[2025-09-23 14:43:41.961] SBL2:1210.0.1.0 [2025-09-23 14:43:41.973] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:43:41.973] j-A [2025-09-23 14:43:41.973] The R5 Autosar Classic is running [2025-09-23 14:43:41.973] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:43:41.973] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:43:41.973] INIT: version 2.96 booting [2025-09-23 14:43:41.973] INIT: Entering runlevel: 5 [2025-09-23 14:43:41.973] mtd24 attached [2025-09-23 14:43:41.973] mtd28 attached [2025-09-23 14:43:41.973] mtd32 attached [2025-09-23 14:43:41.973] ubi0:textures is mounted. [2025-09-23 14:43:41.973] RTNETLINK answers: File exists [2025-09-23 14:43:41.973] ubi2:dml_code is mounted. [2025-09-23 14:43:41.973] ubi1:animations is mounted. [2025-09-23 14:43:41.973] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:43:41.973] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:43:41.973] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:43:41.973] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:43:41.973] data.LB_FadeInType0=100 [2025-09-23 14:43:41.973] data.CHLH_FadeInType0=0 [2025-09-23 14:43:41.973] data.WU_FadeInDelay=0 [2025-09-23 14:43:41.973] max_time_out=0 [2025-09-23 14:43:41.973] No splash screen [2025-09-23 14:43:41.973] stop dss Done [2025-09-23 14:43:41.973] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:43:41.973] /dev/mem opened. [2025-09-23 14:43:41.973] Memory mapped at address 0xffffa4671000. [2025-09-23 14:43:41.973] Read at address 0x00600018 (0xffffa4671018): 0x00000000 [2025-09-23 14:43:41.973] Write at address 0x00600018 (0xffffa4671018): 0x00400040, readback 0x00400040 [2025-09-23 14:43:41.973] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:43:41.973] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:43:41.973] Loaded PowerVR consumer services. [2025-09-23 14:43:41.977] 512+0 records in [2025-09-23 14:43:41.977] 512+0 records out [2025-09-23 14:43:41.977] Waiting data available... [2025-09-23 14:43:41.977] Starting syslogd/klogd: done [2025-09-23 14:43:41.977] DML Start [2025-09-23 14:43:41.977] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:43:41.977] DML res1: 0 [2025-09-23 14:43:41.977] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:43:41.977] Read Success [2025-09-23 14:43:41.977] Verifying certificate... [2025-09-23 14:43:41.977] Verified OK [2025-09-23 14:43:41.977] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:43:41.977] Verified OK [2025-09-23 14:43:41.977] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:43:41.977] Verified OK [2025-09-23 14:43:41.977] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:43:41.977] fs.protected_hardlinks = 1 [2025-09-23 14:43:41.977] fs.protected_symlinks = 1 [2025-09-23 14:43:41.977] kernel.modules_disabled = 1 [2025-09-23 14:43:41.977] [2025-09-23 14:43:41.977] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:43:41.977] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:43:45.040] SBL1:1210.0.1.0 [2025-09-23 14:43:45.088] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:43:46.655] SBL2:1210.0.1.0 [2025-09-23 14:43:46.686] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:43:46.798] j-A [2025-09-23 14:43:54.174] The R5 Autosar Classic is running [2025-09-23 14:43:54.174] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:43:54.174] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:43:54.781] INIT: version 2.96 booting [2025-09-23 14:43:54.893] INIT: Entering runlevel: 5 [2025-09-23 14:43:55.053] mtd32 attached [2025-09-23 14:43:55.053] mtd24 attached [2025-09-23 14:43:55.069] mtd28 attached [2025-09-23 14:43:55.149] RTNETLINK answers: File exists [2025-09-23 14:43:55.149] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:43:55.149] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:43:55.149] ubi0:dml_code is mounted. [2025-09-23 14:43:55.149] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:43:55.149] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:43:55.149] ubi2:animations is mounted. [2025-09-23 14:43:55.149] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:43:55.149] ubi1:textures is mounted. [2025-09-23 14:43:55.224] data.LB_FadeInType0=100 [2025-09-23 14:43:55.224] data.CHLH_FadeInType0=0 [2025-09-23 14:43:55.224] data.WU_FadeInDelay=0 [2025-09-23 14:43:55.224] max_time_out=0 [2025-09-23 14:43:55.224] No splash screen [2025-09-23 14:43:55.224] stop dss Done [2025-09-23 14:43:55.225] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:43:55.225] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:43:55.260] /dev/mem opened. [2025-09-23 14:43:55.260] Memory mapped at address 0xffff8f029000. [2025-09-23 14:43:55.260] Read at address 0x00600018 (0xffff8f029018): 0x00000000 [2025-09-23 14:43:55.260] Write at address 0x00600018 (0xffff8f029018): 0x00400040, readback 0x00400040 [2025-09-23 14:43:55.419] Loaded PowerVR consumer services. [2025-09-23 14:43:55.452] 512+0 records in [2025-09-23 14:43:55.452] 512+0 records out [2025-09-23 14:43:55.500] Waiting data available... [2025-09-23 14:43:55.500] Starting syslogd/klogd: done [2025-09-23 14:43:55.516] DML Start [2025-09-23 14:43:55.707] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:43:55.931] DML res1: 0 [2025-09-23 14:43:56.464] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:43:56.464] Read Success [2025-09-23 14:43:56.464] Verifying certificate... [2025-09-23 14:43:56.704] Verified OK [2025-09-23 14:43:56.720] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:43:58.456] Verified OK [2025-09-23 14:43:58.456] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:43:58.964] Verified OK [2025-09-23 14:43:58.964] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:44:01.523] fs.protected_hardlinks = 1 [2025-09-23 14:44:01.523] fs.protected_symlinks = 1 [2025-09-23 14:44:01.806] kernel.modules_disabled = 1 [2025-09-23 14:44:01.806] [2025-09-23 14:44:01.806] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:44:03.042] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:44:11.032] SBL1:1210.0.1.0 [2025-09-23 14:44:11.063] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:44:12.646] SBL2:1210.0.1.0 [2025-09-23 14:44:12.678] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 14:44:12.774] j-A [2025-09-23 14:44:20.128] The R5 Autosar Classic is running [2025-09-23 14:44:20.168] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:44:20.168] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:44:20.758] INIT: version 2.96 booting [2025-09-23 14:44:20.870] INIT: Entering runlevel: 5 [2025-09-23 14:44:21.015] mtd24 attached [2025-09-23 14:44:21.183] mtd32 attached [2025-09-23 14:44:21.184] mtd28 attached [2025-09-23 14:44:21.184] RTNETLINK answers: File exists [2025-09-23 14:44:21.184] ubi0:textures is mounted. [2025-09-23 14:44:21.184] ubi2:animations is mounted. [2025-09-23 14:44:21.184] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:44:21.184] ubi1:dml_code is mounted. [2025-09-23 14:44:21.184] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:44:21.184] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:44:21.184] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:44:21.184] data.LB_FadeInType0=100 [2025-09-23 14:44:21.184] data.CHLH_FadeInType0=0 [2025-09-23 14:44:21.184] data.WU_FadeInDelay=0 [2025-09-23 14:44:21.184] max_time_out=0 [2025-09-23 14:44:21.184] No splash screen [2025-09-23 14:44:21.184] stop dss Done [2025-09-23 14:44:21.184] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:44:21.235] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:44:21.235] /dev/mem opened. [2025-09-23 14:44:21.235] Memory mapped at address 0xffffa9bf5000. [2025-09-23 14:44:21.235] Read at address 0x00600018 (0xffffa9bf5018): 0x00000000 [2025-09-23 14:44:21.235] Write at address 0x00600018 (0xffffa9bf5018): 0x00400040, readback 0x00400040 [2025-09-23 14:44:21.235] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:44:21.411] Loaded PowerVR consumer services. [2025-09-23 14:44:21.427] 512+0 records in [2025-09-23 14:44:21.443] 512+0 records out [2025-09-23 14:44:21.474] Starting syslogd/klogd: Waiting data available... [2025-09-23 14:44:21.490] done [2025-09-23 14:44:21.490] DML Start [2025-09-23 14:44:21.666] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:44:21.890] DML res1: 0 [2025-09-23 14:44:22.401] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:44:22.417] Read Success [2025-09-23 14:44:22.417] Verifying certificate... [2025-09-23 14:44:22.689] Verified OK [2025-09-23 14:44:22.705] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:44:24.423] Verified OK [2025-09-23 14:44:24.423] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:44:24.935] Verified OK [2025-09-23 14:44:24.950] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:44:27.605] fs.protected_hardlinks = 1 [2025-09-23 14:44:27.633] fs.protected_symlinks = 1 [2025-09-23 14:44:27.633] kernel.modules_disabled = 1 [2025-09-23 14:44:27.825] [2025-09-23 14:44:27.825] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:44:28.988] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:44:36.964] SBL1:1210.0.1.0 [2025-09-23 14:44:36.997] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:44:38.579] SBL2:1210.0.1.0 [2025-09-23 14:44:38.611] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:44:38.707] j-A [2025-09-23 14:44:46.062] The R5 Autosar Classic is running [2025-09-23 14:44:46.105] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:44:46.105] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:44:46.693] INIT: version 2.96 booting [2025-09-23 14:44:46.805] INIT: Entering runlevel: 5 [2025-09-23 14:44:46.964] mtd24 attached [2025-09-23 14:44:47.106] mtd32 attached [2025-09-23 14:44:47.107] mtd28 attached [2025-09-23 14:44:47.107] ubi0:textures is mounted. [2025-09-23 14:44:47.107] RTNETLINK answers: File exists [2025-09-23 14:44:47.107] ubi2:animations is mounted. [2025-09-23 14:44:47.107] ubi1:dml_code is mounted. [2025-09-23 14:44:47.107] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:44:47.107] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:44:47.107] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:44:47.107] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:44:47.107] data.LB_FadeInType0=100 [2025-09-23 14:44:47.107] data.CHLH_FadeInType0=0 [2025-09-23 14:44:47.107] data.WU_FadeInDelay=0 [2025-09-23 14:44:47.107] max_time_out=0 [2025-09-23 14:44:47.107] No splash screen [2025-09-23 14:44:47.107] stop dss Done [2025-09-23 14:44:47.107] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:44:47.151] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:44:47.151] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:44:47.151] /dev/mem opened. [2025-09-23 14:44:47.151] Memory mapped at address 0xffff805fe000. [2025-09-23 14:44:47.176] Read at address 0x00600018 (0xffff805fe018): 0x00000000 [2025-09-23 14:44:47.176] Write at address 0x00600018 (0xffff805fe018): 0x00400040, readback 0x00400040 [2025-09-23 14:44:47.272] Loaded PowerVR consumer services. [2025-09-23 14:44:47.401] 512+0 records in [2025-09-23 14:44:47.401] 512+0 records out [2025-09-23 14:44:47.416] Waiting data available... [2025-09-23 14:44:47.416] Starting syslogd/klogd: done [2025-09-23 14:44:47.448] DML Start [2025-09-23 14:44:47.624] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:44:47.848] DML res1: 0 [2025-09-23 14:44:48.279] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:44:48.295] Read Success [2025-09-23 14:44:48.295] Verifying certificate... [2025-09-23 14:44:48.520] Verified OK [2025-09-23 14:44:48.536] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:44:50.244] Verified OK [2025-09-23 14:44:50.244] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:44:50.913] Verified OK [2025-09-23 14:44:50.913] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:44:53.583] fs.protected_hardlinks = 1 [2025-09-23 14:44:53.606] fs.protected_symlinks = 1 [2025-09-23 14:44:53.606] kernel.modules_disabled = 1 [2025-09-23 14:44:53.807] [2025-09-23 14:44:53.807] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:44:54.999] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:45:02.897] SBL1:1210.0.1.0 [2025-09-23 14:45:02.944] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:45:04.511] SBL2:1210.0.1.0 [2025-09-23 14:45:04.544] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:45:04.654] j-A [2025-09-23 14:45:12.029] The R5 Autosar Classic is running [2025-09-23 14:45:12.029] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:45:12.029] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:45:12.636] INIT: version 2.96 booting [2025-09-23 14:45:12.747] INIT: Entering runlevel: 5 [2025-09-23 14:45:13.090] mtd28 attached [2025-09-23 14:45:13.090] mtd32 attached [2025-09-23 14:45:13.090] mtd24 attached [2025-09-23 14:45:13.090] ubi0:animations is mounted. [2025-09-23 14:45:13.090] RTNETLINK answers: File exists [2025-09-23 14:45:13.090] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:45:13.090] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:45:13.090] ubi2:textures is mounted. [2025-09-23 14:45:13.090] ubi1:dml_code is mounted. [2025-09-23 14:45:13.090] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:45:13.090] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:45:13.090] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:45:13.090] data.LB_FadeInType0=100 [2025-09-23 14:45:13.090] data.CHLH_FadeInType0=0 [2025-09-23 14:45:13.090] data.WU_FadeInDelay=0 [2025-09-23 14:45:13.090] max_time_out=0 [2025-09-23 14:45:13.090] No splash screen [2025-09-23 14:45:13.090] stop dss Done [2025-09-23 14:45:13.090] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:45:13.090] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:45:13.111] /dev/mem opened. [2025-09-23 14:45:13.111] Memory mapped at address 0xffff9ad52000. [2025-09-23 14:45:13.111] Read at address 0x00600018 (0xffff9ad52018): 0x00000000 [2025-09-23 14:45:13.111] Write at address 0x00600018 (0xffff9ad52018): 0x00400040, readback 0x00400040 [2025-09-23 14:45:13.286] Loaded PowerVR consumer services. [2025-09-23 14:45:13.318] 512+0 records in [2025-09-23 14:45:13.318] 512+0 records out [2025-09-23 14:45:13.365] Starting syslogd/klogd: done [2025-09-23 14:45:13.399] Waiting data available... [2025-09-23 14:45:13.399] DML Start [2025-09-23 14:45:13.590] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:45:14.089] DML res1: 0 [2025-09-23 14:45:14.259] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:45:14.259] Read Success [2025-09-23 14:45:14.259] Verifying certificate... [2025-09-23 14:45:14.547] Verified OK [2025-09-23 14:45:14.562] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:45:16.223] Verified OK [2025-09-23 14:45:16.223] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:45:16.860] Verified OK [2025-09-23 14:45:16.860] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:45:19.449] fs.protected_hardlinks = 1 [2025-09-23 14:45:19.465] fs.protected_symlinks = 1 [2025-09-23 14:45:19.465] kernel.modules_disabled = 1 [2025-09-23 14:45:19.673] [2025-09-23 14:45:19.673] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:45:20.900] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:45:28.832] SBL1:1210.0.1.0 [2025-09-23 14:45:28.864] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:45:30.446] SBL2:1210.0.1.0 [2025-09-23 14:45:30.480] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:45:30.574] j-A [2025-09-23 14:45:37.928] The R5 Autosar Classic is running [2025-09-23 14:45:37.953] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:45:37.953] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:45:38.560] INIT: version 2.96 booting [2025-09-23 14:45:38.673] INIT: Entering runlevel: 5 [2025-09-23 14:45:38.950] mtd32 attached [2025-09-23 14:45:38.950] mtd24 attached [2025-09-23 14:45:38.950] mtd28 attached [2025-09-23 14:45:38.950] RTNETLINK answers: File exists [2025-09-23 14:45:38.950] ubi1:textures is mounted. [2025-09-23 14:45:38.966] ubi0:dml_code is mounted. [2025-09-23 14:45:38.966] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:45:38.966] ubi2:animations is mounted. [2025-09-23 14:45:38.966] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:45:38.966] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:45:38.966] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:45:38.966] data.LB_FadeInType0=100 [2025-09-23 14:45:38.966] data.CHLH_FadeInType0=0 [2025-09-23 14:45:38.966] data.WU_FadeInDelay=0 [2025-09-23 14:45:38.966] max_time_out=0 [2025-09-23 14:45:38.966] No splash screen [2025-09-23 14:45:38.966] stop dss Done [2025-09-23 14:45:38.966] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:45:39.035] /dev/mem opened. [2025-09-23 14:45:39.035] Memory mapped at address 0xffffa70da000. [2025-09-23 14:45:39.035] Read at address 0x00600018 (0xffffa70da018): 0x00000000 [2025-09-23 14:45:39.035] Write at address 0x00600018 (0xffffa70da018): 0x00400040, readback 0x00400040 [2025-09-23 14:45:39.051] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:45:39.051] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:45:39.195] Loaded PowerVR consumer services. [2025-09-23 14:45:39.275] 512+0 records in [2025-09-23 14:45:39.275] 512+0 records out [2025-09-23 14:45:39.291] Waiting data available... [2025-09-23 14:45:39.322] Starting syslogd/klogd: done [2025-09-23 14:45:39.339] DML Start [2025-09-23 14:45:39.498] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:45:39.754] DML res1: 0 [2025-09-23 14:45:40.227] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:45:40.227] Read Success [2025-09-23 14:45:40.227] Verifying certificate... [2025-09-23 14:45:40.496] Verified OK [2025-09-23 14:45:40.496] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:45:42.155] Verified OK [2025-09-23 14:45:42.155] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:45:42.799] Verified OK [2025-09-23 14:45:42.799] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:45:45.470] fs.protected_hardlinks = 1 [2025-09-23 14:45:45.470] fs.protected_symlinks = 1 [2025-09-23 14:45:45.505] kernel.modules_disabled = 1 [2025-09-23 14:45:45.694] [2025-09-23 14:45:45.694] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:45:46.833] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:45:54.747] SBL1:1210.0.1.0 [2025-09-23 14:45:54.795] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:45:56.362] SBL2:1210.0.1.0 [2025-09-23 14:45:56.393] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:45:56.506] j-A [2025-09-23 14:46:03.881] The R5 Autosar Classic is running [2025-09-23 14:46:03.881] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:46:03.881] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:46:04.489] INIT: version 2.96 booting [2025-09-23 14:46:04.601] INIT: Entering runlevel: 5 [2025-09-23 14:46:04.934] mtd32 attached [2025-09-23 14:46:04.934] mtd24 attached [2025-09-23 14:46:04.934] mtd28 attached [2025-09-23 14:46:04.934] RTNETLINK answers: File exists [2025-09-23 14:46:04.934] ubi1:textures is mounted. [2025-09-23 14:46:04.934] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:46:04.934] ubi2:animations is mounted. [2025-09-23 14:46:04.934] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:46:04.934] ubi0:dml_code is mounted. [2025-09-23 14:46:04.934] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:46:04.934] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:46:04.934] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:46:04.934] data.LB_FadeInType0=100 [2025-09-23 14:46:04.934] data.CHLH_FadeInType0=0 [2025-09-23 14:46:04.934] data.WU_FadeInDelay=0 [2025-09-23 14:46:04.934] max_time_out=0 [2025-09-23 14:46:04.934] No splash screen [2025-09-23 14:46:04.934] stop dss Done [2025-09-23 14:46:04.934] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:46:04.962] /dev/mem opened. [2025-09-23 14:46:04.962] Memory mapped at address 0xffff9e0b0000. [2025-09-23 14:46:04.962] Read at address 0x00600018 (0xffff9e0b0018): 0x00000000 [2025-09-23 14:46:04.962] Write at address 0x00600018 (0xffff9e0b0018): 0x00400040, readback 0x00400040 [2025-09-23 14:46:04.962] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:46:05.090] Loaded PowerVR consumer services. [2025-09-23 14:46:05.216] Waiting data available... [2025-09-23 14:46:05.216] 512+0 records in [2025-09-23 14:46:05.216] 512+0 records out [2025-09-23 14:46:05.231] Starting syslogd/klogd: done [2025-09-23 14:46:05.248] DML Start [2025-09-23 14:46:05.455] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:46:05.663] DML res1: 0 [2025-09-23 14:46:06.092] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:46:06.092] Read Success [2025-09-23 14:46:06.092] Verifying certificate... [2025-09-23 14:46:06.315] Verified OK [2025-09-23 14:46:06.331] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:46:07.873] Verified OK [2025-09-23 14:46:07.873] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:46:08.530] Verified OK [2025-09-23 14:46:08.530] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:46:11.324] fs.protected_hardlinks = 1 [2025-09-23 14:46:11.324] fs.protected_symlinks = 1 [2025-09-23 14:46:11.324] kernel.modules_disabled = 1 [2025-09-23 14:46:11.500] [2025-09-23 14:46:11.500] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:46:12.762] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:46:20.660] SBL1:1210.0.1.0 [2025-09-23 14:46:20.692] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:46:22.275] SBL2:1210.0.1.0 [2025-09-23 14:46:22.326] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:46:22.419] j-A [2025-09-23 14:46:29.757] The R5 Autosar Classic is running [2025-09-23 14:46:29.788] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:46:29.788] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:46:30.396] INIT: version 2.96 booting [2025-09-23 14:46:30.507] INIT: Entering runlevel: 5 [2025-09-23 14:46:30.794] mtd24 attached [2025-09-23 14:46:30.794] mtd28 attached [2025-09-23 14:46:30.794] mtd32 attached [2025-09-23 14:46:30.794] ubi0:textures is mounted. [2025-09-23 14:46:30.794] RTNETLINK answers: File exists [2025-09-23 14:46:30.794] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:46:30.794] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:46:30.794] ubi1:animations is mounted. [2025-09-23 14:46:30.794] ubi2:dml_code is mounted. [2025-09-23 14:46:30.794] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:46:30.794] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:46:30.794] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:46:30.794] data.LB_FadeInType0=100 [2025-09-23 14:46:30.794] data.CHLH_FadeInType0=0 [2025-09-23 14:46:30.794] data.WU_FadeInDelay=0 [2025-09-23 14:46:30.794] max_time_out=0 [2025-09-23 14:46:30.794] No splash screen [2025-09-23 14:46:30.794] stop dss Done [2025-09-23 14:46:30.872] /dev/mem opened. [2025-09-23 14:46:30.872] Memory mapped at address 0xffff83251000. [2025-09-23 14:46:30.872] Read at address 0x00600018 (0xffff83251018): 0x00000000 [2025-09-23 14:46:30.872] Write at address 0x00600018 (0xffff83251018): 0x00400040, readback 0x00400040 [2025-09-23 14:46:30.872] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:46:30.872] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:46:31.000] Loaded PowerVR consumer services. [2025-09-23 14:46:31.113] Waiting data available... [2025-09-23 14:46:31.113] 512+0 records in [2025-09-23 14:46:31.113] 512+0 records out [2025-09-23 14:46:31.160] Starting syslogd/klogd: done [2025-09-23 14:46:31.176] DML Start [2025-09-23 14:46:31.336] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:46:31.809] DML res1: 0 [2025-09-23 14:46:31.975] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:46:31.997] Read Success [2025-09-23 14:46:31.997] Verifying certificate... [2025-09-23 14:46:32.253] Verified OK [2025-09-23 14:46:32.269] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:46:34.000] Verified OK [2025-09-23 14:46:34.000] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:46:34.655] Verified OK [2025-09-23 14:46:34.655] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:46:37.292] fs.protected_hardlinks = 1 [2025-09-23 14:46:37.293] fs.protected_symlinks = 1 [2025-09-23 14:46:37.308] kernel.modules_disabled = 1 [2025-09-23 14:46:37.500] [2025-09-23 14:46:37.500] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:46:38.673] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:46:46.571] SBL1:1210.0.1.0 [2025-09-23 14:46:46.619] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:46:48.185] SBL2:1210.0.1.0 [2025-09-23 14:46:48.231] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:46:48.330] j-A [2025-09-23 14:46:55.685] The R5 Autosar Classic is running [2025-09-23 14:46:55.685] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:46:55.706] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:46:56.313] INIT: version 2.96 booting [2025-09-23 14:46:56.424] INIT: Entering runlevel: 5 [2025-09-23 14:46:56.585] mtd28 attached [2025-09-23 14:46:56.585] mtd24 attached [2025-09-23 14:46:56.601] mtd32 attached [2025-09-23 14:46:56.617] ubi0:animations is mounted. [2025-09-23 14:46:56.755] ubi1:textures is mounted. [2025-09-23 14:46:56.755] RTNETLINK answers: File exists [2025-09-23 14:46:56.756] ubi2:dml_code is mounted. [2025-09-23 14:46:56.756] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:46:56.756] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:46:56.756] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:46:56.756] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:46:56.756] data.LB_FadeInType0=100 [2025-09-23 14:46:56.756] data.CHLH_FadeInType0=0 [2025-09-23 14:46:56.756] data.WU_FadeInDelay=0 [2025-09-23 14:46:56.756] max_time_out=0 [2025-09-23 14:46:56.756] No splash screen [2025-09-23 14:46:56.756] stop dss Done [2025-09-23 14:46:56.756] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:46:56.775] /dev/mem opened. [2025-09-23 14:46:56.775] Memory mapped at address 0xffffa0f04000. [2025-09-23 14:46:56.775] Read at address 0x00600018 (0xffffa0f04018): 0x00000000 [2025-09-23 14:46:56.775] Write at address 0x00600018 (0xffffa0f04018): 0x00400040, readback 0x00400040 [2025-09-23 14:46:56.802] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:46:56.802] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:46:56.962] Loaded PowerVR consumer services. [2025-09-23 14:46:56.978] 512+0 records in [2025-09-23 14:46:56.995] 512+0 records out [2025-09-23 14:46:57.011] Starting syslogd/klogd: Waiting data available... [2025-09-23 14:46:57.043] done [2025-09-23 14:46:57.043] DML Start [2025-09-23 14:46:57.202] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:46:57.394] DML res1: 0 [2025-09-23 14:46:58.013] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:46:58.013] Read Success [2025-09-23 14:46:58.013] Verifying certificate... [2025-09-23 14:46:58.286] Verified OK [2025-09-23 14:46:58.301] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:46:59.909] Verified OK [2025-09-23 14:46:59.909] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:47:00.460] Verified OK [2025-09-23 14:47:00.460] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:47:02.954] fs.protected_hardlinks = 1 [2025-09-23 14:47:02.954] fs.protected_symlinks = 1 [2025-09-23 14:47:02.981] kernel.modules_disabled = 1 [2025-09-23 14:47:03.162] [2025-09-23 14:47:03.162] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:47:04.534] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:47:12.460] SBL1:1210.0.1.0 [2025-09-23 14:47:12.492] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:47:14.074] SBL2:1210.0.1.0 [2025-09-23 14:47:14.106] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:47:14.202] j-A [2025-09-23 14:47:21.558] The R5 Autosar Classic is running [2025-09-23 14:47:21.580] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:47:21.580] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:47:22.187] INIT: version 2.96 booting [2025-09-23 14:47:22.299] INIT: Entering runlevel: 5 [2025-09-23 14:47:22.459] mtd24 attached [2025-09-23 14:47:22.459] mtd28 attached [2025-09-23 14:47:22.475] mtd32 attached [2025-09-23 14:47:22.507] ubi0:textures is mounted. [2025-09-23 14:47:22.629] ubi1:animations is mounted. [2025-09-23 14:47:22.629] RTNETLINK answers: File exists [2025-09-23 14:47:22.630] ubi2:dml_code is mounted. [2025-09-23 14:47:22.630] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:47:22.630] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:47:22.630] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:47:22.630] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:47:22.630] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:47:22.630] data.LB_FadeInType0=100 [2025-09-23 14:47:22.630] data.CHLH_FadeInType0=0 [2025-09-23 14:47:22.630] data.WU_FadeInDelay=0 [2025-09-23 14:47:22.630] max_time_out=0 [2025-09-23 14:47:22.630] No splash screen [2025-09-23 14:47:22.630] stop dss Done [2025-09-23 14:47:22.684] /dev/mem opened. [2025-09-23 14:47:22.684] Memory mapped at address 0xffff99378000. [2025-09-23 14:47:22.684] Read at address 0x00600018 (0xffff99378018): 0x00000000 [2025-09-23 14:47:22.684] Write at address 0x00600018 (0xffff99378018): 0x00400040, readback 0x00400040 [2025-09-23 14:47:22.684] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:47:22.684] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:47:22.749] Loaded PowerVR consumer services. [2025-09-23 14:47:22.860] 512+0 records in [2025-09-23 14:47:22.860] 512+0 records out [2025-09-23 14:47:22.908] Starting syslogd/klogd: Waiting data available... [2025-09-23 14:47:22.924] done [2025-09-23 14:47:22.924] DML Start [2025-09-23 14:47:23.115] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:47:23.356] DML res1: 0 [2025-09-23 14:47:23.786] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:47:23.786] Read Success [2025-09-23 14:47:23.786] Verifying certificate... [2025-09-23 14:47:24.024] Verified OK [2025-09-23 14:47:24.024] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:47:25.773] Verified OK [2025-09-23 14:47:25.773] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:47:26.434] Verified OK [2025-09-23 14:47:26.434] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:47:29.071] fs.protected_hardlinks = 1 [2025-09-23 14:47:29.071] fs.protected_symlinks = 1 [2025-09-23 14:47:29.071] kernel.modules_disabled = 1 [2025-09-23 14:47:29.264] [2025-09-23 14:47:29.264] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:47:30.421] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:47:38.356] SBL1:1210.0.1.0 [2025-09-23 14:47:38.388] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:47:39.971] SBL2:1210.0.1.0 [2025-09-23 14:47:40.012] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:47:40.100] j-A [2025-09-23 14:47:47.455] The R5 Autosar Classic is running [2025-09-23 14:47:47.477] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:47:47.477] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:47:48.083] INIT: version 2.96 booting [2025-09-23 14:47:48.495] INIT: Entering runlevel: 5 [2025-09-23 14:47:48.495] mtd24 attached [2025-09-23 14:47:48.495] mtd28 attached [2025-09-23 14:47:48.495] mtd32 attached [2025-09-23 14:47:48.495] ubi0:textures is mounted. [2025-09-23 14:47:48.495] RTNETLINK answers: File exists [2025-09-23 14:47:48.495] ubi1:animations is mounted. [2025-09-23 14:47:48.495] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:47:48.495] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:47:48.495] ubi2:dml_code is mounted. [2025-09-23 14:47:48.495] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:47:48.495] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:47:48.495] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:47:48.495] data.LB_FadeInType0=100 [2025-09-23 14:47:48.495] data.CHLH_FadeInType0=0 [2025-09-23 14:47:48.495] data.WU_FadeInDelay=0 [2025-09-23 14:47:48.495] max_time_out=0 [2025-09-23 14:47:48.495] No splash screen [2025-09-23 14:47:48.495] stop dss Done [2025-09-23 14:47:48.525] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:47:48.525] /dev/mem opened. [2025-09-23 14:47:48.525] Memory mapped at address 0xffffa3a4b000. [2025-09-23 14:47:48.557] Read at address 0x00600018 (0xffffa3a4b018): 0x00000000 [2025-09-23 14:47:48.557] Write at address 0x00600018 (0xffffa3a4b018): 0x00400040, readback 0x00400040 [2025-09-23 14:47:48.557] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:47:48.636] Loaded PowerVR consumer services. [2025-09-23 14:47:48.804] 512+0 records in [2025-09-23 14:47:48.804] 512+0 records out [2025-09-23 14:47:48.804] Waiting data available... [2025-09-23 14:47:48.836] Starting syslogd/klogd: done [2025-09-23 14:47:48.868] DML Start [2025-09-23 14:47:49.029] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:47:49.495] DML res1: 0 [2025-09-23 14:47:49.725] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:47:49.725] Read Success [2025-09-23 14:47:49.725] Verifying certificate... [2025-09-23 14:47:49.997] Verified OK [2025-09-23 14:47:50.013] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:47:51.556] Verified OK [2025-09-23 14:47:51.556] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:47:52.282] Verified OK [2025-09-23 14:47:52.282] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:47:54.982] fs.protected_hardlinks = 1 [2025-09-23 14:47:54.982] fs.protected_symlinks = 1 [2025-09-23 14:47:54.998] kernel.modules_disabled = 1 [2025-09-23 14:47:55.190] [2025-09-23 14:47:55.190] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:47:56.395] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:48:04.235] SBL1:1210.0.1.0 [2025-09-23 14:48:04.267] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:48:05.850] SBL2:1210.0.1.0 [2025-09-23 14:48:05.888] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:48:05.977] j-A [2025-09-23 14:48:13.333] The R5 Autosar Classic is running [2025-09-23 14:48:13.357] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:48:13.357] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:48:13.964] INIT: version 2.96 booting [2025-09-23 14:48:14.076] INIT: Entering runlevel: 5 [2025-09-23 14:48:14.236] mtd24 attached [2025-09-23 14:48:14.236] mtd28 attached [2025-09-23 14:48:14.252] mtd32 attached [2025-09-23 14:48:14.374] ubi0:textures is mounted. [2025-09-23 14:48:14.374] ubi1:animations is mounted. [2025-09-23 14:48:14.374] RTNETLINK answers: File exists [2025-09-23 14:48:14.374] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:48:14.374] ubi2:dml_code is mounted. [2025-09-23 14:48:14.374] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:48:14.374] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:48:14.374] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:48:14.374] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:48:14.374] data.LB_FadeInType0=100 [2025-09-23 14:48:14.374] data.CHLH_FadeInType0=0 [2025-09-23 14:48:14.374] data.WU_FadeInDelay=0 [2025-09-23 14:48:14.374] max_time_out=0 [2025-09-23 14:48:14.374] No splash screen [2025-09-23 14:48:14.374] stop dss Done [2025-09-23 14:48:14.383] /dev/mem opened. [2025-09-23 14:48:14.383] Memory mapped at address 0xffff91a8f000. [2025-09-23 14:48:14.409] Read at address 0x00600018 (0xffff91a8f018): 0x00000000 [2025-09-23 14:48:14.409] Write at address 0x00600018 (0xffff91a8f018): 0x00400040, readback 0x00400040 [2025-09-23 14:48:14.440] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:48:14.457] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:48:14.504] Loaded PowerVR consumer services. [2025-09-23 14:48:14.649] Waiting data available... [2025-09-23 14:48:14.649] 512+0 records in [2025-09-23 14:48:14.665] 512+0 records out [2025-09-23 14:48:14.697] Starting syslogd/klogd: done [2025-09-23 14:48:14.713] DML Start [2025-09-23 14:48:14.889] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:48:15.128] DML res1: 0 [2025-09-23 14:48:15.574] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:48:15.574] Read Success [2025-09-23 14:48:15.574] Verifying certificate... [2025-09-23 14:48:15.798] Verified OK [2025-09-23 14:48:15.814] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:48:17.589] Verified OK [2025-09-23 14:48:17.589] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:48:18.149] Verified OK [2025-09-23 14:48:18.149] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:48:20.642] fs.protected_hardlinks = 1 [2025-09-23 14:48:20.658] fs.protected_symlinks = 1 [2025-09-23 14:48:20.658] kernel.modules_disabled = 1 [2025-09-23 14:48:20.850] [2025-09-23 14:48:20.850] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:48:22.227] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:48:30.093] SBL1:1210.0.1.0 [2025-09-23 14:48:30.141] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:48:31.707] SBL2:1210.0.1.0 [2025-09-23 14:48:31.739] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:48:31.851] j-A [2025-09-23 14:48:39.226] The R5 Autosar Classic is running [2025-09-23 14:48:39.226] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:48:39.226] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:48:39.834] INIT: version 2.96 booting [2025-09-23 14:48:39.946] INIT: Entering runlevel: 5 [2025-09-23 14:48:40.278] mtd24 attached [2025-09-23 14:48:40.278] mtd28 attached [2025-09-23 14:48:40.278] mtd32 attached [2025-09-23 14:48:40.278] RTNETLINK answers: File exists [2025-09-23 14:48:40.278] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:48:40.278] ubi0:textures is mounted. [2025-09-23 14:48:40.278] ubi1:animations is mounted. [2025-09-23 14:48:40.278] ubi2:dml_code is mounted. [2025-09-23 14:48:40.278] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:48:40.278] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:48:40.278] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:48:40.278] data.LB_FadeInType0=100 [2025-09-23 14:48:40.278] data.CHLH_FadeInType0=0 [2025-09-23 14:48:40.278] data.WU_FadeInDelay=0 [2025-09-23 14:48:40.278] max_time_out=0 [2025-09-23 14:48:40.278] No splash screen [2025-09-23 14:48:40.278] stop dss Done [2025-09-23 14:48:40.278] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:48:40.278] /dev/mem opened. [2025-09-23 14:48:40.292] Memory mapped at address 0xffff916b6000. [2025-09-23 14:48:40.292] Read at address 0x00600018 (0xffff916b6018): 0x00000000 [2025-09-23 14:48:40.292] Write at address 0x00600018 (0xffff916b6018): 0x00400040, readback 0x00400040 [2025-09-23 14:48:40.324] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:48:40.341] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:48:40.501] Loaded PowerVR consumer services. [2025-09-23 14:48:40.546] Waiting data available... [2025-09-23 14:48:40.546] 512+0 records in [2025-09-23 14:48:40.546] 512+0 records out [2025-09-23 14:48:40.578] Starting syslogd/klogd: done [2025-09-23 14:48:40.594] DML Start [2025-09-23 14:48:40.770] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:48:40.995] DML res1: 0 [2025-09-23 14:48:41.471] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:48:41.471] Read Success [2025-09-23 14:48:41.471] Verifying certificate... [2025-09-23 14:48:41.695] Verified OK [2025-09-23 14:48:41.711] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:48:43.421] Verified OK [2025-09-23 14:48:43.421] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:48:44.017] Verified OK [2025-09-23 14:48:44.017] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:48:46.732] fs.protected_hardlinks = 1 [2025-09-23 14:48:46.732] fs.protected_symlinks = 1 [2025-09-23 14:48:46.732] kernel.modules_disabled = 1 [2025-09-23 14:48:46.940] [2025-09-23 14:48:46.940] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:48:48.107] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:48:55.970] SBL1:1210.0.1.0 [2025-09-23 14:48:56.018] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:48:57.585] SBL2:1210.0.1.0 [2025-09-23 14:48:57.616] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:48:57.729] j-A [2025-09-23 14:49:05.104] The R5 Autosar Classic is running [2025-09-23 14:49:05.104] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:49:05.104] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:49:05.711] INIT: version 2.96 booting [2025-09-23 14:49:05.824] INIT: Entering runlevel: 5 [2025-09-23 14:49:06.138] mtd24 attached [2025-09-23 14:49:06.138] mtd28 attached [2025-09-23 14:49:06.138] mtd32 attached [2025-09-23 14:49:06.138] RTNETLINK answers: File exists [2025-09-23 14:49:06.138] ubi0:textures is mounted. [2025-09-23 14:49:06.138] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:49:06.138] ubi1:animations is mounted. [2025-09-23 14:49:06.138] ubi2:dml_code is mounted. [2025-09-23 14:49:06.138] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:49:06.138] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:49:06.138] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:49:06.138] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:49:06.138] data.LB_FadeInType0=100 [2025-09-23 14:49:06.138] data.CHLH_FadeInType0=0 [2025-09-23 14:49:06.138] data.WU_FadeInDelay=0 [2025-09-23 14:49:06.138] max_time_out=0 [2025-09-23 14:49:06.138] No splash screen [2025-09-23 14:49:06.138] stop dss Done [2025-09-23 14:49:06.168] /dev/mem opened. [2025-09-23 14:49:06.168] Memory mapped at address 0xffff9e6e8000. [2025-09-23 14:49:06.168] Read at address 0x00600018 (0xffff9e6e8018): 0x00000000 [2025-09-23 14:49:06.168] Write at address 0x00600018 (0xffff9e6e8018): 0x00400040, readback 0x00400040 [2025-09-23 14:49:06.183] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:49:06.199] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:49:06.376] Loaded PowerVR consumer services. [2025-09-23 14:49:06.408] 512+0 records in [2025-09-23 14:49:06.408] 512+0 records out [2025-09-23 14:49:06.455] Starting syslogd/klogd: done [2025-09-23 14:49:06.503] Waiting data available... [2025-09-23 14:49:06.503] DML Start [2025-09-23 14:49:06.647] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:49:06.855] DML res1: 0 [2025-09-23 14:49:07.380] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:49:07.380] Read Success [2025-09-23 14:49:07.380] Verifying certificate... [2025-09-23 14:49:07.652] Verified OK [2025-09-23 14:49:07.652] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:49:09.235] Verified OK [2025-09-23 14:49:09.235] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:49:09.858] Verified OK [2025-09-23 14:49:09.858] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:49:12.577] fs.protected_hardlinks = 1 [2025-09-23 14:49:12.577] fs.protected_symlinks = 1 [2025-09-23 14:49:12.577] kernel.modules_disabled = 1 [2025-09-23 14:49:12.735] [2025-09-23 14:49:12.735] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:49:13.993] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:49:21.849] SBL1:1210.0.1.0 [2025-09-23 14:49:21.897] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:49:23.464] SBL2:1210.0.1.0 [2025-09-23 14:49:23.514] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:49:23.608] j-A [2025-09-23 14:49:30.981] The R5 Autosar Classic is running [2025-09-23 14:49:30.981] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:49:30.981] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:49:31.587] INIT: version 2.96 booting [2025-09-23 14:49:31.700] INIT: Entering runlevel: 5 [2025-09-23 14:49:32.013] mtd24 attached [2025-09-23 14:49:32.013] mtd28 attached [2025-09-23 14:49:32.013] mtd32 attached [2025-09-23 14:49:32.013] ubi0:textures is mounted. [2025-09-23 14:49:32.013] RTNETLINK answers: File exists [2025-09-23 14:49:32.013] ubi1:animations is mounted. [2025-09-23 14:49:32.013] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:49:32.013] ubi2:dml_code is mounted. [2025-09-23 14:49:32.013] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:49:32.013] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:49:32.013] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:49:32.013] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:49:32.013] data.LB_FadeInType0=100 [2025-09-23 14:49:32.013] data.CHLH_FadeInType0=0 [2025-09-23 14:49:32.013] data.WU_FadeInDelay=0 [2025-09-23 14:49:32.013] max_time_out=0 [2025-09-23 14:49:32.013] No splash screen [2025-09-23 14:49:32.013] stop dss Done [2025-09-23 14:49:32.069] /dev/mem opened. [2025-09-23 14:49:32.069] Memory mapped at address 0xffff98416000. [2025-09-23 14:49:32.069] Read at address 0x00600018 (0xffff98416018): 0x00000000 [2025-09-23 14:49:32.069] Write at address 0x00600018 (0xffff98416018): 0x00400040, readback 0x00400040 [2025-09-23 14:49:32.069] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:49:32.069] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:49:32.245] Loaded PowerVR consumer services. [2025-09-23 14:49:32.277] 512+0 records in [2025-09-23 14:49:32.277] 512+0 records out [2025-09-23 14:49:32.309] Starting syslogd/klogd: Waiting data available... [2025-09-23 14:49:32.326] done [2025-09-23 14:49:32.342] DML Start [2025-09-23 14:49:32.501] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:49:32.726] DML res1: 0 [2025-09-23 14:49:33.189] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:49:33.210] Read Success [2025-09-23 14:49:33.210] Verifying certificate... [2025-09-23 14:49:33.498] Verified OK [2025-09-23 14:49:33.514] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:49:35.128] Verified OK [2025-09-23 14:49:35.128] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:49:35.716] Verified OK [2025-09-23 14:49:35.716] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:49:38.435] fs.protected_hardlinks = 1 [2025-09-23 14:49:38.451] fs.protected_symlinks = 1 [2025-09-23 14:49:38.451] kernel.modules_disabled = 1 [2025-09-23 14:49:38.658] [2025-09-23 14:49:38.658] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:49:39.837] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:49:47.694] SBL1:1210.0.1.0 [2025-09-23 14:49:47.726] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:49:49.309] SBL2:1210.0.1.0 [2025-09-23 14:49:49.357] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:49:49.452] j-A [2025-09-23 14:49:56.791] The R5 Autosar Classic is running [2025-09-23 14:49:56.816] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:49:56.816] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:49:57.424] INIT: version 2.96 booting [2025-09-23 14:49:57.536] INIT: Entering runlevel: 5 [2025-09-23 14:49:57.825] mtd24 attached [2025-09-23 14:49:57.825] mtd32 attached [2025-09-23 14:49:57.825] mtd28 attached [2025-09-23 14:49:57.825] RTNETLINK answers: File exists [2025-09-23 14:49:57.825] ubi0:textures is mounted. [2025-09-23 14:49:57.825] ubi1:dml_code is mounted. [2025-09-23 14:49:57.825] ubi2:animations is mounted. [2025-09-23 14:49:57.825] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:49:57.825] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:49:57.825] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:49:57.825] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:49:57.825] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:49:57.827] data.LB_FadeInType0=100 [2025-09-23 14:49:57.827] data.CHLH_FadeInType0=0 [2025-09-23 14:49:57.827] data.WU_FadeInDelay=0 [2025-09-23 14:49:57.827] max_time_out=0 [2025-09-23 14:49:57.827] No splash screen [2025-09-23 14:49:57.827] stop dss Done [2025-09-23 14:49:57.915] /dev/mem opened. [2025-09-23 14:49:57.915] Memory mapped at address 0xffffb88db000. [2025-09-23 14:49:57.915] Read at address 0x00600018 (0xffffb88db018): 0x00000000 [2025-09-23 14:49:57.915] Write at address 0x00600018 (0xffffb88db018): 0x00400040, readback 0x00400040 [2025-09-23 14:49:57.915] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:49:57.915] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:49:58.028] Loaded PowerVR consumer services. [2025-09-23 14:49:58.108] 512+0 records in [2025-09-23 14:49:58.108] 512+0 records out [2025-09-23 14:49:58.171] Waiting data available... [2025-09-23 14:49:58.171] Starting syslogd/klogd: done [2025-09-23 14:49:58.187] DML Start [2025-09-23 14:49:58.331] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:49:58.539] DML res1: 0 [2025-09-23 14:49:59.034] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:49:59.051] Read Success [2025-09-23 14:49:59.051] Verifying certificate... [2025-09-23 14:49:59.323] Verified OK [2025-09-23 14:49:59.338] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:50:00.953] Verified OK [2025-09-23 14:50:00.953] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:50:01.603] Verified OK [2025-09-23 14:50:01.603] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:50:04.289] fs.protected_hardlinks = 1 [2025-09-23 14:50:04.305] fs.protected_symlinks = 1 [2025-09-23 14:50:04.305] kernel.modules_disabled = 1 [2025-09-23 14:50:04.497] [2025-09-23 14:50:04.497] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:50:05.665] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:50:13.526] SBL1:1210.0.1.0 [2025-09-23 14:50:13.574] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:50:15.140] SBL2:1210.0.1.0 [2025-09-23 14:50:15.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:50:15.284] j-A [2025-09-23 14:50:22.639] The R5 Autosar Classic is running [2025-09-23 14:50:22.661] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:50:22.661] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:50:23.269] INIT: version 2.96 booting [2025-09-23 14:50:23.380] INIT: Entering runlevel: 5 [2025-09-23 14:50:23.540] mtd32 attached [2025-09-23 14:50:23.540] mtd28 attached [2025-09-23 14:50:23.556] mtd24 attached [2025-09-23 14:50:23.605] RTNETLINK answers: File exists [2025-09-23 14:50:23.680] ubi1:animations is mounted. [2025-09-23 14:50:23.680] ubi0:dml_code is mounted. [2025-09-23 14:50:23.680] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:50:23.680] ubi2:textures is mounted. [2025-09-23 14:50:23.680] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:50:23.680] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:50:23.680] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:50:23.680] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:50:23.680] data.LB_FadeInType0=100 [2025-09-23 14:50:23.680] data.CHLH_FadeInType0=0 [2025-09-23 14:50:23.680] data.WU_FadeInDelay=0 [2025-09-23 14:50:23.680] max_time_out=0 [2025-09-23 14:50:23.680] No splash screen [2025-09-23 14:50:23.680] stop dss Done [2025-09-23 14:50:23.717] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:50:23.755] /dev/mem opened. [2025-09-23 14:50:23.755] Memory mapped at address 0xffff9b1af000. [2025-09-23 14:50:23.755] Read at address 0x00600018 (0xffff9b1af018): 0x00000000 [2025-09-23 14:50:23.755] Write at address 0x00600018 (0xffff9b1af018): 0x00400040, readback 0x00400040 [2025-09-23 14:50:23.755] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:50:23.819] Loaded PowerVR consumer services. [2025-09-23 14:50:23.963] 512+0 records in [2025-09-23 14:50:23.963] 512+0 records out [2025-09-23 14:50:23.979] Waiting data available... [2025-09-23 14:50:23.995] Starting syslogd/klogd: done [2025-09-23 14:50:24.011] DML Start [2025-09-23 14:50:24.187] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:50:24.684] DML res1: 0 [2025-09-23 14:50:24.874] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:50:24.895] Read Success [2025-09-23 14:50:24.895] Verifying certificate... [2025-09-23 14:50:25.135] Verified OK [2025-09-23 14:50:25.151] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:50:26.795] Verified OK [2025-09-23 14:50:26.795] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:50:27.461] Verified OK [2025-09-23 14:50:27.461] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:50:30.084] fs.protected_hardlinks = 1 [2025-09-23 14:50:30.100] fs.protected_symlinks = 1 [2025-09-23 14:50:30.100] kernel.modules_disabled = 1 [2025-09-23 14:50:30.291] [2025-09-23 14:50:30.291] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:50:31.523] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:50:39.405] SBL1:1210.0.1.0 [2025-09-23 14:50:39.437] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:50:41.020] SBL2:1210.0.1.0 [2025-09-23 14:50:41.051] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:50:41.164] j-A [2025-09-23 14:50:48.501] The R5 Autosar Classic is running [2025-09-23 14:50:48.527] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:50:48.527] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:50:49.134] INIT: version 2.96 booting [2025-09-23 14:50:49.246] INIT: Entering runlevel: 5 [2025-09-23 14:50:49.544] mtd32 attached [2025-09-23 14:50:49.544] mtd24 attached [2025-09-23 14:50:49.544] mtd28 attached [2025-09-23 14:50:49.544] RTNETLINK answers: File exists [2025-09-23 14:50:49.544] ubi1:textures is mounted. [2025-09-23 14:50:49.544] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:50:49.544] ubi0:dml_code is mounted. [2025-09-23 14:50:49.544] ubi2:animations is mounted. [2025-09-23 14:50:49.544] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:50:49.544] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:50:49.544] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:50:49.544] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:50:49.544] data.LB_FadeInType0=100 [2025-09-23 14:50:49.544] data.CHLH_FadeInType0=0 [2025-09-23 14:50:49.544] data.WU_FadeInDelay=0 [2025-09-23 14:50:49.544] max_time_out=0 [2025-09-23 14:50:49.544] No splash screen [2025-09-23 14:50:49.544] stop dss Done [2025-09-23 14:50:49.580] /dev/mem opened. [2025-09-23 14:50:49.618] Memory mapped at address 0xffffb92b1000. [2025-09-23 14:50:49.618] Read at address 0x00600018 (0xffffb92b1018): 0x00000000 [2025-09-23 14:50:49.618] Write at address 0x00600018 (0xffffb92b1018): 0x00400040, readback 0x00400040 [2025-09-23 14:50:49.618] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:50:49.618] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:50:49.778] Loaded PowerVR consumer services. [2025-09-23 14:50:49.810] 512+0 records in [2025-09-23 14:50:49.810] 512+0 records out [2025-09-23 14:50:49.841] Starting syslogd/klogd: done [2025-09-23 14:50:49.889] Waiting data available... [2025-09-23 14:50:49.889] DML Start [2025-09-23 14:50:50.018] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:50:50.242] DML res1: 0 [2025-09-23 14:50:50.849] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:50:50.870] Read Success [2025-09-23 14:50:50.870] Verifying certificate... [2025-09-23 14:50:51.094] Verified OK [2025-09-23 14:50:51.110] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:50:52.868] Verified OK [2025-09-23 14:50:52.890] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:50:53.443] Verified OK [2025-09-23 14:50:53.443] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:50:55.858] fs.protected_hardlinks = 1 [2025-09-23 14:50:55.874] fs.protected_symlinks = 1 [2025-09-23 14:50:55.874] kernel.modules_disabled = 1 [2025-09-23 14:50:56.081] [2025-09-23 14:50:56.081] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:50:57.360] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:51:05.211] SBL1:1210.0.1.0 [2025-09-23 14:51:05.243] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:51:06.809] SBL2:1210.0.1.0 [2025-09-23 14:51:06.857] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:51:06.953] j-A [2025-09-23 14:51:14.307] The R5 Autosar Classic is running [2025-09-23 14:51:14.307] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:51:14.328] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:51:14.936] INIT: version 2.96 booting [2025-09-23 14:51:15.047] INIT: Entering runlevel: 5 [2025-09-23 14:51:15.191] mtd24 attached [2025-09-23 14:51:15.207] mtd32 attached [2025-09-23 14:51:15.223] mtd28 attached [2025-09-23 14:51:15.239] ubi0:textures is mounted. [2025-09-23 14:51:15.330] ubi1:dml_code is mounted. [2025-09-23 14:51:15.330] ubi2:animations is mounted. [2025-09-23 14:51:15.331] RTNETLINK answers: File exists [2025-09-23 14:51:15.331] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:51:15.331] data.LB_FadeInType0=100 [2025-09-23 14:51:15.331] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:51:15.331] data.CHLH_FadeInType0=0 [2025-09-23 14:51:15.331] data.WU_FadeInDelay=0 [2025-09-23 14:51:15.331] max_time_out=0 [2025-09-23 14:51:15.331] No splash screen [2025-09-23 14:51:15.331] stop dss Done [2025-09-23 14:51:15.331] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:51:15.331] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:51:15.331] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:51:15.394] /dev/mem opened. [2025-09-23 14:51:15.394] Memory mapped at address 0xffffa7bd6000. [2025-09-23 14:51:15.394] Read at address 0x00600018 (0xffffa7bd6018): 0x00000000 [2025-09-23 14:51:15.394] Write at address 0x00600018 (0xffffa7bd6018): 0x00400040, readback 0x00400040 [2025-09-23 14:51:15.442] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:51:15.442] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:51:15.601] Loaded PowerVR consumer services. [2025-09-23 14:51:15.633] 512+0 records in [2025-09-23 14:51:15.633] 512+0 records out [2025-09-23 14:51:15.649] Waiting data available... [2025-09-23 14:51:15.681] Starting syslogd/klogd: done [2025-09-23 14:51:15.697] DML Start [2025-09-23 14:51:15.873] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:51:16.097] DML res1: 0 [2025-09-23 14:51:16.561] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:51:16.582] Read Success [2025-09-23 14:51:16.582] Verifying certificate... [2025-09-23 14:51:16.805] Verified OK [2025-09-23 14:51:16.821] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:51:18.372] Verified OK [2025-09-23 14:51:18.372] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:51:18.944] Verified OK [2025-09-23 14:51:18.944] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:51:21.742] fs.protected_hardlinks = 1 [2025-09-23 14:51:21.758] fs.protected_symlinks = 1 [2025-09-23 14:51:21.758] kernel.modules_disabled = 1 [2025-09-23 14:51:21.950] [2025-09-23 14:51:21.950] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:51:23.255] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:51:31.029] SBL1:1210.0.1.0 [2025-09-23 14:51:31.077] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:51:32.644] SBL2:1210.0.1.0 [2025-09-23 14:51:32.676] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:51:32.788] j-A [2025-09-23 14:51:40.159] The R5 Autosar Classic is running [2025-09-23 14:51:40.159] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:51:40.159] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:51:40.767] INIT: version 2.96 booting [2025-09-23 14:51:40.878] INIT: Entering runlevel: 5 [2025-09-23 14:51:41.202] mtd32 attached [2025-09-23 14:51:41.202] mtd28 attached [2025-09-23 14:51:41.202] mtd24 attached [2025-09-23 14:51:41.202] RTNETLINK answers: File exists [2025-09-23 14:51:41.202] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:51:41.202] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:51:41.202] ubi2:textures is mounted. [2025-09-23 14:51:41.202] ubi0:dml_code is mounted. [2025-09-23 14:51:41.202] ubi1:animations is mounted. [2025-09-23 14:51:41.202] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:51:41.202] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:51:41.202] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:51:41.202] data.LB_FadeInType0=100 [2025-09-23 14:51:41.202] data.CHLH_FadeInType0=0 [2025-09-23 14:51:41.202] data.WU_FadeInDelay=0 [2025-09-23 14:51:41.202] max_time_out=0 [2025-09-23 14:51:41.202] No splash screen [2025-09-23 14:51:41.202] stop dss Done [2025-09-23 14:51:41.202] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:51:41.202] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:51:41.216] /dev/mem opened. [2025-09-23 14:51:41.216] Memory mapped at address 0xffffa7464000. [2025-09-23 14:51:41.242] Read at address 0x00600018 (0xffffa7464018): 0x00000000 [2025-09-23 14:51:41.242] Write at address 0x00600018 (0xffffa7464018): 0x00400040, readback 0x00400040 [2025-09-23 14:51:41.418] Loaded PowerVR consumer services. [2025-09-23 14:51:41.466] 512+0 records in [2025-09-23 14:51:41.466] 512+0 records out [2025-09-23 14:51:41.482] Waiting data available... [2025-09-23 14:51:41.514] Starting syslogd/klogd: done [2025-09-23 14:51:41.530] DML Start [2025-09-23 14:51:41.722] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:51:42.216] DML res1: 0 [2025-09-23 14:51:42.345] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:51:42.366] Read Success [2025-09-23 14:51:42.366] Verifying certificate... [2025-09-23 14:51:42.606] Verified OK [2025-09-23 14:51:42.622] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:51:44.269] Verified OK [2025-09-23 14:51:44.269] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:51:44.981] Verified OK [2025-09-23 14:51:44.981] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:51:47.699] fs.protected_hardlinks = 1 [2025-09-23 14:51:47.699] fs.protected_symlinks = 1 [2025-09-23 14:51:47.715] kernel.modules_disabled = 1 [2025-09-23 14:51:47.906] [2025-09-23 14:51:47.906] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:51:49.102] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:51:56.847] SBL1:1210.0.1.0 [2025-09-23 14:51:56.895] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:51:58.463] SBL2:1210.0.1.0 [2025-09-23 14:51:58.510] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:51:58.606] j-A [2025-09-23 14:52:05.961] The R5 Autosar Classic is running [2025-09-23 14:52:05.981] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:52:05.981] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:52:06.589] INIT: version 2.96 booting [2025-09-23 14:52:06.701] INIT: Entering runlevel: 5 [2025-09-23 14:52:06.861] mtd24 attached [2025-09-23 14:52:06.861] mtd32 attached [2025-09-23 14:52:06.877] mtd28 attached [2025-09-23 14:52:06.925] RTNETLINK answers: File exists [2025-09-23 14:52:06.925] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:52:06.984] ubi0:textures is mounted. [2025-09-23 14:52:06.984] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:52:06.984] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:52:06.984] ubi1:dml_code is mounted. [2025-09-23 14:52:06.984] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:52:06.984] ubi2:animations is mounted. [2025-09-23 14:52:06.984] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:52:06.985] data.LB_FadeInType0=100 [2025-09-23 14:52:07.012] data.CHLH_FadeInType0=0 [2025-09-23 14:52:07.012] data.WU_FadeInDelay=0 [2025-09-23 14:52:07.012] max_time_out=0 [2025-09-23 14:52:07.012] No splash screen [2025-09-23 14:52:07.012] stop dss Done [2025-09-23 14:52:07.012] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:52:07.012] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:52:07.062] /dev/mem opened. [2025-09-23 14:52:07.062] Memory mapped at address 0xffff7f86b000. [2025-09-23 14:52:07.062] Read at address 0x00600018 (0xffff7f86b018): 0x00000000 [2025-09-23 14:52:07.062] Write at address 0x00600018 (0xffff7f86b018): 0x00400040, readback 0x00400040 [2025-09-23 14:52:07.142] Loaded PowerVR consumer services. [2025-09-23 14:52:07.294] Waiting data available... [2025-09-23 14:52:07.294] 512+0 records in [2025-09-23 14:52:07.294] 512+0 records out [2025-09-23 14:52:07.327] Starting syslogd/klogd: done [2025-09-23 14:52:07.343] DML Start [2025-09-23 14:52:07.534] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:52:07.758] DML res1: 0 [2025-09-23 14:52:08.174] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:52:08.190] Read Success [2025-09-23 14:52:08.190] Verifying certificate... [2025-09-23 14:52:08.430] Verified OK [2025-09-23 14:52:08.446] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:52:10.019] Verified OK [2025-09-23 14:52:10.019] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:52:10.635] Verified OK [2025-09-23 14:52:10.635] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:52:13.304] fs.protected_hardlinks = 1 [2025-09-23 14:52:13.304] fs.protected_symlinks = 1 [2025-09-23 14:52:13.320] kernel.modules_disabled = 1 [2025-09-23 14:52:13.512] [2025-09-23 14:52:13.512] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:52:14.855] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:52:22.668] SBL1:1210.0.1.0 [2025-09-23 14:52:22.716] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:52:24.283] SBL2:1210.0.1.0 [2025-09-23 14:52:24.327] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:52:24.426] j-A [2025-09-23 14:52:31.802] The R5 Autosar Classic is running [2025-09-23 14:52:31.802] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:52:31.802] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:52:32.409] INIT: version 2.96 booting [2025-09-23 14:52:32.505] INIT: Entering runlevel: 5 [2025-09-23 14:52:32.855] mtd24 attached [2025-09-23 14:52:32.855] mtd32 attached [2025-09-23 14:52:32.855] mtd28 attached [2025-09-23 14:52:32.855] ubi0:textures is mounted. [2025-09-23 14:52:32.855] RTNETLINK answers: File exists [2025-09-23 14:52:32.855] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:52:32.855] ubi2:animations is mounted. [2025-09-23 14:52:32.855] ubi1:dml_code is mounted. [2025-09-23 14:52:32.855] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:52:32.855] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:52:32.855] data.LB_FadeInType0=100 [2025-09-23 14:52:32.855] data.CHLH_FadeInType0=0 [2025-09-23 14:52:32.855] data.WU_FadeInDelay=0 [2025-09-23 14:52:32.855] max_time_out=0 [2025-09-23 14:52:32.855] No splash screen [2025-09-23 14:52:32.855] stop dss Done [2025-09-23 14:52:32.855] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:52:32.855] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:52:32.855] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:52:32.855] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:52:32.880] /dev/mem opened. [2025-09-23 14:52:32.880] Memory mapped at address 0xffff98c14000. [2025-09-23 14:52:32.880] Read at address 0x00600018 (0xffff98c14018): 0x00000000 [2025-09-23 14:52:32.880] Write at address 0x00600018 (0xffff98c14018): 0x00400040, readback 0x00400040 [2025-09-23 14:52:33.056] Loaded PowerVR consumer services. [2025-09-23 14:52:33.104] 512+0 records in [2025-09-23 14:52:33.104] 512+0 records out [2025-09-23 14:52:33.136] Waiting data available... [2025-09-23 14:52:33.152] Starting syslogd/klogd: done [2025-09-23 14:52:33.184] DML Start [2025-09-23 14:52:33.344] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:52:33.584] DML res1: 0 [2025-09-23 14:52:34.031] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:52:34.053] Read Success [2025-09-23 14:52:34.053] Verifying certificate... [2025-09-23 14:52:34.276] Verified OK [2025-09-23 14:52:34.292] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:52:36.065] Verified OK [2025-09-23 14:52:36.065] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:52:36.607] Verified OK [2025-09-23 14:52:36.607] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:52:39.245] fs.protected_hardlinks = 1 [2025-09-23 14:52:39.245] fs.protected_symlinks = 1 [2025-09-23 14:52:39.261] kernel.modules_disabled = 1 [2025-09-23 14:52:39.469] [2025-09-23 14:52:39.469] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:52:40.689] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:52:48.503] SBL1:1210.0.1.0 [2025-09-23 14:52:48.551] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:52:50.119] SBL2:1210.0.1.0 [2025-09-23 14:52:50.150] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 14:52:50.262] j-A [2025-09-23 14:52:57.617] The R5 Autosar Classic is running [2025-09-23 14:52:57.617] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:52:57.638] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:52:58.245] INIT: version 2.96 booting [2025-09-23 14:52:58.653] INIT: Entering runlevel: 5 [2025-09-23 14:52:58.653] mtd28 attached [2025-09-23 14:52:58.653] mtd24 attached [2025-09-23 14:52:58.653] mtd32 attached [2025-09-23 14:52:58.653] ubi0:animations is mounted. [2025-09-23 14:52:58.653] RTNETLINK answers: File exists [2025-09-23 14:52:58.653] ubi1:textures is mounted. [2025-09-23 14:52:58.653] ubi2:dml_code is mounted. [2025-09-23 14:52:58.653] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:52:58.653] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:52:58.653] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:52:58.653] data.LB_FadeInType0=100 [2025-09-23 14:52:58.653] data.CHLH_FadeInType0=0 [2025-09-23 14:52:58.653] data.WU_FadeInDelay=0 [2025-09-23 14:52:58.653] max_time_out=0 [2025-09-23 14:52:58.653] No splash screen [2025-09-23 14:52:58.653] stop dss Done [2025-09-23 14:52:58.653] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:52:58.653] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:52:58.734] /dev/mem opened. [2025-09-23 14:52:58.734] Memory mapped at address 0xffff92a13000. [2025-09-23 14:52:58.734] Read at address 0x00600018 (0xffff92a13018): 0x00000000 [2025-09-23 14:52:58.734] Write at address 0x00600018 (0xffff92a13018): 0x00400040, readback 0x00400040 [2025-09-23 14:52:58.734] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:52:58.734] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:52:58.797] Loaded PowerVR consumer services. [2025-09-23 14:52:58.926] 512+0 records in [2025-09-23 14:52:58.926] 512+0 records out [2025-09-23 14:52:58.958] Waiting data available... [2025-09-23 14:52:58.989] Starting syslogd/klogd: done [2025-09-23 14:52:59.006] DML Start [2025-09-23 14:52:59.197] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:52:59.653] DML res1: 0 [2025-09-23 14:52:59.844] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:52:59.844] Read Success [2025-09-23 14:52:59.844] Verifying certificate... [2025-09-23 14:53:00.084] Verified OK [2025-09-23 14:53:00.100] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:53:01.730] Verified OK [2025-09-23 14:53:01.810] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:53:02.393] Verified OK [2025-09-23 14:53:02.393] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:53:05.063] fs.protected_hardlinks = 1 [2025-09-23 14:53:05.078] fs.protected_symlinks = 1 [2025-09-23 14:53:05.078] kernel.modules_disabled = 1 [2025-09-23 14:53:05.287] [2025-09-23 14:53:05.287] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:53:06.491] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:53:14.343] SBL1:1210.0.1.0 [2025-09-23 14:53:14.390] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:53:15.957] SBL2:1210.0.1.0 [2025-09-23 14:53:16.005] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:53:16.102] j-A [2025-09-23 14:53:23.457] The R5 Autosar Classic is running [2025-09-23 14:53:23.457] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:53:23.478] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:53:24.086] INIT: version 2.96 booting [2025-09-23 14:53:24.482] INIT: Entering runlevel: 5 [2025-09-23 14:53:24.482] mtd32 attached [2025-09-23 14:53:24.482] mtd28 attached [2025-09-23 14:53:24.482] mtd24 attached [2025-09-23 14:53:24.482] ubi0:dml_code is mounted. [2025-09-23 14:53:24.482] RTNETLINK answers: File exists [2025-09-23 14:53:24.482] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:53:24.482] ubi1:animations is mounted. [2025-09-23 14:53:24.482] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:53:24.482] ubi2:textures is mounted. [2025-09-23 14:53:24.482] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:53:24.482] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:53:24.482] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:53:24.482] data.LB_FadeInType0=100 [2025-09-23 14:53:24.482] data.CHLH_FadeInType0=0 [2025-09-23 14:53:24.482] data.WU_FadeInDelay=0 [2025-09-23 14:53:24.482] max_time_out=0 [2025-09-23 14:53:24.482] No splash screen [2025-09-23 14:53:24.482] stop dss Done [2025-09-23 14:53:24.525] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:53:24.525] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:53:24.560] /dev/mem opened. [2025-09-23 14:53:24.560] Memory mapped at address 0xffff82ad5000. [2025-09-23 14:53:24.560] Read at address 0x00600018 (0xffff82ad5018): 0x00000000 [2025-09-23 14:53:24.560] Write at address 0x00600018 (0xffff82ad5018): 0x00400040, readback 0x00400040 [2025-09-23 14:53:24.735] Loaded PowerVR consumer services. [2025-09-23 14:53:24.783] 512+0 records in [2025-09-23 14:53:24.783] 512+0 records out [2025-09-23 14:53:24.815] Starting syslogd/klogd: done [2025-09-23 14:53:24.847] Waiting data available... [2025-09-23 14:53:24.847] DML Start [2025-09-23 14:53:25.039] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:53:25.503] DML res1: 0 [2025-09-23 14:53:25.687] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:53:25.687] Read Success [2025-09-23 14:53:25.687] Verifying certificate... [2025-09-23 14:53:25.943] Verified OK [2025-09-23 14:53:25.958] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:53:27.558] Verified OK [2025-09-23 14:53:27.558] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:53:28.131] Verified OK [2025-09-23 14:53:28.131] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:53:30.769] fs.protected_hardlinks = 1 [2025-09-23 14:53:30.785] fs.protected_symlinks = 1 [2025-09-23 14:53:30.785] kernel.modules_disabled = 1 [2025-09-23 14:53:30.976] [2025-09-23 14:53:30.976] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:53:32.341] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:53:40.137] SBL1:1210.0.1.0 [2025-09-23 14:53:40.169] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:53:41.752] SBL2:1210.0.1.0 [2025-09-23 14:53:41.784] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:53:41.896] j-A [2025-09-23 14:53:49.235] The R5 Autosar Classic is running [2025-09-23 14:53:49.266] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:53:49.266] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:53:49.874] INIT: version 2.96 booting [2025-09-23 14:53:49.986] INIT: Entering runlevel: 5 [2025-09-23 14:53:50.264] mtd32 attached [2025-09-23 14:53:50.264] mtd28 attached [2025-09-23 14:53:50.264] mtd24 attached [2025-09-23 14:53:50.264] RTNETLINK answers: File exists [2025-09-23 14:53:50.264] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:53:50.264] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:53:50.264] ubi1:animations is mounted. [2025-09-23 14:53:50.264] ubi0:dml_code is mounted. [2025-09-23 14:53:50.264] ubi2:textures is mounted. [2025-09-23 14:53:50.264] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:53:50.264] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:53:50.264] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:53:50.271] data.LB_FadeInType0=100 [2025-09-23 14:53:50.271] data.CHLH_FadeInType0=0 [2025-09-23 14:53:50.271] data.WU_FadeInDelay=0 [2025-09-23 14:53:50.271] max_time_out=0 [2025-09-23 14:53:50.271] No splash screen [2025-09-23 14:53:50.271] stop dss Done [2025-09-23 14:53:50.287] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:53:50.303] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:53:50.319] /dev/mem opened. [2025-09-23 14:53:50.319] Memory mapped at address 0xffff8a113000. [2025-09-23 14:53:50.345] Read at address 0x00600018 (0xffff8a113018): 0x00000000 [2025-09-23 14:53:50.345] Write at address 0x00600018 (0xffff8a113018): 0x00400040, readback 0x00400040 [2025-09-23 14:53:50.458] Loaded PowerVR consumer services. [2025-09-23 14:53:50.554] 512+0 records in [2025-09-23 14:53:50.554] 512+0 records out [2025-09-23 14:53:50.569] Starting syslogd/klogd: done [2025-09-23 14:53:50.601] Waiting data available... [2025-09-23 14:53:50.601] DML Start [2025-09-23 14:53:50.777] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:53:51.018] DML res1: 0 [2025-09-23 14:53:51.493] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:53:51.493] Read Success [2025-09-23 14:53:51.493] Verifying certificate... [2025-09-23 14:53:51.810] Verified OK [2025-09-23 14:53:51.810] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:53:53.586] Verified OK [2025-09-23 14:53:53.586] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:53:54.114] Verified OK [2025-09-23 14:53:54.114] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:53:56.657] fs.protected_hardlinks = 1 [2025-09-23 14:53:56.668] fs.protected_symlinks = 1 [2025-09-23 14:53:56.668] kernel.modules_disabled = 1 [2025-09-23 14:53:56.843] [2025-09-23 14:53:56.843] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:53:58.094] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:54:05.948] SBL1:1210.0.1.0 [2025-09-23 14:54:05.996] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:54:07.579] SBL2:1210.0.1.0 [2025-09-23 14:54:07.611] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:54:07.706] j-A [2025-09-23 14:54:15.062] The R5 Autosar Classic is running [2025-09-23 14:54:15.085] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:54:15.085] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:54:15.693] INIT: version 2.96 booting [2025-09-23 14:54:15.804] INIT: Entering runlevel: 5 [2025-09-23 14:54:15.965] mtd32 attached [2025-09-23 14:54:15.965] mtd28 attached [2025-09-23 14:54:15.980] mtd24 attached [2025-09-23 14:54:16.028] RTNETLINK answers: File exists [2025-09-23 14:54:16.028] ubi0:dml_code is mounted. [2025-09-23 14:54:16.134] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:54:16.134] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:54:16.134] ubi2:textures is mounted. [2025-09-23 14:54:16.134] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:54:16.134] ubi1:animations is mounted. [2025-09-23 14:54:16.134] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:54:16.134] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:54:16.135] data.LB_FadeInType0=100 [2025-09-23 14:54:16.135] data.CHLH_FadeInType0=0 [2025-09-23 14:54:16.135] data.WU_FadeInDelay=0 [2025-09-23 14:54:16.135] max_time_out=0 [2025-09-23 14:54:16.135] No splash screen [2025-09-23 14:54:16.135] stop dss Done [2025-09-23 14:54:16.135] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:54:16.135] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:54:16.157] /dev/mem opened. [2025-09-23 14:54:16.157] Memory mapped at address 0xffff8494b000. [2025-09-23 14:54:16.157] Read at address 0x00600018 (0xffff8494b018): 0x00000000 [2025-09-23 14:54:16.157] Write at address 0x00600018 (0xffff8494b018): 0x00400040, readback 0x00400040 [2025-09-23 14:54:16.253] Loaded PowerVR consumer services. [2025-09-23 14:54:16.403] 512+0 records in [2025-09-23 14:54:16.403] 512+0 records out [2025-09-23 14:54:16.403] Waiting data available... [2025-09-23 14:54:16.419] Starting syslogd/klogd: done [2025-09-23 14:54:16.435] DML Start [2025-09-23 14:54:16.627] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:54:17.138] DML res1: 0 [2025-09-23 14:54:17.250] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:54:17.266] Read Success [2025-09-23 14:54:17.266] Verifying certificate... [2025-09-23 14:54:17.522] Verified OK [2025-09-23 14:54:17.538] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:54:19.226] Verified OK [2025-09-23 14:54:19.226] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:54:19.850] Verified OK [2025-09-23 14:54:19.850] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:54:22.471] fs.protected_hardlinks = 1 [2025-09-23 14:54:22.487] fs.protected_symlinks = 1 [2025-09-23 14:54:22.487] kernel.modules_disabled = 1 [2025-09-23 14:54:22.679] [2025-09-23 14:54:22.679] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:54:23.986] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:54:31.768] SBL1:1210.0.1.0 [2025-09-23 14:54:31.800] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:54:33.383] SBL2:1210.0.1.0 [2025-09-23 14:54:33.415] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:54:33.511] j-A [2025-09-23 14:54:40.884] The R5 Autosar Classic is running [2025-09-23 14:54:40.888] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:54:40.888] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:54:41.496] INIT: version 2.96 booting [2025-09-23 14:54:41.608] INIT: Entering runlevel: 5 [2025-09-23 14:54:41.752] mtd24 attached [2025-09-23 14:54:41.892] mtd28 attached [2025-09-23 14:54:41.893] mtd32 attached [2025-09-23 14:54:41.893] ubi0:textures is mounted. [2025-09-23 14:54:41.893] RTNETLINK answers: File exists [2025-09-23 14:54:41.893] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:54:41.893] ubi2:dml_code is mounted. [2025-09-23 14:54:41.893] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:54:41.893] ubi1:animations is mounted. [2025-09-23 14:54:41.893] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:54:41.893] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:54:41.893] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:54:41.893] data.LB_FadeInType0=100 [2025-09-23 14:54:41.893] data.CHLH_FadeInType0=0 [2025-09-23 14:54:41.893] data.WU_FadeInDelay=0 [2025-09-23 14:54:41.893] max_time_out=0 [2025-09-23 14:54:41.893] No splash screen [2025-09-23 14:54:41.893] stop dss Done [2025-09-23 14:54:41.933] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:54:41.976] /dev/mem opened. [2025-09-23 14:54:41.976] Memory mapped at address 0xffff941b0000. [2025-09-23 14:54:41.976] Read at address 0x00600018 (0xffff941b0018): 0x00000000 [2025-09-23 14:54:41.976] Write at address 0x00600018 (0xffff941b0018): 0x00400040, readback 0x00400040 [2025-09-23 14:54:41.976] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:54:42.072] Loaded PowerVR consumer services. [2025-09-23 14:54:42.184] 512+0 records in [2025-09-23 14:54:42.184] 512+0 records out [2025-09-23 14:54:42.216] Waiting data available... [2025-09-23 14:54:42.232] Starting syslogd/klogd: done [2025-09-23 14:54:42.248] DML Start [2025-09-23 14:54:42.440] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:54:42.664] DML res1: 0 [2025-09-23 14:54:43.166] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:54:43.166] Read Success [2025-09-23 14:54:43.166] Verifying certificate... [2025-09-23 14:54:43.438] Verified OK [2025-09-23 14:54:43.454] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:54:45.351] Verified OK [2025-09-23 14:54:45.351] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:54:45.796] Verified OK [2025-09-23 14:54:45.796] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:54:48.274] fs.protected_hardlinks = 1 [2025-09-23 14:54:48.274] fs.protected_symlinks = 1 [2025-09-23 14:54:48.297] kernel.modules_disabled = 1 [2025-09-23 14:54:48.481] [2025-09-23 14:54:48.481] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:54:49.739] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:54:57.599] SBL1:1210.0.1.0 [2025-09-23 14:54:57.630] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:54:59.213] SBL2:1210.0.1.0 [2025-09-23 14:54:59.245] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:54:59.356] j-A [2025-09-23 14:55:06.727] The R5 Autosar Classic is running [2025-09-23 14:55:06.727] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:55:06.727] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:55:07.334] INIT: version 2.96 booting [2025-09-23 14:55:07.780] INIT: Entering runlevel: 5 [2025-09-23 14:55:07.781] mtd24 attached [2025-09-23 14:55:07.781] mtd28 attached [2025-09-23 14:55:07.781] mtd32 attached [2025-09-23 14:55:07.781] ubi1:animations is mounted. [2025-09-23 14:55:07.781] ubi0:textures is mounted. [2025-09-23 14:55:07.781] RTNETLINK answers: File exists [2025-09-23 14:55:07.781] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:55:07.781] ubi2:dml_code is mounted. [2025-09-23 14:55:07.781] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:55:07.781] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:55:07.781] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:55:07.781] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:55:07.781] data.LB_FadeInType0=100 [2025-09-23 14:55:07.781] data.CHLH_FadeInType0=0 [2025-09-23 14:55:07.781] data.WU_FadeInDelay=0 [2025-09-23 14:55:07.781] max_time_out=0 [2025-09-23 14:55:07.781] No splash screen [2025-09-23 14:55:07.781] stop dss Done [2025-09-23 14:55:07.788] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:55:07.788] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:55:07.788] /dev/mem opened. [2025-09-23 14:55:07.788] Memory mapped at address 0xffffa64e7000. [2025-09-23 14:55:07.788] Read at address 0x00600018 (0xffffa64e7018): 0x00000000 [2025-09-23 14:55:07.788] Write at address 0x00600018 (0xffffa64e7018): 0x00400040, readback 0x00400040 [2025-09-23 14:55:07.899] Loaded PowerVR consumer services. [2025-09-23 14:55:08.028] Waiting data available... [2025-09-23 14:55:08.044] 512+0 records in [2025-09-23 14:55:08.044] 512+0 records out [2025-09-23 14:55:08.092] Starting syslogd/klogd: done [2025-09-23 14:55:08.108] DML Start [2025-09-23 14:55:08.283] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:55:08.779] DML res1: 0 [2025-09-23 14:55:08.972] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:55:08.972] Read Success [2025-09-23 14:55:08.987] Verifying certificate... [2025-09-23 14:55:09.227] Verified OK [2025-09-23 14:55:09.243] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:55:11.012] Verified OK [2025-09-23 14:55:11.012] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:55:11.513] Verified OK [2025-09-23 14:55:11.513] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:55:13.927] fs.protected_hardlinks = 1 [2025-09-23 14:55:13.956] fs.protected_symlinks = 1 [2025-09-23 14:55:13.956] kernel.modules_disabled = 1 [2025-09-23 14:55:14.133] [2025-09-23 14:55:14.133] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:55:15.568] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:55:23.433] SBL1:1210.0.1.0 [2025-09-23 14:55:23.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:55:25.048] SBL2:1210.0.1.0 [2025-09-23 14:55:25.080] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:55:25.192] j-A [2025-09-23 14:55:32.563] The R5 Autosar Classic is running [2025-09-23 14:55:32.563] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:55:32.563] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:55:33.172] INIT: version 2.96 booting [2025-09-23 14:55:33.283] INIT: Entering runlevel: 5 [2025-09-23 14:55:33.623] mtd24 attached [2025-09-23 14:55:33.623] mtd28 attached [2025-09-23 14:55:33.623] mtd32 attached [2025-09-23 14:55:33.623] RTNETLINK answers: File exists [2025-09-23 14:55:33.623] ubi0:textures is mounted. [2025-09-23 14:55:33.623] ubi1:animations is mounted. [2025-09-23 14:55:33.623] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:55:33.623] ubi2:dml_code is mounted. [2025-09-23 14:55:33.623] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:55:33.623] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:55:33.623] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:55:33.623] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:55:33.623] data.LB_FadeInType0=100 [2025-09-23 14:55:33.623] data.CHLH_FadeInType0=0 [2025-09-23 14:55:33.623] data.WU_FadeInDelay=0 [2025-09-23 14:55:33.623] max_time_out=0 [2025-09-23 14:55:33.623] No splash screen [2025-09-23 14:55:33.623] stop dss Done [2025-09-23 14:55:33.623] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:55:33.623] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:55:33.650] /dev/mem opened. [2025-09-23 14:55:33.650] Memory mapped at address 0xffff83da2000. [2025-09-23 14:55:33.650] Read at address 0x00600018 (0xffff83da2018): 0x00000000 [2025-09-23 14:55:33.650] Write at address 0x00600018 (0xffff83da2018): 0x00400040, readback 0x00400040 [2025-09-23 14:55:33.746] Loaded PowerVR consumer services. [2025-09-23 14:55:33.858] 512+0 records in [2025-09-23 14:55:33.858] 512+0 records out [2025-09-23 14:55:33.890] Waiting data available... [2025-09-23 14:55:33.905] Starting syslogd/klogd: done [2025-09-23 14:55:33.922] DML Start [2025-09-23 14:55:34.114] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:55:34.353] DML res1: 0 [2025-09-23 14:55:34.778] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:55:34.778] Read Success [2025-09-23 14:55:34.778] Verifying certificate... [2025-09-23 14:55:35.018] Verified OK [2025-09-23 14:55:35.034] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:55:36.697] Verified OK [2025-09-23 14:55:36.697] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:55:37.381] Verified OK [2025-09-23 14:55:37.381] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:55:39.988] fs.protected_hardlinks = 1 [2025-09-23 14:55:40.003] fs.protected_symlinks = 1 [2025-09-23 14:55:40.019] kernel.modules_disabled = 1 [2025-09-23 14:55:40.212] [2025-09-23 14:55:40.212] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:55:41.456] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:55:49.258] SBL1:1210.0.1.0 [2025-09-23 14:55:49.306] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:55:50.873] SBL2:1210.0.1.0 [2025-09-23 14:55:50.921] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:55:51.018] j-A [2025-09-23 14:55:58.389] The R5 Autosar Classic is running [2025-09-23 14:55:58.389] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:55:58.389] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:55:58.997] INIT: version 2.96 booting [2025-09-23 14:55:59.108] INIT: Entering runlevel: 5 [2025-09-23 14:55:59.437] mtd28 attached [2025-09-23 14:55:59.437] mtd24 attached [2025-09-23 14:55:59.437] ubi0:animations is mounted. [2025-09-23 14:55:59.437] ubi1:textures is mounted. [2025-09-23 14:55:59.437] mtd32 attached [2025-09-23 14:55:59.437] RTNETLINK answers: File exists [2025-09-23 14:55:59.437] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:55:59.437] ubi2:dml_code is mounted. [2025-09-23 14:55:59.437] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:55:59.437] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:55:59.437] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:55:59.437] data.LB_FadeInType0=100 [2025-09-23 14:55:59.437] data.CHLH_FadeInType0=0 [2025-09-23 14:55:59.437] data.WU_FadeInDelay=0 [2025-09-23 14:55:59.437] max_time_out=0 [2025-09-23 14:55:59.437] No splash screen [2025-09-23 14:55:59.437] stop dss Done [2025-09-23 14:55:59.437] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:55:59.441] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:55:59.441] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:55:59.480] /dev/mem opened. [2025-09-23 14:55:59.480] Memory mapped at address 0xffff80684000. [2025-09-23 14:55:59.480] Read at address 0x00600018 (0xffff80684018): 0x00000000 [2025-09-23 14:55:59.480] Write at address 0x00600018 (0xffff80684018): 0x00400040, readback 0x00400040 [2025-09-23 14:55:59.672] Loaded PowerVR consumer services. [2025-09-23 14:55:59.704] Waiting data available... [2025-09-23 14:55:59.720] 512+0 records in [2025-09-23 14:55:59.720] 512+0 records out [2025-09-23 14:55:59.736] Starting syslogd/klogd: done [2025-09-23 14:55:59.752] DML Start [2025-09-23 14:55:59.927] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:56:00.152] DML res1: 0 [2025-09-23 14:56:00.656] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:56:00.656] Read Success [2025-09-23 14:56:00.656] Verifying certificate... [2025-09-23 14:56:00.912] Verified OK [2025-09-23 14:56:00.928] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:56:02.638] Verified OK [2025-09-23 14:56:02.672] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:56:03.191] Verified OK [2025-09-23 14:56:03.191] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:56:05.653] fs.protected_hardlinks = 1 [2025-09-23 14:56:05.669] fs.protected_symlinks = 1 [2025-09-23 14:56:05.669] kernel.modules_disabled = 1 [2025-09-23 14:56:05.878] [2025-09-23 14:56:05.878] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:56:07.284] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:56:15.079] SBL1:1210.0.1.0 [2025-09-23 14:56:15.127] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:56:16.694] SBL2:1210.0.1.0 [2025-09-23 14:56:16.725] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:56:16.837] j-A [2025-09-23 14:56:24.211] The R5 Autosar Classic is running [2025-09-23 14:56:24.211] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:56:24.211] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:56:24.818] INIT: version 2.96 booting [2025-09-23 14:56:24.931] INIT: Entering runlevel: 5 [2025-09-23 14:56:25.075] mtd28 attached [2025-09-23 14:56:25.091] mtd24 attached [2025-09-23 14:56:25.107] mtd32 attached [2025-09-23 14:56:25.138] ubi0:animations is mounted. [2025-09-23 14:56:25.138] ubi1:textures is mounted. [2025-09-23 14:56:25.154] RTNETLINK answers: File exists [2025-09-23 14:56:25.210] ubi2:dml_code is mounted. [2025-09-23 14:56:25.210] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:56:25.210] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:56:25.210] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:56:25.210] data.LB_FadeInType0=100 [2025-09-23 14:56:25.210] data.CHLH_FadeInType0=0 [2025-09-23 14:56:25.210] data.WU_FadeInDelay=0 [2025-09-23 14:56:25.210] max_time_out=0 [2025-09-23 14:56:25.210] No splash screen [2025-09-23 14:56:25.210] stop dss Done [2025-09-23 14:56:25.210] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:56:25.210] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:56:25.267] /dev/mem opened. [2025-09-23 14:56:25.267] Memory mapped at address 0xffff91dbc000. [2025-09-23 14:56:25.267] Read at address 0x00600018 (0xffff91dbc018): 0x00000000 [2025-09-23 14:56:25.267] Write at address 0x00600018 (0xffff91dbc018): 0x00400040, readback 0x00400040 [2025-09-23 14:56:25.315] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:56:25.332] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:56:25.492] Loaded PowerVR consumer services. [2025-09-23 14:56:25.523] 512+0 records in [2025-09-23 14:56:25.539] 512+0 records out [2025-09-23 14:56:25.555] Waiting data available... [2025-09-23 14:56:25.587] Starting syslogd/klogd: done [2025-09-23 14:56:25.603] DML Start [2025-09-23 14:56:25.795] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:56:26.019] DML res1: 0 [2025-09-23 14:56:26.446] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:56:26.446] Read Success [2025-09-23 14:56:26.446] Verifying certificate... [2025-09-23 14:56:26.718] Verified OK [2025-09-23 14:56:26.734] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:56:28.459] Verified OK [2025-09-23 14:56:28.459] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:56:29.089] Verified OK [2025-09-23 14:56:29.089] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:56:31.663] fs.protected_hardlinks = 1 [2025-09-23 14:56:31.679] fs.protected_symlinks = 1 [2025-09-23 14:56:31.679] kernel.modules_disabled = 1 [2025-09-23 14:56:31.886] [2025-09-23 14:56:31.886] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:56:33.093] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:56:40.876] SBL1:1210.0.1.0 [2025-09-23 14:56:40.924] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:56:42.491] SBL2:1210.0.1.0 [2025-09-23 14:56:42.523] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:56:42.635] j-A [2025-09-23 14:56:50.009] The R5 Autosar Classic is running [2025-09-23 14:56:50.009] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:56:50.009] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:56:50.617] INIT: version 2.96 booting [2025-09-23 14:56:50.729] INIT: Entering runlevel: 5 [2025-09-23 14:56:51.047] mtd24 attached [2025-09-23 14:56:51.047] mtd32 attached [2025-09-23 14:56:51.047] mtd28 attached [2025-09-23 14:56:51.047] ubi0:textures is mounted. [2025-09-23 14:56:51.047] RTNETLINK answers: File exists [2025-09-23 14:56:51.047] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:56:51.047] ubi1:dml_code is mounted. [2025-09-23 14:56:51.047] ubi2:animations is mounted. [2025-09-23 14:56:51.047] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:56:51.047] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:56:51.047] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:56:51.047] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:56:51.047] data.LB_FadeInType0=100 [2025-09-23 14:56:51.047] data.CHLH_FadeInType0=0 [2025-09-23 14:56:51.047] data.WU_FadeInDelay=0 [2025-09-23 14:56:51.047] max_time_out=0 [2025-09-23 14:56:51.047] No splash screen [2025-09-23 14:56:51.047] stop dss Done [2025-09-23 14:56:51.054] /dev/mem opened. [2025-09-23 14:56:51.054] Memory mapped at address 0xffff897f7000. [2025-09-23 14:56:51.080] Read at address 0x00600018 (0xffff897f7018): 0x00000000 [2025-09-23 14:56:51.080] Write at address 0x00600018 (0xffff897f7018): 0x00400040, readback 0x00400040 [2025-09-23 14:56:51.096] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:56:51.112] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:56:51.224] Loaded PowerVR consumer services. [2025-09-23 14:56:51.320] Waiting data available... [2025-09-23 14:56:51.336] 512+0 records in [2025-09-23 14:56:51.336] 512+0 records out [2025-09-23 14:56:51.384] Starting syslogd/klogd: done [2025-09-23 14:56:51.400] DML Start [2025-09-23 14:56:51.559] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:56:51.816] DML res1: 0 [2025-09-23 14:56:52.293] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:56:52.293] Read Success [2025-09-23 14:56:52.293] Verifying certificate... [2025-09-23 14:56:52.629] Verified OK [2025-09-23 14:56:52.645] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:56:54.339] Verified OK [2025-09-23 14:56:54.355] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:56:54.898] Verified OK [2025-09-23 14:56:54.898] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:56:57.362] fs.protected_hardlinks = 1 [2025-09-23 14:56:57.363] fs.protected_symlinks = 1 [2025-09-23 14:56:57.363] kernel.modules_disabled = 1 [2025-09-23 14:56:57.553] [2025-09-23 14:56:57.553] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:56:58.896] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:57:06.667] SBL1:1210.0.1.0 [2025-09-23 14:57:06.715] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:57:08.282] SBL2:1210.0.1.0 [2025-09-23 14:57:08.329] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:57:08.426] j-A [2025-09-23 14:57:15.800] The R5 Autosar Classic is running [2025-09-23 14:57:15.800] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:57:15.800] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:57:16.407] INIT: version 2.96 booting [2025-09-23 14:57:16.519] INIT: Entering runlevel: 5 [2025-09-23 14:57:16.844] mtd28 attached [2025-09-23 14:57:16.844] mtd24 attached [2025-09-23 14:57:16.844] mtd32 attached [2025-09-23 14:57:16.844] ubi0:animations is mounted. [2025-09-23 14:57:16.844] ubi1:textures is mounted. [2025-09-23 14:57:16.844] RTNETLINK answers: File exists [2025-09-23 14:57:16.844] ubi2:dml_code is mounted. [2025-09-23 14:57:16.844] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:57:16.844] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:57:16.844] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:57:16.844] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:57:16.844] data.LB_FadeInType0=100 [2025-09-23 14:57:16.844] data.CHLH_FadeInType0=0 [2025-09-23 14:57:16.844] data.WU_FadeInDelay=0 [2025-09-23 14:57:16.844] max_time_out=0 [2025-09-23 14:57:16.844] No splash screen [2025-09-23 14:57:16.844] stop dss Done [2025-09-23 14:57:16.844] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:57:16.844] /dev/mem opened. [2025-09-23 14:57:16.844] Memory mapped at address 0xffffa3657000. [2025-09-23 14:57:16.861] Read at address 0x00600018 (0xffffa3657018): 0x00000000 [2025-09-23 14:57:16.861] Write at address 0x00600018 (0xffffa3657018): 0x00400040, readback 0x00400040 [2025-09-23 14:57:16.909] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:57:16.925] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:57:17.085] Loaded PowerVR consumer services. [2025-09-23 14:57:17.131] 512+0 records in [2025-09-23 14:57:17.131] 512+0 records out [2025-09-23 14:57:17.131] Waiting data available... [2025-09-23 14:57:17.147] Starting syslogd/klogd: done [2025-09-23 14:57:17.163] DML Start [2025-09-23 14:57:17.355] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:57:17.842] DML res1: 0 [2025-09-23 14:57:17.995] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:57:18.011] Read Success [2025-09-23 14:57:18.011] Verifying certificate... [2025-09-23 14:57:18.282] Verified OK [2025-09-23 14:57:18.282] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:57:19.944] Verified OK [2025-09-23 14:57:19.944] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:57:20.565] Verified OK [2025-09-23 14:57:20.565] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:57:23.234] fs.protected_hardlinks = 1 [2025-09-23 14:57:23.234] fs.protected_symlinks = 1 [2025-09-23 14:57:23.250] kernel.modules_disabled = 1 [2025-09-23 14:57:23.443] [2025-09-23 14:57:23.443] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:57:24.645] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:57:32.507] SBL1:1210.0.1.0 [2025-09-23 14:57:32.539] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:57:34.122] SBL2:1210.0.1.0 [2025-09-23 14:57:34.174] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:57:34.266] j-A [2025-09-23 14:57:41.603] The R5 Autosar Classic is running [2025-09-23 14:57:41.628] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:57:41.628] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:57:42.236] INIT: version 2.96 booting [2025-09-23 14:57:42.347] INIT: Entering runlevel: 5 [2025-09-23 14:57:42.639] mtd24 attached [2025-09-23 14:57:42.639] mtd28 attached [2025-09-23 14:57:42.639] mtd32 attached [2025-09-23 14:57:42.639] ubi0:textures is mounted. [2025-09-23 14:57:42.639] RTNETLINK answers: File exists [2025-09-23 14:57:42.639] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:57:42.639] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:57:42.639] ubi1:animations is mounted. [2025-09-23 14:57:42.639] ubi2:dml_code is mounted. [2025-09-23 14:57:42.639] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:57:42.639] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:57:42.639] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:57:42.639] data.LB_FadeInType0=100 [2025-09-23 14:57:42.639] data.CHLH_FadeInType0=0 [2025-09-23 14:57:42.640] data.WU_FadeInDelay=0 [2025-09-23 14:57:42.640] max_time_out=0 [2025-09-23 14:57:42.640] No splash screen [2025-09-23 14:57:42.640] stop dss Done [2025-09-23 14:57:42.699] /dev/mem opened. [2025-09-23 14:57:42.699] Memory mapped at address 0xffff8ef08000. [2025-09-23 14:57:42.699] Read at address 0x00600018 (0xffff8ef08018): 0x00000000 [2025-09-23 14:57:42.699] Write at address 0x00600018 (0xffff8ef08018): 0x00400040, readback 0x00400040 [2025-09-23 14:57:42.699] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:57:42.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:57:42.858] Loaded PowerVR consumer services. [2025-09-23 14:57:42.969] Waiting data available... [2025-09-23 14:57:42.969] 512+0 records in [2025-09-23 14:57:42.969] 512+0 records out [2025-09-23 14:57:43.001] Starting syslogd/klogd: done [2025-09-23 14:57:43.033] DML Start [2025-09-23 14:57:43.226] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:57:43.449] DML res1: 0 [2025-09-23 14:57:43.863] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:57:43.863] Read Success [2025-09-23 14:57:43.863] Verifying certificate... [2025-09-23 14:57:44.119] Verified OK [2025-09-23 14:57:44.135] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:57:45.804] Verified OK [2025-09-23 14:57:45.804] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:57:46.520] Verified OK [2025-09-23 14:57:46.520] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:57:49.143] fs.protected_hardlinks = 1 [2025-09-23 14:57:49.159] fs.protected_symlinks = 1 [2025-09-23 14:57:49.159] kernel.modules_disabled = 1 [2025-09-23 14:57:49.350] [2025-09-23 14:57:49.350] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:57:50.515] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:57:58.322] SBL1:1210.0.1.0 [2025-09-23 14:57:58.354] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:57:59.937] SBL2:1210.0.1.0 [2025-09-23 14:57:59.984] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:58:00.081] j-A [2025-09-23 14:58:07.452] The R5 Autosar Classic is running [2025-09-23 14:58:07.452] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:58:07.452] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:58:08.059] INIT: version 2.96 booting [2025-09-23 14:58:08.171] INIT: Entering runlevel: 5 [2025-09-23 14:58:08.500] mtd24 attached [2025-09-23 14:58:08.500] mtd28 attached [2025-09-23 14:58:08.500] mtd32 attached [2025-09-23 14:58:08.500] ubi0:textures is mounted. [2025-09-23 14:58:08.500] ubi1:animations is mounted. [2025-09-23 14:58:08.500] RTNETLINK answers: File exists [2025-09-23 14:58:08.500] ubi2:dml_code is mounted. [2025-09-23 14:58:08.500] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:58:08.500] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:58:08.500] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:58:08.500] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:58:08.500] data.LB_FadeInType0=100 [2025-09-23 14:58:08.500] data.CHLH_FadeInType0=0 [2025-09-23 14:58:08.500] data.WU_FadeInDelay=0 [2025-09-23 14:58:08.500] max_time_out=0 [2025-09-23 14:58:08.500] No splash screen [2025-09-23 14:58:08.500] stop dss Done [2025-09-23 14:58:08.500] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:58:08.500] /dev/mem opened. [2025-09-23 14:58:08.530] Memory mapped at address 0xffffa7b59000. [2025-09-23 14:58:08.530] Read at address 0x00600018 (0xffffa7b59018): 0x00000000 [2025-09-23 14:58:08.530] Write at address 0x00600018 (0xffffa7b59018): 0x00400040, readback 0x00400040 [2025-09-23 14:58:08.562] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:58:08.578] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:58:08.737] Loaded PowerVR consumer services. [2025-09-23 14:58:08.769] 512+0 records in [2025-09-23 14:58:08.769] 512+0 records out [2025-09-23 14:58:08.801] Waiting data available... [2025-09-23 14:58:08.817] Starting syslogd/klogd: done [2025-09-23 14:58:08.833] DML Start [2025-09-23 14:58:09.010] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:58:09.234] DML res1: 0 [2025-09-23 14:58:09.697] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:58:10.029] Read Success [2025-09-23 14:58:10.029] Verifying certificate... [2025-09-23 14:58:10.030] Verified OK [2025-09-23 14:58:10.030] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:58:11.588] Verified OK [2025-09-23 14:58:11.604] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:58:12.228] Verified OK [2025-09-23 14:58:12.228] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:58:14.834] fs.protected_hardlinks = 1 [2025-09-23 14:58:14.834] fs.protected_symlinks = 1 [2025-09-23 14:58:14.849] kernel.modules_disabled = 1 [2025-09-23 14:58:15.040] [2025-09-23 14:58:15.040] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:58:16.363] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:58:24.111] SBL1:1210.0.1.0 [2025-09-23 14:58:24.159] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:58:25.725] SBL2:1210.0.1.0 [2025-09-23 14:58:25.765] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 14:58:25.869] j-A [2025-09-23 14:58:33.224] The R5 Autosar Classic is running [2025-09-23 14:58:33.224] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:58:33.245] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:58:33.852] INIT: version 2.96 booting [2025-09-23 14:58:33.964] INIT: Entering runlevel: 5 [2025-09-23 14:58:34.108] mtd24 attached [2025-09-23 14:58:34.124] mtd32 attached [2025-09-23 14:58:34.140] mtd28 attached [2025-09-23 14:58:34.188] ubi0:textures is mounted. [2025-09-23 14:58:34.188] RTNETLINK answers: File exists [2025-09-23 14:58:34.295] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:58:34.295] ubi1:dml_code is mounted. [2025-09-23 14:58:34.295] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:58:34.295] ubi2:animations is mounted. [2025-09-23 14:58:34.295] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:58:34.295] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:58:34.295] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:58:34.295] data.LB_FadeInType0=100 [2025-09-23 14:58:34.295] data.CHLH_FadeInType0=0 [2025-09-23 14:58:34.295] data.WU_FadeInDelay=0 [2025-09-23 14:58:34.295] max_time_out=0 [2025-09-23 14:58:34.295] No splash screen [2025-09-23 14:58:34.295] stop dss Done [2025-09-23 14:58:34.296] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:58:34.316] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:58:34.316] /dev/mem opened. [2025-09-23 14:58:34.316] Memory mapped at address 0xffffad537000. [2025-09-23 14:58:34.316] Read at address 0x00600018 (0xffffad537018): 0x00000000 [2025-09-23 14:58:34.316] Write at address 0x00600018 (0xffffad537018): 0x00400040, readback 0x00400040 [2025-09-23 14:58:34.508] Loaded PowerVR consumer services. [2025-09-23 14:58:34.540] 512+0 records in [2025-09-23 14:58:34.540] 512+0 records out [2025-09-23 14:58:34.572] Waiting data available... [2025-09-23 14:58:34.588] Starting syslogd/klogd: done [2025-09-23 14:58:34.604] DML Start [2025-09-23 14:58:34.780] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:58:34.988] DML res1: 0 [2025-09-23 14:58:35.435] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:58:35.435] Read Success [2025-09-23 14:58:35.435] Verifying certificate... [2025-09-23 14:58:35.674] Verified OK [2025-09-23 14:58:35.706] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:58:37.370] Verified OK [2025-09-23 14:58:37.373] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:58:38.003] Verified OK [2025-09-23 14:58:38.003] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:58:40.705] fs.protected_hardlinks = 1 [2025-09-23 14:58:40.721] fs.protected_symlinks = 1 [2025-09-23 14:58:40.721] kernel.modules_disabled = 1 [2025-09-23 14:58:40.929] [2025-09-23 14:58:40.929] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:58:42.084] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:58:49.908] SBL1:1210.0.1.0 [2025-09-23 14:58:49.940] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:58:51.522] SBL2:1210.0.1.0 [2025-09-23 14:58:51.554] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:58:51.667] j-A [2025-09-23 14:58:59.038] The R5 Autosar Classic is running [2025-09-23 14:58:59.038] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:58:59.038] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:58:59.645] INIT: version 2.96 booting [2025-09-23 14:58:59.757] INIT: Entering runlevel: 5 [2025-09-23 14:58:59.901] mtd24 attached [2025-09-23 14:58:59.917] mtd28 attached [2025-09-23 14:58:59.933] mtd32 attached [2025-09-23 14:58:59.981] RTNETLINK answers: File exists [2025-09-23 14:58:59.981] ubi0:textures is mounted. [2025-09-23 14:59:00.035] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:59:00.035] ubi1:animations is mounted. [2025-09-23 14:59:00.035] ubi2:dml_code is mounted. [2025-09-23 14:59:00.035] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:59:00.035] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:59:00.035] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:59:00.035] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:59:00.035] data.LB_FadeInType0=100 [2025-09-23 14:59:00.035] data.CHLH_FadeInType0=0 [2025-09-23 14:59:00.035] data.WU_FadeInDelay=0 [2025-09-23 14:59:00.035] max_time_out=0 [2025-09-23 14:59:00.035] No splash screen [2025-09-23 14:59:00.035] stop dss Done [2025-09-23 14:59:00.122] /dev/mem opened. [2025-09-23 14:59:00.122] Memory mapped at address 0xffffad4a4000. [2025-09-23 14:59:00.122] Read at address 0x00600018 (0xffffad4a4018): 0x00000000 [2025-09-23 14:59:00.122] Write at address 0x00600018 (0xffffad4a4018): 0x00400040, readback 0x00400040 [2025-09-23 14:59:00.122] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:59:00.122] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:59:00.233] Loaded PowerVR consumer services. [2025-09-23 14:59:00.346] 512+0 records in [2025-09-23 14:59:00.346] 512+0 records out [2025-09-23 14:59:00.362] Waiting data available... [2025-09-23 14:59:00.394] Starting syslogd/klogd: done [2025-09-23 14:59:00.410] DML Start [2025-09-23 14:59:00.601] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:59:00.825] DML res1: 0 [2025-09-23 14:59:01.287] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:59:01.287] Read Success [2025-09-23 14:59:01.287] Verifying certificate... [2025-09-23 14:59:01.542] Verified OK [2025-09-23 14:59:01.558] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:59:03.245] Verified OK [2025-09-23 14:59:03.245] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:59:03.846] Verified OK [2025-09-23 14:59:03.846] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:59:06.483] fs.protected_hardlinks = 1 [2025-09-23 14:59:06.483] fs.protected_symlinks = 1 [2025-09-23 14:59:06.483] kernel.modules_disabled = 1 [2025-09-23 14:59:06.659] [2025-09-23 14:59:06.659] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:59:07.936] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:59:15.688] SBL1:1210.0.1.0 [2025-09-23 14:59:15.720] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:59:17.302] SBL2:1210.0.1.0 [2025-09-23 14:59:17.334] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:59:17.430] j-A [2025-09-23 14:59:24.786] The R5 Autosar Classic is running [2025-09-23 14:59:24.810] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:59:24.810] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:59:25.417] INIT: version 2.96 booting [2025-09-23 14:59:25.529] INIT: Entering runlevel: 5 [2025-09-23 14:59:25.690] mtd28 attached [2025-09-23 14:59:25.690] mtd24 attached [2025-09-23 14:59:25.705] mtd32 attached [2025-09-23 14:59:25.753] ubi0:animations is mounted. [2025-09-23 14:59:25.753] RTNETLINK answers: File exists [2025-09-23 14:59:25.817] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:59:25.817] ubi2:dml_code is mounted. [2025-09-23 14:59:25.817] ubi1:textures is mounted. [2025-09-23 14:59:25.817] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:59:25.817] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:59:25.817] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:59:25.817] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:59:25.817] data.LB_FadeInType0=100 [2025-09-23 14:59:25.817] data.CHLH_FadeInType0=0 [2025-09-23 14:59:25.817] data.WU_FadeInDelay=0 [2025-09-23 14:59:25.817] max_time_out=0 [2025-09-23 14:59:25.817] No splash screen [2025-09-23 14:59:25.817] stop dss Done [2025-09-23 14:59:25.864] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:59:25.897] /dev/mem opened. [2025-09-23 14:59:25.897] Memory mapped at address 0xffffa2794000. [2025-09-23 14:59:25.897] Read at address 0x00600018 (0xffffa2794018): 0x00000000 [2025-09-23 14:59:25.897] Write at address 0x00600018 (0xffffa2794018): 0x00400040, readback 0x00400040 [2025-09-23 14:59:25.897] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:59:26.073] Loaded PowerVR consumer services. [2025-09-23 14:59:26.104] 512+0 records in [2025-09-23 14:59:26.104] 512+0 records out [2025-09-23 14:59:26.152] Waiting data available... [2025-09-23 14:59:26.152] Starting syslogd/klogd: done [2025-09-23 14:59:26.168] DML Start [2025-09-23 14:59:26.361] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:59:26.552] DML res1: 0 [2025-09-23 14:59:27.000] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:59:27.021] Read Success [2025-09-23 14:59:27.021] Verifying certificate... [2025-09-23 14:59:27.276] Verified OK [2025-09-23 14:59:27.292] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:59:28.887] Verified OK [2025-09-23 14:59:28.887] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:59:29.502] Verified OK [2025-09-23 14:59:29.502] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:59:32.363] fs.protected_hardlinks = 1 [2025-09-23 14:59:32.363] fs.protected_symlinks = 1 [2025-09-23 14:59:32.363] kernel.modules_disabled = 1 [2025-09-23 14:59:32.555] [2025-09-23 14:59:32.555] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:59:33.705] RTNETLINK answers: Cannot assign requested address [2025-09-23 14:59:41.522] SBL1:1210.0.1.0 [2025-09-23 14:59:41.570] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:59:43.136] SBL2:1210.0.1.0 [2025-09-23 14:59:43.173] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 14:59:43.279] j-A [2025-09-23 14:59:50.652] The R5 Autosar Classic is running [2025-09-23 14:59:50.652] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 14:59:50.652] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 14:59:51.260] INIT: version 2.96 booting [2025-09-23 14:59:51.371] INIT: Entering runlevel: 5 [2025-09-23 14:59:51.688] mtd24 attached [2025-09-23 14:59:51.688] mtd28 attached [2025-09-23 14:59:51.688] mtd32 attached [2025-09-23 14:59:51.688] RTNETLINK answers: File exists [2025-09-23 14:59:51.688] ubi0:textures is mounted. [2025-09-23 14:59:51.688] ubi1:animations is mounted. [2025-09-23 14:59:51.688] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 14:59:51.688] ubi2:dml_code is mounted. [2025-09-23 14:59:51.688] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 14:59:51.688] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 14:59:51.688] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 14:59:51.688] data.LB_FadeInType0=100 [2025-09-23 14:59:51.688] data.CHLH_FadeInType0=0 [2025-09-23 14:59:51.688] data.WU_FadeInDelay=0 [2025-09-23 14:59:51.688] max_time_out=0 [2025-09-23 14:59:51.688] No splash screen [2025-09-23 14:59:51.688] stop dss Done [2025-09-23 14:59:51.688] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 14:59:51.688] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 14:59:51.701] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 14:59:51.732] /dev/mem opened. [2025-09-23 14:59:51.732] Memory mapped at address 0xffffa85b0000. [2025-09-23 14:59:51.732] Read at address 0x00600018 (0xffffa85b0018): 0x00000000 [2025-09-23 14:59:51.732] Write at address 0x00600018 (0xffffa85b0018): 0x00400040, readback 0x00400040 [2025-09-23 14:59:51.940] Loaded PowerVR consumer services. [2025-09-23 14:59:51.995] 512+0 records in [2025-09-23 14:59:51.995] 512+0 records out [2025-09-23 14:59:51.995] Waiting data available... [2025-09-23 14:59:52.026] Starting syslogd/klogd: done [2025-09-23 14:59:52.043] DML Start [2025-09-23 14:59:52.235] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 14:59:52.459] DML res1: 0 [2025-09-23 14:59:52.905] Read DML Algo certificate (mtd31) and save to file [2025-09-23 14:59:52.905] Read Success [2025-09-23 14:59:52.905] Verifying certificate... [2025-09-23 14:59:53.145] Verified OK [2025-09-23 14:59:53.161] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 14:59:54.854] Verified OK [2025-09-23 14:59:54.854] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 14:59:55.490] Verified OK [2025-09-23 14:59:55.490] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 14:59:58.127] fs.protected_hardlinks = 1 [2025-09-23 14:59:58.143] fs.protected_symlinks = 1 [2025-09-23 14:59:58.143] kernel.modules_disabled = 1 [2025-09-23 14:59:58.335] [2025-09-23 14:59:58.335] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 14:59:59.566] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:00:07.334] SBL1:1210.0.1.0 [2025-09-23 15:00:07.382] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:00:08.948] SBL2:1210.0.1.0 [2025-09-23 15:00:08.985] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:00:09.092] j-A [2025-09-23 15:00:16.466] The R5 Autosar Classic is running [2025-09-23 15:00:16.466] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:00:16.466] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:00:17.074] INIT: version 2.96 booting [2025-09-23 15:00:17.186] INIT: Entering runlevel: 5 [2025-09-23 15:00:17.501] mtd32 attached [2025-09-23 15:00:17.501] mtd24 attached [2025-09-23 15:00:17.501] mtd28 attached [2025-09-23 15:00:17.501] ubi0:dml_code is mounted. [2025-09-23 15:00:17.501] RTNETLINK answers: File exists [2025-09-23 15:00:17.501] ubi1:textures is mounted. [2025-09-23 15:00:17.501] ubi2:animations is mounted. [2025-09-23 15:00:17.501] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:00:17.501] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:00:17.501] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:00:17.501] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:00:17.501] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:00:17.501] data.LB_FadeInType0=100 [2025-09-23 15:00:17.501] data.CHLH_FadeInType0=0 [2025-09-23 15:00:17.501] data.WU_FadeInDelay=0 [2025-09-23 15:00:17.501] max_time_out=0 [2025-09-23 15:00:17.501] No splash screen [2025-09-23 15:00:17.501] stop dss Done [2025-09-23 15:00:17.501] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:00:17.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:00:17.509] /dev/mem opened. [2025-09-23 15:00:17.541] Memory mapped at address 0xffffbafd1000. [2025-09-23 15:00:17.541] Read at address 0x00600018 (0xffffbafd1018): 0x00000000 [2025-09-23 15:00:17.541] Write at address 0x00600018 (0xffffbafd1018): 0x00400040, readback 0x00400040 [2025-09-23 15:00:17.668] Loaded PowerVR consumer services. [2025-09-23 15:00:17.795] Waiting data available... [2025-09-23 15:00:17.795] 512+0 records in [2025-09-23 15:00:17.795] 512+0 records out [2025-09-23 15:00:17.810] Starting syslogd/klogd: done [2025-09-23 15:00:17.826] DML Start [2025-09-23 15:00:18.018] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:00:18.258] DML res1: 0 [2025-09-23 15:00:18.668] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:00:18.668] Read Success [2025-09-23 15:00:18.668] Verifying certificate... [2025-09-23 15:00:18.908] Verified OK [2025-09-23 15:00:18.924] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:00:20.674] Verified OK [2025-09-23 15:00:20.674] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:00:21.219] Verified OK [2025-09-23 15:00:21.219] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:00:23.872] fs.protected_hardlinks = 1 [2025-09-23 15:00:23.888] fs.protected_symlinks = 1 [2025-09-23 15:00:23.888] kernel.modules_disabled = 1 [2025-09-23 15:00:24.079] [2025-09-23 15:00:24.079] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:00:25.320] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:00:33.150] SBL1:1210.0.1.0 [2025-09-23 15:00:33.182] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:00:34.764] SBL2:1210.0.1.0 [2025-09-23 15:00:34.798] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:00:34.908] j-A [2025-09-23 15:00:42.247] The R5 Autosar Classic is running [2025-09-23 15:00:42.272] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:00:42.272] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:00:42.880] INIT: version 2.96 booting [2025-09-23 15:00:42.992] INIT: Entering runlevel: 5 [2025-09-23 15:00:43.282] mtd28 attached [2025-09-23 15:00:43.282] mtd24 attached [2025-09-23 15:00:43.282] mtd32 attached [2025-09-23 15:00:43.282] RTNETLINK answers: File exists [2025-09-23 15:00:43.282] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:00:43.282] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:00:43.282] ubi0:animations is mounted. [2025-09-23 15:00:43.282] ubi1:textures is mounted. [2025-09-23 15:00:43.282] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:00:43.282] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:00:43.282] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:00:43.282] ubi2:dml_code is mounted. [2025-09-23 15:00:43.287] data.LB_FadeInType0=100 [2025-09-23 15:00:43.287] data.CHLH_FadeInType0=0 [2025-09-23 15:00:43.287] data.WU_FadeInDelay=0 [2025-09-23 15:00:43.287] max_time_out=0 [2025-09-23 15:00:43.287] No splash screen [2025-09-23 15:00:43.287] stop dss Done [2025-09-23 15:00:43.319] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:00:43.359] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:00:43.359] /dev/mem opened. [2025-09-23 15:00:43.359] Memory mapped at address 0xffffbea53000. [2025-09-23 15:00:43.359] Read at address 0x00600018 (0xffffbea53018): 0x00000000 [2025-09-23 15:00:43.359] Write at address 0x00600018 (0xffffbea53018): 0x00400040, readback 0x00400040 [2025-09-23 15:00:43.550] Loaded PowerVR consumer services. [2025-09-23 15:00:43.567] 512+0 records in [2025-09-23 15:00:43.567] 512+0 records out [2025-09-23 15:00:43.614] Starting syslogd/klogd: done [2025-09-23 15:00:43.678] Waiting data available... [2025-09-23 15:00:43.678] DML Start [2025-09-23 15:00:43.871] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:00:44.062] DML res1: 0 [2025-09-23 15:00:44.525] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:00:44.525] Read Success [2025-09-23 15:00:44.525] Verifying certificate... [2025-09-23 15:00:44.812] Verified OK [2025-09-23 15:00:44.812] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:00:46.426] Verified OK [2025-09-23 15:00:46.426] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:00:47.033] Verified OK [2025-09-23 15:00:47.054] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:00:49.709] fs.protected_hardlinks = 1 [2025-09-23 15:00:49.736] fs.protected_symlinks = 1 [2025-09-23 15:00:49.736] kernel.modules_disabled = 1 [2025-09-23 15:00:49.915] [2025-09-23 15:00:49.915] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:00:51.158] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:00:58.949] SBL1:1210.0.1.0 [2025-09-23 15:00:58.998] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:01:00.564] SBL2:1210.0.1.0 [2025-09-23 15:01:00.612] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:01:00.709] j-A [2025-09-23 15:01:08.063] The R5 Autosar Classic is running [2025-09-23 15:01:08.085] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:01:08.085] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:01:08.693] INIT: version 2.96 booting [2025-09-23 15:01:08.805] INIT: Entering runlevel: 5 [2025-09-23 15:01:08.964] mtd28 attached [2025-09-23 15:01:08.964] mtd24 attached [2025-09-23 15:01:08.980] mtd32 attached [2025-09-23 15:01:09.012] ubi0:animations is mounted. [2025-09-23 15:01:09.119] RTNETLINK answers: File exists [2025-09-23 15:01:09.120] ubi1:textures is mounted. [2025-09-23 15:01:09.120] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:01:09.120] ubi2:dml_code is mounted. [2025-09-23 15:01:09.120] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:01:09.120] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:01:09.120] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:01:09.120] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:01:09.120] data.LB_FadeInType0=100 [2025-09-23 15:01:09.120] data.CHLH_FadeInType0=0 [2025-09-23 15:01:09.120] data.WU_FadeInDelay=0 [2025-09-23 15:01:09.120] max_time_out=0 [2025-09-23 15:01:09.120] No splash screen [2025-09-23 15:01:09.120] stop dss Done [2025-09-23 15:01:09.187] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:01:09.187] /dev/mem opened. [2025-09-23 15:01:09.187] Memory mapped at address 0xffffb47b3000. [2025-09-23 15:01:09.187] Read at address 0x00600018 (0xffffb47b3018): 0x00000000 [2025-09-23 15:01:09.187] Write at address 0x00600018 (0xffffb47b3018): 0x00400040, readback 0x00400040 [2025-09-23 15:01:09.187] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:01:09.282] Loaded PowerVR consumer services. [2025-09-23 15:01:09.395] 512+0 records in [2025-09-23 15:01:09.395] 512+0 records out [2025-09-23 15:01:09.426] Starting syslogd/klogd: Waiting data available... [2025-09-23 15:01:09.442] done [2025-09-23 15:01:09.443] DML Start [2025-09-23 15:01:09.618] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:01:09.842] DML res1: 0 [2025-09-23 15:01:10.318] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:01:10.318] Read Success [2025-09-23 15:01:10.318] Verifying certificate... [2025-09-23 15:01:10.542] Verified OK [2025-09-23 15:01:10.558] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:01:12.313] Verified OK [2025-09-23 15:01:12.313] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:01:12.849] Verified OK [2025-09-23 15:01:12.849] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:01:15.520] fs.protected_hardlinks = 1 [2025-09-23 15:01:15.520] fs.protected_symlinks = 1 [2025-09-23 15:01:15.535] kernel.modules_disabled = 1 [2025-09-23 15:01:15.728] [2025-09-23 15:01:15.728] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:01:16.950] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:01:24.773] SBL1:1210.0.1.0 [2025-09-23 15:01:24.805] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:01:26.387] SBL2:1210.0.1.0 [2025-09-23 15:01:26.423] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:01:26.532] j-A [2025-09-23 15:01:33.902] The R5 Autosar Classic is running [2025-09-23 15:01:33.902] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:01:33.902] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:01:34.509] INIT: version 2.96 booting [2025-09-23 15:01:34.621] INIT: Entering runlevel: 5 [2025-09-23 15:01:34.950] mtd32 attached [2025-09-23 15:01:34.950] mtd28 attached [2025-09-23 15:01:34.950] mtd24 attached [2025-09-23 15:01:34.950] RTNETLINK answers: File exists [2025-09-23 15:01:34.950] ubi0:dml_code is mounted. [2025-09-23 15:01:34.950] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:01:34.950] ubi2:textures is mounted. [2025-09-23 15:01:34.950] ubi1:animations is mounted. [2025-09-23 15:01:34.950] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:01:34.950] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:01:34.950] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:01:34.950] data.LB_FadeInType0=100 [2025-09-23 15:01:34.950] data.CHLH_FadeInType0=0 [2025-09-23 15:01:34.950] data.WU_FadeInDelay=0 [2025-09-23 15:01:34.950] max_time_out=0 [2025-09-23 15:01:34.950] No splash screen [2025-09-23 15:01:34.950] stop dss Done [2025-09-23 15:01:34.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:01:34.959] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:01:34.991] /dev/mem opened. [2025-09-23 15:01:34.991] Memory mapped at address 0xffff9ab99000. [2025-09-23 15:01:34.991] Read at address 0x00600018 (0xffff9ab99018): 0x00000000 [2025-09-23 15:01:34.991] Write at address 0x00600018 (0xffff9ab99018): 0x00400040, readback 0x00400040 [2025-09-23 15:01:34.991] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:01:35.166] Loaded PowerVR consumer services. [2025-09-23 15:01:35.215] 512+0 records in [2025-09-23 15:01:35.215] 512+0 records out [2025-09-23 15:01:35.231] Waiting data available... [2025-09-23 15:01:35.246] Starting syslogd/klogd: done [2025-09-23 15:01:35.263] DML Start [2025-09-23 15:01:35.454] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:01:35.963] DML res1: 0 [2025-09-23 15:01:36.123] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:01:36.123] Read Success [2025-09-23 15:01:36.123] Verifying certificate... [2025-09-23 15:01:36.379] Verified OK [2025-09-23 15:01:36.395] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:01:38.068] Verified OK [2025-09-23 15:01:38.068] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:01:38.740] Verified OK [2025-09-23 15:01:38.740] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:01:41.329] fs.protected_hardlinks = 1 [2025-09-23 15:01:41.345] fs.protected_symlinks = 1 [2025-09-23 15:01:41.345] kernel.modules_disabled = 1 [2025-09-23 15:01:41.553] [2025-09-23 15:01:41.553] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:01:42.767] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:01:50.570] SBL1:1210.0.1.0 [2025-09-23 15:01:50.618] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:01:52.185] SBL2:1210.0.1.0 [2025-09-23 15:01:52.233] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:01:52.328] j-A [2025-09-23 15:01:59.683] The R5 Autosar Classic is running [2025-09-23 15:01:59.705] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:01:59.705] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:02:00.312] INIT: version 2.96 booting [2025-09-23 15:02:00.425] INIT: Entering runlevel: 5 [2025-09-23 15:02:00.568] mtd24 attached [2025-09-23 15:02:00.584] mtd28 attached [2025-09-23 15:02:00.600] mtd32 attached [2025-09-23 15:02:00.708] ubi0:textures is mounted. [2025-09-23 15:02:00.708] RTNETLINK answers: File exists [2025-09-23 15:02:00.709] ubi1:animations is mounted. [2025-09-23 15:02:00.709] ubi2:dml_code is mounted. [2025-09-23 15:02:00.709] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:02:00.709] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:02:00.709] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:02:00.709] data.LB_FadeInType0=100 [2025-09-23 15:02:00.709] data.CHLH_FadeInType0=0 [2025-09-23 15:02:00.709] data.WU_FadeInDelay=0 [2025-09-23 15:02:00.709] max_time_out=0 [2025-09-23 15:02:00.709] No splash screen [2025-09-23 15:02:00.709] stop dss Done [2025-09-23 15:02:00.709] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:02:00.709] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:02:00.779] /dev/mem opened. [2025-09-23 15:02:00.779] Memory mapped at address 0xffffb04bc000. [2025-09-23 15:02:00.779] Read at address 0x00600018 (0xffffb04bc018): 0x00000000 [2025-09-23 15:02:00.779] Write at address 0x00600018 (0xffffb04bc018): 0x00400040, readback 0x00400040 [2025-09-23 15:02:00.826] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:02:00.826] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:02:01.008] 512+0 records in [2025-09-23 15:02:01.008] 512+0 records out [2025-09-23 15:02:01.008] Loaded PowerVR consumer services. [2025-09-23 15:02:01.056] Starting syslogd/klogd: done [2025-09-23 15:02:01.088] Waiting data available... [2025-09-23 15:02:01.088] DML Start [2025-09-23 15:02:01.281] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:02:01.504] DML res1: 0 [2025-09-23 15:02:01.974] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:02:01.974] Read Success [2025-09-23 15:02:01.974] Verifying certificate... [2025-09-23 15:02:02.263] Verified OK [2025-09-23 15:02:02.279] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:02:03.989] Verified OK [2025-09-23 15:02:03.989] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:02:04.569] Verified OK [2025-09-23 15:02:04.569] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:02:07.159] fs.protected_hardlinks = 1 [2025-09-23 15:02:07.189] fs.protected_symlinks = 1 [2025-09-23 15:02:07.189] kernel.modules_disabled = 1 [2025-09-23 15:02:07.364] [2025-09-23 15:02:07.364] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:02:08.571] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:02:16.393] SBL1:1210.0.1.0 [2025-09-23 15:02:16.424] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:02:18.008] SBL2:1210.0.1.0 [2025-09-23 15:02:18.040] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:02:18.151] j-A [2025-09-23 15:02:25.523] The R5 Autosar Classic is running [2025-09-23 15:02:25.523] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:02:25.523] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:02:26.130] INIT: version 2.96 booting [2025-09-23 15:02:26.242] INIT: Entering runlevel: 5 [2025-09-23 15:02:26.402] mtd24 attached [2025-09-23 15:02:26.418] mtd32 attached [2025-09-23 15:02:26.434] mtd28 attached [2025-09-23 15:02:26.450] ubi0:textures is mounted. [2025-09-23 15:02:26.482] RTNETLINK answers: File exists [2025-09-23 15:02:26.537] ubi2:animations is mounted. [2025-09-23 15:02:26.537] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:02:26.537] ubi1:dml_code is mounted. [2025-09-23 15:02:26.537] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:02:26.537] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:02:26.537] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:02:26.537] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:02:26.537] data.LB_FadeInType0=100 [2025-09-23 15:02:26.537] data.CHLH_FadeInType0=0 [2025-09-23 15:02:26.537] data.WU_FadeInDelay=0 [2025-09-23 15:02:26.537] max_time_out=0 [2025-09-23 15:02:26.537] No splash screen [2025-09-23 15:02:26.537] stop dss Done [2025-09-23 15:02:26.584] /dev/mem opened. [2025-09-23 15:02:26.621] Memory mapped at address 0xffffbd6ac000. [2025-09-23 15:02:26.621] Read at address 0x00600018 (0xffffbd6ac018): 0x00000000 [2025-09-23 15:02:26.621] Write at address 0x00600018 (0xffffbd6ac018): 0x00400040, readback 0x00400040 [2025-09-23 15:02:26.621] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:02:26.621] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:02:26.828] Loaded PowerVR consumer services. [2025-09-23 15:02:26.860] 512+0 records in [2025-09-23 15:02:26.860] 512+0 records out [2025-09-23 15:02:26.892] Starting syslogd/klogd: done [2025-09-23 15:02:26.941] Waiting data available... [2025-09-23 15:02:26.941] DML Start [2025-09-23 15:02:27.117] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:02:27.324] DML res1: 0 [2025-09-23 15:02:27.777] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:02:27.777] Read Success [2025-09-23 15:02:27.777] Verifying certificate... [2025-09-23 15:02:28.049] Verified OK [2025-09-23 15:02:28.081] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:02:29.664] Verified OK [2025-09-23 15:02:29.664] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:02:30.388] Verified OK [2025-09-23 15:02:30.388] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:02:33.027] fs.protected_hardlinks = 1 [2025-09-23 15:02:33.027] fs.protected_symlinks = 1 [2025-09-23 15:02:33.043] kernel.modules_disabled = 1 [2025-09-23 15:02:33.235] [2025-09-23 15:02:33.235] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:02:34.418] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:02:42.143] SBL1:1210.0.1.0 [2025-09-23 15:02:42.191] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:02:43.757] SBL2:1210.0.1.0 [2025-09-23 15:02:43.789] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:02:43.901] j-A [2025-09-23 15:02:51.254] The R5 Autosar Classic is running [2025-09-23 15:02:51.254] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:02:51.275] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:02:51.882] INIT: version 2.96 booting [2025-09-23 15:02:51.994] INIT: Entering runlevel: 5 [2025-09-23 15:02:52.139] mtd24 attached [2025-09-23 15:02:52.155] mtd28 attached [2025-09-23 15:02:52.171] mtd32 attached [2025-09-23 15:02:52.203] ubi0:textures is mounted. [2025-09-23 15:02:52.219] RTNETLINK answers: File exists [2025-09-23 15:02:52.276] ubi2:dml_code is mounted. [2025-09-23 15:02:52.276] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:02:52.276] ubi1:animations is mounted. [2025-09-23 15:02:52.276] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:02:52.276] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:02:52.276] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:02:52.276] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:02:52.276] data.LB_FadeInType0=100 [2025-09-23 15:02:52.276] data.CHLH_FadeInType0=0 [2025-09-23 15:02:52.276] data.WU_FadeInDelay=0 [2025-09-23 15:02:52.276] max_time_out=0 [2025-09-23 15:02:52.276] No splash screen [2025-09-23 15:02:52.276] stop dss Done [2025-09-23 15:02:52.324] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:02:52.324] /dev/mem opened. [2025-09-23 15:02:52.356] Memory mapped at address 0xffffa8517000. [2025-09-23 15:02:52.356] Read at address 0x00600018 (0xffffa8517018): 0x00000000 [2025-09-23 15:02:52.356] Write at address 0x00600018 (0xffffa8517018): 0x00400040, readback 0x00400040 [2025-09-23 15:02:52.356] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:02:52.468] Loaded PowerVR consumer services. [2025-09-23 15:02:52.579] Waiting data available... [2025-09-23 15:02:52.595] 512+0 records in [2025-09-23 15:02:52.595] 512+0 records out [2025-09-23 15:02:52.643] Starting syslogd/klogd: done [2025-09-23 15:02:52.659] DML Start [2025-09-23 15:02:52.835] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:02:53.075] DML res1: 0 [2025-09-23 15:02:53.491] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:02:53.512] Read Success [2025-09-23 15:02:53.512] Verifying certificate... [2025-09-23 15:02:53.783] Verified OK [2025-09-23 15:02:53.799] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:02:55.462] Verified OK [2025-09-23 15:02:55.462] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:02:56.081] Verified OK [2025-09-23 15:02:56.081] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:02:58.749] fs.protected_hardlinks = 1 [2025-09-23 15:02:58.749] fs.protected_symlinks = 1 [2025-09-23 15:02:58.749] kernel.modules_disabled = 1 [2025-09-23 15:02:58.925] [2025-09-23 15:02:58.925] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:03:00.172] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:03:07.910] SBL1:1210.0.1.0 [2025-09-23 15:03:07.941] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:03:09.524] SBL2:1210.0.1.0 [2025-09-23 15:03:09.556] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:03:09.668] j-A [2025-09-23 15:03:17.037] The R5 Autosar Classic is running [2025-09-23 15:03:17.037] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:03:17.037] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:03:17.645] INIT: version 2.96 booting [2025-09-23 15:03:17.757] INIT: Entering runlevel: 5 [2025-09-23 15:03:17.917] mtd32 attached [2025-09-23 15:03:17.917] mtd28 attached [2025-09-23 15:03:17.933] mtd24 attached [2025-09-23 15:03:17.981] ubi0:dml_code is mounted. [2025-09-23 15:03:17.981] RTNETLINK answers: File exists [2025-09-23 15:03:18.044] ubi2:textures is mounted. [2025-09-23 15:03:18.044] ubi1:animations is mounted. [2025-09-23 15:03:18.044] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:03:18.044] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:03:18.044] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:03:18.044] data.LB_FadeInType0=100 [2025-09-23 15:03:18.044] data.CHLH_FadeInType0=0 [2025-09-23 15:03:18.044] data.WU_FadeInDelay=0 [2025-09-23 15:03:18.044] max_time_out=0 [2025-09-23 15:03:18.044] No splash screen [2025-09-23 15:03:18.044] stop dss Done [2025-09-23 15:03:18.044] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:03:18.044] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:03:18.112] /dev/mem opened. [2025-09-23 15:03:18.112] Memory mapped at address 0xffffb51c8000. [2025-09-23 15:03:18.112] Read at address 0x00600018 (0xffffb51c8018): 0x00000000 [2025-09-23 15:03:18.112] Write at address 0x00600018 (0xffffb51c8018): 0x00400040, readback 0x00400040 [2025-09-23 15:03:18.112] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:03:18.128] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:03:18.319] Loaded PowerVR consumer services. [2025-09-23 15:03:18.351] 512+0 records in [2025-09-23 15:03:18.351] 512+0 records out [2025-09-23 15:03:18.400] Starting syslogd/klogd: Waiting data available... [2025-09-23 15:03:18.416] done [2025-09-23 15:03:18.416] DML Start [2025-09-23 15:03:18.592] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:03:18.879] DML res1: 0 [2025-09-23 15:03:19.222] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:03:19.222] Read Success [2025-09-23 15:03:19.222] Verifying certificate... [2025-09-23 15:03:19.446] Verified OK [2025-09-23 15:03:19.462] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:03:21.057] Verified OK [2025-09-23 15:03:21.057] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:03:21.695] Verified OK [2025-09-23 15:03:21.695] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:03:24.445] fs.protected_hardlinks = 1 [2025-09-23 15:03:24.445] fs.protected_symlinks = 1 [2025-09-23 15:03:24.461] kernel.modules_disabled = 1 [2025-09-23 15:03:24.669] [2025-09-23 15:03:24.669] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:03:25.903] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:03:33.711] SBL1:1210.0.1.0 [2025-09-23 15:03:33.743] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:03:35.326] SBL2:1210.0.1.0 [2025-09-23 15:03:35.357] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:03:35.469] j-A [2025-09-23 15:03:42.806] The R5 Autosar Classic is running [2025-09-23 15:03:42.837] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:03:42.837] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:03:43.445] INIT: version 2.96 booting [2025-09-23 15:03:43.557] INIT: Entering runlevel: 5 [2025-09-23 15:03:43.717] mtd32 attached [2025-09-23 15:03:43.717] mtd24 attached [2025-09-23 15:03:43.733] mtd28 attached [2025-09-23 15:03:43.780] RTNETLINK answers: File exists [2025-09-23 15:03:43.825] ubi0:dml_code is mounted. [2025-09-23 15:03:43.825] ubi1:textures is mounted. [2025-09-23 15:03:43.825] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:03:43.825] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:03:43.825] ubi2:animations is mounted. [2025-09-23 15:03:43.825] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:03:43.825] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:03:43.825] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:03:43.851] data.LB_FadeInType0=100 [2025-09-23 15:03:43.851] data.CHLH_FadeInType0=0 [2025-09-23 15:03:43.851] data.WU_FadeInDelay=0 [2025-09-23 15:03:43.851] max_time_out=0 [2025-09-23 15:03:43.851] No splash screen [2025-09-23 15:03:43.851] stop dss Done [2025-09-23 15:03:43.876] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:03:43.876] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:03:43.892] /dev/mem opened. [2025-09-23 15:03:43.924] Memory mapped at address 0xffffa50da000. [2025-09-23 15:03:43.924] Read at address 0x00600018 (0xffffa50da018): 0x00000000 [2025-09-23 15:03:43.924] Write at address 0x00600018 (0xffffa50da018): 0x00400040, readback 0x00400040 [2025-09-23 15:03:44.021] Loaded PowerVR consumer services. [2025-09-23 15:03:44.148] 512+0 records in [2025-09-23 15:03:44.148] 512+0 records out [2025-09-23 15:03:44.164] Waiting data available... [2025-09-23 15:03:44.180] Starting syslogd/klogd: done [2025-09-23 15:03:44.196] DML Start [2025-09-23 15:03:44.388] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:03:44.612] DML res1: 0 [2025-09-23 15:03:45.065] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:03:45.065] Read Success [2025-09-23 15:03:45.065] Verifying certificate... [2025-09-23 15:03:45.306] Verified OK [2025-09-23 15:03:45.337] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:03:46.991] Verified OK [2025-09-23 15:03:46.991] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:03:47.630] Verified OK [2025-09-23 15:03:47.651] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:03:50.306] fs.protected_hardlinks = 1 [2025-09-23 15:03:50.333] fs.protected_symlinks = 1 [2025-09-23 15:03:50.333] kernel.modules_disabled = 1 [2025-09-23 15:03:50.525] [2025-09-23 15:03:50.525] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:03:51.686] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:03:59.550] SBL1:1210.0.1.0 [2025-09-23 15:03:59.582] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:04:01.165] SBL2:1210.0.1.0 [2025-09-23 15:04:01.197] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:04:01.292] j-A [2025-09-23 15:04:08.646] The R5 Autosar Classic is running [2025-09-23 15:04:08.671] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:04:08.671] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:04:09.278] INIT: version 2.96 booting [2025-09-23 15:04:09.391] INIT: Entering runlevel: 5 [2025-09-23 15:04:09.550] mtd28 attached [2025-09-23 15:04:09.550] mtd24 attached [2025-09-23 15:04:09.567] mtd32 attached [2025-09-23 15:04:09.615] ubi0:animations is mounted. [2025-09-23 15:04:09.615] RTNETLINK answers: File exists [2025-09-23 15:04:09.683] ubi2:dml_code is mounted. [2025-09-23 15:04:09.683] ubi1:textures is mounted. [2025-09-23 15:04:09.683] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:04:09.683] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:04:09.683] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:04:09.683] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:04:09.683] data.LB_FadeInType0=100 [2025-09-23 15:04:09.683] data.CHLH_FadeInType0=0 [2025-09-23 15:04:09.683] data.WU_FadeInDelay=0 [2025-09-23 15:04:09.683] max_time_out=0 [2025-09-23 15:04:09.683] No splash screen [2025-09-23 15:04:09.683] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:04:09.683] stop dss Done [2025-09-23 15:04:09.698] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:04:09.742] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:04:09.742] /dev/mem opened. [2025-09-23 15:04:09.742] Memory mapped at address 0xffff9df7e000. [2025-09-23 15:04:09.742] Read at address 0x00600018 (0xffff9df7e018): 0x00000000 [2025-09-23 15:04:09.742] Write at address 0x00600018 (0xffff9df7e018): 0x00400040, readback 0x00400040 [2025-09-23 15:04:09.965] Loaded PowerVR consumer services. [2025-09-23 15:04:10.297] Waiting data available... [2025-09-23 15:04:10.297] 512+0 records in [2025-09-23 15:04:10.297] 512+0 records out [2025-09-23 15:04:10.297] Starting syslogd/klogd: done [2025-09-23 15:04:10.297] DML Start [2025-09-23 15:04:10.297] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:04:10.444] DML res1: 0 [2025-09-23 15:04:10.907] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:04:10.907] Read Success [2025-09-23 15:04:10.907] Verifying certificate... [2025-09-23 15:04:11.163] Verified OK [2025-09-23 15:04:11.313] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:04:12.810] Verified OK [2025-09-23 15:04:12.810] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:04:13.433] Verified OK [2025-09-23 15:04:13.433] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:04:16.041] fs.protected_hardlinks = 1 [2025-09-23 15:04:16.042] fs.protected_symlinks = 1 [2025-09-23 15:04:16.042] kernel.modules_disabled = 1 [2025-09-23 15:04:16.231] [2025-09-23 15:04:16.231] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:04:17.527] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:04:25.353] SBL1:1210.0.1.0 [2025-09-23 15:04:25.401] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:04:26.969] SBL2:1210.0.1.0 [2025-09-23 15:04:27.016] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:04:27.112] j-A [2025-09-23 15:04:34.466] The R5 Autosar Classic is running [2025-09-23 15:04:34.466] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:04:34.488] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:04:35.095] INIT: version 2.96 booting [2025-09-23 15:04:35.206] INIT: Entering runlevel: 5 [2025-09-23 15:04:35.367] mtd28 attached [2025-09-23 15:04:35.367] mtd24 attached [2025-09-23 15:04:35.382] mtd32 attached [2025-09-23 15:04:35.431] ubi1:textures is mounted. [2025-09-23 15:04:35.431] ubi0:animations is mounted. [2025-09-23 15:04:35.499] RTNETLINK answers: File exists [2025-09-23 15:04:35.499] ubi2:dml_code is mounted. [2025-09-23 15:04:35.499] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:04:35.499] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:04:35.499] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:04:35.499] data.LB_FadeInType0=100 [2025-09-23 15:04:35.499] data.CHLH_FadeInType0=0 [2025-09-23 15:04:35.499] data.WU_FadeInDelay=0 [2025-09-23 15:04:35.499] max_time_out=0 [2025-09-23 15:04:35.499] No splash screen [2025-09-23 15:04:35.499] stop dss Done [2025-09-23 15:04:35.499] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:04:35.499] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:04:35.570] /dev/mem opened. [2025-09-23 15:04:35.570] Memory mapped at address 0xffff99046000. [2025-09-23 15:04:35.570] Read at address 0x00600018 (0xffff99046018): 0x00000000 [2025-09-23 15:04:35.570] Write at address 0x00600018 (0xffff99046018): 0x00400040, readback 0x00400040 [2025-09-23 15:04:35.570] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:04:35.570] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:04:35.634] Loaded PowerVR consumer services. [2025-09-23 15:04:35.820] 512+0 records in [2025-09-23 15:04:35.820] 512+0 records out [2025-09-23 15:04:35.820] Waiting data available... [2025-09-23 15:04:35.836] Starting syslogd/klogd: done [2025-09-23 15:04:35.852] DML Start [2025-09-23 15:04:36.027] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:04:36.300] DML res1: 0 [2025-09-23 15:04:36.706] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:04:36.706] Read Success [2025-09-23 15:04:36.706] Verifying certificate... [2025-09-23 15:04:36.931] Verified OK [2025-09-23 15:04:36.946] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:04:38.604] Verified OK [2025-09-23 15:04:38.604] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:04:39.245] Verified OK [2025-09-23 15:04:39.245] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:04:41.946] fs.protected_hardlinks = 1 [2025-09-23 15:04:41.962] fs.protected_symlinks = 1 [2025-09-23 15:04:41.962] kernel.modules_disabled = 1 [2025-09-23 15:04:42.154] [2025-09-23 15:04:42.154] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:04:43.350] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:04:51.164] SBL1:1210.0.1.0 [2025-09-23 15:04:51.196] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:04:52.778] SBL2:1210.0.1.0 [2025-09-23 15:04:52.810] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:04:52.922] j-A [2025-09-23 15:05:00.261] The R5 Autosar Classic is running [2025-09-23 15:05:00.286] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:05:00.286] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:05:00.893] INIT: version 2.96 booting [2025-09-23 15:05:01.006] INIT: Entering runlevel: 5 [2025-09-23 15:05:01.166] mtd28 attached [2025-09-23 15:05:01.181] mtd32 attached [2025-09-23 15:05:01.181] mtd24 attached [2025-09-23 15:05:01.213] ubi0:animations is mounted. [2025-09-23 15:05:01.294] RTNETLINK answers: File exists [2025-09-23 15:05:01.294] ubi2:textures is mounted. [2025-09-23 15:05:01.294] ubi1:dml_code is mounted. [2025-09-23 15:05:01.294] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:05:01.294] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:05:01.294] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:05:01.294] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:05:01.294] data.LB_FadeInType0=100 [2025-09-23 15:05:01.294] data.CHLH_FadeInType0=0 [2025-09-23 15:05:01.294] data.WU_FadeInDelay=0 [2025-09-23 15:05:01.294] max_time_out=0 [2025-09-23 15:05:01.294] No splash screen [2025-09-23 15:05:01.294] stop dss Done [2025-09-23 15:05:01.294] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:05:01.342] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:05:01.382] /dev/mem opened. [2025-09-23 15:05:01.382] Memory mapped at address 0xffffb3bfe000. [2025-09-23 15:05:01.382] Read at address 0x00600018 (0xffffb3bfe018): 0x00000000 [2025-09-23 15:05:01.382] Write at address 0x00600018 (0xffffb3bfe018): 0x00400040, readback 0x00400040 [2025-09-23 15:05:01.382] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:05:01.557] Loaded PowerVR consumer services. [2025-09-23 15:05:01.889] 512+0 records in [2025-09-23 15:05:01.889] 512+0 records out [2025-09-23 15:05:01.890] Waiting data available... [2025-09-23 15:05:01.890] Starting syslogd/klogd: done [2025-09-23 15:05:01.890] DML Start [2025-09-23 15:05:01.890] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:05:02.037] DML res1: 0 [2025-09-23 15:05:02.494] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:05:02.494] Read Success [2025-09-23 15:05:02.494] Verifying certificate... [2025-09-23 15:05:02.892] Verified OK [2025-09-23 15:05:02.892] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:05:04.231] Verified OK [2025-09-23 15:05:04.231] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:05:04.759] Verified OK [2025-09-23 15:05:04.759] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:05:07.589] fs.protected_hardlinks = 1 [2025-09-23 15:05:07.589] fs.protected_symlinks = 1 [2025-09-23 15:05:07.604] kernel.modules_disabled = 1 [2025-09-23 15:05:07.796] [2025-09-23 15:05:07.796] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:05:09.121] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:05:16.968] SBL1:1210.0.1.0 [2025-09-23 15:05:17.016] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:05:18.583] SBL2:1210.0.1.0 [2025-09-23 15:05:18.615] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:05:18.728] j-A [2025-09-23 15:05:26.099] The R5 Autosar Classic is running [2025-09-23 15:05:26.099] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:05:26.099] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:05:26.706] INIT: version 2.96 booting [2025-09-23 15:05:26.818] INIT: Entering runlevel: 5 [2025-09-23 15:05:26.962] mtd28 attached [2025-09-23 15:05:26.978] mtd24 attached [2025-09-23 15:05:26.994] mtd32 attached [2025-09-23 15:05:27.097] ubi0:animations is mounted. [2025-09-23 15:05:27.097] RTNETLINK answers: File exists [2025-09-23 15:05:27.097] ubi1:textures is mounted. [2025-09-23 15:05:27.097] ubi2:dml_code is mounted. [2025-09-23 15:05:27.097] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:05:27.097] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:05:27.097] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:05:27.097] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:05:27.097] data.LB_FadeInType0=100 [2025-09-23 15:05:27.097] data.CHLH_FadeInType0=0 [2025-09-23 15:05:27.097] data.WU_FadeInDelay=0 [2025-09-23 15:05:27.097] max_time_out=0 [2025-09-23 15:05:27.097] No splash screen [2025-09-23 15:05:27.097] stop dss Done [2025-09-23 15:05:27.097] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:05:27.161] /dev/mem opened. [2025-09-23 15:05:27.161] Memory mapped at address 0xffffb97ac000. [2025-09-23 15:05:27.161] Read at address 0x00600018 (0xffffb97ac018): 0x00000000 [2025-09-23 15:05:27.161] Write at address 0x00600018 (0xffffb97ac018): 0x00400040, readback 0x00400040 [2025-09-23 15:05:27.193] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:05:27.209] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:05:27.353] Loaded PowerVR consumer services. [2025-09-23 15:05:27.427] 512+0 records in [2025-09-23 15:05:27.427] 512+0 records out [2025-09-23 15:05:27.427] Waiting data available... [2025-09-23 15:05:27.459] Starting syslogd/klogd: done [2025-09-23 15:05:27.475] DML Start [2025-09-23 15:05:27.634] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:05:27.907] DML res1: 0 [2025-09-23 15:05:28.318] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:05:28.318] Read Success [2025-09-23 15:05:28.318] Verifying certificate... [2025-09-23 15:05:28.606] Verified OK [2025-09-23 15:05:28.622] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:05:30.373] Verified OK [2025-09-23 15:05:30.373] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:05:30.941] Verified OK [2025-09-23 15:05:30.941] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:05:33.387] fs.protected_hardlinks = 1 [2025-09-23 15:05:33.403] fs.protected_symlinks = 1 [2025-09-23 15:05:33.403] kernel.modules_disabled = 1 [2025-09-23 15:05:33.611] [2025-09-23 15:05:33.611] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:05:34.970] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:05:42.756] SBL1:1210.0.1.0 [2025-09-23 15:05:42.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:05:44.370] SBL2:1210.0.1.0 [2025-09-23 15:05:44.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:05:44.515] j-A [2025-09-23 15:05:51.853] The R5 Autosar Classic is running [2025-09-23 15:05:51.878] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:05:51.878] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:05:52.485] INIT: version 2.96 booting [2025-09-23 15:05:52.598] INIT: Entering runlevel: 5 [2025-09-23 15:05:52.758] mtd32 attached [2025-09-23 15:05:52.773] mtd28 attached [2025-09-23 15:05:52.773] mtd24 attached [2025-09-23 15:05:52.821] RTNETLINK answers: File exists [2025-09-23 15:05:52.857] ubi1:animations is mounted. [2025-09-23 15:05:52.857] ubi2:textures is mounted. [2025-09-23 15:05:52.857] ubi0:dml_code is mounted. [2025-09-23 15:05:52.857] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:05:52.857] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:05:52.896] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:05:52.896] data.LB_FadeInType0=100 [2025-09-23 15:05:52.896] data.CHLH_FadeInType0=0 [2025-09-23 15:05:52.896] data.WU_FadeInDelay=0 [2025-09-23 15:05:52.896] max_time_out=0 [2025-09-23 15:05:52.896] No splash screen [2025-09-23 15:05:52.896] stop dss Done [2025-09-23 15:05:52.896] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:05:52.896] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:05:52.965] /dev/mem opened. [2025-09-23 15:05:52.965] Memory mapped at address 0xffffbe105000. [2025-09-23 15:05:52.965] Read at address 0x00600018 (0xffffbe105018): 0x00000000 [2025-09-23 15:05:52.965] Write at address 0x00600018 (0xffffbe105018): 0x00400040, readback 0x00400040 [2025-09-23 15:05:53.028] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:05:53.028] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:05:53.092] Loaded PowerVR consumer services. [2025-09-23 15:05:53.189] 512+0 records in [2025-09-23 15:05:53.189] 512+0 records out [2025-09-23 15:05:53.220] Waiting data available... [2025-09-23 15:05:53.236] Starting syslogd/klogd: done [2025-09-23 15:05:53.252] DML Start [2025-09-23 15:05:53.396] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:05:53.604] DML res1: 0 [2025-09-23 15:05:54.147] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:05:54.168] Read Success [2025-09-23 15:05:54.168] Verifying certificate... [2025-09-23 15:05:54.392] Verified OK [2025-09-23 15:05:54.408] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:05:56.071] Verified OK [2025-09-23 15:05:56.071] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:05:56.727] Verified OK [2025-09-23 15:05:56.727] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:05:59.412] fs.protected_hardlinks = 1 [2025-09-23 15:05:59.412] fs.protected_symlinks = 1 [2025-09-23 15:05:59.428] kernel.modules_disabled = 1 [2025-09-23 15:05:59.635] [2025-09-23 15:05:59.635] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:06:00.746] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:06:08.560] SBL1:1210.0.1.0 [2025-09-23 15:06:08.591] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:06:10.175] SBL2:1210.0.1.0 [2025-09-23 15:06:10.207] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:06:10.319] j-A [2025-09-23 15:06:17.658] The R5 Autosar Classic is running [2025-09-23 15:06:17.683] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:06:17.683] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:06:18.290] INIT: version 2.96 booting [2025-09-23 15:06:18.402] INIT: Entering runlevel: 5 [2025-09-23 15:06:18.562] mtd28 attached [2025-09-23 15:06:18.562] mtd24 attached [2025-09-23 15:06:18.578] mtd32 attached [2025-09-23 15:06:18.626] RTNETLINK answers: File exists [2025-09-23 15:06:18.689] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:06:18.689] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:06:18.689] ubi0:animations is mounted. [2025-09-23 15:06:18.689] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:06:18.689] ubi1:textures is mounted. [2025-09-23 15:06:18.689] ubi2:dml_code is mounted. [2025-09-23 15:06:18.689] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:06:18.689] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:06:18.689] data.LB_FadeInType0=100 [2025-09-23 15:06:18.689] data.CHLH_FadeInType0=0 [2025-09-23 15:06:18.689] data.WU_FadeInDelay=0 [2025-09-23 15:06:18.689] max_time_out=0 [2025-09-23 15:06:18.689] No splash screen [2025-09-23 15:06:18.689] stop dss Done [2025-09-23 15:06:18.704] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:06:18.721] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:06:18.737] /dev/mem opened. [2025-09-23 15:06:18.769] Memory mapped at address 0xffff95307000. [2025-09-23 15:06:18.769] Read at address 0x00600018 (0xffff95307018): 0x00000000 [2025-09-23 15:06:18.769] Write at address 0x00600018 (0xffff95307018): 0x00400040, readback 0x00400040 [2025-09-23 15:06:18.945] Loaded PowerVR consumer services. [2025-09-23 15:06:18.993] Waiting data available... [2025-09-23 15:06:18.993] 512+0 records in [2025-09-23 15:06:18.993] 512+0 records out [2025-09-23 15:06:19.041] Starting syslogd/klogd: done [2025-09-23 15:06:19.057] DML Start [2025-09-23 15:06:19.265] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:06:19.488] DML res1: 0 [2025-09-23 15:06:19.895] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:06:19.895] Read Success [2025-09-23 15:06:19.895] Verifying certificate... [2025-09-23 15:06:20.119] Verified OK [2025-09-23 15:06:20.135] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:06:21.838] Verified OK [2025-09-23 15:06:21.838] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:06:22.420] Verified OK [2025-09-23 15:06:22.420] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:06:25.089] fs.protected_hardlinks = 1 [2025-09-23 15:06:25.089] fs.protected_symlinks = 1 [2025-09-23 15:06:25.105] kernel.modules_disabled = 1 [2025-09-23 15:06:25.298] [2025-09-23 15:06:25.298] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:06:26.545] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:06:34.326] SBL1:1210.0.1.0 [2025-09-23 15:06:34.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:06:35.941] SBL2:1210.0.1.0 [2025-09-23 15:06:35.989] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:06:36.085] j-A [2025-09-23 15:06:43.460] The R5 Autosar Classic is running [2025-09-23 15:06:43.460] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:06:43.460] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:06:44.068] INIT: version 2.96 booting [2025-09-23 15:06:44.180] INIT: Entering runlevel: 5 [2025-09-23 15:06:44.487] mtd32 attached [2025-09-23 15:06:44.487] mtd24 attached [2025-09-23 15:06:44.487] mtd28 attached [2025-09-23 15:06:44.487] ubi0:dml_code is mounted. [2025-09-23 15:06:44.487] RTNETLINK answers: File exists [2025-09-23 15:06:44.487] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:06:44.487] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:06:44.487] ubi1:textures is mounted. [2025-09-23 15:06:44.487] ubi2:animations is mounted. [2025-09-23 15:06:44.487] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:06:44.487] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:06:44.487] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:06:44.487] data.LB_FadeInType0=100 [2025-09-23 15:06:44.487] data.CHLH_FadeInType0=0 [2025-09-23 15:06:44.487] data.WU_FadeInDelay=0 [2025-09-23 15:06:44.487] max_time_out=0 [2025-09-23 15:06:44.487] No splash screen [2025-09-23 15:06:44.487] stop dss Done [2025-09-23 15:06:44.505] /dev/mem opened. [2025-09-23 15:06:44.542] Memory mapped at address 0xffffb31af000. [2025-09-23 15:06:44.542] Read at address 0x00600018 (0xffffb31af018): 0x00000000 [2025-09-23 15:06:44.542] Write at address 0x00600018 (0xffffb31af018): 0x00400040, readback 0x00400040 [2025-09-23 15:06:44.542] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:06:44.542] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:06:44.621] Loaded PowerVR consumer services. [2025-09-23 15:06:44.766] 512+0 records in [2025-09-23 15:06:44.766] 512+0 records out [2025-09-23 15:06:44.766] Waiting data available... [2025-09-23 15:06:44.813] Starting syslogd/klogd: done [2025-09-23 15:06:44.829] DML Start [2025-09-23 15:06:45.037] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:06:45.502] DML res1: 0 [2025-09-23 15:06:45.701] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:06:45.701] Read Success [2025-09-23 15:06:45.701] Verifying certificate... [2025-09-23 15:06:45.924] Verified OK [2025-09-23 15:06:45.924] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:06:47.533] Verified OK [2025-09-23 15:06:47.533] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:06:48.086] Verified OK [2025-09-23 15:06:48.086] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:06:50.932] fs.protected_hardlinks = 1 [2025-09-23 15:06:50.948] fs.protected_symlinks = 1 [2025-09-23 15:06:50.948] kernel.modules_disabled = 1 [2025-09-23 15:06:51.156] [2025-09-23 15:06:51.156] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:06:52.332] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:07:00.188] SBL1:1210.0.1.0 [2025-09-23 15:07:00.220] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:07:01.802] SBL2:1210.0.1.0 [2025-09-23 15:07:01.834] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:07:01.930] j-A [2025-09-23 15:07:09.285] The R5 Autosar Classic is running [2025-09-23 15:07:09.310] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:07:09.310] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:07:09.917] INIT: version 2.96 booting [2025-09-23 15:07:10.028] INIT: Entering runlevel: 5 [2025-09-23 15:07:10.189] mtd28 attached [2025-09-23 15:07:10.189] mtd24 attached [2025-09-23 15:07:10.205] mtd32 attached [2025-09-23 15:07:10.253] RTNETLINK answers: File exists [2025-09-23 15:07:10.321] ubi1:textures is mounted. [2025-09-23 15:07:10.321] ubi0:animations is mounted. [2025-09-23 15:07:10.321] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:07:10.321] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:07:10.321] ubi2:dml_code is mounted. [2025-09-23 15:07:10.321] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:07:10.321] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:07:10.321] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:07:10.321] data.LB_FadeInType0=100 [2025-09-23 15:07:10.321] data.CHLH_FadeInType0=0 [2025-09-23 15:07:10.321] data.WU_FadeInDelay=0 [2025-09-23 15:07:10.321] max_time_out=0 [2025-09-23 15:07:10.321] No splash screen [2025-09-23 15:07:10.321] stop dss Done [2025-09-23 15:07:10.368] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:07:10.401] /dev/mem opened. [2025-09-23 15:07:10.401] Memory mapped at address 0xffff82e61000. [2025-09-23 15:07:10.401] Read at address 0x00600018 (0xffff82e61018): 0x00000000 [2025-09-23 15:07:10.401] Write at address 0x00600018 (0xffff82e61018): 0x00400040, readback 0x00400040 [2025-09-23 15:07:10.401] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:07:10.481] Loaded PowerVR consumer services. [2025-09-23 15:07:10.639] 512+0 records in [2025-09-23 15:07:10.639] 512+0 records out [2025-09-23 15:07:10.639] Waiting data available... [2025-09-23 15:07:10.655] Starting syslogd/klogd: done [2025-09-23 15:07:10.671] DML Start [2025-09-23 15:07:10.848] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:07:11.103] DML res1: 0 [2025-09-23 15:07:11.476] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:07:11.476] Read Success [2025-09-23 15:07:11.476] Verifying certificate... [2025-09-23 15:07:11.748] Verified OK [2025-09-23 15:07:11.764] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:07:13.394] Verified OK [2025-09-23 15:07:13.395] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:07:13.976] Verified OK [2025-09-23 15:07:13.976] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:07:16.806] fs.protected_hardlinks = 1 [2025-09-23 15:07:16.822] fs.protected_symlinks = 1 [2025-09-23 15:07:16.822] kernel.modules_disabled = 1 [2025-09-23 15:07:17.014] [2025-09-23 15:07:17.014] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:07:18.178] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:07:26.034] SBL1:1210.0.1.0 [2025-09-23 15:07:26.065] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:07:27.648] SBL2:1210.0.1.0 [2025-09-23 15:07:27.680] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:07:27.791] j-A [2025-09-23 15:07:35.162] The R5 Autosar Classic is running [2025-09-23 15:07:35.162] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:07:35.162] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:07:35.770] INIT: version 2.96 booting [2025-09-23 15:07:35.882] INIT: Entering runlevel: 5 [2025-09-23 15:07:36.026] mtd24 attached [2025-09-23 15:07:36.041] mtd28 attached [2025-09-23 15:07:36.057] mtd32 attached [2025-09-23 15:07:36.159] RTNETLINK answers: File exists [2025-09-23 15:07:36.159] ubi1:animations is mounted. [2025-09-23 15:07:36.159] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:07:36.159] ubi0:textures is mounted. [2025-09-23 15:07:36.159] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:07:36.159] ubi2:dml_code is mounted. [2025-09-23 15:07:36.159] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:07:36.159] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:07:36.159] data.LB_FadeInType0=100 [2025-09-23 15:07:36.159] data.CHLH_FadeInType0=0 [2025-09-23 15:07:36.159] data.WU_FadeInDelay=0 [2025-09-23 15:07:36.159] max_time_out=0 [2025-09-23 15:07:36.159] No splash screen [2025-09-23 15:07:36.159] stop dss Done [2025-09-23 15:07:36.159] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:07:36.226] /dev/mem opened. [2025-09-23 15:07:36.226] Memory mapped at address 0xffffa69b8000. [2025-09-23 15:07:36.226] Read at address 0x00600018 (0xffffa69b8018): 0x00000000 [2025-09-23 15:07:36.226] Write at address 0x00600018 (0xffffa69b8018): 0x00400040, readback 0x00400040 [2025-09-23 15:07:36.275] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:07:36.307] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:07:36.451] Loaded PowerVR consumer services. [2025-09-23 15:07:36.499] 512+0 records in [2025-09-23 15:07:36.499] 512+0 records out [2025-09-23 15:07:36.514] Waiting data available... [2025-09-23 15:07:36.530] Starting syslogd/klogd: done [2025-09-23 15:07:36.546] DML Start [2025-09-23 15:07:36.770] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:07:36.978] DML res1: 0 [2025-09-23 15:07:37.383] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:07:37.383] Read Success [2025-09-23 15:07:37.383] Verifying certificate... [2025-09-23 15:07:37.591] Verified OK [2025-09-23 15:07:37.606] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:07:39.376] Verified OK [2025-09-23 15:07:39.376] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:07:39.962] Verified OK [2025-09-23 15:07:39.962] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:07:42.425] fs.protected_hardlinks = 1 [2025-09-23 15:07:42.441] fs.protected_symlinks = 1 [2025-09-23 15:07:42.457] kernel.modules_disabled = 1 [2025-09-23 15:07:42.649] [2025-09-23 15:07:42.649] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:07:44.067] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:07:52.202] SBL1:1210.0.1.0 [2025-09-23 15:07:52.203] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:07:53.633] SBL2:1210.0.1.0 [2025-09-23 15:07:53.665] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:07:53.777] j-A [2025-09-23 15:08:01.115] The R5 Autosar Classic is running [2025-09-23 15:08:01.146] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:08:01.146] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:08:01.754] INIT: version 2.96 booting [2025-09-23 15:08:01.866] INIT: Entering runlevel: 5 [2025-09-23 15:08:02.010] mtd28 attached [2025-09-23 15:08:02.026] mtd32 attached [2025-09-23 15:08:02.042] mtd24 attached [2025-09-23 15:08:02.089] RTNETLINK answers: File exists [2025-09-23 15:08:02.089] ubi0:animations is mounted. [2025-09-23 15:08:02.128] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:08:02.128] ubi1:dml_code is mounted. [2025-09-23 15:08:02.128] ubi2:textures is mounted. [2025-09-23 15:08:02.128] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:08:02.128] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:08:02.128] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:08:02.128] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:08:02.151] data.LB_FadeInType0=100 [2025-09-23 15:08:02.151] data.CHLH_FadeInType0=0 [2025-09-23 15:08:02.151] data.WU_FadeInDelay=0 [2025-09-23 15:08:02.151] max_time_out=0 [2025-09-23 15:08:02.151] No splash screen [2025-09-23 15:08:02.151] stop dss Done [2025-09-23 15:08:02.197] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:08:02.197] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:08:02.197] /dev/mem opened. [2025-09-23 15:08:02.229] Memory mapped at address 0xffffb5b67000. [2025-09-23 15:08:02.229] Read at address 0x00600018 (0xffffb5b67018): 0x00000000 [2025-09-23 15:08:02.229] Write at address 0x00600018 (0xffffb5b67018): 0x00400040, readback 0x00400040 [2025-09-23 15:08:02.421] Loaded PowerVR consumer services. [2025-09-23 15:08:02.436] 512+0 records in [2025-09-23 15:08:02.436] 512+0 records out [2025-09-23 15:08:02.484] Starting syslogd/klogd: Waiting data available... [2025-09-23 15:08:02.500] done [2025-09-23 15:08:02.500] DML Start [2025-09-23 15:08:02.676] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:08:02.900] DML res1: 0 [2025-09-23 15:08:03.396] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:08:03.396] Read Success [2025-09-23 15:08:03.412] Verifying certificate... [2025-09-23 15:08:03.652] Verified OK [2025-09-23 15:08:03.668] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:08:05.372] Verified OK [2025-09-23 15:08:05.372] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:08:05.980] Verified OK [2025-09-23 15:08:05.980] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:08:08.570] fs.protected_hardlinks = 1 [2025-09-23 15:08:08.570] fs.protected_symlinks = 1 [2025-09-23 15:08:08.586] kernel.modules_disabled = 1 [2025-09-23 15:08:08.793] [2025-09-23 15:08:08.793] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:08:09.987] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:08:18.054] SBL1:1210.0.1.0 [2025-09-23 15:08:18.102] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:08:19.668] SBL2:1210.0.1.0 [2025-09-23 15:08:19.716] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:08:19.812] j-A [2025-09-23 15:08:27.165] The R5 Autosar Classic is running [2025-09-23 15:08:27.188] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:08:27.188] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:08:27.796] INIT: version 2.96 booting [2025-09-23 15:08:27.907] INIT: Entering runlevel: 5 [2025-09-23 15:08:28.068] mtd24 attached [2025-09-23 15:08:28.084] mtd32 attached [2025-09-23 15:08:28.100] mtd28 attached [2025-09-23 15:08:28.228] ubi0:textures is mounted. [2025-09-23 15:08:28.229] RTNETLINK answers: File exists [2025-09-23 15:08:28.229] ubi1:dml_code is mounted. [2025-09-23 15:08:28.229] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:08:28.229] ubi2:animations is mounted. [2025-09-23 15:08:28.229] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:08:28.229] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:08:28.229] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:08:28.229] data.LB_FadeInType0=100 [2025-09-23 15:08:28.229] data.CHLH_FadeInType0=0 [2025-09-23 15:08:28.229] data.WU_FadeInDelay=0 [2025-09-23 15:08:28.229] max_time_out=0 [2025-09-23 15:08:28.229] No splash screen [2025-09-23 15:08:28.229] stop dss Done [2025-09-23 15:08:28.229] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:08:28.259] /dev/mem opened. [2025-09-23 15:08:28.259] Memory mapped at address 0xffffa6b7f000. [2025-09-23 15:08:28.259] Read at address 0x00600018 (0xffffa6b7f018): 0x00000000 [2025-09-23 15:08:28.259] Write at address 0x00600018 (0xffffa6b7f018): 0x00400040, readback 0x00400040 [2025-09-23 15:08:28.259] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:08:28.275] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:08:28.372] Loaded PowerVR consumer services. [2025-09-23 15:08:28.526] Waiting data available... [2025-09-23 15:08:28.526] 512+0 records in [2025-09-23 15:08:28.526] 512+0 records out [2025-09-23 15:08:28.557] Starting syslogd/klogd: done [2025-09-23 15:08:28.573] DML Start [2025-09-23 15:08:28.765] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:08:28.974] DML res1: 0 [2025-09-23 15:08:29.466] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:08:29.466] Read Success [2025-09-23 15:08:29.466] Verifying certificate... [2025-09-23 15:08:29.705] Verified OK [2025-09-23 15:08:29.721] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:08:31.384] Verified OK [2025-09-23 15:08:31.384] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:08:31.943] Verified OK [2025-09-23 15:08:31.943] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:08:34.582] fs.protected_hardlinks = 1 [2025-09-23 15:08:34.582] fs.protected_symlinks = 1 [2025-09-23 15:08:34.598] kernel.modules_disabled = 1 [2025-09-23 15:08:34.789] [2025-09-23 15:08:34.789] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:08:36.028] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:08:43.844] SBL1:1210.0.1.0 [2025-09-23 15:08:43.876] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:08:45.458] SBL2:1210.0.1.0 [2025-09-23 15:08:45.490] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:08:45.602] j-A [2025-09-23 15:08:52.973] The R5 Autosar Classic is running [2025-09-23 15:08:52.973] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:08:52.973] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:08:53.581] INIT: version 2.96 booting [2025-09-23 15:08:53.693] INIT: Entering runlevel: 5 [2025-09-23 15:08:54.003] mtd32 attached [2025-09-23 15:08:54.003] mtd24 attached [2025-09-23 15:08:54.003] mtd28 attached [2025-09-23 15:08:54.003] RTNETLINK answers: File exists [2025-09-23 15:08:54.003] ubi1:textures is mounted. [2025-09-23 15:08:54.003] ubi0:dml_code is mounted. [2025-09-23 15:08:54.003] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:08:54.003] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:08:54.003] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:08:54.003] ubi2:animations is mounted. [2025-09-23 15:08:54.003] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:08:54.003] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:08:54.003] data.LB_FadeInType0=100 [2025-09-23 15:08:54.003] data.CHLH_FadeInType0=0 [2025-09-23 15:08:54.003] data.WU_FadeInDelay=0 [2025-09-23 15:08:54.003] max_time_out=0 [2025-09-23 15:08:54.003] No splash screen [2025-09-23 15:08:54.003] stop dss Done [2025-09-23 15:08:54.017] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:08:54.017] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:08:54.033] /dev/mem opened. [2025-09-23 15:08:54.033] Memory mapped at address 0xffff7f93e000. [2025-09-23 15:08:54.059] Read at address 0x00600018 (0xffff7f93e018): 0x00000000 [2025-09-23 15:08:54.059] Write at address 0x00600018 (0xffff7f93e018): 0x00400040, readback 0x00400040 [2025-09-23 15:08:54.219] Loaded PowerVR consumer services. [2025-09-23 15:08:54.314] Waiting data available... [2025-09-23 15:08:54.314] 512+0 records in [2025-09-23 15:08:54.314] 512+0 records out [2025-09-23 15:08:54.346] Starting syslogd/klogd: done [2025-09-23 15:08:54.362] DML Start [2025-09-23 15:08:54.554] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:08:54.794] DML res1: 0 [2025-09-23 15:08:55.215] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:08:55.215] Read Success [2025-09-23 15:08:55.215] Verifying certificate... [2025-09-23 15:08:55.439] Verified OK [2025-09-23 15:08:55.455] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:08:57.203] Verified OK [2025-09-23 15:08:57.203] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:08:57.811] Verified OK [2025-09-23 15:08:57.832] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:09:00.470] fs.protected_hardlinks = 1 [2025-09-23 15:09:00.470] fs.protected_symlinks = 1 [2025-09-23 15:09:00.486] kernel.modules_disabled = 1 [2025-09-23 15:09:00.678] [2025-09-23 15:09:00.678] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:09:01.893] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:09:09.621] SBL1:1210.0.1.0 [2025-09-23 15:09:09.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:09:11.236] SBL2:1210.0.1.0 [2025-09-23 15:09:11.268] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:09:11.380] j-A [2025-09-23 15:09:18.752] The R5 Autosar Classic is running [2025-09-23 15:09:18.752] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:09:18.752] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:09:19.360] INIT: version 2.96 booting [2025-09-23 15:09:19.471] INIT: Entering runlevel: 5 [2025-09-23 15:09:19.616] mtd24 attached [2025-09-23 15:09:19.631] mtd28 attached [2025-09-23 15:09:19.647] mtd32 attached [2025-09-23 15:09:19.738] ubi0:textures is mounted. [2025-09-23 15:09:19.739] RTNETLINK answers: File exists [2025-09-23 15:09:19.739] ubi1:animations is mounted. [2025-09-23 15:09:19.750] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:09:19.750] ubi2:dml_code is mounted. [2025-09-23 15:09:19.750] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:09:19.750] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:09:19.750] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:09:19.750] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:09:19.750] data.LB_FadeInType0=100 [2025-09-23 15:09:19.750] data.CHLH_FadeInType0=0 [2025-09-23 15:09:19.750] data.WU_FadeInDelay=0 [2025-09-23 15:09:19.750] max_time_out=0 [2025-09-23 15:09:19.750] No splash screen [2025-09-23 15:09:19.750] stop dss Done [2025-09-23 15:09:19.783] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:09:19.822] /dev/mem opened. [2025-09-23 15:09:19.822] Memory mapped at address 0xffff96578000. [2025-09-23 15:09:19.822] Read at address 0x00600018 (0xffff96578018): 0x00000000 [2025-09-23 15:09:19.822] Write at address 0x00600018 (0xffff96578018): 0x00400040, readback 0x00400040 [2025-09-23 15:09:19.822] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:09:19.917] Loaded PowerVR consumer services. [2025-09-23 15:09:20.074] 512+0 records in [2025-09-23 15:09:20.074] 512+0 records out [2025-09-23 15:09:20.074] Waiting data available... [2025-09-23 15:09:20.106] Starting syslogd/klogd: done [2025-09-23 15:09:20.123] DML Start [2025-09-23 15:09:20.299] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:09:20.522] DML res1: 0 [2025-09-23 15:09:20.952] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:09:20.952] Read Success [2025-09-23 15:09:20.952] Verifying certificate... [2025-09-23 15:09:21.269] Verified OK [2025-09-23 15:09:21.269] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:09:22.852] Verified OK [2025-09-23 15:09:22.852] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:09:23.418] Verified OK [2025-09-23 15:09:23.418] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:09:25.944] fs.protected_hardlinks = 1 [2025-09-23 15:09:25.979] fs.protected_symlinks = 1 [2025-09-23 15:09:25.980] kernel.modules_disabled = 1 [2025-09-23 15:09:26.153] [2025-09-23 15:09:26.153] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:09:27.616] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:09:35.418] SBL1:1210.0.1.0 [2025-09-23 15:09:35.466] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:09:37.033] SBL2:1210.0.1.0 [2025-09-23 15:09:37.065] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:09:37.176] j-A [2025-09-23 15:09:44.531] The R5 Autosar Classic is running [2025-09-23 15:09:44.531] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:09:44.557] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:09:45.159] INIT: version 2.96 booting [2025-09-23 15:09:45.271] INIT: Entering runlevel: 5 [2025-09-23 15:09:45.432] mtd24 attached [2025-09-23 15:09:45.555] mtd32 attached [2025-09-23 15:09:45.555] mtd28 attached [2025-09-23 15:09:45.556] ubi0:textures is mounted. [2025-09-23 15:09:45.556] ubi1:dml_code is mounted. [2025-09-23 15:09:45.561] RTNETLINK answers: File exists [2025-09-23 15:09:45.561] ubi2:animations is mounted. [2025-09-23 15:09:45.561] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:09:45.561] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:09:45.561] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:09:45.561] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:09:45.561] data.LB_FadeInType0=100 [2025-09-23 15:09:45.561] data.CHLH_FadeInType0=0 [2025-09-23 15:09:45.561] data.WU_FadeInDelay=0 [2025-09-23 15:09:45.561] max_time_out=0 [2025-09-23 15:09:45.561] No splash screen [2025-09-23 15:09:45.561] stop dss Done [2025-09-23 15:09:45.561] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:09:45.610] /dev/mem opened. [2025-09-23 15:09:45.610] Memory mapped at address 0xffff8d5b0000. [2025-09-23 15:09:45.636] Read at address 0x00600018 (0xffff8d5b0018): 0x00000000 [2025-09-23 15:09:45.636] Write at address 0x00600018 (0xffff8d5b0018): 0x00400040, readback 0x00400040 [2025-09-23 15:09:45.667] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:09:45.684] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:09:45.827] Loaded PowerVR consumer services. [2025-09-23 15:09:45.875] 512+0 records in [2025-09-23 15:09:45.875] 512+0 records out [2025-09-23 15:09:45.891] Waiting data available... [2025-09-23 15:09:45.907] Starting syslogd/klogd: done [2025-09-23 15:09:45.923] DML Start [2025-09-23 15:09:46.131] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:09:46.355] DML res1: 0 [2025-09-23 15:09:46.754] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:09:47.101] Read Success [2025-09-23 15:09:47.101] Verifying certificate... [2025-09-23 15:09:47.102] Verified OK [2025-09-23 15:09:47.102] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:09:48.755] Verified OK [2025-09-23 15:09:48.755] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:09:49.419] Verified OK [2025-09-23 15:09:49.419] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:09:52.076] fs.protected_hardlinks = 1 [2025-09-23 15:09:52.077] fs.protected_symlinks = 1 [2025-09-23 15:09:52.077] kernel.modules_disabled = 1 [2025-09-23 15:09:52.282] [2025-09-23 15:09:52.282] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:09:53.438] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:10:01.219] SBL1:1210.0.1.0 [2025-09-23 15:10:01.267] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:10:02.834] SBL2:1210.0.1.0 [2025-09-23 15:10:02.866] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:10:02.979] j-A [2025-09-23 15:10:10.353] The R5 Autosar Classic is running [2025-09-23 15:10:10.353] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:10:10.353] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:10:10.961] INIT: version 2.96 booting [2025-09-23 15:10:11.072] INIT: Entering runlevel: 5 [2025-09-23 15:10:11.232] mtd28 attached [2025-09-23 15:10:11.232] mtd24 attached [2025-09-23 15:10:11.248] mtd32 attached [2025-09-23 15:10:11.296] RTNETLINK answers: File exists [2025-09-23 15:10:11.296] ubi0:animations is mounted. [2025-09-23 15:10:11.387] ubi1:textures is mounted. [2025-09-23 15:10:11.387] ubi2:dml_code is mounted. [2025-09-23 15:10:11.387] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:10:11.387] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:10:11.387] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:10:11.388] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:10:11.388] data.LB_FadeInType0=100 [2025-09-23 15:10:11.388] data.CHLH_FadeInType0=0 [2025-09-23 15:10:11.388] data.WU_FadeInDelay=0 [2025-09-23 15:10:11.388] max_time_out=0 [2025-09-23 15:10:11.388] No splash screen [2025-09-23 15:10:11.388] stop dss Done [2025-09-23 15:10:11.388] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:10:11.399] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:10:11.434] /dev/mem opened. [2025-09-23 15:10:11.434] Memory mapped at address 0xffff9bc67000. [2025-09-23 15:10:11.434] Read at address 0x00600018 (0xffff9bc67018): 0x00000000 [2025-09-23 15:10:11.434] Write at address 0x00600018 (0xffff9bc67018): 0x00400040, readback 0x00400040 [2025-09-23 15:10:11.434] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:10:11.626] Loaded PowerVR consumer services. [2025-09-23 15:10:11.673] Waiting data available... [2025-09-23 15:10:11.690] 512+0 records in [2025-09-23 15:10:11.690] 512+0 records out [2025-09-23 15:10:11.705] Starting syslogd/klogd: done [2025-09-23 15:10:11.737] DML Start [2025-09-23 15:10:11.914] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:10:12.153] DML res1: 0 [2025-09-23 15:10:12.581] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:10:12.581] Read Success [2025-09-23 15:10:12.581] Verifying certificate... [2025-09-23 15:10:12.920] Verified OK [2025-09-23 15:10:12.920] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:10:14.556] Verified OK [2025-09-23 15:10:14.556] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:10:15.176] Verified OK [2025-09-23 15:10:15.176] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:10:17.766] fs.protected_hardlinks = 1 [2025-09-23 15:10:17.766] fs.protected_symlinks = 1 [2025-09-23 15:10:17.801] kernel.modules_disabled = 1 [2025-09-23 15:10:17.973] [2025-09-23 15:10:17.973] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:10:19.218] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:10:27.003] SBL1:1210.0.1.0 [2025-09-23 15:10:27.051] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:10:28.618] SBL2:1210.0.1.0 [2025-09-23 15:10:28.650] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:10:28.762] j-A [2025-09-23 15:10:36.136] The R5 Autosar Classic is running [2025-09-23 15:10:36.136] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:10:36.136] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:10:36.744] INIT: version 2.96 booting [2025-09-23 15:10:36.840] INIT: Entering runlevel: 5 [2025-09-23 15:10:37.000] mtd28 attached [2025-09-23 15:10:37.017] mtd24 attached [2025-09-23 15:10:37.032] mtd32 attached [2025-09-23 15:10:37.080] ubi0:animations is mounted. [2025-09-23 15:10:37.080] RTNETLINK answers: File exists [2025-09-23 15:10:37.134] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:10:37.134] ubi1:textures is mounted. [2025-09-23 15:10:37.134] ubi2:dml_code is mounted. [2025-09-23 15:10:37.134] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:10:37.134] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:10:37.134] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:10:37.134] data.LB_FadeInType0=100 [2025-09-23 15:10:37.134] data.CHLH_FadeInType0=0 [2025-09-23 15:10:37.134] data.WU_FadeInDelay=0 [2025-09-23 15:10:37.134] max_time_out=0 [2025-09-23 15:10:37.134] No splash screen [2025-09-23 15:10:37.134] stop dss Done [2025-09-23 15:10:37.134] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:10:37.212] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:10:37.212] /dev/mem opened. [2025-09-23 15:10:37.212] Memory mapped at address 0xffffba2db000. [2025-09-23 15:10:37.212] Read at address 0x00600018 (0xffffba2db018): 0x00000000 [2025-09-23 15:10:37.212] Write at address 0x00600018 (0xffffba2db018): 0x00400040, readback 0x00400040 [2025-09-23 15:10:37.212] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:10:37.420] Loaded PowerVR consumer services. [2025-09-23 15:10:37.452] 512+0 records in [2025-09-23 15:10:37.452] 512+0 records out [2025-09-23 15:10:37.468] Waiting data available... [2025-09-23 15:10:37.500] Starting syslogd/klogd: done [2025-09-23 15:10:37.532] DML Start [2025-09-23 15:10:37.692] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:10:37.947] DML res1: 0 [2025-09-23 15:10:38.347] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:10:38.368] Read Success [2025-09-23 15:10:38.368] Verifying certificate... [2025-09-23 15:10:38.640] Verified OK [2025-09-23 15:10:38.672] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:10:40.334] Verified OK [2025-09-23 15:10:40.334] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:10:40.986] Verified OK [2025-09-23 15:10:40.986] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:10:43.640] fs.protected_hardlinks = 1 [2025-09-23 15:10:43.671] fs.protected_symlinks = 1 [2025-09-23 15:10:43.671] kernel.modules_disabled = 1 [2025-09-23 15:10:43.862] [2025-09-23 15:10:43.879] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:10:45.045] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:10:52.772] SBL1:1210.0.1.0 [2025-09-23 15:10:52.820] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:10:54.388] SBL2:1210.0.1.0 [2025-09-23 15:10:54.489] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:10:54.531] j-A [2025-09-23 15:11:01.886] The R5 Autosar Classic is running [2025-09-23 15:11:01.908] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:11:01.908] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:11:02.515] INIT: version 2.96 booting [2025-09-23 15:11:02.626] INIT: Entering runlevel: 5 [2025-09-23 15:11:02.787] mtd28 attached [2025-09-23 15:11:02.787] mtd24 attached [2025-09-23 15:11:02.803] mtd32 attached [2025-09-23 15:11:02.851] ubi0:animations is mounted. [2025-09-23 15:11:02.917] RTNETLINK answers: File exists [2025-09-23 15:11:02.917] ubi1:textures is mounted. [2025-09-23 15:11:02.917] ubi2:dml_code is mounted. [2025-09-23 15:11:02.917] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:11:02.917] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:11:02.917] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:11:02.917] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:11:02.917] data.LB_FadeInType0=100 [2025-09-23 15:11:02.917] data.CHLH_FadeInType0=0 [2025-09-23 15:11:02.917] data.WU_FadeInDelay=0 [2025-09-23 15:11:02.917] max_time_out=0 [2025-09-23 15:11:02.917] No splash screen [2025-09-23 15:11:02.917] stop dss Done [2025-09-23 15:11:02.917] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:11:02.981] /dev/mem opened. [2025-09-23 15:11:02.981] Memory mapped at address 0xffff99c90000. [2025-09-23 15:11:02.981] Read at address 0x00600018 (0xffff99c90018): 0x00000000 [2025-09-23 15:11:02.981] Write at address 0x00600018 (0xffff99c90018): 0x00400040, readback 0x00400040 [2025-09-23 15:11:03.010] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:11:03.010] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:11:03.105] Loaded PowerVR consumer services. [2025-09-23 15:11:03.233] Waiting data available... [2025-09-23 15:11:03.233] 512+0 records in [2025-09-23 15:11:03.249] 512+0 records out [2025-09-23 15:11:03.281] Starting syslogd/klogd: done [2025-09-23 15:11:03.297] DML Start [2025-09-23 15:11:03.490] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:11:03.697] DML res1: 0 [2025-09-23 15:11:04.145] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:11:04.166] Read Success [2025-09-23 15:11:04.166] Verifying certificate... [2025-09-23 15:11:04.405] Verified OK [2025-09-23 15:11:04.422] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:11:06.078] Verified OK [2025-09-23 15:11:06.078] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:11:06.676] Verified OK [2025-09-23 15:11:06.676] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:11:09.330] fs.protected_hardlinks = 1 [2025-09-23 15:11:09.346] fs.protected_symlinks = 1 [2025-09-23 15:11:09.346] kernel.modules_disabled = 1 [2025-09-23 15:11:09.539] [2025-09-23 15:11:09.539] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:11:10.821] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:11:18.553] SBL1:1210.0.1.0 [2025-09-23 15:11:18.601] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:11:20.167] SBL2:1210.0.1.0 [2025-09-23 15:11:20.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:11:20.311] j-A [2025-09-23 15:11:27.685] The R5 Autosar Classic is running [2025-09-23 15:11:27.685] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:11:27.685] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:11:28.293] INIT: version 2.96 booting [2025-09-23 15:11:28.405] INIT: Entering runlevel: 5 [2025-09-23 15:11:28.746] mtd32 attached [2025-09-23 15:11:28.746] mtd24 attached [2025-09-23 15:11:28.746] mtd28 attached [2025-09-23 15:11:28.746] RTNETLINK answers: File exists [2025-09-23 15:11:28.746] ubi1:textures is mounted. [2025-09-23 15:11:28.746] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:11:28.746] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:11:28.746] ubi2:animations is mounted. [2025-09-23 15:11:28.746] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:11:28.746] ubi0:dml_code is mounted. [2025-09-23 15:11:28.746] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:11:28.746] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:11:28.746] data.LB_FadeInType0=100 [2025-09-23 15:11:28.746] data.CHLH_FadeInType0=0 [2025-09-23 15:11:28.746] data.WU_FadeInDelay=0 [2025-09-23 15:11:28.746] max_time_out=0 [2025-09-23 15:11:28.746] No splash screen [2025-09-23 15:11:28.746] stop dss Done [2025-09-23 15:11:28.746] /dev/mem opened. [2025-09-23 15:11:28.773] Memory mapped at address 0xffff9d8b2000. [2025-09-23 15:11:28.773] Read at address 0x00600018 (0xffff9d8b2018): 0x00000000 [2025-09-23 15:11:28.773] Write at address 0x00600018 (0xffff9d8b2018): 0x00400040, readback 0x00400040 [2025-09-23 15:11:28.773] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:11:28.773] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:11:28.901] Loaded PowerVR consumer services. [2025-09-23 15:11:29.013] 512+0 records in [2025-09-23 15:11:29.013] 512+0 records out [2025-09-23 15:11:29.029] Waiting data available... [2025-09-23 15:11:29.061] Starting syslogd/klogd: done [2025-09-23 15:11:29.077] DML Start [2025-09-23 15:11:29.236] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:11:29.476] DML res1: 0 [2025-09-23 15:11:29.965] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:11:29.965] Read Success [2025-09-23 15:11:29.965] Verifying certificate... [2025-09-23 15:11:30.189] Verified OK [2025-09-23 15:11:30.189] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:11:31.771] Verified OK [2025-09-23 15:11:31.794] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:11:32.396] Verified OK [2025-09-23 15:11:32.396] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:11:35.002] fs.protected_hardlinks = 1 [2025-09-23 15:11:35.033] fs.protected_symlinks = 1 [2025-09-23 15:11:35.033] kernel.modules_disabled = 1 [2025-09-23 15:11:35.208] [2025-09-23 15:11:35.208] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:11:36.607] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:11:44.369] SBL1:1210.0.1.0 [2025-09-23 15:11:44.417] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:11:45.983] SBL2:1210.0.1.0 [2025-09-23 15:11:46.015] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:11:46.128] j-A [2025-09-23 15:11:53.502] The R5 Autosar Classic is running [2025-09-23 15:11:53.502] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:11:53.502] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:11:54.110] INIT: version 2.96 booting [2025-09-23 15:11:54.221] INIT: Entering runlevel: 5 [2025-09-23 15:11:54.563] mtd24 attached [2025-09-23 15:11:54.563] mtd32 attached [2025-09-23 15:11:54.563] mtd28 attached [2025-09-23 15:11:54.563] ubi0:textures is mounted. [2025-09-23 15:11:54.563] RTNETLINK answers: File exists [2025-09-23 15:11:54.563] ubi2:animations is mounted. [2025-09-23 15:11:54.563] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:11:54.563] ubi1:dml_code is mounted. [2025-09-23 15:11:54.563] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:11:54.563] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:11:54.563] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:11:54.563] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:11:54.563] data.LB_FadeInType0=100 [2025-09-23 15:11:54.563] data.CHLH_FadeInType0=0 [2025-09-23 15:11:54.563] data.WU_FadeInDelay=0 [2025-09-23 15:11:54.563] max_time_out=0 [2025-09-23 15:11:54.563] No splash screen [2025-09-23 15:11:54.563] stop dss Done [2025-09-23 15:11:54.563] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:11:54.570] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:11:54.570] /dev/mem opened. [2025-09-23 15:11:54.570] Memory mapped at address 0xffff9649d000. [2025-09-23 15:11:54.570] Read at address 0x00600018 (0xffff9649d018): 0x00000000 [2025-09-23 15:11:54.570] Write at address 0x00600018 (0xffff9649d018): 0x00400040, readback 0x00400040 [2025-09-23 15:11:54.746] Loaded PowerVR consumer services. [2025-09-23 15:11:54.826] Waiting data available... [2025-09-23 15:11:54.842] 512+0 records in [2025-09-23 15:11:54.842] 512+0 records out [2025-09-23 15:11:54.891] Starting syslogd/klogd: done [2025-09-23 15:11:54.906] DML Start [2025-09-23 15:11:55.098] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:11:55.562] DML res1: 0 [2025-09-23 15:11:55.738] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:11:55.759] Read Success [2025-09-23 15:11:55.759] Verifying certificate... [2025-09-23 15:11:56.015] Verified OK [2025-09-23 15:11:56.030] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:11:57.780] Verified OK [2025-09-23 15:11:57.780] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:11:58.335] Verified OK [2025-09-23 15:11:58.335] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:12:00.764] fs.protected_hardlinks = 1 [2025-09-23 15:12:00.764] fs.protected_symlinks = 1 [2025-09-23 15:12:00.780] kernel.modules_disabled = 1 [2025-09-23 15:12:00.988] [2025-09-23 15:12:00.988] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:12:02.437] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:12:10.158] SBL1:1210.0.1.0 [2025-09-23 15:12:10.189] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:12:11.772] SBL2:1210.0.1.0 [2025-09-23 15:12:11.805] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 15:12:11.916] j-A [2025-09-23 15:12:19.256] The R5 Autosar Classic is running [2025-09-23 15:12:19.287] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:12:19.287] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:12:19.895] INIT: version 2.96 booting [2025-09-23 15:12:20.007] INIT: Entering runlevel: 5 [2025-09-23 15:12:20.208] mtd32 attached [2025-09-23 15:12:20.208] mtd24 attached [2025-09-23 15:12:20.208] mtd28 attached [2025-09-23 15:12:20.231] ubi1:textures is mounted. [2025-09-23 15:12:20.231] RTNETLINK answers: File exists [2025-09-23 15:12:20.290] ubi0:dml_code is mounted. [2025-09-23 15:12:20.290] ubi2:animations is mounted. [2025-09-23 15:12:20.290] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:12:20.290] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:12:20.290] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:12:20.290] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:12:20.290] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:12:20.290] data.LB_FadeInType0=100 [2025-09-23 15:12:20.290] data.CHLH_FadeInType0=0 [2025-09-23 15:12:20.290] data.WU_FadeInDelay=0 [2025-09-23 15:12:20.290] max_time_out=0 [2025-09-23 15:12:20.290] No splash screen [2025-09-23 15:12:20.290] stop dss Done [2025-09-23 15:12:20.369] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:12:20.369] /dev/mem opened. [2025-09-23 15:12:20.369] Memory mapped at address 0xffff901e3000. [2025-09-23 15:12:20.369] Read at address 0x00600018 (0xffff901e3018): 0x00000000 [2025-09-23 15:12:20.369] Write at address 0x00600018 (0xffff901e3018): 0x00400040, readback 0x00400040 [2025-09-23 15:12:20.369] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:12:20.481] Loaded PowerVR consumer services. [2025-09-23 15:12:20.621] Waiting data available... [2025-09-23 15:12:20.621] 512+0 records in [2025-09-23 15:12:20.621] 512+0 records out [2025-09-23 15:12:20.637] Starting syslogd/klogd: done [2025-09-23 15:12:20.653] DML Start [2025-09-23 15:12:20.830] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:12:21.037] DML res1: 0 [2025-09-23 15:12:21.494] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:12:21.494] Read Success [2025-09-23 15:12:21.494] Verifying certificate... [2025-09-23 15:12:21.798] Verified OK [2025-09-23 15:12:21.814] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:12:23.296] Verified OK [2025-09-23 15:12:23.296] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:12:23.935] Verified OK [2025-09-23 15:12:23.935] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:12:26.735] fs.protected_hardlinks = 1 [2025-09-23 15:12:26.735] fs.protected_symlinks = 1 [2025-09-23 15:12:26.736] kernel.modules_disabled = 1 [2025-09-23 15:12:26.909] [2025-09-23 15:12:26.909] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:12:28.159] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:12:35.961] SBL1:1210.0.1.0 [2025-09-23 15:12:36.009] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:12:37.575] SBL2:1210.0.1.0 [2025-09-23 15:12:37.618] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:12:37.720] j-A [2025-09-23 15:12:45.076] The R5 Autosar Classic is running [2025-09-23 15:12:45.076] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:12:45.097] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:12:45.705] INIT: version 2.96 booting [2025-09-23 15:12:45.816] INIT: Entering runlevel: 5 [2025-09-23 15:12:45.976] mtd24 attached [2025-09-23 15:12:45.976] mtd32 attached [2025-09-23 15:12:45.992] mtd28 attached [2025-09-23 15:12:46.040] ubi0:textures is mounted. [2025-09-23 15:12:46.147] RTNETLINK answers: File exists [2025-09-23 15:12:46.147] ubi1:dml_code is mounted. [2025-09-23 15:12:46.147] ubi2:animations is mounted. [2025-09-23 15:12:46.147] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:12:46.147] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:12:46.147] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:12:46.147] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:12:46.147] data.LB_FadeInType0=100 [2025-09-23 15:12:46.147] data.CHLH_FadeInType0=0 [2025-09-23 15:12:46.147] data.WU_FadeInDelay=0 [2025-09-23 15:12:46.147] max_time_out=0 [2025-09-23 15:12:46.147] No splash screen [2025-09-23 15:12:46.147] stop dss Done [2025-09-23 15:12:46.147] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:12:46.180] /dev/mem opened. [2025-09-23 15:12:46.180] Memory mapped at address 0xffff90d6a000. [2025-09-23 15:12:46.180] Read at address 0x00600018 (0xffff90d6a018): 0x00000000 [2025-09-23 15:12:46.180] Write at address 0x00600018 (0xffff90d6a018): 0x00400040, readback 0x00400040 [2025-09-23 15:12:46.180] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:12:46.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:12:46.308] Loaded PowerVR consumer services. [2025-09-23 15:12:46.419] Waiting data available... [2025-09-23 15:12:46.436] 512+0 records in [2025-09-23 15:12:46.436] 512+0 records out [2025-09-23 15:12:46.484] Starting syslogd/klogd: done [2025-09-23 15:12:46.500] DML Start [2025-09-23 15:12:46.676] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:12:47.150] DML res1: 0 [2025-09-23 15:12:47.315] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:12:47.336] Read Success [2025-09-23 15:12:47.336] Verifying certificate... [2025-09-23 15:12:47.561] Verified OK [2025-09-23 15:12:47.576] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:12:49.255] Verified OK [2025-09-23 15:12:49.271] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:12:49.862] Verified OK [2025-09-23 15:12:49.862] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:12:52.420] fs.protected_hardlinks = 1 [2025-09-23 15:12:52.436] fs.protected_symlinks = 1 [2025-09-23 15:12:52.436] kernel.modules_disabled = 1 [2025-09-23 15:12:52.644] [2025-09-23 15:12:52.644] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:12:53.982] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:13:01.751] SBL1:1210.0.1.0 [2025-09-23 15:13:01.783] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:13:03.367] SBL2:1210.0.1.0 [2025-09-23 15:13:03.399] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:13:03.511] j-A [2025-09-23 15:13:10.882] The R5 Autosar Classic is running [2025-09-23 15:13:10.882] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:13:10.882] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:13:11.489] INIT: version 2.96 booting [2025-09-23 15:13:11.601] INIT: Entering runlevel: 5 [2025-09-23 15:13:11.761] mtd28 attached [2025-09-23 15:13:11.761] mtd24 attached [2025-09-23 15:13:11.809] mtd32 attached [2025-09-23 15:13:11.825] ubi1:textures is mounted. [2025-09-23 15:13:11.825] ubi0:animations is mounted. [2025-09-23 15:13:11.842] RTNETLINK answers: File exists [2025-09-23 15:13:11.873] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:13:11.873] ubi2:dml_code is mounted. [2025-09-23 15:13:11.873] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:13:11.873] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:13:11.873] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:13:11.902] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:13:11.902] data.LB_FadeInType0=100 [2025-09-23 15:13:11.902] data.CHLH_FadeInType0=0 [2025-09-23 15:13:11.902] data.WU_FadeInDelay=0 [2025-09-23 15:13:11.902] max_time_out=0 [2025-09-23 15:13:11.902] No splash screen [2025-09-23 15:13:11.902] stop dss Done [2025-09-23 15:13:11.965] /dev/mem opened. [2025-09-23 15:13:11.965] Memory mapped at address 0xffff8238f000. [2025-09-23 15:13:11.965] Read at address 0x00600018 (0xffff8238f018): 0x00000000 [2025-09-23 15:13:11.965] Write at address 0x00600018 (0xffff8238f018): 0x00400040, readback 0x00400040 [2025-09-23 15:13:11.982] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:13:11.997] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:13:12.077] Loaded PowerVR consumer services. [2025-09-23 15:13:12.231] Waiting data available... [2025-09-23 15:13:12.231] 512+0 records in [2025-09-23 15:13:12.231] 512+0 records out [2025-09-23 15:13:12.262] Starting syslogd/klogd: done [2025-09-23 15:13:12.278] DML Start [2025-09-23 15:13:12.455] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:13:12.679] DML res1: 0 [2025-09-23 15:13:13.156] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:13:13.156] Read Success [2025-09-23 15:13:13.156] Verifying certificate... [2025-09-23 15:13:13.413] Verified OK [2025-09-23 15:13:13.429] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:13:15.089] Verified OK [2025-09-23 15:13:15.089] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:13:15.665] Verified OK [2025-09-23 15:13:15.665] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:13:18.335] fs.protected_hardlinks = 1 [2025-09-23 15:13:18.351] fs.protected_symlinks = 1 [2025-09-23 15:13:18.351] kernel.modules_disabled = 1 [2025-09-23 15:13:18.543] [2025-09-23 15:13:18.543] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:13:19.787] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:13:27.542] SBL1:1210.0.1.0 [2025-09-23 15:13:27.590] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:13:29.157] SBL2:1210.0.1.0 [2025-09-23 15:13:29.205] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:13:29.301] j-A [2025-09-23 15:13:36.658] The R5 Autosar Classic is running [2025-09-23 15:13:36.678] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:13:36.678] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:13:37.286] INIT: version 2.96 booting [2025-09-23 15:13:37.706] INIT: Entering runlevel: 5 [2025-09-23 15:13:37.706] mtd28 attached [2025-09-23 15:13:37.706] mtd24 attached [2025-09-23 15:13:37.706] mtd32 attached [2025-09-23 15:13:37.706] ubi0:animations is mounted. [2025-09-23 15:13:37.706] RTNETLINK answers: File exists [2025-09-23 15:13:37.706] ubi1:textures is mounted. [2025-09-23 15:13:37.706] ubi2:dml_code is mounted. [2025-09-23 15:13:37.706] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:13:37.706] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:13:37.706] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:13:37.706] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:13:37.706] data.LB_FadeInType0=100 [2025-09-23 15:13:37.706] data.CHLH_FadeInType0=0 [2025-09-23 15:13:37.706] data.WU_FadeInDelay=0 [2025-09-23 15:13:37.706] max_time_out=0 [2025-09-23 15:13:37.706] No splash screen [2025-09-23 15:13:37.706] stop dss Done [2025-09-23 15:13:37.706] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:13:37.768] /dev/mem opened. [2025-09-23 15:13:37.768] Memory mapped at address 0xffffacf73000. [2025-09-23 15:13:37.768] Read at address 0x00600018 (0xffffacf73018): 0x00000000 [2025-09-23 15:13:37.768] Write at address 0x00600018 (0xffffacf73018): 0x00400040, readback 0x00400040 [2025-09-23 15:13:37.768] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:13:37.768] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:13:37.928] Loaded PowerVR consumer services. [2025-09-23 15:13:38.039] 512+0 records in [2025-09-23 15:13:38.039] 512+0 records out [2025-09-23 15:13:38.039] Waiting data available... [2025-09-23 15:13:38.070] Starting syslogd/klogd: done [2025-09-23 15:13:38.087] DML Start [2025-09-23 15:13:38.263] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:13:38.519] DML res1: 0 [2025-09-23 15:13:39.007] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:13:39.007] Read Success [2025-09-23 15:13:39.007] Verifying certificate... [2025-09-23 15:13:39.230] Verified OK [2025-09-23 15:13:39.246] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:13:40.830] Verified OK [2025-09-23 15:13:40.830] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:13:41.341] Verified OK [2025-09-23 15:13:41.341] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:13:44.172] fs.protected_hardlinks = 1 [2025-09-23 15:13:44.188] fs.protected_symlinks = 1 [2025-09-23 15:13:44.188] kernel.modules_disabled = 1 [2025-09-23 15:13:44.380] [2025-09-23 15:13:44.380] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:13:45.594] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:13:53.326] SBL1:1210.0.1.0 [2025-09-23 15:13:53.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:13:54.941] SBL2:1210.0.1.0 [2025-09-23 15:13:54.973] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:13:55.085] j-A [2025-09-23 15:14:02.461] The R5 Autosar Classic is running [2025-09-23 15:14:02.461] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:14:02.461] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:14:03.068] INIT: version 2.96 booting [2025-09-23 15:14:03.164] INIT: Entering runlevel: 5 [2025-09-23 15:14:03.324] mtd32 attached [2025-09-23 15:14:03.340] mtd28 attached [2025-09-23 15:14:03.356] mtd24 attached [2025-09-23 15:14:03.440] RTNETLINK answers: File exists [2025-09-23 15:14:03.440] ubi0:dml_code is mounted. [2025-09-23 15:14:03.440] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:14:03.440] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:14:03.440] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:14:03.440] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:14:03.440] ubi1:animations is mounted. [2025-09-23 15:14:03.440] ubi2:textures is mounted. [2025-09-23 15:14:03.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:14:03.478] data.LB_FadeInType0=100 [2025-09-23 15:14:03.478] data.CHLH_FadeInType0=0 [2025-09-23 15:14:03.478] data.WU_FadeInDelay=0 [2025-09-23 15:14:03.478] max_time_out=0 [2025-09-23 15:14:03.478] No splash screen [2025-09-23 15:14:03.478] stop dss Done [2025-09-23 15:14:03.493] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:14:03.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:14:03.525] /dev/mem opened. [2025-09-23 15:14:03.525] Memory mapped at address 0xffffa8391000. [2025-09-23 15:14:03.551] Read at address 0x00600018 (0xffffa8391018): 0x00000000 [2025-09-23 15:14:03.551] Write at address 0x00600018 (0xffffa8391018): 0x00400040, readback 0x00400040 [2025-09-23 15:14:03.695] Loaded PowerVR consumer services. [2025-09-23 15:14:03.775] 512+0 records in [2025-09-23 15:14:03.775] 512+0 records out [2025-09-23 15:14:03.807] Waiting data available... [2025-09-23 15:14:03.807] Starting syslogd/klogd: done [2025-09-23 15:14:03.823] DML Start [2025-09-23 15:14:04.014] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:14:04.271] DML res1: 0 [2025-09-23 15:14:04.638] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:14:04.654] Read Success [2025-09-23 15:14:04.654] Verifying certificate... [2025-09-23 15:14:04.895] Verified OK [2025-09-23 15:14:04.911] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:14:06.587] Verified OK [2025-09-23 15:14:06.587] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:14:07.238] Verified OK [2025-09-23 15:14:07.238] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:14:09.925] fs.protected_hardlinks = 1 [2025-09-23 15:14:09.925] fs.protected_symlinks = 1 [2025-09-23 15:14:09.941] kernel.modules_disabled = 1 [2025-09-23 15:14:10.117] [2025-09-23 15:14:10.117] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:14:11.331] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:14:19.143] SBL1:1210.0.1.0 [2025-09-23 15:14:19.175] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:14:20.759] SBL2:1210.0.1.0 [2025-09-23 15:14:20.792] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:14:20.902] j-A [2025-09-23 15:14:28.275] The R5 Autosar Classic is running [2025-09-23 15:14:28.275] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:14:28.275] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:14:28.883] INIT: version 2.96 booting [2025-09-23 15:14:28.994] INIT: Entering runlevel: 5 [2025-09-23 15:14:29.324] mtd24 attached [2025-09-23 15:14:29.324] mtd32 attached [2025-09-23 15:14:29.324] mtd28 attached [2025-09-23 15:14:29.324] ubi1:dml_code is mounted. [2025-09-23 15:14:29.324] ubi0:textures is mounted. [2025-09-23 15:14:29.324] RTNETLINK answers: File exists [2025-09-23 15:14:29.324] ubi2:animations is mounted. [2025-09-23 15:14:29.324] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:14:29.324] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:14:29.324] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:14:29.324] data.LB_FadeInType0=100 [2025-09-23 15:14:29.324] data.CHLH_FadeInType0=0 [2025-09-23 15:14:29.324] data.WU_FadeInDelay=0 [2025-09-23 15:14:29.324] max_time_out=0 [2025-09-23 15:14:29.324] No splash screen [2025-09-23 15:14:29.324] stop dss Done [2025-09-23 15:14:29.324] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:14:29.324] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:14:29.324] /dev/mem opened. [2025-09-23 15:14:29.324] Memory mapped at address 0xffff8477e000. [2025-09-23 15:14:29.344] Read at address 0x00600018 (0xffff8477e018): 0x00000000 [2025-09-23 15:14:29.344] Write at address 0x00600018 (0xffff8477e018): 0x00400040, readback 0x00400040 [2025-09-23 15:14:29.360] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:14:29.376] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:14:29.473] Loaded PowerVR consumer services. [2025-09-23 15:14:29.600] Waiting data available... [2025-09-23 15:14:29.600] 512+0 records in [2025-09-23 15:14:29.600] 512+0 records out [2025-09-23 15:14:29.648] Starting syslogd/klogd: done [2025-09-23 15:14:29.664] DML Start [2025-09-23 15:14:29.840] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:14:30.080] DML res1: 0 [2025-09-23 15:14:30.538] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:14:30.538] Read Success [2025-09-23 15:14:30.538] Verifying certificate... [2025-09-23 15:14:30.870] Verified OK [2025-09-23 15:14:30.870] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:14:32.502] Verified OK [2025-09-23 15:14:32.503] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:14:33.089] Verified OK [2025-09-23 15:14:33.089] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:14:35.536] fs.protected_hardlinks = 1 [2025-09-23 15:14:35.536] fs.protected_symlinks = 1 [2025-09-23 15:14:35.552] kernel.modules_disabled = 1 [2025-09-23 15:14:35.759] [2025-09-23 15:14:35.759] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:14:37.190] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:14:44.909] SBL1:1210.0.1.0 [2025-09-23 15:14:44.957] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:14:46.523] SBL2:1210.0.1.0 [2025-09-23 15:14:46.571] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:14:46.667] j-A [2025-09-23 15:14:54.022] The R5 Autosar Classic is running [2025-09-23 15:14:54.045] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:14:54.045] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:14:54.653] INIT: version 2.96 booting [2025-09-23 15:14:54.765] INIT: Entering runlevel: 5 [2025-09-23 15:14:54.909] mtd24 attached [2025-09-23 15:14:54.924] mtd28 attached [2025-09-23 15:14:54.956] mtd32 attached [2025-09-23 15:14:54.956] ubi0:textures is mounted. [2025-09-23 15:14:54.972] ubi1:animations is mounted. [2025-09-23 15:14:55.021] RTNETLINK answers: File exists [2025-09-23 15:14:55.021] ubi2:dml_code is mounted. [2025-09-23 15:14:55.021] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:14:55.021] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:14:55.021] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:14:55.021] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:14:55.055] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:14:55.055] data.LB_FadeInType0=100 [2025-09-23 15:14:55.055] data.CHLH_FadeInType0=0 [2025-09-23 15:14:55.055] data.WU_FadeInDelay=0 [2025-09-23 15:14:55.055] max_time_out=0 [2025-09-23 15:14:55.055] No splash screen [2025-09-23 15:14:55.055] stop dss Done [2025-09-23 15:14:55.134] /dev/mem opened. [2025-09-23 15:14:55.134] Memory mapped at address 0xffffb1680000. [2025-09-23 15:14:55.134] Read at address 0x00600018 (0xffffb1680018): 0x00000000 [2025-09-23 15:14:55.134] Write at address 0x00600018 (0xffffb1680018): 0x00400040, readback 0x00400040 [2025-09-23 15:14:55.134] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:14:55.134] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:14:55.294] Loaded PowerVR consumer services. [2025-09-23 15:14:55.404] Waiting data available... [2025-09-23 15:14:55.404] 512+0 records in [2025-09-23 15:14:55.404] 512+0 records out [2025-09-23 15:14:55.420] Starting syslogd/klogd: done [2025-09-23 15:14:55.435] DML Start [2025-09-23 15:14:55.579] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:14:55.835] DML res1: 0 [2025-09-23 15:14:56.299] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:14:56.299] Read Success [2025-09-23 15:14:56.315] Verifying certificate... [2025-09-23 15:14:56.554] Verified OK [2025-09-23 15:14:56.570] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:14:58.211] Verified OK [2025-09-23 15:14:58.211] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:14:58.866] Verified OK [2025-09-23 15:14:58.866] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:15:01.473] fs.protected_hardlinks = 1 [2025-09-23 15:15:01.489] fs.protected_symlinks = 1 [2025-09-23 15:15:01.489] kernel.modules_disabled = 1 [2025-09-23 15:15:01.680] [2025-09-23 15:15:01.680] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:15:02.942] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:15:10.726] SBL1:1210.0.1.0 [2025-09-23 15:15:10.774] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:15:12.341] SBL2:1210.0.1.0 [2025-09-23 15:15:12.389] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:15:12.485] j-A [2025-09-23 15:15:19.839] The R5 Autosar Classic is running [2025-09-23 15:15:19.865] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:15:19.865] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:15:20.472] INIT: version 2.96 booting [2025-09-23 15:15:20.584] INIT: Entering runlevel: 5 [2025-09-23 15:15:20.744] mtd28 attached [2025-09-23 15:15:20.744] mtd24 attached [2025-09-23 15:15:20.776] mtd32 attached [2025-09-23 15:15:20.792] ubi0:animations is mounted. [2025-09-23 15:15:20.883] ubi1:textures is mounted. [2025-09-23 15:15:20.884] RTNETLINK answers: File exists [2025-09-23 15:15:20.884] ubi2:dml_code is mounted. [2025-09-23 15:15:20.884] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:15:20.884] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:15:20.884] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:15:20.884] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:15:20.884] data.LB_FadeInType0=100 [2025-09-23 15:15:20.884] data.CHLH_FadeInType0=0 [2025-09-23 15:15:20.884] data.WU_FadeInDelay=0 [2025-09-23 15:15:20.884] max_time_out=0 [2025-09-23 15:15:20.884] No splash screen [2025-09-23 15:15:20.884] stop dss Done [2025-09-23 15:15:20.884] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:15:20.955] /dev/mem opened. [2025-09-23 15:15:20.955] Memory mapped at address 0xffff7fefd000. [2025-09-23 15:15:20.955] Read at address 0x00600018 (0xffff7fefd018): 0x00000000 [2025-09-23 15:15:20.955] Write at address 0x00600018 (0xffff7fefd018): 0x00400040, readback 0x00400040 [2025-09-23 15:15:20.955] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:15:20.955] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:15:21.051] Loaded PowerVR consumer services. [2025-09-23 15:15:21.207] Waiting data available... [2025-09-23 15:15:21.207] 512+0 records in [2025-09-23 15:15:21.207] 512+0 records out [2025-09-23 15:15:21.223] Starting syslogd/klogd: done [2025-09-23 15:15:21.240] DML Start [2025-09-23 15:15:21.399] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:15:21.624] DML res1: 0 [2025-09-23 15:15:22.103] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:15:22.124] Read Success [2025-09-23 15:15:22.124] Verifying certificate... [2025-09-23 15:15:22.379] Verified OK [2025-09-23 15:15:22.395] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:15:24.154] Verified OK [2025-09-23 15:15:24.175] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:15:24.703] Verified OK [2025-09-23 15:15:24.719] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:15:27.230] fs.protected_hardlinks = 1 [2025-09-23 15:15:27.230] fs.protected_symlinks = 1 [2025-09-23 15:15:27.246] kernel.modules_disabled = 1 [2025-09-23 15:15:27.437] [2025-09-23 15:15:27.437] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:15:28.749] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:15:36.555] SBL1:1210.0.1.0 [2025-09-23 15:15:36.587] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:15:38.171] SBL2:1210.0.1.0 [2025-09-23 15:15:38.208] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:15:38.314] j-A [2025-09-23 15:15:45.688] The R5 Autosar Classic is running [2025-09-23 15:15:45.688] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:15:45.688] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:15:46.295] INIT: version 2.96 booting [2025-09-23 15:15:46.407] INIT: Entering runlevel: 5 [2025-09-23 15:15:46.567] mtd28 attached [2025-09-23 15:15:46.567] mtd32 attached [2025-09-23 15:15:46.583] mtd24 attached [2025-09-23 15:15:46.631] RTNETLINK answers: File exists [2025-09-23 15:15:46.631] ubi0:animations is mounted. [2025-09-23 15:15:46.647] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:15:46.647] ubi1:dml_code is mounted. [2025-09-23 15:15:46.699] ubi2:textures is mounted. [2025-09-23 15:15:46.699] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:15:46.699] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:15:46.699] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:15:46.699] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:15:46.699] data.LB_FadeInType0=100 [2025-09-23 15:15:46.699] data.CHLH_FadeInType0=0 [2025-09-23 15:15:46.699] data.WU_FadeInDelay=0 [2025-09-23 15:15:46.699] max_time_out=0 [2025-09-23 15:15:46.699] No splash screen [2025-09-23 15:15:46.699] stop dss Done [2025-09-23 15:15:46.731] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:15:46.768] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:15:46.768] /dev/mem opened. [2025-09-23 15:15:46.768] Memory mapped at address 0xffff88291000. [2025-09-23 15:15:46.768] Read at address 0x00600018 (0xffff88291018): 0x00000000 [2025-09-23 15:15:46.768] Write at address 0x00600018 (0xffff88291018): 0x00400040, readback 0x00400040 [2025-09-23 15:15:46.992] Loaded PowerVR consumer services. [2025-09-23 15:15:47.034] Waiting data available... [2025-09-23 15:15:47.034] 512+0 records in [2025-09-23 15:15:47.034] 512+0 records out [2025-09-23 15:15:47.050] Starting syslogd/klogd: done [2025-09-23 15:15:47.066] DML Start [2025-09-23 15:15:47.259] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:15:47.482] DML res1: 0 [2025-09-23 15:15:47.977] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:15:47.977] Read Success [2025-09-23 15:15:47.977] Verifying certificate... [2025-09-23 15:15:48.216] Verified OK [2025-09-23 15:15:48.232] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:15:49.940] Verified OK [2025-09-23 15:15:49.940] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:15:50.541] Verified OK [2025-09-23 15:15:50.541] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:15:53.163] fs.protected_hardlinks = 1 [2025-09-23 15:15:53.163] fs.protected_symlinks = 1 [2025-09-23 15:15:53.179] kernel.modules_disabled = 1 [2025-09-23 15:15:53.371] [2025-09-23 15:15:53.371] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:15:54.578] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:16:02.344] SBL1:1210.0.1.0 [2025-09-23 15:16:02.376] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:16:03.959] SBL2:1210.0.1.0 [2025-09-23 15:16:03.991] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:16:04.103] j-A [2025-09-23 15:16:11.476] The R5 Autosar Classic is running [2025-09-23 15:16:11.476] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:16:11.476] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:16:12.083] INIT: version 2.96 booting [2025-09-23 15:16:12.195] INIT: Entering runlevel: 5 [2025-09-23 15:16:12.339] mtd24 attached [2025-09-23 15:16:12.355] mtd28 attached [2025-09-23 15:16:12.387] mtd32 attached [2025-09-23 15:16:12.387] ubi0:textures is mounted. [2025-09-23 15:16:12.419] ubi1:animations is mounted. [2025-09-23 15:16:12.484] RTNETLINK answers: File exists [2025-09-23 15:16:12.484] ubi2:dml_code is mounted. [2025-09-23 15:16:12.484] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:16:12.484] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:16:12.484] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:16:12.484] data.LB_FadeInType0=100 [2025-09-23 15:16:12.484] data.CHLH_FadeInType0=0 [2025-09-23 15:16:12.484] data.WU_FadeInDelay=0 [2025-09-23 15:16:12.484] max_time_out=0 [2025-09-23 15:16:12.484] No splash screen [2025-09-23 15:16:12.484] stop dss Done [2025-09-23 15:16:12.484] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:16:12.484] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:16:12.538] /dev/mem opened. [2025-09-23 15:16:12.538] Memory mapped at address 0xffffbc410000. [2025-09-23 15:16:12.538] Read at address 0x00600018 (0xffffbc410018): 0x00000000 [2025-09-23 15:16:12.538] Write at address 0x00600018 (0xffffbc410018): 0x00400040, readback 0x00400040 [2025-09-23 15:16:12.618] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:16:12.640] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:16:12.672] Loaded PowerVR consumer services. [2025-09-23 15:16:12.800] Waiting data available... [2025-09-23 15:16:12.816] 512+0 records in [2025-09-23 15:16:12.816] 512+0 records out [2025-09-23 15:16:12.832] Starting syslogd/klogd: done [2025-09-23 15:16:12.848] DML Start [2025-09-23 15:16:13.023] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:16:13.248] DML res1: 0 [2025-09-23 15:16:13.711] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:16:13.727] Read Success [2025-09-23 15:16:13.727] Verifying certificate... [2025-09-23 15:16:13.983] Verified OK [2025-09-23 15:16:14.000] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:16:15.662] Verified OK [2025-09-23 15:16:15.662] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:16:16.269] Verified OK [2025-09-23 15:16:16.269] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:16:18.844] fs.protected_hardlinks = 1 [2025-09-23 15:16:18.844] fs.protected_symlinks = 1 [2025-09-23 15:16:18.844] kernel.modules_disabled = 1 [2025-09-23 15:16:19.165] [2025-09-23 15:16:19.165] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:16:20.343] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:16:28.113] SBL1:1210.0.1.0 [2025-09-23 15:16:28.161] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:16:29.727] SBL2:1210.0.1.0 [2025-09-23 15:16:29.775] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:16:29.871] j-A [2025-09-23 15:16:37.225] The R5 Autosar Classic is running [2025-09-23 15:16:37.527] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:16:37.527] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:16:37.857] INIT: version 2.96 booting [2025-09-23 15:16:37.969] INIT: Entering runlevel: 5 [2025-09-23 15:16:38.129] mtd24 attached [2025-09-23 15:16:38.129] mtd32 attached [2025-09-23 15:16:38.144] mtd28 attached [2025-09-23 15:16:38.192] ubi0:textures is mounted. [2025-09-23 15:16:38.192] RTNETLINK answers: File exists [2025-09-23 15:16:38.228] ubi2:animations is mounted. [2025-09-23 15:16:38.228] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:16:38.228] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:16:38.228] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:16:38.228] ubi1:dml_code is mounted. [2025-09-23 15:16:38.228] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:16:38.228] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:16:38.244] data.LB_FadeInType0=100 [2025-09-23 15:16:38.265] data.CHLH_FadeInType0=0 [2025-09-23 15:16:38.265] data.WU_FadeInDelay=0 [2025-09-23 15:16:38.265] max_time_out=0 [2025-09-23 15:16:38.265] No splash screen [2025-09-23 15:16:38.265] stop dss Done [2025-09-23 15:16:38.297] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:16:38.337] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:16:38.337] /dev/mem opened. [2025-09-23 15:16:38.337] Memory mapped at address 0xffffabfe5000. [2025-09-23 15:16:38.337] Read at address 0x00600018 (0xffffabfe5018): 0x00000000 [2025-09-23 15:16:38.337] Write at address 0x00600018 (0xffffabfe5018): 0x00400040, readback 0x00400040 [2025-09-23 15:16:38.401] Loaded PowerVR consumer services. [2025-09-23 15:16:38.575] Waiting data available... [2025-09-23 15:16:38.575] 512+0 records in [2025-09-23 15:16:38.575] 512+0 records out [2025-09-23 15:16:38.608] Starting syslogd/klogd: done [2025-09-23 15:16:38.624] DML Start [2025-09-23 15:16:38.799] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:16:39.055] DML res1: 0 [2025-09-23 15:16:39.481] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:16:39.481] Read Success [2025-09-23 15:16:39.481] Verifying certificate... [2025-09-23 15:16:39.769] Verified OK [2025-09-23 15:16:39.785] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:16:41.472] Verified OK [2025-09-23 15:16:41.472] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:16:42.088] Verified OK [2025-09-23 15:16:42.088] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:16:44.648] fs.protected_hardlinks = 1 [2025-09-23 15:16:44.663] fs.protected_symlinks = 1 [2025-09-23 15:16:44.663] kernel.modules_disabled = 1 [2025-09-23 15:16:44.871] [2025-09-23 15:16:44.871] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:16:46.105] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:16:54.307] SBL1:1210.0.1.0 [2025-09-23 15:16:54.308] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:16:55.500] SBL2:1210.0.1.0 [2025-09-23 15:16:55.547] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:16:55.643] j-A [2025-09-23 15:17:02.998] The R5 Autosar Classic is running [2025-09-23 15:17:03.019] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:17:03.019] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:17:03.626] INIT: version 2.96 booting [2025-09-23 15:17:03.738] INIT: Entering runlevel: 5 [2025-09-23 15:17:03.882] mtd24 attached [2025-09-23 15:17:03.898] mtd28 attached [2025-09-23 15:17:03.914] mtd32 attached [2025-09-23 15:17:03.946] ubi0:textures is mounted. [2025-09-23 15:17:03.962] RTNETLINK answers: File exists [2025-09-23 15:17:04.000] ubi1:animations is mounted. [2025-09-23 15:17:04.000] ubi2:dml_code is mounted. [2025-09-23 15:17:04.000] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:17:04.000] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:17:04.000] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:17:04.034] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:17:04.034] data.LB_FadeInType0=100 [2025-09-23 15:17:04.034] data.CHLH_FadeInType0=0 [2025-09-23 15:17:04.034] data.WU_FadeInDelay=0 [2025-09-23 15:17:04.034] max_time_out=0 [2025-09-23 15:17:04.034] No splash screen [2025-09-23 15:17:04.034] stop dss Done [2025-09-23 15:17:04.034] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:17:04.104] /dev/mem opened. [2025-09-23 15:17:04.104] Memory mapped at address 0xffffa0d25000. [2025-09-23 15:17:04.104] Read at address 0x00600018 (0xffffa0d25018): 0x00000000 [2025-09-23 15:17:04.104] Write at address 0x00600018 (0xffffa0d25018): 0x00400040, readback 0x00400040 [2025-09-23 15:17:04.120] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:17:04.135] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:17:04.215] Loaded PowerVR consumer services. [2025-09-23 15:17:04.368] Waiting data available... [2025-09-23 15:17:04.368] 512+0 records in [2025-09-23 15:17:04.368] 512+0 records out [2025-09-23 15:17:04.384] Starting syslogd/klogd: done [2025-09-23 15:17:04.400] DML Start [2025-09-23 15:17:04.593] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:17:04.816] DML res1: 0 [2025-09-23 15:17:05.248] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:17:05.269] Read Success [2025-09-23 15:17:05.269] Verifying certificate... [2025-09-23 15:17:05.508] Verified OK [2025-09-23 15:17:05.508] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:17:07.267] Verified OK [2025-09-23 15:17:07.267] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:17:07.874] Verified OK [2025-09-23 15:17:07.890] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:17:10.496] fs.protected_hardlinks = 1 [2025-09-23 15:17:10.496] fs.protected_symlinks = 1 [2025-09-23 15:17:10.512] kernel.modules_disabled = 1 [2025-09-23 15:17:10.749] [2025-09-23 15:17:10.749] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:17:11.908] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:17:20.098] SBL1:1210.0.1.0 [2025-09-23 15:17:20.146] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:17:21.714] SBL2:1210.0.1.0 [2025-09-23 15:17:21.761] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:17:21.857] j-A [2025-09-23 15:17:29.212] The R5 Autosar Classic is running [2025-09-23 15:17:29.233] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:17:29.233] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:17:29.840] INIT: version 2.96 booting [2025-09-23 15:17:29.952] INIT: Entering runlevel: 5 [2025-09-23 15:17:30.096] mtd24 attached [2025-09-23 15:17:30.112] mtd32 attached [2025-09-23 15:17:30.128] mtd28 attached [2025-09-23 15:17:30.160] ubi0:textures is mounted. [2025-09-23 15:17:30.283] RTNETLINK answers: File exists [2025-09-23 15:17:30.284] ubi2:animations is mounted. [2025-09-23 15:17:30.284] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:17:30.284] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:17:30.284] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:17:30.284] ubi1:dml_code is mounted. [2025-09-23 15:17:30.284] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:17:30.284] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:17:30.284] data.LB_FadeInType0=100 [2025-09-23 15:17:30.284] data.CHLH_FadeInType0=0 [2025-09-23 15:17:30.284] data.WU_FadeInDelay=0 [2025-09-23 15:17:30.284] max_time_out=0 [2025-09-23 15:17:30.284] No splash screen [2025-09-23 15:17:30.284] stop dss Done [2025-09-23 15:17:30.284] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:17:30.284] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:17:30.311] /dev/mem opened. [2025-09-23 15:17:30.311] Memory mapped at address 0xffffa7999000. [2025-09-23 15:17:30.311] Read at address 0x00600018 (0xffffa7999018): 0x00000000 [2025-09-23 15:17:30.311] Write at address 0x00600018 (0xffffa7999018): 0x00400040, readback 0x00400040 [2025-09-23 15:17:30.455] Loaded PowerVR consumer services. [2025-09-23 15:17:30.582] Waiting data available... [2025-09-23 15:17:30.582] 512+0 records in [2025-09-23 15:17:30.582] 512+0 records out [2025-09-23 15:17:30.614] Starting syslogd/klogd: done [2025-09-23 15:17:30.630] DML Start [2025-09-23 15:17:30.822] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:17:31.045] DML res1: 0 [2025-09-23 15:17:31.549] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:17:31.549] Read Success [2025-09-23 15:17:31.549] Verifying certificate... [2025-09-23 15:17:31.788] Verified OK [2025-09-23 15:17:31.804] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:17:33.463] Verified OK [2025-09-23 15:17:33.463] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:17:34.071] Verified OK [2025-09-23 15:17:34.071] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:17:36.613] fs.protected_hardlinks = 1 [2025-09-23 15:17:36.629] fs.protected_symlinks = 1 [2025-09-23 15:17:36.629] kernel.modules_disabled = 1 [2025-09-23 15:17:36.836] [2025-09-23 15:17:36.836] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:17:38.137] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:17:45.854] SBL1:1210.0.1.0 [2025-09-23 15:17:45.902] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:17:47.470] SBL2:1210.0.1.0 [2025-09-23 15:17:47.518] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:17:47.614] j-A [2025-09-23 15:17:54.968] The R5 Autosar Classic is running [2025-09-23 15:17:54.990] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:17:54.990] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:17:55.599] INIT: version 2.96 booting [2025-09-23 15:17:55.710] INIT: Entering runlevel: 5 [2025-09-23 15:17:55.870] mtd28 attached [2025-09-23 15:17:55.870] mtd32 attached [2025-09-23 15:17:55.886] mtd24 attached [2025-09-23 15:17:55.918] ubi0:animations is mounted. [2025-09-23 15:17:55.934] RTNETLINK answers: File exists [2025-09-23 15:17:55.934] ubi1:dml_code is mounted. [2025-09-23 15:17:55.994] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:17:55.994] ubi2:textures is mounted. [2025-09-23 15:17:55.994] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:17:55.994] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:17:55.994] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:17:55.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:17:55.994] data.LB_FadeInType0=100 [2025-09-23 15:17:55.994] data.CHLH_FadeInType0=0 [2025-09-23 15:17:55.994] data.WU_FadeInDelay=0 [2025-09-23 15:17:55.994] max_time_out=0 [2025-09-23 15:17:55.994] No splash screen [2025-09-23 15:17:55.994] stop dss Done [2025-09-23 15:17:56.080] /dev/mem opened. [2025-09-23 15:17:56.080] Memory mapped at address 0xffff8ecef000. [2025-09-23 15:17:56.080] Read at address 0x00600018 (0xffff8ecef018): 0x00000000 [2025-09-23 15:17:56.080] Write at address 0x00600018 (0xffff8ecef018): 0x00400040, readback 0x00400040 [2025-09-23 15:17:56.080] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:17:56.080] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:17:56.225] Loaded PowerVR consumer services. [2025-09-23 15:17:56.321] 512+0 records in [2025-09-23 15:17:56.321] 512+0 records out [2025-09-23 15:17:56.337] Waiting data available... [2025-09-23 15:17:56.353] Starting syslogd/klogd: done [2025-09-23 15:17:56.369] DML Start [2025-09-23 15:17:56.544] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:17:56.785] DML res1: 0 [2025-09-23 15:17:57.194] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:17:57.194] Read Success [2025-09-23 15:17:57.194] Verifying certificate... [2025-09-23 15:17:57.434] Verified OK [2025-09-23 15:17:57.450] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:17:59.223] Verified OK [2025-09-23 15:17:59.223] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:17:59.830] Verified OK [2025-09-23 15:17:59.851] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:18:02.426] fs.protected_hardlinks = 1 [2025-09-23 15:18:02.426] fs.protected_symlinks = 1 [2025-09-23 15:18:02.441] kernel.modules_disabled = 1 [2025-09-23 15:18:02.649] [2025-09-23 15:18:02.649] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:18:03.861] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:18:11.857] SBL1:1210.0.1.0 [2025-09-23 15:18:11.906] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:18:13.472] SBL2:1210.0.1.0 [2025-09-23 15:18:13.520] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:18:13.616] j-A [2025-09-23 15:18:20.972] The R5 Autosar Classic is running [2025-09-23 15:18:20.997] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:18:20.997] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:18:21.605] INIT: version 2.96 booting [2025-09-23 15:18:21.717] INIT: Entering runlevel: 5 [2025-09-23 15:18:21.876] mtd24 attached [2025-09-23 15:18:21.893] mtd28 attached [2025-09-23 15:18:21.909] ubi0:textures is mounted. [2025-09-23 15:18:22.031] mtd32 attached [2025-09-23 15:18:22.031] ubi1:animations is mounted. [2025-09-23 15:18:22.032] RTNETLINK answers: File exists [2025-09-23 15:18:22.032] ubi2:dml_code is mounted. [2025-09-23 15:18:22.032] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:18:22.032] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:18:22.032] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:18:22.032] data.LB_FadeInType0=100 [2025-09-23 15:18:22.032] data.CHLH_FadeInType0=0 [2025-09-23 15:18:22.032] data.WU_FadeInDelay=0 [2025-09-23 15:18:22.032] max_time_out=0 [2025-09-23 15:18:22.032] No splash screen [2025-09-23 15:18:22.032] stop dss Done [2025-09-23 15:18:22.032] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:18:22.032] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:18:22.064] /dev/mem opened. [2025-09-23 15:18:22.064] Memory mapped at address 0xffff84098000. [2025-09-23 15:18:22.064] Read at address 0x00600018 (0xffff84098018): 0x00000000 [2025-09-23 15:18:22.064] Write at address 0x00600018 (0xffff84098018): 0x00400040, readback 0x00400040 [2025-09-23 15:18:22.112] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:18:22.128] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:18:22.287] Loaded PowerVR consumer services. [2025-09-23 15:18:22.335] Waiting data available... [2025-09-23 15:18:22.335] 512+0 records in [2025-09-23 15:18:22.335] 512+0 records out [2025-09-23 15:18:22.382] Starting syslogd/klogd: done [2025-09-23 15:18:22.414] DML Start [2025-09-23 15:18:22.590] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:18:22.815] DML res1: 0 [2025-09-23 15:18:23.211] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:18:23.211] Read Success [2025-09-23 15:18:23.211] Verifying certificate... [2025-09-23 15:18:23.451] Verified OK [2025-09-23 15:18:23.467] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:18:25.208] Verified OK [2025-09-23 15:18:25.208] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:18:25.829] Verified OK [2025-09-23 15:18:25.829] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:18:28.403] fs.protected_hardlinks = 1 [2025-09-23 15:18:28.403] fs.protected_symlinks = 1 [2025-09-23 15:18:28.419] kernel.modules_disabled = 1 [2025-09-23 15:18:28.611] [2025-09-23 15:18:28.611] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:18:29.914] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:18:37.630] SBL1:1210.0.1.0 [2025-09-23 15:18:37.662] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:18:39.245] SBL2:1210.0.1.0 [2025-09-23 15:18:39.277] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:18:39.389] j-A [2025-09-23 15:18:46.781] The R5 Autosar Classic is running [2025-09-23 15:18:46.781] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:18:46.781] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:18:47.371] INIT: version 2.96 booting [2025-09-23 15:18:47.466] INIT: Entering runlevel: 5 [2025-09-23 15:18:47.626] mtd28 attached [2025-09-23 15:18:47.794] mtd24 attached [2025-09-23 15:18:47.795] mtd32 attached [2025-09-23 15:18:47.795] ubi1:textures is mounted. [2025-09-23 15:18:47.795] ubi0:animations is mounted. [2025-09-23 15:18:47.795] RTNETLINK answers: File exists [2025-09-23 15:18:47.795] ubi2:dml_code is mounted. [2025-09-23 15:18:47.795] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:18:47.795] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:18:47.795] data.LB_FadeInType0=100 [2025-09-23 15:18:47.795] data.CHLH_FadeInType0=0 [2025-09-23 15:18:47.795] data.WU_FadeInDelay=0 [2025-09-23 15:18:47.795] max_time_out=0 [2025-09-23 15:18:47.795] No splash screen [2025-09-23 15:18:47.795] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:18:47.795] stop dss Done [2025-09-23 15:18:47.795] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:18:47.795] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:18:47.829] /dev/mem opened. [2025-09-23 15:18:47.829] Memory mapped at address 0xffffa24ff000. [2025-09-23 15:18:47.829] Read at address 0x00600018 (0xffffa24ff018): 0x00000000 [2025-09-23 15:18:47.829] Write at address 0x00600018 (0xffffa24ff018): 0x00400040, readback 0x00400040 [2025-09-23 15:18:47.845] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:18:47.861] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:18:48.005] Loaded PowerVR consumer services. [2025-09-23 15:18:48.107] 512+0 records in [2025-09-23 15:18:48.107] 512+0 records out [2025-09-23 15:18:48.107] Waiting data available... [2025-09-23 15:18:48.123] Starting syslogd/klogd: done [2025-09-23 15:18:48.139] DML Start [2025-09-23 15:18:48.299] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:18:48.507] DML res1: 0 [2025-09-23 15:18:49.048] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:18:49.048] Read Success [2025-09-23 15:18:49.048] Verifying certificate... [2025-09-23 15:18:49.272] Verified OK [2025-09-23 15:18:49.288] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:18:51.005] Verified OK [2025-09-23 15:18:51.005] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:18:51.548] Verified OK [2025-09-23 15:18:51.548] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:18:54.204] fs.protected_hardlinks = 1 [2025-09-23 15:18:54.219] fs.protected_symlinks = 1 [2025-09-23 15:18:54.219] kernel.modules_disabled = 1 [2025-09-23 15:18:54.426] [2025-09-23 15:18:54.426] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:18:55.638] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:19:03.448] SBL1:1210.0.1.0 [2025-09-23 15:19:03.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:19:05.062] SBL2:1210.0.1.0 [2025-09-23 15:19:05.109] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:19:05.206] j-A [2025-09-23 15:19:12.579] The R5 Autosar Classic is running [2025-09-23 15:19:12.579] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:19:12.579] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:19:13.187] INIT: version 2.96 booting [2025-09-23 15:19:13.299] INIT: Entering runlevel: 5 [2025-09-23 15:19:13.443] mtd24 attached [2025-09-23 15:19:13.459] mtd32 attached [2025-09-23 15:19:13.459] mtd28 attached [2025-09-23 15:19:13.491] ubi0:textures is mounted. [2025-09-23 15:19:13.575] ubi1:dml_code is mounted. [2025-09-23 15:19:13.575] RTNETLINK answers: File exists [2025-09-23 15:19:13.575] ubi2:animations is mounted. [2025-09-23 15:19:13.575] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:19:13.575] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:19:13.575] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:19:13.575] data.LB_FadeInType0=100 [2025-09-23 15:19:13.575] data.CHLH_FadeInType0=0 [2025-09-23 15:19:13.575] data.WU_FadeInDelay=0 [2025-09-23 15:19:13.575] max_time_out=0 [2025-09-23 15:19:13.575] No splash screen [2025-09-23 15:19:13.575] stop dss Done [2025-09-23 15:19:13.575] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:19:13.575] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:19:13.606] /dev/mem opened. [2025-09-23 15:19:13.638] Memory mapped at address 0xffffa3eb4000. [2025-09-23 15:19:13.638] Read at address 0x00600018 (0xffffa3eb4018): 0x00000000 [2025-09-23 15:19:13.638] Write at address 0x00600018 (0xffffa3eb4018): 0x00400040, readback 0x00400040 [2025-09-23 15:19:13.669] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:19:13.669] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:19:13.845] Loaded PowerVR consumer services. [2025-09-23 15:19:13.909] 512+0 records in [2025-09-23 15:19:13.909] 512+0 records out [2025-09-23 15:19:13.925] Starting syslogd/klogd: Waiting data available... [2025-09-23 15:19:13.941] done [2025-09-23 15:19:13.957] DML Start [2025-09-23 15:19:14.133] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:19:14.389] DML res1: 0 [2025-09-23 15:19:14.768] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:19:14.768] Read Success [2025-09-23 15:19:14.768] Verifying certificate... [2025-09-23 15:19:15.009] Verified OK [2025-09-23 15:19:15.025] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:19:16.592] Verified OK [2025-09-23 15:19:16.592] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:19:17.209] Verified OK [2025-09-23 15:19:17.209] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:19:19.991] fs.protected_hardlinks = 1 [2025-09-23 15:19:19.991] fs.protected_symlinks = 1 [2025-09-23 15:19:19.991] kernel.modules_disabled = 1 [2025-09-23 15:19:20.198] [2025-09-23 15:19:20.198] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:19:21.470] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:19:29.209] SBL1:1210.0.1.0 [2025-09-23 15:19:29.241] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:19:30.824] SBL2:1210.0.1.0 [2025-09-23 15:19:30.856] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:19:30.968] j-A [2025-09-23 15:19:38.338] The R5 Autosar Classic is running [2025-09-23 15:19:38.338] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:19:38.338] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:19:38.945] INIT: version 2.96 booting [2025-09-23 15:19:39.057] INIT: Entering runlevel: 5 [2025-09-23 15:19:39.218] mtd32 attached [2025-09-23 15:19:39.218] mtd24 attached [2025-09-23 15:19:39.234] mtd28 attached [2025-09-23 15:19:39.266] ubi0:dml_code is mounted. [2025-09-23 15:19:39.281] RTNETLINK answers: File exists [2025-09-23 15:19:39.347] ubi1:textures is mounted. [2025-09-23 15:19:39.347] ubi2:animations is mounted. [2025-09-23 15:19:39.347] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:19:39.347] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:19:39.347] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:19:39.347] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:19:39.347] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:19:39.347] data.LB_FadeInType0=100 [2025-09-23 15:19:39.347] data.CHLH_FadeInType0=0 [2025-09-23 15:19:39.347] data.WU_FadeInDelay=0 [2025-09-23 15:19:39.347] max_time_out=0 [2025-09-23 15:19:39.347] No splash screen [2025-09-23 15:19:39.347] stop dss Done [2025-09-23 15:19:39.418] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:19:39.418] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:19:39.418] /dev/mem opened. [2025-09-23 15:19:39.418] Memory mapped at address 0xffffb6d7c000. [2025-09-23 15:19:39.418] Read at address 0x00600018 (0xffffb6d7c018): 0x00000000 [2025-09-23 15:19:39.418] Write at address 0x00600018 (0xffffb6d7c018): 0x00400040, readback 0x00400040 [2025-09-23 15:19:39.642] Loaded PowerVR consumer services. [2025-09-23 15:19:39.658] Waiting data available... [2025-09-23 15:19:39.674] 512+0 records in [2025-09-23 15:19:39.674] 512+0 records out [2025-09-23 15:19:39.706] Starting syslogd/klogd: done [2025-09-23 15:19:39.722] DML Start [2025-09-23 15:19:39.866] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:19:40.138] DML res1: 0 [2025-09-23 15:19:40.553] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:19:40.569] Read Success [2025-09-23 15:19:40.569] Verifying certificate... [2025-09-23 15:19:40.825] Verified OK [2025-09-23 15:19:40.857] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:19:42.520] Verified OK [2025-09-23 15:19:42.520] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:19:43.169] Verified OK [2025-09-23 15:19:43.169] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:19:45.791] fs.protected_hardlinks = 1 [2025-09-23 15:19:45.791] fs.protected_symlinks = 1 [2025-09-23 15:19:45.807] kernel.modules_disabled = 1 [2025-09-23 15:19:45.998] [2025-09-23 15:19:45.998] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:19:47.210] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:19:54.964] SBL1:1210.0.1.0 [2025-09-23 15:19:55.012] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:19:56.579] SBL2:1210.0.1.0 [2025-09-23 15:19:56.611] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:19:56.723] j-A [2025-09-23 15:20:04.078] The R5 Autosar Classic is running [2025-09-23 15:20:04.078] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:20:04.099] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:20:04.706] INIT: version 2.96 booting [2025-09-23 15:20:04.818] INIT: Entering runlevel: 5 [2025-09-23 15:20:04.962] mtd24 attached [2025-09-23 15:20:04.978] mtd28 attached [2025-09-23 15:20:04.994] mtd32 attached [2025-09-23 15:20:05.042] RTNETLINK answers: File exists [2025-09-23 15:20:05.105] ubi0:textures is mounted. [2025-09-23 15:20:05.105] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:20:05.105] ubi2:dml_code is mounted. [2025-09-23 15:20:05.105] ubi1:animations is mounted. [2025-09-23 15:20:05.105] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:20:05.105] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:20:05.105] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:20:05.105] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:20:05.105] data.LB_FadeInType0=100 [2025-09-23 15:20:05.105] data.CHLH_FadeInType0=0 [2025-09-23 15:20:05.105] data.WU_FadeInDelay=0 [2025-09-23 15:20:05.105] max_time_out=0 [2025-09-23 15:20:05.105] No splash screen [2025-09-23 15:20:05.105] stop dss Done [2025-09-23 15:20:05.152] /dev/mem opened. [2025-09-23 15:20:05.152] Memory mapped at address 0xffff9eda3000. [2025-09-23 15:20:05.178] Read at address 0x00600018 (0xffff9eda3018): 0x00000000 [2025-09-23 15:20:05.178] Write at address 0x00600018 (0xffff9eda3018): 0x00400040, readback 0x00400040 [2025-09-23 15:20:05.178] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:20:05.194] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:20:05.402] Loaded PowerVR consumer services. [2025-09-23 15:20:05.434] 512+0 records in [2025-09-23 15:20:05.434] 512+0 records out [2025-09-23 15:20:05.466] Starting syslogd/klogd: Waiting data available... [2025-09-23 15:20:05.482] done [2025-09-23 15:20:05.482] DML Start [2025-09-23 15:20:05.642] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:20:05.866] DML res1: 0 [2025-09-23 15:20:06.311] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:20:06.311] Read Success [2025-09-23 15:20:06.311] Verifying certificate... [2025-09-23 15:20:06.582] Verified OK [2025-09-23 15:20:06.597] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:20:08.261] Verified OK [2025-09-23 15:20:08.277] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:20:08.964] Verified OK [2025-09-23 15:20:08.964] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:20:11.539] fs.protected_hardlinks = 1 [2025-09-23 15:20:11.539] fs.protected_symlinks = 1 [2025-09-23 15:20:11.555] kernel.modules_disabled = 1 [2025-09-23 15:20:11.731] [2025-09-23 15:20:11.731] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:20:12.988] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:20:20.750] SBL1:1210.0.1.0 [2025-09-23 15:20:20.781] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:20:22.364] SBL2:1210.0.1.0 [2025-09-23 15:20:22.396] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:20:22.509] j-A [2025-09-23 15:20:29.882] The R5 Autosar Classic is running [2025-09-23 15:20:29.882] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:20:29.882] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:20:30.489] INIT: version 2.96 booting [2025-09-23 15:20:30.601] INIT: Entering runlevel: 5 [2025-09-23 15:20:30.746] mtd24 attached [2025-09-23 15:20:30.762] mtd32 attached [2025-09-23 15:20:30.794] mtd28 attached [2025-09-23 15:20:30.794] ubi0:textures is mounted. [2025-09-23 15:20:30.810] ubi1:dml_code is mounted. [2025-09-23 15:20:30.826] RTNETLINK answers: File exists [2025-09-23 15:20:30.879] ubi2:animations is mounted. [2025-09-23 15:20:30.879] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:20:30.879] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:20:30.879] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:20:30.879] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:20:30.879] data.LB_FadeInType0=100 [2025-09-23 15:20:30.879] data.CHLH_FadeInType0=0 [2025-09-23 15:20:30.879] data.WU_FadeInDelay=0 [2025-09-23 15:20:30.879] max_time_out=0 [2025-09-23 15:20:30.879] No splash screen [2025-09-23 15:20:30.879] stop dss Done [2025-09-23 15:20:30.879] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:20:30.967] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:20:30.967] /dev/mem opened. [2025-09-23 15:20:30.967] Memory mapped at address 0xffff878b1000. [2025-09-23 15:20:30.967] Read at address 0x00600018 (0xffff878b1018): 0x00000000 [2025-09-23 15:20:30.967] Write at address 0x00600018 (0xffff878b1018): 0x00400040, readback 0x00400040 [2025-09-23 15:20:30.967] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:20:31.111] Loaded PowerVR consumer services. [2025-09-23 15:20:31.207] Waiting data available... [2025-09-23 15:20:31.223] 512+0 records in [2025-09-23 15:20:31.223] 512+0 records out [2025-09-23 15:20:31.271] Starting syslogd/klogd: done [2025-09-23 15:20:31.303] DML Start [2025-09-23 15:20:31.479] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:20:31.703] DML res1: 0 [2025-09-23 15:20:32.135] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:20:32.156] Read Success [2025-09-23 15:20:32.156] Verifying certificate... [2025-09-23 15:20:32.380] Verified OK [2025-09-23 15:20:32.380] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:20:34.008] Verified OK [2025-09-23 15:20:34.008] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:20:34.648] Verified OK [2025-09-23 15:20:34.648] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:20:37.317] fs.protected_hardlinks = 1 [2025-09-23 15:20:37.333] fs.protected_symlinks = 1 [2025-09-23 15:20:37.349] kernel.modules_disabled = 1 [2025-09-23 15:20:37.542] [2025-09-23 15:20:37.542] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:20:38.794] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:20:46.511] SBL1:1210.0.1.0 [2025-09-23 15:20:46.558] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:20:48.125] SBL2:1210.0.1.0 [2025-09-23 15:20:48.173] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:20:48.269] j-A [2025-09-23 15:20:55.624] The R5 Autosar Classic is running [2025-09-23 15:20:55.647] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:20:55.647] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:20:56.255] INIT: version 2.96 booting [2025-09-23 15:20:56.424] INIT: Entering runlevel: 5 [2025-09-23 15:20:56.526] mtd24 attached [2025-09-23 15:20:56.542] mtd32 attached [2025-09-23 15:20:56.542] mtd28 attached [2025-09-23 15:20:56.661] RTNETLINK answers: File exists [2025-09-23 15:20:56.661] ubi1:dml_code is mounted. [2025-09-23 15:20:56.661] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:20:56.661] ubi0:textures is mounted. [2025-09-23 15:20:56.661] ubi2:animations is mounted. [2025-09-23 15:20:56.661] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:20:56.661] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:20:56.661] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:20:56.661] data.LB_FadeInType0=100 [2025-09-23 15:20:56.661] data.CHLH_FadeInType0=0 [2025-09-23 15:20:56.661] data.WU_FadeInDelay=0 [2025-09-23 15:20:56.661] max_time_out=0 [2025-09-23 15:20:56.661] No splash screen [2025-09-23 15:20:56.661] stop dss Done [2025-09-23 15:20:56.661] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:20:56.693] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:20:56.732] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:20:56.732] /dev/mem opened. [2025-09-23 15:20:56.732] Memory mapped at address 0xffffa65d1000. [2025-09-23 15:20:56.732] Read at address 0x00600018 (0xffffa65d1018): 0x00000000 [2025-09-23 15:20:56.732] Write at address 0x00600018 (0xffffa65d1018): 0x00400040, readback 0x00400040 [2025-09-23 15:20:56.843] Loaded PowerVR consumer services. [2025-09-23 15:20:56.971] Waiting data available... [2025-09-23 15:20:56.987] 512+0 records in [2025-09-23 15:20:56.987] 512+0 records out [2025-09-23 15:20:57.036] Starting syslogd/klogd: done [2025-09-23 15:20:57.052] DML Start [2025-09-23 15:20:57.226] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:20:57.451] DML res1: 0 [2025-09-23 15:20:57.898] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:20:57.915] Read Success [2025-09-23 15:20:57.915] Verifying certificate... [2025-09-23 15:20:58.171] Verified OK [2025-09-23 15:20:58.203] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:20:59.785] Verified OK [2025-09-23 15:20:59.785] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:21:00.415] Verified OK [2025-09-23 15:21:00.415] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:21:02.988] fs.protected_hardlinks = 1 [2025-09-23 15:21:03.004] fs.protected_symlinks = 1 [2025-09-23 15:21:03.004] kernel.modules_disabled = 1 [2025-09-23 15:21:03.197] [2025-09-23 15:21:03.197] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:21:04.516] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:21:12.285] SBL1:1210.0.1.0 [2025-09-23 15:21:12.317] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:21:13.900] SBL2:1210.0.1.0 [2025-09-23 15:21:13.931] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:21:14.043] j-A [2025-09-23 15:21:21.418] The R5 Autosar Classic is running [2025-09-23 15:21:21.418] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:21:21.418] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:21:22.026] INIT: version 2.96 booting [2025-09-23 15:21:22.137] INIT: Entering runlevel: 5 [2025-09-23 15:21:22.297] mtd32 attached [2025-09-23 15:21:22.313] mtd24 attached [2025-09-23 15:21:22.313] mtd28 attached [2025-09-23 15:21:22.361] RTNETLINK answers: File exists [2025-09-23 15:21:22.361] ubi0:dml_code is mounted. [2025-09-23 15:21:22.411] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:21:22.411] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:21:22.411] ubi1:textures is mounted. [2025-09-23 15:21:22.411] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:21:22.411] ubi2:animations is mounted. [2025-09-23 15:21:22.411] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:21:22.411] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:21:22.411] data.LB_FadeInType0=100 [2025-09-23 15:21:22.411] data.CHLH_FadeInType0=0 [2025-09-23 15:21:22.432] data.WU_FadeInDelay=0 [2025-09-23 15:21:22.432] max_time_out=0 [2025-09-23 15:21:22.432] No splash screen [2025-09-23 15:21:22.432] stop dss Done [2025-09-23 15:21:22.465] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:21:22.480] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:21:22.513] /dev/mem opened. [2025-09-23 15:21:22.513] Memory mapped at address 0xffff94a80000. [2025-09-23 15:21:22.513] Read at address 0x00600018 (0xffff94a80018): 0x00000000 [2025-09-23 15:21:22.513] Write at address 0x00600018 (0xffff94a80018): 0x00400040, readback 0x00400040 [2025-09-23 15:21:22.737] Loaded PowerVR consumer services. [2025-09-23 15:21:22.799] 512+0 records in [2025-09-23 15:21:22.799] 512+0 records out [2025-09-23 15:21:22.799] Waiting data available... [2025-09-23 15:21:22.831] Starting syslogd/klogd: done [2025-09-23 15:21:22.847] DML Start [2025-09-23 15:21:23.056] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:21:23.312] DML res1: 0 [2025-09-23 15:21:23.677] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:21:23.677] Read Success [2025-09-23 15:21:23.677] Verifying certificate... [2025-09-23 15:21:23.949] Verified OK [2025-09-23 15:21:23.965] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:21:25.579] Verified OK [2025-09-23 15:21:25.579] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:21:26.274] Verified OK [2025-09-23 15:21:26.274] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:21:28.912] fs.protected_hardlinks = 1 [2025-09-23 15:21:28.912] fs.protected_symlinks = 1 [2025-09-23 15:21:28.927] kernel.modules_disabled = 1 [2025-09-23 15:21:29.120] [2025-09-23 15:21:29.120] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:21:30.394] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:21:38.094] SBL1:1210.0.1.0 [2025-09-23 15:21:38.142] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:21:39.724] SBL2:1210.0.1.0 [2025-09-23 15:21:39.756] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:21:39.869] j-A [2025-09-23 15:21:47.206] The R5 Autosar Classic is running [2025-09-23 15:21:47.237] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:21:47.237] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:21:47.845] INIT: version 2.96 booting [2025-09-23 15:21:47.956] INIT: Entering runlevel: 5 [2025-09-23 15:21:48.248] mtd28 attached [2025-09-23 15:21:48.248] mtd24 attached [2025-09-23 15:21:48.248] ubi0:animations is mounted. [2025-09-23 15:21:48.248] mtd32 attached [2025-09-23 15:21:48.248] ubi1:textures is mounted. [2025-09-23 15:21:48.248] RTNETLINK answers: File exists [2025-09-23 15:21:48.248] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:21:48.248] ubi2:dml_code is mounted. [2025-09-23 15:21:48.248] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:21:48.248] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:21:48.248] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:21:48.248] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:21:48.248] data.LB_FadeInType0=100 [2025-09-23 15:21:48.248] data.CHLH_FadeInType0=0 [2025-09-23 15:21:48.248] data.WU_FadeInDelay=0 [2025-09-23 15:21:48.248] max_time_out=0 [2025-09-23 15:21:48.248] No splash screen [2025-09-23 15:21:48.248] stop dss Done [2025-09-23 15:21:48.269] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:21:48.269] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:21:48.311] /dev/mem opened. [2025-09-23 15:21:48.311] Memory mapped at address 0xffffac647000. [2025-09-23 15:21:48.311] Read at address 0x00600018 (0xffffac647018): 0x00000000 [2025-09-23 15:21:48.311] Write at address 0x00600018 (0xffffac647018): 0x00400040, readback 0x00400040 [2025-09-23 15:21:48.502] Loaded PowerVR consumer services. [2025-09-23 15:21:48.566] 512+0 records in [2025-09-23 15:21:48.566] 512+0 records out [2025-09-23 15:21:48.599] Waiting data available... [2025-09-23 15:21:48.615] Starting syslogd/klogd: done [2025-09-23 15:21:48.646] DML Start [2025-09-23 15:21:48.839] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:21:49.078] DML res1: 0 [2025-09-23 15:21:49.422] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:21:49.422] Read Success [2025-09-23 15:21:49.422] Verifying certificate... [2025-09-23 15:21:49.646] Verified OK [2025-09-23 15:21:49.661] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:21:51.213] Verified OK [2025-09-23 15:21:51.213] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:21:51.844] Verified OK [2025-09-23 15:21:51.844] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:21:54.578] fs.protected_hardlinks = 1 [2025-09-23 15:21:54.578] fs.protected_symlinks = 1 [2025-09-23 15:21:54.612] kernel.modules_disabled = 1 [2025-09-23 15:21:54.771] [2025-09-23 15:21:54.771] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:21:56.171] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:22:04.149] SBL1:1210.0.1.0 [2025-09-23 15:22:04.197] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:22:05.764] SBL2:1210.0.1.0 [2025-09-23 15:22:05.812] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:22:05.908] j-A [2025-09-23 15:22:13.262] The R5 Autosar Classic is running [2025-09-23 15:22:13.287] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:22:13.287] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:22:13.894] INIT: version 2.96 booting [2025-09-23 15:22:14.006] INIT: Entering runlevel: 5 [2025-09-23 15:22:14.167] mtd32 attached [2025-09-23 15:22:14.183] mtd24 attached [2025-09-23 15:22:14.183] mtd28 attached [2025-09-23 15:22:14.230] ubi0:dml_code is mounted. [2025-09-23 15:22:14.295] RTNETLINK answers: File exists [2025-09-23 15:22:14.295] ubi1:textures is mounted. [2025-09-23 15:22:14.295] ubi2:animations is mounted. [2025-09-23 15:22:14.295] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:22:14.295] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:22:14.295] data.LB_FadeInType0=100 [2025-09-23 15:22:14.295] data.CHLH_FadeInType0=0 [2025-09-23 15:22:14.295] data.WU_FadeInDelay=0 [2025-09-23 15:22:14.295] max_time_out=0 [2025-09-23 15:22:14.295] No splash screen [2025-09-23 15:22:14.295] stop dss Done [2025-09-23 15:22:14.295] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:22:14.295] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:22:14.310] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:22:14.359] /dev/mem opened. [2025-09-23 15:22:14.359] Memory mapped at address 0xffff9fd3a000. [2025-09-23 15:22:14.359] Read at address 0x00600018 (0xffff9fd3a018): 0x00000000 [2025-09-23 15:22:14.359] Write at address 0x00600018 (0xffff9fd3a018): 0x00400040, readback 0x00400040 [2025-09-23 15:22:14.451] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:22:14.451] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:22:14.563] Loaded PowerVR consumer services. [2025-09-23 15:22:14.642] 512+0 records in [2025-09-23 15:22:14.659] 512+0 records out [2025-09-23 15:22:14.659] Waiting data available... [2025-09-23 15:22:14.674] Starting syslogd/klogd: done [2025-09-23 15:22:14.690] DML Start [2025-09-23 15:22:14.867] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:22:15.090] DML res1: 0 [2025-09-23 15:22:15.554] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:22:15.575] Read Success [2025-09-23 15:22:15.575] Verifying certificate... [2025-09-23 15:22:15.815] Verified OK [2025-09-23 15:22:15.831] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:22:17.615] Verified OK [2025-09-23 15:22:17.615] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:22:18.142] Verified OK [2025-09-23 15:22:18.142] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:22:20.604] fs.protected_hardlinks = 1 [2025-09-23 15:22:20.620] fs.protected_symlinks = 1 [2025-09-23 15:22:20.620] kernel.modules_disabled = 1 [2025-09-23 15:22:20.812] [2025-09-23 15:22:20.812] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:22:22.217] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:22:24.520] [2025-09-23 15:22:29.939] SBL1:1210.0.1.0 [2025-09-23 15:22:29.987] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:22:31.554] SBL2:1210.0.1.0 [2025-09-23 15:22:31.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:22:31.714] j-A [2025-09-23 15:22:39.051] The R5 Autosar Classic is running [2025-09-23 15:22:39.076] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:22:39.076] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:22:39.684] INIT: version 2.96 booting [2025-09-23 15:22:39.795] INIT: Entering runlevel: 5 [2025-09-23 15:22:39.955] mtd32 attached [2025-09-23 15:22:39.955] mtd24 attached [2025-09-23 15:22:39.972] mtd28 attached [2025-09-23 15:22:40.004] ubi0:dml_code is mounted. [2025-09-23 15:22:40.020] RTNETLINK answers: File exists [2025-09-23 15:22:40.085] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:22:40.085] ubi2:animations is mounted. [2025-09-23 15:22:40.085] ubi1:textures is mounted. [2025-09-23 15:22:40.085] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:22:40.085] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:22:40.085] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:22:40.085] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:22:40.085] data.LB_FadeInType0=100 [2025-09-23 15:22:40.085] data.CHLH_FadeInType0=0 [2025-09-23 15:22:40.085] data.WU_FadeInDelay=0 [2025-09-23 15:22:40.085] max_time_out=0 [2025-09-23 15:22:40.085] No splash screen [2025-09-23 15:22:40.085] stop dss Done [2025-09-23 15:22:40.157] /dev/mem opened. [2025-09-23 15:22:40.157] Memory mapped at address 0xffffae9cc000. [2025-09-23 15:22:40.157] Read at address 0x00600018 (0xffffae9cc018): 0x00000000 [2025-09-23 15:22:40.157] Write at address 0x00600018 (0xffffae9cc018): 0x00400040, readback 0x00400040 [2025-09-23 15:22:40.188] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:22:40.188] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:22:40.379] Loaded PowerVR consumer services. [2025-09-23 15:22:40.411] Waiting data available... [2025-09-23 15:22:40.427] 512+0 records in [2025-09-23 15:22:40.427] 512+0 records out [2025-09-23 15:22:40.459] Starting syslogd/klogd: done [2025-09-23 15:22:40.475] DML Start [2025-09-23 15:22:40.651] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:22:40.843] DML res1: 0 [2025-09-23 15:22:41.392] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:22:41.392] Read Success [2025-09-23 15:22:41.392] Verifying certificate... [2025-09-23 15:22:41.649] Verified OK [2025-09-23 15:22:41.664] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:22:43.231] Verified OK [2025-09-23 15:22:43.231] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:22:43.849] Verified OK [2025-09-23 15:22:43.849] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:22:46.536] fs.protected_hardlinks = 1 [2025-09-23 15:22:46.552] fs.protected_symlinks = 1 [2025-09-23 15:22:46.568] kernel.modules_disabled = 1 [2025-09-23 15:22:46.759] [2025-09-23 15:22:46.759] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:22:47.954] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:22:55.732] SBL1:1210.0.1.0 [2025-09-23 15:22:55.780] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:22:57.347] SBL2:1210.0.1.0 [2025-09-23 15:22:57.378] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:22:57.491] j-A [2025-09-23 15:23:04.844] The R5 Autosar Classic is running [2025-09-23 15:23:04.844] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:23:04.866] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:23:05.474] INIT: version 2.96 booting [2025-09-23 15:23:05.585] INIT: Entering runlevel: 5 [2025-09-23 15:23:05.729] mtd24 attached [2025-09-23 15:23:05.745] mtd32 attached [2025-09-23 15:23:05.745] mtd28 attached [2025-09-23 15:23:05.777] ubi0:textures is mounted. [2025-09-23 15:23:05.809] RTNETLINK answers: File exists [2025-09-23 15:23:05.863] ubi1:dml_code is mounted. [2025-09-23 15:23:05.863] ubi2:animations is mounted. [2025-09-23 15:23:05.863] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:23:05.863] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:23:05.863] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:23:05.863] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:23:05.863] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:23:05.863] data.LB_FadeInType0=100 [2025-09-23 15:23:05.863] data.CHLH_FadeInType0=0 [2025-09-23 15:23:05.863] data.WU_FadeInDelay=0 [2025-09-23 15:23:05.863] max_time_out=0 [2025-09-23 15:23:05.863] No splash screen [2025-09-23 15:23:05.863] stop dss Done [2025-09-23 15:23:05.911] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:23:05.911] /dev/mem opened. [2025-09-23 15:23:05.943] Memory mapped at address 0xffffa45cb000. [2025-09-23 15:23:05.943] Read at address 0x00600018 (0xffffa45cb018): 0x00000000 [2025-09-23 15:23:05.943] Write at address 0x00600018 (0xffffa45cb018): 0x00400040, readback 0x00400040 [2025-09-23 15:23:05.943] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:23:06.039] Loaded PowerVR consumer services. [2025-09-23 15:23:06.167] 512+0 records in [2025-09-23 15:23:06.167] 512+0 records out [2025-09-23 15:23:06.199] Waiting data available... [2025-09-23 15:23:06.230] Starting syslogd/klogd: done [2025-09-23 15:23:06.246] DML Start [2025-09-23 15:23:06.471] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:23:06.694] DML res1: 0 [2025-09-23 15:23:07.126] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:23:07.149] Read Success [2025-09-23 15:23:07.149] Verifying certificate... [2025-09-23 15:23:07.389] Verified OK [2025-09-23 15:23:07.405] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:23:09.157] Verified OK [2025-09-23 15:23:09.157] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:23:09.676] Verified OK [2025-09-23 15:23:09.676] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:23:12.170] fs.protected_hardlinks = 1 [2025-09-23 15:23:12.186] fs.protected_symlinks = 1 [2025-09-23 15:23:12.202] kernel.modules_disabled = 1 [2025-09-23 15:23:12.394] [2025-09-23 15:23:12.394] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:23:13.737] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:23:21.506] SBL1:1210.0.1.0 [2025-09-23 15:23:21.554] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:23:23.120] SBL2:1210.0.1.0 [2025-09-23 15:23:23.168] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:23:23.264] j-A [2025-09-23 15:23:30.618] The R5 Autosar Classic is running [2025-09-23 15:23:30.643] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:23:30.643] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:23:31.251] INIT: version 2.96 booting [2025-09-23 15:23:31.362] INIT: Entering runlevel: 5 [2025-09-23 15:23:31.522] mtd32 attached [2025-09-23 15:23:31.522] mtd28 attached [2025-09-23 15:23:31.538] mtd24 attached [2025-09-23 15:23:31.586] RTNETLINK answers: File exists [2025-09-23 15:23:31.929] ubi0:dml_code is mounted. [2025-09-23 15:23:31.929] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:23:31.929] ubi1:animations is mounted. [2025-09-23 15:23:31.929] ubi2:textures is mounted. [2025-09-23 15:23:31.929] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:23:31.929] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:23:31.929] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:23:31.929] data.LB_FadeInType0=100 [2025-09-23 15:23:31.929] data.CHLH_FadeInType0=0 [2025-09-23 15:23:31.929] data.WU_FadeInDelay=0 [2025-09-23 15:23:31.929] max_time_out=0 [2025-09-23 15:23:31.929] No splash screen [2025-09-23 15:23:31.929] stop dss Done [2025-09-23 15:23:31.929] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:23:31.930] /dev/mem opened. [2025-09-23 15:23:31.930] Memory mapped at address 0xffff831c1000. [2025-09-23 15:23:31.930] Read at address 0x00600018 (0xffff831c1018): 0x00000000 [2025-09-23 15:23:31.930] Write at address 0x00600018 (0xffff831c1018): 0x00400040, readback 0x00400040 [2025-09-23 15:23:31.930] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:23:31.930] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:23:31.930] Loaded PowerVR consumer services. [2025-09-23 15:23:32.009] Waiting data available... [2025-09-23 15:23:32.025] 512+0 records in [2025-09-23 15:23:32.025] 512+0 records out [2025-09-23 15:23:32.072] Starting syslogd/klogd: done [2025-09-23 15:23:32.088] DML Start [2025-09-23 15:23:32.249] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:23:32.490] DML res1: 0 [2025-09-23 15:23:32.913] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:23:32.913] Read Success [2025-09-23 15:23:32.913] Verifying certificate... [2025-09-23 15:23:33.153] Verified OK [2025-09-23 15:23:33.153] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:23:34.873] Verified OK [2025-09-23 15:23:34.873] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:23:35.504] Verified OK [2025-09-23 15:23:35.504] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:23:38.061] fs.protected_hardlinks = 1 [2025-09-23 15:23:38.077] fs.protected_symlinks = 1 [2025-09-23 15:23:38.077] kernel.modules_disabled = 1 [2025-09-23 15:23:38.269] [2025-09-23 15:23:38.269] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:23:39.578] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:23:47.307] SBL1:1210.0.1.0 [2025-09-23 15:23:47.339] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:23:48.922] SBL2:1210.0.1.0 [2025-09-23 15:23:48.954] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:23:49.066] j-A [2025-09-23 15:23:56.439] The R5 Autosar Classic is running [2025-09-23 15:23:56.439] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:23:56.439] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:23:57.046] INIT: version 2.96 booting [2025-09-23 15:23:57.141] INIT: Entering runlevel: 5 [2025-09-23 15:23:57.317] mtd28 attached [2025-09-23 15:23:57.317] mtd24 attached [2025-09-23 15:23:57.333] mtd32 attached [2025-09-23 15:23:57.365] ubi0:animations is mounted. [2025-09-23 15:23:57.382] RTNETLINK answers: File exists [2025-09-23 15:23:57.417] ubi1:textures is mounted. [2025-09-23 15:23:57.417] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:23:57.417] ubi2:dml_code is mounted. [2025-09-23 15:23:57.417] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:23:57.417] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:23:57.449] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:23:57.449] data.LB_FadeInType0=100 [2025-09-23 15:23:57.449] data.CHLH_FadeInType0=0 [2025-09-23 15:23:57.449] data.WU_FadeInDelay=0 [2025-09-23 15:23:57.449] max_time_out=0 [2025-09-23 15:23:57.449] No splash screen [2025-09-23 15:23:57.449] stop dss Done [2025-09-23 15:23:57.449] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:23:57.538] /dev/mem opened. [2025-09-23 15:23:57.538] Memory mapped at address 0xffffbed62000. [2025-09-23 15:23:57.538] Read at address 0x00600018 (0xffffbed62018): 0x00000000 [2025-09-23 15:23:57.538] Write at address 0x00600018 (0xffffbed62018): 0x00400040, readback 0x00400040 [2025-09-23 15:23:57.538] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:23:57.538] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:23:57.617] Loaded PowerVR consumer services. [2025-09-23 15:23:57.778] 512+0 records in [2025-09-23 15:23:57.778] 512+0 records out [2025-09-23 15:23:57.794] Waiting data available... [2025-09-23 15:23:57.809] Starting syslogd/klogd: done [2025-09-23 15:23:57.825] DML Start [2025-09-23 15:23:58.033] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:23:58.273] DML res1: 0 [2025-09-23 15:23:58.608] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:23:58.624] Read Success [2025-09-23 15:23:58.624] Verifying certificate... [2025-09-23 15:23:58.880] Verified OK [2025-09-23 15:23:58.896] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:24:00.536] Verified OK [2025-09-23 15:24:00.536] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:24:01.203] Verified OK [2025-09-23 15:24:01.203] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:24:03.856] fs.protected_hardlinks = 1 [2025-09-23 15:24:03.856] fs.protected_symlinks = 1 [2025-09-23 15:24:03.872] kernel.modules_disabled = 1 [2025-09-23 15:24:04.065] [2025-09-23 15:24:04.065] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:24:05.359] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:24:13.065] SBL1:1210.0.1.0 [2025-09-23 15:24:13.113] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:24:14.680] SBL2:1210.0.1.0 [2025-09-23 15:24:14.728] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:24:14.823] j-A [2025-09-23 15:24:22.178] The R5 Autosar Classic is running [2025-09-23 15:24:22.203] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:24:22.203] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:24:22.811] INIT: version 2.96 booting [2025-09-23 15:24:22.922] INIT: Entering runlevel: 5 [2025-09-23 15:24:23.215] mtd28 attached [2025-09-23 15:24:23.215] mtd32 attached [2025-09-23 15:24:23.215] mtd24 attached [2025-09-23 15:24:23.215] RTNETLINK answers: File exists [2025-09-23 15:24:23.215] ubi0:animations is mounted. [2025-09-23 15:24:23.215] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:24:23.215] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:24:23.215] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:24:23.215] ubi1:dml_code is mounted. [2025-09-23 15:24:23.215] ubi2:textures is mounted. [2025-09-23 15:24:23.215] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:24:23.215] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:24:23.215] data.LB_FadeInType0=100 [2025-09-23 15:24:23.215] data.CHLH_FadeInType0=0 [2025-09-23 15:24:23.215] data.WU_FadeInDelay=0 [2025-09-23 15:24:23.215] max_time_out=0 [2025-09-23 15:24:23.215] No splash screen [2025-09-23 15:24:23.215] stop dss Done [2025-09-23 15:24:23.259] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:24:23.259] /dev/mem opened. [2025-09-23 15:24:23.291] Memory mapped at address 0xffff8b801000. [2025-09-23 15:24:23.291] Read at address 0x00600018 (0xffff8b801018): 0x00000000 [2025-09-23 15:24:23.291] Write at address 0x00600018 (0xffff8b801018): 0x00400040, readback 0x00400040 [2025-09-23 15:24:23.291] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:24:23.371] Loaded PowerVR consumer services. [2025-09-23 15:24:23.544] 512+0 records in [2025-09-23 15:24:23.544] 512+0 records out [2025-09-23 15:24:23.544] Waiting data available... [2025-09-23 15:24:23.560] Starting syslogd/klogd: done [2025-09-23 15:24:23.576] DML Start [2025-09-23 15:24:23.768] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:24:23.976] DML res1: 0 [2025-09-23 15:24:24.439] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:24:24.439] Read Success [2025-09-23 15:24:24.439] Verifying certificate... [2025-09-23 15:24:24.678] Verified OK [2025-09-23 15:24:24.694] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:24:26.460] Verified OK [2025-09-23 15:24:26.460] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:24:27.019] Verified OK [2025-09-23 15:24:27.039] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:24:29.501] fs.protected_hardlinks = 1 [2025-09-23 15:24:29.501] fs.protected_symlinks = 1 [2025-09-23 15:24:29.501] kernel.modules_disabled = 1 [2025-09-23 15:24:29.676] [2025-09-23 15:24:29.676] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:24:31.078] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:24:38.852] SBL1:1210.0.1.0 [2025-09-23 15:24:38.900] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:24:40.467] SBL2:1210.0.1.0 [2025-09-23 15:24:40.515] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:24:40.611] j-A [2025-09-23 15:24:47.966] The R5 Autosar Classic is running [2025-09-23 15:24:47.989] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:24:47.989] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:24:48.597] INIT: version 2.96 booting [2025-09-23 15:24:48.708] INIT: Entering runlevel: 5 [2025-09-23 15:24:48.868] mtd28 attached [2025-09-23 15:24:48.868] mtd24 attached [2025-09-23 15:24:48.900] mtd32 attached [2025-09-23 15:24:48.932] RTNETLINK answers: File exists [2025-09-23 15:24:48.932] ubi0:animations is mounted. [2025-09-23 15:24:48.992] ubi1:textures is mounted. [2025-09-23 15:24:48.992] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:24:48.992] ubi2:dml_code is mounted. [2025-09-23 15:24:48.992] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:24:48.992] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:24:48.992] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:24:48.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:24:48.992] data.LB_FadeInType0=100 [2025-09-23 15:24:48.992] data.CHLH_FadeInType0=0 [2025-09-23 15:24:48.992] data.WU_FadeInDelay=0 [2025-09-23 15:24:48.992] max_time_out=0 [2025-09-23 15:24:48.992] No splash screen [2025-09-23 15:24:48.992] stop dss Done [2025-09-23 15:24:49.055] /dev/mem opened. [2025-09-23 15:24:49.055] Memory mapped at address 0xffff9d639000. [2025-09-23 15:24:49.087] Read at address 0x00600018 (0xffff9d639018): 0x00000000 [2025-09-23 15:24:49.087] Write at address 0x00600018 (0xffff9d639018): 0x00400040, readback 0x00400040 [2025-09-23 15:24:49.087] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:24:49.087] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:24:49.264] Loaded PowerVR consumer services. [2025-09-23 15:24:49.312] Waiting data available... [2025-09-23 15:24:49.328] 512+0 records in [2025-09-23 15:24:49.328] 512+0 records out [2025-09-23 15:24:49.343] Starting syslogd/klogd: done [2025-09-23 15:24:49.360] DML Start [2025-09-23 15:24:49.551] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:24:49.775] DML res1: 0 [2025-09-23 15:24:50.251] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:24:50.251] Read Success [2025-09-23 15:24:50.251] Verifying certificate... [2025-09-23 15:24:50.490] Verified OK [2025-09-23 15:24:50.507] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:24:52.218] Verified OK [2025-09-23 15:24:52.218] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:24:52.825] Verified OK [2025-09-23 15:24:52.825] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:24:55.491] fs.protected_hardlinks = 1 [2025-09-23 15:24:55.491] fs.protected_symlinks = 1 [2025-09-23 15:24:55.491] kernel.modules_disabled = 1 [2025-09-23 15:24:55.682] [2025-09-23 15:24:55.698] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:24:56.895] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:25:04.617] SBL1:1210.0.1.0 [2025-09-23 15:25:04.665] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:25:06.231] SBL2:1210.0.1.0 [2025-09-23 15:25:06.279] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:25:06.392] j-A [2025-09-23 15:25:13.748] The R5 Autosar Classic is running [2025-09-23 15:25:13.756] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:25:13.756] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:25:14.363] INIT: version 2.96 booting [2025-09-23 15:25:14.475] INIT: Entering runlevel: 5 [2025-09-23 15:25:14.635] mtd28 attached [2025-09-23 15:25:14.635] mtd32 attached [2025-09-23 15:25:14.749] mtd24 attached [2025-09-23 15:25:14.750] ubi0:animations is mounted. [2025-09-23 15:25:14.750] RTNETLINK answers: File exists [2025-09-23 15:25:14.750] ubi2:textures is mounted. [2025-09-23 15:25:14.750] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:25:14.750] ubi1:dml_code is mounted. [2025-09-23 15:25:14.750] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:25:14.750] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:25:14.750] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:25:14.750] data.LB_FadeInType0=100 [2025-09-23 15:25:14.769] data.CHLH_FadeInType0=0 [2025-09-23 15:25:14.769] data.WU_FadeInDelay=0 [2025-09-23 15:25:14.769] max_time_out=0 [2025-09-23 15:25:14.769] No splash screen [2025-09-23 15:25:14.769] stop dss Done [2025-09-23 15:25:14.769] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:25:14.801] /dev/mem opened. [2025-09-23 15:25:14.801] Memory mapped at address 0xffff98977000. [2025-09-23 15:25:14.827] Read at address 0x00600018 (0xffff98977018): 0x00000000 [2025-09-23 15:25:14.827] Write at address 0x00600018 (0xffff98977018): 0x00400040, readback 0x00400040 [2025-09-23 15:25:14.843] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:25:14.843] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:25:14.939] Loaded PowerVR consumer services. [2025-09-23 15:25:15.083] 512+0 records in [2025-09-23 15:25:15.083] 512+0 records out [2025-09-23 15:25:15.083] Waiting data available... [2025-09-23 15:25:15.114] Starting syslogd/klogd: done [2025-09-23 15:25:15.131] DML Start [2025-09-23 15:25:15.323] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:25:15.515] DML res1: 0 [2025-09-23 15:25:16.010] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:25:16.032] Read Success [2025-09-23 15:25:16.032] Verifying certificate... [2025-09-23 15:25:16.272] Verified OK [2025-09-23 15:25:16.288] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:25:18.085] Verified OK [2025-09-23 15:25:18.085] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:25:18.642] Verified OK [2025-09-23 15:25:18.642] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:25:21.071] fs.protected_hardlinks = 1 [2025-09-23 15:25:21.087] fs.protected_symlinks = 1 [2025-09-23 15:25:21.087] kernel.modules_disabled = 1 [2025-09-23 15:25:21.279] [2025-09-23 15:25:21.279] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:25:22.599] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:25:30.396] SBL1:1210.0.1.0 [2025-09-23 15:25:30.445] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:25:32.011] SBL2:1210.0.1.0 [2025-09-23 15:25:32.059] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:25:32.155] j-A [2025-09-23 15:25:39.510] The R5 Autosar Classic is running [2025-09-23 15:25:39.535] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:25:39.535] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:25:40.142] INIT: version 2.96 booting [2025-09-23 15:25:40.255] INIT: Entering runlevel: 5 [2025-09-23 15:25:40.398] mtd24 attached [2025-09-23 15:25:40.549] mtd28 attached [2025-09-23 15:25:40.550] mtd32 attached [2025-09-23 15:25:40.550] ubi0:textures is mounted. [2025-09-23 15:25:40.550] ubi1:animations is mounted. [2025-09-23 15:25:40.550] RTNETLINK answers: File exists [2025-09-23 15:25:40.550] ubi2:dml_code is mounted. [2025-09-23 15:25:40.550] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:25:40.550] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:25:40.550] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:25:40.550] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:25:40.550] data.LB_FadeInType0=100 [2025-09-23 15:25:40.550] data.CHLH_FadeInType0=0 [2025-09-23 15:25:40.550] data.WU_FadeInDelay=0 [2025-09-23 15:25:40.550] max_time_out=0 [2025-09-23 15:25:40.550] No splash screen [2025-09-23 15:25:40.550] stop dss Done [2025-09-23 15:25:40.550] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:25:40.570] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:25:40.612] /dev/mem opened. [2025-09-23 15:25:40.612] Memory mapped at address 0xffffbe075000. [2025-09-23 15:25:40.612] Read at address 0x00600018 (0xffffbe075018): 0x00000000 [2025-09-23 15:25:40.612] Write at address 0x00600018 (0xffffbe075018): 0x00400040, readback 0x00400040 [2025-09-23 15:25:40.612] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:25:40.739] Loaded PowerVR consumer services. [2025-09-23 15:25:40.851] Waiting data available... [2025-09-23 15:25:40.867] 512+0 records in [2025-09-23 15:25:40.867] 512+0 records out [2025-09-23 15:25:40.915] Starting syslogd/klogd: done [2025-09-23 15:25:40.931] DML Start [2025-09-23 15:25:41.123] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:25:41.315] DML res1: 0 [2025-09-23 15:25:41.783] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:25:41.783] Read Success [2025-09-23 15:25:41.783] Verifying certificate... [2025-09-23 15:25:42.094] Verified OK [2025-09-23 15:25:42.094] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:25:43.728] Verified OK [2025-09-23 15:25:43.728] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:25:44.295] Verified OK [2025-09-23 15:25:44.295] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:25:46.805] fs.protected_hardlinks = 1 [2025-09-23 15:25:46.831] fs.protected_symlinks = 1 [2025-09-23 15:25:46.831] kernel.modules_disabled = 1 [2025-09-23 15:25:47.013] [2025-09-23 15:25:47.013] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:25:48.435] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:25:56.202] SBL1:1210.0.1.0 [2025-09-23 15:25:56.250] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 15:25:57.816] SBL2:1210.0.1.0 [2025-09-23 15:25:57.865] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:25:57.976] j-A [2025-09-23 15:26:05.315] The R5 Autosar Classic is running [2025-09-23 15:26:05.341] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:26:05.341] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:26:05.948] INIT: version 2.96 booting [2025-09-23 15:26:06.059] INIT: Entering runlevel: 5 [2025-09-23 15:26:06.203] mtd24 attached [2025-09-23 15:26:06.219] mtd32 attached [2025-09-23 15:26:06.252] ubi0:textures is mounted. [2025-09-23 15:26:06.389] ubi1:dml_code is mounted. [2025-09-23 15:26:06.389] mtd28 attached [2025-09-23 15:26:06.390] RTNETLINK answers: File exists [2025-09-23 15:26:06.390] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:26:06.390] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:26:06.390] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:26:06.390] ubi2:animations is mounted. [2025-09-23 15:26:06.390] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:26:06.390] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:26:06.390] data.LB_FadeInType0=100 [2025-09-23 15:26:06.390] data.CHLH_FadeInType0=0 [2025-09-23 15:26:06.390] data.WU_FadeInDelay=0 [2025-09-23 15:26:06.390] max_time_out=0 [2025-09-23 15:26:06.390] No splash screen [2025-09-23 15:26:06.390] stop dss Done [2025-09-23 15:26:06.417] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:26:06.417] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:26:06.417] /dev/mem opened. [2025-09-23 15:26:06.417] Memory mapped at address 0xffffa1a27000. [2025-09-23 15:26:06.417] Read at address 0x00600018 (0xffffa1a27018): 0x00000000 [2025-09-23 15:26:06.417] Write at address 0x00600018 (0xffffa1a27018): 0x00400040, readback 0x00400040 [2025-09-23 15:26:06.546] Loaded PowerVR consumer services. [2025-09-23 15:26:06.681] Waiting data available... [2025-09-23 15:26:06.681] 512+0 records in [2025-09-23 15:26:06.681] 512+0 records out [2025-09-23 15:26:06.697] Starting syslogd/klogd: done [2025-09-23 15:26:06.713] DML Start [2025-09-23 15:26:06.874] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:26:07.066] DML res1: 0 [2025-09-23 15:26:07.557] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:26:07.557] Read Success [2025-09-23 15:26:07.557] Verifying certificate... [2025-09-23 15:26:07.812] Verified OK [2025-09-23 15:26:07.828] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:26:09.442] Verified OK [2025-09-23 15:26:09.442] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:26:10.106] Verified OK [2025-09-23 15:26:10.106] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:26:12.791] fs.protected_hardlinks = 1 [2025-09-23 15:26:12.791] fs.protected_symlinks = 1 [2025-09-23 15:26:12.807] kernel.modules_disabled = 1 [2025-09-23 15:26:12.999] [2025-09-23 15:26:12.999] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:26:14.211] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:26:21.997] SBL1:1210.0.1.0 [2025-09-23 15:26:22.029] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:26:23.611] SBL2:1210.0.1.0 [2025-09-23 15:26:23.645] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:26:23.755] j-A [2025-09-23 15:26:31.126] The R5 Autosar Classic is running [2025-09-23 15:26:31.126] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:26:31.127] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:26:31.734] INIT: version 2.96 booting [2025-09-23 15:26:31.845] INIT: Entering runlevel: 5 [2025-09-23 15:26:32.145] mtd24 attached [2025-09-23 15:26:32.145] mtd28 attached [2025-09-23 15:26:32.145] mtd32 attached [2025-09-23 15:26:32.145] ubi0:textures is mounted. [2025-09-23 15:26:32.145] RTNETLINK answers: File exists [2025-09-23 15:26:32.145] ubi1:animations is mounted. [2025-09-23 15:26:32.145] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:26:32.145] ubi2:dml_code is mounted. [2025-09-23 15:26:32.145] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:26:32.145] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:26:32.145] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:26:32.145] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:26:32.145] data.LB_FadeInType0=100 [2025-09-23 15:26:32.145] data.CHLH_FadeInType0=0 [2025-09-23 15:26:32.145] data.WU_FadeInDelay=0 [2025-09-23 15:26:32.145] max_time_out=0 [2025-09-23 15:26:32.145] No splash screen [2025-09-23 15:26:32.145] stop dss Done [2025-09-23 15:26:32.203] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:26:32.203] /dev/mem opened. [2025-09-23 15:26:32.203] Memory mapped at address 0xffff93a50000. [2025-09-23 15:26:32.203] Read at address 0x00600018 (0xffff93a50018): 0x00000000 [2025-09-23 15:26:32.203] Write at address 0x00600018 (0xffff93a50018): 0x00400040, readback 0x00400040 [2025-09-23 15:26:32.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:26:32.299] Loaded PowerVR consumer services. [2025-09-23 15:26:32.455] 512+0 records in [2025-09-23 15:26:32.455] 512+0 records out [2025-09-23 15:26:32.455] Waiting data available... [2025-09-23 15:26:32.471] Starting syslogd/klogd: done [2025-09-23 15:26:32.487] DML Start [2025-09-23 15:26:32.679] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:26:33.160] DML res1: 0 [2025-09-23 15:26:33.367] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:26:33.383] Read Success [2025-09-23 15:26:33.383] Verifying certificate... [2025-09-23 15:26:33.607] Verified OK [2025-09-23 15:26:33.623] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:26:35.389] Verified OK [2025-09-23 15:26:35.389] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:26:35.992] Verified OK [2025-09-23 15:26:35.992] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:26:38.645] fs.protected_hardlinks = 1 [2025-09-23 15:26:38.645] fs.protected_symlinks = 1 [2025-09-23 15:26:38.661] kernel.modules_disabled = 1 [2025-09-23 15:26:38.853] [2025-09-23 15:26:38.853] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:26:39.961] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:26:47.793] SBL1:1210.0.1.0 [2025-09-23 15:26:47.824] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:26:49.408] SBL2:1210.0.1.0 [2025-09-23 15:26:49.439] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:26:49.551] j-A [2025-09-23 15:26:56.926] The R5 Autosar Classic is running [2025-09-23 15:26:56.926] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:26:56.926] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:26:57.534] INIT: version 2.96 booting [2025-09-23 15:26:57.629] INIT: Entering runlevel: 5 [2025-09-23 15:26:57.975] mtd32 attached [2025-09-23 15:26:57.975] mtd24 attached [2025-09-23 15:26:57.975] mtd28 attached [2025-09-23 15:26:57.975] RTNETLINK answers: File exists [2025-09-23 15:26:57.975] ubi0:dml_code is mounted. [2025-09-23 15:26:57.975] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:26:57.975] ubi1:textures is mounted. [2025-09-23 15:26:57.975] ubi2:animations is mounted. [2025-09-23 15:26:57.975] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:26:57.975] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:26:57.975] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:26:57.975] data.LB_FadeInType0=100 [2025-09-23 15:26:57.975] data.CHLH_FadeInType0=0 [2025-09-23 15:26:57.975] data.WU_FadeInDelay=0 [2025-09-23 15:26:57.975] max_time_out=0 [2025-09-23 15:26:57.975] No splash screen [2025-09-23 15:26:57.975] stop dss Done [2025-09-23 15:26:57.975] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:26:57.975] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:26:58.015] /dev/mem opened. [2025-09-23 15:26:58.015] Memory mapped at address 0xffff94a8b000. [2025-09-23 15:26:58.015] Read at address 0x00600018 (0xffff94a8b018): 0x00000000 [2025-09-23 15:26:58.015] Write at address 0x00600018 (0xffff94a8b018): 0x00400040, readback 0x00400040 [2025-09-23 15:26:58.015] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:26:58.079] Loaded PowerVR consumer services. [2025-09-23 15:26:58.223] 512+0 records in [2025-09-23 15:26:58.223] 512+0 records out [2025-09-23 15:26:58.255] Waiting data available... [2025-09-23 15:26:58.255] Starting syslogd/klogd: done [2025-09-23 15:26:58.271] DML Start [2025-09-23 15:26:58.463] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:26:58.687] DML res1: 0 [2025-09-23 15:26:59.162] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:26:59.162] Read Success [2025-09-23 15:26:59.162] Verifying certificate... [2025-09-23 15:26:59.434] Verified OK [2025-09-23 15:26:59.450] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:27:01.049] Verified OK [2025-09-23 15:27:01.070] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:27:01.709] Verified OK [2025-09-23 15:27:01.709] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:27:04.331] fs.protected_hardlinks = 1 [2025-09-23 15:27:04.331] fs.protected_symlinks = 1 [2025-09-23 15:27:04.347] kernel.modules_disabled = 1 [2025-09-23 15:27:04.539] [2025-09-23 15:27:04.539] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:27:05.752] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:27:13.586] SBL1:1210.0.1.0 [2025-09-23 15:27:13.617] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:27:15.199] SBL2:1210.0.1.0 [2025-09-23 15:27:15.243] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 15:27:15.344] j-A [2025-09-23 15:27:22.715] The R5 Autosar Classic is running [2025-09-23 15:27:22.715] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:27:22.715] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:27:23.322] INIT: version 2.96 booting [2025-09-23 15:27:23.434] INIT: Entering runlevel: 5 [2025-09-23 15:27:23.743] mtd24 attached [2025-09-23 15:27:23.743] mtd28 attached [2025-09-23 15:27:23.743] mtd32 attached [2025-09-23 15:27:23.743] ubi0:textures is mounted. [2025-09-23 15:27:23.743] RTNETLINK answers: File exists [2025-09-23 15:27:23.743] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:27:23.743] ubi1:animations is mounted. [2025-09-23 15:27:23.743] ubi2:dml_code is mounted. [2025-09-23 15:27:23.743] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:27:23.743] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:27:23.743] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:27:23.743] data.LB_FadeInType0=100 [2025-09-23 15:27:23.743] data.CHLH_FadeInType0=0 [2025-09-23 15:27:23.743] data.WU_FadeInDelay=0 [2025-09-23 15:27:23.743] max_time_out=0 [2025-09-23 15:27:23.743] No splash screen [2025-09-23 15:27:23.743] stop dss Done [2025-09-23 15:27:23.743] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:27:23.761] /dev/mem opened. [2025-09-23 15:27:23.761] Memory mapped at address 0xffffa1c68000. [2025-09-23 15:27:23.793] Read at address 0x00600018 (0xffffa1c68018): 0x00000000 [2025-09-23 15:27:23.793] Write at address 0x00600018 (0xffffa1c68018): 0x00400040, readback 0x00400040 [2025-09-23 15:27:23.793] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:27:23.793] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:27:24.017] Loaded PowerVR consumer services. [2025-09-23 15:27:24.095] Waiting data available... [2025-09-23 15:27:24.095] 512+0 records in [2025-09-23 15:27:24.095] 512+0 records out [2025-09-23 15:27:24.127] Starting syslogd/klogd: done [2025-09-23 15:27:24.143] DML Start [2025-09-23 15:27:24.334] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:27:24.574] DML res1: 0 [2025-09-23 15:27:25.019] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:27:25.019] Read Success [2025-09-23 15:27:25.019] Verifying certificate... [2025-09-23 15:27:25.258] Verified OK [2025-09-23 15:27:25.258] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:27:26.962] Verified OK [2025-09-23 15:27:26.962] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:27:27.481] Verified OK [2025-09-23 15:27:27.481] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:27:30.007] fs.protected_hardlinks = 1 [2025-09-23 15:27:30.007] fs.protected_symlinks = 1 [2025-09-23 15:27:30.023] kernel.modules_disabled = 1 [2025-09-23 15:27:30.231] [2025-09-23 15:27:30.231] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:27:31.657] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:27:39.410] SBL1:1210.0.1.0 [2025-09-23 15:27:39.458] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:27:41.024] SBL2:1210.0.1.0 [2025-09-23 15:27:41.073] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 15:27:41.169] j-A [2025-09-23 15:27:48.522] The R5 Autosar Classic is running [2025-09-23 15:27:48.543] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:27:48.543] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:27:49.151] INIT: version 2.96 booting [2025-09-23 15:27:49.262] INIT: Entering runlevel: 5 [2025-09-23 15:27:49.407] mtd24 attached [2025-09-23 15:27:49.423] mtd32 attached [2025-09-23 15:27:49.439] mtd28 attached [2025-09-23 15:27:49.471] ubi0:textures is mounted. [2025-09-23 15:27:49.487] RTNETLINK answers: File exists [2025-09-23 15:27:49.544] ubi2:animations is mounted. [2025-09-23 15:27:49.544] ubi1:dml_code is mounted. [2025-09-23 15:27:49.544] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:27:49.544] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:27:49.544] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:27:49.544] data.LB_FadeInType0=100 [2025-09-23 15:27:49.544] data.CHLH_FadeInType0=0 [2025-09-23 15:27:49.544] data.WU_FadeInDelay=0 [2025-09-23 15:27:49.544] max_time_out=0 [2025-09-23 15:27:49.544] No splash screen [2025-09-23 15:27:49.544] stop dss Done [2025-09-23 15:27:49.544] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:27:49.544] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:27:49.600] /dev/mem opened. [2025-09-23 15:27:49.600] Memory mapped at address 0xffffa3f58000. [2025-09-23 15:27:49.600] Read at address 0x00600018 (0xffffa3f58018): 0x00000000 [2025-09-23 15:27:49.600] Write at address 0x00600018 (0xffffa3f58018): 0x00400040, readback 0x00400040 [2025-09-23 15:27:49.616] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:27:49.633] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:27:49.711] Loaded PowerVR consumer services. [2025-09-23 15:27:49.856] Waiting data available... [2025-09-23 15:27:49.888] 512+0 records in [2025-09-23 15:27:49.888] 512+0 records out [2025-09-23 15:27:49.919] Starting syslogd/klogd: done [2025-09-23 15:27:49.935] DML Start [2025-09-23 15:27:50.111] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:27:50.319] DML res1: 0 [2025-09-23 15:27:50.783] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:27:50.783] Read Success [2025-09-23 15:27:51.008] Verifying certificate... [2025-09-23 15:27:51.022] Verified OK [2025-09-23 15:27:51.038] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:27:52.680] Verified OK [2025-09-23 15:27:52.680] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:27:53.298] Verified OK [2025-09-23 15:27:53.298] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:27:56.000] fs.protected_hardlinks = 1 [2025-09-23 15:27:56.000] fs.protected_symlinks = 1 [2025-09-23 15:27:56.016] kernel.modules_disabled = 1 [2025-09-23 15:27:56.208] [2025-09-23 15:27:56.208] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:27:57.452] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:28:05.147] SBL1:1210.0.1.0 [2025-09-23 15:28:05.195] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:28:06.761] SBL2:1210.0.1.0 [2025-09-23 15:28:06.809] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:28:06.905] j-A [2025-09-23 15:28:14.258] The R5 Autosar Classic is running [2025-09-23 15:28:14.282] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:28:14.282] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:28:14.889] INIT: version 2.96 booting [2025-09-23 15:28:15.001] INIT: Entering runlevel: 5 [2025-09-23 15:28:15.145] mtd24 attached [2025-09-23 15:28:15.161] mtd28 attached [2025-09-23 15:28:15.177] mtd32 attached [2025-09-23 15:28:15.316] ubi0:textures is mounted. [2025-09-23 15:28:15.317] RTNETLINK answers: File exists [2025-09-23 15:28:15.317] ubi1:animations is mounted. [2025-09-23 15:28:15.317] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:28:15.317] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:28:15.317] ubi2:dml_code is mounted. [2025-09-23 15:28:15.317] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:28:15.317] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:28:15.317] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:28:15.317] data.LB_FadeInType0=100 [2025-09-23 15:28:15.317] data.CHLH_FadeInType0=0 [2025-09-23 15:28:15.317] data.WU_FadeInDelay=0 [2025-09-23 15:28:15.317] max_time_out=0 [2025-09-23 15:28:15.317] No splash screen [2025-09-23 15:28:15.317] stop dss Done [2025-09-23 15:28:15.325] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:28:15.365] /dev/mem opened. [2025-09-23 15:28:15.365] Memory mapped at address 0xffffa55e6000. [2025-09-23 15:28:15.365] Read at address 0x00600018 (0xffffa55e6018): 0x00000000 [2025-09-23 15:28:15.365] Write at address 0x00600018 (0xffffa55e6018): 0x00400040, readback 0x00400040 [2025-09-23 15:28:15.365] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:28:15.605] Loaded PowerVR consumer services. [2025-09-23 15:28:15.637] Waiting data available... [2025-09-23 15:28:15.653] 512+0 records in [2025-09-23 15:28:15.653] 512+0 records out [2025-09-23 15:28:15.668] Starting syslogd/klogd: done [2025-09-23 15:28:15.684] DML Start [2025-09-23 15:28:15.861] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:28:16.085] DML res1: 0 [2025-09-23 15:28:16.548] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:28:16.548] Read Success [2025-09-23 15:28:16.548] Verifying certificate... [2025-09-23 15:28:16.803] Verified OK [2025-09-23 15:28:16.819] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:28:18.606] Verified OK [2025-09-23 15:28:18.606] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:28:19.141] Verified OK [2025-09-23 15:28:19.141] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:28:21.603] fs.protected_hardlinks = 1 [2025-09-23 15:28:21.619] fs.protected_symlinks = 1 [2025-09-23 15:28:21.619] kernel.modules_disabled = 1 [2025-09-23 15:28:21.828] [2025-09-23 15:28:21.828] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:28:23.198] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:28:30.920] SBL1:1210.0.1.0 [2025-09-23 15:28:30.952] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:28:32.534] SBL2:1210.0.1.0 [2025-09-23 15:28:32.566] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:28:32.679] j-A [2025-09-23 15:28:40.050] The R5 Autosar Classic is running [2025-09-23 15:28:40.050] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:28:40.050] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:28:40.658] INIT: version 2.96 booting [2025-09-23 15:28:41.105] INIT: Entering runlevel: 5 [2025-09-23 15:28:41.106] mtd24 attached [2025-09-23 15:28:41.106] mtd28 attached [2025-09-23 15:28:41.106] mtd32 attached [2025-09-23 15:28:41.106] ubi0:textures is mounted. [2025-09-23 15:28:41.106] RTNETLINK answers: File exists [2025-09-23 15:28:41.106] ubi2:dml_code is mounted. [2025-09-23 15:28:41.106] ubi1:animations is mounted. [2025-09-23 15:28:41.106] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:28:41.106] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:28:41.106] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:28:41.106] data.LB_FadeInType0=100 [2025-09-23 15:28:41.106] data.CHLH_FadeInType0=0 [2025-09-23 15:28:41.106] data.WU_FadeInDelay=0 [2025-09-23 15:28:41.106] max_time_out=0 [2025-09-23 15:28:41.106] No splash screen [2025-09-23 15:28:41.106] stop dss Done [2025-09-23 15:28:41.106] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:28:41.106] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:28:41.120] /dev/mem opened. [2025-09-23 15:28:41.120] Memory mapped at address 0xffffa494a000. [2025-09-23 15:28:41.120] Read at address 0x00600018 (0xffffa494a018): 0x00000000 [2025-09-23 15:28:41.120] Write at address 0x00600018 (0xffffa494a018): 0x00400040, readback 0x00400040 [2025-09-23 15:28:41.120] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:28:41.135] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:28:41.312] Loaded PowerVR consumer services. [2025-09-23 15:28:41.388] Waiting data available... [2025-09-23 15:28:41.388] 512+0 records in [2025-09-23 15:28:41.388] 512+0 records out [2025-09-23 15:28:41.404] Starting syslogd/klogd: done [2025-09-23 15:28:41.420] DML Start [2025-09-23 15:28:41.595] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:28:41.803] DML res1: 0 [2025-09-23 15:28:42.297] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:28:42.297] Read Success [2025-09-23 15:28:42.297] Verifying certificate... [2025-09-23 15:28:42.569] Verified OK [2025-09-23 15:28:42.585] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:28:44.053] Verified OK [2025-09-23 15:28:44.053] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:28:44.687] Verified OK [2025-09-23 15:28:44.687] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:28:47.388] fs.protected_hardlinks = 1 [2025-09-23 15:28:47.388] fs.protected_symlinks = 1 [2025-09-23 15:28:47.404] kernel.modules_disabled = 1 [2025-09-23 15:28:47.596] [2025-09-23 15:28:47.596] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:28:48.919] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:28:56.712] SBL1:1210.0.1.0 [2025-09-23 15:28:56.744] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:28:58.328] SBL2:1210.0.1.0 [2025-09-23 15:28:58.360] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:28:58.472] j-A [2025-09-23 15:29:05.844] The R5 Autosar Classic is running [2025-09-23 15:29:05.844] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:29:05.844] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:29:06.451] INIT: version 2.96 booting [2025-09-23 15:29:06.563] INIT: Entering runlevel: 5 [2025-09-23 15:29:06.707] mtd24 attached [2025-09-23 15:29:06.723] mtd28 attached [2025-09-23 15:29:06.739] mtd32 attached [2025-09-23 15:29:06.840] RTNETLINK answers: File exists [2025-09-23 15:29:06.840] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:29:06.840] ubi0:textures is mounted. [2025-09-23 15:29:06.840] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:29:06.840] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:29:06.840] ubi2:dml_code is mounted. [2025-09-23 15:29:06.840] ubi1:animations is mounted. [2025-09-23 15:29:06.840] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:29:06.840] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:29:06.840] data.LB_FadeInType0=100 [2025-09-23 15:29:06.840] data.CHLH_FadeInType0=0 [2025-09-23 15:29:06.840] data.WU_FadeInDelay=0 [2025-09-23 15:29:06.840] max_time_out=0 [2025-09-23 15:29:06.840] No splash screen [2025-09-23 15:29:06.840] stop dss Done [2025-09-23 15:29:06.855] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:29:06.871] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:29:06.887] /dev/mem opened. [2025-09-23 15:29:06.887] Memory mapped at address 0xffffad615000. [2025-09-23 15:29:06.913] Read at address 0x00600018 (0xffffad615018): 0x00000000 [2025-09-23 15:29:06.913] Write at address 0x00600018 (0xffffad615018): 0x00400040, readback 0x00400040 [2025-09-23 15:29:07.170] Loaded PowerVR consumer services. [2025-09-23 15:29:07.186] Waiting data available... [2025-09-23 15:29:07.202] 512+0 records in [2025-09-23 15:29:07.202] 512+0 records out [2025-09-23 15:29:07.249] Starting syslogd/klogd: done [2025-09-23 15:29:07.265] DML Start [2025-09-23 15:29:07.409] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:29:07.585] DML res1: 0 [2025-09-23 15:29:08.113] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:29:08.129] Read Success [2025-09-23 15:29:08.129] Verifying certificate... [2025-09-23 15:29:08.368] Verified OK [2025-09-23 15:29:08.368] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:29:10.057] Verified OK [2025-09-23 15:29:10.057] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:29:10.681] Verified OK [2025-09-23 15:29:10.681] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:29:13.287] fs.protected_hardlinks = 1 [2025-09-23 15:29:13.303] fs.protected_symlinks = 1 [2025-09-23 15:29:13.319] kernel.modules_disabled = 1 [2025-09-23 15:29:13.510] [2025-09-23 15:29:13.510] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:29:14.707] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:29:22.456] SBL1:1210.0.1.0 [2025-09-23 15:29:22.504] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:29:24.070] SBL2:1210.0.1.0 [2025-09-23 15:29:24.118] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:29:24.215] j-A [2025-09-23 15:29:31.569] The R5 Autosar Classic is running [2025-09-23 15:29:31.594] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:29:31.594] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:29:32.201] INIT: version 2.96 booting [2025-09-23 15:29:32.312] INIT: Entering runlevel: 5 [2025-09-23 15:29:32.472] mtd24 attached [2025-09-23 15:29:32.472] mtd28 attached [2025-09-23 15:29:32.488] mtd32 attached [2025-09-23 15:29:32.536] ubi0:textures is mounted. [2025-09-23 15:29:32.536] RTNETLINK answers: File exists [2025-09-23 15:29:32.593] ubi1:animations is mounted. [2025-09-23 15:29:32.593] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:29:32.593] ubi2:dml_code is mounted. [2025-09-23 15:29:32.593] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:29:32.593] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:29:32.593] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:29:32.593] data.LB_FadeInType0=100 [2025-09-23 15:29:32.593] data.CHLH_FadeInType0=0 [2025-09-23 15:29:32.593] data.WU_FadeInDelay=0 [2025-09-23 15:29:32.593] max_time_out=0 [2025-09-23 15:29:32.593] No splash screen [2025-09-23 15:29:32.593] stop dss Done [2025-09-23 15:29:32.593] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:29:32.642] /dev/mem opened. [2025-09-23 15:29:32.642] Memory mapped at address 0xffffa87ad000. [2025-09-23 15:29:32.674] Read at address 0x00600018 (0xffffa87ad018): 0x00000000 [2025-09-23 15:29:32.674] Write at address 0x00600018 (0xffffa87ad018): 0x00400040, readback 0x00400040 [2025-09-23 15:29:32.674] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:29:32.674] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:29:32.897] Loaded PowerVR consumer services. [2025-09-23 15:29:32.913] Waiting data available... [2025-09-23 15:29:32.945] 512+0 records in [2025-09-23 15:29:32.945] 512+0 records out [2025-09-23 15:29:32.993] Starting syslogd/klogd: done [2025-09-23 15:29:33.009] DML Start [2025-09-23 15:29:33.169] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:29:33.425] DML res1: 0 [2025-09-23 15:29:33.854] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:29:33.854] Read Success [2025-09-23 15:29:33.854] Verifying certificate... [2025-09-23 15:29:34.094] Verified OK [2025-09-23 15:29:34.110] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:29:35.841] Verified OK [2025-09-23 15:29:35.841] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:29:36.486] Verified OK [2025-09-23 15:29:36.486] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:29:39.029] fs.protected_hardlinks = 1 [2025-09-23 15:29:39.045] fs.protected_symlinks = 1 [2025-09-23 15:29:39.045] kernel.modules_disabled = 1 [2025-09-23 15:29:39.252] [2025-09-23 15:29:39.252] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:29:40.513] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:29:48.216] SBL1:1210.0.1.0 [2025-09-23 15:29:48.248] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:29:49.831] SBL2:1210.0.1.0 [2025-09-23 15:29:49.863] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:29:49.975] j-A [2025-09-23 15:29:57.349] The R5 Autosar Classic is running [2025-09-23 15:29:57.349] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:29:57.349] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:29:57.956] INIT: version 2.96 booting [2025-09-23 15:29:58.068] INIT: Entering runlevel: 5 [2025-09-23 15:29:58.212] mtd28 attached [2025-09-23 15:29:58.228] mtd24 attached [2025-09-23 15:29:58.244] mtd32 attached [2025-09-23 15:29:58.292] RTNETLINK answers: File exists [2025-09-23 15:29:58.292] ubi0:animations is mounted. [2025-09-23 15:29:58.356] ubi1:textures is mounted. [2025-09-23 15:29:58.356] ubi2:dml_code is mounted. [2025-09-23 15:29:58.356] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:29:58.356] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:29:58.356] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:29:58.356] data.LB_FadeInType0=100 [2025-09-23 15:29:58.356] data.CHLH_FadeInType0=0 [2025-09-23 15:29:58.356] data.WU_FadeInDelay=0 [2025-09-23 15:29:58.356] max_time_out=0 [2025-09-23 15:29:58.356] No splash screen [2025-09-23 15:29:58.356] stop dss Done [2025-09-23 15:29:58.356] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:29:58.356] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:29:58.420] /dev/mem opened. [2025-09-23 15:29:58.420] Memory mapped at address 0xffffab955000. [2025-09-23 15:29:58.420] Read at address 0x00600018 (0xffffab955018): 0x00000000 [2025-09-23 15:29:58.420] Write at address 0x00600018 (0xffffab955018): 0x00400040, readback 0x00400040 [2025-09-23 15:29:58.452] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:29:58.468] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:29:58.549] Loaded PowerVR consumer services. [2025-09-23 15:29:58.699] Waiting data available... [2025-09-23 15:29:58.699] 512+0 records in [2025-09-23 15:29:58.699] 512+0 records out [2025-09-23 15:29:58.730] Starting syslogd/klogd: done [2025-09-23 15:29:58.763] DML Start [2025-09-23 15:29:58.938] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:29:59.195] DML res1: 0 [2025-09-23 15:29:59.566] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:29:59.566] Read Success [2025-09-23 15:29:59.566] Verifying certificate... [2025-09-23 15:29:59.807] Verified OK [2025-09-23 15:29:59.823] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:30:01.389] Verified OK [2025-09-23 15:30:01.389] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:30:02.058] Verified OK [2025-09-23 15:30:02.058] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:30:04.744] fs.protected_hardlinks = 1 [2025-09-23 15:30:04.744] fs.protected_symlinks = 1 [2025-09-23 15:30:04.744] kernel.modules_disabled = 1 [2025-09-23 15:30:05.172] [2025-09-23 15:30:05.172] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:30:06.243] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:30:14.007] SBL1:1210.0.1.0 [2025-09-23 15:30:14.038] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:30:15.622] SBL2:1210.0.1.0 [2025-09-23 15:30:15.659] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:30:15.765] j-A [2025-09-23 15:30:23.138] The R5 Autosar Classic is running [2025-09-23 15:30:23.138] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:30:23.138] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:30:23.745] INIT: version 2.96 booting [2025-09-23 15:30:23.857] INIT: Entering runlevel: 5 [2025-09-23 15:30:24.174] mtd24 attached [2025-09-23 15:30:24.174] mtd28 attached [2025-09-23 15:30:24.174] mtd32 attached [2025-09-23 15:30:24.174] ubi0:textures is mounted. [2025-09-23 15:30:24.174] ubi1:animations is mounted. [2025-09-23 15:30:24.174] RTNETLINK answers: File exists [2025-09-23 15:30:24.174] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:30:24.174] ubi2:dml_code is mounted. [2025-09-23 15:30:24.174] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:30:24.174] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:30:24.174] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:30:24.174] data.LB_FadeInType0=100 [2025-09-23 15:30:24.174] data.CHLH_FadeInType0=0 [2025-09-23 15:30:24.174] data.WU_FadeInDelay=0 [2025-09-23 15:30:24.174] max_time_out=0 [2025-09-23 15:30:24.174] No splash screen [2025-09-23 15:30:24.174] stop dss Done [2025-09-23 15:30:24.174] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:30:24.174] /dev/mem opened. [2025-09-23 15:30:24.174] Memory mapped at address 0xffffa3a89000. [2025-09-23 15:30:24.196] Read at address 0x00600018 (0xffffa3a89018): 0x00000000 [2025-09-23 15:30:24.196] Write at address 0x00600018 (0xffffa3a89018): 0x00400040, readback 0x00400040 [2025-09-23 15:30:24.212] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:30:24.228] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:30:24.324] Loaded PowerVR consumer services. [2025-09-23 15:30:24.480] Waiting data available... [2025-09-23 15:30:24.480] 512+0 records in [2025-09-23 15:30:24.480] 512+0 records out [2025-09-23 15:30:24.512] Starting syslogd/klogd: done [2025-09-23 15:30:24.528] DML Start [2025-09-23 15:30:24.736] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:30:25.173] DML res1: 0 [2025-09-23 15:30:25.339] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:30:25.339] Read Success [2025-09-23 15:30:25.339] Verifying certificate... [2025-09-23 15:30:25.579] Verified OK [2025-09-23 15:30:25.595] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:30:27.152] Verified OK [2025-09-23 15:30:27.152] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:30:27.770] Verified OK [2025-09-23 15:30:27.770] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:30:30.535] fs.protected_hardlinks = 1 [2025-09-23 15:30:30.551] fs.protected_symlinks = 1 [2025-09-23 15:30:30.551] kernel.modules_disabled = 1 [2025-09-23 15:30:30.743] [2025-09-23 15:30:30.743] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:30:32.070] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:30:39.830] SBL1:1210.0.1.0 [2025-09-23 15:30:39.878] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:30:41.444] SBL2:1210.0.1.0 [2025-09-23 15:30:41.476] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:30:41.588] j-A [2025-09-23 15:30:48.943] The R5 Autosar Classic is running [2025-09-23 15:30:48.943] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:30:48.964] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:30:49.572] INIT: version 2.96 booting [2025-09-23 15:30:49.986] INIT: Entering runlevel: 5 [2025-09-23 15:30:49.986] mtd32 attached [2025-09-23 15:30:49.986] mtd28 attached [2025-09-23 15:30:49.986] mtd24 attached [2025-09-23 15:30:49.986] RTNETLINK answers: File exists [2025-09-23 15:30:49.986] ubi1:animations is mounted. [2025-09-23 15:30:49.986] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:30:49.986] ubi0:dml_code is mounted. [2025-09-23 15:30:49.986] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:30:49.986] ubi2:textures is mounted. [2025-09-23 15:30:49.986] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:30:49.986] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:30:49.986] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:30:49.986] data.LB_FadeInType0=100 [2025-09-23 15:30:49.986] data.CHLH_FadeInType0=0 [2025-09-23 15:30:49.986] data.WU_FadeInDelay=0 [2025-09-23 15:30:49.986] max_time_out=0 [2025-09-23 15:30:49.986] No splash screen [2025-09-23 15:30:49.986] stop dss Done [2025-09-23 15:30:50.024] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:30:50.062] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:30:50.062] /dev/mem opened. [2025-09-23 15:30:50.062] Memory mapped at address 0xffff87648000. [2025-09-23 15:30:50.062] Read at address 0x00600018 (0xffff87648018): 0x00000000 [2025-09-23 15:30:50.062] Write at address 0x00600018 (0xffff87648018): 0x00400040, readback 0x00400040 [2025-09-23 15:30:50.174] Loaded PowerVR consumer services. [2025-09-23 15:30:50.302] Waiting data available... [2025-09-23 15:30:50.318] 512+0 records in [2025-09-23 15:30:50.318] 512+0 records out [2025-09-23 15:30:50.350] Starting syslogd/klogd: done [2025-09-23 15:30:50.382] DML Start [2025-09-23 15:30:50.543] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:30:50.781] DML res1: 0 [2025-09-23 15:30:51.261] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:30:51.282] Read Success [2025-09-23 15:30:51.282] Verifying certificate... [2025-09-23 15:30:51.538] Verified OK [2025-09-23 15:30:51.538] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:30:53.123] Verified OK [2025-09-23 15:30:53.123] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:30:53.728] Verified OK [2025-09-23 15:30:53.749] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:30:56.323] fs.protected_hardlinks = 1 [2025-09-23 15:30:56.338] fs.protected_symlinks = 1 [2025-09-23 15:30:56.338] kernel.modules_disabled = 1 [2025-09-23 15:30:56.531] [2025-09-23 15:30:56.531] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:30:57.885] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:31:05.605] SBL1:1210.0.1.0 [2025-09-23 15:31:05.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:31:07.219] SBL2:1210.0.1.0 [2025-09-23 15:31:07.267] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:31:07.379] j-A [2025-09-23 15:31:14.719] The R5 Autosar Classic is running [2025-09-23 15:31:14.744] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:31:14.744] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:31:15.352] INIT: version 2.96 booting [2025-09-23 15:31:15.754] INIT: Entering runlevel: 5 [2025-09-23 15:31:15.754] mtd24 attached [2025-09-23 15:31:15.754] mtd28 attached [2025-09-23 15:31:15.754] mtd32 attached [2025-09-23 15:31:15.754] RTNETLINK answers: File exists [2025-09-23 15:31:15.754] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:31:15.754] ubi2:dml_code is mounted. [2025-09-23 15:31:15.754] ubi1:animations is mounted. [2025-09-23 15:31:15.754] ubi0:textures is mounted. [2025-09-23 15:31:15.754] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:31:15.754] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:31:15.754] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:31:15.754] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:31:15.754] data.LB_FadeInType0=100 [2025-09-23 15:31:15.754] data.CHLH_FadeInType0=0 [2025-09-23 15:31:15.754] data.WU_FadeInDelay=0 [2025-09-23 15:31:15.754] max_time_out=0 [2025-09-23 15:31:15.754] No splash screen [2025-09-23 15:31:15.754] stop dss Done [2025-09-23 15:31:15.796] /dev/mem opened. [2025-09-23 15:31:15.796] Memory mapped at address 0xffff9d684000. [2025-09-23 15:31:15.822] Read at address 0x00600018 (0xffff9d684018): 0x00000000 [2025-09-23 15:31:15.822] Write at address 0x00600018 (0xffff9d684018): 0x00400040, readback 0x00400040 [2025-09-23 15:31:15.869] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:31:15.869] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:31:16.077] Loaded PowerVR consumer services. [2025-09-23 15:31:16.109] Waiting data available... [2025-09-23 15:31:16.109] 512+0 records in [2025-09-23 15:31:16.109] 512+0 records out [2025-09-23 15:31:16.173] Starting syslogd/klogd: done [2025-09-23 15:31:16.189] DML Start [2025-09-23 15:31:16.349] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:31:16.541] DML res1: 0 [2025-09-23 15:31:17.029] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:31:17.029] Read Success [2025-09-23 15:31:17.029] Verifying certificate... [2025-09-23 15:31:17.301] Verified OK [2025-09-23 15:31:17.301] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:31:18.962] Verified OK [2025-09-23 15:31:18.983] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:31:19.583] Verified OK [2025-09-23 15:31:19.583] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:31:22.119] fs.protected_hardlinks = 1 [2025-09-23 15:31:22.119] fs.protected_symlinks = 1 [2025-09-23 15:31:22.119] kernel.modules_disabled = 1 [2025-09-23 15:31:22.295] [2025-09-23 15:31:22.295] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:31:23.619] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:31:31.381] SBL1:1210.0.1.0 [2025-09-23 15:31:31.414] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:31:32.996] SBL2:1210.0.1.0 [2025-09-23 15:31:33.028] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:31:33.140] j-A [2025-09-23 15:31:40.515] The R5 Autosar Classic is running [2025-09-23 15:31:40.515] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:31:40.515] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:31:41.122] INIT: version 2.96 booting [2025-09-23 15:31:41.234] INIT: Entering runlevel: 5 [2025-09-23 15:31:41.378] mtd28 attached [2025-09-23 15:31:41.394] mtd32 attached [2025-09-23 15:31:41.394] mtd24 attached [2025-09-23 15:31:41.442] RTNETLINK answers: File exists [2025-09-23 15:31:41.492] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:31:41.492] ubi0:animations is mounted. [2025-09-23 15:31:41.492] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:31:41.492] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:31:41.492] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:31:41.492] ubi2:textures is mounted. [2025-09-23 15:31:41.492] ubi1:dml_code is mounted. [2025-09-23 15:31:41.492] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:31:41.517] data.LB_FadeInType0=100 [2025-09-23 15:31:41.517] data.CHLH_FadeInType0=0 [2025-09-23 15:31:41.517] data.WU_FadeInDelay=0 [2025-09-23 15:31:41.517] max_time_out=0 [2025-09-23 15:31:41.517] No splash screen [2025-09-23 15:31:41.517] stop dss Done [2025-09-23 15:31:41.562] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:31:41.562] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:31:41.562] /dev/mem opened. [2025-09-23 15:31:41.588] Memory mapped at address 0xffff8c778000. [2025-09-23 15:31:41.588] Read at address 0x00600018 (0xffff8c778018): 0x00000000 [2025-09-23 15:31:41.588] Write at address 0x00600018 (0xffff8c778018): 0x00400040, readback 0x00400040 [2025-09-23 15:31:41.668] Loaded PowerVR consumer services. [2025-09-23 15:31:41.839] 512+0 records in [2025-09-23 15:31:41.839] 512+0 records out [2025-09-23 15:31:41.839] Waiting data available... [2025-09-23 15:31:41.870] Starting syslogd/klogd: done [2025-09-23 15:31:41.887] DML Start [2025-09-23 15:31:42.095] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:31:42.302] DML res1: 0 [2025-09-23 15:31:42.750] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:31:42.771] Read Success [2025-09-23 15:31:42.771] Verifying certificate... [2025-09-23 15:31:43.058] Verified OK [2025-09-23 15:31:43.075] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:31:44.753] Verified OK [2025-09-23 15:31:44.753] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:31:45.302] Verified OK [2025-09-23 15:31:45.302] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:31:47.987] fs.protected_hardlinks = 1 [2025-09-23 15:31:48.014] fs.protected_symlinks = 1 [2025-09-23 15:31:48.014] kernel.modules_disabled = 1 [2025-09-23 15:31:48.190] [2025-09-23 15:31:48.190] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:31:49.315] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:31:57.133] SBL1:1210.0.1.0 [2025-09-23 15:31:57.165] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:31:58.747] SBL2:1210.0.1.0 [2025-09-23 15:31:58.779] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:31:58.891] j-A [2025-09-23 15:32:06.265] The R5 Autosar Classic is running [2025-09-23 15:32:06.265] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:32:06.265] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:32:06.872] INIT: version 2.96 booting [2025-09-23 15:32:06.984] INIT: Entering runlevel: 5 [2025-09-23 15:32:07.144] mtd28 attached [2025-09-23 15:32:07.144] mtd32 attached [2025-09-23 15:32:07.160] mtd24 attached [2025-09-23 15:32:07.208] RTNETLINK answers: File exists [2025-09-23 15:32:07.208] ubi0:animations is mounted. [2025-09-23 15:32:07.267] ubi1:dml_code is mounted. [2025-09-23 15:32:07.267] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:32:07.267] ubi2:textures is mounted. [2025-09-23 15:32:07.267] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:32:07.267] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:32:07.267] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:32:07.267] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:32:07.267] data.LB_FadeInType0=100 [2025-09-23 15:32:07.267] data.CHLH_FadeInType0=0 [2025-09-23 15:32:07.267] data.WU_FadeInDelay=0 [2025-09-23 15:32:07.267] max_time_out=0 [2025-09-23 15:32:07.267] No splash screen [2025-09-23 15:32:07.267] stop dss Done [2025-09-23 15:32:07.356] /dev/mem opened. [2025-09-23 15:32:07.356] Memory mapped at address 0xffff878f1000. [2025-09-23 15:32:07.356] Read at address 0x00600018 (0xffff878f1018): 0x00000000 [2025-09-23 15:32:07.356] Write at address 0x00600018 (0xffff878f1018): 0x00400040, readback 0x00400040 [2025-09-23 15:32:07.356] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:32:07.356] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:32:07.565] Loaded PowerVR consumer services. [2025-09-23 15:32:07.621] Waiting data available... [2025-09-23 15:32:07.621] 512+0 records in [2025-09-23 15:32:07.621] 512+0 records out [2025-09-23 15:32:07.668] Starting syslogd/klogd: done [2025-09-23 15:32:07.685] DML Start [2025-09-23 15:32:07.844] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:32:08.084] DML res1: 0 [2025-09-23 15:32:08.500] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:32:08.521] Read Success [2025-09-23 15:32:08.521] Verifying certificate... [2025-09-23 15:32:08.792] Verified OK [2025-09-23 15:32:08.808] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:32:10.344] Verified OK [2025-09-23 15:32:10.344] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:32:10.963] Verified OK [2025-09-23 15:32:10.963] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:32:13.713] fs.protected_hardlinks = 1 [2025-09-23 15:32:13.729] fs.protected_symlinks = 1 [2025-09-23 15:32:13.729] kernel.modules_disabled = 1 [2025-09-23 15:32:13.920] [2025-09-23 15:32:13.920] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:32:15.163] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:32:22.919] SBL1:1210.0.1.0 [2025-09-23 15:32:22.951] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:32:24.534] SBL2:1210.0.1.0 [2025-09-23 15:32:24.572] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:32:24.677] j-A [2025-09-23 15:32:32.050] The R5 Autosar Classic is running [2025-09-23 15:32:32.050] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:32:32.050] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:32:32.658] INIT: version 2.96 booting [2025-09-23 15:32:32.770] INIT: Entering runlevel: 5 [2025-09-23 15:32:32.914] mtd24 attached [2025-09-23 15:32:32.930] mtd28 attached [2025-09-23 15:32:32.946] mtd32 attached [2025-09-23 15:32:32.962] ubi0:textures is mounted. [2025-09-23 15:32:32.978] ubi1:animations is mounted. [2025-09-23 15:32:32.994] RTNETLINK answers: File exists [2025-09-23 15:32:33.053] ubi2:dml_code is mounted. [2025-09-23 15:32:33.053] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:32:33.053] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:32:33.053] data.LB_FadeInType0=100 [2025-09-23 15:32:33.053] data.CHLH_FadeInType0=0 [2025-09-23 15:32:33.053] data.WU_FadeInDelay=0 [2025-09-23 15:32:33.053] max_time_out=0 [2025-09-23 15:32:33.053] No splash screen [2025-09-23 15:32:33.053] stop dss Done [2025-09-23 15:32:33.053] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:32:33.053] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:32:33.053] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:32:33.085] /dev/mem opened. [2025-09-23 15:32:33.085] Memory mapped at address 0xffffb4454000. [2025-09-23 15:32:33.111] Read at address 0x00600018 (0xffffb4454018): 0x00000000 [2025-09-23 15:32:33.111] Write at address 0x00600018 (0xffffb4454018): 0x00400040, readback 0x00400040 [2025-09-23 15:32:33.191] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:32:33.206] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:32:33.367] Loaded PowerVR consumer services. [2025-09-23 15:32:33.422] Waiting data available... [2025-09-23 15:32:33.422] 512+0 records in [2025-09-23 15:32:33.422] 512+0 records out [2025-09-23 15:32:33.454] Starting syslogd/klogd: done [2025-09-23 15:32:33.470] DML Start [2025-09-23 15:32:33.663] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:32:33.838] DML res1: 0 [2025-09-23 15:32:34.350] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:32:34.371] Read Success [2025-09-23 15:32:34.371] Verifying certificate... [2025-09-23 15:32:34.595] Verified OK [2025-09-23 15:32:34.611] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:32:36.418] Verified OK [2025-09-23 15:32:36.434] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:32:36.945] Verified OK [2025-09-23 15:32:36.945] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:32:39.407] fs.protected_hardlinks = 1 [2025-09-23 15:32:39.407] fs.protected_symlinks = 1 [2025-09-23 15:32:39.423] kernel.modules_disabled = 1 [2025-09-23 15:32:39.615] [2025-09-23 15:32:39.615] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:32:40.924] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:32:48.661] SBL1:1210.0.1.0 [2025-09-23 15:32:48.709] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:32:50.275] SBL2:1210.0.1.0 [2025-09-23 15:32:50.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:32:50.435] j-A [2025-09-23 15:32:57.773] The R5 Autosar Classic is running [2025-09-23 15:32:57.798] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:32:57.798] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:32:58.406] INIT: version 2.96 booting [2025-09-23 15:32:58.518] INIT: Entering runlevel: 5 [2025-09-23 15:32:58.677] mtd32 attached [2025-09-23 15:32:58.693] mtd24 attached [2025-09-23 15:32:58.693] mtd28 attached [2025-09-23 15:32:58.742] RTNETLINK answers: File exists [2025-09-23 15:32:58.847] ubi0:dml_code is mounted. [2025-09-23 15:32:58.847] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:32:58.847] ubi1:textures is mounted. [2025-09-23 15:32:58.847] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:32:58.847] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:32:58.847] ubi2:animations is mounted. [2025-09-23 15:32:58.847] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:32:58.847] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:32:58.848] data.LB_FadeInType0=100 [2025-09-23 15:32:58.848] data.CHLH_FadeInType0=0 [2025-09-23 15:32:58.848] data.WU_FadeInDelay=0 [2025-09-23 15:32:58.848] max_time_out=0 [2025-09-23 15:32:58.848] No splash screen [2025-09-23 15:32:58.848] stop dss Done [2025-09-23 15:32:58.848] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:32:58.875] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:32:58.875] /dev/mem opened. [2025-09-23 15:32:58.875] Memory mapped at address 0xffff8549f000. [2025-09-23 15:32:58.875] Read at address 0x00600018 (0xffff8549f018): 0x00000000 [2025-09-23 15:32:58.875] Write at address 0x00600018 (0xffff8549f018): 0x00400040, readback 0x00400040 [2025-09-23 15:32:58.986] Loaded PowerVR consumer services. [2025-09-23 15:32:59.130] Waiting data available... [2025-09-23 15:32:59.147] 512+0 records in [2025-09-23 15:32:59.147] 512+0 records out [2025-09-23 15:32:59.179] Starting syslogd/klogd: done [2025-09-23 15:32:59.194] DML Start [2025-09-23 15:32:59.403] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:32:59.626] DML res1: 0 [2025-09-23 15:33:00.009] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:33:00.030] Read Success [2025-09-23 15:33:00.030] Verifying certificate... [2025-09-23 15:33:00.270] Verified OK [2025-09-23 15:33:00.303] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:33:02.124] Verified OK [2025-09-23 15:33:02.124] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:33:02.664] Verified OK [2025-09-23 15:33:02.664] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:33:05.190] fs.protected_hardlinks = 1 [2025-09-23 15:33:05.220] fs.protected_symlinks = 1 [2025-09-23 15:33:05.220] kernel.modules_disabled = 1 [2025-09-23 15:33:05.396] [2025-09-23 15:33:05.396] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:33:06.691] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:33:14.423] SBL1:1210.0.1.0 [2025-09-23 15:33:14.471] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:33:16.038] SBL2:1210.0.1.0 [2025-09-23 15:33:16.073] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:33:16.183] j-A [2025-09-23 15:33:23.537] The R5 Autosar Classic is running [2025-09-23 15:33:23.537] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:33:23.558] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:33:24.165] INIT: version 2.96 booting [2025-09-23 15:33:24.572] INIT: Entering runlevel: 5 [2025-09-23 15:33:24.572] mtd24 attached [2025-09-23 15:33:24.572] mtd28 attached [2025-09-23 15:33:24.572] mtd32 attached [2025-09-23 15:33:24.572] RTNETLINK answers: File exists [2025-09-23 15:33:24.572] ubi0:textures is mounted. [2025-09-23 15:33:24.572] ubi1:animations is mounted. [2025-09-23 15:33:24.572] ubi2:dml_code is mounted. [2025-09-23 15:33:24.572] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:33:24.572] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:33:24.572] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:33:24.572] data.LB_FadeInType0=100 [2025-09-23 15:33:24.572] data.CHLH_FadeInType0=0 [2025-09-23 15:33:24.572] data.WU_FadeInDelay=0 [2025-09-23 15:33:24.572] max_time_out=0 [2025-09-23 15:33:24.572] No splash screen [2025-09-23 15:33:24.572] stop dss Done [2025-09-23 15:33:24.572] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:33:24.572] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:33:24.636] /dev/mem opened. [2025-09-23 15:33:24.636] Memory mapped at address 0xffffab37d000. [2025-09-23 15:33:24.636] Read at address 0x00600018 (0xffffab37d018): 0x00000000 [2025-09-23 15:33:24.636] Write at address 0x00600018 (0xffffab37d018): 0x00400040, readback 0x00400040 [2025-09-23 15:33:24.636] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:33:24.636] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:33:24.732] Loaded PowerVR consumer services. [2025-09-23 15:33:24.875] Waiting data available... [2025-09-23 15:33:24.875] 512+0 records in [2025-09-23 15:33:24.875] 512+0 records out [2025-09-23 15:33:24.923] Starting syslogd/klogd: done [2025-09-23 15:33:24.939] DML Start [2025-09-23 15:33:25.115] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:33:25.589] DML res1: 0 [2025-09-23 15:33:25.785] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:33:25.785] Read Success [2025-09-23 15:33:25.785] Verifying certificate... [2025-09-23 15:33:26.040] Verified OK [2025-09-23 15:33:26.056] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:33:27.815] Verified OK [2025-09-23 15:33:27.815] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:33:28.381] Verified OK [2025-09-23 15:33:28.381] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:33:30.780] fs.protected_hardlinks = 1 [2025-09-23 15:33:30.780] fs.protected_symlinks = 1 [2025-09-23 15:33:30.795] kernel.modules_disabled = 1 [2025-09-23 15:33:30.972] [2025-09-23 15:33:30.972] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:33:32.465] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:33:40.221] SBL1:1210.0.1.0 [2025-09-23 15:33:40.269] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:33:41.835] SBL2:1210.0.1.0 [2025-09-23 15:33:41.883] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:33:41.995] j-A [2025-09-23 15:33:49.334] The R5 Autosar Classic is running [2025-09-23 15:33:49.359] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:33:49.359] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:33:49.966] INIT: version 2.96 booting [2025-09-23 15:33:50.078] INIT: Entering runlevel: 5 [2025-09-23 15:33:50.239] mtd32 attached [2025-09-23 15:33:50.254] mtd28 attached [2025-09-23 15:33:50.254] mtd24 attached [2025-09-23 15:33:50.302] RTNETLINK answers: File exists [2025-09-23 15:33:50.352] ubi1:animations is mounted. [2025-09-23 15:33:50.352] ubi0:dml_code is mounted. [2025-09-23 15:33:50.352] ubi2:textures is mounted. [2025-09-23 15:33:50.352] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:33:50.352] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:33:50.352] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:33:50.352] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:33:50.352] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:33:50.352] data.LB_FadeInType0=100 [2025-09-23 15:33:50.373] data.CHLH_FadeInType0=0 [2025-09-23 15:33:50.373] data.WU_FadeInDelay=0 [2025-09-23 15:33:50.373] max_time_out=0 [2025-09-23 15:33:50.373] No splash screen [2025-09-23 15:33:50.373] stop dss Done [2025-09-23 15:33:50.468] /dev/mem opened. [2025-09-23 15:33:50.468] Memory mapped at address 0xffffb3d05000. [2025-09-23 15:33:50.468] Read at address 0x00600018 (0xffffb3d05018): 0x00000000 [2025-09-23 15:33:50.468] Write at address 0x00600018 (0xffffb3d05018): 0x00400040, readback 0x00400040 [2025-09-23 15:33:50.468] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:33:50.468] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:33:50.660] Loaded PowerVR consumer services. [2025-09-23 15:33:50.708] Waiting data available... [2025-09-23 15:33:50.724] 512+0 records in [2025-09-23 15:33:50.724] 512+0 records out [2025-09-23 15:33:50.771] Starting syslogd/klogd: done [2025-09-23 15:33:50.787] DML Start [2025-09-23 15:33:50.932] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:33:51.187] DML res1: 0 [2025-09-23 15:33:51.618] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:33:51.618] Read Success [2025-09-23 15:33:51.618] Verifying certificate... [2025-09-23 15:33:51.858] Verified OK [2025-09-23 15:33:51.874] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:33:53.593] Verified OK [2025-09-23 15:33:53.593] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:33:54.216] Verified OK [2025-09-23 15:33:54.216] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:33:56.887] fs.protected_hardlinks = 1 [2025-09-23 15:33:56.917] fs.protected_symlinks = 1 [2025-09-23 15:33:56.917] kernel.modules_disabled = 1 [2025-09-23 15:33:57.108] [2025-09-23 15:33:57.108] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:33:58.292] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:34:06.049] SBL1:1210.0.1.0 [2025-09-23 15:34:06.097] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:34:07.664] SBL2:1210.0.1.0 [2025-09-23 15:34:07.712] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:34:07.807] j-A [2025-09-23 15:34:15.161] The R5 Autosar Classic is running [2025-09-23 15:34:15.185] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:34:15.185] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:34:15.792] INIT: version 2.96 booting [2025-09-23 15:34:16.214] INIT: Entering runlevel: 5 [2025-09-23 15:34:16.214] mtd28 attached [2025-09-23 15:34:16.214] mtd24 attached [2025-09-23 15:34:16.214] mtd32 attached [2025-09-23 15:34:16.214] ubi0:animations is mounted. [2025-09-23 15:34:16.214] RTNETLINK answers: File exists [2025-09-23 15:34:16.214] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:34:16.214] ubi2:dml_code is mounted. [2025-09-23 15:34:16.214] ubi1:textures is mounted. [2025-09-23 15:34:16.214] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:34:16.214] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:34:16.214] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:34:16.214] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:34:16.214] data.LB_FadeInType0=100 [2025-09-23 15:34:16.214] data.CHLH_FadeInType0=0 [2025-09-23 15:34:16.214] data.WU_FadeInDelay=0 [2025-09-23 15:34:16.214] max_time_out=0 [2025-09-23 15:34:16.214] No splash screen [2025-09-23 15:34:16.214] stop dss Done [2025-09-23 15:34:16.262] /dev/mem opened. [2025-09-23 15:34:16.262] Memory mapped at address 0xffff82e41000. [2025-09-23 15:34:16.262] Read at address 0x00600018 (0xffff82e41018): 0x00000000 [2025-09-23 15:34:16.262] Write at address 0x00600018 (0xffff82e41018): 0x00400040, readback 0x00400040 [2025-09-23 15:34:16.262] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:34:16.278] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:34:16.454] Loaded PowerVR consumer services. [2025-09-23 15:34:16.518] Waiting data available... [2025-09-23 15:34:16.533] 512+0 records in [2025-09-23 15:34:16.533] 512+0 records out [2025-09-23 15:34:16.581] Starting syslogd/klogd: done [2025-09-23 15:34:16.597] DML Start [2025-09-23 15:34:16.790] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:34:17.013] DML res1: 0 [2025-09-23 15:34:17.440] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:34:17.440] Read Success [2025-09-23 15:34:17.440] Verifying certificate... [2025-09-23 15:34:17.696] Verified OK [2025-09-23 15:34:17.712] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:34:19.323] Verified OK [2025-09-23 15:34:19.323] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:34:19.882] Verified OK [2025-09-23 15:34:19.882] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:34:22.633] fs.protected_hardlinks = 1 [2025-09-23 15:34:22.633] fs.protected_symlinks = 1 [2025-09-23 15:34:22.648] kernel.modules_disabled = 1 [2025-09-23 15:34:22.856] [2025-09-23 15:34:22.856] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:34:24.092] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:34:31.845] SBL1:1210.0.1.0 [2025-09-23 15:34:31.893] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:34:33.460] SBL2:1210.0.1.0 [2025-09-23 15:34:33.508] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:34:33.619] j-A [2025-09-23 15:34:40.957] The R5 Autosar Classic is running [2025-09-23 15:34:40.988] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:34:40.988] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:34:41.596] INIT: version 2.96 booting [2025-09-23 15:34:41.707] INIT: Entering runlevel: 5 [2025-09-23 15:34:41.868] mtd32 attached [2025-09-23 15:34:41.868] mtd28 attached [2025-09-23 15:34:41.884] mtd24 attached [2025-09-23 15:34:41.916] ubi0:dml_code is mounted. [2025-09-23 15:34:42.006] RTNETLINK answers: File exists [2025-09-23 15:34:42.007] ubi2:textures is mounted. [2025-09-23 15:34:42.007] ubi1:animations is mounted. [2025-09-23 15:34:42.007] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:34:42.007] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:34:42.007] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:34:42.007] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:34:42.007] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:34:42.007] data.LB_FadeInType0=100 [2025-09-23 15:34:42.007] data.CHLH_FadeInType0=0 [2025-09-23 15:34:42.007] data.WU_FadeInDelay=0 [2025-09-23 15:34:42.007] max_time_out=0 [2025-09-23 15:34:42.007] No splash screen [2025-09-23 15:34:42.007] stop dss Done [2025-09-23 15:34:42.071] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:34:42.071] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:34:42.071] /dev/mem opened. [2025-09-23 15:34:42.071] Memory mapped at address 0xffff927b8000. [2025-09-23 15:34:42.071] Read at address 0x00600018 (0xffff927b8018): 0x00000000 [2025-09-23 15:34:42.071] Write at address 0x00600018 (0xffff927b8018): 0x00400040, readback 0x00400040 [2025-09-23 15:34:42.151] Loaded PowerVR consumer services. [2025-09-23 15:34:42.327] Waiting data available... [2025-09-23 15:34:42.343] 512+0 records in [2025-09-23 15:34:42.343] 512+0 records out [2025-09-23 15:34:42.390] Starting syslogd/klogd: done [2025-09-23 15:34:42.406] DML Start [2025-09-23 15:34:42.630] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:34:43.013] DML res1: 0 [2025-09-23 15:34:43.173] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:34:43.194] Read Success [2025-09-23 15:34:43.194] Verifying certificate... [2025-09-23 15:34:43.419] Verified OK [2025-09-23 15:34:43.434] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:34:45.014] Verified OK [2025-09-23 15:34:45.014] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:34:45.709] Verified OK [2025-09-23 15:34:45.709] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:34:48.379] fs.protected_hardlinks = 1 [2025-09-23 15:34:48.395] fs.protected_symlinks = 1 [2025-09-23 15:34:48.395] kernel.modules_disabled = 1 [2025-09-23 15:34:48.603] [2025-09-23 15:34:48.603] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:34:49.925] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:34:57.663] SBL1:1210.0.1.0 [2025-09-23 15:34:57.695] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:34:59.277] SBL2:1210.0.1.0 [2025-09-23 15:34:59.309] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:34:59.422] j-A [2025-09-23 15:35:06.793] The R5 Autosar Classic is running [2025-09-23 15:35:06.793] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:35:06.793] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:35:07.400] INIT: version 2.96 booting [2025-09-23 15:35:07.513] INIT: Entering runlevel: 5 [2025-09-23 15:35:07.829] mtd24 attached [2025-09-23 15:35:07.829] mtd28 attached [2025-09-23 15:35:07.829] mtd32 attached [2025-09-23 15:35:07.829] RTNETLINK answers: File exists [2025-09-23 15:35:07.829] ubi0:textures is mounted. [2025-09-23 15:35:07.829] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:35:07.829] ubi1:animations is mounted. [2025-09-23 15:35:07.829] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:35:07.829] ubi2:dml_code is mounted. [2025-09-23 15:35:07.829] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:35:07.829] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:35:07.829] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:35:07.829] data.LB_FadeInType0=100 [2025-09-23 15:35:07.829] data.CHLH_FadeInType0=0 [2025-09-23 15:35:07.829] data.WU_FadeInDelay=0 [2025-09-23 15:35:07.829] max_time_out=0 [2025-09-23 15:35:07.829] No splash screen [2025-09-23 15:35:07.829] stop dss Done [2025-09-23 15:35:07.846] /dev/mem opened. [2025-09-23 15:35:07.846] Memory mapped at address 0xffffa5085000. [2025-09-23 15:35:07.878] Read at address 0x00600018 (0xffffa5085018): 0x00000000 [2025-09-23 15:35:07.878] Write at address 0x00600018 (0xffffa5085018): 0x00400040, readback 0x00400040 [2025-09-23 15:35:07.878] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:35:07.878] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:35:08.102] Loaded PowerVR consumer services. [2025-09-23 15:35:08.117] Waiting data available... [2025-09-23 15:35:08.150] 512+0 records in [2025-09-23 15:35:08.150] 512+0 records out [2025-09-23 15:35:08.181] Starting syslogd/klogd: done [2025-09-23 15:35:08.197] DML Start [2025-09-23 15:35:08.390] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:35:08.613] DML res1: 0 [2025-09-23 15:35:09.029] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:35:09.050] Read Success [2025-09-23 15:35:09.050] Verifying certificate... [2025-09-23 15:35:09.338] Verified OK [2025-09-23 15:35:09.354] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:35:11.144] Verified OK [2025-09-23 15:35:11.144] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:35:11.636] Verified OK [2025-09-23 15:35:11.636] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:35:14.017] fs.protected_hardlinks = 1 [2025-09-23 15:35:14.017] fs.protected_symlinks = 1 [2025-09-23 15:35:14.017] kernel.modules_disabled = 1 [2025-09-23 15:35:14.208] [2025-09-23 15:35:14.208] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:35:15.705] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:35:23.404] SBL1:1210.0.1.0 [2025-09-23 15:35:23.452] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:35:25.018] SBL2:1210.0.1.0 [2025-09-23 15:35:25.066] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:35:25.179] j-A [2025-09-23 15:35:32.515] The R5 Autosar Classic is running [2025-09-23 15:35:32.547] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:35:32.547] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:35:33.154] INIT: version 2.96 booting [2025-09-23 15:35:33.266] INIT: Entering runlevel: 5 [2025-09-23 15:35:33.426] mtd28 attached [2025-09-23 15:35:33.426] mtd24 attached [2025-09-23 15:35:33.442] mtd32 attached [2025-09-23 15:35:33.474] ubi0:animations is mounted. [2025-09-23 15:35:33.550] ubi1:textures is mounted. [2025-09-23 15:35:33.555] RTNETLINK answers: File exists [2025-09-23 15:35:33.555] ubi2:dml_code is mounted. [2025-09-23 15:35:33.555] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:35:33.555] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:35:33.555] data.LB_FadeInType0=100 [2025-09-23 15:35:33.555] data.CHLH_FadeInType0=0 [2025-09-23 15:35:33.555] data.WU_FadeInDelay=0 [2025-09-23 15:35:33.555] max_time_out=0 [2025-09-23 15:35:33.555] No splash screen [2025-09-23 15:35:33.555] stop dss Done [2025-09-23 15:35:33.555] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:35:33.555] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:35:33.555] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:35:33.586] /dev/mem opened. [2025-09-23 15:35:33.586] Memory mapped at address 0xffff8e0d0000. [2025-09-23 15:35:33.612] Read at address 0x00600018 (0xffff8e0d0018): 0x00000000 [2025-09-23 15:35:33.612] Write at address 0x00600018 (0xffff8e0d0018): 0x00400040, readback 0x00400040 [2025-09-23 15:35:33.676] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:35:33.692] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:35:33.868] Loaded PowerVR consumer services. [2025-09-23 15:35:33.913] Waiting data available... [2025-09-23 15:35:33.913] 512+0 records in [2025-09-23 15:35:33.913] 512+0 records out [2025-09-23 15:35:33.945] Starting syslogd/klogd: done [2025-09-23 15:35:33.961] DML Start [2025-09-23 15:35:34.137] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:35:34.361] DML res1: 0 [2025-09-23 15:35:34.786] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:35:34.786] Read Success [2025-09-23 15:35:34.786] Verifying certificate... [2025-09-23 15:35:35.093] Verified OK [2025-09-23 15:35:35.094] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:35:36.768] Verified OK [2025-09-23 15:35:36.768] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:35:37.387] Verified OK [2025-09-23 15:35:37.387] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:35:39.883] fs.protected_hardlinks = 1 [2025-09-23 15:35:39.883] fs.protected_symlinks = 1 [2025-09-23 15:35:39.884] kernel.modules_disabled = 1 [2025-09-23 15:35:40.056] [2025-09-23 15:35:40.056] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:35:41.444] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:35:49.205] SBL1:1210.0.1.0 [2025-09-23 15:35:49.253] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:35:50.820] SBL2:1210.0.1.0 [2025-09-23 15:35:50.868] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:35:50.979] j-A [2025-09-23 15:35:58.317] The R5 Autosar Classic is running [2025-09-23 15:35:58.343] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:35:58.343] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:35:58.949] INIT: version 2.96 booting [2025-09-23 15:35:59.061] INIT: Entering runlevel: 5 [2025-09-23 15:35:59.206] mtd24 attached [2025-09-23 15:35:59.222] mtd32 attached [2025-09-23 15:35:59.238] mtd28 attached [2025-09-23 15:35:59.270] ubi0:textures is mounted. [2025-09-23 15:35:59.286] RTNETLINK answers: File exists [2025-09-23 15:35:59.286] ubi1:dml_code is mounted. [2025-09-23 15:35:59.340] ubi2:animations is mounted. [2025-09-23 15:35:59.340] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:35:59.340] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:35:59.340] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:35:59.340] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:35:59.340] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:35:59.340] data.LB_FadeInType0=100 [2025-09-23 15:35:59.340] data.CHLH_FadeInType0=0 [2025-09-23 15:35:59.340] data.WU_FadeInDelay=0 [2025-09-23 15:35:59.340] max_time_out=0 [2025-09-23 15:35:59.340] No splash screen [2025-09-23 15:35:59.340] stop dss Done [2025-09-23 15:35:59.387] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:35:59.387] /dev/mem opened. [2025-09-23 15:35:59.387] Memory mapped at address 0xffff7fcfd000. [2025-09-23 15:35:59.422] Read at address 0x00600018 (0xffff7fcfd018): 0x00000000 [2025-09-23 15:35:59.422] Write at address 0x00600018 (0xffff7fcfd018): 0x00400040, readback 0x00400040 [2025-09-23 15:35:59.422] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:35:59.645] Loaded PowerVR consumer services. [2025-09-23 15:35:59.677] Waiting data available... [2025-09-23 15:35:59.677] 512+0 records in [2025-09-23 15:35:59.693] 512+0 records out [2025-09-23 15:35:59.725] Starting syslogd/klogd: done [2025-09-23 15:35:59.741] DML Start [2025-09-23 15:35:59.901] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:36:00.125] DML res1: 0 [2025-09-23 15:36:00.646] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:36:00.646] Read Success [2025-09-23 15:36:00.646] Verifying certificate... [2025-09-23 15:36:00.902] Verified OK [2025-09-23 15:36:00.918] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:36:02.592] Verified OK [2025-09-23 15:36:02.592] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:36:03.167] Verified OK [2025-09-23 15:36:03.189] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:36:05.731] fs.protected_hardlinks = 1 [2025-09-23 15:36:05.731] fs.protected_symlinks = 1 [2025-09-23 15:36:05.747] kernel.modules_disabled = 1 [2025-09-23 15:36:05.939] [2025-09-23 15:36:05.939] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:36:07.182] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:36:14.963] SBL1:1210.0.1.0 [2025-09-23 15:36:15.011] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:36:16.577] SBL2:1210.0.1.0 [2025-09-23 15:36:16.625] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:36:16.721] j-A [2025-09-23 15:36:24.075] The R5 Autosar Classic is running [2025-09-23 15:36:24.096] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:36:24.096] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:36:24.703] INIT: version 2.96 booting [2025-09-23 15:36:24.815] INIT: Entering runlevel: 5 [2025-09-23 15:36:24.976] mtd32 attached [2025-09-23 15:36:24.976] mtd28 attached [2025-09-23 15:36:24.992] mtd24 attached [2025-09-23 15:36:25.024] ubi0:dml_code is mounted. [2025-09-23 15:36:25.040] RTNETLINK answers: File exists [2025-09-23 15:36:25.040] ubi2:textures is mounted. [2025-09-23 15:36:25.097] ubi1:animations is mounted. [2025-09-23 15:36:25.097] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:36:25.097] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:36:25.097] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:36:25.097] data.LB_FadeInType0=100 [2025-09-23 15:36:25.097] data.CHLH_FadeInType0=0 [2025-09-23 15:36:25.097] data.WU_FadeInDelay=0 [2025-09-23 15:36:25.097] max_time_out=0 [2025-09-23 15:36:25.097] No splash screen [2025-09-23 15:36:25.097] stop dss Done [2025-09-23 15:36:25.097] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:36:25.097] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:36:25.161] /dev/mem opened. [2025-09-23 15:36:25.161] Memory mapped at address 0xffff8826d000. [2025-09-23 15:36:25.161] Read at address 0x00600018 (0xffff8826d018): 0x00000000 [2025-09-23 15:36:25.161] Write at address 0x00600018 (0xffff8826d018): 0x00400040, readback 0x00400040 [2025-09-23 15:36:25.225] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:36:25.241] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:36:25.401] Loaded PowerVR consumer services. [2025-09-23 15:36:25.432] 512+0 records in [2025-09-23 15:36:25.449] 512+0 records out [2025-09-23 15:36:25.449] Waiting data available... [2025-09-23 15:36:25.464] Starting syslogd/klogd: done [2025-09-23 15:36:25.480] DML Start [2025-09-23 15:36:25.657] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:36:25.880] DML res1: 0 [2025-09-23 15:36:26.334] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:36:26.334] Read Success [2025-09-23 15:36:26.334] Verifying certificate... [2025-09-23 15:36:26.542] Verified OK [2025-09-23 15:36:26.558] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:36:28.173] Verified OK [2025-09-23 15:36:28.173] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:36:28.897] Verified OK [2025-09-23 15:36:28.897] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:36:31.599] fs.protected_hardlinks = 1 [2025-09-23 15:36:31.615] fs.protected_symlinks = 1 [2025-09-23 15:36:31.615] kernel.modules_disabled = 1 [2025-09-23 15:36:31.822] [2025-09-23 15:36:31.822] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:36:32.973] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:36:40.899] SBL1:1210.0.1.0 [2025-09-23 15:36:40.900] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:36:42.339] SBL2:1210.0.1.0 [2025-09-23 15:36:42.371] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:36:42.484] j-A [2025-09-23 15:36:49.854] The R5 Autosar Classic is running [2025-09-23 15:36:49.854] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:36:49.854] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:36:50.461] INIT: version 2.96 booting [2025-09-23 15:36:50.573] INIT: Entering runlevel: 5 [2025-09-23 15:36:50.734] mtd28 attached [2025-09-23 15:36:50.734] mtd24 attached [2025-09-23 15:36:50.749] mtd32 attached [2025-09-23 15:36:50.797] RTNETLINK answers: File exists [2025-09-23 15:36:50.797] ubi0:animations is mounted. [2025-09-23 15:36:50.856] ubi1:textures is mounted. [2025-09-23 15:36:50.857] ubi2:dml_code is mounted. [2025-09-23 15:36:50.857] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:36:50.857] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:36:50.857] data.LB_FadeInType0=100 [2025-09-23 15:36:50.857] data.CHLH_FadeInType0=0 [2025-09-23 15:36:50.857] data.WU_FadeInDelay=0 [2025-09-23 15:36:50.857] max_time_out=0 [2025-09-23 15:36:50.857] No splash screen [2025-09-23 15:36:50.857] stop dss Done [2025-09-23 15:36:50.857] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:36:50.857] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:36:50.857] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:36:50.928] /dev/mem opened. [2025-09-23 15:36:50.928] Memory mapped at address 0xffff977fc000. [2025-09-23 15:36:50.928] Read at address 0x00600018 (0xffff977fc018): 0x00000000 [2025-09-23 15:36:50.928] Write at address 0x00600018 (0xffff977fc018): 0x00400040, readback 0x00400040 [2025-09-23 15:36:50.976] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:36:50.976] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:36:51.184] Loaded PowerVR consumer services. [2025-09-23 15:36:51.200] Waiting data available... [2025-09-23 15:36:51.216] 512+0 records in [2025-09-23 15:36:51.216] 512+0 records out [2025-09-23 15:36:51.264] Starting syslogd/klogd: done [2025-09-23 15:36:51.280] DML Start [2025-09-23 15:36:51.424] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:36:51.647] DML res1: 0 [2025-09-23 15:36:52.111] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:36:52.132] Read Success [2025-09-23 15:36:52.132] Verifying certificate... [2025-09-23 15:36:52.371] Verified OK [2025-09-23 15:36:52.387] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:36:54.047] Verified OK [2025-09-23 15:36:54.047] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:36:54.670] Verified OK [2025-09-23 15:36:54.671] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:36:57.292] fs.protected_hardlinks = 1 [2025-09-23 15:36:57.292] fs.protected_symlinks = 1 [2025-09-23 15:36:57.308] kernel.modules_disabled = 1 [2025-09-23 15:36:57.501] [2025-09-23 15:36:57.501] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:36:58.716] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:37:06.741] SBL1:1210.0.1.0 [2025-09-23 15:37:06.789] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:37:08.355] SBL2:1210.0.1.0 [2025-09-23 15:37:08.403] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:37:08.516] j-A [2025-09-23 15:37:15.854] The R5 Autosar Classic is running [2025-09-23 15:37:15.880] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:37:15.880] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:37:16.486] INIT: version 2.96 booting [2025-09-23 15:37:16.599] INIT: Entering runlevel: 5 [2025-09-23 15:37:16.759] mtd24 attached [2025-09-23 15:37:16.759] mtd28 attached [2025-09-23 15:37:16.774] mtd32 attached [2025-09-23 15:37:16.885] ubi0:textures is mounted. [2025-09-23 15:37:16.885] RTNETLINK answers: File exists [2025-09-23 15:37:16.885] ubi1:animations is mounted. [2025-09-23 15:37:16.885] ubi2:dml_code is mounted. [2025-09-23 15:37:16.885] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:37:16.885] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:37:16.885] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:37:16.885] data.LB_FadeInType0=100 [2025-09-23 15:37:16.885] data.CHLH_FadeInType0=0 [2025-09-23 15:37:16.885] data.WU_FadeInDelay=0 [2025-09-23 15:37:16.885] max_time_out=0 [2025-09-23 15:37:16.885] No splash screen [2025-09-23 15:37:16.885] stop dss Done [2025-09-23 15:37:16.885] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:37:16.885] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:37:16.936] /dev/mem opened. [2025-09-23 15:37:16.936] Memory mapped at address 0xffffa704b000. [2025-09-23 15:37:16.936] Read at address 0x00600018 (0xffffa704b018): 0x00000000 [2025-09-23 15:37:16.936] Write at address 0x00600018 (0xffffa704b018): 0x00400040, readback 0x00400040 [2025-09-23 15:37:16.936] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:37:16.964] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:37:17.124] Loaded PowerVR consumer services. [2025-09-23 15:37:17.204] Waiting data available... [2025-09-23 15:37:17.236] 512+0 records in [2025-09-23 15:37:17.236] 512+0 records out [2025-09-23 15:37:17.251] Starting syslogd/klogd: done [2025-09-23 15:37:17.268] DML Start [2025-09-23 15:37:17.460] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:37:17.699] DML res1: 0 [2025-09-23 15:37:18.065] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:37:18.065] Read Success [2025-09-23 15:37:18.065] Verifying certificate... [2025-09-23 15:37:18.337] Verified OK [2025-09-23 15:37:18.353] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:37:20.142] Verified OK [2025-09-23 15:37:20.142] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:37:20.746] Verified OK [2025-09-23 15:37:20.746] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:37:23.254] fs.protected_hardlinks = 1 [2025-09-23 15:37:23.254] fs.protected_symlinks = 1 [2025-09-23 15:37:23.254] kernel.modules_disabled = 1 [2025-09-23 15:37:23.445] [2025-09-23 15:37:23.445] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:37:24.788] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:37:32.694] SBL1:1210.0.1.0 [2025-09-23 15:37:32.695] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:37:34.127] SBL2:1210.0.1.0 [2025-09-23 15:37:34.175] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:37:34.271] j-A [2025-09-23 15:37:41.626] The R5 Autosar Classic is running [2025-09-23 15:37:41.647] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:37:41.647] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:37:42.254] INIT: version 2.96 booting [2025-09-23 15:37:42.367] INIT: Entering runlevel: 5 [2025-09-23 15:37:42.527] mtd32 attached [2025-09-23 15:37:42.527] mtd24 attached [2025-09-23 15:37:42.543] mtd28 attached [2025-09-23 15:37:42.591] RTNETLINK answers: File exists [2025-09-23 15:37:42.655] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:37:42.655] ubi0:dml_code is mounted. [2025-09-23 15:37:42.655] ubi1:textures is mounted. [2025-09-23 15:37:42.655] ubi2:animations is mounted. [2025-09-23 15:37:42.655] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:37:42.655] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:37:42.655] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:37:42.655] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:37:42.655] data.LB_FadeInType0=100 [2025-09-23 15:37:42.655] data.CHLH_FadeInType0=0 [2025-09-23 15:37:42.655] data.WU_FadeInDelay=0 [2025-09-23 15:37:42.655] max_time_out=0 [2025-09-23 15:37:42.655] No splash screen [2025-09-23 15:37:42.655] stop dss Done [2025-09-23 15:37:42.723] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:37:42.723] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:37:42.723] /dev/mem opened. [2025-09-23 15:37:42.723] Memory mapped at address 0xffffaba42000. [2025-09-23 15:37:42.723] Read at address 0x00600018 (0xffffaba42018): 0x00000000 [2025-09-23 15:37:42.723] Write at address 0x00600018 (0xffffaba42018): 0x00400040, readback 0x00400040 [2025-09-23 15:37:42.850] Loaded PowerVR consumer services. [2025-09-23 15:37:42.962] Waiting data available... [2025-09-23 15:37:42.978] 512+0 records in [2025-09-23 15:37:42.978] 512+0 records out [2025-09-23 15:37:43.010] Starting syslogd/klogd: done [2025-09-23 15:37:43.026] DML Start [2025-09-23 15:37:43.234] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:37:43.474] DML res1: 0 [2025-09-23 15:37:43.810] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:37:43.831] Read Success [2025-09-23 15:37:43.831] Verifying certificate... [2025-09-23 15:37:44.086] Verified OK [2025-09-23 15:37:44.102] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:37:45.779] Verified OK [2025-09-23 15:37:45.779] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:37:46.365] Verified OK [2025-09-23 15:37:46.365] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:37:48.907] fs.protected_hardlinks = 1 [2025-09-23 15:37:48.923] fs.protected_symlinks = 1 [2025-09-23 15:37:48.923] kernel.modules_disabled = 1 [2025-09-23 15:37:49.114] [2025-09-23 15:37:49.114] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:37:50.535] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:37:58.559] SBL1:1210.0.1.0 [2025-09-23 15:37:58.607] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:38:00.174] SBL2:1210.0.1.0 [2025-09-23 15:38:00.209] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:38:00.317] j-A [2025-09-23 15:38:07.692] The R5 Autosar Classic is running [2025-09-23 15:38:07.692] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:38:07.692] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:38:08.299] INIT: version 2.96 booting [2025-09-23 15:38:08.411] INIT: Entering runlevel: 5 [2025-09-23 15:38:08.571] mtd32 attached [2025-09-23 15:38:08.571] mtd24 attached [2025-09-23 15:38:08.571] mtd28 attached [2025-09-23 15:38:08.636] RTNETLINK answers: File exists [2025-09-23 15:38:08.677] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:38:08.677] ubi1:textures is mounted. [2025-09-23 15:38:08.677] ubi0:dml_code is mounted. [2025-09-23 15:38:08.677] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:38:08.677] ubi2:animations is mounted. [2025-09-23 15:38:08.677] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:38:08.677] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:38:08.677] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:38:08.703] data.LB_FadeInType0=100 [2025-09-23 15:38:08.703] data.CHLH_FadeInType0=0 [2025-09-23 15:38:08.703] data.WU_FadeInDelay=0 [2025-09-23 15:38:08.703] max_time_out=0 [2025-09-23 15:38:08.703] No splash screen [2025-09-23 15:38:08.703] stop dss Done [2025-09-23 15:38:08.719] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:38:08.735] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:38:08.776] /dev/mem opened. [2025-09-23 15:38:08.776] Memory mapped at address 0xffffafcb7000. [2025-09-23 15:38:08.776] Read at address 0x00600018 (0xffffafcb7018): 0x00000000 [2025-09-23 15:38:08.776] Write at address 0x00600018 (0xffffafcb7018): 0x00400040, readback 0x00400040 [2025-09-23 15:38:08.983] Loaded PowerVR consumer services. [2025-09-23 15:38:09.015] Waiting data available... [2025-09-23 15:38:09.031] 512+0 records in [2025-09-23 15:38:09.031] 512+0 records out [2025-09-23 15:38:09.079] Starting syslogd/klogd: done [2025-09-23 15:38:09.095] DML Start [2025-09-23 15:38:09.287] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:38:09.447] DML res1: 0 [2025-09-23 15:38:09.996] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:38:09.996] Read Success [2025-09-23 15:38:09.996] Verifying certificate... [2025-09-23 15:38:10.235] Verified OK [2025-09-23 15:38:10.251] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:38:11.856] Verified OK [2025-09-23 15:38:11.856] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:38:12.479] Verified OK [2025-09-23 15:38:12.479] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:38:15.101] fs.protected_hardlinks = 1 [2025-09-23 15:38:15.132] fs.protected_symlinks = 1 [2025-09-23 15:38:15.132] kernel.modules_disabled = 1 [2025-09-23 15:38:15.324] [2025-09-23 15:38:15.324] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:38:16.533] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:38:24.347] SBL1:1210.0.1.0 [2025-09-23 15:38:24.395] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:38:25.962] SBL2:1210.0.1.0 [2025-09-23 15:38:26.010] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:38:26.106] j-A [2025-09-23 15:38:33.461] The R5 Autosar Classic is running [2025-09-23 15:38:33.482] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:38:33.482] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:38:34.089] INIT: version 2.96 booting [2025-09-23 15:38:34.201] INIT: Entering runlevel: 5 [2025-09-23 15:38:34.361] mtd24 attached [2025-09-23 15:38:34.377] mtd28 attached [2025-09-23 15:38:34.393] mtd32 attached [2025-09-23 15:38:34.409] ubi0:textures is mounted. [2025-09-23 15:38:34.425] ubi1:animations is mounted. [2025-09-23 15:38:34.495] RTNETLINK answers: File exists [2025-09-23 15:38:34.495] ubi2:dml_code is mounted. [2025-09-23 15:38:34.495] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:38:34.495] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:38:34.495] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:38:34.495] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:38:34.495] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:38:34.495] data.LB_FadeInType0=100 [2025-09-23 15:38:34.495] data.CHLH_FadeInType0=0 [2025-09-23 15:38:34.495] data.WU_FadeInDelay=0 [2025-09-23 15:38:34.495] max_time_out=0 [2025-09-23 15:38:34.495] No splash screen [2025-09-23 15:38:34.495] stop dss Done [2025-09-23 15:38:34.511] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:38:34.527] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:38:34.543] /dev/mem opened. [2025-09-23 15:38:34.543] Memory mapped at address 0xffff9e3ac000. [2025-09-23 15:38:34.569] Read at address 0x00600018 (0xffff9e3ac018): 0x00000000 [2025-09-23 15:38:34.569] Write at address 0x00600018 (0xffff9e3ac018): 0x00400040, readback 0x00400040 [2025-09-23 15:38:34.713] Loaded PowerVR consumer services. [2025-09-23 15:38:34.825] 512+0 records in [2025-09-23 15:38:34.825] 512+0 records out [2025-09-23 15:38:34.825] Waiting data available... [2025-09-23 15:38:34.872] Starting syslogd/klogd: done [2025-09-23 15:38:34.888] DML Start [2025-09-23 15:38:35.049] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:38:35.241] DML res1: 0 [2025-09-23 15:38:35.809] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:38:35.809] Read Success [2025-09-23 15:38:35.809] Verifying certificate... [2025-09-23 15:38:36.033] Verified OK [2025-09-23 15:38:36.049] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:38:37.739] Verified OK [2025-09-23 15:38:37.739] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:38:38.330] Verified OK [2025-09-23 15:38:38.330] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:38:40.999] fs.protected_hardlinks = 1 [2025-09-23 15:38:41.209] fs.protected_symlinks = 1 [2025-09-23 15:38:41.209] kernel.modules_disabled = 1 [2025-09-23 15:38:41.209] [2025-09-23 15:38:41.209] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:38:42.368] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:38:50.108] SBL1:1210.0.1.0 [2025-09-23 15:38:50.140] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:38:51.723] SBL2:1210.0.1.0 [2025-09-23 15:38:51.755] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:38:51.867] j-A [2025-09-23 15:38:59.257] The R5 Autosar Classic is running [2025-09-23 15:38:59.257] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:38:59.257] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:38:59.846] INIT: version 2.96 booting [2025-09-23 15:38:59.958] INIT: Entering runlevel: 5 [2025-09-23 15:39:00.118] mtd24 attached [2025-09-23 15:39:00.257] mtd28 attached [2025-09-23 15:39:00.258] mtd32 attached [2025-09-23 15:39:00.258] ubi0:textures is mounted. [2025-09-23 15:39:00.258] RTNETLINK answers: File exists [2025-09-23 15:39:00.258] ubi1:animations is mounted. [2025-09-23 15:39:00.258] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:39:00.258] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:39:00.258] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:39:00.258] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:39:00.258] ubi2:dml_code is mounted. [2025-09-23 15:39:00.258] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:39:00.261] data.LB_FadeInType0=100 [2025-09-23 15:39:00.261] data.CHLH_FadeInType0=0 [2025-09-23 15:39:00.261] data.WU_FadeInDelay=0 [2025-09-23 15:39:00.261] max_time_out=0 [2025-09-23 15:39:00.261] No splash screen [2025-09-23 15:39:00.261] stop dss Done [2025-09-23 15:39:00.277] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:39:00.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:39:00.341] /dev/mem opened. [2025-09-23 15:39:00.341] Memory mapped at address 0xffffae0f5000. [2025-09-23 15:39:00.341] Read at address 0x00600018 (0xffffae0f5018): 0x00000000 [2025-09-23 15:39:00.341] Write at address 0x00600018 (0xffffae0f5018): 0x00400040, readback 0x00400040 [2025-09-23 15:39:00.405] Loaded PowerVR consumer services. [2025-09-23 15:39:00.591] Waiting data available... [2025-09-23 15:39:00.591] 512+0 records in [2025-09-23 15:39:00.591] 512+0 records out [2025-09-23 15:39:00.623] Starting syslogd/klogd: done [2025-09-23 15:39:00.639] DML Start [2025-09-23 15:39:00.831] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:39:01.023] DML res1: 0 [2025-09-23 15:39:01.486] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:39:01.507] Read Success [2025-09-23 15:39:01.507] Verifying certificate... [2025-09-23 15:39:01.795] Verified OK [2025-09-23 15:39:01.827] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:39:03.694] Verified OK [2025-09-23 15:39:03.694] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:39:04.125] Verified OK [2025-09-23 15:39:04.125] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:39:06.444] fs.protected_hardlinks = 1 [2025-09-23 15:39:06.444] fs.protected_symlinks = 1 [2025-09-23 15:39:06.460] kernel.modules_disabled = 1 [2025-09-23 15:39:06.667] [2025-09-23 15:39:06.667] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:39:08.093] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:39:15.884] SBL1:1210.0.1.0 [2025-09-23 15:39:15.916] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:39:17.499] SBL2:1210.0.1.0 [2025-09-23 15:39:17.531] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:39:17.643] j-A [2025-09-23 15:39:25.015] The R5 Autosar Classic is running [2025-09-23 15:39:25.015] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:39:25.015] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:39:25.622] INIT: version 2.96 booting [2025-09-23 15:39:25.719] INIT: Entering runlevel: 5 [2025-09-23 15:39:26.039] mtd32 attached [2025-09-23 15:39:26.039] mtd24 attached [2025-09-23 15:39:26.039] mtd28 attached [2025-09-23 15:39:26.039] RTNETLINK answers: File exists [2025-09-23 15:39:26.039] ubi1:textures is mounted. [2025-09-23 15:39:26.039] ubi0:dml_code is mounted. [2025-09-23 15:39:26.039] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:39:26.039] ubi2:animations is mounted. [2025-09-23 15:39:26.039] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:39:26.039] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:39:26.039] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:39:26.039] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:39:26.039] data.LB_FadeInType0=100 [2025-09-23 15:39:26.039] data.CHLH_FadeInType0=0 [2025-09-23 15:39:26.039] data.WU_FadeInDelay=0 [2025-09-23 15:39:26.039] max_time_out=0 [2025-09-23 15:39:26.039] No splash screen [2025-09-23 15:39:26.039] stop dss Done [2025-09-23 15:39:26.058] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:39:26.074] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:39:26.074] /dev/mem opened. [2025-09-23 15:39:26.106] Memory mapped at address 0xffffba628000. [2025-09-23 15:39:26.106] Read at address 0x00600018 (0xffffba628018): 0x00000000 [2025-09-23 15:39:26.106] Write at address 0x00600018 (0xffffba628018): 0x00400040, readback 0x00400040 [2025-09-23 15:39:26.171] Loaded PowerVR consumer services. [2025-09-23 15:39:26.330] Waiting data available... [2025-09-23 15:39:26.347] 512+0 records in [2025-09-23 15:39:26.347] 512+0 records out [2025-09-23 15:39:26.394] Starting syslogd/klogd: done [2025-09-23 15:39:26.426] DML Start [2025-09-23 15:39:26.602] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:39:26.842] DML res1: 0 [2025-09-23 15:39:27.237] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:39:27.237] Read Success [2025-09-23 15:39:27.237] Verifying certificate... [2025-09-23 15:39:27.600] Verified OK [2025-09-23 15:39:27.600] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:39:29.139] Verified OK [2025-09-23 15:39:29.139] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:39:29.747] Verified OK [2025-09-23 15:39:30.193] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:39:32.326] fs.protected_hardlinks = 1 [2025-09-23 15:39:32.342] fs.protected_symlinks = 1 [2025-09-23 15:39:32.342] kernel.modules_disabled = 1 [2025-09-23 15:39:32.517] [2025-09-23 15:39:32.517] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:39:33.909] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:39:41.678] SBL1:1210.0.1.0 [2025-09-23 15:39:41.726] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:39:43.293] SBL2:1210.0.1.0 [2025-09-23 15:39:43.340] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:39:43.436] j-A [2025-09-23 15:39:50.791] The R5 Autosar Classic is running [2025-09-23 15:39:50.814] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:39:50.814] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:39:51.421] INIT: version 2.96 booting [2025-09-23 15:39:51.533] INIT: Entering runlevel: 5 [2025-09-23 15:39:51.692] mtd32 attached [2025-09-23 15:39:51.708] mtd24 attached [2025-09-23 15:39:51.708] mtd28 attached [2025-09-23 15:39:51.756] ubi0:dml_code is mounted. [2025-09-23 15:39:51.756] ubi1:textures is mounted. [2025-09-23 15:39:51.772] RTNETLINK answers: File exists [2025-09-23 15:39:51.772] ubi2:animations is mounted. [2025-09-23 15:39:51.827] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:39:51.827] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:39:51.827] data.LB_FadeInType0=100 [2025-09-23 15:39:51.827] data.CHLH_FadeInType0=0 [2025-09-23 15:39:51.827] data.WU_FadeInDelay=0 [2025-09-23 15:39:51.827] max_time_out=0 [2025-09-23 15:39:51.827] No splash screen [2025-09-23 15:39:51.827] stop dss Done [2025-09-23 15:39:51.827] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:39:51.827] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:39:51.827] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:39:51.877] /dev/mem opened. [2025-09-23 15:39:51.877] Memory mapped at address 0xffffa27ef000. [2025-09-23 15:39:51.877] Read at address 0x00600018 (0xffffa27ef018): 0x00000000 [2025-09-23 15:39:51.877] Write at address 0x00600018 (0xffffa27ef018): 0x00400040, readback 0x00400040 [2025-09-23 15:39:51.877] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:39:51.903] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:39:52.031] Loaded PowerVR consumer services. [2025-09-23 15:39:52.142] Waiting data available... [2025-09-23 15:39:52.158] 512+0 records in [2025-09-23 15:39:52.158] 512+0 records out [2025-09-23 15:39:52.206] Starting syslogd/klogd: done [2025-09-23 15:39:52.238] DML Start [2025-09-23 15:39:52.398] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:39:52.638] DML res1: 0 [2025-09-23 15:39:53.070] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:39:53.085] Read Success [2025-09-23 15:39:53.085] Verifying certificate... [2025-09-23 15:39:53.342] Verified OK [2025-09-23 15:39:53.358] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:39:55.082] Verified OK [2025-09-23 15:39:55.082] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:39:55.670] Verified OK [2025-09-23 15:39:55.670] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:39:58.258] fs.protected_hardlinks = 1 [2025-09-23 15:39:58.258] fs.protected_symlinks = 1 [2025-09-23 15:39:58.258] kernel.modules_disabled = 1 [2025-09-23 15:39:58.450] [2025-09-23 15:39:58.450] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:39:59.678] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:40:07.501] SBL1:1210.0.1.0 [2025-09-23 15:40:07.502] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:40:09.070] SBL2:1210.0.1.0 [2025-09-23 15:40:09.119] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:40:09.213] j-A [2025-09-23 15:40:16.567] The R5 Autosar Classic is running [2025-09-23 15:40:16.591] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:40:16.591] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:40:17.199] INIT: version 2.96 booting [2025-09-23 15:40:17.310] INIT: Entering runlevel: 5 [2025-09-23 15:40:17.470] mtd28 attached [2025-09-23 15:40:17.470] mtd24 attached [2025-09-23 15:40:17.486] mtd32 attached [2025-09-23 15:40:17.534] RTNETLINK answers: File exists [2025-09-23 15:40:17.594] ubi0:animations is mounted. [2025-09-23 15:40:17.594] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:40:17.594] ubi1:textures is mounted. [2025-09-23 15:40:17.594] ubi2:dml_code is mounted. [2025-09-23 15:40:17.594] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:40:17.594] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:40:17.594] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:40:17.594] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:40:17.594] data.LB_FadeInType0=100 [2025-09-23 15:40:17.594] data.CHLH_FadeInType0=0 [2025-09-23 15:40:17.594] data.WU_FadeInDelay=0 [2025-09-23 15:40:17.594] max_time_out=0 [2025-09-23 15:40:17.594] No splash screen [2025-09-23 15:40:17.594] stop dss Done [2025-09-23 15:40:17.668] /dev/mem opened. [2025-09-23 15:40:17.668] Memory mapped at address 0xffff93557000. [2025-09-23 15:40:17.668] Read at address 0x00600018 (0xffff93557018): 0x00000000 [2025-09-23 15:40:17.668] Write at address 0x00600018 (0xffff93557018): 0x00400040, readback 0x00400040 [2025-09-23 15:40:17.668] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:40:17.684] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:40:17.891] Loaded PowerVR consumer services. [2025-09-23 15:40:17.955] Waiting data available... [2025-09-23 15:40:17.971] 512+0 records in [2025-09-23 15:40:17.971] 512+0 records out [2025-09-23 15:40:18.019] Starting syslogd/klogd: done [2025-09-23 15:40:18.035] DML Start [2025-09-23 15:40:18.179] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:40:18.419] DML res1: 0 [2025-09-23 15:40:18.893] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:40:18.893] Read Success [2025-09-23 15:40:18.893] Verifying certificate... [2025-09-23 15:40:19.180] Verified OK [2025-09-23 15:40:19.196] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:40:20.913] Verified OK [2025-09-23 15:40:20.913] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:40:21.448] Verified OK [2025-09-23 15:40:21.448] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:40:23.910] fs.protected_hardlinks = 1 [2025-09-23 15:40:23.910] fs.protected_symlinks = 1 [2025-09-23 15:40:23.926] kernel.modules_disabled = 1 [2025-09-23 15:40:24.118] [2025-09-23 15:40:24.118] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:40:25.510] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:40:33.267] SBL1:1210.0.1.0 [2025-09-23 15:40:33.315] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:40:34.883] SBL2:1210.0.1.0 [2025-09-23 15:40:34.931] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:40:35.027] j-A [2025-09-23 15:40:42.398] The R5 Autosar Classic is running [2025-09-23 15:40:42.402] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:40:42.402] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:40:43.010] INIT: version 2.96 booting [2025-09-23 15:40:43.121] INIT: Entering runlevel: 5 [2025-09-23 15:40:43.266] mtd28 attached [2025-09-23 15:40:43.400] mtd24 attached [2025-09-23 15:40:43.401] mtd32 attached [2025-09-23 15:40:43.401] ubi0:animations is mounted. [2025-09-23 15:40:43.401] RTNETLINK answers: File exists [2025-09-23 15:40:43.401] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:40:43.401] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:40:43.401] ubi1:textures is mounted. [2025-09-23 15:40:43.401] ubi2:dml_code is mounted. [2025-09-23 15:40:43.401] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:40:43.401] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:40:43.401] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:40:43.401] data.LB_FadeInType0=100 [2025-09-23 15:40:43.401] data.CHLH_FadeInType0=0 [2025-09-23 15:40:43.401] data.WU_FadeInDelay=0 [2025-09-23 15:40:43.401] max_time_out=0 [2025-09-23 15:40:43.401] No splash screen [2025-09-23 15:40:43.401] stop dss Done [2025-09-23 15:40:43.448] /dev/mem opened. [2025-09-23 15:40:43.486] Memory mapped at address 0xffff8fdf9000. [2025-09-23 15:40:43.486] Read at address 0x00600018 (0xffff8fdf9018): 0x00000000 [2025-09-23 15:40:43.486] Write at address 0x00600018 (0xffff8fdf9018): 0x00400040, readback 0x00400040 [2025-09-23 15:40:43.486] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:40:43.486] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:40:43.549] Loaded PowerVR consumer services. [2025-09-23 15:40:43.710] Waiting data available... [2025-09-23 15:40:43.726] 512+0 records in [2025-09-23 15:40:43.726] 512+0 records out [2025-09-23 15:40:43.757] Starting syslogd/klogd: done [2025-09-23 15:40:43.790] DML Start [2025-09-23 15:40:43.965] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:40:44.415] DML res1: 0 [2025-09-23 15:40:44.604] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:40:44.620] Read Success [2025-09-23 15:40:44.620] Verifying certificate... [2025-09-23 15:40:44.861] Verified OK [2025-09-23 15:40:44.877] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:40:46.455] Verified OK [2025-09-23 15:40:46.455] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:40:47.043] Verified OK [2025-09-23 15:40:47.043] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:40:49.873] fs.protected_hardlinks = 1 [2025-09-23 15:40:49.901] fs.protected_symlinks = 1 [2025-09-23 15:40:49.901] kernel.modules_disabled = 1 [2025-09-23 15:40:50.075] [2025-09-23 15:40:50.075] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:40:51.247] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:40:59.072] SBL1:1210.0.1.0 [2025-09-23 15:40:59.104] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:41:00.687] SBL2:1210.0.1.0 [2025-09-23 15:41:00.719] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:41:00.830] j-A [2025-09-23 15:41:08.200] The R5 Autosar Classic is running [2025-09-23 15:41:08.200] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:41:08.200] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:41:08.807] INIT: version 2.96 booting [2025-09-23 15:41:08.919] INIT: Entering runlevel: 5 [2025-09-23 15:41:09.244] mtd24 attached [2025-09-23 15:41:09.244] mtd32 attached [2025-09-23 15:41:09.244] mtd28 attached [2025-09-23 15:41:09.244] ubi0:textures is mounted. [2025-09-23 15:41:09.244] RTNETLINK answers: File exists [2025-09-23 15:41:09.244] ubi1:dml_code is mounted. [2025-09-23 15:41:09.244] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:41:09.244] ubi2:animations is mounted. [2025-09-23 15:41:09.244] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:41:09.244] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:41:09.244] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:41:09.244] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:41:09.244] data.LB_FadeInType0=100 [2025-09-23 15:41:09.244] data.CHLH_FadeInType0=0 [2025-09-23 15:41:09.244] data.WU_FadeInDelay=0 [2025-09-23 15:41:09.244] max_time_out=0 [2025-09-23 15:41:09.244] No splash screen [2025-09-23 15:41:09.244] stop dss Done [2025-09-23 15:41:09.262] /dev/mem opened. [2025-09-23 15:41:09.262] Memory mapped at address 0xffff97934000. [2025-09-23 15:41:09.262] Read at address 0x00600018 (0xffff97934018): 0x00000000 [2025-09-23 15:41:09.262] Write at address 0x00600018 (0xffff97934018): 0x00400040, readback 0x00400040 [2025-09-23 15:41:09.262] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:41:09.278] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:41:09.406] Loaded PowerVR consumer services. [2025-09-23 15:41:09.534] Waiting data available... [2025-09-23 15:41:09.550] 512+0 records in [2025-09-23 15:41:09.550] 512+0 records out [2025-09-23 15:41:09.582] Starting syslogd/klogd: done [2025-09-23 15:41:09.598] DML Start [2025-09-23 15:41:09.774] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:41:10.260] DML res1: 0 [2025-09-23 15:41:10.445] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:41:10.472] Read Success [2025-09-23 15:41:10.472] Verifying certificate... [2025-09-23 15:41:10.713] Verified OK [2025-09-23 15:41:10.713] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:41:12.428] Verified OK [2025-09-23 15:41:12.428] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:41:13.065] Verified OK [2025-09-23 15:41:13.065] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:41:15.703] fs.protected_hardlinks = 1 [2025-09-23 15:41:15.718] fs.protected_symlinks = 1 [2025-09-23 15:41:15.718] kernel.modules_disabled = 1 [2025-09-23 15:41:15.910] [2025-09-23 15:41:15.910] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:41:17.020] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:41:24.854] SBL1:1210.0.1.0 [2025-09-23 15:41:24.885] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:41:26.468] SBL2:1210.0.1.0 [2025-09-23 15:41:26.500] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:41:26.612] j-A [2025-09-23 15:41:33.965] The R5 Autosar Classic is running [2025-09-23 15:41:33.965] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:41:33.986] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:41:34.593] INIT: version 2.96 booting [2025-09-23 15:41:34.705] INIT: Entering runlevel: 5 [2025-09-23 15:41:34.865] mtd24 attached [2025-09-23 15:41:34.865] mtd28 attached [2025-09-23 15:41:34.881] mtd32 attached [2025-09-23 15:41:34.913] ubi0:textures is mounted. [2025-09-23 15:41:34.929] ubi1:animations is mounted. [2025-09-23 15:41:34.991] RTNETLINK answers: File exists [2025-09-23 15:41:34.991] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:41:34.991] ubi2:dml_code is mounted. [2025-09-23 15:41:34.991] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:41:34.991] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:41:34.991] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:41:34.991] data.LB_FadeInType0=100 [2025-09-23 15:41:34.991] data.CHLH_FadeInType0=0 [2025-09-23 15:41:34.991] data.WU_FadeInDelay=0 [2025-09-23 15:41:34.991] max_time_out=0 [2025-09-23 15:41:34.991] No splash screen [2025-09-23 15:41:34.991] stop dss Done [2025-09-23 15:41:34.991] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:41:35.023] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:41:35.063] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:41:35.063] /dev/mem opened. [2025-09-23 15:41:35.063] Memory mapped at address 0xffff8bd37000. [2025-09-23 15:41:35.063] Read at address 0x00600018 (0xffff8bd37018): 0x00000000 [2025-09-23 15:41:35.063] Write at address 0x00600018 (0xffff8bd37018): 0x00400040, readback 0x00400040 [2025-09-23 15:41:35.159] Loaded PowerVR consumer services. [2025-09-23 15:41:35.332] Waiting data available... [2025-09-23 15:41:35.332] 512+0 records in [2025-09-23 15:41:35.332] 512+0 records out [2025-09-23 15:41:35.347] Starting syslogd/klogd: done [2025-09-23 15:41:35.363] DML Start [2025-09-23 15:41:35.555] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:41:35.780] DML res1: 0 [2025-09-23 15:41:36.141] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:41:36.141] Read Success [2025-09-23 15:41:36.141] Verifying certificate... [2025-09-23 15:41:36.381] Verified OK [2025-09-23 15:41:36.397] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:41:38.028] Verified OK [2025-09-23 15:41:38.028] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:41:38.668] Verified OK [2025-09-23 15:41:38.668] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:41:41.447] fs.protected_hardlinks = 1 [2025-09-23 15:41:41.447] fs.protected_symlinks = 1 [2025-09-23 15:41:41.447] kernel.modules_disabled = 1 [2025-09-23 15:41:41.639] [2025-09-23 15:41:41.639] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:41:42.879] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:41:50.645] SBL1:1210.0.1.0 [2025-09-23 15:41:50.693] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:41:52.260] SBL2:1210.0.1.0 [2025-09-23 15:41:52.308] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:41:52.420] j-A [2025-09-23 15:41:59.757] The R5 Autosar Classic is running [2025-09-23 15:41:59.789] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:41:59.789] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:42:00.396] INIT: version 2.96 booting [2025-09-23 15:42:00.507] INIT: Entering runlevel: 5 [2025-09-23 15:42:00.668] mtd32 attached [2025-09-23 15:42:00.668] mtd24 attached [2025-09-23 15:42:00.683] mtd28 attached [2025-09-23 15:42:00.731] RTNETLINK answers: File exists [2025-09-23 15:42:00.794] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:42:00.794] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:42:00.794] ubi2:animations is mounted. [2025-09-23 15:42:00.794] ubi1:textures is mounted. [2025-09-23 15:42:00.794] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:42:00.794] ubi0:dml_code is mounted. [2025-09-23 15:42:00.794] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:42:00.794] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:42:00.794] data.LB_FadeInType0=100 [2025-09-23 15:42:00.794] data.CHLH_FadeInType0=0 [2025-09-23 15:42:00.794] data.WU_FadeInDelay=0 [2025-09-23 15:42:00.794] max_time_out=0 [2025-09-23 15:42:00.794] No splash screen [2025-09-23 15:42:00.794] stop dss Done [2025-09-23 15:42:00.810] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:42:00.826] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:42:00.877] /dev/mem opened. [2025-09-23 15:42:00.877] Memory mapped at address 0xffff88a29000. [2025-09-23 15:42:00.877] Read at address 0x00600018 (0xffff88a29018): 0x00000000 [2025-09-23 15:42:00.877] Write at address 0x00600018 (0xffff88a29018): 0x00400040, readback 0x00400040 [2025-09-23 15:42:00.958] Loaded PowerVR consumer services. [2025-09-23 15:42:01.140] Waiting data available... [2025-09-23 15:42:01.140] 512+0 records in [2025-09-23 15:42:01.140] 512+0 records out [2025-09-23 15:42:01.172] Starting syslogd/klogd: done [2025-09-23 15:42:01.188] DML Start [2025-09-23 15:42:01.364] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:42:01.571] DML res1: 0 [2025-09-23 15:42:02.078] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:42:02.078] Read Success [2025-09-23 15:42:02.078] Verifying certificate... [2025-09-23 15:42:02.334] Verified OK [2025-09-23 15:42:02.350] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:42:04.075] Verified OK [2025-09-23 15:42:04.075] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:42:04.655] Verified OK [2025-09-23 15:42:04.655] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:42:07.213] fs.protected_hardlinks = 1 [2025-09-23 15:42:07.213] fs.protected_symlinks = 1 [2025-09-23 15:42:07.229] kernel.modules_disabled = 1 [2025-09-23 15:42:07.421] [2025-09-23 15:42:07.421] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:42:08.650] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:42:16.445] SBL1:1210.0.1.0 [2025-09-23 15:42:16.493] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:42:18.061] SBL2:1210.0.1.0 [2025-09-23 15:42:18.092] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:42:18.204] j-A [2025-09-23 15:42:25.558] The R5 Autosar Classic is running [2025-09-23 15:42:25.558] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:42:25.579] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:42:26.185] INIT: version 2.96 booting [2025-09-23 15:42:26.606] INIT: Entering runlevel: 5 [2025-09-23 15:42:26.606] mtd24 attached [2025-09-23 15:42:26.606] mtd28 attached [2025-09-23 15:42:26.606] mtd32 attached [2025-09-23 15:42:26.606] ubi0:textures is mounted. [2025-09-23 15:42:26.606] RTNETLINK answers: File exists [2025-09-23 15:42:26.606] ubi1:animations is mounted. [2025-09-23 15:42:26.606] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:42:26.606] ubi2:dml_code is mounted. [2025-09-23 15:42:26.606] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:42:26.606] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:42:26.606] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:42:26.606] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:42:26.606] data.LB_FadeInType0=100 [2025-09-23 15:42:26.606] data.CHLH_FadeInType0=0 [2025-09-23 15:42:26.606] data.WU_FadeInDelay=0 [2025-09-23 15:42:26.606] max_time_out=0 [2025-09-23 15:42:26.606] No splash screen [2025-09-23 15:42:26.606] stop dss Done [2025-09-23 15:42:26.616] /dev/mem opened. [2025-09-23 15:42:26.661] Memory mapped at address 0xffff8731f000. [2025-09-23 15:42:26.661] Read at address 0x00600018 (0xffff8731f018): 0x00000000 [2025-09-23 15:42:26.661] Write at address 0x00600018 (0xffff8731f018): 0x00400040, readback 0x00400040 [2025-09-23 15:42:26.661] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:42:26.661] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:42:26.900] Loaded PowerVR consumer services. [2025-09-23 15:42:26.948] Waiting data available... [2025-09-23 15:42:26.964] 512+0 records in [2025-09-23 15:42:26.964] 512+0 records out [2025-09-23 15:42:26.996] Starting syslogd/klogd: done [2025-09-23 15:42:27.012] DML Start [2025-09-23 15:42:27.172] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:42:27.380] DML res1: 0 [2025-09-23 15:42:27.888] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:42:27.888] Read Success [2025-09-23 15:42:27.888] Verifying certificate... [2025-09-23 15:42:28.111] Verified OK [2025-09-23 15:42:28.127] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:42:29.831] Verified OK [2025-09-23 15:42:29.831] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:42:30.469] Verified OK [2025-09-23 15:42:30.469] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:42:32.914] fs.protected_hardlinks = 1 [2025-09-23 15:42:32.931] fs.protected_symlinks = 1 [2025-09-23 15:42:32.931] kernel.modules_disabled = 1 [2025-09-23 15:42:33.123] [2025-09-23 15:42:33.123] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:42:34.537] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:42:42.197] SBL1:1210.0.1.0 [2025-09-23 15:42:42.245] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:42:43.812] SBL2:1210.0.1.0 [2025-09-23 15:42:43.860] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:42:43.972] j-A [2025-09-23 15:42:51.309] The R5 Autosar Classic is running [2025-09-23 15:42:51.334] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:42:51.334] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:42:51.942] INIT: version 2.96 booting [2025-09-23 15:42:52.054] INIT: Entering runlevel: 5 [2025-09-23 15:42:52.214] mtd24 attached [2025-09-23 15:42:52.214] mtd32 attached [2025-09-23 15:42:52.229] mtd28 attached [2025-09-23 15:42:52.278] ubi0:textures is mounted. [2025-09-23 15:42:52.350] ubi1:dml_code is mounted. [2025-09-23 15:42:52.350] RTNETLINK answers: File exists [2025-09-23 15:42:52.350] ubi2:animations is mounted. [2025-09-23 15:42:52.350] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:42:52.350] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:42:52.350] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:42:52.350] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:42:52.350] data.LB_FadeInType0=100 [2025-09-23 15:42:52.350] data.CHLH_FadeInType0=0 [2025-09-23 15:42:52.350] data.WU_FadeInDelay=0 [2025-09-23 15:42:52.350] max_time_out=0 [2025-09-23 15:42:52.350] No splash screen [2025-09-23 15:42:52.350] stop dss Done [2025-09-23 15:42:52.350] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:42:52.417] /dev/mem opened. [2025-09-23 15:42:52.417] Memory mapped at address 0xffffb831a000. [2025-09-23 15:42:52.417] Read at address 0x00600018 (0xffffb831a018): 0x00000000 [2025-09-23 15:42:52.417] Write at address 0x00600018 (0xffffb831a018): 0x00400040, readback 0x00400040 [2025-09-23 15:42:52.464] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:42:52.464] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:42:52.608] Loaded PowerVR consumer services. [2025-09-23 15:42:52.688] Waiting data available... [2025-09-23 15:42:52.704] 512+0 records in [2025-09-23 15:42:52.704] 512+0 records out [2025-09-23 15:42:52.720] Starting syslogd/klogd: done [2025-09-23 15:42:52.736] DML Start [2025-09-23 15:42:52.944] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:42:53.184] DML res1: 0 [2025-09-23 15:42:53.525] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:42:53.525] Read Success [2025-09-23 15:42:53.525] Verifying certificate... [2025-09-23 15:42:53.749] Verified OK [2025-09-23 15:42:53.765] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:42:55.395] Verified OK [2025-09-23 15:42:55.395] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:42:56.034] Verified OK [2025-09-23 15:42:56.055] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:42:58.805] fs.protected_hardlinks = 1 [2025-09-23 15:42:58.805] fs.protected_symlinks = 1 [2025-09-23 15:42:58.821] kernel.modules_disabled = 1 [2025-09-23 15:42:59.013] [2025-09-23 15:42:59.029] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:43:00.256] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:43:08.022] SBL1:1210.0.1.0 [2025-09-23 15:43:08.053] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:43:09.636] SBL2:1210.0.1.0 [2025-09-23 15:43:09.686] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:43:09.780] j-A [2025-09-23 15:43:17.155] The R5 Autosar Classic is running [2025-09-23 15:43:17.155] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:43:17.155] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:43:17.762] INIT: version 2.96 booting [2025-09-23 15:43:17.874] INIT: Entering runlevel: 5 [2025-09-23 15:43:18.018] mtd24 attached [2025-09-23 15:43:18.034] mtd32 attached [2025-09-23 15:43:18.050] mtd28 attached [2025-09-23 15:43:18.157] ubi0:textures is mounted. [2025-09-23 15:43:18.157] ubi1:dml_code is mounted. [2025-09-23 15:43:18.157] RTNETLINK answers: File exists [2025-09-23 15:43:18.157] ubi2:animations is mounted. [2025-09-23 15:43:18.157] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:43:18.157] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:43:18.157] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:43:18.157] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:43:18.157] data.LB_FadeInType0=100 [2025-09-23 15:43:18.157] data.CHLH_FadeInType0=0 [2025-09-23 15:43:18.157] data.WU_FadeInDelay=0 [2025-09-23 15:43:18.157] max_time_out=0 [2025-09-23 15:43:18.157] No splash screen [2025-09-23 15:43:18.157] stop dss Done [2025-09-23 15:43:18.157] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:43:18.225] /dev/mem opened. [2025-09-23 15:43:18.225] Memory mapped at address 0xffff92364000. [2025-09-23 15:43:18.225] Read at address 0x00600018 (0xffff92364018): 0x00000000 [2025-09-23 15:43:18.225] Write at address 0x00600018 (0xffff92364018): 0x00400040, readback 0x00400040 [2025-09-23 15:43:18.241] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:43:18.257] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:43:18.352] Loaded PowerVR consumer services. [2025-09-23 15:43:18.496] Waiting data available... [2025-09-23 15:43:18.512] 512+0 records in [2025-09-23 15:43:18.512] 512+0 records out [2025-09-23 15:43:18.544] Starting syslogd/klogd: done [2025-09-23 15:43:18.560] DML Start [2025-09-23 15:43:18.720] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:43:18.976] DML res1: 0 [2025-09-23 15:43:19.407] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:43:19.428] Read Success [2025-09-23 15:43:19.428] Verifying certificate... [2025-09-23 15:43:19.668] Verified OK [2025-09-23 15:43:19.684] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:43:21.330] Verified OK [2025-09-23 15:43:21.330] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:43:21.930] Verified OK [2025-09-23 15:43:21.930] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:43:24.584] fs.protected_hardlinks = 1 [2025-09-23 15:43:24.600] fs.protected_symlinks = 1 [2025-09-23 15:43:24.600] kernel.modules_disabled = 1 [2025-09-23 15:43:24.792] [2025-09-23 15:43:24.792] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:43:26.068] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:43:33.796] SBL1:1210.0.1.0 [2025-09-23 15:43:33.844] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:43:35.411] SBL2:1210.0.1.0 [2025-09-23 15:43:35.459] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:43:35.555] j-A [2025-09-23 15:43:42.909] The R5 Autosar Classic is running [2025-09-23 15:43:42.930] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:43:42.930] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:43:43.538] INIT: version 2.96 booting [2025-09-23 15:43:43.936] INIT: Entering runlevel: 5 [2025-09-23 15:43:43.936] mtd32 attached [2025-09-23 15:43:43.936] mtd28 attached [2025-09-23 15:43:43.936] mtd24 attached [2025-09-23 15:43:43.936] ubi0:dml_code is mounted. [2025-09-23 15:43:43.936] RTNETLINK answers: File exists [2025-09-23 15:43:43.936] ubi1:animations is mounted. [2025-09-23 15:43:43.936] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:43:43.936] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:43:43.936] ubi2:textures is mounted. [2025-09-23 15:43:43.936] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:43:43.936] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:43:43.936] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:43:43.936] data.LB_FadeInType0=100 [2025-09-23 15:43:43.936] data.CHLH_FadeInType0=0 [2025-09-23 15:43:43.936] data.WU_FadeInDelay=0 [2025-09-23 15:43:43.936] max_time_out=0 [2025-09-23 15:43:43.936] No splash screen [2025-09-23 15:43:43.936] stop dss Done [2025-09-23 15:43:43.946] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:43:43.968] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:43:43.968] /dev/mem opened. [2025-09-23 15:43:43.994] Memory mapped at address 0xffffac9c9000. [2025-09-23 15:43:43.994] Read at address 0x00600018 (0xffffac9c9018): 0x00000000 [2025-09-23 15:43:43.994] Write at address 0x00600018 (0xffffac9c9018): 0x00400040, readback 0x00400040 [2025-09-23 15:43:44.153] Loaded PowerVR consumer services. [2025-09-23 15:43:44.266] Waiting data available... [2025-09-23 15:43:44.281] 512+0 records in [2025-09-23 15:43:44.298] 512+0 records out [2025-09-23 15:43:44.313] Starting syslogd/klogd: done [2025-09-23 15:43:44.329] DML Start [2025-09-23 15:43:44.489] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:43:44.712] DML res1: 0 [2025-09-23 15:43:45.127] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:43:45.127] Read Success [2025-09-23 15:43:45.127] Verifying certificate... [2025-09-23 15:43:45.382] Verified OK [2025-09-23 15:43:45.399] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:43:47.109] Verified OK [2025-09-23 15:43:47.109] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:43:47.698] Verified OK [2025-09-23 15:43:47.698] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:43:50.267] fs.protected_hardlinks = 1 [2025-09-23 15:43:50.267] fs.protected_symlinks = 1 [2025-09-23 15:43:50.267] kernel.modules_disabled = 1 [2025-09-23 15:43:50.442] [2025-09-23 15:43:50.442] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:43:51.798] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:43:59.550] SBL1:1210.0.1.0 [2025-09-23 15:43:59.581] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:44:01.165] SBL2:1210.0.1.0 [2025-09-23 15:44:01.196] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:44:01.308] j-A [2025-09-23 15:44:08.684] The R5 Autosar Classic is running [2025-09-23 15:44:08.684] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:44:08.684] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:44:09.291] INIT: version 2.96 booting [2025-09-23 15:44:09.402] INIT: Entering runlevel: 5 [2025-09-23 15:44:09.546] mtd24 attached [2025-09-23 15:44:09.562] mtd28 attached [2025-09-23 15:44:09.578] mtd32 attached [2025-09-23 15:44:09.594] ubi0:textures is mounted. [2025-09-23 15:44:09.627] RTNETLINK answers: File exists [2025-09-23 15:44:09.627] ubi1:animations is mounted. [2025-09-23 15:44:09.685] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:44:09.685] ubi2:dml_code is mounted. [2025-09-23 15:44:09.685] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:44:09.685] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:44:09.685] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:44:09.685] data.LB_FadeInType0=100 [2025-09-23 15:44:09.685] data.CHLH_FadeInType0=0 [2025-09-23 15:44:09.685] data.WU_FadeInDelay=0 [2025-09-23 15:44:09.685] max_time_out=0 [2025-09-23 15:44:09.685] No splash screen [2025-09-23 15:44:09.685] stop dss Done [2025-09-23 15:44:09.685] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:44:09.764] /dev/mem opened. [2025-09-23 15:44:09.764] Memory mapped at address 0xffff9e094000. [2025-09-23 15:44:09.764] Read at address 0x00600018 (0xffff9e094018): 0x00000000 [2025-09-23 15:44:09.764] Write at address 0x00600018 (0xffff9e094018): 0x00400040, readback 0x00400040 [2025-09-23 15:44:09.764] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:44:09.764] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:44:09.876] Loaded PowerVR consumer services. [2025-09-23 15:44:10.003] Waiting data available... [2025-09-23 15:44:10.019] 512+0 records in [2025-09-23 15:44:10.019] 512+0 records out [2025-09-23 15:44:10.051] Starting syslogd/klogd: done [2025-09-23 15:44:10.067] DML Start [2025-09-23 15:44:10.243] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:44:10.451] DML res1: 0 [2025-09-23 15:44:10.961] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:44:10.961] Read Success [2025-09-23 15:44:10.961] Verifying certificate... [2025-09-23 15:44:11.200] Verified OK [2025-09-23 15:44:11.216] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:44:12.783] Verified OK [2025-09-23 15:44:12.783] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:44:13.401] Verified OK [2025-09-23 15:44:13.401] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:44:16.023] fs.protected_hardlinks = 1 [2025-09-23 15:44:16.023] fs.protected_symlinks = 1 [2025-09-23 15:44:16.039] kernel.modules_disabled = 1 [2025-09-23 15:44:16.230] [2025-09-23 15:44:16.230] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:44:17.515] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:44:25.323] SBL1:1210.0.1.0 [2025-09-23 15:44:25.355] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:44:26.936] SBL2:1210.0.1.0 [2025-09-23 15:44:26.968] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:44:27.081] j-A [2025-09-23 15:44:34.453] The R5 Autosar Classic is running [2025-09-23 15:44:34.453] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:44:34.453] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:44:35.060] INIT: version 2.96 booting [2025-09-23 15:44:35.172] INIT: Entering runlevel: 5 [2025-09-23 15:44:35.515] mtd24 attached [2025-09-23 15:44:35.515] mtd32 attached [2025-09-23 15:44:35.515] mtd28 attached [2025-09-23 15:44:35.515] ubi0:textures is mounted. [2025-09-23 15:44:35.515] RTNETLINK answers: File exists [2025-09-23 15:44:35.515] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:44:35.515] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:44:35.515] ubi2:animations is mounted. [2025-09-23 15:44:35.515] ubi1:dml_code is mounted. [2025-09-23 15:44:35.515] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:44:35.515] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:44:35.515] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:44:35.515] data.LB_FadeInType0=100 [2025-09-23 15:44:35.515] data.CHLH_FadeInType0=0 [2025-09-23 15:44:35.515] data.WU_FadeInDelay=0 [2025-09-23 15:44:35.515] max_time_out=0 [2025-09-23 15:44:35.515] No splash screen [2025-09-23 15:44:35.515] stop dss Done [2025-09-23 15:44:35.515] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:44:35.515] /dev/mem opened. [2025-09-23 15:44:35.541] Memory mapped at address 0xffff9b5ed000. [2025-09-23 15:44:35.541] Read at address 0x00600018 (0xffff9b5ed018): 0x00000000 [2025-09-23 15:44:35.541] Write at address 0x00600018 (0xffff9b5ed018): 0x00400040, readback 0x00400040 [2025-09-23 15:44:35.541] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:44:35.685] Loaded PowerVR consumer services. [2025-09-23 15:44:35.797] Waiting data available... [2025-09-23 15:44:35.813] 512+0 records in [2025-09-23 15:44:35.813] 512+0 records out [2025-09-23 15:44:35.861] Starting syslogd/klogd: done [2025-09-23 15:44:35.877] DML Start [2025-09-23 15:44:36.053] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:44:36.293] DML res1: 0 [2025-09-23 15:44:36.658] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:44:36.658] Read Success [2025-09-23 15:44:36.658] Verifying certificate... [2025-09-23 15:44:36.881] Verified OK [2025-09-23 15:44:36.881] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:44:38.630] Verified OK [2025-09-23 15:44:38.630] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:44:39.220] Verified OK [2025-09-23 15:44:39.220] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:44:41.714] fs.protected_hardlinks = 1 [2025-09-23 15:44:41.714] fs.protected_symlinks = 1 [2025-09-23 15:44:41.730] kernel.modules_disabled = 1 [2025-09-23 15:44:41.921] [2025-09-23 15:44:41.921] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:44:43.373] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:44:51.126] SBL1:1210.0.1.0 [2025-09-23 15:44:51.174] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:44:52.741] SBL2:1210.0.1.0 [2025-09-23 15:44:52.789] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:44:52.885] j-A [2025-09-23 15:45:00.239] The R5 Autosar Classic is running [2025-09-23 15:45:00.260] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:45:00.260] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:45:00.868] INIT: version 2.96 booting [2025-09-23 15:45:00.980] INIT: Entering runlevel: 5 [2025-09-23 15:45:01.124] mtd24 attached [2025-09-23 15:45:01.140] mtd28 attached [2025-09-23 15:45:01.156] mtd32 attached [2025-09-23 15:45:01.204] RTNETLINK answers: File exists [2025-09-23 15:45:01.204] ubi0:textures is mounted. [2025-09-23 15:45:01.312] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:45:01.312] ubi2:dml_code is mounted. [2025-09-23 15:45:01.312] ubi1:animations is mounted. [2025-09-23 15:45:01.312] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:45:01.312] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:45:01.312] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:45:01.312] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:45:01.312] data.LB_FadeInType0=100 [2025-09-23 15:45:01.312] data.CHLH_FadeInType0=0 [2025-09-23 15:45:01.312] data.WU_FadeInDelay=0 [2025-09-23 15:45:01.312] max_time_out=0 [2025-09-23 15:45:01.312] No splash screen [2025-09-23 15:45:01.312] stop dss Done [2025-09-23 15:45:01.329] /dev/mem opened. [2025-09-23 15:45:01.329] Memory mapped at address 0xffff98bf3000. [2025-09-23 15:45:01.329] Read at address 0x00600018 (0xffff98bf3018): 0x00000000 [2025-09-23 15:45:01.329] Write at address 0x00600018 (0xffff98bf3018): 0x00400040, readback 0x00400040 [2025-09-23 15:45:01.329] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:45:01.345] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:45:01.504] Loaded PowerVR consumer services. [2025-09-23 15:45:01.617] Waiting data available... [2025-09-23 15:45:01.617] 512+0 records in [2025-09-23 15:45:01.633] 512+0 records out [2025-09-23 15:45:01.664] Starting syslogd/klogd: done [2025-09-23 15:45:01.680] DML Start [2025-09-23 15:45:01.840] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:45:02.064] DML res1: 0 [2025-09-23 15:45:02.496] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:45:02.517] Read Success [2025-09-23 15:45:02.517] Verifying certificate... [2025-09-23 15:45:02.741] Verified OK [2025-09-23 15:45:02.757] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:45:04.412] Verified OK [2025-09-23 15:45:04.412] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:45:04.993] Verified OK [2025-09-23 15:45:04.993] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:45:07.647] fs.protected_hardlinks = 1 [2025-09-23 15:45:07.647] fs.protected_symlinks = 1 [2025-09-23 15:45:07.663] kernel.modules_disabled = 1 [2025-09-23 15:45:07.871] [2025-09-23 15:45:07.871] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:45:09.131] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:45:16.898] SBL1:1210.0.1.0 [2025-09-23 15:45:16.946] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:45:18.514] SBL2:1210.0.1.0 [2025-09-23 15:45:18.564] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:45:18.658] j-A [2025-09-23 15:45:26.012] The R5 Autosar Classic is running [2025-09-23 15:45:26.012] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:45:26.033] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:45:26.640] INIT: version 2.96 booting [2025-09-23 15:45:26.752] INIT: Entering runlevel: 5 [2025-09-23 15:45:26.896] mtd24 attached [2025-09-23 15:45:26.912] mtd32 attached [2025-09-23 15:45:26.928] mtd28 attached [2025-09-23 15:45:27.036] ubi0:textures is mounted. [2025-09-23 15:45:27.037] RTNETLINK answers: File exists [2025-09-23 15:45:27.037] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:45:27.037] ubi2:animations is mounted. [2025-09-23 15:45:27.037] ubi1:dml_code is mounted. [2025-09-23 15:45:27.037] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:45:27.037] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:45:27.037] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:45:27.037] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:45:27.037] data.LB_FadeInType0=100 [2025-09-23 15:45:27.037] data.CHLH_FadeInType0=0 [2025-09-23 15:45:27.037] data.WU_FadeInDelay=0 [2025-09-23 15:45:27.037] max_time_out=0 [2025-09-23 15:45:27.037] No splash screen [2025-09-23 15:45:27.037] stop dss Done [2025-09-23 15:45:27.066] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:45:27.082] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:45:27.117] /dev/mem opened. [2025-09-23 15:45:27.117] Memory mapped at address 0xffff9ae20000. [2025-09-23 15:45:27.117] Read at address 0x00600018 (0xffff9ae20018): 0x00000000 [2025-09-23 15:45:27.117] Write at address 0x00600018 (0xffff9ae20018): 0x00400040, readback 0x00400040 [2025-09-23 15:45:27.325] Loaded PowerVR consumer services. [2025-09-23 15:45:27.411] 512+0 records in [2025-09-23 15:45:27.411] 512+0 records out [2025-09-23 15:45:27.411] Waiting data available... [2025-09-23 15:45:27.443] Starting syslogd/klogd: done [2025-09-23 15:45:27.459] DML Start [2025-09-23 15:45:27.683] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:45:27.923] DML res1: 0 [2025-09-23 15:45:28.256] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:45:28.256] Read Success [2025-09-23 15:45:28.256] Verifying certificate... [2025-09-23 15:45:28.527] Verified OK [2025-09-23 15:45:28.543] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:45:30.151] Verified OK [2025-09-23 15:45:30.151] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:45:30.717] Verified OK [2025-09-23 15:45:30.717] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:45:33.338] fs.protected_hardlinks = 1 [2025-09-23 15:45:33.354] fs.protected_symlinks = 1 [2025-09-23 15:45:33.370] kernel.modules_disabled = 1 [2025-09-23 15:45:33.562] [2025-09-23 15:45:33.562] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:45:34.982] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:45:42.681] SBL1:1210.0.1.0 [2025-09-23 15:45:42.713] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:45:44.296] SBL2:1210.0.1.0 [2025-09-23 15:45:44.346] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:45:44.440] j-A [2025-09-23 15:45:51.794] The R5 Autosar Classic is running [2025-09-23 15:45:51.794] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:45:51.815] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:45:52.422] INIT: version 2.96 booting [2025-09-23 15:45:52.534] INIT: Entering runlevel: 5 [2025-09-23 15:45:52.678] mtd28 attached [2025-09-23 15:45:52.694] mtd24 attached [2025-09-23 15:45:52.710] mtd32 attached [2025-09-23 15:45:52.833] ubi0:animations is mounted. [2025-09-23 15:45:52.833] RTNETLINK answers: File exists [2025-09-23 15:45:52.834] ubi1:textures is mounted. [2025-09-23 15:45:52.834] ubi2:dml_code is mounted. [2025-09-23 15:45:52.834] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:45:52.834] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:45:52.834] data.LB_FadeInType0=100 [2025-09-23 15:45:52.834] data.CHLH_FadeInType0=0 [2025-09-23 15:45:52.834] data.WU_FadeInDelay=0 [2025-09-23 15:45:52.834] max_time_out=0 [2025-09-23 15:45:52.834] No splash screen [2025-09-23 15:45:52.834] stop dss Done [2025-09-23 15:45:52.834] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:45:52.834] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:45:52.834] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:45:52.848] /dev/mem opened. [2025-09-23 15:45:52.848] Memory mapped at address 0xffff9e87d000. [2025-09-23 15:45:52.874] Read at address 0x00600018 (0xffff9e87d018): 0x00000000 [2025-09-23 15:45:52.874] Write at address 0x00600018 (0xffff9e87d018): 0x00400040, readback 0x00400040 [2025-09-23 15:45:52.906] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:45:52.906] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:45:52.986] Loaded PowerVR consumer services. [2025-09-23 15:45:53.145] Waiting data available... [2025-09-23 15:45:53.161] 512+0 records in [2025-09-23 15:45:53.161] 512+0 records out [2025-09-23 15:45:53.177] Starting syslogd/klogd: done [2025-09-23 15:45:53.209] DML Start [2025-09-23 15:45:53.385] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:45:53.609] DML res1: 0 [2025-09-23 15:45:54.035] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:45:54.035] Read Success [2025-09-23 15:45:54.035] Verifying certificate... [2025-09-23 15:45:54.243] Verified OK [2025-09-23 15:45:54.259] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:45:55.818] Verified OK [2025-09-23 15:45:55.818] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:45:56.392] Verified OK [2025-09-23 15:45:56.392] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:45:59.223] fs.protected_hardlinks = 1 [2025-09-23 15:45:59.252] fs.protected_symlinks = 1 [2025-09-23 15:45:59.252] kernel.modules_disabled = 1 [2025-09-23 15:45:59.430] [2025-09-23 15:45:59.430] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:46:00.693] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:46:08.466] SBL1:1210.0.1.0 [2025-09-23 15:46:08.514] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:46:10.081] SBL2:1210.0.1.0 [2025-09-23 15:46:10.129] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:46:10.225] j-A [2025-09-23 15:46:17.579] The R5 Autosar Classic is running [2025-09-23 15:46:17.604] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:46:17.604] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:46:18.211] INIT: version 2.96 booting [2025-09-23 15:46:18.323] INIT: Entering runlevel: 5 [2025-09-23 15:46:18.626] mtd24 attached [2025-09-23 15:46:18.626] mtd28 attached [2025-09-23 15:46:18.626] mtd32 attached [2025-09-23 15:46:18.626] ubi0:textures is mounted. [2025-09-23 15:46:18.626] RTNETLINK answers: File exists [2025-09-23 15:46:18.626] ubi1:animations is mounted. [2025-09-23 15:46:18.626] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:46:18.626] ubi2:dml_code is mounted. [2025-09-23 15:46:18.626] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:46:18.626] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:46:18.626] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:46:18.626] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:46:18.626] data.LB_FadeInType0=100 [2025-09-23 15:46:18.626] data.CHLH_FadeInType0=0 [2025-09-23 15:46:18.626] data.WU_FadeInDelay=0 [2025-09-23 15:46:18.626] max_time_out=0 [2025-09-23 15:46:18.626] No splash screen [2025-09-23 15:46:18.626] stop dss Done [2025-09-23 15:46:18.646] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:46:18.688] /dev/mem opened. [2025-09-23 15:46:18.688] Memory mapped at address 0xffffb41e3000. [2025-09-23 15:46:18.688] Read at address 0x00600018 (0xffffb41e3018): 0x00000000 [2025-09-23 15:46:18.688] Write at address 0x00600018 (0xffffb41e3018): 0x00400040, readback 0x00400040 [2025-09-23 15:46:18.688] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:46:18.816] Loaded PowerVR consumer services. [2025-09-23 15:46:18.944] Waiting data available... [2025-09-23 15:46:18.976] 512+0 records in [2025-09-23 15:46:18.976] 512+0 records out [2025-09-23 15:46:19.008] Starting syslogd/klogd: done [2025-09-23 15:46:19.024] DML Start [2025-09-23 15:46:19.183] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:46:19.407] DML res1: 0 [2025-09-23 15:46:19.855] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:46:19.876] Read Success [2025-09-23 15:46:19.876] Verifying certificate... [2025-09-23 15:46:20.116] Verified OK [2025-09-23 15:46:20.132] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:46:21.795] Verified OK [2025-09-23 15:46:21.795] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:46:22.428] Verified OK [2025-09-23 15:46:22.428] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:46:25.081] fs.protected_hardlinks = 1 [2025-09-23 15:46:25.081] fs.protected_symlinks = 1 [2025-09-23 15:46:25.098] kernel.modules_disabled = 1 [2025-09-23 15:46:25.290] [2025-09-23 15:46:25.290] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:46:26.471] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:46:34.248] SBL1:1210.0.1.0 [2025-09-23 15:46:34.280] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:46:35.863] SBL2:1210.0.1.0 [2025-09-23 15:46:35.909] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:46:36.007] j-A [2025-09-23 15:46:43.377] The R5 Autosar Classic is running [2025-09-23 15:46:43.377] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:46:43.377] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:46:43.984] INIT: version 2.96 booting [2025-09-23 15:46:44.096] INIT: Entering runlevel: 5 [2025-09-23 15:46:44.424] mtd24 attached [2025-09-23 15:46:44.424] mtd32 attached [2025-09-23 15:46:44.424] mtd28 attached [2025-09-23 15:46:44.424] RTNETLINK answers: File exists [2025-09-23 15:46:44.424] ubi0:textures is mounted. [2025-09-23 15:46:44.424] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:46:44.424] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:46:44.424] ubi1:dml_code is mounted. [2025-09-23 15:46:44.424] ubi2:animations is mounted. [2025-09-23 15:46:44.424] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:46:44.424] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:46:44.424] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:46:44.424] data.LB_FadeInType0=100 [2025-09-23 15:46:44.424] data.CHLH_FadeInType0=0 [2025-09-23 15:46:44.424] data.WU_FadeInDelay=0 [2025-09-23 15:46:44.424] max_time_out=0 [2025-09-23 15:46:44.424] No splash screen [2025-09-23 15:46:44.424] stop dss Done [2025-09-23 15:46:44.464] /dev/mem opened. [2025-09-23 15:46:44.464] Memory mapped at address 0xffff85a64000. [2025-09-23 15:46:44.464] Read at address 0x00600018 (0xffff85a64018): 0x00000000 [2025-09-23 15:46:44.464] Write at address 0x00600018 (0xffff85a64018): 0x00400040, readback 0x00400040 [2025-09-23 15:46:44.464] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:46:44.464] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:46:44.720] Loaded PowerVR consumer services. [2025-09-23 15:46:44.752] 512+0 records in [2025-09-23 15:46:44.752] 512+0 records out [2025-09-23 15:46:44.752] Waiting data available... [2025-09-23 15:46:44.799] Starting syslogd/klogd: done [2025-09-23 15:46:44.815] DML Start [2025-09-23 15:46:44.976] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:46:45.423] DML res1: 0 [2025-09-23 15:46:45.700] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:46:45.700] Read Success [2025-09-23 15:46:45.700] Verifying certificate... [2025-09-23 15:46:45.924] Verified OK [2025-09-23 15:46:45.956] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:46:47.621] Verified OK [2025-09-23 15:46:47.621] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:46:48.234] Verified OK [2025-09-23 15:46:48.234] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:46:50.888] fs.protected_hardlinks = 1 [2025-09-23 15:46:50.904] fs.protected_symlinks = 1 [2025-09-23 15:46:50.904] kernel.modules_disabled = 1 [2025-09-23 15:46:51.112] [2025-09-23 15:46:51.112] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:46:52.288] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:47:00.067] SBL1:1210.0.1.0 [2025-09-23 15:47:00.099] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:47:01.681] SBL2:1210.0.1.0 [2025-09-23 15:47:01.986] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:47:01.986] j-A [2025-09-23 15:47:09.179] The R5 Autosar Classic is running [2025-09-23 15:47:09.179] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:47:09.200] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:47:09.808] INIT: version 2.96 booting [2025-09-23 15:47:09.919] INIT: Entering runlevel: 5 [2025-09-23 15:47:10.079] mtd32 attached [2025-09-23 15:47:10.079] mtd28 attached [2025-09-23 15:47:10.095] mtd24 attached [2025-09-23 15:47:10.143] RTNETLINK answers: File exists [2025-09-23 15:47:10.143] ubi0:dml_code is mounted. [2025-09-23 15:47:10.234] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:47:10.234] ubi2:textures is mounted. [2025-09-23 15:47:10.234] ubi1:animations is mounted. [2025-09-23 15:47:10.234] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:47:10.234] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:47:10.234] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:47:10.234] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:47:10.234] data.LB_FadeInType0=100 [2025-09-23 15:47:10.234] data.CHLH_FadeInType0=0 [2025-09-23 15:47:10.234] data.WU_FadeInDelay=0 [2025-09-23 15:47:10.234] max_time_out=0 [2025-09-23 15:47:10.234] No splash screen [2025-09-23 15:47:10.234] stop dss Done [2025-09-23 15:47:10.241] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:47:10.273] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:47:10.273] /dev/mem opened. [2025-09-23 15:47:10.273] Memory mapped at address 0xffff80133000. [2025-09-23 15:47:10.273] Read at address 0x00600018 (0xffff80133018): 0x00000000 [2025-09-23 15:47:10.273] Write at address 0x00600018 (0xffff80133018): 0x00400040, readback 0x00400040 [2025-09-23 15:47:10.512] Loaded PowerVR consumer services. [2025-09-23 15:47:10.560] Waiting data available... [2025-09-23 15:47:10.576] 512+0 records in [2025-09-23 15:47:10.576] 512+0 records out [2025-09-23 15:47:10.624] Starting syslogd/klogd: done [2025-09-23 15:47:10.640] DML Start [2025-09-23 15:47:10.784] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:47:11.237] DML res1: 0 [2025-09-23 15:47:11.468] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:47:11.468] Read Success [2025-09-23 15:47:11.468] Verifying certificate... [2025-09-23 15:47:11.707] Verified OK [2025-09-23 15:47:11.724] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:47:13.414] Verified OK [2025-09-23 15:47:13.414] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:47:14.046] Verified OK [2025-09-23 15:47:14.046] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:47:16.587] fs.protected_hardlinks = 1 [2025-09-23 15:47:16.587] fs.protected_symlinks = 1 [2025-09-23 15:47:16.603] kernel.modules_disabled = 1 [2025-09-23 15:47:16.810] [2025-09-23 15:47:16.810] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:47:18.058] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:47:25.831] SBL1:1210.0.1.0 [2025-09-23 15:47:25.879] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:47:27.445] SBL2:1210.0.1.0 [2025-09-23 15:47:27.493] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:47:27.589] j-A [2025-09-23 15:47:34.942] The R5 Autosar Classic is running [2025-09-23 15:47:34.964] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:47:34.964] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:47:35.571] INIT: version 2.96 booting [2025-09-23 15:47:35.971] INIT: Entering runlevel: 5 [2025-09-23 15:47:35.971] mtd24 attached [2025-09-23 15:47:35.971] mtd32 attached [2025-09-23 15:47:35.971] mtd28 attached [2025-09-23 15:47:35.971] RTNETLINK answers: File exists [2025-09-23 15:47:35.971] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:47:35.971] ubi2:animations is mounted. [2025-09-23 15:47:35.971] ubi1:dml_code is mounted. [2025-09-23 15:47:35.971] ubi0:textures is mounted. [2025-09-23 15:47:35.971] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:47:35.971] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:47:35.971] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:47:35.971] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:47:35.971] data.LB_FadeInType0=100 [2025-09-23 15:47:35.971] data.CHLH_FadeInType0=0 [2025-09-23 15:47:35.971] data.WU_FadeInDelay=0 [2025-09-23 15:47:35.971] max_time_out=0 [2025-09-23 15:47:35.971] No splash screen [2025-09-23 15:47:35.971] stop dss Done [2025-09-23 15:47:36.014] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:47:36.014] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:47:36.014] /dev/mem opened. [2025-09-23 15:47:36.014] Memory mapped at address 0xffffb009b000. [2025-09-23 15:47:36.040] Read at address 0x00600018 (0xffffb009b018): 0x00000000 [2025-09-23 15:47:36.040] Write at address 0x00600018 (0xffffb009b018): 0x00400040, readback 0x00400040 [2025-09-23 15:47:36.248] Loaded PowerVR consumer services. [2025-09-23 15:47:36.313] Waiting data available... [2025-09-23 15:47:36.329] 512+0 records in [2025-09-23 15:47:36.329] 512+0 records out [2025-09-23 15:47:36.376] Starting syslogd/klogd: done [2025-09-23 15:47:36.392] DML Start [2025-09-23 15:47:36.536] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:47:36.986] DML res1: 0 [2025-09-23 15:47:37.206] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:47:37.206] Read Success [2025-09-23 15:47:37.206] Verifying certificate... [2025-09-23 15:47:37.493] Verified OK [2025-09-23 15:47:37.525] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:47:39.173] Verified OK [2025-09-23 15:47:39.173] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:47:39.806] Verified OK [2025-09-23 15:47:39.806] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:47:42.364] fs.protected_hardlinks = 1 [2025-09-23 15:47:42.364] fs.protected_symlinks = 1 [2025-09-23 15:47:42.380] kernel.modules_disabled = 1 [2025-09-23 15:47:42.572] [2025-09-23 15:47:42.572] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:47:43.789] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:47:51.624] SBL1:1210.0.1.0 [2025-09-23 15:47:51.672] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:47:53.238] SBL2:1210.0.1.0 [2025-09-23 15:47:53.286] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:47:53.382] j-A [2025-09-23 15:48:00.735] The R5 Autosar Classic is running [2025-09-23 15:48:00.760] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:48:00.760] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:48:01.367] INIT: version 2.96 booting [2025-09-23 15:48:01.479] INIT: Entering runlevel: 5 [2025-09-23 15:48:01.801] mtd24 attached [2025-09-23 15:48:01.801] mtd28 attached [2025-09-23 15:48:01.801] mtd32 attached [2025-09-23 15:48:01.801] ubi0:textures is mounted. [2025-09-23 15:48:01.801] RTNETLINK answers: File exists [2025-09-23 15:48:01.801] ubi1:animations is mounted. [2025-09-23 15:48:01.801] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:48:01.801] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:48:01.801] ubi2:dml_code is mounted. [2025-09-23 15:48:01.801] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:48:01.801] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:48:01.801] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:48:01.801] data.LB_FadeInType0=100 [2025-09-23 15:48:01.801] data.CHLH_FadeInType0=0 [2025-09-23 15:48:01.801] data.WU_FadeInDelay=0 [2025-09-23 15:48:01.801] max_time_out=0 [2025-09-23 15:48:01.801] No splash screen [2025-09-23 15:48:01.801] stop dss Done [2025-09-23 15:48:01.822] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:48:01.854] /dev/mem opened. [2025-09-23 15:48:01.854] Memory mapped at address 0xffffa9a8b000. [2025-09-23 15:48:01.854] Read at address 0x00600018 (0xffffa9a8b018): 0x00000000 [2025-09-23 15:48:01.854] Write at address 0x00600018 (0xffffa9a8b018): 0x00400040, readback 0x00400040 [2025-09-23 15:48:01.854] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:48:01.966] Loaded PowerVR consumer services. [2025-09-23 15:48:02.109] Waiting data available... [2025-09-23 15:48:02.109] 512+0 records in [2025-09-23 15:48:02.109] 512+0 records out [2025-09-23 15:48:02.141] Starting syslogd/klogd: done [2025-09-23 15:48:02.173] DML Start [2025-09-23 15:48:02.332] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:48:02.799] DML res1: 0 [2025-09-23 15:48:03.052] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:48:03.052] Read Success [2025-09-23 15:48:03.067] Verifying certificate... [2025-09-23 15:48:03.307] Verified OK [2025-09-23 15:48:03.323] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:48:04.995] Verified OK [2025-09-23 15:48:04.995] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:48:05.553] Verified OK [2025-09-23 15:48:05.553] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:48:08.123] fs.protected_hardlinks = 1 [2025-09-23 15:48:08.123] fs.protected_symlinks = 1 [2025-09-23 15:48:08.123] kernel.modules_disabled = 1 [2025-09-23 15:48:08.300] [2025-09-23 15:48:08.300] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:48:09.617] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:48:17.392] SBL1:1210.0.1.0 [2025-09-23 15:48:17.440] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:48:19.006] SBL2:1210.0.1.0 [2025-09-23 15:48:19.054] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:48:19.166] j-A [2025-09-23 15:48:26.504] The R5 Autosar Classic is running [2025-09-23 15:48:26.535] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:48:26.535] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:48:27.142] INIT: version 2.96 booting [2025-09-23 15:48:27.254] INIT: Entering runlevel: 5 [2025-09-23 15:48:27.536] mtd24 attached [2025-09-23 15:48:27.536] mtd28 attached [2025-09-23 15:48:27.536] mtd32 attached [2025-09-23 15:48:27.536] ubi0:textures is mounted. [2025-09-23 15:48:27.536] RTNETLINK answers: File exists [2025-09-23 15:48:27.536] ubi1:animations is mounted. [2025-09-23 15:48:27.536] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:48:27.536] ubi2:dml_code is mounted. [2025-09-23 15:48:27.536] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:48:27.536] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:48:27.536] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:48:27.536] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:48:27.536] data.LB_FadeInType0=100 [2025-09-23 15:48:27.536] data.CHLH_FadeInType0=0 [2025-09-23 15:48:27.536] data.WU_FadeInDelay=0 [2025-09-23 15:48:27.536] max_time_out=0 [2025-09-23 15:48:27.536] No splash screen [2025-09-23 15:48:27.536] stop dss Done [2025-09-23 15:48:27.566] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:48:27.582] /dev/mem opened. [2025-09-23 15:48:27.614] Memory mapped at address 0xffff9e6ff000. [2025-09-23 15:48:27.614] Read at address 0x00600018 (0xffff9e6ff018): 0x00000000 [2025-09-23 15:48:27.614] Write at address 0x00600018 (0xffff9e6ff018): 0x00400040, readback 0x00400040 [2025-09-23 15:48:27.614] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:48:27.789] Loaded PowerVR consumer services. [2025-09-23 15:48:27.900] Waiting data available... [2025-09-23 15:48:27.900] 512+0 records in [2025-09-23 15:48:27.900] 512+0 records out [2025-09-23 15:48:27.932] Starting syslogd/klogd: done [2025-09-23 15:48:27.948] DML Start [2025-09-23 15:48:28.140] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:48:28.380] DML res1: 0 [2025-09-23 15:48:28.759] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:48:28.759] Read Success [2025-09-23 15:48:28.759] Verifying certificate... [2025-09-23 15:48:29.046] Verified OK [2025-09-23 15:48:29.062] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:48:30.837] Verified OK [2025-09-23 15:48:30.837] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:48:31.349] Verified OK [2025-09-23 15:48:31.349] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:48:33.859] fs.protected_hardlinks = 1 [2025-09-23 15:48:33.859] fs.protected_symlinks = 1 [2025-09-23 15:48:33.875] kernel.modules_disabled = 1 [2025-09-23 15:48:34.050] [2025-09-23 15:48:34.050] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:48:35.457] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:48:43.169] SBL1:1210.0.1.0 [2025-09-23 15:48:43.217] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:48:44.784] SBL2:1210.0.1.0 [2025-09-23 15:48:44.832] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:48:44.928] j-A [2025-09-23 15:48:52.281] The R5 Autosar Classic is running [2025-09-23 15:48:52.304] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:48:52.304] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:48:52.912] INIT: version 2.96 booting [2025-09-23 15:48:53.316] INIT: Entering runlevel: 5 [2025-09-23 15:48:53.316] mtd24 attached [2025-09-23 15:48:53.316] mtd28 attached [2025-09-23 15:48:53.316] mtd32 attached [2025-09-23 15:48:53.316] ubi0:textures is mounted. [2025-09-23 15:48:53.316] RTNETLINK answers: File exists [2025-09-23 15:48:53.316] ubi1:animations is mounted. [2025-09-23 15:48:53.316] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:48:53.316] ubi2:dml_code is mounted. [2025-09-23 15:48:53.316] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:48:53.316] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:48:53.316] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:48:53.316] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:48:53.316] data.LB_FadeInType0=100 [2025-09-23 15:48:53.316] data.CHLH_FadeInType0=0 [2025-09-23 15:48:53.316] data.WU_FadeInDelay=0 [2025-09-23 15:48:53.316] max_time_out=0 [2025-09-23 15:48:53.316] No splash screen [2025-09-23 15:48:53.316] stop dss Done [2025-09-23 15:48:53.382] /dev/mem opened. [2025-09-23 15:48:53.382] Memory mapped at address 0xffffadea1000. [2025-09-23 15:48:53.382] Read at address 0x00600018 (0xffffadea1018): 0x00000000 [2025-09-23 15:48:53.382] Write at address 0x00600018 (0xffffadea1018): 0x00400040, readback 0x00400040 [2025-09-23 15:48:53.382] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:48:53.382] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:48:53.493] Loaded PowerVR consumer services. [2025-09-23 15:48:53.621] Waiting data available... [2025-09-23 15:48:53.637] 512+0 records in [2025-09-23 15:48:53.637] 512+0 records out [2025-09-23 15:48:53.685] Starting syslogd/klogd: done [2025-09-23 15:48:53.700] DML Start [2025-09-23 15:48:53.845] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:48:54.068] DML res1: 0 [2025-09-23 15:48:54.563] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:48:54.563] Read Success [2025-09-23 15:48:54.563] Verifying certificate... [2025-09-23 15:48:54.819] Verified OK [2025-09-23 15:48:54.851] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:48:56.568] Verified OK [2025-09-23 15:48:56.568] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:48:57.138] Verified OK [2025-09-23 15:48:57.138] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:48:59.760] fs.protected_hardlinks = 1 [2025-09-23 15:48:59.776] fs.protected_symlinks = 1 [2025-09-23 15:48:59.776] kernel.modules_disabled = 1 [2025-09-23 15:48:59.967] [2025-09-23 15:48:59.967] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:49:01.155] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:49:08.941] SBL1:1210.0.1.0 [2025-09-23 15:49:08.988] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:49:10.555] SBL2:1210.0.1.0 [2025-09-23 15:49:10.599] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:49:10.698] j-A [2025-09-23 15:49:18.053] The R5 Autosar Classic is running [2025-09-23 15:49:18.053] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:49:18.074] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:49:18.680] INIT: version 2.96 booting [2025-09-23 15:49:18.793] INIT: Entering runlevel: 5 [2025-09-23 15:49:18.937] mtd24 attached [2025-09-23 15:49:18.952] mtd32 attached [2025-09-23 15:49:18.968] mtd28 attached [2025-09-23 15:49:19.123] RTNETLINK answers: File exists [2025-09-23 15:49:19.123] ubi0:textures is mounted. [2025-09-23 15:49:19.124] ubi1:dml_code is mounted. [2025-09-23 15:49:19.124] ubi2:animations is mounted. [2025-09-23 15:49:19.124] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:49:19.124] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:49:19.124] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:49:19.124] data.LB_FadeInType0=100 [2025-09-23 15:49:19.124] data.CHLH_FadeInType0=0 [2025-09-23 15:49:19.124] data.WU_FadeInDelay=0 [2025-09-23 15:49:19.124] max_time_out=0 [2025-09-23 15:49:19.124] No splash screen [2025-09-23 15:49:19.124] stop dss Done [2025-09-23 15:49:19.124] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:49:19.124] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:49:19.124] /dev/mem opened. [2025-09-23 15:49:19.124] Memory mapped at address 0xffffaedea000. [2025-09-23 15:49:19.133] Read at address 0x00600018 (0xffffaedea018): 0x00000000 [2025-09-23 15:49:19.133] Write at address 0x00600018 (0xffffaedea018): 0x00400040, readback 0x00400040 [2025-09-23 15:49:19.180] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:49:19.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:49:19.261] Loaded PowerVR consumer services. [2025-09-23 15:49:19.420] Waiting data available... [2025-09-23 15:49:19.420] 512+0 records in [2025-09-23 15:49:19.420] 512+0 records out [2025-09-23 15:49:19.452] Starting syslogd/klogd: done [2025-09-23 15:49:19.468] DML Start [2025-09-23 15:49:19.660] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:49:19.899] DML res1: 0 [2025-09-23 15:49:20.329] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:49:20.329] Read Success [2025-09-23 15:49:20.329] Verifying certificate... [2025-09-23 15:49:20.585] Verified OK [2025-09-23 15:49:20.600] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:49:22.321] Verified OK [2025-09-23 15:49:22.321] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:49:22.910] Verified OK [2025-09-23 15:49:22.910] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:49:25.515] fs.protected_hardlinks = 1 [2025-09-23 15:49:25.537] fs.protected_symlinks = 1 [2025-09-23 15:49:25.537] kernel.modules_disabled = 1 [2025-09-23 15:49:25.723] [2025-09-23 15:49:25.723] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:49:26.987] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:49:34.719] SBL1:1210.0.1.0 [2025-09-23 15:49:34.751] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:49:36.333] SBL2:1210.0.1.0 [2025-09-23 15:49:36.381] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:49:36.478] j-A [2025-09-23 15:49:43.832] The R5 Autosar Classic is running [2025-09-23 15:49:43.832] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:49:43.852] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:49:44.460] INIT: version 2.96 booting [2025-09-23 15:49:44.572] INIT: Entering runlevel: 5 [2025-09-23 15:49:44.732] mtd32 attached [2025-09-23 15:49:44.732] mtd28 attached [2025-09-23 15:49:44.748] mtd24 attached [2025-09-23 15:49:44.796] ubi1:animations is mounted. [2025-09-23 15:49:44.796] RTNETLINK answers: File exists [2025-09-23 15:49:44.903] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:49:44.903] ubi0:dml_code is mounted. [2025-09-23 15:49:44.903] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:49:44.903] ubi2:textures is mounted. [2025-09-23 15:49:44.903] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:49:44.903] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:49:44.903] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:49:44.903] data.LB_FadeInType0=100 [2025-09-23 15:49:44.903] data.CHLH_FadeInType0=0 [2025-09-23 15:49:44.903] data.WU_FadeInDelay=0 [2025-09-23 15:49:44.903] max_time_out=0 [2025-09-23 15:49:44.903] No splash screen [2025-09-23 15:49:44.903] stop dss Done [2025-09-23 15:49:44.903] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:49:44.915] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:49:44.915] /dev/mem opened. [2025-09-23 15:49:44.915] Memory mapped at address 0xffffb178d000. [2025-09-23 15:49:44.915] Read at address 0x00600018 (0xffffb178d018): 0x00000000 [2025-09-23 15:49:44.915] Write at address 0x00600018 (0xffffb178d018): 0x00400040, readback 0x00400040 [2025-09-23 15:49:45.108] Loaded PowerVR consumer services. [2025-09-23 15:49:45.187] Waiting data available... [2025-09-23 15:49:45.219] 512+0 records in [2025-09-23 15:49:45.219] 512+0 records out [2025-09-23 15:49:45.267] Starting syslogd/klogd: done [2025-09-23 15:49:45.283] DML Start [2025-09-23 15:49:45.459] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:49:45.667] DML res1: 0 [2025-09-23 15:49:46.205] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:49:46.205] Read Success [2025-09-23 15:49:46.205] Verifying certificate... [2025-09-23 15:49:46.444] Verified OK [2025-09-23 15:49:46.460] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:49:48.170] Verified OK [2025-09-23 15:49:48.170] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:49:48.713] Verified OK [2025-09-23 15:49:48.734] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:49:51.165] fs.protected_hardlinks = 1 [2025-09-23 15:49:51.181] fs.protected_symlinks = 1 [2025-09-23 15:49:51.197] kernel.modules_disabled = 1 [2025-09-23 15:49:51.389] [2025-09-23 15:49:51.389] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:49:52.683] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:50:00.533] SBL1:1210.0.1.0 [2025-09-23 15:50:00.565] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:50:02.148] SBL2:1210.0.1.0 [2025-09-23 15:50:02.194] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:50:02.292] j-A [2025-09-23 15:50:09.665] The R5 Autosar Classic is running [2025-09-23 15:50:09.665] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:50:09.665] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:50:10.272] INIT: version 2.96 booting [2025-09-23 15:50:10.384] INIT: Entering runlevel: 5 [2025-09-23 15:50:10.709] mtd32 attached [2025-09-23 15:50:10.709] mtd24 attached [2025-09-23 15:50:10.709] mtd28 attached [2025-09-23 15:50:10.709] ubi0:dml_code is mounted. [2025-09-23 15:50:10.709] RTNETLINK answers: File exists [2025-09-23 15:50:10.709] ubi1:textures is mounted. [2025-09-23 15:50:10.709] ubi2:animations is mounted. [2025-09-23 15:50:10.709] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:50:10.709] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:50:10.709] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:50:10.709] data.LB_FadeInType0=100 [2025-09-23 15:50:10.709] data.CHLH_FadeInType0=0 [2025-09-23 15:50:10.709] data.WU_FadeInDelay=0 [2025-09-23 15:50:10.709] max_time_out=0 [2025-09-23 15:50:10.709] No splash screen [2025-09-23 15:50:10.709] stop dss Done [2025-09-23 15:50:10.709] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:50:10.709] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:50:10.744] /dev/mem opened. [2025-09-23 15:50:10.744] Memory mapped at address 0xffff8aac3000. [2025-09-23 15:50:10.744] Read at address 0x00600018 (0xffff8aac3018): 0x00000000 [2025-09-23 15:50:10.744] Write at address 0x00600018 (0xffff8aac3018): 0x00400040, readback 0x00400040 [2025-09-23 15:50:10.744] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:50:10.744] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:50:10.839] Loaded PowerVR consumer services. [2025-09-23 15:50:11.000] Waiting data available... [2025-09-23 15:50:11.016] 512+0 records in [2025-09-23 15:50:11.016] 512+0 records out [2025-09-23 15:50:11.048] Starting syslogd/klogd: done [2025-09-23 15:50:11.063] DML Start [2025-09-23 15:50:11.224] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:50:11.431] DML res1: 0 [2025-09-23 15:50:11.904] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:50:11.904] Read Success [2025-09-23 15:50:11.904] Verifying certificate... [2025-09-23 15:50:12.176] Verified OK [2025-09-23 15:50:12.176] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:50:13.904] Verified OK [2025-09-23 15:50:13.904] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:50:14.437] Verified OK [2025-09-23 15:50:14.437] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:50:16.896] fs.protected_hardlinks = 1 [2025-09-23 15:50:16.896] fs.protected_symlinks = 1 [2025-09-23 15:50:16.896] kernel.modules_disabled = 1 [2025-09-23 15:50:17.087] [2025-09-23 15:50:17.087] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:50:18.493] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:50:26.297] SBL1:1210.0.1.0 [2025-09-23 15:50:26.329] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:50:27.911] SBL2:1210.0.1.0 [2025-09-23 15:50:27.944] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:50:28.056] j-A [2025-09-23 15:50:35.429] The R5 Autosar Classic is running [2025-09-23 15:50:35.429] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:50:35.429] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:50:36.036] INIT: version 2.96 booting [2025-09-23 15:50:36.148] INIT: Entering runlevel: 5 [2025-09-23 15:50:36.475] mtd24 attached [2025-09-23 15:50:36.475] mtd28 attached [2025-09-23 15:50:36.475] ubi0:textures is mounted. [2025-09-23 15:50:36.475] mtd32 attached [2025-09-23 15:50:36.475] ubi1:animations is mounted. [2025-09-23 15:50:36.475] RTNETLINK answers: File exists [2025-09-23 15:50:36.475] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:50:36.475] ubi2:dml_code is mounted. [2025-09-23 15:50:36.475] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:50:36.475] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:50:36.475] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:50:36.475] data.LB_FadeInType0=100 [2025-09-23 15:50:36.475] data.CHLH_FadeInType0=0 [2025-09-23 15:50:36.475] data.WU_FadeInDelay=0 [2025-09-23 15:50:36.475] max_time_out=0 [2025-09-23 15:50:36.475] No splash screen [2025-09-23 15:50:36.475] stop dss Done [2025-09-23 15:50:36.475] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:50:36.475] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:50:36.480] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:50:36.480] /dev/mem opened. [2025-09-23 15:50:36.506] Memory mapped at address 0xffff86482000. [2025-09-23 15:50:36.506] Read at address 0x00600018 (0xffff86482018): 0x00000000 [2025-09-23 15:50:36.506] Write at address 0x00600018 (0xffff86482018): 0x00400040, readback 0x00400040 [2025-09-23 15:50:36.634] Loaded PowerVR consumer services. [2025-09-23 15:50:36.762] Waiting data available... [2025-09-23 15:50:36.778] 512+0 records in [2025-09-23 15:50:36.778] 512+0 records out [2025-09-23 15:50:36.809] Starting syslogd/klogd: done [2025-09-23 15:50:36.825] DML Start [2025-09-23 15:50:37.018] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:50:37.489] DML res1: 0 [2025-09-23 15:50:37.656] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:50:37.656] Read Success [2025-09-23 15:50:37.656] Verifying certificate... [2025-09-23 15:50:37.896] Verified OK [2025-09-23 15:50:37.912] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:50:39.494] Verified OK [2025-09-23 15:50:39.494] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:50:40.150] Verified OK [2025-09-23 15:50:40.150] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:50:42.835] fs.protected_hardlinks = 1 [2025-09-23 15:50:42.851] fs.protected_symlinks = 1 [2025-09-23 15:50:42.851] kernel.modules_disabled = 1 [2025-09-23 15:50:43.043] [2025-09-23 15:50:43.043] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:50:44.338] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:50:52.071] SBL1:1210.0.1.0 [2025-09-23 15:50:52.119] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:50:53.686] SBL2:1210.0.1.0 [2025-09-23 15:50:53.734] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:50:53.830] j-A [2025-09-23 15:51:01.184] The R5 Autosar Classic is running [2025-09-23 15:51:01.208] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:51:01.208] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:51:01.816] INIT: version 2.96 booting [2025-09-23 15:51:01.974] INIT: Entering runlevel: 5 [2025-09-23 15:51:02.088] mtd32 attached [2025-09-23 15:51:02.088] mtd28 attached [2025-09-23 15:51:02.103] mtd24 attached [2025-09-23 15:51:02.152] RTNETLINK answers: File exists [2025-09-23 15:51:02.214] ubi1:animations is mounted. [2025-09-23 15:51:02.214] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:51:02.214] ubi2:textures is mounted. [2025-09-23 15:51:02.214] ubi0:dml_code is mounted. [2025-09-23 15:51:02.214] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:51:02.214] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:51:02.214] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:51:02.214] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:51:02.214] data.LB_FadeInType0=100 [2025-09-23 15:51:02.214] data.CHLH_FadeInType0=0 [2025-09-23 15:51:02.214] data.WU_FadeInDelay=0 [2025-09-23 15:51:02.214] max_time_out=0 [2025-09-23 15:51:02.214] No splash screen [2025-09-23 15:51:02.214] stop dss Done [2025-09-23 15:51:02.262] /dev/mem opened. [2025-09-23 15:51:02.262] Memory mapped at address 0xffff99b44000. [2025-09-23 15:51:02.305] Read at address 0x00600018 (0xffff99b44018): 0x00000000 [2025-09-23 15:51:02.305] Write at address 0x00600018 (0xffff99b44018): 0x00400040, readback 0x00400040 [2025-09-23 15:51:02.305] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:51:02.305] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:51:02.560] Loaded PowerVR consumer services. [2025-09-23 15:51:02.560] Waiting data available... [2025-09-23 15:51:02.575] 512+0 records in [2025-09-23 15:51:02.575] 512+0 records out [2025-09-23 15:51:02.623] Starting syslogd/klogd: done [2025-09-23 15:51:02.640] DML Start [2025-09-23 15:51:02.783] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:51:03.000] DML res1: 0 [2025-09-23 15:51:03.547] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:51:03.547] Read Success [2025-09-23 15:51:03.547] Verifying certificate... [2025-09-23 15:51:03.818] Verified OK [2025-09-23 15:51:03.834] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:51:05.376] Verified OK [2025-09-23 15:51:05.376] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:51:06.030] Verified OK [2025-09-23 15:51:06.030] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:51:08.700] fs.protected_hardlinks = 1 [2025-09-23 15:51:08.716] fs.protected_symlinks = 1 [2025-09-23 15:51:08.716] kernel.modules_disabled = 1 [2025-09-23 15:51:08.908] [2025-09-23 15:51:08.908] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:51:10.059] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:51:17.883] SBL1:1210.0.1.0 [2025-09-23 15:51:17.914] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:51:19.497] SBL2:1210.0.1.0 [2025-09-23 15:51:19.538] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:51:19.642] j-A [2025-09-23 15:51:27.016] The R5 Autosar Classic is running [2025-09-23 15:51:27.016] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:51:27.016] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:51:27.623] INIT: version 2.96 booting [2025-09-23 15:51:27.735] INIT: Entering runlevel: 5 [2025-09-23 15:51:28.037] mtd24 attached [2025-09-23 15:51:28.037] mtd32 attached [2025-09-23 15:51:28.037] mtd28 attached [2025-09-23 15:51:28.037] ubi0:textures is mounted. [2025-09-23 15:51:28.037] ubi1:dml_code is mounted. [2025-09-23 15:51:28.037] RTNETLINK answers: File exists [2025-09-23 15:51:28.037] ubi2:animations is mounted. [2025-09-23 15:51:28.037] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:51:28.037] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:51:28.037] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:51:28.037] data.LB_FadeInType0=100 [2025-09-23 15:51:28.037] data.CHLH_FadeInType0=0 [2025-09-23 15:51:28.037] data.WU_FadeInDelay=0 [2025-09-23 15:51:28.037] max_time_out=0 [2025-09-23 15:51:28.037] No splash screen [2025-09-23 15:51:28.037] stop dss Done [2025-09-23 15:51:28.037] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:51:28.037] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:51:28.051] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:51:28.051] /dev/mem opened. [2025-09-23 15:51:28.084] Memory mapped at address 0xffff9629d000. [2025-09-23 15:51:28.084] Read at address 0x00600018 (0xffff9629d018): 0x00000000 [2025-09-23 15:51:28.084] Write at address 0x00600018 (0xffff9629d018): 0x00400040, readback 0x00400040 [2025-09-23 15:51:28.084] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:51:28.323] Loaded PowerVR consumer services. [2025-09-23 15:51:28.340] Waiting data available... [2025-09-23 15:51:28.372] 512+0 records in [2025-09-23 15:51:28.388] 512+0 records out [2025-09-23 15:51:28.419] Starting syslogd/klogd: done [2025-09-23 15:51:28.436] DML Start [2025-09-23 15:51:28.579] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:51:29.052] DML res1: 0 [2025-09-23 15:51:29.219] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:51:29.241] Read Success [2025-09-23 15:51:29.241] Verifying certificate... [2025-09-23 15:51:29.495] Verified OK [2025-09-23 15:51:29.511] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:51:31.150] Verified OK [2025-09-23 15:51:31.150] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:51:31.803] Verified OK [2025-09-23 15:51:31.803] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:51:34.456] fs.protected_hardlinks = 1 [2025-09-23 15:51:34.456] fs.protected_symlinks = 1 [2025-09-23 15:51:34.472] kernel.modules_disabled = 1 [2025-09-23 15:51:34.648] [2025-09-23 15:51:34.648] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:51:35.898] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:51:43.636] SBL1:1210.0.1.0 [2025-09-23 15:51:43.684] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:51:45.252] SBL2:1210.0.1.0 [2025-09-23 15:51:45.300] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:51:45.395] j-A [2025-09-23 15:51:52.768] The R5 Autosar Classic is running [2025-09-23 15:51:52.773] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:51:52.773] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:51:53.380] INIT: version 2.96 booting [2025-09-23 15:51:53.492] INIT: Entering runlevel: 5 [2025-09-23 15:51:53.653] mtd24 attached [2025-09-23 15:51:53.773] mtd32 attached [2025-09-23 15:51:53.773] mtd28 attached [2025-09-23 15:51:53.774] ubi0:textures is mounted. [2025-09-23 15:51:53.783] RTNETLINK answers: File exists [2025-09-23 15:51:53.783] ubi2:animations is mounted. [2025-09-23 15:51:53.783] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:51:53.783] ubi1:dml_code is mounted. [2025-09-23 15:51:53.783] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:51:53.783] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:51:53.783] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:51:53.783] data.LB_FadeInType0=100 [2025-09-23 15:51:53.783] data.CHLH_FadeInType0=0 [2025-09-23 15:51:53.783] data.WU_FadeInDelay=0 [2025-09-23 15:51:53.783] max_time_out=0 [2025-09-23 15:51:53.783] No splash screen [2025-09-23 15:51:53.783] stop dss Done [2025-09-23 15:51:53.783] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:51:53.857] /dev/mem opened. [2025-09-23 15:51:53.857] Memory mapped at address 0xffff82caf000. [2025-09-23 15:51:53.857] Read at address 0x00600018 (0xffff82caf018): 0x00000000 [2025-09-23 15:51:53.857] Write at address 0x00600018 (0xffff82caf018): 0x00400040, readback 0x00400040 [2025-09-23 15:51:53.873] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:51:53.889] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:51:53.969] Loaded PowerVR consumer services. [2025-09-23 15:51:54.113] Waiting data available... [2025-09-23 15:51:54.113] 512+0 records in [2025-09-23 15:51:54.113] 512+0 records out [2025-09-23 15:51:54.145] Starting syslogd/klogd: done [2025-09-23 15:51:54.161] DML Start [2025-09-23 15:51:54.336] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:51:54.787] DML res1: 0 [2025-09-23 15:51:55.021] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:51:55.021] Read Success [2025-09-23 15:51:55.021] Verifying certificate... [2025-09-23 15:51:55.261] Verified OK [2025-09-23 15:51:55.277] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:51:56.934] Verified OK [2025-09-23 15:51:56.934] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:51:57.534] Verified OK [2025-09-23 15:51:57.534] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:52:00.220] fs.protected_hardlinks = 1 [2025-09-23 15:52:00.235] fs.protected_symlinks = 1 [2025-09-23 15:52:00.235] kernel.modules_disabled = 1 [2025-09-23 15:52:00.443] [2025-09-23 15:52:00.443] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:52:01.619] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:52:09.420] SBL1:1210.0.1.0 [2025-09-23 15:52:09.468] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:52:11.035] SBL2:1210.0.1.0 [2025-09-23 15:52:11.083] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:52:11.178] j-A [2025-09-23 15:52:18.532] The R5 Autosar Classic is running [2025-09-23 15:52:18.556] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:52:18.556] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:52:19.164] INIT: version 2.96 booting [2025-09-23 15:52:19.584] INIT: Entering runlevel: 5 [2025-09-23 15:52:19.584] mtd28 attached [2025-09-23 15:52:19.584] mtd32 attached [2025-09-23 15:52:19.584] mtd24 attached [2025-09-23 15:52:19.584] ubi0:animations is mounted. [2025-09-23 15:52:19.584] RTNETLINK answers: File exists [2025-09-23 15:52:19.584] ubi1:dml_code is mounted. [2025-09-23 15:52:19.584] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:52:19.584] ubi2:textures is mounted. [2025-09-23 15:52:19.584] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:52:19.584] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:52:19.584] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:52:19.584] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:52:19.584] data.LB_FadeInType0=100 [2025-09-23 15:52:19.584] data.CHLH_FadeInType0=0 [2025-09-23 15:52:19.584] data.WU_FadeInDelay=0 [2025-09-23 15:52:19.584] max_time_out=0 [2025-09-23 15:52:19.584] No splash screen [2025-09-23 15:52:19.584] stop dss Done [2025-09-23 15:52:19.617] /dev/mem opened. [2025-09-23 15:52:19.617] Memory mapped at address 0xfffface9d000. [2025-09-23 15:52:19.643] Read at address 0x00600018 (0xfffface9d018): 0x00000000 [2025-09-23 15:52:19.643] Write at address 0x00600018 (0xfffface9d018): 0x00400040, readback 0x00400040 [2025-09-23 15:52:19.643] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:52:19.660] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:52:19.787] Loaded PowerVR consumer services. [2025-09-23 15:52:19.899] Waiting data available... [2025-09-23 15:52:19.915] 512+0 records in [2025-09-23 15:52:19.931] 512+0 records out [2025-09-23 15:52:19.978] Starting syslogd/klogd: done [2025-09-23 15:52:19.995] DML Start [2025-09-23 15:52:20.171] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:52:20.411] DML res1: 0 [2025-09-23 15:52:20.856] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:52:20.856] Read Success [2025-09-23 15:52:20.856] Verifying certificate... [2025-09-23 15:52:21.143] Verified OK [2025-09-23 15:52:21.159] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:52:22.821] Verified OK [2025-09-23 15:52:22.821] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:52:23.461] Verified OK [2025-09-23 15:52:23.461] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:52:26.181] fs.protected_hardlinks = 1 [2025-09-23 15:52:26.181] fs.protected_symlinks = 1 [2025-09-23 15:52:26.181] kernel.modules_disabled = 1 [2025-09-23 15:52:26.387] [2025-09-23 15:52:26.387] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:52:27.486] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:52:35.185] SBL1:1210.0.1.0 [2025-09-23 15:52:35.233] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:52:36.800] SBL2:1210.0.1.0 [2025-09-23 15:52:36.848] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:52:36.944] j-A [2025-09-23 15:52:44.298] The R5 Autosar Classic is running [2025-09-23 15:52:44.322] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:52:44.322] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:52:44.929] INIT: version 2.96 booting [2025-09-23 15:52:45.041] INIT: Entering runlevel: 5 [2025-09-23 15:52:45.201] mtd24 attached [2025-09-23 15:52:45.201] mtd32 attached [2025-09-23 15:52:45.217] mtd28 attached [2025-09-23 15:52:45.233] ubi0:textures is mounted. [2025-09-23 15:52:45.340] RTNETLINK answers: File exists [2025-09-23 15:52:45.340] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:52:45.340] ubi1:dml_code is mounted. [2025-09-23 15:52:45.340] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:52:45.340] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:52:45.340] ubi2:animations is mounted. [2025-09-23 15:52:45.340] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:52:45.340] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:52:45.340] data.LB_FadeInType0=100 [2025-09-23 15:52:45.340] data.CHLH_FadeInType0=0 [2025-09-23 15:52:45.340] data.WU_FadeInDelay=0 [2025-09-23 15:52:45.340] max_time_out=0 [2025-09-23 15:52:45.340] No splash screen [2025-09-23 15:52:45.340] stop dss Done [2025-09-23 15:52:45.406] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:52:45.406] /dev/mem opened. [2025-09-23 15:52:45.406] Memory mapped at address 0xffff95c9d000. [2025-09-23 15:52:45.406] Read at address 0x00600018 (0xffff95c9d018): 0x00000000 [2025-09-23 15:52:45.406] Write at address 0x00600018 (0xffff95c9d018): 0x00400040, readback 0x00400040 [2025-09-23 15:52:45.406] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:52:45.549] Loaded PowerVR consumer services. [2025-09-23 15:52:45.678] Waiting data available... [2025-09-23 15:52:45.694] 512+0 records in [2025-09-23 15:52:45.694] 512+0 records out [2025-09-23 15:52:45.726] Starting syslogd/klogd: done [2025-09-23 15:52:45.743] DML Start [2025-09-23 15:52:45.886] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:52:46.350] DML res1: 0 [2025-09-23 15:52:46.629] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:52:46.629] Read Success [2025-09-23 15:52:46.629] Verifying certificate... [2025-09-23 15:52:46.885] Verified OK [2025-09-23 15:52:46.901] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:52:48.509] Verified OK [2025-09-23 15:52:48.509] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:52:49.115] Verified OK [2025-09-23 15:52:49.115] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:52:51.672] fs.protected_hardlinks = 1 [2025-09-23 15:52:51.703] fs.protected_symlinks = 1 [2025-09-23 15:52:51.703] kernel.modules_disabled = 1 [2025-09-23 15:52:51.880] [2025-09-23 15:52:51.880] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:52:53.157] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:53:00.954] SBL1:1210.0.1.0 [2025-09-23 15:53:00.986] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:53:02.569] SBL2:1210.0.1.0 [2025-09-23 15:53:02.601] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:53:02.713] j-A [2025-09-23 15:53:10.084] The R5 Autosar Classic is running [2025-09-23 15:53:10.084] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:53:10.084] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:53:10.691] INIT: version 2.96 booting [2025-09-23 15:53:11.132] INIT: Entering runlevel: 5 [2025-09-23 15:53:11.133] mtd24 attached [2025-09-23 15:53:11.133] mtd32 attached [2025-09-23 15:53:11.133] mtd28 attached [2025-09-23 15:53:11.133] ubi0:textures is mounted. [2025-09-23 15:53:11.133] RTNETLINK answers: File exists [2025-09-23 15:53:11.133] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:53:11.133] ubi2:animations is mounted. [2025-09-23 15:53:11.133] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:53:11.133] ubi1:dml_code is mounted. [2025-09-23 15:53:11.133] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:53:11.133] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:53:11.133] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:53:11.133] data.LB_FadeInType0=100 [2025-09-23 15:53:11.133] data.CHLH_FadeInType0=0 [2025-09-23 15:53:11.133] data.WU_FadeInDelay=0 [2025-09-23 15:53:11.133] max_time_out=0 [2025-09-23 15:53:11.133] No splash screen [2025-09-23 15:53:11.133] stop dss Done [2025-09-23 15:53:11.157] /dev/mem opened. [2025-09-23 15:53:11.157] Memory mapped at address 0xffffb4ace000. [2025-09-23 15:53:11.157] Read at address 0x00600018 (0xffffb4ace018): 0x00000000 [2025-09-23 15:53:11.157] Write at address 0x00600018 (0xffffb4ace018): 0x00400040, readback 0x00400040 [2025-09-23 15:53:11.157] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:53:11.157] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:53:11.300] Loaded PowerVR consumer services. [2025-09-23 15:53:11.428] Waiting data available... [2025-09-23 15:53:11.444] 512+0 records in [2025-09-23 15:53:11.444] 512+0 records out [2025-09-23 15:53:11.492] Starting syslogd/klogd: done [2025-09-23 15:53:11.508] DML Start [2025-09-23 15:53:11.700] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:53:11.924] DML res1: 0 [2025-09-23 15:53:12.335] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:53:12.335] Read Success [2025-09-23 15:53:12.335] Verifying certificate... [2025-09-23 15:53:12.543] Verified OK [2025-09-23 15:53:12.559] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:53:14.157] Verified OK [2025-09-23 15:53:14.157] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:53:14.775] Verified OK [2025-09-23 15:53:14.775] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:53:17.460] fs.protected_hardlinks = 1 [2025-09-23 15:53:17.460] fs.protected_symlinks = 1 [2025-09-23 15:53:17.476] kernel.modules_disabled = 1 [2025-09-23 15:53:17.669] [2025-09-23 15:53:17.669] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:53:19.033] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:53:26.720] SBL1:1210.0.1.0 [2025-09-23 15:53:26.768] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:53:28.351] SBL2:1210.0.1.0 [2025-09-23 15:53:28.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:53:28.495] j-A [2025-09-23 15:53:35.866] The R5 Autosar Classic is running [2025-09-23 15:53:35.866] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:53:35.866] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:53:36.473] INIT: version 2.96 booting [2025-09-23 15:53:36.585] INIT: Entering runlevel: 5 [2025-09-23 15:53:36.745] mtd32 attached [2025-09-23 15:53:36.745] mtd24 attached [2025-09-23 15:53:36.761] mtd28 attached [2025-09-23 15:53:36.777] ubi0:dml_code is mounted. [2025-09-23 15:53:36.809] RTNETLINK answers: File exists [2025-09-23 15:53:36.809] ubi1:textures is mounted. [2025-09-23 15:53:36.868] ubi2:animations is mounted. [2025-09-23 15:53:36.868] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:53:36.868] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:53:36.868] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:53:36.868] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:53:36.868] data.LB_FadeInType0=100 [2025-09-23 15:53:36.868] data.CHLH_FadeInType0=0 [2025-09-23 15:53:36.868] data.WU_FadeInDelay=0 [2025-09-23 15:53:36.868] max_time_out=0 [2025-09-23 15:53:36.868] No splash screen [2025-09-23 15:53:36.868] stop dss Done [2025-09-23 15:53:36.868] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:53:36.900] /dev/mem opened. [2025-09-23 15:53:36.900] Memory mapped at address 0xffff8c05f000. [2025-09-23 15:53:36.925] Read at address 0x00600018 (0xffff8c05f018): 0x00000000 [2025-09-23 15:53:36.925] Write at address 0x00600018 (0xffff8c05f018): 0x00400040, readback 0x00400040 [2025-09-23 15:53:36.941] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:53:36.958] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:53:37.102] Loaded PowerVR consumer services. [2025-09-23 15:53:37.213] Waiting data available... [2025-09-23 15:53:37.229] 512+0 records in [2025-09-23 15:53:37.229] 512+0 records out [2025-09-23 15:53:37.648] Starting syslogd/klogd: done [2025-09-23 15:53:37.649] DML Start [2025-09-23 15:53:37.649] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:53:37.677] DML res1: 0 [2025-09-23 15:53:38.187] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:53:38.187] Read Success [2025-09-23 15:53:38.187] Verifying certificate... [2025-09-23 15:53:38.442] Verified OK [2025-09-23 15:53:38.664] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:53:40.159] Verified OK [2025-09-23 15:53:40.159] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:53:40.763] Verified OK [2025-09-23 15:53:40.763] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:53:43.321] fs.protected_hardlinks = 1 [2025-09-23 15:53:43.321] fs.protected_symlinks = 1 [2025-09-23 15:53:43.337] kernel.modules_disabled = 1 [2025-09-23 15:53:43.529] [2025-09-23 15:53:43.529] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:53:44.727] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:53:52.494] SBL1:1210.0.1.0 [2025-09-23 15:53:52.542] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:53:54.109] SBL2:1210.0.1.0 [2025-09-23 15:53:54.157] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:53:54.268] j-A [2025-09-23 15:54:01.637] The R5 Autosar Classic is running [2025-09-23 15:54:01.637] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:54:01.637] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:54:02.244] INIT: version 2.96 booting [2025-09-23 15:54:02.340] INIT: Entering runlevel: 5 [2025-09-23 15:54:02.500] mtd24 attached [2025-09-23 15:54:02.516] mtd32 attached [2025-09-23 15:54:02.532] mtd28 attached [2025-09-23 15:54:02.581] RTNETLINK answers: File exists [2025-09-23 15:54:02.581] ubi0:textures is mounted. [2025-09-23 15:54:02.641] ubi1:dml_code is mounted. [2025-09-23 15:54:02.641] ubi2:animations is mounted. [2025-09-23 15:54:02.641] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:54:02.641] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:54:02.641] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:54:02.641] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:54:02.641] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:54:02.641] data.LB_FadeInType0=100 [2025-09-23 15:54:02.641] data.CHLH_FadeInType0=0 [2025-09-23 15:54:02.641] data.WU_FadeInDelay=0 [2025-09-23 15:54:02.641] max_time_out=0 [2025-09-23 15:54:02.641] No splash screen [2025-09-23 15:54:02.641] stop dss Done [2025-09-23 15:54:02.711] /dev/mem opened. [2025-09-23 15:54:02.711] Memory mapped at address 0xffffb082b000. [2025-09-23 15:54:02.711] Read at address 0x00600018 (0xffffb082b018): 0x00000000 [2025-09-23 15:54:02.711] Write at address 0x00600018 (0xffffb082b018): 0x00400040, readback 0x00400040 [2025-09-23 15:54:02.711] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:54:02.727] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:54:02.887] Loaded PowerVR consumer services. [2025-09-23 15:54:02.983] Waiting data available... [2025-09-23 15:54:02.999] 512+0 records in [2025-09-23 15:54:02.999] 512+0 records out [2025-09-23 15:54:03.047] Starting syslogd/klogd: done [2025-09-23 15:54:03.063] DML Start [2025-09-23 15:54:03.223] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:54:03.446] DML res1: 0 [2025-09-23 15:54:03.900] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:54:03.900] Read Success [2025-09-23 15:54:03.900] Verifying certificate... [2025-09-23 15:54:04.155] Verified OK [2025-09-23 15:54:04.171] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:54:05.861] Verified OK [2025-09-23 15:54:05.861] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:54:06.498] Verified OK [2025-09-23 15:54:06.499] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:54:09.152] fs.protected_hardlinks = 1 [2025-09-23 15:54:09.152] fs.protected_symlinks = 1 [2025-09-23 15:54:09.168] kernel.modules_disabled = 1 [2025-09-23 15:54:09.360] [2025-09-23 15:54:09.360] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:54:10.453] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:54:18.268] SBL1:1210.0.1.0 [2025-09-23 15:54:18.316] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:54:19.883] SBL2:1210.0.1.0 [2025-09-23 15:54:19.930] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:54:20.043] j-A [2025-09-23 15:54:27.412] The R5 Autosar Classic is running [2025-09-23 15:54:27.412] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:54:27.412] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:54:28.019] INIT: version 2.96 booting [2025-09-23 15:54:28.446] INIT: Entering runlevel: 5 [2025-09-23 15:54:28.446] mtd24 attached [2025-09-23 15:54:28.446] mtd28 attached [2025-09-23 15:54:28.446] mtd32 attached [2025-09-23 15:54:28.446] RTNETLINK answers: File exists [2025-09-23 15:54:28.446] ubi0:textures is mounted. [2025-09-23 15:54:28.446] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:54:28.446] ubi2:dml_code is mounted. [2025-09-23 15:54:28.446] ubi1:animations is mounted. [2025-09-23 15:54:28.446] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:54:28.446] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:54:28.446] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:54:28.446] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:54:28.446] data.LB_FadeInType0=100 [2025-09-23 15:54:28.446] data.CHLH_FadeInType0=0 [2025-09-23 15:54:28.446] data.WU_FadeInDelay=0 [2025-09-23 15:54:28.446] max_time_out=0 [2025-09-23 15:54:28.446] No splash screen [2025-09-23 15:54:28.446] stop dss Done [2025-09-23 15:54:28.450] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:54:28.491] /dev/mem opened. [2025-09-23 15:54:28.491] Memory mapped at address 0xffffb9f0d000. [2025-09-23 15:54:28.491] Read at address 0x00600018 (0xffffb9f0d018): 0x00000000 [2025-09-23 15:54:28.491] Write at address 0x00600018 (0xffffb9f0d018): 0x00400040, readback 0x00400040 [2025-09-23 15:54:28.491] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:54:28.714] Loaded PowerVR consumer services. [2025-09-23 15:54:28.730] Waiting data available... [2025-09-23 15:54:28.762] 512+0 records in [2025-09-23 15:54:28.762] 512+0 records out [2025-09-23 15:54:28.778] Starting syslogd/klogd: done [2025-09-23 15:54:28.810] DML Start [2025-09-23 15:54:28.954] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:54:29.210] DML res1: 0 [2025-09-23 15:54:29.642] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:54:29.642] Read Success [2025-09-23 15:54:29.658] Verifying certificate... [2025-09-23 15:54:29.882] Verified OK [2025-09-23 15:54:29.977] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:54:31.702] Verified OK [2025-09-23 15:54:31.702] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:54:32.256] Verified OK [2025-09-23 15:54:32.256] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:54:34.797] fs.protected_hardlinks = 1 [2025-09-23 15:54:34.825] fs.protected_symlinks = 1 [2025-09-23 15:54:34.825] kernel.modules_disabled = 1 [2025-09-23 15:54:35.001] [2025-09-23 15:54:35.001] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:54:36.294] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:54:44.053] SBL1:1210.0.1.0 [2025-09-23 15:54:44.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:54:45.667] SBL2:1210.0.1.0 [2025-09-23 15:54:45.715] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:54:45.812] j-A [2025-09-23 15:54:53.165] The R5 Autosar Classic is running [2025-09-23 15:54:53.187] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:54:53.187] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:54:53.796] INIT: version 2.96 booting [2025-09-23 15:54:54.195] INIT: Entering runlevel: 5 [2025-09-23 15:54:54.195] mtd24 attached [2025-09-23 15:54:54.195] mtd32 attached [2025-09-23 15:54:54.195] mtd28 attached [2025-09-23 15:54:54.195] ubi1:dml_code is mounted. [2025-09-23 15:54:54.195] RTNETLINK answers: File exists [2025-09-23 15:54:54.195] ubi0:textures is mounted. [2025-09-23 15:54:54.195] ubi2:animations is mounted. [2025-09-23 15:54:54.195] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:54:54.195] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:54:54.201] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:54:54.201] data.LB_FadeInType0=100 [2025-09-23 15:54:54.201] data.CHLH_FadeInType0=0 [2025-09-23 15:54:54.201] data.WU_FadeInDelay=0 [2025-09-23 15:54:54.201] max_time_out=0 [2025-09-23 15:54:54.201] No splash screen [2025-09-23 15:54:54.201] stop dss Done [2025-09-23 15:54:54.201] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:54:54.201] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:54:54.273] /dev/mem opened. [2025-09-23 15:54:54.273] Memory mapped at address 0xffff94d52000. [2025-09-23 15:54:54.273] Read at address 0x00600018 (0xffff94d52018): 0x00000000 [2025-09-23 15:54:54.273] Write at address 0x00600018 (0xffff94d52018): 0x00400040, readback 0x00400040 [2025-09-23 15:54:54.288] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:54:54.304] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:54:54.401] Loaded PowerVR consumer services. [2025-09-23 15:54:54.545] Waiting data available... [2025-09-23 15:54:54.561] 512+0 records in [2025-09-23 15:54:54.561] 512+0 records out [2025-09-23 15:54:54.593] Starting syslogd/klogd: done [2025-09-23 15:54:54.609] DML Start [2025-09-23 15:54:54.784] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:54:55.008] DML res1: 0 [2025-09-23 15:54:55.477] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:54:55.477] Read Success [2025-09-23 15:54:55.477] Verifying certificate... [2025-09-23 15:54:55.748] Verified OK [2025-09-23 15:54:55.749] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:54:57.540] Verified OK [2025-09-23 15:54:57.555] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:54:58.099] Verified OK [2025-09-23 15:54:58.115] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:55:00.561] fs.protected_hardlinks = 1 [2025-09-23 15:55:00.576] fs.protected_symlinks = 1 [2025-09-23 15:55:00.576] kernel.modules_disabled = 1 [2025-09-23 15:55:00.784] [2025-09-23 15:55:00.784] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:55:02.022] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:55:09.803] SBL1:1210.0.1.0 [2025-09-23 15:55:09.851] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:55:11.418] SBL2:1210.0.1.0 [2025-09-23 15:55:11.466] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:55:11.578] j-A [2025-09-23 15:55:18.915] The R5 Autosar Classic is running [2025-09-23 15:55:18.946] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:55:18.946] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:55:19.554] INIT: version 2.96 booting [2025-09-23 15:55:19.666] INIT: Entering runlevel: 5 [2025-09-23 15:55:19.810] mtd28 attached [2025-09-23 15:55:19.826] mtd32 attached [2025-09-23 15:55:19.842] mtd24 attached [2025-09-23 15:55:19.842] ubi0:animations is mounted. [2025-09-23 15:55:19.889] RTNETLINK answers: File exists [2025-09-23 15:55:19.946] ubi2:textures is mounted. [2025-09-23 15:55:19.946] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:55:19.946] ubi1:dml_code is mounted. [2025-09-23 15:55:19.946] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:55:19.946] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:55:19.946] data.LB_FadeInType0=100 [2025-09-23 15:55:19.946] data.CHLH_FadeInType0=0 [2025-09-23 15:55:19.946] data.WU_FadeInDelay=0 [2025-09-23 15:55:19.946] max_time_out=0 [2025-09-23 15:55:19.946] No splash screen [2025-09-23 15:55:19.946] stop dss Done [2025-09-23 15:55:19.946] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:55:19.946] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:55:20.013] /dev/mem opened. [2025-09-23 15:55:20.013] Memory mapped at address 0xffff832bc000. [2025-09-23 15:55:20.013] Read at address 0x00600018 (0xffff832bc018): 0x00000000 [2025-09-23 15:55:20.013] Write at address 0x00600018 (0xffff832bc018): 0x00400040, readback 0x00400040 [2025-09-23 15:55:20.013] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:55:20.029] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:55:20.237] Loaded PowerVR consumer services. [2025-09-23 15:55:20.317] Waiting data available... [2025-09-23 15:55:20.348] 512+0 records in [2025-09-23 15:55:20.348] 512+0 records out [2025-09-23 15:55:20.364] Starting syslogd/klogd: done [2025-09-23 15:55:20.380] DML Start [2025-09-23 15:55:20.605] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:55:20.813] DML res1: 0 [2025-09-23 15:55:21.180] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:55:21.180] Read Success [2025-09-23 15:55:21.180] Verifying certificate... [2025-09-23 15:55:21.403] Verified OK [2025-09-23 15:55:21.434] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:55:23.168] Verified OK [2025-09-23 15:55:23.168] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:55:23.775] Verified OK [2025-09-23 15:55:23.775] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:55:26.333] fs.protected_hardlinks = 1 [2025-09-23 15:55:26.333] fs.protected_symlinks = 1 [2025-09-23 15:55:26.349] kernel.modules_disabled = 1 [2025-09-23 15:55:26.540] [2025-09-23 15:55:26.540] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:55:27.927] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:55:35.653] SBL1:1210.0.1.0 [2025-09-23 15:55:35.701] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:55:37.268] SBL2:1210.0.1.0 [2025-09-23 15:55:37.316] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:55:37.427] j-A [2025-09-23 15:55:44.797] The R5 Autosar Classic is running [2025-09-23 15:55:44.797] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:55:44.797] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:55:45.404] INIT: version 2.96 booting [2025-09-23 15:55:45.516] INIT: Entering runlevel: 5 [2025-09-23 15:55:45.660] mtd24 attached [2025-09-23 15:55:45.676] mtd32 attached [2025-09-23 15:55:45.692] mtd28 attached [2025-09-23 15:55:45.846] ubi0:textures is mounted. [2025-09-23 15:55:45.846] RTNETLINK answers: File exists [2025-09-23 15:55:45.846] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:55:45.846] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:55:45.846] ubi2:animations is mounted. [2025-09-23 15:55:45.846] ubi1:dml_code is mounted. [2025-09-23 15:55:45.846] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:55:45.846] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:55:45.846] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:55:45.846] data.LB_FadeInType0=100 [2025-09-23 15:55:45.846] data.CHLH_FadeInType0=0 [2025-09-23 15:55:45.846] data.WU_FadeInDelay=0 [2025-09-23 15:55:45.846] max_time_out=0 [2025-09-23 15:55:45.846] No splash screen [2025-09-23 15:55:45.846] stop dss Done [2025-09-23 15:55:45.847] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:55:45.874] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:55:45.874] /dev/mem opened. [2025-09-23 15:55:45.874] Memory mapped at address 0xffff865cc000. [2025-09-23 15:55:45.874] Read at address 0x00600018 (0xffff865cc018): 0x00000000 [2025-09-23 15:55:45.874] Write at address 0x00600018 (0xffff865cc018): 0x00400040, readback 0x00400040 [2025-09-23 15:55:46.050] Loaded PowerVR consumer services. [2025-09-23 15:55:46.146] Waiting data available... [2025-09-23 15:55:46.146] 512+0 records in [2025-09-23 15:55:46.146] 512+0 records out [2025-09-23 15:55:46.177] Starting syslogd/klogd: done [2025-09-23 15:55:46.193] DML Start [2025-09-23 15:55:46.354] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:55:46.853] DML res1: 0 [2025-09-23 15:55:47.072] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:55:47.072] Read Success [2025-09-23 15:55:47.072] Verifying certificate... [2025-09-23 15:55:47.296] Verified OK [2025-09-23 15:55:47.312] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:55:49.064] Verified OK [2025-09-23 15:55:49.064] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:55:49.525] Verified OK [2025-09-23 15:55:49.525] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:55:51.876] fs.protected_hardlinks = 1 [2025-09-23 15:55:51.876] fs.protected_symlinks = 1 [2025-09-23 15:55:51.892] kernel.modules_disabled = 1 [2025-09-23 15:55:52.068] [2025-09-23 15:55:52.068] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:55:53.709] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:56:01.434] SBL1:1210.0.1.0 [2025-09-23 15:56:01.466] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:56:03.049] SBL2:1210.0.1.0 [2025-09-23 15:56:03.097] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:56:03.193] j-A [2025-09-23 15:56:10.567] The R5 Autosar Classic is running [2025-09-23 15:56:10.567] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:56:10.569] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:56:11.176] INIT: version 2.96 booting [2025-09-23 15:56:11.288] INIT: Entering runlevel: 5 [2025-09-23 15:56:11.432] mtd24 attached [2025-09-23 15:56:11.573] mtd28 attached [2025-09-23 15:56:11.574] mtd32 attached [2025-09-23 15:56:11.574] ubi0:textures is mounted. [2025-09-23 15:56:11.574] RTNETLINK answers: File exists [2025-09-23 15:56:11.574] ubi1:animations is mounted. [2025-09-23 15:56:11.574] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:56:11.574] ubi2:dml_code is mounted. [2025-09-23 15:56:11.574] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:56:11.574] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:56:11.574] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:56:11.574] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:56:11.574] data.LB_FadeInType0=100 [2025-09-23 15:56:11.574] data.CHLH_FadeInType0=0 [2025-09-23 15:56:11.574] data.WU_FadeInDelay=0 [2025-09-23 15:56:11.574] max_time_out=0 [2025-09-23 15:56:11.574] No splash screen [2025-09-23 15:56:11.574] stop dss Done [2025-09-23 15:56:11.647] /dev/mem opened. [2025-09-23 15:56:11.647] Memory mapped at address 0xffffbdb01000. [2025-09-23 15:56:11.647] Read at address 0x00600018 (0xffffbdb01018): 0x00000000 [2025-09-23 15:56:11.647] Write at address 0x00600018 (0xffffbdb01018): 0x00400040, readback 0x00400040 [2025-09-23 15:56:11.647] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:56:11.647] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:56:11.902] Waiting data available... [2025-09-23 15:56:11.902] Loaded PowerVR consumer services. [2025-09-23 15:56:11.934] 512+0 records in [2025-09-23 15:56:11.934] 512+0 records out [2025-09-23 15:56:11.982] Starting syslogd/klogd: done [2025-09-23 15:56:11.998] DML Start [2025-09-23 15:56:12.174] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:56:12.588] DML res1: 0 [2025-09-23 15:56:12.829] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:56:12.850] Read Success [2025-09-23 15:56:12.850] Verifying certificate... [2025-09-23 15:56:13.074] Verified OK [2025-09-23 15:56:13.090] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:56:14.985] Verified OK [2025-09-23 15:56:14.985] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:56:15.555] Verified OK [2025-09-23 15:56:15.555] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:56:18.080] fs.protected_hardlinks = 1 [2025-09-23 15:56:18.080] fs.protected_symlinks = 1 [2025-09-23 15:56:18.080] kernel.modules_disabled = 1 [2025-09-23 15:56:18.272] [2025-09-23 15:56:18.272] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:56:19.432] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:56:27.228] SBL1:1210.0.1.0 [2025-09-23 15:56:27.276] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:56:28.842] SBL2:1210.0.1.0 [2025-09-23 15:56:28.890] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:56:28.987] j-A [2025-09-23 15:56:36.341] The R5 Autosar Classic is running [2025-09-23 15:56:36.363] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:56:36.363] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:56:36.971] INIT: version 2.96 booting [2025-09-23 15:56:37.377] INIT: Entering runlevel: 5 [2025-09-23 15:56:37.377] mtd28 attached [2025-09-23 15:56:37.377] mtd24 attached [2025-09-23 15:56:37.377] mtd32 attached [2025-09-23 15:56:37.377] ubi0:animations is mounted. [2025-09-23 15:56:37.377] ubi1:textures is mounted. [2025-09-23 15:56:37.377] RTNETLINK answers: File exists [2025-09-23 15:56:37.377] ubi2:dml_code is mounted. [2025-09-23 15:56:37.392] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:56:37.392] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:56:37.392] data.LB_FadeInType0=100 [2025-09-23 15:56:37.392] data.CHLH_FadeInType0=0 [2025-09-23 15:56:37.392] data.WU_FadeInDelay=0 [2025-09-23 15:56:37.392] max_time_out=0 [2025-09-23 15:56:37.392] No splash screen [2025-09-23 15:56:37.392] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:56:37.392] stop dss Done [2025-09-23 15:56:37.392] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:56:37.392] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:56:37.444] /dev/mem opened. [2025-09-23 15:56:37.444] Memory mapped at address 0xffff9f380000. [2025-09-23 15:56:37.444] Read at address 0x00600018 (0xffff9f380018): 0x00000000 [2025-09-23 15:56:37.444] Write at address 0x00600018 (0xffff9f380018): 0x00400040, readback 0x00400040 [2025-09-23 15:56:37.460] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:56:37.476] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:56:37.620] Loaded PowerVR consumer services. [2025-09-23 15:56:37.716] Waiting data available... [2025-09-23 15:56:37.716] 512+0 records in [2025-09-23 15:56:37.733] 512+0 records out [2025-09-23 15:56:37.764] Starting syslogd/klogd: done [2025-09-23 15:56:37.780] DML Start [2025-09-23 15:56:37.940] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:56:38.228] DML res1: 0 [2025-09-23 15:56:38.563] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:56:38.563] Read Success [2025-09-23 15:56:38.579] Verifying certificate... [2025-09-23 15:56:38.803] Verified OK [2025-09-23 15:56:38.819] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:56:40.514] Verified OK [2025-09-23 15:56:40.514] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:56:41.147] Verified OK [2025-09-23 15:56:41.147] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:56:43.673] fs.protected_hardlinks = 1 [2025-09-23 15:56:43.689] fs.protected_symlinks = 1 [2025-09-23 15:56:43.689] kernel.modules_disabled = 1 [2025-09-23 15:56:43.880] [2025-09-23 15:56:43.880] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:56:45.291] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:56:53.022] SBL1:1210.0.1.0 [2025-09-23 15:56:53.053] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:56:54.636] SBL2:1210.0.1.0 [2025-09-23 15:56:54.669] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:56:54.780] j-A [2025-09-23 15:57:02.153] The R5 Autosar Classic is running [2025-09-23 15:57:02.153] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:57:02.153] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:57:02.761] INIT: version 2.96 booting [2025-09-23 15:57:02.873] INIT: Entering runlevel: 5 [2025-09-23 15:57:03.215] mtd28 attached [2025-09-23 15:57:03.215] mtd24 attached [2025-09-23 15:57:03.215] mtd32 attached [2025-09-23 15:57:03.215] ubi0:animations is mounted. [2025-09-23 15:57:03.215] RTNETLINK answers: File exists [2025-09-23 15:57:03.215] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:57:03.215] ubi1:textures is mounted. [2025-09-23 15:57:03.215] ubi2:dml_code is mounted. [2025-09-23 15:57:03.215] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:57:03.215] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:57:03.215] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:57:03.215] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:57:03.215] data.LB_FadeInType0=100 [2025-09-23 15:57:03.215] data.CHLH_FadeInType0=0 [2025-09-23 15:57:03.215] data.WU_FadeInDelay=0 [2025-09-23 15:57:03.215] max_time_out=0 [2025-09-23 15:57:03.215] No splash screen [2025-09-23 15:57:03.215] stop dss Done [2025-09-23 15:57:03.215] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:57:03.215] /dev/mem opened. [2025-09-23 15:57:03.240] Memory mapped at address 0xffffa2f09000. [2025-09-23 15:57:03.240] Read at address 0x00600018 (0xffffa2f09018): 0x00000000 [2025-09-23 15:57:03.240] Write at address 0x00600018 (0xffffa2f09018): 0x00400040, readback 0x00400040 [2025-09-23 15:57:03.240] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:57:03.432] Loaded PowerVR consumer services. [2025-09-23 15:57:03.512] Waiting data available... [2025-09-23 15:57:03.545] 512+0 records in [2025-09-23 15:57:03.545] 512+0 records out [2025-09-23 15:57:03.592] Starting syslogd/klogd: done [2025-09-23 15:57:03.592] DML Start [2025-09-23 15:57:03.784] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:57:04.024] DML res1: 0 [2025-09-23 15:57:04.387] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:57:04.387] Read Success [2025-09-23 15:57:04.387] Verifying certificate... [2025-09-23 15:57:04.610] Verified OK [2025-09-23 15:57:04.626] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:57:06.377] Verified OK [2025-09-23 15:57:06.377] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:57:06.920] Verified OK [2025-09-23 15:57:06.937] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:57:09.478] fs.protected_hardlinks = 1 [2025-09-23 15:57:09.478] fs.protected_symlinks = 1 [2025-09-23 15:57:09.494] kernel.modules_disabled = 1 [2025-09-23 15:57:09.718] [2025-09-23 15:57:09.718] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:57:11.108] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:57:18.816] SBL1:1210.0.1.0 [2025-09-23 15:57:18.864] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:57:20.430] SBL2:1210.0.1.0 [2025-09-23 15:57:20.478] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:57:20.590] j-A [2025-09-23 15:57:27.960] The R5 Autosar Classic is running [2025-09-23 15:57:27.960] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:57:27.960] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:57:28.567] INIT: version 2.96 booting [2025-09-23 15:57:28.678] INIT: Entering runlevel: 5 [2025-09-23 15:57:28.839] mtd32 attached [2025-09-23 15:57:28.854] mtd24 attached [2025-09-23 15:57:28.870] mtd28 attached [2025-09-23 15:57:29.009] ubi0:dml_code is mounted. [2025-09-23 15:57:29.010] RTNETLINK answers: File exists [2025-09-23 15:57:29.010] ubi1:textures is mounted. [2025-09-23 15:57:29.010] ubi2:animations is mounted. [2025-09-23 15:57:29.010] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:57:29.010] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:57:29.010] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:57:29.010] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:57:29.010] data.LB_FadeInType0=100 [2025-09-23 15:57:29.010] data.CHLH_FadeInType0=0 [2025-09-23 15:57:29.010] data.WU_FadeInDelay=0 [2025-09-23 15:57:29.010] max_time_out=0 [2025-09-23 15:57:29.010] No splash screen [2025-09-23 15:57:29.010] stop dss Done [2025-09-23 15:57:29.010] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:57:29.010] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:57:29.044] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:57:29.044] /dev/mem opened. [2025-09-23 15:57:29.044] Memory mapped at address 0xffff96137000. [2025-09-23 15:57:29.044] Read at address 0x00600018 (0xffff96137018): 0x00000000 [2025-09-23 15:57:29.044] Write at address 0x00600018 (0xffff96137018): 0x00400040, readback 0x00400040 [2025-09-23 15:57:29.328] Loaded PowerVR consumer services. [2025-09-23 15:57:29.328] Waiting data available... [2025-09-23 15:57:29.360] 512+0 records in [2025-09-23 15:57:29.360] 512+0 records out [2025-09-23 15:57:29.376] Starting syslogd/klogd: done [2025-09-23 15:57:29.392] DML Start [2025-09-23 15:57:29.584] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:57:29.808] DML res1: 0 [2025-09-23 15:57:30.224] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:57:30.240] Read Success [2025-09-23 15:57:30.240] Verifying certificate... [2025-09-23 15:57:30.495] Verified OK [2025-09-23 15:57:30.511] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:57:32.153] Verified OK [2025-09-23 15:57:32.153] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:57:32.826] Verified OK [2025-09-23 15:57:32.826] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:57:35.478] fs.protected_hardlinks = 1 [2025-09-23 15:57:35.494] fs.protected_symlinks = 1 [2025-09-23 15:57:35.494] kernel.modules_disabled = 1 [2025-09-23 15:57:35.686] [2025-09-23 15:57:35.686] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:57:36.819] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:57:44.609] SBL1:1210.0.1.0 [2025-09-23 15:57:44.641] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:57:46.223] SBL2:1210.0.1.0 [2025-09-23 15:57:46.262] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:57:46.368] j-A [2025-09-23 15:57:53.742] The R5 Autosar Classic is running [2025-09-23 15:57:53.742] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:57:53.742] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:57:54.351] INIT: version 2.96 booting [2025-09-23 15:57:54.462] INIT: Entering runlevel: 5 [2025-09-23 15:57:54.779] mtd24 attached [2025-09-23 15:57:54.779] mtd28 attached [2025-09-23 15:57:54.779] mtd32 attached [2025-09-23 15:57:54.779] ubi0:textures is mounted. [2025-09-23 15:57:54.779] RTNETLINK answers: File exists [2025-09-23 15:57:54.779] ubi1:animations is mounted. [2025-09-23 15:57:54.779] ubi2:dml_code is mounted. [2025-09-23 15:57:54.779] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:57:54.779] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:57:54.779] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:57:54.779] data.LB_FadeInType0=100 [2025-09-23 15:57:54.779] data.CHLH_FadeInType0=0 [2025-09-23 15:57:54.779] data.WU_FadeInDelay=0 [2025-09-23 15:57:54.779] max_time_out=0 [2025-09-23 15:57:54.779] No splash screen [2025-09-23 15:57:54.779] stop dss Done [2025-09-23 15:57:54.779] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:57:54.779] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:57:54.829] /dev/mem opened. [2025-09-23 15:57:54.829] Memory mapped at address 0xffffa972d000. [2025-09-23 15:57:54.829] Read at address 0x00600018 (0xffffa972d018): 0x00000000 [2025-09-23 15:57:54.829] Write at address 0x00600018 (0xffffa972d018): 0x00400040, readback 0x00400040 [2025-09-23 15:57:54.859] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:57:54.859] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:57:55.019] Loaded PowerVR consumer services. [2025-09-23 15:57:55.067] Waiting data available... [2025-09-23 15:57:55.099] 512+0 records in [2025-09-23 15:57:55.099] 512+0 records out [2025-09-23 15:57:55.147] Starting syslogd/klogd: done [2025-09-23 15:57:55.163] DML Start [2025-09-23 15:57:55.339] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:57:55.563] DML res1: 0 [2025-09-23 15:57:55.974] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:57:55.974] Read Success [2025-09-23 15:57:55.974] Verifying certificate... [2025-09-23 15:57:56.213] Verified OK [2025-09-23 15:57:56.229] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:57:58.029] Verified OK [2025-09-23 15:57:58.029] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:57:58.617] Verified OK [2025-09-23 15:57:58.617] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:58:01.174] fs.protected_hardlinks = 1 [2025-09-23 15:58:01.174] fs.protected_symlinks = 1 [2025-09-23 15:58:01.191] kernel.modules_disabled = 1 [2025-09-23 15:58:01.383] [2025-09-23 15:58:01.383] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:58:02.634] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:58:10.364] SBL1:1210.0.1.0 [2025-09-23 15:58:10.412] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:58:11.979] SBL2:1210.0.1.0 [2025-09-23 15:58:12.027] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 15:58:12.123] j-A [2025-09-23 15:58:19.477] The R5 Autosar Classic is running [2025-09-23 15:58:19.502] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:58:19.502] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:58:20.110] INIT: version 2.96 booting [2025-09-23 15:58:20.528] INIT: Entering runlevel: 5 [2025-09-23 15:58:20.528] mtd24 attached [2025-09-23 15:58:20.528] mtd32 attached [2025-09-23 15:58:20.528] mtd28 attached [2025-09-23 15:58:20.528] RTNETLINK answers: File exists [2025-09-23 15:58:20.528] ubi0:textures is mounted. [2025-09-23 15:58:20.528] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:58:20.528] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:58:20.528] ubi1:dml_code is mounted. [2025-09-23 15:58:20.528] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:58:20.528] ubi2:animations is mounted. [2025-09-23 15:58:20.528] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:58:20.528] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:58:20.528] data.LB_FadeInType0=100 [2025-09-23 15:58:20.528] data.CHLH_FadeInType0=0 [2025-09-23 15:58:20.528] data.WU_FadeInDelay=0 [2025-09-23 15:58:20.528] max_time_out=0 [2025-09-23 15:58:20.528] No splash screen [2025-09-23 15:58:20.528] stop dss Done [2025-09-23 15:58:20.560] /dev/mem opened. [2025-09-23 15:58:20.598] Memory mapped at address 0xffffb4fce000. [2025-09-23 15:58:20.598] Read at address 0x00600018 (0xffffb4fce018): 0x00000000 [2025-09-23 15:58:20.598] Write at address 0x00600018 (0xffffb4fce018): 0x00400040, readback 0x00400040 [2025-09-23 15:58:20.598] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:58:20.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:58:20.677] Loaded PowerVR consumer services. [2025-09-23 15:58:20.837] Waiting data available... [2025-09-23 15:58:20.853] 512+0 records in [2025-09-23 15:58:20.853] 512+0 records out [2025-09-23 15:58:20.869] Starting syslogd/klogd: done [2025-09-23 15:58:20.885] DML Start [2025-09-23 15:58:21.077] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:58:21.333] DML res1: 0 [2025-09-23 15:58:21.709] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:58:21.709] Read Success [2025-09-23 15:58:21.709] Verifying certificate... [2025-09-23 15:58:21.932] Verified OK [2025-09-23 15:58:21.949] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:58:23.687] Verified OK [2025-09-23 15:58:23.687] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:58:24.324] Verified OK [2025-09-23 15:58:24.324] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:58:26.961] fs.protected_hardlinks = 1 [2025-09-23 15:58:26.961] fs.protected_symlinks = 1 [2025-09-23 15:58:26.977] kernel.modules_disabled = 1 [2025-09-23 15:58:27.152] [2025-09-23 15:58:27.152] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:58:28.385] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:58:36.151] SBL1:1210.0.1.0 [2025-09-23 15:58:36.183] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:58:37.765] SBL2:1210.0.1.0 [2025-09-23 15:58:37.797] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 15:58:37.909] j-A [2025-09-23 15:58:45.280] The R5 Autosar Classic is running [2025-09-23 15:58:45.280] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:58:45.280] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:58:45.887] INIT: version 2.96 booting [2025-09-23 15:58:46.000] INIT: Entering runlevel: 5 [2025-09-23 15:58:46.342] mtd24 attached [2025-09-23 15:58:46.342] mtd28 attached [2025-09-23 15:58:46.342] mtd32 attached [2025-09-23 15:58:46.342] RTNETLINK answers: File exists [2025-09-23 15:58:46.342] ubi0:textures is mounted. [2025-09-23 15:58:46.342] ubi2:dml_code is mounted. [2025-09-23 15:58:46.342] ubi1:animations is mounted. [2025-09-23 15:58:46.342] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:58:46.342] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:58:46.342] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:58:46.342] data.LB_FadeInType0=100 [2025-09-23 15:58:46.342] data.CHLH_FadeInType0=0 [2025-09-23 15:58:46.342] data.WU_FadeInDelay=0 [2025-09-23 15:58:46.342] max_time_out=0 [2025-09-23 15:58:46.342] No splash screen [2025-09-23 15:58:46.342] stop dss Done [2025-09-23 15:58:46.342] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:58:46.342] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:58:46.342] /dev/mem opened. [2025-09-23 15:58:46.346] Memory mapped at address 0xffff8e888000. [2025-09-23 15:58:46.346] Read at address 0x00600018 (0xffff8e888018): 0x00000000 [2025-09-23 15:58:46.346] Write at address 0x00600018 (0xffff8e888018): 0x00400040, readback 0x00400040 [2025-09-23 15:58:46.393] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:58:46.409] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:58:46.617] Loaded PowerVR consumer services. [2025-09-23 15:58:46.633] Waiting data available... [2025-09-23 15:58:46.649] 512+0 records in [2025-09-23 15:58:46.649] 512+0 records out [2025-09-23 15:58:46.680] Starting syslogd/klogd: done [2025-09-23 15:58:46.696] DML Start [2025-09-23 15:58:46.841] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:58:47.048] DML res1: 0 [2025-09-23 15:58:47.550] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:58:47.550] Read Success [2025-09-23 15:58:47.550] Verifying certificate... [2025-09-23 15:58:47.872] Verified OK [2025-09-23 15:58:47.872] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:58:49.325] Verified OK [2025-09-23 15:58:49.347] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:58:49.938] Verified OK [2025-09-23 15:58:49.938] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:58:52.563] fs.protected_hardlinks = 1 [2025-09-23 15:58:52.563] fs.protected_symlinks = 1 [2025-09-23 15:58:52.563] kernel.modules_disabled = 1 [2025-09-23 15:58:52.752] [2025-09-23 15:58:52.752] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:58:54.143] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:59:01.998] SBL1:1210.0.1.0 [2025-09-23 15:59:01.999] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:59:03.513] SBL2:1210.0.1.0 [2025-09-23 15:59:03.545] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:59:03.657] j-A [2025-09-23 15:59:11.029] The R5 Autosar Classic is running [2025-09-23 15:59:11.029] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:59:11.031] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:59:11.639] INIT: version 2.96 booting [2025-09-23 15:59:11.750] INIT: Entering runlevel: 5 [2025-09-23 15:59:11.895] mtd24 attached [2025-09-23 15:59:12.028] mtd28 attached [2025-09-23 15:59:12.028] mtd32 attached [2025-09-23 15:59:12.028] RTNETLINK answers: File exists [2025-09-23 15:59:12.028] ubi0:textures is mounted. [2025-09-23 15:59:12.028] ubi1:animations is mounted. [2025-09-23 15:59:12.028] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:59:12.028] ubi2:dml_code is mounted. [2025-09-23 15:59:12.028] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:59:12.028] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:59:12.028] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:59:12.028] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:59:12.034] data.LB_FadeInType0=100 [2025-09-23 15:59:12.034] data.CHLH_FadeInType0=0 [2025-09-23 15:59:12.034] data.WU_FadeInDelay=0 [2025-09-23 15:59:12.034] max_time_out=0 [2025-09-23 15:59:12.034] No splash screen [2025-09-23 15:59:12.034] stop dss Done [2025-09-23 15:59:12.127] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:59:12.127] /dev/mem opened. [2025-09-23 15:59:12.127] Memory mapped at address 0xffff84bea000. [2025-09-23 15:59:12.127] Read at address 0x00600018 (0xffff84bea018): 0x00000000 [2025-09-23 15:59:12.127] Write at address 0x00600018 (0xffff84bea018): 0x00400040, readback 0x00400040 [2025-09-23 15:59:12.127] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:59:12.175] Loaded PowerVR consumer services. [2025-09-23 15:59:12.383] Waiting data available... [2025-09-23 15:59:12.383] 512+0 records in [2025-09-23 15:59:12.399] 512+0 records out [2025-09-23 15:59:12.447] Starting syslogd/klogd: done [2025-09-23 15:59:12.463] DML Start [2025-09-23 15:59:12.638] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:59:12.863] DML res1: 0 [2025-09-23 15:59:13.334] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:59:13.334] Read Success [2025-09-23 15:59:13.334] Verifying certificate... [2025-09-23 15:59:13.574] Verified OK [2025-09-23 15:59:13.590] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:59:15.316] Verified OK [2025-09-23 15:59:15.316] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:59:15.981] Verified OK [2025-09-23 15:59:15.981] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:59:18.542] fs.protected_hardlinks = 1 [2025-09-23 15:59:18.542] fs.protected_symlinks = 1 [2025-09-23 15:59:18.543] kernel.modules_disabled = 1 [2025-09-23 15:59:18.716] [2025-09-23 15:59:18.716] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:59:19.944] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:59:27.849] SBL1:1210.0.1.0 [2025-09-23 15:59:27.897] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:59:29.464] SBL2:1210.0.1.0 [2025-09-23 15:59:29.514] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:59:29.608] j-A [2025-09-23 15:59:36.961] The R5 Autosar Classic is running [2025-09-23 15:59:36.985] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 15:59:36.985] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 15:59:37.592] INIT: version 2.96 booting [2025-09-23 15:59:37.704] INIT: Entering runlevel: 5 [2025-09-23 15:59:37.864] mtd32 attached [2025-09-23 15:59:37.880] mtd28 attached [2025-09-23 15:59:37.880] mtd24 attached [2025-09-23 15:59:37.928] RTNETLINK answers: File exists [2025-09-23 15:59:38.003] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 15:59:38.003] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 15:59:38.003] ubi2:textures is mounted. [2025-09-23 15:59:38.003] ubi0:dml_code is mounted. [2025-09-23 15:59:38.003] ubi1:animations is mounted. [2025-09-23 15:59:38.003] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 15:59:38.003] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 15:59:38.003] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 15:59:38.003] data.LB_FadeInType0=100 [2025-09-23 15:59:38.003] data.CHLH_FadeInType0=0 [2025-09-23 15:59:38.003] data.WU_FadeInDelay=0 [2025-09-23 15:59:38.003] max_time_out=0 [2025-09-23 15:59:38.003] No splash screen [2025-09-23 15:59:38.003] stop dss Done [2025-09-23 15:59:38.030] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 15:59:38.069] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 15:59:38.069] /dev/mem opened. [2025-09-23 15:59:38.069] Memory mapped at address 0xffff85b70000. [2025-09-23 15:59:38.069] Read at address 0x00600018 (0xffff85b70018): 0x00000000 [2025-09-23 15:59:38.069] Write at address 0x00600018 (0xffff85b70018): 0x00400040, readback 0x00400040 [2025-09-23 15:59:38.165] Loaded PowerVR consumer services. [2025-09-23 15:59:38.341] Waiting data available... [2025-09-23 15:59:38.373] 512+0 records in [2025-09-23 15:59:38.373] 512+0 records out [2025-09-23 15:59:38.420] Starting syslogd/klogd: done [2025-09-23 15:59:38.436] DML Start [2025-09-23 15:59:38.644] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 15:59:39.012] DML res1: 0 [2025-09-23 15:59:39.252] Read DML Algo certificate (mtd31) and save to file [2025-09-23 15:59:39.268] Read Success [2025-09-23 15:59:39.268] Verifying certificate... [2025-09-23 15:59:39.491] Verified OK [2025-09-23 15:59:39.507] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 15:59:41.313] Verified OK [2025-09-23 15:59:41.313] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 15:59:41.840] Verified OK [2025-09-23 15:59:41.840] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 15:59:44.301] fs.protected_hardlinks = 1 [2025-09-23 15:59:44.328] fs.protected_symlinks = 1 [2025-09-23 15:59:44.328] kernel.modules_disabled = 1 [2025-09-23 15:59:44.520] [2025-09-23 15:59:44.520] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 15:59:45.938] RTNETLINK answers: Cannot assign requested address [2025-09-23 15:59:53.607] SBL1:1210.0.1.0 [2025-09-23 15:59:53.654] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:59:55.221] SBL2:1210.0.1.0 [2025-09-23 15:59:55.269] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 15:59:55.365] j-A [2025-09-23 16:00:02.718] The R5 Autosar Classic is running [2025-09-23 16:00:02.741] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:00:02.741] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:00:03.349] INIT: version 2.96 booting [2025-09-23 16:00:03.460] INIT: Entering runlevel: 5 [2025-09-23 16:00:03.621] mtd32 attached [2025-09-23 16:00:03.637] mtd28 attached [2025-09-23 16:00:03.637] mtd24 attached [2025-09-23 16:00:03.684] RTNETLINK answers: File exists [2025-09-23 16:00:03.790] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:00:03.790] ubi0:dml_code is mounted. [2025-09-23 16:00:03.790] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:00:03.790] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:00:03.790] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:00:03.790] ubi2:textures is mounted. [2025-09-23 16:00:03.790] ubi1:animations is mounted. [2025-09-23 16:00:03.790] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:00:03.791] data.LB_FadeInType0=100 [2025-09-23 16:00:03.791] data.CHLH_FadeInType0=0 [2025-09-23 16:00:03.791] data.WU_FadeInDelay=0 [2025-09-23 16:00:03.791] max_time_out=0 [2025-09-23 16:00:03.791] No splash screen [2025-09-23 16:00:03.791] stop dss Done [2025-09-23 16:00:03.791] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:00:03.791] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:00:03.825] /dev/mem opened. [2025-09-23 16:00:03.825] Memory mapped at address 0xffffa2d2d000. [2025-09-23 16:00:03.825] Read at address 0x00600018 (0xffffa2d2d018): 0x00000000 [2025-09-23 16:00:03.825] Write at address 0x00600018 (0xffffa2d2d018): 0x00400040, readback 0x00400040 [2025-09-23 16:00:04.000] Loaded PowerVR consumer services. [2025-09-23 16:00:04.081] Waiting data available... [2025-09-23 16:00:04.097] 512+0 records in [2025-09-23 16:00:04.097] 512+0 records out [2025-09-23 16:00:04.144] Starting syslogd/klogd: done [2025-09-23 16:00:04.160] DML Start [2025-09-23 16:00:04.368] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:00:04.793] DML res1: 0 [2025-09-23 16:00:04.971] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:00:04.971] Read Success [2025-09-23 16:00:04.971] Verifying certificate... [2025-09-23 16:00:05.194] Verified OK [2025-09-23 16:00:05.210] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:00:06.933] Verified OK [2025-09-23 16:00:06.933] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:00:07.570] Verified OK [2025-09-23 16:00:07.570] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:00:10.112] fs.protected_hardlinks = 1 [2025-09-23 16:00:10.128] fs.protected_symlinks = 1 [2025-09-23 16:00:10.144] kernel.modules_disabled = 1 [2025-09-23 16:00:10.319] [2025-09-23 16:00:10.319] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:00:11.694] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:00:19.365] SBL1:1210.0.1.0 [2025-09-23 16:00:19.413] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:00:20.979] SBL2:1210.0.1.0 [2025-09-23 16:00:21.027] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:00:21.138] j-A [2025-09-23 16:00:28.508] The R5 Autosar Classic is running [2025-09-23 16:00:28.508] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:00:28.508] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:00:29.115] INIT: version 2.96 booting [2025-09-23 16:00:29.227] INIT: Entering runlevel: 5 [2025-09-23 16:00:29.560] mtd24 attached [2025-09-23 16:00:29.560] mtd32 attached [2025-09-23 16:00:29.560] mtd28 attached [2025-09-23 16:00:29.560] RTNETLINK answers: File exists [2025-09-23 16:00:29.560] ubi0:textures is mounted. [2025-09-23 16:00:29.560] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:00:29.560] ubi1:dml_code is mounted. [2025-09-23 16:00:29.560] ubi2:animations is mounted. [2025-09-23 16:00:29.560] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:00:29.560] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:00:29.560] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:00:29.560] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:00:29.560] data.LB_FadeInType0=100 [2025-09-23 16:00:29.560] data.CHLH_FadeInType0=0 [2025-09-23 16:00:29.560] data.WU_FadeInDelay=0 [2025-09-23 16:00:29.560] max_time_out=0 [2025-09-23 16:00:29.560] No splash screen [2025-09-23 16:00:29.560] stop dss Done [2025-09-23 16:00:29.560] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:00:29.560] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:00:29.597] /dev/mem opened. [2025-09-23 16:00:29.597] Memory mapped at address 0xffffa1754000. [2025-09-23 16:00:29.597] Read at address 0x00600018 (0xffffa1754018): 0x00000000 [2025-09-23 16:00:29.597] Write at address 0x00600018 (0xffffa1754018): 0x00400040, readback 0x00400040 [2025-09-23 16:00:29.710] Loaded PowerVR consumer services. [2025-09-23 16:00:29.854] Waiting data available... [2025-09-23 16:00:29.870] 512+0 records in [2025-09-23 16:00:29.870] 512+0 records out [2025-09-23 16:00:29.917] Starting syslogd/klogd: done [2025-09-23 16:00:29.933] DML Start [2025-09-23 16:00:30.126] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:00:30.349] DML res1: 0 [2025-09-23 16:00:30.812] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:00:30.812] Read Success [2025-09-23 16:00:30.812] Verifying certificate... [2025-09-23 16:00:31.036] Verified OK [2025-09-23 16:00:31.052] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:00:32.730] Verified OK [2025-09-23 16:00:32.730] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:00:33.353] Verified OK [2025-09-23 16:00:33.353] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:00:36.071] fs.protected_hardlinks = 1 [2025-09-23 16:00:36.071] fs.protected_symlinks = 1 [2025-09-23 16:00:36.087] kernel.modules_disabled = 1 [2025-09-23 16:00:36.279] [2025-09-23 16:00:36.279] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:00:37.372] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:00:45.140] SBL1:1210.0.1.0 [2025-09-23 16:00:45.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:00:46.754] SBL2:1210.0.1.0 [2025-09-23 16:00:46.802] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 16:00:46.899] j-A [2025-09-23 16:00:54.251] The R5 Autosar Classic is running [2025-09-23 16:00:54.276] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:00:54.276] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:00:54.884] INIT: version 2.96 booting [2025-09-23 16:00:54.996] INIT: Entering runlevel: 5 [2025-09-23 16:00:55.155] mtd28 attached [2025-09-23 16:00:55.171] mtd32 attached [2025-09-23 16:00:55.188] mtd24 attached [2025-09-23 16:00:55.295] ubi0:animations is mounted. [2025-09-23 16:00:55.296] RTNETLINK answers: File exists [2025-09-23 16:00:55.296] ubi2:textures is mounted. [2025-09-23 16:00:55.296] ubi1:dml_code is mounted. [2025-09-23 16:00:55.296] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:00:55.296] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:00:55.296] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:00:55.296] data.LB_FadeInType0=100 [2025-09-23 16:00:55.296] data.CHLH_FadeInType0=0 [2025-09-23 16:00:55.296] data.WU_FadeInDelay=0 [2025-09-23 16:00:55.296] max_time_out=0 [2025-09-23 16:00:55.296] No splash screen [2025-09-23 16:00:55.296] stop dss Done [2025-09-23 16:00:55.296] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:00:55.296] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:00:55.339] /dev/mem opened. [2025-09-23 16:00:55.339] Memory mapped at address 0xffffaaf5e000. [2025-09-23 16:00:55.384] Read at address 0x00600018 (0xffffaaf5e018): 0x00000000 [2025-09-23 16:00:55.384] Write at address 0x00600018 (0xffffaaf5e018): 0x00400040, readback 0x00400040 [2025-09-23 16:00:55.384] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:00:55.384] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:00:55.576] Loaded PowerVR consumer services. [2025-09-23 16:00:55.656] Waiting data available... [2025-09-23 16:00:55.688] 512+0 records in [2025-09-23 16:00:55.688] 512+0 records out [2025-09-23 16:00:55.704] Starting syslogd/klogd: done [2025-09-23 16:00:55.720] DML Start [2025-09-23 16:00:55.880] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:00:56.072] DML res1: 0 [2025-09-23 16:00:56.530] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:00:56.530] Read Success [2025-09-23 16:00:56.530] Verifying certificate... [2025-09-23 16:00:56.786] Verified OK [2025-09-23 16:00:56.818] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:00:58.451] Verified OK [2025-09-23 16:00:58.451] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:00:59.069] Verified OK [2025-09-23 16:00:59.069] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:01:01.771] fs.protected_hardlinks = 1 [2025-09-23 16:01:01.771] fs.protected_symlinks = 1 [2025-09-23 16:01:01.787] kernel.modules_disabled = 1 [2025-09-23 16:01:01.981] [2025-09-23 16:01:01.981] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:01:03.218] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:01:10.936] SBL1:1210.0.1.0 [2025-09-23 16:01:10.967] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:01:12.550] SBL2:1210.0.1.0 [2025-09-23 16:01:12.582] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:01:12.694] j-A [2025-09-23 16:01:20.047] The R5 Autosar Classic is running [2025-09-23 16:01:20.047] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:01:20.068] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:01:20.676] INIT: version 2.96 booting [2025-09-23 16:01:21.090] INIT: Entering runlevel: 5 [2025-09-23 16:01:21.090] mtd28 attached [2025-09-23 16:01:21.090] mtd24 attached [2025-09-23 16:01:21.090] mtd32 attached [2025-09-23 16:01:21.090] RTNETLINK answers: File exists [2025-09-23 16:01:21.090] ubi1:textures is mounted. [2025-09-23 16:01:21.090] ubi0:animations is mounted. [2025-09-23 16:01:21.090] ubi2:dml_code is mounted. [2025-09-23 16:01:21.090] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:01:21.090] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:01:21.090] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:01:21.090] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:01:21.090] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:01:21.090] data.LB_FadeInType0=100 [2025-09-23 16:01:21.090] data.CHLH_FadeInType0=0 [2025-09-23 16:01:21.090] data.WU_FadeInDelay=0 [2025-09-23 16:01:21.090] max_time_out=0 [2025-09-23 16:01:21.090] No splash screen [2025-09-23 16:01:21.090] stop dss Done [2025-09-23 16:01:21.145] /dev/mem opened. [2025-09-23 16:01:21.145] Memory mapped at address 0xffffaeda6000. [2025-09-23 16:01:21.145] Read at address 0x00600018 (0xffffaeda6018): 0x00000000 [2025-09-23 16:01:21.145] Write at address 0x00600018 (0xffffaeda6018): 0x00400040, readback 0x00400040 [2025-09-23 16:01:21.145] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:01:21.162] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:01:21.289] Loaded PowerVR consumer services. [2025-09-23 16:01:21.418] Waiting data available... [2025-09-23 16:01:21.433] 512+0 records in [2025-09-23 16:01:21.433] 512+0 records out [2025-09-23 16:01:21.497] Starting syslogd/klogd: done [2025-09-23 16:01:21.513] DML Start [2025-09-23 16:01:21.690] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:01:21.928] DML res1: 0 [2025-09-23 16:01:22.357] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:01:22.357] Read Success [2025-09-23 16:01:22.357] Verifying certificate... [2025-09-23 16:01:22.596] Verified OK [2025-09-23 16:01:22.612] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:01:24.180] Verified OK [2025-09-23 16:01:24.180] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:01:24.814] Verified OK [2025-09-23 16:01:24.814] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:01:27.579] fs.protected_hardlinks = 1 [2025-09-23 16:01:27.595] fs.protected_symlinks = 1 [2025-09-23 16:01:27.595] kernel.modules_disabled = 1 [2025-09-23 16:01:27.803] [2025-09-23 16:01:27.803] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:01:28.996] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:01:36.720] SBL1:1210.0.1.0 [2025-09-23 16:01:36.752] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:01:38.335] SBL2:1210.0.1.0 [2025-09-23 16:01:38.367] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:01:38.478] j-A [2025-09-23 16:01:45.832] The R5 Autosar Classic is running [2025-09-23 16:01:45.832] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:01:45.853] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:01:46.460] INIT: version 2.96 booting [2025-09-23 16:01:46.872] INIT: Entering runlevel: 5 [2025-09-23 16:01:46.872] mtd24 attached [2025-09-23 16:01:46.872] mtd28 attached [2025-09-23 16:01:46.872] mtd32 attached [2025-09-23 16:01:46.872] ubi0:textures is mounted. [2025-09-23 16:01:46.872] ubi1:animations is mounted. [2025-09-23 16:01:46.872] RTNETLINK answers: File exists [2025-09-23 16:01:46.872] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:01:46.872] ubi2:dml_code is mounted. [2025-09-23 16:01:46.872] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:01:46.872] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:01:46.872] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:01:46.872] data.LB_FadeInType0=100 [2025-09-23 16:01:46.872] data.CHLH_FadeInType0=0 [2025-09-23 16:01:46.872] data.WU_FadeInDelay=0 [2025-09-23 16:01:46.872] max_time_out=0 [2025-09-23 16:01:46.872] No splash screen [2025-09-23 16:01:46.872] stop dss Done [2025-09-23 16:01:46.872] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:01:46.920] /dev/mem opened. [2025-09-23 16:01:46.920] Memory mapped at address 0xffff8c5a9000. [2025-09-23 16:01:46.920] Read at address 0x00600018 (0xffff8c5a9018): 0x00000000 [2025-09-23 16:01:46.920] Write at address 0x00600018 (0xffff8c5a9018): 0x00400040, readback 0x00400040 [2025-09-23 16:01:46.920] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:01:46.936] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:01:47.032] Loaded PowerVR consumer services. [2025-09-23 16:01:47.192] Waiting data available... [2025-09-23 16:01:47.207] 512+0 records in [2025-09-23 16:01:47.207] 512+0 records out [2025-09-23 16:01:47.223] Starting syslogd/klogd: done [2025-09-23 16:01:47.255] DML Start [2025-09-23 16:01:47.448] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:01:47.640] DML res1: 0 [2025-09-23 16:01:48.109] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:01:48.109] Read Success [2025-09-23 16:01:48.109] Verifying certificate... [2025-09-23 16:01:48.365] Verified OK [2025-09-23 16:01:48.381] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:01:50.119] Verified OK [2025-09-23 16:01:50.119] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:01:50.741] Verified OK [2025-09-23 16:01:50.741] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:01:53.362] fs.protected_hardlinks = 1 [2025-09-23 16:01:53.362] fs.protected_symlinks = 1 [2025-09-23 16:01:53.378] kernel.modules_disabled = 1 [2025-09-23 16:01:53.570] [2025-09-23 16:01:53.570] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:01:54.669] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:02:02.476] SBL1:1210.0.1.0 [2025-09-23 16:02:02.524] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:02:04.090] SBL2:1210.0.1.0 [2025-09-23 16:02:04.138] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:02:04.251] j-A [2025-09-23 16:02:11.621] The R5 Autosar Classic is running [2025-09-23 16:02:11.621] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:02:11.621] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:02:12.229] INIT: version 2.96 booting [2025-09-23 16:02:12.340] INIT: Entering runlevel: 5 [2025-09-23 16:02:12.485] mtd32 attached [2025-09-23 16:02:12.501] mtd24 attached [2025-09-23 16:02:12.516] mtd28 attached [2025-09-23 16:02:12.597] RTNETLINK answers: File exists [2025-09-23 16:02:12.597] ubi0:dml_code is mounted. [2025-09-23 16:02:12.597] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:02:12.597] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:02:12.597] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:02:12.597] ubi2:animations is mounted. [2025-09-23 16:02:12.597] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:02:12.597] ubi1:textures is mounted. [2025-09-23 16:02:12.597] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:02:12.671] data.LB_FadeInType0=100 [2025-09-23 16:02:12.671] data.CHLH_FadeInType0=0 [2025-09-23 16:02:12.671] data.WU_FadeInDelay=0 [2025-09-23 16:02:12.671] max_time_out=0 [2025-09-23 16:02:12.671] No splash screen [2025-09-23 16:02:12.671] stop dss Done [2025-09-23 16:02:12.673] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:02:12.673] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:02:12.689] /dev/mem opened. [2025-09-23 16:02:12.721] Memory mapped at address 0xffff80775000. [2025-09-23 16:02:12.721] Read at address 0x00600018 (0xffff80775018): 0x00000000 [2025-09-23 16:02:12.721] Write at address 0x00600018 (0xffff80775018): 0x00400040, readback 0x00400040 [2025-09-23 16:02:12.802] Loaded PowerVR consumer services. [2025-09-23 16:02:12.972] Waiting data available... [2025-09-23 16:02:12.972] 512+0 records in [2025-09-23 16:02:12.972] 512+0 records out [2025-09-23 16:02:13.004] Starting syslogd/klogd: done [2025-09-23 16:02:13.020] DML Start [2025-09-23 16:02:13.196] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:02:13.420] DML res1: 0 [2025-09-23 16:02:13.880] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:02:13.880] Read Success [2025-09-23 16:02:13.880] Verifying certificate... [2025-09-23 16:02:14.136] Verified OK [2025-09-23 16:02:14.136] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:02:15.894] Verified OK [2025-09-23 16:02:15.894] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:02:16.422] Verified OK [2025-09-23 16:02:16.422] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:02:18.979] fs.protected_hardlinks = 1 [2025-09-23 16:02:18.979] fs.protected_symlinks = 1 [2025-09-23 16:02:18.979] kernel.modules_disabled = 1 [2025-09-23 16:02:19.171] [2025-09-23 16:02:19.171] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:02:20.513] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:02:28.248] SBL1:1210.0.1.0 [2025-09-23 16:02:28.296] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:02:29.862] SBL2:1210.0.1.0 [2025-09-23 16:02:29.910] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:02:30.007] j-A [2025-09-23 16:02:37.360] The R5 Autosar Classic is running [2025-09-23 16:02:37.384] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:02:37.384] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:02:37.992] INIT: version 2.96 booting [2025-09-23 16:02:38.404] INIT: Entering runlevel: 5 [2025-09-23 16:02:38.404] mtd32 attached [2025-09-23 16:02:38.404] mtd24 attached [2025-09-23 16:02:38.404] mtd28 attached [2025-09-23 16:02:38.404] RTNETLINK answers: File exists [2025-09-23 16:02:38.404] ubi1:textures is mounted. [2025-09-23 16:02:38.404] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:02:38.404] ubi0:dml_code is mounted. [2025-09-23 16:02:38.404] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:02:38.404] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:02:38.404] ubi2:animations is mounted. [2025-09-23 16:02:38.404] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:02:38.404] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:02:38.404] data.LB_FadeInType0=100 [2025-09-23 16:02:38.406] data.CHLH_FadeInType0=0 [2025-09-23 16:02:38.406] data.WU_FadeInDelay=0 [2025-09-23 16:02:38.406] max_time_out=0 [2025-09-23 16:02:38.406] No splash screen [2025-09-23 16:02:38.406] stop dss Done [2025-09-23 16:02:38.436] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:02:38.436] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:02:38.488] /dev/mem opened. [2025-09-23 16:02:38.488] Memory mapped at address 0xffffb8e26000. [2025-09-23 16:02:38.488] Read at address 0x00600018 (0xffffb8e26018): 0x00000000 [2025-09-23 16:02:38.488] Write at address 0x00600018 (0xffffb8e26018): 0x00400040, readback 0x00400040 [2025-09-23 16:02:38.552] Loaded PowerVR consumer services. [2025-09-23 16:02:38.745] Waiting data available... [2025-09-23 16:02:38.760] 512+0 records in [2025-09-23 16:02:38.760] 512+0 records out [2025-09-23 16:02:38.808] Starting syslogd/klogd: done [2025-09-23 16:02:38.824] DML Start [2025-09-23 16:02:39.000] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:02:39.239] DML res1: 0 [2025-09-23 16:02:39.679] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:02:39.679] Read Success [2025-09-23 16:02:39.679] Verifying certificate... [2025-09-23 16:02:39.935] Verified OK [2025-09-23 16:02:39.935] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:02:41.660] Verified OK [2025-09-23 16:02:41.660] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:02:42.220] Verified OK [2025-09-23 16:02:42.220] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:02:44.681] fs.protected_hardlinks = 1 [2025-09-23 16:02:44.697] fs.protected_symlinks = 1 [2025-09-23 16:02:44.697] kernel.modules_disabled = 1 [2025-09-23 16:02:44.905] [2025-09-23 16:02:44.905] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:02:46.294] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:02:54.023] SBL1:1210.0.1.0 [2025-09-23 16:02:54.071] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:02:55.637] SBL2:1210.0.1.0 [2025-09-23 16:02:55.685] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 16:02:55.798] j-A [2025-09-23 16:03:03.136] The R5 Autosar Classic is running [2025-09-23 16:03:03.161] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:03:03.161] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:03:03.768] INIT: version 2.96 booting [2025-09-23 16:03:03.880] INIT: Entering runlevel: 5 [2025-09-23 16:03:04.186] mtd28 attached [2025-09-23 16:03:04.186] mtd24 attached [2025-09-23 16:03:04.186] mtd32 attached [2025-09-23 16:03:04.186] ubi0:animations is mounted. [2025-09-23 16:03:04.186] ubi1:textures is mounted. [2025-09-23 16:03:04.186] RTNETLINK answers: File exists [2025-09-23 16:03:04.186] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:03:04.186] ubi2:dml_code is mounted. [2025-09-23 16:03:04.186] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:03:04.186] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:03:04.186] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:03:04.186] data.LB_FadeInType0=100 [2025-09-23 16:03:04.186] data.CHLH_FadeInType0=0 [2025-09-23 16:03:04.186] data.WU_FadeInDelay=0 [2025-09-23 16:03:04.186] max_time_out=0 [2025-09-23 16:03:04.186] No splash screen [2025-09-23 16:03:04.186] stop dss Done [2025-09-23 16:03:04.186] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:03:04.227] /dev/mem opened. [2025-09-23 16:03:04.227] Memory mapped at address 0xffffb98da000. [2025-09-23 16:03:04.227] Read at address 0x00600018 (0xffffb98da018): 0x00000000 [2025-09-23 16:03:04.227] Write at address 0x00600018 (0xffffb98da018): 0x00400040, readback 0x00400040 [2025-09-23 16:03:04.275] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:03:04.275] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:03:04.418] Loaded PowerVR consumer services. [2025-09-23 16:03:04.531] Waiting data available... [2025-09-23 16:03:04.547] 512+0 records in [2025-09-23 16:03:04.547] 512+0 records out [2025-09-23 16:03:04.594] Starting syslogd/klogd: done [2025-09-23 16:03:04.610] DML Start [2025-09-23 16:03:04.786] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:03:05.010] DML res1: 0 [2025-09-23 16:03:05.426] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:03:05.716] Read Success [2025-09-23 16:03:05.716] Verifying certificate... [2025-09-23 16:03:05.717] Verified OK [2025-09-23 16:03:05.717] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:03:07.381] Verified OK [2025-09-23 16:03:07.381] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:03:07.946] Verified OK [2025-09-23 16:03:07.946] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:03:10.601] fs.protected_hardlinks = 1 [2025-09-23 16:03:10.602] fs.protected_symlinks = 1 [2025-09-23 16:03:10.602] kernel.modules_disabled = 1 [2025-09-23 16:03:10.792] [2025-09-23 16:03:10.792] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:03:12.015] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:03:19.774] SBL1:1210.0.1.0 [2025-09-23 16:03:19.822] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:03:21.405] SBL2:1210.0.1.0 [2025-09-23 16:03:21.453] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 16:03:21.549] j-A [2025-09-23 16:03:28.920] The R5 Autosar Classic is running [2025-09-23 16:03:28.920] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:03:28.920] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:03:29.528] INIT: version 2.96 booting [2025-09-23 16:03:29.639] INIT: Entering runlevel: 5 [2025-09-23 16:03:29.968] mtd24 attached [2025-09-23 16:03:29.968] mtd28 attached [2025-09-23 16:03:29.968] mtd32 attached [2025-09-23 16:03:29.968] ubi0:textures is mounted. [2025-09-23 16:03:29.968] ubi1:animations is mounted. [2025-09-23 16:03:29.968] RTNETLINK answers: File exists [2025-09-23 16:03:29.968] ubi2:dml_code is mounted. [2025-09-23 16:03:29.968] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:03:29.968] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:03:29.968] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:03:29.968] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:03:29.968] data.LB_FadeInType0=100 [2025-09-23 16:03:29.968] data.CHLH_FadeInType0=0 [2025-09-23 16:03:29.968] data.WU_FadeInDelay=0 [2025-09-23 16:03:29.968] max_time_out=0 [2025-09-23 16:03:29.968] No splash screen [2025-09-23 16:03:29.968] stop dss Done [2025-09-23 16:03:29.968] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:03:29.999] /dev/mem opened. [2025-09-23 16:03:29.999] Memory mapped at address 0xffff9c275000. [2025-09-23 16:03:29.999] Read at address 0x00600018 (0xffff9c275018): 0x00000000 [2025-09-23 16:03:29.999] Write at address 0x00600018 (0xffff9c275018): 0x00400040, readback 0x00400040 [2025-09-23 16:03:29.999] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:03:29.999] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:03:30.223] Loaded PowerVR consumer services. [2025-09-23 16:03:30.287] Waiting data available... [2025-09-23 16:03:30.319] 512+0 records in [2025-09-23 16:03:30.319] 512+0 records out [2025-09-23 16:03:30.351] Starting syslogd/klogd: done [2025-09-23 16:03:30.367] DML Start [2025-09-23 16:03:30.559] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:03:30.783] DML res1: 0 [2025-09-23 16:03:31.134] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:03:31.155] Read Success [2025-09-23 16:03:31.155] Verifying certificate... [2025-09-23 16:03:31.395] Verified OK [2025-09-23 16:03:31.411] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:03:33.073] Verified OK [2025-09-23 16:03:33.109] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:03:33.669] Verified OK [2025-09-23 16:03:33.669] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:03:36.388] fs.protected_hardlinks = 1 [2025-09-23 16:03:36.422] fs.protected_symlinks = 1 [2025-09-23 16:03:36.422] kernel.modules_disabled = 1 [2025-09-23 16:03:36.611] [2025-09-23 16:03:36.611] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:03:37.866] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:03:45.557] SBL1:1210.0.1.0 [2025-09-23 16:03:45.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:03:47.172] SBL2:1210.0.1.0 [2025-09-23 16:03:47.204] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:03:47.315] j-A [2025-09-23 16:03:54.690] The R5 Autosar Classic is running [2025-09-23 16:03:54.690] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:03:54.690] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:03:55.297] INIT: version 2.96 booting [2025-09-23 16:03:55.409] INIT: Entering runlevel: 5 [2025-09-23 16:03:55.748] mtd28 attached [2025-09-23 16:03:55.748] mtd32 attached [2025-09-23 16:03:55.748] mtd24 attached [2025-09-23 16:03:55.748] RTNETLINK answers: File exists [2025-09-23 16:03:55.748] ubi2:textures is mounted. [2025-09-23 16:03:55.748] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:03:55.748] ubi0:animations is mounted. [2025-09-23 16:03:55.749] ubi1:dml_code is mounted. [2025-09-23 16:03:55.749] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:03:55.749] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:03:55.749] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:03:55.749] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:03:55.749] data.LB_FadeInType0=100 [2025-09-23 16:03:55.749] data.CHLH_FadeInType0=0 [2025-09-23 16:03:55.749] data.WU_FadeInDelay=0 [2025-09-23 16:03:55.749] max_time_out=0 [2025-09-23 16:03:55.749] No splash screen [2025-09-23 16:03:55.749] stop dss Done [2025-09-23 16:03:55.773] /dev/mem opened. [2025-09-23 16:03:55.773] Memory mapped at address 0xffffb9b96000. [2025-09-23 16:03:55.773] Read at address 0x00600018 (0xffffb9b96018): 0x00000000 [2025-09-23 16:03:55.773] Write at address 0x00600018 (0xffffb9b96018): 0x00400040, readback 0x00400040 [2025-09-23 16:03:55.773] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:03:55.773] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:03:55.964] Loaded PowerVR consumer services. [2025-09-23 16:03:56.045] Waiting data available... [2025-09-23 16:03:56.061] 512+0 records in [2025-09-23 16:03:56.061] 512+0 records out [2025-09-23 16:03:56.108] Starting syslogd/klogd: done [2025-09-23 16:03:56.124] DML Start [2025-09-23 16:03:56.285] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:03:56.492] DML res1: 0 [2025-09-23 16:03:56.996] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:03:56.996] Read Success [2025-09-23 16:03:56.996] Verifying certificate... [2025-09-23 16:03:57.268] Verified OK [2025-09-23 16:03:57.284] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:03:58.920] Verified OK [2025-09-23 16:03:58.920] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:03:59.506] Verified OK [2025-09-23 16:03:59.506] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:04:02.175] fs.protected_hardlinks = 1 [2025-09-23 16:04:02.191] fs.protected_symlinks = 1 [2025-09-23 16:04:02.191] kernel.modules_disabled = 1 [2025-09-23 16:04:02.383] [2025-09-23 16:04:02.383] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:04:03.547] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:04:11.313] SBL1:1210.0.1.0 [2025-09-23 16:04:11.361] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:04:12.928] SBL2:1210.0.1.0 [2025-09-23 16:04:12.976] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:04:13.087] j-A [2025-09-23 16:04:20.426] The R5 Autosar Classic is running [2025-09-23 16:04:20.451] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:04:20.451] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:04:21.059] INIT: version 2.96 booting [2025-09-23 16:04:21.170] INIT: Entering runlevel: 5 [2025-09-23 16:04:21.452] mtd28 attached [2025-09-23 16:04:21.452] mtd32 attached [2025-09-23 16:04:21.452] mtd24 attached [2025-09-23 16:04:21.452] ubi0:animations is mounted. [2025-09-23 16:04:21.452] RTNETLINK answers: File exists [2025-09-23 16:04:21.454] ubi2:textures is mounted. [2025-09-23 16:04:21.454] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:04:21.454] ubi1:dml_code is mounted. [2025-09-23 16:04:21.454] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:04:21.454] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:04:21.454] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:04:21.454] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:04:21.454] data.LB_FadeInType0=100 [2025-09-23 16:04:21.454] data.CHLH_FadeInType0=0 [2025-09-23 16:04:21.454] data.WU_FadeInDelay=0 [2025-09-23 16:04:21.454] max_time_out=0 [2025-09-23 16:04:21.454] No splash screen [2025-09-23 16:04:21.454] stop dss Done [2025-09-23 16:04:21.548] /dev/mem opened. [2025-09-23 16:04:21.548] Memory mapped at address 0xffff8e4f2000. [2025-09-23 16:04:21.548] Read at address 0x00600018 (0xffff8e4f2018): 0x00000000 [2025-09-23 16:04:21.548] Write at address 0x00600018 (0xffff8e4f2018): 0x00400040, readback 0x00400040 [2025-09-23 16:04:21.548] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:04:21.548] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:04:21.787] Loaded PowerVR consumer services. [2025-09-23 16:04:21.835] Waiting data available... [2025-09-23 16:04:21.851] 512+0 records in [2025-09-23 16:04:21.851] 512+0 records out [2025-09-23 16:04:21.883] Starting syslogd/klogd: done [2025-09-23 16:04:21.899] DML Start [2025-09-23 16:04:22.043] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:04:22.315] DML res1: 0 [2025-09-23 16:04:22.756] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:04:22.756] Read Success [2025-09-23 16:04:22.756] Verifying certificate... [2025-09-23 16:04:23.044] Verified OK [2025-09-23 16:04:23.075] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:04:24.589] Verified OK [2025-09-23 16:04:24.589] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:04:25.110] Verified OK [2025-09-23 16:04:25.110] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:04:27.940] fs.protected_hardlinks = 1 [2025-09-23 16:04:27.956] fs.protected_symlinks = 1 [2025-09-23 16:04:27.956] kernel.modules_disabled = 1 [2025-09-23 16:04:28.164] [2025-09-23 16:04:28.164] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:04:29.425] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:04:37.080] SBL1:1210.0.1.0 [2025-09-23 16:04:37.128] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:04:38.695] SBL2:1210.0.1.0 [2025-09-23 16:04:38.743] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:04:38.838] j-A [2025-09-23 16:04:46.193] The R5 Autosar Classic is running [2025-09-23 16:04:46.215] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:04:46.215] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:04:46.823] INIT: version 2.96 booting [2025-09-23 16:04:46.935] INIT: Entering runlevel: 5 [2025-09-23 16:04:47.079] mtd24 attached [2025-09-23 16:04:47.095] mtd28 attached [2025-09-23 16:04:47.111] mtd32 attached [2025-09-23 16:04:47.264] ubi0:textures is mounted. [2025-09-23 16:04:47.265] ubi1:animations is mounted. [2025-09-23 16:04:47.265] RTNETLINK answers: File exists [2025-09-23 16:04:47.265] ubi2:dml_code is mounted. [2025-09-23 16:04:47.265] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:04:47.265] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:04:47.265] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:04:47.265] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:04:47.265] data.LB_FadeInType0=100 [2025-09-23 16:04:47.265] data.CHLH_FadeInType0=0 [2025-09-23 16:04:47.265] data.WU_FadeInDelay=0 [2025-09-23 16:04:47.265] max_time_out=0 [2025-09-23 16:04:47.265] No splash screen [2025-09-23 16:04:47.265] stop dss Done [2025-09-23 16:04:47.265] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:04:47.265] /dev/mem opened. [2025-09-23 16:04:47.290] Memory mapped at address 0xffff9bbce000. [2025-09-23 16:04:47.290] Read at address 0x00600018 (0xffff9bbce018): 0x00000000 [2025-09-23 16:04:47.290] Write at address 0x00600018 (0xffff9bbce018): 0x00400040, readback 0x00400040 [2025-09-23 16:04:47.290] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:04:47.290] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:04:47.434] Loaded PowerVR consumer services. [2025-09-23 16:04:47.546] Waiting data available... [2025-09-23 16:04:47.577] 512+0 records in [2025-09-23 16:04:47.577] 512+0 records out [2025-09-23 16:04:47.609] Starting syslogd/klogd: done [2025-09-23 16:04:47.641] DML Start [2025-09-23 16:04:47.801] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:04:48.264] DML res1: 0 [2025-09-23 16:04:48.464] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:04:48.464] Read Success [2025-09-23 16:04:48.464] Verifying certificate... [2025-09-23 16:04:48.688] Verified OK [2025-09-23 16:04:48.704] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:04:50.255] Verified OK [2025-09-23 16:04:50.255] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:04:50.846] Verified OK [2025-09-23 16:04:50.846] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:04:53.628] fs.protected_hardlinks = 1 [2025-09-23 16:04:53.628] fs.protected_symlinks = 1 [2025-09-23 16:04:53.644] kernel.modules_disabled = 1 [2025-09-23 16:04:53.835] [2025-09-23 16:04:53.835] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:04:55.051] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:05:02.836] SBL1:1210.0.1.0 [2025-09-23 16:05:02.867] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:05:04.451] SBL2:1210.0.1.0 [2025-09-23 16:05:04.485] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:05:04.594] j-A [2025-09-23 16:05:11.968] The R5 Autosar Classic is running [2025-09-23 16:05:11.968] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:05:11.968] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:05:12.575] INIT: version 2.96 booting [2025-09-23 16:05:12.687] INIT: Entering runlevel: 5 [2025-09-23 16:05:13.017] mtd32 attached [2025-09-23 16:05:13.017] mtd24 attached [2025-09-23 16:05:13.017] mtd28 attached [2025-09-23 16:05:13.017] RTNETLINK answers: File exists [2025-09-23 16:05:13.017] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:05:13.017] ubi0:dml_code is mounted. [2025-09-23 16:05:13.017] ubi1:textures is mounted. [2025-09-23 16:05:13.017] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:05:13.017] ubi2:animations is mounted. [2025-09-23 16:05:13.017] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:05:13.017] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:05:13.017] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:05:13.017] data.LB_FadeInType0=100 [2025-09-23 16:05:13.017] data.CHLH_FadeInType0=0 [2025-09-23 16:05:13.017] data.WU_FadeInDelay=0 [2025-09-23 16:05:13.017] max_time_out=0 [2025-09-23 16:05:13.017] No splash screen [2025-09-23 16:05:13.017] stop dss Done [2025-09-23 16:05:13.023] /dev/mem opened. [2025-09-23 16:05:13.023] Memory mapped at address 0xffff8764a000. [2025-09-23 16:05:13.060] Read at address 0x00600018 (0xffff8764a018): 0x00000000 [2025-09-23 16:05:13.060] Write at address 0x00600018 (0xffff8764a018): 0x00400040, readback 0x00400040 [2025-09-23 16:05:13.060] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:05:13.060] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:05:13.172] Loaded PowerVR consumer services. [2025-09-23 16:05:13.316] Waiting data available... [2025-09-23 16:05:13.332] 512+0 records in [2025-09-23 16:05:13.332] 512+0 records out [2025-09-23 16:05:13.380] Starting syslogd/klogd: done [2025-09-23 16:05:13.396] DML Start [2025-09-23 16:05:13.539] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:05:14.030] DML res1: 0 [2025-09-23 16:05:14.243] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:05:14.243] Read Success [2025-09-23 16:05:14.259] Verifying certificate... [2025-09-23 16:05:14.514] Verified OK [2025-09-23 16:05:14.546] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:05:16.234] Verified OK [2025-09-23 16:05:16.234] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:05:16.779] Verified OK [2025-09-23 16:05:16.779] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:05:19.368] fs.protected_hardlinks = 1 [2025-09-23 16:05:19.368] fs.protected_symlinks = 1 [2025-09-23 16:05:19.391] kernel.modules_disabled = 1 [2025-09-23 16:05:19.577] [2025-09-23 16:05:19.577] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:05:20.820] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:05:28.592] SBL1:1210.0.1.0 [2025-09-23 16:05:28.640] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:05:30.206] SBL2:1210.0.1.0 [2025-09-23 16:05:30.254] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:05:30.350] j-A [2025-09-23 16:05:37.704] The R5 Autosar Classic is running [2025-09-23 16:05:37.726] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:05:37.726] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:05:38.333] INIT: version 2.96 booting [2025-09-23 16:05:38.748] INIT: Entering runlevel: 5 [2025-09-23 16:05:38.748] mtd32 attached [2025-09-23 16:05:38.748] mtd24 attached [2025-09-23 16:05:38.748] mtd28 attached [2025-09-23 16:05:38.748] ubi0:dml_code is mounted. [2025-09-23 16:05:38.748] RTNETLINK answers: File exists [2025-09-23 16:05:38.748] ubi1:textures is mounted. [2025-09-23 16:05:38.748] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:05:38.748] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:05:38.748] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:05:38.748] ubi2:animations is mounted. [2025-09-23 16:05:38.748] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:05:38.748] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:05:38.748] data.LB_FadeInType0=100 [2025-09-23 16:05:38.748] data.CHLH_FadeInType0=0 [2025-09-23 16:05:38.748] data.WU_FadeInDelay=0 [2025-09-23 16:05:38.748] max_time_out=0 [2025-09-23 16:05:38.748] No splash screen [2025-09-23 16:05:38.748] stop dss Done [2025-09-23 16:05:38.748] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:05:38.762] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:05:38.804] /dev/mem opened. [2025-09-23 16:05:38.804] Memory mapped at address 0xffffa39fa000. [2025-09-23 16:05:38.804] Read at address 0x00600018 (0xffffa39fa018): 0x00000000 [2025-09-23 16:05:38.804] Write at address 0x00600018 (0xffffa39fa018): 0x00400040, readback 0x00400040 [2025-09-23 16:05:38.884] Loaded PowerVR consumer services. [2025-09-23 16:05:39.059] Waiting data available... [2025-09-23 16:05:39.091] 512+0 records in [2025-09-23 16:05:39.091] 512+0 records out [2025-09-23 16:05:39.140] Starting syslogd/klogd: done [2025-09-23 16:05:39.156] DML Start [2025-09-23 16:05:39.347] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:05:39.749] DML res1: 0 [2025-09-23 16:05:39.948] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:05:39.948] Read Success [2025-09-23 16:05:39.948] Verifying certificate... [2025-09-23 16:05:40.187] Verified OK [2025-09-23 16:05:40.203] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:05:41.875] Verified OK [2025-09-23 16:05:41.875] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:05:42.495] Verified OK [2025-09-23 16:05:42.495] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:05:45.115] fs.protected_hardlinks = 1 [2025-09-23 16:05:45.115] fs.protected_symlinks = 1 [2025-09-23 16:05:45.115] kernel.modules_disabled = 1 [2025-09-23 16:05:45.290] [2025-09-23 16:05:45.290] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:05:46.694] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:05:54.358] SBL1:1210.0.1.0 [2025-09-23 16:05:54.406] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:05:55.972] SBL2:1210.0.1.0 [2025-09-23 16:05:56.020] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:05:56.116] j-A [2025-09-23 16:06:03.470] The R5 Autosar Classic is running [2025-09-23 16:06:03.495] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:06:03.495] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:06:04.103] INIT: version 2.96 booting [2025-09-23 16:06:04.215] INIT: Entering runlevel: 5 [2025-09-23 16:06:04.530] mtd24 attached [2025-09-23 16:06:04.530] mtd28 attached [2025-09-23 16:06:04.530] mtd32 attached [2025-09-23 16:06:04.530] ubi0:textures is mounted. [2025-09-23 16:06:04.530] RTNETLINK answers: File exists [2025-09-23 16:06:04.530] ubi1:animations is mounted. [2025-09-23 16:06:04.530] ubi2:dml_code is mounted. [2025-09-23 16:06:04.530] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:06:04.530] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:06:04.530] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:06:04.530] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:06:04.530] data.LB_FadeInType0=100 [2025-09-23 16:06:04.530] data.CHLH_FadeInType0=0 [2025-09-23 16:06:04.530] data.WU_FadeInDelay=0 [2025-09-23 16:06:04.530] max_time_out=0 [2025-09-23 16:06:04.530] No splash screen [2025-09-23 16:06:04.530] stop dss Done [2025-09-23 16:06:04.530] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:06:04.542] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:06:04.583] /dev/mem opened. [2025-09-23 16:06:04.583] Memory mapped at address 0xffffb8b12000. [2025-09-23 16:06:04.583] Read at address 0x00600018 (0xffffb8b12018): 0x00000000 [2025-09-23 16:06:04.583] Write at address 0x00600018 (0xffffb8b12018): 0x00400040, readback 0x00400040 [2025-09-23 16:06:04.583] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:06:04.664] Loaded PowerVR consumer services. [2025-09-23 16:06:04.839] Waiting data available... [2025-09-23 16:06:04.855] 512+0 records in [2025-09-23 16:06:04.855] 512+0 records out [2025-09-23 16:06:04.871] Starting syslogd/klogd: done [2025-09-23 16:06:04.903] DML Start [2025-09-23 16:06:05.095] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:06:05.530] DML res1: 0 [2025-09-23 16:06:05.773] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:06:05.773] Read Success [2025-09-23 16:06:05.773] Verifying certificate... [2025-09-23 16:06:06.013] Verified OK [2025-09-23 16:06:06.029] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:06:07.645] Verified OK [2025-09-23 16:06:07.645] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:06:08.314] Verified OK [2025-09-23 16:06:08.314] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:06:10.968] fs.protected_hardlinks = 1 [2025-09-23 16:06:10.968] fs.protected_symlinks = 1 [2025-09-23 16:06:10.984] kernel.modules_disabled = 1 [2025-09-23 16:06:11.176] [2025-09-23 16:06:11.176] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:06:12.360] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:06:20.118] SBL1:1210.0.1.0 [2025-09-23 16:06:20.149] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:06:21.732] SBL2:1210.0.1.0 [2025-09-23 16:06:21.767] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:06:21.876] j-A [2025-09-23 16:06:29.229] The R5 Autosar Classic is running [2025-09-23 16:06:29.250] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:06:29.250] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:06:29.858] INIT: version 2.96 booting [2025-09-23 16:06:30.265] INIT: Entering runlevel: 5 [2025-09-23 16:06:30.265] mtd28 attached [2025-09-23 16:06:30.265] mtd24 attached [2025-09-23 16:06:30.265] mtd32 attached [2025-09-23 16:06:30.265] ubi0:animations is mounted. [2025-09-23 16:06:30.265] RTNETLINK answers: File exists [2025-09-23 16:06:30.265] ubi1:textures is mounted. [2025-09-23 16:06:30.265] ubi2:dml_code is mounted. [2025-09-23 16:06:30.265] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:06:30.265] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:06:30.265] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:06:30.265] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:06:30.265] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:06:30.265] data.LB_FadeInType0=100 [2025-09-23 16:06:30.265] data.CHLH_FadeInType0=0 [2025-09-23 16:06:30.265] data.WU_FadeInDelay=0 [2025-09-23 16:06:30.265] max_time_out=0 [2025-09-23 16:06:30.265] No splash screen [2025-09-23 16:06:30.265] stop dss Done [2025-09-23 16:06:30.350] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:06:30.350] /dev/mem opened. [2025-09-23 16:06:30.350] Memory mapped at address 0xffffb2712000. [2025-09-23 16:06:30.350] Read at address 0x00600018 (0xffffb2712018): 0x00000000 [2025-09-23 16:06:30.350] Write at address 0x00600018 (0xffffb2712018): 0x00400040, readback 0x00400040 [2025-09-23 16:06:30.350] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:06:30.558] Loaded PowerVR consumer services. [2025-09-23 16:06:30.622] 512+0 records in [2025-09-23 16:06:30.622] 512+0 records out [2025-09-23 16:06:30.638] Waiting data available... [2025-09-23 16:06:30.670] Starting syslogd/klogd: done [2025-09-23 16:06:30.686] DML Start [2025-09-23 16:06:30.862] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:06:31.280] DML res1: 0 [2025-09-23 16:06:31.532] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:06:31.532] Read Success [2025-09-23 16:06:31.532] Verifying certificate... [2025-09-23 16:06:31.788] Verified OK [2025-09-23 16:06:31.804] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:06:33.591] Verified OK [2025-09-23 16:06:33.591] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:06:34.163] Verified OK [2025-09-23 16:06:34.163] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:06:36.625] fs.protected_hardlinks = 1 [2025-09-23 16:06:36.625] fs.protected_symlinks = 1 [2025-09-23 16:06:36.640] kernel.modules_disabled = 1 [2025-09-23 16:06:36.832] [2025-09-23 16:06:36.832] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:06:38.089] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:06:45.877] SBL1:1210.0.1.0 [2025-09-23 16:06:45.925] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:06:47.492] SBL2:1210.0.1.0 [2025-09-23 16:06:47.540] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:06:47.651] j-A [2025-09-23 16:06:54.988] The R5 Autosar Classic is running [2025-09-23 16:06:55.019] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:06:55.019] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:06:55.627] INIT: version 2.96 booting [2025-09-23 16:06:55.723] INIT: Entering runlevel: 5 [2025-09-23 16:06:56.016] mtd28 attached [2025-09-23 16:06:56.016] mtd24 attached [2025-09-23 16:06:56.016] mtd32 attached [2025-09-23 16:06:56.016] ubi0:animations is mounted. [2025-09-23 16:06:56.016] RTNETLINK answers: File exists [2025-09-23 16:06:56.016] ubi1:textures is mounted. [2025-09-23 16:06:56.019] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:06:56.019] ubi2:dml_code is mounted. [2025-09-23 16:06:56.019] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:06:56.019] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:06:56.019] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:06:56.019] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:06:56.019] data.LB_FadeInType0=100 [2025-09-23 16:06:56.019] data.CHLH_FadeInType0=0 [2025-09-23 16:06:56.019] data.WU_FadeInDelay=0 [2025-09-23 16:06:56.019] max_time_out=0 [2025-09-23 16:06:56.019] No splash screen [2025-09-23 16:06:56.019] stop dss Done [2025-09-23 16:06:56.051] /dev/mem opened. [2025-09-23 16:06:56.077] Memory mapped at address 0xffff8d084000. [2025-09-23 16:06:56.077] Read at address 0x00600018 (0xffff8d084018): 0x00000000 [2025-09-23 16:06:56.077] Write at address 0x00600018 (0xffff8d084018): 0x00400040, readback 0x00400040 [2025-09-23 16:06:56.093] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:06:56.093] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:06:56.253] Loaded PowerVR consumer services. [2025-09-23 16:06:56.364] Waiting data available... [2025-09-23 16:06:56.396] 512+0 records in [2025-09-23 16:06:56.396] 512+0 records out [2025-09-23 16:06:56.413] Starting syslogd/klogd: done [2025-09-23 16:06:56.429] DML Start [2025-09-23 16:06:56.588] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:06:57.031] DML res1: 0 [2025-09-23 16:06:57.330] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:06:57.330] Read Success [2025-09-23 16:06:57.330] Verifying certificate... [2025-09-23 16:06:57.585] Verified OK [2025-09-23 16:06:57.602] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:06:59.377] Verified OK [2025-09-23 16:06:59.377] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:06:59.952] Verified OK [2025-09-23 16:06:59.952] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:07:02.430] fs.protected_hardlinks = 1 [2025-09-23 16:07:02.430] fs.protected_symlinks = 1 [2025-09-23 16:07:02.446] kernel.modules_disabled = 1 [2025-09-23 16:07:02.638] [2025-09-23 16:07:02.638] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:07:03.864] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:07:11.655] SBL1:1210.0.1.0 [2025-09-23 16:07:11.687] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:07:13.270] SBL2:1210.0.1.0 [2025-09-23 16:07:13.317] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:07:13.413] j-A [2025-09-23 16:07:20.766] The R5 Autosar Classic is running [2025-09-23 16:07:20.788] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:07:20.788] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:07:21.395] INIT: version 2.96 booting [2025-09-23 16:07:21.796] INIT: Entering runlevel: 5 [2025-09-23 16:07:21.796] mtd28 attached [2025-09-23 16:07:21.796] mtd32 attached [2025-09-23 16:07:21.796] mtd24 attached [2025-09-23 16:07:21.796] ubi0:animations is mounted. [2025-09-23 16:07:21.796] RTNETLINK answers: File exists [2025-09-23 16:07:21.796] ubi1:dml_code is mounted. [2025-09-23 16:07:21.796] ubi2:textures is mounted. [2025-09-23 16:07:21.796] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:07:21.796] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:07:21.796] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:07:21.796] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:07:21.796] data.LB_FadeInType0=100 [2025-09-23 16:07:21.796] data.CHLH_FadeInType0=0 [2025-09-23 16:07:21.796] data.WU_FadeInDelay=0 [2025-09-23 16:07:21.796] max_time_out=0 [2025-09-23 16:07:21.796] No splash screen [2025-09-23 16:07:21.796] stop dss Done [2025-09-23 16:07:21.796] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:07:21.868] /dev/mem opened. [2025-09-23 16:07:21.868] Memory mapped at address 0xffff94d42000. [2025-09-23 16:07:21.869] Read at address 0x00600018 (0xffff94d42018): 0x00000000 [2025-09-23 16:07:21.869] Write at address 0x00600018 (0xffff94d42018): 0x00400040, readback 0x00400040 [2025-09-23 16:07:21.869] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:07:21.869] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:07:21.965] Loaded PowerVR consumer services. [2025-09-23 16:07:22.125] Waiting data available... [2025-09-23 16:07:22.125] 512+0 records in [2025-09-23 16:07:22.125] 512+0 records out [2025-09-23 16:07:22.157] Starting syslogd/klogd: done [2025-09-23 16:07:22.173] DML Start [2025-09-23 16:07:22.349] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:07:22.812] DML res1: 0 [2025-09-23 16:07:23.004] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:07:23.025] Read Success [2025-09-23 16:07:23.025] Verifying certificate... [2025-09-23 16:07:23.297] Verified OK [2025-09-23 16:07:23.313] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:07:24.957] Verified OK [2025-09-23 16:07:24.957] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:07:25.592] Verified OK [2025-09-23 16:07:25.592] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:07:28.261] fs.protected_hardlinks = 1 [2025-09-23 16:07:28.261] fs.protected_symlinks = 1 [2025-09-23 16:07:28.277] kernel.modules_disabled = 1 [2025-09-23 16:07:28.485] [2025-09-23 16:07:28.485] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:07:29.681] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:07:37.419] SBL1:1210.0.1.0 [2025-09-23 16:07:37.467] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:07:39.033] SBL2:1210.0.1.0 [2025-09-23 16:07:39.081] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:07:39.177] j-A [2025-09-23 16:07:46.531] The R5 Autosar Classic is running [2025-09-23 16:07:46.554] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:07:46.554] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:07:47.162] INIT: version 2.96 booting [2025-09-23 16:07:47.274] INIT: Entering runlevel: 5 [2025-09-23 16:07:47.418] mtd24 attached [2025-09-23 16:07:47.449] mtd32 attached [2025-09-23 16:07:47.449] mtd28 attached [2025-09-23 16:07:47.605] ubi0:textures is mounted. [2025-09-23 16:07:47.605] RTNETLINK answers: File exists [2025-09-23 16:07:47.605] ubi1:dml_code is mounted. [2025-09-23 16:07:47.605] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:07:47.605] ubi2:animations is mounted. [2025-09-23 16:07:47.605] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:07:47.605] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:07:47.605] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:07:47.605] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:07:47.605] data.LB_FadeInType0=100 [2025-09-23 16:07:47.605] data.CHLH_FadeInType0=0 [2025-09-23 16:07:47.605] data.WU_FadeInDelay=0 [2025-09-23 16:07:47.605] max_time_out=0 [2025-09-23 16:07:47.605] No splash screen [2025-09-23 16:07:47.605] stop dss Done [2025-09-23 16:07:47.605] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:07:47.619] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:07:47.619] /dev/mem opened. [2025-09-23 16:07:47.619] Memory mapped at address 0xffff9d36d000. [2025-09-23 16:07:47.619] Read at address 0x00600018 (0xffff9d36d018): 0x00000000 [2025-09-23 16:07:47.619] Write at address 0x00600018 (0xffff9d36d018): 0x00400040, readback 0x00400040 [2025-09-23 16:07:47.731] Loaded PowerVR consumer services. [2025-09-23 16:07:47.907] Waiting data available... [2025-09-23 16:07:47.923] 512+0 records in [2025-09-23 16:07:47.939] 512+0 records out [2025-09-23 16:07:47.970] Starting syslogd/klogd: done [2025-09-23 16:07:47.987] DML Start [2025-09-23 16:07:48.194] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:07:48.466] DML res1: 0 [2025-09-23 16:07:48.817] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:07:48.833] Read Success [2025-09-23 16:07:48.833] Verifying certificate... [2025-09-23 16:07:49.090] Verified OK [2025-09-23 16:07:49.105] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:07:50.781] Verified OK [2025-09-23 16:07:50.782] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:07:51.374] Verified OK [2025-09-23 16:07:51.374] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:07:54.059] fs.protected_hardlinks = 1 [2025-09-23 16:07:54.059] fs.protected_symlinks = 1 [2025-09-23 16:07:54.074] kernel.modules_disabled = 1 [2025-09-23 16:07:54.282] [2025-09-23 16:07:54.282] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:07:55.420] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:08:03.176] SBL1:1210.0.1.0 [2025-09-23 16:08:03.224] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:08:04.791] SBL2:1210.0.1.0 [2025-09-23 16:08:04.839] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:08:04.934] j-A [2025-09-23 16:08:12.288] The R5 Autosar Classic is running [2025-09-23 16:08:12.311] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:08:12.311] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:08:12.919] INIT: version 2.96 booting [2025-09-23 16:08:13.031] INIT: Entering runlevel: 5 [2025-09-23 16:08:13.191] mtd24 attached [2025-09-23 16:08:13.207] mtd28 attached [2025-09-23 16:08:13.207] mtd32 attached [2025-09-23 16:08:13.255] ubi0:textures is mounted. [2025-09-23 16:08:13.346] RTNETLINK answers: File exists [2025-09-23 16:08:13.346] ubi1:animations is mounted. [2025-09-23 16:08:13.346] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:08:13.346] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:08:13.346] ubi2:dml_code is mounted. [2025-09-23 16:08:13.346] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:08:13.346] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:08:13.346] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:08:13.346] data.LB_FadeInType0=100 [2025-09-23 16:08:13.346] data.CHLH_FadeInType0=0 [2025-09-23 16:08:13.346] data.WU_FadeInDelay=0 [2025-09-23 16:08:13.346] max_time_out=0 [2025-09-23 16:08:13.346] No splash screen [2025-09-23 16:08:13.346] stop dss Done [2025-09-23 16:08:13.347] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:08:13.356] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:08:13.404] /dev/mem opened. [2025-09-23 16:08:13.404] Memory mapped at address 0xffffa530e000. [2025-09-23 16:08:13.404] Read at address 0x00600018 (0xffffa530e018): 0x00000000 [2025-09-23 16:08:13.404] Write at address 0x00600018 (0xffffa530e018): 0x00400040, readback 0x00400040 [2025-09-23 16:08:13.484] Loaded PowerVR consumer services. [2025-09-23 16:08:13.644] Waiting data available... [2025-09-23 16:08:13.676] 512+0 records in [2025-09-23 16:08:13.676] 512+0 records out [2025-09-23 16:08:13.692] Starting syslogd/klogd: done [2025-09-23 16:08:13.708] DML Start [2025-09-23 16:08:13.883] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:08:14.107] DML res1: 0 [2025-09-23 16:08:14.612] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:08:14.612] Read Success [2025-09-23 16:08:14.612] Verifying certificate... [2025-09-23 16:08:14.875] Verified OK [2025-09-23 16:08:14.875] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:08:16.578] Verified OK [2025-09-23 16:08:16.578] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:08:17.143] Verified OK [2025-09-23 16:08:17.143] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:08:19.684] fs.protected_hardlinks = 1 [2025-09-23 16:08:19.705] fs.protected_symlinks = 1 [2025-09-23 16:08:19.705] kernel.modules_disabled = 1 [2025-09-23 16:08:19.908] [2025-09-23 16:08:19.908] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:08:21.146] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:08:28.920] SBL1:1210.0.1.0 [2025-09-23 16:08:28.968] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:08:30.536] SBL2:1210.0.1.0 [2025-09-23 16:08:30.584] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:08:30.695] j-A [2025-09-23 16:08:38.085] The R5 Autosar Classic is running [2025-09-23 16:08:38.085] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:08:38.085] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:08:38.673] INIT: version 2.96 booting [2025-09-23 16:08:38.770] INIT: Entering runlevel: 5 [2025-09-23 16:08:38.929] mtd28 attached [2025-09-23 16:08:39.095] mtd24 attached [2025-09-23 16:08:39.096] mtd32 attached [2025-09-23 16:08:39.096] ubi0:animations is mounted. [2025-09-23 16:08:39.096] RTNETLINK answers: File exists [2025-09-23 16:08:39.096] ubi1:textures is mounted. [2025-09-23 16:08:39.096] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:08:39.096] ubi2:dml_code is mounted. [2025-09-23 16:08:39.096] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:08:39.096] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:08:39.096] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:08:39.096] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:08:39.096] data.LB_FadeInType0=100 [2025-09-23 16:08:39.096] data.CHLH_FadeInType0=0 [2025-09-23 16:08:39.096] data.WU_FadeInDelay=0 [2025-09-23 16:08:39.096] max_time_out=0 [2025-09-23 16:08:39.096] No splash screen [2025-09-23 16:08:39.096] stop dss Done [2025-09-23 16:08:39.133] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:08:39.133] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:08:39.133] /dev/mem opened. [2025-09-23 16:08:39.133] Memory mapped at address 0xffff9cd21000. [2025-09-23 16:08:39.133] Read at address 0x00600018 (0xffff9cd21018): 0x00000000 [2025-09-23 16:08:39.133] Write at address 0x00600018 (0xffff9cd21018): 0x00400040, readback 0x00400040 [2025-09-23 16:08:39.229] Loaded PowerVR consumer services. [2025-09-23 16:08:39.405] Waiting data available... [2025-09-23 16:08:39.421] 512+0 records in [2025-09-23 16:08:39.421] 512+0 records out [2025-09-23 16:08:39.469] Starting syslogd/klogd: done [2025-09-23 16:08:39.485] DML Start [2025-09-23 16:08:39.660] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:08:39.852] DML res1: 0 [2025-09-23 16:08:40.346] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:08:40.346] Read Success [2025-09-23 16:08:40.346] Verifying certificate... [2025-09-23 16:08:40.586] Verified OK [2025-09-23 16:08:40.602] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:08:42.261] Verified OK [2025-09-23 16:08:42.261] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:08:42.804] Verified OK [2025-09-23 16:08:42.821] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:08:45.363] fs.protected_hardlinks = 1 [2025-09-23 16:08:45.378] fs.protected_symlinks = 1 [2025-09-23 16:08:45.394] kernel.modules_disabled = 1 [2025-09-23 16:08:45.571] [2025-09-23 16:08:45.571] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:08:46.882] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:08:54.706] SBL1:1210.0.1.0 [2025-09-23 16:08:54.754] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:08:56.321] SBL2:1210.0.1.0 [2025-09-23 16:08:56.369] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:08:56.466] j-A [2025-09-23 16:09:03.819] The R5 Autosar Classic is running [2025-09-23 16:09:03.843] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:09:03.843] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:09:04.451] INIT: version 2.96 booting [2025-09-23 16:09:04.563] INIT: Entering runlevel: 5 [2025-09-23 16:09:04.723] mtd24 attached [2025-09-23 16:09:04.723] mtd28 attached [2025-09-23 16:09:04.754] mtd32 attached [2025-09-23 16:09:04.878] RTNETLINK answers: File exists [2025-09-23 16:09:04.878] ubi0:textures is mounted. [2025-09-23 16:09:04.878] ubi1:animations is mounted. [2025-09-23 16:09:04.878] ubi2:dml_code is mounted. [2025-09-23 16:09:04.878] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:09:04.878] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:09:04.878] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:09:04.878] data.LB_FadeInType0=100 [2025-09-23 16:09:04.878] data.CHLH_FadeInType0=0 [2025-09-23 16:09:04.878] data.WU_FadeInDelay=0 [2025-09-23 16:09:04.878] max_time_out=0 [2025-09-23 16:09:04.878] No splash screen [2025-09-23 16:09:04.878] stop dss Done [2025-09-23 16:09:04.878] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:09:04.878] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:09:04.924] /dev/mem opened. [2025-09-23 16:09:04.924] Memory mapped at address 0xffff8247c000. [2025-09-23 16:09:04.924] Read at address 0x00600018 (0xffff8247c018): 0x00000000 [2025-09-23 16:09:04.924] Write at address 0x00600018 (0xffff8247c018): 0x00400040, readback 0x00400040 [2025-09-23 16:09:04.954] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:09:04.954] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:09:05.193] Loaded PowerVR consumer services. [2025-09-23 16:09:05.209] Waiting data available... [2025-09-23 16:09:05.241] 512+0 records in [2025-09-23 16:09:05.241] 512+0 records out [2025-09-23 16:09:05.290] Starting syslogd/klogd: done [2025-09-23 16:09:05.290] DML Start [2025-09-23 16:09:05.465] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:09:05.892] DML res1: 0 [2025-09-23 16:09:06.191] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:09:06.191] Read Success [2025-09-23 16:09:06.191] Verifying certificate... [2025-09-23 16:09:06.463] Verified OK [2025-09-23 16:09:06.479] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:09:08.204] Verified OK [2025-09-23 16:09:08.204] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:09:08.837] Verified OK [2025-09-23 16:09:08.837] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:09:11.410] fs.protected_hardlinks = 1 [2025-09-23 16:09:11.410] fs.protected_symlinks = 1 [2025-09-23 16:09:11.410] kernel.modules_disabled = 1 [2025-09-23 16:09:11.602] [2025-09-23 16:09:11.602] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:09:12.705] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:09:20.469] SBL1:1210.0.1.0 [2025-09-23 16:09:20.500] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:09:22.083] SBL2:1210.0.1.0 [2025-09-23 16:09:22.131] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:09:22.227] j-A [2025-09-23 16:09:29.582] The R5 Autosar Classic is running [2025-09-23 16:09:29.604] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:09:29.604] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:09:30.211] INIT: version 2.96 booting [2025-09-23 16:09:30.626] INIT: Entering runlevel: 5 [2025-09-23 16:09:30.626] mtd28 attached [2025-09-23 16:09:30.626] mtd24 attached [2025-09-23 16:09:30.626] ubi0:animations is mounted. [2025-09-23 16:09:30.626] mtd32 attached [2025-09-23 16:09:30.626] RTNETLINK answers: File exists [2025-09-23 16:09:30.626] ubi1:textures is mounted. [2025-09-23 16:09:30.626] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:09:30.626] ubi2:dml_code is mounted. [2025-09-23 16:09:30.626] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:09:30.626] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:09:30.626] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:09:30.626] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:09:30.626] data.LB_FadeInType0=100 [2025-09-23 16:09:30.626] data.CHLH_FadeInType0=0 [2025-09-23 16:09:30.626] data.WU_FadeInDelay=0 [2025-09-23 16:09:30.626] max_time_out=0 [2025-09-23 16:09:30.626] No splash screen [2025-09-23 16:09:30.626] stop dss Done [2025-09-23 16:09:30.651] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:09:30.687] /dev/mem opened. [2025-09-23 16:09:30.687] Memory mapped at address 0xffff9f5a9000. [2025-09-23 16:09:30.687] Read at address 0x00600018 (0xffff9f5a9018): 0x00000000 [2025-09-23 16:09:30.687] Write at address 0x00600018 (0xffff9f5a9018): 0x00400040, readback 0x00400040 [2025-09-23 16:09:30.687] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:09:30.958] Loaded PowerVR consumer services. [2025-09-23 16:09:30.974] Waiting data available... [2025-09-23 16:09:30.990] 512+0 records in [2025-09-23 16:09:31.006] 512+0 records out [2025-09-23 16:09:31.022] Starting syslogd/klogd: done [2025-09-23 16:09:31.038] DML Start [2025-09-23 16:09:31.214] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:09:31.626] DML res1: 0 [2025-09-23 16:09:31.896] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:09:31.896] Read Success [2025-09-23 16:09:31.896] Verifying certificate... [2025-09-23 16:09:32.200] Verified OK [2025-09-23 16:09:32.216] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:09:33.793] Verified OK [2025-09-23 16:09:33.793] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:09:34.429] Verified OK [2025-09-23 16:09:34.429] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:09:37.002] fs.protected_hardlinks = 1 [2025-09-23 16:09:37.002] fs.protected_symlinks = 1 [2025-09-23 16:09:37.018] kernel.modules_disabled = 1 [2025-09-23 16:09:37.210] [2025-09-23 16:09:37.210] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:09:38.499] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:09:46.226] SBL1:1210.0.1.0 [2025-09-23 16:09:46.257] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:09:47.840] SBL2:1210.0.1.0 [2025-09-23 16:09:47.888] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:09:47.983] j-A [2025-09-23 16:09:55.338] The R5 Autosar Classic is running [2025-09-23 16:09:55.359] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:09:55.359] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:09:55.967] INIT: version 2.96 booting [2025-09-23 16:09:56.376] INIT: Entering runlevel: 5 [2025-09-23 16:09:56.376] mtd28 attached [2025-09-23 16:09:56.376] mtd24 attached [2025-09-23 16:09:56.376] mtd32 attached [2025-09-23 16:09:56.376] ubi0:animations is mounted. [2025-09-23 16:09:56.376] RTNETLINK answers: File exists [2025-09-23 16:09:56.376] ubi1:textures is mounted. [2025-09-23 16:09:56.376] ubi2:dml_code is mounted. [2025-09-23 16:09:56.376] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:09:56.376] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:09:56.376] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:09:56.376] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:09:56.376] data.LB_FadeInType0=100 [2025-09-23 16:09:56.376] data.CHLH_FadeInType0=0 [2025-09-23 16:09:56.376] data.WU_FadeInDelay=0 [2025-09-23 16:09:56.376] max_time_out=0 [2025-09-23 16:09:56.376] No splash screen [2025-09-23 16:09:56.376] stop dss Done [2025-09-23 16:09:56.376] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:09:56.438] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:09:56.438] /dev/mem opened. [2025-09-23 16:09:56.438] Memory mapped at address 0xffff81cb7000. [2025-09-23 16:09:56.438] Read at address 0x00600018 (0xffff81cb7018): 0x00000000 [2025-09-23 16:09:56.438] Write at address 0x00600018 (0xffff81cb7018): 0x00400040, readback 0x00400040 [2025-09-23 16:09:56.438] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:09:56.678] Loaded PowerVR consumer services. [2025-09-23 16:09:56.742] Waiting data available... [2025-09-23 16:09:56.758] 512+0 records in [2025-09-23 16:09:56.758] 512+0 records out [2025-09-23 16:09:56.790] Starting syslogd/klogd: done [2025-09-23 16:09:56.806] DML Start [2025-09-23 16:09:56.950] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:09:57.157] DML res1: 0 [2025-09-23 16:09:57.605] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:09:57.626] Read Success [2025-09-23 16:09:57.626] Verifying certificate... [2025-09-23 16:09:57.866] Verified OK [2025-09-23 16:09:57.898] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:09:59.627] Verified OK [2025-09-23 16:09:59.627] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:10:00.168] Verified OK [2025-09-23 16:10:00.168] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:10:02.661] fs.protected_hardlinks = 1 [2025-09-23 16:10:02.695] fs.protected_symlinks = 1 [2025-09-23 16:10:02.695] kernel.modules_disabled = 1 [2025-09-23 16:10:02.869] [2025-09-23 16:10:02.869] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:10:04.253] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:10:12.000] SBL1:1210.0.1.0 [2025-09-23 16:10:12.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:10:13.615] SBL2:1210.0.1.0 [2025-09-23 16:10:13.663] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:10:13.759] j-A [2025-09-23 16:10:21.113] The R5 Autosar Classic is running [2025-09-23 16:10:21.113] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:10:21.134] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:10:21.742] INIT: version 2.96 booting [2025-09-23 16:10:22.142] INIT: Entering runlevel: 5 [2025-09-23 16:10:22.142] mtd28 attached [2025-09-23 16:10:22.142] mtd24 attached [2025-09-23 16:10:22.142] mtd32 attached [2025-09-23 16:10:22.142] ubi0:animations is mounted. [2025-09-23 16:10:22.142] RTNETLINK answers: File exists [2025-09-23 16:10:22.142] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:10:22.142] ubi1:textures is mounted. [2025-09-23 16:10:22.142] ubi2:dml_code is mounted. [2025-09-23 16:10:22.142] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:10:22.142] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:10:22.142] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:10:22.143] data.LB_FadeInType0=100 [2025-09-23 16:10:22.143] data.CHLH_FadeInType0=0 [2025-09-23 16:10:22.143] data.WU_FadeInDelay=0 [2025-09-23 16:10:22.143] max_time_out=0 [2025-09-23 16:10:22.143] No splash screen [2025-09-23 16:10:22.143] stop dss Done [2025-09-23 16:10:22.143] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:10:22.201] /dev/mem opened. [2025-09-23 16:10:22.201] Memory mapped at address 0xffff9a356000. [2025-09-23 16:10:22.201] Read at address 0x00600018 (0xffff9a356018): 0x00000000 [2025-09-23 16:10:22.201] Write at address 0x00600018 (0xffff9a356018): 0x00400040, readback 0x00400040 [2025-09-23 16:10:22.201] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:10:22.217] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:10:22.361] Loaded PowerVR consumer services. [2025-09-23 16:10:22.504] Waiting data available... [2025-09-23 16:10:22.520] 512+0 records in [2025-09-23 16:10:22.520] 512+0 records out [2025-09-23 16:10:22.536] Starting syslogd/klogd: done [2025-09-23 16:10:22.552] DML Start [2025-09-23 16:10:22.713] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:10:22.936] DML res1: 0 [2025-09-23 16:10:23.406] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:10:23.406] Read Success [2025-09-23 16:10:23.406] Verifying certificate... [2025-09-23 16:10:23.688] Verified OK [2025-09-23 16:10:23.688] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:10:25.266] Verified OK [2025-09-23 16:10:25.266] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:10:25.896] Verified OK [2025-09-23 16:10:25.896] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:10:28.597] fs.protected_hardlinks = 1 [2025-09-23 16:10:28.597] fs.protected_symlinks = 1 [2025-09-23 16:10:28.631] kernel.modules_disabled = 1 [2025-09-23 16:10:28.805] [2025-09-23 16:10:28.805] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:10:29.978] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:10:37.725] SBL1:1210.0.1.0 [2025-09-23 16:10:37.773] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:10:39.340] SBL2:1210.0.1.0 [2025-09-23 16:10:39.388] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:10:39.499] j-A [2025-09-23 16:10:46.838] The R5 Autosar Classic is running [2025-09-23 16:10:46.869] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:10:46.869] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:10:47.476] INIT: version 2.96 booting [2025-09-23 16:10:47.588] INIT: Entering runlevel: 5 [2025-09-23 16:10:47.876] mtd28 attached [2025-09-23 16:10:47.876] mtd24 attached [2025-09-23 16:10:47.876] mtd32 attached [2025-09-23 16:10:47.876] RTNETLINK answers: File exists [2025-09-23 16:10:47.876] ubi0:animations is mounted. [2025-09-23 16:10:47.876] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:10:47.876] ubi2:dml_code is mounted. [2025-09-23 16:10:47.876] ubi1:textures is mounted. [2025-09-23 16:10:47.876] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:10:47.876] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:10:47.876] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:10:47.876] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:10:47.882] data.LB_FadeInType0=100 [2025-09-23 16:10:47.882] data.CHLH_FadeInType0=0 [2025-09-23 16:10:47.882] data.WU_FadeInDelay=0 [2025-09-23 16:10:47.882] max_time_out=0 [2025-09-23 16:10:47.882] No splash screen [2025-09-23 16:10:47.882] stop dss Done [2025-09-23 16:10:47.978] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:10:47.978] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:10:47.978] /dev/mem opened. [2025-09-23 16:10:47.978] Memory mapped at address 0xffffa82ae000. [2025-09-23 16:10:47.978] Read at address 0x00600018 (0xffffa82ae018): 0x00000000 [2025-09-23 16:10:47.978] Write at address 0x00600018 (0xffffa82ae018): 0x00400040, readback 0x00400040 [2025-09-23 16:10:48.201] Loaded PowerVR consumer services. [2025-09-23 16:10:48.259] Waiting data available... [2025-09-23 16:10:48.259] 512+0 records in [2025-09-23 16:10:48.259] 512+0 records out [2025-09-23 16:10:48.292] Starting syslogd/klogd: done [2025-09-23 16:10:48.308] DML Start [2025-09-23 16:10:48.467] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:10:48.659] DML res1: 0 [2025-09-23 16:10:49.179] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:10:49.179] Read Success [2025-09-23 16:10:49.179] Verifying certificate... [2025-09-23 16:10:49.402] Verified OK [2025-09-23 16:10:49.418] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:10:51.177] Verified OK [2025-09-23 16:10:51.207] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:10:51.784] Verified OK [2025-09-23 16:10:51.784] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:10:54.326] fs.protected_hardlinks = 1 [2025-09-23 16:10:54.326] fs.protected_symlinks = 1 [2025-09-23 16:10:54.360] kernel.modules_disabled = 1 [2025-09-23 16:10:54.549] [2025-09-23 16:10:54.549] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:10:55.741] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:11:03.505] SBL1:1210.0.1.0 [2025-09-23 16:11:03.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:11:05.120] SBL2:1210.0.1.0 [2025-09-23 16:11:05.152] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:11:05.264] j-A [2025-09-23 16:11:12.639] The R5 Autosar Classic is running [2025-09-23 16:11:12.639] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:11:12.639] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:11:13.246] INIT: version 2.96 booting [2025-09-23 16:11:13.358] INIT: Entering runlevel: 5 [2025-09-23 16:11:13.673] mtd24 attached [2025-09-23 16:11:13.673] mtd28 attached [2025-09-23 16:11:13.673] mtd32 attached [2025-09-23 16:11:13.673] ubi0:textures is mounted. [2025-09-23 16:11:13.673] ubi1:animations is mounted. [2025-09-23 16:11:13.673] RTNETLINK answers: File exists [2025-09-23 16:11:13.673] ubi2:dml_code is mounted. [2025-09-23 16:11:13.673] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:11:13.673] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:11:13.673] data.LB_FadeInType0=100 [2025-09-23 16:11:13.673] data.CHLH_FadeInType0=0 [2025-09-23 16:11:13.673] data.WU_FadeInDelay=0 [2025-09-23 16:11:13.673] max_time_out=0 [2025-09-23 16:11:13.673] No splash screen [2025-09-23 16:11:13.673] stop dss Done [2025-09-23 16:11:13.673] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:11:13.673] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:11:13.673] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:11:13.721] /dev/mem opened. [2025-09-23 16:11:13.721] Memory mapped at address 0xffffbdb46000. [2025-09-23 16:11:13.721] Read at address 0x00600018 (0xffffbdb46018): 0x00000000 [2025-09-23 16:11:13.721] Write at address 0x00600018 (0xffffbdb46018): 0x00400040, readback 0x00400040 [2025-09-23 16:11:13.737] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:11:13.760] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:11:13.855] Loaded PowerVR consumer services. [2025-09-23 16:11:13.984] Waiting data available... [2025-09-23 16:11:14.000] 512+0 records in [2025-09-23 16:11:14.000] 512+0 records out [2025-09-23 16:11:14.032] Starting syslogd/klogd: done [2025-09-23 16:11:14.047] DML Start [2025-09-23 16:11:14.240] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:11:14.447] DML res1: 0 [2025-09-23 16:11:14.901] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:11:14.901] Read Success [2025-09-23 16:11:14.901] Verifying certificate... [2025-09-23 16:11:15.220] Verified OK [2025-09-23 16:11:15.220] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:11:16.686] Verified OK [2025-09-23 16:11:16.686] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:11:17.310] Verified OK [2025-09-23 16:11:17.310] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:11:20.190] fs.protected_hardlinks = 1 [2025-09-23 16:11:20.190] fs.protected_symlinks = 1 [2025-09-23 16:11:20.191] kernel.modules_disabled = 1 [2025-09-23 16:11:20.379] [2025-09-23 16:11:20.379] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:11:21.549] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:11:29.259] SBL1:1210.0.1.0 [2025-09-23 16:11:29.307] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:11:30.890] SBL2:1210.0.1.0 [2025-09-23 16:11:30.925] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:11:31.033] j-A [2025-09-23 16:11:38.406] The R5 Autosar Classic is running [2025-09-23 16:11:38.406] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:11:38.406] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:11:39.014] INIT: version 2.96 booting [2025-09-23 16:11:39.125] INIT: Entering runlevel: 5 [2025-09-23 16:11:39.471] mtd24 attached [2025-09-23 16:11:39.471] mtd32 attached [2025-09-23 16:11:39.471] mtd28 attached [2025-09-23 16:11:39.471] ubi0:textures is mounted. [2025-09-23 16:11:39.471] ubi1:dml_code is mounted. [2025-09-23 16:11:39.471] RTNETLINK answers: File exists [2025-09-23 16:11:39.471] ubi2:animations is mounted. [2025-09-23 16:11:39.471] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:11:39.471] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:11:39.471] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:11:39.471] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:11:39.471] data.LB_FadeInType0=100 [2025-09-23 16:11:39.471] data.CHLH_FadeInType0=0 [2025-09-23 16:11:39.471] data.WU_FadeInDelay=0 [2025-09-23 16:11:39.471] max_time_out=0 [2025-09-23 16:11:39.471] No splash screen [2025-09-23 16:11:39.471] stop dss Done [2025-09-23 16:11:39.471] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:11:39.471] /dev/mem opened. [2025-09-23 16:11:39.471] Memory mapped at address 0xffffa27ef000. [2025-09-23 16:11:39.471] Read at address 0x00600018 (0xffffa27ef018): 0x00000000 [2025-09-23 16:11:39.471] Write at address 0x00600018 (0xffffa27ef018): 0x00400040, readback 0x00400040 [2025-09-23 16:11:39.471] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:11:39.487] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:11:39.567] Loaded PowerVR consumer services. [2025-09-23 16:11:39.743] Waiting data available... [2025-09-23 16:11:39.775] 512+0 records in [2025-09-23 16:11:39.775] 512+0 records out [2025-09-23 16:11:39.807] Starting syslogd/klogd: done [2025-09-23 16:11:39.823] DML Start [2025-09-23 16:11:39.999] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:11:40.470] DML res1: 0 [2025-09-23 16:11:40.663] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:11:40.663] Read Success [2025-09-23 16:11:40.663] Verifying certificate... [2025-09-23 16:11:40.903] Verified OK [2025-09-23 16:11:40.919] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:11:42.597] Verified OK [2025-09-23 16:11:42.597] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:11:43.156] Verified OK [2025-09-23 16:11:43.156] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:11:45.666] fs.protected_hardlinks = 1 [2025-09-23 16:11:45.682] fs.protected_symlinks = 1 [2025-09-23 16:11:45.682] kernel.modules_disabled = 1 [2025-09-23 16:11:45.873] [2025-09-23 16:11:45.873] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:11:47.275] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:11:55.029] SBL1:1210.0.1.0 [2025-09-23 16:11:55.061] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:11:56.644] SBL2:1210.0.1.0 [2025-09-23 16:11:56.676] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:11:56.788] j-A [2025-09-23 16:12:04.163] The R5 Autosar Classic is running [2025-09-23 16:12:04.163] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:12:04.163] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:12:04.771] INIT: version 2.96 booting [2025-09-23 16:12:04.882] INIT: Entering runlevel: 5 [2025-09-23 16:12:05.189] mtd28 attached [2025-09-23 16:12:05.189] mtd24 attached [2025-09-23 16:12:05.189] mtd32 attached [2025-09-23 16:12:05.189] RTNETLINK answers: File exists [2025-09-23 16:12:05.189] ubi0:animations is mounted. [2025-09-23 16:12:05.189] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:12:05.189] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:12:05.189] ubi2:dml_code is mounted. [2025-09-23 16:12:05.189] ubi1:textures is mounted. [2025-09-23 16:12:05.189] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:12:05.189] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:12:05.189] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:12:05.189] data.LB_FadeInType0=100 [2025-09-23 16:12:05.189] data.CHLH_FadeInType0=0 [2025-09-23 16:12:05.189] data.WU_FadeInDelay=0 [2025-09-23 16:12:05.189] max_time_out=0 [2025-09-23 16:12:05.189] No splash screen [2025-09-23 16:12:05.189] stop dss Done [2025-09-23 16:12:05.203] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:12:05.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:12:05.219] /dev/mem opened. [2025-09-23 16:12:05.219] Memory mapped at address 0xffffbda50000. [2025-09-23 16:12:05.244] Read at address 0x00600018 (0xffffbda50018): 0x00000000 [2025-09-23 16:12:05.244] Write at address 0x00600018 (0xffffbda50018): 0x00400040, readback 0x00400040 [2025-09-23 16:12:05.515] Loaded PowerVR consumer services. [2025-09-23 16:12:05.515] Waiting data available... [2025-09-23 16:12:05.547] 512+0 records in [2025-09-23 16:12:05.547] 512+0 records out [2025-09-23 16:12:05.579] Starting syslogd/klogd: done [2025-09-23 16:12:05.595] DML Start [2025-09-23 16:12:05.771] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:12:06.011] DML res1: 0 [2025-09-23 16:12:06.441] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:12:06.441] Read Success [2025-09-23 16:12:06.441] Verifying certificate... [2025-09-23 16:12:06.729] Verified OK [2025-09-23 16:12:06.761] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:12:08.456] Verified OK [2025-09-23 16:12:08.456] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:12:09.032] Verified OK [2025-09-23 16:12:09.032] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:12:11.576] fs.protected_hardlinks = 1 [2025-09-23 16:12:11.577] fs.protected_symlinks = 1 [2025-09-23 16:12:11.590] kernel.modules_disabled = 1 [2025-09-23 16:12:11.782] [2025-09-23 16:12:11.782] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:12:13.016] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:12:20.783] SBL1:1210.0.1.0 [2025-09-23 16:12:20.815] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:12:22.397] SBL2:1210.0.1.0 [2025-09-23 16:12:22.428] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:12:22.540] j-A [2025-09-23 16:12:29.914] The R5 Autosar Classic is running [2025-09-23 16:12:29.914] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:12:29.914] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:12:30.521] INIT: version 2.96 booting [2025-09-23 16:12:30.634] INIT: Entering runlevel: 5 [2025-09-23 16:12:30.954] mtd32 attached [2025-09-23 16:12:30.955] mtd24 attached [2025-09-23 16:12:30.955] mtd28 attached [2025-09-23 16:12:30.955] ubi0:dml_code is mounted. [2025-09-23 16:12:30.955] ubi1:textures is mounted. [2025-09-23 16:12:30.955] RTNETLINK answers: File exists [2025-09-23 16:12:30.955] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:12:30.955] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:12:30.955] ubi2:animations is mounted. [2025-09-23 16:12:30.955] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:12:30.955] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:12:30.955] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:12:30.955] data.LB_FadeInType0=100 [2025-09-23 16:12:30.955] data.CHLH_FadeInType0=0 [2025-09-23 16:12:30.955] data.WU_FadeInDelay=0 [2025-09-23 16:12:30.955] max_time_out=0 [2025-09-23 16:12:30.955] No splash screen [2025-09-23 16:12:30.955] stop dss Done [2025-09-23 16:12:30.955] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:12:30.955] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:12:30.993] /dev/mem opened. [2025-09-23 16:12:30.993] Memory mapped at address 0xffff8c9f7000. [2025-09-23 16:12:30.993] Read at address 0x00600018 (0xffff8c9f7018): 0x00000000 [2025-09-23 16:12:30.993] Write at address 0x00600018 (0xffff8c9f7018): 0x00400040, readback 0x00400040 [2025-09-23 16:12:31.121] Loaded PowerVR consumer services. [2025-09-23 16:12:31.281] Waiting data available... [2025-09-23 16:12:31.297] 512+0 records in [2025-09-23 16:12:31.297] 512+0 records out [2025-09-23 16:12:31.344] Starting syslogd/klogd: done [2025-09-23 16:12:31.360] DML Start [2025-09-23 16:12:31.506] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:12:31.745] DML res1: 0 [2025-09-23 16:12:32.268] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:12:32.268] Read Success [2025-09-23 16:12:32.268] Verifying certificate... [2025-09-23 16:12:32.476] Verified OK [2025-09-23 16:12:32.508] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:12:34.181] Verified OK [2025-09-23 16:12:34.181] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:12:34.691] Verified OK [2025-09-23 16:12:34.691] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:12:37.313] fs.protected_hardlinks = 1 [2025-09-23 16:12:37.313] fs.protected_symlinks = 1 [2025-09-23 16:12:37.332] kernel.modules_disabled = 1 [2025-09-23 16:12:37.521] [2025-09-23 16:12:37.521] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:12:38.784] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:12:46.544] SBL1:1210.0.1.0 [2025-09-23 16:12:46.575] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:12:48.158] SBL2:1210.0.1.0 [2025-09-23 16:12:48.207] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:12:48.302] j-A [2025-09-23 16:12:55.655] The R5 Autosar Classic is running [2025-09-23 16:12:55.655] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:12:55.676] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:12:56.284] INIT: version 2.96 booting [2025-09-23 16:12:56.395] INIT: Entering runlevel: 5 [2025-09-23 16:12:56.540] mtd28 attached [2025-09-23 16:12:56.556] mtd24 attached [2025-09-23 16:12:56.571] mtd32 attached [2025-09-23 16:12:56.678] ubi0:animations is mounted. [2025-09-23 16:12:56.679] RTNETLINK answers: File exists [2025-09-23 16:12:56.679] ubi1:textures is mounted. [2025-09-23 16:12:56.679] ubi2:dml_code is mounted. [2025-09-23 16:12:56.679] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:12:56.679] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:12:56.679] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:12:56.679] data.LB_FadeInType0=100 [2025-09-23 16:12:56.679] data.CHLH_FadeInType0=0 [2025-09-23 16:12:56.679] data.WU_FadeInDelay=0 [2025-09-23 16:12:56.679] max_time_out=0 [2025-09-23 16:12:56.679] No splash screen [2025-09-23 16:12:56.679] stop dss Done [2025-09-23 16:12:56.679] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:12:56.679] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:12:56.764] /dev/mem opened. [2025-09-23 16:12:56.764] Memory mapped at address 0xffff855b6000. [2025-09-23 16:12:56.764] Read at address 0x00600018 (0xffff855b6018): 0x00000000 [2025-09-23 16:12:56.764] Write at address 0x00600018 (0xffff855b6018): 0x00400040, readback 0x00400040 [2025-09-23 16:12:56.796] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:12:56.812] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:12:57.003] Loaded PowerVR consumer services. [2025-09-23 16:12:57.065] 512+0 records in [2025-09-23 16:12:57.065] 512+0 records out [2025-09-23 16:12:57.065] Waiting data available... [2025-09-23 16:12:57.097] Starting syslogd/klogd: done [2025-09-23 16:12:57.113] DML Start [2025-09-23 16:12:57.289] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:12:57.513] DML res1: 0 [2025-09-23 16:12:57.917] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:12:57.917] Read Success [2025-09-23 16:12:57.917] Verifying certificate... [2025-09-23 16:12:58.221] Verified OK [2025-09-23 16:12:58.221] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:12:59.852] Verified OK [2025-09-23 16:12:59.852] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:13:00.491] Verified OK [2025-09-23 16:13:00.491] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:13:03.098] fs.protected_hardlinks = 1 [2025-09-23 16:13:03.098] fs.protected_symlinks = 1 [2025-09-23 16:13:03.114] kernel.modules_disabled = 1 [2025-09-23 16:13:03.305] [2025-09-23 16:13:03.305] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:13:04.538] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:13:12.297] SBL1:1210.0.1.0 [2025-09-23 16:13:12.345] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:13:13.912] SBL2:1210.0.1.0 [2025-09-23 16:13:13.960] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:13:14.072] j-A [2025-09-23 16:13:21.441] The R5 Autosar Classic is running [2025-09-23 16:13:21.441] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:13:21.441] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:13:22.048] INIT: version 2.96 booting [2025-09-23 16:13:22.160] INIT: Entering runlevel: 5 [2025-09-23 16:13:22.488] mtd28 attached [2025-09-23 16:13:22.488] mtd24 attached [2025-09-23 16:13:22.488] mtd32 attached [2025-09-23 16:13:22.488] ubi0:animations is mounted. [2025-09-23 16:13:22.488] ubi1:textures is mounted. [2025-09-23 16:13:22.488] RTNETLINK answers: File exists [2025-09-23 16:13:22.488] ubi2:dml_code is mounted. [2025-09-23 16:13:22.488] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:13:22.488] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:13:22.488] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:13:22.488] data.LB_FadeInType0=100 [2025-09-23 16:13:22.488] data.CHLH_FadeInType0=0 [2025-09-23 16:13:22.488] data.WU_FadeInDelay=0 [2025-09-23 16:13:22.488] max_time_out=0 [2025-09-23 16:13:22.488] No splash screen [2025-09-23 16:13:22.488] stop dss Done [2025-09-23 16:13:22.488] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:13:22.488] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:13:22.509] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:13:22.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:13:22.509] /dev/mem opened. [2025-09-23 16:13:22.509] Memory mapped at address 0xffffa7d2f000. [2025-09-23 16:13:22.509] Read at address 0x00600018 (0xffffa7d2f018): 0x00000000 [2025-09-23 16:13:22.509] Write at address 0x00600018 (0xffffa7d2f018): 0x00400040, readback 0x00400040 [2025-09-23 16:13:22.622] Loaded PowerVR consumer services. [2025-09-23 16:13:22.782] Waiting data available... [2025-09-23 16:13:22.798] 512+0 records in [2025-09-23 16:13:22.798] 512+0 records out [2025-09-23 16:13:22.845] Starting syslogd/klogd: done [2025-09-23 16:13:22.861] DML Start [2025-09-23 16:13:23.101] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:13:23.502] DML res1: 0 [2025-09-23 16:13:23.682] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:13:23.682] Read Success [2025-09-23 16:13:23.682] Verifying certificate... [2025-09-23 16:13:23.921] Verified OK [2025-09-23 16:13:23.938] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:13:25.629] Verified OK [2025-09-23 16:13:25.629] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:13:26.234] Verified OK [2025-09-23 16:13:26.234] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:13:28.760] fs.protected_hardlinks = 1 [2025-09-23 16:13:28.775] fs.protected_symlinks = 1 [2025-09-23 16:13:28.776] kernel.modules_disabled = 1 [2025-09-23 16:13:28.968] [2025-09-23 16:13:28.968] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:13:30.388] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:13:38.059] SBL1:1210.0.1.0 [2025-09-23 16:13:38.107] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:13:39.674] SBL2:1210.0.1.0 [2025-09-23 16:13:39.721] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:13:39.833] j-A [2025-09-23 16:13:47.202] The R5 Autosar Classic is running [2025-09-23 16:13:47.202] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:13:47.202] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:13:47.810] INIT: version 2.96 booting [2025-09-23 16:13:47.922] INIT: Entering runlevel: 5 [2025-09-23 16:13:48.237] mtd24 attached [2025-09-23 16:13:48.237] mtd28 attached [2025-09-23 16:13:48.237] mtd32 attached [2025-09-23 16:13:48.237] ubi0:textures is mounted. [2025-09-23 16:13:48.237] RTNETLINK answers: File exists [2025-09-23 16:13:48.237] ubi2:dml_code is mounted. [2025-09-23 16:13:48.237] ubi1:animations is mounted. [2025-09-23 16:13:48.237] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:13:48.237] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:13:48.237] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:13:48.237] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:13:48.238] data.LB_FadeInType0=100 [2025-09-23 16:13:48.238] data.CHLH_FadeInType0=0 [2025-09-23 16:13:48.238] data.WU_FadeInDelay=0 [2025-09-23 16:13:48.238] max_time_out=0 [2025-09-23 16:13:48.238] No splash screen [2025-09-23 16:13:48.238] stop dss Done [2025-09-23 16:13:48.238] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:13:48.239] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:13:48.273] /dev/mem opened. [2025-09-23 16:13:48.273] Memory mapped at address 0xffff803c5000. [2025-09-23 16:13:48.273] Read at address 0x00600018 (0xffff803c5018): 0x00000000 [2025-09-23 16:13:48.273] Write at address 0x00600018 (0xffff803c5018): 0x00400040, readback 0x00400040 [2025-09-23 16:13:48.273] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:13:48.496] Loaded PowerVR consumer services. [2025-09-23 16:13:48.561] Waiting data available... [2025-09-23 16:13:48.609] 512+0 records in [2025-09-23 16:13:48.609] 512+0 records out [2025-09-23 16:13:48.624] Starting syslogd/klogd: done [2025-09-23 16:13:48.640] DML Start [2025-09-23 16:13:48.832] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:13:49.253] DML res1: 0 [2025-09-23 16:13:49.501] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:13:49.501] Read Success [2025-09-23 16:13:49.501] Verifying certificate... [2025-09-23 16:13:49.790] Verified OK [2025-09-23 16:13:49.806] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:13:51.478] Verified OK [2025-09-23 16:13:51.478] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:13:52.092] Verified OK [2025-09-23 16:13:52.092] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:13:54.634] fs.protected_hardlinks = 1 [2025-09-23 16:13:54.650] fs.protected_symlinks = 1 [2025-09-23 16:13:54.650] kernel.modules_disabled = 1 [2025-09-23 16:13:54.858] [2025-09-23 16:13:54.858] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:13:56.152] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:14:03.821] SBL1:1210.0.1.0 [2025-09-23 16:14:03.853] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:14:05.436] SBL2:1210.0.1.0 [2025-09-23 16:14:05.483] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:14:05.580] j-A [2025-09-23 16:14:12.932] The R5 Autosar Classic is running [2025-09-23 16:14:12.955] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:14:12.955] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:14:13.562] INIT: version 2.96 booting [2025-09-23 16:14:13.972] INIT: Entering runlevel: 5 [2025-09-23 16:14:13.972] mtd28 attached [2025-09-23 16:14:13.972] mtd24 attached [2025-09-23 16:14:13.972] mtd32 attached [2025-09-23 16:14:13.972] ubi0:animations is mounted. [2025-09-23 16:14:13.972] RTNETLINK answers: File exists [2025-09-23 16:14:13.972] ubi1:textures is mounted. [2025-09-23 16:14:13.972] ubi2:dml_code is mounted. [2025-09-23 16:14:13.972] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:14:13.972] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:14:13.972] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:14:13.972] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:14:13.972] data.LB_FadeInType0=100 [2025-09-23 16:14:13.972] data.CHLH_FadeInType0=0 [2025-09-23 16:14:13.972] data.WU_FadeInDelay=0 [2025-09-23 16:14:13.972] max_time_out=0 [2025-09-23 16:14:13.972] No splash screen [2025-09-23 16:14:13.972] stop dss Done [2025-09-23 16:14:13.972] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:14:14.024] /dev/mem opened. [2025-09-23 16:14:14.024] Memory mapped at address 0xffffaccc7000. [2025-09-23 16:14:14.024] Read at address 0x00600018 (0xffffaccc7018): 0x00000000 [2025-09-23 16:14:14.024] Write at address 0x00600018 (0xffffaccc7018): 0x00400040, readback 0x00400040 [2025-09-23 16:14:14.024] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:14:14.040] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:14:14.199] Loaded PowerVR consumer services. [2025-09-23 16:14:14.312] Waiting data available... [2025-09-23 16:14:14.344] 512+0 records in [2025-09-23 16:14:14.344] 512+0 records out [2025-09-23 16:14:14.392] Starting syslogd/klogd: done [2025-09-23 16:14:14.407] DML Start [2025-09-23 16:14:14.584] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:14:14.971] DML res1: 0 [2025-09-23 16:14:15.185] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:14:15.185] Read Success [2025-09-23 16:14:15.185] Verifying certificate... [2025-09-23 16:14:15.424] Verified OK [2025-09-23 16:14:15.440] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:14:17.177] Verified OK [2025-09-23 16:14:17.177] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:14:17.768] Verified OK [2025-09-23 16:14:17.768] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:14:20.373] fs.protected_hardlinks = 1 [2025-09-23 16:14:20.373] fs.protected_symlinks = 1 [2025-09-23 16:14:20.389] kernel.modules_disabled = 1 [2025-09-23 16:14:20.581] [2025-09-23 16:14:20.581] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:14:21.906] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:14:29.554] SBL1:1210.0.1.0 [2025-09-23 16:14:29.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:14:31.184] SBL2:1210.0.1.0 [2025-09-23 16:14:31.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:14:31.328] j-A [2025-09-23 16:14:38.701] The R5 Autosar Classic is running [2025-09-23 16:14:38.701] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:14:38.701] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:14:39.307] INIT: version 2.96 booting [2025-09-23 16:14:39.420] INIT: Entering runlevel: 5 [2025-09-23 16:14:39.753] mtd28 attached [2025-09-23 16:14:39.753] mtd24 attached [2025-09-23 16:14:39.753] mtd32 attached [2025-09-23 16:14:39.753] RTNETLINK answers: File exists [2025-09-23 16:14:39.753] ubi0:animations is mounted. [2025-09-23 16:14:39.753] ubi2:dml_code is mounted. [2025-09-23 16:14:39.753] ubi1:textures is mounted. [2025-09-23 16:14:39.753] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:14:39.753] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:14:39.753] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:14:39.753] data.LB_FadeInType0=100 [2025-09-23 16:14:39.753] data.CHLH_FadeInType0=0 [2025-09-23 16:14:39.753] data.WU_FadeInDelay=0 [2025-09-23 16:14:39.753] max_time_out=0 [2025-09-23 16:14:39.753] No splash screen [2025-09-23 16:14:39.753] stop dss Done [2025-09-23 16:14:39.753] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:14:39.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:14:39.775] /dev/mem opened. [2025-09-23 16:14:39.775] Memory mapped at address 0xffffb8d6c000. [2025-09-23 16:14:39.775] Read at address 0x00600018 (0xffffb8d6c018): 0x00000000 [2025-09-23 16:14:39.775] Write at address 0x00600018 (0xffffb8d6c018): 0x00400040, readback 0x00400040 [2025-09-23 16:14:39.791] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:14:39.807] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:14:39.871] Loaded PowerVR consumer services. [2025-09-23 16:14:40.047] Waiting data available... [2025-09-23 16:14:40.063] 512+0 records in [2025-09-23 16:14:40.063] 512+0 records out [2025-09-23 16:14:40.095] Starting syslogd/klogd: done [2025-09-23 16:14:40.111] DML Start [2025-09-23 16:14:40.302] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:14:40.543] DML res1: 0 [2025-09-23 16:14:40.910] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:14:40.910] Read Success [2025-09-23 16:14:40.927] Verifying certificate... [2025-09-23 16:14:41.198] Verified OK [2025-09-23 16:14:41.214] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:14:42.892] Verified OK [2025-09-23 16:14:42.926] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:14:43.516] Verified OK [2025-09-23 16:14:43.516] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:14:46.154] fs.protected_hardlinks = 1 [2025-09-23 16:14:46.176] fs.protected_symlinks = 1 [2025-09-23 16:14:46.176] kernel.modules_disabled = 1 [2025-09-23 16:14:46.378] [2025-09-23 16:14:46.378] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:14:47.592] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:14:55.318] SBL1:1210.0.1.0 [2025-09-23 16:14:55.365] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:14:56.932] SBL2:1210.0.1.0 [2025-09-23 16:14:56.980] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:14:57.076] j-A [2025-09-23 16:15:04.430] The R5 Autosar Classic is running [2025-09-23 16:15:04.455] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:15:04.455] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:15:05.062] INIT: version 2.96 booting [2025-09-23 16:15:05.174] INIT: Entering runlevel: 5 [2025-09-23 16:15:05.473] mtd32 attached [2025-09-23 16:15:05.473] mtd28 attached [2025-09-23 16:15:05.473] mtd24 attached [2025-09-23 16:15:05.473] ubi0:dml_code is mounted. [2025-09-23 16:15:05.473] ubi1:animations is mounted. [2025-09-23 16:15:05.473] RTNETLINK answers: File exists [2025-09-23 16:15:05.473] ubi2:textures is mounted. [2025-09-23 16:15:05.473] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:15:05.473] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:15:05.473] data.LB_FadeInType0=100 [2025-09-23 16:15:05.473] data.CHLH_FadeInType0=0 [2025-09-23 16:15:05.473] data.WU_FadeInDelay=0 [2025-09-23 16:15:05.473] max_time_out=0 [2025-09-23 16:15:05.473] No splash screen [2025-09-23 16:15:05.473] stop dss Done [2025-09-23 16:15:05.473] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:15:05.473] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:15:05.473] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:15:05.508] /dev/mem opened. [2025-09-23 16:15:05.508] Memory mapped at address 0xffff989b6000. [2025-09-23 16:15:05.508] Read at address 0x00600018 (0xffff989b6018): 0x00000000 [2025-09-23 16:15:05.508] Write at address 0x00600018 (0xffff989b6018): 0x00400040, readback 0x00400040 [2025-09-23 16:15:05.562] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:15:05.562] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:15:05.625] Loaded PowerVR consumer services. [2025-09-23 16:15:05.802] Waiting data available... [2025-09-23 16:15:05.833] 512+0 records in [2025-09-23 16:15:05.834] 512+0 records out [2025-09-23 16:15:05.881] Starting syslogd/klogd: done [2025-09-23 16:15:05.897] DML Start [2025-09-23 16:15:06.089] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:15:06.471] DML res1: 0 [2025-09-23 16:15:06.773] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:15:06.773] Read Success [2025-09-23 16:15:06.773] Verifying certificate... [2025-09-23 16:15:07.045] Verified OK [2025-09-23 16:15:07.061] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:15:08.728] Verified OK [2025-09-23 16:15:08.728] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:15:09.239] Verified OK [2025-09-23 16:15:09.261] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:15:11.691] fs.protected_hardlinks = 1 [2025-09-23 16:15:11.718] fs.protected_symlinks = 1 [2025-09-23 16:15:11.718] kernel.modules_disabled = 1 [2025-09-23 16:15:11.894] [2025-09-23 16:15:11.894] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:15:13.330] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:15:21.081] SBL1:1210.0.1.0 [2025-09-23 16:15:21.113] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:15:22.696] SBL2:1210.0.1.0 [2025-09-23 16:15:22.744] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:15:22.839] j-A [2025-09-23 16:15:30.212] The R5 Autosar Classic is running [2025-09-23 16:15:30.215] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:15:30.215] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:15:30.822] INIT: version 2.96 booting [2025-09-23 16:15:30.934] INIT: Entering runlevel: 5 [2025-09-23 16:15:31.093] mtd28 attached [2025-09-23 16:15:31.093] mtd32 attached [2025-09-23 16:15:31.223] mtd24 attached [2025-09-23 16:15:31.224] RTNETLINK answers: File exists [2025-09-23 16:15:31.224] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:15:31.224] ubi0:animations is mounted. [2025-09-23 16:15:31.224] ubi2:textures is mounted. [2025-09-23 16:15:31.224] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:15:31.224] ubi1:dml_code is mounted. [2025-09-23 16:15:31.224] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:15:31.224] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:15:31.224] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:15:31.224] data.LB_FadeInType0=100 [2025-09-23 16:15:31.224] data.CHLH_FadeInType0=0 [2025-09-23 16:15:31.224] data.WU_FadeInDelay=0 [2025-09-23 16:15:31.224] max_time_out=0 [2025-09-23 16:15:31.224] No splash screen [2025-09-23 16:15:31.224] stop dss Done [2025-09-23 16:15:31.280] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:15:31.280] /dev/mem opened. [2025-09-23 16:15:31.280] Memory mapped at address 0xffffaa26d000. [2025-09-23 16:15:31.280] Read at address 0x00600018 (0xffffaa26d018): 0x00000000 [2025-09-23 16:15:31.280] Write at address 0x00600018 (0xffffaa26d018): 0x00400040, readback 0x00400040 [2025-09-23 16:15:31.280] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:15:31.408] Loaded PowerVR consumer services. [2025-09-23 16:15:31.568] Waiting data available... [2025-09-23 16:15:31.600] 512+0 records in [2025-09-23 16:15:31.600] 512+0 records out [2025-09-23 16:15:31.648] Starting syslogd/klogd: done [2025-09-23 16:15:31.664] DML Start [2025-09-23 16:15:31.840] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:15:32.237] DML res1: 0 [2025-09-23 16:15:32.464] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:15:32.480] Read Success [2025-09-23 16:15:32.480] Verifying certificate... [2025-09-23 16:15:32.703] Verified OK [2025-09-23 16:15:32.719] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:15:34.392] Verified OK [2025-09-23 16:15:34.392] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:15:34.958] Verified OK [2025-09-23 16:15:34.958] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:15:37.514] fs.protected_hardlinks = 1 [2025-09-23 16:15:37.514] fs.protected_symlinks = 1 [2025-09-23 16:15:37.530] kernel.modules_disabled = 1 [2025-09-23 16:15:37.723] [2025-09-23 16:15:37.723] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:15:39.159] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:15:46.843] SBL1:1210.0.1.0 [2025-09-23 16:15:46.891] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:15:48.457] SBL2:1210.0.1.0 [2025-09-23 16:15:48.505] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:15:48.602] j-A [2025-09-23 16:15:55.955] The R5 Autosar Classic is running [2025-09-23 16:15:55.980] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:15:55.980] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:15:56.589] INIT: version 2.96 booting [2025-09-23 16:15:56.988] INIT: Entering runlevel: 5 [2025-09-23 16:15:56.988] mtd24 attached [2025-09-23 16:15:56.988] mtd28 attached [2025-09-23 16:15:56.988] mtd32 attached [2025-09-23 16:15:56.988] ubi0:textures is mounted. [2025-09-23 16:15:56.988] ubi1:animations is mounted. [2025-09-23 16:15:56.988] RTNETLINK answers: File exists [2025-09-23 16:15:56.988] ubi2:dml_code is mounted. [2025-09-23 16:15:56.988] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:15:56.988] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:15:56.988] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:15:56.994] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:15:56.994] data.LB_FadeInType0=100 [2025-09-23 16:15:56.994] data.CHLH_FadeInType0=0 [2025-09-23 16:15:56.994] data.WU_FadeInDelay=0 [2025-09-23 16:15:56.994] max_time_out=0 [2025-09-23 16:15:56.994] No splash screen [2025-09-23 16:15:56.994] stop dss Done [2025-09-23 16:15:56.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:15:57.042] /dev/mem opened. [2025-09-23 16:15:57.042] Memory mapped at address 0xffffbd737000. [2025-09-23 16:15:57.079] Read at address 0x00600018 (0xffffbd737018): 0x00000000 [2025-09-23 16:15:57.079] Write at address 0x00600018 (0xffffbd737018): 0x00400040, readback 0x00400040 [2025-09-23 16:15:57.079] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:15:57.079] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:15:57.158] Loaded PowerVR consumer services. [2025-09-23 16:15:57.335] Waiting data available... [2025-09-23 16:15:57.351] 512+0 records in [2025-09-23 16:15:57.351] 512+0 records out [2025-09-23 16:15:57.399] Starting syslogd/klogd: done [2025-09-23 16:15:57.414] DML Start [2025-09-23 16:15:57.622] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:15:57.846] DML res1: 0 [2025-09-23 16:15:58.227] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:15:58.227] Read Success [2025-09-23 16:15:58.227] Verifying certificate... [2025-09-23 16:15:58.467] Verified OK [2025-09-23 16:15:58.467] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:16:00.225] Verified OK [2025-09-23 16:16:00.225] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:16:00.784] Verified OK [2025-09-23 16:16:00.807] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:16:03.284] fs.protected_hardlinks = 1 [2025-09-23 16:16:03.315] fs.protected_symlinks = 1 [2025-09-23 16:16:03.315] kernel.modules_disabled = 1 [2025-09-23 16:16:03.522] [2025-09-23 16:16:03.522] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:16:04.927] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:16:12.601] SBL1:1210.0.1.0 [2025-09-23 16:16:12.633] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:16:14.216] SBL2:1210.0.1.0 [2025-09-23 16:16:14.264] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:16:14.360] j-A [2025-09-23 16:16:21.715] The R5 Autosar Classic is running [2025-09-23 16:16:21.715] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:16:21.736] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:16:22.344] INIT: version 2.96 booting [2025-09-23 16:16:22.753] INIT: Entering runlevel: 5 [2025-09-23 16:16:22.753] mtd24 attached [2025-09-23 16:16:22.753] mtd32 attached [2025-09-23 16:16:22.753] mtd28 attached [2025-09-23 16:16:22.753] ubi0:textures is mounted. [2025-09-23 16:16:22.753] RTNETLINK answers: File exists [2025-09-23 16:16:22.753] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:16:22.753] ubi2:animations is mounted. [2025-09-23 16:16:22.753] ubi1:dml_code is mounted. [2025-09-23 16:16:22.753] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:16:22.753] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:16:22.753] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:16:22.753] data.LB_FadeInType0=100 [2025-09-23 16:16:22.753] data.CHLH_FadeInType0=0 [2025-09-23 16:16:22.753] data.WU_FadeInDelay=0 [2025-09-23 16:16:22.753] max_time_out=0 [2025-09-23 16:16:22.753] No splash screen [2025-09-23 16:16:22.753] stop dss Done [2025-09-23 16:16:22.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:16:22.813] /dev/mem opened. [2025-09-23 16:16:22.813] Memory mapped at address 0xffffa745f000. [2025-09-23 16:16:22.813] Read at address 0x00600018 (0xffffa745f018): 0x00000000 [2025-09-23 16:16:22.813] Write at address 0x00600018 (0xffffa745f018): 0x00400040, readback 0x00400040 [2025-09-23 16:16:22.813] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:16:22.813] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:16:22.909] Loaded PowerVR consumer services. [2025-09-23 16:16:23.085] Waiting data available... [2025-09-23 16:16:23.101] 512+0 records in [2025-09-23 16:16:23.117] 512+0 records out [2025-09-23 16:16:23.133] Starting syslogd/klogd: done [2025-09-23 16:16:23.149] DML Start [2025-09-23 16:16:23.340] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:16:23.548] DML res1: 0 [2025-09-23 16:16:23.963] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:16:23.963] Read Success [2025-09-23 16:16:23.963] Verifying certificate... [2025-09-23 16:16:24.234] Verified OK [2025-09-23 16:16:24.234] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:16:25.817] Verified OK [2025-09-23 16:16:25.817] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:16:26.451] Verified OK [2025-09-23 16:16:26.451] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:16:29.136] fs.protected_hardlinks = 1 [2025-09-23 16:16:29.152] fs.protected_symlinks = 1 [2025-09-23 16:16:29.152] kernel.modules_disabled = 1 [2025-09-23 16:16:29.344] [2025-09-23 16:16:29.344] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:16:30.618] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:16:38.364] SBL1:1210.0.1.0 [2025-09-23 16:16:38.412] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:16:39.979] SBL2:1210.0.1.0 [2025-09-23 16:16:40.027] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:16:40.139] j-A [2025-09-23 16:16:47.478] The R5 Autosar Classic is running [2025-09-23 16:16:47.509] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:16:47.509] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:16:48.116] INIT: version 2.96 booting [2025-09-23 16:16:48.228] INIT: Entering runlevel: 5 [2025-09-23 16:16:48.519] mtd24 attached [2025-09-23 16:16:48.519] mtd28 attached [2025-09-23 16:16:48.519] mtd32 attached [2025-09-23 16:16:48.519] ubi0:textures is mounted. [2025-09-23 16:16:48.519] RTNETLINK answers: File exists [2025-09-23 16:16:48.519] ubi1:animations is mounted. [2025-09-23 16:16:48.519] ubi2:dml_code is mounted. [2025-09-23 16:16:48.519] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:16:48.519] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:16:48.519] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:16:48.519] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:16:48.519] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:16:48.519] data.LB_FadeInType0=100 [2025-09-23 16:16:48.519] data.CHLH_FadeInType0=0 [2025-09-23 16:16:48.519] data.WU_FadeInDelay=0 [2025-09-23 16:16:48.519] max_time_out=0 [2025-09-23 16:16:48.519] No splash screen [2025-09-23 16:16:48.519] stop dss Done [2025-09-23 16:16:48.544] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:16:48.599] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:16:48.599] /dev/mem opened. [2025-09-23 16:16:48.599] Memory mapped at address 0xffff9d391000. [2025-09-23 16:16:48.599] Read at address 0x00600018 (0xffff9d391018): 0x00000000 [2025-09-23 16:16:48.599] Write at address 0x00600018 (0xffff9d391018): 0x00400040, readback 0x00400040 [2025-09-23 16:16:48.678] Loaded PowerVR consumer services. [2025-09-23 16:16:48.853] Waiting data available... [2025-09-23 16:16:48.886] 512+0 records in [2025-09-23 16:16:48.886] 512+0 records out [2025-09-23 16:16:48.934] Starting syslogd/klogd: done [2025-09-23 16:16:48.950] DML Start [2025-09-23 16:16:49.174] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:16:49.534] DML res1: 0 [2025-09-23 16:16:49.701] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:16:49.722] Read Success [2025-09-23 16:16:49.722] Verifying certificate... [2025-09-23 16:16:49.946] Verified OK [2025-09-23 16:16:49.962] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:16:51.518] Verified OK [2025-09-23 16:16:51.518] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:16:52.153] Verified OK [2025-09-23 16:16:52.153] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:16:54.871] fs.protected_hardlinks = 1 [2025-09-23 16:16:54.871] fs.protected_symlinks = 1 [2025-09-23 16:16:54.887] kernel.modules_disabled = 1 [2025-09-23 16:16:55.079] [2025-09-23 16:16:55.079] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:16:56.458] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:17:04.108] SBL1:1210.0.1.0 [2025-09-23 16:17:04.156] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:17:05.722] SBL2:1210.0.1.0 [2025-09-23 16:17:05.770] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:17:05.883] j-A [2025-09-23 16:17:13.253] The R5 Autosar Classic is running [2025-09-23 16:17:13.253] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:17:13.253] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:17:13.861] INIT: version 2.96 booting [2025-09-23 16:17:14.316] INIT: Entering runlevel: 5 [2025-09-23 16:17:14.316] mtd32 attached [2025-09-23 16:17:14.316] mtd24 attached [2025-09-23 16:17:14.316] mtd28 attached [2025-09-23 16:17:14.316] RTNETLINK answers: File exists [2025-09-23 16:17:14.316] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:17:14.316] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:17:14.316] ubi2:animations is mounted. [2025-09-23 16:17:14.316] ubi1:textures is mounted. [2025-09-23 16:17:14.316] ubi0:dml_code is mounted. [2025-09-23 16:17:14.316] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:17:14.316] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:17:14.316] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:17:14.316] data.LB_FadeInType0=100 [2025-09-23 16:17:14.316] data.CHLH_FadeInType0=0 [2025-09-23 16:17:14.316] data.WU_FadeInDelay=0 [2025-09-23 16:17:14.316] max_time_out=0 [2025-09-23 16:17:14.316] No splash screen [2025-09-23 16:17:14.316] stop dss Done [2025-09-23 16:17:14.316] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:17:14.316] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:17:14.339] /dev/mem opened. [2025-09-23 16:17:14.339] Memory mapped at address 0xffffb4323000. [2025-09-23 16:17:14.339] Read at address 0x00600018 (0xffffb4323018): 0x00000000 [2025-09-23 16:17:14.339] Write at address 0x00600018 (0xffffb4323018): 0x00400040, readback 0x00400040 [2025-09-23 16:17:14.420] Loaded PowerVR consumer services. [2025-09-23 16:17:14.596] Waiting data available... [2025-09-23 16:17:14.612] 512+0 records in [2025-09-23 16:17:14.628] 512+0 records out [2025-09-23 16:17:14.644] Starting syslogd/klogd: done [2025-09-23 16:17:14.660] DML Start [2025-09-23 16:17:14.803] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:17:14.995] DML res1: 0 [2025-09-23 16:17:15.531] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:17:15.531] Read Success [2025-09-23 16:17:15.531] Verifying certificate... [2025-09-23 16:17:15.771] Verified OK [2025-09-23 16:17:15.787] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:17:17.464] Verified OK [2025-09-23 16:17:17.464] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:17:18.120] Verified OK [2025-09-23 16:17:18.120] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:17:20.740] fs.protected_hardlinks = 1 [2025-09-23 16:17:20.756] fs.protected_symlinks = 1 [2025-09-23 16:17:20.772] kernel.modules_disabled = 1 [2025-09-23 16:17:20.965] [2025-09-23 16:17:20.965] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:17:22.105] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:17:29.888] SBL1:1210.0.1.0 [2025-09-23 16:17:29.920] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:17:31.503] SBL2:1210.0.1.0 [2025-09-23 16:17:31.553] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:17:31.648] j-A [2025-09-23 16:17:39.022] The R5 Autosar Classic is running [2025-09-23 16:17:39.022] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:17:39.022] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:17:39.630] INIT: version 2.96 booting [2025-09-23 16:17:39.726] INIT: Entering runlevel: 5 [2025-09-23 16:17:40.068] mtd28 attached [2025-09-23 16:17:40.068] mtd24 attached [2025-09-23 16:17:40.068] mtd32 attached [2025-09-23 16:17:40.068] ubi0:animations is mounted. [2025-09-23 16:17:40.068] ubi1:textures is mounted. [2025-09-23 16:17:40.068] RTNETLINK answers: File exists [2025-09-23 16:17:40.068] ubi2:dml_code is mounted. [2025-09-23 16:17:40.068] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:17:40.068] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:17:40.068] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:17:40.068] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:17:40.068] data.LB_FadeInType0=100 [2025-09-23 16:17:40.068] data.CHLH_FadeInType0=0 [2025-09-23 16:17:40.068] data.WU_FadeInDelay=0 [2025-09-23 16:17:40.068] max_time_out=0 [2025-09-23 16:17:40.068] No splash screen [2025-09-23 16:17:40.068] stop dss Done [2025-09-23 16:17:40.068] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:17:40.100] /dev/mem opened. [2025-09-23 16:17:40.100] Memory mapped at address 0xffffa4105000. [2025-09-23 16:17:40.100] Read at address 0x00600018 (0xffffa4105018): 0x00000000 [2025-09-23 16:17:40.100] Write at address 0x00600018 (0xffffa4105018): 0x00400040, readback 0x00400040 [2025-09-23 16:17:40.100] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:17:40.115] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:17:40.179] Loaded PowerVR consumer services. [2025-09-23 16:17:40.372] Waiting data available... [2025-09-23 16:17:40.387] 512+0 records in [2025-09-23 16:17:40.403] 512+0 records out [2025-09-23 16:17:40.451] Starting syslogd/klogd: done [2025-09-23 16:17:40.451] DML Start [2025-09-23 16:17:40.627] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:17:41.068] DML res1: 0 [2025-09-23 16:17:41.235] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:17:41.256] Read Success [2025-09-23 16:17:41.256] Verifying certificate... [2025-09-23 16:17:41.512] Verified OK [2025-09-23 16:17:41.512] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:17:43.159] Verified OK [2025-09-23 16:17:43.181] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:17:43.708] Verified OK [2025-09-23 16:17:43.708] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:17:46.410] fs.protected_hardlinks = 1 [2025-09-23 16:17:46.431] fs.protected_symlinks = 1 [2025-09-23 16:17:46.431] kernel.modules_disabled = 1 [2025-09-23 16:17:46.634] [2025-09-23 16:17:46.634] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:17:47.970] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:17:55.638] SBL1:1210.0.1.0 [2025-09-23 16:17:55.686] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:17:57.252] SBL2:1210.0.1.0 [2025-09-23 16:17:57.301] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:17:57.397] j-A [2025-09-23 16:18:04.751] The R5 Autosar Classic is running [2025-09-23 16:18:04.776] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:18:04.776] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:18:05.384] INIT: version 2.96 booting [2025-09-23 16:18:05.496] INIT: Entering runlevel: 5 [2025-09-23 16:18:05.778] mtd24 attached [2025-09-23 16:18:05.778] mtd28 attached [2025-09-23 16:18:05.778] mtd32 attached [2025-09-23 16:18:05.778] ubi0:textures is mounted. [2025-09-23 16:18:05.778] ubi1:animations is mounted. [2025-09-23 16:18:05.779] RTNETLINK answers: File exists [2025-09-23 16:18:05.779] ubi2:dml_code is mounted. [2025-09-23 16:18:05.779] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:18:05.779] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:18:05.779] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:18:05.779] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:18:05.779] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:18:05.779] data.LB_FadeInType0=100 [2025-09-23 16:18:05.779] data.CHLH_FadeInType0=0 [2025-09-23 16:18:05.779] data.WU_FadeInDelay=0 [2025-09-23 16:18:05.779] max_time_out=0 [2025-09-23 16:18:05.779] No splash screen [2025-09-23 16:18:05.779] stop dss Done [2025-09-23 16:18:05.811] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:18:05.836] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:18:05.874] /dev/mem opened. [2025-09-23 16:18:05.874] Memory mapped at address 0xffff9aac1000. [2025-09-23 16:18:05.874] Read at address 0x00600018 (0xffff9aac1018): 0x00000000 [2025-09-23 16:18:05.874] Write at address 0x00600018 (0xffff9aac1018): 0x00400040, readback 0x00400040 [2025-09-23 16:18:05.986] Loaded PowerVR consumer services. [2025-09-23 16:18:06.130] Waiting data available... [2025-09-23 16:18:06.162] 512+0 records in [2025-09-23 16:18:06.162] 512+0 records out [2025-09-23 16:18:06.210] Starting syslogd/klogd: done [2025-09-23 16:18:06.210] DML Start [2025-09-23 16:18:06.386] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:18:06.776] DML res1: 0 [2025-09-23 16:18:07.082] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:18:07.082] Read Success [2025-09-23 16:18:07.082] Verifying certificate... [2025-09-23 16:18:07.305] Verified OK [2025-09-23 16:18:07.321] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:18:08.888] Verified OK [2025-09-23 16:18:08.888] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:18:09.576] Verified OK [2025-09-23 16:18:09.576] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:18:12.166] fs.protected_hardlinks = 1 [2025-09-23 16:18:12.182] fs.protected_symlinks = 1 [2025-09-23 16:18:12.182] kernel.modules_disabled = 1 [2025-09-23 16:18:12.390] [2025-09-23 16:18:12.390] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:18:13.644] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:18:21.407] SBL1:1210.0.1.0 [2025-09-23 16:18:21.439] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:18:23.022] SBL2:1210.0.1.0 [2025-09-23 16:18:23.062] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:18:23.165] j-A [2025-09-23 16:18:30.541] The R5 Autosar Classic is running [2025-09-23 16:18:30.541] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:18:30.541] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:18:31.148] INIT: version 2.96 booting [2025-09-23 16:18:31.260] INIT: Entering runlevel: 5 [2025-09-23 16:18:31.578] mtd28 attached [2025-09-23 16:18:31.578] mtd24 attached [2025-09-23 16:18:31.578] mtd32 attached [2025-09-23 16:18:31.578] RTNETLINK answers: File exists [2025-09-23 16:18:31.578] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:18:31.578] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:18:31.578] ubi1:textures is mounted. [2025-09-23 16:18:31.578] ubi0:animations is mounted. [2025-09-23 16:18:31.578] ubi2:dml_code is mounted. [2025-09-23 16:18:31.578] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:18:31.578] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:18:31.578] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:18:31.578] data.LB_FadeInType0=100 [2025-09-23 16:18:31.578] data.CHLH_FadeInType0=0 [2025-09-23 16:18:31.578] data.WU_FadeInDelay=0 [2025-09-23 16:18:31.578] max_time_out=0 [2025-09-23 16:18:31.578] No splash screen [2025-09-23 16:18:31.578] stop dss Done [2025-09-23 16:18:31.636] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:18:31.636] /dev/mem opened. [2025-09-23 16:18:31.636] Memory mapped at address 0xffff9d1a4000. [2025-09-23 16:18:31.636] Read at address 0x00600018 (0xffff9d1a4018): 0x00000000 [2025-09-23 16:18:31.636] Write at address 0x00600018 (0xffff9d1a4018): 0x00400040, readback 0x00400040 [2025-09-23 16:18:31.636] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:18:31.859] Loaded PowerVR consumer services. [2025-09-23 16:18:31.924] Waiting data available... [2025-09-23 16:18:31.940] 512+0 records in [2025-09-23 16:18:31.940] 512+0 records out [2025-09-23 16:18:31.956] Starting syslogd/klogd: done [2025-09-23 16:18:31.988] DML Start [2025-09-23 16:18:32.164] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:18:32.387] DML res1: 0 [2025-09-23 16:18:32.788] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:18:32.809] Read Success [2025-09-23 16:18:32.809] Verifying certificate... [2025-09-23 16:18:33.064] Verified OK [2025-09-23 16:18:33.096] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:18:34.746] Verified OK [2025-09-23 16:18:34.746] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:18:35.330] Verified OK [2025-09-23 16:18:35.330] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:18:38.049] fs.protected_hardlinks = 1 [2025-09-23 16:18:38.049] fs.protected_symlinks = 1 [2025-09-23 16:18:38.064] kernel.modules_disabled = 1 [2025-09-23 16:18:38.273] [2025-09-23 16:18:38.273] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:18:39.399] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:18:47.168] SBL1:1210.0.1.0 [2025-09-23 16:18:47.200] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:18:48.783] SBL2:1210.0.1.0 [2025-09-23 16:18:48.815] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:18:48.927] j-A [2025-09-23 16:18:56.282] The R5 Autosar Classic is running [2025-09-23 16:18:56.282] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:18:56.303] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:18:56.911] INIT: version 2.96 booting [2025-09-23 16:18:57.332] INIT: Entering runlevel: 5 [2025-09-23 16:18:57.332] mtd24 attached [2025-09-23 16:18:57.332] mtd28 attached [2025-09-23 16:18:57.332] mtd32 attached [2025-09-23 16:18:57.332] RTNETLINK answers: File exists [2025-09-23 16:18:57.332] ubi0:textures is mounted. [2025-09-23 16:18:57.332] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:18:57.332] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:18:57.332] ubi1:animations is mounted. [2025-09-23 16:18:57.332] ubi2:dml_code is mounted. [2025-09-23 16:18:57.332] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:18:57.332] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:18:57.332] data.LB_FadeInType0=100 [2025-09-23 16:18:57.332] data.CHLH_FadeInType0=0 [2025-09-23 16:18:57.332] data.WU_FadeInDelay=0 [2025-09-23 16:18:57.332] max_time_out=0 [2025-09-23 16:18:57.332] No splash screen [2025-09-23 16:18:57.332] stop dss Done [2025-09-23 16:18:57.332] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:18:57.335] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:18:57.351] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:18:57.390] /dev/mem opened. [2025-09-23 16:18:57.390] Memory mapped at address 0xffff8341c000. [2025-09-23 16:18:57.390] Read at address 0x00600018 (0xffff8341c018): 0x00000000 [2025-09-23 16:18:57.390] Write at address 0x00600018 (0xffff8341c018): 0x00400040, readback 0x00400040 [2025-09-23 16:18:57.582] Loaded PowerVR consumer services. [2025-09-23 16:18:57.646] Waiting data available... [2025-09-23 16:18:57.678] 512+0 records in [2025-09-23 16:18:57.678] 512+0 records out [2025-09-23 16:18:57.710] Starting syslogd/klogd: done [2025-09-23 16:18:57.726] DML Start [2025-09-23 16:18:57.902] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:18:58.110] DML res1: 0 [2025-09-23 16:18:58.553] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:18:58.553] Read Success [2025-09-23 16:18:58.553] Verifying certificate... [2025-09-23 16:18:58.793] Verified OK [2025-09-23 16:18:58.809] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:19:00.503] Verified OK [2025-09-23 16:19:00.519] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:19:01.096] Verified OK [2025-09-23 16:19:01.096] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:19:03.688] fs.protected_hardlinks = 1 [2025-09-23 16:19:03.688] fs.protected_symlinks = 1 [2025-09-23 16:19:03.689] kernel.modules_disabled = 1 [2025-09-23 16:19:03.878] [2025-09-23 16:19:03.878] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:19:05.166] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:19:12.919] SBL1:1210.0.1.0 [2025-09-23 16:19:12.967] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:19:14.535] SBL2:1210.0.1.0 [2025-09-23 16:19:14.582] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 16:19:14.695] j-A [2025-09-23 16:19:22.066] The R5 Autosar Classic is running [2025-09-23 16:19:22.066] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:19:22.066] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:19:22.673] INIT: version 2.96 booting [2025-09-23 16:19:22.786] INIT: Entering runlevel: 5 [2025-09-23 16:19:23.118] mtd24 attached [2025-09-23 16:19:23.118] mtd28 attached [2025-09-23 16:19:23.118] mtd32 attached [2025-09-23 16:19:23.118] RTNETLINK answers: File exists [2025-09-23 16:19:23.118] ubi0:textures is mounted. [2025-09-23 16:19:23.118] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:19:23.118] ubi1:animations is mounted. [2025-09-23 16:19:23.118] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:19:23.118] ubi2:dml_code is mounted. [2025-09-23 16:19:23.118] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:19:23.118] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:19:23.118] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:19:23.118] data.LB_FadeInType0=100 [2025-09-23 16:19:23.118] data.CHLH_FadeInType0=0 [2025-09-23 16:19:23.118] data.WU_FadeInDelay=0 [2025-09-23 16:19:23.118] max_time_out=0 [2025-09-23 16:19:23.118] No splash screen [2025-09-23 16:19:23.118] stop dss Done [2025-09-23 16:19:23.157] /dev/mem opened. [2025-09-23 16:19:23.157] Memory mapped at address 0xffff8449a000. [2025-09-23 16:19:23.157] Read at address 0x00600018 (0xffff8449a018): 0x00000000 [2025-09-23 16:19:23.157] Write at address 0x00600018 (0xffff8449a018): 0x00400040, readback 0x00400040 [2025-09-23 16:19:23.157] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:19:23.188] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:19:23.333] Loaded PowerVR consumer services. [2025-09-23 16:19:23.444] Waiting data available... [2025-09-23 16:19:23.460] 512+0 records in [2025-09-23 16:19:23.460] 512+0 records out [2025-09-23 16:19:23.492] Starting syslogd/klogd: done [2025-09-23 16:19:23.508] DML Start [2025-09-23 16:19:23.653] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:19:24.117] DML res1: 0 [2025-09-23 16:19:24.370] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:19:24.370] Read Success [2025-09-23 16:19:24.370] Verifying certificate... [2025-09-23 16:19:24.594] Verified OK [2025-09-23 16:19:24.594] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:19:26.337] Verified OK [2025-09-23 16:19:26.337] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:19:26.944] Verified OK [2025-09-23 16:19:26.944] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:19:29.440] fs.protected_hardlinks = 1 [2025-09-23 16:19:29.455] fs.protected_symlinks = 1 [2025-09-23 16:19:29.471] kernel.modules_disabled = 1 [2025-09-23 16:19:29.663] [2025-09-23 16:19:29.663] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:19:30.910] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:19:38.695] SBL1:1210.0.1.0 [2025-09-23 16:19:38.743] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:19:40.310] SBL2:1210.0.1.0 [2025-09-23 16:19:40.358] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:19:40.470] j-A [2025-09-23 16:19:47.841] The R5 Autosar Classic is running [2025-09-23 16:19:47.841] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:19:47.841] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:19:48.449] INIT: version 2.96 booting [2025-09-23 16:19:48.561] INIT: Entering runlevel: 5 [2025-09-23 16:19:48.904] mtd28 attached [2025-09-23 16:19:48.904] mtd24 attached [2025-09-23 16:19:48.904] mtd32 attached [2025-09-23 16:19:48.904] ubi0:animations is mounted. [2025-09-23 16:19:48.904] RTNETLINK answers: File exists [2025-09-23 16:19:48.904] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:19:48.904] ubi1:textures is mounted. [2025-09-23 16:19:48.904] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:19:48.904] ubi2:dml_code is mounted. [2025-09-23 16:19:48.904] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:19:48.904] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:19:48.904] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:19:48.904] data.LB_FadeInType0=100 [2025-09-23 16:19:48.904] data.CHLH_FadeInType0=0 [2025-09-23 16:19:48.904] data.WU_FadeInDelay=0 [2025-09-23 16:19:48.904] max_time_out=0 [2025-09-23 16:19:48.904] No splash screen [2025-09-23 16:19:48.904] stop dss Done [2025-09-23 16:19:48.949] /dev/mem opened. [2025-09-23 16:19:48.949] Memory mapped at address 0xffff96600000. [2025-09-23 16:19:48.949] Read at address 0x00600018 (0xffff96600018): 0x00000000 [2025-09-23 16:19:48.949] Write at address 0x00600018 (0xffff96600018): 0x00400040, readback 0x00400040 [2025-09-23 16:19:48.949] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:19:48.949] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:19:49.092] Loaded PowerVR consumer services. [2025-09-23 16:19:49.221] Waiting data available... [2025-09-23 16:19:49.237] 512+0 records in [2025-09-23 16:19:49.237] 512+0 records out [2025-09-23 16:19:49.268] Starting syslogd/klogd: done [2025-09-23 16:19:49.284] DML Start [2025-09-23 16:19:49.460] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:19:49.700] DML res1: 0 [2025-09-23 16:19:50.128] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:19:50.128] Read Success [2025-09-23 16:19:50.128] Verifying certificate... [2025-09-23 16:19:50.382] Verified OK [2025-09-23 16:19:50.398] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:19:51.901] Verified OK [2025-09-23 16:19:51.901] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:19:52.538] Verified OK [2025-09-23 16:19:52.538] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:19:55.241] fs.protected_hardlinks = 1 [2025-09-23 16:19:55.241] fs.protected_symlinks = 1 [2025-09-23 16:19:55.257] kernel.modules_disabled = 1 [2025-09-23 16:19:55.465] [2025-09-23 16:19:55.465] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:19:56.815] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:20:04.487] SBL1:1210.0.1.0 [2025-09-23 16:20:04.519] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:20:06.100] SBL2:1210.0.1.0 [2025-09-23 16:20:06.142] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:20:06.245] j-A [2025-09-23 16:20:13.619] The R5 Autosar Classic is running [2025-09-23 16:20:13.619] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:20:13.619] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:20:14.226] INIT: version 2.96 booting [2025-09-23 16:20:14.338] INIT: Entering runlevel: 5 [2025-09-23 16:20:14.643] mtd24 attached [2025-09-23 16:20:14.643] mtd28 attached [2025-09-23 16:20:14.643] mtd32 attached [2025-09-23 16:20:14.643] ubi0:textures is mounted. [2025-09-23 16:20:14.643] ubi1:animations is mounted. [2025-09-23 16:20:14.643] RTNETLINK answers: File exists [2025-09-23 16:20:14.643] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:20:14.643] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:20:14.643] ubi2:dml_code is mounted. [2025-09-23 16:20:14.643] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:20:14.643] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:20:14.643] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:20:14.643] data.LB_FadeInType0=100 [2025-09-23 16:20:14.643] data.CHLH_FadeInType0=0 [2025-09-23 16:20:14.643] data.WU_FadeInDelay=0 [2025-09-23 16:20:14.643] max_time_out=0 [2025-09-23 16:20:14.643] No splash screen [2025-09-23 16:20:14.643] stop dss Done [2025-09-23 16:20:14.643] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:20:14.669] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:20:14.703] /dev/mem opened. [2025-09-23 16:20:14.703] Memory mapped at address 0xffff96938000. [2025-09-23 16:20:14.703] Read at address 0x00600018 (0xffff96938018): 0x00000000 [2025-09-23 16:20:14.703] Write at address 0x00600018 (0xffff96938018): 0x00400040, readback 0x00400040 [2025-09-23 16:20:14.846] Loaded PowerVR consumer services. [2025-09-23 16:20:14.974] Waiting data available... [2025-09-23 16:20:14.990] 512+0 records in [2025-09-23 16:20:14.990] 512+0 records out [2025-09-23 16:20:15.038] Starting syslogd/klogd: done [2025-09-23 16:20:15.054] DML Start [2025-09-23 16:20:15.230] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:20:15.658] DML res1: 0 [2025-09-23 16:20:15.996] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:20:15.996] Read Success [2025-09-23 16:20:15.996] Verifying certificate... [2025-09-23 16:20:16.253] Verified OK [2025-09-23 16:20:16.285] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:20:18.057] Verified OK [2025-09-23 16:20:18.057] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:20:18.596] Verified OK [2025-09-23 16:20:18.596] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:20:21.137] fs.protected_hardlinks = 1 [2025-09-23 16:20:21.137] fs.protected_symlinks = 1 [2025-09-23 16:20:21.153] kernel.modules_disabled = 1 [2025-09-23 16:20:21.360] [2025-09-23 16:20:21.360] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:20:22.487] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:20:30.232] SBL1:1210.0.1.0 [2025-09-23 16:20:30.280] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:20:31.847] SBL2:1210.0.1.0 [2025-09-23 16:20:31.899] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:20:32.007] j-A [2025-09-23 16:20:39.378] The R5 Autosar Classic is running [2025-09-23 16:20:39.378] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:20:39.378] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:20:39.986] INIT: version 2.96 booting [2025-09-23 16:20:40.097] INIT: Entering runlevel: 5 [2025-09-23 16:20:40.398] mtd28 attached [2025-09-23 16:20:40.398] mtd24 attached [2025-09-23 16:20:40.398] mtd32 attached [2025-09-23 16:20:40.398] ubi0:animations is mounted. [2025-09-23 16:20:40.398] RTNETLINK answers: File exists [2025-09-23 16:20:40.398] ubi1:textures is mounted. [2025-09-23 16:20:40.398] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:20:40.398] ubi2:dml_code is mounted. [2025-09-23 16:20:40.398] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:20:40.398] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:20:40.398] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:20:40.398] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:20:40.398] data.LB_FadeInType0=100 [2025-09-23 16:20:40.398] data.CHLH_FadeInType0=0 [2025-09-23 16:20:40.398] data.WU_FadeInDelay=0 [2025-09-23 16:20:40.398] max_time_out=0 [2025-09-23 16:20:40.398] No splash screen [2025-09-23 16:20:40.398] stop dss Done [2025-09-23 16:20:40.444] /dev/mem opened. [2025-09-23 16:20:40.444] Memory mapped at address 0xffff91610000. [2025-09-23 16:20:40.444] Read at address 0x00600018 (0xffff91610018): 0x00000000 [2025-09-23 16:20:40.444] Write at address 0x00600018 (0xffff91610018): 0x00400040, readback 0x00400040 [2025-09-23 16:20:40.444] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:20:40.460] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:20:40.587] Loaded PowerVR consumer services. [2025-09-23 16:20:40.731] Waiting data available... [2025-09-23 16:20:40.763] 512+0 records in [2025-09-23 16:20:40.763] 512+0 records out [2025-09-23 16:20:40.779] Starting syslogd/klogd: done [2025-09-23 16:20:40.795] DML Start [2025-09-23 16:20:40.971] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:20:41.412] DML res1: 0 [2025-09-23 16:20:41.658] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:20:41.680] Read Success [2025-09-23 16:20:41.680] Verifying certificate... [2025-09-23 16:20:41.984] Verified OK [2025-09-23 16:20:42.000] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:20:43.695] Verified OK [2025-09-23 16:20:43.734] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:20:44.192] Verified OK [2025-09-23 16:20:44.192] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:20:46.622] fs.protected_hardlinks = 1 [2025-09-23 16:20:46.622] fs.protected_symlinks = 1 [2025-09-23 16:20:46.638] kernel.modules_disabled = 1 [2025-09-23 16:20:46.830] [2025-09-23 16:20:46.846] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:20:48.221] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:20:56.012] SBL1:1210.0.1.0 [2025-09-23 16:20:56.043] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:20:57.626] SBL2:1210.0.1.0 [2025-09-23 16:20:57.658] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:20:57.770] j-A [2025-09-23 16:21:05.125] The R5 Autosar Classic is running [2025-09-23 16:21:05.125] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:21:05.146] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:21:05.753] INIT: version 2.96 booting [2025-09-23 16:21:06.166] INIT: Entering runlevel: 5 [2025-09-23 16:21:06.166] mtd24 attached [2025-09-23 16:21:06.166] mtd32 attached [2025-09-23 16:21:06.166] mtd28 attached [2025-09-23 16:21:06.166] ubi0:textures is mounted. [2025-09-23 16:21:06.166] RTNETLINK answers: File exists [2025-09-23 16:21:06.166] ubi1:dml_code is mounted. [2025-09-23 16:21:06.166] ubi2:animations is mounted. [2025-09-23 16:21:06.166] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:21:06.166] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:21:06.166] data.LB_FadeInType0=100 [2025-09-23 16:21:06.166] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:21:06.166] data.CHLH_FadeInType0=0 [2025-09-23 16:21:06.166] data.WU_FadeInDelay=0 [2025-09-23 16:21:06.166] max_time_out=0 [2025-09-23 16:21:06.166] No splash screen [2025-09-23 16:21:06.166] stop dss Done [2025-09-23 16:21:06.166] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:21:06.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:21:06.233] /dev/mem opened. [2025-09-23 16:21:06.233] Memory mapped at address 0xffffac9b6000. [2025-09-23 16:21:06.233] Read at address 0x00600018 (0xffffac9b6018): 0x00000000 [2025-09-23 16:21:06.233] Write at address 0x00600018 (0xffffac9b6018): 0x00400040, readback 0x00400040 [2025-09-23 16:21:06.248] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:21:06.264] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:21:06.488] Loaded PowerVR consumer services. [2025-09-23 16:21:06.504] Waiting data available... [2025-09-23 16:21:06.520] 512+0 records in [2025-09-23 16:21:06.520] 512+0 records out [2025-09-23 16:21:06.553] Starting syslogd/klogd: done [2025-09-23 16:21:06.569] DML Start [2025-09-23 16:21:06.728] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:21:06.936] DML res1: 0 [2025-09-23 16:21:07.442] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:21:07.442] Read Success [2025-09-23 16:21:07.442] Verifying certificate... [2025-09-23 16:21:07.697] Verified OK [2025-09-23 16:21:07.697] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:21:09.344] Verified OK [2025-09-23 16:21:09.360] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:21:09.976] Verified OK [2025-09-23 16:21:09.976] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:21:12.550] fs.protected_hardlinks = 1 [2025-09-23 16:21:12.584] fs.protected_symlinks = 1 [2025-09-23 16:21:12.584] kernel.modules_disabled = 1 [2025-09-23 16:21:12.758] [2025-09-23 16:21:12.758] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:21:13.995] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:21:21.736] SBL1:1210.0.1.0 [2025-09-23 16:21:21.784] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:21:23.351] SBL2:1210.0.1.0 [2025-09-23 16:21:23.399] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 16:21:23.511] j-A [2025-09-23 16:21:30.885] The R5 Autosar Classic is running [2025-09-23 16:21:30.885] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:21:30.885] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:21:31.493] INIT: version 2.96 booting [2025-09-23 16:21:31.604] INIT: Entering runlevel: 5 [2025-09-23 16:21:31.764] mtd28 attached [2025-09-23 16:21:31.764] mtd32 attached [2025-09-23 16:21:31.780] mtd24 attached [2025-09-23 16:21:31.796] ubi0:animations is mounted. [2025-09-23 16:21:31.919] RTNETLINK answers: File exists [2025-09-23 16:21:31.919] ubi1:dml_code is mounted. [2025-09-23 16:21:31.920] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:21:31.920] ubi2:textures is mounted. [2025-09-23 16:21:31.920] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:21:31.920] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:21:31.920] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:21:31.920] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:21:31.920] data.LB_FadeInType0=100 [2025-09-23 16:21:31.920] data.CHLH_FadeInType0=0 [2025-09-23 16:21:31.920] data.WU_FadeInDelay=0 [2025-09-23 16:21:31.920] max_time_out=0 [2025-09-23 16:21:31.920] No splash screen [2025-09-23 16:21:31.920] stop dss Done [2025-09-23 16:21:31.979] /dev/mem opened. [2025-09-23 16:21:31.979] Memory mapped at address 0xffffa374f000. [2025-09-23 16:21:31.979] Read at address 0x00600018 (0xffffa374f018): 0x00000000 [2025-09-23 16:21:31.979] Write at address 0x00600018 (0xffffa374f018): 0x00400040, readback 0x00400040 [2025-09-23 16:21:31.979] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:21:31.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:21:32.219] Waiting data available... [2025-09-23 16:21:32.235] Loaded PowerVR consumer services. [2025-09-23 16:21:32.267] 512+0 records in [2025-09-23 16:21:32.267] 512+0 records out [2025-09-23 16:21:32.299] Starting syslogd/klogd: done [2025-09-23 16:21:32.314] DML Start [2025-09-23 16:21:32.490] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:21:32.920] DML res1: 0 [2025-09-23 16:21:33.215] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:21:33.215] Read Success [2025-09-23 16:21:33.215] Verifying certificate... [2025-09-23 16:21:33.439] Verified OK [2025-09-23 16:21:33.471] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:21:35.164] Verified OK [2025-09-23 16:21:35.164] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:21:35.795] Verified OK [2025-09-23 16:21:35.795] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:21:38.416] fs.protected_hardlinks = 1 [2025-09-23 16:21:38.432] fs.protected_symlinks = 1 [2025-09-23 16:21:38.432] kernel.modules_disabled = 1 [2025-09-23 16:21:38.640] [2025-09-23 16:21:38.640] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:21:39.743] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:21:47.521] SBL1:1210.0.1.0 [2025-09-23 16:21:47.553] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:21:49.137] SBL2:1210.0.1.0 [2025-09-23 16:21:49.184] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:21:49.280] j-A [2025-09-23 16:21:56.635] The R5 Autosar Classic is running [2025-09-23 16:21:56.659] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:21:56.659] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:21:57.266] INIT: version 2.96 booting [2025-09-23 16:21:57.659] INIT: Entering runlevel: 5 [2025-09-23 16:21:57.659] mtd28 attached [2025-09-23 16:21:57.659] mtd24 attached [2025-09-23 16:21:57.659] mtd32 attached [2025-09-23 16:21:57.659] ubi0:animations is mounted. [2025-09-23 16:21:57.659] ubi1:textures is mounted. [2025-09-23 16:21:57.659] RTNETLINK answers: File exists [2025-09-23 16:21:57.659] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:21:57.659] ubi2:dml_code is mounted. [2025-09-23 16:21:57.659] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:21:57.659] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:21:57.659] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:21:57.659] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:21:57.659] data.LB_FadeInType0=100 [2025-09-23 16:21:57.659] data.CHLH_FadeInType0=0 [2025-09-23 16:21:57.659] data.WU_FadeInDelay=0 [2025-09-23 16:21:57.659] max_time_out=0 [2025-09-23 16:21:57.659] No splash screen [2025-09-23 16:21:57.659] stop dss Done [2025-09-23 16:21:57.733] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:21:57.733] /dev/mem opened. [2025-09-23 16:21:57.733] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:21:57.733] Memory mapped at address 0xffff98ec5000. [2025-09-23 16:21:57.733] Read at address 0x00600018 (0xffff98ec5018): 0x00000000 [2025-09-23 16:21:57.733] Write at address 0x00600018 (0xffff98ec5018): 0x00400040, readback 0x00400040 [2025-09-23 16:21:57.861] Loaded PowerVR consumer services. [2025-09-23 16:21:58.021] Waiting data available... [2025-09-23 16:21:58.037] 512+0 records in [2025-09-23 16:21:58.037] 512+0 records out [2025-09-23 16:21:58.085] Starting syslogd/klogd: done [2025-09-23 16:21:58.101] DML Start [2025-09-23 16:21:58.261] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:21:58.533] DML res1: 0 [2025-09-23 16:21:58.911] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:21:58.911] Read Success [2025-09-23 16:21:58.911] Verifying certificate... [2025-09-23 16:21:59.166] Verified OK [2025-09-23 16:21:59.182] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:22:00.666] Verified OK [2025-09-23 16:22:00.666] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:22:01.321] Verified OK [2025-09-23 16:22:01.321] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:22:04.133] fs.protected_hardlinks = 1 [2025-09-23 16:22:04.149] fs.protected_symlinks = 1 [2025-09-23 16:22:04.149] kernel.modules_disabled = 1 [2025-09-23 16:22:04.341] [2025-09-23 16:22:04.341] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:22:05.626] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:22:13.265] SBL1:1210.0.1.0 [2025-09-23 16:22:13.296] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:22:14.880] SBL2:1210.0.1.0 [2025-09-23 16:22:14.928] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:22:15.024] j-A [2025-09-23 16:22:22.380] The R5 Autosar Classic is running [2025-09-23 16:22:22.403] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:22:22.403] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:22:23.010] INIT: version 2.96 booting [2025-09-23 16:22:23.429] INIT: Entering runlevel: 5 [2025-09-23 16:22:23.429] mtd24 attached [2025-09-23 16:22:23.429] mtd28 attached [2025-09-23 16:22:23.429] mtd32 attached [2025-09-23 16:22:23.429] ubi0:textures is mounted. [2025-09-23 16:22:23.429] RTNETLINK answers: File exists [2025-09-23 16:22:23.429] ubi1:animations is mounted. [2025-09-23 16:22:23.429] ubi2:dml_code is mounted. [2025-09-23 16:22:23.429] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:22:23.429] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:22:23.429] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:22:23.429] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:22:23.429] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:22:23.429] data.LB_FadeInType0=100 [2025-09-23 16:22:23.429] data.CHLH_FadeInType0=0 [2025-09-23 16:22:23.429] data.WU_FadeInDelay=0 [2025-09-23 16:22:23.429] max_time_out=0 [2025-09-23 16:22:23.429] No splash screen [2025-09-23 16:22:23.429] stop dss Done [2025-09-23 16:22:23.484] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:22:23.484] /dev/mem opened. [2025-09-23 16:22:23.484] Memory mapped at address 0xffffaeb64000. [2025-09-23 16:22:23.484] Read at address 0x00600018 (0xffffaeb64018): 0x00000000 [2025-09-23 16:22:23.484] Write at address 0x00600018 (0xffffaeb64018): 0x00400040, readback 0x00400040 [2025-09-23 16:22:23.484] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:22:23.677] Loaded PowerVR consumer services. [2025-09-23 16:22:23.772] Waiting data available... [2025-09-23 16:22:23.789] 512+0 records in [2025-09-23 16:22:23.805] 512+0 records out [2025-09-23 16:22:23.821] Starting syslogd/klogd: done [2025-09-23 16:22:23.837] DML Start [2025-09-23 16:22:24.012] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:22:24.188] DML res1: 0 [2025-09-23 16:22:24.711] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:22:24.711] Read Success [2025-09-23 16:22:24.711] Verifying certificate... [2025-09-23 16:22:24.998] Verified OK [2025-09-23 16:22:25.030] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:22:26.719] Verified OK [2025-09-23 16:22:26.719] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:22:27.273] Verified OK [2025-09-23 16:22:27.273] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:22:29.845] fs.protected_hardlinks = 1 [2025-09-23 16:22:29.862] fs.protected_symlinks = 1 [2025-09-23 16:22:29.862] kernel.modules_disabled = 1 [2025-09-23 16:22:30.069] [2025-09-23 16:22:30.069] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:22:31.251] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:22:39.021] SBL1:1210.0.1.0 [2025-09-23 16:22:39.053] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:22:40.635] SBL2:1210.0.1.0 [2025-09-23 16:22:40.667] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:22:40.779] j-A [2025-09-23 16:22:48.155] The R5 Autosar Classic is running [2025-09-23 16:22:48.155] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:22:48.155] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:22:48.762] INIT: version 2.96 booting [2025-09-23 16:22:48.874] INIT: Entering runlevel: 5 [2025-09-23 16:22:49.214] mtd32 attached [2025-09-23 16:22:49.214] mtd24 attached [2025-09-23 16:22:49.214] mtd28 attached [2025-09-23 16:22:49.214] ubi0:dml_code is mounted. [2025-09-23 16:22:49.214] RTNETLINK answers: File exists [2025-09-23 16:22:49.214] ubi1:textures is mounted. [2025-09-23 16:22:49.214] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:22:49.214] ubi2:animations is mounted. [2025-09-23 16:22:49.214] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:22:49.214] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:22:49.214] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:22:49.214] data.LB_FadeInType0=100 [2025-09-23 16:22:49.214] data.CHLH_FadeInType0=0 [2025-09-23 16:22:49.214] data.WU_FadeInDelay=0 [2025-09-23 16:22:49.214] max_time_out=0 [2025-09-23 16:22:49.214] No splash screen [2025-09-23 16:22:49.214] stop dss Done [2025-09-23 16:22:49.214] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:22:49.232] /dev/mem opened. [2025-09-23 16:22:49.232] Memory mapped at address 0xffffb3838000. [2025-09-23 16:22:49.232] Read at address 0x00600018 (0xffffb3838018): 0x00000000 [2025-09-23 16:22:49.232] Write at address 0x00600018 (0xffffb3838018): 0x00400040, readback 0x00400040 [2025-09-23 16:22:49.248] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:22:49.264] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:22:49.344] Loaded PowerVR consumer services. [2025-09-23 16:22:49.520] Waiting data available... [2025-09-23 16:22:49.536] 512+0 records in [2025-09-23 16:22:49.551] 512+0 records out [2025-09-23 16:22:49.583] Starting syslogd/klogd: done [2025-09-23 16:22:49.599] DML Start [2025-09-23 16:22:49.776] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:22:50.016] DML res1: 0 [2025-09-23 16:22:50.457] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:22:50.457] Read Success [2025-09-23 16:22:50.457] Verifying certificate... [2025-09-23 16:22:50.745] Verified OK [2025-09-23 16:22:50.745] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:22:52.338] Verified OK [2025-09-23 16:22:52.338] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:22:53.026] Verified OK [2025-09-23 16:22:53.026] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:22:55.697] fs.protected_hardlinks = 1 [2025-09-23 16:22:55.697] fs.protected_symlinks = 1 [2025-09-23 16:22:55.698] kernel.modules_disabled = 1 [2025-09-23 16:22:55.903] [2025-09-23 16:22:55.903] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:22:57.049] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:23:04.775] SBL1:1210.0.1.0 [2025-09-23 16:23:04.807] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:23:06.390] SBL2:1210.0.1.0 [2025-09-23 16:23:06.438] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:23:06.535] j-A [2025-09-23 16:23:13.891] The R5 Autosar Classic is running [2025-09-23 16:23:13.913] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:23:13.913] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:23:14.520] INIT: version 2.96 booting [2025-09-23 16:23:14.920] INIT: Entering runlevel: 5 [2025-09-23 16:23:14.920] mtd32 attached [2025-09-23 16:23:14.920] mtd28 attached [2025-09-23 16:23:14.920] mtd24 attached [2025-09-23 16:23:14.920] ubi0:dml_code is mounted. [2025-09-23 16:23:14.920] RTNETLINK answers: File exists [2025-09-23 16:23:14.920] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:23:14.920] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:23:14.920] ubi1:animations is mounted. [2025-09-23 16:23:14.920] ubi2:textures is mounted. [2025-09-23 16:23:14.920] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:23:14.920] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:23:14.920] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:23:14.921] data.LB_FadeInType0=100 [2025-09-23 16:23:14.921] data.CHLH_FadeInType0=0 [2025-09-23 16:23:14.921] data.WU_FadeInDelay=0 [2025-09-23 16:23:14.921] max_time_out=0 [2025-09-23 16:23:14.921] No splash screen [2025-09-23 16:23:14.921] stop dss Done [2025-09-23 16:23:14.937] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:23:14.953] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:23:14.990] /dev/mem opened. [2025-09-23 16:23:14.990] Memory mapped at address 0xffffb6cb0000. [2025-09-23 16:23:14.990] Read at address 0x00600018 (0xffffb6cb0018): 0x00000000 [2025-09-23 16:23:14.990] Write at address 0x00600018 (0xffffb6cb0018): 0x00400040, readback 0x00400040 [2025-09-23 16:23:15.087] Loaded PowerVR consumer services. [2025-09-23 16:23:15.262] Waiting data available... [2025-09-23 16:23:15.294] 512+0 records in [2025-09-23 16:23:15.294] 512+0 records out [2025-09-23 16:23:15.342] Starting syslogd/klogd: done [2025-09-23 16:23:15.358] DML Start [2025-09-23 16:23:15.550] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:23:15.806] DML res1: 0 [2025-09-23 16:23:16.141] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:23:16.467] Read Success [2025-09-23 16:23:16.467] Verifying certificate... [2025-09-23 16:23:16.468] Verified OK [2025-09-23 16:23:16.468] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:23:17.985] Verified OK [2025-09-23 16:23:17.985] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:23:18.601] Verified OK [2025-09-23 16:23:18.601] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:23:21.381] fs.protected_hardlinks = 1 [2025-09-23 16:23:21.397] fs.protected_symlinks = 1 [2025-09-23 16:23:21.397] kernel.modules_disabled = 1 [2025-09-23 16:23:21.605] [2025-09-23 16:23:21.605] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:23:22.794] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:23:30.521] SBL1:1210.0.1.0 [2025-09-23 16:23:30.569] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:23:32.135] SBL2:1210.0.1.0 [2025-09-23 16:23:32.183] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:23:32.296] j-A [2025-09-23 16:23:39.668] The R5 Autosar Classic is running [2025-09-23 16:23:39.668] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:23:39.668] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:23:40.275] INIT: version 2.96 booting [2025-09-23 16:23:40.388] INIT: Entering runlevel: 5 [2025-09-23 16:23:40.705] mtd28 attached [2025-09-23 16:23:40.705] mtd24 attached [2025-09-23 16:23:40.705] mtd32 attached [2025-09-23 16:23:40.705] ubi0:animations is mounted. [2025-09-23 16:23:40.705] RTNETLINK answers: File exists [2025-09-23 16:23:40.705] ubi1:textures is mounted. [2025-09-23 16:23:40.705] ubi2:dml_code is mounted. [2025-09-23 16:23:40.705] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:23:40.705] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:23:40.705] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:23:40.705] data.LB_FadeInType0=100 [2025-09-23 16:23:40.705] data.CHLH_FadeInType0=0 [2025-09-23 16:23:40.705] data.WU_FadeInDelay=0 [2025-09-23 16:23:40.705] max_time_out=0 [2025-09-23 16:23:40.705] No splash screen [2025-09-23 16:23:40.705] stop dss Done [2025-09-23 16:23:40.705] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:23:40.705] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:23:40.740] /dev/mem opened. [2025-09-23 16:23:40.740] Memory mapped at address 0xffff992e9000. [2025-09-23 16:23:40.740] Read at address 0x00600018 (0xffff992e9018): 0x00000000 [2025-09-23 16:23:40.740] Write at address 0x00600018 (0xffff992e9018): 0x00400040, readback 0x00400040 [2025-09-23 16:23:40.755] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:23:40.771] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:23:40.851] Loaded PowerVR consumer services. [2025-09-23 16:23:41.012] Waiting data available... [2025-09-23 16:23:41.043] 512+0 records in [2025-09-23 16:23:41.043] 512+0 records out [2025-09-23 16:23:41.091] Starting syslogd/klogd: done [2025-09-23 16:23:41.107] DML Start [2025-09-23 16:23:41.315] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:23:41.508] DML res1: 0 [2025-09-23 16:23:41.970] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:23:41.970] Read Success [2025-09-23 16:23:41.970] Verifying certificate... [2025-09-23 16:23:42.252] Verified OK [2025-09-23 16:23:42.252] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:23:43.968] Verified OK [2025-09-23 16:23:43.968] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:23:44.502] Verified OK [2025-09-23 16:23:44.502] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:23:47.044] fs.protected_hardlinks = 1 [2025-09-23 16:23:47.044] fs.protected_symlinks = 1 [2025-09-23 16:23:47.079] kernel.modules_disabled = 1 [2025-09-23 16:23:47.252] [2025-09-23 16:23:47.252] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:23:48.526] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:23:56.280] SBL1:1210.0.1.0 [2025-09-23 16:23:56.312] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:23:57.895] SBL2:1210.0.1.0 [2025-09-23 16:23:57.943] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:23:58.039] j-A [2025-09-23 16:24:05.413] The R5 Autosar Classic is running [2025-09-23 16:24:05.417] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:24:05.417] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:24:06.024] INIT: version 2.96 booting [2025-09-23 16:24:06.136] INIT: Entering runlevel: 5 [2025-09-23 16:24:06.296] mtd28 attached [2025-09-23 16:24:06.296] mtd24 attached [2025-09-23 16:24:06.427] mtd32 attached [2025-09-23 16:24:06.427] ubi0:animations is mounted. [2025-09-23 16:24:06.428] ubi1:textures is mounted. [2025-09-23 16:24:06.428] RTNETLINK answers: File exists [2025-09-23 16:24:06.428] ubi2:dml_code is mounted. [2025-09-23 16:24:06.428] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:24:06.428] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:24:06.428] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:24:06.428] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:24:06.428] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:24:06.428] data.LB_FadeInType0=100 [2025-09-23 16:24:06.428] data.CHLH_FadeInType0=0 [2025-09-23 16:24:06.428] data.WU_FadeInDelay=0 [2025-09-23 16:24:06.428] max_time_out=0 [2025-09-23 16:24:06.428] No splash screen [2025-09-23 16:24:06.428] stop dss Done [2025-09-23 16:24:06.491] /dev/mem opened. [2025-09-23 16:24:06.491] Memory mapped at address 0xffff9dd16000. [2025-09-23 16:24:06.491] Read at address 0x00600018 (0xffff9dd16018): 0x00000000 [2025-09-23 16:24:06.491] Write at address 0x00600018 (0xffff9dd16018): 0x00400040, readback 0x00400040 [2025-09-23 16:24:06.491] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:24:06.491] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:24:06.636] Loaded PowerVR consumer services. [2025-09-23 16:24:06.763] Waiting data available... [2025-09-23 16:24:06.780] 512+0 records in [2025-09-23 16:24:06.780] 512+0 records out [2025-09-23 16:24:06.811] Starting syslogd/klogd: done [2025-09-23 16:24:06.827] DML Start [2025-09-23 16:24:07.004] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:24:07.211] DML res1: 0 [2025-09-23 16:24:07.674] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:24:07.674] Read Success [2025-09-23 16:24:07.674] Verifying certificate... [2025-09-23 16:24:07.898] Verified OK [2025-09-23 16:24:07.914] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:24:09.584] Verified OK [2025-09-23 16:24:09.584] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:24:10.203] Verified OK [2025-09-23 16:24:10.203] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:24:12.889] fs.protected_hardlinks = 1 [2025-09-23 16:24:12.905] fs.protected_symlinks = 1 [2025-09-23 16:24:12.905] kernel.modules_disabled = 1 [2025-09-23 16:24:13.097] [2025-09-23 16:24:13.097] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:24:14.239] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:24:22.068] SBL1:1210.0.1.0 [2025-09-23 16:24:22.116] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:24:23.683] SBL2:1210.0.1.0 [2025-09-23 16:24:23.731] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:24:23.827] j-A [2025-09-23 16:24:31.181] The R5 Autosar Classic is running [2025-09-23 16:24:31.206] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:24:31.206] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:24:31.814] INIT: version 2.96 booting [2025-09-23 16:24:32.226] INIT: Entering runlevel: 5 [2025-09-23 16:24:32.226] mtd24 attached [2025-09-23 16:24:32.226] mtd28 attached [2025-09-23 16:24:32.226] mtd32 attached [2025-09-23 16:24:32.226] RTNETLINK answers: File exists [2025-09-23 16:24:32.226] ubi0:textures is mounted. [2025-09-23 16:24:32.226] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:24:32.226] ubi1:animations is mounted. [2025-09-23 16:24:32.226] ubi2:dml_code is mounted. [2025-09-23 16:24:32.226] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:24:32.226] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:24:32.226] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:24:32.226] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:24:32.226] data.LB_FadeInType0=100 [2025-09-23 16:24:32.226] data.CHLH_FadeInType0=0 [2025-09-23 16:24:32.226] data.WU_FadeInDelay=0 [2025-09-23 16:24:32.226] max_time_out=0 [2025-09-23 16:24:32.226] No splash screen [2025-09-23 16:24:32.226] stop dss Done [2025-09-23 16:24:32.242] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:24:32.292] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:24:32.292] /dev/mem opened. [2025-09-23 16:24:32.292] Memory mapped at address 0xffff98f5e000. [2025-09-23 16:24:32.292] Read at address 0x00600018 (0xffff98f5e018): 0x00000000 [2025-09-23 16:24:32.292] Write at address 0x00600018 (0xffff98f5e018): 0x00400040, readback 0x00400040 [2025-09-23 16:24:32.356] Loaded PowerVR consumer services. [2025-09-23 16:24:32.548] Waiting data available... [2025-09-23 16:24:32.596] 512+0 records in [2025-09-23 16:24:32.596] 512+0 records out [2025-09-23 16:24:32.628] Starting syslogd/klogd: done [2025-09-23 16:24:32.644] DML Start [2025-09-23 16:24:32.805] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:24:33.227] DML res1: 0 [2025-09-23 16:24:33.476] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:24:33.492] Read Success [2025-09-23 16:24:33.492] Verifying certificate... [2025-09-23 16:24:33.747] Verified OK [2025-09-23 16:24:33.763] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:24:35.433] Verified OK [2025-09-23 16:24:35.433] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:24:35.977] Verified OK [2025-09-23 16:24:35.977] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:24:38.663] fs.protected_hardlinks = 1 [2025-09-23 16:24:38.679] fs.protected_symlinks = 1 [2025-09-23 16:24:38.679] kernel.modules_disabled = 1 [2025-09-23 16:24:38.871] [2025-09-23 16:24:38.871] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:24:40.077] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:24:47.894] SBL1:1210.0.1.0 [2025-09-23 16:24:47.942] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:24:49.509] SBL2:1210.0.1.0 [2025-09-23 16:24:49.557] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 16:24:49.668] j-A [2025-09-23 16:24:57.043] The R5 Autosar Classic is running [2025-09-23 16:24:57.043] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:24:57.043] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:24:57.650] INIT: version 2.96 booting [2025-09-23 16:24:58.105] INIT: Entering runlevel: 5 [2025-09-23 16:24:58.105] mtd28 attached [2025-09-23 16:24:58.105] mtd32 attached [2025-09-23 16:24:58.105] mtd24 attached [2025-09-23 16:24:58.105] ubi0:animations is mounted. [2025-09-23 16:24:58.105] RTNETLINK answers: File exists [2025-09-23 16:24:58.105] ubi1:dml_code is mounted. [2025-09-23 16:24:58.105] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:24:58.105] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:24:58.105] ubi2:textures is mounted. [2025-09-23 16:24:58.105] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:24:58.105] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:24:58.105] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:24:58.105] data.LB_FadeInType0=100 [2025-09-23 16:24:58.105] data.CHLH_FadeInType0=0 [2025-09-23 16:24:58.105] data.WU_FadeInDelay=0 [2025-09-23 16:24:58.105] max_time_out=0 [2025-09-23 16:24:58.105] No splash screen [2025-09-23 16:24:58.105] stop dss Done [2025-09-23 16:24:58.105] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:24:58.105] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:24:58.117] /dev/mem opened. [2025-09-23 16:24:58.117] Memory mapped at address 0xffffaa943000. [2025-09-23 16:24:58.117] Read at address 0x00600018 (0xffffaa943018): 0x00000000 [2025-09-23 16:24:58.117] Write at address 0x00600018 (0xffffaa943018): 0x00400040, readback 0x00400040 [2025-09-23 16:24:58.292] Loaded PowerVR consumer services. [2025-09-23 16:24:58.405] Waiting data available... [2025-09-23 16:24:58.421] 512+0 records in [2025-09-23 16:24:58.421] 512+0 records out [2025-09-23 16:24:58.469] Starting syslogd/klogd: done [2025-09-23 16:24:58.485] DML Start [2025-09-23 16:24:58.661] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:24:58.836] DML res1: 0 [2025-09-23 16:24:59.268] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:24:59.289] Read Success [2025-09-23 16:24:59.289] Verifying certificate... [2025-09-23 16:24:59.497] Verified OK [2025-09-23 16:24:59.513] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:25:01.208] Verified OK [2025-09-23 16:25:01.242] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:25:01.832] Verified OK [2025-09-23 16:25:01.832] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:25:04.374] fs.protected_hardlinks = 1 [2025-09-23 16:25:04.374] fs.protected_symlinks = 1 [2025-09-23 16:25:04.404] kernel.modules_disabled = 1 [2025-09-23 16:25:04.582] [2025-09-23 16:25:04.582] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:25:05.904] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:25:13.664] SBL1:1210.0.1.0 [2025-09-23 16:25:13.712] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:25:15.279] SBL2:1210.0.1.0 [2025-09-23 16:25:15.326] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:25:15.439] j-A [2025-09-23 16:25:22.809] The R5 Autosar Classic is running [2025-09-23 16:25:22.809] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:25:22.809] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:25:23.417] INIT: version 2.96 booting [2025-09-23 16:25:23.528] INIT: Entering runlevel: 5 [2025-09-23 16:25:23.843] mtd24 attached [2025-09-23 16:25:23.843] mtd28 attached [2025-09-23 16:25:23.843] ubi0:textures is mounted. [2025-09-23 16:25:23.843] mtd32 attached [2025-09-23 16:25:23.843] ubi1:animations is mounted. [2025-09-23 16:25:23.843] RTNETLINK answers: File exists [2025-09-23 16:25:23.843] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:25:23.843] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:25:23.843] ubi2:dml_code is mounted. [2025-09-23 16:25:23.843] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:25:23.843] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:25:23.843] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:25:23.843] data.LB_FadeInType0=100 [2025-09-23 16:25:23.843] data.CHLH_FadeInType0=0 [2025-09-23 16:25:23.843] data.WU_FadeInDelay=0 [2025-09-23 16:25:23.843] max_time_out=0 [2025-09-23 16:25:23.843] No splash screen [2025-09-23 16:25:23.843] stop dss Done [2025-09-23 16:25:23.850] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:25:23.850] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:25:23.885] /dev/mem opened. [2025-09-23 16:25:23.885] Memory mapped at address 0xffff9f1a2000. [2025-09-23 16:25:23.885] Read at address 0x00600018 (0xffff9f1a2018): 0x00000000 [2025-09-23 16:25:23.885] Write at address 0x00600018 (0xffff9f1a2018): 0x00400040, readback 0x00400040 [2025-09-23 16:25:24.045] Loaded PowerVR consumer services. [2025-09-23 16:25:24.173] Waiting data available... [2025-09-23 16:25:24.188] 512+0 records in [2025-09-23 16:25:24.188] 512+0 records out [2025-09-23 16:25:24.221] Starting syslogd/klogd: done [2025-09-23 16:25:24.253] DML Start [2025-09-23 16:25:24.413] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:25:24.684] DML res1: 0 [2025-09-23 16:25:25.019] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:25:25.019] Read Success [2025-09-23 16:25:25.019] Verifying certificate... [2025-09-23 16:25:25.226] Verified OK [2025-09-23 16:25:25.242] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:25:26.728] Verified OK [2025-09-23 16:25:26.728] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:25:27.347] Verified OK [2025-09-23 16:25:27.347] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:25:30.209] fs.protected_hardlinks = 1 [2025-09-23 16:25:30.209] fs.protected_symlinks = 1 [2025-09-23 16:25:30.225] kernel.modules_disabled = 1 [2025-09-23 16:25:30.401] [2025-09-23 16:25:30.401] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:25:31.720] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:25:39.449] SBL1:1210.0.1.0 [2025-09-23 16:25:39.497] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:25:41.063] SBL2:1210.0.1.0 [2025-09-23 16:25:41.112] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:25:41.223] j-A [2025-09-23 16:25:48.561] The R5 Autosar Classic is running [2025-09-23 16:25:48.586] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:25:48.586] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:25:49.194] INIT: version 2.96 booting [2025-09-23 16:25:49.306] INIT: Entering runlevel: 5 [2025-09-23 16:25:49.612] mtd28 attached [2025-09-23 16:25:49.612] mtd24 attached [2025-09-23 16:25:49.612] mtd32 attached [2025-09-23 16:25:49.612] ubi0:animations is mounted. [2025-09-23 16:25:49.612] ubi1:textures is mounted. [2025-09-23 16:25:49.612] RTNETLINK answers: File exists [2025-09-23 16:25:49.612] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:25:49.612] ubi2:dml_code is mounted. [2025-09-23 16:25:49.612] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:25:49.612] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:25:49.612] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:25:49.612] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:25:49.612] data.LB_FadeInType0=100 [2025-09-23 16:25:49.612] data.CHLH_FadeInType0=0 [2025-09-23 16:25:49.612] data.WU_FadeInDelay=0 [2025-09-23 16:25:49.612] max_time_out=0 [2025-09-23 16:25:49.612] No splash screen [2025-09-23 16:25:49.612] stop dss Done [2025-09-23 16:25:49.644] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:25:49.676] /dev/mem opened. [2025-09-23 16:25:49.676] Memory mapped at address 0xffffa220f000. [2025-09-23 16:25:49.676] Read at address 0x00600018 (0xffffa220f018): 0x00000000 [2025-09-23 16:25:49.676] Write at address 0x00600018 (0xffffa220f018): 0x00400040, readback 0x00400040 [2025-09-23 16:25:49.676] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:25:49.739] Loaded PowerVR consumer services. [2025-09-23 16:25:49.931] Waiting data available... [2025-09-23 16:25:49.964] 512+0 records in [2025-09-23 16:25:49.964] 512+0 records out [2025-09-23 16:25:49.980] Starting syslogd/klogd: done [2025-09-23 16:25:49.996] DML Start [2025-09-23 16:25:50.187] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:25:50.620] DML res1: 0 [2025-09-23 16:25:50.823] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:25:50.823] Read Success [2025-09-23 16:25:50.823] Verifying certificate... [2025-09-23 16:25:51.031] Verified OK [2025-09-23 16:25:51.048] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:25:52.733] Verified OK [2025-09-23 16:25:52.733] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:25:53.334] Verified OK [2025-09-23 16:25:53.334] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:25:55.908] fs.protected_hardlinks = 1 [2025-09-23 16:25:55.923] fs.protected_symlinks = 1 [2025-09-23 16:25:55.923] kernel.modules_disabled = 1 [2025-09-23 16:25:56.132] [2025-09-23 16:25:56.132] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:25:57.437] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:26:05.180] SBL1:1210.0.1.0 [2025-09-23 16:26:05.228] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:26:06.795] SBL2:1210.0.1.0 [2025-09-23 16:26:06.843] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 16:26:06.955] j-A [2025-09-23 16:26:14.328] The R5 Autosar Classic is running [2025-09-23 16:26:14.328] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:26:14.328] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:26:14.936] INIT: version 2.96 booting [2025-09-23 16:26:15.048] INIT: Entering runlevel: 5 [2025-09-23 16:26:15.208] mtd24 attached [2025-09-23 16:26:15.224] mtd28 attached [2025-09-23 16:26:15.224] mtd32 attached [2025-09-23 16:26:15.255] ubi0:textures is mounted. [2025-09-23 16:26:15.379] RTNETLINK answers: File exists [2025-09-23 16:26:15.379] ubi2:dml_code is mounted. [2025-09-23 16:26:15.379] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:26:15.379] ubi1:animations is mounted. [2025-09-23 16:26:15.379] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:26:15.379] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:26:15.379] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:26:15.379] data.LB_FadeInType0=100 [2025-09-23 16:26:15.379] data.CHLH_FadeInType0=0 [2025-09-23 16:26:15.379] data.WU_FadeInDelay=0 [2025-09-23 16:26:15.379] max_time_out=0 [2025-09-23 16:26:15.379] No splash screen [2025-09-23 16:26:15.379] stop dss Done [2025-09-23 16:26:15.379] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:26:15.379] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:26:15.410] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:26:15.410] /dev/mem opened. [2025-09-23 16:26:15.410] Memory mapped at address 0xffff896fd000. [2025-09-23 16:26:15.410] Read at address 0x00600018 (0xffff896fd018): 0x00000000 [2025-09-23 16:26:15.410] Write at address 0x00600018 (0xffff896fd018): 0x00400040, readback 0x00400040 [2025-09-23 16:26:15.554] Loaded PowerVR consumer services. [2025-09-23 16:26:15.697] Waiting data available... [2025-09-23 16:26:15.729] 512+0 records in [2025-09-23 16:26:15.745] 512+0 records out [2025-09-23 16:26:15.762] Starting syslogd/klogd: done [2025-09-23 16:26:15.778] DML Start [2025-09-23 16:26:15.937] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:26:16.194] DML res1: 0 [2025-09-23 16:26:16.664] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:26:16.664] Read Success [2025-09-23 16:26:16.664] Verifying certificate... [2025-09-23 16:26:16.904] Verified OK [2025-09-23 16:26:16.935] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:26:18.643] Verified OK [2025-09-23 16:26:18.643] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:26:19.213] Verified OK [2025-09-23 16:26:19.213] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:26:21.787] fs.protected_hardlinks = 1 [2025-09-23 16:26:21.787] fs.protected_symlinks = 1 [2025-09-23 16:26:21.803] kernel.modules_disabled = 1 [2025-09-23 16:26:22.011] [2025-09-23 16:26:22.011] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:26:23.204] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:26:30.945] SBL1:1210.0.1.0 [2025-09-23 16:26:30.993] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:26:32.561] SBL2:1210.0.1.0 [2025-09-23 16:26:32.609] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:26:32.704] j-A [2025-09-23 16:26:40.058] The R5 Autosar Classic is running [2025-09-23 16:26:40.083] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:26:40.083] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:26:40.690] INIT: version 2.96 booting [2025-09-23 16:26:40.802] INIT: Entering runlevel: 5 [2025-09-23 16:26:41.102] mtd28 attached [2025-09-23 16:26:41.102] mtd32 attached [2025-09-23 16:26:41.102] mtd24 attached [2025-09-23 16:26:41.102] ubi0:animations is mounted. [2025-09-23 16:26:41.102] RTNETLINK answers: File exists [2025-09-23 16:26:41.102] ubi2:textures is mounted. [2025-09-23 16:26:41.102] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:26:41.102] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:26:41.102] ubi1:dml_code is mounted. [2025-09-23 16:26:41.102] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:26:41.102] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:26:41.102] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:26:41.102] data.LB_FadeInType0=100 [2025-09-23 16:26:41.102] data.CHLH_FadeInType0=0 [2025-09-23 16:26:41.102] data.WU_FadeInDelay=0 [2025-09-23 16:26:41.102] max_time_out=0 [2025-09-23 16:26:41.102] No splash screen [2025-09-23 16:26:41.102] stop dss Done [2025-09-23 16:26:41.130] /dev/mem opened. [2025-09-23 16:26:41.130] Memory mapped at address 0xffff8bfb8000. [2025-09-23 16:26:41.156] Read at address 0x00600018 (0xffff8bfb8018): 0x00000000 [2025-09-23 16:26:41.156] Write at address 0x00600018 (0xffff8bfb8018): 0x00400040, readback 0x00400040 [2025-09-23 16:26:41.156] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:26:41.188] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:26:41.347] Loaded PowerVR consumer services. [2025-09-23 16:26:41.444] Waiting data available... [2025-09-23 16:26:41.476] 512+0 records in [2025-09-23 16:26:41.476] 512+0 records out [2025-09-23 16:26:41.508] Starting syslogd/klogd: done [2025-09-23 16:26:41.524] DML Start [2025-09-23 16:26:41.716] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:26:41.908] DML res1: 0 [2025-09-23 16:26:42.338] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:26:42.338] Read Success [2025-09-23 16:26:42.338] Verifying certificate... [2025-09-23 16:26:42.648] Verified OK [2025-09-23 16:26:42.648] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:26:44.143] Verified OK [2025-09-23 16:26:44.143] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:26:44.694] Verified OK [2025-09-23 16:26:44.694] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:26:47.476] fs.protected_hardlinks = 1 [2025-09-23 16:26:47.511] fs.protected_symlinks = 1 [2025-09-23 16:26:47.511] kernel.modules_disabled = 1 [2025-09-23 16:26:47.681] [2025-09-23 16:26:47.681] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:26:48.944] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:26:56.700] SBL1:1210.0.1.0 [2025-09-23 16:26:56.732] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 16:26:58.314] SBL2:1210.0.1.0 [2025-09-23 16:26:58.362] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:26:58.459] j-A [2025-09-23 16:27:05.812] The R5 Autosar Classic is running [2025-09-23 16:27:05.835] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:27:05.835] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:27:06.443] INIT: version 2.96 booting [2025-09-23 16:27:06.554] INIT: Entering runlevel: 5 [2025-09-23 16:27:06.714] mtd28 attached [2025-09-23 16:27:06.714] mtd24 attached [2025-09-23 16:27:06.730] mtd32 attached [2025-09-23 16:27:06.778] ubi0:animations is mounted. [2025-09-23 16:27:06.778] RTNETLINK answers: File exists [2025-09-23 16:27:06.869] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:27:06.869] ubi2:dml_code is mounted. [2025-09-23 16:27:06.869] ubi1:textures is mounted. [2025-09-23 16:27:06.869] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:27:06.869] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:27:06.869] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:27:06.869] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:27:06.870] data.LB_FadeInType0=100 [2025-09-23 16:27:06.870] data.CHLH_FadeInType0=0 [2025-09-23 16:27:06.870] data.WU_FadeInDelay=0 [2025-09-23 16:27:06.870] max_time_out=0 [2025-09-23 16:27:06.870] No splash screen [2025-09-23 16:27:06.870] stop dss Done [2025-09-23 16:27:06.918] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:27:06.918] /dev/mem opened. [2025-09-23 16:27:06.918] Memory mapped at address 0xffff9ebd4000. [2025-09-23 16:27:06.918] Read at address 0x00600018 (0xffff9ebd4018): 0x00000000 [2025-09-23 16:27:06.918] Write at address 0x00600018 (0xffff9ebd4018): 0x00400040, readback 0x00400040 [2025-09-23 16:27:06.918] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:27:07.111] Loaded PowerVR consumer services. [2025-09-23 16:27:07.206] Waiting data available... [2025-09-23 16:27:07.238] 512+0 records in [2025-09-23 16:27:07.238] 512+0 records out [2025-09-23 16:27:07.270] Starting syslogd/klogd: done [2025-09-23 16:27:07.286] DML Start [2025-09-23 16:27:07.477] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:27:07.870] DML res1: 0 [2025-09-23 16:27:08.081] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:27:08.081] Read Success [2025-09-23 16:27:08.081] Verifying certificate... [2025-09-23 16:27:08.305] Verified OK [2025-09-23 16:27:08.305] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:27:09.877] Verified OK [2025-09-23 16:27:09.877] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:27:10.452] Verified OK [2025-09-23 16:27:10.452] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:27:13.362] fs.protected_hardlinks = 1 [2025-09-23 16:27:13.378] fs.protected_symlinks = 1 [2025-09-23 16:27:13.378] kernel.modules_disabled = 1 [2025-09-23 16:27:13.569] [2025-09-23 16:27:13.569] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:27:14.724] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:27:22.457] SBL1:1210.0.1.0 [2025-09-23 16:27:22.488] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:27:24.072] SBL2:1210.0.1.0 [2025-09-23 16:27:24.120] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 16:27:24.216] j-A [2025-09-23 16:27:31.569] The R5 Autosar Classic is running [2025-09-23 16:27:31.593] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:27:31.593] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:27:32.201] INIT: version 2.96 booting [2025-09-23 16:27:32.623] INIT: Entering runlevel: 5 [2025-09-23 16:27:32.623] mtd24 attached [2025-09-23 16:27:32.623] mtd28 attached [2025-09-23 16:27:32.623] mtd32 attached [2025-09-23 16:27:32.623] RTNETLINK answers: File exists [2025-09-23 16:27:32.623] ubi0:textures is mounted. [2025-09-23 16:27:32.623] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:27:32.623] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:27:32.623] ubi1:animations is mounted. [2025-09-23 16:27:32.623] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:27:32.623] ubi2:dml_code is mounted. [2025-09-23 16:27:32.623] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:27:32.623] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:27:32.623] data.LB_FadeInType0=100 [2025-09-23 16:27:32.623] data.CHLH_FadeInType0=0 [2025-09-23 16:27:32.623] data.WU_FadeInDelay=0 [2025-09-23 16:27:32.623] max_time_out=0 [2025-09-23 16:27:32.623] No splash screen [2025-09-23 16:27:32.623] stop dss Done [2025-09-23 16:27:32.655] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:27:32.655] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:27:32.687] /dev/mem opened. [2025-09-23 16:27:32.687] Memory mapped at address 0xffff9351d000. [2025-09-23 16:27:32.687] Read at address 0x00600018 (0xffff9351d018): 0x00000000 [2025-09-23 16:27:32.687] Write at address 0x00600018 (0xffff9351d018): 0x00400040, readback 0x00400040 [2025-09-23 16:27:32.798] Loaded PowerVR consumer services. [2025-09-23 16:27:32.959] Waiting data available... [2025-09-23 16:27:32.974] 512+0 records in [2025-09-23 16:27:32.990] 512+0 records out [2025-09-23 16:27:33.006] Starting syslogd/klogd: done [2025-09-23 16:27:33.022] DML Start [2025-09-23 16:27:33.230] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:27:33.623] DML res1: 0 [2025-09-23 16:27:33.790] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:27:33.811] Read Success [2025-09-23 16:27:33.811] Verifying certificate... [2025-09-23 16:27:34.082] Verified OK [2025-09-23 16:27:34.098] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:27:35.615] Verified OK [2025-09-23 16:27:35.615] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:27:36.255] Verified OK [2025-09-23 16:27:36.255] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:27:39.036] fs.protected_hardlinks = 1 [2025-09-23 16:27:39.036] fs.protected_symlinks = 1 [2025-09-23 16:27:39.052] kernel.modules_disabled = 1 [2025-09-23 16:27:39.244] [2025-09-23 16:27:39.244] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:27:40.523] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:27:48.215] SBL1:1210.0.1.0 [2025-09-23 16:27:48.263] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:27:49.829] SBL2:1210.0.1.0 [2025-09-23 16:27:49.878] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:27:49.973] j-A [2025-09-23 16:27:57.327] The R5 Autosar Classic is running [2025-09-23 16:27:57.352] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:27:57.352] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:27:57.960] INIT: version 2.96 booting [2025-09-23 16:27:58.375] INIT: Entering runlevel: 5 [2025-09-23 16:27:58.375] mtd28 attached [2025-09-23 16:27:58.375] mtd32 attached [2025-09-23 16:27:58.375] mtd24 attached [2025-09-23 16:27:58.375] ubi0:animations is mounted. [2025-09-23 16:27:58.375] RTNETLINK answers: File exists [2025-09-23 16:27:58.375] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:27:58.375] ubi1:dml_code is mounted. [2025-09-23 16:27:58.375] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:27:58.375] ubi2:textures is mounted. [2025-09-23 16:27:58.375] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:27:58.375] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:27:58.375] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:27:58.375] data.LB_FadeInType0=100 [2025-09-23 16:27:58.375] data.CHLH_FadeInType0=0 [2025-09-23 16:27:58.375] data.WU_FadeInDelay=0 [2025-09-23 16:27:58.375] max_time_out=0 [2025-09-23 16:27:58.375] No splash screen [2025-09-23 16:27:58.375] stop dss Done [2025-09-23 16:27:58.400] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:27:58.400] /dev/mem opened. [2025-09-23 16:27:58.432] Memory mapped at address 0xffff97179000. [2025-09-23 16:27:58.432] Read at address 0x00600018 (0xffff97179018): 0x00000000 [2025-09-23 16:27:58.432] Write at address 0x00600018 (0xffff97179018): 0x00400040, readback 0x00400040 [2025-09-23 16:27:58.432] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:27:58.495] Loaded PowerVR consumer services. [2025-09-23 16:27:58.703] Waiting data available... [2025-09-23 16:27:58.735] 512+0 records in [2025-09-23 16:27:58.735] 512+0 records out [2025-09-23 16:27:58.767] Starting syslogd/klogd: done [2025-09-23 16:27:58.783] DML Start [2025-09-23 16:27:58.943] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:27:59.375] DML res1: 0 [2025-09-23 16:27:59.658] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:27:59.658] Read Success [2025-09-23 16:27:59.658] Verifying certificate... [2025-09-23 16:27:59.913] Verified OK [2025-09-23 16:27:59.945] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:28:01.672] Verified OK [2025-09-23 16:28:01.672] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:28:02.167] Verified OK [2025-09-23 16:28:02.167] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:28:04.565] fs.protected_hardlinks = 1 [2025-09-23 16:28:04.565] fs.protected_symlinks = 1 [2025-09-23 16:28:04.581] kernel.modules_disabled = 1 [2025-09-23 16:28:04.772] [2025-09-23 16:28:04.772] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:28:06.207] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:28:13.984] SBL1:1210.0.1.0 [2025-09-23 16:28:14.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:28:15.599] SBL2:1210.0.1.0 [2025-09-23 16:28:15.647] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:28:15.758] j-A [2025-09-23 16:28:23.132] The R5 Autosar Classic is running [2025-09-23 16:28:23.132] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:28:23.132] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:28:23.740] INIT: version 2.96 booting [2025-09-23 16:28:24.174] INIT: Entering runlevel: 5 [2025-09-23 16:28:24.174] mtd24 attached [2025-09-23 16:28:24.174] mtd28 attached [2025-09-23 16:28:24.174] mtd32 attached [2025-09-23 16:28:24.174] RTNETLINK answers: File exists [2025-09-23 16:28:24.174] ubi2:dml_code is mounted. [2025-09-23 16:28:24.174] ubi0:textures is mounted. [2025-09-23 16:28:24.174] ubi1:animations is mounted. [2025-09-23 16:28:24.174] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:28:24.174] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:28:24.174] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:28:24.174] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:28:24.174] data.LB_FadeInType0=100 [2025-09-23 16:28:24.174] data.CHLH_FadeInType0=0 [2025-09-23 16:28:24.174] data.WU_FadeInDelay=0 [2025-09-23 16:28:24.174] max_time_out=0 [2025-09-23 16:28:24.174] No splash screen [2025-09-23 16:28:24.174] stop dss Done [2025-09-23 16:28:24.174] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:28:24.209] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:28:24.209] /dev/mem opened. [2025-09-23 16:28:24.209] Memory mapped at address 0xffff99cb2000. [2025-09-23 16:28:24.209] Read at address 0x00600018 (0xffff99cb2018): 0x00000000 [2025-09-23 16:28:24.209] Write at address 0x00600018 (0xffff99cb2018): 0x00400040, readback 0x00400040 [2025-09-23 16:28:24.209] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:28:24.321] Loaded PowerVR consumer services. [2025-09-23 16:28:24.497] Waiting data available... [2025-09-23 16:28:24.529] 512+0 records in [2025-09-23 16:28:24.529] 512+0 records out [2025-09-23 16:28:24.545] Starting syslogd/klogd: done [2025-09-23 16:28:24.561] DML Start [2025-09-23 16:28:24.753] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:28:24.945] DML res1: 0 [2025-09-23 16:28:25.390] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:28:25.390] Read Success [2025-09-23 16:28:25.390] Verifying certificate... [2025-09-23 16:28:25.630] Verified OK [2025-09-23 16:28:25.630] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:28:27.436] Verified OK [2025-09-23 16:28:27.436] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:28:27.977] Verified OK [2025-09-23 16:28:27.977] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:28:30.503] fs.protected_hardlinks = 1 [2025-09-23 16:28:30.532] fs.protected_symlinks = 1 [2025-09-23 16:28:30.532] kernel.modules_disabled = 1 [2025-09-23 16:28:30.723] [2025-09-23 16:28:30.723] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:28:32.008] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:28:39.739] SBL1:1210.0.1.0 [2025-09-23 16:28:39.787] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:28:41.354] SBL2:1210.0.1.0 [2025-09-23 16:28:41.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:28:41.514] j-A [2025-09-23 16:28:48.885] The R5 Autosar Classic is running [2025-09-23 16:28:48.885] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:28:48.885] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:28:49.492] INIT: version 2.96 booting [2025-09-23 16:28:49.604] INIT: Entering runlevel: 5 [2025-09-23 16:28:49.928] mtd24 attached [2025-09-23 16:28:49.928] mtd32 attached [2025-09-23 16:28:49.928] mtd28 attached [2025-09-23 16:28:49.928] ubi0:textures is mounted. [2025-09-23 16:28:49.928] ubi1:dml_code is mounted. [2025-09-23 16:28:49.928] RTNETLINK answers: File exists [2025-09-23 16:28:49.928] ubi2:animations is mounted. [2025-09-23 16:28:49.928] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:28:49.928] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:28:49.928] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:28:49.928] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:28:49.928] data.LB_FadeInType0=100 [2025-09-23 16:28:49.928] data.CHLH_FadeInType0=0 [2025-09-23 16:28:49.928] data.WU_FadeInDelay=0 [2025-09-23 16:28:49.928] max_time_out=0 [2025-09-23 16:28:49.928] No splash screen [2025-09-23 16:28:49.928] stop dss Done [2025-09-23 16:28:49.928] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:28:49.928] /dev/mem opened. [2025-09-23 16:28:49.928] Memory mapped at address 0xffff82369000. [2025-09-23 16:28:49.939] Read at address 0x00600018 (0xffff82369018): 0x00000000 [2025-09-23 16:28:49.939] Write at address 0x00600018 (0xffff82369018): 0x00400040, readback 0x00400040 [2025-09-23 16:28:49.955] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:28:49.971] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:28:50.035] Loaded PowerVR consumer services. [2025-09-23 16:28:50.227] Waiting data available... [2025-09-23 16:28:50.275] 512+0 records in [2025-09-23 16:28:50.275] 512+0 records out [2025-09-23 16:28:50.306] Starting syslogd/klogd: done [2025-09-23 16:28:50.322] DML Start [2025-09-23 16:28:50.483] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:28:50.690] DML res1: 0 [2025-09-23 16:28:51.170] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:28:51.473] Read Success [2025-09-23 16:28:51.473] Verifying certificate... [2025-09-23 16:28:51.474] Verified OK [2025-09-23 16:28:51.474] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:28:53.098] Verified OK [2025-09-23 16:28:53.098] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:28:53.639] Verified OK [2025-09-23 16:28:53.639] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:28:56.237] fs.protected_hardlinks = 1 [2025-09-23 16:28:56.246] fs.protected_symlinks = 1 [2025-09-23 16:28:56.246] kernel.modules_disabled = 1 [2025-09-23 16:28:56.454] [2025-09-23 16:28:56.454] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:28:57.748] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:29:05.487] SBL1:1210.0.1.0 [2025-09-23 16:29:05.535] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:29:07.117] SBL2:1210.0.1.0 [2025-09-23 16:29:07.149] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:29:07.261] j-A [2025-09-23 16:29:14.635] The R5 Autosar Classic is running [2025-09-23 16:29:14.635] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:29:14.635] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:29:15.243] INIT: version 2.96 booting [2025-09-23 16:29:15.355] INIT: Entering runlevel: 5 [2025-09-23 16:29:15.679] mtd24 attached [2025-09-23 16:29:15.679] mtd28 attached [2025-09-23 16:29:15.679] mtd32 attached [2025-09-23 16:29:15.679] ubi0:textures is mounted. [2025-09-23 16:29:15.679] ubi1:animations is mounted. [2025-09-23 16:29:15.679] RTNETLINK answers: File exists [2025-09-23 16:29:15.679] ubi2:dml_code is mounted. [2025-09-23 16:29:15.679] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:29:15.679] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:29:15.679] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:29:15.679] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:29:15.679] data.LB_FadeInType0=100 [2025-09-23 16:29:15.679] data.CHLH_FadeInType0=0 [2025-09-23 16:29:15.679] data.WU_FadeInDelay=0 [2025-09-23 16:29:15.679] max_time_out=0 [2025-09-23 16:29:15.679] No splash screen [2025-09-23 16:29:15.679] stop dss Done [2025-09-23 16:29:15.679] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:29:15.735] /dev/mem opened. [2025-09-23 16:29:15.735] Memory mapped at address 0xffff92a1b000. [2025-09-23 16:29:15.735] Read at address 0x00600018 (0xffff92a1b018): 0x00000000 [2025-09-23 16:29:15.735] Write at address 0x00600018 (0xffff92a1b018): 0x00400040, readback 0x00400040 [2025-09-23 16:29:15.735] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:29:15.735] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:29:15.846] Loaded PowerVR consumer services. [2025-09-23 16:29:16.006] Waiting data available... [2025-09-23 16:29:16.023] 512+0 records in [2025-09-23 16:29:16.023] 512+0 records out [2025-09-23 16:29:16.054] Starting syslogd/klogd: done [2025-09-23 16:29:16.070] DML Start [2025-09-23 16:29:16.246] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:29:16.438] DML res1: 0 [2025-09-23 16:29:16.886] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:29:16.901] Read Success [2025-09-23 16:29:16.901] Verifying certificate... [2025-09-23 16:29:17.141] Verified OK [2025-09-23 16:29:17.157] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:29:18.804] Verified OK [2025-09-23 16:29:18.804] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:29:19.475] Verified OK [2025-09-23 16:29:19.496] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:29:22.086] fs.protected_hardlinks = 1 [2025-09-23 16:29:22.102] fs.protected_symlinks = 1 [2025-09-23 16:29:22.102] kernel.modules_disabled = 1 [2025-09-23 16:29:22.310] [2025-09-23 16:29:22.310] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:29:23.503] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:29:31.255] SBL1:1210.0.1.0 [2025-09-23 16:29:31.303] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:29:32.870] SBL2:1210.0.1.0 [2025-09-23 16:29:32.918] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:29:33.029] j-A [2025-09-23 16:29:40.369] The R5 Autosar Classic is running [2025-09-23 16:29:40.394] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:29:40.394] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:29:41.002] INIT: version 2.96 booting [2025-09-23 16:29:41.113] INIT: Entering runlevel: 5 [2025-09-23 16:29:41.416] mtd24 attached [2025-09-23 16:29:41.416] mtd28 attached [2025-09-23 16:29:41.416] mtd32 attached [2025-09-23 16:29:41.416] ubi0:textures is mounted. [2025-09-23 16:29:41.416] RTNETLINK answers: File exists [2025-09-23 16:29:41.416] ubi2:dml_code is mounted. [2025-09-23 16:29:41.416] ubi1:animations is mounted. [2025-09-23 16:29:41.416] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:29:41.416] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:29:41.416] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:29:41.416] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:29:41.416] data.LB_FadeInType0=100 [2025-09-23 16:29:41.416] data.CHLH_FadeInType0=0 [2025-09-23 16:29:41.416] data.WU_FadeInDelay=0 [2025-09-23 16:29:41.416] max_time_out=0 [2025-09-23 16:29:41.416] No splash screen [2025-09-23 16:29:41.416] stop dss Done [2025-09-23 16:29:41.416] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:29:41.483] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:29:41.483] /dev/mem opened. [2025-09-23 16:29:41.483] Memory mapped at address 0xffff7f906000. [2025-09-23 16:29:41.483] Read at address 0x00600018 (0xffff7f906018): 0x00000000 [2025-09-23 16:29:41.483] Write at address 0x00600018 (0xffff7f906018): 0x00400040, readback 0x00400040 [2025-09-23 16:29:41.483] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:29:41.596] Loaded PowerVR consumer services. [2025-09-23 16:29:41.755] Waiting data available... [2025-09-23 16:29:41.787] 512+0 records in [2025-09-23 16:29:41.787] 512+0 records out [2025-09-23 16:29:41.803] Starting syslogd/klogd: done [2025-09-23 16:29:41.835] DML Start [2025-09-23 16:29:42.027] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:29:42.234] DML res1: 0 [2025-09-23 16:29:42.641] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:29:42.641] Read Success [2025-09-23 16:29:42.641] Verifying certificate... [2025-09-23 16:29:42.864] Verified OK [2025-09-23 16:29:42.881] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:29:44.582] Verified OK [2025-09-23 16:29:44.582] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:29:45.185] Verified OK [2025-09-23 16:29:45.185] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:29:47.790] fs.protected_hardlinks = 1 [2025-09-23 16:29:47.806] fs.protected_symlinks = 1 [2025-09-23 16:29:47.806] kernel.modules_disabled = 1 [2025-09-23 16:29:48.014] [2025-09-23 16:29:48.014] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:29:49.271] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:29:57.010] SBL1:1210.0.1.0 [2025-09-23 16:29:57.058] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:29:58.641] SBL2:1210.0.1.0 [2025-09-23 16:29:58.685] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:29:58.785] j-A [2025-09-23 16:30:06.160] The R5 Autosar Classic is running [2025-09-23 16:30:06.160] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:30:06.160] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:30:06.768] INIT: version 2.96 booting [2025-09-23 16:30:06.879] INIT: Entering runlevel: 5 [2025-09-23 16:30:07.184] mtd28 attached [2025-09-23 16:30:07.184] mtd24 attached [2025-09-23 16:30:07.184] mtd32 attached [2025-09-23 16:30:07.184] ubi0:animations is mounted. [2025-09-23 16:30:07.184] RTNETLINK answers: File exists [2025-09-23 16:30:07.184] ubi1:textures is mounted. [2025-09-23 16:30:07.184] ubi2:dml_code is mounted. [2025-09-23 16:30:07.184] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:30:07.184] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:30:07.184] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:30:07.184] data.LB_FadeInType0=100 [2025-09-23 16:30:07.184] data.CHLH_FadeInType0=0 [2025-09-23 16:30:07.184] data.WU_FadeInDelay=0 [2025-09-23 16:30:07.184] max_time_out=0 [2025-09-23 16:30:07.184] No splash screen [2025-09-23 16:30:07.184] stop dss Done [2025-09-23 16:30:07.184] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:30:07.184] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:30:07.221] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:30:07.221] /dev/mem opened. [2025-09-23 16:30:07.221] Memory mapped at address 0xffffa439f000. [2025-09-23 16:30:07.221] Read at address 0x00600018 (0xffffa439f018): 0x00000000 [2025-09-23 16:30:07.221] Write at address 0x00600018 (0xffffa439f018): 0x00400040, readback 0x00400040 [2025-09-23 16:30:07.221] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:30:07.333] Loaded PowerVR consumer services. [2025-09-23 16:30:07.509] Waiting data available... [2025-09-23 16:30:07.557] 512+0 records in [2025-09-23 16:30:07.557] 512+0 records out [2025-09-23 16:30:07.589] Starting syslogd/klogd: done [2025-09-23 16:30:07.605] DML Start [2025-09-23 16:30:07.781] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:30:08.052] DML res1: 0 [2025-09-23 16:30:08.402] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:30:08.402] Read Success [2025-09-23 16:30:08.402] Verifying certificate... [2025-09-23 16:30:08.610] Verified OK [2025-09-23 16:30:08.626] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:30:10.269] Verified OK [2025-09-23 16:30:10.269] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:30:10.922] Verified OK [2025-09-23 16:30:10.922] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:30:11.737] 5498 GC [0] [2025-09-23 16:30:11.816] 5569 GC [1] [2025-09-23 16:30:11.880] 5648 GC [2] [2025-09-23 16:30:11.960] 5720 GC [3] [2025-09-23 16:30:12.024] 5792 GC [4] [2025-09-23 16:30:12.104] 5858 GC [5] [2025-09-23 16:30:12.167] 5932 GC [6] [2025-09-23 16:30:12.231] 6000 GC [7] [2025-09-23 16:30:12.312] 6071 GC [8] [2025-09-23 16:30:12.376] 6139 GC [9] [2025-09-23 16:30:12.455] 6211 GC [10] [2025-09-23 16:30:12.519] 6289 GC [11] [2025-09-23 16:30:12.599] 6351 GC [12] [2025-09-23 16:30:12.856] 6408 GC [13] [2025-09-23 16:30:12.857] 6469 GC [14] [2025-09-23 16:30:12.857] 6527 GC [15] [2025-09-23 16:30:12.857] 6589 GC [16] [2025-09-23 16:30:12.887] 6651 GC [17] [2025-09-23 16:30:12.951] 6708 GC [18] [2025-09-23 16:30:13.015] 6769 GC [19] [2025-09-23 16:30:13.079] 6832 GC [20] [2025-09-23 16:30:13.127] 6890 GC [21] [2025-09-23 16:30:13.207] 6961 GC [22] [2025-09-23 16:30:13.254] 7018 GC [23] [2025-09-23 16:30:13.319] 7081 GC [24] [2025-09-23 16:30:13.383] 7142 GC [25] [2025-09-23 16:30:13.446] 7209 GC [26] [2025-09-23 16:30:13.511] 7271 GC [27] [2025-09-23 16:30:13.527] fs.protected_hardlinks = 1 [2025-09-23 16:30:13.543] fs.protected_symlinks = 1 [2025-09-23 16:30:13.543] kernel.modules_disabled = 1 [2025-09-23 16:30:13.887] 7342 GC [28] [2025-09-23 16:30:13.887] 7438 GC [29] [2025-09-23 16:30:13.887] GC DONE [2025-09-23 16:30:13.887] [2025-09-23 16:30:13.887] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:30:15.039] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:30:22.780] SBL1:1210.0.1.0 [2025-09-23 16:30:22.829] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:30:24.395] SBL2:1210.0.1.0 [2025-09-23 16:30:24.443] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:30:24.539] j-A [2025-09-23 16:30:31.894] The R5 Autosar Classic is running [2025-09-23 16:30:31.916] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:30:31.916] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:30:32.524] INIT: version 2.96 booting [2025-09-23 16:30:32.635] INIT: Entering runlevel: 5 [2025-09-23 16:30:32.795] mtd28 attached [2025-09-23 16:30:32.795] mtd24 attached [2025-09-23 16:30:32.811] mtd32 attached [2025-09-23 16:30:32.843] ubi0:animations is mounted. [2025-09-23 16:30:32.964] ubi1:textures is mounted. [2025-09-23 16:30:32.964] RTNETLINK answers: File exists [2025-09-23 16:30:32.965] ubi2:dml_code is mounted. [2025-09-23 16:30:32.965] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:30:32.965] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:30:32.965] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:30:32.965] data.LB_FadeInType0=100 [2025-09-23 16:30:32.965] data.CHLH_FadeInType0=0 [2025-09-23 16:30:32.965] data.WU_FadeInDelay=0 [2025-09-23 16:30:32.965] max_time_out=0 [2025-09-23 16:30:32.965] No splash screen [2025-09-23 16:30:32.965] stop dss Done [2025-09-23 16:30:32.965] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:30:32.965] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:30:32.965] /dev/mem opened. [2025-09-23 16:30:32.965] Memory mapped at address 0xffff8b328000. [2025-09-23 16:30:32.977] Read at address 0x00600018 (0xffff8b328018): 0x00000000 [2025-09-23 16:30:32.977] Write at address 0x00600018 (0xffff8b328018): 0x00400040, readback 0x00400040 [2025-09-23 16:30:33.009] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:30:33.025] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:30:33.169] Loaded PowerVR consumer services. [2025-09-23 16:30:33.201] 512+0 records in [2025-09-23 16:30:33.201] 512+0 records out [2025-09-23 16:30:33.249] Starting syslogd/klogd: done [2025-09-23 16:30:33.297] Waiting data available... [2025-09-23 16:30:33.297] DML Start [2025-09-23 16:30:33.489] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:30:33.697] DML res1: 0 [2025-09-23 16:30:34.112] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:30:34.129] Read Success [2025-09-23 16:30:34.129] Verifying certificate... [2025-09-23 16:30:34.384] Verified OK [2025-09-23 16:30:34.401] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:30:36.144] Verified OK [2025-09-23 16:30:36.144] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:30:36.730] Verified OK [2025-09-23 16:30:36.730] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:30:39.288] fs.protected_hardlinks = 1 [2025-09-23 16:30:39.288] fs.protected_symlinks = 1 [2025-09-23 16:30:39.303] kernel.modules_disabled = 1 [2025-09-23 16:30:39.496] [2025-09-23 16:30:39.496] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:30:40.745] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:30:48.552] SBL1:1210.0.1.0 [2025-09-23 16:30:48.600] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:30:50.167] SBL2:1210.0.1.0 [2025-09-23 16:30:50.214] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:30:50.310] j-A [2025-09-23 16:30:57.665] The R5 Autosar Classic is running [2025-09-23 16:30:57.687] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:30:57.687] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:30:58.702] INIT: version 2.96 booting [2025-09-23 16:30:58.703] INIT: Entering runlevel: 5 [2025-09-23 16:30:58.703] mtd24 attached [2025-09-23 16:30:58.703] mtd28 attached [2025-09-23 16:30:58.703] mtd32 attached [2025-09-23 16:30:58.703] RTNETLINK answers: File exists [2025-09-23 16:30:58.703] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:30:58.703] ubi0:textures is mounted. [2025-09-23 16:30:58.703] ubi1:animations is mounted. [2025-09-23 16:30:58.703] ubi2:dml_code is mounted. [2025-09-23 16:30:58.703] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:30:58.703] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:30:58.703] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:30:58.703] data.LB_FadeInType0=100 [2025-09-23 16:30:58.703] data.CHLH_FadeInType0=0 [2025-09-23 16:30:58.703] data.WU_FadeInDelay=0 [2025-09-23 16:30:58.703] max_time_out=0 [2025-09-23 16:30:58.703] No splash screen [2025-09-23 16:30:58.703] stop dss Done [2025-09-23 16:30:58.703] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:30:58.759] /dev/mem opened. [2025-09-23 16:30:58.759] Memory mapped at address 0xffff80f96000. [2025-09-23 16:30:58.759] Read at address 0x00600018 (0xffff80f96018): 0x00000000 [2025-09-23 16:30:58.759] Write at address 0x00600018 (0xffff80f96018): 0x00400040, readback 0x00400040 [2025-09-23 16:30:58.807] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:30:58.823] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:30:58.982] Loaded PowerVR consumer services. [2025-09-23 16:30:58.982] 512+0 records in [2025-09-23 16:30:58.998] 512+0 records out [2025-09-23 16:30:59.047] Starting syslogd/klogd: Waiting data available... [2025-09-23 16:30:59.047] done [2025-09-23 16:30:59.063] DML Start [2025-09-23 16:30:59.223] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:30:59.446] DML res1: 0 [2025-09-23 16:30:59.910] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:30:59.931] Read Success [2025-09-23 16:30:59.931] Verifying certificate... [2025-09-23 16:31:00.186] Verified OK [2025-09-23 16:31:00.202] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:31:02.055] Verified OK [2025-09-23 16:31:02.055] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:31:02.564] Verified OK [2025-09-23 16:31:02.564] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:31:05.122] fs.protected_hardlinks = 1 [2025-09-23 16:31:05.122] fs.protected_symlinks = 1 [2025-09-23 16:31:05.157] kernel.modules_disabled = 1 [2025-09-23 16:31:05.330] [2025-09-23 16:31:05.330] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:31:06.573] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:31:14.336] SBL1:1210.0.1.0 [2025-09-23 16:31:14.384] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:31:15.951] SBL2:1210.0.1.0 [2025-09-23 16:31:15.983] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:31:16.095] j-A [2025-09-23 16:31:23.449] The R5 Autosar Classic is running [2025-09-23 16:31:23.449] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:31:23.470] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:31:24.079] INIT: version 2.96 booting [2025-09-23 16:31:24.190] INIT: Entering runlevel: 5 [2025-09-23 16:31:24.334] mtd24 attached [2025-09-23 16:31:24.350] mtd28 attached [2025-09-23 16:31:24.366] mtd32 attached [2025-09-23 16:31:24.444] ubi0:textures is mounted. [2025-09-23 16:31:24.444] RTNETLINK answers: File exists [2025-09-23 16:31:24.444] ubi1:animations is mounted. [2025-09-23 16:31:24.444] ubi2:dml_code is mounted. [2025-09-23 16:31:24.444] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:31:24.444] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:31:24.444] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:31:24.444] data.LB_FadeInType0=100 [2025-09-23 16:31:24.488] data.CHLH_FadeInType0=0 [2025-09-23 16:31:24.488] data.WU_FadeInDelay=0 [2025-09-23 16:31:24.488] max_time_out=0 [2025-09-23 16:31:24.488] No splash screen [2025-09-23 16:31:24.488] stop dss Done [2025-09-23 16:31:24.488] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:31:24.488] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:31:24.503] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:31:24.543] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:31:24.543] /dev/mem opened. [2025-09-23 16:31:24.543] Memory mapped at address 0xffffa89f6000. [2025-09-23 16:31:24.543] Read at address 0x00600018 (0xffffa89f6018): 0x00000000 [2025-09-23 16:31:24.543] Write at address 0x00600018 (0xffffa89f6018): 0x00400040, readback 0x00400040 [2025-09-23 16:31:24.655] Loaded PowerVR consumer services. [2025-09-23 16:31:24.766] 512+0 records in [2025-09-23 16:31:24.766] 512+0 records out [2025-09-23 16:31:24.782] Waiting data available... [2025-09-23 16:31:24.798] Starting syslogd/klogd: done [2025-09-23 16:31:24.815] DML Start [2025-09-23 16:31:25.023] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:31:25.247] DML res1: 0 [2025-09-23 16:31:25.678] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:31:25.699] Read Success [2025-09-23 16:31:25.699] Verifying certificate... [2025-09-23 16:31:25.971] Verified OK [2025-09-23 16:31:25.987] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:31:27.712] Verified OK [2025-09-23 16:31:27.712] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:31:28.306] Verified OK [2025-09-23 16:31:28.306] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:31:30.801] fs.protected_hardlinks = 1 [2025-09-23 16:31:30.801] fs.protected_symlinks = 1 [2025-09-23 16:31:30.817] kernel.modules_disabled = 1 [2025-09-23 16:31:31.008] [2025-09-23 16:31:31.008] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:31:32.311] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:31:40.141] SBL1:1210.0.1.0 [2025-09-23 16:31:40.173] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:31:41.756] SBL2:1210.0.1.0 [2025-09-23 16:31:41.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:31:41.899] j-A [2025-09-23 16:31:49.270] The R5 Autosar Classic is running [2025-09-23 16:31:49.270] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:31:49.270] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:31:49.877] INIT: version 2.96 booting [2025-09-23 16:31:49.990] INIT: Entering runlevel: 5 [2025-09-23 16:31:50.332] mtd32 attached [2025-09-23 16:31:50.332] mtd24 attached [2025-09-23 16:31:50.332] mtd28 attached [2025-09-23 16:31:50.332] RTNETLINK answers: File exists [2025-09-23 16:31:50.332] ubi1:textures is mounted. [2025-09-23 16:31:50.332] ubi0:dml_code is mounted. [2025-09-23 16:31:50.332] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:31:50.332] ubi2:animations is mounted. [2025-09-23 16:31:50.332] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:31:50.332] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:31:50.332] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:31:50.332] data.LB_FadeInType0=100 [2025-09-23 16:31:50.332] data.CHLH_FadeInType0=0 [2025-09-23 16:31:50.332] data.WU_FadeInDelay=0 [2025-09-23 16:31:50.332] max_time_out=0 [2025-09-23 16:31:50.332] No splash screen [2025-09-23 16:31:50.332] stop dss Done [2025-09-23 16:31:50.332] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:31:50.332] /dev/mem opened. [2025-09-23 16:31:50.332] Memory mapped at address 0xffff88b8e000. [2025-09-23 16:31:50.361] Read at address 0x00600018 (0xffff88b8e018): 0x00000000 [2025-09-23 16:31:50.361] Write at address 0x00600018 (0xffff88b8e018): 0x00400040, readback 0x00400040 [2025-09-23 16:31:50.361] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:31:50.361] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:31:50.473] Loaded PowerVR consumer services. [2025-09-23 16:31:50.569] 512+0 records in [2025-09-23 16:31:50.569] 512+0 records out [2025-09-23 16:31:50.601] Waiting data available... [2025-09-23 16:31:50.617] Starting syslogd/klogd: done [2025-09-23 16:31:50.633] DML Start [2025-09-23 16:31:50.809] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:31:51.033] DML res1: 0 [2025-09-23 16:31:51.478] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:31:51.478] Read Success [2025-09-23 16:31:51.478] Verifying certificate... [2025-09-23 16:31:51.733] Verified OK [2025-09-23 16:31:51.749] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:31:53.327] Verified OK [2025-09-23 16:31:53.327] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:31:53.920] Verified OK [2025-09-23 16:31:53.920] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:31:56.766] fs.protected_hardlinks = 1 [2025-09-23 16:31:56.766] fs.protected_symlinks = 1 [2025-09-23 16:31:56.782] kernel.modules_disabled = 1 [2025-09-23 16:31:56.973] [2025-09-23 16:31:56.973] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:31:58.125] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:32:05.891] SBL1:1210.0.1.0 [2025-09-23 16:32:05.939] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:32:07.505] SBL2:1210.0.1.0 [2025-09-23 16:32:07.539] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:32:07.650] j-A [2025-09-23 16:32:15.022] The R5 Autosar Classic is running [2025-09-23 16:32:15.022] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:32:15.022] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:32:15.630] INIT: version 2.96 booting [2025-09-23 16:32:15.741] INIT: Entering runlevel: 5 [2025-09-23 16:32:16.054] mtd24 attached [2025-09-23 16:32:16.054] mtd28 attached [2025-09-23 16:32:16.054] mtd32 attached [2025-09-23 16:32:16.054] ubi0:textures is mounted. [2025-09-23 16:32:16.054] ubi2:dml_code is mounted. [2025-09-23 16:32:16.054] ubi1:animations is mounted. [2025-09-23 16:32:16.054] RTNETLINK answers: File exists [2025-09-23 16:32:16.054] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:32:16.054] data.LB_FadeInType0=100 [2025-09-23 16:32:16.054] data.CHLH_FadeInType0=0 [2025-09-23 16:32:16.055] data.WU_FadeInDelay=0 [2025-09-23 16:32:16.055] max_time_out=0 [2025-09-23 16:32:16.055] No splash screen [2025-09-23 16:32:16.055] stop dss Done [2025-09-23 16:32:16.055] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:32:16.055] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:32:16.055] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:32:16.057] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:32:16.098] /dev/mem opened. [2025-09-23 16:32:16.098] Memory mapped at address 0xffff93544000. [2025-09-23 16:32:16.098] Read at address 0x00600018 (0xffff93544018): 0x00000000 [2025-09-23 16:32:16.098] Write at address 0x00600018 (0xffff93544018): 0x00400040, readback 0x00400040 [2025-09-23 16:32:16.162] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:32:16.178] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:32:16.290] Loaded PowerVR consumer services. [2025-09-23 16:32:16.321] 512+0 records in [2025-09-23 16:32:16.321] 512+0 records out [2025-09-23 16:32:16.354] Starting syslogd/klogd: done [2025-09-23 16:32:16.418] Waiting data available... [2025-09-23 16:32:16.434] DML Start [2025-09-23 16:32:16.593] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:32:16.818] DML res1: 0 [2025-09-23 16:32:17.233] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:32:17.616] Read Success [2025-09-23 16:32:17.616] Verifying certificate... [2025-09-23 16:32:17.617] Verified OK [2025-09-23 16:32:17.617] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:32:19.150] Verified OK [2025-09-23 16:32:19.150] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:32:19.798] Verified OK [2025-09-23 16:32:19.798] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:32:22.471] fs.protected_hardlinks = 1 [2025-09-23 16:32:22.472] fs.protected_symlinks = 1 [2025-09-23 16:32:22.472] kernel.modules_disabled = 1 [2025-09-23 16:32:22.661] [2025-09-23 16:32:22.661] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:32:23.876] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:32:31.660] SBL1:1210.0.1.0 [2025-09-23 16:32:31.692] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:32:33.276] SBL2:1210.0.1.0 [2025-09-23 16:32:33.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:32:33.419] j-A [2025-09-23 16:32:40.757] The R5 Autosar Classic is running [2025-09-23 16:32:40.788] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:32:40.788] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:32:41.396] INIT: version 2.96 booting [2025-09-23 16:32:41.507] INIT: Entering runlevel: 5 [2025-09-23 16:32:41.791] mtd28 attached [2025-09-23 16:32:41.791] mtd24 attached [2025-09-23 16:32:41.791] mtd32 attached [2025-09-23 16:32:41.791] ubi0:animations is mounted. [2025-09-23 16:32:41.791] RTNETLINK answers: File exists [2025-09-23 16:32:41.791] ubi1:textures is mounted. [2025-09-23 16:32:41.791] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:32:41.791] ubi2:dml_code is mounted. [2025-09-23 16:32:41.791] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:32:41.791] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:32:41.800] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:32:41.800] data.LB_FadeInType0=100 [2025-09-23 16:32:41.800] data.CHLH_FadeInType0=0 [2025-09-23 16:32:41.800] data.WU_FadeInDelay=0 [2025-09-23 16:32:41.800] max_time_out=0 [2025-09-23 16:32:41.800] No splash screen [2025-09-23 16:32:41.800] stop dss Done [2025-09-23 16:32:41.800] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:32:41.873] /dev/mem opened. [2025-09-23 16:32:41.873] Memory mapped at address 0xffff83053000. [2025-09-23 16:32:41.873] Read at address 0x00600018 (0xffff83053018): 0x00000000 [2025-09-23 16:32:41.873] Write at address 0x00600018 (0xffff83053018): 0x00400040, readback 0x00400040 [2025-09-23 16:32:41.873] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:32:41.873] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:32:41.937] Loaded PowerVR consumer services. [2025-09-23 16:32:42.081] 512+0 records in [2025-09-23 16:32:42.081] 512+0 records out [2025-09-23 16:32:42.097] Waiting data available... [2025-09-23 16:32:42.113] Starting syslogd/klogd: done [2025-09-23 16:32:42.129] DML Start [2025-09-23 16:32:42.353] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:32:42.806] DML res1: 0 [2025-09-23 16:32:42.957] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:32:42.957] Read Success [2025-09-23 16:32:42.957] Verifying certificate... [2025-09-23 16:32:43.261] Verified OK [2025-09-23 16:32:43.276] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:32:45.061] Verified OK [2025-09-23 16:32:45.061] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:32:45.626] Verified OK [2025-09-23 16:32:45.626] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:32:48.056] fs.protected_hardlinks = 1 [2025-09-23 16:32:48.085] fs.protected_symlinks = 1 [2025-09-23 16:32:48.085] kernel.modules_disabled = 1 [2025-09-23 16:32:48.261] [2025-09-23 16:32:48.261] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:32:49.654] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:32:57.418] SBL1:1210.0.1.0 [2025-09-23 16:32:57.450] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:32:59.032] SBL2:1210.0.1.0 [2025-09-23 16:32:59.074] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:32:59.160] j-A [2025-09-23 16:33:06.513] The R5 Autosar Classic is running [2025-09-23 16:33:06.538] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:33:06.538] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:33:07.146] INIT: version 2.96 booting [2025-09-23 16:33:07.257] INIT: Entering runlevel: 5 [2025-09-23 16:33:07.541] mtd24 attached [2025-09-23 16:33:07.541] mtd28 attached [2025-09-23 16:33:07.541] mtd32 attached [2025-09-23 16:33:07.541] ubi0:textures is mounted. [2025-09-23 16:33:07.541] RTNETLINK answers: File exists [2025-09-23 16:33:07.541] ubi1:animations is mounted. [2025-09-23 16:33:07.545] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:33:07.545] ubi2:dml_code is mounted. [2025-09-23 16:33:07.545] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:33:07.545] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:33:07.545] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:33:07.545] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:33:07.545] data.LB_FadeInType0=100 [2025-09-23 16:33:07.545] data.CHLH_FadeInType0=0 [2025-09-23 16:33:07.545] data.WU_FadeInDelay=0 [2025-09-23 16:33:07.545] max_time_out=0 [2025-09-23 16:33:07.545] No splash screen [2025-09-23 16:33:07.545] stop dss Done [2025-09-23 16:33:07.641] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:33:07.641] /dev/mem opened. [2025-09-23 16:33:07.641] Memory mapped at address 0xffff816ac000. [2025-09-23 16:33:07.641] Read at address 0x00600018 (0xffff816ac018): 0x00000000 [2025-09-23 16:33:07.641] Write at address 0x00600018 (0xffff816ac018): 0x00400040, readback 0x00400040 [2025-09-23 16:33:07.641] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:33:07.784] Loaded PowerVR consumer services. [2025-09-23 16:33:07.800] 512+0 records in [2025-09-23 16:33:07.800] 512+0 records out [2025-09-23 16:33:07.864] Starting syslogd/klogd: done [2025-09-23 16:33:07.913] Waiting data available... [2025-09-23 16:33:07.913] DML Start [2025-09-23 16:33:08.105] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:33:08.558] DML res1: 0 [2025-09-23 16:33:08.912] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:33:08.912] Read Success [2025-09-23 16:33:08.912] Verifying certificate... [2025-09-23 16:33:09.168] Verified OK [2025-09-23 16:33:09.200] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:33:10.799] Verified OK [2025-09-23 16:33:10.825] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:33:11.401] Verified OK [2025-09-23 16:33:11.401] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:33:13.960] fs.protected_hardlinks = 1 [2025-09-23 16:33:13.960] fs.protected_symlinks = 1 [2025-09-23 16:33:13.976] kernel.modules_disabled = 1 [2025-09-23 16:33:14.168] [2025-09-23 16:33:14.168] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:33:15.404] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:33:23.154] SBL1:1210.0.1.0 [2025-09-23 16:33:23.202] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:33:24.785] SBL2:1210.0.1.0 [2025-09-23 16:33:24.826] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:33:24.913] j-A [2025-09-23 16:33:32.265] The R5 Autosar Classic is running [2025-09-23 16:33:32.290] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:33:32.290] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:33:32.898] INIT: version 2.96 booting [2025-09-23 16:33:33.010] INIT: Entering runlevel: 5 [2025-09-23 16:33:33.310] mtd24 attached [2025-09-23 16:33:33.310] mtd28 attached [2025-09-23 16:33:33.310] mtd32 attached [2025-09-23 16:33:33.310] ubi0:textures is mounted. [2025-09-23 16:33:33.310] RTNETLINK answers: File exists [2025-09-23 16:33:33.310] ubi1:animations is mounted. [2025-09-23 16:33:33.310] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:33:33.310] ubi2:dml_code is mounted. [2025-09-23 16:33:33.310] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:33:33.310] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:33:33.310] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:33:33.310] data.LB_FadeInType0=100 [2025-09-23 16:33:33.310] data.CHLH_FadeInType0=0 [2025-09-23 16:33:33.310] data.WU_FadeInDelay=0 [2025-09-23 16:33:33.310] max_time_out=0 [2025-09-23 16:33:33.310] No splash screen [2025-09-23 16:33:33.310] stop dss Done [2025-09-23 16:33:33.310] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:33:33.329] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:33:33.364] /dev/mem opened. [2025-09-23 16:33:33.364] Memory mapped at address 0xffff9ec4c000. [2025-09-23 16:33:33.364] Read at address 0x00600018 (0xffff9ec4c018): 0x00000000 [2025-09-23 16:33:33.364] Write at address 0x00600018 (0xffff9ec4c018): 0x00400040, readback 0x00400040 [2025-09-23 16:33:33.364] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:33:33.443] Loaded PowerVR consumer services. [2025-09-23 16:33:33.587] 512+0 records in [2025-09-23 16:33:33.587] 512+0 records out [2025-09-23 16:33:33.603] Waiting data available... [2025-09-23 16:33:33.636] Starting syslogd/klogd: done [2025-09-23 16:33:33.652] DML Start [2025-09-23 16:33:33.875] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:33:34.310] DML res1: 0 [2025-09-23 16:33:34.475] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:33:34.475] Read Success [2025-09-23 16:33:34.475] Verifying certificate... [2025-09-23 16:33:34.731] Verified OK [2025-09-23 16:33:34.731] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:33:36.346] Verified OK [2025-09-23 16:33:36.380] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:33:36.969] Verified OK [2025-09-23 16:33:36.969] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:33:39.719] fs.protected_hardlinks = 1 [2025-09-23 16:33:39.736] fs.protected_symlinks = 1 [2025-09-23 16:33:39.736] kernel.modules_disabled = 1 [2025-09-23 16:33:39.927] [2025-09-23 16:33:39.927] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:33:41.171] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:33:48.947] SBL1:1210.0.1.0 [2025-09-23 16:33:48.979] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:33:50.562] SBL2:1210.0.1.0 [2025-09-23 16:33:50.609] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:33:50.705] j-A [2025-09-23 16:33:58.043] The R5 Autosar Classic is running [2025-09-23 16:33:58.074] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:33:58.074] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:33:58.682] INIT: version 2.96 booting [2025-09-23 16:33:58.794] INIT: Entering runlevel: 5 [2025-09-23 16:33:59.076] mtd24 attached [2025-09-23 16:33:59.076] mtd28 attached [2025-09-23 16:33:59.076] mtd32 attached [2025-09-23 16:33:59.076] ubi0:textures is mounted. [2025-09-23 16:33:59.076] RTNETLINK answers: File exists [2025-09-23 16:33:59.076] ubi1:animations is mounted. [2025-09-23 16:33:59.082] ubi2:dml_code is mounted. [2025-09-23 16:33:59.082] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:33:59.082] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:33:59.082] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:33:59.082] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:33:59.082] data.LB_FadeInType0=100 [2025-09-23 16:33:59.082] data.CHLH_FadeInType0=0 [2025-09-23 16:33:59.082] data.WU_FadeInDelay=0 [2025-09-23 16:33:59.082] max_time_out=0 [2025-09-23 16:33:59.082] No splash screen [2025-09-23 16:33:59.083] stop dss Done [2025-09-23 16:33:59.083] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:33:59.151] /dev/mem opened. [2025-09-23 16:33:59.151] Memory mapped at address 0xffff92bbf000. [2025-09-23 16:33:59.151] Read at address 0x00600018 (0xffff92bbf018): 0x00000000 [2025-09-23 16:33:59.151] Write at address 0x00600018 (0xffff92bbf018): 0x00400040, readback 0x00400040 [2025-09-23 16:33:59.198] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:33:59.198] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:33:59.358] Loaded PowerVR consumer services. [2025-09-23 16:33:59.374] 512+0 records in [2025-09-23 16:33:59.374] 512+0 records out [2025-09-23 16:33:59.422] Starting syslogd/klogd: done [2025-09-23 16:33:59.454] Waiting data available... [2025-09-23 16:33:59.454] DML Start [2025-09-23 16:33:59.646] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:33:59.886] DML res1: 0 [2025-09-23 16:34:00.276] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:34:00.276] Read Success [2025-09-23 16:34:00.276] Verifying certificate... [2025-09-23 16:34:00.624] Verified OK [2025-09-23 16:34:00.624] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:34:02.131] Verified OK [2025-09-23 16:34:02.131] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:34:02.793] Verified OK [2025-09-23 16:34:02.793] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:34:05.524] fs.protected_hardlinks = 1 [2025-09-23 16:34:05.524] fs.protected_symlinks = 1 [2025-09-23 16:34:05.524] kernel.modules_disabled = 1 [2025-09-23 16:34:05.698] [2025-09-23 16:34:05.698] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:34:06.950] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:34:14.718] SBL1:1210.0.1.0 [2025-09-23 16:34:14.750] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:34:16.333] SBL2:1210.0.1.0 [2025-09-23 16:34:16.365] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:34:16.461] j-A [2025-09-23 16:34:23.815] The R5 Autosar Classic is running [2025-09-23 16:34:23.840] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:34:23.840] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:34:24.448] INIT: version 2.96 booting [2025-09-23 16:34:24.559] INIT: Entering runlevel: 5 [2025-09-23 16:34:24.860] mtd28 attached [2025-09-23 16:34:24.860] mtd32 attached [2025-09-23 16:34:24.860] mtd24 attached [2025-09-23 16:34:24.860] ubi0:animations is mounted. [2025-09-23 16:34:24.860] RTNETLINK answers: File exists [2025-09-23 16:34:24.860] ubi1:dml_code is mounted. [2025-09-23 16:34:24.860] ubi2:textures is mounted. [2025-09-23 16:34:24.860] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:34:24.860] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:34:24.860] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:34:24.860] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:34:24.860] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:34:24.860] data.LB_FadeInType0=100 [2025-09-23 16:34:24.860] data.CHLH_FadeInType0=0 [2025-09-23 16:34:24.860] data.WU_FadeInDelay=0 [2025-09-23 16:34:24.860] max_time_out=0 [2025-09-23 16:34:24.860] No splash screen [2025-09-23 16:34:24.860] stop dss Done [2025-09-23 16:34:24.885] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:34:24.885] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:34:24.921] /dev/mem opened. [2025-09-23 16:34:24.921] Memory mapped at address 0xffff95351000. [2025-09-23 16:34:24.921] Read at address 0x00600018 (0xffff95351018): 0x00000000 [2025-09-23 16:34:24.921] Write at address 0x00600018 (0xffff95351018): 0x00400040, readback 0x00400040 [2025-09-23 16:34:25.097] Loaded PowerVR consumer services. [2025-09-23 16:34:25.113] 512+0 records in [2025-09-23 16:34:25.129] 512+0 records out [2025-09-23 16:34:25.145] Waiting data available... [2025-09-23 16:34:25.161] Starting syslogd/klogd: done [2025-09-23 16:34:25.176] DML Start [2025-09-23 16:34:25.369] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:34:25.609] DML res1: 0 [2025-09-23 16:34:26.056] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:34:26.072] Read Success [2025-09-23 16:34:26.072] Verifying certificate... [2025-09-23 16:34:26.312] Verified OK [2025-09-23 16:34:26.328] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:34:27.942] Verified OK [2025-09-23 16:34:27.982] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:34:28.635] Verified OK [2025-09-23 16:34:28.635] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:34:31.240] fs.protected_hardlinks = 1 [2025-09-23 16:34:31.267] fs.protected_symlinks = 1 [2025-09-23 16:34:31.267] kernel.modules_disabled = 1 [2025-09-23 16:34:31.465] [2025-09-23 16:34:31.465] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:34:32.675] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:34:40.480] SBL1:1210.0.1.0 [2025-09-23 16:34:40.527] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:34:42.095] SBL2:1210.0.1.0 [2025-09-23 16:34:42.144] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:34:42.238] j-A [2025-09-23 16:34:49.610] The R5 Autosar Classic is running [2025-09-23 16:34:49.610] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:34:49.610] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:34:50.217] INIT: version 2.96 booting [2025-09-23 16:34:50.329] INIT: Entering runlevel: 5 [2025-09-23 16:34:50.659] mtd24 attached [2025-09-23 16:34:50.659] mtd28 attached [2025-09-23 16:34:50.659] mtd32 attached [2025-09-23 16:34:50.659] ubi0:textures is mounted. [2025-09-23 16:34:50.659] RTNETLINK answers: File exists [2025-09-23 16:34:50.659] ubi1:animations is mounted. [2025-09-23 16:34:50.659] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:34:50.659] ubi2:dml_code is mounted. [2025-09-23 16:34:50.659] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:34:50.659] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:34:50.659] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:34:50.659] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:34:50.659] data.LB_FadeInType0=100 [2025-09-23 16:34:50.659] data.CHLH_FadeInType0=0 [2025-09-23 16:34:50.659] data.WU_FadeInDelay=0 [2025-09-23 16:34:50.659] max_time_out=0 [2025-09-23 16:34:50.659] No splash screen [2025-09-23 16:34:50.659] stop dss Done [2025-09-23 16:34:50.700] /dev/mem opened. [2025-09-23 16:34:50.700] Memory mapped at address 0xffffb6072000. [2025-09-23 16:34:50.700] Read at address 0x00600018 (0xffffb6072018): 0x00000000 [2025-09-23 16:34:50.700] Write at address 0x00600018 (0xffffb6072018): 0x00400040, readback 0x00400040 [2025-09-23 16:34:50.700] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:34:50.700] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:34:50.795] Loaded PowerVR consumer services. [2025-09-23 16:34:50.908] 512+0 records in [2025-09-23 16:34:50.908] 512+0 records out [2025-09-23 16:34:50.940] Starting syslogd/klogd: done [2025-09-23 16:34:50.956] Waiting data available... [2025-09-23 16:34:50.956] DML Start [2025-09-23 16:34:51.116] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:34:51.323] DML res1: 0 [2025-09-23 16:34:51.756] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:34:51.771] Read Success [2025-09-23 16:34:51.771] Verifying certificate... [2025-09-23 16:34:52.027] Verified OK [2025-09-23 16:34:52.027] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:34:53.599] Verified OK [2025-09-23 16:34:53.599] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:34:54.222] Verified OK [2025-09-23 16:34:54.222] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:34:57.052] fs.protected_hardlinks = 1 [2025-09-23 16:34:57.068] fs.protected_symlinks = 1 [2025-09-23 16:34:57.068] kernel.modules_disabled = 1 [2025-09-23 16:34:57.259] [2025-09-23 16:34:57.259] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:34:58.474] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:35:06.558] SBL1:1210.0.1.0 [2025-09-23 16:35:06.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:35:08.172] SBL2:1210.0.1.0 [2025-09-23 16:35:08.207] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:35:08.316] j-A [2025-09-23 16:35:15.654] The R5 Autosar Classic is running [2025-09-23 16:35:15.685] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:35:15.685] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:35:16.293] INIT: version 2.96 booting [2025-09-23 16:35:16.389] INIT: Entering runlevel: 5 [2025-09-23 16:35:16.675] mtd28 attached [2025-09-23 16:35:16.675] mtd24 attached [2025-09-23 16:35:16.675] ubi0:animations is mounted. [2025-09-23 16:35:16.675] mtd32 attached [2025-09-23 16:35:16.675] ubi1:textures is mounted. [2025-09-23 16:35:16.675] RTNETLINK answers: File exists [2025-09-23 16:35:16.691] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:35:16.691] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:35:16.691] ubi2:dml_code is mounted. [2025-09-23 16:35:16.691] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:35:16.691] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:35:16.691] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:35:16.691] data.LB_FadeInType0=100 [2025-09-23 16:35:16.691] data.CHLH_FadeInType0=0 [2025-09-23 16:35:16.691] data.WU_FadeInDelay=0 [2025-09-23 16:35:16.691] max_time_out=0 [2025-09-23 16:35:16.691] No splash screen [2025-09-23 16:35:16.691] stop dss Done [2025-09-23 16:35:16.721] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:35:16.721] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:35:16.737] /dev/mem opened. [2025-09-23 16:35:16.769] Memory mapped at address 0xffffafc40000. [2025-09-23 16:35:16.769] Read at address 0x00600018 (0xffffafc40018): 0x00000000 [2025-09-23 16:35:16.769] Write at address 0x00600018 (0xffffafc40018): 0x00400040, readback 0x00400040 [2025-09-23 16:35:16.929] Loaded PowerVR consumer services. [2025-09-23 16:35:16.993] 512+0 records in [2025-09-23 16:35:16.993] 512+0 records out [2025-09-23 16:35:17.009] Waiting data available... [2025-09-23 16:35:17.025] Starting syslogd/klogd: done [2025-09-23 16:35:17.041] DML Start [2025-09-23 16:35:17.217] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:35:17.441] DML res1: 0 [2025-09-23 16:35:17.878] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:35:17.878] Read Success [2025-09-23 16:35:17.878] Verifying certificate... [2025-09-23 16:35:18.222] Verified OK [2025-09-23 16:35:18.222] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:35:19.764] Verified OK [2025-09-23 16:35:19.764] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:35:20.432] Verified OK [2025-09-23 16:35:20.432] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:35:23.015] fs.protected_hardlinks = 1 [2025-09-23 16:35:23.015] fs.protected_symlinks = 1 [2025-09-23 16:35:23.022] kernel.modules_disabled = 1 [2025-09-23 16:35:23.229] [2025-09-23 16:35:23.229] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:35:24.525] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:35:32.311] SBL1:1210.0.1.0 [2025-09-23 16:35:32.359] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:35:33.926] SBL2:1210.0.1.0 [2025-09-23 16:35:33.958] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:35:34.070] j-A [2025-09-23 16:35:41.442] The R5 Autosar Classic is running [2025-09-23 16:35:41.442] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:35:41.442] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:35:42.049] INIT: version 2.96 booting [2025-09-23 16:35:42.146] INIT: Entering runlevel: 5 [2025-09-23 16:35:42.521] mtd24 attached [2025-09-23 16:35:42.521] mtd32 attached [2025-09-23 16:35:42.521] mtd28 attached [2025-09-23 16:35:42.521] ubi0:textures is mounted. [2025-09-23 16:35:42.521] ubi1:dml_code is mounted. [2025-09-23 16:35:42.521] RTNETLINK answers: File exists [2025-09-23 16:35:42.521] ubi2:animations is mounted. [2025-09-23 16:35:42.521] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:35:42.521] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:35:42.521] data.LB_FadeInType0=100 [2025-09-23 16:35:42.521] data.CHLH_FadeInType0=0 [2025-09-23 16:35:42.521] data.WU_FadeInDelay=0 [2025-09-23 16:35:42.521] max_time_out=0 [2025-09-23 16:35:42.521] No splash screen [2025-09-23 16:35:42.521] stop dss Done [2025-09-23 16:35:42.521] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:35:42.521] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:35:42.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:35:42.521] /dev/mem opened. [2025-09-23 16:35:42.521] Memory mapped at address 0xffff87ca9000. [2025-09-23 16:35:42.521] Read at address 0x00600018 (0xffff87ca9018): 0x00000000 [2025-09-23 16:35:42.521] Write at address 0x00600018 (0xffff87ca9018): 0x00400040, readback 0x00400040 [2025-09-23 16:35:42.521] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:35:42.526] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:35:42.686] Loaded PowerVR consumer services. [2025-09-23 16:35:42.718] 512+0 records in [2025-09-23 16:35:42.718] 512+0 records out [2025-09-23 16:35:42.750] Starting syslogd/klogd: done [2025-09-23 16:35:42.782] Waiting data available... [2025-09-23 16:35:42.782] DML Start [2025-09-23 16:35:43.054] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:35:43.520] DML res1: 0 [2025-09-23 16:35:43.710] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:35:43.710] Read Success [2025-09-23 16:35:43.726] Verifying certificate... [2025-09-23 16:35:43.966] Verified OK [2025-09-23 16:35:43.997] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:35:45.566] Verified OK [2025-09-23 16:35:45.566] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:35:46.123] Verified OK [2025-09-23 16:35:46.139] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:35:48.857] fs.protected_hardlinks = 1 [2025-09-23 16:35:48.918] fs.protected_symlinks = 1 [2025-09-23 16:35:48.918] kernel.modules_disabled = 1 [2025-09-23 16:35:49.080] [2025-09-23 16:35:49.080] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:35:50.265] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:35:58.045] SBL1:1210.0.1.0 [2025-09-23 16:35:58.077] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:35:59.661] SBL2:1210.0.1.0 [2025-09-23 16:35:59.693] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:35:59.804] j-A [2025-09-23 16:36:07.144] The R5 Autosar Classic is running [2025-09-23 16:36:07.175] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:36:07.175] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:36:07.782] INIT: version 2.96 booting [2025-09-23 16:36:07.894] INIT: Entering runlevel: 5 [2025-09-23 16:36:08.211] mtd24 attached [2025-09-23 16:36:08.211] mtd28 attached [2025-09-23 16:36:08.211] mtd32 attached [2025-09-23 16:36:08.211] ubi0:textures is mounted. [2025-09-23 16:36:08.211] RTNETLINK answers: File exists [2025-09-23 16:36:08.211] ubi1:animations is mounted. [2025-09-23 16:36:08.211] ubi2:dml_code is mounted. [2025-09-23 16:36:08.211] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:36:08.211] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:36:08.211] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:36:08.211] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:36:08.211] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:36:08.211] data.LB_FadeInType0=100 [2025-09-23 16:36:08.211] data.CHLH_FadeInType0=0 [2025-09-23 16:36:08.211] data.WU_FadeInDelay=0 [2025-09-23 16:36:08.211] max_time_out=0 [2025-09-23 16:36:08.211] No splash screen [2025-09-23 16:36:08.211] stop dss Done [2025-09-23 16:36:08.218] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:36:08.254] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:36:08.254] /dev/mem opened. [2025-09-23 16:36:08.254] Memory mapped at address 0xffffb2771000. [2025-09-23 16:36:08.254] Read at address 0x00600018 (0xffffb2771018): 0x00000000 [2025-09-23 16:36:08.254] Write at address 0x00600018 (0xffffb2771018): 0x00400040, readback 0x00400040 [2025-09-23 16:36:08.365] Loaded PowerVR consumer services. [2025-09-23 16:36:08.478] Waiting data available... [2025-09-23 16:36:08.478] 512+0 records in [2025-09-23 16:36:08.478] 512+0 records out [2025-09-23 16:36:08.510] Starting syslogd/klogd: done [2025-09-23 16:36:08.525] DML Start [2025-09-23 16:36:08.718] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:36:08.957] DML res1: 0 [2025-09-23 16:36:09.405] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:36:09.428] Read Success [2025-09-23 16:36:09.428] Verifying certificate... [2025-09-23 16:36:09.699] Verified OK [2025-09-23 16:36:09.715] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:36:11.405] Verified OK [2025-09-23 16:36:11.405] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:36:12.028] Verified OK [2025-09-23 16:36:12.028] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:36:14.553] fs.protected_hardlinks = 1 [2025-09-23 16:36:14.569] fs.protected_symlinks = 1 [2025-09-23 16:36:14.569] kernel.modules_disabled = 1 [2025-09-23 16:36:14.777] [2025-09-23 16:36:14.777] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:36:16.035] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:36:23.818] SBL1:1210.0.1.0 [2025-09-23 16:36:23.866] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:36:25.433] SBL2:1210.0.1.0 [2025-09-23 16:36:25.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:36:25.576] j-A [2025-09-23 16:36:32.951] The R5 Autosar Classic is running [2025-09-23 16:36:32.951] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:36:32.951] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:36:33.558] INIT: version 2.96 booting [2025-09-23 16:36:33.669] INIT: Entering runlevel: 5 [2025-09-23 16:36:33.994] mtd24 attached [2025-09-23 16:36:33.994] mtd28 attached [2025-09-23 16:36:33.994] mtd32 attached [2025-09-23 16:36:33.994] ubi0:textures is mounted. [2025-09-23 16:36:33.994] ubi1:animations is mounted. [2025-09-23 16:36:33.994] RTNETLINK answers: File exists [2025-09-23 16:36:33.994] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:36:33.994] ubi2:dml_code is mounted. [2025-09-23 16:36:33.994] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:36:33.994] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:36:33.994] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:36:33.994] data.LB_FadeInType0=100 [2025-09-23 16:36:33.994] data.CHLH_FadeInType0=0 [2025-09-23 16:36:33.994] data.WU_FadeInDelay=0 [2025-09-23 16:36:33.994] max_time_out=0 [2025-09-23 16:36:33.994] No splash screen [2025-09-23 16:36:33.994] stop dss Done [2025-09-23 16:36:33.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:36:33.994] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:36:34.018] /dev/mem opened. [2025-09-23 16:36:34.018] Memory mapped at address 0xffff96ce1000. [2025-09-23 16:36:34.018] Read at address 0x00600018 (0xffff96ce1018): 0x00000000 [2025-09-23 16:36:34.018] Write at address 0x00600018 (0xffff96ce1018): 0x00400040, readback 0x00400040 [2025-09-23 16:36:34.018] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:36:34.145] Loaded PowerVR consumer services. [2025-09-23 16:36:34.241] Waiting data available... [2025-09-23 16:36:34.241] 512+0 records in [2025-09-23 16:36:34.258] 512+0 records out [2025-09-23 16:36:34.274] Starting syslogd/klogd: done [2025-09-23 16:36:34.290] DML Start [2025-09-23 16:36:34.481] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:36:34.705] DML res1: 0 [2025-09-23 16:36:35.174] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:36:35.174] Read Success [2025-09-23 16:36:35.174] Verifying certificate... [2025-09-23 16:36:35.414] Verified OK [2025-09-23 16:36:35.430] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:36:37.013] Verified OK [2025-09-23 16:36:37.047] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:36:37.669] Verified OK [2025-09-23 16:36:37.685] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:36:40.417] fs.protected_hardlinks = 1 [2025-09-23 16:36:40.417] fs.protected_symlinks = 1 [2025-09-23 16:36:40.417] kernel.modules_disabled = 1 [2025-09-23 16:36:40.609] [2025-09-23 16:36:40.609] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:36:41.820] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:36:49.553] SBL1:1210.0.1.0 [2025-09-23 16:36:49.601] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:36:51.168] SBL2:1210.0.1.0 [2025-09-23 16:36:51.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:36:51.312] j-A [2025-09-23 16:36:58.688] The R5 Autosar Classic is running [2025-09-23 16:36:58.689] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:36:58.689] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:36:59.297] INIT: version 2.96 booting [2025-09-23 16:36:59.409] INIT: Entering runlevel: 5 [2025-09-23 16:36:59.568] mtd24 attached [2025-09-23 16:36:59.699] mtd32 attached [2025-09-23 16:36:59.700] mtd28 attached [2025-09-23 16:36:59.700] ubi0:textures is mounted. [2025-09-23 16:36:59.700] ubi1:dml_code is mounted. [2025-09-23 16:36:59.702] RTNETLINK answers: File exists [2025-09-23 16:36:59.702] ubi2:animations is mounted. [2025-09-23 16:36:59.702] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:36:59.702] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:36:59.702] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:36:59.702] data.LB_FadeInType0=100 [2025-09-23 16:36:59.702] data.CHLH_FadeInType0=0 [2025-09-23 16:36:59.702] data.WU_FadeInDelay=0 [2025-09-23 16:36:59.702] max_time_out=0 [2025-09-23 16:36:59.702] No splash screen [2025-09-23 16:36:59.702] stop dss Done [2025-09-23 16:36:59.702] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:36:59.702] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:36:59.734] /dev/mem opened. [2025-09-23 16:36:59.734] Memory mapped at address 0xffffa03be000. [2025-09-23 16:36:59.760] Read at address 0x00600018 (0xffffa03be018): 0x00000000 [2025-09-23 16:36:59.760] Write at address 0x00600018 (0xffffa03be018): 0x00400040, readback 0x00400040 [2025-09-23 16:36:59.792] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:36:59.808] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:36:59.967] Loaded PowerVR consumer services. [2025-09-23 16:37:00.014] 512+0 records in [2025-09-23 16:37:00.014] 512+0 records out [2025-09-23 16:37:00.014] Waiting data available... [2025-09-23 16:37:00.014] Starting syslogd/klogd: done [2025-09-23 16:37:00.046] DML Start [2025-09-23 16:37:00.190] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:37:00.446] DML res1: 0 [2025-09-23 16:37:00.846] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:37:00.868] Read Success [2025-09-23 16:37:00.868] Verifying certificate... [2025-09-23 16:37:01.107] Verified OK [2025-09-23 16:37:01.123] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:37:02.862] Verified OK [2025-09-23 16:37:02.862] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:37:03.453] Verified OK [2025-09-23 16:37:03.453] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:37:06.075] fs.protected_hardlinks = 1 [2025-09-23 16:37:06.075] fs.protected_symlinks = 1 [2025-09-23 16:37:06.091] kernel.modules_disabled = 1 [2025-09-23 16:37:06.283] [2025-09-23 16:37:06.283] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:37:07.551] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:37:15.278] SBL1:1210.0.1.0 [2025-09-23 16:37:15.310] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:37:16.893] SBL2:1210.0.1.0 [2025-09-23 16:37:17.072] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:37:17.072] j-A [2025-09-23 16:37:24.375] The R5 Autosar Classic is running [2025-09-23 16:37:24.401] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:37:24.401] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:37:25.009] INIT: version 2.96 booting [2025-09-23 16:37:25.121] INIT: Entering runlevel: 5 [2025-09-23 16:37:25.280] mtd24 attached [2025-09-23 16:37:25.280] mtd28 attached [2025-09-23 16:37:25.312] mtd32 attached [2025-09-23 16:37:25.328] ubi0:textures is mounted. [2025-09-23 16:37:25.328] ubi1:animations is mounted. [2025-09-23 16:37:25.391] RTNETLINK answers: File exists [2025-09-23 16:37:25.391] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:37:25.391] ubi2:dml_code is mounted. [2025-09-23 16:37:25.391] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:37:25.391] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:37:25.391] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:37:25.391] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:37:25.412] data.LB_FadeInType0=100 [2025-09-23 16:37:25.412] data.CHLH_FadeInType0=0 [2025-09-23 16:37:25.412] data.WU_FadeInDelay=0 [2025-09-23 16:37:25.412] max_time_out=0 [2025-09-23 16:37:25.412] No splash screen [2025-09-23 16:37:25.412] stop dss Done [2025-09-23 16:37:25.442] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:37:25.442] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:37:25.495] /dev/mem opened. [2025-09-23 16:37:25.495] Memory mapped at address 0xffff836b4000. [2025-09-23 16:37:25.495] Read at address 0x00600018 (0xffff836b4018): 0x00000000 [2025-09-23 16:37:25.495] Write at address 0x00600018 (0xffff836b4018): 0x00400040, readback 0x00400040 [2025-09-23 16:37:25.607] Loaded PowerVR consumer services. [2025-09-23 16:37:25.719] 512+0 records in [2025-09-23 16:37:25.719] 512+0 records out [2025-09-23 16:37:25.735] Waiting data available... [2025-09-23 16:37:25.767] Starting syslogd/klogd: done [2025-09-23 16:37:25.783] DML Start [2025-09-23 16:37:25.975] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:37:26.198] DML res1: 0 [2025-09-23 16:37:26.678] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:37:26.699] Read Success [2025-09-23 16:37:26.699] Verifying certificate... [2025-09-23 16:37:26.971] Verified OK [2025-09-23 16:37:26.987] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:37:28.648] Verified OK [2025-09-23 16:37:28.648] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:37:29.311] Verified OK [2025-09-23 16:37:29.311] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:37:31.918] fs.protected_hardlinks = 1 [2025-09-23 16:37:31.918] fs.protected_symlinks = 1 [2025-09-23 16:37:31.934] kernel.modules_disabled = 1 [2025-09-23 16:37:32.109] [2025-09-23 16:37:32.109] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:37:33.288] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:37:41.434] SBL1:1210.0.1.0 [2025-09-23 16:37:41.435] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:37:42.635] SBL2:1210.0.1.0 [2025-09-23 16:37:42.686] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:37:42.780] j-A [2025-09-23 16:37:50.152] The R5 Autosar Classic is running [2025-09-23 16:37:50.152] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:37:50.152] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:37:50.759] INIT: version 2.96 booting [2025-09-23 16:37:50.855] INIT: Entering runlevel: 5 [2025-09-23 16:37:51.196] mtd24 attached [2025-09-23 16:37:51.196] mtd28 attached [2025-09-23 16:37:51.196] mtd32 attached [2025-09-23 16:37:51.196] ubi0:textures is mounted. [2025-09-23 16:37:51.196] RTNETLINK answers: File exists [2025-09-23 16:37:51.196] ubi1:animations is mounted. [2025-09-23 16:37:51.196] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:37:51.196] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:37:51.196] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:37:51.196] ubi2:dml_code is mounted. [2025-09-23 16:37:51.196] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:37:51.196] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:37:51.196] data.LB_FadeInType0=100 [2025-09-23 16:37:51.196] data.CHLH_FadeInType0=0 [2025-09-23 16:37:51.196] data.WU_FadeInDelay=0 [2025-09-23 16:37:51.196] max_time_out=0 [2025-09-23 16:37:51.196] No splash screen [2025-09-23 16:37:51.196] stop dss Done [2025-09-23 16:37:51.217] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:37:51.217] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:37:51.217] /dev/mem opened. [2025-09-23 16:37:51.217] Memory mapped at address 0xffff8733f000. [2025-09-23 16:37:51.217] Read at address 0x00600018 (0xffff8733f018): 0x00000000 [2025-09-23 16:37:51.217] Write at address 0x00600018 (0xffff8733f018): 0x00400040, readback 0x00400040 [2025-09-23 16:37:51.361] Loaded PowerVR consumer services. [2025-09-23 16:37:51.441] 512+0 records in [2025-09-23 16:37:51.441] 512+0 records out [2025-09-23 16:37:51.473] Waiting data available... [2025-09-23 16:37:51.488] Starting syslogd/klogd: done [2025-09-23 16:37:51.504] DML Start [2025-09-23 16:37:51.697] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:37:51.920] DML res1: 0 [2025-09-23 16:37:52.361] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:37:52.361] Read Success [2025-09-23 16:37:52.361] Verifying certificate... [2025-09-23 16:37:52.616] Verified OK [2025-09-23 16:37:52.632] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:37:54.455] Verified OK [2025-09-23 16:37:54.455] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:37:54.902] Verified OK [2025-09-23 16:37:54.902] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:37:57.269] fs.protected_hardlinks = 1 [2025-09-23 16:37:57.269] fs.protected_symlinks = 1 [2025-09-23 16:37:57.285] kernel.modules_disabled = 1 [2025-09-23 16:37:57.461] [2025-09-23 16:37:57.461] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:37:59.017] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:38:07.166] SBL1:1210.0.1.0 [2025-09-23 16:38:07.198] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:38:08.781] SBL2:1210.0.1.0 [2025-09-23 16:38:08.813] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:38:08.925] j-A [2025-09-23 16:38:16.263] The R5 Autosar Classic is running [2025-09-23 16:38:16.289] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:38:16.289] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:38:16.896] INIT: version 2.96 booting [2025-09-23 16:38:17.008] INIT: Entering runlevel: 5 [2025-09-23 16:38:17.152] mtd24 attached [2025-09-23 16:38:17.168] mtd32 attached [2025-09-23 16:38:17.168] mtd28 attached [2025-09-23 16:38:17.287] ubi0:textures is mounted. [2025-09-23 16:38:17.287] RTNETLINK answers: File exists [2025-09-23 16:38:17.287] ubi2:animations is mounted. [2025-09-23 16:38:17.287] ubi1:dml_code is mounted. [2025-09-23 16:38:17.287] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:38:17.287] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:38:17.287] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:38:17.287] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:38:17.287] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:38:17.287] data.LB_FadeInType0=100 [2025-09-23 16:38:17.287] data.CHLH_FadeInType0=0 [2025-09-23 16:38:17.287] data.WU_FadeInDelay=0 [2025-09-23 16:38:17.287] max_time_out=0 [2025-09-23 16:38:17.287] No splash screen [2025-09-23 16:38:17.287] stop dss Done [2025-09-23 16:38:17.334] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:38:17.374] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:38:17.374] /dev/mem opened. [2025-09-23 16:38:17.374] Memory mapped at address 0xffff88112000. [2025-09-23 16:38:17.374] Read at address 0x00600018 (0xffff88112018): 0x00000000 [2025-09-23 16:38:17.374] Write at address 0x00600018 (0xffff88112018): 0x00400040, readback 0x00400040 [2025-09-23 16:38:17.551] Loaded PowerVR consumer services. [2025-09-23 16:38:17.583] 512+0 records in [2025-09-23 16:38:17.583] 512+0 records out [2025-09-23 16:38:17.599] Waiting data available... [2025-09-23 16:38:17.614] Starting syslogd/klogd: done [2025-09-23 16:38:17.630] DML Start [2025-09-23 16:38:17.822] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:38:18.047] DML res1: 0 [2025-09-23 16:38:18.446] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:38:18.467] Read Success [2025-09-23 16:38:18.467] Verifying certificate... [2025-09-23 16:38:18.754] Verified OK [2025-09-23 16:38:18.786] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:38:20.536] Verified OK [2025-09-23 16:38:20.536] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:38:21.173] Verified OK [2025-09-23 16:38:21.173] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:38:23.731] fs.protected_hardlinks = 1 [2025-09-23 16:38:23.762] fs.protected_symlinks = 1 [2025-09-23 16:38:23.762] kernel.modules_disabled = 1 [2025-09-23 16:38:23.938] [2025-09-23 16:38:23.938] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:38:25.130] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:38:32.906] SBL1:1210.0.1.0 [2025-09-23 16:38:32.954] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:38:34.521] SBL2:1210.0.1.0 [2025-09-23 16:38:34.570] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:38:34.666] j-A [2025-09-23 16:38:42.020] The R5 Autosar Classic is running [2025-09-23 16:38:42.042] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:38:42.042] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:38:42.650] INIT: version 2.96 booting [2025-09-23 16:38:42.761] INIT: Entering runlevel: 5 [2025-09-23 16:38:42.905] mtd28 attached [2025-09-23 16:38:42.921] mtd24 attached [2025-09-23 16:38:42.937] mtd32 attached [2025-09-23 16:38:43.021] RTNETLINK answers: File exists [2025-09-23 16:38:43.021] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:38:43.021] ubi1:textures is mounted. [2025-09-23 16:38:43.021] ubi0:animations is mounted. [2025-09-23 16:38:43.021] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:38:43.021] ubi2:dml_code is mounted. [2025-09-23 16:38:43.021] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:38:43.021] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:38:43.021] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:38:43.042] data.LB_FadeInType0=100 [2025-09-23 16:38:43.042] data.CHLH_FadeInType0=0 [2025-09-23 16:38:43.042] data.WU_FadeInDelay=0 [2025-09-23 16:38:43.042] max_time_out=0 [2025-09-23 16:38:43.042] No splash screen [2025-09-23 16:38:43.042] stop dss Done [2025-09-23 16:38:43.074] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:38:43.074] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:38:43.126] /dev/mem opened. [2025-09-23 16:38:43.126] Memory mapped at address 0xffffa558d000. [2025-09-23 16:38:43.126] Read at address 0x00600018 (0xffffa558d018): 0x00000000 [2025-09-23 16:38:43.126] Write at address 0x00600018 (0xffffa558d018): 0x00400040, readback 0x00400040 [2025-09-23 16:38:43.206] Loaded PowerVR consumer services. [2025-09-23 16:38:43.334] 512+0 records in [2025-09-23 16:38:43.350] 512+0 records out [2025-09-23 16:38:43.350] Waiting data available... [2025-09-23 16:38:43.365] Starting syslogd/klogd: done [2025-09-23 16:38:43.381] DML Start [2025-09-23 16:38:43.590] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:38:43.782] DML res1: 0 [2025-09-23 16:38:44.273] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:38:44.273] Read Success [2025-09-23 16:38:44.273] Verifying certificate... [2025-09-23 16:38:44.513] Verified OK [2025-09-23 16:38:44.529] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:38:46.175] Verified OK [2025-09-23 16:38:46.175] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:38:46.874] Verified OK [2025-09-23 16:38:46.874] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:38:49.512] fs.protected_hardlinks = 1 [2025-09-23 16:38:49.528] fs.protected_symlinks = 1 [2025-09-23 16:38:49.528] kernel.modules_disabled = 1 [2025-09-23 16:38:49.721] [2025-09-23 16:38:49.721] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:38:50.912] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:38:58.658] SBL1:1210.0.1.0 [2025-09-23 16:38:58.706] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:39:00.273] SBL2:1210.0.1.0 [2025-09-23 16:39:00.305] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:39:00.417] j-A [2025-09-23 16:39:07.790] The R5 Autosar Classic is running [2025-09-23 16:39:07.790] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:39:07.790] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:39:08.397] INIT: version 2.96 booting [2025-09-23 16:39:08.509] INIT: Entering runlevel: 5 [2025-09-23 16:39:08.814] mtd24 attached [2025-09-23 16:39:08.814] mtd32 attached [2025-09-23 16:39:08.814] mtd28 attached [2025-09-23 16:39:08.814] ubi0:textures is mounted. [2025-09-23 16:39:08.814] RTNETLINK answers: File exists [2025-09-23 16:39:08.814] ubi1:dml_code is mounted. [2025-09-23 16:39:08.814] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:39:08.814] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:39:08.814] ubi2:animations is mounted. [2025-09-23 16:39:08.814] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:39:08.814] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:39:08.814] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:39:08.814] data.LB_FadeInType0=100 [2025-09-23 16:39:08.814] data.CHLH_FadeInType0=0 [2025-09-23 16:39:08.814] data.WU_FadeInDelay=0 [2025-09-23 16:39:08.814] max_time_out=0 [2025-09-23 16:39:08.814] No splash screen [2025-09-23 16:39:08.814] stop dss Done [2025-09-23 16:39:08.846] /dev/mem opened. [2025-09-23 16:39:08.846] Memory mapped at address 0xffffb5edc000. [2025-09-23 16:39:08.846] Read at address 0x00600018 (0xffffb5edc018): 0x00000000 [2025-09-23 16:39:08.846] Write at address 0x00600018 (0xffffb5edc018): 0x00400040, readback 0x00400040 [2025-09-23 16:39:08.846] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:39:08.846] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:39:08.943] Loaded PowerVR consumer services. [2025-09-23 16:39:09.086] Waiting data available... [2025-09-23 16:39:09.086] 512+0 records in [2025-09-23 16:39:09.102] 512+0 records out [2025-09-23 16:39:09.150] Starting syslogd/klogd: done [2025-09-23 16:39:09.166] DML Start [2025-09-23 16:39:09.342] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:39:09.828] DML res1: 0 [2025-09-23 16:39:09.965] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:39:09.987] Read Success [2025-09-23 16:39:09.987] Verifying certificate... [2025-09-23 16:39:10.210] Verified OK [2025-09-23 16:39:10.226] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:39:11.879] Verified OK [2025-09-23 16:39:11.879] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:39:12.488] Verified OK [2025-09-23 16:39:12.503] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:39:15.141] fs.protected_hardlinks = 1 [2025-09-23 16:39:15.156] fs.protected_symlinks = 1 [2025-09-23 16:39:15.156] kernel.modules_disabled = 1 [2025-09-23 16:39:15.348] [2025-09-23 16:39:15.348] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:39:16.692] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:39:24.421] SBL1:1210.0.1.0 [2025-09-23 16:39:24.453] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:39:26.035] SBL2:1210.0.1.0 [2025-09-23 16:39:26.067] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:39:26.179] j-A [2025-09-23 16:39:33.549] The R5 Autosar Classic is running [2025-09-23 16:39:33.549] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:39:33.549] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:39:34.156] INIT: version 2.96 booting [2025-09-23 16:39:34.268] INIT: Entering runlevel: 5 [2025-09-23 16:39:34.595] mtd32 attached [2025-09-23 16:39:34.595] mtd24 attached [2025-09-23 16:39:34.595] mtd28 attached [2025-09-23 16:39:34.595] RTNETLINK answers: File exists [2025-09-23 16:39:34.595] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:39:34.595] ubi1:textures is mounted. [2025-09-23 16:39:34.595] ubi0:dml_code is mounted. [2025-09-23 16:39:34.595] ubi2:animations is mounted. [2025-09-23 16:39:34.595] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:39:34.595] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:39:34.595] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:39:34.595] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:39:34.595] data.LB_FadeInType0=100 [2025-09-23 16:39:34.595] data.CHLH_FadeInType0=0 [2025-09-23 16:39:34.595] data.WU_FadeInDelay=0 [2025-09-23 16:39:34.595] max_time_out=0 [2025-09-23 16:39:34.595] No splash screen [2025-09-23 16:39:34.595] stop dss Done [2025-09-23 16:39:34.611] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:39:34.611] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:39:34.611] /dev/mem opened. [2025-09-23 16:39:34.611] Memory mapped at address 0xffff8684a000. [2025-09-23 16:39:34.611] Read at address 0x00600018 (0xffff8684a018): 0x00000000 [2025-09-23 16:39:34.611] Write at address 0x00600018 (0xffff8684a018): 0x00400040, readback 0x00400040 [2025-09-23 16:39:34.739] Loaded PowerVR consumer services. [2025-09-23 16:39:34.864] Waiting data available... [2025-09-23 16:39:34.864] 512+0 records in [2025-09-23 16:39:34.864] 512+0 records out [2025-09-23 16:39:34.912] Starting syslogd/klogd: done [2025-09-23 16:39:34.928] DML Start [2025-09-23 16:39:35.088] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:39:35.360] DML res1: 0 [2025-09-23 16:39:35.704] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:39:35.704] Read Success [2025-09-23 16:39:35.704] Verifying certificate... [2025-09-23 16:39:35.943] Verified OK [2025-09-23 16:39:35.959] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:39:37.653] Verified OK [2025-09-23 16:39:37.653] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:39:38.262] Verified OK [2025-09-23 16:39:38.262] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:39:40.946] fs.protected_hardlinks = 1 [2025-09-23 16:39:40.946] fs.protected_symlinks = 1 [2025-09-23 16:39:40.946] kernel.modules_disabled = 1 [2025-09-23 16:39:41.138] [2025-09-23 16:39:41.138] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:39:42.433] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:39:50.206] SBL1:1210.0.1.0 [2025-09-23 16:39:50.238] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:39:51.820] SBL2:1210.0.1.0 [2025-09-23 16:39:51.852] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:39:51.949] j-A [2025-09-23 16:39:59.302] The R5 Autosar Classic is running [2025-09-23 16:39:59.327] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:39:59.327] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:39:59.935] INIT: version 2.96 booting [2025-09-23 16:40:00.046] INIT: Entering runlevel: 5 [2025-09-23 16:40:00.362] mtd32 attached [2025-09-23 16:40:00.362] mtd24 attached [2025-09-23 16:40:00.362] mtd28 attached [2025-09-23 16:40:00.362] ubi0:dml_code is mounted. [2025-09-23 16:40:00.362] RTNETLINK answers: File exists [2025-09-23 16:40:00.362] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:40:00.362] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:40:00.362] ubi2:animations is mounted. [2025-09-23 16:40:00.362] ubi1:textures is mounted. [2025-09-23 16:40:00.362] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:40:00.362] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:40:00.362] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:40:00.362] data.LB_FadeInType0=100 [2025-09-23 16:40:00.362] data.CHLH_FadeInType0=0 [2025-09-23 16:40:00.362] data.WU_FadeInDelay=0 [2025-09-23 16:40:00.362] max_time_out=0 [2025-09-23 16:40:00.362] No splash screen [2025-09-23 16:40:00.362] stop dss Done [2025-09-23 16:40:00.379] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:40:00.379] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:40:00.411] /dev/mem opened. [2025-09-23 16:40:00.411] Memory mapped at address 0xffff8a902000. [2025-09-23 16:40:00.411] Read at address 0x00600018 (0xffff8a902018): 0x00000000 [2025-09-23 16:40:00.411] Write at address 0x00600018 (0xffff8a902018): 0x00400040, readback 0x00400040 [2025-09-23 16:40:00.539] Loaded PowerVR consumer services. [2025-09-23 16:40:00.661] Waiting data available... [2025-09-23 16:40:00.661] 512+0 records in [2025-09-23 16:40:00.661] 512+0 records out [2025-09-23 16:40:00.677] Starting syslogd/klogd: done [2025-09-23 16:40:00.693] DML Start [2025-09-23 16:40:00.885] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:40:01.125] DML res1: 0 [2025-09-23 16:40:01.514] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:40:01.514] Read Success [2025-09-23 16:40:01.514] Verifying certificate... [2025-09-23 16:40:01.737] Verified OK [2025-09-23 16:40:01.753] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:40:03.232] Verified OK [2025-09-23 16:40:03.232] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:40:03.855] Verified OK [2025-09-23 16:40:03.855] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:40:06.669] fs.protected_hardlinks = 1 [2025-09-23 16:40:06.685] fs.protected_symlinks = 1 [2025-09-23 16:40:06.701] kernel.modules_disabled = 1 [2025-09-23 16:40:06.892] [2025-09-23 16:40:06.892] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:40:08.261] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:40:15.960] SBL1:1210.0.1.0 [2025-09-23 16:40:16.008] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:40:17.591] SBL2:1210.0.1.0 [2025-09-23 16:40:17.630] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:40:17.720] j-A [2025-09-23 16:40:25.073] The R5 Autosar Classic is running [2025-09-23 16:40:25.097] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:40:25.097] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:40:25.704] INIT: version 2.96 booting [2025-09-23 16:40:26.113] INIT: Entering runlevel: 5 [2025-09-23 16:40:26.113] mtd24 attached [2025-09-23 16:40:26.113] mtd28 attached [2025-09-23 16:40:26.113] mtd32 attached [2025-09-23 16:40:26.113] RTNETLINK answers: File exists [2025-09-23 16:40:26.113] ubi0:textures is mounted. [2025-09-23 16:40:26.113] ubi1:animations is mounted. [2025-09-23 16:40:26.113] ubi2:dml_code is mounted. [2025-09-23 16:40:26.113] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:40:26.113] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:40:26.113] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:40:26.113] data.LB_FadeInType0=100 [2025-09-23 16:40:26.113] data.CHLH_FadeInType0=0 [2025-09-23 16:40:26.113] data.WU_FadeInDelay=0 [2025-09-23 16:40:26.113] max_time_out=0 [2025-09-23 16:40:26.113] No splash screen [2025-09-23 16:40:26.113] stop dss Done [2025-09-23 16:40:26.113] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:40:26.113] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:40:26.169] /dev/mem opened. [2025-09-23 16:40:26.169] Memory mapped at address 0xffff8b4ec000. [2025-09-23 16:40:26.169] Read at address 0x00600018 (0xffff8b4ec018): 0x00000000 [2025-09-23 16:40:26.169] Write at address 0x00600018 (0xffff8b4ec018): 0x00400040, readback 0x00400040 [2025-09-23 16:40:26.217] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:40:26.233] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:40:26.360] Loaded PowerVR consumer services. [2025-09-23 16:40:26.422] 512+0 records in [2025-09-23 16:40:26.422] 512+0 records out [2025-09-23 16:40:26.422] Waiting data available... [2025-09-23 16:40:26.438] Starting syslogd/klogd: done [2025-09-23 16:40:26.454] DML Start [2025-09-23 16:40:26.614] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:40:27.113] DML res1: 0 [2025-09-23 16:40:27.295] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:40:27.295] Read Success [2025-09-23 16:40:27.295] Verifying certificate... [2025-09-23 16:40:27.519] Verified OK [2025-09-23 16:40:27.535] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:40:29.118] Verified OK [2025-09-23 16:40:29.118] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:40:29.741] Verified OK [2025-09-23 16:40:29.741] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:40:32.459] fs.protected_hardlinks = 1 [2025-09-23 16:40:32.459] fs.protected_symlinks = 1 [2025-09-23 16:40:32.475] kernel.modules_disabled = 1 [2025-09-23 16:40:32.666] [2025-09-23 16:40:32.666] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:40:33.958] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:40:41.723] SBL1:1210.0.1.0 [2025-09-23 16:40:41.755] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:40:43.338] SBL2:1210.0.1.0 [2025-09-23 16:40:43.382] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:40:43.481] j-A [2025-09-23 16:40:50.851] The R5 Autosar Classic is running [2025-09-23 16:40:50.851] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:40:50.851] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:40:51.459] INIT: version 2.96 booting [2025-09-23 16:40:51.570] INIT: Entering runlevel: 5 [2025-09-23 16:40:51.730] mtd28 attached [2025-09-23 16:40:51.730] mtd32 attached [2025-09-23 16:40:51.746] mtd24 attached [2025-09-23 16:40:51.794] RTNETLINK answers: File exists [2025-09-23 16:40:51.839] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:40:51.839] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:40:51.839] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:40:51.839] ubi0:animations is mounted. [2025-09-23 16:40:51.839] ubi1:dml_code is mounted. [2025-09-23 16:40:51.839] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:40:51.839] ubi2:textures is mounted. [2025-09-23 16:40:51.839] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:40:52.225] data.LB_FadeInType0=100 [2025-09-23 16:40:52.225] data.CHLH_FadeInType0=0 [2025-09-23 16:40:52.225] data.WU_FadeInDelay=0 [2025-09-23 16:40:52.225] max_time_out=0 [2025-09-23 16:40:52.225] No splash screen [2025-09-23 16:40:52.225] stop dss Done [2025-09-23 16:40:52.225] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:40:52.225] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:40:52.225] /dev/mem opened. [2025-09-23 16:40:52.225] Memory mapped at address 0xffff981a2000. [2025-09-23 16:40:52.225] Read at address 0x00600018 (0xffff981a2018): 0x00000000 [2025-09-23 16:40:52.225] Write at address 0x00600018 (0xffff981a2018): 0x00400040, readback 0x00400040 [2025-09-23 16:40:52.225] Loaded PowerVR consumer services. [2025-09-23 16:40:52.225] 512+0 records in [2025-09-23 16:40:52.225] 512+0 records out [2025-09-23 16:40:52.225] Starting syslogd/klogd: Waiting data available... [2025-09-23 16:40:52.225] done [2025-09-23 16:40:52.225] DML Start [2025-09-23 16:40:52.395] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:40:52.618] DML res1: 0 [2025-09-23 16:40:53.107] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:40:53.107] Read Success [2025-09-23 16:40:53.107] Verifying certificate... [2025-09-23 16:40:53.330] Verified OK [2025-09-23 16:40:53.346] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:40:55.006] Verified OK [2025-09-23 16:40:55.006] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:40:55.627] Verified OK [2025-09-23 16:40:55.627] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:40:58.329] fs.protected_hardlinks = 1 [2025-09-23 16:40:58.344] fs.protected_symlinks = 1 [2025-09-23 16:40:58.344] kernel.modules_disabled = 1 [2025-09-23 16:40:58.536] [2025-09-23 16:40:58.536] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:40:59.710] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:41:07.490] SBL1:1210.0.1.0 [2025-09-23 16:41:07.521] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:41:09.103] SBL2:1210.0.1.0 [2025-09-23 16:41:09.135] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:41:09.248] j-A [2025-09-23 16:41:16.618] The R5 Autosar Classic is running [2025-09-23 16:41:16.618] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:41:16.618] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:41:17.224] INIT: version 2.96 booting [2025-09-23 16:41:17.337] INIT: Entering runlevel: 5 [2025-09-23 16:41:17.662] mtd32 attached [2025-09-23 16:41:17.662] mtd28 attached [2025-09-23 16:41:17.662] mtd24 attached [2025-09-23 16:41:17.662] RTNETLINK answers: File exists [2025-09-23 16:41:17.662] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:41:17.662] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:41:17.662] ubi2:textures is mounted. [2025-09-23 16:41:17.662] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:41:17.662] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:41:17.662] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:41:17.662] ubi1:animations is mounted. [2025-09-23 16:41:17.662] ubi0:dml_code is mounted. [2025-09-23 16:41:17.662] data.LB_FadeInType0=100 [2025-09-23 16:41:17.662] data.CHLH_FadeInType0=0 [2025-09-23 16:41:17.662] data.WU_FadeInDelay=0 [2025-09-23 16:41:17.662] max_time_out=0 [2025-09-23 16:41:17.662] No splash screen [2025-09-23 16:41:17.662] stop dss Done [2025-09-23 16:41:17.662] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:41:17.662] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:41:17.695] /dev/mem opened. [2025-09-23 16:41:17.695] Memory mapped at address 0xffff9c1e0000. [2025-09-23 16:41:17.695] Read at address 0x00600018 (0xffff9c1e0018): 0x00000000 [2025-09-23 16:41:17.695] Write at address 0x00600018 (0xffff9c1e0018): 0x00400040, readback 0x00400040 [2025-09-23 16:41:17.775] Loaded PowerVR consumer services. [2025-09-23 16:41:17.919] 512+0 records in [2025-09-23 16:41:17.919] 512+0 records out [2025-09-23 16:41:17.935] Waiting data available... [2025-09-23 16:41:17.967] Starting syslogd/klogd: done [2025-09-23 16:41:17.983] DML Start [2025-09-23 16:41:18.127] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:41:18.319] DML res1: 0 [2025-09-23 16:41:18.858] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:41:18.858] Read Success [2025-09-23 16:41:18.858] Verifying certificate... [2025-09-23 16:41:19.082] Verified OK [2025-09-23 16:41:19.098] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:41:20.882] Verified OK [2025-09-23 16:41:20.882] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:41:21.438] Verified OK [2025-09-23 16:41:21.438] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:41:24.076] fs.protected_hardlinks = 1 [2025-09-23 16:41:24.101] fs.protected_symlinks = 1 [2025-09-23 16:41:24.101] kernel.modules_disabled = 1 [2025-09-23 16:41:24.283] [2025-09-23 16:41:24.283] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:41:25.480] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:41:33.256] SBL1:1210.0.1.0 [2025-09-23 16:41:33.304] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:41:34.871] SBL2:1210.0.1.0 [2025-09-23 16:41:34.915] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:41:35.015] j-A [2025-09-23 16:41:42.369] The R5 Autosar Classic is running [2025-09-23 16:41:42.369] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:41:42.390] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:41:42.997] INIT: version 2.96 booting [2025-09-23 16:41:43.109] INIT: Entering runlevel: 5 [2025-09-23 16:41:43.253] mtd24 attached [2025-09-23 16:41:43.269] mtd28 attached [2025-09-23 16:41:43.285] mtd32 attached [2025-09-23 16:41:43.424] RTNETLINK answers: File exists [2025-09-23 16:41:43.425] ubi0:textures is mounted. [2025-09-23 16:41:43.425] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:41:43.425] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:41:43.425] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:41:43.425] ubi1:animations is mounted. [2025-09-23 16:41:43.425] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:41:43.425] ubi2:dml_code is mounted. [2025-09-23 16:41:43.425] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:41:43.425] data.LB_FadeInType0=100 [2025-09-23 16:41:43.425] data.CHLH_FadeInType0=0 [2025-09-23 16:41:43.425] data.WU_FadeInDelay=0 [2025-09-23 16:41:43.425] max_time_out=0 [2025-09-23 16:41:43.425] No splash screen [2025-09-23 16:41:43.425] stop dss Done [2025-09-23 16:41:43.425] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:41:43.425] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:41:43.465] /dev/mem opened. [2025-09-23 16:41:43.465] Memory mapped at address 0xffffb1a28000. [2025-09-23 16:41:43.465] Read at address 0x00600018 (0xffffb1a28018): 0x00000000 [2025-09-23 16:41:43.465] Write at address 0x00600018 (0xffffb1a28018): 0x00400040, readback 0x00400040 [2025-09-23 16:41:43.544] Loaded PowerVR consumer services. [2025-09-23 16:41:43.688] 512+0 records in [2025-09-23 16:41:43.688] 512+0 records out [2025-09-23 16:41:43.704] Waiting data available... [2025-09-23 16:41:43.720] Starting syslogd/klogd: done [2025-09-23 16:41:43.752] DML Start [2025-09-23 16:41:43.912] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:41:44.136] DML res1: 0 [2025-09-23 16:41:44.644] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:41:44.644] Read Success [2025-09-23 16:41:44.644] Verifying certificate... [2025-09-23 16:41:44.899] Verified OK [2025-09-23 16:41:44.915] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:41:46.572] Verified OK [2025-09-23 16:41:46.572] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:41:47.154] Verified OK [2025-09-23 16:41:47.154] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:41:49.857] fs.protected_hardlinks = 1 [2025-09-23 16:41:49.873] fs.protected_symlinks = 1 [2025-09-23 16:41:49.873] kernel.modules_disabled = 1 [2025-09-23 16:41:50.081] [2025-09-23 16:41:50.081] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:41:51.261] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:41:59.020] SBL1:1210.0.1.0 [2025-09-23 16:41:59.052] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:42:00.635] SBL2:1210.0.1.0 [2025-09-23 16:42:00.667] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:42:00.764] j-A [2025-09-23 16:42:08.118] The R5 Autosar Classic is running [2025-09-23 16:42:08.142] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:42:08.142] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:42:08.749] INIT: version 2.96 booting [2025-09-23 16:42:08.860] INIT: Entering runlevel: 5 [2025-09-23 16:42:09.020] mtd24 attached [2025-09-23 16:42:09.020] mtd28 attached [2025-09-23 16:42:09.036] mtd32 attached [2025-09-23 16:42:09.128] RTNETLINK answers: File exists [2025-09-23 16:42:09.128] ubi0:textures is mounted. [2025-09-23 16:42:09.128] ubi1:animations is mounted. [2025-09-23 16:42:09.128] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:42:09.128] ubi2:dml_code is mounted. [2025-09-23 16:42:09.128] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:42:09.128] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:42:09.128] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:42:09.128] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:42:09.191] data.LB_FadeInType0=100 [2025-09-23 16:42:09.191] data.CHLH_FadeInType0=0 [2025-09-23 16:42:09.191] data.WU_FadeInDelay=0 [2025-09-23 16:42:09.191] max_time_out=0 [2025-09-23 16:42:09.191] No splash screen [2025-09-23 16:42:09.191] stop dss Done [2025-09-23 16:42:09.191] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:42:09.191] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:42:09.240] /dev/mem opened. [2025-09-23 16:42:09.240] Memory mapped at address 0xffffad336000. [2025-09-23 16:42:09.240] Read at address 0x00600018 (0xffffad336018): 0x00000000 [2025-09-23 16:42:09.240] Write at address 0x00600018 (0xffffad336018): 0x00400040, readback 0x00400040 [2025-09-23 16:42:09.431] Loaded PowerVR consumer services. [2025-09-23 16:42:09.476] Waiting data available... [2025-09-23 16:42:09.476] 512+0 records in [2025-09-23 16:42:09.476] 512+0 records out [2025-09-23 16:42:09.508] Starting syslogd/klogd: done [2025-09-23 16:42:09.524] DML Start [2025-09-23 16:42:09.684] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:42:09.924] DML res1: 0 [2025-09-23 16:42:10.404] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:42:10.425] Read Success [2025-09-23 16:42:10.425] Verifying certificate... [2025-09-23 16:42:10.680] Verified OK [2025-09-23 16:42:10.696] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:42:12.337] Verified OK [2025-09-23 16:42:12.337] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:42:12.992] Verified OK [2025-09-23 16:42:12.992] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:42:15.566] fs.protected_hardlinks = 1 [2025-09-23 16:42:15.566] fs.protected_symlinks = 1 [2025-09-23 16:42:15.582] kernel.modules_disabled = 1 [2025-09-23 16:42:15.773] [2025-09-23 16:42:15.773] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:42:17.053] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:42:24.768] SBL1:1210.0.1.0 [2025-09-23 16:42:24.816] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:42:26.383] SBL2:1210.0.1.0 [2025-09-23 16:42:26.430] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:42:26.526] j-A [2025-09-23 16:42:33.881] The R5 Autosar Classic is running [2025-09-23 16:42:33.904] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:42:33.904] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:42:34.513] INIT: version 2.96 booting [2025-09-23 16:42:34.624] INIT: Entering runlevel: 5 [2025-09-23 16:42:34.767] mtd24 attached [2025-09-23 16:42:34.783] mtd28 attached [2025-09-23 16:42:34.799] mtd32 attached [2025-09-23 16:42:34.938] ubi0:textures is mounted. [2025-09-23 16:42:34.939] RTNETLINK answers: File exists [2025-09-23 16:42:34.939] ubi1:animations is mounted. [2025-09-23 16:42:34.939] ubi2:dml_code is mounted. [2025-09-23 16:42:34.939] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:42:34.939] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:42:34.939] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:42:34.939] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:42:34.939] data.LB_FadeInType0=100 [2025-09-23 16:42:34.939] data.CHLH_FadeInType0=0 [2025-09-23 16:42:34.939] data.WU_FadeInDelay=0 [2025-09-23 16:42:34.939] max_time_out=0 [2025-09-23 16:42:34.939] No splash screen [2025-09-23 16:42:34.939] stop dss Done [2025-09-23 16:42:34.939] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:42:34.950] /dev/mem opened. [2025-09-23 16:42:34.996] Memory mapped at address 0xffffa09f2000. [2025-09-23 16:42:34.996] Read at address 0x00600018 (0xffffa09f2018): 0x00000000 [2025-09-23 16:42:34.996] Write at address 0x00600018 (0xffffa09f2018): 0x00400040, readback 0x00400040 [2025-09-23 16:42:34.996] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:42:34.996] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:42:35.060] Loaded PowerVR consumer services. [2025-09-23 16:42:35.204] 512+0 records in [2025-09-23 16:42:35.204] 512+0 records out [2025-09-23 16:42:35.204] Waiting data available... [2025-09-23 16:42:35.236] Starting syslogd/klogd: done [2025-09-23 16:42:35.252] DML Start [2025-09-23 16:42:35.460] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:42:35.684] DML res1: 0 [2025-09-23 16:42:36.099] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:42:36.115] Read Success [2025-09-23 16:42:36.115] Verifying certificate... [2025-09-23 16:42:36.371] Verified OK [2025-09-23 16:42:36.387] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:42:38.196] Verified OK [2025-09-23 16:42:38.197] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:42:38.808] Verified OK [2025-09-23 16:42:38.808] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:42:41.301] fs.protected_hardlinks = 1 [2025-09-23 16:42:41.317] fs.protected_symlinks = 1 [2025-09-23 16:42:41.333] kernel.modules_disabled = 1 [2025-09-23 16:42:41.526] [2025-09-23 16:42:41.526] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:42:42.800] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:42:50.548] SBL1:1210.0.1.0 [2025-09-23 16:42:50.580] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:42:52.163] SBL2:1210.0.1.0 [2025-09-23 16:42:52.200] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:42:52.290] j-A [2025-09-23 16:42:59.645] The R5 Autosar Classic is running [2025-09-23 16:42:59.670] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:42:59.670] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:43:00.278] INIT: version 2.96 booting [2025-09-23 16:43:00.389] INIT: Entering runlevel: 5 [2025-09-23 16:43:00.684] mtd24 attached [2025-09-23 16:43:00.684] mtd28 attached [2025-09-23 16:43:00.684] mtd32 attached [2025-09-23 16:43:00.684] ubi1:animations is mounted. [2025-09-23 16:43:00.684] RTNETLINK answers: File exists [2025-09-23 16:43:00.684] ubi0:textures is mounted. [2025-09-23 16:43:00.684] ubi2:dml_code is mounted. [2025-09-23 16:43:00.684] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:43:00.684] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:43:00.684] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:43:00.684] data.LB_FadeInType0=100 [2025-09-23 16:43:00.684] data.CHLH_FadeInType0=0 [2025-09-23 16:43:00.684] data.WU_FadeInDelay=0 [2025-09-23 16:43:00.684] max_time_out=0 [2025-09-23 16:43:00.684] No splash screen [2025-09-23 16:43:00.684] stop dss Done [2025-09-23 16:43:00.684] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:43:00.684] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:43:00.718] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:43:00.762] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:43:00.762] /dev/mem opened. [2025-09-23 16:43:00.762] Memory mapped at address 0xffffaa280000. [2025-09-23 16:43:00.762] Read at address 0x00600018 (0xffffaa280018): 0x00000000 [2025-09-23 16:43:00.762] Write at address 0x00600018 (0xffffaa280018): 0x00400040, readback 0x00400040 [2025-09-23 16:43:00.858] Loaded PowerVR consumer services. [2025-09-23 16:43:00.954] 512+0 records in [2025-09-23 16:43:00.954] 512+0 records out [2025-09-23 16:43:00.986] Starting syslogd/klogd: done [2025-09-23 16:43:01.002] Waiting data available... [2025-09-23 16:43:01.002] DML Start [2025-09-23 16:43:01.210] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:43:01.417] DML res1: 0 [2025-09-23 16:43:01.889] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:43:01.889] Read Success [2025-09-23 16:43:01.889] Verifying certificate... [2025-09-23 16:43:02.176] Verified OK [2025-09-23 16:43:02.192] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:43:03.871] Verified OK [2025-09-23 16:43:03.910] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:43:04.480] Verified OK [2025-09-23 16:43:04.480] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:43:07.038] fs.protected_hardlinks = 1 [2025-09-23 16:43:07.054] fs.protected_symlinks = 1 [2025-09-23 16:43:07.054] kernel.modules_disabled = 1 [2025-09-23 16:43:07.262] [2025-09-23 16:43:07.262] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:43:08.484] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:43:16.294] SBL1:1210.0.1.0 [2025-09-23 16:43:16.342] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:43:17.908] SBL2:1210.0.1.0 [2025-09-23 16:43:17.950] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:43:18.053] j-A [2025-09-23 16:43:25.407] The R5 Autosar Classic is running [2025-09-23 16:43:25.407] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:43:25.428] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:43:26.035] INIT: version 2.96 booting [2025-09-23 16:43:26.148] INIT: Entering runlevel: 5 [2025-09-23 16:43:26.291] mtd24 attached [2025-09-23 16:43:26.307] mtd28 attached [2025-09-23 16:43:26.323] mtd32 attached [2025-09-23 16:43:26.477] ubi0:textures is mounted. [2025-09-23 16:43:26.478] RTNETLINK answers: File exists [2025-09-23 16:43:26.478] ubi1:animations is mounted. [2025-09-23 16:43:26.478] ubi2:dml_code is mounted. [2025-09-23 16:43:26.478] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:43:26.478] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:43:26.478] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:43:26.478] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:43:26.478] data.LB_FadeInType0=100 [2025-09-23 16:43:26.478] data.CHLH_FadeInType0=0 [2025-09-23 16:43:26.478] data.WU_FadeInDelay=0 [2025-09-23 16:43:26.478] max_time_out=0 [2025-09-23 16:43:26.478] No splash screen [2025-09-23 16:43:26.478] stop dss Done [2025-09-23 16:43:26.478] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:43:26.511] /dev/mem opened. [2025-09-23 16:43:26.511] Memory mapped at address 0xffff8a997000. [2025-09-23 16:43:26.511] Read at address 0x00600018 (0xffff8a997018): 0x00000000 [2025-09-23 16:43:26.511] Write at address 0x00600018 (0xffff8a997018): 0x00400040, readback 0x00400040 [2025-09-23 16:43:26.543] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:43:26.559] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:43:26.703] Loaded PowerVR consumer services. [2025-09-23 16:43:26.752] 512+0 records in [2025-09-23 16:43:26.752] 512+0 records out [2025-09-23 16:43:26.799] Starting syslogd/klogd: Waiting data available... [2025-09-23 16:43:26.815] done [2025-09-23 16:43:26.815] DML Start [2025-09-23 16:43:26.991] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:43:27.214] DML res1: 0 [2025-09-23 16:43:27.694] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:43:27.710] Read Success [2025-09-23 16:43:27.710] Verifying certificate... [2025-09-23 16:43:27.966] Verified OK [2025-09-23 16:43:27.982] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:43:29.660] Verified OK [2025-09-23 16:43:29.660] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:43:30.324] Verified OK [2025-09-23 16:43:30.324] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:43:32.994] fs.protected_hardlinks = 1 [2025-09-23 16:43:33.010] fs.protected_symlinks = 1 [2025-09-23 16:43:33.010] kernel.modules_disabled = 1 [2025-09-23 16:43:33.202] [2025-09-23 16:43:33.202] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:43:34.320] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:43:42.064] SBL1:1210.0.1.0 [2025-09-23 16:43:42.095] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:43:43.679] SBL2:1210.0.1.0 [2025-09-23 16:43:43.711] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:43:43.823] j-A [2025-09-23 16:43:51.193] The R5 Autosar Classic is running [2025-09-23 16:43:51.193] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:43:51.193] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:43:51.800] INIT: version 2.96 booting [2025-09-23 16:43:51.913] INIT: Entering runlevel: 5 [2025-09-23 16:43:52.232] mtd32 attached [2025-09-23 16:43:52.232] mtd28 attached [2025-09-23 16:43:52.232] mtd24 attached [2025-09-23 16:43:52.232] RTNETLINK answers: File exists [2025-09-23 16:43:52.232] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:43:52.232] ubi1:animations is mounted. [2025-09-23 16:43:52.232] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:43:52.232] ubi2:textures is mounted. [2025-09-23 16:43:52.232] ubi0:dml_code is mounted. [2025-09-23 16:43:52.232] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:43:52.232] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:43:52.232] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:43:52.232] data.LB_FadeInType0=100 [2025-09-23 16:43:52.232] data.CHLH_FadeInType0=0 [2025-09-23 16:43:52.232] data.WU_FadeInDelay=0 [2025-09-23 16:43:52.232] max_time_out=0 [2025-09-23 16:43:52.232] No splash screen [2025-09-23 16:43:52.232] stop dss Done [2025-09-23 16:43:52.275] /dev/mem opened. [2025-09-23 16:43:52.275] Memory mapped at address 0xffffa82b8000. [2025-09-23 16:43:52.275] Read at address 0x00600018 (0xffffa82b8018): 0x00000000 [2025-09-23 16:43:52.275] Write at address 0x00600018 (0xffffa82b8018): 0x00400040, readback 0x00400040 [2025-09-23 16:43:52.291] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:43:52.307] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:43:52.451] Loaded PowerVR consumer services. [2025-09-23 16:43:52.483] 512+0 records in [2025-09-23 16:43:52.483] 512+0 records out [2025-09-23 16:43:52.531] Starting syslogd/klogd: Waiting data available... [2025-09-23 16:43:52.563] done [2025-09-23 16:43:52.563] DML Start [2025-09-23 16:43:52.723] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:43:52.995] DML res1: 0 [2025-09-23 16:43:53.427] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:43:53.745] Read Success [2025-09-23 16:43:53.745] Verifying certificate... [2025-09-23 16:43:53.746] Verified OK [2025-09-23 16:43:53.746] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:43:55.358] Verified OK [2025-09-23 16:43:55.358] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:43:55.981] Verified OK [2025-09-23 16:43:55.981] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:43:58.697] fs.protected_hardlinks = 1 [2025-09-23 16:43:58.697] fs.protected_symlinks = 1 [2025-09-23 16:43:58.697] kernel.modules_disabled = 1 [2025-09-23 16:43:58.871] [2025-09-23 16:43:58.871] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:44:00.038] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:44:07.800] SBL1:1210.0.1.0 [2025-09-23 16:44:07.848] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:44:09.415] SBL2:1210.0.1.0 [2025-09-23 16:44:09.463] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:44:09.559] j-A [2025-09-23 16:44:16.913] The R5 Autosar Classic is running [2025-09-23 16:44:16.935] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:44:16.935] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:44:17.543] INIT: version 2.96 booting [2025-09-23 16:44:17.950] INIT: Entering runlevel: 5 [2025-09-23 16:44:17.950] mtd28 attached [2025-09-23 16:44:17.950] mtd24 attached [2025-09-23 16:44:17.950] mtd32 attached [2025-09-23 16:44:17.950] RTNETLINK answers: File exists [2025-09-23 16:44:17.950] ubi0:animations is mounted. [2025-09-23 16:44:17.950] ubi1:textures is mounted. [2025-09-23 16:44:17.950] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:44:17.950] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:44:17.950] ubi2:dml_code is mounted. [2025-09-23 16:44:17.950] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:44:17.950] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:44:17.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:44:17.950] data.LB_FadeInType0=100 [2025-09-23 16:44:17.950] data.CHLH_FadeInType0=0 [2025-09-23 16:44:17.950] data.WU_FadeInDelay=0 [2025-09-23 16:44:17.950] max_time_out=0 [2025-09-23 16:44:17.950] No splash screen [2025-09-23 16:44:17.950] stop dss Done [2025-09-23 16:44:18.039] /dev/mem opened. [2025-09-23 16:44:18.039] Memory mapped at address 0xffff9f07f000. [2025-09-23 16:44:18.039] Read at address 0x00600018 (0xffff9f07f018): 0x00000000 [2025-09-23 16:44:18.039] Write at address 0x00600018 (0xffff9f07f018): 0x00400040, readback 0x00400040 [2025-09-23 16:44:18.039] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:44:18.039] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:44:18.216] Loaded PowerVR consumer services. [2025-09-23 16:44:18.247] 512+0 records in [2025-09-23 16:44:18.247] 512+0 records out [2025-09-23 16:44:18.279] Waiting data available... [2025-09-23 16:44:18.295] Starting syslogd/klogd: done [2025-09-23 16:44:18.311] DML Start [2025-09-23 16:44:18.487] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:44:18.966] DML res1: 0 [2025-09-23 16:44:19.143] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:44:19.171] Read Success [2025-09-23 16:44:19.171] Verifying certificate... [2025-09-23 16:44:19.411] Verified OK [2025-09-23 16:44:19.426] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:44:21.072] Verified OK [2025-09-23 16:44:21.072] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:44:21.702] Verified OK [2025-09-23 16:44:21.702] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:44:24.372] fs.protected_hardlinks = 1 [2025-09-23 16:44:24.388] fs.protected_symlinks = 1 [2025-09-23 16:44:24.404] kernel.modules_disabled = 1 [2025-09-23 16:44:24.595] [2025-09-23 16:44:24.595] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:44:25.826] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:44:33.577] SBL1:1210.0.1.0 [2025-09-23 16:44:33.625] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:44:35.190] SBL2:1210.0.1.0 [2025-09-23 16:44:35.238] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:44:35.334] j-A [2025-09-23 16:44:42.688] The R5 Autosar Classic is running [2025-09-23 16:44:42.709] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:44:42.709] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:44:43.318] INIT: version 2.96 booting [2025-09-23 16:44:43.429] INIT: Entering runlevel: 5 [2025-09-23 16:44:43.573] mtd24 attached [2025-09-23 16:44:43.589] mtd28 attached [2025-09-23 16:44:43.605] mtd32 attached [2025-09-23 16:44:43.760] ubi0:textures is mounted. [2025-09-23 16:44:43.760] RTNETLINK answers: File exists [2025-09-23 16:44:43.761] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:44:43.761] ubi1:animations is mounted. [2025-09-23 16:44:43.761] ubi2:dml_code is mounted. [2025-09-23 16:44:43.761] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:44:43.761] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:44:43.761] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:44:43.761] data.LB_FadeInType0=100 [2025-09-23 16:44:43.761] data.CHLH_FadeInType0=0 [2025-09-23 16:44:43.761] data.WU_FadeInDelay=0 [2025-09-23 16:44:43.761] max_time_out=0 [2025-09-23 16:44:43.761] No splash screen [2025-09-23 16:44:43.761] stop dss Done [2025-09-23 16:44:43.761] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:44:43.761] /dev/mem opened. [2025-09-23 16:44:43.761] Memory mapped at address 0xffff9c220000. [2025-09-23 16:44:43.780] Read at address 0x00600018 (0xffff9c220018): 0x00000000 [2025-09-23 16:44:43.780] Write at address 0x00600018 (0xffff9c220018): 0x00400040, readback 0x00400040 [2025-09-23 16:44:43.796] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:44:43.812] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:44:43.971] Loaded PowerVR consumer services. [2025-09-23 16:44:44.020] 512+0 records in [2025-09-23 16:44:44.020] 512+0 records out [2025-09-23 16:44:44.052] Waiting data available... [2025-09-23 16:44:44.068] Starting syslogd/klogd: done [2025-09-23 16:44:44.084] DML Start [2025-09-23 16:44:44.260] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:44:44.467] DML res1: 0 [2025-09-23 16:44:45.004] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:44:45.004] Read Success [2025-09-23 16:44:45.004] Verifying certificate... [2025-09-23 16:44:45.275] Verified OK [2025-09-23 16:44:45.292] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:44:46.900] Verified OK [2025-09-23 16:44:46.900] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:44:47.411] Verified OK [2025-09-23 16:44:47.411] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:44:50.211] fs.protected_hardlinks = 1 [2025-09-23 16:44:50.223] fs.protected_symlinks = 1 [2025-09-23 16:44:50.223] kernel.modules_disabled = 1 [2025-09-23 16:44:50.415] [2025-09-23 16:44:50.415] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:44:51.609] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:44:59.360] SBL1:1210.0.1.0 [2025-09-23 16:44:59.408] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:45:00.974] SBL2:1210.0.1.0 [2025-09-23 16:45:01.016] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:45:01.118] j-A [2025-09-23 16:45:08.472] The R5 Autosar Classic is running [2025-09-23 16:45:08.472] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:45:08.493] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:45:09.101] INIT: version 2.96 booting [2025-09-23 16:45:09.212] INIT: Entering runlevel: 5 [2025-09-23 16:45:09.372] mtd32 attached [2025-09-23 16:45:09.372] mtd24 attached [2025-09-23 16:45:09.388] mtd28 attached [2025-09-23 16:45:09.436] ubi0:dml_code is mounted. [2025-09-23 16:45:09.542] RTNETLINK answers: File exists [2025-09-23 16:45:09.542] ubi1:textures is mounted. [2025-09-23 16:45:09.542] ubi2:animations is mounted. [2025-09-23 16:45:09.542] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:45:09.542] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:45:09.542] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:45:09.542] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:45:09.542] data.LB_FadeInType0=100 [2025-09-23 16:45:09.543] data.CHLH_FadeInType0=0 [2025-09-23 16:45:09.543] data.WU_FadeInDelay=0 [2025-09-23 16:45:09.543] max_time_out=0 [2025-09-23 16:45:09.543] No splash screen [2025-09-23 16:45:09.543] stop dss Done [2025-09-23 16:45:09.543] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:45:09.574] /dev/mem opened. [2025-09-23 16:45:09.574] Memory mapped at address 0xffff91205000. [2025-09-23 16:45:09.574] Read at address 0x00600018 (0xffff91205018): 0x00000000 [2025-09-23 16:45:09.574] Write at address 0x00600018 (0xffff91205018): 0x00400040, readback 0x00400040 [2025-09-23 16:45:09.574] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:45:09.574] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:45:09.782] Loaded PowerVR consumer services. [2025-09-23 16:45:09.841] 512+0 records in [2025-09-23 16:45:09.841] 512+0 records out [2025-09-23 16:45:09.841] Waiting data available... [2025-09-23 16:45:09.874] Starting syslogd/klogd: done [2025-09-23 16:45:09.890] DML Start [2025-09-23 16:45:10.081] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:45:10.305] DML res1: 0 [2025-09-23 16:45:10.689] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:45:10.710] Read Success [2025-09-23 16:45:10.710] Verifying certificate... [2025-09-23 16:45:10.966] Verified OK [2025-09-23 16:45:10.981] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:45:12.733] Verified OK [2025-09-23 16:45:12.733] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:45:13.317] Verified OK [2025-09-23 16:45:13.317] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:45:15.920] fs.protected_hardlinks = 1 [2025-09-23 16:45:15.920] fs.protected_symlinks = 1 [2025-09-23 16:45:15.920] kernel.modules_disabled = 1 [2025-09-23 16:45:16.097] [2025-09-23 16:45:16.097] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:45:17.432] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:45:25.131] SBL1:1210.0.1.0 [2025-09-23 16:45:25.179] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:45:26.745] SBL2:1210.0.1.0 [2025-09-23 16:45:26.777] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:45:26.889] j-A [2025-09-23 16:45:34.243] The R5 Autosar Classic is running [2025-09-23 16:45:34.243] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:45:34.264] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:45:34.871] INIT: version 2.96 booting [2025-09-23 16:45:35.265] INIT: Entering runlevel: 5 [2025-09-23 16:45:35.265] mtd28 attached [2025-09-23 16:45:35.265] mtd24 attached [2025-09-23 16:45:35.265] mtd32 attached [2025-09-23 16:45:35.265] ubi0:animations is mounted. [2025-09-23 16:45:35.265] RTNETLINK answers: File exists [2025-09-23 16:45:35.265] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:45:35.265] ubi2:dml_code is mounted. [2025-09-23 16:45:35.265] ubi1:textures is mounted. [2025-09-23 16:45:35.265] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:45:35.265] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:45:35.271] data.LB_FadeInType0=100 [2025-09-23 16:45:35.271] data.CHLH_FadeInType0=0 [2025-09-23 16:45:35.271] data.WU_FadeInDelay=0 [2025-09-23 16:45:35.271] max_time_out=0 [2025-09-23 16:45:35.271] No splash screen [2025-09-23 16:45:35.271] stop dss Done [2025-09-23 16:45:35.271] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:45:35.271] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:45:35.303] /dev/mem opened. [2025-09-23 16:45:35.303] Memory mapped at address 0xffffaf2fe000. [2025-09-23 16:45:35.329] Read at address 0x00600018 (0xffffaf2fe018): 0x00000000 [2025-09-23 16:45:35.329] Write at address 0x00600018 (0xffffaf2fe018): 0x00400040, readback 0x00400040 [2025-09-23 16:45:35.345] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:45:35.361] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:45:35.505] Loaded PowerVR consumer services. [2025-09-23 16:45:35.569] 512+0 records in [2025-09-23 16:45:35.569] 512+0 records out [2025-09-23 16:45:35.585] Waiting data available... [2025-09-23 16:45:35.617] Starting syslogd/klogd: done [2025-09-23 16:45:35.633] DML Start [2025-09-23 16:45:35.825] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:45:36.065] DML res1: 0 [2025-09-23 16:45:36.473] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:45:36.473] Read Success [2025-09-23 16:45:36.473] Verifying certificate... [2025-09-23 16:45:36.745] Verified OK [2025-09-23 16:45:36.777] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:45:38.428] Verified OK [2025-09-23 16:45:38.429] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:45:39.110] Verified OK [2025-09-23 16:45:39.110] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:45:41.716] fs.protected_hardlinks = 1 [2025-09-23 16:45:41.732] fs.protected_symlinks = 1 [2025-09-23 16:45:41.748] kernel.modules_disabled = 1 [2025-09-23 16:45:41.940] [2025-09-23 16:45:41.940] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:45:43.119] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:45:50.914] SBL1:1210.0.1.0 [2025-09-23 16:45:50.946] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:45:52.528] SBL2:1210.0.1.0 [2025-09-23 16:45:52.560] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:45:52.672] j-A [2025-09-23 16:46:00.010] The R5 Autosar Classic is running [2025-09-23 16:46:00.035] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:46:00.035] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:46:00.642] INIT: version 2.96 booting [2025-09-23 16:46:00.754] INIT: Entering runlevel: 5 [2025-09-23 16:46:01.048] mtd24 attached [2025-09-23 16:46:01.048] mtd28 attached [2025-09-23 16:46:01.048] mtd32 attached [2025-09-23 16:46:01.048] ubi0:textures is mounted. [2025-09-23 16:46:01.048] RTNETLINK answers: File exists [2025-09-23 16:46:01.048] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:46:01.048] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:46:01.048] ubi1:animations is mounted. [2025-09-23 16:46:01.048] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:46:01.048] ubi2:dml_code is mounted. [2025-09-23 16:46:01.048] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:46:01.048] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:46:01.059] data.LB_FadeInType0=100 [2025-09-23 16:46:01.059] data.CHLH_FadeInType0=0 [2025-09-23 16:46:01.059] data.WU_FadeInDelay=0 [2025-09-23 16:46:01.059] max_time_out=0 [2025-09-23 16:46:01.059] No splash screen [2025-09-23 16:46:01.059] stop dss Done [2025-09-23 16:46:01.090] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:46:01.127] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:46:01.127] /dev/mem opened. [2025-09-23 16:46:01.127] Memory mapped at address 0xffffadd3f000. [2025-09-23 16:46:01.127] Read at address 0x00600018 (0xffffadd3f018): 0x00000000 [2025-09-23 16:46:01.127] Write at address 0x00600018 (0xffffadd3f018): 0x00400040, readback 0x00400040 [2025-09-23 16:46:01.255] Loaded PowerVR consumer services. [2025-09-23 16:46:01.367] Waiting data available... [2025-09-23 16:46:01.383] 512+0 records in [2025-09-23 16:46:01.383] 512+0 records out [2025-09-23 16:46:01.431] Starting syslogd/klogd: done [2025-09-23 16:46:01.447] DML Start [2025-09-23 16:46:01.607] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:46:01.831] DML res1: 0 [2025-09-23 16:46:02.307] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:46:02.307] Read Success [2025-09-23 16:46:02.307] Verifying certificate... [2025-09-23 16:46:02.594] Verified OK [2025-09-23 16:46:02.594] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:46:04.380] Verified OK [2025-09-23 16:46:04.380] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:46:04.908] Verified OK [2025-09-23 16:46:04.908] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:46:07.469] fs.protected_hardlinks = 1 [2025-09-23 16:46:07.469] fs.protected_symlinks = 1 [2025-09-23 16:46:07.469] kernel.modules_disabled = 1 [2025-09-23 16:46:07.658] [2025-09-23 16:46:07.658] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:46:08.955] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:46:16.680] SBL1:1210.0.1.0 [2025-09-23 16:46:16.712] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:46:18.294] SBL2:1210.0.1.0 [2025-09-23 16:46:18.331] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:46:18.439] j-A [2025-09-23 16:46:25.776] The R5 Autosar Classic is running [2025-09-23 16:46:25.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:46:25.807] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:46:26.414] INIT: version 2.96 booting [2025-09-23 16:46:26.526] INIT: Entering runlevel: 5 [2025-09-23 16:46:26.815] mtd32 attached [2025-09-23 16:46:26.815] mtd24 attached [2025-09-23 16:46:26.815] mtd28 attached [2025-09-23 16:46:26.815] RTNETLINK answers: File exists [2025-09-23 16:46:26.815] ubi2:animations is mounted. [2025-09-23 16:46:26.815] ubi1:textures is mounted. [2025-09-23 16:46:26.815] ubi0:dml_code is mounted. [2025-09-23 16:46:26.815] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:46:26.815] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:46:26.815] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:46:26.815] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:46:26.815] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:46:26.815] data.LB_FadeInType0=100 [2025-09-23 16:46:26.815] data.CHLH_FadeInType0=0 [2025-09-23 16:46:26.815] data.WU_FadeInDelay=0 [2025-09-23 16:46:26.815] max_time_out=0 [2025-09-23 16:46:26.815] No splash screen [2025-09-23 16:46:26.815] stop dss Done [2025-09-23 16:46:26.884] /dev/mem opened. [2025-09-23 16:46:26.884] Memory mapped at address 0xffffb0ad1000. [2025-09-23 16:46:26.884] Read at address 0x00600018 (0xffffb0ad1018): 0x00000000 [2025-09-23 16:46:26.884] Write at address 0x00600018 (0xffffb0ad1018): 0x00400040, readback 0x00400040 [2025-09-23 16:46:26.963] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:46:26.963] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:46:27.107] Loaded PowerVR consumer services. [2025-09-23 16:46:27.123] 512+0 records in [2025-09-23 16:46:27.123] 512+0 records out [2025-09-23 16:46:27.139] Waiting data available... [2025-09-23 16:46:27.171] Starting syslogd/klogd: done [2025-09-23 16:46:27.187] DML Start [2025-09-23 16:46:27.363] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:46:27.814] DML res1: 0 [2025-09-23 16:46:28.056] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:46:28.056] Read Success [2025-09-23 16:46:28.056] Verifying certificate... [2025-09-23 16:46:28.312] Verified OK [2025-09-23 16:46:28.328] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:46:30.055] Verified OK [2025-09-23 16:46:30.055] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:46:30.694] Verified OK [2025-09-23 16:46:30.694] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:46:33.316] fs.protected_hardlinks = 1 [2025-09-23 16:46:33.316] fs.protected_symlinks = 1 [2025-09-23 16:46:33.316] kernel.modules_disabled = 1 [2025-09-23 16:46:33.507] [2025-09-23 16:46:33.507] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:46:34.682] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:46:42.426] SBL1:1210.0.1.0 [2025-09-23 16:46:42.474] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:46:44.041] SBL2:1210.0.1.0 [2025-09-23 16:46:44.089] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:46:44.185] j-A [2025-09-23 16:46:51.538] The R5 Autosar Classic is running [2025-09-23 16:46:51.562] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:46:51.562] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:46:52.170] INIT: version 2.96 booting [2025-09-23 16:46:52.281] INIT: Entering runlevel: 5 [2025-09-23 16:46:52.426] mtd24 attached [2025-09-23 16:46:52.442] mtd28 attached [2025-09-23 16:46:52.458] mtd32 attached [2025-09-23 16:46:52.612] ubi0:textures is mounted. [2025-09-23 16:46:52.613] ubi1:animations is mounted. [2025-09-23 16:46:52.613] RTNETLINK answers: File exists [2025-09-23 16:46:52.613] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:46:52.613] ubi2:dml_code is mounted. [2025-09-23 16:46:52.613] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:46:52.613] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:46:52.613] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:46:52.613] data.LB_FadeInType0=100 [2025-09-23 16:46:52.613] data.CHLH_FadeInType0=0 [2025-09-23 16:46:52.613] data.WU_FadeInDelay=0 [2025-09-23 16:46:52.613] max_time_out=0 [2025-09-23 16:46:52.613] No splash screen [2025-09-23 16:46:52.613] stop dss Done [2025-09-23 16:46:52.613] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:46:52.613] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:46:52.634] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:46:52.634] /dev/mem opened. [2025-09-23 16:46:52.634] Memory mapped at address 0xffff8648d000. [2025-09-23 16:46:52.634] Read at address 0x00600018 (0xffff8648d018): 0x00000000 [2025-09-23 16:46:52.634] Write at address 0x00600018 (0xffff8648d018): 0x00400040, readback 0x00400040 [2025-09-23 16:46:52.825] Loaded PowerVR consumer services. [2025-09-23 16:46:52.858] 512+0 records in [2025-09-23 16:46:52.858] 512+0 records out [2025-09-23 16:46:52.874] Waiting data available... [2025-09-23 16:46:52.906] Starting syslogd/klogd: done [2025-09-23 16:46:52.922] DML Start [2025-09-23 16:46:53.129] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:46:53.612] DML res1: 0 [2025-09-23 16:46:53.773] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:46:53.773] Read Success [2025-09-23 16:46:53.773] Verifying certificate... [2025-09-23 16:46:53.997] Verified OK [2025-09-23 16:46:54.013] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:46:55.660] Verified OK [2025-09-23 16:46:55.694] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:46:56.281] Verified OK [2025-09-23 16:46:56.281] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:46:58.952] fs.protected_hardlinks = 1 [2025-09-23 16:46:58.952] fs.protected_symlinks = 1 [2025-09-23 16:46:58.968] kernel.modules_disabled = 1 [2025-09-23 16:46:59.159] [2025-09-23 16:46:59.159] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:47:00.444] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:47:08.173] SBL1:1210.0.1.0 [2025-09-23 16:47:08.221] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:47:09.787] SBL2:1210.0.1.0 [2025-09-23 16:47:09.819] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:47:09.932] j-A [2025-09-23 16:47:17.322] The R5 Autosar Classic is running [2025-09-23 16:47:17.322] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:47:17.322] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:47:17.912] INIT: version 2.96 booting [2025-09-23 16:47:18.007] INIT: Entering runlevel: 5 [2025-09-23 16:47:18.167] mtd24 attached [2025-09-23 16:47:18.167] mtd28 attached [2025-09-23 16:47:18.333] mtd32 attached [2025-09-23 16:47:18.333] ubi0:textures is mounted. [2025-09-23 16:47:18.333] ubi1:animations is mounted. [2025-09-23 16:47:18.333] RTNETLINK answers: File exists [2025-09-23 16:47:18.333] ubi2:dml_code is mounted. [2025-09-23 16:47:18.333] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:47:18.333] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:47:18.333] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:47:18.333] data.LB_FadeInType0=100 [2025-09-23 16:47:18.333] data.CHLH_FadeInType0=0 [2025-09-23 16:47:18.333] data.WU_FadeInDelay=0 [2025-09-23 16:47:18.333] max_time_out=0 [2025-09-23 16:47:18.333] No splash screen [2025-09-23 16:47:18.333] stop dss Done [2025-09-23 16:47:18.333] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:47:18.333] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:47:18.355] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:47:18.355] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:47:18.355] /dev/mem opened. [2025-09-23 16:47:18.381] Memory mapped at address 0xffff8a706000. [2025-09-23 16:47:18.381] Read at address 0x00600018 (0xffff8a706018): 0x00000000 [2025-09-23 16:47:18.381] Write at address 0x00600018 (0xffff8a706018): 0x00400040, readback 0x00400040 [2025-09-23 16:47:18.542] Loaded PowerVR consumer services. [2025-09-23 16:47:18.589] 512+0 records in [2025-09-23 16:47:18.589] 512+0 records out [2025-09-23 16:47:18.621] Waiting data available... [2025-09-23 16:47:18.621] Starting syslogd/klogd: done [2025-09-23 16:47:18.637] DML Start [2025-09-23 16:47:18.796] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:47:18.989] DML res1: 0 [2025-09-23 16:47:19.591] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:47:19.591] Read Success [2025-09-23 16:47:19.591] Verifying certificate... [2025-09-23 16:47:19.815] Verified OK [2025-09-23 16:47:19.831] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:47:21.585] Verified OK [2025-09-23 16:47:21.585] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:47:22.174] Verified OK [2025-09-23 16:47:22.174] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:47:24.764] fs.protected_hardlinks = 1 [2025-09-23 16:47:24.798] fs.protected_symlinks = 1 [2025-09-23 16:47:24.799] kernel.modules_disabled = 1 [2025-09-23 16:47:24.988] [2025-09-23 16:47:24.988] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:47:26.105] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:47:33.931] SBL1:1210.0.1.0 [2025-09-23 16:47:33.979] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:47:35.545] SBL2:1210.0.1.0 [2025-09-23 16:47:35.593] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:47:35.689] j-A [2025-09-23 16:47:43.042] The R5 Autosar Classic is running [2025-09-23 16:47:43.065] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:47:43.065] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:47:43.672] INIT: version 2.96 booting [2025-09-23 16:47:43.784] INIT: Entering runlevel: 5 [2025-09-23 16:47:43.928] mtd24 attached [2025-09-23 16:47:43.944] mtd28 attached [2025-09-23 16:47:43.960] mtd32 attached [2025-09-23 16:47:44.008] ubi0:textures is mounted. [2025-09-23 16:47:44.008] RTNETLINK answers: File exists [2025-09-23 16:47:44.114] ubi1:animations is mounted. [2025-09-23 16:47:44.114] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:47:44.114] ubi2:dml_code is mounted. [2025-09-23 16:47:44.114] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:47:44.114] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:47:44.114] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:47:44.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:47:44.115] data.LB_FadeInType0=100 [2025-09-23 16:47:44.115] data.CHLH_FadeInType0=0 [2025-09-23 16:47:44.115] data.WU_FadeInDelay=0 [2025-09-23 16:47:44.115] max_time_out=0 [2025-09-23 16:47:44.115] No splash screen [2025-09-23 16:47:44.115] stop dss Done [2025-09-23 16:47:44.115] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:47:44.115] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:47:44.123] /dev/mem opened. [2025-09-23 16:47:44.149] Memory mapped at address 0xffff9709a000. [2025-09-23 16:47:44.149] Read at address 0x00600018 (0xffff9709a018): 0x00000000 [2025-09-23 16:47:44.149] Write at address 0x00600018 (0xffff9709a018): 0x00400040, readback 0x00400040 [2025-09-23 16:47:44.229] Loaded PowerVR consumer services. [2025-09-23 16:47:44.356] 512+0 records in [2025-09-23 16:47:44.356] 512+0 records out [2025-09-23 16:47:44.372] Waiting data available... [2025-09-23 16:47:44.421] Starting syslogd/klogd: done [2025-09-23 16:47:44.436] DML Start [2025-09-23 16:47:44.612] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:47:44.820] DML res1: 0 [2025-09-23 16:47:45.347] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:47:45.369] Read Success [2025-09-23 16:47:45.369] Verifying certificate... [2025-09-23 16:47:45.592] Verified OK [2025-09-23 16:47:45.608] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:47:47.175] Verified OK [2025-09-23 16:47:47.175] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:47:47.870] Verified OK [2025-09-23 16:47:47.870] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:47:50.507] fs.protected_hardlinks = 1 [2025-09-23 16:47:50.507] fs.protected_symlinks = 1 [2025-09-23 16:47:50.523] kernel.modules_disabled = 1 [2025-09-23 16:47:50.715] [2025-09-23 16:47:50.715] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:47:51.955] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:47:59.695] SBL1:1210.0.1.0 [2025-09-23 16:47:59.743] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:48:01.310] SBL2:1210.0.1.0 [2025-09-23 16:48:01.551] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:48:01.551] j-A [2025-09-23 16:48:08.807] The R5 Autosar Classic is running [2025-09-23 16:48:08.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:48:08.828] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:48:09.436] INIT: version 2.96 booting [2025-09-23 16:48:09.849] INIT: Entering runlevel: 5 [2025-09-23 16:48:09.849] mtd24 attached [2025-09-23 16:48:09.849] mtd32 attached [2025-09-23 16:48:09.849] mtd28 attached [2025-09-23 16:48:09.849] ubi0:textures is mounted. [2025-09-23 16:48:09.849] RTNETLINK answers: File exists [2025-09-23 16:48:09.849] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:48:09.849] ubi1:dml_code is mounted. [2025-09-23 16:48:09.849] ubi2:animations is mounted. [2025-09-23 16:48:09.849] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:48:09.849] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:48:09.849] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:48:09.849] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:48:09.849] data.LB_FadeInType0=100 [2025-09-23 16:48:09.849] data.CHLH_FadeInType0=0 [2025-09-23 16:48:09.849] data.WU_FadeInDelay=0 [2025-09-23 16:48:09.849] max_time_out=0 [2025-09-23 16:48:09.849] No splash screen [2025-09-23 16:48:09.849] stop dss Done [2025-09-23 16:48:09.880] /dev/mem opened. [2025-09-23 16:48:09.912] Memory mapped at address 0xffff95064000. [2025-09-23 16:48:09.912] Read at address 0x00600018 (0xffff95064018): 0x00000000 [2025-09-23 16:48:09.912] Write at address 0x00600018 (0xffff95064018): 0x00400040, readback 0x00400040 [2025-09-23 16:48:09.912] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:48:09.928] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:48:10.008] Loaded PowerVR consumer services. [2025-09-23 16:48:10.120] 512+0 records in [2025-09-23 16:48:10.120] 512+0 records out [2025-09-23 16:48:10.151] Waiting data available... [2025-09-23 16:48:10.151] Starting syslogd/klogd: done [2025-09-23 16:48:10.183] DML Start [2025-09-23 16:48:10.360] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:48:10.599] DML res1: 0 [2025-09-23 16:48:11.071] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:48:11.071] Read Success [2025-09-23 16:48:11.071] Verifying certificate... [2025-09-23 16:48:11.311] Verified OK [2025-09-23 16:48:11.379] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:48:13.126] Verified OK [2025-09-23 16:48:13.126] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:48:13.682] Verified OK [2025-09-23 16:48:13.682] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:48:16.112] fs.protected_hardlinks = 1 [2025-09-23 16:48:16.112] fs.protected_symlinks = 1 [2025-09-23 16:48:16.128] kernel.modules_disabled = 1 [2025-09-23 16:48:16.320] [2025-09-23 16:48:16.320] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:48:17.678] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:48:25.466] SBL1:1210.0.1.0 [2025-09-23 16:48:25.514] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:48:27.081] SBL2:1210.0.1.0 [2025-09-23 16:48:27.116] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:48:27.224] j-A [2025-09-23 16:48:34.597] The R5 Autosar Classic is running [2025-09-23 16:48:34.597] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:48:34.597] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:48:35.205] INIT: version 2.96 booting [2025-09-23 16:48:35.317] INIT: Entering runlevel: 5 [2025-09-23 16:48:35.646] mtd32 attached [2025-09-23 16:48:35.646] mtd28 attached [2025-09-23 16:48:35.646] mtd24 attached [2025-09-23 16:48:35.646] ubi0:dml_code is mounted. [2025-09-23 16:48:35.646] RTNETLINK answers: File exists [2025-09-23 16:48:35.646] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:48:35.646] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:48:35.646] ubi1:animations is mounted. [2025-09-23 16:48:35.646] ubi2:textures is mounted. [2025-09-23 16:48:35.646] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:48:35.646] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:48:35.646] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:48:35.646] data.LB_FadeInType0=100 [2025-09-23 16:48:35.646] data.CHLH_FadeInType0=0 [2025-09-23 16:48:35.646] data.WU_FadeInDelay=0 [2025-09-23 16:48:35.646] max_time_out=0 [2025-09-23 16:48:35.646] No splash screen [2025-09-23 16:48:35.646] stop dss Done [2025-09-23 16:48:35.687] /dev/mem opened. [2025-09-23 16:48:35.687] Memory mapped at address 0xffffb0317000. [2025-09-23 16:48:35.687] Read at address 0x00600018 (0xffffb0317018): 0x00000000 [2025-09-23 16:48:35.687] Write at address 0x00600018 (0xffffb0317018): 0x00400040, readback 0x00400040 [2025-09-23 16:48:35.687] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:48:35.687] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:48:35.751] Loaded PowerVR consumer services. [2025-09-23 16:48:35.895] 512+0 records in [2025-09-23 16:48:35.895] 512+0 records out [2025-09-23 16:48:35.911] Waiting data available... [2025-09-23 16:48:35.943] Starting syslogd/klogd: done [2025-09-23 16:48:35.959] DML Start [2025-09-23 16:48:36.135] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:48:36.374] DML res1: 0 [2025-09-23 16:48:36.811] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:48:36.811] Read Success [2025-09-23 16:48:36.811] Verifying certificate... [2025-09-23 16:48:37.066] Verified OK [2025-09-23 16:48:37.082] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:48:38.761] Verified OK [2025-09-23 16:48:38.761] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:48:39.392] Verified OK [2025-09-23 16:48:39.392] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:48:42.029] fs.protected_hardlinks = 1 [2025-09-23 16:48:42.045] fs.protected_symlinks = 1 [2025-09-23 16:48:42.045] kernel.modules_disabled = 1 [2025-09-23 16:48:42.253] [2025-09-23 16:48:42.253] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:48:43.492] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:48:51.216] SBL1:1210.0.1.0 [2025-09-23 16:48:51.264] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:48:52.830] SBL2:1210.0.1.0 [2025-09-23 16:48:52.867] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:48:52.974] j-A [2025-09-23 16:49:00.329] The R5 Autosar Classic is running [2025-09-23 16:49:00.329] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:49:00.350] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:49:00.957] INIT: version 2.96 booting [2025-09-23 16:49:01.193] INIT: Entering runlevel: 5 [2025-09-23 16:49:01.212] mtd28 attached [2025-09-23 16:49:01.228] mtd24 attached [2025-09-23 16:49:01.244] mtd32 attached [2025-09-23 16:49:01.260] ubi0:animations is mounted. [2025-09-23 16:49:01.293] RTNETLINK answers: File exists [2025-09-23 16:49:01.345] ubi2:dml_code is mounted. [2025-09-23 16:49:01.345] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:49:01.345] ubi1:textures is mounted. [2025-09-23 16:49:01.345] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:49:01.345] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:49:01.345] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:49:01.345] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:49:01.345] data.LB_FadeInType0=100 [2025-09-23 16:49:01.345] data.CHLH_FadeInType0=0 [2025-09-23 16:49:01.345] data.WU_FadeInDelay=0 [2025-09-23 16:49:01.345] max_time_out=0 [2025-09-23 16:49:01.345] No splash screen [2025-09-23 16:49:01.345] stop dss Done [2025-09-23 16:49:01.419] /dev/mem opened. [2025-09-23 16:49:01.419] Memory mapped at address 0xffffb86f0000. [2025-09-23 16:49:01.419] Read at address 0x00600018 (0xffffb86f0018): 0x00000000 [2025-09-23 16:49:01.419] Write at address 0x00600018 (0xffffb86f0018): 0x00400040, readback 0x00400040 [2025-09-23 16:49:01.419] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:49:01.419] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:49:01.514] Loaded PowerVR consumer services. [2025-09-23 16:49:01.665] Waiting data available... [2025-09-23 16:49:01.665] 512+0 records in [2025-09-23 16:49:01.665] 512+0 records out [2025-09-23 16:49:01.697] Starting syslogd/klogd: done [2025-09-23 16:49:01.713] DML Start [2025-09-23 16:49:01.873] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:49:02.145] DML res1: 0 [2025-09-23 16:49:02.554] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:49:02.554] Read Success [2025-09-23 16:49:02.554] Verifying certificate... [2025-09-23 16:49:02.778] Verified OK [2025-09-23 16:49:02.793] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:49:04.366] Verified OK [2025-09-23 16:49:04.366] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:49:04.979] Verified OK [2025-09-23 16:49:04.979] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:49:07.696] fs.protected_hardlinks = 1 [2025-09-23 16:49:07.712] fs.protected_symlinks = 1 [2025-09-23 16:49:07.712] kernel.modules_disabled = 1 [2025-09-23 16:49:07.904] [2025-09-23 16:49:07.904] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:49:09.243] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:49:16.973] SBL1:1210.0.1.0 [2025-09-23 16:49:17.021] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:49:18.587] SBL2:1210.0.1.0 [2025-09-23 16:49:18.619] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:49:18.732] j-A [2025-09-23 16:49:26.106] The R5 Autosar Classic is running [2025-09-23 16:49:26.106] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:49:26.106] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:49:26.713] INIT: version 2.96 booting [2025-09-23 16:49:26.824] INIT: Entering runlevel: 5 [2025-09-23 16:49:27.149] mtd28 attached [2025-09-23 16:49:27.149] mtd32 attached [2025-09-23 16:49:27.149] mtd24 attached [2025-09-23 16:49:27.149] ubi0:animations is mounted. [2025-09-23 16:49:27.149] ubi1:dml_code is mounted. [2025-09-23 16:49:27.149] RTNETLINK answers: File exists [2025-09-23 16:49:27.149] ubi2:textures is mounted. [2025-09-23 16:49:27.149] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:49:27.149] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:49:27.149] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:49:27.149] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:49:27.149] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:49:27.149] data.LB_FadeInType0=100 [2025-09-23 16:49:27.149] data.CHLH_FadeInType0=0 [2025-09-23 16:49:27.149] data.WU_FadeInDelay=0 [2025-09-23 16:49:27.149] max_time_out=0 [2025-09-23 16:49:27.149] No splash screen [2025-09-23 16:49:27.149] stop dss Done [2025-09-23 16:49:27.153] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:49:27.191] /dev/mem opened. [2025-09-23 16:49:27.191] Memory mapped at address 0xffff95f56000. [2025-09-23 16:49:27.191] Read at address 0x00600018 (0xffff95f56018): 0x00000000 [2025-09-23 16:49:27.191] Write at address 0x00600018 (0xffff95f56018): 0x00400040, readback 0x00400040 [2025-09-23 16:49:27.191] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:49:27.383] Loaded PowerVR consumer services. [2025-09-23 16:49:27.431] 512+0 records in [2025-09-23 16:49:27.431] 512+0 records out [2025-09-23 16:49:27.447] Waiting data available... [2025-09-23 16:49:27.479] Starting syslogd/klogd: done [2025-09-23 16:49:27.495] DML Start [2025-09-23 16:49:27.686] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:49:28.163] DML res1: 0 [2025-09-23 16:49:28.388] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:49:28.388] Read Success [2025-09-23 16:49:28.388] Verifying certificate... [2025-09-23 16:49:28.611] Verified OK [2025-09-23 16:49:28.627] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:49:30.369] Verified OK [2025-09-23 16:49:30.369] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:49:30.945] Verified OK [2025-09-23 16:49:30.945] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:49:33.455] fs.protected_hardlinks = 1 [2025-09-23 16:49:33.455] fs.protected_symlinks = 1 [2025-09-23 16:49:33.471] kernel.modules_disabled = 1 [2025-09-23 16:49:33.662] [2025-09-23 16:49:33.662] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:49:34.976] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:49:42.739] SBL1:1210.0.1.0 [2025-09-23 16:49:42.787] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:49:44.354] SBL2:1210.0.1.0 [2025-09-23 16:49:44.400] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:49:44.498] j-A [2025-09-23 16:49:51.871] The R5 Autosar Classic is running [2025-09-23 16:49:51.871] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:49:51.871] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:49:52.480] INIT: version 2.96 booting [2025-09-23 16:49:52.591] INIT: Entering runlevel: 5 [2025-09-23 16:49:52.915] mtd28 attached [2025-09-23 16:49:52.915] mtd32 attached [2025-09-23 16:49:52.915] mtd24 attached [2025-09-23 16:49:52.915] ubi0:animations is mounted. [2025-09-23 16:49:52.915] RTNETLINK answers: File exists [2025-09-23 16:49:52.915] ubi1:dml_code is mounted. [2025-09-23 16:49:52.915] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:49:52.915] ubi2:textures is mounted. [2025-09-23 16:49:52.915] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:49:52.915] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:49:52.915] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:49:52.915] data.LB_FadeInType0=100 [2025-09-23 16:49:52.915] data.CHLH_FadeInType0=0 [2025-09-23 16:49:52.915] data.WU_FadeInDelay=0 [2025-09-23 16:49:52.915] max_time_out=0 [2025-09-23 16:49:52.915] No splash screen [2025-09-23 16:49:52.915] stop dss Done [2025-09-23 16:49:52.915] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:49:52.949] /dev/mem opened. [2025-09-23 16:49:52.949] Memory mapped at address 0xffff84bab000. [2025-09-23 16:49:52.949] Read at address 0x00600018 (0xffff84bab018): 0x00000000 [2025-09-23 16:49:52.949] Write at address 0x00600018 (0xffff84bab018): 0x00400040, readback 0x00400040 [2025-09-23 16:49:52.949] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:49:52.965] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:49:53.157] Loaded PowerVR consumer services. [2025-09-23 16:49:53.189] 512+0 records in [2025-09-23 16:49:53.189] 512+0 records out [2025-09-23 16:49:53.205] Starting syslogd/klogd: Waiting data available... [2025-09-23 16:49:53.236] done [2025-09-23 16:49:53.252] DML Start [2025-09-23 16:49:53.445] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:49:53.913] DML res1: 0 [2025-09-23 16:49:54.137] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:49:54.137] Read Success [2025-09-23 16:49:54.137] Verifying certificate... [2025-09-23 16:49:54.441] Verified OK [2025-09-23 16:49:54.473] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:49:56.147] Verified OK [2025-09-23 16:49:56.147] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:49:56.738] Verified OK [2025-09-23 16:49:56.738] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:49:59.358] fs.protected_hardlinks = 1 [2025-09-23 16:49:59.358] fs.protected_symlinks = 1 [2025-09-23 16:49:59.358] kernel.modules_disabled = 1 [2025-09-23 16:49:59.533] [2025-09-23 16:49:59.533] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:50:00.928] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:50:08.495] SBL1:1210.0.1.0 [2025-09-23 16:50:08.543] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:50:10.110] SBL2:1210.0.1.0 [2025-09-23 16:50:10.158] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:50:10.254] j-A [2025-09-23 16:50:17.609] The R5 Autosar Classic is running [2025-09-23 16:50:17.609] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:50:17.630] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:50:18.238] INIT: version 2.96 booting [2025-09-23 16:50:18.349] INIT: Entering runlevel: 5 [2025-09-23 16:50:18.509] mtd28 attached [2025-09-23 16:50:18.509] mtd24 attached [2025-09-23 16:50:18.525] mtd32 attached [2025-09-23 16:50:18.541] ubi0:animations is mounted. [2025-09-23 16:50:18.678] RTNETLINK answers: File exists [2025-09-23 16:50:18.678] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:50:18.678] ubi1:textures is mounted. [2025-09-23 16:50:18.678] ubi2:dml_code is mounted. [2025-09-23 16:50:18.678] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:50:18.678] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:50:18.678] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:50:18.678] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:50:18.678] data.LB_FadeInType0=100 [2025-09-23 16:50:18.678] data.CHLH_FadeInType0=0 [2025-09-23 16:50:18.678] data.WU_FadeInDelay=0 [2025-09-23 16:50:18.678] max_time_out=0 [2025-09-23 16:50:18.678] No splash screen [2025-09-23 16:50:18.678] stop dss Done [2025-09-23 16:50:18.678] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:50:18.710] /dev/mem opened. [2025-09-23 16:50:18.710] Memory mapped at address 0xffff90ea3000. [2025-09-23 16:50:18.710] Read at address 0x00600018 (0xffff90ea3018): 0x00000000 [2025-09-23 16:50:18.710] Write at address 0x00600018 (0xffff90ea3018): 0x00400040, readback 0x00400040 [2025-09-23 16:50:18.710] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:50:18.918] Loaded PowerVR consumer services. [2025-09-23 16:50:18.950] 512+0 records in [2025-09-23 16:50:18.950] 512+0 records out [2025-09-23 16:50:18.966] Waiting data available... [2025-09-23 16:50:18.998] Starting syslogd/klogd: done [2025-09-23 16:50:19.014] DML Start [2025-09-23 16:50:19.190] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:50:19.397] DML res1: 0 [2025-09-23 16:50:19.813] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:50:19.834] Read Success [2025-09-23 16:50:19.834] Verifying certificate... [2025-09-23 16:50:20.074] Verified OK [2025-09-23 16:50:20.089] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:50:21.785] Verified OK [2025-09-23 16:50:21.785] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:50:22.307] Verified OK [2025-09-23 16:50:22.307] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:50:25.071] fs.protected_hardlinks = 1 [2025-09-23 16:50:25.119] fs.protected_symlinks = 1 [2025-09-23 16:50:25.119] kernel.modules_disabled = 1 [2025-09-23 16:50:25.276] [2025-09-23 16:50:25.276] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:50:26.515] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:50:34.247] SBL1:1210.0.1.0 [2025-09-23 16:50:34.279] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:50:35.861] SBL2:1210.0.1.0 [2025-09-23 16:50:35.893] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:50:36.005] j-A [2025-09-23 16:50:43.361] The R5 Autosar Classic is running [2025-09-23 16:50:43.368] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:50:43.368] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:50:43.976] INIT: version 2.96 booting [2025-09-23 16:50:44.088] INIT: Entering runlevel: 5 [2025-09-23 16:50:44.248] mtd28 attached [2025-09-23 16:50:44.248] mtd32 attached [2025-09-23 16:50:44.369] mtd24 attached [2025-09-23 16:50:44.370] ubi0:animations is mounted. [2025-09-23 16:50:44.370] RTNETLINK answers: File exists [2025-09-23 16:50:44.370] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:50:44.370] ubi2:textures is mounted. [2025-09-23 16:50:44.370] ubi1:dml_code is mounted. [2025-09-23 16:50:44.370] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:50:44.370] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:50:44.370] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:50:44.370] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:50:44.370] data.LB_FadeInType0=100 [2025-09-23 16:50:44.370] data.CHLH_FadeInType0=0 [2025-09-23 16:50:44.370] data.WU_FadeInDelay=0 [2025-09-23 16:50:44.370] max_time_out=0 [2025-09-23 16:50:44.370] No splash screen [2025-09-23 16:50:44.370] stop dss Done [2025-09-23 16:50:44.448] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:50:44.448] /dev/mem opened. [2025-09-23 16:50:44.448] Memory mapped at address 0xffff95447000. [2025-09-23 16:50:44.448] Read at address 0x00600018 (0xffff95447018): 0x00000000 [2025-09-23 16:50:44.448] Write at address 0x00600018 (0xffff95447018): 0x00400040, readback 0x00400040 [2025-09-23 16:50:44.448] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:50:44.640] Loaded PowerVR consumer services. [2025-09-23 16:50:44.672] 512+0 records in [2025-09-23 16:50:44.672] 512+0 records out [2025-09-23 16:50:44.704] Waiting data available... [2025-09-23 16:50:44.721] Starting syslogd/klogd: done [2025-09-23 16:50:44.737] DML Start [2025-09-23 16:50:44.912] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:50:45.383] DML res1: 0 [2025-09-23 16:50:45.552] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:50:45.573] Read Success [2025-09-23 16:50:45.573] Verifying certificate... [2025-09-23 16:50:45.797] Verified OK [2025-09-23 16:50:45.813] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:50:47.341] Verified OK [2025-09-23 16:50:47.341] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:50:47.971] Verified OK [2025-09-23 16:50:47.971] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:50:50.785] fs.protected_hardlinks = 1 [2025-09-23 16:50:50.801] fs.protected_symlinks = 1 [2025-09-23 16:50:50.801] kernel.modules_disabled = 1 [2025-09-23 16:50:51.008] [2025-09-23 16:50:51.008] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:50:52.230] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:50:59.981] SBL1:1210.0.1.0 [2025-09-23 16:51:00.029] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:51:01.596] SBL2:1210.0.1.0 [2025-09-23 16:51:01.644] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:51:01.740] j-A [2025-09-23 16:51:09.095] The R5 Autosar Classic is running [2025-09-23 16:51:09.118] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:51:09.118] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:51:09.724] INIT: version 2.96 booting [2025-09-23 16:51:10.134] INIT: Entering runlevel: 5 [2025-09-23 16:51:10.134] mtd28 attached [2025-09-23 16:51:10.134] mtd24 attached [2025-09-23 16:51:10.134] mtd32 attached [2025-09-23 16:51:10.134] ubi0:animations is mounted. [2025-09-23 16:51:10.134] ubi1:textures is mounted. [2025-09-23 16:51:10.134] RTNETLINK answers: File exists [2025-09-23 16:51:10.134] ubi2:dml_code is mounted. [2025-09-23 16:51:10.134] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:51:10.134] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:51:10.134] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:51:10.134] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:51:10.134] data.LB_FadeInType0=100 [2025-09-23 16:51:10.134] data.CHLH_FadeInType0=0 [2025-09-23 16:51:10.134] data.WU_FadeInDelay=0 [2025-09-23 16:51:10.134] max_time_out=0 [2025-09-23 16:51:10.134] No splash screen [2025-09-23 16:51:10.134] stop dss Done [2025-09-23 16:51:10.134] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:51:10.202] /dev/mem opened. [2025-09-23 16:51:10.202] Memory mapped at address 0xffffb2771000. [2025-09-23 16:51:10.202] Read at address 0x00600018 (0xffffb2771018): 0x00000000 [2025-09-23 16:51:10.202] Write at address 0x00600018 (0xffffb2771018): 0x00400040, readback 0x00400040 [2025-09-23 16:51:10.226] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:51:10.226] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:51:10.323] Loaded PowerVR consumer services. [2025-09-23 16:51:10.434] 512+0 records in [2025-09-23 16:51:10.434] 512+0 records out [2025-09-23 16:51:10.466] Starting syslogd/klogd: Waiting data available... [2025-09-23 16:51:10.482] done [2025-09-23 16:51:10.482] DML Start [2025-09-23 16:51:10.674] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:51:11.134] DML res1: 0 [2025-09-23 16:51:11.311] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:51:11.311] Read Success [2025-09-23 16:51:11.311] Verifying certificate... [2025-09-23 16:51:11.567] Verified OK [2025-09-23 16:51:11.567] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:51:13.295] Verified OK [2025-09-23 16:51:13.328] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:51:13.902] Verified OK [2025-09-23 16:51:13.902] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:51:16.492] fs.protected_hardlinks = 1 [2025-09-23 16:51:16.492] fs.protected_symlinks = 1 [2025-09-23 16:51:16.526] kernel.modules_disabled = 1 [2025-09-23 16:51:16.700] [2025-09-23 16:51:16.700] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:51:17.989] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:51:25.736] SBL1:1210.0.1.0 [2025-09-23 16:51:25.784] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:51:27.351] SBL2:1210.0.1.0 [2025-09-23 16:51:27.399] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:51:27.494] j-A [2025-09-23 16:51:34.848] The R5 Autosar Classic is running [2025-09-23 16:51:34.873] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:51:34.873] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:51:35.481] INIT: version 2.96 booting [2025-09-23 16:51:35.592] INIT: Entering runlevel: 5 [2025-09-23 16:51:35.752] mtd24 attached [2025-09-23 16:51:35.752] mtd28 attached [2025-09-23 16:51:35.768] mtd32 attached [2025-09-23 16:51:35.816] ubi0:textures is mounted. [2025-09-23 16:51:35.875] RTNETLINK answers: File exists [2025-09-23 16:51:35.875] ubi1:animations is mounted. [2025-09-23 16:51:35.875] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:51:35.875] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:51:35.875] ubi2:dml_code is mounted. [2025-09-23 16:51:35.875] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:51:35.875] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:51:35.875] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:51:35.875] data.LB_FadeInType0=100 [2025-09-23 16:51:35.889] data.CHLH_FadeInType0=0 [2025-09-23 16:51:35.889] data.WU_FadeInDelay=0 [2025-09-23 16:51:35.889] max_time_out=0 [2025-09-23 16:51:35.889] No splash screen [2025-09-23 16:51:35.889] stop dss Done [2025-09-23 16:51:35.968] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:51:35.968] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:51:35.968] /dev/mem opened. [2025-09-23 16:51:35.968] Memory mapped at address 0xffff93067000. [2025-09-23 16:51:35.968] Read at address 0x00600018 (0xffff93067018): 0x00000000 [2025-09-23 16:51:35.968] Write at address 0x00600018 (0xffff93067018): 0x00400040, readback 0x00400040 [2025-09-23 16:51:36.160] Loaded PowerVR consumer services. [2025-09-23 16:51:36.224] 512+0 records in [2025-09-23 16:51:36.224] 512+0 records out [2025-09-23 16:51:36.240] Waiting data available... [2025-09-23 16:51:36.272] Starting syslogd/klogd: done [2025-09-23 16:51:36.288] DML Start [2025-09-23 16:51:36.465] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:51:36.672] DML res1: 0 [2025-09-23 16:51:37.120] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:51:37.136] Read Success [2025-09-23 16:51:37.136] Verifying certificate... [2025-09-23 16:51:37.360] Verified OK [2025-09-23 16:51:37.376] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:51:39.001] Verified OK [2025-09-23 16:51:39.001] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:51:39.603] Verified OK [2025-09-23 16:51:39.603] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:51:42.209] fs.protected_hardlinks = 1 [2025-09-23 16:51:42.225] fs.protected_symlinks = 1 [2025-09-23 16:51:42.225] kernel.modules_disabled = 1 [2025-09-23 16:51:42.401] [2025-09-23 16:51:42.401] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:51:43.792] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:51:51.477] SBL1:1210.0.1.0 [2025-09-23 16:51:51.525] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:51:53.092] SBL2:1210.0.1.0 [2025-09-23 16:51:53.140] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:51:53.236] j-A [2025-09-23 16:52:00.590] The R5 Autosar Classic is running [2025-09-23 16:52:00.590] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:52:00.611] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:52:01.218] INIT: version 2.96 booting [2025-09-23 16:52:01.330] INIT: Entering runlevel: 5 [2025-09-23 16:52:01.490] mtd24 attached [2025-09-23 16:52:01.506] mtd28 attached [2025-09-23 16:52:01.522] mtd32 attached [2025-09-23 16:52:01.538] ubi0:textures is mounted. [2025-09-23 16:52:01.554] ubi1:animations is mounted. [2025-09-23 16:52:01.570] RTNETLINK answers: File exists [2025-09-23 16:52:01.570] ubi2:dml_code is mounted. [2025-09-23 16:52:01.620] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:52:01.620] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:52:01.620] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:52:01.620] data.LB_FadeInType0=100 [2025-09-23 16:52:01.620] data.CHLH_FadeInType0=0 [2025-09-23 16:52:01.620] data.WU_FadeInDelay=0 [2025-09-23 16:52:01.620] max_time_out=0 [2025-09-23 16:52:01.620] No splash screen [2025-09-23 16:52:01.620] stop dss Done [2025-09-23 16:52:01.620] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:52:01.620] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:52:01.693] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:52:01.693] /dev/mem opened. [2025-09-23 16:52:01.693] Memory mapped at address 0xffffa2b2e000. [2025-09-23 16:52:01.693] Read at address 0x00600018 (0xffffa2b2e018): 0x00000000 [2025-09-23 16:52:01.693] Write at address 0x00600018 (0xffffa2b2e018): 0x00400040, readback 0x00400040 [2025-09-23 16:52:01.693] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:52:01.885] Loaded PowerVR consumer services. [2025-09-23 16:52:01.917] 512+0 records in [2025-09-23 16:52:01.917] 512+0 records out [2025-09-23 16:52:01.949] Starting syslogd/klogd: done [2025-09-23 16:52:01.997] Waiting data available... [2025-09-23 16:52:01.997] DML Start [2025-09-23 16:52:02.205] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:52:02.429] DML res1: 0 [2025-09-23 16:52:02.794] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:52:02.794] Read Success [2025-09-23 16:52:02.794] Verifying certificate... [2025-09-23 16:52:03.034] Verified OK [2025-09-23 16:52:03.050] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:52:04.771] Verified OK [2025-09-23 16:52:04.771] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:52:05.415] Verified OK [2025-09-23 16:52:05.415] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:52:08.006] fs.protected_hardlinks = 1 [2025-09-23 16:52:08.006] fs.protected_symlinks = 1 [2025-09-23 16:52:08.022] kernel.modules_disabled = 1 [2025-09-23 16:52:08.230] [2025-09-23 16:52:08.230] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:52:09.489] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:52:17.227] SBL1:1210.0.1.0 [2025-09-23 16:52:17.259] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:52:18.842] SBL2:1210.0.1.0 [2025-09-23 16:52:18.874] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:52:18.986] j-A [2025-09-23 16:52:26.356] The R5 Autosar Classic is running [2025-09-23 16:52:26.356] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:52:26.356] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:52:26.963] INIT: version 2.96 booting [2025-09-23 16:52:27.058] INIT: Entering runlevel: 5 [2025-09-23 16:52:27.219] mtd32 attached [2025-09-23 16:52:27.235] mtd24 attached [2025-09-23 16:52:27.235] mtd28 attached [2025-09-23 16:52:27.298] ubi0:dml_code is mounted. [2025-09-23 16:52:27.298] RTNETLINK answers: File exists [2025-09-23 16:52:27.355] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:52:27.355] ubi1:textures is mounted. [2025-09-23 16:52:27.355] ubi2:animations is mounted. [2025-09-23 16:52:27.355] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:52:27.355] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:52:27.355] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:52:27.355] data.LB_FadeInType0=100 [2025-09-23 16:52:27.355] data.CHLH_FadeInType0=0 [2025-09-23 16:52:27.355] data.WU_FadeInDelay=0 [2025-09-23 16:52:27.355] max_time_out=0 [2025-09-23 16:52:27.355] No splash screen [2025-09-23 16:52:27.355] stop dss Done [2025-09-23 16:52:27.355] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:52:27.429] /dev/mem opened. [2025-09-23 16:52:27.429] Memory mapped at address 0xffff94e64000. [2025-09-23 16:52:27.429] Read at address 0x00600018 (0xffff94e64018): 0x00000000 [2025-09-23 16:52:27.429] Write at address 0x00600018 (0xffff94e64018): 0x00400040, readback 0x00400040 [2025-09-23 16:52:27.478] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:52:27.510] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:52:27.637] Loaded PowerVR consumer services. [2025-09-23 16:52:27.669] 512+0 records in [2025-09-23 16:52:27.669] 512+0 records out [2025-09-23 16:52:27.685] Starting syslogd/klogd: done [2025-09-23 16:52:27.717] Waiting data available... [2025-09-23 16:52:27.717] DML Start [2025-09-23 16:52:27.893] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:52:28.133] DML res1: 0 [2025-09-23 16:52:28.469] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:52:28.469] Read Success [2025-09-23 16:52:28.485] Verifying certificate... [2025-09-23 16:52:28.756] Verified OK [2025-09-23 16:52:28.789] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:52:30.462] Verified OK [2025-09-23 16:52:30.462] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:52:31.123] Verified OK [2025-09-23 16:52:31.123] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:52:33.713] fs.protected_hardlinks = 1 [2025-09-23 16:52:33.728] fs.protected_symlinks = 1 [2025-09-23 16:52:33.728] kernel.modules_disabled = 1 [2025-09-23 16:52:33.921] [2025-09-23 16:52:33.921] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:52:35.210] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:52:42.971] SBL1:1210.0.1.0 [2025-09-23 16:52:43.019] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:52:44.586] SBL2:1210.0.1.0 [2025-09-23 16:52:44.634] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 16:52:44.729] j-A [2025-09-23 16:52:52.083] The R5 Autosar Classic is running [2025-09-23 16:52:52.106] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:52:52.106] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:52:52.713] INIT: version 2.96 booting [2025-09-23 16:52:53.138] INIT: Entering runlevel: 5 [2025-09-23 16:52:53.138] mtd24 attached [2025-09-23 16:52:53.138] mtd28 attached [2025-09-23 16:52:53.138] mtd32 attached [2025-09-23 16:52:53.138] ubi0:textures is mounted. [2025-09-23 16:52:53.138] RTNETLINK answers: File exists [2025-09-23 16:52:53.138] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:52:53.138] ubi2:dml_code is mounted. [2025-09-23 16:52:53.138] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:52:53.138] ubi1:animations is mounted. [2025-09-23 16:52:53.138] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:52:53.138] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:52:53.138] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:52:53.138] data.LB_FadeInType0=100 [2025-09-23 16:52:53.138] data.CHLH_FadeInType0=0 [2025-09-23 16:52:53.138] data.WU_FadeInDelay=0 [2025-09-23 16:52:53.138] max_time_out=0 [2025-09-23 16:52:53.138] No splash screen [2025-09-23 16:52:53.138] stop dss Done [2025-09-23 16:52:53.191] /dev/mem opened. [2025-09-23 16:52:53.191] Memory mapped at address 0xffff82e65000. [2025-09-23 16:52:53.191] Read at address 0x00600018 (0xffff82e65018): 0x00000000 [2025-09-23 16:52:53.191] Write at address 0x00600018 (0xffff82e65018): 0x00400040, readback 0x00400040 [2025-09-23 16:52:53.191] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:52:53.191] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:52:53.304] Loaded PowerVR consumer services. [2025-09-23 16:52:53.415] 512+0 records in [2025-09-23 16:52:53.415] 512+0 records out [2025-09-23 16:52:53.431] Waiting data available... [2025-09-23 16:52:53.463] Starting syslogd/klogd: done [2025-09-23 16:52:53.479] DML Start [2025-09-23 16:52:53.655] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:52:54.137] DML res1: 0 [2025-09-23 16:52:54.284] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:52:54.284] Read Success [2025-09-23 16:52:54.284] Verifying certificate... [2025-09-23 16:52:54.524] Verified OK [2025-09-23 16:52:54.540] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:52:56.179] Verified OK [2025-09-23 16:52:56.179] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:52:56.847] Verified OK [2025-09-23 16:52:56.847] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:52:59.579] fs.protected_hardlinks = 1 [2025-09-23 16:52:59.595] fs.protected_symlinks = 1 [2025-09-23 16:52:59.595] kernel.modules_disabled = 1 [2025-09-23 16:52:59.788] [2025-09-23 16:52:59.788] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:53:01.012] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:53:08.739] SBL1:1210.0.1.0 [2025-09-23 16:53:08.787] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:53:10.353] SBL2:1210.0.1.0 [2025-09-23 16:53:10.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:53:10.496] j-A [2025-09-23 16:53:17.871] The R5 Autosar Classic is running [2025-09-23 16:53:17.871] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:53:17.871] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:53:18.478] INIT: version 2.96 booting [2025-09-23 16:53:18.590] INIT: Entering runlevel: 5 [2025-09-23 16:53:18.920] mtd32 attached [2025-09-23 16:53:18.920] mtd28 attached [2025-09-23 16:53:18.920] mtd24 attached [2025-09-23 16:53:18.920] RTNETLINK answers: File exists [2025-09-23 16:53:18.920] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:53:18.920] ubi0:dml_code is mounted. [2025-09-23 16:53:18.920] ubi2:textures is mounted. [2025-09-23 16:53:18.920] ubi1:animations is mounted. [2025-09-23 16:53:18.920] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:53:18.920] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:53:18.920] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:53:18.920] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:53:18.920] data.LB_FadeInType0=100 [2025-09-23 16:53:18.920] data.CHLH_FadeInType0=0 [2025-09-23 16:53:18.920] data.WU_FadeInDelay=0 [2025-09-23 16:53:18.920] max_time_out=0 [2025-09-23 16:53:18.920] No splash screen [2025-09-23 16:53:18.920] stop dss Done [2025-09-23 16:53:18.920] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:53:18.957] /dev/mem opened. [2025-09-23 16:53:18.957] Memory mapped at address 0xffff9ce4a000. [2025-09-23 16:53:18.957] Read at address 0x00600018 (0xffff9ce4a018): 0x00000000 [2025-09-23 16:53:18.957] Write at address 0x00600018 (0xffff9ce4a018): 0x00400040, readback 0x00400040 [2025-09-23 16:53:18.957] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:53:19.053] Loaded PowerVR consumer services. [2025-09-23 16:53:19.165] 512+0 records in [2025-09-23 16:53:19.180] 512+0 records out [2025-09-23 16:53:19.196] Waiting data available... [2025-09-23 16:53:19.196] Starting syslogd/klogd: done [2025-09-23 16:53:19.212] DML Start [2025-09-23 16:53:19.388] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:53:19.628] DML res1: 0 [2025-09-23 16:53:20.053] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:53:20.053] Read Success [2025-09-23 16:53:20.053] Verifying certificate... [2025-09-23 16:53:20.277] Verified OK [2025-09-23 16:53:20.293] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:53:21.905] Verified OK [2025-09-23 16:53:21.905] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:53:22.524] Verified OK [2025-09-23 16:53:22.524] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:53:25.306] fs.protected_hardlinks = 1 [2025-09-23 16:53:25.306] fs.protected_symlinks = 1 [2025-09-23 16:53:25.321] kernel.modules_disabled = 1 [2025-09-23 16:53:25.513] [2025-09-23 16:53:25.513] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:53:26.734] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:53:34.540] SBL1:1210.0.1.0 [2025-09-23 16:53:34.572] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:53:36.154] SBL2:1210.0.1.0 [2025-09-23 16:53:36.186] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 16:53:36.298] j-A [2025-09-23 16:53:43.635] The R5 Autosar Classic is running [2025-09-23 16:53:43.666] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:53:43.666] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:53:44.274] INIT: version 2.96 booting [2025-09-23 16:53:44.385] INIT: Entering runlevel: 5 [2025-09-23 16:53:44.655] mtd24 attached [2025-09-23 16:53:44.655] mtd28 attached [2025-09-23 16:53:44.655] mtd32 attached [2025-09-23 16:53:44.665] RTNETLINK answers: File exists [2025-09-23 16:53:44.665] ubi0:textures is mounted. [2025-09-23 16:53:44.665] ubi1:animations is mounted. [2025-09-23 16:53:44.665] ubi2:dml_code is mounted. [2025-09-23 16:53:44.665] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:53:44.665] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:53:44.665] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:53:44.665] data.LB_FadeInType0=100 [2025-09-23 16:53:44.665] data.CHLH_FadeInType0=0 [2025-09-23 16:53:44.665] data.WU_FadeInDelay=0 [2025-09-23 16:53:44.665] max_time_out=0 [2025-09-23 16:53:44.665] No splash screen [2025-09-23 16:53:44.665] stop dss Done [2025-09-23 16:53:44.665] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:53:44.665] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:53:44.729] /dev/mem opened. [2025-09-23 16:53:44.729] Memory mapped at address 0xffffa4fd4000. [2025-09-23 16:53:44.729] Read at address 0x00600018 (0xffffa4fd4018): 0x00000000 [2025-09-23 16:53:44.729] Write at address 0x00600018 (0xffffa4fd4018): 0x00400040, readback 0x00400040 [2025-09-23 16:53:44.745] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:53:44.773] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:53:44.869] Loaded PowerVR consumer services. [2025-09-23 16:53:44.986] Waiting data available... [2025-09-23 16:53:44.986] 512+0 records in [2025-09-23 16:53:44.986] 512+0 records out [2025-09-23 16:53:45.002] Starting syslogd/klogd: done [2025-09-23 16:53:45.017] DML Start [2025-09-23 16:53:45.226] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:53:45.434] DML res1: 0 [2025-09-23 16:53:45.865] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:53:45.881] Read Success [2025-09-23 16:53:45.881] Verifying certificate... [2025-09-23 16:53:46.137] Verified OK [2025-09-23 16:53:46.137] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:53:47.847] Verified OK [2025-09-23 16:53:47.847] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:53:48.444] Verified OK [2025-09-23 16:53:48.444] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:53:51.082] fs.protected_hardlinks = 1 [2025-09-23 16:53:51.082] fs.protected_symlinks = 1 [2025-09-23 16:53:51.117] kernel.modules_disabled = 1 [2025-09-23 16:53:51.290] [2025-09-23 16:53:51.290] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:53:52.537] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:54:00.759] SBL1:1210.0.1.0 [2025-09-23 16:54:00.760] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:54:02.115] SBL2:1210.0.1.0 [2025-09-23 16:54:02.147] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:54:02.258] j-A [2025-09-23 16:54:09.614] The R5 Autosar Classic is running [2025-09-23 16:54:09.626] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:54:09.626] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:54:10.234] INIT: version 2.96 booting [2025-09-23 16:54:10.346] INIT: Entering runlevel: 5 [2025-09-23 16:54:10.506] mtd28 attached [2025-09-23 16:54:10.506] mtd24 attached [2025-09-23 16:54:10.624] mtd32 attached [2025-09-23 16:54:10.625] ubi0:animations is mounted. [2025-09-23 16:54:10.638] ubi1:textures is mounted. [2025-09-23 16:54:10.638] RTNETLINK answers: File exists [2025-09-23 16:54:10.638] ubi2:dml_code is mounted. [2025-09-23 16:54:10.638] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:54:10.638] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:54:10.638] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:54:10.638] data.LB_FadeInType0=100 [2025-09-23 16:54:10.638] data.CHLH_FadeInType0=0 [2025-09-23 16:54:10.638] data.WU_FadeInDelay=0 [2025-09-23 16:54:10.638] max_time_out=0 [2025-09-23 16:54:10.638] No splash screen [2025-09-23 16:54:10.638] stop dss Done [2025-09-23 16:54:10.638] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:54:10.638] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:54:10.654] /dev/mem opened. [2025-09-23 16:54:10.685] Memory mapped at address 0xffffa08aa000. [2025-09-23 16:54:10.685] Read at address 0x00600018 (0xffffa08aa018): 0x00000000 [2025-09-23 16:54:10.685] Write at address 0x00600018 (0xffffa08aa018): 0x00400040, readback 0x00400040 [2025-09-23 16:54:10.749] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:54:10.749] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:54:10.893] Loaded PowerVR consumer services. [2025-09-23 16:54:10.941] 512+0 records in [2025-09-23 16:54:10.941] 512+0 records out [2025-09-23 16:54:10.973] Starting syslogd/klogd: Waiting data available... [2025-09-23 16:54:10.989] done [2025-09-23 16:54:11.005] DML Start [2025-09-23 16:54:11.149] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:54:11.639] DML res1: 0 [2025-09-23 16:54:11.894] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:54:11.894] Read Success [2025-09-23 16:54:11.894] Verifying certificate... [2025-09-23 16:54:12.118] Verified OK [2025-09-23 16:54:12.134] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:54:13.901] Verified OK [2025-09-23 16:54:13.901] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:54:14.429] Verified OK [2025-09-23 16:54:14.430] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:54:16.986] fs.protected_hardlinks = 1 [2025-09-23 16:54:17.002] fs.protected_symlinks = 1 [2025-09-23 16:54:17.002] kernel.modules_disabled = 1 [2025-09-23 16:54:17.211] [2025-09-23 16:54:17.211] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:54:18.514] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:54:26.609] SBL1:1210.0.1.0 [2025-09-23 16:54:26.657] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:54:28.224] SBL2:1210.0.1.0 [2025-09-23 16:54:28.256] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:54:28.367] j-A [2025-09-23 16:54:35.767] The R5 Autosar Classic is running [2025-09-23 16:54:35.767] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:54:35.767] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:54:36.347] INIT: version 2.96 booting [2025-09-23 16:54:36.460] INIT: Entering runlevel: 5 [2025-09-23 16:54:36.604] mtd24 attached [2025-09-23 16:54:36.779] mtd28 attached [2025-09-23 16:54:36.779] mtd32 attached [2025-09-23 16:54:36.780] ubi0:textures is mounted. [2025-09-23 16:54:36.780] RTNETLINK answers: File exists [2025-09-23 16:54:36.780] ubi1:animations is mounted. [2025-09-23 16:54:36.780] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:54:36.780] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:54:36.780] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:54:36.780] ubi2:dml_code is mounted. [2025-09-23 16:54:36.780] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:54:36.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:54:36.780] data.LB_FadeInType0=100 [2025-09-23 16:54:36.780] data.CHLH_FadeInType0=0 [2025-09-23 16:54:36.780] data.WU_FadeInDelay=0 [2025-09-23 16:54:36.780] max_time_out=0 [2025-09-23 16:54:36.780] No splash screen [2025-09-23 16:54:36.780] stop dss Done [2025-09-23 16:54:36.780] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:54:36.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:54:36.831] /dev/mem opened. [2025-09-23 16:54:36.831] Memory mapped at address 0xffff96613000. [2025-09-23 16:54:36.831] Read at address 0x00600018 (0xffff96613018): 0x00000000 [2025-09-23 16:54:36.831] Write at address 0x00600018 (0xffff96613018): 0x00400040, readback 0x00400040 [2025-09-23 16:54:36.879] Loaded PowerVR consumer services. [2025-09-23 16:54:37.054] 512+0 records in [2025-09-23 16:54:37.054] 512+0 records out [2025-09-23 16:54:37.054] Waiting data available... [2025-09-23 16:54:37.069] Starting syslogd/klogd: done [2025-09-23 16:54:37.101] DML Start [2025-09-23 16:54:37.262] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:54:37.780] DML res1: 0 [2025-09-23 16:54:37.961] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:54:37.961] Read Success [2025-09-23 16:54:37.961] Verifying certificate... [2025-09-23 16:54:38.217] Verified OK [2025-09-23 16:54:38.233] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:54:39.777] Verified OK [2025-09-23 16:54:39.777] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:54:40.360] Verified OK [2025-09-23 16:54:40.360] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:54:43.174] fs.protected_hardlinks = 1 [2025-09-23 16:54:43.174] fs.protected_symlinks = 1 [2025-09-23 16:54:43.190] kernel.modules_disabled = 1 [2025-09-23 16:54:43.381] [2025-09-23 16:54:43.381] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:54:44.609] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:54:52.353] SBL1:1210.0.1.0 [2025-09-23 16:54:52.401] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:54:53.969] SBL2:1210.0.1.0 [2025-09-23 16:54:54.016] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:54:54.112] j-A [2025-09-23 16:55:01.466] The R5 Autosar Classic is running [2025-09-23 16:55:01.490] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:55:01.490] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:55:02.099] INIT: version 2.96 booting [2025-09-23 16:55:02.210] INIT: Entering runlevel: 5 [2025-09-23 16:55:02.353] mtd24 attached [2025-09-23 16:55:02.369] mtd28 attached [2025-09-23 16:55:02.401] mtd32 attached [2025-09-23 16:55:02.401] ubi0:textures is mounted. [2025-09-23 16:55:02.524] ubi1:animations is mounted. [2025-09-23 16:55:02.525] RTNETLINK answers: File exists [2025-09-23 16:55:02.525] ubi2:dml_code is mounted. [2025-09-23 16:55:02.525] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:55:02.525] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:55:02.525] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:55:02.525] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:55:02.525] data.LB_FadeInType0=100 [2025-09-23 16:55:02.525] data.CHLH_FadeInType0=0 [2025-09-23 16:55:02.525] data.WU_FadeInDelay=0 [2025-09-23 16:55:02.525] max_time_out=0 [2025-09-23 16:55:02.525] No splash screen [2025-09-23 16:55:02.525] stop dss Done [2025-09-23 16:55:02.525] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:55:02.563] /dev/mem opened. [2025-09-23 16:55:02.563] Memory mapped at address 0xffffb4931000. [2025-09-23 16:55:02.563] Read at address 0x00600018 (0xffffb4931018): 0x00000000 [2025-09-23 16:55:02.563] Write at address 0x00600018 (0xffffb4931018): 0x00400040, readback 0x00400040 [2025-09-23 16:55:02.563] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:55:02.579] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:55:02.786] Loaded PowerVR consumer services. [2025-09-23 16:55:02.818] Waiting data available... [2025-09-23 16:55:02.834] 512+0 records in [2025-09-23 16:55:02.834] 512+0 records out [2025-09-23 16:55:02.850] Starting syslogd/klogd: done [2025-09-23 16:55:02.866] DML Start [2025-09-23 16:55:03.026] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:55:03.234] DML res1: 0 [2025-09-23 16:55:03.707] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:55:03.707] Read Success [2025-09-23 16:55:03.707] Verifying certificate... [2025-09-23 16:55:03.931] Verified OK [2025-09-23 16:55:03.947] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:55:05.808] Verified OK [2025-09-23 16:55:05.808] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:55:06.376] Verified OK [2025-09-23 16:55:06.376] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:55:08.822] fs.protected_hardlinks = 1 [2025-09-23 16:55:08.838] fs.protected_symlinks = 1 [2025-09-23 16:55:08.838] kernel.modules_disabled = 1 [2025-09-23 16:55:09.029] [2025-09-23 16:55:09.029] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:55:10.380] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:55:18.148] SBL1:1210.0.1.0 [2025-09-23 16:55:18.180] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:55:19.763] SBL2:1210.0.1.0 [2025-09-23 16:55:19.814] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:55:19.906] j-A [2025-09-23 16:55:27.245] The R5 Autosar Classic is running [2025-09-23 16:55:27.270] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:55:27.270] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:55:27.877] INIT: version 2.96 booting [2025-09-23 16:55:27.988] INIT: Entering runlevel: 5 [2025-09-23 16:55:28.148] mtd28 attached [2025-09-23 16:55:28.148] mtd24 attached [2025-09-23 16:55:28.165] mtd32 attached [2025-09-23 16:55:28.213] RTNETLINK answers: File exists [2025-09-23 16:55:28.280] ubi0:animations is mounted. [2025-09-23 16:55:28.280] ubi1:textures is mounted. [2025-09-23 16:55:28.280] ubi2:dml_code is mounted. [2025-09-23 16:55:28.280] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:55:28.280] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:55:28.280] data.LB_FadeInType0=100 [2025-09-23 16:55:28.280] data.CHLH_FadeInType0=0 [2025-09-23 16:55:28.280] data.WU_FadeInDelay=0 [2025-09-23 16:55:28.280] max_time_out=0 [2025-09-23 16:55:28.280] No splash screen [2025-09-23 16:55:28.280] stop dss Done [2025-09-23 16:55:28.280] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:55:28.280] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:55:28.280] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:55:28.332] /dev/mem opened. [2025-09-23 16:55:28.332] Memory mapped at address 0xffffbb332000. [2025-09-23 16:55:28.332] Read at address 0x00600018 (0xffffbb332018): 0x00000000 [2025-09-23 16:55:28.332] Write at address 0x00600018 (0xffffbb332018): 0x00400040, readback 0x00400040 [2025-09-23 16:55:28.371] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:55:28.371] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:55:28.547] Loaded PowerVR consumer services. [2025-09-23 16:55:28.611] 512+0 records in [2025-09-23 16:55:28.611] 512+0 records out [2025-09-23 16:55:28.627] Waiting data available... [2025-09-23 16:55:28.643] Starting syslogd/klogd: done [2025-09-23 16:55:28.659] DML Start [2025-09-23 16:55:28.851] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:55:29.058] DML res1: 0 [2025-09-23 16:55:29.533] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:55:29.534] Read Success [2025-09-23 16:55:29.534] Verifying certificate... [2025-09-23 16:55:29.805] Verified OK [2025-09-23 16:55:29.821] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:55:31.499] Verified OK [2025-09-23 16:55:31.499] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:55:32.118] Verified OK [2025-09-23 16:55:32.118] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:55:34.660] fs.protected_hardlinks = 1 [2025-09-23 16:55:34.660] fs.protected_symlinks = 1 [2025-09-23 16:55:34.660] kernel.modules_disabled = 1 [2025-09-23 16:55:34.851] [2025-09-23 16:55:34.851] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:55:36.155] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:55:43.908] SBL1:1210.0.1.0 [2025-09-23 16:55:43.955] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:55:45.522] SBL2:1210.0.1.0 [2025-09-23 16:55:45.570] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:55:45.666] j-A [2025-09-23 16:55:53.020] The R5 Autosar Classic is running [2025-09-23 16:55:53.042] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:55:53.042] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:55:53.665] INIT: version 2.96 booting [2025-09-23 16:55:54.078] INIT: Entering runlevel: 5 [2025-09-23 16:55:54.078] mtd24 attached [2025-09-23 16:55:54.078] mtd28 attached [2025-09-23 16:55:54.078] mtd32 attached [2025-09-23 16:55:54.078] ubi0:textures is mounted. [2025-09-23 16:55:54.078] RTNETLINK answers: File exists [2025-09-23 16:55:54.078] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:55:54.078] ubi1:animations is mounted. [2025-09-23 16:55:54.078] ubi2:dml_code is mounted. [2025-09-23 16:55:54.078] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:55:54.078] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:55:54.078] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:55:54.078] data.LB_FadeInType0=100 [2025-09-23 16:55:54.078] data.CHLH_FadeInType0=0 [2025-09-23 16:55:54.078] data.WU_FadeInDelay=0 [2025-09-23 16:55:54.078] max_time_out=0 [2025-09-23 16:55:54.078] No splash screen [2025-09-23 16:55:54.078] stop dss Done [2025-09-23 16:55:54.078] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:55:54.126] /dev/mem opened. [2025-09-23 16:55:54.126] Memory mapped at address 0xffffa2384000. [2025-09-23 16:55:54.126] Read at address 0x00600018 (0xffffa2384018): 0x00000000 [2025-09-23 16:55:54.126] Write at address 0x00600018 (0xffffa2384018): 0x00400040, readback 0x00400040 [2025-09-23 16:55:54.126] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:55:54.142] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:55:54.238] Loaded PowerVR consumer services. [2025-09-23 16:55:54.366] 512+0 records in [2025-09-23 16:55:54.366] 512+0 records out [2025-09-23 16:55:54.382] Waiting data available... [2025-09-23 16:55:54.414] Starting syslogd/klogd: done [2025-09-23 16:55:54.430] DML Start [2025-09-23 16:55:54.622] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:55:55.079] DML res1: 0 [2025-09-23 16:55:55.270] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:55:55.270] Read Success [2025-09-23 16:55:55.270] Verifying certificate... [2025-09-23 16:55:55.542] Verified OK [2025-09-23 16:55:55.558] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:55:57.274] Verified OK [2025-09-23 16:55:57.274] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:55:57.877] Verified OK [2025-09-23 16:55:57.877] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:56:00.434] fs.protected_hardlinks = 1 [2025-09-23 16:56:00.449] fs.protected_symlinks = 1 [2025-09-23 16:56:00.449] kernel.modules_disabled = 1 [2025-09-23 16:56:00.657] [2025-09-23 16:56:00.657] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:56:01.916] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:56:09.881] SBL1:1210.0.1.0 [2025-09-23 16:56:09.912] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:56:11.479] SBL2:1210.0.1.0 [2025-09-23 16:56:11.527] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:56:11.623] j-A [2025-09-23 16:56:18.978] The R5 Autosar Classic is running [2025-09-23 16:56:19.002] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:56:19.002] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:56:19.611] INIT: version 2.96 booting [2025-09-23 16:56:19.721] INIT: Entering runlevel: 5 [2025-09-23 16:56:19.880] mtd32 attached [2025-09-23 16:56:19.880] mtd24 attached [2025-09-23 16:56:19.896] mtd28 attached [2025-09-23 16:56:19.913] ubi0:dml_code is mounted. [2025-09-23 16:56:20.020] RTNETLINK answers: File exists [2025-09-23 16:56:20.020] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:56:20.020] ubi2:animations is mounted. [2025-09-23 16:56:20.020] ubi1:textures is mounted. [2025-09-23 16:56:20.020] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:56:20.020] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:56:20.020] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:56:20.020] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:56:20.020] data.LB_FadeInType0=100 [2025-09-23 16:56:20.020] data.CHLH_FadeInType0=0 [2025-09-23 16:56:20.020] data.WU_FadeInDelay=0 [2025-09-23 16:56:20.020] max_time_out=0 [2025-09-23 16:56:20.020] No splash screen [2025-09-23 16:56:20.020] stop dss Done [2025-09-23 16:56:20.035] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:56:20.074] /dev/mem opened. [2025-09-23 16:56:20.074] Memory mapped at address 0xffff8b47f000. [2025-09-23 16:56:20.074] Read at address 0x00600018 (0xffff8b47f018): 0x00000000 [2025-09-23 16:56:20.074] Write at address 0x00600018 (0xffff8b47f018): 0x00400040, readback 0x00400040 [2025-09-23 16:56:20.074] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:56:20.201] Loaded PowerVR consumer services. [2025-09-23 16:56:20.338] 512+0 records in [2025-09-23 16:56:20.338] 512+0 records out [2025-09-23 16:56:20.338] Waiting data available... [2025-09-23 16:56:20.370] Starting syslogd/klogd: done [2025-09-23 16:56:20.402] DML Start [2025-09-23 16:56:20.578] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:56:21.033] DML res1: 0 [2025-09-23 16:56:21.233] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:56:21.249] Read Success [2025-09-23 16:56:21.249] Verifying certificate... [2025-09-23 16:56:21.506] Verified OK [2025-09-23 16:56:21.522] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:56:23.219] Verified OK [2025-09-23 16:56:23.219] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:56:23.815] Verified OK [2025-09-23 16:56:23.815] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:56:26.342] fs.protected_hardlinks = 1 [2025-09-23 16:56:26.342] fs.protected_symlinks = 1 [2025-09-23 16:56:26.357] kernel.modules_disabled = 1 [2025-09-23 16:56:26.549] [2025-09-23 16:56:26.549] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:56:27.893] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:56:35.597] SBL1:1210.0.1.0 [2025-09-23 16:56:35.645] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:56:37.211] SBL2:1210.0.1.0 [2025-09-23 16:56:37.259] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:56:37.356] j-A [2025-09-23 16:56:44.710] The R5 Autosar Classic is running [2025-09-23 16:56:44.710] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:56:44.731] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:56:45.339] INIT: version 2.96 booting [2025-09-23 16:56:45.450] INIT: Entering runlevel: 5 [2025-09-23 16:56:45.611] mtd28 attached [2025-09-23 16:56:45.611] mtd24 attached [2025-09-23 16:56:45.643] mtd32 attached [2025-09-23 16:56:45.659] ubi0:animations is mounted. [2025-09-23 16:56:45.675] RTNETLINK answers: File exists [2025-09-23 16:56:45.740] ubi1:textures is mounted. [2025-09-23 16:56:45.740] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:56:45.740] ubi2:dml_code is mounted. [2025-09-23 16:56:45.740] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:56:45.740] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:56:45.740] data.LB_FadeInType0=100 [2025-09-23 16:56:45.740] data.CHLH_FadeInType0=0 [2025-09-23 16:56:45.740] data.WU_FadeInDelay=0 [2025-09-23 16:56:45.740] max_time_out=0 [2025-09-23 16:56:45.740] No splash screen [2025-09-23 16:56:45.740] stop dss Done [2025-09-23 16:56:45.740] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:56:45.740] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:56:45.811] /dev/mem opened. [2025-09-23 16:56:45.811] Memory mapped at address 0xffffa8574000. [2025-09-23 16:56:45.811] Read at address 0x00600018 (0xffffa8574018): 0x00000000 [2025-09-23 16:56:45.811] Write at address 0x00600018 (0xffffa8574018): 0x00400040, readback 0x00400040 [2025-09-23 16:56:45.827] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:56:45.843] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:56:46.019] Loaded PowerVR consumer services. [2025-09-23 16:56:46.052] 512+0 records in [2025-09-23 16:56:46.052] 512+0 records out [2025-09-23 16:56:46.084] Waiting data available... [2025-09-23 16:56:46.100] Starting syslogd/klogd: done [2025-09-23 16:56:46.132] DML Start [2025-09-23 16:56:46.292] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:56:46.515] DML res1: 0 [2025-09-23 16:56:47.006] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:56:47.006] Read Success [2025-09-23 16:56:47.006] Verifying certificate... [2025-09-23 16:56:47.359] Verified OK [2025-09-23 16:56:47.359] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:56:48.973] Verified OK [2025-09-23 16:56:48.973] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:56:49.580] Verified OK [2025-09-23 16:56:49.580] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:56:52.186] fs.protected_hardlinks = 1 [2025-09-23 16:56:52.202] fs.protected_symlinks = 1 [2025-09-23 16:56:52.202] kernel.modules_disabled = 1 [2025-09-23 16:56:52.410] [2025-09-23 16:56:52.410] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:56:53.643] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:57:01.387] SBL1:1210.0.1.0 [2025-09-23 16:57:01.435] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:57:03.001] SBL2:1210.0.1.0 [2025-09-23 16:57:03.049] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:57:03.145] j-A [2025-09-23 16:57:10.499] The R5 Autosar Classic is running [2025-09-23 16:57:10.523] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:57:10.523] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:57:11.132] INIT: version 2.96 booting [2025-09-23 16:57:11.243] INIT: Entering runlevel: 5 [2025-09-23 16:57:11.403] mtd28 attached [2025-09-23 16:57:11.403] mtd32 attached [2025-09-23 16:57:11.419] mtd24 attached [2025-09-23 16:57:11.506] RTNETLINK answers: File exists [2025-09-23 16:57:11.506] ubi0:animations is mounted. [2025-09-23 16:57:11.506] ubi1:dml_code is mounted. [2025-09-23 16:57:11.506] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:57:11.506] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:57:11.506] ubi2:textures is mounted. [2025-09-23 16:57:11.506] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:57:11.506] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:57:11.506] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:57:11.557] data.LB_FadeInType0=100 [2025-09-23 16:57:11.557] data.CHLH_FadeInType0=0 [2025-09-23 16:57:11.557] data.WU_FadeInDelay=0 [2025-09-23 16:57:11.557] max_time_out=0 [2025-09-23 16:57:11.557] No splash screen [2025-09-23 16:57:11.557] stop dss Done [2025-09-23 16:57:11.565] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:57:11.607] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:57:11.607] /dev/mem opened. [2025-09-23 16:57:11.607] Memory mapped at address 0xffff9b66c000. [2025-09-23 16:57:11.607] Read at address 0x00600018 (0xffff9b66c018): 0x00000000 [2025-09-23 16:57:11.607] Write at address 0x00600018 (0xffff9b66c018): 0x00400040, readback 0x00400040 [2025-09-23 16:57:11.718] Loaded PowerVR consumer services. [2025-09-23 16:57:11.869] 512+0 records in [2025-09-23 16:57:11.869] 512+0 records out [2025-09-23 16:57:11.869] Waiting data available... [2025-09-23 16:57:11.917] Starting syslogd/klogd: done [2025-09-23 16:57:11.933] DML Start [2025-09-23 16:57:12.076] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:57:12.563] DML res1: 0 [2025-09-23 16:57:12.786] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:57:12.786] Read Success [2025-09-23 16:57:12.786] Verifying certificate... [2025-09-23 16:57:13.042] Verified OK [2025-09-23 16:57:13.058] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:57:14.729] Verified OK [2025-09-23 16:57:14.729] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:57:15.268] Verified OK [2025-09-23 16:57:15.268] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:57:17.745] fs.protected_hardlinks = 1 [2025-09-23 16:57:17.745] fs.protected_symlinks = 1 [2025-09-23 16:57:17.761] kernel.modules_disabled = 1 [2025-09-23 16:57:17.952] [2025-09-23 16:57:17.952] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:57:19.454] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:57:27.154] SBL1:1210.0.1.0 [2025-09-23 16:57:27.185] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:57:28.768] SBL2:1210.0.1.0 [2025-09-23 16:57:28.815] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:57:28.912] j-A [2025-09-23 16:57:36.284] The R5 Autosar Classic is running [2025-09-23 16:57:36.284] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:57:36.284] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:57:36.891] INIT: version 2.96 booting [2025-09-23 16:57:37.003] INIT: Entering runlevel: 5 [2025-09-23 16:57:37.330] mtd32 attached [2025-09-23 16:57:37.330] mtd24 attached [2025-09-23 16:57:37.330] mtd28 attached [2025-09-23 16:57:37.330] ubi0:dml_code is mounted. [2025-09-23 16:57:37.330] ubi1:textures is mounted. [2025-09-23 16:57:37.330] RTNETLINK answers: File exists [2025-09-23 16:57:37.330] ubi2:animations is mounted. [2025-09-23 16:57:37.330] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:57:37.330] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:57:37.330] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:57:37.330] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:57:37.330] data.LB_FadeInType0=100 [2025-09-23 16:57:37.330] data.CHLH_FadeInType0=0 [2025-09-23 16:57:37.330] data.WU_FadeInDelay=0 [2025-09-23 16:57:37.330] max_time_out=0 [2025-09-23 16:57:37.330] No splash screen [2025-09-23 16:57:37.330] stop dss Done [2025-09-23 16:57:37.330] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:57:37.330] /dev/mem opened. [2025-09-23 16:57:37.330] Memory mapped at address 0xffffa96d4000. [2025-09-23 16:57:37.342] Read at address 0x00600018 (0xffffa96d4018): 0x00000000 [2025-09-23 16:57:37.342] Write at address 0x00600018 (0xffffa96d4018): 0x00400040, readback 0x00400040 [2025-09-23 16:57:37.358] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:57:37.374] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:57:37.454] Loaded PowerVR consumer services. [2025-09-23 16:57:37.610] Waiting data available... [2025-09-23 16:57:37.610] 512+0 records in [2025-09-23 16:57:37.610] 512+0 records out [2025-09-23 16:57:37.626] Starting syslogd/klogd: done [2025-09-23 16:57:37.642] DML Start [2025-09-23 16:57:37.833] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:57:38.073] DML res1: 0 [2025-09-23 16:57:38.489] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:57:38.505] Read Success [2025-09-23 16:57:38.505] Verifying certificate... [2025-09-23 16:57:38.777] Verified OK [2025-09-23 16:57:38.845] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:57:40.423] Verified OK [2025-09-23 16:57:40.423] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:57:41.091] Verified OK [2025-09-23 16:57:41.091] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:57:43.857] fs.protected_hardlinks = 1 [2025-09-23 16:57:43.878] fs.protected_symlinks = 1 [2025-09-23 16:57:43.878] kernel.modules_disabled = 1 [2025-09-23 16:57:44.064] [2025-09-23 16:57:44.064] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:57:45.179] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:57:53.055] SBL1:1210.0.1.0 [2025-09-23 16:57:53.102] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:57:54.670] SBL2:1210.0.1.0 [2025-09-23 16:57:54.718] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:57:54.813] j-A [2025-09-23 16:58:02.168] The R5 Autosar Classic is running [2025-09-23 16:58:02.168] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:58:02.188] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:58:02.796] INIT: version 2.96 booting [2025-09-23 16:58:03.205] INIT: Entering runlevel: 5 [2025-09-23 16:58:03.205] mtd24 attached [2025-09-23 16:58:03.205] mtd28 attached [2025-09-23 16:58:03.205] mtd32 attached [2025-09-23 16:58:03.205] ubi0:textures is mounted. [2025-09-23 16:58:03.205] RTNETLINK answers: File exists [2025-09-23 16:58:03.205] ubi1:animations is mounted. [2025-09-23 16:58:03.205] ubi2:dml_code is mounted. [2025-09-23 16:58:03.205] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:58:03.205] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:58:03.205] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:58:03.205] data.LB_FadeInType0=100 [2025-09-23 16:58:03.205] data.CHLH_FadeInType0=0 [2025-09-23 16:58:03.205] data.WU_FadeInDelay=0 [2025-09-23 16:58:03.205] max_time_out=0 [2025-09-23 16:58:03.205] No splash screen [2025-09-23 16:58:03.205] stop dss Done [2025-09-23 16:58:03.205] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:58:03.205] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:58:03.230] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:58:03.230] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:58:03.262] /dev/mem opened. [2025-09-23 16:58:03.262] Memory mapped at address 0xffffbebb8000. [2025-09-23 16:58:03.262] Read at address 0x00600018 (0xffffbebb8018): 0x00000000 [2025-09-23 16:58:03.262] Write at address 0x00600018 (0xffffbebb8018): 0x00400040, readback 0x00400040 [2025-09-23 16:58:03.517] Loaded PowerVR consumer services. [2025-09-23 16:58:03.554] Waiting data available... [2025-09-23 16:58:03.554] 512+0 records in [2025-09-23 16:58:03.554] 512+0 records out [2025-09-23 16:58:03.586] Starting syslogd/klogd: done [2025-09-23 16:58:03.602] DML Start [2025-09-23 16:58:03.779] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:58:04.019] DML res1: 0 [2025-09-23 16:58:04.430] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:58:04.430] Read Success [2025-09-23 16:58:04.430] Verifying certificate... [2025-09-23 16:58:04.653] Verified OK [2025-09-23 16:58:04.685] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:58:06.422] Verified OK [2025-09-23 16:58:06.422] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:58:07.056] Verified OK [2025-09-23 16:58:07.056] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:58:09.694] fs.protected_hardlinks = 1 [2025-09-23 16:58:09.694] fs.protected_symlinks = 1 [2025-09-23 16:58:09.710] kernel.modules_disabled = 1 [2025-09-23 16:58:09.902] [2025-09-23 16:58:09.902] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:58:11.101] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:58:18.823] SBL1:1210.0.1.0 [2025-09-23 16:58:18.871] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:58:20.436] SBL2:1210.0.1.0 [2025-09-23 16:58:20.472] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:58:20.581] j-A [2025-09-23 16:58:27.934] The R5 Autosar Classic is running [2025-09-23 16:58:27.934] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:58:27.955] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:58:28.562] INIT: version 2.96 booting [2025-09-23 16:58:28.971] INIT: Entering runlevel: 5 [2025-09-23 16:58:28.971] mtd24 attached [2025-09-23 16:58:28.971] mtd28 attached [2025-09-23 16:58:28.971] mtd32 attached [2025-09-23 16:58:28.971] ubi0:textures is mounted. [2025-09-23 16:58:28.971] ubi1:animations is mounted. [2025-09-23 16:58:28.971] RTNETLINK answers: File exists [2025-09-23 16:58:28.971] ubi2:dml_code is mounted. [2025-09-23 16:58:28.971] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:58:28.971] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:58:28.971] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:58:28.971] data.LB_FadeInType0=100 [2025-09-23 16:58:28.971] data.CHLH_FadeInType0=0 [2025-09-23 16:58:28.971] data.WU_FadeInDelay=0 [2025-09-23 16:58:28.971] max_time_out=0 [2025-09-23 16:58:28.971] No splash screen [2025-09-23 16:58:28.971] stop dss Done [2025-09-23 16:58:28.971] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:58:28.971] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:58:29.042] /dev/mem opened. [2025-09-23 16:58:29.042] Memory mapped at address 0xffffa2282000. [2025-09-23 16:58:29.042] Read at address 0x00600018 (0xffffa2282018): 0x00000000 [2025-09-23 16:58:29.042] Write at address 0x00600018 (0xffffa2282018): 0x00400040, readback 0x00400040 [2025-09-23 16:58:29.042] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:58:29.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:58:29.249] Loaded PowerVR consumer services. [2025-09-23 16:58:29.266] Waiting data available... [2025-09-23 16:58:29.281] 512+0 records in [2025-09-23 16:58:29.297] 512+0 records out [2025-09-23 16:58:29.329] Starting syslogd/klogd: done [2025-09-23 16:58:29.345] DML Start [2025-09-23 16:58:29.537] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:58:29.986] DML res1: 0 [2025-09-23 16:58:30.170] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:58:30.170] Read Success [2025-09-23 16:58:30.170] Verifying certificate... [2025-09-23 16:58:30.426] Verified OK [2025-09-23 16:58:30.458] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:58:32.274] Verified OK [2025-09-23 16:58:32.274] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:58:32.806] Verified OK [2025-09-23 16:58:32.806] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:58:35.349] fs.protected_hardlinks = 1 [2025-09-23 16:58:35.365] fs.protected_symlinks = 1 [2025-09-23 16:58:35.365] kernel.modules_disabled = 1 [2025-09-23 16:58:35.573] [2025-09-23 16:58:35.573] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:58:36.819] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:58:44.578] SBL1:1210.0.1.0 [2025-09-23 16:58:44.626] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:58:46.193] SBL2:1210.0.1.0 [2025-09-23 16:58:46.225] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:58:46.337] j-A [2025-09-23 16:58:53.691] The R5 Autosar Classic is running [2025-09-23 16:58:53.691] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:58:53.712] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:58:54.319] INIT: version 2.96 booting [2025-09-23 16:58:54.721] INIT: Entering runlevel: 5 [2025-09-23 16:58:54.721] mtd24 attached [2025-09-23 16:58:54.721] mtd28 attached [2025-09-23 16:58:54.721] mtd32 attached [2025-09-23 16:58:54.721] ubi0:textures is mounted. [2025-09-23 16:58:54.721] ubi1:animations is mounted. [2025-09-23 16:58:54.721] RTNETLINK answers: File exists [2025-09-23 16:58:54.721] ubi2:dml_code is mounted. [2025-09-23 16:58:54.721] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:58:54.721] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:58:54.721] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:58:54.721] data.LB_FadeInType0=100 [2025-09-23 16:58:54.721] data.CHLH_FadeInType0=0 [2025-09-23 16:58:54.721] data.WU_FadeInDelay=0 [2025-09-23 16:58:54.721] max_time_out=0 [2025-09-23 16:58:54.721] No splash screen [2025-09-23 16:58:54.721] stop dss Done [2025-09-23 16:58:54.721] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:58:54.721] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:58:54.762] /dev/mem opened. [2025-09-23 16:58:54.762] Memory mapped at address 0xffff995c7000. [2025-09-23 16:58:54.798] Read at address 0x00600018 (0xffff995c7018): 0x00000000 [2025-09-23 16:58:54.798] Write at address 0x00600018 (0xffff995c7018): 0x00400040, readback 0x00400040 [2025-09-23 16:58:54.798] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:58:54.798] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:58:54.911] Loaded PowerVR consumer services. [2025-09-23 16:58:55.050] Waiting data available... [2025-09-23 16:58:55.050] 512+0 records in [2025-09-23 16:58:55.050] 512+0 records out [2025-09-23 16:58:55.065] Starting syslogd/klogd: done [2025-09-23 16:58:55.081] DML Start [2025-09-23 16:58:55.241] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:58:55.465] DML res1: 0 [2025-09-23 16:58:55.961] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:58:55.982] Read Success [2025-09-23 16:58:55.982] Verifying certificate... [2025-09-23 16:58:56.222] Verified OK [2025-09-23 16:58:56.238] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:58:57.853] Verified OK [2025-09-23 16:58:57.853] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:58:58.529] Verified OK [2025-09-23 16:58:58.529] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:59:01.120] fs.protected_hardlinks = 1 [2025-09-23 16:59:01.136] fs.protected_symlinks = 1 [2025-09-23 16:59:01.152] kernel.modules_disabled = 1 [2025-09-23 16:59:01.343] [2025-09-23 16:59:01.343] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:59:02.590] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:59:10.333] SBL1:1210.0.1.0 [2025-09-23 16:59:10.365] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:59:11.948] SBL2:1210.0.1.0 [2025-09-23 16:59:11.980] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:59:12.092] j-A [2025-09-23 16:59:19.429] The R5 Autosar Classic is running [2025-09-23 16:59:19.460] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:59:19.460] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:59:20.068] INIT: version 2.96 booting [2025-09-23 16:59:20.180] INIT: Entering runlevel: 5 [2025-09-23 16:59:20.471] mtd32 attached [2025-09-23 16:59:20.471] mtd28 attached [2025-09-23 16:59:20.471] mtd24 attached [2025-09-23 16:59:20.471] RTNETLINK answers: File exists [2025-09-23 16:59:20.471] ubi0:dml_code is mounted. [2025-09-23 16:59:20.471] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:59:20.471] ubi1:animations is mounted. [2025-09-23 16:59:20.471] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:59:20.471] ubi2:textures is mounted. [2025-09-23 16:59:20.471] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:59:20.471] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:59:20.471] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:59:20.471] data.LB_FadeInType0=100 [2025-09-23 16:59:20.471] data.CHLH_FadeInType0=0 [2025-09-23 16:59:20.471] data.WU_FadeInDelay=0 [2025-09-23 16:59:20.471] max_time_out=0 [2025-09-23 16:59:20.471] No splash screen [2025-09-23 16:59:20.471] stop dss Done [2025-09-23 16:59:20.491] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:59:20.507] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:59:20.542] /dev/mem opened. [2025-09-23 16:59:20.542] Memory mapped at address 0xffffbba58000. [2025-09-23 16:59:20.542] Read at address 0x00600018 (0xffffbba58018): 0x00000000 [2025-09-23 16:59:20.542] Write at address 0x00600018 (0xffffbba58018): 0x00400040, readback 0x00400040 [2025-09-23 16:59:20.766] Loaded PowerVR consumer services. [2025-09-23 16:59:20.798] Waiting data available... [2025-09-23 16:59:20.798] 512+0 records in [2025-09-23 16:59:20.798] 512+0 records out [2025-09-23 16:59:20.862] Starting syslogd/klogd: done [2025-09-23 16:59:20.878] DML Start [2025-09-23 16:59:21.038] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:59:21.277] DML res1: 0 [2025-09-23 16:59:21.769] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:59:21.769] Read Success [2025-09-23 16:59:21.769] Verifying certificate... [2025-09-23 16:59:22.018] Verified OK [2025-09-23 16:59:22.018] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:59:23.655] Verified OK [2025-09-23 16:59:23.655] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:59:24.273] Verified OK [2025-09-23 16:59:24.273] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:59:26.977] fs.protected_hardlinks = 1 [2025-09-23 16:59:26.977] fs.protected_symlinks = 1 [2025-09-23 16:59:26.978] kernel.modules_disabled = 1 [2025-09-23 16:59:27.167] [2025-09-23 16:59:27.167] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:59:28.382] RTNETLINK answers: Cannot assign requested address [2025-09-23 16:59:36.095] SBL1:1210.0.1.0 [2025-09-23 16:59:36.143] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 16:59:37.709] SBL2:1210.0.1.0 [2025-09-23 16:59:37.757] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 16:59:37.853] j-A [2025-09-23 16:59:45.207] The R5 Autosar Classic is running [2025-09-23 16:59:45.232] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 16:59:45.232] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 16:59:45.839] INIT: version 2.96 booting [2025-09-23 16:59:45.950] INIT: Entering runlevel: 5 [2025-09-23 16:59:46.111] mtd28 attached [2025-09-23 16:59:46.111] mtd32 attached [2025-09-23 16:59:46.127] mtd24 attached [2025-09-23 16:59:46.142] ubi0:animations is mounted. [2025-09-23 16:59:46.280] RTNETLINK answers: File exists [2025-09-23 16:59:46.280] ubi2:textures is mounted. [2025-09-23 16:59:46.281] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 16:59:46.281] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 16:59:46.281] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 16:59:46.281] ubi1:dml_code is mounted. [2025-09-23 16:59:46.281] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 16:59:46.281] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 16:59:46.281] data.LB_FadeInType0=100 [2025-09-23 16:59:46.281] data.CHLH_FadeInType0=0 [2025-09-23 16:59:46.281] data.WU_FadeInDelay=0 [2025-09-23 16:59:46.281] max_time_out=0 [2025-09-23 16:59:46.281] No splash screen [2025-09-23 16:59:46.281] stop dss Done [2025-09-23 16:59:46.281] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 16:59:46.281] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 16:59:46.302] /dev/mem opened. [2025-09-23 16:59:46.302] Memory mapped at address 0xffffac723000. [2025-09-23 16:59:46.302] Read at address 0x00600018 (0xffffac723018): 0x00000000 [2025-09-23 16:59:46.302] Write at address 0x00600018 (0xffffac723018): 0x00400040, readback 0x00400040 [2025-09-23 16:59:46.478] Loaded PowerVR consumer services. [2025-09-23 16:59:46.542] 512+0 records in [2025-09-23 16:59:46.542] 512+0 records out [2025-09-23 16:59:46.558] Waiting data available... [2025-09-23 16:59:46.590] Starting syslogd/klogd: done [2025-09-23 16:59:46.606] DML Start [2025-09-23 16:59:46.782] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 16:59:47.006] DML res1: 0 [2025-09-23 16:59:47.416] Read DML Algo certificate (mtd31) and save to file [2025-09-23 16:59:47.416] Read Success [2025-09-23 16:59:47.416] Verifying certificate... [2025-09-23 16:59:47.672] Verified OK [2025-09-23 16:59:47.688] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 16:59:49.449] Verified OK [2025-09-23 16:59:49.449] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 16:59:50.036] Verified OK [2025-09-23 16:59:50.036] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 16:59:52.738] fs.protected_hardlinks = 1 [2025-09-23 16:59:52.754] fs.protected_symlinks = 1 [2025-09-23 16:59:52.754] kernel.modules_disabled = 1 [2025-09-23 16:59:52.962] [2025-09-23 16:59:52.962] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 16:59:54.088] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:00:01.859] SBL1:1210.0.1.0 [2025-09-23 17:00:01.907] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:00:03.474] SBL2:1210.0.1.0 [2025-09-23 17:00:03.506] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:00:03.617] j-A [2025-09-23 17:00:10.971] The R5 Autosar Classic is running [2025-09-23 17:00:10.971] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:00:10.992] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:00:11.599] INIT: version 2.96 booting [2025-09-23 17:00:11.711] INIT: Entering runlevel: 5 [2025-09-23 17:00:11.871] mtd32 attached [2025-09-23 17:00:11.871] mtd28 attached [2025-09-23 17:00:11.887] mtd24 attached [2025-09-23 17:00:11.920] ubi0:dml_code is mounted. [2025-09-23 17:00:11.936] RTNETLINK answers: File exists [2025-09-23 17:00:11.990] ubi1:animations is mounted. [2025-09-23 17:00:11.991] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:00:11.991] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:00:11.991] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:00:11.991] ubi2:textures is mounted. [2025-09-23 17:00:11.991] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:00:11.991] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:00:11.991] data.LB_FadeInType0=100 [2025-09-23 17:00:11.991] data.CHLH_FadeInType0=0 [2025-09-23 17:00:11.991] data.WU_FadeInDelay=0 [2025-09-23 17:00:11.991] max_time_out=0 [2025-09-23 17:00:11.991] No splash screen [2025-09-23 17:00:11.991] stop dss Done [2025-09-23 17:00:12.066] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:00:12.066] /dev/mem opened. [2025-09-23 17:00:12.066] Memory mapped at address 0xffff86992000. [2025-09-23 17:00:12.066] Read at address 0x00600018 (0xffff86992018): 0x00000000 [2025-09-23 17:00:12.066] Write at address 0x00600018 (0xffff86992018): 0x00400040, readback 0x00400040 [2025-09-23 17:00:12.066] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:00:12.226] Loaded PowerVR consumer services. [2025-09-23 17:00:12.322] Waiting data available... [2025-09-23 17:00:12.322] 512+0 records in [2025-09-23 17:00:12.322] 512+0 records out [2025-09-23 17:00:12.370] Starting syslogd/klogd: done [2025-09-23 17:00:12.386] DML Start [2025-09-23 17:00:12.562] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:00:12.786] DML res1: 0 [2025-09-23 17:00:13.228] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:00:13.228] Read Success [2025-09-23 17:00:13.228] Verifying certificate... [2025-09-23 17:00:13.484] Verified OK [2025-09-23 17:00:13.500] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:00:15.131] Verified OK [2025-09-23 17:00:15.131] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:00:15.768] Verified OK [2025-09-23 17:00:15.768] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:00:18.454] fs.protected_hardlinks = 1 [2025-09-23 17:00:18.470] fs.protected_symlinks = 1 [2025-09-23 17:00:18.470] kernel.modules_disabled = 1 [2025-09-23 17:00:18.661] [2025-09-23 17:00:18.662] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:00:19.869] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:00:28.189] SBL1:1210.0.1.0 [2025-09-23 17:00:28.190] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:00:29.581] SBL2:1210.0.1.0 [2025-09-23 17:00:29.595] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:00:29.706] j-A [2025-09-23 17:00:37.059] The R5 Autosar Classic is running [2025-09-23 17:00:37.059] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:00:37.080] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:00:37.688] INIT: version 2.96 booting [2025-09-23 17:00:37.799] INIT: Entering runlevel: 5 [2025-09-23 17:00:37.943] mtd24 attached [2025-09-23 17:00:37.960] mtd32 attached [2025-09-23 17:00:37.976] mtd28 attached [2025-09-23 17:00:38.007] ubi0:textures is mounted. [2025-09-23 17:00:38.129] RTNETLINK answers: File exists [2025-09-23 17:00:38.129] ubi1:dml_code is mounted. [2025-09-23 17:00:38.130] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:00:38.130] ubi2:animations is mounted. [2025-09-23 17:00:38.130] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:00:38.130] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:00:38.130] data.LB_FadeInType0=100 [2025-09-23 17:00:38.130] data.CHLH_FadeInType0=0 [2025-09-23 17:00:38.130] data.WU_FadeInDelay=0 [2025-09-23 17:00:38.130] max_time_out=0 [2025-09-23 17:00:38.130] No splash screen [2025-09-23 17:00:38.130] stop dss Done [2025-09-23 17:00:38.130] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:00:38.130] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:00:38.147] /dev/mem opened. [2025-09-23 17:00:38.147] Memory mapped at address 0xffffab957000. [2025-09-23 17:00:38.147] Read at address 0x00600018 (0xffffab957018): 0x00000000 [2025-09-23 17:00:38.147] Write at address 0x00600018 (0xffffab957018): 0x00400040, readback 0x00400040 [2025-09-23 17:00:38.179] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:00:38.195] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:00:38.386] Loaded PowerVR consumer services. [2025-09-23 17:00:38.428] Waiting data available... [2025-09-23 17:00:38.428] 512+0 records in [2025-09-23 17:00:38.428] 512+0 records out [2025-09-23 17:00:38.444] Starting syslogd/klogd: done [2025-09-23 17:00:38.460] DML Start [2025-09-23 17:00:38.636] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:00:39.129] DML res1: 0 [2025-09-23 17:00:39.275] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:00:39.275] Read Success [2025-09-23 17:00:39.275] Verifying certificate... [2025-09-23 17:00:39.499] Verified OK [2025-09-23 17:00:39.514] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:00:41.190] Verified OK [2025-09-23 17:00:41.190] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:00:41.782] Verified OK [2025-09-23 17:00:41.782] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:00:44.500] fs.protected_hardlinks = 1 [2025-09-23 17:00:44.515] fs.protected_symlinks = 1 [2025-09-23 17:00:44.515] kernel.modules_disabled = 1 [2025-09-23 17:00:44.723] [2025-09-23 17:00:44.723] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:00:46.006] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:00:54.007] SBL1:1210.0.1.0 [2025-09-23 17:00:54.055] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:00:55.621] SBL2:1210.0.1.0 [2025-09-23 17:00:55.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:00:55.765] j-A [2025-09-23 17:01:03.136] The R5 Autosar Classic is running [2025-09-23 17:01:03.136] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:01:03.139] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:01:03.747] INIT: version 2.96 booting [2025-09-23 17:01:03.859] INIT: Entering runlevel: 5 [2025-09-23 17:01:04.019] mtd28 attached [2025-09-23 17:01:04.145] mtd32 attached [2025-09-23 17:01:04.145] mtd24 attached [2025-09-23 17:01:04.146] ubi0:animations is mounted. [2025-09-23 17:01:04.146] RTNETLINK answers: File exists [2025-09-23 17:01:04.146] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:01:04.146] ubi2:textures is mounted. [2025-09-23 17:01:04.146] ubi1:dml_code is mounted. [2025-09-23 17:01:04.146] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:01:04.146] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:01:04.146] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:01:04.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:01:04.146] data.LB_FadeInType0=100 [2025-09-23 17:01:04.146] data.CHLH_FadeInType0=0 [2025-09-23 17:01:04.146] data.WU_FadeInDelay=0 [2025-09-23 17:01:04.146] max_time_out=0 [2025-09-23 17:01:04.146] No splash screen [2025-09-23 17:01:04.146] stop dss Done [2025-09-23 17:01:04.207] /dev/mem opened. [2025-09-23 17:01:04.207] Memory mapped at address 0xffffb38e4000. [2025-09-23 17:01:04.242] Read at address 0x00600018 (0xffffb38e4018): 0x00000000 [2025-09-23 17:01:04.242] Write at address 0x00600018 (0xffffb38e4018): 0x00400040, readback 0x00400040 [2025-09-23 17:01:04.242] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:01:04.242] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:01:04.321] Loaded PowerVR consumer services. [2025-09-23 17:01:04.450] 512+0 records in [2025-09-23 17:01:04.450] 512+0 records out [2025-09-23 17:01:04.481] Waiting data available... [2025-09-23 17:01:04.497] Starting syslogd/klogd: done [2025-09-23 17:01:04.513] DML Start [2025-09-23 17:01:04.705] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:01:04.929] DML res1: 0 [2025-09-23 17:01:05.344] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:01:05.360] Read Success [2025-09-23 17:01:05.360] Verifying certificate... [2025-09-23 17:01:05.601] Verified OK [2025-09-23 17:01:05.617] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:01:07.278] Verified OK [2025-09-23 17:01:07.319] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:01:07.945] Verified OK [2025-09-23 17:01:07.945] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:01:10.647] fs.protected_hardlinks = 1 [2025-09-23 17:01:10.663] fs.protected_symlinks = 1 [2025-09-23 17:01:10.679] kernel.modules_disabled = 1 [2025-09-23 17:01:10.870] [2025-09-23 17:01:10.870] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:01:12.019] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:01:20.053] SBL1:1210.0.1.0 [2025-09-23 17:01:20.053] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:01:21.378] SBL2:1210.0.1.0 [2025-09-23 17:01:21.409] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:01:21.522] j-A [2025-09-23 17:01:28.914] The R5 Autosar Classic is running [2025-09-23 17:01:28.914] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:01:28.914] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:01:29.503] INIT: version 2.96 booting [2025-09-23 17:01:29.614] INIT: Entering runlevel: 5 [2025-09-23 17:01:29.774] mtd24 attached [2025-09-23 17:01:29.774] mtd28 attached [2025-09-23 17:01:29.927] mtd32 attached [2025-09-23 17:01:29.928] RTNETLINK answers: File exists [2025-09-23 17:01:29.928] ubi0:textures is mounted. [2025-09-23 17:01:29.928] ubi2:dml_code is mounted. [2025-09-23 17:01:29.928] ubi1:animations is mounted. [2025-09-23 17:01:29.928] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:01:29.928] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:01:29.928] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:01:29.928] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:01:29.928] data.LB_FadeInType0=100 [2025-09-23 17:01:29.928] data.CHLH_FadeInType0=0 [2025-09-23 17:01:29.928] data.WU_FadeInDelay=0 [2025-09-23 17:01:29.928] max_time_out=0 [2025-09-23 17:01:29.928] No splash screen [2025-09-23 17:01:29.928] stop dss Done [2025-09-23 17:01:29.928] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:01:29.952] /dev/mem opened. [2025-09-23 17:01:29.952] Memory mapped at address 0xffff8ff88000. [2025-09-23 17:01:29.989] Read at address 0x00600018 (0xffff8ff88018): 0x00000000 [2025-09-23 17:01:29.989] Write at address 0x00600018 (0xffff8ff88018): 0x00400040, readback 0x00400040 [2025-09-23 17:01:29.989] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:01:29.989] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:01:30.165] Loaded PowerVR consumer services. [2025-09-23 17:01:30.229] 512+0 records in [2025-09-23 17:01:30.229] 512+0 records out [2025-09-23 17:01:30.245] Waiting data available... [2025-09-23 17:01:30.245] Starting syslogd/klogd: done [2025-09-23 17:01:30.261] DML Start [2025-09-23 17:01:30.437] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:01:30.661] DML res1: 0 [2025-09-23 17:01:31.130] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:01:31.130] Read Success [2025-09-23 17:01:31.130] Verifying certificate... [2025-09-23 17:01:31.386] Verified OK [2025-09-23 17:01:31.401] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:01:32.945] Verified OK [2025-09-23 17:01:32.945] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:01:33.541] Verified OK [2025-09-23 17:01:33.541] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:01:36.403] fs.protected_hardlinks = 1 [2025-09-23 17:01:36.403] fs.protected_symlinks = 1 [2025-09-23 17:01:36.403] kernel.modules_disabled = 1 [2025-09-23 17:01:36.610] [2025-09-23 17:01:36.610] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:01:37.778] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:01:45.897] SBL1:1210.0.1.0 [2025-09-23 17:01:45.945] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:01:47.511] SBL2:1210.0.1.0 [2025-09-23 17:01:47.543] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:01:47.655] j-A [2025-09-23 17:01:55.028] The R5 Autosar Classic is running [2025-09-23 17:01:55.028] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:01:55.028] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:01:55.635] INIT: version 2.96 booting [2025-09-23 17:01:55.748] INIT: Entering runlevel: 5 [2025-09-23 17:01:56.067] mtd24 attached [2025-09-23 17:01:56.067] mtd28 attached [2025-09-23 17:01:56.067] mtd32 attached [2025-09-23 17:01:56.067] RTNETLINK answers: File exists [2025-09-23 17:01:56.067] ubi1:animations is mounted. [2025-09-23 17:01:56.067] ubi2:dml_code is mounted. [2025-09-23 17:01:56.067] ubi0:textures is mounted. [2025-09-23 17:01:56.067] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:01:56.067] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:01:56.067] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:01:56.068] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:01:56.068] data.LB_FadeInType0=100 [2025-09-23 17:01:56.068] data.CHLH_FadeInType0=0 [2025-09-23 17:01:56.068] data.WU_FadeInDelay=0 [2025-09-23 17:01:56.068] max_time_out=0 [2025-09-23 17:01:56.068] No splash screen [2025-09-23 17:01:56.068] stop dss Done [2025-09-23 17:01:56.068] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:01:56.103] /dev/mem opened. [2025-09-23 17:01:56.103] Memory mapped at address 0xffffb7aff000. [2025-09-23 17:01:56.103] Read at address 0x00600018 (0xffffb7aff018): 0x00000000 [2025-09-23 17:01:56.103] Write at address 0x00600018 (0xffffb7aff018): 0x00400040, readback 0x00400040 [2025-09-23 17:01:56.129] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:01:56.129] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:01:56.193] Loaded PowerVR consumer services. [2025-09-23 17:01:56.321] 512+0 records in [2025-09-23 17:01:56.337] 512+0 records out [2025-09-23 17:01:56.353] Waiting data available... [2025-09-23 17:01:56.385] Starting syslogd/klogd: done [2025-09-23 17:01:56.401] DML Start [2025-09-23 17:01:56.576] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:01:56.816] DML res1: 0 [2025-09-23 17:01:57.238] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:01:57.238] Read Success [2025-09-23 17:01:57.238] Verifying certificate... [2025-09-23 17:01:57.494] Verified OK [2025-09-23 17:01:57.510] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:01:59.348] Verified OK [2025-09-23 17:01:59.348] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:01:59.939] Verified OK [2025-09-23 17:01:59.939] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:02:02.436] fs.protected_hardlinks = 1 [2025-09-23 17:02:02.437] fs.protected_symlinks = 1 [2025-09-23 17:02:02.437] kernel.modules_disabled = 1 [2025-09-23 17:02:02.641] [2025-09-23 17:02:02.641] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:02:03.912] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:02:11.686] SBL1:1210.0.1.0 [2025-09-23 17:02:11.718] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:02:13.301] SBL2:1210.0.1.0 [2025-09-23 17:02:13.333] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:02:13.444] j-A [2025-09-23 17:02:20.814] The R5 Autosar Classic is running [2025-09-23 17:02:20.814] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:02:20.814] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:02:21.422] INIT: version 2.96 booting [2025-09-23 17:02:21.533] INIT: Entering runlevel: 5 [2025-09-23 17:02:21.865] mtd24 attached [2025-09-23 17:02:21.865] mtd32 attached [2025-09-23 17:02:21.865] mtd28 attached [2025-09-23 17:02:21.865] ubi0:textures is mounted. [2025-09-23 17:02:21.865] RTNETLINK answers: File exists [2025-09-23 17:02:21.865] ubi1:dml_code is mounted. [2025-09-23 17:02:21.865] ubi2:animations is mounted. [2025-09-23 17:02:21.865] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:02:21.865] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:02:21.865] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:02:21.865] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:02:21.865] data.LB_FadeInType0=100 [2025-09-23 17:02:21.865] data.CHLH_FadeInType0=0 [2025-09-23 17:02:21.865] data.WU_FadeInDelay=0 [2025-09-23 17:02:21.865] max_time_out=0 [2025-09-23 17:02:21.865] No splash screen [2025-09-23 17:02:21.865] stop dss Done [2025-09-23 17:02:21.865] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:02:21.888] /dev/mem opened. [2025-09-23 17:02:21.888] Memory mapped at address 0xffffb5486000. [2025-09-23 17:02:21.888] Read at address 0x00600018 (0xffffb5486018): 0x00000000 [2025-09-23 17:02:21.888] Write at address 0x00600018 (0xffffb5486018): 0x00400040, readback 0x00400040 [2025-09-23 17:02:21.904] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:02:21.921] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:02:22.016] Loaded PowerVR consumer services. [2025-09-23 17:02:22.153] Waiting data available... [2025-09-23 17:02:22.153] 512+0 records in [2025-09-23 17:02:22.153] 512+0 records out [2025-09-23 17:02:22.185] Starting syslogd/klogd: done [2025-09-23 17:02:22.201] DML Start [2025-09-23 17:02:22.377] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:02:22.865] DML res1: 0 [2025-09-23 17:02:23.102] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:02:23.102] Read Success [2025-09-23 17:02:23.102] Verifying certificate... [2025-09-23 17:02:23.342] Verified OK [2025-09-23 17:02:23.358] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:02:25.030] Verified OK [2025-09-23 17:02:25.030] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:02:25.589] Verified OK [2025-09-23 17:02:25.605] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:02:28.354] fs.protected_hardlinks = 1 [2025-09-23 17:02:28.370] fs.protected_symlinks = 1 [2025-09-23 17:02:28.386] kernel.modules_disabled = 1 [2025-09-23 17:02:28.578] [2025-09-23 17:02:28.578] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:02:29.709] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:02:37.433] SBL1:1210.0.1.0 [2025-09-23 17:02:37.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:02:39.047] SBL2:1210.0.1.0 [2025-09-23 17:02:39.079] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:02:39.191] j-A [2025-09-23 17:02:46.563] The R5 Autosar Classic is running [2025-09-23 17:02:46.563] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:02:46.563] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:02:47.170] INIT: version 2.96 booting [2025-09-23 17:02:47.282] INIT: Entering runlevel: 5 [2025-09-23 17:02:47.599] mtd32 attached [2025-09-23 17:02:47.599] mtd24 attached [2025-09-23 17:02:47.599] mtd28 attached [2025-09-23 17:02:47.599] RTNETLINK answers: File exists [2025-09-23 17:02:47.599] ubi0:dml_code is mounted. [2025-09-23 17:02:47.599] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:02:47.599] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:02:47.599] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:02:47.599] ubi1:textures is mounted. [2025-09-23 17:02:47.599] ubi2:animations is mounted. [2025-09-23 17:02:47.599] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:02:47.599] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:02:47.599] data.LB_FadeInType0=100 [2025-09-23 17:02:47.599] data.CHLH_FadeInType0=0 [2025-09-23 17:02:47.599] data.WU_FadeInDelay=0 [2025-09-23 17:02:47.599] max_time_out=0 [2025-09-23 17:02:47.599] No splash screen [2025-09-23 17:02:47.599] stop dss Done [2025-09-23 17:02:47.599] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:02:47.599] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:02:47.625] /dev/mem opened. [2025-09-23 17:02:47.625] Memory mapped at address 0xffff93a5b000. [2025-09-23 17:02:47.651] Read at address 0x00600018 (0xffff93a5b018): 0x00000000 [2025-09-23 17:02:47.651] Write at address 0x00600018 (0xffff93a5b018): 0x00400040, readback 0x00400040 [2025-09-23 17:02:47.715] Loaded PowerVR consumer services. [2025-09-23 17:02:47.860] 512+0 records in [2025-09-23 17:02:47.876] 512+0 records out [2025-09-23 17:02:47.876] Waiting data available... [2025-09-23 17:02:47.908] Starting syslogd/klogd: done [2025-09-23 17:02:47.939] DML Start [2025-09-23 17:02:48.148] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:02:48.371] DML res1: 0 [2025-09-23 17:02:48.769] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:02:48.769] Read Success [2025-09-23 17:02:48.769] Verifying certificate... [2025-09-23 17:02:48.994] Verified OK [2025-09-23 17:02:49.009] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:02:50.640] Verified OK [2025-09-23 17:02:50.640] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:02:51.199] Verified OK [2025-09-23 17:02:51.199] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:02:54.029] fs.protected_hardlinks = 1 [2025-09-23 17:02:54.045] fs.protected_symlinks = 1 [2025-09-23 17:02:54.045] kernel.modules_disabled = 1 [2025-09-23 17:02:54.237] [2025-09-23 17:02:54.237] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:02:55.443] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:03:03.217] SBL1:1210.0.1.0 [2025-09-23 17:03:03.249] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:03:04.831] SBL2:1210.0.1.0 [2025-09-23 17:03:04.863] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:03:04.975] j-A [2025-09-23 17:03:12.345] The R5 Autosar Classic is running [2025-09-23 17:03:12.345] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:03:12.345] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:03:12.952] INIT: version 2.96 booting [2025-09-23 17:03:13.065] INIT: Entering runlevel: 5 [2025-09-23 17:03:13.397] mtd24 attached [2025-09-23 17:03:13.397] mtd32 attached [2025-09-23 17:03:13.397] mtd28 attached [2025-09-23 17:03:13.397] ubi0:textures is mounted. [2025-09-23 17:03:13.397] RTNETLINK answers: File exists [2025-09-23 17:03:13.397] ubi1:dml_code is mounted. [2025-09-23 17:03:13.397] ubi2:animations is mounted. [2025-09-23 17:03:13.397] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:03:13.397] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:03:13.397] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:03:13.397] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:03:13.397] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:03:13.397] data.LB_FadeInType0=100 [2025-09-23 17:03:13.397] data.CHLH_FadeInType0=0 [2025-09-23 17:03:13.397] data.WU_FadeInDelay=0 [2025-09-23 17:03:13.397] max_time_out=0 [2025-09-23 17:03:13.397] No splash screen [2025-09-23 17:03:13.397] stop dss Done [2025-09-23 17:03:13.398] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:03:13.398] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:03:13.432] /dev/mem opened. [2025-09-23 17:03:13.432] Memory mapped at address 0xffff8cb19000. [2025-09-23 17:03:13.432] Read at address 0x00600018 (0xffff8cb19018): 0x00000000 [2025-09-23 17:03:13.432] Write at address 0x00600018 (0xffff8cb19018): 0x00400040, readback 0x00400040 [2025-09-23 17:03:13.672] Loaded PowerVR consumer services. [2025-09-23 17:03:13.672] Waiting data available... [2025-09-23 17:03:13.704] 512+0 records in [2025-09-23 17:03:13.704] 512+0 records out [2025-09-23 17:03:13.720] Starting syslogd/klogd: done [2025-09-23 17:03:13.736] DML Start [2025-09-23 17:03:13.896] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:03:14.397] DML res1: 0 [2025-09-23 17:03:14.662] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:03:14.662] Read Success [2025-09-23 17:03:14.662] Verifying certificate... [2025-09-23 17:03:14.934] Verified OK [2025-09-23 17:03:14.966] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:03:16.526] Verified OK [2025-09-23 17:03:16.526] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:03:17.102] Verified OK [2025-09-23 17:03:17.117] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:03:19.851] fs.protected_hardlinks = 1 [2025-09-23 17:03:19.867] fs.protected_symlinks = 1 [2025-09-23 17:03:19.867] kernel.modules_disabled = 1 [2025-09-23 17:03:20.059] [2025-09-23 17:03:20.059] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:03:21.240] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:03:28.961] SBL1:1210.0.1.0 [2025-09-23 17:03:29.009] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:03:30.592] SBL2:1210.0.1.0 [2025-09-23 17:03:30.633] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:03:30.719] j-A [2025-09-23 17:03:38.074] The R5 Autosar Classic is running [2025-09-23 17:03:38.099] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:03:38.099] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:03:38.707] INIT: version 2.96 booting [2025-09-23 17:03:38.818] INIT: Entering runlevel: 5 [2025-09-23 17:03:39.114] mtd24 attached [2025-09-23 17:03:39.114] mtd28 attached [2025-09-23 17:03:39.114] ubi0:textures is mounted. [2025-09-23 17:03:39.114] mtd32 attached [2025-09-23 17:03:39.114] ubi1:animations is mounted. [2025-09-23 17:03:39.114] RTNETLINK answers: File exists [2025-09-23 17:03:39.114] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:03:39.114] ubi2:dml_code is mounted. [2025-09-23 17:03:39.114] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:03:39.114] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:03:39.114] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:03:39.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:03:39.114] data.LB_FadeInType0=100 [2025-09-23 17:03:39.114] data.CHLH_FadeInType0=0 [2025-09-23 17:03:39.114] data.WU_FadeInDelay=0 [2025-09-23 17:03:39.114] max_time_out=0 [2025-09-23 17:03:39.114] No splash screen [2025-09-23 17:03:39.114] stop dss Done [2025-09-23 17:03:39.187] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:03:39.187] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:03:39.187] /dev/mem opened. [2025-09-23 17:03:39.187] Memory mapped at address 0xffff89f69000. [2025-09-23 17:03:39.187] Read at address 0x00600018 (0xffff89f69018): 0x00000000 [2025-09-23 17:03:39.187] Write at address 0x00600018 (0xffff89f69018): 0x00400040, readback 0x00400040 [2025-09-23 17:03:39.299] Loaded PowerVR consumer services. [2025-09-23 17:03:39.412] 512+0 records in [2025-09-23 17:03:39.412] 512+0 records out [2025-09-23 17:03:39.443] Waiting data available... [2025-09-23 17:03:39.459] Starting syslogd/klogd: done [2025-09-23 17:03:39.491] DML Start [2025-09-23 17:03:39.636] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:03:39.859] DML res1: 0 [2025-09-23 17:03:40.322] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:03:40.338] Read Success [2025-09-23 17:03:40.338] Verifying certificate... [2025-09-23 17:03:40.611] Verified OK [2025-09-23 17:03:40.627] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:03:42.241] Verified OK [2025-09-23 17:03:42.241] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:03:42.831] Verified OK [2025-09-23 17:03:42.831] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:03:45.388] fs.protected_hardlinks = 1 [2025-09-23 17:03:45.388] fs.protected_symlinks = 1 [2025-09-23 17:03:45.414] kernel.modules_disabled = 1 [2025-09-23 17:03:45.596] [2025-09-23 17:03:45.596] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:03:46.904] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:03:54.732] SBL1:1210.0.1.0 [2025-09-23 17:03:54.780] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:03:56.348] SBL2:1210.0.1.0 [2025-09-23 17:03:56.383] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:03:56.491] j-A [2025-09-23 17:04:03.845] The R5 Autosar Classic is running [2025-09-23 17:04:03.845] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:04:03.866] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:04:04.474] INIT: version 2.96 booting [2025-09-23 17:04:04.897] INIT: Entering runlevel: 5 [2025-09-23 17:04:04.897] mtd24 attached [2025-09-23 17:04:04.897] mtd32 attached [2025-09-23 17:04:04.897] mtd28 attached [2025-09-23 17:04:04.897] ubi0:textures is mounted. [2025-09-23 17:04:04.897] RTNETLINK answers: File exists [2025-09-23 17:04:04.897] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:04:04.897] ubi2:animations is mounted. [2025-09-23 17:04:04.897] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:04:04.897] ubi1:dml_code is mounted. [2025-09-23 17:04:04.897] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:04:04.897] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:04:04.897] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:04:04.897] data.LB_FadeInType0=100 [2025-09-23 17:04:04.897] data.CHLH_FadeInType0=0 [2025-09-23 17:04:04.897] data.WU_FadeInDelay=0 [2025-09-23 17:04:04.897] max_time_out=0 [2025-09-23 17:04:04.897] No splash screen [2025-09-23 17:04:04.897] stop dss Done [2025-09-23 17:04:04.897] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:04:04.897] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:04:04.946] /dev/mem opened. [2025-09-23 17:04:04.946] Memory mapped at address 0xffff96e04000. [2025-09-23 17:04:04.946] Read at address 0x00600018 (0xffff96e04018): 0x00000000 [2025-09-23 17:04:04.946] Write at address 0x00600018 (0xffff96e04018): 0x00400040, readback 0x00400040 [2025-09-23 17:04:05.026] Loaded PowerVR consumer services. [2025-09-23 17:04:05.169] Waiting data available... [2025-09-23 17:04:05.169] 512+0 records in [2025-09-23 17:04:05.169] 512+0 records out [2025-09-23 17:04:05.202] Starting syslogd/klogd: done [2025-09-23 17:04:05.218] DML Start [2025-09-23 17:04:05.393] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:04:05.649] DML res1: 0 [2025-09-23 17:04:06.048] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:04:06.048] Read Success [2025-09-23 17:04:06.048] Verifying certificate... [2025-09-23 17:04:06.320] Verified OK [2025-09-23 17:04:06.336] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:04:07.945] Verified OK [2025-09-23 17:04:07.945] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:04:08.595] Verified OK [2025-09-23 17:04:08.595] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:04:11.328] fs.protected_hardlinks = 1 [2025-09-23 17:04:11.328] fs.protected_symlinks = 1 [2025-09-23 17:04:11.344] kernel.modules_disabled = 1 [2025-09-23 17:04:11.536] [2025-09-23 17:04:11.536] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:04:12.719] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:04:20.503] SBL1:1210.0.1.0 [2025-09-23 17:04:20.551] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:04:22.117] SBL2:1210.0.1.0 [2025-09-23 17:04:22.166] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:04:22.262] j-A [2025-09-23 17:04:29.616] The R5 Autosar Classic is running [2025-09-23 17:04:29.641] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:04:29.641] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:04:30.248] INIT: version 2.96 booting [2025-09-23 17:04:30.361] INIT: Entering runlevel: 5 [2025-09-23 17:04:30.505] mtd24 attached [2025-09-23 17:04:30.521] mtd28 attached [2025-09-23 17:04:30.537] mtd32 attached [2025-09-23 17:04:30.585] ubi0:textures is mounted. [2025-09-23 17:04:30.585] RTNETLINK answers: File exists [2025-09-23 17:04:30.649] ubi1:animations is mounted. [2025-09-23 17:04:30.649] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:04:30.650] ubi2:dml_code is mounted. [2025-09-23 17:04:30.650] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:04:30.650] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:04:30.650] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:04:30.650] data.LB_FadeInType0=100 [2025-09-23 17:04:30.650] data.CHLH_FadeInType0=0 [2025-09-23 17:04:30.650] data.WU_FadeInDelay=0 [2025-09-23 17:04:30.650] max_time_out=0 [2025-09-23 17:04:30.650] No splash screen [2025-09-23 17:04:30.650] stop dss Done [2025-09-23 17:04:30.650] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:04:30.713] /dev/mem opened. [2025-09-23 17:04:30.713] Memory mapped at address 0xffff9059f000. [2025-09-23 17:04:30.713] Read at address 0x00600018 (0xffff9059f018): 0x00000000 [2025-09-23 17:04:30.713] Write at address 0x00600018 (0xffff9059f018): 0x00400040, readback 0x00400040 [2025-09-23 17:04:30.773] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:04:30.773] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:04:30.853] Loaded PowerVR consumer services. [2025-09-23 17:04:30.988] Waiting data available... [2025-09-23 17:04:30.988] 512+0 records in [2025-09-23 17:04:30.988] 512+0 records out [2025-09-23 17:04:31.020] Starting syslogd/klogd: done [2025-09-23 17:04:31.052] DML Start [2025-09-23 17:04:31.244] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:04:31.452] DML res1: 0 [2025-09-23 17:04:31.921] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:04:31.921] Read Success [2025-09-23 17:04:31.921] Verifying certificate... [2025-09-23 17:04:32.176] Verified OK [2025-09-23 17:04:32.176] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:04:33.864] Verified OK [2025-09-23 17:04:33.864] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:04:34.548] Verified OK [2025-09-23 17:04:34.548] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:04:37.089] fs.protected_hardlinks = 1 [2025-09-23 17:04:37.105] fs.protected_symlinks = 1 [2025-09-23 17:04:37.105] kernel.modules_disabled = 1 [2025-09-23 17:04:37.297] [2025-09-23 17:04:37.297] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:04:38.557] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:04:46.273] SBL1:1210.0.1.0 [2025-09-23 17:04:46.321] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:04:47.888] SBL2:1210.0.1.0 [2025-09-23 17:04:47.936] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:04:48.032] j-A [2025-09-23 17:04:55.385] The R5 Autosar Classic is running [2025-09-23 17:04:55.410] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:04:55.410] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:04:56.018] INIT: version 2.96 booting [2025-09-23 17:04:56.413] INIT: Entering runlevel: 5 [2025-09-23 17:04:56.413] mtd32 attached [2025-09-23 17:04:56.413] mtd24 attached [2025-09-23 17:04:56.413] mtd28 attached [2025-09-23 17:04:56.413] ubi0:dml_code is mounted. [2025-09-23 17:04:56.413] RTNETLINK answers: File exists [2025-09-23 17:04:56.413] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:04:56.413] ubi2:animations is mounted. [2025-09-23 17:04:56.424] ubi1:textures is mounted. [2025-09-23 17:04:56.424] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:04:56.424] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:04:56.424] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:04:56.424] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:04:56.424] data.LB_FadeInType0=100 [2025-09-23 17:04:56.424] data.CHLH_FadeInType0=0 [2025-09-23 17:04:56.424] data.WU_FadeInDelay=0 [2025-09-23 17:04:56.424] max_time_out=0 [2025-09-23 17:04:56.424] No splash screen [2025-09-23 17:04:56.424] stop dss Done [2025-09-23 17:04:56.472] /dev/mem opened. [2025-09-23 17:04:56.509] Memory mapped at address 0xffff8e5de000. [2025-09-23 17:04:56.509] Read at address 0x00600018 (0xffff8e5de018): 0x00000000 [2025-09-23 17:04:56.509] Write at address 0x00600018 (0xffff8e5de018): 0x00400040, readback 0x00400040 [2025-09-23 17:04:56.509] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:04:56.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:04:56.701] Loaded PowerVR consumer services. [2025-09-23 17:04:56.749] Waiting data available... [2025-09-23 17:04:56.765] 512+0 records in [2025-09-23 17:04:56.765] 512+0 records out [2025-09-23 17:04:56.781] Starting syslogd/klogd: done [2025-09-23 17:04:56.797] DML Start [2025-09-23 17:04:56.973] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:04:57.181] DML res1: 0 [2025-09-23 17:04:57.691] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:04:57.691] Read Success [2025-09-23 17:04:57.691] Verifying certificate... [2025-09-23 17:04:57.960] Verified OK [2025-09-23 17:04:57.960] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:04:59.593] Verified OK [2025-09-23 17:04:59.609] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:05:00.183] Verified OK [2025-09-23 17:05:00.183] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:05:02.820] fs.protected_hardlinks = 1 [2025-09-23 17:05:02.852] fs.protected_symlinks = 1 [2025-09-23 17:05:02.852] kernel.modules_disabled = 1 [2025-09-23 17:05:03.040] [2025-09-23 17:05:03.040] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:05:04.278] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:05:12.037] SBL1:1210.0.1.0 [2025-09-23 17:05:12.069] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:05:13.652] SBL2:1210.0.1.0 [2025-09-23 17:05:13.696] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:05:13.796] j-A [2025-09-23 17:05:21.168] The R5 Autosar Classic is running [2025-09-23 17:05:21.168] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:05:21.168] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:05:21.775] INIT: version 2.96 booting [2025-09-23 17:05:21.887] INIT: Entering runlevel: 5 [2025-09-23 17:05:22.211] mtd32 attached [2025-09-23 17:05:22.211] mtd24 attached [2025-09-23 17:05:22.211] mtd28 attached [2025-09-23 17:05:22.211] ubi0:dml_code is mounted. [2025-09-23 17:05:22.211] RTNETLINK answers: File exists [2025-09-23 17:05:22.211] ubi2:animations is mounted. [2025-09-23 17:05:22.211] ubi1:textures is mounted. [2025-09-23 17:05:22.211] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:05:22.211] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:05:22.211] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:05:22.211] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:05:22.211] data.LB_FadeInType0=100 [2025-09-23 17:05:22.211] data.CHLH_FadeInType0=0 [2025-09-23 17:05:22.211] data.WU_FadeInDelay=0 [2025-09-23 17:05:22.211] max_time_out=0 [2025-09-23 17:05:22.211] No splash screen [2025-09-23 17:05:22.211] stop dss Done [2025-09-23 17:05:22.211] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:05:22.252] /dev/mem opened. [2025-09-23 17:05:22.252] Memory mapped at address 0xffffa0998000. [2025-09-23 17:05:22.252] Read at address 0x00600018 (0xffffa0998018): 0x00000000 [2025-09-23 17:05:22.252] Write at address 0x00600018 (0xffffa0998018): 0x00400040, readback 0x00400040 [2025-09-23 17:05:22.252] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:05:22.275] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:05:22.356] Loaded PowerVR consumer services. [2025-09-23 17:05:22.511] 512+0 records in [2025-09-23 17:05:22.511] 512+0 records out [2025-09-23 17:05:22.511] Waiting data available... [2025-09-23 17:05:22.527] Starting syslogd/klogd: done [2025-09-23 17:05:22.543] DML Start [2025-09-23 17:05:22.687] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:05:22.879] DML res1: 0 [2025-09-23 17:05:23.407] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:05:23.423] Read Success [2025-09-23 17:05:23.423] Verifying certificate... [2025-09-23 17:05:23.662] Verified OK [2025-09-23 17:05:23.662] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:05:25.280] Verified OK [2025-09-23 17:05:25.280] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:05:25.906] Verified OK [2025-09-23 17:05:25.906] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:05:28.528] fs.protected_hardlinks = 1 [2025-09-23 17:05:28.544] fs.protected_symlinks = 1 [2025-09-23 17:05:28.544] kernel.modules_disabled = 1 [2025-09-23 17:05:28.736] [2025-09-23 17:05:28.736] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:05:29.982] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:05:37.799] SBL1:1210.0.1.0 [2025-09-23 17:05:37.847] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:05:39.413] SBL2:1210.0.1.0 [2025-09-23 17:05:39.461] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 17:05:39.558] j-A [2025-09-23 17:05:46.911] The R5 Autosar Classic is running [2025-09-23 17:05:46.936] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:05:46.936] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:05:47.544] INIT: version 2.96 booting [2025-09-23 17:05:47.945] INIT: Entering runlevel: 5 [2025-09-23 17:05:47.945] mtd28 attached [2025-09-23 17:05:47.945] mtd24 attached [2025-09-23 17:05:47.945] mtd32 attached [2025-09-23 17:05:47.950] RTNETLINK answers: File exists [2025-09-23 17:05:47.950] ubi1:textures is mounted. [2025-09-23 17:05:47.950] ubi0:animations is mounted. [2025-09-23 17:05:47.950] ubi2:dml_code is mounted. [2025-09-23 17:05:47.950] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:05:47.950] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:05:47.950] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:05:47.950] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:05:47.950] data.LB_FadeInType0=100 [2025-09-23 17:05:47.950] data.CHLH_FadeInType0=0 [2025-09-23 17:05:47.950] data.WU_FadeInDelay=0 [2025-09-23 17:05:47.950] max_time_out=0 [2025-09-23 17:05:47.950] No splash screen [2025-09-23 17:05:47.950] stop dss Done [2025-09-23 17:05:47.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:05:48.026] /dev/mem opened. [2025-09-23 17:05:48.026] Memory mapped at address 0xffff8ef9f000. [2025-09-23 17:05:48.026] Read at address 0x00600018 (0xffff8ef9f018): 0x00000000 [2025-09-23 17:05:48.026] Write at address 0x00600018 (0xffff8ef9f018): 0x00400040, readback 0x00400040 [2025-09-23 17:05:48.026] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:05:48.026] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:05:48.122] Loaded PowerVR consumer services. [2025-09-23 17:05:48.250] 512+0 records in [2025-09-23 17:05:48.267] 512+0 records out [2025-09-23 17:05:48.267] Waiting data available... [2025-09-23 17:05:48.298] Starting syslogd/klogd: done [2025-09-23 17:05:48.330] DML Start [2025-09-23 17:05:48.523] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:05:48.961] DML res1: 0 [2025-09-23 17:05:49.177] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:05:49.199] Read Success [2025-09-23 17:05:49.199] Verifying certificate... [2025-09-23 17:05:49.455] Verified OK [2025-09-23 17:05:49.455] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:05:51.142] Verified OK [2025-09-23 17:05:51.142] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:05:51.790] Verified OK [2025-09-23 17:05:51.790] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:05:54.427] fs.protected_hardlinks = 1 [2025-09-23 17:05:54.427] fs.protected_symlinks = 1 [2025-09-23 17:05:54.443] kernel.modules_disabled = 1 [2025-09-23 17:05:54.619] [2025-09-23 17:05:54.619] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:05:55.818] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:06:03.568] SBL1:1210.0.1.0 [2025-09-23 17:06:03.600] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:06:05.183] SBL2:1210.0.1.0 [2025-09-23 17:06:05.228] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:06:05.327] j-A [2025-09-23 17:06:12.696] The R5 Autosar Classic is running [2025-09-23 17:06:12.696] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:06:12.696] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:06:13.303] INIT: version 2.96 booting [2025-09-23 17:06:13.415] INIT: Entering runlevel: 5 [2025-09-23 17:06:13.728] mtd24 attached [2025-09-23 17:06:13.728] mtd28 attached [2025-09-23 17:06:13.728] mtd32 attached [2025-09-23 17:06:13.728] ubi0:textures is mounted. [2025-09-23 17:06:13.728] RTNETLINK answers: File exists [2025-09-23 17:06:13.728] ubi1:animations is mounted. [2025-09-23 17:06:13.728] ubi2:dml_code is mounted. [2025-09-23 17:06:13.728] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:06:13.728] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:06:13.728] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:06:13.728] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:06:13.728] data.LB_FadeInType0=100 [2025-09-23 17:06:13.728] data.CHLH_FadeInType0=0 [2025-09-23 17:06:13.728] data.WU_FadeInDelay=0 [2025-09-23 17:06:13.728] max_time_out=0 [2025-09-23 17:06:13.728] No splash screen [2025-09-23 17:06:13.728] stop dss Done [2025-09-23 17:06:13.728] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:06:13.770] /dev/mem opened. [2025-09-23 17:06:13.770] Memory mapped at address 0xffff85a9e000. [2025-09-23 17:06:13.770] Read at address 0x00600018 (0xffff85a9e018): 0x00000000 [2025-09-23 17:06:13.770] Write at address 0x00600018 (0xffff85a9e018): 0x00400040, readback 0x00400040 [2025-09-23 17:06:13.770] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:06:13.786] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:06:13.865] Loaded PowerVR consumer services. [2025-09-23 17:06:14.032] Waiting data available... [2025-09-23 17:06:14.033] 512+0 records in [2025-09-23 17:06:14.033] 512+0 records out [2025-09-23 17:06:14.064] Starting syslogd/klogd: done [2025-09-23 17:06:14.080] DML Start [2025-09-23 17:06:14.257] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:06:14.512] DML res1: 0 [2025-09-23 17:06:14.938] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:06:14.938] Read Success [2025-09-23 17:06:14.938] Verifying certificate... [2025-09-23 17:06:15.177] Verified OK [2025-09-23 17:06:15.193] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:06:16.855] Verified OK [2025-09-23 17:06:16.855] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:06:17.494] Verified OK [2025-09-23 17:06:17.494] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:06:20.179] fs.protected_hardlinks = 1 [2025-09-23 17:06:20.179] fs.protected_symlinks = 1 [2025-09-23 17:06:20.194] kernel.modules_disabled = 1 [2025-09-23 17:06:20.371] [2025-09-23 17:06:20.371] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:06:21.584] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:06:29.290] SBL1:1210.0.1.0 [2025-09-23 17:06:29.338] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:06:30.920] SBL2:1210.0.1.0 [2025-09-23 17:06:30.952] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:06:31.064] j-A [2025-09-23 17:06:38.401] The R5 Autosar Classic is running [2025-09-23 17:06:38.432] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:06:38.432] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:06:39.040] INIT: version 2.96 booting [2025-09-23 17:06:39.151] INIT: Entering runlevel: 5 [2025-09-23 17:06:39.430] mtd32 attached [2025-09-23 17:06:39.430] mtd28 attached [2025-09-23 17:06:39.430] mtd24 attached [2025-09-23 17:06:39.430] ubi0:dml_code is mounted. [2025-09-23 17:06:39.430] RTNETLINK answers: File exists [2025-09-23 17:06:39.431] ubi1:animations is mounted. [2025-09-23 17:06:39.431] ubi2:textures is mounted. [2025-09-23 17:06:39.431] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:06:39.431] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:06:39.431] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:06:39.431] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:06:39.431] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:06:39.431] data.LB_FadeInType0=100 [2025-09-23 17:06:39.431] data.CHLH_FadeInType0=0 [2025-09-23 17:06:39.431] data.WU_FadeInDelay=0 [2025-09-23 17:06:39.431] max_time_out=0 [2025-09-23 17:06:39.431] No splash screen [2025-09-23 17:06:39.431] stop dss Done [2025-09-23 17:06:39.479] /dev/mem opened. [2025-09-23 17:06:39.505] Memory mapped at address 0xffff864e4000. [2025-09-23 17:06:39.505] Read at address 0x00600018 (0xffff864e4018): 0x00000000 [2025-09-23 17:06:39.505] Write at address 0x00600018 (0xffff864e4018): 0x00400040, readback 0x00400040 [2025-09-23 17:06:39.547] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:06:39.547] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:06:39.611] Loaded PowerVR consumer services. [2025-09-23 17:06:39.764] 512+0 records in [2025-09-23 17:06:39.764] 512+0 records out [2025-09-23 17:06:39.764] Waiting data available... [2025-09-23 17:06:39.796] Starting syslogd/klogd: done [2025-09-23 17:06:39.812] DML Start [2025-09-23 17:06:39.989] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:06:40.196] DML res1: 0 [2025-09-23 17:06:40.676] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:06:40.676] Read Success [2025-09-23 17:06:40.992] Verifying certificate... [2025-09-23 17:06:40.992] Verified OK [2025-09-23 17:06:40.992] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:06:42.618] Verified OK [2025-09-23 17:06:42.618] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:06:43.263] Verified OK [2025-09-23 17:06:43.263] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:06:45.964] fs.protected_hardlinks = 1 [2025-09-23 17:06:45.964] fs.protected_symlinks = 1 [2025-09-23 17:06:45.981] kernel.modules_disabled = 1 [2025-09-23 17:06:46.188] [2025-09-23 17:06:46.188] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:06:47.344] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:06:55.036] SBL1:1210.0.1.0 [2025-09-23 17:06:55.068] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:06:56.651] SBL2:1210.0.1.0 [2025-09-23 17:06:56.725] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:06:56.795] j-A [2025-09-23 17:07:04.132] The R5 Autosar Classic is running [2025-09-23 17:07:04.163] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:07:04.163] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:07:04.770] INIT: version 2.96 booting [2025-09-23 17:07:05.196] INIT: Entering runlevel: 5 [2025-09-23 17:07:05.197] mtd32 attached [2025-09-23 17:07:05.197] mtd28 attached [2025-09-23 17:07:05.197] mtd24 attached [2025-09-23 17:07:05.197] RTNETLINK answers: File exists [2025-09-23 17:07:05.197] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:07:05.197] ubi0:dml_code is mounted. [2025-09-23 17:07:05.197] ubi1:animations is mounted. [2025-09-23 17:07:05.197] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:07:05.197] ubi2:textures is mounted. [2025-09-23 17:07:05.197] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:07:05.197] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:07:05.197] data.LB_FadeInType0=100 [2025-09-23 17:07:05.197] data.CHLH_FadeInType0=0 [2025-09-23 17:07:05.197] data.WU_FadeInDelay=0 [2025-09-23 17:07:05.197] max_time_out=0 [2025-09-23 17:07:05.197] No splash screen [2025-09-23 17:07:05.197] stop dss Done [2025-09-23 17:07:05.197] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:07:05.236] /dev/mem opened. [2025-09-23 17:07:05.236] Memory mapped at address 0xffff82102000. [2025-09-23 17:07:05.236] Read at address 0x00600018 (0xffff82102018): 0x00000000 [2025-09-23 17:07:05.236] Write at address 0x00600018 (0xffff82102018): 0x00400040, readback 0x00400040 [2025-09-23 17:07:05.252] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:07:05.268] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:07:05.444] Loaded PowerVR consumer services. [2025-09-23 17:07:05.492] 512+0 records in [2025-09-23 17:07:05.492] 512+0 records out [2025-09-23 17:07:05.508] Waiting data available... [2025-09-23 17:07:05.524] Starting syslogd/klogd: done [2025-09-23 17:07:05.540] DML Start [2025-09-23 17:07:05.732] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:07:05.908] DML res1: 0 [2025-09-23 17:07:06.416] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:07:06.416] Read Success [2025-09-23 17:07:06.416] Verifying certificate... [2025-09-23 17:07:06.655] Verified OK [2025-09-23 17:07:06.671] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:07:08.334] Verified OK [2025-09-23 17:07:08.334] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:07:08.966] Verified OK [2025-09-23 17:07:08.966] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:07:11.702] fs.protected_hardlinks = 1 [2025-09-23 17:07:11.703] fs.protected_symlinks = 1 [2025-09-23 17:07:11.703] kernel.modules_disabled = 1 [2025-09-23 17:07:11.908] [2025-09-23 17:07:11.908] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:07:13.043] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:07:15.359] SBL1:1210.0.1.0 [2025-09-23 17:07:20.841] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:07:22.424] SBL2:1210.0.1.0 [2025-09-23 17:07:22.455] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:07:22.568] j-A [2025-09-23 17:07:29.941] The R5 Autosar Classic is running [2025-09-23 17:07:29.941] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:07:29.941] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:07:30.548] INIT: version 2.96 booting [2025-09-23 17:07:30.660] INIT: Entering runlevel: 5 [2025-09-23 17:07:30.978] mtd28 attached [2025-09-23 17:07:30.978] mtd24 attached [2025-09-23 17:07:30.978] mtd32 attached [2025-09-23 17:07:30.978] RTNETLINK answers: File exists [2025-09-23 17:07:30.978] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:07:30.978] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:07:30.978] ubi1:textures is mounted. [2025-09-23 17:07:30.978] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:07:30.978] ubi0:animations is mounted. [2025-09-23 17:07:30.978] ubi2:dml_code is mounted. [2025-09-23 17:07:30.978] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:07:30.978] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:07:30.978] data.LB_FadeInType0=100 [2025-09-23 17:07:30.978] data.CHLH_FadeInType0=0 [2025-09-23 17:07:30.978] data.WU_FadeInDelay=0 [2025-09-23 17:07:30.978] max_time_out=0 [2025-09-23 17:07:30.978] No splash screen [2025-09-23 17:07:30.978] stop dss Done [2025-09-23 17:07:30.978] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:07:31.015] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:07:31.015] /dev/mem opened. [2025-09-23 17:07:31.015] Memory mapped at address 0xffff9f95b000. [2025-09-23 17:07:31.015] Read at address 0x00600018 (0xffff9f95b018): 0x00000000 [2025-09-23 17:07:31.015] Write at address 0x00600018 (0xffff9f95b018): 0x00400040, readback 0x00400040 [2025-09-23 17:07:31.223] Loaded PowerVR consumer services. [2025-09-23 17:07:31.239] 512+0 records in [2025-09-23 17:07:31.255] 512+0 records out [2025-09-23 17:07:31.287] Waiting data available... [2025-09-23 17:07:31.303] Starting syslogd/klogd: done [2025-09-23 17:07:31.319] DML Start [2025-09-23 17:07:31.463] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:07:31.687] DML res1: 0 [2025-09-23 17:07:32.149] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:07:32.149] Read Success [2025-09-23 17:07:32.149] Verifying certificate... [2025-09-23 17:07:32.374] Verified OK [2025-09-23 17:07:32.390] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:07:34.074] Verified OK [2025-09-23 17:07:34.074] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:07:34.729] Verified OK [2025-09-23 17:07:34.729] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:07:37.399] fs.protected_hardlinks = 1 [2025-09-23 17:07:37.399] fs.protected_symlinks = 1 [2025-09-23 17:07:37.399] kernel.modules_disabled = 1 [2025-09-23 17:07:37.590] [2025-09-23 17:07:37.590] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:07:38.853] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:07:46.588] SBL1:1210.0.1.0 [2025-09-23 17:07:46.620] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:07:48.203] SBL2:1210.0.1.0 [2025-09-23 17:07:48.493] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:07:48.493] j-A [2025-09-23 17:07:55.685] The R5 Autosar Classic is running [2025-09-23 17:07:55.716] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:07:55.716] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:07:56.323] INIT: version 2.96 booting [2025-09-23 17:07:56.435] INIT: Entering runlevel: 5 [2025-09-23 17:07:56.579] mtd24 attached [2025-09-23 17:07:56.595] mtd28 attached [2025-09-23 17:07:56.611] mtd32 attached [2025-09-23 17:07:56.659] ubi0:textures is mounted. [2025-09-23 17:07:56.659] RTNETLINK answers: File exists [2025-09-23 17:07:56.721] ubi1:animations is mounted. [2025-09-23 17:07:56.721] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:07:56.721] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:07:56.721] ubi2:dml_code is mounted. [2025-09-23 17:07:56.721] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:07:56.721] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:07:56.721] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:07:56.721] data.LB_FadeInType0=100 [2025-09-23 17:07:56.721] data.CHLH_FadeInType0=0 [2025-09-23 17:07:56.721] data.WU_FadeInDelay=0 [2025-09-23 17:07:56.721] max_time_out=0 [2025-09-23 17:07:56.721] No splash screen [2025-09-23 17:07:56.721] stop dss Done [2025-09-23 17:07:56.768] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:07:56.800] /dev/mem opened. [2025-09-23 17:07:56.800] Memory mapped at address 0xffffa1a7d000. [2025-09-23 17:07:56.800] Read at address 0x00600018 (0xffffa1a7d018): 0x00000000 [2025-09-23 17:07:56.800] Write at address 0x00600018 (0xffffa1a7d018): 0x00400040, readback 0x00400040 [2025-09-23 17:07:56.800] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:07:57.025] Loaded PowerVR consumer services. [2025-09-23 17:07:57.073] 512+0 records in [2025-09-23 17:07:57.073] 512+0 records out [2025-09-23 17:07:57.089] Waiting data available... [2025-09-23 17:07:57.104] Starting syslogd/klogd: done [2025-09-23 17:07:57.120] DML Start [2025-09-23 17:07:57.296] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:07:57.504] DML res1: 0 [2025-09-23 17:07:57.981] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:07:57.981] Read Success [2025-09-23 17:07:57.981] Verifying certificate... [2025-09-23 17:07:58.204] Verified OK [2025-09-23 17:07:58.204] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:07:59.915] Verified OK [2025-09-23 17:07:59.931] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:08:00.576] Verified OK [2025-09-23 17:08:00.576] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:08:03.262] fs.protected_hardlinks = 1 [2025-09-23 17:08:03.262] fs.protected_symlinks = 1 [2025-09-23 17:08:03.278] kernel.modules_disabled = 1 [2025-09-23 17:08:03.930] [2025-09-23 17:08:03.930] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:08:04.628] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:08:12.355] SBL1:1210.0.1.0 [2025-09-23 17:08:12.403] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:08:13.985] SBL2:1210.0.1.0 [2025-09-23 17:08:14.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:08:14.129] j-A [2025-09-23 17:08:21.467] The R5 Autosar Classic is running [2025-09-23 17:08:21.497] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:08:21.497] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:08:22.105] INIT: version 2.96 booting [2025-09-23 17:08:22.217] INIT: Entering runlevel: 5 [2025-09-23 17:08:22.525] mtd32 attached [2025-09-23 17:08:22.526] mtd28 attached [2025-09-23 17:08:22.526] mtd24 attached [2025-09-23 17:08:22.526] RTNETLINK answers: File exists [2025-09-23 17:08:22.526] ubi1:animations is mounted. [2025-09-23 17:08:22.526] ubi0:dml_code is mounted. [2025-09-23 17:08:22.526] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:08:22.526] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:08:22.526] ubi2:textures is mounted. [2025-09-23 17:08:22.526] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:08:22.526] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:08:22.526] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:08:22.526] data.LB_FadeInType0=100 [2025-09-23 17:08:22.526] data.CHLH_FadeInType0=0 [2025-09-23 17:08:22.526] data.WU_FadeInDelay=0 [2025-09-23 17:08:22.526] max_time_out=0 [2025-09-23 17:08:22.526] No splash screen [2025-09-23 17:08:22.526] stop dss Done [2025-09-23 17:08:22.536] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:08:22.552] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:08:22.587] /dev/mem opened. [2025-09-23 17:08:22.587] Memory mapped at address 0xffffaf88e000. [2025-09-23 17:08:22.587] Read at address 0x00600018 (0xffffaf88e018): 0x00000000 [2025-09-23 17:08:22.587] Write at address 0x00600018 (0xffffaf88e018): 0x00400040, readback 0x00400040 [2025-09-23 17:08:22.699] Loaded PowerVR consumer services. [2025-09-23 17:08:22.840] Waiting data available... [2025-09-23 17:08:22.840] 512+0 records in [2025-09-23 17:08:22.840] 512+0 records out [2025-09-23 17:08:22.856] Starting syslogd/klogd: done [2025-09-23 17:08:22.872] DML Start [2025-09-23 17:08:23.080] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:08:23.304] DML res1: 0 [2025-09-23 17:08:23.671] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:08:23.694] Read Success [2025-09-23 17:08:23.694] Verifying certificate... [2025-09-23 17:08:23.950] Verified OK [2025-09-23 17:08:23.966] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:08:25.564] Verified OK [2025-09-23 17:08:25.564] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:08:26.167] Verified OK [2025-09-23 17:08:26.167] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:08:28.901] fs.protected_hardlinks = 1 [2025-09-23 17:08:28.917] fs.protected_symlinks = 1 [2025-09-23 17:08:28.917] kernel.modules_disabled = 1 [2025-09-23 17:08:29.109] [2025-09-23 17:08:29.109] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:08:30.397] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:08:38.114] SBL1:1210.0.1.0 [2025-09-23 17:08:38.162] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:08:39.729] SBL2:1210.0.1.0 [2025-09-23 17:08:39.777] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:08:39.873] j-A [2025-09-23 17:08:47.227] The R5 Autosar Classic is running [2025-09-23 17:08:47.249] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:08:47.249] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:08:47.857] INIT: version 2.96 booting [2025-09-23 17:08:47.968] INIT: Entering runlevel: 5 [2025-09-23 17:08:48.128] mtd32 attached [2025-09-23 17:08:48.128] mtd24 attached [2025-09-23 17:08:48.160] mtd28 attached [2025-09-23 17:08:48.176] ubi0:dml_code is mounted. [2025-09-23 17:08:48.192] RTNETLINK answers: File exists [2025-09-23 17:08:48.246] ubi1:textures is mounted. [2025-09-23 17:08:48.246] ubi2:animations is mounted. [2025-09-23 17:08:48.246] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:08:48.246] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:08:48.246] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:08:48.246] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:08:48.246] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:08:48.246] data.LB_FadeInType0=100 [2025-09-23 17:08:48.246] data.CHLH_FadeInType0=0 [2025-09-23 17:08:48.246] data.WU_FadeInDelay=0 [2025-09-23 17:08:48.246] max_time_out=0 [2025-09-23 17:08:48.246] No splash screen [2025-09-23 17:08:48.246] stop dss Done [2025-09-23 17:08:48.294] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:08:48.325] /dev/mem opened. [2025-09-23 17:08:48.326] Memory mapped at address 0xffffa1603000. [2025-09-23 17:08:48.326] Read at address 0x00600018 (0xffffa1603018): 0x00000000 [2025-09-23 17:08:48.326] Write at address 0x00600018 (0xffffa1603018): 0x00400040, readback 0x00400040 [2025-09-23 17:08:48.326] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:08:48.486] Loaded PowerVR consumer services. [2025-09-23 17:08:48.566] 512+0 records in [2025-09-23 17:08:48.582] 512+0 records out [2025-09-23 17:08:48.582] Waiting data available... [2025-09-23 17:08:48.630] Starting syslogd/klogd: done [2025-09-23 17:08:48.646] DML Start [2025-09-23 17:08:48.837] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:08:49.078] DML res1: 0 [2025-09-23 17:08:49.506] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:08:49.506] Read Success [2025-09-23 17:08:49.506] Verifying certificate... [2025-09-23 17:08:49.762] Verified OK [2025-09-23 17:08:49.778] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:08:51.672] Verified OK [2025-09-23 17:08:51.672] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:08:52.179] Verified OK [2025-09-23 17:08:52.179] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:08:54.545] fs.protected_hardlinks = 1 [2025-09-23 17:08:54.561] fs.protected_symlinks = 1 [2025-09-23 17:08:54.577] kernel.modules_disabled = 1 [2025-09-23 17:08:54.769] [2025-09-23 17:08:54.769] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:08:56.156] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:09:03.892] SBL1:1210.0.1.0 [2025-09-23 17:09:03.924] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:09:05.507] SBL2:1210.0.1.0 [2025-09-23 17:09:05.543] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:09:05.650] j-A [2025-09-23 17:09:12.988] The R5 Autosar Classic is running [2025-09-23 17:09:13.019] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:09:13.019] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:09:13.626] INIT: version 2.96 booting [2025-09-23 17:09:13.738] INIT: Entering runlevel: 5 [2025-09-23 17:09:14.011] mtd28 attached [2025-09-23 17:09:14.011] mtd24 attached [2025-09-23 17:09:14.011] mtd32 attached [2025-09-23 17:09:14.011] ubi0:animations is mounted. [2025-09-23 17:09:14.011] RTNETLINK answers: File exists [2025-09-23 17:09:14.035] ubi1:textures is mounted. [2025-09-23 17:09:14.035] ubi2:dml_code is mounted. [2025-09-23 17:09:14.035] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:09:14.035] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:09:14.035] data.LB_FadeInType0=100 [2025-09-23 17:09:14.035] data.CHLH_FadeInType0=0 [2025-09-23 17:09:14.035] data.WU_FadeInDelay=0 [2025-09-23 17:09:14.035] max_time_out=0 [2025-09-23 17:09:14.035] No splash screen [2025-09-23 17:09:14.035] stop dss Done [2025-09-23 17:09:14.035] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:09:14.035] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:09:14.035] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:09:14.085] /dev/mem opened. [2025-09-23 17:09:14.085] Memory mapped at address 0xffff9f15f000. [2025-09-23 17:09:14.085] Read at address 0x00600018 (0xffff9f15f018): 0x00000000 [2025-09-23 17:09:14.085] Write at address 0x00600018 (0xffff9f15f018): 0x00400040, readback 0x00400040 [2025-09-23 17:09:14.143] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:09:14.143] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:09:14.207] Loaded PowerVR consumer services. [2025-09-23 17:09:14.334] 512+0 records in [2025-09-23 17:09:14.350] 512+0 records out [2025-09-23 17:09:14.350] Waiting data available... [2025-09-23 17:09:14.399] Starting syslogd/klogd: done [2025-09-23 17:09:14.415] DML Start [2025-09-23 17:09:14.591] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:09:14.782] DML res1: 0 [2025-09-23 17:09:15.260] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:09:15.260] Read Success [2025-09-23 17:09:15.260] Verifying certificate... [2025-09-23 17:09:15.468] Verified OK [2025-09-23 17:09:15.500] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:09:16.986] Verified OK [2025-09-23 17:09:16.986] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:09:17.625] Verified OK [2025-09-23 17:09:17.625] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:09:20.359] fs.protected_hardlinks = 1 [2025-09-23 17:09:20.359] fs.protected_symlinks = 1 [2025-09-23 17:09:20.375] kernel.modules_disabled = 1 [2025-09-23 17:09:20.567] [2025-09-23 17:09:20.567] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:09:21.875] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:09:29.673] SBL1:1210.0.1.0 [2025-09-23 17:09:29.705] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:09:31.287] SBL2:1210.0.1.0 [2025-09-23 17:09:31.324] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:09:31.431] j-A [2025-09-23 17:09:38.769] The R5 Autosar Classic is running [2025-09-23 17:09:38.800] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:09:38.800] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:09:39.408] INIT: version 2.96 booting [2025-09-23 17:09:39.520] INIT: Entering runlevel: 5 [2025-09-23 17:09:39.806] mtd32 attached [2025-09-23 17:09:39.806] mtd24 attached [2025-09-23 17:09:39.806] mtd28 attached [2025-09-23 17:09:39.806] ubi0:dml_code is mounted. [2025-09-23 17:09:39.806] RTNETLINK answers: File exists [2025-09-23 17:09:39.806] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:09:39.806] ubi1:textures is mounted. [2025-09-23 17:09:39.806] ubi2:animations is mounted. [2025-09-23 17:09:39.806] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:09:39.806] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:09:39.806] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:09:39.806] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:09:39.806] data.LB_FadeInType0=100 [2025-09-23 17:09:39.806] data.CHLH_FadeInType0=0 [2025-09-23 17:09:39.806] data.WU_FadeInDelay=0 [2025-09-23 17:09:39.806] max_time_out=0 [2025-09-23 17:09:39.806] No splash screen [2025-09-23 17:09:39.806] stop dss Done [2025-09-23 17:09:39.877] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:09:39.877] /dev/mem opened. [2025-09-23 17:09:39.877] Memory mapped at address 0xffff87973000. [2025-09-23 17:09:39.877] Read at address 0x00600018 (0xffff87973018): 0x00000000 [2025-09-23 17:09:39.877] Write at address 0x00600018 (0xffff87973018): 0x00400040, readback 0x00400040 [2025-09-23 17:09:39.877] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:09:40.117] Loaded PowerVR consumer services. [2025-09-23 17:09:40.177] Waiting data available... [2025-09-23 17:09:40.177] 512+0 records in [2025-09-23 17:09:40.177] 512+0 records out [2025-09-23 17:09:40.209] Starting syslogd/klogd: done [2025-09-23 17:09:40.226] DML Start [2025-09-23 17:09:40.385] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:09:40.657] DML res1: 0 [2025-09-23 17:09:41.084] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:09:41.084] Read Success [2025-09-23 17:09:41.084] Verifying certificate... [2025-09-23 17:09:41.339] Verified OK [2025-09-23 17:09:41.355] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:09:43.040] Verified OK [2025-09-23 17:09:43.040] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:09:43.632] Verified OK [2025-09-23 17:09:43.632] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:09:46.189] fs.protected_hardlinks = 1 [2025-09-23 17:09:46.189] fs.protected_symlinks = 1 [2025-09-23 17:09:46.205] kernel.modules_disabled = 1 [2025-09-23 17:09:46.397] [2025-09-23 17:09:46.397] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:09:47.751] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:09:55.447] SBL1:1210.0.1.0 [2025-09-23 17:09:55.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:09:57.062] SBL2:1210.0.1.0 [2025-09-23 17:09:57.106] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:09:57.206] j-A [2025-09-23 17:10:04.578] The R5 Autosar Classic is running [2025-09-23 17:10:04.578] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:10:04.578] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:10:05.186] INIT: version 2.96 booting [2025-09-23 17:10:05.297] INIT: Entering runlevel: 5 [2025-09-23 17:10:05.621] mtd28 attached [2025-09-23 17:10:05.621] mtd32 attached [2025-09-23 17:10:05.621] mtd24 attached [2025-09-23 17:10:05.621] ubi0:animations is mounted. [2025-09-23 17:10:05.621] RTNETLINK answers: File exists [2025-09-23 17:10:05.621] ubi2:textures is mounted. [2025-09-23 17:10:05.621] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:10:05.621] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:10:05.621] ubi1:dml_code is mounted. [2025-09-23 17:10:05.621] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:10:05.621] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:10:05.621] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:10:05.621] data.LB_FadeInType0=100 [2025-09-23 17:10:05.621] data.CHLH_FadeInType0=0 [2025-09-23 17:10:05.621] data.WU_FadeInDelay=0 [2025-09-23 17:10:05.621] max_time_out=0 [2025-09-23 17:10:05.621] No splash screen [2025-09-23 17:10:05.621] stop dss Done [2025-09-23 17:10:05.649] /dev/mem opened. [2025-09-23 17:10:05.649] Memory mapped at address 0xffffa4c15000. [2025-09-23 17:10:05.649] Read at address 0x00600018 (0xffffa4c15018): 0x00000000 [2025-09-23 17:10:05.649] Write at address 0x00600018 (0xffffa4c15018): 0x00400040, readback 0x00400040 [2025-09-23 17:10:05.649] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:10:05.665] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:10:05.761] Loaded PowerVR consumer services. [2025-09-23 17:10:05.888] Waiting data available... [2025-09-23 17:10:05.888] 512+0 records in [2025-09-23 17:10:05.904] 512+0 records out [2025-09-23 17:10:05.920] Starting syslogd/klogd: done [2025-09-23 17:10:05.936] DML Start [2025-09-23 17:10:06.128] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:10:06.619] DML res1: 0 [2025-09-23 17:10:06.784] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:10:06.800] Read Success [2025-09-23 17:10:06.800] Verifying certificate... [2025-09-23 17:10:07.056] Verified OK [2025-09-23 17:10:07.072] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:10:08.750] Verified OK [2025-09-23 17:10:08.784] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:10:09.333] Verified OK [2025-09-23 17:10:09.333] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:10:11.794] fs.protected_hardlinks = 1 [2025-09-23 17:10:11.810] fs.protected_symlinks = 1 [2025-09-23 17:10:11.810] kernel.modules_disabled = 1 [2025-09-23 17:10:12.002] [2025-09-23 17:10:12.002] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:10:13.441] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:10:21.226] SBL1:1210.0.1.0 [2025-09-23 17:10:21.257] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:10:22.841] SBL2:1210.0.1.0 [2025-09-23 17:10:22.887] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:10:22.984] j-A [2025-09-23 17:10:30.359] The R5 Autosar Classic is running [2025-09-23 17:10:30.359] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:10:30.359] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:10:30.966] INIT: version 2.96 booting [2025-09-23 17:10:31.077] INIT: Entering runlevel: 5 [2025-09-23 17:10:31.386] mtd24 attached [2025-09-23 17:10:31.386] mtd32 attached [2025-09-23 17:10:31.386] mtd28 attached [2025-09-23 17:10:31.386] ubi0:textures is mounted. [2025-09-23 17:10:31.386] ubi1:dml_code is mounted. [2025-09-23 17:10:31.386] RTNETLINK answers: File exists [2025-09-23 17:10:31.386] ubi2:animations is mounted. [2025-09-23 17:10:31.386] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:10:31.386] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:10:31.386] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:10:31.386] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:10:31.386] data.LB_FadeInType0=100 [2025-09-23 17:10:31.386] data.CHLH_FadeInType0=0 [2025-09-23 17:10:31.386] data.WU_FadeInDelay=0 [2025-09-23 17:10:31.386] max_time_out=0 [2025-09-23 17:10:31.386] No splash screen [2025-09-23 17:10:31.386] stop dss Done [2025-09-23 17:10:31.386] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:10:31.419] /dev/mem opened. [2025-09-23 17:10:31.419] Memory mapped at address 0xffffbad95000. [2025-09-23 17:10:31.456] Read at address 0x00600018 (0xffffbad95018): 0x00000000 [2025-09-23 17:10:31.456] Write at address 0x00600018 (0xffffbad95018): 0x00400040, readback 0x00400040 [2025-09-23 17:10:31.456] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:10:31.456] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:10:31.647] Loaded PowerVR consumer services. [2025-09-23 17:10:31.679] Waiting data available... [2025-09-23 17:10:31.695] 512+0 records in [2025-09-23 17:10:31.695] 512+0 records out [2025-09-23 17:10:31.743] Starting syslogd/klogd: done [2025-09-23 17:10:31.759] DML Start [2025-09-23 17:10:31.919] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:10:32.159] DML res1: 0 [2025-09-23 17:10:32.575] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:10:32.930] Read Success [2025-09-23 17:10:32.930] Verifying certificate... [2025-09-23 17:10:32.931] Verified OK [2025-09-23 17:10:32.931] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:10:34.641] Verified OK [2025-09-23 17:10:34.641] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:10:35.226] Verified OK [2025-09-23 17:10:35.226] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:10:37.767] fs.protected_hardlinks = 1 [2025-09-23 17:10:37.767] fs.protected_symlinks = 1 [2025-09-23 17:10:37.783] kernel.modules_disabled = 1 [2025-09-23 17:10:37.974] [2025-09-23 17:10:37.974] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:10:39.272] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:10:47.012] SBL1:1210.0.1.0 [2025-09-23 17:10:47.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:10:48.626] SBL2:1210.0.1.0 [2025-09-23 17:10:48.669] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:10:48.770] j-A [2025-09-23 17:10:56.140] The R5 Autosar Classic is running [2025-09-23 17:10:56.140] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:10:56.140] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:10:56.748] INIT: version 2.96 booting [2025-09-23 17:10:56.859] INIT: Entering runlevel: 5 [2025-09-23 17:10:57.184] mtd24 attached [2025-09-23 17:10:57.184] mtd32 attached [2025-09-23 17:10:57.184] mtd28 attached [2025-09-23 17:10:57.184] RTNETLINK answers: File exists [2025-09-23 17:10:57.184] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:10:57.184] ubi0:textures is mounted. [2025-09-23 17:10:57.184] ubi2:animations is mounted. [2025-09-23 17:10:57.184] ubi1:dml_code is mounted. [2025-09-23 17:10:57.184] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:10:57.184] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:10:57.184] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:10:57.184] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:10:57.184] data.LB_FadeInType0=100 [2025-09-23 17:10:57.184] data.CHLH_FadeInType0=0 [2025-09-23 17:10:57.184] data.WU_FadeInDelay=0 [2025-09-23 17:10:57.184] max_time_out=0 [2025-09-23 17:10:57.184] No splash screen [2025-09-23 17:10:57.184] stop dss Done [2025-09-23 17:10:57.208] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:10:57.208] /dev/mem opened. [2025-09-23 17:10:57.208] Memory mapped at address 0xffffa3bf0000. [2025-09-23 17:10:57.208] Read at address 0x00600018 (0xffffa3bf0018): 0x00000000 [2025-09-23 17:10:57.208] Write at address 0x00600018 (0xffffa3bf0018): 0x00400040, readback 0x00400040 [2025-09-23 17:10:57.208] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:10:57.352] Loaded PowerVR consumer services. [2025-09-23 17:10:57.448] 512+0 records in [2025-09-23 17:10:57.464] 512+0 records out [2025-09-23 17:10:57.464] Waiting data available... [2025-09-23 17:10:57.480] Starting syslogd/klogd: done [2025-09-23 17:10:57.496] DML Start [2025-09-23 17:10:57.704] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:10:58.183] DML res1: 0 [2025-09-23 17:10:58.358] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:10:58.358] Read Success [2025-09-23 17:10:58.358] Verifying certificate... [2025-09-23 17:10:58.598] Verified OK [2025-09-23 17:10:58.614] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:11:00.245] Verified OK [2025-09-23 17:11:00.261] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:11:00.878] Verified OK [2025-09-23 17:11:00.878] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:11:03.580] fs.protected_hardlinks = 1 [2025-09-23 17:11:03.580] fs.protected_symlinks = 1 [2025-09-23 17:11:03.596] kernel.modules_disabled = 1 [2025-09-23 17:11:03.788] [2025-09-23 17:11:03.788] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:11:05.014] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:11:12.769] SBL1:1210.0.1.0 [2025-09-23 17:11:12.817] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:11:14.383] SBL2:1210.0.1.0 [2025-09-23 17:11:14.431] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:11:14.527] j-A [2025-09-23 17:11:21.881] The R5 Autosar Classic is running [2025-09-23 17:11:21.905] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:11:21.905] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:11:22.513] INIT: version 2.96 booting [2025-09-23 17:11:22.932] INIT: Entering runlevel: 5 [2025-09-23 17:11:22.932] mtd32 attached [2025-09-23 17:11:22.932] mtd24 attached [2025-09-23 17:11:22.932] mtd28 attached [2025-09-23 17:11:22.932] ubi0:dml_code is mounted. [2025-09-23 17:11:22.932] RTNETLINK answers: File exists [2025-09-23 17:11:22.932] ubi1:textures is mounted. [2025-09-23 17:11:22.932] ubi2:animations is mounted. [2025-09-23 17:11:22.932] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:11:22.932] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:11:22.932] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:11:22.932] data.LB_FadeInType0=100 [2025-09-23 17:11:22.932] data.CHLH_FadeInType0=0 [2025-09-23 17:11:22.932] data.WU_FadeInDelay=0 [2025-09-23 17:11:22.932] max_time_out=0 [2025-09-23 17:11:22.932] No splash screen [2025-09-23 17:11:22.932] stop dss Done [2025-09-23 17:11:22.932] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:11:22.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:11:22.935] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:11:22.976] /dev/mem opened. [2025-09-23 17:11:22.976] Memory mapped at address 0xffffb6639000. [2025-09-23 17:11:22.976] Read at address 0x00600018 (0xffffb6639018): 0x00000000 [2025-09-23 17:11:22.976] Write at address 0x00600018 (0xffffb6639018): 0x00400040, readback 0x00400040 [2025-09-23 17:11:22.976] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:11:23.071] Loaded PowerVR consumer services. [2025-09-23 17:11:23.240] Waiting data available... [2025-09-23 17:11:23.240] 512+0 records in [2025-09-23 17:11:23.240] 512+0 records out [2025-09-23 17:11:23.256] Starting syslogd/klogd: done [2025-09-23 17:11:23.271] DML Start [2025-09-23 17:11:23.432] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:11:23.933] DML res1: 0 [2025-09-23 17:11:24.199] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:11:24.199] Read Success [2025-09-23 17:11:24.199] Verifying certificate... [2025-09-23 17:11:24.470] Verified OK [2025-09-23 17:11:24.518] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:11:26.191] Verified OK [2025-09-23 17:11:26.191] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:11:26.715] Verified OK [2025-09-23 17:11:26.715] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:11:29.225] fs.protected_hardlinks = 1 [2025-09-23 17:11:29.225] fs.protected_symlinks = 1 [2025-09-23 17:11:29.225] kernel.modules_disabled = 1 [2025-09-23 17:11:29.401] [2025-09-23 17:11:29.401] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:11:30.783] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:11:38.529] SBL1:1210.0.1.0 [2025-09-23 17:11:38.577] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:11:40.144] SBL2:1210.0.1.0 [2025-09-23 17:11:40.192] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:11:40.288] j-A [2025-09-23 17:11:47.642] The R5 Autosar Classic is running [2025-09-23 17:11:47.667] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:11:47.667] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:11:48.275] INIT: version 2.96 booting [2025-09-23 17:11:48.668] INIT: Entering runlevel: 5 [2025-09-23 17:11:48.668] mtd24 attached [2025-09-23 17:11:48.668] mtd28 attached [2025-09-23 17:11:48.668] mtd32 attached [2025-09-23 17:11:48.668] ubi0:textures is mounted. [2025-09-23 17:11:48.668] RTNETLINK answers: File exists [2025-09-23 17:11:48.668] ubi1:animations is mounted. [2025-09-23 17:11:48.668] ubi2:dml_code is mounted. [2025-09-23 17:11:48.668] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:11:48.668] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:11:48.684] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:11:48.684] data.LB_FadeInType0=100 [2025-09-23 17:11:48.684] data.CHLH_FadeInType0=0 [2025-09-23 17:11:48.684] data.WU_FadeInDelay=0 [2025-09-23 17:11:48.684] max_time_out=0 [2025-09-23 17:11:48.684] No splash screen [2025-09-23 17:11:48.684] stop dss Done [2025-09-23 17:11:48.684] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:11:48.684] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:11:48.731] /dev/mem opened. [2025-09-23 17:11:48.731] Memory mapped at address 0xffffa71e1000. [2025-09-23 17:11:48.768] Read at address 0x00600018 (0xffffa71e1018): 0x00000000 [2025-09-23 17:11:48.768] Write at address 0x00600018 (0xffffa71e1018): 0x00400040, readback 0x00400040 [2025-09-23 17:11:48.768] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:11:48.768] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:11:48.880] Loaded PowerVR consumer services. [2025-09-23 17:11:48.992] Waiting data available... [2025-09-23 17:11:49.008] 512+0 records in [2025-09-23 17:11:49.008] 512+0 records out [2025-09-23 17:11:49.056] Starting syslogd/klogd: done [2025-09-23 17:11:49.072] DML Start [2025-09-23 17:11:49.231] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:11:49.456] DML res1: 0 [2025-09-23 17:11:49.918] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:11:49.918] Read Success [2025-09-23 17:11:49.918] Verifying certificate... [2025-09-23 17:11:50.215] Verified OK [2025-09-23 17:11:50.215] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:11:51.941] Verified OK [2025-09-23 17:11:51.941] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:11:52.482] Verified OK [2025-09-23 17:11:52.482] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:11:54.896] fs.protected_hardlinks = 1 [2025-09-23 17:11:54.919] fs.protected_symlinks = 1 [2025-09-23 17:11:54.919] kernel.modules_disabled = 1 [2025-09-23 17:11:55.119] [2025-09-23 17:11:55.119] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:11:56.619] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:12:04.325] SBL1:1210.0.1.0 [2025-09-23 17:12:04.373] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:12:05.955] SBL2:1210.0.1.0 [2025-09-23 17:12:05.987] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:12:06.099] j-A [2025-09-23 17:12:13.437] The R5 Autosar Classic is running [2025-09-23 17:12:13.468] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:12:13.468] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:12:14.076] INIT: version 2.96 booting [2025-09-23 17:12:14.187] INIT: Entering runlevel: 5 [2025-09-23 17:12:14.481] mtd24 attached [2025-09-23 17:12:14.481] mtd28 attached [2025-09-23 17:12:14.481] mtd32 attached [2025-09-23 17:12:14.481] ubi0:textures is mounted. [2025-09-23 17:12:14.481] RTNETLINK answers: File exists [2025-09-23 17:12:14.481] ubi2:dml_code is mounted. [2025-09-23 17:12:14.481] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:12:14.481] ubi1:animations is mounted. [2025-09-23 17:12:14.481] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:12:14.481] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:12:14.481] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:12:14.481] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:12:14.481] data.LB_FadeInType0=100 [2025-09-23 17:12:14.481] data.CHLH_FadeInType0=0 [2025-09-23 17:12:14.481] data.WU_FadeInDelay=0 [2025-09-23 17:12:14.481] max_time_out=0 [2025-09-23 17:12:14.481] No splash screen [2025-09-23 17:12:14.481] stop dss Done [2025-09-23 17:12:14.513] /dev/mem opened. [2025-09-23 17:12:14.513] Memory mapped at address 0xffff83616000. [2025-09-23 17:12:14.545] Read at address 0x00600018 (0xffff83616018): 0x00000000 [2025-09-23 17:12:14.545] Write at address 0x00600018 (0xffff83616018): 0x00400040, readback 0x00400040 [2025-09-23 17:12:14.545] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:12:14.545] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:12:14.737] Loaded PowerVR consumer services. [2025-09-23 17:12:14.801] Waiting data available... [2025-09-23 17:12:14.817] 512+0 records in [2025-09-23 17:12:14.817] 512+0 records out [2025-09-23 17:12:14.833] Starting syslogd/klogd: done [2025-09-23 17:12:14.849] DML Start [2025-09-23 17:12:15.010] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:12:15.185] DML res1: 0 [2025-09-23 17:12:15.792] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:12:15.808] Read Success [2025-09-23 17:12:15.808] Verifying certificate... [2025-09-23 17:12:16.032] Verified OK [2025-09-23 17:12:16.048] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:12:17.697] Verified OK [2025-09-23 17:12:17.697] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:12:18.297] Verified OK [2025-09-23 17:12:18.297] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:12:20.839] fs.protected_hardlinks = 1 [2025-09-23 17:12:20.855] fs.protected_symlinks = 1 [2025-09-23 17:12:20.855] kernel.modules_disabled = 1 [2025-09-23 17:12:21.046] [2025-09-23 17:12:21.046] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:12:22.362] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:12:30.105] SBL1:1210.0.1.0 [2025-09-23 17:12:30.137] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:12:31.719] SBL2:1210.0.1.0 [2025-09-23 17:12:31.763] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:12:31.863] j-A [2025-09-23 17:12:39.235] The R5 Autosar Classic is running [2025-09-23 17:12:39.235] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:12:39.235] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:12:39.843] INIT: version 2.96 booting [2025-09-23 17:12:39.955] INIT: Entering runlevel: 5 [2025-09-23 17:12:40.263] mtd24 attached [2025-09-23 17:12:40.263] mtd28 attached [2025-09-23 17:12:40.263] mtd32 attached [2025-09-23 17:12:40.263] RTNETLINK answers: File exists [2025-09-23 17:12:40.263] ubi1:animations is mounted. [2025-09-23 17:12:40.263] ubi0:textures is mounted. [2025-09-23 17:12:40.263] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:12:40.263] ubi2:dml_code is mounted. [2025-09-23 17:12:40.263] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:12:40.263] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:12:40.263] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:12:40.263] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:12:40.263] data.LB_FadeInType0=100 [2025-09-23 17:12:40.263] data.CHLH_FadeInType0=0 [2025-09-23 17:12:40.263] data.WU_FadeInDelay=0 [2025-09-23 17:12:40.263] max_time_out=0 [2025-09-23 17:12:40.263] No splash screen [2025-09-23 17:12:40.263] stop dss Done [2025-09-23 17:12:40.308] /dev/mem opened. [2025-09-23 17:12:40.308] Memory mapped at address 0xffff9fd93000. [2025-09-23 17:12:40.340] Read at address 0x00600018 (0xffff9fd93018): 0x00000000 [2025-09-23 17:12:40.340] Write at address 0x00600018 (0xffff9fd93018): 0x00400040, readback 0x00400040 [2025-09-23 17:12:40.340] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:12:40.340] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:12:40.517] Loaded PowerVR consumer services. [2025-09-23 17:12:40.564] 512+0 records in [2025-09-23 17:12:40.564] 512+0 records out [2025-09-23 17:12:40.580] Waiting data available... [2025-09-23 17:12:40.612] Starting syslogd/klogd: done [2025-09-23 17:12:40.628] DML Start [2025-09-23 17:12:40.788] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:12:41.277] DML res1: 0 [2025-09-23 17:12:41.488] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:12:41.488] Read Success [2025-09-23 17:12:41.488] Verifying certificate... [2025-09-23 17:12:41.775] Verified OK [2025-09-23 17:12:41.807] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:12:43.564] Verified OK [2025-09-23 17:12:43.564] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:12:44.108] Verified OK [2025-09-23 17:12:44.108] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:12:46.618] fs.protected_hardlinks = 1 [2025-09-23 17:12:46.618] fs.protected_symlinks = 1 [2025-09-23 17:12:46.634] kernel.modules_disabled = 1 [2025-09-23 17:12:46.842] [2025-09-23 17:12:46.842] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:12:48.136] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:12:55.857] SBL1:1210.0.1.0 [2025-09-23 17:12:55.905] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:12:57.472] SBL2:1210.0.1.0 [2025-09-23 17:12:57.514] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:12:57.616] j-A [2025-09-23 17:13:04.969] The R5 Autosar Classic is running [2025-09-23 17:13:04.969] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:13:04.989] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:13:05.598] INIT: version 2.96 booting [2025-09-23 17:13:05.709] INIT: Entering runlevel: 5 [2025-09-23 17:13:05.869] mtd32 attached [2025-09-23 17:13:05.869] mtd28 attached [2025-09-23 17:13:05.885] mtd24 attached [2025-09-23 17:13:05.917] ubi0:dml_code is mounted. [2025-09-23 17:13:06.040] RTNETLINK answers: File exists [2025-09-23 17:13:06.040] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:13:06.040] ubi2:textures is mounted. [2025-09-23 17:13:06.040] ubi1:animations is mounted. [2025-09-23 17:13:06.040] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:13:06.040] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:13:06.040] data.LB_FadeInType0=100 [2025-09-23 17:13:06.040] data.CHLH_FadeInType0=0 [2025-09-23 17:13:06.040] data.WU_FadeInDelay=0 [2025-09-23 17:13:06.040] max_time_out=0 [2025-09-23 17:13:06.040] No splash screen [2025-09-23 17:13:06.040] stop dss Done [2025-09-23 17:13:06.040] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:13:06.040] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:13:06.049] /dev/mem opened. [2025-09-23 17:13:06.049] Memory mapped at address 0xffff9bc34000. [2025-09-23 17:13:06.049] Read at address 0x00600018 (0xffff9bc34018): 0x00000000 [2025-09-23 17:13:06.049] Write at address 0x00600018 (0xffff9bc34018): 0x00400040, readback 0x00400040 [2025-09-23 17:13:06.097] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:13:06.113] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:13:06.304] Loaded PowerVR consumer services. [2025-09-23 17:13:06.352] 512+0 records in [2025-09-23 17:13:06.352] 512+0 records out [2025-09-23 17:13:06.352] Waiting data available... [2025-09-23 17:13:06.384] Starting syslogd/klogd: done [2025-09-23 17:13:06.400] DML Start [2025-09-23 17:13:06.559] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:13:07.044] DML res1: 0 [2025-09-23 17:13:07.231] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:13:07.247] Read Success [2025-09-23 17:13:07.247] Verifying certificate... [2025-09-23 17:13:07.518] Verified OK [2025-09-23 17:13:07.534] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:13:09.255] Verified OK [2025-09-23 17:13:09.255] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:13:09.796] Verified OK [2025-09-23 17:13:09.796] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:13:12.338] fs.protected_hardlinks = 1 [2025-09-23 17:13:12.338] fs.protected_symlinks = 1 [2025-09-23 17:13:12.354] kernel.modules_disabled = 1 [2025-09-23 17:13:12.546] [2025-09-23 17:13:12.546] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:13:13.834] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:13:21.626] SBL1:1210.0.1.0 [2025-09-23 17:13:21.658] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:13:23.240] SBL2:1210.0.1.0 [2025-09-23 17:13:23.272] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:13:23.384] j-A [2025-09-23 17:13:30.756] The R5 Autosar Classic is running [2025-09-23 17:13:30.756] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:13:30.756] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:13:31.364] INIT: version 2.96 booting [2025-09-23 17:13:31.476] INIT: Entering runlevel: 5 [2025-09-23 17:13:31.810] mtd32 attached [2025-09-23 17:13:31.810] mtd28 attached [2025-09-23 17:13:31.810] mtd24 attached [2025-09-23 17:13:31.810] RTNETLINK answers: File exists [2025-09-23 17:13:31.810] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:13:31.810] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:13:31.810] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:13:31.810] ubi1:animations is mounted. [2025-09-23 17:13:31.810] ubi2:textures is mounted. [2025-09-23 17:13:31.810] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:13:31.810] ubi0:dml_code is mounted. [2025-09-23 17:13:31.810] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:13:31.810] data.LB_FadeInType0=100 [2025-09-23 17:13:31.810] data.CHLH_FadeInType0=0 [2025-09-23 17:13:31.810] data.WU_FadeInDelay=0 [2025-09-23 17:13:31.810] max_time_out=0 [2025-09-23 17:13:31.810] No splash screen [2025-09-23 17:13:31.810] stop dss Done [2025-09-23 17:13:31.810] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:13:31.810] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:13:31.838] /dev/mem opened. [2025-09-23 17:13:31.838] Memory mapped at address 0xffff9b8f7000. [2025-09-23 17:13:31.838] Read at address 0x00600018 (0xffff9b8f7018): 0x00000000 [2025-09-23 17:13:31.838] Write at address 0x00600018 (0xffff9b8f7018): 0x00400040, readback 0x00400040 [2025-09-23 17:13:31.918] Loaded PowerVR consumer services. [2025-09-23 17:13:32.062] 512+0 records in [2025-09-23 17:13:32.062] 512+0 records out [2025-09-23 17:13:32.078] Waiting data available... [2025-09-23 17:13:32.126] Starting syslogd/klogd: done [2025-09-23 17:13:32.142] DML Start [2025-09-23 17:13:32.333] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:13:32.809] DML res1: 0 [2025-09-23 17:13:32.973] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:13:32.989] Read Success [2025-09-23 17:13:32.989] Verifying certificate... [2025-09-23 17:13:33.245] Verified OK [2025-09-23 17:13:33.261] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:13:34.918] Verified OK [2025-09-23 17:13:34.918] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:13:35.526] Verified OK [2025-09-23 17:13:35.526] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:13:38.067] fs.protected_hardlinks = 1 [2025-09-23 17:13:38.083] fs.protected_symlinks = 1 [2025-09-23 17:13:38.083] kernel.modules_disabled = 1 [2025-09-23 17:13:38.275] [2025-09-23 17:13:38.275] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:13:39.595] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:13:47.382] SBL1:1210.0.1.0 [2025-09-23 17:13:47.414] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:13:48.996] SBL2:1210.0.1.0 [2025-09-23 17:13:49.045] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:13:49.140] j-A [2025-09-23 17:13:56.511] The R5 Autosar Classic is running [2025-09-23 17:13:56.511] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:13:56.511] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:13:57.119] INIT: version 2.96 booting [2025-09-23 17:13:57.230] INIT: Entering runlevel: 5 [2025-09-23 17:13:57.544] mtd24 attached [2025-09-23 17:13:57.544] mtd28 attached [2025-09-23 17:13:57.544] mtd32 attached [2025-09-23 17:13:57.544] ubi0:textures is mounted. [2025-09-23 17:13:57.544] RTNETLINK answers: File exists [2025-09-23 17:13:57.544] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:13:57.544] ubi2:dml_code is mounted. [2025-09-23 17:13:57.544] ubi1:animations is mounted. [2025-09-23 17:13:57.544] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:13:57.544] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:13:57.544] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:13:57.544] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:13:57.544] data.LB_FadeInType0=100 [2025-09-23 17:13:57.544] data.CHLH_FadeInType0=0 [2025-09-23 17:13:57.544] data.WU_FadeInDelay=0 [2025-09-23 17:13:57.544] max_time_out=0 [2025-09-23 17:13:57.544] No splash screen [2025-09-23 17:13:57.544] stop dss Done [2025-09-23 17:13:57.544] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:13:57.549] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:13:57.565] /dev/mem opened. [2025-09-23 17:13:57.565] Memory mapped at address 0xffff9e505000. [2025-09-23 17:13:57.592] Read at address 0x00600018 (0xffff9e505018): 0x00000000 [2025-09-23 17:13:57.592] Write at address 0x00600018 (0xffff9e505018): 0x00400040, readback 0x00400040 [2025-09-23 17:13:57.815] Loaded PowerVR consumer services. [2025-09-23 17:13:57.831] Waiting data available... [2025-09-23 17:13:57.863] 512+0 records in [2025-09-23 17:13:57.863] 512+0 records out [2025-09-23 17:13:57.879] Starting syslogd/klogd: done [2025-09-23 17:13:57.895] DML Start [2025-09-23 17:13:58.071] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:13:58.326] DML res1: 0 [2025-09-23 17:13:58.752] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:13:58.752] Read Success [2025-09-23 17:13:58.752] Verifying certificate... [2025-09-23 17:13:59.090] Verified OK [2025-09-23 17:13:59.090] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:14:00.792] Verified OK [2025-09-23 17:14:00.792] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:14:01.409] Verified OK [2025-09-23 17:14:01.409] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:14:03.967] fs.protected_hardlinks = 1 [2025-09-23 17:14:04.002] fs.protected_symlinks = 1 [2025-09-23 17:14:04.002] kernel.modules_disabled = 1 [2025-09-23 17:14:04.192] [2025-09-23 17:14:04.192] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:14:05.429] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:14:13.141] SBL1:1210.0.1.0 [2025-09-23 17:14:13.173] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:14:14.756] SBL2:1210.0.1.0 [2025-09-23 17:14:14.795] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:14:14.900] j-A [2025-09-23 17:14:22.271] The R5 Autosar Classic is running [2025-09-23 17:14:22.271] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:14:22.271] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:14:22.879] INIT: version 2.96 booting [2025-09-23 17:14:22.990] INIT: Entering runlevel: 5 [2025-09-23 17:14:23.310] mtd24 attached [2025-09-23 17:14:23.310] mtd28 attached [2025-09-23 17:14:23.310] mtd32 attached [2025-09-23 17:14:23.310] ubi0:textures is mounted. [2025-09-23 17:14:23.310] ubi1:animations is mounted. [2025-09-23 17:14:23.310] RTNETLINK answers: File exists [2025-09-23 17:14:23.310] ubi2:dml_code is mounted. [2025-09-23 17:14:23.310] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:14:23.310] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:14:23.310] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:14:23.310] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:14:23.310] data.LB_FadeInType0=100 [2025-09-23 17:14:23.310] data.CHLH_FadeInType0=0 [2025-09-23 17:14:23.310] data.WU_FadeInDelay=0 [2025-09-23 17:14:23.310] max_time_out=0 [2025-09-23 17:14:23.310] No splash screen [2025-09-23 17:14:23.310] stop dss Done [2025-09-23 17:14:23.310] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:14:23.322] /dev/mem opened. [2025-09-23 17:14:23.322] Memory mapped at address 0xffff8618c000. [2025-09-23 17:14:23.359] Read at address 0x00600018 (0xffff8618c018): 0x00000000 [2025-09-23 17:14:23.359] Write at address 0x00600018 (0xffff8618c018): 0x00400040, readback 0x00400040 [2025-09-23 17:14:23.359] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:14:23.390] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:14:23.470] Loaded PowerVR consumer services. [2025-09-23 17:14:23.598] Waiting data available... [2025-09-23 17:14:23.614] 512+0 records in [2025-09-23 17:14:23.614] 512+0 records out [2025-09-23 17:14:23.646] Starting syslogd/klogd: done [2025-09-23 17:14:23.678] DML Start [2025-09-23 17:14:23.854] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:14:24.094] DML res1: 0 [2025-09-23 17:14:24.494] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:14:24.494] Read Success [2025-09-23 17:14:24.841] Verifying certificate... [2025-09-23 17:14:24.841] Verified OK [2025-09-23 17:14:24.841] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:14:26.411] Verified OK [2025-09-23 17:14:26.411] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:14:27.002] Verified OK [2025-09-23 17:14:27.002] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:14:29.672] fs.protected_hardlinks = 1 [2025-09-23 17:14:29.688] fs.protected_symlinks = 1 [2025-09-23 17:14:29.688] kernel.modules_disabled = 1 [2025-09-23 17:14:29.863] [2025-09-23 17:14:29.863] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:14:31.184] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:14:38.893] SBL1:1210.0.1.0 [2025-09-23 17:14:38.924] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:14:40.507] SBL2:1210.0.1.0 [2025-09-23 17:14:40.545] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:14:40.651] j-A [2025-09-23 17:14:48.021] The R5 Autosar Classic is running [2025-09-23 17:14:48.021] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:14:48.021] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:14:48.628] INIT: version 2.96 booting [2025-09-23 17:14:48.740] INIT: Entering runlevel: 5 [2025-09-23 17:14:49.059] mtd28 attached [2025-09-23 17:14:49.059] mtd32 attached [2025-09-23 17:14:49.059] mtd24 attached [2025-09-23 17:14:49.059] RTNETLINK answers: File exists [2025-09-23 17:14:49.059] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:14:49.059] ubi0:animations is mounted. [2025-09-23 17:14:49.059] ubi1:dml_code is mounted. [2025-09-23 17:14:49.059] ubi2:textures is mounted. [2025-09-23 17:14:49.059] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:14:49.059] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:14:49.059] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:14:49.059] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:14:49.059] data.LB_FadeInType0=100 [2025-09-23 17:14:49.059] data.CHLH_FadeInType0=0 [2025-09-23 17:14:49.059] data.WU_FadeInDelay=0 [2025-09-23 17:14:49.059] max_time_out=0 [2025-09-23 17:14:49.059] No splash screen [2025-09-23 17:14:49.059] stop dss Done [2025-09-23 17:14:49.064] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:14:49.080] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:14:49.080] /dev/mem opened. [2025-09-23 17:14:49.112] Memory mapped at address 0xffff9e227000. [2025-09-23 17:14:49.112] Read at address 0x00600018 (0xffff9e227018): 0x00000000 [2025-09-23 17:14:49.112] Write at address 0x00600018 (0xffff9e227018): 0x00400040, readback 0x00400040 [2025-09-23 17:14:49.241] Loaded PowerVR consumer services. [2025-09-23 17:14:49.365] Waiting data available... [2025-09-23 17:14:49.365] 512+0 records in [2025-09-23 17:14:49.365] 512+0 records out [2025-09-23 17:14:49.381] Starting syslogd/klogd: done [2025-09-23 17:14:49.413] DML Start [2025-09-23 17:14:49.589] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:14:49.829] DML res1: 0 [2025-09-23 17:14:50.267] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:14:50.267] Read Success [2025-09-23 17:14:50.267] Verifying certificate... [2025-09-23 17:14:50.506] Verified OK [2025-09-23 17:14:50.591] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:14:52.191] Verified OK [2025-09-23 17:14:52.191] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:14:52.804] Verified OK [2025-09-23 17:14:52.804] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:14:55.522] fs.protected_hardlinks = 1 [2025-09-23 17:14:55.522] fs.protected_symlinks = 1 [2025-09-23 17:14:55.538] kernel.modules_disabled = 1 [2025-09-23 17:14:55.730] [2025-09-23 17:14:55.730] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:14:56.908] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:15:04.658] SBL1:1210.0.1.0 [2025-09-23 17:15:04.706] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:15:06.273] SBL2:1210.0.1.0 [2025-09-23 17:15:06.321] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:15:06.418] j-A [2025-09-23 17:15:13.771] The R5 Autosar Classic is running [2025-09-23 17:15:13.792] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:15:13.792] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:15:14.399] INIT: version 2.96 booting [2025-09-23 17:15:14.810] INIT: Entering runlevel: 5 [2025-09-23 17:15:14.810] mtd24 attached [2025-09-23 17:15:14.810] mtd28 attached [2025-09-23 17:15:14.810] mtd32 attached [2025-09-23 17:15:14.810] ubi0:textures is mounted. [2025-09-23 17:15:14.810] RTNETLINK answers: File exists [2025-09-23 17:15:14.810] ubi1:animations is mounted. [2025-09-23 17:15:14.810] ubi2:dml_code is mounted. [2025-09-23 17:15:14.810] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:15:14.810] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:15:14.810] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:15:14.810] data.LB_FadeInType0=100 [2025-09-23 17:15:14.810] data.CHLH_FadeInType0=0 [2025-09-23 17:15:14.810] data.WU_FadeInDelay=0 [2025-09-23 17:15:14.810] max_time_out=0 [2025-09-23 17:15:14.810] No splash screen [2025-09-23 17:15:14.810] stop dss Done [2025-09-23 17:15:14.813] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:15:14.813] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:15:14.829] /dev/mem opened. [2025-09-23 17:15:14.829] Memory mapped at address 0xffffb93f3000. [2025-09-23 17:15:14.855] Read at address 0x00600018 (0xffffb93f3018): 0x00000000 [2025-09-23 17:15:14.855] Write at address 0x00600018 (0xffffb93f3018): 0x00400040, readback 0x00400040 [2025-09-23 17:15:14.871] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:15:14.886] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:15:15.015] Loaded PowerVR consumer services. [2025-09-23 17:15:15.110] Waiting data available... [2025-09-23 17:15:15.126] 512+0 records in [2025-09-23 17:15:15.126] 512+0 records out [2025-09-23 17:15:15.158] Starting syslogd/klogd: done [2025-09-23 17:15:15.174] DML Start [2025-09-23 17:15:15.366] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:15:15.809] DML res1: 0 [2025-09-23 17:15:15.974] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:15:16.000] Read Success [2025-09-23 17:15:16.000] Verifying certificate... [2025-09-23 17:15:16.287] Verified OK [2025-09-23 17:15:16.303] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:15:18.042] Verified OK [2025-09-23 17:15:18.042] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:15:18.647] Verified OK [2025-09-23 17:15:18.647] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:15:21.267] fs.protected_hardlinks = 1 [2025-09-23 17:15:21.267] fs.protected_symlinks = 1 [2025-09-23 17:15:21.283] kernel.modules_disabled = 1 [2025-09-23 17:15:21.476] [2025-09-23 17:15:21.476] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:15:22.636] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:15:30.413] SBL1:1210.0.1.0 [2025-09-23 17:15:30.461] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:15:32.027] SBL2:1210.0.1.0 [2025-09-23 17:15:32.075] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:15:32.172] j-A [2025-09-23 17:15:39.544] The R5 Autosar Classic is running [2025-09-23 17:15:39.551] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:15:39.551] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:15:40.158] INIT: version 2.96 booting [2025-09-23 17:15:40.269] INIT: Entering runlevel: 5 [2025-09-23 17:15:40.414] mtd24 attached [2025-09-23 17:15:40.544] mtd28 attached [2025-09-23 17:15:40.545] mtd32 attached [2025-09-23 17:15:40.545] ubi0:textures is mounted. [2025-09-23 17:15:40.545] ubi1:animations is mounted. [2025-09-23 17:15:40.545] RTNETLINK answers: File exists [2025-09-23 17:15:40.557] ubi2:dml_code is mounted. [2025-09-23 17:15:40.557] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:15:40.557] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:15:40.557] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:15:40.557] data.LB_FadeInType0=100 [2025-09-23 17:15:40.557] data.CHLH_FadeInType0=0 [2025-09-23 17:15:40.557] data.WU_FadeInDelay=0 [2025-09-23 17:15:40.557] max_time_out=0 [2025-09-23 17:15:40.557] No splash screen [2025-09-23 17:15:40.557] stop dss Done [2025-09-23 17:15:40.557] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:15:40.557] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:15:40.630] /dev/mem opened. [2025-09-23 17:15:40.630] Memory mapped at address 0xffffa5bdc000. [2025-09-23 17:15:40.630] Read at address 0x00600018 (0xffffa5bdc018): 0x00000000 [2025-09-23 17:15:40.630] Write at address 0x00600018 (0xffffa5bdc018): 0x00400040, readback 0x00400040 [2025-09-23 17:15:40.646] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:15:40.662] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:15:40.870] Loaded PowerVR consumer services. [2025-09-23 17:15:40.886] Waiting data available... [2025-09-23 17:15:40.902] 512+0 records in [2025-09-23 17:15:40.902] 512+0 records out [2025-09-23 17:15:40.950] Starting syslogd/klogd: done [2025-09-23 17:15:40.982] DML Start [2025-09-23 17:15:41.158] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:15:41.382] DML res1: 0 [2025-09-23 17:15:41.808] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:15:41.808] Read Success [2025-09-23 17:15:41.808] Verifying certificate... [2025-09-23 17:15:42.091] Verified OK [2025-09-23 17:15:42.091] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:15:43.615] Verified OK [2025-09-23 17:15:43.615] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:15:44.237] Verified OK [2025-09-23 17:15:44.237] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:15:47.019] fs.protected_hardlinks = 1 [2025-09-23 17:15:47.019] fs.protected_symlinks = 1 [2025-09-23 17:15:47.019] kernel.modules_disabled = 1 [2025-09-23 17:15:47.193] [2025-09-23 17:15:47.193] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:15:48.487] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:15:56.179] SBL1:1210.0.1.0 [2025-09-23 17:15:56.227] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:15:57.794] SBL2:1210.0.1.0 [2025-09-23 17:15:57.842] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:15:57.953] j-A [2025-09-23 17:16:05.292] The R5 Autosar Classic is running [2025-09-23 17:16:05.317] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:16:05.317] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:16:05.924] INIT: version 2.96 booting [2025-09-23 17:16:06.325] INIT: Entering runlevel: 5 [2025-09-23 17:16:06.325] mtd28 attached [2025-09-23 17:16:06.325] mtd32 attached [2025-09-23 17:16:06.325] mtd24 attached [2025-09-23 17:16:06.325] ubi0:animations is mounted. [2025-09-23 17:16:06.326] RTNETLINK answers: File exists [2025-09-23 17:16:06.326] ubi1:dml_code is mounted. [2025-09-23 17:16:06.326] ubi2:textures is mounted. [2025-09-23 17:16:06.326] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:16:06.326] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:16:06.326] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:16:06.326] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:16:06.326] data.LB_FadeInType0=100 [2025-09-23 17:16:06.326] data.CHLH_FadeInType0=0 [2025-09-23 17:16:06.326] data.WU_FadeInDelay=0 [2025-09-23 17:16:06.326] max_time_out=0 [2025-09-23 17:16:06.326] No splash screen [2025-09-23 17:16:06.326] stop dss Done [2025-09-23 17:16:06.326] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:16:06.397] /dev/mem opened. [2025-09-23 17:16:06.397] Memory mapped at address 0xffff9f550000. [2025-09-23 17:16:06.397] Read at address 0x00600018 (0xffff9f550018): 0x00000000 [2025-09-23 17:16:06.397] Write at address 0x00600018 (0xffff9f550018): 0x00400040, readback 0x00400040 [2025-09-23 17:16:06.429] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:16:06.446] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:16:06.606] Loaded PowerVR consumer services. [2025-09-23 17:16:06.638] 512+0 records in [2025-09-23 17:16:06.638] 512+0 records out [2025-09-23 17:16:06.670] Waiting data available... [2025-09-23 17:16:06.686] Starting syslogd/klogd: done [2025-09-23 17:16:06.701] DML Start [2025-09-23 17:16:06.894] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:16:07.117] DML res1: 0 [2025-09-23 17:16:07.533] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:16:07.549] Read Success [2025-09-23 17:16:07.549] Verifying certificate... [2025-09-23 17:16:07.821] Verified OK [2025-09-23 17:16:07.836] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:16:09.441] Verified OK [2025-09-23 17:16:09.441] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:16:10.025] Verified OK [2025-09-23 17:16:10.025] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:16:12.710] fs.protected_hardlinks = 1 [2025-09-23 17:16:12.710] fs.protected_symlinks = 1 [2025-09-23 17:16:12.726] kernel.modules_disabled = 1 [2025-09-23 17:16:12.902] [2025-09-23 17:16:12.902] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:16:14.206] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:16:21.943] SBL1:1210.0.1.0 [2025-09-23 17:16:21.991] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:16:23.557] SBL2:1210.0.1.0 [2025-09-23 17:16:23.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:16:23.702] j-A [2025-09-23 17:16:31.056] The R5 Autosar Classic is running [2025-09-23 17:16:31.056] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:16:31.077] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:16:31.685] INIT: version 2.96 booting [2025-09-23 17:16:31.797] INIT: Entering runlevel: 5 [2025-09-23 17:16:31.940] mtd32 attached [2025-09-23 17:16:31.956] mtd24 attached [2025-09-23 17:16:31.973] mtd28 attached [2025-09-23 17:16:31.989] ubi0:dml_code is mounted. [2025-09-23 17:16:32.095] RTNETLINK answers: File exists [2025-09-23 17:16:32.095] ubi1:textures is mounted. [2025-09-23 17:16:32.096] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:16:32.096] ubi2:animations is mounted. [2025-09-23 17:16:32.096] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:16:32.096] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:16:32.096] data.LB_FadeInType0=100 [2025-09-23 17:16:32.096] data.CHLH_FadeInType0=0 [2025-09-23 17:16:32.096] data.WU_FadeInDelay=0 [2025-09-23 17:16:32.096] max_time_out=0 [2025-09-23 17:16:32.096] No splash screen [2025-09-23 17:16:32.096] stop dss Done [2025-09-23 17:16:32.096] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:16:32.096] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:16:32.133] /dev/mem opened. [2025-09-23 17:16:32.133] Memory mapped at address 0xffffa2079000. [2025-09-23 17:16:32.133] Read at address 0x00600018 (0xffffa2079018): 0x00000000 [2025-09-23 17:16:32.133] Write at address 0x00600018 (0xffffa2079018): 0x00400040, readback 0x00400040 [2025-09-23 17:16:32.197] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:16:32.226] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:16:32.386] Loaded PowerVR consumer services. [2025-09-23 17:16:32.402] Waiting data available... [2025-09-23 17:16:32.434] 512+0 records in [2025-09-23 17:16:32.434] 512+0 records out [2025-09-23 17:16:32.466] Starting syslogd/klogd: done [2025-09-23 17:16:32.498] DML Start [2025-09-23 17:16:32.642] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:16:32.882] DML res1: 0 [2025-09-23 17:16:33.281] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:16:33.302] Read Success [2025-09-23 17:16:33.302] Verifying certificate... [2025-09-23 17:16:33.542] Verified OK [2025-09-23 17:16:33.558] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:16:35.268] Verified OK [2025-09-23 17:16:35.268] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:16:35.844] Verified OK [2025-09-23 17:16:35.844] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:16:38.434] fs.protected_hardlinks = 1 [2025-09-23 17:16:38.434] fs.protected_symlinks = 1 [2025-09-23 17:16:38.449] kernel.modules_disabled = 1 [2025-09-23 17:16:38.658] [2025-09-23 17:16:38.658] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:16:39.968] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:16:47.699] SBL1:1210.0.1.0 [2025-09-23 17:16:47.747] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:16:49.312] SBL2:1210.0.1.0 [2025-09-23 17:16:49.361] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:16:49.457] j-A [2025-09-23 17:16:56.812] The R5 Autosar Classic is running [2025-09-23 17:16:56.836] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:16:56.836] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:16:57.443] INIT: version 2.96 booting [2025-09-23 17:16:57.555] INIT: Entering runlevel: 5 [2025-09-23 17:16:57.715] mtd24 attached [2025-09-23 17:16:57.715] mtd32 attached [2025-09-23 17:16:57.731] mtd28 attached [2025-09-23 17:16:57.779] ubi0:textures is mounted. [2025-09-23 17:16:57.779] ubi1:dml_code is mounted. [2025-09-23 17:16:57.779] RTNETLINK answers: File exists [2025-09-23 17:16:57.870] ubi2:animations is mounted. [2025-09-23 17:16:57.870] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:16:57.870] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:16:57.870] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:16:57.870] data.LB_FadeInType0=100 [2025-09-23 17:16:57.870] data.CHLH_FadeInType0=0 [2025-09-23 17:16:57.870] data.WU_FadeInDelay=0 [2025-09-23 17:16:57.870] max_time_out=0 [2025-09-23 17:16:57.870] No splash screen [2025-09-23 17:16:57.870] stop dss Done [2025-09-23 17:16:57.870] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:16:57.870] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:16:57.886] /dev/mem opened. [2025-09-23 17:16:57.912] Memory mapped at address 0xffff8832a000. [2025-09-23 17:16:57.912] Read at address 0x00600018 (0xffff8832a018): 0x00000000 [2025-09-23 17:16:57.912] Write at address 0x00600018 (0xffff8832a018): 0x00400040, readback 0x00400040 [2025-09-23 17:16:57.942] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:16:57.942] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:16:58.119] Loaded PowerVR consumer services. [2025-09-23 17:16:58.167] 512+0 records in [2025-09-23 17:16:58.167] 512+0 records out [2025-09-23 17:16:58.167] Waiting data available... [2025-09-23 17:16:58.215] Starting syslogd/klogd: done [2025-09-23 17:16:58.231] DML Start [2025-09-23 17:16:58.358] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:16:58.550] DML res1: 0 [2025-09-23 17:16:59.156] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:16:59.156] Read Success [2025-09-23 17:16:59.156] Verifying certificate... [2025-09-23 17:16:59.379] Verified OK [2025-09-23 17:16:59.395] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:17:01.028] Verified OK [2025-09-23 17:17:01.028] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:17:01.679] Verified OK [2025-09-23 17:17:01.679] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:17:04.378] fs.protected_hardlinks = 1 [2025-09-23 17:17:04.378] fs.protected_symlinks = 1 [2025-09-23 17:17:04.378] kernel.modules_disabled = 1 [2025-09-23 17:17:04.570] [2025-09-23 17:17:04.570] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:17:05.732] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:17:13.463] SBL1:1210.0.1.0 [2025-09-23 17:17:13.495] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:17:15.078] SBL2:1210.0.1.0 [2025-09-23 17:17:15.110] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:17:15.222] j-A [2025-09-23 17:17:22.593] The R5 Autosar Classic is running [2025-09-23 17:17:22.593] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:17:22.593] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:17:23.200] INIT: version 2.96 booting [2025-09-23 17:17:23.312] INIT: Entering runlevel: 5 [2025-09-23 17:17:23.623] mtd28 attached [2025-09-23 17:17:23.623] mtd24 attached [2025-09-23 17:17:23.623] mtd32 attached [2025-09-23 17:17:23.623] ubi0:animations is mounted. [2025-09-23 17:17:23.623] RTNETLINK answers: File exists [2025-09-23 17:17:23.623] ubi2:dml_code is mounted. [2025-09-23 17:17:23.623] ubi1:textures is mounted. [2025-09-23 17:17:23.623] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:17:23.623] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:17:23.623] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:17:23.623] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:17:23.623] data.LB_FadeInType0=100 [2025-09-23 17:17:23.623] data.CHLH_FadeInType0=0 [2025-09-23 17:17:23.623] data.WU_FadeInDelay=0 [2025-09-23 17:17:23.623] max_time_out=0 [2025-09-23 17:17:23.623] No splash screen [2025-09-23 17:17:23.623] stop dss Done [2025-09-23 17:17:23.623] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:17:23.671] /dev/mem opened. [2025-09-23 17:17:23.671] Memory mapped at address 0xffffbc523000. [2025-09-23 17:17:23.671] Read at address 0x00600018 (0xffffbc523018): 0x00000000 [2025-09-23 17:17:23.671] Write at address 0x00600018 (0xffffbc523018): 0x00400040, readback 0x00400040 [2025-09-23 17:17:23.671] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:17:23.687] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:17:23.767] Loaded PowerVR consumer services. [2025-09-23 17:17:23.935] Waiting data available... [2025-09-23 17:17:23.935] 512+0 records in [2025-09-23 17:17:23.935] 512+0 records out [2025-09-23 17:17:23.951] Starting syslogd/klogd: done [2025-09-23 17:17:23.967] DML Start [2025-09-23 17:17:24.143] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:17:24.382] DML res1: 0 [2025-09-23 17:17:24.808] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:17:24.808] Read Success [2025-09-23 17:17:24.808] Verifying certificate... [2025-09-23 17:17:25.032] Verified OK [2025-09-23 17:17:25.048] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:17:26.780] Verified OK [2025-09-23 17:17:26.780] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:17:27.366] Verified OK [2025-09-23 17:17:27.366] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:17:29.937] fs.protected_hardlinks = 1 [2025-09-23 17:17:29.937] fs.protected_symlinks = 1 [2025-09-23 17:17:29.937] kernel.modules_disabled = 1 [2025-09-23 17:17:30.130] [2025-09-23 17:17:30.130] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:17:31.466] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:17:39.212] SBL1:1210.0.1.0 [2025-09-23 17:17:39.244] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:17:40.827] SBL2:1210.0.1.0 [2025-09-23 17:17:40.860] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:17:40.971] j-A [2025-09-23 17:17:48.309] The R5 Autosar Classic is running [2025-09-23 17:17:48.340] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:17:48.340] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:17:48.948] INIT: version 2.96 booting [2025-09-23 17:17:49.059] INIT: Entering runlevel: 5 [2025-09-23 17:17:49.374] mtd28 attached [2025-09-23 17:17:49.374] mtd24 attached [2025-09-23 17:17:49.374] mtd32 attached [2025-09-23 17:17:49.374] ubi1:textures is mounted. [2025-09-23 17:17:49.374] ubi0:animations is mounted. [2025-09-23 17:17:49.374] RTNETLINK answers: File exists [2025-09-23 17:17:49.374] ubi2:dml_code is mounted. [2025-09-23 17:17:49.374] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:17:49.375] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:17:49.375] data.LB_FadeInType0=100 [2025-09-23 17:17:49.375] data.CHLH_FadeInType0=0 [2025-09-23 17:17:49.375] data.WU_FadeInDelay=0 [2025-09-23 17:17:49.375] max_time_out=0 [2025-09-23 17:17:49.375] No splash screen [2025-09-23 17:17:49.375] stop dss Done [2025-09-23 17:17:49.375] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:17:49.375] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:17:49.375] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:17:49.409] /dev/mem opened. [2025-09-23 17:17:49.409] Memory mapped at address 0xffffbc226000. [2025-09-23 17:17:49.409] Read at address 0x00600018 (0xffffbc226018): 0x00000000 [2025-09-23 17:17:49.409] Write at address 0x00600018 (0xffffbc226018): 0x00400040, readback 0x00400040 [2025-09-23 17:17:49.441] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:17:49.463] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:17:49.527] Loaded PowerVR consumer services. [2025-09-23 17:17:49.655] Waiting data available... [2025-09-23 17:17:49.670] 512+0 records in [2025-09-23 17:17:49.670] 512+0 records out [2025-09-23 17:17:49.703] Starting syslogd/klogd: done [2025-09-23 17:17:49.719] DML Start [2025-09-23 17:17:49.895] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:17:50.118] DML res1: 0 [2025-09-23 17:17:50.550] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:17:50.903] Read Success [2025-09-23 17:17:50.903] Verifying certificate... [2025-09-23 17:17:50.904] Verified OK [2025-09-23 17:17:50.904] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:17:52.644] Verified OK [2025-09-23 17:17:52.644] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:17:53.197] Verified OK [2025-09-23 17:17:53.197] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:17:55.582] fs.protected_hardlinks = 1 [2025-09-23 17:17:55.582] fs.protected_symlinks = 1 [2025-09-23 17:17:55.582] kernel.modules_disabled = 1 [2025-09-23 17:17:55.771] [2025-09-23 17:17:55.771] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:17:57.191] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:17:59.525] $SBL1:1210.0.1.0 [2025-09-23 17:18:05.023] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:18:06.590] SBL2:1210.0.1.0 [2025-09-23 17:18:06.638] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:18:06.733] j-A [2025-09-23 17:18:14.088] The R5 Autosar Classic is running [2025-09-23 17:18:14.113] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:18:14.113] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:18:14.720] INIT: version 2.96 booting [2025-09-23 17:18:14.832] INIT: Entering runlevel: 5 [2025-09-23 17:18:14.992] mtd28 attached [2025-09-23 17:18:15.008] mtd32 attached [2025-09-23 17:18:15.008] mtd24 attached [2025-09-23 17:18:15.024] ubi0:animations is mounted. [2025-09-23 17:18:15.130] RTNETLINK answers: File exists [2025-09-23 17:18:15.130] ubi1:dml_code is mounted. [2025-09-23 17:18:15.130] ubi2:textures is mounted. [2025-09-23 17:18:15.130] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:18:15.130] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:18:15.131] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:18:15.131] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:18:15.131] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:18:15.131] data.LB_FadeInType0=100 [2025-09-23 17:18:15.131] data.CHLH_FadeInType0=0 [2025-09-23 17:18:15.131] data.WU_FadeInDelay=0 [2025-09-23 17:18:15.131] max_time_out=0 [2025-09-23 17:18:15.131] No splash screen [2025-09-23 17:18:15.131] stop dss Done [2025-09-23 17:18:15.159] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:18:15.159] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:18:15.159] /dev/mem opened. [2025-09-23 17:18:15.159] Memory mapped at address 0xffff9bc36000. [2025-09-23 17:18:15.185] Read at address 0x00600018 (0xffff9bc36018): 0x00000000 [2025-09-23 17:18:15.185] Write at address 0x00600018 (0xffff9bc36018): 0x00400040, readback 0x00400040 [2025-09-23 17:18:15.330] Loaded PowerVR consumer services. [2025-09-23 17:18:15.442] Waiting data available... [2025-09-23 17:18:15.474] 512+0 records in [2025-09-23 17:18:15.474] 512+0 records out [2025-09-23 17:18:15.506] Starting syslogd/klogd: done [2025-09-23 17:18:15.522] DML Start [2025-09-23 17:18:15.665] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:18:16.139] DML res1: 0 [2025-09-23 17:18:16.376] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:18:16.376] Read Success [2025-09-23 17:18:16.376] Verifying certificate... [2025-09-23 17:18:16.632] Verified OK [2025-09-23 17:18:16.648] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:18:18.390] Verified OK [2025-09-23 17:18:18.390] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:18:18.993] Verified OK [2025-09-23 17:18:18.993] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:18:21.535] fs.protected_hardlinks = 1 [2025-09-23 17:18:21.535] fs.protected_symlinks = 1 [2025-09-23 17:18:21.551] kernel.modules_disabled = 1 [2025-09-23 17:18:21.759] [2025-09-23 17:18:21.759] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:18:23.047] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:18:30.737] SBL1:1210.0.1.0 [2025-09-23 17:18:30.769] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:18:32.351] SBL2:1210.0.1.0 [2025-09-23 17:18:32.391] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:18:32.496] j-A [2025-09-23 17:18:39.833] The R5 Autosar Classic is running [2025-09-23 17:18:39.864] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:18:39.864] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:18:40.472] INIT: version 2.96 booting [2025-09-23 17:18:40.583] INIT: Entering runlevel: 5 [2025-09-23 17:18:40.874] mtd28 attached [2025-09-23 17:18:40.874] mtd24 attached [2025-09-23 17:18:40.874] mtd32 attached [2025-09-23 17:18:40.875] RTNETLINK answers: File exists [2025-09-23 17:18:40.875] ubi1:textures is mounted. [2025-09-23 17:18:40.875] ubi0:animations is mounted. [2025-09-23 17:18:40.875] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:18:40.875] ubi2:dml_code is mounted. [2025-09-23 17:18:40.875] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:18:40.875] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:18:40.875] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:18:40.875] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:18:40.875] data.LB_FadeInType0=100 [2025-09-23 17:18:40.875] data.CHLH_FadeInType0=0 [2025-09-23 17:18:40.875] data.WU_FadeInDelay=0 [2025-09-23 17:18:40.875] max_time_out=0 [2025-09-23 17:18:40.875] No splash screen [2025-09-23 17:18:40.875] stop dss Done [2025-09-23 17:18:40.912] /dev/mem opened. [2025-09-23 17:18:40.912] Memory mapped at address 0xffff87180000. [2025-09-23 17:18:40.938] Read at address 0x00600018 (0xffff87180018): 0x00000000 [2025-09-23 17:18:40.938] Write at address 0x00600018 (0xffff87180018): 0x00400040, readback 0x00400040 [2025-09-23 17:18:40.938] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:18:40.954] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:18:41.147] Loaded PowerVR consumer services. [2025-09-23 17:18:41.194] 512+0 records in [2025-09-23 17:18:41.194] 512+0 records out [2025-09-23 17:18:41.226] Starting syslogd/klogd: Waiting data available... [2025-09-23 17:18:41.242] done [2025-09-23 17:18:41.242] DML Start [2025-09-23 17:18:41.467] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:18:41.690] DML res1: 0 [2025-09-23 17:18:42.054] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:18:42.054] Read Success [2025-09-23 17:18:42.054] Verifying certificate... [2025-09-23 17:18:42.326] Verified OK [2025-09-23 17:18:42.342] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:18:43.913] Verified OK [2025-09-23 17:18:43.913] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:18:44.557] Verified OK [2025-09-23 17:18:44.557] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:18:47.291] fs.protected_hardlinks = 1 [2025-09-23 17:18:47.307] fs.protected_symlinks = 1 [2025-09-23 17:18:47.307] kernel.modules_disabled = 1 [2025-09-23 17:18:47.514] [2025-09-23 17:18:47.514] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:18:48.774] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:18:56.500] SBL1:1210.0.1.0 [2025-09-23 17:18:56.548] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:18:58.115] SBL2:1210.0.1.0 [2025-09-23 17:18:58.147] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:18:58.259] j-A [2025-09-23 17:19:05.612] The R5 Autosar Classic is running [2025-09-23 17:19:05.612] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:19:05.633] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:19:06.241] INIT: version 2.96 booting [2025-09-23 17:19:06.640] INIT: Entering runlevel: 5 [2025-09-23 17:19:06.640] mtd24 attached [2025-09-23 17:19:06.640] mtd28 attached [2025-09-23 17:19:06.640] mtd32 attached [2025-09-23 17:19:06.640] RTNETLINK answers: File exists [2025-09-23 17:19:06.640] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:19:06.640] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:19:06.640] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:19:06.640] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:19:06.640] ubi1:animations is mounted. [2025-09-23 17:19:06.640] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:19:06.640] ubi0:textures is mounted. [2025-09-23 17:19:06.640] ubi2:dml_code is mounted. [2025-09-23 17:19:06.640] data.LB_FadeInType0=100 [2025-09-23 17:19:06.660] data.CHLH_FadeInType0=0 [2025-09-23 17:19:06.660] data.WU_FadeInDelay=0 [2025-09-23 17:19:06.660] max_time_out=0 [2025-09-23 17:19:06.660] No splash screen [2025-09-23 17:19:06.660] stop dss Done [2025-09-23 17:19:06.660] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:19:06.660] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:19:06.725] /dev/mem opened. [2025-09-23 17:19:06.725] Memory mapped at address 0xffffbb0ae000. [2025-09-23 17:19:06.725] Read at address 0x00600018 (0xffffbb0ae018): 0x00000000 [2025-09-23 17:19:06.725] Write at address 0x00600018 (0xffffbb0ae018): 0x00400040, readback 0x00400040 [2025-09-23 17:19:06.789] Loaded PowerVR consumer services. [2025-09-23 17:19:06.949] 512+0 records in [2025-09-23 17:19:06.949] 512+0 records out [2025-09-23 17:19:06.964] Waiting data available... [2025-09-23 17:19:06.980] Starting syslogd/klogd: done [2025-09-23 17:19:06.997] DML Start [2025-09-23 17:19:07.189] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:19:07.397] DML res1: 0 [2025-09-23 17:19:07.876] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:19:07.892] Read Success [2025-09-23 17:19:07.892] Verifying certificate... [2025-09-23 17:19:08.164] Verified OK [2025-09-23 17:19:08.180] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:19:09.777] Verified OK [2025-09-23 17:19:09.777] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:19:10.393] Verified OK [2025-09-23 17:19:10.393] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:19:13.142] fs.protected_hardlinks = 1 [2025-09-23 17:19:13.169] fs.protected_symlinks = 1 [2025-09-23 17:19:13.169] kernel.modules_disabled = 1 [2025-09-23 17:19:13.361] [2025-09-23 17:19:13.361] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:19:14.490] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:19:22.250] SBL1:1210.0.1.0 [2025-09-23 17:19:22.282] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:19:23.864] SBL2:1210.0.1.0 [2025-09-23 17:19:23.896] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:19:24.008] j-A [2025-09-23 17:19:31.380] The R5 Autosar Classic is running [2025-09-23 17:19:31.380] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:19:31.380] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:19:31.986] INIT: version 2.96 booting [2025-09-23 17:19:32.099] INIT: Entering runlevel: 5 [2025-09-23 17:19:32.422] mtd28 attached [2025-09-23 17:19:32.422] mtd32 attached [2025-09-23 17:19:32.422] mtd24 attached [2025-09-23 17:19:32.422] RTNETLINK answers: File exists [2025-09-23 17:19:32.422] ubi0:animations is mounted. [2025-09-23 17:19:32.422] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:19:32.422] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:19:32.422] ubi2:textures is mounted. [2025-09-23 17:19:32.422] ubi1:dml_code is mounted. [2025-09-23 17:19:32.422] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:19:32.422] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:19:32.422] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:19:32.422] data.LB_FadeInType0=100 [2025-09-23 17:19:32.422] data.CHLH_FadeInType0=0 [2025-09-23 17:19:32.422] data.WU_FadeInDelay=0 [2025-09-23 17:19:32.422] max_time_out=0 [2025-09-23 17:19:32.422] No splash screen [2025-09-23 17:19:32.422] stop dss Done [2025-09-23 17:19:32.469] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:19:32.469] /dev/mem opened. [2025-09-23 17:19:32.469] Memory mapped at address 0xffff8e16f000. [2025-09-23 17:19:32.469] Read at address 0x00600018 (0xffff8e16f018): 0x00000000 [2025-09-23 17:19:32.469] Write at address 0x00600018 (0xffff8e16f018): 0x00400040, readback 0x00400040 [2025-09-23 17:19:32.469] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:19:32.612] Loaded PowerVR consumer services. [2025-09-23 17:19:32.740] Waiting data available... [2025-09-23 17:19:32.757] 512+0 records in [2025-09-23 17:19:32.757] 512+0 records out [2025-09-23 17:19:32.773] Starting syslogd/klogd: done [2025-09-23 17:19:32.805] DML Start [2025-09-23 17:19:32.965] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:19:33.188] DML res1: 0 [2025-09-23 17:19:33.667] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:19:33.683] Read Success [2025-09-23 17:19:33.683] Verifying certificate... [2025-09-23 17:19:33.923] Verified OK [2025-09-23 17:19:33.940] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:19:35.611] Verified OK [2025-09-23 17:19:35.611] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:19:36.256] Verified OK [2025-09-23 17:19:36.256] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:19:38.910] fs.protected_hardlinks = 1 [2025-09-23 17:19:38.926] fs.protected_symlinks = 1 [2025-09-23 17:19:38.926] kernel.modules_disabled = 1 [2025-09-23 17:19:39.119] [2025-09-23 17:19:39.119] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:19:40.301] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:19:48.002] SBL1:1210.0.1.0 [2025-09-23 17:19:48.034] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:19:49.617] SBL2:1210.0.1.0 [2025-09-23 17:19:49.649] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:19:49.761] j-A [2025-09-23 17:19:57.134] The R5 Autosar Classic is running [2025-09-23 17:19:57.134] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:19:57.134] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:19:57.742] INIT: version 2.96 booting [2025-09-23 17:19:57.853] INIT: Entering runlevel: 5 [2025-09-23 17:19:58.187] mtd24 attached [2025-09-23 17:19:58.187] mtd32 attached [2025-09-23 17:19:58.187] mtd28 attached [2025-09-23 17:19:58.187] ubi0:textures is mounted. [2025-09-23 17:19:58.187] RTNETLINK answers: File exists [2025-09-23 17:19:58.187] ubi1:dml_code is mounted. [2025-09-23 17:19:58.187] ubi2:animations is mounted. [2025-09-23 17:19:58.187] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:19:58.187] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:19:58.187] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:19:58.187] data.LB_FadeInType0=100 [2025-09-23 17:19:58.187] data.CHLH_FadeInType0=0 [2025-09-23 17:19:58.187] data.WU_FadeInDelay=0 [2025-09-23 17:19:58.187] max_time_out=0 [2025-09-23 17:19:58.187] No splash screen [2025-09-23 17:19:58.187] stop dss Done [2025-09-23 17:19:58.187] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:19:58.187] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:19:58.187] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:19:58.187] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:19:58.192] /dev/mem opened. [2025-09-23 17:19:58.224] Memory mapped at address 0xffff9a2b8000. [2025-09-23 17:19:58.224] Read at address 0x00600018 (0xffff9a2b8018): 0x00000000 [2025-09-23 17:19:58.224] Write at address 0x00600018 (0xffff9a2b8018): 0x00400040, readback 0x00400040 [2025-09-23 17:19:58.416] Loaded PowerVR consumer services. [2025-09-23 17:19:58.493] Waiting data available... [2025-09-23 17:19:58.493] 512+0 records in [2025-09-23 17:19:58.493] 512+0 records out [2025-09-23 17:19:58.509] Starting syslogd/klogd: done [2025-09-23 17:19:58.525] DML Start [2025-09-23 17:19:58.701] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:19:58.925] DML res1: 0 [2025-09-23 17:19:59.389] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:19:59.410] Read Success [2025-09-23 17:19:59.410] Verifying certificate... [2025-09-23 17:19:59.650] Verified OK [2025-09-23 17:19:59.666] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:20:01.366] Verified OK [2025-09-23 17:20:01.366] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:20:01.962] Verified OK [2025-09-23 17:20:01.962] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:20:04.488] fs.protected_hardlinks = 1 [2025-09-23 17:20:04.504] fs.protected_symlinks = 1 [2025-09-23 17:20:04.504] kernel.modules_disabled = 1 [2025-09-23 17:20:04.680] [2025-09-23 17:20:04.680] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:20:05.966] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:20:13.768] SBL1:1210.0.1.0 [2025-09-23 17:20:13.816] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:20:15.398] SBL2:1210.0.1.0 [2025-09-23 17:20:15.429] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:20:15.542] j-A [2025-09-23 17:20:22.910] The R5 Autosar Classic is running [2025-09-23 17:20:22.910] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:20:22.910] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:20:23.518] INIT: version 2.96 booting [2025-09-23 17:20:23.629] INIT: Entering runlevel: 5 [2025-09-23 17:20:23.968] mtd24 attached [2025-09-23 17:20:23.968] mtd28 attached [2025-09-23 17:20:23.968] ubi0:textures is mounted. [2025-09-23 17:20:23.968] ubi1:animations is mounted. [2025-09-23 17:20:23.968] mtd32 attached [2025-09-23 17:20:23.969] RTNETLINK answers: File exists [2025-09-23 17:20:23.969] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:20:23.969] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:20:23.969] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:20:23.969] ubi2:dml_code is mounted. [2025-09-23 17:20:23.969] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:20:23.969] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:20:23.969] data.LB_FadeInType0=100 [2025-09-23 17:20:23.969] data.CHLH_FadeInType0=0 [2025-09-23 17:20:23.969] data.WU_FadeInDelay=0 [2025-09-23 17:20:23.969] max_time_out=0 [2025-09-23 17:20:23.969] No splash screen [2025-09-23 17:20:23.969] stop dss Done [2025-09-23 17:20:23.969] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:20:23.969] /dev/mem opened. [2025-09-23 17:20:23.969] Memory mapped at address 0xffff9d859000. [2025-09-23 17:20:23.993] Read at address 0x00600018 (0xffff9d859018): 0x00000000 [2025-09-23 17:20:23.993] Write at address 0x00600018 (0xffff9d859018): 0x00400040, readback 0x00400040 [2025-09-23 17:20:23.993] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:20:24.217] Loaded PowerVR consumer services. [2025-09-23 17:20:24.289] 512+0 records in [2025-09-23 17:20:24.289] 512+0 records out [2025-09-23 17:20:24.289] Waiting data available... [2025-09-23 17:20:24.321] Starting syslogd/klogd: done [2025-09-23 17:20:24.337] DML Start [2025-09-23 17:20:24.497] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:20:24.689] DML res1: 0 [2025-09-23 17:20:25.145] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:20:25.145] Read Success [2025-09-23 17:20:25.145] Verifying certificate... [2025-09-23 17:20:25.400] Verified OK [2025-09-23 17:20:25.416] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:20:27.122] Verified OK [2025-09-23 17:20:27.122] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:20:27.744] Verified OK [2025-09-23 17:20:27.744] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:20:30.430] fs.protected_hardlinks = 1 [2025-09-23 17:20:30.430] fs.protected_symlinks = 1 [2025-09-23 17:20:30.446] kernel.modules_disabled = 1 [2025-09-23 17:20:30.653] [2025-09-23 17:20:30.653] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:20:31.850] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:20:39.522] SBL1:1210.0.1.0 [2025-09-23 17:20:39.570] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:20:41.137] SBL2:1210.0.1.0 [2025-09-23 17:20:41.185] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:20:41.282] j-A [2025-09-23 17:20:48.634] The R5 Autosar Classic is running [2025-09-23 17:20:48.657] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:20:48.657] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:20:49.265] INIT: version 2.96 booting [2025-09-23 17:20:49.671] INIT: Entering runlevel: 5 [2025-09-23 17:20:49.671] mtd24 attached [2025-09-23 17:20:49.671] mtd28 attached [2025-09-23 17:20:49.671] mtd32 attached [2025-09-23 17:20:49.671] RTNETLINK answers: File exists [2025-09-23 17:20:49.671] ubi0:textures is mounted. [2025-09-23 17:20:49.671] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:20:49.671] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:20:49.671] ubi1:animations is mounted. [2025-09-23 17:20:49.671] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:20:49.671] ubi2:dml_code is mounted. [2025-09-23 17:20:49.671] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:20:49.671] data.LB_FadeInType0=100 [2025-09-23 17:20:49.671] data.CHLH_FadeInType0=0 [2025-09-23 17:20:49.671] data.WU_FadeInDelay=0 [2025-09-23 17:20:49.671] max_time_out=0 [2025-09-23 17:20:49.671] No splash screen [2025-09-23 17:20:49.671] stop dss Done [2025-09-23 17:20:49.671] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:20:49.716] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:20:49.716] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:20:49.716] /dev/mem opened. [2025-09-23 17:20:49.716] Memory mapped at address 0xffff87c06000. [2025-09-23 17:20:49.742] Read at address 0x00600018 (0xffff87c06018): 0x00000000 [2025-09-23 17:20:49.742] Write at address 0x00600018 (0xffff87c06018): 0x00400040, readback 0x00400040 [2025-09-23 17:20:49.951] Loaded PowerVR consumer services. [2025-09-23 17:20:50.029] Waiting data available... [2025-09-23 17:20:50.029] 512+0 records in [2025-09-23 17:20:50.029] 512+0 records out [2025-09-23 17:20:50.061] Starting syslogd/klogd: done [2025-09-23 17:20:50.093] DML Start [2025-09-23 17:20:50.236] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:20:50.687] DML res1: 0 [2025-09-23 17:20:50.908] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:20:50.924] Read Success [2025-09-23 17:20:50.924] Verifying certificate... [2025-09-23 17:20:51.228] Verified OK [2025-09-23 17:20:51.260] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:20:52.922] Verified OK [2025-09-23 17:20:52.922] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:20:53.454] Verified OK [2025-09-23 17:20:53.454] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:20:55.979] fs.protected_hardlinks = 1 [2025-09-23 17:20:55.995] fs.protected_symlinks = 1 [2025-09-23 17:20:55.995] kernel.modules_disabled = 1 [2025-09-23 17:20:56.187] [2025-09-23 17:20:56.187] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:20:57.540] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:21:05.286] SBL1:1210.0.1.0 [2025-09-23 17:21:05.334] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:21:06.901] SBL2:1210.0.1.0 [2025-09-23 17:21:06.949] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:21:07.061] j-A [2025-09-23 17:21:14.398] The R5 Autosar Classic is running [2025-09-23 17:21:14.429] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:21:14.429] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:21:15.037] INIT: version 2.96 booting [2025-09-23 17:21:15.148] INIT: Entering runlevel: 5 [2025-09-23 17:21:15.292] mtd24 attached [2025-09-23 17:21:15.308] mtd28 attached [2025-09-23 17:21:15.324] mtd32 attached [2025-09-23 17:21:15.447] ubi0:textures is mounted. [2025-09-23 17:21:15.448] RTNETLINK answers: File exists [2025-09-23 17:21:15.448] ubi1:animations is mounted. [2025-09-23 17:21:15.448] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:21:15.448] ubi2:dml_code is mounted. [2025-09-23 17:21:15.448] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:21:15.448] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:21:15.448] data.LB_FadeInType0=100 [2025-09-23 17:21:15.448] data.CHLH_FadeInType0=0 [2025-09-23 17:21:15.448] data.WU_FadeInDelay=0 [2025-09-23 17:21:15.448] max_time_out=0 [2025-09-23 17:21:15.448] No splash screen [2025-09-23 17:21:15.448] stop dss Done [2025-09-23 17:21:15.448] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:21:15.448] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:21:15.469] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:21:15.469] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:21:15.469] /dev/mem opened. [2025-09-23 17:21:15.501] Memory mapped at address 0xffff90a43000. [2025-09-23 17:21:15.501] Read at address 0x00600018 (0xffff90a43018): 0x00000000 [2025-09-23 17:21:15.501] Write at address 0x00600018 (0xffff90a43018): 0x00400040, readback 0x00400040 [2025-09-23 17:21:15.597] Loaded PowerVR consumer services. [2025-09-23 17:21:15.754] 512+0 records in [2025-09-23 17:21:15.754] 512+0 records out [2025-09-23 17:21:15.754] Waiting data available... [2025-09-23 17:21:15.786] Starting syslogd/klogd: done [2025-09-23 17:21:15.802] DML Start [2025-09-23 17:21:16.010] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:21:16.234] DML res1: 0 [2025-09-23 17:21:16.601] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:21:16.622] Read Success [2025-09-23 17:21:16.622] Verifying certificate... [2025-09-23 17:21:16.861] Verified OK [2025-09-23 17:21:16.877] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:21:18.572] Verified OK [2025-09-23 17:21:18.611] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:21:19.151] Verified OK [2025-09-23 17:21:19.151] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:21:21.854] fs.protected_hardlinks = 1 [2025-09-23 17:21:21.854] fs.protected_symlinks = 1 [2025-09-23 17:21:21.870] kernel.modules_disabled = 1 [2025-09-23 17:21:22.061] [2025-09-23 17:21:22.061] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:21:23.292] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:21:31.030] SBL1:1210.0.1.0 [2025-09-23 17:21:31.078] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:21:32.645] SBL2:1210.0.1.0 [2025-09-23 17:21:32.693] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:21:32.805] j-A [2025-09-23 17:21:40.143] The R5 Autosar Classic is running [2025-09-23 17:21:40.174] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:21:40.174] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:21:40.782] INIT: version 2.96 booting [2025-09-23 17:21:40.894] INIT: Entering runlevel: 5 [2025-09-23 17:21:41.037] mtd24 attached [2025-09-23 17:21:41.053] mtd32 attached [2025-09-23 17:21:41.070] mtd28 attached [2025-09-23 17:21:41.192] ubi0:textures is mounted. [2025-09-23 17:21:41.193] RTNETLINK answers: File exists [2025-09-23 17:21:41.193] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:21:41.193] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:21:41.193] ubi2:animations is mounted. [2025-09-23 17:21:41.193] ubi1:dml_code is mounted. [2025-09-23 17:21:41.193] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:21:41.193] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:21:41.193] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:21:41.193] data.LB_FadeInType0=100 [2025-09-23 17:21:41.193] data.CHLH_FadeInType0=0 [2025-09-23 17:21:41.193] data.WU_FadeInDelay=0 [2025-09-23 17:21:41.193] max_time_out=0 [2025-09-23 17:21:41.193] No splash screen [2025-09-23 17:21:41.193] stop dss Done [2025-09-23 17:21:41.263] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:21:41.263] /dev/mem opened. [2025-09-23 17:21:41.263] Memory mapped at address 0xffff80bd1000. [2025-09-23 17:21:41.263] Read at address 0x00600018 (0xffff80bd1018): 0x00000000 [2025-09-23 17:21:41.263] Write at address 0x00600018 (0xffff80bd1018): 0x00400040, readback 0x00400040 [2025-09-23 17:21:41.263] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:21:41.455] Loaded PowerVR consumer services. [2025-09-23 17:21:41.487] Waiting data available... [2025-09-23 17:21:41.519] 512+0 records in [2025-09-23 17:21:41.519] 512+0 records out [2025-09-23 17:21:41.567] Starting syslogd/klogd: done [2025-09-23 17:21:41.583] DML Start [2025-09-23 17:21:41.727] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:21:41.951] DML res1: 0 [2025-09-23 17:21:42.467] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:21:42.467] Read Success [2025-09-23 17:21:42.467] Verifying certificate... [2025-09-23 17:21:42.771] Verified OK [2025-09-23 17:21:42.787] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:21:44.223] Verified OK [2025-09-23 17:21:44.223] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:21:44.863] Verified OK [2025-09-23 17:21:44.863] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:21:47.693] fs.protected_hardlinks = 1 [2025-09-23 17:21:47.693] fs.protected_symlinks = 1 [2025-09-23 17:21:47.709] kernel.modules_disabled = 1 [2025-09-23 17:21:47.916] [2025-09-23 17:21:47.916] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:21:49.081] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:21:56.790] SBL1:1210.0.1.0 [2025-09-23 17:21:56.838] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:21:58.405] SBL2:1210.0.1.0 [2025-09-23 17:21:58.455] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:21:58.549] j-A [2025-09-23 17:22:05.903] The R5 Autosar Classic is running [2025-09-23 17:22:05.903] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:22:05.924] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:22:06.532] INIT: version 2.96 booting [2025-09-23 17:22:06.643] INIT: Entering runlevel: 5 [2025-09-23 17:22:06.804] mtd32 attached [2025-09-23 17:22:06.820] mtd28 attached [2025-09-23 17:22:06.836] mtd24 attached [2025-09-23 17:22:06.942] ubi0:dml_code is mounted. [2025-09-23 17:22:06.943] RTNETLINK answers: File exists [2025-09-23 17:22:06.943] ubi1:animations is mounted. [2025-09-23 17:22:06.943] ubi2:textures is mounted. [2025-09-23 17:22:06.943] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:22:06.943] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:22:06.943] data.LB_FadeInType0=100 [2025-09-23 17:22:06.943] data.CHLH_FadeInType0=0 [2025-09-23 17:22:06.943] data.WU_FadeInDelay=0 [2025-09-23 17:22:06.943] max_time_out=0 [2025-09-23 17:22:06.943] No splash screen [2025-09-23 17:22:06.943] stop dss Done [2025-09-23 17:22:06.943] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:22:06.943] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:22:06.943] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:22:06.996] /dev/mem opened. [2025-09-23 17:22:06.996] Memory mapped at address 0xffffb71d1000. [2025-09-23 17:22:06.996] Read at address 0x00600018 (0xffffb71d1018): 0x00000000 [2025-09-23 17:22:06.996] Write at address 0x00600018 (0xffffb71d1018): 0x00400040, readback 0x00400040 [2025-09-23 17:22:06.996] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:22:07.012] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:22:07.140] Loaded PowerVR consumer services. [2025-09-23 17:22:07.283] Waiting data available... [2025-09-23 17:22:07.283] 512+0 records in [2025-09-23 17:22:07.283] 512+0 records out [2025-09-23 17:22:07.314] Starting syslogd/klogd: done [2025-09-23 17:22:07.346] DML Start [2025-09-23 17:22:07.523] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:22:07.953] DML res1: 0 [2025-09-23 17:22:08.178] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:22:08.194] Read Success [2025-09-23 17:22:08.194] Verifying certificate... [2025-09-23 17:22:08.481] Verified OK [2025-09-23 17:22:08.498] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:22:10.048] Verified OK [2025-09-23 17:22:10.080] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:22:10.720] Verified OK [2025-09-23 17:22:10.736] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:22:13.357] fs.protected_hardlinks = 1 [2025-09-23 17:22:13.373] fs.protected_symlinks = 1 [2025-09-23 17:22:13.373] kernel.modules_disabled = 1 [2025-09-23 17:22:13.582] [2025-09-23 17:22:13.582] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:22:14.736] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:22:22.521] SBL1:1210.0.1.0 [2025-09-23 17:22:22.569] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:22:24.137] SBL2:1210.0.1.0 [2025-09-23 17:22:24.184] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:22:24.296] j-A [2025-09-23 17:22:31.634] The R5 Autosar Classic is running [2025-09-23 17:22:31.659] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:22:31.659] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:22:32.267] INIT: version 2.96 booting [2025-09-23 17:22:32.703] INIT: Entering runlevel: 5 [2025-09-23 17:22:32.703] mtd24 attached [2025-09-23 17:22:32.703] mtd32 attached [2025-09-23 17:22:32.703] mtd28 attached [2025-09-23 17:22:32.703] ubi0:textures is mounted. [2025-09-23 17:22:32.703] RTNETLINK answers: File exists [2025-09-23 17:22:32.703] ubi2:animations is mounted. [2025-09-23 17:22:32.703] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:22:32.703] ubi1:dml_code is mounted. [2025-09-23 17:22:32.703] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:22:32.703] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:22:32.703] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:22:32.703] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:22:32.703] data.LB_FadeInType0=100 [2025-09-23 17:22:32.703] data.CHLH_FadeInType0=0 [2025-09-23 17:22:32.703] data.WU_FadeInDelay=0 [2025-09-23 17:22:32.703] max_time_out=0 [2025-09-23 17:22:32.703] No splash screen [2025-09-23 17:22:32.703] stop dss Done [2025-09-23 17:22:32.758] /dev/mem opened. [2025-09-23 17:22:32.758] Memory mapped at address 0xffff9d024000. [2025-09-23 17:22:32.758] Read at address 0x00600018 (0xffff9d024018): 0x00000000 [2025-09-23 17:22:32.758] Write at address 0x00600018 (0xffff9d024018): 0x00400040, readback 0x00400040 [2025-09-23 17:22:32.758] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:22:32.758] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:22:32.886] Loaded PowerVR consumer services. [2025-09-23 17:22:32.997] Waiting data available... [2025-09-23 17:22:33.013] 512+0 records in [2025-09-23 17:22:33.013] 512+0 records out [2025-09-23 17:22:33.029] Starting syslogd/klogd: done [2025-09-23 17:22:33.045] DML Start [2025-09-23 17:22:33.222] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:22:33.719] DML res1: 0 [2025-09-23 17:22:33.918] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:22:33.918] Read Success [2025-09-23 17:22:33.918] Verifying certificate... [2025-09-23 17:22:34.157] Verified OK [2025-09-23 17:22:34.174] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:22:36.012] Verified OK [2025-09-23 17:22:36.012] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:22:36.524] Verified OK [2025-09-23 17:22:36.540] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:22:38.969] fs.protected_hardlinks = 1 [2025-09-23 17:22:38.998] fs.protected_symlinks = 1 [2025-09-23 17:22:38.998] kernel.modules_disabled = 1 [2025-09-23 17:22:39.173] [2025-09-23 17:22:39.173] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:22:40.508] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:22:48.263] SBL1:1210.0.1.0 [2025-09-23 17:22:48.311] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:22:49.877] SBL2:1210.0.1.0 [2025-09-23 17:22:49.925] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:22:50.036] j-A [2025-09-23 17:22:57.376] The R5 Autosar Classic is running [2025-09-23 17:22:57.401] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:22:57.401] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:22:58.008] INIT: version 2.96 booting [2025-09-23 17:22:58.120] INIT: Entering runlevel: 5 [2025-09-23 17:22:58.438] mtd24 attached [2025-09-23 17:22:58.438] mtd32 attached [2025-09-23 17:22:58.438] mtd28 attached [2025-09-23 17:22:58.438] ubi0:textures is mounted. [2025-09-23 17:22:58.438] RTNETLINK answers: File exists [2025-09-23 17:22:58.439] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:22:58.439] ubi2:animations is mounted. [2025-09-23 17:22:58.439] ubi1:dml_code is mounted. [2025-09-23 17:22:58.439] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:22:58.439] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:22:58.439] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:22:58.439] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:22:58.439] data.LB_FadeInType0=100 [2025-09-23 17:22:58.439] data.CHLH_FadeInType0=0 [2025-09-23 17:22:58.439] data.WU_FadeInDelay=0 [2025-09-23 17:22:58.439] max_time_out=0 [2025-09-23 17:22:58.439] No splash screen [2025-09-23 17:22:58.439] stop dss Done [2025-09-23 17:22:58.464] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:22:58.501] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:22:58.501] /dev/mem opened. [2025-09-23 17:22:58.501] Memory mapped at address 0xffff8ee44000. [2025-09-23 17:22:58.501] Read at address 0x00600018 (0xffff8ee44018): 0x00000000 [2025-09-23 17:22:58.501] Write at address 0x00600018 (0xffff8ee44018): 0x00400040, readback 0x00400040 [2025-09-23 17:22:58.693] Loaded PowerVR consumer services. [2025-09-23 17:22:58.740] 512+0 records in [2025-09-23 17:22:58.740] 512+0 records out [2025-09-23 17:22:58.772] Waiting data available... [2025-09-23 17:22:58.788] Starting syslogd/klogd: done [2025-09-23 17:22:58.820] DML Start [2025-09-23 17:22:58.996] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:22:59.235] DML res1: 0 [2025-09-23 17:22:59.667] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:22:59.688] Read Success [2025-09-23 17:22:59.688] Verifying certificate... [2025-09-23 17:22:59.960] Verified OK [2025-09-23 17:22:59.976] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:23:01.670] Verified OK [2025-09-23 17:23:01.670] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:23:02.317] Verified OK [2025-09-23 17:23:02.317] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:23:04.938] fs.protected_hardlinks = 1 [2025-09-23 17:23:04.938] fs.protected_symlinks = 1 [2025-09-23 17:23:04.957] kernel.modules_disabled = 1 [2025-09-23 17:23:05.145] [2025-09-23 17:23:05.145] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:23:06.329] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:23:14.358] SBL1:1210.0.1.0 [2025-09-23 17:23:14.390] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:23:15.973] SBL2:1210.0.1.0 [2025-09-23 17:23:16.005] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:23:16.116] j-A [2025-09-23 17:23:23.490] The R5 Autosar Classic is running [2025-09-23 17:23:23.490] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:23:23.490] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:23:24.098] INIT: version 2.96 booting [2025-09-23 17:23:24.209] INIT: Entering runlevel: 5 [2025-09-23 17:23:24.369] mtd32 attached [2025-09-23 17:23:24.369] mtd28 attached [2025-09-23 17:23:24.385] mtd24 attached [2025-09-23 17:23:24.433] ubi0:dml_code is mounted. [2025-09-23 17:23:24.433] RTNETLINK answers: File exists [2025-09-23 17:23:24.471] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:23:24.471] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:23:24.471] ubi1:animations is mounted. [2025-09-23 17:23:24.471] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:23:24.471] ubi2:textures is mounted. [2025-09-23 17:23:24.471] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:23:24.471] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:23:24.498] data.LB_FadeInType0=100 [2025-09-23 17:23:24.498] data.CHLH_FadeInType0=0 [2025-09-23 17:23:24.498] data.WU_FadeInDelay=0 [2025-09-23 17:23:24.498] max_time_out=0 [2025-09-23 17:23:24.498] No splash screen [2025-09-23 17:23:24.498] stop dss Done [2025-09-23 17:23:24.591] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:23:24.591] /dev/mem opened. [2025-09-23 17:23:24.591] Memory mapped at address 0xffff9e676000. [2025-09-23 17:23:24.591] Read at address 0x00600018 (0xffff9e676018): 0x00000000 [2025-09-23 17:23:24.591] Write at address 0x00600018 (0xffff9e676018): 0x00400040, readback 0x00400040 [2025-09-23 17:23:24.591] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:23:24.783] Loaded PowerVR consumer services. [2025-09-23 17:23:24.815] Waiting data available... [2025-09-23 17:23:24.831] 512+0 records in [2025-09-23 17:23:24.831] 512+0 records out [2025-09-23 17:23:24.879] Starting syslogd/klogd: done [2025-09-23 17:23:24.895] DML Start [2025-09-23 17:23:25.055] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:23:25.246] DML res1: 0 [2025-09-23 17:23:25.741] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:23:25.741] Read Success [2025-09-23 17:23:25.741] Verifying certificate... [2025-09-23 17:23:25.981] Verified OK [2025-09-23 17:23:25.996] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:23:27.539] Verified OK [2025-09-23 17:23:27.539] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:23:28.217] Verified OK [2025-09-23 17:23:28.217] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:23:30.981] fs.protected_hardlinks = 1 [2025-09-23 17:23:30.981] fs.protected_symlinks = 1 [2025-09-23 17:23:30.981] kernel.modules_disabled = 1 [2025-09-23 17:23:31.157] [2025-09-23 17:23:31.157] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:23:32.366] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:23:40.128] SBL1:1210.0.1.0 [2025-09-23 17:23:40.176] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:23:41.743] SBL2:1210.0.1.0 [2025-09-23 17:23:41.791] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:23:41.887] j-A [2025-09-23 17:23:49.241] The R5 Autosar Classic is running [2025-09-23 17:23:49.262] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:23:49.262] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:23:49.870] INIT: version 2.96 booting [2025-09-23 17:23:50.281] INIT: Entering runlevel: 5 [2025-09-23 17:23:50.281] mtd24 attached [2025-09-23 17:23:50.281] mtd32 attached [2025-09-23 17:23:50.281] ubi0:textures is mounted. [2025-09-23 17:23:50.281] mtd28 attached [2025-09-23 17:23:50.281] ubi1:dml_code is mounted. [2025-09-23 17:23:50.281] RTNETLINK answers: File exists [2025-09-23 17:23:50.281] ubi2:animations is mounted. [2025-09-23 17:23:50.281] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:23:50.281] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:23:50.281] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:23:50.281] data.LB_FadeInType0=100 [2025-09-23 17:23:50.281] data.CHLH_FadeInType0=0 [2025-09-23 17:23:50.281] data.WU_FadeInDelay=0 [2025-09-23 17:23:50.281] max_time_out=0 [2025-09-23 17:23:50.281] No splash screen [2025-09-23 17:23:50.281] stop dss Done [2025-09-23 17:23:50.281] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:23:50.281] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:23:50.308] /dev/mem opened. [2025-09-23 17:23:50.308] Memory mapped at address 0xffffb6914000. [2025-09-23 17:23:50.350] Read at address 0x00600018 (0xffffb6914018): 0x00000000 [2025-09-23 17:23:50.350] Write at address 0x00600018 (0xffffb6914018): 0x00400040, readback 0x00400040 [2025-09-23 17:23:50.350] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:23:50.350] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:23:50.509] Loaded PowerVR consumer services. [2025-09-23 17:23:50.605] Waiting data available... [2025-09-23 17:23:50.621] 512+0 records in [2025-09-23 17:23:50.621] 512+0 records out [2025-09-23 17:23:50.653] Starting syslogd/klogd: done [2025-09-23 17:23:50.669] DML Start [2025-09-23 17:23:50.862] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:23:51.101] DML res1: 0 [2025-09-23 17:23:51.500] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:23:51.500] Read Success [2025-09-23 17:23:51.500] Verifying certificate... [2025-09-23 17:23:51.723] Verified OK [2025-09-23 17:23:51.739] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:23:53.434] Verified OK [2025-09-23 17:23:53.434] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:23:54.021] Verified OK [2025-09-23 17:23:54.022] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:23:56.643] fs.protected_hardlinks = 1 [2025-09-23 17:23:56.643] fs.protected_symlinks = 1 [2025-09-23 17:23:56.659] kernel.modules_disabled = 1 [2025-09-23 17:23:56.851] [2025-09-23 17:23:56.851] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:23:58.183] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:24:06.155] SBL1:1210.0.1.0 [2025-09-23 17:24:06.203] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:24:07.770] SBL2:1210.0.1.0 [2025-09-23 17:24:08.002] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:24:08.002] j-A [2025-09-23 17:24:15.268] The R5 Autosar Classic is running [2025-09-23 17:24:15.291] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:24:15.291] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:24:15.898] INIT: version 2.96 booting [2025-09-23 17:24:16.314] INIT: Entering runlevel: 5 [2025-09-23 17:24:16.314] mtd24 attached [2025-09-23 17:24:16.314] mtd28 attached [2025-09-23 17:24:16.314] mtd32 attached [2025-09-23 17:24:16.314] RTNETLINK answers: File exists [2025-09-23 17:24:16.314] ubi0:textures is mounted. [2025-09-23 17:24:16.314] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:24:16.314] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:24:16.314] ubi1:animations is mounted. [2025-09-23 17:24:16.314] ubi2:dml_code is mounted. [2025-09-23 17:24:16.314] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:24:16.314] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:24:16.314] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:24:16.314] data.LB_FadeInType0=100 [2025-09-23 17:24:16.314] data.CHLH_FadeInType0=0 [2025-09-23 17:24:16.314] data.WU_FadeInDelay=0 [2025-09-23 17:24:16.314] max_time_out=0 [2025-09-23 17:24:16.314] No splash screen [2025-09-23 17:24:16.314] stop dss Done [2025-09-23 17:24:16.333] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:24:16.349] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:24:16.384] /dev/mem opened. [2025-09-23 17:24:16.384] Memory mapped at address 0xffffb6993000. [2025-09-23 17:24:16.384] Read at address 0x00600018 (0xffffb6993018): 0x00000000 [2025-09-23 17:24:16.384] Write at address 0x00600018 (0xffffb6993018): 0x00400040, readback 0x00400040 [2025-09-23 17:24:16.464] Loaded PowerVR consumer services. [2025-09-23 17:24:16.608] Waiting data available... [2025-09-23 17:24:16.641] 512+0 records in [2025-09-23 17:24:16.641] 512+0 records out [2025-09-23 17:24:16.656] Starting syslogd/klogd: done [2025-09-23 17:24:16.672] DML Start [2025-09-23 17:24:16.864] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:24:17.087] DML res1: 0 [2025-09-23 17:24:17.520] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:24:17.540] Read Success [2025-09-23 17:24:17.540] Verifying certificate... [2025-09-23 17:24:17.781] Verified OK [2025-09-23 17:24:17.797] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:24:19.470] Verified OK [2025-09-23 17:24:19.470] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:24:20.089] Verified OK [2025-09-23 17:24:20.089] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:24:22.627] fs.protected_hardlinks = 1 [2025-09-23 17:24:22.627] fs.protected_symlinks = 1 [2025-09-23 17:24:22.627] kernel.modules_disabled = 1 [2025-09-23 17:24:22.803] [2025-09-23 17:24:22.803] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:24:24.175] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:24:31.917] SBL1:1210.0.1.0 [2025-09-23 17:24:31.949] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:24:33.533] SBL2:1210.0.1.0 [2025-09-23 17:24:33.581] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:24:33.676] j-A [2025-09-23 17:24:41.051] The R5 Autosar Classic is running [2025-09-23 17:24:41.051] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:24:41.051] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:24:41.658] INIT: version 2.96 booting [2025-09-23 17:24:42.094] INIT: Entering runlevel: 5 [2025-09-23 17:24:42.094] mtd24 attached [2025-09-23 17:24:42.094] mtd28 attached [2025-09-23 17:24:42.094] mtd32 attached [2025-09-23 17:24:42.094] RTNETLINK answers: File exists [2025-09-23 17:24:42.094] ubi0:textures is mounted. [2025-09-23 17:24:42.094] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:24:42.094] ubi1:animations is mounted. [2025-09-23 17:24:42.094] ubi2:dml_code is mounted. [2025-09-23 17:24:42.094] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:24:42.094] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:24:42.094] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:24:42.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:24:42.094] data.LB_FadeInType0=100 [2025-09-23 17:24:42.094] data.CHLH_FadeInType0=0 [2025-09-23 17:24:42.094] data.WU_FadeInDelay=0 [2025-09-23 17:24:42.094] max_time_out=0 [2025-09-23 17:24:42.094] No splash screen [2025-09-23 17:24:42.094] stop dss Done [2025-09-23 17:24:42.097] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:24:42.097] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:24:42.134] /dev/mem opened. [2025-09-23 17:24:42.134] Memory mapped at address 0xffff94fc2000. [2025-09-23 17:24:42.134] Read at address 0x00600018 (0xffff94fc2018): 0x00000000 [2025-09-23 17:24:42.134] Write at address 0x00600018 (0xffff94fc2018): 0x00400040, readback 0x00400040 [2025-09-23 17:24:42.326] Loaded PowerVR consumer services. [2025-09-23 17:24:42.374] Waiting data available... [2025-09-23 17:24:42.390] 512+0 records in [2025-09-23 17:24:42.390] 512+0 records out [2025-09-23 17:24:42.454] Starting syslogd/klogd: done [2025-09-23 17:24:42.470] DML Start [2025-09-23 17:24:42.646] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:24:42.870] DML res1: 0 [2025-09-23 17:24:43.294] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:24:43.294] Read Success [2025-09-23 17:24:43.294] Verifying certificate... [2025-09-23 17:24:43.517] Verified OK [2025-09-23 17:24:43.533] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:24:45.278] Verified OK [2025-09-23 17:24:45.278] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:24:45.842] Verified OK [2025-09-23 17:24:45.842] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:24:48.320] fs.protected_hardlinks = 1 [2025-09-23 17:24:48.336] fs.protected_symlinks = 1 [2025-09-23 17:24:48.336] kernel.modules_disabled = 1 [2025-09-23 17:24:48.560] [2025-09-23 17:24:48.560] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:24:49.916] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:24:57.676] SBL1:1210.0.1.0 [2025-09-23 17:24:57.724] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:24:59.291] SBL2:1210.0.1.0 [2025-09-23 17:24:59.339] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 17:24:59.435] j-A [2025-09-23 17:25:06.789] The R5 Autosar Classic is running [2025-09-23 17:25:06.811] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:25:06.811] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:25:07.419] INIT: version 2.96 booting [2025-09-23 17:25:07.531] INIT: Entering runlevel: 5 [2025-09-23 17:25:07.690] mtd28 attached [2025-09-23 17:25:07.690] mtd24 attached [2025-09-23 17:25:07.706] mtd32 attached [2025-09-23 17:25:07.739] ubi0:animations is mounted. [2025-09-23 17:25:07.861] RTNETLINK answers: File exists [2025-09-23 17:25:07.861] ubi2:dml_code is mounted. [2025-09-23 17:25:07.861] ubi1:textures is mounted. [2025-09-23 17:25:07.861] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:25:07.862] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:25:07.862] data.LB_FadeInType0=100 [2025-09-23 17:25:07.862] data.CHLH_FadeInType0=0 [2025-09-23 17:25:07.862] data.WU_FadeInDelay=0 [2025-09-23 17:25:07.862] max_time_out=0 [2025-09-23 17:25:07.862] No splash screen [2025-09-23 17:25:07.862] stop dss Done [2025-09-23 17:25:07.862] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:25:07.862] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:25:07.862] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:25:07.862] /dev/mem opened. [2025-09-23 17:25:07.862] Memory mapped at address 0xffff948d6000. [2025-09-23 17:25:07.899] Read at address 0x00600018 (0xffff948d6018): 0x00000000 [2025-09-23 17:25:07.899] Write at address 0x00600018 (0xffff948d6018): 0x00400040, readback 0x00400040 [2025-09-23 17:25:07.899] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:25:07.899] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:25:08.011] Loaded PowerVR consumer services. [2025-09-23 17:25:08.170] Waiting data available... [2025-09-23 17:25:08.170] 512+0 records in [2025-09-23 17:25:08.170] 512+0 records out [2025-09-23 17:25:08.201] Starting syslogd/klogd: done [2025-09-23 17:25:08.218] DML Start [2025-09-23 17:25:08.410] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:25:08.632] DML res1: 0 [2025-09-23 17:25:09.120] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:25:09.120] Read Success [2025-09-23 17:25:09.120] Verifying certificate... [2025-09-23 17:25:09.360] Verified OK [2025-09-23 17:25:09.376] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:25:11.006] Verified OK [2025-09-23 17:25:11.006] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:25:11.686] Verified OK [2025-09-23 17:25:11.686] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:25:14.324] fs.protected_hardlinks = 1 [2025-09-23 17:25:14.340] fs.protected_symlinks = 1 [2025-09-23 17:25:14.340] kernel.modules_disabled = 1 [2025-09-23 17:25:14.548] [2025-09-23 17:25:14.548] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:25:15.715] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:25:23.424] SBL1:1210.0.1.0 [2025-09-23 17:25:23.456] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:25:25.038] SBL2:1210.0.1.0 [2025-09-23 17:25:25.081] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:25:25.181] j-A [2025-09-23 17:25:32.554] The R5 Autosar Classic is running [2025-09-23 17:25:32.554] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:25:32.554] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:25:33.161] INIT: version 2.96 booting [2025-09-23 17:25:33.273] INIT: Entering runlevel: 5 [2025-09-23 17:25:33.433] mtd28 attached [2025-09-23 17:25:33.433] mtd24 attached [2025-09-23 17:25:33.449] mtd32 attached [2025-09-23 17:25:33.497] ubi0:animations is mounted. [2025-09-23 17:25:33.497] ubi1:textures is mounted. [2025-09-23 17:25:33.513] RTNETLINK answers: File exists [2025-09-23 17:25:33.513] ubi2:dml_code is mounted. [2025-09-23 17:25:33.565] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:25:33.565] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:25:33.565] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:25:33.565] data.LB_FadeInType0=100 [2025-09-23 17:25:33.565] data.CHLH_FadeInType0=0 [2025-09-23 17:25:33.565] data.WU_FadeInDelay=0 [2025-09-23 17:25:33.565] max_time_out=0 [2025-09-23 17:25:33.565] No splash screen [2025-09-23 17:25:33.565] stop dss Done [2025-09-23 17:25:33.565] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:25:33.565] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:25:33.597] /dev/mem opened. [2025-09-23 17:25:33.597] Memory mapped at address 0xffffb38a9000. [2025-09-23 17:25:33.623] Read at address 0x00600018 (0xffffb38a9018): 0x00000000 [2025-09-23 17:25:33.623] Write at address 0x00600018 (0xffffb38a9018): 0x00400040, readback 0x00400040 [2025-09-23 17:25:33.666] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:25:33.666] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:25:33.730] Loaded PowerVR consumer services. [2025-09-23 17:25:33.904] 512+0 records in [2025-09-23 17:25:33.904] 512+0 records out [2025-09-23 17:25:33.904] Waiting data available... [2025-09-23 17:25:33.936] Starting syslogd/klogd: done [2025-09-23 17:25:33.952] DML Start [2025-09-23 17:25:34.096] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:25:34.303] DML res1: 0 [2025-09-23 17:25:34.784] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:25:34.784] Read Success [2025-09-23 17:25:34.800] Verifying certificate... [2025-09-23 17:25:35.039] Verified OK [2025-09-23 17:25:35.071] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:25:36.782] Verified OK [2025-09-23 17:25:36.782] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:25:37.381] Verified OK [2025-09-23 17:25:37.381] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:25:40.051] fs.protected_hardlinks = 1 [2025-09-23 17:25:40.051] fs.protected_symlinks = 1 [2025-09-23 17:25:40.066] kernel.modules_disabled = 1 [2025-09-23 17:25:40.258] [2025-09-23 17:25:40.258] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:25:41.454] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:25:49.134] SBL1:1210.0.1.0 [2025-09-23 17:25:49.182] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:25:50.749] SBL2:1210.0.1.0 [2025-09-23 17:25:50.798] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:25:50.893] j-A [2025-09-23 17:25:58.248] The R5 Autosar Classic is running [2025-09-23 17:25:58.270] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:25:58.270] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:25:58.878] INIT: version 2.96 booting [2025-09-23 17:25:58.990] INIT: Entering runlevel: 5 [2025-09-23 17:25:59.149] mtd24 attached [2025-09-23 17:25:59.149] mtd28 attached [2025-09-23 17:25:59.165] mtd32 attached [2025-09-23 17:25:59.198] ubi0:textures is mounted. [2025-09-23 17:25:59.278] RTNETLINK answers: File exists [2025-09-23 17:25:59.278] ubi1:animations is mounted. [2025-09-23 17:25:59.278] ubi2:dml_code is mounted. [2025-09-23 17:25:59.278] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:25:59.278] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:25:59.278] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:25:59.278] data.LB_FadeInType0=100 [2025-09-23 17:25:59.278] data.CHLH_FadeInType0=0 [2025-09-23 17:25:59.278] data.WU_FadeInDelay=0 [2025-09-23 17:25:59.278] max_time_out=0 [2025-09-23 17:25:59.278] No splash screen [2025-09-23 17:25:59.278] stop dss Done [2025-09-23 17:25:59.278] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:25:59.278] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:25:59.326] /dev/mem opened. [2025-09-23 17:25:59.326] Memory mapped at address 0xffff97bb8000. [2025-09-23 17:25:59.352] Read at address 0x00600018 (0xffff97bb8018): 0x00000000 [2025-09-23 17:25:59.352] Write at address 0x00600018 (0xffff97bb8018): 0x00400040, readback 0x00400040 [2025-09-23 17:25:59.412] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:25:59.412] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:25:59.604] Loaded PowerVR consumer services. [2025-09-23 17:25:59.619] Waiting data available... [2025-09-23 17:25:59.635] 512+0 records in [2025-09-23 17:25:59.635] 512+0 records out [2025-09-23 17:25:59.683] Starting syslogd/klogd: done [2025-09-23 17:25:59.699] DML Start [2025-09-23 17:25:59.859] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:26:00.083] DML res1: 0 [2025-09-23 17:26:00.559] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:26:00.559] Read Success [2025-09-23 17:26:00.559] Verifying certificate... [2025-09-23 17:26:00.782] Verified OK [2025-09-23 17:26:00.798] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:26:02.453] Verified OK [2025-09-23 17:26:02.453] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:26:03.093] Verified OK [2025-09-23 17:26:03.093] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:26:05.779] fs.protected_hardlinks = 1 [2025-09-23 17:26:05.779] fs.protected_symlinks = 1 [2025-09-23 17:26:05.795] kernel.modules_disabled = 1 [2025-09-23 17:26:05.987] [2025-09-23 17:26:05.987] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:26:07.193] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:26:15.089] SBL1:1210.0.1.0 [2025-09-23 17:26:15.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:26:16.485] SBL2:1210.0.1.0 [2025-09-23 17:26:16.533] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:26:16.645] j-A [2025-09-23 17:26:23.983] The R5 Autosar Classic is running [2025-09-23 17:26:24.014] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:26:24.014] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:26:24.622] INIT: version 2.96 booting [2025-09-23 17:26:24.734] INIT: Entering runlevel: 5 [2025-09-23 17:26:24.877] mtd24 attached [2025-09-23 17:26:24.894] mtd28 attached [2025-09-23 17:26:24.909] mtd32 attached [2025-09-23 17:26:24.957] ubi0:textures is mounted. [2025-09-23 17:26:24.957] RTNETLINK answers: File exists [2025-09-23 17:26:25.020] ubi1:animations is mounted. [2025-09-23 17:26:25.020] ubi2:dml_code is mounted. [2025-09-23 17:26:25.020] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:26:25.020] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:26:25.020] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:26:25.020] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:26:25.020] data.LB_FadeInType0=100 [2025-09-23 17:26:25.020] data.CHLH_FadeInType0=0 [2025-09-23 17:26:25.020] data.WU_FadeInDelay=0 [2025-09-23 17:26:25.020] max_time_out=0 [2025-09-23 17:26:25.020] No splash screen [2025-09-23 17:26:25.020] stop dss Done [2025-09-23 17:26:25.020] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:26:25.091] /dev/mem opened. [2025-09-23 17:26:25.091] Memory mapped at address 0xffffa404a000. [2025-09-23 17:26:25.091] Read at address 0x00600018 (0xffffa404a018): 0x00000000 [2025-09-23 17:26:25.091] Write at address 0x00600018 (0xffffa404a018): 0x00400040, readback 0x00400040 [2025-09-23 17:26:25.107] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:26:25.123] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:26:25.251] Loaded PowerVR consumer services. [2025-09-23 17:26:25.375] Waiting data available... [2025-09-23 17:26:25.375] 512+0 records in [2025-09-23 17:26:25.375] 512+0 records out [2025-09-23 17:26:25.407] Starting syslogd/klogd: done [2025-09-23 17:26:25.423] DML Start [2025-09-23 17:26:25.600] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:26:25.808] DML res1: 0 [2025-09-23 17:26:26.299] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:26:26.299] Read Success [2025-09-23 17:26:26.299] Verifying certificate... [2025-09-23 17:26:26.524] Verified OK [2025-09-23 17:26:26.539] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:26:28.215] Verified OK [2025-09-23 17:26:28.215] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:26:28.839] Verified OK [2025-09-23 17:26:28.839] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:26:31.446] fs.protected_hardlinks = 1 [2025-09-23 17:26:31.446] fs.protected_symlinks = 1 [2025-09-23 17:26:31.462] kernel.modules_disabled = 1 [2025-09-23 17:26:31.653] [2025-09-23 17:26:31.653] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:26:32.859] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:26:40.920] SBL1:1210.0.1.0 [2025-09-23 17:26:40.968] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:26:42.536] SBL2:1210.0.1.0 [2025-09-23 17:26:42.583] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:26:42.679] j-A [2025-09-23 17:26:50.034] The R5 Autosar Classic is running [2025-09-23 17:26:50.059] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:26:50.059] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:26:50.666] INIT: version 2.96 booting [2025-09-23 17:26:50.778] INIT: Entering runlevel: 5 [2025-09-23 17:26:50.938] mtd24 attached [2025-09-23 17:26:50.938] mtd32 attached [2025-09-23 17:26:51.077] mtd28 attached [2025-09-23 17:26:51.077] ubi0:textures is mounted. [2025-09-23 17:26:51.077] ubi1:dml_code is mounted. [2025-09-23 17:26:51.077] RTNETLINK answers: File exists [2025-09-23 17:26:51.077] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:26:51.077] ubi2:animations is mounted. [2025-09-23 17:26:51.077] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:26:51.077] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:26:51.077] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:26:51.077] data.LB_FadeInType0=100 [2025-09-23 17:26:51.077] data.CHLH_FadeInType0=0 [2025-09-23 17:26:51.077] data.WU_FadeInDelay=0 [2025-09-23 17:26:51.077] max_time_out=0 [2025-09-23 17:26:51.077] No splash screen [2025-09-23 17:26:51.077] stop dss Done [2025-09-23 17:26:51.077] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:26:51.135] /dev/mem opened. [2025-09-23 17:26:51.135] Memory mapped at address 0xffffb03c0000. [2025-09-23 17:26:51.135] Read at address 0x00600018 (0xffffb03c0018): 0x00000000 [2025-09-23 17:26:51.135] Write at address 0x00600018 (0xffffb03c0018): 0x00400040, readback 0x00400040 [2025-09-23 17:26:51.135] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:26:51.151] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:26:51.231] Loaded PowerVR consumer services. [2025-09-23 17:26:51.375] Waiting data available... [2025-09-23 17:26:51.391] 512+0 records in [2025-09-23 17:26:51.391] 512+0 records out [2025-09-23 17:26:51.423] Starting syslogd/klogd: done [2025-09-23 17:26:51.439] DML Start [2025-09-23 17:26:51.599] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:26:51.807] DML res1: 0 [2025-09-23 17:26:52.302] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:26:52.326] Read Success [2025-09-23 17:26:52.326] Verifying certificate... [2025-09-23 17:26:52.582] Verified OK [2025-09-23 17:26:52.597] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:26:54.243] Verified OK [2025-09-23 17:26:54.244] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:26:54.879] Verified OK [2025-09-23 17:26:54.879] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:26:57.470] fs.protected_hardlinks = 1 [2025-09-23 17:26:57.470] fs.protected_symlinks = 1 [2025-09-23 17:26:57.486] kernel.modules_disabled = 1 [2025-09-23 17:26:57.678] [2025-09-23 17:26:57.678] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:26:58.877] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:27:06.650] SBL1:1210.0.1.0 [2025-09-23 17:27:06.698] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:27:08.265] SBL2:1210.0.1.0 [2025-09-23 17:27:08.315] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:27:08.408] j-A [2025-09-23 17:27:15.763] The R5 Autosar Classic is running [2025-09-23 17:27:15.787] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:27:15.787] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:27:16.395] INIT: version 2.96 booting [2025-09-23 17:27:16.507] INIT: Entering runlevel: 5 [2025-09-23 17:27:16.666] mtd32 attached [2025-09-23 17:27:16.666] mtd28 attached [2025-09-23 17:27:16.682] mtd24 attached [2025-09-23 17:27:16.731] ubi0:dml_code is mounted. [2025-09-23 17:27:16.731] RTNETLINK answers: File exists [2025-09-23 17:27:16.806] ubi2:textures is mounted. [2025-09-23 17:27:16.806] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:27:16.806] ubi1:animations is mounted. [2025-09-23 17:27:16.806] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:27:16.806] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:27:16.806] data.LB_FadeInType0=100 [2025-09-23 17:27:16.806] data.CHLH_FadeInType0=0 [2025-09-23 17:27:16.806] data.WU_FadeInDelay=0 [2025-09-23 17:27:16.806] max_time_out=0 [2025-09-23 17:27:16.806] No splash screen [2025-09-23 17:27:16.806] stop dss Done [2025-09-23 17:27:16.806] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:27:16.806] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:27:16.835] /dev/mem opened. [2025-09-23 17:27:16.835] Memory mapped at address 0xffffb0bd3000. [2025-09-23 17:27:16.861] Read at address 0x00600018 (0xffffb0bd3018): 0x00000000 [2025-09-23 17:27:16.861] Write at address 0x00600018 (0xffffb0bd3018): 0x00400040, readback 0x00400040 [2025-09-23 17:27:16.889] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:27:16.889] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:27:17.081] Loaded PowerVR consumer services. [2025-09-23 17:27:17.113] Waiting data available... [2025-09-23 17:27:17.146] 512+0 records in [2025-09-23 17:27:17.146] 512+0 records out [2025-09-23 17:27:17.177] Starting syslogd/klogd: done [2025-09-23 17:27:17.193] DML Start [2025-09-23 17:27:17.386] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:27:17.609] DML res1: 0 [2025-09-23 17:27:18.082] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:27:18.082] Read Success [2025-09-23 17:27:18.082] Verifying certificate... [2025-09-23 17:27:18.354] Verified OK [2025-09-23 17:27:18.385] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:27:19.937] Verified OK [2025-09-23 17:27:19.937] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:27:20.572] Verified OK [2025-09-23 17:27:20.572] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:27:23.197] fs.protected_hardlinks = 1 [2025-09-23 17:27:23.197] fs.protected_symlinks = 1 [2025-09-23 17:27:23.198] kernel.modules_disabled = 1 [2025-09-23 17:27:23.387] [2025-09-23 17:27:23.387] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:27:24.609] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:27:32.396] SBL1:1210.0.1.0 [2025-09-23 17:27:32.444] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:27:34.011] SBL2:1210.0.1.0 [2025-09-23 17:27:34.059] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:27:34.171] j-A [2025-09-23 17:27:41.509] The R5 Autosar Classic is running [2025-09-23 17:27:41.540] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:27:41.540] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:27:42.148] INIT: version 2.96 booting [2025-09-23 17:27:42.260] INIT: Entering runlevel: 5 [2025-09-23 17:27:42.420] mtd32 attached [2025-09-23 17:27:42.420] mtd28 attached [2025-09-23 17:27:42.436] mtd24 attached [2025-09-23 17:27:42.483] ubi0:dml_code is mounted. [2025-09-23 17:27:42.483] RTNETLINK answers: File exists [2025-09-23 17:27:42.559] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:27:42.559] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:27:42.559] ubi1:animations is mounted. [2025-09-23 17:27:42.559] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:27:42.559] ubi2:textures is mounted. [2025-09-23 17:27:42.559] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:27:42.559] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:27:42.560] data.LB_FadeInType0=100 [2025-09-23 17:27:42.560] data.CHLH_FadeInType0=0 [2025-09-23 17:27:42.560] data.WU_FadeInDelay=0 [2025-09-23 17:27:42.560] max_time_out=0 [2025-09-23 17:27:42.560] No splash screen [2025-09-23 17:27:42.560] stop dss Done [2025-09-23 17:27:42.560] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:27:42.560] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:27:42.626] /dev/mem opened. [2025-09-23 17:27:42.626] Memory mapped at address 0xffff9f6d7000. [2025-09-23 17:27:42.626] Read at address 0x00600018 (0xffff9f6d7018): 0x00000000 [2025-09-23 17:27:42.626] Write at address 0x00600018 (0xffff9f6d7018): 0x00400040, readback 0x00400040 [2025-09-23 17:27:42.834] Loaded PowerVR consumer services. [2025-09-23 17:27:42.866] Waiting data available... [2025-09-23 17:27:42.882] 512+0 records in [2025-09-23 17:27:42.882] 512+0 records out [2025-09-23 17:27:42.898] Starting syslogd/klogd: done [2025-09-23 17:27:42.930] DML Start [2025-09-23 17:27:43.090] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:27:43.314] DML res1: 0 [2025-09-23 17:27:43.793] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:27:43.793] Read Success [2025-09-23 17:27:43.793] Verifying certificate... [2025-09-23 17:27:44.064] Verified OK [2025-09-23 17:27:44.080] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:27:45.679] Verified OK [2025-09-23 17:27:45.679] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:27:46.276] Verified OK [2025-09-23 17:27:46.276] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:27:49.045] fs.protected_hardlinks = 1 [2025-09-23 17:27:49.046] fs.protected_symlinks = 1 [2025-09-23 17:27:49.046] kernel.modules_disabled = 1 [2025-09-23 17:27:49.234] [2025-09-23 17:27:49.234] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:27:50.408] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:27:58.167] SBL1:1210.0.1.0 [2025-09-23 17:27:58.214] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:27:59.781] SBL2:1210.0.1.0 [2025-09-23 17:27:59.829] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:27:59.941] j-A [2025-09-23 17:28:07.280] The R5 Autosar Classic is running [2025-09-23 17:28:07.305] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:28:07.305] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:28:07.912] INIT: version 2.96 booting [2025-09-23 17:28:08.024] INIT: Entering runlevel: 5 [2025-09-23 17:28:08.339] mtd24 attached [2025-09-23 17:28:08.339] mtd28 attached [2025-09-23 17:28:08.339] mtd32 attached [2025-09-23 17:28:08.339] ubi0:textures is mounted. [2025-09-23 17:28:08.339] RTNETLINK answers: File exists [2025-09-23 17:28:08.339] ubi1:animations is mounted. [2025-09-23 17:28:08.339] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:28:08.339] ubi2:dml_code is mounted. [2025-09-23 17:28:08.339] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:28:08.339] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:28:08.339] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:28:08.339] data.LB_FadeInType0=100 [2025-09-23 17:28:08.339] data.CHLH_FadeInType0=0 [2025-09-23 17:28:08.339] data.WU_FadeInDelay=0 [2025-09-23 17:28:08.339] max_time_out=0 [2025-09-23 17:28:08.339] No splash screen [2025-09-23 17:28:08.339] stop dss Done [2025-09-23 17:28:08.339] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:28:08.372] /dev/mem opened. [2025-09-23 17:28:08.372] Memory mapped at address 0xffff808fb000. [2025-09-23 17:28:08.372] Read at address 0x00600018 (0xffff808fb018): 0x00000000 [2025-09-23 17:28:08.372] Write at address 0x00600018 (0xffff808fb018): 0x00400040, readback 0x00400040 [2025-09-23 17:28:08.372] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:28:08.388] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:28:08.628] Loaded PowerVR consumer services. [2025-09-23 17:28:08.670] Waiting data available... [2025-09-23 17:28:08.670] 512+0 records in [2025-09-23 17:28:08.670] 512+0 records out [2025-09-23 17:28:08.702] Starting syslogd/klogd: done [2025-09-23 17:28:08.718] DML Start [2025-09-23 17:28:08.879] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:28:09.118] DML res1: 0 [2025-09-23 17:28:09.588] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:28:09.588] Read Success [2025-09-23 17:28:09.588] Verifying certificate... [2025-09-23 17:28:09.859] Verified OK [2025-09-23 17:28:09.891] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:28:11.465] Verified OK [2025-09-23 17:28:11.465] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:28:12.526] Verified OK [2025-09-23 17:28:12.527] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:28:14.728] fs.protected_hardlinks = 1 [2025-09-23 17:28:14.728] fs.protected_symlinks = 1 [2025-09-23 17:28:14.744] kernel.modules_disabled = 1 [2025-09-23 17:28:14.951] [2025-09-23 17:28:14.951] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:28:16.225] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:28:23.931] SBL1:1210.0.1.0 [2025-09-23 17:28:23.963] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:28:25.546] SBL2:1210.0.1.0 [2025-09-23 17:28:25.578] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:28:25.690] j-A [2025-09-23 17:28:33.062] The R5 Autosar Classic is running [2025-09-23 17:28:33.062] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:28:33.062] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:28:33.669] INIT: version 2.96 booting [2025-09-23 17:28:33.781] INIT: Entering runlevel: 5 [2025-09-23 17:28:34.108] mtd24 attached [2025-09-23 17:28:34.108] mtd28 attached [2025-09-23 17:28:34.108] ubi0:textures is mounted. [2025-09-23 17:28:34.108] ubi1:animations is mounted. [2025-09-23 17:28:34.108] mtd32 attached [2025-09-23 17:28:34.108] RTNETLINK answers: File exists [2025-09-23 17:28:34.108] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:28:34.108] ubi2:dml_code is mounted. [2025-09-23 17:28:34.108] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:28:34.108] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:28:34.108] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:28:34.108] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:28:34.108] data.LB_FadeInType0=100 [2025-09-23 17:28:34.108] data.CHLH_FadeInType0=0 [2025-09-23 17:28:34.108] data.WU_FadeInDelay=0 [2025-09-23 17:28:34.108] max_time_out=0 [2025-09-23 17:28:34.108] No splash screen [2025-09-23 17:28:34.108] stop dss Done [2025-09-23 17:28:34.156] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:28:34.156] /dev/mem opened. [2025-09-23 17:28:34.156] Memory mapped at address 0xffff939ef000. [2025-09-23 17:28:34.156] Read at address 0x00600018 (0xffff939ef018): 0x00000000 [2025-09-23 17:28:34.156] Write at address 0x00600018 (0xffff939ef018): 0x00400040, readback 0x00400040 [2025-09-23 17:28:34.156] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:28:34.268] Loaded PowerVR consumer services. [2025-09-23 17:28:34.397] Waiting data available... [2025-09-23 17:28:34.413] 512+0 records in [2025-09-23 17:28:34.413] 512+0 records out [2025-09-23 17:28:34.460] Starting syslogd/klogd: done [2025-09-23 17:28:34.476] DML Start [2025-09-23 17:28:34.637] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:28:34.861] DML res1: 0 [2025-09-23 17:28:35.340] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:28:35.361] Read Success [2025-09-23 17:28:35.361] Verifying certificate... [2025-09-23 17:28:35.617] Verified OK [2025-09-23 17:28:35.617] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:28:37.451] Verified OK [2025-09-23 17:28:37.451] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:28:37.978] Verified OK [2025-09-23 17:28:37.978] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:28:40.360] fs.protected_hardlinks = 1 [2025-09-23 17:28:40.360] fs.protected_symlinks = 1 [2025-09-23 17:28:40.375] kernel.modules_disabled = 1 [2025-09-23 17:28:40.551] [2025-09-23 17:28:40.551] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:28:41.913] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:28:49.688] SBL1:1210.0.1.0 [2025-09-23 17:28:49.736] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:28:51.303] SBL2:1210.0.1.0 [2025-09-23 17:28:51.351] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:28:51.447] j-A [2025-09-23 17:28:58.803] The R5 Autosar Classic is running [2025-09-23 17:28:58.827] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:28:58.827] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:28:59.434] INIT: version 2.96 booting [2025-09-23 17:28:59.546] INIT: Entering runlevel: 5 [2025-09-23 17:28:59.705] mtd24 attached [2025-09-23 17:28:59.705] mtd32 attached [2025-09-23 17:28:59.721] mtd28 attached [2025-09-23 17:28:59.780] ubi0:textures is mounted. [2025-09-23 17:28:59.780] RTNETLINK answers: File exists [2025-09-23 17:28:59.780] ubi1:dml_code is mounted. [2025-09-23 17:28:59.780] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:28:59.837] ubi2:animations is mounted. [2025-09-23 17:28:59.837] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:28:59.837] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:28:59.837] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:28:59.837] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:28:59.837] data.LB_FadeInType0=100 [2025-09-23 17:28:59.837] data.CHLH_FadeInType0=0 [2025-09-23 17:28:59.837] data.WU_FadeInDelay=0 [2025-09-23 17:28:59.837] max_time_out=0 [2025-09-23 17:28:59.837] No splash screen [2025-09-23 17:28:59.837] stop dss Done [2025-09-23 17:28:59.853] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:28:59.869] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:28:59.911] /dev/mem opened. [2025-09-23 17:28:59.911] Memory mapped at address 0xffff8eb16000. [2025-09-23 17:28:59.911] Read at address 0x00600018 (0xffff8eb16018): 0x00000000 [2025-09-23 17:28:59.911] Write at address 0x00600018 (0xffff8eb16018): 0x00400040, readback 0x00400040 [2025-09-23 17:29:00.023] Loaded PowerVR consumer services. [2025-09-23 17:29:00.150] Waiting data available... [2025-09-23 17:29:00.166] 512+0 records in [2025-09-23 17:29:00.182] 512+0 records out [2025-09-23 17:29:00.214] Starting syslogd/klogd: done [2025-09-23 17:29:00.231] DML Start [2025-09-23 17:29:00.407] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:29:00.631] DML res1: 0 [2025-09-23 17:29:01.078] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:29:01.078] Read Success [2025-09-23 17:29:01.078] Verifying certificate... [2025-09-23 17:29:01.350] Verified OK [2025-09-23 17:29:01.366] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:29:03.140] Verified OK [2025-09-23 17:29:03.156] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:29:03.697] Verified OK [2025-09-23 17:29:03.697] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:29:06.256] fs.protected_hardlinks = 1 [2025-09-23 17:29:06.256] fs.protected_symlinks = 1 [2025-09-23 17:29:06.289] kernel.modules_disabled = 1 [2025-09-23 17:29:06.463] [2025-09-23 17:29:06.463] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:29:07.721] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:29:15.449] SBL1:1210.0.1.0 [2025-09-23 17:29:15.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:29:17.063] SBL2:1210.0.1.0 [2025-09-23 17:29:17.095] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:29:17.208] j-A [2025-09-23 17:29:24.582] The R5 Autosar Classic is running [2025-09-23 17:29:24.582] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:29:24.582] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:29:25.189] INIT: version 2.96 booting [2025-09-23 17:29:25.301] INIT: Entering runlevel: 5 [2025-09-23 17:29:25.644] mtd24 attached [2025-09-23 17:29:25.644] mtd28 attached [2025-09-23 17:29:25.644] ubi0:textures is mounted. [2025-09-23 17:29:25.644] mtd32 attached [2025-09-23 17:29:25.644] ubi1:animations is mounted. [2025-09-23 17:29:25.644] RTNETLINK answers: File exists [2025-09-23 17:29:25.644] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:29:25.644] ubi2:dml_code is mounted. [2025-09-23 17:29:25.644] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:29:25.644] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:29:25.644] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:29:25.644] data.LB_FadeInType0=100 [2025-09-23 17:29:25.644] data.CHLH_FadeInType0=0 [2025-09-23 17:29:25.644] data.WU_FadeInDelay=0 [2025-09-23 17:29:25.644] max_time_out=0 [2025-09-23 17:29:25.644] No splash screen [2025-09-23 17:29:25.644] stop dss Done [2025-09-23 17:29:25.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:29:25.644] /dev/mem opened. [2025-09-23 17:29:25.644] Memory mapped at address 0xffff7fa95000. [2025-09-23 17:29:25.662] Read at address 0x00600018 (0xffff7fa95018): 0x00000000 [2025-09-23 17:29:25.662] Write at address 0x00600018 (0xffff7fa95018): 0x00400040, readback 0x00400040 [2025-09-23 17:29:25.662] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:29:25.685] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:29:25.829] Loaded PowerVR consumer services. [2025-09-23 17:29:25.951] 512+0 records in [2025-09-23 17:29:25.951] 512+0 records out [2025-09-23 17:29:25.951] Waiting data available... [2025-09-23 17:29:25.983] Starting syslogd/klogd: done [2025-09-23 17:29:25.999] DML Start [2025-09-23 17:29:26.207] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:29:26.415] DML res1: 0 [2025-09-23 17:29:26.825] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:29:26.825] Read Success [2025-09-23 17:29:26.825] Verifying certificate... [2025-09-23 17:29:27.050] Verified OK [2025-09-23 17:29:27.066] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:29:28.612] Verified OK [2025-09-23 17:29:28.612] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:29:29.236] Verified OK [2025-09-23 17:29:29.236] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:29:31.969] fs.protected_hardlinks = 1 [2025-09-23 17:29:31.969] fs.protected_symlinks = 1 [2025-09-23 17:29:31.985] kernel.modules_disabled = 1 [2025-09-23 17:29:32.161] [2025-09-23 17:29:32.161] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:29:33.519] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:29:41.211] SBL1:1210.0.1.0 [2025-09-23 17:29:41.259] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:29:42.826] SBL2:1210.0.1.0 [2025-09-23 17:29:42.874] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:29:42.986] j-A [2025-09-23 17:29:50.326] The R5 Autosar Classic is running [2025-09-23 17:29:50.352] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:29:50.352] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:29:50.959] INIT: version 2.96 booting [2025-09-23 17:29:51.071] INIT: Entering runlevel: 5 [2025-09-23 17:29:51.373] mtd24 attached [2025-09-23 17:29:51.373] mtd28 attached [2025-09-23 17:29:51.373] mtd32 attached [2025-09-23 17:29:51.373] RTNETLINK answers: File exists [2025-09-23 17:29:51.373] ubi0:textures is mounted. [2025-09-23 17:29:51.373] ubi1:animations is mounted. [2025-09-23 17:29:51.373] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:29:51.373] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:29:51.373] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:29:51.373] ubi2:dml_code is mounted. [2025-09-23 17:29:51.373] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:29:51.373] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:29:51.373] data.LB_FadeInType0=100 [2025-09-23 17:29:51.373] data.CHLH_FadeInType0=0 [2025-09-23 17:29:51.373] data.WU_FadeInDelay=0 [2025-09-23 17:29:51.373] max_time_out=0 [2025-09-23 17:29:51.373] No splash screen [2025-09-23 17:29:51.373] stop dss Done [2025-09-23 17:29:51.391] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:29:51.426] /dev/mem opened. [2025-09-23 17:29:51.426] Memory mapped at address 0xffffbe80b000. [2025-09-23 17:29:51.426] Read at address 0x00600018 (0xffffbe80b018): 0x00000000 [2025-09-23 17:29:51.426] Write at address 0x00600018 (0xffffbe80b018): 0x00400040, readback 0x00400040 [2025-09-23 17:29:51.426] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:29:51.537] Loaded PowerVR consumer services. [2025-09-23 17:29:51.681] Waiting data available... [2025-09-23 17:29:51.681] 512+0 records in [2025-09-23 17:29:51.697] 512+0 records out [2025-09-23 17:29:51.729] Starting syslogd/klogd: done [2025-09-23 17:29:51.761] DML Start [2025-09-23 17:29:51.937] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:29:52.161] DML res1: 0 [2025-09-23 17:29:52.608] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:29:52.630] Read Success [2025-09-23 17:29:52.630] Verifying certificate... [2025-09-23 17:29:52.870] Verified OK [2025-09-23 17:29:52.886] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:29:54.578] Verified OK [2025-09-23 17:29:54.578] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:29:55.155] Verified OK [2025-09-23 17:29:55.155] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:29:57.777] fs.protected_hardlinks = 1 [2025-09-23 17:29:57.777] fs.protected_symlinks = 1 [2025-09-23 17:29:57.793] kernel.modules_disabled = 1 [2025-09-23 17:29:57.985] [2025-09-23 17:29:57.985] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:29:59.181] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:30:06.977] SBL1:1210.0.1.0 [2025-09-23 17:30:07.025] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:30:08.592] SBL2:1210.0.1.0 [2025-09-23 17:30:08.641] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:30:08.752] j-A [2025-09-23 17:30:16.092] The R5 Autosar Classic is running [2025-09-23 17:30:16.117] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:30:16.117] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:30:16.725] INIT: version 2.96 booting [2025-09-23 17:30:16.837] INIT: Entering runlevel: 5 [2025-09-23 17:30:17.126] mtd24 attached [2025-09-23 17:30:17.126] mtd32 attached [2025-09-23 17:30:17.126] mtd28 attached [2025-09-23 17:30:17.126] ubi0:textures is mounted. [2025-09-23 17:30:17.126] RTNETLINK answers: File exists [2025-09-23 17:30:17.126] ubi1:dml_code is mounted. [2025-09-23 17:30:17.126] ubi2:animations is mounted. [2025-09-23 17:30:17.126] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:30:17.126] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:30:17.126] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:30:17.126] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:30:17.126] data.LB_FadeInType0=100 [2025-09-23 17:30:17.126] data.CHLH_FadeInType0=0 [2025-09-23 17:30:17.126] data.WU_FadeInDelay=0 [2025-09-23 17:30:17.126] max_time_out=0 [2025-09-23 17:30:17.126] No splash screen [2025-09-23 17:30:17.126] stop dss Done [2025-09-23 17:30:17.126] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:30:17.205] /dev/mem opened. [2025-09-23 17:30:17.205] Memory mapped at address 0xffff8c160000. [2025-09-23 17:30:17.205] Read at address 0x00600018 (0xffff8c160018): 0x00000000 [2025-09-23 17:30:17.205] Write at address 0x00600018 (0xffff8c160018): 0x00400040, readback 0x00400040 [2025-09-23 17:30:17.237] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:30:17.253] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:30:17.445] Loaded PowerVR consumer services. [2025-09-23 17:30:17.507] Waiting data available... [2025-09-23 17:30:17.507] 512+0 records in [2025-09-23 17:30:17.507] 512+0 records out [2025-09-23 17:30:17.523] Starting syslogd/klogd: done [2025-09-23 17:30:17.539] DML Start [2025-09-23 17:30:17.716] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:30:17.939] DML res1: 0 [2025-09-23 17:30:18.353] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:30:18.353] Read Success [2025-09-23 17:30:18.353] Verifying certificate... [2025-09-23 17:30:18.609] Verified OK [2025-09-23 17:30:18.609] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:30:20.240] Verified OK [2025-09-23 17:30:20.240] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:30:20.925] Verified OK [2025-09-23 17:30:20.925] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:30:23.628] fs.protected_hardlinks = 1 [2025-09-23 17:30:23.644] fs.protected_symlinks = 1 [2025-09-23 17:30:23.644] kernel.modules_disabled = 1 [2025-09-23 17:30:23.835] [2025-09-23 17:30:23.835] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:30:25.009] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:30:32.705] SBL1:1210.0.1.0 [2025-09-23 17:30:32.753] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:30:34.320] SBL2:1210.0.1.0 [2025-09-23 17:30:34.368] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:30:34.480] j-A [2025-09-23 17:30:41.820] The R5 Autosar Classic is running [2025-09-23 17:30:41.845] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:30:41.845] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:30:42.453] INIT: version 2.96 booting [2025-09-23 17:30:42.564] INIT: Entering runlevel: 5 [2025-09-23 17:30:42.834] mtd32 attached [2025-09-23 17:30:42.834] mtd24 attached [2025-09-23 17:30:42.834] mtd28 attached [2025-09-23 17:30:42.834] RTNETLINK answers: File exists [2025-09-23 17:30:42.847] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:30:42.847] ubi2:animations is mounted. [2025-09-23 17:30:42.847] ubi1:textures is mounted. [2025-09-23 17:30:42.847] ubi0:dml_code is mounted. [2025-09-23 17:30:42.847] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:30:42.847] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:30:42.847] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:30:42.847] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:30:42.847] data.LB_FadeInType0=100 [2025-09-23 17:30:42.847] data.CHLH_FadeInType0=0 [2025-09-23 17:30:42.847] data.WU_FadeInDelay=0 [2025-09-23 17:30:42.847] max_time_out=0 [2025-09-23 17:30:42.847] No splash screen [2025-09-23 17:30:42.847] stop dss Done [2025-09-23 17:30:42.879] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:30:42.895] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:30:42.927] /dev/mem opened. [2025-09-23 17:30:42.927] Memory mapped at address 0xffff95b44000. [2025-09-23 17:30:42.927] Read at address 0x00600018 (0xffff95b44018): 0x00000000 [2025-09-23 17:30:42.927] Write at address 0x00600018 (0xffff95b44018): 0x00400040, readback 0x00400040 [2025-09-23 17:30:43.134] Loaded PowerVR consumer services. [2025-09-23 17:30:43.166] Waiting data available... [2025-09-23 17:30:43.182] 512+0 records in [2025-09-23 17:30:43.182] 512+0 records out [2025-09-23 17:30:43.246] Starting syslogd/klogd: done [2025-09-23 17:30:43.262] DML Start [2025-09-23 17:30:43.422] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:30:43.646] DML res1: 0 [2025-09-23 17:30:44.101] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:30:44.101] Read Success [2025-09-23 17:30:44.101] Verifying certificate... [2025-09-23 17:30:44.357] Verified OK [2025-09-23 17:30:44.373] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:30:46.131] Verified OK [2025-09-23 17:30:46.131] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:30:46.739] Verified OK [2025-09-23 17:30:46.739] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:30:49.233] fs.protected_hardlinks = 1 [2025-09-23 17:30:49.233] fs.protected_symlinks = 1 [2025-09-23 17:30:49.250] kernel.modules_disabled = 1 [2025-09-23 17:30:49.457] [2025-09-23 17:30:49.457] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:30:50.711] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:30:58.464] SBL1:1210.0.1.0 [2025-09-23 17:30:58.496] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:31:00.078] SBL2:1210.0.1.0 [2025-09-23 17:31:00.110] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:31:00.223] j-A [2025-09-23 17:31:07.595] The R5 Autosar Classic is running [2025-09-23 17:31:07.595] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:31:07.595] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:31:08.204] INIT: version 2.96 booting [2025-09-23 17:31:08.647] INIT: Entering runlevel: 5 [2025-09-23 17:31:08.647] mtd32 attached [2025-09-23 17:31:08.647] mtd24 attached [2025-09-23 17:31:08.647] mtd28 attached [2025-09-23 17:31:08.647] ubi0:dml_code is mounted. [2025-09-23 17:31:08.647] RTNETLINK answers: File exists [2025-09-23 17:31:08.647] ubi1:textures is mounted. [2025-09-23 17:31:08.647] ubi2:animations is mounted. [2025-09-23 17:31:08.647] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:31:08.647] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:31:08.647] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:31:08.647] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:31:08.647] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:31:08.647] data.LB_FadeInType0=100 [2025-09-23 17:31:08.647] data.CHLH_FadeInType0=0 [2025-09-23 17:31:08.647] data.WU_FadeInDelay=0 [2025-09-23 17:31:08.647] max_time_out=0 [2025-09-23 17:31:08.647] No splash screen [2025-09-23 17:31:08.647] stop dss Done [2025-09-23 17:31:08.659] /dev/mem opened. [2025-09-23 17:31:08.659] Memory mapped at address 0xffffa4dfd000. [2025-09-23 17:31:08.659] Read at address 0x00600018 (0xffffa4dfd018): 0x00000000 [2025-09-23 17:31:08.659] Write at address 0x00600018 (0xffffa4dfd018): 0x00400040, readback 0x00400040 [2025-09-23 17:31:08.659] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:31:08.675] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:31:08.771] Loaded PowerVR consumer services. [2025-09-23 17:31:08.930] Waiting data available... [2025-09-23 17:31:08.930] 512+0 records in [2025-09-23 17:31:08.930] 512+0 records out [2025-09-23 17:31:08.962] Starting syslogd/klogd: done [2025-09-23 17:31:08.978] DML Start [2025-09-23 17:31:09.169] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:31:09.647] DML res1: 0 [2025-09-23 17:31:09.848] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:31:09.848] Read Success [2025-09-23 17:31:09.848] Verifying certificate... [2025-09-23 17:31:10.104] Verified OK [2025-09-23 17:31:10.120] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:31:11.756] Verified OK [2025-09-23 17:31:11.756] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:31:12.376] Verified OK [2025-09-23 17:31:12.376] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:31:14.918] fs.protected_hardlinks = 1 [2025-09-23 17:31:14.918] fs.protected_symlinks = 1 [2025-09-23 17:31:14.934] kernel.modules_disabled = 1 [2025-09-23 17:31:15.126] [2025-09-23 17:31:15.126] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:31:16.479] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:31:24.178] SBL1:1210.0.1.0 [2025-09-23 17:31:24.210] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:31:25.793] SBL2:1210.0.1.0 [2025-09-23 17:31:25.825] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:31:25.937] j-A [2025-09-23 17:31:33.292] The R5 Autosar Classic is running [2025-09-23 17:31:33.292] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:31:33.313] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:31:33.920] INIT: version 2.96 booting [2025-09-23 17:31:34.032] INIT: Entering runlevel: 5 [2025-09-23 17:31:34.176] mtd24 attached [2025-09-23 17:31:34.192] mtd28 attached [2025-09-23 17:31:34.208] mtd32 attached [2025-09-23 17:31:34.257] RTNETLINK answers: File exists [2025-09-23 17:31:34.257] ubi0:textures is mounted. [2025-09-23 17:31:34.286] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:31:34.286] ubi1:animations is mounted. [2025-09-23 17:31:34.286] ubi2:dml_code is mounted. [2025-09-23 17:31:34.286] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:31:34.286] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:31:34.286] data.LB_FadeInType0=100 [2025-09-23 17:31:34.318] data.CHLH_FadeInType0=0 [2025-09-23 17:31:34.318] data.WU_FadeInDelay=0 [2025-09-23 17:31:34.318] max_time_out=0 [2025-09-23 17:31:34.318] No splash screen [2025-09-23 17:31:34.318] stop dss Done [2025-09-23 17:31:34.318] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:31:34.318] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:31:34.375] /dev/mem opened. [2025-09-23 17:31:34.375] Memory mapped at address 0xffffa8931000. [2025-09-23 17:31:34.375] Read at address 0x00600018 (0xffffa8931018): 0x00000000 [2025-09-23 17:31:34.375] Write at address 0x00600018 (0xffffa8931018): 0x00400040, readback 0x00400040 [2025-09-23 17:31:34.375] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:31:34.391] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:31:34.551] Loaded PowerVR consumer services. [2025-09-23 17:31:34.663] Waiting data available... [2025-09-23 17:31:34.679] 512+0 records in [2025-09-23 17:31:34.679] 512+0 records out [2025-09-23 17:31:34.694] Starting syslogd/klogd: done [2025-09-23 17:31:34.710] DML Start [2025-09-23 17:31:34.887] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:31:35.174] DML res1: 0 [2025-09-23 17:31:35.510] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:31:35.531] Read Success [2025-09-23 17:31:35.531] Verifying certificate... [2025-09-23 17:31:35.803] Verified OK [2025-09-23 17:31:35.819] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:31:37.458] Verified OK [2025-09-23 17:31:37.458] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:31:38.082] Verified OK [2025-09-23 17:31:38.082] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:31:40.688] fs.protected_hardlinks = 1 [2025-09-23 17:31:40.688] fs.protected_symlinks = 1 [2025-09-23 17:31:40.704] kernel.modules_disabled = 1 [2025-09-23 17:31:40.896] [2025-09-23 17:31:40.896] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:31:42.204] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:31:50.059] SBL1:1210.0.1.0 [2025-09-23 17:31:50.107] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:31:51.673] SBL2:1210.0.1.0 [2025-09-23 17:31:51.705] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:31:51.817] j-A [2025-09-23 17:31:59.172] The R5 Autosar Classic is running [2025-09-23 17:31:59.172] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:31:59.193] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:31:59.801] INIT: version 2.96 booting [2025-09-23 17:31:59.913] INIT: Entering runlevel: 5 [2025-09-23 17:32:00.057] mtd24 attached [2025-09-23 17:32:00.073] mtd28 attached [2025-09-23 17:32:00.089] mtd32 attached [2025-09-23 17:32:00.186] ubi0:textures is mounted. [2025-09-23 17:32:00.186] ubi1:animations is mounted. [2025-09-23 17:32:00.186] RTNETLINK answers: File exists [2025-09-23 17:32:00.186] ubi2:dml_code is mounted. [2025-09-23 17:32:00.186] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:32:00.186] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:32:00.186] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:32:00.186] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:32:00.186] data.LB_FadeInType0=100 [2025-09-23 17:32:00.186] data.CHLH_FadeInType0=0 [2025-09-23 17:32:00.186] data.WU_FadeInDelay=0 [2025-09-23 17:32:00.186] max_time_out=0 [2025-09-23 17:32:00.186] No splash screen [2025-09-23 17:32:00.186] stop dss Done [2025-09-23 17:32:00.186] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:32:00.259] /dev/mem opened. [2025-09-23 17:32:00.259] Memory mapped at address 0xffffa27d6000. [2025-09-23 17:32:00.259] Read at address 0x00600018 (0xffffa27d6018): 0x00000000 [2025-09-23 17:32:00.259] Write at address 0x00600018 (0xffffa27d6018): 0x00400040, readback 0x00400040 [2025-09-23 17:32:00.259] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:32:00.259] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:32:00.418] Loaded PowerVR consumer services. [2025-09-23 17:32:00.530] Waiting data available... [2025-09-23 17:32:00.546] 512+0 records in [2025-09-23 17:32:00.546] 512+0 records out [2025-09-23 17:32:00.594] Starting syslogd/klogd: done [2025-09-23 17:32:00.610] DML Start [2025-09-23 17:32:00.771] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:32:00.994] DML res1: 0 [2025-09-23 17:32:01.453] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:32:01.453] Read Success [2025-09-23 17:32:01.453] Verifying certificate... [2025-09-23 17:32:01.692] Verified OK [2025-09-23 17:32:01.708] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:32:03.315] Verified OK [2025-09-23 17:32:03.315] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:32:03.955] Verified OK [2025-09-23 17:32:03.955] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:32:06.641] fs.protected_hardlinks = 1 [2025-09-23 17:32:06.657] fs.protected_symlinks = 1 [2025-09-23 17:32:06.657] kernel.modules_disabled = 1 [2025-09-23 17:32:06.864] [2025-09-23 17:32:06.864] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:32:08.019] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:32:15.817] SBL1:1210.0.1.0 [2025-09-23 17:32:15.849] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:32:17.431] SBL2:1210.0.1.0 [2025-09-23 17:32:17.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:32:17.575] j-A [2025-09-23 17:32:24.930] The R5 Autosar Classic is running [2025-09-23 17:32:24.930] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:32:24.951] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:32:25.559] INIT: version 2.96 booting [2025-09-23 17:32:25.670] INIT: Entering runlevel: 5 [2025-09-23 17:32:25.830] mtd28 attached [2025-09-23 17:32:25.830] mtd32 attached [2025-09-23 17:32:25.846] mtd24 attached [2025-09-23 17:32:25.894] ubi0:animations is mounted. [2025-09-23 17:32:25.894] RTNETLINK answers: File exists [2025-09-23 17:32:25.937] ubi1:dml_code is mounted. [2025-09-23 17:32:25.937] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:32:25.937] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:32:25.937] ubi2:textures is mounted. [2025-09-23 17:32:25.937] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:32:25.937] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:32:25.937] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:32:25.955] data.LB_FadeInType0=100 [2025-09-23 17:32:25.956] data.CHLH_FadeInType0=0 [2025-09-23 17:32:25.956] data.WU_FadeInDelay=0 [2025-09-23 17:32:25.956] max_time_out=0 [2025-09-23 17:32:25.956] No splash screen [2025-09-23 17:32:25.956] stop dss Done [2025-09-23 17:32:26.039] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:32:26.039] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:32:26.039] /dev/mem opened. [2025-09-23 17:32:26.039] Memory mapped at address 0xffff9b264000. [2025-09-23 17:32:26.039] Read at address 0x00600018 (0xffff9b264018): 0x00000000 [2025-09-23 17:32:26.039] Write at address 0x00600018 (0xffff9b264018): 0x00400040, readback 0x00400040 [2025-09-23 17:32:26.151] Loaded PowerVR consumer services. [2025-09-23 17:32:26.279] Waiting data available... [2025-09-23 17:32:26.295] 512+0 records in [2025-09-23 17:32:26.295] 512+0 records out [2025-09-23 17:32:26.343] Starting syslogd/klogd: done [2025-09-23 17:32:26.359] DML Start [2025-09-23 17:32:26.551] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:32:26.726] DML res1: 0 [2025-09-23 17:32:27.238] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:32:27.259] Read Success [2025-09-23 17:32:27.259] Verifying certificate... [2025-09-23 17:32:27.468] Verified OK [2025-09-23 17:32:27.483] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:32:29.308] Verified OK [2025-09-23 17:32:29.308] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:32:29.764] Verified OK [2025-09-23 17:32:29.764] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:32:32.146] fs.protected_hardlinks = 1 [2025-09-23 17:32:32.146] fs.protected_symlinks = 1 [2025-09-23 17:32:32.162] kernel.modules_disabled = 1 [2025-09-23 17:32:32.338] [2025-09-23 17:32:32.338] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:32:33.770] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:32:41.568] SBL1:1210.0.1.0 [2025-09-23 17:32:41.616] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:32:43.183] SBL2:1210.0.1.0 [2025-09-23 17:32:43.231] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:32:43.343] j-A [2025-09-23 17:32:50.681] The R5 Autosar Classic is running [2025-09-23 17:32:50.712] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:32:50.712] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:32:51.319] INIT: version 2.96 booting [2025-09-23 17:32:51.432] INIT: Entering runlevel: 5 [2025-09-23 17:32:51.575] mtd24 attached [2025-09-23 17:32:51.591] mtd28 attached [2025-09-23 17:32:51.608] mtd32 attached [2025-09-23 17:32:51.715] ubi1:animations is mounted. [2025-09-23 17:32:51.715] RTNETLINK answers: File exists [2025-09-23 17:32:51.715] ubi0:textures is mounted. [2025-09-23 17:32:51.715] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:32:51.715] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:32:51.715] ubi2:dml_code is mounted. [2025-09-23 17:32:51.715] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:32:51.715] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:32:51.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:32:51.717] data.LB_FadeInType0=100 [2025-09-23 17:32:51.717] data.CHLH_FadeInType0=0 [2025-09-23 17:32:51.717] data.WU_FadeInDelay=0 [2025-09-23 17:32:51.717] max_time_out=0 [2025-09-23 17:32:51.717] No splash screen [2025-09-23 17:32:51.717] stop dss Done [2025-09-23 17:32:51.733] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:32:51.756] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:32:51.772] /dev/mem opened. [2025-09-23 17:32:51.772] Memory mapped at address 0xffff8c08e000. [2025-09-23 17:32:51.798] Read at address 0x00600018 (0xffff8c08e018): 0x00000000 [2025-09-23 17:32:51.798] Write at address 0x00600018 (0xffff8c08e018): 0x00400040, readback 0x00400040 [2025-09-23 17:32:52.022] Loaded PowerVR consumer services. [2025-09-23 17:32:52.038] Waiting data available... [2025-09-23 17:32:52.054] 512+0 records in [2025-09-23 17:32:52.054] 512+0 records out [2025-09-23 17:32:52.102] Starting syslogd/klogd: done [2025-09-23 17:32:52.134] DML Start [2025-09-23 17:32:52.310] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:32:52.534] DML res1: 0 [2025-09-23 17:32:53.040] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:32:53.040] Read Success [2025-09-23 17:32:53.040] Verifying certificate... [2025-09-23 17:32:53.295] Verified OK [2025-09-23 17:32:53.311] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:32:55.062] Verified OK [2025-09-23 17:32:55.062] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:32:55.609] Verified OK [2025-09-23 17:32:55.609] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:32:58.120] fs.protected_hardlinks = 1 [2025-09-23 17:32:58.136] fs.protected_symlinks = 1 [2025-09-23 17:32:58.136] kernel.modules_disabled = 1 [2025-09-23 17:32:58.344] [2025-09-23 17:32:58.344] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:32:59.583] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:33:07.333] SBL1:1210.0.1.0 [2025-09-23 17:33:07.365] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:33:08.948] SBL2:1210.0.1.0 [2025-09-23 17:33:08.983] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:33:09.091] j-A [2025-09-23 17:33:16.463] The R5 Autosar Classic is running [2025-09-23 17:33:16.463] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:33:16.463] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:33:17.070] INIT: version 2.96 booting [2025-09-23 17:33:17.183] INIT: Entering runlevel: 5 [2025-09-23 17:33:17.483] mtd24 attached [2025-09-23 17:33:17.483] mtd28 attached [2025-09-23 17:33:17.483] mtd32 attached [2025-09-23 17:33:17.483] RTNETLINK answers: File exists [2025-09-23 17:33:17.483] ubi0:textures is mounted. [2025-09-23 17:33:17.483] ubi1:animations is mounted. [2025-09-23 17:33:17.483] ubi2:dml_code is mounted. [2025-09-23 17:33:17.483] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:33:17.483] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:33:17.483] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:33:17.483] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:33:17.483] data.LB_FadeInType0=100 [2025-09-23 17:33:17.483] data.CHLH_FadeInType0=0 [2025-09-23 17:33:17.483] data.WU_FadeInDelay=0 [2025-09-23 17:33:17.483] max_time_out=0 [2025-09-23 17:33:17.483] No splash screen [2025-09-23 17:33:17.483] stop dss Done [2025-09-23 17:33:17.483] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:33:17.510] /dev/mem opened. [2025-09-23 17:33:17.510] Memory mapped at address 0xffff9b941000. [2025-09-23 17:33:17.542] Read at address 0x00600018 (0xffff9b941018): 0x00000000 [2025-09-23 17:33:17.542] Write at address 0x00600018 (0xffff9b941018): 0x00400040, readback 0x00400040 [2025-09-23 17:33:17.542] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:33:17.542] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:33:17.734] Loaded PowerVR consumer services. [2025-09-23 17:33:17.782] Waiting data available... [2025-09-23 17:33:17.814] 512+0 records in [2025-09-23 17:33:17.814] 512+0 records out [2025-09-23 17:33:17.846] Starting syslogd/klogd: done [2025-09-23 17:33:17.862] DML Start [2025-09-23 17:33:18.038] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:33:18.277] DML res1: 0 [2025-09-23 17:33:18.721] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:33:18.721] Read Success [2025-09-23 17:33:18.721] Verifying certificate... [2025-09-23 17:33:18.977] Verified OK [2025-09-23 17:33:18.993] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:33:20.736] Verified OK [2025-09-23 17:33:20.736] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:33:21.373] Verified OK [2025-09-23 17:33:21.373] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:33:23.948] fs.protected_hardlinks = 1 [2025-09-23 17:33:23.948] fs.protected_symlinks = 1 [2025-09-23 17:33:23.982] kernel.modules_disabled = 1 [2025-09-23 17:33:24.139] [2025-09-23 17:33:24.139] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:33:25.299] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:33:33.089] SBL1:1210.0.1.0 [2025-09-23 17:33:33.120] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:33:34.703] SBL2:1210.0.1.0 [2025-09-23 17:33:34.736] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:33:34.847] j-A [2025-09-23 17:33:42.201] The R5 Autosar Classic is running [2025-09-23 17:33:42.201] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:33:42.222] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:33:42.829] INIT: version 2.96 booting [2025-09-23 17:33:43.250] INIT: Entering runlevel: 5 [2025-09-23 17:33:43.250] mtd32 attached [2025-09-23 17:33:43.250] mtd24 attached [2025-09-23 17:33:43.250] mtd28 attached [2025-09-23 17:33:43.250] ubi0:dml_code is mounted. [2025-09-23 17:33:43.250] ubi1:textures is mounted. [2025-09-23 17:33:43.250] RTNETLINK answers: File exists [2025-09-23 17:33:43.250] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:33:43.250] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:33:43.250] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:33:43.250] ubi2:animations is mounted. [2025-09-23 17:33:43.250] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:33:43.250] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:33:43.250] data.LB_FadeInType0=100 [2025-09-23 17:33:43.250] data.CHLH_FadeInType0=0 [2025-09-23 17:33:43.250] data.WU_FadeInDelay=0 [2025-09-23 17:33:43.250] max_time_out=0 [2025-09-23 17:33:43.250] No splash screen [2025-09-23 17:33:43.250] stop dss Done [2025-09-23 17:33:43.298] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:33:43.298] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:33:43.298] /dev/mem opened. [2025-09-23 17:33:43.298] Memory mapped at address 0xffff8d583000. [2025-09-23 17:33:43.298] Read at address 0x00600018 (0xffff8d583018): 0x00000000 [2025-09-23 17:33:43.298] Write at address 0x00600018 (0xffff8d583018): 0x00400040, readback 0x00400040 [2025-09-23 17:33:43.394] Loaded PowerVR consumer services. [2025-09-23 17:33:43.538] Waiting data available... [2025-09-23 17:33:43.538] 512+0 records in [2025-09-23 17:33:43.538] 512+0 records out [2025-09-23 17:33:43.586] Starting syslogd/klogd: done [2025-09-23 17:33:43.602] DML Start [2025-09-23 17:33:43.777] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:33:44.250] DML res1: 0 [2025-09-23 17:33:44.465] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:33:44.465] Read Success [2025-09-23 17:33:44.481] Verifying certificate... [2025-09-23 17:33:44.721] Verified OK [2025-09-23 17:33:44.736] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:33:46.336] Verified OK [2025-09-23 17:33:46.336] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:33:46.981] Verified OK [2025-09-23 17:33:46.981] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:33:49.716] fs.protected_hardlinks = 1 [2025-09-23 17:33:49.716] fs.protected_symlinks = 1 [2025-09-23 17:33:49.737] kernel.modules_disabled = 1 [2025-09-23 17:33:49.923] [2025-09-23 17:33:49.923] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:33:51.096] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:33:58.843] SBL1:1210.0.1.0 [2025-09-23 17:33:58.875] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:34:00.457] SBL2:1210.0.1.0 [2025-09-23 17:34:00.489] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:34:00.601] j-A [2025-09-23 17:34:07.956] The R5 Autosar Classic is running [2025-09-23 17:34:07.956] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:34:07.977] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:34:08.584] INIT: version 2.96 booting [2025-09-23 17:34:08.986] INIT: Entering runlevel: 5 [2025-09-23 17:34:08.986] mtd24 attached [2025-09-23 17:34:08.986] mtd28 attached [2025-09-23 17:34:08.986] mtd32 attached [2025-09-23 17:34:08.986] ubi1:animations is mounted. [2025-09-23 17:34:08.991] RTNETLINK answers: File exists [2025-09-23 17:34:08.991] ubi0:textures is mounted. [2025-09-23 17:34:08.991] ubi2:dml_code is mounted. [2025-09-23 17:34:08.991] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:34:08.991] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:34:08.991] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:34:08.991] data.LB_FadeInType0=100 [2025-09-23 17:34:08.991] data.CHLH_FadeInType0=0 [2025-09-23 17:34:08.991] data.WU_FadeInDelay=0 [2025-09-23 17:34:08.991] max_time_out=0 [2025-09-23 17:34:08.991] No splash screen [2025-09-23 17:34:08.991] stop dss Done [2025-09-23 17:34:08.991] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:34:08.991] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:34:09.023] /dev/mem opened. [2025-09-23 17:34:09.023] Memory mapped at address 0xffffa3239000. [2025-09-23 17:34:09.049] Read at address 0x00600018 (0xffffa3239018): 0x00000000 [2025-09-23 17:34:09.049] Write at address 0x00600018 (0xffffa3239018): 0x00400040, readback 0x00400040 [2025-09-23 17:34:09.096] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:34:09.096] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:34:09.256] Loaded PowerVR consumer services. [2025-09-23 17:34:09.320] Waiting data available... [2025-09-23 17:34:09.336] 512+0 records in [2025-09-23 17:34:09.336] 512+0 records out [2025-09-23 17:34:09.399] Starting syslogd/klogd: done [2025-09-23 17:34:09.416] DML Start [2025-09-23 17:34:09.576] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:34:10.002] DML res1: 0 [2025-09-23 17:34:10.309] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:34:10.309] Read Success [2025-09-23 17:34:10.309] Verifying certificate... [2025-09-23 17:34:10.549] Verified OK [2025-09-23 17:34:10.565] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:34:12.244] Verified OK [2025-09-23 17:34:12.244] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:34:12.833] Verified OK [2025-09-23 17:34:12.833] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:34:15.423] fs.protected_hardlinks = 1 [2025-09-23 17:34:15.439] fs.protected_symlinks = 1 [2025-09-23 17:34:15.439] kernel.modules_disabled = 1 [2025-09-23 17:34:15.647] [2025-09-23 17:34:15.647] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:34:16.906] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:34:24.589] SBL1:1210.0.1.0 [2025-09-23 17:34:24.637] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:34:26.204] SBL2:1210.0.1.0 [2025-09-23 17:34:26.251] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:34:26.347] j-A [2025-09-23 17:34:33.702] The R5 Autosar Classic is running [2025-09-23 17:34:33.727] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:34:33.727] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:34:34.335] INIT: version 2.96 booting [2025-09-23 17:34:34.446] INIT: Entering runlevel: 5 [2025-09-23 17:34:34.739] mtd24 attached [2025-09-23 17:34:34.739] mtd28 attached [2025-09-23 17:34:34.739] mtd32 attached [2025-09-23 17:34:34.739] ubi0:textures is mounted. [2025-09-23 17:34:34.739] RTNETLINK answers: File exists [2025-09-23 17:34:34.739] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:34:34.739] ubi2:dml_code is mounted. [2025-09-23 17:34:34.739] ubi1:animations is mounted. [2025-09-23 17:34:34.739] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:34:34.739] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:34:34.739] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:34:34.739] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:34:34.739] data.LB_FadeInType0=100 [2025-09-23 17:34:34.739] data.CHLH_FadeInType0=0 [2025-09-23 17:34:34.739] data.WU_FadeInDelay=0 [2025-09-23 17:34:34.739] max_time_out=0 [2025-09-23 17:34:34.739] No splash screen [2025-09-23 17:34:34.739] stop dss Done [2025-09-23 17:34:34.783] /dev/mem opened. [2025-09-23 17:34:34.783] Memory mapped at address 0xffffa6c63000. [2025-09-23 17:34:34.820] Read at address 0x00600018 (0xffffa6c63018): 0x00000000 [2025-09-23 17:34:34.820] Write at address 0x00600018 (0xffffa6c63018): 0x00400040, readback 0x00400040 [2025-09-23 17:34:34.820] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:34:34.820] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:34:34.932] Loaded PowerVR consumer services. [2025-09-23 17:34:35.076] Waiting data available... [2025-09-23 17:34:35.092] 512+0 records in [2025-09-23 17:34:35.092] 512+0 records out [2025-09-23 17:34:35.139] Starting syslogd/klogd: done [2025-09-23 17:34:35.155] DML Start [2025-09-23 17:34:35.316] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:34:35.754] DML res1: 0 [2025-09-23 17:34:36.057] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:34:36.057] Read Success [2025-09-23 17:34:36.057] Verifying certificate... [2025-09-23 17:34:36.345] Verified OK [2025-09-23 17:34:36.361] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:34:38.110] Verified OK [2025-09-23 17:34:38.110] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:34:38.623] Verified OK [2025-09-23 17:34:38.623] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:34:41.037] fs.protected_hardlinks = 1 [2025-09-23 17:34:41.037] fs.protected_symlinks = 1 [2025-09-23 17:34:41.053] kernel.modules_disabled = 1 [2025-09-23 17:34:41.244] [2025-09-23 17:34:41.244] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:34:42.587] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:34:50.359] SBL1:1210.0.1.0 [2025-09-23 17:34:50.391] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:34:51.973] SBL2:1210.0.1.0 [2025-09-23 17:34:52.022] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:34:52.118] j-A [2025-09-23 17:34:59.492] The R5 Autosar Classic is running [2025-09-23 17:34:59.492] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:34:59.492] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:35:00.099] INIT: version 2.96 booting [2025-09-23 17:35:00.211] INIT: Entering runlevel: 5 [2025-09-23 17:35:00.537] mtd24 attached [2025-09-23 17:35:00.537] mtd28 attached [2025-09-23 17:35:00.537] mtd32 attached [2025-09-23 17:35:00.537] ubi0:textures is mounted. [2025-09-23 17:35:00.537] RTNETLINK answers: File exists [2025-09-23 17:35:00.537] ubi1:animations is mounted. [2025-09-23 17:35:00.537] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:35:00.537] ubi2:dml_code is mounted. [2025-09-23 17:35:00.537] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:35:00.537] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:35:00.537] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:35:00.537] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:35:00.537] data.LB_FadeInType0=100 [2025-09-23 17:35:00.537] data.CHLH_FadeInType0=0 [2025-09-23 17:35:00.537] data.WU_FadeInDelay=0 [2025-09-23 17:35:00.537] max_time_out=0 [2025-09-23 17:35:00.537] No splash screen [2025-09-23 17:35:00.537] stop dss Done [2025-09-23 17:35:00.570] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:35:00.570] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:35:00.570] /dev/mem opened. [2025-09-23 17:35:00.570] Memory mapped at address 0xffffb82f6000. [2025-09-23 17:35:00.570] Read at address 0x00600018 (0xffffb82f6018): 0x00000000 [2025-09-23 17:35:00.570] Write at address 0x00600018 (0xffffb82f6018): 0x00400040, readback 0x00400040 [2025-09-23 17:35:00.810] Loaded PowerVR consumer services. [2025-09-23 17:35:00.826] Waiting data available... [2025-09-23 17:35:00.858] 512+0 records in [2025-09-23 17:35:00.858] 512+0 records out [2025-09-23 17:35:00.874] Starting syslogd/klogd: done [2025-09-23 17:35:00.907] DML Start [2025-09-23 17:35:01.082] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:35:01.536] DML res1: 0 [2025-09-23 17:35:01.738] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:35:01.759] Read Success [2025-09-23 17:35:01.759] Verifying certificate... [2025-09-23 17:35:01.998] Verified OK [2025-09-23 17:35:02.014] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:35:03.651] Verified OK [2025-09-23 17:35:03.651] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:35:04.288] Verified OK [2025-09-23 17:35:04.288] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:35:06.957] fs.protected_hardlinks = 1 [2025-09-23 17:35:06.973] fs.protected_symlinks = 1 [2025-09-23 17:35:06.989] kernel.modules_disabled = 1 [2025-09-23 17:35:07.165] [2025-09-23 17:35:07.165] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:35:08.364] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:35:16.099] SBL1:1210.0.1.0 [2025-09-23 17:35:16.131] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 17:35:17.714] SBL2:1210.0.1.0 [2025-09-23 17:35:17.746] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:35:17.857] j-A [2025-09-23 17:35:25.233] The R5 Autosar Classic is running [2025-09-23 17:35:25.233] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:35:25.233] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:35:25.839] INIT: version 2.96 booting [2025-09-23 17:35:25.952] INIT: Entering runlevel: 5 [2025-09-23 17:35:26.274] mtd24 attached [2025-09-23 17:35:26.274] mtd28 attached [2025-09-23 17:35:26.274] mtd32 attached [2025-09-23 17:35:26.274] ubi0:textures is mounted. [2025-09-23 17:35:26.274] RTNETLINK answers: File exists [2025-09-23 17:35:26.274] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:35:26.274] ubi1:animations is mounted. [2025-09-23 17:35:26.274] ubi2:dml_code is mounted. [2025-09-23 17:35:26.274] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:35:26.274] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:35:26.274] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:35:26.274] data.LB_FadeInType0=100 [2025-09-23 17:35:26.274] data.CHLH_FadeInType0=0 [2025-09-23 17:35:26.274] data.WU_FadeInDelay=0 [2025-09-23 17:35:26.274] max_time_out=0 [2025-09-23 17:35:26.274] No splash screen [2025-09-23 17:35:26.274] stop dss Done [2025-09-23 17:35:26.274] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:35:26.277] /dev/mem opened. [2025-09-23 17:35:26.319] Memory mapped at address 0xffff89b57000. [2025-09-23 17:35:26.319] Read at address 0x00600018 (0xffff89b57018): 0x00000000 [2025-09-23 17:35:26.319] Write at address 0x00600018 (0xffff89b57018): 0x00400040, readback 0x00400040 [2025-09-23 17:35:26.319] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:35:26.319] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:35:26.400] Loaded PowerVR consumer services. [2025-09-23 17:35:26.576] Waiting data available... [2025-09-23 17:35:26.591] 512+0 records in [2025-09-23 17:35:26.591] 512+0 records out [2025-09-23 17:35:26.623] Starting syslogd/klogd: done [2025-09-23 17:35:26.639] DML Start [2025-09-23 17:35:26.815] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:35:27.055] DML res1: 0 [2025-09-23 17:35:27.472] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:35:27.492] Read Success [2025-09-23 17:35:27.492] Verifying certificate... [2025-09-23 17:35:27.715] Verified OK [2025-09-23 17:35:27.732] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:35:29.243] Verified OK [2025-09-23 17:35:29.243] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:35:30.288] Verified OK [2025-09-23 17:35:30.288] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:35:32.599] fs.protected_hardlinks = 1 [2025-09-23 17:35:32.616] fs.protected_symlinks = 1 [2025-09-23 17:35:32.616] kernel.modules_disabled = 1 [2025-09-23 17:35:32.807] [2025-09-23 17:35:32.807] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:35:34.133] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:35:41.862] SBL1:1210.0.1.0 [2025-09-23 17:35:41.910] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:35:43.476] SBL2:1210.0.1.0 [2025-09-23 17:35:43.525] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:35:43.621] j-A [2025-09-23 17:35:50.976] The R5 Autosar Classic is running [2025-09-23 17:35:50.998] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:35:50.998] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:35:51.606] INIT: version 2.96 booting [2025-09-23 17:35:51.718] INIT: Entering runlevel: 5 [2025-09-23 17:35:51.878] mtd24 attached [2025-09-23 17:35:51.894] mtd28 attached [2025-09-23 17:35:51.910] ubi0:textures is mounted. [2025-09-23 17:35:52.048] mtd32 attached [2025-09-23 17:35:52.048] ubi1:animations is mounted. [2025-09-23 17:35:52.049] RTNETLINK answers: File exists [2025-09-23 17:35:52.049] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:35:52.049] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:35:52.049] ubi2:dml_code is mounted. [2025-09-23 17:35:52.049] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:35:52.049] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:35:52.049] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:35:52.049] data.LB_FadeInType0=100 [2025-09-23 17:35:52.049] data.CHLH_FadeInType0=0 [2025-09-23 17:35:52.049] data.WU_FadeInDelay=0 [2025-09-23 17:35:52.049] max_time_out=0 [2025-09-23 17:35:52.049] No splash screen [2025-09-23 17:35:52.049] stop dss Done [2025-09-23 17:35:52.049] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:35:52.049] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:35:52.049] /dev/mem opened. [2025-09-23 17:35:52.049] Memory mapped at address 0xffffb2d38000. [2025-09-23 17:35:52.071] Read at address 0x00600018 (0xffffb2d38018): 0x00000000 [2025-09-23 17:35:52.071] Write at address 0x00600018 (0xffffb2d38018): 0x00400040, readback 0x00400040 [2025-09-23 17:35:52.166] Loaded PowerVR consumer services. [2025-09-23 17:35:52.326] Waiting data available... [2025-09-23 17:35:52.342] 512+0 records in [2025-09-23 17:35:52.342] 512+0 records out [2025-09-23 17:35:52.374] Starting syslogd/klogd: done [2025-09-23 17:35:52.390] DML Start [2025-09-23 17:35:52.566] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:35:52.790] DML res1: 0 [2025-09-23 17:35:53.282] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:35:53.282] Read Success [2025-09-23 17:35:53.282] Verifying certificate... [2025-09-23 17:35:53.569] Verified OK [2025-09-23 17:35:53.585] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:35:55.246] Verified OK [2025-09-23 17:35:55.246] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:35:55.819] Verified OK [2025-09-23 17:35:55.819] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:35:58.312] fs.protected_hardlinks = 1 [2025-09-23 17:35:58.312] fs.protected_symlinks = 1 [2025-09-23 17:35:58.328] kernel.modules_disabled = 1 [2025-09-23 17:35:58.520] [2025-09-23 17:35:58.520] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:35:59.844] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:36:07.616] SBL1:1210.0.1.0 [2025-09-23 17:36:07.648] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:36:09.232] SBL2:1210.0.1.0 [2025-09-23 17:36:09.277] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:36:09.375] j-A [2025-09-23 17:36:16.752] The R5 Autosar Classic is running [2025-09-23 17:36:16.752] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:36:16.752] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:36:17.360] INIT: version 2.96 booting [2025-09-23 17:36:17.472] INIT: Entering runlevel: 5 [2025-09-23 17:36:17.790] mtd24 attached [2025-09-23 17:36:17.790] mtd28 attached [2025-09-23 17:36:17.790] mtd32 attached [2025-09-23 17:36:17.790] ubi0:textures is mounted. [2025-09-23 17:36:17.790] ubi1:animations is mounted. [2025-09-23 17:36:17.790] RTNETLINK answers: File exists [2025-09-23 17:36:17.790] ubi2:dml_code is mounted. [2025-09-23 17:36:17.790] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:36:17.790] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:36:17.790] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:36:17.790] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:36:17.790] data.LB_FadeInType0=100 [2025-09-23 17:36:17.790] data.CHLH_FadeInType0=0 [2025-09-23 17:36:17.790] data.WU_FadeInDelay=0 [2025-09-23 17:36:17.790] max_time_out=0 [2025-09-23 17:36:17.791] No splash screen [2025-09-23 17:36:17.791] stop dss Done [2025-09-23 17:36:17.791] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:36:17.799] /dev/mem opened. [2025-09-23 17:36:17.799] Memory mapped at address 0xffffb8cd4000. [2025-09-23 17:36:17.825] Read at address 0x00600018 (0xffffb8cd4018): 0x00000000 [2025-09-23 17:36:17.825] Write at address 0x00600018 (0xffffb8cd4018): 0x00400040, readback 0x00400040 [2025-09-23 17:36:17.857] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:36:17.873] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:36:18.049] Loaded PowerVR consumer services. [2025-09-23 17:36:18.128] Waiting data available... [2025-09-23 17:36:18.128] 512+0 records in [2025-09-23 17:36:18.128] 512+0 records out [2025-09-23 17:36:18.160] Starting syslogd/klogd: done [2025-09-23 17:36:18.176] DML Start [2025-09-23 17:36:18.368] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:36:18.576] DML res1: 0 [2025-09-23 17:36:19.034] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:36:19.034] Read Success [2025-09-23 17:36:19.034] Verifying certificate... [2025-09-23 17:36:19.322] Verified OK [2025-09-23 17:36:19.322] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:36:20.993] Verified OK [2025-09-23 17:36:20.993] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:36:21.607] Verified OK [2025-09-23 17:36:21.607] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:36:24.149] fs.protected_hardlinks = 1 [2025-09-23 17:36:24.184] fs.protected_symlinks = 1 [2025-09-23 17:36:24.184] kernel.modules_disabled = 1 [2025-09-23 17:36:24.372] [2025-09-23 17:36:24.372] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:36:25.634] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:36:33.368] SBL1:1210.0.1.0 [2025-09-23 17:36:33.416] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:36:34.983] SBL2:1210.0.1.0 [2025-09-23 17:36:35.028] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:36:35.127] j-A [2025-09-23 17:36:42.482] The R5 Autosar Classic is running [2025-09-23 17:36:42.482] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:36:42.503] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:36:43.111] INIT: version 2.96 booting [2025-09-23 17:36:43.223] INIT: Entering runlevel: 5 [2025-09-23 17:36:43.383] mtd28 attached [2025-09-23 17:36:43.383] mtd24 attached [2025-09-23 17:36:43.399] mtd32 attached [2025-09-23 17:36:43.431] ubi0:animations is mounted. [2025-09-23 17:36:43.553] RTNETLINK answers: File exists [2025-09-23 17:36:43.553] ubi1:textures is mounted. [2025-09-23 17:36:43.553] ubi2:dml_code is mounted. [2025-09-23 17:36:43.553] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:36:43.553] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:36:43.553] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:36:43.553] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:36:43.553] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:36:43.553] data.LB_FadeInType0=100 [2025-09-23 17:36:43.553] data.CHLH_FadeInType0=0 [2025-09-23 17:36:43.553] data.WU_FadeInDelay=0 [2025-09-23 17:36:43.553] max_time_out=0 [2025-09-23 17:36:43.553] No splash screen [2025-09-23 17:36:43.553] stop dss Done [2025-09-23 17:36:43.559] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:36:43.595] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:36:43.595] /dev/mem opened. [2025-09-23 17:36:43.595] Memory mapped at address 0xffff9cd4c000. [2025-09-23 17:36:43.595] Read at address 0x00600018 (0xffff9cd4c018): 0x00000000 [2025-09-23 17:36:43.595] Write at address 0x00600018 (0xffff9cd4c018): 0x00400040, readback 0x00400040 [2025-09-23 17:36:43.674] Loaded PowerVR consumer services. [2025-09-23 17:36:43.834] Waiting data available... [2025-09-23 17:36:43.850] 512+0 records in [2025-09-23 17:36:43.850] 512+0 records out [2025-09-23 17:36:43.882] Starting syslogd/klogd: done [2025-09-23 17:36:43.914] DML Start [2025-09-23 17:36:44.091] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:36:44.557] DML res1: 0 [2025-09-23 17:36:44.728] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:36:44.728] Read Success [2025-09-23 17:36:44.728] Verifying certificate... [2025-09-23 17:36:44.952] Verified OK [2025-09-23 17:36:44.968] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:36:46.583] Verified OK [2025-09-23 17:36:46.583] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:36:47.215] Verified OK [2025-09-23 17:36:47.215] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:36:49.806] fs.protected_hardlinks = 1 [2025-09-23 17:36:49.806] fs.protected_symlinks = 1 [2025-09-23 17:36:49.822] kernel.modules_disabled = 1 [2025-09-23 17:36:50.013] [2025-09-23 17:36:50.013] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:36:51.372] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:36:59.106] SBL1:1210.0.1.0 [2025-09-23 17:36:59.154] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:37:00.720] SBL2:1210.0.1.0 [2025-09-23 17:37:00.768] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:37:00.881] j-A [2025-09-23 17:37:08.220] The R5 Autosar Classic is running [2025-09-23 17:37:08.251] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:37:08.251] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:37:08.859] INIT: version 2.96 booting [2025-09-23 17:37:08.970] INIT: Entering runlevel: 5 [2025-09-23 17:37:09.130] mtd28 attached [2025-09-23 17:37:09.130] mtd24 attached [2025-09-23 17:37:09.146] mtd32 attached [2025-09-23 17:37:09.194] RTNETLINK answers: File exists [2025-09-23 17:37:09.284] ubi1:textures is mounted. [2025-09-23 17:37:09.284] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:37:09.284] ubi0:animations is mounted. [2025-09-23 17:37:09.284] ubi2:dml_code is mounted. [2025-09-23 17:37:09.284] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:37:09.284] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:37:09.284] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:37:09.284] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:37:09.284] data.LB_FadeInType0=100 [2025-09-23 17:37:09.284] data.CHLH_FadeInType0=0 [2025-09-23 17:37:09.284] data.WU_FadeInDelay=0 [2025-09-23 17:37:09.284] max_time_out=0 [2025-09-23 17:37:09.284] No splash screen [2025-09-23 17:37:09.284] stop dss Done [2025-09-23 17:37:09.306] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:37:09.306] /dev/mem opened. [2025-09-23 17:37:09.338] Memory mapped at address 0xffffa05f8000. [2025-09-23 17:37:09.338] Read at address 0x00600018 (0xffffa05f8018): 0x00000000 [2025-09-23 17:37:09.338] Write at address 0x00600018 (0xffffa05f8018): 0x00400040, readback 0x00400040 [2025-09-23 17:37:09.338] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:37:09.434] Loaded PowerVR consumer services. [2025-09-23 17:37:09.578] Waiting data available... [2025-09-23 17:37:09.594] 512+0 records in [2025-09-23 17:37:09.594] 512+0 records out [2025-09-23 17:37:09.641] Starting syslogd/klogd: done [2025-09-23 17:37:09.658] DML Start [2025-09-23 17:37:09.850] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:37:10.105] DML res1: 0 [2025-09-23 17:37:10.457] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:37:10.479] Read Success [2025-09-23 17:37:10.479] Verifying certificate... [2025-09-23 17:37:10.718] Verified OK [2025-09-23 17:37:10.734] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:37:12.393] Verified OK [2025-09-23 17:37:12.393] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:37:13.057] Verified OK [2025-09-23 17:37:13.057] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:37:15.711] fs.protected_hardlinks = 1 [2025-09-23 17:37:15.741] fs.protected_symlinks = 1 [2025-09-23 17:37:15.741] kernel.modules_disabled = 1 [2025-09-23 17:37:15.933] [2025-09-23 17:37:15.933] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:37:17.191] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:37:24.879] SBL1:1210.0.1.0 [2025-09-23 17:37:24.911] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:37:26.494] SBL2:1210.0.1.0 [2025-09-23 17:37:26.531] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:37:26.637] j-A [2025-09-23 17:37:33.976] The R5 Autosar Classic is running [2025-09-23 17:37:34.007] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:37:34.007] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:37:34.615] INIT: version 2.96 booting [2025-09-23 17:37:34.727] INIT: Entering runlevel: 5 [2025-09-23 17:37:35.015] mtd24 attached [2025-09-23 17:37:35.015] mtd28 attached [2025-09-23 17:37:35.015] mtd32 attached [2025-09-23 17:37:35.015] ubi0:textures is mounted. [2025-09-23 17:37:35.015] ubi1:animations is mounted. [2025-09-23 17:37:35.015] RTNETLINK answers: File exists [2025-09-23 17:37:35.015] ubi2:dml_code is mounted. [2025-09-23 17:37:35.015] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:37:35.015] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:37:35.015] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:37:35.015] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:37:35.015] data.LB_FadeInType0=100 [2025-09-23 17:37:35.015] data.CHLH_FadeInType0=0 [2025-09-23 17:37:35.015] data.WU_FadeInDelay=0 [2025-09-23 17:37:35.015] max_time_out=0 [2025-09-23 17:37:35.015] No splash screen [2025-09-23 17:37:35.015] stop dss Done [2025-09-23 17:37:35.015] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:37:35.081] /dev/mem opened. [2025-09-23 17:37:35.081] Memory mapped at address 0xffffaa322000. [2025-09-23 17:37:35.081] Read at address 0x00600018 (0xffffaa322018): 0x00000000 [2025-09-23 17:37:35.081] Write at address 0x00600018 (0xffffaa322018): 0x00400040, readback 0x00400040 [2025-09-23 17:37:35.160] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:37:35.160] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:37:35.257] Loaded PowerVR consumer services. [2025-09-23 17:37:35.353] Waiting data available... [2025-09-23 17:37:35.369] 512+0 records in [2025-09-23 17:37:35.369] 512+0 records out [2025-09-23 17:37:35.417] Starting syslogd/klogd: done [2025-09-23 17:37:35.433] DML Start [2025-09-23 17:37:35.577] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:37:35.833] DML res1: 0 [2025-09-23 17:37:36.223] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:37:36.223] Read Success [2025-09-23 17:37:36.223] Verifying certificate... [2025-09-23 17:37:36.545] Verified OK [2025-09-23 17:37:36.545] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:37:38.078] Verified OK [2025-09-23 17:37:38.078] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:37:38.697] Verified OK [2025-09-23 17:37:38.697] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:37:41.401] fs.protected_hardlinks = 1 [2025-09-23 17:37:41.414] fs.protected_symlinks = 1 [2025-09-23 17:37:41.414] kernel.modules_disabled = 1 [2025-09-23 17:37:41.590] [2025-09-23 17:37:41.590] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:37:42.965] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:37:50.621] SBL1:1210.0.1.0 [2025-09-23 17:37:50.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:37:52.236] SBL2:1210.0.1.0 [2025-09-23 17:37:52.281] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:37:52.380] j-A [2025-09-23 17:37:59.753] The R5 Autosar Classic is running [2025-09-23 17:37:59.753] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:37:59.753] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:38:00.360] INIT: version 2.96 booting [2025-09-23 17:38:00.472] INIT: Entering runlevel: 5 [2025-09-23 17:38:00.798] mtd28 attached [2025-09-23 17:38:00.798] mtd24 attached [2025-09-23 17:38:00.798] mtd32 attached [2025-09-23 17:38:00.798] ubi0:animations is mounted. [2025-09-23 17:38:00.798] RTNETLINK answers: File exists [2025-09-23 17:38:00.798] ubi1:textures is mounted. [2025-09-23 17:38:00.798] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:38:00.798] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:38:00.798] ubi2:dml_code is mounted. [2025-09-23 17:38:00.798] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:38:00.798] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:38:00.798] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:38:00.798] data.LB_FadeInType0=100 [2025-09-23 17:38:00.798] data.CHLH_FadeInType0=0 [2025-09-23 17:38:00.798] data.WU_FadeInDelay=0 [2025-09-23 17:38:00.798] max_time_out=0 [2025-09-23 17:38:00.798] No splash screen [2025-09-23 17:38:00.798] stop dss Done [2025-09-23 17:38:00.824] /dev/mem opened. [2025-09-23 17:38:00.824] Memory mapped at address 0xffff8cd42000. [2025-09-23 17:38:00.824] Read at address 0x00600018 (0xffff8cd42018): 0x00000000 [2025-09-23 17:38:00.824] Write at address 0x00600018 (0xffff8cd42018): 0x00400040, readback 0x00400040 [2025-09-23 17:38:00.840] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:38:00.856] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:38:00.919] Loaded PowerVR consumer services. [2025-09-23 17:38:01.080] Waiting data available... [2025-09-23 17:38:01.096] 512+0 records in [2025-09-23 17:38:01.096] 512+0 records out [2025-09-23 17:38:01.144] Starting syslogd/klogd: done [2025-09-23 17:38:01.160] DML Start [2025-09-23 17:38:01.320] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:38:01.527] DML res1: 0 [2025-09-23 17:38:02.070] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:38:02.070] Read Success [2025-09-23 17:38:02.070] Verifying certificate... [2025-09-23 17:38:02.310] Verified OK [2025-09-23 17:38:02.326] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:38:04.086] Verified OK [2025-09-23 17:38:04.086] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:38:04.588] Verified OK [2025-09-23 17:38:04.588] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:38:07.021] fs.protected_hardlinks = 1 [2025-09-23 17:38:07.021] fs.protected_symlinks = 1 [2025-09-23 17:38:07.021] kernel.modules_disabled = 1 [2025-09-23 17:38:07.226] [2025-09-23 17:38:07.226] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:38:08.631] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:38:16.356] SBL1:1210.0.1.0 [2025-09-23 17:38:16.404] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:38:17.971] SBL2:1210.0.1.0 [2025-09-23 17:38:18.019] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:38:18.131] j-A [2025-09-23 17:38:25.470] The R5 Autosar Classic is running [2025-09-23 17:38:25.501] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:38:25.501] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:38:26.108] INIT: version 2.96 booting [2025-09-23 17:38:26.220] INIT: Entering runlevel: 5 [2025-09-23 17:38:26.518] mtd24 attached [2025-09-23 17:38:26.518] mtd28 attached [2025-09-23 17:38:26.518] mtd32 attached [2025-09-23 17:38:26.518] RTNETLINK answers: File exists [2025-09-23 17:38:26.518] ubi1:animations is mounted. [2025-09-23 17:38:26.518] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:38:26.518] ubi2:dml_code is mounted. [2025-09-23 17:38:26.518] ubi0:textures is mounted. [2025-09-23 17:38:26.518] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:38:26.518] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:38:26.518] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:38:26.518] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:38:26.518] data.LB_FadeInType0=100 [2025-09-23 17:38:26.518] data.CHLH_FadeInType0=0 [2025-09-23 17:38:26.518] data.WU_FadeInDelay=0 [2025-09-23 17:38:26.518] max_time_out=0 [2025-09-23 17:38:26.518] No splash screen [2025-09-23 17:38:26.518] stop dss Done [2025-09-23 17:38:26.557] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:38:26.598] /dev/mem opened. [2025-09-23 17:38:26.598] Memory mapped at address 0xffff882dc000. [2025-09-23 17:38:26.598] Read at address 0x00600018 (0xffff882dc018): 0x00000000 [2025-09-23 17:38:26.598] Write at address 0x00600018 (0xffff882dc018): 0x00400040, readback 0x00400040 [2025-09-23 17:38:26.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:38:26.806] Loaded PowerVR consumer services. [2025-09-23 17:38:26.870] Waiting data available... [2025-09-23 17:38:26.870] 512+0 records in [2025-09-23 17:38:26.886] 512+0 records out [2025-09-23 17:38:26.902] Starting syslogd/klogd: done [2025-09-23 17:38:26.918] DML Start [2025-09-23 17:38:27.078] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:38:27.269] DML res1: 0 [2025-09-23 17:38:27.771] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:38:27.771] Read Success [2025-09-23 17:38:27.771] Verifying certificate... [2025-09-23 17:38:27.994] Verified OK [2025-09-23 17:38:28.026] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:38:29.762] Verified OK [2025-09-23 17:38:29.762] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:38:30.384] Verified OK [2025-09-23 17:38:30.384] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:38:32.941] fs.protected_hardlinks = 1 [2025-09-23 17:38:32.971] fs.protected_symlinks = 1 [2025-09-23 17:38:32.971] kernel.modules_disabled = 1 [2025-09-23 17:38:33.148] [2025-09-23 17:38:33.148] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:38:34.339] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:38:42.130] SBL1:1210.0.1.0 [2025-09-23 17:38:42.162] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:38:43.745] SBL2:1210.0.1.0 [2025-09-23 17:38:43.785] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:38:43.889] j-A [2025-09-23 17:38:51.263] The R5 Autosar Classic is running [2025-09-23 17:38:51.263] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:38:51.263] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:38:51.871] INIT: version 2.96 booting [2025-09-23 17:38:51.982] INIT: Entering runlevel: 5 [2025-09-23 17:38:52.300] mtd32 attached [2025-09-23 17:38:52.300] mtd24 attached [2025-09-23 17:38:52.300] mtd28 attached [2025-09-23 17:38:52.300] ubi0:dml_code is mounted. [2025-09-23 17:38:52.300] ubi1:textures is mounted. [2025-09-23 17:38:52.300] RTNETLINK answers: File exists [2025-09-23 17:38:52.300] ubi2:animations is mounted. [2025-09-23 17:38:52.300] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:38:52.300] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:38:52.300] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:38:52.300] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:38:52.300] data.LB_FadeInType0=100 [2025-09-23 17:38:52.300] data.CHLH_FadeInType0=0 [2025-09-23 17:38:52.300] data.WU_FadeInDelay=0 [2025-09-23 17:38:52.300] max_time_out=0 [2025-09-23 17:38:52.300] No splash screen [2025-09-23 17:38:52.300] stop dss Done [2025-09-23 17:38:52.300] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:38:52.300] /dev/mem opened. [2025-09-23 17:38:52.329] Memory mapped at address 0xffffb6844000. [2025-09-23 17:38:52.329] Read at address 0x00600018 (0xffffb6844018): 0x00000000 [2025-09-23 17:38:52.329] Write at address 0x00600018 (0xffffb6844018): 0x00400040, readback 0x00400040 [2025-09-23 17:38:52.359] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:38:52.359] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:38:52.551] Loaded PowerVR consumer services. [2025-09-23 17:38:52.614] Waiting data available... [2025-09-23 17:38:52.614] 512+0 records in [2025-09-23 17:38:52.630] 512+0 records out [2025-09-23 17:38:52.662] Starting syslogd/klogd: done [2025-09-23 17:38:52.678] DML Start [2025-09-23 17:38:52.855] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:38:53.063] DML res1: 0 [2025-09-23 17:38:53.516] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:38:53.516] Read Success [2025-09-23 17:38:53.516] Verifying certificate... [2025-09-23 17:38:53.772] Verified OK [2025-09-23 17:38:53.772] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:38:55.542] Verified OK [2025-09-23 17:38:55.542] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:38:56.090] Verified OK [2025-09-23 17:38:56.090] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:38:58.665] fs.protected_hardlinks = 1 [2025-09-23 17:38:58.665] fs.protected_symlinks = 1 [2025-09-23 17:38:58.681] kernel.modules_disabled = 1 [2025-09-23 17:38:58.857] [2025-09-23 17:38:58.857] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:39:00.102] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:39:07.874] SBL1:1210.0.1.0 [2025-09-23 17:39:07.922] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:39:09.488] SBL2:1210.0.1.0 [2025-09-23 17:39:09.536] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:39:09.633] j-A [2025-09-23 17:39:16.987] The R5 Autosar Classic is running [2025-09-23 17:39:17.010] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:39:17.010] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:39:17.618] INIT: version 2.96 booting [2025-09-23 17:39:17.729] INIT: Entering runlevel: 5 [2025-09-23 17:39:17.889] mtd32 attached [2025-09-23 17:39:17.905] mtd24 attached [2025-09-23 17:39:17.921] mtd28 attached [2025-09-23 17:39:18.059] ubi0:dml_code is mounted. [2025-09-23 17:39:18.060] RTNETLINK answers: File exists [2025-09-23 17:39:18.060] ubi1:textures is mounted. [2025-09-23 17:39:18.060] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:39:18.060] ubi2:animations is mounted. [2025-09-23 17:39:18.060] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:39:18.060] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:39:18.060] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:39:18.060] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:39:18.060] data.LB_FadeInType0=100 [2025-09-23 17:39:18.060] data.CHLH_FadeInType0=0 [2025-09-23 17:39:18.060] data.WU_FadeInDelay=0 [2025-09-23 17:39:18.060] max_time_out=0 [2025-09-23 17:39:18.060] No splash screen [2025-09-23 17:39:18.060] stop dss Done [2025-09-23 17:39:18.060] /dev/mem opened. [2025-09-23 17:39:18.060] Memory mapped at address 0xffff83063000. [2025-09-23 17:39:18.084] Read at address 0x00600018 (0xffff83063018): 0x00000000 [2025-09-23 17:39:18.084] Write at address 0x00600018 (0xffff83063018): 0x00400040, readback 0x00400040 [2025-09-23 17:39:18.100] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:39:18.116] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:39:18.212] Loaded PowerVR consumer services. [2025-09-23 17:39:18.356] Waiting data available... [2025-09-23 17:39:18.356] 512+0 records in [2025-09-23 17:39:18.356] 512+0 records out [2025-09-23 17:39:18.388] Starting syslogd/klogd: done [2025-09-23 17:39:18.420] DML Start [2025-09-23 17:39:18.611] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:39:18.835] DML res1: 0 [2025-09-23 17:39:19.232] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:39:19.232] Read Success [2025-09-23 17:39:19.232] Verifying certificate... [2025-09-23 17:39:19.472] Verified OK [2025-09-23 17:39:19.488] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:39:21.046] Verified OK [2025-09-23 17:39:21.046] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:39:21.702] Verified OK [2025-09-23 17:39:21.702] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:39:24.340] fs.protected_hardlinks = 1 [2025-09-23 17:39:24.374] fs.protected_symlinks = 1 [2025-09-23 17:39:24.375] kernel.modules_disabled = 1 [2025-09-23 17:39:24.547] [2025-09-23 17:39:24.547] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:39:25.945] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:39:33.628] SBL1:1210.0.1.0 [2025-09-23 17:39:33.660] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:39:35.243] SBL2:1210.0.1.0 [2025-09-23 17:39:35.288] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 17:39:35.386] j-A [2025-09-23 17:39:42.740] The R5 Autosar Classic is running [2025-09-23 17:39:42.740] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:39:42.761] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:39:43.369] INIT: version 2.96 booting [2025-09-23 17:39:43.481] INIT: Entering runlevel: 5 [2025-09-23 17:39:43.641] mtd32 attached [2025-09-23 17:39:43.641] mtd24 attached [2025-09-23 17:39:43.657] mtd28 attached [2025-09-23 17:39:43.688] ubi0:dml_code is mounted. [2025-09-23 17:39:43.812] RTNETLINK answers: File exists [2025-09-23 17:39:43.812] ubi2:animations is mounted. [2025-09-23 17:39:43.812] ubi1:textures is mounted. [2025-09-23 17:39:43.812] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:39:43.812] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:39:43.812] data.LB_FadeInType0=100 [2025-09-23 17:39:43.812] data.CHLH_FadeInType0=0 [2025-09-23 17:39:43.812] data.WU_FadeInDelay=0 [2025-09-23 17:39:43.812] max_time_out=0 [2025-09-23 17:39:43.812] No splash screen [2025-09-23 17:39:43.812] stop dss Done [2025-09-23 17:39:43.812] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:39:43.812] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:39:43.812] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:39:43.812] /dev/mem opened. [2025-09-23 17:39:43.831] Memory mapped at address 0xffffa2ed9000. [2025-09-23 17:39:43.831] Read at address 0x00600018 (0xffffa2ed9018): 0x00000000 [2025-09-23 17:39:43.831] Write at address 0x00600018 (0xffffa2ed9018): 0x00400040, readback 0x00400040 [2025-09-23 17:39:43.847] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:39:43.863] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:39:43.991] Loaded PowerVR consumer services. [2025-09-23 17:39:44.118] Waiting data available... [2025-09-23 17:39:44.134] 512+0 records in [2025-09-23 17:39:44.134] 512+0 records out [2025-09-23 17:39:44.183] Starting syslogd/klogd: done [2025-09-23 17:39:44.199] DML Start [2025-09-23 17:39:44.374] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:39:44.566] DML res1: 0 [2025-09-23 17:39:45.044] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:39:45.044] Read Success [2025-09-23 17:39:45.044] Verifying certificate... [2025-09-23 17:39:45.316] Verified OK [2025-09-23 17:39:45.347] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:39:47.033] Verified OK [2025-09-23 17:39:47.033] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:39:47.582] Verified OK [2025-09-23 17:39:47.582] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:39:50.140] fs.protected_hardlinks = 1 [2025-09-23 17:39:50.140] fs.protected_symlinks = 1 [2025-09-23 17:39:50.156] kernel.modules_disabled = 1 [2025-09-23 17:39:50.348] [2025-09-23 17:39:50.348] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:39:51.627] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:39:59.777] SBL1:1210.0.1.0 [2025-09-23 17:39:59.809] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:40:01.391] SBL2:1210.0.1.0 [2025-09-23 17:40:01.423] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:40:01.535] j-A [2025-09-23 17:40:08.890] The R5 Autosar Classic is running [2025-09-23 17:40:08.890] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:40:08.910] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:40:09.518] INIT: version 2.96 booting [2025-09-23 17:40:09.913] INIT: Entering runlevel: 5 [2025-09-23 17:40:09.913] mtd32 attached [2025-09-23 17:40:09.913] mtd28 attached [2025-09-23 17:40:09.913] mtd24 attached [2025-09-23 17:40:09.913] RTNETLINK answers: File exists [2025-09-23 17:40:09.913] ubi0:dml_code is mounted. [2025-09-23 17:40:09.913] ubi1:animations is mounted. [2025-09-23 17:40:09.913] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:40:09.913] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:40:09.913] ubi2:textures is mounted. [2025-09-23 17:40:09.913] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:40:09.913] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:40:09.913] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:40:09.913] data.LB_FadeInType0=100 [2025-09-23 17:40:09.913] data.CHLH_FadeInType0=0 [2025-09-23 17:40:09.913] data.WU_FadeInDelay=0 [2025-09-23 17:40:09.913] max_time_out=0 [2025-09-23 17:40:09.913] No splash screen [2025-09-23 17:40:09.913] stop dss Done [2025-09-23 17:40:09.939] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:40:09.939] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:40:09.989] /dev/mem opened. [2025-09-23 17:40:09.989] Memory mapped at address 0xffff9b681000. [2025-09-23 17:40:09.989] Read at address 0x00600018 (0xffff9b681018): 0x00000000 [2025-09-23 17:40:09.989] Write at address 0x00600018 (0xffff9b681018): 0x00400040, readback 0x00400040 [2025-09-23 17:40:10.182] Loaded PowerVR consumer services. [2025-09-23 17:40:10.262] Waiting data available... [2025-09-23 17:40:10.277] 512+0 records in [2025-09-23 17:40:10.277] 512+0 records out [2025-09-23 17:40:10.309] Starting syslogd/klogd: done [2025-09-23 17:40:10.325] DML Start [2025-09-23 17:40:10.486] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:40:10.741] DML res1: 0 [2025-09-23 17:40:11.181] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:40:11.181] Read Success [2025-09-23 17:40:11.181] Verifying certificate... [2025-09-23 17:40:11.420] Verified OK [2025-09-23 17:40:11.436] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:40:12.956] Verified OK [2025-09-23 17:40:12.977] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:40:13.636] Verified OK [2025-09-23 17:40:13.636] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:40:16.434] fs.protected_hardlinks = 1 [2025-09-23 17:40:16.434] fs.protected_symlinks = 1 [2025-09-23 17:40:16.450] kernel.modules_disabled = 1 [2025-09-23 17:40:16.626] [2025-09-23 17:40:16.626] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:40:17.760] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:40:25.544] SBL1:1210.0.1.0 [2025-09-23 17:40:25.576] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:40:27.158] SBL2:1210.0.1.0 [2025-09-23 17:40:27.196] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:40:27.302] j-A [2025-09-23 17:40:34.657] The R5 Autosar Classic is running [2025-09-23 17:40:34.657] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:40:34.678] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:40:35.286] INIT: version 2.96 booting [2025-09-23 17:40:35.398] INIT: Entering runlevel: 5 [2025-09-23 17:40:35.542] mtd24 attached [2025-09-23 17:40:35.558] mtd28 attached [2025-09-23 17:40:35.573] mtd32 attached [2025-09-23 17:40:35.590] ubi0:textures is mounted. [2025-09-23 17:40:35.712] RTNETLINK answers: File exists [2025-09-23 17:40:35.713] ubi1:animations is mounted. [2025-09-23 17:40:35.713] ubi2:dml_code is mounted. [2025-09-23 17:40:35.713] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:40:35.713] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:40:35.713] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:40:35.713] data.LB_FadeInType0=100 [2025-09-23 17:40:35.713] data.CHLH_FadeInType0=0 [2025-09-23 17:40:35.713] data.WU_FadeInDelay=0 [2025-09-23 17:40:35.713] max_time_out=0 [2025-09-23 17:40:35.713] No splash screen [2025-09-23 17:40:35.713] stop dss Done [2025-09-23 17:40:35.713] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:40:35.713] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:40:35.715] /dev/mem opened. [2025-09-23 17:40:35.761] Memory mapped at address 0xffffb3375000. [2025-09-23 17:40:35.761] Read at address 0x00600018 (0xffffb3375018): 0x00000000 [2025-09-23 17:40:35.761] Write at address 0x00600018 (0xffffb3375018): 0x00400040, readback 0x00400040 [2025-09-23 17:40:35.761] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:40:35.761] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:40:35.905] Loaded PowerVR consumer services. [2025-09-23 17:40:36.044] Waiting data available... [2025-09-23 17:40:36.044] 512+0 records in [2025-09-23 17:40:36.044] 512+0 records out [2025-09-23 17:40:36.076] Starting syslogd/klogd: done [2025-09-23 17:40:36.092] DML Start [2025-09-23 17:40:36.268] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:40:36.524] DML res1: 0 [2025-09-23 17:40:36.977] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:40:36.977] Read Success [2025-09-23 17:40:36.977] Verifying certificate... [2025-09-23 17:40:37.249] Verified OK [2025-09-23 17:40:37.297] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:40:39.018] Verified OK [2025-09-23 17:40:39.018] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:40:39.589] Verified OK [2025-09-23 17:40:39.589] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:40:42.114] fs.protected_hardlinks = 1 [2025-09-23 17:40:42.114] fs.protected_symlinks = 1 [2025-09-23 17:40:42.114] kernel.modules_disabled = 1 [2025-09-23 17:40:42.290] [2025-09-23 17:40:42.290] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:40:43.578] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:40:51.296] SBL1:1210.0.1.0 [2025-09-23 17:40:51.344] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:40:52.912] SBL2:1210.0.1.0 [2025-09-23 17:40:52.959] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:40:53.071] j-A [2025-09-23 17:41:00.411] The R5 Autosar Classic is running [2025-09-23 17:41:00.436] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:41:00.436] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:41:01.043] INIT: version 2.96 booting [2025-09-23 17:41:01.155] INIT: Entering runlevel: 5 [2025-09-23 17:41:01.315] mtd28 attached [2025-09-23 17:41:01.315] mtd24 attached [2025-09-23 17:41:01.363] mtd32 attached [2025-09-23 17:41:01.379] ubi0:animations is mounted. [2025-09-23 17:41:01.379] ubi1:textures is mounted. [2025-09-23 17:41:01.395] RTNETLINK answers: File exists [2025-09-23 17:41:01.429] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:41:01.429] ubi2:dml_code is mounted. [2025-09-23 17:41:01.429] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:41:01.429] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:41:01.429] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:41:01.429] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:41:01.452] data.LB_FadeInType0=100 [2025-09-23 17:41:01.452] data.CHLH_FadeInType0=0 [2025-09-23 17:41:01.452] data.WU_FadeInDelay=0 [2025-09-23 17:41:01.452] max_time_out=0 [2025-09-23 17:41:01.452] No splash screen [2025-09-23 17:41:01.452] stop dss Done [2025-09-23 17:41:01.500] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:41:01.500] /dev/mem opened. [2025-09-23 17:41:01.532] Memory mapped at address 0xffffa2ee5000. [2025-09-23 17:41:01.532] Read at address 0x00600018 (0xffffa2ee5018): 0x00000000 [2025-09-23 17:41:01.532] Write at address 0x00600018 (0xffffa2ee5018): 0x00400040, readback 0x00400040 [2025-09-23 17:41:01.532] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:41:01.692] Loaded PowerVR consumer services. [2025-09-23 17:41:01.788] Waiting data available... [2025-09-23 17:41:01.804] 512+0 records in [2025-09-23 17:41:01.804] 512+0 records out [2025-09-23 17:41:01.820] Starting syslogd/klogd: done [2025-09-23 17:41:01.852] DML Start [2025-09-23 17:41:02.012] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:41:02.203] DML res1: 0 [2025-09-23 17:41:02.728] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:41:02.728] Read Success [2025-09-23 17:41:02.728] Verifying certificate... [2025-09-23 17:41:02.953] Verified OK [2025-09-23 17:41:02.968] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:41:04.720] Verified OK [2025-09-23 17:41:04.720] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:41:05.320] Verified OK [2025-09-23 17:41:05.320] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:41:07.894] fs.protected_hardlinks = 1 [2025-09-23 17:41:07.920] fs.protected_symlinks = 1 [2025-09-23 17:41:07.920] kernel.modules_disabled = 1 [2025-09-23 17:41:08.096] [2025-09-23 17:41:08.096] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:41:09.247] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:41:17.043] SBL1:1210.0.1.0 [2025-09-23 17:41:17.091] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:41:18.658] SBL2:1210.0.1.0 [2025-09-23 17:41:18.706] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:41:18.819] j-A [2025-09-23 17:41:26.158] The R5 Autosar Classic is running [2025-09-23 17:41:26.183] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:41:26.183] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:41:26.791] INIT: version 2.96 booting [2025-09-23 17:41:26.903] INIT: Entering runlevel: 5 [2025-09-23 17:41:27.062] mtd24 attached [2025-09-23 17:41:27.062] mtd32 attached [2025-09-23 17:41:27.079] mtd28 attached [2025-09-23 17:41:27.127] RTNETLINK answers: File exists [2025-09-23 17:41:27.127] ubi0:textures is mounted. [2025-09-23 17:41:27.190] ubi1:dml_code is mounted. [2025-09-23 17:41:27.190] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:41:27.190] ubi2:animations is mounted. [2025-09-23 17:41:27.190] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:41:27.190] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:41:27.190] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:41:27.190] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:41:27.190] data.LB_FadeInType0=100 [2025-09-23 17:41:27.190] data.CHLH_FadeInType0=0 [2025-09-23 17:41:27.190] data.WU_FadeInDelay=0 [2025-09-23 17:41:27.190] max_time_out=0 [2025-09-23 17:41:27.190] No splash screen [2025-09-23 17:41:27.190] stop dss Done [2025-09-23 17:41:27.222] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:41:27.238] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:41:27.270] /dev/mem opened. [2025-09-23 17:41:27.270] Memory mapped at address 0xffff95eb9000. [2025-09-23 17:41:27.270] Read at address 0x00600018 (0xffff95eb9018): 0x00000000 [2025-09-23 17:41:27.270] Write at address 0x00600018 (0xffff95eb9018): 0x00400040, readback 0x00400040 [2025-09-23 17:41:27.399] Loaded PowerVR consumer services. [2025-09-23 17:41:27.537] Waiting data available... [2025-09-23 17:41:27.537] 512+0 records in [2025-09-23 17:41:27.537] 512+0 records out [2025-09-23 17:41:27.569] Starting syslogd/klogd: done [2025-09-23 17:41:27.585] DML Start [2025-09-23 17:41:27.777] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:41:28.001] DML res1: 0 [2025-09-23 17:41:28.495] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:41:28.495] Read Success [2025-09-23 17:41:28.495] Verifying certificate... [2025-09-23 17:41:28.735] Verified OK [2025-09-23 17:41:28.751] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:41:30.318] Verified OK [2025-09-23 17:41:30.318] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:41:30.925] Verified OK [2025-09-23 17:41:30.925] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:41:33.483] fs.protected_hardlinks = 1 [2025-09-23 17:41:33.483] fs.protected_symlinks = 1 [2025-09-23 17:41:33.499] kernel.modules_disabled = 1 [2025-09-23 17:41:33.691] [2025-09-23 17:41:33.691] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:41:35.034] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:41:42.766] SBL1:1210.0.1.0 [2025-09-23 17:41:42.814] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:41:44.380] SBL2:1210.0.1.0 [2025-09-23 17:41:44.428] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:41:44.541] j-A [2025-09-23 17:41:51.880] The R5 Autosar Classic is running [2025-09-23 17:41:51.905] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:41:51.905] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:41:52.513] INIT: version 2.96 booting [2025-09-23 17:41:52.624] INIT: Entering runlevel: 5 [2025-09-23 17:41:52.768] mtd24 attached [2025-09-23 17:41:52.784] mtd28 attached [2025-09-23 17:41:52.817] mtd32 attached [2025-09-23 17:41:52.886] ubi0:textures is mounted. [2025-09-23 17:41:52.886] ubi1:animations is mounted. [2025-09-23 17:41:52.886] RTNETLINK answers: File exists [2025-09-23 17:41:52.886] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:41:52.886] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:41:52.886] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:41:52.886] ubi2:dml_code is mounted. [2025-09-23 17:41:52.886] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:41:52.886] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:41:52.908] data.LB_FadeInType0=100 [2025-09-23 17:41:52.908] data.CHLH_FadeInType0=0 [2025-09-23 17:41:52.908] data.WU_FadeInDelay=0 [2025-09-23 17:41:52.908] max_time_out=0 [2025-09-23 17:41:52.908] No splash screen [2025-09-23 17:41:52.908] stop dss Done [2025-09-23 17:41:52.940] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:41:52.955] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:41:52.989] /dev/mem opened. [2025-09-23 17:41:52.989] Memory mapped at address 0xffff8bca7000. [2025-09-23 17:41:52.989] Read at address 0x00600018 (0xffff8bca7018): 0x00000000 [2025-09-23 17:41:52.989] Write at address 0x00600018 (0xffff8bca7018): 0x00400040, readback 0x00400040 [2025-09-23 17:41:53.086] Loaded PowerVR consumer services. [2025-09-23 17:41:53.246] Waiting data available... [2025-09-23 17:41:53.262] 512+0 records in [2025-09-23 17:41:53.262] 512+0 records out [2025-09-23 17:41:53.277] Starting syslogd/klogd: done [2025-09-23 17:41:53.309] DML Start [2025-09-23 17:41:53.501] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:41:53.725] DML res1: 0 [2025-09-23 17:41:54.125] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:41:54.145] Read Success [2025-09-23 17:41:54.145] Verifying certificate... [2025-09-23 17:41:54.386] Verified OK [2025-09-23 17:41:54.401] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:41:56.064] Verified OK [2025-09-23 17:41:56.064] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:41:56.687] Verified OK [2025-09-23 17:41:56.704] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:41:59.342] fs.protected_hardlinks = 1 [2025-09-23 17:41:59.357] fs.protected_symlinks = 1 [2025-09-23 17:41:59.357] kernel.modules_disabled = 1 [2025-09-23 17:41:59.566] [2025-09-23 17:41:59.566] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:42:00.792] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:42:08.484] SBL1:1210.0.1.0 [2025-09-23 17:42:08.516] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:42:10.099] SBL2:1210.0.1.0 [2025-09-23 17:42:10.130] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:42:10.243] j-A [2025-09-23 17:42:17.614] The R5 Autosar Classic is running [2025-09-23 17:42:17.614] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:42:17.615] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:42:18.223] INIT: version 2.96 booting [2025-09-23 17:42:18.334] INIT: Entering runlevel: 5 [2025-09-23 17:42:18.479] mtd24 attached [2025-09-23 17:42:18.495] mtd28 attached [2025-09-23 17:42:18.511] mtd32 attached [2025-09-23 17:42:18.559] RTNETLINK answers: File exists [2025-09-23 17:42:18.559] ubi1:animations is mounted. [2025-09-23 17:42:18.596] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:42:18.596] ubi0:textures is mounted. [2025-09-23 17:42:18.596] ubi2:dml_code is mounted. [2025-09-23 17:42:18.596] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:42:18.596] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:42:18.596] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:42:18.596] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:42:18.618] data.LB_FadeInType0=100 [2025-09-23 17:42:18.618] data.CHLH_FadeInType0=0 [2025-09-23 17:42:18.618] data.WU_FadeInDelay=0 [2025-09-23 17:42:18.618] max_time_out=0 [2025-09-23 17:42:18.618] No splash screen [2025-09-23 17:42:18.618] stop dss Done [2025-09-23 17:42:18.704] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:42:18.704] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:42:18.704] /dev/mem opened. [2025-09-23 17:42:18.704] Memory mapped at address 0xffff813ba000. [2025-09-23 17:42:18.704] Read at address 0x00600018 (0xffff813ba018): 0x00000000 [2025-09-23 17:42:18.704] Write at address 0x00600018 (0xffff813ba018): 0x00400040, readback 0x00400040 [2025-09-23 17:42:18.928] Loaded PowerVR consumer services. [2025-09-23 17:42:18.944] Waiting data available... [2025-09-23 17:42:18.960] 512+0 records in [2025-09-23 17:42:18.976] 512+0 records out [2025-09-23 17:42:19.008] Starting syslogd/klogd: done [2025-09-23 17:42:19.040] DML Start [2025-09-23 17:42:19.200] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:42:19.424] DML res1: 0 [2025-09-23 17:42:19.901] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:42:19.901] Read Success [2025-09-23 17:42:19.901] Verifying certificate... [2025-09-23 17:42:20.189] Verified OK [2025-09-23 17:42:20.221] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:42:21.867] Verified OK [2025-09-23 17:42:21.867] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:42:22.474] Verified OK [2025-09-23 17:42:22.474] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:42:24.921] fs.protected_hardlinks = 1 [2025-09-23 17:42:24.937] fs.protected_symlinks = 1 [2025-09-23 17:42:24.937] kernel.modules_disabled = 1 [2025-09-23 17:42:25.145] [2025-09-23 17:42:25.145] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:42:26.455] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:42:34.216] SBL1:1210.0.1.0 [2025-09-23 17:42:34.248] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:42:35.831] SBL2:1210.0.1.0 [2025-09-23 17:42:35.862] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:42:35.974] j-A [2025-09-23 17:42:43.349] The R5 Autosar Classic is running [2025-09-23 17:42:43.349] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:42:43.349] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:42:43.957] INIT: version 2.96 booting [2025-09-23 17:42:44.069] INIT: Entering runlevel: 5 [2025-09-23 17:42:44.228] mtd28 attached [2025-09-23 17:42:44.228] mtd24 attached [2025-09-23 17:42:44.260] mtd32 attached [2025-09-23 17:42:44.293] RTNETLINK answers: File exists [2025-09-23 17:42:44.357] ubi0:animations is mounted. [2025-09-23 17:42:44.357] ubi2:dml_code is mounted. [2025-09-23 17:42:44.357] ubi1:textures is mounted. [2025-09-23 17:42:44.357] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:42:44.357] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:42:44.357] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:42:44.357] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:42:44.357] data.LB_FadeInType0=100 [2025-09-23 17:42:44.357] data.CHLH_FadeInType0=0 [2025-09-23 17:42:44.357] data.WU_FadeInDelay=0 [2025-09-23 17:42:44.357] max_time_out=0 [2025-09-23 17:42:44.357] No splash screen [2025-09-23 17:42:44.357] stop dss Done [2025-09-23 17:42:44.357] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:42:44.405] /dev/mem opened. [2025-09-23 17:42:44.437] Memory mapped at address 0xffffb9123000. [2025-09-23 17:42:44.437] Read at address 0x00600018 (0xffffb9123018): 0x00000000 [2025-09-23 17:42:44.437] Write at address 0x00600018 (0xffffb9123018): 0x00400040, readback 0x00400040 [2025-09-23 17:42:44.437] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:42:44.453] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:42:44.516] Loaded PowerVR consumer services. [2025-09-23 17:42:44.692] Waiting data available... [2025-09-23 17:42:44.708] 512+0 records in [2025-09-23 17:42:44.708] 512+0 records out [2025-09-23 17:42:44.756] Starting syslogd/klogd: done [2025-09-23 17:42:44.772] DML Start [2025-09-23 17:42:44.932] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:42:45.140] DML res1: 0 [2025-09-23 17:42:45.603] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:42:45.619] Read Success [2025-09-23 17:42:45.619] Verifying certificate... [2025-09-23 17:42:45.875] Verified OK [2025-09-23 17:42:45.907] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:42:47.570] Verified OK [2025-09-23 17:42:47.570] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:42:48.193] Verified OK [2025-09-23 17:42:48.193] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:42:50.846] fs.protected_hardlinks = 1 [2025-09-23 17:42:50.846] fs.protected_symlinks = 1 [2025-09-23 17:42:50.846] kernel.modules_disabled = 1 [2025-09-23 17:42:51.022] [2025-09-23 17:42:51.022] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:42:52.193] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:42:59.916] SBL1:1210.0.1.0 [2025-09-23 17:42:59.964] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:43:01.531] SBL2:1210.0.1.0 [2025-09-23 17:43:01.579] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:43:01.675] j-A [2025-09-23 17:43:09.031] The R5 Autosar Classic is running [2025-09-23 17:43:09.053] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:43:09.053] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:43:09.660] INIT: version 2.96 booting [2025-09-23 17:43:09.772] INIT: Entering runlevel: 5 [2025-09-23 17:43:09.932] mtd28 attached [2025-09-23 17:43:09.932] mtd24 attached [2025-09-23 17:43:09.948] mtd32 attached [2025-09-23 17:43:10.065] RTNETLINK answers: File exists [2025-09-23 17:43:10.065] ubi1:textures is mounted. [2025-09-23 17:43:10.065] ubi0:animations is mounted. [2025-09-23 17:43:10.065] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:43:10.065] ubi2:dml_code is mounted. [2025-09-23 17:43:10.065] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:43:10.065] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:43:10.065] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:43:10.065] data.LB_FadeInType0=100 [2025-09-23 17:43:10.065] data.CHLH_FadeInType0=0 [2025-09-23 17:43:10.065] data.WU_FadeInDelay=0 [2025-09-23 17:43:10.065] max_time_out=0 [2025-09-23 17:43:10.065] No splash screen [2025-09-23 17:43:10.065] stop dss Done [2025-09-23 17:43:10.065] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:43:10.148] /dev/mem opened. [2025-09-23 17:43:10.148] Memory mapped at address 0xffff829d8000. [2025-09-23 17:43:10.148] Read at address 0x00600018 (0xffff829d8018): 0x00000000 [2025-09-23 17:43:10.148] Write at address 0x00600018 (0xffff829d8018): 0x00400040, readback 0x00400040 [2025-09-23 17:43:10.148] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:43:10.148] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:43:10.212] Loaded PowerVR consumer services. [2025-09-23 17:43:10.403] Waiting data available... [2025-09-23 17:43:10.419] 512+0 records in [2025-09-23 17:43:10.419] 512+0 records out [2025-09-23 17:43:10.435] Starting syslogd/klogd: done [2025-09-23 17:43:10.468] DML Start [2025-09-23 17:43:10.612] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:43:10.836] DML res1: 0 [2025-09-23 17:43:11.251] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:43:11.273] Read Success [2025-09-23 17:43:11.273] Verifying certificate... [2025-09-23 17:43:11.480] Verified OK [2025-09-23 17:43:11.496] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:43:13.184] Verified OK [2025-09-23 17:43:13.184] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:43:13.785] Verified OK [2025-09-23 17:43:13.785] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:43:16.407] fs.protected_hardlinks = 1 [2025-09-23 17:43:16.407] fs.protected_symlinks = 1 [2025-09-23 17:43:16.423] kernel.modules_disabled = 1 [2025-09-23 17:43:16.616] [2025-09-23 17:43:16.616] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:43:17.870] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:43:25.647] SBL1:1210.0.1.0 [2025-09-23 17:43:25.695] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:43:27.261] SBL2:1210.0.1.0 [2025-09-23 17:43:27.309] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:43:27.405] j-A [2025-09-23 17:43:34.760] The R5 Autosar Classic is running [2025-09-23 17:43:34.785] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:43:34.785] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:43:35.393] INIT: version 2.96 booting [2025-09-23 17:43:35.505] INIT: Entering runlevel: 5 [2025-09-23 17:43:35.665] mtd28 attached [2025-09-23 17:43:35.665] mtd24 attached [2025-09-23 17:43:35.681] mtd32 attached [2025-09-23 17:43:35.729] RTNETLINK answers: File exists [2025-09-23 17:43:35.729] ubi0:animations is mounted. [2025-09-23 17:43:35.794] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:43:35.794] ubi1:textures is mounted. [2025-09-23 17:43:35.794] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:43:35.794] ubi2:dml_code is mounted. [2025-09-23 17:43:35.794] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:43:35.794] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:43:35.794] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:43:35.794] data.LB_FadeInType0=100 [2025-09-23 17:43:35.794] data.CHLH_FadeInType0=0 [2025-09-23 17:43:35.794] data.WU_FadeInDelay=0 [2025-09-23 17:43:35.794] max_time_out=0 [2025-09-23 17:43:35.794] No splash screen [2025-09-23 17:43:35.794] stop dss Done [2025-09-23 17:43:35.810] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:43:35.850] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:43:35.850] /dev/mem opened. [2025-09-23 17:43:35.850] Memory mapped at address 0xffff9a8d9000. [2025-09-23 17:43:35.850] Read at address 0x00600018 (0xffff9a8d9018): 0x00000000 [2025-09-23 17:43:35.850] Write at address 0x00600018 (0xffff9a8d9018): 0x00400040, readback 0x00400040 [2025-09-23 17:43:36.154] Loaded PowerVR consumer services. [2025-09-23 17:43:36.154] Waiting data available... [2025-09-23 17:43:36.170] 512+0 records in [2025-09-23 17:43:36.186] 512+0 records out [2025-09-23 17:43:36.202] Starting syslogd/klogd: done [2025-09-23 17:43:36.218] DML Start [2025-09-23 17:43:36.426] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:43:36.650] DML res1: 0 [2025-09-23 17:43:37.031] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:43:37.031] Read Success [2025-09-23 17:43:37.031] Verifying certificate... [2025-09-23 17:43:37.288] Verified OK [2025-09-23 17:43:37.288] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:43:39.020] Verified OK [2025-09-23 17:43:39.020] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:43:39.688] Verified OK [2025-09-23 17:43:39.688] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:43:42.230] fs.protected_hardlinks = 1 [2025-09-23 17:43:42.230] fs.protected_symlinks = 1 [2025-09-23 17:43:42.246] kernel.modules_disabled = 1 [2025-09-23 17:43:42.439] [2025-09-23 17:43:42.439] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:43:43.718] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:43:51.386] SBL1:1210.0.1.0 [2025-09-23 17:43:51.417] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 17:43:53.000] SBL2:1210.0.1.0 [2025-09-23 17:43:53.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:43:53.144] j-A [2025-09-23 17:44:00.499] The R5 Autosar Classic is running [2025-09-23 17:44:00.499] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:44:00.519] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:44:01.128] INIT: version 2.96 booting [2025-09-23 17:44:01.239] INIT: Entering runlevel: 5 [2025-09-23 17:44:01.399] mtd32 attached [2025-09-23 17:44:01.399] mtd28 attached [2025-09-23 17:44:01.415] mtd24 attached [2025-09-23 17:44:01.463] RTNETLINK answers: File exists [2025-09-23 17:44:01.522] ubi0:dml_code is mounted. [2025-09-23 17:44:01.522] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:44:01.522] ubi1:animations is mounted. [2025-09-23 17:44:01.522] ubi2:textures is mounted. [2025-09-23 17:44:01.522] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:44:01.522] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:44:01.522] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:44:01.522] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:44:01.522] data.LB_FadeInType0=100 [2025-09-23 17:44:01.522] data.CHLH_FadeInType0=0 [2025-09-23 17:44:01.522] data.WU_FadeInDelay=0 [2025-09-23 17:44:01.522] max_time_out=0 [2025-09-23 17:44:01.522] No splash screen [2025-09-23 17:44:01.522] stop dss Done [2025-09-23 17:44:01.567] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:44:01.567] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:44:01.567] /dev/mem opened. [2025-09-23 17:44:01.599] Memory mapped at address 0xffffb67fc000. [2025-09-23 17:44:01.599] Read at address 0x00600018 (0xffffb67fc018): 0x00000000 [2025-09-23 17:44:01.599] Write at address 0x00600018 (0xffffb67fc018): 0x00400040, readback 0x00400040 [2025-09-23 17:44:01.695] Loaded PowerVR consumer services. [2025-09-23 17:44:01.854] Waiting data available... [2025-09-23 17:44:01.886] 512+0 records in [2025-09-23 17:44:01.886] 512+0 records out [2025-09-23 17:44:01.919] Starting syslogd/klogd: done [2025-09-23 17:44:01.935] DML Start [2025-09-23 17:44:02.143] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:44:02.366] DML res1: 0 [2025-09-23 17:44:02.750] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:44:02.766] Read Success [2025-09-23 17:44:02.766] Verifying certificate... [2025-09-23 17:44:02.990] Verified OK [2025-09-23 17:44:03.022] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:44:04.824] Verified OK [2025-09-23 17:44:04.824] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:44:05.408] Verified OK [2025-09-23 17:44:05.408] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:44:07.918] fs.protected_hardlinks = 1 [2025-09-23 17:44:07.934] fs.protected_symlinks = 1 [2025-09-23 17:44:07.934] kernel.modules_disabled = 1 [2025-09-23 17:44:08.142] [2025-09-23 17:44:08.142] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:44:09.450] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:44:17.099] SBL1:1210.0.1.0 [2025-09-23 17:44:17.146] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:44:18.713] SBL2:1210.0.1.0 [2025-09-23 17:44:18.761] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:44:18.857] j-A [2025-09-23 17:44:26.211] The R5 Autosar Classic is running [2025-09-23 17:44:26.233] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:44:26.233] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:44:26.617] INIT: version 2.96 booting [2025-09-23 17:44:26.953] INIT: Entering runlevel: 5 [2025-09-23 17:44:27.113] mtd28 attached [2025-09-23 17:44:27.113] mtd32 attached [2025-09-23 17:44:27.129] mtd24 attached [2025-09-23 17:44:27.212] RTNETLINK answers: File exists [2025-09-23 17:44:27.212] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:44:27.212] ubi0:animations is mounted. [2025-09-23 17:44:27.212] ubi1:dml_code is mounted. [2025-09-23 17:44:27.212] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:44:27.212] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:44:27.212] ubi2:textures is mounted. [2025-09-23 17:44:27.212] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:44:27.212] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:44:27.228] data.LB_FadeInType0=100 [2025-09-23 17:44:27.228] data.CHLH_FadeInType0=0 [2025-09-23 17:44:27.228] data.WU_FadeInDelay=0 [2025-09-23 17:44:27.249] max_time_out=0 [2025-09-23 17:44:27.249] No splash screen [2025-09-23 17:44:27.249] stop dss Done [2025-09-23 17:44:27.265] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:44:27.265] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:44:27.313] /dev/mem opened. [2025-09-23 17:44:27.313] Memory mapped at address 0xffff858a9000. [2025-09-23 17:44:27.313] Read at address 0x00600018 (0xffff858a9018): 0x00000000 [2025-09-23 17:44:27.313] Write at address 0x00600018 (0xffff858a9018): 0x00400040, readback 0x00400040 [2025-09-23 17:44:27.456] Loaded PowerVR consumer services. [2025-09-23 17:44:27.569] Waiting data available... [2025-09-23 17:44:27.585] 512+0 records in [2025-09-23 17:44:27.585] 512+0 records out [2025-09-23 17:44:27.632] Starting syslogd/klogd: done [2025-09-23 17:44:27.648] DML Start [2025-09-23 17:44:27.824] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:44:28.080] DML res1: 0 [2025-09-23 17:44:28.489] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:44:28.489] Read Success [2025-09-23 17:44:28.489] Verifying certificate... [2025-09-23 17:44:28.713] Verified OK [2025-09-23 17:44:28.729] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:44:30.503] Verified OK [2025-09-23 17:44:30.525] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:44:30.996] Verified OK [2025-09-23 17:44:30.996] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:44:33.394] fs.protected_hardlinks = 1 [2025-09-23 17:44:33.394] fs.protected_symlinks = 1 [2025-09-23 17:44:33.410] kernel.modules_disabled = 1 [2025-09-23 17:44:33.602] [2025-09-23 17:44:33.602] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:44:35.153] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:44:42.803] SBL1:1210.0.1.0 [2025-09-23 17:44:42.835] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:44:44.418] SBL2:1210.0.1.0 [2025-09-23 17:44:44.450] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:44:44.561] j-A [2025-09-23 17:44:51.916] The R5 Autosar Classic is running [2025-09-23 17:44:51.916] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:44:51.936] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:44:52.544] INIT: version 2.96 booting [2025-09-23 17:44:52.656] INIT: Entering runlevel: 5 [2025-09-23 17:44:52.817] mtd32 attached [2025-09-23 17:44:52.833] mtd24 attached [2025-09-23 17:44:52.833] mtd28 attached [2025-09-23 17:44:52.880] RTNETLINK answers: File exists [2025-09-23 17:44:52.880] ubi0:dml_code is mounted. [2025-09-23 17:44:52.925] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:44:52.925] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:44:52.925] ubi1:textures is mounted. [2025-09-23 17:44:52.925] ubi2:animations is mounted. [2025-09-23 17:44:52.925] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:44:52.925] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:44:52.925] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:44:52.947] data.LB_FadeInType0=100 [2025-09-23 17:44:52.947] data.CHLH_FadeInType0=0 [2025-09-23 17:44:52.947] data.WU_FadeInDelay=0 [2025-09-23 17:44:52.947] max_time_out=0 [2025-09-23 17:44:52.947] No splash screen [2025-09-23 17:44:52.947] stop dss Done [2025-09-23 17:44:52.978] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:44:52.978] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:44:53.013] /dev/mem opened. [2025-09-23 17:44:53.013] Memory mapped at address 0xffffab733000. [2025-09-23 17:44:53.013] Read at address 0x00600018 (0xffffab733018): 0x00000000 [2025-09-23 17:44:53.013] Write at address 0x00600018 (0xffffab733018): 0x00400040, readback 0x00400040 [2025-09-23 17:44:53.253] Loaded PowerVR consumer services. [2025-09-23 17:44:53.301] Waiting data available... [2025-09-23 17:44:53.333] 512+0 records in [2025-09-23 17:44:53.333] 512+0 records out [2025-09-23 17:44:53.381] Starting syslogd/klogd: done [2025-09-23 17:44:53.381] DML Start [2025-09-23 17:44:53.573] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:44:53.828] DML res1: 0 [2025-09-23 17:44:54.196] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:44:54.217] Read Success [2025-09-23 17:44:54.217] Verifying certificate... [2025-09-23 17:44:54.473] Verified OK [2025-09-23 17:44:54.489] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:44:56.136] Verified OK [2025-09-23 17:44:56.157] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:44:56.723] Verified OK [2025-09-23 17:44:56.723] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:44:59.169] fs.protected_hardlinks = 1 [2025-09-23 17:44:59.169] fs.protected_symlinks = 1 [2025-09-23 17:44:59.185] kernel.modules_disabled = 1 [2025-09-23 17:44:59.377] [2025-09-23 17:44:59.377] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:45:00.909] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:45:08.515] SBL1:1210.0.1.0 [2025-09-23 17:45:08.563] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:45:10.130] SBL2:1210.0.1.0 [2025-09-23 17:45:10.177] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:45:10.274] j-A [2025-09-23 17:45:17.628] The R5 Autosar Classic is running [2025-09-23 17:45:17.651] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:45:17.651] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:45:18.258] INIT: version 2.96 booting [2025-09-23 17:45:18.371] INIT: Entering runlevel: 5 [2025-09-23 17:45:18.530] mtd28 attached [2025-09-23 17:45:18.530] mtd24 attached [2025-09-23 17:45:18.546] mtd32 attached [2025-09-23 17:45:18.656] ubi0:animations is mounted. [2025-09-23 17:45:18.656] ubi1:textures is mounted. [2025-09-23 17:45:18.656] RTNETLINK answers: File exists [2025-09-23 17:45:18.656] ubi2:dml_code is mounted. [2025-09-23 17:45:18.656] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:45:18.656] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:45:18.656] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:45:18.656] data.LB_FadeInType0=100 [2025-09-23 17:45:18.656] data.CHLH_FadeInType0=0 [2025-09-23 17:45:18.656] data.WU_FadeInDelay=0 [2025-09-23 17:45:18.656] max_time_out=0 [2025-09-23 17:45:18.656] No splash screen [2025-09-23 17:45:18.656] stop dss Done [2025-09-23 17:45:18.656] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:45:18.656] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:45:18.744] /dev/mem opened. [2025-09-23 17:45:18.744] Memory mapped at address 0xffffad640000. [2025-09-23 17:45:18.744] Read at address 0x00600018 (0xffffad640018): 0x00000000 [2025-09-23 17:45:18.744] Write at address 0x00600018 (0xffffad640018): 0x00400040, readback 0x00400040 [2025-09-23 17:45:18.791] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:45:18.823] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:45:18.967] Loaded PowerVR consumer services. [2025-09-23 17:45:19.046] Waiting data available... [2025-09-23 17:45:19.046] 512+0 records in [2025-09-23 17:45:19.046] 512+0 records out [2025-09-23 17:45:19.062] Starting syslogd/klogd: done [2025-09-23 17:45:19.078] DML Start [2025-09-23 17:45:19.254] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:45:19.429] DML res1: 0 [2025-09-23 17:45:19.925] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:45:19.946] Read Success [2025-09-23 17:45:19.946] Verifying certificate... [2025-09-23 17:45:20.186] Verified OK [2025-09-23 17:45:20.186] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:45:21.801] Verified OK [2025-09-23 17:45:21.801] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:45:22.438] Verified OK [2025-09-23 17:45:22.438] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:45:25.206] fs.protected_hardlinks = 1 [2025-09-23 17:45:25.221] fs.protected_symlinks = 1 [2025-09-23 17:45:25.221] kernel.modules_disabled = 1 [2025-09-23 17:45:25.413] [2025-09-23 17:45:25.413] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:45:26.513] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:45:34.220] SBL1:1210.0.1.0 [2025-09-23 17:45:34.268] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:45:35.835] SBL2:1210.0.1.0 [2025-09-23 17:45:35.882] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:45:35.978] j-A [2025-09-23 17:45:43.333] The R5 Autosar Classic is running [2025-09-23 17:45:43.358] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:45:43.358] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:45:43.966] INIT: version 2.96 booting [2025-09-23 17:45:44.077] INIT: Entering runlevel: 5 [2025-09-23 17:45:44.221] mtd24 attached [2025-09-23 17:45:44.237] mtd28 attached [2025-09-23 17:45:44.297] mtd32 attached [2025-09-23 17:45:44.297] ubi0:textures is mounted. [2025-09-23 17:45:44.297] ubi1:animations is mounted. [2025-09-23 17:45:44.297] RTNETLINK answers: File exists [2025-09-23 17:45:44.344] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:45:44.344] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:45:44.344] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:45:44.344] ubi2:dml_code is mounted. [2025-09-23 17:45:44.344] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:45:44.344] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:45:44.344] data.LB_FadeInType0=100 [2025-09-23 17:45:44.365] data.CHLH_FadeInType0=0 [2025-09-23 17:45:44.365] data.WU_FadeInDelay=0 [2025-09-23 17:45:44.365] max_time_out=0 [2025-09-23 17:45:44.365] No splash screen [2025-09-23 17:45:44.365] stop dss Done [2025-09-23 17:45:44.411] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:45:44.411] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:45:44.446] /dev/mem opened. [2025-09-23 17:45:44.446] Memory mapped at address 0xffff910d2000. [2025-09-23 17:45:44.446] Read at address 0x00600018 (0xffff910d2018): 0x00000000 [2025-09-23 17:45:44.446] Write at address 0x00600018 (0xffff910d2018): 0x00400040, readback 0x00400040 [2025-09-23 17:45:44.621] Loaded PowerVR consumer services. [2025-09-23 17:45:44.717] Waiting data available... [2025-09-23 17:45:44.717] 512+0 records in [2025-09-23 17:45:44.734] 512+0 records out [2025-09-23 17:45:44.750] Starting syslogd/klogd: done [2025-09-23 17:45:44.766] DML Start [2025-09-23 17:45:44.926] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:45:45.134] DML res1: 0 [2025-09-23 17:45:45.581] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:45:45.597] Read Success [2025-09-23 17:45:45.597] Verifying certificate... [2025-09-23 17:45:45.854] Verified OK [2025-09-23 17:45:45.854] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:45:47.529] Verified OK [2025-09-23 17:45:47.529] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:45:48.159] Verified OK [2025-09-23 17:45:48.159] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:45:50.798] fs.protected_hardlinks = 1 [2025-09-23 17:45:50.814] fs.protected_symlinks = 1 [2025-09-23 17:45:50.814] kernel.modules_disabled = 1 [2025-09-23 17:45:51.006] [2025-09-23 17:45:51.006] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:45:52.248] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:45:59.937] SBL1:1210.0.1.0 [2025-09-23 17:45:59.986] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:46:01.553] SBL2:1210.0.1.0 [2025-09-23 17:46:01.600] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:46:01.696] j-A [2025-09-23 17:46:09.051] The R5 Autosar Classic is running [2025-09-23 17:46:09.075] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:46:09.075] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:46:09.683] INIT: version 2.96 booting [2025-09-23 17:46:09.794] INIT: Entering runlevel: 5 [2025-09-23 17:46:09.955] mtd24 attached [2025-09-23 17:46:09.971] mtd28 attached [2025-09-23 17:46:09.971] mtd32 attached [2025-09-23 17:46:10.003] ubi0:textures is mounted. [2025-09-23 17:46:10.083] ubi1:animations is mounted. [2025-09-23 17:46:10.083] RTNETLINK answers: File exists [2025-09-23 17:46:10.083] ubi2:dml_code is mounted. [2025-09-23 17:46:10.083] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:46:10.083] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:46:10.083] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:46:10.083] data.LB_FadeInType0=100 [2025-09-23 17:46:10.083] data.CHLH_FadeInType0=0 [2025-09-23 17:46:10.083] data.WU_FadeInDelay=0 [2025-09-23 17:46:10.083] max_time_out=0 [2025-09-23 17:46:10.083] No splash screen [2025-09-23 17:46:10.083] stop dss Done [2025-09-23 17:46:10.083] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:46:10.083] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:46:10.115] /dev/mem opened. [2025-09-23 17:46:10.115] Memory mapped at address 0xffffba0eb000. [2025-09-23 17:46:10.141] Read at address 0x00600018 (0xffffba0eb018): 0x00000000 [2025-09-23 17:46:10.141] Write at address 0x00600018 (0xffffba0eb018): 0x00400040, readback 0x00400040 [2025-09-23 17:46:10.157] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:46:10.189] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:46:10.269] Loaded PowerVR consumer services. [2025-09-23 17:46:10.444] Waiting data available... [2025-09-23 17:46:10.444] 512+0 records in [2025-09-23 17:46:10.444] 512+0 records out [2025-09-23 17:46:10.476] Starting syslogd/klogd: done [2025-09-23 17:46:10.492] DML Start [2025-09-23 17:46:10.668] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:46:10.892] DML res1: 0 [2025-09-23 17:46:11.365] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:46:11.365] Read Success [2025-09-23 17:46:11.365] Verifying certificate... [2025-09-23 17:46:11.604] Verified OK [2025-09-23 17:46:11.620] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:46:13.439] Verified OK [2025-09-23 17:46:13.439] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:46:13.952] Verified OK [2025-09-23 17:46:13.952] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:46:16.478] fs.protected_hardlinks = 1 [2025-09-23 17:46:16.494] fs.protected_symlinks = 1 [2025-09-23 17:46:16.494] kernel.modules_disabled = 1 [2025-09-23 17:46:16.701] [2025-09-23 17:46:16.701] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:46:17.933] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:46:25.657] SBL1:1210.0.1.0 [2025-09-23 17:46:25.705] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:46:27.271] SBL2:1210.0.1.0 [2025-09-23 17:46:27.319] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:46:27.416] j-A [2025-09-23 17:46:34.771] The R5 Autosar Classic is running [2025-09-23 17:46:34.794] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:46:34.794] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:46:35.402] INIT: version 2.96 booting [2025-09-23 17:46:35.514] INIT: Entering runlevel: 5 [2025-09-23 17:46:35.674] mtd28 attached [2025-09-23 17:46:35.674] mtd32 attached [2025-09-23 17:46:35.690] mtd24 attached [2025-09-23 17:46:35.706] ubi0:animations is mounted. [2025-09-23 17:46:35.737] RTNETLINK answers: File exists [2025-09-23 17:46:35.795] ubi2:textures is mounted. [2025-09-23 17:46:35.795] ubi1:dml_code is mounted. [2025-09-23 17:46:35.795] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:46:35.795] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:46:35.795] data.LB_FadeInType0=100 [2025-09-23 17:46:35.795] data.CHLH_FadeInType0=0 [2025-09-23 17:46:35.795] data.WU_FadeInDelay=0 [2025-09-23 17:46:35.795] max_time_out=0 [2025-09-23 17:46:35.795] No splash screen [2025-09-23 17:46:35.795] stop dss Done [2025-09-23 17:46:35.795] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:46:35.795] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:46:35.795] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:46:35.862] /dev/mem opened. [2025-09-23 17:46:35.862] Memory mapped at address 0xffff9e842000. [2025-09-23 17:46:35.862] Read at address 0x00600018 (0xffff9e842018): 0x00000000 [2025-09-23 17:46:35.862] Write at address 0x00600018 (0xffff9e842018): 0x00400040, readback 0x00400040 [2025-09-23 17:46:35.862] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:46:35.894] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:46:36.118] Loaded PowerVR consumer services. [2025-09-23 17:46:36.134] Waiting data available... [2025-09-23 17:46:36.150] 512+0 records in [2025-09-23 17:46:36.150] 512+0 records out [2025-09-23 17:46:36.198] Starting syslogd/klogd: done [2025-09-23 17:46:36.214] DML Start [2025-09-23 17:46:36.374] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:46:36.598] DML res1: 0 [2025-09-23 17:46:37.040] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:46:37.040] Read Success [2025-09-23 17:46:37.040] Verifying certificate... [2025-09-23 17:46:37.264] Verified OK [2025-09-23 17:46:37.279] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:46:38.884] Verified OK [2025-09-23 17:46:38.884] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:46:39.505] Verified OK [2025-09-23 17:46:39.505] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:46:42.335] fs.protected_hardlinks = 1 [2025-09-23 17:46:42.335] fs.protected_symlinks = 1 [2025-09-23 17:46:42.351] kernel.modules_disabled = 1 [2025-09-23 17:46:42.543] [2025-09-23 17:46:42.543] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:46:43.683] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:46:51.375] SBL1:1210.0.1.0 [2025-09-23 17:46:51.407] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:46:52.990] SBL2:1210.0.1.0 [2025-09-23 17:46:53.022] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:46:53.134] j-A [2025-09-23 17:47:00.510] The R5 Autosar Classic is running [2025-09-23 17:47:00.510] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:47:00.510] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:47:01.117] INIT: version 2.96 booting [2025-09-23 17:47:01.230] INIT: Entering runlevel: 5 [2025-09-23 17:47:01.389] mtd32 attached [2025-09-23 17:47:01.405] mtd24 attached [2025-09-23 17:47:01.405] mtd28 attached [2025-09-23 17:47:01.437] ubi0:dml_code is mounted. [2025-09-23 17:47:01.453] RTNETLINK answers: File exists [2025-09-23 17:47:01.512] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:47:01.512] ubi1:textures is mounted. [2025-09-23 17:47:01.512] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:47:01.512] ubi2:animations is mounted. [2025-09-23 17:47:01.512] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:47:01.512] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:47:01.512] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:47:01.512] data.LB_FadeInType0=100 [2025-09-23 17:47:01.512] data.CHLH_FadeInType0=0 [2025-09-23 17:47:01.512] data.WU_FadeInDelay=0 [2025-09-23 17:47:01.512] max_time_out=0 [2025-09-23 17:47:01.512] No splash screen [2025-09-23 17:47:01.512] stop dss Done [2025-09-23 17:47:01.603] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:47:01.603] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:47:01.603] /dev/mem opened. [2025-09-23 17:47:01.603] Memory mapped at address 0xffff9544a000. [2025-09-23 17:47:01.603] Read at address 0x00600018 (0xffff9544a018): 0x00000000 [2025-09-23 17:47:01.603] Write at address 0x00600018 (0xffff9544a018): 0x00400040, readback 0x00400040 [2025-09-23 17:47:01.698] Loaded PowerVR consumer services. [2025-09-23 17:47:01.874] Waiting data available... [2025-09-23 17:47:01.890] 512+0 records in [2025-09-23 17:47:01.890] 512+0 records out [2025-09-23 17:47:01.906] Starting syslogd/klogd: done [2025-09-23 17:47:01.938] DML Start [2025-09-23 17:47:02.097] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:47:02.322] DML res1: 0 [2025-09-23 17:47:02.796] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:47:02.796] Read Success [2025-09-23 17:47:02.796] Verifying certificate... [2025-09-23 17:47:03.036] Verified OK [2025-09-23 17:47:03.052] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:47:04.835] Verified OK [2025-09-23 17:47:04.835] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:47:05.442] Verified OK [2025-09-23 17:47:05.458] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:47:08.016] fs.protected_hardlinks = 1 [2025-09-23 17:47:08.048] fs.protected_symlinks = 1 [2025-09-23 17:47:08.048] kernel.modules_disabled = 1 [2025-09-23 17:47:08.223] [2025-09-23 17:47:08.223] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:47:09.355] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:47:17.083] SBL1:1210.0.1.0 [2025-09-23 17:47:17.131] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:47:18.697] SBL2:1210.0.1.0 [2025-09-23 17:47:18.745] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:47:18.857] j-A [2025-09-23 17:47:26.198] The R5 Autosar Classic is running [2025-09-23 17:47:26.229] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:47:26.229] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:47:26.836] INIT: version 2.96 booting [2025-09-23 17:47:26.948] INIT: Entering runlevel: 5 [2025-09-23 17:47:27.092] mtd24 attached [2025-09-23 17:47:27.107] mtd28 attached [2025-09-23 17:47:27.123] mtd32 attached [2025-09-23 17:47:27.232] ubi0:textures is mounted. [2025-09-23 17:47:27.232] ubi1:animations is mounted. [2025-09-23 17:47:27.232] RTNETLINK answers: File exists [2025-09-23 17:47:27.232] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:47:27.232] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:47:27.232] ubi2:dml_code is mounted. [2025-09-23 17:47:27.232] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:47:27.232] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:47:27.232] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:47:27.232] data.LB_FadeInType0=100 [2025-09-23 17:47:27.232] data.CHLH_FadeInType0=0 [2025-09-23 17:47:27.232] data.WU_FadeInDelay=0 [2025-09-23 17:47:27.232] max_time_out=0 [2025-09-23 17:47:27.232] No splash screen [2025-09-23 17:47:27.232] stop dss Done [2025-09-23 17:47:27.271] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:47:27.271] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:47:27.322] /dev/mem opened. [2025-09-23 17:47:27.322] Memory mapped at address 0xffffb3b83000. [2025-09-23 17:47:27.322] Read at address 0x00600018 (0xffffb3b83018): 0x00000000 [2025-09-23 17:47:27.322] Write at address 0x00600018 (0xffffb3b83018): 0x00400040, readback 0x00400040 [2025-09-23 17:47:27.433] Loaded PowerVR consumer services. [2025-09-23 17:47:27.577] Waiting data available... [2025-09-23 17:47:27.577] 512+0 records in [2025-09-23 17:47:27.577] 512+0 records out [2025-09-23 17:47:27.625] Starting syslogd/klogd: done [2025-09-23 17:47:27.641] DML Start [2025-09-23 17:47:27.801] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:47:28.009] DML res1: 0 [2025-09-23 17:47:28.500] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:47:28.500] Read Success [2025-09-23 17:47:28.500] Verifying certificate... [2025-09-23 17:47:28.724] Verified OK [2025-09-23 17:47:28.739] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:47:30.284] Verified OK [2025-09-23 17:47:30.284] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:47:30.939] Verified OK [2025-09-23 17:47:30.939] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:47:33.705] fs.protected_hardlinks = 1 [2025-09-23 17:47:33.721] fs.protected_symlinks = 1 [2025-09-23 17:47:33.721] kernel.modules_disabled = 1 [2025-09-23 17:47:33.929] [2025-09-23 17:47:33.929] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:47:35.121] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:47:42.785] SBL1:1210.0.1.0 [2025-09-23 17:47:42.833] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:47:44.400] SBL2:1210.0.1.0 [2025-09-23 17:47:44.447] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:47:44.559] j-A [2025-09-23 17:47:51.899] The R5 Autosar Classic is running [2025-09-23 17:47:51.930] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:47:51.930] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:47:52.538] INIT: version 2.96 booting [2025-09-23 17:47:52.634] INIT: Entering runlevel: 5 [2025-09-23 17:47:52.794] mtd28 attached [2025-09-23 17:47:52.809] mtd24 attached [2025-09-23 17:47:52.826] mtd32 attached [2025-09-23 17:47:52.874] ubi0:animations is mounted. [2025-09-23 17:47:52.874] RTNETLINK answers: File exists [2025-09-23 17:47:52.931] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:47:52.931] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:47:52.931] ubi1:textures is mounted. [2025-09-23 17:47:52.931] ubi2:dml_code is mounted. [2025-09-23 17:47:52.931] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:47:52.931] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:47:52.931] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:47:52.931] data.LB_FadeInType0=100 [2025-09-23 17:47:52.931] data.CHLH_FadeInType0=0 [2025-09-23 17:47:52.931] data.WU_FadeInDelay=0 [2025-09-23 17:47:52.931] max_time_out=0 [2025-09-23 17:47:52.931] No splash screen [2025-09-23 17:47:52.931] stop dss Done [2025-09-23 17:47:53.007] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:47:53.007] /dev/mem opened. [2025-09-23 17:47:53.007] Memory mapped at address 0xffff9fa3f000. [2025-09-23 17:47:53.007] Read at address 0x00600018 (0xffff9fa3f018): 0x00000000 [2025-09-23 17:47:53.007] Write at address 0x00600018 (0xffff9fa3f018): 0x00400040, readback 0x00400040 [2025-09-23 17:47:53.007] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:47:53.183] Loaded PowerVR consumer services. [2025-09-23 17:47:53.278] Waiting data available... [2025-09-23 17:47:53.310] 512+0 records in [2025-09-23 17:47:53.310] 512+0 records out [2025-09-23 17:47:53.343] Starting syslogd/klogd: done [2025-09-23 17:47:53.359] DML Start [2025-09-23 17:47:53.534] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:47:53.742] DML res1: 0 [2025-09-23 17:47:54.259] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:47:54.259] Read Success [2025-09-23 17:47:54.259] Verifying certificate... [2025-09-23 17:47:54.515] Verified OK [2025-09-23 17:47:54.547] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:47:56.220] Verified OK [2025-09-23 17:47:56.220] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:47:56.796] Verified OK [2025-09-23 17:47:56.796] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:47:59.370] fs.protected_hardlinks = 1 [2025-09-23 17:47:59.370] fs.protected_symlinks = 1 [2025-09-23 17:47:59.370] kernel.modules_disabled = 1 [2025-09-23 17:47:59.545] [2025-09-23 17:47:59.545] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:48:00.797] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:48:08.501] SBL1:1210.0.1.0 [2025-09-23 17:48:08.549] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 17:48:10.116] SBL2:1210.0.1.0 [2025-09-23 17:48:10.164] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:48:10.276] j-A [2025-09-23 17:48:17.615] The R5 Autosar Classic is running [2025-09-23 17:48:17.646] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:48:17.646] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:48:18.254] INIT: version 2.96 booting [2025-09-23 17:48:18.365] INIT: Entering runlevel: 5 [2025-09-23 17:48:18.526] mtd24 attached [2025-09-23 17:48:18.542] mtd32 attached [2025-09-23 17:48:18.542] mtd28 attached [2025-09-23 17:48:18.558] ubi0:textures is mounted. [2025-09-23 17:48:18.590] RTNETLINK answers: File exists [2025-09-23 17:48:18.652] ubi2:animations is mounted. [2025-09-23 17:48:18.652] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:48:18.652] ubi1:dml_code is mounted. [2025-09-23 17:48:18.652] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:48:18.652] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:48:18.652] data.LB_FadeInType0=100 [2025-09-23 17:48:18.652] data.CHLH_FadeInType0=0 [2025-09-23 17:48:18.652] data.WU_FadeInDelay=0 [2025-09-23 17:48:18.652] max_time_out=0 [2025-09-23 17:48:18.652] No splash screen [2025-09-23 17:48:18.652] stop dss Done [2025-09-23 17:48:18.652] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:48:18.652] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:48:18.724] /dev/mem opened. [2025-09-23 17:48:18.724] Memory mapped at address 0xffff92f20000. [2025-09-23 17:48:18.724] Read at address 0x00600018 (0xffff92f20018): 0x00000000 [2025-09-23 17:48:18.724] Write at address 0x00600018 (0xffff92f20018): 0x00400040, readback 0x00400040 [2025-09-23 17:48:18.724] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:48:18.724] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:48:18.851] Loaded PowerVR consumer services. [2025-09-23 17:48:18.980] Waiting data available... [2025-09-23 17:48:18.996] 512+0 records in [2025-09-23 17:48:18.996] 512+0 records out [2025-09-23 17:48:19.044] Starting syslogd/klogd: done [2025-09-23 17:48:19.075] DML Start [2025-09-23 17:48:19.268] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:48:19.476] DML res1: 0 [2025-09-23 17:48:19.867] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:48:19.867] Read Success [2025-09-23 17:48:19.867] Verifying certificate... [2025-09-23 17:48:20.139] Verified OK [2025-09-23 17:48:20.155] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:48:21.722] Verified OK [2025-09-23 17:48:21.722] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:48:22.368] Verified OK [2025-09-23 17:48:22.368] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:48:24.895] fs.protected_hardlinks = 1 [2025-09-23 17:48:24.911] fs.protected_symlinks = 1 [2025-09-23 17:48:24.911] kernel.modules_disabled = 1 [2025-09-23 17:48:25.103] [2025-09-23 17:48:25.103] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:48:26.504] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:48:34.234] SBL1:1210.0.1.0 [2025-09-23 17:48:34.266] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:48:35.849] SBL2:1210.0.1.0 [2025-09-23 17:48:35.881] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 17:48:35.992] j-A [2025-09-23 17:48:43.366] The R5 Autosar Classic is running [2025-09-23 17:48:43.366] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:48:43.366] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:48:43.974] INIT: version 2.96 booting [2025-09-23 17:48:44.085] INIT: Entering runlevel: 5 [2025-09-23 17:48:44.229] mtd28 attached [2025-09-23 17:48:44.245] mtd32 attached [2025-09-23 17:48:44.245] mtd24 attached [2025-09-23 17:48:44.342] RTNETLINK answers: File exists [2025-09-23 17:48:44.342] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:48:44.342] ubi1:dml_code is mounted. [2025-09-23 17:48:44.342] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:48:44.342] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:48:44.342] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:48:44.342] ubi0:animations is mounted. [2025-09-23 17:48:44.342] ubi2:textures is mounted. [2025-09-23 17:48:44.342] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:48:44.358] data.LB_FadeInType0=100 [2025-09-23 17:48:44.358] data.CHLH_FadeInType0=0 [2025-09-23 17:48:44.358] data.WU_FadeInDelay=0 [2025-09-23 17:48:44.379] max_time_out=0 [2025-09-23 17:48:44.379] No splash screen [2025-09-23 17:48:44.379] stop dss Done [2025-09-23 17:48:44.404] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:48:44.404] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:48:44.404] /dev/mem opened. [2025-09-23 17:48:44.404] Memory mapped at address 0xffff96c52000. [2025-09-23 17:48:44.430] Read at address 0x00600018 (0xffff96c52018): 0x00000000 [2025-09-23 17:48:44.430] Write at address 0x00600018 (0xffff96c52018): 0x00400040, readback 0x00400040 [2025-09-23 17:48:44.590] Loaded PowerVR consumer services. [2025-09-23 17:48:44.702] Waiting data available... [2025-09-23 17:48:44.734] 512+0 records in [2025-09-23 17:48:44.734] 512+0 records out [2025-09-23 17:48:44.765] Starting syslogd/klogd: done [2025-09-23 17:48:44.781] DML Start [2025-09-23 17:48:44.957] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:48:45.166] DML res1: 0 [2025-09-23 17:48:45.609] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:48:45.609] Read Success [2025-09-23 17:48:45.609] Verifying certificate... [2025-09-23 17:48:45.849] Verified OK [2025-09-23 17:48:45.865] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:48:47.587] Verified OK [2025-09-23 17:48:47.587] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:48:48.179] Verified OK [2025-09-23 17:48:48.179] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:48:50.738] fs.protected_hardlinks = 1 [2025-09-23 17:48:50.738] fs.protected_symlinks = 1 [2025-09-23 17:48:50.754] kernel.modules_disabled = 1 [2025-09-23 17:48:50.961] [2025-09-23 17:48:50.961] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:48:52.221] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:48:59.923] SBL1:1210.0.1.0 [2025-09-23 17:48:59.971] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:49:01.538] SBL2:1210.0.1.0 [2025-09-23 17:49:01.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:49:01.681] j-A [2025-09-23 17:49:09.037] The R5 Autosar Classic is running [2025-09-23 17:49:09.059] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:49:09.059] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:49:09.666] INIT: version 2.96 booting [2025-09-23 17:49:09.777] INIT: Entering runlevel: 5 [2025-09-23 17:49:09.922] mtd24 attached [2025-09-23 17:49:09.938] mtd28 attached [2025-09-23 17:49:09.954] mtd32 attached [2025-09-23 17:49:10.001] ubi0:textures is mounted. [2025-09-23 17:49:10.001] RTNETLINK answers: File exists [2025-09-23 17:49:10.044] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:49:10.044] ubi1:animations is mounted. [2025-09-23 17:49:10.044] ubi2:dml_code is mounted. [2025-09-23 17:49:10.044] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:49:10.044] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:49:10.044] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:49:10.044] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:49:10.065] data.LB_FadeInType0=100 [2025-09-23 17:49:10.065] data.CHLH_FadeInType0=0 [2025-09-23 17:49:10.065] data.WU_FadeInDelay=0 [2025-09-23 17:49:10.065] max_time_out=0 [2025-09-23 17:49:10.065] No splash screen [2025-09-23 17:49:10.065] stop dss Done [2025-09-23 17:49:10.138] /dev/mem opened. [2025-09-23 17:49:10.138] Memory mapped at address 0xffffad9ec000. [2025-09-23 17:49:10.138] Read at address 0x00600018 (0xffffad9ec018): 0x00000000 [2025-09-23 17:49:10.138] Write at address 0x00600018 (0xffffad9ec018): 0x00400040, readback 0x00400040 [2025-09-23 17:49:10.138] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:49:10.154] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:49:10.251] Loaded PowerVR consumer services. [2025-09-23 17:49:10.411] Waiting data available... [2025-09-23 17:49:10.442] 512+0 records in [2025-09-23 17:49:10.442] 512+0 records out [2025-09-23 17:49:10.474] Starting syslogd/klogd: done [2025-09-23 17:49:10.490] DML Start [2025-09-23 17:49:10.667] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:49:10.890] DML res1: 0 [2025-09-23 17:49:11.306] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:49:11.326] Read Success [2025-09-23 17:49:11.327] Verifying certificate... [2025-09-23 17:49:11.551] Verified OK [2025-09-23 17:49:11.567] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:49:13.224] Verified OK [2025-09-23 17:49:13.224] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:49:13.832] Verified OK [2025-09-23 17:49:13.832] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:49:16.503] fs.protected_hardlinks = 1 [2025-09-23 17:49:16.503] fs.protected_symlinks = 1 [2025-09-23 17:49:16.518] kernel.modules_disabled = 1 [2025-09-23 17:49:16.710] [2025-09-23 17:49:16.710] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:49:17.925] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:49:25.626] SBL1:1210.0.1.0 [2025-09-23 17:49:25.657] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:49:27.240] SBL2:1210.0.1.0 [2025-09-23 17:49:27.288] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:49:27.385] j-A [2025-09-23 17:49:34.739] The R5 Autosar Classic is running [2025-09-23 17:49:34.739] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:49:34.760] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:49:35.368] INIT: version 2.96 booting [2025-09-23 17:49:35.480] INIT: Entering runlevel: 5 [2025-09-23 17:49:35.640] mtd24 attached [2025-09-23 17:49:35.656] mtd28 attached [2025-09-23 17:49:35.656] mtd32 attached [2025-09-23 17:49:35.704] ubi1:animations is mounted. [2025-09-23 17:49:35.704] RTNETLINK answers: File exists [2025-09-23 17:49:35.741] ubi0:textures is mounted. [2025-09-23 17:49:35.741] ubi2:dml_code is mounted. [2025-09-23 17:49:35.741] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:49:35.741] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:49:35.773] data.LB_FadeInType0=100 [2025-09-23 17:49:35.773] data.CHLH_FadeInType0=0 [2025-09-23 17:49:35.773] data.WU_FadeInDelay=0 [2025-09-23 17:49:35.773] max_time_out=0 [2025-09-23 17:49:35.773] No splash screen [2025-09-23 17:49:35.773] stop dss Done [2025-09-23 17:49:35.773] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:49:35.773] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:49:35.773] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:49:35.849] /dev/mem opened. [2025-09-23 17:49:35.849] Memory mapped at address 0xffffb692f000. [2025-09-23 17:49:35.849] Read at address 0x00600018 (0xffffb692f018): 0x00000000 [2025-09-23 17:49:35.849] Write at address 0x00600018 (0xffffb692f018): 0x00400040, readback 0x00400040 [2025-09-23 17:49:35.849] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:49:35.849] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:49:35.961] Loaded PowerVR consumer services. [2025-09-23 17:49:36.120] Waiting data available... [2025-09-23 17:49:36.136] 512+0 records in [2025-09-23 17:49:36.136] 512+0 records out [2025-09-23 17:49:36.201] Starting syslogd/klogd: done [2025-09-23 17:49:36.217] DML Start [2025-09-23 17:49:36.393] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:49:36.600] DML res1: 0 [2025-09-23 17:49:37.016] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:49:37.032] Read Success [2025-09-23 17:49:37.032] Verifying certificate... [2025-09-23 17:49:37.288] Verified OK [2025-09-23 17:49:37.304] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:49:38.885] Verified OK [2025-09-23 17:49:38.885] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:49:39.444] Verified OK [2025-09-23 17:49:39.444] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:49:42.002] fs.protected_hardlinks = 1 [2025-09-23 17:49:42.018] fs.protected_symlinks = 1 [2025-09-23 17:49:42.018] kernel.modules_disabled = 1 [2025-09-23 17:49:42.226] [2025-09-23 17:49:42.226] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:49:43.645] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:49:51.336] SBL1:1210.0.1.0 [2025-09-23 17:49:51.384] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:49:52.950] SBL2:1210.0.1.0 [2025-09-23 17:49:52.998] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:49:53.095] j-A [2025-09-23 17:50:00.449] The R5 Autosar Classic is running [2025-09-23 17:50:00.475] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:50:00.475] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:50:01.082] INIT: version 2.96 booting [2025-09-23 17:50:01.193] INIT: Entering runlevel: 5 [2025-09-23 17:50:01.354] mtd32 attached [2025-09-23 17:50:01.354] mtd28 attached [2025-09-23 17:50:01.370] mtd24 attached [2025-09-23 17:50:01.402] ubi0:dml_code is mounted. [2025-09-23 17:50:01.418] RTNETLINK answers: File exists [2025-09-23 17:50:01.459] ubi2:textures is mounted. [2025-09-23 17:50:01.459] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:50:01.459] ubi1:animations is mounted. [2025-09-23 17:50:01.459] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:50:01.459] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:50:01.459] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:50:01.459] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:50:01.486] data.LB_FadeInType0=100 [2025-09-23 17:50:01.486] data.CHLH_FadeInType0=0 [2025-09-23 17:50:01.486] data.WU_FadeInDelay=0 [2025-09-23 17:50:01.486] max_time_out=0 [2025-09-23 17:50:01.486] No splash screen [2025-09-23 17:50:01.486] stop dss Done [2025-09-23 17:50:01.562] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:50:01.562] /dev/mem opened. [2025-09-23 17:50:01.562] Memory mapped at address 0xffffa1b74000. [2025-09-23 17:50:01.562] Read at address 0x00600018 (0xffffa1b74018): 0x00000000 [2025-09-23 17:50:01.562] Write at address 0x00600018 (0xffffa1b74018): 0x00400040, readback 0x00400040 [2025-09-23 17:50:01.562] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:50:01.787] Loaded PowerVR consumer services. [2025-09-23 17:50:01.802] Waiting data available... [2025-09-23 17:50:01.834] 512+0 records in [2025-09-23 17:50:01.834] 512+0 records out [2025-09-23 17:50:01.882] Starting syslogd/klogd: done [2025-09-23 17:50:01.898] DML Start [2025-09-23 17:50:02.090] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:50:02.314] DML res1: 0 [2025-09-23 17:50:02.751] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:50:02.751] Read Success [2025-09-23 17:50:02.751] Verifying certificate... [2025-09-23 17:50:02.974] Verified OK [2025-09-23 17:50:02.990] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:50:04.615] Verified OK [2025-09-23 17:50:04.615] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:50:05.236] Verified OK [2025-09-23 17:50:05.236] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:50:07.986] fs.protected_hardlinks = 1 [2025-09-23 17:50:08.002] fs.protected_symlinks = 1 [2025-09-23 17:50:08.002] kernel.modules_disabled = 1 [2025-09-23 17:50:08.195] [2025-09-23 17:50:08.195] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:50:09.369] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:50:17.042] SBL1:1210.0.1.0 [2025-09-23 17:50:17.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:50:18.657] SBL2:1210.0.1.0 [2025-09-23 17:50:18.705] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:50:18.817] j-A [2025-09-23 17:50:26.187] The R5 Autosar Classic is running [2025-09-23 17:50:26.187] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:50:26.187] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:50:26.794] INIT: version 2.96 booting [2025-09-23 17:50:26.905] INIT: Entering runlevel: 5 [2025-09-23 17:50:27.049] mtd24 attached [2025-09-23 17:50:27.066] mtd28 attached [2025-09-23 17:50:27.098] mtd32 attached [2025-09-23 17:50:27.114] ubi0:textures is mounted. [2025-09-23 17:50:27.130] ubi1:animations is mounted. [2025-09-23 17:50:27.130] RTNETLINK answers: File exists [2025-09-23 17:50:27.184] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:50:27.184] ubi2:dml_code is mounted. [2025-09-23 17:50:27.184] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:50:27.184] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:50:27.184] data.LB_FadeInType0=100 [2025-09-23 17:50:27.184] data.CHLH_FadeInType0=0 [2025-09-23 17:50:27.184] data.WU_FadeInDelay=0 [2025-09-23 17:50:27.184] max_time_out=0 [2025-09-23 17:50:27.184] No splash screen [2025-09-23 17:50:27.184] stop dss Done [2025-09-23 17:50:27.184] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:50:27.184] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:50:27.258] /dev/mem opened. [2025-09-23 17:50:27.258] Memory mapped at address 0xffff8fd76000. [2025-09-23 17:50:27.258] Read at address 0x00600018 (0xffff8fd76018): 0x00000000 [2025-09-23 17:50:27.258] Write at address 0x00600018 (0xffff8fd76018): 0x00400040, readback 0x00400040 [2025-09-23 17:50:27.289] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:50:27.289] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:50:27.416] Loaded PowerVR consumer services. [2025-09-23 17:50:27.545] Waiting data available... [2025-09-23 17:50:27.561] 512+0 records in [2025-09-23 17:50:27.561] 512+0 records out [2025-09-23 17:50:27.593] Starting syslogd/klogd: done [2025-09-23 17:50:27.609] DML Start [2025-09-23 17:50:27.801] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:50:28.008] DML res1: 0 [2025-09-23 17:50:28.477] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:50:28.477] Read Success [2025-09-23 17:50:28.477] Verifying certificate... [2025-09-23 17:50:28.781] Verified OK [2025-09-23 17:50:28.829] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:50:30.412] Verified OK [2025-09-23 17:50:30.412] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:50:30.995] Verified OK [2025-09-23 17:50:30.995] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:50:33.537] fs.protected_hardlinks = 1 [2025-09-23 17:50:33.552] fs.protected_symlinks = 1 [2025-09-23 17:50:33.553] kernel.modules_disabled = 1 [2025-09-23 17:50:33.744] [2025-09-23 17:50:33.744] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:50:35.079] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:50:42.749] SBL1:1210.0.1.0 [2025-09-23 17:50:42.797] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:50:44.380] SBL2:1210.0.1.0 [2025-09-23 17:50:44.412] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:50:44.523] j-A [2025-09-23 17:50:51.896] The R5 Autosar Classic is running [2025-09-23 17:50:51.896] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:50:51.896] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:50:52.503] INIT: version 2.96 booting [2025-09-23 17:50:52.616] INIT: Entering runlevel: 5 [2025-09-23 17:50:52.775] mtd32 attached [2025-09-23 17:50:52.775] mtd24 attached [2025-09-23 17:50:52.791] mtd28 attached [2025-09-23 17:50:52.840] RTNETLINK answers: File exists [2025-09-23 17:50:52.840] ubi0:dml_code is mounted. [2025-09-23 17:50:52.880] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:50:52.880] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:50:52.880] ubi1:textures is mounted. [2025-09-23 17:50:52.880] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:50:52.880] ubi2:animations is mounted. [2025-09-23 17:50:52.880] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:50:52.880] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:50:52.903] data.LB_FadeInType0=100 [2025-09-23 17:50:52.903] data.CHLH_FadeInType0=0 [2025-09-23 17:50:52.903] data.WU_FadeInDelay=0 [2025-09-23 17:50:52.903] max_time_out=0 [2025-09-23 17:50:52.903] No splash screen [2025-09-23 17:50:52.903] stop dss Done [2025-09-23 17:50:52.919] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:50:52.946] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:50:52.985] /dev/mem opened. [2025-09-23 17:50:52.985] Memory mapped at address 0xffff930c9000. [2025-09-23 17:50:52.985] Read at address 0x00600018 (0xffff930c9018): 0x00000000 [2025-09-23 17:50:52.985] Write at address 0x00600018 (0xffff930c9018): 0x00400040, readback 0x00400040 [2025-09-23 17:50:53.209] Loaded PowerVR consumer services. [2025-09-23 17:50:53.273] Waiting data available... [2025-09-23 17:50:53.289] 512+0 records in [2025-09-23 17:50:53.289] 512+0 records out [2025-09-23 17:50:53.321] Starting syslogd/klogd: done [2025-09-23 17:50:53.337] DML Start [2025-09-23 17:50:53.528] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:50:53.768] DML res1: 0 [2025-09-23 17:50:54.135] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:50:54.135] Read Success [2025-09-23 17:50:54.135] Verifying certificate... [2025-09-23 17:50:54.439] Verified OK [2025-09-23 17:50:54.455] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:50:56.112] Verified OK [2025-09-23 17:50:56.112] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:50:56.710] Verified OK [2025-09-23 17:50:56.710] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:50:59.412] fs.protected_hardlinks = 1 [2025-09-23 17:50:59.412] fs.protected_symlinks = 1 [2025-09-23 17:50:59.428] kernel.modules_disabled = 1 [2025-09-23 17:50:59.620] [2025-09-23 17:50:59.620] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:51:00.816] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:51:08.458] SBL1:1210.0.1.0 [2025-09-23 17:51:08.506] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:51:10.073] SBL2:1210.0.1.0 [2025-09-23 17:51:10.121] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:51:10.217] j-A [2025-09-23 17:51:17.572] The R5 Autosar Classic is running [2025-09-23 17:51:17.593] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:51:17.593] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:51:18.201] INIT: version 2.96 booting [2025-09-23 17:51:18.313] INIT: Entering runlevel: 5 [2025-09-23 17:51:18.473] mtd28 attached [2025-09-23 17:51:18.489] mtd32 attached [2025-09-23 17:51:18.489] mtd24 attached [2025-09-23 17:51:18.537] ubi0:animations is mounted. [2025-09-23 17:51:18.537] RTNETLINK answers: File exists [2025-09-23 17:51:18.578] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:51:18.578] ubi2:textures is mounted. [2025-09-23 17:51:18.578] ubi1:dml_code is mounted. [2025-09-23 17:51:18.578] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:51:18.578] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:51:18.578] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:51:18.578] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:51:18.604] data.LB_FadeInType0=100 [2025-09-23 17:51:18.604] data.CHLH_FadeInType0=0 [2025-09-23 17:51:18.604] data.WU_FadeInDelay=0 [2025-09-23 17:51:18.604] max_time_out=0 [2025-09-23 17:51:18.604] No splash screen [2025-09-23 17:51:18.604] stop dss Done [2025-09-23 17:51:18.636] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:51:18.687] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:51:18.687] /dev/mem opened. [2025-09-23 17:51:18.687] Memory mapped at address 0xffff94761000. [2025-09-23 17:51:18.687] Read at address 0x00600018 (0xffff94761018): 0x00000000 [2025-09-23 17:51:18.687] Write at address 0x00600018 (0xffff94761018): 0x00400040, readback 0x00400040 [2025-09-23 17:51:18.910] Loaded PowerVR consumer services. [2025-09-23 17:51:18.926] Waiting data available... [2025-09-23 17:51:18.958] 512+0 records in [2025-09-23 17:51:18.958] 512+0 records out [2025-09-23 17:51:19.023] Starting syslogd/klogd: done [2025-09-23 17:51:19.039] DML Start [2025-09-23 17:51:19.214] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:51:19.390] DML res1: 0 [2025-09-23 17:51:19.947] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:51:19.947] Read Success [2025-09-23 17:51:19.947] Verifying certificate... [2025-09-23 17:51:20.171] Verified OK [2025-09-23 17:51:20.202] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:51:21.864] Verified OK [2025-09-23 17:51:21.864] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:51:22.457] Verified OK [2025-09-23 17:51:22.457] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:51:24.966] fs.protected_hardlinks = 1 [2025-09-23 17:51:24.966] fs.protected_symlinks = 1 [2025-09-23 17:51:24.982] kernel.modules_disabled = 1 [2025-09-23 17:51:25.174] [2025-09-23 17:51:25.174] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:51:26.476] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:51:34.153] SBL1:1210.0.1.0 [2025-09-23 17:51:34.201] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:51:35.783] SBL2:1210.0.1.0 [2025-09-23 17:51:35.815] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:51:35.928] j-A [2025-09-23 17:51:43.300] The R5 Autosar Classic is running [2025-09-23 17:51:43.300] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:51:43.300] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:51:43.907] INIT: version 2.96 booting [2025-09-23 17:51:44.018] INIT: Entering runlevel: 5 [2025-09-23 17:51:44.178] mtd24 attached [2025-09-23 17:51:44.178] mtd28 attached [2025-09-23 17:51:44.194] mtd32 attached [2025-09-23 17:51:44.210] ubi0:textures is mounted. [2025-09-23 17:51:44.242] RTNETLINK answers: File exists [2025-09-23 17:51:44.242] ubi1:animations is mounted. [2025-09-23 17:51:44.303] ubi2:dml_code is mounted. [2025-09-23 17:51:44.303] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:51:44.303] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:51:44.303] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:51:44.303] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:51:44.303] data.LB_FadeInType0=100 [2025-09-23 17:51:44.303] data.CHLH_FadeInType0=0 [2025-09-23 17:51:44.303] data.WU_FadeInDelay=0 [2025-09-23 17:51:44.303] max_time_out=0 [2025-09-23 17:51:44.303] No splash screen [2025-09-23 17:51:44.303] stop dss Done [2025-09-23 17:51:44.303] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:51:44.347] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:51:44.347] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:51:44.347] /dev/mem opened. [2025-09-23 17:51:44.374] Memory mapped at address 0xffff8820e000. [2025-09-23 17:51:44.374] Read at address 0x00600018 (0xffff8820e018): 0x00000000 [2025-09-23 17:51:44.374] Write at address 0x00600018 (0xffff8820e018): 0x00400040, readback 0x00400040 [2025-09-23 17:51:44.613] Loaded PowerVR consumer services. [2025-09-23 17:51:44.629] Waiting data available... [2025-09-23 17:51:44.661] 512+0 records in [2025-09-23 17:51:44.677] 512+0 records out [2025-09-23 17:51:44.709] Starting syslogd/klogd: done [2025-09-23 17:51:44.725] DML Start [2025-09-23 17:51:44.917] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:51:45.093] DML res1: 0 [2025-09-23 17:51:45.605] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:51:45.621] Read Success [2025-09-23 17:51:45.621] Verifying certificate... [2025-09-23 17:51:45.893] Verified OK [2025-09-23 17:51:45.924] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:51:47.663] Verified OK [2025-09-23 17:51:47.663] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:51:48.254] Verified OK [2025-09-23 17:51:48.254] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:51:50.796] fs.protected_hardlinks = 1 [2025-09-23 17:51:50.812] fs.protected_symlinks = 1 [2025-09-23 17:51:50.812] kernel.modules_disabled = 1 [2025-09-23 17:51:51.004] [2025-09-23 17:51:51.004] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:51:52.132] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:51:59.887] SBL1:1210.0.1.0 [2025-09-23 17:51:59.919] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:52:01.502] SBL2:1210.0.1.0 [2025-09-23 17:52:01.534] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:52:01.646] j-A [2025-09-23 17:52:09.019] The R5 Autosar Classic is running [2025-09-23 17:52:09.019] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:52:09.019] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:52:09.627] INIT: version 2.96 booting [2025-09-23 17:52:09.739] INIT: Entering runlevel: 5 [2025-09-23 17:52:09.898] mtd24 attached [2025-09-23 17:52:09.898] mtd28 attached [2025-09-23 17:52:09.947] mtd32 attached [2025-09-23 17:52:09.947] ubi0:textures is mounted. [2025-09-23 17:52:09.947] ubi1:animations is mounted. [2025-09-23 17:52:10.024] RTNETLINK answers: File exists [2025-09-23 17:52:10.024] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:52:10.024] ubi2:dml_code is mounted. [2025-09-23 17:52:10.024] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:52:10.024] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:52:10.024] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:52:10.024] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:52:10.024] data.LB_FadeInType0=100 [2025-09-23 17:52:10.024] data.CHLH_FadeInType0=0 [2025-09-23 17:52:10.024] data.WU_FadeInDelay=0 [2025-09-23 17:52:10.024] max_time_out=0 [2025-09-23 17:52:10.024] No splash screen [2025-09-23 17:52:10.024] stop dss Done [2025-09-23 17:52:10.072] /dev/mem opened. [2025-09-23 17:52:10.072] Memory mapped at address 0xffff8a093000. [2025-09-23 17:52:10.098] Read at address 0x00600018 (0xffff8a093018): 0x00000000 [2025-09-23 17:52:10.098] Write at address 0x00600018 (0xffff8a093018): 0x00400040, readback 0x00400040 [2025-09-23 17:52:10.098] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:52:10.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:52:10.241] Loaded PowerVR consumer services. [2025-09-23 17:52:10.369] Waiting data available... [2025-09-23 17:52:10.369] 512+0 records in [2025-09-23 17:52:10.369] 512+0 records out [2025-09-23 17:52:10.418] Starting syslogd/klogd: done [2025-09-23 17:52:10.434] DML Start [2025-09-23 17:52:10.609] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:52:10.833] DML res1: 0 [2025-09-23 17:52:11.233] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:52:11.254] Read Success [2025-09-23 17:52:11.254] Verifying certificate... [2025-09-23 17:52:11.494] Verified OK [2025-09-23 17:52:11.509] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:52:13.163] Verified OK [2025-09-23 17:52:13.163] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:52:13.796] Verified OK [2025-09-23 17:52:13.796] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:52:16.338] fs.protected_hardlinks = 1 [2025-09-23 17:52:16.338] fs.protected_symlinks = 1 [2025-09-23 17:52:16.354] kernel.modules_disabled = 1 [2025-09-23 17:52:16.546] [2025-09-23 17:52:16.546] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:52:17.934] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:52:25.574] SBL1:1210.0.1.0 [2025-09-23 17:52:25.623] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:52:27.189] SBL2:1210.0.1.0 [2025-09-23 17:52:27.237] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:52:27.350] j-A [2025-09-23 17:52:34.720] The R5 Autosar Classic is running [2025-09-23 17:52:34.720] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:52:34.720] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:52:35.328] INIT: version 2.96 booting [2025-09-23 17:52:35.440] INIT: Entering runlevel: 5 [2025-09-23 17:52:35.583] mtd24 attached [2025-09-23 17:52:35.599] mtd28 attached [2025-09-23 17:52:35.631] mtd32 attached [2025-09-23 17:52:35.647] ubi1:animations is mounted. [2025-09-23 17:52:35.663] ubi0:textures is mounted. [2025-09-23 17:52:35.663] RTNETLINK answers: File exists [2025-09-23 17:52:35.679] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:52:35.679] ubi2:dml_code is mounted. [2025-09-23 17:52:35.727] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:52:35.727] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:52:35.727] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:52:35.727] data.LB_FadeInType0=100 [2025-09-23 17:52:35.727] data.CHLH_FadeInType0=0 [2025-09-23 17:52:35.727] data.WU_FadeInDelay=0 [2025-09-23 17:52:35.727] max_time_out=0 [2025-09-23 17:52:35.727] No splash screen [2025-09-23 17:52:35.727] stop dss Done [2025-09-23 17:52:35.727] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:52:35.800] /dev/mem opened. [2025-09-23 17:52:35.800] Memory mapped at address 0xffffbdbdd000. [2025-09-23 17:52:35.800] Read at address 0x00600018 (0xffffbdbdd018): 0x00000000 [2025-09-23 17:52:35.800] Write at address 0x00600018 (0xffffbdbdd018): 0x00400040, readback 0x00400040 [2025-09-23 17:52:35.800] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:52:35.823] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:52:35.918] Loaded PowerVR consumer services. [2025-09-23 17:52:36.063] Waiting data available... [2025-09-23 17:52:36.079] 512+0 records in [2025-09-23 17:52:36.079] 512+0 records out [2025-09-23 17:52:36.126] Starting syslogd/klogd: done [2025-09-23 17:52:36.142] DML Start [2025-09-23 17:52:36.334] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:52:36.574] DML res1: 0 [2025-09-23 17:52:36.942] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:52:36.958] Read Success [2025-09-23 17:52:36.958] Verifying certificate... [2025-09-23 17:52:37.246] Verified OK [2025-09-23 17:52:37.262] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:52:38.909] Verified OK [2025-09-23 17:52:38.909] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:52:39.586] Verified OK [2025-09-23 17:52:39.586] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:52:42.144] fs.protected_hardlinks = 1 [2025-09-23 17:52:42.145] fs.protected_symlinks = 1 [2025-09-23 17:52:42.160] kernel.modules_disabled = 1 [2025-09-23 17:52:42.336] [2025-09-23 17:52:42.336] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:52:43.663] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:52:51.277] SBL1:1210.0.1.0 [2025-09-23 17:52:51.325] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:52:52.892] SBL2:1210.0.1.0 [2025-09-23 17:52:52.940] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:52:53.035] j-A [2025-09-23 17:53:00.391] The R5 Autosar Classic is running [2025-09-23 17:53:00.412] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:53:00.412] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:53:01.020] INIT: version 2.96 booting [2025-09-23 17:53:01.131] INIT: Entering runlevel: 5 [2025-09-23 17:53:01.275] mtd24 attached [2025-09-23 17:53:01.291] mtd28 attached [2025-09-23 17:53:01.307] mtd32 attached [2025-09-23 17:53:01.355] RTNETLINK answers: File exists [2025-09-23 17:53:01.398] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:53:01.398] ubi1:animations is mounted. [2025-09-23 17:53:01.398] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:53:01.398] ubi0:textures is mounted. [2025-09-23 17:53:01.398] ubi2:dml_code is mounted. [2025-09-23 17:53:01.398] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:53:01.398] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:53:01.398] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:53:01.423] data.LB_FadeInType0=100 [2025-09-23 17:53:01.423] data.CHLH_FadeInType0=0 [2025-09-23 17:53:01.423] data.WU_FadeInDelay=0 [2025-09-23 17:53:01.423] max_time_out=0 [2025-09-23 17:53:01.423] No splash screen [2025-09-23 17:53:01.423] stop dss Done [2025-09-23 17:53:01.454] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:53:01.470] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:53:01.519] /dev/mem opened. [2025-09-23 17:53:01.519] Memory mapped at address 0xffff9b6f5000. [2025-09-23 17:53:01.519] Read at address 0x00600018 (0xffff9b6f5018): 0x00000000 [2025-09-23 17:53:01.519] Write at address 0x00600018 (0xffff9b6f5018): 0x00400040, readback 0x00400040 [2025-09-23 17:53:01.727] Loaded PowerVR consumer services. [2025-09-23 17:53:01.759] Waiting data available... [2025-09-23 17:53:01.775] 512+0 records in [2025-09-23 17:53:01.775] 512+0 records out [2025-09-23 17:53:01.823] Starting syslogd/klogd: done [2025-09-23 17:53:01.839] DML Start [2025-09-23 17:53:01.998] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:53:02.239] DML res1: 0 [2025-09-23 17:53:02.684] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:53:02.684] Read Success [2025-09-23 17:53:02.684] Verifying certificate... [2025-09-23 17:53:02.955] Verified OK [2025-09-23 17:53:02.971] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:53:04.634] Verified OK [2025-09-23 17:53:04.634] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:53:05.306] Verified OK [2025-09-23 17:53:05.306] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:53:07.879] fs.protected_hardlinks = 1 [2025-09-23 17:53:07.879] fs.protected_symlinks = 1 [2025-09-23 17:53:07.895] kernel.modules_disabled = 1 [2025-09-23 17:53:08.104] [2025-09-23 17:53:08.104] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:53:09.296] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:53:16.987] SBL1:1210.0.1.0 [2025-09-23 17:53:17.035] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:53:18.602] SBL2:1210.0.1.0 [2025-09-23 17:53:18.650] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:53:18.747] j-A [2025-09-23 17:53:26.101] The R5 Autosar Classic is running [2025-09-23 17:53:26.123] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:53:26.123] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:53:26.731] INIT: version 2.96 booting [2025-09-23 17:53:26.844] INIT: Entering runlevel: 5 [2025-09-23 17:53:27.003] mtd32 attached [2025-09-23 17:53:27.003] mtd24 attached [2025-09-23 17:53:27.019] mtd28 attached [2025-09-23 17:53:27.068] RTNETLINK answers: File exists [2025-09-23 17:53:27.111] ubi0:dml_code is mounted. [2025-09-23 17:53:27.111] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:53:27.111] ubi2:animations is mounted. [2025-09-23 17:53:27.111] ubi1:textures is mounted. [2025-09-23 17:53:27.111] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:53:27.111] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:53:27.111] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:53:27.111] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:53:27.111] data.LB_FadeInType0=100 [2025-09-23 17:53:27.111] data.CHLH_FadeInType0=0 [2025-09-23 17:53:27.132] data.WU_FadeInDelay=0 [2025-09-23 17:53:27.132] max_time_out=0 [2025-09-23 17:53:27.132] No splash screen [2025-09-23 17:53:27.132] stop dss Done [2025-09-23 17:53:27.164] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:53:27.204] /dev/mem opened. [2025-09-23 17:53:27.204] Memory mapped at address 0xffff8e9f5000. [2025-09-23 17:53:27.204] Read at address 0x00600018 (0xffff8e9f5018): 0x00000000 [2025-09-23 17:53:27.204] Write at address 0x00600018 (0xffff8e9f5018): 0x00400040, readback 0x00400040 [2025-09-23 17:53:27.204] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:53:27.396] Loaded PowerVR consumer services. [2025-09-23 17:53:27.460] Waiting data available... [2025-09-23 17:53:27.492] 512+0 records in [2025-09-23 17:53:27.492] 512+0 records out [2025-09-23 17:53:27.508] Starting syslogd/klogd: done [2025-09-23 17:53:27.540] DML Start [2025-09-23 17:53:27.732] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:53:27.972] DML res1: 0 [2025-09-23 17:53:28.340] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:53:28.361] Read Success [2025-09-23 17:53:28.361] Verifying certificate... [2025-09-23 17:53:28.585] Verified OK [2025-09-23 17:53:28.601] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:53:30.231] Verified OK [2025-09-23 17:53:30.231] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:53:30.935] Verified OK [2025-09-23 17:53:30.935] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:53:33.568] fs.protected_hardlinks = 1 [2025-09-23 17:53:33.568] fs.protected_symlinks = 1 [2025-09-23 17:53:33.568] kernel.modules_disabled = 1 [2025-09-23 17:53:33.760] [2025-09-23 17:53:33.760] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:53:34.968] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:53:42.701] SBL1:1210.0.1.0 [2025-09-23 17:53:42.733] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:53:44.316] SBL2:1210.0.1.0 [2025-09-23 17:53:44.364] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:53:44.460] j-A [2025-09-23 17:53:51.815] The R5 Autosar Classic is running [2025-09-23 17:53:51.815] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:53:51.836] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:53:52.444] INIT: version 2.96 booting [2025-09-23 17:53:52.556] INIT: Entering runlevel: 5 [2025-09-23 17:53:52.700] mtd28 attached [2025-09-23 17:53:52.716] mtd32 attached [2025-09-23 17:53:52.732] mtd24 attached [2025-09-23 17:53:52.764] ubi0:animations is mounted. [2025-09-23 17:53:52.780] RTNETLINK answers: File exists [2025-09-23 17:53:52.832] ubi1:dml_code is mounted. [2025-09-23 17:53:52.832] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:53:52.832] ubi2:textures is mounted. [2025-09-23 17:53:52.832] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:53:52.832] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:53:52.832] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:53:52.832] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:53:52.832] data.LB_FadeInType0=100 [2025-09-23 17:53:52.832] data.CHLH_FadeInType0=0 [2025-09-23 17:53:52.832] data.WU_FadeInDelay=0 [2025-09-23 17:53:52.832] max_time_out=0 [2025-09-23 17:53:52.832] No splash screen [2025-09-23 17:53:52.832] stop dss Done [2025-09-23 17:53:52.906] /dev/mem opened. [2025-09-23 17:53:52.906] Memory mapped at address 0xffffa5bf1000. [2025-09-23 17:53:52.906] Read at address 0x00600018 (0xffffa5bf1018): 0x00000000 [2025-09-23 17:53:52.906] Write at address 0x00600018 (0xffffa5bf1018): 0x00400040, readback 0x00400040 [2025-09-23 17:53:52.906] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:53:52.922] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:53:53.162] Loaded PowerVR consumer services. [2025-09-23 17:53:53.162] Waiting data available... [2025-09-23 17:53:53.193] 512+0 records in [2025-09-23 17:53:53.193] 512+0 records out [2025-09-23 17:53:53.209] Starting syslogd/klogd: done [2025-09-23 17:53:53.242] DML Start [2025-09-23 17:53:53.386] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:53:53.562] DML res1: 0 [2025-09-23 17:53:54.103] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:53:54.103] Read Success [2025-09-23 17:53:54.103] Verifying certificate... [2025-09-23 17:53:54.342] Verified OK [2025-09-23 17:53:54.358] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:53:56.038] Verified OK [2025-09-23 17:53:56.038] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:53:56.565] Verified OK [2025-09-23 17:53:56.565] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:53:59.028] fs.protected_hardlinks = 1 [2025-09-23 17:53:59.028] fs.protected_symlinks = 1 [2025-09-23 17:53:59.043] kernel.modules_disabled = 1 [2025-09-23 17:53:59.236] [2025-09-23 17:53:59.236] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:54:00.672] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:54:08.433] SBL1:1210.0.1.0 [2025-09-23 17:54:08.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:54:10.047] SBL2:1210.0.1.0 [2025-09-23 17:54:10.095] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:54:10.207] j-A [2025-09-23 17:54:17.579] The R5 Autosar Classic is running [2025-09-23 17:54:17.579] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:54:17.579] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:54:18.186] INIT: version 2.96 booting [2025-09-23 17:54:18.299] INIT: Entering runlevel: 5 [2025-09-23 17:54:18.442] mtd24 attached [2025-09-23 17:54:18.458] mtd28 attached [2025-09-23 17:54:18.474] mtd32 attached [2025-09-23 17:54:18.506] ubi0:textures is mounted. [2025-09-23 17:54:18.522] ubi1:animations is mounted. [2025-09-23 17:54:18.522] RTNETLINK answers: File exists [2025-09-23 17:54:18.582] ubi2:dml_code is mounted. [2025-09-23 17:54:18.582] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:54:18.582] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:54:18.582] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:54:18.582] data.LB_FadeInType0=100 [2025-09-23 17:54:18.582] data.CHLH_FadeInType0=0 [2025-09-23 17:54:18.582] data.WU_FadeInDelay=0 [2025-09-23 17:54:18.582] max_time_out=0 [2025-09-23 17:54:18.582] No splash screen [2025-09-23 17:54:18.582] stop dss Done [2025-09-23 17:54:18.582] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:54:18.582] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:54:18.614] /dev/mem opened. [2025-09-23 17:54:18.614] Memory mapped at address 0xffff83a1f000. [2025-09-23 17:54:18.640] Read at address 0x00600018 (0xffff83a1f018): 0x00000000 [2025-09-23 17:54:18.640] Write at address 0x00600018 (0xffff83a1f018): 0x00400040, readback 0x00400040 [2025-09-23 17:54:18.656] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:54:18.656] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:54:18.815] Loaded PowerVR consumer services. [2025-09-23 17:54:18.928] Waiting data available... [2025-09-23 17:54:18.943] 512+0 records in [2025-09-23 17:54:18.943] 512+0 records out [2025-09-23 17:54:18.991] Starting syslogd/klogd: done [2025-09-23 17:54:19.007] DML Start [2025-09-23 17:54:19.167] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:54:19.439] DML res1: 0 [2025-09-23 17:54:19.807] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:54:19.828] Read Success [2025-09-23 17:54:19.828] Verifying certificate... [2025-09-23 17:54:20.052] Verified OK [2025-09-23 17:54:20.052] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:54:21.707] Verified OK [2025-09-23 17:54:21.707] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:54:22.370] Verified OK [2025-09-23 17:54:22.370] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:54:25.009] fs.protected_hardlinks = 1 [2025-09-23 17:54:25.009] fs.protected_symlinks = 1 [2025-09-23 17:54:25.025] kernel.modules_disabled = 1 [2025-09-23 17:54:25.217] [2025-09-23 17:54:25.217] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:54:26.495] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:54:34.152] SBL1:1210.0.1.0 [2025-09-23 17:54:34.184] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:54:35.767] SBL2:1210.0.1.0 [2025-09-23 17:54:35.798] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:54:35.910] j-A [2025-09-23 17:54:43.285] The R5 Autosar Classic is running [2025-09-23 17:54:43.285] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:54:43.285] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:54:43.892] INIT: version 2.96 booting [2025-09-23 17:54:43.988] INIT: Entering runlevel: 5 [2025-09-23 17:54:44.148] mtd32 attached [2025-09-23 17:54:44.164] mtd24 attached [2025-09-23 17:54:44.164] mtd28 attached [2025-09-23 17:54:44.212] ubi0:dml_code is mounted. [2025-09-23 17:54:44.228] RTNETLINK answers: File exists [2025-09-23 17:54:44.228] ubi1:textures is mounted. [2025-09-23 17:54:44.277] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:54:44.277] ubi2:animations is mounted. [2025-09-23 17:54:44.277] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:54:44.277] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:54:44.277] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:54:44.277] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:54:44.277] data.LB_FadeInType0=100 [2025-09-23 17:54:44.277] data.CHLH_FadeInType0=0 [2025-09-23 17:54:44.277] data.WU_FadeInDelay=0 [2025-09-23 17:54:44.277] max_time_out=0 [2025-09-23 17:54:44.277] No splash screen [2025-09-23 17:54:44.277] stop dss Done [2025-09-23 17:54:44.309] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:54:44.351] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:54:44.351] /dev/mem opened. [2025-09-23 17:54:44.351] Memory mapped at address 0xffff9e815000. [2025-09-23 17:54:44.351] Read at address 0x00600018 (0xffff9e815018): 0x00000000 [2025-09-23 17:54:44.351] Write at address 0x00600018 (0xffff9e815018): 0x00400040, readback 0x00400040 [2025-09-23 17:54:44.430] Loaded PowerVR consumer services. [2025-09-23 17:54:44.622] Waiting data available... [2025-09-23 17:54:44.638] 512+0 records in [2025-09-23 17:54:44.638] 512+0 records out [2025-09-23 17:54:44.687] Starting syslogd/klogd: done [2025-09-23 17:54:44.703] DML Start [2025-09-23 17:54:44.879] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:54:45.134] DML res1: 0 [2025-09-23 17:54:45.485] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:54:45.485] Read Success [2025-09-23 17:54:45.485] Verifying certificate... [2025-09-23 17:54:45.741] Verified OK [2025-09-23 17:54:45.757] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:54:47.453] Verified OK [2025-09-23 17:54:47.453] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:54:48.044] Verified OK [2025-09-23 17:54:48.065] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:54:50.752] fs.protected_hardlinks = 1 [2025-09-23 17:54:50.752] fs.protected_symlinks = 1 [2025-09-23 17:54:50.767] kernel.modules_disabled = 1 [2025-09-23 17:54:50.959] [2025-09-23 17:54:50.959] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:54:52.182] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:54:59.859] SBL1:1210.0.1.0 [2025-09-23 17:54:59.890] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:55:01.474] SBL2:1210.0.1.0 [2025-09-23 17:55:01.506] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:55:01.617] j-A [2025-09-23 17:55:08.972] The R5 Autosar Classic is running [2025-09-23 17:55:08.972] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:55:08.993] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:55:09.600] INIT: version 2.96 booting [2025-09-23 17:55:09.712] INIT: Entering runlevel: 5 [2025-09-23 17:55:09.872] mtd24 attached [2025-09-23 17:55:09.872] mtd28 attached [2025-09-23 17:55:09.888] mtd32 attached [2025-09-23 17:55:09.937] RTNETLINK answers: File exists [2025-09-23 17:55:09.937] ubi0:textures is mounted. [2025-09-23 17:55:10.001] ubi1:animations is mounted. [2025-09-23 17:55:10.001] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:55:10.001] ubi2:dml_code is mounted. [2025-09-23 17:55:10.001] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:55:10.001] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:55:10.001] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:55:10.001] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:55:10.001] data.LB_FadeInType0=100 [2025-09-23 17:55:10.001] data.CHLH_FadeInType0=0 [2025-09-23 17:55:10.001] data.WU_FadeInDelay=0 [2025-09-23 17:55:10.001] max_time_out=0 [2025-09-23 17:55:10.001] No splash screen [2025-09-23 17:55:10.001] stop dss Done [2025-09-23 17:55:10.086] /dev/mem opened. [2025-09-23 17:55:10.086] Memory mapped at address 0xffff9a4f1000. [2025-09-23 17:55:10.086] Read at address 0x00600018 (0xffff9a4f1018): 0x00000000 [2025-09-23 17:55:10.086] Write at address 0x00600018 (0xffff9a4f1018): 0x00400040, readback 0x00400040 [2025-09-23 17:55:10.086] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:55:10.086] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:55:10.277] Loaded PowerVR consumer services. [2025-09-23 17:55:10.341] Waiting data available... [2025-09-23 17:55:10.358] 512+0 records in [2025-09-23 17:55:10.358] 512+0 records out [2025-09-23 17:55:10.405] Starting syslogd/klogd: done [2025-09-23 17:55:10.421] DML Start [2025-09-23 17:55:10.581] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:55:10.805] DML res1: 0 [2025-09-23 17:55:11.261] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:55:11.261] Read Success [2025-09-23 17:55:11.261] Verifying certificate... [2025-09-23 17:55:11.549] Verified OK [2025-09-23 17:55:11.564] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:55:13.116] Verified OK [2025-09-23 17:55:13.137] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:55:13.736] Verified OK [2025-09-23 17:55:13.736] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:55:16.374] fs.protected_hardlinks = 1 [2025-09-23 17:55:16.391] fs.protected_symlinks = 1 [2025-09-23 17:55:16.391] kernel.modules_disabled = 1 [2025-09-23 17:55:16.583] [2025-09-23 17:55:16.583] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:55:17.838] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:55:25.606] SBL1:1210.0.1.0 [2025-09-23 17:55:25.639] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:55:27.221] SBL2:1210.0.1.0 [2025-09-23 17:55:27.253] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:55:27.365] j-A [2025-09-23 17:55:34.738] The R5 Autosar Classic is running [2025-09-23 17:55:34.738] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:55:34.738] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:55:35.346] INIT: version 2.96 booting [2025-09-23 17:55:35.458] INIT: Entering runlevel: 5 [2025-09-23 17:55:35.602] mtd24 attached [2025-09-23 17:55:35.618] mtd28 attached [2025-09-23 17:55:35.618] mtd32 attached [2025-09-23 17:55:35.666] RTNETLINK answers: File exists [2025-09-23 17:55:35.730] ubi1:animations is mounted. [2025-09-23 17:55:35.730] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:55:35.730] ubi0:textures is mounted. [2025-09-23 17:55:35.730] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:55:35.730] ubi2:dml_code is mounted. [2025-09-23 17:55:35.730] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:55:35.730] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:55:35.730] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:55:35.730] data.LB_FadeInType0=100 [2025-09-23 17:55:35.730] data.CHLH_FadeInType0=0 [2025-09-23 17:55:35.730] data.WU_FadeInDelay=0 [2025-09-23 17:55:35.730] max_time_out=0 [2025-09-23 17:55:35.730] No splash screen [2025-09-23 17:55:35.730] stop dss Done [2025-09-23 17:55:35.797] /dev/mem opened. [2025-09-23 17:55:35.797] Memory mapped at address 0xffff86369000. [2025-09-23 17:55:35.797] Read at address 0x00600018 (0xffff86369018): 0x00000000 [2025-09-23 17:55:35.797] Write at address 0x00600018 (0xffff86369018): 0x00400040, readback 0x00400040 [2025-09-23 17:55:35.797] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:55:35.825] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:55:35.968] Loaded PowerVR consumer services. [2025-09-23 17:55:36.081] Waiting data available... [2025-09-23 17:55:36.097] 512+0 records in [2025-09-23 17:55:36.097] 512+0 records out [2025-09-23 17:55:36.128] Starting syslogd/klogd: done [2025-09-23 17:55:36.144] DML Start [2025-09-23 17:55:36.321] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:55:36.560] DML res1: 0 [2025-09-23 17:55:36.973] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:55:36.973] Read Success [2025-09-23 17:55:36.973] Verifying certificate... [2025-09-23 17:55:37.213] Verified OK [2025-09-23 17:55:37.229] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:55:38.859] Verified OK [2025-09-23 17:55:38.859] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:55:39.507] Verified OK [2025-09-23 17:55:39.507] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:55:42.226] fs.protected_hardlinks = 1 [2025-09-23 17:55:42.226] fs.protected_symlinks = 1 [2025-09-23 17:55:42.242] kernel.modules_disabled = 1 [2025-09-23 17:55:42.434] [2025-09-23 17:55:42.434] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:55:43.598] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:55:51.314] SBL1:1210.0.1.0 [2025-09-23 17:55:51.362] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:55:52.928] SBL2:1210.0.1.0 [2025-09-23 17:55:52.976] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 17:55:53.072] j-A [2025-09-23 17:56:00.427] The R5 Autosar Classic is running [2025-09-23 17:56:00.450] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:56:00.450] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:56:01.057] INIT: version 2.96 booting [2025-09-23 17:56:01.169] INIT: Entering runlevel: 5 [2025-09-23 17:56:01.329] mtd28 attached [2025-09-23 17:56:01.329] mtd24 attached [2025-09-23 17:56:01.345] mtd32 attached [2025-09-23 17:56:01.392] RTNETLINK answers: File exists [2025-09-23 17:56:01.468] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:56:01.468] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:56:01.468] ubi0:animations is mounted. [2025-09-23 17:56:01.468] ubi2:dml_code is mounted. [2025-09-23 17:56:01.468] ubi1:textures is mounted. [2025-09-23 17:56:01.468] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:56:01.468] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:56:01.468] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:56:01.468] data.LB_FadeInType0=100 [2025-09-23 17:56:01.468] data.CHLH_FadeInType0=0 [2025-09-23 17:56:01.468] data.WU_FadeInDelay=0 [2025-09-23 17:56:01.468] max_time_out=0 [2025-09-23 17:56:01.468] No splash screen [2025-09-23 17:56:01.468] stop dss Done [2025-09-23 17:56:01.544] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:56:01.544] /dev/mem opened. [2025-09-23 17:56:01.544] Memory mapped at address 0xffffbc5ff000. [2025-09-23 17:56:01.544] Read at address 0x00600018 (0xffffbc5ff018): 0x00000000 [2025-09-23 17:56:01.544] Write at address 0x00600018 (0xffffbc5ff018): 0x00400040, readback 0x00400040 [2025-09-23 17:56:01.544] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:56:01.799] Loaded PowerVR consumer services. [2025-09-23 17:56:01.815] Waiting data available... [2025-09-23 17:56:01.847] 512+0 records in [2025-09-23 17:56:01.847] 512+0 records out [2025-09-23 17:56:01.863] Starting syslogd/klogd: done [2025-09-23 17:56:01.880] DML Start [2025-09-23 17:56:02.039] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:56:02.279] DML res1: 0 [2025-09-23 17:56:02.764] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:56:02.764] Read Success [2025-09-23 17:56:02.764] Verifying certificate... [2025-09-23 17:56:03.020] Verified OK [2025-09-23 17:56:03.036] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:56:04.741] Verified OK [2025-09-23 17:56:04.741] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:56:05.347] Verified OK [2025-09-23 17:56:05.347] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:56:07.873] fs.protected_hardlinks = 1 [2025-09-23 17:56:07.873] fs.protected_symlinks = 1 [2025-09-23 17:56:07.889] kernel.modules_disabled = 1 [2025-09-23 17:56:08.082] [2025-09-23 17:56:08.082] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:56:09.328] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:56:17.045] SBL1:1210.0.1.0 [2025-09-23 17:56:17.077] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:56:18.660] SBL2:1210.0.1.0 [2025-09-23 17:56:18.708] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:56:18.804] j-A [2025-09-23 17:56:26.158] The R5 Autosar Classic is running [2025-09-23 17:56:26.179] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:56:26.179] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:56:26.786] INIT: version 2.96 booting [2025-09-23 17:56:26.898] INIT: Entering runlevel: 5 [2025-09-23 17:56:27.042] mtd28 attached [2025-09-23 17:56:27.058] mtd32 attached [2025-09-23 17:56:27.074] mtd24 attached [2025-09-23 17:56:27.090] ubi0:animations is mounted. [2025-09-23 17:56:27.122] RTNETLINK answers: File exists [2025-09-23 17:56:27.181] ubi1:dml_code is mounted. [2025-09-23 17:56:27.181] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:56:27.181] ubi2:textures is mounted. [2025-09-23 17:56:27.181] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:56:27.181] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:56:27.181] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:56:27.181] data.LB_FadeInType0=100 [2025-09-23 17:56:27.181] data.CHLH_FadeInType0=0 [2025-09-23 17:56:27.181] data.WU_FadeInDelay=0 [2025-09-23 17:56:27.181] max_time_out=0 [2025-09-23 17:56:27.181] No splash screen [2025-09-23 17:56:27.181] stop dss Done [2025-09-23 17:56:27.181] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:56:27.254] /dev/mem opened. [2025-09-23 17:56:27.254] Memory mapped at address 0xffff9d11f000. [2025-09-23 17:56:27.254] Read at address 0x00600018 (0xffff9d11f018): 0x00000000 [2025-09-23 17:56:27.254] Write at address 0x00600018 (0xffff9d11f018): 0x00400040, readback 0x00400040 [2025-09-23 17:56:27.277] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:56:27.277] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:56:27.404] Loaded PowerVR consumer services. [2025-09-23 17:56:27.548] Waiting data available... [2025-09-23 17:56:27.564] 512+0 records in [2025-09-23 17:56:27.564] 512+0 records out [2025-09-23 17:56:27.612] Starting syslogd/klogd: done [2025-09-23 17:56:27.628] DML Start [2025-09-23 17:56:27.804] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:56:27.995] DML res1: 0 [2025-09-23 17:56:28.507] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:56:28.523] Read Success [2025-09-23 17:56:28.523] Verifying certificate... [2025-09-23 17:56:28.827] Verified OK [2025-09-23 17:56:28.843] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:56:30.426] Verified OK [2025-09-23 17:56:30.447] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:56:30.964] Verified OK [2025-09-23 17:56:30.964] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:56:33.587] fs.protected_hardlinks = 1 [2025-09-23 17:56:33.587] fs.protected_symlinks = 1 [2025-09-23 17:56:33.603] kernel.modules_disabled = 1 [2025-09-23 17:56:33.795] [2025-09-23 17:56:33.795] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:56:35.058] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:56:42.759] SBL1:1210.0.1.0 [2025-09-23 17:56:42.807] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:56:44.374] SBL2:1210.0.1.0 [2025-09-23 17:56:44.422] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:56:44.534] j-A [2025-09-23 17:56:51.873] The R5 Autosar Classic is running [2025-09-23 17:56:51.898] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:56:51.898] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:56:52.505] INIT: version 2.96 booting [2025-09-23 17:56:52.617] INIT: Entering runlevel: 5 [2025-09-23 17:56:52.777] mtd28 attached [2025-09-23 17:56:52.777] mtd24 attached [2025-09-23 17:56:52.793] mtd32 attached [2025-09-23 17:56:52.824] ubi0:animations is mounted. [2025-09-23 17:56:52.840] RTNETLINK answers: File exists [2025-09-23 17:56:52.840] ubi1:textures is mounted. [2025-09-23 17:56:52.900] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:56:52.900] ubi2:dml_code is mounted. [2025-09-23 17:56:52.900] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:56:52.900] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:56:52.900] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:56:52.900] data.LB_FadeInType0=100 [2025-09-23 17:56:52.900] data.CHLH_FadeInType0=0 [2025-09-23 17:56:52.900] data.WU_FadeInDelay=0 [2025-09-23 17:56:52.900] max_time_out=0 [2025-09-23 17:56:52.900] No splash screen [2025-09-23 17:56:52.900] stop dss Done [2025-09-23 17:56:52.900] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:56:52.948] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:56:52.948] /dev/mem opened. [2025-09-23 17:56:52.980] Memory mapped at address 0xffffa2f3b000. [2025-09-23 17:56:52.980] Read at address 0x00600018 (0xffffa2f3b018): 0x00000000 [2025-09-23 17:56:52.980] Write at address 0x00600018 (0xffffa2f3b018): 0x00400040, readback 0x00400040 [2025-09-23 17:56:52.980] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:56:53.156] Loaded PowerVR consumer services. [2025-09-23 17:56:53.251] Waiting data available... [2025-09-23 17:56:53.268] 512+0 records in [2025-09-23 17:56:53.268] 512+0 records out [2025-09-23 17:56:53.316] Starting syslogd/klogd: done [2025-09-23 17:56:53.332] DML Start [2025-09-23 17:56:53.491] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:56:53.747] DML res1: 0 [2025-09-23 17:56:54.155] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:56:54.155] Read Success [2025-09-23 17:56:54.155] Verifying certificate... [2025-09-23 17:56:54.395] Verified OK [2025-09-23 17:56:54.411] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:56:56.031] Verified OK [2025-09-23 17:56:56.031] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:56:56.630] Verified OK [2025-09-23 17:56:56.630] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:56:59.171] fs.protected_hardlinks = 1 [2025-09-23 17:56:59.171] fs.protected_symlinks = 1 [2025-09-23 17:56:59.171] kernel.modules_disabled = 1 [2025-09-23 17:56:59.363] [2025-09-23 17:56:59.363] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:57:00.769] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:57:08.470] SBL1:1210.0.1.0 [2025-09-23 17:57:08.518] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:57:10.085] SBL2:1210.0.1.0 [2025-09-23 17:57:10.132] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:57:10.245] j-A [2025-09-23 17:57:17.617] The R5 Autosar Classic is running [2025-09-23 17:57:17.617] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:57:17.617] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:57:18.225] INIT: version 2.96 booting [2025-09-23 17:57:18.336] INIT: Entering runlevel: 5 [2025-09-23 17:57:18.481] mtd28 attached [2025-09-23 17:57:18.497] mtd24 attached [2025-09-23 17:57:18.544] RTNETLINK answers: File exists [2025-09-23 17:57:18.544] ubi0:animations is mounted. [2025-09-23 17:57:18.598] mtd32 attached [2025-09-23 17:57:18.598] ubi1:textures is mounted. [2025-09-23 17:57:18.598] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:57:18.598] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:57:18.598] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:57:18.598] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:57:18.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:57:18.598] ubi2:dml_code is mounted. [2025-09-23 17:57:18.649] data.LB_FadeInType0=100 [2025-09-23 17:57:18.649] data.CHLH_FadeInType0=0 [2025-09-23 17:57:18.649] data.WU_FadeInDelay=0 [2025-09-23 17:57:18.649] max_time_out=0 [2025-09-23 17:57:18.649] No splash screen [2025-09-23 17:57:18.649] stop dss Done [2025-09-23 17:57:18.649] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:57:18.649] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:57:18.699] /dev/mem opened. [2025-09-23 17:57:18.699] Memory mapped at address 0xffffaaca8000. [2025-09-23 17:57:18.699] Read at address 0x00600018 (0xffffaaca8018): 0x00000000 [2025-09-23 17:57:18.699] Write at address 0x00600018 (0xffffaaca8018): 0x00400040, readback 0x00400040 [2025-09-23 17:57:18.795] Loaded PowerVR consumer services. [2025-09-23 17:57:18.971] Waiting data available... [2025-09-23 17:57:18.987] 512+0 records in [2025-09-23 17:57:18.987] 512+0 records out [2025-09-23 17:57:19.019] Starting syslogd/klogd: done [2025-09-23 17:57:19.035] DML Start [2025-09-23 17:57:19.226] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:57:19.418] DML res1: 0 [2025-09-23 17:57:19.858] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:57:19.858] Read Success [2025-09-23 17:57:19.858] Verifying certificate... [2025-09-23 17:57:20.146] Verified OK [2025-09-23 17:57:20.162] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:57:22.031] Verified OK [2025-09-23 17:57:22.031] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:57:22.463] Verified OK [2025-09-23 17:57:22.463] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:57:24.797] fs.protected_hardlinks = 1 [2025-09-23 17:57:24.813] fs.protected_symlinks = 1 [2025-09-23 17:57:24.813] kernel.modules_disabled = 1 [2025-09-23 17:57:25.021] [2025-09-23 17:57:25.021] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:57:26.473] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:57:34.185] SBL1:1210.0.1.0 [2025-09-23 17:57:34.217] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:57:35.800] SBL2:1210.0.1.0 [2025-09-23 17:57:35.832] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:57:35.944] j-A [2025-09-23 17:57:43.317] The R5 Autosar Classic is running [2025-09-23 17:57:43.317] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:57:43.317] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:57:43.924] INIT: version 2.96 booting [2025-09-23 17:57:44.020] INIT: Entering runlevel: 5 [2025-09-23 17:57:44.179] mtd24 attached [2025-09-23 17:57:44.195] mtd28 attached [2025-09-23 17:57:44.211] mtd32 attached [2025-09-23 17:57:44.316] ubi0:textures is mounted. [2025-09-23 17:57:44.316] RTNETLINK answers: File exists [2025-09-23 17:57:44.316] ubi1:animations is mounted. [2025-09-23 17:57:44.316] ubi2:dml_code is mounted. [2025-09-23 17:57:44.316] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:57:44.316] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:57:44.316] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:57:44.316] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:57:44.316] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:57:44.316] data.LB_FadeInType0=100 [2025-09-23 17:57:44.316] data.CHLH_FadeInType0=0 [2025-09-23 17:57:44.316] data.WU_FadeInDelay=0 [2025-09-23 17:57:44.316] max_time_out=0 [2025-09-23 17:57:44.316] No splash screen [2025-09-23 17:57:44.316] stop dss Done [2025-09-23 17:57:44.364] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:57:44.406] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:57:44.406] /dev/mem opened. [2025-09-23 17:57:44.406] Memory mapped at address 0xffff84ff7000. [2025-09-23 17:57:44.406] Read at address 0x00600018 (0xffff84ff7018): 0x00000000 [2025-09-23 17:57:44.406] Write at address 0x00600018 (0xffff84ff7018): 0x00400040, readback 0x00400040 [2025-09-23 17:57:44.613] Loaded PowerVR consumer services. [2025-09-23 17:57:44.645] Waiting data available... [2025-09-23 17:57:44.677] 512+0 records in [2025-09-23 17:57:44.677] 512+0 records out [2025-09-23 17:57:44.725] Starting syslogd/klogd: done [2025-09-23 17:57:44.741] DML Start [2025-09-23 17:57:44.933] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:57:45.157] DML res1: 0 [2025-09-23 17:57:45.557] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:57:45.573] Read Success [2025-09-23 17:57:45.573] Verifying certificate... [2025-09-23 17:57:45.813] Verified OK [2025-09-23 17:57:45.829] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:57:47.440] Verified OK [2025-09-23 17:57:47.440] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:57:48.107] Verified OK [2025-09-23 17:57:48.107] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:57:50.713] fs.protected_hardlinks = 1 [2025-09-23 17:57:50.713] fs.protected_symlinks = 1 [2025-09-23 17:57:50.729] kernel.modules_disabled = 1 [2025-09-23 17:57:50.921] [2025-09-23 17:57:50.921] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:57:52.174] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:57:59.871] SBL1:1210.0.1.0 [2025-09-23 17:57:59.919] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:58:01.501] SBL2:1210.0.1.0 [2025-09-23 17:58:01.533] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:58:01.645] j-A [2025-09-23 17:58:09.018] The R5 Autosar Classic is running [2025-09-23 17:58:09.018] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:58:09.018] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:58:09.625] INIT: version 2.96 booting [2025-09-23 17:58:09.737] INIT: Entering runlevel: 5 [2025-09-23 17:58:09.881] mtd24 attached [2025-09-23 17:58:09.897] mtd28 attached [2025-09-23 17:58:09.912] mtd32 attached [2025-09-23 17:58:10.015] RTNETLINK answers: File exists [2025-09-23 17:58:10.015] ubi0:textures is mounted. [2025-09-23 17:58:10.015] ubi1:animations is mounted. [2025-09-23 17:58:10.015] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:58:10.015] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:58:10.015] ubi2:dml_code is mounted. [2025-09-23 17:58:10.015] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:58:10.015] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:58:10.015] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:58:10.015] data.LB_FadeInType0=100 [2025-09-23 17:58:10.015] data.CHLH_FadeInType0=0 [2025-09-23 17:58:10.015] data.WU_FadeInDelay=0 [2025-09-23 17:58:10.015] max_time_out=0 [2025-09-23 17:58:10.015] No splash screen [2025-09-23 17:58:10.015] stop dss Done [2025-09-23 17:58:10.093] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:58:10.093] /dev/mem opened. [2025-09-23 17:58:10.093] Memory mapped at address 0xffffa59a6000. [2025-09-23 17:58:10.093] Read at address 0x00600018 (0xffffa59a6018): 0x00000000 [2025-09-23 17:58:10.093] Write at address 0x00600018 (0xffffa59a6018): 0x00400040, readback 0x00400040 [2025-09-23 17:58:10.093] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:58:10.253] Loaded PowerVR consumer services. [2025-09-23 17:58:10.350] Waiting data available... [2025-09-23 17:58:10.381] 512+0 records in [2025-09-23 17:58:10.381] 512+0 records out [2025-09-23 17:58:10.429] Starting syslogd/klogd: done [2025-09-23 17:58:10.445] DML Start [2025-09-23 17:58:10.622] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:58:10.861] DML res1: 0 [2025-09-23 17:58:11.309] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:58:11.330] Read Success [2025-09-23 17:58:11.330] Verifying certificate... [2025-09-23 17:58:11.553] Verified OK [2025-09-23 17:58:11.586] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:58:13.383] Verified OK [2025-09-23 17:58:13.383] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:58:13.934] Verified OK [2025-09-23 17:58:13.934] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:58:16.396] fs.protected_hardlinks = 1 [2025-09-23 17:58:16.412] fs.protected_symlinks = 1 [2025-09-23 17:58:16.412] kernel.modules_disabled = 1 [2025-09-23 17:58:16.604] [2025-09-23 17:58:16.604] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:58:17.844] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:58:25.569] SBL1:1210.0.1.0 [2025-09-23 17:58:25.601] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:58:27.184] SBL2:1210.0.1.0 [2025-09-23 17:58:27.232] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:58:27.328] j-A [2025-09-23 17:58:34.684] The R5 Autosar Classic is running [2025-09-23 17:58:34.684] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:58:34.705] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:58:35.312] INIT: version 2.96 booting [2025-09-23 17:58:35.424] INIT: Entering runlevel: 5 [2025-09-23 17:58:35.584] mtd24 attached [2025-09-23 17:58:35.584] mtd28 attached [2025-09-23 17:58:35.600] mtd32 attached [2025-09-23 17:58:35.647] ubi0:textures is mounted. [2025-09-23 17:58:35.714] ubi1:animations is mounted. [2025-09-23 17:58:35.714] RTNETLINK answers: File exists [2025-09-23 17:58:35.714] ubi2:dml_code is mounted. [2025-09-23 17:58:35.714] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:58:35.714] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:58:35.714] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:58:35.714] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:58:35.714] data.LB_FadeInType0=100 [2025-09-23 17:58:35.714] data.CHLH_FadeInType0=0 [2025-09-23 17:58:35.714] data.WU_FadeInDelay=0 [2025-09-23 17:58:35.714] max_time_out=0 [2025-09-23 17:58:35.714] No splash screen [2025-09-23 17:58:35.714] stop dss Done [2025-09-23 17:58:35.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:58:35.785] /dev/mem opened. [2025-09-23 17:58:35.785] Memory mapped at address 0xffffa9cce000. [2025-09-23 17:58:35.785] Read at address 0x00600018 (0xffffa9cce018): 0x00000000 [2025-09-23 17:58:35.785] Write at address 0x00600018 (0xffffa9cce018): 0x00400040, readback 0x00400040 [2025-09-23 17:58:35.785] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:58:35.801] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:58:35.881] Loaded PowerVR consumer services. [2025-09-23 17:58:36.073] Waiting data available... [2025-09-23 17:58:36.089] 512+0 records in [2025-09-23 17:58:36.089] 512+0 records out [2025-09-23 17:58:36.137] Starting syslogd/klogd: done [2025-09-23 17:58:36.153] DML Start [2025-09-23 17:58:36.345] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:58:36.552] DML res1: 0 [2025-09-23 17:58:37.011] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:58:37.011] Read Success [2025-09-23 17:58:37.011] Verifying certificate... [2025-09-23 17:58:37.251] Verified OK [2025-09-23 17:58:37.266] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:58:38.907] Verified OK [2025-09-23 17:58:38.907] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:58:39.511] Verified OK [2025-09-23 17:58:39.511] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:58:42.053] fs.protected_hardlinks = 1 [2025-09-23 17:58:42.053] fs.protected_symlinks = 1 [2025-09-23 17:58:42.069] kernel.modules_disabled = 1 [2025-09-23 17:58:42.278] [2025-09-23 17:58:42.278] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:58:43.617] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:58:51.284] SBL1:1210.0.1.0 [2025-09-23 17:58:51.316] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:58:52.899] SBL2:1210.0.1.0 [2025-09-23 17:58:52.931] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:58:53.043] j-A [2025-09-23 17:59:00.418] The R5 Autosar Classic is running [2025-09-23 17:59:00.418] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:59:00.418] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:59:01.025] INIT: version 2.96 booting [2025-09-23 17:59:01.138] INIT: Entering runlevel: 5 [2025-09-23 17:59:01.281] mtd28 attached [2025-09-23 17:59:01.297] mtd24 attached [2025-09-23 17:59:01.313] mtd32 attached [2025-09-23 17:59:01.361] RTNETLINK answers: File exists [2025-09-23 17:59:01.361] ubi0:animations is mounted. [2025-09-23 17:59:01.406] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:59:01.406] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:59:01.406] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:59:01.406] ubi1:textures is mounted. [2025-09-23 17:59:01.406] ubi2:dml_code is mounted. [2025-09-23 17:59:01.406] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:59:01.406] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:59:01.406] data.LB_FadeInType0=100 [2025-09-23 17:59:01.406] data.CHLH_FadeInType0=0 [2025-09-23 17:59:01.427] data.WU_FadeInDelay=0 [2025-09-23 17:59:01.427] max_time_out=0 [2025-09-23 17:59:01.427] No splash screen [2025-09-23 17:59:01.427] stop dss Done [2025-09-23 17:59:01.514] /dev/mem opened. [2025-09-23 17:59:01.514] Memory mapped at address 0xffffad8ea000. [2025-09-23 17:59:01.514] Read at address 0x00600018 (0xffffad8ea018): 0x00000000 [2025-09-23 17:59:01.514] Write at address 0x00600018 (0xffffad8ea018): 0x00400040, readback 0x00400040 [2025-09-23 17:59:01.514] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:59:01.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:59:01.737] Loaded PowerVR consumer services. [2025-09-23 17:59:01.753] Waiting data available... [2025-09-23 17:59:01.801] 512+0 records in [2025-09-23 17:59:01.801] 512+0 records out [2025-09-23 17:59:01.817] Starting syslogd/klogd: done [2025-09-23 17:59:01.849] DML Start [2025-09-23 17:59:02.041] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:59:02.281] DML res1: 0 [2025-09-23 17:59:02.633] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:59:02.654] Read Success [2025-09-23 17:59:02.654] Verifying certificate... [2025-09-23 17:59:02.894] Verified OK [2025-09-23 17:59:02.910] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:59:04.486] Verified OK [2025-09-23 17:59:04.486] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:59:05.073] Verified OK [2025-09-23 17:59:05.073] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:59:07.838] fs.protected_hardlinks = 1 [2025-09-23 17:59:07.854] fs.protected_symlinks = 1 [2025-09-23 17:59:07.870] kernel.modules_disabled = 1 [2025-09-23 17:59:08.062] [2025-09-23 17:59:08.062] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:59:09.309] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:59:17.006] SBL1:1210.0.1.0 [2025-09-23 17:59:17.054] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:59:18.621] SBL2:1210.0.1.0 [2025-09-23 17:59:18.669] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:59:18.782] j-A [2025-09-23 17:59:26.121] The R5 Autosar Classic is running [2025-09-23 17:59:26.152] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:59:26.152] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:59:26.759] INIT: version 2.96 booting [2025-09-23 17:59:26.871] INIT: Entering runlevel: 5 [2025-09-23 17:59:27.015] mtd24 attached [2025-09-23 17:59:27.031] mtd32 attached [2025-09-23 17:59:27.048] mtd28 attached [2025-09-23 17:59:27.080] ubi0:textures is mounted. [2025-09-23 17:59:27.096] ubi1:dml_code is mounted. [2025-09-23 17:59:27.112] ubi2:animations is mounted. [2025-09-23 17:59:27.112] RTNETLINK answers: File exists [2025-09-23 17:59:27.177] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:59:27.177] data.LB_FadeInType0=100 [2025-09-23 17:59:27.177] data.CHLH_FadeInType0=0 [2025-09-23 17:59:27.177] data.WU_FadeInDelay=0 [2025-09-23 17:59:27.177] max_time_out=0 [2025-09-23 17:59:27.177] No splash screen [2025-09-23 17:59:27.177] stop dss Done [2025-09-23 17:59:27.177] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:59:27.177] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:59:27.177] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:59:27.177] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:59:27.217] /dev/mem opened. [2025-09-23 17:59:27.217] Memory mapped at address 0xffff805a5000. [2025-09-23 17:59:27.217] Read at address 0x00600018 (0xffff805a5018): 0x00000000 [2025-09-23 17:59:27.217] Write at address 0x00600018 (0xffff805a5018): 0x00400040, readback 0x00400040 [2025-09-23 17:59:27.249] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:59:27.272] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:59:27.335] Loaded PowerVR consumer services. [2025-09-23 17:59:27.495] Waiting data available... [2025-09-23 17:59:27.511] 512+0 records in [2025-09-23 17:59:27.511] 512+0 records out [2025-09-23 17:59:27.576] Starting syslogd/klogd: done [2025-09-23 17:59:27.591] DML Start [2025-09-23 17:59:27.767] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:59:27.926] DML res1: 0 [2025-09-23 17:59:28.514] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:59:28.514] Read Success [2025-09-23 17:59:28.514] Verifying certificate... [2025-09-23 17:59:28.786] Verified OK [2025-09-23 17:59:28.818] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:59:30.344] Verified OK [2025-09-23 17:59:30.344] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:59:30.905] Verified OK [2025-09-23 17:59:30.905] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:59:33.703] fs.protected_hardlinks = 1 [2025-09-23 17:59:33.703] fs.protected_symlinks = 1 [2025-09-23 17:59:33.718] kernel.modules_disabled = 1 [2025-09-23 17:59:33.894] [2025-09-23 17:59:33.894] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 17:59:35.012] RTNETLINK answers: Cannot assign requested address [2025-09-23 17:59:42.705] SBL1:1210.0.1.0 [2025-09-23 17:59:42.753] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:59:44.320] SBL2:1210.0.1.0 [2025-09-23 17:59:44.368] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 17:59:44.480] j-A [2025-09-23 17:59:51.819] The R5 Autosar Classic is running [2025-09-23 17:59:51.844] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 17:59:51.844] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 17:59:52.452] INIT: version 2.96 booting [2025-09-23 17:59:52.563] INIT: Entering runlevel: 5 [2025-09-23 17:59:52.724] mtd28 attached [2025-09-23 17:59:52.739] mtd24 attached [2025-09-23 17:59:52.755] mtd32 attached [2025-09-23 17:59:52.787] ubi0:animations is mounted. [2025-09-23 17:59:52.803] ubi1:textures is mounted. [2025-09-23 17:59:52.803] RTNETLINK answers: File exists [2025-09-23 17:59:52.863] ubi2:dml_code is mounted. [2025-09-23 17:59:52.863] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 17:59:52.863] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 17:59:52.863] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 17:59:52.863] data.LB_FadeInType0=100 [2025-09-23 17:59:52.863] data.CHLH_FadeInType0=0 [2025-09-23 17:59:52.863] data.WU_FadeInDelay=0 [2025-09-23 17:59:52.863] max_time_out=0 [2025-09-23 17:59:52.863] No splash screen [2025-09-23 17:59:52.863] stop dss Done [2025-09-23 17:59:52.863] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 17:59:52.863] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 17:59:52.937] /dev/mem opened. [2025-09-23 17:59:52.937] Memory mapped at address 0xffff96f96000. [2025-09-23 17:59:52.937] Read at address 0x00600018 (0xffff96f96018): 0x00000000 [2025-09-23 17:59:52.937] Write at address 0x00600018 (0xffff96f96018): 0x00400040, readback 0x00400040 [2025-09-23 17:59:52.937] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 17:59:52.953] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 17:59:53.192] Loaded PowerVR consumer services. [2025-09-23 17:59:53.240] Waiting data available... [2025-09-23 17:59:53.256] 512+0 records in [2025-09-23 17:59:53.256] 512+0 records out [2025-09-23 17:59:53.288] Starting syslogd/klogd: done [2025-09-23 17:59:53.305] DML Start [2025-09-23 17:59:53.496] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 17:59:53.704] DML res1: 0 [2025-09-23 17:59:54.099] Read DML Algo certificate (mtd31) and save to file [2025-09-23 17:59:54.099] Read Success [2025-09-23 17:59:54.099] Verifying certificate... [2025-09-23 17:59:54.339] Verified OK [2025-09-23 17:59:54.355] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 17:59:56.064] Verified OK [2025-09-23 17:59:56.064] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 17:59:56.638] Verified OK [2025-09-23 17:59:56.638] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 17:59:59.180] fs.protected_hardlinks = 1 [2025-09-23 17:59:59.196] fs.protected_symlinks = 1 [2025-09-23 17:59:59.196] kernel.modules_disabled = 1 [2025-09-23 17:59:59.388] [2025-09-23 17:59:59.388] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:00:00.725] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:00:08.417] SBL1:1210.0.1.0 [2025-09-23 18:00:08.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:00:10.033] SBL2:1210.0.1.0 [2025-09-23 18:00:10.080] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:00:10.192] j-A [2025-09-23 18:00:17.531] The R5 Autosar Classic is running [2025-09-23 18:00:17.556] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:00:17.556] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:00:18.163] INIT: version 2.96 booting [2025-09-23 18:00:18.276] INIT: Entering runlevel: 5 [2025-09-23 18:00:18.420] mtd24 attached [2025-09-23 18:00:18.436] mtd28 attached [2025-09-23 18:00:18.452] mtd32 attached [2025-09-23 18:00:18.500] RTNETLINK answers: File exists [2025-09-23 18:00:18.561] ubi1:animations is mounted. [2025-09-23 18:00:18.561] ubi2:dml_code is mounted. [2025-09-23 18:00:18.561] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:00:18.561] ubi0:textures is mounted. [2025-09-23 18:00:18.561] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:00:18.561] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:00:18.561] data.LB_FadeInType0=100 [2025-09-23 18:00:18.561] data.CHLH_FadeInType0=0 [2025-09-23 18:00:18.561] data.WU_FadeInDelay=0 [2025-09-23 18:00:18.561] max_time_out=0 [2025-09-23 18:00:18.561] No splash screen [2025-09-23 18:00:18.561] stop dss Done [2025-09-23 18:00:18.561] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:00:18.561] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:00:18.627] /dev/mem opened. [2025-09-23 18:00:18.627] Memory mapped at address 0xffff9e22a000. [2025-09-23 18:00:18.627] Read at address 0x00600018 (0xffff9e22a018): 0x00000000 [2025-09-23 18:00:18.627] Write at address 0x00600018 (0xffff9e22a018): 0x00400040, readback 0x00400040 [2025-09-23 18:00:18.627] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:00:18.643] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:00:18.756] Loaded PowerVR consumer services. [2025-09-23 18:00:18.899] Waiting data available... [2025-09-23 18:00:18.915] 512+0 records in [2025-09-23 18:00:18.915] 512+0 records out [2025-09-23 18:00:18.963] Starting syslogd/klogd: done [2025-09-23 18:00:18.979] DML Start [2025-09-23 18:00:19.171] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:00:19.395] DML res1: 0 [2025-09-23 18:00:19.870] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:00:19.870] Read Success [2025-09-23 18:00:19.870] Verifying certificate... [2025-09-23 18:00:20.127] Verified OK [2025-09-23 18:00:20.142] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:00:22.045] Verified OK [2025-09-23 18:00:22.061] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:00:22.517] Verified OK [2025-09-23 18:00:22.517] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:00:24.756] fs.protected_hardlinks = 1 [2025-09-23 18:00:24.772] fs.protected_symlinks = 1 [2025-09-23 18:00:24.772] kernel.modules_disabled = 1 [2025-09-23 18:00:24.979] [2025-09-23 18:00:24.979] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:00:26.445] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:00:34.123] SBL1:1210.0.1.0 [2025-09-23 18:00:34.171] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:00:35.738] SBL2:1210.0.1.0 [2025-09-23 18:00:35.785] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:00:35.897] j-A [2025-09-23 18:00:43.268] The R5 Autosar Classic is running [2025-09-23 18:00:43.268] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:00:43.268] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:00:43.876] INIT: version 2.96 booting [2025-09-23 18:00:43.987] INIT: Entering runlevel: 5 [2025-09-23 18:00:44.147] mtd24 attached [2025-09-23 18:00:44.147] mtd28 attached [2025-09-23 18:00:44.163] mtd32 attached [2025-09-23 18:00:44.196] ubi0:textures is mounted. [2025-09-23 18:00:44.253] RTNETLINK answers: File exists [2025-09-23 18:00:44.253] ubi1:animations is mounted. [2025-09-23 18:00:44.253] ubi2:dml_code is mounted. [2025-09-23 18:00:44.253] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:00:44.253] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:00:44.253] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:00:44.253] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:00:44.282] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:00:44.282] data.LB_FadeInType0=100 [2025-09-23 18:00:44.282] data.CHLH_FadeInType0=0 [2025-09-23 18:00:44.282] data.WU_FadeInDelay=0 [2025-09-23 18:00:44.282] max_time_out=0 [2025-09-23 18:00:44.282] No splash screen [2025-09-23 18:00:44.282] stop dss Done [2025-09-23 18:00:44.352] /dev/mem opened. [2025-09-23 18:00:44.352] Memory mapped at address 0xffff8339e000. [2025-09-23 18:00:44.352] Read at address 0x00600018 (0xffff8339e018): 0x00000000 [2025-09-23 18:00:44.352] Write at address 0x00600018 (0xffff8339e018): 0x00400040, readback 0x00400040 [2025-09-23 18:00:44.384] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:00:44.400] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:00:44.624] Loaded PowerVR consumer services. [2025-09-23 18:00:44.701] Waiting data available... [2025-09-23 18:00:44.701] 512+0 records in [2025-09-23 18:00:44.701] 512+0 records out [2025-09-23 18:00:44.717] Starting syslogd/klogd: done [2025-09-23 18:00:44.733] DML Start [2025-09-23 18:00:44.909] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:00:45.149] DML res1: 0 [2025-09-23 18:00:45.484] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:00:45.505] Read Success [2025-09-23 18:00:45.505] Verifying certificate... [2025-09-23 18:00:45.777] Verified OK [2025-09-23 18:00:45.793] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:00:47.278] Verified OK [2025-09-23 18:00:47.278] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:00:47.853] Verified OK [2025-09-23 18:00:47.853] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:00:50.636] fs.protected_hardlinks = 1 [2025-09-23 18:00:50.651] fs.protected_symlinks = 1 [2025-09-23 18:00:50.651] kernel.modules_disabled = 1 [2025-09-23 18:00:50.844] [2025-09-23 18:00:50.844] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:00:52.230] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:00:59.824] SBL1:1210.0.1.0 [2025-09-23 18:00:59.872] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:01:01.439] SBL2:1210.0.1.0 [2025-09-23 18:01:01.487] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:01:01.583] j-A [2025-09-23 18:01:08.938] The R5 Autosar Classic is running [2025-09-23 18:01:08.963] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:01:08.963] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:01:09.570] INIT: version 2.96 booting [2025-09-23 18:01:09.682] INIT: Entering runlevel: 5 [2025-09-23 18:01:09.842] mtd28 attached [2025-09-23 18:01:09.858] mtd32 attached [2025-09-23 18:01:09.858] mtd24 attached [2025-09-23 18:01:09.906] ubi0:animations is mounted. [2025-09-23 18:01:09.974] RTNETLINK answers: File exists [2025-09-23 18:01:09.974] ubi1:dml_code is mounted. [2025-09-23 18:01:09.974] ubi2:textures is mounted. [2025-09-23 18:01:09.974] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:01:09.974] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:01:09.974] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:01:09.974] data.LB_FadeInType0=100 [2025-09-23 18:01:09.974] data.CHLH_FadeInType0=0 [2025-09-23 18:01:09.974] data.WU_FadeInDelay=0 [2025-09-23 18:01:09.974] max_time_out=0 [2025-09-23 18:01:09.974] No splash screen [2025-09-23 18:01:09.974] stop dss Done [2025-09-23 18:01:09.974] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:01:09.974] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:01:10.040] /dev/mem opened. [2025-09-23 18:01:10.040] Memory mapped at address 0xffffb4a7c000. [2025-09-23 18:01:10.040] Read at address 0x00600018 (0xffffb4a7c018): 0x00000000 [2025-09-23 18:01:10.040] Write at address 0x00600018 (0xffffb4a7c018): 0x00400040, readback 0x00400040 [2025-09-23 18:01:10.114] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:01:10.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:01:10.307] Loaded PowerVR consumer services. [2025-09-23 18:01:10.322] Waiting data available... [2025-09-23 18:01:10.354] 512+0 records in [2025-09-23 18:01:10.354] 512+0 records out [2025-09-23 18:01:10.403] Starting syslogd/klogd: done [2025-09-23 18:01:10.419] DML Start [2025-09-23 18:01:10.594] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:01:10.834] DML res1: 0 [2025-09-23 18:01:11.216] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:01:11.216] Read Success [2025-09-23 18:01:11.216] Verifying certificate... [2025-09-23 18:01:11.488] Verified OK [2025-09-23 18:01:11.504] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:01:13.173] Verified OK [2025-09-23 18:01:13.173] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:01:13.775] Verified OK [2025-09-23 18:01:13.775] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:01:16.302] fs.protected_hardlinks = 1 [2025-09-23 18:01:16.302] fs.protected_symlinks = 1 [2025-09-23 18:01:16.318] kernel.modules_disabled = 1 [2025-09-23 18:01:16.509] [2025-09-23 18:01:16.509] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:01:17.916] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:01:25.554] SBL1:1210.0.1.0 [2025-09-23 18:01:25.586] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:01:27.169] SBL2:1210.0.1.0 [2025-09-23 18:01:27.200] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:01:27.312] j-A [2025-09-23 18:01:34.686] The R5 Autosar Classic is running [2025-09-23 18:01:34.686] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:01:34.686] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:01:35.293] INIT: version 2.96 booting [2025-09-23 18:01:35.406] INIT: Entering runlevel: 5 [2025-09-23 18:01:35.565] mtd32 attached [2025-09-23 18:01:35.565] mtd24 attached [2025-09-23 18:01:35.581] mtd28 attached [2025-09-23 18:01:35.629] RTNETLINK answers: File exists [2025-09-23 18:01:35.629] ubi0:dml_code is mounted. [2025-09-23 18:01:35.689] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:01:35.689] ubi1:textures is mounted. [2025-09-23 18:01:35.689] ubi2:animations is mounted. [2025-09-23 18:01:35.689] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:01:35.689] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:01:35.689] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:01:35.689] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:01:35.689] data.LB_FadeInType0=100 [2025-09-23 18:01:35.689] data.CHLH_FadeInType0=0 [2025-09-23 18:01:35.689] data.WU_FadeInDelay=0 [2025-09-23 18:01:35.689] max_time_out=0 [2025-09-23 18:01:35.689] No splash screen [2025-09-23 18:01:35.689] stop dss Done [2025-09-23 18:01:35.749] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:01:35.750] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:01:35.750] /dev/mem opened. [2025-09-23 18:01:35.750] Memory mapped at address 0xffffa48a2000. [2025-09-23 18:01:35.775] Read at address 0x00600018 (0xffffa48a2018): 0x00000000 [2025-09-23 18:01:35.775] Write at address 0x00600018 (0xffffa48a2018): 0x00400040, readback 0x00400040 [2025-09-23 18:01:35.983] Loaded PowerVR consumer services. [2025-09-23 18:01:36.047] Waiting data available... [2025-09-23 18:01:36.063] 512+0 records in [2025-09-23 18:01:36.063] 512+0 records out [2025-09-23 18:01:36.095] Starting syslogd/klogd: done [2025-09-23 18:01:36.111] DML Start [2025-09-23 18:01:36.303] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:01:36.510] DML res1: 0 [2025-09-23 18:01:36.964] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:01:36.964] Read Success [2025-09-23 18:01:36.964] Verifying certificate... [2025-09-23 18:01:37.172] Verified OK [2025-09-23 18:01:37.188] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:01:38.787] Verified OK [2025-09-23 18:01:38.787] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:01:39.441] Verified OK [2025-09-23 18:01:39.441] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:01:42.127] fs.protected_hardlinks = 1 [2025-09-23 18:01:42.143] fs.protected_symlinks = 1 [2025-09-23 18:01:42.143] kernel.modules_disabled = 1 [2025-09-23 18:01:42.334] [2025-09-23 18:01:42.334] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:01:43.546] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:01:51.272] SBL1:1210.0.1.0 [2025-09-23 18:01:51.304] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:01:52.887] SBL2:1210.0.1.0 [2025-09-23 18:01:52.919] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:01:53.030] j-A [2025-09-23 18:02:00.406] The R5 Autosar Classic is running [2025-09-23 18:02:00.406] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:02:00.406] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:02:01.014] INIT: version 2.96 booting [2025-09-23 18:02:01.125] INIT: Entering runlevel: 5 [2025-09-23 18:02:01.270] mtd24 attached [2025-09-23 18:02:01.286] mtd28 attached [2025-09-23 18:02:01.302] mtd32 attached [2025-09-23 18:02:01.318] ubi0:textures is mounted. [2025-09-23 18:02:01.350] RTNETLINK answers: File exists [2025-09-23 18:02:01.350] ubi1:animations is mounted. [2025-09-23 18:02:01.404] ubi2:dml_code is mounted. [2025-09-23 18:02:01.404] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:02:01.404] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:02:01.404] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:02:01.404] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:02:01.404] data.LB_FadeInType0=100 [2025-09-23 18:02:01.404] data.CHLH_FadeInType0=0 [2025-09-23 18:02:01.404] data.WU_FadeInDelay=0 [2025-09-23 18:02:01.404] max_time_out=0 [2025-09-23 18:02:01.404] No splash screen [2025-09-23 18:02:01.404] stop dss Done [2025-09-23 18:02:01.404] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:02:01.479] /dev/mem opened. [2025-09-23 18:02:01.479] Memory mapped at address 0xffff99588000. [2025-09-23 18:02:01.479] Read at address 0x00600018 (0xffff99588018): 0x00000000 [2025-09-23 18:02:01.479] Write at address 0x00600018 (0xffff99588018): 0x00400040, readback 0x00400040 [2025-09-23 18:02:01.479] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:02:01.479] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:02:01.559] Loaded PowerVR consumer services. [2025-09-23 18:02:01.735] Waiting data available... [2025-09-23 18:02:01.767] 512+0 records in [2025-09-23 18:02:01.767] 512+0 records out [2025-09-23 18:02:01.799] Starting syslogd/klogd: done [2025-09-23 18:02:01.815] DML Start [2025-09-23 18:02:01.975] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:02:02.167] DML res1: 0 [2025-09-23 18:02:02.677] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:02:02.677] Read Success [2025-09-23 18:02:02.677] Verifying certificate... [2025-09-23 18:02:02.901] Verified OK [2025-09-23 18:02:02.917] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:02:04.649] Verified OK [2025-09-23 18:02:04.649] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:02:05.250] Verified OK [2025-09-23 18:02:05.250] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:02:07.872] fs.protected_hardlinks = 1 [2025-09-23 18:02:07.888] fs.protected_symlinks = 1 [2025-09-23 18:02:07.904] kernel.modules_disabled = 1 [2025-09-23 18:02:08.096] [2025-09-23 18:02:08.096] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:02:09.223] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:02:16.988] SBL1:1210.0.1.0 [2025-09-23 18:02:17.036] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:02:18.602] SBL2:1210.0.1.0 [2025-09-23 18:02:18.650] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:02:18.746] j-A [2025-09-23 18:02:26.101] The R5 Autosar Classic is running [2025-09-23 18:02:26.125] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:02:26.125] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:02:26.733] INIT: version 2.96 booting [2025-09-23 18:02:26.844] INIT: Entering runlevel: 5 [2025-09-23 18:02:27.004] mtd28 attached [2025-09-23 18:02:27.004] mtd24 attached [2025-09-23 18:02:27.037] ubi0:animations is mounted. [2025-09-23 18:02:27.053] mtd32 attached [2025-09-23 18:02:27.053] ubi1:textures is mounted. [2025-09-23 18:02:27.085] RTNETLINK answers: File exists [2025-09-23 18:02:27.085] ubi2:dml_code is mounted. [2025-09-23 18:02:27.106] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:02:27.106] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:02:27.106] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:02:27.142] data.LB_FadeInType0=100 [2025-09-23 18:02:27.142] data.CHLH_FadeInType0=0 [2025-09-23 18:02:27.142] data.WU_FadeInDelay=0 [2025-09-23 18:02:27.142] max_time_out=0 [2025-09-23 18:02:27.142] No splash screen [2025-09-23 18:02:27.142] stop dss Done [2025-09-23 18:02:27.142] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:02:27.142] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:02:27.213] /dev/mem opened. [2025-09-23 18:02:27.213] Memory mapped at address 0xffffa197e000. [2025-09-23 18:02:27.213] Read at address 0x00600018 (0xffffa197e018): 0x00000000 [2025-09-23 18:02:27.213] Write at address 0x00600018 (0xffffa197e018): 0x00400040, readback 0x00400040 [2025-09-23 18:02:27.213] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:02:27.229] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:02:27.277] Loaded PowerVR consumer services. [2025-09-23 18:02:27.470] Waiting data available... [2025-09-23 18:02:27.501] 512+0 records in [2025-09-23 18:02:27.501] 512+0 records out [2025-09-23 18:02:27.549] Starting syslogd/klogd: done [2025-09-23 18:02:27.565] DML Start [2025-09-23 18:02:27.740] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:02:27.996] DML res1: 0 [2025-09-23 18:02:28.385] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:02:28.385] Read Success [2025-09-23 18:02:28.385] Verifying certificate... [2025-09-23 18:02:28.641] Verified OK [2025-09-23 18:02:28.657] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:02:30.325] Verified OK [2025-09-23 18:02:30.325] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:02:30.884] Verified OK [2025-09-23 18:02:30.884] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:02:33.491] fs.protected_hardlinks = 1 [2025-09-23 18:02:33.507] fs.protected_symlinks = 1 [2025-09-23 18:02:33.507] kernel.modules_disabled = 1 [2025-09-23 18:02:33.698] [2025-09-23 18:02:33.698] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:02:35.093] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:02:42.696] SBL1:1210.0.1.0 [2025-09-23 18:02:42.744] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:02:44.311] SBL2:1210.0.1.0 [2025-09-23 18:02:44.358] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:02:44.455] j-A [2025-09-23 18:02:51.810] The R5 Autosar Classic is running [2025-09-23 18:02:51.834] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:02:51.834] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:02:52.442] INIT: version 2.96 booting [2025-09-23 18:02:52.553] INIT: Entering runlevel: 5 [2025-09-23 18:02:52.714] mtd24 attached [2025-09-23 18:02:52.714] mtd28 attached [2025-09-23 18:02:52.730] mtd32 attached [2025-09-23 18:02:52.778] ubi0:textures is mounted. [2025-09-23 18:02:52.778] RTNETLINK answers: File exists [2025-09-23 18:02:52.837] ubi2:dml_code is mounted. [2025-09-23 18:02:52.837] ubi1:animations is mounted. [2025-09-23 18:02:52.837] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:02:52.837] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:02:52.837] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:02:52.837] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:02:52.837] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:02:52.837] data.LB_FadeInType0=100 [2025-09-23 18:02:52.837] data.CHLH_FadeInType0=0 [2025-09-23 18:02:52.837] data.WU_FadeInDelay=0 [2025-09-23 18:02:52.837] max_time_out=0 [2025-09-23 18:02:52.837] No splash screen [2025-09-23 18:02:52.837] stop dss Done [2025-09-23 18:02:52.903] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:02:52.903] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:02:52.903] /dev/mem opened. [2025-09-23 18:02:52.903] Memory mapped at address 0xffffa6b24000. [2025-09-23 18:02:52.903] Read at address 0x00600018 (0xffffa6b24018): 0x00000000 [2025-09-23 18:02:52.903] Write at address 0x00600018 (0xffffa6b24018): 0x00400040, readback 0x00400040 [2025-09-23 18:02:53.015] Loaded PowerVR consumer services. [2025-09-23 18:02:53.174] Waiting data available... [2025-09-23 18:02:53.206] 512+0 records in [2025-09-23 18:02:53.206] 512+0 records out [2025-09-23 18:02:53.254] Starting syslogd/klogd: done [2025-09-23 18:02:53.270] DML Start [2025-09-23 18:02:53.446] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:02:53.686] DML res1: 0 [2025-09-23 18:02:54.115] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:02:54.116] Read Success [2025-09-23 18:02:54.116] Verifying certificate... [2025-09-23 18:02:54.355] Verified OK [2025-09-23 18:02:54.387] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:02:55.971] Verified OK [2025-09-23 18:02:55.971] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:02:56.618] Verified OK [2025-09-23 18:02:56.618] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:02:59.209] fs.protected_hardlinks = 1 [2025-09-23 18:02:59.209] fs.protected_symlinks = 1 [2025-09-23 18:02:59.224] kernel.modules_disabled = 1 [2025-09-23 18:02:59.400] [2025-09-23 18:02:59.400] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:03:00.723] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:03:08.416] SBL1:1210.0.1.0 [2025-09-23 18:03:08.448] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:03:10.031] SBL2:1210.0.1.0 [2025-09-23 18:03:10.063] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:03:10.175] j-A [2025-09-23 18:03:17.549] The R5 Autosar Classic is running [2025-09-23 18:03:17.549] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:03:17.549] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:03:18.156] INIT: version 2.96 booting [2025-09-23 18:03:18.269] INIT: Entering runlevel: 5 [2025-09-23 18:03:18.428] mtd24 attached [2025-09-23 18:03:18.444] mtd32 attached [2025-09-23 18:03:18.444] mtd28 attached [2025-09-23 18:03:18.476] ubi0:textures is mounted. [2025-09-23 18:03:18.492] RTNETLINK answers: File exists [2025-09-23 18:03:18.533] ubi1:dml_code is mounted. [2025-09-23 18:03:18.533] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:03:18.533] ubi2:animations is mounted. [2025-09-23 18:03:18.533] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:03:18.533] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:03:18.533] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:03:18.533] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:03:18.553] data.LB_FadeInType0=100 [2025-09-23 18:03:18.553] data.CHLH_FadeInType0=0 [2025-09-23 18:03:18.553] data.WU_FadeInDelay=0 [2025-09-23 18:03:18.553] max_time_out=0 [2025-09-23 18:03:18.553] No splash screen [2025-09-23 18:03:18.553] stop dss Done [2025-09-23 18:03:18.635] /dev/mem opened. [2025-09-23 18:03:18.635] Memory mapped at address 0xffffa30dd000. [2025-09-23 18:03:18.635] Read at address 0x00600018 (0xffffa30dd018): 0x00000000 [2025-09-23 18:03:18.635] Write at address 0x00600018 (0xffffa30dd018): 0x00400040, readback 0x00400040 [2025-09-23 18:03:18.635] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:03:18.651] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:03:18.763] Loaded PowerVR consumer services. [2025-09-23 18:03:18.906] Waiting data available... [2025-09-23 18:03:18.906] 512+0 records in [2025-09-23 18:03:18.922] 512+0 records out [2025-09-23 18:03:18.954] Starting syslogd/klogd: done [2025-09-23 18:03:18.970] DML Start [2025-09-23 18:03:19.130] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:03:19.371] DML res1: 0 [2025-09-23 18:03:19.802] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:03:19.823] Read Success [2025-09-23 18:03:19.823] Verifying certificate... [2025-09-23 18:03:20.063] Verified OK [2025-09-23 18:03:20.079] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:03:21.944] Verified OK [2025-09-23 18:03:21.944] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:03:22.456] Verified OK [2025-09-23 18:03:22.456] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:03:24.903] fs.protected_hardlinks = 1 [2025-09-23 18:03:24.903] fs.protected_symlinks = 1 [2025-09-23 18:03:24.919] kernel.modules_disabled = 1 [2025-09-23 18:03:25.110] [2025-09-23 18:03:25.110] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:03:26.386] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:03:34.120] SBL1:1210.0.1.0 [2025-09-23 18:03:34.152] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:03:35.734] SBL2:1210.0.1.0 [2025-09-23 18:03:35.766] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:03:35.878] j-A [2025-09-23 18:03:43.254] The R5 Autosar Classic is running [2025-09-23 18:03:43.254] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:03:43.254] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:03:43.861] INIT: version 2.96 booting [2025-09-23 18:03:43.972] INIT: Entering runlevel: 5 [2025-09-23 18:03:44.132] mtd28 attached [2025-09-23 18:03:44.132] mtd24 attached [2025-09-23 18:03:44.149] mtd32 attached [2025-09-23 18:03:44.197] ubi0:animations is mounted. [2025-09-23 18:03:44.197] ubi1:textures is mounted. [2025-09-23 18:03:44.223] RTNETLINK answers: File exists [2025-09-23 18:03:44.223] ubi2:dml_code is mounted. [2025-09-23 18:03:44.223] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:03:44.261] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:03:44.261] data.LB_FadeInType0=100 [2025-09-23 18:03:44.261] data.CHLH_FadeInType0=0 [2025-09-23 18:03:44.261] data.WU_FadeInDelay=0 [2025-09-23 18:03:44.261] max_time_out=0 [2025-09-23 18:03:44.261] No splash screen [2025-09-23 18:03:44.261] stop dss Done [2025-09-23 18:03:44.261] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:03:44.261] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:03:44.276] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:03:44.332] /dev/mem opened. [2025-09-23 18:03:44.332] Memory mapped at address 0xffff8b226000. [2025-09-23 18:03:44.332] Read at address 0x00600018 (0xffff8b226018): 0x00000000 [2025-09-23 18:03:44.332] Write at address 0x00600018 (0xffff8b226018): 0x00400040, readback 0x00400040 [2025-09-23 18:03:44.396] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:03:44.412] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:03:44.475] Loaded PowerVR consumer services. [2025-09-23 18:03:44.603] Waiting data available... [2025-09-23 18:03:44.619] 512+0 records in [2025-09-23 18:03:44.619] 512+0 records out [2025-09-23 18:03:44.651] Starting syslogd/klogd: done [2025-09-23 18:03:44.667] DML Start [2025-09-23 18:03:44.859] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:03:45.019] DML res1: 0 [2025-09-23 18:03:45.505] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:03:45.505] Read Success [2025-09-23 18:03:45.505] Verifying certificate... [2025-09-23 18:03:45.744] Verified OK [2025-09-23 18:03:45.760] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:03:47.535] Verified OK [2025-09-23 18:03:47.535] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:03:48.062] Verified OK [2025-09-23 18:03:48.062] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:03:50.541] fs.protected_hardlinks = 1 [2025-09-23 18:03:50.541] fs.protected_symlinks = 1 [2025-09-23 18:03:50.557] kernel.modules_disabled = 1 [2025-09-23 18:03:50.765] [2025-09-23 18:03:50.765] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:03:52.087] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:03:59.816] SBL1:1210.0.1.0 [2025-09-23 18:03:59.864] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:04:01.431] SBL2:1210.0.1.0 [2025-09-23 18:04:01.478] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:04:01.574] j-A [2025-09-23 18:04:08.930] The R5 Autosar Classic is running [2025-09-23 18:04:08.953] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:04:08.953] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:04:09.561] INIT: version 2.96 booting [2025-09-23 18:04:09.673] INIT: Entering runlevel: 5 [2025-09-23 18:04:09.817] mtd24 attached [2025-09-23 18:04:09.833] mtd32 attached [2025-09-23 18:04:09.848] mtd28 attached [2025-09-23 18:04:09.932] RTNETLINK answers: File exists [2025-09-23 18:04:09.932] ubi0:textures is mounted. [2025-09-23 18:04:09.932] ubi2:animations is mounted. [2025-09-23 18:04:09.932] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:04:09.932] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:04:09.932] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:04:09.932] ubi1:dml_code is mounted. [2025-09-23 18:04:09.932] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:04:09.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:04:09.958] data.LB_FadeInType0=100 [2025-09-23 18:04:09.958] data.CHLH_FadeInType0=0 [2025-09-23 18:04:09.958] data.WU_FadeInDelay=0 [2025-09-23 18:04:09.958] max_time_out=0 [2025-09-23 18:04:09.958] No splash screen [2025-09-23 18:04:09.958] stop dss Done [2025-09-23 18:04:09.974] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:04:10.005] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:04:10.042] /dev/mem opened. [2025-09-23 18:04:10.042] Memory mapped at address 0xffff80557000. [2025-09-23 18:04:10.042] Read at address 0x00600018 (0xffff80557018): 0x00000000 [2025-09-23 18:04:10.042] Write at address 0x00600018 (0xffff80557018): 0x00400040, readback 0x00400040 [2025-09-23 18:04:10.121] Loaded PowerVR consumer services. [2025-09-23 18:04:10.313] Waiting data available... [2025-09-23 18:04:10.313] 512+0 records in [2025-09-23 18:04:10.313] 512+0 records out [2025-09-23 18:04:10.345] Starting syslogd/klogd: done [2025-09-23 18:04:10.361] DML Start [2025-09-23 18:04:10.505] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:04:10.761] DML res1: 0 [2025-09-23 18:04:11.193] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:04:11.209] Read Success [2025-09-23 18:04:11.209] Verifying certificate... [2025-09-23 18:04:11.449] Verified OK [2025-09-23 18:04:11.465] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:04:13.110] Verified OK [2025-09-23 18:04:13.110] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:04:13.699] Verified OK [2025-09-23 18:04:13.699] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:04:16.209] fs.protected_hardlinks = 1 [2025-09-23 18:04:16.225] fs.protected_symlinks = 1 [2025-09-23 18:04:16.225] kernel.modules_disabled = 1 [2025-09-23 18:04:16.417] [2025-09-23 18:04:16.417] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:04:17.821] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:04:25.538] SBL1:1210.0.1.0 [2025-09-23 18:04:25.586] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:04:27.152] SBL2:1210.0.1.0 [2025-09-23 18:04:27.200] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:04:27.313] j-A [2025-09-23 18:04:34.652] The R5 Autosar Classic is running [2025-09-23 18:04:34.677] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:04:34.677] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:04:35.285] INIT: version 2.96 booting [2025-09-23 18:04:35.396] INIT: Entering runlevel: 5 [2025-09-23 18:04:35.557] mtd24 attached [2025-09-23 18:04:35.557] mtd28 attached [2025-09-23 18:04:35.589] mtd32 attached [2025-09-23 18:04:35.621] ubi0:textures is mounted. [2025-09-23 18:04:35.637] RTNETLINK answers: File exists [2025-09-23 18:04:35.637] ubi1:animations is mounted. [2025-09-23 18:04:35.687] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:04:35.687] ubi2:dml_code is mounted. [2025-09-23 18:04:35.687] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:04:35.687] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:04:35.687] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:04:35.687] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:04:35.687] data.LB_FadeInType0=100 [2025-09-23 18:04:35.687] data.CHLH_FadeInType0=0 [2025-09-23 18:04:35.687] data.WU_FadeInDelay=0 [2025-09-23 18:04:35.687] max_time_out=0 [2025-09-23 18:04:35.687] No splash screen [2025-09-23 18:04:35.687] stop dss Done [2025-09-23 18:04:35.718] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:04:35.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:04:35.753] /dev/mem opened. [2025-09-23 18:04:35.753] Memory mapped at address 0xffff861d2000. [2025-09-23 18:04:35.753] Read at address 0x00600018 (0xffff861d2018): 0x00000000 [2025-09-23 18:04:35.753] Write at address 0x00600018 (0xffff861d2018): 0x00400040, readback 0x00400040 [2025-09-23 18:04:36.025] Loaded PowerVR consumer services. [2025-09-23 18:04:36.025] Waiting data available... [2025-09-23 18:04:36.073] 512+0 records in [2025-09-23 18:04:36.073] 512+0 records out [2025-09-23 18:04:36.089] Starting syslogd/klogd: done [2025-09-23 18:04:36.121] DML Start [2025-09-23 18:04:36.265] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:04:36.473] DML res1: 0 [2025-09-23 18:04:36.969] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:04:36.989] Read Success [2025-09-23 18:04:36.989] Verifying certificate... [2025-09-23 18:04:37.213] Verified OK [2025-09-23 18:04:37.245] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:04:38.876] Verified OK [2025-09-23 18:04:38.898] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:04:39.458] Verified OK [2025-09-23 18:04:39.458] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:04:42.031] fs.protected_hardlinks = 1 [2025-09-23 18:04:42.031] fs.protected_symlinks = 1 [2025-09-23 18:04:42.047] kernel.modules_disabled = 1 [2025-09-23 18:04:42.240] [2025-09-23 18:04:42.240] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:04:43.549] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:04:51.241] SBL1:1210.0.1.0 [2025-09-23 18:04:51.289] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:04:52.856] SBL2:1210.0.1.0 [2025-09-23 18:04:52.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:04:53.015] j-A [2025-09-23 18:05:00.355] The R5 Autosar Classic is running [2025-09-23 18:05:00.380] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:05:00.380] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:05:00.988] INIT: version 2.96 booting [2025-09-23 18:05:01.099] INIT: Entering runlevel: 5 [2025-09-23 18:05:01.259] mtd32 attached [2025-09-23 18:05:01.259] mtd28 attached [2025-09-23 18:05:01.275] mtd24 attached [2025-09-23 18:05:01.307] ubi0:dml_code is mounted. [2025-09-23 18:05:01.324] ubi1:animations is mounted. [2025-09-23 18:05:01.324] RTNETLINK answers: File exists [2025-09-23 18:05:01.385] ubi2:textures is mounted. [2025-09-23 18:05:01.385] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:05:01.385] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:05:01.385] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:05:01.385] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:05:01.385] data.LB_FadeInType0=100 [2025-09-23 18:05:01.385] data.CHLH_FadeInType0=0 [2025-09-23 18:05:01.385] data.WU_FadeInDelay=0 [2025-09-23 18:05:01.385] max_time_out=0 [2025-09-23 18:05:01.385] No splash screen [2025-09-23 18:05:01.385] stop dss Done [2025-09-23 18:05:01.385] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:05:01.451] /dev/mem opened. [2025-09-23 18:05:01.451] Memory mapped at address 0xffffb10df000. [2025-09-23 18:05:01.451] Read at address 0x00600018 (0xffffb10df018): 0x00000000 [2025-09-23 18:05:01.451] Write at address 0x00600018 (0xffffb10df018): 0x00400040, readback 0x00400040 [2025-09-23 18:05:01.483] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:05:01.515] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:05:01.753] Loaded PowerVR consumer services. [2025-09-23 18:05:01.753] Waiting data available... [2025-09-23 18:05:01.769] 512+0 records in [2025-09-23 18:05:01.769] 512+0 records out [2025-09-23 18:05:01.801] Starting syslogd/klogd: done [2025-09-23 18:05:01.817] DML Start [2025-09-23 18:05:02.009] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:05:02.168] DML res1: 0 [2025-09-23 18:05:02.688] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:05:02.688] Read Success [2025-09-23 18:05:02.688] Verifying certificate... [2025-09-23 18:05:02.912] Verified OK [2025-09-23 18:05:02.928] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:05:04.566] Verified OK [2025-09-23 18:05:04.566] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:05:05.157] Verified OK [2025-09-23 18:05:05.157] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:05:07.780] fs.protected_hardlinks = 1 [2025-09-23 18:05:07.780] fs.protected_symlinks = 1 [2025-09-23 18:05:07.780] kernel.modules_disabled = 1 [2025-09-23 18:05:07.988] [2025-09-23 18:05:07.988] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:05:09.218] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:05:16.979] SBL1:1210.0.1.0 [2025-09-23 18:05:17.011] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:05:18.594] SBL2:1210.0.1.0 [2025-09-23 18:05:18.625] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:05:18.737] j-A [2025-09-23 18:05:26.113] The R5 Autosar Classic is running [2025-09-23 18:05:26.113] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:05:26.113] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:05:26.720] INIT: version 2.96 booting [2025-09-23 18:05:26.832] INIT: Entering runlevel: 5 [2025-09-23 18:05:26.992] mtd32 attached [2025-09-23 18:05:26.992] mtd24 attached [2025-09-23 18:05:27.008] mtd28 attached [2025-09-23 18:05:27.056] RTNETLINK answers: File exists [2025-09-23 18:05:27.122] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:05:27.123] ubi2:animations is mounted. [2025-09-23 18:05:27.123] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:05:27.123] ubi0:dml_code is mounted. [2025-09-23 18:05:27.123] ubi1:textures is mounted. [2025-09-23 18:05:27.123] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:05:27.123] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:05:27.123] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:05:27.123] data.LB_FadeInType0=100 [2025-09-23 18:05:27.123] data.CHLH_FadeInType0=0 [2025-09-23 18:05:27.123] data.WU_FadeInDelay=0 [2025-09-23 18:05:27.123] max_time_out=0 [2025-09-23 18:05:27.123] No splash screen [2025-09-23 18:05:27.123] stop dss Done [2025-09-23 18:05:27.191] /dev/mem opened. [2025-09-23 18:05:27.191] Memory mapped at address 0xffffa6f6d000. [2025-09-23 18:05:27.191] Read at address 0x00600018 (0xffffa6f6d018): 0x00000000 [2025-09-23 18:05:27.191] Write at address 0x00600018 (0xffffa6f6d018): 0x00400040, readback 0x00400040 [2025-09-23 18:05:27.191] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:05:27.191] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:05:27.287] Loaded PowerVR consumer services. [2025-09-23 18:05:27.463] Waiting data available... [2025-09-23 18:05:27.479] 512+0 records in [2025-09-23 18:05:27.479] 512+0 records out [2025-09-23 18:05:27.511] Starting syslogd/klogd: done [2025-09-23 18:05:27.543] DML Start [2025-09-23 18:05:27.703] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:05:27.895] DML res1: 0 [2025-09-23 18:05:28.359] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:05:28.380] Read Success [2025-09-23 18:05:28.380] Verifying certificate... [2025-09-23 18:05:28.619] Verified OK [2025-09-23 18:05:28.619] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:05:30.320] Verified OK [2025-09-23 18:05:30.320] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:05:30.937] Verified OK [2025-09-23 18:05:30.937] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:05:33.560] fs.protected_hardlinks = 1 [2025-09-23 18:05:33.560] fs.protected_symlinks = 1 [2025-09-23 18:05:33.576] kernel.modules_disabled = 1 [2025-09-23 18:05:33.767] [2025-09-23 18:05:33.767] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:05:34.950] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:05:42.699] SBL1:1210.0.1.0 [2025-09-23 18:05:42.731] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:05:44.314] SBL2:1210.0.1.0 [2025-09-23 18:05:44.345] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:05:44.458] j-A [2025-09-23 18:05:51.812] The R5 Autosar Classic is running [2025-09-23 18:05:51.812] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:05:51.833] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:05:52.441] INIT: version 2.96 booting [2025-09-23 18:05:52.553] INIT: Entering runlevel: 5 [2025-09-23 18:05:52.713] mtd24 attached [2025-09-23 18:05:52.713] mtd28 attached [2025-09-23 18:05:52.728] mtd32 attached [2025-09-23 18:05:52.776] RTNETLINK answers: File exists [2025-09-23 18:05:52.843] ubi1:animations is mounted. [2025-09-23 18:05:52.843] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:05:52.843] ubi0:textures is mounted. [2025-09-23 18:05:52.843] ubi2:dml_code is mounted. [2025-09-23 18:05:52.843] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:05:52.843] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:05:52.843] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:05:52.843] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:05:52.843] data.LB_FadeInType0=100 [2025-09-23 18:05:52.843] data.CHLH_FadeInType0=0 [2025-09-23 18:05:52.843] data.WU_FadeInDelay=0 [2025-09-23 18:05:52.843] max_time_out=0 [2025-09-23 18:05:52.843] No splash screen [2025-09-23 18:05:52.843] stop dss Done [2025-09-23 18:05:52.891] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:05:52.929] /dev/mem opened. [2025-09-23 18:05:52.929] Memory mapped at address 0xffff9ac25000. [2025-09-23 18:05:52.929] Read at address 0x00600018 (0xffff9ac25018): 0x00000000 [2025-09-23 18:05:52.929] Write at address 0x00600018 (0xffff9ac25018): 0x00400040, readback 0x00400040 [2025-09-23 18:05:52.929] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:05:53.089] Loaded PowerVR consumer services. [2025-09-23 18:05:53.185] Waiting data available... [2025-09-23 18:05:53.201] 512+0 records in [2025-09-23 18:05:53.201] 512+0 records out [2025-09-23 18:05:53.250] Starting syslogd/klogd: done [2025-09-23 18:05:53.266] DML Start [2025-09-23 18:05:53.425] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:05:53.681] DML res1: 0 [2025-09-23 18:05:54.073] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:05:54.073] Read Success [2025-09-23 18:05:54.073] Verifying certificate... [2025-09-23 18:05:54.312] Verified OK [2025-09-23 18:05:54.328] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:05:55.958] Verified OK [2025-09-23 18:05:55.958] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:05:56.598] Verified OK [2025-09-23 18:05:56.613] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:05:59.316] fs.protected_hardlinks = 1 [2025-09-23 18:05:59.316] fs.protected_symlinks = 1 [2025-09-23 18:05:59.332] kernel.modules_disabled = 1 [2025-09-23 18:05:59.507] [2025-09-23 18:05:59.507] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:06:00.704] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:06:08.447] SBL1:1210.0.1.0 [2025-09-23 18:06:08.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:06:10.063] SBL2:1210.0.1.0 [2025-09-23 18:06:10.094] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:06:10.206] j-A [2025-09-23 18:06:17.579] The R5 Autosar Classic is running [2025-09-23 18:06:17.579] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:06:17.579] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:06:18.186] INIT: version 2.96 booting [2025-09-23 18:06:18.299] INIT: Entering runlevel: 5 [2025-09-23 18:06:18.442] mtd24 attached [2025-09-23 18:06:18.458] mtd32 attached [2025-09-23 18:06:18.474] mtd28 attached [2025-09-23 18:06:18.490] ubi0:textures is mounted. [2025-09-23 18:06:18.522] RTNETLINK answers: File exists [2025-09-23 18:06:18.522] ubi1:dml_code is mounted. [2025-09-23 18:06:18.581] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:06:18.581] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:06:18.581] ubi2:animations is mounted. [2025-09-23 18:06:18.581] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:06:18.581] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:06:18.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:06:18.581] data.LB_FadeInType0=100 [2025-09-23 18:06:18.581] data.CHLH_FadeInType0=0 [2025-09-23 18:06:18.581] data.WU_FadeInDelay=0 [2025-09-23 18:06:18.581] max_time_out=0 [2025-09-23 18:06:18.581] No splash screen [2025-09-23 18:06:18.581] stop dss Done [2025-09-23 18:06:18.629] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:06:18.667] /dev/mem opened. [2025-09-23 18:06:18.667] Memory mapped at address 0xffffba329000. [2025-09-23 18:06:18.667] Read at address 0x00600018 (0xffffba329018): 0x00000000 [2025-09-23 18:06:18.667] Write at address 0x00600018 (0xffffba329018): 0x00400040, readback 0x00400040 [2025-09-23 18:06:18.667] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:06:18.843] Loaded PowerVR consumer services. [2025-09-23 18:06:18.938] Waiting data available... [2025-09-23 18:06:18.955] 512+0 records in [2025-09-23 18:06:18.955] 512+0 records out [2025-09-23 18:06:19.003] Starting syslogd/klogd: done [2025-09-23 18:06:19.019] DML Start [2025-09-23 18:06:19.227] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:06:19.402] DML res1: 0 [2025-09-23 18:06:19.866] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:06:19.887] Read Success [2025-09-23 18:06:19.887] Verifying certificate... [2025-09-23 18:06:20.127] Verified OK [2025-09-23 18:06:20.127] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:06:21.785] Verified OK [2025-09-23 18:06:21.785] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:06:22.425] Verified OK [2025-09-23 18:06:22.425] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:06:25.111] fs.protected_hardlinks = 1 [2025-09-23 18:06:25.111] fs.protected_symlinks = 1 [2025-09-23 18:06:25.127] kernel.modules_disabled = 1 [2025-09-23 18:06:25.319] [2025-09-23 18:06:25.319] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:06:26.445] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:06:34.151] SBL1:1210.0.1.0 [2025-09-23 18:06:34.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:06:35.766] SBL2:1210.0.1.0 [2025-09-23 18:06:35.814] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:06:35.910] j-A [2025-09-23 18:06:43.265] The R5 Autosar Classic is running [2025-09-23 18:06:43.290] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:06:43.290] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:06:43.897] INIT: version 2.96 booting [2025-09-23 18:06:44.009] INIT: Entering runlevel: 5 [2025-09-23 18:06:44.169] mtd24 attached [2025-09-23 18:06:44.169] mtd28 attached [2025-09-23 18:06:44.185] mtd32 attached [2025-09-23 18:06:44.233] ubi0:textures is mounted. [2025-09-23 18:06:44.267] RTNETLINK answers: File exists [2025-09-23 18:06:44.267] ubi1:animations is mounted. [2025-09-23 18:06:44.267] ubi2:dml_code is mounted. [2025-09-23 18:06:44.267] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:06:44.267] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:06:44.267] data.LB_FadeInType0=100 [2025-09-23 18:06:44.299] data.CHLH_FadeInType0=0 [2025-09-23 18:06:44.299] data.WU_FadeInDelay=0 [2025-09-23 18:06:44.299] max_time_out=0 [2025-09-23 18:06:44.299] No splash screen [2025-09-23 18:06:44.299] stop dss Done [2025-09-23 18:06:44.299] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:06:44.299] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:06:44.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:06:44.331] /dev/mem opened. [2025-09-23 18:06:44.331] Memory mapped at address 0xffffa2e3f000. [2025-09-23 18:06:44.357] Read at address 0x00600018 (0xffffa2e3f018): 0x00000000 [2025-09-23 18:06:44.357] Write at address 0x00600018 (0xffffa2e3f018): 0x00400040, readback 0x00400040 [2025-09-23 18:06:44.389] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:06:44.404] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:06:44.468] Loaded PowerVR consumer services. [2025-09-23 18:06:44.644] Waiting data available... [2025-09-23 18:06:44.676] 512+0 records in [2025-09-23 18:06:44.676] 512+0 records out [2025-09-23 18:06:44.724] Starting syslogd/klogd: done [2025-09-23 18:06:44.724] DML Start [2025-09-23 18:06:44.900] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:06:45.109] DML res1: 0 [2025-09-23 18:06:45.593] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:06:45.593] Read Success [2025-09-23 18:06:45.593] Verifying certificate... [2025-09-23 18:06:45.817] Verified OK [2025-09-23 18:06:45.832] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:06:47.486] Verified OK [2025-09-23 18:06:47.486] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:06:48.099] Verified OK [2025-09-23 18:06:48.099] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:06:50.706] fs.protected_hardlinks = 1 [2025-09-23 18:06:50.706] fs.protected_symlinks = 1 [2025-09-23 18:06:50.706] kernel.modules_disabled = 1 [2025-09-23 18:06:50.914] [2025-09-23 18:06:50.914] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:06:52.180] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:06:59.846] SBL1:1210.0.1.0 [2025-09-23 18:06:59.894] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:07:01.477] SBL2:1210.0.1.0 [2025-09-23 18:07:01.509] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:07:01.620] j-A [2025-09-23 18:07:08.994] The R5 Autosar Classic is running [2025-09-23 18:07:08.994] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:07:08.994] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:07:09.601] INIT: version 2.96 booting [2025-09-23 18:07:09.697] INIT: Entering runlevel: 5 [2025-09-23 18:07:09.857] mtd24 attached [2025-09-23 18:07:09.873] mtd28 attached [2025-09-23 18:07:09.889] mtd32 attached [2025-09-23 18:07:09.992] ubi0:textures is mounted. [2025-09-23 18:07:09.992] RTNETLINK answers: File exists [2025-09-23 18:07:09.992] ubi1:animations is mounted. [2025-09-23 18:07:09.992] ubi2:dml_code is mounted. [2025-09-23 18:07:09.992] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:07:09.992] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:07:09.992] data.LB_FadeInType0=100 [2025-09-23 18:07:09.992] data.CHLH_FadeInType0=0 [2025-09-23 18:07:09.992] data.WU_FadeInDelay=0 [2025-09-23 18:07:09.992] max_time_out=0 [2025-09-23 18:07:09.992] No splash screen [2025-09-23 18:07:09.992] stop dss Done [2025-09-23 18:07:09.992] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:07:09.992] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:07:09.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:07:10.059] /dev/mem opened. [2025-09-23 18:07:10.059] Memory mapped at address 0xffffbe62e000. [2025-09-23 18:07:10.059] Read at address 0x00600018 (0xffffbe62e018): 0x00000000 [2025-09-23 18:07:10.059] Write at address 0x00600018 (0xffffbe62e018): 0x00400040, readback 0x00400040 [2025-09-23 18:07:10.083] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:07:10.083] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:07:10.179] Loaded PowerVR consumer services. [2025-09-23 18:07:10.354] Waiting data available... [2025-09-23 18:07:10.387] 512+0 records in [2025-09-23 18:07:10.387] 512+0 records out [2025-09-23 18:07:10.419] Starting syslogd/klogd: done [2025-09-23 18:07:10.435] DML Start [2025-09-23 18:07:10.611] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:07:10.867] DML res1: 0 [2025-09-23 18:07:11.274] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:07:11.274] Read Success [2025-09-23 18:07:11.274] Verifying certificate... [2025-09-23 18:07:11.530] Verified OK [2025-09-23 18:07:11.546] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:07:13.176] Verified OK [2025-09-23 18:07:13.176] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:07:13.734] Verified OK [2025-09-23 18:07:13.734] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:07:16.261] fs.protected_hardlinks = 1 [2025-09-23 18:07:16.277] fs.protected_symlinks = 1 [2025-09-23 18:07:16.277] kernel.modules_disabled = 1 [2025-09-23 18:07:16.485] [2025-09-23 18:07:16.485] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:07:17.870] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:07:25.555] SBL1:1210.0.1.0 [2025-09-23 18:07:25.587] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:07:27.169] SBL2:1210.0.1.0 [2025-09-23 18:07:27.218] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 18:07:27.313] j-A [2025-09-23 18:07:34.668] The R5 Autosar Classic is running [2025-09-23 18:07:34.668] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:07:34.689] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:07:35.297] INIT: version 2.96 booting [2025-09-23 18:07:35.408] INIT: Entering runlevel: 5 [2025-09-23 18:07:35.569] mtd24 attached [2025-09-23 18:07:35.569] mtd28 attached [2025-09-23 18:07:35.601] mtd32 attached [2025-09-23 18:07:35.601] ubi0:textures is mounted. [2025-09-23 18:07:35.633] ubi1:animations is mounted. [2025-09-23 18:07:35.633] RTNETLINK answers: File exists [2025-09-23 18:07:35.693] ubi2:dml_code is mounted. [2025-09-23 18:07:35.693] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:07:35.693] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:07:35.693] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:07:35.694] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:07:35.694] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:07:35.694] data.LB_FadeInType0=100 [2025-09-23 18:07:35.694] data.CHLH_FadeInType0=0 [2025-09-23 18:07:35.694] data.WU_FadeInDelay=0 [2025-09-23 18:07:35.694] max_time_out=0 [2025-09-23 18:07:35.694] No splash screen [2025-09-23 18:07:35.694] stop dss Done [2025-09-23 18:07:35.725] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:07:35.758] /dev/mem opened. [2025-09-23 18:07:35.758] Memory mapped at address 0xffff83d61000. [2025-09-23 18:07:35.758] Read at address 0x00600018 (0xffff83d61018): 0x00000000 [2025-09-23 18:07:35.758] Write at address 0x00600018 (0xffff83d61018): 0x00400040, readback 0x00400040 [2025-09-23 18:07:35.758] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:07:35.902] Loaded PowerVR consumer services. [2025-09-23 18:07:36.046] Waiting data available... [2025-09-23 18:07:36.062] 512+0 records in [2025-09-23 18:07:36.062] 512+0 records out [2025-09-23 18:07:36.094] Starting syslogd/klogd: done [2025-09-23 18:07:36.110] DML Start [2025-09-23 18:07:36.253] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:07:36.461] DML res1: 0 [2025-09-23 18:07:36.957] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:07:36.978] Read Success [2025-09-23 18:07:36.978] Verifying certificate... [2025-09-23 18:07:37.202] Verified OK [2025-09-23 18:07:37.234] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:07:38.897] Verified OK [2025-09-23 18:07:38.913] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:07:39.535] Verified OK [2025-09-23 18:07:39.535] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:07:42.077] fs.protected_hardlinks = 1 [2025-09-23 18:07:42.094] fs.protected_symlinks = 1 [2025-09-23 18:07:42.110] kernel.modules_disabled = 1 [2025-09-23 18:07:42.301] [2025-09-23 18:07:42.301] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:07:43.527] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:07:51.250] SBL1:1210.0.1.0 [2025-09-23 18:07:51.298] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 18:07:52.865] SBL2:1210.0.1.0 [2025-09-23 18:07:52.913] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:07:53.025] j-A [2025-09-23 18:08:00.364] The R5 Autosar Classic is running [2025-09-23 18:08:00.389] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:08:00.389] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:08:00.996] INIT: version 2.96 booting [2025-09-23 18:08:01.108] INIT: Entering runlevel: 5 [2025-09-23 18:08:01.268] mtd32 attached [2025-09-23 18:08:01.284] mtd28 attached [2025-09-23 18:08:01.284] mtd24 attached [2025-09-23 18:08:01.332] ubi1:animations is mounted. [2025-09-23 18:08:01.398] RTNETLINK answers: File exists [2025-09-23 18:08:01.398] ubi2:textures is mounted. [2025-09-23 18:08:01.398] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:08:01.398] ubi0:dml_code is mounted. [2025-09-23 18:08:01.398] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:08:01.398] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:08:01.398] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:08:01.398] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:08:01.398] data.LB_FadeInType0=100 [2025-09-23 18:08:01.398] data.CHLH_FadeInType0=0 [2025-09-23 18:08:01.398] data.WU_FadeInDelay=0 [2025-09-23 18:08:01.398] max_time_out=0 [2025-09-23 18:08:01.398] No splash screen [2025-09-23 18:08:01.398] stop dss Done [2025-09-23 18:08:01.485] /dev/mem opened. [2025-09-23 18:08:01.485] Memory mapped at address 0xffff974d8000. [2025-09-23 18:08:01.485] Read at address 0x00600018 (0xffff974d8018): 0x00000000 [2025-09-23 18:08:01.485] Write at address 0x00600018 (0xffff974d8018): 0x00400040, readback 0x00400040 [2025-09-23 18:08:01.485] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:08:01.485] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:08:01.725] Loaded PowerVR consumer services. [2025-09-23 18:08:01.773] Waiting data available... [2025-09-23 18:08:01.788] 512+0 records in [2025-09-23 18:08:01.788] 512+0 records out [2025-09-23 18:08:01.821] Starting syslogd/klogd: done [2025-09-23 18:08:01.837] DML Start [2025-09-23 18:08:02.029] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:08:02.269] DML res1: 0 [2025-09-23 18:08:02.653] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:08:02.668] Read Success [2025-09-23 18:08:02.668] Verifying certificate... [2025-09-23 18:08:02.908] Verified OK [2025-09-23 18:08:02.924] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:08:04.629] Verified OK [2025-09-23 18:08:04.629] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:08:05.185] Verified OK [2025-09-23 18:08:05.185] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:08:07.728] fs.protected_hardlinks = 1 [2025-09-23 18:08:07.744] fs.protected_symlinks = 1 [2025-09-23 18:08:07.744] kernel.modules_disabled = 1 [2025-09-23 18:08:07.936] [2025-09-23 18:08:07.936] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:08:09.304] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:08:16.965] SBL1:1210.0.1.0 [2025-09-23 18:08:17.013] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:08:18.580] SBL2:1210.0.1.0 [2025-09-23 18:08:18.628] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:08:18.740] j-A [2025-09-23 18:08:26.079] The R5 Autosar Classic is running [2025-09-23 18:08:26.104] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:08:26.104] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:08:26.712] INIT: version 2.96 booting [2025-09-23 18:08:26.824] INIT: Entering runlevel: 5 [2025-09-23 18:08:26.984] mtd28 attached [2025-09-23 18:08:26.984] mtd24 attached [2025-09-23 18:08:27.000] mtd32 attached [2025-09-23 18:08:27.048] RTNETLINK answers: File exists [2025-09-23 18:08:27.112] ubi0:animations is mounted. [2025-09-23 18:08:27.112] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:08:27.112] ubi1:textures is mounted. [2025-09-23 18:08:27.112] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:08:27.112] ubi2:dml_code is mounted. [2025-09-23 18:08:27.112] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:08:27.112] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:08:27.112] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:08:27.112] data.LB_FadeInType0=100 [2025-09-23 18:08:27.112] data.CHLH_FadeInType0=0 [2025-09-23 18:08:27.112] data.WU_FadeInDelay=0 [2025-09-23 18:08:27.112] max_time_out=0 [2025-09-23 18:08:27.112] No splash screen [2025-09-23 18:08:27.112] stop dss Done [2025-09-23 18:08:27.182] /dev/mem opened. [2025-09-23 18:08:27.182] Memory mapped at address 0xffffb49be000. [2025-09-23 18:08:27.182] Read at address 0x00600018 (0xffffb49be018): 0x00000000 [2025-09-23 18:08:27.182] Write at address 0x00600018 (0xffffb49be018): 0x00400040, readback 0x00400040 [2025-09-23 18:08:27.211] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:08:27.211] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:08:27.467] Loaded PowerVR consumer services. [2025-09-23 18:08:27.483] Waiting data available... [2025-09-23 18:08:27.515] 512+0 records in [2025-09-23 18:08:27.515] 512+0 records out [2025-09-23 18:08:27.547] Starting syslogd/klogd: done [2025-09-23 18:08:27.563] DML Start [2025-09-23 18:08:27.754] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:08:27.978] DML res1: 0 [2025-09-23 18:08:28.361] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:08:28.361] Read Success [2025-09-23 18:08:28.361] Verifying certificate... [2025-09-23 18:08:28.585] Verified OK [2025-09-23 18:08:28.601] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:08:30.200] Verified OK [2025-09-23 18:08:30.200] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:08:30.807] Verified OK [2025-09-23 18:08:30.807] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:08:33.525] fs.protected_hardlinks = 1 [2025-09-23 18:08:33.525] fs.protected_symlinks = 1 [2025-09-23 18:08:33.541] kernel.modules_disabled = 1 [2025-09-23 18:08:33.734] [2025-09-23 18:08:33.734] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:08:35.028] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:08:42.678] SBL1:1210.0.1.0 [2025-09-23 18:08:42.726] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:08:44.293] SBL2:1210.0.1.0 [2025-09-23 18:08:44.341] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:08:44.437] j-A [2025-09-23 18:08:51.793] The R5 Autosar Classic is running [2025-09-23 18:08:51.816] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:08:51.816] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:08:52.423] INIT: version 2.96 booting [2025-09-23 18:08:52.535] INIT: Entering runlevel: 5 [2025-09-23 18:08:52.679] mtd24 attached [2025-09-23 18:08:52.696] mtd28 attached [2025-09-23 18:08:52.711] mtd32 attached [2025-09-23 18:08:52.760] RTNETLINK answers: File exists [2025-09-23 18:08:52.818] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:08:52.818] ubi2:dml_code is mounted. [2025-09-23 18:08:52.818] ubi1:animations is mounted. [2025-09-23 18:08:52.818] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:08:52.818] ubi0:textures is mounted. [2025-09-23 18:08:52.818] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:08:52.818] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:08:52.818] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:08:52.818] data.LB_FadeInType0=100 [2025-09-23 18:08:52.818] data.CHLH_FadeInType0=0 [2025-09-23 18:08:52.818] data.WU_FadeInDelay=0 [2025-09-23 18:08:52.818] max_time_out=0 [2025-09-23 18:08:52.818] No splash screen [2025-09-23 18:08:52.818] stop dss Done [2025-09-23 18:08:52.901] /dev/mem opened. [2025-09-23 18:08:52.901] Memory mapped at address 0xffffa070b000. [2025-09-23 18:08:52.901] Read at address 0x00600018 (0xffffa070b018): 0x00000000 [2025-09-23 18:08:52.901] Write at address 0x00600018 (0xffffa070b018): 0x00400040, readback 0x00400040 [2025-09-23 18:08:52.901] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:08:52.917] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:08:53.077] Loaded PowerVR consumer services. [2025-09-23 18:08:53.173] Waiting data available... [2025-09-23 18:08:53.205] 512+0 records in [2025-09-23 18:08:53.205] 512+0 records out [2025-09-23 18:08:53.237] Starting syslogd/klogd: done [2025-09-23 18:08:53.253] DML Start [2025-09-23 18:08:53.413] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:08:53.589] DML res1: 0 [2025-09-23 18:08:54.131] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:08:54.131] Read Success [2025-09-23 18:08:54.131] Verifying certificate... [2025-09-23 18:08:54.354] Verified OK [2025-09-23 18:08:54.386] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:08:56.138] Verified OK [2025-09-23 18:08:56.138] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:08:56.669] Verified OK [2025-09-23 18:08:56.669] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:08:59.100] fs.protected_hardlinks = 1 [2025-09-23 18:08:59.116] fs.protected_symlinks = 1 [2025-09-23 18:08:59.116] kernel.modules_disabled = 1 [2025-09-23 18:08:59.323] [2025-09-23 18:08:59.323] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:09:00.662] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:09:08.384] SBL1:1210.0.1.0 [2025-09-23 18:09:08.432] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:09:09.999] SBL2:1210.0.1.0 [2025-09-23 18:09:10.047] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:09:10.142] j-A [2025-09-23 18:09:17.499] The R5 Autosar Classic is running [2025-09-23 18:09:17.520] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:09:17.520] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:09:18.129] INIT: version 2.96 booting [2025-09-23 18:09:18.256] INIT: Entering runlevel: 5 [2025-09-23 18:09:18.400] mtd24 attached [2025-09-23 18:09:18.416] mtd28 attached [2025-09-23 18:09:18.448] mtd32 attached [2025-09-23 18:09:18.448] ubi0:textures is mounted. [2025-09-23 18:09:18.465] ubi1:animations is mounted. [2025-09-23 18:09:18.481] RTNETLINK answers: File exists [2025-09-23 18:09:18.511] ubi2:dml_code is mounted. [2025-09-23 18:09:18.511] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:09:18.511] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:09:18.511] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:09:18.511] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:09:18.539] data.LB_FadeInType0=100 [2025-09-23 18:09:18.539] data.CHLH_FadeInType0=0 [2025-09-23 18:09:18.539] data.WU_FadeInDelay=0 [2025-09-23 18:09:18.539] max_time_out=0 [2025-09-23 18:09:18.539] No splash screen [2025-09-23 18:09:18.539] stop dss Done [2025-09-23 18:09:18.539] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:09:18.615] /dev/mem opened. [2025-09-23 18:09:18.615] Memory mapped at address 0xffffa166f000. [2025-09-23 18:09:18.615] Read at address 0x00600018 (0xffffa166f018): 0x00000000 [2025-09-23 18:09:18.615] Write at address 0x00600018 (0xffffa166f018): 0x00400040, readback 0x00400040 [2025-09-23 18:09:18.615] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:09:18.615] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:09:18.871] Loaded PowerVR consumer services. [2025-09-23 18:09:18.871] Waiting data available... [2025-09-23 18:09:18.903] 512+0 records in [2025-09-23 18:09:18.919] 512+0 records out [2025-09-23 18:09:18.951] Starting syslogd/klogd: done [2025-09-23 18:09:18.967] DML Start [2025-09-23 18:09:19.143] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:09:19.335] DML res1: 0 [2025-09-23 18:09:19.782] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:09:19.803] Read Success [2025-09-23 18:09:19.803] Verifying certificate... [2025-09-23 18:09:20.028] Verified OK [2025-09-23 18:09:20.028] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:09:21.706] Verified OK [2025-09-23 18:09:21.706] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:09:22.306] Verified OK [2025-09-23 18:09:22.306] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:09:24.832] fs.protected_hardlinks = 1 [2025-09-23 18:09:24.832] fs.protected_symlinks = 1 [2025-09-23 18:09:24.847] kernel.modules_disabled = 1 [2025-09-23 18:09:25.040] [2025-09-23 18:09:25.040] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:09:26.395] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:09:34.095] SBL1:1210.0.1.0 [2025-09-23 18:09:34.143] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:09:35.709] SBL2:1210.0.1.0 [2025-09-23 18:09:35.757] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:09:35.852] j-A [2025-09-23 18:09:43.208] The R5 Autosar Classic is running [2025-09-23 18:09:43.231] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:09:43.231] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:09:43.839] INIT: version 2.96 booting [2025-09-23 18:09:43.950] INIT: Entering runlevel: 5 [2025-09-23 18:09:44.095] mtd24 attached [2025-09-23 18:09:44.111] mtd28 attached [2025-09-23 18:09:44.126] mtd32 attached [2025-09-23 18:09:44.159] ubi0:textures is mounted. [2025-09-23 18:09:44.175] RTNETLINK answers: File exists [2025-09-23 18:09:44.175] ubi1:animations is mounted. [2025-09-23 18:09:44.237] ubi2:dml_code is mounted. [2025-09-23 18:09:44.237] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:09:44.237] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:09:44.237] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:09:44.237] data.LB_FadeInType0=100 [2025-09-23 18:09:44.237] data.CHLH_FadeInType0=0 [2025-09-23 18:09:44.237] data.WU_FadeInDelay=0 [2025-09-23 18:09:44.237] max_time_out=0 [2025-09-23 18:09:44.237] No splash screen [2025-09-23 18:09:44.237] stop dss Done [2025-09-23 18:09:44.237] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:09:44.237] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:09:44.310] /dev/mem opened. [2025-09-23 18:09:44.310] Memory mapped at address 0xffffb7409000. [2025-09-23 18:09:44.310] Read at address 0x00600018 (0xffffb7409018): 0x00000000 [2025-09-23 18:09:44.310] Write at address 0x00600018 (0xffffb7409018): 0x00400040, readback 0x00400040 [2025-09-23 18:09:44.310] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:09:44.310] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:09:44.437] Loaded PowerVR consumer services. [2025-09-23 18:09:44.582] Waiting data available... [2025-09-23 18:09:44.614] 512+0 records in [2025-09-23 18:09:44.614] 512+0 records out [2025-09-23 18:09:44.630] Starting syslogd/klogd: done [2025-09-23 18:09:44.646] DML Start [2025-09-23 18:09:44.837] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:09:45.029] DML res1: 0 [2025-09-23 18:09:45.523] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:09:45.523] Read Success [2025-09-23 18:09:45.523] Verifying certificate... [2025-09-23 18:09:45.747] Verified OK [2025-09-23 18:09:45.779] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:09:47.521] Verified OK [2025-09-23 18:09:47.521] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:09:48.111] Verified OK [2025-09-23 18:09:48.111] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:09:50.589] fs.protected_hardlinks = 1 [2025-09-23 18:09:50.589] fs.protected_symlinks = 1 [2025-09-23 18:09:50.606] kernel.modules_disabled = 1 [2025-09-23 18:09:50.797] [2025-09-23 18:09:50.797] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:09:52.063] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:09:59.800] SBL1:1210.0.1.0 [2025-09-23 18:09:59.848] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:10:01.414] SBL2:1210.0.1.0 [2025-09-23 18:10:01.462] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:10:01.575] j-A [2025-09-23 18:10:08.947] The R5 Autosar Classic is running [2025-09-23 18:10:08.947] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:10:08.947] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:10:09.554] INIT: version 2.96 booting [2025-09-23 18:10:09.666] INIT: Entering runlevel: 5 [2025-09-23 18:10:09.811] mtd32 attached [2025-09-23 18:10:09.827] mtd24 attached [2025-09-23 18:10:09.843] mtd28 attached [2025-09-23 18:10:09.896] ubi0:dml_code is mounted. [2025-09-23 18:10:09.896] ubi1:textures is mounted. [2025-09-23 18:10:09.896] RTNETLINK answers: File exists [2025-09-23 18:10:09.896] ubi2:animations is mounted. [2025-09-23 18:10:09.946] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:10:09.946] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:10:09.946] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:10:09.946] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:10:09.946] data.LB_FadeInType0=100 [2025-09-23 18:10:09.946] data.CHLH_FadeInType0=0 [2025-09-23 18:10:09.946] data.WU_FadeInDelay=0 [2025-09-23 18:10:09.946] max_time_out=0 [2025-09-23 18:10:09.946] No splash screen [2025-09-23 18:10:09.946] stop dss Done [2025-09-23 18:10:09.946] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:10:09.978] /dev/mem opened. [2025-09-23 18:10:10.015] Memory mapped at address 0xffff86c10000. [2025-09-23 18:10:10.015] Read at address 0x00600018 (0xffff86c10018): 0x00000000 [2025-09-23 18:10:10.015] Write at address 0x00600018 (0xffff86c10018): 0x00400040, readback 0x00400040 [2025-09-23 18:10:10.015] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:10:10.015] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:10:10.176] Loaded PowerVR consumer services. [2025-09-23 18:10:10.303] Waiting data available... [2025-09-23 18:10:10.335] 512+0 records in [2025-09-23 18:10:10.335] 512+0 records out [2025-09-23 18:10:10.383] Starting syslogd/klogd: done [2025-09-23 18:10:10.383] DML Start [2025-09-23 18:10:10.543] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:10:10.783] DML res1: 0 [2025-09-23 18:10:11.195] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:10:11.195] Read Success [2025-09-23 18:10:11.195] Verifying certificate... [2025-09-23 18:10:11.435] Verified OK [2025-09-23 18:10:11.451] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:10:13.054] Verified OK [2025-09-23 18:10:13.054] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:10:13.672] Verified OK [2025-09-23 18:10:13.672] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:10:16.295] fs.protected_hardlinks = 1 [2025-09-23 18:10:16.311] fs.protected_symlinks = 1 [2025-09-23 18:10:16.327] kernel.modules_disabled = 1 [2025-09-23 18:10:16.519] [2025-09-23 18:10:16.519] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:10:17.834] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:10:25.519] SBL1:1210.0.1.0 [2025-09-23 18:10:25.567] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:10:27.134] SBL2:1210.0.1.0 [2025-09-23 18:10:27.182] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:10:27.294] j-A [2025-09-23 18:10:34.666] The R5 Autosar Classic is running [2025-09-23 18:10:34.666] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:10:34.666] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:10:35.273] INIT: version 2.96 booting [2025-09-23 18:10:35.386] INIT: Entering runlevel: 5 [2025-09-23 18:10:35.530] mtd28 attached [2025-09-23 18:10:35.545] mtd24 attached [2025-09-23 18:10:35.561] mtd32 attached [2025-09-23 18:10:35.578] ubi0:animations is mounted. [2025-09-23 18:10:35.609] RTNETLINK answers: File exists [2025-09-23 18:10:35.609] ubi2:textures is mounted. [2025-09-23 18:10:35.630] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:10:35.630] ubi1:dml_code is mounted. [2025-09-23 18:10:35.630] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:10:35.667] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:10:35.667] data.LB_FadeInType0=100 [2025-09-23 18:10:35.667] data.CHLH_FadeInType0=0 [2025-09-23 18:10:35.667] data.WU_FadeInDelay=0 [2025-09-23 18:10:35.667] max_time_out=0 [2025-09-23 18:10:35.667] No splash screen [2025-09-23 18:10:35.667] stop dss Done [2025-09-23 18:10:35.667] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:10:35.667] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:10:35.734] /dev/mem opened. [2025-09-23 18:10:35.734] Memory mapped at address 0xffffa4827000. [2025-09-23 18:10:35.734] Read at address 0x00600018 (0xffffa4827018): 0x00000000 [2025-09-23 18:10:35.734] Write at address 0x00600018 (0xffffa4827018): 0x00400040, readback 0x00400040 [2025-09-23 18:10:35.734] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:10:35.759] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:10:35.839] Loaded PowerVR consumer services. [2025-09-23 18:10:35.998] Waiting data available... [2025-09-23 18:10:36.030] 512+0 records in [2025-09-23 18:10:36.030] 512+0 records out [2025-09-23 18:10:36.046] Starting syslogd/klogd: done [2025-09-23 18:10:36.078] DML Start [2025-09-23 18:10:36.222] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:10:36.414] DML res1: 0 [2025-09-23 18:10:36.969] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:10:36.969] Read Success [2025-09-23 18:10:36.969] Verifying certificate... [2025-09-23 18:10:37.209] Verified OK [2025-09-23 18:10:37.209] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:10:38.871] Verified OK [2025-09-23 18:10:38.871] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:10:39.509] Verified OK [2025-09-23 18:10:39.526] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:10:42.144] fs.protected_hardlinks = 1 [2025-09-23 18:10:42.144] fs.protected_symlinks = 1 [2025-09-23 18:10:42.144] kernel.modules_disabled = 1 [2025-09-23 18:10:42.320] [2025-09-23 18:10:42.320] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:10:43.483] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:10:51.209] SBL1:1210.0.1.0 [2025-09-23 18:10:51.257] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:10:52.824] SBL2:1210.0.1.0 [2025-09-23 18:10:52.872] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:10:52.968] j-A [2025-09-23 18:11:00.322] The R5 Autosar Classic is running [2025-09-23 18:11:00.348] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:11:00.348] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:11:00.955] INIT: version 2.96 booting [2025-09-23 18:11:01.067] INIT: Entering runlevel: 5 [2025-09-23 18:11:01.227] mtd24 attached [2025-09-23 18:11:01.227] mtd32 attached [2025-09-23 18:11:01.242] mtd28 attached [2025-09-23 18:11:01.275] ubi0:textures is mounted. [2025-09-23 18:11:01.290] ubi1:dml_code is mounted. [2025-09-23 18:11:01.357] RTNETLINK answers: File exists [2025-09-23 18:11:01.357] ubi2:animations is mounted. [2025-09-23 18:11:01.357] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:11:01.357] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:11:01.357] data.LB_FadeInType0=100 [2025-09-23 18:11:01.357] data.CHLH_FadeInType0=0 [2025-09-23 18:11:01.357] data.WU_FadeInDelay=0 [2025-09-23 18:11:01.357] max_time_out=0 [2025-09-23 18:11:01.357] No splash screen [2025-09-23 18:11:01.357] stop dss Done [2025-09-23 18:11:01.357] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:11:01.357] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:11:01.357] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:11:01.434] /dev/mem opened. [2025-09-23 18:11:01.434] Memory mapped at address 0xffffa38f8000. [2025-09-23 18:11:01.434] Read at address 0x00600018 (0xffffa38f8018): 0x00000000 [2025-09-23 18:11:01.434] Write at address 0x00600018 (0xffffa38f8018): 0x00400040, readback 0x00400040 [2025-09-23 18:11:01.434] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:11:01.434] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:11:01.610] Loaded PowerVR consumer services. [2025-09-23 18:11:01.723] Waiting data available... [2025-09-23 18:11:01.739] 512+0 records in [2025-09-23 18:11:01.739] 512+0 records out [2025-09-23 18:11:01.770] Starting syslogd/klogd: done [2025-09-23 18:11:01.786] DML Start [2025-09-23 18:11:01.963] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:11:02.203] DML res1: 0 [2025-09-23 18:11:02.641] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:11:02.641] Read Success [2025-09-23 18:11:02.641] Verifying certificate... [2025-09-23 18:11:02.849] Verified OK [2025-09-23 18:11:02.865] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:11:04.440] Verified OK [2025-09-23 18:11:04.440] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:11:05.048] Verified OK [2025-09-23 18:11:05.048] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:11:07.718] fs.protected_hardlinks = 1 [2025-09-23 18:11:07.718] fs.protected_symlinks = 1 [2025-09-23 18:11:07.734] kernel.modules_disabled = 1 [2025-09-23 18:11:07.926] [2025-09-23 18:11:07.926] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:11:09.244] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:11:16.935] SBL1:1210.0.1.0 [2025-09-23 18:11:16.983] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:11:18.551] SBL2:1210.0.1.0 [2025-09-23 18:11:18.598] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:11:18.694] j-A [2025-09-23 18:11:26.049] The R5 Autosar Classic is running [2025-09-23 18:11:26.074] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:11:26.074] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:11:26.681] INIT: version 2.96 booting [2025-09-23 18:11:26.794] INIT: Entering runlevel: 5 [2025-09-23 18:11:26.953] mtd32 attached [2025-09-23 18:11:26.953] mtd28 attached [2025-09-23 18:11:26.969] mtd24 attached [2025-09-23 18:11:27.017] ubi0:dml_code is mounted. [2025-09-23 18:11:27.017] RTNETLINK answers: File exists [2025-09-23 18:11:27.087] ubi1:animations is mounted. [2025-09-23 18:11:27.087] ubi2:textures is mounted. [2025-09-23 18:11:27.087] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:11:27.087] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:11:27.087] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:11:27.087] data.LB_FadeInType0=100 [2025-09-23 18:11:27.087] data.CHLH_FadeInType0=0 [2025-09-23 18:11:27.087] data.WU_FadeInDelay=0 [2025-09-23 18:11:27.087] max_time_out=0 [2025-09-23 18:11:27.087] No splash screen [2025-09-23 18:11:27.087] stop dss Done [2025-09-23 18:11:27.087] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:11:27.087] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:11:27.154] /dev/mem opened. [2025-09-23 18:11:27.154] Memory mapped at address 0xffffb5b9e000. [2025-09-23 18:11:27.154] Read at address 0x00600018 (0xffffb5b9e018): 0x00000000 [2025-09-23 18:11:27.154] Write at address 0x00600018 (0xffffb5b9e018): 0x00400040, readback 0x00400040 [2025-09-23 18:11:27.228] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:11:27.228] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:11:27.292] Loaded PowerVR consumer services. [2025-09-23 18:11:27.420] Waiting data available... [2025-09-23 18:11:27.452] 512+0 records in [2025-09-23 18:11:27.452] 512+0 records out [2025-09-23 18:11:27.468] Starting syslogd/klogd: done [2025-09-23 18:11:27.484] DML Start [2025-09-23 18:11:27.644] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:11:27.852] DML res1: 0 [2025-09-23 18:11:28.346] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:11:28.346] Read Success [2025-09-23 18:11:28.346] Verifying certificate... [2025-09-23 18:11:28.586] Verified OK [2025-09-23 18:11:28.602] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:11:30.210] Verified OK [2025-09-23 18:11:30.210] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:11:30.826] Verified OK [2025-09-23 18:11:30.826] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:11:33.369] fs.protected_hardlinks = 1 [2025-09-23 18:11:33.369] fs.protected_symlinks = 1 [2025-09-23 18:11:33.385] kernel.modules_disabled = 1 [2025-09-23 18:11:33.560] [2025-09-23 18:11:33.560] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:11:34.907] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:11:42.629] SBL1:1210.0.1.0 [2025-09-23 18:11:42.661] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:11:44.244] SBL2:1210.0.1.0 [2025-09-23 18:11:44.276] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:11:44.388] j-A [2025-09-23 18:11:51.743] The R5 Autosar Classic is running [2025-09-23 18:11:51.743] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:11:51.764] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:11:52.371] INIT: version 2.96 booting [2025-09-23 18:11:52.483] INIT: Entering runlevel: 5 [2025-09-23 18:11:52.627] mtd24 attached [2025-09-23 18:11:52.643] mtd28 attached [2025-09-23 18:11:52.659] mtd32 attached [2025-09-23 18:11:52.691] ubi0:textures is mounted. [2025-09-23 18:11:52.707] ubi1:animations is mounted. [2025-09-23 18:11:52.707] RTNETLINK answers: File exists [2025-09-23 18:11:52.768] ubi2:dml_code is mounted. [2025-09-23 18:11:52.768] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:11:52.768] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:11:52.768] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:11:52.768] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:11:52.768] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:11:52.768] data.LB_FadeInType0=100 [2025-09-23 18:11:52.768] data.CHLH_FadeInType0=0 [2025-09-23 18:11:52.768] data.WU_FadeInDelay=0 [2025-09-23 18:11:52.768] max_time_out=0 [2025-09-23 18:11:52.768] No splash screen [2025-09-23 18:11:52.768] stop dss Done [2025-09-23 18:11:52.862] /dev/mem opened. [2025-09-23 18:11:52.862] Memory mapped at address 0xffff98e5b000. [2025-09-23 18:11:52.862] Read at address 0x00600018 (0xffff98e5b018): 0x00000000 [2025-09-23 18:11:52.862] Write at address 0x00600018 (0xffff98e5b018): 0x00400040, readback 0x00400040 [2025-09-23 18:11:52.862] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:11:52.862] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:11:52.926] Loaded PowerVR consumer services. [2025-09-23 18:11:53.102] Waiting data available... [2025-09-23 18:11:53.134] 512+0 records in [2025-09-23 18:11:53.134] 512+0 records out [2025-09-23 18:11:53.166] Starting syslogd/klogd: done [2025-09-23 18:11:53.182] DML Start [2025-09-23 18:11:53.358] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:11:53.565] DML res1: 0 [2025-09-23 18:11:54.070] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:11:54.070] Read Success [2025-09-23 18:11:54.070] Verifying certificate... [2025-09-23 18:11:54.309] Verified OK [2025-09-23 18:11:54.325] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:11:55.925] Verified OK [2025-09-23 18:11:55.925] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:11:56.468] Verified OK [2025-09-23 18:11:56.468] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:11:59.043] fs.protected_hardlinks = 1 [2025-09-23 18:11:59.059] fs.protected_symlinks = 1 [2025-09-23 18:11:59.059] kernel.modules_disabled = 1 [2025-09-23 18:11:59.251] [2025-09-23 18:11:59.251] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:12:00.594] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:12:08.355] SBL1:1210.0.1.0 [2025-09-23 18:12:08.403] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:12:09.969] SBL2:1210.0.1.0 [2025-09-23 18:12:10.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:12:10.130] j-A [2025-09-23 18:12:17.469] The R5 Autosar Classic is running [2025-09-23 18:12:17.494] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:12:17.494] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:12:18.101] INIT: version 2.96 booting [2025-09-23 18:12:18.213] INIT: Entering runlevel: 5 [2025-09-23 18:12:18.373] mtd24 attached [2025-09-23 18:12:18.373] mtd32 attached [2025-09-23 18:12:18.389] mtd28 attached [2025-09-23 18:12:18.437] ubi0:textures is mounted. [2025-09-23 18:12:18.437] RTNETLINK answers: File exists [2025-09-23 18:12:18.475] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:12:18.475] ubi1:dml_code is mounted. [2025-09-23 18:12:18.475] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:12:18.475] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:12:18.475] ubi2:animations is mounted. [2025-09-23 18:12:18.475] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:12:18.475] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:12:18.500] data.LB_FadeInType0=100 [2025-09-23 18:12:18.500] data.CHLH_FadeInType0=0 [2025-09-23 18:12:18.500] data.WU_FadeInDelay=0 [2025-09-23 18:12:18.500] max_time_out=0 [2025-09-23 18:12:18.500] No splash screen [2025-09-23 18:12:18.500] stop dss Done [2025-09-23 18:12:18.532] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:12:18.548] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:12:18.581] /dev/mem opened. [2025-09-23 18:12:18.581] Memory mapped at address 0xffff8fca7000. [2025-09-23 18:12:18.581] Read at address 0x00600018 (0xffff8fca7018): 0x00000000 [2025-09-23 18:12:18.581] Write at address 0x00600018 (0xffff8fca7018): 0x00400040, readback 0x00400040 [2025-09-23 18:12:18.661] Loaded PowerVR consumer services. [2025-09-23 18:12:18.869] Waiting data available... [2025-09-23 18:12:18.886] 512+0 records in [2025-09-23 18:12:18.886] 512+0 records out [2025-09-23 18:12:18.918] Starting syslogd/klogd: done [2025-09-23 18:12:18.934] DML Start [2025-09-23 18:12:19.093] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:12:19.333] DML res1: 0 [2025-09-23 18:12:19.744] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:12:19.744] Read Success [2025-09-23 18:12:19.744] Verifying certificate... [2025-09-23 18:12:19.951] Verified OK [2025-09-23 18:12:19.983] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:12:21.711] Verified OK [2025-09-23 18:12:21.711] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:12:22.361] Verified OK [2025-09-23 18:12:22.361] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:12:24.936] fs.protected_hardlinks = 1 [2025-09-23 18:12:24.936] fs.protected_symlinks = 1 [2025-09-23 18:12:24.952] kernel.modules_disabled = 1 [2025-09-23 18:12:25.143] [2025-09-23 18:12:25.143] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:12:26.384] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:12:34.057] SBL1:1210.0.1.0 [2025-09-23 18:12:34.105] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:12:35.672] SBL2:1210.0.1.0 [2025-09-23 18:12:35.720] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:12:35.831] j-A [2025-09-23 18:12:43.204] The R5 Autosar Classic is running [2025-09-23 18:12:43.204] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:12:43.204] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:12:43.811] INIT: version 2.96 booting [2025-09-23 18:12:43.923] INIT: Entering runlevel: 5 [2025-09-23 18:12:44.083] mtd32 attached [2025-09-23 18:12:44.083] mtd24 attached [2025-09-23 18:12:44.099] mtd28 attached [2025-09-23 18:12:44.183] ubi0:dml_code is mounted. [2025-09-23 18:12:44.183] RTNETLINK answers: File exists [2025-09-23 18:12:44.183] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:12:44.183] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:12:44.183] ubi2:animations is mounted. [2025-09-23 18:12:44.183] ubi1:textures is mounted. [2025-09-23 18:12:44.183] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:12:44.183] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:12:44.183] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:12:44.183] data.LB_FadeInType0=100 [2025-09-23 18:12:44.204] data.CHLH_FadeInType0=0 [2025-09-23 18:12:44.204] data.WU_FadeInDelay=0 [2025-09-23 18:12:44.204] max_time_out=0 [2025-09-23 18:12:44.204] No splash screen [2025-09-23 18:12:44.204] stop dss Done [2025-09-23 18:12:44.252] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:12:44.286] /dev/mem opened. [2025-09-23 18:12:44.286] Memory mapped at address 0xffff86af6000. [2025-09-23 18:12:44.286] Read at address 0x00600018 (0xffff86af6018): 0x00000000 [2025-09-23 18:12:44.286] Write at address 0x00600018 (0xffff86af6018): 0x00400040, readback 0x00400040 [2025-09-23 18:12:44.286] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:12:44.350] Loaded PowerVR consumer services. [2025-09-23 18:12:44.542] Waiting data available... [2025-09-23 18:12:44.574] 512+0 records in [2025-09-23 18:12:44.574] 512+0 records out [2025-09-23 18:12:44.621] Starting syslogd/klogd: done [2025-09-23 18:12:44.637] DML Start [2025-09-23 18:12:44.829] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:12:45.053] DML res1: 0 [2025-09-23 18:12:45.451] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:12:45.451] Read Success [2025-09-23 18:12:45.451] Verifying certificate... [2025-09-23 18:12:45.691] Verified OK [2025-09-23 18:12:45.707] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:12:47.423] Verified OK [2025-09-23 18:12:47.423] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:12:47.978] Verified OK [2025-09-23 18:12:47.978] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:12:50.407] fs.protected_hardlinks = 1 [2025-09-23 18:12:50.423] fs.protected_symlinks = 1 [2025-09-23 18:12:50.423] kernel.modules_disabled = 1 [2025-09-23 18:12:50.631] [2025-09-23 18:12:50.631] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:12:52.082] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:12:59.776] SBL1:1210.0.1.0 [2025-09-23 18:12:59.808] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:13:01.391] SBL2:1210.0.1.0 [2025-09-23 18:13:01.439] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:13:01.535] j-A [2025-09-23 18:13:08.890] The R5 Autosar Classic is running [2025-09-23 18:13:08.911] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:13:08.911] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:13:09.518] INIT: version 2.96 booting [2025-09-23 18:13:09.630] INIT: Entering runlevel: 5 [2025-09-23 18:13:09.791] mtd28 attached [2025-09-23 18:13:09.791] mtd24 attached [2025-09-23 18:13:09.807] mtd32 attached [2025-09-23 18:13:09.855] RTNETLINK answers: File exists [2025-09-23 18:13:09.855] ubi0:animations is mounted. [2025-09-23 18:13:09.930] ubi2:dml_code is mounted. [2025-09-23 18:13:09.930] ubi1:textures is mounted. [2025-09-23 18:13:09.930] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:13:09.930] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:13:09.930] data.LB_FadeInType0=100 [2025-09-23 18:13:09.930] data.CHLH_FadeInType0=0 [2025-09-23 18:13:09.930] data.WU_FadeInDelay=0 [2025-09-23 18:13:09.930] max_time_out=0 [2025-09-23 18:13:09.930] No splash screen [2025-09-23 18:13:09.930] stop dss Done [2025-09-23 18:13:09.930] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:13:09.930] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:13:09.930] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:13:09.985] /dev/mem opened. [2025-09-23 18:13:09.985] Memory mapped at address 0xffff948eb000. [2025-09-23 18:13:09.985] Read at address 0x00600018 (0xffff948eb018): 0x00000000 [2025-09-23 18:13:09.985] Write at address 0x00600018 (0xffff948eb018): 0x00400040, readback 0x00400040 [2025-09-23 18:13:10.033] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:13:10.049] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:13:10.225] Loaded PowerVR consumer services. [2025-09-23 18:13:10.305] Waiting data available... [2025-09-23 18:13:10.337] 512+0 records in [2025-09-23 18:13:10.337] 512+0 records out [2025-09-23 18:13:10.353] Starting syslogd/klogd: done [2025-09-23 18:13:10.369] DML Start [2025-09-23 18:13:10.561] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:13:10.801] DML res1: 0 [2025-09-23 18:13:11.145] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:13:11.145] Read Success [2025-09-23 18:13:11.145] Verifying certificate... [2025-09-23 18:13:11.368] Verified OK [2025-09-23 18:13:11.368] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:13:13.068] Verified OK [2025-09-23 18:13:13.068] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:13:13.731] Verified OK [2025-09-23 18:13:13.731] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:13:16.418] fs.protected_hardlinks = 1 [2025-09-23 18:13:16.433] fs.protected_symlinks = 1 [2025-09-23 18:13:16.433] kernel.modules_disabled = 1 [2025-09-23 18:13:16.641] [2025-09-23 18:13:16.641] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:13:17.823] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:13:25.476] SBL1:1210.0.1.0 [2025-09-23 18:13:25.523] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:13:27.090] SBL2:1210.0.1.0 [2025-09-23 18:13:27.137] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:13:27.234] j-A [2025-09-23 18:13:34.589] The R5 Autosar Classic is running [2025-09-23 18:13:34.612] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:13:34.612] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:13:35.219] INIT: version 2.96 booting [2025-09-23 18:13:35.332] INIT: Entering runlevel: 5 [2025-09-23 18:13:35.492] mtd32 attached [2025-09-23 18:13:35.492] mtd24 attached [2025-09-23 18:13:35.507] mtd28 attached [2025-09-23 18:13:35.555] RTNETLINK answers: File exists [2025-09-23 18:13:35.621] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:13:35.621] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:13:35.621] ubi1:textures is mounted. [2025-09-23 18:13:35.621] ubi2:animations is mounted. [2025-09-23 18:13:35.621] ubi0:dml_code is mounted. [2025-09-23 18:13:35.621] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:13:35.621] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:13:35.621] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:13:35.621] data.LB_FadeInType0=100 [2025-09-23 18:13:35.621] data.CHLH_FadeInType0=0 [2025-09-23 18:13:35.621] data.WU_FadeInDelay=0 [2025-09-23 18:13:35.621] max_time_out=0 [2025-09-23 18:13:35.621] No splash screen [2025-09-23 18:13:35.621] stop dss Done [2025-09-23 18:13:35.653] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:13:35.687] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:13:35.687] /dev/mem opened. [2025-09-23 18:13:35.687] Memory mapped at address 0xffffbf3b1000. [2025-09-23 18:13:35.687] Read at address 0x00600018 (0xffffbf3b1018): 0x00000000 [2025-09-23 18:13:35.687] Write at address 0x00600018 (0xffffbf3b1018): 0x00400040, readback 0x00400040 [2025-09-23 18:13:35.816] Loaded PowerVR consumer services. [2025-09-23 18:13:35.975] Waiting data available... [2025-09-23 18:13:36.007] 512+0 records in [2025-09-23 18:13:36.007] 512+0 records out [2025-09-23 18:13:36.055] Starting syslogd/klogd: done [2025-09-23 18:13:36.071] DML Start [2025-09-23 18:13:36.215] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:13:36.407] DML res1: 0 [2025-09-23 18:13:36.925] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:13:36.925] Read Success [2025-09-23 18:13:36.925] Verifying certificate... [2025-09-23 18:13:37.181] Verified OK [2025-09-23 18:13:37.197] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:13:38.916] Verified OK [2025-09-23 18:13:38.916] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:13:39.537] Verified OK [2025-09-23 18:13:39.537] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:13:42.046] fs.protected_hardlinks = 1 [2025-09-23 18:13:42.062] fs.protected_symlinks = 1 [2025-09-23 18:13:42.078] kernel.modules_disabled = 1 [2025-09-23 18:13:42.271] [2025-09-23 18:13:42.271] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:13:43.468] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:13:51.183] SBL1:1210.0.1.0 [2025-09-23 18:13:51.231] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:13:52.799] SBL2:1210.0.1.0 [2025-09-23 18:13:52.846] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:13:52.942] j-A [2025-09-23 18:14:00.298] The R5 Autosar Classic is running [2025-09-23 18:14:00.322] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:14:00.322] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:14:00.930] INIT: version 2.96 booting [2025-09-23 18:14:01.041] INIT: Entering runlevel: 5 [2025-09-23 18:14:01.202] mtd24 attached [2025-09-23 18:14:01.218] mtd32 attached [2025-09-23 18:14:01.218] mtd28 attached [2025-09-23 18:14:01.250] ubi0:textures is mounted. [2025-09-23 18:14:01.282] RTNETLINK answers: File exists [2025-09-23 18:14:01.282] ubi2:animations is mounted. [2025-09-23 18:14:01.312] ubi1:dml_code is mounted. [2025-09-23 18:14:01.312] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:14:01.312] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:14:01.312] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:14:01.312] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:14:01.339] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:14:01.339] data.LB_FadeInType0=100 [2025-09-23 18:14:01.339] data.CHLH_FadeInType0=0 [2025-09-23 18:14:01.339] data.WU_FadeInDelay=0 [2025-09-23 18:14:01.339] max_time_out=0 [2025-09-23 18:14:01.339] No splash screen [2025-09-23 18:14:01.339] stop dss Done [2025-09-23 18:14:01.387] /dev/mem opened. [2025-09-23 18:14:01.387] Memory mapped at address 0xffff97d87000. [2025-09-23 18:14:01.413] Read at address 0x00600018 (0xffff97d87018): 0x00000000 [2025-09-23 18:14:01.413] Write at address 0x00600018 (0xffff97d87018): 0x00400040, readback 0x00400040 [2025-09-23 18:14:01.429] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:14:01.461] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:14:01.525] Loaded PowerVR consumer services. [2025-09-23 18:14:01.669] Waiting data available... [2025-09-23 18:14:01.701] 512+0 records in [2025-09-23 18:14:01.701] 512+0 records out [2025-09-23 18:14:01.733] Starting syslogd/klogd: done [2025-09-23 18:14:01.749] DML Start [2025-09-23 18:14:01.941] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:14:02.164] DML res1: 0 [2025-09-23 18:14:02.574] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:14:02.574] Read Success [2025-09-23 18:14:02.574] Verifying certificate... [2025-09-23 18:14:02.798] Verified OK [2025-09-23 18:14:02.813] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:14:04.301] Verified OK [2025-09-23 18:14:04.301] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:14:04.946] Verified OK [2025-09-23 18:14:04.946] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:14:07.680] fs.protected_hardlinks = 1 [2025-09-23 18:14:07.707] fs.protected_symlinks = 1 [2025-09-23 18:14:07.707] kernel.modules_disabled = 1 [2025-09-23 18:14:07.883] [2025-09-23 18:14:07.883] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:14:09.162] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:14:16.875] SBL1:1210.0.1.0 [2025-09-23 18:14:16.923] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:14:18.489] SBL2:1210.0.1.0 [2025-09-23 18:14:18.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:14:18.634] j-A [2025-09-23 18:14:25.988] The R5 Autosar Classic is running [2025-09-23 18:14:26.011] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:14:26.011] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:14:26.620] INIT: version 2.96 booting [2025-09-23 18:14:26.732] INIT: Entering runlevel: 5 [2025-09-23 18:14:26.892] mtd32 attached [2025-09-23 18:14:26.892] mtd28 attached [2025-09-23 18:14:26.908] mtd24 attached [2025-09-23 18:14:26.939] ubi0:dml_code is mounted. [2025-09-23 18:14:26.955] RTNETLINK answers: File exists [2025-09-23 18:14:26.955] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:14:26.993] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:14:26.993] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:14:26.993] ubi1:animations is mounted. [2025-09-23 18:14:26.993] ubi2:textures is mounted. [2025-09-23 18:14:26.993] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:14:26.993] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:14:27.016] data.LB_FadeInType0=100 [2025-09-23 18:14:27.016] data.CHLH_FadeInType0=0 [2025-09-23 18:14:27.016] data.WU_FadeInDelay=0 [2025-09-23 18:14:27.016] max_time_out=0 [2025-09-23 18:14:27.016] No splash screen [2025-09-23 18:14:27.016] stop dss Done [2025-09-23 18:14:27.032] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:14:27.032] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:14:27.089] /dev/mem opened. [2025-09-23 18:14:27.089] Memory mapped at address 0xffff81332000. [2025-09-23 18:14:27.089] Read at address 0x00600018 (0xffff81332018): 0x00000000 [2025-09-23 18:14:27.089] Write at address 0x00600018 (0xffff81332018): 0x00400040, readback 0x00400040 [2025-09-23 18:14:27.186] Loaded PowerVR consumer services. [2025-09-23 18:14:27.361] Waiting data available... [2025-09-23 18:14:27.393] 512+0 records in [2025-09-23 18:14:27.393] 512+0 records out [2025-09-23 18:14:27.441] Starting syslogd/klogd: done [2025-09-23 18:14:27.457] DML Start [2025-09-23 18:14:27.649] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:14:27.873] DML res1: 0 [2025-09-23 18:14:28.241] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:14:28.261] Read Success [2025-09-23 18:14:28.261] Verifying certificate... [2025-09-23 18:14:28.549] Verified OK [2025-09-23 18:14:28.565] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:14:30.079] Verified OK [2025-09-23 18:14:30.079] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:14:30.703] Verified OK [2025-09-23 18:14:30.703] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:14:33.373] fs.protected_hardlinks = 1 [2025-09-23 18:14:33.373] fs.protected_symlinks = 1 [2025-09-23 18:14:33.389] kernel.modules_disabled = 1 [2025-09-23 18:14:33.580] [2025-09-23 18:14:33.580] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:14:34.867] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:14:42.575] SBL1:1210.0.1.0 [2025-09-23 18:14:42.623] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:14:44.206] SBL2:1210.0.1.0 [2025-09-23 18:14:44.238] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:14:44.349] j-A [2025-09-23 18:14:51.724] The R5 Autosar Classic is running [2025-09-23 18:14:51.724] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:14:51.724] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:14:52.331] INIT: version 2.96 booting [2025-09-23 18:14:52.443] INIT: Entering runlevel: 5 [2025-09-23 18:14:52.603] mtd28 attached [2025-09-23 18:14:52.619] mtd24 attached [2025-09-23 18:14:52.635] mtd32 attached [2025-09-23 18:14:52.667] RTNETLINK answers: File exists [2025-09-23 18:14:52.716] ubi0:animations is mounted. [2025-09-23 18:14:52.716] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:14:52.716] ubi1:textures is mounted. [2025-09-23 18:14:52.716] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:14:52.716] ubi2:dml_code is mounted. [2025-09-23 18:14:52.716] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:14:52.716] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:14:52.716] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:14:52.740] data.LB_FadeInType0=100 [2025-09-23 18:14:52.740] data.CHLH_FadeInType0=0 [2025-09-23 18:14:52.740] data.WU_FadeInDelay=0 [2025-09-23 18:14:52.740] max_time_out=0 [2025-09-23 18:14:52.740] No splash screen [2025-09-23 18:14:52.740] stop dss Done [2025-09-23 18:14:52.788] /dev/mem opened. [2025-09-23 18:14:52.788] Memory mapped at address 0xffff91da7000. [2025-09-23 18:14:52.825] Read at address 0x00600018 (0xffff91da7018): 0x00000000 [2025-09-23 18:14:52.825] Write at address 0x00600018 (0xffff91da7018): 0x00400040, readback 0x00400040 [2025-09-23 18:14:52.825] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:14:52.825] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:14:53.033] Loaded PowerVR consumer services. [2025-09-23 18:14:53.096] Waiting data available... [2025-09-23 18:14:53.112] 512+0 records in [2025-09-23 18:14:53.112] 512+0 records out [2025-09-23 18:14:53.160] Starting syslogd/klogd: done [2025-09-23 18:14:53.176] DML Start [2025-09-23 18:14:53.352] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:14:53.527] DML res1: 0 [2025-09-23 18:14:54.013] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:14:54.013] Read Success [2025-09-23 18:14:54.013] Verifying certificate... [2025-09-23 18:14:54.253] Verified OK [2025-09-23 18:14:54.284] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:14:55.962] Verified OK [2025-09-23 18:14:55.962] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:14:56.537] Verified OK [2025-09-23 18:14:56.558] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:14:59.084] fs.protected_hardlinks = 1 [2025-09-23 18:14:59.100] fs.protected_symlinks = 1 [2025-09-23 18:14:59.100] kernel.modules_disabled = 1 [2025-09-23 18:14:59.308] [2025-09-23 18:14:59.308] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:15:00.595] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:15:08.277] SBL1:1210.0.1.0 [2025-09-23 18:15:08.325] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:15:09.891] SBL2:1210.0.1.0 [2025-09-23 18:15:09.939] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:15:10.051] j-A [2025-09-23 18:15:17.423] The R5 Autosar Classic is running [2025-09-23 18:15:17.423] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:15:17.423] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:15:18.030] INIT: version 2.96 booting [2025-09-23 18:15:18.142] INIT: Entering runlevel: 5 [2025-09-23 18:15:18.286] mtd24 attached [2025-09-23 18:15:18.302] mtd32 attached [2025-09-23 18:15:18.302] mtd28 attached [2025-09-23 18:15:18.334] ubi0:textures is mounted. [2025-09-23 18:15:18.350] RTNETLINK answers: File exists [2025-09-23 18:15:18.395] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:15:18.395] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:15:18.395] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:15:18.395] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:15:18.395] ubi2:animations is mounted. [2025-09-23 18:15:18.395] ubi1:dml_code is mounted. [2025-09-23 18:15:18.395] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:15:18.411] data.LB_FadeInType0=100 [2025-09-23 18:15:18.452] data.CHLH_FadeInType0=0 [2025-09-23 18:15:18.452] data.WU_FadeInDelay=0 [2025-09-23 18:15:18.452] max_time_out=0 [2025-09-23 18:15:18.452] No splash screen [2025-09-23 18:15:18.452] stop dss Done [2025-09-23 18:15:18.452] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:15:18.452] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:15:18.505] /dev/mem opened. [2025-09-23 18:15:18.505] Memory mapped at address 0xffffbe384000. [2025-09-23 18:15:18.505] Read at address 0x00600018 (0xffffbe384018): 0x00000000 [2025-09-23 18:15:18.505] Write at address 0x00600018 (0xffffbe384018): 0x00400040, readback 0x00400040 [2025-09-23 18:15:18.665] Loaded PowerVR consumer services. [2025-09-23 18:15:18.793] Waiting data available... [2025-09-23 18:15:18.824] 512+0 records in [2025-09-23 18:15:18.824] 512+0 records out [2025-09-23 18:15:18.856] Starting syslogd/klogd: done [2025-09-23 18:15:18.872] DML Start [2025-09-23 18:15:19.049] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:15:19.256] DML res1: 0 [2025-09-23 18:15:19.701] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:15:19.701] Read Success [2025-09-23 18:15:19.701] Verifying certificate... [2025-09-23 18:15:19.958] Verified OK [2025-09-23 18:15:19.974] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:15:21.697] Verified OK [2025-09-23 18:15:21.697] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:15:22.249] Verified OK [2025-09-23 18:15:22.249] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:15:24.791] fs.protected_hardlinks = 1 [2025-09-23 18:15:24.807] fs.protected_symlinks = 1 [2025-09-23 18:15:24.807] kernel.modules_disabled = 1 [2025-09-23 18:15:25.000] [2025-09-23 18:15:25.000] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:15:26.300] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:15:34.003] SBL1:1210.0.1.0 [2025-09-23 18:15:34.035] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:15:35.618] SBL2:1210.0.1.0 [2025-09-23 18:15:35.666] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:15:35.761] j-A [2025-09-23 18:15:43.117] The R5 Autosar Classic is running [2025-09-23 18:15:43.138] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:15:43.138] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:15:43.746] INIT: version 2.96 booting [2025-09-23 18:15:43.857] INIT: Entering runlevel: 5 [2025-09-23 18:15:44.017] mtd28 attached [2025-09-23 18:15:44.033] mtd32 attached [2025-09-23 18:15:44.033] mtd24 attached [2025-09-23 18:15:44.081] ubi0:animations is mounted. [2025-09-23 18:15:44.148] RTNETLINK answers: File exists [2025-09-23 18:15:44.148] ubi2:textures is mounted. [2025-09-23 18:15:44.148] ubi1:dml_code is mounted. [2025-09-23 18:15:44.148] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:15:44.148] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:15:44.148] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:15:44.148] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:15:44.148] data.LB_FadeInType0=100 [2025-09-23 18:15:44.148] data.CHLH_FadeInType0=0 [2025-09-23 18:15:44.148] data.WU_FadeInDelay=0 [2025-09-23 18:15:44.148] max_time_out=0 [2025-09-23 18:15:44.148] No splash screen [2025-09-23 18:15:44.148] stop dss Done [2025-09-23 18:15:44.148] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:15:44.208] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:15:44.208] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:15:44.208] /dev/mem opened. [2025-09-23 18:15:44.208] Memory mapped at address 0xffffa294d000. [2025-09-23 18:15:44.208] Read at address 0x00600018 (0xffffa294d018): 0x00000000 [2025-09-23 18:15:44.208] Write at address 0x00600018 (0xffffa294d018): 0x00400040, readback 0x00400040 [2025-09-23 18:15:44.289] Loaded PowerVR consumer services. [2025-09-23 18:15:44.497] Waiting data available... [2025-09-23 18:15:44.529] 512+0 records in [2025-09-23 18:15:44.529] 512+0 records out [2025-09-23 18:15:44.577] Starting syslogd/klogd: done [2025-09-23 18:15:44.593] DML Start [2025-09-23 18:15:44.736] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:15:45.008] DML res1: 0 [2025-09-23 18:15:45.413] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:15:45.413] Read Success [2025-09-23 18:15:45.413] Verifying certificate... [2025-09-23 18:15:45.637] Verified OK [2025-09-23 18:15:45.653] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:15:47.360] Verified OK [2025-09-23 18:15:47.360] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:15:47.900] Verified OK [2025-09-23 18:15:47.900] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:15:50.379] fs.protected_hardlinks = 1 [2025-09-23 18:15:50.395] fs.protected_symlinks = 1 [2025-09-23 18:15:50.395] kernel.modules_disabled = 1 [2025-09-23 18:15:50.602] [2025-09-23 18:15:50.602] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:15:52.098] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:15:59.725] SBL1:1210.0.1.0 [2025-09-23 18:15:59.757] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:16:01.340] SBL2:1210.0.1.0 [2025-09-23 18:16:01.372] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:16:01.485] j-A [2025-09-23 18:16:08.858] The R5 Autosar Classic is running [2025-09-23 18:16:08.858] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:16:08.858] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:16:09.465] INIT: version 2.96 booting [2025-09-23 18:16:09.578] INIT: Entering runlevel: 5 [2025-09-23 18:16:09.721] mtd24 attached [2025-09-23 18:16:09.737] mtd32 attached [2025-09-23 18:16:09.753] mtd28 attached [2025-09-23 18:16:09.858] ubi0:textures is mounted. [2025-09-23 18:16:09.858] RTNETLINK answers: File exists [2025-09-23 18:16:09.858] ubi2:animations is mounted. [2025-09-23 18:16:09.858] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:16:09.858] ubi1:dml_code is mounted. [2025-09-23 18:16:09.858] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:16:09.858] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:16:09.858] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:16:09.858] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:16:09.858] data.LB_FadeInType0=100 [2025-09-23 18:16:09.858] data.CHLH_FadeInType0=0 [2025-09-23 18:16:09.858] data.WU_FadeInDelay=0 [2025-09-23 18:16:09.858] max_time_out=0 [2025-09-23 18:16:09.858] No splash screen [2025-09-23 18:16:09.858] stop dss Done [2025-09-23 18:16:09.890] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:16:09.906] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:16:09.941] /dev/mem opened. [2025-09-23 18:16:09.941] Memory mapped at address 0xffffb1cea000. [2025-09-23 18:16:09.941] Read at address 0x00600018 (0xffffb1cea018): 0x00000000 [2025-09-23 18:16:09.941] Write at address 0x00600018 (0xffffb1cea018): 0x00400040, readback 0x00400040 [2025-09-23 18:16:10.037] Loaded PowerVR consumer services. [2025-09-23 18:16:10.212] Waiting data available... [2025-09-23 18:16:10.228] 512+0 records in [2025-09-23 18:16:10.244] 512+0 records out [2025-09-23 18:16:10.277] Starting syslogd/klogd: done [2025-09-23 18:16:10.293] DML Start [2025-09-23 18:16:10.468] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:16:10.660] DML res1: 0 [2025-09-23 18:16:11.153] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:16:11.153] Read Success [2025-09-23 18:16:11.153] Verifying certificate... [2025-09-23 18:16:11.393] Verified OK [2025-09-23 18:16:11.408] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:16:12.960] Verified OK [2025-09-23 18:16:12.960] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:16:13.609] Verified OK [2025-09-23 18:16:13.609] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:16:16.359] fs.protected_hardlinks = 1 [2025-09-23 18:16:16.359] fs.protected_symlinks = 1 [2025-09-23 18:16:16.375] kernel.modules_disabled = 1 [2025-09-23 18:16:16.567] [2025-09-23 18:16:16.567] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:16:17.715] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:16:25.438] SBL1:1210.0.1.0 [2025-09-23 18:16:25.486] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:16:27.052] SBL2:1210.0.1.0 [2025-09-23 18:16:27.100] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:16:27.212] j-A [2025-09-23 18:16:34.551] The R5 Autosar Classic is running [2025-09-23 18:16:34.582] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:16:34.582] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:16:35.190] INIT: version 2.96 booting [2025-09-23 18:16:35.301] INIT: Entering runlevel: 5 [2025-09-23 18:16:35.461] mtd28 attached [2025-09-23 18:16:35.461] mtd24 attached [2025-09-23 18:16:35.477] mtd32 attached [2025-09-23 18:16:35.525] ubi0:animations is mounted. [2025-09-23 18:16:35.525] ubi1:textures is mounted. [2025-09-23 18:16:35.586] RTNETLINK answers: File exists [2025-09-23 18:16:35.586] ubi2:dml_code is mounted. [2025-09-23 18:16:35.586] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:16:35.586] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:16:35.586] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:16:35.586] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:16:35.586] data.LB_FadeInType0=100 [2025-09-23 18:16:35.586] data.CHLH_FadeInType0=0 [2025-09-23 18:16:35.586] data.WU_FadeInDelay=0 [2025-09-23 18:16:35.586] max_time_out=0 [2025-09-23 18:16:35.586] No splash screen [2025-09-23 18:16:35.586] stop dss Done [2025-09-23 18:16:35.586] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:16:35.618] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:16:35.659] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:16:35.659] /dev/mem opened. [2025-09-23 18:16:35.659] Memory mapped at address 0xffff90565000. [2025-09-23 18:16:35.659] Read at address 0x00600018 (0xffff90565018): 0x00000000 [2025-09-23 18:16:35.659] Write at address 0x00600018 (0xffff90565018): 0x00400040, readback 0x00400040 [2025-09-23 18:16:35.867] Loaded PowerVR consumer services. [2025-09-23 18:16:35.963] Waiting data available... [2025-09-23 18:16:35.995] 512+0 records in [2025-09-23 18:16:35.995] 512+0 records out [2025-09-23 18:16:36.026] Starting syslogd/klogd: done [2025-09-23 18:16:36.042] DML Start [2025-09-23 18:16:36.219] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:16:36.442] DML res1: 0 [2025-09-23 18:16:36.906] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:16:36.927] Read Success [2025-09-23 18:16:36.927] Verifying certificate... [2025-09-23 18:16:37.183] Verified OK [2025-09-23 18:16:37.199] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:16:38.831] Verified OK [2025-09-23 18:16:38.831] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:16:39.491] Verified OK [2025-09-23 18:16:39.491] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:16:42.110] fs.protected_hardlinks = 1 [2025-09-23 18:16:42.110] fs.protected_symlinks = 1 [2025-09-23 18:16:42.110] kernel.modules_disabled = 1 [2025-09-23 18:16:42.302] [2025-09-23 18:16:42.302] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:16:43.469] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:16:51.154] SBL1:1210.0.1.0 [2025-09-23 18:16:51.202] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:16:52.769] SBL2:1210.0.1.0 [2025-09-23 18:16:52.818] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:16:52.929] j-A [2025-09-23 18:17:00.268] The R5 Autosar Classic is running [2025-09-23 18:17:00.299] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:17:00.299] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:17:00.906] INIT: version 2.96 booting [2025-09-23 18:17:01.018] INIT: Entering runlevel: 5 [2025-09-23 18:17:01.179] mtd24 attached [2025-09-23 18:17:01.179] mtd28 attached [2025-09-23 18:17:01.195] mtd32 attached [2025-09-23 18:17:01.243] RTNETLINK answers: File exists [2025-09-23 18:17:01.310] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:17:01.310] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:17:01.310] ubi0:textures is mounted. [2025-09-23 18:17:01.310] ubi1:animations is mounted. [2025-09-23 18:17:01.310] ubi2:dml_code is mounted. [2025-09-23 18:17:01.310] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:17:01.310] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:17:01.310] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:17:01.310] data.LB_FadeInType0=100 [2025-09-23 18:17:01.310] data.CHLH_FadeInType0=0 [2025-09-23 18:17:01.310] data.WU_FadeInDelay=0 [2025-09-23 18:17:01.310] max_time_out=0 [2025-09-23 18:17:01.310] No splash screen [2025-09-23 18:17:01.310] stop dss Done [2025-09-23 18:17:01.402] /dev/mem opened. [2025-09-23 18:17:01.402] Memory mapped at address 0xffff943ac000. [2025-09-23 18:17:01.402] Read at address 0x00600018 (0xffff943ac018): 0x00000000 [2025-09-23 18:17:01.402] Write at address 0x00600018 (0xffff943ac018): 0x00400040, readback 0x00400040 [2025-09-23 18:17:01.402] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:17:01.402] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:17:01.626] Loaded PowerVR consumer services. [2025-09-23 18:17:01.706] Waiting data available... [2025-09-23 18:17:01.738] 512+0 records in [2025-09-23 18:17:01.738] 512+0 records out [2025-09-23 18:17:01.753] Starting syslogd/klogd: done [2025-09-23 18:17:01.769] DML Start [2025-09-23 18:17:01.929] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:17:02.153] DML res1: 0 [2025-09-23 18:17:02.612] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:17:02.612] Read Success [2025-09-23 18:17:02.612] Verifying certificate... [2025-09-23 18:17:02.836] Verified OK [2025-09-23 18:17:02.868] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:17:04.609] Verified OK [2025-09-23 18:17:04.609] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:17:05.197] Verified OK [2025-09-23 18:17:05.197] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:17:05.884] 5509 GC [0] [2025-09-23 18:17:05.964] 5581 GC [1] [2025-09-23 18:17:06.028] 5649 GC [2] [2025-09-23 18:17:06.108] 5722 GC [3] [2025-09-23 18:17:06.172] 5798 GC [4] [2025-09-23 18:17:06.252] 5870 GC [5] [2025-09-23 18:17:06.316] 5939 GC [6] [2025-09-23 18:17:06.396] 6011 GC [7] [2025-09-23 18:17:06.459] 6088 GC [8] [2025-09-23 18:17:06.540] 6151 GC [9] [2025-09-23 18:17:06.604] 6229 GC [10] [2025-09-23 18:17:06.667] 6290 GC [11] [2025-09-23 18:17:06.731] 6349 GC [12] [2025-09-23 18:17:06.795] 6410 GC [13] [2025-09-23 18:17:06.859] 6469 GC [14] [2025-09-23 18:17:06.907] 6533 GC [15] [2025-09-23 18:17:06.972] 6590 GC [16] [2025-09-23 18:17:07.036] 6652 GC [17] [2025-09-23 18:17:07.083] 6709 GC [18] [2025-09-23 18:17:07.147] 6772 GC [19] [2025-09-23 18:17:07.212] 6830 GC [20] [2025-09-23 18:17:07.275] 6891 GC [21] [2025-09-23 18:17:07.323] 6950 GC [22] [2025-09-23 18:17:07.387] 7011 GC [23] [2025-09-23 18:17:07.435] 7063 GC [24] [2025-09-23 18:17:07.499] 7130 GC [25] [2025-09-23 18:17:07.563] 7181 GC [26] [2025-09-23 18:17:07.627] 7251 GC [27] [2025-09-23 18:17:07.707] 7312 GC [28] [2025-09-23 18:17:07.707] 7327 GC [29] [2025-09-23 18:17:07.738] fs.protected_hardlinks = 1 [2025-09-23 18:17:07.738] fs.protected_symlinks = 1 [2025-09-23 18:17:07.754] kernel.modules_disabled = 1 [2025-09-23 18:17:07.787] GC DONE [2025-09-23 18:17:07.947] [2025-09-23 18:17:07.947] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:17:09.140] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:17:16.849] SBL1:1210.0.1.0 [2025-09-23 18:17:16.898] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:17:18.464] SBL2:1210.0.1.0 [2025-09-23 18:17:18.512] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:17:18.608] j-A [2025-09-23 18:17:25.963] The R5 Autosar Classic is running [2025-09-23 18:17:25.984] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:17:25.984] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:17:26.592] INIT: version 2.96 booting [2025-09-23 18:17:26.704] INIT: Entering runlevel: 5 [2025-09-23 18:17:26.863] mtd24 attached [2025-09-23 18:17:26.879] mtd28 attached [2025-09-23 18:17:26.879] mtd32 attached [2025-09-23 18:17:26.997] RTNETLINK answers: File exists [2025-09-23 18:17:26.997] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:17:26.997] ubi0:textures is mounted. [2025-09-23 18:17:26.997] ubi1:animations is mounted. [2025-09-23 18:17:26.997] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:17:26.997] ubi2:dml_code is mounted. [2025-09-23 18:17:26.997] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:17:26.997] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:17:26.997] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:17:26.997] data.LB_FadeInType0=100 [2025-09-23 18:17:26.997] data.CHLH_FadeInType0=0 [2025-09-23 18:17:26.997] data.WU_FadeInDelay=0 [2025-09-23 18:17:26.997] max_time_out=0 [2025-09-23 18:17:26.997] No splash screen [2025-09-23 18:17:26.997] stop dss Done [2025-09-23 18:17:27.070] /dev/mem opened. [2025-09-23 18:17:27.070] Memory mapped at address 0xffff81bb0000. [2025-09-23 18:17:27.070] Read at address 0x00600018 (0xffff81bb0018): 0x00000000 [2025-09-23 18:17:27.070] Write at address 0x00600018 (0xffff81bb0018): 0x00400040, readback 0x00400040 [2025-09-23 18:17:27.070] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:17:27.086] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:17:27.199] Loaded PowerVR consumer services. [2025-09-23 18:17:27.316] Waiting data available... [2025-09-23 18:17:27.316] 512+0 records in [2025-09-23 18:17:27.316] 512+0 records out [2025-09-23 18:17:27.348] Starting syslogd/klogd: done [2025-09-23 18:17:27.364] DML Start [2025-09-23 18:17:27.572] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:17:27.812] DML res1: 0 [2025-09-23 18:17:28.205] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:17:28.205] Read Success [2025-09-23 18:17:28.205] Verifying certificate... [2025-09-23 18:17:28.461] Verified OK [2025-09-23 18:17:28.477] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:17:30.059] Verified OK [2025-09-23 18:17:30.059] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:17:30.650] Verified OK [2025-09-23 18:17:30.650] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:17:33.480] fs.protected_hardlinks = 1 [2025-09-23 18:17:33.480] fs.protected_symlinks = 1 [2025-09-23 18:17:33.496] kernel.modules_disabled = 1 [2025-09-23 18:17:33.688] [2025-09-23 18:17:33.688] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:17:34.884] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:17:42.554] SBL1:1210.0.1.0 [2025-09-23 18:17:42.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:17:44.169] SBL2:1210.0.1.0 [2025-09-23 18:17:44.201] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:17:44.313] j-A [2025-09-23 18:17:51.683] The R5 Autosar Classic is running [2025-09-23 18:17:51.683] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:17:51.683] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:17:52.291] INIT: version 2.96 booting [2025-09-23 18:17:52.403] INIT: Entering runlevel: 5 [2025-09-23 18:17:52.563] mtd28 attached [2025-09-23 18:17:52.563] mtd32 attached [2025-09-23 18:17:52.579] mtd24 attached [2025-09-23 18:17:52.659] RTNETLINK answers: File exists [2025-09-23 18:17:52.659] ubi1:dml_code is mounted. [2025-09-23 18:17:52.659] ubi0:animations is mounted. [2025-09-23 18:17:52.659] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:17:52.659] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:17:52.659] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:17:52.659] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:17:52.659] ubi2:textures is mounted. [2025-09-23 18:17:52.659] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:17:52.689] data.LB_FadeInType0=100 [2025-09-23 18:17:52.689] data.CHLH_FadeInType0=0 [2025-09-23 18:17:52.689] data.WU_FadeInDelay=0 [2025-09-23 18:17:52.689] max_time_out=0 [2025-09-23 18:17:52.689] No splash screen [2025-09-23 18:17:52.689] stop dss Done [2025-09-23 18:17:52.715] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:17:52.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:17:52.731] /dev/mem opened. [2025-09-23 18:17:52.731] Memory mapped at address 0xffffb2294000. [2025-09-23 18:17:52.757] Read at address 0x00600018 (0xffffb2294018): 0x00000000 [2025-09-23 18:17:52.757] Write at address 0x00600018 (0xffffb2294018): 0x00400040, readback 0x00400040 [2025-09-23 18:17:52.870] Loaded PowerVR consumer services. [2025-09-23 18:17:53.009] Waiting data available... [2025-09-23 18:17:53.009] 512+0 records in [2025-09-23 18:17:53.009] 512+0 records out [2025-09-23 18:17:53.041] Starting syslogd/klogd: done [2025-09-23 18:17:53.057] DML Start [2025-09-23 18:17:53.216] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:17:53.440] DML res1: 0 [2025-09-23 18:17:53.952] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:17:53.968] Read Success [2025-09-23 18:17:53.968] Verifying certificate... [2025-09-23 18:17:54.240] Verified OK [2025-09-23 18:17:54.256] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:17:55.923] Verified OK [2025-09-23 18:17:55.923] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:17:56.543] Verified OK [2025-09-23 18:17:56.543] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:17:59.070] fs.protected_hardlinks = 1 [2025-09-23 18:17:59.098] fs.protected_symlinks = 1 [2025-09-23 18:17:59.098] kernel.modules_disabled = 1 [2025-09-23 18:17:59.274] [2025-09-23 18:17:59.274] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:18:00.556] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:18:08.273] SBL1:1210.0.1.0 [2025-09-23 18:18:08.304] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:18:09.888] SBL2:1210.0.1.0 [2025-09-23 18:18:09.919] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:18:10.015] j-A [2025-09-23 18:18:17.371] The R5 Autosar Classic is running [2025-09-23 18:18:17.395] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:18:17.395] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:18:18.002] INIT: version 2.96 booting [2025-09-23 18:18:18.114] INIT: Entering runlevel: 5 [2025-09-23 18:18:18.274] mtd32 attached [2025-09-23 18:18:18.274] mtd24 attached [2025-09-23 18:18:18.290] mtd28 attached [2025-09-23 18:18:18.338] ubi0:dml_code is mounted. [2025-09-23 18:18:18.338] RTNETLINK answers: File exists [2025-09-23 18:18:18.378] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:18:18.378] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:18:18.378] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:18:18.378] ubi1:textures is mounted. [2025-09-23 18:18:18.378] ubi2:animations is mounted. [2025-09-23 18:18:18.378] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:18:18.378] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:18:18.394] data.LB_FadeInType0=100 [2025-09-23 18:18:18.394] data.CHLH_FadeInType0=0 [2025-09-23 18:18:18.414] data.WU_FadeInDelay=0 [2025-09-23 18:18:18.414] max_time_out=0 [2025-09-23 18:18:18.414] No splash screen [2025-09-23 18:18:18.414] stop dss Done [2025-09-23 18:18:18.446] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:18:18.446] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:18:18.495] /dev/mem opened. [2025-09-23 18:18:18.495] Memory mapped at address 0xffff82b71000. [2025-09-23 18:18:18.495] Read at address 0x00600018 (0xffff82b71018): 0x00000000 [2025-09-23 18:18:18.495] Write at address 0x00600018 (0xffff82b71018): 0x00400040, readback 0x00400040 [2025-09-23 18:18:18.656] Loaded PowerVR consumer services. [2025-09-23 18:18:18.704] 512+0 records in [2025-09-23 18:18:18.704] 512+0 records out [2025-09-23 18:18:18.736] Waiting data available... [2025-09-23 18:18:18.751] Starting syslogd/klogd: done [2025-09-23 18:18:18.767] DML Start [2025-09-23 18:18:18.991] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:18:19.231] DML res1: 0 [2025-09-23 18:18:19.577] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:18:19.577] Read Success [2025-09-23 18:18:19.577] Verifying certificate... [2025-09-23 18:18:19.897] Verified OK [2025-09-23 18:18:19.913] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:18:21.550] Verified OK [2025-09-23 18:18:21.550] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:18:22.142] Verified OK [2025-09-23 18:18:22.158] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:18:24.860] fs.protected_hardlinks = 1 [2025-09-23 18:18:24.860] fs.protected_symlinks = 1 [2025-09-23 18:18:24.860] kernel.modules_disabled = 1 [2025-09-23 18:18:25.068] [2025-09-23 18:18:25.068] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:18:26.315] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:18:33.969] SBL1:1210.0.1.0 [2025-09-23 18:18:34.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:18:35.584] SBL2:1210.0.1.0 [2025-09-23 18:18:35.616] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:18:35.728] j-A [2025-09-23 18:18:43.099] The R5 Autosar Classic is running [2025-09-23 18:18:43.099] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:18:43.099] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:18:43.706] INIT: version 2.96 booting [2025-09-23 18:18:43.819] INIT: Entering runlevel: 5 [2025-09-23 18:18:43.978] mtd32 attached [2025-09-23 18:18:43.994] mtd28 attached [2025-09-23 18:18:43.994] mtd24 attached [2025-09-23 18:18:44.043] RTNETLINK answers: File exists [2025-09-23 18:18:44.108] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:18:44.108] ubi2:textures is mounted. [2025-09-23 18:18:44.108] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:18:44.108] ubi0:dml_code is mounted. [2025-09-23 18:18:44.108] ubi1:animations is mounted. [2025-09-23 18:18:44.108] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:18:44.108] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:18:44.108] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:18:44.108] data.LB_FadeInType0=100 [2025-09-23 18:18:44.108] data.CHLH_FadeInType0=0 [2025-09-23 18:18:44.108] data.WU_FadeInDelay=0 [2025-09-23 18:18:44.108] max_time_out=0 [2025-09-23 18:18:44.108] No splash screen [2025-09-23 18:18:44.108] stop dss Done [2025-09-23 18:18:44.155] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:18:44.194] /dev/mem opened. [2025-09-23 18:18:44.194] Memory mapped at address 0xffffba12a000. [2025-09-23 18:18:44.194] Read at address 0x00600018 (0xffffba12a018): 0x00000000 [2025-09-23 18:18:44.194] Write at address 0x00600018 (0xffffba12a018): 0x00400040, readback 0x00400040 [2025-09-23 18:18:44.194] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:18:44.258] Loaded PowerVR consumer services. [2025-09-23 18:18:44.386] 512+0 records in [2025-09-23 18:18:44.386] 512+0 records out [2025-09-23 18:18:44.418] Waiting data available... [2025-09-23 18:18:44.450] Starting syslogd/klogd: done [2025-09-23 18:18:44.466] DML Start [2025-09-23 18:18:44.657] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:18:44.865] DML res1: 0 [2025-09-23 18:18:45.360] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:18:45.360] Read Success [2025-09-23 18:18:45.360] Verifying certificate... [2025-09-23 18:18:45.584] Verified OK [2025-09-23 18:18:45.600] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:18:47.113] Verified OK [2025-09-23 18:18:47.113] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:18:47.718] Verified OK [2025-09-23 18:18:47.718] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:18:50.579] fs.protected_hardlinks = 1 [2025-09-23 18:18:50.595] fs.protected_symlinks = 1 [2025-09-23 18:18:50.595] kernel.modules_disabled = 1 [2025-09-23 18:18:50.788] [2025-09-23 18:18:50.788] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:18:51.979] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:18:59.684] SBL1:1210.0.1.0 [2025-09-23 18:18:59.716] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:19:01.299] SBL2:1210.0.1.0 [2025-09-23 18:19:01.331] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:19:01.426] j-A [2025-09-23 18:19:08.783] The R5 Autosar Classic is running [2025-09-23 18:19:08.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:19:08.807] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:19:09.414] INIT: version 2.96 booting [2025-09-23 18:19:09.525] INIT: Entering runlevel: 5 [2025-09-23 18:19:09.670] mtd24 attached [2025-09-23 18:19:09.686] mtd28 attached [2025-09-23 18:19:09.702] mtd32 attached [2025-09-23 18:19:09.787] ubi1:animations is mounted. [2025-09-23 18:19:09.787] RTNETLINK answers: File exists [2025-09-23 18:19:09.787] ubi0:textures is mounted. [2025-09-23 18:19:09.787] ubi2:dml_code is mounted. [2025-09-23 18:19:09.787] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:19:09.787] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:19:09.787] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:19:09.787] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:19:09.787] data.LB_FadeInType0=100 [2025-09-23 18:19:09.787] data.CHLH_FadeInType0=0 [2025-09-23 18:19:09.807] data.WU_FadeInDelay=0 [2025-09-23 18:19:09.807] max_time_out=0 [2025-09-23 18:19:09.807] No splash screen [2025-09-23 18:19:09.807] stop dss Done [2025-09-23 18:19:09.807] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:19:09.848] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:19:09.848] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:19:09.887] /dev/mem opened. [2025-09-23 18:19:09.887] Memory mapped at address 0xffffac662000. [2025-09-23 18:19:09.887] Read at address 0x00600018 (0xffffac662018): 0x00000000 [2025-09-23 18:19:09.887] Write at address 0x00600018 (0xffffac662018): 0x00400040, readback 0x00400040 [2025-09-23 18:19:10.047] Loaded PowerVR consumer services. [2025-09-23 18:19:10.095] 512+0 records in [2025-09-23 18:19:10.095] 512+0 records out [2025-09-23 18:19:10.111] Waiting data available... [2025-09-23 18:19:10.127] Starting syslogd/klogd: done [2025-09-23 18:19:10.143] DML Start [2025-09-23 18:19:10.319] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:19:10.527] DML res1: 0 [2025-09-23 18:19:10.958] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:19:10.979] Read Success [2025-09-23 18:19:10.979] Verifying certificate... [2025-09-23 18:19:11.235] Verified OK [2025-09-23 18:19:11.251] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:19:12.847] Verified OK [2025-09-23 18:19:12.847] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:19:13.390] Verified OK [2025-09-23 18:19:13.390] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:19:16.188] fs.protected_hardlinks = 1 [2025-09-23 18:19:16.204] fs.protected_symlinks = 1 [2025-09-23 18:19:16.204] kernel.modules_disabled = 1 [2025-09-23 18:19:16.412] [2025-09-23 18:19:16.412] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:19:17.642] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:19:25.391] SBL1:1210.0.1.0 [2025-09-23 18:19:25.439] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:19:27.006] SBL2:1210.0.1.0 [2025-09-23 18:19:27.038] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:19:27.150] j-A [2025-09-23 18:19:34.525] The R5 Autosar Classic is running [2025-09-23 18:19:34.525] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:19:34.525] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:19:35.133] INIT: version 2.96 booting [2025-09-23 18:19:35.244] INIT: Entering runlevel: 5 [2025-09-23 18:19:35.404] mtd28 attached [2025-09-23 18:19:35.420] mtd32 attached [2025-09-23 18:19:35.420] mtd24 attached [2025-09-23 18:19:35.468] ubi0:animations is mounted. [2025-09-23 18:19:35.468] RTNETLINK answers: File exists [2025-09-23 18:19:35.529] ubi2:textures is mounted. [2025-09-23 18:19:35.529] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:19:35.529] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:19:35.529] ubi1:dml_code is mounted. [2025-09-23 18:19:35.529] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:19:35.529] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:19:35.529] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:19:35.529] data.LB_FadeInType0=100 [2025-09-23 18:19:35.529] data.CHLH_FadeInType0=0 [2025-09-23 18:19:35.529] data.WU_FadeInDelay=0 [2025-09-23 18:19:35.529] max_time_out=0 [2025-09-23 18:19:35.529] No splash screen [2025-09-23 18:19:35.529] stop dss Done [2025-09-23 18:19:35.620] /dev/mem opened. [2025-09-23 18:19:35.620] Memory mapped at address 0xffff87a35000. [2025-09-23 18:19:35.620] Read at address 0x00600018 (0xffff87a35018): 0x00000000 [2025-09-23 18:19:35.620] Write at address 0x00600018 (0xffff87a35018): 0x00400040, readback 0x00400040 [2025-09-23 18:19:35.620] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:19:35.620] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:19:35.716] Loaded PowerVR consumer services. [2025-09-23 18:19:35.856] 512+0 records in [2025-09-23 18:19:35.856] 512+0 records out [2025-09-23 18:19:35.856] Waiting data available... [2025-09-23 18:19:35.887] Starting syslogd/klogd: done [2025-09-23 18:19:35.903] DML Start [2025-09-23 18:19:36.095] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:19:36.271] DML res1: 0 [2025-09-23 18:19:36.794] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:19:36.794] Read Success [2025-09-23 18:19:36.794] Verifying certificate... [2025-09-23 18:19:37.018] Verified OK [2025-09-23 18:19:37.018] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:19:38.711] Verified OK [2025-09-23 18:19:38.711] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:19:39.334] Verified OK [2025-09-23 18:19:39.334] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:19:41.861] fs.protected_hardlinks = 1 [2025-09-23 18:19:41.876] fs.protected_symlinks = 1 [2025-09-23 18:19:41.892] kernel.modules_disabled = 1 [2025-09-23 18:19:42.084] [2025-09-23 18:19:42.084] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:19:43.401] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:19:51.126] SBL1:1210.0.1.0 [2025-09-23 18:19:51.158] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:19:52.741] SBL2:1210.0.1.0 [2025-09-23 18:19:52.773] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:19:52.869] j-A [2025-09-23 18:20:00.224] The R5 Autosar Classic is running [2025-09-23 18:20:00.247] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:20:00.247] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:20:00.854] INIT: version 2.96 booting [2025-09-23 18:20:00.966] INIT: Entering runlevel: 5 [2025-09-23 18:20:01.110] mtd24 attached [2025-09-23 18:20:01.127] mtd28 attached [2025-09-23 18:20:01.143] mtd32 attached [2025-09-23 18:20:01.158] ubi0:textures is mounted. [2025-09-23 18:20:01.190] RTNETLINK answers: File exists [2025-09-23 18:20:01.190] ubi1:animations is mounted. [2025-09-23 18:20:01.248] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:20:01.248] ubi2:dml_code is mounted. [2025-09-23 18:20:01.248] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:20:01.248] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:20:01.248] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:20:01.248] data.LB_FadeInType0=100 [2025-09-23 18:20:01.248] data.CHLH_FadeInType0=0 [2025-09-23 18:20:01.248] data.WU_FadeInDelay=0 [2025-09-23 18:20:01.248] max_time_out=0 [2025-09-23 18:20:01.248] No splash screen [2025-09-23 18:20:01.248] stop dss Done [2025-09-23 18:20:01.248] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:20:01.327] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:20:01.327] /dev/mem opened. [2025-09-23 18:20:01.327] Memory mapped at address 0xffffa5889000. [2025-09-23 18:20:01.327] Read at address 0x00600018 (0xffffa5889018): 0x00000000 [2025-09-23 18:20:01.327] Write at address 0x00600018 (0xffffa5889018): 0x00400040, readback 0x00400040 [2025-09-23 18:20:01.327] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:20:01.391] Loaded PowerVR consumer services. [2025-09-23 18:20:01.535] 512+0 records in [2025-09-23 18:20:01.535] 512+0 records out [2025-09-23 18:20:01.551] Waiting data available... [2025-09-23 18:20:01.567] Starting syslogd/klogd: done [2025-09-23 18:20:01.583] DML Start [2025-09-23 18:20:01.839] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:20:02.063] DML res1: 0 [2025-09-23 18:20:02.366] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:20:02.382] Read Success [2025-09-23 18:20:02.382] Verifying certificate... [2025-09-23 18:20:02.638] Verified OK [2025-09-23 18:20:02.654] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:20:04.318] Verified OK [2025-09-23 18:20:04.318] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:20:04.986] Verified OK [2025-09-23 18:20:04.986] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:20:07.673] fs.protected_hardlinks = 1 [2025-09-23 18:20:07.673] fs.protected_symlinks = 1 [2025-09-23 18:20:07.689] kernel.modules_disabled = 1 [2025-09-23 18:20:07.880] [2025-09-23 18:20:07.880] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:20:09.105] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:20:16.826] SBL1:1210.0.1.0 [2025-09-23 18:20:16.873] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:20:18.440] SBL2:1210.0.1.0 [2025-09-23 18:20:18.472] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:20:18.584] j-A [2025-09-23 18:20:25.959] The R5 Autosar Classic is running [2025-09-23 18:20:25.959] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:20:25.959] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:20:26.566] INIT: version 2.96 booting [2025-09-23 18:20:26.663] INIT: Entering runlevel: 5 [2025-09-23 18:20:26.822] mtd24 attached [2025-09-23 18:20:26.839] mtd28 attached [2025-09-23 18:20:26.855] mtd32 attached [2025-09-23 18:20:26.956] ubi1:animations is mounted. [2025-09-23 18:20:26.956] ubi0:textures is mounted. [2025-09-23 18:20:26.956] RTNETLINK answers: File exists [2025-09-23 18:20:26.956] ubi2:dml_code is mounted. [2025-09-23 18:20:26.956] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:20:26.956] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:20:26.956] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:20:26.956] data.LB_FadeInType0=100 [2025-09-23 18:20:26.956] data.CHLH_FadeInType0=0 [2025-09-23 18:20:26.956] data.WU_FadeInDelay=0 [2025-09-23 18:20:26.956] max_time_out=0 [2025-09-23 18:20:26.956] No splash screen [2025-09-23 18:20:26.956] stop dss Done [2025-09-23 18:20:26.956] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:20:26.956] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:20:27.026] /dev/mem opened. [2025-09-23 18:20:27.026] Memory mapped at address 0xffff8081e000. [2025-09-23 18:20:27.026] Read at address 0x00600018 (0xffff8081e018): 0x00000000 [2025-09-23 18:20:27.026] Write at address 0x00600018 (0xffff8081e018): 0x00400040, readback 0x00400040 [2025-09-23 18:20:27.043] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:20:27.059] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:20:27.138] Loaded PowerVR consumer services. [2025-09-23 18:20:27.267] 512+0 records in [2025-09-23 18:20:27.267] 512+0 records out [2025-09-23 18:20:27.282] Waiting data available... [2025-09-23 18:20:27.314] Starting syslogd/klogd: done [2025-09-23 18:20:27.346] DML Start [2025-09-23 18:20:27.490] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:20:27.698] DML res1: 0 [2025-09-23 18:20:28.287] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:20:28.287] Read Success [2025-09-23 18:20:28.287] Verifying certificate... [2025-09-23 18:20:28.527] Verified OK [2025-09-23 18:20:28.559] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:20:30.308] Verified OK [2025-09-23 18:20:30.308] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:20:30.909] Verified OK [2025-09-23 18:20:30.909] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:20:33.418] fs.protected_hardlinks = 1 [2025-09-23 18:20:33.434] fs.protected_symlinks = 1 [2025-09-23 18:20:33.434] kernel.modules_disabled = 1 [2025-09-23 18:20:33.627] [2025-09-23 18:20:33.627] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:20:34.834] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:20:42.539] SBL1:1210.0.1.0 [2025-09-23 18:20:42.587] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:20:44.154] SBL2:1210.0.1.0 [2025-09-23 18:20:44.185] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:20:44.298] j-A [2025-09-23 18:20:51.673] The R5 Autosar Classic is running [2025-09-23 18:20:51.673] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:20:51.673] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:20:52.280] INIT: version 2.96 booting [2025-09-23 18:20:52.393] INIT: Entering runlevel: 5 [2025-09-23 18:20:52.536] mtd24 attached [2025-09-23 18:20:52.552] mtd28 attached [2025-09-23 18:20:52.584] ubi0:textures is mounted. [2025-09-23 18:20:52.584] mtd32 attached [2025-09-23 18:20:52.600] ubi1:animations is mounted. [2025-09-23 18:20:52.616] RTNETLINK answers: File exists [2025-09-23 18:20:52.675] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:20:52.675] ubi2:dml_code is mounted. [2025-09-23 18:20:52.675] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:20:52.675] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:20:52.675] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:20:52.675] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:20:52.675] data.LB_FadeInType0=100 [2025-09-23 18:20:52.675] data.CHLH_FadeInType0=0 [2025-09-23 18:20:52.675] data.WU_FadeInDelay=0 [2025-09-23 18:20:52.675] max_time_out=0 [2025-09-23 18:20:52.675] No splash screen [2025-09-23 18:20:52.675] stop dss Done [2025-09-23 18:20:52.757] /dev/mem opened. [2025-09-23 18:20:52.757] Memory mapped at address 0xffffb0355000. [2025-09-23 18:20:52.757] Read at address 0x00600018 (0xffffb0355018): 0x00000000 [2025-09-23 18:20:52.757] Write at address 0x00600018 (0xffffb0355018): 0x00400040, readback 0x00400040 [2025-09-23 18:20:52.757] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:20:52.757] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:20:52.917] Loaded PowerVR consumer services. [2025-09-23 18:20:53.009] 512+0 records in [2025-09-23 18:20:53.009] 512+0 records out [2025-09-23 18:20:53.009] Waiting data available... [2025-09-23 18:20:53.041] Starting syslogd/klogd: done [2025-09-23 18:20:53.057] DML Start [2025-09-23 18:20:53.233] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:20:53.457] DML res1: 0 [2025-09-23 18:20:53.910] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:20:53.910] Read Success [2025-09-23 18:20:53.910] Verifying certificate... [2025-09-23 18:20:54.166] Verified OK [2025-09-23 18:20:54.182] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:20:55.837] Verified OK [2025-09-23 18:20:55.837] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:20:56.402] Verified OK [2025-09-23 18:20:56.402] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:20:59.057] fs.protected_hardlinks = 1 [2025-09-23 18:20:59.073] fs.protected_symlinks = 1 [2025-09-23 18:20:59.073] kernel.modules_disabled = 1 [2025-09-23 18:20:59.264] [2025-09-23 18:20:59.264] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:21:00.615] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:21:08.267] SBL1:1210.0.1.0 [2025-09-23 18:21:08.299] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:21:09.882] SBL2:1210.0.1.0 [2025-09-23 18:21:09.914] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:21:10.026] j-A [2025-09-23 18:21:17.365] The R5 Autosar Classic is running [2025-09-23 18:21:17.390] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:21:17.390] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:21:17.997] INIT: version 2.96 booting [2025-09-23 18:21:18.109] INIT: Entering runlevel: 5 [2025-09-23 18:21:18.253] mtd28 attached [2025-09-23 18:21:18.269] mtd32 attached [2025-09-23 18:21:18.284] mtd24 attached [2025-09-23 18:21:18.300] ubi0:animations is mounted. [2025-09-23 18:21:18.332] ubi1:dml_code is mounted. [2025-09-23 18:21:18.332] RTNETLINK answers: File exists [2025-09-23 18:21:18.390] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:21:18.390] ubi2:textures is mounted. [2025-09-23 18:21:18.390] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:21:18.390] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:21:18.390] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:21:18.390] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:21:18.390] data.LB_FadeInType0=100 [2025-09-23 18:21:18.390] data.CHLH_FadeInType0=0 [2025-09-23 18:21:18.390] data.WU_FadeInDelay=0 [2025-09-23 18:21:18.390] max_time_out=0 [2025-09-23 18:21:18.390] No splash screen [2025-09-23 18:21:18.390] stop dss Done [2025-09-23 18:21:18.470] /dev/mem opened. [2025-09-23 18:21:18.470] Memory mapped at address 0xffff8837d000. [2025-09-23 18:21:18.470] Read at address 0x00600018 (0xffff8837d018): 0x00000000 [2025-09-23 18:21:18.470] Write at address 0x00600018 (0xffff8837d018): 0x00400040, readback 0x00400040 [2025-09-23 18:21:18.470] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:21:18.486] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:21:18.645] Loaded PowerVR consumer services. [2025-09-23 18:21:18.677] 512+0 records in [2025-09-23 18:21:18.677] 512+0 records out [2025-09-23 18:21:18.709] Waiting data available... [2025-09-23 18:21:18.726] Starting syslogd/klogd: done [2025-09-23 18:21:18.758] DML Start [2025-09-23 18:21:18.933] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:21:19.173] DML res1: 0 [2025-09-23 18:21:19.594] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:21:19.594] Read Success [2025-09-23 18:21:19.594] Verifying certificate... [2025-09-23 18:21:19.850] Verified OK [2025-09-23 18:21:19.866] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:21:21.507] Verified OK [2025-09-23 18:21:21.507] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:21:22.155] Verified OK [2025-09-23 18:21:22.155] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:21:24.857] fs.protected_hardlinks = 1 [2025-09-23 18:21:24.885] fs.protected_symlinks = 1 [2025-09-23 18:21:24.885] kernel.modules_disabled = 1 [2025-09-23 18:21:25.061] [2025-09-23 18:21:25.061] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:21:26.273] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:21:33.977] SBL1:1210.0.1.0 [2025-09-23 18:21:34.009] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:21:35.592] SBL2:1210.0.1.0 [2025-09-23 18:21:35.624] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:21:35.737] j-A [2025-09-23 18:21:43.075] The R5 Autosar Classic is running [2025-09-23 18:21:43.106] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:21:43.106] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:21:43.714] INIT: version 2.96 booting [2025-09-23 18:21:43.826] INIT: Entering runlevel: 5 [2025-09-23 18:21:43.985] mtd28 attached [2025-09-23 18:21:43.985] mtd24 attached [2025-09-23 18:21:44.017] mtd32 attached [2025-09-23 18:21:44.017] ubi0:animations is mounted. [2025-09-23 18:21:44.049] ubi1:textures is mounted. [2025-09-23 18:21:44.049] RTNETLINK answers: File exists [2025-09-23 18:21:44.077] ubi2:dml_code is mounted. [2025-09-23 18:21:44.077] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:21:44.077] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:21:44.077] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:21:44.116] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:21:44.116] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:21:44.116] data.LB_FadeInType0=100 [2025-09-23 18:21:44.116] data.CHLH_FadeInType0=0 [2025-09-23 18:21:44.116] data.WU_FadeInDelay=0 [2025-09-23 18:21:44.116] max_time_out=0 [2025-09-23 18:21:44.116] No splash screen [2025-09-23 18:21:44.116] stop dss Done [2025-09-23 18:21:44.164] /dev/mem opened. [2025-09-23 18:21:44.164] Memory mapped at address 0xffff99c85000. [2025-09-23 18:21:44.190] Read at address 0x00600018 (0xffff99c85018): 0x00000000 [2025-09-23 18:21:44.190] Write at address 0x00600018 (0xffff99c85018): 0x00400040, readback 0x00400040 [2025-09-23 18:21:44.190] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:21:44.211] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:21:44.340] Loaded PowerVR consumer services. [2025-09-23 18:21:44.371] 512+0 records in [2025-09-23 18:21:44.387] 512+0 records out [2025-09-23 18:21:44.403] Starting syslogd/klogd: done [2025-09-23 18:21:44.516] Waiting data available... [2025-09-23 18:21:44.516] DML Start [2025-09-23 18:21:44.691] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:21:44.915] DML res1: 0 [2025-09-23 18:21:45.277] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:21:45.277] Read Success [2025-09-23 18:21:45.277] Verifying certificate... [2025-09-23 18:21:45.517] Verified OK [2025-09-23 18:21:45.533] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:21:47.388] Verified OK [2025-09-23 18:21:47.388] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:21:47.895] Verified OK [2025-09-23 18:21:47.895] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:21:50.358] fs.protected_hardlinks = 1 [2025-09-23 18:21:50.374] fs.protected_symlinks = 1 [2025-09-23 18:21:50.374] kernel.modules_disabled = 1 [2025-09-23 18:21:50.581] [2025-09-23 18:21:50.581] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:21:51.900] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:21:59.693] SBL1:1210.0.1.0 [2025-09-23 18:21:59.740] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:22:01.307] SBL2:1210.0.1.0 [2025-09-23 18:22:01.339] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:22:01.451] j-A [2025-09-23 18:22:08.823] The R5 Autosar Classic is running [2025-09-23 18:22:08.823] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:22:08.823] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:22:09.430] INIT: version 2.96 booting [2025-09-23 18:22:09.542] INIT: Entering runlevel: 5 [2025-09-23 18:22:09.702] mtd32 attached [2025-09-23 18:22:09.702] mtd28 attached [2025-09-23 18:22:09.718] mtd24 attached [2025-09-23 18:22:09.766] ubi0:dml_code is mounted. [2025-09-23 18:22:09.766] RTNETLINK answers: File exists [2025-09-23 18:22:09.808] ubi2:textures is mounted. [2025-09-23 18:22:09.808] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:22:09.808] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:22:09.808] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:22:09.808] ubi1:animations is mounted. [2025-09-23 18:22:09.808] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:22:09.808] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:22:09.833] data.LB_FadeInType0=100 [2025-09-23 18:22:09.833] data.CHLH_FadeInType0=0 [2025-09-23 18:22:09.833] data.WU_FadeInDelay=0 [2025-09-23 18:22:09.833] max_time_out=0 [2025-09-23 18:22:09.833] No splash screen [2025-09-23 18:22:09.833] stop dss Done [2025-09-23 18:22:09.864] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:22:09.909] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:22:09.909] /dev/mem opened. [2025-09-23 18:22:09.909] Memory mapped at address 0xffff812f4000. [2025-09-23 18:22:09.909] Read at address 0x00600018 (0xffff812f4018): 0x00000000 [2025-09-23 18:22:09.909] Write at address 0x00600018 (0xffff812f4018): 0x00400040, readback 0x00400040 [2025-09-23 18:22:10.085] Loaded PowerVR consumer services. [2025-09-23 18:22:10.117] 512+0 records in [2025-09-23 18:22:10.117] 512+0 records out [2025-09-23 18:22:10.148] Waiting data available... [2025-09-23 18:22:10.164] Starting syslogd/klogd: done [2025-09-23 18:22:10.180] DML Start [2025-09-23 18:22:10.357] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:22:10.580] DML res1: 0 [2025-09-23 18:22:10.997] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:22:11.012] Read Success [2025-09-23 18:22:11.012] Verifying certificate... [2025-09-23 18:22:11.236] Verified OK [2025-09-23 18:22:11.252] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:22:12.771] Verified OK [2025-09-23 18:22:12.771] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:22:13.465] Verified OK [2025-09-23 18:22:13.465] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:22:16.260] fs.protected_hardlinks = 1 [2025-09-23 18:22:16.260] fs.protected_symlinks = 1 [2025-09-23 18:22:16.260] kernel.modules_disabled = 1 [2025-09-23 18:22:16.435] [2025-09-23 18:22:16.435] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:22:17.674] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:22:25.406] SBL1:1210.0.1.0 [2025-09-23 18:22:25.454] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:22:27.021] SBL2:1210.0.1.0 [2025-09-23 18:22:27.069] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:22:27.165] j-A [2025-09-23 18:22:34.519] The R5 Autosar Classic is running [2025-09-23 18:22:34.541] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:22:34.541] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:22:35.149] INIT: version 2.96 booting [2025-09-23 18:22:35.261] INIT: Entering runlevel: 5 [2025-09-23 18:22:35.420] mtd32 attached [2025-09-23 18:22:35.420] mtd24 attached [2025-09-23 18:22:35.436] mtd28 attached [2025-09-23 18:22:35.485] ubi0:dml_code is mounted. [2025-09-23 18:22:35.501] RTNETLINK answers: File exists [2025-09-23 18:22:35.501] ubi2:animations is mounted. [2025-09-23 18:22:35.557] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:22:35.557] ubi1:textures is mounted. [2025-09-23 18:22:35.557] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:22:35.557] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:22:35.557] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:22:35.557] data.LB_FadeInType0=100 [2025-09-23 18:22:35.557] data.CHLH_FadeInType0=0 [2025-09-23 18:22:35.557] data.WU_FadeInDelay=0 [2025-09-23 18:22:35.557] max_time_out=0 [2025-09-23 18:22:35.557] No splash screen [2025-09-23 18:22:35.557] stop dss Done [2025-09-23 18:22:35.557] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:22:35.589] /dev/mem opened. [2025-09-23 18:22:35.589] Memory mapped at address 0xffffb44cb000. [2025-09-23 18:22:35.614] Read at address 0x00600018 (0xffffb44cb018): 0x00000000 [2025-09-23 18:22:35.614] Write at address 0x00600018 (0xffffb44cb018): 0x00400040, readback 0x00400040 [2025-09-23 18:22:35.614] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:22:35.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:22:35.804] Loaded PowerVR consumer services. [2025-09-23 18:22:35.820] 512+0 records in [2025-09-23 18:22:35.820] 512+0 records out [2025-09-23 18:22:35.869] Waiting data available... [2025-09-23 18:22:35.885] Starting syslogd/klogd: done [2025-09-23 18:22:35.901] DML Start [2025-09-23 18:22:36.092] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:22:36.300] DML res1: 0 [2025-09-23 18:22:36.780] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:22:36.796] Read Success [2025-09-23 18:22:36.796] Verifying certificate... [2025-09-23 18:22:37.036] Verified OK [2025-09-23 18:22:37.051] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:22:38.794] Verified OK [2025-09-23 18:22:38.794] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:22:39.397] Verified OK [2025-09-23 18:22:39.397] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:22:41.860] fs.protected_hardlinks = 1 [2025-09-23 18:22:41.875] fs.protected_symlinks = 1 [2025-09-23 18:22:41.875] kernel.modules_disabled = 1 [2025-09-23 18:22:42.067] [2025-09-23 18:22:42.067] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:22:43.404] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:22:51.128] SBL1:1210.0.1.0 [2025-09-23 18:22:51.159] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:22:52.741] SBL2:1210.0.1.0 [2025-09-23 18:22:52.773] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:22:52.870] j-A [2025-09-23 18:23:00.225] The R5 Autosar Classic is running [2025-09-23 18:23:00.248] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:23:00.248] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:23:00.855] INIT: version 2.96 booting [2025-09-23 18:23:00.967] INIT: Entering runlevel: 5 [2025-09-23 18:23:01.111] mtd28 attached [2025-09-23 18:23:01.127] mtd24 attached [2025-09-23 18:23:01.143] mtd32 attached [2025-09-23 18:23:01.175] ubi0:animations is mounted. [2025-09-23 18:23:01.191] RTNETLINK answers: File exists [2025-09-23 18:23:01.248] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:23:01.248] ubi1:textures is mounted. [2025-09-23 18:23:01.248] ubi2:dml_code is mounted. [2025-09-23 18:23:01.248] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:23:01.248] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:23:01.248] data.LB_FadeInType0=100 [2025-09-23 18:23:01.248] data.CHLH_FadeInType0=0 [2025-09-23 18:23:01.248] data.WU_FadeInDelay=0 [2025-09-23 18:23:01.248] max_time_out=0 [2025-09-23 18:23:01.248] No splash screen [2025-09-23 18:23:01.248] stop dss Done [2025-09-23 18:23:01.248] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:23:01.248] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:23:01.325] /dev/mem opened. [2025-09-23 18:23:01.325] Memory mapped at address 0xffff959ee000. [2025-09-23 18:23:01.325] Read at address 0x00600018 (0xffff959ee018): 0x00000000 [2025-09-23 18:23:01.325] Write at address 0x00600018 (0xffff959ee018): 0x00400040, readback 0x00400040 [2025-09-23 18:23:01.325] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:23:01.325] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:23:01.421] Loaded PowerVR consumer services. [2025-09-23 18:23:01.549] 512+0 records in [2025-09-23 18:23:01.549] 512+0 records out [2025-09-23 18:23:01.549] Waiting data available... [2025-09-23 18:23:01.596] Starting syslogd/klogd: done [2025-09-23 18:23:01.628] DML Start [2025-09-23 18:23:01.821] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:23:02.076] DML res1: 0 [2025-09-23 18:23:02.411] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:23:02.411] Read Success [2025-09-23 18:23:02.411] Verifying certificate... [2025-09-23 18:23:02.651] Verified OK [2025-09-23 18:23:02.667] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:23:04.090] Verified OK [2025-09-23 18:23:04.090] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:23:04.737] Verified OK [2025-09-23 18:23:04.737] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:23:07.519] fs.protected_hardlinks = 1 [2025-09-23 18:23:07.519] fs.protected_symlinks = 1 [2025-09-23 18:23:07.535] kernel.modules_disabled = 1 [2025-09-23 18:23:07.711] [2025-09-23 18:23:07.711] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:23:09.134] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:23:16.841] SBL1:1210.0.1.0 [2025-09-23 18:23:16.889] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:23:18.456] SBL2:1210.0.1.0 [2025-09-23 18:23:18.488] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:23:18.600] j-A [2025-09-23 18:23:25.973] The R5 Autosar Classic is running [2025-09-23 18:23:25.973] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:23:25.973] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:23:26.580] INIT: version 2.96 booting [2025-09-23 18:23:26.692] INIT: Entering runlevel: 5 [2025-09-23 18:23:26.836] mtd24 attached [2025-09-23 18:23:26.852] mtd28 attached [2025-09-23 18:23:26.852] mtd32 attached [2025-09-23 18:23:26.950] RTNETLINK answers: File exists [2025-09-23 18:23:26.950] ubi0:textures is mounted. [2025-09-23 18:23:26.950] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:23:26.950] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:23:26.950] ubi1:animations is mounted. [2025-09-23 18:23:26.950] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:23:26.950] ubi2:dml_code is mounted. [2025-09-23 18:23:26.950] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:23:26.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:23:26.974] data.LB_FadeInType0=100 [2025-09-23 18:23:26.974] data.CHLH_FadeInType0=0 [2025-09-23 18:23:26.974] data.WU_FadeInDelay=0 [2025-09-23 18:23:26.974] max_time_out=0 [2025-09-23 18:23:26.974] No splash screen [2025-09-23 18:23:26.974] stop dss Done [2025-09-23 18:23:27.022] /dev/mem opened. [2025-09-23 18:23:27.022] Memory mapped at address 0xffff93e87000. [2025-09-23 18:23:27.054] Read at address 0x00600018 (0xffff93e87018): 0x00000000 [2025-09-23 18:23:27.054] Write at address 0x00600018 (0xffff93e87018): 0x00400040, readback 0x00400040 [2025-09-23 18:23:27.054] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:23:27.054] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:23:27.165] Loaded PowerVR consumer services. [2025-09-23 18:23:27.278] 512+0 records in [2025-09-23 18:23:27.278] 512+0 records out [2025-09-23 18:23:27.294] Waiting data available... [2025-09-23 18:23:27.342] Starting syslogd/klogd: done [2025-09-23 18:23:27.358] DML Start [2025-09-23 18:23:27.501] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:23:27.773] DML res1: 0 [2025-09-23 18:23:28.152] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:23:28.152] Read Success [2025-09-23 18:23:28.152] Verifying certificate... [2025-09-23 18:23:28.440] Verified OK [2025-09-23 18:23:28.456] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:23:30.189] Verified OK [2025-09-23 18:23:30.189] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:23:30.813] Verified OK [2025-09-23 18:23:30.813] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:23:33.451] fs.protected_hardlinks = 1 [2025-09-23 18:23:33.467] fs.protected_symlinks = 1 [2025-09-23 18:23:33.467] kernel.modules_disabled = 1 [2025-09-23 18:23:33.659] [2025-09-23 18:23:33.659] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:23:34.862] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:23:42.553] SBL1:1210.0.1.0 [2025-09-23 18:23:42.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:23:44.168] SBL2:1210.0.1.0 [2025-09-23 18:23:44.200] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:23:44.296] j-A [2025-09-23 18:23:51.652] The R5 Autosar Classic is running [2025-09-23 18:23:51.674] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:23:51.674] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:23:52.282] INIT: version 2.96 booting [2025-09-23 18:23:52.394] INIT: Entering runlevel: 5 [2025-09-23 18:23:52.554] mtd24 attached [2025-09-23 18:23:52.554] mtd28 attached [2025-09-23 18:23:52.570] mtd32 attached [2025-09-23 18:23:52.618] ubi0:textures is mounted. [2025-09-23 18:23:52.682] RTNETLINK answers: File exists [2025-09-23 18:23:52.682] ubi1:animations is mounted. [2025-09-23 18:23:52.682] ubi2:dml_code is mounted. [2025-09-23 18:23:52.682] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:23:52.682] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:23:52.682] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:23:52.682] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:23:52.682] data.LB_FadeInType0=100 [2025-09-23 18:23:52.682] data.CHLH_FadeInType0=0 [2025-09-23 18:23:52.682] data.WU_FadeInDelay=0 [2025-09-23 18:23:52.682] max_time_out=0 [2025-09-23 18:23:52.682] No splash screen [2025-09-23 18:23:52.682] stop dss Done [2025-09-23 18:23:52.682] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:23:52.724] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:23:52.724] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:23:52.724] /dev/mem opened. [2025-09-23 18:23:52.756] Memory mapped at address 0xffffb7400000. [2025-09-23 18:23:52.756] Read at address 0x00600018 (0xffffb7400018): 0x00000000 [2025-09-23 18:23:52.756] Write at address 0x00600018 (0xffffb7400018): 0x00400040, readback 0x00400040 [2025-09-23 18:23:52.852] Loaded PowerVR consumer services. [2025-09-23 18:23:52.964] 512+0 records in [2025-09-23 18:23:52.964] 512+0 records out [2025-09-23 18:23:52.996] Waiting data available... [2025-09-23 18:23:53.012] Starting syslogd/klogd: done [2025-09-23 18:23:53.028] DML Start [2025-09-23 18:23:53.219] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:23:53.459] DML res1: 0 [2025-09-23 18:23:53.859] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:23:53.875] Read Success [2025-09-23 18:23:53.875] Verifying certificate... [2025-09-23 18:23:54.115] Verified OK [2025-09-23 18:23:54.115] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:23:55.713] Verified OK [2025-09-23 18:23:55.734] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:23:56.422] Verified OK [2025-09-23 18:23:56.438] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:23:59.044] fs.protected_hardlinks = 1 [2025-09-23 18:23:59.044] fs.protected_symlinks = 1 [2025-09-23 18:23:59.060] kernel.modules_disabled = 1 [2025-09-23 18:23:59.252] [2025-09-23 18:23:59.252] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:24:00.543] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:24:08.265] SBL1:1210.0.1.0 [2025-09-23 18:24:08.296] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:24:09.879] SBL2:1210.0.1.0 [2025-09-23 18:24:09.911] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 18:24:10.023] j-A [2025-09-23 18:24:17.363] The R5 Autosar Classic is running [2025-09-23 18:24:17.394] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:24:17.394] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:24:18.001] INIT: version 2.96 booting [2025-09-23 18:24:18.113] INIT: Entering runlevel: 5 [2025-09-23 18:24:18.257] mtd24 attached [2025-09-23 18:24:18.273] mtd28 attached [2025-09-23 18:24:18.290] mtd32 attached [2025-09-23 18:24:18.371] RTNETLINK answers: File exists [2025-09-23 18:24:18.371] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:24:18.371] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:24:18.371] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:24:18.371] ubi1:animations is mounted. [2025-09-23 18:24:18.371] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:24:18.371] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:24:18.371] ubi2:dml_code is mounted. [2025-09-23 18:24:18.371] ubi0:textures is mounted. [2025-09-23 18:24:18.387] data.LB_FadeInType0=100 [2025-09-23 18:24:18.428] data.CHLH_FadeInType0=0 [2025-09-23 18:24:18.428] data.WU_FadeInDelay=0 [2025-09-23 18:24:18.428] max_time_out=0 [2025-09-23 18:24:18.428] No splash screen [2025-09-23 18:24:18.428] stop dss Done [2025-09-23 18:24:18.428] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:24:18.428] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:24:18.460] /dev/mem opened. [2025-09-23 18:24:18.492] Memory mapped at address 0xffffa98fa000. [2025-09-23 18:24:18.492] Read at address 0x00600018 (0xffffa98fa018): 0x00000000 [2025-09-23 18:24:18.492] Write at address 0x00600018 (0xffffa98fa018): 0x00400040, readback 0x00400040 [2025-09-23 18:24:18.636] Loaded PowerVR consumer services. [2025-09-23 18:24:18.715] 512+0 records in [2025-09-23 18:24:18.715] 512+0 records out [2025-09-23 18:24:18.715] Waiting data available... [2025-09-23 18:24:18.715] Starting syslogd/klogd: done [2025-09-23 18:24:18.731] DML Start [2025-09-23 18:24:18.907] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:24:19.147] DML res1: 0 [2025-09-23 18:24:19.584] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:24:19.584] Read Success [2025-09-23 18:24:19.584] Verifying certificate... [2025-09-23 18:24:19.871] Verified OK [2025-09-23 18:24:19.903] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:24:21.491] Verified OK [2025-09-23 18:24:21.491] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:24:22.082] Verified OK [2025-09-23 18:24:22.082] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:24:24.848] fs.protected_hardlinks = 1 [2025-09-23 18:24:24.865] fs.protected_symlinks = 1 [2025-09-23 18:24:24.865] kernel.modules_disabled = 1 [2025-09-23 18:24:25.056] [2025-09-23 18:24:25.056] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:24:26.236] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:24:33.978] SBL1:1210.0.1.0 [2025-09-23 18:24:34.010] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:24:35.594] SBL2:1210.0.1.0 [2025-09-23 18:24:35.626] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:24:35.737] j-A [2025-09-23 18:24:43.077] The R5 Autosar Classic is running [2025-09-23 18:24:43.102] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:24:43.102] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:24:43.710] INIT: version 2.96 booting [2025-09-23 18:24:43.821] INIT: Entering runlevel: 5 [2025-09-23 18:24:43.982] mtd24 attached [2025-09-23 18:24:43.998] mtd32 attached [2025-09-23 18:24:44.014] mtd28 attached [2025-09-23 18:24:44.030] ubi0:textures is mounted. [2025-09-23 18:24:44.062] ubi1:dml_code is mounted. [2025-09-23 18:24:44.062] RTNETLINK answers: File exists [2025-09-23 18:24:44.124] ubi2:animations is mounted. [2025-09-23 18:24:44.124] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:24:44.124] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:24:44.124] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:24:44.124] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:24:44.124] data.LB_FadeInType0=100 [2025-09-23 18:24:44.124] data.CHLH_FadeInType0=0 [2025-09-23 18:24:44.124] data.WU_FadeInDelay=0 [2025-09-23 18:24:44.124] max_time_out=0 [2025-09-23 18:24:44.124] No splash screen [2025-09-23 18:24:44.124] stop dss Done [2025-09-23 18:24:44.124] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:24:44.156] /dev/mem opened. [2025-09-23 18:24:44.156] Memory mapped at address 0xffffa908a000. [2025-09-23 18:24:44.182] Read at address 0x00600018 (0xffffa908a018): 0x00000000 [2025-09-23 18:24:44.182] Write at address 0x00600018 (0xffffa908a018): 0x00400040, readback 0x00400040 [2025-09-23 18:24:44.198] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:24:44.230] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:24:44.374] Loaded PowerVR consumer services. [2025-09-23 18:24:44.405] 512+0 records in [2025-09-23 18:24:44.405] 512+0 records out [2025-09-23 18:24:44.453] Waiting data available... [2025-09-23 18:24:44.469] Starting syslogd/klogd: done [2025-09-23 18:24:44.485] DML Start [2025-09-23 18:24:44.661] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:24:44.901] DML res1: 0 [2025-09-23 18:24:45.344] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:24:45.344] Read Success [2025-09-23 18:24:45.344] Verifying certificate... [2025-09-23 18:24:45.568] Verified OK [2025-09-23 18:24:45.584] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:24:47.399] Verified OK [2025-09-23 18:24:47.399] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:24:48.001] Verified OK [2025-09-23 18:24:48.001] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:24:50.544] fs.protected_hardlinks = 1 [2025-09-23 18:24:50.544] fs.protected_symlinks = 1 [2025-09-23 18:24:50.559] kernel.modules_disabled = 1 [2025-09-23 18:24:50.735] [2025-09-23 18:24:50.735] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:24:52.004] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:24:59.685] SBL1:1210.0.1.0 [2025-09-23 18:24:59.733] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:25:01.299] SBL2:1210.0.1.0 [2025-09-23 18:25:01.331] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:25:01.443] j-A [2025-09-23 18:25:08.815] The R5 Autosar Classic is running [2025-09-23 18:25:08.815] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:25:08.815] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:25:09.422] INIT: version 2.96 booting [2025-09-23 18:25:09.534] INIT: Entering runlevel: 5 [2025-09-23 18:25:09.678] mtd24 attached [2025-09-23 18:25:09.694] mtd28 attached [2025-09-23 18:25:09.710] mtd32 attached [2025-09-23 18:25:09.812] RTNETLINK answers: File exists [2025-09-23 18:25:09.812] ubi0:textures is mounted. [2025-09-23 18:25:09.812] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:25:09.812] ubi2:dml_code is mounted. [2025-09-23 18:25:09.812] ubi1:animations is mounted. [2025-09-23 18:25:09.812] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:25:09.812] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:25:09.812] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:25:09.812] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:25:09.812] data.LB_FadeInType0=100 [2025-09-23 18:25:09.812] data.CHLH_FadeInType0=0 [2025-09-23 18:25:09.812] data.WU_FadeInDelay=0 [2025-09-23 18:25:09.812] max_time_out=0 [2025-09-23 18:25:09.812] No splash screen [2025-09-23 18:25:09.812] stop dss Done [2025-09-23 18:25:09.905] /dev/mem opened. [2025-09-23 18:25:09.905] Memory mapped at address 0xffffa9222000. [2025-09-23 18:25:09.905] Read at address 0x00600018 (0xffffa9222018): 0x00000000 [2025-09-23 18:25:09.905] Write at address 0x00600018 (0xffffa9222018): 0x00400040, readback 0x00400040 [2025-09-23 18:25:09.905] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:25:09.905] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:25:10.065] Loaded PowerVR consumer services. [2025-09-23 18:25:10.134] Waiting data available... [2025-09-23 18:25:10.134] 512+0 records in [2025-09-23 18:25:10.135] 512+0 records out [2025-09-23 18:25:10.166] Starting syslogd/klogd: done [2025-09-23 18:25:10.183] DML Start [2025-09-23 18:25:10.359] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:25:10.582] DML res1: 0 [2025-09-23 18:25:11.051] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:25:11.051] Read Success [2025-09-23 18:25:11.051] Verifying certificate... [2025-09-23 18:25:11.276] Verified OK [2025-09-23 18:25:11.292] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:25:12.857] Verified OK [2025-09-23 18:25:12.857] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:25:13.489] Verified OK [2025-09-23 18:25:13.489] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:25:16.255] fs.protected_hardlinks = 1 [2025-09-23 18:25:16.255] fs.protected_symlinks = 1 [2025-09-23 18:25:16.271] kernel.modules_disabled = 1 [2025-09-23 18:25:16.479] [2025-09-23 18:25:16.479] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:25:17.688] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:25:25.386] SBL1:1210.0.1.0 [2025-09-23 18:25:25.434] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:25:27.000] SBL2:1210.0.1.0 [2025-09-23 18:25:27.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:25:27.144] j-A [2025-09-23 18:25:34.516] The R5 Autosar Classic is running [2025-09-23 18:25:34.516] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:25:34.516] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:25:35.124] INIT: version 2.96 booting [2025-09-23 18:25:35.235] INIT: Entering runlevel: 5 [2025-09-23 18:25:35.380] mtd24 attached [2025-09-23 18:25:35.395] mtd28 attached [2025-09-23 18:25:35.411] mtd32 attached [2025-09-23 18:25:35.427] ubi0:textures is mounted. [2025-09-23 18:25:35.492] RTNETLINK answers: File exists [2025-09-23 18:25:35.492] ubi1:animations is mounted. [2025-09-23 18:25:35.492] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:25:35.492] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:25:35.492] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:25:35.492] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:25:35.492] ubi2:dml_code is mounted. [2025-09-23 18:25:35.492] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:25:35.521] data.LB_FadeInType0=100 [2025-09-23 18:25:35.521] data.CHLH_FadeInType0=0 [2025-09-23 18:25:35.521] data.WU_FadeInDelay=0 [2025-09-23 18:25:35.521] max_time_out=0 [2025-09-23 18:25:35.521] No splash screen [2025-09-23 18:25:35.521] stop dss Done [2025-09-23 18:25:35.549] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:25:35.549] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:25:35.602] /dev/mem opened. [2025-09-23 18:25:35.602] Memory mapped at address 0xffffab0ac000. [2025-09-23 18:25:35.602] Read at address 0x00600018 (0xffffab0ac018): 0x00000000 [2025-09-23 18:25:35.602] Write at address 0x00600018 (0xffffab0ac018): 0x00400040, readback 0x00400040 [2025-09-23 18:25:35.682] Loaded PowerVR consumer services. [2025-09-23 18:25:35.810] Waiting data available... [2025-09-23 18:25:35.810] 512+0 records in [2025-09-23 18:25:35.826] 512+0 records out [2025-09-23 18:25:35.858] Starting syslogd/klogd: done [2025-09-23 18:25:35.890] DML Start [2025-09-23 18:25:36.066] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:25:36.242] DML res1: 0 [2025-09-23 18:25:36.727] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:25:36.727] Read Success [2025-09-23 18:25:36.727] Verifying certificate... [2025-09-23 18:25:36.966] Verified OK [2025-09-23 18:25:36.999] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:25:38.659] Verified OK [2025-09-23 18:25:38.659] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:25:39.294] Verified OK [2025-09-23 18:25:39.294] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:25:41.883] fs.protected_hardlinks = 1 [2025-09-23 18:25:41.883] fs.protected_symlinks = 1 [2025-09-23 18:25:41.899] kernel.modules_disabled = 1 [2025-09-23 18:25:42.092] [2025-09-23 18:25:42.092] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:25:43.389] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:25:51.120] SBL1:1210.0.1.0 [2025-09-23 18:25:51.151] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:25:52.734] SBL2:1210.0.1.0 [2025-09-23 18:25:52.766] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:25:52.878] j-A [2025-09-23 18:26:00.217] The R5 Autosar Classic is running [2025-09-23 18:26:00.242] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:26:00.242] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:26:00.850] INIT: version 2.96 booting [2025-09-23 18:26:00.961] INIT: Entering runlevel: 5 [2025-09-23 18:26:01.121] mtd24 attached [2025-09-23 18:26:01.121] mtd28 attached [2025-09-23 18:26:01.137] mtd32 attached [2025-09-23 18:26:01.185] RTNETLINK answers: File exists [2025-09-23 18:26:01.247] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:26:01.247] ubi0:textures is mounted. [2025-09-23 18:26:01.247] ubi1:animations is mounted. [2025-09-23 18:26:01.247] ubi2:dml_code is mounted. [2025-09-23 18:26:01.248] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:26:01.248] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:26:01.248] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:26:01.248] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:26:01.248] data.LB_FadeInType0=100 [2025-09-23 18:26:01.248] data.CHLH_FadeInType0=0 [2025-09-23 18:26:01.248] data.WU_FadeInDelay=0 [2025-09-23 18:26:01.248] max_time_out=0 [2025-09-23 18:26:01.248] No splash screen [2025-09-23 18:26:01.248] stop dss Done [2025-09-23 18:26:01.329] /dev/mem opened. [2025-09-23 18:26:01.329] Memory mapped at address 0xffffa8cad000. [2025-09-23 18:26:01.329] Read at address 0x00600018 (0xffffa8cad018): 0x00000000 [2025-09-23 18:26:01.329] Write at address 0x00600018 (0xffffa8cad018): 0x00400040, readback 0x00400040 [2025-09-23 18:26:01.329] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:26:01.329] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:26:01.505] Loaded PowerVR consumer services. [2025-09-23 18:26:01.521] 512+0 records in [2025-09-23 18:26:01.521] 512+0 records out [2025-09-23 18:26:01.585] Starting syslogd/klogd: Waiting data available... [2025-09-23 18:26:01.601] done [2025-09-23 18:26:01.617] DML Start [2025-09-23 18:26:01.761] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:26:01.985] DML res1: 0 [2025-09-23 18:26:02.503] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:26:02.503] Read Success [2025-09-23 18:26:02.503] Verifying certificate... [2025-09-23 18:26:02.744] Verified OK [2025-09-23 18:26:02.759] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:26:04.516] Verified OK [2025-09-23 18:26:04.516] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:26:05.059] Verified OK [2025-09-23 18:26:05.059] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:26:07.603] fs.protected_hardlinks = 1 [2025-09-23 18:26:07.603] fs.protected_symlinks = 1 [2025-09-23 18:26:07.619] kernel.modules_disabled = 1 [2025-09-23 18:26:07.810] [2025-09-23 18:26:07.810] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:26:09.103] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:26:16.852] SBL1:1210.0.1.0 [2025-09-23 18:26:16.900] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:26:18.467] SBL2:1210.0.1.0 [2025-09-23 18:26:18.498] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 18:26:18.610] j-A [2025-09-23 18:26:25.983] The R5 Autosar Classic is running [2025-09-23 18:26:25.983] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:26:25.983] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:26:26.590] INIT: version 2.96 booting [2025-09-23 18:26:26.702] INIT: Entering runlevel: 5 [2025-09-23 18:26:26.846] mtd28 attached [2025-09-23 18:26:26.862] mtd24 attached [2025-09-23 18:26:26.862] mtd32 attached [2025-09-23 18:26:26.910] ubi0:animations is mounted. [2025-09-23 18:26:26.926] RTNETLINK answers: File exists [2025-09-23 18:26:26.978] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:26:26.978] ubi1:textures is mounted. [2025-09-23 18:26:26.978] ubi2:dml_code is mounted. [2025-09-23 18:26:26.978] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:26:26.978] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:26:26.978] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:26:26.978] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:26:26.978] data.LB_FadeInType0=100 [2025-09-23 18:26:26.978] data.CHLH_FadeInType0=0 [2025-09-23 18:26:26.978] data.WU_FadeInDelay=0 [2025-09-23 18:26:26.978] max_time_out=0 [2025-09-23 18:26:26.978] No splash screen [2025-09-23 18:26:26.978] stop dss Done [2025-09-23 18:26:27.057] /dev/mem opened. [2025-09-23 18:26:27.057] Memory mapped at address 0xffff886f9000. [2025-09-23 18:26:27.057] Read at address 0x00600018 (0xffff886f9018): 0x00000000 [2025-09-23 18:26:27.057] Write at address 0x00600018 (0xffff886f9018): 0x00400040, readback 0x00400040 [2025-09-23 18:26:27.057] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:26:27.057] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:26:27.250] Loaded PowerVR consumer services. [2025-09-23 18:26:27.282] 512+0 records in [2025-09-23 18:26:27.282] 512+0 records out [2025-09-23 18:26:27.297] Starting syslogd/klogd: done [2025-09-23 18:26:27.377] Waiting data available... [2025-09-23 18:26:27.377] DML Start [2025-09-23 18:26:27.569] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:26:27.793] DML res1: 0 [2025-09-23 18:26:28.202] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:26:28.202] Read Success [2025-09-23 18:26:28.202] Verifying certificate... [2025-09-23 18:26:28.522] Verified OK [2025-09-23 18:26:28.554] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:26:30.194] Verified OK [2025-09-23 18:26:30.194] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:26:30.802] Verified OK [2025-09-23 18:26:30.818] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:26:33.441] fs.protected_hardlinks = 1 [2025-09-23 18:26:33.457] fs.protected_symlinks = 1 [2025-09-23 18:26:33.457] kernel.modules_disabled = 1 [2025-09-23 18:26:33.648] [2025-09-23 18:26:33.648] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:26:34.825] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:26:42.573] SBL1:1210.0.1.0 [2025-09-23 18:26:42.621] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:26:44.188] SBL2:1210.0.1.0 [2025-09-23 18:26:44.236] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:26:44.332] j-A [2025-09-23 18:26:51.687] The R5 Autosar Classic is running [2025-09-23 18:26:51.687] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:26:51.708] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:26:52.315] INIT: version 2.96 booting [2025-09-23 18:26:52.410] INIT: Entering runlevel: 5 [2025-09-23 18:26:52.571] mtd32 attached [2025-09-23 18:26:52.587] mtd28 attached [2025-09-23 18:26:52.587] mtd24 attached [2025-09-23 18:26:52.635] ubi0:dml_code is mounted. [2025-09-23 18:26:52.651] RTNETLINK answers: File exists [2025-09-23 18:26:52.651] ubi2:textures is mounted. [2025-09-23 18:26:52.673] ubi1:animations is mounted. [2025-09-23 18:26:52.673] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:26:52.673] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:26:52.673] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:26:52.705] data.LB_FadeInType0=100 [2025-09-23 18:26:52.705] data.CHLH_FadeInType0=0 [2025-09-23 18:26:52.705] data.WU_FadeInDelay=0 [2025-09-23 18:26:52.705] max_time_out=0 [2025-09-23 18:26:52.705] No splash screen [2025-09-23 18:26:52.705] stop dss Done [2025-09-23 18:26:52.705] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:26:52.705] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:26:52.780] /dev/mem opened. [2025-09-23 18:26:52.780] Memory mapped at address 0xffffb3950000. [2025-09-23 18:26:52.780] Read at address 0x00600018 (0xffffb3950018): 0x00000000 [2025-09-23 18:26:52.780] Write at address 0x00600018 (0xffffb3950018): 0x00400040, readback 0x00400040 [2025-09-23 18:26:52.780] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:26:52.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:26:52.892] Loaded PowerVR consumer services. [2025-09-23 18:26:53.018] Waiting data available... [2025-09-23 18:26:53.018] 512+0 records in [2025-09-23 18:26:53.018] 512+0 records out [2025-09-23 18:26:53.050] Starting syslogd/klogd: done [2025-09-23 18:26:53.066] DML Start [2025-09-23 18:26:53.243] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:26:53.451] DML res1: 0 [2025-09-23 18:26:54.021] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:26:54.021] Read Success [2025-09-23 18:26:54.021] Verifying certificate... [2025-09-23 18:26:54.262] Verified OK [2025-09-23 18:26:54.278] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:26:55.940] Verified OK [2025-09-23 18:26:55.961] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:26:56.467] Verified OK [2025-09-23 18:26:56.467] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:26:59.026] fs.protected_hardlinks = 1 [2025-09-23 18:26:59.026] fs.protected_symlinks = 1 [2025-09-23 18:26:59.042] kernel.modules_disabled = 1 [2025-09-23 18:26:59.234] [2025-09-23 18:26:59.234] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:27:00.574] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:27:08.325] SBL1:1210.0.1.0 [2025-09-23 18:27:08.357] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:27:09.940] SBL2:1210.0.1.0 [2025-09-23 18:27:09.972] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:27:10.067] j-A [2025-09-23 18:27:17.421] The R5 Autosar Classic is running [2025-09-23 18:27:17.446] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:27:17.446] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:27:18.054] INIT: version 2.96 booting [2025-09-23 18:27:18.165] INIT: Entering runlevel: 5 [2025-09-23 18:27:18.325] mtd28 attached [2025-09-23 18:27:18.325] mtd32 attached [2025-09-23 18:27:18.341] mtd24 attached [2025-09-23 18:27:18.389] RTNETLINK answers: File exists [2025-09-23 18:27:18.389] ubi0:animations is mounted. [2025-09-23 18:27:18.429] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:27:18.429] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:27:18.429] ubi2:textures is mounted. [2025-09-23 18:27:18.429] ubi1:dml_code is mounted. [2025-09-23 18:27:18.429] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:27:18.429] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:27:18.429] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:27:18.445] data.LB_FadeInType0=100 [2025-09-23 18:27:18.445] data.CHLH_FadeInType0=0 [2025-09-23 18:27:18.466] data.WU_FadeInDelay=0 [2025-09-23 18:27:18.466] max_time_out=0 [2025-09-23 18:27:18.466] No splash screen [2025-09-23 18:27:18.466] stop dss Done [2025-09-23 18:27:18.498] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:27:18.498] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:27:18.537] /dev/mem opened. [2025-09-23 18:27:18.537] Memory mapped at address 0xffffaa9e8000. [2025-09-23 18:27:18.537] Read at address 0x00600018 (0xffffaa9e8018): 0x00000000 [2025-09-23 18:27:18.537] Write at address 0x00600018 (0xffffaa9e8018): 0x00400040, readback 0x00400040 [2025-09-23 18:27:18.712] Loaded PowerVR consumer services. [2025-09-23 18:27:18.712] 512+0 records in [2025-09-23 18:27:18.728] 512+0 records out [2025-09-23 18:27:18.744] Starting syslogd/klogd: done [2025-09-23 18:27:18.872] Waiting data available... [2025-09-23 18:27:18.872] DML Start [2025-09-23 18:27:19.096] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:27:19.320] DML res1: 0 [2025-09-23 18:27:19.879] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:27:19.900] Read Success [2025-09-23 18:27:19.900] Verifying certificate... [2025-09-23 18:27:20.300] Verified OK [2025-09-23 18:27:20.317] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:27:22.307] Verified OK [2025-09-23 18:27:22.307] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:27:22.755] Verified OK [2025-09-23 18:27:22.755] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:27:25.137] fs.protected_hardlinks = 1 [2025-09-23 18:27:25.137] fs.protected_symlinks = 1 [2025-09-23 18:27:25.153] kernel.modules_disabled = 1 [2025-09-23 18:27:25.329] [2025-09-23 18:27:25.329] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:27:26.300] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:27:34.047] SBL1:1210.0.1.0 [2025-09-23 18:27:34.095] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:27:35.662] SBL2:1210.0.1.0 [2025-09-23 18:27:35.693] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:27:35.806] j-A [2025-09-23 18:27:43.181] The R5 Autosar Classic is running [2025-09-23 18:27:43.181] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:27:43.181] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:27:43.788] INIT: version 2.96 booting [2025-09-23 18:27:43.900] INIT: Entering runlevel: 5 [2025-09-23 18:27:44.060] mtd32 attached [2025-09-23 18:27:44.060] mtd28 attached [2025-09-23 18:27:44.076] mtd24 attached [2025-09-23 18:27:44.123] RTNETLINK answers: File exists [2025-09-23 18:27:44.123] ubi0:dml_code is mounted. [2025-09-23 18:27:44.180] ubi1:animations is mounted. [2025-09-23 18:27:44.180] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:27:44.180] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:27:44.180] ubi2:textures is mounted. [2025-09-23 18:27:44.180] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:27:44.180] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:27:44.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:27:44.180] data.LB_FadeInType0=100 [2025-09-23 18:27:44.180] data.CHLH_FadeInType0=0 [2025-09-23 18:27:44.180] data.WU_FadeInDelay=0 [2025-09-23 18:27:44.180] max_time_out=0 [2025-09-23 18:27:44.180] No splash screen [2025-09-23 18:27:44.180] stop dss Done [2025-09-23 18:27:44.211] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:27:44.233] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:27:44.265] /dev/mem opened. [2025-09-23 18:27:44.265] Memory mapped at address 0xffffb0090000. [2025-09-23 18:27:44.265] Read at address 0x00600018 (0xffffb0090018): 0x00000000 [2025-09-23 18:27:44.265] Write at address 0x00600018 (0xffffb0090018): 0x00400040, readback 0x00400040 [2025-09-23 18:27:44.410] Loaded PowerVR consumer services. [2025-09-23 18:27:44.474] 512+0 records in [2025-09-23 18:27:44.474] 512+0 records out [2025-09-23 18:27:44.506] Waiting data available... [2025-09-23 18:27:44.521] Starting syslogd/klogd: done [2025-09-23 18:27:44.553] DML Start [2025-09-23 18:27:44.761] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:27:44.969] DML res1: 0 [2025-09-23 18:27:45.410] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:27:45.410] Read Success [2025-09-23 18:27:45.410] Verifying certificate... [2025-09-23 18:27:45.667] Verified OK [2025-09-23 18:27:45.683] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:27:47.342] Verified OK [2025-09-23 18:27:47.342] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:27:47.954] Verified OK [2025-09-23 18:27:47.954] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:27:50.512] fs.protected_hardlinks = 1 [2025-09-23 18:27:50.543] fs.protected_symlinks = 1 [2025-09-23 18:27:50.543] kernel.modules_disabled = 1 [2025-09-23 18:27:50.735] [2025-09-23 18:27:50.735] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:27:52.070] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:27:59.765] SBL1:1210.0.1.0 [2025-09-23 18:27:59.797] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:28:01.379] SBL2:1210.0.1.0 [2025-09-23 18:28:01.411] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:28:01.524] j-A [2025-09-23 18:28:08.894] The R5 Autosar Classic is running [2025-09-23 18:28:08.894] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:28:08.894] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:28:09.502] INIT: version 2.96 booting [2025-09-23 18:28:09.614] INIT: Entering runlevel: 5 [2025-09-23 18:28:09.758] mtd24 attached [2025-09-23 18:28:09.774] mtd32 attached [2025-09-23 18:28:09.806] mtd28 attached [2025-09-23 18:28:09.822] ubi0:textures is mounted. [2025-09-23 18:28:09.822] ubi1:dml_code is mounted. [2025-09-23 18:28:09.838] RTNETLINK answers: File exists [2025-09-23 18:28:09.900] ubi2:animations is mounted. [2025-09-23 18:28:09.900] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:28:09.900] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:28:09.900] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:28:09.900] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:28:09.900] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:28:09.900] data.LB_FadeInType0=100 [2025-09-23 18:28:09.900] data.CHLH_FadeInType0=0 [2025-09-23 18:28:09.900] data.WU_FadeInDelay=0 [2025-09-23 18:28:09.900] max_time_out=0 [2025-09-23 18:28:09.900] No splash screen [2025-09-23 18:28:09.900] stop dss Done [2025-09-23 18:28:09.932] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:28:09.968] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:28:09.968] /dev/mem opened. [2025-09-23 18:28:09.968] Memory mapped at address 0xffff889d1000. [2025-09-23 18:28:09.968] Read at address 0x00600018 (0xffff889d1018): 0x00000000 [2025-09-23 18:28:09.968] Write at address 0x00600018 (0xffff889d1018): 0x00400040, readback 0x00400040 [2025-09-23 18:28:10.048] Loaded PowerVR consumer services. [2025-09-23 18:28:10.207] Waiting data available... [2025-09-23 18:28:10.207] 512+0 records in [2025-09-23 18:28:10.207] 512+0 records out [2025-09-23 18:28:10.222] Starting syslogd/klogd: done [2025-09-23 18:28:10.238] DML Start [2025-09-23 18:28:10.447] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:28:10.670] DML res1: 0 [2025-09-23 18:28:11.038] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:28:11.054] Read Success [2025-09-23 18:28:11.054] Verifying certificate... [2025-09-23 18:28:11.262] Verified OK [2025-09-23 18:28:11.278] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:28:12.854] Verified OK [2025-09-23 18:28:12.854] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:28:13.425] Verified OK [2025-09-23 18:28:13.425] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:28:16.207] fs.protected_hardlinks = 1 [2025-09-23 18:28:16.207] fs.protected_symlinks = 1 [2025-09-23 18:28:16.222] kernel.modules_disabled = 1 [2025-09-23 18:28:16.431] [2025-09-23 18:28:16.431] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:28:17.835] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:28:25.496] SBL1:1210.0.1.0 [2025-09-23 18:28:25.544] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:28:27.111] SBL2:1210.0.1.0 [2025-09-23 18:28:27.143] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:28:27.255] j-A [2025-09-23 18:28:34.628] The R5 Autosar Classic is running [2025-09-23 18:28:34.628] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:28:34.628] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:28:35.235] INIT: version 2.96 booting [2025-09-23 18:28:35.347] INIT: Entering runlevel: 5 [2025-09-23 18:28:35.491] mtd32 attached [2025-09-23 18:28:35.507] mtd24 attached [2025-09-23 18:28:35.523] mtd28 attached [2025-09-23 18:28:35.570] ubi0:dml_code is mounted. [2025-09-23 18:28:35.570] RTNETLINK answers: File exists [2025-09-23 18:28:35.606] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:28:35.606] ubi1:textures is mounted. [2025-09-23 18:28:35.606] ubi2:animations is mounted. [2025-09-23 18:28:35.606] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:28:35.606] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:28:35.606] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:28:35.606] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:28:35.633] data.LB_FadeInType0=100 [2025-09-23 18:28:35.633] data.CHLH_FadeInType0=0 [2025-09-23 18:28:35.633] data.WU_FadeInDelay=0 [2025-09-23 18:28:35.633] max_time_out=0 [2025-09-23 18:28:35.633] No splash screen [2025-09-23 18:28:35.633] stop dss Done [2025-09-23 18:28:35.665] /dev/mem opened. [2025-09-23 18:28:35.698] Memory mapped at address 0xffffaed29000. [2025-09-23 18:28:35.698] Read at address 0x00600018 (0xffffaed29018): 0x00000000 [2025-09-23 18:28:35.698] Write at address 0x00600018 (0xffffaed29018): 0x00400040, readback 0x00400040 [2025-09-23 18:28:35.698] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:28:35.698] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:28:35.890] Loaded PowerVR consumer services. [2025-09-23 18:28:35.947] Waiting data available... [2025-09-23 18:28:35.947] 512+0 records in [2025-09-23 18:28:35.947] 512+0 records out [2025-09-23 18:28:35.963] Starting syslogd/klogd: done [2025-09-23 18:28:35.979] DML Start [2025-09-23 18:28:36.186] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:28:36.442] DML res1: 0 [2025-09-23 18:28:36.760] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:28:36.760] Read Success [2025-09-23 18:28:36.760] Verifying certificate... [2025-09-23 18:28:37.048] Verified OK [2025-09-23 18:28:37.064] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:28:38.710] Verified OK [2025-09-23 18:28:38.731] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:28:39.403] Verified OK [2025-09-23 18:28:39.403] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:28:42.089] fs.protected_hardlinks = 1 [2025-09-23 18:28:42.089] fs.protected_symlinks = 1 [2025-09-23 18:28:42.106] kernel.modules_disabled = 1 [2025-09-23 18:28:42.297] [2025-09-23 18:28:42.297] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:28:43.485] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:28:51.223] SBL1:1210.0.1.0 [2025-09-23 18:28:51.255] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:28:52.838] SBL2:1210.0.1.0 [2025-09-23 18:28:52.870] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:28:52.981] j-A [2025-09-23 18:29:00.321] The R5 Autosar Classic is running [2025-09-23 18:29:00.346] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:29:00.346] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:29:00.953] INIT: version 2.96 booting [2025-09-23 18:29:01.066] INIT: Entering runlevel: 5 [2025-09-23 18:29:01.225] mtd28 attached [2025-09-23 18:29:01.226] mtd24 attached [2025-09-23 18:29:01.241] mtd32 attached [2025-09-23 18:29:01.289] ubi0:animations is mounted. [2025-09-23 18:29:01.289] RTNETLINK answers: File exists [2025-09-23 18:29:01.306] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:29:01.306] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:29:01.338] ubi1:textures is mounted. [2025-09-23 18:29:01.338] ubi2:dml_code is mounted. [2025-09-23 18:29:01.338] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:29:01.338] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:29:01.338] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:29:01.338] data.LB_FadeInType0=100 [2025-09-23 18:29:01.359] data.CHLH_FadeInType0=0 [2025-09-23 18:29:01.359] data.WU_FadeInDelay=0 [2025-09-23 18:29:01.359] max_time_out=0 [2025-09-23 18:29:01.359] No splash screen [2025-09-23 18:29:01.359] stop dss Done [2025-09-23 18:29:01.385] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:29:01.385] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:29:01.436] /dev/mem opened. [2025-09-23 18:29:01.436] Memory mapped at address 0xffff9e897000. [2025-09-23 18:29:01.436] Read at address 0x00600018 (0xffff9e897018): 0x00000000 [2025-09-23 18:29:01.436] Write at address 0x00600018 (0xffff9e897018): 0x00400040, readback 0x00400040 [2025-09-23 18:29:01.628] Loaded PowerVR consumer services. [2025-09-23 18:29:01.677] 512+0 records in [2025-09-23 18:29:01.677] 512+0 records out [2025-09-23 18:29:01.693] Waiting data available... [2025-09-23 18:29:01.724] Starting syslogd/klogd: done [2025-09-23 18:29:01.740] DML Start [2025-09-23 18:29:01.916] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:29:02.172] DML res1: 0 [2025-09-23 18:29:02.571] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:29:02.571] Read Success [2025-09-23 18:29:02.587] Verifying certificate... [2025-09-23 18:29:02.843] Verified OK [2025-09-23 18:29:02.859] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:29:04.641] Verified OK [2025-09-23 18:29:04.641] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:29:05.152] Verified OK [2025-09-23 18:29:05.152] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:29:07.821] fs.protected_hardlinks = 1 [2025-09-23 18:29:07.821] fs.protected_symlinks = 1 [2025-09-23 18:29:07.821] kernel.modules_disabled = 1 [2025-09-23 18:29:08.013] [2025-09-23 18:29:08.013] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:29:09.252] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:29:16.933] SBL1:1210.0.1.0 [2025-09-23 18:29:16.965] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:29:18.548] SBL2:1210.0.1.0 [2025-09-23 18:29:18.580] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:29:18.692] j-A [2025-09-23 18:29:26.062] The R5 Autosar Classic is running [2025-09-23 18:29:26.062] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:29:26.062] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:29:26.671] INIT: version 2.96 booting [2025-09-23 18:29:26.782] INIT: Entering runlevel: 5 [2025-09-23 18:29:26.943] mtd28 attached [2025-09-23 18:29:26.943] mtd24 attached [2025-09-23 18:29:26.958] mtd32 attached [2025-09-23 18:29:26.990] ubi0:animations is mounted. [2025-09-23 18:29:27.006] RTNETLINK answers: File exists [2025-09-23 18:29:27.066] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:29:27.066] ubi1:textures is mounted. [2025-09-23 18:29:27.066] ubi2:dml_code is mounted. [2025-09-23 18:29:27.066] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:29:27.066] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:29:27.066] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:29:27.066] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:29:27.066] data.LB_FadeInType0=100 [2025-09-23 18:29:27.066] data.CHLH_FadeInType0=0 [2025-09-23 18:29:27.066] data.WU_FadeInDelay=0 [2025-09-23 18:29:27.066] max_time_out=0 [2025-09-23 18:29:27.066] No splash screen [2025-09-23 18:29:27.066] stop dss Done [2025-09-23 18:29:27.146] /dev/mem opened. [2025-09-23 18:29:27.146] Memory mapped at address 0xffffa99a7000. [2025-09-23 18:29:27.146] Read at address 0x00600018 (0xffffa99a7018): 0x00000000 [2025-09-23 18:29:27.146] Write at address 0x00600018 (0xffffa99a7018): 0x00400040, readback 0x00400040 [2025-09-23 18:29:27.146] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:29:27.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:29:27.242] Loaded PowerVR consumer services. [2025-09-23 18:29:27.370] Waiting data available... [2025-09-23 18:29:27.370] 512+0 records in [2025-09-23 18:29:27.370] 512+0 records out [2025-09-23 18:29:27.418] Starting syslogd/klogd: done [2025-09-23 18:29:27.434] DML Start [2025-09-23 18:29:27.626] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:29:27.850] DML res1: 0 [2025-09-23 18:29:28.293] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:29:28.293] Read Success [2025-09-23 18:29:28.293] Verifying certificate... [2025-09-23 18:29:28.549] Verified OK [2025-09-23 18:29:28.565] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:29:30.277] Verified OK [2025-09-23 18:29:30.293] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:29:30.901] Verified OK [2025-09-23 18:29:30.901] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:29:33.523] fs.protected_hardlinks = 1 [2025-09-23 18:29:33.538] fs.protected_symlinks = 1 [2025-09-23 18:29:33.538] kernel.modules_disabled = 1 [2025-09-23 18:29:33.730] [2025-09-23 18:29:33.730] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:29:34.897] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:29:42.662] SBL1:1210.0.1.0 [2025-09-23 18:29:42.694] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:29:44.277] SBL2:1210.0.1.0 [2025-09-23 18:29:44.309] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:29:44.405] j-A [2025-09-23 18:29:51.760] The R5 Autosar Classic is running [2025-09-23 18:29:51.784] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:29:51.784] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:29:52.392] INIT: version 2.96 booting [2025-09-23 18:29:52.504] INIT: Entering runlevel: 5 [2025-09-23 18:29:52.648] mtd28 attached [2025-09-23 18:29:52.664] mtd24 attached [2025-09-23 18:29:52.680] mtd32 attached [2025-09-23 18:29:52.712] ubi0:animations is mounted. [2025-09-23 18:29:52.728] ubi1:textures is mounted. [2025-09-23 18:29:52.728] RTNETLINK answers: File exists [2025-09-23 18:29:52.784] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:29:52.784] ubi2:dml_code is mounted. [2025-09-23 18:29:52.784] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:29:52.784] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:29:52.784] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:29:52.784] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:29:52.784] data.LB_FadeInType0=100 [2025-09-23 18:29:52.784] data.CHLH_FadeInType0=0 [2025-09-23 18:29:52.784] data.WU_FadeInDelay=0 [2025-09-23 18:29:52.784] max_time_out=0 [2025-09-23 18:29:52.784] No splash screen [2025-09-23 18:29:52.784] stop dss Done [2025-09-23 18:29:52.832] /dev/mem opened. [2025-09-23 18:29:52.832] Memory mapped at address 0xffffb625c000. [2025-09-23 18:29:52.875] Read at address 0x00600018 (0xffffb625c018): 0x00000000 [2025-09-23 18:29:52.875] Write at address 0x00600018 (0xffffb625c018): 0x00400040, readback 0x00400040 [2025-09-23 18:29:52.875] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:29:52.875] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:29:53.035] Loaded PowerVR consumer services. [2025-09-23 18:29:53.051] 512+0 records in [2025-09-23 18:29:53.051] 512+0 records out [2025-09-23 18:29:53.099] Waiting data available... [2025-09-23 18:29:53.115] Starting syslogd/klogd: done [2025-09-23 18:29:53.130] DML Start [2025-09-23 18:29:53.323] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:29:53.531] DML res1: 0 [2025-09-23 18:29:54.002] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:29:54.002] Read Success [2025-09-23 18:29:54.002] Verifying certificate... [2025-09-23 18:29:54.225] Verified OK [2025-09-23 18:29:54.241] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:29:55.959] Verified OK [2025-09-23 18:29:55.959] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:29:56.558] Verified OK [2025-09-23 18:29:56.558] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:29:59.053] fs.protected_hardlinks = 1 [2025-09-23 18:29:59.068] fs.protected_symlinks = 1 [2025-09-23 18:29:59.068] kernel.modules_disabled = 1 [2025-09-23 18:29:59.260] [2025-09-23 18:29:59.260] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:30:00.640] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:30:08.375] SBL1:1210.0.1.0 [2025-09-23 18:30:08.407] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:30:09.990] SBL2:1210.0.1.0 [2025-09-23 18:30:10.022] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:30:10.135] j-A [2025-09-23 18:30:17.474] The R5 Autosar Classic is running [2025-09-23 18:30:17.499] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:30:17.499] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:30:18.106] INIT: version 2.96 booting [2025-09-23 18:30:18.218] INIT: Entering runlevel: 5 [2025-09-23 18:30:18.378] mtd28 attached [2025-09-23 18:30:18.394] mtd32 attached [2025-09-23 18:30:18.394] mtd24 attached [2025-09-23 18:30:18.442] RTNETLINK answers: File exists [2025-09-23 18:30:18.513] ubi0:animations is mounted. [2025-09-23 18:30:18.513] ubi1:dml_code is mounted. [2025-09-23 18:30:18.513] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:30:18.513] ubi2:textures is mounted. [2025-09-23 18:30:18.513] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:30:18.513] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:30:18.513] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:30:18.513] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:30:18.513] data.LB_FadeInType0=100 [2025-09-23 18:30:18.513] data.CHLH_FadeInType0=0 [2025-09-23 18:30:18.513] data.WU_FadeInDelay=0 [2025-09-23 18:30:18.513] max_time_out=0 [2025-09-23 18:30:18.513] No splash screen [2025-09-23 18:30:18.513] stop dss Done [2025-09-23 18:30:18.529] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:30:18.545] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:30:18.595] /dev/mem opened. [2025-09-23 18:30:18.595] Memory mapped at address 0xffffb9e93000. [2025-09-23 18:30:18.595] Read at address 0x00600018 (0xffffb9e93018): 0x00000000 [2025-09-23 18:30:18.595] Write at address 0x00600018 (0xffffb9e93018): 0x00400040, readback 0x00400040 [2025-09-23 18:30:18.756] Loaded PowerVR consumer services. [2025-09-23 18:30:18.804] 512+0 records in [2025-09-23 18:30:18.804] 512+0 records out [2025-09-23 18:30:18.819] Waiting data available... [2025-09-23 18:30:18.852] Starting syslogd/klogd: done [2025-09-23 18:30:18.868] DML Start [2025-09-23 18:30:19.044] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:30:19.252] DML res1: 0 [2025-09-23 18:30:19.746] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:30:19.746] Read Success [2025-09-23 18:30:19.746] Verifying certificate... [2025-09-23 18:30:19.970] Verified OK [2025-09-23 18:30:19.986] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:30:21.628] Verified OK [2025-09-23 18:30:21.628] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:30:22.155] Verified OK [2025-09-23 18:30:22.155] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:30:24.905] fs.protected_hardlinks = 1 [2025-09-23 18:30:24.905] fs.protected_symlinks = 1 [2025-09-23 18:30:24.921] kernel.modules_disabled = 1 [2025-09-23 18:30:25.097] [2025-09-23 18:30:25.097] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:30:26.374] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:30:34.096] SBL1:1210.0.1.0 [2025-09-23 18:30:34.128] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:30:35.710] SBL2:1210.0.1.0 [2025-09-23 18:30:35.742] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:30:35.855] j-A [2025-09-23 18:30:43.226] The R5 Autosar Classic is running [2025-09-23 18:30:43.226] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:30:43.226] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:30:43.834] INIT: version 2.96 booting [2025-09-23 18:30:43.945] INIT: Entering runlevel: 5 [2025-09-23 18:30:44.105] mtd28 attached [2025-09-23 18:30:44.105] mtd24 attached [2025-09-23 18:30:44.121] mtd32 attached [2025-09-23 18:30:44.137] ubi0:animations is mounted. [2025-09-23 18:30:44.169] RTNETLINK answers: File exists [2025-09-23 18:30:44.169] ubi1:textures is mounted. [2025-09-23 18:30:44.226] ubi2:dml_code is mounted. [2025-09-23 18:30:44.226] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:30:44.226] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:30:44.226] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:30:44.226] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:30:44.226] data.LB_FadeInType0=100 [2025-09-23 18:30:44.226] data.CHLH_FadeInType0=0 [2025-09-23 18:30:44.226] data.WU_FadeInDelay=0 [2025-09-23 18:30:44.226] max_time_out=0 [2025-09-23 18:30:44.226] No splash screen [2025-09-23 18:30:44.226] stop dss Done [2025-09-23 18:30:44.226] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:30:44.298] /dev/mem opened. [2025-09-23 18:30:44.298] Memory mapped at address 0xffff9b9f3000. [2025-09-23 18:30:44.298] Read at address 0x00600018 (0xffff9b9f3018): 0x00000000 [2025-09-23 18:30:44.298] Write at address 0x00600018 (0xffff9b9f3018): 0x00400040, readback 0x00400040 [2025-09-23 18:30:44.298] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:30:44.314] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:30:44.491] Loaded PowerVR consumer services. [2025-09-23 18:30:44.523] 512+0 records in [2025-09-23 18:30:44.523] 512+0 records out [2025-09-23 18:30:44.570] Waiting data available... [2025-09-23 18:30:44.570] Starting syslogd/klogd: done [2025-09-23 18:30:44.586] DML Start [2025-09-23 18:30:44.778] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:30:45.002] DML res1: 0 [2025-09-23 18:30:45.479] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:30:45.479] Read Success [2025-09-23 18:30:45.479] Verifying certificate... [2025-09-23 18:30:45.767] Verified OK [2025-09-23 18:30:45.783] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:30:47.504] Verified OK [2025-09-23 18:30:47.504] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:30:48.064] Verified OK [2025-09-23 18:30:48.064] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:30:50.558] fs.protected_hardlinks = 1 [2025-09-23 18:30:50.574] fs.protected_symlinks = 1 [2025-09-23 18:30:50.574] kernel.modules_disabled = 1 [2025-09-23 18:30:50.766] [2025-09-23 18:30:50.766] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:30:52.101] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:30:59.814] SBL1:1210.0.1.0 [2025-09-23 18:30:59.861] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:31:01.428] SBL2:1210.0.1.0 [2025-09-23 18:31:01.460] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:31:01.573] j-A [2025-09-23 18:31:08.946] The R5 Autosar Classic is running [2025-09-23 18:31:08.946] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:31:08.946] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:31:09.554] INIT: version 2.96 booting [2025-09-23 18:31:09.665] INIT: Entering runlevel: 5 [2025-09-23 18:31:09.825] mtd32 attached [2025-09-23 18:31:09.841] mtd28 attached [2025-09-23 18:31:09.841] mtd24 attached [2025-09-23 18:31:09.889] ubi0:dml_code is mounted. [2025-09-23 18:31:09.889] RTNETLINK answers: File exists [2025-09-23 18:31:09.905] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:31:09.905] ubi2:textures is mounted. [2025-09-23 18:31:09.933] ubi1:animations is mounted. [2025-09-23 18:31:09.933] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:31:09.933] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:31:09.933] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:31:09.933] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:31:09.959] data.LB_FadeInType0=100 [2025-09-23 18:31:09.959] data.CHLH_FadeInType0=0 [2025-09-23 18:31:09.959] data.WU_FadeInDelay=0 [2025-09-23 18:31:09.959] max_time_out=0 [2025-09-23 18:31:09.959] No splash screen [2025-09-23 18:31:09.959] stop dss Done [2025-09-23 18:31:09.991] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:31:10.034] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:31:10.034] /dev/mem opened. [2025-09-23 18:31:10.034] Memory mapped at address 0xffff98275000. [2025-09-23 18:31:10.034] Read at address 0x00600018 (0xffff98275018): 0x00000000 [2025-09-23 18:31:10.034] Write at address 0x00600018 (0xffff98275018): 0x00400040, readback 0x00400040 [2025-09-23 18:31:10.209] Loaded PowerVR consumer services. [2025-09-23 18:31:10.257] 512+0 records in [2025-09-23 18:31:10.257] 512+0 records out [2025-09-23 18:31:10.273] Waiting data available... [2025-09-23 18:31:10.288] Starting syslogd/klogd: done [2025-09-23 18:31:10.304] DML Start [2025-09-23 18:31:10.480] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:31:10.705] DML res1: 0 [2025-09-23 18:31:11.169] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:31:11.185] Read Success [2025-09-23 18:31:11.185] Verifying certificate... [2025-09-23 18:31:11.424] Verified OK [2025-09-23 18:31:11.440] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:31:13.032] Verified OK [2025-09-23 18:31:13.032] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:31:13.661] Verified OK [2025-09-23 18:31:13.661] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:31:16.412] fs.protected_hardlinks = 1 [2025-09-23 18:31:16.412] fs.protected_symlinks = 1 [2025-09-23 18:31:16.427] kernel.modules_disabled = 1 [2025-09-23 18:31:16.620] [2025-09-23 18:31:16.620] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:31:17.813] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:31:25.541] SBL1:1210.0.1.0 [2025-09-23 18:31:25.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:31:27.156] SBL2:1210.0.1.0 [2025-09-23 18:31:27.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:31:27.301] j-A [2025-09-23 18:31:34.655] The R5 Autosar Classic is running [2025-09-23 18:31:34.655] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:31:34.676] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:31:35.284] INIT: version 2.96 booting [2025-09-23 18:31:35.395] INIT: Entering runlevel: 5 [2025-09-23 18:31:35.556] mtd28 attached [2025-09-23 18:31:35.556] mtd24 attached [2025-09-23 18:31:35.572] mtd32 attached [2025-09-23 18:31:35.658] RTNETLINK answers: File exists [2025-09-23 18:31:35.659] ubi0:animations is mounted. [2025-09-23 18:31:35.659] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:31:35.659] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:31:35.659] ubi1:textures is mounted. [2025-09-23 18:31:35.659] ubi2:dml_code is mounted. [2025-09-23 18:31:35.659] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:31:35.659] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:31:35.659] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:31:35.686] data.LB_FadeInType0=100 [2025-09-23 18:31:35.686] data.CHLH_FadeInType0=0 [2025-09-23 18:31:35.686] data.WU_FadeInDelay=0 [2025-09-23 18:31:35.686] max_time_out=0 [2025-09-23 18:31:35.686] No splash screen [2025-09-23 18:31:35.686] stop dss Done [2025-09-23 18:31:35.762] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:31:35.762] /dev/mem opened. [2025-09-23 18:31:35.762] Memory mapped at address 0xffff9dfba000. [2025-09-23 18:31:35.762] Read at address 0x00600018 (0xffff9dfba018): 0x00000000 [2025-09-23 18:31:35.762] Write at address 0x00600018 (0xffff9dfba018): 0x00400040, readback 0x00400040 [2025-09-23 18:31:35.762] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:31:35.938] Loaded PowerVR consumer services. [2025-09-23 18:31:35.970] 512+0 records in [2025-09-23 18:31:35.970] 512+0 records out [2025-09-23 18:31:36.034] Starting syslogd/klogd: Waiting data available... [2025-09-23 18:31:36.050] done [2025-09-23 18:31:36.050] DML Start [2025-09-23 18:31:36.225] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:31:36.450] DML res1: 0 [2025-09-23 18:31:36.952] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:31:36.952] Read Success [2025-09-23 18:31:36.952] Verifying certificate... [2025-09-23 18:31:37.191] Verified OK [2025-09-23 18:31:37.207] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:31:38.851] Verified OK [2025-09-23 18:31:38.851] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:31:39.529] Verified OK [2025-09-23 18:31:39.529] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:31:42.168] fs.protected_hardlinks = 1 [2025-09-23 18:31:42.183] fs.protected_symlinks = 1 [2025-09-23 18:31:42.199] kernel.modules_disabled = 1 [2025-09-23 18:31:42.391] [2025-09-23 18:31:42.391] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:31:43.554] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:31:51.254] SBL1:1210.0.1.0 [2025-09-23 18:31:51.285] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:31:52.868] SBL2:1210.0.1.0 [2025-09-23 18:31:52.900] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:31:53.011] j-A [2025-09-23 18:32:00.381] The R5 Autosar Classic is running [2025-09-23 18:32:00.381] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:32:00.381] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:32:00.988] INIT: version 2.96 booting [2025-09-23 18:32:01.100] INIT: Entering runlevel: 5 [2025-09-23 18:32:01.245] mtd28 attached [2025-09-23 18:32:01.260] mtd32 attached [2025-09-23 18:32:01.276] mtd24 attached [2025-09-23 18:32:01.359] ubi0:animations is mounted. [2025-09-23 18:32:01.359] RTNETLINK answers: File exists [2025-09-23 18:32:01.359] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:32:01.359] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:32:01.359] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:32:01.359] ubi2:textures is mounted. [2025-09-23 18:32:01.359] ubi1:dml_code is mounted. [2025-09-23 18:32:01.359] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:32:01.359] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:32:01.387] data.LB_FadeInType0=100 [2025-09-23 18:32:01.387] data.CHLH_FadeInType0=0 [2025-09-23 18:32:01.387] data.WU_FadeInDelay=0 [2025-09-23 18:32:01.387] max_time_out=0 [2025-09-23 18:32:01.387] No splash screen [2025-09-23 18:32:01.387] stop dss Done [2025-09-23 18:32:01.403] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:32:01.419] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:32:01.435] /dev/mem opened. [2025-09-23 18:32:01.435] Memory mapped at address 0xffff9104c000. [2025-09-23 18:32:01.461] Read at address 0x00600018 (0xffff9104c018): 0x00000000 [2025-09-23 18:32:01.461] Write at address 0x00600018 (0xffff9104c018): 0x00400040, readback 0x00400040 [2025-09-23 18:32:01.572] Loaded PowerVR consumer services. [2025-09-23 18:32:01.716] Waiting data available... [2025-09-23 18:32:01.716] 512+0 records in [2025-09-23 18:32:01.716] 512+0 records out [2025-09-23 18:32:01.732] Starting syslogd/klogd: done [2025-09-23 18:32:01.748] DML Start [2025-09-23 18:32:01.940] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:32:02.179] DML res1: 0 [2025-09-23 18:32:02.604] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:32:02.604] Read Success [2025-09-23 18:32:02.604] Verifying certificate... [2025-09-23 18:32:02.844] Verified OK [2025-09-23 18:32:02.844] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:32:04.608] Verified OK [2025-09-23 18:32:04.609] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:32:05.165] Verified OK [2025-09-23 18:32:05.165] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:32:07.660] fs.protected_hardlinks = 1 [2025-09-23 18:32:07.660] fs.protected_symlinks = 1 [2025-09-23 18:32:07.675] kernel.modules_disabled = 1 [2025-09-23 18:32:07.868] [2025-09-23 18:32:07.868] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:32:09.259] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:32:16.964] SBL1:1210.0.1.0 [2025-09-23 18:32:16.996] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:32:18.580] SBL2:1210.0.1.0 [2025-09-23 18:32:18.612] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:32:18.724] j-A [2025-09-23 18:32:26.095] The R5 Autosar Classic is running [2025-09-23 18:32:26.095] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:32:26.095] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:32:26.702] INIT: version 2.96 booting [2025-09-23 18:32:26.814] INIT: Entering runlevel: 5 [2025-09-23 18:32:26.974] mtd24 attached [2025-09-23 18:32:26.974] mtd28 attached [2025-09-23 18:32:26.990] mtd32 attached [2025-09-23 18:32:27.038] RTNETLINK answers: File exists [2025-09-23 18:32:27.038] ubi0:textures is mounted. [2025-09-23 18:32:27.097] ubi1:animations is mounted. [2025-09-23 18:32:27.097] ubi2:dml_code is mounted. [2025-09-23 18:32:27.097] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:32:27.097] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:32:27.097] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:32:27.097] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:32:27.097] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:32:27.097] data.LB_FadeInType0=100 [2025-09-23 18:32:27.097] data.CHLH_FadeInType0=0 [2025-09-23 18:32:27.097] data.WU_FadeInDelay=0 [2025-09-23 18:32:27.097] max_time_out=0 [2025-09-23 18:32:27.097] No splash screen [2025-09-23 18:32:27.097] stop dss Done [2025-09-23 18:32:27.129] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:32:27.145] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:32:27.185] /dev/mem opened. [2025-09-23 18:32:27.185] Memory mapped at address 0xffff91204000. [2025-09-23 18:32:27.185] Read at address 0x00600018 (0xffff91204018): 0x00000000 [2025-09-23 18:32:27.185] Write at address 0x00600018 (0xffff91204018): 0x00400040, readback 0x00400040 [2025-09-23 18:32:27.282] Loaded PowerVR consumer services. [2025-09-23 18:32:27.393] 512+0 records in [2025-09-23 18:32:27.393] 512+0 records out [2025-09-23 18:32:27.425] Waiting data available... [2025-09-23 18:32:27.441] Starting syslogd/klogd: done [2025-09-23 18:32:27.457] DML Start [2025-09-23 18:32:27.665] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:32:27.906] DML res1: 0 [2025-09-23 18:32:28.300] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:32:28.300] Read Success [2025-09-23 18:32:28.300] Verifying certificate... [2025-09-23 18:32:28.540] Verified OK [2025-09-23 18:32:28.556] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:32:30.266] Verified OK [2025-09-23 18:32:30.266] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:32:30.885] Verified OK [2025-09-23 18:32:30.885] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:32:33.491] fs.protected_hardlinks = 1 [2025-09-23 18:32:33.491] fs.protected_symlinks = 1 [2025-09-23 18:32:33.491] kernel.modules_disabled = 1 [2025-09-23 18:32:33.683] [2025-09-23 18:32:33.683] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:32:34.975] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:32:42.695] SBL1:1210.0.1.0 [2025-09-23 18:32:42.727] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:32:44.309] SBL2:1210.0.1.0 [2025-09-23 18:32:44.341] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:32:44.454] j-A [2025-09-23 18:32:51.792] The R5 Autosar Classic is running [2025-09-23 18:32:51.823] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:32:51.823] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:32:52.431] INIT: version 2.96 booting [2025-09-23 18:32:52.543] INIT: Entering runlevel: 5 [2025-09-23 18:32:52.686] mtd24 attached [2025-09-23 18:32:52.702] mtd28 attached [2025-09-23 18:32:52.718] mtd32 attached [2025-09-23 18:32:52.766] ubi0:textures is mounted. [2025-09-23 18:32:52.766] RTNETLINK answers: File exists [2025-09-23 18:32:52.824] ubi1:animations is mounted. [2025-09-23 18:32:52.824] ubi2:dml_code is mounted. [2025-09-23 18:32:52.824] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:32:52.824] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:32:52.824] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:32:52.824] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:32:52.824] data.LB_FadeInType0=100 [2025-09-23 18:32:52.824] data.CHLH_FadeInType0=0 [2025-09-23 18:32:52.824] data.WU_FadeInDelay=0 [2025-09-23 18:32:52.824] max_time_out=0 [2025-09-23 18:32:52.824] No splash screen [2025-09-23 18:32:52.824] stop dss Done [2025-09-23 18:32:52.824] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:32:52.892] /dev/mem opened. [2025-09-23 18:32:52.892] Memory mapped at address 0xffff9ec03000. [2025-09-23 18:32:52.892] Read at address 0x00600018 (0xffff9ec03018): 0x00000000 [2025-09-23 18:32:52.892] Write at address 0x00600018 (0xffff9ec03018): 0x00400040, readback 0x00400040 [2025-09-23 18:32:52.892] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:32:52.909] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:32:53.116] Loaded PowerVR consumer services. [2025-09-23 18:32:53.132] 512+0 records in [2025-09-23 18:32:53.132] 512+0 records out [2025-09-23 18:32:53.180] Starting syslogd/klogd: done [2025-09-23 18:32:53.196] Waiting data available... [2025-09-23 18:32:53.196] DML Start [2025-09-23 18:32:53.388] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:32:53.611] DML res1: 0 [2025-09-23 18:32:54.037] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:32:54.037] Read Success [2025-09-23 18:32:54.037] Verifying certificate... [2025-09-23 18:32:54.293] Verified OK [2025-09-23 18:32:54.309] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:32:56.082] Verified OK [2025-09-23 18:32:56.082] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:32:56.617] Verified OK [2025-09-23 18:32:56.617] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:32:59.286] fs.protected_hardlinks = 1 [2025-09-23 18:32:59.302] fs.protected_symlinks = 1 [2025-09-23 18:32:59.302] kernel.modules_disabled = 1 [2025-09-23 18:32:59.495] [2025-09-23 18:32:59.495] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:33:00.691] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:33:08.398] SBL1:1210.0.1.0 [2025-09-23 18:33:08.445] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:33:10.029] SBL2:1210.0.1.0 [2025-09-23 18:33:10.060] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:33:10.157] j-A [2025-09-23 18:33:17.512] The R5 Autosar Classic is running [2025-09-23 18:33:17.535] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:33:17.535] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:33:18.142] INIT: version 2.96 booting [2025-09-23 18:33:18.254] INIT: Entering runlevel: 5 [2025-09-23 18:33:18.414] mtd28 attached [2025-09-23 18:33:18.414] mtd32 attached [2025-09-23 18:33:18.430] mtd24 attached [2025-09-23 18:33:18.478] ubi0:animations is mounted. [2025-09-23 18:33:18.478] RTNETLINK answers: File exists [2025-09-23 18:33:18.520] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:33:18.520] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:33:18.520] ubi1:dml_code is mounted. [2025-09-23 18:33:18.520] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:33:18.520] ubi2:textures is mounted. [2025-09-23 18:33:18.520] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:33:18.520] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:33:18.543] data.LB_FadeInType0=100 [2025-09-23 18:33:18.543] data.CHLH_FadeInType0=0 [2025-09-23 18:33:18.543] data.WU_FadeInDelay=0 [2025-09-23 18:33:18.543] max_time_out=0 [2025-09-23 18:33:18.543] No splash screen [2025-09-23 18:33:18.543] stop dss Done [2025-09-23 18:33:18.591] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:33:18.625] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:33:18.625] /dev/mem opened. [2025-09-23 18:33:18.625] Memory mapped at address 0xffff9bb54000. [2025-09-23 18:33:18.625] Read at address 0x00600018 (0xffff9bb54018): 0x00000000 [2025-09-23 18:33:18.625] Write at address 0x00600018 (0xffff9bb54018): 0x00400040, readback 0x00400040 [2025-09-23 18:33:18.704] Loaded PowerVR consumer services. [2025-09-23 18:33:18.860] Waiting data available... [2025-09-23 18:33:18.860] 512+0 records in [2025-09-23 18:33:18.860] 512+0 records out [2025-09-23 18:33:18.908] Starting syslogd/klogd: done [2025-09-23 18:33:18.924] DML Start [2025-09-23 18:33:19.100] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:33:19.324] DML res1: 0 [2025-09-23 18:33:19.781] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:33:19.781] Read Success [2025-09-23 18:33:19.781] Verifying certificate... [2025-09-23 18:33:20.036] Verified OK [2025-09-23 18:33:20.052] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:33:21.629] Verified OK [2025-09-23 18:33:21.629] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:33:22.237] Verified OK [2025-09-23 18:33:22.253] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:33:24.923] fs.protected_hardlinks = 1 [2025-09-23 18:33:24.939] fs.protected_symlinks = 1 [2025-09-23 18:33:24.939] kernel.modules_disabled = 1 [2025-09-23 18:33:25.146] [2025-09-23 18:33:25.146] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:33:26.401] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:33:34.119] SBL1:1210.0.1.0 [2025-09-23 18:33:34.150] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:33:35.733] SBL2:1210.0.1.0 [2025-09-23 18:33:35.765] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 18:33:35.877] j-A [2025-09-23 18:33:43.217] The R5 Autosar Classic is running [2025-09-23 18:33:43.242] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:33:43.242] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:33:43.849] INIT: version 2.96 booting [2025-09-23 18:33:43.962] INIT: Entering runlevel: 5 [2025-09-23 18:33:44.122] mtd32 attached [2025-09-23 18:33:44.122] mtd28 attached [2025-09-23 18:33:44.138] mtd24 attached [2025-09-23 18:33:44.185] RTNETLINK answers: File exists [2025-09-23 18:33:44.185] ubi0:dml_code is mounted. [2025-09-23 18:33:44.227] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:33:44.227] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:33:44.227] ubi2:textures is mounted. [2025-09-23 18:33:44.227] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:33:44.227] ubi1:animations is mounted. [2025-09-23 18:33:44.227] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:33:44.227] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:33:44.266] data.LB_FadeInType0=100 [2025-09-23 18:33:44.266] data.CHLH_FadeInType0=0 [2025-09-23 18:33:44.266] data.WU_FadeInDelay=0 [2025-09-23 18:33:44.266] max_time_out=0 [2025-09-23 18:33:44.266] No splash screen [2025-09-23 18:33:44.266] stop dss Done [2025-09-23 18:33:44.266] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:33:44.282] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:33:44.332] /dev/mem opened. [2025-09-23 18:33:44.332] Memory mapped at address 0xffffb9cc5000. [2025-09-23 18:33:44.332] Read at address 0x00600018 (0xffffb9cc5018): 0x00000000 [2025-09-23 18:33:44.332] Write at address 0x00600018 (0xffffb9cc5018): 0x00400040, readback 0x00400040 [2025-09-23 18:33:44.396] Loaded PowerVR consumer services. [2025-09-23 18:33:44.540] 512+0 records in [2025-09-23 18:33:44.540] 512+0 records out [2025-09-23 18:33:44.540] Waiting data available... [2025-09-23 18:33:44.604] Starting syslogd/klogd: done [2025-09-23 18:33:44.620] DML Start [2025-09-23 18:33:44.812] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:33:45.067] DML res1: 0 [2025-09-23 18:33:45.479] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:33:45.479] Read Success [2025-09-23 18:33:45.479] Verifying certificate... [2025-09-23 18:33:45.783] Verified OK [2025-09-23 18:33:45.815] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:33:47.653] Verified OK [2025-09-23 18:33:47.653] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:33:48.132] Verified OK [2025-09-23 18:33:48.148] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:33:50.527] fs.protected_hardlinks = 1 [2025-09-23 18:33:50.527] fs.protected_symlinks = 1 [2025-09-23 18:33:50.527] kernel.modules_disabled = 1 [2025-09-23 18:33:50.720] [2025-09-23 18:33:50.720] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:33:52.117] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:33:59.820] SBL1:1210.0.1.0 [2025-09-23 18:33:59.868] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:34:01.434] SBL2:1210.0.1.0 [2025-09-23 18:34:01.466] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:34:01.579] j-A [2025-09-23 18:34:08.956] The R5 Autosar Classic is running [2025-09-23 18:34:08.956] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:34:08.956] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:34:09.564] INIT: version 2.96 booting [2025-09-23 18:34:09.675] INIT: Entering runlevel: 5 [2025-09-23 18:34:09.836] mtd24 attached [2025-09-23 18:34:09.852] mtd28 attached [2025-09-23 18:34:09.867] ubi0:textures is mounted. [2025-09-23 18:34:09.884] mtd32 attached [2025-09-23 18:34:09.899] ubi1:animations is mounted. [2025-09-23 18:34:09.915] RTNETLINK answers: File exists [2025-09-23 18:34:09.966] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:34:09.966] ubi2:dml_code is mounted. [2025-09-23 18:34:09.966] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:34:09.966] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:34:09.966] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:34:09.966] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:34:09.966] data.LB_FadeInType0=100 [2025-09-23 18:34:09.966] data.CHLH_FadeInType0=0 [2025-09-23 18:34:09.966] data.WU_FadeInDelay=0 [2025-09-23 18:34:09.966] max_time_out=0 [2025-09-23 18:34:09.966] No splash screen [2025-09-23 18:34:09.966] stop dss Done [2025-09-23 18:34:09.998] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:34:10.014] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:34:10.052] /dev/mem opened. [2025-09-23 18:34:10.052] Memory mapped at address 0xffffa2223000. [2025-09-23 18:34:10.052] Read at address 0x00600018 (0xffffa2223018): 0x00000000 [2025-09-23 18:34:10.052] Write at address 0x00600018 (0xffffa2223018): 0x00400040, readback 0x00400040 [2025-09-23 18:34:10.228] Loaded PowerVR consumer services. [2025-09-23 18:34:10.260] 512+0 records in [2025-09-23 18:34:10.260] 512+0 records out [2025-09-23 18:34:10.292] Starting syslogd/klogd: done [2025-09-23 18:34:10.308] Waiting data available... [2025-09-23 18:34:10.308] DML Start [2025-09-23 18:34:10.452] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:34:10.692] DML res1: 0 [2025-09-23 18:34:11.108] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:34:11.124] Read Success [2025-09-23 18:34:11.124] Verifying certificate... [2025-09-23 18:34:11.396] Verified OK [2025-09-23 18:34:11.411] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:34:13.011] Verified OK [2025-09-23 18:34:13.011] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:34:13.659] Verified OK [2025-09-23 18:34:13.659] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:34:16.265] fs.protected_hardlinks = 1 [2025-09-23 18:34:16.265] fs.protected_symlinks = 1 [2025-09-23 18:34:16.281] kernel.modules_disabled = 1 [2025-09-23 18:34:16.473] [2025-09-23 18:34:16.473] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:34:17.825] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:34:25.545] SBL1:1210.0.1.0 [2025-09-23 18:34:25.577] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:34:27.160] SBL2:1210.0.1.0 [2025-09-23 18:34:27.192] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 18:34:27.304] j-A [2025-09-23 18:34:34.645] The R5 Autosar Classic is running [2025-09-23 18:34:34.670] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:34:34.670] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:34:35.277] INIT: version 2.96 booting [2025-09-23 18:34:35.389] INIT: Entering runlevel: 5 [2025-09-23 18:34:35.549] mtd24 attached [2025-09-23 18:34:35.565] mtd32 attached [2025-09-23 18:34:35.581] ubi0:textures is mounted. [2025-09-23 18:34:35.581] mtd28 attached [2025-09-23 18:34:35.613] ubi1:dml_code is mounted. [2025-09-23 18:34:35.678] RTNETLINK answers: File exists [2025-09-23 18:34:35.678] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:34:35.678] ubi2:animations is mounted. [2025-09-23 18:34:35.678] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:34:35.678] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:34:35.678] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:34:35.678] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:34:35.678] data.LB_FadeInType0=100 [2025-09-23 18:34:35.678] data.CHLH_FadeInType0=0 [2025-09-23 18:34:35.678] data.WU_FadeInDelay=0 [2025-09-23 18:34:35.678] max_time_out=0 [2025-09-23 18:34:35.678] No splash screen [2025-09-23 18:34:35.678] stop dss Done [2025-09-23 18:34:35.725] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:34:35.762] /dev/mem opened. [2025-09-23 18:34:35.762] Memory mapped at address 0xffff808fd000. [2025-09-23 18:34:35.762] Read at address 0x00600018 (0xffff808fd018): 0x00000000 [2025-09-23 18:34:35.762] Write at address 0x00600018 (0xffff808fd018): 0x00400040, readback 0x00400040 [2025-09-23 18:34:35.762] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:34:35.827] Loaded PowerVR consumer services. [2025-09-23 18:34:35.955] 512+0 records in [2025-09-23 18:34:35.971] 512+0 records out [2025-09-23 18:34:35.986] Waiting data available... [2025-09-23 18:34:36.002] Starting syslogd/klogd: done [2025-09-23 18:34:36.018] DML Start [2025-09-23 18:34:36.226] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:34:36.450] DML res1: 0 [2025-09-23 18:34:36.816] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:34:36.816] Read Success [2025-09-23 18:34:36.816] Verifying certificate... [2025-09-23 18:34:37.024] Verified OK [2025-09-23 18:34:37.040] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:34:38.623] Verified OK [2025-09-23 18:34:38.623] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:34:39.358] Verified OK [2025-09-23 18:34:39.358] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:34:42.044] fs.protected_hardlinks = 1 [2025-09-23 18:34:42.060] fs.protected_symlinks = 1 [2025-09-23 18:34:42.060] kernel.modules_disabled = 1 [2025-09-23 18:34:42.252] [2025-09-23 18:34:42.252] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:34:43.505] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:34:51.268] SBL1:1210.0.1.0 [2025-09-23 18:34:51.300] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:34:52.883] SBL2:1210.0.1.0 [2025-09-23 18:34:52.915] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:34:53.026] j-A [2025-09-23 18:35:00.367] The R5 Autosar Classic is running [2025-09-23 18:35:00.392] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:35:00.392] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:35:00.999] INIT: version 2.96 booting [2025-09-23 18:35:01.111] INIT: Entering runlevel: 5 [2025-09-23 18:35:01.271] mtd28 attached [2025-09-23 18:35:01.287] mtd24 attached [2025-09-23 18:35:01.287] mtd32 attached [2025-09-23 18:35:01.319] ubi0:animations is mounted. [2025-09-23 18:35:01.404] RTNETLINK answers: File exists [2025-09-23 18:35:01.404] ubi1:textures is mounted. [2025-09-23 18:35:01.404] ubi2:dml_code is mounted. [2025-09-23 18:35:01.404] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:35:01.404] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:35:01.404] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:35:01.404] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:35:01.404] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:35:01.404] data.LB_FadeInType0=100 [2025-09-23 18:35:01.404] data.CHLH_FadeInType0=0 [2025-09-23 18:35:01.404] data.WU_FadeInDelay=0 [2025-09-23 18:35:01.404] max_time_out=0 [2025-09-23 18:35:01.404] No splash screen [2025-09-23 18:35:01.404] stop dss Done [2025-09-23 18:35:01.436] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:35:01.476] /dev/mem opened. [2025-09-23 18:35:01.476] Memory mapped at address 0xffff86136000. [2025-09-23 18:35:01.476] Read at address 0x00600018 (0xffff86136018): 0x00000000 [2025-09-23 18:35:01.476] Write at address 0x00600018 (0xffff86136018): 0x00400040, readback 0x00400040 [2025-09-23 18:35:01.476] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:35:01.635] Loaded PowerVR consumer services. [2025-09-23 18:35:01.716] Waiting data available... [2025-09-23 18:35:01.732] 512+0 records in [2025-09-23 18:35:01.732] 512+0 records out [2025-09-23 18:35:01.748] Starting syslogd/klogd: done [2025-09-23 18:35:01.764] DML Start [2025-09-23 18:35:01.923] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:35:02.148] DML res1: 0 [2025-09-23 18:35:02.612] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:35:02.627] Read Success [2025-09-23 18:35:02.627] Verifying certificate... [2025-09-23 18:35:02.867] Verified OK [2025-09-23 18:35:02.883] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:35:04.681] Verified OK [2025-09-23 18:35:04.681] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:35:05.294] Verified OK [2025-09-23 18:35:05.294] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:35:07.789] fs.protected_hardlinks = 1 [2025-09-23 18:35:07.789] fs.protected_symlinks = 1 [2025-09-23 18:35:07.805] kernel.modules_disabled = 1 [2025-09-23 18:35:07.996] [2025-09-23 18:35:07.996] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:35:09.254] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:35:16.970] SBL1:1210.0.1.0 [2025-09-23 18:35:17.018] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:35:18.585] SBL2:1210.0.1.0 [2025-09-23 18:35:18.616] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:35:18.729] j-A [2025-09-23 18:35:26.104] The R5 Autosar Classic is running [2025-09-23 18:35:26.104] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:35:26.104] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:35:26.712] INIT: version 2.96 booting [2025-09-23 18:35:26.808] INIT: Entering runlevel: 5 [2025-09-23 18:35:26.968] mtd28 attached [2025-09-23 18:35:26.984] mtd24 attached [2025-09-23 18:35:26.984] mtd32 attached [2025-09-23 18:35:27.016] ubi0:animations is mounted. [2025-09-23 18:35:27.098] RTNETLINK answers: File exists [2025-09-23 18:35:27.098] ubi1:dml_code is mounted. [2025-09-23 18:35:27.098] ubi2:textures is mounted. [2025-09-23 18:35:27.098] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:35:27.098] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:35:27.098] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:35:27.098] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:35:27.098] data.LB_FadeInType0=100 [2025-09-23 18:35:27.098] data.CHLH_FadeInType0=0 [2025-09-23 18:35:27.098] data.WU_FadeInDelay=0 [2025-09-23 18:35:27.098] max_time_out=0 [2025-09-23 18:35:27.098] No splash screen [2025-09-23 18:35:27.098] stop dss Done [2025-09-23 18:35:27.098] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:35:27.182] /dev/mem opened. [2025-09-23 18:35:27.182] Memory mapped at address 0xffffab694000. [2025-09-23 18:35:27.182] Read at address 0x00600018 (0xffffab694018): 0x00000000 [2025-09-23 18:35:27.182] Write at address 0x00600018 (0xffffab694018): 0x00400040, readback 0x00400040 [2025-09-23 18:35:27.208] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:35:27.208] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:35:27.272] Loaded PowerVR consumer services. [2025-09-23 18:35:27.400] 512+0 records in [2025-09-23 18:35:27.400] 512+0 records out [2025-09-23 18:35:27.416] Waiting data available... [2025-09-23 18:35:27.448] Starting syslogd/klogd: done [2025-09-23 18:35:27.464] DML Start [2025-09-23 18:35:27.640] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:35:27.896] DML res1: 0 [2025-09-23 18:35:28.286] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:35:28.286] Read Success [2025-09-23 18:35:28.286] Verifying certificate... [2025-09-23 18:35:28.542] Verified OK [2025-09-23 18:35:28.558] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:35:30.292] Verified OK [2025-09-23 18:35:30.292] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:35:30.890] Verified OK [2025-09-23 18:35:30.890] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:35:33.465] fs.protected_hardlinks = 1 [2025-09-23 18:35:33.465] fs.protected_symlinks = 1 [2025-09-23 18:35:33.481] kernel.modules_disabled = 1 [2025-09-23 18:35:33.672] [2025-09-23 18:35:33.672] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:35:34.962] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:35:42.702] SBL1:1210.0.1.0 [2025-09-23 18:35:42.734] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:35:44.317] SBL2:1210.0.1.0 [2025-09-23 18:35:44.349] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:35:44.461] j-A [2025-09-23 18:35:51.800] The R5 Autosar Classic is running [2025-09-23 18:35:51.825] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:35:51.825] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:35:52.434] INIT: version 2.96 booting [2025-09-23 18:35:52.545] INIT: Entering runlevel: 5 [2025-09-23 18:35:52.705] mtd24 attached [2025-09-23 18:35:52.705] mtd32 attached [2025-09-23 18:35:52.721] mtd28 attached [2025-09-23 18:35:52.769] RTNETLINK answers: File exists [2025-09-23 18:35:52.832] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:35:52.832] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:35:52.832] ubi0:textures is mounted. [2025-09-23 18:35:52.832] ubi2:animations is mounted. [2025-09-23 18:35:52.832] ubi1:dml_code is mounted. [2025-09-23 18:35:52.832] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:35:52.832] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:35:52.832] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:35:52.832] data.LB_FadeInType0=100 [2025-09-23 18:35:52.832] data.CHLH_FadeInType0=0 [2025-09-23 18:35:52.832] data.WU_FadeInDelay=0 [2025-09-23 18:35:52.832] max_time_out=0 [2025-09-23 18:35:52.832] No splash screen [2025-09-23 18:35:52.832] stop dss Done [2025-09-23 18:35:52.848] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:35:52.870] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:35:52.908] /dev/mem opened. [2025-09-23 18:35:52.908] Memory mapped at address 0xffffa0692000. [2025-09-23 18:35:52.908] Read at address 0x00600018 (0xffffa0692018): 0x00000000 [2025-09-23 18:35:52.908] Write at address 0x00600018 (0xffffa0692018): 0x00400040, readback 0x00400040 [2025-09-23 18:35:53.036] Loaded PowerVR consumer services. [2025-09-23 18:35:53.148] 512+0 records in [2025-09-23 18:35:53.148] 512+0 records out [2025-09-23 18:35:53.164] Waiting data available... [2025-09-23 18:35:53.180] Starting syslogd/klogd: done [2025-09-23 18:35:53.196] DML Start [2025-09-23 18:35:53.340] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:35:53.548] DML res1: 0 [2025-09-23 18:35:54.035] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:35:54.035] Read Success [2025-09-23 18:35:54.035] Verifying certificate... [2025-09-23 18:35:54.259] Verified OK [2025-09-23 18:35:54.275] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:35:55.954] Verified OK [2025-09-23 18:35:55.954] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:35:56.583] Verified OK [2025-09-23 18:35:56.583] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:35:59.254] fs.protected_hardlinks = 1 [2025-09-23 18:35:59.254] fs.protected_symlinks = 1 [2025-09-23 18:35:59.270] kernel.modules_disabled = 1 [2025-09-23 18:35:59.462] [2025-09-23 18:35:59.462] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:36:00.709] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:36:08.421] SBL1:1210.0.1.0 [2025-09-23 18:36:08.453] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:36:10.036] SBL2:1210.0.1.0 [2025-09-23 18:36:10.068] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:36:10.181] j-A [2025-09-23 18:36:17.553] The R5 Autosar Classic is running [2025-09-23 18:36:17.553] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:36:17.553] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:36:18.161] INIT: version 2.96 booting [2025-09-23 18:36:18.273] INIT: Entering runlevel: 5 [2025-09-23 18:36:18.416] mtd24 attached [2025-09-23 18:36:18.432] mtd28 attached [2025-09-23 18:36:18.464] ubi0:textures is mounted. [2025-09-23 18:36:18.464] mtd32 attached [2025-09-23 18:36:18.496] ubi1:animations is mounted. [2025-09-23 18:36:18.558] RTNETLINK answers: File exists [2025-09-23 18:36:18.558] ubi2:dml_code is mounted. [2025-09-23 18:36:18.558] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:36:18.558] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:36:18.558] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:36:18.558] data.LB_FadeInType0=100 [2025-09-23 18:36:18.558] data.CHLH_FadeInType0=0 [2025-09-23 18:36:18.558] data.WU_FadeInDelay=0 [2025-09-23 18:36:18.558] max_time_out=0 [2025-09-23 18:36:18.558] No splash screen [2025-09-23 18:36:18.558] stop dss Done [2025-09-23 18:36:18.558] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:36:18.558] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:36:18.626] /dev/mem opened. [2025-09-23 18:36:18.626] Memory mapped at address 0xffffa772a000. [2025-09-23 18:36:18.626] Read at address 0x00600018 (0xffffa772a018): 0x00000000 [2025-09-23 18:36:18.626] Write at address 0x00600018 (0xffffa772a018): 0x00400040, readback 0x00400040 [2025-09-23 18:36:18.626] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:36:18.642] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:36:18.786] Loaded PowerVR consumer services. [2025-09-23 18:36:18.896] Waiting data available... [2025-09-23 18:36:18.896] 512+0 records in [2025-09-23 18:36:18.896] 512+0 records out [2025-09-23 18:36:18.913] Starting syslogd/klogd: done [2025-09-23 18:36:18.929] DML Start [2025-09-23 18:36:19.136] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:36:19.344] DML res1: 0 [2025-09-23 18:36:19.798] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:36:19.798] Read Success [2025-09-23 18:36:19.798] Verifying certificate... [2025-09-23 18:36:20.070] Verified OK [2025-09-23 18:36:20.086] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:36:21.684] Verified OK [2025-09-23 18:36:21.684] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:36:22.318] Verified OK [2025-09-23 18:36:22.318] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:36:24.957] fs.protected_hardlinks = 1 [2025-09-23 18:36:24.973] fs.protected_symlinks = 1 [2025-09-23 18:36:24.989] kernel.modules_disabled = 1 [2025-09-23 18:36:25.181] [2025-09-23 18:36:25.181] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:36:26.476] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:36:34.127] SBL1:1210.0.1.0 [2025-09-23 18:36:34.175] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:36:35.742] SBL2:1210.0.1.0 [2025-09-23 18:36:35.774] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:36:35.886] j-A [2025-09-23 18:36:43.241] The R5 Autosar Classic is running [2025-09-23 18:36:43.241] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:36:43.262] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:36:43.870] INIT: version 2.96 booting [2025-09-23 18:36:43.981] INIT: Entering runlevel: 5 [2025-09-23 18:36:44.126] mtd24 attached [2025-09-23 18:36:44.157] mtd32 attached [2025-09-23 18:36:44.157] mtd28 attached [2025-09-23 18:36:44.173] ubi0:textures is mounted. [2025-09-23 18:36:44.205] RTNETLINK answers: File exists [2025-09-23 18:36:44.260] ubi2:animations is mounted. [2025-09-23 18:36:44.260] ubi1:dml_code is mounted. [2025-09-23 18:36:44.260] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:36:44.260] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:36:44.260] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:36:44.260] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:36:44.260] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:36:44.260] data.LB_FadeInType0=100 [2025-09-23 18:36:44.260] data.CHLH_FadeInType0=0 [2025-09-23 18:36:44.260] data.WU_FadeInDelay=0 [2025-09-23 18:36:44.260] max_time_out=0 [2025-09-23 18:36:44.260] No splash screen [2025-09-23 18:36:44.260] stop dss Done [2025-09-23 18:36:44.336] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:36:44.336] /dev/mem opened. [2025-09-23 18:36:44.336] Memory mapped at address 0xffff82cc3000. [2025-09-23 18:36:44.336] Read at address 0x00600018 (0xffff82cc3018): 0x00000000 [2025-09-23 18:36:44.336] Write at address 0x00600018 (0xffff82cc3018): 0x00400040, readback 0x00400040 [2025-09-23 18:36:44.336] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:36:44.433] Loaded PowerVR consumer services. [2025-09-23 18:36:44.560] 512+0 records in [2025-09-23 18:36:44.560] 512+0 records out [2025-09-23 18:36:44.592] Starting syslogd/klogd: Waiting data available... [2025-09-23 18:36:44.607] done [2025-09-23 18:36:44.607] DML Start [2025-09-23 18:36:44.831] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:36:45.055] DML res1: 0 [2025-09-23 18:36:45.452] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:36:45.452] Read Success [2025-09-23 18:36:45.452] Verifying certificate... [2025-09-23 18:36:45.724] Verified OK [2025-09-23 18:36:45.740] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:36:47.556] Verified OK [2025-09-23 18:36:47.556] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:36:48.052] Verified OK [2025-09-23 18:36:48.052] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:36:50.515] fs.protected_hardlinks = 1 [2025-09-23 18:36:50.515] fs.protected_symlinks = 1 [2025-09-23 18:36:50.531] kernel.modules_disabled = 1 [2025-09-23 18:36:50.722] [2025-09-23 18:36:50.722] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:36:52.122] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:36:59.856] SBL1:1210.0.1.0 [2025-09-23 18:36:59.888] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:37:01.471] SBL2:1210.0.1.0 [2025-09-23 18:37:01.503] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:37:01.615] j-A [2025-09-23 18:37:08.987] The R5 Autosar Classic is running [2025-09-23 18:37:08.987] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:37:08.987] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:37:09.595] INIT: version 2.96 booting [2025-09-23 18:37:09.706] INIT: Entering runlevel: 5 [2025-09-23 18:37:09.867] mtd32 attached [2025-09-23 18:37:09.867] mtd24 attached [2025-09-23 18:37:09.883] mtd28 attached [2025-09-23 18:37:09.914] ubi0:dml_code is mounted. [2025-09-23 18:37:09.930] RTNETLINK answers: File exists [2025-09-23 18:37:09.967] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:37:09.967] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:37:09.967] ubi2:animations is mounted. [2025-09-23 18:37:09.967] ubi1:textures is mounted. [2025-09-23 18:37:09.967] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:37:09.967] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:37:09.967] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:37:09.997] data.LB_FadeInType0=100 [2025-09-23 18:37:09.997] data.CHLH_FadeInType0=0 [2025-09-23 18:37:09.997] data.WU_FadeInDelay=0 [2025-09-23 18:37:09.997] max_time_out=0 [2025-09-23 18:37:09.997] No splash screen [2025-09-23 18:37:09.997] stop dss Done [2025-09-23 18:37:10.029] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:37:10.045] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:37:10.083] /dev/mem opened. [2025-09-23 18:37:10.083] Memory mapped at address 0xffff9b6a7000. [2025-09-23 18:37:10.083] Read at address 0x00600018 (0xffff9b6a7018): 0x00000000 [2025-09-23 18:37:10.083] Write at address 0x00600018 (0xffff9b6a7018): 0x00400040, readback 0x00400040 [2025-09-23 18:37:10.211] Loaded PowerVR consumer services. [2025-09-23 18:37:10.291] 512+0 records in [2025-09-23 18:37:10.291] 512+0 records out [2025-09-23 18:37:10.323] Waiting data available... [2025-09-23 18:37:10.339] Starting syslogd/klogd: done [2025-09-23 18:37:10.355] DML Start [2025-09-23 18:37:10.546] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:37:10.770] DML res1: 0 [2025-09-23 18:37:11.261] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:37:11.261] Read Success [2025-09-23 18:37:11.261] Verifying certificate... [2025-09-23 18:37:11.485] Verified OK [2025-09-23 18:37:11.501] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:37:13.058] Verified OK [2025-09-23 18:37:13.058] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:37:13.656] Verified OK [2025-09-23 18:37:13.656] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:37:16.503] fs.protected_hardlinks = 1 [2025-09-23 18:37:16.503] fs.protected_symlinks = 1 [2025-09-23 18:37:16.519] kernel.modules_disabled = 1 [2025-09-23 18:37:16.727] [2025-09-23 18:37:16.727] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:37:17.869] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:37:25.578] SBL1:1210.0.1.0 [2025-09-23 18:37:25.626] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:37:27.193] SBL2:1210.0.1.0 [2025-09-23 18:37:27.225] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:37:27.338] j-A [2025-09-23 18:37:34.712] The R5 Autosar Classic is running [2025-09-23 18:37:34.712] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:37:34.712] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:37:35.320] INIT: version 2.96 booting [2025-09-23 18:37:35.432] INIT: Entering runlevel: 5 [2025-09-23 18:37:35.592] mtd28 attached [2025-09-23 18:37:35.608] mtd32 attached [2025-09-23 18:37:35.608] mtd24 attached [2025-09-23 18:37:35.640] ubi0:animations is mounted. [2025-09-23 18:37:35.656] ubi1:dml_code is mounted. [2025-09-23 18:37:35.703] RTNETLINK answers: File exists [2025-09-23 18:37:35.703] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:37:35.703] ubi2:textures is mounted. [2025-09-23 18:37:35.703] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:37:35.703] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:37:35.703] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:37:35.703] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:37:35.703] data.LB_FadeInType0=100 [2025-09-23 18:37:35.703] data.CHLH_FadeInType0=0 [2025-09-23 18:37:35.703] data.WU_FadeInDelay=0 [2025-09-23 18:37:35.724] max_time_out=0 [2025-09-23 18:37:35.724] No splash screen [2025-09-23 18:37:35.724] stop dss Done [2025-09-23 18:37:35.756] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:37:35.791] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:37:35.791] /dev/mem opened. [2025-09-23 18:37:35.791] Memory mapped at address 0xffff9f925000. [2025-09-23 18:37:35.791] Read at address 0x00600018 (0xffff9f925018): 0x00000000 [2025-09-23 18:37:35.791] Write at address 0x00600018 (0xffff9f925018): 0x00400040, readback 0x00400040 [2025-09-23 18:37:36.000] Loaded PowerVR consumer services. [2025-09-23 18:37:36.031] Waiting data available... [2025-09-23 18:37:36.048] 512+0 records in [2025-09-23 18:37:36.048] 512+0 records out [2025-09-23 18:37:36.063] Starting syslogd/klogd: done [2025-09-23 18:37:36.095] DML Start [2025-09-23 18:37:36.288] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:37:36.511] DML res1: 0 [2025-09-23 18:37:36.939] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:37:36.939] Read Success [2025-09-23 18:37:36.939] Verifying certificate... [2025-09-23 18:37:37.178] Verified OK [2025-09-23 18:37:37.194] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:37:38.921] Verified OK [2025-09-23 18:37:38.921] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:37:39.434] Verified OK [2025-09-23 18:37:39.434] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:37:41.928] fs.protected_hardlinks = 1 [2025-09-23 18:37:41.943] fs.protected_symlinks = 1 [2025-09-23 18:37:41.943] kernel.modules_disabled = 1 [2025-09-23 18:37:42.152] [2025-09-23 18:37:42.152] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:37:43.603] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:37:51.294] SBL1:1210.0.1.0 [2025-09-23 18:37:51.342] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:37:52.908] SBL2:1210.0.1.0 [2025-09-23 18:37:52.956] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:37:53.052] j-A [2025-09-23 18:38:00.408] The R5 Autosar Classic is running [2025-09-23 18:38:00.408] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:38:00.429] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:38:01.037] INIT: version 2.96 booting [2025-09-23 18:38:01.149] INIT: Entering runlevel: 5 [2025-09-23 18:38:01.308] mtd32 attached [2025-09-23 18:38:01.308] mtd28 attached [2025-09-23 18:38:01.324] mtd24 attached [2025-09-23 18:38:01.356] ubi0:dml_code is mounted. [2025-09-23 18:38:01.372] RTNETLINK answers: File exists [2025-09-23 18:38:01.372] ubi1:animations is mounted. [2025-09-23 18:38:01.430] ubi2:textures is mounted. [2025-09-23 18:38:01.430] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:38:01.430] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:38:01.430] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:38:01.430] data.LB_FadeInType0=100 [2025-09-23 18:38:01.430] data.CHLH_FadeInType0=0 [2025-09-23 18:38:01.430] data.WU_FadeInDelay=0 [2025-09-23 18:38:01.430] max_time_out=0 [2025-09-23 18:38:01.430] No splash screen [2025-09-23 18:38:01.430] stop dss Done [2025-09-23 18:38:01.430] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:38:01.430] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:38:01.502] /dev/mem opened. [2025-09-23 18:38:01.502] Memory mapped at address 0xffffaa3d4000. [2025-09-23 18:38:01.502] Read at address 0x00600018 (0xffffaa3d4018): 0x00000000 [2025-09-23 18:38:01.502] Write at address 0x00600018 (0xffffaa3d4018): 0x00400040, readback 0x00400040 [2025-09-23 18:38:01.502] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:38:01.502] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:38:01.725] Loaded PowerVR consumer services. [2025-09-23 18:38:01.757] 512+0 records in [2025-09-23 18:38:01.757] 512+0 records out [2025-09-23 18:38:01.773] Waiting data available... [2025-09-23 18:38:01.789] Starting syslogd/klogd: done [2025-09-23 18:38:01.821] DML Start [2025-09-23 18:38:01.997] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:38:02.237] DML res1: 0 [2025-09-23 18:38:02.637] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:38:02.658] Read Success [2025-09-23 18:38:02.658] Verifying certificate... [2025-09-23 18:38:02.898] Verified OK [2025-09-23 18:38:02.913] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:38:04.653] Verified OK [2025-09-23 18:38:04.653] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:38:05.253] Verified OK [2025-09-23 18:38:05.253] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:38:07.843] fs.protected_hardlinks = 1 [2025-09-23 18:38:07.843] fs.protected_symlinks = 1 [2025-09-23 18:38:07.859] kernel.modules_disabled = 1 [2025-09-23 18:38:08.051] [2025-09-23 18:38:08.051] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:38:09.330] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:38:17.009] SBL1:1210.0.1.0 [2025-09-23 18:38:17.057] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:38:18.623] SBL2:1210.0.1.0 [2025-09-23 18:38:18.655] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:38:18.768] j-A [2025-09-23 18:38:26.141] The R5 Autosar Classic is running [2025-09-23 18:38:26.141] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:38:26.141] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:38:26.749] INIT: version 2.96 booting [2025-09-23 18:38:26.861] INIT: Entering runlevel: 5 [2025-09-23 18:38:27.005] mtd24 attached [2025-09-23 18:38:27.021] mtd32 attached [2025-09-23 18:38:27.037] mtd28 attached [2025-09-23 18:38:27.052] ubi0:textures is mounted. [2025-09-23 18:38:27.084] RTNETLINK answers: File exists [2025-09-23 18:38:27.084] ubi2:animations is mounted. [2025-09-23 18:38:27.120] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:38:27.120] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:38:27.120] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:38:27.120] ubi1:dml_code is mounted. [2025-09-23 18:38:27.120] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:38:27.120] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:38:27.148] data.LB_FadeInType0=100 [2025-09-23 18:38:27.148] data.CHLH_FadeInType0=0 [2025-09-23 18:38:27.148] data.WU_FadeInDelay=0 [2025-09-23 18:38:27.148] max_time_out=0 [2025-09-23 18:38:27.148] No splash screen [2025-09-23 18:38:27.148] stop dss Done [2025-09-23 18:38:27.180] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:38:27.196] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:38:27.234] /dev/mem opened. [2025-09-23 18:38:27.234] Memory mapped at address 0xffff98d73000. [2025-09-23 18:38:27.234] Read at address 0x00600018 (0xffff98d73018): 0x00000000 [2025-09-23 18:38:27.234] Write at address 0x00600018 (0xffff98d73018): 0x00400040, readback 0x00400040 [2025-09-23 18:38:27.299] Loaded PowerVR consumer services. [2025-09-23 18:38:27.427] 512+0 records in [2025-09-23 18:38:27.427] 512+0 records out [2025-09-23 18:38:27.459] Waiting data available... [2025-09-23 18:38:27.490] Starting syslogd/klogd: done [2025-09-23 18:38:27.506] DML Start [2025-09-23 18:38:27.698] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:38:27.938] DML res1: 0 [2025-09-23 18:38:28.393] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:38:28.393] Read Success [2025-09-23 18:38:28.393] Verifying certificate... [2025-09-23 18:38:28.633] Verified OK [2025-09-23 18:38:28.648] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:38:30.337] Verified OK [2025-09-23 18:38:30.337] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:38:30.971] Verified OK [2025-09-23 18:38:30.971] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:38:33.545] fs.protected_hardlinks = 1 [2025-09-23 18:38:33.545] fs.protected_symlinks = 1 [2025-09-23 18:38:33.561] kernel.modules_disabled = 1 [2025-09-23 18:38:33.753] [2025-09-23 18:38:33.753] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:38:35.006] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:38:42.768] SBL1:1210.0.1.0 [2025-09-23 18:38:42.800] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 18:38:44.383] SBL2:1210.0.1.0 [2025-09-23 18:38:44.415] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:38:44.526] j-A [2025-09-23 18:38:51.867] The R5 Autosar Classic is running [2025-09-23 18:38:51.892] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:38:51.892] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:38:52.500] INIT: version 2.96 booting [2025-09-23 18:38:52.612] INIT: Entering runlevel: 5 [2025-09-23 18:38:52.772] mtd28 attached [2025-09-23 18:38:52.772] mtd32 attached [2025-09-23 18:38:52.788] mtd24 attached [2025-09-23 18:38:52.836] RTNETLINK answers: File exists [2025-09-23 18:38:52.836] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:38:52.901] ubi1:dml_code is mounted. [2025-09-23 18:38:52.901] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:38:52.901] ubi0:animations is mounted. [2025-09-23 18:38:52.901] ubi2:textures is mounted. [2025-09-23 18:38:52.901] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:38:52.901] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:38:52.901] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:38:52.901] data.LB_FadeInType0=100 [2025-09-23 18:38:52.901] data.CHLH_FadeInType0=0 [2025-09-23 18:38:52.901] data.WU_FadeInDelay=0 [2025-09-23 18:38:52.901] max_time_out=0 [2025-09-23 18:38:52.901] No splash screen [2025-09-23 18:38:52.901] stop dss Done [2025-09-23 18:38:52.986] /dev/mem opened. [2025-09-23 18:38:52.986] Memory mapped at address 0xffff947d5000. [2025-09-23 18:38:52.986] Read at address 0x00600018 (0xffff947d5018): 0x00000000 [2025-09-23 18:38:52.986] Write at address 0x00600018 (0xffff947d5018): 0x00400040, readback 0x00400040 [2025-09-23 18:38:52.986] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:38:52.986] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:38:53.114] Loaded PowerVR consumer services. [2025-09-23 18:38:53.194] 512+0 records in [2025-09-23 18:38:53.194] 512+0 records out [2025-09-23 18:38:53.226] Waiting data available... [2025-09-23 18:38:53.226] Starting syslogd/klogd: done [2025-09-23 18:38:53.258] DML Start [2025-09-23 18:38:53.403] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:38:53.674] DML res1: 0 [2025-09-23 18:38:54.074] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:38:54.095] Read Success [2025-09-23 18:38:54.095] Verifying certificate... [2025-09-23 18:38:54.303] Verified OK [2025-09-23 18:38:54.318] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:38:56.008] Verified OK [2025-09-23 18:38:56.008] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:38:56.641] Verified OK [2025-09-23 18:38:56.641] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:38:59.199] fs.protected_hardlinks = 1 [2025-09-23 18:38:59.215] fs.protected_symlinks = 1 [2025-09-23 18:38:59.215] kernel.modules_disabled = 1 [2025-09-23 18:38:59.423] [2025-09-23 18:38:59.423] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:39:00.763] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:39:08.484] SBL1:1210.0.1.0 [2025-09-23 18:39:08.516] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:39:10.099] SBL2:1210.0.1.0 [2025-09-23 18:39:10.131] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:39:10.243] j-A [2025-09-23 18:39:17.615] The R5 Autosar Classic is running [2025-09-23 18:39:17.615] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:39:17.615] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:39:18.223] INIT: version 2.96 booting [2025-09-23 18:39:18.334] INIT: Entering runlevel: 5 [2025-09-23 18:39:18.495] mtd32 attached [2025-09-23 18:39:18.495] mtd24 attached [2025-09-23 18:39:18.511] mtd28 attached [2025-09-23 18:39:18.559] ubi0:dml_code is mounted. [2025-09-23 18:39:18.559] RTNETLINK answers: File exists [2025-09-23 18:39:18.575] ubi1:textures is mounted. [2025-09-23 18:39:18.631] ubi2:animations is mounted. [2025-09-23 18:39:18.631] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:39:18.631] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:39:18.631] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:39:18.631] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:39:18.631] data.LB_FadeInType0=100 [2025-09-23 18:39:18.631] data.CHLH_FadeInType0=0 [2025-09-23 18:39:18.631] data.WU_FadeInDelay=0 [2025-09-23 18:39:18.631] max_time_out=0 [2025-09-23 18:39:18.631] No splash screen [2025-09-23 18:39:18.631] stop dss Done [2025-09-23 18:39:18.631] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:39:18.719] /dev/mem opened. [2025-09-23 18:39:18.719] Memory mapped at address 0xffffb3cd2000. [2025-09-23 18:39:18.719] Read at address 0x00600018 (0xffffb3cd2018): 0x00000000 [2025-09-23 18:39:18.719] Write at address 0x00600018 (0xffffb3cd2018): 0x00400040, readback 0x00400040 [2025-09-23 18:39:18.719] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:39:18.719] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:39:18.896] Loaded PowerVR consumer services. [2025-09-23 18:39:18.952] Waiting data available... [2025-09-23 18:39:18.952] 512+0 records in [2025-09-23 18:39:18.952] 512+0 records out [2025-09-23 18:39:18.984] Starting syslogd/klogd: done [2025-09-23 18:39:19.000] DML Start [2025-09-23 18:39:19.192] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:39:19.416] DML res1: 0 [2025-09-23 18:39:19.831] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:39:19.852] Read Success [2025-09-23 18:39:19.852] Verifying certificate... [2025-09-23 18:39:20.092] Verified OK [2025-09-23 18:39:20.109] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:39:21.724] Verified OK [2025-09-23 18:39:21.724] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:39:22.359] Verified OK [2025-09-23 18:39:22.359] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:39:25.125] fs.protected_hardlinks = 1 [2025-09-23 18:39:25.125] fs.protected_symlinks = 1 [2025-09-23 18:39:25.141] kernel.modules_disabled = 1 [2025-09-23 18:39:25.332] [2025-09-23 18:39:25.332] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:39:26.513] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:39:34.192] SBL1:1210.0.1.0 [2025-09-23 18:39:34.240] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:39:35.807] SBL2:1210.0.1.0 [2025-09-23 18:39:35.855] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:39:35.950] j-A [2025-09-23 18:39:43.307] The R5 Autosar Classic is running [2025-09-23 18:39:43.307] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:39:43.328] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:39:43.936] INIT: version 2.96 booting [2025-09-23 18:39:44.047] INIT: Entering runlevel: 5 [2025-09-23 18:39:44.192] mtd32 attached [2025-09-23 18:39:44.208] mtd28 attached [2025-09-23 18:39:44.224] mtd24 attached [2025-09-23 18:39:44.255] ubi0:dml_code is mounted. [2025-09-23 18:39:44.308] RTNETLINK answers: File exists [2025-09-23 18:39:44.308] ubi1:animations is mounted. [2025-09-23 18:39:44.308] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:39:44.308] ubi2:textures is mounted. [2025-09-23 18:39:44.308] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:39:44.308] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:39:44.308] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:39:44.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:39:44.329] data.LB_FadeInType0=100 [2025-09-23 18:39:44.329] data.CHLH_FadeInType0=0 [2025-09-23 18:39:44.329] data.WU_FadeInDelay=0 [2025-09-23 18:39:44.329] max_time_out=0 [2025-09-23 18:39:44.329] No splash screen [2025-09-23 18:39:44.329] stop dss Done [2025-09-23 18:39:44.345] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:39:44.361] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:39:44.393] /dev/mem opened. [2025-09-23 18:39:44.393] Memory mapped at address 0xffffbaf70000. [2025-09-23 18:39:44.419] Read at address 0x00600018 (0xffffbaf70018): 0x00000000 [2025-09-23 18:39:44.419] Write at address 0x00600018 (0xffffbaf70018): 0x00400040, readback 0x00400040 [2025-09-23 18:39:44.500] Loaded PowerVR consumer services. [2025-09-23 18:39:44.627] 512+0 records in [2025-09-23 18:39:44.627] 512+0 records out [2025-09-23 18:39:44.643] Waiting data available... [2025-09-23 18:39:44.675] Starting syslogd/klogd: done [2025-09-23 18:39:44.691] DML Start [2025-09-23 18:39:44.883] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:39:45.140] DML res1: 0 [2025-09-23 18:39:45.459] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:39:45.480] Read Success [2025-09-23 18:39:45.480] Verifying certificate... [2025-09-23 18:39:45.751] Verified OK [2025-09-23 18:39:45.767] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:39:47.477] Verified OK [2025-09-23 18:39:47.477] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:39:48.123] Verified OK [2025-09-23 18:39:48.123] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:39:50.777] fs.protected_hardlinks = 1 [2025-09-23 18:39:50.793] fs.protected_symlinks = 1 [2025-09-23 18:39:50.793] kernel.modules_disabled = 1 [2025-09-23 18:39:51.001] [2025-09-23 18:39:51.001] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:39:52.209] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:39:59.933] SBL1:1210.0.1.0 [2025-09-23 18:39:59.981] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:40:01.548] SBL2:1210.0.1.0 [2025-09-23 18:40:01.580] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:40:01.692] j-A [2025-09-23 18:40:09.067] The R5 Autosar Classic is running [2025-09-23 18:40:09.067] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:40:09.067] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:40:09.675] INIT: version 2.96 booting [2025-09-23 18:40:09.787] INIT: Entering runlevel: 5 [2025-09-23 18:40:09.947] mtd32 attached [2025-09-23 18:40:09.947] mtd24 attached [2025-09-23 18:40:09.963] mtd28 attached [2025-09-23 18:40:10.011] RTNETLINK answers: File exists [2025-09-23 18:40:10.011] ubi0:dml_code is mounted. [2025-09-23 18:40:10.050] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:40:10.050] ubi1:textures is mounted. [2025-09-23 18:40:10.050] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:40:10.050] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:40:10.050] ubi2:animations is mounted. [2025-09-23 18:40:10.050] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:40:10.050] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:40:10.074] data.LB_FadeInType0=100 [2025-09-23 18:40:10.074] data.CHLH_FadeInType0=0 [2025-09-23 18:40:10.074] data.WU_FadeInDelay=0 [2025-09-23 18:40:10.074] max_time_out=0 [2025-09-23 18:40:10.074] No splash screen [2025-09-23 18:40:10.074] stop dss Done [2025-09-23 18:40:10.106] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:40:10.122] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:40:10.161] /dev/mem opened. [2025-09-23 18:40:10.161] Memory mapped at address 0xffffafba9000. [2025-09-23 18:40:10.161] Read at address 0x00600018 (0xffffafba9018): 0x00000000 [2025-09-23 18:40:10.161] Write at address 0x00600018 (0xffffafba9018): 0x00400040, readback 0x00400040 [2025-09-23 18:40:10.338] Loaded PowerVR consumer services. [2025-09-23 18:40:10.369] 512+0 records in [2025-09-23 18:40:10.396] 512+0 records out [2025-09-23 18:40:10.396] Waiting data available... [2025-09-23 18:40:10.396] Starting syslogd/klogd: done [2025-09-23 18:40:10.428] DML Start [2025-09-23 18:40:10.589] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:40:10.813] DML res1: 0 [2025-09-23 18:40:11.276] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:40:11.297] Read Success [2025-09-23 18:40:11.297] Verifying certificate... [2025-09-23 18:40:11.569] Verified OK [2025-09-23 18:40:11.601] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:40:13.403] Verified OK [2025-09-23 18:40:13.403] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:40:13.915] Verified OK [2025-09-23 18:40:13.915] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:40:16.409] fs.protected_hardlinks = 1 [2025-09-23 18:40:16.426] fs.protected_symlinks = 1 [2025-09-23 18:40:16.426] kernel.modules_disabled = 1 [2025-09-23 18:40:16.602] [2025-09-23 18:40:16.602] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:40:17.890] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:40:25.670] SBL1:1210.0.1.0 [2025-09-23 18:40:25.718] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:40:27.285] SBL2:1210.0.1.0 [2025-09-23 18:40:27.333] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:40:27.429] j-A [2025-09-23 18:40:34.784] The R5 Autosar Classic is running [2025-09-23 18:40:34.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:40:34.807] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:40:35.414] INIT: version 2.96 booting [2025-09-23 18:40:35.525] INIT: Entering runlevel: 5 [2025-09-23 18:40:35.670] mtd24 attached [2025-09-23 18:40:35.686] mtd32 attached [2025-09-23 18:40:35.701] mtd28 attached [2025-09-23 18:40:35.802] RTNETLINK answers: File exists [2025-09-23 18:40:35.802] ubi0:textures is mounted. [2025-09-23 18:40:35.802] ubi1:dml_code is mounted. [2025-09-23 18:40:35.802] ubi2:animations is mounted. [2025-09-23 18:40:35.802] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:40:35.802] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:40:35.802] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:40:35.802] data.LB_FadeInType0=100 [2025-09-23 18:40:35.802] data.CHLH_FadeInType0=0 [2025-09-23 18:40:35.802] data.WU_FadeInDelay=0 [2025-09-23 18:40:35.802] max_time_out=0 [2025-09-23 18:40:35.802] No splash screen [2025-09-23 18:40:35.802] stop dss Done [2025-09-23 18:40:35.802] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:40:35.802] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:40:35.869] /dev/mem opened. [2025-09-23 18:40:35.869] Memory mapped at address 0xffffb56ba000. [2025-09-23 18:40:35.869] Read at address 0x00600018 (0xffffb56ba018): 0x00000000 [2025-09-23 18:40:35.869] Write at address 0x00600018 (0xffffb56ba018): 0x00400040, readback 0x00400040 [2025-09-23 18:40:35.885] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:40:35.917] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:40:36.076] Loaded PowerVR consumer services. [2025-09-23 18:40:36.108] Waiting data available... [2025-09-23 18:40:36.124] 512+0 records in [2025-09-23 18:40:36.124] 512+0 records out [2025-09-23 18:40:36.140] Starting syslogd/klogd: done [2025-09-23 18:40:36.156] DML Start [2025-09-23 18:40:36.316] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:40:36.572] DML res1: 0 [2025-09-23 18:40:36.988] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:40:37.004] Read Success [2025-09-23 18:40:37.004] Verifying certificate... [2025-09-23 18:40:37.244] Verified OK [2025-09-23 18:40:37.260] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:40:38.875] Verified OK [2025-09-23 18:40:38.875] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:40:39.512] Verified OK [2025-09-23 18:40:39.512] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:40:42.054] fs.protected_hardlinks = 1 [2025-09-23 18:40:42.070] fs.protected_symlinks = 1 [2025-09-23 18:40:42.070] kernel.modules_disabled = 1 [2025-09-23 18:40:42.278] [2025-09-23 18:40:42.278] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:40:43.679] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:40:51.409] SBL1:1210.0.1.0 [2025-09-23 18:40:51.441] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:40:53.024] SBL2:1210.0.1.0 [2025-09-23 18:40:53.056] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:40:53.168] j-A [2025-09-23 18:41:00.541] The R5 Autosar Classic is running [2025-09-23 18:41:00.541] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:41:00.541] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:41:01.149] INIT: version 2.96 booting [2025-09-23 18:41:01.260] INIT: Entering runlevel: 5 [2025-09-23 18:41:01.420] mtd32 attached [2025-09-23 18:41:01.420] mtd24 attached [2025-09-23 18:41:01.436] mtd28 attached [2025-09-23 18:41:01.484] ubi0:dml_code is mounted. [2025-09-23 18:41:01.484] RTNETLINK answers: File exists [2025-09-23 18:41:01.546] ubi2:animations is mounted. [2025-09-23 18:41:01.546] ubi1:textures is mounted. [2025-09-23 18:41:01.546] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:41:01.546] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:41:01.546] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:41:01.546] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:41:01.546] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:41:01.546] data.LB_FadeInType0=100 [2025-09-23 18:41:01.546] data.CHLH_FadeInType0=0 [2025-09-23 18:41:01.546] data.WU_FadeInDelay=0 [2025-09-23 18:41:01.546] max_time_out=0 [2025-09-23 18:41:01.546] No splash screen [2025-09-23 18:41:01.546] stop dss Done [2025-09-23 18:41:01.620] /dev/mem opened. [2025-09-23 18:41:01.620] Memory mapped at address 0xffffb0004000. [2025-09-23 18:41:01.620] Read at address 0x00600018 (0xffffb0004018): 0x00000000 [2025-09-23 18:41:01.620] Write at address 0x00600018 (0xffffb0004018): 0x00400040, readback 0x00400040 [2025-09-23 18:41:01.620] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:41:01.635] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:41:01.747] Loaded PowerVR consumer services. [2025-09-23 18:41:01.873] 512+0 records in [2025-09-23 18:41:01.873] 512+0 records out [2025-09-23 18:41:01.873] Waiting data available... [2025-09-23 18:41:01.904] Starting syslogd/klogd: done [2025-09-23 18:41:01.920] DML Start [2025-09-23 18:41:02.096] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:41:02.272] DML res1: 0 [2025-09-23 18:41:02.795] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:41:02.795] Read Success [2025-09-23 18:41:02.795] Verifying certificate... [2025-09-23 18:41:03.050] Verified OK [2025-09-23 18:41:03.067] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:41:04.819] Verified OK [2025-09-23 18:41:04.819] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:41:05.436] Verified OK [2025-09-23 18:41:05.436] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:41:07.978] fs.protected_hardlinks = 1 [2025-09-23 18:41:07.994] fs.protected_symlinks = 1 [2025-09-23 18:41:08.010] kernel.modules_disabled = 1 [2025-09-23 18:41:08.202] [2025-09-23 18:41:08.202] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:41:09.385] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:41:17.134] SBL1:1210.0.1.0 [2025-09-23 18:41:17.166] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:41:18.749] SBL2:1210.0.1.0 [2025-09-23 18:41:18.781] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:41:18.893] j-A [2025-09-23 18:41:26.231] The R5 Autosar Classic is running [2025-09-23 18:41:26.262] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:41:26.262] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:41:26.869] INIT: version 2.96 booting [2025-09-23 18:41:26.981] INIT: Entering runlevel: 5 [2025-09-23 18:41:27.141] mtd24 attached [2025-09-23 18:41:27.141] mtd28 attached [2025-09-23 18:41:27.157] mtd32 attached [2025-09-23 18:41:27.205] ubi0:textures is mounted. [2025-09-23 18:41:27.205] ubi1:animations is mounted. [2025-09-23 18:41:27.270] RTNETLINK answers: File exists [2025-09-23 18:41:27.270] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:41:27.270] ubi2:dml_code is mounted. [2025-09-23 18:41:27.270] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:41:27.270] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:41:27.270] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:41:27.270] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:41:27.270] data.LB_FadeInType0=100 [2025-09-23 18:41:27.270] data.CHLH_FadeInType0=0 [2025-09-23 18:41:27.270] data.WU_FadeInDelay=0 [2025-09-23 18:41:27.270] max_time_out=0 [2025-09-23 18:41:27.270] No splash screen [2025-09-23 18:41:27.270] stop dss Done [2025-09-23 18:41:27.302] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:41:27.302] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:41:27.318] /dev/mem opened. [2025-09-23 18:41:27.318] Memory mapped at address 0xffff9d212000. [2025-09-23 18:41:27.344] Read at address 0x00600018 (0xffff9d212018): 0x00000000 [2025-09-23 18:41:27.344] Write at address 0x00600018 (0xffff9d212018): 0x00400040, readback 0x00400040 [2025-09-23 18:41:27.536] Loaded PowerVR consumer services. [2025-09-23 18:41:27.584] Waiting data available... [2025-09-23 18:41:27.584] 512+0 records in [2025-09-23 18:41:27.584] 512+0 records out [2025-09-23 18:41:27.648] Starting syslogd/klogd: done [2025-09-23 18:41:27.663] DML Start [2025-09-23 18:41:27.824] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:41:28.048] DML res1: 0 [2025-09-23 18:41:28.490] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:41:28.490] Read Success [2025-09-23 18:41:28.490] Verifying certificate... [2025-09-23 18:41:28.730] Verified OK [2025-09-23 18:41:28.746] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:41:30.384] Verified OK [2025-09-23 18:41:30.384] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:41:30.953] Verified OK [2025-09-23 18:41:30.953] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:41:33.656] fs.protected_hardlinks = 1 [2025-09-23 18:41:33.656] fs.protected_symlinks = 1 [2025-09-23 18:41:33.671] kernel.modules_disabled = 1 [2025-09-23 18:41:33.848] [2025-09-23 18:41:33.848] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:41:35.154] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:41:42.847] SBL1:1210.0.1.0 [2025-09-23 18:41:42.895] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:41:44.463] SBL2:1210.0.1.0 [2025-09-23 18:41:44.511] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:41:44.606] j-A [2025-09-23 18:41:51.961] The R5 Autosar Classic is running [2025-09-23 18:41:51.961] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:41:51.982] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:41:52.589] INIT: version 2.96 booting [2025-09-23 18:41:52.701] INIT: Entering runlevel: 5 [2025-09-23 18:41:52.861] mtd28 attached [2025-09-23 18:41:52.877] mtd32 attached [2025-09-23 18:41:52.877] mtd24 attached [2025-09-23 18:41:52.893] ubi0:animations is mounted. [2025-09-23 18:41:52.925] RTNETLINK answers: File exists [2025-09-23 18:41:52.993] ubi1:dml_code is mounted. [2025-09-23 18:41:52.993] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:41:52.993] ubi2:textures is mounted. [2025-09-23 18:41:52.993] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:41:52.993] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:41:52.993] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:41:52.993] data.LB_FadeInType0=100 [2025-09-23 18:41:52.993] data.CHLH_FadeInType0=0 [2025-09-23 18:41:52.993] data.WU_FadeInDelay=0 [2025-09-23 18:41:52.993] max_time_out=0 [2025-09-23 18:41:52.993] No splash screen [2025-09-23 18:41:52.993] stop dss Done [2025-09-23 18:41:52.993] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:41:53.058] /dev/mem opened. [2025-09-23 18:41:53.058] Memory mapped at address 0xffff9d03e000. [2025-09-23 18:41:53.058] Read at address 0x00600018 (0xffff9d03e018): 0x00000000 [2025-09-23 18:41:53.058] Write at address 0x00600018 (0xffff9d03e018): 0x00400040, readback 0x00400040 [2025-09-23 18:41:53.058] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:41:53.074] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:41:53.170] Loaded PowerVR consumer services. [2025-09-23 18:41:53.324] Waiting data available... [2025-09-23 18:41:53.324] 512+0 records in [2025-09-23 18:41:53.324] 512+0 records out [2025-09-23 18:41:53.356] Starting syslogd/klogd: done [2025-09-23 18:41:53.372] DML Start [2025-09-23 18:41:53.580] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:41:53.836] DML res1: 0 [2025-09-23 18:41:54.203] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:41:54.226] Read Success [2025-09-23 18:41:54.226] Verifying certificate... [2025-09-23 18:41:54.466] Verified OK [2025-09-23 18:41:54.482] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:41:56.120] Verified OK [2025-09-23 18:41:56.120] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:41:56.770] Verified OK [2025-09-23 18:41:56.770] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:41:59.456] fs.protected_hardlinks = 1 [2025-09-23 18:41:59.472] fs.protected_symlinks = 1 [2025-09-23 18:41:59.472] kernel.modules_disabled = 1 [2025-09-23 18:41:59.679] [2025-09-23 18:41:59.679] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:42:00.895] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:42:08.571] SBL1:1210.0.1.0 [2025-09-23 18:42:08.619] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:42:10.202] SBL2:1210.0.1.0 [2025-09-23 18:42:10.234] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:42:10.330] j-A [2025-09-23 18:42:17.685] The R5 Autosar Classic is running [2025-09-23 18:42:17.710] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:42:17.710] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:42:18.317] INIT: version 2.96 booting [2025-09-23 18:42:18.429] INIT: Entering runlevel: 5 [2025-09-23 18:42:18.590] mtd28 attached [2025-09-23 18:42:18.590] mtd24 attached [2025-09-23 18:42:18.605] mtd32 attached [2025-09-23 18:42:18.653] ubi1:textures is mounted. [2025-09-23 18:42:18.653] RTNETLINK answers: File exists [2025-09-23 18:42:18.715] ubi0:animations is mounted. [2025-09-23 18:42:18.715] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:42:18.715] ubi2:dml_code is mounted. [2025-09-23 18:42:18.715] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:42:18.715] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:42:18.715] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:42:18.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:42:18.715] data.LB_FadeInType0=100 [2025-09-23 18:42:18.715] data.CHLH_FadeInType0=0 [2025-09-23 18:42:18.715] data.WU_FadeInDelay=0 [2025-09-23 18:42:18.715] max_time_out=0 [2025-09-23 18:42:18.715] No splash screen [2025-09-23 18:42:18.715] stop dss Done [2025-09-23 18:42:18.763] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:42:18.798] /dev/mem opened. [2025-09-23 18:42:18.798] Memory mapped at address 0xffffbcb43000. [2025-09-23 18:42:18.798] Read at address 0x00600018 (0xffffbcb43018): 0x00000000 [2025-09-23 18:42:18.798] Write at address 0x00600018 (0xffffbcb43018): 0x00400040, readback 0x00400040 [2025-09-23 18:42:18.798] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:42:18.989] Loaded PowerVR consumer services. [2025-09-23 18:42:19.021] Waiting data available... [2025-09-23 18:42:19.037] 512+0 records in [2025-09-23 18:42:19.037] 512+0 records out [2025-09-23 18:42:19.069] Starting syslogd/klogd: done [2025-09-23 18:42:19.085] DML Start [2025-09-23 18:42:19.245] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:42:19.516] DML res1: 0 [2025-09-23 18:42:19.926] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:42:19.926] Read Success [2025-09-23 18:42:19.926] Verifying certificate... [2025-09-23 18:42:20.150] Verified OK [2025-09-23 18:42:20.166] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:42:21.764] Verified OK [2025-09-23 18:42:21.764] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:42:22.403] Verified OK [2025-09-23 18:42:22.403] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:42:25.138] fs.protected_hardlinks = 1 [2025-09-23 18:42:25.138] fs.protected_symlinks = 1 [2025-09-23 18:42:25.153] kernel.modules_disabled = 1 [2025-09-23 18:42:25.361] [2025-09-23 18:42:25.361] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:42:26.592] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:42:34.308] SBL1:1210.0.1.0 [2025-09-23 18:42:34.355] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:42:35.922] SBL2:1210.0.1.0 [2025-09-23 18:42:35.970] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:42:36.066] j-A [2025-09-23 18:42:43.421] The R5 Autosar Classic is running [2025-09-23 18:42:43.442] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:42:43.442] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:42:44.050] INIT: version 2.96 booting [2025-09-23 18:42:44.162] INIT: Entering runlevel: 5 [2025-09-23 18:42:44.322] mtd32 attached [2025-09-23 18:42:44.322] mtd28 attached [2025-09-23 18:42:44.339] mtd24 attached [2025-09-23 18:42:44.446] ubi0:dml_code is mounted. [2025-09-23 18:42:44.446] RTNETLINK answers: File exists [2025-09-23 18:42:44.446] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:42:44.446] ubi1:animations is mounted. [2025-09-23 18:42:44.446] ubi2:textures is mounted. [2025-09-23 18:42:44.446] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:42:44.446] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:42:44.446] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:42:44.446] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:42:44.446] data.LB_FadeInType0=100 [2025-09-23 18:42:44.446] data.CHLH_FadeInType0=0 [2025-09-23 18:42:44.446] data.WU_FadeInDelay=0 [2025-09-23 18:42:44.446] max_time_out=0 [2025-09-23 18:42:44.446] No splash screen [2025-09-23 18:42:44.446] stop dss Done [2025-09-23 18:42:44.520] /dev/mem opened. [2025-09-23 18:42:44.520] Memory mapped at address 0xffff938e5000. [2025-09-23 18:42:44.520] Read at address 0x00600018 (0xffff938e5018): 0x00000000 [2025-09-23 18:42:44.520] Write at address 0x00600018 (0xffff938e5018): 0x00400040, readback 0x00400040 [2025-09-23 18:42:44.520] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:42:44.536] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:42:44.696] Loaded PowerVR consumer services. [2025-09-23 18:42:44.744] 512+0 records in [2025-09-23 18:42:44.760] 512+0 records out [2025-09-23 18:42:44.776] Waiting data available... [2025-09-23 18:42:44.808] Starting syslogd/klogd: done [2025-09-23 18:42:44.823] DML Start [2025-09-23 18:42:45.016] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:42:45.239] DML res1: 0 [2025-09-23 18:42:45.591] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:42:45.607] Read Success [2025-09-23 18:42:45.607] Verifying certificate... [2025-09-23 18:42:45.847] Verified OK [2025-09-23 18:42:45.863] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:42:47.588] Verified OK [2025-09-23 18:42:47.588] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:42:48.176] Verified OK [2025-09-23 18:42:48.176] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:42:50.844] fs.protected_hardlinks = 1 [2025-09-23 18:42:50.844] fs.protected_symlinks = 1 [2025-09-23 18:42:50.844] kernel.modules_disabled = 1 [2025-09-23 18:42:51.020] [2025-09-23 18:42:51.020] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:42:52.347] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:43:00.039] SBL1:1210.0.1.0 [2025-09-23 18:43:00.071] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:43:01.655] SBL2:1210.0.1.0 [2025-09-23 18:43:01.687] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:43:01.799] j-A [2025-09-23 18:43:09.169] The R5 Autosar Classic is running [2025-09-23 18:43:09.169] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:43:09.169] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:43:09.777] INIT: version 2.96 booting [2025-09-23 18:43:09.888] INIT: Entering runlevel: 5 [2025-09-23 18:43:10.049] mtd24 attached [2025-09-23 18:43:10.049] mtd28 attached [2025-09-23 18:43:10.065] mtd32 attached [2025-09-23 18:43:10.112] RTNETLINK answers: File exists [2025-09-23 18:43:10.175] ubi0:textures is mounted. [2025-09-23 18:43:10.175] ubi1:animations is mounted. [2025-09-23 18:43:10.175] ubi2:dml_code is mounted. [2025-09-23 18:43:10.175] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:43:10.175] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:43:10.175] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:43:10.175] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:43:10.175] data.LB_FadeInType0=100 [2025-09-23 18:43:10.175] data.CHLH_FadeInType0=0 [2025-09-23 18:43:10.175] data.WU_FadeInDelay=0 [2025-09-23 18:43:10.175] max_time_out=0 [2025-09-23 18:43:10.175] No splash screen [2025-09-23 18:43:10.175] stop dss Done [2025-09-23 18:43:10.175] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:43:10.255] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:43:10.255] /dev/mem opened. [2025-09-23 18:43:10.255] Memory mapped at address 0xffff87406000. [2025-09-23 18:43:10.255] Read at address 0x00600018 (0xffff87406018): 0x00000000 [2025-09-23 18:43:10.255] Write at address 0x00600018 (0xffff87406018): 0x00400040, readback 0x00400040 [2025-09-23 18:43:10.255] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:43:10.447] Loaded PowerVR consumer services. [2025-09-23 18:43:10.479] Waiting data available... [2025-09-23 18:43:10.495] 512+0 records in [2025-09-23 18:43:10.495] 512+0 records out [2025-09-23 18:43:10.527] Starting syslogd/klogd: done [2025-09-23 18:43:10.543] DML Start [2025-09-23 18:43:10.703] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:43:10.927] DML res1: 0 [2025-09-23 18:43:11.435] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:43:11.435] Read Success [2025-09-23 18:43:11.435] Verifying certificate... [2025-09-23 18:43:11.659] Verified OK [2025-09-23 18:43:11.675] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:43:13.402] Verified OK [2025-09-23 18:43:13.402] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:43:14.004] Verified OK [2025-09-23 18:43:14.004] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:43:16.562] fs.protected_hardlinks = 1 [2025-09-23 18:43:16.578] fs.protected_symlinks = 1 [2025-09-23 18:43:16.578] kernel.modules_disabled = 1 [2025-09-23 18:43:16.770] [2025-09-23 18:43:16.770] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:43:18.031] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:43:25.761] SBL1:1210.0.1.0 [2025-09-23 18:43:25.793] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:43:27.375] SBL2:1210.0.1.0 [2025-09-23 18:43:27.407] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:43:27.520] j-A [2025-09-23 18:43:34.859] The R5 Autosar Classic is running [2025-09-23 18:43:34.884] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:43:34.884] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:43:35.492] INIT: version 2.96 booting [2025-09-23 18:43:35.604] INIT: Entering runlevel: 5 [2025-09-23 18:43:35.748] mtd24 attached [2025-09-23 18:43:35.764] mtd32 attached [2025-09-23 18:43:35.780] mtd28 attached [2025-09-23 18:43:35.812] ubi0:textures is mounted. [2025-09-23 18:43:35.828] RTNETLINK answers: File exists [2025-09-23 18:43:35.828] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:43:35.861] ubi1:dml_code is mounted. [2025-09-23 18:43:35.861] ubi2:animations is mounted. [2025-09-23 18:43:35.861] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:43:35.861] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:43:35.861] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:43:35.861] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:43:35.885] data.LB_FadeInType0=100 [2025-09-23 18:43:35.885] data.CHLH_FadeInType0=0 [2025-09-23 18:43:35.885] data.WU_FadeInDelay=0 [2025-09-23 18:43:35.885] max_time_out=0 [2025-09-23 18:43:35.885] No splash screen [2025-09-23 18:43:35.885] stop dss Done [2025-09-23 18:43:35.901] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:43:35.917] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:43:35.950] /dev/mem opened. [2025-09-23 18:43:35.950] Memory mapped at address 0xffffb11c6000. [2025-09-23 18:43:35.950] Read at address 0x00600018 (0xffffb11c6018): 0x00000000 [2025-09-23 18:43:35.950] Write at address 0x00600018 (0xffffb11c6018): 0x00400040, readback 0x00400040 [2025-09-23 18:43:36.142] Loaded PowerVR consumer services. [2025-09-23 18:43:36.206] 512+0 records in [2025-09-23 18:43:36.206] 512+0 records out [2025-09-23 18:43:36.222] Waiting data available... [2025-09-23 18:43:36.238] Starting syslogd/klogd: done [2025-09-23 18:43:36.254] DML Start [2025-09-23 18:43:36.414] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:43:36.621] DML res1: 0 [2025-09-23 18:43:37.117] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:43:37.138] Read Success [2025-09-23 18:43:37.138] Verifying certificate... [2025-09-23 18:43:37.362] Verified OK [2025-09-23 18:43:37.362] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:43:38.957] Verified OK [2025-09-23 18:43:38.957] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:43:39.611] Verified OK [2025-09-23 18:43:39.611] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:43:42.249] fs.protected_hardlinks = 1 [2025-09-23 18:43:42.249] fs.protected_symlinks = 1 [2025-09-23 18:43:42.249] kernel.modules_disabled = 1 [2025-09-23 18:43:42.457] [2025-09-23 18:43:42.457] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:43:43.751] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:43:51.486] SBL1:1210.0.1.0 [2025-09-23 18:43:51.517] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:43:53.100] SBL2:1210.0.1.0 [2025-09-23 18:43:53.132] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:43:53.244] j-A [2025-09-23 18:44:00.616] The R5 Autosar Classic is running [2025-09-23 18:44:00.616] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:44:00.616] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:44:01.224] INIT: version 2.96 booting [2025-09-23 18:44:01.335] INIT: Entering runlevel: 5 [2025-09-23 18:44:01.495] mtd24 attached [2025-09-23 18:44:01.511] mtd28 attached [2025-09-23 18:44:01.511] mtd32 attached [2025-09-23 18:44:01.559] ubi0:textures is mounted. [2025-09-23 18:44:01.575] RTNETLINK answers: File exists [2025-09-23 18:44:01.575] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:44:01.610] ubi2:dml_code is mounted. [2025-09-23 18:44:01.610] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:44:01.610] ubi1:animations is mounted. [2025-09-23 18:44:01.610] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:44:01.610] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:44:01.610] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:44:01.633] data.LB_FadeInType0=100 [2025-09-23 18:44:01.633] data.CHLH_FadeInType0=0 [2025-09-23 18:44:01.633] data.WU_FadeInDelay=0 [2025-09-23 18:44:01.633] max_time_out=0 [2025-09-23 18:44:01.633] No splash screen [2025-09-23 18:44:01.633] stop dss Done [2025-09-23 18:44:01.665] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:44:01.681] /dev/mem opened. [2025-09-23 18:44:01.681] Memory mapped at address 0xffff945dc000. [2025-09-23 18:44:01.714] Read at address 0x00600018 (0xffff945dc018): 0x00000000 [2025-09-23 18:44:01.714] Write at address 0x00600018 (0xffff945dc018): 0x00400040, readback 0x00400040 [2025-09-23 18:44:01.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:44:01.809] Loaded PowerVR consumer services. [2025-09-23 18:44:01.937] Waiting data available... [2025-09-23 18:44:01.937] 512+0 records in [2025-09-23 18:44:01.953] 512+0 records out [2025-09-23 18:44:01.969] Starting syslogd/klogd: done [2025-09-23 18:44:01.985] DML Start [2025-09-23 18:44:02.193] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:44:02.417] DML res1: 0 [2025-09-23 18:44:02.847] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:44:02.847] Read Success [2025-09-23 18:44:02.847] Verifying certificate... [2025-09-23 18:44:03.102] Verified OK [2025-09-23 18:44:03.118] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:44:04.684] Verified OK [2025-09-23 18:44:04.684] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:44:05.291] Verified OK [2025-09-23 18:44:05.291] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:44:08.073] fs.protected_hardlinks = 1 [2025-09-23 18:44:08.074] fs.protected_symlinks = 1 [2025-09-23 18:44:08.089] kernel.modules_disabled = 1 [2025-09-23 18:44:08.265] [2025-09-23 18:44:08.265] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:44:09.518] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:44:17.182] SBL1:1210.0.1.0 [2025-09-23 18:44:17.230] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:44:18.797] SBL2:1210.0.1.0 [2025-09-23 18:44:18.829] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:44:18.941] j-A [2025-09-23 18:44:26.314] The R5 Autosar Classic is running [2025-09-23 18:44:26.314] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:44:26.314] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:44:26.922] INIT: version 2.96 booting [2025-09-23 18:44:27.033] INIT: Entering runlevel: 5 [2025-09-23 18:44:27.194] mtd28 attached [2025-09-23 18:44:27.194] mtd24 attached [2025-09-23 18:44:27.210] mtd32 attached [2025-09-23 18:44:27.295] ubi0:animations is mounted. [2025-09-23 18:44:27.295] RTNETLINK answers: File exists [2025-09-23 18:44:27.295] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:44:27.295] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:44:27.295] ubi1:textures is mounted. [2025-09-23 18:44:27.295] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:44:27.295] ubi2:dml_code is mounted. [2025-09-23 18:44:27.295] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:44:27.295] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:44:27.320] data.LB_FadeInType0=100 [2025-09-23 18:44:27.320] data.CHLH_FadeInType0=0 [2025-09-23 18:44:27.320] data.WU_FadeInDelay=0 [2025-09-23 18:44:27.320] max_time_out=0 [2025-09-23 18:44:27.320] No splash screen [2025-09-23 18:44:27.320] stop dss Done [2025-09-23 18:44:27.386] /dev/mem opened. [2025-09-23 18:44:27.386] Memory mapped at address 0xffffb7ae8000. [2025-09-23 18:44:27.386] Read at address 0x00600018 (0xffffb7ae8018): 0x00000000 [2025-09-23 18:44:27.386] Write at address 0x00600018 (0xffffb7ae8018): 0x00400040, readback 0x00400040 [2025-09-23 18:44:27.386] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:44:27.402] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:44:27.595] Loaded PowerVR consumer services. [2025-09-23 18:44:27.643] 512+0 records in [2025-09-23 18:44:27.643] 512+0 records out [2025-09-23 18:44:27.675] Waiting data available... [2025-09-23 18:44:27.675] Starting syslogd/klogd: done [2025-09-23 18:44:27.691] DML Start [2025-09-23 18:44:27.867] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:44:28.090] DML res1: 0 [2025-09-23 18:44:28.602] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:44:28.618] Read Success [2025-09-23 18:44:28.618] Verifying certificate... [2025-09-23 18:44:28.842] Verified OK [2025-09-23 18:44:28.858] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:44:30.616] Verified OK [2025-09-23 18:44:30.616] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:44:31.217] Verified OK [2025-09-23 18:44:31.217] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:44:33.632] fs.protected_hardlinks = 1 [2025-09-23 18:44:33.648] fs.protected_symlinks = 1 [2025-09-23 18:44:33.648] kernel.modules_disabled = 1 [2025-09-23 18:44:33.856] [2025-09-23 18:44:33.856] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:44:35.189] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:44:42.885] SBL1:1210.0.1.0 [2025-09-23 18:44:42.933] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:44:44.500] SBL2:1210.0.1.0 [2025-09-23 18:44:44.547] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:44:44.643] j-A [2025-09-23 18:44:51.998] The R5 Autosar Classic is running [2025-09-23 18:44:52.020] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:44:52.020] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:44:52.628] INIT: version 2.96 booting [2025-09-23 18:44:52.740] INIT: Entering runlevel: 5 [2025-09-23 18:44:52.884] mtd24 attached [2025-09-23 18:44:52.900] mtd32 attached [2025-09-23 18:44:52.916] mtd28 attached [2025-09-23 18:44:52.964] ubi0:textures is mounted. [2025-09-23 18:44:52.964] RTNETLINK answers: File exists [2025-09-23 18:44:53.022] ubi2:animations is mounted. [2025-09-23 18:44:53.022] ubi1:dml_code is mounted. [2025-09-23 18:44:53.022] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:44:53.022] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:44:53.022] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:44:53.022] data.LB_FadeInType0=100 [2025-09-23 18:44:53.022] data.CHLH_FadeInType0=0 [2025-09-23 18:44:53.022] data.WU_FadeInDelay=0 [2025-09-23 18:44:53.022] max_time_out=0 [2025-09-23 18:44:53.022] No splash screen [2025-09-23 18:44:53.022] stop dss Done [2025-09-23 18:44:53.022] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:44:53.022] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:44:53.064] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:44:53.064] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:44:53.064] /dev/mem opened. [2025-09-23 18:44:53.064] Memory mapped at address 0xffff83b60000. [2025-09-23 18:44:53.090] Read at address 0x00600018 (0xffff83b60018): 0x00000000 [2025-09-23 18:44:53.090] Write at address 0x00600018 (0xffff83b60018): 0x00400040, readback 0x00400040 [2025-09-23 18:44:53.313] Loaded PowerVR consumer services. [2025-09-23 18:44:53.329] Waiting data available... [2025-09-23 18:44:53.346] 512+0 records in [2025-09-23 18:44:53.346] 512+0 records out [2025-09-23 18:44:53.394] Starting syslogd/klogd: done [2025-09-23 18:44:53.410] DML Start [2025-09-23 18:44:53.585] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:44:53.809] DML res1: 0 [2025-09-23 18:44:54.265] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:44:54.265] Read Success [2025-09-23 18:44:54.265] Verifying certificate... [2025-09-23 18:44:54.504] Verified OK [2025-09-23 18:44:54.520] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:44:56.276] Verified OK [2025-09-23 18:44:56.276] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:44:56.802] Verified OK [2025-09-23 18:44:56.802] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:44:59.313] fs.protected_hardlinks = 1 [2025-09-23 18:44:59.313] fs.protected_symlinks = 1 [2025-09-23 18:44:59.329] kernel.modules_disabled = 1 [2025-09-23 18:44:59.520] [2025-09-23 18:44:59.520] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:45:00.943] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:45:08.597] SBL1:1210.0.1.0 [2025-09-23 18:45:08.645] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:45:10.212] SBL2:1210.0.1.0 [2025-09-23 18:45:10.260] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:45:10.355] j-A [2025-09-23 18:45:17.711] The R5 Autosar Classic is running [2025-09-23 18:45:17.733] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:45:17.733] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:45:18.341] INIT: version 2.96 booting [2025-09-23 18:45:18.453] INIT: Entering runlevel: 5 [2025-09-23 18:45:18.612] mtd28 attached [2025-09-23 18:45:18.612] mtd32 attached [2025-09-23 18:45:18.628] mtd24 attached [2025-09-23 18:45:18.676] ubi0:animations is mounted. [2025-09-23 18:45:18.751] ubi2:textures is mounted. [2025-09-23 18:45:18.751] ubi1:dml_code is mounted. [2025-09-23 18:45:18.751] RTNETLINK answers: File exists [2025-09-23 18:45:18.751] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:45:18.751] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:45:18.751] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:45:18.751] data.LB_FadeInType0=100 [2025-09-23 18:45:18.751] data.CHLH_FadeInType0=0 [2025-09-23 18:45:18.751] data.WU_FadeInDelay=0 [2025-09-23 18:45:18.751] max_time_out=0 [2025-09-23 18:45:18.751] No splash screen [2025-09-23 18:45:18.751] stop dss Done [2025-09-23 18:45:18.751] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:45:18.751] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:45:18.783] /dev/mem opened. [2025-09-23 18:45:18.815] Memory mapped at address 0xffffa2b5c000. [2025-09-23 18:45:18.815] Read at address 0x00600018 (0xffffa2b5c018): 0x00000000 [2025-09-23 18:45:18.815] Write at address 0x00600018 (0xffffa2b5c018): 0x00400040, readback 0x00400040 [2025-09-23 18:45:18.815] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:45:18.831] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:45:18.958] Loaded PowerVR consumer services. [2025-09-23 18:45:19.084] Waiting data available... [2025-09-23 18:45:19.084] 512+0 records in [2025-09-23 18:45:19.084] 512+0 records out [2025-09-23 18:45:19.100] Starting syslogd/klogd: done [2025-09-23 18:45:19.116] DML Start [2025-09-23 18:45:19.260] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:45:19.485] DML res1: 0 [2025-09-23 18:45:20.008] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:45:20.008] Read Success [2025-09-23 18:45:20.008] Verifying certificate... [2025-09-23 18:45:20.263] Verified OK [2025-09-23 18:45:20.279] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:45:21.893] Verified OK [2025-09-23 18:45:21.893] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:45:22.539] Verified OK [2025-09-23 18:45:22.539] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:45:25.194] fs.protected_hardlinks = 1 [2025-09-23 18:45:25.194] fs.protected_symlinks = 1 [2025-09-23 18:45:25.211] kernel.modules_disabled = 1 [2025-09-23 18:45:25.418] [2025-09-23 18:45:25.418] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:45:26.609] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:45:34.330] SBL1:1210.0.1.0 [2025-09-23 18:45:34.362] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:45:35.944] SBL2:1210.0.1.0 [2025-09-23 18:45:35.976] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:45:36.088] j-A [2025-09-23 18:45:43.459] The R5 Autosar Classic is running [2025-09-23 18:45:43.459] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:45:43.459] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:45:44.067] INIT: version 2.96 booting [2025-09-23 18:45:44.179] INIT: Entering runlevel: 5 [2025-09-23 18:45:44.323] mtd24 attached [2025-09-23 18:45:44.339] mtd28 attached [2025-09-23 18:45:44.339] mtd32 attached [2025-09-23 18:45:44.387] RTNETLINK answers: File exists [2025-09-23 18:45:44.453] ubi0:textures is mounted. [2025-09-23 18:45:44.453] ubi1:animations is mounted. [2025-09-23 18:45:44.453] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:45:44.453] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:45:44.453] ubi2:dml_code is mounted. [2025-09-23 18:45:44.453] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:45:44.453] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:45:44.453] data.LB_FadeInType0=100 [2025-09-23 18:45:44.453] data.CHLH_FadeInType0=0 [2025-09-23 18:45:44.453] data.WU_FadeInDelay=0 [2025-09-23 18:45:44.453] max_time_out=0 [2025-09-23 18:45:44.453] No splash screen [2025-09-23 18:45:44.453] stop dss Done [2025-09-23 18:45:44.453] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:45:44.515] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:45:44.515] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:45:44.515] /dev/mem opened. [2025-09-23 18:45:44.515] Memory mapped at address 0xffff8e0e8000. [2025-09-23 18:45:44.515] Read at address 0x00600018 (0xffff8e0e8018): 0x00000000 [2025-09-23 18:45:44.515] Write at address 0x00600018 (0xffff8e0e8018): 0x00400040, readback 0x00400040 [2025-09-23 18:45:44.611] Loaded PowerVR consumer services. [2025-09-23 18:45:44.755] 512+0 records in [2025-09-23 18:45:44.755] 512+0 records out [2025-09-23 18:45:44.771] Waiting data available... [2025-09-23 18:45:44.803] Starting syslogd/klogd: done [2025-09-23 18:45:44.819] DML Start [2025-09-23 18:45:44.995] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:45:45.187] DML res1: 0 [2025-09-23 18:45:45.708] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:45:45.708] Read Success [2025-09-23 18:45:45.708] Verifying certificate... [2025-09-23 18:45:45.932] Verified OK [2025-09-23 18:45:45.948] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:45:47.635] Verified OK [2025-09-23 18:45:47.635] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:45:48.256] Verified OK [2025-09-23 18:45:48.256] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:45:50.846] fs.protected_hardlinks = 1 [2025-09-23 18:45:50.846] fs.protected_symlinks = 1 [2025-09-23 18:45:50.862] kernel.modules_disabled = 1 [2025-09-23 18:45:51.070] [2025-09-23 18:45:51.070] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:45:52.335] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:46:00.042] SBL1:1210.0.1.0 [2025-09-23 18:46:00.074] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:46:01.657] SBL2:1210.0.1.0 [2025-09-23 18:46:01.689] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:46:01.800] j-A [2025-09-23 18:46:09.173] The R5 Autosar Classic is running [2025-09-23 18:46:09.173] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:46:09.173] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:46:09.781] INIT: version 2.96 booting [2025-09-23 18:46:09.892] INIT: Entering runlevel: 5 [2025-09-23 18:46:10.052] mtd32 attached [2025-09-23 18:46:10.052] mtd28 attached [2025-09-23 18:46:10.068] mtd24 attached [2025-09-23 18:46:10.154] ubi0:dml_code is mounted. [2025-09-23 18:46:10.154] RTNETLINK answers: File exists [2025-09-23 18:46:10.154] ubi1:animations is mounted. [2025-09-23 18:46:10.154] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:46:10.154] ubi2:textures is mounted. [2025-09-23 18:46:10.154] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:46:10.154] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:46:10.154] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:46:10.154] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:46:10.178] data.LB_FadeInType0=100 [2025-09-23 18:46:10.178] data.CHLH_FadeInType0=0 [2025-09-23 18:46:10.178] data.WU_FadeInDelay=0 [2025-09-23 18:46:10.178] max_time_out=0 [2025-09-23 18:46:10.178] No splash screen [2025-09-23 18:46:10.178] stop dss Done [2025-09-23 18:46:10.226] /dev/mem opened. [2025-09-23 18:46:10.226] Memory mapped at address 0xffffa0b97000. [2025-09-23 18:46:10.266] Read at address 0x00600018 (0xffffa0b97018): 0x00000000 [2025-09-23 18:46:10.266] Write at address 0x00600018 (0xffffa0b97018): 0x00400040, readback 0x00400040 [2025-09-23 18:46:10.266] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:46:10.266] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:46:10.442] Loaded PowerVR consumer services. [2025-09-23 18:46:10.491] 512+0 records in [2025-09-23 18:46:10.491] 512+0 records out [2025-09-23 18:46:10.522] Waiting data available... [2025-09-23 18:46:10.538] Starting syslogd/klogd: done [2025-09-23 18:46:10.554] DML Start [2025-09-23 18:46:10.746] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:46:11.018] DML res1: 0 [2025-09-23 18:46:11.374] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:46:11.374] Read Success [2025-09-23 18:46:11.374] Verifying certificate... [2025-09-23 18:46:11.614] Verified OK [2025-09-23 18:46:11.647] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:46:13.331] Verified OK [2025-09-23 18:46:13.331] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:46:13.971] Verified OK [2025-09-23 18:46:13.971] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:46:16.690] fs.protected_hardlinks = 1 [2025-09-23 18:46:16.690] fs.protected_symlinks = 1 [2025-09-23 18:46:16.706] kernel.modules_disabled = 1 [2025-09-23 18:46:16.913] [2025-09-23 18:46:16.929] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:46:18.049] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:46:25.757] SBL1:1210.0.1.0 [2025-09-23 18:46:25.805] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:46:27.371] SBL2:1210.0.1.0 [2025-09-23 18:46:27.419] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:46:27.515] j-A [2025-09-23 18:46:34.870] The R5 Autosar Classic is running [2025-09-23 18:46:34.892] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:46:34.892] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:46:35.500] INIT: version 2.96 booting [2025-09-23 18:46:35.612] INIT: Entering runlevel: 5 [2025-09-23 18:46:35.772] mtd32 attached [2025-09-23 18:46:35.772] mtd24 attached [2025-09-23 18:46:35.787] mtd28 attached [2025-09-23 18:46:35.819] ubi0:dml_code is mounted. [2025-09-23 18:46:35.835] RTNETLINK answers: File exists [2025-09-23 18:46:35.893] ubi2:animations is mounted. [2025-09-23 18:46:35.893] ubi1:textures is mounted. [2025-09-23 18:46:35.893] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:46:35.893] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:46:35.893] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:46:35.893] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:46:35.893] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:46:35.893] data.LB_FadeInType0=100 [2025-09-23 18:46:35.893] data.CHLH_FadeInType0=0 [2025-09-23 18:46:35.893] data.WU_FadeInDelay=0 [2025-09-23 18:46:35.893] max_time_out=0 [2025-09-23 18:46:35.893] No splash screen [2025-09-23 18:46:35.893] stop dss Done [2025-09-23 18:46:35.941] /dev/mem opened. [2025-09-23 18:46:35.941] Memory mapped at address 0xffff9de22000. [2025-09-23 18:46:35.967] Read at address 0x00600018 (0xffff9de22018): 0x00000000 [2025-09-23 18:46:35.967] Write at address 0x00600018 (0xffff9de22018): 0x00400040, readback 0x00400040 [2025-09-23 18:46:35.967] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:46:35.983] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:46:36.175] Loaded PowerVR consumer services. [2025-09-23 18:46:36.223] 512+0 records in [2025-09-23 18:46:36.223] 512+0 records out [2025-09-23 18:46:36.255] Waiting data available... [2025-09-23 18:46:36.271] Starting syslogd/klogd: done [2025-09-23 18:46:36.287] DML Start [2025-09-23 18:46:36.495] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:46:36.703] DML res1: 0 [2025-09-23 18:46:37.108] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:46:37.108] Read Success [2025-09-23 18:46:37.108] Verifying certificate... [2025-09-23 18:46:37.332] Verified OK [2025-09-23 18:46:37.348] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:46:39.058] Verified OK [2025-09-23 18:46:39.058] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:46:39.631] Verified OK [2025-09-23 18:46:39.631] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:46:42.190] fs.protected_hardlinks = 1 [2025-09-23 18:46:42.206] fs.protected_symlinks = 1 [2025-09-23 18:46:42.206] kernel.modules_disabled = 1 [2025-09-23 18:46:42.413] [2025-09-23 18:46:42.413] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:46:43.820] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:46:51.493] SBL1:1210.0.1.0 [2025-09-23 18:46:51.525] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:46:53.108] SBL2:1210.0.1.0 [2025-09-23 18:46:53.140] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:46:53.252] j-A [2025-09-23 18:47:00.624] The R5 Autosar Classic is running [2025-09-23 18:47:00.624] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:47:00.624] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:47:01.232] INIT: version 2.96 booting [2025-09-23 18:47:01.344] INIT: Entering runlevel: 5 [2025-09-23 18:47:01.504] mtd32 attached [2025-09-23 18:47:01.504] mtd28 attached [2025-09-23 18:47:01.520] mtd24 attached [2025-09-23 18:47:01.568] RTNETLINK answers: File exists [2025-09-23 18:47:01.610] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:47:01.610] ubi1:animations is mounted. [2025-09-23 18:47:01.610] ubi0:dml_code is mounted. [2025-09-23 18:47:01.610] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:47:01.610] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:47:01.610] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:47:01.610] ubi2:textures is mounted. [2025-09-23 18:47:01.610] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:47:01.638] data.LB_FadeInType0=100 [2025-09-23 18:47:01.638] data.CHLH_FadeInType0=0 [2025-09-23 18:47:01.638] data.WU_FadeInDelay=0 [2025-09-23 18:47:01.638] max_time_out=0 [2025-09-23 18:47:01.638] No splash screen [2025-09-23 18:47:01.638] stop dss Done [2025-09-23 18:47:01.666] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:47:01.666] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:47:01.718] /dev/mem opened. [2025-09-23 18:47:01.718] Memory mapped at address 0xffffb9045000. [2025-09-23 18:47:01.718] Read at address 0x00600018 (0xffffb9045018): 0x00000000 [2025-09-23 18:47:01.718] Write at address 0x00600018 (0xffffb9045018): 0x00400040, readback 0x00400040 [2025-09-23 18:47:01.799] Loaded PowerVR consumer services. [2025-09-23 18:47:01.957] 512+0 records in [2025-09-23 18:47:01.957] 512+0 records out [2025-09-23 18:47:01.957] Waiting data available... [2025-09-23 18:47:01.989] Starting syslogd/klogd: done [2025-09-23 18:47:02.005] DML Start [2025-09-23 18:47:02.181] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:47:02.389] DML res1: 0 [2025-09-23 18:47:02.958] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:47:02.958] Read Success [2025-09-23 18:47:02.958] Verifying certificate... [2025-09-23 18:47:03.181] Verified OK [2025-09-23 18:47:03.197] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:47:04.996] Verified OK [2025-09-23 18:47:04.996] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:47:05.524] Verified OK [2025-09-23 18:47:05.524] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:47:08.066] fs.protected_hardlinks = 1 [2025-09-23 18:47:08.082] fs.protected_symlinks = 1 [2025-09-23 18:47:08.097] kernel.modules_disabled = 1 [2025-09-23 18:47:08.289] [2025-09-23 18:47:08.289] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:47:09.548] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:47:17.190] SBL1:1210.0.1.0 [2025-09-23 18:47:17.238] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:47:18.805] SBL2:1210.0.1.0 [2025-09-23 18:47:18.836] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:47:18.949] j-A [2025-09-23 18:47:26.323] The R5 Autosar Classic is running [2025-09-23 18:47:26.323] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:47:26.323] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:47:26.931] INIT: version 2.96 booting [2025-09-23 18:47:27.042] INIT: Entering runlevel: 5 [2025-09-23 18:47:27.203] mtd28 attached [2025-09-23 18:47:27.203] mtd32 attached [2025-09-23 18:47:27.219] mtd24 attached [2025-09-23 18:47:27.267] RTNETLINK answers: File exists [2025-09-23 18:47:27.306] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:47:27.306] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:47:27.306] ubi2:textures is mounted. [2025-09-23 18:47:27.306] ubi0:animations is mounted. [2025-09-23 18:47:27.306] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:47:27.306] ubi1:dml_code is mounted. [2025-09-23 18:47:27.306] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:47:27.306] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:47:27.335] data.LB_FadeInType0=100 [2025-09-23 18:47:27.335] data.CHLH_FadeInType0=0 [2025-09-23 18:47:27.335] data.WU_FadeInDelay=0 [2025-09-23 18:47:27.335] max_time_out=0 [2025-09-23 18:47:27.335] No splash screen [2025-09-23 18:47:27.335] stop dss Done [2025-09-23 18:47:27.351] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:47:27.367] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:47:27.383] /dev/mem opened. [2025-09-23 18:47:27.415] Memory mapped at address 0xffffb7794000. [2025-09-23 18:47:27.415] Read at address 0x00600018 (0xffffb7794018): 0x00000000 [2025-09-23 18:47:27.415] Write at address 0x00600018 (0xffffb7794018): 0x00400040, readback 0x00400040 [2025-09-23 18:47:27.607] Loaded PowerVR consumer services. [2025-09-23 18:47:27.623] 512+0 records in [2025-09-23 18:47:27.639] 512+0 records out [2025-09-23 18:47:27.655] Waiting data available... [2025-09-23 18:47:27.655] Starting syslogd/klogd: done [2025-09-23 18:47:27.671] DML Start [2025-09-23 18:47:27.831] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:47:28.103] DML res1: 0 [2025-09-23 18:47:28.556] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:47:28.556] Read Success [2025-09-23 18:47:28.556] Verifying certificate... [2025-09-23 18:47:28.796] Verified OK [2025-09-23 18:47:28.796] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:47:30.547] Verified OK [2025-09-23 18:47:30.547] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:47:31.138] Verified OK [2025-09-23 18:47:31.138] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:47:33.777] fs.protected_hardlinks = 1 [2025-09-23 18:47:33.793] fs.protected_symlinks = 1 [2025-09-23 18:47:33.793] kernel.modules_disabled = 1 [2025-09-23 18:47:34.001] [2025-09-23 18:47:34.001] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:47:35.143] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:47:42.925] SBL1:1210.0.1.0 [2025-09-23 18:47:42.957] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:47:44.540] SBL2:1210.0.1.0 [2025-09-23 18:47:44.572] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:47:44.684] j-A [2025-09-23 18:47:52.024] The R5 Autosar Classic is running [2025-09-23 18:47:52.049] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:47:52.049] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:47:52.656] INIT: version 2.96 booting [2025-09-23 18:47:52.768] INIT: Entering runlevel: 5 [2025-09-23 18:47:52.928] mtd24 attached [2025-09-23 18:47:52.928] mtd28 attached [2025-09-23 18:47:52.944] mtd32 attached [2025-09-23 18:47:52.991] RTNETLINK answers: File exists [2025-09-23 18:47:53.037] ubi0:textures is mounted. [2025-09-23 18:47:53.037] ubi1:animations is mounted. [2025-09-23 18:47:53.037] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:47:53.038] ubi2:dml_code is mounted. [2025-09-23 18:47:53.038] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:47:53.038] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:47:53.038] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:47:53.038] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:47:53.060] data.LB_FadeInType0=100 [2025-09-23 18:47:53.060] data.CHLH_FadeInType0=0 [2025-09-23 18:47:53.060] data.WU_FadeInDelay=0 [2025-09-23 18:47:53.060] max_time_out=0 [2025-09-23 18:47:53.060] No splash screen [2025-09-23 18:47:53.060] stop dss Done [2025-09-23 18:47:53.092] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:47:53.145] /dev/mem opened. [2025-09-23 18:47:53.145] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:47:53.145] Memory mapped at address 0xffffaecee000. [2025-09-23 18:47:53.145] Read at address 0x00600018 (0xffffaecee018): 0x00000000 [2025-09-23 18:47:53.145] Write at address 0x00600018 (0xffffaecee018): 0x00400040, readback 0x00400040 [2025-09-23 18:47:53.337] Loaded PowerVR consumer services. [2025-09-23 18:47:53.368] 512+0 records in [2025-09-23 18:47:53.368] 512+0 records out [2025-09-23 18:47:53.400] Waiting data available... [2025-09-23 18:47:53.416] Starting syslogd/klogd: done [2025-09-23 18:47:53.432] DML Start [2025-09-23 18:47:53.608] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:47:53.832] DML res1: 0 [2025-09-23 18:47:54.286] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:47:54.286] Read Success [2025-09-23 18:47:54.286] Verifying certificate... [2025-09-23 18:47:54.510] Verified OK [2025-09-23 18:47:54.510] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:47:56.186] Verified OK [2025-09-23 18:47:56.186] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:47:56.832] Verified OK [2025-09-23 18:47:56.832] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:47:59.439] fs.protected_hardlinks = 1 [2025-09-23 18:47:59.439] fs.protected_symlinks = 1 [2025-09-23 18:47:59.454] kernel.modules_disabled = 1 [2025-09-23 18:47:59.629] [2025-09-23 18:47:59.629] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:48:00.936] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:48:08.642] SBL1:1210.0.1.0 [2025-09-23 18:48:08.674] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:48:10.257] SBL2:1210.0.1.0 [2025-09-23 18:48:10.289] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:48:10.401] j-A [2025-09-23 18:48:17.741] The R5 Autosar Classic is running [2025-09-23 18:48:17.766] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:48:17.766] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:48:18.374] INIT: version 2.96 booting [2025-09-23 18:48:18.485] INIT: Entering runlevel: 5 [2025-09-23 18:48:18.646] mtd24 attached [2025-09-23 18:48:18.646] mtd28 attached [2025-09-23 18:48:18.661] mtd32 attached [2025-09-23 18:48:18.709] ubi0:textures is mounted. [2025-09-23 18:48:18.709] RTNETLINK answers: File exists [2025-09-23 18:48:18.750] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:48:18.750] ubi1:animations is mounted. [2025-09-23 18:48:18.750] ubi2:dml_code is mounted. [2025-09-23 18:48:18.750] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:48:18.750] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:48:18.750] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:48:18.750] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:48:18.771] data.LB_FadeInType0=100 [2025-09-23 18:48:18.771] data.CHLH_FadeInType0=0 [2025-09-23 18:48:18.771] data.WU_FadeInDelay=0 [2025-09-23 18:48:18.771] max_time_out=0 [2025-09-23 18:48:18.771] No splash screen [2025-09-23 18:48:18.771] stop dss Done [2025-09-23 18:48:18.787] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:48:18.803] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:48:18.858] /dev/mem opened. [2025-09-23 18:48:18.858] Memory mapped at address 0xffffb2ee4000. [2025-09-23 18:48:18.858] Read at address 0x00600018 (0xffffb2ee4018): 0x00000000 [2025-09-23 18:48:18.858] Write at address 0x00600018 (0xffffb2ee4018): 0x00400040, readback 0x00400040 [2025-09-23 18:48:19.033] Loaded PowerVR consumer services. [2025-09-23 18:48:19.097] 512+0 records in [2025-09-23 18:48:19.097] 512+0 records out [2025-09-23 18:48:19.113] Waiting data available... [2025-09-23 18:48:19.161] Starting syslogd/klogd: done [2025-09-23 18:48:19.177] DML Start [2025-09-23 18:48:19.353] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:48:19.593] DML res1: 0 [2025-09-23 18:48:20.006] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:48:20.006] Read Success [2025-09-23 18:48:20.006] Verifying certificate... [2025-09-23 18:48:20.261] Verified OK [2025-09-23 18:48:20.277] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:48:21.915] Verified OK [2025-09-23 18:48:21.915] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:48:22.474] Verified OK [2025-09-23 18:48:22.474] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:48:25.161] fs.protected_hardlinks = 1 [2025-09-23 18:48:25.177] fs.protected_symlinks = 1 [2025-09-23 18:48:25.177] kernel.modules_disabled = 1 [2025-09-23 18:48:25.369] [2025-09-23 18:48:25.369] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:48:26.696] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:48:34.384] SBL1:1210.0.1.0 [2025-09-23 18:48:34.416] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:48:35.997] SBL2:1210.0.1.0 [2025-09-23 18:48:36.030] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:48:36.142] j-A [2025-09-23 18:48:43.482] The R5 Autosar Classic is running [2025-09-23 18:48:43.513] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:48:43.513] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:48:44.121] INIT: version 2.96 booting [2025-09-23 18:48:44.232] INIT: Entering runlevel: 5 [2025-09-23 18:48:44.393] mtd32 attached [2025-09-23 18:48:44.409] mtd28 attached [2025-09-23 18:48:44.409] mtd24 attached [2025-09-23 18:48:44.456] RTNETLINK answers: File exists [2025-09-23 18:48:44.523] ubi1:animations is mounted. [2025-09-23 18:48:44.523] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:48:44.523] ubi0:dml_code is mounted. [2025-09-23 18:48:44.523] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:48:44.523] ubi2:textures is mounted. [2025-09-23 18:48:44.523] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:48:44.523] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:48:44.523] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:48:44.523] data.LB_FadeInType0=100 [2025-09-23 18:48:44.523] data.CHLH_FadeInType0=0 [2025-09-23 18:48:44.523] data.WU_FadeInDelay=0 [2025-09-23 18:48:44.523] max_time_out=0 [2025-09-23 18:48:44.523] No splash screen [2025-09-23 18:48:44.523] stop dss Done [2025-09-23 18:48:44.539] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:48:44.555] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:48:44.555] /dev/mem opened. [2025-09-23 18:48:44.587] Memory mapped at address 0xffff97e8d000. [2025-09-23 18:48:44.587] Read at address 0x00600018 (0xffff97e8d018): 0x00000000 [2025-09-23 18:48:44.587] Write at address 0x00600018 (0xffff97e8d018): 0x00400040, readback 0x00400040 [2025-09-23 18:48:44.684] Loaded PowerVR consumer services. [2025-09-23 18:48:44.827] Waiting data available... [2025-09-23 18:48:44.827] 512+0 records in [2025-09-23 18:48:44.827] 512+0 records out [2025-09-23 18:48:44.875] Starting syslogd/klogd: done [2025-09-23 18:48:44.891] DML Start [2025-09-23 18:48:45.083] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:48:45.339] DML res1: 0 [2025-09-23 18:48:45.707] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:48:45.728] Read Success [2025-09-23 18:48:45.728] Verifying certificate... [2025-09-23 18:48:45.999] Verified OK [2025-09-23 18:48:45.999] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:48:47.692] Verified OK [2025-09-23 18:48:47.692] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:48:48.300] Verified OK [2025-09-23 18:48:48.300] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:48:51.034] fs.protected_hardlinks = 1 [2025-09-23 18:48:51.034] fs.protected_symlinks = 1 [2025-09-23 18:48:51.034] kernel.modules_disabled = 1 [2025-09-23 18:48:51.225] [2025-09-23 18:48:51.225] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:48:52.415] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:49:00.109] SBL1:1210.0.1.0 [2025-09-23 18:49:00.141] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:49:01.725] SBL2:1210.0.1.0 [2025-09-23 18:49:01.757] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:49:01.868] j-A [2025-09-23 18:49:09.241] The R5 Autosar Classic is running [2025-09-23 18:49:09.241] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:49:09.241] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:49:09.848] INIT: version 2.96 booting [2025-09-23 18:49:09.945] INIT: Entering runlevel: 5 [2025-09-23 18:49:10.104] mtd24 attached [2025-09-23 18:49:10.120] mtd28 attached [2025-09-23 18:49:10.136] mtd32 attached [2025-09-23 18:49:10.237] RTNETLINK answers: File exists [2025-09-23 18:49:10.237] ubi0:textures is mounted. [2025-09-23 18:49:10.237] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:49:10.237] ubi2:dml_code is mounted. [2025-09-23 18:49:10.237] ubi1:animations is mounted. [2025-09-23 18:49:10.237] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:49:10.237] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:49:10.237] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:49:10.237] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:49:10.237] data.LB_FadeInType0=100 [2025-09-23 18:49:10.237] data.CHLH_FadeInType0=0 [2025-09-23 18:49:10.237] data.WU_FadeInDelay=0 [2025-09-23 18:49:10.237] max_time_out=0 [2025-09-23 18:49:10.237] No splash screen [2025-09-23 18:49:10.237] stop dss Done [2025-09-23 18:49:10.308] /dev/mem opened. [2025-09-23 18:49:10.308] Memory mapped at address 0xffffa8c52000. [2025-09-23 18:49:10.308] Read at address 0x00600018 (0xffffa8c52018): 0x00000000 [2025-09-23 18:49:10.308] Write at address 0x00600018 (0xffffa8c52018): 0x00400040, readback 0x00400040 [2025-09-23 18:49:10.308] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:49:10.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:49:10.452] Loaded PowerVR consumer services. [2025-09-23 18:49:10.563] Waiting data available... [2025-09-23 18:49:10.579] 512+0 records in [2025-09-23 18:49:10.579] 512+0 records out [2025-09-23 18:49:10.596] Starting syslogd/klogd: done [2025-09-23 18:49:10.628] DML Start [2025-09-23 18:49:10.820] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:49:11.027] DML res1: 0 [2025-09-23 18:49:11.538] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:49:11.538] Read Success [2025-09-23 18:49:11.538] Verifying certificate... [2025-09-23 18:49:11.778] Verified OK [2025-09-23 18:49:11.810] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:49:13.354] Verified OK [2025-09-23 18:49:13.354] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:49:13.866] Verified OK [2025-09-23 18:49:13.882] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:49:16.616] fs.protected_hardlinks = 1 [2025-09-23 18:49:16.616] fs.protected_symlinks = 1 [2025-09-23 18:49:16.632] kernel.modules_disabled = 1 [2025-09-23 18:49:16.840] [2025-09-23 18:49:16.840] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:49:18.078] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:49:25.817] SBL1:1210.0.1.0 [2025-09-23 18:49:25.849] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:49:27.432] SBL2:1210.0.1.0 [2025-09-23 18:49:27.464] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:49:27.576] j-A [2025-09-23 18:49:34.949] The R5 Autosar Classic is running [2025-09-23 18:49:34.949] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:49:34.949] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:49:35.556] INIT: version 2.96 booting [2025-09-23 18:49:35.669] INIT: Entering runlevel: 5 [2025-09-23 18:49:35.828] mtd32 attached [2025-09-23 18:49:35.828] mtd24 attached [2025-09-23 18:49:35.844] mtd28 attached [2025-09-23 18:49:35.892] RTNETLINK answers: File exists [2025-09-23 18:49:35.965] ubi2:animations is mounted. [2025-09-23 18:49:35.965] ubi0:dml_code is mounted. [2025-09-23 18:49:35.965] ubi1:textures is mounted. [2025-09-23 18:49:35.965] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:49:35.965] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:49:35.965] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:49:35.965] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:49:35.965] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:49:35.965] data.LB_FadeInType0=100 [2025-09-23 18:49:35.965] data.CHLH_FadeInType0=0 [2025-09-23 18:49:35.965] data.WU_FadeInDelay=0 [2025-09-23 18:49:35.965] max_time_out=0 [2025-09-23 18:49:35.965] No splash screen [2025-09-23 18:49:35.965] stop dss Done [2025-09-23 18:49:36.013] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:49:36.052] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:49:36.052] /dev/mem opened. [2025-09-23 18:49:36.052] Memory mapped at address 0xffff87e1a000. [2025-09-23 18:49:36.052] Read at address 0x00600018 (0xffff87e1a018): 0x00000000 [2025-09-23 18:49:36.052] Write at address 0x00600018 (0xffff87e1a018): 0x00400040, readback 0x00400040 [2025-09-23 18:49:36.132] Loaded PowerVR consumer services. [2025-09-23 18:49:36.260] 512+0 records in [2025-09-23 18:49:36.260] 512+0 records out [2025-09-23 18:49:36.292] Waiting data available... [2025-09-23 18:49:36.307] Starting syslogd/klogd: done [2025-09-23 18:49:36.339] DML Start [2025-09-23 18:49:36.499] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:49:36.739] DML res1: 0 [2025-09-23 18:49:37.187] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:49:37.209] Read Success [2025-09-23 18:49:37.209] Verifying certificate... [2025-09-23 18:49:37.448] Verified OK [2025-09-23 18:49:37.464] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:49:39.144] Verified OK [2025-09-23 18:49:39.144] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:49:39.747] Verified OK [2025-09-23 18:49:39.747] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:49:42.419] fs.protected_hardlinks = 1 [2025-09-23 18:49:42.435] fs.protected_symlinks = 1 [2025-09-23 18:49:42.435] kernel.modules_disabled = 1 [2025-09-23 18:49:42.626] [2025-09-23 18:49:42.626] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:49:43.845] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:49:51.522] SBL1:1210.0.1.0 [2025-09-23 18:49:51.570] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:49:53.137] SBL2:1210.0.1.0 [2025-09-23 18:49:53.185] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:49:53.280] j-A [2025-09-23 18:50:00.635] The R5 Autosar Classic is running [2025-09-23 18:50:00.657] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:50:00.657] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:50:01.265] INIT: version 2.96 booting [2025-09-23 18:50:01.377] INIT: Entering runlevel: 5 [2025-09-23 18:50:01.537] mtd28 attached [2025-09-23 18:50:01.552] mtd24 attached [2025-09-23 18:50:01.568] mtd32 attached [2025-09-23 18:50:01.600] RTNETLINK answers: File exists [2025-09-23 18:50:01.671] ubi1:textures is mounted. [2025-09-23 18:50:01.671] ubi0:animations is mounted. [2025-09-23 18:50:01.671] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:50:01.671] ubi2:dml_code is mounted. [2025-09-23 18:50:01.671] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:50:01.671] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:50:01.671] data.LB_FadeInType0=100 [2025-09-23 18:50:01.671] data.CHLH_FadeInType0=0 [2025-09-23 18:50:01.671] data.WU_FadeInDelay=0 [2025-09-23 18:50:01.671] max_time_out=0 [2025-09-23 18:50:01.671] No splash screen [2025-09-23 18:50:01.671] stop dss Done [2025-09-23 18:50:01.671] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:50:01.671] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:50:01.747] /dev/mem opened. [2025-09-23 18:50:01.747] Memory mapped at address 0xffff85698000. [2025-09-23 18:50:01.747] Read at address 0x00600018 (0xffff85698018): 0x00000000 [2025-09-23 18:50:01.747] Write at address 0x00600018 (0xffff85698018): 0x00400040, readback 0x00400040 [2025-09-23 18:50:01.747] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:50:01.747] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:50:01.939] Loaded PowerVR consumer services. [2025-09-23 18:50:01.986] Waiting data available... [2025-09-23 18:50:02.002] 512+0 records in [2025-09-23 18:50:02.002] 512+0 records out [2025-09-23 18:50:02.034] Starting syslogd/klogd: done [2025-09-23 18:50:02.050] DML Start [2025-09-23 18:50:02.179] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:50:02.483] DML res1: 0 [2025-09-23 18:50:02.903] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:50:02.903] Read Success [2025-09-23 18:50:02.903] Verifying certificate... [2025-09-23 18:50:03.143] Verified OK [2025-09-23 18:50:03.159] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:50:04.870] Verified OK [2025-09-23 18:50:04.870] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:50:05.557] Verified OK [2025-09-23 18:50:05.557] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:50:08.229] fs.protected_hardlinks = 1 [2025-09-23 18:50:08.229] fs.protected_symlinks = 1 [2025-09-23 18:50:08.244] kernel.modules_disabled = 1 [2025-09-23 18:50:08.436] [2025-09-23 18:50:08.436] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:50:09.548] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:50:17.258] SBL1:1210.0.1.0 [2025-09-23 18:50:17.290] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:50:18.873] SBL2:1210.0.1.0 [2025-09-23 18:50:18.905] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:50:19.016] j-A [2025-09-23 18:50:26.355] The R5 Autosar Classic is running [2025-09-23 18:50:26.380] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:50:26.380] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:50:26.988] INIT: version 2.96 booting [2025-09-23 18:50:27.100] INIT: Entering runlevel: 5 [2025-09-23 18:50:27.243] mtd28 attached [2025-09-23 18:50:27.259] mtd24 attached [2025-09-23 18:50:27.275] mtd32 attached [2025-09-23 18:50:27.382] RTNETLINK answers: File exists [2025-09-23 18:50:27.382] ubi1:textures is mounted. [2025-09-23 18:50:27.382] ubi0:animations is mounted. [2025-09-23 18:50:27.382] ubi2:dml_code is mounted. [2025-09-23 18:50:27.382] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:50:27.382] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:50:27.382] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:50:27.382] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:50:27.382] data.LB_FadeInType0=100 [2025-09-23 18:50:27.382] data.CHLH_FadeInType0=0 [2025-09-23 18:50:27.382] data.WU_FadeInDelay=0 [2025-09-23 18:50:27.382] max_time_out=0 [2025-09-23 18:50:27.382] No splash screen [2025-09-23 18:50:27.382] stop dss Done [2025-09-23 18:50:27.382] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:50:27.430] /dev/mem opened. [2025-09-23 18:50:27.430] Memory mapped at address 0xffff9fd27000. [2025-09-23 18:50:27.463] Read at address 0x00600018 (0xffff9fd27018): 0x00000000 [2025-09-23 18:50:27.463] Write at address 0x00600018 (0xffff9fd27018): 0x00400040, readback 0x00400040 [2025-09-23 18:50:27.463] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:50:27.463] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:50:27.654] Loaded PowerVR consumer services. [2025-09-23 18:50:27.686] 512+0 records in [2025-09-23 18:50:27.686] 512+0 records out [2025-09-23 18:50:27.719] Waiting data available... [2025-09-23 18:50:27.719] Starting syslogd/klogd: done [2025-09-23 18:50:27.735] DML Start [2025-09-23 18:50:27.958] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:50:28.214] DML res1: 0 [2025-09-23 18:50:28.559] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:50:28.559] Read Success [2025-09-23 18:50:28.559] Verifying certificate... [2025-09-23 18:50:28.814] Verified OK [2025-09-23 18:50:28.846] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:50:30.470] Verified OK [2025-09-23 18:50:30.470] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:50:31.125] Verified OK [2025-09-23 18:50:31.125] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:50:33.796] fs.protected_hardlinks = 1 [2025-09-23 18:50:33.812] fs.protected_symlinks = 1 [2025-09-23 18:50:33.812] kernel.modules_disabled = 1 [2025-09-23 18:50:34.004] [2025-09-23 18:50:34.004] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:50:35.265] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:50:42.967] SBL1:1210.0.1.0 [2025-09-23 18:50:43.014] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:50:44.581] SBL2:1210.0.1.0 [2025-09-23 18:50:44.613] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:50:44.726] j-A [2025-09-23 18:50:52.100] The R5 Autosar Classic is running [2025-09-23 18:50:52.100] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:50:52.100] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:50:52.708] INIT: version 2.96 booting [2025-09-23 18:50:52.820] INIT: Entering runlevel: 5 [2025-09-23 18:50:52.980] mtd32 attached [2025-09-23 18:50:52.980] mtd28 attached [2025-09-23 18:50:52.996] mtd24 attached [2025-09-23 18:50:53.081] RTNETLINK answers: File exists [2025-09-23 18:50:53.081] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:50:53.081] ubi0:dml_code is mounted. [2025-09-23 18:50:53.081] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:50:53.081] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:50:53.081] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:50:53.081] ubi1:animations is mounted. [2025-09-23 18:50:53.081] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:50:53.081] ubi2:textures is mounted. [2025-09-23 18:50:53.097] data.LB_FadeInType0=100 [2025-09-23 18:50:53.118] data.CHLH_FadeInType0=0 [2025-09-23 18:50:53.118] data.WU_FadeInDelay=0 [2025-09-23 18:50:53.118] max_time_out=0 [2025-09-23 18:50:53.118] No splash screen [2025-09-23 18:50:53.118] stop dss Done [2025-09-23 18:50:53.118] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:50:53.141] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:50:53.189] /dev/mem opened. [2025-09-23 18:50:53.189] Memory mapped at address 0xffffbe67b000. [2025-09-23 18:50:53.189] Read at address 0x00600018 (0xffffbe67b018): 0x00000000 [2025-09-23 18:50:53.189] Write at address 0x00600018 (0xffffbe67b018): 0x00400040, readback 0x00400040 [2025-09-23 18:50:53.285] Loaded PowerVR consumer services. [2025-09-23 18:50:53.430] 512+0 records in [2025-09-23 18:50:53.430] 512+0 records out [2025-09-23 18:50:53.445] Waiting data available... [2025-09-23 18:50:53.477] Starting syslogd/klogd: done [2025-09-23 18:50:53.493] DML Start [2025-09-23 18:50:53.653] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:50:53.893] DML res1: 0 [2025-09-23 18:50:54.370] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:50:54.370] Read Success [2025-09-23 18:50:54.370] Verifying certificate... [2025-09-23 18:50:54.593] Verified OK [2025-09-23 18:50:54.609] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:50:56.295] Verified OK [2025-09-23 18:50:56.295] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:50:56.887] Verified OK [2025-09-23 18:50:56.903] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:50:59.462] fs.protected_hardlinks = 1 [2025-09-23 18:50:59.477] fs.protected_symlinks = 1 [2025-09-23 18:50:59.477] kernel.modules_disabled = 1 [2025-09-23 18:50:59.670] [2025-09-23 18:50:59.670] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:51:00.979] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:51:08.664] SBL1:1210.0.1.0 [2025-09-23 18:51:08.712] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:51:10.279] SBL2:1210.0.1.0 [2025-09-23 18:51:10.327] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:51:10.423] j-A [2025-09-23 18:51:17.778] The R5 Autosar Classic is running [2025-09-23 18:51:17.799] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:51:17.799] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:51:18.406] INIT: version 2.96 booting [2025-09-23 18:51:18.519] INIT: Entering runlevel: 5 [2025-09-23 18:51:18.663] mtd24 attached [2025-09-23 18:51:18.678] mtd28 attached [2025-09-23 18:51:18.710] mtd32 attached [2025-09-23 18:51:18.710] ubi0:textures is mounted. [2025-09-23 18:51:18.726] ubi1:animations is mounted. [2025-09-23 18:51:18.743] RTNETLINK answers: File exists [2025-09-23 18:51:18.768] ubi2:dml_code is mounted. [2025-09-23 18:51:18.768] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:51:18.768] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:51:18.801] data.LB_FadeInType0=100 [2025-09-23 18:51:18.801] data.CHLH_FadeInType0=0 [2025-09-23 18:51:18.801] data.WU_FadeInDelay=0 [2025-09-23 18:51:18.801] max_time_out=0 [2025-09-23 18:51:18.801] No splash screen [2025-09-23 18:51:18.801] stop dss Done [2025-09-23 18:51:18.801] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:51:18.801] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:51:18.801] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:51:18.871] /dev/mem opened. [2025-09-23 18:51:18.871] Memory mapped at address 0xffff832f4000. [2025-09-23 18:51:18.871] Read at address 0x00600018 (0xffff832f4018): 0x00000000 [2025-09-23 18:51:18.871] Write at address 0x00600018 (0xffff832f4018): 0x00400040, readback 0x00400040 [2025-09-23 18:51:18.887] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:51:18.903] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:51:19.015] Loaded PowerVR consumer services. [2025-09-23 18:51:19.140] Waiting data available... [2025-09-23 18:51:19.140] 512+0 records in [2025-09-23 18:51:19.140] 512+0 records out [2025-09-23 18:51:19.172] Starting syslogd/klogd: done [2025-09-23 18:51:19.188] DML Start [2025-09-23 18:51:19.364] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:51:19.571] DML res1: 0 [2025-09-23 18:51:19.995] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:51:19.995] Read Success [2025-09-23 18:51:19.995] Verifying certificate... [2025-09-23 18:51:20.267] Verified OK [2025-09-23 18:51:20.299] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:51:22.025] Verified OK [2025-09-23 18:51:22.025] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:51:22.639] Verified OK [2025-09-23 18:51:22.639] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:51:25.278] fs.protected_hardlinks = 1 [2025-09-23 18:51:25.294] fs.protected_symlinks = 1 [2025-09-23 18:51:25.294] kernel.modules_disabled = 1 [2025-09-23 18:51:25.501] [2025-09-23 18:51:25.501] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:51:26.684] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:51:34.390] SBL1:1210.0.1.0 [2025-09-23 18:51:34.438] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:51:36.005] SBL2:1210.0.1.0 [2025-09-23 18:51:36.036] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:51:36.149] j-A [2025-09-23 18:51:43.524] The R5 Autosar Classic is running [2025-09-23 18:51:43.524] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:51:43.524] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:51:44.131] INIT: version 2.96 booting [2025-09-23 18:51:44.243] INIT: Entering runlevel: 5 [2025-09-23 18:51:44.403] mtd32 attached [2025-09-23 18:51:44.403] mtd28 attached [2025-09-23 18:51:44.419] mtd24 attached [2025-09-23 18:51:44.467] ubi0:dml_code is mounted. [2025-09-23 18:51:44.467] RTNETLINK answers: File exists [2025-09-23 18:51:44.505] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:51:44.505] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:51:44.505] ubi1:animations is mounted. [2025-09-23 18:51:44.505] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:51:44.505] ubi2:textures is mounted. [2025-09-23 18:51:44.505] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:51:44.505] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:51:44.531] data.LB_FadeInType0=100 [2025-09-23 18:51:44.531] data.CHLH_FadeInType0=0 [2025-09-23 18:51:44.531] data.WU_FadeInDelay=0 [2025-09-23 18:51:44.531] max_time_out=0 [2025-09-23 18:51:44.531] No splash screen [2025-09-23 18:51:44.531] stop dss Done [2025-09-23 18:51:44.547] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:51:44.563] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:51:44.618] /dev/mem opened. [2025-09-23 18:51:44.618] Memory mapped at address 0xffff90edd000. [2025-09-23 18:51:44.618] Read at address 0x00600018 (0xffff90edd018): 0x00000000 [2025-09-23 18:51:44.618] Write at address 0x00600018 (0xffff90edd018): 0x00400040, readback 0x00400040 [2025-09-23 18:51:44.729] Loaded PowerVR consumer services. [2025-09-23 18:51:44.842] Waiting data available... [2025-09-23 18:51:44.858] 512+0 records in [2025-09-23 18:51:44.858] 512+0 records out [2025-09-23 18:51:44.906] Starting syslogd/klogd: done [2025-09-23 18:51:44.922] DML Start [2025-09-23 18:51:45.065] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:51:45.321] DML res1: 0 [2025-09-23 18:51:45.784] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:51:45.784] Read Success [2025-09-23 18:51:45.784] Verifying certificate... [2025-09-23 18:51:46.008] Verified OK [2025-09-23 18:51:46.039] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:51:47.748] Verified OK [2025-09-23 18:51:47.748] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:51:48.355] Verified OK [2025-09-23 18:51:48.355] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:51:51.010] fs.protected_hardlinks = 1 [2025-09-23 18:51:51.026] fs.protected_symlinks = 1 [2025-09-23 18:51:51.026] kernel.modules_disabled = 1 [2025-09-23 18:51:51.217] [2025-09-23 18:51:51.217] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:51:52.422] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:52:00.103] SBL1:1210.0.1.0 [2025-09-23 18:52:00.151] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:52:01.717] SBL2:1210.0.1.0 [2025-09-23 18:52:01.749] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:52:01.862] j-A [2025-09-23 18:52:09.237] The R5 Autosar Classic is running [2025-09-23 18:52:09.237] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:52:09.237] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:52:09.845] INIT: version 2.96 booting [2025-09-23 18:52:09.957] INIT: Entering runlevel: 5 [2025-09-23 18:52:10.117] mtd24 attached [2025-09-23 18:52:10.117] mtd32 attached [2025-09-23 18:52:10.132] mtd28 attached [2025-09-23 18:52:10.181] ubi0:textures is mounted. [2025-09-23 18:52:10.242] RTNETLINK answers: File exists [2025-09-23 18:52:10.242] ubi1:dml_code is mounted. [2025-09-23 18:52:10.242] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:52:10.242] ubi2:animations is mounted. [2025-09-23 18:52:10.242] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:52:10.242] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:52:10.242] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:52:10.242] data.LB_FadeInType0=100 [2025-09-23 18:52:10.242] data.CHLH_FadeInType0=0 [2025-09-23 18:52:10.242] data.WU_FadeInDelay=0 [2025-09-23 18:52:10.242] max_time_out=0 [2025-09-23 18:52:10.242] No splash screen [2025-09-23 18:52:10.242] stop dss Done [2025-09-23 18:52:10.242] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:52:10.312] /dev/mem opened. [2025-09-23 18:52:10.312] Memory mapped at address 0xffff9a7dd000. [2025-09-23 18:52:10.312] Read at address 0x00600018 (0xffff9a7dd018): 0x00000000 [2025-09-23 18:52:10.312] Write at address 0x00600018 (0xffff9a7dd018): 0x00400040, readback 0x00400040 [2025-09-23 18:52:10.328] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:52:10.344] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:52:10.441] Loaded PowerVR consumer services. [2025-09-23 18:52:10.568] Waiting data available... [2025-09-23 18:52:10.568] 512+0 records in [2025-09-23 18:52:10.568] 512+0 records out [2025-09-23 18:52:10.616] Starting syslogd/klogd: done [2025-09-23 18:52:10.632] DML Start [2025-09-23 18:52:10.792] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:52:11.016] DML res1: 0 [2025-09-23 18:52:11.528] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:52:11.528] Read Success [2025-09-23 18:52:11.544] Verifying certificate... [2025-09-23 18:52:11.847] Verified OK [2025-09-23 18:52:11.879] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:52:13.521] Verified OK [2025-09-23 18:52:13.521] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:52:14.122] Verified OK [2025-09-23 18:52:14.122] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:52:16.760] fs.protected_hardlinks = 1 [2025-09-23 18:52:16.776] fs.protected_symlinks = 1 [2025-09-23 18:52:16.776] kernel.modules_disabled = 1 [2025-09-23 18:52:16.967] [2025-09-23 18:52:16.967] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:52:18.110] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:52:25.818] SBL1:1210.0.1.0 [2025-09-23 18:52:25.866] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:52:27.433] SBL2:1210.0.1.0 [2025-09-23 18:52:27.481] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 18:52:27.576] j-A [2025-09-23 18:52:34.932] The R5 Autosar Classic is running [2025-09-23 18:52:34.932] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:52:34.953] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:52:35.560] INIT: version 2.96 booting [2025-09-23 18:52:35.672] INIT: Entering runlevel: 5 [2025-09-23 18:52:35.832] mtd24 attached [2025-09-23 18:52:35.832] mtd28 attached [2025-09-23 18:52:35.848] mtd32 attached [2025-09-23 18:52:35.880] ubi0:textures is mounted. [2025-09-23 18:52:35.896] RTNETLINK answers: File exists [2025-09-23 18:52:35.965] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:52:35.965] ubi1:animations is mounted. [2025-09-23 18:52:35.965] ubi2:dml_code is mounted. [2025-09-23 18:52:35.965] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:52:35.965] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:52:35.965] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:52:35.965] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:52:35.965] data.LB_FadeInType0=100 [2025-09-23 18:52:35.965] data.CHLH_FadeInType0=0 [2025-09-23 18:52:35.965] data.WU_FadeInDelay=0 [2025-09-23 18:52:35.965] max_time_out=0 [2025-09-23 18:52:35.965] No splash screen [2025-09-23 18:52:35.965] stop dss Done [2025-09-23 18:52:36.039] /dev/mem opened. [2025-09-23 18:52:36.039] Memory mapped at address 0xffffaddd5000. [2025-09-23 18:52:36.039] Read at address 0x00600018 (0xffffaddd5018): 0x00000000 [2025-09-23 18:52:36.039] Write at address 0x00600018 (0xffffaddd5018): 0x00400040, readback 0x00400040 [2025-09-23 18:52:36.039] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:52:36.039] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:52:36.231] Loaded PowerVR consumer services. [2025-09-23 18:52:36.263] 512+0 records in [2025-09-23 18:52:36.263] 512+0 records out [2025-09-23 18:52:36.295] Waiting data available... [2025-09-23 18:52:36.311] Starting syslogd/klogd: done [2025-09-23 18:52:36.327] DML Start [2025-09-23 18:52:36.518] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:52:36.759] DML res1: 0 [2025-09-23 18:52:37.164] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:52:37.164] Read Success [2025-09-23 18:52:37.164] Verifying certificate... [2025-09-23 18:52:37.452] Verified OK [2025-09-23 18:52:37.468] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:52:39.286] Verified OK [2025-09-23 18:52:39.286] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:52:39.808] Verified OK [2025-09-23 18:52:39.808] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:52:42.175] fs.protected_hardlinks = 1 [2025-09-23 18:52:42.190] fs.protected_symlinks = 1 [2025-09-23 18:52:42.206] kernel.modules_disabled = 1 [2025-09-23 18:52:42.398] [2025-09-23 18:52:42.398] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:52:43.821] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:52:51.532] SBL1:1210.0.1.0 [2025-09-23 18:52:51.564] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:52:53.147] SBL2:1210.0.1.0 [2025-09-23 18:52:53.179] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 18:52:53.292] j-A [2025-09-23 18:53:00.631] The R5 Autosar Classic is running [2025-09-23 18:53:00.663] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:53:00.663] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:53:01.270] INIT: version 2.96 booting [2025-09-23 18:53:01.381] INIT: Entering runlevel: 5 [2025-09-23 18:53:01.526] mtd24 attached [2025-09-23 18:53:01.542] mtd28 attached [2025-09-23 18:53:01.558] mtd32 attached [2025-09-23 18:53:01.590] ubi0:textures is mounted. [2025-09-23 18:53:01.671] ubi2:dml_code is mounted. [2025-09-23 18:53:01.671] ubi1:animations is mounted. [2025-09-23 18:53:01.671] RTNETLINK answers: File exists [2025-09-23 18:53:01.671] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:53:01.671] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:53:01.671] data.LB_FadeInType0=100 [2025-09-23 18:53:01.671] data.CHLH_FadeInType0=0 [2025-09-23 18:53:01.671] data.WU_FadeInDelay=0 [2025-09-23 18:53:01.671] max_time_out=0 [2025-09-23 18:53:01.671] No splash screen [2025-09-23 18:53:01.671] stop dss Done [2025-09-23 18:53:01.671] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:53:01.671] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:53:01.671] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:53:01.735] /dev/mem opened. [2025-09-23 18:53:01.735] Memory mapped at address 0xffffa3472000. [2025-09-23 18:53:01.735] Read at address 0x00600018 (0xffffa3472018): 0x00000000 [2025-09-23 18:53:01.735] Write at address 0x00600018 (0xffffa3472018): 0x00400040, readback 0x00400040 [2025-09-23 18:53:01.784] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:53:01.784] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:53:01.960] Loaded PowerVR consumer services. [2025-09-23 18:53:01.991] Waiting data available... [2025-09-23 18:53:02.007] 512+0 records in [2025-09-23 18:53:02.007] 512+0 records out [2025-09-23 18:53:02.055] Starting syslogd/klogd: done [2025-09-23 18:53:02.055] DML Start [2025-09-23 18:53:02.199] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:53:02.423] DML res1: 0 [2025-09-23 18:53:02.902] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:53:02.902] Read Success [2025-09-23 18:53:02.902] Verifying certificate... [2025-09-23 18:53:03.158] Verified OK [2025-09-23 18:53:03.174] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:53:04.939] Verified OK [2025-09-23 18:53:04.939] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:53:05.562] Verified OK [2025-09-23 18:53:05.562] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:53:08.201] fs.protected_hardlinks = 1 [2025-09-23 18:53:08.217] fs.protected_symlinks = 1 [2025-09-23 18:53:08.217] kernel.modules_disabled = 1 [2025-09-23 18:53:08.424] [2025-09-23 18:53:08.424] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:53:09.538] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:53:17.246] SBL1:1210.0.1.0 [2025-09-23 18:53:17.294] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:53:18.861] SBL2:1210.0.1.0 [2025-09-23 18:53:18.893] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:53:19.005] j-A [2025-09-23 18:53:26.381] The R5 Autosar Classic is running [2025-09-23 18:53:26.381] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:53:26.381] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:53:26.988] INIT: version 2.96 booting [2025-09-23 18:53:27.100] INIT: Entering runlevel: 5 [2025-09-23 18:53:27.261] mtd24 attached [2025-09-23 18:53:27.261] mtd28 attached [2025-09-23 18:53:27.277] mtd32 attached [2025-09-23 18:53:27.324] RTNETLINK answers: File exists [2025-09-23 18:53:27.375] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:53:27.375] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:53:27.375] ubi2:dml_code is mounted. [2025-09-23 18:53:27.375] ubi0:textures is mounted. [2025-09-23 18:53:27.375] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:53:27.375] ubi1:animations is mounted. [2025-09-23 18:53:27.375] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:53:27.375] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:53:27.375] data.LB_FadeInType0=100 [2025-09-23 18:53:27.375] data.CHLH_FadeInType0=0 [2025-09-23 18:53:27.395] data.WU_FadeInDelay=0 [2025-09-23 18:53:27.395] max_time_out=0 [2025-09-23 18:53:27.395] No splash screen [2025-09-23 18:53:27.395] stop dss Done [2025-09-23 18:53:27.427] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:53:27.443] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:53:27.443] /dev/mem opened. [2025-09-23 18:53:27.475] Memory mapped at address 0xffff8122a000. [2025-09-23 18:53:27.475] Read at address 0x00600018 (0xffff8122a018): 0x00000000 [2025-09-23 18:53:27.475] Write at address 0x00600018 (0xffff8122a018): 0x00400040, readback 0x00400040 [2025-09-23 18:53:27.651] Loaded PowerVR consumer services. [2025-09-23 18:53:27.715] 512+0 records in [2025-09-23 18:53:27.715] 512+0 records out [2025-09-23 18:53:27.715] Waiting data available... [2025-09-23 18:53:27.746] Starting syslogd/klogd: done [2025-09-23 18:53:27.762] DML Start [2025-09-23 18:53:27.955] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:53:28.227] DML res1: 0 [2025-09-23 18:53:28.578] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:53:28.578] Read Success [2025-09-23 18:53:28.594] Verifying certificate... [2025-09-23 18:53:28.867] Verified OK [2025-09-23 18:53:28.882] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:53:30.583] Verified OK [2025-09-23 18:53:30.583] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:53:31.175] Verified OK [2025-09-23 18:53:31.191] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:53:33.733] fs.protected_hardlinks = 1 [2025-09-23 18:53:33.749] fs.protected_symlinks = 1 [2025-09-23 18:53:33.749] kernel.modules_disabled = 1 [2025-09-23 18:53:33.941] [2025-09-23 18:53:33.941] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:53:35.274] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:53:42.950] SBL1:1210.0.1.0 [2025-09-23 18:53:42.998] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:53:44.565] SBL2:1210.0.1.0 [2025-09-23 18:53:44.596] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:53:44.708] j-A [2025-09-23 18:53:52.085] The R5 Autosar Classic is running [2025-09-23 18:53:52.085] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:53:52.085] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:53:52.692] INIT: version 2.96 booting [2025-09-23 18:53:52.804] INIT: Entering runlevel: 5 [2025-09-23 18:53:52.948] mtd24 attached [2025-09-23 18:53:52.964] mtd32 attached [2025-09-23 18:53:52.980] mtd28 attached [2025-09-23 18:53:53.083] ubi0:textures is mounted. [2025-09-23 18:53:53.083] ubi1:dml_code is mounted. [2025-09-23 18:53:53.083] RTNETLINK answers: File exists [2025-09-23 18:53:53.083] ubi2:animations is mounted. [2025-09-23 18:53:53.083] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:53:53.083] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:53:53.083] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:53:53.083] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:53:53.083] data.LB_FadeInType0=100 [2025-09-23 18:53:53.083] data.CHLH_FadeInType0=0 [2025-09-23 18:53:53.083] data.WU_FadeInDelay=0 [2025-09-23 18:53:53.083] max_time_out=0 [2025-09-23 18:53:53.083] No splash screen [2025-09-23 18:53:53.083] stop dss Done [2025-09-23 18:53:53.083] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:53:53.174] /dev/mem opened. [2025-09-23 18:53:53.174] Memory mapped at address 0xffffb64de000. [2025-09-23 18:53:53.174] Read at address 0x00600018 (0xffffb64de018): 0x00000000 [2025-09-23 18:53:53.174] Write at address 0x00600018 (0xffffb64de018): 0x00400040, readback 0x00400040 [2025-09-23 18:53:53.174] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:53:53.174] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:53:53.239] Loaded PowerVR consumer services. [2025-09-23 18:53:53.405] Waiting data available... [2025-09-23 18:53:53.405] 512+0 records in [2025-09-23 18:53:53.405] 512+0 records out [2025-09-23 18:53:53.421] Starting syslogd/klogd: done [2025-09-23 18:53:53.437] DML Start [2025-09-23 18:53:53.612] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:53:53.837] DML res1: 0 [2025-09-23 18:53:54.354] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:53:54.354] Read Success [2025-09-23 18:53:54.354] Verifying certificate... [2025-09-23 18:53:54.593] Verified OK [2025-09-23 18:53:54.609] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:53:56.252] Verified OK [2025-09-23 18:53:56.252] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:53:56.859] Verified OK [2025-09-23 18:53:56.859] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:53:59.465] fs.protected_hardlinks = 1 [2025-09-23 18:53:59.481] fs.protected_symlinks = 1 [2025-09-23 18:53:59.481] kernel.modules_disabled = 1 [2025-09-23 18:53:59.673] [2025-09-23 18:53:59.673] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:54:00.933] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:54:08.670] SBL1:1210.0.1.0 [2025-09-23 18:54:08.718] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:54:10.284] SBL2:1210.0.1.0 [2025-09-23 18:54:10.332] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:54:10.444] j-A [2025-09-23 18:54:17.784] The R5 Autosar Classic is running [2025-09-23 18:54:17.809] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:54:17.809] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:54:18.417] INIT: version 2.96 booting [2025-09-23 18:54:18.529] INIT: Entering runlevel: 5 [2025-09-23 18:54:18.688] mtd28 attached [2025-09-23 18:54:18.704] mtd24 attached [2025-09-23 18:54:18.720] mtd32 attached [2025-09-23 18:54:18.752] ubi0:animations is mounted. [2025-09-23 18:54:18.809] ubi1:textures is mounted. [2025-09-23 18:54:18.809] RTNETLINK answers: File exists [2025-09-23 18:54:18.809] ubi2:dml_code is mounted. [2025-09-23 18:54:18.809] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:54:18.809] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:54:18.809] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:54:18.809] data.LB_FadeInType0=100 [2025-09-23 18:54:18.809] data.CHLH_FadeInType0=0 [2025-09-23 18:54:18.809] data.WU_FadeInDelay=0 [2025-09-23 18:54:18.809] max_time_out=0 [2025-09-23 18:54:18.809] No splash screen [2025-09-23 18:54:18.809] stop dss Done [2025-09-23 18:54:18.809] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:54:18.809] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:54:18.874] /dev/mem opened. [2025-09-23 18:54:18.874] Memory mapped at address 0xffff9a4d6000. [2025-09-23 18:54:18.874] Read at address 0x00600018 (0xffff9a4d6018): 0x00000000 [2025-09-23 18:54:18.874] Write at address 0x00600018 (0xffff9a4d6018): 0x00400040, readback 0x00400040 [2025-09-23 18:54:18.938] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:54:18.954] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:54:19.115] Loaded PowerVR consumer services. [2025-09-23 18:54:19.161] Waiting data available... [2025-09-23 18:54:19.161] 512+0 records in [2025-09-23 18:54:19.161] 512+0 records out [2025-09-23 18:54:19.193] Starting syslogd/klogd: done [2025-09-23 18:54:19.209] DML Start [2025-09-23 18:54:19.369] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:54:19.593] DML res1: 0 [2025-09-23 18:54:20.087] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:54:20.087] Read Success [2025-09-23 18:54:20.087] Verifying certificate... [2025-09-23 18:54:20.374] Verified OK [2025-09-23 18:54:20.390] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:54:22.162] Verified OK [2025-09-23 18:54:22.162] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:54:22.673] Verified OK [2025-09-23 18:54:22.673] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:54:25.121] fs.protected_hardlinks = 1 [2025-09-23 18:54:25.152] fs.protected_symlinks = 1 [2025-09-23 18:54:25.152] kernel.modules_disabled = 1 [2025-09-23 18:54:25.343] [2025-09-23 18:54:25.343] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:54:26.707] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:54:34.399] SBL1:1210.0.1.0 [2025-09-23 18:54:34.447] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:54:36.014] SBL2:1210.0.1.0 [2025-09-23 18:54:36.062] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:54:36.158] j-A [2025-09-23 18:54:43.513] The R5 Autosar Classic is running [2025-09-23 18:54:43.534] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:54:43.534] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:54:44.142] INIT: version 2.96 booting [2025-09-23 18:54:44.254] INIT: Entering runlevel: 5 [2025-09-23 18:54:44.414] mtd28 attached [2025-09-23 18:54:44.430] mtd32 attached [2025-09-23 18:54:44.430] mtd24 attached [2025-09-23 18:54:44.478] RTNETLINK answers: File exists [2025-09-23 18:54:44.478] ubi0:animations is mounted. [2025-09-23 18:54:44.521] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:54:44.521] ubi2:textures is mounted. [2025-09-23 18:54:44.521] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:54:44.521] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:54:44.521] ubi1:dml_code is mounted. [2025-09-23 18:54:44.521] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:54:44.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:54:44.542] data.LB_FadeInType0=100 [2025-09-23 18:54:44.542] data.CHLH_FadeInType0=0 [2025-09-23 18:54:44.542] data.WU_FadeInDelay=0 [2025-09-23 18:54:44.542] max_time_out=0 [2025-09-23 18:54:44.542] No splash screen [2025-09-23 18:54:44.542] stop dss Done [2025-09-23 18:54:44.624] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:54:44.624] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:54:44.624] /dev/mem opened. [2025-09-23 18:54:44.624] Memory mapped at address 0xffff9254e000. [2025-09-23 18:54:44.624] Read at address 0x00600018 (0xffff9254e018): 0x00000000 [2025-09-23 18:54:44.624] Write at address 0x00600018 (0xffff9254e018): 0x00400040, readback 0x00400040 [2025-09-23 18:54:44.705] Loaded PowerVR consumer services. [2025-09-23 18:54:44.876] Waiting data available... [2025-09-23 18:54:44.876] 512+0 records in [2025-09-23 18:54:44.876] 512+0 records out [2025-09-23 18:54:44.892] Starting syslogd/klogd: done [2025-09-23 18:54:44.908] DML Start [2025-09-23 18:54:45.100] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:54:45.293] DML res1: 0 [2025-09-23 18:54:45.771] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:54:45.771] Read Success [2025-09-23 18:54:45.771] Verifying certificate... [2025-09-23 18:54:46.011] Verified OK [2025-09-23 18:54:46.027] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:54:47.733] Verified OK [2025-09-23 18:54:47.733] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:54:48.380] Verified OK [2025-09-23 18:54:48.380] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:54:50.907] fs.protected_hardlinks = 1 [2025-09-23 18:54:50.907] fs.protected_symlinks = 1 [2025-09-23 18:54:50.923] kernel.modules_disabled = 1 [2025-09-23 18:54:51.115] [2025-09-23 18:54:51.115] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:54:52.388] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:55:00.117] SBL1:1210.0.1.0 [2025-09-23 18:55:00.149] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:55:01.731] SBL2:1210.0.1.0 [2025-09-23 18:55:01.763] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:55:01.875] j-A [2025-09-23 18:55:09.248] The R5 Autosar Classic is running [2025-09-23 18:55:09.248] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:55:09.248] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:55:09.855] INIT: version 2.96 booting [2025-09-23 18:55:09.967] INIT: Entering runlevel: 5 [2025-09-23 18:55:10.111] mtd24 attached [2025-09-23 18:55:10.127] mtd28 attached [2025-09-23 18:55:10.143] mtd32 attached [2025-09-23 18:55:10.191] RTNETLINK answers: File exists [2025-09-23 18:55:10.191] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:55:10.226] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:55:10.226] ubi0:textures is mounted. [2025-09-23 18:55:10.226] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:55:10.226] ubi2:dml_code is mounted. [2025-09-23 18:55:10.226] ubi1:animations is mounted. [2025-09-23 18:55:10.226] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:55:10.226] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:55:10.251] data.LB_FadeInType0=100 [2025-09-23 18:55:10.251] data.CHLH_FadeInType0=0 [2025-09-23 18:55:10.251] data.WU_FadeInDelay=0 [2025-09-23 18:55:10.251] max_time_out=0 [2025-09-23 18:55:10.251] No splash screen [2025-09-23 18:55:10.251] stop dss Done [2025-09-23 18:55:10.283] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:55:10.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:55:10.335] /dev/mem opened. [2025-09-23 18:55:10.335] Memory mapped at address 0xffffad6e8000. [2025-09-23 18:55:10.335] Read at address 0x00600018 (0xffffad6e8018): 0x00000000 [2025-09-23 18:55:10.335] Write at address 0x00600018 (0xffffad6e8018): 0x00400040, readback 0x00400040 [2025-09-23 18:55:10.447] Loaded PowerVR consumer services. [2025-09-23 18:55:10.585] 512+0 records in [2025-09-23 18:55:10.585] 512+0 records out [2025-09-23 18:55:10.585] Waiting data available... [2025-09-23 18:55:10.616] Starting syslogd/klogd: done [2025-09-23 18:55:10.633] DML Start [2025-09-23 18:55:10.809] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:55:11.065] DML res1: 0 [2025-09-23 18:55:11.489] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:55:11.489] Read Success [2025-09-23 18:55:11.489] Verifying certificate... [2025-09-23 18:55:11.729] Verified OK [2025-09-23 18:55:11.761] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:55:13.392] Verified OK [2025-09-23 18:55:13.392] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:55:14.024] Verified OK [2025-09-23 18:55:14.024] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:55:16.535] fs.protected_hardlinks = 1 [2025-09-23 18:55:16.535] fs.protected_symlinks = 1 [2025-09-23 18:55:16.550] kernel.modules_disabled = 1 [2025-09-23 18:55:16.742] [2025-09-23 18:55:16.742] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:55:18.143] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:55:25.863] SBL1:1210.0.1.0 [2025-09-23 18:55:25.911] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:55:27.477] SBL2:1210.0.1.0 [2025-09-23 18:55:27.509] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:55:27.621] j-A [2025-09-23 18:55:34.996] The R5 Autosar Classic is running [2025-09-23 18:55:34.996] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:55:34.996] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:55:35.603] INIT: version 2.96 booting [2025-09-23 18:55:35.716] INIT: Entering runlevel: 5 [2025-09-23 18:55:35.875] mtd24 attached [2025-09-23 18:55:35.875] mtd32 attached [2025-09-23 18:55:35.891] mtd28 attached [2025-09-23 18:55:35.939] RTNETLINK answers: File exists [2025-09-23 18:55:35.939] ubi0:textures is mounted. [2025-09-23 18:55:35.999] ubi1:dml_code is mounted. [2025-09-23 18:55:35.999] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:55:35.999] ubi2:animations is mounted. [2025-09-23 18:55:35.999] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:55:35.999] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:55:35.999] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:55:35.999] data.LB_FadeInType0=100 [2025-09-23 18:55:35.999] data.CHLH_FadeInType0=0 [2025-09-23 18:55:35.999] data.WU_FadeInDelay=0 [2025-09-23 18:55:35.999] max_time_out=0 [2025-09-23 18:55:35.999] No splash screen [2025-09-23 18:55:35.999] stop dss Done [2025-09-23 18:55:35.999] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:55:36.047] /dev/mem opened. [2025-09-23 18:55:36.047] Memory mapped at address 0xffff8785d000. [2025-09-23 18:55:36.086] Read at address 0x00600018 (0xffff8785d018): 0x00000000 [2025-09-23 18:55:36.086] Write at address 0x00600018 (0xffff8785d018): 0x00400040, readback 0x00400040 [2025-09-23 18:55:36.086] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:55:36.086] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:55:36.197] Loaded PowerVR consumer services. [2025-09-23 18:55:36.337] Waiting data available... [2025-09-23 18:55:36.337] 512+0 records in [2025-09-23 18:55:36.337] 512+0 records out [2025-09-23 18:55:36.353] Starting syslogd/klogd: done [2025-09-23 18:55:36.368] DML Start [2025-09-23 18:55:36.529] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:55:36.753] DML res1: 0 [2025-09-23 18:55:37.222] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:55:37.222] Read Success [2025-09-23 18:55:37.222] Verifying certificate... [2025-09-23 18:55:37.463] Verified OK [2025-09-23 18:55:37.479] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:55:39.182] Verified OK [2025-09-23 18:55:39.182] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:55:39.805] Verified OK [2025-09-23 18:55:39.805] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:55:42.444] fs.protected_hardlinks = 1 [2025-09-23 18:55:42.444] fs.protected_symlinks = 1 [2025-09-23 18:55:42.460] kernel.modules_disabled = 1 [2025-09-23 18:55:42.651] [2025-09-23 18:55:42.651] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:55:43.861] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:55:51.572] SBL1:1210.0.1.0 [2025-09-23 18:55:51.620] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:55:53.187] SBL2:1210.0.1.0 [2025-09-23 18:55:53.235] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:55:53.330] j-A [2025-09-23 18:56:00.685] The R5 Autosar Classic is running [2025-09-23 18:56:00.708] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:56:00.708] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:56:01.316] INIT: version 2.96 booting [2025-09-23 18:56:01.428] INIT: Entering runlevel: 5 [2025-09-23 18:56:01.572] mtd28 attached [2025-09-23 18:56:01.588] mtd24 attached [2025-09-23 18:56:01.604] mtd32 attached [2025-09-23 18:56:01.635] ubi0:animations is mounted. [2025-09-23 18:56:01.651] RTNETLINK answers: File exists [2025-09-23 18:56:01.651] ubi1:textures is mounted. [2025-09-23 18:56:01.681] ubi2:dml_code is mounted. [2025-09-23 18:56:01.681] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:56:01.681] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:56:01.717] data.LB_FadeInType0=100 [2025-09-23 18:56:01.717] data.CHLH_FadeInType0=0 [2025-09-23 18:56:01.717] data.WU_FadeInDelay=0 [2025-09-23 18:56:01.717] max_time_out=0 [2025-09-23 18:56:01.717] No splash screen [2025-09-23 18:56:01.717] stop dss Done [2025-09-23 18:56:01.717] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:56:01.717] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:56:01.717] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:56:01.749] /dev/mem opened. [2025-09-23 18:56:01.749] Memory mapped at address 0xffffa67d5000. [2025-09-23 18:56:01.775] Read at address 0x00600018 (0xffffa67d5018): 0x00000000 [2025-09-23 18:56:01.775] Write at address 0x00600018 (0xffffa67d5018): 0x00400040, readback 0x00400040 [2025-09-23 18:56:01.887] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:56:01.887] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:56:01.951] Loaded PowerVR consumer services. [2025-09-23 18:56:02.046] Waiting data available... [2025-09-23 18:56:02.062] 512+0 records in [2025-09-23 18:56:02.062] 512+0 records out [2025-09-23 18:56:02.110] Starting syslogd/klogd: done [2025-09-23 18:56:02.126] DML Start [2025-09-23 18:56:02.318] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:56:02.542] DML res1: 0 [2025-09-23 18:56:03.016] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:56:03.016] Read Success [2025-09-23 18:56:03.016] Verifying certificate... [2025-09-23 18:56:03.271] Verified OK [2025-09-23 18:56:03.319] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:56:04.982] Verified OK [2025-09-23 18:56:04.982] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:56:05.557] Verified OK [2025-09-23 18:56:05.557] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:56:08.148] fs.protected_hardlinks = 1 [2025-09-23 18:56:08.148] fs.protected_symlinks = 1 [2025-09-23 18:56:08.164] kernel.modules_disabled = 1 [2025-09-23 18:56:08.356] [2025-09-23 18:56:08.356] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:56:09.658] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:56:17.294] SBL1:1210.0.1.0 [2025-09-23 18:56:17.342] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:56:18.909] SBL2:1210.0.1.0 [2025-09-23 18:56:18.957] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:56:19.053] j-A [2025-09-23 18:56:26.408] The R5 Autosar Classic is running [2025-09-23 18:56:26.430] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:56:26.430] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:56:27.037] INIT: version 2.96 booting [2025-09-23 18:56:27.149] INIT: Entering runlevel: 5 [2025-09-23 18:56:27.309] mtd24 attached [2025-09-23 18:56:27.325] mtd28 attached [2025-09-23 18:56:27.341] mtd32 attached [2025-09-23 18:56:27.374] ubi0:textures is mounted. [2025-09-23 18:56:27.389] RTNETLINK answers: File exists [2025-09-23 18:56:27.389] ubi1:animations is mounted. [2025-09-23 18:56:27.449] ubi2:dml_code is mounted. [2025-09-23 18:56:27.449] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:56:27.449] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:56:27.449] data.LB_FadeInType0=100 [2025-09-23 18:56:27.449] data.CHLH_FadeInType0=0 [2025-09-23 18:56:27.449] data.WU_FadeInDelay=0 [2025-09-23 18:56:27.449] max_time_out=0 [2025-09-23 18:56:27.449] No splash screen [2025-09-23 18:56:27.449] stop dss Done [2025-09-23 18:56:27.449] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:56:27.449] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:56:27.449] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:56:27.481] /dev/mem opened. [2025-09-23 18:56:27.481] Memory mapped at address 0xffff8a141000. [2025-09-23 18:56:27.507] Read at address 0x00600018 (0xffff8a141018): 0x00000000 [2025-09-23 18:56:27.507] Write at address 0x00600018 (0xffff8a141018): 0x00400040, readback 0x00400040 [2025-09-23 18:56:27.539] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:56:27.539] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:56:27.619] Loaded PowerVR consumer services. [2025-09-23 18:56:27.771] 512+0 records in [2025-09-23 18:56:27.771] 512+0 records out [2025-09-23 18:56:27.771] Waiting data available... [2025-09-23 18:56:27.802] Starting syslogd/klogd: done [2025-09-23 18:56:27.818] DML Start [2025-09-23 18:56:27.979] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:56:28.186] DML res1: 0 [2025-09-23 18:56:28.666] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:56:28.682] Read Success [2025-09-23 18:56:28.682] Verifying certificate... [2025-09-23 18:56:28.938] Verified OK [2025-09-23 18:56:28.938] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:56:30.537] Verified OK [2025-09-23 18:56:30.553] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:56:31.203] Verified OK [2025-09-23 18:56:31.203] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:56:33.874] fs.protected_hardlinks = 1 [2025-09-23 18:56:33.874] fs.protected_symlinks = 1 [2025-09-23 18:56:33.889] kernel.modules_disabled = 1 [2025-09-23 18:56:34.065] [2025-09-23 18:56:34.065] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:56:35.322] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:56:42.995] SBL1:1210.0.1.0 [2025-09-23 18:56:43.027] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:56:44.610] SBL2:1210.0.1.0 [2025-09-23 18:56:44.642] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:56:44.754] j-A [2025-09-23 18:56:52.094] The R5 Autosar Classic is running [2025-09-23 18:56:52.117] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:56:52.117] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:56:52.725] INIT: version 2.96 booting [2025-09-23 18:56:52.837] INIT: Entering runlevel: 5 [2025-09-23 18:56:52.997] mtd28 attached [2025-09-23 18:56:52.997] mtd24 attached [2025-09-23 18:56:53.013] mtd32 attached [2025-09-23 18:56:53.101] RTNETLINK answers: File exists [2025-09-23 18:56:53.101] ubi0:animations is mounted. [2025-09-23 18:56:53.101] ubi1:textures is mounted. [2025-09-23 18:56:53.101] ubi2:dml_code is mounted. [2025-09-23 18:56:53.101] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:56:53.101] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:56:53.101] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:56:53.101] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:56:53.133] data.LB_FadeInType0=100 [2025-09-23 18:56:53.133] data.CHLH_FadeInType0=0 [2025-09-23 18:56:53.133] data.WU_FadeInDelay=0 [2025-09-23 18:56:53.133] max_time_out=0 [2025-09-23 18:56:53.133] No splash screen [2025-09-23 18:56:53.133] stop dss Done [2025-09-23 18:56:53.133] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:56:53.191] /dev/mem opened. [2025-09-23 18:56:53.191] Memory mapped at address 0xffffb4638000. [2025-09-23 18:56:53.191] Read at address 0x00600018 (0xffffb4638018): 0x00000000 [2025-09-23 18:56:53.191] Write at address 0x00600018 (0xffffb4638018): 0x00400040, readback 0x00400040 [2025-09-23 18:56:53.207] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:56:53.232] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:56:53.375] Loaded PowerVR consumer services. [2025-09-23 18:56:53.455] Waiting data available... [2025-09-23 18:56:53.471] 512+0 records in [2025-09-23 18:56:53.471] 512+0 records out [2025-09-23 18:56:53.519] Starting syslogd/klogd: done [2025-09-23 18:56:53.536] DML Start [2025-09-23 18:56:53.695] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:56:53.888] DML res1: 0 [2025-09-23 18:56:54.446] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:56:54.446] Read Success [2025-09-23 18:56:54.446] Verifying certificate... [2025-09-23 18:56:54.717] Verified OK [2025-09-23 18:56:54.733] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:56:56.325] Verified OK [2025-09-23 18:56:56.325] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:56:56.971] Verified OK [2025-09-23 18:56:56.971] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:56:59.657] fs.protected_hardlinks = 1 [2025-09-23 18:56:59.657] fs.protected_symlinks = 1 [2025-09-23 18:56:59.672] kernel.modules_disabled = 1 [2025-09-23 18:56:59.865] [2025-09-23 18:56:59.865] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:57:01.051] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:57:08.721] SBL1:1210.0.1.0 [2025-09-23 18:57:08.769] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:57:10.336] SBL2:1210.0.1.0 [2025-09-23 18:57:10.384] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:57:10.479] j-A [2025-09-23 18:57:17.835] The R5 Autosar Classic is running [2025-09-23 18:57:17.860] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:57:17.860] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:57:18.468] INIT: version 2.96 booting [2025-09-23 18:57:18.580] INIT: Entering runlevel: 5 [2025-09-23 18:57:18.739] mtd24 attached [2025-09-23 18:57:18.755] mtd28 attached [2025-09-23 18:57:18.772] mtd32 attached [2025-09-23 18:57:18.853] RTNETLINK answers: File exists [2025-09-23 18:57:18.853] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:57:18.853] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:57:18.853] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:57:18.853] ubi0:textures is mounted. [2025-09-23 18:57:18.853] ubi1:animations is mounted. [2025-09-23 18:57:18.853] ubi2:dml_code is mounted. [2025-09-23 18:57:18.853] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:57:18.853] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:57:18.879] data.LB_FadeInType0=100 [2025-09-23 18:57:18.879] data.CHLH_FadeInType0=0 [2025-09-23 18:57:18.879] data.WU_FadeInDelay=0 [2025-09-23 18:57:18.879] max_time_out=0 [2025-09-23 18:57:18.879] No splash screen [2025-09-23 18:57:18.879] stop dss Done [2025-09-23 18:57:18.895] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:57:18.911] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:57:18.927] /dev/mem opened. [2025-09-23 18:57:18.927] Memory mapped at address 0xffffb3aff000. [2025-09-23 18:57:18.953] Read at address 0x00600018 (0xffffb3aff018): 0x00000000 [2025-09-23 18:57:18.953] Write at address 0x00600018 (0xffffb3aff018): 0x00400040, readback 0x00400040 [2025-09-23 18:57:19.161] Loaded PowerVR consumer services. [2025-09-23 18:57:19.192] Waiting data available... [2025-09-23 18:57:19.208] 512+0 records in [2025-09-23 18:57:19.208] 512+0 records out [2025-09-23 18:57:19.240] Starting syslogd/klogd: done [2025-09-23 18:57:19.256] DML Start [2025-09-23 18:57:19.432] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:57:19.624] DML res1: 0 [2025-09-23 18:57:20.088] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:57:20.109] Read Success [2025-09-23 18:57:20.109] Verifying certificate... [2025-09-23 18:57:20.364] Verified OK [2025-09-23 18:57:20.380] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:57:22.145] Verified OK [2025-09-23 18:57:22.145] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:57:22.798] Verified OK [2025-09-23 18:57:22.798] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:57:25.387] fs.protected_hardlinks = 1 [2025-09-23 18:57:25.387] fs.protected_symlinks = 1 [2025-09-23 18:57:25.387] kernel.modules_disabled = 1 [2025-09-23 18:57:25.579] [2025-09-23 18:57:25.579] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:57:26.677] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:57:34.443] SBL1:1210.0.1.0 [2025-09-23 18:57:34.491] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:57:36.058] SBL2:1210.0.1.0 [2025-09-23 18:57:36.089] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:57:36.201] j-A [2025-09-23 18:57:43.578] The R5 Autosar Classic is running [2025-09-23 18:57:43.578] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:57:43.578] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:57:44.185] INIT: version 2.96 booting [2025-09-23 18:57:44.297] INIT: Entering runlevel: 5 [2025-09-23 18:57:44.457] mtd24 attached [2025-09-23 18:57:44.473] mtd32 attached [2025-09-23 18:57:44.473] mtd28 attached [2025-09-23 18:57:44.588] RTNETLINK answers: File exists [2025-09-23 18:57:44.588] ubi0:textures is mounted. [2025-09-23 18:57:44.588] ubi1:dml_code is mounted. [2025-09-23 18:57:44.588] ubi2:animations is mounted. [2025-09-23 18:57:44.588] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:57:44.588] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:57:44.588] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:57:44.588] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:57:44.588] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:57:44.588] data.LB_FadeInType0=100 [2025-09-23 18:57:44.588] data.CHLH_FadeInType0=0 [2025-09-23 18:57:44.588] data.WU_FadeInDelay=0 [2025-09-23 18:57:44.588] max_time_out=0 [2025-09-23 18:57:44.588] No splash screen [2025-09-23 18:57:44.588] stop dss Done [2025-09-23 18:57:44.666] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:57:44.666] /dev/mem opened. [2025-09-23 18:57:44.666] Memory mapped at address 0xffff8a03d000. [2025-09-23 18:57:44.666] Read at address 0x00600018 (0xffff8a03d018): 0x00000000 [2025-09-23 18:57:44.666] Write at address 0x00600018 (0xffff8a03d018): 0x00400040, readback 0x00400040 [2025-09-23 18:57:44.666] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:57:44.761] Loaded PowerVR consumer services. [2025-09-23 18:57:44.890] 512+0 records in [2025-09-23 18:57:44.906] 512+0 records out [2025-09-23 18:57:44.906] Waiting data available... [2025-09-23 18:57:44.953] Starting syslogd/klogd: done [2025-09-23 18:57:44.969] DML Start [2025-09-23 18:57:45.146] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:57:45.369] DML res1: 0 [2025-09-23 18:57:45.813] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:57:45.813] Read Success [2025-09-23 18:57:45.813] Verifying certificate... [2025-09-23 18:57:46.020] Verified OK [2025-09-23 18:57:46.036] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:57:47.633] Verified OK [2025-09-23 18:57:47.633] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:57:48.301] Verified OK [2025-09-23 18:57:48.301] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:57:50.922] fs.protected_hardlinks = 1 [2025-09-23 18:57:50.953] fs.protected_symlinks = 1 [2025-09-23 18:57:50.953] kernel.modules_disabled = 1 [2025-09-23 18:57:51.145] [2025-09-23 18:57:51.145] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:57:52.479] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:58:00.152] SBL1:1210.0.1.0 [2025-09-23 18:58:00.200] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:58:01.766] SBL2:1210.0.1.0 [2025-09-23 18:58:01.798] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:58:01.911] j-A [2025-09-23 18:58:09.288] The R5 Autosar Classic is running [2025-09-23 18:58:09.288] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:58:09.288] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:58:09.895] INIT: version 2.96 booting [2025-09-23 18:58:10.007] INIT: Entering runlevel: 5 [2025-09-23 18:58:10.151] mtd28 attached [2025-09-23 18:58:10.167] mtd24 attached [2025-09-23 18:58:10.183] mtd32 attached [2025-09-23 18:58:10.215] ubi0:animations is mounted. [2025-09-23 18:58:10.231] RTNETLINK answers: File exists [2025-09-23 18:58:10.231] ubi1:textures is mounted. [2025-09-23 18:58:10.264] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:58:10.264] ubi2:dml_code is mounted. [2025-09-23 18:58:10.264] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:58:10.264] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:58:10.264] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:58:10.296] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:58:10.296] data.LB_FadeInType0=100 [2025-09-23 18:58:10.296] data.CHLH_FadeInType0=0 [2025-09-23 18:58:10.296] data.WU_FadeInDelay=0 [2025-09-23 18:58:10.296] max_time_out=0 [2025-09-23 18:58:10.296] No splash screen [2025-09-23 18:58:10.296] stop dss Done [2025-09-23 18:58:10.312] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:58:10.328] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:58:10.344] /dev/mem opened. [2025-09-23 18:58:10.344] Memory mapped at address 0xffff9a9d7000. [2025-09-23 18:58:10.370] Read at address 0x00600018 (0xffff9a9d7018): 0x00000000 [2025-09-23 18:58:10.370] Write at address 0x00600018 (0xffff9a9d7018): 0x00400040, readback 0x00400040 [2025-09-23 18:58:10.578] Loaded PowerVR consumer services. [2025-09-23 18:58:10.626] 512+0 records in [2025-09-23 18:58:10.626] 512+0 records out [2025-09-23 18:58:10.642] Waiting data available... [2025-09-23 18:58:10.674] Starting syslogd/klogd: done [2025-09-23 18:58:10.690] DML Start [2025-09-23 18:58:10.881] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:58:11.105] DML res1: 0 [2025-09-23 18:58:11.521] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:58:11.521] Read Success [2025-09-23 18:58:11.521] Verifying certificate... [2025-09-23 18:58:11.761] Verified OK [2025-09-23 18:58:11.777] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:58:13.534] Verified OK [2025-09-23 18:58:13.534] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:58:14.161] Verified OK [2025-09-23 18:58:14.161] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:58:16.734] fs.protected_hardlinks = 1 [2025-09-23 18:58:16.734] fs.protected_symlinks = 1 [2025-09-23 18:58:16.734] kernel.modules_disabled = 1 [2025-09-23 18:58:16.925] [2025-09-23 18:58:16.925] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:58:18.195] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:58:25.902] SBL1:1210.0.1.0 [2025-09-23 18:58:25.934] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:58:27.516] SBL2:1210.0.1.0 [2025-09-23 18:58:27.548] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:58:27.660] j-A [2025-09-23 18:58:34.999] The R5 Autosar Classic is running [2025-09-23 18:58:35.024] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:58:35.024] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:58:35.633] INIT: version 2.96 booting [2025-09-23 18:58:35.744] INIT: Entering runlevel: 5 [2025-09-23 18:58:35.905] mtd28 attached [2025-09-23 18:58:35.905] mtd24 attached [2025-09-23 18:58:35.921] mtd32 attached [2025-09-23 18:58:35.968] RTNETLINK answers: File exists [2025-09-23 18:58:35.968] ubi0:animations is mounted. [2025-09-23 18:58:36.032] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:58:36.032] ubi1:textures is mounted. [2025-09-23 18:58:36.032] ubi2:dml_code is mounted. [2025-09-23 18:58:36.032] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:58:36.032] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:58:36.032] data.LB_FadeInType0=100 [2025-09-23 18:58:36.032] data.CHLH_FadeInType0=0 [2025-09-23 18:58:36.032] data.WU_FadeInDelay=0 [2025-09-23 18:58:36.032] max_time_out=0 [2025-09-23 18:58:36.032] No splash screen [2025-09-23 18:58:36.032] stop dss Done [2025-09-23 18:58:36.032] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:58:36.032] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:58:36.064] /dev/mem opened. [2025-09-23 18:58:36.064] Memory mapped at address 0xffff929cf000. [2025-09-23 18:58:36.090] Read at address 0x00600018 (0xffff929cf018): 0x00000000 [2025-09-23 18:58:36.090] Write at address 0x00600018 (0xffff929cf018): 0x00400040, readback 0x00400040 [2025-09-23 18:58:36.090] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:58:36.106] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:58:36.234] Loaded PowerVR consumer services. [2025-09-23 18:58:36.362] Waiting data available... [2025-09-23 18:58:36.377] 512+0 records in [2025-09-23 18:58:36.377] 512+0 records out [2025-09-23 18:58:36.409] Starting syslogd/klogd: done [2025-09-23 18:58:36.425] DML Start [2025-09-23 18:58:36.618] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:58:36.842] DML res1: 0 [2025-09-23 18:58:37.257] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:58:37.257] Read Success [2025-09-23 18:58:37.257] Verifying certificate... [2025-09-23 18:58:37.528] Verified OK [2025-09-23 18:58:37.545] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:58:39.105] Verified OK [2025-09-23 18:58:39.105] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:58:39.664] Verified OK [2025-09-23 18:58:39.664] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:58:42.367] fs.protected_hardlinks = 1 [2025-09-23 18:58:42.383] fs.protected_symlinks = 1 [2025-09-23 18:58:42.383] kernel.modules_disabled = 1 [2025-09-23 18:58:42.558] [2025-09-23 18:58:42.558] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:58:43.881] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:58:51.612] SBL1:1210.0.1.0 [2025-09-23 18:58:51.644] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:58:53.227] SBL2:1210.0.1.0 [2025-09-23 18:58:53.259] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:58:53.371] j-A [2025-09-23 18:59:00.744] The R5 Autosar Classic is running [2025-09-23 18:59:00.744] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:59:00.744] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:59:01.352] INIT: version 2.96 booting [2025-09-23 18:59:01.463] INIT: Entering runlevel: 5 [2025-09-23 18:59:01.607] mtd24 attached [2025-09-23 18:59:01.622] mtd28 attached [2025-09-23 18:59:01.638] mtd32 attached [2025-09-23 18:59:01.670] ubi0:textures is mounted. [2025-09-23 18:59:01.687] RTNETLINK answers: File exists [2025-09-23 18:59:01.687] ubi1:animations is mounted. [2025-09-23 18:59:01.741] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:59:01.741] ubi2:dml_code is mounted. [2025-09-23 18:59:01.741] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:59:01.741] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:59:01.741] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:59:01.741] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:59:01.741] data.LB_FadeInType0=100 [2025-09-23 18:59:01.741] data.CHLH_FadeInType0=0 [2025-09-23 18:59:01.741] data.WU_FadeInDelay=0 [2025-09-23 18:59:01.741] max_time_out=0 [2025-09-23 18:59:01.741] No splash screen [2025-09-23 18:59:01.741] stop dss Done [2025-09-23 18:59:01.822] /dev/mem opened. [2025-09-23 18:59:01.822] Memory mapped at address 0xffffa2429000. [2025-09-23 18:59:01.822] Read at address 0x00600018 (0xffffa2429018): 0x00000000 [2025-09-23 18:59:01.822] Write at address 0x00600018 (0xffffa2429018): 0x00400040, readback 0x00400040 [2025-09-23 18:59:01.822] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:59:01.822] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:59:01.950] Loaded PowerVR consumer services. [2025-09-23 18:59:02.062] Waiting data available... [2025-09-23 18:59:02.077] 512+0 records in [2025-09-23 18:59:02.077] 512+0 records out [2025-09-23 18:59:02.125] Starting syslogd/klogd: done [2025-09-23 18:59:02.141] DML Start [2025-09-23 18:59:02.334] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:59:02.541] DML res1: 0 [2025-09-23 18:59:02.942] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:59:02.957] Read Success [2025-09-23 18:59:02.957] Verifying certificate... [2025-09-23 18:59:03.181] Verified OK [2025-09-23 18:59:03.213] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:59:04.860] Verified OK [2025-09-23 18:59:04.860] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:59:05.541] Verified OK [2025-09-23 18:59:05.541] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:59:08.227] fs.protected_hardlinks = 1 [2025-09-23 18:59:08.227] fs.protected_symlinks = 1 [2025-09-23 18:59:08.244] kernel.modules_disabled = 1 [2025-09-23 18:59:08.435] [2025-09-23 18:59:08.435] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:59:09.603] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:59:17.327] SBL1:1210.0.1.0 [2025-09-23 18:59:17.375] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:59:18.941] SBL2:1210.0.1.0 [2025-09-23 18:59:18.989] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 18:59:19.085] j-A [2025-09-23 18:59:26.441] The R5 Autosar Classic is running [2025-09-23 18:59:26.441] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:59:26.462] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:59:27.069] INIT: version 2.96 booting [2025-09-23 18:59:27.180] INIT: Entering runlevel: 5 [2025-09-23 18:59:27.340] mtd24 attached [2025-09-23 18:59:27.340] mtd28 attached [2025-09-23 18:59:27.356] mtd32 attached [2025-09-23 18:59:27.404] RTNETLINK answers: File exists [2025-09-23 18:59:27.444] ubi0:textures is mounted. [2025-09-23 18:59:27.444] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:59:27.444] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:59:27.444] ubi1:animations is mounted. [2025-09-23 18:59:27.444] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:59:27.444] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:59:27.444] ubi2:dml_code is mounted. [2025-09-23 18:59:27.444] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:59:27.460] data.LB_FadeInType0=100 [2025-09-23 18:59:27.460] data.CHLH_FadeInType0=0 [2025-09-23 18:59:27.460] data.WU_FadeInDelay=0 [2025-09-23 18:59:27.481] max_time_out=0 [2025-09-23 18:59:27.481] No splash screen [2025-09-23 18:59:27.481] stop dss Done [2025-09-23 18:59:27.509] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:59:27.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:59:27.525] /dev/mem opened. [2025-09-23 18:59:27.557] Memory mapped at address 0xffffaed27000. [2025-09-23 18:59:27.557] Read at address 0x00600018 (0xffffaed27018): 0x00000000 [2025-09-23 18:59:27.557] Write at address 0x00600018 (0xffffaed27018): 0x00400040, readback 0x00400040 [2025-09-23 18:59:27.621] Loaded PowerVR consumer services. [2025-09-23 18:59:27.805] 512+0 records in [2025-09-23 18:59:27.805] 512+0 records out [2025-09-23 18:59:27.805] Waiting data available... [2025-09-23 18:59:27.821] Starting syslogd/klogd: done [2025-09-23 18:59:27.837] DML Start [2025-09-23 18:59:28.013] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:59:28.236] DML res1: 0 [2025-09-23 18:59:28.730] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:59:28.730] Read Success [2025-09-23 18:59:28.730] Verifying certificate... [2025-09-23 18:59:28.971] Verified OK [2025-09-23 18:59:28.987] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:59:30.596] Verified OK [2025-09-23 18:59:30.596] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:59:31.267] Verified OK [2025-09-23 18:59:31.267] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:59:33.953] fs.protected_hardlinks = 1 [2025-09-23 18:59:33.969] fs.protected_symlinks = 1 [2025-09-23 18:59:33.969] kernel.modules_disabled = 1 [2025-09-23 18:59:34.145] [2025-09-23 18:59:34.145] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 18:59:35.348] RTNETLINK answers: Cannot assign requested address [2025-09-23 18:59:43.058] SBL1:1210.0.1.0 [2025-09-23 18:59:43.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:59:44.673] SBL2:1210.0.1.0 [2025-09-23 18:59:44.705] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 18:59:44.817] j-A [2025-09-23 18:59:52.187] The R5 Autosar Classic is running [2025-09-23 18:59:52.187] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 18:59:52.187] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 18:59:52.796] INIT: version 2.96 booting [2025-09-23 18:59:52.907] INIT: Entering runlevel: 5 [2025-09-23 18:59:53.066] mtd28 attached [2025-09-23 18:59:53.066] mtd24 attached [2025-09-23 18:59:53.083] mtd32 attached [2025-09-23 18:59:53.169] ubi0:animations is mounted. [2025-09-23 18:59:53.169] RTNETLINK answers: File exists [2025-09-23 18:59:53.169] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 18:59:53.169] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 18:59:53.169] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 18:59:53.169] ubi2:dml_code is mounted. [2025-09-23 18:59:53.169] ubi1:textures is mounted. [2025-09-23 18:59:53.169] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 18:59:53.169] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 18:59:53.185] data.LB_FadeInType0=100 [2025-09-23 18:59:53.206] data.CHLH_FadeInType0=0 [2025-09-23 18:59:53.206] data.WU_FadeInDelay=0 [2025-09-23 18:59:53.206] max_time_out=0 [2025-09-23 18:59:53.206] No splash screen [2025-09-23 18:59:53.206] stop dss Done [2025-09-23 18:59:53.238] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 18:59:53.254] /dev/mem opened. [2025-09-23 18:59:53.254] Memory mapped at address 0xffff86f49000. [2025-09-23 18:59:53.286] Read at address 0x00600018 (0xffff86f49018): 0x00000000 [2025-09-23 18:59:53.286] Write at address 0x00600018 (0xffff86f49018): 0x00400040, readback 0x00400040 [2025-09-23 18:59:53.286] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 18:59:53.381] Loaded PowerVR consumer services. [2025-09-23 18:59:53.525] 512+0 records in [2025-09-23 18:59:53.525] 512+0 records out [2025-09-23 18:59:53.525] Waiting data available... [2025-09-23 18:59:53.541] Starting syslogd/klogd: done [2025-09-23 18:59:53.557] DML Start [2025-09-23 18:59:53.733] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 18:59:53.957] DML res1: 0 [2025-09-23 18:59:54.460] Read DML Algo certificate (mtd31) and save to file [2025-09-23 18:59:54.460] Read Success [2025-09-23 18:59:54.460] Verifying certificate... [2025-09-23 18:59:54.732] Verified OK [2025-09-23 18:59:54.747] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 18:59:56.312] Verified OK [2025-09-23 18:59:56.312] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 18:59:56.999] Verified OK [2025-09-23 18:59:56.999] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 18:59:59.621] fs.protected_hardlinks = 1 [2025-09-23 18:59:59.621] fs.protected_symlinks = 1 [2025-09-23 18:59:59.637] kernel.modules_disabled = 1 [2025-09-23 18:59:59.829] [2025-09-23 18:59:59.829] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:00:01.039] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:00:08.782] SBL1:1210.0.1.0 [2025-09-23 19:00:08.814] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:00:10.397] SBL2:1210.0.1.0 [2025-09-23 19:00:10.429] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:00:10.541] j-A [2025-09-23 19:00:17.910] The R5 Autosar Classic is running [2025-09-23 19:00:17.910] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:00:17.910] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:00:18.518] INIT: version 2.96 booting [2025-09-23 19:00:18.629] INIT: Entering runlevel: 5 [2025-09-23 19:00:18.789] mtd24 attached [2025-09-23 19:00:18.805] mtd28 attached [2025-09-23 19:00:18.821] mtd32 attached [2025-09-23 19:00:18.853] ubi0:textures is mounted. [2025-09-23 19:00:18.869] RTNETLINK answers: File exists [2025-09-23 19:00:18.905] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:00:18.905] ubi1:animations is mounted. [2025-09-23 19:00:18.905] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:00:18.905] ubi2:dml_code is mounted. [2025-09-23 19:00:18.905] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:00:18.905] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:00:18.905] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:00:18.927] data.LB_FadeInType0=100 [2025-09-23 19:00:18.927] data.CHLH_FadeInType0=0 [2025-09-23 19:00:18.927] data.WU_FadeInDelay=0 [2025-09-23 19:00:18.927] max_time_out=0 [2025-09-23 19:00:18.927] No splash screen [2025-09-23 19:00:18.927] stop dss Done [2025-09-23 19:00:18.975] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:00:18.975] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:00:19.012] /dev/mem opened. [2025-09-23 19:00:19.012] Memory mapped at address 0xffff8e6d9000. [2025-09-23 19:00:19.012] Read at address 0x00600018 (0xffff8e6d9018): 0x00000000 [2025-09-23 19:00:19.012] Write at address 0x00600018 (0xffff8e6d9018): 0x00400040, readback 0x00400040 [2025-09-23 19:00:19.092] Loaded PowerVR consumer services. [2025-09-23 19:00:19.236] 512+0 records in [2025-09-23 19:00:19.252] 512+0 records out [2025-09-23 19:00:19.252] Waiting data available... [2025-09-23 19:00:19.284] Starting syslogd/klogd: done [2025-09-23 19:00:19.315] DML Start [2025-09-23 19:00:19.492] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:00:19.732] DML res1: 0 [2025-09-23 19:00:20.141] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:00:20.141] Read Success [2025-09-23 19:00:20.141] Verifying certificate... [2025-09-23 19:00:20.365] Verified OK [2025-09-23 19:00:20.397] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:00:22.097] Verified OK [2025-09-23 19:00:22.097] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:00:22.650] Verified OK [2025-09-23 19:00:22.650] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:00:25.368] fs.protected_hardlinks = 1 [2025-09-23 19:00:25.368] fs.protected_symlinks = 1 [2025-09-23 19:00:25.385] kernel.modules_disabled = 1 [2025-09-23 19:00:25.577] [2025-09-23 19:00:25.577] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:00:26.783] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:00:34.478] SBL1:1210.0.1.0 [2025-09-23 19:00:34.526] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:00:36.092] SBL2:1210.0.1.0 [2025-09-23 19:00:36.140] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:00:36.237] j-A [2025-09-23 19:00:43.591] The R5 Autosar Classic is running [2025-09-23 19:00:43.615] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:00:43.615] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:00:44.222] INIT: version 2.96 booting [2025-09-23 19:00:44.334] INIT: Entering runlevel: 5 [2025-09-23 19:00:44.478] mtd24 attached [2025-09-23 19:00:44.494] mtd28 attached [2025-09-23 19:00:44.510] mtd32 attached [2025-09-23 19:00:44.558] ubi0:textures is mounted. [2025-09-23 19:00:44.558] RTNETLINK answers: File exists [2025-09-23 19:00:44.619] ubi1:animations is mounted. [2025-09-23 19:00:44.619] ubi2:dml_code is mounted. [2025-09-23 19:00:44.619] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:00:44.619] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:00:44.619] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:00:44.619] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:00:44.619] data.LB_FadeInType0=100 [2025-09-23 19:00:44.619] data.CHLH_FadeInType0=0 [2025-09-23 19:00:44.619] data.WU_FadeInDelay=0 [2025-09-23 19:00:44.619] max_time_out=0 [2025-09-23 19:00:44.619] No splash screen [2025-09-23 19:00:44.619] stop dss Done [2025-09-23 19:00:44.619] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:00:44.691] /dev/mem opened. [2025-09-23 19:00:44.691] Memory mapped at address 0xffff8c84d000. [2025-09-23 19:00:44.691] Read at address 0x00600018 (0xffff8c84d018): 0x00000000 [2025-09-23 19:00:44.691] Write at address 0x00600018 (0xffff8c84d018): 0x00400040, readback 0x00400040 [2025-09-23 19:00:44.691] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:00:44.691] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:00:44.868] Loaded PowerVR consumer services. [2025-09-23 19:00:44.948] Waiting data available... [2025-09-23 19:00:44.948] 512+0 records in [2025-09-23 19:00:44.948] 512+0 records out [2025-09-23 19:00:44.979] Starting syslogd/klogd: done [2025-09-23 19:00:44.995] DML Start [2025-09-23 19:00:45.171] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:00:45.363] DML res1: 0 [2025-09-23 19:00:45.837] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:00:45.837] Read Success [2025-09-23 19:00:45.837] Verifying certificate... [2025-09-23 19:00:46.094] Verified OK [2025-09-23 19:00:46.110] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:00:47.741] Verified OK [2025-09-23 19:00:47.741] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:00:48.441] Verified OK [2025-09-23 19:00:48.441] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:00:51.031] fs.protected_hardlinks = 1 [2025-09-23 19:00:51.047] fs.protected_symlinks = 1 [2025-09-23 19:00:51.047] kernel.modules_disabled = 1 [2025-09-23 19:00:51.239] [2025-09-23 19:00:51.239] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:00:52.477] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:01:00.220] SBL1:1210.0.1.0 [2025-09-23 19:01:00.268] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 19:01:01.836] SBL2:1210.0.1.0 [2025-09-23 19:01:01.867] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:01:01.979] j-A [2025-09-23 19:01:09.354] The R5 Autosar Classic is running [2025-09-23 19:01:09.354] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:01:09.354] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:01:09.962] INIT: version 2.96 booting [2025-09-23 19:01:10.074] INIT: Entering runlevel: 5 [2025-09-23 19:01:10.217] mtd24 attached [2025-09-23 19:01:10.233] mtd28 attached [2025-09-23 19:01:10.249] mtd32 attached [2025-09-23 19:01:10.297] RTNETLINK answers: File exists [2025-09-23 19:01:10.297] ubi0:textures is mounted. [2025-09-23 19:01:10.359] ubi1:animations is mounted. [2025-09-23 19:01:10.359] ubi2:dml_code is mounted. [2025-09-23 19:01:10.359] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:01:10.359] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:01:10.359] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:01:10.359] data.LB_FadeInType0=100 [2025-09-23 19:01:10.359] data.CHLH_FadeInType0=0 [2025-09-23 19:01:10.359] data.WU_FadeInDelay=0 [2025-09-23 19:01:10.359] max_time_out=0 [2025-09-23 19:01:10.359] No splash screen [2025-09-23 19:01:10.359] stop dss Done [2025-09-23 19:01:10.359] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:01:10.359] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:01:10.426] /dev/mem opened. [2025-09-23 19:01:10.426] Memory mapped at address 0xffff80027000. [2025-09-23 19:01:10.426] Read at address 0x00600018 (0xffff80027018): 0x00000000 [2025-09-23 19:01:10.426] Write at address 0x00600018 (0xffff80027018): 0x00400040, readback 0x00400040 [2025-09-23 19:01:10.457] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:01:10.473] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:01:10.681] Loaded PowerVR consumer services. [2025-09-23 19:01:10.697] 512+0 records in [2025-09-23 19:01:10.713] 512+0 records out [2025-09-23 19:01:10.713] Waiting data available... [2025-09-23 19:01:10.729] Starting syslogd/klogd: done [2025-09-23 19:01:10.745] DML Start [2025-09-23 19:01:10.937] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:01:11.177] DML res1: 0 [2025-09-23 19:01:11.602] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:01:11.602] Read Success [2025-09-23 19:01:11.602] Verifying certificate... [2025-09-23 19:01:11.841] Verified OK [2025-09-23 19:01:11.858] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:01:13.648] Verified OK [2025-09-23 19:01:13.648] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:01:14.204] Verified OK [2025-09-23 19:01:14.204] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:01:16.731] fs.protected_hardlinks = 1 [2025-09-23 19:01:16.731] fs.protected_symlinks = 1 [2025-09-23 19:01:16.747] kernel.modules_disabled = 1 [2025-09-23 19:01:16.939] [2025-09-23 19:01:16.939] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:01:18.247] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:01:25.956] SBL1:1210.0.1.0 [2025-09-23 19:01:26.004] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:01:27.571] SBL2:1210.0.1.0 [2025-09-23 19:01:27.619] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:01:27.714] j-A [2025-09-23 19:01:35.070] The R5 Autosar Classic is running [2025-09-23 19:01:35.070] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:01:35.091] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:01:35.699] INIT: version 2.96 booting [2025-09-23 19:01:35.811] INIT: Entering runlevel: 5 [2025-09-23 19:01:35.970] mtd24 attached [2025-09-23 19:01:35.970] mtd28 attached [2025-09-23 19:01:35.987] mtd32 attached [2025-09-23 19:01:36.034] RTNETLINK answers: File exists [2025-09-23 19:01:36.097] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:01:36.097] ubi0:textures is mounted. [2025-09-23 19:01:36.097] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:01:36.097] ubi1:animations is mounted. [2025-09-23 19:01:36.097] ubi2:dml_code is mounted. [2025-09-23 19:01:36.097] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:01:36.097] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:01:36.097] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:01:36.097] data.LB_FadeInType0=100 [2025-09-23 19:01:36.097] data.CHLH_FadeInType0=0 [2025-09-23 19:01:36.097] data.WU_FadeInDelay=0 [2025-09-23 19:01:36.097] max_time_out=0 [2025-09-23 19:01:36.097] No splash screen [2025-09-23 19:01:36.097] stop dss Done [2025-09-23 19:01:36.146] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:01:36.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:01:36.178] /dev/mem opened. [2025-09-23 19:01:36.178] Memory mapped at address 0xffff82f66000. [2025-09-23 19:01:36.178] Read at address 0x00600018 (0xffff82f66018): 0x00000000 [2025-09-23 19:01:36.178] Write at address 0x00600018 (0xffff82f66018): 0x00400040, readback 0x00400040 [2025-09-23 19:01:36.385] Loaded PowerVR consumer services. [2025-09-23 19:01:36.417] Waiting data available... [2025-09-23 19:01:36.433] 512+0 records in [2025-09-23 19:01:36.433] 512+0 records out [2025-09-23 19:01:36.481] Starting syslogd/klogd: done [2025-09-23 19:01:36.497] DML Start [2025-09-23 19:01:36.689] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:01:36.896] DML res1: 0 [2025-09-23 19:01:37.361] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:01:37.381] Read Success [2025-09-23 19:01:37.381] Verifying certificate... [2025-09-23 19:01:37.605] Verified OK [2025-09-23 19:01:37.622] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:01:39.290] Verified OK [2025-09-23 19:01:39.290] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:01:39.923] Verified OK [2025-09-23 19:01:39.923] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:01:42.529] fs.protected_hardlinks = 1 [2025-09-23 19:01:42.545] fs.protected_symlinks = 1 [2025-09-23 19:01:42.545] kernel.modules_disabled = 1 [2025-09-23 19:01:42.753] [2025-09-23 19:01:42.753] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:01:43.946] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:01:51.674] SBL1:1210.0.1.0 [2025-09-23 19:01:51.706] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:01:53.289] SBL2:1210.0.1.0 [2025-09-23 19:01:53.321] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:01:53.434] j-A [2025-09-23 19:02:00.807] The R5 Autosar Classic is running [2025-09-23 19:02:00.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:02:00.807] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:02:01.414] INIT: version 2.96 booting [2025-09-23 19:02:01.525] INIT: Entering runlevel: 5 [2025-09-23 19:02:01.686] mtd32 attached [2025-09-23 19:02:01.686] mtd24 attached [2025-09-23 19:02:01.702] mtd28 attached [2025-09-23 19:02:01.750] RTNETLINK answers: File exists [2025-09-23 19:02:01.816] ubi0:dml_code is mounted. [2025-09-23 19:02:01.816] ubi1:textures is mounted. [2025-09-23 19:02:01.816] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:02:01.816] ubi2:animations is mounted. [2025-09-23 19:02:01.816] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:02:01.816] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:02:01.816] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:02:01.816] data.LB_FadeInType0=100 [2025-09-23 19:02:01.816] data.CHLH_FadeInType0=0 [2025-09-23 19:02:01.816] data.WU_FadeInDelay=0 [2025-09-23 19:02:01.816] max_time_out=0 [2025-09-23 19:02:01.816] No splash screen [2025-09-23 19:02:01.816] stop dss Done [2025-09-23 19:02:01.816] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:02:01.847] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:02:01.892] /dev/mem opened. [2025-09-23 19:02:01.892] Memory mapped at address 0xffffbc97c000. [2025-09-23 19:02:01.892] Read at address 0x00600018 (0xffffbc97c018): 0x00000000 [2025-09-23 19:02:01.892] Write at address 0x00600018 (0xffffbc97c018): 0x00400040, readback 0x00400040 [2025-09-23 19:02:01.892] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:02:01.988] Loaded PowerVR consumer services. [2025-09-23 19:02:02.140] 512+0 records in [2025-09-23 19:02:02.140] 512+0 records out [2025-09-23 19:02:02.140] Waiting data available... [2025-09-23 19:02:02.156] Starting syslogd/klogd: done [2025-09-23 19:02:02.172] DML Start [2025-09-23 19:02:02.316] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:02:02.556] DML res1: 0 [2025-09-23 19:02:03.044] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:02:03.044] Read Success [2025-09-23 19:02:03.044] Verifying certificate... [2025-09-23 19:02:03.251] Verified OK [2025-09-23 19:02:03.267] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:02:04.841] Verified OK [2025-09-23 19:02:04.841] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:02:05.431] Verified OK [2025-09-23 19:02:05.431] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:02:08.197] fs.protected_hardlinks = 1 [2025-09-23 19:02:08.197] fs.protected_symlinks = 1 [2025-09-23 19:02:08.212] kernel.modules_disabled = 1 [2025-09-23 19:02:08.405] [2025-09-23 19:02:08.405] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:02:09.650] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:02:17.368] SBL1:1210.0.1.0 [2025-09-23 19:02:17.417] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:02:18.983] SBL2:1210.0.1.0 [2025-09-23 19:02:19.031] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:02:19.144] j-A [2025-09-23 19:02:26.483] The R5 Autosar Classic is running [2025-09-23 19:02:26.508] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:02:26.508] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:02:27.116] INIT: version 2.96 booting [2025-09-23 19:02:27.227] INIT: Entering runlevel: 5 [2025-09-23 19:02:27.371] mtd24 attached [2025-09-23 19:02:27.387] mtd32 attached [2025-09-23 19:02:27.403] mtd28 attached [2025-09-23 19:02:27.419] ubi0:textures is mounted. [2025-09-23 19:02:27.452] ubi1:dml_code is mounted. [2025-09-23 19:02:27.452] RTNETLINK answers: File exists [2025-09-23 19:02:27.504] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:02:27.504] ubi2:animations is mounted. [2025-09-23 19:02:27.504] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:02:27.504] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:02:27.504] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:02:27.504] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:02:27.504] data.LB_FadeInType0=100 [2025-09-23 19:02:27.504] data.CHLH_FadeInType0=0 [2025-09-23 19:02:27.504] data.WU_FadeInDelay=0 [2025-09-23 19:02:27.504] max_time_out=0 [2025-09-23 19:02:27.504] No splash screen [2025-09-23 19:02:27.504] stop dss Done [2025-09-23 19:02:27.580] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:02:27.580] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:02:27.580] /dev/mem opened. [2025-09-23 19:02:27.580] Memory mapped at address 0xffff9c5be000. [2025-09-23 19:02:27.580] Read at address 0x00600018 (0xffff9c5be018): 0x00000000 [2025-09-23 19:02:27.580] Write at address 0x00600018 (0xffff9c5be018): 0x00400040, readback 0x00400040 [2025-09-23 19:02:27.676] Loaded PowerVR consumer services. [2025-09-23 19:02:27.833] Waiting data available... [2025-09-23 19:02:27.833] 512+0 records in [2025-09-23 19:02:27.833] 512+0 records out [2025-09-23 19:02:27.881] Starting syslogd/klogd: done [2025-09-23 19:02:27.897] DML Start [2025-09-23 19:02:28.073] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:02:28.297] DML res1: 0 [2025-09-23 19:02:28.775] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:02:28.775] Read Success [2025-09-23 19:02:28.775] Verifying certificate... [2025-09-23 19:02:29.015] Verified OK [2025-09-23 19:02:29.031] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:02:30.693] Verified OK [2025-09-23 19:02:30.693] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:02:31.296] Verified OK [2025-09-23 19:02:31.296] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:02:33.982] fs.protected_hardlinks = 1 [2025-09-23 19:02:33.998] fs.protected_symlinks = 1 [2025-09-23 19:02:33.998] kernel.modules_disabled = 1 [2025-09-23 19:02:34.189] [2025-09-23 19:02:34.189] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:02:35.371] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:02:43.088] SBL1:1210.0.1.0 [2025-09-23 19:02:43.136] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:02:44.703] SBL2:1210.0.1.0 [2025-09-23 19:02:44.751] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:02:44.847] j-A [2025-09-23 19:02:52.202] The R5 Autosar Classic is running [2025-09-23 19:02:52.224] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:02:52.224] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:02:52.832] INIT: version 2.96 booting [2025-09-23 19:02:52.944] INIT: Entering runlevel: 5 [2025-09-23 19:02:53.104] mtd24 attached [2025-09-23 19:02:53.104] mtd28 attached [2025-09-23 19:02:53.120] mtd32 attached [2025-09-23 19:02:53.152] ubi0:textures is mounted. [2025-09-23 19:02:53.168] RTNETLINK answers: File exists [2025-09-23 19:02:53.233] ubi2:dml_code is mounted. [2025-09-23 19:02:53.233] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:02:53.233] ubi1:animations is mounted. [2025-09-23 19:02:53.233] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:02:53.233] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:02:53.233] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:02:53.233] data.LB_FadeInType0=100 [2025-09-23 19:02:53.233] data.CHLH_FadeInType0=0 [2025-09-23 19:02:53.233] data.WU_FadeInDelay=0 [2025-09-23 19:02:53.233] max_time_out=0 [2025-09-23 19:02:53.233] No splash screen [2025-09-23 19:02:53.233] stop dss Done [2025-09-23 19:02:53.233] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:02:53.281] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:02:53.318] /dev/mem opened. [2025-09-23 19:02:53.318] Memory mapped at address 0xffffaf429000. [2025-09-23 19:02:53.318] Read at address 0x00600018 (0xffffaf429018): 0x00000000 [2025-09-23 19:02:53.318] Write at address 0x00600018 (0xffffaf429018): 0x00400040, readback 0x00400040 [2025-09-23 19:02:53.318] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:02:53.526] Loaded PowerVR consumer services. [2025-09-23 19:02:53.558] Waiting data available... [2025-09-23 19:02:53.573] 512+0 records in [2025-09-23 19:02:53.573] 512+0 records out [2025-09-23 19:02:53.621] Starting syslogd/klogd: done [2025-09-23 19:02:53.637] DML Start [2025-09-23 19:02:53.798] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:02:54.054] DML res1: 0 [2025-09-23 19:02:54.380] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:02:54.380] Read Success [2025-09-23 19:02:54.380] Verifying certificate... [2025-09-23 19:02:54.603] Verified OK [2025-09-23 19:02:54.619] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:02:56.138] Verified OK [2025-09-23 19:02:56.138] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:02:56.857] Verified OK [2025-09-23 19:02:56.857] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:02:59.640] fs.protected_hardlinks = 1 [2025-09-23 19:02:59.640] fs.protected_symlinks = 1 [2025-09-23 19:02:59.656] kernel.modules_disabled = 1 [2025-09-23 19:02:59.831] [2025-09-23 19:02:59.831] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:03:01.142] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:03:08.836] SBL1:1210.0.1.0 [2025-09-23 19:03:08.884] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 19:03:10.451] SBL2:1210.0.1.0 [2025-09-23 19:03:10.483] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:03:10.595] j-A [2025-09-23 19:03:17.971] The R5 Autosar Classic is running [2025-09-23 19:03:17.971] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:03:17.971] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:03:18.578] INIT: version 2.96 booting [2025-09-23 19:03:18.690] INIT: Entering runlevel: 5 [2025-09-23 19:03:18.834] mtd24 attached [2025-09-23 19:03:18.850] mtd32 attached [2025-09-23 19:03:18.866] mtd28 attached [2025-09-23 19:03:18.898] ubi0:textures is mounted. [2025-09-23 19:03:18.914] RTNETLINK answers: File exists [2025-09-23 19:03:18.973] ubi1:dml_code is mounted. [2025-09-23 19:03:18.973] ubi2:animations is mounted. [2025-09-23 19:03:18.973] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:03:18.973] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:03:18.973] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:03:18.973] data.LB_FadeInType0=100 [2025-09-23 19:03:18.973] data.CHLH_FadeInType0=0 [2025-09-23 19:03:18.973] data.WU_FadeInDelay=0 [2025-09-23 19:03:18.973] max_time_out=0 [2025-09-23 19:03:18.973] No splash screen [2025-09-23 19:03:18.973] stop dss Done [2025-09-23 19:03:18.973] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:03:18.973] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:03:19.021] /dev/mem opened. [2025-09-23 19:03:19.021] Memory mapped at address 0xffffaa8c3000. [2025-09-23 19:03:19.058] Read at address 0x00600018 (0xffffaa8c3018): 0x00000000 [2025-09-23 19:03:19.058] Write at address 0x00600018 (0xffffaa8c3018): 0x00400040, readback 0x00400040 [2025-09-23 19:03:19.058] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:03:19.058] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:03:19.266] Loaded PowerVR consumer services. [2025-09-23 19:03:19.282] Waiting data available... [2025-09-23 19:03:19.298] 512+0 records in [2025-09-23 19:03:19.298] 512+0 records out [2025-09-23 19:03:19.346] Starting syslogd/klogd: done [2025-09-23 19:03:19.362] DML Start [2025-09-23 19:03:19.537] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:03:19.793] DML res1: 0 [2025-09-23 19:03:20.203] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:03:20.203] Read Success [2025-09-23 19:03:20.203] Verifying certificate... [2025-09-23 19:03:20.459] Verified OK [2025-09-23 19:03:20.475] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:03:22.066] Verified OK [2025-09-23 19:03:22.066] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:03:22.641] Verified OK [2025-09-23 19:03:22.641] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:03:25.439] fs.protected_hardlinks = 1 [2025-09-23 19:03:25.469] fs.protected_symlinks = 1 [2025-09-23 19:03:25.469] kernel.modules_disabled = 1 [2025-09-23 19:03:25.645] [2025-09-23 19:03:25.645] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:03:26.918] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:03:34.545] SBL1:1210.0.1.0 [2025-09-23 19:03:34.593] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:03:36.161] SBL2:1210.0.1.0 [2025-09-23 19:03:36.193] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:03:36.304] j-A [2025-09-23 19:03:43.659] The R5 Autosar Classic is running [2025-09-23 19:03:43.659] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:03:43.680] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:03:44.289] INIT: version 2.96 booting [2025-09-23 19:03:44.400] INIT: Entering runlevel: 5 [2025-09-23 19:03:44.544] mtd28 attached [2025-09-23 19:03:44.560] mtd24 attached [2025-09-23 19:03:44.576] mtd32 attached [2025-09-23 19:03:44.624] RTNETLINK answers: File exists [2025-09-23 19:03:44.624] ubi0:animations is mounted. [2025-09-23 19:03:44.680] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:03:44.680] ubi2:dml_code is mounted. [2025-09-23 19:03:44.680] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:03:44.680] ubi1:textures is mounted. [2025-09-23 19:03:44.680] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:03:44.680] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:03:44.680] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:03:44.680] data.LB_FadeInType0=100 [2025-09-23 19:03:44.680] data.CHLH_FadeInType0=0 [2025-09-23 19:03:44.680] data.WU_FadeInDelay=0 [2025-09-23 19:03:44.680] max_time_out=0 [2025-09-23 19:03:44.680] No splash screen [2025-09-23 19:03:44.680] stop dss Done [2025-09-23 19:03:44.728] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:03:44.766] /dev/mem opened. [2025-09-23 19:03:44.766] Memory mapped at address 0xffffa3dd1000. [2025-09-23 19:03:44.766] Read at address 0x00600018 (0xffffa3dd1018): 0x00000000 [2025-09-23 19:03:44.766] Write at address 0x00600018 (0xffffa3dd1018): 0x00400040, readback 0x00400040 [2025-09-23 19:03:44.766] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:03:44.846] Loaded PowerVR consumer services. [2025-09-23 19:03:44.990] Waiting data available... [2025-09-23 19:03:45.006] 512+0 records in [2025-09-23 19:03:45.006] 512+0 records out [2025-09-23 19:03:45.022] Starting syslogd/klogd: done [2025-09-23 19:03:45.038] DML Start [2025-09-23 19:03:45.213] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:03:45.453] DML res1: 0 [2025-09-23 19:03:45.868] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:03:45.868] Read Success [2025-09-23 19:03:45.868] Verifying certificate... [2025-09-23 19:03:46.124] Verified OK [2025-09-23 19:03:46.140] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:03:47.772] Verified OK [2025-09-23 19:03:47.793] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:03:48.426] Verified OK [2025-09-23 19:03:48.426] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:03:51.129] fs.protected_hardlinks = 1 [2025-09-23 19:03:51.145] fs.protected_symlinks = 1 [2025-09-23 19:03:51.161] kernel.modules_disabled = 1 [2025-09-23 19:03:51.352] [2025-09-23 19:03:51.352] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:03:52.535] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:04:00.272] SBL1:1210.0.1.0 [2025-09-23 19:04:00.304] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:04:01.887] SBL2:1210.0.1.0 [2025-09-23 19:04:01.919] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:04:02.031] j-A [2025-09-23 19:04:09.405] The R5 Autosar Classic is running [2025-09-23 19:04:09.405] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:04:09.405] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:04:10.013] INIT: version 2.96 booting [2025-09-23 19:04:10.124] INIT: Entering runlevel: 5 [2025-09-23 19:04:10.284] mtd24 attached [2025-09-23 19:04:10.284] mtd28 attached [2025-09-23 19:04:10.300] mtd32 attached [2025-09-23 19:04:10.348] RTNETLINK answers: File exists [2025-09-23 19:04:10.390] ubi1:animations is mounted. [2025-09-23 19:04:10.390] ubi0:textures is mounted. [2025-09-23 19:04:10.390] ubi2:dml_code is mounted. [2025-09-23 19:04:10.390] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:04:10.390] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:04:10.390] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:04:10.390] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:04:10.418] data.LB_FadeInType0=100 [2025-09-23 19:04:10.418] data.CHLH_FadeInType0=0 [2025-09-23 19:04:10.418] data.WU_FadeInDelay=0 [2025-09-23 19:04:10.418] max_time_out=0 [2025-09-23 19:04:10.418] No splash screen [2025-09-23 19:04:10.418] stop dss Done [2025-09-23 19:04:10.418] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:04:10.450] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:04:10.488] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:04:10.488] /dev/mem opened. [2025-09-23 19:04:10.488] Memory mapped at address 0xffffab129000. [2025-09-23 19:04:10.488] Read at address 0x00600018 (0xffffab129018): 0x00000000 [2025-09-23 19:04:10.488] Write at address 0x00600018 (0xffffab129018): 0x00400040, readback 0x00400040 [2025-09-23 19:04:10.552] Loaded PowerVR consumer services. [2025-09-23 19:04:10.728] Waiting data available... [2025-09-23 19:04:10.744] 512+0 records in [2025-09-23 19:04:10.744] 512+0 records out [2025-09-23 19:04:10.760] Starting syslogd/klogd: done [2025-09-23 19:04:10.776] DML Start [2025-09-23 19:04:10.968] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:04:11.224] DML res1: 0 [2025-09-23 19:04:11.591] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:04:11.613] Read Success [2025-09-23 19:04:11.613] Verifying certificate... [2025-09-23 19:04:11.837] Verified OK [2025-09-23 19:04:11.853] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:04:13.331] Verified OK [2025-09-23 19:04:13.331] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:04:13.975] Verified OK [2025-09-23 19:04:13.975] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:04:16.869] fs.protected_hardlinks = 1 [2025-09-23 19:04:16.869] fs.protected_symlinks = 1 [2025-09-23 19:04:16.886] kernel.modules_disabled = 1 [2025-09-23 19:04:17.077] [2025-09-23 19:04:17.077] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:04:18.306] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:04:25.976] SBL1:1210.0.1.0 [2025-09-23 19:04:26.024] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:04:27.607] SBL2:1210.0.1.0 [2025-09-23 19:04:27.639] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:04:27.750] j-A [2025-09-23 19:04:35.090] The R5 Autosar Classic is running [2025-09-23 19:04:35.115] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:04:35.115] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:04:35.722] INIT: version 2.96 booting [2025-09-23 19:04:35.834] INIT: Entering runlevel: 5 [2025-09-23 19:04:35.994] mtd32 attached [2025-09-23 19:04:35.994] mtd28 attached [2025-09-23 19:04:36.010] mtd24 attached [2025-09-23 19:04:36.026] ubi0:dml_code is mounted. [2025-09-23 19:04:36.058] ubi1:animations is mounted. [2025-09-23 19:04:36.058] RTNETLINK answers: File exists [2025-09-23 19:04:36.121] ubi2:textures is mounted. [2025-09-23 19:04:36.121] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:04:36.121] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:04:36.121] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:04:36.121] data.LB_FadeInType0=100 [2025-09-23 19:04:36.121] data.CHLH_FadeInType0=0 [2025-09-23 19:04:36.121] data.WU_FadeInDelay=0 [2025-09-23 19:04:36.121] max_time_out=0 [2025-09-23 19:04:36.121] No splash screen [2025-09-23 19:04:36.121] stop dss Done [2025-09-23 19:04:36.121] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:04:36.121] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:04:36.192] /dev/mem opened. [2025-09-23 19:04:36.192] Memory mapped at address 0xffff86f62000. [2025-09-23 19:04:36.192] Read at address 0x00600018 (0xffff86f62018): 0x00000000 [2025-09-23 19:04:36.192] Write at address 0x00600018 (0xffff86f62018): 0x00400040, readback 0x00400040 [2025-09-23 19:04:36.192] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:04:36.208] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:04:36.400] Loaded PowerVR consumer services. [2025-09-23 19:04:36.432] Waiting data available... [2025-09-23 19:04:36.448] 512+0 records in [2025-09-23 19:04:36.448] 512+0 records out [2025-09-23 19:04:36.496] Starting syslogd/klogd: done [2025-09-23 19:04:36.512] DML Start [2025-09-23 19:04:36.704] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:04:36.943] DML res1: 0 [2025-09-23 19:04:37.302] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:04:37.302] Read Success [2025-09-23 19:04:37.302] Verifying certificate... [2025-09-23 19:04:37.542] Verified OK [2025-09-23 19:04:37.542] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:04:39.217] Verified OK [2025-09-23 19:04:39.217] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:04:39.856] Verified OK [2025-09-23 19:04:39.856] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:04:42.494] fs.protected_hardlinks = 1 [2025-09-23 19:04:42.494] fs.protected_symlinks = 1 [2025-09-23 19:04:42.511] kernel.modules_disabled = 1 [2025-09-23 19:04:42.702] [2025-09-23 19:04:42.702] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:04:44.022] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:04:51.706] SBL1:1210.0.1.0 [2025-09-23 19:04:51.754] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:04:53.321] SBL2:1210.0.1.0 [2025-09-23 19:04:53.353] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:04:53.465] j-A [2025-09-23 19:05:00.841] The R5 Autosar Classic is running [2025-09-23 19:05:00.841] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:05:00.841] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:05:01.448] INIT: version 2.96 booting [2025-09-23 19:05:01.559] INIT: Entering runlevel: 5 [2025-09-23 19:05:01.720] mtd32 attached [2025-09-23 19:05:01.720] mtd24 attached [2025-09-23 19:05:01.720] mtd28 attached [2025-09-23 19:05:01.784] ubi1:textures is mounted. [2025-09-23 19:05:01.784] RTNETLINK answers: File exists [2025-09-23 19:05:01.818] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:05:01.818] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:05:01.818] ubi0:dml_code is mounted. [2025-09-23 19:05:01.818] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:05:01.818] ubi2:animations is mounted. [2025-09-23 19:05:01.818] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:05:01.818] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:05:01.847] data.LB_FadeInType0=100 [2025-09-23 19:05:01.847] data.CHLH_FadeInType0=0 [2025-09-23 19:05:01.847] data.WU_FadeInDelay=0 [2025-09-23 19:05:01.847] max_time_out=0 [2025-09-23 19:05:01.847] No splash screen [2025-09-23 19:05:01.847] stop dss Done [2025-09-23 19:05:01.879] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:05:01.894] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:05:01.894] /dev/mem opened. [2025-09-23 19:05:01.926] Memory mapped at address 0xffff9b99a000. [2025-09-23 19:05:01.926] Read at address 0x00600018 (0xffff9b99a018): 0x00000000 [2025-09-23 19:05:01.926] Write at address 0x00600018 (0xffff9b99a018): 0x00400040, readback 0x00400040 [2025-09-23 19:05:02.071] Loaded PowerVR consumer services. [2025-09-23 19:05:02.188] Waiting data available... [2025-09-23 19:05:02.188] 512+0 records in [2025-09-23 19:05:02.188] 512+0 records out [2025-09-23 19:05:02.220] Starting syslogd/klogd: done [2025-09-23 19:05:02.236] DML Start [2025-09-23 19:05:02.412] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:05:02.636] DML res1: 0 [2025-09-23 19:05:03.074] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:05:03.074] Read Success [2025-09-23 19:05:03.074] Verifying certificate... [2025-09-23 19:05:03.299] Verified OK [2025-09-23 19:05:03.314] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:05:04.922] Verified OK [2025-09-23 19:05:04.922] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:05:05.606] Verified OK [2025-09-23 19:05:05.606] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:05:08.228] fs.protected_hardlinks = 1 [2025-09-23 19:05:08.228] fs.protected_symlinks = 1 [2025-09-23 19:05:08.244] kernel.modules_disabled = 1 [2025-09-23 19:05:08.436] [2025-09-23 19:05:08.436] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:05:09.761] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:05:17.428] SBL1:1210.0.1.0 [2025-09-23 19:05:17.476] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:05:19.042] SBL2:1210.0.1.0 [2025-09-23 19:05:19.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:05:19.203] j-A [2025-09-23 19:05:26.540] The R5 Autosar Classic is running [2025-09-23 19:05:26.565] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:05:26.565] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:05:27.173] INIT: version 2.96 booting [2025-09-23 19:05:27.284] INIT: Entering runlevel: 5 [2025-09-23 19:05:27.429] mtd24 attached [2025-09-23 19:05:27.445] mtd28 attached [2025-09-23 19:05:27.461] mtd32 attached [2025-09-23 19:05:27.509] ubi0:textures is mounted. [2025-09-23 19:05:27.509] RTNETLINK answers: File exists [2025-09-23 19:05:27.565] ubi2:dml_code is mounted. [2025-09-23 19:05:27.565] ubi1:animations is mounted. [2025-09-23 19:05:27.565] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:05:27.565] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:05:27.566] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:05:27.566] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:05:27.566] data.LB_FadeInType0=100 [2025-09-23 19:05:27.566] data.CHLH_FadeInType0=0 [2025-09-23 19:05:27.566] data.WU_FadeInDelay=0 [2025-09-23 19:05:27.566] max_time_out=0 [2025-09-23 19:05:27.566] No splash screen [2025-09-23 19:05:27.566] stop dss Done [2025-09-23 19:05:27.566] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:05:27.654] /dev/mem opened. [2025-09-23 19:05:27.654] Memory mapped at address 0xffff84f30000. [2025-09-23 19:05:27.654] Read at address 0x00600018 (0xffff84f30018): 0x00000000 [2025-09-23 19:05:27.654] Write at address 0x00600018 (0xffff84f30018): 0x00400040, readback 0x00400040 [2025-09-23 19:05:27.654] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:05:27.654] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:05:27.846] Loaded PowerVR consumer services. [2025-09-23 19:05:27.893] Waiting data available... [2025-09-23 19:05:27.910] 512+0 records in [2025-09-23 19:05:27.910] 512+0 records out [2025-09-23 19:05:27.957] Starting syslogd/klogd: done [2025-09-23 19:05:27.973] DML Start [2025-09-23 19:05:28.165] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:05:28.389] DML res1: 0 [2025-09-23 19:05:28.851] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:05:28.851] Read Success [2025-09-23 19:05:28.851] Verifying certificate... [2025-09-23 19:05:29.107] Verified OK [2025-09-23 19:05:29.123] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:05:30.704] Verified OK [2025-09-23 19:05:30.704] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:05:31.372] Verified OK [2025-09-23 19:05:31.372] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:05:33.979] fs.protected_hardlinks = 1 [2025-09-23 19:05:33.995] fs.protected_symlinks = 1 [2025-09-23 19:05:33.995] kernel.modules_disabled = 1 [2025-09-23 19:05:34.187] [2025-09-23 19:05:34.187] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:05:35.473] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:05:43.130] SBL1:1210.0.1.0 [2025-09-23 19:05:43.178] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:05:44.746] SBL2:1210.0.1.0 [2025-09-23 19:05:44.793] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:05:44.905] j-A [2025-09-23 19:05:52.244] The R5 Autosar Classic is running [2025-09-23 19:05:52.269] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:05:52.269] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:05:52.877] INIT: version 2.96 booting [2025-09-23 19:05:52.988] INIT: Entering runlevel: 5 [2025-09-23 19:05:53.148] mtd24 attached [2025-09-23 19:05:53.148] mtd28 attached [2025-09-23 19:05:53.164] mtd32 attached [2025-09-23 19:05:53.212] ubi0:textures is mounted. [2025-09-23 19:05:53.212] RTNETLINK answers: File exists [2025-09-23 19:05:53.270] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:05:53.270] ubi1:animations is mounted. [2025-09-23 19:05:53.270] ubi2:dml_code is mounted. [2025-09-23 19:05:53.270] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:05:53.270] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:05:53.270] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:05:53.270] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:05:53.270] data.LB_FadeInType0=100 [2025-09-23 19:05:53.270] data.CHLH_FadeInType0=0 [2025-09-23 19:05:53.270] data.WU_FadeInDelay=0 [2025-09-23 19:05:53.270] max_time_out=0 [2025-09-23 19:05:53.270] No splash screen [2025-09-23 19:05:53.270] stop dss Done [2025-09-23 19:05:53.345] /dev/mem opened. [2025-09-23 19:05:53.345] Memory mapped at address 0xffffbb1ee000. [2025-09-23 19:05:53.345] Read at address 0x00600018 (0xffffbb1ee018): 0x00000000 [2025-09-23 19:05:53.345] Write at address 0x00600018 (0xffffbb1ee018): 0x00400040, readback 0x00400040 [2025-09-23 19:05:53.345] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:05:53.345] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:05:53.441] Loaded PowerVR consumer services. [2025-09-23 19:05:53.612] Waiting data available... [2025-09-23 19:05:53.612] 512+0 records in [2025-09-23 19:05:53.612] 512+0 records out [2025-09-23 19:05:53.644] Starting syslogd/klogd: done [2025-09-23 19:05:53.660] DML Start [2025-09-23 19:05:53.819] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:05:54.043] DML res1: 0 [2025-09-23 19:05:54.507] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:05:54.507] Read Success [2025-09-23 19:05:54.523] Verifying certificate... [2025-09-23 19:05:54.747] Verified OK [2025-09-23 19:05:54.779] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:05:56.442] Verified OK [2025-09-23 19:05:56.442] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:05:57.079] Verified OK [2025-09-23 19:05:57.079] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:05:59.620] fs.protected_hardlinks = 1 [2025-09-23 19:05:59.621] fs.protected_symlinks = 1 [2025-09-23 19:05:59.621] kernel.modules_disabled = 1 [2025-09-23 19:05:59.812] [2025-09-23 19:05:59.812] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:06:01.097] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:06:08.869] SBL1:1210.0.1.0 [2025-09-23 19:06:08.917] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:06:10.484] SBL2:1210.0.1.0 [2025-09-23 19:06:10.516] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:06:10.628] j-A [2025-09-23 19:06:18.002] The R5 Autosar Classic is running [2025-09-23 19:06:18.002] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:06:18.002] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:06:18.610] INIT: version 2.96 booting [2025-09-23 19:06:18.721] INIT: Entering runlevel: 5 [2025-09-23 19:06:18.882] mtd24 attached [2025-09-23 19:06:18.882] mtd28 attached [2025-09-23 19:06:18.898] mtd32 attached [2025-09-23 19:06:18.945] RTNETLINK answers: File exists [2025-09-23 19:06:19.001] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:06:19.001] ubi0:textures is mounted. [2025-09-23 19:06:19.001] ubi2:dml_code is mounted. [2025-09-23 19:06:19.001] ubi1:animations is mounted. [2025-09-23 19:06:19.001] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:06:19.001] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:06:19.001] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:06:19.001] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:06:19.001] data.LB_FadeInType0=100 [2025-09-23 19:06:19.022] data.CHLH_FadeInType0=0 [2025-09-23 19:06:19.022] data.WU_FadeInDelay=0 [2025-09-23 19:06:19.022] max_time_out=0 [2025-09-23 19:06:19.022] No splash screen [2025-09-23 19:06:19.022] stop dss Done [2025-09-23 19:06:19.087] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:06:19.120] /dev/mem opened. [2025-09-23 19:06:19.120] Memory mapped at address 0xffffb935a000. [2025-09-23 19:06:19.120] Read at address 0x00600018 (0xffffb935a018): 0x00000000 [2025-09-23 19:06:19.120] Write at address 0x00600018 (0xffffb935a018): 0x00400040, readback 0x00400040 [2025-09-23 19:06:19.120] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:06:19.215] Loaded PowerVR consumer services. [2025-09-23 19:06:19.371] 512+0 records in [2025-09-23 19:06:19.371] 512+0 records out [2025-09-23 19:06:19.371] Waiting data available... [2025-09-23 19:06:19.387] Starting syslogd/klogd: done [2025-09-23 19:06:19.420] DML Start [2025-09-23 19:06:19.595] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:06:19.819] DML res1: 0 [2025-09-23 19:06:20.274] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:06:20.274] Read Success [2025-09-23 19:06:20.274] Verifying certificate... [2025-09-23 19:06:20.514] Verified OK [2025-09-23 19:06:20.530] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:06:22.010] Verified OK [2025-09-23 19:06:22.010] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:06:22.577] Verified OK [2025-09-23 19:06:22.577] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:06:25.407] fs.protected_hardlinks = 1 [2025-09-23 19:06:25.422] fs.protected_symlinks = 1 [2025-09-23 19:06:25.422] kernel.modules_disabled = 1 [2025-09-23 19:06:25.615] [2025-09-23 19:06:25.615] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:06:26.901] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:06:34.608] SBL1:1210.0.1.0 [2025-09-23 19:06:34.656] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:06:36.222] SBL2:1210.0.1.0 [2025-09-23 19:06:36.270] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:06:36.366] j-A [2025-09-23 19:06:43.722] The R5 Autosar Classic is running [2025-09-23 19:06:43.744] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:06:43.744] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:06:44.352] INIT: version 2.96 booting [2025-09-23 19:06:44.464] INIT: Entering runlevel: 5 [2025-09-23 19:06:44.623] mtd28 attached [2025-09-23 19:06:44.640] mtd24 attached [2025-09-23 19:06:44.640] mtd32 attached [2025-09-23 19:06:44.754] RTNETLINK answers: File exists [2025-09-23 19:06:44.754] ubi0:animations is mounted. [2025-09-23 19:06:44.754] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:06:44.754] ubi1:textures is mounted. [2025-09-23 19:06:44.754] ubi2:dml_code is mounted. [2025-09-23 19:06:44.754] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:06:44.754] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:06:44.754] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:06:44.754] data.LB_FadeInType0=100 [2025-09-23 19:06:44.754] data.CHLH_FadeInType0=0 [2025-09-23 19:06:44.754] data.WU_FadeInDelay=0 [2025-09-23 19:06:44.754] max_time_out=0 [2025-09-23 19:06:44.754] No splash screen [2025-09-23 19:06:44.754] stop dss Done [2025-09-23 19:06:44.754] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:06:44.829] /dev/mem opened. [2025-09-23 19:06:44.829] Memory mapped at address 0xffff9733d000. [2025-09-23 19:06:44.829] Read at address 0x00600018 (0xffff9733d018): 0x00000000 [2025-09-23 19:06:44.829] Write at address 0x00600018 (0xffff9733d018): 0x00400040, readback 0x00400040 [2025-09-23 19:06:44.829] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:06:44.829] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:06:45.099] Waiting data available... [2025-09-23 19:06:45.099] Loaded PowerVR consumer services. [2025-09-23 19:06:45.115] 512+0 records in [2025-09-23 19:06:45.115] 512+0 records out [2025-09-23 19:06:45.164] Starting syslogd/klogd: done [2025-09-23 19:06:45.179] DML Start [2025-09-23 19:06:45.371] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:06:45.595] DML res1: 0 [2025-09-23 19:06:46.059] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:06:46.075] Read Success [2025-09-23 19:06:46.075] Verifying certificate... [2025-09-23 19:06:46.314] Verified OK [2025-09-23 19:06:46.330] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:06:48.021] Verified OK [2025-09-23 19:06:48.021] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:06:48.549] Verified OK [2025-09-23 19:06:48.565] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:06:51.124] fs.protected_hardlinks = 1 [2025-09-23 19:06:51.140] fs.protected_symlinks = 1 [2025-09-23 19:06:51.155] kernel.modules_disabled = 1 [2025-09-23 19:06:51.347] [2025-09-23 19:06:51.347] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:06:52.658] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:07:00.343] SBL1:1210.0.1.0 [2025-09-23 19:07:00.375] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:07:01.957] SBL2:1210.0.1.0 [2025-09-23 19:07:01.989] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:07:02.102] j-A [2025-09-23 19:07:09.441] The R5 Autosar Classic is running [2025-09-23 19:07:09.472] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:07:09.472] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:07:10.081] INIT: version 2.96 booting [2025-09-23 19:07:10.192] INIT: Entering runlevel: 5 [2025-09-23 19:07:10.352] mtd28 attached [2025-09-23 19:07:10.352] mtd24 attached [2025-09-23 19:07:10.368] mtd32 attached [2025-09-23 19:07:10.416] ubi0:animations is mounted. [2025-09-23 19:07:10.416] RTNETLINK answers: File exists [2025-09-23 19:07:10.482] ubi1:textures is mounted. [2025-09-23 19:07:10.482] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:07:10.482] ubi2:dml_code is mounted. [2025-09-23 19:07:10.482] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:07:10.482] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:07:10.482] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:07:10.482] data.LB_FadeInType0=100 [2025-09-23 19:07:10.482] data.CHLH_FadeInType0=0 [2025-09-23 19:07:10.482] data.WU_FadeInDelay=0 [2025-09-23 19:07:10.482] max_time_out=0 [2025-09-23 19:07:10.482] No splash screen [2025-09-23 19:07:10.482] stop dss Done [2025-09-23 19:07:10.482] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:07:10.556] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:07:10.556] /dev/mem opened. [2025-09-23 19:07:10.556] Memory mapped at address 0xffff81325000. [2025-09-23 19:07:10.556] Read at address 0x00600018 (0xffff81325018): 0x00000000 [2025-09-23 19:07:10.556] Write at address 0x00600018 (0xffff81325018): 0x00400040, readback 0x00400040 [2025-09-23 19:07:10.556] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:07:10.700] Loaded PowerVR consumer services. [2025-09-23 19:07:10.811] Waiting data available... [2025-09-23 19:07:10.827] 512+0 records in [2025-09-23 19:07:10.827] 512+0 records out [2025-09-23 19:07:10.860] Starting syslogd/klogd: done [2025-09-23 19:07:10.876] DML Start [2025-09-23 19:07:11.052] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:07:11.243] DML res1: 0 [2025-09-23 19:07:11.740] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:07:11.761] Read Success [2025-09-23 19:07:11.761] Verifying certificate... [2025-09-23 19:07:11.985] Verified OK [2025-09-23 19:07:12.000] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:07:13.669] Verified OK [2025-09-23 19:07:13.669] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:07:14.219] Verified OK [2025-09-23 19:07:14.219] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:07:16.650] fs.protected_hardlinks = 1 [2025-09-23 19:07:16.666] fs.protected_symlinks = 1 [2025-09-23 19:07:16.666] kernel.modules_disabled = 1 [2025-09-23 19:07:16.874] [2025-09-23 19:07:16.874] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:07:18.306] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:07:26.070] SBL1:1210.0.1.0 [2025-09-23 19:07:26.117] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:07:27.684] SBL2:1210.0.1.0 [2025-09-23 19:07:27.732] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:07:27.828] j-A [2025-09-23 19:07:35.183] The R5 Autosar Classic is running [2025-09-23 19:07:35.183] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:07:35.204] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:07:35.812] INIT: version 2.96 booting [2025-09-23 19:07:35.924] INIT: Entering runlevel: 5 [2025-09-23 19:07:36.068] mtd24 attached [2025-09-23 19:07:36.084] mtd28 attached [2025-09-23 19:07:36.100] mtd32 attached [2025-09-23 19:07:36.116] ubi0:textures is mounted. [2025-09-23 19:07:36.148] RTNETLINK answers: File exists [2025-09-23 19:07:36.179] ubi1:animations is mounted. [2025-09-23 19:07:36.179] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:07:36.179] ubi2:dml_code is mounted. [2025-09-23 19:07:36.179] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:07:36.179] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:07:36.179] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:07:36.211] data.LB_FadeInType0=100 [2025-09-23 19:07:36.211] data.CHLH_FadeInType0=0 [2025-09-23 19:07:36.211] data.WU_FadeInDelay=0 [2025-09-23 19:07:36.211] max_time_out=0 [2025-09-23 19:07:36.211] No splash screen [2025-09-23 19:07:36.211] stop dss Done [2025-09-23 19:07:36.211] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:07:36.280] /dev/mem opened. [2025-09-23 19:07:36.280] Memory mapped at address 0xffffb000c000. [2025-09-23 19:07:36.280] Read at address 0x00600018 (0xffffb000c018): 0x00000000 [2025-09-23 19:07:36.280] Write at address 0x00600018 (0xffffb000c018): 0x00400040, readback 0x00400040 [2025-09-23 19:07:36.306] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:07:36.306] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:07:36.386] Loaded PowerVR consumer services. [2025-09-23 19:07:36.539] Waiting data available... [2025-09-23 19:07:36.539] 512+0 records in [2025-09-23 19:07:36.539] 512+0 records out [2025-09-23 19:07:36.555] Starting syslogd/klogd: done [2025-09-23 19:07:36.571] DML Start [2025-09-23 19:07:36.763] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:07:37.003] DML res1: 0 [2025-09-23 19:07:37.355] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:07:37.355] Read Success [2025-09-23 19:07:37.371] Verifying certificate... [2025-09-23 19:07:37.595] Verified OK [2025-09-23 19:07:37.611] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:07:39.226] Verified OK [2025-09-23 19:07:39.226] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:07:39.881] Verified OK [2025-09-23 19:07:39.881] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:07:42.535] fs.protected_hardlinks = 1 [2025-09-23 19:07:42.551] fs.protected_symlinks = 1 [2025-09-23 19:07:42.551] kernel.modules_disabled = 1 [2025-09-23 19:07:42.743] [2025-09-23 19:07:42.743] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:07:44.101] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:07:51.766] SBL1:1210.0.1.0 [2025-09-23 19:07:51.814] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:07:53.381] SBL2:1210.0.1.0 [2025-09-23 19:07:53.429] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:07:53.525] j-A [2025-09-23 19:08:00.881] The R5 Autosar Classic is running [2025-09-23 19:08:00.881] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:08:00.902] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:08:01.510] INIT: version 2.96 booting [2025-09-23 19:08:01.622] INIT: Entering runlevel: 5 [2025-09-23 19:08:01.781] mtd32 attached [2025-09-23 19:08:01.781] mtd24 attached [2025-09-23 19:08:01.797] mtd28 attached [2025-09-23 19:08:01.845] RTNETLINK answers: File exists [2025-09-23 19:08:01.891] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:08:01.891] ubi1:textures is mounted. [2025-09-23 19:08:01.891] ubi0:dml_code is mounted. [2025-09-23 19:08:01.891] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:08:01.891] ubi2:animations is mounted. [2025-09-23 19:08:01.891] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:08:01.891] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:08:01.891] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:08:01.914] data.LB_FadeInType0=100 [2025-09-23 19:08:01.914] data.CHLH_FadeInType0=0 [2025-09-23 19:08:01.914] data.WU_FadeInDelay=0 [2025-09-23 19:08:01.914] max_time_out=0 [2025-09-23 19:08:01.914] No splash screen [2025-09-23 19:08:01.914] stop dss Done [2025-09-23 19:08:01.940] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:08:01.940] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:08:01.972] /dev/mem opened. [2025-09-23 19:08:02.004] Memory mapped at address 0xffffb90d3000. [2025-09-23 19:08:02.004] Read at address 0x00600018 (0xffffb90d3018): 0x00000000 [2025-09-23 19:08:02.004] Write at address 0x00600018 (0xffffb90d3018): 0x00400040, readback 0x00400040 [2025-09-23 19:08:02.099] Loaded PowerVR consumer services. [2025-09-23 19:08:02.227] 512+0 records in [2025-09-23 19:08:02.227] 512+0 records out [2025-09-23 19:08:02.244] Waiting data available... [2025-09-23 19:08:02.276] Starting syslogd/klogd: done [2025-09-23 19:08:02.292] DML Start [2025-09-23 19:08:02.484] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:08:02.691] DML res1: 0 [2025-09-23 19:08:03.134] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:08:03.134] Read Success [2025-09-23 19:08:03.134] Verifying certificate... [2025-09-23 19:08:03.358] Verified OK [2025-09-23 19:08:03.374] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:08:05.197] Verified OK [2025-09-23 19:08:05.197] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:08:05.740] Verified OK [2025-09-23 19:08:05.756] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:08:08.203] fs.protected_hardlinks = 1 [2025-09-23 19:08:08.234] fs.protected_symlinks = 1 [2025-09-23 19:08:08.234] kernel.modules_disabled = 1 [2025-09-23 19:08:08.426] [2025-09-23 19:08:08.426] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:08:09.768] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:08:17.485] SBL1:1210.0.1.0 [2025-09-23 19:08:17.533] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:08:19.100] SBL2:1210.0.1.0 [2025-09-23 19:08:19.148] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:08:19.244] j-A [2025-09-23 19:08:26.599] The R5 Autosar Classic is running [2025-09-23 19:08:26.621] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:08:26.621] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:08:27.228] INIT: version 2.96 booting [2025-09-23 19:08:27.340] INIT: Entering runlevel: 5 [2025-09-23 19:08:27.500] mtd32 attached [2025-09-23 19:08:27.516] mtd28 attached [2025-09-23 19:08:27.532] mtd24 attached [2025-09-23 19:08:27.532] ubi0:dml_code is mounted. [2025-09-23 19:08:27.564] RTNETLINK answers: File exists [2025-09-23 19:08:27.599] ubi1:animations is mounted. [2025-09-23 19:08:27.599] ubi2:textures is mounted. [2025-09-23 19:08:27.599] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:08:27.599] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:08:27.599] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:08:27.599] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:08:27.631] data.LB_FadeInType0=100 [2025-09-23 19:08:27.631] data.CHLH_FadeInType0=0 [2025-09-23 19:08:27.631] data.WU_FadeInDelay=0 [2025-09-23 19:08:27.631] max_time_out=0 [2025-09-23 19:08:27.631] No splash screen [2025-09-23 19:08:27.631] stop dss Done [2025-09-23 19:08:27.631] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:08:27.702] /dev/mem opened. [2025-09-23 19:08:27.702] Memory mapped at address 0xffffafa02000. [2025-09-23 19:08:27.702] Read at address 0x00600018 (0xffffafa02018): 0x00000000 [2025-09-23 19:08:27.702] Write at address 0x00600018 (0xffffafa02018): 0x00400040, readback 0x00400040 [2025-09-23 19:08:27.702] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:08:27.717] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:08:27.861] Loaded PowerVR consumer services. [2025-09-23 19:08:27.958] Waiting data available... [2025-09-23 19:08:27.974] 512+0 records in [2025-09-23 19:08:27.974] 512+0 records out [2025-09-23 19:08:27.990] Starting syslogd/klogd: done [2025-09-23 19:08:28.022] DML Start [2025-09-23 19:08:28.214] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:08:28.454] DML res1: 0 [2025-09-23 19:08:28.817] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:08:28.817] Read Success [2025-09-23 19:08:28.817] Verifying certificate... [2025-09-23 19:08:29.041] Verified OK [2025-09-23 19:08:29.058] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:08:30.826] Verified OK [2025-09-23 19:08:30.826] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:08:31.359] Verified OK [2025-09-23 19:08:31.359] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:08:33.918] fs.protected_hardlinks = 1 [2025-09-23 19:08:33.918] fs.protected_symlinks = 1 [2025-09-23 19:08:33.933] kernel.modules_disabled = 1 [2025-09-23 19:08:34.110] [2025-09-23 19:08:34.110] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:08:35.583] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:08:43.211] SBL1:1210.0.1.0 [2025-09-23 19:08:43.259] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:08:44.826] SBL2:1210.0.1.0 [2025-09-23 19:08:44.874] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 19:08:44.985] j-A [2025-09-23 19:08:52.324] The R5 Autosar Classic is running [2025-09-23 19:08:52.349] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:08:52.349] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:08:52.957] INIT: version 2.96 booting [2025-09-23 19:08:53.069] INIT: Entering runlevel: 5 [2025-09-23 19:08:53.229] mtd32 attached [2025-09-23 19:08:53.229] mtd24 attached [2025-09-23 19:08:53.245] mtd28 attached [2025-09-23 19:08:53.277] ubi0:dml_code is mounted. [2025-09-23 19:08:53.293] RTNETLINK answers: File exists [2025-09-23 19:08:53.293] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:08:53.331] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:08:53.331] ubi1:textures is mounted. [2025-09-23 19:08:53.331] ubi2:animations is mounted. [2025-09-23 19:08:53.331] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:08:53.331] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:08:53.331] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:08:53.353] data.LB_FadeInType0=100 [2025-09-23 19:08:53.353] data.CHLH_FadeInType0=0 [2025-09-23 19:08:53.353] data.WU_FadeInDelay=0 [2025-09-23 19:08:53.353] max_time_out=0 [2025-09-23 19:08:53.353] No splash screen [2025-09-23 19:08:53.353] stop dss Done [2025-09-23 19:08:53.440] /dev/mem opened. [2025-09-23 19:08:53.440] Memory mapped at address 0xffff85687000. [2025-09-23 19:08:53.440] Read at address 0x00600018 (0xffff85687018): 0x00000000 [2025-09-23 19:08:53.440] Write at address 0x00600018 (0xffff85687018): 0x00400040, readback 0x00400040 [2025-09-23 19:08:53.440] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:08:53.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:08:53.503] Loaded PowerVR consumer services. [2025-09-23 19:08:53.664] 512+0 records in [2025-09-23 19:08:53.664] 512+0 records out [2025-09-23 19:08:53.680] Waiting data available... [2025-09-23 19:08:53.712] Starting syslogd/klogd: done [2025-09-23 19:08:53.728] DML Start [2025-09-23 19:08:53.887] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:08:54.143] DML res1: 0 [2025-09-23 19:08:54.575] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:08:54.590] Read Success [2025-09-23 19:08:54.590] Verifying certificate... [2025-09-23 19:08:54.847] Verified OK [2025-09-23 19:08:54.863] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:08:56.501] Verified OK [2025-09-23 19:08:56.501] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:08:57.132] Verified OK [2025-09-23 19:08:57.132] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:08:59.915] fs.protected_hardlinks = 1 [2025-09-23 19:08:59.931] fs.protected_symlinks = 1 [2025-09-23 19:08:59.931] kernel.modules_disabled = 1 [2025-09-23 19:09:00.122] [2025-09-23 19:09:00.122] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:09:01.257] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:09:08.961] SBL1:1210.0.1.0 [2025-09-23 19:09:09.009] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:09:10.575] SBL2:1210.0.1.0 [2025-09-23 19:09:10.623] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:09:10.735] j-A [2025-09-23 19:09:18.074] The R5 Autosar Classic is running [2025-09-23 19:09:18.099] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:09:18.099] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:09:18.706] INIT: version 2.96 booting [2025-09-23 19:09:18.818] INIT: Entering runlevel: 5 [2025-09-23 19:09:18.978] mtd32 attached [2025-09-23 19:09:18.978] mtd24 attached [2025-09-23 19:09:18.994] mtd28 attached [2025-09-23 19:09:19.042] ubi0:dml_code is mounted. [2025-09-23 19:09:19.042] RTNETLINK answers: File exists [2025-09-23 19:09:19.058] ubi2:animations is mounted. [2025-09-23 19:09:19.058] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:09:19.084] ubi1:textures is mounted. [2025-09-23 19:09:19.084] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:09:19.084] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:09:19.084] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:09:19.084] data.LB_FadeInType0=100 [2025-09-23 19:09:19.110] data.CHLH_FadeInType0=0 [2025-09-23 19:09:19.110] data.WU_FadeInDelay=0 [2025-09-23 19:09:19.110] max_time_out=0 [2025-09-23 19:09:19.110] No splash screen [2025-09-23 19:09:19.110] stop dss Done [2025-09-23 19:09:19.110] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:09:19.142] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:09:19.179] /dev/mem opened. [2025-09-23 19:09:19.179] Memory mapped at address 0xffff92764000. [2025-09-23 19:09:19.179] Read at address 0x00600018 (0xffff92764018): 0x00000000 [2025-09-23 19:09:19.179] Write at address 0x00600018 (0xffff92764018): 0x00400040, readback 0x00400040 [2025-09-23 19:09:19.179] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:09:19.258] Loaded PowerVR consumer services. [2025-09-23 19:09:19.419] Waiting data available... [2025-09-23 19:09:19.435] 512+0 records in [2025-09-23 19:09:19.435] 512+0 records out [2025-09-23 19:09:19.450] Starting syslogd/klogd: done [2025-09-23 19:09:19.466] DML Start [2025-09-23 19:09:19.642] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:09:19.898] DML res1: 0 [2025-09-23 19:09:20.356] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:09:20.356] Read Success [2025-09-23 19:09:20.356] Verifying certificate... [2025-09-23 19:09:20.629] Verified OK [2025-09-23 19:09:20.661] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:09:22.415] Verified OK [2025-09-23 19:09:22.415] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:09:22.942] Verified OK [2025-09-23 19:09:22.958] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:09:25.421] fs.protected_hardlinks = 1 [2025-09-23 19:09:25.421] fs.protected_symlinks = 1 [2025-09-23 19:09:25.421] kernel.modules_disabled = 1 [2025-09-23 19:09:25.629] [2025-09-23 19:09:25.629] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:09:26.956] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:09:34.686] SBL1:1210.0.1.0 [2025-09-23 19:09:34.734] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:09:36.300] SBL2:1210.0.1.0 [2025-09-23 19:09:36.332] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:09:36.445] j-A [2025-09-23 19:09:43.798] The R5 Autosar Classic is running [2025-09-23 19:09:43.798] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:09:43.819] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:09:44.426] INIT: version 2.96 booting [2025-09-23 19:09:44.539] INIT: Entering runlevel: 5 [2025-09-23 19:09:44.698] mtd24 attached [2025-09-23 19:09:44.698] mtd28 attached [2025-09-23 19:09:44.730] mtd32 attached [2025-09-23 19:09:44.762] ubi0:textures is mounted. [2025-09-23 19:09:44.828] RTNETLINK answers: File exists [2025-09-23 19:09:44.828] ubi2:dml_code is mounted. [2025-09-23 19:09:44.828] ubi1:animations is mounted. [2025-09-23 19:09:44.828] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:09:44.828] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:09:44.828] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:09:44.828] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:09:44.828] data.LB_FadeInType0=100 [2025-09-23 19:09:44.828] data.CHLH_FadeInType0=0 [2025-09-23 19:09:44.828] data.WU_FadeInDelay=0 [2025-09-23 19:09:44.828] max_time_out=0 [2025-09-23 19:09:44.828] No splash screen [2025-09-23 19:09:44.828] stop dss Done [2025-09-23 19:09:44.828] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:09:44.876] /dev/mem opened. [2025-09-23 19:09:44.876] Memory mapped at address 0xffffa0b98000. [2025-09-23 19:09:44.902] Read at address 0x00600018 (0xffffa0b98018): 0x00000000 [2025-09-23 19:09:44.902] Write at address 0x00600018 (0xffffa0b98018): 0x00400040, readback 0x00400040 [2025-09-23 19:09:44.918] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:09:44.934] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:09:45.126] Loaded PowerVR consumer services. [2025-09-23 19:09:45.190] Waiting data available... [2025-09-23 19:09:45.190] 512+0 records in [2025-09-23 19:09:45.190] 512+0 records out [2025-09-23 19:09:45.238] Starting syslogd/klogd: done [2025-09-23 19:09:45.254] DML Start [2025-09-23 19:09:45.446] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:09:45.669] DML res1: 0 [2025-09-23 19:09:46.092] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:09:46.092] Read Success [2025-09-23 19:09:46.092] Verifying certificate... [2025-09-23 19:09:46.315] Verified OK [2025-09-23 19:09:46.331] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:09:47.945] Verified OK [2025-09-23 19:09:47.945] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:09:48.581] Verified OK [2025-09-23 19:09:48.581] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:09:51.281] fs.protected_hardlinks = 1 [2025-09-23 19:09:51.281] fs.protected_symlinks = 1 [2025-09-23 19:09:51.281] kernel.modules_disabled = 1 [2025-09-23 19:09:51.457] [2025-09-23 19:09:51.457] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:09:52.768] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:10:00.413] SBL1:1210.0.1.0 [2025-09-23 19:10:00.445] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:10:02.028] SBL2:1210.0.1.0 [2025-09-23 19:10:02.060] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:10:02.171] j-A [2025-09-23 19:10:09.541] The R5 Autosar Classic is running [2025-09-23 19:10:09.541] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:10:09.541] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:10:10.149] INIT: version 2.96 booting [2025-09-23 19:10:10.261] INIT: Entering runlevel: 5 [2025-09-23 19:10:10.421] mtd32 attached [2025-09-23 19:10:10.421] mtd24 attached [2025-09-23 19:10:10.437] mtd28 attached [2025-09-23 19:10:10.521] RTNETLINK answers: File exists [2025-09-23 19:10:10.521] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:10:10.521] ubi0:dml_code is mounted. [2025-09-23 19:10:10.521] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:10:10.521] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:10:10.521] ubi1:textures is mounted. [2025-09-23 19:10:10.521] ubi2:animations is mounted. [2025-09-23 19:10:10.521] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:10:10.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:10:10.549] data.LB_FadeInType0=100 [2025-09-23 19:10:10.549] data.CHLH_FadeInType0=0 [2025-09-23 19:10:10.549] data.WU_FadeInDelay=0 [2025-09-23 19:10:10.549] max_time_out=0 [2025-09-23 19:10:10.549] No splash screen [2025-09-23 19:10:10.549] stop dss Done [2025-09-23 19:10:10.565] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:10:10.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:10:10.635] /dev/mem opened. [2025-09-23 19:10:10.635] Memory mapped at address 0xffff8a0e9000. [2025-09-23 19:10:10.635] Read at address 0x00600018 (0xffff8a0e9018): 0x00000000 [2025-09-23 19:10:10.635] Write at address 0x00600018 (0xffff8a0e9018): 0x00400040, readback 0x00400040 [2025-09-23 19:10:10.732] Loaded PowerVR consumer services. [2025-09-23 19:10:10.859] 512+0 records in [2025-09-23 19:10:10.859] 512+0 records out [2025-09-23 19:10:10.875] Waiting data available... [2025-09-23 19:10:10.907] Starting syslogd/klogd: done [2025-09-23 19:10:10.923] DML Start [2025-09-23 19:10:11.116] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:10:11.339] DML res1: 0 [2025-09-23 19:10:11.802] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:10:11.802] Read Success [2025-09-23 19:10:11.802] Verifying certificate... [2025-09-23 19:10:12.042] Verified OK [2025-09-23 19:10:12.058] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:10:13.604] Verified OK [2025-09-23 19:10:13.604] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:10:14.314] Verified OK [2025-09-23 19:10:14.314] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:10:17.000] fs.protected_hardlinks = 1 [2025-09-23 19:10:17.000] fs.protected_symlinks = 1 [2025-09-23 19:10:17.016] kernel.modules_disabled = 1 [2025-09-23 19:10:17.192] [2025-09-23 19:10:17.192] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:10:18.423] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:10:26.149] SBL1:1210.0.1.0 [2025-09-23 19:10:26.181] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:10:27.764] SBL2:1210.0.1.0 [2025-09-23 19:10:27.796] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:10:27.908] j-A [2025-09-23 19:10:35.280] The R5 Autosar Classic is running [2025-09-23 19:10:35.280] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:10:35.280] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:10:35.888] INIT: version 2.96 booting [2025-09-23 19:10:36.000] INIT: Entering runlevel: 5 [2025-09-23 19:10:36.143] mtd24 attached [2025-09-23 19:10:36.159] mtd28 attached [2025-09-23 19:10:36.175] mtd32 attached [2025-09-23 19:10:36.223] ubi0:textures is mounted. [2025-09-23 19:10:36.223] ubi2:dml_code is mounted. [2025-09-23 19:10:36.288] RTNETLINK answers: File exists [2025-09-23 19:10:36.288] ubi1:animations is mounted. [2025-09-23 19:10:36.288] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:10:36.288] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:10:36.288] data.LB_FadeInType0=100 [2025-09-23 19:10:36.288] data.CHLH_FadeInType0=0 [2025-09-23 19:10:36.288] data.WU_FadeInDelay=0 [2025-09-23 19:10:36.288] max_time_out=0 [2025-09-23 19:10:36.288] No splash screen [2025-09-23 19:10:36.288] stop dss Done [2025-09-23 19:10:36.288] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:10:36.288] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:10:36.288] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:10:36.303] /dev/mem opened. [2025-09-23 19:10:36.330] Memory mapped at address 0xffff8ad16000. [2025-09-23 19:10:36.330] Read at address 0x00600018 (0xffff8ad16018): 0x00000000 [2025-09-23 19:10:36.330] Write at address 0x00600018 (0xffff8ad16018): 0x00400040, readback 0x00400040 [2025-09-23 19:10:36.357] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:10:36.357] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:10:36.581] Loaded PowerVR consumer services. [2025-09-23 19:10:36.629] Waiting data available... [2025-09-23 19:10:36.645] 512+0 records in [2025-09-23 19:10:36.645] 512+0 records out [2025-09-23 19:10:36.693] Starting syslogd/klogd: done [2025-09-23 19:10:36.709] DML Start [2025-09-23 19:10:36.901] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:10:37.093] DML res1: 0 [2025-09-23 19:10:37.508] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:10:37.529] Read Success [2025-09-23 19:10:37.529] Verifying certificate... [2025-09-23 19:10:37.753] Verified OK [2025-09-23 19:10:37.769] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:10:39.524] Verified OK [2025-09-23 19:10:39.524] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:10:40.112] Verified OK [2025-09-23 19:10:40.112] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:10:42.766] fs.protected_hardlinks = 1 [2025-09-23 19:10:42.782] fs.protected_symlinks = 1 [2025-09-23 19:10:42.782] kernel.modules_disabled = 1 [2025-09-23 19:10:42.990] [2025-09-23 19:10:42.990] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:10:44.202] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:10:51.866] SBL1:1210.0.1.0 [2025-09-23 19:10:51.898] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:10:53.480] SBL2:1210.0.1.0 [2025-09-23 19:10:53.513] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:10:53.625] j-A [2025-09-23 19:11:00.998] The R5 Autosar Classic is running [2025-09-23 19:11:00.998] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:11:00.998] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:11:01.605] INIT: version 2.96 booting [2025-09-23 19:11:01.717] INIT: Entering runlevel: 5 [2025-09-23 19:11:01.861] mtd24 attached [2025-09-23 19:11:01.877] mtd28 attached [2025-09-23 19:11:01.893] mtd32 attached [2025-09-23 19:11:01.941] RTNETLINK answers: File exists [2025-09-23 19:11:01.941] ubi1:animations is mounted. [2025-09-23 19:11:01.984] ubi0:textures is mounted. [2025-09-23 19:11:01.984] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:11:01.984] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:11:01.984] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:11:01.984] ubi2:dml_code is mounted. [2025-09-23 19:11:01.984] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:11:01.984] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:11:01.984] data.LB_FadeInType0=100 [2025-09-23 19:11:02.005] data.CHLH_FadeInType0=0 [2025-09-23 19:11:02.005] data.WU_FadeInDelay=0 [2025-09-23 19:11:02.005] max_time_out=0 [2025-09-23 19:11:02.005] No splash screen [2025-09-23 19:11:02.005] stop dss Done [2025-09-23 19:11:02.037] /dev/mem opened. [2025-09-23 19:11:02.037] Memory mapped at address 0xffff9b683000. [2025-09-23 19:11:02.077] Read at address 0x00600018 (0xffff9b683018): 0x00000000 [2025-09-23 19:11:02.077] Write at address 0x00600018 (0xffff9b683018): 0x00400040, readback 0x00400040 [2025-09-23 19:11:02.077] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:11:02.077] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:11:02.189] Loaded PowerVR consumer services. [2025-09-23 19:11:02.332] Waiting data available... [2025-09-23 19:11:02.332] 512+0 records in [2025-09-23 19:11:02.348] 512+0 records out [2025-09-23 19:11:02.380] Starting syslogd/klogd: done [2025-09-23 19:11:02.397] DML Start [2025-09-23 19:11:02.589] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:11:02.813] DML res1: 0 [2025-09-23 19:11:03.308] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:11:03.324] Read Success [2025-09-23 19:11:03.324] Verifying certificate... [2025-09-23 19:11:03.548] Verified OK [2025-09-23 19:11:03.579] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:11:05.226] Verified OK [2025-09-23 19:11:05.226] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:11:05.786] Verified OK [2025-09-23 19:11:05.786] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:11:08.328] fs.protected_hardlinks = 1 [2025-09-23 19:11:08.344] fs.protected_symlinks = 1 [2025-09-23 19:11:08.344] kernel.modules_disabled = 1 [2025-09-23 19:11:08.552] [2025-09-23 19:11:08.552] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:11:09.827] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:11:17.588] SBL1:1210.0.1.0 [2025-09-23 19:11:17.620] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:11:19.202] SBL2:1210.0.1.0 [2025-09-23 19:11:19.234] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:11:19.347] j-A [2025-09-23 19:11:26.722] The R5 Autosar Classic is running [2025-09-23 19:11:26.722] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:11:26.722] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:11:27.330] INIT: version 2.96 booting [2025-09-23 19:11:27.441] INIT: Entering runlevel: 5 [2025-09-23 19:11:27.586] mtd28 attached [2025-09-23 19:11:27.602] mtd24 attached [2025-09-23 19:11:27.617] mtd32 attached [2025-09-23 19:11:27.725] ubi0:animations is mounted. [2025-09-23 19:11:27.725] ubi1:textures is mounted. [2025-09-23 19:11:27.725] ubi2:dml_code is mounted. [2025-09-23 19:11:27.725] RTNETLINK answers: File exists [2025-09-23 19:11:27.725] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:11:27.725] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:11:27.725] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:11:27.725] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:11:27.725] data.LB_FadeInType0=100 [2025-09-23 19:11:27.725] data.CHLH_FadeInType0=0 [2025-09-23 19:11:27.725] data.WU_FadeInDelay=0 [2025-09-23 19:11:27.725] max_time_out=0 [2025-09-23 19:11:27.725] No splash screen [2025-09-23 19:11:27.725] stop dss Done [2025-09-23 19:11:27.725] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:11:27.772] /dev/mem opened. [2025-09-23 19:11:27.804] Memory mapped at address 0xffffa8b62000. [2025-09-23 19:11:27.804] Read at address 0x00600018 (0xffffa8b62018): 0x00000000 [2025-09-23 19:11:27.804] Write at address 0x00600018 (0xffffa8b62018): 0x00400040, readback 0x00400040 [2025-09-23 19:11:27.836] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:11:27.852] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:11:28.028] Loaded PowerVR consumer services. [2025-09-23 19:11:28.076] 512+0 records in [2025-09-23 19:11:28.076] 512+0 records out [2025-09-23 19:11:28.092] Waiting data available... [2025-09-23 19:11:28.108] Starting syslogd/klogd: done [2025-09-23 19:11:28.124] DML Start [2025-09-23 19:11:28.332] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:11:28.540] DML res1: 0 [2025-09-23 19:11:28.967] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:11:28.967] Read Success [2025-09-23 19:11:28.967] Verifying certificate... [2025-09-23 19:11:29.254] Verified OK [2025-09-23 19:11:29.270] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:11:30.869] Verified OK [2025-09-23 19:11:30.869] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:11:31.530] Verified OK [2025-09-23 19:11:31.530] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:11:34.168] fs.protected_hardlinks = 1 [2025-09-23 19:11:34.184] fs.protected_symlinks = 1 [2025-09-23 19:11:34.184] kernel.modules_disabled = 1 [2025-09-23 19:11:34.376] [2025-09-23 19:11:34.376] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:11:35.610] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:11:43.284] SBL1:1210.0.1.0 [2025-09-23 19:11:43.332] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:11:44.898] SBL2:1210.0.1.0 [2025-09-23 19:11:44.946] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:11:45.058] j-A [2025-09-23 19:11:52.398] The R5 Autosar Classic is running [2025-09-23 19:11:52.422] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:11:52.422] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:11:53.030] INIT: version 2.96 booting [2025-09-23 19:11:53.141] INIT: Entering runlevel: 5 [2025-09-23 19:11:53.302] mtd24 attached [2025-09-23 19:11:53.302] mtd28 attached [2025-09-23 19:11:53.318] mtd32 attached [2025-09-23 19:11:53.366] RTNETLINK answers: File exists [2025-09-23 19:11:53.366] ubi0:textures is mounted. [2025-09-23 19:11:53.406] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:11:53.406] ubi2:dml_code is mounted. [2025-09-23 19:11:53.406] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:11:53.406] ubi1:animations is mounted. [2025-09-23 19:11:53.406] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:11:53.406] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:11:53.406] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:11:53.429] data.LB_FadeInType0=100 [2025-09-23 19:11:53.429] data.CHLH_FadeInType0=0 [2025-09-23 19:11:53.429] data.WU_FadeInDelay=0 [2025-09-23 19:11:53.429] max_time_out=0 [2025-09-23 19:11:53.429] No splash screen [2025-09-23 19:11:53.430] stop dss Done [2025-09-23 19:11:53.461] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:11:53.512] /dev/mem opened. [2025-09-23 19:11:53.512] Memory mapped at address 0xffff93331000. [2025-09-23 19:11:53.512] Read at address 0x00600018 (0xffff93331018): 0x00000000 [2025-09-23 19:11:53.512] Write at address 0x00600018 (0xffff93331018): 0x00400040, readback 0x00400040 [2025-09-23 19:11:53.512] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:11:53.657] Loaded PowerVR consumer services. [2025-09-23 19:11:53.752] Waiting data available... [2025-09-23 19:11:53.768] 512+0 records in [2025-09-23 19:11:53.768] 512+0 records out [2025-09-23 19:11:53.800] Starting syslogd/klogd: done [2025-09-23 19:11:53.816] DML Start [2025-09-23 19:11:53.992] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:11:54.201] DML res1: 0 [2025-09-23 19:11:54.670] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:11:54.670] Read Success [2025-09-23 19:11:54.670] Verifying certificate... [2025-09-23 19:11:54.941] Verified OK [2025-09-23 19:11:54.958] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:11:56.588] Verified OK [2025-09-23 19:11:56.588] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:11:57.237] Verified OK [2025-09-23 19:11:57.237] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:11:59.922] fs.protected_hardlinks = 1 [2025-09-23 19:11:59.922] fs.protected_symlinks = 1 [2025-09-23 19:11:59.938] kernel.modules_disabled = 1 [2025-09-23 19:12:00.114] [2025-09-23 19:12:00.130] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:12:01.313] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:12:08.996] SBL1:1210.0.1.0 [2025-09-23 19:12:09.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:12:10.611] SBL2:1210.0.1.0 [2025-09-23 19:12:10.659] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:12:10.755] j-A [2025-09-23 19:12:18.112] The R5 Autosar Classic is running [2025-09-23 19:12:18.133] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:12:18.133] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:12:18.741] INIT: version 2.96 booting [2025-09-23 19:12:18.852] INIT: Entering runlevel: 5 [2025-09-23 19:12:19.013] mtd32 attached [2025-09-23 19:12:19.029] mtd28 attached [2025-09-23 19:12:19.029] mtd24 attached [2025-09-23 19:12:19.061] ubi0:dml_code is mounted. [2025-09-23 19:12:19.120] RTNETLINK answers: File exists [2025-09-23 19:12:19.120] ubi2:textures is mounted. [2025-09-23 19:12:19.120] ubi1:animations is mounted. [2025-09-23 19:12:19.120] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:12:19.120] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:12:19.120] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:12:19.120] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:12:19.146] data.LB_FadeInType0=100 [2025-09-23 19:12:19.146] data.CHLH_FadeInType0=0 [2025-09-23 19:12:19.146] data.WU_FadeInDelay=0 [2025-09-23 19:12:19.146] max_time_out=0 [2025-09-23 19:12:19.146] No splash screen [2025-09-23 19:12:19.146] stop dss Done [2025-09-23 19:12:19.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:12:19.178] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:12:19.212] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:12:19.212] /dev/mem opened. [2025-09-23 19:12:19.212] Memory mapped at address 0xffff9ec68000. [2025-09-23 19:12:19.212] Read at address 0x00600018 (0xffff9ec68018): 0x00000000 [2025-09-23 19:12:19.212] Write at address 0x00600018 (0xffff9ec68018): 0x00400040, readback 0x00400040 [2025-09-23 19:12:19.324] Loaded PowerVR consumer services. [2025-09-23 19:12:19.483] Waiting data available... [2025-09-23 19:12:19.483] 512+0 records in [2025-09-23 19:12:19.483] 512+0 records out [2025-09-23 19:12:19.498] Starting syslogd/klogd: done [2025-09-23 19:12:19.514] DML Start [2025-09-23 19:12:19.707] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:12:19.914] DML res1: 0 [2025-09-23 19:12:20.378] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:12:20.399] Read Success [2025-09-23 19:12:20.399] Verifying certificate... [2025-09-23 19:12:20.655] Verified OK [2025-09-23 19:12:20.655] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:12:22.334] Verified OK [2025-09-23 19:12:22.334] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:12:22.973] Verified OK [2025-09-23 19:12:22.973] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:12:25.660] fs.protected_hardlinks = 1 [2025-09-23 19:12:25.660] fs.protected_symlinks = 1 [2025-09-23 19:12:25.675] kernel.modules_disabled = 1 [2025-09-23 19:12:25.867] [2025-09-23 19:12:25.867] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:12:27.037] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:12:34.737] SBL1:1210.0.1.0 [2025-09-23 19:12:34.769] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:12:36.352] SBL2:1210.0.1.0 [2025-09-23 19:12:36.384] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:12:36.495] j-A [2025-09-23 19:12:43.867] The R5 Autosar Classic is running [2025-09-23 19:12:43.867] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:12:43.867] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:12:44.475] INIT: version 2.96 booting [2025-09-23 19:12:44.586] INIT: Entering runlevel: 5 [2025-09-23 19:12:44.747] mtd24 attached [2025-09-23 19:12:44.747] mtd28 attached [2025-09-23 19:12:44.763] mtd32 attached [2025-09-23 19:12:44.811] ubi0:textures is mounted. [2025-09-23 19:12:44.811] RTNETLINK answers: File exists [2025-09-23 19:12:44.851] ubi1:animations is mounted. [2025-09-23 19:12:44.851] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:12:44.851] ubi2:dml_code is mounted. [2025-09-23 19:12:44.851] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:12:44.851] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:12:44.851] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:12:44.851] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:12:44.874] data.LB_FadeInType0=100 [2025-09-23 19:12:44.874] data.CHLH_FadeInType0=0 [2025-09-23 19:12:44.874] data.WU_FadeInDelay=0 [2025-09-23 19:12:44.874] max_time_out=0 [2025-09-23 19:12:44.874] No splash screen [2025-09-23 19:12:44.874] stop dss Done [2025-09-23 19:12:44.963] /dev/mem opened. [2025-09-23 19:12:44.963] Memory mapped at address 0xffffa6fd4000. [2025-09-23 19:12:44.963] Read at address 0x00600018 (0xffffa6fd4018): 0x00000000 [2025-09-23 19:12:44.963] Write at address 0x00600018 (0xffffa6fd4018): 0x00400040, readback 0x00400040 [2025-09-23 19:12:44.963] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:12:44.963] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:12:45.059] Loaded PowerVR consumer services. [2025-09-23 19:12:45.187] 512+0 records in [2025-09-23 19:12:45.187] 512+0 records out [2025-09-23 19:12:45.219] Waiting data available... [2025-09-23 19:12:45.235] Starting syslogd/klogd: done [2025-09-23 19:12:45.251] DML Start [2025-09-23 19:12:45.411] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:12:45.635] DML res1: 0 [2025-09-23 19:12:46.125] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:12:46.125] Read Success [2025-09-23 19:12:46.125] Verifying certificate... [2025-09-23 19:12:46.365] Verified OK [2025-09-23 19:12:46.381] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:12:48.060] Verified OK [2025-09-23 19:12:48.060] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:12:48.710] Verified OK [2025-09-23 19:12:48.710] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:12:51.284] fs.protected_hardlinks = 1 [2025-09-23 19:12:51.301] fs.protected_symlinks = 1 [2025-09-23 19:12:51.301] kernel.modules_disabled = 1 [2025-09-23 19:12:51.492] [2025-09-23 19:12:51.492] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:12:52.715] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:13:00.458] SBL1:1210.0.1.0 [2025-09-23 19:13:00.506] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:13:02.073] SBL2:1210.0.1.0 [2025-09-23 19:13:02.121] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:13:02.216] j-A [2025-09-23 19:13:09.571] The R5 Autosar Classic is running [2025-09-23 19:13:09.594] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:13:09.594] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:13:10.202] INIT: version 2.96 booting [2025-09-23 19:13:10.314] INIT: Entering runlevel: 5 [2025-09-23 19:13:10.473] mtd28 attached [2025-09-23 19:13:10.473] mtd24 attached [2025-09-23 19:13:10.489] mtd32 attached [2025-09-23 19:13:10.538] ubi0:animations is mounted. [2025-09-23 19:13:10.610] RTNETLINK answers: File exists [2025-09-23 19:13:10.610] ubi1:textures is mounted. [2025-09-23 19:13:10.610] ubi2:dml_code is mounted. [2025-09-23 19:13:10.610] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:13:10.610] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:13:10.610] data.LB_FadeInType0=100 [2025-09-23 19:13:10.610] data.CHLH_FadeInType0=0 [2025-09-23 19:13:10.610] data.WU_FadeInDelay=0 [2025-09-23 19:13:10.610] max_time_out=0 [2025-09-23 19:13:10.610] No splash screen [2025-09-23 19:13:10.610] stop dss Done [2025-09-23 19:13:10.610] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:13:10.610] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:13:10.610] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:13:10.673] /dev/mem opened. [2025-09-23 19:13:10.673] Memory mapped at address 0xffff8f995000. [2025-09-23 19:13:10.673] Read at address 0x00600018 (0xffff8f995018): 0x00000000 [2025-09-23 19:13:10.673] Write at address 0x00600018 (0xffff8f995018): 0x00400040, readback 0x00400040 [2025-09-23 19:13:10.698] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:13:10.698] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:13:10.762] Loaded PowerVR consumer services. [2025-09-23 19:13:10.923] Waiting data available... [2025-09-23 19:13:10.938] 512+0 records in [2025-09-23 19:13:10.938] 512+0 records out [2025-09-23 19:13:10.954] Starting syslogd/klogd: done [2025-09-23 19:13:10.970] DML Start [2025-09-23 19:13:11.162] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:13:11.370] DML res1: 0 [2025-09-23 19:13:11.802] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:13:11.823] Read Success [2025-09-23 19:13:11.823] Verifying certificate... [2025-09-23 19:13:12.063] Verified OK [2025-09-23 19:13:12.079] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:13:13.781] Verified OK [2025-09-23 19:13:13.781] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:13:14.309] Verified OK [2025-09-23 19:13:14.325] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:13:16.980] fs.protected_hardlinks = 1 [2025-09-23 19:13:16.996] fs.protected_symlinks = 1 [2025-09-23 19:13:16.996] kernel.modules_disabled = 1 [2025-09-23 19:13:17.187] [2025-09-23 19:13:17.187] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:13:18.420] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:13:26.170] SBL1:1210.0.1.0 [2025-09-23 19:13:26.201] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:13:27.785] SBL2:1210.0.1.0 [2025-09-23 19:13:27.817] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:13:27.928] j-A [2025-09-23 19:13:35.303] The R5 Autosar Classic is running [2025-09-23 19:13:35.303] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:13:35.303] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:13:35.910] INIT: version 2.96 booting [2025-09-23 19:13:36.022] INIT: Entering runlevel: 5 [2025-09-23 19:13:36.183] mtd32 attached [2025-09-23 19:13:36.183] mtd24 attached [2025-09-23 19:13:36.198] mtd28 attached [2025-09-23 19:13:36.247] RTNETLINK answers: File exists [2025-09-23 19:13:36.291] ubi0:dml_code is mounted. [2025-09-23 19:13:36.291] ubi1:textures is mounted. [2025-09-23 19:13:36.291] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:13:36.291] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:13:36.291] ubi2:animations is mounted. [2025-09-23 19:13:36.291] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:13:36.291] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:13:36.291] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:13:36.291] data.LB_FadeInType0=100 [2025-09-23 19:13:36.312] data.CHLH_FadeInType0=0 [2025-09-23 19:13:36.312] data.WU_FadeInDelay=0 [2025-09-23 19:13:36.312] max_time_out=0 [2025-09-23 19:13:36.312] No splash screen [2025-09-23 19:13:36.312] stop dss Done [2025-09-23 19:13:36.402] /dev/mem opened. [2025-09-23 19:13:36.402] Memory mapped at address 0xffff9dfcf000. [2025-09-23 19:13:36.402] Read at address 0x00600018 (0xffff9dfcf018): 0x00000000 [2025-09-23 19:13:36.402] Write at address 0x00600018 (0xffff9dfcf018): 0x00400040, readback 0x00400040 [2025-09-23 19:13:36.402] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:13:36.402] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:13:36.594] Loaded PowerVR consumer services. [2025-09-23 19:13:36.658] 512+0 records in [2025-09-23 19:13:36.674] 512+0 records out [2025-09-23 19:13:36.674] Waiting data available... [2025-09-23 19:13:36.689] Starting syslogd/klogd: done [2025-09-23 19:13:36.706] DML Start [2025-09-23 19:13:36.866] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:13:37.090] DML res1: 0 [2025-09-23 19:13:37.593] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:13:37.593] Read Success [2025-09-23 19:13:37.593] Verifying certificate... [2025-09-23 19:13:37.834] Verified OK [2025-09-23 19:13:37.850] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:13:39.541] Verified OK [2025-09-23 19:13:39.541] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:13:40.142] Verified OK [2025-09-23 19:13:40.142] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:13:42.749] fs.protected_hardlinks = 1 [2025-09-23 19:13:42.764] fs.protected_symlinks = 1 [2025-09-23 19:13:42.764] kernel.modules_disabled = 1 [2025-09-23 19:13:42.972] [2025-09-23 19:13:42.972] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:13:44.194] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:13:51.912] SBL1:1210.0.1.0 [2025-09-23 19:13:51.944] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:13:53.527] SBL2:1210.0.1.0 [2025-09-23 19:13:53.558] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:13:53.670] j-A [2025-09-23 19:14:01.044] The R5 Autosar Classic is running [2025-09-23 19:14:01.044] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:14:01.044] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:14:01.652] INIT: version 2.96 booting [2025-09-23 19:14:01.748] INIT: Entering runlevel: 5 [2025-09-23 19:14:01.907] mtd24 attached [2025-09-23 19:14:01.923] mtd28 attached [2025-09-23 19:14:01.939] mtd32 attached [2025-09-23 19:14:02.042] ubi0:textures is mounted. [2025-09-23 19:14:02.042] ubi1:animations is mounted. [2025-09-23 19:14:02.042] RTNETLINK answers: File exists [2025-09-23 19:14:02.042] ubi2:dml_code is mounted. [2025-09-23 19:14:02.042] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:14:02.042] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:14:02.042] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:14:02.042] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:14:02.042] data.LB_FadeInType0=100 [2025-09-23 19:14:02.042] data.CHLH_FadeInType0=0 [2025-09-23 19:14:02.042] data.WU_FadeInDelay=0 [2025-09-23 19:14:02.042] max_time_out=0 [2025-09-23 19:14:02.042] No splash screen [2025-09-23 19:14:02.042] stop dss Done [2025-09-23 19:14:02.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:14:02.108] /dev/mem opened. [2025-09-23 19:14:02.108] Memory mapped at address 0xffffad9a3000. [2025-09-23 19:14:02.108] Read at address 0x00600018 (0xffffad9a3018): 0x00000000 [2025-09-23 19:14:02.108] Write at address 0x00600018 (0xffffad9a3018): 0x00400040, readback 0x00400040 [2025-09-23 19:14:02.108] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:14:02.139] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:14:02.235] Loaded PowerVR consumer services. [2025-09-23 19:14:02.393] Waiting data available... [2025-09-23 19:14:02.393] 512+0 records in [2025-09-23 19:14:02.393] 512+0 records out [2025-09-23 19:14:02.409] Starting syslogd/klogd: done [2025-09-23 19:14:02.425] DML Start [2025-09-23 19:14:02.649] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:14:02.856] DML res1: 0 [2025-09-23 19:14:03.240] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:14:03.256] Read Success [2025-09-23 19:14:03.256] Verifying certificate... [2025-09-23 19:14:03.528] Verified OK [2025-09-23 19:14:03.544] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:14:05.159] Verified OK [2025-09-23 19:14:05.159] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:14:05.837] Verified OK [2025-09-23 19:14:05.837] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:14:08.492] fs.protected_hardlinks = 1 [2025-09-23 19:14:08.508] fs.protected_symlinks = 1 [2025-09-23 19:14:08.524] kernel.modules_disabled = 1 [2025-09-23 19:14:08.716] [2025-09-23 19:14:08.716] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:14:09.927] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:14:17.635] SBL1:1210.0.1.0 [2025-09-23 19:14:17.667] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:14:19.250] SBL2:1210.0.1.0 [2025-09-23 19:14:19.282] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:14:19.394] j-A [2025-09-23 19:14:26.764] The R5 Autosar Classic is running [2025-09-23 19:14:26.764] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:14:26.764] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:14:27.371] INIT: version 2.96 booting [2025-09-23 19:14:27.484] INIT: Entering runlevel: 5 [2025-09-23 19:14:27.627] mtd24 attached [2025-09-23 19:14:27.643] mtd32 attached [2025-09-23 19:14:27.659] mtd28 attached [2025-09-23 19:14:27.675] ubi0:textures is mounted. [2025-09-23 19:14:27.760] ubi1:dml_code is mounted. [2025-09-23 19:14:27.760] RTNETLINK answers: File exists [2025-09-23 19:14:27.760] ubi2:animations is mounted. [2025-09-23 19:14:27.760] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:14:27.760] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:14:27.760] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:14:27.760] data.LB_FadeInType0=100 [2025-09-23 19:14:27.760] data.CHLH_FadeInType0=0 [2025-09-23 19:14:27.760] data.WU_FadeInDelay=0 [2025-09-23 19:14:27.760] max_time_out=0 [2025-09-23 19:14:27.760] No splash screen [2025-09-23 19:14:27.760] stop dss Done [2025-09-23 19:14:27.760] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:14:27.760] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:14:27.791] /dev/mem opened. [2025-09-23 19:14:27.823] Memory mapped at address 0xffffb0e9a000. [2025-09-23 19:14:27.823] Read at address 0x00600018 (0xffffb0e9a018): 0x00000000 [2025-09-23 19:14:27.823] Write at address 0x00600018 (0xffffb0e9a018): 0x00400040, readback 0x00400040 [2025-09-23 19:14:27.839] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:14:27.855] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:14:27.935] Loaded PowerVR consumer services. [2025-09-23 19:14:28.079] Waiting data available... [2025-09-23 19:14:28.095] 512+0 records in [2025-09-23 19:14:28.095] 512+0 records out [2025-09-23 19:14:28.143] Starting syslogd/klogd: done [2025-09-23 19:14:28.159] DML Start [2025-09-23 19:14:28.350] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:14:28.558] DML res1: 0 [2025-09-23 19:14:28.987] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:14:28.987] Read Success [2025-09-23 19:14:28.987] Verifying certificate... [2025-09-23 19:14:29.259] Verified OK [2025-09-23 19:14:29.275] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:14:31.012] Verified OK [2025-09-23 19:14:31.012] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:14:31.630] Verified OK [2025-09-23 19:14:31.630] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:14:34.219] fs.protected_hardlinks = 1 [2025-09-23 19:14:34.235] fs.protected_symlinks = 1 [2025-09-23 19:14:34.235] kernel.modules_disabled = 1 [2025-09-23 19:14:34.428] [2025-09-23 19:14:34.428] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:14:35.557] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:14:43.363] SBL1:1210.0.1.0 [2025-09-23 19:14:43.410] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:14:44.977] SBL2:1210.0.1.0 [2025-09-23 19:14:45.009] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:14:45.121] j-A [2025-09-23 19:14:52.476] The R5 Autosar Classic is running [2025-09-23 19:14:52.476] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:14:52.497] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:14:53.104] INIT: version 2.96 booting [2025-09-23 19:14:53.216] INIT: Entering runlevel: 5 [2025-09-23 19:14:53.360] mtd28 attached [2025-09-23 19:14:53.376] mtd32 attached [2025-09-23 19:14:53.376] mtd24 attached [2025-09-23 19:14:53.439] RTNETLINK answers: File exists [2025-09-23 19:14:53.439] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:14:53.498] ubi0:animations is mounted. [2025-09-23 19:14:53.498] ubi1:dml_code is mounted. [2025-09-23 19:14:53.498] ubi2:textures is mounted. [2025-09-23 19:14:53.498] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:14:53.498] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:14:53.498] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:14:53.498] data.LB_FadeInType0=100 [2025-09-23 19:14:53.498] data.CHLH_FadeInType0=0 [2025-09-23 19:14:53.498] data.WU_FadeInDelay=0 [2025-09-23 19:14:53.498] max_time_out=0 [2025-09-23 19:14:53.498] No splash screen [2025-09-23 19:14:53.498] stop dss Done [2025-09-23 19:14:53.498] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:14:53.579] /dev/mem opened. [2025-09-23 19:14:53.579] Memory mapped at address 0xffffa3ee2000. [2025-09-23 19:14:53.579] Read at address 0x00600018 (0xffffa3ee2018): 0x00000000 [2025-09-23 19:14:53.579] Write at address 0x00600018 (0xffffa3ee2018): 0x00400040, readback 0x00400040 [2025-09-23 19:14:53.579] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:14:53.595] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:14:53.690] Loaded PowerVR consumer services. [2025-09-23 19:14:53.819] Waiting data available... [2025-09-23 19:14:53.845] 512+0 records in [2025-09-23 19:14:53.845] 512+0 records out [2025-09-23 19:14:53.876] Starting syslogd/klogd: done [2025-09-23 19:14:53.892] DML Start [2025-09-23 19:14:54.069] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:14:54.292] DML res1: 0 [2025-09-23 19:14:54.719] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:14:54.719] Read Success [2025-09-23 19:14:54.719] Verifying certificate... [2025-09-23 19:14:54.958] Verified OK [2025-09-23 19:14:54.974] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:14:56.509] Verified OK [2025-09-23 19:14:56.509] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:14:57.091] Verified OK [2025-09-23 19:14:57.091] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:14:59.968] fs.protected_hardlinks = 1 [2025-09-23 19:14:59.984] fs.protected_symlinks = 1 [2025-09-23 19:14:59.984] kernel.modules_disabled = 1 [2025-09-23 19:15:00.177] [2025-09-23 19:15:00.177] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:15:01.387] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:15:09.090] SBL1:1210.0.1.0 [2025-09-23 19:15:09.138] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:15:10.705] SBL2:1210.0.1.0 [2025-09-23 19:15:10.737] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:15:10.849] j-A [2025-09-23 19:15:18.203] The R5 Autosar Classic is running [2025-09-23 19:15:18.203] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:15:18.223] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:15:18.831] INIT: version 2.96 booting [2025-09-23 19:15:18.943] INIT: Entering runlevel: 5 [2025-09-23 19:15:19.087] mtd28 attached [2025-09-23 19:15:19.103] mtd32 attached [2025-09-23 19:15:19.119] mtd24 attached [2025-09-23 19:15:19.151] ubi0:animations is mounted. [2025-09-23 19:15:19.167] RTNETLINK answers: File exists [2025-09-23 19:15:19.167] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:15:19.219] ubi2:textures is mounted. [2025-09-23 19:15:19.219] ubi1:dml_code is mounted. [2025-09-23 19:15:19.219] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:15:19.219] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:15:19.219] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:15:19.219] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:15:19.219] data.LB_FadeInType0=100 [2025-09-23 19:15:19.219] data.CHLH_FadeInType0=0 [2025-09-23 19:15:19.219] data.WU_FadeInDelay=0 [2025-09-23 19:15:19.219] max_time_out=0 [2025-09-23 19:15:19.219] No splash screen [2025-09-23 19:15:19.219] stop dss Done [2025-09-23 19:15:19.251] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:15:19.276] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:15:19.310] /dev/mem opened. [2025-09-23 19:15:19.310] Memory mapped at address 0xffffaf0e0000. [2025-09-23 19:15:19.310] Read at address 0x00600018 (0xffffaf0e0018): 0x00000000 [2025-09-23 19:15:19.310] Write at address 0x00600018 (0xffffaf0e0018): 0x00400040, readback 0x00400040 [2025-09-23 19:15:19.391] Loaded PowerVR consumer services. [2025-09-23 19:15:19.551] Waiting data available... [2025-09-23 19:15:19.551] 512+0 records in [2025-09-23 19:15:19.567] 512+0 records out [2025-09-23 19:15:19.598] Starting syslogd/klogd: done [2025-09-23 19:15:19.614] DML Start [2025-09-23 19:15:19.806] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:15:20.046] DML res1: 0 [2025-09-23 19:15:20.412] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:15:20.412] Read Success [2025-09-23 19:15:20.412] Verifying certificate... [2025-09-23 19:15:20.619] Verified OK [2025-09-23 19:15:20.636] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:15:22.186] Verified OK [2025-09-23 19:15:22.202] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:15:22.810] Verified OK [2025-09-23 19:15:22.810] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:15:25.543] fs.protected_hardlinks = 1 [2025-09-23 19:15:25.559] fs.protected_symlinks = 1 [2025-09-23 19:15:25.559] kernel.modules_disabled = 1 [2025-09-23 19:15:25.767] [2025-09-23 19:15:25.767] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:15:27.142] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:15:34.806] SBL1:1210.0.1.0 [2025-09-23 19:15:34.838] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:15:36.420] SBL2:1210.0.1.0 [2025-09-23 19:15:36.452] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:15:36.564] j-A [2025-09-23 19:15:43.936] The R5 Autosar Classic is running [2025-09-23 19:15:43.936] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:15:43.936] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:15:44.542] INIT: version 2.96 booting [2025-09-23 19:15:44.655] INIT: Entering runlevel: 5 [2025-09-23 19:15:44.798] mtd24 attached [2025-09-23 19:15:44.814] mtd28 attached [2025-09-23 19:15:44.846] mtd32 attached [2025-09-23 19:15:44.934] RTNETLINK answers: File exists [2025-09-23 19:15:44.934] ubi0:textures is mounted. [2025-09-23 19:15:44.934] ubi1:animations is mounted. [2025-09-23 19:15:44.934] ubi2:dml_code is mounted. [2025-09-23 19:15:44.934] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:15:44.934] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:15:44.934] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:15:44.934] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:15:44.934] data.LB_FadeInType0=100 [2025-09-23 19:15:44.934] data.CHLH_FadeInType0=0 [2025-09-23 19:15:44.934] data.WU_FadeInDelay=0 [2025-09-23 19:15:44.934] max_time_out=0 [2025-09-23 19:15:44.934] No splash screen [2025-09-23 19:15:44.934] stop dss Done [2025-09-23 19:15:44.934] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:15:44.982] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:15:45.016] /dev/mem opened. [2025-09-23 19:15:45.016] Memory mapped at address 0xffff93620000. [2025-09-23 19:15:45.016] Read at address 0x00600018 (0xffff93620018): 0x00000000 [2025-09-23 19:15:45.016] Write at address 0x00600018 (0xffff93620018): 0x00400040, readback 0x00400040 [2025-09-23 19:15:45.016] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:15:45.255] Loaded PowerVR consumer services. [2025-09-23 19:15:45.287] Waiting data available... [2025-09-23 19:15:45.304] 512+0 records in [2025-09-23 19:15:45.304] 512+0 records out [2025-09-23 19:15:45.336] Starting syslogd/klogd: done [2025-09-23 19:15:45.352] DML Start [2025-09-23 19:15:45.495] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:15:45.751] DML res1: 0 [2025-09-23 19:15:46.167] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:15:46.188] Read Success [2025-09-23 19:15:46.188] Verifying certificate... [2025-09-23 19:15:46.428] Verified OK [2025-09-23 19:15:46.444] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:15:48.058] Verified OK [2025-09-23 19:15:48.058] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:15:48.738] Verified OK [2025-09-23 19:15:48.738] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:15:51.376] fs.protected_hardlinks = 1 [2025-09-23 19:15:51.392] fs.protected_symlinks = 1 [2025-09-23 19:15:51.392] kernel.modules_disabled = 1 [2025-09-23 19:15:51.600] [2025-09-23 19:15:51.600] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:15:52.795] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:16:00.502] SBL1:1210.0.1.0 [2025-09-23 19:16:00.550] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:16:02.118] SBL2:1210.0.1.0 [2025-09-23 19:16:02.165] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:16:02.261] j-A [2025-09-23 19:16:09.617] The R5 Autosar Classic is running [2025-09-23 19:16:09.639] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:16:09.639] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:16:10.246] INIT: version 2.96 booting [2025-09-23 19:16:10.358] INIT: Entering runlevel: 5 [2025-09-23 19:16:10.518] mtd28 attached [2025-09-23 19:16:10.534] mtd32 attached [2025-09-23 19:16:10.550] mtd24 attached [2025-09-23 19:16:10.566] ubi0:animations is mounted. [2025-09-23 19:16:10.582] ubi1:dml_code is mounted. [2025-09-23 19:16:10.648] RTNETLINK answers: File exists [2025-09-23 19:16:10.648] ubi2:textures is mounted. [2025-09-23 19:16:10.648] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:16:10.648] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:16:10.648] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:16:10.648] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:16:10.648] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:16:10.648] data.LB_FadeInType0=100 [2025-09-23 19:16:10.648] data.CHLH_FadeInType0=0 [2025-09-23 19:16:10.648] data.WU_FadeInDelay=0 [2025-09-23 19:16:10.648] max_time_out=0 [2025-09-23 19:16:10.648] No splash screen [2025-09-23 19:16:10.648] stop dss Done [2025-09-23 19:16:10.715] /dev/mem opened. [2025-09-23 19:16:10.715] Memory mapped at address 0xffffbf180000. [2025-09-23 19:16:10.715] Read at address 0x00600018 (0xffffbf180018): 0x00000000 [2025-09-23 19:16:10.715] Write at address 0x00600018 (0xffffbf180018): 0x00400040, readback 0x00400040 [2025-09-23 19:16:10.730] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:16:10.730] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:16:10.859] Loaded PowerVR consumer services. [2025-09-23 19:16:10.971] Waiting data available... [2025-09-23 19:16:10.987] 512+0 records in [2025-09-23 19:16:10.987] 512+0 records out [2025-09-23 19:16:11.003] Starting syslogd/klogd: done [2025-09-23 19:16:11.035] DML Start [2025-09-23 19:16:11.179] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:16:11.371] DML res1: 0 [2025-09-23 19:16:11.955] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:16:11.955] Read Success [2025-09-23 19:16:11.955] Verifying certificate... [2025-09-23 19:16:12.179] Verified OK [2025-09-23 19:16:12.195] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:16:13.823] Verified OK [2025-09-23 19:16:13.823] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:16:14.424] Verified OK [2025-09-23 19:16:14.424] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:16:17.062] fs.protected_hardlinks = 1 [2025-09-23 19:16:17.062] fs.protected_symlinks = 1 [2025-09-23 19:16:17.078] kernel.modules_disabled = 1 [2025-09-23 19:16:17.269] [2025-09-23 19:16:17.269] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:16:18.538] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:16:26.229] SBL1:1210.0.1.0 [2025-09-23 19:16:26.261] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:16:27.844] SBL2:1210.0.1.0 [2025-09-23 19:16:27.876] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:16:27.988] j-A [2025-09-23 19:16:35.362] The R5 Autosar Classic is running [2025-09-23 19:16:35.362] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:16:35.362] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:16:35.970] INIT: version 2.96 booting [2025-09-23 19:16:36.082] INIT: Entering runlevel: 5 [2025-09-23 19:16:36.241] mtd24 attached [2025-09-23 19:16:36.241] mtd28 attached [2025-09-23 19:16:36.257] mtd32 attached [2025-09-23 19:16:36.306] RTNETLINK answers: File exists [2025-09-23 19:16:36.373] ubi0:textures is mounted. [2025-09-23 19:16:36.373] ubi1:animations is mounted. [2025-09-23 19:16:36.373] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:16:36.373] ubi2:dml_code is mounted. [2025-09-23 19:16:36.373] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:16:36.373] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:16:36.373] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:16:36.373] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:16:36.373] data.LB_FadeInType0=100 [2025-09-23 19:16:36.373] data.CHLH_FadeInType0=0 [2025-09-23 19:16:36.373] data.WU_FadeInDelay=0 [2025-09-23 19:16:36.373] max_time_out=0 [2025-09-23 19:16:36.373] No splash screen [2025-09-23 19:16:36.373] stop dss Done [2025-09-23 19:16:36.417] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:16:36.417] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:16:36.417] /dev/mem opened. [2025-09-23 19:16:36.417] Memory mapped at address 0xffff812b9000. [2025-09-23 19:16:36.443] Read at address 0x00600018 (0xffff812b9018): 0x00000000 [2025-09-23 19:16:36.443] Write at address 0x00600018 (0xffff812b9018): 0x00400040, readback 0x00400040 [2025-09-23 19:16:36.555] Loaded PowerVR consumer services. [2025-09-23 19:16:36.711] Waiting data available... [2025-09-23 19:16:36.711] 512+0 records in [2025-09-23 19:16:36.711] 512+0 records out [2025-09-23 19:16:36.726] Starting syslogd/klogd: done [2025-09-23 19:16:36.743] DML Start [2025-09-23 19:16:36.950] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:16:37.190] DML res1: 0 [2025-09-23 19:16:37.574] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:16:37.594] Read Success [2025-09-23 19:16:37.594] Verifying certificate... [2025-09-23 19:16:37.835] Verified OK [2025-09-23 19:16:37.850] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:16:39.486] Verified OK [2025-09-23 19:16:39.486] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:16:40.093] Verified OK [2025-09-23 19:16:40.093] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:16:42.888] fs.protected_hardlinks = 1 [2025-09-23 19:16:42.888] fs.protected_symlinks = 1 [2025-09-23 19:16:42.888] kernel.modules_disabled = 1 [2025-09-23 19:16:43.080] [2025-09-23 19:16:43.080] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:16:44.226] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:16:51.944] SBL1:1210.0.1.0 [2025-09-23 19:16:51.992] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:16:53.559] SBL2:1210.0.1.0 [2025-09-23 19:16:53.607] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:16:53.719] j-A [2025-09-23 19:17:01.058] The R5 Autosar Classic is running [2025-09-23 19:17:01.082] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:17:01.082] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:17:01.690] INIT: version 2.96 booting [2025-09-23 19:17:01.802] INIT: Entering runlevel: 5 [2025-09-23 19:17:01.962] mtd24 attached [2025-09-23 19:17:01.978] mtd32 attached [2025-09-23 19:17:01.978] mtd28 attached [2025-09-23 19:17:02.026] ubi0:textures is mounted. [2025-09-23 19:17:02.042] RTNETLINK answers: File exists [2025-09-23 19:17:02.042] ubi1:dml_code is mounted. [2025-09-23 19:17:02.068] ubi2:animations is mounted. [2025-09-23 19:17:02.068] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:17:02.068] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:17:02.068] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:17:02.100] data.LB_FadeInType0=100 [2025-09-23 19:17:02.100] data.CHLH_FadeInType0=0 [2025-09-23 19:17:02.100] data.WU_FadeInDelay=0 [2025-09-23 19:17:02.100] max_time_out=0 [2025-09-23 19:17:02.100] No splash screen [2025-09-23 19:17:02.100] stop dss Done [2025-09-23 19:17:02.100] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:17:02.100] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:17:02.165] /dev/mem opened. [2025-09-23 19:17:02.165] Memory mapped at address 0xffffa7672000. [2025-09-23 19:17:02.165] Read at address 0x00600018 (0xffffa7672018): 0x00000000 [2025-09-23 19:17:02.165] Write at address 0x00600018 (0xffffa7672018): 0x00400040, readback 0x00400040 [2025-09-23 19:17:02.197] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:17:02.213] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:17:02.308] Loaded PowerVR consumer services. [2025-09-23 19:17:02.436] Waiting data available... [2025-09-23 19:17:02.453] 512+0 records in [2025-09-23 19:17:02.453] 512+0 records out [2025-09-23 19:17:02.500] Starting syslogd/klogd: done [2025-09-23 19:17:02.516] DML Start [2025-09-23 19:17:02.660] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:17:02.884] DML res1: 0 [2025-09-23 19:17:03.389] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:17:03.389] Read Success [2025-09-23 19:17:03.389] Verifying certificate... [2025-09-23 19:17:03.660] Verified OK [2025-09-23 19:17:03.692] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:17:05.190] Verified OK [2025-09-23 19:17:05.190] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:17:05.718] Verified OK [2025-09-23 19:17:05.733] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:17:08.628] fs.protected_hardlinks = 1 [2025-09-23 19:17:08.628] fs.protected_symlinks = 1 [2025-09-23 19:17:08.644] kernel.modules_disabled = 1 [2025-09-23 19:17:08.819] [2025-09-23 19:17:08.819] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:17:09.997] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:17:17.676] SBL1:1210.0.1.0 [2025-09-23 19:17:17.708] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:17:19.291] SBL2:1210.0.1.0 [2025-09-23 19:17:19.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:17:19.435] j-A [2025-09-23 19:17:26.789] The R5 Autosar Classic is running [2025-09-23 19:17:26.789] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:17:26.811] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:17:27.418] INIT: version 2.96 booting [2025-09-23 19:17:27.530] INIT: Entering runlevel: 5 [2025-09-23 19:17:27.690] mtd28 attached [2025-09-23 19:17:27.690] mtd24 attached [2025-09-23 19:17:27.706] mtd32 attached [2025-09-23 19:17:27.738] ubi0:animations is mounted. [2025-09-23 19:17:27.754] RTNETLINK answers: File exists [2025-09-23 19:17:27.821] ubi1:textures is mounted. [2025-09-23 19:17:27.821] ubi2:dml_code is mounted. [2025-09-23 19:17:27.821] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:17:27.821] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:17:27.821] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:17:27.821] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:17:27.821] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:17:27.821] data.LB_FadeInType0=100 [2025-09-23 19:17:27.821] data.CHLH_FadeInType0=0 [2025-09-23 19:17:27.821] data.WU_FadeInDelay=0 [2025-09-23 19:17:27.821] max_time_out=0 [2025-09-23 19:17:27.821] No splash screen [2025-09-23 19:17:27.821] stop dss Done [2025-09-23 19:17:27.898] /dev/mem opened. [2025-09-23 19:17:27.898] Memory mapped at address 0xffffb2d41000. [2025-09-23 19:17:27.898] Read at address 0x00600018 (0xffffb2d41018): 0x00000000 [2025-09-23 19:17:27.898] Write at address 0x00600018 (0xffffb2d41018): 0x00400040, readback 0x00400040 [2025-09-23 19:17:27.898] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:17:27.898] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:17:28.010] Loaded PowerVR consumer services. [2025-09-23 19:17:28.138] Waiting data available... [2025-09-23 19:17:28.154] 512+0 records in [2025-09-23 19:17:28.154] 512+0 records out [2025-09-23 19:17:28.202] Starting syslogd/klogd: done [2025-09-23 19:17:28.218] DML Start [2025-09-23 19:17:28.410] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:17:28.634] DML res1: 0 [2025-09-23 19:17:29.059] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:17:29.059] Read Success [2025-09-23 19:17:29.059] Verifying certificate... [2025-09-23 19:17:29.298] Verified OK [2025-09-23 19:17:29.298] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:17:31.104] Verified OK [2025-09-23 19:17:31.104] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:17:31.735] Verified OK [2025-09-23 19:17:31.735] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:17:34.213] fs.protected_hardlinks = 1 [2025-09-23 19:17:34.213] fs.protected_symlinks = 1 [2025-09-23 19:17:34.229] kernel.modules_disabled = 1 [2025-09-23 19:17:34.421] [2025-09-23 19:17:34.421] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:17:35.694] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:17:43.401] SBL1:1210.0.1.0 [2025-09-23 19:17:43.433] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:17:45.016] SBL2:1210.0.1.0 [2025-09-23 19:17:45.048] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:17:45.159] j-A [2025-09-23 19:17:52.530] The R5 Autosar Classic is running [2025-09-23 19:17:52.530] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:17:52.530] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:17:53.138] INIT: version 2.96 booting [2025-09-23 19:17:53.249] INIT: Entering runlevel: 5 [2025-09-23 19:17:53.410] mtd24 attached [2025-09-23 19:17:53.410] mtd28 attached [2025-09-23 19:17:53.425] mtd32 attached [2025-09-23 19:17:53.457] ubi0:textures is mounted. [2025-09-23 19:17:53.473] RTNETLINK answers: File exists [2025-09-23 19:17:53.546] ubi1:animations is mounted. [2025-09-23 19:17:53.546] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:17:53.546] ubi2:dml_code is mounted. [2025-09-23 19:17:53.546] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:17:53.546] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:17:53.546] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:17:53.546] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:17:53.546] data.LB_FadeInType0=100 [2025-09-23 19:17:53.546] data.CHLH_FadeInType0=0 [2025-09-23 19:17:53.546] data.WU_FadeInDelay=0 [2025-09-23 19:17:53.546] max_time_out=0 [2025-09-23 19:17:53.546] No splash screen [2025-09-23 19:17:53.546] stop dss Done [2025-09-23 19:17:53.625] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:17:53.625] /dev/mem opened. [2025-09-23 19:17:53.625] Memory mapped at address 0xffffb68c5000. [2025-09-23 19:17:53.625] Read at address 0x00600018 (0xffffb68c5018): 0x00000000 [2025-09-23 19:17:53.625] Write at address 0x00600018 (0xffffb68c5018): 0x00400040, readback 0x00400040 [2025-09-23 19:17:53.625] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:17:53.849] Loaded PowerVR consumer services. [2025-09-23 19:17:53.897] Waiting data available... [2025-09-23 19:17:53.913] 512+0 records in [2025-09-23 19:17:53.913] 512+0 records out [2025-09-23 19:17:53.929] Starting syslogd/klogd: done [2025-09-23 19:17:53.945] DML Start [2025-09-23 19:17:54.121] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:17:54.361] DML res1: 0 [2025-09-23 19:17:54.776] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:17:54.798] Read Success [2025-09-23 19:17:54.798] Verifying certificate... [2025-09-23 19:17:55.021] Verified OK [2025-09-23 19:17:55.037] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:17:56.668] Verified OK [2025-09-23 19:17:56.668] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:17:57.324] Verified OK [2025-09-23 19:17:57.340] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:18:00.027] fs.protected_hardlinks = 1 [2025-09-23 19:18:00.027] fs.protected_symlinks = 1 [2025-09-23 19:18:00.043] kernel.modules_disabled = 1 [2025-09-23 19:18:00.251] [2025-09-23 19:18:00.251] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:18:01.389] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:18:09.119] SBL1:1210.0.1.0 [2025-09-23 19:18:09.151] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:18:10.734] SBL2:1210.0.1.0 [2025-09-23 19:18:10.766] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:18:10.877] j-A [2025-09-23 19:18:18.248] The R5 Autosar Classic is running [2025-09-23 19:18:18.248] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:18:18.248] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:18:18.855] INIT: version 2.96 booting [2025-09-23 19:18:18.967] INIT: Entering runlevel: 5 [2025-09-23 19:18:19.110] mtd24 attached [2025-09-23 19:18:19.127] mtd32 attached [2025-09-23 19:18:19.127] mtd28 attached [2025-09-23 19:18:19.226] RTNETLINK answers: File exists [2025-09-23 19:18:19.226] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:18:19.226] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:18:19.226] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:18:19.226] ubi0:textures is mounted. [2025-09-23 19:18:19.226] ubi2:animations is mounted. [2025-09-23 19:18:19.226] ubi1:dml_code is mounted. [2025-09-23 19:18:19.226] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:18:19.226] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:18:19.253] data.LB_FadeInType0=100 [2025-09-23 19:18:19.253] data.CHLH_FadeInType0=0 [2025-09-23 19:18:19.253] data.WU_FadeInDelay=0 [2025-09-23 19:18:19.253] max_time_out=0 [2025-09-23 19:18:19.253] No splash screen [2025-09-23 19:18:19.253] stop dss Done [2025-09-23 19:18:19.269] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:18:19.285] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:18:19.301] /dev/mem opened. [2025-09-23 19:18:19.301] Memory mapped at address 0xffff8a359000. [2025-09-23 19:18:19.327] Read at address 0x00600018 (0xffff8a359018): 0x00000000 [2025-09-23 19:18:19.327] Write at address 0x00600018 (0xffff8a359018): 0x00400040, readback 0x00400040 [2025-09-23 19:18:19.503] Loaded PowerVR consumer services. [2025-09-23 19:18:19.598] Waiting data available... [2025-09-23 19:18:19.614] 512+0 records in [2025-09-23 19:18:19.614] 512+0 records out [2025-09-23 19:18:19.662] Starting syslogd/klogd: done [2025-09-23 19:18:19.678] DML Start [2025-09-23 19:18:19.855] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:18:20.047] DML res1: 0 [2025-09-23 19:18:20.478] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:18:20.494] Read Success [2025-09-23 19:18:20.494] Verifying certificate... [2025-09-23 19:18:20.781] Verified OK [2025-09-23 19:18:20.797] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:18:22.461] Verified OK [2025-09-23 19:18:22.461] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:18:23.042] Verified OK [2025-09-23 19:18:23.042] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:18:25.713] fs.protected_hardlinks = 1 [2025-09-23 19:18:25.728] fs.protected_symlinks = 1 [2025-09-23 19:18:25.728] kernel.modules_disabled = 1 [2025-09-23 19:18:25.920] [2025-09-23 19:18:25.920] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:18:27.092] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:18:34.832] SBL1:1210.0.1.0 [2025-09-23 19:18:34.879] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:18:36.446] SBL2:1210.0.1.0 [2025-09-23 19:18:36.494] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:18:36.590] j-A [2025-09-23 19:18:43.944] The R5 Autosar Classic is running [2025-09-23 19:18:43.944] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:18:43.965] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:18:44.573] INIT: version 2.96 booting [2025-09-23 19:18:44.685] INIT: Entering runlevel: 5 [2025-09-23 19:18:44.844] mtd24 attached [2025-09-23 19:18:44.844] mtd32 attached [2025-09-23 19:18:44.860] mtd28 attached [2025-09-23 19:18:44.909] RTNETLINK answers: File exists [2025-09-23 19:18:44.909] ubi0:textures is mounted. [2025-09-23 19:18:44.948] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:18:44.948] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:18:44.948] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:18:44.948] ubi2:animations is mounted. [2025-09-23 19:18:44.948] ubi1:dml_code is mounted. [2025-09-23 19:18:44.948] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:18:44.948] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:18:44.969] data.LB_FadeInType0=100 [2025-09-23 19:18:44.969] data.CHLH_FadeInType0=0 [2025-09-23 19:18:44.969] data.WU_FadeInDelay=0 [2025-09-23 19:18:44.969] max_time_out=0 [2025-09-23 19:18:44.969] No splash screen [2025-09-23 19:18:44.969] stop dss Done [2025-09-23 19:18:45.016] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:18:45.016] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:18:45.052] /dev/mem opened. [2025-09-23 19:18:45.052] Memory mapped at address 0xffffa13a1000. [2025-09-23 19:18:45.052] Read at address 0x00600018 (0xffffa13a1018): 0x00000000 [2025-09-23 19:18:45.052] Write at address 0x00600018 (0xffffa13a1018): 0x00400040, readback 0x00400040 [2025-09-23 19:18:45.229] Loaded PowerVR consumer services. [2025-09-23 19:18:45.333] Waiting data available... [2025-09-23 19:18:45.333] 512+0 records in [2025-09-23 19:18:45.333] 512+0 records out [2025-09-23 19:18:45.349] Starting syslogd/klogd: done [2025-09-23 19:18:45.365] DML Start [2025-09-23 19:18:45.541] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:18:45.797] DML res1: 0 [2025-09-23 19:18:46.219] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:18:46.219] Read Success [2025-09-23 19:18:46.219] Verifying certificate... [2025-09-23 19:18:46.490] Verified OK [2025-09-23 19:18:46.506] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:18:48.275] Verified OK [2025-09-23 19:18:48.275] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:18:48.811] Verified OK [2025-09-23 19:18:48.811] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:18:51.354] fs.protected_hardlinks = 1 [2025-09-23 19:18:51.354] fs.protected_symlinks = 1 [2025-09-23 19:18:51.370] kernel.modules_disabled = 1 [2025-09-23 19:18:51.562] [2025-09-23 19:18:51.562] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:18:52.870] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:19:00.559] SBL1:1210.0.1.0 [2025-09-23 19:19:00.607] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:19:02.174] SBL2:1210.0.1.0 [2025-09-23 19:19:02.206] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:19:02.318] j-A [2025-09-23 19:19:09.671] The R5 Autosar Classic is running [2025-09-23 19:19:09.671] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:19:09.692] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:19:10.300] INIT: version 2.96 booting [2025-09-23 19:19:10.412] INIT: Entering runlevel: 5 [2025-09-23 19:19:10.555] mtd28 attached [2025-09-23 19:19:10.572] mtd32 attached [2025-09-23 19:19:10.588] mtd24 attached [2025-09-23 19:19:10.604] ubi0:animations is mounted. [2025-09-23 19:19:10.636] RTNETLINK answers: File exists [2025-09-23 19:19:10.636] ubi1:dml_code is mounted. [2025-09-23 19:19:10.694] ubi2:textures is mounted. [2025-09-23 19:19:10.694] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:19:10.694] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:19:10.694] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:19:10.694] data.LB_FadeInType0=100 [2025-09-23 19:19:10.694] data.CHLH_FadeInType0=0 [2025-09-23 19:19:10.694] data.WU_FadeInDelay=0 [2025-09-23 19:19:10.694] max_time_out=0 [2025-09-23 19:19:10.694] No splash screen [2025-09-23 19:19:10.694] stop dss Done [2025-09-23 19:19:10.694] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:19:10.694] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:19:10.748] /dev/mem opened. [2025-09-23 19:19:10.748] Memory mapped at address 0xffff98e5c000. [2025-09-23 19:19:10.748] Read at address 0x00600018 (0xffff98e5c018): 0x00000000 [2025-09-23 19:19:10.749] Write at address 0x00600018 (0xffff98e5c018): 0x00400040, readback 0x00400040 [2025-09-23 19:19:10.749] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:19:10.764] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:19:10.908] Loaded PowerVR consumer services. [2025-09-23 19:19:11.036] Waiting data available... [2025-09-23 19:19:11.052] 512+0 records in [2025-09-23 19:19:11.052] 512+0 records out [2025-09-23 19:19:11.068] Starting syslogd/klogd: done [2025-09-23 19:19:11.100] DML Start [2025-09-23 19:19:11.276] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:19:11.500] DML res1: 0 [2025-09-23 19:19:11.920] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:19:11.920] Read Success [2025-09-23 19:19:11.920] Verifying certificate... [2025-09-23 19:19:12.144] Verified OK [2025-09-23 19:19:12.160] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:19:13.933] Verified OK [2025-09-23 19:19:13.933] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:19:14.588] Verified OK [2025-09-23 19:19:14.588] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:19:17.193] fs.protected_hardlinks = 1 [2025-09-23 19:19:17.209] fs.protected_symlinks = 1 [2025-09-23 19:19:17.209] kernel.modules_disabled = 1 [2025-09-23 19:19:17.401] [2025-09-23 19:19:17.401] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:19:18.555] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:19:26.292] SBL1:1210.0.1.0 [2025-09-23 19:19:26.324] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:19:27.906] SBL2:1210.0.1.0 [2025-09-23 19:19:27.938] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:19:28.050] j-A [2025-09-23 19:19:35.423] The R5 Autosar Classic is running [2025-09-23 19:19:35.423] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:19:35.423] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:19:36.030] INIT: version 2.96 booting [2025-09-23 19:19:36.142] INIT: Entering runlevel: 5 [2025-09-23 19:19:36.302] mtd28 attached [2025-09-23 19:19:36.303] mtd32 attached [2025-09-23 19:19:36.318] mtd24 attached [2025-09-23 19:19:36.350] ubi0:animations is mounted. [2025-09-23 19:19:36.366] RTNETLINK answers: File exists [2025-09-23 19:19:36.423] ubi2:textures is mounted. [2025-09-23 19:19:36.423] ubi1:dml_code is mounted. [2025-09-23 19:19:36.423] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:19:36.423] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:19:36.423] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:19:36.423] data.LB_FadeInType0=100 [2025-09-23 19:19:36.423] data.CHLH_FadeInType0=0 [2025-09-23 19:19:36.423] data.WU_FadeInDelay=0 [2025-09-23 19:19:36.423] max_time_out=0 [2025-09-23 19:19:36.423] No splash screen [2025-09-23 19:19:36.423] stop dss Done [2025-09-23 19:19:36.423] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:19:36.423] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:19:36.493] /dev/mem opened. [2025-09-23 19:19:36.493] Memory mapped at address 0xffff95b74000. [2025-09-23 19:19:36.493] Read at address 0x00600018 (0xffff95b74018): 0x00000000 [2025-09-23 19:19:36.493] Write at address 0x00600018 (0xffff95b74018): 0x00400040, readback 0x00400040 [2025-09-23 19:19:36.493] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:19:36.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:19:36.749] Loaded PowerVR consumer services. [2025-09-23 19:19:36.781] Waiting data available... [2025-09-23 19:19:36.797] 512+0 records in [2025-09-23 19:19:36.797] 512+0 records out [2025-09-23 19:19:36.813] Starting syslogd/klogd: done [2025-09-23 19:19:36.845] DML Start [2025-09-23 19:19:37.005] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:19:37.229] DML res1: 0 [2025-09-23 19:19:37.701] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:19:37.701] Read Success [2025-09-23 19:19:37.701] Verifying certificate... [2025-09-23 19:19:37.973] Verified OK [2025-09-23 19:19:38.005] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:19:39.619] Verified OK [2025-09-23 19:19:39.619] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:19:40.242] Verified OK [2025-09-23 19:19:40.242] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:19:42.928] fs.protected_hardlinks = 1 [2025-09-23 19:19:42.928] fs.protected_symlinks = 1 [2025-09-23 19:19:42.944] kernel.modules_disabled = 1 [2025-09-23 19:19:43.135] [2025-09-23 19:19:43.135] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:19:44.300] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:19:52.021] SBL1:1210.0.1.0 [2025-09-23 19:19:52.053] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:19:53.637] SBL2:1210.0.1.0 [2025-09-23 19:19:53.668] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:19:53.780] j-A [2025-09-23 19:20:01.150] The R5 Autosar Classic is running [2025-09-23 19:20:01.150] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:20:01.150] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:20:01.758] INIT: version 2.96 booting [2025-09-23 19:20:01.870] INIT: Entering runlevel: 5 [2025-09-23 19:20:02.013] mtd24 attached [2025-09-23 19:20:02.029] mtd28 attached [2025-09-23 19:20:02.045] mtd32 attached [2025-09-23 19:20:02.093] RTNETLINK answers: File exists [2025-09-23 19:20:02.093] ubi0:textures is mounted. [2025-09-23 19:20:02.150] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:20:02.150] ubi1:animations is mounted. [2025-09-23 19:20:02.150] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:20:02.150] ubi2:dml_code is mounted. [2025-09-23 19:20:02.150] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:20:02.150] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:20:02.150] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:20:02.150] data.LB_FadeInType0=100 [2025-09-23 19:20:02.150] data.CHLH_FadeInType0=0 [2025-09-23 19:20:02.150] data.WU_FadeInDelay=0 [2025-09-23 19:20:02.150] max_time_out=0 [2025-09-23 19:20:02.150] No splash screen [2025-09-23 19:20:02.150] stop dss Done [2025-09-23 19:20:02.196] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:20:02.234] /dev/mem opened. [2025-09-23 19:20:02.234] Memory mapped at address 0xffffb1511000. [2025-09-23 19:20:02.234] Read at address 0x00600018 (0xffffb1511018): 0x00000000 [2025-09-23 19:20:02.234] Write at address 0x00600018 (0xffffb1511018): 0x00400040, readback 0x00400040 [2025-09-23 19:20:02.234] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:20:02.458] Loaded PowerVR consumer services. [2025-09-23 19:20:02.490] Waiting data available... [2025-09-23 19:20:02.506] 512+0 records in [2025-09-23 19:20:02.506] 512+0 records out [2025-09-23 19:20:02.522] Starting syslogd/klogd: done [2025-09-23 19:20:02.554] DML Start [2025-09-23 19:20:02.730] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:20:02.954] DML res1: 0 [2025-09-23 19:20:03.383] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:20:03.383] Read Success [2025-09-23 19:20:03.383] Verifying certificate... [2025-09-23 19:20:03.606] Verified OK [2025-09-23 19:20:03.622] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:20:05.237] Verified OK [2025-09-23 19:20:05.237] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:20:05.836] Verified OK [2025-09-23 19:20:05.836] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:20:08.394] fs.protected_hardlinks = 1 [2025-09-23 19:20:08.410] fs.protected_symlinks = 1 [2025-09-23 19:20:08.410] kernel.modules_disabled = 1 [2025-09-23 19:20:08.617] [2025-09-23 19:20:08.617] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:20:10.017] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:20:17.755] SBL1:1210.0.1.0 [2025-09-23 19:20:17.787] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:20:19.370] SBL2:1210.0.1.0 [2025-09-23 19:20:19.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:20:19.514] j-A [2025-09-23 19:20:26.887] The R5 Autosar Classic is running [2025-09-23 19:20:26.887] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:20:26.887] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:20:27.494] INIT: version 2.96 booting [2025-09-23 19:20:27.605] INIT: Entering runlevel: 5 [2025-09-23 19:20:27.750] mtd24 attached [2025-09-23 19:20:27.766] mtd28 attached [2025-09-23 19:20:27.798] ubi0:textures is mounted. [2025-09-23 19:20:27.798] mtd32 attached [2025-09-23 19:20:27.813] ubi1:animations is mounted. [2025-09-23 19:20:27.829] RTNETLINK answers: File exists [2025-09-23 19:20:27.884] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:20:27.884] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:20:27.884] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:20:27.884] ubi2:dml_code is mounted. [2025-09-23 19:20:27.884] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:20:27.884] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:20:27.884] data.LB_FadeInType0=100 [2025-09-23 19:20:27.884] data.CHLH_FadeInType0=0 [2025-09-23 19:20:27.884] data.WU_FadeInDelay=0 [2025-09-23 19:20:27.884] max_time_out=0 [2025-09-23 19:20:27.884] No splash screen [2025-09-23 19:20:27.884] stop dss Done [2025-09-23 19:20:27.958] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:20:27.958] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:20:27.958] /dev/mem opened. [2025-09-23 19:20:27.958] Memory mapped at address 0xffffa23eb000. [2025-09-23 19:20:27.958] Read at address 0x00600018 (0xffffa23eb018): 0x00000000 [2025-09-23 19:20:27.958] Write at address 0x00600018 (0xffffa23eb018): 0x00400040, readback 0x00400040 [2025-09-23 19:20:28.055] Loaded PowerVR consumer services. [2025-09-23 19:20:28.214] Waiting data available... [2025-09-23 19:20:28.230] 512+0 records in [2025-09-23 19:20:28.230] 512+0 records out [2025-09-23 19:20:28.278] Starting syslogd/klogd: done [2025-09-23 19:20:28.310] DML Start [2025-09-23 19:20:28.470] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:20:28.677] DML res1: 0 [2025-09-23 19:20:29.179] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:20:29.179] Read Success [2025-09-23 19:20:29.179] Verifying certificate... [2025-09-23 19:20:29.434] Verified OK [2025-09-23 19:20:29.450] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:20:31.161] Verified OK [2025-09-23 19:20:31.161] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:20:31.777] Verified OK [2025-09-23 19:20:31.777] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:20:34.333] fs.protected_hardlinks = 1 [2025-09-23 19:20:34.333] fs.protected_symlinks = 1 [2025-09-23 19:20:34.333] kernel.modules_disabled = 1 [2025-09-23 19:20:34.525] [2025-09-23 19:20:34.525] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:20:35.742] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:20:43.449] SBL1:1210.0.1.0 [2025-09-23 19:20:43.497] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:20:45.064] SBL2:1210.0.1.0 [2025-09-23 19:20:45.113] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:20:45.208] j-A [2025-09-23 19:20:52.564] The R5 Autosar Classic is running [2025-09-23 19:20:52.585] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:20:52.585] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:20:53.193] INIT: version 2.96 booting [2025-09-23 19:20:53.305] INIT: Entering runlevel: 5 [2025-09-23 19:20:53.449] mtd28 attached [2025-09-23 19:20:53.465] mtd24 attached [2025-09-23 19:20:53.481] mtd32 attached [2025-09-23 19:20:53.529] RTNETLINK answers: File exists [2025-09-23 19:20:53.529] ubi1:textures is mounted. [2025-09-23 19:20:53.565] ubi2:dml_code is mounted. [2025-09-23 19:20:53.565] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:20:53.565] ubi0:animations is mounted. [2025-09-23 19:20:53.565] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:20:53.565] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:20:53.565] data.LB_FadeInType0=100 [2025-09-23 19:20:53.597] data.CHLH_FadeInType0=0 [2025-09-23 19:20:53.597] data.WU_FadeInDelay=0 [2025-09-23 19:20:53.597] max_time_out=0 [2025-09-23 19:20:53.597] No splash screen [2025-09-23 19:20:53.597] stop dss Done [2025-09-23 19:20:53.597] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:20:53.597] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:20:53.684] /dev/mem opened. [2025-09-23 19:20:53.684] Memory mapped at address 0xffffb5d1a000. [2025-09-23 19:20:53.684] Read at address 0x00600018 (0xffffb5d1a018): 0x00000000 [2025-09-23 19:20:53.684] Write at address 0x00600018 (0xffffb5d1a018): 0x00400040, readback 0x00400040 [2025-09-23 19:20:53.684] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:20:53.684] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:20:53.763] Loaded PowerVR consumer services. [2025-09-23 19:20:53.935] Waiting data available... [2025-09-23 19:20:53.935] 512+0 records in [2025-09-23 19:20:53.935] 512+0 records out [2025-09-23 19:20:53.951] Starting syslogd/klogd: done [2025-09-23 19:20:53.967] DML Start [2025-09-23 19:20:54.142] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:20:54.399] DML res1: 0 [2025-09-23 19:20:54.798] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:20:54.814] Read Success [2025-09-23 19:20:54.814] Verifying certificate... [2025-09-23 19:20:55.054] Verified OK [2025-09-23 19:20:55.070] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:20:56.742] Verified OK [2025-09-23 19:20:56.742] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:20:57.373] Verified OK [2025-09-23 19:20:57.373] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:21:00.042] fs.protected_hardlinks = 1 [2025-09-23 19:21:00.058] fs.protected_symlinks = 1 [2025-09-23 19:21:00.074] kernel.modules_disabled = 1 [2025-09-23 19:21:00.266] [2025-09-23 19:21:00.266] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:21:01.475] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:21:09.186] SBL1:1210.0.1.0 [2025-09-23 19:21:09.234] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:21:10.801] SBL2:1210.0.1.0 [2025-09-23 19:21:10.848] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:21:10.945] j-A [2025-09-23 19:21:18.301] The R5 Autosar Classic is running [2025-09-23 19:21:18.323] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:21:18.323] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:21:18.931] INIT: version 2.96 booting [2025-09-23 19:21:19.042] INIT: Entering runlevel: 5 [2025-09-23 19:21:19.187] mtd28 attached [2025-09-23 19:21:19.203] mtd24 attached [2025-09-23 19:21:19.235] ubi0:animations is mounted. [2025-09-23 19:21:19.277] ubi1:textures is mounted. [2025-09-23 19:21:19.277] mtd32 attached [2025-09-23 19:21:19.277] RTNETLINK answers: File exists [2025-09-23 19:21:19.277] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:21:19.310] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:21:19.310] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:21:19.310] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:21:19.310] ubi2:dml_code is mounted. [2025-09-23 19:21:19.310] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:21:19.326] data.LB_FadeInType0=100 [2025-09-23 19:21:19.326] data.CHLH_FadeInType0=0 [2025-09-23 19:21:19.359] data.WU_FadeInDelay=0 [2025-09-23 19:21:19.359] max_time_out=0 [2025-09-23 19:21:19.359] No splash screen [2025-09-23 19:21:19.359] stop dss Done [2025-09-23 19:21:19.359] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:21:19.359] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:21:19.391] /dev/mem opened. [2025-09-23 19:21:19.391] Memory mapped at address 0xffff9d808000. [2025-09-23 19:21:19.417] Read at address 0x00600018 (0xffff9d808018): 0x00000000 [2025-09-23 19:21:19.417] Write at address 0x00600018 (0xffff9d808018): 0x00400040, readback 0x00400040 [2025-09-23 19:21:19.481] Loaded PowerVR consumer services. [2025-09-23 19:21:19.657] Waiting data available... [2025-09-23 19:21:19.673] 512+0 records in [2025-09-23 19:21:19.673] 512+0 records out [2025-09-23 19:21:19.721] Starting syslogd/klogd: done [2025-09-23 19:21:19.737] DML Start [2025-09-23 19:21:19.912] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:21:20.105] DML res1: 0 [2025-09-23 19:21:20.609] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:21:20.609] Read Success [2025-09-23 19:21:20.609] Verifying certificate... [2025-09-23 19:21:20.848] Verified OK [2025-09-23 19:21:20.865] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:21:22.550] Verified OK [2025-09-23 19:21:22.550] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:21:23.212] Verified OK [2025-09-23 19:21:23.212] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:21:25.786] fs.protected_hardlinks = 1 [2025-09-23 19:21:25.802] fs.protected_symlinks = 1 [2025-09-23 19:21:25.818] kernel.modules_disabled = 1 [2025-09-23 19:21:26.010] [2025-09-23 19:21:26.010] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:21:27.161] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:21:34.904] SBL1:1210.0.1.0 [2025-09-23 19:21:34.936] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:21:36.520] SBL2:1210.0.1.0 [2025-09-23 19:21:36.552] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:21:36.663] j-A [2025-09-23 19:21:44.036] The R5 Autosar Classic is running [2025-09-23 19:21:44.036] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:21:44.036] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:21:44.644] INIT: version 2.96 booting [2025-09-23 19:21:44.756] INIT: Entering runlevel: 5 [2025-09-23 19:21:44.916] mtd32 attached [2025-09-23 19:21:44.916] mtd28 attached [2025-09-23 19:21:44.932] mtd24 attached [2025-09-23 19:21:44.980] RTNETLINK answers: File exists [2025-09-23 19:21:45.023] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:21:45.023] ubi2:textures is mounted. [2025-09-23 19:21:45.023] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:21:45.023] ubi0:dml_code is mounted. [2025-09-23 19:21:45.023] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:21:45.023] ubi1:animations is mounted. [2025-09-23 19:21:45.023] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:21:45.023] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:21:45.045] data.LB_FadeInType0=100 [2025-09-23 19:21:45.045] data.CHLH_FadeInType0=0 [2025-09-23 19:21:45.045] data.WU_FadeInDelay=0 [2025-09-23 19:21:45.045] max_time_out=0 [2025-09-23 19:21:45.045] No splash screen [2025-09-23 19:21:45.045] stop dss Done [2025-09-23 19:21:45.075] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:21:45.075] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:21:45.111] /dev/mem opened. [2025-09-23 19:21:45.111] Memory mapped at address 0xffff8e93d000. [2025-09-23 19:21:45.111] Read at address 0x00600018 (0xffff8e93d018): 0x00000000 [2025-09-23 19:21:45.111] Write at address 0x00600018 (0xffff8e93d018): 0x00400040, readback 0x00400040 [2025-09-23 19:21:45.335] Loaded PowerVR consumer services. [2025-09-23 19:21:45.351] Waiting data available... [2025-09-23 19:21:45.383] 512+0 records in [2025-09-23 19:21:45.383] 512+0 records out [2025-09-23 19:21:45.430] Starting syslogd/klogd: done [2025-09-23 19:21:45.447] DML Start [2025-09-23 19:21:45.639] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:21:45.863] DML res1: 0 [2025-09-23 19:21:46.242] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:21:46.242] Read Success [2025-09-23 19:21:46.242] Verifying certificate... [2025-09-23 19:21:46.465] Verified OK [2025-09-23 19:21:46.481] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:21:48.144] Verified OK [2025-09-23 19:21:48.144] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:21:48.730] Verified OK [2025-09-23 19:21:48.730] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:21:51.481] fs.protected_hardlinks = 1 [2025-09-23 19:21:51.481] fs.protected_symlinks = 1 [2025-09-23 19:21:51.497] kernel.modules_disabled = 1 [2025-09-23 19:21:51.672] [2025-09-23 19:21:51.688] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:21:52.947] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:22:00.635] SBL1:1210.0.1.0 [2025-09-23 19:22:00.667] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:22:02.250] SBL2:1210.0.1.0 [2025-09-23 19:22:02.282] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:22:02.394] j-A [2025-09-23 19:22:09.767] The R5 Autosar Classic is running [2025-09-23 19:22:09.767] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:22:09.767] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:22:10.374] INIT: version 2.96 booting [2025-09-23 19:22:10.487] INIT: Entering runlevel: 5 [2025-09-23 19:22:10.646] mtd24 attached [2025-09-23 19:22:10.646] mtd28 attached [2025-09-23 19:22:10.662] mtd32 attached [2025-09-23 19:22:10.710] ubi0:textures is mounted. [2025-09-23 19:22:10.710] ubi1:animations is mounted. [2025-09-23 19:22:10.765] ubi2:dml_code is mounted. [2025-09-23 19:22:10.765] RTNETLINK answers: File exists [2025-09-23 19:22:10.765] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:22:10.765] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:22:10.765] data.LB_FadeInType0=100 [2025-09-23 19:22:10.765] data.CHLH_FadeInType0=0 [2025-09-23 19:22:10.765] data.WU_FadeInDelay=0 [2025-09-23 19:22:10.765] max_time_out=0 [2025-09-23 19:22:10.765] No splash screen [2025-09-23 19:22:10.765] stop dss Done [2025-09-23 19:22:10.765] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:22:10.765] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:22:10.765] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:22:10.822] /dev/mem opened. [2025-09-23 19:22:10.822] Memory mapped at address 0xffffb8bc8000. [2025-09-23 19:22:10.822] Read at address 0x00600018 (0xffffb8bc8018): 0x00000000 [2025-09-23 19:22:10.822] Write at address 0x00600018 (0xffffb8bc8018): 0x00400040, readback 0x00400040 [2025-09-23 19:22:10.822] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:22:10.822] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:22:10.982] Loaded PowerVR consumer services. [2025-09-23 19:22:11.125] Waiting data available... [2025-09-23 19:22:11.125] 512+0 records in [2025-09-23 19:22:11.125] 512+0 records out [2025-09-23 19:22:11.157] Starting syslogd/klogd: done [2025-09-23 19:22:11.173] DML Start [2025-09-23 19:22:11.333] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:22:11.540] DML res1: 0 [2025-09-23 19:22:12.076] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:22:12.076] Read Success [2025-09-23 19:22:12.076] Verifying certificate... [2025-09-23 19:22:12.349] Verified OK [2025-09-23 19:22:12.364] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:22:13.963] Verified OK [2025-09-23 19:22:13.979] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:22:14.650] Verified OK [2025-09-23 19:22:14.650] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:22:17.209] fs.protected_hardlinks = 1 [2025-09-23 19:22:17.224] fs.protected_symlinks = 1 [2025-09-23 19:22:17.224] kernel.modules_disabled = 1 [2025-09-23 19:22:17.416] [2025-09-23 19:22:17.416] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:22:18.605] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:22:26.337] SBL1:1210.0.1.0 [2025-09-23 19:22:26.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:22:27.953] SBL2:1210.0.1.0 [2025-09-23 19:22:28.001] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:22:28.097] j-A [2025-09-23 19:22:35.451] The R5 Autosar Classic is running [2025-09-23 19:22:35.472] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:22:35.472] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:22:36.080] INIT: version 2.96 booting [2025-09-23 19:22:36.191] INIT: Entering runlevel: 5 [2025-09-23 19:22:36.351] mtd24 attached [2025-09-23 19:22:36.367] mtd32 attached [2025-09-23 19:22:36.367] mtd28 attached [2025-09-23 19:22:36.415] RTNETLINK answers: File exists [2025-09-23 19:22:36.461] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:22:36.461] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:22:36.461] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:22:36.461] ubi0:textures is mounted. [2025-09-23 19:22:36.461] ubi1:dml_code is mounted. [2025-09-23 19:22:36.461] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:22:36.461] ubi2:animations is mounted. [2025-09-23 19:22:36.461] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:22:36.483] data.LB_FadeInType0=100 [2025-09-23 19:22:36.483] data.CHLH_FadeInType0=0 [2025-09-23 19:22:36.483] data.WU_FadeInDelay=0 [2025-09-23 19:22:36.483] max_time_out=0 [2025-09-23 19:22:36.483] No splash screen [2025-09-23 19:22:36.483] stop dss Done [2025-09-23 19:22:36.515] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:22:36.515] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:22:36.565] /dev/mem opened. [2025-09-23 19:22:36.565] Memory mapped at address 0xffff9da42000. [2025-09-23 19:22:36.565] Read at address 0x00600018 (0xffff9da42018): 0x00000000 [2025-09-23 19:22:36.565] Write at address 0x00600018 (0xffff9da42018): 0x00400040, readback 0x00400040 [2025-09-23 19:22:36.660] Loaded PowerVR consumer services. [2025-09-23 19:22:36.805] Waiting data available... [2025-09-23 19:22:36.821] 512+0 records in [2025-09-23 19:22:36.821] 512+0 records out [2025-09-23 19:22:36.853] Starting syslogd/klogd: done [2025-09-23 19:22:36.869] DML Start [2025-09-23 19:22:37.044] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:22:37.284] DML res1: 0 [2025-09-23 19:22:37.723] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:22:37.723] Read Success [2025-09-23 19:22:37.723] Verifying certificate... [2025-09-23 19:22:37.995] Verified OK [2025-09-23 19:22:38.027] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:22:39.683] Verified OK [2025-09-23 19:22:39.683] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:22:40.271] Verified OK [2025-09-23 19:22:40.271] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:22:42.878] fs.protected_hardlinks = 1 [2025-09-23 19:22:42.878] fs.protected_symlinks = 1 [2025-09-23 19:22:42.894] kernel.modules_disabled = 1 [2025-09-23 19:22:43.069] [2025-09-23 19:22:43.069] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:22:44.315] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:22:52.071] SBL1:1210.0.1.0 [2025-09-23 19:22:52.103] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:22:53.685] SBL2:1210.0.1.0 [2025-09-23 19:22:53.717] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:22:53.830] j-A [2025-09-23 19:23:01.200] The R5 Autosar Classic is running [2025-09-23 19:23:01.200] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:23:01.200] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:23:01.807] INIT: version 2.96 booting [2025-09-23 19:23:01.919] INIT: Entering runlevel: 5 [2025-09-23 19:23:02.079] mtd28 attached [2025-09-23 19:23:02.079] mtd32 attached [2025-09-23 19:23:02.095] mtd24 attached [2025-09-23 19:23:02.143] RTNETLINK answers: File exists [2025-09-23 19:23:02.206] ubi1:dml_code is mounted. [2025-09-23 19:23:02.206] ubi0:animations is mounted. [2025-09-23 19:23:02.206] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:23:02.206] ubi2:textures is mounted. [2025-09-23 19:23:02.206] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:23:02.206] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:23:02.206] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:23:02.206] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:23:02.206] data.LB_FadeInType0=100 [2025-09-23 19:23:02.206] data.CHLH_FadeInType0=0 [2025-09-23 19:23:02.206] data.WU_FadeInDelay=0 [2025-09-23 19:23:02.206] max_time_out=0 [2025-09-23 19:23:02.206] No splash screen [2025-09-23 19:23:02.206] stop dss Done [2025-09-23 19:23:02.278] /dev/mem opened. [2025-09-23 19:23:02.278] Memory mapped at address 0xffff88408000. [2025-09-23 19:23:02.278] Read at address 0x00600018 (0xffff88408018): 0x00000000 [2025-09-23 19:23:02.278] Write at address 0x00600018 (0xffff88408018): 0x00400040, readback 0x00400040 [2025-09-23 19:23:02.310] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:23:02.326] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:23:02.454] Loaded PowerVR consumer services. [2025-09-23 19:23:02.565] Waiting data available... [2025-09-23 19:23:02.565] 512+0 records in [2025-09-23 19:23:02.565] 512+0 records out [2025-09-23 19:23:02.597] Starting syslogd/klogd: done [2025-09-23 19:23:02.613] DML Start [2025-09-23 19:23:02.789] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:23:02.998] DML res1: 0 [2025-09-23 19:23:03.484] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:23:03.484] Read Success [2025-09-23 19:23:03.484] Verifying certificate... [2025-09-23 19:23:03.724] Verified OK [2025-09-23 19:23:03.740] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:23:05.302] Verified OK [2025-09-23 19:23:05.302] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:23:05.903] Verified OK [2025-09-23 19:23:05.903] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:23:08.541] fs.protected_hardlinks = 1 [2025-09-23 19:23:08.557] fs.protected_symlinks = 1 [2025-09-23 19:23:08.557] kernel.modules_disabled = 1 [2025-09-23 19:23:08.749] [2025-09-23 19:23:08.749] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:23:10.044] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:23:17.796] SBL1:1210.0.1.0 [2025-09-23 19:23:17.828] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:23:19.410] SBL2:1210.0.1.0 [2025-09-23 19:23:19.442] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:23:19.554] j-A [2025-09-23 19:23:26.926] The R5 Autosar Classic is running [2025-09-23 19:23:26.926] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:23:26.926] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:23:27.534] INIT: version 2.96 booting [2025-09-23 19:23:27.647] INIT: Entering runlevel: 5 [2025-09-23 19:23:27.806] mtd24 attached [2025-09-23 19:23:27.806] mtd28 attached [2025-09-23 19:23:27.838] mtd32 attached [2025-09-23 19:23:27.870] ubi0:textures is mounted. [2025-09-23 19:23:27.870] ubi1:animations is mounted. [2025-09-23 19:23:27.930] RTNETLINK answers: File exists [2025-09-23 19:23:27.930] ubi2:dml_code is mounted. [2025-09-23 19:23:27.930] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:23:27.930] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:23:27.930] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:23:27.930] data.LB_FadeInType0=100 [2025-09-23 19:23:27.930] data.CHLH_FadeInType0=0 [2025-09-23 19:23:27.930] data.WU_FadeInDelay=0 [2025-09-23 19:23:27.930] max_time_out=0 [2025-09-23 19:23:27.930] No splash screen [2025-09-23 19:23:27.930] stop dss Done [2025-09-23 19:23:27.930] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:23:27.930] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:23:28.015] /dev/mem opened. [2025-09-23 19:23:28.015] Memory mapped at address 0xffff8326e000. [2025-09-23 19:23:28.015] Read at address 0x00600018 (0xffff8326e018): 0x00000000 [2025-09-23 19:23:28.015] Write at address 0x00600018 (0xffff8326e018): 0x00400040, readback 0x00400040 [2025-09-23 19:23:28.015] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:23:28.015] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:23:28.238] Loaded PowerVR consumer services. [2025-09-23 19:23:28.287] 512+0 records in [2025-09-23 19:23:28.287] 512+0 records out [2025-09-23 19:23:28.287] Waiting data available... [2025-09-23 19:23:28.334] Starting syslogd/klogd: done [2025-09-23 19:23:28.350] DML Start [2025-09-23 19:23:28.527] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:23:28.751] DML res1: 0 [2025-09-23 19:23:29.161] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:23:29.161] Read Success [2025-09-23 19:23:29.161] Verifying certificate... [2025-09-23 19:23:29.433] Verified OK [2025-09-23 19:23:29.449] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:23:31.039] Verified OK [2025-09-23 19:23:31.039] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:23:31.630] Verified OK [2025-09-23 19:23:31.630] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:23:34.253] fs.protected_hardlinks = 1 [2025-09-23 19:23:34.269] fs.protected_symlinks = 1 [2025-09-23 19:23:34.269] kernel.modules_disabled = 1 [2025-09-23 19:23:34.461] [2025-09-23 19:23:34.461] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:23:35.816] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:23:43.498] SBL1:1210.0.1.0 [2025-09-23 19:23:43.546] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:23:45.113] SBL2:1210.0.1.0 [2025-09-23 19:23:45.161] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:23:45.257] j-A [2025-09-23 19:23:52.612] The R5 Autosar Classic is running [2025-09-23 19:23:52.636] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:23:52.636] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:23:53.244] INIT: version 2.96 booting [2025-09-23 19:23:53.356] INIT: Entering runlevel: 5 [2025-09-23 19:23:53.516] mtd32 attached [2025-09-23 19:23:53.516] mtd28 attached [2025-09-23 19:23:53.532] mtd24 attached [2025-09-23 19:23:53.581] RTNETLINK answers: File exists [2025-09-23 19:23:53.648] ubi0:dml_code is mounted. [2025-09-23 19:23:53.648] ubi2:textures is mounted. [2025-09-23 19:23:53.648] ubi1:animations is mounted. [2025-09-23 19:23:53.648] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:23:53.648] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:23:53.648] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:23:53.648] data.LB_FadeInType0=100 [2025-09-23 19:23:53.648] data.CHLH_FadeInType0=0 [2025-09-23 19:23:53.648] data.WU_FadeInDelay=0 [2025-09-23 19:23:53.648] max_time_out=0 [2025-09-23 19:23:53.648] No splash screen [2025-09-23 19:23:53.648] stop dss Done [2025-09-23 19:23:53.648] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:23:53.648] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:23:53.695] /dev/mem opened. [2025-09-23 19:23:53.695] Memory mapped at address 0xffffa88ea000. [2025-09-23 19:23:53.721] Read at address 0x00600018 (0xffffa88ea018): 0x00000000 [2025-09-23 19:23:53.721] Write at address 0x00600018 (0xffffa88ea018): 0x00400040, readback 0x00400040 [2025-09-23 19:23:53.721] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:23:53.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:23:53.896] Loaded PowerVR consumer services. [2025-09-23 19:23:53.993] Waiting data available... [2025-09-23 19:23:54.009] 512+0 records in [2025-09-23 19:23:54.009] 512+0 records out [2025-09-23 19:23:54.057] Starting syslogd/klogd: done [2025-09-23 19:23:54.073] DML Start [2025-09-23 19:23:54.249] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:23:54.457] DML res1: 0 [2025-09-23 19:23:54.870] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:23:54.870] Read Success [2025-09-23 19:23:54.870] Verifying certificate... [2025-09-23 19:23:55.142] Verified OK [2025-09-23 19:23:55.158] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:23:56.789] Verified OK [2025-09-23 19:23:56.789] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:23:57.417] Verified OK [2025-09-23 19:23:57.417] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:24:00.071] fs.protected_hardlinks = 1 [2025-09-23 19:24:00.071] fs.protected_symlinks = 1 [2025-09-23 19:24:00.087] kernel.modules_disabled = 1 [2025-09-23 19:24:00.279] [2025-09-23 19:24:00.279] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:24:01.501] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:24:09.227] SBL1:1210.0.1.0 [2025-09-23 19:24:09.259] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:24:10.842] SBL2:1210.0.1.0 [2025-09-23 19:24:10.874] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 19:24:10.986] j-A [2025-09-23 19:24:18.358] The R5 Autosar Classic is running [2025-09-23 19:24:18.358] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:24:18.358] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:24:18.966] INIT: version 2.96 booting [2025-09-23 19:24:19.077] INIT: Entering runlevel: 5 [2025-09-23 19:24:19.238] mtd24 attached [2025-09-23 19:24:19.238] mtd28 attached [2025-09-23 19:24:19.253] mtd32 attached [2025-09-23 19:24:19.337] ubi0:textures is mounted. [2025-09-23 19:24:19.337] RTNETLINK answers: File exists [2025-09-23 19:24:19.337] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:24:19.337] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:24:19.337] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:24:19.337] ubi2:dml_code is mounted. [2025-09-23 19:24:19.337] ubi1:animations is mounted. [2025-09-23 19:24:19.337] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:24:19.337] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:24:19.361] data.LB_FadeInType0=100 [2025-09-23 19:24:19.361] data.CHLH_FadeInType0=0 [2025-09-23 19:24:19.361] data.WU_FadeInDelay=0 [2025-09-23 19:24:19.361] max_time_out=0 [2025-09-23 19:24:19.361] No splash screen [2025-09-23 19:24:19.361] stop dss Done [2025-09-23 19:24:19.409] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:24:19.409] /dev/mem opened. [2025-09-23 19:24:19.442] Memory mapped at address 0xffffbbe2f000. [2025-09-23 19:24:19.442] Read at address 0x00600018 (0xffffbbe2f018): 0x00000000 [2025-09-23 19:24:19.442] Write at address 0x00600018 (0xffffbbe2f018): 0x00400040, readback 0x00400040 [2025-09-23 19:24:19.442] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:24:19.665] Loaded PowerVR consumer services. [2025-09-23 19:24:19.681] Waiting data available... [2025-09-23 19:24:19.697] 512+0 records in [2025-09-23 19:24:19.697] 512+0 records out [2025-09-23 19:24:19.713] Starting syslogd/klogd: done [2025-09-23 19:24:19.745] DML Start [2025-09-23 19:24:19.953] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:24:20.176] DML res1: 0 [2025-09-23 19:24:20.556] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:24:20.556] Read Success [2025-09-23 19:24:20.556] Verifying certificate... [2025-09-23 19:24:20.812] Verified OK [2025-09-23 19:24:20.828] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:24:22.411] Verified OK [2025-09-23 19:24:22.411] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:24:23.089] Verified OK [2025-09-23 19:24:23.089] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:24:25.855] fs.protected_hardlinks = 1 [2025-09-23 19:24:25.855] fs.protected_symlinks = 1 [2025-09-23 19:24:25.871] kernel.modules_disabled = 1 [2025-09-23 19:24:26.063] [2025-09-23 19:24:26.063] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:24:27.243] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:24:34.926] SBL1:1210.0.1.0 [2025-09-23 19:24:34.974] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:24:36.541] SBL2:1210.0.1.0 [2025-09-23 19:24:36.588] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:24:36.685] j-A [2025-09-23 19:24:44.041] The R5 Autosar Classic is running [2025-09-23 19:24:44.041] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:24:44.062] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:24:44.669] INIT: version 2.96 booting [2025-09-23 19:24:44.781] INIT: Entering runlevel: 5 [2025-09-23 19:24:44.925] mtd24 attached [2025-09-23 19:24:44.941] mtd28 attached [2025-09-23 19:24:44.957] mtd32 attached [2025-09-23 19:24:45.058] RTNETLINK answers: File exists [2025-09-23 19:24:45.058] ubi1:animations is mounted. [2025-09-23 19:24:45.058] ubi0:textures is mounted. [2025-09-23 19:24:45.058] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:24:45.058] ubi2:dml_code is mounted. [2025-09-23 19:24:45.058] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:24:45.058] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:24:45.058] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:24:45.058] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:24:45.058] data.LB_FadeInType0=100 [2025-09-23 19:24:45.058] data.CHLH_FadeInType0=0 [2025-09-23 19:24:45.058] data.WU_FadeInDelay=0 [2025-09-23 19:24:45.058] max_time_out=0 [2025-09-23 19:24:45.058] No splash screen [2025-09-23 19:24:45.058] stop dss Done [2025-09-23 19:24:45.114] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:24:45.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:24:45.114] /dev/mem opened. [2025-09-23 19:24:45.114] Memory mapped at address 0xffff93ae8000. [2025-09-23 19:24:45.114] Read at address 0x00600018 (0xffff93ae8018): 0x00000000 [2025-09-23 19:24:45.114] Write at address 0x00600018 (0xffff93ae8018): 0x00400040, readback 0x00400040 [2025-09-23 19:24:45.275] Loaded PowerVR consumer services. [2025-09-23 19:24:45.402] Waiting data available... [2025-09-23 19:24:45.418] 512+0 records in [2025-09-23 19:24:45.418] 512+0 records out [2025-09-23 19:24:45.450] Starting syslogd/klogd: done [2025-09-23 19:24:45.482] DML Start [2025-09-23 19:24:45.642] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:24:45.882] DML res1: 0 [2025-09-23 19:24:46.323] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:24:46.323] Read Success [2025-09-23 19:24:46.323] Verifying certificate... [2025-09-23 19:24:46.531] Verified OK [2025-09-23 19:24:46.547] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:24:48.064] Verified OK [2025-09-23 19:24:48.064] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:24:48.688] Verified OK [2025-09-23 19:24:48.688] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:24:51.421] fs.protected_hardlinks = 1 [2025-09-23 19:24:51.437] fs.protected_symlinks = 1 [2025-09-23 19:24:51.453] kernel.modules_disabled = 1 [2025-09-23 19:24:51.629] [2025-09-23 19:24:51.645] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:24:52.886] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:25:00.656] SBL1:1210.0.1.0 [2025-09-23 19:25:00.704] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:25:02.271] SBL2:1210.0.1.0 [2025-09-23 19:25:02.319] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:25:02.415] j-A [2025-09-23 19:25:09.771] The R5 Autosar Classic is running [2025-09-23 19:25:09.794] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:25:09.794] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:25:10.402] INIT: version 2.96 booting [2025-09-23 19:25:10.513] INIT: Entering runlevel: 5 [2025-09-23 19:25:10.674] mtd32 attached [2025-09-23 19:25:10.689] mtd24 attached [2025-09-23 19:25:10.689] mtd28 attached [2025-09-23 19:25:10.737] RTNETLINK answers: File exists [2025-09-23 19:25:10.787] ubi0:dml_code is mounted. [2025-09-23 19:25:10.787] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:25:10.787] ubi2:animations is mounted. [2025-09-23 19:25:10.787] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:25:10.787] ubi1:textures is mounted. [2025-09-23 19:25:10.787] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:25:10.787] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:25:10.787] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:25:10.809] data.LB_FadeInType0=100 [2025-09-23 19:25:10.809] data.CHLH_FadeInType0=0 [2025-09-23 19:25:10.809] data.WU_FadeInDelay=0 [2025-09-23 19:25:10.809] max_time_out=0 [2025-09-23 19:25:10.809] No splash screen [2025-09-23 19:25:10.809] stop dss Done [2025-09-23 19:25:10.895] /dev/mem opened. [2025-09-23 19:25:10.895] Memory mapped at address 0xffffa4ef7000. [2025-09-23 19:25:10.895] Read at address 0x00600018 (0xffffa4ef7018): 0x00000000 [2025-09-23 19:25:10.895] Write at address 0x00600018 (0xffffa4ef7018): 0x00400040, readback 0x00400040 [2025-09-23 19:25:10.895] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:25:10.895] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:25:11.038] Loaded PowerVR consumer services. [2025-09-23 19:25:11.150] Waiting data available... [2025-09-23 19:25:11.166] 512+0 records in [2025-09-23 19:25:11.166] 512+0 records out [2025-09-23 19:25:11.182] Starting syslogd/klogd: done [2025-09-23 19:25:11.214] DML Start [2025-09-23 19:25:11.406] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:25:11.629] DML res1: 0 [2025-09-23 19:25:12.030] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:25:12.050] Read Success [2025-09-23 19:25:12.050] Verifying certificate... [2025-09-23 19:25:12.290] Verified OK [2025-09-23 19:25:12.306] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:25:13.847] Verified OK [2025-09-23 19:25:13.847] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:25:14.429] Verified OK [2025-09-23 19:25:14.429] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:25:17.179] fs.protected_hardlinks = 1 [2025-09-23 19:25:17.195] fs.protected_symlinks = 1 [2025-09-23 19:25:17.195] kernel.modules_disabled = 1 [2025-09-23 19:25:17.387] [2025-09-23 19:25:17.387] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:25:18.677] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:25:26.371] SBL1:1210.0.1.0 [2025-09-23 19:25:26.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:25:27.986] SBL2:1210.0.1.0 [2025-09-23 19:25:28.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:25:28.130] j-A [2025-09-23 19:25:35.503] The R5 Autosar Classic is running [2025-09-23 19:25:35.503] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:25:35.503] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:25:36.111] INIT: version 2.96 booting [2025-09-23 19:25:36.223] INIT: Entering runlevel: 5 [2025-09-23 19:25:36.366] mtd28 attached [2025-09-23 19:25:36.382] mtd24 attached [2025-09-23 19:25:36.398] mtd32 attached [2025-09-23 19:25:36.430] ubi0:animations is mounted. [2025-09-23 19:25:36.446] ubi1:textures is mounted. [2025-09-23 19:25:36.446] RTNETLINK answers: File exists [2025-09-23 19:25:36.504] ubi2:dml_code is mounted. [2025-09-23 19:25:36.504] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:25:36.504] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:25:36.504] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:25:36.504] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:25:36.504] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:25:36.504] data.LB_FadeInType0=100 [2025-09-23 19:25:36.504] data.CHLH_FadeInType0=0 [2025-09-23 19:25:36.504] data.WU_FadeInDelay=0 [2025-09-23 19:25:36.504] max_time_out=0 [2025-09-23 19:25:36.504] No splash screen [2025-09-23 19:25:36.504] stop dss Done [2025-09-23 19:25:36.535] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:25:36.574] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:25:36.574] /dev/mem opened. [2025-09-23 19:25:36.574] Memory mapped at address 0xffff9dee1000. [2025-09-23 19:25:36.574] Read at address 0x00600018 (0xffff9dee1018): 0x00000000 [2025-09-23 19:25:36.574] Write at address 0x00600018 (0xffff9dee1018): 0x00400040, readback 0x00400040 [2025-09-23 19:25:36.799] Loaded PowerVR consumer services. [2025-09-23 19:25:36.847] Waiting data available... [2025-09-23 19:25:36.862] 512+0 records in [2025-09-23 19:25:36.862] 512+0 records out [2025-09-23 19:25:36.910] Starting syslogd/klogd: done [2025-09-23 19:25:36.942] DML Start [2025-09-23 19:25:37.134] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:25:37.326] DML res1: 0 [2025-09-23 19:25:37.814] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:25:37.814] Read Success [2025-09-23 19:25:37.814] Verifying certificate... [2025-09-23 19:25:38.069] Verified OK [2025-09-23 19:25:38.085] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:25:39.653] Verified OK [2025-09-23 19:25:39.653] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:25:40.324] Verified OK [2025-09-23 19:25:40.324] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:25:42.979] fs.protected_hardlinks = 1 [2025-09-23 19:25:42.979] fs.protected_symlinks = 1 [2025-09-23 19:25:42.995] kernel.modules_disabled = 1 [2025-09-23 19:25:43.202] [2025-09-23 19:25:43.202] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:25:44.332] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:25:52.088] SBL1:1210.0.1.0 [2025-09-23 19:25:52.120] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:25:53.702] SBL2:1210.0.1.0 [2025-09-23 19:25:53.734] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:25:53.847] j-A [2025-09-23 19:26:01.219] The R5 Autosar Classic is running [2025-09-23 19:26:01.219] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:26:01.219] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:26:01.827] INIT: version 2.96 booting [2025-09-23 19:26:01.939] INIT: Entering runlevel: 5 [2025-09-23 19:26:02.099] mtd32 attached [2025-09-23 19:26:02.099] mtd28 attached [2025-09-23 19:26:02.115] mtd24 attached [2025-09-23 19:26:02.163] ubi1:animations is mounted. [2025-09-23 19:26:02.230] RTNETLINK answers: File exists [2025-09-23 19:26:02.230] ubi2:textures is mounted. [2025-09-23 19:26:02.230] ubi0:dml_code is mounted. [2025-09-23 19:26:02.230] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:26:02.230] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:26:02.230] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:26:02.230] data.LB_FadeInType0=100 [2025-09-23 19:26:02.230] data.CHLH_FadeInType0=0 [2025-09-23 19:26:02.230] data.WU_FadeInDelay=0 [2025-09-23 19:26:02.230] max_time_out=0 [2025-09-23 19:26:02.230] No splash screen [2025-09-23 19:26:02.230] stop dss Done [2025-09-23 19:26:02.230] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:26:02.245] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:26:02.312] /dev/mem opened. [2025-09-23 19:26:02.312] Memory mapped at address 0xffffb02cd000. [2025-09-23 19:26:02.312] Read at address 0x00600018 (0xffffb02cd018): 0x00000000 [2025-09-23 19:26:02.312] Write at address 0x00600018 (0xffffb02cd018): 0x00400040, readback 0x00400040 [2025-09-23 19:26:02.344] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:26:02.360] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:26:02.537] Loaded PowerVR consumer services. [2025-09-23 19:26:02.568] Waiting data available... [2025-09-23 19:26:02.584] 512+0 records in [2025-09-23 19:26:02.584] 512+0 records out [2025-09-23 19:26:02.632] Starting syslogd/klogd: done [2025-09-23 19:26:02.648] DML Start [2025-09-23 19:26:02.856] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:26:03.080] DML res1: 0 [2025-09-23 19:26:03.492] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:26:03.492] Read Success [2025-09-23 19:26:03.492] Verifying certificate... [2025-09-23 19:26:03.716] Verified OK [2025-09-23 19:26:03.716] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:26:05.449] Verified OK [2025-09-23 19:26:05.449] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:26:06.134] Verified OK [2025-09-23 19:26:06.134] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:26:08.756] fs.protected_hardlinks = 1 [2025-09-23 19:26:08.772] fs.protected_symlinks = 1 [2025-09-23 19:26:08.772] kernel.modules_disabled = 1 [2025-09-23 19:26:08.963] [2025-09-23 19:26:08.963] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:26:10.095] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:26:17.796] SBL1:1210.0.1.0 [2025-09-23 19:26:17.844] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:26:19.411] SBL2:1210.0.1.0 [2025-09-23 19:26:19.459] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:26:19.554] j-A [2025-09-23 19:26:26.910] The R5 Autosar Classic is running [2025-09-23 19:26:26.934] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:26:26.934] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:26:27.542] INIT: version 2.96 booting [2025-09-23 19:26:27.653] INIT: Entering runlevel: 5 [2025-09-23 19:26:27.813] mtd24 attached [2025-09-23 19:26:27.813] mtd28 attached [2025-09-23 19:26:27.829] mtd32 attached [2025-09-23 19:26:27.877] RTNETLINK answers: File exists [2025-09-23 19:26:27.877] ubi0:textures is mounted. [2025-09-23 19:26:27.944] ubi1:animations is mounted. [2025-09-23 19:26:27.944] ubi2:dml_code is mounted. [2025-09-23 19:26:27.944] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:26:27.944] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:26:27.944] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:26:27.944] data.LB_FadeInType0=100 [2025-09-23 19:26:27.944] data.CHLH_FadeInType0=0 [2025-09-23 19:26:27.944] data.WU_FadeInDelay=0 [2025-09-23 19:26:27.944] max_time_out=0 [2025-09-23 19:26:27.944] No splash screen [2025-09-23 19:26:27.944] stop dss Done [2025-09-23 19:26:27.944] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:26:27.944] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:26:28.011] /dev/mem opened. [2025-09-23 19:26:28.011] Memory mapped at address 0xffff9cc39000. [2025-09-23 19:26:28.011] Read at address 0x00600018 (0xffff9cc39018): 0x00000000 [2025-09-23 19:26:28.011] Write at address 0x00600018 (0xffff9cc39018): 0x00400040, readback 0x00400040 [2025-09-23 19:26:28.058] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:26:28.074] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:26:28.170] Loaded PowerVR consumer services. [2025-09-23 19:26:28.282] Waiting data available... [2025-09-23 19:26:28.298] 512+0 records in [2025-09-23 19:26:28.298] 512+0 records out [2025-09-23 19:26:28.346] Starting syslogd/klogd: done [2025-09-23 19:26:28.362] DML Start [2025-09-23 19:26:28.538] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:26:28.762] DML res1: 0 [2025-09-23 19:26:29.203] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:26:29.203] Read Success [2025-09-23 19:26:29.203] Verifying certificate... [2025-09-23 19:26:29.491] Verified OK [2025-09-23 19:26:29.506] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:26:31.186] Verified OK [2025-09-23 19:26:31.186] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:26:31.786] Verified OK [2025-09-23 19:26:31.786] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:26:34.345] fs.protected_hardlinks = 1 [2025-09-23 19:26:34.345] fs.protected_symlinks = 1 [2025-09-23 19:26:34.361] kernel.modules_disabled = 1 [2025-09-23 19:26:34.536] [2025-09-23 19:26:34.536] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:26:35.848] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:26:43.507] SBL1:1210.0.1.0 [2025-09-23 19:26:43.555] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:26:45.122] SBL2:1210.0.1.0 [2025-09-23 19:26:45.170] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:26:45.266] j-A [2025-09-23 19:26:52.621] The R5 Autosar Classic is running [2025-09-23 19:26:52.644] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:26:52.644] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:26:53.251] INIT: version 2.96 booting [2025-09-23 19:26:53.363] INIT: Entering runlevel: 5 [2025-09-23 19:26:53.523] mtd24 attached [2025-09-23 19:26:53.523] mtd28 attached [2025-09-23 19:26:53.539] mtd32 attached [2025-09-23 19:26:53.587] RTNETLINK answers: File exists [2025-09-23 19:26:53.587] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:26:53.628] ubi0:textures is mounted. [2025-09-23 19:26:53.628] ubi1:animations is mounted. [2025-09-23 19:26:53.628] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:26:53.628] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:26:53.628] ubi2:dml_code is mounted. [2025-09-23 19:26:53.628] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:26:53.628] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:26:53.628] data.LB_FadeInType0=100 [2025-09-23 19:26:53.649] data.CHLH_FadeInType0=0 [2025-09-23 19:26:53.649] data.WU_FadeInDelay=0 [2025-09-23 19:26:53.649] max_time_out=0 [2025-09-23 19:26:53.649] No splash screen [2025-09-23 19:26:53.649] stop dss Done [2025-09-23 19:26:53.665] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:26:53.697] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:26:53.734] /dev/mem opened. [2025-09-23 19:26:53.734] Memory mapped at address 0xffffa46b0000. [2025-09-23 19:26:53.734] Read at address 0x00600018 (0xffffa46b0018): 0x00000000 [2025-09-23 19:26:53.734] Write at address 0x00600018 (0xffffa46b0018): 0x00400040, readback 0x00400040 [2025-09-23 19:26:53.814] Loaded PowerVR consumer services. [2025-09-23 19:26:53.990] Waiting data available... [2025-09-23 19:26:54.006] 512+0 records in [2025-09-23 19:26:54.006] 512+0 records out [2025-09-23 19:26:54.038] Starting syslogd/klogd: done [2025-09-23 19:26:54.070] DML Start [2025-09-23 19:26:54.245] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:26:54.469] DML res1: 0 [2025-09-23 19:26:54.895] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:26:54.895] Read Success [2025-09-23 19:26:54.895] Verifying certificate... [2025-09-23 19:26:55.135] Verified OK [2025-09-23 19:26:55.151] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:26:56.787] Verified OK [2025-09-23 19:26:56.787] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:26:57.453] Verified OK [2025-09-23 19:26:57.453] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:27:00.028] fs.protected_hardlinks = 1 [2025-09-23 19:27:00.044] fs.protected_symlinks = 1 [2025-09-23 19:27:00.044] kernel.modules_disabled = 1 [2025-09-23 19:27:00.235] [2025-09-23 19:27:00.235] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:27:01.539] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:27:09.213] SBL1:1210.0.1.0 [2025-09-23 19:27:09.261] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:27:10.828] SBL2:1210.0.1.0 [2025-09-23 19:27:10.876] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:27:10.988] j-A [2025-09-23 19:27:18.359] The R5 Autosar Classic is running [2025-09-23 19:27:18.359] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:27:18.359] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:27:18.966] INIT: version 2.96 booting [2025-09-23 19:27:19.077] INIT: Entering runlevel: 5 [2025-09-23 19:27:19.238] mtd32 attached [2025-09-23 19:27:19.254] mtd28 attached [2025-09-23 19:27:19.254] mtd24 attached [2025-09-23 19:27:19.286] ubi0:dml_code is mounted. [2025-09-23 19:27:19.302] RTNETLINK answers: File exists [2025-09-23 19:27:19.362] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:27:19.362] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:27:19.362] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:27:19.362] ubi1:animations is mounted. [2025-09-23 19:27:19.362] ubi2:textures is mounted. [2025-09-23 19:27:19.362] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:27:19.362] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:27:19.362] data.LB_FadeInType0=100 [2025-09-23 19:27:19.362] data.CHLH_FadeInType0=0 [2025-09-23 19:27:19.362] data.WU_FadeInDelay=0 [2025-09-23 19:27:19.362] max_time_out=0 [2025-09-23 19:27:19.362] No splash screen [2025-09-23 19:27:19.362] stop dss Done [2025-09-23 19:27:19.441] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:27:19.441] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:27:19.441] /dev/mem opened. [2025-09-23 19:27:19.441] Memory mapped at address 0xffffbbef3000. [2025-09-23 19:27:19.441] Read at address 0x00600018 (0xffffbbef3018): 0x00000000 [2025-09-23 19:27:19.441] Write at address 0x00600018 (0xffffbbef3018): 0x00400040, readback 0x00400040 [2025-09-23 19:27:19.585] Loaded PowerVR consumer services. [2025-09-23 19:27:19.697] Waiting data available... [2025-09-23 19:27:19.713] 512+0 records in [2025-09-23 19:27:19.713] 512+0 records out [2025-09-23 19:27:19.761] Starting syslogd/klogd: done [2025-09-23 19:27:19.777] DML Start [2025-09-23 19:27:19.937] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:27:20.177] DML res1: 0 [2025-09-23 19:27:20.609] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:27:20.629] Read Success [2025-09-23 19:27:20.629] Verifying certificate... [2025-09-23 19:27:20.870] Verified OK [2025-09-23 19:27:20.886] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:27:22.517] Verified OK [2025-09-23 19:27:22.517] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:27:23.130] Verified OK [2025-09-23 19:27:23.130] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:27:25.801] fs.protected_hardlinks = 1 [2025-09-23 19:27:25.817] fs.protected_symlinks = 1 [2025-09-23 19:27:25.832] kernel.modules_disabled = 1 [2025-09-23 19:27:26.041] [2025-09-23 19:27:26.041] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:27:27.227] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:27:34.931] SBL1:1210.0.1.0 [2025-09-23 19:27:34.979] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:27:36.546] SBL2:1210.0.1.0 [2025-09-23 19:27:36.593] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:27:36.706] j-A [2025-09-23 19:27:44.074] The R5 Autosar Classic is running [2025-09-23 19:27:44.074] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:27:44.074] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:27:44.681] INIT: version 2.96 booting [2025-09-23 19:27:44.794] INIT: Entering runlevel: 5 [2025-09-23 19:27:44.954] mtd28 attached [2025-09-23 19:27:44.954] mtd24 attached [2025-09-23 19:27:45.001] ubi1:textures is mounted. [2025-09-23 19:27:45.001] mtd32 attached [2025-09-23 19:27:45.001] ubi0:animations is mounted. [2025-09-23 19:27:45.017] RTNETLINK answers: File exists [2025-09-23 19:27:45.059] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:27:45.059] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:27:45.059] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:27:45.059] ubi2:dml_code is mounted. [2025-09-23 19:27:45.059] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:27:45.059] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:27:45.083] data.LB_FadeInType0=100 [2025-09-23 19:27:45.083] data.CHLH_FadeInType0=0 [2025-09-23 19:27:45.083] data.WU_FadeInDelay=0 [2025-09-23 19:27:45.083] max_time_out=0 [2025-09-23 19:27:45.083] No splash screen [2025-09-23 19:27:45.083] stop dss Done [2025-09-23 19:27:45.115] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:27:45.115] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:27:45.165] /dev/mem opened. [2025-09-23 19:27:45.165] Memory mapped at address 0xffffa623d000. [2025-09-23 19:27:45.165] Read at address 0x00600018 (0xffffa623d018): 0x00000000 [2025-09-23 19:27:45.165] Write at address 0x00600018 (0xffffa623d018): 0x00400040, readback 0x00400040 [2025-09-23 19:27:45.246] Loaded PowerVR consumer services. [2025-09-23 19:27:45.421] Waiting data available... [2025-09-23 19:27:45.437] 512+0 records in [2025-09-23 19:27:45.437] 512+0 records out [2025-09-23 19:27:45.453] Starting syslogd/klogd: done [2025-09-23 19:27:45.485] DML Start [2025-09-23 19:27:45.661] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:27:45.933] DML res1: 0 [2025-09-23 19:27:46.265] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:27:46.265] Read Success [2025-09-23 19:27:46.265] Verifying certificate... [2025-09-23 19:27:46.505] Verified OK [2025-09-23 19:27:46.521] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:27:48.104] Verified OK [2025-09-23 19:27:48.121] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:27:48.712] Verified OK [2025-09-23 19:27:48.712] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:27:51.478] fs.protected_hardlinks = 1 [2025-09-23 19:27:51.478] fs.protected_symlinks = 1 [2025-09-23 19:27:51.478] kernel.modules_disabled = 1 [2025-09-23 19:27:51.669] [2025-09-23 19:27:51.669] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:27:52.977] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:28:00.652] SBL1:1210.0.1.0 [2025-09-23 19:28:00.699] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 19:28:02.266] SBL2:1210.0.1.0 [2025-09-23 19:28:02.314] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:28:02.426] j-A [2025-09-23 19:28:09.763] The R5 Autosar Classic is running [2025-09-23 19:28:09.794] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:28:09.794] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:28:10.402] INIT: version 2.96 booting [2025-09-23 19:28:10.514] INIT: Entering runlevel: 5 [2025-09-23 19:28:10.658] mtd28 attached [2025-09-23 19:28:10.674] mtd24 attached [2025-09-23 19:28:10.674] mtd32 attached [2025-09-23 19:28:10.773] ubi0:animations is mounted. [2025-09-23 19:28:10.773] RTNETLINK answers: File exists [2025-09-23 19:28:10.773] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:28:10.773] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:28:10.773] ubi1:textures is mounted. [2025-09-23 19:28:10.773] ubi2:dml_code is mounted. [2025-09-23 19:28:10.773] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:28:10.773] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:28:10.773] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:28:10.794] data.LB_FadeInType0=100 [2025-09-23 19:28:10.794] data.CHLH_FadeInType0=0 [2025-09-23 19:28:10.794] data.WU_FadeInDelay=0 [2025-09-23 19:28:10.794] max_time_out=0 [2025-09-23 19:28:10.794] No splash screen [2025-09-23 19:28:10.794] stop dss Done [2025-09-23 19:28:10.838] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:28:10.838] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:28:10.875] /dev/mem opened. [2025-09-23 19:28:10.875] Memory mapped at address 0xffffae973000. [2025-09-23 19:28:10.875] Read at address 0x00600018 (0xffffae973018): 0x00000000 [2025-09-23 19:28:10.875] Write at address 0x00600018 (0xffffae973018): 0x00400040, readback 0x00400040 [2025-09-23 19:28:11.115] Loaded PowerVR consumer services. [2025-09-23 19:28:11.187] Waiting data available... [2025-09-23 19:28:11.187] 512+0 records in [2025-09-23 19:28:11.187] 512+0 records out [2025-09-23 19:28:11.203] Starting syslogd/klogd: done [2025-09-23 19:28:11.219] DML Start [2025-09-23 19:28:11.412] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:28:11.667] DML res1: 0 [2025-09-23 19:28:12.063] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:28:12.063] Read Success [2025-09-23 19:28:12.063] Verifying certificate... [2025-09-23 19:28:12.335] Verified OK [2025-09-23 19:28:12.351] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:28:13.962] Verified OK [2025-09-23 19:28:13.962] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:28:14.583] Verified OK [2025-09-23 19:28:14.583] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:28:17.157] fs.protected_hardlinks = 1 [2025-09-23 19:28:17.157] fs.protected_symlinks = 1 [2025-09-23 19:28:17.173] kernel.modules_disabled = 1 [2025-09-23 19:28:17.364] [2025-09-23 19:28:17.364] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:28:18.721] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:28:26.390] SBL1:1210.0.1.0 [2025-09-23 19:28:26.422] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:28:28.005] SBL2:1210.0.1.0 [2025-09-23 19:28:28.037] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:28:28.148] j-A [2025-09-23 19:28:35.522] The R5 Autosar Classic is running [2025-09-23 19:28:35.522] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:28:35.522] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:28:36.130] INIT: version 2.96 booting [2025-09-23 19:28:36.241] INIT: Entering runlevel: 5 [2025-09-23 19:28:36.386] mtd24 attached [2025-09-23 19:28:36.401] mtd28 attached [2025-09-23 19:28:36.417] mtd32 attached [2025-09-23 19:28:36.465] ubi0:textures is mounted. [2025-09-23 19:28:36.465] RTNETLINK answers: File exists [2025-09-23 19:28:36.504] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:28:36.504] ubi1:animations is mounted. [2025-09-23 19:28:36.504] ubi2:dml_code is mounted. [2025-09-23 19:28:36.504] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:28:36.504] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:28:36.504] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:28:36.504] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:28:36.526] data.LB_FadeInType0=100 [2025-09-23 19:28:36.526] data.CHLH_FadeInType0=0 [2025-09-23 19:28:36.526] data.WU_FadeInDelay=0 [2025-09-23 19:28:36.526] max_time_out=0 [2025-09-23 19:28:36.526] No splash screen [2025-09-23 19:28:36.526] stop dss Done [2025-09-23 19:28:36.597] /dev/mem opened. [2025-09-23 19:28:36.597] Memory mapped at address 0xffffa5c8b000. [2025-09-23 19:28:36.597] Read at address 0x00600018 (0xffffa5c8b018): 0x00000000 [2025-09-23 19:28:36.597] Write at address 0x00600018 (0xffffa5c8b018): 0x00400040, readback 0x00400040 [2025-09-23 19:28:36.643] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:28:36.643] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:28:36.803] Loaded PowerVR consumer services. [2025-09-23 19:28:36.899] Waiting data available... [2025-09-23 19:28:36.915] 512+0 records in [2025-09-23 19:28:36.915] 512+0 records out [2025-09-23 19:28:36.947] Starting syslogd/klogd: done [2025-09-23 19:28:36.962] DML Start [2025-09-23 19:28:37.155] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:28:37.362] DML res1: 0 [2025-09-23 19:28:37.825] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:28:37.825] Read Success [2025-09-23 19:28:37.825] Verifying certificate... [2025-09-23 19:28:38.080] Verified OK [2025-09-23 19:28:38.096] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:28:39.671] Verified OK [2025-09-23 19:28:39.671] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:28:40.310] Verified OK [2025-09-23 19:28:40.310] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:28:42.980] fs.protected_hardlinks = 1 [2025-09-23 19:28:42.980] fs.protected_symlinks = 1 [2025-09-23 19:28:42.995] kernel.modules_disabled = 1 [2025-09-23 19:28:43.188] [2025-09-23 19:28:43.188] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:28:44.448] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:28:52.075] SBL1:1210.0.1.0 [2025-09-23 19:28:52.123] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:28:53.706] SBL2:1210.0.1.0 [2025-09-23 19:28:53.737] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:28:53.850] j-A [2025-09-23 19:29:01.189] The R5 Autosar Classic is running [2025-09-23 19:29:01.220] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:29:01.220] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:29:01.827] INIT: version 2.96 booting [2025-09-23 19:29:01.940] INIT: Entering runlevel: 5 [2025-09-23 19:29:02.083] mtd24 attached [2025-09-23 19:29:02.099] mtd28 attached [2025-09-23 19:29:02.115] mtd32 attached [2025-09-23 19:29:02.221] ubi0:textures is mounted. [2025-09-23 19:29:02.221] RTNETLINK answers: File exists [2025-09-23 19:29:02.221] ubi1:animations is mounted. [2025-09-23 19:29:02.221] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:29:02.221] ubi2:dml_code is mounted. [2025-09-23 19:29:02.221] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:29:02.221] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:29:02.221] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:29:02.221] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:29:02.221] data.LB_FadeInType0=100 [2025-09-23 19:29:02.221] data.CHLH_FadeInType0=0 [2025-09-23 19:29:02.221] data.WU_FadeInDelay=0 [2025-09-23 19:29:02.221] max_time_out=0 [2025-09-23 19:29:02.221] No splash screen [2025-09-23 19:29:02.221] stop dss Done [2025-09-23 19:29:02.252] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:29:02.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:29:02.299] /dev/mem opened. [2025-09-23 19:29:02.299] Memory mapped at address 0xffff87849000. [2025-09-23 19:29:02.299] Read at address 0x00600018 (0xffff87849018): 0x00000000 [2025-09-23 19:29:02.299] Write at address 0x00600018 (0xffff87849018): 0x00400040, readback 0x00400040 [2025-09-23 19:29:02.459] Loaded PowerVR consumer services. [2025-09-23 19:29:02.571] Waiting data available... [2025-09-23 19:29:02.571] 512+0 records in [2025-09-23 19:29:02.587] 512+0 records out [2025-09-23 19:29:02.619] Starting syslogd/klogd: done [2025-09-23 19:29:02.635] DML Start [2025-09-23 19:29:02.778] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:29:02.986] DML res1: 0 [2025-09-23 19:29:03.498] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:29:03.514] Read Success [2025-09-23 19:29:03.514] Verifying certificate... [2025-09-23 19:29:03.738] Verified OK [2025-09-23 19:29:03.754] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:29:05.253] Verified OK [2025-09-23 19:29:05.253] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:29:05.972] Verified OK [2025-09-23 19:29:05.972] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:29:08.641] fs.protected_hardlinks = 1 [2025-09-23 19:29:08.641] fs.protected_symlinks = 1 [2025-09-23 19:29:08.641] kernel.modules_disabled = 1 [2025-09-23 19:29:08.832] [2025-09-23 19:29:08.832] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:29:10.096] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:29:17.789] SBL1:1210.0.1.0 [2025-09-23 19:29:17.837] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:29:19.404] SBL2:1210.0.1.0 [2025-09-23 19:29:19.452] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:29:19.548] j-A [2025-09-23 19:29:26.904] The R5 Autosar Classic is running [2025-09-23 19:29:26.926] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:29:26.926] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:29:27.533] INIT: version 2.96 booting [2025-09-23 19:29:27.645] INIT: Entering runlevel: 5 [2025-09-23 19:29:27.805] mtd24 attached [2025-09-23 19:29:27.821] mtd32 attached [2025-09-23 19:29:27.837] mtd28 attached [2025-09-23 19:29:27.853] ubi0:textures is mounted. [2025-09-23 19:29:27.869] ubi1:dml_code is mounted. [2025-09-23 19:29:27.869] RTNETLINK answers: File exists [2025-09-23 19:29:27.932] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:29:27.932] ubi2:animations is mounted. [2025-09-23 19:29:27.932] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:29:27.932] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:29:27.932] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:29:27.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:29:27.932] data.LB_FadeInType0=100 [2025-09-23 19:29:27.932] data.CHLH_FadeInType0=0 [2025-09-23 19:29:27.932] data.WU_FadeInDelay=0 [2025-09-23 19:29:27.932] max_time_out=0 [2025-09-23 19:29:27.932] No splash screen [2025-09-23 19:29:27.932] stop dss Done [2025-09-23 19:29:27.980] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:29:28.018] /dev/mem opened. [2025-09-23 19:29:28.018] Memory mapped at address 0xffff89c88000. [2025-09-23 19:29:28.018] Read at address 0x00600018 (0xffff89c88018): 0x00000000 [2025-09-23 19:29:28.018] Write at address 0x00600018 (0xffff89c88018): 0x00400040, readback 0x00400040 [2025-09-23 19:29:28.018] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:29:28.162] Loaded PowerVR consumer services. [2025-09-23 19:29:28.274] Waiting data available... [2025-09-23 19:29:28.289] 512+0 records in [2025-09-23 19:29:28.289] 512+0 records out [2025-09-23 19:29:28.305] Starting syslogd/klogd: done [2025-09-23 19:29:28.321] DML Start [2025-09-23 19:29:28.514] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:29:28.738] DML res1: 0 [2025-09-23 19:29:29.168] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:29:29.168] Read Success [2025-09-23 19:29:29.168] Verifying certificate... [2025-09-23 19:29:29.392] Verified OK [2025-09-23 19:29:29.408] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:29:30.974] Verified OK [2025-09-23 19:29:30.974] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:29:31.540] Verified OK [2025-09-23 19:29:31.540] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:29:34.386] fs.protected_hardlinks = 1 [2025-09-23 19:29:34.386] fs.protected_symlinks = 1 [2025-09-23 19:29:34.402] kernel.modules_disabled = 1 [2025-09-23 19:29:34.610] [2025-09-23 19:29:34.610] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:29:35.814] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:29:43.523] SBL1:1210.0.1.0 [2025-09-23 19:29:43.571] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:29:45.138] SBL2:1210.0.1.0 [2025-09-23 19:29:45.186] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 19:29:45.298] j-A [2025-09-23 19:29:52.638] The R5 Autosar Classic is running [2025-09-23 19:29:52.663] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:29:52.663] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:29:53.270] INIT: version 2.96 booting [2025-09-23 19:29:53.382] INIT: Entering runlevel: 5 [2025-09-23 19:29:53.542] mtd24 attached [2025-09-23 19:29:53.542] mtd28 attached [2025-09-23 19:29:53.574] mtd32 attached [2025-09-23 19:29:53.590] ubi0:textures is mounted. [2025-09-23 19:29:53.606] ubi1:animations is mounted. [2025-09-23 19:29:53.606] RTNETLINK answers: File exists [2025-09-23 19:29:53.622] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:29:53.668] ubi2:dml_code is mounted. [2025-09-23 19:29:53.668] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:29:53.668] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:29:53.668] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:29:53.668] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:29:53.668] data.LB_FadeInType0=100 [2025-09-23 19:29:53.668] data.CHLH_FadeInType0=0 [2025-09-23 19:29:53.668] data.WU_FadeInDelay=0 [2025-09-23 19:29:53.668] max_time_out=0 [2025-09-23 19:29:53.668] No splash screen [2025-09-23 19:29:53.668] stop dss Done [2025-09-23 19:29:53.716] /dev/mem opened. [2025-09-23 19:29:53.716] Memory mapped at address 0xffff8f5b9000. [2025-09-23 19:29:53.742] Read at address 0x00600018 (0xffff8f5b9018): 0x00000000 [2025-09-23 19:29:53.742] Write at address 0x00600018 (0xffff8f5b9018): 0x00400040, readback 0x00400040 [2025-09-23 19:29:53.758] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:29:53.774] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:29:53.998] Loaded PowerVR consumer services. [2025-09-23 19:29:54.046] Waiting data available... [2025-09-23 19:29:54.078] 512+0 records in [2025-09-23 19:29:54.078] 512+0 records out [2025-09-23 19:29:54.110] Starting syslogd/klogd: done [2025-09-23 19:29:54.126] DML Start [2025-09-23 19:29:54.303] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:29:54.543] DML res1: 0 [2025-09-23 19:29:54.924] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:29:54.924] Read Success [2025-09-23 19:29:54.924] Verifying certificate... [2025-09-23 19:29:55.164] Verified OK [2025-09-23 19:29:55.180] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:29:56.897] Verified OK [2025-09-23 19:29:56.897] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:29:57.487] Verified OK [2025-09-23 19:29:57.487] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:29:59.997] fs.protected_hardlinks = 1 [2025-09-23 19:30:00.013] fs.protected_symlinks = 1 [2025-09-23 19:30:00.013] kernel.modules_disabled = 1 [2025-09-23 19:30:00.221] [2025-09-23 19:30:00.221] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:30:01.556] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:30:09.256] SBL1:1210.0.1.0 [2025-09-23 19:30:09.287] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:30:10.870] SBL2:1210.0.1.0 [2025-09-23 19:30:10.902] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:30:11.014] j-A [2025-09-23 19:30:18.388] The R5 Autosar Classic is running [2025-09-23 19:30:18.388] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:30:18.388] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:30:18.980] INIT: version 2.96 booting [2025-09-23 19:30:19.092] INIT: Entering runlevel: 5 [2025-09-23 19:30:19.251] mtd28 attached [2025-09-23 19:30:19.251] mtd24 attached [2025-09-23 19:30:19.283] mtd32 attached [2025-09-23 19:30:19.316] ubi1:textures is mounted. [2025-09-23 19:30:19.316] ubi0:animations is mounted. [2025-09-23 19:30:19.377] RTNETLINK answers: File exists [2025-09-23 19:30:19.377] ubi2:dml_code is mounted. [2025-09-23 19:30:19.377] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:30:19.377] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:30:19.377] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:30:19.377] data.LB_FadeInType0=100 [2025-09-23 19:30:19.377] data.CHLH_FadeInType0=0 [2025-09-23 19:30:19.377] data.WU_FadeInDelay=0 [2025-09-23 19:30:19.377] max_time_out=0 [2025-09-23 19:30:19.377] No splash screen [2025-09-23 19:30:19.377] stop dss Done [2025-09-23 19:30:19.377] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:30:19.377] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:30:19.445] /dev/mem opened. [2025-09-23 19:30:19.445] Memory mapped at address 0xffffa450f000. [2025-09-23 19:30:19.445] Read at address 0x00600018 (0xffffa450f018): 0x00000000 [2025-09-23 19:30:19.445] Write at address 0x00600018 (0xffffa450f018): 0x00400040, readback 0x00400040 [2025-09-23 19:30:19.445] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:30:19.461] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:30:19.557] Loaded PowerVR consumer services. [2025-09-23 19:30:19.717] Waiting data available... [2025-09-23 19:30:19.733] 512+0 records in [2025-09-23 19:30:19.733] 512+0 records out [2025-09-23 19:30:19.749] Starting syslogd/klogd: done [2025-09-23 19:30:19.765] DML Start [2025-09-23 19:30:19.957] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:30:20.229] DML res1: 0 [2025-09-23 19:30:20.587] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:30:20.587] Read Success [2025-09-23 19:30:20.587] Verifying certificate... [2025-09-23 19:30:20.827] Verified OK [2025-09-23 19:30:20.827] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:30:22.505] Verified OK [2025-09-23 19:30:22.505] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:30:23.159] Verified OK [2025-09-23 19:30:23.159] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:30:25.747] fs.protected_hardlinks = 1 [2025-09-23 19:30:25.747] fs.protected_symlinks = 1 [2025-09-23 19:30:25.747] kernel.modules_disabled = 1 [2025-09-23 19:30:25.923] [2025-09-23 19:30:25.923] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:30:27.270] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:30:34.973] SBL1:1210.0.1.0 [2025-09-23 19:30:35.005] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:30:36.589] SBL2:1210.0.1.0 [2025-09-23 19:30:36.620] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:30:36.732] j-A [2025-09-23 19:30:44.106] The R5 Autosar Classic is running [2025-09-23 19:30:44.106] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:30:44.106] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:30:44.714] INIT: version 2.96 booting [2025-09-23 19:30:44.825] INIT: Entering runlevel: 5 [2025-09-23 19:30:44.970] mtd28 attached [2025-09-23 19:30:44.986] mtd24 attached [2025-09-23 19:30:45.002] mtd32 attached [2025-09-23 19:30:45.110] ubi0:animations is mounted. [2025-09-23 19:30:45.110] RTNETLINK answers: File exists [2025-09-23 19:30:45.110] ubi1:textures is mounted. [2025-09-23 19:30:45.110] ubi2:dml_code is mounted. [2025-09-23 19:30:45.110] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:30:45.110] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:30:45.110] data.LB_FadeInType0=100 [2025-09-23 19:30:45.110] data.CHLH_FadeInType0=0 [2025-09-23 19:30:45.110] data.WU_FadeInDelay=0 [2025-09-23 19:30:45.110] max_time_out=0 [2025-09-23 19:30:45.110] No splash screen [2025-09-23 19:30:45.110] stop dss Done [2025-09-23 19:30:45.110] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:30:45.110] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:30:45.110] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:30:45.190] /dev/mem opened. [2025-09-23 19:30:45.190] Memory mapped at address 0xffff9592e000. [2025-09-23 19:30:45.190] Read at address 0x00600018 (0xffff9592e018): 0x00000000 [2025-09-23 19:30:45.190] Write at address 0x00600018 (0xffff9592e018): 0x00400040, readback 0x00400040 [2025-09-23 19:30:45.190] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:30:45.190] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:30:45.319] Loaded PowerVR consumer services. [2025-09-23 19:30:45.460] Waiting data available... [2025-09-23 19:30:45.460] 512+0 records in [2025-09-23 19:30:45.460] 512+0 records out [2025-09-23 19:30:45.477] Starting syslogd/klogd: done [2025-09-23 19:30:45.492] DML Start [2025-09-23 19:30:45.685] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:30:45.908] DML res1: 0 [2025-09-23 19:30:46.316] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:30:46.316] Read Success [2025-09-23 19:30:46.316] Verifying certificate... [2025-09-23 19:30:46.524] Verified OK [2025-09-23 19:30:46.540] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:30:48.082] Verified OK [2025-09-23 19:30:48.082] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:30:48.750] Verified OK [2025-09-23 19:30:48.750] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:30:51.468] fs.protected_hardlinks = 1 [2025-09-23 19:30:51.484] fs.protected_symlinks = 1 [2025-09-23 19:30:51.484] kernel.modules_disabled = 1 [2025-09-23 19:30:51.675] [2025-09-23 19:30:51.675] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:30:52.910] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:31:00.684] SBL1:1210.0.1.0 [2025-09-23 19:31:00.716] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:31:02.298] SBL2:1210.0.1.0 [2025-09-23 19:31:02.330] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:31:02.443] j-A [2025-09-23 19:31:09.815] The R5 Autosar Classic is running [2025-09-23 19:31:09.815] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:31:09.815] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:31:10.422] INIT: version 2.96 booting [2025-09-23 19:31:10.535] INIT: Entering runlevel: 5 [2025-09-23 19:31:10.678] mtd32 attached [2025-09-23 19:31:10.694] mtd24 attached [2025-09-23 19:31:10.710] mtd28 attached [2025-09-23 19:31:10.742] ubi0:dml_code is mounted. [2025-09-23 19:31:10.758] RTNETLINK answers: File exists [2025-09-23 19:31:10.758] ubi1:textures is mounted. [2025-09-23 19:31:10.820] ubi2:animations is mounted. [2025-09-23 19:31:10.820] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:31:10.820] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:31:10.820] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:31:10.820] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:31:10.820] data.LB_FadeInType0=100 [2025-09-23 19:31:10.820] data.CHLH_FadeInType0=0 [2025-09-23 19:31:10.820] data.WU_FadeInDelay=0 [2025-09-23 19:31:10.820] max_time_out=0 [2025-09-23 19:31:10.820] No splash screen [2025-09-23 19:31:10.820] stop dss Done [2025-09-23 19:31:10.820] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:31:10.893] /dev/mem opened. [2025-09-23 19:31:10.893] Memory mapped at address 0xffffa5e78000. [2025-09-23 19:31:10.893] Read at address 0x00600018 (0xffffa5e78018): 0x00000000 [2025-09-23 19:31:10.893] Write at address 0x00600018 (0xffffa5e78018): 0x00400040, readback 0x00400040 [2025-09-23 19:31:10.924] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:31:10.924] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:31:11.116] Loaded PowerVR consumer services. [2025-09-23 19:31:11.148] Waiting data available... [2025-09-23 19:31:11.164] 512+0 records in [2025-09-23 19:31:11.164] 512+0 records out [2025-09-23 19:31:11.180] Starting syslogd/klogd: done [2025-09-23 19:31:11.197] DML Start [2025-09-23 19:31:11.388] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:31:11.580] DML res1: 0 [2025-09-23 19:31:12.067] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:31:12.067] Read Success [2025-09-23 19:31:12.067] Verifying certificate... [2025-09-23 19:31:12.291] Verified OK [2025-09-23 19:31:12.307] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:31:13.996] Verified OK [2025-09-23 19:31:13.996] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:31:14.646] Verified OK [2025-09-23 19:31:14.646] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:31:17.348] fs.protected_hardlinks = 1 [2025-09-23 19:31:17.348] fs.protected_symlinks = 1 [2025-09-23 19:31:17.363] kernel.modules_disabled = 1 [2025-09-23 19:31:17.556] [2025-09-23 19:31:17.556] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:31:18.650] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:31:26.398] SBL1:1210.0.1.0 [2025-09-23 19:31:26.446] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:31:28.013] SBL2:1210.0.1.0 [2025-09-23 19:31:28.061] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:31:28.156] j-A [2025-09-23 19:31:35.510] The R5 Autosar Classic is running [2025-09-23 19:31:35.534] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:31:35.534] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:31:36.142] INIT: version 2.96 booting [2025-09-23 19:31:36.254] INIT: Entering runlevel: 5 [2025-09-23 19:31:36.398] mtd24 attached [2025-09-23 19:31:36.414] mtd28 attached [2025-09-23 19:31:36.430] mtd32 attached [2025-09-23 19:31:36.478] ubi0:textures is mounted. [2025-09-23 19:31:36.478] RTNETLINK answers: File exists [2025-09-23 19:31:36.534] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:31:36.534] ubi1:animations is mounted. [2025-09-23 19:31:36.534] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:31:36.534] ubi2:dml_code is mounted. [2025-09-23 19:31:36.534] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:31:36.534] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:31:36.534] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:31:36.534] data.LB_FadeInType0=100 [2025-09-23 19:31:36.534] data.CHLH_FadeInType0=0 [2025-09-23 19:31:36.534] data.WU_FadeInDelay=0 [2025-09-23 19:31:36.534] max_time_out=0 [2025-09-23 19:31:36.534] No splash screen [2025-09-23 19:31:36.534] stop dss Done [2025-09-23 19:31:36.600] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:31:36.600] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:31:36.600] /dev/mem opened. [2025-09-23 19:31:36.600] Memory mapped at address 0xffffac087000. [2025-09-23 19:31:36.600] Read at address 0x00600018 (0xffffac087018): 0x00000000 [2025-09-23 19:31:36.600] Write at address 0x00600018 (0xffffac087018): 0x00400040, readback 0x00400040 [2025-09-23 19:31:36.728] Loaded PowerVR consumer services. [2025-09-23 19:31:36.857] Waiting data available... [2025-09-23 19:31:36.889] 512+0 records in [2025-09-23 19:31:36.889] 512+0 records out [2025-09-23 19:31:36.937] Starting syslogd/klogd: done [2025-09-23 19:31:36.953] DML Start [2025-09-23 19:31:37.112] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:31:37.336] DML res1: 0 [2025-09-23 19:31:37.790] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:31:37.790] Read Success [2025-09-23 19:31:37.790] Verifying certificate... [2025-09-23 19:31:38.014] Verified OK [2025-09-23 19:31:38.030] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:31:39.724] Verified OK [2025-09-23 19:31:39.724] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:31:40.281] Verified OK [2025-09-23 19:31:40.281] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:31:42.775] fs.protected_hardlinks = 1 [2025-09-23 19:31:42.791] fs.protected_symlinks = 1 [2025-09-23 19:31:42.791] kernel.modules_disabled = 1 [2025-09-23 19:31:42.983] [2025-09-23 19:31:42.983] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:31:44.446] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:31:52.144] SBL1:1210.0.1.0 [2025-09-23 19:31:52.176] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:31:53.759] SBL2:1210.0.1.0 [2025-09-23 19:31:53.790] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:31:53.902] j-A [2025-09-23 19:32:01.278] The R5 Autosar Classic is running [2025-09-23 19:32:01.278] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:32:01.278] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:32:01.884] INIT: version 2.96 booting [2025-09-23 19:32:01.997] INIT: Entering runlevel: 5 [2025-09-23 19:32:02.141] mtd24 attached [2025-09-23 19:32:02.157] mtd28 attached [2025-09-23 19:32:02.173] mtd32 attached [2025-09-23 19:32:02.232] ubi1:animations is mounted. [2025-09-23 19:32:02.232] ubi0:textures is mounted. [2025-09-23 19:32:02.232] RTNETLINK answers: File exists [2025-09-23 19:32:02.232] ubi2:dml_code is mounted. [2025-09-23 19:32:02.232] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:32:02.253] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:32:02.253] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:32:02.253] data.LB_FadeInType0=100 [2025-09-23 19:32:02.279] data.CHLH_FadeInType0=0 [2025-09-23 19:32:02.279] data.WU_FadeInDelay=0 [2025-09-23 19:32:02.279] max_time_out=0 [2025-09-23 19:32:02.279] No splash screen [2025-09-23 19:32:02.279] stop dss Done [2025-09-23 19:32:02.279] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:32:02.279] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:32:02.344] /dev/mem opened. [2025-09-23 19:32:02.344] Memory mapped at address 0xffffb7fb0000. [2025-09-23 19:32:02.344] Read at address 0x00600018 (0xffffb7fb0018): 0x00000000 [2025-09-23 19:32:02.344] Write at address 0x00600018 (0xffffb7fb0018): 0x00400040, readback 0x00400040 [2025-09-23 19:32:02.360] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:32:02.376] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:32:02.600] Loaded PowerVR consumer services. [2025-09-23 19:32:02.649] Waiting data available... [2025-09-23 19:32:02.664] 512+0 records in [2025-09-23 19:32:02.664] 512+0 records out [2025-09-23 19:32:02.680] Starting syslogd/klogd: done [2025-09-23 19:32:02.712] DML Start [2025-09-23 19:32:02.872] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:32:03.095] DML res1: 0 [2025-09-23 19:32:03.587] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:32:03.587] Read Success [2025-09-23 19:32:03.587] Verifying certificate... [2025-09-23 19:32:03.906] Verified OK [2025-09-23 19:32:03.938] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:32:05.580] Verified OK [2025-09-23 19:32:05.580] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:32:06.091] Verified OK [2025-09-23 19:32:06.091] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:32:08.650] fs.protected_hardlinks = 1 [2025-09-23 19:32:08.666] fs.protected_symlinks = 1 [2025-09-23 19:32:08.666] kernel.modules_disabled = 1 [2025-09-23 19:32:08.858] [2025-09-23 19:32:08.858] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:32:10.134] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:32:17.847] SBL1:1210.0.1.0 [2025-09-23 19:32:17.895] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:32:19.462] SBL2:1210.0.1.0 [2025-09-23 19:32:19.510] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:32:19.621] j-A [2025-09-23 19:32:26.959] The R5 Autosar Classic is running [2025-09-23 19:32:26.984] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:32:26.984] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:32:27.592] INIT: version 2.96 booting [2025-09-23 19:32:27.720] INIT: Entering runlevel: 5 [2025-09-23 19:32:27.880] mtd24 attached [2025-09-23 19:32:27.880] mtd28 attached [2025-09-23 19:32:27.896] mtd32 attached [2025-09-23 19:32:27.928] ubi0:textures is mounted. [2025-09-23 19:32:27.944] RTNETLINK answers: File exists [2025-09-23 19:32:27.967] ubi2:dml_code is mounted. [2025-09-23 19:32:27.967] ubi1:animations is mounted. [2025-09-23 19:32:27.967] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:32:28.008] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:32:28.008] data.LB_FadeInType0=100 [2025-09-23 19:32:28.008] data.CHLH_FadeInType0=0 [2025-09-23 19:32:28.008] data.WU_FadeInDelay=0 [2025-09-23 19:32:28.008] max_time_out=0 [2025-09-23 19:32:28.008] No splash screen [2025-09-23 19:32:28.008] stop dss Done [2025-09-23 19:32:28.008] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:32:28.008] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:32:28.008] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:32:28.040] /dev/mem opened. [2025-09-23 19:32:28.066] Memory mapped at address 0xffff95e04000. [2025-09-23 19:32:28.066] Read at address 0x00600018 (0xffff95e04018): 0x00000000 [2025-09-23 19:32:28.066] Write at address 0x00600018 (0xffff95e04018): 0x00400040, readback 0x00400040 [2025-09-23 19:32:28.099] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:32:28.115] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:32:28.210] Loaded PowerVR consumer services. [2025-09-23 19:32:28.338] Waiting data available... [2025-09-23 19:32:28.354] 512+0 records in [2025-09-23 19:32:28.354] 512+0 records out [2025-09-23 19:32:28.402] Starting syslogd/klogd: done [2025-09-23 19:32:28.418] DML Start [2025-09-23 19:32:28.594] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:32:28.833] DML res1: 0 [2025-09-23 19:32:29.215] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:32:29.215] Read Success [2025-09-23 19:32:29.215] Verifying certificate... [2025-09-23 19:32:29.455] Verified OK [2025-09-23 19:32:29.471] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:32:31.101] Verified OK [2025-09-23 19:32:31.101] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:32:31.691] Verified OK [2025-09-23 19:32:31.691] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:32:34.425] fs.protected_hardlinks = 1 [2025-09-23 19:32:34.425] fs.protected_symlinks = 1 [2025-09-23 19:32:34.441] kernel.modules_disabled = 1 [2025-09-23 19:32:34.633] [2025-09-23 19:32:34.633] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:32:35.844] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:32:43.560] SBL1:1210.0.1.0 [2025-09-23 19:32:43.608] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:32:45.174] SBL2:1210.0.1.0 [2025-09-23 19:32:45.222] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:32:45.319] j-A [2025-09-23 19:32:52.673] The R5 Autosar Classic is running [2025-09-23 19:32:52.698] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:32:52.698] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:32:53.305] INIT: version 2.96 booting [2025-09-23 19:32:53.417] INIT: Entering runlevel: 5 [2025-09-23 19:32:53.577] mtd28 attached [2025-09-23 19:32:53.577] mtd24 attached [2025-09-23 19:32:53.593] mtd32 attached [2025-09-23 19:32:53.625] ubi0:animations is mounted. [2025-09-23 19:32:53.640] RTNETLINK answers: File exists [2025-09-23 19:32:53.677] ubi1:textures is mounted. [2025-09-23 19:32:53.677] ubi2:dml_code is mounted. [2025-09-23 19:32:53.677] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:32:53.677] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:32:53.677] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:32:53.710] data.LB_FadeInType0=100 [2025-09-23 19:32:53.710] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:32:53.710] data.CHLH_FadeInType0=0 [2025-09-23 19:32:53.710] data.WU_FadeInDelay=0 [2025-09-23 19:32:53.710] max_time_out=0 [2025-09-23 19:32:53.710] No splash screen [2025-09-23 19:32:53.710] stop dss Done [2025-09-23 19:32:53.710] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:32:53.758] /dev/mem opened. [2025-09-23 19:32:53.758] Memory mapped at address 0xffffab780000. [2025-09-23 19:32:53.784] Read at address 0x00600018 (0xffffab780018): 0x00000000 [2025-09-23 19:32:53.784] Write at address 0x00600018 (0xffffab780018): 0x00400040, readback 0x00400040 [2025-09-23 19:32:53.816] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:32:53.848] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:32:54.024] Loaded PowerVR consumer services. [2025-09-23 19:32:54.056] Waiting data available... [2025-09-23 19:32:54.056] 512+0 records in [2025-09-23 19:32:54.072] 512+0 records out [2025-09-23 19:32:54.104] Starting syslogd/klogd: done [2025-09-23 19:32:54.120] DML Start [2025-09-23 19:32:54.312] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:32:54.535] DML res1: 0 [2025-09-23 19:32:55.012] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:32:55.012] Read Success [2025-09-23 19:32:55.012] Verifying certificate... [2025-09-23 19:32:55.284] Verified OK [2025-09-23 19:32:55.300] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:32:57.054] Verified OK [2025-09-23 19:32:57.054] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:32:57.580] Verified OK [2025-09-23 19:32:57.580] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:33:00.043] fs.protected_hardlinks = 1 [2025-09-23 19:33:00.043] fs.protected_symlinks = 1 [2025-09-23 19:33:00.059] kernel.modules_disabled = 1 [2025-09-23 19:33:00.250] [2025-09-23 19:33:00.250] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:33:01.570] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:33:09.282] SBL1:1210.0.1.0 [2025-09-23 19:33:09.330] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:33:10.896] SBL2:1210.0.1.0 [2025-09-23 19:33:10.944] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:33:11.040] j-A [2025-09-23 19:33:18.395] The R5 Autosar Classic is running [2025-09-23 19:33:18.419] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:33:18.419] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:33:19.026] INIT: version 2.96 booting [2025-09-23 19:33:19.139] INIT: Entering runlevel: 5 [2025-09-23 19:33:19.298] mtd24 attached [2025-09-23 19:33:19.298] mtd32 attached [2025-09-23 19:33:19.314] mtd28 attached [2025-09-23 19:33:19.362] RTNETLINK answers: File exists [2025-09-23 19:33:19.426] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:33:19.426] ubi0:textures is mounted. [2025-09-23 19:33:19.426] ubi2:animations is mounted. [2025-09-23 19:33:19.426] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:33:19.426] ubi1:dml_code is mounted. [2025-09-23 19:33:19.426] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:33:19.426] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:33:19.426] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:33:19.426] data.LB_FadeInType0=100 [2025-09-23 19:33:19.426] data.CHLH_FadeInType0=0 [2025-09-23 19:33:19.426] data.WU_FadeInDelay=0 [2025-09-23 19:33:19.426] max_time_out=0 [2025-09-23 19:33:19.426] No splash screen [2025-09-23 19:33:19.426] stop dss Done [2025-09-23 19:33:19.474] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:33:19.508] /dev/mem opened. [2025-09-23 19:33:19.508] Memory mapped at address 0xffffb4d07000. [2025-09-23 19:33:19.508] Read at address 0x00600018 (0xffffb4d07018): 0x00000000 [2025-09-23 19:33:19.508] Write at address 0x00600018 (0xffffb4d07018): 0x00400040, readback 0x00400040 [2025-09-23 19:33:19.508] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:33:19.603] Loaded PowerVR consumer services. [2025-09-23 19:33:19.747] Waiting data available... [2025-09-23 19:33:19.763] 512+0 records in [2025-09-23 19:33:19.779] 512+0 records out [2025-09-23 19:33:19.795] Starting syslogd/klogd: done [2025-09-23 19:33:19.811] DML Start [2025-09-23 19:33:20.003] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:33:20.211] DML res1: 0 [2025-09-23 19:33:20.670] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:33:20.670] Read Success [2025-09-23 19:33:20.670] Verifying certificate... [2025-09-23 19:33:20.926] Verified OK [2025-09-23 19:33:20.942] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:33:22.732] Verified OK [2025-09-23 19:33:22.732] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:33:23.261] Verified OK [2025-09-23 19:33:23.261] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:33:25.834] fs.protected_hardlinks = 1 [2025-09-23 19:33:25.834] fs.protected_symlinks = 1 [2025-09-23 19:33:25.850] kernel.modules_disabled = 1 [2025-09-23 19:33:26.026] [2025-09-23 19:33:26.042] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:33:27.293] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:33:34.995] SBL1:1210.0.1.0 [2025-09-23 19:33:35.043] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:33:36.610] SBL2:1210.0.1.0 [2025-09-23 19:33:36.658] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:33:36.753] j-A [2025-09-23 19:33:44.109] The R5 Autosar Classic is running [2025-09-23 19:33:44.133] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:33:44.133] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:33:44.741] INIT: version 2.96 booting [2025-09-23 19:33:44.853] INIT: Entering runlevel: 5 [2025-09-23 19:33:44.997] mtd28 attached [2025-09-23 19:33:45.013] mtd24 attached [2025-09-23 19:33:45.029] mtd32 attached [2025-09-23 19:33:45.133] RTNETLINK answers: File exists [2025-09-23 19:33:45.133] ubi1:textures is mounted. [2025-09-23 19:33:45.133] ubi2:dml_code is mounted. [2025-09-23 19:33:45.133] ubi0:animations is mounted. [2025-09-23 19:33:45.133] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:33:45.133] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:33:45.133] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:33:45.133] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:33:45.133] data.LB_FadeInType0=100 [2025-09-23 19:33:45.133] data.CHLH_FadeInType0=0 [2025-09-23 19:33:45.133] data.WU_FadeInDelay=0 [2025-09-23 19:33:45.133] max_time_out=0 [2025-09-23 19:33:45.133] No splash screen [2025-09-23 19:33:45.133] stop dss Done [2025-09-23 19:33:45.133] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:33:45.200] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:33:45.200] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:33:45.200] /dev/mem opened. [2025-09-23 19:33:45.200] Memory mapped at address 0xffffa3fe0000. [2025-09-23 19:33:45.200] Read at address 0x00600018 (0xffffa3fe0018): 0x00000000 [2025-09-23 19:33:45.200] Write at address 0x00600018 (0xffffa3fe0018): 0x00400040, readback 0x00400040 [2025-09-23 19:33:45.407] Loaded PowerVR consumer services. [2025-09-23 19:33:45.487] Waiting data available... [2025-09-23 19:33:45.503] 512+0 records in [2025-09-23 19:33:45.503] 512+0 records out [2025-09-23 19:33:45.519] Starting syslogd/klogd: done [2025-09-23 19:33:45.551] DML Start [2025-09-23 19:33:45.759] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:33:45.951] DML res1: 0 [2025-09-23 19:33:46.440] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:33:46.440] Read Success [2025-09-23 19:33:46.440] Verifying certificate... [2025-09-23 19:33:46.728] Verified OK [2025-09-23 19:33:46.759] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:33:48.449] Verified OK [2025-09-23 19:33:48.449] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:33:48.973] Verified OK [2025-09-23 19:33:48.973] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:33:51.466] fs.protected_hardlinks = 1 [2025-09-23 19:33:51.466] fs.protected_symlinks = 1 [2025-09-23 19:33:51.482] kernel.modules_disabled = 1 [2025-09-23 19:33:51.658] [2025-09-23 19:33:51.658] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:33:52.974] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:34:00.730] SBL1:1210.0.1.0 [2025-09-23 19:34:00.762] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:34:02.345] SBL2:1210.0.1.0 [2025-09-23 19:34:02.377] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:34:02.490] j-A [2025-09-23 19:34:09.863] The R5 Autosar Classic is running [2025-09-23 19:34:09.863] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:34:09.863] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:34:10.471] INIT: version 2.96 booting [2025-09-23 19:34:10.583] INIT: Entering runlevel: 5 [2025-09-23 19:34:10.744] mtd24 attached [2025-09-23 19:34:10.744] mtd32 attached [2025-09-23 19:34:10.760] mtd28 attached [2025-09-23 19:34:10.791] ubi0:textures is mounted. [2025-09-23 19:34:10.807] RTNETLINK answers: File exists [2025-09-23 19:34:10.869] ubi1:dml_code is mounted. [2025-09-23 19:34:10.869] ubi2:animations is mounted. [2025-09-23 19:34:10.869] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:34:10.869] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:34:10.869] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:34:10.869] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:34:10.869] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:34:10.869] data.LB_FadeInType0=100 [2025-09-23 19:34:10.869] data.CHLH_FadeInType0=0 [2025-09-23 19:34:10.869] data.WU_FadeInDelay=0 [2025-09-23 19:34:10.869] max_time_out=0 [2025-09-23 19:34:10.869] No splash screen [2025-09-23 19:34:10.869] stop dss Done [2025-09-23 19:34:10.917] /dev/mem opened. [2025-09-23 19:34:10.958] Memory mapped at address 0xffff8e899000. [2025-09-23 19:34:10.958] Read at address 0x00600018 (0xffff8e899018): 0x00000000 [2025-09-23 19:34:10.958] Write at address 0x00600018 (0xffff8e899018): 0x00400040, readback 0x00400040 [2025-09-23 19:34:10.958] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:34:10.958] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:34:11.022] Loaded PowerVR consumer services. [2025-09-23 19:34:11.197] Waiting data available... [2025-09-23 19:34:11.229] 512+0 records in [2025-09-23 19:34:11.229] 512+0 records out [2025-09-23 19:34:11.278] Starting syslogd/klogd: done [2025-09-23 19:34:11.293] DML Start [2025-09-23 19:34:11.454] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:34:11.677] DML res1: 0 [2025-09-23 19:34:12.132] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:34:12.132] Read Success [2025-09-23 19:34:12.132] Verifying certificate... [2025-09-23 19:34:12.404] Verified OK [2025-09-23 19:34:12.420] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:34:14.131] Verified OK [2025-09-23 19:34:14.131] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:34:14.749] Verified OK [2025-09-23 19:34:14.749] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:34:17.292] fs.protected_hardlinks = 1 [2025-09-23 19:34:17.292] fs.protected_symlinks = 1 [2025-09-23 19:34:17.308] kernel.modules_disabled = 1 [2025-09-23 19:34:17.516] [2025-09-23 19:34:17.516] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:34:18.726] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:34:26.452] SBL1:1210.0.1.0 [2025-09-23 19:34:26.483] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:34:28.066] SBL2:1210.0.1.0 [2025-09-23 19:34:28.097] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:34:28.210] j-A [2025-09-23 19:34:35.585] The R5 Autosar Classic is running [2025-09-23 19:34:35.585] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:34:35.585] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:34:36.193] INIT: version 2.96 booting [2025-09-23 19:34:36.304] INIT: Entering runlevel: 5 [2025-09-23 19:34:36.464] mtd28 attached [2025-09-23 19:34:36.464] mtd24 attached [2025-09-23 19:34:36.480] mtd32 attached [2025-09-23 19:34:36.528] RTNETLINK answers: File exists [2025-09-23 19:34:36.595] ubi0:animations is mounted. [2025-09-23 19:34:36.595] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:34:36.595] ubi1:textures is mounted. [2025-09-23 19:34:36.595] ubi2:dml_code is mounted. [2025-09-23 19:34:36.595] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:34:36.595] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:34:36.595] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:34:36.595] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:34:36.595] data.LB_FadeInType0=100 [2025-09-23 19:34:36.595] data.CHLH_FadeInType0=0 [2025-09-23 19:34:36.595] data.WU_FadeInDelay=0 [2025-09-23 19:34:36.595] max_time_out=0 [2025-09-23 19:34:36.595] No splash screen [2025-09-23 19:34:36.595] stop dss Done [2025-09-23 19:34:36.627] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:34:36.643] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:34:36.675] /dev/mem opened. [2025-09-23 19:34:36.675] Memory mapped at address 0xffff8a324000. [2025-09-23 19:34:36.675] Read at address 0x00600018 (0xffff8a324018): 0x00000000 [2025-09-23 19:34:36.675] Write at address 0x00600018 (0xffff8a324018): 0x00400040, readback 0x00400040 [2025-09-23 19:34:36.755] Loaded PowerVR consumer services. [2025-09-23 19:34:36.915] Waiting data available... [2025-09-23 19:34:36.931] 512+0 records in [2025-09-23 19:34:36.931] 512+0 records out [2025-09-23 19:34:36.995] Starting syslogd/klogd: done [2025-09-23 19:34:37.011] DML Start [2025-09-23 19:34:37.187] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:34:37.411] DML res1: 0 [2025-09-23 19:34:37.872] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:34:37.872] Read Success [2025-09-23 19:34:37.872] Verifying certificate... [2025-09-23 19:34:38.097] Verified OK [2025-09-23 19:34:38.112] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:34:39.719] Verified OK [2025-09-23 19:34:39.719] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:34:40.364] Verified OK [2025-09-23 19:34:40.364] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:34:43.050] fs.protected_hardlinks = 1 [2025-09-23 19:34:43.066] fs.protected_symlinks = 1 [2025-09-23 19:34:43.066] kernel.modules_disabled = 1 [2025-09-23 19:34:43.257] [2025-09-23 19:34:43.257] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:34:44.439] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:34:52.164] SBL1:1210.0.1.0 [2025-09-23 19:34:52.195] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:34:53.778] SBL2:1210.0.1.0 [2025-09-23 19:34:53.810] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:34:53.922] j-A [2025-09-23 19:35:01.278] The R5 Autosar Classic is running [2025-09-23 19:35:01.278] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:35:01.298] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:35:01.906] INIT: version 2.96 booting [2025-09-23 19:35:02.018] INIT: Entering runlevel: 5 [2025-09-23 19:35:02.162] mtd24 attached [2025-09-23 19:35:02.178] mtd28 attached [2025-09-23 19:35:02.194] mtd32 attached [2025-09-23 19:35:02.210] ubi0:textures is mounted. [2025-09-23 19:35:02.242] RTNETLINK answers: File exists [2025-09-23 19:35:02.242] ubi1:animations is mounted. [2025-09-23 19:35:02.272] ubi2:dml_code is mounted. [2025-09-23 19:35:02.272] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:35:02.272] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:35:02.272] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:35:02.272] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:35:02.305] data.LB_FadeInType0=100 [2025-09-23 19:35:02.305] data.CHLH_FadeInType0=0 [2025-09-23 19:35:02.305] data.WU_FadeInDelay=0 [2025-09-23 19:35:02.305] max_time_out=0 [2025-09-23 19:35:02.305] No splash screen [2025-09-23 19:35:02.305] stop dss Done [2025-09-23 19:35:02.305] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:35:02.337] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:35:02.372] /dev/mem opened. [2025-09-23 19:35:02.372] Memory mapped at address 0xffff9c594000. [2025-09-23 19:35:02.372] Read at address 0x00600018 (0xffff9c594018): 0x00000000 [2025-09-23 19:35:02.372] Write at address 0x00600018 (0xffff9c594018): 0x00400040, readback 0x00400040 [2025-09-23 19:35:02.372] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:35:02.501] Loaded PowerVR consumer services. [2025-09-23 19:35:02.644] Waiting data available... [2025-09-23 19:35:02.660] 512+0 records in [2025-09-23 19:35:02.660] 512+0 records out [2025-09-23 19:35:02.692] Starting syslogd/klogd: done [2025-09-23 19:35:02.725] DML Start [2025-09-23 19:35:02.884] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:35:03.140] DML res1: 0 [2025-09-23 19:35:03.520] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:35:03.520] Read Success [2025-09-23 19:35:03.520] Verifying certificate... [2025-09-23 19:35:03.760] Verified OK [2025-09-23 19:35:03.776] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:35:05.478] Verified OK [2025-09-23 19:35:05.478] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:35:06.159] Verified OK [2025-09-23 19:35:06.159] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:35:08.749] fs.protected_hardlinks = 1 [2025-09-23 19:35:08.749] fs.protected_symlinks = 1 [2025-09-23 19:35:08.765] kernel.modules_disabled = 1 [2025-09-23 19:35:08.957] [2025-09-23 19:35:08.957] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:35:10.182] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:35:17.894] SBL1:1210.0.1.0 [2025-09-23 19:35:17.926] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:35:19.510] SBL2:1210.0.1.0 [2025-09-23 19:35:19.541] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:35:19.653] j-A [2025-09-23 19:35:27.027] The R5 Autosar Classic is running [2025-09-23 19:35:27.027] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:35:27.027] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:35:27.635] INIT: version 2.96 booting [2025-09-23 19:35:27.746] INIT: Entering runlevel: 5 [2025-09-23 19:35:27.891] mtd32 attached [2025-09-23 19:35:27.906] mtd24 attached [2025-09-23 19:35:27.906] mtd28 attached [2025-09-23 19:35:27.970] RTNETLINK answers: File exists [2025-09-23 19:35:27.970] ubi0:dml_code is mounted. [2025-09-23 19:35:28.025] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:35:28.025] ubi1:textures is mounted. [2025-09-23 19:35:28.025] ubi2:animations is mounted. [2025-09-23 19:35:28.025] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:35:28.025] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:35:28.025] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:35:28.025] data.LB_FadeInType0=100 [2025-09-23 19:35:28.025] data.CHLH_FadeInType0=0 [2025-09-23 19:35:28.025] data.WU_FadeInDelay=0 [2025-09-23 19:35:28.025] max_time_out=0 [2025-09-23 19:35:28.025] No splash screen [2025-09-23 19:35:28.025] stop dss Done [2025-09-23 19:35:28.025] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:35:28.094] /dev/mem opened. [2025-09-23 19:35:28.094] Memory mapped at address 0xffffa3d33000. [2025-09-23 19:35:28.094] Read at address 0x00600018 (0xffffa3d33018): 0x00000000 [2025-09-23 19:35:28.094] Write at address 0x00600018 (0xffffa3d33018): 0x00400040, readback 0x00400040 [2025-09-23 19:35:28.123] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:35:28.123] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:35:28.203] Loaded PowerVR consumer services. [2025-09-23 19:35:28.380] Waiting data available... [2025-09-23 19:35:28.380] 512+0 records in [2025-09-23 19:35:28.395] 512+0 records out [2025-09-23 19:35:28.427] Starting syslogd/klogd: done [2025-09-23 19:35:28.444] DML Start [2025-09-23 19:35:28.619] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:35:28.859] DML res1: 0 [2025-09-23 19:35:29.243] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:35:29.259] Read Success [2025-09-23 19:35:29.259] Verifying certificate... [2025-09-23 19:35:29.498] Verified OK [2025-09-23 19:35:29.514] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:35:31.205] Verified OK [2025-09-23 19:35:31.205] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:35:31.873] Verified OK [2025-09-23 19:35:31.873] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:35:34.511] fs.protected_hardlinks = 1 [2025-09-23 19:35:34.527] fs.protected_symlinks = 1 [2025-09-23 19:35:34.527] kernel.modules_disabled = 1 [2025-09-23 19:35:34.735] [2025-09-23 19:35:34.735] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:35:35.933] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:35:43.589] SBL1:1210.0.1.0 [2025-09-23 19:35:43.637] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:35:45.204] SBL2:1210.0.1.0 [2025-09-23 19:35:45.252] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:35:45.348] j-A [2025-09-23 19:35:52.702] The R5 Autosar Classic is running [2025-09-23 19:35:52.724] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:35:52.724] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:35:53.331] INIT: version 2.96 booting [2025-09-23 19:35:53.444] INIT: Entering runlevel: 5 [2025-09-23 19:35:53.587] mtd24 attached [2025-09-23 19:35:53.603] mtd28 attached [2025-09-23 19:35:53.619] mtd32 attached [2025-09-23 19:35:53.651] ubi0:textures is mounted. [2025-09-23 19:35:53.651] RTNETLINK answers: File exists [2025-09-23 19:35:53.725] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:35:53.725] ubi1:animations is mounted. [2025-09-23 19:35:53.725] ubi2:dml_code is mounted. [2025-09-23 19:35:53.725] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:35:53.725] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:35:53.725] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:35:53.725] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:35:53.725] data.LB_FadeInType0=100 [2025-09-23 19:35:53.725] data.CHLH_FadeInType0=0 [2025-09-23 19:35:53.725] data.WU_FadeInDelay=0 [2025-09-23 19:35:53.725] max_time_out=0 [2025-09-23 19:35:53.725] No splash screen [2025-09-23 19:35:53.725] stop dss Done [2025-09-23 19:35:53.797] /dev/mem opened. [2025-09-23 19:35:53.797] Memory mapped at address 0xffff8dfe6000. [2025-09-23 19:35:53.797] Read at address 0x00600018 (0xffff8dfe6018): 0x00000000 [2025-09-23 19:35:53.797] Write at address 0x00600018 (0xffff8dfe6018): 0x00400040, readback 0x00400040 [2025-09-23 19:35:53.797] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:35:53.797] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:35:53.925] Loaded PowerVR consumer services. [2025-09-23 19:35:54.069] Waiting data available... [2025-09-23 19:35:54.085] 512+0 records in [2025-09-23 19:35:54.085] 512+0 records out [2025-09-23 19:35:54.133] Starting syslogd/klogd: done [2025-09-23 19:35:54.149] DML Start [2025-09-23 19:35:54.309] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:35:54.549] DML res1: 0 [2025-09-23 19:35:54.947] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:35:54.947] Read Success [2025-09-23 19:35:54.947] Verifying certificate... [2025-09-23 19:35:55.203] Verified OK [2025-09-23 19:35:55.219] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:35:56.828] Verified OK [2025-09-23 19:35:56.828] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:35:57.508] Verified OK [2025-09-23 19:35:57.508] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:36:00.178] fs.protected_hardlinks = 1 [2025-09-23 19:36:00.178] fs.protected_symlinks = 1 [2025-09-23 19:36:00.194] kernel.modules_disabled = 1 [2025-09-23 19:36:00.386] [2025-09-23 19:36:00.386] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:36:01.568] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:36:09.322] SBL1:1210.0.1.0 [2025-09-23 19:36:09.354] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:36:10.936] SBL2:1210.0.1.0 [2025-09-23 19:36:10.968] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:36:11.080] j-A [2025-09-23 19:36:18.434] The R5 Autosar Classic is running [2025-09-23 19:36:18.434] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:36:18.455] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:36:19.063] INIT: version 2.96 booting [2025-09-23 19:36:19.174] INIT: Entering runlevel: 5 [2025-09-23 19:36:19.335] mtd28 attached [2025-09-23 19:36:19.335] mtd24 attached [2025-09-23 19:36:19.351] mtd32 attached [2025-09-23 19:36:19.383] ubi0:animations is mounted. [2025-09-23 19:36:19.399] ubi1:textures is mounted. [2025-09-23 19:36:19.399] RTNETLINK answers: File exists [2025-09-23 19:36:19.464] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:36:19.464] ubi2:dml_code is mounted. [2025-09-23 19:36:19.464] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:36:19.464] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:36:19.464] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:36:19.464] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:36:19.464] data.LB_FadeInType0=100 [2025-09-23 19:36:19.464] data.CHLH_FadeInType0=0 [2025-09-23 19:36:19.464] data.WU_FadeInDelay=0 [2025-09-23 19:36:19.464] max_time_out=0 [2025-09-23 19:36:19.464] No splash screen [2025-09-23 19:36:19.464] stop dss Done [2025-09-23 19:36:19.512] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:36:19.512] /dev/mem opened. [2025-09-23 19:36:19.545] Memory mapped at address 0xffff82fd3000. [2025-09-23 19:36:19.545] Read at address 0x00600018 (0xffff82fd3018): 0x00000000 [2025-09-23 19:36:19.545] Write at address 0x00600018 (0xffff82fd3018): 0x00400040, readback 0x00400040 [2025-09-23 19:36:19.545] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:36:19.769] Loaded PowerVR consumer services. [2025-09-23 19:36:19.785] Waiting data available... [2025-09-23 19:36:19.817] 512+0 records in [2025-09-23 19:36:19.817] 512+0 records out [2025-09-23 19:36:19.832] Starting syslogd/klogd: done [2025-09-23 19:36:19.848] DML Start [2025-09-23 19:36:20.041] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:36:20.280] DML res1: 0 [2025-09-23 19:36:20.704] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:36:20.704] Read Success [2025-09-23 19:36:20.704] Verifying certificate... [2025-09-23 19:36:20.928] Verified OK [2025-09-23 19:36:20.944] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:36:22.560] Verified OK [2025-09-23 19:36:22.560] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:36:23.268] Verified OK [2025-09-23 19:36:23.268] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:36:25.939] fs.protected_hardlinks = 1 [2025-09-23 19:36:25.967] fs.protected_symlinks = 1 [2025-09-23 19:36:25.967] kernel.modules_disabled = 1 [2025-09-23 19:36:26.142] [2025-09-23 19:36:26.142] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:36:27.322] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:36:35.051] SBL1:1210.0.1.0 [2025-09-23 19:36:35.099] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:36:36.666] SBL2:1210.0.1.0 [2025-09-23 19:36:36.714] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:36:36.809] j-A [2025-09-23 19:36:44.164] The R5 Autosar Classic is running [2025-09-23 19:36:44.164] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:36:44.185] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:36:44.792] INIT: version 2.96 booting [2025-09-23 19:36:44.904] INIT: Entering runlevel: 5 [2025-09-23 19:36:45.048] mtd28 attached [2025-09-23 19:36:45.064] mtd32 attached [2025-09-23 19:36:45.080] mtd24 attached [2025-09-23 19:36:45.096] ubi0:animations is mounted. [2025-09-23 19:36:45.128] RTNETLINK answers: File exists [2025-09-23 19:36:45.180] ubi2:textures is mounted. [2025-09-23 19:36:45.180] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:36:45.180] ubi1:dml_code is mounted. [2025-09-23 19:36:45.180] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:36:45.180] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:36:45.180] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:36:45.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:36:45.180] data.LB_FadeInType0=100 [2025-09-23 19:36:45.180] data.CHLH_FadeInType0=0 [2025-09-23 19:36:45.180] data.WU_FadeInDelay=0 [2025-09-23 19:36:45.180] max_time_out=0 [2025-09-23 19:36:45.180] No splash screen [2025-09-23 19:36:45.181] stop dss Done [2025-09-23 19:36:45.253] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:36:45.253] /dev/mem opened. [2025-09-23 19:36:45.253] Memory mapped at address 0xffffa3c34000. [2025-09-23 19:36:45.253] Read at address 0x00600018 (0xffffa3c34018): 0x00000000 [2025-09-23 19:36:45.253] Write at address 0x00600018 (0xffffa3c34018): 0x00400040, readback 0x00400040 [2025-09-23 19:36:45.253] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:36:45.349] Loaded PowerVR consumer services. [2025-09-23 19:36:45.524] Waiting data available... [2025-09-23 19:36:45.540] 512+0 records in [2025-09-23 19:36:45.540] 512+0 records out [2025-09-23 19:36:45.572] Starting syslogd/klogd: done [2025-09-23 19:36:45.588] DML Start [2025-09-23 19:36:45.733] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:36:45.989] DML res1: 0 [2025-09-23 19:36:46.430] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:36:46.430] Read Success [2025-09-23 19:36:46.430] Verifying certificate... [2025-09-23 19:36:46.685] Verified OK [2025-09-23 19:36:46.701] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:36:48.468] Verified OK [2025-09-23 19:36:48.468] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:36:49.026] Verified OK [2025-09-23 19:36:49.026] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:36:51.517] fs.protected_hardlinks = 1 [2025-09-23 19:36:51.517] fs.protected_symlinks = 1 [2025-09-23 19:36:51.517] kernel.modules_disabled = 1 [2025-09-23 19:36:51.693] [2025-09-23 19:36:51.693] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:36:53.031] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:37:00.780] SBL1:1210.0.1.0 [2025-09-23 19:37:00.812] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 19:37:02.395] SBL2:1210.0.1.0 [2025-09-23 19:37:02.426] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:37:02.538] j-A [2025-09-23 19:37:09.913] The R5 Autosar Classic is running [2025-09-23 19:37:09.913] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:37:09.913] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:37:10.520] INIT: version 2.96 booting [2025-09-23 19:37:10.632] INIT: Entering runlevel: 5 [2025-09-23 19:37:10.792] mtd24 attached [2025-09-23 19:37:10.792] mtd32 attached [2025-09-23 19:37:10.808] mtd28 attached [2025-09-23 19:37:10.856] RTNETLINK answers: File exists [2025-09-23 19:37:10.919] ubi0:textures is mounted. [2025-09-23 19:37:10.919] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:37:10.919] ubi1:dml_code is mounted. [2025-09-23 19:37:10.919] ubi2:animations is mounted. [2025-09-23 19:37:10.919] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:37:10.919] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:37:10.919] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:37:10.919] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:37:10.919] data.LB_FadeInType0=100 [2025-09-23 19:37:10.919] data.CHLH_FadeInType0=0 [2025-09-23 19:37:10.919] data.WU_FadeInDelay=0 [2025-09-23 19:37:10.919] max_time_out=0 [2025-09-23 19:37:10.919] No splash screen [2025-09-23 19:37:10.919] stop dss Done [2025-09-23 19:37:10.935] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:37:10.980] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:37:10.980] /dev/mem opened. [2025-09-23 19:37:10.980] Memory mapped at address 0xffff833a7000. [2025-09-23 19:37:10.980] Read at address 0x00600018 (0xffff833a7018): 0x00000000 [2025-09-23 19:37:10.980] Write at address 0x00600018 (0xffff833a7018): 0x00400040, readback 0x00400040 [2025-09-23 19:37:11.156] Loaded PowerVR consumer services. [2025-09-23 19:37:11.268] Waiting data available... [2025-09-23 19:37:11.300] 512+0 records in [2025-09-23 19:37:11.300] 512+0 records out [2025-09-23 19:37:11.300] rpmsg_char_open: _rpmsg_char_find_ctrldev failed [2025-09-23 19:37:11.321] Ipc_InitDriver: rpmsg_char_open failed, retrying... [2025-09-23 19:37:11.353] Starting syslogd/klogd: done [2025-09-23 19:37:11.369] DML Start [2025-09-23 19:37:11.561] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:37:11.752] DML res1: 0 [2025-09-23 19:37:12.209] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:37:12.209] Read Success [2025-09-23 19:37:12.209] Verifying certificate... [2025-09-23 19:37:12.464] Verified OK [2025-09-23 19:37:12.513] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:37:14.229] Verified OK [2025-09-23 19:37:14.229] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:37:14.783] Verified OK [2025-09-23 19:37:14.783] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:37:17.229] fs.protected_hardlinks = 1 [2025-09-23 19:37:17.261] fs.protected_symlinks = 1 [2025-09-23 19:37:17.261] kernel.modules_disabled = 1 [2025-09-23 19:37:17.453] [2025-09-23 19:37:17.453] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:37:18.819] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:37:26.496] SBL1:1210.0.1.0 [2025-09-23 19:37:26.544] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:37:28.111] SBL2:1210.0.1.0 [2025-09-23 19:37:28.159] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:37:28.255] j-A [2025-09-23 19:37:35.609] The R5 Autosar Classic is running [2025-09-23 19:37:35.634] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:37:35.634] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:37:36.242] INIT: version 2.96 booting [2025-09-23 19:37:36.354] INIT: Entering runlevel: 5 [2025-09-23 19:37:36.514] mtd32 attached [2025-09-23 19:37:36.514] mtd24 attached [2025-09-23 19:37:36.530] mtd28 attached [2025-09-23 19:37:36.578] ubi0:dml_code is mounted. [2025-09-23 19:37:36.578] RTNETLINK answers: File exists [2025-09-23 19:37:36.628] ubi1:textures is mounted. [2025-09-23 19:37:36.628] ubi2:animations is mounted. [2025-09-23 19:37:36.628] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:37:36.628] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:37:36.628] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:37:36.628] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:37:36.628] data.LB_FadeInType0=100 [2025-09-23 19:37:36.628] data.CHLH_FadeInType0=0 [2025-09-23 19:37:36.628] data.WU_FadeInDelay=0 [2025-09-23 19:37:36.628] max_time_out=0 [2025-09-23 19:37:36.628] No splash screen [2025-09-23 19:37:36.628] stop dss Done [2025-09-23 19:37:36.628] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:37:36.698] /dev/mem opened. [2025-09-23 19:37:36.698] Memory mapped at address 0xffffb84cd000. [2025-09-23 19:37:36.698] Read at address 0x00600018 (0xffffb84cd018): 0x00000000 [2025-09-23 19:37:36.698] Write at address 0x00600018 (0xffffb84cd018): 0x00400040, readback 0x00400040 [2025-09-23 19:37:36.714] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:37:36.730] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:37:36.842] Loaded PowerVR consumer services. [2025-09-23 19:37:36.969] Waiting data available... [2025-09-23 19:37:37.017] 512+0 records in [2025-09-23 19:37:37.017] 512+0 records out [2025-09-23 19:37:37.065] Starting syslogd/klogd: done [2025-09-23 19:37:37.081] DML Start [2025-09-23 19:37:37.258] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:37:37.449] DML res1: 0 [2025-09-23 19:37:37.864] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:37:37.885] Read Success [2025-09-23 19:37:37.885] Verifying certificate... [2025-09-23 19:37:38.173] Verified OK [2025-09-23 19:37:38.189] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:37:39.803] Verified OK [2025-09-23 19:37:39.803] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:37:40.441] Verified OK [2025-09-23 19:37:40.441] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:37:42.998] fs.protected_hardlinks = 1 [2025-09-23 19:37:42.998] fs.protected_symlinks = 1 [2025-09-23 19:37:43.014] kernel.modules_disabled = 1 [2025-09-23 19:37:43.206] [2025-09-23 19:37:43.206] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:37:44.512] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:37:52.215] SBL1:1210.0.1.0 [2025-09-23 19:37:52.247] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:37:53.830] SBL2:1210.0.1.0 [2025-09-23 19:37:53.862] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:37:53.974] j-A [2025-09-23 19:38:01.346] The R5 Autosar Classic is running [2025-09-23 19:38:01.346] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:38:01.346] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:38:01.953] INIT: version 2.96 booting [2025-09-23 19:38:02.066] INIT: Entering runlevel: 5 [2025-09-23 19:38:02.210] mtd28 attached [2025-09-23 19:38:02.226] mtd32 attached [2025-09-23 19:38:02.242] mtd24 attached [2025-09-23 19:38:02.290] RTNETLINK answers: File exists [2025-09-23 19:38:02.290] ubi0:animations is mounted. [2025-09-23 19:38:02.334] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:38:02.334] ubi1:dml_code is mounted. [2025-09-23 19:38:02.334] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:38:02.334] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:38:02.334] ubi2:textures is mounted. [2025-09-23 19:38:02.334] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:38:02.334] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:38:02.356] data.LB_FadeInType0=100 [2025-09-23 19:38:02.356] data.CHLH_FadeInType0=0 [2025-09-23 19:38:02.356] data.WU_FadeInDelay=0 [2025-09-23 19:38:02.356] max_time_out=0 [2025-09-23 19:38:02.356] No splash screen [2025-09-23 19:38:02.356] stop dss Done [2025-09-23 19:38:02.372] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:38:02.388] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:38:02.440] /dev/mem opened. [2025-09-23 19:38:02.440] Memory mapped at address 0xffff96312000. [2025-09-23 19:38:02.440] Read at address 0x00600018 (0xffff96312018): 0x00000000 [2025-09-23 19:38:02.440] Write at address 0x00600018 (0xffff96312018): 0x00400040, readback 0x00400040 [2025-09-23 19:38:02.648] Loaded PowerVR consumer services. [2025-09-23 19:38:02.695] Waiting data available... [2025-09-23 19:38:02.711] 512+0 records in [2025-09-23 19:38:02.711] 512+0 records out [2025-09-23 19:38:02.759] Starting syslogd/klogd: done [2025-09-23 19:38:02.775] DML Start [2025-09-23 19:38:02.967] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:38:03.175] DML res1: 0 [2025-09-23 19:38:03.618] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:38:03.618] Read Success [2025-09-23 19:38:03.618] Verifying certificate... [2025-09-23 19:38:03.843] Verified OK [2025-09-23 19:38:03.858] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:38:05.425] Verified OK [2025-09-23 19:38:05.425] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:38:06.128] Verified OK [2025-09-23 19:38:06.128] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:38:08.814] fs.protected_hardlinks = 1 [2025-09-23 19:38:08.814] fs.protected_symlinks = 1 [2025-09-23 19:38:08.830] kernel.modules_disabled = 1 [2025-09-23 19:38:09.022] [2025-09-23 19:38:09.022] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:38:10.280] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:38:17.925] SBL1:1210.0.1.0 [2025-09-23 19:38:17.957] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:38:19.539] SBL2:1210.0.1.0 [2025-09-23 19:38:19.571] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:38:19.683] j-A [2025-09-23 19:38:27.056] The R5 Autosar Classic is running [2025-09-23 19:38:27.056] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:38:27.056] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:38:27.664] INIT: version 2.96 booting [2025-09-23 19:38:27.776] INIT: Entering runlevel: 5 [2025-09-23 19:38:27.919] mtd24 attached [2025-09-23 19:38:27.951] mtd32 attached [2025-09-23 19:38:27.951] mtd28 attached [2025-09-23 19:38:27.967] ubi0:textures is mounted. [2025-09-23 19:38:27.999] RTNETLINK answers: File exists [2025-09-23 19:38:27.999] ubi1:dml_code is mounted. [2025-09-23 19:38:28.039] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:38:28.039] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:38:28.039] ubi2:animations is mounted. [2025-09-23 19:38:28.039] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:38:28.039] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:38:28.039] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:38:28.062] data.LB_FadeInType0=100 [2025-09-23 19:38:28.062] data.CHLH_FadeInType0=0 [2025-09-23 19:38:28.062] data.WU_FadeInDelay=0 [2025-09-23 19:38:28.062] max_time_out=0 [2025-09-23 19:38:28.062] No splash screen [2025-09-23 19:38:28.062] stop dss Done [2025-09-23 19:38:28.078] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:38:28.101] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:38:28.136] /dev/mem opened. [2025-09-23 19:38:28.136] Memory mapped at address 0xffff8e655000. [2025-09-23 19:38:28.136] Read at address 0x00600018 (0xffff8e655018): 0x00000000 [2025-09-23 19:38:28.136] Write at address 0x00600018 (0xffff8e655018): 0x00400040, readback 0x00400040 [2025-09-23 19:38:28.280] Loaded PowerVR consumer services. [2025-09-23 19:38:28.391] Waiting data available... [2025-09-23 19:38:28.424] 512+0 records in [2025-09-23 19:38:28.424] 512+0 records out [2025-09-23 19:38:28.440] Starting syslogd/klogd: done [2025-09-23 19:38:28.456] DML Start [2025-09-23 19:38:28.632] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:38:28.872] DML res1: 0 [2025-09-23 19:38:29.269] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:38:29.269] Read Success [2025-09-23 19:38:29.269] Verifying certificate... [2025-09-23 19:38:29.541] Verified OK [2025-09-23 19:38:29.557] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:38:31.170] Verified OK [2025-09-23 19:38:31.170] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:38:31.852] Verified OK [2025-09-23 19:38:31.852] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:38:34.569] fs.protected_hardlinks = 1 [2025-09-23 19:38:34.569] fs.protected_symlinks = 1 [2025-09-23 19:38:34.585] kernel.modules_disabled = 1 [2025-09-23 19:38:34.777] [2025-09-23 19:38:34.777] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:38:35.904] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:38:43.631] SBL1:1210.0.1.0 [2025-09-23 19:38:43.663] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:38:45.246] SBL2:1210.0.1.0 [2025-09-23 19:38:45.294] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:38:45.391] j-A [2025-09-23 19:38:52.746] The R5 Autosar Classic is running [2025-09-23 19:38:52.746] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:38:52.767] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:38:53.375] INIT: version 2.96 booting [2025-09-23 19:38:53.487] INIT: Entering runlevel: 5 [2025-09-23 19:38:53.630] mtd28 attached [2025-09-23 19:38:53.646] mtd24 attached [2025-09-23 19:38:53.662] mtd32 attached [2025-09-23 19:38:53.720] ubi1:textures is mounted. [2025-09-23 19:38:53.720] ubi0:animations is mounted. [2025-09-23 19:38:53.720] RTNETLINK answers: File exists [2025-09-23 19:38:53.720] ubi2:dml_code is mounted. [2025-09-23 19:38:53.775] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:38:53.775] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:38:53.775] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:38:53.775] data.LB_FadeInType0=100 [2025-09-23 19:38:53.775] data.CHLH_FadeInType0=0 [2025-09-23 19:38:53.775] data.WU_FadeInDelay=0 [2025-09-23 19:38:53.775] max_time_out=0 [2025-09-23 19:38:53.775] No splash screen [2025-09-23 19:38:53.775] stop dss Done [2025-09-23 19:38:53.775] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:38:53.775] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:38:53.829] /dev/mem opened. [2025-09-23 19:38:53.829] Memory mapped at address 0xffffadb1b000. [2025-09-23 19:38:53.829] Read at address 0x00600018 (0xffffadb1b018): 0x00000000 [2025-09-23 19:38:53.829] Write at address 0x00600018 (0xffffadb1b018): 0x00400040, readback 0x00400040 [2025-09-23 19:38:53.852] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:38:53.852] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:38:53.980] Loaded PowerVR consumer services. [2025-09-23 19:38:54.108] Waiting data available... [2025-09-23 19:38:54.124] 512+0 records in [2025-09-23 19:38:54.124] 512+0 records out [2025-09-23 19:38:54.172] Starting syslogd/klogd: done [2025-09-23 19:38:54.189] DML Start [2025-09-23 19:38:54.348] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:38:54.572] DML res1: 0 [2025-09-23 19:38:55.019] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:38:55.040] Read Success [2025-09-23 19:38:55.040] Verifying certificate... [2025-09-23 19:38:55.265] Verified OK [2025-09-23 19:38:55.280] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:38:56.991] Verified OK [2025-09-23 19:38:56.991] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:38:57.576] Verified OK [2025-09-23 19:38:57.576] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:39:00.134] fs.protected_hardlinks = 1 [2025-09-23 19:39:00.134] fs.protected_symlinks = 1 [2025-09-23 19:39:00.134] kernel.modules_disabled = 1 [2025-09-23 19:39:00.341] [2025-09-23 19:39:00.341] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:39:01.675] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:39:09.347] SBL1:1210.0.1.0 [2025-09-23 19:39:09.395] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:39:10.962] SBL2:1210.0.1.0 [2025-09-23 19:39:11.010] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:39:11.122] j-A [2025-09-23 19:39:18.461] The R5 Autosar Classic is running [2025-09-23 19:39:18.486] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:39:18.486] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:39:19.094] INIT: version 2.96 booting [2025-09-23 19:39:19.206] INIT: Entering runlevel: 5 [2025-09-23 19:39:19.366] mtd24 attached [2025-09-23 19:39:19.366] mtd28 attached [2025-09-23 19:39:19.382] mtd32 attached [2025-09-23 19:39:19.430] ubi0:textures is mounted. [2025-09-23 19:39:19.464] ubi1:animations is mounted. [2025-09-23 19:39:19.464] RTNETLINK answers: File exists [2025-09-23 19:39:19.464] ubi2:dml_code is mounted. [2025-09-23 19:39:19.464] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:39:19.464] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:39:19.464] data.LB_FadeInType0=100 [2025-09-23 19:39:19.489] data.CHLH_FadeInType0=0 [2025-09-23 19:39:19.489] data.WU_FadeInDelay=0 [2025-09-23 19:39:19.489] max_time_out=0 [2025-09-23 19:39:19.489] No splash screen [2025-09-23 19:39:19.489] stop dss Done [2025-09-23 19:39:19.489] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:39:19.489] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:39:19.505] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:39:19.569] /dev/mem opened. [2025-09-23 19:39:19.569] Memory mapped at address 0xffffaf077000. [2025-09-23 19:39:19.569] Read at address 0x00600018 (0xffffaf077018): 0x00000000 [2025-09-23 19:39:19.569] Write at address 0x00600018 (0xffffaf077018): 0x00400040, readback 0x00400040 [2025-09-23 19:39:19.569] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:39:19.592] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:39:19.657] Loaded PowerVR consumer services. [2025-09-23 19:39:19.832] Waiting data available... [2025-09-23 19:39:19.832] 512+0 records in [2025-09-23 19:39:19.848] 512+0 records out [2025-09-23 19:39:19.880] Starting syslogd/klogd: done [2025-09-23 19:39:19.912] DML Start [2025-09-23 19:39:20.040] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:39:20.296] DML res1: 0 [2025-09-23 19:39:20.727] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:39:20.743] Read Success [2025-09-23 19:39:20.743] Verifying certificate... [2025-09-23 19:39:21.000] Verified OK [2025-09-23 19:39:21.016] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:39:22.611] Verified OK [2025-09-23 19:39:22.611] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:39:23.200] Verified OK [2025-09-23 19:39:23.200] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:39:25.869] fs.protected_hardlinks = 1 [2025-09-23 19:39:25.869] fs.protected_symlinks = 1 [2025-09-23 19:39:25.885] kernel.modules_disabled = 1 [2025-09-23 19:39:26.061] [2025-09-23 19:39:26.061] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:39:27.375] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:39:35.104] SBL1:1210.0.1.0 [2025-09-23 19:39:35.151] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:39:36.718] SBL2:1210.0.1.0 [2025-09-23 19:39:36.766] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 19:39:36.861] j-A [2025-09-23 19:39:44.217] The R5 Autosar Classic is running [2025-09-23 19:39:44.240] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:39:44.240] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:39:44.848] INIT: version 2.96 booting [2025-09-23 19:39:44.959] INIT: Entering runlevel: 5 [2025-09-23 19:39:45.120] mtd24 attached [2025-09-23 19:39:45.136] mtd32 attached [2025-09-23 19:39:45.136] mtd28 attached [2025-09-23 19:39:45.168] ubi0:textures is mounted. [2025-09-23 19:39:45.200] ubi1:dml_code is mounted. [2025-09-23 19:39:45.200] RTNETLINK answers: File exists [2025-09-23 19:39:45.256] ubi2:animations is mounted. [2025-09-23 19:39:45.256] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:39:45.256] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:39:45.256] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:39:45.256] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:39:45.256] data.LB_FadeInType0=100 [2025-09-23 19:39:45.256] data.CHLH_FadeInType0=0 [2025-09-23 19:39:45.256] data.WU_FadeInDelay=0 [2025-09-23 19:39:45.256] max_time_out=0 [2025-09-23 19:39:45.256] No splash screen [2025-09-23 19:39:45.256] stop dss Done [2025-09-23 19:39:45.256] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:39:45.304] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:39:45.338] /dev/mem opened. [2025-09-23 19:39:45.338] Memory mapped at address 0xffff9b1fb000. [2025-09-23 19:39:45.338] Read at address 0x00600018 (0xffff9b1fb018): 0x00000000 [2025-09-23 19:39:45.338] Write at address 0x00600018 (0xffff9b1fb018): 0x00400040, readback 0x00400040 [2025-09-23 19:39:45.338] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:39:45.482] Loaded PowerVR consumer services. [2025-09-23 19:39:45.594] Waiting data available... [2025-09-23 19:39:45.610] 512+0 records in [2025-09-23 19:39:45.610] 512+0 records out [2025-09-23 19:39:45.642] Starting syslogd/klogd: done [2025-09-23 19:39:45.658] DML Start [2025-09-23 19:39:45.818] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:39:45.994] DML res1: 0 [2025-09-23 19:39:46.516] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:39:46.516] Read Success [2025-09-23 19:39:46.516] Verifying certificate... [2025-09-23 19:39:46.740] Verified OK [2025-09-23 19:39:46.756] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:39:48.435] Verified OK [2025-09-23 19:39:48.435] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:39:49.058] Verified OK [2025-09-23 19:39:49.058] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:39:51.729] fs.protected_hardlinks = 1 [2025-09-23 19:39:51.756] fs.protected_symlinks = 1 [2025-09-23 19:39:51.756] kernel.modules_disabled = 1 [2025-09-23 19:39:51.932] [2025-09-23 19:39:51.932] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:39:53.064] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:40:00.848] SBL1:1210.0.1.0 [2025-09-23 19:40:00.895] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:40:02.463] SBL2:1210.0.1.0 [2025-09-23 19:40:02.510] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:40:02.622] j-A [2025-09-23 19:40:09.960] The R5 Autosar Classic is running [2025-09-23 19:40:09.992] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:40:09.992] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:40:10.599] INIT: version 2.96 booting [2025-09-23 19:40:10.711] INIT: Entering runlevel: 5 [2025-09-23 19:40:10.855] mtd28 attached [2025-09-23 19:40:10.871] mtd32 attached [2025-09-23 19:40:10.887] mtd24 attached [2025-09-23 19:40:10.918] ubi0:animations is mounted. [2025-09-23 19:40:10.934] RTNETLINK answers: File exists [2025-09-23 19:40:10.997] ubi2:textures is mounted. [2025-09-23 19:40:10.997] ubi1:dml_code is mounted. [2025-09-23 19:40:10.997] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:40:10.997] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:40:10.997] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:40:10.997] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:40:10.997] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:40:10.997] data.LB_FadeInType0=100 [2025-09-23 19:40:10.997] data.CHLH_FadeInType0=0 [2025-09-23 19:40:10.997] data.WU_FadeInDelay=0 [2025-09-23 19:40:10.997] max_time_out=0 [2025-09-23 19:40:10.997] No splash screen [2025-09-23 19:40:10.997] stop dss Done [2025-09-23 19:40:11.077] /dev/mem opened. [2025-09-23 19:40:11.077] Memory mapped at address 0xffffa1a3d000. [2025-09-23 19:40:11.077] Read at address 0x00600018 (0xffffa1a3d018): 0x00000000 [2025-09-23 19:40:11.077] Write at address 0x00600018 (0xffffa1a3d018): 0x00400040, readback 0x00400040 [2025-09-23 19:40:11.077] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:40:11.077] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:40:11.268] Loaded PowerVR consumer services. [2025-09-23 19:40:11.365] Waiting data available... [2025-09-23 19:40:11.397] 512+0 records in [2025-09-23 19:40:11.397] 512+0 records out [2025-09-23 19:40:11.427] _rpmsg_char_get_local_endpt: rpmsg0 realpath failed [2025-09-23 19:40:11.427] rpmsg_char_open: _rpmsg_char_open_eptdev failed [2025-09-23 19:40:11.427] Ipc_InitDriver: rpmsg_char_open failed, retrying... [2025-09-23 19:40:11.427] Starting syslogd/klogd: done [2025-09-23 19:40:11.442] DML Start [2025-09-23 19:40:11.635] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:40:11.842] DML res1: 0 [2025-09-23 19:40:12.255] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:40:12.255] Read Success [2025-09-23 19:40:12.255] Verifying certificate... [2025-09-23 19:40:12.494] Verified OK [2025-09-23 19:40:12.527] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:40:14.230] Verified OK [2025-09-23 19:40:14.230] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:40:14.797] Verified OK [2025-09-23 19:40:14.797] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:40:17.243] fs.protected_hardlinks = 1 [2025-09-23 19:40:17.259] fs.protected_symlinks = 1 [2025-09-23 19:40:17.259] kernel.modules_disabled = 1 [2025-09-23 19:40:17.467] [2025-09-23 19:40:17.467] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:40:18.869] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:40:26.578] SBL1:1210.0.1.0 [2025-09-23 19:40:26.609] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:40:28.192] SBL2:1210.0.1.0 [2025-09-23 19:40:28.240] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:40:28.336] j-A [2025-09-23 19:40:35.689] The R5 Autosar Classic is running [2025-09-23 19:40:35.710] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:40:35.710] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:40:36.318] INIT: version 2.96 booting [2025-09-23 19:40:36.430] INIT: Entering runlevel: 5 [2025-09-23 19:40:36.589] mtd28 attached [2025-09-23 19:40:36.606] mtd32 attached [2025-09-23 19:40:36.606] mtd24 attached [2025-09-23 19:40:36.654] ubi0:animations is mounted. [2025-09-23 19:40:36.654] RTNETLINK answers: File exists [2025-09-23 19:40:36.703] ubi2:textures is mounted. [2025-09-23 19:40:36.703] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:40:36.703] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:40:36.703] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:40:36.703] ubi1:dml_code is mounted. [2025-09-23 19:40:36.703] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:40:36.703] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:40:36.727] data.LB_FadeInType0=100 [2025-09-23 19:40:36.727] data.CHLH_FadeInType0=0 [2025-09-23 19:40:36.727] data.WU_FadeInDelay=0 [2025-09-23 19:40:36.727] max_time_out=0 [2025-09-23 19:40:36.727] No splash screen [2025-09-23 19:40:36.727] stop dss Done [2025-09-23 19:40:36.743] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:40:36.764] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:40:36.803] /dev/mem opened. [2025-09-23 19:40:36.803] Memory mapped at address 0xffffa5d98000. [2025-09-23 19:40:36.803] Read at address 0x00600018 (0xffffa5d98018): 0x00000000 [2025-09-23 19:40:36.803] Write at address 0x00600018 (0xffffa5d98018): 0x00400040, readback 0x00400040 [2025-09-23 19:40:36.898] Loaded PowerVR consumer services. [2025-09-23 19:40:37.072] Waiting data available... [2025-09-23 19:40:37.072] 512+0 records in [2025-09-23 19:40:37.072] 512+0 records out [2025-09-23 19:40:37.088] Starting syslogd/klogd: done [2025-09-23 19:40:37.120] DML Start [2025-09-23 19:40:37.280] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:40:37.471] DML res1: 0 [2025-09-23 19:40:37.993] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:40:37.993] Read Success [2025-09-23 19:40:37.993] Verifying certificate... [2025-09-23 19:40:38.232] Verified OK [2025-09-23 19:40:38.264] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:40:39.988] Verified OK [2025-09-23 19:40:39.988] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:40:40.545] Verified OK [2025-09-23 19:40:40.545] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:40:43.087] fs.protected_hardlinks = 1 [2025-09-23 19:40:43.087] fs.protected_symlinks = 1 [2025-09-23 19:40:43.103] kernel.modules_disabled = 1 [2025-09-23 19:40:43.280] [2025-09-23 19:40:43.280] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:40:44.552] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:40:52.304] SBL1:1210.0.1.0 [2025-09-23 19:40:52.352] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:40:53.919] SBL2:1210.0.1.0 [2025-09-23 19:40:53.967] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:40:54.063] j-A [2025-09-23 19:41:01.416] The R5 Autosar Classic is running [2025-09-23 19:41:01.441] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:41:01.441] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:41:02.049] INIT: version 2.96 booting [2025-09-23 19:41:02.161] INIT: Entering runlevel: 5 [2025-09-23 19:41:02.321] mtd24 attached [2025-09-23 19:41:02.321] mtd32 attached [2025-09-23 19:41:02.337] mtd28 attached [2025-09-23 19:41:02.385] RTNETLINK answers: File exists [2025-09-23 19:41:02.385] ubi0:textures is mounted. [2025-09-23 19:41:02.440] ubi1:dml_code is mounted. [2025-09-23 19:41:02.440] ubi2:animations is mounted. [2025-09-23 19:41:02.440] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:41:02.440] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:41:02.440] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:41:02.440] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:41:02.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:41:02.440] data.LB_FadeInType0=100 [2025-09-23 19:41:02.440] data.CHLH_FadeInType0=0 [2025-09-23 19:41:02.440] data.WU_FadeInDelay=0 [2025-09-23 19:41:02.440] max_time_out=0 [2025-09-23 19:41:02.440] No splash screen [2025-09-23 19:41:02.440] stop dss Done [2025-09-23 19:41:02.471] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:41:02.487] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:41:02.487] /dev/mem opened. [2025-09-23 19:41:02.519] Memory mapped at address 0xffffa794e000. [2025-09-23 19:41:02.519] Read at address 0x00600018 (0xffffa794e018): 0x00000000 [2025-09-23 19:41:02.519] Write at address 0x00600018 (0xffffa794e018): 0x00400040, readback 0x00400040 [2025-09-23 19:41:02.648] Loaded PowerVR consumer services. [2025-09-23 19:41:02.791] Waiting data available... [2025-09-23 19:41:02.807] 512+0 records in [2025-09-23 19:41:02.807] 512+0 records out [2025-09-23 19:41:02.839] Starting syslogd/klogd: done [2025-09-23 19:41:02.855] DML Start [2025-09-23 19:41:03.063] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:41:03.255] DML res1: 0 [2025-09-23 19:41:03.699] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:41:03.699] Read Success [2025-09-23 19:41:03.699] Verifying certificate... [2025-09-23 19:41:04.004] Verified OK [2025-09-23 19:41:04.020] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:41:05.793] Verified OK [2025-09-23 19:41:05.793] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:41:06.344] Verified OK [2025-09-23 19:41:06.344] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:41:08.823] fs.protected_hardlinks = 1 [2025-09-23 19:41:08.823] fs.protected_symlinks = 1 [2025-09-23 19:41:08.823] kernel.modules_disabled = 1 [2025-09-23 19:41:09.031] [2025-09-23 19:41:09.031] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:41:10.277] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:41:18.032] SBL1:1210.0.1.0 [2025-09-23 19:41:18.063] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:41:19.646] SBL2:1210.0.1.0 [2025-09-23 19:41:19.677] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 19:41:19.790] j-A [2025-09-23 19:41:27.144] The R5 Autosar Classic is running [2025-09-23 19:41:27.144] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:41:27.165] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:41:27.772] INIT: version 2.96 booting [2025-09-23 19:41:27.884] INIT: Entering runlevel: 5 [2025-09-23 19:41:28.044] mtd32 attached [2025-09-23 19:41:28.044] mtd28 attached [2025-09-23 19:41:28.060] mtd24 attached [2025-09-23 19:41:28.108] RTNETLINK answers: File exists [2025-09-23 19:41:28.108] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:41:28.149] ubi0:dml_code is mounted. [2025-09-23 19:41:28.149] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:41:28.149] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:41:28.149] ubi2:textures is mounted. [2025-09-23 19:41:28.149] ubi1:animations is mounted. [2025-09-23 19:41:28.149] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:41:28.149] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:41:28.170] data.LB_FadeInType0=100 [2025-09-23 19:41:28.170] data.CHLH_FadeInType0=0 [2025-09-23 19:41:28.170] data.WU_FadeInDelay=0 [2025-09-23 19:41:28.170] max_time_out=0 [2025-09-23 19:41:28.170] No splash screen [2025-09-23 19:41:28.170] stop dss Done [2025-09-23 19:41:28.186] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:41:28.186] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:41:28.217] /dev/mem opened. [2025-09-23 19:41:28.217] Memory mapped at address 0xffffbaefc000. [2025-09-23 19:41:28.243] Read at address 0x00600018 (0xffffbaefc018): 0x00000000 [2025-09-23 19:41:28.243] Write at address 0x00600018 (0xffffbaefc018): 0x00400040, readback 0x00400040 [2025-09-23 19:41:28.323] Loaded PowerVR consumer services. [2025-09-23 19:41:28.500] Waiting data available... [2025-09-23 19:41:28.516] 512+0 records in [2025-09-23 19:41:28.516] 512+0 records out [2025-09-23 19:41:28.580] Starting syslogd/klogd: done [2025-09-23 19:41:28.595] DML Start [2025-09-23 19:41:28.771] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:41:29.011] DML res1: 0 [2025-09-23 19:41:29.395] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:41:29.416] Read Success [2025-09-23 19:41:29.416] Verifying certificate... [2025-09-23 19:41:29.688] Verified OK [2025-09-23 19:41:29.688] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:41:31.330] Verified OK [2025-09-23 19:41:31.330] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:41:31.936] Verified OK [2025-09-23 19:41:31.936] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:41:34.543] fs.protected_hardlinks = 1 [2025-09-23 19:41:34.558] fs.protected_symlinks = 1 [2025-09-23 19:41:34.558] kernel.modules_disabled = 1 [2025-09-23 19:41:34.766] [2025-09-23 19:41:34.766] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:41:36.107] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:41:43.753] SBL1:1210.0.1.0 [2025-09-23 19:41:43.785] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:41:45.367] SBL2:1210.0.1.0 [2025-09-23 19:41:45.415] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:41:45.512] j-A [2025-09-23 19:41:52.866] The R5 Autosar Classic is running [2025-09-23 19:41:52.866] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:41:52.887] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:41:53.494] INIT: version 2.96 booting [2025-09-23 19:41:53.607] INIT: Entering runlevel: 5 [2025-09-23 19:41:53.750] mtd24 attached [2025-09-23 19:41:53.766] mtd32 attached [2025-09-23 19:41:53.782] mtd28 attached [2025-09-23 19:41:53.814] ubi0:textures is mounted. [2025-09-23 19:41:53.830] RTNETLINK answers: File exists [2025-09-23 19:41:53.883] ubi2:animations is mounted. [2025-09-23 19:41:53.883] ubi1:dml_code is mounted. [2025-09-23 19:41:53.883] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:41:53.883] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:41:53.883] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:41:53.883] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:41:53.883] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:41:53.883] data.LB_FadeInType0=100 [2025-09-23 19:41:53.883] data.CHLH_FadeInType0=0 [2025-09-23 19:41:53.883] data.WU_FadeInDelay=0 [2025-09-23 19:41:53.883] max_time_out=0 [2025-09-23 19:41:53.883] No splash screen [2025-09-23 19:41:53.883] stop dss Done [2025-09-23 19:41:53.931] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:41:53.970] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:41:53.970] /dev/mem opened. [2025-09-23 19:41:53.970] Memory mapped at address 0xffffbdcbd000. [2025-09-23 19:41:53.970] Read at address 0x00600018 (0xffffbdcbd018): 0x00000000 [2025-09-23 19:41:53.970] Write at address 0x00600018 (0xffffbdcbd018): 0x00400040, readback 0x00400040 [2025-09-23 19:41:54.146] Loaded PowerVR consumer services. [2025-09-23 19:41:54.242] Waiting data available... [2025-09-23 19:41:54.258] 512+0 records in [2025-09-23 19:41:54.258] 512+0 records out [2025-09-23 19:41:54.290] Starting syslogd/klogd: done [2025-09-23 19:41:54.306] DML Start [2025-09-23 19:41:54.466] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:41:54.689] DML res1: 0 [2025-09-23 19:41:55.201] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:41:55.217] Read Success [2025-09-23 19:41:55.217] Verifying certificate... [2025-09-23 19:41:55.441] Verified OK [2025-09-23 19:41:55.457] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:41:57.024] Verified OK [2025-09-23 19:41:57.024] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:41:57.615] Verified OK [2025-09-23 19:41:57.615] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:42:00.284] fs.protected_hardlinks = 1 [2025-09-23 19:42:00.284] fs.protected_symlinks = 1 [2025-09-23 19:42:00.284] kernel.modules_disabled = 1 [2025-09-23 19:42:00.459] [2025-09-23 19:42:00.459] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:42:01.720] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:42:09.485] SBL1:1210.0.1.0 [2025-09-23 19:42:09.533] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:42:11.100] SBL2:1210.0.1.0 [2025-09-23 19:42:11.147] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:42:11.259] j-A [2025-09-23 19:42:18.598] The R5 Autosar Classic is running [2025-09-23 19:42:18.629] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:42:18.629] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:42:19.237] INIT: version 2.96 booting [2025-09-23 19:42:19.349] INIT: Entering runlevel: 5 [2025-09-23 19:42:19.508] mtd32 attached [2025-09-23 19:42:19.508] mtd28 attached [2025-09-23 19:42:19.525] mtd24 attached [2025-09-23 19:42:19.573] RTNETLINK answers: File exists [2025-09-23 19:42:19.619] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:42:19.619] ubi0:dml_code is mounted. [2025-09-23 19:42:19.619] ubi1:animations is mounted. [2025-09-23 19:42:19.619] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:42:19.619] ubi2:textures is mounted. [2025-09-23 19:42:19.619] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:42:19.619] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:42:19.619] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:42:19.619] data.LB_FadeInType0=100 [2025-09-23 19:42:19.640] data.CHLH_FadeInType0=0 [2025-09-23 19:42:19.640] data.WU_FadeInDelay=0 [2025-09-23 19:42:19.640] max_time_out=0 [2025-09-23 19:42:19.640] No splash screen [2025-09-23 19:42:19.640] stop dss Done [2025-09-23 19:42:19.688] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:42:19.721] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:42:19.721] /dev/mem opened. [2025-09-23 19:42:19.721] Memory mapped at address 0xffff9fd29000. [2025-09-23 19:42:19.721] Read at address 0x00600018 (0xffff9fd29018): 0x00000000 [2025-09-23 19:42:19.721] Write at address 0x00600018 (0xffff9fd29018): 0x00400040, readback 0x00400040 [2025-09-23 19:42:19.816] Loaded PowerVR consumer services. [2025-09-23 19:42:19.977] Waiting data available... [2025-09-23 19:42:19.993] 512+0 records in [2025-09-23 19:42:19.993] 512+0 records out [2025-09-23 19:42:20.040] Starting syslogd/klogd: done [2025-09-23 19:42:20.056] DML Start [2025-09-23 19:42:20.216] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:42:20.440] DML res1: 0 [2025-09-23 19:42:20.840] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:42:20.840] Read Success [2025-09-23 19:42:20.856] Verifying certificate... [2025-09-23 19:42:21.112] Verified OK [2025-09-23 19:42:21.128] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:42:22.737] Verified OK [2025-09-23 19:42:22.737] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:42:23.358] Verified OK [2025-09-23 19:42:23.358] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:42:26.027] fs.protected_hardlinks = 1 [2025-09-23 19:42:26.043] fs.protected_symlinks = 1 [2025-09-23 19:42:26.043] kernel.modules_disabled = 1 [2025-09-23 19:42:26.235] [2025-09-23 19:42:26.235] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:42:27.487] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:42:35.183] SBL1:1210.0.1.0 [2025-09-23 19:42:35.231] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:42:36.798] SBL2:1210.0.1.0 [2025-09-23 19:42:36.846] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:42:36.958] j-A [2025-09-23 19:42:44.298] The R5 Autosar Classic is running [2025-09-23 19:42:44.323] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:42:44.323] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:42:44.930] INIT: version 2.96 booting [2025-09-23 19:42:45.043] INIT: Entering runlevel: 5 [2025-09-23 19:42:45.202] mtd28 attached [2025-09-23 19:42:45.202] mtd24 attached [2025-09-23 19:42:45.234] mtd32 attached [2025-09-23 19:42:45.250] ubi0:animations is mounted. [2025-09-23 19:42:45.250] ubi1:textures is mounted. [2025-09-23 19:42:45.266] RTNETLINK answers: File exists [2025-09-23 19:42:45.300] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:42:45.300] ubi2:dml_code is mounted. [2025-09-23 19:42:45.300] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:42:45.300] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:42:45.300] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:42:45.333] data.LB_FadeInType0=100 [2025-09-23 19:42:45.333] data.CHLH_FadeInType0=0 [2025-09-23 19:42:45.333] data.WU_FadeInDelay=0 [2025-09-23 19:42:45.333] max_time_out=0 [2025-09-23 19:42:45.333] No splash screen [2025-09-23 19:42:45.333] stop dss Done [2025-09-23 19:42:45.333] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:42:45.365] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:42:45.401] /dev/mem opened. [2025-09-23 19:42:45.401] Memory mapped at address 0xffff82ca3000. [2025-09-23 19:42:45.401] Read at address 0x00600018 (0xffff82ca3018): 0x00000000 [2025-09-23 19:42:45.401] Write at address 0x00600018 (0xffff82ca3018): 0x00400040, readback 0x00400040 [2025-09-23 19:42:45.401] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:42:45.481] Loaded PowerVR consumer services. [2025-09-23 19:42:45.657] Waiting data available... [2025-09-23 19:42:45.673] 512+0 records in [2025-09-23 19:42:45.673] 512+0 records out [2025-09-23 19:42:45.705] Starting syslogd/klogd: done [2025-09-23 19:42:45.721] DML Start [2025-09-23 19:42:45.865] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:42:46.073] DML res1: 0 [2025-09-23 19:42:46.566] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:42:46.566] Read Success [2025-09-23 19:42:46.566] Verifying certificate... [2025-09-23 19:42:46.806] Verified OK [2025-09-23 19:42:46.822] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:42:48.496] Verified OK [2025-09-23 19:42:48.496] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:42:49.104] Verified OK [2025-09-23 19:42:49.124] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:42:51.779] fs.protected_hardlinks = 1 [2025-09-23 19:42:51.795] fs.protected_symlinks = 1 [2025-09-23 19:42:51.795] kernel.modules_disabled = 1 [2025-09-23 19:42:52.003] [2025-09-23 19:42:52.003] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:42:53.151] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:43:00.898] SBL1:1210.0.1.0 [2025-09-23 19:43:00.946] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:43:02.513] SBL2:1210.0.1.0 [2025-09-23 19:43:02.561] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:43:02.672] j-A [2025-09-23 19:43:10.014] The R5 Autosar Classic is running [2025-09-23 19:43:10.039] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:43:10.039] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:43:10.646] INIT: version 2.96 booting [2025-09-23 19:43:10.758] INIT: Entering runlevel: 5 [2025-09-23 19:43:10.917] mtd28 attached [2025-09-23 19:43:10.934] mtd24 attached [2025-09-23 19:43:10.934] mtd32 attached [2025-09-23 19:43:10.982] ubi0:animations is mounted. [2025-09-23 19:43:11.052] RTNETLINK answers: File exists [2025-09-23 19:43:11.052] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:43:11.052] ubi1:textures is mounted. [2025-09-23 19:43:11.052] ubi2:dml_code is mounted. [2025-09-23 19:43:11.052] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:43:11.052] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:43:11.052] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:43:11.052] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:43:11.052] data.LB_FadeInType0=100 [2025-09-23 19:43:11.052] data.CHLH_FadeInType0=0 [2025-09-23 19:43:11.052] data.WU_FadeInDelay=0 [2025-09-23 19:43:11.052] max_time_out=0 [2025-09-23 19:43:11.052] No splash screen [2025-09-23 19:43:11.052] stop dss Done [2025-09-23 19:43:11.084] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:43:11.084] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:43:11.121] /dev/mem opened. [2025-09-23 19:43:11.121] Memory mapped at address 0xffff8271e000. [2025-09-23 19:43:11.121] Read at address 0x00600018 (0xffff8271e018): 0x00000000 [2025-09-23 19:43:11.121] Write at address 0x00600018 (0xffff8271e018): 0x00400040, readback 0x00400040 [2025-09-23 19:43:11.392] Loaded PowerVR consumer services. [2025-09-23 19:43:11.408] Waiting data available... [2025-09-23 19:43:11.440] 512+0 records in [2025-09-23 19:43:11.440] 512+0 records out [2025-09-23 19:43:11.472] Starting syslogd/klogd: done [2025-09-23 19:43:11.489] DML Start [2025-09-23 19:43:11.664] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:43:11.872] DML res1: 0 [2025-09-23 19:43:12.287] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:43:12.287] Read Success [2025-09-23 19:43:12.287] Verifying certificate... [2025-09-23 19:43:12.559] Verified OK [2025-09-23 19:43:12.575] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:43:14.237] Verified OK [2025-09-23 19:43:14.237] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:43:14.796] Verified OK [2025-09-23 19:43:14.796] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:43:17.322] fs.protected_hardlinks = 1 [2025-09-23 19:43:17.322] fs.protected_symlinks = 1 [2025-09-23 19:43:17.338] kernel.modules_disabled = 1 [2025-09-23 19:43:17.514] [2025-09-23 19:43:17.514] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:43:18.909] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:43:26.640] SBL1:1210.0.1.0 [2025-09-23 19:43:26.688] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:43:28.255] SBL2:1210.0.1.0 [2025-09-23 19:43:28.303] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:43:28.414] j-A [2025-09-23 19:43:35.754] The R5 Autosar Classic is running [2025-09-23 19:43:35.779] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:43:35.779] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:43:36.388] INIT: version 2.96 booting [2025-09-23 19:43:36.500] INIT: Entering runlevel: 5 [2025-09-23 19:43:36.659] mtd32 attached [2025-09-23 19:43:36.675] mtd24 attached [2025-09-23 19:43:36.675] mtd28 attached [2025-09-23 19:43:36.723] RTNETLINK answers: File exists [2025-09-23 19:43:36.723] ubi0:dml_code is mounted. [2025-09-23 19:43:36.770] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:43:36.770] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:43:36.770] ubi2:animations is mounted. [2025-09-23 19:43:36.770] ubi1:textures is mounted. [2025-09-23 19:43:36.770] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:43:36.770] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:43:36.770] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:43:36.798] data.LB_FadeInType0=100 [2025-09-23 19:43:36.798] data.CHLH_FadeInType0=0 [2025-09-23 19:43:36.798] data.WU_FadeInDelay=0 [2025-09-23 19:43:36.798] max_time_out=0 [2025-09-23 19:43:36.798] No splash screen [2025-09-23 19:43:36.798] stop dss Done [2025-09-23 19:43:36.820] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:43:36.820] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:43:36.875] /dev/mem opened. [2025-09-23 19:43:36.875] Memory mapped at address 0xffffb8a51000. [2025-09-23 19:43:36.875] Read at address 0x00600018 (0xffffb8a51018): 0x00000000 [2025-09-23 19:43:36.875] Write at address 0x00600018 (0xffffb8a51018): 0x00400040, readback 0x00400040 [2025-09-23 19:43:37.035] Loaded PowerVR consumer services. [2025-09-23 19:43:37.131] Waiting data available... [2025-09-23 19:43:37.163] 512+0 records in [2025-09-23 19:43:37.163] 512+0 records out [2025-09-23 19:43:37.179] Starting syslogd/klogd: done [2025-09-23 19:43:37.211] DML Start [2025-09-23 19:43:37.371] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:43:37.611] DML res1: 0 [2025-09-23 19:43:38.039] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:43:38.039] Read Success [2025-09-23 19:43:38.039] Verifying certificate... [2025-09-23 19:43:38.296] Verified OK [2025-09-23 19:43:38.312] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:43:39.966] Verified OK [2025-09-23 19:43:39.966] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:43:40.595] Verified OK [2025-09-23 19:43:40.595] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:43:43.170] fs.protected_hardlinks = 1 [2025-09-23 19:43:43.186] fs.protected_symlinks = 1 [2025-09-23 19:43:43.186] kernel.modules_disabled = 1 [2025-09-23 19:43:43.378] [2025-09-23 19:43:43.378] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:43:44.624] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:43:52.379] SBL1:1210.0.1.0 [2025-09-23 19:43:52.427] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:43:53.995] SBL2:1210.0.1.0 [2025-09-23 19:43:54.042] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:43:54.154] j-A [2025-09-23 19:44:01.494] The R5 Autosar Classic is running [2025-09-23 19:44:01.519] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:44:01.519] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:44:02.126] INIT: version 2.96 booting [2025-09-23 19:44:02.238] INIT: Entering runlevel: 5 [2025-09-23 19:44:02.398] mtd28 attached [2025-09-23 19:44:02.414] mtd32 attached [2025-09-23 19:44:02.414] mtd24 attached [2025-09-23 19:44:02.446] ubi0:animations is mounted. [2025-09-23 19:44:02.462] RTNETLINK answers: File exists [2025-09-23 19:44:02.532] ubi2:textures is mounted. [2025-09-23 19:44:02.532] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:44:02.532] ubi1:dml_code is mounted. [2025-09-23 19:44:02.532] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:44:02.532] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:44:02.532] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:44:02.532] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:44:02.532] data.LB_FadeInType0=100 [2025-09-23 19:44:02.532] data.CHLH_FadeInType0=0 [2025-09-23 19:44:02.532] data.WU_FadeInDelay=0 [2025-09-23 19:44:02.532] max_time_out=0 [2025-09-23 19:44:02.532] No splash screen [2025-09-23 19:44:02.532] stop dss Done [2025-09-23 19:44:02.609] /dev/mem opened. [2025-09-23 19:44:02.609] Memory mapped at address 0xffff89426000. [2025-09-23 19:44:02.609] Read at address 0x00600018 (0xffff89426018): 0x00000000 [2025-09-23 19:44:02.609] Write at address 0x00600018 (0xffff89426018): 0x00400040, readback 0x00400040 [2025-09-23 19:44:02.609] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:44:02.609] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:44:02.674] Loaded PowerVR consumer services. [2025-09-23 19:44:02.866] Waiting data available... [2025-09-23 19:44:02.882] 512+0 records in [2025-09-23 19:44:02.882] 512+0 records out [2025-09-23 19:44:02.914] Starting syslogd/klogd: done [2025-09-23 19:44:02.930] DML Start [2025-09-23 19:44:03.089] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:44:03.346] DML res1: 0 [2025-09-23 19:44:03.787] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:44:03.787] Read Success [2025-09-23 19:44:03.787] Verifying certificate... [2025-09-23 19:44:04.043] Verified OK [2025-09-23 19:44:04.059] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:44:05.794] Verified OK [2025-09-23 19:44:05.794] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:44:06.394] Verified OK [2025-09-23 19:44:06.394] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:44:08.936] fs.protected_hardlinks = 1 [2025-09-23 19:44:08.952] fs.protected_symlinks = 1 [2025-09-23 19:44:08.952] kernel.modules_disabled = 1 [2025-09-23 19:44:09.159] [2025-09-23 19:44:09.159] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:44:10.375] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:44:18.114] SBL1:1210.0.1.0 [2025-09-23 19:44:18.162] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:44:19.729] SBL2:1210.0.1.0 [2025-09-23 19:44:19.777] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:44:19.888] j-A [2025-09-23 19:44:27.227] The R5 Autosar Classic is running [2025-09-23 19:44:27.252] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:44:27.252] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:44:27.860] INIT: version 2.96 booting [2025-09-23 19:44:27.972] INIT: Entering runlevel: 5 [2025-09-23 19:44:28.133] mtd28 attached [2025-09-23 19:44:28.133] mtd24 attached [2025-09-23 19:44:28.148] mtd32 attached [2025-09-23 19:44:28.196] RTNETLINK answers: File exists [2025-09-23 19:44:28.261] ubi0:animations is mounted. [2025-09-23 19:44:28.261] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:44:28.261] ubi1:textures is mounted. [2025-09-23 19:44:28.261] ubi2:dml_code is mounted. [2025-09-23 19:44:28.261] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:44:28.261] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:44:28.261] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:44:28.261] data.LB_FadeInType0=100 [2025-09-23 19:44:28.261] data.CHLH_FadeInType0=0 [2025-09-23 19:44:28.261] data.WU_FadeInDelay=0 [2025-09-23 19:44:28.261] max_time_out=0 [2025-09-23 19:44:28.261] No splash screen [2025-09-23 19:44:28.261] stop dss Done [2025-09-23 19:44:28.261] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:44:28.309] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:44:28.342] /dev/mem opened. [2025-09-23 19:44:28.342] Memory mapped at address 0xffffa2edf000. [2025-09-23 19:44:28.342] Read at address 0x00600018 (0xffffa2edf018): 0x00000000 [2025-09-23 19:44:28.342] Write at address 0x00600018 (0xffffa2edf018): 0x00400040, readback 0x00400040 [2025-09-23 19:44:28.342] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:44:28.454] Loaded PowerVR consumer services. [2025-09-23 19:44:28.614] Waiting data available... [2025-09-23 19:44:28.629] 512+0 records in [2025-09-23 19:44:28.645] 512+0 records out [2025-09-23 19:44:28.678] Starting syslogd/klogd: done [2025-09-23 19:44:28.694] DML Start [2025-09-23 19:44:28.870] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:44:29.093] DML res1: 0 [2025-09-23 19:44:29.509] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:44:29.530] Read Success [2025-09-23 19:44:29.530] Verifying certificate... [2025-09-23 19:44:29.818] Verified OK [2025-09-23 19:44:29.834] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:44:31.429] Verified OK [2025-09-23 19:44:31.429] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:44:32.059] Verified OK [2025-09-23 19:44:32.059] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:44:34.631] fs.protected_hardlinks = 1 [2025-09-23 19:44:34.631] fs.protected_symlinks = 1 [2025-09-23 19:44:34.631] kernel.modules_disabled = 1 [2025-09-23 19:44:34.807] [2025-09-23 19:44:34.807] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:44:36.117] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:44:43.876] SBL1:1210.0.1.0 [2025-09-23 19:44:43.908] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:44:45.491] SBL2:1210.0.1.0 [2025-09-23 19:44:45.523] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:44:45.635] j-A [2025-09-23 19:44:53.009] The R5 Autosar Classic is running [2025-09-23 19:44:53.009] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:44:53.009] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:44:53.617] INIT: version 2.96 booting [2025-09-23 19:44:53.729] INIT: Entering runlevel: 5 [2025-09-23 19:44:53.872] mtd24 attached [2025-09-23 19:44:53.888] mtd32 attached [2025-09-23 19:44:53.904] mtd28 attached [2025-09-23 19:44:53.952] ubi0:textures is mounted. [2025-09-23 19:44:53.952] RTNETLINK answers: File exists [2025-09-23 19:44:53.995] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:44:53.995] ubi1:dml_code is mounted. [2025-09-23 19:44:53.995] ubi2:animations is mounted. [2025-09-23 19:44:53.995] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:44:53.995] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:44:53.995] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:44:53.995] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:44:54.016] data.LB_FadeInType0=100 [2025-09-23 19:44:54.016] data.CHLH_FadeInType0=0 [2025-09-23 19:44:54.016] data.WU_FadeInDelay=0 [2025-09-23 19:44:54.016] max_time_out=0 [2025-09-23 19:44:54.016] No splash screen [2025-09-23 19:44:54.016] stop dss Done [2025-09-23 19:44:54.096] /dev/mem opened. [2025-09-23 19:44:54.096] Memory mapped at address 0xffffa3248000. [2025-09-23 19:44:54.096] Read at address 0x00600018 (0xffffa3248018): 0x00000000 [2025-09-23 19:44:54.096] Write at address 0x00600018 (0xffffa3248018): 0x00400040, readback 0x00400040 [2025-09-23 19:44:54.096] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:44:54.112] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:44:54.336] Loaded PowerVR consumer services. [2025-09-23 19:44:54.384] Waiting data available... [2025-09-23 19:44:54.400] 512+0 records in [2025-09-23 19:44:54.400] 512+0 records out [2025-09-23 19:44:54.448] Starting syslogd/klogd: done [2025-09-23 19:44:54.464] DML Start [2025-09-23 19:44:54.641] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:44:54.880] DML res1: 0 [2025-09-23 19:44:55.273] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:44:55.273] Read Success [2025-09-23 19:44:55.273] Verifying certificate... [2025-09-23 19:44:55.529] Verified OK [2025-09-23 19:44:55.544] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:44:57.250] Verified OK [2025-09-23 19:44:57.250] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:44:57.835] Verified OK [2025-09-23 19:44:57.835] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:45:00.410] fs.protected_hardlinks = 1 [2025-09-23 19:45:00.437] fs.protected_symlinks = 1 [2025-09-23 19:45:00.437] kernel.modules_disabled = 1 [2025-09-23 19:45:00.613] [2025-09-23 19:45:00.613] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:45:01.889] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:45:09.605] SBL1:1210.0.1.0 [2025-09-23 19:45:09.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:45:11.220] SBL2:1210.0.1.0 [2025-09-23 19:45:11.268] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:45:11.363] j-A [2025-09-23 19:45:18.718] The R5 Autosar Classic is running [2025-09-23 19:45:18.742] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:45:18.742] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:45:19.349] INIT: version 2.96 booting [2025-09-23 19:45:19.461] INIT: Entering runlevel: 5 [2025-09-23 19:45:19.605] mtd28 attached [2025-09-23 19:45:19.621] mtd32 attached [2025-09-23 19:45:19.637] mtd24 attached [2025-09-23 19:45:19.653] ubi0:animations is mounted. [2025-09-23 19:45:19.685] RTNETLINK answers: File exists [2025-09-23 19:45:19.685] ubi2:textures is mounted. [2025-09-23 19:45:19.743] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:45:19.743] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:45:19.743] ubi1:dml_code is mounted. [2025-09-23 19:45:19.743] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:45:19.743] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:45:19.743] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:45:19.743] data.LB_FadeInType0=100 [2025-09-23 19:45:19.743] data.CHLH_FadeInType0=0 [2025-09-23 19:45:19.743] data.WU_FadeInDelay=0 [2025-09-23 19:45:19.743] max_time_out=0 [2025-09-23 19:45:19.743] No splash screen [2025-09-23 19:45:19.743] stop dss Done [2025-09-23 19:45:19.759] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:45:19.775] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:45:19.807] /dev/mem opened. [2025-09-23 19:45:19.807] Memory mapped at address 0xffff9b2f3000. [2025-09-23 19:45:19.833] Read at address 0x00600018 (0xffff9b2f3018): 0x00000000 [2025-09-23 19:45:19.833] Write at address 0x00600018 (0xffff9b2f3018): 0x00400040, readback 0x00400040 [2025-09-23 19:45:20.057] Loaded PowerVR consumer services. [2025-09-23 19:45:20.072] Waiting data available... [2025-09-23 19:45:20.104] 512+0 records in [2025-09-23 19:45:20.104] 512+0 records out [2025-09-23 19:45:20.153] Starting syslogd/klogd: done [2025-09-23 19:45:20.169] DML Start [2025-09-23 19:45:20.344] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:45:20.601] DML res1: 0 [2025-09-23 19:45:20.984] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:45:21.000] Read Success [2025-09-23 19:45:21.000] Verifying certificate... [2025-09-23 19:45:21.240] Verified OK [2025-09-23 19:45:21.256] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:45:22.839] Verified OK [2025-09-23 19:45:22.839] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:45:23.553] Verified OK [2025-09-23 19:45:23.553] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:45:26.221] fs.protected_hardlinks = 1 [2025-09-23 19:45:26.221] fs.protected_symlinks = 1 [2025-09-23 19:45:26.221] kernel.modules_disabled = 1 [2025-09-23 19:45:26.414] [2025-09-23 19:45:26.414] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:45:27.669] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:45:35.352] SBL1:1210.0.1.0 [2025-09-23 19:45:35.400] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:45:36.967] SBL2:1210.0.1.0 [2025-09-23 19:45:37.015] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:45:37.112] j-A [2025-09-23 19:45:44.465] The R5 Autosar Classic is running [2025-09-23 19:45:44.490] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:45:44.490] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:45:45.098] INIT: version 2.96 booting [2025-09-23 19:45:45.210] INIT: Entering runlevel: 5 [2025-09-23 19:45:45.370] mtd28 attached [2025-09-23 19:45:45.386] mtd24 attached [2025-09-23 19:45:45.386] mtd32 attached [2025-09-23 19:45:45.434] ubi0:animations is mounted. [2025-09-23 19:45:45.510] RTNETLINK answers: File exists [2025-09-23 19:45:45.510] ubi1:textures is mounted. [2025-09-23 19:45:45.510] ubi2:dml_code is mounted. [2025-09-23 19:45:45.510] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:45:45.510] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:45:45.510] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:45:45.510] data.LB_FadeInType0=100 [2025-09-23 19:45:45.510] data.CHLH_FadeInType0=0 [2025-09-23 19:45:45.510] data.WU_FadeInDelay=0 [2025-09-23 19:45:45.510] max_time_out=0 [2025-09-23 19:45:45.510] No splash screen [2025-09-23 19:45:45.510] stop dss Done [2025-09-23 19:45:45.510] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:45:45.510] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:45:45.582] /dev/mem opened. [2025-09-23 19:45:45.582] Memory mapped at address 0xffff8df33000. [2025-09-23 19:45:45.582] Read at address 0x00600018 (0xffff8df33018): 0x00000000 [2025-09-23 19:45:45.582] Write at address 0x00600018 (0xffff8df33018): 0x00400040, readback 0x00400040 [2025-09-23 19:45:45.582] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:45:45.582] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:45:45.821] Loaded PowerVR consumer services. [2025-09-23 19:45:45.894] Waiting data available... [2025-09-23 19:45:45.894] 512+0 records in [2025-09-23 19:45:45.894] 512+0 records out [2025-09-23 19:45:45.926] Starting syslogd/klogd: done [2025-09-23 19:45:45.942] DML Start [2025-09-23 19:45:46.117] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:45:46.309] DML res1: 0 [2025-09-23 19:45:46.789] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:45:46.805] Read Success [2025-09-23 19:45:46.805] Verifying certificate... [2025-09-23 19:45:47.093] Verified OK [2025-09-23 19:45:47.109] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:45:48.898] Verified OK [2025-09-23 19:45:48.898] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:45:49.473] Verified OK [2025-09-23 19:45:49.494] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:45:51.972] fs.protected_hardlinks = 1 [2025-09-23 19:45:51.972] fs.protected_symlinks = 1 [2025-09-23 19:45:51.988] kernel.modules_disabled = 1 [2025-09-23 19:45:52.196] [2025-09-23 19:45:52.196] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:45:53.388] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:46:01.081] SBL1:1210.0.1.0 [2025-09-23 19:46:01.113] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:46:02.696] SBL2:1210.0.1.0 [2025-09-23 19:46:02.728] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:46:02.840] j-A [2025-09-23 19:46:10.216] The R5 Autosar Classic is running [2025-09-23 19:46:10.216] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:46:10.216] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:46:10.823] INIT: version 2.96 booting [2025-09-23 19:46:10.935] INIT: Entering runlevel: 5 [2025-09-23 19:46:11.079] mtd24 attached [2025-09-23 19:46:11.095] mtd28 attached [2025-09-23 19:46:11.111] mtd32 attached [2025-09-23 19:46:11.143] ubi0:textures is mounted. [2025-09-23 19:46:11.159] RTNETLINK answers: File exists [2025-09-23 19:46:11.211] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:46:11.211] ubi1:animations is mounted. [2025-09-23 19:46:11.211] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:46:11.211] ubi2:dml_code is mounted. [2025-09-23 19:46:11.211] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:46:11.211] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:46:11.211] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:46:11.211] data.LB_FadeInType0=100 [2025-09-23 19:46:11.211] data.CHLH_FadeInType0=0 [2025-09-23 19:46:11.211] data.WU_FadeInDelay=0 [2025-09-23 19:46:11.211] max_time_out=0 [2025-09-23 19:46:11.211] No splash screen [2025-09-23 19:46:11.211] stop dss Done [2025-09-23 19:46:11.259] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:46:11.292] /dev/mem opened. [2025-09-23 19:46:11.292] Memory mapped at address 0xffff8f2da000. [2025-09-23 19:46:11.292] Read at address 0x00600018 (0xffff8f2da018): 0x00000000 [2025-09-23 19:46:11.292] Write at address 0x00600018 (0xffff8f2da018): 0x00400040, readback 0x00400040 [2025-09-23 19:46:11.292] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:46:11.533] Loaded PowerVR consumer services. [2025-09-23 19:46:11.548] Waiting data available... [2025-09-23 19:46:11.580] 512+0 records in [2025-09-23 19:46:11.580] 512+0 records out [2025-09-23 19:46:11.628] Starting syslogd/klogd: done [2025-09-23 19:46:11.644] DML Start [2025-09-23 19:46:11.804] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:46:12.028] DML res1: 0 [2025-09-23 19:46:12.523] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:46:12.523] Read Success [2025-09-23 19:46:12.539] Verifying certificate... [2025-09-23 19:46:12.827] Verified OK [2025-09-23 19:46:12.843] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:46:14.473] Verified OK [2025-09-23 19:46:14.495] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:46:15.101] Verified OK [2025-09-23 19:46:15.101] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:46:17.675] fs.protected_hardlinks = 1 [2025-09-23 19:46:17.675] fs.protected_symlinks = 1 [2025-09-23 19:46:17.690] kernel.modules_disabled = 1 [2025-09-23 19:46:17.867] [2025-09-23 19:46:17.867] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:46:19.125] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:46:26.829] SBL1:1210.0.1.0 [2025-09-23 19:46:26.861] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:46:28.443] SBL2:1210.0.1.0 [2025-09-23 19:46:28.475] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:46:28.587] j-A [2025-09-23 19:46:35.963] The R5 Autosar Classic is running [2025-09-23 19:46:35.963] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:46:35.963] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:46:36.570] INIT: version 2.96 booting [2025-09-23 19:46:36.683] INIT: Entering runlevel: 5 [2025-09-23 19:46:36.826] mtd28 attached [2025-09-23 19:46:36.843] mtd24 attached [2025-09-23 19:46:36.859] mtd32 attached [2025-09-23 19:46:36.891] ubi0:animations is mounted. [2025-09-23 19:46:36.961] RTNETLINK answers: File exists [2025-09-23 19:46:36.961] ubi1:textures is mounted. [2025-09-23 19:46:36.961] ubi2:dml_code is mounted. [2025-09-23 19:46:36.961] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:46:36.961] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:46:36.961] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:46:36.961] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:46:36.961] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:46:36.961] data.LB_FadeInType0=100 [2025-09-23 19:46:36.961] data.CHLH_FadeInType0=0 [2025-09-23 19:46:36.961] data.WU_FadeInDelay=0 [2025-09-23 19:46:36.961] max_time_out=0 [2025-09-23 19:46:36.961] No splash screen [2025-09-23 19:46:36.961] stop dss Done [2025-09-23 19:46:37.025] /dev/mem opened. [2025-09-23 19:46:37.025] Memory mapped at address 0xffff8be88000. [2025-09-23 19:46:37.025] Read at address 0x00600018 (0xffff8be88018): 0x00000000 [2025-09-23 19:46:37.025] Write at address 0x00600018 (0xffff8be88018): 0x00400040, readback 0x00400040 [2025-09-23 19:46:37.055] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:46:37.055] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:46:37.152] Loaded PowerVR consumer services. [2025-09-23 19:46:37.295] Waiting data available... [2025-09-23 19:46:37.311] 512+0 records in [2025-09-23 19:46:37.311] 512+0 records out [2025-09-23 19:46:37.359] Starting syslogd/klogd: done [2025-09-23 19:46:37.375] DML Start [2025-09-23 19:46:37.535] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:46:37.775] DML res1: 0 [2025-09-23 19:46:38.213] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:46:38.213] Read Success [2025-09-23 19:46:38.213] Verifying certificate... [2025-09-23 19:46:38.452] Verified OK [2025-09-23 19:46:38.469] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:46:40.227] Verified OK [2025-09-23 19:46:40.227] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:46:40.739] Verified OK [2025-09-23 19:46:40.760] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:46:43.174] fs.protected_hardlinks = 1 [2025-09-23 19:46:43.190] fs.protected_symlinks = 1 [2025-09-23 19:46:43.190] kernel.modules_disabled = 1 [2025-09-23 19:46:43.382] [2025-09-23 19:46:43.382] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:46:44.812] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:46:52.554] SBL1:1210.0.1.0 [2025-09-23 19:46:52.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:46:54.170] SBL2:1210.0.1.0 [2025-09-23 19:46:54.217] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:46:54.313] j-A [2025-09-23 19:47:01.670] The R5 Autosar Classic is running [2025-09-23 19:47:01.693] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:47:01.693] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:47:02.300] INIT: version 2.96 booting [2025-09-23 19:47:02.412] INIT: Entering runlevel: 5 [2025-09-23 19:47:02.572] mtd24 attached [2025-09-23 19:47:02.588] mtd32 attached [2025-09-23 19:47:02.588] mtd28 attached [2025-09-23 19:47:02.636] RTNETLINK answers: File exists [2025-09-23 19:47:02.636] ubi0:textures is mounted. [2025-09-23 19:47:02.702] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:47:02.702] ubi1:dml_code is mounted. [2025-09-23 19:47:02.702] ubi2:animations is mounted. [2025-09-23 19:47:02.702] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:47:02.702] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:47:02.702] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:47:02.702] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:47:02.703] data.LB_FadeInType0=100 [2025-09-23 19:47:02.703] data.CHLH_FadeInType0=0 [2025-09-23 19:47:02.703] data.WU_FadeInDelay=0 [2025-09-23 19:47:02.703] max_time_out=0 [2025-09-23 19:47:02.703] No splash screen [2025-09-23 19:47:02.703] stop dss Done [2025-09-23 19:47:02.734] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:47:02.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:47:02.780] /dev/mem opened. [2025-09-23 19:47:02.780] Memory mapped at address 0xffff92814000. [2025-09-23 19:47:02.780] Read at address 0x00600018 (0xffff92814018): 0x00000000 [2025-09-23 19:47:02.780] Write at address 0x00600018 (0xffff92814018): 0x00400040, readback 0x00400040 [2025-09-23 19:47:03.021] Loaded PowerVR consumer services. [2025-09-23 19:47:03.052] Waiting data available... [2025-09-23 19:47:03.084] 512+0 records in [2025-09-23 19:47:03.084] 512+0 records out [2025-09-23 19:47:03.116] Starting syslogd/klogd: done [2025-09-23 19:47:03.132] DML Start [2025-09-23 19:47:03.293] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:47:03.500] DML res1: 0 [2025-09-23 19:47:03.977] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:47:03.977] Read Success [2025-09-23 19:47:03.977] Verifying certificate... [2025-09-23 19:47:04.201] Verified OK [2025-09-23 19:47:04.233] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:47:05.832] Verified OK [2025-09-23 19:47:05.832] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:47:06.407] Verified OK [2025-09-23 19:47:06.423] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:47:09.158] fs.protected_hardlinks = 1 [2025-09-23 19:47:09.173] fs.protected_symlinks = 1 [2025-09-23 19:47:09.173] kernel.modules_disabled = 1 [2025-09-23 19:47:09.365] [2025-09-23 19:47:09.365] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:47:10.551] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:47:18.281] SBL1:1210.0.1.0 [2025-09-23 19:47:18.313] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:47:19.897] SBL2:1210.0.1.0 [2025-09-23 19:47:19.945] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:47:20.040] j-A [2025-09-23 19:47:27.397] The R5 Autosar Classic is running [2025-09-23 19:47:27.418] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:47:27.418] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:47:28.026] INIT: version 2.96 booting [2025-09-23 19:47:28.137] INIT: Entering runlevel: 5 [2025-09-23 19:47:28.297] mtd32 attached [2025-09-23 19:47:28.297] mtd28 attached [2025-09-23 19:47:28.313] mtd24 attached [2025-09-23 19:47:28.361] RTNETLINK answers: File exists [2025-09-23 19:47:28.361] ubi0:dml_code is mounted. [2025-09-23 19:47:28.432] ubi1:animations is mounted. [2025-09-23 19:47:28.432] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:47:28.432] ubi2:textures is mounted. [2025-09-23 19:47:28.432] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:47:28.432] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:47:28.432] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:47:28.432] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:47:28.432] data.LB_FadeInType0=100 [2025-09-23 19:47:28.432] data.CHLH_FadeInType0=0 [2025-09-23 19:47:28.432] data.WU_FadeInDelay=0 [2025-09-23 19:47:28.432] max_time_out=0 [2025-09-23 19:47:28.432] No splash screen [2025-09-23 19:47:28.432] stop dss Done [2025-09-23 19:47:28.480] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:47:28.513] /dev/mem opened. [2025-09-23 19:47:28.513] Memory mapped at address 0xffffaf4db000. [2025-09-23 19:47:28.513] Read at address 0x00600018 (0xffffaf4db018): 0x00000000 [2025-09-23 19:47:28.513] Write at address 0x00600018 (0xffffaf4db018): 0x00400040, readback 0x00400040 [2025-09-23 19:47:28.513] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:47:28.721] Loaded PowerVR consumer services. [2025-09-23 19:47:28.785] Waiting data available... [2025-09-23 19:47:28.801] 512+0 records in [2025-09-23 19:47:28.801] 512+0 records out [2025-09-23 19:47:28.849] Starting syslogd/klogd: done [2025-09-23 19:47:28.865] DML Start [2025-09-23 19:47:29.041] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:47:29.265] DML res1: 0 [2025-09-23 19:47:29.695] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:47:29.695] Read Success [2025-09-23 19:47:29.695] Verifying certificate... [2025-09-23 19:47:29.934] Verified OK [2025-09-23 19:47:29.950] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:47:31.629] Verified OK [2025-09-23 19:47:31.645] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:47:32.230] Verified OK [2025-09-23 19:47:32.230] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:47:34.836] fs.protected_hardlinks = 1 [2025-09-23 19:47:34.852] fs.protected_symlinks = 1 [2025-09-23 19:47:34.852] kernel.modules_disabled = 1 [2025-09-23 19:47:35.043] [2025-09-23 19:47:35.043] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:47:36.294] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:47:44.003] SBL1:1210.0.1.0 [2025-09-23 19:47:44.051] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:47:45.617] SBL2:1210.0.1.0 [2025-09-23 19:47:45.665] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:47:45.761] j-A [2025-09-23 19:47:53.118] The R5 Autosar Classic is running [2025-09-23 19:47:53.142] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:47:53.142] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:47:53.749] INIT: version 2.96 booting [2025-09-23 19:47:53.861] INIT: Entering runlevel: 5 [2025-09-23 19:47:54.021] mtd32 attached [2025-09-23 19:47:54.037] mtd24 attached [2025-09-23 19:47:54.037] mtd28 attached [2025-09-23 19:47:54.085] ubi0:dml_code is mounted. [2025-09-23 19:47:54.137] RTNETLINK answers: File exists [2025-09-23 19:47:54.137] ubi1:textures is mounted. [2025-09-23 19:47:54.137] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:47:54.137] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:47:54.137] ubi2:animations is mounted. [2025-09-23 19:47:54.137] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:47:54.137] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:47:54.137] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:47:54.137] data.LB_FadeInType0=100 [2025-09-23 19:47:54.158] data.CHLH_FadeInType0=0 [2025-09-23 19:47:54.158] data.WU_FadeInDelay=0 [2025-09-23 19:47:54.158] max_time_out=0 [2025-09-23 19:47:54.158] No splash screen [2025-09-23 19:47:54.158] stop dss Done [2025-09-23 19:47:54.190] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:47:54.206] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:47:54.238] /dev/mem opened. [2025-09-23 19:47:54.238] Memory mapped at address 0xffffa8978000. [2025-09-23 19:47:54.238] Read at address 0x00600018 (0xffffa8978018): 0x00000000 [2025-09-23 19:47:54.238] Write at address 0x00600018 (0xffffa8978018): 0x00400040, readback 0x00400040 [2025-09-23 19:47:54.381] Loaded PowerVR consumer services. [2025-09-23 19:47:54.510] Waiting data available... [2025-09-23 19:47:54.526] 512+0 records in [2025-09-23 19:47:54.526] 512+0 records out [2025-09-23 19:47:54.574] Starting syslogd/klogd: done [2025-09-23 19:47:54.590] DML Start [2025-09-23 19:47:54.782] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:47:54.957] DML res1: 0 [2025-09-23 19:47:55.470] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:47:55.470] Read Success [2025-09-23 19:47:55.470] Verifying certificate... [2025-09-23 19:47:55.694] Verified OK [2025-09-23 19:47:55.725] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:47:57.435] Verified OK [2025-09-23 19:47:57.435] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:47:57.969] Verified OK [2025-09-23 19:47:57.969] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:48:00.464] fs.protected_hardlinks = 1 [2025-09-23 19:48:00.480] fs.protected_symlinks = 1 [2025-09-23 19:48:00.496] kernel.modules_disabled = 1 [2025-09-23 19:48:00.687] [2025-09-23 19:48:00.687] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:48:02.013] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:48:09.722] SBL1:1210.0.1.0 [2025-09-23 19:48:09.770] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:48:11.337] SBL2:1210.0.1.0 [2025-09-23 19:48:11.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:48:11.497] j-A [2025-09-23 19:48:18.837] The R5 Autosar Classic is running [2025-09-23 19:48:18.862] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:48:18.862] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:48:19.470] INIT: version 2.96 booting [2025-09-23 19:48:19.582] INIT: Entering runlevel: 5 [2025-09-23 19:48:19.741] mtd24 attached [2025-09-23 19:48:19.741] mtd28 attached [2025-09-23 19:48:19.773] mtd32 attached [2025-09-23 19:48:19.789] ubi0:textures is mounted. [2025-09-23 19:48:19.805] RTNETLINK answers: File exists [2025-09-23 19:48:19.851] ubi2:dml_code is mounted. [2025-09-23 19:48:19.851] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:48:19.851] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:48:19.851] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:48:19.851] ubi1:animations is mounted. [2025-09-23 19:48:19.851] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:48:19.851] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:48:19.851] data.LB_FadeInType0=100 [2025-09-23 19:48:19.851] data.CHLH_FadeInType0=0 [2025-09-23 19:48:19.851] data.WU_FadeInDelay=0 [2025-09-23 19:48:19.872] max_time_out=0 [2025-09-23 19:48:19.872] No splash screen [2025-09-23 19:48:19.872] stop dss Done [2025-09-23 19:48:19.947] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:48:19.947] /dev/mem opened. [2025-09-23 19:48:19.947] Memory mapped at address 0xffffb6401000. [2025-09-23 19:48:19.947] Read at address 0x00600018 (0xffffb6401018): 0x00000000 [2025-09-23 19:48:19.947] Write at address 0x00600018 (0xffffb6401018): 0x00400040, readback 0x00400040 [2025-09-23 19:48:19.947] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:48:20.075] Loaded PowerVR consumer services. [2025-09-23 19:48:20.204] Waiting data available... [2025-09-23 19:48:20.219] 512+0 records in [2025-09-23 19:48:20.219] 512+0 records out [2025-09-23 19:48:20.251] Starting syslogd/klogd: done [2025-09-23 19:48:20.283] DML Start [2025-09-23 19:48:20.427] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:48:20.635] DML res1: 0 [2025-09-23 19:48:21.147] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:48:21.163] Read Success [2025-09-23 19:48:21.163] Verifying certificate... [2025-09-23 19:48:21.419] Verified OK [2025-09-23 19:48:21.435] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:48:23.161] Verified OK [2025-09-23 19:48:23.161] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:48:23.646] Verified OK [2025-09-23 19:48:23.646] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:48:26.044] fs.protected_hardlinks = 1 [2025-09-23 19:48:26.044] fs.protected_symlinks = 1 [2025-09-23 19:48:26.060] kernel.modules_disabled = 1 [2025-09-23 19:48:26.236] [2025-09-23 19:48:26.236] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:48:27.716] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:48:35.462] SBL1:1210.0.1.0 [2025-09-23 19:48:35.510] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:48:37.077] SBL2:1210.0.1.0 [2025-09-23 19:48:37.125] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:48:37.237] j-A [2025-09-23 19:48:44.576] The R5 Autosar Classic is running [2025-09-23 19:48:44.608] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:48:44.608] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:48:45.214] INIT: version 2.96 booting [2025-09-23 19:48:45.327] INIT: Entering runlevel: 5 [2025-09-23 19:48:45.471] mtd28 attached [2025-09-23 19:48:45.487] mtd24 attached [2025-09-23 19:48:45.502] mtd32 attached [2025-09-23 19:48:45.604] RTNETLINK answers: File exists [2025-09-23 19:48:45.604] ubi0:animations is mounted. [2025-09-23 19:48:45.604] ubi1:textures is mounted. [2025-09-23 19:48:45.604] ubi2:dml_code is mounted. [2025-09-23 19:48:45.604] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:48:45.604] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:48:45.604] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:48:45.604] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:48:45.604] data.LB_FadeInType0=100 [2025-09-23 19:48:45.604] data.CHLH_FadeInType0=0 [2025-09-23 19:48:45.604] data.WU_FadeInDelay=0 [2025-09-23 19:48:45.604] max_time_out=0 [2025-09-23 19:48:45.604] No splash screen [2025-09-23 19:48:45.604] stop dss Done [2025-09-23 19:48:45.604] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:48:45.652] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:48:45.668] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:48:45.702] /dev/mem opened. [2025-09-23 19:48:45.702] Memory mapped at address 0xffff9aa81000. [2025-09-23 19:48:45.702] Read at address 0x00600018 (0xffff9aa81018): 0x00000000 [2025-09-23 19:48:45.702] Write at address 0x00600018 (0xffff9aa81018): 0x00400040, readback 0x00400040 [2025-09-23 19:48:45.798] Loaded PowerVR consumer services. [2025-09-23 19:48:45.941] Waiting data available... [2025-09-23 19:48:45.971] 512+0 records in [2025-09-23 19:48:45.971] 512+0 records out [2025-09-23 19:48:46.002] Starting syslogd/klogd: done [2025-09-23 19:48:46.018] DML Start [2025-09-23 19:48:46.194] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:48:46.418] DML res1: 0 [2025-09-23 19:48:46.873] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:48:46.873] Read Success [2025-09-23 19:48:46.873] Verifying certificate... [2025-09-23 19:48:47.113] Verified OK [2025-09-23 19:48:47.129] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:48:48.632] Verified OK [2025-09-23 19:48:48.632] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:48:49.267] Verified OK [2025-09-23 19:48:49.267] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:48:51.986] fs.protected_hardlinks = 1 [2025-09-23 19:48:52.002] fs.protected_symlinks = 1 [2025-09-23 19:48:52.002] kernel.modules_disabled = 1 [2025-09-23 19:48:52.210] [2025-09-23 19:48:52.210] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:48:53.510] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:49:01.205] SBL1:1210.0.1.0 [2025-09-23 19:49:01.253] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:49:02.820] SBL2:1210.0.1.0 [2025-09-23 19:49:02.868] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:49:02.963] j-A [2025-09-23 19:49:10.317] The R5 Autosar Classic is running [2025-09-23 19:49:10.342] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:49:10.342] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:49:10.950] INIT: version 2.96 booting [2025-09-23 19:49:11.062] INIT: Entering runlevel: 5 [2025-09-23 19:49:11.223] mtd24 attached [2025-09-23 19:49:11.239] mtd28 attached [2025-09-23 19:49:11.239] mtd32 attached [2025-09-23 19:49:11.357] ubi0:textures is mounted. [2025-09-23 19:49:11.357] RTNETLINK answers: File exists [2025-09-23 19:49:11.357] ubi1:animations is mounted. [2025-09-23 19:49:11.357] ubi2:dml_code is mounted. [2025-09-23 19:49:11.357] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:49:11.357] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:49:11.357] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:49:11.357] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:49:11.357] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:49:11.357] data.LB_FadeInType0=100 [2025-09-23 19:49:11.357] data.CHLH_FadeInType0=0 [2025-09-23 19:49:11.357] data.WU_FadeInDelay=0 [2025-09-23 19:49:11.357] max_time_out=0 [2025-09-23 19:49:11.357] No splash screen [2025-09-23 19:49:11.357] stop dss Done [2025-09-23 19:49:11.405] /dev/mem opened. [2025-09-23 19:49:11.405] Memory mapped at address 0xffff86b9c000. [2025-09-23 19:49:11.440] Read at address 0x00600018 (0xffff86b9c018): 0x00000000 [2025-09-23 19:49:11.440] Write at address 0x00600018 (0xffff86b9c018): 0x00400040, readback 0x00400040 [2025-09-23 19:49:11.440] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:49:11.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:49:11.568] Loaded PowerVR consumer services. [2025-09-23 19:49:11.712] Waiting data available... [2025-09-23 19:49:11.728] 512+0 records in [2025-09-23 19:49:11.728] 512+0 records out [2025-09-23 19:49:11.776] Starting syslogd/klogd: done [2025-09-23 19:49:11.792] DML Start [2025-09-23 19:49:11.968] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:49:12.208] DML res1: 0 [2025-09-23 19:49:12.613] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:49:12.613] Read Success [2025-09-23 19:49:12.613] Verifying certificate... [2025-09-23 19:49:12.854] Verified OK [2025-09-23 19:49:12.870] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:49:14.564] Verified OK [2025-09-23 19:49:14.564] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:49:15.124] Verified OK [2025-09-23 19:49:15.124] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:49:17.747] fs.protected_hardlinks = 1 [2025-09-23 19:49:17.778] fs.protected_symlinks = 1 [2025-09-23 19:49:17.778] kernel.modules_disabled = 1 [2025-09-23 19:49:17.970] [2025-09-23 19:49:17.970] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:49:19.241] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:49:26.920] SBL1:1210.0.1.0 [2025-09-23 19:49:26.968] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:49:28.535] SBL2:1210.0.1.0 [2025-09-23 19:49:28.583] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:49:28.695] j-A [2025-09-23 19:49:36.065] The R5 Autosar Classic is running [2025-09-23 19:49:36.065] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:49:36.065] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:49:36.672] INIT: version 2.96 booting [2025-09-23 19:49:36.785] INIT: Entering runlevel: 5 [2025-09-23 19:49:36.929] mtd32 attached [2025-09-23 19:49:36.945] mtd24 attached [2025-09-23 19:49:36.960] mtd28 attached [2025-09-23 19:49:36.992] ubi0:dml_code is mounted. [2025-09-23 19:49:36.992] RTNETLINK answers: File exists [2025-09-23 19:49:37.063] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:49:37.063] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:49:37.063] ubi2:animations is mounted. [2025-09-23 19:49:37.063] ubi1:textures is mounted. [2025-09-23 19:49:37.063] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:49:37.063] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:49:37.063] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:49:37.063] data.LB_FadeInType0=100 [2025-09-23 19:49:37.063] data.CHLH_FadeInType0=0 [2025-09-23 19:49:37.063] data.WU_FadeInDelay=0 [2025-09-23 19:49:37.063] max_time_out=0 [2025-09-23 19:49:37.063] No splash screen [2025-09-23 19:49:37.063] stop dss Done [2025-09-23 19:49:37.080] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:49:37.096] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:49:37.112] /dev/mem opened. [2025-09-23 19:49:37.112] Memory mapped at address 0xffffa4902000. [2025-09-23 19:49:37.138] Read at address 0x00600018 (0xffffa4902018): 0x00000000 [2025-09-23 19:49:37.138] Write at address 0x00600018 (0xffffa4902018): 0x00400040, readback 0x00400040 [2025-09-23 19:49:37.394] Loaded PowerVR consumer services. [2025-09-23 19:49:37.410] Waiting data available... [2025-09-23 19:49:37.426] 512+0 records in [2025-09-23 19:49:37.426] 512+0 records out [2025-09-23 19:49:37.441] Starting syslogd/klogd: done [2025-09-23 19:49:37.473] DML Start [2025-09-23 19:49:37.681] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:49:37.889] DML res1: 0 [2025-09-23 19:49:38.284] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:49:38.284] Read Success [2025-09-23 19:49:38.284] Verifying certificate... [2025-09-23 19:49:38.556] Verified OK [2025-09-23 19:49:38.573] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:49:40.177] Verified OK [2025-09-23 19:49:40.177] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:49:40.801] Verified OK [2025-09-23 19:49:40.801] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:49:43.456] fs.protected_hardlinks = 1 [2025-09-23 19:49:43.456] fs.protected_symlinks = 1 [2025-09-23 19:49:43.472] kernel.modules_disabled = 1 [2025-09-23 19:49:43.648] [2025-09-23 19:49:43.648] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:49:44.915] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:49:52.654] SBL1:1210.0.1.0 [2025-09-23 19:49:52.702] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:49:54.269] SBL2:1210.0.1.0 [2025-09-23 19:49:54.317] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 19:49:54.413] j-A [2025-09-23 19:50:01.767] The R5 Autosar Classic is running [2025-09-23 19:50:01.790] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:50:01.790] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:50:02.415] INIT: version 2.96 booting [2025-09-23 19:50:02.526] INIT: Entering runlevel: 5 [2025-09-23 19:50:02.670] mtd28 attached [2025-09-23 19:50:02.687] mtd24 attached [2025-09-23 19:50:02.702] mtd32 attached [2025-09-23 19:50:02.734] ubi0:animations is mounted. [2025-09-23 19:50:02.808] RTNETLINK answers: File exists [2025-09-23 19:50:02.808] ubi1:textures is mounted. [2025-09-23 19:50:02.808] ubi2:dml_code is mounted. [2025-09-23 19:50:02.808] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:50:02.808] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:50:02.808] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:50:02.808] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:50:02.808] data.LB_FadeInType0=100 [2025-09-23 19:50:02.808] data.CHLH_FadeInType0=0 [2025-09-23 19:50:02.808] data.WU_FadeInDelay=0 [2025-09-23 19:50:02.808] max_time_out=0 [2025-09-23 19:50:02.808] No splash screen [2025-09-23 19:50:02.808] stop dss Done [2025-09-23 19:50:02.808] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:50:02.856] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:50:02.889] /dev/mem opened. [2025-09-23 19:50:02.889] Memory mapped at address 0xffffbdfb4000. [2025-09-23 19:50:02.889] Read at address 0x00600018 (0xffffbdfb4018): 0x00000000 [2025-09-23 19:50:02.889] Write at address 0x00600018 (0xffffbdfb4018): 0x00400040, readback 0x00400040 [2025-09-23 19:50:02.889] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:50:03.145] Loaded PowerVR consumer services. [2025-09-23 19:50:03.161] Waiting data available... [2025-09-23 19:50:03.193] 512+0 records in [2025-09-23 19:50:03.193] 512+0 records out [2025-09-23 19:50:03.225] Starting syslogd/klogd: done [2025-09-23 19:50:03.241] DML Start [2025-09-23 19:50:03.433] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:50:03.656] DML res1: 0 [2025-09-23 19:50:04.039] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:50:04.039] Read Success [2025-09-23 19:50:04.039] Verifying certificate... [2025-09-23 19:50:04.295] Verified OK [2025-09-23 19:50:04.310] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:50:06.021] Verified OK [2025-09-23 19:50:06.021] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:50:06.581] Verified OK [2025-09-23 19:50:06.602] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:50:09.064] fs.protected_hardlinks = 1 [2025-09-23 19:50:09.064] fs.protected_symlinks = 1 [2025-09-23 19:50:09.080] kernel.modules_disabled = 1 [2025-09-23 19:50:09.272] [2025-09-23 19:50:09.272] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:50:10.660] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:50:18.376] SBL1:1210.0.1.0 [2025-09-23 19:50:18.424] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:50:19.990] SBL2:1210.0.1.0 [2025-09-23 19:50:20.039] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:50:20.150] j-A [2025-09-23 19:50:27.521] The R5 Autosar Classic is running [2025-09-23 19:50:27.521] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:50:27.521] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:50:28.129] INIT: version 2.96 booting [2025-09-23 19:50:28.241] INIT: Entering runlevel: 5 [2025-09-23 19:50:28.385] mtd24 attached [2025-09-23 19:50:28.401] mtd28 attached [2025-09-23 19:50:28.401] mtd32 attached [2025-09-23 19:50:28.448] ubi0:textures is mounted. [2025-09-23 19:50:28.464] RTNETLINK answers: File exists [2025-09-23 19:50:28.464] ubi1:animations is mounted. [2025-09-23 19:50:28.517] ubi2:dml_code is mounted. [2025-09-23 19:50:28.517] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:50:28.517] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:50:28.517] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:50:28.517] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:50:28.517] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:50:28.517] data.LB_FadeInType0=100 [2025-09-23 19:50:28.517] data.CHLH_FadeInType0=0 [2025-09-23 19:50:28.517] data.WU_FadeInDelay=0 [2025-09-23 19:50:28.517] max_time_out=0 [2025-09-23 19:50:28.517] No splash screen [2025-09-23 19:50:28.517] stop dss Done [2025-09-23 19:50:28.597] /dev/mem opened. [2025-09-23 19:50:28.597] Memory mapped at address 0xffff961a2000. [2025-09-23 19:50:28.597] Read at address 0x00600018 (0xffff961a2018): 0x00000000 [2025-09-23 19:50:28.597] Write at address 0x00600018 (0xffff961a2018): 0x00400040, readback 0x00400040 [2025-09-23 19:50:28.597] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:50:28.597] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:50:28.822] Loaded PowerVR consumer services. [2025-09-23 19:50:28.901] Waiting data available... [2025-09-23 19:50:28.933] 512+0 records in [2025-09-23 19:50:28.933] 512+0 records out [2025-09-23 19:50:28.965] Starting syslogd/klogd: done [2025-09-23 19:50:28.981] DML Start [2025-09-23 19:50:29.125] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:50:29.349] DML res1: 0 [2025-09-23 19:50:29.792] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:50:29.792] Read Success [2025-09-23 19:50:29.792] Verifying certificate... [2025-09-23 19:50:30.063] Verified OK [2025-09-23 19:50:30.079] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:50:31.734] Verified OK [2025-09-23 19:50:31.734] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:50:32.333] Verified OK [2025-09-23 19:50:32.333] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:50:34.923] fs.protected_hardlinks = 1 [2025-09-23 19:50:34.923] fs.protected_symlinks = 1 [2025-09-23 19:50:34.939] kernel.modules_disabled = 1 [2025-09-23 19:50:35.131] [2025-09-23 19:50:35.131] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:50:36.416] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:50:44.109] SBL1:1210.0.1.0 [2025-09-23 19:50:44.141] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:50:45.724] SBL2:1210.0.1.0 [2025-09-23 19:50:45.756] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:50:45.868] j-A [2025-09-23 19:50:53.223] The R5 Autosar Classic is running [2025-09-23 19:50:53.223] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:50:53.244] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:50:53.851] INIT: version 2.96 booting [2025-09-23 19:50:53.963] INIT: Entering runlevel: 5 [2025-09-23 19:50:54.107] mtd24 attached [2025-09-23 19:50:54.123] mtd28 attached [2025-09-23 19:50:54.139] mtd32 attached [2025-09-23 19:50:54.171] ubi0:textures is mounted. [2025-09-23 19:50:54.187] ubi1:animations is mounted. [2025-09-23 19:50:54.187] RTNETLINK answers: File exists [2025-09-23 19:50:54.246] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:50:54.246] ubi2:dml_code is mounted. [2025-09-23 19:50:54.246] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:50:54.246] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:50:54.246] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:50:54.246] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:50:54.246] data.LB_FadeInType0=100 [2025-09-23 19:50:54.246] data.CHLH_FadeInType0=0 [2025-09-23 19:50:54.246] data.WU_FadeInDelay=0 [2025-09-23 19:50:54.246] max_time_out=0 [2025-09-23 19:50:54.246] No splash screen [2025-09-23 19:50:54.246] stop dss Done [2025-09-23 19:50:54.324] /dev/mem opened. [2025-09-23 19:50:54.324] Memory mapped at address 0xffff80c18000. [2025-09-23 19:50:54.324] Read at address 0x00600018 (0xffff80c18018): 0x00000000 [2025-09-23 19:50:54.324] Write at address 0x00600018 (0xffff80c18018): 0x00400040, readback 0x00400040 [2025-09-23 19:50:54.324] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:50:54.324] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:50:54.564] Loaded PowerVR consumer services. [2025-09-23 19:50:54.611] Waiting data available... [2025-09-23 19:50:54.643] 512+0 records in [2025-09-23 19:50:54.643] 512+0 records out [2025-09-23 19:50:54.675] Starting syslogd/klogd: done [2025-09-23 19:50:54.691] DML Start [2025-09-23 19:50:54.867] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:50:55.059] DML res1: 0 [2025-09-23 19:50:55.506] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:50:55.506] Read Success [2025-09-23 19:50:55.506] Verifying certificate... [2025-09-23 19:50:55.793] Verified OK [2025-09-23 19:50:55.809] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:50:57.358] Verified OK [2025-09-23 19:50:57.358] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:50:58.011] Verified OK [2025-09-23 19:50:58.011] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:51:00.568] fs.protected_hardlinks = 1 [2025-09-23 19:51:00.585] fs.protected_symlinks = 1 [2025-09-23 19:51:00.585] kernel.modules_disabled = 1 [2025-09-23 19:51:00.792] [2025-09-23 19:51:00.792] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:51:02.103] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:51:09.827] SBL1:1210.0.1.0 [2025-09-23 19:51:09.859] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:51:11.442] SBL2:1210.0.1.0 [2025-09-23 19:51:11.474] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:51:11.586] j-A [2025-09-23 19:51:18.962] The R5 Autosar Classic is running [2025-09-23 19:51:18.962] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:51:18.962] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:51:19.569] INIT: version 2.96 booting [2025-09-23 19:51:19.681] INIT: Entering runlevel: 5 [2025-09-23 19:51:19.841] mtd32 attached [2025-09-23 19:51:19.841] mtd24 attached [2025-09-23 19:51:19.857] mtd28 attached [2025-09-23 19:51:19.905] ubi0:dml_code is mounted. [2025-09-23 19:51:19.905] RTNETLINK answers: File exists [2025-09-23 19:51:19.979] ubi2:animations is mounted. [2025-09-23 19:51:19.979] ubi1:textures is mounted. [2025-09-23 19:51:19.979] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:51:19.979] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:51:19.979] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:51:19.979] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:51:19.979] data.LB_FadeInType0=100 [2025-09-23 19:51:19.979] data.CHLH_FadeInType0=0 [2025-09-23 19:51:19.979] data.WU_FadeInDelay=0 [2025-09-23 19:51:19.979] max_time_out=0 [2025-09-23 19:51:19.979] No splash screen [2025-09-23 19:51:19.979] stop dss Done [2025-09-23 19:51:19.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:51:20.036] /dev/mem opened. [2025-09-23 19:51:20.036] Memory mapped at address 0xffff837fd000. [2025-09-23 19:51:20.036] Read at address 0x00600018 (0xffff837fd018): 0x00000000 [2025-09-23 19:51:20.036] Write at address 0x00600018 (0xffff837fd018): 0x00400040, readback 0x00400040 [2025-09-23 19:51:20.076] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:51:20.076] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:51:20.188] Loaded PowerVR consumer services. [2025-09-23 19:51:20.315] Waiting data available... [2025-09-23 19:51:20.331] 512+0 records in [2025-09-23 19:51:20.331] 512+0 records out [2025-09-23 19:51:20.363] Starting syslogd/klogd: done [2025-09-23 19:51:20.395] DML Start [2025-09-23 19:51:20.539] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:51:20.747] DML res1: 0 [2025-09-23 19:51:21.269] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:51:21.269] Read Success [2025-09-23 19:51:21.269] Verifying certificate... [2025-09-23 19:51:21.509] Verified OK [2025-09-23 19:51:21.524] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:51:23.305] Verified OK [2025-09-23 19:51:23.305] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:51:23.875] Verified OK [2025-09-23 19:51:23.875] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:51:26.385] fs.protected_hardlinks = 1 [2025-09-23 19:51:26.385] fs.protected_symlinks = 1 [2025-09-23 19:51:26.401] kernel.modules_disabled = 1 [2025-09-23 19:51:26.576] [2025-09-23 19:51:26.576] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:51:27.815] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:51:35.537] SBL1:1210.0.1.0 [2025-09-23 19:51:35.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:51:37.152] SBL2:1210.0.1.0 [2025-09-23 19:51:37.200] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:51:37.312] j-A [2025-09-23 19:51:44.651] The R5 Autosar Classic is running [2025-09-23 19:51:44.676] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:51:44.676] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:51:45.285] INIT: version 2.96 booting [2025-09-23 19:51:45.396] INIT: Entering runlevel: 5 [2025-09-23 19:51:45.557] mtd32 attached [2025-09-23 19:51:45.557] mtd24 attached [2025-09-23 19:51:45.572] mtd28 attached [2025-09-23 19:51:45.620] ubi0:dml_code is mounted. [2025-09-23 19:51:45.685] RTNETLINK answers: File exists [2025-09-23 19:51:45.685] ubi2:animations is mounted. [2025-09-23 19:51:45.685] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:51:45.685] ubi1:textures is mounted. [2025-09-23 19:51:45.685] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:51:45.685] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:51:45.685] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:51:45.685] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:51:45.685] data.LB_FadeInType0=100 [2025-09-23 19:51:45.685] data.CHLH_FadeInType0=0 [2025-09-23 19:51:45.685] data.WU_FadeInDelay=0 [2025-09-23 19:51:45.685] max_time_out=0 [2025-09-23 19:51:45.685] No splash screen [2025-09-23 19:51:45.685] stop dss Done [2025-09-23 19:51:45.753] /dev/mem opened. [2025-09-23 19:51:45.753] Memory mapped at address 0xffffa034a000. [2025-09-23 19:51:45.753] Read at address 0x00600018 (0xffffa034a018): 0x00000000 [2025-09-23 19:51:45.753] Write at address 0x00600018 (0xffffa034a018): 0x00400040, readback 0x00400040 [2025-09-23 19:51:45.753] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:51:45.785] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:51:46.009] Loaded PowerVR consumer services. [2025-09-23 19:51:46.025] Waiting data available... [2025-09-23 19:51:46.057] 512+0 records in [2025-09-23 19:51:46.057] 512+0 records out [2025-09-23 19:51:46.105] Starting syslogd/klogd: done [2025-09-23 19:51:46.121] DML Start [2025-09-23 19:51:46.265] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:51:46.473] DML res1: 0 [2025-09-23 19:51:46.957] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:51:46.957] Read Success [2025-09-23 19:51:46.957] Verifying certificate... [2025-09-23 19:51:47.182] Verified OK [2025-09-23 19:51:47.197] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:51:48.922] Verified OK [2025-09-23 19:51:48.922] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:51:49.495] Verified OK [2025-09-23 19:51:49.495] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:51:52.069] fs.protected_hardlinks = 1 [2025-09-23 19:51:52.069] fs.protected_symlinks = 1 [2025-09-23 19:51:52.085] kernel.modules_disabled = 1 [2025-09-23 19:51:52.276] [2025-09-23 19:51:52.276] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:51:53.564] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:52:01.280] SBL1:1210.0.1.0 [2025-09-23 19:52:01.312] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:52:02.894] SBL2:1210.0.1.0 [2025-09-23 19:52:02.926] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:52:03.038] j-A [2025-09-23 19:52:10.414] The R5 Autosar Classic is running [2025-09-23 19:52:10.414] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:52:10.414] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:52:11.022] INIT: version 2.96 booting [2025-09-23 19:52:11.134] INIT: Entering runlevel: 5 [2025-09-23 19:52:11.294] mtd28 attached [2025-09-23 19:52:11.294] mtd32 attached [2025-09-23 19:52:11.310] mtd24 attached [2025-09-23 19:52:11.358] RTNETLINK answers: File exists [2025-09-23 19:52:11.405] ubi1:dml_code is mounted. [2025-09-23 19:52:11.405] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:52:11.405] ubi0:animations is mounted. [2025-09-23 19:52:11.405] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:52:11.405] ubi2:textures is mounted. [2025-09-23 19:52:11.405] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:52:11.405] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:52:11.405] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:52:11.432] data.LB_FadeInType0=100 [2025-09-23 19:52:11.432] data.CHLH_FadeInType0=0 [2025-09-23 19:52:11.432] data.WU_FadeInDelay=0 [2025-09-23 19:52:11.432] max_time_out=0 [2025-09-23 19:52:11.432] No splash screen [2025-09-23 19:52:11.432] stop dss Done [2025-09-23 19:52:11.464] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:52:11.480] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:52:11.512] /dev/mem opened. [2025-09-23 19:52:11.512] Memory mapped at address 0xffffabcae000. [2025-09-23 19:52:11.512] Read at address 0x00600018 (0xffffabcae018): 0x00000000 [2025-09-23 19:52:11.512] Write at address 0x00600018 (0xffffabcae018): 0x00400040, readback 0x00400040 [2025-09-23 19:52:11.736] Loaded PowerVR consumer services. [2025-09-23 19:52:11.752] Waiting data available... [2025-09-23 19:52:11.784] 512+0 records in [2025-09-23 19:52:11.784] 512+0 records out [2025-09-23 19:52:11.801] Starting syslogd/klogd: done [2025-09-23 19:52:11.833] DML Start [2025-09-23 19:52:12.008] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:52:12.185] DML res1: 0 [2025-09-23 19:52:12.648] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:52:12.669] Read Success [2025-09-23 19:52:12.669] Verifying certificate... [2025-09-23 19:52:12.909] Verified OK [2025-09-23 19:52:12.925] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:52:14.695] Verified OK [2025-09-23 19:52:14.695] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:52:15.239] Verified OK [2025-09-23 19:52:15.239] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:52:17.734] fs.protected_hardlinks = 1 [2025-09-23 19:52:17.734] fs.protected_symlinks = 1 [2025-09-23 19:52:17.750] kernel.modules_disabled = 1 [2025-09-23 19:52:17.941] [2025-09-23 19:52:17.941] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:52:19.235] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:52:26.993] SBL1:1210.0.1.0 [2025-09-23 19:52:27.041] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:52:28.607] SBL2:1210.0.1.0 [2025-09-23 19:52:28.655] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:52:28.767] j-A [2025-09-23 19:52:36.107] The R5 Autosar Classic is running [2025-09-23 19:52:36.132] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:52:36.132] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:52:36.740] INIT: version 2.96 booting [2025-09-23 19:52:36.852] INIT: Entering runlevel: 5 [2025-09-23 19:52:37.012] mtd28 attached [2025-09-23 19:52:37.012] mtd24 attached [2025-09-23 19:52:37.044] mtd32 attached [2025-09-23 19:52:37.060] ubi0:animations is mounted. [2025-09-23 19:52:37.148] RTNETLINK answers: File exists [2025-09-23 19:52:37.148] ubi2:dml_code is mounted. [2025-09-23 19:52:37.148] ubi1:textures is mounted. [2025-09-23 19:52:37.148] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:52:37.148] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:52:37.148] data.LB_FadeInType0=100 [2025-09-23 19:52:37.148] data.CHLH_FadeInType0=0 [2025-09-23 19:52:37.148] data.WU_FadeInDelay=0 [2025-09-23 19:52:37.148] max_time_out=0 [2025-09-23 19:52:37.148] No splash screen [2025-09-23 19:52:37.148] stop dss Done [2025-09-23 19:52:37.148] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:52:37.148] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:52:37.148] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:52:37.197] /dev/mem opened. [2025-09-23 19:52:37.197] Memory mapped at address 0xffff9ace8000. [2025-09-23 19:52:37.197] Read at address 0x00600018 (0xffff9ace8018): 0x00000000 [2025-09-23 19:52:37.197] Write at address 0x00600018 (0xffff9ace8018): 0x00400040, readback 0x00400040 [2025-09-23 19:52:37.245] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:52:37.261] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:52:37.358] Loaded PowerVR consumer services. [2025-09-23 19:52:37.501] Waiting data available... [2025-09-23 19:52:37.517] 512+0 records in [2025-09-23 19:52:37.517] 512+0 records out [2025-09-23 19:52:37.565] Starting syslogd/klogd: done [2025-09-23 19:52:37.581] DML Start [2025-09-23 19:52:37.726] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:52:37.933] DML res1: 0 [2025-09-23 19:52:38.455] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:52:38.455] Read Success [2025-09-23 19:52:38.455] Verifying certificate... [2025-09-23 19:52:38.711] Verified OK [2025-09-23 19:52:38.743] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:52:40.365] Verified OK [2025-09-23 19:52:40.365] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:52:40.953] Verified OK [2025-09-23 19:52:40.953] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:52:43.575] fs.protected_hardlinks = 1 [2025-09-23 19:52:43.591] fs.protected_symlinks = 1 [2025-09-23 19:52:43.591] kernel.modules_disabled = 1 [2025-09-23 19:52:43.798] [2025-09-23 19:52:43.798] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:52:45.007] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:52:52.734] SBL1:1210.0.1.0 [2025-09-23 19:52:52.766] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:52:54.348] SBL2:1210.0.1.0 [2025-09-23 19:52:54.380] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:52:54.492] j-A [2025-09-23 19:53:01.847] The R5 Autosar Classic is running [2025-09-23 19:53:01.847] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:53:01.868] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:53:02.476] INIT: version 2.96 booting [2025-09-23 19:53:02.587] INIT: Entering runlevel: 5 [2025-09-23 19:53:02.747] mtd24 attached [2025-09-23 19:53:02.747] mtd32 attached [2025-09-23 19:53:02.763] mtd28 attached [2025-09-23 19:53:02.795] ubi0:textures is mounted. [2025-09-23 19:53:02.812] RTNETLINK answers: File exists [2025-09-23 19:53:02.870] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:53:02.870] ubi2:animations is mounted. [2025-09-23 19:53:02.870] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:53:02.870] ubi1:dml_code is mounted. [2025-09-23 19:53:02.870] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:53:02.870] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:53:02.870] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:53:02.870] data.LB_FadeInType0=100 [2025-09-23 19:53:02.870] data.CHLH_FadeInType0=0 [2025-09-23 19:53:02.870] data.WU_FadeInDelay=0 [2025-09-23 19:53:02.870] max_time_out=0 [2025-09-23 19:53:02.870] No splash screen [2025-09-23 19:53:02.870] stop dss Done [2025-09-23 19:53:02.918] /dev/mem opened. [2025-09-23 19:53:02.918] Memory mapped at address 0xffffac053000. [2025-09-23 19:53:02.950] Read at address 0x00600018 (0xffffac053018): 0x00000000 [2025-09-23 19:53:02.950] Write at address 0x00600018 (0xffffac053018): 0x00400040, readback 0x00400040 [2025-09-23 19:53:02.950] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:53:02.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:53:03.110] Loaded PowerVR consumer services. [2025-09-23 19:53:03.237] Waiting data available... [2025-09-23 19:53:03.253] 512+0 records in [2025-09-23 19:53:03.253] 512+0 records out [2025-09-23 19:53:03.285] Starting syslogd/klogd: done [2025-09-23 19:53:03.301] DML Start [2025-09-23 19:53:03.446] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:53:03.654] DML res1: 0 [2025-09-23 19:53:04.132] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:53:04.148] Read Success [2025-09-23 19:53:04.148] Verifying certificate... [2025-09-23 19:53:04.421] Verified OK [2025-09-23 19:53:04.436] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:53:06.191] Verified OK [2025-09-23 19:53:06.191] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:53:06.672] Verified OK [2025-09-23 19:53:06.672] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:53:09.150] fs.protected_hardlinks = 1 [2025-09-23 19:53:09.166] fs.protected_symlinks = 1 [2025-09-23 19:53:09.166] kernel.modules_disabled = 1 [2025-09-23 19:53:09.374] [2025-09-23 19:53:09.374] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:53:10.717] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:53:18.454] SBL1:1210.0.1.0 [2025-09-23 19:53:18.486] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:53:20.069] SBL2:1210.0.1.0 [2025-09-23 19:53:20.117] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:53:20.212] j-A [2025-09-23 19:53:27.567] The R5 Autosar Classic is running [2025-09-23 19:53:27.589] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:53:27.589] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:53:28.196] INIT: version 2.96 booting [2025-09-23 19:53:28.309] INIT: Entering runlevel: 5 [2025-09-23 19:53:28.468] mtd32 attached [2025-09-23 19:53:28.485] mtd28 attached [2025-09-23 19:53:28.485] mtd24 attached [2025-09-23 19:53:28.533] RTNETLINK answers: File exists [2025-09-23 19:53:28.596] ubi0:dml_code is mounted. [2025-09-23 19:53:28.596] ubi1:animations is mounted. [2025-09-23 19:53:28.596] ubi2:textures is mounted. [2025-09-23 19:53:28.596] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:53:28.596] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:53:28.596] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:53:28.596] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:53:28.596] data.LB_FadeInType0=100 [2025-09-23 19:53:28.596] data.CHLH_FadeInType0=0 [2025-09-23 19:53:28.596] data.WU_FadeInDelay=0 [2025-09-23 19:53:28.596] max_time_out=0 [2025-09-23 19:53:28.596] No splash screen [2025-09-23 19:53:28.596] stop dss Done [2025-09-23 19:53:28.596] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:53:28.667] /dev/mem opened. [2025-09-23 19:53:28.668] Memory mapped at address 0xffff81ebc000. [2025-09-23 19:53:28.668] Read at address 0x00600018 (0xffff81ebc018): 0x00000000 [2025-09-23 19:53:28.668] Write at address 0x00600018 (0xffff81ebc018): 0x00400040, readback 0x00400040 [2025-09-23 19:53:28.668] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:53:28.668] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:53:28.938] Loaded PowerVR consumer services. [2025-09-23 19:53:28.938] Waiting data available... [2025-09-23 19:53:28.969] 512+0 records in [2025-09-23 19:53:28.969] 512+0 records out [2025-09-23 19:53:29.017] Starting syslogd/klogd: done [2025-09-23 19:53:29.033] DML Start [2025-09-23 19:53:29.209] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:53:29.417] DML res1: 0 [2025-09-23 19:53:29.865] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:53:29.886] Read Success [2025-09-23 19:53:29.886] Verifying certificate... [2025-09-23 19:53:30.141] Verified OK [2025-09-23 19:53:30.157] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:53:31.831] Verified OK [2025-09-23 19:53:31.831] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:53:32.402] Verified OK [2025-09-23 19:53:32.402] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:53:34.914] fs.protected_hardlinks = 1 [2025-09-23 19:53:34.914] fs.protected_symlinks = 1 [2025-09-23 19:53:34.929] kernel.modules_disabled = 1 [2025-09-23 19:53:35.122] [2025-09-23 19:53:35.122] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:53:36.456] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:53:44.191] SBL1:1210.0.1.0 [2025-09-23 19:53:44.222] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:53:45.806] SBL2:1210.0.1.0 [2025-09-23 19:53:45.837] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:53:45.949] j-A [2025-09-23 19:53:53.304] The R5 Autosar Classic is running [2025-09-23 19:53:53.304] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:53:53.325] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:53:53.932] INIT: version 2.96 booting [2025-09-23 19:53:54.044] INIT: Entering runlevel: 5 [2025-09-23 19:53:54.203] mtd32 attached [2025-09-23 19:53:54.203] mtd28 attached [2025-09-23 19:53:54.219] mtd24 attached [2025-09-23 19:53:54.267] RTNETLINK answers: File exists [2025-09-23 19:53:54.334] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:53:54.334] ubi1:animations is mounted. [2025-09-23 19:53:54.334] ubi0:dml_code is mounted. [2025-09-23 19:53:54.334] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:53:54.334] ubi2:textures is mounted. [2025-09-23 19:53:54.334] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:53:54.334] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:53:54.334] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:53:54.334] data.LB_FadeInType0=100 [2025-09-23 19:53:54.334] data.CHLH_FadeInType0=0 [2025-09-23 19:53:54.334] data.WU_FadeInDelay=0 [2025-09-23 19:53:54.334] max_time_out=0 [2025-09-23 19:53:54.334] No splash screen [2025-09-23 19:53:54.334] stop dss Done [2025-09-23 19:53:54.419] /dev/mem opened. [2025-09-23 19:53:54.419] Memory mapped at address 0xffff9070a000. [2025-09-23 19:53:54.419] Read at address 0x00600018 (0xffff9070a018): 0x00000000 [2025-09-23 19:53:54.419] Write at address 0x00600018 (0xffff9070a018): 0x00400040, readback 0x00400040 [2025-09-23 19:53:54.451] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:53:54.451] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:53:54.643] Loaded PowerVR consumer services. [2025-09-23 19:53:54.691] Waiting data available... [2025-09-23 19:53:54.707] 512+0 records in [2025-09-23 19:53:54.723] 512+0 records out [2025-09-23 19:53:54.739] Starting syslogd/klogd: done [2025-09-23 19:53:54.755] DML Start [2025-09-23 19:53:54.915] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:53:55.107] DML res1: 0 [2025-09-23 19:53:55.601] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:53:55.601] Read Success [2025-09-23 19:53:55.601] Verifying certificate... [2025-09-23 19:53:55.840] Verified OK [2025-09-23 19:53:55.856] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:53:57.528] Verified OK [2025-09-23 19:53:57.528] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:53:58.191] Verified OK [2025-09-23 19:53:58.191] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:54:00.814] fs.protected_hardlinks = 1 [2025-09-23 19:54:00.814] fs.protected_symlinks = 1 [2025-09-23 19:54:00.829] kernel.modules_disabled = 1 [2025-09-23 19:54:01.038] [2025-09-23 19:54:01.038] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:54:02.168] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:54:09.920] SBL1:1210.0.1.0 [2025-09-23 19:54:09.952] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:54:11.535] SBL2:1210.0.1.0 [2025-09-23 19:54:11.567] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:54:11.678] j-A [2025-09-23 19:54:19.033] The R5 Autosar Classic is running [2025-09-23 19:54:19.033] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:54:19.054] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:54:19.661] INIT: version 2.96 booting [2025-09-23 19:54:19.773] INIT: Entering runlevel: 5 [2025-09-23 19:54:19.933] mtd32 attached [2025-09-23 19:54:19.949] mtd28 attached [2025-09-23 19:54:19.949] mtd24 attached [2025-09-23 19:54:19.998] RTNETLINK answers: File exists [2025-09-23 19:54:20.064] ubi0:dml_code is mounted. [2025-09-23 19:54:20.064] ubi2:textures is mounted. [2025-09-23 19:54:20.064] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:54:20.064] ubi1:animations is mounted. [2025-09-23 19:54:20.064] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:54:20.064] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:54:20.064] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:54:20.064] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:54:20.064] data.LB_FadeInType0=100 [2025-09-23 19:54:20.064] data.CHLH_FadeInType0=0 [2025-09-23 19:54:20.064] data.WU_FadeInDelay=0 [2025-09-23 19:54:20.064] max_time_out=0 [2025-09-23 19:54:20.064] No splash screen [2025-09-23 19:54:20.064] stop dss Done [2025-09-23 19:54:20.137] /dev/mem opened. [2025-09-23 19:54:20.137] Memory mapped at address 0xffff9a1a6000. [2025-09-23 19:54:20.137] Read at address 0x00600018 (0xffff9a1a6018): 0x00000000 [2025-09-23 19:54:20.137] Write at address 0x00600018 (0xffff9a1a6018): 0x00400040, readback 0x00400040 [2025-09-23 19:54:20.137] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:54:20.169] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:54:20.314] Loaded PowerVR consumer services. [2025-09-23 19:54:20.409] Waiting data available... [2025-09-23 19:54:20.441] 512+0 records in [2025-09-23 19:54:20.441] 512+0 records out [2025-09-23 19:54:20.489] Starting syslogd/klogd: done [2025-09-23 19:54:20.505] DML Start [2025-09-23 19:54:20.697] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:54:20.904] DML res1: 0 [2025-09-23 19:54:21.304] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:54:21.326] Read Success [2025-09-23 19:54:21.326] Verifying certificate... [2025-09-23 19:54:21.565] Verified OK [2025-09-23 19:54:21.582] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:54:23.068] Verified OK [2025-09-23 19:54:23.068] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:54:23.680] Verified OK [2025-09-23 19:54:23.680] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:54:26.447] fs.protected_hardlinks = 1 [2025-09-23 19:54:26.447] fs.protected_symlinks = 1 [2025-09-23 19:54:26.463] kernel.modules_disabled = 1 [2025-09-23 19:54:26.638] [2025-09-23 19:54:26.638] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:54:27.945] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:54:35.657] SBL1:1210.0.1.0 [2025-09-23 19:54:35.689] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:54:37.271] SBL2:1210.0.1.0 [2025-09-23 19:54:37.303] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:54:37.415] j-A [2025-09-23 19:54:44.791] The R5 Autosar Classic is running [2025-09-23 19:54:44.791] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:54:44.791] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:54:45.398] INIT: version 2.96 booting [2025-09-23 19:54:45.510] INIT: Entering runlevel: 5 [2025-09-23 19:54:45.654] mtd32 attached [2025-09-23 19:54:45.670] mtd28 attached [2025-09-23 19:54:45.670] mtd24 attached [2025-09-23 19:54:45.718] ubi0:dml_code is mounted. [2025-09-23 19:54:45.734] RTNETLINK answers: File exists [2025-09-23 19:54:45.787] ubi2:textures is mounted. [2025-09-23 19:54:45.787] ubi1:animations is mounted. [2025-09-23 19:54:45.787] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:54:45.787] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:54:45.787] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:54:45.787] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:54:45.787] data.LB_FadeInType0=100 [2025-09-23 19:54:45.787] data.CHLH_FadeInType0=0 [2025-09-23 19:54:45.787] data.WU_FadeInDelay=0 [2025-09-23 19:54:45.787] max_time_out=0 [2025-09-23 19:54:45.787] No splash screen [2025-09-23 19:54:45.787] stop dss Done [2025-09-23 19:54:45.787] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:54:45.866] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:54:45.866] /dev/mem opened. [2025-09-23 19:54:45.866] Memory mapped at address 0xffff89325000. [2025-09-23 19:54:45.866] Read at address 0x00600018 (0xffff89325018): 0x00000000 [2025-09-23 19:54:45.866] Write at address 0x00600018 (0xffff89325018): 0x00400040, readback 0x00400040 [2025-09-23 19:54:45.866] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:54:46.121] Loaded PowerVR consumer services. [2025-09-23 19:54:46.137] Waiting data available... [2025-09-23 19:54:46.169] 512+0 records in [2025-09-23 19:54:46.169] 512+0 records out [2025-09-23 19:54:46.185] Starting syslogd/klogd: done [2025-09-23 19:54:46.201] DML Start [2025-09-23 19:54:46.362] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:54:46.553] DML res1: 0 [2025-09-23 19:54:47.124] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:54:47.124] Read Success [2025-09-23 19:54:47.124] Verifying certificate... [2025-09-23 19:54:47.349] Verified OK [2025-09-23 19:54:47.365] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:54:49.019] Verified OK [2025-09-23 19:54:49.019] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:54:49.601] Verified OK [2025-09-23 19:54:49.601] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:54:52.175] fs.protected_hardlinks = 1 [2025-09-23 19:54:52.191] fs.protected_symlinks = 1 [2025-09-23 19:54:52.191] kernel.modules_disabled = 1 [2025-09-23 19:54:52.383] [2025-09-23 19:54:52.383] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:54:53.613] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:55:01.378] SBL1:1210.0.1.0 [2025-09-23 19:55:01.426] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:55:02.993] SBL2:1210.0.1.0 [2025-09-23 19:55:03.041] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:55:03.153] j-A [2025-09-23 19:55:10.493] The R5 Autosar Classic is running [2025-09-23 19:55:10.516] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:55:10.516] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:55:11.124] INIT: version 2.96 booting [2025-09-23 19:55:11.236] INIT: Entering runlevel: 5 [2025-09-23 19:55:11.379] mtd28 attached [2025-09-23 19:55:11.395] mtd32 attached [2025-09-23 19:55:11.412] mtd24 attached [2025-09-23 19:55:11.428] ubi0:animations is mounted. [2025-09-23 19:55:11.460] RTNETLINK answers: File exists [2025-09-23 19:55:11.460] ubi2:textures is mounted. [2025-09-23 19:55:11.521] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:55:11.521] ubi1:dml_code is mounted. [2025-09-23 19:55:11.521] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:55:11.521] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:55:11.521] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:55:11.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:55:11.521] data.LB_FadeInType0=100 [2025-09-23 19:55:11.521] data.CHLH_FadeInType0=0 [2025-09-23 19:55:11.521] data.WU_FadeInDelay=0 [2025-09-23 19:55:11.521] max_time_out=0 [2025-09-23 19:55:11.521] No splash screen [2025-09-23 19:55:11.521] stop dss Done [2025-09-23 19:55:11.553] /dev/mem opened. [2025-09-23 19:55:11.553] Memory mapped at address 0xffff955d7000. [2025-09-23 19:55:11.592] Read at address 0x00600018 (0xffff955d7018): 0x00000000 [2025-09-23 19:55:11.592] Write at address 0x00600018 (0xffff955d7018): 0x00400040, readback 0x00400040 [2025-09-23 19:55:11.592] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:55:11.592] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:55:11.784] Loaded PowerVR consumer services. [2025-09-23 19:55:11.897] Waiting data available... [2025-09-23 19:55:11.913] 512+0 records in [2025-09-23 19:55:11.913] 512+0 records out [2025-09-23 19:55:11.944] Starting syslogd/klogd: done [2025-09-23 19:55:11.960] DML Start [2025-09-23 19:55:12.168] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:55:12.408] DML res1: 0 [2025-09-23 19:55:12.740] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:55:12.740] Read Success [2025-09-23 19:55:12.740] Verifying certificate... [2025-09-23 19:55:12.981] Verified OK [2025-09-23 19:55:12.981] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:55:14.753] Verified OK [2025-09-23 19:55:14.753] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:55:15.387] Verified OK [2025-09-23 19:55:15.387] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:55:17.976] fs.protected_hardlinks = 1 [2025-09-23 19:55:17.976] fs.protected_symlinks = 1 [2025-09-23 19:55:17.992] kernel.modules_disabled = 1 [2025-09-23 19:55:18.184] [2025-09-23 19:55:18.184] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:55:19.476] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:55:27.143] SBL1:1210.0.1.0 [2025-09-23 19:55:27.191] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:55:28.758] SBL2:1210.0.1.0 [2025-09-23 19:55:28.806] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:55:28.917] j-A [2025-09-23 19:55:36.290] The R5 Autosar Classic is running [2025-09-23 19:55:36.290] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:55:36.290] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:55:36.897] INIT: version 2.96 booting [2025-09-23 19:55:37.010] INIT: Entering runlevel: 5 [2025-09-23 19:55:37.169] mtd28 attached [2025-09-23 19:55:37.169] mtd24 attached [2025-09-23 19:55:37.185] mtd32 attached [2025-09-23 19:55:37.233] ubi0:animations is mounted. [2025-09-23 19:55:37.249] RTNETLINK answers: File exists [2025-09-23 19:55:37.249] ubi1:textures is mounted. [2025-09-23 19:55:37.303] ubi2:dml_code is mounted. [2025-09-23 19:55:37.303] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:55:37.303] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:55:37.303] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:55:37.303] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:55:37.303] data.LB_FadeInType0=100 [2025-09-23 19:55:37.303] data.CHLH_FadeInType0=0 [2025-09-23 19:55:37.303] data.WU_FadeInDelay=0 [2025-09-23 19:55:37.303] max_time_out=0 [2025-09-23 19:55:37.303] No splash screen [2025-09-23 19:55:37.303] stop dss Done [2025-09-23 19:55:37.303] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:55:37.335] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:55:37.377] /dev/mem opened. [2025-09-23 19:55:37.377] Memory mapped at address 0xffff812e4000. [2025-09-23 19:55:37.377] Read at address 0x00600018 (0xffff812e4018): 0x00000000 [2025-09-23 19:55:37.377] Write at address 0x00600018 (0xffff812e4018): 0x00400040, readback 0x00400040 [2025-09-23 19:55:37.377] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:55:37.585] Loaded PowerVR consumer services. [2025-09-23 19:55:37.665] Waiting data available... [2025-09-23 19:55:37.697] 512+0 records in [2025-09-23 19:55:37.697] 512+0 records out [2025-09-23 19:55:37.729] Starting syslogd/klogd: done [2025-09-23 19:55:37.745] DML Start [2025-09-23 19:55:37.905] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:55:38.145] DML res1: 0 [2025-09-23 19:55:38.560] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:55:38.560] Read Success [2025-09-23 19:55:38.576] Verifying certificate... [2025-09-23 19:55:38.832] Verified OK [2025-09-23 19:55:38.848] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:55:40.511] Verified OK [2025-09-23 19:55:40.511] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:55:41.039] Verified OK [2025-09-23 19:55:41.039] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:55:43.725] fs.protected_hardlinks = 1 [2025-09-23 19:55:43.741] fs.protected_symlinks = 1 [2025-09-23 19:55:43.741] kernel.modules_disabled = 1 [2025-09-23 19:55:43.916] [2025-09-23 19:55:43.916] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:55:45.166] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:55:52.896] SBL1:1210.0.1.0 [2025-09-23 19:55:52.944] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:55:54.511] SBL2:1210.0.1.0 [2025-09-23 19:55:54.559] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:55:54.671] j-A [2025-09-23 19:56:02.043] The R5 Autosar Classic is running [2025-09-23 19:56:02.043] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:56:02.043] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:56:02.651] INIT: version 2.96 booting [2025-09-23 19:56:02.762] INIT: Entering runlevel: 5 [2025-09-23 19:56:02.923] mtd32 attached [2025-09-23 19:56:02.938] mtd28 attached [2025-09-23 19:56:02.938] mtd24 attached [2025-09-23 19:56:02.987] ubi0:dml_code is mounted. [2025-09-23 19:56:03.052] RTNETLINK answers: File exists [2025-09-23 19:56:03.052] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:56:03.052] ubi1:animations is mounted. [2025-09-23 19:56:03.052] ubi2:textures is mounted. [2025-09-23 19:56:03.052] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:56:03.052] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:56:03.052] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:56:03.052] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:56:03.052] data.LB_FadeInType0=100 [2025-09-23 19:56:03.052] data.CHLH_FadeInType0=0 [2025-09-23 19:56:03.052] data.WU_FadeInDelay=0 [2025-09-23 19:56:03.052] max_time_out=0 [2025-09-23 19:56:03.052] No splash screen [2025-09-23 19:56:03.052] stop dss Done [2025-09-23 19:56:03.132] /dev/mem opened. [2025-09-23 19:56:03.132] Memory mapped at address 0xffff8bc9e000. [2025-09-23 19:56:03.132] Read at address 0x00600018 (0xffff8bc9e018): 0x00000000 [2025-09-23 19:56:03.132] Write at address 0x00600018 (0xffff8bc9e018): 0x00400040, readback 0x00400040 [2025-09-23 19:56:03.132] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:56:03.148] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:56:03.245] Loaded PowerVR consumer services. [2025-09-23 19:56:03.404] Waiting data available... [2025-09-23 19:56:03.420] 512+0 records in [2025-09-23 19:56:03.420] 512+0 records out [2025-09-23 19:56:03.468] Starting syslogd/klogd: done [2025-09-23 19:56:03.484] DML Start [2025-09-23 19:56:03.676] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:56:03.899] DML res1: 0 [2025-09-23 19:56:04.291] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:56:04.291] Read Success [2025-09-23 19:56:04.291] Verifying certificate... [2025-09-23 19:56:04.546] Verified OK [2025-09-23 19:56:04.562] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:56:06.145] Verified OK [2025-09-23 19:56:06.145] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:56:06.769] Verified OK [2025-09-23 19:56:06.769] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:56:09.439] fs.protected_hardlinks = 1 [2025-09-23 19:56:09.439] fs.protected_symlinks = 1 [2025-09-23 19:56:09.455] kernel.modules_disabled = 1 [2025-09-23 19:56:09.662] [2025-09-23 19:56:09.662] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:56:10.916] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:56:18.640] SBL1:1210.0.1.0 [2025-09-23 19:56:18.672] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:56:20.254] SBL2:1210.0.1.0 [2025-09-23 19:56:20.286] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:56:20.398] j-A [2025-09-23 19:56:27.755] The R5 Autosar Classic is running [2025-09-23 19:56:27.755] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:56:27.776] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:56:28.383] INIT: version 2.96 booting [2025-09-23 19:56:28.495] INIT: Entering runlevel: 5 [2025-09-23 19:56:28.639] mtd24 attached [2025-09-23 19:56:28.655] mtd32 attached [2025-09-23 19:56:28.671] mtd28 attached [2025-09-23 19:56:28.719] RTNETLINK answers: File exists [2025-09-23 19:56:28.780] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:56:28.780] ubi0:textures is mounted. [2025-09-23 19:56:28.780] ubi1:dml_code is mounted. [2025-09-23 19:56:28.780] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:56:28.780] ubi2:animations is mounted. [2025-09-23 19:56:28.780] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:56:28.780] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:56:28.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:56:28.780] data.LB_FadeInType0=100 [2025-09-23 19:56:28.780] data.CHLH_FadeInType0=0 [2025-09-23 19:56:28.780] data.WU_FadeInDelay=0 [2025-09-23 19:56:28.780] max_time_out=0 [2025-09-23 19:56:28.780] No splash screen [2025-09-23 19:56:28.780] stop dss Done [2025-09-23 19:56:28.796] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:56:28.811] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:56:28.846] /dev/mem opened. [2025-09-23 19:56:28.846] Memory mapped at address 0xffffae58a000. [2025-09-23 19:56:28.846] Read at address 0x00600018 (0xffffae58a018): 0x00000000 [2025-09-23 19:56:28.846] Write at address 0x00600018 (0xffffae58a018): 0x00400040, readback 0x00400040 [2025-09-23 19:56:29.118] Waiting data available... [2025-09-23 19:56:29.134] Loaded PowerVR consumer services. [2025-09-23 19:56:29.165] 512+0 records in [2025-09-23 19:56:29.182] 512+0 records out [2025-09-23 19:56:29.197] Starting syslogd/klogd: done [2025-09-23 19:56:29.214] DML Start [2025-09-23 19:56:29.390] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:56:29.597] DML res1: 0 [2025-09-23 19:56:30.085] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:56:30.085] Read Success [2025-09-23 19:56:30.085] Verifying certificate... [2025-09-23 19:56:30.356] Verified OK [2025-09-23 19:56:30.372] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:56:31.960] Verified OK [2025-09-23 19:56:31.960] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:56:32.577] Verified OK [2025-09-23 19:56:32.577] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:56:35.279] fs.protected_hardlinks = 1 [2025-09-23 19:56:35.279] fs.protected_symlinks = 1 [2025-09-23 19:56:35.295] kernel.modules_disabled = 1 [2025-09-23 19:56:35.486] [2025-09-23 19:56:35.486] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:56:36.656] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:56:44.368] SBL1:1210.0.1.0 [2025-09-23 19:56:44.400] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:56:45.983] SBL2:1210.0.1.0 [2025-09-23 19:56:46.030] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:56:46.127] j-A [2025-09-23 19:56:53.483] The R5 Autosar Classic is running [2025-09-23 19:56:53.483] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:56:53.504] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:56:54.111] INIT: version 2.96 booting [2025-09-23 19:56:54.223] INIT: Entering runlevel: 5 [2025-09-23 19:56:54.383] mtd28 attached [2025-09-23 19:56:54.383] mtd24 attached [2025-09-23 19:56:54.399] mtd32 attached [2025-09-23 19:56:54.480] RTNETLINK answers: File exists [2025-09-23 19:56:54.480] ubi0:animations is mounted. [2025-09-23 19:56:54.480] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:56:54.480] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:56:54.480] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:56:54.480] ubi2:dml_code is mounted. [2025-09-23 19:56:54.480] ubi1:textures is mounted. [2025-09-23 19:56:54.480] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:56:54.480] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:56:54.517] data.LB_FadeInType0=100 [2025-09-23 19:56:54.517] data.CHLH_FadeInType0=0 [2025-09-23 19:56:54.517] data.WU_FadeInDelay=0 [2025-09-23 19:56:54.517] max_time_out=0 [2025-09-23 19:56:54.517] No splash screen [2025-09-23 19:56:54.517] stop dss Done [2025-09-23 19:56:54.562] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:56:54.562] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:56:54.595] /dev/mem opened. [2025-09-23 19:56:54.595] Memory mapped at address 0xffff95e80000. [2025-09-23 19:56:54.595] Read at address 0x00600018 (0xffff95e80018): 0x00000000 [2025-09-23 19:56:54.595] Write at address 0x00600018 (0xffff95e80018): 0x00400040, readback 0x00400040 [2025-09-23 19:56:54.756] Loaded PowerVR consumer services. [2025-09-23 19:56:54.852] Waiting data available... [2025-09-23 19:56:54.868] 512+0 records in [2025-09-23 19:56:54.884] 512+0 records out [2025-09-23 19:56:54.932] Starting syslogd/klogd: done [2025-09-23 19:56:54.948] DML Start [2025-09-23 19:56:55.108] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:56:55.316] DML res1: 0 [2025-09-23 19:56:55.786] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:56:55.786] Read Success [2025-09-23 19:56:55.786] Verifying certificate... [2025-09-23 19:56:56.009] Verified OK [2025-09-23 19:56:56.025] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:56:57.769] Verified OK [2025-09-23 19:56:57.769] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:56:58.328] Verified OK [2025-09-23 19:56:58.349] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:57:00.890] fs.protected_hardlinks = 1 [2025-09-23 19:57:00.890] fs.protected_symlinks = 1 [2025-09-23 19:57:00.890] kernel.modules_disabled = 1 [2025-09-23 19:57:01.065] [2025-09-23 19:57:01.065] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:57:02.356] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:57:10.111] SBL1:1210.0.1.0 [2025-09-23 19:57:10.158] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:57:11.725] SBL2:1210.0.1.0 [2025-09-23 19:57:11.773] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:57:11.885] j-A [2025-09-23 19:57:19.257] The R5 Autosar Classic is running [2025-09-23 19:57:19.257] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:57:19.257] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:57:19.864] INIT: version 2.96 booting [2025-09-23 19:57:19.976] INIT: Entering runlevel: 5 [2025-09-23 19:57:20.136] mtd32 attached [2025-09-23 19:57:20.136] mtd28 attached [2025-09-23 19:57:20.152] mtd24 attached [2025-09-23 19:57:20.235] RTNETLINK answers: File exists [2025-09-23 19:57:20.235] ubi0:dml_code is mounted. [2025-09-23 19:57:20.235] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:57:20.235] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:57:20.235] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:57:20.235] ubi1:animations is mounted. [2025-09-23 19:57:20.235] ubi2:textures is mounted. [2025-09-23 19:57:20.235] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:57:20.235] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:57:20.259] data.LB_FadeInType0=100 [2025-09-23 19:57:20.259] data.CHLH_FadeInType0=0 [2025-09-23 19:57:20.259] data.WU_FadeInDelay=0 [2025-09-23 19:57:20.259] max_time_out=0 [2025-09-23 19:57:20.259] No splash screen [2025-09-23 19:57:20.259] stop dss Done [2025-09-23 19:57:20.275] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:57:20.291] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:57:20.342] /dev/mem opened. [2025-09-23 19:57:20.342] Memory mapped at address 0xffffb152b000. [2025-09-23 19:57:20.342] Read at address 0x00600018 (0xffffb152b018): 0x00000000 [2025-09-23 19:57:20.342] Write at address 0x00600018 (0xffffb152b018): 0x00400040, readback 0x00400040 [2025-09-23 19:57:20.598] Loaded PowerVR consumer services. [2025-09-23 19:57:20.614] Waiting data available... [2025-09-23 19:57:20.662] 512+0 records in [2025-09-23 19:57:20.662] 512+0 records out [2025-09-23 19:57:20.694] Starting syslogd/klogd: done [2025-09-23 19:57:20.710] DML Start [2025-09-23 19:57:20.901] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:57:21.125] DML res1: 0 [2025-09-23 19:57:21.538] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:57:21.538] Read Success [2025-09-23 19:57:21.538] Verifying certificate... [2025-09-23 19:57:21.778] Verified OK [2025-09-23 19:57:21.794] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:57:23.452] Verified OK [2025-09-23 19:57:23.452] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:57:24.099] Verified OK [2025-09-23 19:57:24.099] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:57:26.722] fs.protected_hardlinks = 1 [2025-09-23 19:57:26.722] fs.protected_symlinks = 1 [2025-09-23 19:57:26.738] kernel.modules_disabled = 1 [2025-09-23 19:57:26.930] [2025-09-23 19:57:26.930] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:57:28.170] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:57:35.855] SBL1:1210.0.1.0 [2025-09-23 19:57:35.903] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:57:37.470] SBL2:1210.0.1.0 [2025-09-23 19:57:37.518] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:57:37.630] j-A [2025-09-23 19:57:44.969] The R5 Autosar Classic is running [2025-09-23 19:57:44.994] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:57:44.994] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:57:45.601] INIT: version 2.96 booting [2025-09-23 19:57:45.714] INIT: Entering runlevel: 5 [2025-09-23 19:57:45.873] mtd28 attached [2025-09-23 19:57:45.889] mtd24 attached [2025-09-23 19:57:45.905] ubi0:animations is mounted. [2025-09-23 19:57:45.921] mtd32 attached [2025-09-23 19:57:45.937] ubi1:textures is mounted. [2025-09-23 19:57:45.953] RTNETLINK answers: File exists [2025-09-23 19:57:46.007] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:57:46.007] ubi2:dml_code is mounted. [2025-09-23 19:57:46.007] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:57:46.007] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:57:46.007] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:57:46.007] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:57:46.007] data.LB_FadeInType0=100 [2025-09-23 19:57:46.007] data.CHLH_FadeInType0=0 [2025-09-23 19:57:46.007] data.WU_FadeInDelay=0 [2025-09-23 19:57:46.007] max_time_out=0 [2025-09-23 19:57:46.007] No splash screen [2025-09-23 19:57:46.007] stop dss Done [2025-09-23 19:57:46.077] /dev/mem opened. [2025-09-23 19:57:46.077] Memory mapped at address 0xffffa0e98000. [2025-09-23 19:57:46.077] Read at address 0x00600018 (0xffffa0e98018): 0x00000000 [2025-09-23 19:57:46.077] Write at address 0x00600018 (0xffffa0e98018): 0x00400040, readback 0x00400040 [2025-09-23 19:57:46.093] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:57:46.109] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:57:46.221] Loaded PowerVR consumer services. [2025-09-23 19:57:46.364] Waiting data available... [2025-09-23 19:57:46.380] 512+0 records in [2025-09-23 19:57:46.380] 512+0 records out [2025-09-23 19:57:46.428] Starting syslogd/klogd: done [2025-09-23 19:57:46.444] DML Start [2025-09-23 19:57:46.621] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:57:46.860] DML res1: 0 [2025-09-23 19:57:47.271] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:57:47.271] Read Success [2025-09-23 19:57:47.271] Verifying certificate... [2025-09-23 19:57:47.575] Verified OK [2025-09-23 19:57:47.591] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:57:49.294] Verified OK [2025-09-23 19:57:49.294] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:57:49.875] Verified OK [2025-09-23 19:57:49.875] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:57:52.337] fs.protected_hardlinks = 1 [2025-09-23 19:57:52.337] fs.protected_symlinks = 1 [2025-09-23 19:57:52.353] kernel.modules_disabled = 1 [2025-09-23 19:57:52.545] [2025-09-23 19:57:52.545] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:57:53.855] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:58:01.580] SBL1:1210.0.1.0 [2025-09-23 19:58:01.629] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:58:03.196] SBL2:1210.0.1.0 [2025-09-23 19:58:03.244] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:58:03.339] j-A [2025-09-23 19:58:10.693] The R5 Autosar Classic is running [2025-09-23 19:58:10.718] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:58:10.718] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:58:11.326] INIT: version 2.96 booting [2025-09-23 19:58:11.438] INIT: Entering runlevel: 5 [2025-09-23 19:58:11.598] mtd24 attached [2025-09-23 19:58:11.598] mtd28 attached [2025-09-23 19:58:11.614] mtd32 attached [2025-09-23 19:58:11.729] RTNETLINK answers: File exists [2025-09-23 19:58:11.729] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:58:11.729] ubi1:animations is mounted. [2025-09-23 19:58:11.729] ubi2:dml_code is mounted. [2025-09-23 19:58:11.729] ubi0:textures is mounted. [2025-09-23 19:58:11.729] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:58:11.729] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:58:11.729] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:58:11.729] data.LB_FadeInType0=100 [2025-09-23 19:58:11.729] data.CHLH_FadeInType0=0 [2025-09-23 19:58:11.729] data.WU_FadeInDelay=0 [2025-09-23 19:58:11.729] max_time_out=0 [2025-09-23 19:58:11.729] No splash screen [2025-09-23 19:58:11.729] stop dss Done [2025-09-23 19:58:11.729] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:58:11.795] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:58:11.795] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:58:11.795] /dev/mem opened. [2025-09-23 19:58:11.795] Memory mapped at address 0xffffa52a4000. [2025-09-23 19:58:11.795] Read at address 0x00600018 (0xffffa52a4018): 0x00000000 [2025-09-23 19:58:11.795] Write at address 0x00600018 (0xffffa52a4018): 0x00400040, readback 0x00400040 [2025-09-23 19:58:11.970] Loaded PowerVR consumer services. [2025-09-23 19:58:12.099] Waiting data available... [2025-09-23 19:58:12.131] 512+0 records in [2025-09-23 19:58:12.131] 512+0 records out [2025-09-23 19:58:12.147] Starting syslogd/klogd: done [2025-09-23 19:58:12.163] DML Start [2025-09-23 19:58:12.370] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:58:12.626] DML res1: 0 [2025-09-23 19:58:12.953] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:58:12.953] Read Success [2025-09-23 19:58:12.953] Verifying certificate... [2025-09-23 19:58:13.177] Verified OK [2025-09-23 19:58:13.193] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:58:14.895] Verified OK [2025-09-23 19:58:14.895] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:58:15.504] Verified OK [2025-09-23 19:58:15.504] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:58:18.141] fs.protected_hardlinks = 1 [2025-09-23 19:58:18.158] fs.protected_symlinks = 1 [2025-09-23 19:58:18.158] kernel.modules_disabled = 1 [2025-09-23 19:58:18.366] [2025-09-23 19:58:18.366] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:58:19.667] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:58:27.309] SBL1:1210.0.1.0 [2025-09-23 19:58:27.357] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:58:28.923] SBL2:1210.0.1.0 [2025-09-23 19:58:28.971] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:58:29.083] j-A [2025-09-23 19:58:36.454] The R5 Autosar Classic is running [2025-09-23 19:58:36.454] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:58:36.454] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:58:37.062] INIT: version 2.96 booting [2025-09-23 19:58:37.173] INIT: Entering runlevel: 5 [2025-09-23 19:58:37.318] mtd24 attached [2025-09-23 19:58:37.334] mtd28 attached [2025-09-23 19:58:37.350] mtd32 attached [2025-09-23 19:58:37.398] ubi0:textures is mounted. [2025-09-23 19:58:37.398] RTNETLINK answers: File exists [2025-09-23 19:58:37.455] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:58:37.455] ubi1:animations is mounted. [2025-09-23 19:58:37.455] ubi2:dml_code is mounted. [2025-09-23 19:58:37.455] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:58:37.455] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:58:37.455] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:58:37.455] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:58:37.455] data.LB_FadeInType0=100 [2025-09-23 19:58:37.455] data.CHLH_FadeInType0=0 [2025-09-23 19:58:37.455] data.WU_FadeInDelay=0 [2025-09-23 19:58:37.455] max_time_out=0 [2025-09-23 19:58:37.455] No splash screen [2025-09-23 19:58:37.455] stop dss Done [2025-09-23 19:58:37.502] /dev/mem opened. [2025-09-23 19:58:37.502] Memory mapped at address 0xffffa8068000. [2025-09-23 19:58:37.528] Read at address 0x00600018 (0xffffa8068018): 0x00000000 [2025-09-23 19:58:37.528] Write at address 0x00600018 (0xffffa8068018): 0x00400040, readback 0x00400040 [2025-09-23 19:58:37.528] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:58:37.544] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:58:37.800] Waiting data available... [2025-09-23 19:58:37.816] Loaded PowerVR consumer services. [2025-09-23 19:58:37.848] 512+0 records in [2025-09-23 19:58:37.848] 512+0 records out [2025-09-23 19:58:37.880] Starting syslogd/klogd: done [2025-09-23 19:58:37.896] DML Start [2025-09-23 19:58:38.088] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:58:38.247] DML res1: 0 [2025-09-23 19:58:38.760] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:58:38.781] Read Success [2025-09-23 19:58:38.781] Verifying certificate... [2025-09-23 19:58:39.004] Verified OK [2025-09-23 19:58:39.020] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:58:40.628] Verified OK [2025-09-23 19:58:40.628] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:58:41.251] Verified OK [2025-09-23 19:58:41.251] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:58:43.825] fs.protected_hardlinks = 1 [2025-09-23 19:58:43.851] fs.protected_symlinks = 1 [2025-09-23 19:58:43.851] kernel.modules_disabled = 1 [2025-09-23 19:58:44.028] [2025-09-23 19:58:44.028] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:58:45.351] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:58:53.043] SBL1:1210.0.1.0 [2025-09-23 19:58:53.091] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:58:54.657] SBL2:1210.0.1.0 [2025-09-23 19:58:54.705] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:58:54.817] j-A [2025-09-23 19:59:02.156] The R5 Autosar Classic is running [2025-09-23 19:59:02.181] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:59:02.181] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:59:02.789] INIT: version 2.96 booting [2025-09-23 19:59:02.900] INIT: Entering runlevel: 5 [2025-09-23 19:59:03.060] mtd32 attached [2025-09-23 19:59:03.076] mtd28 attached [2025-09-23 19:59:03.076] mtd24 attached [2025-09-23 19:59:03.125] ubi0:dml_code is mounted. [2025-09-23 19:59:03.125] RTNETLINK answers: File exists [2025-09-23 19:59:03.169] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:59:03.169] ubi2:textures is mounted. [2025-09-23 19:59:03.169] ubi1:animations is mounted. [2025-09-23 19:59:03.169] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:59:03.169] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:59:03.169] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:59:03.169] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:59:03.195] data.LB_FadeInType0=100 [2025-09-23 19:59:03.195] data.CHLH_FadeInType0=0 [2025-09-23 19:59:03.195] data.WU_FadeInDelay=0 [2025-09-23 19:59:03.195] max_time_out=0 [2025-09-23 19:59:03.195] No splash screen [2025-09-23 19:59:03.195] stop dss Done [2025-09-23 19:59:03.211] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:59:03.211] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:59:03.243] /dev/mem opened. [2025-09-23 19:59:03.243] Memory mapped at address 0xffffa7992000. [2025-09-23 19:59:03.269] Read at address 0x00600018 (0xffffa7992018): 0x00000000 [2025-09-23 19:59:03.269] Write at address 0x00600018 (0xffffa7992018): 0x00400040, readback 0x00400040 [2025-09-23 19:59:03.538] Waiting data available... [2025-09-23 19:59:03.538] Loaded PowerVR consumer services. [2025-09-23 19:59:03.569] 512+0 records in [2025-09-23 19:59:03.585] 512+0 records out [2025-09-23 19:59:03.601] Starting syslogd/klogd: done [2025-09-23 19:59:03.617] DML Start [2025-09-23 19:59:03.794] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:59:04.001] DML res1: 0 [2025-09-23 19:59:04.465] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:59:04.486] Read Success [2025-09-23 19:59:04.486] Verifying certificate... [2025-09-23 19:59:04.694] Verified OK [2025-09-23 19:59:04.725] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:59:06.384] Verified OK [2025-09-23 19:59:06.384] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:59:06.912] Verified OK [2025-09-23 19:59:06.912] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:59:09.582] fs.protected_hardlinks = 1 [2025-09-23 19:59:09.598] fs.protected_symlinks = 1 [2025-09-23 19:59:09.598] kernel.modules_disabled = 1 [2025-09-23 19:59:09.790] [2025-09-23 19:59:09.790] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:59:11.034] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:59:18.789] SBL1:1210.0.1.0 [2025-09-23 19:59:18.836] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:59:20.403] SBL2:1210.0.1.0 [2025-09-23 19:59:20.451] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:59:20.546] j-A [2025-09-23 19:59:27.902] The R5 Autosar Classic is running [2025-09-23 19:59:27.925] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:59:27.925] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:59:28.534] INIT: version 2.96 booting [2025-09-23 19:59:28.646] INIT: Entering runlevel: 5 [2025-09-23 19:59:28.805] mtd24 attached [2025-09-23 19:59:28.805] mtd28 attached [2025-09-23 19:59:28.821] mtd32 attached [2025-09-23 19:59:28.853] ubi0:textures is mounted. [2025-09-23 19:59:28.869] RTNETLINK answers: File exists [2025-09-23 19:59:28.930] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:59:28.930] ubi2:dml_code is mounted. [2025-09-23 19:59:28.930] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:59:28.930] ubi1:animations is mounted. [2025-09-23 19:59:28.930] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:59:28.930] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:59:28.930] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:59:28.930] data.LB_FadeInType0=100 [2025-09-23 19:59:28.930] data.CHLH_FadeInType0=0 [2025-09-23 19:59:28.930] data.WU_FadeInDelay=0 [2025-09-23 19:59:28.930] max_time_out=0 [2025-09-23 19:59:28.930] No splash screen [2025-09-23 19:59:28.930] stop dss Done [2025-09-23 19:59:28.962] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:59:29.007] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:59:29.007] /dev/mem opened. [2025-09-23 19:59:29.007] Memory mapped at address 0xffff80429000. [2025-09-23 19:59:29.007] Read at address 0x00600018 (0xffff80429018): 0x00000000 [2025-09-23 19:59:29.007] Write at address 0x00600018 (0xffff80429018): 0x00400040, readback 0x00400040 [2025-09-23 19:59:29.167] Loaded PowerVR consumer services. [2025-09-23 19:59:29.295] Waiting data available... [2025-09-23 19:59:29.311] 512+0 records in [2025-09-23 19:59:29.311] 512+0 records out [2025-09-23 19:59:29.359] Starting syslogd/klogd: done [2025-09-23 19:59:29.375] DML Start [2025-09-23 19:59:29.551] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:59:29.791] DML res1: 0 [2025-09-23 19:59:30.189] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:59:30.189] Read Success [2025-09-23 19:59:30.189] Verifying certificate... [2025-09-23 19:59:30.413] Verified OK [2025-09-23 19:59:30.429] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:59:32.267] Verified OK [2025-09-23 19:59:32.267] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:59:32.806] Verified OK [2025-09-23 19:59:32.806] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 19:59:35.332] fs.protected_hardlinks = 1 [2025-09-23 19:59:35.332] fs.protected_symlinks = 1 [2025-09-23 19:59:35.348] kernel.modules_disabled = 1 [2025-09-23 19:59:35.541] [2025-09-23 19:59:35.541] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 19:59:36.817] RTNETLINK answers: Cannot assign requested address [2025-09-23 19:59:44.495] SBL1:1210.0.1.0 [2025-09-23 19:59:44.543] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 19:59:46.110] SBL2:1210.0.1.0 [2025-09-23 19:59:46.158] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 19:59:46.270] j-A [2025-09-23 19:59:53.609] The R5 Autosar Classic is running [2025-09-23 19:59:53.641] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 19:59:53.641] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 19:59:54.248] INIT: version 2.96 booting [2025-09-23 19:59:54.361] INIT: Entering runlevel: 5 [2025-09-23 19:59:54.505] mtd24 attached [2025-09-23 19:59:54.521] mtd32 attached [2025-09-23 19:59:54.537] mtd28 attached [2025-09-23 19:59:54.585] RTNETLINK answers: File exists [2025-09-23 19:59:54.645] ubi0:textures is mounted. [2025-09-23 19:59:54.645] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 19:59:54.645] ubi1:dml_code is mounted. [2025-09-23 19:59:54.645] ubi2:animations is mounted. [2025-09-23 19:59:54.645] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 19:59:54.645] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 19:59:54.645] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 19:59:54.645] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 19:59:54.645] data.LB_FadeInType0=100 [2025-09-23 19:59:54.645] data.CHLH_FadeInType0=0 [2025-09-23 19:59:54.645] data.WU_FadeInDelay=0 [2025-09-23 19:59:54.645] max_time_out=0 [2025-09-23 19:59:54.645] No splash screen [2025-09-23 19:59:54.645] stop dss Done [2025-09-23 19:59:54.731] /dev/mem opened. [2025-09-23 19:59:54.731] Memory mapped at address 0xffffb1f46000. [2025-09-23 19:59:54.731] Read at address 0x00600018 (0xffffb1f46018): 0x00000000 [2025-09-23 19:59:54.731] Write at address 0x00600018 (0xffffb1f46018): 0x00400040, readback 0x00400040 [2025-09-23 19:59:54.731] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 19:59:54.731] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 19:59:54.955] Loaded PowerVR consumer services. [2025-09-23 19:59:55.035] Waiting data available... [2025-09-23 19:59:55.066] 512+0 records in [2025-09-23 19:59:55.066] 512+0 records out [2025-09-23 19:59:55.098] Starting syslogd/klogd: done [2025-09-23 19:59:55.114] DML Start [2025-09-23 19:59:55.275] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 19:59:55.514] DML res1: 0 [2025-09-23 19:59:55.991] Read DML Algo certificate (mtd31) and save to file [2025-09-23 19:59:55.991] Read Success [2025-09-23 19:59:55.991] Verifying certificate... [2025-09-23 19:59:56.231] Verified OK [2025-09-23 19:59:56.279] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 19:59:57.981] Verified OK [2025-09-23 19:59:57.981] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 19:59:58.609] Verified OK [2025-09-23 19:59:58.609] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:00:01.182] fs.protected_hardlinks = 1 [2025-09-23 20:00:01.182] fs.protected_symlinks = 1 [2025-09-23 20:00:01.182] kernel.modules_disabled = 1 [2025-09-23 20:00:01.390] [2025-09-23 20:00:01.390] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:00:02.511] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:00:10.244] SBL1:1210.0.1.0 [2025-09-23 20:00:10.276] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:00:11.859] SBL2:1210.0.1.0 [2025-09-23 20:00:11.891] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:00:12.003] j-A [2025-09-23 20:00:19.379] The R5 Autosar Classic is running [2025-09-23 20:00:19.379] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:00:19.379] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:00:19.987] INIT: version 2.96 booting [2025-09-23 20:00:20.098] INIT: Entering runlevel: 5 [2025-09-23 20:00:20.242] mtd28 attached [2025-09-23 20:00:20.258] mtd24 attached [2025-09-23 20:00:20.274] mtd32 attached [2025-09-23 20:00:20.290] ubi0:animations is mounted. [2025-09-23 20:00:20.337] ubi1:textures is mounted. [2025-09-23 20:00:20.337] RTNETLINK answers: File exists [2025-09-23 20:00:20.337] ubi2:dml_code is mounted. [2025-09-23 20:00:20.337] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:00:20.386] data.LB_FadeInType0=100 [2025-09-23 20:00:20.386] data.CHLH_FadeInType0=0 [2025-09-23 20:00:20.386] data.WU_FadeInDelay=0 [2025-09-23 20:00:20.386] max_time_out=0 [2025-09-23 20:00:20.386] No splash screen [2025-09-23 20:00:20.386] stop dss Done [2025-09-23 20:00:20.386] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:00:20.386] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:00:20.386] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:00:20.386] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:00:20.402] /dev/mem opened. [2025-09-23 20:00:20.402] Memory mapped at address 0xffff98e99000. [2025-09-23 20:00:20.429] Read at address 0x00600018 (0xffff98e99018): 0x00000000 [2025-09-23 20:00:20.429] Write at address 0x00600018 (0xffff98e99018): 0x00400040, readback 0x00400040 [2025-09-23 20:00:20.477] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:00:20.477] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:00:20.749] Loaded PowerVR consumer services. [2025-09-23 20:00:20.780] Waiting data available... [2025-09-23 20:00:20.812] 512+0 records in [2025-09-23 20:00:20.812] 512+0 records out [2025-09-23 20:00:20.844] Starting syslogd/klogd: done [2025-09-23 20:00:20.860] DML Start [2025-09-23 20:00:21.036] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:00:21.275] DML res1: 0 [2025-09-23 20:00:21.643] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:00:21.659] Read Success [2025-09-23 20:00:21.659] Verifying certificate... [2025-09-23 20:00:21.947] Verified OK [2025-09-23 20:00:21.979] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:00:23.658] Verified OK [2025-09-23 20:00:23.658] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:00:24.231] Verified OK [2025-09-23 20:00:24.231] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:00:26.676] fs.protected_hardlinks = 1 [2025-09-23 20:00:26.692] fs.protected_symlinks = 1 [2025-09-23 20:00:26.692] kernel.modules_disabled = 1 [2025-09-23 20:00:26.885] [2025-09-23 20:00:26.885] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:00:28.307] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:00:30.555] SBL1:1210.0.1.0 [2025-09-23 20:00:36.023] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:00:37.590] SBL2:1210.0.1.0 [2025-09-23 20:00:37.638] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:00:37.735] j-A [2025-09-23 20:00:45.090] The R5 Autosar Classic is running [2025-09-23 20:00:45.112] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:00:45.112] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:00:45.721] INIT: version 2.96 booting [2025-09-23 20:00:45.833] INIT: Entering runlevel: 5 [2025-09-23 20:00:45.977] mtd28 attached [2025-09-23 20:00:45.993] mtd32 attached [2025-09-23 20:00:46.009] mtd24 attached [2025-09-23 20:00:46.056] RTNETLINK answers: File exists [2025-09-23 20:00:46.056] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:00:46.120] ubi0:animations is mounted. [2025-09-23 20:00:46.120] ubi1:dml_code is mounted. [2025-09-23 20:00:46.120] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:00:46.120] ubi2:textures is mounted. [2025-09-23 20:00:46.120] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:00:46.120] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:00:46.120] data.LB_FadeInType0=100 [2025-09-23 20:00:46.120] data.CHLH_FadeInType0=0 [2025-09-23 20:00:46.120] data.WU_FadeInDelay=0 [2025-09-23 20:00:46.120] max_time_out=0 [2025-09-23 20:00:46.120] No splash screen [2025-09-23 20:00:46.120] stop dss Done [2025-09-23 20:00:46.120] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:00:46.188] /dev/mem opened. [2025-09-23 20:00:46.188] Memory mapped at address 0xffffbc82a000. [2025-09-23 20:00:46.188] Read at address 0x00600018 (0xffffbc82a018): 0x00000000 [2025-09-23 20:00:46.188] Write at address 0x00600018 (0xffffbc82a018): 0x00400040, readback 0x00400040 [2025-09-23 20:00:46.220] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:00:46.236] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:00:46.443] Loaded PowerVR consumer services. [2025-09-23 20:00:46.475] Waiting data available... [2025-09-23 20:00:46.491] 512+0 records in [2025-09-23 20:00:46.491] 512+0 records out [2025-09-23 20:00:46.539] Starting syslogd/klogd: done [2025-09-23 20:00:46.555] DML Start [2025-09-23 20:00:46.715] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:00:46.939] DML res1: 0 [2025-09-23 20:00:47.473] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:00:47.473] Read Success [2025-09-23 20:00:47.473] Verifying certificate... [2025-09-23 20:00:47.825] Verified OK [2025-09-23 20:00:47.856] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:00:49.563] Verified OK [2025-09-23 20:00:49.563] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:00:50.057] Verified OK [2025-09-23 20:00:50.057] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:00:52.391] fs.protected_hardlinks = 1 [2025-09-23 20:00:52.406] fs.protected_symlinks = 1 [2025-09-23 20:00:52.406] kernel.modules_disabled = 1 [2025-09-23 20:00:52.598] [2025-09-23 20:00:52.598] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:00:53.999] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:01:01.712] SBL1:1210.0.1.0 [2025-09-23 20:01:01.744] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:01:03.327] SBL2:1210.0.1.0 [2025-09-23 20:01:03.375] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:01:03.470] j-A [2025-09-23 20:01:10.826] The R5 Autosar Classic is running [2025-09-23 20:01:10.849] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:01:10.849] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:01:11.457] INIT: version 2.96 booting [2025-09-23 20:01:11.569] INIT: Entering runlevel: 5 [2025-09-23 20:01:11.729] mtd28 attached [2025-09-23 20:01:11.745] mtd32 attached [2025-09-23 20:01:11.745] mtd24 attached [2025-09-23 20:01:11.793] RTNETLINK answers: File exists [2025-09-23 20:01:11.793] ubi0:animations is mounted. [2025-09-23 20:01:11.851] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:01:11.851] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:01:11.851] ubi1:dml_code is mounted. [2025-09-23 20:01:11.851] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:01:11.851] ubi2:textures is mounted. [2025-09-23 20:01:11.851] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:01:11.851] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:01:11.851] data.LB_FadeInType0=100 [2025-09-23 20:01:11.851] data.CHLH_FadeInType0=0 [2025-09-23 20:01:11.851] data.WU_FadeInDelay=0 [2025-09-23 20:01:11.851] max_time_out=0 [2025-09-23 20:01:11.851] No splash screen [2025-09-23 20:01:11.851] stop dss Done [2025-09-23 20:01:11.940] /dev/mem opened. [2025-09-23 20:01:11.940] Memory mapped at address 0xffff9e74d000. [2025-09-23 20:01:11.940] Read at address 0x00600018 (0xffff9e74d018): 0x00000000 [2025-09-23 20:01:11.940] Write at address 0x00600018 (0xffff9e74d018): 0x00400040, readback 0x00400040 [2025-09-23 20:01:11.940] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:01:11.956] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:01:12.196] Loaded PowerVR consumer services. [2025-09-23 20:01:12.212] Waiting data available... [2025-09-23 20:01:12.244] 512+0 records in [2025-09-23 20:01:12.244] 512+0 records out [2025-09-23 20:01:12.276] Starting syslogd/klogd: done [2025-09-23 20:01:12.292] DML Start [2025-09-23 20:01:12.452] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:01:12.708] DML res1: 0 [2025-09-23 20:01:13.084] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:01:13.084] Read Success [2025-09-23 20:01:13.084] Verifying certificate... [2025-09-23 20:01:13.372] Verified OK [2025-09-23 20:01:13.388] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:01:15.204] Verified OK [2025-09-23 20:01:15.204] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:01:15.683] Verified OK [2025-09-23 20:01:15.683] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:01:18.145] fs.protected_hardlinks = 1 [2025-09-23 20:01:18.145] fs.protected_symlinks = 1 [2025-09-23 20:01:18.161] kernel.modules_disabled = 1 [2025-09-23 20:01:18.353] [2025-09-23 20:01:18.353] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:01:19.760] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:01:27.439] SBL1:1210.0.1.0 [2025-09-23 20:01:27.486] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:01:29.053] SBL2:1210.0.1.0 [2025-09-23 20:01:29.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:01:29.214] j-A [2025-09-23 20:01:36.585] The R5 Autosar Classic is running [2025-09-23 20:01:36.585] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:01:36.585] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:01:37.192] INIT: version 2.96 booting [2025-09-23 20:01:37.304] INIT: Entering runlevel: 5 [2025-09-23 20:01:37.448] mtd24 attached [2025-09-23 20:01:37.464] mtd32 attached [2025-09-23 20:01:37.480] mtd28 attached [2025-09-23 20:01:37.562] RTNETLINK answers: File exists [2025-09-23 20:01:37.562] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:01:37.562] ubi0:textures is mounted. [2025-09-23 20:01:37.562] ubi1:dml_code is mounted. [2025-09-23 20:01:37.562] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:01:37.562] ubi2:animations is mounted. [2025-09-23 20:01:37.562] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:01:37.562] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:01:37.562] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:01:37.587] data.LB_FadeInType0=100 [2025-09-23 20:01:37.587] data.CHLH_FadeInType0=0 [2025-09-23 20:01:37.587] data.WU_FadeInDelay=0 [2025-09-23 20:01:37.587] max_time_out=0 [2025-09-23 20:01:37.587] No splash screen [2025-09-23 20:01:37.587] stop dss Done [2025-09-23 20:01:37.619] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:01:37.635] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:01:37.635] /dev/mem opened. [2025-09-23 20:01:37.667] Memory mapped at address 0xffffbbff8000. [2025-09-23 20:01:37.667] Read at address 0x00600018 (0xffffbbff8018): 0x00000000 [2025-09-23 20:01:37.667] Write at address 0x00600018 (0xffffbbff8018): 0x00400040, readback 0x00400040 [2025-09-23 20:01:37.795] Loaded PowerVR consumer services. [2025-09-23 20:01:37.938] Waiting data available... [2025-09-23 20:01:37.970] 512+0 records in [2025-09-23 20:01:37.970] 512+0 records out [2025-09-23 20:01:38.002] Starting syslogd/klogd: done [2025-09-23 20:01:38.018] DML Start [2025-09-23 20:01:38.210] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:01:38.450] DML res1: 0 [2025-09-23 20:01:38.832] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:01:38.832] Read Success [2025-09-23 20:01:38.832] Verifying certificate... [2025-09-23 20:01:39.055] Verified OK [2025-09-23 20:01:39.072] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:01:40.830] Verified OK [2025-09-23 20:01:40.830] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:01:41.379] Verified OK [2025-09-23 20:01:41.379] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:01:43.858] fs.protected_hardlinks = 1 [2025-09-23 20:01:43.874] fs.protected_symlinks = 1 [2025-09-23 20:01:43.874] kernel.modules_disabled = 1 [2025-09-23 20:01:44.065] [2025-09-23 20:01:44.065] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:01:45.492] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:01:53.197] SBL1:1210.0.1.0 [2025-09-23 20:01:53.229] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:01:54.811] SBL2:1210.0.1.0 [2025-09-23 20:01:54.843] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 20:01:54.956] j-A [2025-09-23 20:02:02.310] The R5 Autosar Classic is running [2025-09-23 20:02:02.310] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:02:02.330] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:02:02.938] INIT: version 2.96 booting [2025-09-23 20:02:03.051] INIT: Entering runlevel: 5 [2025-09-23 20:02:03.210] mtd24 attached [2025-09-23 20:02:03.210] mtd28 attached [2025-09-23 20:02:03.226] mtd32 attached [2025-09-23 20:02:03.258] ubi0:textures is mounted. [2025-09-23 20:02:03.290] RTNETLINK answers: File exists [2025-09-23 20:02:03.290] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:02:03.342] ubi2:dml_code is mounted. [2025-09-23 20:02:03.342] ubi1:animations is mounted. [2025-09-23 20:02:03.342] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:02:03.342] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:02:03.342] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:02:03.342] data.LB_FadeInType0=100 [2025-09-23 20:02:03.342] data.CHLH_FadeInType0=0 [2025-09-23 20:02:03.342] data.WU_FadeInDelay=0 [2025-09-23 20:02:03.342] max_time_out=0 [2025-09-23 20:02:03.342] No splash screen [2025-09-23 20:02:03.342] stop dss Done [2025-09-23 20:02:03.342] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:02:03.421] /dev/mem opened. [2025-09-23 20:02:03.421] Memory mapped at address 0xffffa1f63000. [2025-09-23 20:02:03.421] Read at address 0x00600018 (0xffffa1f63018): 0x00000000 [2025-09-23 20:02:03.421] Write at address 0x00600018 (0xffffa1f63018): 0x00400040, readback 0x00400040 [2025-09-23 20:02:03.421] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:02:03.421] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:02:03.533] Loaded PowerVR consumer services. [2025-09-23 20:02:03.677] Waiting data available... [2025-09-23 20:02:03.709] 512+0 records in [2025-09-23 20:02:03.709] 512+0 records out [2025-09-23 20:02:03.757] Starting syslogd/klogd: done [2025-09-23 20:02:03.773] DML Start [2025-09-23 20:02:03.933] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:02:04.173] DML res1: 0 [2025-09-23 20:02:04.618] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:02:04.618] Read Success [2025-09-23 20:02:04.618] Verifying certificate... [2025-09-23 20:02:04.842] Verified OK [2025-09-23 20:02:04.858] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:02:06.533] Verified OK [2025-09-23 20:02:06.533] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:02:07.083] Verified OK [2025-09-23 20:02:07.083] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:02:09.706] fs.protected_hardlinks = 1 [2025-09-23 20:02:09.722] fs.protected_symlinks = 1 [2025-09-23 20:02:09.722] kernel.modules_disabled = 1 [2025-09-23 20:02:09.914] [2025-09-23 20:02:09.914] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:02:11.193] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:02:18.928] SBL1:1210.0.1.0 [2025-09-23 20:02:18.976] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:02:20.542] SBL2:1210.0.1.0 [2025-09-23 20:02:20.590] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:02:20.702] j-A [2025-09-23 20:02:28.073] The R5 Autosar Classic is running [2025-09-23 20:02:28.073] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:02:28.073] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:02:28.680] INIT: version 2.96 booting [2025-09-23 20:02:28.793] INIT: Entering runlevel: 5 [2025-09-23 20:02:28.936] mtd24 attached [2025-09-23 20:02:28.952] mtd28 attached [2025-09-23 20:02:28.968] mtd32 attached [2025-09-23 20:02:29.065] ubi0:textures is mounted. [2025-09-23 20:02:29.065] ubi1:animations is mounted. [2025-09-23 20:02:29.065] RTNETLINK answers: File exists [2025-09-23 20:02:29.065] ubi2:dml_code is mounted. [2025-09-23 20:02:29.065] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:02:29.065] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:02:29.065] data.LB_FadeInType0=100 [2025-09-23 20:02:29.065] data.CHLH_FadeInType0=0 [2025-09-23 20:02:29.065] data.WU_FadeInDelay=0 [2025-09-23 20:02:29.065] max_time_out=0 [2025-09-23 20:02:29.065] No splash screen [2025-09-23 20:02:29.065] stop dss Done [2025-09-23 20:02:29.065] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:02:29.065] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:02:29.093] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:02:29.133] /dev/mem opened. [2025-09-23 20:02:29.133] Memory mapped at address 0xffff9fbb5000. [2025-09-23 20:02:29.133] Read at address 0x00600018 (0xffff9fbb5018): 0x00000000 [2025-09-23 20:02:29.133] Write at address 0x00600018 (0xffff9fbb5018): 0x00400040, readback 0x00400040 [2025-09-23 20:02:29.164] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:02:29.196] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:02:29.244] Loaded PowerVR consumer services. [2025-09-23 20:02:29.421] Waiting data available... [2025-09-23 20:02:29.453] 512+0 records in [2025-09-23 20:02:29.453] 512+0 records out [2025-09-23 20:02:29.500] Starting syslogd/klogd: done [2025-09-23 20:02:29.516] DML Start [2025-09-23 20:02:29.676] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:02:29.852] DML res1: 0 [2025-09-23 20:02:30.442] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:02:30.442] Read Success [2025-09-23 20:02:30.442] Verifying certificate... [2025-09-23 20:02:30.665] Verified OK [2025-09-23 20:02:30.697] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:02:32.312] Verified OK [2025-09-23 20:02:32.312] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:02:32.909] Verified OK [2025-09-23 20:02:32.909] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:02:35.404] fs.protected_hardlinks = 1 [2025-09-23 20:02:35.420] fs.protected_symlinks = 1 [2025-09-23 20:02:35.420] kernel.modules_disabled = 1 [2025-09-23 20:02:35.628] [2025-09-23 20:02:35.628] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:02:36.955] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:02:44.648] SBL1:1210.0.1.0 [2025-09-23 20:02:44.696] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:02:46.263] SBL2:1210.0.1.0 [2025-09-23 20:02:46.311] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:02:46.407] j-A [2025-09-23 20:02:53.761] The R5 Autosar Classic is running [2025-09-23 20:02:53.786] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:02:53.786] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:02:54.394] INIT: version 2.96 booting [2025-09-23 20:02:54.506] INIT: Entering runlevel: 5 [2025-09-23 20:02:54.666] mtd28 attached [2025-09-23 20:02:54.666] mtd32 attached [2025-09-23 20:02:54.681] mtd24 attached [2025-09-23 20:02:54.729] ubi0:animations is mounted. [2025-09-23 20:02:54.729] RTNETLINK answers: File exists [2025-09-23 20:02:54.790] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:02:54.790] ubi1:dml_code is mounted. [2025-09-23 20:02:54.790] ubi2:textures is mounted. [2025-09-23 20:02:54.790] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:02:54.790] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:02:54.790] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:02:54.790] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:02:54.790] data.LB_FadeInType0=100 [2025-09-23 20:02:54.790] data.CHLH_FadeInType0=0 [2025-09-23 20:02:54.790] data.WU_FadeInDelay=0 [2025-09-23 20:02:54.790] max_time_out=0 [2025-09-23 20:02:54.790] No splash screen [2025-09-23 20:02:54.790] stop dss Done [2025-09-23 20:02:54.822] /dev/mem opened. [2025-09-23 20:02:54.822] Memory mapped at address 0xffff8bb6e000. [2025-09-23 20:02:54.860] Read at address 0x00600018 (0xffff8bb6e018): 0x00000000 [2025-09-23 20:02:54.860] Write at address 0x00600018 (0xffff8bb6e018): 0x00400040, readback 0x00400040 [2025-09-23 20:02:54.860] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:02:54.876] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:02:55.004] Loaded PowerVR consumer services. [2025-09-23 20:02:55.148] Waiting data available... [2025-09-23 20:02:55.180] 512+0 records in [2025-09-23 20:02:55.180] 512+0 records out [2025-09-23 20:02:55.196] Starting syslogd/klogd: done [2025-09-23 20:02:55.228] DML Start [2025-09-23 20:02:55.420] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:02:55.676] DML res1: 0 [2025-09-23 20:02:56.051] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:02:56.051] Read Success [2025-09-23 20:02:56.051] Verifying certificate... [2025-09-23 20:02:56.355] Verified OK [2025-09-23 20:02:56.387] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:02:57.906] Verified OK [2025-09-23 20:02:57.906] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:02:58.555] Verified OK [2025-09-23 20:02:58.555] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:03:01.305] fs.protected_hardlinks = 1 [2025-09-23 20:03:01.321] fs.protected_symlinks = 1 [2025-09-23 20:03:01.321] kernel.modules_disabled = 1 [2025-09-23 20:03:01.528] [2025-09-23 20:03:01.528] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:03:02.664] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:03:10.381] SBL1:1210.0.1.0 [2025-09-23 20:03:10.429] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:03:11.996] SBL2:1210.0.1.0 [2025-09-23 20:03:12.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:03:12.156] j-A [2025-09-23 20:03:19.529] The R5 Autosar Classic is running [2025-09-23 20:03:19.529] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:03:19.529] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:03:20.137] INIT: version 2.96 booting [2025-09-23 20:03:20.249] INIT: Entering runlevel: 5 [2025-09-23 20:03:20.409] mtd28 attached [2025-09-23 20:03:20.425] mtd32 attached [2025-09-23 20:03:20.425] mtd24 attached [2025-09-23 20:03:20.473] RTNETLINK answers: File exists [2025-09-23 20:03:20.473] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:03:20.515] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:03:20.515] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:03:20.515] ubi1:dml_code is mounted. [2025-09-23 20:03:20.515] ubi0:animations is mounted. [2025-09-23 20:03:20.515] ubi2:textures is mounted. [2025-09-23 20:03:20.515] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:03:20.515] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:03:20.541] data.LB_FadeInType0=100 [2025-09-23 20:03:20.541] data.CHLH_FadeInType0=0 [2025-09-23 20:03:20.541] data.WU_FadeInDelay=0 [2025-09-23 20:03:20.541] max_time_out=0 [2025-09-23 20:03:20.541] No splash screen [2025-09-23 20:03:20.541] stop dss Done [2025-09-23 20:03:20.557] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:03:20.583] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:03:20.618] /dev/mem opened. [2025-09-23 20:03:20.618] Memory mapped at address 0xffff99a37000. [2025-09-23 20:03:20.618] Read at address 0x00600018 (0xffff99a37018): 0x00000000 [2025-09-23 20:03:20.618] Write at address 0x00600018 (0xffff99a37018): 0x00400040, readback 0x00400040 [2025-09-23 20:03:20.904] Loaded PowerVR consumer services. [2025-09-23 20:03:20.904] Waiting data available... [2025-09-23 20:03:20.936] 512+0 records in [2025-09-23 20:03:20.936] 512+0 records out [2025-09-23 20:03:20.968] Starting syslogd/klogd: done [2025-09-23 20:03:20.984] DML Start [2025-09-23 20:03:21.176] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:03:21.431] DML res1: 0 [2025-09-23 20:03:21.831] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:03:21.852] Read Success [2025-09-23 20:03:21.852] Verifying certificate... [2025-09-23 20:03:22.139] Verified OK [2025-09-23 20:03:22.171] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:03:23.770] Verified OK [2025-09-23 20:03:23.770] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:03:24.420] Verified OK [2025-09-23 20:03:24.420] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:03:26.882] fs.protected_hardlinks = 1 [2025-09-23 20:03:26.898] fs.protected_symlinks = 1 [2025-09-23 20:03:26.898] kernel.modules_disabled = 1 [2025-09-23 20:03:27.105] [2025-09-23 20:03:27.105] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:03:28.473] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:03:36.121] SBL1:1210.0.1.0 [2025-09-23 20:03:36.169] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:03:37.736] SBL2:1210.0.1.0 [2025-09-23 20:03:37.784] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:03:37.896] j-A [2025-09-23 20:03:45.234] The R5 Autosar Classic is running [2025-09-23 20:03:45.265] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:03:45.265] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:03:45.873] INIT: version 2.96 booting [2025-09-23 20:03:45.968] INIT: Entering runlevel: 5 [2025-09-23 20:03:46.129] mtd24 attached [2025-09-23 20:03:46.129] mtd28 attached [2025-09-23 20:03:46.161] mtd32 attached [2025-09-23 20:03:46.177] ubi0:textures is mounted. [2025-09-23 20:03:46.193] RTNETLINK answers: File exists [2025-09-23 20:03:46.258] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:03:46.258] ubi1:animations is mounted. [2025-09-23 20:03:46.258] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:03:46.258] ubi2:dml_code is mounted. [2025-09-23 20:03:46.258] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:03:46.258] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:03:46.258] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:03:46.258] data.LB_FadeInType0=100 [2025-09-23 20:03:46.258] data.CHLH_FadeInType0=0 [2025-09-23 20:03:46.258] data.WU_FadeInDelay=0 [2025-09-23 20:03:46.258] max_time_out=0 [2025-09-23 20:03:46.258] No splash screen [2025-09-23 20:03:46.258] stop dss Done [2025-09-23 20:03:46.289] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:03:46.325] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:03:46.325] /dev/mem opened. [2025-09-23 20:03:46.325] Memory mapped at address 0xffff9ff33000. [2025-09-23 20:03:46.325] Read at address 0x00600018 (0xffff9ff33018): 0x00000000 [2025-09-23 20:03:46.325] Write at address 0x00600018 (0xffff9ff33018): 0x00400040, readback 0x00400040 [2025-09-23 20:03:46.609] Loaded PowerVR consumer services. [2025-09-23 20:03:46.609] Waiting data available... [2025-09-23 20:03:46.641] 512+0 records in [2025-09-23 20:03:46.641] 512+0 records out [2025-09-23 20:03:46.673] Starting syslogd/klogd: done [2025-09-23 20:03:46.689] DML Start [2025-09-23 20:03:46.865] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:03:47.120] DML res1: 0 [2025-09-23 20:03:47.542] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:03:47.542] Read Success [2025-09-23 20:03:47.542] Verifying certificate... [2025-09-23 20:03:47.766] Verified OK [2025-09-23 20:03:47.797] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:03:49.428] Verified OK [2025-09-23 20:03:49.428] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:03:50.108] Verified OK [2025-09-23 20:03:50.108] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:03:50.811] 5469 GC [0] [2025-09-23 20:03:50.875] 5530 GC [1] [2025-09-23 20:03:50.954] 5608 GC [2] [2025-09-23 20:03:51.018] 5676 GC [3] [2025-09-23 20:03:51.099] 5747 GC [4] [2025-09-23 20:03:51.162] 5810 GC [5] [2025-09-23 20:03:51.226] 5878 GC [6] [2025-09-23 20:03:51.291] 5949 GC [7] [2025-09-23 20:03:51.371] 6027 GC [8] [2025-09-23 20:03:51.434] 6090 GC [9] [2025-09-23 20:03:51.498] 6157 GC [10] [2025-09-23 20:03:51.562] 6219 GC [11] [2025-09-23 20:03:51.643] 6289 GC [12] [2025-09-23 20:03:51.690] 6346 GC [13] [2025-09-23 20:03:51.754] 6397 GC [14] [2025-09-23 20:03:51.802] 6459 GC [15] [2025-09-23 20:03:51.866] 6517 GC [16] [2025-09-23 20:03:51.930] 6589 GC [17] [2025-09-23 20:03:51.993] 6646 GC [18] [2025-09-23 20:03:52.058] 6708 GC [19] [2025-09-23 20:03:52.122] 6770 GC [20] [2025-09-23 20:03:52.170] 6826 GC [21] [2025-09-23 20:03:52.234] 6888 GC [22] [2025-09-23 20:03:52.298] 6950 GC [23] [2025-09-23 20:03:52.346] 7007 GC [24] [2025-09-23 20:03:52.425] 7076 GC [25] [2025-09-23 20:03:52.489] 7137 GC [26] [2025-09-23 20:03:52.537] 7195 GC [27] [2025-09-23 20:03:52.602] fs.protected_hardlinks = 1 [2025-09-23 20:03:52.602] 7256 GC [28] [2025-09-23 20:03:52.618] fs.protected_symlinks = 1 [2025-09-23 20:03:52.634] kernel.modules_disabled = 1 [2025-09-23 20:03:52.681] 7330 GC [29] [2025-09-23 20:03:52.697] GC DONE [2025-09-23 20:03:52.841] [2025-09-23 20:03:52.841] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:03:54.093] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:04:01.883] SBL1:1210.0.1.0 [2025-09-23 20:04:01.915] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:04:03.498] SBL2:1210.0.1.0 [2025-09-23 20:04:03.530] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:04:03.642] j-A [2025-09-23 20:04:10.982] The R5 Autosar Classic is running [2025-09-23 20:04:11.007] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:04:11.007] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:04:11.614] INIT: version 2.96 booting [2025-09-23 20:04:11.726] INIT: Entering runlevel: 5 [2025-09-23 20:04:11.886] mtd28 attached [2025-09-23 20:04:11.886] mtd24 attached [2025-09-23 20:04:11.902] mtd32 attached [2025-09-23 20:04:11.950] ubi0:animations is mounted. [2025-09-23 20:04:11.950] RTNETLINK answers: File exists [2025-09-23 20:04:11.966] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:04:11.966] ubi1:textures is mounted. [2025-09-23 20:04:12.010] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:04:12.010] ubi2:dml_code is mounted. [2025-09-23 20:04:12.010] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:04:12.010] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:04:12.010] data.LB_FadeInType0=100 [2025-09-23 20:04:12.010] data.CHLH_FadeInType0=0 [2025-09-23 20:04:12.010] data.WU_FadeInDelay=0 [2025-09-23 20:04:12.010] max_time_out=0 [2025-09-23 20:04:12.010] No splash screen [2025-09-23 20:04:12.010] stop dss Done [2025-09-23 20:04:12.010] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:04:12.058] /dev/mem opened. [2025-09-23 20:04:12.058] Memory mapped at address 0xffff95598000. [2025-09-23 20:04:12.084] Read at address 0x00600018 (0xffff95598018): 0x00000000 [2025-09-23 20:04:12.084] Write at address 0x00600018 (0xffff95598018): 0x00400040, readback 0x00400040 [2025-09-23 20:04:12.116] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:04:12.132] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:04:12.229] Loaded PowerVR consumer services. [2025-09-23 20:04:12.324] 512+0 records in [2025-09-23 20:04:12.324] 512+0 records out [2025-09-23 20:04:12.340] Waiting data available... [2025-09-23 20:04:12.356] Starting syslogd/klogd: done [2025-09-23 20:04:12.372] DML Start [2025-09-23 20:04:12.581] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:04:12.820] DML res1: 0 [2025-09-23 20:04:13.209] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:04:13.209] Read Success [2025-09-23 20:04:13.209] Verifying certificate... [2025-09-23 20:04:13.449] Verified OK [2025-09-23 20:04:13.449] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:04:15.103] Verified OK [2025-09-23 20:04:15.103] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:04:15.743] Verified OK [2025-09-23 20:04:15.743] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:04:18.413] fs.protected_hardlinks = 1 [2025-09-23 20:04:18.429] fs.protected_symlinks = 1 [2025-09-23 20:04:18.429] kernel.modules_disabled = 1 [2025-09-23 20:04:18.637] [2025-09-23 20:04:18.637] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:04:19.884] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:04:27.622] SBL1:1210.0.1.0 [2025-09-23 20:04:27.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:04:29.236] SBL2:1210.0.1.0 [2025-09-23 20:04:29.268] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:04:29.380] j-A [2025-09-23 20:04:36.720] The R5 Autosar Classic is running [2025-09-23 20:04:36.745] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:04:36.745] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:04:37.353] INIT: version 2.96 booting [2025-09-23 20:04:37.465] INIT: Entering runlevel: 5 [2025-09-23 20:04:37.625] mtd24 attached [2025-09-23 20:04:37.640] mtd32 attached [2025-09-23 20:04:37.640] mtd28 attached [2025-09-23 20:04:37.656] ubi0:textures is mounted. [2025-09-23 20:04:37.688] ubi1:dml_code is mounted. [2025-09-23 20:04:37.752] RTNETLINK answers: File exists [2025-09-23 20:04:37.752] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:04:37.752] ubi2:animations is mounted. [2025-09-23 20:04:37.752] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:04:37.752] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:04:37.752] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:04:37.752] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:04:37.752] data.LB_FadeInType0=100 [2025-09-23 20:04:37.752] data.CHLH_FadeInType0=0 [2025-09-23 20:04:37.752] data.WU_FadeInDelay=0 [2025-09-23 20:04:37.752] max_time_out=0 [2025-09-23 20:04:37.752] No splash screen [2025-09-23 20:04:37.752] stop dss Done [2025-09-23 20:04:37.824] /dev/mem opened. [2025-09-23 20:04:37.824] Memory mapped at address 0xffffba646000. [2025-09-23 20:04:37.824] Read at address 0x00600018 (0xffffba646018): 0x00000000 [2025-09-23 20:04:37.824] Write at address 0x00600018 (0xffffba646018): 0x00400040, readback 0x00400040 [2025-09-23 20:04:37.824] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:04:37.824] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:04:37.952] Loaded PowerVR consumer services. [2025-09-23 20:04:38.047] Waiting data available... [2025-09-23 20:04:38.063] 512+0 records in [2025-09-23 20:04:38.063] 512+0 records out [2025-09-23 20:04:38.079] Starting syslogd/klogd: done [2025-09-23 20:04:38.095] DML Start [2025-09-23 20:04:38.255] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:04:38.527] DML res1: 0 [2025-09-23 20:04:38.968] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:04:38.968] Read Success [2025-09-23 20:04:38.968] Verifying certificate... [2025-09-23 20:04:39.208] Verified OK [2025-09-23 20:04:39.224] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:04:40.870] Verified OK [2025-09-23 20:04:40.891] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:04:41.545] Verified OK [2025-09-23 20:04:41.545] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:04:44.246] fs.protected_hardlinks = 1 [2025-09-23 20:04:44.262] fs.protected_symlinks = 1 [2025-09-23 20:04:44.262] kernel.modules_disabled = 1 [2025-09-23 20:04:44.454] [2025-09-23 20:04:44.454] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:04:45.618] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:04:53.349] SBL1:1210.0.1.0 [2025-09-23 20:04:53.397] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:04:54.963] SBL2:1210.0.1.0 [2025-09-23 20:04:54.995] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:04:55.108] j-A [2025-09-23 20:05:02.448] The R5 Autosar Classic is running [2025-09-23 20:05:02.479] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:05:02.479] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:05:03.087] INIT: version 2.96 booting [2025-09-23 20:05:03.198] INIT: Entering runlevel: 5 [2025-09-23 20:05:03.343] mtd24 attached [2025-09-23 20:05:03.359] mtd28 attached [2025-09-23 20:05:03.375] mtd32 attached [2025-09-23 20:05:03.391] ubi0:textures is mounted. [2025-09-23 20:05:03.448] ubi1:animations is mounted. [2025-09-23 20:05:03.448] RTNETLINK answers: File exists [2025-09-23 20:05:03.448] ubi2:dml_code is mounted. [2025-09-23 20:05:03.448] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:05:03.448] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:05:03.448] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:05:03.480] data.LB_FadeInType0=100 [2025-09-23 20:05:03.480] data.CHLH_FadeInType0=0 [2025-09-23 20:05:03.480] data.WU_FadeInDelay=0 [2025-09-23 20:05:03.480] max_time_out=0 [2025-09-23 20:05:03.480] No splash screen [2025-09-23 20:05:03.480] stop dss Done [2025-09-23 20:05:03.480] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:05:03.480] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:05:03.553] /dev/mem opened. [2025-09-23 20:05:03.553] Memory mapped at address 0xffffae26f000. [2025-09-23 20:05:03.553] Read at address 0x00600018 (0xffffae26f018): 0x00000000 [2025-09-23 20:05:03.553] Write at address 0x00600018 (0xffffae26f018): 0x00400040, readback 0x00400040 [2025-09-23 20:05:03.569] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:05:03.569] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:05:03.665] Loaded PowerVR consumer services. [2025-09-23 20:05:03.777] 512+0 records in [2025-09-23 20:05:03.777] 512+0 records out [2025-09-23 20:05:03.793] Waiting data available... [2025-09-23 20:05:03.825] Starting syslogd/klogd: done [2025-09-23 20:05:03.841] DML Start [2025-09-23 20:05:04.033] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:05:04.273] DML res1: 0 [2025-09-23 20:05:04.709] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:05:04.709] Read Success [2025-09-23 20:05:04.709] Verifying certificate... [2025-09-23 20:05:04.982] Verified OK [2025-09-23 20:05:04.998] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:05:06.641] Verified OK [2025-09-23 20:05:06.641] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:05:07.254] Verified OK [2025-09-23 20:05:07.254] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:05:09.780] fs.protected_hardlinks = 1 [2025-09-23 20:05:09.780] fs.protected_symlinks = 1 [2025-09-23 20:05:09.796] kernel.modules_disabled = 1 [2025-09-23 20:05:09.988] [2025-09-23 20:05:09.988] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:05:11.368] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:05:19.088] SBL1:1210.0.1.0 [2025-09-23 20:05:19.136] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:05:20.703] SBL2:1210.0.1.0 [2025-09-23 20:05:20.735] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:05:20.847] j-A [2025-09-23 20:05:28.218] The R5 Autosar Classic is running [2025-09-23 20:05:28.218] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:05:28.218] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:05:28.825] INIT: version 2.96 booting [2025-09-23 20:05:28.921] INIT: Entering runlevel: 5 [2025-09-23 20:05:29.081] mtd24 attached [2025-09-23 20:05:29.097] mtd28 attached [2025-09-23 20:05:29.113] mtd32 attached [2025-09-23 20:05:29.145] ubi0:textures is mounted. [2025-09-23 20:05:29.194] ubi1:animations is mounted. [2025-09-23 20:05:29.194] RTNETLINK answers: File exists [2025-09-23 20:05:29.194] ubi2:dml_code is mounted. [2025-09-23 20:05:29.194] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:05:29.194] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:05:29.194] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:05:29.194] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:05:29.194] data.LB_FadeInType0=100 [2025-09-23 20:05:29.221] data.CHLH_FadeInType0=0 [2025-09-23 20:05:29.221] data.WU_FadeInDelay=0 [2025-09-23 20:05:29.221] max_time_out=0 [2025-09-23 20:05:29.221] No splash screen [2025-09-23 20:05:29.221] stop dss Done [2025-09-23 20:05:29.221] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:05:29.253] /dev/mem opened. [2025-09-23 20:05:29.284] Memory mapped at address 0xffffa9330000. [2025-09-23 20:05:29.284] Read at address 0x00600018 (0xffffa9330018): 0x00000000 [2025-09-23 20:05:29.284] Write at address 0x00600018 (0xffffa9330018): 0x00400040, readback 0x00400040 [2025-09-23 20:05:29.316] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:05:29.332] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:05:29.429] Loaded PowerVR consumer services. [2025-09-23 20:05:29.508] 512+0 records in [2025-09-23 20:05:29.508] 512+0 records out [2025-09-23 20:05:29.524] Waiting data available... [2025-09-23 20:05:29.557] Starting syslogd/klogd: done [2025-09-23 20:05:29.573] DML Start [2025-09-23 20:05:29.748] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:05:29.957] DML res1: 0 [2025-09-23 20:05:30.451] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:05:30.451] Read Success [2025-09-23 20:05:30.451] Verifying certificate... [2025-09-23 20:05:30.674] Verified OK [2025-09-23 20:05:30.690] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:05:32.434] Verified OK [2025-09-23 20:05:32.434] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:05:33.037] Verified OK [2025-09-23 20:05:33.037] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:05:35.563] fs.protected_hardlinks = 1 [2025-09-23 20:05:35.579] fs.protected_symlinks = 1 [2025-09-23 20:05:35.579] kernel.modules_disabled = 1 [2025-09-23 20:05:35.771] [2025-09-23 20:05:35.771] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:05:37.064] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:05:44.823] SBL1:1210.0.1.0 [2025-09-23 20:05:44.870] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:05:46.437] SBL2:1210.0.1.0 [2025-09-23 20:05:46.485] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 20:05:46.581] j-A [2025-09-23 20:05:53.936] The R5 Autosar Classic is running [2025-09-23 20:05:53.936] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:05:53.957] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:05:54.564] INIT: version 2.96 booting [2025-09-23 20:05:54.677] INIT: Entering runlevel: 5 [2025-09-23 20:05:54.836] mtd24 attached [2025-09-23 20:05:54.836] mtd32 attached [2025-09-23 20:05:54.852] mtd28 attached [2025-09-23 20:05:54.900] ubi0:textures is mounted. [2025-09-23 20:05:54.900] RTNETLINK answers: File exists [2025-09-23 20:05:54.916] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:05:54.916] ubi2:animations is mounted. [2025-09-23 20:05:54.949] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:05:54.949] ubi1:dml_code is mounted. [2025-09-23 20:05:54.949] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:05:54.949] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:05:54.949] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:05:54.973] data.LB_FadeInType0=100 [2025-09-23 20:05:54.973] data.CHLH_FadeInType0=0 [2025-09-23 20:05:54.973] data.WU_FadeInDelay=0 [2025-09-23 20:05:54.973] max_time_out=0 [2025-09-23 20:05:54.973] No splash screen [2025-09-23 20:05:54.973] stop dss Done [2025-09-23 20:05:55.005] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:05:55.021] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:05:55.053] /dev/mem opened. [2025-09-23 20:05:55.053] Memory mapped at address 0xffffb5d5a000. [2025-09-23 20:05:55.053] Read at address 0x00600018 (0xffffb5d5a018): 0x00000000 [2025-09-23 20:05:55.053] Write at address 0x00600018 (0xffffb5d5a018): 0x00400040, readback 0x00400040 [2025-09-23 20:05:55.197] Loaded PowerVR consumer services. [2025-09-23 20:05:55.229] 512+0 records in [2025-09-23 20:05:55.245] 512+0 records out [2025-09-23 20:05:55.293] Starting syslogd/klogd: done [2025-09-23 20:05:55.309] Waiting data available... [2025-09-23 20:05:55.309] DML Start [2025-09-23 20:05:55.469] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:05:55.725] DML res1: 0 [2025-09-23 20:05:56.333] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:05:56.349] Read Success [2025-09-23 20:05:56.349] Verifying certificate... [2025-09-23 20:05:56.589] Verified OK [2025-09-23 20:05:56.620] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:05:58.497] Verified OK [2025-09-23 20:05:58.497] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:05:59.104] Verified OK [2025-09-23 20:05:59.104] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:06:01.758] fs.protected_hardlinks = 1 [2025-09-23 20:06:01.789] fs.protected_symlinks = 1 [2025-09-23 20:06:01.789] kernel.modules_disabled = 1 [2025-09-23 20:06:01.981] [2025-09-23 20:06:01.981] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:06:02.945] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:06:10.560] SBL1:1210.0.1.0 [2025-09-23 20:06:10.608] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:06:12.174] SBL2:1210.0.1.0 [2025-09-23 20:06:12.222] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:06:12.318] j-A [2025-09-23 20:06:19.672] The R5 Autosar Classic is running [2025-09-23 20:06:19.693] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:06:19.693] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:06:20.301] INIT: version 2.96 booting [2025-09-23 20:06:20.413] INIT: Entering runlevel: 5 [2025-09-23 20:06:20.573] mtd28 attached [2025-09-23 20:06:20.573] mtd24 attached [2025-09-23 20:06:20.589] mtd32 attached [2025-09-23 20:06:20.651] ubi0:animations is mounted. [2025-09-23 20:06:20.651] RTNETLINK answers: File exists [2025-09-23 20:06:20.651] ubi1:textures is mounted. [2025-09-23 20:06:20.651] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:06:20.698] ubi2:dml_code is mounted. [2025-09-23 20:06:20.698] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:06:20.698] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:06:20.698] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:06:20.698] data.LB_FadeInType0=100 [2025-09-23 20:06:20.698] data.CHLH_FadeInType0=0 [2025-09-23 20:06:20.698] data.WU_FadeInDelay=0 [2025-09-23 20:06:20.698] max_time_out=0 [2025-09-23 20:06:20.698] No splash screen [2025-09-23 20:06:20.698] stop dss Done [2025-09-23 20:06:20.698] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:06:20.766] /dev/mem opened. [2025-09-23 20:06:20.766] Memory mapped at address 0xffff9a077000. [2025-09-23 20:06:20.766] Read at address 0x00600018 (0xffff9a077018): 0x00000000 [2025-09-23 20:06:20.766] Write at address 0x00600018 (0xffff9a077018): 0x00400040, readback 0x00400040 [2025-09-23 20:06:20.782] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:06:20.798] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:06:20.925] Loaded PowerVR consumer services. [2025-09-23 20:06:21.005] 512+0 records in [2025-09-23 20:06:21.005] 512+0 records out [2025-09-23 20:06:21.037] Waiting data available... [2025-09-23 20:06:21.053] Starting syslogd/klogd: done [2025-09-23 20:06:21.069] DML Start [2025-09-23 20:06:21.230] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:06:21.454] DML res1: 0 [2025-09-23 20:06:21.970] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:06:21.970] Read Success [2025-09-23 20:06:21.970] Verifying certificate... [2025-09-23 20:06:22.210] Verified OK [2025-09-23 20:06:22.226] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:06:23.835] Verified OK [2025-09-23 20:06:23.835] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:06:24.407] Verified OK [2025-09-23 20:06:24.407] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:06:26.966] fs.protected_hardlinks = 1 [2025-09-23 20:06:26.983] fs.protected_symlinks = 1 [2025-09-23 20:06:26.983] kernel.modules_disabled = 1 [2025-09-23 20:06:27.174] [2025-09-23 20:06:27.174] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:06:28.573] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:06:36.279] SBL1:1210.0.1.0 [2025-09-23 20:06:36.327] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:06:37.893] SBL2:1210.0.1.0 [2025-09-23 20:06:37.925] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:06:38.037] j-A [2025-09-23 20:06:45.412] The R5 Autosar Classic is running [2025-09-23 20:06:45.412] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:06:45.412] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:06:46.019] INIT: version 2.96 booting [2025-09-23 20:06:46.132] INIT: Entering runlevel: 5 [2025-09-23 20:06:46.291] mtd28 attached [2025-09-23 20:06:46.291] mtd24 attached [2025-09-23 20:06:46.307] mtd32 attached [2025-09-23 20:06:46.355] ubi0:animations is mounted. [2025-09-23 20:06:46.355] RTNETLINK answers: File exists [2025-09-23 20:06:46.418] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:06:46.418] ubi1:textures is mounted. [2025-09-23 20:06:46.418] ubi2:dml_code is mounted. [2025-09-23 20:06:46.418] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:06:46.418] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:06:46.418] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:06:46.418] data.LB_FadeInType0=100 [2025-09-23 20:06:46.418] data.CHLH_FadeInType0=0 [2025-09-23 20:06:46.418] data.WU_FadeInDelay=0 [2025-09-23 20:06:46.418] max_time_out=0 [2025-09-23 20:06:46.418] No splash screen [2025-09-23 20:06:46.418] stop dss Done [2025-09-23 20:06:46.418] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:06:46.465] /dev/mem opened. [2025-09-23 20:06:46.465] Memory mapped at address 0xffff8179b000. [2025-09-23 20:06:46.512] Read at address 0x00600018 (0xffff8179b018): 0x00000000 [2025-09-23 20:06:46.512] Write at address 0x00600018 (0xffff8179b018): 0x00400040, readback 0x00400040 [2025-09-23 20:06:46.512] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:06:46.512] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:06:46.672] Loaded PowerVR consumer services. [2025-09-23 20:06:46.704] 512+0 records in [2025-09-23 20:06:46.704] 512+0 records out [2025-09-23 20:06:46.752] Starting syslogd/klogd: Waiting data available... [2025-09-23 20:06:46.768] done [2025-09-23 20:06:46.784] DML Start [2025-09-23 20:06:46.912] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:06:47.087] DML res1: 0 [2025-09-23 20:06:47.710] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:06:47.710] Read Success [2025-09-23 20:06:47.710] Verifying certificate... [2025-09-23 20:06:47.934] Verified OK [2025-09-23 20:06:47.966] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:06:49.469] Verified OK [2025-09-23 20:06:49.469] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:06:50.061] Verified OK [2025-09-23 20:06:50.061] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:06:52.891] fs.protected_hardlinks = 1 [2025-09-23 20:06:52.907] fs.protected_symlinks = 1 [2025-09-23 20:06:52.907] kernel.modules_disabled = 1 [2025-09-23 20:06:53.099] [2025-09-23 20:06:53.099] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:06:54.277] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:07:02.024] SBL1:1210.0.1.0 [2025-09-23 20:07:02.071] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:07:03.638] SBL2:1210.0.1.0 [2025-09-23 20:07:03.670] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:07:03.782] j-A [2025-09-23 20:07:11.154] The R5 Autosar Classic is running [2025-09-23 20:07:11.154] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:07:11.154] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:07:11.762] INIT: version 2.96 booting [2025-09-23 20:07:11.874] INIT: Entering runlevel: 5 [2025-09-23 20:07:12.017] mtd24 attached [2025-09-23 20:07:12.034] mtd28 attached [2025-09-23 20:07:12.049] mtd32 attached [2025-09-23 20:07:12.081] ubi0:textures is mounted. [2025-09-23 20:07:12.097] RTNETLINK answers: File exists [2025-09-23 20:07:12.157] ubi1:animations is mounted. [2025-09-23 20:07:12.157] ubi2:dml_code is mounted. [2025-09-23 20:07:12.157] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:07:12.157] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:07:12.157] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:07:12.157] data.LB_FadeInType0=100 [2025-09-23 20:07:12.157] data.CHLH_FadeInType0=0 [2025-09-23 20:07:12.157] data.WU_FadeInDelay=0 [2025-09-23 20:07:12.157] max_time_out=0 [2025-09-23 20:07:12.157] No splash screen [2025-09-23 20:07:12.157] stop dss Done [2025-09-23 20:07:12.157] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:07:12.157] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:07:12.231] /dev/mem opened. [2025-09-23 20:07:12.231] Memory mapped at address 0xffff9fd3c000. [2025-09-23 20:07:12.231] Read at address 0x00600018 (0xffff9fd3c018): 0x00000000 [2025-09-23 20:07:12.231] Write at address 0x00600018 (0xffff9fd3c018): 0x00400040, readback 0x00400040 [2025-09-23 20:07:12.231] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:07:12.263] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:07:12.406] Loaded PowerVR consumer services. [2025-09-23 20:07:12.438] 512+0 records in [2025-09-23 20:07:12.454] 512+0 records out [2025-09-23 20:07:12.487] Waiting data available... [2025-09-23 20:07:12.503] Starting syslogd/klogd: done [2025-09-23 20:07:12.519] DML Start [2025-09-23 20:07:12.662] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:07:12.950] DML res1: 0 [2025-09-23 20:07:13.318] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:07:13.339] Read Success [2025-09-23 20:07:13.339] Verifying certificate... [2025-09-23 20:07:13.563] Verified OK [2025-09-23 20:07:13.579] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:07:15.210] Verified OK [2025-09-23 20:07:15.210] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:07:15.839] Verified OK [2025-09-23 20:07:15.839] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:07:18.542] fs.protected_hardlinks = 1 [2025-09-23 20:07:18.542] fs.protected_symlinks = 1 [2025-09-23 20:07:18.558] kernel.modules_disabled = 1 [2025-09-23 20:07:18.749] [2025-09-23 20:07:18.749] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:07:20.012] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:07:27.780] SBL1:1210.0.1.0 [2025-09-23 20:07:27.812] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:07:29.394] SBL2:1210.0.1.0 [2025-09-23 20:07:29.426] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:07:29.539] j-A [2025-09-23 20:07:36.877] The R5 Autosar Classic is running [2025-09-23 20:07:36.902] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:07:36.902] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:07:37.509] INIT: version 2.96 booting [2025-09-23 20:07:37.621] INIT: Entering runlevel: 5 [2025-09-23 20:07:37.765] mtd24 attached [2025-09-23 20:07:37.781] mtd32 attached [2025-09-23 20:07:37.797] mtd28 attached [2025-09-23 20:07:37.829] ubi0:textures is mounted. [2025-09-23 20:07:37.845] ubi1:dml_code is mounted. [2025-09-23 20:07:37.845] RTNETLINK answers: File exists [2025-09-23 20:07:37.898] ubi2:animations is mounted. [2025-09-23 20:07:37.898] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:07:37.898] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:07:37.898] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:07:37.898] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:07:37.898] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:07:37.898] data.LB_FadeInType0=100 [2025-09-23 20:07:37.898] data.CHLH_FadeInType0=0 [2025-09-23 20:07:37.898] data.WU_FadeInDelay=0 [2025-09-23 20:07:37.898] max_time_out=0 [2025-09-23 20:07:37.898] No splash screen [2025-09-23 20:07:37.898] stop dss Done [2025-09-23 20:07:37.975] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:07:37.975] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:07:37.975] /dev/mem opened. [2025-09-23 20:07:37.975] Memory mapped at address 0xffffb86cb000. [2025-09-23 20:07:37.975] Read at address 0x00600018 (0xffffb86cb018): 0x00000000 [2025-09-23 20:07:37.975] Write at address 0x00600018 (0xffffb86cb018): 0x00400040, readback 0x00400040 [2025-09-23 20:07:38.071] Loaded PowerVR consumer services. [2025-09-23 20:07:38.183] 512+0 records in [2025-09-23 20:07:38.183] 512+0 records out [2025-09-23 20:07:38.215] Waiting data available... [2025-09-23 20:07:38.231] Starting syslogd/klogd: done [2025-09-23 20:07:38.247] DML Start [2025-09-23 20:07:38.391] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:07:38.582] DML res1: 0 [2025-09-23 20:07:39.158] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:07:39.158] Read Success [2025-09-23 20:07:39.158] Verifying certificate... [2025-09-23 20:07:39.381] Verified OK [2025-09-23 20:07:39.397] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:07:40.980] Verified OK [2025-09-23 20:07:40.980] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:07:41.577] Verified OK [2025-09-23 20:07:41.577] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:07:44.328] fs.protected_hardlinks = 1 [2025-09-23 20:07:44.328] fs.protected_symlinks = 1 [2025-09-23 20:07:44.343] kernel.modules_disabled = 1 [2025-09-23 20:07:44.535] [2025-09-23 20:07:44.535] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:07:45.814] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:07:53.503] SBL1:1210.0.1.0 [2025-09-23 20:07:53.551] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:07:55.118] SBL2:1210.0.1.0 [2025-09-23 20:07:55.150] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:07:55.262] j-A [2025-09-23 20:08:02.636] The R5 Autosar Classic is running [2025-09-23 20:08:02.636] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:08:02.636] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:08:03.243] INIT: version 2.96 booting [2025-09-23 20:08:03.355] INIT: Entering runlevel: 5 [2025-09-23 20:08:03.499] mtd24 attached [2025-09-23 20:08:03.515] mtd28 attached [2025-09-23 20:08:03.531] mtd32 attached [2025-09-23 20:08:03.563] ubi0:textures is mounted. [2025-09-23 20:08:03.579] RTNETLINK answers: File exists [2025-09-23 20:08:03.637] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:08:03.637] ubi2:dml_code is mounted. [2025-09-23 20:08:03.637] ubi1:animations is mounted. [2025-09-23 20:08:03.637] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:08:03.637] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:08:03.637] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:08:03.637] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:08:03.637] data.LB_FadeInType0=100 [2025-09-23 20:08:03.637] data.CHLH_FadeInType0=0 [2025-09-23 20:08:03.637] data.WU_FadeInDelay=0 [2025-09-23 20:08:03.637] max_time_out=0 [2025-09-23 20:08:03.637] No splash screen [2025-09-23 20:08:03.637] stop dss Done [2025-09-23 20:08:03.684] /dev/mem opened. [2025-09-23 20:08:03.684] Memory mapped at address 0xffff85e07000. [2025-09-23 20:08:03.722] Read at address 0x00600018 (0xffff85e07018): 0x00000000 [2025-09-23 20:08:03.722] Write at address 0x00600018 (0xffff85e07018): 0x00400040, readback 0x00400040 [2025-09-23 20:08:03.722] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:08:03.722] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:08:03.914] Loaded PowerVR consumer services. [2025-09-23 20:08:03.945] 512+0 records in [2025-09-23 20:08:03.945] 512+0 records out [2025-09-23 20:08:03.961] Waiting data available... [2025-09-23 20:08:03.993] Starting syslogd/klogd: done [2025-09-23 20:08:04.009] DML Start [2025-09-23 20:08:04.154] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:08:04.409] DML res1: 0 [2025-09-23 20:08:04.841] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:08:04.856] Read Success [2025-09-23 20:08:04.856] Verifying certificate... [2025-09-23 20:08:05.097] Verified OK [2025-09-23 20:08:05.112] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:08:06.915] Verified OK [2025-09-23 20:08:06.915] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:08:07.443] Verified OK [2025-09-23 20:08:07.443] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:08:09.921] fs.protected_hardlinks = 1 [2025-09-23 20:08:09.937] fs.protected_symlinks = 1 [2025-09-23 20:08:09.937] kernel.modules_disabled = 1 [2025-09-23 20:08:10.144] [2025-09-23 20:08:10.144] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:08:11.604] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:08:19.245] SBL1:1210.0.1.0 [2025-09-23 20:08:19.292] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:08:20.859] SBL2:1210.0.1.0 [2025-09-23 20:08:20.891] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:08:21.003] j-A [2025-09-23 20:08:28.380] The R5 Autosar Classic is running [2025-09-23 20:08:28.380] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:08:28.380] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:08:28.987] INIT: version 2.96 booting [2025-09-23 20:08:29.098] INIT: Entering runlevel: 5 [2025-09-23 20:08:29.259] mtd28 attached [2025-09-23 20:08:29.259] mtd24 attached [2025-09-23 20:08:29.275] mtd32 attached [2025-09-23 20:08:29.291] ubi0:animations is mounted. [2025-09-23 20:08:29.322] ubi1:textures is mounted. [2025-09-23 20:08:29.370] RTNETLINK answers: File exists [2025-09-23 20:08:29.370] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:08:29.370] ubi2:dml_code is mounted. [2025-09-23 20:08:29.370] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:08:29.370] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:08:29.370] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:08:29.370] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:08:29.370] data.LB_FadeInType0=100 [2025-09-23 20:08:29.370] data.CHLH_FadeInType0=0 [2025-09-23 20:08:29.391] data.WU_FadeInDelay=0 [2025-09-23 20:08:29.391] max_time_out=0 [2025-09-23 20:08:29.391] No splash screen [2025-09-23 20:08:29.391] stop dss Done [2025-09-23 20:08:29.438] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:08:29.438] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:08:29.470] /dev/mem opened. [2025-09-23 20:08:29.470] Memory mapped at address 0xffffaecd8000. [2025-09-23 20:08:29.470] Read at address 0x00600018 (0xffffaecd8018): 0x00000000 [2025-09-23 20:08:29.470] Write at address 0x00600018 (0xffffaecd8018): 0x00400040, readback 0x00400040 [2025-09-23 20:08:29.631] Loaded PowerVR consumer services. [2025-09-23 20:08:29.678] 512+0 records in [2025-09-23 20:08:29.678] 512+0 records out [2025-09-23 20:08:29.694] Waiting data available... [2025-09-23 20:08:29.710] Starting syslogd/klogd: done [2025-09-23 20:08:29.726] DML Start [2025-09-23 20:08:29.902] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:08:30.126] DML res1: 0 [2025-09-23 20:08:30.554] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:08:30.554] Read Success [2025-09-23 20:08:30.554] Verifying certificate... [2025-09-23 20:08:30.794] Verified OK [2025-09-23 20:08:30.809] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:08:32.512] Verified OK [2025-09-23 20:08:32.512] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:08:33.199] Verified OK [2025-09-23 20:08:33.199] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:08:35.821] fs.protected_hardlinks = 1 [2025-09-23 20:08:35.837] fs.protected_symlinks = 1 [2025-09-23 20:08:35.837] kernel.modules_disabled = 1 [2025-09-23 20:08:36.028] [2025-09-23 20:08:36.028] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:08:37.264] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:08:44.979] SBL1:1210.0.1.0 [2025-09-23 20:08:45.027] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:08:46.609] SBL2:1210.0.1.0 [2025-09-23 20:08:46.641] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:08:46.738] j-A [2025-09-23 20:08:54.094] The R5 Autosar Classic is running [2025-09-23 20:08:54.114] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:08:54.114] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:08:54.722] INIT: version 2.96 booting [2025-09-23 20:08:54.834] INIT: Entering runlevel: 5 [2025-09-23 20:08:54.994] mtd32 attached [2025-09-23 20:08:54.994] mtd28 attached [2025-09-23 20:08:55.010] mtd24 attached [2025-09-23 20:08:55.042] ubi0:dml_code is mounted. [2025-09-23 20:08:55.058] RTNETLINK answers: File exists [2025-09-23 20:08:55.121] ubi1:animations is mounted. [2025-09-23 20:08:55.121] ubi2:textures is mounted. [2025-09-23 20:08:55.121] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:08:55.121] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:08:55.121] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:08:55.121] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:08:55.121] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:08:55.121] data.LB_FadeInType0=100 [2025-09-23 20:08:55.121] data.CHLH_FadeInType0=0 [2025-09-23 20:08:55.121] data.WU_FadeInDelay=0 [2025-09-23 20:08:55.121] max_time_out=0 [2025-09-23 20:08:55.121] No splash screen [2025-09-23 20:08:55.121] stop dss Done [2025-09-23 20:08:55.153] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:08:55.202] /dev/mem opened. [2025-09-23 20:08:55.202] Memory mapped at address 0xffff9f3dc000. [2025-09-23 20:08:55.202] Read at address 0x00600018 (0xffff9f3dc018): 0x00000000 [2025-09-23 20:08:55.202] Write at address 0x00600018 (0xffff9f3dc018): 0x00400040, readback 0x00400040 [2025-09-23 20:08:55.202] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:08:55.346] Loaded PowerVR consumer services. [2025-09-23 20:08:55.394] 512+0 records in [2025-09-23 20:08:55.394] 512+0 records out [2025-09-23 20:08:55.425] Waiting data available... [2025-09-23 20:08:55.441] Starting syslogd/klogd: done [2025-09-23 20:08:55.458] DML Start [2025-09-23 20:08:55.634] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:08:55.858] DML res1: 0 [2025-09-23 20:08:56.460] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:08:56.460] Read Success [2025-09-23 20:08:56.460] Verifying certificate... [2025-09-23 20:08:56.699] Verified OK [2025-09-23 20:08:56.715] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:08:58.410] Verified OK [2025-09-23 20:08:58.410] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:08:59.045] Verified OK [2025-09-23 20:08:59.045] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:09:01.586] fs.protected_hardlinks = 1 [2025-09-23 20:09:01.602] fs.protected_symlinks = 1 [2025-09-23 20:09:01.602] kernel.modules_disabled = 1 [2025-09-23 20:09:01.794] [2025-09-23 20:09:01.794] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:09:02.989] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:09:10.755] SBL1:1210.0.1.0 [2025-09-23 20:09:10.787] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:09:12.371] SBL2:1210.0.1.0 [2025-09-23 20:09:12.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:09:12.498] j-A [2025-09-23 20:09:19.854] The R5 Autosar Classic is running [2025-09-23 20:09:19.878] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:09:19.878] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:09:20.486] INIT: version 2.96 booting [2025-09-23 20:09:20.598] INIT: Entering runlevel: 5 [2025-09-23 20:09:20.758] mtd28 attached [2025-09-23 20:09:20.758] mtd24 attached [2025-09-23 20:09:20.774] mtd32 attached [2025-09-23 20:09:20.822] ubi0:animations is mounted. [2025-09-23 20:09:20.822] RTNETLINK answers: File exists [2025-09-23 20:09:20.865] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:09:20.865] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:09:20.865] ubi1:textures is mounted. [2025-09-23 20:09:20.865] ubi2:dml_code is mounted. [2025-09-23 20:09:20.865] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:09:20.865] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:09:20.865] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:09:20.886] data.LB_FadeInType0=100 [2025-09-23 20:09:20.886] data.CHLH_FadeInType0=0 [2025-09-23 20:09:20.886] data.WU_FadeInDelay=0 [2025-09-23 20:09:20.886] max_time_out=0 [2025-09-23 20:09:20.886] No splash screen [2025-09-23 20:09:20.886] stop dss Done [2025-09-23 20:09:20.978] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:09:20.978] /dev/mem opened. [2025-09-23 20:09:20.978] Memory mapped at address 0xffffbcc91000. [2025-09-23 20:09:20.978] Read at address 0x00600018 (0xffffbcc91018): 0x00000000 [2025-09-23 20:09:20.978] Write at address 0x00600018 (0xffffbcc91018): 0x00400040, readback 0x00400040 [2025-09-23 20:09:20.978] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:09:21.139] Loaded PowerVR consumer services. [2025-09-23 20:09:21.186] 512+0 records in [2025-09-23 20:09:21.186] 512+0 records out [2025-09-23 20:09:21.202] Waiting data available... [2025-09-23 20:09:21.234] Starting syslogd/klogd: done [2025-09-23 20:09:21.251] DML Start [2025-09-23 20:09:21.427] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:09:21.635] DML res1: 0 [2025-09-23 20:09:22.105] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:09:22.105] Read Success [2025-09-23 20:09:22.105] Verifying certificate... [2025-09-23 20:09:22.377] Verified OK [2025-09-23 20:09:22.393] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:09:24.040] Verified OK [2025-09-23 20:09:24.040] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:09:24.668] Verified OK [2025-09-23 20:09:24.668] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:09:27.371] fs.protected_hardlinks = 1 [2025-09-23 20:09:27.397] fs.protected_symlinks = 1 [2025-09-23 20:09:27.397] kernel.modules_disabled = 1 [2025-09-23 20:09:27.572] [2025-09-23 20:09:27.572] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:09:28.808] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:09:36.498] SBL1:1210.0.1.0 [2025-09-23 20:09:36.546] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 20:09:38.113] SBL2:1210.0.1.0 [2025-09-23 20:09:38.160] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 20:09:38.257] j-A [2025-09-23 20:09:45.632] The R5 Autosar Classic is running [2025-09-23 20:09:45.632] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:09:45.632] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:09:46.240] INIT: version 2.96 booting [2025-09-23 20:09:46.335] INIT: Entering runlevel: 5 [2025-09-23 20:09:46.496] mtd28 attached [2025-09-23 20:09:46.511] mtd24 attached [2025-09-23 20:09:46.528] mtd32 attached [2025-09-23 20:09:46.544] ubi0:animations is mounted. [2025-09-23 20:09:46.575] RTNETLINK answers: File exists [2025-09-23 20:09:46.612] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:09:46.612] ubi2:dml_code is mounted. [2025-09-23 20:09:46.612] ubi1:textures is mounted. [2025-09-23 20:09:46.612] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:09:46.612] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:09:46.612] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:09:46.612] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:09:46.634] data.LB_FadeInType0=100 [2025-09-23 20:09:46.634] data.CHLH_FadeInType0=0 [2025-09-23 20:09:46.634] data.WU_FadeInDelay=0 [2025-09-23 20:09:46.634] max_time_out=0 [2025-09-23 20:09:46.634] No splash screen [2025-09-23 20:09:46.634] stop dss Done [2025-09-23 20:09:46.702] /dev/mem opened. [2025-09-23 20:09:46.702] Memory mapped at address 0xffffa768d000. [2025-09-23 20:09:46.702] Read at address 0x00600018 (0xffffa768d018): 0x00000000 [2025-09-23 20:09:46.702] Write at address 0x00600018 (0xffffa768d018): 0x00400040, readback 0x00400040 [2025-09-23 20:09:46.702] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:09:46.718] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:09:46.878] Loaded PowerVR consumer services. [2025-09-23 20:09:46.926] 512+0 records in [2025-09-23 20:09:46.926] 512+0 records out [2025-09-23 20:09:46.958] Starting syslogd/klogd: Waiting data available... [2025-09-23 20:09:46.973] done [2025-09-23 20:09:46.973] DML Start [2025-09-23 20:09:47.165] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:09:47.390] DML res1: 0 [2025-09-23 20:09:47.853] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:09:47.869] Read Success [2025-09-23 20:09:47.869] Verifying certificate... [2025-09-23 20:09:48.077] Verified OK [2025-09-23 20:09:48.093] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:09:49.787] Verified OK [2025-09-23 20:09:49.787] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:09:50.389] Verified OK [2025-09-23 20:09:50.389] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:09:52.963] fs.protected_hardlinks = 1 [2025-09-23 20:09:52.979] fs.protected_symlinks = 1 [2025-09-23 20:09:52.979] kernel.modules_disabled = 1 [2025-09-23 20:09:53.187] [2025-09-23 20:09:53.187] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:09:54.469] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:10:02.238] SBL1:1210.0.1.0 [2025-09-23 20:10:02.270] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:10:03.853] SBL2:1210.0.1.0 [2025-09-23 20:10:03.884] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:10:03.996] j-A [2025-09-23 20:10:11.335] The R5 Autosar Classic is running [2025-09-23 20:10:11.360] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:10:11.360] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:10:11.968] INIT: version 2.96 booting [2025-09-23 20:10:12.080] INIT: Entering runlevel: 5 [2025-09-23 20:10:12.240] mtd32 attached [2025-09-23 20:10:12.240] mtd24 attached [2025-09-23 20:10:12.256] mtd28 attached [2025-09-23 20:10:12.304] ubi0:dml_code is mounted. [2025-09-23 20:10:12.370] RTNETLINK answers: File exists [2025-09-23 20:10:12.370] ubi2:animations is mounted. [2025-09-23 20:10:12.370] ubi1:textures is mounted. [2025-09-23 20:10:12.370] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:10:12.370] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:10:12.370] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:10:12.370] data.LB_FadeInType0=100 [2025-09-23 20:10:12.370] data.CHLH_FadeInType0=0 [2025-09-23 20:10:12.370] data.WU_FadeInDelay=0 [2025-09-23 20:10:12.370] max_time_out=0 [2025-09-23 20:10:12.370] No splash screen [2025-09-23 20:10:12.370] stop dss Done [2025-09-23 20:10:12.370] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:10:12.370] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:10:12.446] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:10:12.446] /dev/mem opened. [2025-09-23 20:10:12.446] Memory mapped at address 0xffffbefde000. [2025-09-23 20:10:12.446] Read at address 0x00600018 (0xffffbefde018): 0x00000000 [2025-09-23 20:10:12.446] Write at address 0x00600018 (0xffffbefde018): 0x00400040, readback 0x00400040 [2025-09-23 20:10:12.446] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:10:12.622] Loaded PowerVR consumer services. [2025-09-23 20:10:12.670] 512+0 records in [2025-09-23 20:10:12.670] 512+0 records out [2025-09-23 20:10:12.703] Waiting data available... [2025-09-23 20:10:12.719] Starting syslogd/klogd: done [2025-09-23 20:10:12.735] DML Start [2025-09-23 20:10:12.910] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:10:13.166] DML res1: 0 [2025-09-23 20:10:13.460] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:10:13.460] Read Success [2025-09-23 20:10:13.460] Verifying certificate... [2025-09-23 20:10:13.779] Verified OK [2025-09-23 20:10:13.795] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:10:15.362] Verified OK [2025-09-23 20:10:15.362] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:10:15.971] Verified OK [2025-09-23 20:10:15.971] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:10:18.673] fs.protected_hardlinks = 1 [2025-09-23 20:10:18.688] fs.protected_symlinks = 1 [2025-09-23 20:10:18.688] kernel.modules_disabled = 1 [2025-09-23 20:10:18.897] [2025-09-23 20:10:18.897] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:10:20.236] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:10:27.969] SBL1:1210.0.1.0 [2025-09-23 20:10:28.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:10:29.584] SBL2:1210.0.1.0 [2025-09-23 20:10:29.632] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:10:29.727] j-A [2025-09-23 20:10:37.082] The R5 Autosar Classic is running [2025-09-23 20:10:37.103] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:10:37.103] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:10:37.711] INIT: version 2.96 booting [2025-09-23 20:10:37.822] INIT: Entering runlevel: 5 [2025-09-23 20:10:37.983] mtd32 attached [2025-09-23 20:10:37.983] mtd24 attached [2025-09-23 20:10:37.998] mtd28 attached [2025-09-23 20:10:38.046] RTNETLINK answers: File exists [2025-09-23 20:10:38.046] ubi0:dml_code is mounted. [2025-09-23 20:10:38.082] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:10:38.082] ubi1:textures is mounted. [2025-09-23 20:10:38.082] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:10:38.082] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:10:38.082] ubi2:animations is mounted. [2025-09-23 20:10:38.082] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:10:38.082] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:10:38.110] data.LB_FadeInType0=100 [2025-09-23 20:10:38.110] data.CHLH_FadeInType0=0 [2025-09-23 20:10:38.110] data.WU_FadeInDelay=0 [2025-09-23 20:10:38.110] max_time_out=0 [2025-09-23 20:10:38.110] No splash screen [2025-09-23 20:10:38.110] stop dss Done [2025-09-23 20:10:38.190] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:10:38.190] /dev/mem opened. [2025-09-23 20:10:38.190] Memory mapped at address 0xffffa084e000. [2025-09-23 20:10:38.190] Read at address 0x00600018 (0xffffa084e018): 0x00000000 [2025-09-23 20:10:38.190] Write at address 0x00600018 (0xffffa084e018): 0x00400040, readback 0x00400040 [2025-09-23 20:10:38.190] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:10:38.302] Loaded PowerVR consumer services. [2025-09-23 20:10:38.398] 512+0 records in [2025-09-23 20:10:38.398] 512+0 records out [2025-09-23 20:10:38.430] Waiting data available... [2025-09-23 20:10:38.446] Starting syslogd/klogd: done [2025-09-23 20:10:38.478] DML Start [2025-09-23 20:10:38.622] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:10:38.910] DML res1: 0 [2025-09-23 20:10:39.246] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:10:39.246] Read Success [2025-09-23 20:10:39.262] Verifying certificate... [2025-09-23 20:10:39.502] Verified OK [2025-09-23 20:10:39.518] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:10:41.221] Verified OK [2025-09-23 20:10:41.221] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:10:41.781] Verified OK [2025-09-23 20:10:41.781] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:10:44.340] fs.protected_hardlinks = 1 [2025-09-23 20:10:44.356] fs.protected_symlinks = 1 [2025-09-23 20:10:44.372] kernel.modules_disabled = 1 [2025-09-23 20:10:44.563] [2025-09-23 20:10:44.563] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:10:45.996] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:10:53.725] SBL1:1210.0.1.0 [2025-09-23 20:10:53.757] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:10:55.339] SBL2:1210.0.1.0 [2025-09-23 20:10:55.371] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:10:55.483] j-A [2025-09-23 20:11:02.821] The R5 Autosar Classic is running [2025-09-23 20:11:02.852] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:11:02.852] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:11:03.460] INIT: version 2.96 booting [2025-09-23 20:11:03.571] INIT: Entering runlevel: 5 [2025-09-23 20:11:03.716] mtd32 attached [2025-09-23 20:11:03.732] mtd24 attached [2025-09-23 20:11:03.732] mtd28 attached [2025-09-23 20:11:03.828] RTNETLINK answers: File exists [2025-09-23 20:11:03.828] ubi0:dml_code is mounted. [2025-09-23 20:11:03.828] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:11:03.828] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:11:03.828] ubi2:animations is mounted. [2025-09-23 20:11:03.828] ubi1:textures is mounted. [2025-09-23 20:11:03.828] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:11:03.828] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:11:03.828] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:11:03.854] data.LB_FadeInType0=100 [2025-09-23 20:11:03.854] data.CHLH_FadeInType0=0 [2025-09-23 20:11:03.854] data.WU_FadeInDelay=0 [2025-09-23 20:11:03.854] max_time_out=0 [2025-09-23 20:11:03.854] No splash screen [2025-09-23 20:11:03.854] stop dss Done [2025-09-23 20:11:03.883] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:11:03.883] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:11:03.934] /dev/mem opened. [2025-09-23 20:11:03.934] Memory mapped at address 0xffffa576a000. [2025-09-23 20:11:03.934] Read at address 0x00600018 (0xffffa576a018): 0x00000000 [2025-09-23 20:11:03.934] Write at address 0x00600018 (0xffffa576a018): 0x00400040, readback 0x00400040 [2025-09-23 20:11:04.109] Loaded PowerVR consumer services. [2025-09-23 20:11:04.142] 512+0 records in [2025-09-23 20:11:04.142] 512+0 records out [2025-09-23 20:11:04.174] Waiting data available... [2025-09-23 20:11:04.206] Starting syslogd/klogd: done [2025-09-23 20:11:04.222] DML Start [2025-09-23 20:11:04.414] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:11:04.621] DML res1: 0 [2025-09-23 20:11:05.068] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:11:05.068] Read Success [2025-09-23 20:11:05.068] Verifying certificate... [2025-09-23 20:11:05.324] Verified OK [2025-09-23 20:11:05.340] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:11:07.067] Verified OK [2025-09-23 20:11:07.088] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:11:07.739] Verified OK [2025-09-23 20:11:07.739] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:11:10.346] fs.protected_hardlinks = 1 [2025-09-23 20:11:10.346] fs.protected_symlinks = 1 [2025-09-23 20:11:10.362] kernel.modules_disabled = 1 [2025-09-23 20:11:10.554] [2025-09-23 20:11:10.554] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:11:11.731] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:11:19.456] SBL1:1210.0.1.0 [2025-09-23 20:11:19.488] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:11:21.071] SBL2:1210.0.1.0 [2025-09-23 20:11:21.103] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:11:21.199] j-A [2025-09-23 20:11:28.553] The R5 Autosar Classic is running [2025-09-23 20:11:28.576] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:11:28.576] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:11:29.184] INIT: version 2.96 booting [2025-09-23 20:11:29.295] INIT: Entering runlevel: 5 [2025-09-23 20:11:29.456] mtd32 attached [2025-09-23 20:11:29.456] mtd24 attached [2025-09-23 20:11:29.472] mtd28 attached [2025-09-23 20:11:29.504] ubi0:dml_code is mounted. [2025-09-23 20:11:29.520] RTNETLINK answers: File exists [2025-09-23 20:11:29.520] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:11:29.570] ubi1:textures is mounted. [2025-09-23 20:11:29.570] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:11:29.570] ubi2:animations is mounted. [2025-09-23 20:11:29.570] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:11:29.570] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:11:29.570] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:11:29.570] data.LB_FadeInType0=100 [2025-09-23 20:11:29.570] data.CHLH_FadeInType0=0 [2025-09-23 20:11:29.570] data.WU_FadeInDelay=0 [2025-09-23 20:11:29.570] max_time_out=0 [2025-09-23 20:11:29.570] No splash screen [2025-09-23 20:11:29.570] stop dss Done [2025-09-23 20:11:29.601] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:11:29.637] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:11:29.637] /dev/mem opened. [2025-09-23 20:11:29.637] Memory mapped at address 0xffff9fe54000. [2025-09-23 20:11:29.637] Read at address 0x00600018 (0xffff9fe54018): 0x00000000 [2025-09-23 20:11:29.637] Write at address 0x00600018 (0xffff9fe54018): 0x00400040, readback 0x00400040 [2025-09-23 20:11:29.813] Loaded PowerVR consumer services. [2025-09-23 20:11:29.861] 512+0 records in [2025-09-23 20:11:29.861] 512+0 records out [2025-09-23 20:11:29.893] Waiting data available... [2025-09-23 20:11:29.909] Starting syslogd/klogd: done [2025-09-23 20:11:29.925] DML Start [2025-09-23 20:11:30.117] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:11:30.325] DML res1: 0 [2025-09-23 20:11:30.796] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:11:30.796] Read Success [2025-09-23 20:11:30.796] Verifying certificate... [2025-09-23 20:11:31.020] Verified OK [2025-09-23 20:11:31.036] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:11:32.729] Verified OK [2025-09-23 20:11:32.729] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:11:33.350] Verified OK [2025-09-23 20:11:33.350] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:11:35.876] fs.protected_hardlinks = 1 [2025-09-23 20:11:35.893] fs.protected_symlinks = 1 [2025-09-23 20:11:35.893] kernel.modules_disabled = 1 [2025-09-23 20:11:36.101] [2025-09-23 20:11:36.101] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:11:37.476] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:11:45.192] SBL1:1210.0.1.0 [2025-09-23 20:11:45.240] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:11:46.807] SBL2:1210.0.1.0 [2025-09-23 20:11:46.839] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:11:46.951] j-A [2025-09-23 20:11:54.324] The R5 Autosar Classic is running [2025-09-23 20:11:54.324] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:11:54.324] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:11:54.932] INIT: version 2.96 booting [2025-09-23 20:11:55.027] INIT: Entering runlevel: 5 [2025-09-23 20:11:55.187] mtd32 attached [2025-09-23 20:11:55.203] mtd28 attached [2025-09-23 20:11:55.203] mtd24 attached [2025-09-23 20:11:55.267] RTNETLINK answers: File exists [2025-09-23 20:11:55.267] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:11:55.308] ubi1:animations is mounted. [2025-09-23 20:11:55.308] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:11:55.308] ubi0:dml_code is mounted. [2025-09-23 20:11:55.308] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:11:55.308] ubi2:textures is mounted. [2025-09-23 20:11:55.308] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:11:55.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:11:55.329] data.LB_FadeInType0=100 [2025-09-23 20:11:55.329] data.CHLH_FadeInType0=0 [2025-09-23 20:11:55.329] data.WU_FadeInDelay=0 [2025-09-23 20:11:55.329] max_time_out=0 [2025-09-23 20:11:55.329] No splash screen [2025-09-23 20:11:55.329] stop dss Done [2025-09-23 20:11:55.394] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:11:55.394] /dev/mem opened. [2025-09-23 20:11:55.394] Memory mapped at address 0xffff88158000. [2025-09-23 20:11:55.394] Read at address 0x00600018 (0xffff88158018): 0x00000000 [2025-09-23 20:11:55.394] Write at address 0x00600018 (0xffff88158018): 0x00400040, readback 0x00400040 [2025-09-23 20:11:55.394] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:11:55.505] Loaded PowerVR consumer services. [2025-09-23 20:11:55.642] Waiting data available... [2025-09-23 20:11:55.642] 512+0 records in [2025-09-23 20:11:55.642] 512+0 records out [2025-09-23 20:11:55.658] Starting syslogd/klogd: done [2025-09-23 20:11:55.674] DML Start [2025-09-23 20:11:55.849] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:11:56.138] DML res1: 0 [2025-09-23 20:11:56.489] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:11:56.512] Read Success [2025-09-23 20:11:56.512] Verifying certificate... [2025-09-23 20:11:56.784] Verified OK [2025-09-23 20:11:56.800] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:11:58.536] Verified OK [2025-09-23 20:11:58.536] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:11:59.153] Verified OK [2025-09-23 20:11:59.153] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:12:01.759] fs.protected_hardlinks = 1 [2025-09-23 20:12:01.775] fs.protected_symlinks = 1 [2025-09-23 20:12:01.791] kernel.modules_disabled = 1 [2025-09-23 20:12:01.983] [2025-09-23 20:12:01.983] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:12:03.177] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:12:10.926] SBL1:1210.0.1.0 [2025-09-23 20:12:10.974] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:12:12.540] SBL2:1210.0.1.0 [2025-09-23 20:12:12.572] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:12:12.684] j-A [2025-09-23 20:12:20.039] The R5 Autosar Classic is running [2025-09-23 20:12:20.039] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:12:20.060] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:12:20.667] INIT: version 2.96 booting [2025-09-23 20:12:20.780] INIT: Entering runlevel: 5 [2025-09-23 20:12:20.923] mtd24 attached [2025-09-23 20:12:20.939] mtd28 attached [2025-09-23 20:12:20.955] mtd32 attached [2025-09-23 20:12:21.004] ubi0:textures is mounted. [2025-09-23 20:12:21.004] RTNETLINK answers: File exists [2025-09-23 20:12:21.062] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:12:21.062] ubi1:animations is mounted. [2025-09-23 20:12:21.062] ubi2:dml_code is mounted. [2025-09-23 20:12:21.062] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:12:21.062] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:12:21.062] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:12:21.062] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:12:21.062] data.LB_FadeInType0=100 [2025-09-23 20:12:21.062] data.CHLH_FadeInType0=0 [2025-09-23 20:12:21.062] data.WU_FadeInDelay=0 [2025-09-23 20:12:21.062] max_time_out=0 [2025-09-23 20:12:21.062] No splash screen [2025-09-23 20:12:21.062] stop dss Done [2025-09-23 20:12:21.094] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:12:21.127] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:12:21.127] /dev/mem opened. [2025-09-23 20:12:21.127] Memory mapped at address 0xffffa1a2e000. [2025-09-23 20:12:21.127] Read at address 0x00600018 (0xffffa1a2e018): 0x00000000 [2025-09-23 20:12:21.127] Write at address 0x00600018 (0xffffa1a2e018): 0x00400040, readback 0x00400040 [2025-09-23 20:12:21.334] Loaded PowerVR consumer services. [2025-09-23 20:12:21.380] Waiting data available... [2025-09-23 20:12:21.380] 512+0 records in [2025-09-23 20:12:21.380] 512+0 records out [2025-09-23 20:12:21.396] Starting syslogd/klogd: done [2025-09-23 20:12:21.412] DML Start [2025-09-23 20:12:21.588] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:12:21.780] DML res1: 0 [2025-09-23 20:12:22.344] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:12:22.344] Read Success [2025-09-23 20:12:22.344] Verifying certificate... [2025-09-23 20:12:22.583] Verified OK [2025-09-23 20:12:22.599] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:12:24.243] Verified OK [2025-09-23 20:12:24.243] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:12:24.850] Verified OK [2025-09-23 20:12:24.866] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:12:27.552] fs.protected_hardlinks = 1 [2025-09-23 20:12:27.552] fs.protected_symlinks = 1 [2025-09-23 20:12:27.568] kernel.modules_disabled = 1 [2025-09-23 20:12:27.760] [2025-09-23 20:12:27.760] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:12:28.907] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:12:36.675] SBL1:1210.0.1.0 [2025-09-23 20:12:36.723] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:12:38.290] SBL2:1210.0.1.0 [2025-09-23 20:12:38.322] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:12:38.433] j-A [2025-09-23 20:12:45.807] The R5 Autosar Classic is running [2025-09-23 20:12:45.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:12:45.807] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:12:46.415] INIT: version 2.96 booting [2025-09-23 20:12:46.527] INIT: Entering runlevel: 5 [2025-09-23 20:12:46.671] mtd24 attached [2025-09-23 20:12:46.687] mtd28 attached [2025-09-23 20:12:46.703] mtd32 attached [2025-09-23 20:12:46.735] ubi0:textures is mounted. [2025-09-23 20:12:46.751] RTNETLINK answers: File exists [2025-09-23 20:12:46.751] ubi1:animations is mounted. [2025-09-23 20:12:46.808] ubi2:dml_code is mounted. [2025-09-23 20:12:46.808] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:12:46.808] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:12:46.808] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:12:46.808] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:12:46.808] data.LB_FadeInType0=100 [2025-09-23 20:12:46.808] data.CHLH_FadeInType0=0 [2025-09-23 20:12:46.808] data.WU_FadeInDelay=0 [2025-09-23 20:12:46.808] max_time_out=0 [2025-09-23 20:12:46.808] No splash screen [2025-09-23 20:12:46.808] stop dss Done [2025-09-23 20:12:46.808] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:12:46.886] /dev/mem opened. [2025-09-23 20:12:46.886] Memory mapped at address 0xffffae286000. [2025-09-23 20:12:46.886] Read at address 0x00600018 (0xffffae286018): 0x00000000 [2025-09-23 20:12:46.886] Write at address 0x00600018 (0xffffae286018): 0x00400040, readback 0x00400040 [2025-09-23 20:12:46.886] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:12:46.886] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:12:47.062] Loaded PowerVR consumer services. [2025-09-23 20:12:47.133] Waiting data available... [2025-09-23 20:12:47.133] 512+0 records in [2025-09-23 20:12:47.133] 512+0 records out [2025-09-23 20:12:47.165] Starting syslogd/klogd: done [2025-09-23 20:12:47.181] DML Start [2025-09-23 20:12:47.341] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:12:47.581] DML res1: 0 [2025-09-23 20:12:48.044] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:12:48.066] Read Success [2025-09-23 20:12:48.066] Verifying certificate... [2025-09-23 20:12:48.273] Verified OK [2025-09-23 20:12:48.289] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:12:49.948] Verified OK [2025-09-23 20:12:49.948] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:12:50.614] Verified OK [2025-09-23 20:12:50.614] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:12:53.251] fs.protected_hardlinks = 1 [2025-09-23 20:12:53.251] fs.protected_symlinks = 1 [2025-09-23 20:12:53.267] kernel.modules_disabled = 1 [2025-09-23 20:12:53.459] [2025-09-23 20:12:53.459] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:12:54.679] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:13:02.412] SBL1:1210.0.1.0 [2025-09-23 20:13:02.444] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:13:04.026] SBL2:1210.0.1.0 [2025-09-23 20:13:04.058] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 20:13:04.170] j-A [2025-09-23 20:13:11.511] The R5 Autosar Classic is running [2025-09-23 20:13:11.535] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:13:11.535] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:13:12.143] INIT: version 2.96 booting [2025-09-23 20:13:12.255] INIT: Entering runlevel: 5 [2025-09-23 20:13:12.414] mtd28 attached [2025-09-23 20:13:12.430] mtd32 attached [2025-09-23 20:13:12.446] mtd24 attached [2025-09-23 20:13:12.462] ubi0:animations is mounted. [2025-09-23 20:13:12.519] ubi1:dml_code is mounted. [2025-09-23 20:13:12.519] RTNETLINK answers: File exists [2025-09-23 20:13:12.519] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:13:12.519] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:13:12.519] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:13:12.519] ubi2:textures is mounted. [2025-09-23 20:13:12.519] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:13:12.519] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:13:12.545] data.LB_FadeInType0=100 [2025-09-23 20:13:12.545] data.CHLH_FadeInType0=0 [2025-09-23 20:13:12.545] data.WU_FadeInDelay=0 [2025-09-23 20:13:12.545] max_time_out=0 [2025-09-23 20:13:12.545] No splash screen [2025-09-23 20:13:12.545] stop dss Done [2025-09-23 20:13:12.593] /dev/mem opened. [2025-09-23 20:13:12.593] Memory mapped at address 0xffff84688000. [2025-09-23 20:13:12.630] Read at address 0x00600018 (0xffff84688018): 0x00000000 [2025-09-23 20:13:12.630] Write at address 0x00600018 (0xffff84688018): 0x00400040, readback 0x00400040 [2025-09-23 20:13:12.630] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:13:12.630] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:13:12.789] Loaded PowerVR consumer services. [2025-09-23 20:13:12.821] 512+0 records in [2025-09-23 20:13:12.821] 512+0 records out [2025-09-23 20:13:12.885] Starting syslogd/klogd: Waiting data available... [2025-09-23 20:13:12.901] done [2025-09-23 20:13:12.901] DML Start [2025-09-23 20:13:13.061] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:13:13.301] DML res1: 0 [2025-09-23 20:13:13.701] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:13:13.722] Read Success [2025-09-23 20:13:13.722] Verifying certificate... [2025-09-23 20:13:13.962] Verified OK [2025-09-23 20:13:13.993] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:13:15.624] Verified OK [2025-09-23 20:13:15.624] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:13:16.232] Verified OK [2025-09-23 20:13:16.232] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:13:19.024] fs.protected_hardlinks = 1 [2025-09-23 20:13:19.024] fs.protected_symlinks = 1 [2025-09-23 20:13:19.024] kernel.modules_disabled = 1 [2025-09-23 20:13:19.216] [2025-09-23 20:13:19.216] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:13:20.380] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:13:28.146] SBL1:1210.0.1.0 [2025-09-23 20:13:28.178] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:13:29.761] SBL2:1210.0.1.0 [2025-09-23 20:13:29.793] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:13:29.889] j-A [2025-09-23 20:13:37.245] The R5 Autosar Classic is running [2025-09-23 20:13:37.268] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:13:37.268] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:13:37.876] INIT: version 2.96 booting [2025-09-23 20:13:37.987] INIT: Entering runlevel: 5 [2025-09-23 20:13:38.131] mtd24 attached [2025-09-23 20:13:38.148] mtd28 attached [2025-09-23 20:13:38.180] ubi0:textures is mounted. [2025-09-23 20:13:38.195] mtd32 attached [2025-09-23 20:13:38.195] ubi1:animations is mounted. [2025-09-23 20:13:38.211] RTNETLINK answers: File exists [2025-09-23 20:13:38.271] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:13:38.271] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:13:38.271] ubi2:dml_code is mounted. [2025-09-23 20:13:38.271] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:13:38.271] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:13:38.271] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:13:38.271] data.LB_FadeInType0=100 [2025-09-23 20:13:38.271] data.CHLH_FadeInType0=0 [2025-09-23 20:13:38.271] data.WU_FadeInDelay=0 [2025-09-23 20:13:38.271] max_time_out=0 [2025-09-23 20:13:38.271] No splash screen [2025-09-23 20:13:38.271] stop dss Done [2025-09-23 20:13:38.336] /dev/mem opened. [2025-09-23 20:13:38.336] Memory mapped at address 0xffffbe1c0000. [2025-09-23 20:13:38.336] Read at address 0x00600018 (0xffffbe1c0018): 0x00000000 [2025-09-23 20:13:38.336] Write at address 0x00600018 (0xffffbe1c0018): 0x00400040, readback 0x00400040 [2025-09-23 20:13:38.352] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:13:38.368] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:13:38.560] Loaded PowerVR consumer services. [2025-09-23 20:13:38.600] 512+0 records in [2025-09-23 20:13:38.600] 512+0 records out [2025-09-23 20:13:38.600] Waiting data available... [2025-09-23 20:13:38.632] Starting syslogd/klogd: done [2025-09-23 20:13:38.648] DML Start [2025-09-23 20:13:38.808] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:13:39.016] DML res1: 0 [2025-09-23 20:13:39.523] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:13:39.523] Read Success [2025-09-23 20:13:39.523] Verifying certificate... [2025-09-23 20:13:39.763] Verified OK [2025-09-23 20:13:39.780] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:13:41.464] Verified OK [2025-09-23 20:13:41.464] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:13:42.072] Verified OK [2025-09-23 20:13:42.072] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:13:44.663] fs.protected_hardlinks = 1 [2025-09-23 20:13:44.679] fs.protected_symlinks = 1 [2025-09-23 20:13:44.679] kernel.modules_disabled = 1 [2025-09-23 20:13:44.870] [2025-09-23 20:13:44.870] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:13:46.160] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:13:53.855] SBL1:1210.0.1.0 [2025-09-23 20:13:53.903] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:13:55.486] SBL2:1210.0.1.0 [2025-09-23 20:13:55.518] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:13:55.614] j-A [2025-09-23 20:14:02.970] The R5 Autosar Classic is running [2025-09-23 20:14:02.992] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:14:02.992] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:14:03.600] INIT: version 2.96 booting [2025-09-23 20:14:03.712] INIT: Entering runlevel: 5 [2025-09-23 20:14:03.872] mtd32 attached [2025-09-23 20:14:03.872] mtd24 attached [2025-09-23 20:14:03.888] mtd28 attached [2025-09-23 20:14:03.920] ubi0:dml_code is mounted. [2025-09-23 20:14:03.970] RTNETLINK answers: File exists [2025-09-23 20:14:03.970] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:14:03.970] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:14:03.970] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:14:03.970] ubi2:animations is mounted. [2025-09-23 20:14:03.970] ubi1:textures is mounted. [2025-09-23 20:14:03.970] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:14:03.970] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:14:03.986] data.LB_FadeInType0=100 [2025-09-23 20:14:03.986] data.CHLH_FadeInType0=0 [2025-09-23 20:14:03.986] data.WU_FadeInDelay=0 [2025-09-23 20:14:04.007] max_time_out=0 [2025-09-23 20:14:04.007] No splash screen [2025-09-23 20:14:04.007] stop dss Done [2025-09-23 20:14:04.023] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:14:04.039] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:14:04.077] /dev/mem opened. [2025-09-23 20:14:04.077] Memory mapped at address 0xffffb8b08000. [2025-09-23 20:14:04.077] Read at address 0x00600018 (0xffffb8b08018): 0x00000000 [2025-09-23 20:14:04.077] Write at address 0x00600018 (0xffffb8b08018): 0x00400040, readback 0x00400040 [2025-09-23 20:14:04.253] Loaded PowerVR consumer services. [2025-09-23 20:14:04.301] Waiting data available... [2025-09-23 20:14:04.301] 512+0 records in [2025-09-23 20:14:04.317] 512+0 records out [2025-09-23 20:14:04.333] Starting syslogd/klogd: done [2025-09-23 20:14:04.349] DML Start [2025-09-23 20:14:04.541] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:14:04.765] DML res1: 0 [2025-09-23 20:14:05.181] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:14:05.202] Read Success [2025-09-23 20:14:05.202] Verifying certificate... [2025-09-23 20:14:05.458] Verified OK [2025-09-23 20:14:05.473] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:14:07.221] Verified OK [2025-09-23 20:14:07.221] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:14:07.808] Verified OK [2025-09-23 20:14:07.808] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:14:10.303] fs.protected_hardlinks = 1 [2025-09-23 20:14:10.319] fs.protected_symlinks = 1 [2025-09-23 20:14:10.319] kernel.modules_disabled = 1 [2025-09-23 20:14:10.526] [2025-09-23 20:14:10.526] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:14:11.863] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:14:19.597] SBL1:1210.0.1.0 [2025-09-23 20:14:19.646] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 20:14:21.213] SBL2:1210.0.1.0 [2025-09-23 20:14:21.245] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:14:21.356] j-A [2025-09-23 20:14:28.711] The R5 Autosar Classic is running [2025-09-23 20:14:28.711] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:14:28.732] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:14:29.339] INIT: version 2.96 booting [2025-09-23 20:14:29.452] INIT: Entering runlevel: 5 [2025-09-23 20:14:29.595] mtd24 attached [2025-09-23 20:14:29.611] mtd28 attached [2025-09-23 20:14:29.628] mtd32 attached [2025-09-23 20:14:29.676] ubi0:textures is mounted. [2025-09-23 20:14:29.676] RTNETLINK answers: File exists [2025-09-23 20:14:29.740] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:14:29.740] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:14:29.740] ubi2:dml_code is mounted. [2025-09-23 20:14:29.740] ubi1:animations is mounted. [2025-09-23 20:14:29.740] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:14:29.740] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:14:29.740] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:14:29.740] data.LB_FadeInType0=100 [2025-09-23 20:14:29.740] data.CHLH_FadeInType0=0 [2025-09-23 20:14:29.740] data.WU_FadeInDelay=0 [2025-09-23 20:14:29.740] max_time_out=0 [2025-09-23 20:14:29.740] No splash screen [2025-09-23 20:14:29.740] stop dss Done [2025-09-23 20:14:29.816] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:14:29.816] /dev/mem opened. [2025-09-23 20:14:29.816] Memory mapped at address 0xffff812f4000. [2025-09-23 20:14:29.816] Read at address 0x00600018 (0xffff812f4018): 0x00000000 [2025-09-23 20:14:29.816] Write at address 0x00600018 (0xffff812f4018): 0x00400040, readback 0x00400040 [2025-09-23 20:14:29.816] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:14:30.024] Loaded PowerVR consumer services. [2025-09-23 20:14:30.040] 512+0 records in [2025-09-23 20:14:30.040] 512+0 records out [2025-09-23 20:14:30.072] Waiting data available... [2025-09-23 20:14:30.088] Starting syslogd/klogd: done [2025-09-23 20:14:30.104] DML Start [2025-09-23 20:14:30.296] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:14:30.552] DML res1: 0 [2025-09-23 20:14:30.944] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:14:30.944] Read Success [2025-09-23 20:14:30.944] Verifying certificate... [2025-09-23 20:14:31.184] Verified OK [2025-09-23 20:14:31.200] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:14:32.839] Verified OK [2025-09-23 20:14:32.839] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:14:33.501] Verified OK [2025-09-23 20:14:33.501] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:14:36.154] fs.protected_hardlinks = 1 [2025-09-23 20:14:36.154] fs.protected_symlinks = 1 [2025-09-23 20:14:36.154] kernel.modules_disabled = 1 [2025-09-23 20:14:36.346] [2025-09-23 20:14:36.346] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:14:37.649] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:14:45.325] SBL1:1210.0.1.0 [2025-09-23 20:14:45.357] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:14:46.940] SBL2:1210.0.1.0 [2025-09-23 20:14:46.972] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:14:47.084] j-A [2025-09-23 20:14:54.454] The R5 Autosar Classic is running [2025-09-23 20:14:54.454] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:14:54.454] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:14:55.061] INIT: version 2.96 booting [2025-09-23 20:14:55.173] INIT: Entering runlevel: 5 [2025-09-23 20:14:55.317] mtd24 attached [2025-09-23 20:14:55.333] mtd28 attached [2025-09-23 20:14:55.365] ubi0:textures is mounted. [2025-09-23 20:14:55.381] mtd32 attached [2025-09-23 20:14:55.381] ubi1:animations is mounted. [2025-09-23 20:14:55.397] RTNETLINK answers: File exists [2025-09-23 20:14:55.460] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:14:55.460] ubi2:dml_code is mounted. [2025-09-23 20:14:55.460] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:14:55.460] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:14:55.460] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:14:55.460] data.LB_FadeInType0=100 [2025-09-23 20:14:55.460] data.CHLH_FadeInType0=0 [2025-09-23 20:14:55.460] data.WU_FadeInDelay=0 [2025-09-23 20:14:55.460] max_time_out=0 [2025-09-23 20:14:55.460] No splash screen [2025-09-23 20:14:55.460] stop dss Done [2025-09-23 20:14:55.460] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:14:55.509] /dev/mem opened. [2025-09-23 20:14:55.509] Memory mapped at address 0xffff8af9e000. [2025-09-23 20:14:55.534] Read at address 0x00600018 (0xffff8af9e018): 0x00000000 [2025-09-23 20:14:55.534] Write at address 0x00600018 (0xffff8af9e018): 0x00400040, readback 0x00400040 [2025-09-23 20:14:55.550] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:14:55.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:14:55.742] Loaded PowerVR consumer services. [2025-09-23 20:14:55.774] 512+0 records in [2025-09-23 20:14:55.774] 512+0 records out [2025-09-23 20:14:55.789] Waiting data available... [2025-09-23 20:14:55.821] Starting syslogd/klogd: done [2025-09-23 20:14:55.837] DML Start [2025-09-23 20:14:56.046] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:14:56.269] DML res1: 0 [2025-09-23 20:14:56.665] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:14:56.665] Read Success [2025-09-23 20:14:56.665] Verifying certificate... [2025-09-23 20:14:56.888] Verified OK [2025-09-23 20:14:56.904] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:14:58.583] Verified OK [2025-09-23 20:14:58.604] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:14:59.177] Verified OK [2025-09-23 20:14:59.177] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:15:01.687] fs.protected_hardlinks = 1 [2025-09-23 20:15:01.703] fs.protected_symlinks = 1 [2025-09-23 20:15:01.703] kernel.modules_disabled = 1 [2025-09-23 20:15:01.895] [2025-09-23 20:15:01.895] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:15:03.348] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:15:11.045] SBL1:1210.0.1.0 [2025-09-23 20:15:11.077] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:15:12.658] SBL2:1210.0.1.0 [2025-09-23 20:15:12.690] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:15:12.787] j-A [2025-09-23 20:15:20.141] The R5 Autosar Classic is running [2025-09-23 20:15:20.166] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:15:20.166] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:15:20.773] INIT: version 2.96 booting [2025-09-23 20:15:20.885] INIT: Entering runlevel: 5 [2025-09-23 20:15:21.029] mtd24 attached [2025-09-23 20:15:21.045] mtd28 attached [2025-09-23 20:15:21.061] mtd32 attached [2025-09-23 20:15:21.117] ubi0:textures is mounted. [2025-09-23 20:15:21.117] RTNETLINK answers: File exists [2025-09-23 20:15:21.117] ubi1:animations is mounted. [2025-09-23 20:15:21.117] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:15:21.166] ubi2:dml_code is mounted. [2025-09-23 20:15:21.166] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:15:21.166] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:15:21.166] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:15:21.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:15:21.166] data.LB_FadeInType0=100 [2025-09-23 20:15:21.166] data.CHLH_FadeInType0=0 [2025-09-23 20:15:21.166] data.WU_FadeInDelay=0 [2025-09-23 20:15:21.166] max_time_out=0 [2025-09-23 20:15:21.166] No splash screen [2025-09-23 20:15:21.166] stop dss Done [2025-09-23 20:15:21.197] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:15:21.240] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:15:21.240] /dev/mem opened. [2025-09-23 20:15:21.240] Memory mapped at address 0xffffb2c22000. [2025-09-23 20:15:21.240] Read at address 0x00600018 (0xffffb2c22018): 0x00000000 [2025-09-23 20:15:21.240] Write at address 0x00600018 (0xffffb2c22018): 0x00400040, readback 0x00400040 [2025-09-23 20:15:21.320] Loaded PowerVR consumer services. [2025-09-23 20:15:21.464] 512+0 records in [2025-09-23 20:15:21.464] 512+0 records out [2025-09-23 20:15:21.480] Waiting data available... [2025-09-23 20:15:21.528] Starting syslogd/klogd: done [2025-09-23 20:15:21.544] DML Start [2025-09-23 20:15:21.735] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:15:21.959] DML res1: 0 [2025-09-23 20:15:22.434] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:15:22.434] Read Success [2025-09-23 20:15:22.434] Verifying certificate... [2025-09-23 20:15:22.674] Verified OK [2025-09-23 20:15:22.690] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:15:24.335] Verified OK [2025-09-23 20:15:24.335] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:15:24.933] Verified OK [2025-09-23 20:15:24.933] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:15:27.508] fs.protected_hardlinks = 1 [2025-09-23 20:15:27.508] fs.protected_symlinks = 1 [2025-09-23 20:15:27.524] kernel.modules_disabled = 1 [2025-09-23 20:15:27.715] [2025-09-23 20:15:27.715] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:15:29.067] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:15:36.770] SBL1:1210.0.1.0 [2025-09-23 20:15:36.818] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:15:38.385] SBL2:1210.0.1.0 [2025-09-23 20:15:38.417] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:15:38.529] j-A [2025-09-23 20:15:45.902] The R5 Autosar Classic is running [2025-09-23 20:15:45.902] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:15:45.902] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:15:46.509] INIT: version 2.96 booting [2025-09-23 20:15:46.622] INIT: Entering runlevel: 5 [2025-09-23 20:15:46.782] mtd28 attached [2025-09-23 20:15:46.782] mtd24 attached [2025-09-23 20:15:46.814] ubi0:animations is mounted. [2025-09-23 20:15:46.830] ubi1:textures is mounted. [2025-09-23 20:15:46.830] mtd32 attached [2025-09-23 20:15:46.846] RTNETLINK answers: File exists [2025-09-23 20:15:46.885] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:15:46.885] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:15:46.885] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:15:46.885] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:15:46.885] ubi2:dml_code is mounted. [2025-09-23 20:15:46.885] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:15:46.916] data.LB_FadeInType0=100 [2025-09-23 20:15:46.916] data.CHLH_FadeInType0=0 [2025-09-23 20:15:46.916] data.WU_FadeInDelay=0 [2025-09-23 20:15:46.916] max_time_out=0 [2025-09-23 20:15:46.916] No splash screen [2025-09-23 20:15:46.916] stop dss Done [2025-09-23 20:15:46.947] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:15:46.947] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:15:47.000] /dev/mem opened. [2025-09-23 20:15:47.000] Memory mapped at address 0xffffb36b4000. [2025-09-23 20:15:47.000] Read at address 0x00600018 (0xffffb36b4018): 0x00000000 [2025-09-23 20:15:47.000] Write at address 0x00600018 (0xffffb36b4018): 0x00400040, readback 0x00400040 [2025-09-23 20:15:47.161] Loaded PowerVR consumer services. [2025-09-23 20:15:47.209] 512+0 records in [2025-09-23 20:15:47.209] 512+0 records out [2025-09-23 20:15:47.224] Waiting data available... [2025-09-23 20:15:47.240] Starting syslogd/klogd: done [2025-09-23 20:15:47.256] DML Start [2025-09-23 20:15:47.432] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:15:47.672] DML res1: 0 [2025-09-23 20:15:48.055] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:15:48.077] Read Success [2025-09-23 20:15:48.077] Verifying certificate... [2025-09-23 20:15:48.316] Verified OK [2025-09-23 20:15:48.332] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:15:49.962] Verified OK [2025-09-23 20:15:49.962] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:15:50.480] Verified OK [2025-09-23 20:15:50.480] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:15:53.261] fs.protected_hardlinks = 1 [2025-09-23 20:15:53.277] fs.protected_symlinks = 1 [2025-09-23 20:15:53.277] kernel.modules_disabled = 1 [2025-09-23 20:15:53.470] [2025-09-23 20:15:53.470] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:15:54.786] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:16:02.523] SBL1:1210.0.1.0 [2025-09-23 20:16:02.571] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:16:04.137] SBL2:1210.0.1.0 [2025-09-23 20:16:04.169] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:16:04.281] j-A [2025-09-23 20:16:11.656] The R5 Autosar Classic is running [2025-09-23 20:16:11.656] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:16:11.656] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:16:12.263] INIT: version 2.96 booting [2025-09-23 20:16:12.375] INIT: Entering runlevel: 5 [2025-09-23 20:16:12.519] mtd24 attached [2025-09-23 20:16:12.535] mtd28 attached [2025-09-23 20:16:12.551] mtd32 attached [2025-09-23 20:16:12.634] RTNETLINK answers: File exists [2025-09-23 20:16:12.634] ubi0:textures is mounted. [2025-09-23 20:16:12.634] ubi1:animations is mounted. [2025-09-23 20:16:12.634] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:16:12.634] ubi2:dml_code is mounted. [2025-09-23 20:16:12.634] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:16:12.634] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:16:12.634] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:16:12.634] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:16:12.660] data.LB_FadeInType0=100 [2025-09-23 20:16:12.660] data.CHLH_FadeInType0=0 [2025-09-23 20:16:12.660] data.WU_FadeInDelay=0 [2025-09-23 20:16:12.660] max_time_out=0 [2025-09-23 20:16:12.660] No splash screen [2025-09-23 20:16:12.660] stop dss Done [2025-09-23 20:16:12.692] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:16:12.733] /dev/mem opened. [2025-09-23 20:16:12.733] Memory mapped at address 0xffffa7644000. [2025-09-23 20:16:12.733] Read at address 0x00600018 (0xffffa7644018): 0x00000000 [2025-09-23 20:16:12.733] Write at address 0x00600018 (0xffffa7644018): 0x00400040, readback 0x00400040 [2025-09-23 20:16:12.733] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:16:12.925] Loaded PowerVR consumer services. [2025-09-23 20:16:12.957] 512+0 records in [2025-09-23 20:16:12.957] 512+0 records out [2025-09-23 20:16:12.973] Waiting data available... [2025-09-23 20:16:12.989] Starting syslogd/klogd: done [2025-09-23 20:16:13.005] DML Start [2025-09-23 20:16:13.180] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:16:13.404] DML res1: 0 [2025-09-23 20:16:13.862] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:16:13.862] Read Success [2025-09-23 20:16:13.862] Verifying certificate... [2025-09-23 20:16:14.101] Verified OK [2025-09-23 20:16:14.117] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:16:15.761] Verified OK [2025-09-23 20:16:15.761] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:16:16.369] Verified OK [2025-09-23 20:16:16.369] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:16:19.151] fs.protected_hardlinks = 1 [2025-09-23 20:16:19.167] fs.protected_symlinks = 1 [2025-09-23 20:16:19.183] kernel.modules_disabled = 1 [2025-09-23 20:16:19.375] [2025-09-23 20:16:19.375] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:16:20.500] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:16:28.256] SBL1:1210.0.1.0 [2025-09-23 20:16:28.304] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:16:29.871] SBL2:1210.0.1.0 [2025-09-23 20:16:29.903] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:16:30.015] j-A [2025-09-23 20:16:37.386] The R5 Autosar Classic is running [2025-09-23 20:16:37.386] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:16:37.386] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:16:37.994] INIT: version 2.96 booting [2025-09-23 20:16:38.106] INIT: Entering runlevel: 5 [2025-09-23 20:16:38.265] mtd24 attached [2025-09-23 20:16:38.281] mtd32 attached [2025-09-23 20:16:38.297] mtd28 attached [2025-09-23 20:16:38.297] ubi0:textures is mounted. [2025-09-23 20:16:38.329] ubi1:dml_code is mounted. [2025-09-23 20:16:38.398] RTNETLINK answers: File exists [2025-09-23 20:16:38.398] ubi2:animations is mounted. [2025-09-23 20:16:38.398] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:16:38.398] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:16:38.398] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:16:38.398] data.LB_FadeInType0=100 [2025-09-23 20:16:38.398] data.CHLH_FadeInType0=0 [2025-09-23 20:16:38.398] data.WU_FadeInDelay=0 [2025-09-23 20:16:38.398] max_time_out=0 [2025-09-23 20:16:38.398] No splash screen [2025-09-23 20:16:38.398] stop dss Done [2025-09-23 20:16:38.398] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:16:38.398] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:16:38.470] /dev/mem opened. [2025-09-23 20:16:38.470] Memory mapped at address 0xffffbb22b000. [2025-09-23 20:16:38.470] Read at address 0x00600018 (0xffffbb22b018): 0x00000000 [2025-09-23 20:16:38.470] Write at address 0x00600018 (0xffffbb22b018): 0x00400040, readback 0x00400040 [2025-09-23 20:16:38.470] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:16:38.470] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:16:38.567] Loaded PowerVR consumer services. [2025-09-23 20:16:38.679] 512+0 records in [2025-09-23 20:16:38.679] 512+0 records out [2025-09-23 20:16:38.710] Waiting data available... [2025-09-23 20:16:38.710] Starting syslogd/klogd: done [2025-09-23 20:16:38.742] DML Start [2025-09-23 20:16:38.934] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:16:39.142] DML res1: 0 [2025-09-23 20:16:39.590] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:16:39.611] Read Success [2025-09-23 20:16:39.611] Verifying certificate... [2025-09-23 20:16:39.882] Verified OK [2025-09-23 20:16:39.898] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:16:41.584] Verified OK [2025-09-23 20:16:41.584] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:16:42.221] Verified OK [2025-09-23 20:16:42.221] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:16:44.888] fs.protected_hardlinks = 1 [2025-09-23 20:16:44.888] fs.protected_symlinks = 1 [2025-09-23 20:16:44.888] kernel.modules_disabled = 1 [2025-09-23 20:16:45.080] [2025-09-23 20:16:45.080] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:16:46.256] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:16:53.986] SBL1:1210.0.1.0 [2025-09-23 20:16:54.034] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:16:55.601] SBL2:1210.0.1.0 [2025-09-23 20:16:55.633] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:16:55.745] j-A [2025-09-23 20:17:03.119] The R5 Autosar Classic is running [2025-09-23 20:17:03.119] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:17:03.119] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:17:03.727] INIT: version 2.96 booting [2025-09-23 20:17:03.839] INIT: Entering runlevel: 5 [2025-09-23 20:17:03.983] mtd32 attached [2025-09-23 20:17:03.999] mtd24 attached [2025-09-23 20:17:04.015] mtd28 attached [2025-09-23 20:17:04.047] ubi0:dml_code is mounted. [2025-09-23 20:17:04.063] RTNETLINK answers: File exists [2025-09-23 20:17:04.063] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:17:04.118] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:17:04.118] ubi2:animations is mounted. [2025-09-23 20:17:04.118] ubi1:textures is mounted. [2025-09-23 20:17:04.118] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:17:04.118] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:17:04.118] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:17:04.118] data.LB_FadeInType0=100 [2025-09-23 20:17:04.118] data.CHLH_FadeInType0=0 [2025-09-23 20:17:04.118] data.WU_FadeInDelay=0 [2025-09-23 20:17:04.118] max_time_out=0 [2025-09-23 20:17:04.118] No splash screen [2025-09-23 20:17:04.118] stop dss Done [2025-09-23 20:17:04.174] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:17:04.174] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:17:04.174] /dev/mem opened. [2025-09-23 20:17:04.201] Memory mapped at address 0xffffa2fdd000. [2025-09-23 20:17:04.201] Read at address 0x00600018 (0xffffa2fdd018): 0x00000000 [2025-09-23 20:17:04.201] Write at address 0x00600018 (0xffffa2fdd018): 0x00400040, readback 0x00400040 [2025-09-23 20:17:04.313] Loaded PowerVR consumer services. [2025-09-23 20:17:04.435] 512+0 records in [2025-09-23 20:17:04.435] 512+0 records out [2025-09-23 20:17:04.435] Waiting data available... [2025-09-23 20:17:04.467] Starting syslogd/klogd: done [2025-09-23 20:17:04.483] DML Start [2025-09-23 20:17:04.675] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:17:04.883] DML res1: 0 [2025-09-23 20:17:05.344] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:17:05.344] Read Success [2025-09-23 20:17:05.344] Verifying certificate... [2025-09-23 20:17:05.583] Verified OK [2025-09-23 20:17:05.599] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:17:07.182] Verified OK [2025-09-23 20:17:07.182] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:17:07.847] Verified OK [2025-09-23 20:17:07.847] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:17:10.517] fs.protected_hardlinks = 1 [2025-09-23 20:17:10.548] fs.protected_symlinks = 1 [2025-09-23 20:17:10.548] kernel.modules_disabled = 1 [2025-09-23 20:17:10.740] [2025-09-23 20:17:10.740] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:17:11.984] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:17:19.728] SBL1:1210.0.1.0 [2025-09-23 20:17:19.776] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:17:21.343] SBL2:1210.0.1.0 [2025-09-23 20:17:21.375] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:17:21.487] j-A [2025-09-23 20:17:28.862] The R5 Autosar Classic is running [2025-09-23 20:17:28.862] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:17:28.862] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:17:29.469] INIT: version 2.96 booting [2025-09-23 20:17:29.582] INIT: Entering runlevel: 5 [2025-09-23 20:17:29.725] mtd24 attached [2025-09-23 20:17:29.741] mtd28 attached [2025-09-23 20:17:29.757] mtd32 attached [2025-09-23 20:17:29.806] RTNETLINK answers: File exists [2025-09-23 20:17:29.866] ubi2:dml_code is mounted. [2025-09-23 20:17:29.866] ubi0:textures is mounted. [2025-09-23 20:17:29.866] ubi1:animations is mounted. [2025-09-23 20:17:29.866] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:17:29.866] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:17:29.866] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:17:29.866] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:17:29.866] data.LB_FadeInType0=100 [2025-09-23 20:17:29.866] data.CHLH_FadeInType0=0 [2025-09-23 20:17:29.866] data.WU_FadeInDelay=0 [2025-09-23 20:17:29.866] max_time_out=0 [2025-09-23 20:17:29.866] No splash screen [2025-09-23 20:17:29.866] stop dss Done [2025-09-23 20:17:29.866] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:17:29.935] /dev/mem opened. [2025-09-23 20:17:29.935] Memory mapped at address 0xffff92a28000. [2025-09-23 20:17:29.935] Read at address 0x00600018 (0xffff92a28018): 0x00000000 [2025-09-23 20:17:29.935] Write at address 0x00600018 (0xffff92a28018): 0x00400040, readback 0x00400040 [2025-09-23 20:17:29.951] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:17:29.967] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:17:30.128] Loaded PowerVR consumer services. [2025-09-23 20:17:30.159] 512+0 records in [2025-09-23 20:17:30.159] 512+0 records out [2025-09-23 20:17:30.207] Starting syslogd/klogd: done [2025-09-23 20:17:30.239] Waiting data available... [2025-09-23 20:17:30.239] DML Start [2025-09-23 20:17:30.447] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:17:30.655] DML res1: 0 [2025-09-23 20:17:31.077] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:17:31.077] Read Success [2025-09-23 20:17:31.077] Verifying certificate... [2025-09-23 20:17:31.365] Verified OK [2025-09-23 20:17:31.380] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:17:33.006] Verified OK [2025-09-23 20:17:33.006] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:17:33.660] Verified OK [2025-09-23 20:17:33.660] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:17:36.346] fs.protected_hardlinks = 1 [2025-09-23 20:17:36.362] fs.protected_symlinks = 1 [2025-09-23 20:17:36.362] kernel.modules_disabled = 1 [2025-09-23 20:17:36.553] [2025-09-23 20:17:36.553] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:17:37.706] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:17:45.456] SBL1:1210.0.1.0 [2025-09-23 20:17:45.504] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:17:47.071] SBL2:1210.0.1.0 [2025-09-23 20:17:47.104] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:17:47.216] j-A [2025-09-23 20:17:54.588] The R5 Autosar Classic is running [2025-09-23 20:17:54.588] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:17:54.588] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:17:55.196] INIT: version 2.96 booting [2025-09-23 20:17:55.307] INIT: Entering runlevel: 5 [2025-09-23 20:17:55.452] mtd24 attached [2025-09-23 20:17:55.468] mtd28 attached [2025-09-23 20:17:55.484] mtd32 attached [2025-09-23 20:17:55.516] ubi0:textures is mounted. [2025-09-23 20:17:55.532] RTNETLINK answers: File exists [2025-09-23 20:17:55.532] ubi2:dml_code is mounted. [2025-09-23 20:17:55.569] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:17:55.569] ubi1:animations is mounted. [2025-09-23 20:17:55.569] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:17:55.569] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:17:55.569] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:17:55.569] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:17:55.595] data.LB_FadeInType0=100 [2025-09-23 20:17:55.595] data.CHLH_FadeInType0=0 [2025-09-23 20:17:55.595] data.WU_FadeInDelay=0 [2025-09-23 20:17:55.595] max_time_out=0 [2025-09-23 20:17:55.595] No splash screen [2025-09-23 20:17:55.595] stop dss Done [2025-09-23 20:17:55.626] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:17:55.642] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:17:55.677] /dev/mem opened. [2025-09-23 20:17:55.677] Memory mapped at address 0xffff8a0d6000. [2025-09-23 20:17:55.677] Read at address 0x00600018 (0xffff8a0d6018): 0x00000000 [2025-09-23 20:17:55.677] Write at address 0x00600018 (0xffff8a0d6018): 0x00400040, readback 0x00400040 [2025-09-23 20:17:55.790] Loaded PowerVR consumer services. [2025-09-23 20:17:55.870] 512+0 records in [2025-09-23 20:17:55.870] 512+0 records out [2025-09-23 20:17:55.917] Starting syslogd/klogd: Waiting data available... [2025-09-23 20:17:55.933] done [2025-09-23 20:17:55.949] DML Start [2025-09-23 20:17:56.125] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:17:56.364] DML res1: 0 [2025-09-23 20:17:56.809] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:17:56.809] Read Success [2025-09-23 20:17:56.809] Verifying certificate... [2025-09-23 20:17:57.080] Verified OK [2025-09-23 20:17:57.113] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:17:58.887] Verified OK [2025-09-23 20:17:58.887] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:17:59.410] Verified OK [2025-09-23 20:17:59.410] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:18:01.792] fs.protected_hardlinks = 1 [2025-09-23 20:18:01.808] fs.protected_symlinks = 1 [2025-09-23 20:18:01.808] kernel.modules_disabled = 1 [2025-09-23 20:18:02.016] [2025-09-23 20:18:02.016] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:18:03.431] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:18:11.188] SBL1:1210.0.1.0 [2025-09-23 20:18:11.236] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:18:12.802] SBL2:1210.0.1.0 [2025-09-23 20:18:12.834] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:18:12.946] j-A [2025-09-23 20:18:20.321] The R5 Autosar Classic is running [2025-09-23 20:18:20.321] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:18:20.321] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:18:20.928] INIT: version 2.96 booting [2025-09-23 20:18:21.040] INIT: Entering runlevel: 5 [2025-09-23 20:18:21.200] mtd24 attached [2025-09-23 20:18:21.200] mtd28 attached [2025-09-23 20:18:21.216] mtd32 attached [2025-09-23 20:18:21.264] ubi0:textures is mounted. [2025-09-23 20:18:21.264] RTNETLINK answers: File exists [2025-09-23 20:18:21.302] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:18:21.302] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:18:21.302] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:18:21.302] ubi1:animations is mounted. [2025-09-23 20:18:21.302] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:18:21.302] ubi2:dml_code is mounted. [2025-09-23 20:18:21.302] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:18:21.332] data.LB_FadeInType0=100 [2025-09-23 20:18:21.332] data.CHLH_FadeInType0=0 [2025-09-23 20:18:21.332] data.WU_FadeInDelay=0 [2025-09-23 20:18:21.332] max_time_out=0 [2025-09-23 20:18:21.332] No splash screen [2025-09-23 20:18:21.332] stop dss Done [2025-09-23 20:18:21.374] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:18:21.374] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:18:21.390] /dev/mem opened. [2025-09-23 20:18:21.390] Memory mapped at address 0xffff95775000. [2025-09-23 20:18:21.416] Read at address 0x00600018 (0xffff95775018): 0x00000000 [2025-09-23 20:18:21.416] Write at address 0x00600018 (0xffff95775018): 0x00400040, readback 0x00400040 [2025-09-23 20:18:21.496] Loaded PowerVR consumer services. [2025-09-23 20:18:21.645] 512+0 records in [2025-09-23 20:18:21.645] 512+0 records out [2025-09-23 20:18:21.645] Waiting data available... [2025-09-23 20:18:21.677] Starting syslogd/klogd: done [2025-09-23 20:18:21.709] DML Start [2025-09-23 20:18:21.884] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:18:22.124] DML res1: 0 [2025-09-23 20:18:22.531] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:18:22.531] Read Success [2025-09-23 20:18:22.531] Verifying certificate... [2025-09-23 20:18:22.787] Verified OK [2025-09-23 20:18:22.802] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:18:24.578] Verified OK [2025-09-23 20:18:24.578] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:18:25.122] Verified OK [2025-09-23 20:18:25.138] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:18:27.631] fs.protected_hardlinks = 1 [2025-09-23 20:18:27.647] fs.protected_symlinks = 1 [2025-09-23 20:18:27.647] kernel.modules_disabled = 1 [2025-09-23 20:18:27.840] [2025-09-23 20:18:27.840] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:18:29.199] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:18:36.930] SBL1:1210.0.1.0 [2025-09-23 20:18:36.962] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:18:38.545] SBL2:1210.0.1.0 [2025-09-23 20:18:38.577] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 20:18:38.689] j-A [2025-09-23 20:18:46.027] The R5 Autosar Classic is running [2025-09-23 20:18:46.052] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:18:46.052] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:18:46.660] INIT: version 2.96 booting [2025-09-23 20:18:46.772] INIT: Entering runlevel: 5 [2025-09-23 20:18:46.932] mtd24 attached [2025-09-23 20:18:46.948] mtd32 attached [2025-09-23 20:18:46.964] mtd28 attached [2025-09-23 20:18:46.980] ubi0:textures is mounted. [2025-09-23 20:18:47.012] RTNETLINK answers: File exists [2025-09-23 20:18:47.012] ubi2:animations is mounted. [2025-09-23 20:18:47.059] ubi1:dml_code is mounted. [2025-09-23 20:18:47.059] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:18:47.059] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:18:47.059] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:18:47.059] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:18:47.059] data.LB_FadeInType0=100 [2025-09-23 20:18:47.059] data.CHLH_FadeInType0=0 [2025-09-23 20:18:47.059] data.WU_FadeInDelay=0 [2025-09-23 20:18:47.059] max_time_out=0 [2025-09-23 20:18:47.059] No splash screen [2025-09-23 20:18:47.059] stop dss Done [2025-09-23 20:18:47.059] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:18:47.091] /dev/mem opened. [2025-09-23 20:18:47.128] Memory mapped at address 0xffff870f8000. [2025-09-23 20:18:47.128] Read at address 0x00600018 (0xffff870f8018): 0x00000000 [2025-09-23 20:18:47.128] Write at address 0x00600018 (0xffff870f8018): 0x00400040, readback 0x00400040 [2025-09-23 20:18:47.128] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:18:47.128] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:18:47.351] Loaded PowerVR consumer services. [2025-09-23 20:18:47.393] Waiting data available... [2025-09-23 20:18:47.393] 512+0 records in [2025-09-23 20:18:47.393] 512+0 records out [2025-09-23 20:18:47.441] Starting syslogd/klogd: done [2025-09-23 20:18:47.457] DML Start [2025-09-23 20:18:47.632] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:18:47.872] DML res1: 0 [2025-09-23 20:18:48.311] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:18:48.311] Read Success [2025-09-23 20:18:48.311] Verifying certificate... [2025-09-23 20:18:48.535] Verified OK [2025-09-23 20:18:48.551] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:18:50.275] Verified OK [2025-09-23 20:18:50.275] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:18:50.825] Verified OK [2025-09-23 20:18:50.825] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:18:53.304] fs.protected_hardlinks = 1 [2025-09-23 20:18:53.320] fs.protected_symlinks = 1 [2025-09-23 20:18:53.320] kernel.modules_disabled = 1 [2025-09-23 20:18:53.511] [2025-09-23 20:18:53.511] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:18:54.992] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:19:02.660] SBL1:1210.0.1.0 [2025-09-23 20:19:02.691] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:19:04.275] SBL2:1210.0.1.0 [2025-09-23 20:19:04.307] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:19:04.418] j-A [2025-09-23 20:19:11.790] The R5 Autosar Classic is running [2025-09-23 20:19:11.790] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:19:11.790] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:19:12.397] INIT: version 2.96 booting [2025-09-23 20:19:12.509] INIT: Entering runlevel: 5 [2025-09-23 20:19:12.669] mtd32 attached [2025-09-23 20:19:12.685] mtd28 attached [2025-09-23 20:19:12.685] mtd24 attached [2025-09-23 20:19:12.788] ubi0:dml_code is mounted. [2025-09-23 20:19:12.788] RTNETLINK answers: File exists [2025-09-23 20:19:12.788] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:19:12.788] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:19:12.788] ubi1:animations is mounted. [2025-09-23 20:19:12.788] ubi2:textures is mounted. [2025-09-23 20:19:12.788] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:19:12.788] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:19:12.788] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:19:12.788] data.LB_FadeInType0=100 [2025-09-23 20:19:12.788] data.CHLH_FadeInType0=0 [2025-09-23 20:19:12.788] data.WU_FadeInDelay=0 [2025-09-23 20:19:12.788] max_time_out=0 [2025-09-23 20:19:12.788] No splash screen [2025-09-23 20:19:12.788] stop dss Done [2025-09-23 20:19:12.804] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:19:12.820] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:19:12.836] /dev/mem opened. [2025-09-23 20:19:12.836] Memory mapped at address 0xffff87498000. [2025-09-23 20:19:12.863] Read at address 0x00600018 (0xffff87498018): 0x00000000 [2025-09-23 20:19:12.863] Write at address 0x00600018 (0xffff87498018): 0x00400040, readback 0x00400040 [2025-09-23 20:19:13.071] Loaded PowerVR consumer services. [2025-09-23 20:19:13.086] 512+0 records in [2025-09-23 20:19:13.103] 512+0 records out [2025-09-23 20:19:13.103] Waiting data available... [2025-09-23 20:19:13.118] Starting syslogd/klogd: done [2025-09-23 20:19:13.150] DML Start [2025-09-23 20:19:13.343] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:19:13.551] DML res1: 0 [2025-09-23 20:19:13.947] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:19:13.947] Read Success [2025-09-23 20:19:13.947] Verifying certificate... [2025-09-23 20:19:14.171] Verified OK [2025-09-23 20:19:14.187] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:19:15.770] Verified OK [2025-09-23 20:19:15.770] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:19:16.362] Verified OK [2025-09-23 20:19:16.383] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:19:19.164] fs.protected_hardlinks = 1 [2025-09-23 20:19:19.164] fs.protected_symlinks = 1 [2025-09-23 20:19:19.164] kernel.modules_disabled = 1 [2025-09-23 20:19:19.356] [2025-09-23 20:19:19.356] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:19:20.635] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:19:28.418] SBL1:1210.0.1.0 [2025-09-23 20:19:28.450] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:19:30.032] SBL2:1210.0.1.0 [2025-09-23 20:19:30.064] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:19:30.176] j-A [2025-09-23 20:19:37.547] The R5 Autosar Classic is running [2025-09-23 20:19:37.547] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:19:37.547] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:19:38.154] INIT: version 2.96 booting [2025-09-23 20:19:38.267] INIT: Entering runlevel: 5 [2025-09-23 20:19:38.425] mtd24 attached [2025-09-23 20:19:38.441] mtd32 attached [2025-09-23 20:19:38.441] mtd28 attached [2025-09-23 20:19:38.489] ubi0:textures is mounted. [2025-09-23 20:19:38.505] ubi1:dml_code is mounted. [2025-09-23 20:19:38.505] RTNETLINK answers: File exists [2025-09-23 20:19:38.561] ubi2:animations is mounted. [2025-09-23 20:19:38.561] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:19:38.561] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:19:38.561] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:19:38.561] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:19:38.561] data.LB_FadeInType0=100 [2025-09-23 20:19:38.561] data.CHLH_FadeInType0=0 [2025-09-23 20:19:38.561] data.WU_FadeInDelay=0 [2025-09-23 20:19:38.561] max_time_out=0 [2025-09-23 20:19:38.561] No splash screen [2025-09-23 20:19:38.561] stop dss Done [2025-09-23 20:19:38.561] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:19:38.594] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:19:38.635] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:19:38.635] /dev/mem opened. [2025-09-23 20:19:38.635] Memory mapped at address 0xffffb08aa000. [2025-09-23 20:19:38.635] Read at address 0x00600018 (0xffffb08aa018): 0x00000000 [2025-09-23 20:19:38.635] Write at address 0x00600018 (0xffffb08aa018): 0x00400040, readback 0x00400040 [2025-09-23 20:19:38.828] Loaded PowerVR consumer services. [2025-09-23 20:19:38.859] 512+0 records in [2025-09-23 20:19:38.859] 512+0 records out [2025-09-23 20:19:38.891] Waiting data available... [2025-09-23 20:19:38.907] Starting syslogd/klogd: done [2025-09-23 20:19:38.923] DML Start [2025-09-23 20:19:39.131] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:19:39.355] DML res1: 0 [2025-09-23 20:19:39.771] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:19:39.797] Read Success [2025-09-23 20:19:39.797] Verifying certificate... [2025-09-23 20:19:40.037] Verified OK [2025-09-23 20:19:40.053] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:19:41.540] Verified OK [2025-09-23 20:19:41.540] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:19:42.211] Verified OK [2025-09-23 20:19:42.211] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:19:44.978] fs.protected_hardlinks = 1 [2025-09-23 20:19:44.994] fs.protected_symlinks = 1 [2025-09-23 20:19:44.994] kernel.modules_disabled = 1 [2025-09-23 20:19:45.186] [2025-09-23 20:19:45.186] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:19:46.455] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:19:54.152] SBL1:1210.0.1.0 [2025-09-23 20:19:54.184] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:19:55.767] SBL2:1210.0.1.0 [2025-09-23 20:19:55.798] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:19:55.895] j-A [2025-09-23 20:20:03.248] The R5 Autosar Classic is running [2025-09-23 20:20:03.273] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:20:03.273] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:20:03.881] INIT: version 2.96 booting [2025-09-23 20:20:03.993] INIT: Entering runlevel: 5 [2025-09-23 20:20:04.152] mtd28 attached [2025-09-23 20:20:04.169] mtd32 attached [2025-09-23 20:20:04.169] mtd24 attached [2025-09-23 20:20:04.185] ubi0:animations is mounted. [2025-09-23 20:20:04.216] ubi1:dml_code is mounted. [2025-09-23 20:20:04.283] RTNETLINK answers: File exists [2025-09-23 20:20:04.283] ubi2:textures is mounted. [2025-09-23 20:20:04.283] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:20:04.283] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:20:04.283] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:20:04.283] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:20:04.283] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:20:04.283] data.LB_FadeInType0=100 [2025-09-23 20:20:04.283] data.CHLH_FadeInType0=0 [2025-09-23 20:20:04.283] data.WU_FadeInDelay=0 [2025-09-23 20:20:04.283] max_time_out=0 [2025-09-23 20:20:04.283] No splash screen [2025-09-23 20:20:04.283] stop dss Done [2025-09-23 20:20:04.352] /dev/mem opened. [2025-09-23 20:20:04.352] Memory mapped at address 0xffffb4e00000. [2025-09-23 20:20:04.352] Read at address 0x00600018 (0xffffb4e00018): 0x00000000 [2025-09-23 20:20:04.352] Write at address 0x00600018 (0xffffb4e00018): 0x00400040, readback 0x00400040 [2025-09-23 20:20:04.352] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:20:04.352] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:20:04.447] Loaded PowerVR consumer services. [2025-09-23 20:20:04.575] 512+0 records in [2025-09-23 20:20:04.575] 512+0 records out [2025-09-23 20:20:04.607] Waiting data available... [2025-09-23 20:20:04.623] Starting syslogd/klogd: done [2025-09-23 20:20:04.639] DML Start [2025-09-23 20:20:04.847] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:20:05.087] DML res1: 0 [2025-09-23 20:20:05.518] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:20:05.539] Read Success [2025-09-23 20:20:05.539] Verifying certificate... [2025-09-23 20:20:05.812] Verified OK [2025-09-23 20:20:05.827] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:20:07.624] Verified OK [2025-09-23 20:20:07.624] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:20:08.151] Verified OK [2025-09-23 20:20:08.151] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:20:10.614] fs.protected_hardlinks = 1 [2025-09-23 20:20:10.630] fs.protected_symlinks = 1 [2025-09-23 20:20:10.646] kernel.modules_disabled = 1 [2025-09-23 20:20:10.838] [2025-09-23 20:20:10.838] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:20:12.117] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:20:19.874] SBL1:1210.0.1.0 [2025-09-23 20:20:19.922] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:20:21.489] SBL2:1210.0.1.0 [2025-09-23 20:20:21.521] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:20:21.633] j-A [2025-09-23 20:20:28.987] The R5 Autosar Classic is running [2025-09-23 20:20:28.987] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:20:29.008] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:20:29.616] INIT: version 2.96 booting [2025-09-23 20:20:29.727] INIT: Entering runlevel: 5 [2025-09-23 20:20:29.872] mtd24 attached [2025-09-23 20:20:29.888] mtd28 attached [2025-09-23 20:20:29.904] mtd32 attached [2025-09-23 20:20:30.005] RTNETLINK answers: File exists [2025-09-23 20:20:30.005] ubi1:animations is mounted. [2025-09-23 20:20:30.005] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:20:30.005] ubi0:textures is mounted. [2025-09-23 20:20:30.005] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:20:30.005] ubi2:dml_code is mounted. [2025-09-23 20:20:30.005] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:20:30.005] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:20:30.005] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:20:30.005] data.LB_FadeInType0=100 [2025-09-23 20:20:30.005] data.CHLH_FadeInType0=0 [2025-09-23 20:20:30.005] data.WU_FadeInDelay=0 [2025-09-23 20:20:30.005] max_time_out=0 [2025-09-23 20:20:30.005] No splash screen [2025-09-23 20:20:30.005] stop dss Done [2025-09-23 20:20:30.038] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:20:30.054] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:20:30.054] /dev/mem opened. [2025-09-23 20:20:30.080] Memory mapped at address 0xffff8bec8000. [2025-09-23 20:20:30.080] Read at address 0x00600018 (0xffff8bec8018): 0x00000000 [2025-09-23 20:20:30.080] Write at address 0x00600018 (0xffff8bec8018): 0x00400040, readback 0x00400040 [2025-09-23 20:20:30.208] Loaded PowerVR consumer services. [2025-09-23 20:20:30.303] 512+0 records in [2025-09-23 20:20:30.319] 512+0 records out [2025-09-23 20:20:30.335] Starting syslogd/klogd: Waiting data available... [2025-09-23 20:20:30.351] done [2025-09-23 20:20:30.367] DML Start [2025-09-23 20:20:30.527] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:20:30.766] DML res1: 0 [2025-09-23 20:20:31.288] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:20:31.288] Read Success [2025-09-23 20:20:31.288] Verifying certificate... [2025-09-23 20:20:31.527] Verified OK [2025-09-23 20:20:31.543] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:20:33.214] Verified OK [2025-09-23 20:20:33.214] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:20:33.831] Verified OK [2025-09-23 20:20:33.831] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:20:36.389] fs.protected_hardlinks = 1 [2025-09-23 20:20:36.389] fs.protected_symlinks = 1 [2025-09-23 20:20:36.405] kernel.modules_disabled = 1 [2025-09-23 20:20:36.596] [2025-09-23 20:20:36.596] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:20:37.860] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:20:45.618] SBL1:1210.0.1.0 [2025-09-23 20:20:45.650] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:20:47.233] SBL2:1210.0.1.0 [2025-09-23 20:20:47.264] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:20:47.377] j-A [2025-09-23 20:20:54.716] The R5 Autosar Classic is running [2025-09-23 20:20:54.741] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:20:54.741] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:20:55.349] INIT: version 2.96 booting [2025-09-23 20:20:55.460] INIT: Entering runlevel: 5 [2025-09-23 20:20:55.604] mtd24 attached [2025-09-23 20:20:55.620] mtd28 attached [2025-09-23 20:20:55.636] mtd32 attached [2025-09-23 20:20:55.652] ubi0:textures is mounted. [2025-09-23 20:20:55.684] RTNETLINK answers: File exists [2025-09-23 20:20:55.684] ubi1:animations is mounted. [2025-09-23 20:20:55.741] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:20:55.741] ubi2:dml_code is mounted. [2025-09-23 20:20:55.741] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:20:55.741] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:20:55.741] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:20:55.741] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:20:55.741] data.LB_FadeInType0=100 [2025-09-23 20:20:55.741] data.CHLH_FadeInType0=0 [2025-09-23 20:20:55.741] data.WU_FadeInDelay=0 [2025-09-23 20:20:55.741] max_time_out=0 [2025-09-23 20:20:55.741] No splash screen [2025-09-23 20:20:55.741] stop dss Done [2025-09-23 20:20:55.774] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:20:55.811] /dev/mem opened. [2025-09-23 20:20:55.811] Memory mapped at address 0xffffa5c63000. [2025-09-23 20:20:55.811] Read at address 0x00600018 (0xffffa5c63018): 0x00000000 [2025-09-23 20:20:55.811] Write at address 0x00600018 (0xffffa5c63018): 0x00400040, readback 0x00400040 [2025-09-23 20:20:55.811] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:20:55.922] Loaded PowerVR consumer services. [2025-09-23 20:20:56.050] Waiting data available... [2025-09-23 20:20:56.066] 512+0 records in [2025-09-23 20:20:56.066] 512+0 records out [2025-09-23 20:20:56.081] Starting syslogd/klogd: done [2025-09-23 20:20:56.113] DML Start [2025-09-23 20:20:56.290] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:20:56.514] DML res1: 0 [2025-09-23 20:20:56.962] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:20:56.978] Read Success [2025-09-23 20:20:56.978] Verifying certificate... [2025-09-23 20:20:57.217] Verified OK [2025-09-23 20:20:57.249] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:20:58.873] Verified OK [2025-09-23 20:20:58.873] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:20:59.481] Verified OK [2025-09-23 20:20:59.497] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:21:02.214] fs.protected_hardlinks = 1 [2025-09-23 20:21:02.214] fs.protected_symlinks = 1 [2025-09-23 20:21:02.230] kernel.modules_disabled = 1 [2025-09-23 20:21:02.422] [2025-09-23 20:21:02.422] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:21:03.647] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:21:11.370] SBL1:1210.0.1.0 [2025-09-23 20:21:11.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:21:12.985] SBL2:1210.0.1.0 [2025-09-23 20:21:13.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:21:13.112] j-A [2025-09-23 20:21:20.468] The R5 Autosar Classic is running [2025-09-23 20:21:20.493] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:21:20.493] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:21:21.100] INIT: version 2.96 booting [2025-09-23 20:21:21.212] INIT: Entering runlevel: 5 [2025-09-23 20:21:21.372] mtd32 attached [2025-09-23 20:21:21.372] mtd28 attached [2025-09-23 20:21:21.388] mtd24 attached [2025-09-23 20:21:21.436] RTNETLINK answers: File exists [2025-09-23 20:21:21.481] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:21:21.481] ubi0:dml_code is mounted. [2025-09-23 20:21:21.481] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:21:21.481] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:21:21.481] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:21:21.481] ubi1:animations is mounted. [2025-09-23 20:21:21.481] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:21:21.481] ubi2:textures is mounted. [2025-09-23 20:21:21.528] data.LB_FadeInType0=100 [2025-09-23 20:21:21.528] data.CHLH_FadeInType0=0 [2025-09-23 20:21:21.528] data.WU_FadeInDelay=0 [2025-09-23 20:21:21.528] max_time_out=0 [2025-09-23 20:21:21.528] No splash screen [2025-09-23 20:21:21.528] stop dss Done [2025-09-23 20:21:21.528] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:21:21.528] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:21:21.560] /dev/mem opened. [2025-09-23 20:21:21.586] Memory mapped at address 0xffff8dd1f000. [2025-09-23 20:21:21.586] Read at address 0x00600018 (0xffff8dd1f018): 0x00000000 [2025-09-23 20:21:21.586] Write at address 0x00600018 (0xffff8dd1f018): 0x00400040, readback 0x00400040 [2025-09-23 20:21:21.714] Loaded PowerVR consumer services. [2025-09-23 20:21:21.810] 512+0 records in [2025-09-23 20:21:21.810] 512+0 records out [2025-09-23 20:21:21.826] Waiting data available... [2025-09-23 20:21:21.857] Starting syslogd/klogd: done [2025-09-23 20:21:21.874] DML Start [2025-09-23 20:21:22.050] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:21:22.290] DML res1: 0 [2025-09-23 20:21:22.736] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:21:22.736] Read Success [2025-09-23 20:21:22.736] Verifying certificate... [2025-09-23 20:21:22.960] Verified OK [2025-09-23 20:21:22.976] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:21:24.623] Verified OK [2025-09-23 20:21:24.623] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:21:25.178] Verified OK [2025-09-23 20:21:25.178] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:21:27.977] fs.protected_hardlinks = 1 [2025-09-23 20:21:27.977] fs.protected_symlinks = 1 [2025-09-23 20:21:27.993] kernel.modules_disabled = 1 [2025-09-23 20:21:28.185] [2025-09-23 20:21:28.185] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:21:29.373] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:21:37.100] SBL1:1210.0.1.0 [2025-09-23 20:21:37.148] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:21:38.715] SBL2:1210.0.1.0 [2025-09-23 20:21:38.747] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:21:38.859] j-A [2025-09-23 20:21:46.234] The R5 Autosar Classic is running [2025-09-23 20:21:46.234] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:21:46.234] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:21:46.842] INIT: version 2.96 booting [2025-09-23 20:21:46.954] INIT: Entering runlevel: 5 [2025-09-23 20:21:47.098] mtd24 attached [2025-09-23 20:21:47.114] mtd32 attached [2025-09-23 20:21:47.130] mtd28 attached [2025-09-23 20:21:47.178] ubi0:textures is mounted. [2025-09-23 20:21:47.178] RTNETLINK answers: File exists [2025-09-23 20:21:47.235] ubi2:animations is mounted. [2025-09-23 20:21:47.235] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:21:47.235] ubi1:dml_code is mounted. [2025-09-23 20:21:47.235] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:21:47.235] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:21:47.235] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:21:47.235] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:21:47.235] data.LB_FadeInType0=100 [2025-09-23 20:21:47.235] data.CHLH_FadeInType0=0 [2025-09-23 20:21:47.235] data.WU_FadeInDelay=0 [2025-09-23 20:21:47.235] max_time_out=0 [2025-09-23 20:21:47.235] No splash screen [2025-09-23 20:21:47.235] stop dss Done [2025-09-23 20:21:47.267] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:21:47.316] /dev/mem opened. [2025-09-23 20:21:47.316] Memory mapped at address 0xffffa5901000. [2025-09-23 20:21:47.316] Read at address 0x00600018 (0xffffa5901018): 0x00000000 [2025-09-23 20:21:47.316] Write at address 0x00600018 (0xffffa5901018): 0x00400040, readback 0x00400040 [2025-09-23 20:21:47.316] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:21:47.493] Loaded PowerVR consumer services. [2025-09-23 20:21:47.541] 512+0 records in [2025-09-23 20:21:47.541] 512+0 records out [2025-09-23 20:21:47.541] Waiting data available... [2025-09-23 20:21:47.588] Starting syslogd/klogd: done [2025-09-23 20:21:47.604] DML Start [2025-09-23 20:21:47.797] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:21:48.005] DML res1: 0 [2025-09-23 20:21:48.484] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:21:48.499] Read Success [2025-09-23 20:21:48.499] Verifying certificate... [2025-09-23 20:21:48.771] Verified OK [2025-09-23 20:21:48.787] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:21:50.479] Verified OK [2025-09-23 20:21:50.479] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:21:51.077] Verified OK [2025-09-23 20:21:51.077] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:21:53.603] fs.protected_hardlinks = 1 [2025-09-23 20:21:53.619] fs.protected_symlinks = 1 [2025-09-23 20:21:53.619] kernel.modules_disabled = 1 [2025-09-23 20:21:53.811] [2025-09-23 20:21:53.811] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:21:55.089] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:22:02.850] SBL1:1210.0.1.0 [2025-09-23 20:22:02.882] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:22:04.465] SBL2:1210.0.1.0 [2025-09-23 20:22:04.497] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:22:04.609] j-A [2025-09-23 20:22:11.981] The R5 Autosar Classic is running [2025-09-23 20:22:11.981] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:22:11.981] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:22:12.588] INIT: version 2.96 booting [2025-09-23 20:22:12.701] INIT: Entering runlevel: 5 [2025-09-23 20:22:12.860] mtd32 attached [2025-09-23 20:22:12.860] mtd24 attached [2025-09-23 20:22:12.876] mtd28 attached [2025-09-23 20:22:12.924] RTNETLINK answers: File exists [2025-09-23 20:22:12.924] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:22:12.963] ubi0:dml_code is mounted. [2025-09-23 20:22:12.963] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:22:12.963] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:22:12.963] ubi2:animations is mounted. [2025-09-23 20:22:12.963] ubi1:textures is mounted. [2025-09-23 20:22:12.963] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:22:12.963] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:22:12.993] data.LB_FadeInType0=100 [2025-09-23 20:22:12.993] data.CHLH_FadeInType0=0 [2025-09-23 20:22:12.993] data.WU_FadeInDelay=0 [2025-09-23 20:22:12.993] max_time_out=0 [2025-09-23 20:22:12.993] No splash screen [2025-09-23 20:22:12.993] stop dss Done [2025-09-23 20:22:13.021] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:22:13.021] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:22:13.037] /dev/mem opened. [2025-09-23 20:22:13.037] Memory mapped at address 0xffffbe664000. [2025-09-23 20:22:13.063] Read at address 0x00600018 (0xffffbe664018): 0x00000000 [2025-09-23 20:22:13.063] Write at address 0x00600018 (0xffffbe664018): 0x00400040, readback 0x00400040 [2025-09-23 20:22:13.126] Loaded PowerVR consumer services. [2025-09-23 20:22:13.307] Waiting data available... [2025-09-23 20:22:13.307] 512+0 records in [2025-09-23 20:22:13.307] 512+0 records out [2025-09-23 20:22:13.323] Starting syslogd/klogd: done [2025-09-23 20:22:13.339] DML Start [2025-09-23 20:22:13.531] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:22:13.755] DML res1: 0 [2025-09-23 20:22:14.193] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:22:14.193] Read Success [2025-09-23 20:22:14.193] Verifying certificate... [2025-09-23 20:22:14.433] Verified OK [2025-09-23 20:22:14.449] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:22:16.170] Verified OK [2025-09-23 20:22:16.170] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:22:16.727] Verified OK [2025-09-23 20:22:16.727] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:22:19.221] fs.protected_hardlinks = 1 [2025-09-23 20:22:19.221] fs.protected_symlinks = 1 [2025-09-23 20:22:19.253] kernel.modules_disabled = 1 [2025-09-23 20:22:19.445] [2025-09-23 20:22:19.445] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:22:20.868] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:22:28.598] SBL1:1210.0.1.0 [2025-09-23 20:22:28.646] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:22:30.229] SBL2:1210.0.1.0 [2025-09-23 20:22:30.261] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:22:30.357] j-A [2025-09-23 20:22:37.713] The R5 Autosar Classic is running [2025-09-23 20:22:37.736] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:22:37.736] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:22:38.344] INIT: version 2.96 booting [2025-09-23 20:22:38.456] INIT: Entering runlevel: 5 [2025-09-23 20:22:38.600] mtd24 attached [2025-09-23 20:22:38.616] mtd28 attached [2025-09-23 20:22:38.616] mtd32 attached [2025-09-23 20:22:38.733] ubi0:textures is mounted. [2025-09-23 20:22:38.733] RTNETLINK answers: File exists [2025-09-23 20:22:38.733] ubi1:animations is mounted. [2025-09-23 20:22:38.733] ubi2:dml_code is mounted. [2025-09-23 20:22:38.733] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:22:38.733] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:22:38.733] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:22:38.733] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:22:38.733] data.LB_FadeInType0=100 [2025-09-23 20:22:38.733] data.CHLH_FadeInType0=0 [2025-09-23 20:22:38.733] data.WU_FadeInDelay=0 [2025-09-23 20:22:38.733] max_time_out=0 [2025-09-23 20:22:38.733] No splash screen [2025-09-23 20:22:38.733] stop dss Done [2025-09-23 20:22:38.733] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:22:38.798] /dev/mem opened. [2025-09-23 20:22:38.798] Memory mapped at address 0xffffb2ce8000. [2025-09-23 20:22:38.798] Read at address 0x00600018 (0xffffb2ce8018): 0x00000000 [2025-09-23 20:22:38.798] Write at address 0x00600018 (0xffffb2ce8018): 0x00400040, readback 0x00400040 [2025-09-23 20:22:38.830] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:22:38.846] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:22:38.991] Loaded PowerVR consumer services. [2025-09-23 20:22:39.039] 512+0 records in [2025-09-23 20:22:39.039] 512+0 records out [2025-09-23 20:22:39.054] Waiting data available... [2025-09-23 20:22:39.086] Starting syslogd/klogd: done [2025-09-23 20:22:39.102] DML Start [2025-09-23 20:22:39.279] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:22:39.502] DML res1: 0 [2025-09-23 20:22:39.978] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:22:39.978] Read Success [2025-09-23 20:22:39.978] Verifying certificate... [2025-09-23 20:22:40.202] Verified OK [2025-09-23 20:22:40.218] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:22:41.929] Verified OK [2025-09-23 20:22:41.929] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:22:42.521] Verified OK [2025-09-23 20:22:42.537] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:22:45.063] fs.protected_hardlinks = 1 [2025-09-23 20:22:45.079] fs.protected_symlinks = 1 [2025-09-23 20:22:45.079] kernel.modules_disabled = 1 [2025-09-23 20:22:45.287] [2025-09-23 20:22:45.287] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:22:46.618] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:22:54.322] SBL1:1210.0.1.0 [2025-09-23 20:22:54.370] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:22:55.937] SBL2:1210.0.1.0 [2025-09-23 20:22:55.969] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:22:56.080] j-A [2025-09-23 20:23:03.436] The R5 Autosar Classic is running [2025-09-23 20:23:03.436] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:23:03.457] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:23:04.064] INIT: version 2.96 booting [2025-09-23 20:23:04.177] INIT: Entering runlevel: 5 [2025-09-23 20:23:04.320] mtd24 attached [2025-09-23 20:23:04.336] mtd28 attached [2025-09-23 20:23:04.352] mtd32 attached [2025-09-23 20:23:04.400] RTNETLINK answers: File exists [2025-09-23 20:23:04.400] ubi0:textures is mounted. [2025-09-23 20:23:04.453] ubi1:animations is mounted. [2025-09-23 20:23:04.453] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:23:04.453] ubi2:dml_code is mounted. [2025-09-23 20:23:04.453] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:23:04.453] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:23:04.453] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:23:04.453] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:23:04.453] data.LB_FadeInType0=100 [2025-09-23 20:23:04.453] data.CHLH_FadeInType0=0 [2025-09-23 20:23:04.453] data.WU_FadeInDelay=0 [2025-09-23 20:23:04.453] max_time_out=0 [2025-09-23 20:23:04.453] No splash screen [2025-09-23 20:23:04.453] stop dss Done [2025-09-23 20:23:04.469] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:23:04.492] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:23:04.532] /dev/mem opened. [2025-09-23 20:23:04.532] Memory mapped at address 0xffffa122a000. [2025-09-23 20:23:04.532] Read at address 0x00600018 (0xffffa122a018): 0x00000000 [2025-09-23 20:23:04.532] Write at address 0x00600018 (0xffffa122a018): 0x00400040, readback 0x00400040 [2025-09-23 20:23:04.627] Loaded PowerVR consumer services. [2025-09-23 20:23:04.755] 512+0 records in [2025-09-23 20:23:04.755] 512+0 records out [2025-09-23 20:23:04.787] Waiting data available... [2025-09-23 20:23:04.803] Starting syslogd/klogd: done [2025-09-23 20:23:04.835] DML Start [2025-09-23 20:23:05.043] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:23:05.251] DML res1: 0 [2025-09-23 20:23:05.688] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:23:05.688] Read Success [2025-09-23 20:23:05.688] Verifying certificate... [2025-09-23 20:23:05.976] Verified OK [2025-09-23 20:23:05.992] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:23:07.620] Verified OK [2025-09-23 20:23:07.620] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:23:08.116] Verified OK [2025-09-23 20:23:08.131] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:23:10.866] fs.protected_hardlinks = 1 [2025-09-23 20:23:10.896] fs.protected_symlinks = 1 [2025-09-23 20:23:10.896] kernel.modules_disabled = 1 [2025-09-23 20:23:11.087] [2025-09-23 20:23:11.087] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:23:12.365] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:23:20.080] SBL1:1210.0.1.0 [2025-09-23 20:23:20.112] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:23:21.695] SBL2:1210.0.1.0 [2025-09-23 20:23:21.728] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:23:21.824] j-A [2025-09-23 20:23:29.177] The R5 Autosar Classic is running [2025-09-23 20:23:29.202] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:23:29.202] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:23:29.810] INIT: version 2.96 booting [2025-09-23 20:23:29.922] INIT: Entering runlevel: 5 [2025-09-23 20:23:30.066] mtd24 attached [2025-09-23 20:23:30.098] mtd32 attached [2025-09-23 20:23:30.098] mtd28 attached [2025-09-23 20:23:30.114] ubi0:textures is mounted. [2025-09-23 20:23:30.146] RTNETLINK answers: File exists [2025-09-23 20:23:30.146] ubi1:dml_code is mounted. [2025-09-23 20:23:30.204] ubi2:animations is mounted. [2025-09-23 20:23:30.204] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:23:30.204] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:23:30.204] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:23:30.204] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:23:30.204] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:23:30.204] data.LB_FadeInType0=100 [2025-09-23 20:23:30.204] data.CHLH_FadeInType0=0 [2025-09-23 20:23:30.204] data.WU_FadeInDelay=0 [2025-09-23 20:23:30.204] max_time_out=0 [2025-09-23 20:23:30.204] No splash screen [2025-09-23 20:23:30.204] stop dss Done [2025-09-23 20:23:30.247] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:23:30.247] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:23:30.279] /dev/mem opened. [2025-09-23 20:23:30.279] Memory mapped at address 0xffffb661a000. [2025-09-23 20:23:30.279] Read at address 0x00600018 (0xffffb661a018): 0x00000000 [2025-09-23 20:23:30.279] Write at address 0x00600018 (0xffffb661a018): 0x00400040, readback 0x00400040 [2025-09-23 20:23:30.407] Loaded PowerVR consumer services. [2025-09-23 20:23:30.529] Waiting data available... [2025-09-23 20:23:30.529] 512+0 records in [2025-09-23 20:23:30.529] 512+0 records out [2025-09-23 20:23:30.544] Starting syslogd/klogd: done [2025-09-23 20:23:30.560] DML Start [2025-09-23 20:23:30.753] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:23:30.977] DML res1: 0 [2025-09-23 20:23:31.424] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:23:31.440] Read Success [2025-09-23 20:23:31.440] Verifying certificate... [2025-09-23 20:23:31.712] Verified OK [2025-09-23 20:23:31.728] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:23:33.317] Verified OK [2025-09-23 20:23:33.317] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:23:33.985] Verified OK [2025-09-23 20:23:33.985] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:23:36.682] fs.protected_hardlinks = 1 [2025-09-23 20:23:36.682] fs.protected_symlinks = 1 [2025-09-23 20:23:36.682] kernel.modules_disabled = 1 [2025-09-23 20:23:36.874] [2025-09-23 20:23:36.874] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:23:38.073] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:23:45.804] SBL1:1210.0.1.0 [2025-09-23 20:23:45.852] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:23:47.418] SBL2:1210.0.1.0 [2025-09-23 20:23:47.466] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:23:47.562] j-A [2025-09-23 20:23:54.916] The R5 Autosar Classic is running [2025-09-23 20:23:54.939] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:23:54.939] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:23:55.546] INIT: version 2.96 booting [2025-09-23 20:23:55.657] INIT: Entering runlevel: 5 [2025-09-23 20:23:55.802] mtd24 attached [2025-09-23 20:23:55.818] mtd32 attached [2025-09-23 20:23:55.833] mtd28 attached [2025-09-23 20:23:55.866] ubi0:textures is mounted. [2025-09-23 20:23:55.882] RTNETLINK answers: File exists [2025-09-23 20:23:55.934] ubi1:dml_code is mounted. [2025-09-23 20:23:55.934] ubi2:animations is mounted. [2025-09-23 20:23:55.934] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:23:55.934] data.LB_FadeInType0=100 [2025-09-23 20:23:55.934] data.CHLH_FadeInType0=0 [2025-09-23 20:23:55.934] data.WU_FadeInDelay=0 [2025-09-23 20:23:55.934] max_time_out=0 [2025-09-23 20:23:55.934] No splash screen [2025-09-23 20:23:55.934] stop dss Done [2025-09-23 20:23:55.934] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:23:55.934] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:23:55.950] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:23:55.966] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:23:55.998] /dev/mem opened. [2025-09-23 20:23:55.998] Memory mapped at address 0xffff9fae8000. [2025-09-23 20:23:55.998] Read at address 0x00600018 (0xffff9fae8018): 0x00000000 [2025-09-23 20:23:55.998] Write at address 0x00600018 (0xffff9fae8018): 0x00400040, readback 0x00400040 [2025-09-23 20:23:56.077] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:23:56.077] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:23:56.222] Loaded PowerVR consumer services. [2025-09-23 20:23:56.238] 512+0 records in [2025-09-23 20:23:56.238] 512+0 records out [2025-09-23 20:23:56.270] Starting syslogd/klogd: done [2025-09-23 20:23:56.333] Waiting data available... [2025-09-23 20:23:56.333] DML Start [2025-09-23 20:23:56.509] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:23:56.733] DML res1: 0 [2025-09-23 20:23:57.162] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:23:57.162] Read Success [2025-09-23 20:23:57.162] Verifying certificate... [2025-09-23 20:23:57.402] Verified OK [2025-09-23 20:23:57.418] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:23:59.343] Verified OK [2025-09-23 20:23:59.343] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:23:59.829] Verified OK [2025-09-23 20:23:59.829] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:24:02.132] fs.protected_hardlinks = 1 [2025-09-23 20:24:02.147] fs.protected_symlinks = 1 [2025-09-23 20:24:02.147] kernel.modules_disabled = 1 [2025-09-23 20:24:02.355] [2025-09-23 20:24:02.355] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:24:03.777] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:24:11.538] SBL1:1210.0.1.0 [2025-09-23 20:24:11.586] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:24:13.153] SBL2:1210.0.1.0 [2025-09-23 20:24:13.185] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:24:13.297] j-A [2025-09-23 20:24:20.667] The R5 Autosar Classic is running [2025-09-23 20:24:20.667] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:24:20.667] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:24:21.275] INIT: version 2.96 booting [2025-09-23 20:24:21.387] INIT: Entering runlevel: 5 [2025-09-23 20:24:21.531] mtd24 attached [2025-09-23 20:24:21.547] mtd28 attached [2025-09-23 20:24:21.563] mtd32 attached [2025-09-23 20:24:21.578] ubi0:textures is mounted. [2025-09-23 20:24:21.610] ubi1:animations is mounted. [2025-09-23 20:24:21.610] RTNETLINK answers: File exists [2025-09-23 20:24:21.638] ubi2:dml_code is mounted. [2025-09-23 20:24:21.638] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:24:21.638] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:24:21.638] data.LB_FadeInType0=100 [2025-09-23 20:24:21.670] data.CHLH_FadeInType0=0 [2025-09-23 20:24:21.670] data.WU_FadeInDelay=0 [2025-09-23 20:24:21.670] max_time_out=0 [2025-09-23 20:24:21.670] No splash screen [2025-09-23 20:24:21.670] stop dss Done [2025-09-23 20:24:21.670] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:24:21.670] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:24:21.670] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:24:21.735] /dev/mem opened. [2025-09-23 20:24:21.735] Memory mapped at address 0xffff981c6000. [2025-09-23 20:24:21.735] Read at address 0x00600018 (0xffff981c6018): 0x00000000 [2025-09-23 20:24:21.735] Write at address 0x00600018 (0xffff981c6018): 0x00400040, readback 0x00400040 [2025-09-23 20:24:21.751] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:24:21.767] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:24:21.943] Loaded PowerVR consumer services. [2025-09-23 20:24:21.959] 512+0 records in [2025-09-23 20:24:21.975] 512+0 records out [2025-09-23 20:24:22.007] Waiting data available... [2025-09-23 20:24:22.023] Starting syslogd/klogd: done [2025-09-23 20:24:22.039] DML Start [2025-09-23 20:24:22.200] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:24:22.407] DML res1: 0 [2025-09-23 20:24:22.913] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:24:22.913] Read Success [2025-09-23 20:24:22.913] Verifying certificate... [2025-09-23 20:24:23.185] Verified OK [2025-09-23 20:24:23.201] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:24:24.856] Verified OK [2025-09-23 20:24:24.856] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:24:25.479] Verified OK [2025-09-23 20:24:25.500] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:24:28.139] fs.protected_hardlinks = 1 [2025-09-23 20:24:28.155] fs.protected_symlinks = 1 [2025-09-23 20:24:28.155] kernel.modules_disabled = 1 [2025-09-23 20:24:28.347] [2025-09-23 20:24:28.347] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:24:29.562] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:24:37.275] SBL1:1210.0.1.0 [2025-09-23 20:24:37.307] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:24:38.889] SBL2:1210.0.1.0 [2025-09-23 20:24:38.921] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:24:39.033] j-A [2025-09-23 20:24:46.371] The R5 Autosar Classic is running [2025-09-23 20:24:46.402] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:24:46.402] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:24:47.010] INIT: version 2.96 booting [2025-09-23 20:24:47.121] INIT: Entering runlevel: 5 [2025-09-23 20:24:47.281] mtd24 attached [2025-09-23 20:24:47.281] mtd28 attached [2025-09-23 20:24:47.297] mtd32 attached [2025-09-23 20:24:47.345] ubi0:textures is mounted. [2025-09-23 20:24:47.345] RTNETLINK answers: File exists [2025-09-23 20:24:47.361] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:24:47.361] ubi1:animations is mounted. [2025-09-23 20:24:47.417] ubi2:dml_code is mounted. [2025-09-23 20:24:47.417] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:24:47.417] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:24:47.417] data.LB_FadeInType0=100 [2025-09-23 20:24:47.417] data.CHLH_FadeInType0=0 [2025-09-23 20:24:47.417] data.WU_FadeInDelay=0 [2025-09-23 20:24:47.417] max_time_out=0 [2025-09-23 20:24:47.417] No splash screen [2025-09-23 20:24:47.417] stop dss Done [2025-09-23 20:24:47.417] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:24:47.417] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:24:47.448] /dev/mem opened. [2025-09-23 20:24:47.491] Memory mapped at address 0xffffa7751000. [2025-09-23 20:24:47.491] Read at address 0x00600018 (0xffffa7751018): 0x00000000 [2025-09-23 20:24:47.491] Write at address 0x00600018 (0xffffa7751018): 0x00400040, readback 0x00400040 [2025-09-23 20:24:47.491] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:24:47.491] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:24:47.571] Loaded PowerVR consumer services. [2025-09-23 20:24:47.716] Waiting data available... [2025-09-23 20:24:47.731] 512+0 records in [2025-09-23 20:24:47.731] 512+0 records out [2025-09-23 20:24:47.763] Starting syslogd/klogd: done [2025-09-23 20:24:47.779] DML Start [2025-09-23 20:24:47.955] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:24:48.162] DML res1: 0 [2025-09-23 20:24:48.686] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:24:48.686] Read Success [2025-09-23 20:24:48.686] Verifying certificate... [2025-09-23 20:24:48.957] Verified OK [2025-09-23 20:24:48.973] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:24:50.715] Verified OK [2025-09-23 20:24:50.715] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:24:51.271] Verified OK [2025-09-23 20:24:51.271] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:24:53.844] fs.protected_hardlinks = 1 [2025-09-23 20:24:53.844] fs.protected_symlinks = 1 [2025-09-23 20:24:53.860] kernel.modules_disabled = 1 [2025-09-23 20:24:54.069] [2025-09-23 20:24:54.069] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:24:55.284] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:25:03.039] SBL1:1210.0.1.0 [2025-09-23 20:25:03.071] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:25:04.653] SBL2:1210.0.1.0 [2025-09-23 20:25:04.686] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:25:04.781] j-A [2025-09-23 20:25:12.137] The R5 Autosar Classic is running [2025-09-23 20:25:12.162] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:25:12.162] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:25:12.769] INIT: version 2.96 booting [2025-09-23 20:25:12.881] INIT: Entering runlevel: 5 [2025-09-23 20:25:13.041] mtd32 attached [2025-09-23 20:25:13.041] mtd24 attached [2025-09-23 20:25:13.056] mtd28 attached [2025-09-23 20:25:13.104] ubi0:dml_code is mounted. [2025-09-23 20:25:13.104] RTNETLINK answers: File exists [2025-09-23 20:25:13.163] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:25:13.163] ubi1:textures is mounted. [2025-09-23 20:25:13.163] ubi2:animations is mounted. [2025-09-23 20:25:13.163] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:25:13.163] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:25:13.163] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:25:13.163] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:25:13.163] data.LB_FadeInType0=100 [2025-09-23 20:25:13.163] data.CHLH_FadeInType0=0 [2025-09-23 20:25:13.163] data.WU_FadeInDelay=0 [2025-09-23 20:25:13.163] max_time_out=0 [2025-09-23 20:25:13.163] No splash screen [2025-09-23 20:25:13.163] stop dss Done [2025-09-23 20:25:13.228] /dev/mem opened. [2025-09-23 20:25:13.228] Memory mapped at address 0xffffa1753000. [2025-09-23 20:25:13.228] Read at address 0x00600018 (0xffffa1753018): 0x00000000 [2025-09-23 20:25:13.228] Write at address 0x00600018 (0xffffa1753018): 0x00400040, readback 0x00400040 [2025-09-23 20:25:13.267] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:25:13.267] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:25:13.411] Loaded PowerVR consumer services. [2025-09-23 20:25:13.500] Waiting data available... [2025-09-23 20:25:13.500] 512+0 records in [2025-09-23 20:25:13.500] 512+0 records out [2025-09-23 20:25:13.532] Starting syslogd/klogd: done [2025-09-23 20:25:13.548] DML Start [2025-09-23 20:25:13.739] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:25:13.947] DML res1: 0 [2025-09-23 20:25:14.418] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:25:14.418] Read Success [2025-09-23 20:25:14.418] Verifying certificate... [2025-09-23 20:25:14.689] Verified OK [2025-09-23 20:25:14.721] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:25:16.430] Verified OK [2025-09-23 20:25:16.430] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:25:17.062] Verified OK [2025-09-23 20:25:17.062] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:25:19.668] fs.protected_hardlinks = 1 [2025-09-23 20:25:19.684] fs.protected_symlinks = 1 [2025-09-23 20:25:19.684] kernel.modules_disabled = 1 [2025-09-23 20:25:19.876] [2025-09-23 20:25:19.876] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:25:21.052] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:25:28.747] SBL1:1210.0.1.0 [2025-09-23 20:25:28.795] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:25:30.362] SBL2:1210.0.1.0 [2025-09-23 20:25:30.394] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:25:30.505] j-A [2025-09-23 20:25:37.862] The R5 Autosar Classic is running [2025-09-23 20:25:37.862] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:25:37.883] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:25:38.490] INIT: version 2.96 booting [2025-09-23 20:25:38.602] INIT: Entering runlevel: 5 [2025-09-23 20:25:38.746] mtd24 attached [2025-09-23 20:25:38.762] mtd28 attached [2025-09-23 20:25:38.794] mtd32 attached [2025-09-23 20:25:38.794] ubi0:textures is mounted. [2025-09-23 20:25:38.826] ubi1:animations is mounted. [2025-09-23 20:25:38.826] RTNETLINK answers: File exists [2025-09-23 20:25:38.888] ubi2:dml_code is mounted. [2025-09-23 20:25:38.888] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:25:38.888] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:25:38.888] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:25:38.888] data.LB_FadeInType0=100 [2025-09-23 20:25:38.888] data.CHLH_FadeInType0=0 [2025-09-23 20:25:38.888] data.WU_FadeInDelay=0 [2025-09-23 20:25:38.888] max_time_out=0 [2025-09-23 20:25:38.888] No splash screen [2025-09-23 20:25:38.888] stop dss Done [2025-09-23 20:25:38.888] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:25:38.888] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:25:38.959] /dev/mem opened. [2025-09-23 20:25:38.959] Memory mapped at address 0xffffa9a47000. [2025-09-23 20:25:38.959] Read at address 0x00600018 (0xffffa9a47018): 0x00000000 [2025-09-23 20:25:38.959] Write at address 0x00600018 (0xffffa9a47018): 0x00400040, readback 0x00400040 [2025-09-23 20:25:38.988] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:25:38.988] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:25:39.148] Loaded PowerVR consumer services. [2025-09-23 20:25:39.180] 512+0 records in [2025-09-23 20:25:39.196] 512+0 records out [2025-09-23 20:25:39.212] Starting syslogd/klogd: done [2025-09-23 20:25:39.244] Waiting data available... [2025-09-23 20:25:39.260] DML Start [2025-09-23 20:25:39.435] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:25:39.659] DML res1: 0 [2025-09-23 20:25:40.099] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:25:40.099] Read Success [2025-09-23 20:25:40.099] Verifying certificate... [2025-09-23 20:25:40.339] Verified OK [2025-09-23 20:25:40.355] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:25:42.203] Verified OK [2025-09-23 20:25:42.203] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:25:42.709] Verified OK [2025-09-23 20:25:42.709] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:25:45.267] fs.protected_hardlinks = 1 [2025-09-23 20:25:45.284] fs.protected_symlinks = 1 [2025-09-23 20:25:45.284] kernel.modules_disabled = 1 [2025-09-23 20:25:45.475] [2025-09-23 20:25:45.475] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:25:46.747] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:25:54.493] SBL1:1210.0.1.0 [2025-09-23 20:25:54.525] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:25:56.108] SBL2:1210.0.1.0 [2025-09-23 20:25:56.140] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:25:56.252] j-A [2025-09-23 20:26:03.592] The R5 Autosar Classic is running [2025-09-23 20:26:03.616] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:26:03.616] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:26:04.224] INIT: version 2.96 booting [2025-09-23 20:26:04.336] INIT: Entering runlevel: 5 [2025-09-23 20:26:04.479] mtd24 attached [2025-09-23 20:26:04.495] mtd32 attached [2025-09-23 20:26:04.511] mtd28 attached [2025-09-23 20:26:04.617] ubi0:textures is mounted. [2025-09-23 20:26:04.617] RTNETLINK answers: File exists [2025-09-23 20:26:04.617] ubi2:animations is mounted. [2025-09-23 20:26:04.617] ubi1:dml_code is mounted. [2025-09-23 20:26:04.617] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:26:04.617] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:26:04.617] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:26:04.617] data.LB_FadeInType0=100 [2025-09-23 20:26:04.617] data.CHLH_FadeInType0=0 [2025-09-23 20:26:04.617] data.WU_FadeInDelay=0 [2025-09-23 20:26:04.617] max_time_out=0 [2025-09-23 20:26:04.617] No splash screen [2025-09-23 20:26:04.617] stop dss Done [2025-09-23 20:26:04.617] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:26:04.617] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:26:04.670] /dev/mem opened. [2025-09-23 20:26:04.670] Memory mapped at address 0xffffb1db6000. [2025-09-23 20:26:04.670] Read at address 0x00600018 (0xffffb1db6018): 0x00000000 [2025-09-23 20:26:04.670] Write at address 0x00600018 (0xffffb1db6018): 0x00400040, readback 0x00400040 [2025-09-23 20:26:04.702] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:26:04.724] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:26:04.916] Loaded PowerVR consumer services. [2025-09-23 20:26:04.932] Waiting data available... [2025-09-23 20:26:04.948] 512+0 records in [2025-09-23 20:26:04.964] 512+0 records out [2025-09-23 20:26:04.980] Starting syslogd/klogd: done [2025-09-23 20:26:04.996] DML Start [2025-09-23 20:26:05.203] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:26:05.443] DML res1: 0 [2025-09-23 20:26:05.827] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:26:05.850] Read Success [2025-09-23 20:26:05.850] Verifying certificate... [2025-09-23 20:26:06.090] Verified OK [2025-09-23 20:26:06.106] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:26:07.769] Verified OK [2025-09-23 20:26:07.769] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:26:08.408] Verified OK [2025-09-23 20:26:08.408] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:26:11.094] fs.protected_hardlinks = 1 [2025-09-23 20:26:11.110] fs.protected_symlinks = 1 [2025-09-23 20:26:11.110] kernel.modules_disabled = 1 [2025-09-23 20:26:11.302] [2025-09-23 20:26:11.302] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:26:12.529] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:26:20.228] SBL1:1210.0.1.0 [2025-09-23 20:26:20.260] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:26:21.843] SBL2:1210.0.1.0 [2025-09-23 20:26:21.875] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:26:21.986] j-A [2025-09-23 20:26:29.358] The R5 Autosar Classic is running [2025-09-23 20:26:29.358] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:26:29.358] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:26:29.967] INIT: version 2.96 booting [2025-09-23 20:26:30.078] INIT: Entering runlevel: 5 [2025-09-23 20:26:30.222] mtd28 attached [2025-09-23 20:26:30.238] mtd24 attached [2025-09-23 20:26:30.254] mtd32 attached [2025-09-23 20:26:30.286] ubi0:animations is mounted. [2025-09-23 20:26:30.336] RTNETLINK answers: File exists [2025-09-23 20:26:30.336] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:26:30.336] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:26:30.336] ubi1:textures is mounted. [2025-09-23 20:26:30.336] ubi2:dml_code is mounted. [2025-09-23 20:26:30.336] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:26:30.336] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:26:30.336] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:26:30.336] data.LB_FadeInType0=100 [2025-09-23 20:26:30.357] data.CHLH_FadeInType0=0 [2025-09-23 20:26:30.357] data.WU_FadeInDelay=0 [2025-09-23 20:26:30.357] max_time_out=0 [2025-09-23 20:26:30.357] No splash screen [2025-09-23 20:26:30.357] stop dss Done [2025-09-23 20:26:30.418] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:26:30.418] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:26:30.418] /dev/mem opened. [2025-09-23 20:26:30.418] Memory mapped at address 0xffffb8a35000. [2025-09-23 20:26:30.418] Read at address 0x00600018 (0xffffb8a35018): 0x00000000 [2025-09-23 20:26:30.418] Write at address 0x00600018 (0xffffb8a35018): 0x00400040, readback 0x00400040 [2025-09-23 20:26:30.514] Loaded PowerVR consumer services. [2025-09-23 20:26:30.688] Waiting data available... [2025-09-23 20:26:30.688] 512+0 records in [2025-09-23 20:26:30.688] 512+0 records out [2025-09-23 20:26:30.703] Starting syslogd/klogd: done [2025-09-23 20:26:30.719] DML Start [2025-09-23 20:26:30.911] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:26:31.135] DML res1: 0 [2025-09-23 20:26:31.583] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:26:31.583] Read Success [2025-09-23 20:26:31.599] Verifying certificate... [2025-09-23 20:26:31.871] Verified OK [2025-09-23 20:26:31.887] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:26:33.566] Verified OK [2025-09-23 20:26:33.566] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:26:34.206] Verified OK [2025-09-23 20:26:34.206] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:26:36.716] fs.protected_hardlinks = 1 [2025-09-23 20:26:36.745] fs.protected_symlinks = 1 [2025-09-23 20:26:36.745] kernel.modules_disabled = 1 [2025-09-23 20:26:36.921] [2025-09-23 20:26:36.921] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:26:38.221] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:26:45.961] SBL1:1210.0.1.0 [2025-09-23 20:26:46.009] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:26:47.575] SBL2:1210.0.1.0 [2025-09-23 20:26:47.608] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:26:47.720] j-A [2025-09-23 20:26:55.095] The R5 Autosar Classic is running [2025-09-23 20:26:55.095] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:26:55.095] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:26:55.702] INIT: version 2.96 booting [2025-09-23 20:26:55.799] INIT: Entering runlevel: 5 [2025-09-23 20:26:55.958] mtd24 attached [2025-09-23 20:26:55.974] mtd28 attached [2025-09-23 20:26:55.974] mtd32 attached [2025-09-23 20:26:56.006] ubi0:textures is mounted. [2025-09-23 20:26:56.086] RTNETLINK answers: File exists [2025-09-23 20:26:56.086] ubi1:animations is mounted. [2025-09-23 20:26:56.086] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:26:56.086] ubi2:dml_code is mounted. [2025-09-23 20:26:56.086] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:26:56.086] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:26:56.086] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:26:56.086] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:26:56.086] data.LB_FadeInType0=100 [2025-09-23 20:26:56.086] data.CHLH_FadeInType0=0 [2025-09-23 20:26:56.086] data.WU_FadeInDelay=0 [2025-09-23 20:26:56.086] max_time_out=0 [2025-09-23 20:26:56.086] No splash screen [2025-09-23 20:26:56.086] stop dss Done [2025-09-23 20:26:56.178] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:26:56.178] /dev/mem opened. [2025-09-23 20:26:56.178] Memory mapped at address 0xffffa6b76000. [2025-09-23 20:26:56.178] Read at address 0x00600018 (0xffffa6b76018): 0x00000000 [2025-09-23 20:26:56.178] Write at address 0x00600018 (0xffffa6b76018): 0x00400040, readback 0x00400040 [2025-09-23 20:26:56.178] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:26:56.274] Loaded PowerVR consumer services. [2025-09-23 20:26:56.402] Waiting data available... [2025-09-23 20:26:56.419] 512+0 records in [2025-09-23 20:26:56.419] 512+0 records out [2025-09-23 20:26:56.434] Starting syslogd/klogd: done [2025-09-23 20:26:56.450] DML Start [2025-09-23 20:26:56.642] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:26:56.850] DML res1: 0 [2025-09-23 20:26:57.310] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:26:57.310] Read Success [2025-09-23 20:26:57.310] Verifying certificate... [2025-09-23 20:26:57.550] Verified OK [2025-09-23 20:26:57.550] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:26:59.230] Verified OK [2025-09-23 20:26:59.230] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:26:59.860] Verified OK [2025-09-23 20:26:59.860] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:27:02.499] fs.protected_hardlinks = 1 [2025-09-23 20:27:02.515] fs.protected_symlinks = 1 [2025-09-23 20:27:02.515] kernel.modules_disabled = 1 [2025-09-23 20:27:02.723] [2025-09-23 20:27:02.723] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:27:03.963] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:27:11.690] SBL1:1210.0.1.0 [2025-09-23 20:27:11.738] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:27:13.304] SBL2:1210.0.1.0 [2025-09-23 20:27:13.337] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:27:13.448] j-A [2025-09-23 20:27:20.824] The R5 Autosar Classic is running [2025-09-23 20:27:20.824] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:27:20.824] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:27:21.432] INIT: version 2.96 booting [2025-09-23 20:27:21.543] INIT: Entering runlevel: 5 [2025-09-23 20:27:21.703] mtd28 attached [2025-09-23 20:27:21.703] mtd24 attached [2025-09-23 20:27:21.719] mtd32 attached [2025-09-23 20:27:21.821] ubi0:animations is mounted. [2025-09-23 20:27:21.821] ubi1:textures is mounted. [2025-09-23 20:27:21.821] RTNETLINK answers: File exists [2025-09-23 20:27:21.821] ubi2:dml_code is mounted. [2025-09-23 20:27:21.821] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:27:21.821] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:27:21.821] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:27:21.821] data.LB_FadeInType0=100 [2025-09-23 20:27:21.821] data.CHLH_FadeInType0=0 [2025-09-23 20:27:21.821] data.WU_FadeInDelay=0 [2025-09-23 20:27:21.821] max_time_out=0 [2025-09-23 20:27:21.821] No splash screen [2025-09-23 20:27:21.821] stop dss Done [2025-09-23 20:27:21.821] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:27:21.821] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:27:21.869] /dev/mem opened. [2025-09-23 20:27:21.869] Memory mapped at address 0xffffae12c000. [2025-09-23 20:27:21.895] Read at address 0x00600018 (0xffffae12c018): 0x00000000 [2025-09-23 20:27:21.895] Write at address 0x00600018 (0xffffae12c018): 0x00400040, readback 0x00400040 [2025-09-23 20:27:21.943] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:27:21.973] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:27:22.101] Loaded PowerVR consumer services. [2025-09-23 20:27:22.149] Waiting data available... [2025-09-23 20:27:22.165] 512+0 records in [2025-09-23 20:27:22.165] 512+0 records out [2025-09-23 20:27:22.181] Starting syslogd/klogd: done [2025-09-23 20:27:22.213] DML Start [2025-09-23 20:27:22.389] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:27:22.629] DML res1: 0 [2025-09-23 20:27:22.991] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:27:22.991] Read Success [2025-09-23 20:27:22.991] Verifying certificate... [2025-09-23 20:27:23.231] Verified OK [2025-09-23 20:27:23.247] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:27:24.782] Verified OK [2025-09-23 20:27:24.798] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:27:25.478] Verified OK [2025-09-23 20:27:25.478] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:27:28.213] fs.protected_hardlinks = 1 [2025-09-23 20:27:28.213] fs.protected_symlinks = 1 [2025-09-23 20:27:28.229] kernel.modules_disabled = 1 [2025-09-23 20:27:28.405] [2025-09-23 20:27:28.405] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:27:29.713] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:27:37.431] SBL1:1210.0.1.0 [2025-09-23 20:27:37.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:27:39.046] SBL2:1210.0.1.0 [2025-09-23 20:27:39.078] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 20:27:39.190] j-A [2025-09-23 20:27:46.543] The R5 Autosar Classic is running [2025-09-23 20:27:46.543] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:27:46.564] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:27:47.172] INIT: version 2.96 booting [2025-09-23 20:27:47.284] INIT: Entering runlevel: 5 [2025-09-23 20:27:47.444] mtd28 attached [2025-09-23 20:27:47.444] mtd24 attached [2025-09-23 20:27:47.476] ubi0:animations is mounted. [2025-09-23 20:27:47.476] mtd32 attached [2025-09-23 20:27:47.508] ubi1:textures is mounted. [2025-09-23 20:27:47.524] RTNETLINK answers: File exists [2025-09-23 20:27:47.524] ubi2:dml_code is mounted. [2025-09-23 20:27:47.576] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:27:47.576] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:27:47.576] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:27:47.576] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:27:47.576] data.LB_FadeInType0=100 [2025-09-23 20:27:47.576] data.CHLH_FadeInType0=0 [2025-09-23 20:27:47.576] data.WU_FadeInDelay=0 [2025-09-23 20:27:47.576] max_time_out=0 [2025-09-23 20:27:47.576] No splash screen [2025-09-23 20:27:47.576] stop dss Done [2025-09-23 20:27:47.576] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:27:47.623] /dev/mem opened. [2025-09-23 20:27:47.623] Memory mapped at address 0xffff914ef000. [2025-09-23 20:27:47.655] Read at address 0x00600018 (0xffff914ef018): 0x00000000 [2025-09-23 20:27:47.655] Write at address 0x00600018 (0xffff914ef018): 0x00400040, readback 0x00400040 [2025-09-23 20:27:47.655] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:27:47.655] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:27:47.832] Loaded PowerVR consumer services. [2025-09-23 20:27:47.907] 512+0 records in [2025-09-23 20:27:47.907] 512+0 records out [2025-09-23 20:27:47.907] Waiting data available... [2025-09-23 20:27:47.938] Starting syslogd/klogd: done [2025-09-23 20:27:47.955] DML Start [2025-09-23 20:27:48.131] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:27:48.339] DML res1: 0 [2025-09-23 20:27:48.776] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:27:48.776] Read Success [2025-09-23 20:27:48.776] Verifying certificate... [2025-09-23 20:27:49.016] Verified OK [2025-09-23 20:27:49.032] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:27:50.535] Verified OK [2025-09-23 20:27:50.556] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:27:51.143] Verified OK [2025-09-23 20:27:51.143] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:27:53.942] fs.protected_hardlinks = 1 [2025-09-23 20:27:53.970] fs.protected_symlinks = 1 [2025-09-23 20:27:53.970] kernel.modules_disabled = 1 [2025-09-23 20:27:54.146] [2025-09-23 20:27:54.146] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:27:55.468] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:27:57.745] SBL1:1210.0.1.0 [2025-09-23 20:28:03.213] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:28:04.780] SBL2:1210.0.1.0 [2025-09-23 20:28:04.828] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:28:04.923] j-A [2025-09-23 20:28:12.277] The R5 Autosar Classic is running [2025-09-23 20:28:12.300] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:28:12.300] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:28:12.907] INIT: version 2.96 booting [2025-09-23 20:28:13.020] INIT: Entering runlevel: 5 [2025-09-23 20:28:13.163] mtd28 attached [2025-09-23 20:28:13.179] mtd24 attached [2025-09-23 20:28:13.195] mtd32 attached [2025-09-23 20:28:13.243] ubi0:animations is mounted. [2025-09-23 20:28:13.243] RTNETLINK answers: File exists [2025-09-23 20:28:13.303] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:28:13.303] ubi1:textures is mounted. [2025-09-23 20:28:13.303] ubi2:dml_code is mounted. [2025-09-23 20:28:13.303] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:28:13.303] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:28:13.303] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:28:13.303] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:28:13.303] data.LB_FadeInType0=100 [2025-09-23 20:28:13.303] data.CHLH_FadeInType0=0 [2025-09-23 20:28:13.303] data.WU_FadeInDelay=0 [2025-09-23 20:28:13.303] max_time_out=0 [2025-09-23 20:28:13.303] No splash screen [2025-09-23 20:28:13.303] stop dss Done [2025-09-23 20:28:13.352] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:28:13.352] /dev/mem opened. [2025-09-23 20:28:13.383] Memory mapped at address 0xffff857df000. [2025-09-23 20:28:13.383] Read at address 0x00600018 (0xffff857df018): 0x00000000 [2025-09-23 20:28:13.383] Write at address 0x00600018 (0xffff857df018): 0x00400040, readback 0x00400040 [2025-09-23 20:28:13.383] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:28:13.543] Loaded PowerVR consumer services. [2025-09-23 20:28:13.639] Waiting data available... [2025-09-23 20:28:13.639] 512+0 records in [2025-09-23 20:28:13.639] 512+0 records out [2025-09-23 20:28:13.687] Starting syslogd/klogd: done [2025-09-23 20:28:13.703] DML Start [2025-09-23 20:28:13.846] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:28:14.055] DML res1: 0 [2025-09-23 20:28:14.548] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:28:14.548] Read Success [2025-09-23 20:28:14.548] Verifying certificate... [2025-09-23 20:28:14.788] Verified OK [2025-09-23 20:28:14.820] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:28:16.491] Verified OK [2025-09-23 20:28:16.491] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:28:17.114] Verified OK [2025-09-23 20:28:17.114] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:28:19.785] fs.protected_hardlinks = 1 [2025-09-23 20:28:19.785] fs.protected_symlinks = 1 [2025-09-23 20:28:19.801] kernel.modules_disabled = 1 [2025-09-23 20:28:19.976] [2025-09-23 20:28:19.976] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:28:21.170] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:28:28.897] SBL1:1210.0.1.0 [2025-09-23 20:28:28.945] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:28:30.512] SBL2:1210.0.1.0 [2025-09-23 20:28:30.560] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:28:30.656] j-A [2025-09-23 20:28:38.009] The R5 Autosar Classic is running [2025-09-23 20:28:38.032] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:28:38.032] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:28:38.639] INIT: version 2.96 booting [2025-09-23 20:28:38.752] INIT: Entering runlevel: 5 [2025-09-23 20:28:38.896] mtd24 attached [2025-09-23 20:28:38.912] mtd28 attached [2025-09-23 20:28:38.928] mtd32 attached [2025-09-23 20:28:38.975] RTNETLINK answers: File exists [2025-09-23 20:28:38.975] ubi0:textures is mounted. [2025-09-23 20:28:39.012] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:28:39.012] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:28:39.012] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:28:39.012] ubi1:animations is mounted. [2025-09-23 20:28:39.012] ubi2:dml_code is mounted. [2025-09-23 20:28:39.012] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:28:39.012] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:28:39.041] data.LB_FadeInType0=100 [2025-09-23 20:28:39.041] data.CHLH_FadeInType0=0 [2025-09-23 20:28:39.041] data.WU_FadeInDelay=0 [2025-09-23 20:28:39.041] max_time_out=0 [2025-09-23 20:28:39.041] No splash screen [2025-09-23 20:28:39.041] stop dss Done [2025-09-23 20:28:39.069] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:28:39.069] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:28:39.101] /dev/mem opened. [2025-09-23 20:28:39.101] Memory mapped at address 0xffff971f1000. [2025-09-23 20:28:39.127] Read at address 0x00600018 (0xffff971f1018): 0x00000000 [2025-09-23 20:28:39.127] Write at address 0x00600018 (0xffff971f1018): 0x00400040, readback 0x00400040 [2025-09-23 20:28:39.223] Loaded PowerVR consumer services. [2025-09-23 20:28:39.335] Waiting data available... [2025-09-23 20:28:39.356] 512+0 records in [2025-09-23 20:28:39.356] 512+0 records out [2025-09-23 20:28:39.372] Starting syslogd/klogd: done [2025-09-23 20:28:39.388] DML Start [2025-09-23 20:28:39.580] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:28:39.804] DML res1: 0 [2025-09-23 20:28:40.219] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:28:40.235] Read Success [2025-09-23 20:28:40.235] Verifying certificate... [2025-09-23 20:28:40.475] Verified OK [2025-09-23 20:28:40.491] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:28:42.186] Verified OK [2025-09-23 20:28:42.201] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:28:42.894] Verified OK [2025-09-23 20:28:42.894] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:28:45.565] fs.protected_hardlinks = 1 [2025-09-23 20:28:45.592] fs.protected_symlinks = 1 [2025-09-23 20:28:45.592] kernel.modules_disabled = 1 [2025-09-23 20:28:45.783] [2025-09-23 20:28:45.783] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:28:46.883] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:28:54.636] SBL1:1210.0.1.0 [2025-09-23 20:28:54.684] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:28:56.251] SBL2:1210.0.1.0 [2025-09-23 20:28:56.283] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:28:56.395] j-A [2025-09-23 20:29:03.768] The R5 Autosar Classic is running [2025-09-23 20:29:03.768] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:29:03.768] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:29:04.376] INIT: version 2.96 booting [2025-09-23 20:29:04.471] INIT: Entering runlevel: 5 [2025-09-23 20:29:04.632] mtd28 attached [2025-09-23 20:29:04.648] mtd24 attached [2025-09-23 20:29:04.664] mtd32 attached [2025-09-23 20:29:04.680] ubi0:animations is mounted. [2025-09-23 20:29:04.696] ubi1:textures is mounted. [2025-09-23 20:29:04.712] RTNETLINK answers: File exists [2025-09-23 20:29:04.712] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:29:04.740] ubi2:dml_code is mounted. [2025-09-23 20:29:04.740] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:29:04.740] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:29:04.740] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:29:04.767] data.LB_FadeInType0=100 [2025-09-23 20:29:04.767] data.CHLH_FadeInType0=0 [2025-09-23 20:29:04.767] data.WU_FadeInDelay=0 [2025-09-23 20:29:04.767] max_time_out=0 [2025-09-23 20:29:04.767] No splash screen [2025-09-23 20:29:04.767] stop dss Done [2025-09-23 20:29:04.767] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:29:04.799] /dev/mem opened. [2025-09-23 20:29:04.799] Memory mapped at address 0xffffba72c000. [2025-09-23 20:29:04.825] Read at address 0x00600018 (0xffffba72c018): 0x00000000 [2025-09-23 20:29:04.825] Write at address 0x00600018 (0xffffba72c018): 0x00400040, readback 0x00400040 [2025-09-23 20:29:04.857] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:29:04.873] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:29:05.033] Loaded PowerVR consumer services. [2025-09-23 20:29:05.096] Waiting data available... [2025-09-23 20:29:05.096] 512+0 records in [2025-09-23 20:29:05.096] 512+0 records out [2025-09-23 20:29:05.144] Starting syslogd/klogd: done [2025-09-23 20:29:05.160] DML Start [2025-09-23 20:29:05.336] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:29:05.528] DML res1: 0 [2025-09-23 20:29:06.024] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:29:06.039] Read Success [2025-09-23 20:29:06.039] Verifying certificate... [2025-09-23 20:29:06.263] Verified OK [2025-09-23 20:29:06.279] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:29:07.878] Verified OK [2025-09-23 20:29:07.878] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:29:08.485] Verified OK [2025-09-23 20:29:08.501] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:29:10.979] fs.protected_hardlinks = 1 [2025-09-23 20:29:10.995] fs.protected_symlinks = 1 [2025-09-23 20:29:10.995] kernel.modules_disabled = 1 [2025-09-23 20:29:11.203] [2025-09-23 20:29:11.203] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:29:12.641] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:29:20.391] SBL1:1210.0.1.0 [2025-09-23 20:29:20.439] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:29:22.006] SBL2:1210.0.1.0 [2025-09-23 20:29:22.053] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 20:29:22.150] j-A [2025-09-23 20:29:29.505] The R5 Autosar Classic is running [2025-09-23 20:29:29.505] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:29:29.526] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:29:30.134] INIT: version 2.96 booting [2025-09-23 20:29:30.245] INIT: Entering runlevel: 5 [2025-09-23 20:29:30.405] mtd32 attached [2025-09-23 20:29:30.405] mtd24 attached [2025-09-23 20:29:30.421] mtd28 attached [2025-09-23 20:29:30.469] RTNETLINK answers: File exists [2025-09-23 20:29:30.536] ubi0:dml_code is mounted. [2025-09-23 20:29:30.536] ubi2:animations is mounted. [2025-09-23 20:29:30.536] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:29:30.536] ubi1:textures is mounted. [2025-09-23 20:29:30.536] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:29:30.536] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:29:30.536] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:29:30.536] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:29:30.536] data.LB_FadeInType0=100 [2025-09-23 20:29:30.536] data.CHLH_FadeInType0=0 [2025-09-23 20:29:30.536] data.WU_FadeInDelay=0 [2025-09-23 20:29:30.536] max_time_out=0 [2025-09-23 20:29:30.536] No splash screen [2025-09-23 20:29:30.536] stop dss Done [2025-09-23 20:29:30.628] /dev/mem opened. [2025-09-23 20:29:30.628] Memory mapped at address 0xffffa2cd9000. [2025-09-23 20:29:30.628] Read at address 0x00600018 (0xffffa2cd9018): 0x00000000 [2025-09-23 20:29:30.628] Write at address 0x00600018 (0xffffa2cd9018): 0x00400040, readback 0x00400040 [2025-09-23 20:29:30.628] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:29:30.628] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:29:30.805] Loaded PowerVR consumer services. [2025-09-23 20:29:30.866] 512+0 records in [2025-09-23 20:29:30.866] 512+0 records out [2025-09-23 20:29:30.866] Waiting data available... [2025-09-23 20:29:30.898] Starting syslogd/klogd: done [2025-09-23 20:29:30.913] DML Start [2025-09-23 20:29:31.090] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:29:31.314] DML res1: 0 [2025-09-23 20:29:31.784] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:29:31.784] Read Success [2025-09-23 20:29:31.784] Verifying certificate... [2025-09-23 20:29:32.072] Verified OK [2025-09-23 20:29:32.088] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:29:33.734] Verified OK [2025-09-23 20:29:33.734] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:29:34.322] Verified OK [2025-09-23 20:29:34.322] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:29:37.025] fs.protected_hardlinks = 1 [2025-09-23 20:29:37.025] fs.protected_symlinks = 1 [2025-09-23 20:29:37.041] kernel.modules_disabled = 1 [2025-09-23 20:29:37.233] [2025-09-23 20:29:37.233] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:29:38.396] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:29:46.105] SBL1:1210.0.1.0 [2025-09-23 20:29:46.153] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:29:47.720] SBL2:1210.0.1.0 [2025-09-23 20:29:47.752] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:29:47.863] j-A [2025-09-23 20:29:55.239] The R5 Autosar Classic is running [2025-09-23 20:29:55.239] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:29:55.239] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:29:55.845] INIT: version 2.96 booting [2025-09-23 20:29:55.958] INIT: Entering runlevel: 5 [2025-09-23 20:29:56.101] mtd24 attached [2025-09-23 20:29:56.117] mtd28 attached [2025-09-23 20:29:56.133] mtd32 attached [2025-09-23 20:29:56.149] ubi0:textures is mounted. [2025-09-23 20:29:56.181] RTNETLINK answers: File exists [2025-09-23 20:29:56.239] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:29:56.239] ubi2:dml_code is mounted. [2025-09-23 20:29:56.239] ubi1:animations is mounted. [2025-09-23 20:29:56.239] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:29:56.239] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:29:56.239] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:29:56.239] data.LB_FadeInType0=100 [2025-09-23 20:29:56.239] data.CHLH_FadeInType0=0 [2025-09-23 20:29:56.239] data.WU_FadeInDelay=0 [2025-09-23 20:29:56.239] max_time_out=0 [2025-09-23 20:29:56.239] No splash screen [2025-09-23 20:29:56.239] stop dss Done [2025-09-23 20:29:56.239] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:29:56.311] /dev/mem opened. [2025-09-23 20:29:56.311] Memory mapped at address 0xffffb0165000. [2025-09-23 20:29:56.311] Read at address 0x00600018 (0xffffb0165018): 0x00000000 [2025-09-23 20:29:56.311] Write at address 0x00600018 (0xffffb0165018): 0x00400040, readback 0x00400040 [2025-09-23 20:29:56.343] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:29:56.359] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:29:56.534] Loaded PowerVR consumer services. [2025-09-23 20:29:56.566] 512+0 records in [2025-09-23 20:29:56.566] 512+0 records out [2025-09-23 20:29:56.599] Waiting data available... [2025-09-23 20:29:56.615] Starting syslogd/klogd: done [2025-09-23 20:29:56.631] DML Start [2025-09-23 20:29:56.822] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:29:57.046] DML res1: 0 [2025-09-23 20:29:57.505] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:29:57.505] Read Success [2025-09-23 20:29:57.505] Verifying certificate... [2025-09-23 20:29:57.729] Verified OK [2025-09-23 20:29:57.761] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:29:59.341] Verified OK [2025-09-23 20:29:59.341] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:29:59.974] Verified OK [2025-09-23 20:29:59.974] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:30:02.676] fs.protected_hardlinks = 1 [2025-09-23 20:30:02.692] fs.protected_symlinks = 1 [2025-09-23 20:30:02.692] kernel.modules_disabled = 1 [2025-09-23 20:30:02.900] [2025-09-23 20:30:02.900] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:30:04.131] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:30:11.817] SBL1:1210.0.1.0 [2025-09-23 20:30:11.865] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:30:13.431] SBL2:1210.0.1.0 [2025-09-23 20:30:13.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:30:13.576] j-A [2025-09-23 20:30:20.931] The R5 Autosar Classic is running [2025-09-23 20:30:20.952] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:30:20.952] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:30:21.560] INIT: version 2.96 booting [2025-09-23 20:30:21.671] INIT: Entering runlevel: 5 [2025-09-23 20:30:21.831] mtd28 attached [2025-09-23 20:30:21.847] mtd32 attached [2025-09-23 20:30:21.847] mtd24 attached [2025-09-23 20:30:21.880] ubi0:animations is mounted. [2025-09-23 20:30:21.896] RTNETLINK answers: File exists [2025-09-23 20:30:21.896] ubi1:dml_code is mounted. [2025-09-23 20:30:21.951] ubi2:textures is mounted. [2025-09-23 20:30:21.951] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:30:21.951] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:30:21.951] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:30:21.951] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:30:21.951] data.LB_FadeInType0=100 [2025-09-23 20:30:21.951] data.CHLH_FadeInType0=0 [2025-09-23 20:30:21.951] data.WU_FadeInDelay=0 [2025-09-23 20:30:21.951] max_time_out=0 [2025-09-23 20:30:21.951] No splash screen [2025-09-23 20:30:21.951] stop dss Done [2025-09-23 20:30:21.951] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:30:22.017] /dev/mem opened. [2025-09-23 20:30:22.017] Memory mapped at address 0xffffbab92000. [2025-09-23 20:30:22.017] Read at address 0x00600018 (0xffffbab92018): 0x00000000 [2025-09-23 20:30:22.017] Write at address 0x00600018 (0xffffbab92018): 0x00400040, readback 0x00400040 [2025-09-23 20:30:22.017] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:30:22.033] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:30:22.177] Loaded PowerVR consumer services. [2025-09-23 20:30:22.273] Waiting data available... [2025-09-23 20:30:22.289] 512+0 records in [2025-09-23 20:30:22.289] 512+0 records out [2025-09-23 20:30:22.321] Starting syslogd/klogd: done [2025-09-23 20:30:22.337] DML Start [2025-09-23 20:30:22.497] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:30:22.737] DML res1: 0 [2025-09-23 20:30:23.193] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:30:23.193] Read Success [2025-09-23 20:30:23.193] Verifying certificate... [2025-09-23 20:30:23.401] Verified OK [2025-09-23 20:30:23.417] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:30:24.882] Verified OK [2025-09-23 20:30:24.882] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:30:25.577] Verified OK [2025-09-23 20:30:25.577] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:30:28.311] fs.protected_hardlinks = 1 [2025-09-23 20:30:28.311] fs.protected_symlinks = 1 [2025-09-23 20:30:28.327] kernel.modules_disabled = 1 [2025-09-23 20:30:28.518] [2025-09-23 20:30:28.518] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:30:29.835] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:30:37.541] SBL1:1210.0.1.0 [2025-09-23 20:30:37.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:30:39.155] SBL2:1210.0.1.0 [2025-09-23 20:30:39.203] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:30:39.300] j-A [2025-09-23 20:30:46.656] The R5 Autosar Classic is running [2025-09-23 20:30:46.656] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:30:46.677] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:30:47.284] INIT: version 2.96 booting [2025-09-23 20:30:47.396] INIT: Entering runlevel: 5 [2025-09-23 20:30:47.539] mtd24 attached [2025-09-23 20:30:47.555] mtd32 attached [2025-09-23 20:30:47.572] mtd28 attached [2025-09-23 20:30:47.675] ubi1:dml_code is mounted. [2025-09-23 20:30:47.675] RTNETLINK answers: File exists [2025-09-23 20:30:47.675] ubi0:textures is mounted. [2025-09-23 20:30:47.675] ubi2:animations is mounted. [2025-09-23 20:30:47.675] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:30:47.675] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:30:47.675] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:30:47.675] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:30:47.675] data.LB_FadeInType0=100 [2025-09-23 20:30:47.675] data.CHLH_FadeInType0=0 [2025-09-23 20:30:47.675] data.WU_FadeInDelay=0 [2025-09-23 20:30:47.675] max_time_out=0 [2025-09-23 20:30:47.675] No splash screen [2025-09-23 20:30:47.675] stop dss Done [2025-09-23 20:30:47.675] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:30:47.723] /dev/mem opened. [2025-09-23 20:30:47.723] Memory mapped at address 0xffffb805c000. [2025-09-23 20:30:47.761] Read at address 0x00600018 (0xffffb805c018): 0x00000000 [2025-09-23 20:30:47.761] Write at address 0x00600018 (0xffffb805c018): 0x00400040, readback 0x00400040 [2025-09-23 20:30:47.761] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:30:47.761] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:30:47.969] Loaded PowerVR consumer services. [2025-09-23 20:30:47.985] 512+0 records in [2025-09-23 20:30:48.001] 512+0 records out [2025-09-23 20:30:48.033] Starting syslogd/klogd: done [2025-09-23 20:30:48.049] Waiting data available... [2025-09-23 20:30:48.049] DML Start [2025-09-23 20:30:48.224] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:30:48.480] DML res1: 0 [2025-09-23 20:30:48.885] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:30:48.885] Read Success [2025-09-23 20:30:48.885] Verifying certificate... [2025-09-23 20:30:49.141] Verified OK [2025-09-23 20:30:49.157] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:30:50.734] Verified OK [2025-09-23 20:30:50.734] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:30:51.389] Verified OK [2025-09-23 20:30:51.389] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:30:54.074] fs.protected_hardlinks = 1 [2025-09-23 20:30:54.074] fs.protected_symlinks = 1 [2025-09-23 20:30:54.074] kernel.modules_disabled = 1 [2025-09-23 20:30:54.267] [2025-09-23 20:30:54.267] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:30:55.541] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:31:03.272] SBL1:1210.0.1.0 [2025-09-23 20:31:03.320] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:31:04.886] SBL2:1210.0.1.0 [2025-09-23 20:31:04.934] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:31:05.031] j-A [2025-09-23 20:31:12.386] The R5 Autosar Classic is running [2025-09-23 20:31:12.409] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:31:12.409] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:31:13.016] INIT: version 2.96 booting [2025-09-23 20:31:13.129] INIT: Entering runlevel: 5 [2025-09-23 20:31:13.272] mtd24 attached [2025-09-23 20:31:13.288] mtd28 attached [2025-09-23 20:31:13.304] mtd32 attached [2025-09-23 20:31:13.336] ubi0:textures is mounted. [2025-09-23 20:31:13.352] RTNETLINK answers: File exists [2025-09-23 20:31:13.409] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:31:13.409] ubi1:animations is mounted. [2025-09-23 20:31:13.409] ubi2:dml_code is mounted. [2025-09-23 20:31:13.409] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:31:13.409] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:31:13.409] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:31:13.409] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:31:13.409] data.LB_FadeInType0=100 [2025-09-23 20:31:13.409] data.CHLH_FadeInType0=0 [2025-09-23 20:31:13.409] data.WU_FadeInDelay=0 [2025-09-23 20:31:13.409] max_time_out=0 [2025-09-23 20:31:13.409] No splash screen [2025-09-23 20:31:13.409] stop dss Done [2025-09-23 20:31:13.441] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:31:13.457] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:31:13.493] /dev/mem opened. [2025-09-23 20:31:13.493] Memory mapped at address 0xffffa8efc000. [2025-09-23 20:31:13.493] Read at address 0x00600018 (0xffffa8efc018): 0x00000000 [2025-09-23 20:31:13.493] Write at address 0x00600018 (0xffffa8efc018): 0x00400040, readback 0x00400040 [2025-09-23 20:31:13.701] Loaded PowerVR consumer services. [2025-09-23 20:31:13.733] 512+0 records in [2025-09-23 20:31:13.733] 512+0 records out [2025-09-23 20:31:13.764] Starting syslogd/klogd: done [2025-09-23 20:31:13.797] Waiting data available... [2025-09-23 20:31:13.797] DML Start [2025-09-23 20:31:13.989] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:31:14.213] DML res1: 0 [2025-09-23 20:31:14.624] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:31:14.624] Read Success [2025-09-23 20:31:14.624] Verifying certificate... [2025-09-23 20:31:14.896] Verified OK [2025-09-23 20:31:14.912] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:31:16.488] Verified OK [2025-09-23 20:31:16.488] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:31:17.047] Verified OK [2025-09-23 20:31:17.068] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:31:19.835] fs.protected_hardlinks = 1 [2025-09-23 20:31:19.851] fs.protected_symlinks = 1 [2025-09-23 20:31:19.851] kernel.modules_disabled = 1 [2025-09-23 20:31:20.042] [2025-09-23 20:31:20.042] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:31:21.322] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:31:29.018] SBL1:1210.0.1.0 [2025-09-23 20:31:29.050] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:31:30.618] SBL2:1210.0.1.0 [2025-09-23 20:31:30.666] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:31:30.761] j-A [2025-09-23 20:31:38.115] The R5 Autosar Classic is running [2025-09-23 20:31:38.140] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:31:38.140] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:31:38.748] INIT: version 2.96 booting [2025-09-23 20:31:38.860] INIT: Entering runlevel: 5 [2025-09-23 20:31:39.004] mtd24 attached [2025-09-23 20:31:39.020] mtd28 attached [2025-09-23 20:31:39.036] mtd32 attached [2025-09-23 20:31:39.052] ubi0:textures is mounted. [2025-09-23 20:31:39.084] RTNETLINK answers: File exists [2025-09-23 20:31:39.084] ubi2:dml_code is mounted. [2025-09-23 20:31:39.140] ubi1:animations is mounted. [2025-09-23 20:31:39.140] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:31:39.140] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:31:39.140] data.LB_FadeInType0=100 [2025-09-23 20:31:39.140] data.CHLH_FadeInType0=0 [2025-09-23 20:31:39.140] data.WU_FadeInDelay=0 [2025-09-23 20:31:39.140] max_time_out=0 [2025-09-23 20:31:39.140] No splash screen [2025-09-23 20:31:39.140] stop dss Done [2025-09-23 20:31:39.140] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:31:39.140] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:31:39.140] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:31:39.172] /dev/mem opened. [2025-09-23 20:31:39.172] Memory mapped at address 0xffff847c8000. [2025-09-23 20:31:39.213] Read at address 0x00600018 (0xffff847c8018): 0x00000000 [2025-09-23 20:31:39.213] Write at address 0x00600018 (0xffff847c8018): 0x00400040, readback 0x00400040 [2025-09-23 20:31:39.213] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:31:39.213] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:31:39.324] Loaded PowerVR consumer services. [2025-09-23 20:31:39.468] Waiting data available... [2025-09-23 20:31:39.468] 512+0 records in [2025-09-23 20:31:39.468] 512+0 records out [2025-09-23 20:31:39.484] Starting syslogd/klogd: done [2025-09-23 20:31:39.500] DML Start [2025-09-23 20:31:39.691] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:31:39.963] DML res1: 0 [2025-09-23 20:31:40.289] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:31:40.289] Read Success [2025-09-23 20:31:40.289] Verifying certificate... [2025-09-23 20:31:40.529] Verified OK [2025-09-23 20:31:40.545] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:31:42.217] Verified OK [2025-09-23 20:31:42.217] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:31:42.817] Verified OK [2025-09-23 20:31:42.817] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:31:45.536] fs.protected_hardlinks = 1 [2025-09-23 20:31:45.536] fs.protected_symlinks = 1 [2025-09-23 20:31:45.551] kernel.modules_disabled = 1 [2025-09-23 20:31:45.727] [2025-09-23 20:31:45.727] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:31:47.046] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:31:54.739] SBL1:1210.0.1.0 [2025-09-23 20:31:54.787] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:31:56.353] SBL2:1210.0.1.0 [2025-09-23 20:31:56.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:31:56.497] j-A [2025-09-23 20:32:03.851] The R5 Autosar Classic is running [2025-09-23 20:32:03.851] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:32:03.871] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:32:04.480] INIT: version 2.96 booting [2025-09-23 20:32:04.591] INIT: Entering runlevel: 5 [2025-09-23 20:32:04.752] mtd32 attached [2025-09-23 20:32:04.752] mtd28 attached [2025-09-23 20:32:04.768] mtd24 attached [2025-09-23 20:32:04.815] RTNETLINK answers: File exists [2025-09-23 20:32:04.815] ubi0:dml_code is mounted. [2025-09-23 20:32:04.857] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:32:04.857] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:32:04.857] ubi2:textures is mounted. [2025-09-23 20:32:04.857] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:32:04.857] ubi1:animations is mounted. [2025-09-23 20:32:04.857] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:32:04.857] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:32:04.886] data.LB_FadeInType0=100 [2025-09-23 20:32:04.886] data.CHLH_FadeInType0=0 [2025-09-23 20:32:04.886] data.WU_FadeInDelay=0 [2025-09-23 20:32:04.886] max_time_out=0 [2025-09-23 20:32:04.886] No splash screen [2025-09-23 20:32:04.886] stop dss Done [2025-09-23 20:32:04.929] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:32:04.929] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:32:04.929] /dev/mem opened. [2025-09-23 20:32:04.929] Memory mapped at address 0xffff8f91e000. [2025-09-23 20:32:04.955] Read at address 0x00600018 (0xffff8f91e018): 0x00000000 [2025-09-23 20:32:04.955] Write at address 0x00600018 (0xffff8f91e018): 0x00400040, readback 0x00400040 [2025-09-23 20:32:05.067] Loaded PowerVR consumer services. [2025-09-23 20:32:05.204] 512+0 records in [2025-09-23 20:32:05.204] 512+0 records out [2025-09-23 20:32:05.204] Waiting data available... [2025-09-23 20:32:05.220] Starting syslogd/klogd: done [2025-09-23 20:32:05.236] DML Start [2025-09-23 20:32:05.412] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:32:05.652] DML res1: 0 [2025-09-23 20:32:06.111] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:32:06.111] Read Success [2025-09-23 20:32:06.111] Verifying certificate... [2025-09-23 20:32:06.351] Verified OK [2025-09-23 20:32:06.367] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:32:08.141] Verified OK [2025-09-23 20:32:08.141] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:32:08.821] Verified OK [2025-09-23 20:32:08.821] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:32:11.316] fs.protected_hardlinks = 1 [2025-09-23 20:32:11.332] fs.protected_symlinks = 1 [2025-09-23 20:32:11.347] kernel.modules_disabled = 1 [2025-09-23 20:32:11.539] [2025-09-23 20:32:11.539] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:32:12.728] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:32:20.457] SBL1:1210.0.1.0 [2025-09-23 20:32:20.505] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:32:22.072] SBL2:1210.0.1.0 [2025-09-23 20:32:22.104] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:32:22.215] j-A [2025-09-23 20:32:29.570] The R5 Autosar Classic is running [2025-09-23 20:32:29.570] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:32:29.591] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:32:30.198] INIT: version 2.96 booting [2025-09-23 20:32:30.310] INIT: Entering runlevel: 5 [2025-09-23 20:32:30.454] mtd28 attached [2025-09-23 20:32:30.470] mtd24 attached [2025-09-23 20:32:30.470] mtd32 attached [2025-09-23 20:32:30.534] RTNETLINK answers: File exists [2025-09-23 20:32:30.534] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:32:30.594] ubi0:animations is mounted. [2025-09-23 20:32:30.594] ubi1:textures is mounted. [2025-09-23 20:32:30.594] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:32:30.594] ubi2:dml_code is mounted. [2025-09-23 20:32:30.594] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:32:30.594] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:32:30.594] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:32:30.594] data.LB_FadeInType0=100 [2025-09-23 20:32:30.594] data.CHLH_FadeInType0=0 [2025-09-23 20:32:30.594] data.WU_FadeInDelay=0 [2025-09-23 20:32:30.594] max_time_out=0 [2025-09-23 20:32:30.594] No splash screen [2025-09-23 20:32:30.594] stop dss Done [2025-09-23 20:32:30.626] /dev/mem opened. [2025-09-23 20:32:30.626] Memory mapped at address 0xffffa73ef000. [2025-09-23 20:32:30.663] Read at address 0x00600018 (0xffffa73ef018): 0x00000000 [2025-09-23 20:32:30.663] Write at address 0x00600018 (0xffffa73ef018): 0x00400040, readback 0x00400040 [2025-09-23 20:32:30.663] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:32:30.663] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:32:30.759] Loaded PowerVR consumer services. [2025-09-23 20:32:30.917] 512+0 records in [2025-09-23 20:32:30.917] 512+0 records out [2025-09-23 20:32:30.917] Waiting data available... [2025-09-23 20:32:30.933] Starting syslogd/klogd: done [2025-09-23 20:32:30.949] DML Start [2025-09-23 20:32:31.109] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:32:31.349] DML res1: 0 [2025-09-23 20:32:31.780] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:32:31.796] Read Success [2025-09-23 20:32:31.796] Verifying certificate... [2025-09-23 20:32:32.052] Verified OK [2025-09-23 20:32:32.068] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:32:33.594] Verified OK [2025-09-23 20:32:33.594] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:32:34.226] Verified OK [2025-09-23 20:32:34.226] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:32:37.056] fs.protected_hardlinks = 1 [2025-09-23 20:32:37.056] fs.protected_symlinks = 1 [2025-09-23 20:32:37.073] kernel.modules_disabled = 1 [2025-09-23 20:32:37.264] [2025-09-23 20:32:37.264] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:32:38.446] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:32:46.198] SBL1:1210.0.1.0 [2025-09-23 20:32:46.246] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:32:47.814] SBL2:1210.0.1.0 [2025-09-23 20:32:47.845] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:32:47.958] j-A [2025-09-23 20:32:55.331] The R5 Autosar Classic is running [2025-09-23 20:32:55.331] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:32:55.331] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:32:55.939] INIT: version 2.96 booting [2025-09-23 20:32:56.051] INIT: Entering runlevel: 5 [2025-09-23 20:32:56.195] mtd28 attached [2025-09-23 20:32:56.211] mtd24 attached [2025-09-23 20:32:56.226] mtd32 attached [2025-09-23 20:32:56.328] ubi0:animations is mounted. [2025-09-23 20:32:56.328] ubi1:textures is mounted. [2025-09-23 20:32:56.328] RTNETLINK answers: File exists [2025-09-23 20:32:56.328] ubi2:dml_code is mounted. [2025-09-23 20:32:56.328] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:32:56.328] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:32:56.328] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:32:56.328] data.LB_FadeInType0=100 [2025-09-23 20:32:56.328] data.CHLH_FadeInType0=0 [2025-09-23 20:32:56.328] data.WU_FadeInDelay=0 [2025-09-23 20:32:56.328] max_time_out=0 [2025-09-23 20:32:56.328] No splash screen [2025-09-23 20:32:56.328] stop dss Done [2025-09-23 20:32:56.328] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:32:56.328] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:32:56.401] /dev/mem opened. [2025-09-23 20:32:56.401] Memory mapped at address 0xffffa72ec000. [2025-09-23 20:32:56.401] Read at address 0x00600018 (0xffffa72ec018): 0x00000000 [2025-09-23 20:32:56.401] Write at address 0x00600018 (0xffffa72ec018): 0x00400040, readback 0x00400040 [2025-09-23 20:32:56.433] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:32:56.449] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:32:56.546] Loaded PowerVR consumer services. [2025-09-23 20:32:56.670] 512+0 records in [2025-09-23 20:32:56.670] 512+0 records out [2025-09-23 20:32:56.670] Waiting data available... [2025-09-23 20:32:56.702] Starting syslogd/klogd: done [2025-09-23 20:32:56.718] DML Start [2025-09-23 20:32:56.894] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:32:57.134] DML res1: 0 [2025-09-23 20:32:57.582] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:32:57.604] Read Success [2025-09-23 20:32:57.604] Verifying certificate... [2025-09-23 20:32:57.859] Verified OK [2025-09-23 20:32:57.875] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:32:59.377] Verified OK [2025-09-23 20:32:59.377] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:33:00.002] Verified OK [2025-09-23 20:33:00.002] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:33:02.768] fs.protected_hardlinks = 1 [2025-09-23 20:33:02.768] fs.protected_symlinks = 1 [2025-09-23 20:33:02.784] kernel.modules_disabled = 1 [2025-09-23 20:33:02.976] [2025-09-23 20:33:02.976] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:33:04.223] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:33:11.943] SBL1:1210.0.1.0 [2025-09-23 20:33:11.975] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:33:13.558] SBL2:1210.0.1.0 [2025-09-23 20:33:13.590] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 20:33:13.703] j-A [2025-09-23 20:33:21.041] The R5 Autosar Classic is running [2025-09-23 20:33:21.066] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:33:21.066] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:33:21.673] INIT: version 2.96 booting [2025-09-23 20:33:21.785] INIT: Entering runlevel: 5 [2025-09-23 20:33:21.944] mtd32 attached [2025-09-23 20:33:21.944] mtd28 attached [2025-09-23 20:33:21.960] mtd24 attached [2025-09-23 20:33:22.009] RTNETLINK answers: File exists [2025-09-23 20:33:22.009] ubi0:dml_code is mounted. [2025-09-23 20:33:22.052] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:33:22.052] ubi1:animations is mounted. [2025-09-23 20:33:22.052] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:33:22.052] ubi2:textures is mounted. [2025-09-23 20:33:22.052] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:33:22.052] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:33:22.052] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:33:22.052] data.LB_FadeInType0=100 [2025-09-23 20:33:22.052] data.CHLH_FadeInType0=0 [2025-09-23 20:33:22.073] data.WU_FadeInDelay=0 [2025-09-23 20:33:22.073] max_time_out=0 [2025-09-23 20:33:22.073] No splash screen [2025-09-23 20:33:22.073] stop dss Done [2025-09-23 20:33:22.105] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:33:22.145] /dev/mem opened. [2025-09-23 20:33:22.145] Memory mapped at address 0xffffa2e96000. [2025-09-23 20:33:22.145] Read at address 0x00600018 (0xffffa2e96018): 0x00000000 [2025-09-23 20:33:22.145] Write at address 0x00600018 (0xffffa2e96018): 0x00400040, readback 0x00400040 [2025-09-23 20:33:22.145] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:33:22.353] Loaded PowerVR consumer services. [2025-09-23 20:33:22.384] Waiting data available... [2025-09-23 20:33:22.400] 512+0 records in [2025-09-23 20:33:22.400] 512+0 records out [2025-09-23 20:33:22.448] Starting syslogd/klogd: done [2025-09-23 20:33:22.480] DML Start [2025-09-23 20:33:22.640] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:33:22.880] DML res1: 0 [2025-09-23 20:33:23.320] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:33:23.320] Read Success [2025-09-23 20:33:23.320] Verifying certificate... [2025-09-23 20:33:23.561] Verified OK [2025-09-23 20:33:23.592] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:33:25.313] Verified OK [2025-09-23 20:33:25.313] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:33:25.930] Verified OK [2025-09-23 20:33:25.930] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:33:28.488] fs.protected_hardlinks = 1 [2025-09-23 20:33:28.504] fs.protected_symlinks = 1 [2025-09-23 20:33:28.504] kernel.modules_disabled = 1 [2025-09-23 20:33:28.696] [2025-09-23 20:33:28.696] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:33:29.968] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:33:37.671] SBL1:1210.0.1.0 [2025-09-23 20:33:37.719] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:33:39.287] SBL2:1210.0.1.0 [2025-09-23 20:33:39.335] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:33:39.430] j-A [2025-09-23 20:33:46.786] The R5 Autosar Classic is running [2025-09-23 20:33:46.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:33:46.807] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:33:47.414] INIT: version 2.96 booting [2025-09-23 20:33:47.526] INIT: Entering runlevel: 5 [2025-09-23 20:33:47.670] mtd28 attached [2025-09-23 20:33:47.686] mtd24 attached [2025-09-23 20:33:47.702] mtd32 attached [2025-09-23 20:33:47.785] RTNETLINK answers: File exists [2025-09-23 20:33:47.785] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:33:47.785] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:33:47.785] ubi1:textures is mounted. [2025-09-23 20:33:47.785] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:33:47.785] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:33:47.785] ubi0:animations is mounted. [2025-09-23 20:33:47.785] ubi2:dml_code is mounted. [2025-09-23 20:33:47.785] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:33:47.811] data.LB_FadeInType0=100 [2025-09-23 20:33:47.811] data.CHLH_FadeInType0=0 [2025-09-23 20:33:47.811] data.WU_FadeInDelay=0 [2025-09-23 20:33:47.811] max_time_out=0 [2025-09-23 20:33:47.811] No splash screen [2025-09-23 20:33:47.811] stop dss Done [2025-09-23 20:33:47.827] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:33:47.843] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:33:47.892] /dev/mem opened. [2025-09-23 20:33:47.892] Memory mapped at address 0xffff82de9000. [2025-09-23 20:33:47.892] Read at address 0x00600018 (0xffff82de9018): 0x00000000 [2025-09-23 20:33:47.892] Write at address 0x00600018 (0xffff82de9018): 0x00400040, readback 0x00400040 [2025-09-23 20:33:47.971] Loaded PowerVR consumer services. [2025-09-23 20:33:48.116] Waiting data available... [2025-09-23 20:33:48.132] 512+0 records in [2025-09-23 20:33:48.132] 512+0 records out [2025-09-23 20:33:48.147] Starting syslogd/klogd: done [2025-09-23 20:33:48.163] DML Start [2025-09-23 20:33:48.356] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:33:48.547] DML res1: 0 [2025-09-23 20:33:49.034] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:33:49.034] Read Success [2025-09-23 20:33:49.034] Verifying certificate... [2025-09-23 20:33:49.274] Verified OK [2025-09-23 20:33:49.306] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:33:51.001] Verified OK [2025-09-23 20:33:51.001] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:33:51.592] Verified OK [2025-09-23 20:33:51.592] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:33:54.165] fs.protected_hardlinks = 1 [2025-09-23 20:33:54.165] fs.protected_symlinks = 1 [2025-09-23 20:33:54.181] kernel.modules_disabled = 1 [2025-09-23 20:33:54.373] [2025-09-23 20:33:54.373] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:33:55.659] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:34:03.420] SBL1:1210.0.1.0 [2025-09-23 20:34:03.452] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:34:05.034] SBL2:1210.0.1.0 [2025-09-23 20:34:05.066] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:34:05.178] j-A [2025-09-23 20:34:12.551] The R5 Autosar Classic is running [2025-09-23 20:34:12.551] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:34:12.551] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:34:13.159] INIT: version 2.96 booting [2025-09-23 20:34:13.270] INIT: Entering runlevel: 5 [2025-09-23 20:34:13.415] mtd24 attached [2025-09-23 20:34:13.431] mtd32 attached [2025-09-23 20:34:13.447] mtd28 attached [2025-09-23 20:34:13.463] ubi0:textures is mounted. [2025-09-23 20:34:13.495] RTNETLINK answers: File exists [2025-09-23 20:34:13.495] ubi2:animations is mounted. [2025-09-23 20:34:13.548] ubi1:dml_code is mounted. [2025-09-23 20:34:13.548] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:34:13.548] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:34:13.548] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:34:13.548] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:34:13.548] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:34:13.548] data.LB_FadeInType0=100 [2025-09-23 20:34:13.548] data.CHLH_FadeInType0=0 [2025-09-23 20:34:13.548] data.WU_FadeInDelay=0 [2025-09-23 20:34:13.548] max_time_out=0 [2025-09-23 20:34:13.548] No splash screen [2025-09-23 20:34:13.548] stop dss Done [2025-09-23 20:34:13.579] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:34:13.615] /dev/mem opened. [2025-09-23 20:34:13.615] Memory mapped at address 0xffffa6621000. [2025-09-23 20:34:13.615] Read at address 0x00600018 (0xffffa6621018): 0x00000000 [2025-09-23 20:34:13.615] Write at address 0x00600018 (0xffffa6621018): 0x00400040, readback 0x00400040 [2025-09-23 20:34:13.615] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:34:13.839] Loaded PowerVR consumer services. [2025-09-23 20:34:13.915] Waiting data available... [2025-09-23 20:34:13.915] 512+0 records in [2025-09-23 20:34:13.915] 512+0 records out [2025-09-23 20:34:13.947] Starting syslogd/klogd: done [2025-09-23 20:34:13.963] DML Start [2025-09-23 20:34:14.139] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:34:14.347] DML res1: 0 [2025-09-23 20:34:14.794] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:34:14.815] Read Success [2025-09-23 20:34:14.815] Verifying certificate... [2025-09-23 20:34:15.023] Verified OK [2025-09-23 20:34:15.039] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:34:16.714] Verified OK [2025-09-23 20:34:16.714] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:34:17.330] Verified OK [2025-09-23 20:34:17.330] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:34:19.983] fs.protected_hardlinks = 1 [2025-09-23 20:34:19.983] fs.protected_symlinks = 1 [2025-09-23 20:34:19.999] kernel.modules_disabled = 1 [2025-09-23 20:34:20.207] [2025-09-23 20:34:20.207] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:34:21.491] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:34:29.138] SBL1:1210.0.1.0 [2025-09-23 20:34:29.170] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:34:30.753] SBL2:1210.0.1.0 [2025-09-23 20:34:30.785] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:34:30.897] j-A [2025-09-23 20:34:38.236] The R5 Autosar Classic is running [2025-09-23 20:34:38.261] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:34:38.261] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:34:38.869] INIT: version 2.96 booting [2025-09-23 20:34:38.981] INIT: Entering runlevel: 5 [2025-09-23 20:34:39.141] mtd24 attached [2025-09-23 20:34:39.141] mtd28 attached [2025-09-23 20:34:39.173] ubi0:textures is mounted. [2025-09-23 20:34:39.173] mtd32 attached [2025-09-23 20:34:39.205] ubi1:animations is mounted. [2025-09-23 20:34:39.267] RTNETLINK answers: File exists [2025-09-23 20:34:39.267] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:34:39.267] ubi2:dml_code is mounted. [2025-09-23 20:34:39.267] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:34:39.267] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:34:39.267] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:34:39.267] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:34:39.267] data.LB_FadeInType0=100 [2025-09-23 20:34:39.267] data.CHLH_FadeInType0=0 [2025-09-23 20:34:39.267] data.WU_FadeInDelay=0 [2025-09-23 20:34:39.267] max_time_out=0 [2025-09-23 20:34:39.267] No splash screen [2025-09-23 20:34:39.267] stop dss Done [2025-09-23 20:34:39.314] /dev/mem opened. [2025-09-23 20:34:39.314] Memory mapped at address 0xffff8ffed000. [2025-09-23 20:34:39.340] Read at address 0x00600018 (0xffff8ffed018): 0x00000000 [2025-09-23 20:34:39.340] Write at address 0x00600018 (0xffff8ffed018): 0x00400040, readback 0x00400040 [2025-09-23 20:34:39.340] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:34:39.372] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:34:39.548] Loaded PowerVR consumer services. [2025-09-23 20:34:39.581] 512+0 records in [2025-09-23 20:34:39.581] 512+0 records out [2025-09-23 20:34:39.629] Starting syslogd/klogd: Waiting data available... [2025-09-23 20:34:39.645] done [2025-09-23 20:34:39.645] DML Start [2025-09-23 20:34:39.852] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:34:40.076] DML res1: 0 [2025-09-23 20:34:40.443] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:34:40.443] Read Success [2025-09-23 20:34:40.443] Verifying certificate... [2025-09-23 20:34:40.651] Verified OK [2025-09-23 20:34:40.667] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:34:42.401] Verified OK [2025-09-23 20:34:42.401] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:34:43.019] Verified OK [2025-09-23 20:34:43.019] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:34:45.720] fs.protected_hardlinks = 1 [2025-09-23 20:34:45.736] fs.protected_symlinks = 1 [2025-09-23 20:34:45.736] kernel.modules_disabled = 1 [2025-09-23 20:34:45.928] [2025-09-23 20:34:45.928] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:34:47.162] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:34:54.867] SBL1:1210.0.1.0 [2025-09-23 20:34:54.915] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:34:56.482] SBL2:1210.0.1.0 [2025-09-23 20:34:56.514] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:34:56.626] j-A [2025-09-23 20:35:04.000] The R5 Autosar Classic is running [2025-09-23 20:35:04.000] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:35:04.000] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:35:04.608] INIT: version 2.96 booting [2025-09-23 20:35:04.719] INIT: Entering runlevel: 5 [2025-09-23 20:35:04.864] mtd32 attached [2025-09-23 20:35:04.880] mtd28 attached [2025-09-23 20:35:04.880] mtd24 attached [2025-09-23 20:35:04.976] RTNETLINK answers: File exists [2025-09-23 20:35:04.976] ubi0:dml_code is mounted. [2025-09-23 20:35:04.976] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:35:04.976] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:35:04.976] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:35:04.976] ubi1:animations is mounted. [2025-09-23 20:35:04.976] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:35:04.976] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:35:04.976] ubi2:textures is mounted. [2025-09-23 20:35:04.997] data.LB_FadeInType0=100 [2025-09-23 20:35:04.997] data.CHLH_FadeInType0=0 [2025-09-23 20:35:04.997] data.WU_FadeInDelay=0 [2025-09-23 20:35:04.997] max_time_out=0 [2025-09-23 20:35:04.997] No splash screen [2025-09-23 20:35:04.997] stop dss Done [2025-09-23 20:35:05.044] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:35:05.044] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:35:05.076] /dev/mem opened. [2025-09-23 20:35:05.076] Memory mapped at address 0xffffaaaf6000. [2025-09-23 20:35:05.076] Read at address 0x00600018 (0xffffaaaf6018): 0x00000000 [2025-09-23 20:35:05.076] Write at address 0x00600018 (0xffffaaaf6018): 0x00400040, readback 0x00400040 [2025-09-23 20:35:05.156] Loaded PowerVR consumer services. [2025-09-23 20:35:05.324] Waiting data available... [2025-09-23 20:35:05.324] 512+0 records in [2025-09-23 20:35:05.324] 512+0 records out [2025-09-23 20:35:05.356] Starting syslogd/klogd: done [2025-09-23 20:35:05.372] DML Start [2025-09-23 20:35:05.532] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:35:05.724] DML res1: 0 [2025-09-23 20:35:06.291] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:35:06.291] Read Success [2025-09-23 20:35:06.291] Verifying certificate... [2025-09-23 20:35:06.562] Verified OK [2025-09-23 20:35:06.594] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:35:08.290] Verified OK [2025-09-23 20:35:08.290] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:35:08.873] Verified OK [2025-09-23 20:35:08.873] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:35:11.428] fs.protected_hardlinks = 1 [2025-09-23 20:35:11.428] fs.protected_symlinks = 1 [2025-09-23 20:35:11.428] kernel.modules_disabled = 1 [2025-09-23 20:35:11.603] [2025-09-23 20:35:11.604] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:35:12.862] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:35:20.610] SBL1:1210.0.1.0 [2025-09-23 20:35:20.642] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:35:22.226] SBL2:1210.0.1.0 [2025-09-23 20:35:22.258] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:35:22.369] j-A [2025-09-23 20:35:29.709] The R5 Autosar Classic is running [2025-09-23 20:35:29.734] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:35:29.734] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:35:30.341] INIT: version 2.96 booting [2025-09-23 20:35:30.454] INIT: Entering runlevel: 5 [2025-09-23 20:35:30.613] mtd28 attached [2025-09-23 20:35:30.613] mtd32 attached [2025-09-23 20:35:30.629] mtd24 attached [2025-09-23 20:35:30.677] RTNETLINK answers: File exists [2025-09-23 20:35:30.677] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:35:30.716] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:35:30.716] ubi2:textures is mounted. [2025-09-23 20:35:30.716] ubi1:dml_code is mounted. [2025-09-23 20:35:30.716] ubi0:animations is mounted. [2025-09-23 20:35:30.716] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:35:30.716] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:35:30.716] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:35:30.716] data.LB_FadeInType0=100 [2025-09-23 20:35:30.737] data.CHLH_FadeInType0=0 [2025-09-23 20:35:30.737] data.WU_FadeInDelay=0 [2025-09-23 20:35:30.737] max_time_out=0 [2025-09-23 20:35:30.737] No splash screen [2025-09-23 20:35:30.737] stop dss Done [2025-09-23 20:35:30.777] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:35:30.777] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:35:30.793] /dev/mem opened. [2025-09-23 20:35:30.793] Memory mapped at address 0xffffa9172000. [2025-09-23 20:35:30.820] Read at address 0x00600018 (0xffffa9172018): 0x00000000 [2025-09-23 20:35:30.820] Write at address 0x00600018 (0xffffa9172018): 0x00400040, readback 0x00400040 [2025-09-23 20:35:30.916] Loaded PowerVR consumer services. [2025-09-23 20:35:31.043] 512+0 records in [2025-09-23 20:35:31.043] 512+0 records out [2025-09-23 20:35:31.059] Waiting data available... [2025-09-23 20:35:31.091] Starting syslogd/klogd: done [2025-09-23 20:35:31.123] DML Start [2025-09-23 20:35:31.283] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:35:31.491] DML res1: 0 [2025-09-23 20:35:31.949] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:35:31.949] Read Success [2025-09-23 20:35:31.949] Verifying certificate... [2025-09-23 20:35:32.173] Verified OK [2025-09-23 20:35:32.189] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:35:33.816] Verified OK [2025-09-23 20:35:33.816] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:35:34.375] Verified OK [2025-09-23 20:35:34.375] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:35:37.189] fs.protected_hardlinks = 1 [2025-09-23 20:35:37.189] fs.protected_symlinks = 1 [2025-09-23 20:35:37.205] kernel.modules_disabled = 1 [2025-09-23 20:35:37.382] [2025-09-23 20:35:37.382] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:35:38.619] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:35:46.339] SBL1:1210.0.1.0 [2025-09-23 20:35:46.371] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:35:47.953] SBL2:1210.0.1.0 [2025-09-23 20:35:47.985] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:35:48.098] j-A [2025-09-23 20:35:55.436] The R5 Autosar Classic is running [2025-09-23 20:35:55.467] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:35:55.467] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:35:56.075] INIT: version 2.96 booting [2025-09-23 20:35:56.187] INIT: Entering runlevel: 5 [2025-09-23 20:35:56.331] mtd24 attached [2025-09-23 20:35:56.347] mtd28 attached [2025-09-23 20:35:56.363] mtd32 attached [2025-09-23 20:35:56.473] RTNETLINK answers: File exists [2025-09-23 20:35:56.473] ubi0:textures is mounted. [2025-09-23 20:35:56.473] ubi1:animations is mounted. [2025-09-23 20:35:56.473] ubi2:dml_code is mounted. [2025-09-23 20:35:56.473] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:35:56.473] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:35:56.473] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:35:56.473] data.LB_FadeInType0=100 [2025-09-23 20:35:56.473] data.CHLH_FadeInType0=0 [2025-09-23 20:35:56.473] data.WU_FadeInDelay=0 [2025-09-23 20:35:56.473] max_time_out=0 [2025-09-23 20:35:56.473] No splash screen [2025-09-23 20:35:56.473] stop dss Done [2025-09-23 20:35:56.473] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:35:56.473] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:35:56.538] /dev/mem opened. [2025-09-23 20:35:56.538] Memory mapped at address 0xffff83965000. [2025-09-23 20:35:56.538] Read at address 0x00600018 (0xffff83965018): 0x00000000 [2025-09-23 20:35:56.538] Write at address 0x00600018 (0xffff83965018): 0x00400040, readback 0x00400040 [2025-09-23 20:35:56.580] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:35:56.580] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:35:56.772] Loaded PowerVR consumer services. [2025-09-23 20:35:56.788] Waiting data available... [2025-09-23 20:35:56.804] 512+0 records in [2025-09-23 20:35:56.819] 512+0 records out [2025-09-23 20:35:56.835] Starting syslogd/klogd: done [2025-09-23 20:35:56.852] DML Start [2025-09-23 20:35:56.995] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:35:57.219] DML res1: 0 [2025-09-23 20:35:57.694] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:35:57.694] Read Success [2025-09-23 20:35:57.694] Verifying certificate... [2025-09-23 20:35:57.949] Verified OK [2025-09-23 20:35:57.965] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:35:59.653] Verified OK [2025-09-23 20:35:59.653] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:36:00.273] Verified OK [2025-09-23 20:36:00.273] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:36:02.880] fs.protected_hardlinks = 1 [2025-09-23 20:36:02.880] fs.protected_symlinks = 1 [2025-09-23 20:36:02.896] kernel.modules_disabled = 1 [2025-09-23 20:36:03.072] [2025-09-23 20:36:03.072] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:36:04.343] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:36:12.069] SBL1:1210.0.1.0 [2025-09-23 20:36:12.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:36:13.684] SBL2:1210.0.1.0 [2025-09-23 20:36:13.715] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:36:13.827] j-A [2025-09-23 20:36:21.195] The R5 Autosar Classic is running [2025-09-23 20:36:21.195] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:36:21.195] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:36:21.803] INIT: version 2.96 booting [2025-09-23 20:36:21.915] INIT: Entering runlevel: 5 [2025-09-23 20:36:22.075] mtd32 attached [2025-09-23 20:36:22.075] mtd24 attached [2025-09-23 20:36:22.091] mtd28 attached [2025-09-23 20:36:22.139] RTNETLINK answers: File exists [2025-09-23 20:36:22.180] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:36:22.180] ubi1:textures is mounted. [2025-09-23 20:36:22.180] ubi0:dml_code is mounted. [2025-09-23 20:36:22.180] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:36:22.180] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:36:22.180] ubi2:animations is mounted. [2025-09-23 20:36:22.180] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:36:22.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:36:22.208] data.LB_FadeInType0=100 [2025-09-23 20:36:22.208] data.CHLH_FadeInType0=0 [2025-09-23 20:36:22.208] data.WU_FadeInDelay=0 [2025-09-23 20:36:22.208] max_time_out=0 [2025-09-23 20:36:22.208] No splash screen [2025-09-23 20:36:22.208] stop dss Done [2025-09-23 20:36:22.240] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:36:22.282] /dev/mem opened. [2025-09-23 20:36:22.282] Memory mapped at address 0xffff8f420000. [2025-09-23 20:36:22.282] Read at address 0x00600018 (0xffff8f420018): 0x00000000 [2025-09-23 20:36:22.282] Write at address 0x00600018 (0xffff8f420018): 0x00400040, readback 0x00400040 [2025-09-23 20:36:22.282] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:36:22.394] Loaded PowerVR consumer services. [2025-09-23 20:36:22.522] Waiting data available... [2025-09-23 20:36:22.537] 512+0 records in [2025-09-23 20:36:22.537] 512+0 records out [2025-09-23 20:36:22.553] Starting syslogd/klogd: done [2025-09-23 20:36:22.569] DML Start [2025-09-23 20:36:22.761] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:36:22.969] DML res1: 0 [2025-09-23 20:36:23.448] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:36:23.448] Read Success [2025-09-23 20:36:23.448] Verifying certificate... [2025-09-23 20:36:23.672] Verified OK [2025-09-23 20:36:23.688] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:36:25.268] Verified OK [2025-09-23 20:36:25.268] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:36:25.954] Verified OK [2025-09-23 20:36:25.954] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:36:28.625] fs.protected_hardlinks = 1 [2025-09-23 20:36:28.641] fs.protected_symlinks = 1 [2025-09-23 20:36:28.641] kernel.modules_disabled = 1 [2025-09-23 20:36:28.849] [2025-09-23 20:36:28.849] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:36:30.096] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:36:37.794] SBL1:1210.0.1.0 [2025-09-23 20:36:37.842] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:36:39.409] SBL2:1210.0.1.0 [2025-09-23 20:36:39.441] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:36:39.552] j-A [2025-09-23 20:36:46.907] The R5 Autosar Classic is running [2025-09-23 20:36:46.907] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:36:46.928] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:36:47.535] INIT: version 2.96 booting [2025-09-23 20:36:47.648] INIT: Entering runlevel: 5 [2025-09-23 20:36:47.792] mtd28 attached [2025-09-23 20:36:47.808] mtd24 attached [2025-09-23 20:36:47.824] mtd32 attached [2025-09-23 20:36:47.921] ubi0:animations is mounted. [2025-09-23 20:36:47.921] RTNETLINK answers: File exists [2025-09-23 20:36:47.921] ubi1:textures is mounted. [2025-09-23 20:36:47.921] ubi2:dml_code is mounted. [2025-09-23 20:36:47.921] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:36:47.921] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:36:47.921] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:36:47.921] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:36:47.921] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:36:47.921] data.LB_FadeInType0=100 [2025-09-23 20:36:47.921] data.CHLH_FadeInType0=0 [2025-09-23 20:36:47.921] data.WU_FadeInDelay=0 [2025-09-23 20:36:47.921] max_time_out=0 [2025-09-23 20:36:47.921] No splash screen [2025-09-23 20:36:47.921] stop dss Done [2025-09-23 20:36:48.011] /dev/mem opened. [2025-09-23 20:36:48.011] Memory mapped at address 0xffffa97e1000. [2025-09-23 20:36:48.011] Read at address 0x00600018 (0xffffa97e1018): 0x00000000 [2025-09-23 20:36:48.011] Write at address 0x00600018 (0xffffa97e1018): 0x00400040, readback 0x00400040 [2025-09-23 20:36:48.011] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:36:48.011] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:36:48.076] Loaded PowerVR consumer services. [2025-09-23 20:36:48.244] 512+0 records in [2025-09-23 20:36:48.244] 512+0 records out [2025-09-23 20:36:48.244] Waiting data available... [2025-09-23 20:36:48.276] Starting syslogd/klogd: done [2025-09-23 20:36:48.292] DML Start [2025-09-23 20:36:48.532] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:36:48.740] DML res1: 0 [2025-09-23 20:36:49.060] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:36:49.076] Read Success [2025-09-23 20:36:49.076] Verifying certificate... [2025-09-23 20:36:49.316] Verified OK [2025-09-23 20:36:49.332] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:36:50.887] Verified OK [2025-09-23 20:36:50.887] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:36:51.476] Verified OK [2025-09-23 20:36:51.476] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:36:54.258] fs.protected_hardlinks = 1 [2025-09-23 20:36:54.258] fs.protected_symlinks = 1 [2025-09-23 20:36:54.273] kernel.modules_disabled = 1 [2025-09-23 20:36:54.450] [2025-09-23 20:36:54.450] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:36:55.817] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:37:03.540] SBL1:1210.0.1.0 [2025-09-23 20:37:03.572] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:37:05.155] SBL2:1210.0.1.0 [2025-09-23 20:37:05.187] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 20:37:05.299] j-A [2025-09-23 20:37:12.636] The R5 Autosar Classic is running [2025-09-23 20:37:12.661] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:37:12.662] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:37:13.269] INIT: version 2.96 booting [2025-09-23 20:37:13.381] INIT: Entering runlevel: 5 [2025-09-23 20:37:13.541] mtd24 attached [2025-09-23 20:37:13.541] mtd28 attached [2025-09-23 20:37:13.557] mtd32 attached [2025-09-23 20:37:13.605] RTNETLINK answers: File exists [2025-09-23 20:37:13.675] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:37:13.675] ubi0:textures is mounted. [2025-09-23 20:37:13.675] ubi1:animations is mounted. [2025-09-23 20:37:13.675] ubi2:dml_code is mounted. [2025-09-23 20:37:13.675] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:37:13.675] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:37:13.675] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:37:13.675] data.LB_FadeInType0=100 [2025-09-23 20:37:13.675] data.CHLH_FadeInType0=0 [2025-09-23 20:37:13.675] data.WU_FadeInDelay=0 [2025-09-23 20:37:13.675] max_time_out=0 [2025-09-23 20:37:13.675] No splash screen [2025-09-23 20:37:13.675] stop dss Done [2025-09-23 20:37:13.675] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:37:13.743] /dev/mem opened. [2025-09-23 20:37:13.743] Memory mapped at address 0xffffb2539000. [2025-09-23 20:37:13.743] Read at address 0x00600018 (0xffffb2539018): 0x00000000 [2025-09-23 20:37:13.743] Write at address 0x00600018 (0xffffb2539018): 0x00400040, readback 0x00400040 [2025-09-23 20:37:13.776] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:37:13.808] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:37:13.952] Loaded PowerVR consumer services. [2025-09-23 20:37:14.031] Waiting data available... [2025-09-23 20:37:14.031] 512+0 records in [2025-09-23 20:37:14.031] 512+0 records out [2025-09-23 20:37:14.047] Starting syslogd/klogd: done [2025-09-23 20:37:14.063] DML Start [2025-09-23 20:37:14.254] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:37:14.478] DML res1: 0 [2025-09-23 20:37:14.918] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:37:14.918] Read Success [2025-09-23 20:37:14.918] Verifying certificate... [2025-09-23 20:37:15.142] Verified OK [2025-09-23 20:37:15.158] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:37:16.852] Verified OK [2025-09-23 20:37:16.868] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:37:17.444] Verified OK [2025-09-23 20:37:17.465] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:37:20.071] fs.protected_hardlinks = 1 [2025-09-23 20:37:20.087] fs.protected_symlinks = 1 [2025-09-23 20:37:20.087] kernel.modules_disabled = 1 [2025-09-23 20:37:20.295] [2025-09-23 20:37:20.295] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:37:21.579] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:37:29.277] SBL1:1210.0.1.0 [2025-09-23 20:37:29.325] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:37:30.892] SBL2:1210.0.1.0 [2025-09-23 20:37:30.940] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:37:31.036] j-A [2025-09-23 20:37:38.391] The R5 Autosar Classic is running [2025-09-23 20:37:38.415] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:37:38.415] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:37:39.022] INIT: version 2.96 booting [2025-09-23 20:37:39.134] INIT: Entering runlevel: 5 [2025-09-23 20:37:39.294] mtd32 attached [2025-09-23 20:37:39.310] mtd24 attached [2025-09-23 20:37:39.310] mtd28 attached [2025-09-23 20:37:39.358] RTNETLINK answers: File exists [2025-09-23 20:37:39.403] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:37:39.403] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:37:39.403] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:37:39.403] ubi1:textures is mounted. [2025-09-23 20:37:39.403] ubi0:dml_code is mounted. [2025-09-23 20:37:39.404] ubi2:animations is mounted. [2025-09-23 20:37:39.404] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:37:39.404] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:37:39.426] data.LB_FadeInType0=100 [2025-09-23 20:37:39.426] data.CHLH_FadeInType0=0 [2025-09-23 20:37:39.426] data.WU_FadeInDelay=0 [2025-09-23 20:37:39.426] max_time_out=0 [2025-09-23 20:37:39.426] No splash screen [2025-09-23 20:37:39.426] stop dss Done [2025-09-23 20:37:39.488] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:37:39.488] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:37:39.488] /dev/mem opened. [2025-09-23 20:37:39.488] Memory mapped at address 0xffffbdc81000. [2025-09-23 20:37:39.488] Read at address 0x00600018 (0xffffbdc81018): 0x00000000 [2025-09-23 20:37:39.488] Write at address 0x00600018 (0xffffbdc81018): 0x00400040, readback 0x00400040 [2025-09-23 20:37:39.633] Loaded PowerVR consumer services. [2025-09-23 20:37:39.744] Waiting data available... [2025-09-23 20:37:39.744] 512+0 records in [2025-09-23 20:37:39.760] 512+0 records out [2025-09-23 20:37:39.776] Starting syslogd/klogd: done [2025-09-23 20:37:39.808] DML Start [2025-09-23 20:37:39.984] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:37:40.224] DML res1: 0 [2025-09-23 20:37:40.630] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:37:40.630] Read Success [2025-09-23 20:37:40.630] Verifying certificate... [2025-09-23 20:37:40.870] Verified OK [2025-09-23 20:37:40.886] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:37:42.523] Verified OK [2025-09-23 20:37:42.523] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:37:43.194] Verified OK [2025-09-23 20:37:43.194] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:37:45.752] fs.protected_hardlinks = 1 [2025-09-23 20:37:45.752] fs.protected_symlinks = 1 [2025-09-23 20:37:45.768] kernel.modules_disabled = 1 [2025-09-23 20:37:45.975] [2025-09-23 20:37:45.975] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:37:47.296] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:37:55.012] SBL1:1210.0.1.0 [2025-09-23 20:37:55.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:37:56.627] SBL2:1210.0.1.0 [2025-09-23 20:37:56.658] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:37:56.771] j-A [2025-09-23 20:38:04.142] The R5 Autosar Classic is running [2025-09-23 20:38:04.142] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:38:04.142] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:38:04.749] INIT: version 2.96 booting [2025-09-23 20:38:04.862] INIT: Entering runlevel: 5 [2025-09-23 20:38:05.006] mtd24 attached [2025-09-23 20:38:05.021] mtd28 attached [2025-09-23 20:38:05.037] mtd32 attached [2025-09-23 20:38:05.053] ubi0:textures is mounted. [2025-09-23 20:38:05.085] RTNETLINK answers: File exists [2025-09-23 20:38:05.085] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:38:05.138] ubi1:animations is mounted. [2025-09-23 20:38:05.138] ubi2:dml_code is mounted. [2025-09-23 20:38:05.138] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:38:05.138] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:38:05.138] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:38:05.138] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:38:05.138] data.LB_FadeInType0=100 [2025-09-23 20:38:05.138] data.CHLH_FadeInType0=0 [2025-09-23 20:38:05.138] data.WU_FadeInDelay=0 [2025-09-23 20:38:05.138] max_time_out=0 [2025-09-23 20:38:05.138] No splash screen [2025-09-23 20:38:05.138] stop dss Done [2025-09-23 20:38:05.171] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:38:05.187] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:38:05.187] /dev/mem opened. [2025-09-23 20:38:05.219] Memory mapped at address 0xffffbcff3000. [2025-09-23 20:38:05.219] Read at address 0x00600018 (0xffffbcff3018): 0x00000000 [2025-09-23 20:38:05.219] Write at address 0x00600018 (0xffffbcff3018): 0x00400040, readback 0x00400040 [2025-09-23 20:38:05.410] Loaded PowerVR consumer services. [2025-09-23 20:38:05.458] Waiting data available... [2025-09-23 20:38:05.474] 512+0 records in [2025-09-23 20:38:05.474] 512+0 records out [2025-09-23 20:38:05.506] Starting syslogd/klogd: done [2025-09-23 20:38:05.522] DML Start [2025-09-23 20:38:05.682] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:38:05.922] DML res1: 0 [2025-09-23 20:38:06.367] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:38:06.367] Read Success [2025-09-23 20:38:06.367] Verifying certificate... [2025-09-23 20:38:06.654] Verified OK [2025-09-23 20:38:06.686] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:38:08.392] Verified OK [2025-09-23 20:38:08.392] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:38:09.037] Verified OK [2025-09-23 20:38:09.037] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:38:11.547] fs.protected_hardlinks = 1 [2025-09-23 20:38:11.563] fs.protected_symlinks = 1 [2025-09-23 20:38:11.563] kernel.modules_disabled = 1 [2025-09-23 20:38:11.755] [2025-09-23 20:38:11.755] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:38:13.022] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:38:20.737] SBL1:1210.0.1.0 [2025-09-23 20:38:20.769] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:38:22.352] SBL2:1210.0.1.0 [2025-09-23 20:38:22.383] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:38:22.496] j-A [2025-09-23 20:38:29.835] The R5 Autosar Classic is running [2025-09-23 20:38:29.860] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:38:29.860] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:38:30.468] INIT: version 2.96 booting [2025-09-23 20:38:30.579] INIT: Entering runlevel: 5 [2025-09-23 20:38:30.740] mtd24 attached [2025-09-23 20:38:30.756] mtd28 attached [2025-09-23 20:38:30.772] mtd32 attached [2025-09-23 20:38:30.804] RTNETLINK answers: File exists [2025-09-23 20:38:30.872] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:38:30.872] ubi0:textures is mounted. [2025-09-23 20:38:30.872] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:38:30.872] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:38:30.872] ubi1:animations is mounted. [2025-09-23 20:38:30.872] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:38:30.872] ubi2:dml_code is mounted. [2025-09-23 20:38:30.872] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:38:30.872] data.LB_FadeInType0=100 [2025-09-23 20:38:30.872] data.CHLH_FadeInType0=0 [2025-09-23 20:38:30.872] data.WU_FadeInDelay=0 [2025-09-23 20:38:30.872] max_time_out=0 [2025-09-23 20:38:30.872] No splash screen [2025-09-23 20:38:30.872] stop dss Done [2025-09-23 20:38:30.943] /dev/mem opened. [2025-09-23 20:38:30.943] Memory mapped at address 0xffffb7971000. [2025-09-23 20:38:30.943] Read at address 0x00600018 (0xffffb7971018): 0x00000000 [2025-09-23 20:38:30.943] Write at address 0x00600018 (0xffffb7971018): 0x00400040, readback 0x00400040 [2025-09-23 20:38:30.943] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:38:30.943] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:38:31.152] Loaded PowerVR consumer services. [2025-09-23 20:38:31.199] 512+0 records in [2025-09-23 20:38:31.199] 512+0 records out [2025-09-23 20:38:31.215] Waiting data available... [2025-09-23 20:38:31.231] Starting syslogd/klogd: done [2025-09-23 20:38:31.263] DML Start [2025-09-23 20:38:31.407] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:38:31.647] DML res1: 0 [2025-09-23 20:38:32.095] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:38:32.116] Read Success [2025-09-23 20:38:32.116] Verifying certificate... [2025-09-23 20:38:32.355] Verified OK [2025-09-23 20:38:32.387] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:38:34.129] Verified OK [2025-09-23 20:38:34.129] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:38:34.710] Verified OK [2025-09-23 20:38:34.710] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:38:37.173] fs.protected_hardlinks = 1 [2025-09-23 20:38:37.188] fs.protected_symlinks = 1 [2025-09-23 20:38:37.188] kernel.modules_disabled = 1 [2025-09-23 20:38:37.396] [2025-09-23 20:38:37.396] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:38:38.729] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:38:46.460] SBL1:1210.0.1.0 [2025-09-23 20:38:46.508] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:38:48.075] SBL2:1210.0.1.0 [2025-09-23 20:38:48.123] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:38:48.218] j-A [2025-09-23 20:38:55.574] The R5 Autosar Classic is running [2025-09-23 20:38:55.574] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:38:55.595] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:38:56.204] INIT: version 2.96 booting [2025-09-23 20:38:56.315] INIT: Entering runlevel: 5 [2025-09-23 20:38:56.459] mtd28 attached [2025-09-23 20:38:56.475] mtd24 attached [2025-09-23 20:38:56.475] mtd32 attached [2025-09-23 20:38:56.522] ubi1:textures is mounted. [2025-09-23 20:38:56.567] RTNETLINK answers: File exists [2025-09-23 20:38:56.567] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:38:56.567] ubi0:animations is mounted. [2025-09-23 20:38:56.567] ubi2:dml_code is mounted. [2025-09-23 20:38:56.567] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:38:56.567] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:38:56.567] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:38:56.596] data.LB_FadeInType0=100 [2025-09-23 20:38:56.596] data.CHLH_FadeInType0=0 [2025-09-23 20:38:56.596] data.WU_FadeInDelay=0 [2025-09-23 20:38:56.596] max_time_out=0 [2025-09-23 20:38:56.596] No splash screen [2025-09-23 20:38:56.596] stop dss Done [2025-09-23 20:38:56.596] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:38:56.663] /dev/mem opened. [2025-09-23 20:38:56.663] Memory mapped at address 0xffffa3685000. [2025-09-23 20:38:56.663] Read at address 0x00600018 (0xffffa3685018): 0x00000000 [2025-09-23 20:38:56.663] Write at address 0x00600018 (0xffffa3685018): 0x00400040, readback 0x00400040 [2025-09-23 20:38:56.663] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:38:56.679] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:38:56.775] Loaded PowerVR consumer services. [2025-09-23 20:38:56.903] Waiting data available... [2025-09-23 20:38:56.919] 512+0 records in [2025-09-23 20:38:56.919] 512+0 records out [2025-09-23 20:38:56.951] Starting syslogd/klogd: done [2025-09-23 20:38:56.967] DML Start [2025-09-23 20:38:57.143] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:38:57.383] DML res1: 0 [2025-09-23 20:38:57.844] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:38:57.844] Read Success [2025-09-23 20:38:57.844] Verifying certificate... [2025-09-23 20:38:58.115] Verified OK [2025-09-23 20:38:58.131] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:38:59.790] Verified OK [2025-09-23 20:38:59.790] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:39:00.490] Verified OK [2025-09-23 20:39:00.490] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:39:03.064] fs.protected_hardlinks = 1 [2025-09-23 20:39:03.064] fs.protected_symlinks = 1 [2025-09-23 20:39:03.079] kernel.modules_disabled = 1 [2025-09-23 20:39:03.271] [2025-09-23 20:39:03.271] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:39:04.494] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:39:12.208] SBL1:1210.0.1.0 [2025-09-23 20:39:12.256] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:39:13.822] SBL2:1210.0.1.0 [2025-09-23 20:39:13.854] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 20:39:13.967] j-A [2025-09-23 20:39:21.342] The R5 Autosar Classic is running [2025-09-23 20:39:21.342] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:39:21.342] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:39:21.951] INIT: version 2.96 booting [2025-09-23 20:39:22.062] INIT: Entering runlevel: 5 [2025-09-23 20:39:22.206] mtd24 attached [2025-09-23 20:39:22.222] mtd32 attached [2025-09-23 20:39:22.238] mtd28 attached [2025-09-23 20:39:22.286] RTNETLINK answers: File exists [2025-09-23 20:39:22.286] ubi0:textures is mounted. [2025-09-23 20:39:22.341] ubi1:dml_code is mounted. [2025-09-23 20:39:22.341] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:39:22.341] ubi2:animations is mounted. [2025-09-23 20:39:22.341] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:39:22.341] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:39:22.341] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:39:22.341] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:39:22.341] data.LB_FadeInType0=100 [2025-09-23 20:39:22.341] data.CHLH_FadeInType0=0 [2025-09-23 20:39:22.341] data.WU_FadeInDelay=0 [2025-09-23 20:39:22.341] max_time_out=0 [2025-09-23 20:39:22.341] No splash screen [2025-09-23 20:39:22.341] stop dss Done [2025-09-23 20:39:22.421] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:39:22.421] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:39:22.421] /dev/mem opened. [2025-09-23 20:39:22.421] Memory mapped at address 0xffffa3897000. [2025-09-23 20:39:22.421] Read at address 0x00600018 (0xffffa3897018): 0x00000000 [2025-09-23 20:39:22.421] Write at address 0x00600018 (0xffffa3897018): 0x00400040, readback 0x00400040 [2025-09-23 20:39:22.533] Loaded PowerVR consumer services. [2025-09-23 20:39:22.661] Waiting data available... [2025-09-23 20:39:22.677] 512+0 records in [2025-09-23 20:39:22.677] 512+0 records out [2025-09-23 20:39:22.709] Starting syslogd/klogd: done [2025-09-23 20:39:22.725] DML Start [2025-09-23 20:39:22.885] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:39:23.109] DML res1: 0 [2025-09-23 20:39:23.556] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:39:23.572] Read Success [2025-09-23 20:39:23.572] Verifying certificate... [2025-09-23 20:39:23.844] Verified OK [2025-09-23 20:39:23.860] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:39:25.519] Verified OK [2025-09-23 20:39:25.519] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:39:26.063] Verified OK [2025-09-23 20:39:26.063] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:39:28.653] fs.protected_hardlinks = 1 [2025-09-23 20:39:28.653] fs.protected_symlinks = 1 [2025-09-23 20:39:28.669] kernel.modules_disabled = 1 [2025-09-23 20:39:28.861] [2025-09-23 20:39:28.861] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:39:30.235] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:39:37.949] SBL1:1210.0.1.0 [2025-09-23 20:39:37.997] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:39:39.563] SBL2:1210.0.1.0 [2025-09-23 20:39:39.596] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:39:39.707] j-A [2025-09-23 20:39:47.082] The R5 Autosar Classic is running [2025-09-23 20:39:47.083] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:39:47.083] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:39:47.691] INIT: version 2.96 booting [2025-09-23 20:39:47.802] INIT: Entering runlevel: 5 [2025-09-23 20:39:47.963] mtd32 attached [2025-09-23 20:39:47.963] mtd24 attached [2025-09-23 20:39:47.978] mtd28 attached [2025-09-23 20:39:48.026] RTNETLINK answers: File exists [2025-09-23 20:39:48.085] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:39:48.085] ubi2:animations is mounted. [2025-09-23 20:39:48.085] ubi0:dml_code is mounted. [2025-09-23 20:39:48.085] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:39:48.085] ubi1:textures is mounted. [2025-09-23 20:39:48.085] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:39:48.085] data.LB_FadeInType0=100 [2025-09-23 20:39:48.085] data.CHLH_FadeInType0=0 [2025-09-23 20:39:48.085] data.WU_FadeInDelay=0 [2025-09-23 20:39:48.085] max_time_out=0 [2025-09-23 20:39:48.085] No splash screen [2025-09-23 20:39:48.085] stop dss Done [2025-09-23 20:39:48.085] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:39:48.085] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:39:48.163] /dev/mem opened. [2025-09-23 20:39:48.163] Memory mapped at address 0xffff99fd5000. [2025-09-23 20:39:48.163] Read at address 0x00600018 (0xffff99fd5018): 0x00000000 [2025-09-23 20:39:48.163] Write at address 0x00600018 (0xffff99fd5018): 0x00400040, readback 0x00400040 [2025-09-23 20:39:48.163] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:39:48.163] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:39:48.275] Loaded PowerVR consumer services. [2025-09-23 20:39:48.403] 512+0 records in [2025-09-23 20:39:48.403] 512+0 records out [2025-09-23 20:39:48.419] Waiting data available... [2025-09-23 20:39:48.451] Starting syslogd/klogd: done [2025-09-23 20:39:48.467] DML Start [2025-09-23 20:39:48.675] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:39:48.883] DML res1: 0 [2025-09-23 20:39:49.315] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:39:49.330] Read Success [2025-09-23 20:39:49.330] Verifying certificate... [2025-09-23 20:39:49.570] Verified OK [2025-09-23 20:39:49.586] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:39:51.198] Verified OK [2025-09-23 20:39:51.198] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:39:51.790] Verified OK [2025-09-23 20:39:51.790] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:39:54.365] fs.protected_hardlinks = 1 [2025-09-23 20:39:54.381] fs.protected_symlinks = 1 [2025-09-23 20:39:54.381] kernel.modules_disabled = 1 [2025-09-23 20:39:54.573] [2025-09-23 20:39:54.573] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:39:55.889] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:40:03.710] SBL1:1210.0.1.0 [2025-09-23 20:40:03.758] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:40:05.326] SBL2:1210.0.1.0 [2025-09-23 20:40:05.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:40:05.485] j-A [2025-09-23 20:40:12.824] The R5 Autosar Classic is running [2025-09-23 20:40:12.849] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:40:12.849] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:40:13.457] INIT: version 2.96 booting [2025-09-23 20:40:13.568] INIT: Entering runlevel: 5 [2025-09-23 20:40:13.728] mtd32 attached [2025-09-23 20:40:13.728] mtd28 attached [2025-09-23 20:40:13.744] mtd24 attached [2025-09-23 20:40:13.792] RTNETLINK answers: File exists [2025-09-23 20:40:13.862] ubi1:animations is mounted. [2025-09-23 20:40:13.862] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:40:13.862] ubi0:dml_code is mounted. [2025-09-23 20:40:13.862] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:40:13.862] ubi2:textures is mounted. [2025-09-23 20:40:13.862] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:40:13.862] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:40:13.862] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:40:13.862] data.LB_FadeInType0=100 [2025-09-23 20:40:13.862] data.CHLH_FadeInType0=0 [2025-09-23 20:40:13.862] data.WU_FadeInDelay=0 [2025-09-23 20:40:13.862] max_time_out=0 [2025-09-23 20:40:13.862] No splash screen [2025-09-23 20:40:13.862] stop dss Done [2025-09-23 20:40:13.905] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:40:13.905] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:40:13.905] /dev/mem opened. [2025-09-23 20:40:13.905] Memory mapped at address 0xffff930e5000. [2025-09-23 20:40:13.930] Read at address 0x00600018 (0xffff930e5018): 0x00000000 [2025-09-23 20:40:13.930] Write at address 0x00600018 (0xffff930e5018): 0x00400040, readback 0x00400040 [2025-09-23 20:40:14.123] Loaded PowerVR consumer services. [2025-09-23 20:40:14.209] Waiting data available... [2025-09-23 20:40:14.209] 512+0 records in [2025-09-23 20:40:14.209] 512+0 records out [2025-09-23 20:40:14.241] Starting syslogd/klogd: done [2025-09-23 20:40:14.257] DML Start [2025-09-23 20:40:14.449] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:40:14.673] DML res1: 0 [2025-09-23 20:40:15.114] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:40:15.114] Read Success [2025-09-23 20:40:15.114] Verifying certificate... [2025-09-23 20:40:15.385] Verified OK [2025-09-23 20:40:15.385] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:40:16.990] Verified OK [2025-09-23 20:40:16.990] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:40:17.663] Verified OK [2025-09-23 20:40:17.663] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:40:20.349] fs.protected_hardlinks = 1 [2025-09-23 20:40:20.380] fs.protected_symlinks = 1 [2025-09-23 20:40:20.380] kernel.modules_disabled = 1 [2025-09-23 20:40:20.556] [2025-09-23 20:40:20.556] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:40:21.737] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:40:29.458] SBL1:1210.0.1.0 [2025-09-23 20:40:29.490] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:40:31.073] SBL2:1210.0.1.0 [2025-09-23 20:40:31.105] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:40:31.216] j-A [2025-09-23 20:40:38.588] The R5 Autosar Classic is running [2025-09-23 20:40:38.588] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:40:38.588] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:40:39.196] INIT: version 2.96 booting [2025-09-23 20:40:39.308] INIT: Entering runlevel: 5 [2025-09-23 20:40:39.468] mtd32 attached [2025-09-23 20:40:39.468] mtd24 attached [2025-09-23 20:40:39.484] mtd28 attached [2025-09-23 20:40:39.515] ubi0:dml_code is mounted. [2025-09-23 20:40:39.531] ubi2:animations is mounted. [2025-09-23 20:40:39.531] RTNETLINK answers: File exists [2025-09-23 20:40:39.547] ubi1:textures is mounted. [2025-09-23 20:40:39.547] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:40:39.582] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:40:39.582] data.LB_FadeInType0=100 [2025-09-23 20:40:39.582] data.CHLH_FadeInType0=0 [2025-09-23 20:40:39.582] data.WU_FadeInDelay=0 [2025-09-23 20:40:39.582] max_time_out=0 [2025-09-23 20:40:39.582] No splash screen [2025-09-23 20:40:39.582] stop dss Done [2025-09-23 20:40:39.582] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:40:39.582] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:40:39.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:40:39.630] /dev/mem opened. [2025-09-23 20:40:39.630] Memory mapped at address 0xffff88c99000. [2025-09-23 20:40:39.656] Read at address 0x00600018 (0xffff88c99018): 0x00000000 [2025-09-23 20:40:39.656] Write at address 0x00600018 (0xffff88c99018): 0x00400040, readback 0x00400040 [2025-09-23 20:40:39.737] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:40:39.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:40:39.768] Loaded PowerVR consumer services. [2025-09-23 20:40:39.912] 512+0 records in [2025-09-23 20:40:39.912] 512+0 records out [2025-09-23 20:40:39.912] Waiting data available... [2025-09-23 20:40:39.960] Starting syslogd/klogd: done [2025-09-23 20:40:39.976] DML Start [2025-09-23 20:40:40.168] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:40:40.392] DML res1: 0 [2025-09-23 20:40:40.801] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:40:40.801] Read Success [2025-09-23 20:40:40.801] Verifying certificate... [2025-09-23 20:40:41.073] Verified OK [2025-09-23 20:40:41.088] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:40:42.688] Verified OK [2025-09-23 20:40:42.688] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:40:43.326] Verified OK [2025-09-23 20:40:43.326] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:40:45.980] fs.protected_hardlinks = 1 [2025-09-23 20:40:45.980] fs.protected_symlinks = 1 [2025-09-23 20:40:45.995] kernel.modules_disabled = 1 [2025-09-23 20:40:46.188] [2025-09-23 20:40:46.188] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:40:47.473] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:40:55.195] SBL1:1210.0.1.0 [2025-09-23 20:40:55.243] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:40:56.809] SBL2:1210.0.1.0 [2025-09-23 20:40:56.857] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:40:56.954] j-A [2025-09-23 20:41:04.307] The R5 Autosar Classic is running [2025-09-23 20:41:04.330] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:41:04.330] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:41:04.937] INIT: version 2.96 booting [2025-09-23 20:41:05.049] INIT: Entering runlevel: 5 [2025-09-23 20:41:05.209] mtd32 attached [2025-09-23 20:41:05.209] mtd24 attached [2025-09-23 20:41:05.225] mtd28 attached [2025-09-23 20:41:05.273] RTNETLINK answers: File exists [2025-09-23 20:41:05.318] ubi0:dml_code is mounted. [2025-09-23 20:41:05.318] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:41:05.318] ubi1:textures is mounted. [2025-09-23 20:41:05.318] ubi2:animations is mounted. [2025-09-23 20:41:05.318] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:41:05.318] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:41:05.318] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:41:05.318] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:41:05.346] data.LB_FadeInType0=100 [2025-09-23 20:41:05.346] data.CHLH_FadeInType0=0 [2025-09-23 20:41:05.346] data.WU_FadeInDelay=0 [2025-09-23 20:41:05.346] max_time_out=0 [2025-09-23 20:41:05.346] No splash screen [2025-09-23 20:41:05.346] stop dss Done [2025-09-23 20:41:05.417] /dev/mem opened. [2025-09-23 20:41:05.417] Memory mapped at address 0xffff95686000. [2025-09-23 20:41:05.417] Read at address 0x00600018 (0xffff95686018): 0x00000000 [2025-09-23 20:41:05.417] Write at address 0x00600018 (0xffff95686018): 0x00400040, readback 0x00400040 [2025-09-23 20:41:05.417] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:41:05.433] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:41:05.561] Loaded PowerVR consumer services. [2025-09-23 20:41:05.656] Waiting data available... [2025-09-23 20:41:05.672] 512+0 records in [2025-09-23 20:41:05.672] 512+0 records out [2025-09-23 20:41:05.704] Starting syslogd/klogd: done [2025-09-23 20:41:05.721] DML Start [2025-09-23 20:41:05.912] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:41:06.120] DML res1: 0 [2025-09-23 20:41:06.558] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:41:06.558] Read Success [2025-09-23 20:41:06.558] Verifying certificate... [2025-09-23 20:41:06.798] Verified OK [2025-09-23 20:41:06.814] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:41:08.588] Verified OK [2025-09-23 20:41:08.605] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:41:09.209] Verified OK [2025-09-23 20:41:09.209] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:41:11.687] fs.protected_hardlinks = 1 [2025-09-23 20:41:11.703] fs.protected_symlinks = 1 [2025-09-23 20:41:11.719] kernel.modules_disabled = 1 [2025-09-23 20:41:11.911] [2025-09-23 20:41:11.911] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:41:13.174] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:41:20.912] SBL1:1210.0.1.0 [2025-09-23 20:41:20.960] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:41:22.526] SBL2:1210.0.1.0 [2025-09-23 20:41:22.575] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:41:22.670] j-A [2025-09-23 20:41:30.025] The R5 Autosar Classic is running [2025-09-23 20:41:30.049] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:41:30.049] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:41:30.656] INIT: version 2.96 booting [2025-09-23 20:41:30.767] INIT: Entering runlevel: 5 [2025-09-23 20:41:30.928] mtd32 attached [2025-09-23 20:41:30.928] mtd28 attached [2025-09-23 20:41:30.944] mtd24 attached [2025-09-23 20:41:30.991] RTNETLINK answers: File exists [2025-09-23 20:41:31.035] ubi0:dml_code is mounted. [2025-09-23 20:41:31.035] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:41:31.035] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:41:31.035] ubi1:animations is mounted. [2025-09-23 20:41:31.035] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:41:31.035] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:41:31.035] ubi2:textures is mounted. [2025-09-23 20:41:31.035] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:41:31.061] data.LB_FadeInType0=100 [2025-09-23 20:41:31.061] data.CHLH_FadeInType0=0 [2025-09-23 20:41:31.061] data.WU_FadeInDelay=0 [2025-09-23 20:41:31.061] max_time_out=0 [2025-09-23 20:41:31.061] No splash screen [2025-09-23 20:41:31.061] stop dss Done [2025-09-23 20:41:31.092] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:41:31.092] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:41:31.141] /dev/mem opened. [2025-09-23 20:41:31.141] Memory mapped at address 0xffff83f48000. [2025-09-23 20:41:31.141] Read at address 0x00600018 (0xffff83f48018): 0x00000000 [2025-09-23 20:41:31.141] Write at address 0x00600018 (0xffff83f48018): 0x00400040, readback 0x00400040 [2025-09-23 20:41:31.285] Loaded PowerVR consumer services. [2025-09-23 20:41:31.398] Waiting data available... [2025-09-23 20:41:31.414] 512+0 records in [2025-09-23 20:41:31.414] 512+0 records out [2025-09-23 20:41:31.430] Starting syslogd/klogd: done [2025-09-23 20:41:31.462] DML Start [2025-09-23 20:41:31.621] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:41:31.877] DML res1: 0 [2025-09-23 20:41:32.282] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:41:32.282] Read Success [2025-09-23 20:41:32.282] Verifying certificate... [2025-09-23 20:41:32.505] Verified OK [2025-09-23 20:41:32.522] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:41:34.197] Verified OK [2025-09-23 20:41:34.197] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:41:34.789] Verified OK [2025-09-23 20:41:34.805] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:41:37.379] fs.protected_hardlinks = 1 [2025-09-23 20:41:37.379] fs.protected_symlinks = 1 [2025-09-23 20:41:37.394] kernel.modules_disabled = 1 [2025-09-23 20:41:37.587] [2025-09-23 20:41:37.587] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:41:38.948] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:41:46.648] SBL1:1210.0.1.0 [2025-09-23 20:41:46.680] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:41:48.263] SBL2:1210.0.1.0 [2025-09-23 20:41:48.295] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:41:48.407] j-A [2025-09-23 20:41:55.745] The R5 Autosar Classic is running [2025-09-23 20:41:55.776] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:41:55.776] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:41:56.384] INIT: version 2.96 booting [2025-09-23 20:41:56.496] INIT: Entering runlevel: 5 [2025-09-23 20:41:56.657] mtd28 attached [2025-09-23 20:41:56.657] mtd32 attached [2025-09-23 20:41:56.672] mtd24 attached [2025-09-23 20:41:56.720] RTNETLINK answers: File exists [2025-09-23 20:41:56.786] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:41:56.786] ubi0:animations is mounted. [2025-09-23 20:41:56.786] ubi2:textures is mounted. [2025-09-23 20:41:56.786] ubi1:dml_code is mounted. [2025-09-23 20:41:56.786] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:41:56.786] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:41:56.786] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:41:56.786] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:41:56.786] data.LB_FadeInType0=100 [2025-09-23 20:41:56.786] data.CHLH_FadeInType0=0 [2025-09-23 20:41:56.786] data.WU_FadeInDelay=0 [2025-09-23 20:41:56.786] max_time_out=0 [2025-09-23 20:41:56.786] No splash screen [2025-09-23 20:41:56.786] stop dss Done [2025-09-23 20:41:56.864] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:41:56.864] /dev/mem opened. [2025-09-23 20:41:56.864] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:41:56.864] Memory mapped at address 0xffffaeb8f000. [2025-09-23 20:41:56.864] Read at address 0x00600018 (0xffffaeb8f018): 0x00000000 [2025-09-23 20:41:56.864] Write at address 0x00600018 (0xffffaeb8f018): 0x00400040, readback 0x00400040 [2025-09-23 20:41:57.055] Loaded PowerVR consumer services. [2025-09-23 20:41:57.087] 512+0 records in [2025-09-23 20:41:57.104] 512+0 records out [2025-09-23 20:41:57.104] Waiting data available... [2025-09-23 20:41:57.120] Starting syslogd/klogd: done [2025-09-23 20:41:57.152] DML Start [2025-09-23 20:41:57.343] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:41:57.568] DML res1: 0 [2025-09-23 20:41:58.043] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:41:58.043] Read Success [2025-09-23 20:41:58.043] Verifying certificate... [2025-09-23 20:41:58.315] Verified OK [2025-09-23 20:41:58.331] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:41:59.962] Verified OK [2025-09-23 20:41:59.978] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:42:00.593] Verified OK [2025-09-23 20:42:00.593] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:42:03.167] fs.protected_hardlinks = 1 [2025-09-23 20:42:03.167] fs.protected_symlinks = 1 [2025-09-23 20:42:03.183] kernel.modules_disabled = 1 [2025-09-23 20:42:03.359] [2025-09-23 20:42:03.359] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:42:04.605] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:42:12.395] SBL1:1210.0.1.0 [2025-09-23 20:42:12.427] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:42:14.010] SBL2:1210.0.1.0 [2025-09-23 20:42:14.041] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:42:14.153] j-A [2025-09-23 20:42:21.493] The R5 Autosar Classic is running [2025-09-23 20:42:21.524] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:42:21.524] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:42:22.132] INIT: version 2.96 booting [2025-09-23 20:42:22.243] INIT: Entering runlevel: 5 [2025-09-23 20:42:22.404] mtd24 attached [2025-09-23 20:42:22.404] mtd28 attached [2025-09-23 20:42:22.420] mtd32 attached [2025-09-23 20:42:22.452] ubi0:textures is mounted. [2025-09-23 20:42:22.539] ubi1:animations is mounted. [2025-09-23 20:42:22.539] RTNETLINK answers: File exists [2025-09-23 20:42:22.539] ubi2:dml_code is mounted. [2025-09-23 20:42:22.539] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:42:22.539] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:42:22.539] data.LB_FadeInType0=100 [2025-09-23 20:42:22.539] data.CHLH_FadeInType0=0 [2025-09-23 20:42:22.539] data.WU_FadeInDelay=0 [2025-09-23 20:42:22.539] max_time_out=0 [2025-09-23 20:42:22.539] No splash screen [2025-09-23 20:42:22.539] stop dss Done [2025-09-23 20:42:22.539] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:42:22.539] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:42:22.539] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:42:22.596] /dev/mem opened. [2025-09-23 20:42:22.596] Memory mapped at address 0xffffaee87000. [2025-09-23 20:42:22.596] Read at address 0x00600018 (0xffffaee87018): 0x00000000 [2025-09-23 20:42:22.596] Write at address 0x00600018 (0xffffaee87018): 0x00400040, readback 0x00400040 [2025-09-23 20:42:22.612] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:42:22.628] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:42:22.724] Loaded PowerVR consumer services. [2025-09-23 20:42:22.867] Waiting data available... [2025-09-23 20:42:22.867] 512+0 records in [2025-09-23 20:42:22.867] 512+0 records out [2025-09-23 20:42:22.899] Starting syslogd/klogd: done [2025-09-23 20:42:22.915] DML Start [2025-09-23 20:42:23.074] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:42:23.267] DML res1: 0 [2025-09-23 20:42:23.832] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:42:23.832] Read Success [2025-09-23 20:42:23.832] Verifying certificate... [2025-09-23 20:42:24.088] Verified OK [2025-09-23 20:42:24.120] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:42:25.779] Verified OK [2025-09-23 20:42:25.779] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:42:26.361] Verified OK [2025-09-23 20:42:26.361] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:42:28.919] fs.protected_hardlinks = 1 [2025-09-23 20:42:28.919] fs.protected_symlinks = 1 [2025-09-23 20:42:28.935] kernel.modules_disabled = 1 [2025-09-23 20:42:29.126] [2025-09-23 20:42:29.126] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:42:30.451] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:42:38.113] SBL1:1210.0.1.0 [2025-09-23 20:42:38.161] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:42:39.728] SBL2:1210.0.1.0 [2025-09-23 20:42:39.775] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:42:39.872] j-A [2025-09-23 20:42:47.227] The R5 Autosar Classic is running [2025-09-23 20:42:47.249] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:42:47.249] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:42:47.857] INIT: version 2.96 booting [2025-09-23 20:42:47.969] INIT: Entering runlevel: 5 [2025-09-23 20:42:48.129] mtd28 attached [2025-09-23 20:42:48.145] mtd32 attached [2025-09-23 20:42:48.145] mtd24 attached [2025-09-23 20:42:48.193] ubi0:animations is mounted. [2025-09-23 20:42:48.193] RTNETLINK answers: File exists [2025-09-23 20:42:48.261] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:42:48.261] ubi2:textures is mounted. [2025-09-23 20:42:48.261] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:42:48.261] ubi1:dml_code is mounted. [2025-09-23 20:42:48.261] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:42:48.261] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:42:48.261] data.LB_FadeInType0=100 [2025-09-23 20:42:48.261] data.CHLH_FadeInType0=0 [2025-09-23 20:42:48.261] data.WU_FadeInDelay=0 [2025-09-23 20:42:48.261] max_time_out=0 [2025-09-23 20:42:48.261] No splash screen [2025-09-23 20:42:48.261] stop dss Done [2025-09-23 20:42:48.261] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:42:48.293] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:42:48.333] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:42:48.333] /dev/mem opened. [2025-09-23 20:42:48.333] Memory mapped at address 0xffff9e3cd000. [2025-09-23 20:42:48.333] Read at address 0x00600018 (0xffff9e3cd018): 0x00000000 [2025-09-23 20:42:48.333] Write at address 0x00600018 (0xffff9e3cd018): 0x00400040, readback 0x00400040 [2025-09-23 20:42:48.493] Loaded PowerVR consumer services. [2025-09-23 20:42:48.611] 512+0 records in [2025-09-23 20:42:48.611] 512+0 records out [2025-09-23 20:42:48.611] Waiting data available... [2025-09-23 20:42:48.627] Starting syslogd/klogd: done [2025-09-23 20:42:48.643] DML Start [2025-09-23 20:42:48.770] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:42:49.010] DML res1: 0 [2025-09-23 20:42:49.521] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:42:49.521] Read Success [2025-09-23 20:42:49.521] Verifying certificate... [2025-09-23 20:42:49.793] Verified OK [2025-09-23 20:42:49.793] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:42:51.535] Verified OK [2025-09-23 20:42:51.535] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:42:52.150] Verified OK [2025-09-23 20:42:52.150] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:42:54.644] fs.protected_hardlinks = 1 [2025-09-23 20:42:54.644] fs.protected_symlinks = 1 [2025-09-23 20:42:54.660] kernel.modules_disabled = 1 [2025-09-23 20:42:54.868] [2025-09-23 20:42:54.868] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:42:56.083] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:43:03.819] SBL1:1210.0.1.0 [2025-09-23 20:43:03.868] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:43:05.433] SBL2:1210.0.1.0 [2025-09-23 20:43:05.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:43:05.578] j-A [2025-09-23 20:43:12.933] The R5 Autosar Classic is running [2025-09-23 20:43:12.957] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:43:12.957] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:43:13.565] INIT: version 2.96 booting [2025-09-23 20:43:13.676] INIT: Entering runlevel: 5 [2025-09-23 20:43:13.821] mtd28 attached [2025-09-23 20:43:13.837] mtd32 attached [2025-09-23 20:43:13.837] mtd24 attached [2025-09-23 20:43:13.954] RTNETLINK answers: File exists [2025-09-23 20:43:13.954] ubi1:dml_code is mounted. [2025-09-23 20:43:13.954] ubi0:animations is mounted. [2025-09-23 20:43:13.954] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:43:13.954] ubi2:textures is mounted. [2025-09-23 20:43:13.954] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:43:13.954] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:43:13.954] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:43:13.954] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:43:13.954] data.LB_FadeInType0=100 [2025-09-23 20:43:13.954] data.CHLH_FadeInType0=0 [2025-09-23 20:43:13.954] data.WU_FadeInDelay=0 [2025-09-23 20:43:13.954] max_time_out=0 [2025-09-23 20:43:13.954] No splash screen [2025-09-23 20:43:13.954] stop dss Done [2025-09-23 20:43:13.987] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:43:14.003] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:43:14.039] /dev/mem opened. [2025-09-23 20:43:14.039] Memory mapped at address 0xffffb684b000. [2025-09-23 20:43:14.039] Read at address 0x00600018 (0xffffb684b018): 0x00000000 [2025-09-23 20:43:14.039] Write at address 0x00600018 (0xffffb684b018): 0x00400040, readback 0x00400040 [2025-09-23 20:43:14.231] Loaded PowerVR consumer services. [2025-09-23 20:43:14.263] Waiting data available... [2025-09-23 20:43:14.279] 512+0 records in [2025-09-23 20:43:14.279] 512+0 records out [2025-09-23 20:43:14.310] Starting syslogd/klogd: done [2025-09-23 20:43:14.326] DML Start [2025-09-23 20:43:14.503] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:43:14.727] DML res1: 0 [2025-09-23 20:43:15.142] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:43:15.163] Read Success [2025-09-23 20:43:15.163] Verifying certificate... [2025-09-23 20:43:15.419] Verified OK [2025-09-23 20:43:15.435] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:43:17.046] Verified OK [2025-09-23 20:43:17.046] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:43:17.683] Verified OK [2025-09-23 20:43:17.683] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:43:20.257] fs.protected_hardlinks = 1 [2025-09-23 20:43:20.257] fs.protected_symlinks = 1 [2025-09-23 20:43:20.272] kernel.modules_disabled = 1 [2025-09-23 20:43:20.481] [2025-09-23 20:43:20.481] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:43:21.833] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:43:29.557] SBL1:1210.0.1.0 [2025-09-23 20:43:29.605] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:43:31.187] SBL2:1210.0.1.0 [2025-09-23 20:43:31.219] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:43:31.331] j-A [2025-09-23 20:43:38.670] The R5 Autosar Classic is running [2025-09-23 20:43:38.695] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:43:38.695] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:43:39.303] INIT: version 2.96 booting [2025-09-23 20:43:39.414] INIT: Entering runlevel: 5 [2025-09-23 20:43:39.574] mtd24 attached [2025-09-23 20:43:39.590] mtd28 attached [2025-09-23 20:43:39.606] mtd32 attached [2025-09-23 20:43:39.622] ubi0:textures is mounted. [2025-09-23 20:43:39.654] RTNETLINK answers: File exists [2025-09-23 20:43:39.654] ubi2:dml_code is mounted. [2025-09-23 20:43:39.710] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:43:39.710] ubi1:animations is mounted. [2025-09-23 20:43:39.710] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:43:39.710] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:43:39.710] data.LB_FadeInType0=100 [2025-09-23 20:43:39.710] data.CHLH_FadeInType0=0 [2025-09-23 20:43:39.710] data.WU_FadeInDelay=0 [2025-09-23 20:43:39.710] max_time_out=0 [2025-09-23 20:43:39.710] No splash screen [2025-09-23 20:43:39.710] stop dss Done [2025-09-23 20:43:39.710] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:43:39.710] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:43:39.743] /dev/mem opened. [2025-09-23 20:43:39.743] Memory mapped at address 0xffff8190f000. [2025-09-23 20:43:39.769] Read at address 0x00600018 (0xffff8190f018): 0x00000000 [2025-09-23 20:43:39.769] Write at address 0x00600018 (0xffff8190f018): 0x00400040, readback 0x00400040 [2025-09-23 20:43:39.801] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:43:39.817] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:43:40.009] Loaded PowerVR consumer services. [2025-09-23 20:43:40.067] 512+0 records in [2025-09-23 20:43:40.067] 512+0 records out [2025-09-23 20:43:40.067] Waiting data available... [2025-09-23 20:43:40.082] Starting syslogd/klogd: done [2025-09-23 20:43:40.098] DML Start [2025-09-23 20:43:40.274] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:43:40.498] DML res1: 0 [2025-09-23 20:43:40.972] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:43:40.972] Read Success [2025-09-23 20:43:40.972] Verifying certificate... [2025-09-23 20:43:41.196] Verified OK [2025-09-23 20:43:41.212] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:43:42.928] Verified OK [2025-09-23 20:43:42.928] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:43:43.497] Verified OK [2025-09-23 20:43:43.497] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:43:46.136] fs.protected_hardlinks = 1 [2025-09-23 20:43:46.136] fs.protected_symlinks = 1 [2025-09-23 20:43:46.151] kernel.modules_disabled = 1 [2025-09-23 20:43:46.360] [2025-09-23 20:43:46.360] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:43:47.569] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:43:55.309] SBL1:1210.0.1.0 [2025-09-23 20:43:55.340] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:43:56.923] SBL2:1210.0.1.0 [2025-09-23 20:43:56.955] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:43:57.068] j-A [2025-09-23 20:44:04.440] The R5 Autosar Classic is running [2025-09-23 20:44:04.440] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:44:04.440] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:44:05.048] INIT: version 2.96 booting [2025-09-23 20:44:05.160] INIT: Entering runlevel: 5 [2025-09-23 20:44:05.304] mtd24 attached [2025-09-23 20:44:05.320] mtd32 attached [2025-09-23 20:44:05.336] mtd28 attached [2025-09-23 20:44:05.384] ubi0:textures is mounted. [2025-09-23 20:44:05.384] RTNETLINK answers: File exists [2025-09-23 20:44:05.442] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:44:05.442] ubi2:animations is mounted. [2025-09-23 20:44:05.442] ubi1:dml_code is mounted. [2025-09-23 20:44:05.442] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:44:05.442] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:44:05.442] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:44:05.442] data.LB_FadeInType0=100 [2025-09-23 20:44:05.442] data.CHLH_FadeInType0=0 [2025-09-23 20:44:05.442] data.WU_FadeInDelay=0 [2025-09-23 20:44:05.442] max_time_out=0 [2025-09-23 20:44:05.442] No splash screen [2025-09-23 20:44:05.442] stop dss Done [2025-09-23 20:44:05.442] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:44:05.514] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:44:05.514] /dev/mem opened. [2025-09-23 20:44:05.514] Memory mapped at address 0xffff94633000. [2025-09-23 20:44:05.514] Read at address 0x00600018 (0xffff94633018): 0x00000000 [2025-09-23 20:44:05.514] Write at address 0x00600018 (0xffff94633018): 0x00400040, readback 0x00400040 [2025-09-23 20:44:05.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:44:05.610] Loaded PowerVR consumer services. [2025-09-23 20:44:05.754] 512+0 records in [2025-09-23 20:44:05.754] 512+0 records out [2025-09-23 20:44:05.770] Waiting data available... [2025-09-23 20:44:05.786] Starting syslogd/klogd: done [2025-09-23 20:44:05.802] DML Start [2025-09-23 20:44:05.978] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:44:06.218] DML res1: 0 [2025-09-23 20:44:06.658] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:44:06.658] Read Success [2025-09-23 20:44:06.658] Verifying certificate... [2025-09-23 20:44:06.898] Verified OK [2025-09-23 20:44:06.914] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:44:08.607] Verified OK [2025-09-23 20:44:08.607] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:44:09.247] Verified OK [2025-09-23 20:44:09.247] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:44:11.965] fs.protected_hardlinks = 1 [2025-09-23 20:44:11.981] fs.protected_symlinks = 1 [2025-09-23 20:44:11.997] kernel.modules_disabled = 1 [2025-09-23 20:44:12.189] [2025-09-23 20:44:12.205] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:44:13.292] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:44:21.040] SBL1:1210.0.1.0 [2025-09-23 20:44:21.088] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:44:22.654] SBL2:1210.0.1.0 [2025-09-23 20:44:22.702] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:44:22.798] j-A [2025-09-23 20:44:30.153] The R5 Autosar Classic is running [2025-09-23 20:44:30.174] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:44:30.174] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:44:30.781] INIT: version 2.96 booting [2025-09-23 20:44:30.893] INIT: Entering runlevel: 5 [2025-09-23 20:44:31.053] mtd24 attached [2025-09-23 20:44:31.053] mtd28 attached [2025-09-23 20:44:31.069] mtd32 attached [2025-09-23 20:44:31.158] ubi0:textures is mounted. [2025-09-23 20:44:31.158] RTNETLINK answers: File exists [2025-09-23 20:44:31.158] ubi1:animations is mounted. [2025-09-23 20:44:31.158] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:44:31.158] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:44:31.158] ubi2:dml_code is mounted. [2025-09-23 20:44:31.158] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:44:31.158] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:44:31.158] data.LB_FadeInType0=100 [2025-09-23 20:44:31.158] data.CHLH_FadeInType0=0 [2025-09-23 20:44:31.184] data.WU_FadeInDelay=0 [2025-09-23 20:44:31.184] max_time_out=0 [2025-09-23 20:44:31.184] No splash screen [2025-09-23 20:44:31.184] stop dss Done [2025-09-23 20:44:31.184] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:44:31.232] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:44:31.232] /dev/mem opened. [2025-09-23 20:44:31.264] Memory mapped at address 0xffffa28b0000. [2025-09-23 20:44:31.264] Read at address 0x00600018 (0xffffa28b0018): 0x00000000 [2025-09-23 20:44:31.264] Write at address 0x00600018 (0xffffa28b0018): 0x00400040, readback 0x00400040 [2025-09-23 20:44:31.264] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:44:31.456] Loaded PowerVR consumer services. [2025-09-23 20:44:31.519] Waiting data available... [2025-09-23 20:44:31.519] 512+0 records in [2025-09-23 20:44:31.519] 512+0 records out [2025-09-23 20:44:31.551] Starting syslogd/klogd: done [2025-09-23 20:44:31.567] DML Start [2025-09-23 20:44:31.727] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:44:31.950] DML res1: 0 [2025-09-23 20:44:32.510] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:44:32.510] Read Success [2025-09-23 20:44:32.510] Verifying certificate... [2025-09-23 20:44:32.750] Verified OK [2025-09-23 20:44:32.781] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:44:34.532] Verified OK [2025-09-23 20:44:34.532] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:44:35.130] Verified OK [2025-09-23 20:44:35.130] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:44:37.641] fs.protected_hardlinks = 1 [2025-09-23 20:44:37.641] fs.protected_symlinks = 1 [2025-09-23 20:44:37.657] kernel.modules_disabled = 1 [2025-09-23 20:44:37.848] [2025-09-23 20:44:37.848] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:44:39.024] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:44:46.799] SBL1:1210.0.1.0 [2025-09-23 20:44:46.831] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:44:48.397] SBL2:1210.0.1.0 [2025-09-23 20:44:48.444] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:44:48.557] j-A [2025-09-23 20:44:55.895] The R5 Autosar Classic is running [2025-09-23 20:44:55.920] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:44:55.920] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:44:56.528] INIT: version 2.96 booting [2025-09-23 20:44:56.623] INIT: Entering runlevel: 5 [2025-09-23 20:44:56.784] mtd24 attached [2025-09-23 20:44:56.784] mtd28 attached [2025-09-23 20:44:56.799] mtd32 attached [2025-09-23 20:44:56.847] ubi0:textures is mounted. [2025-09-23 20:44:56.914] RTNETLINK answers: File exists [2025-09-23 20:44:56.914] ubi1:animations is mounted. [2025-09-23 20:44:56.914] ubi2:dml_code is mounted. [2025-09-23 20:44:56.914] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:44:56.914] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:44:56.914] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:44:56.914] data.LB_FadeInType0=100 [2025-09-23 20:44:56.914] data.CHLH_FadeInType0=0 [2025-09-23 20:44:56.914] data.WU_FadeInDelay=0 [2025-09-23 20:44:56.914] max_time_out=0 [2025-09-23 20:44:56.914] No splash screen [2025-09-23 20:44:56.914] stop dss Done [2025-09-23 20:44:56.914] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:44:56.914] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:44:56.979] /dev/mem opened. [2025-09-23 20:44:56.979] Memory mapped at address 0xffffab844000. [2025-09-23 20:44:56.979] Read at address 0x00600018 (0xffffab844018): 0x00000000 [2025-09-23 20:44:56.979] Write at address 0x00600018 (0xffffab844018): 0x00400040, readback 0x00400040 [2025-09-23 20:44:57.024] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:44:57.024] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:44:57.072] Loaded PowerVR consumer services. [2025-09-23 20:44:57.239] 512+0 records in [2025-09-23 20:44:57.239] 512+0 records out [2025-09-23 20:44:57.239] Waiting data available... [2025-09-23 20:44:57.271] Starting syslogd/klogd: done [2025-09-23 20:44:57.287] DML Start [2025-09-23 20:44:57.463] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:44:57.671] DML res1: 0 [2025-09-23 20:44:58.176] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:44:58.176] Read Success [2025-09-23 20:44:58.176] Verifying certificate... [2025-09-23 20:44:58.464] Verified OK [2025-09-23 20:44:58.496] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:45:00.334] Verified OK [2025-09-23 20:45:00.334] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:45:00.828] Verified OK [2025-09-23 20:45:00.828] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:45:03.195] fs.protected_hardlinks = 1 [2025-09-23 20:45:03.210] fs.protected_symlinks = 1 [2025-09-23 20:45:03.210] kernel.modules_disabled = 1 [2025-09-23 20:45:03.418] [2025-09-23 20:45:03.418] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:45:04.729] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:45:12.533] SBL1:1210.0.1.0 [2025-09-23 20:45:12.581] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:45:14.148] SBL2:1210.0.1.0 [2025-09-23 20:45:14.196] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:45:14.292] j-A [2025-09-23 20:45:21.645] The R5 Autosar Classic is running [2025-09-23 20:45:21.670] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:45:21.670] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:45:22.278] INIT: version 2.96 booting [2025-09-23 20:45:22.390] INIT: Entering runlevel: 5 [2025-09-23 20:45:22.550] mtd32 attached [2025-09-23 20:45:22.550] mtd28 attached [2025-09-23 20:45:22.566] mtd24 attached [2025-09-23 20:45:22.598] RTNETLINK answers: File exists [2025-09-23 20:45:22.650] ubi0:dml_code is mounted. [2025-09-23 20:45:22.650] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:45:22.650] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:45:22.650] ubi1:animations is mounted. [2025-09-23 20:45:22.650] ubi2:textures is mounted. [2025-09-23 20:45:22.650] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:45:22.650] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:45:22.650] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:45:22.678] data.LB_FadeInType0=100 [2025-09-23 20:45:22.678] data.CHLH_FadeInType0=0 [2025-09-23 20:45:22.678] data.WU_FadeInDelay=0 [2025-09-23 20:45:22.678] max_time_out=0 [2025-09-23 20:45:22.678] No splash screen [2025-09-23 20:45:22.678] stop dss Done [2025-09-23 20:45:22.703] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:45:22.703] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:45:22.734] /dev/mem opened. [2025-09-23 20:45:22.734] Memory mapped at address 0xffff8ad2c000. [2025-09-23 20:45:22.761] Read at address 0x00600018 (0xffff8ad2c018): 0x00000000 [2025-09-23 20:45:22.761] Write at address 0x00600018 (0xffff8ad2c018): 0x00400040, readback 0x00400040 [2025-09-23 20:45:22.841] Loaded PowerVR consumer services. [2025-09-23 20:45:22.996] Waiting data available... [2025-09-23 20:45:22.996] 512+0 records in [2025-09-23 20:45:22.996] 512+0 records out [2025-09-23 20:45:23.028] Starting syslogd/klogd: done [2025-09-23 20:45:23.060] DML Start [2025-09-23 20:45:23.220] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:45:23.475] DML res1: 0 [2025-09-23 20:45:23.950] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:45:23.950] Read Success [2025-09-23 20:45:23.950] Verifying certificate... [2025-09-23 20:45:24.253] Verified OK [2025-09-23 20:45:24.286] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:45:25.956] Verified OK [2025-09-23 20:45:25.956] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:45:26.540] Verified OK [2025-09-23 20:45:26.540] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:45:29.034] fs.protected_hardlinks = 1 [2025-09-23 20:45:29.034] fs.protected_symlinks = 1 [2025-09-23 20:45:29.051] kernel.modules_disabled = 1 [2025-09-23 20:45:29.243] [2025-09-23 20:45:29.243] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:45:30.561] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:45:38.290] SBL1:1210.0.1.0 [2025-09-23 20:45:38.322] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:45:39.906] SBL2:1210.0.1.0 [2025-09-23 20:45:39.937] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:45:40.049] j-A [2025-09-23 20:45:47.418] The R5 Autosar Classic is running [2025-09-23 20:45:47.418] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:45:47.418] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:45:48.025] INIT: version 2.96 booting [2025-09-23 20:45:48.137] INIT: Entering runlevel: 5 [2025-09-23 20:45:48.297] mtd28 attached [2025-09-23 20:45:48.297] mtd24 attached [2025-09-23 20:45:48.313] mtd32 attached [2025-09-23 20:45:48.361] RTNETLINK answers: File exists [2025-09-23 20:45:48.361] ubi1:textures is mounted. [2025-09-23 20:45:48.405] ubi0:animations is mounted. [2025-09-23 20:45:48.405] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:45:48.405] ubi2:dml_code is mounted. [2025-09-23 20:45:48.405] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:45:48.405] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:45:48.405] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:45:48.405] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:45:48.405] data.LB_FadeInType0=100 [2025-09-23 20:45:48.405] data.CHLH_FadeInType0=0 [2025-09-23 20:45:48.426] data.WU_FadeInDelay=0 [2025-09-23 20:45:48.426] max_time_out=0 [2025-09-23 20:45:48.426] No splash screen [2025-09-23 20:45:48.426] stop dss Done [2025-09-23 20:45:48.458] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:45:48.474] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:45:48.506] /dev/mem opened. [2025-09-23 20:45:48.506] Memory mapped at address 0xffffa13cf000. [2025-09-23 20:45:48.506] Read at address 0x00600018 (0xffffa13cf018): 0x00000000 [2025-09-23 20:45:48.506] Write at address 0x00600018 (0xffffa13cf018): 0x00400040, readback 0x00400040 [2025-09-23 20:45:48.698] Loaded PowerVR consumer services. [2025-09-23 20:45:48.746] Waiting data available... [2025-09-23 20:45:48.762] 512+0 records in [2025-09-23 20:45:48.762] 512+0 records out [2025-09-23 20:45:48.794] Starting syslogd/klogd: done [2025-09-23 20:45:48.810] DML Start [2025-09-23 20:45:49.002] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:45:49.210] DML res1: 0 [2025-09-23 20:45:49.651] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:45:49.651] Read Success [2025-09-23 20:45:49.651] Verifying certificate... [2025-09-23 20:45:49.875] Verified OK [2025-09-23 20:45:49.890] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:45:51.649] Verified OK [2025-09-23 20:45:51.665] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:45:52.256] Verified OK [2025-09-23 20:45:52.273] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:45:54.845] fs.protected_hardlinks = 1 [2025-09-23 20:45:54.845] fs.protected_symlinks = 1 [2025-09-23 20:45:54.845] kernel.modules_disabled = 1 [2025-09-23 20:45:55.037] [2025-09-23 20:45:55.037] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:45:56.283] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:46:04.019] SBL1:1210.0.1.0 [2025-09-23 20:46:04.067] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:46:05.635] SBL2:1210.0.1.0 [2025-09-23 20:46:05.682] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:46:05.778] j-A [2025-09-23 20:46:13.134] The R5 Autosar Classic is running [2025-09-23 20:46:13.156] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:46:13.156] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:46:13.763] INIT: version 2.96 booting [2025-09-23 20:46:13.875] INIT: Entering runlevel: 5 [2025-09-23 20:46:14.035] mtd32 attached [2025-09-23 20:46:14.051] mtd24 attached [2025-09-23 20:46:14.051] mtd28 attached [2025-09-23 20:46:14.099] RTNETLINK answers: File exists [2025-09-23 20:46:14.167] ubi0:dml_code is mounted. [2025-09-23 20:46:14.167] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:46:14.167] ubi1:textures is mounted. [2025-09-23 20:46:14.167] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:46:14.167] ubi2:animations is mounted. [2025-09-23 20:46:14.167] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:46:14.167] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:46:14.167] data.LB_FadeInType0=100 [2025-09-23 20:46:14.167] data.CHLH_FadeInType0=0 [2025-09-23 20:46:14.167] data.WU_FadeInDelay=0 [2025-09-23 20:46:14.167] max_time_out=0 [2025-09-23 20:46:14.167] No splash screen [2025-09-23 20:46:14.167] stop dss Done [2025-09-23 20:46:14.167] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:46:14.231] /dev/mem opened. [2025-09-23 20:46:14.231] Memory mapped at address 0xffffbe99d000. [2025-09-23 20:46:14.231] Read at address 0x00600018 (0xffffbe99d018): 0x00000000 [2025-09-23 20:46:14.231] Write at address 0x00600018 (0xffffbe99d018): 0x00400040, readback 0x00400040 [2025-09-23 20:46:14.263] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:46:14.295] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:46:14.455] Loaded PowerVR consumer services. [2025-09-23 20:46:14.487] 512+0 records in [2025-09-23 20:46:14.487] 512+0 records out [2025-09-23 20:46:14.519] Waiting data available... [2025-09-23 20:46:14.535] Starting syslogd/klogd: done [2025-09-23 20:46:14.551] DML Start [2025-09-23 20:46:14.710] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:46:14.950] DML res1: 0 [2025-09-23 20:46:15.424] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:46:15.424] Read Success [2025-09-23 20:46:15.424] Verifying certificate... [2025-09-23 20:46:15.680] Verified OK [2025-09-23 20:46:15.696] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:46:17.455] Verified OK [2025-09-23 20:46:17.455] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:46:17.983] Verified OK [2025-09-23 20:46:17.983] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:46:20.396] fs.protected_hardlinks = 1 [2025-09-23 20:46:20.396] fs.protected_symlinks = 1 [2025-09-23 20:46:20.412] kernel.modules_disabled = 1 [2025-09-23 20:46:20.604] [2025-09-23 20:46:20.604] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:46:22.053] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:46:29.753] SBL1:1210.0.1.0 [2025-09-23 20:46:29.785] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:46:31.368] SBL2:1210.0.1.0 [2025-09-23 20:46:31.400] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:46:31.512] j-A [2025-09-23 20:46:38.886] The R5 Autosar Classic is running [2025-09-23 20:46:38.886] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:46:38.886] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:46:39.493] INIT: version 2.96 booting [2025-09-23 20:46:39.605] INIT: Entering runlevel: 5 [2025-09-23 20:46:39.749] mtd24 attached [2025-09-23 20:46:39.765] mtd32 attached [2025-09-23 20:46:39.781] mtd28 attached [2025-09-23 20:46:39.829] ubi0:textures is mounted. [2025-09-23 20:46:39.829] RTNETLINK answers: File exists [2025-09-23 20:46:39.886] ubi2:animations is mounted. [2025-09-23 20:46:39.886] ubi1:dml_code is mounted. [2025-09-23 20:46:39.886] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:46:39.886] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:46:39.886] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:46:39.886] data.LB_FadeInType0=100 [2025-09-23 20:46:39.886] data.CHLH_FadeInType0=0 [2025-09-23 20:46:39.886] data.WU_FadeInDelay=0 [2025-09-23 20:46:39.886] max_time_out=0 [2025-09-23 20:46:39.886] No splash screen [2025-09-23 20:46:39.886] stop dss Done [2025-09-23 20:46:39.886] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:46:39.886] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:46:39.933] /dev/mem opened. [2025-09-23 20:46:39.966] Memory mapped at address 0xffffbc578000. [2025-09-23 20:46:39.966] Read at address 0x00600018 (0xffffbc578018): 0x00000000 [2025-09-23 20:46:39.966] Write at address 0x00600018 (0xffffbc578018): 0x00400040, readback 0x00400040 [2025-09-23 20:46:39.997] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:46:39.997] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:46:40.061] Loaded PowerVR consumer services. [2025-09-23 20:46:40.219] Waiting data available... [2025-09-23 20:46:40.219] 512+0 records in [2025-09-23 20:46:40.219] 512+0 records out [2025-09-23 20:46:40.250] Starting syslogd/klogd: done [2025-09-23 20:46:40.266] DML Start [2025-09-23 20:46:40.442] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:46:40.682] DML res1: 0 [2025-09-23 20:46:41.114] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:46:41.114] Read Success [2025-09-23 20:46:41.130] Verifying certificate... [2025-09-23 20:46:41.353] Verified OK [2025-09-23 20:46:41.370] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:46:43.013] Verified OK [2025-09-23 20:46:43.013] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:46:43.589] Verified OK [2025-09-23 20:46:43.589] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:46:46.194] fs.protected_hardlinks = 1 [2025-09-23 20:46:46.223] fs.protected_symlinks = 1 [2025-09-23 20:46:46.223] kernel.modules_disabled = 1 [2025-09-23 20:46:46.399] [2025-09-23 20:46:46.399] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:46:47.802] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:46:55.507] SBL1:1210.0.1.0 [2025-09-23 20:46:55.555] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:46:57.121] SBL2:1210.0.1.0 [2025-09-23 20:46:57.169] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:46:57.265] j-A [2025-09-23 20:47:04.621] The R5 Autosar Classic is running [2025-09-23 20:47:04.644] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:47:04.644] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:47:05.252] INIT: version 2.96 booting [2025-09-23 20:47:05.363] INIT: Entering runlevel: 5 [2025-09-23 20:47:05.507] mtd24 attached [2025-09-23 20:47:05.523] mtd28 attached [2025-09-23 20:47:05.539] mtd32 attached [2025-09-23 20:47:05.571] ubi0:textures is mounted. [2025-09-23 20:47:05.587] ubi1:animations is mounted. [2025-09-23 20:47:05.587] RTNETLINK answers: File exists [2025-09-23 20:47:05.649] ubi2:dml_code is mounted. [2025-09-23 20:47:05.649] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:47:05.649] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:47:05.649] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:47:05.649] data.LB_FadeInType0=100 [2025-09-23 20:47:05.649] data.CHLH_FadeInType0=0 [2025-09-23 20:47:05.649] data.WU_FadeInDelay=0 [2025-09-23 20:47:05.649] max_time_out=0 [2025-09-23 20:47:05.649] No splash screen [2025-09-23 20:47:05.649] stop dss Done [2025-09-23 20:47:05.649] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:47:05.649] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:47:05.723] /dev/mem opened. [2025-09-23 20:47:05.723] Memory mapped at address 0xffff896a0000. [2025-09-23 20:47:05.723] Read at address 0x00600018 (0xffff896a0018): 0x00000000 [2025-09-23 20:47:05.723] Write at address 0x00600018 (0xffff896a0018): 0x00400040, readback 0x00400040 [2025-09-23 20:47:05.786] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:47:05.786] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:47:05.882] Loaded PowerVR consumer services. [2025-09-23 20:47:05.993] Waiting data available... [2025-09-23 20:47:05.993] 512+0 records in [2025-09-23 20:47:05.993] 512+0 records out [2025-09-23 20:47:06.025] Starting syslogd/klogd: done [2025-09-23 20:47:06.057] DML Start [2025-09-23 20:47:06.217] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:47:06.392] DML res1: 0 [2025-09-23 20:47:06.968] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:47:06.984] Read Success [2025-09-23 20:47:06.984] Verifying certificate... [2025-09-23 20:47:07.240] Verified OK [2025-09-23 20:47:07.256] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:47:08.935] Verified OK [2025-09-23 20:47:08.935] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:47:09.538] Verified OK [2025-09-23 20:47:09.538] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:47:12.047] fs.protected_hardlinks = 1 [2025-09-23 20:47:12.047] fs.protected_symlinks = 1 [2025-09-23 20:47:12.063] kernel.modules_disabled = 1 [2025-09-23 20:47:12.255] [2025-09-23 20:47:12.255] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:47:13.537] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:47:21.262] SBL1:1210.0.1.0 [2025-09-23 20:47:21.310] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:47:22.876] SBL2:1210.0.1.0 [2025-09-23 20:47:22.924] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:47:23.020] j-A [2025-09-23 20:47:30.376] The R5 Autosar Classic is running [2025-09-23 20:47:30.376] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:47:30.397] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:47:31.005] INIT: version 2.96 booting [2025-09-23 20:47:31.116] INIT: Entering runlevel: 5 [2025-09-23 20:47:31.261] mtd24 attached [2025-09-23 20:47:31.277] mtd28 attached [2025-09-23 20:47:31.293] mtd32 attached [2025-09-23 20:47:31.340] ubi0:textures is mounted. [2025-09-23 20:47:31.340] RTNETLINK answers: File exists [2025-09-23 20:47:31.395] ubi2:dml_code is mounted. [2025-09-23 20:47:31.395] ubi1:animations is mounted. [2025-09-23 20:47:31.395] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:47:31.395] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:47:31.395] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:47:31.395] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:47:31.395] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:47:31.395] data.LB_FadeInType0=100 [2025-09-23 20:47:31.395] data.CHLH_FadeInType0=0 [2025-09-23 20:47:31.395] data.WU_FadeInDelay=0 [2025-09-23 20:47:31.395] max_time_out=0 [2025-09-23 20:47:31.395] No splash screen [2025-09-23 20:47:31.395] stop dss Done [2025-09-23 20:47:31.443] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:47:31.482] /dev/mem opened. [2025-09-23 20:47:31.482] Memory mapped at address 0xffffb1e82000. [2025-09-23 20:47:31.482] Read at address 0x00600018 (0xffffb1e82018): 0x00000000 [2025-09-23 20:47:31.482] Write at address 0x00600018 (0xffffb1e82018): 0x00400040, readback 0x00400040 [2025-09-23 20:47:31.482] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:47:31.689] Loaded PowerVR consumer services. [2025-09-23 20:47:31.765] 512+0 records in [2025-09-23 20:47:31.765] 512+0 records out [2025-09-23 20:47:31.765] Waiting data available... [2025-09-23 20:47:31.797] Starting syslogd/klogd: done [2025-09-23 20:47:31.813] DML Start [2025-09-23 20:47:31.974] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:47:32.213] DML res1: 0 [2025-09-23 20:47:32.637] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:47:32.637] Read Success [2025-09-23 20:47:32.637] Verifying certificate... [2025-09-23 20:47:32.861] Verified OK [2025-09-23 20:47:32.877] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:47:34.594] Verified OK [2025-09-23 20:47:34.594] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:47:35.246] Verified OK [2025-09-23 20:47:35.246] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:47:37.820] fs.protected_hardlinks = 1 [2025-09-23 20:47:37.820] fs.protected_symlinks = 1 [2025-09-23 20:47:37.836] kernel.modules_disabled = 1 [2025-09-23 20:47:38.028] [2025-09-23 20:47:38.028] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:47:39.264] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:47:47.019] SBL1:1210.0.1.0 [2025-09-23 20:47:47.051] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:47:48.634] SBL2:1210.0.1.0 [2025-09-23 20:47:48.666] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:47:48.778] j-A [2025-09-23 20:47:56.152] The R5 Autosar Classic is running [2025-09-23 20:47:56.152] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:47:56.152] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:47:56.760] INIT: version 2.96 booting [2025-09-23 20:47:56.871] INIT: Entering runlevel: 5 [2025-09-23 20:47:57.031] mtd28 attached [2025-09-23 20:47:57.031] mtd24 attached [2025-09-23 20:47:57.047] mtd32 attached [2025-09-23 20:47:57.095] ubi0:animations is mounted. [2025-09-23 20:47:57.095] RTNETLINK answers: File exists [2025-09-23 20:47:57.132] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:47:57.132] ubi1:textures is mounted. [2025-09-23 20:47:57.132] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:47:57.132] ubi2:dml_code is mounted. [2025-09-23 20:47:57.132] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:47:57.132] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:47:57.132] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:47:57.156] data.LB_FadeInType0=100 [2025-09-23 20:47:57.156] data.CHLH_FadeInType0=0 [2025-09-23 20:47:57.156] data.WU_FadeInDelay=0 [2025-09-23 20:47:57.156] max_time_out=0 [2025-09-23 20:47:57.156] No splash screen [2025-09-23 20:47:57.156] stop dss Done [2025-09-23 20:47:57.198] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:47:57.198] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:47:57.236] /dev/mem opened. [2025-09-23 20:47:57.236] Memory mapped at address 0xffff96853000. [2025-09-23 20:47:57.236] Read at address 0x00600018 (0xffff96853018): 0x00000000 [2025-09-23 20:47:57.236] Write at address 0x00600018 (0xffff96853018): 0x00400040, readback 0x00400040 [2025-09-23 20:47:57.332] Loaded PowerVR consumer services. [2025-09-23 20:47:57.476] Waiting data available... [2025-09-23 20:47:57.476] 512+0 records in [2025-09-23 20:47:57.476] 512+0 records out [2025-09-23 20:47:57.508] Starting syslogd/klogd: done [2025-09-23 20:47:57.524] DML Start [2025-09-23 20:47:57.668] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:47:57.892] DML res1: 0 [2025-09-23 20:47:58.396] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:47:58.396] Read Success [2025-09-23 20:47:58.396] Verifying certificate... [2025-09-23 20:47:58.683] Verified OK [2025-09-23 20:47:58.699] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:48:00.255] Verified OK [2025-09-23 20:48:00.255] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:48:00.855] Verified OK [2025-09-23 20:48:00.855] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:48:03.510] fs.protected_hardlinks = 1 [2025-09-23 20:48:03.537] fs.protected_symlinks = 1 [2025-09-23 20:48:03.537] kernel.modules_disabled = 1 [2025-09-23 20:48:03.712] [2025-09-23 20:48:03.712] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:48:05.034] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:48:12.765] SBL1:1210.0.1.0 [2025-09-23 20:48:12.797] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:48:14.379] SBL2:1210.0.1.0 [2025-09-23 20:48:14.411] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 20:48:14.523] j-A [2025-09-23 20:48:21.897] The R5 Autosar Classic is running [2025-09-23 20:48:21.897] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:48:21.897] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:48:22.505] INIT: version 2.96 booting [2025-09-23 20:48:22.616] INIT: Entering runlevel: 5 [2025-09-23 20:48:22.776] mtd28 attached [2025-09-23 20:48:22.776] mtd24 attached [2025-09-23 20:48:22.792] mtd32 attached [2025-09-23 20:48:22.899] ubi0:animations is mounted. [2025-09-23 20:48:22.899] RTNETLINK answers: File exists [2025-09-23 20:48:22.899] ubi1:textures is mounted. [2025-09-23 20:48:22.899] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:48:22.899] ubi2:dml_code is mounted. [2025-09-23 20:48:22.899] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:48:22.899] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:48:22.899] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:48:22.899] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:48:22.899] data.LB_FadeInType0=100 [2025-09-23 20:48:22.899] data.CHLH_FadeInType0=0 [2025-09-23 20:48:22.899] data.WU_FadeInDelay=0 [2025-09-23 20:48:22.899] max_time_out=0 [2025-09-23 20:48:22.899] No splash screen [2025-09-23 20:48:22.899] stop dss Done [2025-09-23 20:48:22.987] /dev/mem opened. [2025-09-23 20:48:22.987] Memory mapped at address 0xffffb43be000. [2025-09-23 20:48:22.987] Read at address 0x00600018 (0xffffb43be018): 0x00000000 [2025-09-23 20:48:22.987] Write at address 0x00600018 (0xffffb43be018): 0x00400040, readback 0x00400040 [2025-09-23 20:48:22.987] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:48:23.003] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:48:23.067] Loaded PowerVR consumer services. [2025-09-23 20:48:23.211] 512+0 records in [2025-09-23 20:48:23.211] 512+0 records out [2025-09-23 20:48:23.211] Waiting data available... [2025-09-23 20:48:23.258] Starting syslogd/klogd: done [2025-09-23 20:48:23.275] DML Start [2025-09-23 20:48:23.451] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:48:23.675] DML res1: 0 [2025-09-23 20:48:24.134] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:48:24.134] Read Success [2025-09-23 20:48:24.134] Verifying certificate... [2025-09-23 20:48:24.374] Verified OK [2025-09-23 20:48:24.390] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:48:26.143] Verified OK [2025-09-23 20:48:26.143] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:48:26.693] Verified OK [2025-09-23 20:48:26.693] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:48:29.204] fs.protected_hardlinks = 1 [2025-09-23 20:48:29.204] fs.protected_symlinks = 1 [2025-09-23 20:48:29.219] kernel.modules_disabled = 1 [2025-09-23 20:48:29.411] [2025-09-23 20:48:29.411] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:48:30.731] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:48:38.523] SBL1:1210.0.1.0 [2025-09-23 20:48:38.571] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:48:40.139] SBL2:1210.0.1.0 [2025-09-23 20:48:40.186] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:48:40.282] j-A [2025-09-23 20:48:47.636] The R5 Autosar Classic is running [2025-09-23 20:48:47.661] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:48:47.661] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:48:48.269] INIT: version 2.96 booting [2025-09-23 20:48:48.380] INIT: Entering runlevel: 5 [2025-09-23 20:48:48.525] mtd28 attached [2025-09-23 20:48:48.540] mtd32 attached [2025-09-23 20:48:48.540] mtd24 attached [2025-09-23 20:48:48.605] ubi0:animations is mounted. [2025-09-23 20:48:48.605] RTNETLINK answers: File exists [2025-09-23 20:48:48.661] ubi2:textures is mounted. [2025-09-23 20:48:48.661] ubi1:dml_code is mounted. [2025-09-23 20:48:48.661] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:48:48.661] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:48:48.661] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:48:48.661] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:48:48.661] data.LB_FadeInType0=100 [2025-09-23 20:48:48.661] data.CHLH_FadeInType0=0 [2025-09-23 20:48:48.661] data.WU_FadeInDelay=0 [2025-09-23 20:48:48.661] max_time_out=0 [2025-09-23 20:48:48.661] No splash screen [2025-09-23 20:48:48.661] stop dss Done [2025-09-23 20:48:48.661] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:48:48.723] /dev/mem opened. [2025-09-23 20:48:48.723] Memory mapped at address 0xffffb6ee4000. [2025-09-23 20:48:48.723] Read at address 0x00600018 (0xffffb6ee4018): 0x00000000 [2025-09-23 20:48:48.723] Write at address 0x00600018 (0xffffb6ee4018): 0x00400040, readback 0x00400040 [2025-09-23 20:48:48.723] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:48:48.723] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:48:48.820] Loaded PowerVR consumer services. [2025-09-23 20:48:48.979] Waiting data available... [2025-09-23 20:48:48.995] 512+0 records in [2025-09-23 20:48:48.995] 512+0 records out [2025-09-23 20:48:49.011] Starting syslogd/klogd: done [2025-09-23 20:48:49.043] DML Start [2025-09-23 20:48:49.235] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:48:49.459] DML res1: 0 [2025-09-23 20:48:49.870] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:48:49.870] Read Success [2025-09-23 20:48:49.870] Verifying certificate... [2025-09-23 20:48:50.111] Verified OK [2025-09-23 20:48:50.127] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:48:51.869] Verified OK [2025-09-23 20:48:51.869] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:48:52.491] Verified OK [2025-09-23 20:48:52.491] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:48:55.050] fs.protected_hardlinks = 1 [2025-09-23 20:48:55.050] fs.protected_symlinks = 1 [2025-09-23 20:48:55.066] kernel.modules_disabled = 1 [2025-09-23 20:48:55.257] [2025-09-23 20:48:55.257] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:48:56.530] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:49:04.282] SBL1:1210.0.1.0 [2025-09-23 20:49:04.330] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:49:05.897] SBL2:1210.0.1.0 [2025-09-23 20:49:05.945] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:49:06.041] j-A [2025-09-23 20:49:13.394] The R5 Autosar Classic is running [2025-09-23 20:49:13.419] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:49:13.419] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:49:14.027] INIT: version 2.96 booting [2025-09-23 20:49:14.138] INIT: Entering runlevel: 5 [2025-09-23 20:49:14.298] mtd24 attached [2025-09-23 20:49:14.299] mtd28 attached [2025-09-23 20:49:14.314] mtd32 attached [2025-09-23 20:49:14.346] ubi0:textures is mounted. [2025-09-23 20:49:14.362] RTNETLINK answers: File exists [2025-09-23 20:49:14.427] ubi1:animations is mounted. [2025-09-23 20:49:14.427] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:49:14.427] ubi2:dml_code is mounted. [2025-09-23 20:49:14.427] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:49:14.427] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:49:14.427] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:49:14.427] data.LB_FadeInType0=100 [2025-09-23 20:49:14.427] data.CHLH_FadeInType0=0 [2025-09-23 20:49:14.427] data.WU_FadeInDelay=0 [2025-09-23 20:49:14.427] max_time_out=0 [2025-09-23 20:49:14.427] No splash screen [2025-09-23 20:49:14.427] stop dss Done [2025-09-23 20:49:14.427] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:49:14.512] /dev/mem opened. [2025-09-23 20:49:14.512] Memory mapped at address 0xffffad007000. [2025-09-23 20:49:14.512] Read at address 0x00600018 (0xffffad007018): 0x00000000 [2025-09-23 20:49:14.512] Write at address 0x00600018 (0xffffad007018): 0x00400040, readback 0x00400040 [2025-09-23 20:49:14.512] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:49:14.512] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:49:14.719] Loaded PowerVR consumer services. [2025-09-23 20:49:14.735] Waiting data available... [2025-09-23 20:49:14.751] 512+0 records in [2025-09-23 20:49:14.751] 512+0 records out [2025-09-23 20:49:14.799] Starting syslogd/klogd: done [2025-09-23 20:49:14.815] DML Start [2025-09-23 20:49:14.975] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:49:15.199] DML res1: 0 [2025-09-23 20:49:15.609] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:49:15.609] Read Success [2025-09-23 20:49:15.609] Verifying certificate... [2025-09-23 20:49:15.896] Verified OK [2025-09-23 20:49:15.912] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:49:17.511] Verified OK [2025-09-23 20:49:17.511] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:49:18.127] Verified OK [2025-09-23 20:49:18.127] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:49:20.827] fs.protected_hardlinks = 1 [2025-09-23 20:49:20.827] fs.protected_symlinks = 1 [2025-09-23 20:49:20.827] kernel.modules_disabled = 1 [2025-09-23 20:49:21.019] [2025-09-23 20:49:21.019] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:49:22.327] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:49:30.017] SBL1:1210.0.1.0 [2025-09-23 20:49:30.049] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:49:31.632] SBL2:1210.0.1.0 [2025-09-23 20:49:31.664] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:49:31.776] j-A [2025-09-23 20:49:39.149] The R5 Autosar Classic is running [2025-09-23 20:49:39.149] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:49:39.149] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:49:39.756] INIT: version 2.96 booting [2025-09-23 20:49:39.868] INIT: Entering runlevel: 5 [2025-09-23 20:49:40.012] mtd24 attached [2025-09-23 20:49:40.028] mtd32 attached [2025-09-23 20:49:40.044] mtd28 attached [2025-09-23 20:49:40.076] ubi0:textures is mounted. [2025-09-23 20:49:40.092] ubi1:dml_code is mounted. [2025-09-23 20:49:40.092] RTNETLINK answers: File exists [2025-09-23 20:49:40.108] ubi2:animations is mounted. [2025-09-23 20:49:40.108] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:49:40.154] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:49:40.154] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:49:40.154] data.LB_FadeInType0=100 [2025-09-23 20:49:40.154] data.CHLH_FadeInType0=0 [2025-09-23 20:49:40.154] data.WU_FadeInDelay=0 [2025-09-23 20:49:40.154] max_time_out=0 [2025-09-23 20:49:40.154] No splash screen [2025-09-23 20:49:40.154] stop dss Done [2025-09-23 20:49:40.154] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:49:40.154] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:49:40.219] /dev/mem opened. [2025-09-23 20:49:40.219] Memory mapped at address 0xffffa2bd9000. [2025-09-23 20:49:40.219] Read at address 0x00600018 (0xffffa2bd9018): 0x00000000 [2025-09-23 20:49:40.219] Write at address 0x00600018 (0xffffa2bd9018): 0x00400040, readback 0x00400040 [2025-09-23 20:49:40.251] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:49:40.267] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:49:40.426] Loaded PowerVR consumer services. [2025-09-23 20:49:40.475] Waiting data available... [2025-09-23 20:49:40.491] 512+0 records in [2025-09-23 20:49:40.491] 512+0 records out [2025-09-23 20:49:40.539] Starting syslogd/klogd: done [2025-09-23 20:49:40.555] DML Start [2025-09-23 20:49:40.714] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:49:40.955] DML res1: 0 [2025-09-23 20:49:41.411] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:49:41.411] Read Success [2025-09-23 20:49:41.411] Verifying certificate... [2025-09-23 20:49:41.666] Verified OK [2025-09-23 20:49:41.682] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:49:43.453] Verified OK [2025-09-23 20:49:43.453] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:49:44.081] Verified OK [2025-09-23 20:49:44.081] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:49:46.640] fs.protected_hardlinks = 1 [2025-09-23 20:49:46.640] fs.protected_symlinks = 1 [2025-09-23 20:49:46.656] kernel.modules_disabled = 1 [2025-09-23 20:49:46.848] [2025-09-23 20:49:46.848] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:49:48.007] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:49:55.754] SBL1:1210.0.1.0 [2025-09-23 20:49:55.802] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:49:57.368] SBL2:1210.0.1.0 [2025-09-23 20:49:57.416] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:49:57.512] j-A [2025-09-23 20:50:04.867] The R5 Autosar Classic is running [2025-09-23 20:50:04.867] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:50:04.888] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:50:05.495] INIT: version 2.96 booting [2025-09-23 20:50:05.607] INIT: Entering runlevel: 5 [2025-09-23 20:50:05.766] mtd32 attached [2025-09-23 20:50:05.766] mtd28 attached [2025-09-23 20:50:05.782] mtd24 attached [2025-09-23 20:50:05.831] ubi0:dml_code is mounted. [2025-09-23 20:50:05.831] RTNETLINK answers: File exists [2025-09-23 20:50:05.875] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:50:05.875] ubi2:textures is mounted. [2025-09-23 20:50:05.875] ubi1:animations is mounted. [2025-09-23 20:50:05.875] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:50:05.875] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:50:05.875] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:50:05.875] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:50:05.901] data.LB_FadeInType0=100 [2025-09-23 20:50:05.901] data.CHLH_FadeInType0=0 [2025-09-23 20:50:05.901] data.WU_FadeInDelay=0 [2025-09-23 20:50:05.901] max_time_out=0 [2025-09-23 20:50:05.901] No splash screen [2025-09-23 20:50:05.901] stop dss Done [2025-09-23 20:50:05.965] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:50:06.000] /dev/mem opened. [2025-09-23 20:50:06.000] Memory mapped at address 0xffffaf4be000. [2025-09-23 20:50:06.000] Read at address 0x00600018 (0xffffaf4be018): 0x00000000 [2025-09-23 20:50:06.000] Write at address 0x00600018 (0xffffaf4be018): 0x00400040, readback 0x00400040 [2025-09-23 20:50:06.000] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:50:06.175] Loaded PowerVR consumer services. [2025-09-23 20:50:06.191] 512+0 records in [2025-09-23 20:50:06.207] 512+0 records out [2025-09-23 20:50:06.224] Starting syslogd/klogd: done [2025-09-23 20:50:06.335] Waiting data available... [2025-09-23 20:50:06.335] DML Start [2025-09-23 20:50:06.527] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:50:06.735] DML res1: 0 [2025-09-23 20:50:07.111] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:50:07.111] Read Success [2025-09-23 20:50:07.111] Verifying certificate... [2025-09-23 20:50:07.351] Verified OK [2025-09-23 20:50:07.367] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:50:08.965] Verified OK [2025-09-23 20:50:08.965] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:50:09.689] Verified OK [2025-09-23 20:50:09.689] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:50:12.328] fs.protected_hardlinks = 1 [2025-09-23 20:50:12.328] fs.protected_symlinks = 1 [2025-09-23 20:50:12.344] kernel.modules_disabled = 1 [2025-09-23 20:50:12.535] [2025-09-23 20:50:12.535] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:50:13.766] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:50:21.489] SBL1:1210.0.1.0 [2025-09-23 20:50:21.521] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:50:23.104] SBL2:1210.0.1.0 [2025-09-23 20:50:23.136] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:50:23.248] j-A [2025-09-23 20:50:30.622] The R5 Autosar Classic is running [2025-09-23 20:50:30.622] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:50:30.622] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:50:31.230] INIT: version 2.96 booting [2025-09-23 20:50:31.342] INIT: Entering runlevel: 5 [2025-09-23 20:50:31.501] mtd28 attached [2025-09-23 20:50:31.501] mtd32 attached [2025-09-23 20:50:31.517] mtd24 attached [2025-09-23 20:50:31.565] ubi0:animations is mounted. [2025-09-23 20:50:31.565] RTNETLINK answers: File exists [2025-09-23 20:50:31.603] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:50:31.603] ubi1:dml_code is mounted. [2025-09-23 20:50:31.603] ubi2:textures is mounted. [2025-09-23 20:50:31.603] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:50:31.603] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:50:31.603] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:50:31.603] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:50:31.625] data.LB_FadeInType0=100 [2025-09-23 20:50:31.625] data.CHLH_FadeInType0=0 [2025-09-23 20:50:31.625] data.WU_FadeInDelay=0 [2025-09-23 20:50:31.625] max_time_out=0 [2025-09-23 20:50:31.625] No splash screen [2025-09-23 20:50:31.625] stop dss Done [2025-09-23 20:50:31.674] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:50:31.712] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:50:31.712] /dev/mem opened. [2025-09-23 20:50:31.712] Memory mapped at address 0xffffbaffb000. [2025-09-23 20:50:31.712] Read at address 0x00600018 (0xffffbaffb018): 0x00000000 [2025-09-23 20:50:31.712] Write at address 0x00600018 (0xffffbaffb018): 0x00400040, readback 0x00400040 [2025-09-23 20:50:31.856] Loaded PowerVR consumer services. [2025-09-23 20:50:31.966] Waiting data available... [2025-09-23 20:50:31.966] 512+0 records in [2025-09-23 20:50:31.966] 512+0 records out [2025-09-23 20:50:31.998] Starting syslogd/klogd: done [2025-09-23 20:50:32.014] DML Start [2025-09-23 20:50:32.174] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:50:32.398] DML res1: 0 [2025-09-23 20:50:32.874] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:50:32.874] Read Success [2025-09-23 20:50:32.874] Verifying certificate... [2025-09-23 20:50:33.114] Verified OK [2025-09-23 20:50:33.130] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:50:34.712] Verified OK [2025-09-23 20:50:34.728] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:50:35.310] Verified OK [2025-09-23 20:50:35.310] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:50:38.044] fs.protected_hardlinks = 1 [2025-09-23 20:50:38.072] fs.protected_symlinks = 1 [2025-09-23 20:50:38.072] kernel.modules_disabled = 1 [2025-09-23 20:50:38.280] [2025-09-23 20:50:38.280] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:50:39.523] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:50:47.257] SBL1:1210.0.1.0 [2025-09-23 20:50:47.289] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:50:48.872] SBL2:1210.0.1.0 [2025-09-23 20:50:48.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:50:49.015] j-A [2025-09-23 20:50:56.355] The R5 Autosar Classic is running [2025-09-23 20:50:56.386] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:50:56.386] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:50:56.994] INIT: version 2.96 booting [2025-09-23 20:50:57.107] INIT: Entering runlevel: 5 [2025-09-23 20:50:57.267] mtd24 attached [2025-09-23 20:50:57.267] mtd32 attached [2025-09-23 20:50:57.283] mtd28 attached [2025-09-23 20:50:57.331] ubi0:textures is mounted. [2025-09-23 20:50:57.331] RTNETLINK answers: File exists [2025-09-23 20:50:57.388] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:50:57.388] ubi1:dml_code is mounted. [2025-09-23 20:50:57.388] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:50:57.388] ubi2:animations is mounted. [2025-09-23 20:50:57.388] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:50:57.388] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:50:57.388] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:50:57.388] data.LB_FadeInType0=100 [2025-09-23 20:50:57.388] data.CHLH_FadeInType0=0 [2025-09-23 20:50:57.388] data.WU_FadeInDelay=0 [2025-09-23 20:50:57.388] max_time_out=0 [2025-09-23 20:50:57.388] No splash screen [2025-09-23 20:50:57.388] stop dss Done [2025-09-23 20:50:57.435] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:50:57.435] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:50:57.472] /dev/mem opened. [2025-09-23 20:50:57.472] Memory mapped at address 0xffff933ec000. [2025-09-23 20:50:57.472] Read at address 0x00600018 (0xffff933ec018): 0x00000000 [2025-09-23 20:50:57.472] Write at address 0x00600018 (0xffff933ec018): 0x00400040, readback 0x00400040 [2025-09-23 20:50:57.553] Loaded PowerVR consumer services. [2025-09-23 20:50:57.696] Waiting data available... [2025-09-23 20:50:57.712] 512+0 records in [2025-09-23 20:50:57.712] 512+0 records out [2025-09-23 20:50:57.760] Starting syslogd/klogd: done [2025-09-23 20:50:57.776] DML Start [2025-09-23 20:50:57.936] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:50:58.160] DML res1: 0 [2025-09-23 20:50:58.647] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:50:58.647] Read Success [2025-09-23 20:50:58.647] Verifying certificate... [2025-09-23 20:50:58.872] Verified OK [2025-09-23 20:50:58.888] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:51:00.564] Verified OK [2025-09-23 20:51:00.564] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:51:01.180] Verified OK [2025-09-23 20:51:01.180] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:51:03.801] fs.protected_hardlinks = 1 [2025-09-23 20:51:03.801] fs.protected_symlinks = 1 [2025-09-23 20:51:03.817] kernel.modules_disabled = 1 [2025-09-23 20:51:04.025] [2025-09-23 20:51:04.025] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:51:05.205] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:51:13.030] SBL1:1210.0.1.0 [2025-09-23 20:51:13.062] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:51:14.644] SBL2:1210.0.1.0 [2025-09-23 20:51:14.676] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:51:14.788] j-A [2025-09-23 20:51:22.127] The R5 Autosar Classic is running [2025-09-23 20:51:22.154] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:51:22.154] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:51:22.761] INIT: version 2.96 booting [2025-09-23 20:51:22.873] INIT: Entering runlevel: 5 [2025-09-23 20:51:23.033] mtd24 attached [2025-09-23 20:51:23.049] mtd32 attached [2025-09-23 20:51:23.049] mtd28 attached [2025-09-23 20:51:23.081] ubi0:textures is mounted. [2025-09-23 20:51:23.096] RTNETLINK answers: File exists [2025-09-23 20:51:23.143] ubi2:animations is mounted. [2025-09-23 20:51:23.143] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:51:23.143] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:51:23.143] ubi1:dml_code is mounted. [2025-09-23 20:51:23.143] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:51:23.143] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:51:23.143] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:51:23.166] data.LB_FadeInType0=100 [2025-09-23 20:51:23.166] data.CHLH_FadeInType0=0 [2025-09-23 20:51:23.166] data.WU_FadeInDelay=0 [2025-09-23 20:51:23.166] max_time_out=0 [2025-09-23 20:51:23.166] No splash screen [2025-09-23 20:51:23.166] stop dss Done [2025-09-23 20:51:23.255] /dev/mem opened. [2025-09-23 20:51:23.255] Memory mapped at address 0xffffbbc51000. [2025-09-23 20:51:23.255] Read at address 0x00600018 (0xffffbbc51018): 0x00000000 [2025-09-23 20:51:23.255] Write at address 0x00600018 (0xffffbbc51018): 0x00400040, readback 0x00400040 [2025-09-23 20:51:23.255] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:51:23.255] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:51:23.480] Loaded PowerVR consumer services. [2025-09-23 20:51:23.542] Waiting data available... [2025-09-23 20:51:23.542] 512+0 records in [2025-09-23 20:51:23.542] 512+0 records out [2025-09-23 20:51:23.558] Starting syslogd/klogd: done [2025-09-23 20:51:23.574] DML Start [2025-09-23 20:51:23.750] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:51:23.926] DML res1: 0 [2025-09-23 20:51:24.461] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:51:24.461] Read Success [2025-09-23 20:51:24.461] Verifying certificate... [2025-09-23 20:51:24.749] Verified OK [2025-09-23 20:51:24.765] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:51:26.518] Verified OK [2025-09-23 20:51:26.518] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:51:26.993] Verified OK [2025-09-23 20:51:26.993] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:51:29.504] fs.protected_hardlinks = 1 [2025-09-23 20:51:29.504] fs.protected_symlinks = 1 [2025-09-23 20:51:29.519] kernel.modules_disabled = 1 [2025-09-23 20:51:29.711] [2025-09-23 20:51:29.711] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:51:31.053] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:51:38.774] SBL1:1210.0.1.0 [2025-09-23 20:51:38.806] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:51:40.389] SBL2:1210.0.1.0 [2025-09-23 20:51:40.420] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:51:40.533] j-A [2025-09-23 20:51:47.873] The R5 Autosar Classic is running [2025-09-23 20:51:47.904] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:51:47.904] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:51:48.511] INIT: version 2.96 booting [2025-09-23 20:51:48.624] INIT: Entering runlevel: 5 [2025-09-23 20:51:48.768] mtd28 attached [2025-09-23 20:51:48.784] mtd32 attached [2025-09-23 20:51:48.800] mtd24 attached [2025-09-23 20:51:48.848] RTNETLINK answers: File exists [2025-09-23 20:51:48.848] ubi0:animations is mounted. [2025-09-23 20:51:48.881] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:51:48.881] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:51:48.881] ubi2:textures is mounted. [2025-09-23 20:51:48.881] ubi1:dml_code is mounted. [2025-09-23 20:51:48.881] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:51:48.881] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:51:48.881] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:51:48.907] data.LB_FadeInType0=100 [2025-09-23 20:51:48.907] data.CHLH_FadeInType0=0 [2025-09-23 20:51:48.907] data.WU_FadeInDelay=0 [2025-09-23 20:51:48.907] max_time_out=0 [2025-09-23 20:51:48.907] No splash screen [2025-09-23 20:51:48.907] stop dss Done [2025-09-23 20:51:48.968] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:51:48.968] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:51:48.968] /dev/mem opened. [2025-09-23 20:51:48.968] Memory mapped at address 0xffff92d60000. [2025-09-23 20:51:48.968] Read at address 0x00600018 (0xffff92d60018): 0x00000000 [2025-09-23 20:51:48.968] Write at address 0x00600018 (0xffff92d60018): 0x00400040, readback 0x00400040 [2025-09-23 20:51:49.160] Loaded PowerVR consumer services. [2025-09-23 20:51:49.241] Waiting data available... [2025-09-23 20:51:49.257] 512+0 records in [2025-09-23 20:51:49.257] 512+0 records out [2025-09-23 20:51:49.289] Starting syslogd/klogd: done [2025-09-23 20:51:49.305] DML Start [2025-09-23 20:51:49.496] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:51:49.721] DML res1: 0 [2025-09-23 20:51:50.128] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:51:50.128] Read Success [2025-09-23 20:51:50.128] Verifying certificate... [2025-09-23 20:51:50.400] Verified OK [2025-09-23 20:51:50.400] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:51:51.983] Verified OK [2025-09-23 20:51:51.983] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:51:52.655] Verified OK [2025-09-23 20:51:52.671] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:51:55.308] fs.protected_hardlinks = 1 [2025-09-23 20:51:55.324] fs.protected_symlinks = 1 [2025-09-23 20:51:55.324] kernel.modules_disabled = 1 [2025-09-23 20:51:55.517] [2025-09-23 20:51:55.517] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:51:56.780] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:52:04.512] SBL1:1210.0.1.0 [2025-09-23 20:52:04.544] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:52:06.127] SBL2:1210.0.1.0 [2025-09-23 20:52:06.160] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:52:06.271] j-A [2025-09-23 20:52:13.611] The R5 Autosar Classic is running [2025-09-23 20:52:13.641] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:52:13.641] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:52:14.249] INIT: version 2.96 booting [2025-09-23 20:52:14.361] INIT: Entering runlevel: 5 [2025-09-23 20:52:14.521] mtd32 attached [2025-09-23 20:52:14.521] mtd28 attached [2025-09-23 20:52:14.537] mtd24 attached [2025-09-23 20:52:14.569] ubi0:dml_code is mounted. [2025-09-23 20:52:14.569] RTNETLINK answers: File exists [2025-09-23 20:52:14.642] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:52:14.642] ubi1:animations is mounted. [2025-09-23 20:52:14.642] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:52:14.642] ubi2:textures is mounted. [2025-09-23 20:52:14.642] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:52:14.642] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:52:14.642] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:52:14.642] data.LB_FadeInType0=100 [2025-09-23 20:52:14.642] data.CHLH_FadeInType0=0 [2025-09-23 20:52:14.642] data.WU_FadeInDelay=0 [2025-09-23 20:52:14.642] max_time_out=0 [2025-09-23 20:52:14.642] No splash screen [2025-09-23 20:52:14.642] stop dss Done [2025-09-23 20:52:14.674] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:52:14.674] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:52:14.716] /dev/mem opened. [2025-09-23 20:52:14.716] Memory mapped at address 0xffff808cb000. [2025-09-23 20:52:14.716] Read at address 0x00600018 (0xffff808cb018): 0x00000000 [2025-09-23 20:52:14.716] Write at address 0x00600018 (0xffff808cb018): 0x00400040, readback 0x00400040 [2025-09-23 20:52:14.780] Loaded PowerVR consumer services. [2025-09-23 20:52:14.956] Waiting data available... [2025-09-23 20:52:14.972] 512+0 records in [2025-09-23 20:52:14.972] 512+0 records out [2025-09-23 20:52:15.004] Starting syslogd/klogd: done [2025-09-23 20:52:15.036] DML Start [2025-09-23 20:52:15.212] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:52:15.452] DML res1: 0 [2025-09-23 20:52:15.865] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:52:15.865] Read Success [2025-09-23 20:52:15.865] Verifying certificate... [2025-09-23 20:52:16.121] Verified OK [2025-09-23 20:52:16.137] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:52:17.715] Verified OK [2025-09-23 20:52:17.715] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:52:18.354] Verified OK [2025-09-23 20:52:18.354] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:52:21.040] fs.protected_hardlinks = 1 [2025-09-23 20:52:21.040] fs.protected_symlinks = 1 [2025-09-23 20:52:21.056] kernel.modules_disabled = 1 [2025-09-23 20:52:21.232] [2025-09-23 20:52:21.232] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:52:22.544] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:52:30.252] SBL1:1210.0.1.0 [2025-09-23 20:52:30.284] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:52:31.867] SBL2:1210.0.1.0 [2025-09-23 20:52:31.899] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:52:32.011] j-A [2025-09-23 20:52:39.350] The R5 Autosar Classic is running [2025-09-23 20:52:39.381] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:52:39.381] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:52:39.989] INIT: version 2.96 booting [2025-09-23 20:52:40.101] INIT: Entering runlevel: 5 [2025-09-23 20:52:40.261] mtd24 attached [2025-09-23 20:52:40.261] mtd28 attached [2025-09-23 20:52:40.277] mtd32 attached [2025-09-23 20:52:40.309] ubi0:textures is mounted. [2025-09-23 20:52:40.361] RTNETLINK answers: File exists [2025-09-23 20:52:40.361] ubi2:dml_code is mounted. [2025-09-23 20:52:40.361] ubi1:animations is mounted. [2025-09-23 20:52:40.361] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:52:40.361] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:52:40.361] data.LB_FadeInType0=100 [2025-09-23 20:52:40.400] data.CHLH_FadeInType0=0 [2025-09-23 20:52:40.400] data.WU_FadeInDelay=0 [2025-09-23 20:52:40.400] max_time_out=0 [2025-09-23 20:52:40.400] No splash screen [2025-09-23 20:52:40.400] stop dss Done [2025-09-23 20:52:40.400] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:52:40.400] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:52:40.400] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:52:40.451] /dev/mem opened. [2025-09-23 20:52:40.451] Memory mapped at address 0xffff9bb54000. [2025-09-23 20:52:40.451] Read at address 0x00600018 (0xffff9bb54018): 0x00000000 [2025-09-23 20:52:40.451] Write at address 0x00600018 (0xffff9bb54018): 0x00400040, readback 0x00400040 [2025-09-23 20:52:40.483] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:52:40.505] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:52:40.585] Loaded PowerVR consumer services. [2025-09-23 20:52:40.713] Waiting data available... [2025-09-23 20:52:40.729] 512+0 records in [2025-09-23 20:52:40.729] 512+0 records out [2025-09-23 20:52:40.777] Starting syslogd/klogd: done [2025-09-23 20:52:40.793] DML Start [2025-09-23 20:52:40.969] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:52:41.193] DML res1: 0 [2025-09-23 20:52:41.621] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:52:41.621] Read Success [2025-09-23 20:52:41.621] Verifying certificate... [2025-09-23 20:52:41.877] Verified OK [2025-09-23 20:52:41.893] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:52:43.570] Verified OK [2025-09-23 20:52:43.570] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:52:44.098] Verified OK [2025-09-23 20:52:44.114] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:52:46.592] fs.protected_hardlinks = 1 [2025-09-23 20:52:46.592] fs.protected_symlinks = 1 [2025-09-23 20:52:46.608] kernel.modules_disabled = 1 [2025-09-23 20:52:46.801] [2025-09-23 20:52:46.801] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:52:48.302] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:52:55.982] SBL1:1210.0.1.0 [2025-09-23 20:52:56.030] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:52:57.597] SBL2:1210.0.1.0 [2025-09-23 20:52:57.645] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:52:57.756] j-A [2025-09-23 20:53:05.095] The R5 Autosar Classic is running [2025-09-23 20:53:05.126] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:53:05.126] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:53:05.733] INIT: version 2.96 booting [2025-09-23 20:53:05.846] INIT: Entering runlevel: 5 [2025-09-23 20:53:06.005] mtd24 attached [2025-09-23 20:53:06.005] mtd32 attached [2025-09-23 20:53:06.021] mtd28 attached [2025-09-23 20:53:06.069] RTNETLINK answers: File exists [2025-09-23 20:53:06.114] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:53:06.114] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:53:06.114] ubi0:textures is mounted. [2025-09-23 20:53:06.114] ubi2:animations is mounted. [2025-09-23 20:53:06.114] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:53:06.114] ubi1:dml_code is mounted. [2025-09-23 20:53:06.114] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:53:06.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:53:06.114] data.LB_FadeInType0=100 [2025-09-23 20:53:06.114] data.CHLH_FadeInType0=0 [2025-09-23 20:53:06.135] data.WU_FadeInDelay=0 [2025-09-23 20:53:06.135] max_time_out=0 [2025-09-23 20:53:06.135] No splash screen [2025-09-23 20:53:06.135] stop dss Done [2025-09-23 20:53:06.197] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:53:06.198] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:53:06.198] /dev/mem opened. [2025-09-23 20:53:06.198] Memory mapped at address 0xffff9b077000. [2025-09-23 20:53:06.198] Read at address 0x00600018 (0xffff9b077018): 0x00000000 [2025-09-23 20:53:06.198] Write at address 0x00600018 (0xffff9b077018): 0x00400040, readback 0x00400040 [2025-09-23 20:53:06.293] Loaded PowerVR consumer services. [2025-09-23 20:53:06.469] Waiting data available... [2025-09-23 20:53:06.469] 512+0 records in [2025-09-23 20:53:06.469] 512+0 records out [2025-09-23 20:53:06.501] Starting syslogd/klogd: done [2025-09-23 20:53:06.516] DML Start [2025-09-23 20:53:06.676] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:53:06.916] DML res1: 0 [2025-09-23 20:53:07.364] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:53:07.385] Read Success [2025-09-23 20:53:07.385] Verifying certificate... [2025-09-23 20:53:07.625] Verified OK [2025-09-23 20:53:07.657] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:53:09.304] Verified OK [2025-09-23 20:53:09.304] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:53:09.972] Verified OK [2025-09-23 20:53:09.972] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:53:12.480] fs.protected_hardlinks = 1 [2025-09-23 20:53:12.480] fs.protected_symlinks = 1 [2025-09-23 20:53:12.480] kernel.modules_disabled = 1 [2025-09-23 20:53:12.655] [2025-09-23 20:53:12.655] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:53:13.947] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:53:21.769] SBL1:1210.0.1.0 [2025-09-23 20:53:21.817] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:53:23.384] SBL2:1210.0.1.0 [2025-09-23 20:53:23.431] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:53:23.527] j-A [2025-09-23 20:53:30.881] The R5 Autosar Classic is running [2025-09-23 20:53:30.906] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:53:30.906] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:53:31.514] INIT: version 2.96 booting [2025-09-23 20:53:31.626] INIT: Entering runlevel: 5 [2025-09-23 20:53:31.786] mtd24 attached [2025-09-23 20:53:31.786] mtd32 attached [2025-09-23 20:53:31.802] mtd28 attached [2025-09-23 20:53:31.850] ubi0:textures is mounted. [2025-09-23 20:53:31.850] RTNETLINK answers: File exists [2025-09-23 20:53:31.892] ubi1:dml_code is mounted. [2025-09-23 20:53:31.892] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:53:31.892] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:53:31.892] ubi2:animations is mounted. [2025-09-23 20:53:31.892] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:53:31.892] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:53:31.892] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:53:31.917] data.LB_FadeInType0=100 [2025-09-23 20:53:31.917] data.CHLH_FadeInType0=0 [2025-09-23 20:53:31.917] data.WU_FadeInDelay=0 [2025-09-23 20:53:31.917] max_time_out=0 [2025-09-23 20:53:31.917] No splash screen [2025-09-23 20:53:31.917] stop dss Done [2025-09-23 20:53:31.994] /dev/mem opened. [2025-09-23 20:53:31.994] Memory mapped at address 0xffffa820d000. [2025-09-23 20:53:31.994] Read at address 0x00600018 (0xffffa820d018): 0x00000000 [2025-09-23 20:53:31.994] Write at address 0x00600018 (0xffffa820d018): 0x00400040, readback 0x00400040 [2025-09-23 20:53:31.994] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:53:31.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:53:32.202] Loaded PowerVR consumer services. [2025-09-23 20:53:32.234] 512+0 records in [2025-09-23 20:53:32.250] 512+0 records out [2025-09-23 20:53:32.282] Waiting data available... [2025-09-23 20:53:32.282] Starting syslogd/klogd: done [2025-09-23 20:53:32.298] DML Start [2025-09-23 20:53:32.490] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:53:32.729] DML res1: 0 [2025-09-23 20:53:33.150] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:53:33.150] Read Success [2025-09-23 20:53:33.150] Verifying certificate... [2025-09-23 20:53:33.390] Verified OK [2025-09-23 20:53:33.422] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:53:35.059] Verified OK [2025-09-23 20:53:35.059] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:53:35.640] Verified OK [2025-09-23 20:53:35.640] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:53:38.294] fs.protected_hardlinks = 1 [2025-09-23 20:53:38.310] fs.protected_symlinks = 1 [2025-09-23 20:53:38.310] kernel.modules_disabled = 1 [2025-09-23 20:53:38.519] [2025-09-23 20:53:38.519] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:53:39.807] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:53:47.530] SBL1:1210.0.1.0 [2025-09-23 20:53:47.562] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:53:49.145] SBL2:1210.0.1.0 [2025-09-23 20:53:49.177] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:53:49.289] j-A [2025-09-23 20:53:56.663] The R5 Autosar Classic is running [2025-09-23 20:53:56.663] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:53:56.663] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:53:57.270] INIT: version 2.96 booting [2025-09-23 20:53:57.382] INIT: Entering runlevel: 5 [2025-09-23 20:53:57.526] mtd24 attached [2025-09-23 20:53:57.542] mtd28 attached [2025-09-23 20:53:57.558] mtd32 attached [2025-09-23 20:53:57.616] ubi1:animations is mounted. [2025-09-23 20:53:57.616] ubi0:textures is mounted. [2025-09-23 20:53:57.616] RTNETLINK answers: File exists [2025-09-23 20:53:57.616] ubi2:dml_code is mounted. [2025-09-23 20:53:57.639] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:53:57.639] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:53:57.639] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:53:57.639] data.LB_FadeInType0=100 [2025-09-23 20:53:57.670] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:53:57.670] data.CHLH_FadeInType0=0 [2025-09-23 20:53:57.670] data.WU_FadeInDelay=0 [2025-09-23 20:53:57.670] max_time_out=0 [2025-09-23 20:53:57.670] No splash screen [2025-09-23 20:53:57.670] stop dss Done [2025-09-23 20:53:57.670] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:53:57.730] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:53:57.730] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:53:57.730] /dev/mem opened. [2025-09-23 20:53:57.730] Memory mapped at address 0xffff9961e000. [2025-09-23 20:53:57.730] Read at address 0x00600018 (0xffff9961e018): 0x00000000 [2025-09-23 20:53:57.730] Write at address 0x00600018 (0xffff9961e018): 0x00400040, readback 0x00400040 [2025-09-23 20:53:57.906] Loaded PowerVR consumer services. [2025-09-23 20:53:58.001] Waiting data available... [2025-09-23 20:53:58.017] 512+0 records in [2025-09-23 20:53:58.017] 512+0 records out [2025-09-23 20:53:58.065] Starting syslogd/klogd: done [2025-09-23 20:53:58.082] DML Start [2025-09-23 20:53:58.226] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:53:58.433] DML res1: 0 [2025-09-23 20:53:58.925] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:53:58.925] Read Success [2025-09-23 20:53:58.925] Verifying certificate... [2025-09-23 20:53:59.181] Verified OK [2025-09-23 20:53:59.197] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:54:00.891] Verified OK [2025-09-23 20:54:00.891] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:54:01.480] Verified OK [2025-09-23 20:54:01.480] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:54:04.006] fs.protected_hardlinks = 1 [2025-09-23 20:54:04.034] fs.protected_symlinks = 1 [2025-09-23 20:54:04.034] kernel.modules_disabled = 1 [2025-09-23 20:54:04.210] [2025-09-23 20:54:04.210] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:54:05.598] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:54:13.270] SBL1:1210.0.1.0 [2025-09-23 20:54:13.318] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:54:14.885] SBL2:1210.0.1.0 [2025-09-23 20:54:14.932] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:54:15.029] j-A [2025-09-23 20:54:22.384] The R5 Autosar Classic is running [2025-09-23 20:54:22.407] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:54:22.407] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:54:23.014] INIT: version 2.96 booting [2025-09-23 20:54:23.126] INIT: Entering runlevel: 5 [2025-09-23 20:54:23.286] mtd32 attached [2025-09-23 20:54:23.302] mtd24 attached [2025-09-23 20:54:23.302] mtd28 attached [2025-09-23 20:54:23.350] ubi0:dml_code is mounted. [2025-09-23 20:54:23.350] RTNETLINK answers: File exists [2025-09-23 20:54:23.402] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:54:23.402] ubi1:textures is mounted. [2025-09-23 20:54:23.402] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:54:23.402] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:54:23.402] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:54:23.402] ubi2:animations is mounted. [2025-09-23 20:54:23.402] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:54:23.427] data.LB_FadeInType0=100 [2025-09-23 20:54:23.427] data.CHLH_FadeInType0=0 [2025-09-23 20:54:23.427] data.WU_FadeInDelay=0 [2025-09-23 20:54:23.427] max_time_out=0 [2025-09-23 20:54:23.427] No splash screen [2025-09-23 20:54:23.427] stop dss Done [2025-09-23 20:54:23.459] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:54:23.475] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:54:23.512] /dev/mem opened. [2025-09-23 20:54:23.512] Memory mapped at address 0xffffb9d99000. [2025-09-23 20:54:23.512] Read at address 0x00600018 (0xffffb9d99018): 0x00000000 [2025-09-23 20:54:23.512] Write at address 0x00600018 (0xffffb9d99018): 0x00400040, readback 0x00400040 [2025-09-23 20:54:23.640] Loaded PowerVR consumer services. [2025-09-23 20:54:23.780] Waiting data available... [2025-09-23 20:54:23.780] 512+0 records in [2025-09-23 20:54:23.780] 512+0 records out [2025-09-23 20:54:23.828] Starting syslogd/klogd: done [2025-09-23 20:54:23.844] DML Start [2025-09-23 20:54:24.004] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:54:24.245] DML res1: 0 [2025-09-23 20:54:24.692] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:54:24.708] Read Success [2025-09-23 20:54:24.708] Verifying certificate... [2025-09-23 20:54:24.964] Verified OK [2025-09-23 20:54:24.980] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:54:26.802] Verified OK [2025-09-23 20:54:26.818] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:54:27.377] Verified OK [2025-09-23 20:54:27.377] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:54:30.000] fs.protected_hardlinks = 1 [2025-09-23 20:54:30.000] fs.protected_symlinks = 1 [2025-09-23 20:54:30.015] kernel.modules_disabled = 1 [2025-09-23 20:54:30.207] [2025-09-23 20:54:30.207] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:54:31.303] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:54:39.019] SBL1:1210.0.1.0 [2025-09-23 20:54:39.067] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:54:40.634] SBL2:1210.0.1.0 [2025-09-23 20:54:40.682] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:54:40.778] j-A [2025-09-23 20:54:48.134] The R5 Autosar Classic is running [2025-09-23 20:54:48.156] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:54:48.156] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:54:48.764] INIT: version 2.96 booting [2025-09-23 20:54:48.876] INIT: Entering runlevel: 5 [2025-09-23 20:54:49.035] mtd24 attached [2025-09-23 20:54:49.035] mtd28 attached [2025-09-23 20:54:49.051] mtd32 attached [2025-09-23 20:54:49.112] ubi1:animations is mounted. [2025-09-23 20:54:49.112] ubi0:textures is mounted. [2025-09-23 20:54:49.112] RTNETLINK answers: File exists [2025-09-23 20:54:49.112] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:54:49.162] ubi2:dml_code is mounted. [2025-09-23 20:54:49.162] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:54:49.162] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:54:49.162] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:54:49.162] data.LB_FadeInType0=100 [2025-09-23 20:54:49.162] data.CHLH_FadeInType0=0 [2025-09-23 20:54:49.162] data.WU_FadeInDelay=0 [2025-09-23 20:54:49.162] max_time_out=0 [2025-09-23 20:54:49.162] No splash screen [2025-09-23 20:54:49.162] stop dss Done [2025-09-23 20:54:49.162] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:54:49.239] /dev/mem opened. [2025-09-23 20:54:49.239] Memory mapped at address 0xffff823bd000. [2025-09-23 20:54:49.239] Read at address 0x00600018 (0xffff823bd018): 0x00000000 [2025-09-23 20:54:49.239] Write at address 0x00600018 (0xffff823bd018): 0x00400040, readback 0x00400040 [2025-09-23 20:54:49.239] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:54:49.239] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:54:49.382] Loaded PowerVR consumer services. [2025-09-23 20:54:49.494] Waiting data available... [2025-09-23 20:54:49.510] 512+0 records in [2025-09-23 20:54:49.510] 512+0 records out [2025-09-23 20:54:49.526] Starting syslogd/klogd: done [2025-09-23 20:54:49.558] DML Start [2025-09-23 20:54:49.750] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:54:49.973] DML res1: 0 [2025-09-23 20:54:50.357] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:54:50.378] Read Success [2025-09-23 20:54:50.378] Verifying certificate... [2025-09-23 20:54:50.587] Verified OK [2025-09-23 20:54:50.603] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:54:52.382] Verified OK [2025-09-23 20:54:52.382] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:54:52.926] Verified OK [2025-09-23 20:54:52.942] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:54:55.452] fs.protected_hardlinks = 1 [2025-09-23 20:54:55.468] fs.protected_symlinks = 1 [2025-09-23 20:54:55.468] kernel.modules_disabled = 1 [2025-09-23 20:54:55.644] [2025-09-23 20:54:55.644] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:54:57.057] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:55:04.773] SBL1:1210.0.1.0 [2025-09-23 20:55:04.821] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:55:06.404] SBL2:1210.0.1.0 [2025-09-23 20:55:06.437] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:55:06.548] j-A [2025-09-23 20:55:13.888] The R5 Autosar Classic is running [2025-09-23 20:55:13.913] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:55:13.913] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:55:14.521] INIT: version 2.96 booting [2025-09-23 20:55:14.632] INIT: Entering runlevel: 5 [2025-09-23 20:55:14.792] mtd24 attached [2025-09-23 20:55:14.792] mtd28 attached [2025-09-23 20:55:14.808] mtd32 attached [2025-09-23 20:55:14.857] RTNETLINK answers: File exists [2025-09-23 20:55:14.857] ubi0:textures is mounted. [2025-09-23 20:55:14.907] ubi1:animations is mounted. [2025-09-23 20:55:14.907] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:55:14.907] ubi2:dml_code is mounted. [2025-09-23 20:55:14.907] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:55:14.907] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:55:14.907] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:55:14.907] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:55:14.907] data.LB_FadeInType0=100 [2025-09-23 20:55:14.907] data.CHLH_FadeInType0=0 [2025-09-23 20:55:14.907] data.WU_FadeInDelay=0 [2025-09-23 20:55:14.907] max_time_out=0 [2025-09-23 20:55:14.907] No splash screen [2025-09-23 20:55:14.907] stop dss Done [2025-09-23 20:55:14.993] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:55:14.993] /dev/mem opened. [2025-09-23 20:55:14.993] Memory mapped at address 0xffff95a07000. [2025-09-23 20:55:14.993] Read at address 0x00600018 (0xffff95a07018): 0x00000000 [2025-09-23 20:55:14.993] Write at address 0x00600018 (0xffff95a07018): 0x00400040, readback 0x00400040 [2025-09-23 20:55:14.993] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:55:15.121] Loaded PowerVR consumer services. [2025-09-23 20:55:15.249] Waiting data available... [2025-09-23 20:55:15.264] 512+0 records in [2025-09-23 20:55:15.264] 512+0 records out [2025-09-23 20:55:15.297] Starting syslogd/klogd: done [2025-09-23 20:55:15.329] DML Start [2025-09-23 20:55:15.504] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:55:15.680] DML res1: 0 [2025-09-23 20:55:16.174] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:55:16.174] Read Success [2025-09-23 20:55:16.174] Verifying certificate... [2025-09-23 20:55:16.429] Verified OK [2025-09-23 20:55:16.445] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:55:18.123] Verified OK [2025-09-23 20:55:18.123] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:55:18.757] Verified OK [2025-09-23 20:55:18.757] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:55:21.331] fs.protected_hardlinks = 1 [2025-09-23 20:55:21.346] fs.protected_symlinks = 1 [2025-09-23 20:55:21.346] kernel.modules_disabled = 1 [2025-09-23 20:55:21.554] [2025-09-23 20:55:21.554] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:55:22.767] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:55:30.577] SBL1:1210.0.1.0 [2025-09-23 20:55:30.625] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:55:32.191] SBL2:1210.0.1.0 [2025-09-23 20:55:32.240] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:55:32.336] j-A [2025-09-23 20:55:39.692] The R5 Autosar Classic is running [2025-09-23 20:55:39.692] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:55:39.713] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:55:40.321] INIT: version 2.96 booting [2025-09-23 20:55:40.432] INIT: Entering runlevel: 5 [2025-09-23 20:55:40.576] mtd24 attached [2025-09-23 20:55:40.592] mtd28 attached [2025-09-23 20:55:40.608] mtd32 attached [2025-09-23 20:55:40.640] ubi0:textures is mounted. [2025-09-23 20:55:40.656] RTNETLINK answers: File exists [2025-09-23 20:55:40.712] ubi1:animations is mounted. [2025-09-23 20:55:40.712] ubi2:dml_code is mounted. [2025-09-23 20:55:40.712] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:55:40.712] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:55:40.712] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:55:40.712] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:55:40.712] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:55:40.712] data.LB_FadeInType0=100 [2025-09-23 20:55:40.712] data.CHLH_FadeInType0=0 [2025-09-23 20:55:40.712] data.WU_FadeInDelay=0 [2025-09-23 20:55:40.712] max_time_out=0 [2025-09-23 20:55:40.712] No splash screen [2025-09-23 20:55:40.712] stop dss Done [2025-09-23 20:55:40.784] /dev/mem opened. [2025-09-23 20:55:40.784] Memory mapped at address 0xffffa7473000. [2025-09-23 20:55:40.784] Read at address 0x00600018 (0xffffa7473018): 0x00000000 [2025-09-23 20:55:40.784] Write at address 0x00600018 (0xffffa7473018): 0x00400040, readback 0x00400040 [2025-09-23 20:55:40.784] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:55:40.800] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:55:40.880] Loaded PowerVR consumer services. [2025-09-23 20:55:41.055] Waiting data available... [2025-09-23 20:55:41.055] 512+0 records in [2025-09-23 20:55:41.055] 512+0 records out [2025-09-23 20:55:41.087] Starting syslogd/klogd: done [2025-09-23 20:55:41.103] DML Start [2025-09-23 20:55:41.327] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:55:41.551] DML res1: 0 [2025-09-23 20:55:41.958] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:55:41.958] Read Success [2025-09-23 20:55:41.958] Verifying certificate... [2025-09-23 20:55:42.182] Verified OK [2025-09-23 20:55:42.198] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:55:43.908] Verified OK [2025-09-23 20:55:43.924] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:55:44.436] Verified OK [2025-09-23 20:55:44.452] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:55:46.962] fs.protected_hardlinks = 1 [2025-09-23 20:55:46.962] fs.protected_symlinks = 1 [2025-09-23 20:55:46.977] kernel.modules_disabled = 1 [2025-09-23 20:55:47.186] [2025-09-23 20:55:47.186] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:55:48.607] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:55:56.332] SBL1:1210.0.1.0 [2025-09-23 20:55:56.364] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:55:57.947] SBL2:1210.0.1.0 [2025-09-23 20:55:57.979] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:55:58.091] j-A [2025-09-23 20:56:05.463] The R5 Autosar Classic is running [2025-09-23 20:56:05.463] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:56:05.463] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:56:06.071] INIT: version 2.96 booting [2025-09-23 20:56:06.183] INIT: Entering runlevel: 5 [2025-09-23 20:56:06.342] mtd28 attached [2025-09-23 20:56:06.342] mtd32 attached [2025-09-23 20:56:06.358] mtd24 attached [2025-09-23 20:56:06.406] ubi0:animations is mounted. [2025-09-23 20:56:06.406] RTNETLINK answers: File exists [2025-09-23 20:56:06.466] ubi2:textures is mounted. [2025-09-23 20:56:06.466] ubi1:dml_code is mounted. [2025-09-23 20:56:06.466] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:56:06.466] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:56:06.466] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:56:06.466] data.LB_FadeInType0=100 [2025-09-23 20:56:06.466] data.CHLH_FadeInType0=0 [2025-09-23 20:56:06.466] data.WU_FadeInDelay=0 [2025-09-23 20:56:06.466] max_time_out=0 [2025-09-23 20:56:06.466] No splash screen [2025-09-23 20:56:06.466] stop dss Done [2025-09-23 20:56:06.466] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:56:06.466] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:56:06.498] /dev/mem opened. [2025-09-23 20:56:06.498] Memory mapped at address 0xffffa6491000. [2025-09-23 20:56:06.524] Read at address 0x00600018 (0xffffa6491018): 0x00000000 [2025-09-23 20:56:06.524] Write at address 0x00600018 (0xffffa6491018): 0x00400040, readback 0x00400040 [2025-09-23 20:56:06.540] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:56:06.556] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:56:06.668] Loaded PowerVR consumer services. [2025-09-23 20:56:06.795] Waiting data available... [2025-09-23 20:56:06.811] 512+0 records in [2025-09-23 20:56:06.811] 512+0 records out [2025-09-23 20:56:06.827] Starting syslogd/klogd: done [2025-09-23 20:56:06.860] DML Start [2025-09-23 20:56:07.019] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:56:07.275] DML res1: 0 [2025-09-23 20:56:07.719] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:56:07.719] Read Success [2025-09-23 20:56:07.719] Verifying certificate... [2025-09-23 20:56:07.959] Verified OK [2025-09-23 20:56:07.975] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:56:09.758] Verified OK [2025-09-23 20:56:09.758] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:56:10.331] Verified OK [2025-09-23 20:56:10.331] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:56:12.826] fs.protected_hardlinks = 1 [2025-09-23 20:56:12.842] fs.protected_symlinks = 1 [2025-09-23 20:56:12.842] kernel.modules_disabled = 1 [2025-09-23 20:56:13.051] [2025-09-23 20:56:13.051] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:56:14.334] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:56:22.083] SBL1:1210.0.1.0 [2025-09-23 20:56:22.131] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:56:23.697] SBL2:1210.0.1.0 [2025-09-23 20:56:23.745] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:56:23.857] j-A [2025-09-23 20:56:31.197] The R5 Autosar Classic is running [2025-09-23 20:56:31.222] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:56:31.222] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:56:31.830] INIT: version 2.96 booting [2025-09-23 20:56:31.941] INIT: Entering runlevel: 5 [2025-09-23 20:56:32.101] mtd24 attached [2025-09-23 20:56:32.117] mtd32 attached [2025-09-23 20:56:32.117] mtd28 attached [2025-09-23 20:56:32.149] ubi0:textures is mounted. [2025-09-23 20:56:32.181] RTNETLINK answers: File exists [2025-09-23 20:56:32.181] ubi1:dml_code is mounted. [2025-09-23 20:56:32.235] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:56:32.235] ubi2:animations is mounted. [2025-09-23 20:56:32.235] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:56:32.235] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:56:32.235] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:56:32.235] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:56:32.235] data.LB_FadeInType0=100 [2025-09-23 20:56:32.235] data.CHLH_FadeInType0=0 [2025-09-23 20:56:32.235] data.WU_FadeInDelay=0 [2025-09-23 20:56:32.235] max_time_out=0 [2025-09-23 20:56:32.235] No splash screen [2025-09-23 20:56:32.235] stop dss Done [2025-09-23 20:56:32.267] /dev/mem opened. [2025-09-23 20:56:32.267] Memory mapped at address 0xffffae8e9000. [2025-09-23 20:56:32.302] Read at address 0x00600018 (0xffffae8e9018): 0x00000000 [2025-09-23 20:56:32.302] Write at address 0x00600018 (0xffffae8e9018): 0x00400040, readback 0x00400040 [2025-09-23 20:56:32.302] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:56:32.302] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:56:32.398] Loaded PowerVR consumer services. [2025-09-23 20:56:32.572] Waiting data available... [2025-09-23 20:56:32.572] 512+0 records in [2025-09-23 20:56:32.572] 512+0 records out [2025-09-23 20:56:32.588] Starting syslogd/klogd: done [2025-09-23 20:56:32.604] DML Start [2025-09-23 20:56:32.796] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:56:33.020] DML res1: 0 [2025-09-23 20:56:33.411] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:56:33.411] Read Success [2025-09-23 20:56:33.411] Verifying certificate... [2025-09-23 20:56:33.667] Verified OK [2025-09-23 20:56:33.682] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:56:35.241] Verified OK [2025-09-23 20:56:35.241] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:56:35.810] Verified OK [2025-09-23 20:56:35.810] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:56:38.545] fs.protected_hardlinks = 1 [2025-09-23 20:56:38.545] fs.protected_symlinks = 1 [2025-09-23 20:56:38.561] kernel.modules_disabled = 1 [2025-09-23 20:56:38.753] [2025-09-23 20:56:38.753] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:56:40.111] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:56:47.829] SBL1:1210.0.1.0 [2025-09-23 20:56:47.877] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:56:49.443] SBL2:1210.0.1.0 [2025-09-23 20:56:49.491] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:56:49.603] j-A [2025-09-23 20:56:56.942] The R5 Autosar Classic is running [2025-09-23 20:56:56.967] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:56:56.967] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:56:57.575] INIT: version 2.96 booting [2025-09-23 20:56:57.687] INIT: Entering runlevel: 5 [2025-09-23 20:56:57.846] mtd28 attached [2025-09-23 20:56:57.846] mtd32 attached [2025-09-23 20:56:57.862] mtd24 attached [2025-09-23 20:56:57.910] ubi0:animations is mounted. [2025-09-23 20:56:57.910] RTNETLINK answers: File exists [2025-09-23 20:56:57.947] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:56:57.947] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:56:57.947] ubi2:textures is mounted. [2025-09-23 20:56:57.947] ubi1:dml_code is mounted. [2025-09-23 20:56:57.947] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:56:57.947] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:56:57.947] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:56:57.972] data.LB_FadeInType0=100 [2025-09-23 20:56:57.972] data.CHLH_FadeInType0=0 [2025-09-23 20:56:57.972] data.WU_FadeInDelay=0 [2025-09-23 20:56:57.972] max_time_out=0 [2025-09-23 20:56:57.972] No splash screen [2025-09-23 20:56:57.972] stop dss Done [2025-09-23 20:56:58.047] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:56:58.047] /dev/mem opened. [2025-09-23 20:56:58.047] Memory mapped at address 0xffffb750f000. [2025-09-23 20:56:58.047] Read at address 0x00600018 (0xffffb750f018): 0x00000000 [2025-09-23 20:56:58.047] Write at address 0x00600018 (0xffffb750f018): 0x00400040, readback 0x00400040 [2025-09-23 20:56:58.047] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:56:58.175] Loaded PowerVR consumer services. [2025-09-23 20:56:58.303] Waiting data available... [2025-09-23 20:56:58.319] 512+0 records in [2025-09-23 20:56:58.319] 512+0 records out [2025-09-23 20:56:58.351] Starting syslogd/klogd: done [2025-09-23 20:56:58.367] DML Start [2025-09-23 20:56:58.543] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:56:58.767] DML res1: 0 [2025-09-23 20:56:59.236] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:56:59.236] Read Success [2025-09-23 20:56:59.236] Verifying certificate... [2025-09-23 20:56:59.476] Verified OK [2025-09-23 20:56:59.492] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:57:01.139] Verified OK [2025-09-23 20:57:01.139] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:57:01.779] Verified OK [2025-09-23 20:57:01.779] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:57:04.465] fs.protected_hardlinks = 1 [2025-09-23 20:57:04.465] fs.protected_symlinks = 1 [2025-09-23 20:57:04.465] kernel.modules_disabled = 1 [2025-09-23 20:57:04.640] [2025-09-23 20:57:04.640] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:57:05.839] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:57:13.602] SBL1:1210.0.1.0 [2025-09-23 20:57:13.650] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:57:15.218] SBL2:1210.0.1.0 [2025-09-23 20:57:15.266] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:57:15.361] j-A [2025-09-23 20:57:22.715] The R5 Autosar Classic is running [2025-09-23 20:57:22.741] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:57:22.741] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:57:23.348] INIT: version 2.96 booting [2025-09-23 20:57:23.460] INIT: Entering runlevel: 5 [2025-09-23 20:57:23.621] mtd24 attached [2025-09-23 20:57:23.621] mtd28 attached [2025-09-23 20:57:23.637] mtd32 attached [2025-09-23 20:57:23.684] ubi0:textures is mounted. [2025-09-23 20:57:23.684] RTNETLINK answers: File exists [2025-09-23 20:57:23.715] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:57:23.715] ubi1:animations is mounted. [2025-09-23 20:57:23.715] ubi2:dml_code is mounted. [2025-09-23 20:57:23.715] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:57:23.715] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:57:23.748] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:57:23.748] data.LB_FadeInType0=100 [2025-09-23 20:57:23.748] data.CHLH_FadeInType0=0 [2025-09-23 20:57:23.748] data.WU_FadeInDelay=0 [2025-09-23 20:57:23.748] max_time_out=0 [2025-09-23 20:57:23.748] No splash screen [2025-09-23 20:57:23.748] stop dss Done [2025-09-23 20:57:23.748] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:57:23.825] /dev/mem opened. [2025-09-23 20:57:23.825] Memory mapped at address 0xffff9d7ad000. [2025-09-23 20:57:23.825] Read at address 0x00600018 (0xffff9d7ad018): 0x00000000 [2025-09-23 20:57:23.825] Write at address 0x00600018 (0xffff9d7ad018): 0x00400040, readback 0x00400040 [2025-09-23 20:57:23.825] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:57:23.825] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:57:23.905] Loaded PowerVR consumer services. [2025-09-23 20:57:24.079] Waiting data available... [2025-09-23 20:57:24.079] 512+0 records in [2025-09-23 20:57:24.079] 512+0 records out [2025-09-23 20:57:24.111] Starting syslogd/klogd: done [2025-09-23 20:57:24.127] DML Start [2025-09-23 20:57:24.335] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:57:24.559] DML res1: 0 [2025-09-23 20:57:24.944] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:57:24.944] Read Success [2025-09-23 20:57:24.960] Verifying certificate... [2025-09-23 20:57:25.215] Verified OK [2025-09-23 20:57:25.247] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:57:26.942] Verified OK [2025-09-23 20:57:26.942] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:57:27.512] Verified OK [2025-09-23 20:57:27.512] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:57:30.006] fs.protected_hardlinks = 1 [2025-09-23 20:57:30.022] fs.protected_symlinks = 1 [2025-09-23 20:57:30.039] kernel.modules_disabled = 1 [2025-09-23 20:57:30.247] [2025-09-23 20:57:30.247] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:57:31.650] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:57:39.375] SBL1:1210.0.1.0 [2025-09-23 20:57:39.407] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:57:40.989] SBL2:1210.0.1.0 [2025-09-23 20:57:41.021] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:57:41.133] j-A [2025-09-23 20:57:48.503] The R5 Autosar Classic is running [2025-09-23 20:57:48.503] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:57:48.503] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:57:49.112] INIT: version 2.96 booting [2025-09-23 20:57:49.222] INIT: Entering runlevel: 5 [2025-09-23 20:57:49.367] mtd28 attached [2025-09-23 20:57:49.383] mtd24 attached [2025-09-23 20:57:49.383] mtd32 attached [2025-09-23 20:57:49.431] RTNETLINK answers: File exists [2025-09-23 20:57:49.479] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:57:49.479] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:57:49.479] ubi0:animations is mounted. [2025-09-23 20:57:49.479] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:57:49.479] ubi1:textures is mounted. [2025-09-23 20:57:49.479] ubi2:dml_code is mounted. [2025-09-23 20:57:49.479] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:57:49.479] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:57:49.504] data.LB_FadeInType0=100 [2025-09-23 20:57:49.504] data.CHLH_FadeInType0=0 [2025-09-23 20:57:49.504] data.WU_FadeInDelay=0 [2025-09-23 20:57:49.504] max_time_out=0 [2025-09-23 20:57:49.504] No splash screen [2025-09-23 20:57:49.504] stop dss Done [2025-09-23 20:57:49.520] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:57:49.536] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:57:49.552] /dev/mem opened. [2025-09-23 20:57:49.584] Memory mapped at address 0xffff9a945000. [2025-09-23 20:57:49.584] Read at address 0x00600018 (0xffff9a945018): 0x00000000 [2025-09-23 20:57:49.584] Write at address 0x00600018 (0xffff9a945018): 0x00400040, readback 0x00400040 [2025-09-23 20:57:49.664] Loaded PowerVR consumer services. [2025-09-23 20:57:49.825] Waiting data available... [2025-09-23 20:57:49.825] 512+0 records in [2025-09-23 20:57:49.840] 512+0 records out [2025-09-23 20:57:49.856] Starting syslogd/klogd: done [2025-09-23 20:57:49.872] DML Start [2025-09-23 20:57:50.080] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:57:50.304] DML res1: 0 [2025-09-23 20:57:50.702] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:57:50.702] Read Success [2025-09-23 20:57:50.702] Verifying certificate... [2025-09-23 20:57:50.974] Verified OK [2025-09-23 20:57:50.990] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:57:52.557] Verified OK [2025-09-23 20:57:52.578] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:57:53.169] Verified OK [2025-09-23 20:57:53.169] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:57:55.980] fs.protected_hardlinks = 1 [2025-09-23 20:57:55.980] fs.protected_symlinks = 1 [2025-09-23 20:57:55.980] kernel.modules_disabled = 1 [2025-09-23 20:57:56.171] [2025-09-23 20:57:56.171] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:57:57.394] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:58:05.134] SBL1:1210.0.1.0 [2025-09-23 20:58:05.182] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:58:06.749] SBL2:1210.0.1.0 [2025-09-23 20:58:06.797] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:58:06.892] j-A [2025-09-23 20:58:14.247] The R5 Autosar Classic is running [2025-09-23 20:58:14.272] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:58:14.272] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:58:14.879] INIT: version 2.96 booting [2025-09-23 20:58:14.991] INIT: Entering runlevel: 5 [2025-09-23 20:58:15.151] mtd24 attached [2025-09-23 20:58:15.151] mtd28 attached [2025-09-23 20:58:15.167] mtd32 attached [2025-09-23 20:58:15.199] ubi0:textures is mounted. [2025-09-23 20:58:15.215] ubi1:animations is mounted. [2025-09-23 20:58:15.215] RTNETLINK answers: File exists [2025-09-23 20:58:15.268] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:58:15.268] ubi2:dml_code is mounted. [2025-09-23 20:58:15.268] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:58:15.268] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:58:15.268] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:58:15.268] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:58:15.268] data.LB_FadeInType0=100 [2025-09-23 20:58:15.268] data.CHLH_FadeInType0=0 [2025-09-23 20:58:15.268] data.WU_FadeInDelay=0 [2025-09-23 20:58:15.268] max_time_out=0 [2025-09-23 20:58:15.268] No splash screen [2025-09-23 20:58:15.268] stop dss Done [2025-09-23 20:58:15.349] /dev/mem opened. [2025-09-23 20:58:15.349] Memory mapped at address 0xffffb09e4000. [2025-09-23 20:58:15.349] Read at address 0x00600018 (0xffffb09e4018): 0x00000000 [2025-09-23 20:58:15.349] Write at address 0x00600018 (0xffffb09e4018): 0x00400040, readback 0x00400040 [2025-09-23 20:58:15.349] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:58:15.380] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:58:15.571] Loaded PowerVR consumer services. [2025-09-23 20:58:15.644] Waiting data available... [2025-09-23 20:58:15.644] 512+0 records in [2025-09-23 20:58:15.644] 512+0 records out [2025-09-23 20:58:15.660] Starting syslogd/klogd: done [2025-09-23 20:58:15.676] DML Start [2025-09-23 20:58:15.884] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:58:16.124] DML res1: 0 [2025-09-23 20:58:16.488] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:58:16.488] Read Success [2025-09-23 20:58:16.488] Verifying certificate... [2025-09-23 20:58:16.760] Verified OK [2025-09-23 20:58:16.776] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:58:18.588] Verified OK [2025-09-23 20:58:18.588] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:58:19.169] Verified OK [2025-09-23 20:58:19.169] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:58:21.711] fs.protected_hardlinks = 1 [2025-09-23 20:58:21.727] fs.protected_symlinks = 1 [2025-09-23 20:58:21.727] kernel.modules_disabled = 1 [2025-09-23 20:58:21.935] [2025-09-23 20:58:21.935] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:58:23.156] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:58:30.907] SBL1:1210.0.1.0 [2025-09-23 20:58:30.939] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:58:32.521] SBL2:1210.0.1.0 [2025-09-23 20:58:32.553] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:58:32.665] j-A [2025-09-23 20:58:40.038] The R5 Autosar Classic is running [2025-09-23 20:58:40.038] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:58:40.038] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:58:40.646] INIT: version 2.96 booting [2025-09-23 20:58:40.757] INIT: Entering runlevel: 5 [2025-09-23 20:58:40.918] mtd32 attached [2025-09-23 20:58:40.918] mtd24 attached [2025-09-23 20:58:40.934] mtd28 attached [2025-09-23 20:58:40.981] RTNETLINK answers: File exists [2025-09-23 20:58:40.981] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:58:41.025] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:58:41.025] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:58:41.025] ubi1:textures is mounted. [2025-09-23 20:58:41.025] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:58:41.025] ubi0:dml_code is mounted. [2025-09-23 20:58:41.025] ubi2:animations is mounted. [2025-09-23 20:58:41.025] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:58:41.083] data.LB_FadeInType0=100 [2025-09-23 20:58:41.083] data.CHLH_FadeInType0=0 [2025-09-23 20:58:41.083] data.WU_FadeInDelay=0 [2025-09-23 20:58:41.083] max_time_out=0 [2025-09-23 20:58:41.083] No splash screen [2025-09-23 20:58:41.083] stop dss Done [2025-09-23 20:58:41.083] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:58:41.083] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:58:41.137] /dev/mem opened. [2025-09-23 20:58:41.137] Memory mapped at address 0xffff85727000. [2025-09-23 20:58:41.137] Read at address 0x00600018 (0xffff85727018): 0x00000000 [2025-09-23 20:58:41.137] Write at address 0x00600018 (0xffff85727018): 0x00400040, readback 0x00400040 [2025-09-23 20:58:41.217] Loaded PowerVR consumer services. [2025-09-23 20:58:41.390] 512+0 records in [2025-09-23 20:58:41.390] 512+0 records out [2025-09-23 20:58:41.390] Waiting data available... [2025-09-23 20:58:41.422] Starting syslogd/klogd: done [2025-09-23 20:58:41.438] DML Start [2025-09-23 20:58:41.614] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:58:41.854] DML res1: 0 [2025-09-23 20:58:42.285] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:58:42.285] Read Success [2025-09-23 20:58:42.285] Verifying certificate... [2025-09-23 20:58:42.525] Verified OK [2025-09-23 20:58:42.557] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:58:44.338] Verified OK [2025-09-23 20:58:44.338] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:58:44.896] Verified OK [2025-09-23 20:58:44.896] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:58:47.454] fs.protected_hardlinks = 1 [2025-09-23 20:58:47.454] fs.protected_symlinks = 1 [2025-09-23 20:58:47.470] kernel.modules_disabled = 1 [2025-09-23 20:58:47.661] [2025-09-23 20:58:47.678] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:58:48.951] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:58:56.656] SBL1:1210.0.1.0 [2025-09-23 20:58:56.688] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:58:58.271] SBL2:1210.0.1.0 [2025-09-23 20:58:58.303] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:58:58.415] j-A [2025-09-23 20:59:05.754] The R5 Autosar Classic is running [2025-09-23 20:59:05.785] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:59:05.785] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:59:06.393] INIT: version 2.96 booting [2025-09-23 20:59:06.505] INIT: Entering runlevel: 5 [2025-09-23 20:59:06.649] mtd28 attached [2025-09-23 20:59:06.665] mtd32 attached [2025-09-23 20:59:06.681] mtd24 attached [2025-09-23 20:59:06.713] ubi0:animations is mounted. [2025-09-23 20:59:06.728] RTNETLINK answers: File exists [2025-09-23 20:59:06.790] ubi2:textures is mounted. [2025-09-23 20:59:06.790] ubi1:dml_code is mounted. [2025-09-23 20:59:06.790] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:59:06.790] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:59:06.790] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:59:06.790] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:59:06.790] data.LB_FadeInType0=100 [2025-09-23 20:59:06.790] data.CHLH_FadeInType0=0 [2025-09-23 20:59:06.790] data.WU_FadeInDelay=0 [2025-09-23 20:59:06.790] max_time_out=0 [2025-09-23 20:59:06.790] No splash screen [2025-09-23 20:59:06.790] stop dss Done [2025-09-23 20:59:06.790] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:59:06.822] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:59:06.822] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:59:06.858] /dev/mem opened. [2025-09-23 20:59:06.858] Memory mapped at address 0xffff7fe16000. [2025-09-23 20:59:06.858] Read at address 0x00600018 (0xffff7fe16018): 0x00000000 [2025-09-23 20:59:06.858] Write at address 0x00600018 (0xffff7fe16018): 0x00400040, readback 0x00400040 [2025-09-23 20:59:07.017] Loaded PowerVR consumer services. [2025-09-23 20:59:07.130] Waiting data available... [2025-09-23 20:59:07.162] 512+0 records in [2025-09-23 20:59:07.162] 512+0 records out [2025-09-23 20:59:07.193] Starting syslogd/klogd: done [2025-09-23 20:59:07.209] DML Start [2025-09-23 20:59:07.385] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:59:07.625] DML res1: 0 [2025-09-23 20:59:08.038] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:59:08.038] Read Success [2025-09-23 20:59:08.038] Verifying certificate... [2025-09-23 20:59:08.309] Verified OK [2025-09-23 20:59:08.325] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:59:09.908] Verified OK [2025-09-23 20:59:09.929] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:59:10.510] Verified OK [2025-09-23 20:59:10.510] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:59:13.180] fs.protected_hardlinks = 1 [2025-09-23 20:59:13.180] fs.protected_symlinks = 1 [2025-09-23 20:59:13.196] kernel.modules_disabled = 1 [2025-09-23 20:59:13.372] [2025-09-23 20:59:13.372] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:59:14.679] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:59:22.419] SBL1:1210.0.1.0 [2025-09-23 20:59:22.468] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:59:24.034] SBL2:1210.0.1.0 [2025-09-23 20:59:24.082] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:59:24.178] j-A [2025-09-23 20:59:31.534] The R5 Autosar Classic is running [2025-09-23 20:59:31.534] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:59:31.555] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:59:32.163] INIT: version 2.96 booting [2025-09-23 20:59:32.274] INIT: Entering runlevel: 5 [2025-09-23 20:59:32.434] mtd32 attached [2025-09-23 20:59:32.434] mtd24 attached [2025-09-23 20:59:32.450] mtd28 attached [2025-09-23 20:59:32.534] RTNETLINK answers: File exists [2025-09-23 20:59:32.534] ubi0:dml_code is mounted. [2025-09-23 20:59:32.534] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:59:32.534] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:59:32.534] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:59:32.534] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:59:32.534] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:59:32.534] ubi1:textures is mounted. [2025-09-23 20:59:32.534] ubi2:animations is mounted. [2025-09-23 20:59:32.550] data.LB_FadeInType0=100 [2025-09-23 20:59:32.571] data.CHLH_FadeInType0=0 [2025-09-23 20:59:32.571] data.WU_FadeInDelay=0 [2025-09-23 20:59:32.571] max_time_out=0 [2025-09-23 20:59:32.571] No splash screen [2025-09-23 20:59:32.571] stop dss Done [2025-09-23 20:59:32.571] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:59:32.593] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:59:32.644] /dev/mem opened. [2025-09-23 20:59:32.644] Memory mapped at address 0xffffbe0da000. [2025-09-23 20:59:32.644] Read at address 0x00600018 (0xffffbe0da018): 0x00000000 [2025-09-23 20:59:32.644] Write at address 0x00600018 (0xffffbe0da018): 0x00400040, readback 0x00400040 [2025-09-23 20:59:32.881] Loaded PowerVR consumer services. [2025-09-23 20:59:32.881] Waiting data available... [2025-09-23 20:59:32.897] 512+0 records in [2025-09-23 20:59:32.897] 512+0 records out [2025-09-23 20:59:32.945] Starting syslogd/klogd: done [2025-09-23 20:59:32.977] DML Start [2025-09-23 20:59:33.137] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:59:33.377] DML res1: 0 [2025-09-23 20:59:33.824] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:59:33.845] Read Success [2025-09-23 20:59:33.845] Verifying certificate... [2025-09-23 20:59:34.117] Verified OK [2025-09-23 20:59:34.133] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 20:59:35.812] Verified OK [2025-09-23 20:59:35.812] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 20:59:36.474] Verified OK [2025-09-23 20:59:36.474] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 20:59:39.048] fs.protected_hardlinks = 1 [2025-09-23 20:59:39.048] fs.protected_symlinks = 1 [2025-09-23 20:59:39.064] kernel.modules_disabled = 1 [2025-09-23 20:59:39.256] [2025-09-23 20:59:39.256] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 20:59:40.409] RTNETLINK answers: Cannot assign requested address [2025-09-23 20:59:48.179] SBL1:1210.0.1.0 [2025-09-23 20:59:48.226] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:59:49.794] SBL2:1210.0.1.0 [2025-09-23 20:59:49.842] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 20:59:49.937] j-A [2025-09-23 20:59:57.293] The R5 Autosar Classic is running [2025-09-23 20:59:57.315] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 20:59:57.315] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 20:59:57.923] INIT: version 2.96 booting [2025-09-23 20:59:58.036] INIT: Entering runlevel: 5 [2025-09-23 20:59:58.179] mtd24 attached [2025-09-23 20:59:58.195] mtd28 attached [2025-09-23 20:59:58.211] mtd32 attached [2025-09-23 20:59:58.259] ubi0:textures is mounted. [2025-09-23 20:59:58.259] RTNETLINK answers: File exists [2025-09-23 20:59:58.300] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 20:59:58.300] ubi1:animations is mounted. [2025-09-23 20:59:58.300] ubi2:dml_code is mounted. [2025-09-23 20:59:58.300] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 20:59:58.300] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 20:59:58.300] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 20:59:58.300] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 20:59:58.323] data.LB_FadeInType0=100 [2025-09-23 20:59:58.323] data.CHLH_FadeInType0=0 [2025-09-23 20:59:58.323] data.WU_FadeInDelay=0 [2025-09-23 20:59:58.323] max_time_out=0 [2025-09-23 20:59:58.323] No splash screen [2025-09-23 20:59:58.323] stop dss Done [2025-09-23 20:59:58.370] /dev/mem opened. [2025-09-23 20:59:58.370] Memory mapped at address 0xffff9ca30000. [2025-09-23 20:59:58.407] Read at address 0x00600018 (0xffff9ca30018): 0x00000000 [2025-09-23 20:59:58.407] Write at address 0x00600018 (0xffff9ca30018): 0x00400040, readback 0x00400040 [2025-09-23 20:59:58.407] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 20:59:58.407] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 20:59:58.519] Loaded PowerVR consumer services. [2025-09-23 20:59:58.674] Waiting data available... [2025-09-23 20:59:58.674] 512+0 records in [2025-09-23 20:59:58.674] 512+0 records out [2025-09-23 20:59:58.706] Starting syslogd/klogd: done [2025-09-23 20:59:58.722] DML Start [2025-09-23 20:59:58.930] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 20:59:59.138] DML res1: 0 [2025-09-23 20:59:59.563] Read DML Algo certificate (mtd31) and save to file [2025-09-23 20:59:59.563] Read Success [2025-09-23 20:59:59.563] Verifying certificate... [2025-09-23 20:59:59.802] Verified OK [2025-09-23 20:59:59.834] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:00:01.369] Verified OK [2025-09-23 21:00:01.369] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:00:02.009] Verified OK [2025-09-23 21:00:02.009] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:00:04.711] fs.protected_hardlinks = 1 [2025-09-23 21:00:04.711] fs.protected_symlinks = 1 [2025-09-23 21:00:04.727] kernel.modules_disabled = 1 [2025-09-23 21:00:04.919] [2025-09-23 21:00:04.919] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:00:06.225] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:00:13.956] SBL1:1210.0.1.0 [2025-09-23 21:00:13.988] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:00:15.570] SBL2:1210.0.1.0 [2025-09-23 21:00:15.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:00:15.715] j-A [2025-09-23 21:00:23.089] The R5 Autosar Classic is running [2025-09-23 21:00:23.089] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:00:23.089] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:00:23.696] INIT: version 2.96 booting [2025-09-23 21:00:23.808] INIT: Entering runlevel: 5 [2025-09-23 21:00:23.952] mtd24 attached [2025-09-23 21:00:23.968] mtd32 attached [2025-09-23 21:00:23.984] mtd28 attached [2025-09-23 21:00:24.016] ubi0:textures is mounted. [2025-09-23 21:00:24.032] RTNETLINK answers: File exists [2025-09-23 21:00:24.032] ubi1:dml_code is mounted. [2025-09-23 21:00:24.100] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:00:24.100] ubi2:animations is mounted. [2025-09-23 21:00:24.100] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:00:24.100] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:00:24.100] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:00:24.100] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:00:24.100] data.LB_FadeInType0=100 [2025-09-23 21:00:24.100] data.CHLH_FadeInType0=0 [2025-09-23 21:00:24.100] data.WU_FadeInDelay=0 [2025-09-23 21:00:24.100] max_time_out=0 [2025-09-23 21:00:24.100] No splash screen [2025-09-23 21:00:24.100] stop dss Done [2025-09-23 21:00:24.180] /dev/mem opened. [2025-09-23 21:00:24.180] Memory mapped at address 0xffffb441d000. [2025-09-23 21:00:24.180] Read at address 0x00600018 (0xffffb441d018): 0x00000000 [2025-09-23 21:00:24.180] Write at address 0x00600018 (0xffffb441d018): 0x00400040, readback 0x00400040 [2025-09-23 21:00:24.180] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:00:24.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:00:24.373] Loaded PowerVR consumer services. [2025-09-23 21:00:24.421] Waiting data available... [2025-09-23 21:00:24.421] 512+0 records in [2025-09-23 21:00:24.437] 512+0 records out [2025-09-23 21:00:24.469] Starting syslogd/klogd: done [2025-09-23 21:00:24.485] DML Start [2025-09-23 21:00:24.644] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:00:24.837] DML res1: 0 [2025-09-23 21:00:25.436] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:00:25.436] Read Success [2025-09-23 21:00:25.436] Verifying certificate... [2025-09-23 21:00:25.660] Verified OK [2025-09-23 21:00:25.676] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:00:27.401] Verified OK [2025-09-23 21:00:27.401] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:00:27.928] Verified OK [2025-09-23 21:00:27.928] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:00:30.391] fs.protected_hardlinks = 1 [2025-09-23 21:00:30.391] fs.protected_symlinks = 1 [2025-09-23 21:00:30.391] kernel.modules_disabled = 1 [2025-09-23 21:00:30.598] [2025-09-23 21:00:30.598] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:00:31.982] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:00:39.715] SBL1:1210.0.1.0 [2025-09-23 21:00:39.747] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:00:41.330] SBL2:1210.0.1.0 [2025-09-23 21:00:41.362] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:00:41.474] j-A [2025-09-23 21:00:48.829] The R5 Autosar Classic is running [2025-09-23 21:00:48.829] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:00:48.850] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:00:49.458] INIT: version 2.96 booting [2025-09-23 21:00:49.570] INIT: Entering runlevel: 5 [2025-09-23 21:00:49.714] mtd24 attached [2025-09-23 21:00:49.730] mtd32 attached [2025-09-23 21:00:49.746] mtd28 attached [2025-09-23 21:00:49.827] ubi0:textures is mounted. [2025-09-23 21:00:49.827] RTNETLINK answers: File exists [2025-09-23 21:00:49.827] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:00:49.827] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:00:49.827] ubi2:animations is mounted. [2025-09-23 21:00:49.827] ubi1:dml_code is mounted. [2025-09-23 21:00:49.827] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:00:49.827] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:00:49.827] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:00:49.827] data.LB_FadeInType0=100 [2025-09-23 21:00:49.848] data.CHLH_FadeInType0=0 [2025-09-23 21:00:49.848] data.WU_FadeInDelay=0 [2025-09-23 21:00:49.848] max_time_out=0 [2025-09-23 21:00:49.848] No splash screen [2025-09-23 21:00:49.848] stop dss Done [2025-09-23 21:00:49.864] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:00:49.886] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:00:49.933] /dev/mem opened. [2025-09-23 21:00:49.933] Memory mapped at address 0xffff8ef2a000. [2025-09-23 21:00:49.933] Read at address 0x00600018 (0xffff8ef2a018): 0x00000000 [2025-09-23 21:00:49.933] Write at address 0x00600018 (0xffff8ef2a018): 0x00400040, readback 0x00400040 [2025-09-23 21:00:50.062] Loaded PowerVR consumer services. [2025-09-23 21:00:50.174] Waiting data available... [2025-09-23 21:00:50.189] 512+0 records in [2025-09-23 21:00:50.189] 512+0 records out [2025-09-23 21:00:50.205] Starting syslogd/klogd: done [2025-09-23 21:00:50.237] DML Start [2025-09-23 21:00:50.414] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:00:50.621] DML res1: 0 [2025-09-23 21:00:51.108] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:00:51.108] Read Success [2025-09-23 21:00:51.108] Verifying certificate... [2025-09-23 21:00:51.348] Verified OK [2025-09-23 21:00:51.364] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:00:53.007] Verified OK [2025-09-23 21:00:53.007] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:00:53.599] Verified OK [2025-09-23 21:00:53.599] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:00:56.238] fs.protected_hardlinks = 1 [2025-09-23 21:00:56.238] fs.protected_symlinks = 1 [2025-09-23 21:00:56.253] kernel.modules_disabled = 1 [2025-09-23 21:00:56.445] [2025-09-23 21:00:56.445] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:00:57.698] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:01:05.491] SBL1:1210.0.1.0 [2025-09-23 21:01:05.523] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:01:07.106] SBL2:1210.0.1.0 [2025-09-23 21:01:07.137] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:01:07.250] j-A [2025-09-23 21:01:14.604] The R5 Autosar Classic is running [2025-09-23 21:01:14.604] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:01:14.625] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:01:15.233] INIT: version 2.96 booting [2025-09-23 21:01:15.345] INIT: Entering runlevel: 5 [2025-09-23 21:01:15.505] mtd24 attached [2025-09-23 21:01:15.505] mtd32 attached [2025-09-23 21:01:15.520] mtd28 attached [2025-09-23 21:01:15.552] ubi0:textures is mounted. [2025-09-23 21:01:15.568] RTNETLINK answers: File exists [2025-09-23 21:01:15.628] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:01:15.628] ubi2:animations is mounted. [2025-09-23 21:01:15.628] ubi1:dml_code is mounted. [2025-09-23 21:01:15.628] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:01:15.628] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:01:15.628] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:01:15.628] data.LB_FadeInType0=100 [2025-09-23 21:01:15.628] data.CHLH_FadeInType0=0 [2025-09-23 21:01:15.628] data.WU_FadeInDelay=0 [2025-09-23 21:01:15.628] max_time_out=0 [2025-09-23 21:01:15.628] No splash screen [2025-09-23 21:01:15.628] stop dss Done [2025-09-23 21:01:15.628] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:01:15.692] /dev/mem opened. [2025-09-23 21:01:15.692] Memory mapped at address 0xffffaea7c000. [2025-09-23 21:01:15.692] Read at address 0x00600018 (0xffffaea7c018): 0x00000000 [2025-09-23 21:01:15.692] Write at address 0x00600018 (0xffffaea7c018): 0x00400040, readback 0x00400040 [2025-09-23 21:01:15.707] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:01:15.723] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:01:15.883] Loaded PowerVR consumer services. [2025-09-23 21:01:15.964] Waiting data available... [2025-09-23 21:01:15.979] 512+0 records in [2025-09-23 21:01:15.979] 512+0 records out [2025-09-23 21:01:16.027] Starting syslogd/klogd: done [2025-09-23 21:01:16.059] DML Start [2025-09-23 21:01:16.219] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:01:16.427] DML res1: 0 [2025-09-23 21:01:16.897] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:01:16.897] Read Success [2025-09-23 21:01:16.897] Verifying certificate... [2025-09-23 21:01:17.137] Verified OK [2025-09-23 21:01:17.137] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:01:18.840] Verified OK [2025-09-23 21:01:18.840] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:01:19.407] Verified OK [2025-09-23 21:01:19.407] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:01:21.901] fs.protected_hardlinks = 1 [2025-09-23 21:01:21.917] fs.protected_symlinks = 1 [2025-09-23 21:01:21.933] kernel.modules_disabled = 1 [2025-09-23 21:01:22.141] [2025-09-23 21:01:22.141] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:01:23.466] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:01:31.269] SBL1:1210.0.1.0 [2025-09-23 21:01:31.301] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:01:32.884] SBL2:1210.0.1.0 [2025-09-23 21:01:32.915] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:01:33.028] j-A [2025-09-23 21:01:40.398] The R5 Autosar Classic is running [2025-09-23 21:01:40.398] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:01:40.398] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:01:41.006] INIT: version 2.96 booting [2025-09-23 21:01:41.119] INIT: Entering runlevel: 5 [2025-09-23 21:01:41.262] mtd24 attached [2025-09-23 21:01:41.278] mtd28 attached [2025-09-23 21:01:41.278] mtd32 attached [2025-09-23 21:01:41.326] ubi0:textures is mounted. [2025-09-23 21:01:41.342] ubi1:animations is mounted. [2025-09-23 21:01:41.342] RTNETLINK answers: File exists [2025-09-23 21:01:41.398] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:01:41.398] ubi2:dml_code is mounted. [2025-09-23 21:01:41.398] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:01:41.398] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:01:41.398] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:01:41.398] data.LB_FadeInType0=100 [2025-09-23 21:01:41.398] data.CHLH_FadeInType0=0 [2025-09-23 21:01:41.398] data.WU_FadeInDelay=0 [2025-09-23 21:01:41.398] max_time_out=0 [2025-09-23 21:01:41.398] No splash screen [2025-09-23 21:01:41.398] stop dss Done [2025-09-23 21:01:41.398] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:01:41.466] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:01:41.466] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:01:41.466] /dev/mem opened. [2025-09-23 21:01:41.466] Memory mapped at address 0xffff9862a000. [2025-09-23 21:01:41.466] Read at address 0x00600018 (0xffff9862a018): 0x00000000 [2025-09-23 21:01:41.466] Write at address 0x00600018 (0xffff9862a018): 0x00400040, readback 0x00400040 [2025-09-23 21:01:41.706] Loaded PowerVR consumer services. [2025-09-23 21:01:41.738] Waiting data available... [2025-09-23 21:01:41.754] 512+0 records in [2025-09-23 21:01:41.754] 512+0 records out [2025-09-23 21:01:41.802] Starting syslogd/klogd: done [2025-09-23 21:01:41.818] DML Start [2025-09-23 21:01:41.961] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:01:42.201] DML res1: 0 [2025-09-23 21:01:42.679] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:01:42.679] Read Success [2025-09-23 21:01:42.679] Verifying certificate... [2025-09-23 21:01:42.966] Verified OK [2025-09-23 21:01:42.983] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:01:44.708] Verified OK [2025-09-23 21:01:44.708] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:01:45.315] Verified OK [2025-09-23 21:01:45.315] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:01:47.793] fs.protected_hardlinks = 1 [2025-09-23 21:01:47.809] fs.protected_symlinks = 1 [2025-09-23 21:01:47.809] kernel.modules_disabled = 1 [2025-09-23 21:01:48.017] [2025-09-23 21:01:48.017] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:01:49.304] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:01:57.015] SBL1:1210.0.1.0 [2025-09-23 21:01:57.063] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:01:58.630] SBL2:1210.0.1.0 [2025-09-23 21:01:58.662] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:01:58.774] j-A [2025-09-23 21:02:06.128] The R5 Autosar Classic is running [2025-09-23 21:02:06.128] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:02:06.149] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:02:06.757] INIT: version 2.96 booting [2025-09-23 21:02:06.868] INIT: Entering runlevel: 5 [2025-09-23 21:02:07.028] mtd24 attached [2025-09-23 21:02:07.028] mtd28 attached [2025-09-23 21:02:07.044] mtd32 attached [2025-09-23 21:02:07.093] RTNETLINK answers: File exists [2025-09-23 21:02:07.159] ubi0:textures is mounted. [2025-09-23 21:02:07.159] ubi1:animations is mounted. [2025-09-23 21:02:07.159] ubi2:dml_code is mounted. [2025-09-23 21:02:07.159] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:02:07.159] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:02:07.159] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:02:07.159] data.LB_FadeInType0=100 [2025-09-23 21:02:07.159] data.CHLH_FadeInType0=0 [2025-09-23 21:02:07.159] data.WU_FadeInDelay=0 [2025-09-23 21:02:07.159] max_time_out=0 [2025-09-23 21:02:07.159] No splash screen [2025-09-23 21:02:07.159] stop dss Done [2025-09-23 21:02:07.159] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:02:07.159] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:02:07.230] /dev/mem opened. [2025-09-23 21:02:07.230] Memory mapped at address 0xffff9c724000. [2025-09-23 21:02:07.230] Read at address 0x00600018 (0xffff9c724018): 0x00000000 [2025-09-23 21:02:07.230] Write at address 0x00600018 (0xffff9c724018): 0x00400040, readback 0x00400040 [2025-09-23 21:02:07.230] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:02:07.245] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:02:07.389] Loaded PowerVR consumer services. [2025-09-23 21:02:07.485] Waiting data available... [2025-09-23 21:02:07.501] 512+0 records in [2025-09-23 21:02:07.501] 512+0 records out [2025-09-23 21:02:07.564] Starting syslogd/klogd: done [2025-09-23 21:02:07.580] DML Start [2025-09-23 21:02:07.756] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:02:07.997] DML res1: 0 [2025-09-23 21:02:08.381] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:02:08.402] Read Success [2025-09-23 21:02:08.402] Verifying certificate... [2025-09-23 21:02:08.641] Verified OK [2025-09-23 21:02:08.657] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:02:10.359] Verified OK [2025-09-23 21:02:10.359] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:02:10.956] Verified OK [2025-09-23 21:02:10.956] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:02:13.531] fs.protected_hardlinks = 1 [2025-09-23 21:02:13.531] fs.protected_symlinks = 1 [2025-09-23 21:02:13.547] kernel.modules_disabled = 1 [2025-09-23 21:02:13.723] [2025-09-23 21:02:13.723] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:02:15.082] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:02:22.775] SBL1:1210.0.1.0 [2025-09-23 21:02:22.807] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:02:24.390] SBL2:1210.0.1.0 [2025-09-23 21:02:24.421] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:02:24.533] j-A [2025-09-23 21:02:31.908] The R5 Autosar Classic is running [2025-09-23 21:02:31.908] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:02:31.908] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:02:32.515] INIT: version 2.96 booting [2025-09-23 21:02:32.626] INIT: Entering runlevel: 5 [2025-09-23 21:02:32.771] mtd24 attached [2025-09-23 21:02:32.787] mtd28 attached [2025-09-23 21:02:32.819] ubi0:textures is mounted. [2025-09-23 21:02:32.835] mtd32 attached [2025-09-23 21:02:32.835] ubi1:animations is mounted. [2025-09-23 21:02:32.851] RTNETLINK answers: File exists [2025-09-23 21:02:32.890] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:02:32.890] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:02:32.890] ubi2:dml_code is mounted. [2025-09-23 21:02:32.890] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:02:32.890] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:02:32.890] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:02:32.890] data.LB_FadeInType0=100 [2025-09-23 21:02:32.890] data.CHLH_FadeInType0=0 [2025-09-23 21:02:32.911] data.WU_FadeInDelay=0 [2025-09-23 21:02:32.911] max_time_out=0 [2025-09-23 21:02:32.911] No splash screen [2025-09-23 21:02:32.911] stop dss Done [2025-09-23 21:02:32.928] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:02:32.984] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:02:32.984] /dev/mem opened. [2025-09-23 21:02:32.984] Memory mapped at address 0xffffa410b000. [2025-09-23 21:02:32.984] Read at address 0x00600018 (0xffffa410b018): 0x00000000 [2025-09-23 21:02:32.984] Write at address 0x00600018 (0xffffa410b018): 0x00400040, readback 0x00400040 [2025-09-23 21:02:33.112] Loaded PowerVR consumer services. [2025-09-23 21:02:33.255] Waiting data available... [2025-09-23 21:02:33.255] 512+0 records in [2025-09-23 21:02:33.271] 512+0 records out [2025-09-23 21:02:33.287] Starting syslogd/klogd: done [2025-09-23 21:02:33.303] DML Start [2025-09-23 21:02:33.479] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:02:33.703] DML res1: 0 [2025-09-23 21:02:34.163] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:02:34.163] Read Success [2025-09-23 21:02:34.163] Verifying certificate... [2025-09-23 21:02:34.403] Verified OK [2025-09-23 21:02:34.419] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:02:36.078] Verified OK [2025-09-23 21:02:36.078] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:02:36.757] Verified OK [2025-09-23 21:02:36.757] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:02:39.459] fs.protected_hardlinks = 1 [2025-09-23 21:02:39.459] fs.protected_symlinks = 1 [2025-09-23 21:02:39.459] kernel.modules_disabled = 1 [2025-09-23 21:02:39.651] [2025-09-23 21:02:39.651] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:02:40.769] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:02:48.544] SBL1:1210.0.1.0 [2025-09-23 21:02:48.592] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:02:50.159] SBL2:1210.0.1.0 [2025-09-23 21:02:50.207] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:02:50.303] j-A [2025-09-23 21:02:57.658] The R5 Autosar Classic is running [2025-09-23 21:02:57.682] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:02:57.682] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:02:58.290] INIT: version 2.96 booting [2025-09-23 21:02:58.401] INIT: Entering runlevel: 5 [2025-09-23 21:02:58.561] mtd28 attached [2025-09-23 21:02:58.577] mtd32 attached [2025-09-23 21:02:58.577] mtd24 attached [2025-09-23 21:02:58.609] ubi0:animations is mounted. [2025-09-23 21:02:58.625] ubi1:dml_code is mounted. [2025-09-23 21:02:58.684] RTNETLINK answers: File exists [2025-09-23 21:02:58.684] ubi2:textures is mounted. [2025-09-23 21:02:58.684] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:02:58.684] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:02:58.684] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:02:58.684] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:02:58.684] data.LB_FadeInType0=100 [2025-09-23 21:02:58.684] data.CHLH_FadeInType0=0 [2025-09-23 21:02:58.684] data.WU_FadeInDelay=0 [2025-09-23 21:02:58.684] max_time_out=0 [2025-09-23 21:02:58.684] No splash screen [2025-09-23 21:02:58.684] stop dss Done [2025-09-23 21:02:58.684] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:02:58.769] /dev/mem opened. [2025-09-23 21:02:58.769] Memory mapped at address 0xffffbb058000. [2025-09-23 21:02:58.769] Read at address 0x00600018 (0xffffbb058018): 0x00000000 [2025-09-23 21:02:58.769] Write at address 0x00600018 (0xffffbb058018): 0x00400040, readback 0x00400040 [2025-09-23 21:02:58.769] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:02:58.769] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:02:58.865] Loaded PowerVR consumer services. [2025-09-23 21:02:59.009] Waiting data available... [2025-09-23 21:02:59.025] 512+0 records in [2025-09-23 21:02:59.025] 512+0 records out [2025-09-23 21:02:59.057] Starting syslogd/klogd: done [2025-09-23 21:02:59.073] DML Start [2025-09-23 21:02:59.248] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:02:59.472] DML res1: 0 [2025-09-23 21:02:59.882] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:02:59.882] Read Success [2025-09-23 21:02:59.882] Verifying certificate... [2025-09-23 21:03:00.105] Verified OK [2025-09-23 21:03:00.121] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:03:01.741] Verified OK [2025-09-23 21:03:01.741] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:03:02.285] Verified OK [2025-09-23 21:03:02.306] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:03:05.104] fs.protected_hardlinks = 1 [2025-09-23 21:03:05.104] fs.protected_symlinks = 1 [2025-09-23 21:03:05.120] kernel.modules_disabled = 1 [2025-09-23 21:03:05.327] [2025-09-23 21:03:05.327] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:03:06.507] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:03:14.291] SBL1:1210.0.1.0 [2025-09-23 21:03:14.339] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:03:15.906] SBL2:1210.0.1.0 [2025-09-23 21:03:15.954] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:03:16.066] j-A [2025-09-23 21:03:23.405] The R5 Autosar Classic is running [2025-09-23 21:03:23.430] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:03:23.430] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:03:24.038] INIT: version 2.96 booting [2025-09-23 21:03:24.150] INIT: Entering runlevel: 5 [2025-09-23 21:03:24.310] mtd32 attached [2025-09-23 21:03:24.326] mtd28 attached [2025-09-23 21:03:24.326] mtd24 attached [2025-09-23 21:03:24.374] ubi0:dml_code is mounted. [2025-09-23 21:03:24.407] RTNETLINK answers: File exists [2025-09-23 21:03:24.407] ubi1:animations is mounted. [2025-09-23 21:03:24.407] ubi2:textures is mounted. [2025-09-23 21:03:24.407] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:03:24.407] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:03:24.407] data.LB_FadeInType0=100 [2025-09-23 21:03:24.439] data.CHLH_FadeInType0=0 [2025-09-23 21:03:24.439] data.WU_FadeInDelay=0 [2025-09-23 21:03:24.439] max_time_out=0 [2025-09-23 21:03:24.439] No splash screen [2025-09-23 21:03:24.439] stop dss Done [2025-09-23 21:03:24.439] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:03:24.439] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:03:24.439] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:03:24.471] /dev/mem opened. [2025-09-23 21:03:24.503] Memory mapped at address 0xffff81a52000. [2025-09-23 21:03:24.503] Read at address 0x00600018 (0xffff81a52018): 0x00000000 [2025-09-23 21:03:24.503] Write at address 0x00600018 (0xffff81a52018): 0x00400040, readback 0x00400040 [2025-09-23 21:03:24.563] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:03:24.563] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:03:24.643] Loaded PowerVR consumer services. [2025-09-23 21:03:24.756] Waiting data available... [2025-09-23 21:03:24.772] 512+0 records in [2025-09-23 21:03:24.772] 512+0 records out [2025-09-23 21:03:24.804] Starting syslogd/klogd: done [2025-09-23 21:03:24.820] DML Start [2025-09-23 21:03:24.995] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:03:25.203] DML res1: 0 [2025-09-23 21:03:25.770] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:03:25.770] Read Success [2025-09-23 21:03:25.770] Verifying certificate... [2025-09-23 21:03:26.010] Verified OK [2025-09-23 21:03:26.041] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:03:27.735] Verified OK [2025-09-23 21:03:27.735] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:03:28.289] Verified OK [2025-09-23 21:03:28.289] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:03:30.831] fs.protected_hardlinks = 1 [2025-09-23 21:03:30.831] fs.protected_symlinks = 1 [2025-09-23 21:03:30.847] kernel.modules_disabled = 1 [2025-09-23 21:03:31.038] [2025-09-23 21:03:31.038] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:03:32.234] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:03:40.059] SBL1:1210.0.1.0 [2025-09-23 21:03:40.091] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:03:41.673] SBL2:1210.0.1.0 [2025-09-23 21:03:41.705] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:03:41.817] j-A [2025-09-23 21:03:49.192] The R5 Autosar Classic is running [2025-09-23 21:03:49.192] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:03:49.192] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:03:49.800] INIT: version 2.96 booting [2025-09-23 21:03:49.912] INIT: Entering runlevel: 5 [2025-09-23 21:03:50.056] mtd28 attached [2025-09-23 21:03:50.072] mtd32 attached [2025-09-23 21:03:50.088] mtd24 attached [2025-09-23 21:03:50.190] ubi0:animations is mounted. [2025-09-23 21:03:50.190] RTNETLINK answers: File exists [2025-09-23 21:03:50.190] ubi1:dml_code is mounted. [2025-09-23 21:03:50.190] ubi2:textures is mounted. [2025-09-23 21:03:50.190] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:03:50.190] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:03:50.190] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:03:50.190] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:03:50.190] data.LB_FadeInType0=100 [2025-09-23 21:03:50.190] data.CHLH_FadeInType0=0 [2025-09-23 21:03:50.190] data.WU_FadeInDelay=0 [2025-09-23 21:03:50.190] max_time_out=0 [2025-09-23 21:03:50.190] No splash screen [2025-09-23 21:03:50.190] stop dss Done [2025-09-23 21:03:50.190] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:03:50.260] /dev/mem opened. [2025-09-23 21:03:50.260] Memory mapped at address 0xffff9d290000. [2025-09-23 21:03:50.260] Read at address 0x00600018 (0xffff9d290018): 0x00000000 [2025-09-23 21:03:50.260] Write at address 0x00600018 (0xffff9d290018): 0x00400040, readback 0x00400040 [2025-09-23 21:03:50.276] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:03:50.292] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:03:50.532] Loaded PowerVR consumer services. [2025-09-23 21:03:50.592] Waiting data available... [2025-09-23 21:03:50.592] 512+0 records in [2025-09-23 21:03:50.592] 512+0 records out [2025-09-23 21:03:50.607] Starting syslogd/klogd: done [2025-09-23 21:03:50.623] DML Start [2025-09-23 21:03:50.816] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:03:50.991] DML res1: 0 [2025-09-23 21:03:51.478] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:03:51.478] Read Success [2025-09-23 21:03:51.478] Verifying certificate... [2025-09-23 21:03:51.701] Verified OK [2025-09-23 21:03:51.717] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:03:53.442] Verified OK [2025-09-23 21:03:53.442] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:03:54.056] Verified OK [2025-09-23 21:03:54.056] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:03:56.646] fs.protected_hardlinks = 1 [2025-09-23 21:03:56.661] fs.protected_symlinks = 1 [2025-09-23 21:03:56.661] kernel.modules_disabled = 1 [2025-09-23 21:03:56.854] [2025-09-23 21:03:56.854] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:03:58.044] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:04:05.798] SBL1:1210.0.1.0 [2025-09-23 21:04:05.846] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:04:07.413] SBL2:1210.0.1.0 [2025-09-23 21:04:07.461] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:04:07.556] j-A [2025-09-23 21:04:14.912] The R5 Autosar Classic is running [2025-09-23 21:04:14.933] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:04:14.933] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:04:15.540] INIT: version 2.96 booting [2025-09-23 21:04:15.653] INIT: Entering runlevel: 5 [2025-09-23 21:04:15.797] mtd24 attached [2025-09-23 21:04:15.813] mtd28 attached [2025-09-23 21:04:15.829] mtd32 attached [2025-09-23 21:04:15.860] RTNETLINK answers: File exists [2025-09-23 21:04:15.934] ubi0:textures is mounted. [2025-09-23 21:04:15.934] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:04:15.934] ubi1:animations is mounted. [2025-09-23 21:04:15.934] ubi2:dml_code is mounted. [2025-09-23 21:04:15.934] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:04:15.934] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:04:15.934] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:04:15.934] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:04:15.934] data.LB_FadeInType0=100 [2025-09-23 21:04:15.934] data.CHLH_FadeInType0=0 [2025-09-23 21:04:15.934] data.WU_FadeInDelay=0 [2025-09-23 21:04:15.934] max_time_out=0 [2025-09-23 21:04:15.934] No splash screen [2025-09-23 21:04:15.934] stop dss Done [2025-09-23 21:04:15.949] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:04:15.966] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:04:15.982] /dev/mem opened. [2025-09-23 21:04:15.982] Memory mapped at address 0xffffbde6a000. [2025-09-23 21:04:16.008] Read at address 0x00600018 (0xffffbde6a018): 0x00000000 [2025-09-23 21:04:16.008] Write at address 0x00600018 (0xffffbde6a018): 0x00400040, readback 0x00400040 [2025-09-23 21:04:16.135] Loaded PowerVR consumer services. [2025-09-23 21:04:16.264] Waiting data available... [2025-09-23 21:04:16.280] 512+0 records in [2025-09-23 21:04:16.280] 512+0 records out [2025-09-23 21:04:16.296] Starting syslogd/klogd: done [2025-09-23 21:04:16.312] DML Start [2025-09-23 21:04:16.455] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:04:16.663] DML res1: 0 [2025-09-23 21:04:17.159] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:04:17.159] Read Success [2025-09-23 21:04:17.175] Verifying certificate... [2025-09-23 21:04:17.399] Verified OK [2025-09-23 21:04:17.415] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:04:19.094] Verified OK [2025-09-23 21:04:19.094] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:04:19.728] Verified OK [2025-09-23 21:04:19.728] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:04:22.335] fs.protected_hardlinks = 1 [2025-09-23 21:04:22.365] fs.protected_symlinks = 1 [2025-09-23 21:04:22.365] kernel.modules_disabled = 1 [2025-09-23 21:04:22.541] [2025-09-23 21:04:22.541] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:04:23.795] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:04:31.561] SBL1:1210.0.1.0 [2025-09-23 21:04:31.593] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:04:33.176] SBL2:1210.0.1.0 [2025-09-23 21:04:33.208] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:04:33.320] j-A [2025-09-23 21:04:40.695] The R5 Autosar Classic is running [2025-09-23 21:04:40.695] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:04:40.695] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:04:41.303] INIT: version 2.96 booting [2025-09-23 21:04:41.414] INIT: Entering runlevel: 5 [2025-09-23 21:04:41.575] mtd24 attached [2025-09-23 21:04:41.575] mtd28 attached [2025-09-23 21:04:41.607] mtd32 attached [2025-09-23 21:04:41.623] ubi0:textures is mounted. [2025-09-23 21:04:41.638] ubi1:animations is mounted. [2025-09-23 21:04:41.699] RTNETLINK answers: File exists [2025-09-23 21:04:41.699] ubi2:dml_code is mounted. [2025-09-23 21:04:41.699] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:04:41.699] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:04:41.699] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:04:41.699] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:04:41.699] data.LB_FadeInType0=100 [2025-09-23 21:04:41.699] data.CHLH_FadeInType0=0 [2025-09-23 21:04:41.699] data.WU_FadeInDelay=0 [2025-09-23 21:04:41.699] max_time_out=0 [2025-09-23 21:04:41.699] No splash screen [2025-09-23 21:04:41.699] stop dss Done [2025-09-23 21:04:41.699] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:04:41.770] /dev/mem opened. [2025-09-23 21:04:41.770] Memory mapped at address 0xffff88c8e000. [2025-09-23 21:04:41.770] Read at address 0x00600018 (0xffff88c8e018): 0x00000000 [2025-09-23 21:04:41.770] Write at address 0x00600018 (0xffff88c8e018): 0x00400040, readback 0x00400040 [2025-09-23 21:04:41.770] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:04:41.770] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:04:42.011] Loaded PowerVR consumer services. [2025-09-23 21:04:42.059] Waiting data available... [2025-09-23 21:04:42.091] 512+0 records in [2025-09-23 21:04:42.091] 512+0 records out [2025-09-23 21:04:42.122] Starting syslogd/klogd: done [2025-09-23 21:04:42.138] DML Start [2025-09-23 21:04:42.346] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:04:42.554] DML res1: 0 [2025-09-23 21:04:42.970] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:04:42.991] Read Success [2025-09-23 21:04:42.991] Verifying certificate... [2025-09-23 21:04:43.215] Verified OK [2025-09-23 21:04:43.231] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:04:44.894] Verified OK [2025-09-23 21:04:44.894] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:04:45.454] Verified OK [2025-09-23 21:04:45.454] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:04:48.172] fs.protected_hardlinks = 1 [2025-09-23 21:04:48.188] fs.protected_symlinks = 1 [2025-09-23 21:04:48.188] kernel.modules_disabled = 1 [2025-09-23 21:04:48.396] [2025-09-23 21:04:48.396] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:04:49.607] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:04:57.319] SBL1:1210.0.1.0 [2025-09-23 21:04:57.367] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:04:58.933] SBL2:1210.0.1.0 [2025-09-23 21:04:58.981] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:04:59.094] j-A [2025-09-23 21:05:06.432] The R5 Autosar Classic is running [2025-09-23 21:05:06.463] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:05:06.463] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:05:07.071] INIT: version 2.96 booting [2025-09-23 21:05:07.183] INIT: Entering runlevel: 5 [2025-09-23 21:05:07.327] mtd24 attached [2025-09-23 21:05:07.343] mtd32 attached [2025-09-23 21:05:07.359] mtd28 attached [2025-09-23 21:05:07.407] RTNETLINK answers: File exists [2025-09-23 21:05:07.407] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:05:07.448] ubi0:textures is mounted. [2025-09-23 21:05:07.448] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:05:07.448] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:05:07.448] ubi2:animations is mounted. [2025-09-23 21:05:07.448] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:05:07.448] ubi1:dml_code is mounted. [2025-09-23 21:05:07.448] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:05:07.499] data.LB_FadeInType0=100 [2025-09-23 21:05:07.499] data.CHLH_FadeInType0=0 [2025-09-23 21:05:07.499] data.WU_FadeInDelay=0 [2025-09-23 21:05:07.499] max_time_out=0 [2025-09-23 21:05:07.499] No splash screen [2025-09-23 21:05:07.499] stop dss Done [2025-09-23 21:05:07.499] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:05:07.499] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:05:07.549] /dev/mem opened. [2025-09-23 21:05:07.549] Memory mapped at address 0xffff8c0dd000. [2025-09-23 21:05:07.549] Read at address 0x00600018 (0xffff8c0dd018): 0x00000000 [2025-09-23 21:05:07.549] Write at address 0x00600018 (0xffff8c0dd018): 0x00400040, readback 0x00400040 [2025-09-23 21:05:07.773] Loaded PowerVR consumer services. [2025-09-23 21:05:07.804] Waiting data available... [2025-09-23 21:05:07.820] 512+0 records in [2025-09-23 21:05:07.820] 512+0 records out [2025-09-23 21:05:07.868] Starting syslogd/klogd: done [2025-09-23 21:05:07.884] DML Start [2025-09-23 21:05:08.013] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:05:08.269] DML res1: 0 [2025-09-23 21:05:08.742] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:05:08.742] Read Success [2025-09-23 21:05:08.742] Verifying certificate... [2025-09-23 21:05:09.013] Verified OK [2025-09-23 21:05:09.030] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:05:10.610] Verified OK [2025-09-23 21:05:10.610] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:05:11.209] Verified OK [2025-09-23 21:05:11.209] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:05:13.895] fs.protected_hardlinks = 1 [2025-09-23 21:05:13.895] fs.protected_symlinks = 1 [2025-09-23 21:05:13.895] kernel.modules_disabled = 1 [2025-09-23 21:05:14.087] [2025-09-23 21:05:14.087] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:05:15.347] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:05:23.077] SBL1:1210.0.1.0 [2025-09-23 21:05:23.125] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:05:24.691] SBL2:1210.0.1.0 [2025-09-23 21:05:24.739] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:05:24.851] j-A [2025-09-23 21:05:32.189] The R5 Autosar Classic is running [2025-09-23 21:05:32.214] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:05:32.214] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:05:32.822] INIT: version 2.96 booting [2025-09-23 21:05:32.934] INIT: Entering runlevel: 5 [2025-09-23 21:05:33.094] mtd24 attached [2025-09-23 21:05:33.094] mtd28 attached [2025-09-23 21:05:33.110] mtd32 attached [2025-09-23 21:05:33.220] ubi1:animations is mounted. [2025-09-23 21:05:33.220] RTNETLINK answers: File exists [2025-09-23 21:05:33.220] ubi0:textures is mounted. [2025-09-23 21:05:33.220] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:05:33.220] ubi2:dml_code is mounted. [2025-09-23 21:05:33.220] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:05:33.220] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:05:33.220] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:05:33.220] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:05:33.220] data.LB_FadeInType0=100 [2025-09-23 21:05:33.220] data.CHLH_FadeInType0=0 [2025-09-23 21:05:33.220] data.WU_FadeInDelay=0 [2025-09-23 21:05:33.220] max_time_out=0 [2025-09-23 21:05:33.220] No splash screen [2025-09-23 21:05:33.220] stop dss Done [2025-09-23 21:05:33.252] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:05:33.300] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:05:33.300] /dev/mem opened. [2025-09-23 21:05:33.300] Memory mapped at address 0xffff8d09c000. [2025-09-23 21:05:33.300] Read at address 0x00600018 (0xffff8d09c018): 0x00000000 [2025-09-23 21:05:33.300] Write at address 0x00600018 (0xffff8d09c018): 0x00400040, readback 0x00400040 [2025-09-23 21:05:33.524] Loaded PowerVR consumer services. [2025-09-23 21:05:33.540] Waiting data available... [2025-09-23 21:05:33.572] 512+0 records in [2025-09-23 21:05:33.572] 512+0 records out [2025-09-23 21:05:33.588] Starting syslogd/klogd: done [2025-09-23 21:05:33.620] DML Start [2025-09-23 21:05:33.795] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:05:33.988] DML res1: 0 [2025-09-23 21:05:34.458] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:05:34.458] Read Success [2025-09-23 21:05:34.458] Verifying certificate... [2025-09-23 21:05:34.714] Verified OK [2025-09-23 21:05:34.730] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:05:36.313] Verified OK [2025-09-23 21:05:36.334] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:05:36.910] Verified OK [2025-09-23 21:05:36.910] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:05:39.628] fs.protected_hardlinks = 1 [2025-09-23 21:05:39.644] fs.protected_symlinks = 1 [2025-09-23 21:05:39.644] kernel.modules_disabled = 1 [2025-09-23 21:05:39.837] [2025-09-23 21:05:39.837] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:05:41.092] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:05:48.829] SBL1:1210.0.1.0 [2025-09-23 21:05:48.877] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:05:50.444] SBL2:1210.0.1.0 [2025-09-23 21:05:50.492] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:05:50.603] j-A [2025-09-23 21:05:57.941] The R5 Autosar Classic is running [2025-09-23 21:05:57.966] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:05:57.966] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:05:58.590] INIT: version 2.96 booting [2025-09-23 21:05:58.686] INIT: Entering runlevel: 5 [2025-09-23 21:05:58.846] mtd24 attached [2025-09-23 21:05:58.862] mtd32 attached [2025-09-23 21:05:58.894] ubi0:textures is mounted. [2025-09-23 21:05:58.894] mtd28 attached [2025-09-23 21:05:58.910] ubi1:dml_code is mounted. [2025-09-23 21:05:58.926] RTNETLINK answers: File exists [2025-09-23 21:05:58.983] ubi2:animations is mounted. [2025-09-23 21:05:58.983] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:05:58.983] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:05:58.983] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:05:58.983] data.LB_FadeInType0=100 [2025-09-23 21:05:58.983] data.CHLH_FadeInType0=0 [2025-09-23 21:05:58.983] data.WU_FadeInDelay=0 [2025-09-23 21:05:58.983] max_time_out=0 [2025-09-23 21:05:58.983] No splash screen [2025-09-23 21:05:58.983] stop dss Done [2025-09-23 21:05:58.983] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:05:58.983] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:05:59.014] /dev/mem opened. [2025-09-23 21:05:59.046] Memory mapped at address 0xffffbe65e000. [2025-09-23 21:05:59.046] Read at address 0x00600018 (0xffffbe65e018): 0x00000000 [2025-09-23 21:05:59.046] Write at address 0x00600018 (0xffffbe65e018): 0x00400040, readback 0x00400040 [2025-09-23 21:05:59.078] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:05:59.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:05:59.190] Loaded PowerVR consumer services. [2025-09-23 21:05:59.318] Waiting data available... [2025-09-23 21:05:59.334] 512+0 records in [2025-09-23 21:05:59.334] 512+0 records out [2025-09-23 21:05:59.365] Starting syslogd/klogd: done [2025-09-23 21:05:59.381] DML Start [2025-09-23 21:05:59.558] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:05:59.782] DML res1: 0 [2025-09-23 21:06:00.213] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:06:00.234] Read Success [2025-09-23 21:06:00.234] Verifying certificate... [2025-09-23 21:06:00.474] Verified OK [2025-09-23 21:06:00.506] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:06:02.265] Verified OK [2025-09-23 21:06:02.265] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:06:02.917] Verified OK [2025-09-23 21:06:02.917] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:06:05.571] fs.protected_hardlinks = 1 [2025-09-23 21:06:05.587] fs.protected_symlinks = 1 [2025-09-23 21:06:05.587] kernel.modules_disabled = 1 [2025-09-23 21:06:05.779] [2025-09-23 21:06:05.779] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:06:06.839] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:06:14.595] SBL1:1210.0.1.0 [2025-09-23 21:06:14.643] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:06:16.210] SBL2:1210.0.1.0 [2025-09-23 21:06:16.258] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:06:16.371] j-A [2025-09-23 21:06:23.708] The R5 Autosar Classic is running [2025-09-23 21:06:23.739] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:06:23.739] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:06:24.347] INIT: version 2.96 booting [2025-09-23 21:06:24.458] INIT: Entering runlevel: 5 [2025-09-23 21:06:24.602] mtd24 attached [2025-09-23 21:06:24.618] mtd28 attached [2025-09-23 21:06:24.651] mtd32 attached [2025-09-23 21:06:24.667] ubi0:textures is mounted. [2025-09-23 21:06:24.741] ubi1:animations is mounted. [2025-09-23 21:06:24.741] RTNETLINK answers: File exists [2025-09-23 21:06:24.741] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:06:24.741] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:06:24.741] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:06:24.741] ubi2:dml_code is mounted. [2025-09-23 21:06:24.741] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:06:24.741] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:06:24.741] data.LB_FadeInType0=100 [2025-09-23 21:06:24.741] data.CHLH_FadeInType0=0 [2025-09-23 21:06:24.741] data.WU_FadeInDelay=0 [2025-09-23 21:06:24.741] max_time_out=0 [2025-09-23 21:06:24.741] No splash screen [2025-09-23 21:06:24.741] stop dss Done [2025-09-23 21:06:24.756] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:06:24.772] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:06:24.788] /dev/mem opened. [2025-09-23 21:06:24.788] Memory mapped at address 0xffff80fd5000. [2025-09-23 21:06:24.814] Read at address 0x00600018 (0xffff80fd5018): 0x00000000 [2025-09-23 21:06:24.814] Write at address 0x00600018 (0xffff80fd5018): 0x00400040, readback 0x00400040 [2025-09-23 21:06:25.006] Loaded PowerVR consumer services. [2025-09-23 21:06:25.102] Waiting data available... [2025-09-23 21:06:25.118] 512+0 records in [2025-09-23 21:06:25.118] 512+0 records out [2025-09-23 21:06:25.134] Starting syslogd/klogd: done [2025-09-23 21:06:25.166] DML Start [2025-09-23 21:06:25.342] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:06:25.517] DML res1: 0 [2025-09-23 21:06:25.997] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:06:26.018] Read Success [2025-09-23 21:06:26.018] Verifying certificate... [2025-09-23 21:06:26.242] Verified OK [2025-09-23 21:06:26.274] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:06:28.012] Verified OK [2025-09-23 21:06:28.012] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:06:28.599] Verified OK [2025-09-23 21:06:28.599] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:06:31.126] fs.protected_hardlinks = 1 [2025-09-23 21:06:31.141] fs.protected_symlinks = 1 [2025-09-23 21:06:31.141] kernel.modules_disabled = 1 [2025-09-23 21:06:31.333] [2025-09-23 21:06:31.333] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:06:32.624] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:06:40.400] SBL1:1210.0.1.0 [2025-09-23 21:06:40.432] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:06:42.015] SBL2:1210.0.1.0 [2025-09-23 21:06:42.047] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:06:42.159] j-A [2025-09-23 21:06:49.529] The R5 Autosar Classic is running [2025-09-23 21:06:49.529] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:06:49.529] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:06:50.137] INIT: version 2.96 booting [2025-09-23 21:06:50.248] INIT: Entering runlevel: 5 [2025-09-23 21:06:50.409] mtd28 attached [2025-09-23 21:06:50.409] mtd32 attached [2025-09-23 21:06:50.425] mtd24 attached [2025-09-23 21:06:50.472] ubi0:animations is mounted. [2025-09-23 21:06:50.472] RTNETLINK answers: File exists [2025-09-23 21:06:50.505] ubi2:textures is mounted. [2025-09-23 21:06:50.505] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:06:50.505] ubi1:dml_code is mounted. [2025-09-23 21:06:50.505] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:06:50.505] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:06:50.505] data.LB_FadeInType0=100 [2025-09-23 21:06:50.542] data.CHLH_FadeInType0=0 [2025-09-23 21:06:50.542] data.WU_FadeInDelay=0 [2025-09-23 21:06:50.542] max_time_out=0 [2025-09-23 21:06:50.542] No splash screen [2025-09-23 21:06:50.542] stop dss Done [2025-09-23 21:06:50.542] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:06:50.542] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:06:50.574] /dev/mem opened. [2025-09-23 21:06:50.606] Memory mapped at address 0xffff93742000. [2025-09-23 21:06:50.606] Read at address 0x00600018 (0xffff93742018): 0x00000000 [2025-09-23 21:06:50.606] Write at address 0x00600018 (0xffff93742018): 0x00400040, readback 0x00400040 [2025-09-23 21:06:50.635] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:06:50.635] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:06:50.716] Loaded PowerVR consumer services. [2025-09-23 21:06:50.859] Waiting data available... [2025-09-23 21:06:50.875] 512+0 records in [2025-09-23 21:06:50.875] 512+0 records out [2025-09-23 21:06:50.907] Starting syslogd/klogd: done [2025-09-23 21:06:50.923] DML Start [2025-09-23 21:06:51.099] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:06:51.323] DML res1: 0 [2025-09-23 21:06:51.797] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:06:51.797] Read Success [2025-09-23 21:06:51.797] Verifying certificate... [2025-09-23 21:06:52.085] Verified OK [2025-09-23 21:06:52.117] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:06:53.741] Verified OK [2025-09-23 21:06:53.741] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:06:54.374] Verified OK [2025-09-23 21:06:54.374] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:06:56.996] fs.protected_hardlinks = 1 [2025-09-23 21:06:56.996] fs.protected_symlinks = 1 [2025-09-23 21:06:56.996] kernel.modules_disabled = 1 [2025-09-23 21:06:57.187] [2025-09-23 21:06:57.187] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:06:58.349] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:07:06.150] SBL1:1210.0.1.0 [2025-09-23 21:07:06.182] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:07:07.764] SBL2:1210.0.1.0 [2025-09-23 21:07:07.796] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:07:07.908] j-A [2025-09-23 21:07:15.284] The R5 Autosar Classic is running [2025-09-23 21:07:15.284] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:07:15.284] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:07:15.891] INIT: version 2.96 booting [2025-09-23 21:07:16.004] INIT: Entering runlevel: 5 [2025-09-23 21:07:16.163] mtd24 attached [2025-09-23 21:07:16.179] mtd28 attached [2025-09-23 21:07:16.195] mtd32 attached [2025-09-23 21:07:16.227] ubi0:textures is mounted. [2025-09-23 21:07:16.279] RTNETLINK answers: File exists [2025-09-23 21:07:16.279] ubi1:animations is mounted. [2025-09-23 21:07:16.279] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:07:16.279] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:07:16.279] ubi2:dml_code is mounted. [2025-09-23 21:07:16.279] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:07:16.279] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:07:16.279] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:07:16.279] data.LB_FadeInType0=100 [2025-09-23 21:07:16.300] data.CHLH_FadeInType0=0 [2025-09-23 21:07:16.300] data.WU_FadeInDelay=0 [2025-09-23 21:07:16.300] max_time_out=0 [2025-09-23 21:07:16.300] No splash screen [2025-09-23 21:07:16.300] stop dss Done [2025-09-23 21:07:16.316] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:07:16.332] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:07:16.369] /dev/mem opened. [2025-09-23 21:07:16.369] Memory mapped at address 0xffff9d6ff000. [2025-09-23 21:07:16.369] Read at address 0x00600018 (0xffff9d6ff018): 0x00000000 [2025-09-23 21:07:16.369] Write at address 0x00600018 (0xffff9d6ff018): 0x00400040, readback 0x00400040 [2025-09-23 21:07:16.481] Loaded PowerVR consumer services. [2025-09-23 21:07:16.650] Waiting data available... [2025-09-23 21:07:16.650] 512+0 records in [2025-09-23 21:07:16.650] 512+0 records out [2025-09-23 21:07:16.665] Starting syslogd/klogd: done [2025-09-23 21:07:16.681] DML Start [2025-09-23 21:07:16.841] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:07:17.082] DML res1: 0 [2025-09-23 21:07:17.455] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:07:17.455] Read Success [2025-09-23 21:07:17.455] Verifying certificate... [2025-09-23 21:07:17.678] Verified OK [2025-09-23 21:07:17.694] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:07:19.245] Verified OK [2025-09-23 21:07:19.261] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:07:19.852] Verified OK [2025-09-23 21:07:19.852] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:07:22.587] fs.protected_hardlinks = 1 [2025-09-23 21:07:22.603] fs.protected_symlinks = 1 [2025-09-23 21:07:22.603] kernel.modules_disabled = 1 [2025-09-23 21:07:22.794] [2025-09-23 21:07:22.794] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:07:24.130] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:07:31.912] SBL1:1210.0.1.0 [2025-09-23 21:07:31.960] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:07:33.528] SBL2:1210.0.1.0 [2025-09-23 21:07:33.575] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:07:33.672] j-A [2025-09-23 21:07:41.027] The R5 Autosar Classic is running [2025-09-23 21:07:41.048] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:07:41.048] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:07:41.655] INIT: version 2.96 booting [2025-09-23 21:07:41.768] INIT: Entering runlevel: 5 [2025-09-23 21:07:41.927] mtd24 attached [2025-09-23 21:07:41.943] mtd32 attached [2025-09-23 21:07:41.943] mtd28 attached [2025-09-23 21:07:41.991] RTNETLINK answers: File exists [2025-09-23 21:07:42.038] ubi0:textures is mounted. [2025-09-23 21:07:42.038] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:07:42.038] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:07:42.038] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:07:42.038] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:07:42.038] ubi2:animations is mounted. [2025-09-23 21:07:42.038] ubi1:dml_code is mounted. [2025-09-23 21:07:42.038] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:07:42.070] data.LB_FadeInType0=100 [2025-09-23 21:07:42.070] data.CHLH_FadeInType0=0 [2025-09-23 21:07:42.070] data.WU_FadeInDelay=0 [2025-09-23 21:07:42.070] max_time_out=0 [2025-09-23 21:07:42.070] No splash screen [2025-09-23 21:07:42.070] stop dss Done [2025-09-23 21:07:42.085] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:07:42.102] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:07:42.118] /dev/mem opened. [2025-09-23 21:07:42.118] Memory mapped at address 0xffff8cc0e000. [2025-09-23 21:07:42.143] Read at address 0x00600018 (0xffff8cc0e018): 0x00000000 [2025-09-23 21:07:42.143] Write at address 0x00600018 (0xffff8cc0e018): 0x00400040, readback 0x00400040 [2025-09-23 21:07:42.287] Loaded PowerVR consumer services. [2025-09-23 21:07:42.399] Waiting data available... [2025-09-23 21:07:42.415] 512+0 records in [2025-09-23 21:07:42.415] 512+0 records out [2025-09-23 21:07:42.447] Starting syslogd/klogd: done [2025-09-23 21:07:42.463] DML Start [2025-09-23 21:07:42.654] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:07:42.879] DML res1: 0 [2025-09-23 21:07:43.274] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:07:43.274] Read Success [2025-09-23 21:07:43.274] Verifying certificate... [2025-09-23 21:07:43.498] Verified OK [2025-09-23 21:07:43.514] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:07:45.193] Verified OK [2025-09-23 21:07:45.193] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:07:45.892] Verified OK [2025-09-23 21:07:45.892] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:07:48.592] fs.protected_hardlinks = 1 [2025-09-23 21:07:48.592] fs.protected_symlinks = 1 [2025-09-23 21:07:48.592] kernel.modules_disabled = 1 [2025-09-23 21:07:48.783] [2025-09-23 21:07:48.783] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:07:49.950] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:07:57.695] SBL1:1210.0.1.0 [2025-09-23 21:07:57.727] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:07:59.310] SBL2:1210.0.1.0 [2025-09-23 21:07:59.341] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:07:59.454] j-A [2025-09-23 21:08:06.831] The R5 Autosar Classic is running [2025-09-23 21:08:06.831] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:08:06.831] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:08:07.439] INIT: version 2.96 booting [2025-09-23 21:08:07.550] INIT: Entering runlevel: 5 [2025-09-23 21:08:07.695] mtd24 attached [2025-09-23 21:08:07.710] mtd28 attached [2025-09-23 21:08:07.726] mtd32 attached [2025-09-23 21:08:07.774] ubi0:textures is mounted. [2025-09-23 21:08:07.774] RTNETLINK answers: File exists [2025-09-23 21:08:07.834] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:08:07.834] ubi1:animations is mounted. [2025-09-23 21:08:07.834] ubi2:dml_code is mounted. [2025-09-23 21:08:07.834] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:08:07.834] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:08:07.834] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:08:07.834] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:08:07.834] data.LB_FadeInType0=100 [2025-09-23 21:08:07.834] data.CHLH_FadeInType0=0 [2025-09-23 21:08:07.834] data.WU_FadeInDelay=0 [2025-09-23 21:08:07.834] max_time_out=0 [2025-09-23 21:08:07.834] No splash screen [2025-09-23 21:08:07.834] stop dss Done [2025-09-23 21:08:07.866] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:08:07.866] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:08:07.906] /dev/mem opened. [2025-09-23 21:08:07.906] Memory mapped at address 0xffffad4b0000. [2025-09-23 21:08:07.906] Read at address 0x00600018 (0xffffad4b0018): 0x00000000 [2025-09-23 21:08:07.906] Write at address 0x00600018 (0xffffad4b0018): 0x00400040, readback 0x00400040 [2025-09-23 21:08:08.002] Loaded PowerVR consumer services. [2025-09-23 21:08:08.162] Waiting data available... [2025-09-23 21:08:08.178] 512+0 records in [2025-09-23 21:08:08.178] 512+0 records out [2025-09-23 21:08:08.193] Starting syslogd/klogd: done [2025-09-23 21:08:08.225] DML Start [2025-09-23 21:08:08.418] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:08:08.641] DML res1: 0 [2025-09-23 21:08:09.105] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:08:09.105] Read Success [2025-09-23 21:08:09.121] Verifying certificate... [2025-09-23 21:08:09.377] Verified OK [2025-09-23 21:08:09.393] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:08:11.072] Verified OK [2025-09-23 21:08:11.072] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:08:11.678] Verified OK [2025-09-23 21:08:11.695] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:08:14.301] fs.protected_hardlinks = 1 [2025-09-23 21:08:14.317] fs.protected_symlinks = 1 [2025-09-23 21:08:14.317] kernel.modules_disabled = 1 [2025-09-23 21:08:14.525] [2025-09-23 21:08:14.525] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:08:15.688] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:08:23.463] SBL1:1210.0.1.0 [2025-09-23 21:08:23.495] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:08:25.077] SBL2:1210.0.1.0 [2025-09-23 21:08:25.109] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:08:25.222] j-A [2025-09-23 21:08:32.597] The R5 Autosar Classic is running [2025-09-23 21:08:32.597] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:08:32.597] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:08:33.205] INIT: version 2.96 booting [2025-09-23 21:08:33.317] INIT: Entering runlevel: 5 [2025-09-23 21:08:33.460] mtd24 attached [2025-09-23 21:08:33.476] mtd32 attached [2025-09-23 21:08:33.476] mtd28 attached [2025-09-23 21:08:33.524] ubi0:textures is mounted. [2025-09-23 21:08:33.541] RTNETLINK answers: File exists [2025-09-23 21:08:33.595] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:08:33.595] ubi2:animations is mounted. [2025-09-23 21:08:33.595] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:08:33.595] ubi1:dml_code is mounted. [2025-09-23 21:08:33.595] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:08:33.595] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:08:33.595] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:08:33.595] data.LB_FadeInType0=100 [2025-09-23 21:08:33.595] data.CHLH_FadeInType0=0 [2025-09-23 21:08:33.595] data.WU_FadeInDelay=0 [2025-09-23 21:08:33.595] max_time_out=0 [2025-09-23 21:08:33.595] No splash screen [2025-09-23 21:08:33.595] stop dss Done [2025-09-23 21:08:33.626] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:08:33.659] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:08:33.659] /dev/mem opened. [2025-09-23 21:08:33.659] Memory mapped at address 0xffff96517000. [2025-09-23 21:08:33.659] Read at address 0x00600018 (0xffff96517018): 0x00000000 [2025-09-23 21:08:33.659] Write at address 0x00600018 (0xffff96517018): 0x00400040, readback 0x00400040 [2025-09-23 21:08:33.804] Loaded PowerVR consumer services. [2025-09-23 21:08:33.945] Waiting data available... [2025-09-23 21:08:33.945] 512+0 records in [2025-09-23 21:08:33.945] 512+0 records out [2025-09-23 21:08:33.977] Starting syslogd/klogd: done [2025-09-23 21:08:33.993] DML Start [2025-09-23 21:08:34.169] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:08:34.376] DML res1: 0 [2025-09-23 21:08:34.808] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:08:34.829] Read Success [2025-09-23 21:08:34.829] Verifying certificate... [2025-09-23 21:08:35.117] Verified OK [2025-09-23 21:08:35.133] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:08:36.822] Verified OK [2025-09-23 21:08:36.822] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:08:37.469] Verified OK [2025-09-23 21:08:37.469] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:08:40.059] fs.protected_hardlinks = 1 [2025-09-23 21:08:40.075] fs.protected_symlinks = 1 [2025-09-23 21:08:40.075] kernel.modules_disabled = 1 [2025-09-23 21:08:40.267] [2025-09-23 21:08:40.267] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:08:41.433] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:08:49.236] SBL1:1210.0.1.0 [2025-09-23 21:08:49.285] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:08:50.850] SBL2:1210.0.1.0 [2025-09-23 21:08:50.899] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 21:08:51.011] j-A [2025-09-23 21:08:58.350] The R5 Autosar Classic is running [2025-09-23 21:08:58.375] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:08:58.375] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:08:58.983] INIT: version 2.96 booting [2025-09-23 21:08:59.095] INIT: Entering runlevel: 5 [2025-09-23 21:08:59.239] mtd24 attached [2025-09-23 21:08:59.255] mtd28 attached [2025-09-23 21:08:59.271] mtd32 attached [2025-09-23 21:08:59.350] ubi0:textures is mounted. [2025-09-23 21:08:59.350] RTNETLINK answers: File exists [2025-09-23 21:08:59.350] ubi1:animations is mounted. [2025-09-23 21:08:59.350] ubi2:dml_code is mounted. [2025-09-23 21:08:59.350] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:08:59.350] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:08:59.350] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:08:59.350] data.LB_FadeInType0=100 [2025-09-23 21:08:59.376] data.CHLH_FadeInType0=0 [2025-09-23 21:08:59.376] data.WU_FadeInDelay=0 [2025-09-23 21:08:59.376] max_time_out=0 [2025-09-23 21:08:59.376] No splash screen [2025-09-23 21:08:59.376] stop dss Done [2025-09-23 21:08:59.376] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:08:59.376] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:08:59.445] /dev/mem opened. [2025-09-23 21:08:59.445] Memory mapped at address 0xffffb4b86000. [2025-09-23 21:08:59.445] Read at address 0x00600018 (0xffffb4b86018): 0x00000000 [2025-09-23 21:08:59.445] Write at address 0x00600018 (0xffffb4b86018): 0x00400040, readback 0x00400040 [2025-09-23 21:08:59.493] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:08:59.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:08:59.556] Loaded PowerVR consumer services. [2025-09-23 21:08:59.730] Waiting data available... [2025-09-23 21:08:59.730] 512+0 records in [2025-09-23 21:08:59.730] 512+0 records out [2025-09-23 21:08:59.763] Starting syslogd/klogd: done [2025-09-23 21:08:59.779] DML Start [2025-09-23 21:08:59.939] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:09:00.178] DML res1: 0 [2025-09-23 21:09:00.654] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:09:00.654] Read Success [2025-09-23 21:09:00.654] Verifying certificate... [2025-09-23 21:09:00.974] Verified OK [2025-09-23 21:09:00.990] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:09:02.684] Verified OK [2025-09-23 21:09:02.684] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:09:03.260] Verified OK [2025-09-23 21:09:03.281] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:09:05.808] fs.protected_hardlinks = 1 [2025-09-23 21:09:05.808] fs.protected_symlinks = 1 [2025-09-23 21:09:05.824] kernel.modules_disabled = 1 [2025-09-23 21:09:06.016] [2025-09-23 21:09:06.016] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:09:07.272] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:09:15.011] SBL1:1210.0.1.0 [2025-09-23 21:09:15.059] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:09:16.626] SBL2:1210.0.1.0 [2025-09-23 21:09:16.674] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:09:16.770] j-A [2025-09-23 21:09:24.125] The R5 Autosar Classic is running [2025-09-23 21:09:24.147] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:09:24.147] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:09:24.755] INIT: version 2.96 booting [2025-09-23 21:09:24.866] INIT: Entering runlevel: 5 [2025-09-23 21:09:25.026] mtd32 attached [2025-09-23 21:09:25.026] mtd28 attached [2025-09-23 21:09:25.041] mtd24 attached [2025-09-23 21:09:25.149] RTNETLINK answers: File exists [2025-09-23 21:09:25.149] ubi1:animations is mounted. [2025-09-23 21:09:25.149] ubi0:dml_code is mounted. [2025-09-23 21:09:25.149] ubi2:textures is mounted. [2025-09-23 21:09:25.149] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:09:25.149] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:09:25.149] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:09:25.149] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:09:25.149] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:09:25.149] data.LB_FadeInType0=100 [2025-09-23 21:09:25.149] data.CHLH_FadeInType0=0 [2025-09-23 21:09:25.149] data.WU_FadeInDelay=0 [2025-09-23 21:09:25.149] max_time_out=0 [2025-09-23 21:09:25.149] No splash screen [2025-09-23 21:09:25.149] stop dss Done [2025-09-23 21:09:25.222] /dev/mem opened. [2025-09-23 21:09:25.222] Memory mapped at address 0xffff8046e000. [2025-09-23 21:09:25.222] Read at address 0x00600018 (0xffff8046e018): 0x00000000 [2025-09-23 21:09:25.222] Write at address 0x00600018 (0xffff8046e018): 0x00400040, readback 0x00400040 [2025-09-23 21:09:25.254] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:09:25.270] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:09:25.446] Loaded PowerVR consumer services. [2025-09-23 21:09:25.510] Waiting data available... [2025-09-23 21:09:25.526] 512+0 records in [2025-09-23 21:09:25.526] 512+0 records out [2025-09-23 21:09:25.574] Starting syslogd/klogd: done [2025-09-23 21:09:25.589] DML Start [2025-09-23 21:09:25.766] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:09:25.957] DML res1: 0 [2025-09-23 21:09:26.454] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:09:26.474] Read Success [2025-09-23 21:09:26.474] Verifying certificate... [2025-09-23 21:09:26.826] Verified OK [2025-09-23 21:09:26.842] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:09:28.551] Verified OK [2025-09-23 21:09:28.551] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:09:29.078] Verified OK [2025-09-23 21:09:29.094] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:09:31.461] fs.protected_hardlinks = 1 [2025-09-23 21:09:31.461] fs.protected_symlinks = 1 [2025-09-23 21:09:31.477] kernel.modules_disabled = 1 [2025-09-23 21:09:31.669] [2025-09-23 21:09:31.669] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:09:33.053] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:09:40.781] SBL1:1210.0.1.0 [2025-09-23 21:09:40.829] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:09:42.395] SBL2:1210.0.1.0 [2025-09-23 21:09:42.427] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:09:42.539] j-A [2025-09-23 21:09:49.913] The R5 Autosar Classic is running [2025-09-23 21:09:49.913] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:09:49.913] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:09:50.520] INIT: version 2.96 booting [2025-09-23 21:09:50.616] INIT: Entering runlevel: 5 [2025-09-23 21:09:50.792] mtd28 attached [2025-09-23 21:09:50.792] mtd24 attached [2025-09-23 21:09:50.824] ubi0:animations is mounted. [2025-09-23 21:09:50.824] mtd32 attached [2025-09-23 21:09:50.840] ubi1:textures is mounted. [2025-09-23 21:09:50.911] RTNETLINK answers: File exists [2025-09-23 21:09:50.911] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:09:50.911] ubi2:dml_code is mounted. [2025-09-23 21:09:50.911] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:09:50.911] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:09:50.911] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:09:50.911] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:09:50.911] data.LB_FadeInType0=100 [2025-09-23 21:09:50.911] data.CHLH_FadeInType0=0 [2025-09-23 21:09:50.911] data.WU_FadeInDelay=0 [2025-09-23 21:09:50.911] max_time_out=0 [2025-09-23 21:09:50.911] No splash screen [2025-09-23 21:09:50.911] stop dss Done [2025-09-23 21:09:50.959] /dev/mem opened. [2025-09-23 21:09:50.991] Memory mapped at address 0xffff99719000. [2025-09-23 21:09:50.991] Read at address 0x00600018 (0xffff99719018): 0x00000000 [2025-09-23 21:09:50.991] Write at address 0x00600018 (0xffff99719018): 0x00400040, readback 0x00400040 [2025-09-23 21:09:51.007] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:09:51.023] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:09:51.231] Loaded PowerVR consumer services. [2025-09-23 21:09:51.279] 512+0 records in [2025-09-23 21:09:51.279] 512+0 records out [2025-09-23 21:09:51.279] Waiting data available... [2025-09-23 21:09:51.311] Starting syslogd/klogd: done [2025-09-23 21:09:51.327] DML Start [2025-09-23 21:09:51.519] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:09:51.727] DML res1: 0 [2025-09-23 21:09:52.156] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:09:52.156] Read Success [2025-09-23 21:09:52.156] Verifying certificate... [2025-09-23 21:09:52.379] Verified OK [2025-09-23 21:09:52.395] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:09:54.104] Verified OK [2025-09-23 21:09:54.104] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:09:54.711] Verified OK [2025-09-23 21:09:54.711] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:09:57.349] fs.protected_hardlinks = 1 [2025-09-23 21:09:57.365] fs.protected_symlinks = 1 [2025-09-23 21:09:57.365] kernel.modules_disabled = 1 [2025-09-23 21:09:57.574] [2025-09-23 21:09:57.574] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:09:58.764] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:10:06.549] SBL1:1210.0.1.0 [2025-09-23 21:10:06.597] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:10:08.165] SBL2:1210.0.1.0 [2025-09-23 21:10:08.213] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:10:08.308] j-A [2025-09-23 21:10:15.662] The R5 Autosar Classic is running [2025-09-23 21:10:15.687] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:10:15.687] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:10:16.294] INIT: version 2.96 booting [2025-09-23 21:10:16.407] INIT: Entering runlevel: 5 [2025-09-23 21:10:16.566] mtd24 attached [2025-09-23 21:10:16.566] mtd28 attached [2025-09-23 21:10:16.582] mtd32 attached [2025-09-23 21:10:16.672] ubi1:animations is mounted. [2025-09-23 21:10:16.672] RTNETLINK answers: File exists [2025-09-23 21:10:16.672] ubi0:textures is mounted. [2025-09-23 21:10:16.672] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:10:16.672] ubi2:dml_code is mounted. [2025-09-23 21:10:16.672] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:10:16.672] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:10:16.672] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:10:16.672] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:10:16.694] data.LB_FadeInType0=100 [2025-09-23 21:10:16.694] data.CHLH_FadeInType0=0 [2025-09-23 21:10:16.694] data.WU_FadeInDelay=0 [2025-09-23 21:10:16.694] max_time_out=0 [2025-09-23 21:10:16.694] No splash screen [2025-09-23 21:10:16.694] stop dss Done [2025-09-23 21:10:16.770] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:10:16.770] /dev/mem opened. [2025-09-23 21:10:16.770] Memory mapped at address 0xffff945c4000. [2025-09-23 21:10:16.770] Read at address 0x00600018 (0xffff945c4018): 0x00000000 [2025-09-23 21:10:16.770] Write at address 0x00600018 (0xffff945c4018): 0x00400040, readback 0x00400040 [2025-09-23 21:10:16.770] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:10:16.881] Loaded PowerVR consumer services. [2025-09-23 21:10:17.026] Waiting data available... [2025-09-23 21:10:17.042] 512+0 records in [2025-09-23 21:10:17.042] 512+0 records out [2025-09-23 21:10:17.089] Starting syslogd/klogd: done [2025-09-23 21:10:17.105] DML Start [2025-09-23 21:10:17.249] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:10:17.521] DML res1: 0 [2025-09-23 21:10:17.915] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:10:17.915] Read Success [2025-09-23 21:10:17.915] Verifying certificate... [2025-09-23 21:10:18.155] Verified OK [2025-09-23 21:10:18.155] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:10:19.798] Verified OK [2025-09-23 21:10:19.798] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:10:20.420] Verified OK [2025-09-23 21:10:20.420] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:10:23.218] fs.protected_hardlinks = 1 [2025-09-23 21:10:23.250] fs.protected_symlinks = 1 [2025-09-23 21:10:23.250] kernel.modules_disabled = 1 [2025-09-23 21:10:23.441] [2025-09-23 21:10:23.441] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:10:24.576] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:10:32.337] SBL1:1210.0.1.0 [2025-09-23 21:10:32.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:10:33.952] SBL2:1210.0.1.0 [2025-09-23 21:10:33.984] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:10:34.096] j-A [2025-09-23 21:10:41.449] The R5 Autosar Classic is running [2025-09-23 21:10:41.449] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:10:41.470] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:10:42.078] INIT: version 2.96 booting [2025-09-23 21:10:42.190] INIT: Entering runlevel: 5 [2025-09-23 21:10:42.350] mtd28 attached [2025-09-23 21:10:42.350] mtd24 attached [2025-09-23 21:10:42.382] mtd32 attached [2025-09-23 21:10:42.398] ubi0:animations is mounted. [2025-09-23 21:10:42.414] RTNETLINK answers: File exists [2025-09-23 21:10:42.414] ubi1:textures is mounted. [2025-09-23 21:10:42.472] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:10:42.472] ubi2:dml_code is mounted. [2025-09-23 21:10:42.472] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:10:42.472] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:10:42.472] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:10:42.472] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:10:42.472] data.LB_FadeInType0=100 [2025-09-23 21:10:42.472] data.CHLH_FadeInType0=0 [2025-09-23 21:10:42.472] data.WU_FadeInDelay=0 [2025-09-23 21:10:42.472] max_time_out=0 [2025-09-23 21:10:42.472] No splash screen [2025-09-23 21:10:42.472] stop dss Done [2025-09-23 21:10:42.520] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:10:42.561] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:10:42.561] /dev/mem opened. [2025-09-23 21:10:42.561] Memory mapped at address 0xffffb6355000. [2025-09-23 21:10:42.561] Read at address 0x00600018 (0xffffb6355018): 0x00000000 [2025-09-23 21:10:42.561] Write at address 0x00600018 (0xffffb6355018): 0x00400040, readback 0x00400040 [2025-09-23 21:10:42.786] Loaded PowerVR consumer services. [2025-09-23 21:10:42.860] Waiting data available... [2025-09-23 21:10:42.860] 512+0 records in [2025-09-23 21:10:42.860] 512+0 records out [2025-09-23 21:10:42.875] Starting syslogd/klogd: done [2025-09-23 21:10:42.891] DML Start [2025-09-23 21:10:43.067] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:10:43.355] DML res1: 0 [2025-09-23 21:10:43.707] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:10:43.728] Read Success [2025-09-23 21:10:43.728] Verifying certificate... [2025-09-23 21:10:44.000] Verified OK [2025-09-23 21:10:44.015] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:10:45.788] Verified OK [2025-09-23 21:10:45.788] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:10:46.332] Verified OK [2025-09-23 21:10:46.332] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:10:48.763] fs.protected_hardlinks = 1 [2025-09-23 21:10:48.778] fs.protected_symlinks = 1 [2025-09-23 21:10:48.778] kernel.modules_disabled = 1 [2025-09-23 21:10:49.018] [2025-09-23 21:10:49.018] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:10:50.393] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:10:58.134] SBL1:1210.0.1.0 [2025-09-23 21:10:58.166] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:10:59.749] SBL2:1210.0.1.0 [2025-09-23 21:10:59.780] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:10:59.893] j-A [2025-09-23 21:11:07.267] The R5 Autosar Classic is running [2025-09-23 21:11:07.267] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:11:07.267] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:11:07.875] INIT: version 2.96 booting [2025-09-23 21:11:07.986] INIT: Entering runlevel: 5 [2025-09-23 21:11:08.130] mtd24 attached [2025-09-23 21:11:08.146] mtd28 attached [2025-09-23 21:11:08.162] mtd32 attached [2025-09-23 21:11:08.210] RTNETLINK answers: File exists [2025-09-23 21:11:08.255] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:11:08.255] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:11:08.255] ubi0:textures is mounted. [2025-09-23 21:11:08.255] ubi2:dml_code is mounted. [2025-09-23 21:11:08.255] ubi1:animations is mounted. [2025-09-23 21:11:08.255] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:11:08.255] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:11:08.255] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:11:08.279] data.LB_FadeInType0=100 [2025-09-23 21:11:08.279] data.CHLH_FadeInType0=0 [2025-09-23 21:11:08.279] data.WU_FadeInDelay=0 [2025-09-23 21:11:08.279] max_time_out=0 [2025-09-23 21:11:08.279] No splash screen [2025-09-23 21:11:08.279] stop dss Done [2025-09-23 21:11:08.343] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:11:08.343] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:11:08.343] /dev/mem opened. [2025-09-23 21:11:08.343] Memory mapped at address 0xffff9ce57000. [2025-09-23 21:11:08.343] Read at address 0x00600018 (0xffff9ce57018): 0x00000000 [2025-09-23 21:11:08.343] Write at address 0x00600018 (0xffff9ce57018): 0x00400040, readback 0x00400040 [2025-09-23 21:11:08.504] Loaded PowerVR consumer services. [2025-09-23 21:11:08.616] Waiting data available... [2025-09-23 21:11:08.631] 512+0 records in [2025-09-23 21:11:08.631] 512+0 records out [2025-09-23 21:11:08.679] Starting syslogd/klogd: done [2025-09-23 21:11:08.679] DML Start [2025-09-23 21:11:08.871] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:11:09.095] DML res1: 0 [2025-09-23 21:11:09.495] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:11:09.516] Read Success [2025-09-23 21:11:09.516] Verifying certificate... [2025-09-23 21:11:09.740] Verified OK [2025-09-23 21:11:09.756] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:11:11.529] Verified OK [2025-09-23 21:11:11.529] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:11:12.101] Verified OK [2025-09-23 21:11:12.101] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:11:14.578] fs.protected_hardlinks = 1 [2025-09-23 21:11:14.595] fs.protected_symlinks = 1 [2025-09-23 21:11:14.595] kernel.modules_disabled = 1 [2025-09-23 21:11:14.803] [2025-09-23 21:11:14.803] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:11:16.125] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:11:23.881] SBL1:1210.0.1.0 [2025-09-23 21:11:23.913] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:11:25.495] SBL2:1210.0.1.0 [2025-09-23 21:11:25.527] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:11:25.639] j-A [2025-09-23 21:11:33.014] The R5 Autosar Classic is running [2025-09-23 21:11:33.014] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:11:33.014] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:11:33.621] INIT: version 2.96 booting [2025-09-23 21:11:33.733] INIT: Entering runlevel: 5 [2025-09-23 21:11:33.893] mtd24 attached [2025-09-23 21:11:33.893] mtd28 attached [2025-09-23 21:11:33.909] mtd32 attached [2025-09-23 21:11:33.957] ubi0:textures is mounted. [2025-09-23 21:11:33.957] ubi1:animations is mounted. [2025-09-23 21:11:33.996] RTNETLINK answers: File exists [2025-09-23 21:11:33.996] ubi2:dml_code is mounted. [2025-09-23 21:11:33.996] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:11:33.996] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:11:34.028] data.LB_FadeInType0=100 [2025-09-23 21:11:34.028] data.CHLH_FadeInType0=0 [2025-09-23 21:11:34.028] data.WU_FadeInDelay=0 [2025-09-23 21:11:34.028] max_time_out=0 [2025-09-23 21:11:34.028] No splash screen [2025-09-23 21:11:34.028] stop dss Done [2025-09-23 21:11:34.028] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:11:34.028] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:11:34.028] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:11:34.076] /dev/mem opened. [2025-09-23 21:11:34.076] Memory mapped at address 0xffffa40cc000. [2025-09-23 21:11:34.102] Read at address 0x00600018 (0xffffa40cc018): 0x00000000 [2025-09-23 21:11:34.102] Write at address 0x00600018 (0xffffa40cc018): 0x00400040, readback 0x00400040 [2025-09-23 21:11:34.144] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:11:34.144] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:11:34.223] Loaded PowerVR consumer services. [2025-09-23 21:11:34.352] Waiting data available... [2025-09-23 21:11:34.368] 512+0 records in [2025-09-23 21:11:34.368] 512+0 records out [2025-09-23 21:11:34.383] Starting syslogd/klogd: done [2025-09-23 21:11:34.415] DML Start [2025-09-23 21:11:34.591] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:11:34.815] DML res1: 0 [2025-09-23 21:11:35.255] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:11:35.255] Read Success [2025-09-23 21:11:35.255] Verifying certificate... [2025-09-23 21:11:35.542] Verified OK [2025-09-23 21:11:35.558] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:11:37.281] Verified OK [2025-09-23 21:11:37.281] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:11:37.776] Verified OK [2025-09-23 21:11:37.776] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:11:40.254] fs.protected_hardlinks = 1 [2025-09-23 21:11:40.254] fs.protected_symlinks = 1 [2025-09-23 21:11:40.270] kernel.modules_disabled = 1 [2025-09-23 21:11:40.461] [2025-09-23 21:11:40.461] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:11:41.846] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:11:49.622] SBL1:1210.0.1.0 [2025-09-23 21:11:49.670] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:11:51.238] SBL2:1210.0.1.0 [2025-09-23 21:11:51.285] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:11:51.397] j-A [2025-09-23 21:11:58.738] The R5 Autosar Classic is running [2025-09-23 21:11:58.761] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:11:58.761] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:11:59.369] INIT: version 2.96 booting [2025-09-23 21:11:59.480] INIT: Entering runlevel: 5 [2025-09-23 21:11:59.641] mtd32 attached [2025-09-23 21:11:59.641] mtd28 attached [2025-09-23 21:11:59.657] mtd24 attached [2025-09-23 21:11:59.705] ubi0:dml_code is mounted. [2025-09-23 21:11:59.705] RTNETLINK answers: File exists [2025-09-23 21:11:59.766] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:11:59.766] ubi2:textures is mounted. [2025-09-23 21:11:59.766] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:11:59.766] ubi1:animations is mounted. [2025-09-23 21:11:59.766] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:11:59.766] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:11:59.766] data.LB_FadeInType0=100 [2025-09-23 21:11:59.766] data.CHLH_FadeInType0=0 [2025-09-23 21:11:59.766] data.WU_FadeInDelay=0 [2025-09-23 21:11:59.766] max_time_out=0 [2025-09-23 21:11:59.766] No splash screen [2025-09-23 21:11:59.766] stop dss Done [2025-09-23 21:11:59.766] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:11:59.810] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:11:59.810] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:11:59.810] /dev/mem opened. [2025-09-23 21:11:59.810] Memory mapped at address 0xffff94abf000. [2025-09-23 21:11:59.836] Read at address 0x00600018 (0xffff94abf018): 0x00000000 [2025-09-23 21:11:59.836] Write at address 0x00600018 (0xffff94abf018): 0x00400040, readback 0x00400040 [2025-09-23 21:11:59.981] Loaded PowerVR consumer services. [2025-09-23 21:12:00.108] Waiting data available... [2025-09-23 21:12:00.124] 512+0 records in [2025-09-23 21:12:00.124] 512+0 records out [2025-09-23 21:12:00.156] Starting syslogd/klogd: done [2025-09-23 21:12:00.172] DML Start [2025-09-23 21:12:00.364] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:12:00.604] DML res1: 0 [2025-09-23 21:12:00.972] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:12:00.972] Read Success [2025-09-23 21:12:00.988] Verifying certificate... [2025-09-23 21:12:01.211] Verified OK [2025-09-23 21:12:01.227] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:12:02.896] Verified OK [2025-09-23 21:12:02.896] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:12:03.550] Verified OK [2025-09-23 21:12:03.550] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:12:06.221] fs.protected_hardlinks = 1 [2025-09-23 21:12:06.221] fs.protected_symlinks = 1 [2025-09-23 21:12:06.237] kernel.modules_disabled = 1 [2025-09-23 21:12:06.428] [2025-09-23 21:12:06.428] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:12:07.623] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:12:15.382] SBL1:1210.0.1.0 [2025-09-23 21:12:15.429] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:12:16.997] SBL2:1210.0.1.0 [2025-09-23 21:12:17.045] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:12:17.156] j-A [2025-09-23 21:12:24.497] The R5 Autosar Classic is running [2025-09-23 21:12:24.522] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:12:24.522] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:12:25.130] INIT: version 2.96 booting [2025-09-23 21:12:25.241] INIT: Entering runlevel: 5 [2025-09-23 21:12:25.402] mtd24 attached [2025-09-23 21:12:25.402] mtd28 attached [2025-09-23 21:12:25.417] mtd32 attached [2025-09-23 21:12:25.466] RTNETLINK answers: File exists [2025-09-23 21:12:25.466] ubi0:textures is mounted. [2025-09-23 21:12:25.529] ubi1:animations is mounted. [2025-09-23 21:12:25.529] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:12:25.529] ubi2:dml_code is mounted. [2025-09-23 21:12:25.529] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:12:25.529] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:12:25.529] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:12:25.529] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:12:25.529] data.LB_FadeInType0=100 [2025-09-23 21:12:25.529] data.CHLH_FadeInType0=0 [2025-09-23 21:12:25.529] data.WU_FadeInDelay=0 [2025-09-23 21:12:25.529] max_time_out=0 [2025-09-23 21:12:25.529] No splash screen [2025-09-23 21:12:25.529] stop dss Done [2025-09-23 21:12:25.606] /dev/mem opened. [2025-09-23 21:12:25.606] Memory mapped at address 0xffff9f516000. [2025-09-23 21:12:25.606] Read at address 0x00600018 (0xffff9f516018): 0x00000000 [2025-09-23 21:12:25.606] Write at address 0x00600018 (0xffff9f516018): 0x00400040, readback 0x00400040 [2025-09-23 21:12:25.606] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:12:25.606] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:12:25.750] Loaded PowerVR consumer services. [2025-09-23 21:12:25.862] Waiting data available... [2025-09-23 21:12:25.878] 512+0 records in [2025-09-23 21:12:25.878] 512+0 records out [2025-09-23 21:12:25.926] Starting syslogd/klogd: done [2025-09-23 21:12:25.942] DML Start [2025-09-23 21:12:26.085] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:12:26.262] DML res1: 0 [2025-09-23 21:12:26.789] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:12:26.810] Read Success [2025-09-23 21:12:26.810] Verifying certificate... [2025-09-23 21:12:27.066] Verified OK [2025-09-23 21:12:27.082] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:12:28.777] Verified OK [2025-09-23 21:12:28.777] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:12:29.378] Verified OK [2025-09-23 21:12:29.378] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:12:31.920] fs.protected_hardlinks = 1 [2025-09-23 21:12:31.920] fs.protected_symlinks = 1 [2025-09-23 21:12:31.935] kernel.modules_disabled = 1 [2025-09-23 21:12:32.127] [2025-09-23 21:12:32.127] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:12:33.361] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:12:41.136] SBL1:1210.0.1.0 [2025-09-23 21:12:41.184] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:12:42.752] SBL2:1210.0.1.0 [2025-09-23 21:12:42.799] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 21:12:42.895] j-A [2025-09-23 21:12:50.252] The R5 Autosar Classic is running [2025-09-23 21:12:50.252] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:12:50.273] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:12:50.880] INIT: version 2.96 booting [2025-09-23 21:12:50.992] INIT: Entering runlevel: 5 [2025-09-23 21:12:51.136] mtd28 attached [2025-09-23 21:12:51.152] mtd24 attached [2025-09-23 21:12:51.168] mtd32 attached [2025-09-23 21:12:51.246] RTNETLINK answers: File exists [2025-09-23 21:12:51.246] ubi0:animations is mounted. [2025-09-23 21:12:51.246] ubi1:textures is mounted. [2025-09-23 21:12:51.246] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:12:51.246] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:12:51.246] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:12:51.246] ubi2:dml_code is mounted. [2025-09-23 21:12:51.246] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:12:51.246] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:12:51.276] data.LB_FadeInType0=100 [2025-09-23 21:12:51.276] data.CHLH_FadeInType0=0 [2025-09-23 21:12:51.276] data.WU_FadeInDelay=0 [2025-09-23 21:12:51.276] max_time_out=0 [2025-09-23 21:12:51.276] No splash screen [2025-09-23 21:12:51.276] stop dss Done [2025-09-23 21:12:51.292] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:12:51.292] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:12:51.324] /dev/mem opened. [2025-09-23 21:12:51.324] Memory mapped at address 0xffff8f1bd000. [2025-09-23 21:12:51.350] Read at address 0x00600018 (0xffff8f1bd018): 0x00000000 [2025-09-23 21:12:51.350] Write at address 0x00600018 (0xffff8f1bd018): 0x00400040, readback 0x00400040 [2025-09-23 21:12:51.445] Loaded PowerVR consumer services. [2025-09-23 21:12:51.589] Waiting data available... [2025-09-23 21:12:51.621] 512+0 records in [2025-09-23 21:12:51.621] 512+0 records out [2025-09-23 21:12:51.669] Starting syslogd/klogd: done [2025-09-23 21:12:51.685] DML Start [2025-09-23 21:12:51.893] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:12:52.117] DML res1: 0 [2025-09-23 21:12:52.496] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:12:52.496] Read Success [2025-09-23 21:12:52.496] Verifying certificate... [2025-09-23 21:12:52.720] Verified OK [2025-09-23 21:12:52.735] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:12:54.296] Verified OK [2025-09-23 21:12:54.296] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:12:54.897] Verified OK [2025-09-23 21:12:54.897] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:12:57.679] fs.protected_hardlinks = 1 [2025-09-23 21:12:57.679] fs.protected_symlinks = 1 [2025-09-23 21:12:57.695] kernel.modules_disabled = 1 [2025-09-23 21:12:57.902] [2025-09-23 21:12:57.902] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:12:59.209] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:13:06.873] SBL1:1210.0.1.0 [2025-09-23 21:13:06.905] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:13:08.489] SBL2:1210.0.1.0 [2025-09-23 21:13:08.520] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:13:08.632] j-A [2025-09-23 21:13:15.987] The R5 Autosar Classic is running [2025-09-23 21:13:15.987] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:13:16.008] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:13:16.616] INIT: version 2.96 booting [2025-09-23 21:13:16.729] INIT: Entering runlevel: 5 [2025-09-23 21:13:16.873] mtd24 attached [2025-09-23 21:13:16.888] mtd28 attached [2025-09-23 21:13:16.920] mtd32 attached [2025-09-23 21:13:16.936] ubi0:textures is mounted. [2025-09-23 21:13:16.936] ubi1:animations is mounted. [2025-09-23 21:13:16.987] RTNETLINK answers: File exists [2025-09-23 21:13:16.987] ubi2:dml_code is mounted. [2025-09-23 21:13:16.987] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:13:16.987] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:13:16.987] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:13:16.987] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:13:17.019] data.LB_FadeInType0=100 [2025-09-23 21:13:17.019] data.CHLH_FadeInType0=0 [2025-09-23 21:13:17.019] data.WU_FadeInDelay=0 [2025-09-23 21:13:17.019] max_time_out=0 [2025-09-23 21:13:17.019] No splash screen [2025-09-23 21:13:17.019] stop dss Done [2025-09-23 21:13:17.019] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:13:17.084] /dev/mem opened. [2025-09-23 21:13:17.084] Memory mapped at address 0xffffaecaf000. [2025-09-23 21:13:17.084] Read at address 0x00600018 (0xffffaecaf018): 0x00000000 [2025-09-23 21:13:17.084] Write at address 0x00600018 (0xffffaecaf018): 0x00400040, readback 0x00400040 [2025-09-23 21:13:17.084] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:13:17.084] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:13:17.354] Loaded PowerVR consumer services. [2025-09-23 21:13:17.354] Waiting data available... [2025-09-23 21:13:17.370] 512+0 records in [2025-09-23 21:13:17.370] 512+0 records out [2025-09-23 21:13:17.417] Starting syslogd/klogd: done [2025-09-23 21:13:17.433] DML Start [2025-09-23 21:13:17.610] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:13:17.850] DML res1: 0 [2025-09-23 21:13:18.274] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:13:18.274] Read Success [2025-09-23 21:13:18.274] Verifying certificate... [2025-09-23 21:13:18.546] Verified OK [2025-09-23 21:13:18.561] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:13:20.233] Verified OK [2025-09-23 21:13:20.233] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:13:20.836] Verified OK [2025-09-23 21:13:20.836] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:13:23.379] fs.protected_hardlinks = 1 [2025-09-23 21:13:23.395] fs.protected_symlinks = 1 [2025-09-23 21:13:23.395] kernel.modules_disabled = 1 [2025-09-23 21:13:23.586] [2025-09-23 21:13:23.586] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:13:24.921] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:13:32.643] SBL1:1210.0.1.0 [2025-09-23 21:13:32.691] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:13:34.258] SBL2:1210.0.1.0 [2025-09-23 21:13:34.306] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:13:34.417] j-A [2025-09-23 21:13:41.755] The R5 Autosar Classic is running [2025-09-23 21:13:41.780] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:13:41.780] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:13:42.388] INIT: version 2.96 booting [2025-09-23 21:13:42.516] INIT: Entering runlevel: 5 [2025-09-23 21:13:42.659] mtd28 attached [2025-09-23 21:13:42.675] mtd24 attached [2025-09-23 21:13:42.691] mtd32 attached [2025-09-23 21:13:42.724] RTNETLINK answers: File exists [2025-09-23 21:13:42.770] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:13:42.770] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:13:42.770] ubi0:animations is mounted. [2025-09-23 21:13:42.770] ubi1:textures is mounted. [2025-09-23 21:13:42.770] ubi2:dml_code is mounted. [2025-09-23 21:13:42.770] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:13:42.770] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:13:42.770] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:13:42.793] data.LB_FadeInType0=100 [2025-09-23 21:13:42.793] data.CHLH_FadeInType0=0 [2025-09-23 21:13:42.793] data.WU_FadeInDelay=0 [2025-09-23 21:13:42.793] max_time_out=0 [2025-09-23 21:13:42.793] No splash screen [2025-09-23 21:13:42.793] stop dss Done [2025-09-23 21:13:42.873] /dev/mem opened. [2025-09-23 21:13:42.873] Memory mapped at address 0xffffb4cbd000. [2025-09-23 21:13:42.873] Read at address 0x00600018 (0xffffb4cbd018): 0x00000000 [2025-09-23 21:13:42.873] Write at address 0x00600018 (0xffffb4cbd018): 0x00400040, readback 0x00400040 [2025-09-23 21:13:42.873] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:13:42.873] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:13:43.032] Loaded PowerVR consumer services. [2025-09-23 21:13:43.129] Waiting data available... [2025-09-23 21:13:43.145] 512+0 records in [2025-09-23 21:13:43.145] 512+0 records out [2025-09-23 21:13:43.193] Starting syslogd/klogd: done [2025-09-23 21:13:43.209] DML Start [2025-09-23 21:13:43.416] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:13:43.625] DML res1: 0 [2025-09-23 21:13:44.018] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:13:44.018] Read Success [2025-09-23 21:13:44.018] Verifying certificate... [2025-09-23 21:13:44.258] Verified OK [2025-09-23 21:13:44.290] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:13:45.969] Verified OK [2025-09-23 21:13:45.969] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:13:46.570] Verified OK [2025-09-23 21:13:46.570] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:13:49.269] fs.protected_hardlinks = 1 [2025-09-23 21:13:49.269] fs.protected_symlinks = 1 [2025-09-23 21:13:49.269] kernel.modules_disabled = 1 [2025-09-23 21:13:49.445] [2025-09-23 21:13:49.445] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:13:50.644] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:13:58.380] SBL1:1210.0.1.0 [2025-09-23 21:13:58.428] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:14:00.011] SBL2:1210.0.1.0 [2025-09-23 21:14:00.043] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:14:00.154] j-A [2025-09-23 21:14:07.526] The R5 Autosar Classic is running [2025-09-23 21:14:07.526] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:14:07.526] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:14:08.133] INIT: version 2.96 booting [2025-09-23 21:14:08.246] INIT: Entering runlevel: 5 [2025-09-23 21:14:08.389] mtd28 attached [2025-09-23 21:14:08.405] mtd24 attached [2025-09-23 21:14:08.421] mtd32 attached [2025-09-23 21:14:08.438] ubi0:animations is mounted. [2025-09-23 21:14:08.454] ubi1:textures is mounted. [2025-09-23 21:14:08.470] RTNETLINK answers: File exists [2025-09-23 21:14:08.470] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:14:08.521] ubi2:dml_code is mounted. [2025-09-23 21:14:08.521] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:14:08.521] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:14:08.521] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:14:08.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:14:08.521] data.LB_FadeInType0=100 [2025-09-23 21:14:08.521] data.CHLH_FadeInType0=0 [2025-09-23 21:14:08.521] data.WU_FadeInDelay=0 [2025-09-23 21:14:08.521] max_time_out=0 [2025-09-23 21:14:08.521] No splash screen [2025-09-23 21:14:08.521] stop dss Done [2025-09-23 21:14:08.601] /dev/mem opened. [2025-09-23 21:14:08.601] Memory mapped at address 0xffff840b3000. [2025-09-23 21:14:08.601] Read at address 0x00600018 (0xffff840b3018): 0x00000000 [2025-09-23 21:14:08.601] Write at address 0x00600018 (0xffff840b3018): 0x00400040, readback 0x00400040 [2025-09-23 21:14:08.601] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:14:08.601] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:14:08.696] Loaded PowerVR consumer services. [2025-09-23 21:14:08.862] Waiting data available... [2025-09-23 21:14:08.862] 512+0 records in [2025-09-23 21:14:08.862] 512+0 records out [2025-09-23 21:14:08.910] Starting syslogd/klogd: done [2025-09-23 21:14:08.926] DML Start [2025-09-23 21:14:09.102] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:14:09.325] DML res1: 0 [2025-09-23 21:14:09.796] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:14:09.796] Read Success [2025-09-23 21:14:09.796] Verifying certificate... [2025-09-23 21:14:10.036] Verified OK [2025-09-23 21:14:10.052] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:14:11.635] Verified OK [2025-09-23 21:14:11.656] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:14:12.287] Verified OK [2025-09-23 21:14:12.287] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:14:14.942] fs.protected_hardlinks = 1 [2025-09-23 21:14:14.958] fs.protected_symlinks = 1 [2025-09-23 21:14:14.958] kernel.modules_disabled = 1 [2025-09-23 21:14:15.166] [2025-09-23 21:14:15.166] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:14:16.366] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:14:24.147] SBL1:1210.0.1.0 [2025-09-23 21:14:24.179] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:14:25.762] SBL2:1210.0.1.0 [2025-09-23 21:14:25.794] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:14:25.906] j-A [2025-09-23 21:14:33.280] The R5 Autosar Classic is running [2025-09-23 21:14:33.280] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:14:33.280] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:14:33.888] INIT: version 2.96 booting [2025-09-23 21:14:33.999] INIT: Entering runlevel: 5 [2025-09-23 21:14:34.143] mtd24 attached [2025-09-23 21:14:34.159] mtd28 attached [2025-09-23 21:14:34.175] mtd32 attached [2025-09-23 21:14:34.224] RTNETLINK answers: File exists [2025-09-23 21:14:34.224] ubi0:textures is mounted. [2025-09-23 21:14:34.282] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:14:34.282] ubi1:animations is mounted. [2025-09-23 21:14:34.282] ubi2:dml_code is mounted. [2025-09-23 21:14:34.282] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:14:34.282] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:14:34.282] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:14:34.282] data.LB_FadeInType0=100 [2025-09-23 21:14:34.282] data.CHLH_FadeInType0=0 [2025-09-23 21:14:34.282] data.WU_FadeInDelay=0 [2025-09-23 21:14:34.282] max_time_out=0 [2025-09-23 21:14:34.282] No splash screen [2025-09-23 21:14:34.282] stop dss Done [2025-09-23 21:14:34.282] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:14:34.313] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:14:34.353] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:14:34.353] /dev/mem opened. [2025-09-23 21:14:34.353] Memory mapped at address 0xffff88d28000. [2025-09-23 21:14:34.353] Read at address 0x00600018 (0xffff88d28018): 0x00000000 [2025-09-23 21:14:34.353] Write at address 0x00600018 (0xffff88d28018): 0x00400040, readback 0x00400040 [2025-09-23 21:14:34.497] Loaded PowerVR consumer services. [2025-09-23 21:14:34.638] Waiting data available... [2025-09-23 21:14:34.638] 512+0 records in [2025-09-23 21:14:34.638] 512+0 records out [2025-09-23 21:14:34.670] Starting syslogd/klogd: done [2025-09-23 21:14:34.686] DML Start [2025-09-23 21:14:34.846] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:14:35.069] DML res1: 0 [2025-09-23 21:14:35.501] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:14:35.522] Read Success [2025-09-23 21:14:35.522] Verifying certificate... [2025-09-23 21:14:35.762] Verified OK [2025-09-23 21:14:35.794] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:14:37.538] Verified OK [2025-09-23 21:14:37.538] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:14:38.142] Verified OK [2025-09-23 21:14:38.142] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:14:40.636] fs.protected_hardlinks = 1 [2025-09-23 21:14:40.652] fs.protected_symlinks = 1 [2025-09-23 21:14:40.652] kernel.modules_disabled = 1 [2025-09-23 21:14:40.860] [2025-09-23 21:14:40.860] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:14:42.107] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:14:49.887] SBL1:1210.0.1.0 [2025-09-23 21:14:49.935] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:14:51.503] SBL2:1210.0.1.0 [2025-09-23 21:14:51.551] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:14:51.662] j-A [2025-09-23 21:14:59.032] The R5 Autosar Classic is running [2025-09-23 21:14:59.032] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:14:59.032] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:14:59.640] INIT: version 2.96 booting [2025-09-23 21:14:59.751] INIT: Entering runlevel: 5 [2025-09-23 21:14:59.895] mtd28 attached [2025-09-23 21:14:59.910] mtd24 attached [2025-09-23 21:14:59.926] mtd32 attached [2025-09-23 21:14:59.974] ubi1:textures is mounted. [2025-09-23 21:14:59.974] ubi0:animations is mounted. [2025-09-23 21:14:59.974] RTNETLINK answers: File exists [2025-09-23 21:14:59.990] ubi2:dml_code is mounted. [2025-09-23 21:15:00.031] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:15:00.031] data.LB_FadeInType0=100 [2025-09-23 21:15:00.031] data.CHLH_FadeInType0=0 [2025-09-23 21:15:00.031] data.WU_FadeInDelay=0 [2025-09-23 21:15:00.031] max_time_out=0 [2025-09-23 21:15:00.031] No splash screen [2025-09-23 21:15:00.031] stop dss Done [2025-09-23 21:15:00.031] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:15:00.031] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:15:00.031] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:15:00.047] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:15:00.063] /dev/mem opened. [2025-09-23 21:15:00.063] Memory mapped at address 0xffff832e7000. [2025-09-23 21:15:00.089] Read at address 0x00600018 (0xffff832e7018): 0x00000000 [2025-09-23 21:15:00.089] Write at address 0x00600018 (0xffff832e7018): 0x00400040, readback 0x00400040 [2025-09-23 21:15:00.153] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:15:00.169] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:15:00.345] Loaded PowerVR consumer services. [2025-09-23 21:15:00.361] Waiting data available... [2025-09-23 21:15:00.377] 512+0 records in [2025-09-23 21:15:00.377] 512+0 records out [2025-09-23 21:15:00.425] Starting syslogd/klogd: done [2025-09-23 21:15:00.441] DML Start [2025-09-23 21:15:00.632] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:15:00.856] DML res1: 0 [2025-09-23 21:15:01.282] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:15:01.282] Read Success [2025-09-23 21:15:01.282] Verifying certificate... [2025-09-23 21:15:01.522] Verified OK [2025-09-23 21:15:01.538] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:15:03.214] Verified OK [2025-09-23 21:15:03.214] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:15:03.822] Verified OK [2025-09-23 21:15:03.822] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:15:06.540] fs.protected_hardlinks = 1 [2025-09-23 21:15:06.540] fs.protected_symlinks = 1 [2025-09-23 21:15:06.556] kernel.modules_disabled = 1 [2025-09-23 21:15:06.747] [2025-09-23 21:15:06.747] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:15:07.859] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:15:15.650] SBL1:1210.0.1.0 [2025-09-23 21:15:15.698] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:15:17.264] SBL2:1210.0.1.0 [2025-09-23 21:15:17.312] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:15:17.409] j-A [2025-09-23 21:15:24.763] The R5 Autosar Classic is running [2025-09-23 21:15:24.788] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:15:24.788] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:15:25.395] INIT: version 2.96 booting [2025-09-23 21:15:25.508] INIT: Entering runlevel: 5 [2025-09-23 21:15:25.667] mtd28 attached [2025-09-23 21:15:25.667] mtd24 attached [2025-09-23 21:15:25.683] mtd32 attached [2025-09-23 21:15:25.731] RTNETLINK answers: File exists [2025-09-23 21:15:25.731] ubi1:textures is mounted. [2025-09-23 21:15:25.793] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:15:25.793] ubi0:animations is mounted. [2025-09-23 21:15:25.793] ubi2:dml_code is mounted. [2025-09-23 21:15:25.793] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:15:25.793] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:15:25.793] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:15:25.793] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:15:25.793] data.LB_FadeInType0=100 [2025-09-23 21:15:25.793] data.CHLH_FadeInType0=0 [2025-09-23 21:15:25.793] data.WU_FadeInDelay=0 [2025-09-23 21:15:25.793] max_time_out=0 [2025-09-23 21:15:25.793] No splash screen [2025-09-23 21:15:25.793] stop dss Done [2025-09-23 21:15:25.824] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:15:25.840] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:15:25.876] /dev/mem opened. [2025-09-23 21:15:25.876] Memory mapped at address 0xffff85ebd000. [2025-09-23 21:15:25.876] Read at address 0x00600018 (0xffff85ebd018): 0x00000000 [2025-09-23 21:15:25.876] Write at address 0x00600018 (0xffff85ebd018): 0x00400040, readback 0x00400040 [2025-09-23 21:15:26.020] Loaded PowerVR consumer services. [2025-09-23 21:15:26.132] Waiting data available... [2025-09-23 21:15:26.148] 512+0 records in [2025-09-23 21:15:26.148] 512+0 records out [2025-09-23 21:15:26.196] Starting syslogd/klogd: done [2025-09-23 21:15:26.212] DML Start [2025-09-23 21:15:26.387] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:15:26.612] DML res1: 0 [2025-09-23 21:15:27.043] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:15:27.064] Read Success [2025-09-23 21:15:27.064] Verifying certificate... [2025-09-23 21:15:27.320] Verified OK [2025-09-23 21:15:27.352] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:15:28.990] Verified OK [2025-09-23 21:15:28.990] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:15:29.655] Verified OK [2025-09-23 21:15:29.655] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:15:32.293] fs.protected_hardlinks = 1 [2025-09-23 21:15:32.293] fs.protected_symlinks = 1 [2025-09-23 21:15:32.308] kernel.modules_disabled = 1 [2025-09-23 21:15:32.501] [2025-09-23 21:15:32.501] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:15:33.645] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:15:41.389] SBL1:1210.0.1.0 [2025-09-23 21:15:41.437] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:15:43.004] SBL2:1210.0.1.0 [2025-09-23 21:15:43.052] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:15:43.148] j-A [2025-09-23 21:15:50.503] The R5 Autosar Classic is running [2025-09-23 21:15:50.503] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:15:50.524] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:15:51.131] INIT: version 2.96 booting [2025-09-23 21:15:51.243] INIT: Entering runlevel: 5 [2025-09-23 21:15:51.387] mtd24 attached [2025-09-23 21:15:51.403] mtd28 attached [2025-09-23 21:15:51.419] mtd32 attached [2025-09-23 21:15:51.525] RTNETLINK answers: File exists [2025-09-23 21:15:51.525] ubi0:textures is mounted. [2025-09-23 21:15:51.525] ubi1:animations is mounted. [2025-09-23 21:15:51.525] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:15:51.525] ubi2:dml_code is mounted. [2025-09-23 21:15:51.525] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:15:51.525] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:15:51.525] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:15:51.525] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:15:51.525] data.LB_FadeInType0=100 [2025-09-23 21:15:51.525] data.CHLH_FadeInType0=0 [2025-09-23 21:15:51.525] data.WU_FadeInDelay=0 [2025-09-23 21:15:51.525] max_time_out=0 [2025-09-23 21:15:51.525] No splash screen [2025-09-23 21:15:51.525] stop dss Done [2025-09-23 21:15:51.568] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:15:51.568] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:15:51.608] /dev/mem opened. [2025-09-23 21:15:51.608] Memory mapped at address 0xffff94f7e000. [2025-09-23 21:15:51.608] Read at address 0x00600018 (0xffff94f7e018): 0x00000000 [2025-09-23 21:15:51.608] Write at address 0x00600018 (0xffff94f7e018): 0x00400040, readback 0x00400040 [2025-09-23 21:15:51.832] Loaded PowerVR consumer services. [2025-09-23 21:15:51.879] Waiting data available... [2025-09-23 21:15:51.895] 512+0 records in [2025-09-23 21:15:51.895] 512+0 records out [2025-09-23 21:15:51.943] Starting syslogd/klogd: done [2025-09-23 21:15:51.959] DML Start [2025-09-23 21:15:52.151] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:15:52.359] DML res1: 0 [2025-09-23 21:15:52.733] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:15:52.733] Read Success [2025-09-23 21:15:52.733] Verifying certificate... [2025-09-23 21:15:53.004] Verified OK [2025-09-23 21:15:53.036] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:15:54.747] Verified OK [2025-09-23 21:15:54.763] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:15:55.329] Verified OK [2025-09-23 21:15:55.330] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:15:57.776] fs.protected_hardlinks = 1 [2025-09-23 21:15:57.776] fs.protected_symlinks = 1 [2025-09-23 21:15:57.792] kernel.modules_disabled = 1 [2025-09-23 21:15:57.983] [2025-09-23 21:15:57.983] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:15:59.386] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:16:07.125] SBL1:1210.0.1.0 [2025-09-23 21:16:07.157] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:16:08.740] SBL2:1210.0.1.0 [2025-09-23 21:16:08.772] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 21:16:08.884] j-A [2025-09-23 21:16:16.258] The R5 Autosar Classic is running [2025-09-23 21:16:16.258] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:16:16.258] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:16:16.866] INIT: version 2.96 booting [2025-09-23 21:16:16.978] INIT: Entering runlevel: 5 [2025-09-23 21:16:17.122] mtd24 attached [2025-09-23 21:16:17.138] mtd28 attached [2025-09-23 21:16:17.154] mtd32 attached [2025-09-23 21:16:17.202] ubi0:textures is mounted. [2025-09-23 21:16:17.202] RTNETLINK answers: File exists [2025-09-23 21:16:17.261] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:16:17.261] ubi2:dml_code is mounted. [2025-09-23 21:16:17.261] ubi1:animations is mounted. [2025-09-23 21:16:17.261] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:16:17.261] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:16:17.261] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:16:17.261] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:16:17.261] data.LB_FadeInType0=100 [2025-09-23 21:16:17.261] data.CHLH_FadeInType0=0 [2025-09-23 21:16:17.261] data.WU_FadeInDelay=0 [2025-09-23 21:16:17.261] max_time_out=0 [2025-09-23 21:16:17.261] No splash screen [2025-09-23 21:16:17.261] stop dss Done [2025-09-23 21:16:17.343] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:16:17.343] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:16:17.343] /dev/mem opened. [2025-09-23 21:16:17.343] Memory mapped at address 0xffffa68a3000. [2025-09-23 21:16:17.343] Read at address 0x00600018 (0xffffa68a3018): 0x00000000 [2025-09-23 21:16:17.343] Write at address 0x00600018 (0xffffa68a3018): 0x00400040, readback 0x00400040 [2025-09-23 21:16:17.455] Loaded PowerVR consumer services. [2025-09-23 21:16:17.615] Waiting data available... [2025-09-23 21:16:17.630] 512+0 records in [2025-09-23 21:16:17.630] 512+0 records out [2025-09-23 21:16:17.662] Starting syslogd/klogd: done [2025-09-23 21:16:17.678] DML Start [2025-09-23 21:16:17.823] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:16:18.030] DML res1: 0 [2025-09-23 21:16:18.605] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:16:18.605] Read Success [2025-09-23 21:16:18.605] Verifying certificate... [2025-09-23 21:16:18.893] Verified OK [2025-09-23 21:16:18.909] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:16:20.584] Verified OK [2025-09-23 21:16:20.584] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:16:21.175] Verified OK [2025-09-23 21:16:21.191] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:16:23.765] fs.protected_hardlinks = 1 [2025-09-23 21:16:23.793] fs.protected_symlinks = 1 [2025-09-23 21:16:23.793] kernel.modules_disabled = 1 [2025-09-23 21:16:23.985] [2025-09-23 21:16:23.985] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:16:25.159] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:16:32.864] SBL1:1210.0.1.0 [2025-09-23 21:16:32.912] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:16:34.478] SBL2:1210.0.1.0 [2025-09-23 21:16:34.526] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:16:34.639] j-A [2025-09-23 21:16:41.978] The R5 Autosar Classic is running [2025-09-23 21:16:42.009] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:16:42.009] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:16:42.616] INIT: version 2.96 booting [2025-09-23 21:16:42.728] INIT: Entering runlevel: 5 [2025-09-23 21:16:42.888] mtd24 attached [2025-09-23 21:16:42.888] mtd28 attached [2025-09-23 21:16:42.904] mtd32 attached [2025-09-23 21:16:42.936] ubi0:textures is mounted. [2025-09-23 21:16:42.952] RTNETLINK answers: File exists [2025-09-23 21:16:42.992] ubi1:animations is mounted. [2025-09-23 21:16:42.992] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:16:42.992] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:16:42.992] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:16:42.992] ubi2:dml_code is mounted. [2025-09-23 21:16:42.992] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:16:42.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:16:42.992] data.LB_FadeInType0=100 [2025-09-23 21:16:43.013] data.CHLH_FadeInType0=0 [2025-09-23 21:16:43.013] data.WU_FadeInDelay=0 [2025-09-23 21:16:43.013] max_time_out=0 [2025-09-23 21:16:43.013] No splash screen [2025-09-23 21:16:43.013] stop dss Done [2025-09-23 21:16:43.045] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:16:43.061] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:16:43.076] /dev/mem opened. [2025-09-23 21:16:43.076] Memory mapped at address 0xffffb67e6000. [2025-09-23 21:16:43.102] Read at address 0x00600018 (0xffffb67e6018): 0x00000000 [2025-09-23 21:16:43.102] Write at address 0x00600018 (0xffffb67e6018): 0x00400040, readback 0x00400040 [2025-09-23 21:16:43.294] Loaded PowerVR consumer services. [2025-09-23 21:16:43.390] Waiting data available... [2025-09-23 21:16:43.406] 512+0 records in [2025-09-23 21:16:43.406] 512+0 records out [2025-09-23 21:16:43.422] Starting syslogd/klogd: done [2025-09-23 21:16:43.438] DML Start [2025-09-23 21:16:43.582] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:16:43.806] DML res1: 0 [2025-09-23 21:16:44.316] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:16:44.316] Read Success [2025-09-23 21:16:44.316] Verifying certificate... [2025-09-23 21:16:44.557] Verified OK [2025-09-23 21:16:44.573] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:16:46.226] Verified OK [2025-09-23 21:16:46.226] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:16:46.846] Verified OK [2025-09-23 21:16:46.846] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:16:49.483] fs.protected_hardlinks = 1 [2025-09-23 21:16:49.500] fs.protected_symlinks = 1 [2025-09-23 21:16:49.500] kernel.modules_disabled = 1 [2025-09-23 21:16:49.707] [2025-09-23 21:16:49.707] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:16:50.887] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:16:58.637] SBL1:1210.0.1.0 [2025-09-23 21:16:58.669] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:17:00.252] SBL2:1210.0.1.0 [2025-09-23 21:17:00.283] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:17:00.395] j-A [2025-09-23 21:17:07.770] The R5 Autosar Classic is running [2025-09-23 21:17:07.770] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:17:07.770] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:17:08.378] INIT: version 2.96 booting [2025-09-23 21:17:08.490] INIT: Entering runlevel: 5 [2025-09-23 21:17:08.650] mtd28 attached [2025-09-23 21:17:08.650] mtd24 attached [2025-09-23 21:17:08.666] mtd32 attached [2025-09-23 21:17:08.698] ubi0:animations is mounted. [2025-09-23 21:17:08.714] RTNETLINK answers: File exists [2025-09-23 21:17:08.749] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:17:08.749] ubi1:textures is mounted. [2025-09-23 21:17:08.749] ubi2:dml_code is mounted. [2025-09-23 21:17:08.749] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:17:08.749] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:17:08.781] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:17:08.781] data.LB_FadeInType0=100 [2025-09-23 21:17:08.781] data.CHLH_FadeInType0=0 [2025-09-23 21:17:08.781] data.WU_FadeInDelay=0 [2025-09-23 21:17:08.781] max_time_out=0 [2025-09-23 21:17:08.781] No splash screen [2025-09-23 21:17:08.781] stop dss Done [2025-09-23 21:17:08.781] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:17:08.813] /dev/mem opened. [2025-09-23 21:17:08.861] Memory mapped at address 0xffffa6105000. [2025-09-23 21:17:08.861] Read at address 0x00600018 (0xffffa6105018): 0x00000000 [2025-09-23 21:17:08.861] Write at address 0x00600018 (0xffffa6105018): 0x00400040, readback 0x00400040 [2025-09-23 21:17:08.861] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:17:08.861] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:17:08.974] Loaded PowerVR consumer services. [2025-09-23 21:17:09.117] Waiting data available... [2025-09-23 21:17:09.133] 512+0 records in [2025-09-23 21:17:09.133] 512+0 records out [2025-09-23 21:17:09.149] Starting syslogd/klogd: done [2025-09-23 21:17:09.165] DML Start [2025-09-23 21:17:09.373] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:17:09.629] DML res1: 0 [2025-09-23 21:17:09.947] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:17:09.947] Read Success [2025-09-23 21:17:09.947] Verifying certificate... [2025-09-23 21:17:10.187] Verified OK [2025-09-23 21:17:10.203] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:17:11.778] Verified OK [2025-09-23 21:17:11.778] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:17:12.352] Verified OK [2025-09-23 21:17:12.352] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:17:15.055] fs.protected_hardlinks = 1 [2025-09-23 21:17:15.071] fs.protected_symlinks = 1 [2025-09-23 21:17:15.087] kernel.modules_disabled = 1 [2025-09-23 21:17:15.278] [2025-09-23 21:17:15.278] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:17:16.682] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:17:24.413] SBL1:1210.0.1.0 [2025-09-23 21:17:24.445] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:17:26.028] SBL2:1210.0.1.0 [2025-09-23 21:17:26.060] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:17:26.171] j-A [2025-09-23 21:17:33.545] The R5 Autosar Classic is running [2025-09-23 21:17:33.545] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:17:33.545] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:17:34.153] INIT: version 2.96 booting [2025-09-23 21:17:34.264] INIT: Entering runlevel: 5 [2025-09-23 21:17:34.409] mtd24 attached [2025-09-23 21:17:34.425] mtd28 attached [2025-09-23 21:17:34.441] mtd32 attached [2025-09-23 21:17:34.473] ubi0:textures is mounted. [2025-09-23 21:17:34.489] RTNETLINK answers: File exists [2025-09-23 21:17:34.550] ubi1:animations is mounted. [2025-09-23 21:17:34.550] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:17:34.550] ubi2:dml_code is mounted. [2025-09-23 21:17:34.550] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:17:34.550] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:17:34.550] data.LB_FadeInType0=100 [2025-09-23 21:17:34.550] data.CHLH_FadeInType0=0 [2025-09-23 21:17:34.550] data.WU_FadeInDelay=0 [2025-09-23 21:17:34.550] max_time_out=0 [2025-09-23 21:17:34.550] No splash screen [2025-09-23 21:17:34.550] stop dss Done [2025-09-23 21:17:34.550] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:17:34.550] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:17:34.581] /dev/mem opened. [2025-09-23 21:17:34.619] Memory mapped at address 0xffffadbd2000. [2025-09-23 21:17:34.619] Read at address 0x00600018 (0xffffadbd2018): 0x00000000 [2025-09-23 21:17:34.619] Write at address 0x00600018 (0xffffadbd2018): 0x00400040, readback 0x00400040 [2025-09-23 21:17:34.619] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:17:34.635] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:17:34.859] Loaded PowerVR consumer services. [2025-09-23 21:17:34.907] Waiting data available... [2025-09-23 21:17:34.923] 512+0 records in [2025-09-23 21:17:34.923] 512+0 records out [2025-09-23 21:17:34.955] Starting syslogd/klogd: done [2025-09-23 21:17:34.972] DML Start [2025-09-23 21:17:35.131] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:17:35.339] DML res1: 0 [2025-09-23 21:17:35.769] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:17:35.769] Read Success [2025-09-23 21:17:35.769] Verifying certificate... [2025-09-23 21:17:36.024] Verified OK [2025-09-23 21:17:36.040] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:17:37.544] Verified OK [2025-09-23 21:17:37.544] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:17:38.176] Verified OK [2025-09-23 21:17:38.176] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:17:40.990] fs.protected_hardlinks = 1 [2025-09-23 21:17:40.990] fs.protected_symlinks = 1 [2025-09-23 21:17:41.007] kernel.modules_disabled = 1 [2025-09-23 21:17:41.183] [2025-09-23 21:17:41.183] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:17:42.426] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:17:50.149] SBL1:1210.0.1.0 [2025-09-23 21:17:50.197] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:17:51.765] SBL2:1210.0.1.0 [2025-09-23 21:17:51.812] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:17:51.909] j-A [2025-09-23 21:17:59.262] The R5 Autosar Classic is running [2025-09-23 21:17:59.285] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:17:59.285] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:17:59.893] INIT: version 2.96 booting [2025-09-23 21:18:00.005] INIT: Entering runlevel: 5 [2025-09-23 21:18:00.165] mtd28 attached [2025-09-23 21:18:00.165] mtd24 attached [2025-09-23 21:18:00.181] mtd32 attached [2025-09-23 21:18:00.229] RTNETLINK answers: File exists [2025-09-23 21:18:00.273] ubi1:textures is mounted. [2025-09-23 21:18:00.273] ubi0:animations is mounted. [2025-09-23 21:18:00.273] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:18:00.273] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:18:00.273] ubi2:dml_code is mounted. [2025-09-23 21:18:00.273] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:18:00.273] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:18:00.273] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:18:00.273] data.LB_FadeInType0=100 [2025-09-23 21:18:00.294] data.CHLH_FadeInType0=0 [2025-09-23 21:18:00.294] data.WU_FadeInDelay=0 [2025-09-23 21:18:00.294] max_time_out=0 [2025-09-23 21:18:00.294] No splash screen [2025-09-23 21:18:00.294] stop dss Done [2025-09-23 21:18:00.326] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:18:00.342] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:18:00.375] /dev/mem opened. [2025-09-23 21:18:00.375] Memory mapped at address 0xffff8c32e000. [2025-09-23 21:18:00.375] Read at address 0x00600018 (0xffff8c32e018): 0x00000000 [2025-09-23 21:18:00.375] Write at address 0x00600018 (0xffff8c32e018): 0x00400040, readback 0x00400040 [2025-09-23 21:18:00.455] Loaded PowerVR consumer services. [2025-09-23 21:18:00.631] Waiting data available... [2025-09-23 21:18:00.647] 512+0 records in [2025-09-23 21:18:00.647] 512+0 records out [2025-09-23 21:18:00.695] Starting syslogd/klogd: done [2025-09-23 21:18:00.695] DML Start [2025-09-23 21:18:00.855] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:18:01.095] DML res1: 0 [2025-09-23 21:18:01.574] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:18:01.574] Read Success [2025-09-23 21:18:01.590] Verifying certificate... [2025-09-23 21:18:01.830] Verified OK [2025-09-23 21:18:01.846] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:18:03.643] Verified OK [2025-09-23 21:18:03.643] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:18:04.167] Verified OK [2025-09-23 21:18:04.167] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:18:06.597] fs.protected_hardlinks = 1 [2025-09-23 21:18:06.597] fs.protected_symlinks = 1 [2025-09-23 21:18:06.597] kernel.modules_disabled = 1 [2025-09-23 21:18:06.789] [2025-09-23 21:18:06.789] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:18:08.132] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:18:15.923] SBL1:1210.0.1.0 [2025-09-23 21:18:15.971] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:18:17.538] SBL2:1210.0.1.0 [2025-09-23 21:18:17.586] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:18:17.682] j-A [2025-09-23 21:18:25.036] The R5 Autosar Classic is running [2025-09-23 21:18:25.059] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:18:25.059] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:18:25.666] INIT: version 2.96 booting [2025-09-23 21:18:25.777] INIT: Entering runlevel: 5 [2025-09-23 21:18:25.938] mtd24 attached [2025-09-23 21:18:25.938] mtd32 attached [2025-09-23 21:18:25.954] mtd28 attached [2025-09-23 21:18:26.001] ubi0:textures is mounted. [2025-09-23 21:18:26.069] RTNETLINK answers: File exists [2025-09-23 21:18:26.069] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:18:26.069] ubi2:animations is mounted. [2025-09-23 21:18:26.069] ubi1:dml_code is mounted. [2025-09-23 21:18:26.069] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:18:26.069] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:18:26.069] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:18:26.069] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:18:26.069] data.LB_FadeInType0=100 [2025-09-23 21:18:26.069] data.CHLH_FadeInType0=0 [2025-09-23 21:18:26.069] data.WU_FadeInDelay=0 [2025-09-23 21:18:26.069] max_time_out=0 [2025-09-23 21:18:26.069] No splash screen [2025-09-23 21:18:26.069] stop dss Done [2025-09-23 21:18:26.101] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:18:26.143] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:18:26.143] /dev/mem opened. [2025-09-23 21:18:26.143] Memory mapped at address 0xffff92b31000. [2025-09-23 21:18:26.143] Read at address 0x00600018 (0xffff92b31018): 0x00000000 [2025-09-23 21:18:26.143] Write at address 0x00600018 (0xffff92b31018): 0x00400040, readback 0x00400040 [2025-09-23 21:18:26.319] Loaded PowerVR consumer services. [2025-09-23 21:18:26.415] Waiting data available... [2025-09-23 21:18:26.431] 512+0 records in [2025-09-23 21:18:26.447] 512+0 records out [2025-09-23 21:18:26.463] Starting syslogd/klogd: done [2025-09-23 21:18:26.479] DML Start [2025-09-23 21:18:26.671] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:18:26.911] DML res1: 0 [2025-09-23 21:18:27.309] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:18:27.309] Read Success [2025-09-23 21:18:27.309] Verifying certificate... [2025-09-23 21:18:27.580] Verified OK [2025-09-23 21:18:27.580] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:18:29.244] Verified OK [2025-09-23 21:18:29.244] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:18:29.891] Verified OK [2025-09-23 21:18:29.891] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:18:32.545] fs.protected_hardlinks = 1 [2025-09-23 21:18:32.561] fs.protected_symlinks = 1 [2025-09-23 21:18:32.561] kernel.modules_disabled = 1 [2025-09-23 21:18:32.754] [2025-09-23 21:18:32.754] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:18:33.977] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:18:41.662] SBL1:1210.0.1.0 [2025-09-23 21:18:41.710] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:18:43.276] SBL2:1210.0.1.0 [2025-09-23 21:18:43.324] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:18:43.436] j-A [2025-09-23 21:18:50.807] The R5 Autosar Classic is running [2025-09-23 21:18:50.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:18:50.807] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:18:51.415] INIT: version 2.96 booting [2025-09-23 21:18:51.527] INIT: Entering runlevel: 5 [2025-09-23 21:18:51.687] mtd32 attached [2025-09-23 21:18:51.687] mtd24 attached [2025-09-23 21:18:51.702] mtd28 attached [2025-09-23 21:18:51.792] RTNETLINK answers: File exists [2025-09-23 21:18:51.792] ubi0:dml_code is mounted. [2025-09-23 21:18:51.792] ubi1:textures is mounted. [2025-09-23 21:18:51.792] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:18:51.792] ubi2:animations is mounted. [2025-09-23 21:18:51.792] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:18:51.792] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:18:51.792] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:18:51.792] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:18:51.820] data.LB_FadeInType0=100 [2025-09-23 21:18:51.820] data.CHLH_FadeInType0=0 [2025-09-23 21:18:51.820] data.WU_FadeInDelay=0 [2025-09-23 21:18:51.820] max_time_out=0 [2025-09-23 21:18:51.820] No splash screen [2025-09-23 21:18:51.820] stop dss Done [2025-09-23 21:18:51.906] /dev/mem opened. [2025-09-23 21:18:51.906] Memory mapped at address 0xffffbe807000. [2025-09-23 21:18:51.906] Read at address 0x00600018 (0xffffbe807018): 0x00000000 [2025-09-23 21:18:51.906] Write at address 0x00600018 (0xffffbe807018): 0x00400040, readback 0x00400040 [2025-09-23 21:18:51.906] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:18:51.906] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:18:52.018] Loaded PowerVR consumer services. [2025-09-23 21:18:52.185] Waiting data available... [2025-09-23 21:18:52.185] 512+0 records in [2025-09-23 21:18:52.185] 512+0 records out [2025-09-23 21:18:52.216] Starting syslogd/klogd: done [2025-09-23 21:18:52.232] DML Start [2025-09-23 21:18:52.409] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:18:52.616] DML res1: 0 [2025-09-23 21:18:53.106] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:18:53.106] Read Success [2025-09-23 21:18:53.106] Verifying certificate... [2025-09-23 21:18:53.410] Verified OK [2025-09-23 21:18:53.425] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:18:54.992] Verified OK [2025-09-23 21:18:54.992] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:18:55.680] Verified OK [2025-09-23 21:18:55.680] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:18:58.331] fs.protected_hardlinks = 1 [2025-09-23 21:18:58.331] fs.protected_symlinks = 1 [2025-09-23 21:18:58.331] kernel.modules_disabled = 1 [2025-09-23 21:18:58.506] [2025-09-23 21:18:58.506] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:18:59.714] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:19:07.431] SBL1:1210.0.1.0 [2025-09-23 21:19:07.463] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:19:09.046] SBL2:1210.0.1.0 [2025-09-23 21:19:09.078] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:19:09.190] j-A [2025-09-23 21:19:16.544] The R5 Autosar Classic is running [2025-09-23 21:19:16.544] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:19:16.564] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:19:17.172] INIT: version 2.96 booting [2025-09-23 21:19:17.284] INIT: Entering runlevel: 5 [2025-09-23 21:19:17.428] mtd24 attached [2025-09-23 21:19:17.444] mtd28 attached [2025-09-23 21:19:17.460] mtd32 attached [2025-09-23 21:19:17.492] ubi0:textures is mounted. [2025-09-23 21:19:17.507] RTNETLINK answers: File exists [2025-09-23 21:19:17.543] ubi2:dml_code is mounted. [2025-09-23 21:19:17.543] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:19:17.543] ubi1:animations is mounted. [2025-09-23 21:19:17.543] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:19:17.543] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:19:17.543] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:19:17.543] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:19:17.570] data.LB_FadeInType0=100 [2025-09-23 21:19:17.570] data.CHLH_FadeInType0=0 [2025-09-23 21:19:17.570] data.WU_FadeInDelay=0 [2025-09-23 21:19:17.570] max_time_out=0 [2025-09-23 21:19:17.570] No splash screen [2025-09-23 21:19:17.570] stop dss Done [2025-09-23 21:19:17.618] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:19:17.618] /dev/mem opened. [2025-09-23 21:19:17.652] Memory mapped at address 0xffffae03a000. [2025-09-23 21:19:17.652] Read at address 0x00600018 (0xffffae03a018): 0x00000000 [2025-09-23 21:19:17.652] Write at address 0x00600018 (0xffffae03a018): 0x00400040, readback 0x00400040 [2025-09-23 21:19:17.652] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:19:17.860] Loaded PowerVR consumer services. [2025-09-23 21:19:17.924] 512+0 records in [2025-09-23 21:19:17.924] 512+0 records out [2025-09-23 21:19:17.924] Waiting data available... [2025-09-23 21:19:17.972] Starting syslogd/klogd: done [2025-09-23 21:19:17.987] DML Start [2025-09-23 21:19:18.148] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:19:18.339] DML res1: 0 [2025-09-23 21:19:18.834] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:19:18.857] Read Success [2025-09-23 21:19:18.857] Verifying certificate... [2025-09-23 21:19:19.081] Verified OK [2025-09-23 21:19:19.097] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:19:20.656] Verified OK [2025-09-23 21:19:20.656] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:19:21.255] Verified OK [2025-09-23 21:19:21.255] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:19:24.006] fs.protected_hardlinks = 1 [2025-09-23 21:19:24.032] fs.protected_symlinks = 1 [2025-09-23 21:19:24.032] kernel.modules_disabled = 1 [2025-09-23 21:19:24.240] [2025-09-23 21:19:24.240] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:19:25.423] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:19:33.183] SBL1:1210.0.1.0 [2025-09-23 21:19:33.231] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:19:34.798] SBL2:1210.0.1.0 [2025-09-23 21:19:34.846] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:19:34.942] j-A [2025-09-23 21:19:42.296] The R5 Autosar Classic is running [2025-09-23 21:19:42.320] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:19:42.320] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:19:42.928] INIT: version 2.96 booting [2025-09-23 21:19:43.040] INIT: Entering runlevel: 5 [2025-09-23 21:19:43.184] mtd28 attached [2025-09-23 21:19:43.199] mtd24 attached [2025-09-23 21:19:43.215] mtd32 attached [2025-09-23 21:19:43.297] RTNETLINK answers: File exists [2025-09-23 21:19:43.297] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:19:43.297] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:19:43.297] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:19:43.297] ubi0:animations is mounted. [2025-09-23 21:19:43.297] ubi1:textures is mounted. [2025-09-23 21:19:43.297] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:19:43.297] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:19:43.297] ubi2:dml_code is mounted. [2025-09-23 21:19:43.327] data.LB_FadeInType0=100 [2025-09-23 21:19:43.327] data.CHLH_FadeInType0=0 [2025-09-23 21:19:43.327] data.WU_FadeInDelay=0 [2025-09-23 21:19:43.327] max_time_out=0 [2025-09-23 21:19:43.327] No splash screen [2025-09-23 21:19:43.327] stop dss Done [2025-09-23 21:19:43.327] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:19:43.349] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:19:43.382] /dev/mem opened. [2025-09-23 21:19:43.382] Memory mapped at address 0xffff88d29000. [2025-09-23 21:19:43.408] Read at address 0x00600018 (0xffff88d29018): 0x00000000 [2025-09-23 21:19:43.408] Write at address 0x00600018 (0xffff88d29018): 0x00400040, readback 0x00400040 [2025-09-23 21:19:43.472] Loaded PowerVR consumer services. [2025-09-23 21:19:43.647] Waiting data available... [2025-09-23 21:19:43.663] 512+0 records in [2025-09-23 21:19:43.663] 512+0 records out [2025-09-23 21:19:43.711] Starting syslogd/klogd: done [2025-09-23 21:19:43.727] DML Start [2025-09-23 21:19:43.887] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:19:44.143] DML res1: 0 [2025-09-23 21:19:44.521] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:19:44.522] Read Success [2025-09-23 21:19:44.522] Verifying certificate... [2025-09-23 21:19:44.762] Verified OK [2025-09-23 21:19:44.778] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:19:46.371] Verified OK [2025-09-23 21:19:46.371] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:19:47.026] Verified OK [2025-09-23 21:19:47.026] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:19:49.696] fs.protected_hardlinks = 1 [2025-09-23 21:19:49.696] fs.protected_symlinks = 1 [2025-09-23 21:19:49.712] kernel.modules_disabled = 1 [2025-09-23 21:19:49.904] [2025-09-23 21:19:49.904] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:19:51.167] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:19:58.939] SBL1:1210.0.1.0 [2025-09-23 21:19:58.971] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:20:00.554] SBL2:1210.0.1.0 [2025-09-23 21:20:00.586] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:20:00.698] j-A [2025-09-23 21:20:08.070] The R5 Autosar Classic is running [2025-09-23 21:20:08.070] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:20:08.070] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:20:08.677] INIT: version 2.96 booting [2025-09-23 21:20:08.789] INIT: Entering runlevel: 5 [2025-09-23 21:20:08.933] mtd28 attached [2025-09-23 21:20:08.949] mtd24 attached [2025-09-23 21:20:08.965] mtd32 attached [2025-09-23 21:20:09.013] RTNETLINK answers: File exists [2025-09-23 21:20:09.054] ubi0:animations is mounted. [2025-09-23 21:20:09.054] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:20:09.054] ubi1:textures is mounted. [2025-09-23 21:20:09.054] ubi2:dml_code is mounted. [2025-09-23 21:20:09.054] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:20:09.054] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:20:09.054] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:20:09.054] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:20:09.054] data.LB_FadeInType0=100 [2025-09-23 21:20:09.054] data.CHLH_FadeInType0=0 [2025-09-23 21:20:09.075] data.WU_FadeInDelay=0 [2025-09-23 21:20:09.075] max_time_out=0 [2025-09-23 21:20:09.075] No splash screen [2025-09-23 21:20:09.075] stop dss Done [2025-09-23 21:20:09.166] /dev/mem opened. [2025-09-23 21:20:09.166] Memory mapped at address 0xffff991be000. [2025-09-23 21:20:09.166] Read at address 0x00600018 (0xffff991be018): 0x00000000 [2025-09-23 21:20:09.166] Write at address 0x00600018 (0xffff991be018): 0x00400040, readback 0x00400040 [2025-09-23 21:20:09.166] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:20:09.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:20:09.294] Loaded PowerVR consumer services. [2025-09-23 21:20:09.422] Waiting data available... [2025-09-23 21:20:09.438] 512+0 records in [2025-09-23 21:20:09.438] 512+0 records out [2025-09-23 21:20:09.454] Starting syslogd/klogd: done [2025-09-23 21:20:09.486] DML Start [2025-09-23 21:20:09.662] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:20:09.870] DML res1: 0 [2025-09-23 21:20:10.280] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:20:10.280] Read Success [2025-09-23 21:20:10.280] Verifying certificate... [2025-09-23 21:20:10.520] Verified OK [2025-09-23 21:20:10.536] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:20:12.357] Verified OK [2025-09-23 21:20:12.357] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:20:12.917] Verified OK [2025-09-23 21:20:12.933] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:20:15.427] fs.protected_hardlinks = 1 [2025-09-23 21:20:15.427] fs.protected_symlinks = 1 [2025-09-23 21:20:15.443] kernel.modules_disabled = 1 [2025-09-23 21:20:15.618] [2025-09-23 21:20:15.618] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:20:16.921] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:20:24.669] SBL1:1210.0.1.0 [2025-09-23 21:20:24.701] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:20:26.284] SBL2:1210.0.1.0 [2025-09-23 21:20:26.315] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:20:26.428] j-A [2025-09-23 21:20:33.803] The R5 Autosar Classic is running [2025-09-23 21:20:33.803] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:20:33.803] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:20:34.410] INIT: version 2.96 booting [2025-09-23 21:20:34.523] INIT: Entering runlevel: 5 [2025-09-23 21:20:34.683] mtd32 attached [2025-09-23 21:20:34.683] mtd24 attached [2025-09-23 21:20:34.699] mtd28 attached [2025-09-23 21:20:34.746] ubi0:dml_code is mounted. [2025-09-23 21:20:34.746] RTNETLINK answers: File exists [2025-09-23 21:20:34.788] ubi1:textures is mounted. [2025-09-23 21:20:34.788] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:20:34.788] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:20:34.788] ubi2:animations is mounted. [2025-09-23 21:20:34.788] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:20:34.788] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:20:34.788] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:20:34.816] data.LB_FadeInType0=100 [2025-09-23 21:20:34.816] data.CHLH_FadeInType0=0 [2025-09-23 21:20:34.816] data.WU_FadeInDelay=0 [2025-09-23 21:20:34.816] max_time_out=0 [2025-09-23 21:20:34.816] No splash screen [2025-09-23 21:20:34.816] stop dss Done [2025-09-23 21:20:34.890] /dev/mem opened. [2025-09-23 21:20:34.890] Memory mapped at address 0xffffa5ad2000. [2025-09-23 21:20:34.890] Read at address 0x00600018 (0xffffa5ad2018): 0x00000000 [2025-09-23 21:20:34.890] Write at address 0x00600018 (0xffffa5ad2018): 0x00400040, readback 0x00400040 [2025-09-23 21:20:34.921] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:20:34.921] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:20:35.187] Loaded PowerVR consumer services. [2025-09-23 21:20:35.187] Waiting data available... [2025-09-23 21:20:35.203] 512+0 records in [2025-09-23 21:20:35.203] 512+0 records out [2025-09-23 21:20:35.219] Starting syslogd/klogd: done [2025-09-23 21:20:35.235] DML Start [2025-09-23 21:20:35.411] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:20:35.603] DML res1: 0 [2025-09-23 21:20:36.121] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:20:36.121] Read Success [2025-09-23 21:20:36.121] Verifying certificate... [2025-09-23 21:20:36.344] Verified OK [2025-09-23 21:20:36.360] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:20:37.959] Verified OK [2025-09-23 21:20:37.959] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:20:38.555] Verified OK [2025-09-23 21:20:38.555] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:20:41.239] fs.protected_hardlinks = 1 [2025-09-23 21:20:41.239] fs.protected_symlinks = 1 [2025-09-23 21:20:41.239] kernel.modules_disabled = 1 [2025-09-23 21:20:41.416] [2025-09-23 21:20:41.416] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:20:42.678] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:20:50.420] SBL1:1210.0.1.0 [2025-09-23 21:20:50.468] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:20:52.035] SBL2:1210.0.1.0 [2025-09-23 21:20:52.083] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:20:52.179] j-A [2025-09-23 21:20:59.535] The R5 Autosar Classic is running [2025-09-23 21:20:59.556] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:20:59.556] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:21:00.165] INIT: version 2.96 booting [2025-09-23 21:21:00.276] INIT: Entering runlevel: 5 [2025-09-23 21:21:00.437] mtd28 attached [2025-09-23 21:21:00.437] mtd32 attached [2025-09-23 21:21:00.453] mtd24 attached [2025-09-23 21:21:00.500] RTNETLINK answers: File exists [2025-09-23 21:21:00.500] ubi0:animations is mounted. [2025-09-23 21:21:00.568] ubi2:textures is mounted. [2025-09-23 21:21:00.568] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:21:00.568] ubi1:dml_code is mounted. [2025-09-23 21:21:00.568] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:21:00.568] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:21:00.568] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:21:00.568] data.LB_FadeInType0=100 [2025-09-23 21:21:00.568] data.CHLH_FadeInType0=0 [2025-09-23 21:21:00.568] data.WU_FadeInDelay=0 [2025-09-23 21:21:00.568] max_time_out=0 [2025-09-23 21:21:00.568] No splash screen [2025-09-23 21:21:00.568] stop dss Done [2025-09-23 21:21:00.568] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:21:00.651] /dev/mem opened. [2025-09-23 21:21:00.651] Memory mapped at address 0xffffb0c1e000. [2025-09-23 21:21:00.651] Read at address 0x00600018 (0xffffb0c1e018): 0x00000000 [2025-09-23 21:21:00.651] Write at address 0x00600018 (0xffffb0c1e018): 0x00400040, readback 0x00400040 [2025-09-23 21:21:00.651] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:21:00.651] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:21:00.842] Loaded PowerVR consumer services. [2025-09-23 21:21:00.938] Waiting data available... [2025-09-23 21:21:00.954] 512+0 records in [2025-09-23 21:21:00.954] 512+0 records out [2025-09-23 21:21:00.986] Starting syslogd/klogd: done [2025-09-23 21:21:01.002] DML Start [2025-09-23 21:21:01.178] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:21:01.433] DML res1: 0 [2025-09-23 21:21:01.769] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:21:01.790] Read Success [2025-09-23 21:21:01.790] Verifying certificate... [2025-09-23 21:21:02.014] Verified OK [2025-09-23 21:21:02.031] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:21:03.800] Verified OK [2025-09-23 21:21:03.800] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:21:04.365] Verified OK [2025-09-23 21:21:04.365] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:21:06.953] fs.protected_hardlinks = 1 [2025-09-23 21:21:06.953] fs.protected_symlinks = 1 [2025-09-23 21:21:06.953] kernel.modules_disabled = 1 [2025-09-23 21:21:07.129] [2025-09-23 21:21:07.129] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:21:08.520] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:21:16.151] SBL1:1210.0.1.0 [2025-09-23 21:21:16.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:21:17.765] SBL2:1210.0.1.0 [2025-09-23 21:21:17.813] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:21:17.926] j-A [2025-09-23 21:21:25.265] The R5 Autosar Classic is running [2025-09-23 21:21:25.296] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:21:25.296] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:21:25.904] INIT: version 2.96 booting [2025-09-23 21:21:26.015] INIT: Entering runlevel: 5 [2025-09-23 21:21:26.160] mtd24 attached [2025-09-23 21:21:26.176] mtd28 attached [2025-09-23 21:21:26.192] mtd32 attached [2025-09-23 21:21:26.208] ubi0:textures is mounted. [2025-09-23 21:21:26.240] ubi1:animations is mounted. [2025-09-23 21:21:26.240] RTNETLINK answers: File exists [2025-09-23 21:21:26.304] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:21:26.304] ubi2:dml_code is mounted. [2025-09-23 21:21:26.304] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:21:26.304] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:21:26.304] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:21:26.304] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:21:26.304] data.LB_FadeInType0=100 [2025-09-23 21:21:26.304] data.CHLH_FadeInType0=0 [2025-09-23 21:21:26.304] data.WU_FadeInDelay=0 [2025-09-23 21:21:26.304] max_time_out=0 [2025-09-23 21:21:26.304] No splash screen [2025-09-23 21:21:26.304] stop dss Done [2025-09-23 21:21:26.336] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:21:26.370] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:21:26.370] /dev/mem opened. [2025-09-23 21:21:26.370] Memory mapped at address 0xffffae180000. [2025-09-23 21:21:26.370] Read at address 0x00600018 (0xffffae180018): 0x00000000 [2025-09-23 21:21:26.370] Write at address 0x00600018 (0xffffae180018): 0x00400040, readback 0x00400040 [2025-09-23 21:21:26.529] Loaded PowerVR consumer services. [2025-09-23 21:21:26.642] Waiting data available... [2025-09-23 21:21:26.674] 512+0 records in [2025-09-23 21:21:26.674] 512+0 records out [2025-09-23 21:21:26.722] Starting syslogd/klogd: done [2025-09-23 21:21:26.722] DML Start [2025-09-23 21:21:26.898] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:21:27.138] DML res1: 0 [2025-09-23 21:21:27.577] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:21:27.577] Read Success [2025-09-23 21:21:27.577] Verifying certificate... [2025-09-23 21:21:27.833] Verified OK [2025-09-23 21:21:27.833] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:21:29.411] Verified OK [2025-09-23 21:21:29.411] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:21:30.049] Verified OK [2025-09-23 21:21:30.049] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:21:32.686] fs.protected_hardlinks = 1 [2025-09-23 21:21:32.702] fs.protected_symlinks = 1 [2025-09-23 21:21:32.702] kernel.modules_disabled = 1 [2025-09-23 21:21:32.895] [2025-09-23 21:21:32.895] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:21:34.154] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:21:41.900] SBL1:1210.0.1.0 [2025-09-23 21:21:41.948] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:21:43.515] SBL2:1210.0.1.0 [2025-09-23 21:21:43.563] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 21:21:43.659] j-A [2025-09-23 21:21:51.014] The R5 Autosar Classic is running [2025-09-23 21:21:51.035] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:21:51.035] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:21:51.642] INIT: version 2.96 booting [2025-09-23 21:21:51.755] INIT: Entering runlevel: 5 [2025-09-23 21:21:51.915] mtd24 attached [2025-09-23 21:21:51.930] mtd32 attached [2025-09-23 21:21:51.946] mtd28 attached [2025-09-23 21:21:51.962] ubi0:textures is mounted. [2025-09-23 21:21:51.979] ubi1:dml_code is mounted. [2025-09-23 21:21:51.995] RTNETLINK answers: File exists [2025-09-23 21:21:52.048] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:21:52.048] ubi2:animations is mounted. [2025-09-23 21:21:52.048] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:21:52.048] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:21:52.048] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:21:52.048] data.LB_FadeInType0=100 [2025-09-23 21:21:52.048] data.CHLH_FadeInType0=0 [2025-09-23 21:21:52.048] data.WU_FadeInDelay=0 [2025-09-23 21:21:52.048] max_time_out=0 [2025-09-23 21:21:52.048] No splash screen [2025-09-23 21:21:52.048] stop dss Done [2025-09-23 21:21:52.048] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:21:52.102] /dev/mem opened. [2025-09-23 21:21:52.102] Memory mapped at address 0xffffb107b000. [2025-09-23 21:21:52.102] Read at address 0x00600018 (0xffffb107b018): 0x00000000 [2025-09-23 21:21:52.102] Write at address 0x00600018 (0xffffb107b018): 0x00400040, readback 0x00400040 [2025-09-23 21:21:52.102] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:21:52.117] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:21:52.246] Loaded PowerVR consumer services. [2025-09-23 21:21:52.389] Waiting data available... [2025-09-23 21:21:52.405] 512+0 records in [2025-09-23 21:21:52.405] 512+0 records out [2025-09-23 21:21:52.454] Starting syslogd/klogd: done [2025-09-23 21:21:52.470] DML Start [2025-09-23 21:21:52.629] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:21:52.854] DML res1: 0 [2025-09-23 21:21:53.325] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:21:53.325] Read Success [2025-09-23 21:21:53.325] Verifying certificate... [2025-09-23 21:21:53.564] Verified OK [2025-09-23 21:21:53.580] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:21:55.195] Verified OK [2025-09-23 21:21:55.195] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:21:55.834] Verified OK [2025-09-23 21:21:55.834] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:21:58.409] fs.protected_hardlinks = 1 [2025-09-23 21:21:58.424] fs.protected_symlinks = 1 [2025-09-23 21:21:58.424] kernel.modules_disabled = 1 [2025-09-23 21:21:58.601] [2025-09-23 21:21:58.601] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:21:59.905] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:22:07.644] SBL1:1210.0.1.0 [2025-09-23 21:22:07.676] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:22:09.259] SBL2:1210.0.1.0 [2025-09-23 21:22:09.291] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:22:09.404] j-A [2025-09-23 21:22:16.778] The R5 Autosar Classic is running [2025-09-23 21:22:16.778] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:22:16.778] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:22:17.385] INIT: version 2.96 booting [2025-09-23 21:22:17.498] INIT: Entering runlevel: 5 [2025-09-23 21:22:17.657] mtd32 attached [2025-09-23 21:22:17.657] mtd28 attached [2025-09-23 21:22:17.673] mtd24 attached [2025-09-23 21:22:17.760] RTNETLINK answers: File exists [2025-09-23 21:22:17.760] ubi2:textures is mounted. [2025-09-23 21:22:17.760] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:22:17.760] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:22:17.760] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:22:17.760] ubi1:animations is mounted. [2025-09-23 21:22:17.760] ubi0:dml_code is mounted. [2025-09-23 21:22:17.760] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:22:17.760] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:22:17.781] data.LB_FadeInType0=100 [2025-09-23 21:22:17.781] data.CHLH_FadeInType0=0 [2025-09-23 21:22:17.781] data.WU_FadeInDelay=0 [2025-09-23 21:22:17.781] max_time_out=0 [2025-09-23 21:22:17.781] No splash screen [2025-09-23 21:22:17.781] stop dss Done [2025-09-23 21:22:17.814] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:22:17.830] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:22:17.879] /dev/mem opened. [2025-09-23 21:22:17.879] Memory mapped at address 0xffffba718000. [2025-09-23 21:22:17.879] Read at address 0x00600018 (0xffffba718018): 0x00000000 [2025-09-23 21:22:17.879] Write at address 0x00600018 (0xffffba718018): 0x00400040, readback 0x00400040 [2025-09-23 21:22:18.006] Loaded PowerVR consumer services. [2025-09-23 21:22:18.134] Waiting data available... [2025-09-23 21:22:18.134] 512+0 records in [2025-09-23 21:22:18.151] 512+0 records out [2025-09-23 21:22:18.183] Starting syslogd/klogd: done [2025-09-23 21:22:18.198] DML Start [2025-09-23 21:22:18.390] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:22:18.598] DML res1: 0 [2025-09-23 21:22:19.021] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:22:19.021] Read Success [2025-09-23 21:22:19.021] Verifying certificate... [2025-09-23 21:22:19.246] Verified OK [2025-09-23 21:22:19.262] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:22:20.925] Verified OK [2025-09-23 21:22:20.925] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:22:21.581] Verified OK [2025-09-23 21:22:21.581] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:22:24.220] fs.protected_hardlinks = 1 [2025-09-23 21:22:24.220] fs.protected_symlinks = 1 [2025-09-23 21:22:24.235] kernel.modules_disabled = 1 [2025-09-23 21:22:24.427] [2025-09-23 21:22:24.427] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:22:25.639] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:22:33.382] SBL1:1210.0.1.0 [2025-09-23 21:22:33.430] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:22:34.997] SBL2:1210.0.1.0 [2025-09-23 21:22:35.045] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 21:22:35.157] j-A [2025-09-23 21:22:42.495] The R5 Autosar Classic is running [2025-09-23 21:22:42.526] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:22:42.526] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:22:43.133] INIT: version 2.96 booting [2025-09-23 21:22:43.245] INIT: Entering runlevel: 5 [2025-09-23 21:22:43.389] mtd28 attached [2025-09-23 21:22:43.405] mtd24 attached [2025-09-23 21:22:43.421] mtd32 attached [2025-09-23 21:22:43.437] ubi0:animations is mounted. [2025-09-23 21:22:43.521] RTNETLINK answers: File exists [2025-09-23 21:22:43.521] ubi1:textures is mounted. [2025-09-23 21:22:43.521] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:22:43.521] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:22:43.521] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:22:43.521] ubi2:dml_code is mounted. [2025-09-23 21:22:43.521] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:22:43.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:22:43.521] data.LB_FadeInType0=100 [2025-09-23 21:22:43.521] data.CHLH_FadeInType0=0 [2025-09-23 21:22:43.521] data.WU_FadeInDelay=0 [2025-09-23 21:22:43.521] max_time_out=0 [2025-09-23 21:22:43.521] No splash screen [2025-09-23 21:22:43.521] stop dss Done [2025-09-23 21:22:43.600] /dev/mem opened. [2025-09-23 21:22:43.600] Memory mapped at address 0xffffb4c03000. [2025-09-23 21:22:43.600] Read at address 0x00600018 (0xffffb4c03018): 0x00000000 [2025-09-23 21:22:43.600] Write at address 0x00600018 (0xffffb4c03018): 0x00400040, readback 0x00400040 [2025-09-23 21:22:43.600] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:22:43.600] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:22:43.824] Loaded PowerVR consumer services. [2025-09-23 21:22:43.872] Waiting data available... [2025-09-23 21:22:43.888] 512+0 records in [2025-09-23 21:22:43.888] 512+0 records out [2025-09-23 21:22:43.921] Starting syslogd/klogd: done [2025-09-23 21:22:43.937] DML Start [2025-09-23 21:22:44.112] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:22:44.336] DML res1: 0 [2025-09-23 21:22:44.811] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:22:44.811] Read Success [2025-09-23 21:22:44.811] Verifying certificate... [2025-09-23 21:22:45.051] Verified OK [2025-09-23 21:22:45.067] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:22:46.836] Verified OK [2025-09-23 21:22:46.836] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:22:47.421] Verified OK [2025-09-23 21:22:47.421] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:22:49.884] fs.protected_hardlinks = 1 [2025-09-23 21:22:49.914] fs.protected_symlinks = 1 [2025-09-23 21:22:49.914] kernel.modules_disabled = 1 [2025-09-23 21:22:50.106] [2025-09-23 21:22:50.106] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:22:51.376] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:22:59.132] SBL1:1210.0.1.0 [2025-09-23 21:22:59.180] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:23:00.747] SBL2:1210.0.1.0 [2025-09-23 21:23:00.794] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:23:00.891] j-A [2025-09-23 21:23:08.245] The R5 Autosar Classic is running [2025-09-23 21:23:08.269] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:23:08.269] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:23:08.876] INIT: version 2.96 booting [2025-09-23 21:23:08.988] INIT: Entering runlevel: 5 [2025-09-23 21:23:09.148] mtd28 attached [2025-09-23 21:23:09.164] mtd24 attached [2025-09-23 21:23:09.164] mtd32 attached [2025-09-23 21:23:09.196] ubi0:animations is mounted. [2025-09-23 21:23:09.275] RTNETLINK answers: File exists [2025-09-23 21:23:09.275] ubi1:textures is mounted. [2025-09-23 21:23:09.275] ubi2:dml_code is mounted. [2025-09-23 21:23:09.275] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:23:09.275] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:23:09.275] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:23:09.275] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:23:09.275] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:23:09.275] data.LB_FadeInType0=100 [2025-09-23 21:23:09.275] data.CHLH_FadeInType0=0 [2025-09-23 21:23:09.275] data.WU_FadeInDelay=0 [2025-09-23 21:23:09.275] max_time_out=0 [2025-09-23 21:23:09.275] No splash screen [2025-09-23 21:23:09.275] stop dss Done [2025-09-23 21:23:09.343] /dev/mem opened. [2025-09-23 21:23:09.343] Memory mapped at address 0xffffad178000. [2025-09-23 21:23:09.343] Read at address 0x00600018 (0xffffad178018): 0x00000000 [2025-09-23 21:23:09.343] Write at address 0x00600018 (0xffffad178018): 0x00400040, readback 0x00400040 [2025-09-23 21:23:09.360] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:23:09.360] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:23:09.637] Loaded PowerVR consumer services. [2025-09-23 21:23:09.637] Waiting data available... [2025-09-23 21:23:09.653] 512+0 records in [2025-09-23 21:23:09.669] 512+0 records out [2025-09-23 21:23:09.701] Starting syslogd/klogd: done [2025-09-23 21:23:09.717] DML Start [2025-09-23 21:23:09.893] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:23:10.102] DML res1: 0 [2025-09-23 21:23:10.609] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:23:10.609] Read Success [2025-09-23 21:23:10.609] Verifying certificate... [2025-09-23 21:23:10.849] Verified OK [2025-09-23 21:23:10.881] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:23:12.590] Verified OK [2025-09-23 21:23:12.590] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:23:13.116] Verified OK [2025-09-23 21:23:13.116] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:23:15.656] fs.protected_hardlinks = 1 [2025-09-23 21:23:15.656] fs.protected_symlinks = 1 [2025-09-23 21:23:15.656] kernel.modules_disabled = 1 [2025-09-23 21:23:15.849] [2025-09-23 21:23:15.849] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:23:17.141] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:23:24.871] SBL1:1210.0.1.0 [2025-09-23 21:23:24.919] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:23:26.486] SBL2:1210.0.1.0 [2025-09-23 21:23:26.533] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:23:26.629] j-A [2025-09-23 21:23:33.983] The R5 Autosar Classic is running [2025-09-23 21:23:34.007] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:23:34.007] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:23:34.615] INIT: version 2.96 booting [2025-09-23 21:23:34.726] INIT: Entering runlevel: 5 [2025-09-23 21:23:34.886] mtd32 attached [2025-09-23 21:23:34.886] mtd24 attached [2025-09-23 21:23:34.902] mtd28 attached [2025-09-23 21:23:34.934] ubi0:dml_code is mounted. [2025-09-23 21:23:34.950] ubi1:textures is mounted. [2025-09-23 21:23:34.950] RTNETLINK answers: File exists [2025-09-23 21:23:34.986] ubi2:animations is mounted. [2025-09-23 21:23:34.986] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:23:34.986] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:23:34.986] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:23:34.986] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:23:35.018] data.LB_FadeInType0=100 [2025-09-23 21:23:35.018] data.CHLH_FadeInType0=0 [2025-09-23 21:23:35.018] data.WU_FadeInDelay=0 [2025-09-23 21:23:35.018] max_time_out=0 [2025-09-23 21:23:35.018] No splash screen [2025-09-23 21:23:35.018] stop dss Done [2025-09-23 21:23:35.018] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:23:35.099] /dev/mem opened. [2025-09-23 21:23:35.099] Memory mapped at address 0xffff96167000. [2025-09-23 21:23:35.099] Read at address 0x00600018 (0xffff96167018): 0x00000000 [2025-09-23 21:23:35.099] Write at address 0x00600018 (0xffff96167018): 0x00400040, readback 0x00400040 [2025-09-23 21:23:35.099] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:23:35.099] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:23:35.307] Loaded PowerVR consumer services. [2025-09-23 21:23:35.370] Waiting data available... [2025-09-23 21:23:35.398] 512+0 records in [2025-09-23 21:23:35.398] 512+0 records out [2025-09-23 21:23:35.414] Starting syslogd/klogd: done [2025-09-23 21:23:35.430] DML Start [2025-09-23 21:23:35.575] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:23:35.799] DML res1: 0 [2025-09-23 21:23:36.320] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:23:36.320] Read Success [2025-09-23 21:23:36.320] Verifying certificate... [2025-09-23 21:23:36.560] Verified OK [2025-09-23 21:23:36.576] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:23:38.190] Verified OK [2025-09-23 21:23:38.206] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:23:38.868] Verified OK [2025-09-23 21:23:38.868] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:23:41.474] fs.protected_hardlinks = 1 [2025-09-23 21:23:41.474] fs.protected_symlinks = 1 [2025-09-23 21:23:41.489] kernel.modules_disabled = 1 [2025-09-23 21:23:41.682] [2025-09-23 21:23:41.682] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:23:42.872] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:23:50.614] SBL1:1210.0.1.0 [2025-09-23 21:23:50.646] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:23:52.228] SBL2:1210.0.1.0 [2025-09-23 21:23:52.260] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:23:52.373] j-A [2025-09-23 21:23:59.727] The R5 Autosar Classic is running [2025-09-23 21:23:59.727] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:23:59.748] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:24:00.356] INIT: version 2.96 booting [2025-09-23 21:24:00.468] INIT: Entering runlevel: 5 [2025-09-23 21:24:00.628] mtd24 attached [2025-09-23 21:24:00.628] mtd32 attached [2025-09-23 21:24:00.644] mtd28 attached [2025-09-23 21:24:00.676] ubi0:textures is mounted. [2025-09-23 21:24:00.692] RTNETLINK answers: File exists [2025-09-23 21:24:00.755] ubi1:dml_code is mounted. [2025-09-23 21:24:00.755] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:24:00.755] ubi2:animations is mounted. [2025-09-23 21:24:00.755] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:24:00.755] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:24:00.755] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:24:00.755] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:24:00.755] data.LB_FadeInType0=100 [2025-09-23 21:24:00.755] data.CHLH_FadeInType0=0 [2025-09-23 21:24:00.755] data.WU_FadeInDelay=0 [2025-09-23 21:24:00.755] max_time_out=0 [2025-09-23 21:24:00.755] No splash screen [2025-09-23 21:24:00.755] stop dss Done [2025-09-23 21:24:00.827] /dev/mem opened. [2025-09-23 21:24:00.827] Memory mapped at address 0xffffafe30000. [2025-09-23 21:24:00.827] Read at address 0x00600018 (0xffffafe30018): 0x00000000 [2025-09-23 21:24:00.827] Write at address 0x00600018 (0xffffafe30018): 0x00400040, readback 0x00400040 [2025-09-23 21:24:00.827] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:24:00.843] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:24:00.986] Loaded PowerVR consumer services. [2025-09-23 21:24:01.098] Waiting data available... [2025-09-23 21:24:01.098] 512+0 records in [2025-09-23 21:24:01.098] 512+0 records out [2025-09-23 21:24:01.162] Starting syslogd/klogd: done [2025-09-23 21:24:01.178] DML Start [2025-09-23 21:24:01.370] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:24:01.594] DML res1: 0 [2025-09-23 21:24:02.033] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:24:02.033] Read Success [2025-09-23 21:24:02.033] Verifying certificate... [2025-09-23 21:24:02.336] Verified OK [2025-09-23 21:24:02.368] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:24:04.053] Verified OK [2025-09-23 21:24:04.053] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:24:04.581] Verified OK [2025-09-23 21:24:04.597] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:24:07.123] fs.protected_hardlinks = 1 [2025-09-23 21:24:07.138] fs.protected_symlinks = 1 [2025-09-23 21:24:07.138] kernel.modules_disabled = 1 [2025-09-23 21:24:07.314] [2025-09-23 21:24:07.314] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:24:08.621] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:24:16.352] SBL1:1210.0.1.0 [2025-09-23 21:24:16.384] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:24:17.966] SBL2:1210.0.1.0 [2025-09-23 21:24:17.998] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:24:18.111] j-A [2025-09-23 21:24:25.486] The R5 Autosar Classic is running [2025-09-23 21:24:25.486] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:24:25.486] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:24:26.078] INIT: version 2.96 booting [2025-09-23 21:24:26.189] INIT: Entering runlevel: 5 [2025-09-23 21:24:26.349] mtd24 attached [2025-09-23 21:24:26.365] mtd28 attached [2025-09-23 21:24:26.365] mtd32 attached [2025-09-23 21:24:26.413] RTNETLINK answers: File exists [2025-09-23 21:24:26.485] ubi0:textures is mounted. [2025-09-23 21:24:26.485] ubi1:animations is mounted. [2025-09-23 21:24:26.485] ubi2:dml_code is mounted. [2025-09-23 21:24:26.485] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:24:26.485] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:24:26.485] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:24:26.485] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:24:26.485] data.LB_FadeInType0=100 [2025-09-23 21:24:26.485] data.CHLH_FadeInType0=0 [2025-09-23 21:24:26.485] data.WU_FadeInDelay=0 [2025-09-23 21:24:26.485] max_time_out=0 [2025-09-23 21:24:26.485] No splash screen [2025-09-23 21:24:26.485] stop dss Done [2025-09-23 21:24:26.485] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:24:26.552] /dev/mem opened. [2025-09-23 21:24:26.552] Memory mapped at address 0xffffa2c8b000. [2025-09-23 21:24:26.552] Read at address 0x00600018 (0xffffa2c8b018): 0x00000000 [2025-09-23 21:24:26.552] Write at address 0x00600018 (0xffffa2c8b018): 0x00400040, readback 0x00400040 [2025-09-23 21:24:26.576] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:24:26.576] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:24:26.656] Loaded PowerVR consumer services. [2025-09-23 21:24:26.815] Waiting data available... [2025-09-23 21:24:26.831] 512+0 records in [2025-09-23 21:24:26.831] 512+0 records out [2025-09-23 21:24:26.879] Starting syslogd/klogd: done [2025-09-23 21:24:26.895] DML Start [2025-09-23 21:24:27.087] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:24:27.295] DML res1: 0 [2025-09-23 21:24:27.695] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:24:27.711] Read Success [2025-09-23 21:24:27.711] Verifying certificate... [2025-09-23 21:24:27.935] Verified OK [2025-09-23 21:24:27.935] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:24:29.790] Verified OK [2025-09-23 21:24:29.790] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:24:30.349] Verified OK [2025-09-23 21:24:30.349] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:24:32.859] fs.protected_hardlinks = 1 [2025-09-23 21:24:32.859] fs.protected_symlinks = 1 [2025-09-23 21:24:32.874] kernel.modules_disabled = 1 [2025-09-23 21:24:33.066] [2025-09-23 21:24:33.066] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:24:34.393] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:24:42.086] SBL1:1210.0.1.0 [2025-09-23 21:24:42.134] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:24:43.701] SBL2:1210.0.1.0 [2025-09-23 21:24:43.748] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:24:43.860] j-A [2025-09-23 21:24:51.200] The R5 Autosar Classic is running [2025-09-23 21:24:51.232] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:24:51.232] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:24:51.839] INIT: version 2.96 booting [2025-09-23 21:24:51.951] INIT: Entering runlevel: 5 [2025-09-23 21:24:52.095] mtd24 attached [2025-09-23 21:24:52.110] mtd28 attached [2025-09-23 21:24:52.110] mtd32 attached [2025-09-23 21:24:52.227] RTNETLINK answers: File exists [2025-09-23 21:24:52.227] ubi1:animations is mounted. [2025-09-23 21:24:52.227] ubi0:textures is mounted. [2025-09-23 21:24:52.227] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:24:52.227] ubi2:dml_code is mounted. [2025-09-23 21:24:52.227] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:24:52.227] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:24:52.227] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:24:52.227] data.LB_FadeInType0=100 [2025-09-23 21:24:52.227] data.CHLH_FadeInType0=0 [2025-09-23 21:24:52.227] data.WU_FadeInDelay=0 [2025-09-23 21:24:52.227] max_time_out=0 [2025-09-23 21:24:52.227] No splash screen [2025-09-23 21:24:52.227] stop dss Done [2025-09-23 21:24:52.227] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:24:52.307] /dev/mem opened. [2025-09-23 21:24:52.307] Memory mapped at address 0xffff96c1b000. [2025-09-23 21:24:52.307] Read at address 0x00600018 (0xffff96c1b018): 0x00000000 [2025-09-23 21:24:52.307] Write at address 0x00600018 (0xffff96c1b018): 0x00400040, readback 0x00400040 [2025-09-23 21:24:52.307] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:24:52.307] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:24:52.563] Loaded PowerVR consumer services. [2025-09-23 21:24:52.611] Waiting data available... [2025-09-23 21:24:52.626] 512+0 records in [2025-09-23 21:24:52.642] 512+0 records out [2025-09-23 21:24:52.658] Starting syslogd/klogd: done [2025-09-23 21:24:52.674] DML Start [2025-09-23 21:24:52.850] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:24:53.074] DML res1: 0 [2025-09-23 21:24:53.479] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:24:53.479] Read Success [2025-09-23 21:24:53.479] Verifying certificate... [2025-09-23 21:24:53.734] Verified OK [2025-09-23 21:24:53.750] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:24:55.349] Verified OK [2025-09-23 21:24:55.349] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:24:56.016] Verified OK [2025-09-23 21:24:56.016] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:24:58.542] fs.protected_hardlinks = 1 [2025-09-23 21:24:58.558] fs.protected_symlinks = 1 [2025-09-23 21:24:58.558] kernel.modules_disabled = 1 [2025-09-23 21:24:58.766] [2025-09-23 21:24:58.766] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:25:00.148] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:25:07.825] SBL1:1210.0.1.0 [2025-09-23 21:25:07.857] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:25:09.440] SBL2:1210.0.1.0 [2025-09-23 21:25:09.488] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:25:09.584] j-A [2025-09-23 21:25:16.939] The R5 Autosar Classic is running [2025-09-23 21:25:16.939] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:25:16.960] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:25:17.569] INIT: version 2.96 booting [2025-09-23 21:25:17.680] INIT: Entering runlevel: 5 [2025-09-23 21:25:17.824] mtd24 attached [2025-09-23 21:25:17.840] mtd28 attached [2025-09-23 21:25:17.856] mtd32 attached [2025-09-23 21:25:17.959] RTNETLINK answers: File exists [2025-09-23 21:25:17.959] ubi0:textures is mounted. [2025-09-23 21:25:17.959] ubi1:animations is mounted. [2025-09-23 21:25:17.959] ubi2:dml_code is mounted. [2025-09-23 21:25:17.959] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:25:17.959] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:25:17.959] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:25:17.959] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:25:17.959] data.LB_FadeInType0=100 [2025-09-23 21:25:17.959] data.CHLH_FadeInType0=0 [2025-09-23 21:25:17.959] data.WU_FadeInDelay=0 [2025-09-23 21:25:17.959] max_time_out=0 [2025-09-23 21:25:17.959] No splash screen [2025-09-23 21:25:17.959] stop dss Done [2025-09-23 21:25:17.959] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:25:18.042] /dev/mem opened. [2025-09-23 21:25:18.042] Memory mapped at address 0xffff92e81000. [2025-09-23 21:25:18.042] Read at address 0x00600018 (0xffff92e81018): 0x00000000 [2025-09-23 21:25:18.042] Write at address 0x00600018 (0xffff92e81018): 0x00400040, readback 0x00400040 [2025-09-23 21:25:18.042] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:25:18.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:25:18.186] Loaded PowerVR consumer services. [2025-09-23 21:25:18.282] Waiting data available... [2025-09-23 21:25:18.313] 512+0 records in [2025-09-23 21:25:18.313] 512+0 records out [2025-09-23 21:25:18.362] Starting syslogd/klogd: done [2025-09-23 21:25:18.378] DML Start [2025-09-23 21:25:18.537] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:25:18.777] DML res1: 0 [2025-09-23 21:25:19.162] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:25:19.177] Read Success [2025-09-23 21:25:19.177] Verifying certificate... [2025-09-23 21:25:19.402] Verified OK [2025-09-23 21:25:19.433] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:25:20.980] Verified OK [2025-09-23 21:25:20.980] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:25:21.604] Verified OK [2025-09-23 21:25:21.604] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:25:24.354] fs.protected_hardlinks = 1 [2025-09-23 21:25:24.354] fs.protected_symlinks = 1 [2025-09-23 21:25:24.370] kernel.modules_disabled = 1 [2025-09-23 21:25:24.561] [2025-09-23 21:25:24.561] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:25:25.809] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:25:33.568] SBL1:1210.0.1.0 [2025-09-23 21:25:33.616] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:25:35.183] SBL2:1210.0.1.0 [2025-09-23 21:25:35.231] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:25:35.344] j-A [2025-09-23 21:25:42.715] The R5 Autosar Classic is running [2025-09-23 21:25:42.715] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:25:42.715] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:25:43.323] INIT: version 2.96 booting [2025-09-23 21:25:43.434] INIT: Entering runlevel: 5 [2025-09-23 21:25:43.594] mtd28 attached [2025-09-23 21:25:43.594] mtd24 attached [2025-09-23 21:25:43.610] mtd32 attached [2025-09-23 21:25:43.658] ubi0:animations is mounted. [2025-09-23 21:25:43.658] RTNETLINK answers: File exists [2025-09-23 21:25:43.720] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:25:43.720] ubi1:textures is mounted. [2025-09-23 21:25:43.720] ubi2:dml_code is mounted. [2025-09-23 21:25:43.720] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:25:43.720] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:25:43.720] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:25:43.720] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:25:43.720] data.LB_FadeInType0=100 [2025-09-23 21:25:43.720] data.CHLH_FadeInType0=0 [2025-09-23 21:25:43.720] data.WU_FadeInDelay=0 [2025-09-23 21:25:43.720] max_time_out=0 [2025-09-23 21:25:43.720] No splash screen [2025-09-23 21:25:43.720] stop dss Done [2025-09-23 21:25:43.762] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:25:43.762] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:25:43.762] /dev/mem opened. [2025-09-23 21:25:43.762] Memory mapped at address 0xffff89ab9000. [2025-09-23 21:25:43.788] Read at address 0x00600018 (0xffff89ab9018): 0x00000000 [2025-09-23 21:25:43.788] Write at address 0x00600018 (0xffff89ab9018): 0x00400040, readback 0x00400040 [2025-09-23 21:25:43.949] Loaded PowerVR consumer services. [2025-09-23 21:25:44.076] Waiting data available... [2025-09-23 21:25:44.092] 512+0 records in [2025-09-23 21:25:44.092] 512+0 records out [2025-09-23 21:25:44.124] Starting syslogd/klogd: done [2025-09-23 21:25:44.140] DML Start [2025-09-23 21:25:44.300] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:25:44.507] DML res1: 0 [2025-09-23 21:25:45.008] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:25:45.008] Read Success [2025-09-23 21:25:45.008] Verifying certificate... [2025-09-23 21:25:45.249] Verified OK [2025-09-23 21:25:45.281] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:25:46.948] Verified OK [2025-09-23 21:25:46.948] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:25:47.588] Verified OK [2025-09-23 21:25:47.604] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:25:50.226] fs.protected_hardlinks = 1 [2025-09-23 21:25:50.226] fs.protected_symlinks = 1 [2025-09-23 21:25:50.242] kernel.modules_disabled = 1 [2025-09-23 21:25:50.434] [2025-09-23 21:25:50.434] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:25:51.579] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:25:59.338] SBL1:1210.0.1.0 [2025-09-23 21:25:59.370] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:26:00.952] SBL2:1210.0.1.0 [2025-09-23 21:26:00.984] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:26:01.096] j-A [2025-09-23 21:26:08.469] The R5 Autosar Classic is running [2025-09-23 21:26:08.469] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:26:08.469] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:26:09.077] INIT: version 2.96 booting [2025-09-23 21:26:09.190] INIT: Entering runlevel: 5 [2025-09-23 21:26:09.333] mtd24 attached [2025-09-23 21:26:09.349] mtd28 attached [2025-09-23 21:26:09.365] mtd32 attached [2025-09-23 21:26:09.397] ubi0:textures is mounted. [2025-09-23 21:26:09.413] ubi1:animations is mounted. [2025-09-23 21:26:09.413] RTNETLINK answers: File exists [2025-09-23 21:26:09.429] ubi2:dml_code is mounted. [2025-09-23 21:26:09.465] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:26:09.465] data.LB_FadeInType0=100 [2025-09-23 21:26:09.465] data.CHLH_FadeInType0=0 [2025-09-23 21:26:09.465] data.WU_FadeInDelay=0 [2025-09-23 21:26:09.465] max_time_out=0 [2025-09-23 21:26:09.465] No splash screen [2025-09-23 21:26:09.465] stop dss Done [2025-09-23 21:26:09.465] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:26:09.481] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:26:09.496] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:26:09.534] /dev/mem opened. [2025-09-23 21:26:09.534] Memory mapped at address 0xffffb6b95000. [2025-09-23 21:26:09.534] Read at address 0x00600018 (0xffffb6b95018): 0x00000000 [2025-09-23 21:26:09.534] Write at address 0x00600018 (0xffffb6b95018): 0x00400040, readback 0x00400040 [2025-09-23 21:26:09.534] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:26:09.582] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:26:09.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:26:09.662] Loaded PowerVR consumer services. [2025-09-23 21:26:09.806] Waiting data available... [2025-09-23 21:26:09.822] 512+0 records in [2025-09-23 21:26:09.822] 512+0 records out [2025-09-23 21:26:09.854] Starting syslogd/klogd: done [2025-09-23 21:26:09.870] DML Start [2025-09-23 21:26:10.030] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:26:10.269] DML res1: 0 [2025-09-23 21:26:10.710] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:26:10.710] Read Success [2025-09-23 21:26:10.710] Verifying certificate... [2025-09-23 21:26:10.997] Verified OK [2025-09-23 21:26:11.013] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:26:12.753] Verified OK [2025-09-23 21:26:12.753] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:26:13.334] Verified OK [2025-09-23 21:26:13.334] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:26:15.828] fs.protected_hardlinks = 1 [2025-09-23 21:26:15.844] fs.protected_symlinks = 1 [2025-09-23 21:26:15.844] kernel.modules_disabled = 1 [2025-09-23 21:26:16.035] [2025-09-23 21:26:16.035] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:26:17.294] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:26:25.058] SBL1:1210.0.1.0 [2025-09-23 21:26:25.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:26:26.674] SBL2:1210.0.1.0 [2025-09-23 21:26:26.721] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:26:26.817] j-A [2025-09-23 21:26:34.171] The R5 Autosar Classic is running [2025-09-23 21:26:34.192] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:26:34.192] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:26:34.800] INIT: version 2.96 booting [2025-09-23 21:26:34.911] INIT: Entering runlevel: 5 [2025-09-23 21:26:35.072] mtd32 attached [2025-09-23 21:26:35.072] mtd24 attached [2025-09-23 21:26:35.088] mtd28 attached [2025-09-23 21:26:35.120] ubi0:dml_code is mounted. [2025-09-23 21:26:35.200] RTNETLINK answers: File exists [2025-09-23 21:26:35.200] ubi1:textures is mounted. [2025-09-23 21:26:35.200] ubi2:animations is mounted. [2025-09-23 21:26:35.200] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:26:35.200] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:26:35.200] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:26:35.200] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:26:35.200] data.LB_FadeInType0=100 [2025-09-23 21:26:35.200] data.CHLH_FadeInType0=0 [2025-09-23 21:26:35.200] data.WU_FadeInDelay=0 [2025-09-23 21:26:35.200] max_time_out=0 [2025-09-23 21:26:35.200] No splash screen [2025-09-23 21:26:35.200] stop dss Done [2025-09-23 21:26:35.200] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:26:35.280] /dev/mem opened. [2025-09-23 21:26:35.280] Memory mapped at address 0xffffb6b03000. [2025-09-23 21:26:35.280] Read at address 0x00600018 (0xffffb6b03018): 0x00000000 [2025-09-23 21:26:35.280] Write at address 0x00600018 (0xffffb6b03018): 0x00400040, readback 0x00400040 [2025-09-23 21:26:35.280] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:26:35.296] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:26:35.441] Loaded PowerVR consumer services. [2025-09-23 21:26:35.552] Waiting data available... [2025-09-23 21:26:35.568] 512+0 records in [2025-09-23 21:26:35.568] 512+0 records out [2025-09-23 21:26:35.584] Starting syslogd/klogd: done [2025-09-23 21:26:35.616] DML Start [2025-09-23 21:26:35.777] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:26:36.000] DML res1: 0 [2025-09-23 21:26:36.447] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:26:36.447] Read Success [2025-09-23 21:26:36.447] Verifying certificate... [2025-09-23 21:26:36.751] Verified OK [2025-09-23 21:26:36.767] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:26:38.366] Verified OK [2025-09-23 21:26:38.366] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:26:38.910] Verified OK [2025-09-23 21:26:38.910] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:26:41.580] fs.protected_hardlinks = 1 [2025-09-23 21:26:41.612] fs.protected_symlinks = 1 [2025-09-23 21:26:41.612] kernel.modules_disabled = 1 [2025-09-23 21:26:41.787] [2025-09-23 21:26:41.787] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:26:43.034] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:26:50.787] SBL1:1210.0.1.0 [2025-09-23 21:26:50.819] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:26:52.403] SBL2:1210.0.1.0 [2025-09-23 21:26:52.434] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:26:52.546] j-A [2025-09-23 21:26:59.919] The R5 Autosar Classic is running [2025-09-23 21:26:59.919] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:26:59.919] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:27:00.527] INIT: version 2.96 booting [2025-09-23 21:27:00.639] INIT: Entering runlevel: 5 [2025-09-23 21:27:00.799] mtd28 attached [2025-09-23 21:27:00.815] mtd32 attached [2025-09-23 21:27:00.815] mtd24 attached [2025-09-23 21:27:00.831] ubi0:animations is mounted. [2025-09-23 21:27:00.863] RTNETLINK answers: File exists [2025-09-23 21:27:00.879] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:27:00.879] ubi2:textures is mounted. [2025-09-23 21:27:00.911] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:27:00.911] ubi1:dml_code is mounted. [2025-09-23 21:27:00.911] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:27:00.911] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:27:00.911] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:27:00.936] data.LB_FadeInType0=100 [2025-09-23 21:27:00.936] data.CHLH_FadeInType0=0 [2025-09-23 21:27:00.936] data.WU_FadeInDelay=0 [2025-09-23 21:27:00.936] max_time_out=0 [2025-09-23 21:27:00.936] No splash screen [2025-09-23 21:27:00.936] stop dss Done [2025-09-23 21:27:00.952] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:27:00.968] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:27:00.984] /dev/mem opened. [2025-09-23 21:27:00.984] Memory mapped at address 0xffff8ba1f000. [2025-09-23 21:27:01.010] Read at address 0x00600018 (0xffff8ba1f018): 0x00000000 [2025-09-23 21:27:01.010] Write at address 0x00600018 (0xffff8ba1f018): 0x00400040, readback 0x00400040 [2025-09-23 21:27:01.202] Loaded PowerVR consumer services. [2025-09-23 21:27:01.281] Waiting data available... [2025-09-23 21:27:01.297] 512+0 records in [2025-09-23 21:27:01.297] 512+0 records out [2025-09-23 21:27:01.313] Starting syslogd/klogd: done [2025-09-23 21:27:01.345] DML Start [2025-09-23 21:27:01.506] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:27:01.729] DML res1: 0 [2025-09-23 21:27:02.225] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:27:02.241] Read Success [2025-09-23 21:27:02.241] Verifying certificate... [2025-09-23 21:27:02.512] Verified OK [2025-09-23 21:27:02.545] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:27:04.191] Verified OK [2025-09-23 21:27:04.191] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:27:04.765] Verified OK [2025-09-23 21:27:04.765] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:27:07.308] fs.protected_hardlinks = 1 [2025-09-23 21:27:07.308] fs.protected_symlinks = 1 [2025-09-23 21:27:07.324] kernel.modules_disabled = 1 [2025-09-23 21:27:07.532] [2025-09-23 21:27:07.532] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:27:08.756] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:27:16.514] SBL1:1210.0.1.0 [2025-09-23 21:27:16.562] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:27:18.129] SBL2:1210.0.1.0 [2025-09-23 21:27:18.177] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:27:18.273] j-A [2025-09-23 21:27:25.628] The R5 Autosar Classic is running [2025-09-23 21:27:25.653] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:27:25.653] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:27:26.260] INIT: version 2.96 booting [2025-09-23 21:27:26.371] INIT: Entering runlevel: 5 [2025-09-23 21:27:26.532] mtd32 attached [2025-09-23 21:27:26.532] mtd24 attached [2025-09-23 21:27:26.548] mtd28 attached [2025-09-23 21:27:26.648] RTNETLINK answers: File exists [2025-09-23 21:27:26.648] ubi0:dml_code is mounted. [2025-09-23 21:27:26.648] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:27:26.648] ubi2:animations is mounted. [2025-09-23 21:27:26.648] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:27:26.648] ubi1:textures is mounted. [2025-09-23 21:27:26.648] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:27:26.648] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:27:26.648] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:27:26.648] data.LB_FadeInType0=100 [2025-09-23 21:27:26.648] data.CHLH_FadeInType0=0 [2025-09-23 21:27:26.648] data.WU_FadeInDelay=0 [2025-09-23 21:27:26.648] max_time_out=0 [2025-09-23 21:27:26.648] No splash screen [2025-09-23 21:27:26.648] stop dss Done [2025-09-23 21:27:26.663] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:27:26.679] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:27:26.733] /dev/mem opened. [2025-09-23 21:27:26.733] Memory mapped at address 0xffffa0363000. [2025-09-23 21:27:26.733] Read at address 0x00600018 (0xffffa0363018): 0x00000000 [2025-09-23 21:27:26.733] Write at address 0x00600018 (0xffffa0363018): 0x00400040, readback 0x00400040 [2025-09-23 21:27:26.797] Loaded PowerVR consumer services. [2025-09-23 21:27:26.989] Waiting data available... [2025-09-23 21:27:27.005] 512+0 records in [2025-09-23 21:27:27.005] 512+0 records out [2025-09-23 21:27:27.053] Starting syslogd/klogd: done [2025-09-23 21:27:27.069] DML Start [2025-09-23 21:27:27.245] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:27:27.469] DML res1: 0 [2025-09-23 21:27:27.884] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:27:27.905] Read Success [2025-09-23 21:27:27.905] Verifying certificate... [2025-09-23 21:27:28.178] Verified OK [2025-09-23 21:27:28.194] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:27:29.952] Verified OK [2025-09-23 21:27:29.968] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:27:30.550] Verified OK [2025-09-23 21:27:30.550] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:27:33.109] fs.protected_hardlinks = 1 [2025-09-23 21:27:33.125] fs.protected_symlinks = 1 [2025-09-23 21:27:33.141] kernel.modules_disabled = 1 [2025-09-23 21:27:33.317] [2025-09-23 21:27:33.317] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:27:34.525] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:27:42.245] SBL1:1210.0.1.0 [2025-09-23 21:27:42.293] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:27:43.860] SBL2:1210.0.1.0 [2025-09-23 21:27:43.908] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:27:44.003] j-A [2025-09-23 21:27:51.357] The R5 Autosar Classic is running [2025-09-23 21:27:51.380] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:27:51.380] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:27:51.989] INIT: version 2.96 booting [2025-09-23 21:27:52.100] INIT: Entering runlevel: 5 [2025-09-23 21:27:52.260] mtd32 attached [2025-09-23 21:27:52.260] mtd24 attached [2025-09-23 21:27:52.276] mtd28 attached [2025-09-23 21:27:52.324] RTNETLINK answers: File exists [2025-09-23 21:27:52.366] ubi0:dml_code is mounted. [2025-09-23 21:27:52.366] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:27:52.366] ubi2:animations is mounted. [2025-09-23 21:27:52.366] ubi1:textures is mounted. [2025-09-23 21:27:52.366] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:27:52.366] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:27:52.366] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:27:52.366] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:27:52.391] data.LB_FadeInType0=100 [2025-09-23 21:27:52.392] data.CHLH_FadeInType0=0 [2025-09-23 21:27:52.392] data.WU_FadeInDelay=0 [2025-09-23 21:27:52.392] max_time_out=0 [2025-09-23 21:27:52.392] No splash screen [2025-09-23 21:27:52.392] stop dss Done [2025-09-23 21:27:52.439] /dev/mem opened. [2025-09-23 21:27:52.439] Memory mapped at address 0xffff917fc000. [2025-09-23 21:27:52.472] Read at address 0x00600018 (0xffff917fc018): 0x00000000 [2025-09-23 21:27:52.472] Write at address 0x00600018 (0xffff917fc018): 0x00400040, readback 0x00400040 [2025-09-23 21:27:52.472] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:27:52.472] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:27:52.600] Loaded PowerVR consumer services. [2025-09-23 21:27:52.727] Waiting data available... [2025-09-23 21:27:52.743] 512+0 records in [2025-09-23 21:27:52.743] 512+0 records out [2025-09-23 21:27:52.791] Starting syslogd/klogd: done [2025-09-23 21:27:52.807] DML Start [2025-09-23 21:27:52.983] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:27:53.208] DML res1: 0 [2025-09-23 21:27:53.654] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:27:53.654] Read Success [2025-09-23 21:27:53.654] Verifying certificate... [2025-09-23 21:27:53.926] Verified OK [2025-09-23 21:27:53.941] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:27:55.661] Verified OK [2025-09-23 21:27:55.661] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:27:56.246] Verified OK [2025-09-23 21:27:56.246] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:27:58.725] fs.protected_hardlinks = 1 [2025-09-23 21:27:58.740] fs.protected_symlinks = 1 [2025-09-23 21:27:58.756] kernel.modules_disabled = 1 [2025-09-23 21:27:58.948] [2025-09-23 21:27:58.948] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:28:00.240] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:28:07.980] SBL1:1210.0.1.0 [2025-09-23 21:28:08.027] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:28:09.594] SBL2:1210.0.1.0 [2025-09-23 21:28:09.642] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 21:28:09.754] j-A [2025-09-23 21:28:17.092] The R5 Autosar Classic is running [2025-09-23 21:28:17.117] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:28:17.117] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:28:17.725] INIT: version 2.96 booting [2025-09-23 21:28:17.836] INIT: Entering runlevel: 5 [2025-09-23 21:28:17.997] mtd24 attached [2025-09-23 21:28:17.997] mtd32 attached [2025-09-23 21:28:18.013] mtd28 attached [2025-09-23 21:28:18.060] ubi1:dml_code is mounted. [2025-09-23 21:28:18.060] ubi0:textures is mounted. [2025-09-23 21:28:18.124] RTNETLINK answers: File exists [2025-09-23 21:28:18.124] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:28:18.124] ubi2:animations is mounted. [2025-09-23 21:28:18.124] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:28:18.124] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:28:18.124] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:28:18.124] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:28:18.124] data.LB_FadeInType0=100 [2025-09-23 21:28:18.124] data.CHLH_FadeInType0=0 [2025-09-23 21:28:18.124] data.WU_FadeInDelay=0 [2025-09-23 21:28:18.124] max_time_out=0 [2025-09-23 21:28:18.124] No splash screen [2025-09-23 21:28:18.124] stop dss Done [2025-09-23 21:28:18.140] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:28:18.156] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:28:18.189] /dev/mem opened. [2025-09-23 21:28:18.189] Memory mapped at address 0xffffa7abc000. [2025-09-23 21:28:18.189] Read at address 0x00600018 (0xffffa7abc018): 0x00000000 [2025-09-23 21:28:18.189] Write at address 0x00600018 (0xffffa7abc018): 0x00400040, readback 0x00400040 [2025-09-23 21:28:18.301] Loaded PowerVR consumer services. [2025-09-23 21:28:18.460] Waiting data available... [2025-09-23 21:28:18.476] 512+0 records in [2025-09-23 21:28:18.476] 512+0 records out [2025-09-23 21:28:18.492] Starting syslogd/klogd: done [2025-09-23 21:28:18.524] DML Start [2025-09-23 21:28:18.716] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:28:18.972] DML res1: 0 [2025-09-23 21:28:19.348] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:28:19.348] Read Success [2025-09-23 21:28:19.348] Verifying certificate... [2025-09-23 21:28:19.604] Verified OK [2025-09-23 21:28:19.620] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:28:21.394] Verified OK [2025-09-23 21:28:21.394] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:28:21.970] Verified OK [2025-09-23 21:28:21.970] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:28:24.511] fs.protected_hardlinks = 1 [2025-09-23 21:28:24.511] fs.protected_symlinks = 1 [2025-09-23 21:28:24.527] kernel.modules_disabled = 1 [2025-09-23 21:28:24.719] [2025-09-23 21:28:24.719] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:28:26.047] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:28:33.711] SBL1:1210.0.1.0 [2025-09-23 21:28:33.759] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:28:35.326] SBL2:1210.0.1.0 [2025-09-23 21:28:35.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:28:35.485] j-A [2025-09-23 21:28:42.825] The R5 Autosar Classic is running [2025-09-23 21:28:42.856] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:28:42.856] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:28:43.464] INIT: version 2.96 booting [2025-09-23 21:28:43.575] INIT: Entering runlevel: 5 [2025-09-23 21:28:43.719] mtd24 attached [2025-09-23 21:28:43.736] mtd32 attached [2025-09-23 21:28:43.752] mtd28 attached [2025-09-23 21:28:43.800] ubi0:textures is mounted. [2025-09-23 21:28:43.800] RTNETLINK answers: File exists [2025-09-23 21:28:43.861] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:28:43.861] ubi2:animations is mounted. [2025-09-23 21:28:43.861] ubi1:dml_code is mounted. [2025-09-23 21:28:43.861] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:28:43.861] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:28:43.861] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:28:43.861] data.LB_FadeInType0=100 [2025-09-23 21:28:43.861] data.CHLH_FadeInType0=0 [2025-09-23 21:28:43.861] data.WU_FadeInDelay=0 [2025-09-23 21:28:43.861] max_time_out=0 [2025-09-23 21:28:43.861] No splash screen [2025-09-23 21:28:43.861] stop dss Done [2025-09-23 21:28:43.861] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:28:43.924] /dev/mem opened. [2025-09-23 21:28:43.924] Memory mapped at address 0xffff81304000. [2025-09-23 21:28:43.961] Read at address 0x00600018 (0xffff81304018): 0x00000000 [2025-09-23 21:28:43.961] Write at address 0x00600018 (0xffff81304018): 0x00400040, readback 0x00400040 [2025-09-23 21:28:43.961] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:28:43.961] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:28:44.041] Loaded PowerVR consumer services. [2025-09-23 21:28:44.201] Waiting data available... [2025-09-23 21:28:44.217] 512+0 records in [2025-09-23 21:28:44.217] 512+0 records out [2025-09-23 21:28:44.233] Starting syslogd/klogd: done [2025-09-23 21:28:44.265] DML Start [2025-09-23 21:28:44.441] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:28:44.616] DML res1: 0 [2025-09-23 21:28:45.144] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:28:45.167] Read Success [2025-09-23 21:28:45.167] Verifying certificate... [2025-09-23 21:28:45.391] Verified OK [2025-09-23 21:28:45.407] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:28:46.878] Verified OK [2025-09-23 21:28:46.878] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:28:47.491] Verified OK [2025-09-23 21:28:47.491] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:28:50.289] fs.protected_hardlinks = 1 [2025-09-23 21:28:50.289] fs.protected_symlinks = 1 [2025-09-23 21:28:50.305] kernel.modules_disabled = 1 [2025-09-23 21:28:50.480] [2025-09-23 21:28:50.480] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:28:51.701] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:28:59.458] SBL1:1210.0.1.0 [2025-09-23 21:28:59.506] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:29:01.074] SBL2:1210.0.1.0 [2025-09-23 21:29:01.121] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:29:01.233] j-A [2025-09-23 21:29:08.573] The R5 Autosar Classic is running [2025-09-23 21:29:08.604] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:29:08.604] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:29:09.211] INIT: version 2.96 booting [2025-09-23 21:29:09.323] INIT: Entering runlevel: 5 [2025-09-23 21:29:09.467] mtd32 attached [2025-09-23 21:29:09.483] mtd24 attached [2025-09-23 21:29:09.499] mtd28 attached [2025-09-23 21:29:09.531] ubi0:dml_code is mounted. [2025-09-23 21:29:09.547] RTNETLINK answers: File exists [2025-09-23 21:29:09.579] ubi1:textures is mounted. [2025-09-23 21:29:09.579] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:29:09.579] ubi2:animations is mounted. [2025-09-23 21:29:09.579] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:29:09.579] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:29:09.579] data.LB_FadeInType0=100 [2025-09-23 21:29:09.605] data.CHLH_FadeInType0=0 [2025-09-23 21:29:09.605] data.WU_FadeInDelay=0 [2025-09-23 21:29:09.605] max_time_out=0 [2025-09-23 21:29:09.605] No splash screen [2025-09-23 21:29:09.605] stop dss Done [2025-09-23 21:29:09.605] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:29:09.605] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:29:09.676] /dev/mem opened. [2025-09-23 21:29:09.676] Memory mapped at address 0xffff8ce45000. [2025-09-23 21:29:09.676] Read at address 0x00600018 (0xffff8ce45018): 0x00000000 [2025-09-23 21:29:09.676] Write at address 0x00600018 (0xffff8ce45018): 0x00400040, readback 0x00400040 [2025-09-23 21:29:09.709] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:29:09.725] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:29:09.901] Loaded PowerVR consumer services. [2025-09-23 21:29:09.948] Waiting data available... [2025-09-23 21:29:09.980] 512+0 records in [2025-09-23 21:29:09.980] 512+0 records out [2025-09-23 21:29:09.996] Starting syslogd/klogd: done [2025-09-23 21:29:10.012] DML Start [2025-09-23 21:29:10.188] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:29:10.444] DML res1: 0 [2025-09-23 21:29:10.795] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:29:10.812] Read Success [2025-09-23 21:29:10.812] Verifying certificate... [2025-09-23 21:29:11.051] Verified OK [2025-09-23 21:29:11.067] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:29:12.682] Verified OK [2025-09-23 21:29:12.682] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:29:13.370] Verified OK [2025-09-23 21:29:13.386] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:29:16.055] fs.protected_hardlinks = 1 [2025-09-23 21:29:16.071] fs.protected_symlinks = 1 [2025-09-23 21:29:16.071] kernel.modules_disabled = 1 [2025-09-23 21:29:16.279] [2025-09-23 21:29:16.279] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:29:17.507] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:29:25.200] SBL1:1210.0.1.0 [2025-09-23 21:29:25.248] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:29:26.814] SBL2:1210.0.1.0 [2025-09-23 21:29:26.862] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:29:26.974] j-A [2025-09-23 21:29:34.314] The R5 Autosar Classic is running [2025-09-23 21:29:34.345] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:29:34.345] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:29:34.953] INIT: version 2.96 booting [2025-09-23 21:29:35.065] INIT: Entering runlevel: 5 [2025-09-23 21:29:35.208] mtd24 attached [2025-09-23 21:29:35.224] mtd28 attached [2025-09-23 21:29:35.240] mtd32 attached [2025-09-23 21:29:35.288] RTNETLINK answers: File exists [2025-09-23 21:29:35.288] ubi0:textures is mounted. [2025-09-23 21:29:35.321] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:29:35.321] ubi1:animations is mounted. [2025-09-23 21:29:35.321] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:29:35.321] ubi2:dml_code is mounted. [2025-09-23 21:29:35.321] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:29:35.355] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:29:35.355] data.LB_FadeInType0=100 [2025-09-23 21:29:35.355] data.CHLH_FadeInType0=0 [2025-09-23 21:29:35.355] data.WU_FadeInDelay=0 [2025-09-23 21:29:35.355] max_time_out=0 [2025-09-23 21:29:35.355] No splash screen [2025-09-23 21:29:35.355] stop dss Done [2025-09-23 21:29:35.355] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:29:35.440] /dev/mem opened. [2025-09-23 21:29:35.440] Memory mapped at address 0xffffa0027000. [2025-09-23 21:29:35.440] Read at address 0x00600018 (0xffffa0027018): 0x00000000 [2025-09-23 21:29:35.440] Write at address 0x00600018 (0xffffa0027018): 0x00400040, readback 0x00400040 [2025-09-23 21:29:35.440] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:29:35.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:29:35.633] Loaded PowerVR consumer services. [2025-09-23 21:29:35.696] Waiting data available... [2025-09-23 21:29:35.712] 512+0 records in [2025-09-23 21:29:35.712] 512+0 records out [2025-09-23 21:29:35.760] Starting syslogd/klogd: done [2025-09-23 21:29:35.776] DML Start [2025-09-23 21:29:35.968] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:29:36.160] DML res1: 0 [2025-09-23 21:29:36.618] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:29:36.618] Read Success [2025-09-23 21:29:36.618] Verifying certificate... [2025-09-23 21:29:36.857] Verified OK [2025-09-23 21:29:36.873] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:29:38.529] Verified OK [2025-09-23 21:29:38.529] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:29:39.089] Verified OK [2025-09-23 21:29:39.089] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:29:41.743] fs.protected_hardlinks = 1 [2025-09-23 21:29:41.758] fs.protected_symlinks = 1 [2025-09-23 21:29:41.758] kernel.modules_disabled = 1 [2025-09-23 21:29:41.966] [2025-09-23 21:29:41.966] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:29:43.194] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:29:50.957] SBL1:1210.0.1.0 [2025-09-23 21:29:50.989] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:29:52.572] SBL2:1210.0.1.0 [2025-09-23 21:29:52.604] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:29:52.716] j-A [2025-09-23 21:30:00.089] The R5 Autosar Classic is running [2025-09-23 21:30:00.089] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:30:00.089] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:30:00.696] INIT: version 2.96 booting [2025-09-23 21:30:00.809] INIT: Entering runlevel: 5 [2025-09-23 21:30:00.969] mtd28 attached [2025-09-23 21:30:00.969] mtd24 attached [2025-09-23 21:30:00.984] mtd32 attached [2025-09-23 21:30:01.016] ubi0:animations is mounted. [2025-09-23 21:30:01.032] RTNETLINK answers: File exists [2025-09-23 21:30:01.032] ubi1:textures is mounted. [2025-09-23 21:30:01.062] ubi2:dml_code is mounted. [2025-09-23 21:30:01.062] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:30:01.062] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:30:01.062] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:30:01.094] data.LB_FadeInType0=100 [2025-09-23 21:30:01.094] data.CHLH_FadeInType0=0 [2025-09-23 21:30:01.094] data.WU_FadeInDelay=0 [2025-09-23 21:30:01.094] max_time_out=0 [2025-09-23 21:30:01.094] No splash screen [2025-09-23 21:30:01.094] stop dss Done [2025-09-23 21:30:01.094] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:30:01.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:30:01.163] /dev/mem opened. [2025-09-23 21:30:01.163] Memory mapped at address 0xffff934eb000. [2025-09-23 21:30:01.163] Read at address 0x00600018 (0xffff934eb018): 0x00000000 [2025-09-23 21:30:01.163] Write at address 0x00600018 (0xffff934eb018): 0x00400040, readback 0x00400040 [2025-09-23 21:30:01.163] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:30:01.163] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:30:01.339] Loaded PowerVR consumer services. [2025-09-23 21:30:01.451] Waiting data available... [2025-09-23 21:30:01.467] 512+0 records in [2025-09-23 21:30:01.483] 512+0 records out [2025-09-23 21:30:01.515] Starting syslogd/klogd: done [2025-09-23 21:30:01.531] DML Start [2025-09-23 21:30:01.723] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:30:01.963] DML res1: 0 [2025-09-23 21:30:02.385] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:30:02.385] Read Success [2025-09-23 21:30:02.385] Verifying certificate... [2025-09-23 21:30:02.656] Verified OK [2025-09-23 21:30:02.672] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:30:04.264] Verified OK [2025-09-23 21:30:04.264] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:30:04.847] Verified OK [2025-09-23 21:30:04.847] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:30:07.517] fs.protected_hardlinks = 1 [2025-09-23 21:30:07.533] fs.protected_symlinks = 1 [2025-09-23 21:30:07.533] kernel.modules_disabled = 1 [2025-09-23 21:30:07.725] [2025-09-23 21:30:07.725] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:30:08.945] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:30:16.691] SBL1:1210.0.1.0 [2025-09-23 21:30:16.739] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:30:18.306] SBL2:1210.0.1.0 [2025-09-23 21:30:18.354] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:30:18.450] j-A [2025-09-23 21:30:25.804] The R5 Autosar Classic is running [2025-09-23 21:30:25.827] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:30:25.827] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:30:26.435] INIT: version 2.96 booting [2025-09-23 21:30:26.547] INIT: Entering runlevel: 5 [2025-09-23 21:30:26.707] mtd24 attached [2025-09-23 21:30:26.707] mtd32 attached [2025-09-23 21:30:26.723] mtd28 attached [2025-09-23 21:30:26.771] RTNETLINK answers: File exists [2025-09-23 21:30:26.810] ubi0:textures is mounted. [2025-09-23 21:30:26.810] ubi2:animations is mounted. [2025-09-23 21:30:26.810] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:30:26.810] ubi1:dml_code is mounted. [2025-09-23 21:30:26.810] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:30:26.810] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:30:26.810] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:30:26.838] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:30:26.838] data.LB_FadeInType0=100 [2025-09-23 21:30:26.838] data.CHLH_FadeInType0=0 [2025-09-23 21:30:26.838] data.WU_FadeInDelay=0 [2025-09-23 21:30:26.838] max_time_out=0 [2025-09-23 21:30:26.838] No splash screen [2025-09-23 21:30:26.838] stop dss Done [2025-09-23 21:30:26.870] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:30:26.908] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:30:26.908] /dev/mem opened. [2025-09-23 21:30:26.908] Memory mapped at address 0xffff825de000. [2025-09-23 21:30:26.908] Read at address 0x00600018 (0xffff825de018): 0x00000000 [2025-09-23 21:30:26.908] Write at address 0x00600018 (0xffff825de018): 0x00400040, readback 0x00400040 [2025-09-23 21:30:27.068] Loaded PowerVR consumer services. [2025-09-23 21:30:27.180] Waiting data available... [2025-09-23 21:30:27.196] 512+0 records in [2025-09-23 21:30:27.212] 512+0 records out [2025-09-23 21:30:27.244] Starting syslogd/klogd: done [2025-09-23 21:30:27.260] DML Start [2025-09-23 21:30:27.467] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:30:27.675] DML res1: 0 [2025-09-23 21:30:28.059] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:30:28.059] Read Success [2025-09-23 21:30:28.075] Verifying certificate... [2025-09-23 21:30:28.315] Verified OK [2025-09-23 21:30:28.347] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:30:29.990] Verified OK [2025-09-23 21:30:29.990] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:30:30.672] Verified OK [2025-09-23 21:30:30.672] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:30:33.279] fs.protected_hardlinks = 1 [2025-09-23 21:30:33.279] fs.protected_symlinks = 1 [2025-09-23 21:30:33.295] kernel.modules_disabled = 1 [2025-09-23 21:30:33.470] [2025-09-23 21:30:33.470] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:30:34.707] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:30:42.457] SBL1:1210.0.1.0 [2025-09-23 21:30:42.489] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:30:44.072] SBL2:1210.0.1.0 [2025-09-23 21:30:44.104] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:30:44.216] j-A [2025-09-23 21:30:51.571] The R5 Autosar Classic is running [2025-09-23 21:30:51.571] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:30:51.592] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:30:52.200] INIT: version 2.96 booting [2025-09-23 21:30:52.311] INIT: Entering runlevel: 5 [2025-09-23 21:30:52.471] mtd28 attached [2025-09-23 21:30:52.471] mtd24 attached [2025-09-23 21:30:52.487] mtd32 attached [2025-09-23 21:30:52.591] ubi0:animations is mounted. [2025-09-23 21:30:52.591] RTNETLINK answers: File exists [2025-09-23 21:30:52.591] ubi1:textures is mounted. [2025-09-23 21:30:52.591] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:30:52.591] ubi2:dml_code is mounted. [2025-09-23 21:30:52.591] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:30:52.591] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:30:52.591] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:30:52.591] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:30:52.591] data.LB_FadeInType0=100 [2025-09-23 21:30:52.591] data.CHLH_FadeInType0=0 [2025-09-23 21:30:52.591] data.WU_FadeInDelay=0 [2025-09-23 21:30:52.591] max_time_out=0 [2025-09-23 21:30:52.591] No splash screen [2025-09-23 21:30:52.591] stop dss Done [2025-09-23 21:30:52.622] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:30:52.638] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:30:52.671] /dev/mem opened. [2025-09-23 21:30:52.671] Memory mapped at address 0xffff910a4000. [2025-09-23 21:30:52.671] Read at address 0x00600018 (0xffff910a4018): 0x00000000 [2025-09-23 21:30:52.671] Write at address 0x00600018 (0xffff910a4018): 0x00400040, readback 0x00400040 [2025-09-23 21:30:52.895] Loaded PowerVR consumer services. [2025-09-23 21:30:52.927] Waiting data available... [2025-09-23 21:30:52.959] 512+0 records in [2025-09-23 21:30:52.959] 512+0 records out [2025-09-23 21:30:53.007] Starting syslogd/klogd: done [2025-09-23 21:30:53.023] DML Start [2025-09-23 21:30:53.215] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:30:53.438] DML res1: 0 [2025-09-23 21:30:53.844] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:30:53.844] Read Success [2025-09-23 21:30:53.844] Verifying certificate... [2025-09-23 21:30:54.083] Verified OK [2025-09-23 21:30:54.099] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:30:55.803] Verified OK [2025-09-23 21:30:55.803] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:30:56.362] Verified OK [2025-09-23 21:30:56.378] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:30:59.032] fs.protected_hardlinks = 1 [2025-09-23 21:30:59.059] fs.protected_symlinks = 1 [2025-09-23 21:30:59.059] kernel.modules_disabled = 1 [2025-09-23 21:30:59.235] [2025-09-23 21:30:59.235] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:31:00.458] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:31:08.181] SBL1:1210.0.1.0 [2025-09-23 21:31:08.213] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:31:09.795] SBL2:1210.0.1.0 [2025-09-23 21:31:09.843] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:31:09.939] j-A [2025-09-23 21:31:17.293] The R5 Autosar Classic is running [2025-09-23 21:31:17.316] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:31:17.316] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:31:17.924] INIT: version 2.96 booting [2025-09-23 21:31:18.035] INIT: Entering runlevel: 5 [2025-09-23 21:31:18.179] mtd24 attached [2025-09-23 21:31:18.195] mtd28 attached [2025-09-23 21:31:18.211] mtd32 attached [2025-09-23 21:31:18.259] ubi0:textures is mounted. [2025-09-23 21:31:18.259] RTNETLINK answers: File exists [2025-09-23 21:31:18.298] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:31:18.298] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:31:18.298] ubi1:animations is mounted. [2025-09-23 21:31:18.298] ubi2:dml_code is mounted. [2025-09-23 21:31:18.298] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:31:18.298] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:31:18.298] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:31:18.323] data.LB_FadeInType0=100 [2025-09-23 21:31:18.323] data.CHLH_FadeInType0=0 [2025-09-23 21:31:18.323] data.WU_FadeInDelay=0 [2025-09-23 21:31:18.323] max_time_out=0 [2025-09-23 21:31:18.323] No splash screen [2025-09-23 21:31:18.323] stop dss Done [2025-09-23 21:31:18.355] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:31:18.355] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:31:18.390] /dev/mem opened. [2025-09-23 21:31:18.390] Memory mapped at address 0xffffa6a5d000. [2025-09-23 21:31:18.390] Read at address 0x00600018 (0xffffa6a5d018): 0x00000000 [2025-09-23 21:31:18.390] Write at address 0x00600018 (0xffffa6a5d018): 0x00400040, readback 0x00400040 [2025-09-23 21:31:18.533] Loaded PowerVR consumer services. [2025-09-23 21:31:18.662] Waiting data available... [2025-09-23 21:31:18.677] 512+0 records in [2025-09-23 21:31:18.677] 512+0 records out [2025-09-23 21:31:18.725] Starting syslogd/klogd: done [2025-09-23 21:31:18.741] DML Start [2025-09-23 21:31:18.933] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:31:19.156] DML res1: 0 [2025-09-23 21:31:19.564] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:31:19.564] Read Success [2025-09-23 21:31:19.564] Verifying certificate... [2025-09-23 21:31:19.789] Verified OK [2025-09-23 21:31:19.804] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:31:21.463] Verified OK [2025-09-23 21:31:21.463] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:31:22.047] Verified OK [2025-09-23 21:31:22.047] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:31:24.589] fs.protected_hardlinks = 1 [2025-09-23 21:31:24.589] fs.protected_symlinks = 1 [2025-09-23 21:31:24.605] kernel.modules_disabled = 1 [2025-09-23 21:31:24.797] [2025-09-23 21:31:24.797] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:31:26.184] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:31:33.930] SBL1:1210.0.1.0 [2025-09-23 21:31:33.977] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:31:35.544] SBL2:1210.0.1.0 [2025-09-23 21:31:35.592] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:31:35.688] j-A [2025-09-23 21:31:43.042] The R5 Autosar Classic is running [2025-09-23 21:31:43.066] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:31:43.066] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:31:43.673] INIT: version 2.96 booting [2025-09-23 21:31:43.785] INIT: Entering runlevel: 5 [2025-09-23 21:31:43.929] mtd28 attached [2025-09-23 21:31:43.945] mtd32 attached [2025-09-23 21:31:43.961] mtd24 attached [2025-09-23 21:31:43.977] ubi0:animations is mounted. [2025-09-23 21:31:44.008] RTNETLINK answers: File exists [2025-09-23 21:31:44.009] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:31:44.044] ubi1:dml_code is mounted. [2025-09-23 21:31:44.044] ubi2:textures is mounted. [2025-09-23 21:31:44.044] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:31:44.044] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:31:44.044] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:31:44.044] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:31:44.044] data.LB_FadeInType0=100 [2025-09-23 21:31:44.066] data.CHLH_FadeInType0=0 [2025-09-23 21:31:44.066] data.WU_FadeInDelay=0 [2025-09-23 21:31:44.066] max_time_out=0 [2025-09-23 21:31:44.066] No splash screen [2025-09-23 21:31:44.066] stop dss Done [2025-09-23 21:31:44.098] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:31:44.098] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:31:44.114] /dev/mem opened. [2025-09-23 21:31:44.140] Memory mapped at address 0xffffb4e6d000. [2025-09-23 21:31:44.140] Read at address 0x00600018 (0xffffb4e6d018): 0x00000000 [2025-09-23 21:31:44.140] Write at address 0x00600018 (0xffffb4e6d018): 0x00400040, readback 0x00400040 [2025-09-23 21:31:44.316] Loaded PowerVR consumer services. [2025-09-23 21:31:44.412] Waiting data available... [2025-09-23 21:31:44.428] 512+0 records in [2025-09-23 21:31:44.428] 512+0 records out [2025-09-23 21:31:44.460] Starting syslogd/klogd: done [2025-09-23 21:31:44.476] DML Start [2025-09-23 21:31:44.684] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:31:44.891] DML res1: 0 [2025-09-23 21:31:45.291] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:31:45.307] Read Success [2025-09-23 21:31:45.307] Verifying certificate... [2025-09-23 21:31:45.531] Verified OK [2025-09-23 21:31:45.547] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:31:47.194] Verified OK [2025-09-23 21:31:47.194] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:31:47.797] Verified OK [2025-09-23 21:31:47.797] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:31:50.419] fs.protected_hardlinks = 1 [2025-09-23 21:31:50.447] fs.protected_symlinks = 1 [2025-09-23 21:31:50.447] kernel.modules_disabled = 1 [2025-09-23 21:31:50.622] [2025-09-23 21:31:50.622] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:31:51.972] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:31:59.663] SBL1:1210.0.1.0 [2025-09-23 21:31:59.711] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:32:01.277] SBL2:1210.0.1.0 [2025-09-23 21:32:01.325] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:32:01.438] j-A [2025-09-23 21:32:08.776] The R5 Autosar Classic is running [2025-09-23 21:32:08.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:32:08.807] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:32:09.414] INIT: version 2.96 booting [2025-09-23 21:32:09.511] INIT: Entering runlevel: 5 [2025-09-23 21:32:09.670] mtd24 attached [2025-09-23 21:32:09.686] mtd28 attached [2025-09-23 21:32:09.686] mtd32 attached [2025-09-23 21:32:09.734] ubi0:textures is mounted. [2025-09-23 21:32:09.807] ubi1:animations is mounted. [2025-09-23 21:32:09.807] RTNETLINK answers: File exists [2025-09-23 21:32:09.807] ubi2:dml_code is mounted. [2025-09-23 21:32:09.807] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:32:09.807] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:32:09.807] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:32:09.807] data.LB_FadeInType0=100 [2025-09-23 21:32:09.807] data.CHLH_FadeInType0=0 [2025-09-23 21:32:09.807] data.WU_FadeInDelay=0 [2025-09-23 21:32:09.807] max_time_out=0 [2025-09-23 21:32:09.807] No splash screen [2025-09-23 21:32:09.807] stop dss Done [2025-09-23 21:32:09.807] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:32:09.807] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:32:09.839] /dev/mem opened. [2025-09-23 21:32:09.839] Memory mapped at address 0xffffbb221000. [2025-09-23 21:32:09.865] Read at address 0x00600018 (0xffffbb221018): 0x00000000 [2025-09-23 21:32:09.865] Write at address 0x00600018 (0xffffbb221018): 0x00400040, readback 0x00400040 [2025-09-23 21:32:09.865] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:32:09.881] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:32:10.165] Loaded PowerVR consumer services. [2025-09-23 21:32:10.165] Waiting data available... [2025-09-23 21:32:10.198] 512+0 records in [2025-09-23 21:32:10.198] 512+0 records out [2025-09-23 21:32:10.246] Starting syslogd/klogd: done [2025-09-23 21:32:10.246] DML Start [2025-09-23 21:32:10.470] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:32:10.661] DML res1: 0 [2025-09-23 21:32:11.045] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:32:11.068] Read Success [2025-09-23 21:32:11.068] Verifying certificate... [2025-09-23 21:32:11.356] Verified OK [2025-09-23 21:32:11.356] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:32:12.967] Verified OK [2025-09-23 21:32:12.967] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:32:13.503] Verified OK [2025-09-23 21:32:13.503] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:32:16.061] fs.protected_hardlinks = 1 [2025-09-23 21:32:16.077] fs.protected_symlinks = 1 [2025-09-23 21:32:16.077] kernel.modules_disabled = 1 [2025-09-23 21:32:16.269] [2025-09-23 21:32:16.269] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:32:17.748] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:32:25.397] SBL1:1210.0.1.0 [2025-09-23 21:32:25.429] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:32:27.011] SBL2:1210.0.1.0 [2025-09-23 21:32:27.043] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:32:27.155] j-A [2025-09-23 21:32:34.528] The R5 Autosar Classic is running [2025-09-23 21:32:34.528] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:32:34.528] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:32:35.136] INIT: version 2.96 booting [2025-09-23 21:32:35.248] INIT: Entering runlevel: 5 [2025-09-23 21:32:35.408] mtd28 attached [2025-09-23 21:32:35.408] mtd24 attached [2025-09-23 21:32:35.423] mtd32 attached [2025-09-23 21:32:35.440] ubi0:animations is mounted. [2025-09-23 21:32:35.471] ubi1:textures is mounted. [2025-09-23 21:32:35.471] RTNETLINK answers: File exists [2025-09-23 21:32:35.529] ubi2:dml_code is mounted. [2025-09-23 21:32:35.530] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:32:35.530] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:32:35.530] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:32:35.530] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:32:35.530] data.LB_FadeInType0=100 [2025-09-23 21:32:35.530] data.CHLH_FadeInType0=0 [2025-09-23 21:32:35.530] data.WU_FadeInDelay=0 [2025-09-23 21:32:35.530] max_time_out=0 [2025-09-23 21:32:35.530] No splash screen [2025-09-23 21:32:35.530] stop dss Done [2025-09-23 21:32:35.530] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:32:35.603] /dev/mem opened. [2025-09-23 21:32:35.603] Memory mapped at address 0xffffadf29000. [2025-09-23 21:32:35.603] Read at address 0x00600018 (0xffffadf29018): 0x00000000 [2025-09-23 21:32:35.603] Write at address 0x00600018 (0xffffadf29018): 0x00400040, readback 0x00400040 [2025-09-23 21:32:35.603] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:32:35.619] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:32:35.812] Loaded PowerVR consumer services. [2025-09-23 21:32:35.876] Waiting data available... [2025-09-23 21:32:35.892] 512+0 records in [2025-09-23 21:32:35.892] 512+0 records out [2025-09-23 21:32:35.939] Starting syslogd/klogd: done [2025-09-23 21:32:35.955] DML Start [2025-09-23 21:32:36.115] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:32:36.291] DML res1: 0 [2025-09-23 21:32:36.882] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:32:36.905] Read Success [2025-09-23 21:32:36.905] Verifying certificate... [2025-09-23 21:32:37.209] Verified OK [2025-09-23 21:32:37.241] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:32:38.840] Verified OK [2025-09-23 21:32:38.840] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:32:39.439] Verified OK [2025-09-23 21:32:39.439] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:32:41.950] fs.protected_hardlinks = 1 [2025-09-23 21:32:41.950] fs.protected_symlinks = 1 [2025-09-23 21:32:41.950] kernel.modules_disabled = 1 [2025-09-23 21:32:42.141] [2025-09-23 21:32:42.141] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:32:43.392] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:32:51.142] SBL1:1210.0.1.0 [2025-09-23 21:32:51.174] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:32:52.757] SBL2:1210.0.1.0 [2025-09-23 21:32:52.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:32:52.901] j-A [2025-09-23 21:33:00.275] The R5 Autosar Classic is running [2025-09-23 21:33:00.275] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:33:00.275] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:33:00.883] INIT: version 2.96 booting [2025-09-23 21:33:00.995] INIT: Entering runlevel: 5 [2025-09-23 21:33:01.155] mtd28 attached [2025-09-23 21:33:01.155] mtd32 attached [2025-09-23 21:33:01.170] mtd24 attached [2025-09-23 21:33:01.186] ubi0:animations is mounted. [2025-09-23 21:33:01.219] RTNETLINK answers: File exists [2025-09-23 21:33:01.219] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:33:01.255] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:33:01.255] ubi2:textures is mounted. [2025-09-23 21:33:01.255] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:33:01.255] ubi1:dml_code is mounted. [2025-09-23 21:33:01.255] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:33:01.255] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:33:01.278] data.LB_FadeInType0=100 [2025-09-23 21:33:01.278] data.CHLH_FadeInType0=0 [2025-09-23 21:33:01.278] data.WU_FadeInDelay=0 [2025-09-23 21:33:01.278] max_time_out=0 [2025-09-23 21:33:01.278] No splash screen [2025-09-23 21:33:01.278] stop dss Done [2025-09-23 21:33:01.326] /dev/mem opened. [2025-09-23 21:33:01.326] Memory mapped at address 0xffff87b6c000. [2025-09-23 21:33:01.364] Read at address 0x00600018 (0xffff87b6c018): 0x00000000 [2025-09-23 21:33:01.364] Write at address 0x00600018 (0xffff87b6c018): 0x00400040, readback 0x00400040 [2025-09-23 21:33:01.364] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:33:01.364] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:33:01.475] Loaded PowerVR consumer services. [2025-09-23 21:33:01.620] Waiting data available... [2025-09-23 21:33:01.652] 512+0 records in [2025-09-23 21:33:01.652] 512+0 records out [2025-09-23 21:33:01.668] Starting syslogd/klogd: done [2025-09-23 21:33:01.684] DML Start [2025-09-23 21:33:01.907] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:33:02.147] DML res1: 0 [2025-09-23 21:33:02.542] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:33:02.542] Read Success [2025-09-23 21:33:02.542] Verifying certificate... [2025-09-23 21:33:02.798] Verified OK [2025-09-23 21:33:02.813] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:33:04.460] Verified OK [2025-09-23 21:33:04.460] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:33:05.066] Verified OK [2025-09-23 21:33:05.066] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:33:07.560] fs.protected_hardlinks = 1 [2025-09-23 21:33:07.576] fs.protected_symlinks = 1 [2025-09-23 21:33:07.576] kernel.modules_disabled = 1 [2025-09-23 21:33:07.768] [2025-09-23 21:33:07.768] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:33:09.127] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:33:16.876] SBL1:1210.0.1.0 [2025-09-23 21:33:16.924] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:33:18.490] SBL2:1210.0.1.0 [2025-09-23 21:33:18.538] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:33:18.634] j-A [2025-09-23 21:33:25.990] The R5 Autosar Classic is running [2025-09-23 21:33:26.013] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:33:26.013] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:33:26.621] INIT: version 2.96 booting [2025-09-23 21:33:26.733] INIT: Entering runlevel: 5 [2025-09-23 21:33:26.893] mtd24 attached [2025-09-23 21:33:26.893] mtd28 attached [2025-09-23 21:33:26.908] mtd32 attached [2025-09-23 21:33:26.956] ubi1:animations is mounted. [2025-09-23 21:33:26.956] RTNETLINK answers: File exists [2025-09-23 21:33:26.972] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:33:27.023] ubi0:textures is mounted. [2025-09-23 21:33:27.023] ubi2:dml_code is mounted. [2025-09-23 21:33:27.023] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:33:27.023] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:33:27.023] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:33:27.023] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:33:27.023] data.LB_FadeInType0=100 [2025-09-23 21:33:27.023] data.CHLH_FadeInType0=0 [2025-09-23 21:33:27.023] data.WU_FadeInDelay=0 [2025-09-23 21:33:27.023] max_time_out=0 [2025-09-23 21:33:27.023] No splash screen [2025-09-23 21:33:27.023] stop dss Done [2025-09-23 21:33:27.055] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:33:27.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:33:27.094] /dev/mem opened. [2025-09-23 21:33:27.094] Memory mapped at address 0xffffb4f05000. [2025-09-23 21:33:27.094] Read at address 0x00600018 (0xffffb4f05018): 0x00000000 [2025-09-23 21:33:27.094] Write at address 0x00600018 (0xffffb4f05018): 0x00400040, readback 0x00400040 [2025-09-23 21:33:27.398] Loaded PowerVR consumer services. [2025-09-23 21:33:27.413] Waiting data available... [2025-09-23 21:33:27.446] 512+0 records in [2025-09-23 21:33:27.446] 512+0 records out [2025-09-23 21:33:27.478] Starting syslogd/klogd: done [2025-09-23 21:33:27.493] DML Start [2025-09-23 21:33:27.637] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:33:27.845] DML res1: 0 [2025-09-23 21:33:28.396] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:33:28.396] Read Success [2025-09-23 21:33:28.396] Verifying certificate... [2025-09-23 21:33:28.732] Verified OK [2025-09-23 21:33:28.764] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:33:30.370] Verified OK [2025-09-23 21:33:30.370] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:33:30.927] Verified OK [2025-09-23 21:33:30.927] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:33:33.435] fs.protected_hardlinks = 1 [2025-09-23 21:33:33.435] fs.protected_symlinks = 1 [2025-09-23 21:33:33.435] kernel.modules_disabled = 1 [2025-09-23 21:33:33.611] [2025-09-23 21:33:33.611] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:33:34.898] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:33:42.616] SBL1:1210.0.1.0 [2025-09-23 21:33:42.664] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:33:44.231] SBL2:1210.0.1.0 [2025-09-23 21:33:44.279] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:33:44.391] j-A [2025-09-23 21:33:51.731] The R5 Autosar Classic is running [2025-09-23 21:33:51.756] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:33:51.756] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:33:52.364] INIT: version 2.96 booting [2025-09-23 21:33:52.476] INIT: Entering runlevel: 5 [2025-09-23 21:33:52.636] mtd28 attached [2025-09-23 21:33:52.636] mtd24 attached [2025-09-23 21:33:52.652] mtd32 attached [2025-09-23 21:33:52.700] ubi1:textures is mounted. [2025-09-23 21:33:52.700] RTNETLINK answers: File exists [2025-09-23 21:33:52.766] ubi0:animations is mounted. [2025-09-23 21:33:52.766] ubi2:dml_code is mounted. [2025-09-23 21:33:52.766] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:33:52.766] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:33:52.766] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:33:52.766] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:33:52.766] data.LB_FadeInType0=100 [2025-09-23 21:33:52.766] data.CHLH_FadeInType0=0 [2025-09-23 21:33:52.766] data.WU_FadeInDelay=0 [2025-09-23 21:33:52.766] max_time_out=0 [2025-09-23 21:33:52.766] No splash screen [2025-09-23 21:33:52.766] stop dss Done [2025-09-23 21:33:52.766] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:33:52.853] /dev/mem opened. [2025-09-23 21:33:52.853] Memory mapped at address 0xffff96b4a000. [2025-09-23 21:33:52.853] Read at address 0x00600018 (0xffff96b4a018): 0x00000000 [2025-09-23 21:33:52.853] Write at address 0x00600018 (0xffff96b4a018): 0x00400040, readback 0x00400040 [2025-09-23 21:33:52.853] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:33:52.853] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:33:52.965] Loaded PowerVR consumer services. [2025-09-23 21:33:53.110] Waiting data available... [2025-09-23 21:33:53.141] 512+0 records in [2025-09-23 21:33:53.141] 512+0 records out [2025-09-23 21:33:53.173] Starting syslogd/klogd: done [2025-09-23 21:33:53.189] DML Start [2025-09-23 21:33:53.350] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:33:53.606] DML res1: 0 [2025-09-23 21:33:54.051] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:33:54.051] Read Success [2025-09-23 21:33:54.051] Verifying certificate... [2025-09-23 21:33:54.290] Verified OK [2025-09-23 21:33:54.306] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:33:55.921] Verified OK [2025-09-23 21:33:55.921] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:33:56.482] Verified OK [2025-09-23 21:33:56.482] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:33:59.279] fs.protected_hardlinks = 1 [2025-09-23 21:33:59.295] fs.protected_symlinks = 1 [2025-09-23 21:33:59.295] kernel.modules_disabled = 1 [2025-09-23 21:33:59.503] [2025-09-23 21:33:59.503] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:34:00.633] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:34:08.366] SBL1:1210.0.1.0 [2025-09-23 21:34:08.414] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:34:09.981] SBL2:1210.0.1.0 [2025-09-23 21:34:10.029] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:34:10.140] j-A [2025-09-23 21:34:17.480] The R5 Autosar Classic is running [2025-09-23 21:34:17.505] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:34:17.505] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:34:18.113] INIT: version 2.96 booting [2025-09-23 21:34:18.225] INIT: Entering runlevel: 5 [2025-09-23 21:34:18.385] mtd24 attached [2025-09-23 21:34:18.385] mtd28 attached [2025-09-23 21:34:18.401] mtd32 attached [2025-09-23 21:34:18.449] ubi0:textures is mounted. [2025-09-23 21:34:18.491] RTNETLINK answers: File exists [2025-09-23 21:34:18.491] ubi2:dml_code is mounted. [2025-09-23 21:34:18.491] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:34:18.491] ubi1:animations is mounted. [2025-09-23 21:34:18.491] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:34:18.491] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:34:18.491] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:34:18.518] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:34:18.518] data.LB_FadeInType0=100 [2025-09-23 21:34:18.518] data.CHLH_FadeInType0=0 [2025-09-23 21:34:18.518] data.WU_FadeInDelay=0 [2025-09-23 21:34:18.518] max_time_out=0 [2025-09-23 21:34:18.518] No splash screen [2025-09-23 21:34:18.518] stop dss Done [2025-09-23 21:34:18.566] /dev/mem opened. [2025-09-23 21:34:18.566] Memory mapped at address 0xffff9d9c7000. [2025-09-23 21:34:18.598] Read at address 0x00600018 (0xffff9d9c7018): 0x00000000 [2025-09-23 21:34:18.598] Write at address 0x00600018 (0xffff9d9c7018): 0x00400040, readback 0x00400040 [2025-09-23 21:34:18.598] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:34:18.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:34:18.679] Loaded PowerVR consumer services. [2025-09-23 21:34:18.870] Waiting data available... [2025-09-23 21:34:18.886] 512+0 records in [2025-09-23 21:34:18.886] 512+0 records out [2025-09-23 21:34:18.935] Starting syslogd/klogd: done [2025-09-23 21:34:18.951] DML Start [2025-09-23 21:34:19.094] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:34:19.302] DML res1: 0 [2025-09-23 21:34:19.813] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:34:19.813] Read Success [2025-09-23 21:34:19.813] Verifying certificate... [2025-09-23 21:34:20.053] Verified OK [2025-09-23 21:34:20.069] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:34:21.588] Verified OK [2025-09-23 21:34:21.588] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:34:22.196] Verified OK [2025-09-23 21:34:22.196] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:34:24.978] fs.protected_hardlinks = 1 [2025-09-23 21:34:24.994] fs.protected_symlinks = 1 [2025-09-23 21:34:24.994] kernel.modules_disabled = 1 [2025-09-23 21:34:25.186] [2025-09-23 21:34:25.186] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:34:26.371] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:34:34.118] SBL1:1210.0.1.0 [2025-09-23 21:34:34.165] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:34:35.732] SBL2:1210.0.1.0 [2025-09-23 21:34:35.780] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:34:35.876] j-A [2025-09-23 21:34:43.231] The R5 Autosar Classic is running [2025-09-23 21:34:43.254] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:34:43.254] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:34:43.861] INIT: version 2.96 booting [2025-09-23 21:34:43.974] INIT: Entering runlevel: 5 [2025-09-23 21:34:44.118] mtd24 attached [2025-09-23 21:34:44.134] mtd28 attached [2025-09-23 21:34:44.150] mtd32 attached [2025-09-23 21:34:44.198] ubi1:animations is mounted. [2025-09-23 21:34:44.198] RTNETLINK answers: File exists [2025-09-23 21:34:44.255] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:34:44.255] ubi0:textures is mounted. [2025-09-23 21:34:44.255] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:34:44.255] ubi2:dml_code is mounted. [2025-09-23 21:34:44.255] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:34:44.255] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:34:44.255] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:34:44.255] data.LB_FadeInType0=100 [2025-09-23 21:34:44.255] data.CHLH_FadeInType0=0 [2025-09-23 21:34:44.255] data.WU_FadeInDelay=0 [2025-09-23 21:34:44.255] max_time_out=0 [2025-09-23 21:34:44.255] No splash screen [2025-09-23 21:34:44.255] stop dss Done [2025-09-23 21:34:44.287] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:34:44.302] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:34:44.343] /dev/mem opened. [2025-09-23 21:34:44.343] Memory mapped at address 0xffffa8419000. [2025-09-23 21:34:44.343] Read at address 0x00600018 (0xffffa8419018): 0x00000000 [2025-09-23 21:34:44.343] Write at address 0x00600018 (0xffffa8419018): 0x00400040, readback 0x00400040 [2025-09-23 21:34:44.439] Loaded PowerVR consumer services. [2025-09-23 21:34:44.600] Waiting data available... [2025-09-23 21:34:44.616] 512+0 records in [2025-09-23 21:34:44.616] 512+0 records out [2025-09-23 21:34:44.647] Starting syslogd/klogd: done [2025-09-23 21:34:44.663] DML Start [2025-09-23 21:34:44.839] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:34:45.063] DML res1: 0 [2025-09-23 21:34:45.479] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:34:45.495] Read Success [2025-09-23 21:34:45.495] Verifying certificate... [2025-09-23 21:34:45.703] Verified OK [2025-09-23 21:34:45.719] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:34:47.362] Verified OK [2025-09-23 21:34:47.362] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:34:48.059] Verified OK [2025-09-23 21:34:48.059] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:34:50.697] fs.protected_hardlinks = 1 [2025-09-23 21:34:50.713] fs.protected_symlinks = 1 [2025-09-23 21:34:50.713] kernel.modules_disabled = 1 [2025-09-23 21:34:50.922] [2025-09-23 21:34:50.922] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:34:52.118] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:34:59.860] SBL1:1210.0.1.0 [2025-09-23 21:34:59.892] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:35:01.474] SBL2:1210.0.1.0 [2025-09-23 21:35:01.506] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:35:01.618] j-A [2025-09-23 21:35:08.993] The R5 Autosar Classic is running [2025-09-23 21:35:08.993] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:35:08.993] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:35:09.600] INIT: version 2.96 booting [2025-09-23 21:35:09.711] INIT: Entering runlevel: 5 [2025-09-23 21:35:09.856] mtd24 attached [2025-09-23 21:35:09.872] mtd28 attached [2025-09-23 21:35:09.904] ubi0:textures is mounted. [2025-09-23 21:35:09.904] mtd32 attached [2025-09-23 21:35:09.920] ubi1:animations is mounted. [2025-09-23 21:35:09.936] RTNETLINK answers: File exists [2025-09-23 21:35:09.993] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:35:09.993] ubi2:dml_code is mounted. [2025-09-23 21:35:09.993] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:35:09.993] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:35:09.993] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:35:09.993] data.LB_FadeInType0=100 [2025-09-23 21:35:09.993] data.CHLH_FadeInType0=0 [2025-09-23 21:35:09.993] data.WU_FadeInDelay=0 [2025-09-23 21:35:09.993] max_time_out=0 [2025-09-23 21:35:09.993] No splash screen [2025-09-23 21:35:09.993] stop dss Done [2025-09-23 21:35:09.993] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:35:10.067] /dev/mem opened. [2025-09-23 21:35:10.067] Memory mapped at address 0xffff83747000. [2025-09-23 21:35:10.067] Read at address 0x00600018 (0xffff83747018): 0x00000000 [2025-09-23 21:35:10.067] Write at address 0x00600018 (0xffff83747018): 0x00400040, readback 0x00400040 [2025-09-23 21:35:10.096] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:35:10.096] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:35:10.160] Loaded PowerVR consumer services. [2025-09-23 21:35:10.335] Waiting data available... [2025-09-23 21:35:10.335] 512+0 records in [2025-09-23 21:35:10.352] 512+0 records out [2025-09-23 21:35:10.400] Starting syslogd/klogd: done [2025-09-23 21:35:10.416] DML Start [2025-09-23 21:35:10.575] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:35:10.816] DML res1: 0 [2025-09-23 21:35:11.263] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:35:11.279] Read Success [2025-09-23 21:35:11.279] Verifying certificate... [2025-09-23 21:35:11.551] Verified OK [2025-09-23 21:35:11.567] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:35:13.254] Verified OK [2025-09-23 21:35:13.254] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:35:13.877] Verified OK [2025-09-23 21:35:13.877] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:35:16.388] fs.protected_hardlinks = 1 [2025-09-23 21:35:16.388] fs.protected_symlinks = 1 [2025-09-23 21:35:16.404] kernel.modules_disabled = 1 [2025-09-23 21:35:16.596] [2025-09-23 21:35:16.596] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:35:17.869] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:35:25.598] SBL1:1210.0.1.0 [2025-09-23 21:35:25.646] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:35:27.212] SBL2:1210.0.1.0 [2025-09-23 21:35:27.260] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:35:27.356] j-A [2025-09-23 21:35:34.710] The R5 Autosar Classic is running [2025-09-23 21:35:34.735] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:35:34.735] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:35:35.343] INIT: version 2.96 booting [2025-09-23 21:35:35.455] INIT: Entering runlevel: 5 [2025-09-23 21:35:35.615] mtd32 attached [2025-09-23 21:35:35.630] mtd28 attached [2025-09-23 21:35:35.630] mtd24 attached [2025-09-23 21:35:35.694] RTNETLINK answers: File exists [2025-09-23 21:35:35.694] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:35:35.749] ubi2:textures is mounted. [2025-09-23 21:35:35.749] ubi1:animations is mounted. [2025-09-23 21:35:35.749] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:35:35.749] ubi0:dml_code is mounted. [2025-09-23 21:35:35.749] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:35:35.749] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:35:35.749] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:35:35.749] data.LB_FadeInType0=100 [2025-09-23 21:35:35.749] data.CHLH_FadeInType0=0 [2025-09-23 21:35:35.749] data.WU_FadeInDelay=0 [2025-09-23 21:35:35.749] max_time_out=0 [2025-09-23 21:35:35.749] No splash screen [2025-09-23 21:35:35.749] stop dss Done [2025-09-23 21:35:35.833] /dev/mem opened. [2025-09-23 21:35:35.833] Memory mapped at address 0xffff96aec000. [2025-09-23 21:35:35.833] Read at address 0x00600018 (0xffff96aec018): 0x00000000 [2025-09-23 21:35:35.833] Write at address 0x00600018 (0xffff96aec018): 0x00400040, readback 0x00400040 [2025-09-23 21:35:35.833] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:35:35.833] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:35:35.912] Loaded PowerVR consumer services. [2025-09-23 21:35:36.104] Waiting data available... [2025-09-23 21:35:36.120] 512+0 records in [2025-09-23 21:35:36.120] 512+0 records out [2025-09-23 21:35:36.152] Starting syslogd/klogd: done [2025-09-23 21:35:36.168] DML Start [2025-09-23 21:35:36.359] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:35:36.552] DML res1: 0 [2025-09-23 21:35:36.967] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:35:36.983] Read Success [2025-09-23 21:35:36.983] Verifying certificate... [2025-09-23 21:35:37.271] Verified OK [2025-09-23 21:35:37.287] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:35:38.933] Verified OK [2025-09-23 21:35:38.933] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:35:39.566] Verified OK [2025-09-23 21:35:39.566] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:35:42.092] fs.protected_hardlinks = 1 [2025-09-23 21:35:42.108] fs.protected_symlinks = 1 [2025-09-23 21:35:42.108] kernel.modules_disabled = 1 [2025-09-23 21:35:42.300] [2025-09-23 21:35:42.300] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:35:43.593] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:35:51.352] SBL1:1210.0.1.0 [2025-09-23 21:35:51.400] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:35:52.967] SBL2:1210.0.1.0 [2025-09-23 21:35:53.015] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:35:53.127] j-A [2025-09-23 21:36:00.499] The R5 Autosar Classic is running [2025-09-23 21:36:00.499] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:36:00.499] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:36:01.106] INIT: version 2.96 booting [2025-09-23 21:36:01.218] INIT: Entering runlevel: 5 [2025-09-23 21:36:01.361] mtd24 attached [2025-09-23 21:36:01.377] mtd28 attached [2025-09-23 21:36:01.393] mtd32 attached [2025-09-23 21:36:01.425] ubi0:textures is mounted. [2025-09-23 21:36:01.495] RTNETLINK answers: File exists [2025-09-23 21:36:01.495] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:36:01.495] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:36:01.495] ubi1:animations is mounted. [2025-09-23 21:36:01.495] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:36:01.495] ubi2:dml_code is mounted. [2025-09-23 21:36:01.495] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:36:01.495] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:36:01.495] data.LB_FadeInType0=100 [2025-09-23 21:36:01.495] data.CHLH_FadeInType0=0 [2025-09-23 21:36:01.495] data.WU_FadeInDelay=0 [2025-09-23 21:36:01.495] max_time_out=0 [2025-09-23 21:36:01.495] No splash screen [2025-09-23 21:36:01.495] stop dss Done [2025-09-23 21:36:01.537] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:36:01.537] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:36:01.553] /dev/mem opened. [2025-09-23 21:36:01.553] Memory mapped at address 0xffffb8def000. [2025-09-23 21:36:01.579] Read at address 0x00600018 (0xffffb8def018): 0x00000000 [2025-09-23 21:36:01.579] Write at address 0x00600018 (0xffffb8def018): 0x00400040, readback 0x00400040 [2025-09-23 21:36:01.675] Loaded PowerVR consumer services. [2025-09-23 21:36:01.851] Waiting data available... [2025-09-23 21:36:01.866] 512+0 records in [2025-09-23 21:36:01.866] 512+0 records out [2025-09-23 21:36:01.914] Starting syslogd/klogd: done [2025-09-23 21:36:01.930] DML Start [2025-09-23 21:36:02.106] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:36:02.330] DML res1: 0 [2025-09-23 21:36:02.746] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:36:02.767] Read Success [2025-09-23 21:36:02.767] Verifying certificate... [2025-09-23 21:36:03.006] Verified OK [2025-09-23 21:36:03.022] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:36:04.727] Verified OK [2025-09-23 21:36:04.727] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:36:05.335] Verified OK [2025-09-23 21:36:05.335] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:36:07.957] fs.protected_hardlinks = 1 [2025-09-23 21:36:07.986] fs.protected_symlinks = 1 [2025-09-23 21:36:07.986] kernel.modules_disabled = 1 [2025-09-23 21:36:08.162] [2025-09-23 21:36:08.162] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:36:09.354] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:36:17.103] SBL1:1210.0.1.0 [2025-09-23 21:36:17.150] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 21:36:18.718] SBL2:1210.0.1.0 [2025-09-23 21:36:18.766] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:36:18.877] j-A [2025-09-23 21:36:26.216] The R5 Autosar Classic is running [2025-09-23 21:36:26.247] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:36:26.247] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:36:26.855] INIT: version 2.96 booting [2025-09-23 21:36:26.966] INIT: Entering runlevel: 5 [2025-09-23 21:36:27.126] mtd24 attached [2025-09-23 21:36:27.142] mtd32 attached [2025-09-23 21:36:27.142] mtd28 attached [2025-09-23 21:36:27.190] ubi0:textures is mounted. [2025-09-23 21:36:27.254] RTNETLINK answers: File exists [2025-09-23 21:36:27.254] ubi2:animations is mounted. [2025-09-23 21:36:27.254] ubi1:dml_code is mounted. [2025-09-23 21:36:27.254] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:36:27.254] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:36:27.254] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:36:27.254] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:36:27.254] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:36:27.254] data.LB_FadeInType0=100 [2025-09-23 21:36:27.254] data.CHLH_FadeInType0=0 [2025-09-23 21:36:27.254] data.WU_FadeInDelay=0 [2025-09-23 21:36:27.254] max_time_out=0 [2025-09-23 21:36:27.254] No splash screen [2025-09-23 21:36:27.254] stop dss Done [2025-09-23 21:36:27.302] /dev/mem opened. [2025-09-23 21:36:27.302] Memory mapped at address 0xffffad9b8000. [2025-09-23 21:36:27.334] Read at address 0x00600018 (0xffffad9b8018): 0x00000000 [2025-09-23 21:36:27.334] Write at address 0x00600018 (0xffffad9b8018): 0x00400040, readback 0x00400040 [2025-09-23 21:36:27.334] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:36:27.334] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:36:27.430] Loaded PowerVR consumer services. [2025-09-23 21:36:27.606] Waiting data available... [2025-09-23 21:36:27.622] 512+0 records in [2025-09-23 21:36:27.622] 512+0 records out [2025-09-23 21:36:27.670] Starting syslogd/klogd: done [2025-09-23 21:36:27.686] DML Start [2025-09-23 21:36:27.861] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:36:28.053] DML res1: 0 [2025-09-23 21:36:28.480] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:36:28.480] Read Success [2025-09-23 21:36:28.480] Verifying certificate... [2025-09-23 21:36:28.704] Verified OK [2025-09-23 21:36:28.720] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:36:30.422] Verified OK [2025-09-23 21:36:30.422] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:36:31.055] Verified OK [2025-09-23 21:36:31.055] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:36:33.725] fs.protected_hardlinks = 1 [2025-09-23 21:36:33.725] fs.protected_symlinks = 1 [2025-09-23 21:36:33.741] kernel.modules_disabled = 1 [2025-09-23 21:36:33.933] [2025-09-23 21:36:33.933] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:36:35.105] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:36:42.860] SBL1:1210.0.1.0 [2025-09-23 21:36:42.892] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:36:44.475] SBL2:1210.0.1.0 [2025-09-23 21:36:44.507] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 21:36:44.619] j-A [2025-09-23 21:36:51.993] The R5 Autosar Classic is running [2025-09-23 21:36:51.993] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:36:51.993] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:36:52.601] INIT: version 2.96 booting [2025-09-23 21:36:52.712] INIT: Entering runlevel: 5 [2025-09-23 21:36:52.856] mtd32 attached [2025-09-23 21:36:52.872] mtd24 attached [2025-09-23 21:36:52.888] mtd28 attached [2025-09-23 21:36:52.904] ubi0:dml_code is mounted. [2025-09-23 21:36:52.936] RTNETLINK answers: File exists [2025-09-23 21:36:52.975] ubi1:textures is mounted. [2025-09-23 21:36:52.975] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:36:52.975] ubi2:animations is mounted. [2025-09-23 21:36:52.975] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:36:52.975] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:36:52.975] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:36:52.975] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:36:53.001] data.LB_FadeInType0=100 [2025-09-23 21:36:53.001] data.CHLH_FadeInType0=0 [2025-09-23 21:36:53.001] data.WU_FadeInDelay=0 [2025-09-23 21:36:53.001] max_time_out=0 [2025-09-23 21:36:53.001] No splash screen [2025-09-23 21:36:53.001] stop dss Done [2025-09-23 21:36:53.081] /dev/mem opened. [2025-09-23 21:36:53.081] Memory mapped at address 0xffff955a0000. [2025-09-23 21:36:53.081] Read at address 0x00600018 (0xffff955a0018): 0x00000000 [2025-09-23 21:36:53.081] Write at address 0x00600018 (0xffff955a0018): 0x00400040, readback 0x00400040 [2025-09-23 21:36:53.081] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:36:53.081] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:36:53.304] Loaded PowerVR consumer services. [2025-09-23 21:36:53.336] Waiting data available... [2025-09-23 21:36:53.352] 512+0 records in [2025-09-23 21:36:53.352] 512+0 records out [2025-09-23 21:36:53.400] Starting syslogd/klogd: done [2025-09-23 21:36:53.416] DML Start [2025-09-23 21:36:53.608] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:36:53.832] DML res1: 0 [2025-09-23 21:36:54.262] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:36:54.262] Read Success [2025-09-23 21:36:54.262] Verifying certificate... [2025-09-23 21:36:54.501] Verified OK [2025-09-23 21:36:54.517] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:36:56.203] Verified OK [2025-09-23 21:36:56.203] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:36:56.804] Verified OK [2025-09-23 21:36:56.804] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:36:59.473] fs.protected_hardlinks = 1 [2025-09-23 21:36:59.473] fs.protected_symlinks = 1 [2025-09-23 21:36:59.489] kernel.modules_disabled = 1 [2025-09-23 21:36:59.681] [2025-09-23 21:36:59.681] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:37:00.837] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:37:08.592] SBL1:1210.0.1.0 [2025-09-23 21:37:08.640] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:37:10.207] SBL2:1210.0.1.0 [2025-09-23 21:37:10.255] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:37:10.366] j-A [2025-09-23 21:37:17.738] The R5 Autosar Classic is running [2025-09-23 21:37:17.738] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:37:17.738] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:37:18.346] INIT: version 2.96 booting [2025-09-23 21:37:18.458] INIT: Entering runlevel: 5 [2025-09-23 21:37:18.618] mtd28 attached [2025-09-23 21:37:18.618] mtd32 attached [2025-09-23 21:37:18.633] mtd24 attached [2025-09-23 21:37:18.665] ubi0:animations is mounted. [2025-09-23 21:37:18.681] RTNETLINK answers: File exists [2025-09-23 21:37:18.743] ubi2:textures is mounted. [2025-09-23 21:37:18.743] ubi1:dml_code is mounted. [2025-09-23 21:37:18.743] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:37:18.743] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:37:18.743] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:37:18.743] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:37:18.743] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:37:18.743] data.LB_FadeInType0=100 [2025-09-23 21:37:18.743] data.CHLH_FadeInType0=0 [2025-09-23 21:37:18.743] data.WU_FadeInDelay=0 [2025-09-23 21:37:18.743] max_time_out=0 [2025-09-23 21:37:18.743] No splash screen [2025-09-23 21:37:18.743] stop dss Done [2025-09-23 21:37:18.792] /dev/mem opened. [2025-09-23 21:37:18.792] Memory mapped at address 0xffffa0bb2000. [2025-09-23 21:37:18.818] Read at address 0x00600018 (0xffffa0bb2018): 0x00000000 [2025-09-23 21:37:18.818] Write at address 0x00600018 (0xffffa0bb2018): 0x00400040, readback 0x00400040 [2025-09-23 21:37:18.834] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:37:18.849] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:37:19.089] Loaded PowerVR consumer services. [2025-09-23 21:37:19.089] Waiting data available... [2025-09-23 21:37:19.137] 512+0 records in [2025-09-23 21:37:19.137] 512+0 records out [2025-09-23 21:37:19.169] Starting syslogd/klogd: done [2025-09-23 21:37:19.185] DML Start [2025-09-23 21:37:19.360] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:37:19.537] DML res1: 0 [2025-09-23 21:37:20.079] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:37:20.079] Read Success [2025-09-23 21:37:20.079] Verifying certificate... [2025-09-23 21:37:20.335] Verified OK [2025-09-23 21:37:20.351] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:37:21.981] Verified OK [2025-09-23 21:37:21.981] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:37:22.674] Verified OK [2025-09-23 21:37:22.674] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:37:25.311] fs.protected_hardlinks = 1 [2025-09-23 21:37:25.328] fs.protected_symlinks = 1 [2025-09-23 21:37:25.344] kernel.modules_disabled = 1 [2025-09-23 21:37:25.535] [2025-09-23 21:37:25.535] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:37:26.607] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:37:34.355] SBL1:1210.0.1.0 [2025-09-23 21:37:34.387] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:37:35.969] SBL2:1210.0.1.0 [2025-09-23 21:37:36.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:37:36.113] j-A [2025-09-23 21:37:43.469] The R5 Autosar Classic is running [2025-09-23 21:37:43.469] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:37:43.490] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:37:44.097] INIT: version 2.96 booting [2025-09-23 21:37:44.209] INIT: Entering runlevel: 5 [2025-09-23 21:37:44.369] mtd32 attached [2025-09-23 21:37:44.385] mtd24 attached [2025-09-23 21:37:44.385] mtd28 attached [2025-09-23 21:37:44.433] RTNETLINK answers: File exists [2025-09-23 21:37:44.483] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:37:44.483] ubi2:animations is mounted. [2025-09-23 21:37:44.483] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:37:44.483] ubi0:dml_code is mounted. [2025-09-23 21:37:44.483] ubi1:textures is mounted. [2025-09-23 21:37:44.483] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:37:44.483] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:37:44.483] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:37:44.483] data.LB_FadeInType0=100 [2025-09-23 21:37:44.483] data.CHLH_FadeInType0=0 [2025-09-23 21:37:44.504] data.WU_FadeInDelay=0 [2025-09-23 21:37:44.504] max_time_out=0 [2025-09-23 21:37:44.504] No splash screen [2025-09-23 21:37:44.504] stop dss Done [2025-09-23 21:37:44.579] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:37:44.579] /dev/mem opened. [2025-09-23 21:37:44.579] Memory mapped at address 0xffffb553a000. [2025-09-23 21:37:44.579] Read at address 0x00600018 (0xffffb553a018): 0x00000000 [2025-09-23 21:37:44.579] Write at address 0x00600018 (0xffffb553a018): 0x00400040, readback 0x00400040 [2025-09-23 21:37:44.579] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:37:44.803] Loaded PowerVR consumer services. [2025-09-23 21:37:44.835] Waiting data available... [2025-09-23 21:37:44.867] 512+0 records in [2025-09-23 21:37:44.867] 512+0 records out [2025-09-23 21:37:44.914] Starting syslogd/klogd: done [2025-09-23 21:37:44.930] DML Start [2025-09-23 21:37:45.107] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:37:45.330] DML res1: 0 [2025-09-23 21:37:45.747] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:37:45.763] Read Success [2025-09-23 21:37:45.763] Verifying certificate... [2025-09-23 21:37:46.018] Verified OK [2025-09-23 21:37:46.034] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:37:47.802] Verified OK [2025-09-23 21:37:47.802] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:37:48.329] Verified OK [2025-09-23 21:37:48.329] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:37:50.887] fs.protected_hardlinks = 1 [2025-09-23 21:37:50.902] fs.protected_symlinks = 1 [2025-09-23 21:37:50.902] kernel.modules_disabled = 1 [2025-09-23 21:37:51.111] [2025-09-23 21:37:51.111] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:37:52.354] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:38:00.093] SBL1:1210.0.1.0 [2025-09-23 21:38:00.141] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:38:01.708] SBL2:1210.0.1.0 [2025-09-23 21:38:01.756] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:38:01.867] j-A [2025-09-23 21:38:09.208] The R5 Autosar Classic is running [2025-09-23 21:38:09.233] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:38:09.233] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:38:09.840] INIT: version 2.96 booting [2025-09-23 21:38:09.952] INIT: Entering runlevel: 5 [2025-09-23 21:38:10.112] mtd24 attached [2025-09-23 21:38:10.112] mtd28 attached [2025-09-23 21:38:10.128] mtd32 attached [2025-09-23 21:38:10.159] ubi0:textures is mounted. [2025-09-23 21:38:10.176] ubi1:animations is mounted. [2025-09-23 21:38:10.176] RTNETLINK answers: File exists [2025-09-23 21:38:10.236] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:38:10.236] ubi2:dml_code is mounted. [2025-09-23 21:38:10.236] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:38:10.236] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:38:10.236] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:38:10.236] data.LB_FadeInType0=100 [2025-09-23 21:38:10.236] data.CHLH_FadeInType0=0 [2025-09-23 21:38:10.236] data.WU_FadeInDelay=0 [2025-09-23 21:38:10.236] max_time_out=0 [2025-09-23 21:38:10.236] No splash screen [2025-09-23 21:38:10.236] stop dss Done [2025-09-23 21:38:10.236] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:38:10.315] /dev/mem opened. [2025-09-23 21:38:10.315] Memory mapped at address 0xffff86929000. [2025-09-23 21:38:10.315] Read at address 0x00600018 (0xffff86929018): 0x00000000 [2025-09-23 21:38:10.315] Write at address 0x00600018 (0xffff86929018): 0x00400040, readback 0x00400040 [2025-09-23 21:38:10.315] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:38:10.315] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:38:10.427] Loaded PowerVR consumer services. [2025-09-23 21:38:10.587] Waiting data available... [2025-09-23 21:38:10.603] 512+0 records in [2025-09-23 21:38:10.603] 512+0 records out [2025-09-23 21:38:10.635] Starting syslogd/klogd: done [2025-09-23 21:38:10.651] DML Start [2025-09-23 21:38:10.810] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:38:11.019] DML res1: 0 [2025-09-23 21:38:11.515] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:38:11.536] Read Success [2025-09-23 21:38:11.536] Verifying certificate... [2025-09-23 21:38:11.759] Verified OK [2025-09-23 21:38:11.775] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:38:13.342] Verified OK [2025-09-23 21:38:13.358] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:38:14.026] Verified OK [2025-09-23 21:38:14.026] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:38:16.648] fs.protected_hardlinks = 1 [2025-09-23 21:38:16.664] fs.protected_symlinks = 1 [2025-09-23 21:38:16.664] kernel.modules_disabled = 1 [2025-09-23 21:38:16.855] [2025-09-23 21:38:16.855] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:38:18.061] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:38:25.836] SBL1:1210.0.1.0 [2025-09-23 21:38:25.884] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:38:27.450] SBL2:1210.0.1.0 [2025-09-23 21:38:27.498] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:38:27.611] j-A [2025-09-23 21:38:34.950] The R5 Autosar Classic is running [2025-09-23 21:38:34.981] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:38:34.981] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:38:35.588] INIT: version 2.96 booting [2025-09-23 21:38:35.700] INIT: Entering runlevel: 5 [2025-09-23 21:38:35.860] mtd24 attached [2025-09-23 21:38:35.860] mtd28 attached [2025-09-23 21:38:35.892] mtd32 attached [2025-09-23 21:38:35.908] ubi0:textures is mounted. [2025-09-23 21:38:35.924] ubi1:animations is mounted. [2025-09-23 21:38:35.983] RTNETLINK answers: File exists [2025-09-23 21:38:35.983] ubi2:dml_code is mounted. [2025-09-23 21:38:35.983] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:38:35.983] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:38:35.983] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:38:35.983] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:38:35.983] data.LB_FadeInType0=100 [2025-09-23 21:38:35.983] data.CHLH_FadeInType0=0 [2025-09-23 21:38:35.983] data.WU_FadeInDelay=0 [2025-09-23 21:38:35.983] max_time_out=0 [2025-09-23 21:38:35.983] No splash screen [2025-09-23 21:38:35.983] stop dss Done [2025-09-23 21:38:35.983] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:38:36.065] /dev/mem opened. [2025-09-23 21:38:36.065] Memory mapped at address 0xffff99886000. [2025-09-23 21:38:36.065] Read at address 0x00600018 (0xffff99886018): 0x00000000 [2025-09-23 21:38:36.065] Write at address 0x00600018 (0xffff99886018): 0x00400040, readback 0x00400040 [2025-09-23 21:38:36.065] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:38:36.081] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:38:36.178] Loaded PowerVR consumer services. [2025-09-23 21:38:36.337] Waiting data available... [2025-09-23 21:38:36.369] 512+0 records in [2025-09-23 21:38:36.369] 512+0 records out [2025-09-23 21:38:36.417] Starting syslogd/klogd: done [2025-09-23 21:38:36.417] DML Start [2025-09-23 21:38:36.625] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:38:36.833] DML res1: 0 [2025-09-23 21:38:37.264] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:38:37.280] Read Success [2025-09-23 21:38:37.280] Verifying certificate... [2025-09-23 21:38:37.504] Verified OK [2025-09-23 21:38:37.520] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:38:39.335] Verified OK [2025-09-23 21:38:39.335] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:38:39.908] Verified OK [2025-09-23 21:38:39.908] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:38:42.339] fs.protected_hardlinks = 1 [2025-09-23 21:38:42.354] fs.protected_symlinks = 1 [2025-09-23 21:38:42.354] kernel.modules_disabled = 1 [2025-09-23 21:38:42.562] [2025-09-23 21:38:42.562] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:38:43.906] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:38:51.590] SBL1:1210.0.1.0 [2025-09-23 21:38:51.638] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:38:53.205] SBL2:1210.0.1.0 [2025-09-23 21:38:53.253] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:38:53.366] j-A [2025-09-23 21:39:00.704] The R5 Autosar Classic is running [2025-09-23 21:39:00.735] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:39:00.735] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:39:01.342] INIT: version 2.96 booting [2025-09-23 21:39:01.438] INIT: Entering runlevel: 5 [2025-09-23 21:39:01.599] mtd32 attached [2025-09-23 21:39:01.615] mtd28 attached [2025-09-23 21:39:01.615] mtd24 attached [2025-09-23 21:39:01.663] RTNETLINK answers: File exists [2025-09-23 21:39:01.709] ubi0:dml_code is mounted. [2025-09-23 21:39:01.709] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:39:01.709] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:39:01.709] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:39:01.709] ubi2:textures is mounted. [2025-09-23 21:39:01.709] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:39:01.709] ubi1:animations is mounted. [2025-09-23 21:39:01.709] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:39:01.738] data.LB_FadeInType0=100 [2025-09-23 21:39:01.738] data.CHLH_FadeInType0=0 [2025-09-23 21:39:01.738] data.WU_FadeInDelay=0 [2025-09-23 21:39:01.738] max_time_out=0 [2025-09-23 21:39:01.738] No splash screen [2025-09-23 21:39:01.738] stop dss Done [2025-09-23 21:39:01.765] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:39:01.765] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:39:01.818] /dev/mem opened. [2025-09-23 21:39:01.818] Memory mapped at address 0xffffa1572000. [2025-09-23 21:39:01.818] Read at address 0x00600018 (0xffffa1572018): 0x00000000 [2025-09-23 21:39:01.818] Write at address 0x00600018 (0xffffa1572018): 0x00400040, readback 0x00400040 [2025-09-23 21:39:01.882] Loaded PowerVR consumer services. [2025-09-23 21:39:02.074] Waiting data available... [2025-09-23 21:39:02.090] 512+0 records in [2025-09-23 21:39:02.090] 512+0 records out [2025-09-23 21:39:02.138] Starting syslogd/klogd: done [2025-09-23 21:39:02.154] DML Start [2025-09-23 21:39:02.346] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:39:02.585] DML res1: 0 [2025-09-23 21:39:02.967] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:39:02.967] Read Success [2025-09-23 21:39:02.967] Verifying certificate... [2025-09-23 21:39:03.191] Verified OK [2025-09-23 21:39:03.207] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:39:04.854] Verified OK [2025-09-23 21:39:04.854] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:39:05.466] Verified OK [2025-09-23 21:39:05.466] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:39:08.216] fs.protected_hardlinks = 1 [2025-09-23 21:39:08.247] fs.protected_symlinks = 1 [2025-09-23 21:39:08.247] kernel.modules_disabled = 1 [2025-09-23 21:39:08.439] [2025-09-23 21:39:08.439] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:39:09.637] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:39:17.339] SBL1:1210.0.1.0 [2025-09-23 21:39:17.387] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:39:18.954] SBL2:1210.0.1.0 [2025-09-23 21:39:19.002] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:39:19.113] j-A [2025-09-23 21:39:26.485] The R5 Autosar Classic is running [2025-09-23 21:39:26.485] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:39:26.485] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:39:27.092] INIT: version 2.96 booting [2025-09-23 21:39:27.203] INIT: Entering runlevel: 5 [2025-09-23 21:39:27.348] mtd24 attached [2025-09-23 21:39:27.364] mtd28 attached [2025-09-23 21:39:27.380] mtd32 attached [2025-09-23 21:39:27.396] ubi0:textures is mounted. [2025-09-23 21:39:27.428] RTNETLINK answers: File exists [2025-09-23 21:39:27.487] ubi2:dml_code is mounted. [2025-09-23 21:39:27.487] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:39:27.487] ubi1:animations is mounted. [2025-09-23 21:39:27.487] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:39:27.487] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:39:27.487] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:39:27.487] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:39:27.487] data.LB_FadeInType0=100 [2025-09-23 21:39:27.487] data.CHLH_FadeInType0=0 [2025-09-23 21:39:27.487] data.WU_FadeInDelay=0 [2025-09-23 21:39:27.487] max_time_out=0 [2025-09-23 21:39:27.487] No splash screen [2025-09-23 21:39:27.487] stop dss Done [2025-09-23 21:39:27.518] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:39:27.566] /dev/mem opened. [2025-09-23 21:39:27.566] Memory mapped at address 0xffff9fedf000. [2025-09-23 21:39:27.566] Read at address 0x00600018 (0xffff9fedf018): 0x00000000 [2025-09-23 21:39:27.566] Write at address 0x00600018 (0xffff9fedf018): 0x00400040, readback 0x00400040 [2025-09-23 21:39:27.566] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:39:27.663] Loaded PowerVR consumer services. [2025-09-23 21:39:27.838] Waiting data available... [2025-09-23 21:39:27.870] 512+0 records in [2025-09-23 21:39:27.870] 512+0 records out [2025-09-23 21:39:27.902] Starting syslogd/klogd: done [2025-09-23 21:39:27.919] DML Start [2025-09-23 21:39:28.127] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:39:28.366] DML res1: 0 [2025-09-23 21:39:28.743] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:39:28.743] Read Success [2025-09-23 21:39:28.743] Verifying certificate... [2025-09-23 21:39:28.983] Verified OK [2025-09-23 21:39:28.999] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:39:30.710] Verified OK [2025-09-23 21:39:30.726] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:39:31.317] Verified OK [2025-09-23 21:39:31.317] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:39:33.972] fs.protected_hardlinks = 1 [2025-09-23 21:39:33.987] fs.protected_symlinks = 1 [2025-09-23 21:39:33.987] kernel.modules_disabled = 1 [2025-09-23 21:39:34.163] [2025-09-23 21:39:34.179] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:39:35.427] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:39:43.088] SBL1:1210.0.1.0 [2025-09-23 21:39:43.136] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:39:44.704] SBL2:1210.0.1.0 [2025-09-23 21:39:44.751] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:39:44.863] j-A [2025-09-23 21:39:52.233] The R5 Autosar Classic is running [2025-09-23 21:39:52.233] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:39:52.233] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:39:52.840] INIT: version 2.96 booting [2025-09-23 21:39:52.952] INIT: Entering runlevel: 5 [2025-09-23 21:39:53.096] mtd24 attached [2025-09-23 21:39:53.112] mtd32 attached [2025-09-23 21:39:53.128] mtd28 attached [2025-09-23 21:39:53.208] RTNETLINK answers: File exists [2025-09-23 21:39:53.208] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:39:53.208] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:39:53.208] ubi0:textures is mounted. [2025-09-23 21:39:53.208] ubi2:animations is mounted. [2025-09-23 21:39:53.208] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:39:53.208] ubi1:dml_code is mounted. [2025-09-23 21:39:53.208] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:39:53.208] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:39:53.257] data.LB_FadeInType0=100 [2025-09-23 21:39:53.257] data.CHLH_FadeInType0=0 [2025-09-23 21:39:53.257] data.WU_FadeInDelay=0 [2025-09-23 21:39:53.257] max_time_out=0 [2025-09-23 21:39:53.257] No splash screen [2025-09-23 21:39:53.257] stop dss Done [2025-09-23 21:39:53.257] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:39:53.257] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:39:53.290] /dev/mem opened. [2025-09-23 21:39:53.290] Memory mapped at address 0xffff9b6d8000. [2025-09-23 21:39:53.316] Read at address 0x00600018 (0xffff9b6d8018): 0x00000000 [2025-09-23 21:39:53.316] Write at address 0x00600018 (0xffff9b6d8018): 0x00400040, readback 0x00400040 [2025-09-23 21:39:53.523] Loaded PowerVR consumer services. [2025-09-23 21:39:53.604] Waiting data available... [2025-09-23 21:39:53.620] 512+0 records in [2025-09-23 21:39:53.636] 512+0 records out [2025-09-23 21:39:53.652] Starting syslogd/klogd: done [2025-09-23 21:39:53.684] DML Start [2025-09-23 21:39:53.827] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:39:54.019] DML res1: 0 [2025-09-23 21:39:54.509] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:39:54.509] Read Success [2025-09-23 21:39:54.509] Verifying certificate... [2025-09-23 21:39:54.748] Verified OK [2025-09-23 21:39:54.748] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:39:56.428] Verified OK [2025-09-23 21:39:56.443] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:39:57.016] Verified OK [2025-09-23 21:39:57.016] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:39:59.399] fs.protected_hardlinks = 1 [2025-09-23 21:39:59.415] fs.protected_symlinks = 1 [2025-09-23 21:39:59.415] kernel.modules_disabled = 1 [2025-09-23 21:39:59.607] [2025-09-23 21:39:59.607] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:40:01.099] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:40:08.838] SBL1:1210.0.1.0 [2025-09-23 21:40:08.870] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:40:10.452] SBL2:1210.0.1.0 [2025-09-23 21:40:10.484] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:40:10.597] j-A [2025-09-23 21:40:17.972] The R5 Autosar Classic is running [2025-09-23 21:40:17.972] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:40:17.972] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:40:18.579] INIT: version 2.96 booting [2025-09-23 21:40:18.691] INIT: Entering runlevel: 5 [2025-09-23 21:40:18.835] mtd24 attached [2025-09-23 21:40:18.851] mtd28 attached [2025-09-23 21:40:18.867] mtd32 attached [2025-09-23 21:40:18.915] ubi0:textures is mounted. [2025-09-23 21:40:18.915] RTNETLINK answers: File exists [2025-09-23 21:40:18.974] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:40:18.974] ubi1:animations is mounted. [2025-09-23 21:40:18.974] ubi2:dml_code is mounted. [2025-09-23 21:40:18.974] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:40:18.974] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:40:18.974] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:40:18.974] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:40:18.974] data.LB_FadeInType0=100 [2025-09-23 21:40:18.974] data.CHLH_FadeInType0=0 [2025-09-23 21:40:18.974] data.WU_FadeInDelay=0 [2025-09-23 21:40:18.974] max_time_out=0 [2025-09-23 21:40:18.974] No splash screen [2025-09-23 21:40:18.974] stop dss Done [2025-09-23 21:40:19.012] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:40:19.012] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:40:19.050] /dev/mem opened. [2025-09-23 21:40:19.050] Memory mapped at address 0xffffa0427000. [2025-09-23 21:40:19.050] Read at address 0x00600018 (0xffffa0427018): 0x00000000 [2025-09-23 21:40:19.050] Write at address 0x00600018 (0xffffa0427018): 0x00400040, readback 0x00400040 [2025-09-23 21:40:19.146] Loaded PowerVR consumer services. [2025-09-23 21:40:19.321] Waiting data available... [2025-09-23 21:40:19.354] 512+0 records in [2025-09-23 21:40:19.354] 512+0 records out [2025-09-23 21:40:19.402] Starting syslogd/klogd: done [2025-09-23 21:40:19.418] DML Start [2025-09-23 21:40:19.561] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:40:19.801] DML res1: 0 [2025-09-23 21:40:20.226] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:40:20.226] Read Success [2025-09-23 21:40:20.226] Verifying certificate... [2025-09-23 21:40:20.467] Verified OK [2025-09-23 21:40:20.483] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:40:22.081] Verified OK [2025-09-23 21:40:22.097] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:40:22.687] Verified OK [2025-09-23 21:40:22.687] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:40:25.389] fs.protected_hardlinks = 1 [2025-09-23 21:40:25.389] fs.protected_symlinks = 1 [2025-09-23 21:40:25.389] kernel.modules_disabled = 1 [2025-09-23 21:40:25.581] [2025-09-23 21:40:25.581] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:40:26.853] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:40:34.579] SBL1:1210.0.1.0 [2025-09-23 21:40:34.627] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:40:36.193] SBL2:1210.0.1.0 [2025-09-23 21:40:36.241] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:40:36.338] j-A [2025-09-23 21:40:43.692] The R5 Autosar Classic is running [2025-09-23 21:40:43.717] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:40:43.717] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:40:44.324] INIT: version 2.96 booting [2025-09-23 21:40:44.436] INIT: Entering runlevel: 5 [2025-09-23 21:40:44.580] mtd28 attached [2025-09-23 21:40:44.596] mtd24 attached [2025-09-23 21:40:44.612] mtd32 attached [2025-09-23 21:40:44.722] RTNETLINK answers: File exists [2025-09-23 21:40:44.722] ubi0:animations is mounted. [2025-09-23 21:40:44.722] ubi1:textures is mounted. [2025-09-23 21:40:44.722] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:40:44.722] ubi2:dml_code is mounted. [2025-09-23 21:40:44.722] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:40:44.722] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:40:44.722] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:40:44.722] data.LB_FadeInType0=100 [2025-09-23 21:40:44.722] data.CHLH_FadeInType0=0 [2025-09-23 21:40:44.722] data.WU_FadeInDelay=0 [2025-09-23 21:40:44.722] max_time_out=0 [2025-09-23 21:40:44.722] No splash screen [2025-09-23 21:40:44.722] stop dss Done [2025-09-23 21:40:44.722] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:40:44.770] /dev/mem opened. [2025-09-23 21:40:44.770] Memory mapped at address 0xffffac852000. [2025-09-23 21:40:44.770] Read at address 0x00600018 (0xffffac852018): 0x00000000 [2025-09-23 21:40:44.797] Write at address 0x00600018 (0xffffac852018): 0x00400040, readback 0x00400040 [2025-09-23 21:40:44.797] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:40:44.812] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:40:44.924] Loaded PowerVR consumer services. [2025-09-23 21:40:45.067] Waiting data available... [2025-09-23 21:40:45.100] 512+0 records in [2025-09-23 21:40:45.100] 512+0 records out [2025-09-23 21:40:45.148] Starting syslogd/klogd: done [2025-09-23 21:40:45.164] DML Start [2025-09-23 21:40:45.307] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:40:45.484] DML res1: 0 [2025-09-23 21:40:46.011] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:40:46.011] Read Success [2025-09-23 21:40:46.027] Verifying certificate... [2025-09-23 21:40:46.251] Verified OK [2025-09-23 21:40:46.267] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:40:48.010] Verified OK [2025-09-23 21:40:48.010] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:40:48.585] Verified OK [2025-09-23 21:40:48.585] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:40:51.111] fs.protected_hardlinks = 1 [2025-09-23 21:40:51.138] fs.protected_symlinks = 1 [2025-09-23 21:40:51.138] kernel.modules_disabled = 1 [2025-09-23 21:40:51.330] [2025-09-23 21:40:51.330] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:40:52.567] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:41:00.318] SBL1:1210.0.1.0 [2025-09-23 21:41:00.350] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:41:01.933] SBL2:1210.0.1.0 [2025-09-23 21:41:01.965] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:41:02.077] j-A [2025-09-23 21:41:09.450] The R5 Autosar Classic is running [2025-09-23 21:41:09.450] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:41:09.450] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:41:10.058] INIT: version 2.96 booting [2025-09-23 21:41:10.170] INIT: Entering runlevel: 5 [2025-09-23 21:41:10.329] mtd28 attached [2025-09-23 21:41:10.329] mtd24 attached [2025-09-23 21:41:10.345] mtd32 attached [2025-09-23 21:41:10.393] RTNETLINK answers: File exists [2025-09-23 21:41:10.461] ubi0:animations is mounted. [2025-09-23 21:41:10.461] ubi2:dml_code is mounted. [2025-09-23 21:41:10.461] ubi1:textures is mounted. [2025-09-23 21:41:10.461] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:41:10.461] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:41:10.461] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:41:10.461] data.LB_FadeInType0=100 [2025-09-23 21:41:10.461] data.CHLH_FadeInType0=0 [2025-09-23 21:41:10.461] data.WU_FadeInDelay=0 [2025-09-23 21:41:10.461] max_time_out=0 [2025-09-23 21:41:10.461] No splash screen [2025-09-23 21:41:10.461] stop dss Done [2025-09-23 21:41:10.461] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:41:10.461] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:41:10.509] /dev/mem opened. [2025-09-23 21:41:10.509] Memory mapped at address 0xffffba685000. [2025-09-23 21:41:10.542] Read at address 0x00600018 (0xffffba685018): 0x00000000 [2025-09-23 21:41:10.542] Write at address 0x00600018 (0xffffba685018): 0x00400040, readback 0x00400040 [2025-09-23 21:41:10.542] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:41:10.558] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:41:10.813] Loaded PowerVR consumer services. [2025-09-23 21:41:10.845] Waiting data available... [2025-09-23 21:41:10.877] 512+0 records in [2025-09-23 21:41:10.877] 512+0 records out [2025-09-23 21:41:10.893] Starting syslogd/klogd: done [2025-09-23 21:41:10.925] DML Start [2025-09-23 21:41:11.101] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:41:11.341] DML res1: 0 [2025-09-23 21:41:11.772] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:41:11.772] Read Success [2025-09-23 21:41:11.772] Verifying certificate... [2025-09-23 21:41:12.027] Verified OK [2025-09-23 21:41:12.044] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:41:13.815] Verified OK [2025-09-23 21:41:13.815] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:41:14.342] Verified OK [2025-09-23 21:41:14.342] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:41:16.852] fs.protected_hardlinks = 1 [2025-09-23 21:41:16.852] fs.protected_symlinks = 1 [2025-09-23 21:41:16.869] kernel.modules_disabled = 1 [2025-09-23 21:41:17.060] [2025-09-23 21:41:17.060] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:41:18.379] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:41:26.073] SBL1:1210.0.1.0 [2025-09-23 21:41:26.105] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:41:27.688] SBL2:1210.0.1.0 [2025-09-23 21:41:27.736] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:41:27.832] j-A [2025-09-23 21:41:35.187] The R5 Autosar Classic is running [2025-09-23 21:41:35.187] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:41:35.208] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:41:35.816] INIT: version 2.96 booting [2025-09-23 21:41:35.928] INIT: Entering runlevel: 5 [2025-09-23 21:41:36.088] mtd24 attached [2025-09-23 21:41:36.088] mtd28 attached [2025-09-23 21:41:36.104] mtd32 attached [2025-09-23 21:41:36.136] ubi0:textures is mounted. [2025-09-23 21:41:36.152] RTNETLINK answers: File exists [2025-09-23 21:41:36.152] ubi1:animations is mounted. [2025-09-23 21:41:36.188] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:41:36.188] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:41:36.188] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:41:36.188] ubi2:dml_code is mounted. [2025-09-23 21:41:36.188] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:41:36.188] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:41:36.214] data.LB_FadeInType0=100 [2025-09-23 21:41:36.214] data.CHLH_FadeInType0=0 [2025-09-23 21:41:36.214] data.WU_FadeInDelay=0 [2025-09-23 21:41:36.214] max_time_out=0 [2025-09-23 21:41:36.214] No splash screen [2025-09-23 21:41:36.214] stop dss Done [2025-09-23 21:41:36.230] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:41:36.246] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:41:36.286] /dev/mem opened. [2025-09-23 21:41:36.286] Memory mapped at address 0xffffa9352000. [2025-09-23 21:41:36.286] Read at address 0x00600018 (0xffffa9352018): 0x00000000 [2025-09-23 21:41:36.286] Write at address 0x00600018 (0xffffa9352018): 0x00400040, readback 0x00400040 [2025-09-23 21:41:36.462] Loaded PowerVR consumer services. [2025-09-23 21:41:36.574] Waiting data available... [2025-09-23 21:41:36.590] 512+0 records in [2025-09-23 21:41:36.590] 512+0 records out [2025-09-23 21:41:36.639] Starting syslogd/klogd: done [2025-09-23 21:41:36.655] DML Start [2025-09-23 21:41:36.830] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:41:37.086] DML res1: 0 [2025-09-23 21:41:37.421] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:41:37.442] Read Success [2025-09-23 21:41:37.442] Verifying certificate... [2025-09-23 21:41:37.698] Verified OK [2025-09-23 21:41:37.714] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:41:39.482] Verified OK [2025-09-23 21:41:39.482] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:41:40.104] Verified OK [2025-09-23 21:41:40.104] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:41:42.647] fs.protected_hardlinks = 1 [2025-09-23 21:41:42.647] fs.protected_symlinks = 1 [2025-09-23 21:41:42.662] kernel.modules_disabled = 1 [2025-09-23 21:41:42.854] [2025-09-23 21:41:42.854] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:41:44.107] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:41:51.816] SBL1:1210.0.1.0 [2025-09-23 21:41:51.848] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:41:53.430] SBL2:1210.0.1.0 [2025-09-23 21:41:53.463] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:41:53.574] j-A [2025-09-23 21:42:00.949] The R5 Autosar Classic is running [2025-09-23 21:42:00.949] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:42:00.949] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:42:01.556] INIT: version 2.96 booting [2025-09-23 21:42:01.668] INIT: Entering runlevel: 5 [2025-09-23 21:42:01.828] mtd28 attached [2025-09-23 21:42:01.828] mtd24 attached [2025-09-23 21:42:01.844] mtd32 attached [2025-09-23 21:42:01.877] ubi0:animations is mounted. [2025-09-23 21:42:01.893] ubi1:textures is mounted. [2025-09-23 21:42:01.909] ubi2:dml_code is mounted. [2025-09-23 21:42:01.909] RTNETLINK answers: File exists [2025-09-23 21:42:01.962] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:42:01.962] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:42:01.962] data.LB_FadeInType0=100 [2025-09-23 21:42:01.962] data.CHLH_FadeInType0=0 [2025-09-23 21:42:01.962] data.WU_FadeInDelay=0 [2025-09-23 21:42:01.962] max_time_out=0 [2025-09-23 21:42:01.962] No splash screen [2025-09-23 21:42:01.962] stop dss Done [2025-09-23 21:42:01.962] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:42:01.962] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:42:01.962] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:42:01.994] /dev/mem opened. [2025-09-23 21:42:01.994] Memory mapped at address 0xffff8263c000. [2025-09-23 21:42:02.020] Read at address 0x00600018 (0xffff8263c018): 0x00000000 [2025-09-23 21:42:02.020] Write at address 0x00600018 (0xffff8263c018): 0x00400040, readback 0x00400040 [2025-09-23 21:42:02.036] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:42:02.052] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:42:02.196] Loaded PowerVR consumer services. [2025-09-23 21:42:02.324] Waiting data available... [2025-09-23 21:42:02.340] 512+0 records in [2025-09-23 21:42:02.340] 512+0 records out [2025-09-23 21:42:02.388] Starting syslogd/klogd: done [2025-09-23 21:42:02.404] DML Start [2025-09-23 21:42:02.564] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:42:02.756] DML res1: 0 [2025-09-23 21:42:03.242] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:42:03.242] Read Success [2025-09-23 21:42:03.242] Verifying certificate... [2025-09-23 21:42:03.482] Verified OK [2025-09-23 21:42:03.498] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:42:05.129] Verified OK [2025-09-23 21:42:05.129] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:42:05.680] Verified OK [2025-09-23 21:42:05.680] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:42:08.093] fs.protected_hardlinks = 1 [2025-09-23 21:42:08.124] fs.protected_symlinks = 1 [2025-09-23 21:42:08.124] kernel.modules_disabled = 1 [2025-09-23 21:42:08.333] [2025-09-23 21:42:08.333] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:42:09.830] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:42:17.544] SBL1:1210.0.1.0 [2025-09-23 21:42:17.592] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:42:19.158] SBL2:1210.0.1.0 [2025-09-23 21:42:19.206] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:42:19.318] j-A [2025-09-23 21:42:26.659] The R5 Autosar Classic is running [2025-09-23 21:42:26.683] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:42:26.683] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:42:27.291] INIT: version 2.96 booting [2025-09-23 21:42:27.403] INIT: Entering runlevel: 5 [2025-09-23 21:42:27.546] mtd28 attached [2025-09-23 21:42:27.562] mtd24 attached [2025-09-23 21:42:27.578] mtd32 attached [2025-09-23 21:42:27.594] ubi0:animations is mounted. [2025-09-23 21:42:27.610] ubi1:textures is mounted. [2025-09-23 21:42:27.626] RTNETLINK answers: File exists [2025-09-23 21:42:27.683] ubi2:dml_code is mounted. [2025-09-23 21:42:27.683] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:42:27.683] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:42:27.683] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:42:27.683] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:42:27.683] data.LB_FadeInType0=100 [2025-09-23 21:42:27.683] data.CHLH_FadeInType0=0 [2025-09-23 21:42:27.683] data.WU_FadeInDelay=0 [2025-09-23 21:42:27.683] max_time_out=0 [2025-09-23 21:42:27.683] No splash screen [2025-09-23 21:42:27.683] stop dss Done [2025-09-23 21:42:27.683] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:42:27.732] /dev/mem opened. [2025-09-23 21:42:27.732] Memory mapped at address 0xffffbb561000. [2025-09-23 21:42:27.732] Read at address 0x00600018 (0xffffbb561018): 0x00000000 [2025-09-23 21:42:27.732] Write at address 0x00600018 (0xffffbb561018): 0x00400040, readback 0x00400040 [2025-09-23 21:42:27.794] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:42:27.794] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:42:28.033] Loaded PowerVR consumer services. [2025-09-23 21:42:28.082] Waiting data available... [2025-09-23 21:42:28.097] 512+0 records in [2025-09-23 21:42:28.113] 512+0 records out [2025-09-23 21:42:28.129] Starting syslogd/klogd: done [2025-09-23 21:42:28.145] DML Start [2025-09-23 21:42:28.321] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:42:28.529] DML res1: 0 [2025-09-23 21:42:28.944] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:42:28.965] Read Success [2025-09-23 21:42:28.965] Verifying certificate... [2025-09-23 21:42:29.253] Verified OK [2025-09-23 21:42:29.269] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:42:30.916] Verified OK [2025-09-23 21:42:30.916] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:42:31.497] Verified OK [2025-09-23 21:42:31.497] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:42:34.151] fs.protected_hardlinks = 1 [2025-09-23 21:42:34.151] fs.protected_symlinks = 1 [2025-09-23 21:42:34.167] kernel.modules_disabled = 1 [2025-09-23 21:42:34.359] [2025-09-23 21:42:34.359] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:42:35.568] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:42:43.278] SBL1:1210.0.1.0 [2025-09-23 21:42:43.310] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:42:44.892] SBL2:1210.0.1.0 [2025-09-23 21:42:44.940] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:42:45.037] j-A [2025-09-23 21:42:52.391] The R5 Autosar Classic is running [2025-09-23 21:42:52.391] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:42:52.412] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:42:53.020] INIT: version 2.96 booting [2025-09-23 21:42:53.132] INIT: Entering runlevel: 5 [2025-09-23 21:42:53.276] mtd24 attached [2025-09-23 21:42:53.291] mtd28 attached [2025-09-23 21:42:53.307] mtd32 attached [2025-09-23 21:42:53.394] RTNETLINK answers: File exists [2025-09-23 21:42:53.394] ubi0:textures is mounted. [2025-09-23 21:42:53.394] ubi1:animations is mounted. [2025-09-23 21:42:53.394] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:42:53.394] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:42:53.394] ubi2:dml_code is mounted. [2025-09-23 21:42:53.394] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:42:53.394] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:42:53.394] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:42:53.415] data.LB_FadeInType0=100 [2025-09-23 21:42:53.415] data.CHLH_FadeInType0=0 [2025-09-23 21:42:53.415] data.WU_FadeInDelay=0 [2025-09-23 21:42:53.415] max_time_out=0 [2025-09-23 21:42:53.415] No splash screen [2025-09-23 21:42:53.415] stop dss Done [2025-09-23 21:42:53.461] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:42:53.461] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:42:53.500] /dev/mem opened. [2025-09-23 21:42:53.500] Memory mapped at address 0xffffbf069000. [2025-09-23 21:42:53.500] Read at address 0x00600018 (0xffffbf069018): 0x00000000 [2025-09-23 21:42:53.500] Write at address 0x00600018 (0xffffbf069018): 0x00400040, readback 0x00400040 [2025-09-23 21:42:53.595] Loaded PowerVR consumer services. [2025-09-23 21:42:53.772] Waiting data available... [2025-09-23 21:42:53.788] 512+0 records in [2025-09-23 21:42:53.788] 512+0 records out [2025-09-23 21:42:53.835] Starting syslogd/klogd: done [2025-09-23 21:42:53.852] DML Start [2025-09-23 21:42:54.012] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:42:54.219] DML res1: 0 [2025-09-23 21:42:54.695] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:42:54.695] Read Success [2025-09-23 21:42:54.695] Verifying certificate... [2025-09-23 21:42:54.919] Verified OK [2025-09-23 21:42:54.935] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:42:56.702] Verified OK [2025-09-23 21:42:56.702] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:42:57.220] Verified OK [2025-09-23 21:42:57.220] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:42:59.681] fs.protected_hardlinks = 1 [2025-09-23 21:42:59.681] fs.protected_symlinks = 1 [2025-09-23 21:42:59.681] kernel.modules_disabled = 1 [2025-09-23 21:42:59.856] [2025-09-23 21:42:59.856] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:43:01.323] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:43:09.021] SBL1:1210.0.1.0 [2025-09-23 21:43:09.069] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:43:10.636] SBL2:1210.0.1.0 [2025-09-23 21:43:10.684] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:43:10.795] j-A [2025-09-23 21:43:18.134] The R5 Autosar Classic is running [2025-09-23 21:43:18.165] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:43:18.165] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:43:18.773] INIT: version 2.96 booting [2025-09-23 21:43:18.885] INIT: Entering runlevel: 5 [2025-09-23 21:43:19.046] mtd24 attached [2025-09-23 21:43:19.046] mtd28 attached [2025-09-23 21:43:19.061] mtd32 attached [2025-09-23 21:43:19.109] ubi0:textures is mounted. [2025-09-23 21:43:19.109] RTNETLINK answers: File exists [2025-09-23 21:43:19.146] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:43:19.146] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:43:19.146] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:43:19.146] ubi1:animations is mounted. [2025-09-23 21:43:19.146] ubi2:dml_code is mounted. [2025-09-23 21:43:19.146] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:43:19.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:43:19.172] data.LB_FadeInType0=100 [2025-09-23 21:43:19.172] data.CHLH_FadeInType0=0 [2025-09-23 21:43:19.172] data.WU_FadeInDelay=0 [2025-09-23 21:43:19.172] max_time_out=0 [2025-09-23 21:43:19.172] No splash screen [2025-09-23 21:43:19.172] stop dss Done [2025-09-23 21:43:19.188] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:43:19.188] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:43:19.255] /dev/mem opened. [2025-09-23 21:43:19.255] Memory mapped at address 0xffffb87e1000. [2025-09-23 21:43:19.255] Read at address 0x00600018 (0xffffb87e1018): 0x00000000 [2025-09-23 21:43:19.255] Write at address 0x00600018 (0xffffb87e1018): 0x00400040, readback 0x00400040 [2025-09-23 21:43:19.350] Loaded PowerVR consumer services. [2025-09-23 21:43:19.511] Waiting data available... [2025-09-23 21:43:19.543] 512+0 records in [2025-09-23 21:43:19.543] 512+0 records out [2025-09-23 21:43:19.574] Starting syslogd/klogd: done [2025-09-23 21:43:19.590] DML Start [2025-09-23 21:43:19.751] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:43:19.943] DML res1: 0 [2025-09-23 21:43:20.470] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:43:20.491] Read Success [2025-09-23 21:43:20.491] Verifying certificate... [2025-09-23 21:43:20.715] Verified OK [2025-09-23 21:43:20.747] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:43:22.352] Verified OK [2025-09-23 21:43:22.352] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:43:22.955] Verified OK [2025-09-23 21:43:22.955] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:43:25.610] fs.protected_hardlinks = 1 [2025-09-23 21:43:25.626] fs.protected_symlinks = 1 [2025-09-23 21:43:25.626] kernel.modules_disabled = 1 [2025-09-23 21:43:25.817] [2025-09-23 21:43:25.817] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:43:27.024] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:43:34.770] SBL1:1210.0.1.0 [2025-09-23 21:43:34.817] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:43:36.384] SBL2:1210.0.1.0 [2025-09-23 21:43:36.432] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:43:36.529] j-A [2025-09-23 21:43:43.882] The R5 Autosar Classic is running [2025-09-23 21:43:43.907] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:43:43.907] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:43:44.514] INIT: version 2.96 booting [2025-09-23 21:43:44.627] INIT: Entering runlevel: 5 [2025-09-23 21:43:44.786] mtd24 attached [2025-09-23 21:43:44.786] mtd28 attached [2025-09-23 21:43:44.802] mtd32 attached [2025-09-23 21:43:44.834] ubi0:textures is mounted. [2025-09-23 21:43:44.920] RTNETLINK answers: File exists [2025-09-23 21:43:44.920] ubi1:animations is mounted. [2025-09-23 21:43:44.920] ubi2:dml_code is mounted. [2025-09-23 21:43:44.920] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:43:44.920] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:43:44.920] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:43:44.920] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:43:44.920] data.LB_FadeInType0=100 [2025-09-23 21:43:44.920] data.CHLH_FadeInType0=0 [2025-09-23 21:43:44.920] data.WU_FadeInDelay=0 [2025-09-23 21:43:44.920] max_time_out=0 [2025-09-23 21:43:44.920] No splash screen [2025-09-23 21:43:44.920] stop dss Done [2025-09-23 21:43:44.920] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:43:44.994] /dev/mem opened. [2025-09-23 21:43:44.994] Memory mapped at address 0xffffa0837000. [2025-09-23 21:43:44.994] Read at address 0x00600018 (0xffffa0837018): 0x00000000 [2025-09-23 21:43:44.994] Write at address 0x00600018 (0xffffa0837018): 0x00400040, readback 0x00400040 [2025-09-23 21:43:45.025] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:43:45.041] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:43:45.138] Loaded PowerVR consumer services. [2025-09-23 21:43:45.281] Waiting data available... [2025-09-23 21:43:45.298] 512+0 records in [2025-09-23 21:43:45.298] 512+0 records out [2025-09-23 21:43:45.346] Starting syslogd/klogd: done [2025-09-23 21:43:45.362] DML Start [2025-09-23 21:43:45.585] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:43:45.841] DML res1: 0 [2025-09-23 21:43:46.129] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:43:46.129] Read Success [2025-09-23 21:43:46.145] Verifying certificate... [2025-09-23 21:43:46.368] Verified OK [2025-09-23 21:43:46.385] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:43:48.008] Verified OK [2025-09-23 21:43:48.008] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:43:48.696] Verified OK [2025-09-23 21:43:48.696] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:43:51.367] fs.protected_hardlinks = 1 [2025-09-23 21:43:51.397] fs.protected_symlinks = 1 [2025-09-23 21:43:51.397] kernel.modules_disabled = 1 [2025-09-23 21:43:51.573] [2025-09-23 21:43:51.573] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:43:52.859] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:44:00.515] SBL1:1210.0.1.0 [2025-09-23 21:44:00.563] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:44:02.128] SBL2:1210.0.1.0 [2025-09-23 21:44:02.176] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:44:02.289] j-A [2025-09-23 21:44:09.660] The R5 Autosar Classic is running [2025-09-23 21:44:09.660] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:44:09.660] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:44:10.267] INIT: version 2.96 booting [2025-09-23 21:44:10.379] INIT: Entering runlevel: 5 [2025-09-23 21:44:10.523] mtd24 attached [2025-09-23 21:44:10.540] mtd32 attached [2025-09-23 21:44:10.556] mtd28 attached [2025-09-23 21:44:10.572] ubi0:textures is mounted. [2025-09-23 21:44:10.604] ubi2:animations is mounted. [2025-09-23 21:44:10.604] RTNETLINK answers: File exists [2025-09-23 21:44:10.662] ubi1:dml_code is mounted. [2025-09-23 21:44:10.662] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:44:10.662] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:44:10.662] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:44:10.662] data.LB_FadeInType0=100 [2025-09-23 21:44:10.662] data.CHLH_FadeInType0=0 [2025-09-23 21:44:10.662] data.WU_FadeInDelay=0 [2025-09-23 21:44:10.662] max_time_out=0 [2025-09-23 21:44:10.662] No splash screen [2025-09-23 21:44:10.662] stop dss Done [2025-09-23 21:44:10.662] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:44:10.662] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:44:10.712] /dev/mem opened. [2025-09-23 21:44:10.712] Memory mapped at address 0xffffaeae0000. [2025-09-23 21:44:10.712] Read at address 0x00600018 (0xffffaeae0018): 0x00000000 [2025-09-23 21:44:10.712] Write at address 0x00600018 (0xffffaeae0018): 0x00400040, readback 0x00400040 [2025-09-23 21:44:10.735] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:44:10.735] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:44:10.991] Waiting data available... [2025-09-23 21:44:11.007] Loaded PowerVR consumer services. [2025-09-23 21:44:11.039] 512+0 records in [2025-09-23 21:44:11.055] 512+0 records out [2025-09-23 21:44:11.071] Starting syslogd/klogd: done [2025-09-23 21:44:11.087] DML Start [2025-09-23 21:44:11.279] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:44:11.471] DML res1: 0 [2025-09-23 21:44:11.902] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:44:11.919] Read Success [2025-09-23 21:44:11.919] Verifying certificate... [2025-09-23 21:44:12.158] Verified OK [2025-09-23 21:44:12.174] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:44:13.898] Verified OK [2025-09-23 21:44:13.898] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:44:14.512] Verified OK [2025-09-23 21:44:14.512] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:44:17.102] fs.protected_hardlinks = 1 [2025-09-23 21:44:17.118] fs.protected_symlinks = 1 [2025-09-23 21:44:17.118] kernel.modules_disabled = 1 [2025-09-23 21:44:17.310] [2025-09-23 21:44:17.310] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:44:18.515] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:44:26.254] SBL1:1210.0.1.0 [2025-09-23 21:44:26.302] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:44:27.869] SBL2:1210.0.1.0 [2025-09-23 21:44:27.916] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:44:28.028] j-A [2025-09-23 21:44:35.400] The R5 Autosar Classic is running [2025-09-23 21:44:35.400] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:44:35.400] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:44:36.007] INIT: version 2.96 booting [2025-09-23 21:44:36.119] INIT: Entering runlevel: 5 [2025-09-23 21:44:36.278] mtd24 attached [2025-09-23 21:44:36.278] mtd28 attached [2025-09-23 21:44:36.294] mtd32 attached [2025-09-23 21:44:36.327] ubi0:textures is mounted. [2025-09-23 21:44:36.343] RTNETLINK answers: File exists [2025-09-23 21:44:36.409] ubi1:animations is mounted. [2025-09-23 21:44:36.409] ubi2:dml_code is mounted. [2025-09-23 21:44:36.409] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:44:36.409] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:44:36.409] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:44:36.409] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:44:36.409] data.LB_FadeInType0=100 [2025-09-23 21:44:36.409] data.CHLH_FadeInType0=0 [2025-09-23 21:44:36.409] data.WU_FadeInDelay=0 [2025-09-23 21:44:36.409] max_time_out=0 [2025-09-23 21:44:36.409] No splash screen [2025-09-23 21:44:36.409] stop dss Done [2025-09-23 21:44:36.409] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:44:36.484] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:44:36.484] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:44:36.484] /dev/mem opened. [2025-09-23 21:44:36.484] Memory mapped at address 0xffff93ae1000. [2025-09-23 21:44:36.484] Read at address 0x00600018 (0xffff93ae1018): 0x00000000 [2025-09-23 21:44:36.484] Write at address 0x00600018 (0xffff93ae1018): 0x00400040, readback 0x00400040 [2025-09-23 21:44:36.661] Loaded PowerVR consumer services. [2025-09-23 21:44:36.756] Waiting data available... [2025-09-23 21:44:36.788] 512+0 records in [2025-09-23 21:44:36.788] 512+0 records out [2025-09-23 21:44:36.804] Starting syslogd/klogd: done [2025-09-23 21:44:36.836] DML Start [2025-09-23 21:44:36.980] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:44:37.204] DML res1: 0 [2025-09-23 21:44:37.651] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:44:37.672] Read Success [2025-09-23 21:44:37.672] Verifying certificate... [2025-09-23 21:44:37.913] Verified OK [2025-09-23 21:44:37.945] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:44:39.665] Verified OK [2025-09-23 21:44:39.665] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:44:40.233] Verified OK [2025-09-23 21:44:40.233] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:44:42.711] fs.protected_hardlinks = 1 [2025-09-23 21:44:42.727] fs.protected_symlinks = 1 [2025-09-23 21:44:42.743] kernel.modules_disabled = 1 [2025-09-23 21:44:42.951] [2025-09-23 21:44:42.951] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:44:44.224] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:44:52.024] SBL1:1210.0.1.0 [2025-09-23 21:44:52.072] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:44:53.639] SBL2:1210.0.1.0 [2025-09-23 21:44:53.687] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:44:53.782] j-A [2025-09-23 21:45:01.137] The R5 Autosar Classic is running [2025-09-23 21:45:01.162] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:45:01.162] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:45:01.769] INIT: version 2.96 booting [2025-09-23 21:45:01.881] INIT: Entering runlevel: 5 [2025-09-23 21:45:02.041] mtd28 attached [2025-09-23 21:45:02.041] mtd24 attached [2025-09-23 21:45:02.057] mtd32 attached [2025-09-23 21:45:02.105] RTNETLINK answers: File exists [2025-09-23 21:45:02.173] ubi0:animations is mounted. [2025-09-23 21:45:02.173] ubi1:textures is mounted. [2025-09-23 21:45:02.173] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:45:02.173] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:45:02.173] ubi2:dml_code is mounted. [2025-09-23 21:45:02.173] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:45:02.173] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:45:02.173] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:45:02.173] data.LB_FadeInType0=100 [2025-09-23 21:45:02.173] data.CHLH_FadeInType0=0 [2025-09-23 21:45:02.173] data.WU_FadeInDelay=0 [2025-09-23 21:45:02.173] max_time_out=0 [2025-09-23 21:45:02.173] No splash screen [2025-09-23 21:45:02.173] stop dss Done [2025-09-23 21:45:02.221] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:45:02.257] /dev/mem opened. [2025-09-23 21:45:02.257] Memory mapped at address 0xffffb8dff000. [2025-09-23 21:45:02.257] Read at address 0x00600018 (0xffffb8dff018): 0x00000000 [2025-09-23 21:45:02.257] Write at address 0x00600018 (0xffffb8dff018): 0x00400040, readback 0x00400040 [2025-09-23 21:45:02.257] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:45:02.497] Loaded PowerVR consumer services. [2025-09-23 21:45:02.513] Waiting data available... [2025-09-23 21:45:02.544] 512+0 records in [2025-09-23 21:45:02.561] 512+0 records out [2025-09-23 21:45:02.592] Starting syslogd/klogd: done [2025-09-23 21:45:02.608] DML Start [2025-09-23 21:45:02.769] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:45:02.944] DML res1: 0 [2025-09-23 21:45:03.502] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:45:03.502] Read Success [2025-09-23 21:45:03.502] Verifying certificate... [2025-09-23 21:45:03.742] Verified OK [2025-09-23 21:45:03.773] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:45:05.580] Verified OK [2025-09-23 21:45:05.580] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:45:06.043] Verified OK [2025-09-23 21:45:06.043] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:45:08.394] fs.protected_hardlinks = 1 [2025-09-23 21:45:08.425] fs.protected_symlinks = 1 [2025-09-23 21:45:08.425] kernel.modules_disabled = 1 [2025-09-23 21:45:08.616] [2025-09-23 21:45:08.616] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:45:10.020] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:45:17.766] SBL1:1210.0.1.0 [2025-09-23 21:45:17.798] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:45:19.381] SBL2:1210.0.1.0 [2025-09-23 21:45:19.413] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:45:19.525] j-A [2025-09-23 21:45:26.898] The R5 Autosar Classic is running [2025-09-23 21:45:26.898] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:45:26.898] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:45:27.505] INIT: version 2.96 booting [2025-09-23 21:45:27.616] INIT: Entering runlevel: 5 [2025-09-23 21:45:27.761] mtd24 attached [2025-09-23 21:45:27.777] mtd28 attached [2025-09-23 21:45:27.793] mtd32 attached [2025-09-23 21:45:27.825] ubi0:textures is mounted. [2025-09-23 21:45:27.841] RTNETLINK answers: File exists [2025-09-23 21:45:27.841] ubi1:animations is mounted. [2025-09-23 21:45:27.896] ubi2:dml_code is mounted. [2025-09-23 21:45:27.896] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:45:27.896] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:45:27.896] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:45:27.896] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:45:27.896] data.LB_FadeInType0=100 [2025-09-23 21:45:27.896] data.CHLH_FadeInType0=0 [2025-09-23 21:45:27.896] data.WU_FadeInDelay=0 [2025-09-23 21:45:27.896] max_time_out=0 [2025-09-23 21:45:27.896] No splash screen [2025-09-23 21:45:27.896] stop dss Done [2025-09-23 21:45:27.896] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:45:27.967] /dev/mem opened. [2025-09-23 21:45:27.967] Memory mapped at address 0xffff8730b000. [2025-09-23 21:45:27.967] Read at address 0x00600018 (0xffff8730b018): 0x00000000 [2025-09-23 21:45:27.967] Write at address 0x00600018 (0xffff8730b018): 0x00400040, readback 0x00400040 [2025-09-23 21:45:27.983] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:45:28.005] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:45:28.070] Loaded PowerVR consumer services. [2025-09-23 21:45:28.229] Waiting data available... [2025-09-23 21:45:28.245] 512+0 records in [2025-09-23 21:45:28.245] 512+0 records out [2025-09-23 21:45:28.293] Starting syslogd/klogd: done [2025-09-23 21:45:28.309] DML Start [2025-09-23 21:45:28.469] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:45:28.693] DML res1: 0 [2025-09-23 21:45:29.167] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:45:29.167] Read Success [2025-09-23 21:45:29.167] Verifying certificate... [2025-09-23 21:45:29.422] Verified OK [2025-09-23 21:45:29.438] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:45:31.028] Verified OK [2025-09-23 21:45:31.029] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:45:31.666] Verified OK [2025-09-23 21:45:31.666] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:45:34.304] fs.protected_hardlinks = 1 [2025-09-23 21:45:34.304] fs.protected_symlinks = 1 [2025-09-23 21:45:34.320] kernel.modules_disabled = 1 [2025-09-23 21:45:34.496] [2025-09-23 21:45:34.496] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:45:35.722] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:45:43.490] SBL1:1210.0.1.0 [2025-09-23 21:45:43.538] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:45:45.105] SBL2:1210.0.1.0 [2025-09-23 21:45:45.153] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:45:45.250] j-A [2025-09-23 21:45:52.605] The R5 Autosar Classic is running [2025-09-23 21:45:52.627] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:45:52.627] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:45:53.235] INIT: version 2.96 booting [2025-09-23 21:45:53.347] INIT: Entering runlevel: 5 [2025-09-23 21:45:53.506] mtd28 attached [2025-09-23 21:45:53.506] mtd24 attached [2025-09-23 21:45:53.538] mtd32 attached [2025-09-23 21:45:53.538] ubi0:animations is mounted. [2025-09-23 21:45:53.571] ubi1:textures is mounted. [2025-09-23 21:45:53.571] RTNETLINK answers: File exists [2025-09-23 21:45:53.631] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:45:53.631] ubi2:dml_code is mounted. [2025-09-23 21:45:53.631] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:45:53.631] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:45:53.631] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:45:53.631] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:45:53.631] data.LB_FadeInType0=100 [2025-09-23 21:45:53.631] data.CHLH_FadeInType0=0 [2025-09-23 21:45:53.631] data.WU_FadeInDelay=0 [2025-09-23 21:45:53.631] max_time_out=0 [2025-09-23 21:45:53.631] No splash screen [2025-09-23 21:45:53.631] stop dss Done [2025-09-23 21:45:53.662] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:45:53.662] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:45:53.696] /dev/mem opened. [2025-09-23 21:45:53.696] Memory mapped at address 0xffff81b94000. [2025-09-23 21:45:53.696] Read at address 0x00600018 (0xffff81b94018): 0x00000000 [2025-09-23 21:45:53.696] Write at address 0x00600018 (0xffff81b94018): 0x00400040, readback 0x00400040 [2025-09-23 21:45:53.856] Loaded PowerVR consumer services. [2025-09-23 21:45:53.984] Waiting data available... [2025-09-23 21:45:54.016] 512+0 records in [2025-09-23 21:45:54.016] 512+0 records out [2025-09-23 21:45:54.064] Starting syslogd/klogd: done [2025-09-23 21:45:54.080] DML Start [2025-09-23 21:45:54.271] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:45:54.496] DML res1: 0 [2025-09-23 21:45:54.862] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:45:54.862] Read Success [2025-09-23 21:45:54.862] Verifying certificate... [2025-09-23 21:45:55.134] Verified OK [2025-09-23 21:45:55.151] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:45:56.983] Verified OK [2025-09-23 21:45:56.983] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:45:57.488] Verified OK [2025-09-23 21:45:57.488] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:45:59.902] fs.protected_hardlinks = 1 [2025-09-23 21:45:59.918] fs.protected_symlinks = 1 [2025-09-23 21:45:59.918] kernel.modules_disabled = 1 [2025-09-23 21:46:00.126] [2025-09-23 21:46:00.126] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:46:01.532] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:46:09.246] SBL1:1210.0.1.0 [2025-09-23 21:46:09.278] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:46:10.860] SBL2:1210.0.1.0 [2025-09-23 21:46:10.892] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:46:11.004] j-A [2025-09-23 21:46:18.379] The R5 Autosar Classic is running [2025-09-23 21:46:18.379] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:46:18.379] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:46:18.986] INIT: version 2.96 booting [2025-09-23 21:46:19.099] INIT: Entering runlevel: 5 [2025-09-23 21:46:19.242] mtd24 attached [2025-09-23 21:46:19.259] mtd28 attached [2025-09-23 21:46:19.291] mtd32 attached [2025-09-23 21:46:19.307] ubi0:textures is mounted. [2025-09-23 21:46:19.322] RTNETLINK answers: File exists [2025-09-23 21:46:19.322] ubi1:animations is mounted. [2025-09-23 21:46:19.387] ubi2:dml_code is mounted. [2025-09-23 21:46:19.387] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:46:19.387] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:46:19.387] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:46:19.387] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:46:19.387] data.LB_FadeInType0=100 [2025-09-23 21:46:19.387] data.CHLH_FadeInType0=0 [2025-09-23 21:46:19.387] data.WU_FadeInDelay=0 [2025-09-23 21:46:19.387] max_time_out=0 [2025-09-23 21:46:19.387] No splash screen [2025-09-23 21:46:19.387] stop dss Done [2025-09-23 21:46:19.387] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:46:19.467] /dev/mem opened. [2025-09-23 21:46:19.467] Memory mapped at address 0xffff8697f000. [2025-09-23 21:46:19.467] Read at address 0x00600018 (0xffff8697f018): 0x00000000 [2025-09-23 21:46:19.467] Write at address 0x00600018 (0xffff8697f018): 0x00400040, readback 0x00400040 [2025-09-23 21:46:19.467] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:46:19.467] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:46:19.546] Loaded PowerVR consumer services. [2025-09-23 21:46:19.722] Waiting data available... [2025-09-23 21:46:19.754] 512+0 records in [2025-09-23 21:46:19.754] 512+0 records out [2025-09-23 21:46:19.786] Starting syslogd/klogd: done [2025-09-23 21:46:19.802] DML Start [2025-09-23 21:46:19.994] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:46:20.218] DML res1: 0 [2025-09-23 21:46:20.671] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:46:20.671] Read Success [2025-09-23 21:46:20.671] Verifying certificate... [2025-09-23 21:46:20.927] Verified OK [2025-09-23 21:46:20.943] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:46:22.650] Verified OK [2025-09-23 21:46:22.650] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:46:23.234] Verified OK [2025-09-23 21:46:23.234] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:46:25.807] fs.protected_hardlinks = 1 [2025-09-23 21:46:25.823] fs.protected_symlinks = 1 [2025-09-23 21:46:25.823] kernel.modules_disabled = 1 [2025-09-23 21:46:26.015] [2025-09-23 21:46:26.015] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:46:27.235] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:46:34.987] SBL1:1210.0.1.0 [2025-09-23 21:46:35.019] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:46:36.601] SBL2:1210.0.1.0 [2025-09-23 21:46:36.649] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:46:36.746] j-A [2025-09-23 21:46:44.101] The R5 Autosar Classic is running [2025-09-23 21:46:44.123] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:46:44.123] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:46:44.730] INIT: version 2.96 booting [2025-09-23 21:46:44.843] INIT: Entering runlevel: 5 [2025-09-23 21:46:45.003] mtd32 attached [2025-09-23 21:46:45.003] mtd24 attached [2025-09-23 21:46:45.019] mtd28 attached [2025-09-23 21:46:45.067] RTNETLINK answers: File exists [2025-09-23 21:46:45.110] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:46:45.110] ubi1:textures is mounted. [2025-09-23 21:46:45.110] ubi0:dml_code is mounted. [2025-09-23 21:46:45.110] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:46:45.110] ubi2:animations is mounted. [2025-09-23 21:46:45.110] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:46:45.110] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:46:45.110] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:46:45.110] data.LB_FadeInType0=100 [2025-09-23 21:46:45.130] data.CHLH_FadeInType0=0 [2025-09-23 21:46:45.130] data.WU_FadeInDelay=0 [2025-09-23 21:46:45.130] max_time_out=0 [2025-09-23 21:46:45.130] No splash screen [2025-09-23 21:46:45.130] stop dss Done [2025-09-23 21:46:45.146] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:46:45.163] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:46:45.178] /dev/mem opened. [2025-09-23 21:46:45.178] Memory mapped at address 0xffff9dfca000. [2025-09-23 21:46:45.204] Read at address 0x00600018 (0xffff9dfca018): 0x00000000 [2025-09-23 21:46:45.204] Write at address 0x00600018 (0xffff9dfca018): 0x00400040, readback 0x00400040 [2025-09-23 21:46:45.285] Loaded PowerVR consumer services. [2025-09-23 21:46:45.476] Waiting data available... [2025-09-23 21:46:45.508] 512+0 records in [2025-09-23 21:46:45.508] 512+0 records out [2025-09-23 21:46:45.524] Starting syslogd/klogd: done [2025-09-23 21:46:45.540] DML Start [2025-09-23 21:46:45.733] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:46:45.956] DML res1: 0 [2025-09-23 21:46:46.418] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:46:46.418] Read Success [2025-09-23 21:46:46.418] Verifying certificate... [2025-09-23 21:46:46.658] Verified OK [2025-09-23 21:46:46.674] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:46:48.433] Verified OK [2025-09-23 21:46:48.433] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:46:48.966] Verified OK [2025-09-23 21:46:48.966] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:46:51.476] fs.protected_hardlinks = 1 [2025-09-23 21:46:51.476] fs.protected_symlinks = 1 [2025-09-23 21:46:51.491] kernel.modules_disabled = 1 [2025-09-23 21:46:51.684] [2025-09-23 21:46:51.684] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:46:52.955] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:47:00.723] SBL1:1210.0.1.0 [2025-09-23 21:47:00.770] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:47:02.337] SBL2:1210.0.1.0 [2025-09-23 21:47:02.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:47:02.497] j-A [2025-09-23 21:47:09.836] The R5 Autosar Classic is running [2025-09-23 21:47:09.867] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:47:09.867] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:47:10.475] INIT: version 2.96 booting [2025-09-23 21:47:10.586] INIT: Entering runlevel: 5 [2025-09-23 21:47:10.746] mtd24 attached [2025-09-23 21:47:10.746] mtd28 attached [2025-09-23 21:47:10.762] mtd32 attached [2025-09-23 21:47:10.847] ubi0:textures is mounted. [2025-09-23 21:47:10.847] RTNETLINK answers: File exists [2025-09-23 21:47:10.847] ubi1:animations is mounted. [2025-09-23 21:47:10.847] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:47:10.847] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:47:10.847] ubi2:dml_code is mounted. [2025-09-23 21:47:10.847] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:47:10.847] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:47:10.847] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:47:10.868] data.LB_FadeInType0=100 [2025-09-23 21:47:10.868] data.CHLH_FadeInType0=0 [2025-09-23 21:47:10.868] data.WU_FadeInDelay=0 [2025-09-23 21:47:10.868] max_time_out=0 [2025-09-23 21:47:10.868] No splash screen [2025-09-23 21:47:10.868] stop dss Done [2025-09-23 21:47:10.932] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:47:10.964] /dev/mem opened. [2025-09-23 21:47:10.964] Memory mapped at address 0xffff833b7000. [2025-09-23 21:47:10.964] Read at address 0x00600018 (0xffff833b7018): 0x00000000 [2025-09-23 21:47:10.964] Write at address 0x00600018 (0xffff833b7018): 0x00400040, readback 0x00400040 [2025-09-23 21:47:10.964] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:47:11.204] Loaded PowerVR consumer services. [2025-09-23 21:47:11.220] Waiting data available... [2025-09-23 21:47:11.236] 512+0 records in [2025-09-23 21:47:11.236] 512+0 records out [2025-09-23 21:47:11.268] Starting syslogd/klogd: done [2025-09-23 21:47:11.284] DML Start [2025-09-23 21:47:11.492] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:47:11.748] DML res1: 0 [2025-09-23 21:47:12.084] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:47:12.104] Read Success [2025-09-23 21:47:12.104] Verifying certificate... [2025-09-23 21:47:12.360] Verified OK [2025-09-23 21:47:12.376] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:47:14.088] Verified OK [2025-09-23 21:47:14.088] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:47:14.688] Verified OK [2025-09-23 21:47:14.688] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:47:17.214] fs.protected_hardlinks = 1 [2025-09-23 21:47:17.230] fs.protected_symlinks = 1 [2025-09-23 21:47:17.230] kernel.modules_disabled = 1 [2025-09-23 21:47:17.454] [2025-09-23 21:47:17.454] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:47:18.771] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:47:26.457] SBL1:1210.0.1.0 [2025-09-23 21:47:26.505] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:47:28.071] SBL2:1210.0.1.0 [2025-09-23 21:47:28.120] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:47:28.231] j-A [2025-09-23 21:47:35.569] The R5 Autosar Classic is running [2025-09-23 21:47:35.600] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:47:35.600] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:47:36.208] INIT: version 2.96 booting [2025-09-23 21:47:36.321] INIT: Entering runlevel: 5 [2025-09-23 21:47:36.464] mtd24 attached [2025-09-23 21:47:36.480] mtd32 attached [2025-09-23 21:47:36.496] mtd28 attached [2025-09-23 21:47:36.528] ubi0:textures is mounted. [2025-09-23 21:47:36.544] RTNETLINK answers: File exists [2025-09-23 21:47:36.544] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:47:36.581] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:47:36.581] ubi2:animations is mounted. [2025-09-23 21:47:36.581] ubi1:dml_code is mounted. [2025-09-23 21:47:36.581] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:47:36.581] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:47:36.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:47:36.609] data.LB_FadeInType0=100 [2025-09-23 21:47:36.609] data.CHLH_FadeInType0=0 [2025-09-23 21:47:36.609] data.WU_FadeInDelay=0 [2025-09-23 21:47:36.609] max_time_out=0 [2025-09-23 21:47:36.609] No splash screen [2025-09-23 21:47:36.609] stop dss Done [2025-09-23 21:47:36.692] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:47:36.692] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:47:36.692] /dev/mem opened. [2025-09-23 21:47:36.692] Memory mapped at address 0xffff844ee000. [2025-09-23 21:47:36.692] Read at address 0x00600018 (0xffff844ee018): 0x00000000 [2025-09-23 21:47:36.692] Write at address 0x00600018 (0xffff844ee018): 0x00400040, readback 0x00400040 [2025-09-23 21:47:36.868] Loaded PowerVR consumer services. [2025-09-23 21:47:36.964] Waiting data available... [2025-09-23 21:47:36.980] 512+0 records in [2025-09-23 21:47:36.980] 512+0 records out [2025-09-23 21:47:37.012] Starting syslogd/klogd: done [2025-09-23 21:47:37.028] DML Start [2025-09-23 21:47:37.172] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:47:37.412] DML res1: 0 [2025-09-23 21:47:37.903] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:47:37.903] Read Success [2025-09-23 21:47:37.903] Verifying certificate... [2025-09-23 21:47:38.176] Verified OK [2025-09-23 21:47:38.207] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:47:39.960] Verified OK [2025-09-23 21:47:39.960] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:47:40.472] Verified OK [2025-09-23 21:47:40.493] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:47:42.940] fs.protected_hardlinks = 1 [2025-09-23 21:47:42.967] fs.protected_symlinks = 1 [2025-09-23 21:47:42.967] kernel.modules_disabled = 1 [2025-09-23 21:47:43.160] [2025-09-23 21:47:43.160] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:47:44.451] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:47:52.217] SBL1:1210.0.1.0 [2025-09-23 21:47:52.249] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:47:53.832] SBL2:1210.0.1.0 [2025-09-23 21:47:53.880] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:47:53.975] j-A [2025-09-23 21:48:01.328] The R5 Autosar Classic is running [2025-09-23 21:48:01.352] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:48:01.352] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:48:01.961] INIT: version 2.96 booting [2025-09-23 21:48:02.072] INIT: Entering runlevel: 5 [2025-09-23 21:48:02.216] mtd24 attached [2025-09-23 21:48:02.232] mtd32 attached [2025-09-23 21:48:02.248] mtd28 attached [2025-09-23 21:48:02.296] ubi0:textures is mounted. [2025-09-23 21:48:02.296] RTNETLINK answers: File exists [2025-09-23 21:48:02.331] ubi2:animations is mounted. [2025-09-23 21:48:02.331] ubi1:dml_code is mounted. [2025-09-23 21:48:02.331] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:48:02.331] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:48:02.331] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:48:02.370] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:48:02.370] data.LB_FadeInType0=100 [2025-09-23 21:48:02.370] data.CHLH_FadeInType0=0 [2025-09-23 21:48:02.370] data.WU_FadeInDelay=0 [2025-09-23 21:48:02.370] max_time_out=0 [2025-09-23 21:48:02.370] No splash screen [2025-09-23 21:48:02.370] stop dss Done [2025-09-23 21:48:02.370] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:48:02.402] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:48:02.442] /dev/mem opened. [2025-09-23 21:48:02.442] Memory mapped at address 0xffff9ae82000. [2025-09-23 21:48:02.442] Read at address 0x00600018 (0xffff9ae82018): 0x00000000 [2025-09-23 21:48:02.442] Write at address 0x00600018 (0xffff9ae82018): 0x00400040, readback 0x00400040 [2025-09-23 21:48:02.442] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:48:02.618] Loaded PowerVR consumer services. [2025-09-23 21:48:02.729] Waiting data available... [2025-09-23 21:48:02.761] 512+0 records in [2025-09-23 21:48:02.761] 512+0 records out [2025-09-23 21:48:02.778] Starting syslogd/klogd: done [2025-09-23 21:48:02.794] DML Start [2025-09-23 21:48:02.970] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:48:03.210] DML res1: 0 [2025-09-23 21:48:03.681] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:48:03.681] Read Success [2025-09-23 21:48:03.681] Verifying certificate... [2025-09-23 21:48:03.905] Verified OK [2025-09-23 21:48:03.921] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:48:05.616] Verified OK [2025-09-23 21:48:05.616] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:48:06.254] Verified OK [2025-09-23 21:48:06.254] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:48:08.874] fs.protected_hardlinks = 1 [2025-09-23 21:48:08.874] fs.protected_symlinks = 1 [2025-09-23 21:48:08.874] kernel.modules_disabled = 1 [2025-09-23 21:48:09.066] [2025-09-23 21:48:09.066] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:48:10.209] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:48:17.979] SBL1:1210.0.1.0 [2025-09-23 21:48:18.011] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:48:19.593] SBL2:1210.0.1.0 [2025-09-23 21:48:19.625] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:48:19.738] j-A [2025-09-23 21:48:27.112] The R5 Autosar Classic is running [2025-09-23 21:48:27.112] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:48:27.112] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:48:27.721] INIT: version 2.96 booting [2025-09-23 21:48:27.832] INIT: Entering runlevel: 5 [2025-09-23 21:48:27.992] mtd24 attached [2025-09-23 21:48:27.992] mtd28 attached [2025-09-23 21:48:28.008] mtd32 attached [2025-09-23 21:48:28.057] ubi0:textures is mounted. [2025-09-23 21:48:28.057] RTNETLINK answers: File exists [2025-09-23 21:48:28.115] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:48:28.115] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:48:28.115] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:48:28.115] ubi1:animations is mounted. [2025-09-23 21:48:28.115] ubi2:dml_code is mounted. [2025-09-23 21:48:28.115] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:48:28.115] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:48:28.115] data.LB_FadeInType0=100 [2025-09-23 21:48:28.115] data.CHLH_FadeInType0=0 [2025-09-23 21:48:28.115] data.WU_FadeInDelay=0 [2025-09-23 21:48:28.115] max_time_out=0 [2025-09-23 21:48:28.115] No splash screen [2025-09-23 21:48:28.115] stop dss Done [2025-09-23 21:48:28.146] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:48:28.183] /dev/mem opened. [2025-09-23 21:48:28.183] Memory mapped at address 0xffff99c7e000. [2025-09-23 21:48:28.183] Read at address 0x00600018 (0xffff99c7e018): 0x00000000 [2025-09-23 21:48:28.183] Write at address 0x00600018 (0xffff99c7e018): 0x00400040, readback 0x00400040 [2025-09-23 21:48:28.183] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:48:28.263] Loaded PowerVR consumer services. [2025-09-23 21:48:28.455] Waiting data available... [2025-09-23 21:48:28.503] 512+0 records in [2025-09-23 21:48:28.503] 512+0 records out [2025-09-23 21:48:28.551] Starting syslogd/klogd: done [2025-09-23 21:48:28.567] DML Start [2025-09-23 21:48:28.726] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:48:28.919] DML res1: 0 [2025-09-23 21:48:29.442] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:48:29.442] Read Success [2025-09-23 21:48:29.442] Verifying certificate... [2025-09-23 21:48:29.698] Verified OK [2025-09-23 21:48:29.714] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:48:31.406] Verified OK [2025-09-23 21:48:31.406] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:48:31.961] Verified OK [2025-09-23 21:48:31.961] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:48:34.456] fs.protected_hardlinks = 1 [2025-09-23 21:48:34.472] fs.protected_symlinks = 1 [2025-09-23 21:48:34.488] kernel.modules_disabled = 1 [2025-09-23 21:48:34.679] [2025-09-23 21:48:34.679] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:48:35.975] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:48:43.702] SBL1:1210.0.1.0 [2025-09-23 21:48:43.750] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:48:45.317] SBL2:1210.0.1.0 [2025-09-23 21:48:45.365] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:48:45.477] j-A [2025-09-23 21:48:52.849] The R5 Autosar Classic is running [2025-09-23 21:48:52.849] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:48:52.849] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:48:53.456] INIT: version 2.96 booting [2025-09-23 21:48:53.569] INIT: Entering runlevel: 5 [2025-09-23 21:48:53.728] mtd28 attached [2025-09-23 21:48:53.728] mtd24 attached [2025-09-23 21:48:53.744] mtd32 attached [2025-09-23 21:48:53.776] ubi0:animations is mounted. [2025-09-23 21:48:53.792] ubi1:textures is mounted. [2025-09-23 21:48:53.792] RTNETLINK answers: File exists [2025-09-23 21:48:53.853] ubi2:dml_code is mounted. [2025-09-23 21:48:53.853] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:48:53.853] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:48:53.853] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:48:53.853] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:48:53.853] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:48:53.853] data.LB_FadeInType0=100 [2025-09-23 21:48:53.853] data.CHLH_FadeInType0=0 [2025-09-23 21:48:53.853] data.WU_FadeInDelay=0 [2025-09-23 21:48:53.853] max_time_out=0 [2025-09-23 21:48:53.853] No splash screen [2025-09-23 21:48:53.853] stop dss Done [2025-09-23 21:48:53.886] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:48:53.934] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:48:53.934] /dev/mem opened. [2025-09-23 21:48:53.934] Memory mapped at address 0xffff91aab000. [2025-09-23 21:48:53.934] Read at address 0x00600018 (0xffff91aab018): 0x00000000 [2025-09-23 21:48:53.934] Write at address 0x00600018 (0xffff91aab018): 0x00400040, readback 0x00400040 [2025-09-23 21:48:54.029] Loaded PowerVR consumer services. [2025-09-23 21:48:54.205] Waiting data available... [2025-09-23 21:48:54.237] 512+0 records in [2025-09-23 21:48:54.237] 512+0 records out [2025-09-23 21:48:54.285] Starting syslogd/klogd: done [2025-09-23 21:48:54.301] DML Start [2025-09-23 21:48:54.509] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:48:54.717] DML res1: 0 [2025-09-23 21:48:55.144] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:48:55.144] Read Success [2025-09-23 21:48:55.144] Verifying certificate... [2025-09-23 21:48:55.368] Verified OK [2025-09-23 21:48:55.384] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:48:57.077] Verified OK [2025-09-23 21:48:57.077] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:48:57.713] Verified OK [2025-09-23 21:48:57.713] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:49:00.303] fs.protected_hardlinks = 1 [2025-09-23 21:49:00.303] fs.protected_symlinks = 1 [2025-09-23 21:49:00.319] kernel.modules_disabled = 1 [2025-09-23 21:49:00.496] [2025-09-23 21:49:00.496] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:49:01.758] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:49:09.450] SBL1:1210.0.1.0 [2025-09-23 21:49:09.498] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:49:11.064] SBL2:1210.0.1.0 [2025-09-23 21:49:11.112] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:49:11.224] j-A [2025-09-23 21:49:18.594] The R5 Autosar Classic is running [2025-09-23 21:49:18.594] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:49:18.594] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:49:19.201] INIT: version 2.96 booting [2025-09-23 21:49:19.313] INIT: Entering runlevel: 5 [2025-09-23 21:49:19.473] mtd32 attached [2025-09-23 21:49:19.473] mtd24 attached [2025-09-23 21:49:19.489] mtd28 attached [2025-09-23 21:49:19.537] RTNETLINK answers: File exists [2025-09-23 21:49:19.574] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:49:19.574] ubi0:dml_code is mounted. [2025-09-23 21:49:19.574] ubi1:textures is mounted. [2025-09-23 21:49:19.574] ubi2:animations is mounted. [2025-09-23 21:49:19.574] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:49:19.574] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:49:19.574] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:49:19.602] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:49:19.602] data.LB_FadeInType0=100 [2025-09-23 21:49:19.602] data.CHLH_FadeInType0=0 [2025-09-23 21:49:19.602] data.WU_FadeInDelay=0 [2025-09-23 21:49:19.602] max_time_out=0 [2025-09-23 21:49:19.602] No splash screen [2025-09-23 21:49:19.602] stop dss Done [2025-09-23 21:49:19.647] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:49:19.647] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:49:19.685] /dev/mem opened. [2025-09-23 21:49:19.685] Memory mapped at address 0xffff88fbd000. [2025-09-23 21:49:19.685] Read at address 0x00600018 (0xffff88fbd018): 0x00000000 [2025-09-23 21:49:19.685] Write at address 0x00600018 (0xffff88fbd018): 0x00400040, readback 0x00400040 [2025-09-23 21:49:19.925] Loaded PowerVR consumer services. [2025-09-23 21:49:19.941] Waiting data available... [2025-09-23 21:49:19.973] 512+0 records in [2025-09-23 21:49:19.973] 512+0 records out [2025-09-23 21:49:20.021] Starting syslogd/klogd: done [2025-09-23 21:49:20.037] DML Start [2025-09-23 21:49:20.245] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:49:20.404] DML res1: 0 [2025-09-23 21:49:20.835] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:49:20.851] Read Success [2025-09-23 21:49:20.851] Verifying certificate... [2025-09-23 21:49:21.076] Verified OK [2025-09-23 21:49:21.092] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:49:22.778] Verified OK [2025-09-23 21:49:22.778] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:49:23.429] Verified OK [2025-09-23 21:49:23.429] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:49:26.051] fs.protected_hardlinks = 1 [2025-09-23 21:49:26.067] fs.protected_symlinks = 1 [2025-09-23 21:49:26.083] kernel.modules_disabled = 1 [2025-09-23 21:49:26.275] [2025-09-23 21:49:26.275] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:49:27.440] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:49:35.186] SBL1:1210.0.1.0 [2025-09-23 21:49:35.234] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:49:36.801] SBL2:1210.0.1.0 [2025-09-23 21:49:36.849] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:49:36.961] j-A [2025-09-23 21:49:44.334] The R5 Autosar Classic is running [2025-09-23 21:49:44.334] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:49:44.334] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:49:44.941] INIT: version 2.96 booting [2025-09-23 21:49:45.037] INIT: Entering runlevel: 5 [2025-09-23 21:49:45.197] mtd32 attached [2025-09-23 21:49:45.212] mtd24 attached [2025-09-23 21:49:45.229] mtd28 attached [2025-09-23 21:49:45.330] RTNETLINK answers: File exists [2025-09-23 21:49:45.330] ubi0:dml_code is mounted. [2025-09-23 21:49:45.330] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:49:45.330] ubi1:textures is mounted. [2025-09-23 21:49:45.330] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:49:45.330] ubi2:animations is mounted. [2025-09-23 21:49:45.330] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:49:45.330] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:49:45.330] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:49:45.330] data.LB_FadeInType0=100 [2025-09-23 21:49:45.330] data.CHLH_FadeInType0=0 [2025-09-23 21:49:45.330] data.WU_FadeInDelay=0 [2025-09-23 21:49:45.330] max_time_out=0 [2025-09-23 21:49:45.330] No splash screen [2025-09-23 21:49:45.330] stop dss Done [2025-09-23 21:49:45.409] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:49:45.409] /dev/mem opened. [2025-09-23 21:49:45.409] Memory mapped at address 0xffffa5a32000. [2025-09-23 21:49:45.409] Read at address 0x00600018 (0xffffa5a32018): 0x00000000 [2025-09-23 21:49:45.409] Write at address 0x00600018 (0xffffa5a32018): 0x00400040, readback 0x00400040 [2025-09-23 21:49:45.409] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:49:45.552] Loaded PowerVR consumer services. [2025-09-23 21:49:45.681] Waiting data available... [2025-09-23 21:49:45.713] 512+0 records in [2025-09-23 21:49:45.713] 512+0 records out [2025-09-23 21:49:45.744] Starting syslogd/klogd: done [2025-09-23 21:49:45.760] DML Start [2025-09-23 21:49:45.921] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:49:46.160] DML res1: 0 [2025-09-23 21:49:46.596] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:49:46.596] Read Success [2025-09-23 21:49:46.596] Verifying certificate... [2025-09-23 21:49:46.852] Verified OK [2025-09-23 21:49:46.868] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:49:48.687] Verified OK [2025-09-23 21:49:48.687] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:49:49.158] Verified OK [2025-09-23 21:49:49.158] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:49:51.540] fs.protected_hardlinks = 1 [2025-09-23 21:49:51.540] fs.protected_symlinks = 1 [2025-09-23 21:49:51.556] kernel.modules_disabled = 1 [2025-09-23 21:49:51.764] [2025-09-23 21:49:51.764] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:49:53.176] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:50:00.957] SBL1:1210.0.1.0 [2025-09-23 21:50:00.989] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:50:02.572] SBL2:1210.0.1.0 [2025-09-23 21:50:02.620] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:50:02.716] j-A [2025-09-23 21:50:10.071] The R5 Autosar Classic is running [2025-09-23 21:50:10.071] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:50:10.092] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:50:10.700] INIT: version 2.96 booting [2025-09-23 21:50:10.812] INIT: Entering runlevel: 5 [2025-09-23 21:50:10.972] mtd24 attached [2025-09-23 21:50:10.972] mtd28 attached [2025-09-23 21:50:11.004] mtd32 attached [2025-09-23 21:50:11.004] ubi0:textures is mounted. [2025-09-23 21:50:11.020] ubi1:animations is mounted. [2025-09-23 21:50:11.035] RTNETLINK answers: File exists [2025-09-23 21:50:11.094] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:50:11.094] ubi2:dml_code is mounted. [2025-09-23 21:50:11.094] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:50:11.094] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:50:11.094] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:50:11.094] data.LB_FadeInType0=100 [2025-09-23 21:50:11.094] data.CHLH_FadeInType0=0 [2025-09-23 21:50:11.094] data.WU_FadeInDelay=0 [2025-09-23 21:50:11.094] max_time_out=0 [2025-09-23 21:50:11.094] No splash screen [2025-09-23 21:50:11.094] stop dss Done [2025-09-23 21:50:11.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:50:11.126] /dev/mem opened. [2025-09-23 21:50:11.126] Memory mapped at address 0xffffb6b74000. [2025-09-23 21:50:11.152] Read at address 0x00600018 (0xffffb6b74018): 0x00000000 [2025-09-23 21:50:11.152] Write at address 0x00600018 (0xffffb6b74018): 0x00400040, readback 0x00400040 [2025-09-23 21:50:11.201] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:50:11.217] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:50:11.441] Waiting data available... [2025-09-23 21:50:11.456] Loaded PowerVR consumer services. [2025-09-23 21:50:11.489] 512+0 records in [2025-09-23 21:50:11.489] 512+0 records out [2025-09-23 21:50:11.520] Starting syslogd/klogd: done [2025-09-23 21:50:11.537] DML Start [2025-09-23 21:50:11.728] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:50:11.984] DML res1: 0 [2025-09-23 21:50:12.393] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:50:12.393] Read Success [2025-09-23 21:50:12.393] Verifying certificate... [2025-09-23 21:50:12.632] Verified OK [2025-09-23 21:50:12.664] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:50:14.246] Verified OK [2025-09-23 21:50:14.262] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:50:14.902] Verified OK [2025-09-23 21:50:14.902] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:50:17.571] fs.protected_hardlinks = 1 [2025-09-23 21:50:17.571] fs.protected_symlinks = 1 [2025-09-23 21:50:17.587] kernel.modules_disabled = 1 [2025-09-23 21:50:17.780] [2025-09-23 21:50:17.780] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:50:18.974] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:50:26.694] SBL1:1210.0.1.0 [2025-09-23 21:50:26.742] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:50:28.310] SBL2:1210.0.1.0 [2025-09-23 21:50:28.358] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:50:28.453] j-A [2025-09-23 21:50:35.809] The R5 Autosar Classic is running [2025-09-23 21:50:35.833] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:50:35.833] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:50:36.441] INIT: version 2.96 booting [2025-09-23 21:50:36.553] INIT: Entering runlevel: 5 [2025-09-23 21:50:36.712] mtd32 attached [2025-09-23 21:50:36.712] mtd24 attached [2025-09-23 21:50:36.728] mtd28 attached [2025-09-23 21:50:36.777] RTNETLINK answers: File exists [2025-09-23 21:50:36.818] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:50:36.818] ubi1:textures is mounted. [2025-09-23 21:50:36.818] ubi0:dml_code is mounted. [2025-09-23 21:50:36.818] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:50:36.818] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:50:36.818] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:50:36.818] ubi2:animations is mounted. [2025-09-23 21:50:36.818] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:50:36.846] data.LB_FadeInType0=100 [2025-09-23 21:50:36.846] data.CHLH_FadeInType0=0 [2025-09-23 21:50:36.846] data.WU_FadeInDelay=0 [2025-09-23 21:50:36.846] max_time_out=0 [2025-09-23 21:50:36.846] No splash screen [2025-09-23 21:50:36.846] stop dss Done [2025-09-23 21:50:36.862] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:50:36.862] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:50:36.916] /dev/mem opened. [2025-09-23 21:50:36.916] Memory mapped at address 0xffffae188000. [2025-09-23 21:50:36.916] Read at address 0x00600018 (0xffffae188018): 0x00000000 [2025-09-23 21:50:36.916] Write at address 0x00600018 (0xffffae188018): 0x00400040, readback 0x00400040 [2025-09-23 21:50:37.011] Loaded PowerVR consumer services. [2025-09-23 21:50:37.188] Waiting data available... [2025-09-23 21:50:37.235] 512+0 records in [2025-09-23 21:50:37.235] 512+0 records out [2025-09-23 21:50:37.268] Starting syslogd/klogd: done [2025-09-23 21:50:37.284] DML Start [2025-09-23 21:50:37.428] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:50:37.620] DML res1: 0 [2025-09-23 21:50:38.125] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:50:38.125] Read Success [2025-09-23 21:50:38.125] Verifying certificate... [2025-09-23 21:50:38.349] Verified OK [2025-09-23 21:50:38.365] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:50:40.060] Verified OK [2025-09-23 21:50:40.060] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:50:40.696] Verified OK [2025-09-23 21:50:40.696] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:50:41.368] 5445 GC [0] [2025-09-23 21:50:41.431] 5517 GC [1] [2025-09-23 21:50:41.512] 5585 GC [2] [2025-09-23 21:50:41.575] 5656 GC [3] [2025-09-23 21:50:41.639] 5729 GC [4] [2025-09-23 21:50:41.720] 5796 GC [5] [2025-09-23 21:50:41.784] 5867 GC [6] [2025-09-23 21:50:41.863] 5935 GC [7] [2025-09-23 21:50:41.927] 6007 GC [8] [2025-09-23 21:50:41.991] 6069 GC [9] [2025-09-23 21:50:42.055] 6146 GC [10] [2025-09-23 21:50:42.119] 6204 GC [11] [2025-09-23 21:50:42.199] 6277 GC [12] [2025-09-23 21:50:42.247] 6338 GC [13] [2025-09-23 21:50:42.311] 6396 GC [14] [2025-09-23 21:50:42.358] 6447 GC [15] [2025-09-23 21:50:42.423] 6505 GC [16] [2025-09-23 21:50:42.487] 6577 GC [17] [2025-09-23 21:50:42.550] 6628 GC [18] [2025-09-23 21:50:42.598] 6686 GC [19] [2025-09-23 21:50:42.662] 6747 GC [20] [2025-09-23 21:50:42.727] 6805 GC [21] [2025-09-23 21:50:42.775] 6866 GC [22] [2025-09-23 21:50:42.838] 6924 GC [23] [2025-09-23 21:50:42.886] 6976 GC [24] [2025-09-23 21:50:42.966] 7047 GC [25] [2025-09-23 21:50:43.014] 7095 GC [26] [2025-09-23 21:50:43.078] 7166 GC [27] [2025-09-23 21:50:43.159] 7239 GC [28] [2025-09-23 21:50:43.159] 7249 GC [29] [2025-09-23 21:50:43.206] fs.protected_hardlinks = 1 [2025-09-23 21:50:43.206] fs.protected_symlinks = 1 [2025-09-23 21:50:43.222] kernel.modules_disabled = 1 [2025-09-23 21:50:43.222] GC DONE [2025-09-23 21:50:43.414] [2025-09-23 21:50:43.414] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:50:44.627] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:50:52.433] SBL1:1210.0.1.0 [2025-09-23 21:50:52.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:50:54.047] SBL2:1210.0.1.0 [2025-09-23 21:50:54.079] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:50:54.175] j-A [2025-09-23 21:51:01.531] The R5 Autosar Classic is running [2025-09-23 21:51:01.555] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:51:01.555] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:51:02.163] INIT: version 2.96 booting [2025-09-23 21:51:02.274] INIT: Entering runlevel: 5 [2025-09-23 21:51:02.434] mtd32 attached [2025-09-23 21:51:02.450] mtd24 attached [2025-09-23 21:51:02.450] mtd28 attached [2025-09-23 21:51:02.482] ubi0:dml_code is mounted. [2025-09-23 21:51:02.498] ubi1:textures is mounted. [2025-09-23 21:51:02.559] RTNETLINK answers: File exists [2025-09-23 21:51:02.559] ubi2:animations is mounted. [2025-09-23 21:51:02.559] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:51:02.559] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:51:02.559] data.LB_FadeInType0=100 [2025-09-23 21:51:02.559] data.CHLH_FadeInType0=0 [2025-09-23 21:51:02.559] data.WU_FadeInDelay=0 [2025-09-23 21:51:02.559] max_time_out=0 [2025-09-23 21:51:02.559] No splash screen [2025-09-23 21:51:02.559] stop dss Done [2025-09-23 21:51:02.559] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:51:02.559] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:51:02.575] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:51:02.625] /dev/mem opened. [2025-09-23 21:51:02.625] Memory mapped at address 0xffff8c422000. [2025-09-23 21:51:02.625] Read at address 0x00600018 (0xffff8c422018): 0x00000000 [2025-09-23 21:51:02.625] Write at address 0x00600018 (0xffff8c422018): 0x00400040, readback 0x00400040 [2025-09-23 21:51:02.720] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:51:02.737] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:51:02.833] Loaded PowerVR consumer services. [2025-09-23 21:51:02.849] 512+0 records in [2025-09-23 21:51:02.865] 512+0 records out [2025-09-23 21:51:02.897] Starting syslogd/klogd: Waiting data available... [2025-09-23 21:51:02.929] done [2025-09-23 21:51:02.929] DML Start [2025-09-23 21:51:03.105] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:51:03.345] DML res1: 0 [2025-09-23 21:51:03.785] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:51:03.785] Read Success [2025-09-23 21:51:03.785] Verifying certificate... [2025-09-23 21:51:04.008] Verified OK [2025-09-23 21:51:04.024] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:51:05.485] Verified OK [2025-09-23 21:51:05.485] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:51:06.051] Verified OK [2025-09-23 21:51:06.051] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:51:08.930] fs.protected_hardlinks = 1 [2025-09-23 21:51:08.960] fs.protected_symlinks = 1 [2025-09-23 21:51:08.960] kernel.modules_disabled = 1 [2025-09-23 21:51:09.152] [2025-09-23 21:51:09.152] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:51:10.423] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:51:18.167] SBL1:1210.0.1.0 [2025-09-23 21:51:18.198] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:51:19.782] SBL2:1210.0.1.0 [2025-09-23 21:51:19.814] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:51:19.910] j-A [2025-09-23 21:51:27.264] The R5 Autosar Classic is running [2025-09-23 21:51:27.290] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:51:27.290] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:51:27.897] INIT: version 2.96 booting [2025-09-23 21:51:28.009] INIT: Entering runlevel: 5 [2025-09-23 21:51:28.153] mtd24 attached [2025-09-23 21:51:28.169] mtd28 attached [2025-09-23 21:51:28.201] mtd32 attached [2025-09-23 21:51:28.233] ubi1:animations is mounted. [2025-09-23 21:51:28.233] ubi0:textures is mounted. [2025-09-23 21:51:28.293] RTNETLINK answers: File exists [2025-09-23 21:51:28.293] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:51:28.293] ubi2:dml_code is mounted. [2025-09-23 21:51:28.293] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:51:28.293] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:51:28.293] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:51:28.293] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:51:28.293] data.LB_FadeInType0=100 [2025-09-23 21:51:28.293] data.CHLH_FadeInType0=0 [2025-09-23 21:51:28.293] data.WU_FadeInDelay=0 [2025-09-23 21:51:28.293] max_time_out=0 [2025-09-23 21:51:28.293] No splash screen [2025-09-23 21:51:28.293] stop dss Done [2025-09-23 21:51:28.382] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:51:28.382] /dev/mem opened. [2025-09-23 21:51:28.382] Memory mapped at address 0xffff9f897000. [2025-09-23 21:51:28.382] Read at address 0x00600018 (0xffff9f897018): 0x00000000 [2025-09-23 21:51:28.382] Write at address 0x00600018 (0xffff9f897018): 0x00400040, readback 0x00400040 [2025-09-23 21:51:28.382] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:51:28.509] Loaded PowerVR consumer services. [2025-09-23 21:51:28.557] 512+0 records in [2025-09-23 21:51:28.557] 512+0 records out [2025-09-23 21:51:28.620] Starting syslogd/klogd: Waiting data available... [2025-09-23 21:51:28.652] done [2025-09-23 21:51:28.652] DML Start [2025-09-23 21:51:28.812] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:51:29.037] DML res1: 0 [2025-09-23 21:51:29.483] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:51:29.483] Read Success [2025-09-23 21:51:29.483] Verifying certificate... [2025-09-23 21:51:29.739] Verified OK [2025-09-23 21:51:29.755] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:51:31.447] Verified OK [2025-09-23 21:51:31.447] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:51:32.119] Verified OK [2025-09-23 21:51:32.119] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:51:34.758] fs.protected_hardlinks = 1 [2025-09-23 21:51:34.758] fs.protected_symlinks = 1 [2025-09-23 21:51:34.774] kernel.modules_disabled = 1 [2025-09-23 21:51:34.981] [2025-09-23 21:51:34.981] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:51:36.149] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:51:43.927] SBL1:1210.0.1.0 [2025-09-23 21:51:43.959] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:51:45.542] SBL2:1210.0.1.0 [2025-09-23 21:51:45.574] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:51:45.669] j-A [2025-09-23 21:51:53.024] The R5 Autosar Classic is running [2025-09-23 21:51:53.047] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:51:53.047] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:51:53.654] INIT: version 2.96 booting [2025-09-23 21:51:53.767] INIT: Entering runlevel: 5 [2025-09-23 21:51:53.910] mtd28 attached [2025-09-23 21:51:53.926] mtd32 attached [2025-09-23 21:51:53.942] mtd24 attached [2025-09-23 21:51:53.991] ubi0:animations is mounted. [2025-09-23 21:51:53.991] RTNETLINK answers: File exists [2025-09-23 21:51:54.045] ubi2:textures is mounted. [2025-09-23 21:51:54.045] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:51:54.045] ubi1:dml_code is mounted. [2025-09-23 21:51:54.045] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:51:54.045] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:51:54.045] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:51:54.045] data.LB_FadeInType0=100 [2025-09-23 21:51:54.045] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:51:54.045] data.CHLH_FadeInType0=0 [2025-09-23 21:51:54.045] data.WU_FadeInDelay=0 [2025-09-23 21:51:54.045] max_time_out=0 [2025-09-23 21:51:54.045] No splash screen [2025-09-23 21:51:54.045] stop dss Done [2025-09-23 21:51:54.125] /dev/mem opened. [2025-09-23 21:51:54.125] Memory mapped at address 0xffff8aae5000. [2025-09-23 21:51:54.125] Read at address 0x00600018 (0xffff8aae5018): 0x00000000 [2025-09-23 21:51:54.125] Write at address 0x00600018 (0xffff8aae5018): 0x00400040, readback 0x00400040 [2025-09-23 21:51:54.125] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:51:54.125] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:51:54.253] Loaded PowerVR consumer services. [2025-09-23 21:51:54.349] 512+0 records in [2025-09-23 21:51:54.349] 512+0 records out [2025-09-23 21:51:54.365] Waiting data available... [2025-09-23 21:51:54.397] Starting syslogd/klogd: done [2025-09-23 21:51:54.413] DML Start [2025-09-23 21:51:54.589] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:51:54.813] DML res1: 0 [2025-09-23 21:51:55.261] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:51:55.277] Read Success [2025-09-23 21:51:55.277] Verifying certificate... [2025-09-23 21:51:55.533] Verified OK [2025-09-23 21:51:55.549] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:51:57.244] Verified OK [2025-09-23 21:51:57.244] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:51:57.850] Verified OK [2025-09-23 21:51:57.850] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:52:00.393] fs.protected_hardlinks = 1 [2025-09-23 21:52:00.409] fs.protected_symlinks = 1 [2025-09-23 21:52:00.409] kernel.modules_disabled = 1 [2025-09-23 21:52:00.601] [2025-09-23 21:52:00.601] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:52:01.919] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:52:09.645] SBL1:1210.0.1.0 [2025-09-23 21:52:09.677] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:52:11.259] SBL2:1210.0.1.0 [2025-09-23 21:52:11.291] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:52:11.387] j-A [2025-09-23 21:52:18.741] The R5 Autosar Classic is running [2025-09-23 21:52:18.766] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:52:18.766] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:52:19.374] INIT: version 2.96 booting [2025-09-23 21:52:19.501] INIT: Entering runlevel: 5 [2025-09-23 21:52:19.646] mtd32 attached [2025-09-23 21:52:19.662] mtd24 attached [2025-09-23 21:52:19.677] mtd28 attached [2025-09-23 21:52:19.694] ubi0:dml_code is mounted. [2025-09-23 21:52:19.709] ubi1:textures is mounted. [2025-09-23 21:52:19.725] RTNETLINK answers: File exists [2025-09-23 21:52:19.780] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:52:19.780] ubi2:animations is mounted. [2025-09-23 21:52:19.780] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:52:19.780] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:52:19.780] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:52:19.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:52:19.780] data.LB_FadeInType0=100 [2025-09-23 21:52:19.780] data.CHLH_FadeInType0=0 [2025-09-23 21:52:19.780] data.WU_FadeInDelay=0 [2025-09-23 21:52:19.780] max_time_out=0 [2025-09-23 21:52:19.780] No splash screen [2025-09-23 21:52:19.780] stop dss Done [2025-09-23 21:52:19.813] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:52:19.813] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:52:19.845] /dev/mem opened. [2025-09-23 21:52:19.845] Memory mapped at address 0xffff95bce000. [2025-09-23 21:52:19.845] Read at address 0x00600018 (0xffff95bce018): 0x00000000 [2025-09-23 21:52:19.845] Write at address 0x00600018 (0xffff95bce018): 0x00400040, readback 0x00400040 [2025-09-23 21:52:19.941] Loaded PowerVR consumer services. [2025-09-23 21:52:20.068] 512+0 records in [2025-09-23 21:52:20.084] 512+0 records out [2025-09-23 21:52:20.084] Waiting data available... [2025-09-23 21:52:20.100] Starting syslogd/klogd: done [2025-09-23 21:52:20.117] DML Start [2025-09-23 21:52:20.324] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:52:20.596] DML res1: 0 [2025-09-23 21:52:20.995] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:52:20.995] Read Success [2025-09-23 21:52:20.995] Verifying certificate... [2025-09-23 21:52:21.267] Verified OK [2025-09-23 21:52:21.283] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:52:22.954] Verified OK [2025-09-23 21:52:22.954] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:52:23.544] Verified OK [2025-09-23 21:52:23.544] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:52:26.150] fs.protected_hardlinks = 1 [2025-09-23 21:52:26.166] fs.protected_symlinks = 1 [2025-09-23 21:52:26.166] kernel.modules_disabled = 1 [2025-09-23 21:52:26.358] [2025-09-23 21:52:26.358] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:52:27.652] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:52:35.384] SBL1:1210.0.1.0 [2025-09-23 21:52:35.416] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:52:36.999] SBL2:1210.0.1.0 [2025-09-23 21:52:37.030] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:52:37.142] j-A [2025-09-23 21:52:44.480] The R5 Autosar Classic is running [2025-09-23 21:52:44.511] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:52:44.511] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:52:45.119] INIT: version 2.96 booting [2025-09-23 21:52:45.230] INIT: Entering runlevel: 5 [2025-09-23 21:52:45.375] mtd28 attached [2025-09-23 21:52:45.391] mtd24 attached [2025-09-23 21:52:45.406] mtd32 attached [2025-09-23 21:52:45.467] ubi0:animations is mounted. [2025-09-23 21:52:45.467] ubi1:textures is mounted. [2025-09-23 21:52:45.467] RTNETLINK answers: File exists [2025-09-23 21:52:45.467] ubi2:dml_code is mounted. [2025-09-23 21:52:45.524] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:52:45.524] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:52:45.524] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:52:45.524] data.LB_FadeInType0=100 [2025-09-23 21:52:45.524] data.CHLH_FadeInType0=0 [2025-09-23 21:52:45.524] data.WU_FadeInDelay=0 [2025-09-23 21:52:45.524] max_time_out=0 [2025-09-23 21:52:45.524] No splash screen [2025-09-23 21:52:45.524] stop dss Done [2025-09-23 21:52:45.524] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:52:45.524] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:52:45.564] /dev/mem opened. [2025-09-23 21:52:45.564] Memory mapped at address 0xffffa4f23000. [2025-09-23 21:52:45.564] Read at address 0x00600018 (0xffffa4f23018): 0x00000000 [2025-09-23 21:52:45.564] Write at address 0x00600018 (0xffffa4f23018): 0x00400040, readback 0x00400040 [2025-09-23 21:52:45.629] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:52:45.645] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:52:45.708] Loaded PowerVR consumer services. [2025-09-23 21:52:45.834] 512+0 records in [2025-09-23 21:52:45.834] 512+0 records out [2025-09-23 21:52:45.834] Waiting data available... [2025-09-23 21:52:45.850] Starting syslogd/klogd: done [2025-09-23 21:52:45.867] DML Start [2025-09-23 21:52:46.074] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:52:46.314] DML res1: 0 [2025-09-23 21:52:46.713] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:52:46.729] Read Success [2025-09-23 21:52:46.729] Verifying certificate... [2025-09-23 21:52:47.033] Verified OK [2025-09-23 21:52:47.049] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:52:48.768] Verified OK [2025-09-23 21:52:48.768] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:52:49.391] Verified OK [2025-09-23 21:52:49.391] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:52:51.965] fs.protected_hardlinks = 1 [2025-09-23 21:52:51.981] fs.protected_symlinks = 1 [2025-09-23 21:52:51.997] kernel.modules_disabled = 1 [2025-09-23 21:52:52.189] [2025-09-23 21:52:52.189] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:52:53.372] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:53:01.116] SBL1:1210.0.1.0 [2025-09-23 21:53:01.164] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:53:02.731] SBL2:1210.0.1.0 [2025-09-23 21:53:02.779] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:53:02.875] j-A [2025-09-23 21:53:10.228] The R5 Autosar Classic is running [2025-09-23 21:53:10.251] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:53:10.251] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:53:10.858] INIT: version 2.96 booting [2025-09-23 21:53:10.971] INIT: Entering runlevel: 5 [2025-09-23 21:53:11.130] mtd24 attached [2025-09-23 21:53:11.130] mtd28 attached [2025-09-23 21:53:11.163] mtd32 attached [2025-09-23 21:53:11.195] ubi0:textures is mounted. [2025-09-23 21:53:11.258] RTNETLINK answers: File exists [2025-09-23 21:53:11.258] ubi1:animations is mounted. [2025-09-23 21:53:11.258] ubi2:dml_code is mounted. [2025-09-23 21:53:11.258] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:53:11.258] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:53:11.258] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:53:11.258] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:53:11.258] data.LB_FadeInType0=100 [2025-09-23 21:53:11.258] data.CHLH_FadeInType0=0 [2025-09-23 21:53:11.258] data.WU_FadeInDelay=0 [2025-09-23 21:53:11.258] max_time_out=0 [2025-09-23 21:53:11.258] No splash screen [2025-09-23 21:53:11.258] stop dss Done [2025-09-23 21:53:11.258] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:53:11.336] /dev/mem opened. [2025-09-23 21:53:11.336] Memory mapped at address 0xffffb4210000. [2025-09-23 21:53:11.336] Read at address 0x00600018 (0xffffb4210018): 0x00000000 [2025-09-23 21:53:11.336] Write at address 0x00600018 (0xffffb4210018): 0x00400040, readback 0x00400040 [2025-09-23 21:53:11.336] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:53:11.336] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:53:11.527] Loaded PowerVR consumer services. [2025-09-23 21:53:11.575] 512+0 records in [2025-09-23 21:53:11.575] 512+0 records out [2025-09-23 21:53:11.591] Waiting data available... [2025-09-23 21:53:11.607] Starting syslogd/klogd: done [2025-09-23 21:53:11.623] DML Start [2025-09-23 21:53:11.815] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:53:12.023] DML res1: 0 [2025-09-23 21:53:12.481] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:53:12.481] Read Success [2025-09-23 21:53:12.481] Verifying certificate... [2025-09-23 21:53:12.720] Verified OK [2025-09-23 21:53:12.752] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:53:14.383] Verified OK [2025-09-23 21:53:14.383] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:53:14.958] Verified OK [2025-09-23 21:53:14.958] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:53:17.676] fs.protected_hardlinks = 1 [2025-09-23 21:53:17.676] fs.protected_symlinks = 1 [2025-09-23 21:53:17.692] kernel.modules_disabled = 1 [2025-09-23 21:53:17.884] [2025-09-23 21:53:17.884] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:53:19.141] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:53:26.857] SBL1:1210.0.1.0 [2025-09-23 21:53:26.889] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:53:28.472] SBL2:1210.0.1.0 [2025-09-23 21:53:28.504] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:53:28.616] j-A [2025-09-23 21:53:35.955] The R5 Autosar Classic is running [2025-09-23 21:53:35.986] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:53:35.986] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:53:36.593] INIT: version 2.96 booting [2025-09-23 21:53:36.705] INIT: Entering runlevel: 5 [2025-09-23 21:53:36.849] mtd24 attached [2025-09-23 21:53:36.865] mtd28 attached [2025-09-23 21:53:36.881] mtd32 attached [2025-09-23 21:53:36.913] RTNETLINK answers: File exists [2025-09-23 21:53:36.985] ubi0:textures is mounted. [2025-09-23 21:53:36.985] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:53:36.985] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:53:36.985] ubi1:animations is mounted. [2025-09-23 21:53:36.985] ubi2:dml_code is mounted. [2025-09-23 21:53:36.985] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:53:36.985] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:53:36.985] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:53:36.985] data.LB_FadeInType0=100 [2025-09-23 21:53:36.985] data.CHLH_FadeInType0=0 [2025-09-23 21:53:36.985] data.WU_FadeInDelay=0 [2025-09-23 21:53:36.985] max_time_out=0 [2025-09-23 21:53:36.985] No splash screen [2025-09-23 21:53:36.985] stop dss Done [2025-09-23 21:53:37.027] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:53:37.027] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:53:37.066] /dev/mem opened. [2025-09-23 21:53:37.066] Memory mapped at address 0xffffbc885000. [2025-09-23 21:53:37.066] Read at address 0x00600018 (0xffffbc885018): 0x00000000 [2025-09-23 21:53:37.066] Write at address 0x00600018 (0xffffbc885018): 0x00400040, readback 0x00400040 [2025-09-23 21:53:37.162] Loaded PowerVR consumer services. [2025-09-23 21:53:37.257] 512+0 records in [2025-09-23 21:53:37.257] 512+0 records out [2025-09-23 21:53:37.306] Waiting data available... [2025-09-23 21:53:37.322] Starting syslogd/klogd: done [2025-09-23 21:53:37.338] DML Start [2025-09-23 21:53:37.545] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:53:37.753] DML res1: 0 [2025-09-23 21:53:38.200] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:53:38.216] Read Success [2025-09-23 21:53:38.216] Verifying certificate... [2025-09-23 21:53:38.440] Verified OK [2025-09-23 21:53:38.456] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:53:40.135] Verified OK [2025-09-23 21:53:40.155] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:53:40.771] Verified OK [2025-09-23 21:53:40.771] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:53:43.426] fs.protected_hardlinks = 1 [2025-09-23 21:53:43.426] fs.protected_symlinks = 1 [2025-09-23 21:53:43.442] kernel.modules_disabled = 1 [2025-09-23 21:53:43.649] [2025-09-23 21:53:43.649] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:53:44.842] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:53:52.585] SBL1:1210.0.1.0 [2025-09-23 21:53:52.633] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:53:54.199] SBL2:1210.0.1.0 [2025-09-23 21:53:54.231] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 21:53:54.343] j-A [2025-09-23 21:54:01.716] The R5 Autosar Classic is running [2025-09-23 21:54:01.716] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:54:01.716] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:54:02.323] INIT: version 2.96 booting [2025-09-23 21:54:02.435] INIT: Entering runlevel: 5 [2025-09-23 21:54:02.579] mtd24 attached [2025-09-23 21:54:02.595] mtd28 attached [2025-09-23 21:54:02.610] mtd32 attached [2025-09-23 21:54:02.689] RTNETLINK answers: File exists [2025-09-23 21:54:02.689] ubi0:textures is mounted. [2025-09-23 21:54:02.689] ubi1:animations is mounted. [2025-09-23 21:54:02.689] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:54:02.689] ubi2:dml_code is mounted. [2025-09-23 21:54:02.689] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:54:02.689] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:54:02.689] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:54:02.724] data.LB_FadeInType0=100 [2025-09-23 21:54:02.724] data.CHLH_FadeInType0=0 [2025-09-23 21:54:02.724] data.WU_FadeInDelay=0 [2025-09-23 21:54:02.724] max_time_out=0 [2025-09-23 21:54:02.724] No splash screen [2025-09-23 21:54:02.724] stop dss Done [2025-09-23 21:54:02.724] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:54:02.804] /dev/mem opened. [2025-09-23 21:54:02.804] Memory mapped at address 0xffff896aa000. [2025-09-23 21:54:02.804] Read at address 0x00600018 (0xffff896aa018): 0x00000000 [2025-09-23 21:54:02.804] Write at address 0x00600018 (0xffff896aa018): 0x00400040, readback 0x00400040 [2025-09-23 21:54:02.804] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:54:02.804] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:54:02.979] Loaded PowerVR consumer services. [2025-09-23 21:54:03.011] Waiting data available... [2025-09-23 21:54:03.027] 512+0 records in [2025-09-23 21:54:03.027] 512+0 records out [2025-09-23 21:54:03.060] Starting syslogd/klogd: done [2025-09-23 21:54:03.076] DML Start [2025-09-23 21:54:03.251] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:54:03.491] DML res1: 0 [2025-09-23 21:54:03.928] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:54:03.928] Read Success [2025-09-23 21:54:03.928] Verifying certificate... [2025-09-23 21:54:04.200] Verified OK [2025-09-23 21:54:04.216] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:54:05.916] Verified OK [2025-09-23 21:54:05.916] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:54:06.524] Verified OK [2025-09-23 21:54:06.524] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:54:09.193] fs.protected_hardlinks = 1 [2025-09-23 21:54:09.193] fs.protected_symlinks = 1 [2025-09-23 21:54:09.209] kernel.modules_disabled = 1 [2025-09-23 21:54:09.400] [2025-09-23 21:54:09.400] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:54:10.566] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:54:18.333] SBL1:1210.0.1.0 [2025-09-23 21:54:18.381] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:54:19.948] SBL2:1210.0.1.0 [2025-09-23 21:54:19.996] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:54:20.092] j-A [2025-09-23 21:54:27.448] The R5 Autosar Classic is running [2025-09-23 21:54:27.469] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:54:27.469] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:54:28.077] INIT: version 2.96 booting [2025-09-23 21:54:28.188] INIT: Entering runlevel: 5 [2025-09-23 21:54:28.348] mtd28 attached [2025-09-23 21:54:28.364] mtd32 attached [2025-09-23 21:54:28.380] mtd24 attached [2025-09-23 21:54:28.412] ubi0:animations is mounted. [2025-09-23 21:54:28.435] RTNETLINK answers: File exists [2025-09-23 21:54:28.435] ubi1:dml_code is mounted. [2025-09-23 21:54:28.435] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:54:28.435] ubi2:textures is mounted. [2025-09-23 21:54:28.478] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:54:28.478] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:54:28.478] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:54:28.478] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:54:28.478] data.LB_FadeInType0=100 [2025-09-23 21:54:28.478] data.CHLH_FadeInType0=0 [2025-09-23 21:54:28.478] data.WU_FadeInDelay=0 [2025-09-23 21:54:28.478] max_time_out=0 [2025-09-23 21:54:28.478] No splash screen [2025-09-23 21:54:28.478] stop dss Done [2025-09-23 21:54:28.494] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:54:28.516] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:54:28.550] /dev/mem opened. [2025-09-23 21:54:28.550] Memory mapped at address 0xffffb16f2000. [2025-09-23 21:54:28.550] Read at address 0x00600018 (0xffffb16f2018): 0x00000000 [2025-09-23 21:54:28.550] Write at address 0x00600018 (0xffffb16f2018): 0x00400040, readback 0x00400040 [2025-09-23 21:54:28.645] Loaded PowerVR consumer services. [2025-09-23 21:54:28.758] 512+0 records in [2025-09-23 21:54:28.758] 512+0 records out [2025-09-23 21:54:28.789] Starting syslogd/klogd: Waiting data available... [2025-09-23 21:54:28.806] done [2025-09-23 21:54:28.822] DML Start [2025-09-23 21:54:29.013] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:54:29.238] DML res1: 0 [2025-09-23 21:54:29.634] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:54:29.634] Read Success [2025-09-23 21:54:29.634] Verifying certificate... [2025-09-23 21:54:29.874] Verified OK [2025-09-23 21:54:29.890] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:54:31.425] Verified OK [2025-09-23 21:54:31.425] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:54:32.069] Verified OK [2025-09-23 21:54:32.069] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:54:34.819] fs.protected_hardlinks = 1 [2025-09-23 21:54:34.835] fs.protected_symlinks = 1 [2025-09-23 21:54:34.850] kernel.modules_disabled = 1 [2025-09-23 21:54:35.042] [2025-09-23 21:54:35.042] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:54:36.335] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:54:44.099] SBL1:1210.0.1.0 [2025-09-23 21:54:44.131] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:54:45.714] SBL2:1210.0.1.0 [2025-09-23 21:54:45.746] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:54:45.843] j-A [2025-09-23 21:54:53.198] The R5 Autosar Classic is running [2025-09-23 21:54:53.221] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:54:53.221] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:54:53.828] INIT: version 2.96 booting [2025-09-23 21:54:53.941] INIT: Entering runlevel: 5 [2025-09-23 21:54:54.085] mtd24 attached [2025-09-23 21:54:54.101] mtd32 attached [2025-09-23 21:54:54.117] mtd28 attached [2025-09-23 21:54:54.133] ubi0:textures is mounted. [2025-09-23 21:54:54.165] RTNETLINK answers: File exists [2025-09-23 21:54:54.220] ubi1:dml_code is mounted. [2025-09-23 21:54:54.220] ubi2:animations is mounted. [2025-09-23 21:54:54.220] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:54:54.220] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:54:54.220] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:54:54.220] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:54:54.220] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:54:54.220] data.LB_FadeInType0=100 [2025-09-23 21:54:54.220] data.CHLH_FadeInType0=0 [2025-09-23 21:54:54.220] data.WU_FadeInDelay=0 [2025-09-23 21:54:54.220] max_time_out=0 [2025-09-23 21:54:54.220] No splash screen [2025-09-23 21:54:54.220] stop dss Done [2025-09-23 21:54:54.268] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:54:54.268] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:54:54.299] /dev/mem opened. [2025-09-23 21:54:54.299] Memory mapped at address 0xffffb5731000. [2025-09-23 21:54:54.299] Read at address 0x00600018 (0xffffb5731018): 0x00000000 [2025-09-23 21:54:54.299] Write at address 0x00600018 (0xffffb5731018): 0x00400040, readback 0x00400040 [2025-09-23 21:54:54.411] Loaded PowerVR consumer services. [2025-09-23 21:54:54.523] 512+0 records in [2025-09-23 21:54:54.523] 512+0 records out [2025-09-23 21:54:54.540] Waiting data available... [2025-09-23 21:54:54.555] Starting syslogd/klogd: done [2025-09-23 21:54:54.572] DML Start [2025-09-23 21:54:54.779] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:54:55.019] DML res1: 0 [2025-09-23 21:54:55.419] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:54:55.440] Read Success [2025-09-23 21:54:55.440] Verifying certificate... [2025-09-23 21:54:55.664] Verified OK [2025-09-23 21:54:55.680] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:54:57.342] Verified OK [2025-09-23 21:54:57.342] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:54:57.950] Verified OK [2025-09-23 21:54:57.950] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:55:00.540] fs.protected_hardlinks = 1 [2025-09-23 21:55:00.540] fs.protected_symlinks = 1 [2025-09-23 21:55:00.556] kernel.modules_disabled = 1 [2025-09-23 21:55:00.748] [2025-09-23 21:55:00.748] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:55:02.102] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:55:09.847] SBL1:1210.0.1.0 [2025-09-23 21:55:09.879] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:55:11.461] SBL2:1210.0.1.0 [2025-09-23 21:55:11.493] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:55:11.605] j-A [2025-09-23 21:55:18.945] The R5 Autosar Classic is running [2025-09-23 21:55:18.970] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:55:18.970] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:55:19.577] INIT: version 2.96 booting [2025-09-23 21:55:19.690] INIT: Entering runlevel: 5 [2025-09-23 21:55:19.849] mtd24 attached [2025-09-23 21:55:19.865] mtd28 attached [2025-09-23 21:55:19.881] mtd32 attached [2025-09-23 21:55:19.913] ubi0:textures is mounted. [2025-09-23 21:55:19.930] RTNETLINK answers: File exists [2025-09-23 21:55:19.965] ubi1:animations is mounted. [2025-09-23 21:55:19.965] ubi2:dml_code is mounted. [2025-09-23 21:55:19.965] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:55:19.965] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:55:19.965] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:55:19.965] data.LB_FadeInType0=100 [2025-09-23 21:55:19.996] data.CHLH_FadeInType0=0 [2025-09-23 21:55:19.996] data.WU_FadeInDelay=0 [2025-09-23 21:55:19.996] max_time_out=0 [2025-09-23 21:55:19.996] No splash screen [2025-09-23 21:55:19.996] stop dss Done [2025-09-23 21:55:19.996] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:55:19.996] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:55:20.053] /dev/mem opened. [2025-09-23 21:55:20.053] Memory mapped at address 0xffff9c2a1000. [2025-09-23 21:55:20.053] Read at address 0x00600018 (0xffff9c2a1018): 0x00000000 [2025-09-23 21:55:20.053] Write at address 0x00600018 (0xffff9c2a1018): 0x00400040, readback 0x00400040 [2025-09-23 21:55:20.101] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:55:20.117] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:55:20.245] Loaded PowerVR consumer services. [2025-09-23 21:55:20.293] 512+0 records in [2025-09-23 21:55:20.293] 512+0 records out [2025-09-23 21:55:20.325] Waiting data available... [2025-09-23 21:55:20.341] Starting syslogd/klogd: done [2025-09-23 21:55:20.373] DML Start [2025-09-23 21:55:20.548] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:55:20.757] DML res1: 0 [2025-09-23 21:55:21.218] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:55:21.218] Read Success [2025-09-23 21:55:21.218] Verifying certificate... [2025-09-23 21:55:21.474] Verified OK [2025-09-23 21:55:21.490] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:55:23.186] Verified OK [2025-09-23 21:55:23.186] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:55:23.849] Verified OK [2025-09-23 21:55:23.849] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:55:26.440] fs.protected_hardlinks = 1 [2025-09-23 21:55:26.440] fs.protected_symlinks = 1 [2025-09-23 21:55:26.440] kernel.modules_disabled = 1 [2025-09-23 21:55:26.648] [2025-09-23 21:55:26.648] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:55:27.856] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:55:35.645] SBL1:1210.0.1.0 [2025-09-23 21:55:35.693] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:55:37.259] SBL2:1210.0.1.0 [2025-09-23 21:55:37.291] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:55:37.404] j-A [2025-09-23 21:55:44.775] The R5 Autosar Classic is running [2025-09-23 21:55:44.775] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:55:44.775] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:55:45.383] INIT: version 2.96 booting [2025-09-23 21:55:45.494] INIT: Entering runlevel: 5 [2025-09-23 21:55:45.655] mtd24 attached [2025-09-23 21:55:45.655] mtd28 attached [2025-09-23 21:55:45.670] mtd32 attached [2025-09-23 21:55:45.702] ubi0:textures is mounted. [2025-09-23 21:55:45.718] RTNETLINK answers: File exists [2025-09-23 21:55:45.759] ubi1:animations is mounted. [2025-09-23 21:55:45.759] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:55:45.759] ubi2:dml_code is mounted. [2025-09-23 21:55:45.759] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:55:45.759] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:55:45.759] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:55:45.759] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:55:45.784] data.LB_FadeInType0=100 [2025-09-23 21:55:45.784] data.CHLH_FadeInType0=0 [2025-09-23 21:55:45.784] data.WU_FadeInDelay=0 [2025-09-23 21:55:45.784] max_time_out=0 [2025-09-23 21:55:45.784] No splash screen [2025-09-23 21:55:45.784] stop dss Done [2025-09-23 21:55:45.832] /dev/mem opened. [2025-09-23 21:55:45.872] Memory mapped at address 0xffffb723f000. [2025-09-23 21:55:45.872] Read at address 0x00600018 (0xffffb723f018): 0x00000000 [2025-09-23 21:55:45.872] Write at address 0x00600018 (0xffffb723f018): 0x00400040, readback 0x00400040 [2025-09-23 21:55:45.872] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:55:45.872] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:55:46.032] Loaded PowerVR consumer services. [2025-09-23 21:55:46.064] 512+0 records in [2025-09-23 21:55:46.064] 512+0 records out [2025-09-23 21:55:46.112] Starting syslogd/klogd: done [2025-09-23 21:55:46.128] Waiting data available... [2025-09-23 21:55:46.143] DML Start [2025-09-23 21:55:46.304] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:55:46.511] DML res1: 0 [2025-09-23 21:55:47.003] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:55:47.003] Read Success [2025-09-23 21:55:47.003] Verifying certificate... [2025-09-23 21:55:47.212] Verified OK [2025-09-23 21:55:47.228] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:55:48.967] Verified OK [2025-09-23 21:55:48.967] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:55:49.564] Verified OK [2025-09-23 21:55:49.564] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:55:52.171] fs.protected_hardlinks = 1 [2025-09-23 21:55:52.171] fs.protected_symlinks = 1 [2025-09-23 21:55:52.187] kernel.modules_disabled = 1 [2025-09-23 21:55:52.378] [2025-09-23 21:55:52.378] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:55:53.610] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:56:01.385] SBL1:1210.0.1.0 [2025-09-23 21:56:01.433] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:56:03.000] SBL2:1210.0.1.0 [2025-09-23 21:56:03.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:56:03.144] j-A [2025-09-23 21:56:10.515] The R5 Autosar Classic is running [2025-09-23 21:56:10.515] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:56:10.515] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:56:11.122] INIT: version 2.96 booting [2025-09-23 21:56:11.234] INIT: Entering runlevel: 5 [2025-09-23 21:56:11.394] mtd32 attached [2025-09-23 21:56:11.394] mtd28 attached [2025-09-23 21:56:11.410] mtd24 attached [2025-09-23 21:56:11.459] RTNETLINK answers: File exists [2025-09-23 21:56:11.459] ubi0:dml_code is mounted. [2025-09-23 21:56:11.520] ubi2:textures is mounted. [2025-09-23 21:56:11.520] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:56:11.520] ubi1:animations is mounted. [2025-09-23 21:56:11.520] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:56:11.520] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:56:11.520] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:56:11.520] data.LB_FadeInType0=100 [2025-09-23 21:56:11.520] data.CHLH_FadeInType0=0 [2025-09-23 21:56:11.520] data.WU_FadeInDelay=0 [2025-09-23 21:56:11.520] max_time_out=0 [2025-09-23 21:56:11.520] No splash screen [2025-09-23 21:56:11.520] stop dss Done [2025-09-23 21:56:11.520] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:56:11.568] /dev/mem opened. [2025-09-23 21:56:11.600] Memory mapped at address 0xffffb6187000. [2025-09-23 21:56:11.600] Read at address 0x00600018 (0xffffb6187018): 0x00000000 [2025-09-23 21:56:11.600] Write at address 0x00600018 (0xffffb6187018): 0x00400040, readback 0x00400040 [2025-09-23 21:56:11.600] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:56:11.616] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:56:11.744] Loaded PowerVR consumer services. [2025-09-23 21:56:11.840] 512+0 records in [2025-09-23 21:56:11.840] 512+0 records out [2025-09-23 21:56:11.856] Waiting data available... [2025-09-23 21:56:11.871] Starting syslogd/klogd: done [2025-09-23 21:56:11.887] DML Start [2025-09-23 21:56:12.063] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:56:12.304] DML res1: 0 [2025-09-23 21:56:12.671] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:56:12.694] Read Success [2025-09-23 21:56:12.694] Verifying certificate... [2025-09-23 21:56:12.966] Verified OK [2025-09-23 21:56:12.982] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:56:14.677] Verified OK [2025-09-23 21:56:14.677] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:56:15.309] Verified OK [2025-09-23 21:56:15.309] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:56:17.947] fs.protected_hardlinks = 1 [2025-09-23 21:56:17.947] fs.protected_symlinks = 1 [2025-09-23 21:56:17.963] kernel.modules_disabled = 1 [2025-09-23 21:56:18.155] [2025-09-23 21:56:18.155] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:56:19.407] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:56:27.141] SBL1:1210.0.1.0 [2025-09-23 21:56:27.173] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:56:28.756] SBL2:1210.0.1.0 [2025-09-23 21:56:28.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:56:28.884] j-A [2025-09-23 21:56:36.237] The R5 Autosar Classic is running [2025-09-23 21:56:36.262] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:56:36.262] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:56:36.870] INIT: version 2.96 booting [2025-09-23 21:56:36.981] INIT: Entering runlevel: 5 [2025-09-23 21:56:37.142] mtd32 attached [2025-09-23 21:56:37.157] mtd28 attached [2025-09-23 21:56:37.157] mtd24 attached [2025-09-23 21:56:37.205] ubi0:dml_code is mounted. [2025-09-23 21:56:37.205] RTNETLINK answers: File exists [2025-09-23 21:56:37.267] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:56:37.267] ubi1:animations is mounted. [2025-09-23 21:56:37.267] ubi2:textures is mounted. [2025-09-23 21:56:37.267] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:56:37.267] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:56:37.267] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:56:37.267] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:56:37.267] data.LB_FadeInType0=100 [2025-09-23 21:56:37.267] data.CHLH_FadeInType0=0 [2025-09-23 21:56:37.267] data.WU_FadeInDelay=0 [2025-09-23 21:56:37.267] max_time_out=0 [2025-09-23 21:56:37.267] No splash screen [2025-09-23 21:56:37.267] stop dss Done [2025-09-23 21:56:37.353] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:56:37.353] /dev/mem opened. [2025-09-23 21:56:37.353] Memory mapped at address 0xffffa18c4000. [2025-09-23 21:56:37.353] Read at address 0x00600018 (0xffffa18c4018): 0x00000000 [2025-09-23 21:56:37.353] Write at address 0x00600018 (0xffffa18c4018): 0x00400040, readback 0x00400040 [2025-09-23 21:56:37.353] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:56:37.530] Loaded PowerVR consumer services. [2025-09-23 21:56:37.545] 512+0 records in [2025-09-23 21:56:37.561] 512+0 records out [2025-09-23 21:56:37.577] Waiting data available... [2025-09-23 21:56:37.593] Starting syslogd/klogd: done [2025-09-23 21:56:37.609] DML Start [2025-09-23 21:56:37.785] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:56:38.009] DML res1: 0 [2025-09-23 21:56:38.464] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:56:38.464] Read Success [2025-09-23 21:56:38.464] Verifying certificate... [2025-09-23 21:56:38.751] Verified OK [2025-09-23 21:56:38.767] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:56:40.446] Verified OK [2025-09-23 21:56:40.446] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:56:41.065] Verified OK [2025-09-23 21:56:41.065] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:56:43.736] fs.protected_hardlinks = 1 [2025-09-23 21:56:43.736] fs.protected_symlinks = 1 [2025-09-23 21:56:43.752] kernel.modules_disabled = 1 [2025-09-23 21:56:43.943] [2025-09-23 21:56:43.943] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:56:45.091] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:56:52.870] SBL1:1210.0.1.0 [2025-09-23 21:56:52.918] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:56:54.501] SBL2:1210.0.1.0 [2025-09-23 21:56:54.533] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:56:54.629] j-A [2025-09-23 21:57:01.983] The R5 Autosar Classic is running [2025-09-23 21:57:02.007] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:57:02.007] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:57:02.614] INIT: version 2.96 booting [2025-09-23 21:57:02.727] INIT: Entering runlevel: 5 [2025-09-23 21:57:02.870] mtd28 attached [2025-09-23 21:57:02.886] mtd24 attached [2025-09-23 21:57:02.902] mtd32 attached [2025-09-23 21:57:02.918] ubi0:animations is mounted. [2025-09-23 21:57:03.001] RTNETLINK answers: File exists [2025-09-23 21:57:03.001] ubi1:textures is mounted. [2025-09-23 21:57:03.001] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:57:03.001] ubi2:dml_code is mounted. [2025-09-23 21:57:03.001] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:57:03.001] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:57:03.001] data.LB_FadeInType0=100 [2025-09-23 21:57:03.001] data.CHLH_FadeInType0=0 [2025-09-23 21:57:03.001] data.WU_FadeInDelay=0 [2025-09-23 21:57:03.001] max_time_out=0 [2025-09-23 21:57:03.001] No splash screen [2025-09-23 21:57:03.001] stop dss Done [2025-09-23 21:57:03.001] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:57:03.001] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:57:03.072] /dev/mem opened. [2025-09-23 21:57:03.072] Memory mapped at address 0xffffa32ca000. [2025-09-23 21:57:03.072] Read at address 0x00600018 (0xffffa32ca018): 0x00000000 [2025-09-23 21:57:03.072] Write at address 0x00600018 (0xffffa32ca018): 0x00400040, readback 0x00400040 [2025-09-23 21:57:03.104] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:57:03.120] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:57:03.279] Loaded PowerVR consumer services. [2025-09-23 21:57:03.311] 512+0 records in [2025-09-23 21:57:03.311] 512+0 records out [2025-09-23 21:57:03.343] Starting syslogd/klogd: done [2025-09-23 21:57:03.375] Waiting data available... [2025-09-23 21:57:03.375] DML Start [2025-09-23 21:57:03.567] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:57:03.791] DML res1: 0 [2025-09-23 21:57:04.206] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:57:04.222] Read Success [2025-09-23 21:57:04.222] Verifying certificate... [2025-09-23 21:57:04.495] Verified OK [2025-09-23 21:57:04.511] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:57:06.266] Verified OK [2025-09-23 21:57:06.266] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:57:06.830] Verified OK [2025-09-23 21:57:06.830] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:57:09.308] fs.protected_hardlinks = 1 [2025-09-23 21:57:09.324] fs.protected_symlinks = 1 [2025-09-23 21:57:09.340] kernel.modules_disabled = 1 [2025-09-23 21:57:09.516] [2025-09-23 21:57:09.516] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:57:10.869] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:57:18.639] SBL1:1210.0.1.0 [2025-09-23 21:57:18.670] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:57:20.254] SBL2:1210.0.1.0 [2025-09-23 21:57:20.286] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:57:20.398] j-A [2025-09-23 21:57:27.769] The R5 Autosar Classic is running [2025-09-23 21:57:27.769] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:57:27.769] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:57:28.376] INIT: version 2.96 booting [2025-09-23 21:57:28.488] INIT: Entering runlevel: 5 [2025-09-23 21:57:28.632] mtd24 attached [2025-09-23 21:57:28.648] mtd28 attached [2025-09-23 21:57:28.664] mtd32 attached [2025-09-23 21:57:28.680] ubi0:textures is mounted. [2025-09-23 21:57:28.712] RTNETLINK answers: File exists [2025-09-23 21:57:28.712] ubi1:animations is mounted. [2025-09-23 21:57:28.766] ubi2:dml_code is mounted. [2025-09-23 21:57:28.766] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:57:28.766] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:57:28.766] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:57:28.766] data.LB_FadeInType0=100 [2025-09-23 21:57:28.766] data.CHLH_FadeInType0=0 [2025-09-23 21:57:28.766] data.WU_FadeInDelay=0 [2025-09-23 21:57:28.766] max_time_out=0 [2025-09-23 21:57:28.766] No splash screen [2025-09-23 21:57:28.766] stop dss Done [2025-09-23 21:57:28.766] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:57:28.766] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:57:28.814] /dev/mem opened. [2025-09-23 21:57:28.814] Memory mapped at address 0xffff90d64000. [2025-09-23 21:57:28.861] Read at address 0x00600018 (0xffff90d64018): 0x00000000 [2025-09-23 21:57:28.861] Write at address 0x00600018 (0xffff90d64018): 0x00400040, readback 0x00400040 [2025-09-23 21:57:28.861] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:57:28.861] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:57:28.972] Loaded PowerVR consumer services. [2025-09-23 21:57:29.098] 512+0 records in [2025-09-23 21:57:29.098] 512+0 records out [2025-09-23 21:57:29.098] Waiting data available... [2025-09-23 21:57:29.130] Starting syslogd/klogd: done [2025-09-23 21:57:29.146] DML Start [2025-09-23 21:57:29.321] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:57:29.497] DML res1: 0 [2025-09-23 21:57:30.009] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:57:30.030] Read Success [2025-09-23 21:57:30.030] Verifying certificate... [2025-09-23 21:57:30.253] Verified OK [2025-09-23 21:57:30.269] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:57:31.929] Verified OK [2025-09-23 21:57:31.929] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:57:32.547] Verified OK [2025-09-23 21:57:32.547] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:57:35.233] fs.protected_hardlinks = 1 [2025-09-23 21:57:35.233] fs.protected_symlinks = 1 [2025-09-23 21:57:35.249] kernel.modules_disabled = 1 [2025-09-23 21:57:35.456] [2025-09-23 21:57:35.456] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:57:36.640] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:57:44.367] SBL1:1210.0.1.0 [2025-09-23 21:57:44.415] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:57:45.981] SBL2:1210.0.1.0 [2025-09-23 21:57:46.013] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 21:57:46.125] j-A [2025-09-23 21:57:53.498] The R5 Autosar Classic is running [2025-09-23 21:57:53.498] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:57:53.498] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:57:54.105] INIT: version 2.96 booting [2025-09-23 21:57:54.217] INIT: Entering runlevel: 5 [2025-09-23 21:57:54.361] mtd28 attached [2025-09-23 21:57:54.377] mtd32 attached [2025-09-23 21:57:54.393] mtd24 attached [2025-09-23 21:57:54.425] ubi0:animations is mounted. [2025-09-23 21:57:54.441] RTNETLINK answers: File exists [2025-09-23 21:57:54.441] ubi1:dml_code is mounted. [2025-09-23 21:57:54.497] ubi2:textures is mounted. [2025-09-23 21:57:54.497] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:57:54.497] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:57:54.497] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:57:54.497] data.LB_FadeInType0=100 [2025-09-23 21:57:54.497] data.CHLH_FadeInType0=0 [2025-09-23 21:57:54.497] data.WU_FadeInDelay=0 [2025-09-23 21:57:54.497] max_time_out=0 [2025-09-23 21:57:54.497] No splash screen [2025-09-23 21:57:54.497] stop dss Done [2025-09-23 21:57:54.497] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:57:54.497] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:57:54.544] /dev/mem opened. [2025-09-23 21:57:54.577] Memory mapped at address 0xffff8373e000. [2025-09-23 21:57:54.577] Read at address 0x00600018 (0xffff8373e018): 0x00000000 [2025-09-23 21:57:54.577] Write at address 0x00600018 (0xffff8373e018): 0x00400040, readback 0x00400040 [2025-09-23 21:57:54.577] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:57:54.593] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:57:54.705] Loaded PowerVR consumer services. [2025-09-23 21:57:54.825] Waiting data available... [2025-09-23 21:57:54.825] 512+0 records in [2025-09-23 21:57:54.825] 512+0 records out [2025-09-23 21:57:54.857] Starting syslogd/klogd: done [2025-09-23 21:57:54.873] DML Start [2025-09-23 21:57:55.065] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:57:55.288] DML res1: 0 [2025-09-23 21:57:55.732] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:57:55.732] Read Success [2025-09-23 21:57:55.732] Verifying certificate... [2025-09-23 21:57:55.956] Verified OK [2025-09-23 21:57:55.956] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:57:57.571] Verified OK [2025-09-23 21:57:57.571] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:57:58.162] Verified OK [2025-09-23 21:57:58.162] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:58:00.976] fs.protected_hardlinks = 1 [2025-09-23 21:58:00.976] fs.protected_symlinks = 1 [2025-09-23 21:58:00.991] kernel.modules_disabled = 1 [2025-09-23 21:58:01.199] [2025-09-23 21:58:01.199] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:58:02.358] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:58:10.111] SBL1:1210.0.1.0 [2025-09-23 21:58:10.143] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:58:11.727] SBL2:1210.0.1.0 [2025-09-23 21:58:11.759] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:58:11.855] j-A [2025-09-23 21:58:19.210] The R5 Autosar Classic is running [2025-09-23 21:58:19.234] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:58:19.234] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:58:19.842] INIT: version 2.96 booting [2025-09-23 21:58:19.954] INIT: Entering runlevel: 5 [2025-09-23 21:58:20.113] mtd24 attached [2025-09-23 21:58:20.130] mtd32 attached [2025-09-23 21:58:20.130] mtd28 attached [2025-09-23 21:58:20.162] ubi0:textures is mounted. [2025-09-23 21:58:20.178] RTNETLINK answers: File exists [2025-09-23 21:58:20.246] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:58:20.246] ubi2:animations is mounted. [2025-09-23 21:58:20.246] ubi1:dml_code is mounted. [2025-09-23 21:58:20.246] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:58:20.246] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:58:20.246] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:58:20.246] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:58:20.246] data.LB_FadeInType0=100 [2025-09-23 21:58:20.246] data.CHLH_FadeInType0=0 [2025-09-23 21:58:20.246] data.WU_FadeInDelay=0 [2025-09-23 21:58:20.246] max_time_out=0 [2025-09-23 21:58:20.246] No splash screen [2025-09-23 21:58:20.246] stop dss Done [2025-09-23 21:58:20.277] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:58:20.312] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:58:20.312] /dev/mem opened. [2025-09-23 21:58:20.312] Memory mapped at address 0xffffa2303000. [2025-09-23 21:58:20.312] Read at address 0x00600018 (0xffffa2303018): 0x00000000 [2025-09-23 21:58:20.312] Write at address 0x00600018 (0xffffa2303018): 0x00400040, readback 0x00400040 [2025-09-23 21:58:20.440] Loaded PowerVR consumer services. [2025-09-23 21:58:20.567] Waiting data available... [2025-09-23 21:58:20.567] 512+0 records in [2025-09-23 21:58:20.567] 512+0 records out [2025-09-23 21:58:20.599] Starting syslogd/klogd: done [2025-09-23 21:58:20.615] DML Start [2025-09-23 21:58:20.775] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:58:21.014] DML res1: 0 [2025-09-23 21:58:21.457] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:58:21.457] Read Success [2025-09-23 21:58:21.457] Verifying certificate... [2025-09-23 21:58:21.681] Verified OK [2025-09-23 21:58:21.697] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:58:23.376] Verified OK [2025-09-23 21:58:23.376] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:58:23.951] Verified OK [2025-09-23 21:58:23.951] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:58:26.525] fs.protected_hardlinks = 1 [2025-09-23 21:58:26.525] fs.protected_symlinks = 1 [2025-09-23 21:58:26.541] kernel.modules_disabled = 1 [2025-09-23 21:58:26.733] [2025-09-23 21:58:26.733] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:58:28.136] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:58:35.847] SBL1:1210.0.1.0 [2025-09-23 21:58:35.895] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:58:37.461] SBL2:1210.0.1.0 [2025-09-23 21:58:37.493] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:58:37.606] j-A [2025-09-23 21:58:44.979] The R5 Autosar Classic is running [2025-09-23 21:58:44.979] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:58:44.979] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:58:45.587] INIT: version 2.96 booting [2025-09-23 21:58:45.699] INIT: Entering runlevel: 5 [2025-09-23 21:58:45.843] mtd24 attached [2025-09-23 21:58:45.859] mtd28 attached [2025-09-23 21:58:45.874] mtd32 attached [2025-09-23 21:58:45.923] ubi0:textures is mounted. [2025-09-23 21:58:45.923] RTNETLINK answers: File exists [2025-09-23 21:58:45.979] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:58:45.979] ubi1:animations is mounted. [2025-09-23 21:58:45.979] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:58:45.979] ubi2:dml_code is mounted. [2025-09-23 21:58:45.979] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:58:45.979] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:58:45.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:58:45.979] data.LB_FadeInType0=100 [2025-09-23 21:58:45.979] data.CHLH_FadeInType0=0 [2025-09-23 21:58:45.979] data.WU_FadeInDelay=0 [2025-09-23 21:58:45.979] max_time_out=0 [2025-09-23 21:58:45.979] No splash screen [2025-09-23 21:58:45.979] stop dss Done [2025-09-23 21:58:46.058] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:58:46.058] /dev/mem opened. [2025-09-23 21:58:46.058] Memory mapped at address 0xffffb74b7000. [2025-09-23 21:58:46.058] Read at address 0x00600018 (0xffffb74b7018): 0x00000000 [2025-09-23 21:58:46.058] Write at address 0x00600018 (0xffffb74b7018): 0x00400040, readback 0x00400040 [2025-09-23 21:58:46.058] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:58:46.233] Loaded PowerVR consumer services. [2025-09-23 21:58:46.281] 512+0 records in [2025-09-23 21:58:46.281] 512+0 records out [2025-09-23 21:58:46.297] Waiting data available... [2025-09-23 21:58:46.329] Starting syslogd/klogd: done [2025-09-23 21:58:46.345] DML Start [2025-09-23 21:58:46.505] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:58:46.745] DML res1: 0 [2025-09-23 21:58:47.219] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:58:47.219] Read Success [2025-09-23 21:58:47.219] Verifying certificate... [2025-09-23 21:58:47.459] Verified OK [2025-09-23 21:58:47.475] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:58:49.075] Verified OK [2025-09-23 21:58:49.096] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:58:49.719] Verified OK [2025-09-23 21:58:49.719] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:58:52.501] fs.protected_hardlinks = 1 [2025-09-23 21:58:52.501] fs.protected_symlinks = 1 [2025-09-23 21:58:52.517] kernel.modules_disabled = 1 [2025-09-23 21:58:52.708] [2025-09-23 21:58:52.708] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:58:53.834] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:59:01.571] SBL1:1210.0.1.0 [2025-09-23 21:59:01.619] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:59:03.186] SBL2:1210.0.1.0 [2025-09-23 21:59:03.234] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:59:03.330] j-A [2025-09-23 21:59:10.686] The R5 Autosar Classic is running [2025-09-23 21:59:10.708] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:59:10.708] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:59:11.315] INIT: version 2.96 booting [2025-09-23 21:59:11.427] INIT: Entering runlevel: 5 [2025-09-23 21:59:11.588] mtd24 attached [2025-09-23 21:59:11.588] mtd28 attached [2025-09-23 21:59:11.604] mtd32 attached [2025-09-23 21:59:11.652] ubi1:animations is mounted. [2025-09-23 21:59:11.652] ubi0:textures is mounted. [2025-09-23 21:59:11.667] RTNETLINK answers: File exists [2025-09-23 21:59:11.667] ubi2:dml_code is mounted. [2025-09-23 21:59:11.720] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:59:11.720] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:59:11.720] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:59:11.720] data.LB_FadeInType0=100 [2025-09-23 21:59:11.720] data.CHLH_FadeInType0=0 [2025-09-23 21:59:11.720] data.WU_FadeInDelay=0 [2025-09-23 21:59:11.720] max_time_out=0 [2025-09-23 21:59:11.720] No splash screen [2025-09-23 21:59:11.720] stop dss Done [2025-09-23 21:59:11.720] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:59:11.720] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:59:11.752] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:59:11.800] /dev/mem opened. [2025-09-23 21:59:11.800] Memory mapped at address 0xffff8c032000. [2025-09-23 21:59:11.800] Read at address 0x00600018 (0xffff8c032018): 0x00000000 [2025-09-23 21:59:11.800] Write at address 0x00600018 (0xffff8c032018): 0x00400040, readback 0x00400040 [2025-09-23 21:59:11.800] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:59:11.976] Loaded PowerVR consumer services. [2025-09-23 21:59:11.992] 512+0 records in [2025-09-23 21:59:12.008] 512+0 records out [2025-09-23 21:59:12.040] Waiting data available... [2025-09-23 21:59:12.040] Starting syslogd/klogd: done [2025-09-23 21:59:12.056] DML Start [2025-09-23 21:59:12.200] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:59:12.472] DML res1: 0 [2025-09-23 21:59:12.886] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:59:12.886] Read Success [2025-09-23 21:59:12.886] Verifying certificate... [2025-09-23 21:59:13.110] Verified OK [2025-09-23 21:59:13.126] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:59:14.629] Verified OK [2025-09-23 21:59:14.629] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:59:15.301] Verified OK [2025-09-23 21:59:15.317] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:59:18.083] fs.protected_hardlinks = 1 [2025-09-23 21:59:18.083] fs.protected_symlinks = 1 [2025-09-23 21:59:18.099] kernel.modules_disabled = 1 [2025-09-23 21:59:18.291] [2025-09-23 21:59:18.291] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:59:19.594] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:59:27.313] SBL1:1210.0.1.0 [2025-09-23 21:59:27.345] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:59:28.927] SBL2:1210.0.1.0 [2025-09-23 21:59:28.959] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:59:29.071] j-A [2025-09-23 21:59:36.411] The R5 Autosar Classic is running [2025-09-23 21:59:36.442] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 21:59:36.442] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 21:59:37.050] INIT: version 2.96 booting [2025-09-23 21:59:37.161] INIT: Entering runlevel: 5 [2025-09-23 21:59:37.321] mtd28 attached [2025-09-23 21:59:37.321] mtd24 attached [2025-09-23 21:59:37.337] mtd32 attached [2025-09-23 21:59:37.353] ubi0:animations is mounted. [2025-09-23 21:59:37.385] RTNETLINK answers: File exists [2025-09-23 21:59:37.385] ubi1:textures is mounted. [2025-09-23 21:59:37.443] ubi2:dml_code is mounted. [2025-09-23 21:59:37.443] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 21:59:37.443] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 21:59:37.443] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 21:59:37.443] data.LB_FadeInType0=100 [2025-09-23 21:59:37.443] data.CHLH_FadeInType0=0 [2025-09-23 21:59:37.443] data.WU_FadeInDelay=0 [2025-09-23 21:59:37.443] max_time_out=0 [2025-09-23 21:59:37.443] No splash screen [2025-09-23 21:59:37.443] stop dss Done [2025-09-23 21:59:37.443] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 21:59:37.443] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 21:59:37.512] /dev/mem opened. [2025-09-23 21:59:37.512] Memory mapped at address 0xffffa9c00000. [2025-09-23 21:59:37.512] Read at address 0x00600018 (0xffffa9c00018): 0x00000000 [2025-09-23 21:59:37.512] Write at address 0x00600018 (0xffffa9c00018): 0x00400040, readback 0x00400040 [2025-09-23 21:59:37.544] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 21:59:37.560] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 21:59:37.655] Loaded PowerVR consumer services. [2025-09-23 21:59:37.751] 512+0 records in [2025-09-23 21:59:37.751] 512+0 records out [2025-09-23 21:59:37.767] Waiting data available... [2025-09-23 21:59:37.799] Starting syslogd/klogd: done [2025-09-23 21:59:37.815] DML Start [2025-09-23 21:59:37.975] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 21:59:38.232] DML res1: 0 [2025-09-23 21:59:38.686] Read DML Algo certificate (mtd31) and save to file [2025-09-23 21:59:38.686] Read Success [2025-09-23 21:59:38.686] Verifying certificate... [2025-09-23 21:59:38.973] Verified OK [2025-09-23 21:59:39.005] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 21:59:40.712] Verified OK [2025-09-23 21:59:40.712] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 21:59:41.327] Verified OK [2025-09-23 21:59:41.327] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 21:59:43.901] fs.protected_hardlinks = 1 [2025-09-23 21:59:43.901] fs.protected_symlinks = 1 [2025-09-23 21:59:43.917] kernel.modules_disabled = 1 [2025-09-23 21:59:44.109] [2025-09-23 21:59:44.109] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 21:59:45.308] RTNETLINK answers: Cannot assign requested address [2025-09-23 21:59:53.045] SBL1:1210.0.1.0 [2025-09-23 21:59:53.093] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:59:54.661] SBL2:1210.0.1.0 [2025-09-23 21:59:54.692] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 21:59:54.804] j-A [2025-09-23 22:00:02.179] The R5 Autosar Classic is running [2025-09-23 22:00:02.179] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:00:02.179] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:00:02.787] INIT: version 2.96 booting [2025-09-23 22:00:02.898] INIT: Entering runlevel: 5 [2025-09-23 22:00:03.059] mtd32 attached [2025-09-23 22:00:03.059] mtd28 attached [2025-09-23 22:00:03.074] mtd24 attached [2025-09-23 22:00:03.122] RTNETLINK answers: File exists [2025-09-23 22:00:03.122] ubi0:dml_code is mounted. [2025-09-23 22:00:03.176] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:00:03.176] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:00:03.176] ubi2:textures is mounted. [2025-09-23 22:00:03.176] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:00:03.176] ubi1:animations is mounted. [2025-09-23 22:00:03.176] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:00:03.176] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:00:03.176] data.LB_FadeInType0=100 [2025-09-23 22:00:03.176] data.CHLH_FadeInType0=0 [2025-09-23 22:00:03.176] data.WU_FadeInDelay=0 [2025-09-23 22:00:03.176] max_time_out=0 [2025-09-23 22:00:03.176] No splash screen [2025-09-23 22:00:03.176] stop dss Done [2025-09-23 22:00:03.209] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:00:03.224] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:00:03.259] /dev/mem opened. [2025-09-23 22:00:03.260] Memory mapped at address 0xffffaeef7000. [2025-09-23 22:00:03.260] Read at address 0x00600018 (0xffffaeef7018): 0x00000000 [2025-09-23 22:00:03.260] Write at address 0x00600018 (0xffffaeef7018): 0x00400040, readback 0x00400040 [2025-09-23 22:00:03.451] Loaded PowerVR consumer services. [2025-09-23 22:00:03.483] 512+0 records in [2025-09-23 22:00:03.483] 512+0 records out [2025-09-23 22:00:03.498] Starting syslogd/klogd: done [2025-09-23 22:00:03.547] Waiting data available... [2025-09-23 22:00:03.547] DML Start [2025-09-23 22:00:03.755] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:00:03.995] DML res1: 0 [2025-09-23 22:00:04.346] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:00:04.367] Read Success [2025-09-23 22:00:04.367] Verifying certificate... [2025-09-23 22:00:04.592] Verified OK [2025-09-23 22:00:04.608] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:00:06.152] Verified OK [2025-09-23 22:00:06.152] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:00:06.823] Verified OK [2025-09-23 22:00:06.823] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:00:09.509] fs.protected_hardlinks = 1 [2025-09-23 22:00:09.509] fs.protected_symlinks = 1 [2025-09-23 22:00:09.525] kernel.modules_disabled = 1 [2025-09-23 22:00:09.718] [2025-09-23 22:00:09.718] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:00:11.050] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:00:18.790] SBL1:1210.0.1.0 [2025-09-23 22:00:18.822] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:00:20.405] SBL2:1210.0.1.0 [2025-09-23 22:00:20.437] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:00:20.548] j-A [2025-09-23 22:00:27.887] The R5 Autosar Classic is running [2025-09-23 22:00:27.912] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:00:27.912] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:00:28.519] INIT: version 2.96 booting [2025-09-23 22:00:28.647] INIT: Entering runlevel: 5 [2025-09-23 22:00:28.791] mtd24 attached [2025-09-23 22:00:28.807] mtd32 attached [2025-09-23 22:00:28.823] ubi0:textures is mounted. [2025-09-23 22:00:28.839] mtd28 attached [2025-09-23 22:00:28.891] RTNETLINK answers: File exists [2025-09-23 22:00:28.891] ubi1:dml_code is mounted. [2025-09-23 22:00:28.891] ubi2:animations is mounted. [2025-09-23 22:00:28.891] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:00:28.891] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:00:28.891] data.LB_FadeInType0=100 [2025-09-23 22:00:28.923] data.CHLH_FadeInType0=0 [2025-09-23 22:00:28.923] data.WU_FadeInDelay=0 [2025-09-23 22:00:28.923] max_time_out=0 [2025-09-23 22:00:28.923] No splash screen [2025-09-23 22:00:28.923] stop dss Done [2025-09-23 22:00:28.923] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:00:28.923] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:00:28.923] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:00:28.954] /dev/mem opened. [2025-09-23 22:00:28.986] Memory mapped at address 0xffff8c54a000. [2025-09-23 22:00:28.986] Read at address 0x00600018 (0xffff8c54a018): 0x00000000 [2025-09-23 22:00:28.986] Write at address 0x00600018 (0xffff8c54a018): 0x00400040, readback 0x00400040 [2025-09-23 22:00:29.002] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:00:29.018] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:00:29.179] Loaded PowerVR consumer services. [2025-09-23 22:00:29.210] 512+0 records in [2025-09-23 22:00:29.226] 512+0 records out [2025-09-23 22:00:29.242] Starting syslogd/klogd: done [2025-09-23 22:00:29.290] Waiting data available... [2025-09-23 22:00:29.290] DML Start [2025-09-23 22:00:29.514] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:00:29.722] DML res1: 0 [2025-09-23 22:00:30.131] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:00:30.131] Read Success [2025-09-23 22:00:30.131] Verifying certificate... [2025-09-23 22:00:30.403] Verified OK [2025-09-23 22:00:30.435] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:00:32.134] Verified OK [2025-09-23 22:00:32.134] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:00:32.750] Verified OK [2025-09-23 22:00:32.750] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:00:35.309] fs.protected_hardlinks = 1 [2025-09-23 22:00:35.325] fs.protected_symlinks = 1 [2025-09-23 22:00:35.325] kernel.modules_disabled = 1 [2025-09-23 22:00:35.532] [2025-09-23 22:00:35.532] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:00:36.778] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:00:44.525] SBL1:1210.0.1.0 [2025-09-23 22:00:44.573] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:00:46.140] SBL2:1210.0.1.0 [2025-09-23 22:00:46.171] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:00:46.284] j-A [2025-09-23 22:00:53.637] The R5 Autosar Classic is running [2025-09-23 22:00:53.637] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:00:53.658] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:00:54.266] INIT: version 2.96 booting [2025-09-23 22:00:54.378] INIT: Entering runlevel: 5 [2025-09-23 22:00:54.522] mtd24 attached [2025-09-23 22:00:54.538] mtd28 attached [2025-09-23 22:00:54.554] mtd32 attached [2025-09-23 22:00:54.570] ubi0:textures is mounted. [2025-09-23 22:00:54.602] RTNETLINK answers: File exists [2025-09-23 22:00:54.602] ubi1:animations is mounted. [2025-09-23 22:00:54.659] ubi2:dml_code is mounted. [2025-09-23 22:00:54.659] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:00:54.659] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:00:54.659] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:00:54.659] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:00:54.659] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:00:54.659] data.LB_FadeInType0=100 [2025-09-23 22:00:54.659] data.CHLH_FadeInType0=0 [2025-09-23 22:00:54.659] data.WU_FadeInDelay=0 [2025-09-23 22:00:54.659] max_time_out=0 [2025-09-23 22:00:54.659] No splash screen [2025-09-23 22:00:54.659] stop dss Done [2025-09-23 22:00:54.674] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:00:54.726] /dev/mem opened. [2025-09-23 22:00:54.726] Memory mapped at address 0xffffb9517000. [2025-09-23 22:00:54.726] Read at address 0x00600018 (0xffffb9517018): 0x00000000 [2025-09-23 22:00:54.726] Write at address 0x00600018 (0xffffb9517018): 0x00400040, readback 0x00400040 [2025-09-23 22:00:54.726] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:00:54.934] Loaded PowerVR consumer services. [2025-09-23 22:00:54.950] Waiting data available... [2025-09-23 22:00:54.982] 512+0 records in [2025-09-23 22:00:54.982] 512+0 records out [2025-09-23 22:00:55.030] Starting syslogd/klogd: done [2025-09-23 22:00:55.046] DML Start [2025-09-23 22:00:55.207] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:00:55.431] DML res1: 0 [2025-09-23 22:00:55.887] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:00:55.887] Read Success [2025-09-23 22:00:55.887] Verifying certificate... [2025-09-23 22:00:56.111] Verified OK [2025-09-23 22:00:56.127] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:00:57.838] Verified OK [2025-09-23 22:00:57.838] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:00:58.439] Verified OK [2025-09-23 22:00:58.439] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:01:01.109] fs.protected_hardlinks = 1 [2025-09-23 22:01:01.109] fs.protected_symlinks = 1 [2025-09-23 22:01:01.125] kernel.modules_disabled = 1 [2025-09-23 22:01:01.317] [2025-09-23 22:01:01.317] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:01:02.561] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:01:10.282] SBL1:1210.0.1.0 [2025-09-23 22:01:10.330] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:01:11.897] SBL2:1210.0.1.0 [2025-09-23 22:01:11.929] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 22:01:12.041] j-A [2025-09-23 22:01:19.413] The R5 Autosar Classic is running [2025-09-23 22:01:19.413] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:01:19.413] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:01:20.021] INIT: version 2.96 booting [2025-09-23 22:01:20.133] INIT: Entering runlevel: 5 [2025-09-23 22:01:20.277] mtd28 attached [2025-09-23 22:01:20.293] mtd32 attached [2025-09-23 22:01:20.309] mtd24 attached [2025-09-23 22:01:20.341] ubi0:animations is mounted. [2025-09-23 22:01:20.357] RTNETLINK answers: File exists [2025-09-23 22:01:20.357] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:01:20.413] ubi1:dml_code is mounted. [2025-09-23 22:01:20.413] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:01:20.413] ubi2:textures is mounted. [2025-09-23 22:01:20.413] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:01:20.413] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:01:20.413] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:01:20.413] data.LB_FadeInType0=100 [2025-09-23 22:01:20.413] data.CHLH_FadeInType0=0 [2025-09-23 22:01:20.413] data.WU_FadeInDelay=0 [2025-09-23 22:01:20.413] max_time_out=0 [2025-09-23 22:01:20.413] No splash screen [2025-09-23 22:01:20.413] stop dss Done [2025-09-23 22:01:20.444] /dev/mem opened. [2025-09-23 22:01:20.483] Memory mapped at address 0xffffb5fdd000. [2025-09-23 22:01:20.483] Read at address 0x00600018 (0xffffb5fdd018): 0x00000000 [2025-09-23 22:01:20.483] Write at address 0x00600018 (0xffffb5fdd018): 0x00400040, readback 0x00400040 [2025-09-23 22:01:20.483] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:01:20.483] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:01:20.690] Loaded PowerVR consumer services. [2025-09-23 22:01:20.722] Waiting data available... [2025-09-23 22:01:20.738] 512+0 records in [2025-09-23 22:01:20.738] 512+0 records out [2025-09-23 22:01:20.770] Starting syslogd/klogd: done [2025-09-23 22:01:20.786] DML Start [2025-09-23 22:01:20.962] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:01:21.170] DML res1: 0 [2025-09-23 22:01:21.624] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:01:21.624] Read Success [2025-09-23 22:01:21.624] Verifying certificate... [2025-09-23 22:01:21.895] Verified OK [2025-09-23 22:01:21.912] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:01:23.589] Verified OK [2025-09-23 22:01:23.589] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:01:24.225] Verified OK [2025-09-23 22:01:24.225] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:01:26.847] fs.protected_hardlinks = 1 [2025-09-23 22:01:26.847] fs.protected_symlinks = 1 [2025-09-23 22:01:26.863] kernel.modules_disabled = 1 [2025-09-23 22:01:27.070] [2025-09-23 22:01:27.070] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:01:28.305] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:01:36.003] SBL1:1210.0.1.0 [2025-09-23 22:01:36.035] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:01:37.618] SBL2:1210.0.1.0 [2025-09-23 22:01:37.650] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:01:37.746] j-A [2025-09-23 22:01:45.100] The R5 Autosar Classic is running [2025-09-23 22:01:45.124] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:01:45.124] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:01:45.731] INIT: version 2.96 booting [2025-09-23 22:01:45.843] INIT: Entering runlevel: 5 [2025-09-23 22:01:46.003] mtd28 attached [2025-09-23 22:01:46.003] mtd24 attached [2025-09-23 22:01:46.019] mtd32 attached [2025-09-23 22:01:46.067] RTNETLINK answers: File exists [2025-09-23 22:01:46.117] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:01:46.117] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:01:46.117] ubi0:animations is mounted. [2025-09-23 22:01:46.117] ubi2:dml_code is mounted. [2025-09-23 22:01:46.117] ubi1:textures is mounted. [2025-09-23 22:01:46.117] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:01:46.117] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:01:46.117] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:01:46.139] data.LB_FadeInType0=100 [2025-09-23 22:01:46.139] data.CHLH_FadeInType0=0 [2025-09-23 22:01:46.139] data.WU_FadeInDelay=0 [2025-09-23 22:01:46.139] max_time_out=0 [2025-09-23 22:01:46.139] No splash screen [2025-09-23 22:01:46.139] stop dss Done [2025-09-23 22:01:46.171] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:01:46.208] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:01:46.208] /dev/mem opened. [2025-09-23 22:01:46.208] Memory mapped at address 0xffff98b9a000. [2025-09-23 22:01:46.208] Read at address 0x00600018 (0xffff98b9a018): 0x00000000 [2025-09-23 22:01:46.208] Write at address 0x00600018 (0xffff98b9a018): 0x00400040, readback 0x00400040 [2025-09-23 22:01:46.335] Loaded PowerVR consumer services. [2025-09-23 22:01:46.431] 512+0 records in [2025-09-23 22:01:46.431] 512+0 records out [2025-09-23 22:01:46.463] Waiting data available... [2025-09-23 22:01:46.479] Starting syslogd/klogd: done [2025-09-23 22:01:46.496] DML Start [2025-09-23 22:01:46.639] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:01:46.815] DML res1: 0 [2025-09-23 22:01:47.451] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:01:47.451] Read Success [2025-09-23 22:01:47.451] Verifying certificate... [2025-09-23 22:01:47.658] Verified OK [2025-09-23 22:01:47.674] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:01:49.286] Verified OK [2025-09-23 22:01:49.286] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:01:49.878] Verified OK [2025-09-23 22:01:49.878] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:01:52.597] fs.protected_hardlinks = 1 [2025-09-23 22:01:52.612] fs.protected_symlinks = 1 [2025-09-23 22:01:52.612] kernel.modules_disabled = 1 [2025-09-23 22:01:52.804] [2025-09-23 22:01:52.804] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:01:54.011] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:02:01.722] SBL1:1210.0.1.0 [2025-09-23 22:02:01.770] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:02:03.337] SBL2:1210.0.1.0 [2025-09-23 22:02:03.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:02:03.481] j-A [2025-09-23 22:02:10.835] The R5 Autosar Classic is running [2025-09-23 22:02:10.857] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:02:10.857] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:02:11.465] INIT: version 2.96 booting [2025-09-23 22:02:11.576] INIT: Entering runlevel: 5 [2025-09-23 22:02:11.720] mtd28 attached [2025-09-23 22:02:11.736] mtd32 attached [2025-09-23 22:02:11.752] mtd24 attached [2025-09-23 22:02:11.784] ubi0:animations is mounted. [2025-09-23 22:02:11.799] ubi1:dml_code is mounted. [2025-09-23 22:02:11.799] RTNETLINK answers: File exists [2025-09-23 22:02:11.859] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:02:11.859] ubi2:textures is mounted. [2025-09-23 22:02:11.859] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:02:11.859] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:02:11.859] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:02:11.859] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:02:11.859] data.LB_FadeInType0=100 [2025-09-23 22:02:11.859] data.CHLH_FadeInType0=0 [2025-09-23 22:02:11.859] data.WU_FadeInDelay=0 [2025-09-23 22:02:11.859] max_time_out=0 [2025-09-23 22:02:11.859] No splash screen [2025-09-23 22:02:11.859] stop dss Done [2025-09-23 22:02:11.931] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:02:11.931] /dev/mem opened. [2025-09-23 22:02:11.931] Memory mapped at address 0xffff943cb000. [2025-09-23 22:02:11.931] Read at address 0x00600018 (0xffff943cb018): 0x00000000 [2025-09-23 22:02:11.931] Write at address 0x00600018 (0xffff943cb018): 0x00400040, readback 0x00400040 [2025-09-23 22:02:11.931] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:02:12.123] Loaded PowerVR consumer services. [2025-09-23 22:02:12.155] 512+0 records in [2025-09-23 22:02:12.155] 512+0 records out [2025-09-23 22:02:12.170] Waiting data available... [2025-09-23 22:02:12.186] Starting syslogd/klogd: done [2025-09-23 22:02:12.202] DML Start [2025-09-23 22:02:12.379] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:02:12.602] DML res1: 0 [2025-09-23 22:02:13.104] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:02:13.104] Read Success [2025-09-23 22:02:13.104] Verifying certificate... [2025-09-23 22:02:13.344] Verified OK [2025-09-23 22:02:13.360] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:02:15.078] Verified OK [2025-09-23 22:02:15.078] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:02:15.690] Verified OK [2025-09-23 22:02:15.690] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:02:18.296] fs.protected_hardlinks = 1 [2025-09-23 22:02:18.323] fs.protected_symlinks = 1 [2025-09-23 22:02:18.323] kernel.modules_disabled = 1 [2025-09-23 22:02:18.498] [2025-09-23 22:02:18.498] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:02:19.681] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:02:27.455] SBL1:1210.0.1.0 [2025-09-23 22:02:27.503] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:02:29.070] SBL2:1210.0.1.0 [2025-09-23 22:02:29.118] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:02:29.214] j-A [2025-09-23 22:02:36.570] The R5 Autosar Classic is running [2025-09-23 22:02:36.570] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:02:36.591] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:02:37.198] INIT: version 2.96 booting [2025-09-23 22:02:37.309] INIT: Entering runlevel: 5 [2025-09-23 22:02:37.470] mtd28 attached [2025-09-23 22:02:37.470] mtd24 attached [2025-09-23 22:02:37.486] mtd32 attached [2025-09-23 22:02:37.573] RTNETLINK answers: File exists [2025-09-23 22:02:37.573] ubi0:animations is mounted. [2025-09-23 22:02:37.573] ubi1:textures is mounted. [2025-09-23 22:02:37.573] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:02:37.573] ubi2:dml_code is mounted. [2025-09-23 22:02:37.573] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:02:37.573] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:02:37.573] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:02:37.573] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:02:37.596] data.LB_FadeInType0=100 [2025-09-23 22:02:37.596] data.CHLH_FadeInType0=0 [2025-09-23 22:02:37.596] data.WU_FadeInDelay=0 [2025-09-23 22:02:37.596] max_time_out=0 [2025-09-23 22:02:37.596] No splash screen [2025-09-23 22:02:37.596] stop dss Done [2025-09-23 22:02:37.627] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:02:37.643] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:02:37.677] /dev/mem opened. [2025-09-23 22:02:37.677] Memory mapped at address 0xffff9b5e9000. [2025-09-23 22:02:37.677] Read at address 0x00600018 (0xffff9b5e9018): 0x00000000 [2025-09-23 22:02:37.677] Write at address 0x00600018 (0xffff9b5e9018): 0x00400040, readback 0x00400040 [2025-09-23 22:02:37.869] Loaded PowerVR consumer services. [2025-09-23 22:02:37.885] Waiting data available... [2025-09-23 22:02:37.901] 512+0 records in [2025-09-23 22:02:37.901] 512+0 records out [2025-09-23 22:02:37.933] Starting syslogd/klogd: done [2025-09-23 22:02:37.949] DML Start [2025-09-23 22:02:38.141] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:02:38.365] DML res1: 0 [2025-09-23 22:02:38.793] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:02:38.793] Read Success [2025-09-23 22:02:38.793] Verifying certificate... [2025-09-23 22:02:39.033] Verified OK [2025-09-23 22:02:39.049] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:02:40.654] Verified OK [2025-09-23 22:02:40.654] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:02:41.284] Verified OK [2025-09-23 22:02:41.284] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:02:44.082] fs.protected_hardlinks = 1 [2025-09-23 22:02:44.082] fs.protected_symlinks = 1 [2025-09-23 22:02:44.098] kernel.modules_disabled = 1 [2025-09-23 22:02:44.289] [2025-09-23 22:02:44.289] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:02:45.453] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:02:53.211] SBL1:1210.0.1.0 [2025-09-23 22:02:53.243] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:02:54.825] SBL2:1210.0.1.0 [2025-09-23 22:02:54.857] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:02:54.969] j-A [2025-09-23 22:03:02.309] The R5 Autosar Classic is running [2025-09-23 22:03:02.334] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:03:02.334] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:03:02.941] INIT: version 2.96 booting [2025-09-23 22:03:03.069] INIT: Entering runlevel: 5 [2025-09-23 22:03:03.213] mtd24 attached [2025-09-23 22:03:03.230] mtd28 attached [2025-09-23 22:03:03.230] mtd32 attached [2025-09-23 22:03:03.278] ubi0:textures is mounted. [2025-09-23 22:03:03.294] RTNETLINK answers: File exists [2025-09-23 22:03:03.294] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:03:03.346] ubi2:dml_code is mounted. [2025-09-23 22:03:03.346] ubi1:animations is mounted. [2025-09-23 22:03:03.346] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:03:03.346] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:03:03.346] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:03:03.346] data.LB_FadeInType0=100 [2025-09-23 22:03:03.346] data.CHLH_FadeInType0=0 [2025-09-23 22:03:03.346] data.WU_FadeInDelay=0 [2025-09-23 22:03:03.346] max_time_out=0 [2025-09-23 22:03:03.346] No splash screen [2025-09-23 22:03:03.346] stop dss Done [2025-09-23 22:03:03.346] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:03:03.412] /dev/mem opened. [2025-09-23 22:03:03.412] Memory mapped at address 0xffff8f501000. [2025-09-23 22:03:03.412] Read at address 0x00600018 (0xffff8f501018): 0x00000000 [2025-09-23 22:03:03.412] Write at address 0x00600018 (0xffff8f501018): 0x00400040, readback 0x00400040 [2025-09-23 22:03:03.412] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:03:03.412] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:03:03.508] Loaded PowerVR consumer services. [2025-09-23 22:03:03.666] Waiting data available... [2025-09-23 22:03:03.666] 512+0 records in [2025-09-23 22:03:03.666] 512+0 records out [2025-09-23 22:03:03.698] Starting syslogd/klogd: done [2025-09-23 22:03:03.714] DML Start [2025-09-23 22:03:03.954] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:03:04.161] DML res1: 0 [2025-09-23 22:03:04.573] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:03:04.573] Read Success [2025-09-23 22:03:04.573] Verifying certificate... [2025-09-23 22:03:04.796] Verified OK [2025-09-23 22:03:04.812] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:03:06.389] Verified OK [2025-09-23 22:03:06.389] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:03:07.013] Verified OK [2025-09-23 22:03:07.013] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:03:09.730] fs.protected_hardlinks = 1 [2025-09-23 22:03:09.746] fs.protected_symlinks = 1 [2025-09-23 22:03:09.746] kernel.modules_disabled = 1 [2025-09-23 22:03:09.954] [2025-09-23 22:03:09.954] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:03:11.225] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:03:18.963] SBL1:1210.0.1.0 [2025-09-23 22:03:19.011] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:03:20.577] SBL2:1210.0.1.0 [2025-09-23 22:03:20.609] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:03:20.722] j-A [2025-09-23 22:03:28.077] The R5 Autosar Classic is running [2025-09-23 22:03:28.077] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:03:28.098] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:03:28.706] INIT: version 2.96 booting [2025-09-23 22:03:28.817] INIT: Entering runlevel: 5 [2025-09-23 22:03:28.962] mtd28 attached [2025-09-23 22:03:28.978] mtd24 attached [2025-09-23 22:03:28.994] mtd32 attached [2025-09-23 22:03:29.010] ubi0:animations is mounted. [2025-09-23 22:03:29.026] ubi1:textures is mounted. [2025-09-23 22:03:29.041] RTNETLINK answers: File exists [2025-09-23 22:03:29.041] ubi2:dml_code is mounted. [2025-09-23 22:03:29.058] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:03:29.058] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:03:29.099] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:03:29.099] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:03:29.099] data.LB_FadeInType0=100 [2025-09-23 22:03:29.099] data.CHLH_FadeInType0=0 [2025-09-23 22:03:29.099] data.WU_FadeInDelay=0 [2025-09-23 22:03:29.099] max_time_out=0 [2025-09-23 22:03:29.099] No splash screen [2025-09-23 22:03:29.099] stop dss Done [2025-09-23 22:03:29.099] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:03:29.148] /dev/mem opened. [2025-09-23 22:03:29.148] Memory mapped at address 0xffffb9764000. [2025-09-23 22:03:29.173] Read at address 0x00600018 (0xffffb9764018): 0x00000000 [2025-09-23 22:03:29.173] Write at address 0x00600018 (0xffffb9764018): 0x00400040, readback 0x00400040 [2025-09-23 22:03:29.189] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:03:29.205] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:03:29.286] Loaded PowerVR consumer services. [2025-09-23 22:03:29.397] 512+0 records in [2025-09-23 22:03:29.397] 512+0 records out [2025-09-23 22:03:29.413] Waiting data available... [2025-09-23 22:03:29.445] Starting syslogd/klogd: done [2025-09-23 22:03:29.461] DML Start [2025-09-23 22:03:29.654] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:03:29.845] DML res1: 0 [2025-09-23 22:03:30.319] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:03:30.319] Read Success [2025-09-23 22:03:30.319] Verifying certificate... [2025-09-23 22:03:30.591] Verified OK [2025-09-23 22:03:30.607] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:03:32.253] Verified OK [2025-09-23 22:03:32.274] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:03:32.873] Verified OK [2025-09-23 22:03:32.873] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:03:35.383] fs.protected_hardlinks = 1 [2025-09-23 22:03:35.399] fs.protected_symlinks = 1 [2025-09-23 22:03:35.399] kernel.modules_disabled = 1 [2025-09-23 22:03:35.607] [2025-09-23 22:03:35.607] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:03:36.977] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:03:44.716] SBL1:1210.0.1.0 [2025-09-23 22:03:44.748] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:03:46.331] SBL2:1210.0.1.0 [2025-09-23 22:03:46.363] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:03:46.459] j-A [2025-09-23 22:03:53.814] The R5 Autosar Classic is running [2025-09-23 22:03:53.838] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:03:53.838] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:03:54.446] INIT: version 2.96 booting [2025-09-23 22:03:54.559] INIT: Entering runlevel: 5 [2025-09-23 22:03:54.718] mtd32 attached [2025-09-23 22:03:54.718] mtd28 attached [2025-09-23 22:03:54.734] mtd24 attached [2025-09-23 22:03:54.750] ubi0:dml_code is mounted. [2025-09-23 22:03:54.782] RTNETLINK answers: File exists [2025-09-23 22:03:54.782] ubi1:animations is mounted. [2025-09-23 22:03:54.845] ubi2:textures is mounted. [2025-09-23 22:03:54.845] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:03:54.845] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:03:54.845] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:03:54.845] data.LB_FadeInType0=100 [2025-09-23 22:03:54.845] data.CHLH_FadeInType0=0 [2025-09-23 22:03:54.845] data.WU_FadeInDelay=0 [2025-09-23 22:03:54.845] max_time_out=0 [2025-09-23 22:03:54.845] No splash screen [2025-09-23 22:03:54.845] stop dss Done [2025-09-23 22:03:54.845] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:03:54.845] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:03:54.899] /dev/mem opened. [2025-09-23 22:03:54.899] Memory mapped at address 0xffffa4b6b000. [2025-09-23 22:03:54.899] Read at address 0x00600018 (0xffffa4b6b018): 0x00000000 [2025-09-23 22:03:54.899] Write at address 0x00600018 (0xffffa4b6b018): 0x00400040, readback 0x00400040 [2025-09-23 22:03:54.899] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:03:54.915] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:03:55.059] Loaded PowerVR consumer services. [2025-09-23 22:03:55.163] 512+0 records in [2025-09-23 22:03:55.163] 512+0 records out [2025-09-23 22:03:55.163] Waiting data available... [2025-09-23 22:03:55.179] Starting syslogd/klogd: done [2025-09-23 22:03:55.195] DML Start [2025-09-23 22:03:55.386] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:03:55.643] DML res1: 0 [2025-09-23 22:03:56.101] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:03:56.101] Read Success [2025-09-23 22:03:56.101] Verifying certificate... [2025-09-23 22:03:56.356] Verified OK [2025-09-23 22:03:56.372] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:03:58.060] Verified OK [2025-09-23 22:03:58.060] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:03:58.601] Verified OK [2025-09-23 22:03:58.601] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:04:01.079] fs.protected_hardlinks = 1 [2025-09-23 22:04:01.079] fs.protected_symlinks = 1 [2025-09-23 22:04:01.095] kernel.modules_disabled = 1 [2025-09-23 22:04:01.304] [2025-09-23 22:04:01.304] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:04:02.705] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:04:10.434] SBL1:1210.0.1.0 [2025-09-23 22:04:10.482] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:04:12.049] SBL2:1210.0.1.0 [2025-09-23 22:04:12.097] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:04:12.192] j-A [2025-09-23 22:04:19.546] The R5 Autosar Classic is running [2025-09-23 22:04:19.546] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:04:19.567] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:04:20.176] INIT: version 2.96 booting [2025-09-23 22:04:20.287] INIT: Entering runlevel: 5 [2025-09-23 22:04:20.447] mtd24 attached [2025-09-23 22:04:20.463] mtd32 attached [2025-09-23 22:04:20.463] mtd28 attached [2025-09-23 22:04:20.511] ubi0:textures is mounted. [2025-09-23 22:04:20.511] RTNETLINK answers: File exists [2025-09-23 22:04:20.571] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:04:20.571] ubi2:animations is mounted. [2025-09-23 22:04:20.571] ubi1:dml_code is mounted. [2025-09-23 22:04:20.571] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:04:20.571] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:04:20.571] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:04:20.571] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:04:20.571] data.LB_FadeInType0=100 [2025-09-23 22:04:20.571] data.CHLH_FadeInType0=0 [2025-09-23 22:04:20.571] data.WU_FadeInDelay=0 [2025-09-23 22:04:20.571] max_time_out=0 [2025-09-23 22:04:20.571] No splash screen [2025-09-23 22:04:20.571] stop dss Done [2025-09-23 22:04:20.619] /dev/mem opened. [2025-09-23 22:04:20.619] Memory mapped at address 0xffffac6b6000. [2025-09-23 22:04:20.645] Read at address 0x00600018 (0xffffac6b6018): 0x00000000 [2025-09-23 22:04:20.645] Write at address 0x00600018 (0xffffac6b6018): 0x00400040, readback 0x00400040 [2025-09-23 22:04:20.661] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:04:20.677] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:04:20.853] Loaded PowerVR consumer services. [2025-09-23 22:04:20.869] 512+0 records in [2025-09-23 22:04:20.869] 512+0 records out [2025-09-23 22:04:20.901] Waiting data available... [2025-09-23 22:04:20.917] Starting syslogd/klogd: done [2025-09-23 22:04:20.933] DML Start [2025-09-23 22:04:21.092] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:04:21.284] DML res1: 0 [2025-09-23 22:04:21.779] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:04:21.779] Read Success [2025-09-23 22:04:21.779] Verifying certificate... [2025-09-23 22:04:22.019] Verified OK [2025-09-23 22:04:22.035] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:04:23.885] Verified OK [2025-09-23 22:04:23.885] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:04:24.472] Verified OK [2025-09-23 22:04:24.472] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:04:26.967] fs.protected_hardlinks = 1 [2025-09-23 22:04:26.997] fs.protected_symlinks = 1 [2025-09-23 22:04:26.997] kernel.modules_disabled = 1 [2025-09-23 22:04:27.189] [2025-09-23 22:04:27.189] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:04:28.414] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:04:36.195] SBL1:1210.0.1.0 [2025-09-23 22:04:36.227] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:04:37.810] SBL2:1210.0.1.0 [2025-09-23 22:04:37.841] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:04:37.953] j-A [2025-09-23 22:04:45.323] The R5 Autosar Classic is running [2025-09-23 22:04:45.323] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:04:45.323] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:04:45.930] INIT: version 2.96 booting [2025-09-23 22:04:46.042] INIT: Entering runlevel: 5 [2025-09-23 22:04:46.202] mtd24 attached [2025-09-23 22:04:46.202] mtd28 attached [2025-09-23 22:04:46.234] mtd32 attached [2025-09-23 22:04:46.250] ubi0:textures is mounted. [2025-09-23 22:04:46.266] RTNETLINK answers: File exists [2025-09-23 22:04:46.311] ubi1:animations is mounted. [2025-09-23 22:04:46.311] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:04:46.311] ubi2:dml_code is mounted. [2025-09-23 22:04:46.311] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:04:46.311] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:04:46.311] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:04:46.311] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:04:46.311] data.LB_FadeInType0=100 [2025-09-23 22:04:46.311] data.CHLH_FadeInType0=0 [2025-09-23 22:04:46.311] data.WU_FadeInDelay=0 [2025-09-23 22:04:46.332] max_time_out=0 [2025-09-23 22:04:46.332] No splash screen [2025-09-23 22:04:46.332] stop dss Done [2025-09-23 22:04:46.364] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:04:46.403] /dev/mem opened. [2025-09-23 22:04:46.403] Memory mapped at address 0xffff942b3000. [2025-09-23 22:04:46.403] Read at address 0x00600018 (0xffff942b3018): 0x00000000 [2025-09-23 22:04:46.403] Write at address 0x00600018 (0xffff942b3018): 0x00400040, readback 0x00400040 [2025-09-23 22:04:46.403] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:04:46.595] Loaded PowerVR consumer services. [2025-09-23 22:04:46.627] 512+0 records in [2025-09-23 22:04:46.627] 512+0 records out [2025-09-23 22:04:46.658] Starting syslogd/klogd: done [2025-09-23 22:04:46.706] Waiting data available... [2025-09-23 22:04:46.706] DML Start [2025-09-23 22:04:46.899] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:04:47.107] DML res1: 0 [2025-09-23 22:04:47.535] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:04:47.535] Read Success [2025-09-23 22:04:47.535] Verifying certificate... [2025-09-23 22:04:47.806] Verified OK [2025-09-23 22:04:47.822] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:04:49.582] Verified OK [2025-09-23 22:04:49.582] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:04:50.165] Verified OK [2025-09-23 22:04:50.165] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:04:52.708] fs.protected_hardlinks = 1 [2025-09-23 22:04:52.708] fs.protected_symlinks = 1 [2025-09-23 22:04:52.724] kernel.modules_disabled = 1 [2025-09-23 22:04:52.932] [2025-09-23 22:04:52.932] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:04:54.185] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:05:01.927] SBL1:1210.0.1.0 [2025-09-23 22:05:01.975] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:05:03.542] SBL2:1210.0.1.0 [2025-09-23 22:05:03.574] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:05:03.685] j-A [2025-09-23 22:05:11.039] The R5 Autosar Classic is running [2025-09-23 22:05:11.039] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:05:11.060] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:05:11.668] INIT: version 2.96 booting [2025-09-23 22:05:11.779] INIT: Entering runlevel: 5 [2025-09-23 22:05:11.940] mtd24 attached [2025-09-23 22:05:11.940] mtd28 attached [2025-09-23 22:05:11.956] mtd32 attached [2025-09-23 22:05:12.004] ubi0:textures is mounted. [2025-09-23 22:05:12.004] RTNETLINK answers: File exists [2025-09-23 22:05:12.071] ubi2:dml_code is mounted. [2025-09-23 22:05:12.071] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:05:12.071] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:05:12.071] ubi1:animations is mounted. [2025-09-23 22:05:12.071] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:05:12.071] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:05:12.072] data.LB_FadeInType0=100 [2025-09-23 22:05:12.072] data.CHLH_FadeInType0=0 [2025-09-23 22:05:12.072] data.WU_FadeInDelay=0 [2025-09-23 22:05:12.072] max_time_out=0 [2025-09-23 22:05:12.072] No splash screen [2025-09-23 22:05:12.072] stop dss Done [2025-09-23 22:05:12.072] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:05:12.103] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:05:12.103] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:05:12.156] /dev/mem opened. [2025-09-23 22:05:12.156] Memory mapped at address 0xffff951b5000. [2025-09-23 22:05:12.156] Read at address 0x00600018 (0xffff951b5018): 0x00000000 [2025-09-23 22:05:12.156] Write at address 0x00600018 (0xffff951b5018): 0x00400040, readback 0x00400040 [2025-09-23 22:05:12.283] Loaded PowerVR consumer services. [2025-09-23 22:05:12.410] Waiting data available... [2025-09-23 22:05:12.410] 512+0 records in [2025-09-23 22:05:12.410] 512+0 records out [2025-09-23 22:05:12.442] Starting syslogd/klogd: done [2025-09-23 22:05:12.458] DML Start [2025-09-23 22:05:12.617] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:05:12.825] DML res1: 0 [2025-09-23 22:05:13.366] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:05:13.366] Read Success [2025-09-23 22:05:13.366] Verifying certificate... [2025-09-23 22:05:13.638] Verified OK [2025-09-23 22:05:13.670] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:05:15.397] Verified OK [2025-09-23 22:05:15.412] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:05:15.935] Verified OK [2025-09-23 22:05:15.935] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:05:18.270] fs.protected_hardlinks = 1 [2025-09-23 22:05:18.286] fs.protected_symlinks = 1 [2025-09-23 22:05:18.286] kernel.modules_disabled = 1 [2025-09-23 22:05:18.478] [2025-09-23 22:05:18.478] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:05:19.945] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:05:27.669] SBL1:1210.0.1.0 [2025-09-23 22:05:27.701] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:05:29.283] SBL2:1210.0.1.0 [2025-09-23 22:05:29.315] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:05:29.428] j-A [2025-09-23 22:05:36.765] The R5 Autosar Classic is running [2025-09-23 22:05:36.790] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:05:36.790] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:05:37.398] INIT: version 2.96 booting [2025-09-23 22:05:37.509] INIT: Entering runlevel: 5 [2025-09-23 22:05:37.670] mtd28 attached [2025-09-23 22:05:37.686] mtd32 attached [2025-09-23 22:05:37.686] mtd24 attached [2025-09-23 22:05:37.702] ubi0:animations is mounted. [2025-09-23 22:05:37.734] RTNETLINK answers: File exists [2025-09-23 22:05:37.773] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:05:37.773] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:05:37.773] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:05:37.773] ubi2:textures is mounted. [2025-09-23 22:05:37.773] ubi1:dml_code is mounted. [2025-09-23 22:05:37.773] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:05:37.773] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:05:37.799] data.LB_FadeInType0=100 [2025-09-23 22:05:37.799] data.CHLH_FadeInType0=0 [2025-09-23 22:05:37.799] data.WU_FadeInDelay=0 [2025-09-23 22:05:37.799] max_time_out=0 [2025-09-23 22:05:37.799] No splash screen [2025-09-23 22:05:37.799] stop dss Done [2025-09-23 22:05:37.826] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:05:37.826] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:05:37.874] /dev/mem opened. [2025-09-23 22:05:37.874] Memory mapped at address 0xffff89c5a000. [2025-09-23 22:05:37.874] Read at address 0x00600018 (0xffff89c5a018): 0x00000000 [2025-09-23 22:05:37.874] Write at address 0x00600018 (0xffff89c5a018): 0x00400040, readback 0x00400040 [2025-09-23 22:05:37.986] Loaded PowerVR consumer services. [2025-09-23 22:05:38.099] Waiting data available... [2025-09-23 22:05:38.099] 512+0 records in [2025-09-23 22:05:38.114] 512+0 records out [2025-09-23 22:05:38.146] Starting syslogd/klogd: done [2025-09-23 22:05:38.162] DML Start [2025-09-23 22:05:38.370] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:05:38.577] DML res1: 0 [2025-09-23 22:05:39.005] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:05:39.005] Read Success [2025-09-23 22:05:39.005] Verifying certificate... [2025-09-23 22:05:39.294] Verified OK [2025-09-23 22:05:39.309] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:05:41.079] Verified OK [2025-09-23 22:05:41.079] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:05:41.697] Verified OK [2025-09-23 22:05:41.697] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:05:44.238] fs.protected_hardlinks = 1 [2025-09-23 22:05:44.238] fs.protected_symlinks = 1 [2025-09-23 22:05:44.254] kernel.modules_disabled = 1 [2025-09-23 22:05:44.430] [2025-09-23 22:05:44.430] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:05:45.685] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:05:53.418] SBL1:1210.0.1.0 [2025-09-23 22:05:53.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:05:55.032] SBL2:1210.0.1.0 [2025-09-23 22:05:55.064] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:05:55.176] j-A [2025-09-23 22:06:02.550] The R5 Autosar Classic is running [2025-09-23 22:06:02.550] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:06:02.550] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:06:03.158] INIT: version 2.96 booting [2025-09-23 22:06:03.269] INIT: Entering runlevel: 5 [2025-09-23 22:06:03.430] mtd24 attached [2025-09-23 22:06:03.430] mtd28 attached [2025-09-23 22:06:03.446] mtd32 attached [2025-09-23 22:06:03.494] RTNETLINK answers: File exists [2025-09-23 22:06:03.560] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:06:03.560] ubi2:dml_code is mounted. [2025-09-23 22:06:03.560] ubi1:animations is mounted. [2025-09-23 22:06:03.560] ubi0:textures is mounted. [2025-09-23 22:06:03.560] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:06:03.560] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:06:03.560] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:06:03.560] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:06:03.560] data.LB_FadeInType0=100 [2025-09-23 22:06:03.560] data.CHLH_FadeInType0=0 [2025-09-23 22:06:03.560] data.WU_FadeInDelay=0 [2025-09-23 22:06:03.560] max_time_out=0 [2025-09-23 22:06:03.560] No splash screen [2025-09-23 22:06:03.560] stop dss Done [2025-09-23 22:06:03.592] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:06:03.631] /dev/mem opened. [2025-09-23 22:06:03.631] Memory mapped at address 0xffffaff92000. [2025-09-23 22:06:03.631] Read at address 0x00600018 (0xffffaff92018): 0x00000000 [2025-09-23 22:06:03.631] Write at address 0x00600018 (0xffffaff92018): 0x00400040, readback 0x00400040 [2025-09-23 22:06:03.631] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:06:03.822] Loaded PowerVR consumer services. [2025-09-23 22:06:03.870] 512+0 records in [2025-09-23 22:06:03.870] 512+0 records out [2025-09-23 22:06:03.902] Waiting data available... [2025-09-23 22:06:03.918] Starting syslogd/klogd: done [2025-09-23 22:06:03.934] DML Start [2025-09-23 22:06:04.110] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:06:04.335] DML res1: 0 [2025-09-23 22:06:04.763] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:06:04.763] Read Success [2025-09-23 22:06:04.763] Verifying certificate... [2025-09-23 22:06:04.988] Verified OK [2025-09-23 22:06:05.004] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:06:06.666] Verified OK [2025-09-23 22:06:06.666] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:06:07.267] Verified OK [2025-09-23 22:06:07.267] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:06:09.793] fs.protected_hardlinks = 1 [2025-09-23 22:06:09.793] fs.protected_symlinks = 1 [2025-09-23 22:06:09.809] kernel.modules_disabled = 1 [2025-09-23 22:06:10.001] [2025-09-23 22:06:10.001] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:06:11.454] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:06:19.188] SBL1:1210.0.1.0 [2025-09-23 22:06:19.220] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:06:20.802] SBL2:1210.0.1.0 [2025-09-23 22:06:20.834] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:06:20.946] j-A [2025-09-23 22:06:28.317] The R5 Autosar Classic is running [2025-09-23 22:06:28.317] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:06:28.317] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:06:28.924] INIT: version 2.96 booting [2025-09-23 22:06:29.036] INIT: Entering runlevel: 5 [2025-09-23 22:06:29.196] mtd24 attached [2025-09-23 22:06:29.196] mtd28 attached [2025-09-23 22:06:29.212] mtd32 attached [2025-09-23 22:06:29.260] RTNETLINK answers: File exists [2025-09-23 22:06:29.321] ubi2:dml_code is mounted. [2025-09-23 22:06:29.321] ubi0:textures is mounted. [2025-09-23 22:06:29.321] ubi1:animations is mounted. [2025-09-23 22:06:29.321] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:06:29.321] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:06:29.321] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:06:29.321] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:06:29.321] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:06:29.321] data.LB_FadeInType0=100 [2025-09-23 22:06:29.321] data.CHLH_FadeInType0=0 [2025-09-23 22:06:29.321] data.WU_FadeInDelay=0 [2025-09-23 22:06:29.321] max_time_out=0 [2025-09-23 22:06:29.321] No splash screen [2025-09-23 22:06:29.321] stop dss Done [2025-09-23 22:06:29.352] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:06:29.392] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:06:29.392] /dev/mem opened. [2025-09-23 22:06:29.392] Memory mapped at address 0xffffae8eb000. [2025-09-23 22:06:29.392] Read at address 0x00600018 (0xffffae8eb018): 0x00000000 [2025-09-23 22:06:29.392] Write at address 0x00600018 (0xffffae8eb018): 0x00400040, readback 0x00400040 [2025-09-23 22:06:29.489] Loaded PowerVR consumer services. [2025-09-23 22:06:29.642] 512+0 records in [2025-09-23 22:06:29.642] 512+0 records out [2025-09-23 22:06:29.642] Waiting data available... [2025-09-23 22:06:29.658] Starting syslogd/klogd: done [2025-09-23 22:06:29.674] DML Start [2025-09-23 22:06:29.803] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:06:30.042] DML res1: 0 [2025-09-23 22:06:30.506] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:06:30.506] Read Success [2025-09-23 22:06:30.522] Verifying certificate... [2025-09-23 22:06:30.762] Verified OK [2025-09-23 22:06:30.778] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:06:32.370] Verified OK [2025-09-23 22:06:32.370] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:06:33.025] Verified OK [2025-09-23 22:06:33.025] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:06:35.710] fs.protected_hardlinks = 1 [2025-09-23 22:06:35.710] fs.protected_symlinks = 1 [2025-09-23 22:06:35.726] kernel.modules_disabled = 1 [2025-09-23 22:06:35.918] [2025-09-23 22:06:35.918] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:06:37.181] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:06:44.924] SBL1:1210.0.1.0 [2025-09-23 22:06:44.972] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:06:46.539] SBL2:1210.0.1.0 [2025-09-23 22:06:46.571] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:06:46.682] j-A [2025-09-23 22:06:54.057] The R5 Autosar Classic is running [2025-09-23 22:06:54.057] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:06:54.057] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:06:54.665] INIT: version 2.96 booting [2025-09-23 22:06:54.778] INIT: Entering runlevel: 5 [2025-09-23 22:06:54.921] mtd24 attached [2025-09-23 22:06:54.937] mtd28 attached [2025-09-23 22:06:54.999] ubi0:textures is mounted. [2025-09-23 22:06:54.999] ubi1:animations is mounted. [2025-09-23 22:06:54.999] mtd32 attached [2025-09-23 22:06:54.999] RTNETLINK answers: File exists [2025-09-23 22:06:55.042] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:06:55.042] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:06:55.042] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:06:55.042] ubi2:dml_code is mounted. [2025-09-23 22:06:55.042] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:06:55.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:06:55.064] data.LB_FadeInType0=100 [2025-09-23 22:06:55.064] data.CHLH_FadeInType0=0 [2025-09-23 22:06:55.064] data.WU_FadeInDelay=0 [2025-09-23 22:06:55.064] max_time_out=0 [2025-09-23 22:06:55.064] No splash screen [2025-09-23 22:06:55.064] stop dss Done [2025-09-23 22:06:55.108] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:06:55.108] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:06:55.108] /dev/mem opened. [2025-09-23 22:06:55.140] Memory mapped at address 0xffffa626b000. [2025-09-23 22:06:55.140] Read at address 0x00600018 (0xffffa626b018): 0x00000000 [2025-09-23 22:06:55.140] Write at address 0x00600018 (0xffffa626b018): 0x00400040, readback 0x00400040 [2025-09-23 22:06:55.204] Loaded PowerVR consumer services. [2025-09-23 22:06:55.363] 512+0 records in [2025-09-23 22:06:55.363] 512+0 records out [2025-09-23 22:06:55.379] Starting syslogd/klogd: Waiting data available... [2025-09-23 22:06:55.412] done [2025-09-23 22:06:55.412] DML Start [2025-09-23 22:06:55.603] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:06:55.828] DML res1: 0 [2025-09-23 22:06:56.257] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:06:56.257] Read Success [2025-09-23 22:06:56.257] Verifying certificate... [2025-09-23 22:06:56.512] Verified OK [2025-09-23 22:06:56.529] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:06:58.215] Verified OK [2025-09-23 22:06:58.215] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:06:58.788] Verified OK [2025-09-23 22:06:58.788] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:07:01.499] fs.protected_hardlinks = 1 [2025-09-23 22:07:01.499] fs.protected_symlinks = 1 [2025-09-23 22:07:01.499] kernel.modules_disabled = 1 [2025-09-23 22:07:01.675] [2025-09-23 22:07:01.675] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:07:02.922] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:07:10.679] SBL1:1210.0.1.0 [2025-09-23 22:07:10.727] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:07:12.294] SBL2:1210.0.1.0 [2025-09-23 22:07:12.325] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:07:12.437] j-A [2025-09-23 22:07:19.813] The R5 Autosar Classic is running [2025-09-23 22:07:19.813] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:07:19.813] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:07:20.404] INIT: version 2.96 booting [2025-09-23 22:07:20.515] INIT: Entering runlevel: 5 [2025-09-23 22:07:20.676] mtd28 attached [2025-09-23 22:07:20.692] mtd24 attached [2025-09-23 22:07:20.708] mtd32 attached [2025-09-23 22:07:20.809] ubi0:animations is mounted. [2025-09-23 22:07:20.809] RTNETLINK answers: File exists [2025-09-23 22:07:20.809] ubi1:textures is mounted. [2025-09-23 22:07:20.809] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:07:20.809] ubi2:dml_code is mounted. [2025-09-23 22:07:20.809] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:07:20.809] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:07:20.809] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:07:20.809] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:07:20.809] data.LB_FadeInType0=100 [2025-09-23 22:07:20.809] data.CHLH_FadeInType0=0 [2025-09-23 22:07:20.809] data.WU_FadeInDelay=0 [2025-09-23 22:07:20.809] max_time_out=0 [2025-09-23 22:07:20.809] No splash screen [2025-09-23 22:07:20.809] stop dss Done [2025-09-23 22:07:20.854] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:07:20.854] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:07:20.888] /dev/mem opened. [2025-09-23 22:07:20.888] Memory mapped at address 0xffffa159a000. [2025-09-23 22:07:20.888] Read at address 0x00600018 (0xffffa159a018): 0x00000000 [2025-09-23 22:07:20.888] Write at address 0x00600018 (0xffffa159a018): 0x00400040, readback 0x00400040 [2025-09-23 22:07:21.096] Loaded PowerVR consumer services. [2025-09-23 22:07:21.128] Waiting data available... [2025-09-23 22:07:21.144] 512+0 records in [2025-09-23 22:07:21.144] 512+0 records out [2025-09-23 22:07:21.192] Starting syslogd/klogd: done [2025-09-23 22:07:21.208] DML Start [2025-09-23 22:07:21.368] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:07:21.544] DML res1: 0 [2025-09-23 22:07:22.111] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:07:22.111] Read Success [2025-09-23 22:07:22.111] Verifying certificate... [2025-09-23 22:07:22.383] Verified OK [2025-09-23 22:07:22.398] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:07:24.218] Verified OK [2025-09-23 22:07:24.218] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:07:24.692] Verified OK [2025-09-23 22:07:24.692] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:07:27.058] fs.protected_hardlinks = 1 [2025-09-23 22:07:27.090] fs.protected_symlinks = 1 [2025-09-23 22:07:27.090] kernel.modules_disabled = 1 [2025-09-23 22:07:27.266] [2025-09-23 22:07:27.266] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:07:28.705] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:07:36.450] SBL1:1210.0.1.0 [2025-09-23 22:07:36.482] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:07:38.065] SBL2:1210.0.1.0 [2025-09-23 22:07:38.097] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:07:38.208] j-A [2025-09-23 22:07:45.549] The R5 Autosar Classic is running [2025-09-23 22:07:45.574] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:07:45.574] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:07:46.181] INIT: version 2.96 booting [2025-09-23 22:07:46.294] INIT: Entering runlevel: 5 [2025-09-23 22:07:46.453] mtd32 attached [2025-09-23 22:07:46.469] mtd24 attached [2025-09-23 22:07:46.469] mtd28 attached [2025-09-23 22:07:46.517] RTNETLINK answers: File exists [2025-09-23 22:07:46.590] ubi0:dml_code is mounted. [2025-09-23 22:07:46.590] ubi1:textures is mounted. [2025-09-23 22:07:46.590] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:07:46.590] ubi2:animations is mounted. [2025-09-23 22:07:46.590] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:07:46.590] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:07:46.590] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:07:46.590] data.LB_FadeInType0=100 [2025-09-23 22:07:46.590] data.CHLH_FadeInType0=0 [2025-09-23 22:07:46.590] data.WU_FadeInDelay=0 [2025-09-23 22:07:46.590] max_time_out=0 [2025-09-23 22:07:46.590] No splash screen [2025-09-23 22:07:46.590] stop dss Done [2025-09-23 22:07:46.590] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:07:46.645] /dev/mem opened. [2025-09-23 22:07:46.645] Memory mapped at address 0xffffa7b11000. [2025-09-23 22:07:46.645] Read at address 0x00600018 (0xffffa7b11018): 0x00000000 [2025-09-23 22:07:46.645] Write at address 0x00600018 (0xffffa7b11018): 0x00400040, readback 0x00400040 [2025-09-23 22:07:46.661] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:07:46.677] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:07:46.821] Loaded PowerVR consumer services. [2025-09-23 22:07:46.901] 512+0 records in [2025-09-23 22:07:46.901] 512+0 records out [2025-09-23 22:07:46.917] Waiting data available... [2025-09-23 22:07:46.949] Starting syslogd/klogd: done [2025-09-23 22:07:46.981] DML Start [2025-09-23 22:07:47.173] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:07:47.397] DML res1: 0 [2025-09-23 22:07:47.833] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:07:47.833] Read Success [2025-09-23 22:07:47.833] Verifying certificate... [2025-09-23 22:07:48.105] Verified OK [2025-09-23 22:07:48.121] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:07:49.782] Verified OK [2025-09-23 22:07:49.782] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:07:50.434] Verified OK [2025-09-23 22:07:50.434] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:07:53.024] fs.protected_hardlinks = 1 [2025-09-23 22:07:53.024] fs.protected_symlinks = 1 [2025-09-23 22:07:53.040] kernel.modules_disabled = 1 [2025-09-23 22:07:53.248] [2025-09-23 22:07:53.248] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:07:54.462] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:08:02.194] SBL1:1210.0.1.0 [2025-09-23 22:08:02.226] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:08:03.809] SBL2:1210.0.1.0 [2025-09-23 22:08:03.841] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:08:03.952] j-A [2025-09-23 22:08:11.292] The R5 Autosar Classic is running [2025-09-23 22:08:11.323] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:08:11.323] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:08:11.931] INIT: version 2.96 booting [2025-09-23 22:08:12.042] INIT: Entering runlevel: 5 [2025-09-23 22:08:12.187] mtd24 attached [2025-09-23 22:08:12.203] mtd28 attached [2025-09-23 22:08:12.219] mtd32 attached [2025-09-23 22:08:12.267] ubi0:textures is mounted. [2025-09-23 22:08:12.267] RTNETLINK answers: File exists [2025-09-23 22:08:12.300] ubi1:animations is mounted. [2025-09-23 22:08:12.300] ubi2:dml_code is mounted. [2025-09-23 22:08:12.300] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:08:12.300] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:08:12.300] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:08:12.331] data.LB_FadeInType0=100 [2025-09-23 22:08:12.331] data.CHLH_FadeInType0=0 [2025-09-23 22:08:12.332] data.WU_FadeInDelay=0 [2025-09-23 22:08:12.332] max_time_out=0 [2025-09-23 22:08:12.332] No splash screen [2025-09-23 22:08:12.332] stop dss Done [2025-09-23 22:08:12.332] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:08:12.332] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:08:12.420] /dev/mem opened. [2025-09-23 22:08:12.420] Memory mapped at address 0xffff80000000. [2025-09-23 22:08:12.420] Read at address 0x00600018 (0xffff80000018): 0x00000000 [2025-09-23 22:08:12.420] Write at address 0x00600018 (0xffff80000018): 0x00400040, readback 0x00400040 [2025-09-23 22:08:12.420] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:08:12.420] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:08:12.485] Loaded PowerVR consumer services. [2025-09-23 22:08:12.640] 512+0 records in [2025-09-23 22:08:12.640] 512+0 records out [2025-09-23 22:08:12.640] Waiting data available... [2025-09-23 22:08:12.672] Starting syslogd/klogd: done [2025-09-23 22:08:12.688] DML Start [2025-09-23 22:08:12.880] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:08:13.088] DML res1: 0 [2025-09-23 22:08:13.520] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:08:13.541] Read Success [2025-09-23 22:08:13.541] Verifying certificate... [2025-09-23 22:08:13.813] Verified OK [2025-09-23 22:08:13.829] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:08:15.442] Verified OK [2025-09-23 22:08:15.442] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:08:15.994] Verified OK [2025-09-23 22:08:15.994] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:08:18.504] fs.protected_hardlinks = 1 [2025-09-23 22:08:18.504] fs.protected_symlinks = 1 [2025-09-23 22:08:18.520] kernel.modules_disabled = 1 [2025-09-23 22:08:18.712] [2025-09-23 22:08:18.712] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:08:20.204] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:08:27.955] SBL1:1210.0.1.0 [2025-09-23 22:08:27.987] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:08:29.570] SBL2:1210.0.1.0 [2025-09-23 22:08:29.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:08:29.713] j-A [2025-09-23 22:08:37.084] The R5 Autosar Classic is running [2025-09-23 22:08:37.084] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:08:37.084] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:08:37.691] INIT: version 2.96 booting [2025-09-23 22:08:37.803] INIT: Entering runlevel: 5 [2025-09-23 22:08:37.963] mtd28 attached [2025-09-23 22:08:37.963] mtd24 attached [2025-09-23 22:08:37.979] mtd32 attached [2025-09-23 22:08:38.085] RTNETLINK answers: File exists [2025-09-23 22:08:38.085] ubi1:textures is mounted. [2025-09-23 22:08:38.085] ubi0:animations is mounted. [2025-09-23 22:08:38.085] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:08:38.085] ubi2:dml_code is mounted. [2025-09-23 22:08:38.085] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:08:38.085] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:08:38.085] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:08:38.085] data.LB_FadeInType0=100 [2025-09-23 22:08:38.085] data.CHLH_FadeInType0=0 [2025-09-23 22:08:38.085] data.WU_FadeInDelay=0 [2025-09-23 22:08:38.085] max_time_out=0 [2025-09-23 22:08:38.085] No splash screen [2025-09-23 22:08:38.085] stop dss Done [2025-09-23 22:08:38.085] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:08:38.157] /dev/mem opened. [2025-09-23 22:08:38.157] Memory mapped at address 0xffff867dc000. [2025-09-23 22:08:38.157] Read at address 0x00600018 (0xffff867dc018): 0x00000000 [2025-09-23 22:08:38.157] Write at address 0x00600018 (0xffff867dc018): 0x00400040, readback 0x00400040 [2025-09-23 22:08:38.157] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:08:38.173] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:08:38.364] Loaded PowerVR consumer services. [2025-09-23 22:08:38.396] 512+0 records in [2025-09-23 22:08:38.396] 512+0 records out [2025-09-23 22:08:38.428] Waiting data available... [2025-09-23 22:08:38.428] Starting syslogd/klogd: done [2025-09-23 22:08:38.444] DML Start [2025-09-23 22:08:38.635] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:08:38.860] DML res1: 0 [2025-09-23 22:08:39.346] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:08:39.346] Read Success [2025-09-23 22:08:39.346] Verifying certificate... [2025-09-23 22:08:39.602] Verified OK [2025-09-23 22:08:39.619] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:08:41.248] Verified OK [2025-09-23 22:08:41.248] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:08:41.851] Verified OK [2025-09-23 22:08:41.851] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:08:44.393] fs.protected_hardlinks = 1 [2025-09-23 22:08:44.409] fs.protected_symlinks = 1 [2025-09-23 22:08:44.409] kernel.modules_disabled = 1 [2025-09-23 22:08:44.617] [2025-09-23 22:08:44.617] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:08:45.939] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:08:53.717] SBL1:1210.0.1.0 [2025-09-23 22:08:53.765] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:08:55.331] SBL2:1210.0.1.0 [2025-09-23 22:08:55.363] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:08:55.475] j-A [2025-09-23 22:09:02.829] The R5 Autosar Classic is running [2025-09-23 22:09:02.829] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:09:02.850] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:09:03.457] INIT: version 2.96 booting [2025-09-23 22:09:03.569] INIT: Entering runlevel: 5 [2025-09-23 22:09:03.729] mtd24 attached [2025-09-23 22:09:03.745] mtd28 attached [2025-09-23 22:09:03.761] mtd32 attached [2025-09-23 22:09:03.793] ubi0:textures is mounted. [2025-09-23 22:09:03.793] ubi1:animations is mounted. [2025-09-23 22:09:03.854] RTNETLINK answers: File exists [2025-09-23 22:09:03.854] ubi2:dml_code is mounted. [2025-09-23 22:09:03.854] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:09:03.854] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:09:03.854] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:09:03.854] data.LB_FadeInType0=100 [2025-09-23 22:09:03.854] data.CHLH_FadeInType0=0 [2025-09-23 22:09:03.854] data.WU_FadeInDelay=0 [2025-09-23 22:09:03.854] max_time_out=0 [2025-09-23 22:09:03.854] No splash screen [2025-09-23 22:09:03.854] stop dss Done [2025-09-23 22:09:03.854] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:09:03.854] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:09:03.926] /dev/mem opened. [2025-09-23 22:09:03.926] Memory mapped at address 0xffffb0305000. [2025-09-23 22:09:03.926] Read at address 0x00600018 (0xffffb0305018): 0x00000000 [2025-09-23 22:09:03.926] Write at address 0x00600018 (0xffffb0305018): 0x00400040, readback 0x00400040 [2025-09-23 22:09:03.926] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:09:03.926] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:09:04.119] Loaded PowerVR consumer services. [2025-09-23 22:09:04.166] 512+0 records in [2025-09-23 22:09:04.166] 512+0 records out [2025-09-23 22:09:04.182] Waiting data available... [2025-09-23 22:09:04.182] Starting syslogd/klogd: done [2025-09-23 22:09:04.198] DML Start [2025-09-23 22:09:04.375] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:09:04.615] DML res1: 0 [2025-09-23 22:09:05.047] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:09:05.069] Read Success [2025-09-23 22:09:05.069] Verifying certificate... [2025-09-23 22:09:05.341] Verified OK [2025-09-23 22:09:05.357] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:09:06.860] Verified OK [2025-09-23 22:09:06.860] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:09:07.524] Verified OK [2025-09-23 22:09:07.524] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:09:10.354] fs.protected_hardlinks = 1 [2025-09-23 22:09:10.354] fs.protected_symlinks = 1 [2025-09-23 22:09:10.370] kernel.modules_disabled = 1 [2025-09-23 22:09:10.546] [2025-09-23 22:09:10.546] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:09:11.701] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:09:19.472] SBL1:1210.0.1.0 [2025-09-23 22:09:19.519] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:09:21.086] SBL2:1210.0.1.0 [2025-09-23 22:09:21.118] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:09:21.231] j-A [2025-09-23 22:09:28.605] The R5 Autosar Classic is running [2025-09-23 22:09:28.605] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:09:28.605] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:09:29.212] INIT: version 2.96 booting [2025-09-23 22:09:29.324] INIT: Entering runlevel: 5 [2025-09-23 22:09:29.484] mtd24 attached [2025-09-23 22:09:29.484] mtd28 attached [2025-09-23 22:09:29.500] mtd32 attached [2025-09-23 22:09:29.548] RTNETLINK answers: File exists [2025-09-23 22:09:29.548] ubi0:textures is mounted. [2025-09-23 22:09:29.612] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:09:29.612] ubi1:animations is mounted. [2025-09-23 22:09:29.612] ubi2:dml_code is mounted. [2025-09-23 22:09:29.612] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:09:29.612] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:09:29.612] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:09:29.612] data.LB_FadeInType0=100 [2025-09-23 22:09:29.612] data.CHLH_FadeInType0=0 [2025-09-23 22:09:29.612] data.WU_FadeInDelay=0 [2025-09-23 22:09:29.612] max_time_out=0 [2025-09-23 22:09:29.612] No splash screen [2025-09-23 22:09:29.612] stop dss Done [2025-09-23 22:09:29.612] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:09:29.682] /dev/mem opened. [2025-09-23 22:09:29.682] Memory mapped at address 0xffff88ec5000. [2025-09-23 22:09:29.682] Read at address 0x00600018 (0xffff88ec5018): 0x00000000 [2025-09-23 22:09:29.682] Write at address 0x00600018 (0xffff88ec5018): 0x00400040, readback 0x00400040 [2025-09-23 22:09:29.682] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:09:29.698] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:09:29.793] Loaded PowerVR consumer services. [2025-09-23 22:09:29.930] 512+0 records in [2025-09-23 22:09:29.930] 512+0 records out [2025-09-23 22:09:29.930] Waiting data available... [2025-09-23 22:09:29.946] Starting syslogd/klogd: done [2025-09-23 22:09:29.962] DML Start [2025-09-23 22:09:30.154] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:09:30.377] DML res1: 0 [2025-09-23 22:09:30.825] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:09:30.847] Read Success [2025-09-23 22:09:30.847] Verifying certificate... [2025-09-23 22:09:31.055] Verified OK [2025-09-23 22:09:31.071] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:09:32.747] Verified OK [2025-09-23 22:09:32.747] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:09:33.354] Verified OK [2025-09-23 22:09:33.354] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:09:35.977] fs.protected_hardlinks = 1 [2025-09-23 22:09:35.993] fs.protected_symlinks = 1 [2025-09-23 22:09:35.993] kernel.modules_disabled = 1 [2025-09-23 22:09:36.185] [2025-09-23 22:09:36.185] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:09:37.448] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:09:45.243] SBL1:1210.0.1.0 [2025-09-23 22:09:45.291] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:09:46.857] SBL2:1210.0.1.0 [2025-09-23 22:09:46.889] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:09:47.001] j-A [2025-09-23 22:09:54.375] The R5 Autosar Classic is running [2025-09-23 22:09:54.375] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:09:54.375] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:09:54.983] INIT: version 2.96 booting [2025-09-23 22:09:55.094] INIT: Entering runlevel: 5 [2025-09-23 22:09:55.239] mtd28 attached [2025-09-23 22:09:55.254] mtd32 attached [2025-09-23 22:09:55.270] mtd24 attached [2025-09-23 22:09:55.371] RTNETLINK answers: File exists [2025-09-23 22:09:55.371] ubi0:animations is mounted. [2025-09-23 22:09:55.371] ubi1:dml_code is mounted. [2025-09-23 22:09:55.371] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:09:55.371] ubi2:textures is mounted. [2025-09-23 22:09:55.371] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:09:55.371] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:09:55.371] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:09:55.371] data.LB_FadeInType0=100 [2025-09-23 22:09:55.371] data.CHLH_FadeInType0=0 [2025-09-23 22:09:55.371] data.WU_FadeInDelay=0 [2025-09-23 22:09:55.371] max_time_out=0 [2025-09-23 22:09:55.371] No splash screen [2025-09-23 22:09:55.371] stop dss Done [2025-09-23 22:09:55.371] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:09:55.429] /dev/mem opened. [2025-09-23 22:09:55.429] Memory mapped at address 0xffff83feb000. [2025-09-23 22:09:55.429] Read at address 0x00600018 (0xffff83feb018): 0x00000000 [2025-09-23 22:09:55.429] Write at address 0x00600018 (0xffff83feb018): 0x00400040, readback 0x00400040 [2025-09-23 22:09:55.459] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:09:55.459] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:09:55.619] Loaded PowerVR consumer services. [2025-09-23 22:09:55.699] Waiting data available... [2025-09-23 22:09:55.699] 512+0 records in [2025-09-23 22:09:55.715] 512+0 records out [2025-09-23 22:09:55.747] Starting syslogd/klogd: done [2025-09-23 22:09:55.779] DML Start [2025-09-23 22:09:55.971] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:09:56.210] DML res1: 0 [2025-09-23 22:09:56.624] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:09:56.624] Read Success [2025-09-23 22:09:56.624] Verifying certificate... [2025-09-23 22:09:56.879] Verified OK [2025-09-23 22:09:56.895] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:09:58.510] Verified OK [2025-09-23 22:09:58.510] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:09:59.155] Verified OK [2025-09-23 22:09:59.155] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:10:01.793] fs.protected_hardlinks = 1 [2025-09-23 22:10:01.823] fs.protected_symlinks = 1 [2025-09-23 22:10:01.823] kernel.modules_disabled = 1 [2025-09-23 22:10:02.014] [2025-09-23 22:10:02.014] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:10:03.277] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:10:10.986] SBL1:1210.0.1.0 [2025-09-23 22:10:11.018] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:10:12.601] SBL2:1210.0.1.0 [2025-09-23 22:10:12.633] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:10:12.745] j-A [2025-09-23 22:10:20.083] The R5 Autosar Classic is running [2025-09-23 22:10:20.108] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:10:20.108] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:10:20.716] INIT: version 2.96 booting [2025-09-23 22:10:20.827] INIT: Entering runlevel: 5 [2025-09-23 22:10:20.972] mtd28 attached [2025-09-23 22:10:20.988] mtd32 attached [2025-09-23 22:10:21.004] mtd24 attached [2025-09-23 22:10:21.052] RTNETLINK answers: File exists [2025-09-23 22:10:21.052] ubi0:animations is mounted. [2025-09-23 22:10:21.088] ubi1:dml_code is mounted. [2025-09-23 22:10:21.088] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:10:21.088] ubi2:textures is mounted. [2025-09-23 22:10:21.088] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:10:21.088] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:10:21.088] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:10:21.088] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:10:21.113] data.LB_FadeInType0=100 [2025-09-23 22:10:21.113] data.CHLH_FadeInType0=0 [2025-09-23 22:10:21.113] data.WU_FadeInDelay=0 [2025-09-23 22:10:21.113] max_time_out=0 [2025-09-23 22:10:21.113] No splash screen [2025-09-23 22:10:21.113] stop dss Done [2025-09-23 22:10:21.145] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:10:21.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:10:21.180] /dev/mem opened. [2025-09-23 22:10:21.180] Memory mapped at address 0xffffa5cf9000. [2025-09-23 22:10:21.180] Read at address 0x00600018 (0xffffa5cf9018): 0x00000000 [2025-09-23 22:10:21.180] Write at address 0x00600018 (0xffffa5cf9018): 0x00400040, readback 0x00400040 [2025-09-23 22:10:21.276] Loaded PowerVR consumer services. [2025-09-23 22:10:21.431] 512+0 records in [2025-09-23 22:10:21.431] 512+0 records out [2025-09-23 22:10:21.431] Waiting data available... [2025-09-23 22:10:21.463] Starting syslogd/klogd: done [2025-09-23 22:10:21.479] DML Start [2025-09-23 22:10:21.638] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:10:21.878] DML res1: 0 [2025-09-23 22:10:22.369] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:10:22.369] Read Success [2025-09-23 22:10:22.369] Verifying certificate... [2025-09-23 22:10:22.609] Verified OK [2025-09-23 22:10:22.624] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:10:24.320] Verified OK [2025-09-23 22:10:24.320] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:10:24.938] Verified OK [2025-09-23 22:10:24.938] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:10:27.608] fs.protected_hardlinks = 1 [2025-09-23 22:10:27.608] fs.protected_symlinks = 1 [2025-09-23 22:10:27.624] kernel.modules_disabled = 1 [2025-09-23 22:10:27.816] [2025-09-23 22:10:27.816] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:10:28.979] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:10:36.726] SBL1:1210.0.1.0 [2025-09-23 22:10:36.758] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:10:38.341] SBL2:1210.0.1.0 [2025-09-23 22:10:38.373] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:10:38.484] j-A [2025-09-23 22:10:45.857] The R5 Autosar Classic is running [2025-09-23 22:10:45.857] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:10:45.857] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:10:46.464] INIT: version 2.96 booting [2025-09-23 22:10:46.577] INIT: Entering runlevel: 5 [2025-09-23 22:10:46.737] mtd28 attached [2025-09-23 22:10:46.737] mtd32 attached [2025-09-23 22:10:46.753] mtd24 attached [2025-09-23 22:10:46.784] ubi0:animations is mounted. [2025-09-23 22:10:46.800] RTNETLINK answers: File exists [2025-09-23 22:10:46.837] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:10:46.837] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:10:46.837] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:10:46.837] ubi2:textures is mounted. [2025-09-23 22:10:46.837] ubi1:dml_code is mounted. [2025-09-23 22:10:46.837] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:10:46.837] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:10:46.867] data.LB_FadeInType0=100 [2025-09-23 22:10:46.867] data.CHLH_FadeInType0=0 [2025-09-23 22:10:46.867] data.WU_FadeInDelay=0 [2025-09-23 22:10:46.867] max_time_out=0 [2025-09-23 22:10:46.867] No splash screen [2025-09-23 22:10:46.867] stop dss Done [2025-09-23 22:10:46.900] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:10:46.916] /dev/mem opened. [2025-09-23 22:10:46.948] Memory mapped at address 0xffffaa82b000. [2025-09-23 22:10:46.948] Read at address 0x00600018 (0xffffaa82b018): 0x00000000 [2025-09-23 22:10:46.948] Write at address 0x00600018 (0xffffaa82b018): 0x00400040, readback 0x00400040 [2025-09-23 22:10:46.948] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:10:47.124] Loaded PowerVR consumer services. [2025-09-23 22:10:47.171] 512+0 records in [2025-09-23 22:10:47.171] 512+0 records out [2025-09-23 22:10:47.203] Waiting data available... [2025-09-23 22:10:47.219] Starting syslogd/klogd: done [2025-09-23 22:10:47.235] DML Start [2025-09-23 22:10:47.395] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:10:47.603] DML res1: 0 [2025-09-23 22:10:48.114] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:10:48.130] Read Success [2025-09-23 22:10:48.130] Verifying certificate... [2025-09-23 22:10:48.370] Verified OK [2025-09-23 22:10:48.386] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:10:50.027] Verified OK [2025-09-23 22:10:50.027] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:10:50.681] Verified OK [2025-09-23 22:10:50.681] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:10:53.395] fs.protected_hardlinks = 1 [2025-09-23 22:10:53.395] fs.protected_symlinks = 1 [2025-09-23 22:10:53.395] kernel.modules_disabled = 1 [2025-09-23 22:10:53.586] [2025-09-23 22:10:53.586] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:10:54.757] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:11:02.466] SBL1:1210.0.1.0 [2025-09-23 22:11:02.514] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:11:04.081] SBL2:1210.0.1.0 [2025-09-23 22:11:04.113] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:11:04.225] j-A [2025-09-23 22:11:11.580] The R5 Autosar Classic is running [2025-09-23 22:11:11.580] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:11:11.601] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:11:12.209] INIT: version 2.96 booting [2025-09-23 22:11:12.321] INIT: Entering runlevel: 5 [2025-09-23 22:11:12.481] mtd28 attached [2025-09-23 22:11:12.481] mtd24 attached [2025-09-23 22:11:12.497] mtd32 attached [2025-09-23 22:11:12.544] RTNETLINK answers: File exists [2025-09-23 22:11:12.610] ubi0:animations is mounted. [2025-09-23 22:11:12.610] ubi1:textures is mounted. [2025-09-23 22:11:12.610] ubi2:dml_code is mounted. [2025-09-23 22:11:12.610] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:11:12.610] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:11:12.610] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:11:12.610] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:11:12.610] data.LB_FadeInType0=100 [2025-09-23 22:11:12.610] data.CHLH_FadeInType0=0 [2025-09-23 22:11:12.610] data.WU_FadeInDelay=0 [2025-09-23 22:11:12.610] max_time_out=0 [2025-09-23 22:11:12.610] No splash screen [2025-09-23 22:11:12.610] stop dss Done [2025-09-23 22:11:12.610] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:11:12.699] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:11:12.699] /dev/mem opened. [2025-09-23 22:11:12.699] Memory mapped at address 0xffff932ae000. [2025-09-23 22:11:12.699] Read at address 0x00600018 (0xffff932ae018): 0x00000000 [2025-09-23 22:11:12.699] Write at address 0x00600018 (0xffff932ae018): 0x00400040, readback 0x00400040 [2025-09-23 22:11:12.699] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:11:12.778] Loaded PowerVR consumer services. [2025-09-23 22:11:12.907] 512+0 records in [2025-09-23 22:11:12.907] 512+0 records out [2025-09-23 22:11:12.923] Waiting data available... [2025-09-23 22:11:12.954] Starting syslogd/klogd: done [2025-09-23 22:11:12.986] DML Start [2025-09-23 22:11:13.179] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:11:13.386] DML res1: 0 [2025-09-23 22:11:13.818] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:11:13.818] Read Success [2025-09-23 22:11:13.834] Verifying certificate... [2025-09-23 22:11:14.042] Verified OK [2025-09-23 22:11:14.058] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:11:15.640] Verified OK [2025-09-23 22:11:15.640] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:11:16.279] Verified OK [2025-09-23 22:11:16.279] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:11:18.838] fs.protected_hardlinks = 1 [2025-09-23 22:11:18.854] fs.protected_symlinks = 1 [2025-09-23 22:11:18.854] kernel.modules_disabled = 1 [2025-09-23 22:11:19.045] [2025-09-23 22:11:19.045] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:11:20.492] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:11:28.176] SBL1:1210.0.1.0 [2025-09-23 22:11:28.224] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:11:29.807] SBL2:1210.0.1.0 [2025-09-23 22:11:29.839] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 22:11:29.935] j-A [2025-09-23 22:11:37.291] The R5 Autosar Classic is running [2025-09-23 22:11:37.314] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:11:37.314] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:11:37.922] INIT: version 2.96 booting [2025-09-23 22:11:38.033] INIT: Entering runlevel: 5 [2025-09-23 22:11:38.194] mtd24 attached [2025-09-23 22:11:38.194] mtd28 attached [2025-09-23 22:11:38.210] mtd32 attached [2025-09-23 22:11:38.322] RTNETLINK answers: File exists [2025-09-23 22:11:38.322] ubi0:textures is mounted. [2025-09-23 22:11:38.322] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:11:38.322] ubi1:animations is mounted. [2025-09-23 22:11:38.322] ubi2:dml_code is mounted. [2025-09-23 22:11:38.322] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:11:38.322] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:11:38.322] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:11:38.322] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:11:38.322] data.LB_FadeInType0=100 [2025-09-23 22:11:38.322] data.CHLH_FadeInType0=0 [2025-09-23 22:11:38.322] data.WU_FadeInDelay=0 [2025-09-23 22:11:38.322] max_time_out=0 [2025-09-23 22:11:38.322] No splash screen [2025-09-23 22:11:38.322] stop dss Done [2025-09-23 22:11:38.370] /dev/mem opened. [2025-09-23 22:11:38.402] Memory mapped at address 0xffff809d1000. [2025-09-23 22:11:38.402] Read at address 0x00600018 (0xffff809d1018): 0x00000000 [2025-09-23 22:11:38.402] Write at address 0x00600018 (0xffff809d1018): 0x00400040, readback 0x00400040 [2025-09-23 22:11:38.418] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:11:38.434] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:11:38.546] Loaded PowerVR consumer services. [2025-09-23 22:11:38.642] 512+0 records in [2025-09-23 22:11:38.642] 512+0 records out [2025-09-23 22:11:38.658] Waiting data available... [2025-09-23 22:11:38.674] Starting syslogd/klogd: done [2025-09-23 22:11:38.690] DML Start [2025-09-23 22:11:38.898] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:11:39.105] DML res1: 0 [2025-09-23 22:11:39.560] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:11:39.560] Read Success [2025-09-23 22:11:39.560] Verifying certificate... [2025-09-23 22:11:39.784] Verified OK [2025-09-23 22:11:39.800] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:11:41.319] Verified OK [2025-09-23 22:11:41.319] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:11:41.935] Verified OK [2025-09-23 22:11:41.935] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:11:44.669] fs.protected_hardlinks = 1 [2025-09-23 22:11:44.685] fs.protected_symlinks = 1 [2025-09-23 22:11:44.685] kernel.modules_disabled = 1 [2025-09-23 22:11:44.893] [2025-09-23 22:11:44.893] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:11:46.220] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:11:53.920] SBL1:1210.0.1.0 [2025-09-23 22:11:53.952] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:11:55.534] SBL2:1210.0.1.0 [2025-09-23 22:11:55.566] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:11:55.678] j-A [2025-09-23 22:12:03.018] The R5 Autosar Classic is running [2025-09-23 22:12:03.043] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:12:03.043] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:12:03.650] INIT: version 2.96 booting [2025-09-23 22:12:03.763] INIT: Entering runlevel: 5 [2025-09-23 22:12:03.922] mtd28 attached [2025-09-23 22:12:03.922] mtd24 attached [2025-09-23 22:12:03.938] mtd32 attached [2025-09-23 22:12:03.986] RTNETLINK answers: File exists [2025-09-23 22:12:04.030] ubi1:textures is mounted. [2025-09-23 22:12:04.030] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:12:04.030] ubi0:animations is mounted. [2025-09-23 22:12:04.030] ubi2:dml_code is mounted. [2025-09-23 22:12:04.030] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:12:04.030] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:12:04.030] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:12:04.030] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:12:04.030] data.LB_FadeInType0=100 [2025-09-23 22:12:04.051] data.CHLH_FadeInType0=0 [2025-09-23 22:12:04.051] data.WU_FadeInDelay=0 [2025-09-23 22:12:04.051] max_time_out=0 [2025-09-23 22:12:04.051] No splash screen [2025-09-23 22:12:04.051] stop dss Done [2025-09-23 22:12:04.083] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:12:04.125] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:12:04.125] /dev/mem opened. [2025-09-23 22:12:04.125] Memory mapped at address 0xffffb5d20000. [2025-09-23 22:12:04.125] Read at address 0x00600018 (0xffffb5d20018): 0x00000000 [2025-09-23 22:12:04.125] Write at address 0x00600018 (0xffffb5d20018): 0x00400040, readback 0x00400040 [2025-09-23 22:12:04.332] Loaded PowerVR consumer services. [2025-09-23 22:12:04.365] 512+0 records in [2025-09-23 22:12:04.365] 512+0 records out [2025-09-23 22:12:04.381] Waiting data available... [2025-09-23 22:12:04.413] Starting syslogd/klogd: done [2025-09-23 22:12:04.429] DML Start [2025-09-23 22:12:04.588] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:12:04.812] DML res1: 0 [2025-09-23 22:12:05.376] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:12:05.376] Read Success [2025-09-23 22:12:05.376] Verifying certificate... [2025-09-23 22:12:05.616] Verified OK [2025-09-23 22:12:05.632] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:12:07.332] Verified OK [2025-09-23 22:12:07.332] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:12:07.933] Verified OK [2025-09-23 22:12:07.933] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:12:10.507] fs.protected_hardlinks = 1 [2025-09-23 22:12:10.522] fs.protected_symlinks = 1 [2025-09-23 22:12:10.522] kernel.modules_disabled = 1 [2025-09-23 22:12:10.715] [2025-09-23 22:12:10.715] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:12:11.938] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:12:19.648] SBL1:1210.0.1.0 [2025-09-23 22:12:19.696] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:12:21.263] SBL2:1210.0.1.0 [2025-09-23 22:12:21.295] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:12:21.406] j-A [2025-09-23 22:12:28.781] The R5 Autosar Classic is running [2025-09-23 22:12:28.781] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:12:28.781] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:12:29.389] INIT: version 2.96 booting [2025-09-23 22:12:29.501] INIT: Entering runlevel: 5 [2025-09-23 22:12:29.644] mtd24 attached [2025-09-23 22:12:29.660] mtd28 attached [2025-09-23 22:12:29.676] mtd32 attached [2025-09-23 22:12:29.779] RTNETLINK answers: File exists [2025-09-23 22:12:29.779] ubi0:textures is mounted. [2025-09-23 22:12:29.779] ubi1:animations is mounted. [2025-09-23 22:12:29.779] ubi2:dml_code is mounted. [2025-09-23 22:12:29.779] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:12:29.779] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:12:29.779] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:12:29.779] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:12:29.779] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:12:29.779] data.LB_FadeInType0=100 [2025-09-23 22:12:29.779] data.CHLH_FadeInType0=0 [2025-09-23 22:12:29.779] data.WU_FadeInDelay=0 [2025-09-23 22:12:29.779] max_time_out=0 [2025-09-23 22:12:29.779] No splash screen [2025-09-23 22:12:29.779] stop dss Done [2025-09-23 22:12:29.852] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:12:29.852] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:12:29.852] /dev/mem opened. [2025-09-23 22:12:29.852] Memory mapped at address 0xffffaae57000. [2025-09-23 22:12:29.852] Read at address 0x00600018 (0xffffaae57018): 0x00000000 [2025-09-23 22:12:29.852] Write at address 0x00600018 (0xffffaae57018): 0x00400040, readback 0x00400040 [2025-09-23 22:12:29.947] Loaded PowerVR consumer services. [2025-09-23 22:12:30.075] Waiting data available... [2025-09-23 22:12:30.091] 512+0 records in [2025-09-23 22:12:30.091] 512+0 records out [2025-09-23 22:12:30.123] Starting syslogd/klogd: done [2025-09-23 22:12:30.139] DML Start [2025-09-23 22:12:30.331] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:12:30.555] DML res1: 0 [2025-09-23 22:12:30.983] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:12:30.983] Read Success [2025-09-23 22:12:30.983] Verifying certificate... [2025-09-23 22:12:31.223] Verified OK [2025-09-23 22:12:31.239] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:12:32.899] Verified OK [2025-09-23 22:12:32.899] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:12:33.474] Verified OK [2025-09-23 22:12:33.474] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:12:36.177] fs.protected_hardlinks = 1 [2025-09-23 22:12:36.193] fs.protected_symlinks = 1 [2025-09-23 22:12:36.193] kernel.modules_disabled = 1 [2025-09-23 22:12:36.401] [2025-09-23 22:12:36.401] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:12:37.663] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:12:45.399] SBL1:1210.0.1.0 [2025-09-23 22:12:45.430] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:12:47.014] SBL2:1210.0.1.0 [2025-09-23 22:12:47.045] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:12:47.157] j-A [2025-09-23 22:12:54.496] The R5 Autosar Classic is running [2025-09-23 22:12:54.527] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:12:54.528] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:12:55.135] INIT: version 2.96 booting [2025-09-23 22:12:55.247] INIT: Entering runlevel: 5 [2025-09-23 22:12:55.391] mtd24 attached [2025-09-23 22:12:55.407] mtd28 attached [2025-09-23 22:12:55.423] mtd32 attached [2025-09-23 22:12:55.454] ubi0:textures is mounted. [2025-09-23 22:12:55.470] RTNETLINK answers: File exists [2025-09-23 22:12:55.470] ubi1:animations is mounted. [2025-09-23 22:12:55.528] ubi2:dml_code is mounted. [2025-09-23 22:12:55.528] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:12:55.528] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:12:55.528] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:12:55.528] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:12:55.528] data.LB_FadeInType0=100 [2025-09-23 22:12:55.528] data.CHLH_FadeInType0=0 [2025-09-23 22:12:55.528] data.WU_FadeInDelay=0 [2025-09-23 22:12:55.528] max_time_out=0 [2025-09-23 22:12:55.528] No splash screen [2025-09-23 22:12:55.528] stop dss Done [2025-09-23 22:12:55.528] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:12:55.596] /dev/mem opened. [2025-09-23 22:12:55.596] Memory mapped at address 0xffffac6a6000. [2025-09-23 22:12:55.596] Read at address 0x00600018 (0xffffac6a6018): 0x00000000 [2025-09-23 22:12:55.596] Write at address 0x00600018 (0xffffac6a6018): 0x00400040, readback 0x00400040 [2025-09-23 22:12:55.661] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:12:55.677] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:12:55.821] Loaded PowerVR consumer services. [2025-09-23 22:12:55.883] Waiting data available... [2025-09-23 22:12:55.883] 512+0 records in [2025-09-23 22:12:55.883] 512+0 records out [2025-09-23 22:12:55.899] Starting syslogd/klogd: done [2025-09-23 22:12:55.915] DML Start [2025-09-23 22:12:56.075] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:12:56.300] DML res1: 0 [2025-09-23 22:12:56.817] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:12:56.817] Read Success [2025-09-23 22:12:56.817] Verifying certificate... [2025-09-23 22:12:57.058] Verified OK [2025-09-23 22:12:57.074] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:12:58.785] Verified OK [2025-09-23 22:12:58.785] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:12:59.441] Verified OK [2025-09-23 22:12:59.441] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:13:02.063] fs.protected_hardlinks = 1 [2025-09-23 22:13:02.078] fs.protected_symlinks = 1 [2025-09-23 22:13:02.094] kernel.modules_disabled = 1 [2025-09-23 22:13:02.302] [2025-09-23 22:13:02.302] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:13:03.420] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:13:11.148] SBL1:1210.0.1.0 [2025-09-23 22:13:11.180] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:13:12.763] SBL2:1210.0.1.0 [2025-09-23 22:13:12.794] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:13:12.906] j-A [2025-09-23 22:13:20.276] The R5 Autosar Classic is running [2025-09-23 22:13:20.276] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:13:20.276] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:13:20.884] INIT: version 2.96 booting [2025-09-23 22:13:20.996] INIT: Entering runlevel: 5 [2025-09-23 22:13:21.139] mtd32 attached [2025-09-23 22:13:21.155] mtd28 attached [2025-09-23 22:13:21.172] mtd24 attached [2025-09-23 22:13:21.204] ubi0:dml_code is mounted. [2025-09-23 22:13:21.220] RTNETLINK answers: File exists [2025-09-23 22:13:21.274] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:13:21.274] ubi1:animations is mounted. [2025-09-23 22:13:21.274] ubi2:textures is mounted. [2025-09-23 22:13:21.274] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:13:21.274] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:13:21.274] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:13:21.274] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:13:21.274] data.LB_FadeInType0=100 [2025-09-23 22:13:21.274] data.CHLH_FadeInType0=0 [2025-09-23 22:13:21.274] data.WU_FadeInDelay=0 [2025-09-23 22:13:21.275] max_time_out=0 [2025-09-23 22:13:21.275] No splash screen [2025-09-23 22:13:21.275] stop dss Done [2025-09-23 22:13:21.306] /dev/mem opened. [2025-09-23 22:13:21.306] Memory mapped at address 0xffffa5038000. [2025-09-23 22:13:21.332] Read at address 0x00600018 (0xffffa5038018): 0x00000000 [2025-09-23 22:13:21.332] Write at address 0x00600018 (0xffffa5038018): 0x00400040, readback 0x00400040 [2025-09-23 22:13:21.348] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:13:21.365] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:13:21.540] Loaded PowerVR consumer services. [2025-09-23 22:13:21.572] 512+0 records in [2025-09-23 22:13:21.572] 512+0 records out [2025-09-23 22:13:21.604] Waiting data available... [2025-09-23 22:13:21.620] Starting syslogd/klogd: done [2025-09-23 22:13:21.636] DML Start [2025-09-23 22:13:21.828] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:13:22.037] DML res1: 0 [2025-09-23 22:13:22.510] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:13:22.510] Read Success [2025-09-23 22:13:22.510] Verifying certificate... [2025-09-23 22:13:22.749] Verified OK [2025-09-23 22:13:22.766] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:13:24.505] Verified OK [2025-09-23 22:13:24.505] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:13:25.016] Verified OK [2025-09-23 22:13:25.032] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:13:27.511] fs.protected_hardlinks = 1 [2025-09-23 22:13:27.511] fs.protected_symlinks = 1 [2025-09-23 22:13:27.528] kernel.modules_disabled = 1 [2025-09-23 22:13:27.735] [2025-09-23 22:13:27.735] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:13:29.148] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:13:36.890] SBL1:1210.0.1.0 [2025-09-23 22:13:36.921] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:13:38.505] SBL2:1210.0.1.0 [2025-09-23 22:13:38.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:13:38.648] j-A [2025-09-23 22:13:46.020] The R5 Autosar Classic is running [2025-09-23 22:13:46.020] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:13:46.020] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:13:46.628] INIT: version 2.96 booting [2025-09-23 22:13:46.740] INIT: Entering runlevel: 5 [2025-09-23 22:13:46.899] mtd28 attached [2025-09-23 22:13:46.899] mtd24 attached [2025-09-23 22:13:46.916] mtd32 attached [2025-09-23 22:13:46.932] ubi0:animations is mounted. [2025-09-23 22:13:46.964] ubi1:textures is mounted. [2025-09-23 22:13:46.964] RTNETLINK answers: File exists [2025-09-23 22:13:47.022] ubi2:dml_code is mounted. [2025-09-23 22:13:47.022] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:13:47.022] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:13:47.022] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:13:47.022] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:13:47.022] data.LB_FadeInType0=100 [2025-09-23 22:13:47.022] data.CHLH_FadeInType0=0 [2025-09-23 22:13:47.022] data.WU_FadeInDelay=0 [2025-09-23 22:13:47.022] max_time_out=0 [2025-09-23 22:13:47.022] No splash screen [2025-09-23 22:13:47.022] stop dss Done [2025-09-23 22:13:47.022] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:13:47.104] /dev/mem opened. [2025-09-23 22:13:47.104] Memory mapped at address 0xffff9012a000. [2025-09-23 22:13:47.104] Read at address 0x00600018 (0xffff9012a018): 0x00000000 [2025-09-23 22:13:47.104] Write at address 0x00600018 (0xffff9012a018): 0x00400040, readback 0x00400040 [2025-09-23 22:13:47.104] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:13:47.104] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:13:47.217] Loaded PowerVR consumer services. [2025-09-23 22:13:47.344] 512+0 records in [2025-09-23 22:13:47.344] 512+0 records out [2025-09-23 22:13:47.360] Waiting data available... [2025-09-23 22:13:47.392] Starting syslogd/klogd: done [2025-09-23 22:13:47.408] DML Start [2025-09-23 22:13:47.568] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:13:47.792] DML res1: 0 [2025-09-23 22:13:48.286] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:13:48.286] Read Success [2025-09-23 22:13:48.286] Verifying certificate... [2025-09-23 22:13:48.557] Verified OK [2025-09-23 22:13:48.573] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:13:50.260] Verified OK [2025-09-23 22:13:50.260] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:13:50.820] Verified OK [2025-09-23 22:13:50.820] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:13:53.378] fs.protected_hardlinks = 1 [2025-09-23 22:13:53.378] fs.protected_symlinks = 1 [2025-09-23 22:13:53.394] kernel.modules_disabled = 1 [2025-09-23 22:13:53.602] [2025-09-23 22:13:53.602] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:13:54.912] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:14:02.637] SBL1:1210.0.1.0 [2025-09-23 22:14:02.669] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:14:04.252] SBL2:1210.0.1.0 [2025-09-23 22:14:04.284] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:14:04.396] j-A [2025-09-23 22:14:11.733] The R5 Autosar Classic is running [2025-09-23 22:14:11.758] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:14:11.758] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:14:12.366] INIT: version 2.96 booting [2025-09-23 22:14:12.478] INIT: Entering runlevel: 5 [2025-09-23 22:14:12.638] mtd32 attached [2025-09-23 22:14:12.638] mtd28 attached [2025-09-23 22:14:12.654] mtd24 attached [2025-09-23 22:14:12.701] RTNETLINK answers: File exists [2025-09-23 22:14:12.701] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:14:12.749] ubi1:animations is mounted. [2025-09-23 22:14:12.749] ubi0:dml_code is mounted. [2025-09-23 22:14:12.749] ubi2:textures is mounted. [2025-09-23 22:14:12.749] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:14:12.749] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:14:12.749] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:14:12.749] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:14:12.749] data.LB_FadeInType0=100 [2025-09-23 22:14:12.749] data.CHLH_FadeInType0=0 [2025-09-23 22:14:12.770] data.WU_FadeInDelay=0 [2025-09-23 22:14:12.770] max_time_out=0 [2025-09-23 22:14:12.770] No splash screen [2025-09-23 22:14:12.770] stop dss Done [2025-09-23 22:14:12.801] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:14:12.801] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:14:12.834] /dev/mem opened. [2025-09-23 22:14:12.834] Memory mapped at address 0xffff808cf000. [2025-09-23 22:14:12.834] Read at address 0x00600018 (0xffff808cf018): 0x00000000 [2025-09-23 22:14:12.834] Write at address 0x00600018 (0xffff808cf018): 0x00400040, readback 0x00400040 [2025-09-23 22:14:12.945] Loaded PowerVR consumer services. [2025-09-23 22:14:13.073] 512+0 records in [2025-09-23 22:14:13.073] 512+0 records out [2025-09-23 22:14:13.090] Waiting data available... [2025-09-23 22:14:13.122] Starting syslogd/klogd: done [2025-09-23 22:14:13.138] DML Start [2025-09-23 22:14:13.313] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:14:13.584] DML res1: 0 [2025-09-23 22:14:13.953] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:14:13.973] Read Success [2025-09-23 22:14:13.973] Verifying certificate... [2025-09-23 22:14:14.198] Verified OK [2025-09-23 22:14:14.213] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:14:15.931] Verified OK [2025-09-23 22:14:15.931] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:14:16.474] Verified OK [2025-09-23 22:14:16.495] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:14:19.022] fs.protected_hardlinks = 1 [2025-09-23 22:14:19.052] fs.protected_symlinks = 1 [2025-09-23 22:14:19.052] kernel.modules_disabled = 1 [2025-09-23 22:14:19.244] [2025-09-23 22:14:19.244] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:14:20.662] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:14:28.348] SBL1:1210.0.1.0 [2025-09-23 22:14:28.380] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:14:29.963] SBL2:1210.0.1.0 [2025-09-23 22:14:29.995] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:14:30.107] j-A [2025-09-23 22:14:37.476] The R5 Autosar Classic is running [2025-09-23 22:14:37.476] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:14:37.476] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:14:38.084] INIT: version 2.96 booting [2025-09-23 22:14:38.195] INIT: Entering runlevel: 5 [2025-09-23 22:14:38.355] mtd32 attached [2025-09-23 22:14:38.371] mtd24 attached [2025-09-23 22:14:38.371] mtd28 attached [2025-09-23 22:14:38.419] RTNETLINK answers: File exists [2025-09-23 22:14:38.466] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:14:38.466] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:14:38.466] ubi2:animations is mounted. [2025-09-23 22:14:38.466] ubi1:textures is mounted. [2025-09-23 22:14:38.466] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:14:38.466] ubi0:dml_code is mounted. [2025-09-23 22:14:38.466] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:14:38.466] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:14:38.493] data.LB_FadeInType0=100 [2025-09-23 22:14:38.493] data.CHLH_FadeInType0=0 [2025-09-23 22:14:38.493] data.WU_FadeInDelay=0 [2025-09-23 22:14:38.493] max_time_out=0 [2025-09-23 22:14:38.493] No splash screen [2025-09-23 22:14:38.493] stop dss Done [2025-09-23 22:14:38.509] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:14:38.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:14:38.562] /dev/mem opened. [2025-09-23 22:14:38.562] Memory mapped at address 0xffff88f16000. [2025-09-23 22:14:38.562] Read at address 0x00600018 (0xffff88f16018): 0x00000000 [2025-09-23 22:14:38.562] Write at address 0x00600018 (0xffff88f16018): 0x00400040, readback 0x00400040 [2025-09-23 22:14:38.770] Loaded PowerVR consumer services. [2025-09-23 22:14:38.818] 512+0 records in [2025-09-23 22:14:38.818] 512+0 records out [2025-09-23 22:14:38.850] Waiting data available... [2025-09-23 22:14:38.866] Starting syslogd/klogd: done [2025-09-23 22:14:38.882] DML Start [2025-09-23 22:14:39.058] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:14:39.281] DML res1: 0 [2025-09-23 22:14:39.713] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:14:39.729] Read Success [2025-09-23 22:14:39.729] Verifying certificate... [2025-09-23 22:14:39.985] Verified OK [2025-09-23 22:14:40.001] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:14:41.631] Verified OK [2025-09-23 22:14:41.631] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:14:42.302] Verified OK [2025-09-23 22:14:42.302] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:14:44.989] fs.protected_hardlinks = 1 [2025-09-23 22:14:45.004] fs.protected_symlinks = 1 [2025-09-23 22:14:45.004] kernel.modules_disabled = 1 [2025-09-23 22:14:45.212] [2025-09-23 22:14:45.212] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:14:46.367] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:14:54.092] SBL1:1210.0.1.0 [2025-09-23 22:14:54.140] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:14:55.722] SBL2:1210.0.1.0 [2025-09-23 22:14:55.754] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:14:55.850] j-A [2025-09-23 22:15:03.206] The R5 Autosar Classic is running [2025-09-23 22:15:03.229] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:15:03.229] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:15:03.837] INIT: version 2.96 booting [2025-09-23 22:15:03.949] INIT: Entering runlevel: 5 [2025-09-23 22:15:04.109] mtd24 attached [2025-09-23 22:15:04.125] mtd32 attached [2025-09-23 22:15:04.141] mtd28 attached [2025-09-23 22:15:04.141] ubi0:textures is mounted. [2025-09-23 22:15:04.157] ubi1:dml_code is mounted. [2025-09-23 22:15:04.238] RTNETLINK answers: File exists [2025-09-23 22:15:04.238] ubi2:animations is mounted. [2025-09-23 22:15:04.238] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:15:04.238] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:15:04.238] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:15:04.238] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:15:04.238] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:15:04.238] data.LB_FadeInType0=100 [2025-09-23 22:15:04.238] data.CHLH_FadeInType0=0 [2025-09-23 22:15:04.238] data.WU_FadeInDelay=0 [2025-09-23 22:15:04.238] max_time_out=0 [2025-09-23 22:15:04.238] No splash screen [2025-09-23 22:15:04.238] stop dss Done [2025-09-23 22:15:04.271] /dev/mem opened. [2025-09-23 22:15:04.313] Memory mapped at address 0xffff9a2e6000. [2025-09-23 22:15:04.313] Read at address 0x00600018 (0xffff9a2e6018): 0x00000000 [2025-09-23 22:15:04.313] Write at address 0x00600018 (0xffff9a2e6018): 0x00400040, readback 0x00400040 [2025-09-23 22:15:04.313] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:15:04.313] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:15:04.393] Loaded PowerVR consumer services. [2025-09-23 22:15:04.536] Waiting data available... [2025-09-23 22:15:04.536] 512+0 records in [2025-09-23 22:15:04.552] 512+0 records out [2025-09-23 22:15:04.584] Starting syslogd/klogd: done [2025-09-23 22:15:04.616] DML Start [2025-09-23 22:15:04.776] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:15:05.000] DML res1: 0 [2025-09-23 22:15:05.464] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:15:05.480] Read Success [2025-09-23 22:15:05.480] Verifying certificate... [2025-09-23 22:15:05.735] Verified OK [2025-09-23 22:15:05.751] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:15:07.235] Verified OK [2025-09-23 22:15:07.235] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:15:07.963] Verified OK [2025-09-23 22:15:07.963] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:15:10.602] fs.protected_hardlinks = 1 [2025-09-23 22:15:10.602] fs.protected_symlinks = 1 [2025-09-23 22:15:10.617] kernel.modules_disabled = 1 [2025-09-23 22:15:10.809] [2025-09-23 22:15:10.809] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:15:12.103] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:15:19.835] SBL1:1210.0.1.0 [2025-09-23 22:15:19.883] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:15:21.449] SBL2:1210.0.1.0 [2025-09-23 22:15:21.497] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:15:21.594] j-A [2025-09-23 22:15:28.949] The R5 Autosar Classic is running [2025-09-23 22:15:28.972] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:15:28.972] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:15:29.580] INIT: version 2.96 booting [2025-09-23 22:15:29.691] INIT: Entering runlevel: 5 [2025-09-23 22:15:29.852] mtd28 attached [2025-09-23 22:15:29.868] mtd24 attached [2025-09-23 22:15:29.868] mtd32 attached [2025-09-23 22:15:29.916] RTNETLINK answers: File exists [2025-09-23 22:15:29.979] ubi0:animations is mounted. [2025-09-23 22:15:29.979] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:15:29.979] ubi1:textures is mounted. [2025-09-23 22:15:29.979] ubi2:dml_code is mounted. [2025-09-23 22:15:29.979] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:15:29.979] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:15:29.979] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:15:29.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:15:29.979] data.LB_FadeInType0=100 [2025-09-23 22:15:29.979] data.CHLH_FadeInType0=0 [2025-09-23 22:15:29.979] data.WU_FadeInDelay=0 [2025-09-23 22:15:29.979] max_time_out=0 [2025-09-23 22:15:29.979] No splash screen [2025-09-23 22:15:29.979] stop dss Done [2025-09-23 22:15:30.027] /dev/mem opened. [2025-09-23 22:15:30.027] Memory mapped at address 0xffffb6e79000. [2025-09-23 22:15:30.066] Read at address 0x00600018 (0xffffb6e79018): 0x00000000 [2025-09-23 22:15:30.066] Write at address 0x00600018 (0xffffb6e79018): 0x00400040, readback 0x00400040 [2025-09-23 22:15:30.066] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:15:30.066] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:15:30.211] Loaded PowerVR consumer services. [2025-09-23 22:15:30.318] Waiting data available... [2025-09-23 22:15:30.318] 512+0 records in [2025-09-23 22:15:30.318] 512+0 records out [2025-09-23 22:15:30.350] Starting syslogd/klogd: done [2025-09-23 22:15:30.366] DML Start [2025-09-23 22:15:30.558] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:15:30.782] DML res1: 0 [2025-09-23 22:15:31.197] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:15:31.218] Read Success [2025-09-23 22:15:31.218] Verifying certificate... [2025-09-23 22:15:31.475] Verified OK [2025-09-23 22:15:31.491] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:15:33.083] Verified OK [2025-09-23 22:15:33.083] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:15:33.707] Verified OK [2025-09-23 22:15:33.707] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:15:36.313] fs.protected_hardlinks = 1 [2025-09-23 22:15:36.329] fs.protected_symlinks = 1 [2025-09-23 22:15:36.329] kernel.modules_disabled = 1 [2025-09-23 22:15:36.536] [2025-09-23 22:15:36.536] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:15:37.871] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:15:45.590] SBL1:1210.0.1.0 [2025-09-23 22:15:45.622] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:15:47.205] SBL2:1210.0.1.0 [2025-09-23 22:15:47.237] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:15:47.349] j-A [2025-09-23 22:15:54.689] The R5 Autosar Classic is running [2025-09-23 22:15:54.714] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:15:54.714] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:15:55.322] INIT: version 2.96 booting [2025-09-23 22:15:55.433] INIT: Entering runlevel: 5 [2025-09-23 22:15:55.593] mtd24 attached [2025-09-23 22:15:55.593] mtd28 attached [2025-09-23 22:15:55.609] mtd32 attached [2025-09-23 22:15:55.626] ubi0:textures is mounted. [2025-09-23 22:15:55.658] ubi1:animations is mounted. [2025-09-23 22:15:55.658] RTNETLINK answers: File exists [2025-09-23 22:15:55.712] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:15:55.712] ubi2:dml_code is mounted. [2025-09-23 22:15:55.712] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:15:55.712] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:15:55.712] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:15:55.712] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:15:55.712] data.LB_FadeInType0=100 [2025-09-23 22:15:55.712] data.CHLH_FadeInType0=0 [2025-09-23 22:15:55.712] data.WU_FadeInDelay=0 [2025-09-23 22:15:55.712] max_time_out=0 [2025-09-23 22:15:55.712] No splash screen [2025-09-23 22:15:55.712] stop dss Done [2025-09-23 22:15:55.744] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:15:55.784] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:15:55.784] /dev/mem opened. [2025-09-23 22:15:55.784] Memory mapped at address 0xffffbe0f8000. [2025-09-23 22:15:55.784] Read at address 0x00600018 (0xffffbe0f8018): 0x00000000 [2025-09-23 22:15:55.784] Write at address 0x00600018 (0xffffbe0f8018): 0x00400040, readback 0x00400040 [2025-09-23 22:15:56.008] Loaded PowerVR consumer services. [2025-09-23 22:15:56.024] Waiting data available... [2025-09-23 22:15:56.040] 512+0 records in [2025-09-23 22:15:56.040] 512+0 records out [2025-09-23 22:15:56.088] Starting syslogd/klogd: done [2025-09-23 22:15:56.104] DML Start [2025-09-23 22:15:56.296] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:15:56.520] DML res1: 0 [2025-09-23 22:15:56.967] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:15:56.983] Read Success [2025-09-23 22:15:56.983] Verifying certificate... [2025-09-23 22:15:57.287] Verified OK [2025-09-23 22:15:57.319] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:15:59.052] Verified OK [2025-09-23 22:15:59.052] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:15:59.606] Verified OK [2025-09-23 22:15:59.606] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:16:02.100] fs.protected_hardlinks = 1 [2025-09-23 22:16:02.100] fs.protected_symlinks = 1 [2025-09-23 22:16:02.115] kernel.modules_disabled = 1 [2025-09-23 22:16:02.308] [2025-09-23 22:16:02.308] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:16:03.602] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:16:11.319] SBL1:1210.0.1.0 [2025-09-23 22:16:11.367] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:16:12.934] SBL2:1210.0.1.0 [2025-09-23 22:16:12.966] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:16:13.078] j-A [2025-09-23 22:16:20.451] The R5 Autosar Classic is running [2025-09-23 22:16:20.451] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:16:20.451] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:16:21.058] INIT: version 2.96 booting [2025-09-23 22:16:21.171] INIT: Entering runlevel: 5 [2025-09-23 22:16:21.330] mtd28 attached [2025-09-23 22:16:21.347] mtd32 attached [2025-09-23 22:16:21.347] mtd24 attached [2025-09-23 22:16:21.395] RTNETLINK answers: File exists [2025-09-23 22:16:21.461] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:16:21.461] ubi1:dml_code is mounted. [2025-09-23 22:16:21.461] ubi2:textures is mounted. [2025-09-23 22:16:21.461] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:16:21.461] ubi0:animations is mounted. [2025-09-23 22:16:21.461] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:16:21.461] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:16:21.461] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:16:21.461] data.LB_FadeInType0=100 [2025-09-23 22:16:21.461] data.CHLH_FadeInType0=0 [2025-09-23 22:16:21.461] data.WU_FadeInDelay=0 [2025-09-23 22:16:21.461] max_time_out=0 [2025-09-23 22:16:21.461] No splash screen [2025-09-23 22:16:21.461] stop dss Done [2025-09-23 22:16:21.536] /dev/mem opened. [2025-09-23 22:16:21.536] Memory mapped at address 0xffffabd4f000. [2025-09-23 22:16:21.536] Read at address 0x00600018 (0xffffabd4f018): 0x00000000 [2025-09-23 22:16:21.536] Write at address 0x00600018 (0xffffabd4f018): 0x00400040, readback 0x00400040 [2025-09-23 22:16:21.536] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:16:21.536] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:16:21.680] Loaded PowerVR consumer services. [2025-09-23 22:16:21.792] Waiting data available... [2025-09-23 22:16:21.808] 512+0 records in [2025-09-23 22:16:21.808] 512+0 records out [2025-09-23 22:16:21.856] Starting syslogd/klogd: done [2025-09-23 22:16:21.873] DML Start [2025-09-23 22:16:22.064] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:16:22.288] DML res1: 0 [2025-09-23 22:16:22.688] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:16:22.709] Read Success [2025-09-23 22:16:22.709] Verifying certificate... [2025-09-23 22:16:22.965] Verified OK [2025-09-23 22:16:22.981] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:16:24.611] Verified OK [2025-09-23 22:16:24.611] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:16:25.262] Verified OK [2025-09-23 22:16:25.262] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:16:27.772] fs.protected_hardlinks = 1 [2025-09-23 22:16:27.788] fs.protected_symlinks = 1 [2025-09-23 22:16:27.788] kernel.modules_disabled = 1 [2025-09-23 22:16:27.996] [2025-09-23 22:16:27.996] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:16:29.371] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:16:37.073] SBL1:1210.0.1.0 [2025-09-23 22:16:37.121] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:16:38.688] SBL2:1210.0.1.0 [2025-09-23 22:16:38.736] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:16:38.831] j-A [2025-09-23 22:16:46.187] The R5 Autosar Classic is running [2025-09-23 22:16:46.208] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:16:46.208] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:16:46.817] INIT: version 2.96 booting [2025-09-23 22:16:46.928] INIT: Entering runlevel: 5 [2025-09-23 22:16:47.089] mtd28 attached [2025-09-23 22:16:47.089] mtd24 attached [2025-09-23 22:16:47.105] mtd32 attached [2025-09-23 22:16:47.153] ubi0:animations is mounted. [2025-09-23 22:16:47.153] ubi1:textures is mounted. [2025-09-23 22:16:47.169] RTNETLINK answers: File exists [2025-09-23 22:16:47.169] ubi2:dml_code is mounted. [2025-09-23 22:16:47.185] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:16:47.185] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:16:47.230] data.LB_FadeInType0=100 [2025-09-23 22:16:47.230] data.CHLH_FadeInType0=0 [2025-09-23 22:16:47.230] data.WU_FadeInDelay=0 [2025-09-23 22:16:47.230] max_time_out=0 [2025-09-23 22:16:47.230] No splash screen [2025-09-23 22:16:47.230] stop dss Done [2025-09-23 22:16:47.230] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:16:47.230] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:16:47.230] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:16:47.284] /dev/mem opened. [2025-09-23 22:16:47.284] Memory mapped at address 0xffffbe532000. [2025-09-23 22:16:47.284] Read at address 0x00600018 (0xffffbe532018): 0x00000000 [2025-09-23 22:16:47.284] Write at address 0x00600018 (0xffffbe532018): 0x00400040, readback 0x00400040 [2025-09-23 22:16:47.323] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:16:47.323] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:16:47.483] Loaded PowerVR consumer services. [2025-09-23 22:16:47.515] 512+0 records in [2025-09-23 22:16:47.515] 512+0 records out [2025-09-23 22:16:47.547] Starting syslogd/klogd: Waiting data available... [2025-09-23 22:16:47.563] done [2025-09-23 22:16:47.563] DML Start [2025-09-23 22:16:47.771] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:16:47.979] DML res1: 0 [2025-09-23 22:16:48.384] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:16:48.384] Read Success [2025-09-23 22:16:48.384] Verifying certificate... [2025-09-23 22:16:48.624] Verified OK [2025-09-23 22:16:48.640] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:16:50.427] Verified OK [2025-09-23 22:16:50.427] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:16:51.032] Verified OK [2025-09-23 22:16:51.032] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:16:53.670] fs.protected_hardlinks = 1 [2025-09-23 22:16:53.670] fs.protected_symlinks = 1 [2025-09-23 22:16:53.686] kernel.modules_disabled = 1 [2025-09-23 22:16:53.877] [2025-09-23 22:16:53.877] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:16:55.060] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:17:02.819] SBL1:1210.0.1.0 [2025-09-23 22:17:02.851] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:17:04.434] SBL2:1210.0.1.0 [2025-09-23 22:17:04.466] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:17:04.577] j-A [2025-09-23 22:17:11.948] The R5 Autosar Classic is running [2025-09-23 22:17:11.948] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:17:11.948] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:17:12.556] INIT: version 2.96 booting [2025-09-23 22:17:12.667] INIT: Entering runlevel: 5 [2025-09-23 22:17:12.812] mtd24 attached [2025-09-23 22:17:12.828] mtd28 attached [2025-09-23 22:17:12.844] mtd32 attached [2025-09-23 22:17:12.876] ubi0:textures is mounted. [2025-09-23 22:17:12.892] ubi1:animations is mounted. [2025-09-23 22:17:12.892] RTNETLINK answers: File exists [2025-09-23 22:17:12.953] ubi2:dml_code is mounted. [2025-09-23 22:17:12.953] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:17:12.953] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:17:12.953] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:17:12.953] data.LB_FadeInType0=100 [2025-09-23 22:17:12.953] data.CHLH_FadeInType0=0 [2025-09-23 22:17:12.953] data.WU_FadeInDelay=0 [2025-09-23 22:17:12.953] max_time_out=0 [2025-09-23 22:17:12.953] No splash screen [2025-09-23 22:17:12.953] stop dss Done [2025-09-23 22:17:12.953] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:17:12.953] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:17:13.039] /dev/mem opened. [2025-09-23 22:17:13.039] Memory mapped at address 0xffffaff6f000. [2025-09-23 22:17:13.039] Read at address 0x00600018 (0xffffaff6f018): 0x00000000 [2025-09-23 22:17:13.039] Write at address 0x00600018 (0xffffaff6f018): 0x00400040, readback 0x00400040 [2025-09-23 22:17:13.039] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:17:13.055] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:17:13.215] Loaded PowerVR consumer services. [2025-09-23 22:17:13.263] 512+0 records in [2025-09-23 22:17:13.263] 512+0 records out [2025-09-23 22:17:13.295] Waiting data available... [2025-09-23 22:17:13.311] Starting syslogd/klogd: done [2025-09-23 22:17:13.326] DML Start [2025-09-23 22:17:13.502] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:17:13.726] DML res1: 0 [2025-09-23 22:17:14.206] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:17:14.227] Read Success [2025-09-23 22:17:14.227] Verifying certificate... [2025-09-23 22:17:14.467] Verified OK [2025-09-23 22:17:14.483] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:17:16.123] Verified OK [2025-09-23 22:17:16.123] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:17:16.786] Verified OK [2025-09-23 22:17:16.786] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:17:19.454] fs.protected_hardlinks = 1 [2025-09-23 22:17:19.454] fs.protected_symlinks = 1 [2025-09-23 22:17:19.454] kernel.modules_disabled = 1 [2025-09-23 22:17:19.646] [2025-09-23 22:17:19.646] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:17:20.857] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:17:28.554] SBL1:1210.0.1.0 [2025-09-23 22:17:28.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:17:30.168] SBL2:1210.0.1.0 [2025-09-23 22:17:30.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:17:30.312] j-A [2025-09-23 22:17:37.666] The R5 Autosar Classic is running [2025-09-23 22:17:37.691] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:17:37.691] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:17:38.298] INIT: version 2.96 booting [2025-09-23 22:17:38.411] INIT: Entering runlevel: 5 [2025-09-23 22:17:38.570] mtd32 attached [2025-09-23 22:17:38.570] mtd24 attached [2025-09-23 22:17:38.586] mtd28 attached [2025-09-23 22:17:38.634] ubi0:dml_code is mounted. [2025-09-23 22:17:38.634] RTNETLINK answers: File exists [2025-09-23 22:17:38.697] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:17:38.697] ubi1:textures is mounted. [2025-09-23 22:17:38.697] ubi2:animations is mounted. [2025-09-23 22:17:38.697] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:17:38.697] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:17:38.697] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:17:38.697] data.LB_FadeInType0=100 [2025-09-23 22:17:38.697] data.CHLH_FadeInType0=0 [2025-09-23 22:17:38.697] data.WU_FadeInDelay=0 [2025-09-23 22:17:38.697] max_time_out=0 [2025-09-23 22:17:38.697] No splash screen [2025-09-23 22:17:38.697] stop dss Done [2025-09-23 22:17:38.697] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:17:38.766] /dev/mem opened. [2025-09-23 22:17:38.766] Memory mapped at address 0xffffa8b87000. [2025-09-23 22:17:38.766] Read at address 0x00600018 (0xffffa8b87018): 0x00000000 [2025-09-23 22:17:38.766] Write at address 0x00600018 (0xffffa8b87018): 0x00400040, readback 0x00400040 [2025-09-23 22:17:38.766] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:17:38.798] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:17:38.989] Loaded PowerVR consumer services. [2025-09-23 22:17:39.021] Waiting data available... [2025-09-23 22:17:39.037] 512+0 records in [2025-09-23 22:17:39.037] 512+0 records out [2025-09-23 22:17:39.069] Starting syslogd/klogd: done [2025-09-23 22:17:39.085] DML Start [2025-09-23 22:17:39.245] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:17:39.469] DML res1: 0 [2025-09-23 22:17:39.964] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:17:39.964] Read Success [2025-09-23 22:17:39.964] Verifying certificate... [2025-09-23 22:17:40.203] Verified OK [2025-09-23 22:17:40.219] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:17:41.984] Verified OK [2025-09-23 22:17:41.984] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:17:42.559] Verified OK [2025-09-23 22:17:42.580] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:17:45.218] fs.protected_hardlinks = 1 [2025-09-23 22:17:45.218] fs.protected_symlinks = 1 [2025-09-23 22:17:45.234] kernel.modules_disabled = 1 [2025-09-23 22:17:45.426] [2025-09-23 22:17:45.426] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:17:46.566] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:17:54.321] SBL1:1210.0.1.0 [2025-09-23 22:17:54.353] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:17:55.935] SBL2:1210.0.1.0 [2025-09-23 22:17:55.967] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:17:56.079] j-A [2025-09-23 22:18:03.416] The R5 Autosar Classic is running [2025-09-23 22:18:03.447] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:18:03.447] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:18:04.055] INIT: version 2.96 booting [2025-09-23 22:18:04.168] INIT: Entering runlevel: 5 [2025-09-23 22:18:04.311] mtd24 attached [2025-09-23 22:18:04.327] mtd28 attached [2025-09-23 22:18:04.343] mtd32 attached [2025-09-23 22:18:04.419] ubi1:animations is mounted. [2025-09-23 22:18:04.419] ubi0:textures is mounted. [2025-09-23 22:18:04.419] RTNETLINK answers: File exists [2025-09-23 22:18:04.419] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:18:04.419] ubi2:dml_code is mounted. [2025-09-23 22:18:04.419] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:18:04.419] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:18:04.419] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:18:04.445] data.LB_FadeInType0=100 [2025-09-23 22:18:04.445] data.CHLH_FadeInType0=0 [2025-09-23 22:18:04.445] data.WU_FadeInDelay=0 [2025-09-23 22:18:04.445] max_time_out=0 [2025-09-23 22:18:04.445] No splash screen [2025-09-23 22:18:04.445] stop dss Done [2025-09-23 22:18:04.445] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:18:04.520] /dev/mem opened. [2025-09-23 22:18:04.520] Memory mapped at address 0xffffbf4e7000. [2025-09-23 22:18:04.520] Read at address 0x00600018 (0xffffbf4e7018): 0x00000000 [2025-09-23 22:18:04.520] Write at address 0x00600018 (0xffffbf4e7018): 0x00400040, readback 0x00400040 [2025-09-23 22:18:04.520] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:18:04.520] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:18:04.664] Loaded PowerVR consumer services. [2025-09-23 22:18:04.787] Waiting data available... [2025-09-23 22:18:04.787] 512+0 records in [2025-09-23 22:18:04.787] 512+0 records out [2025-09-23 22:18:04.802] Starting syslogd/klogd: done [2025-09-23 22:18:04.818] DML Start [2025-09-23 22:18:05.026] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:18:05.250] DML res1: 0 [2025-09-23 22:18:05.666] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:18:05.666] Read Success [2025-09-23 22:18:05.666] Verifying certificate... [2025-09-23 22:18:05.905] Verified OK [2025-09-23 22:18:05.921] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:18:07.560] Verified OK [2025-09-23 22:18:07.560] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:18:08.183] Verified OK [2025-09-23 22:18:08.183] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:18:10.806] fs.protected_hardlinks = 1 [2025-09-23 22:18:10.806] fs.protected_symlinks = 1 [2025-09-23 22:18:10.822] kernel.modules_disabled = 1 [2025-09-23 22:18:11.030] [2025-09-23 22:18:11.030] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:18:12.323] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:18:20.078] SBL1:1210.0.1.0 [2025-09-23 22:18:20.126] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:18:21.694] SBL2:1210.0.1.0 [2025-09-23 22:18:21.726] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:18:21.837] j-A [2025-09-23 22:18:29.211] The R5 Autosar Classic is running [2025-09-23 22:18:29.211] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:18:29.211] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:18:29.818] INIT: version 2.96 booting [2025-09-23 22:18:29.930] INIT: Entering runlevel: 5 [2025-09-23 22:18:30.074] mtd24 attached [2025-09-23 22:18:30.090] mtd28 attached [2025-09-23 22:18:30.106] mtd32 attached [2025-09-23 22:18:30.121] ubi0:textures is mounted. [2025-09-23 22:18:30.137] ubi1:animations is mounted. [2025-09-23 22:18:30.153] RTNETLINK answers: File exists [2025-09-23 22:18:30.213] ubi2:dml_code is mounted. [2025-09-23 22:18:30.213] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:18:30.213] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:18:30.213] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:18:30.213] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:18:30.213] data.LB_FadeInType0=100 [2025-09-23 22:18:30.213] data.CHLH_FadeInType0=0 [2025-09-23 22:18:30.213] data.WU_FadeInDelay=0 [2025-09-23 22:18:30.213] max_time_out=0 [2025-09-23 22:18:30.213] No splash screen [2025-09-23 22:18:30.213] stop dss Done [2025-09-23 22:18:30.213] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:18:30.303] /dev/mem opened. [2025-09-23 22:18:30.303] Memory mapped at address 0xffff94650000. [2025-09-23 22:18:30.303] Read at address 0x00600018 (0xffff94650018): 0x00000000 [2025-09-23 22:18:30.303] Write at address 0x00600018 (0xffff94650018): 0x00400040, readback 0x00400040 [2025-09-23 22:18:30.303] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:18:30.303] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:18:30.382] Loaded PowerVR consumer services. [2025-09-23 22:18:30.539] 512+0 records in [2025-09-23 22:18:30.539] 512+0 records out [2025-09-23 22:18:30.539] Waiting data available... [2025-09-23 22:18:30.571] Starting syslogd/klogd: done [2025-09-23 22:18:30.587] DML Start [2025-09-23 22:18:30.747] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:18:31.003] DML res1: 0 [2025-09-23 22:18:31.430] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:18:31.430] Read Success [2025-09-23 22:18:31.430] Verifying certificate... [2025-09-23 22:18:31.733] Verified OK [2025-09-23 22:18:31.749] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:18:33.488] Verified OK [2025-09-23 22:18:33.488] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:18:34.078] Verified OK [2025-09-23 22:18:34.078] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:18:36.729] fs.protected_hardlinks = 1 [2025-09-23 22:18:36.729] fs.protected_symlinks = 1 [2025-09-23 22:18:36.729] kernel.modules_disabled = 1 [2025-09-23 22:18:36.920] [2025-09-23 22:18:36.920] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:18:38.104] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:18:45.832] SBL1:1210.0.1.0 [2025-09-23 22:18:45.879] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:18:47.446] SBL2:1210.0.1.0 [2025-09-23 22:18:47.494] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:18:47.590] j-A [2025-09-23 22:18:54.944] The R5 Autosar Classic is running [2025-09-23 22:18:54.969] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:18:54.969] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:18:55.576] INIT: version 2.96 booting [2025-09-23 22:18:55.687] INIT: Entering runlevel: 5 [2025-09-23 22:18:55.848] mtd24 attached [2025-09-23 22:18:55.864] mtd28 attached [2025-09-23 22:18:55.880] mtd32 attached [2025-09-23 22:18:55.896] ubi0:textures is mounted. [2025-09-23 22:18:55.912] ubi1:animations is mounted. [2025-09-23 22:18:55.928] RTNETLINK answers: File exists [2025-09-23 22:18:55.928] ubi2:dml_code is mounted. [2025-09-23 22:18:55.978] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:18:55.978] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:18:55.978] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:18:55.978] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:18:55.978] data.LB_FadeInType0=100 [2025-09-23 22:18:55.978] data.CHLH_FadeInType0=0 [2025-09-23 22:18:55.978] data.WU_FadeInDelay=0 [2025-09-23 22:18:55.978] max_time_out=0 [2025-09-23 22:18:55.978] No splash screen [2025-09-23 22:18:55.978] stop dss Done [2025-09-23 22:18:55.978] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:18:56.051] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:18:56.051] /dev/mem opened. [2025-09-23 22:18:56.051] Memory mapped at address 0xffffb6120000. [2025-09-23 22:18:56.051] Read at address 0x00600018 (0xffffb6120018): 0x00000000 [2025-09-23 22:18:56.051] Write at address 0x00600018 (0xffffb6120018): 0x00400040, readback 0x00400040 [2025-09-23 22:18:56.051] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:18:56.164] Loaded PowerVR consumer services. [2025-09-23 22:18:56.291] 512+0 records in [2025-09-23 22:18:56.291] 512+0 records out [2025-09-23 22:18:56.307] Waiting data available... [2025-09-23 22:18:56.323] Starting syslogd/klogd: done [2025-09-23 22:18:56.339] DML Start [2025-09-23 22:18:56.547] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:18:56.771] DML res1: 0 [2025-09-23 22:18:57.187] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:18:57.208] Read Success [2025-09-23 22:18:57.208] Verifying certificate... [2025-09-23 22:18:57.431] Verified OK [2025-09-23 22:18:57.447] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:18:59.139] Verified OK [2025-09-23 22:18:59.139] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:18:59.779] Verified OK [2025-09-23 22:18:59.779] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:19:02.382] fs.protected_hardlinks = 1 [2025-09-23 22:19:02.382] fs.protected_symlinks = 1 [2025-09-23 22:19:02.382] kernel.modules_disabled = 1 [2025-09-23 22:19:02.574] [2025-09-23 22:19:02.574] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:19:03.854] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:19:11.564] SBL1:1210.0.1.0 [2025-09-23 22:19:11.612] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:19:13.178] SBL2:1210.0.1.0 [2025-09-23 22:19:13.210] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:19:13.322] j-A [2025-09-23 22:19:20.677] The R5 Autosar Classic is running [2025-09-23 22:19:20.677] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:19:20.698] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:19:21.305] INIT: version 2.96 booting [2025-09-23 22:19:21.417] INIT: Entering runlevel: 5 [2025-09-23 22:19:21.561] mtd24 attached [2025-09-23 22:19:21.577] mtd28 attached [2025-09-23 22:19:21.593] mtd32 attached [2025-09-23 22:19:21.625] ubi1:animations is mounted. [2025-09-23 22:19:21.641] ubi0:textures is mounted. [2025-09-23 22:19:21.641] RTNETLINK answers: File exists [2025-09-23 22:19:21.700] ubi2:dml_code is mounted. [2025-09-23 22:19:21.700] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:19:21.700] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:19:21.700] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:19:21.700] data.LB_FadeInType0=100 [2025-09-23 22:19:21.700] data.CHLH_FadeInType0=0 [2025-09-23 22:19:21.700] data.WU_FadeInDelay=0 [2025-09-23 22:19:21.700] max_time_out=0 [2025-09-23 22:19:21.700] No splash screen [2025-09-23 22:19:21.700] stop dss Done [2025-09-23 22:19:21.700] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:19:21.700] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:19:21.770] /dev/mem opened. [2025-09-23 22:19:21.770] Memory mapped at address 0xffffb79bd000. [2025-09-23 22:19:21.770] Read at address 0x00600018 (0xffffb79bd018): 0x00000000 [2025-09-23 22:19:21.770] Write at address 0x00600018 (0xffffb79bd018): 0x00400040, readback 0x00400040 [2025-09-23 22:19:21.786] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:19:21.802] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:19:21.899] Loaded PowerVR consumer services. [2025-09-23 22:19:22.035] 512+0 records in [2025-09-23 22:19:22.035] 512+0 records out [2025-09-23 22:19:22.035] Waiting data available... [2025-09-23 22:19:22.067] Starting syslogd/klogd: done [2025-09-23 22:19:22.083] DML Start [2025-09-23 22:19:22.243] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:19:22.467] DML res1: 0 [2025-09-23 22:19:22.947] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:19:22.947] Read Success [2025-09-23 22:19:22.963] Verifying certificate... [2025-09-23 22:19:23.202] Verified OK [2025-09-23 22:19:23.218] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:19:24.929] Verified OK [2025-09-23 22:19:24.929] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:19:25.473] Verified OK [2025-09-23 22:19:25.473] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:19:28.047] fs.protected_hardlinks = 1 [2025-09-23 22:19:28.063] fs.protected_symlinks = 1 [2025-09-23 22:19:28.063] kernel.modules_disabled = 1 [2025-09-23 22:19:28.255] [2025-09-23 22:19:28.255] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:19:29.581] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:19:37.326] SBL1:1210.0.1.0 [2025-09-23 22:19:37.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:19:38.940] SBL2:1210.0.1.0 [2025-09-23 22:19:38.972] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:19:39.085] j-A [2025-09-23 22:19:46.457] The R5 Autosar Classic is running [2025-09-23 22:19:46.457] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:19:46.457] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:19:47.065] INIT: version 2.96 booting [2025-09-23 22:19:47.161] INIT: Entering runlevel: 5 [2025-09-23 22:19:47.321] mtd24 attached [2025-09-23 22:19:47.336] mtd32 attached [2025-09-23 22:19:47.336] mtd28 attached [2025-09-23 22:19:47.384] RTNETLINK answers: File exists [2025-09-23 22:19:47.437] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:19:47.437] ubi2:animations is mounted. [2025-09-23 22:19:47.437] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:19:47.437] ubi1:dml_code is mounted. [2025-09-23 22:19:47.437] ubi0:textures is mounted. [2025-09-23 22:19:47.437] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:19:47.437] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:19:47.437] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:19:47.460] data.LB_FadeInType0=100 [2025-09-23 22:19:47.460] data.CHLH_FadeInType0=0 [2025-09-23 22:19:47.460] data.WU_FadeInDelay=0 [2025-09-23 22:19:47.460] max_time_out=0 [2025-09-23 22:19:47.460] No splash screen [2025-09-23 22:19:47.460] stop dss Done [2025-09-23 22:19:47.508] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:19:47.543] /dev/mem opened. [2025-09-23 22:19:47.543] Memory mapped at address 0xffff8f883000. [2025-09-23 22:19:47.543] Read at address 0x00600018 (0xffff8f883018): 0x00000000 [2025-09-23 22:19:47.543] Write at address 0x00600018 (0xffff8f883018): 0x00400040, readback 0x00400040 [2025-09-23 22:19:47.543] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:19:47.623] Loaded PowerVR consumer services. [2025-09-23 22:19:47.766] Waiting data available... [2025-09-23 22:19:47.766] 512+0 records in [2025-09-23 22:19:47.766] 512+0 records out [2025-09-23 22:19:47.815] Starting syslogd/klogd: done [2025-09-23 22:19:47.831] DML Start [2025-09-23 22:19:48.006] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:19:48.278] DML res1: 0 [2025-09-23 22:19:48.677] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:19:48.698] Read Success [2025-09-23 22:19:48.698] Verifying certificate... [2025-09-23 22:19:48.939] Verified OK [2025-09-23 22:19:48.955] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:19:50.775] Verified OK [2025-09-23 22:19:50.775] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:19:51.278] Verified OK [2025-09-23 22:19:51.278] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:19:53.708] fs.protected_hardlinks = 1 [2025-09-23 22:19:53.708] fs.protected_symlinks = 1 [2025-09-23 22:19:53.723] kernel.modules_disabled = 1 [2025-09-23 22:19:53.931] [2025-09-23 22:19:53.931] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:19:55.333] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:20:03.055] SBL1:1210.0.1.0 [2025-09-23 22:20:03.103] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:20:04.670] SBL2:1210.0.1.0 [2025-09-23 22:20:04.718] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:20:04.814] j-A [2025-09-23 22:20:12.169] The R5 Autosar Classic is running [2025-09-23 22:20:12.192] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:20:12.192] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:20:12.800] INIT: version 2.96 booting [2025-09-23 22:20:12.912] INIT: Entering runlevel: 5 [2025-09-23 22:20:13.056] mtd32 attached [2025-09-23 22:20:13.072] mtd28 attached [2025-09-23 22:20:13.072] mtd24 attached [2025-09-23 22:20:13.189] RTNETLINK answers: File exists [2025-09-23 22:20:13.189] ubi1:animations is mounted. [2025-09-23 22:20:13.189] ubi0:dml_code is mounted. [2025-09-23 22:20:13.189] ubi2:textures is mounted. [2025-09-23 22:20:13.189] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:20:13.189] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:20:13.189] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:20:13.189] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:20:13.189] data.LB_FadeInType0=100 [2025-09-23 22:20:13.189] data.CHLH_FadeInType0=0 [2025-09-23 22:20:13.189] data.WU_FadeInDelay=0 [2025-09-23 22:20:13.189] max_time_out=0 [2025-09-23 22:20:13.189] No splash screen [2025-09-23 22:20:13.189] stop dss Done [2025-09-23 22:20:13.189] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:20:13.269] /dev/mem opened. [2025-09-23 22:20:13.269] Memory mapped at address 0xffff87cf0000. [2025-09-23 22:20:13.269] Read at address 0x00600018 (0xffff87cf0018): 0x00000000 [2025-09-23 22:20:13.269] Write at address 0x00600018 (0xffff87cf0018): 0x00400040, readback 0x00400040 [2025-09-23 22:20:13.269] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:20:13.285] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:20:13.477] Loaded PowerVR consumer services. [2025-09-23 22:20:13.509] 512+0 records in [2025-09-23 22:20:13.509] 512+0 records out [2025-09-23 22:20:13.541] Waiting data available... [2025-09-23 22:20:13.557] Starting syslogd/klogd: done [2025-09-23 22:20:13.589] DML Start [2025-09-23 22:20:13.732] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:20:13.973] DML res1: 0 [2025-09-23 22:20:14.468] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:20:14.485] Read Success [2025-09-23 22:20:14.485] Verifying certificate... [2025-09-23 22:20:14.756] Verified OK [2025-09-23 22:20:14.788] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:20:16.413] Verified OK [2025-09-23 22:20:16.413] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:20:17.090] Verified OK [2025-09-23 22:20:17.090] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:20:19.712] fs.protected_hardlinks = 1 [2025-09-23 22:20:19.728] fs.protected_symlinks = 1 [2025-09-23 22:20:19.744] kernel.modules_disabled = 1 [2025-09-23 22:20:19.936] [2025-09-23 22:20:19.936] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:20:21.063] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:20:28.813] SBL1:1210.0.1.0 [2025-09-23 22:20:28.845] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:20:30.428] SBL2:1210.0.1.0 [2025-09-23 22:20:30.460] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:20:30.572] j-A [2025-09-23 22:20:37.912] The R5 Autosar Classic is running [2025-09-23 22:20:37.937] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:20:37.937] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:20:38.544] INIT: version 2.96 booting [2025-09-23 22:20:38.657] INIT: Entering runlevel: 5 [2025-09-23 22:20:38.816] mtd32 attached [2025-09-23 22:20:38.816] mtd24 attached [2025-09-23 22:20:38.832] mtd28 attached [2025-09-23 22:20:38.880] RTNETLINK answers: File exists [2025-09-23 22:20:38.880] ubi0:dml_code is mounted. [2025-09-23 22:20:38.914] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:20:38.914] ubi1:textures is mounted. [2025-09-23 22:20:38.914] ubi2:animations is mounted. [2025-09-23 22:20:38.914] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:20:38.914] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:20:38.914] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:20:38.942] data.LB_FadeInType0=100 [2025-09-23 22:20:38.942] data.CHLH_FadeInType0=0 [2025-09-23 22:20:38.942] data.WU_FadeInDelay=0 [2025-09-23 22:20:38.942] max_time_out=0 [2025-09-23 22:20:38.942] No splash screen [2025-09-23 22:20:38.942] stop dss Done [2025-09-23 22:20:38.942] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:20:38.974] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:20:39.022] /dev/mem opened. [2025-09-23 22:20:39.022] Memory mapped at address 0xffffba1a0000. [2025-09-23 22:20:39.022] Read at address 0x00600018 (0xffffba1a0018): 0x00000000 [2025-09-23 22:20:39.022] Write at address 0x00600018 (0xffffba1a0018): 0x00400040, readback 0x00400040 [2025-09-23 22:20:39.022] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:20:39.166] Loaded PowerVR consumer services. [2025-09-23 22:20:39.262] 512+0 records in [2025-09-23 22:20:39.283] 512+0 records out [2025-09-23 22:20:39.283] Waiting data available... [2025-09-23 22:20:39.299] Starting syslogd/klogd: done [2025-09-23 22:20:39.315] DML Start [2025-09-23 22:20:39.491] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:20:39.699] DML res1: 0 [2025-09-23 22:20:40.202] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:20:40.202] Read Success [2025-09-23 22:20:40.202] Verifying certificate... [2025-09-23 22:20:40.425] Verified OK [2025-09-23 22:20:40.441] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:20:42.117] Verified OK [2025-09-23 22:20:42.117] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:20:42.660] Verified OK [2025-09-23 22:20:42.660] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:20:45.203] fs.protected_hardlinks = 1 [2025-09-23 22:20:45.203] fs.protected_symlinks = 1 [2025-09-23 22:20:45.219] kernel.modules_disabled = 1 [2025-09-23 22:20:45.411] [2025-09-23 22:20:45.411] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:20:46.802] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:20:54.542] SBL1:1210.0.1.0 [2025-09-23 22:20:54.590] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:20:56.157] SBL2:1210.0.1.0 [2025-09-23 22:20:56.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:20:56.300] j-A [2025-09-23 22:21:03.673] The R5 Autosar Classic is running [2025-09-23 22:21:03.673] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:21:03.673] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:21:04.280] INIT: version 2.96 booting [2025-09-23 22:21:04.392] INIT: Entering runlevel: 5 [2025-09-23 22:21:04.552] mtd32 attached [2025-09-23 22:21:04.552] mtd28 attached [2025-09-23 22:21:04.568] mtd24 attached [2025-09-23 22:21:04.616] RTNETLINK answers: File exists [2025-09-23 22:21:04.616] ubi0:dml_code is mounted. [2025-09-23 22:21:04.676] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:21:04.676] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:21:04.676] ubi1:animations is mounted. [2025-09-23 22:21:04.676] ubi2:textures is mounted. [2025-09-23 22:21:04.676] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:21:04.676] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:21:04.676] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:21:04.676] data.LB_FadeInType0=100 [2025-09-23 22:21:04.676] data.CHLH_FadeInType0=0 [2025-09-23 22:21:04.676] data.WU_FadeInDelay=0 [2025-09-23 22:21:04.676] max_time_out=0 [2025-09-23 22:21:04.676] No splash screen [2025-09-23 22:21:04.676] stop dss Done [2025-09-23 22:21:04.757] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:21:04.757] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:21:04.757] /dev/mem opened. [2025-09-23 22:21:04.757] Memory mapped at address 0xffff960a9000. [2025-09-23 22:21:04.757] Read at address 0x00600018 (0xffff960a9018): 0x00000000 [2025-09-23 22:21:04.757] Write at address 0x00600018 (0xffff960a9018): 0x00400040, readback 0x00400040 [2025-09-23 22:21:04.917] Loaded PowerVR consumer services. [2025-09-23 22:21:05.013] Waiting data available... [2025-09-23 22:21:05.013] 512+0 records in [2025-09-23 22:21:05.029] 512+0 records out [2025-09-23 22:21:05.061] Starting syslogd/klogd: done [2025-09-23 22:21:05.077] DML Start [2025-09-23 22:21:05.268] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:21:05.461] DML res1: 0 [2025-09-23 22:21:05.924] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:21:05.924] Read Success [2025-09-23 22:21:05.924] Verifying certificate... [2025-09-23 22:21:06.147] Verified OK [2025-09-23 22:21:06.163] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:21:07.790] Verified OK [2025-09-23 22:21:07.790] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:21:08.414] Verified OK [2025-09-23 22:21:08.414] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:21:11.116] fs.protected_hardlinks = 1 [2025-09-23 22:21:11.116] fs.protected_symlinks = 1 [2025-09-23 22:21:11.132] kernel.modules_disabled = 1 [2025-09-23 22:21:11.324] [2025-09-23 22:21:11.324] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:21:12.583] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:21:20.272] SBL1:1210.0.1.0 [2025-09-23 22:21:20.320] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:21:21.886] SBL2:1210.0.1.0 [2025-09-23 22:21:21.934] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 22:21:22.029] j-A [2025-09-23 22:21:29.385] The R5 Autosar Classic is running [2025-09-23 22:21:29.385] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:21:29.406] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:21:30.013] INIT: version 2.96 booting [2025-09-23 22:21:30.126] INIT: Entering runlevel: 5 [2025-09-23 22:21:30.270] mtd24 attached [2025-09-23 22:21:30.285] mtd28 attached [2025-09-23 22:21:30.301] mtd32 attached [2025-09-23 22:21:30.349] RTNETLINK answers: File exists [2025-09-23 22:21:30.349] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:21:30.410] ubi0:textures is mounted. [2025-09-23 22:21:30.410] ubi1:animations is mounted. [2025-09-23 22:21:30.410] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:21:30.410] ubi2:dml_code is mounted. [2025-09-23 22:21:30.410] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:21:30.410] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:21:30.410] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:21:30.410] data.LB_FadeInType0=100 [2025-09-23 22:21:30.410] data.CHLH_FadeInType0=0 [2025-09-23 22:21:30.410] data.WU_FadeInDelay=0 [2025-09-23 22:21:30.410] max_time_out=0 [2025-09-23 22:21:30.410] No splash screen [2025-09-23 22:21:30.410] stop dss Done [2025-09-23 22:21:30.477] /dev/mem opened. [2025-09-23 22:21:30.477] Memory mapped at address 0xffff8c578000. [2025-09-23 22:21:30.477] Read at address 0x00600018 (0xffff8c578018): 0x00000000 [2025-09-23 22:21:30.477] Write at address 0x00600018 (0xffff8c578018): 0x00400040, readback 0x00400040 [2025-09-23 22:21:30.493] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:21:30.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:21:30.685] Loaded PowerVR consumer services. [2025-09-23 22:21:30.733] 512+0 records in [2025-09-23 22:21:30.733] 512+0 records out [2025-09-23 22:21:30.765] Waiting data available... [2025-09-23 22:21:30.781] Starting syslogd/klogd: done [2025-09-23 22:21:30.797] DML Start [2025-09-23 22:21:31.021] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:21:31.261] DML res1: 0 [2025-09-23 22:21:31.581] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:21:31.597] Read Success [2025-09-23 22:21:31.597] Verifying certificate... [2025-09-23 22:21:31.821] Verified OK [2025-09-23 22:21:31.853] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:21:33.477] Verified OK [2025-09-23 22:21:33.477] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:21:34.081] Verified OK [2025-09-23 22:21:34.081] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:21:36.752] fs.protected_hardlinks = 1 [2025-09-23 22:21:36.768] fs.protected_symlinks = 1 [2025-09-23 22:21:36.768] kernel.modules_disabled = 1 [2025-09-23 22:21:36.959] [2025-09-23 22:21:36.959] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:21:38.313] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:21:46.004] SBL1:1210.0.1.0 [2025-09-23 22:21:46.052] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:21:47.635] SBL2:1210.0.1.0 [2025-09-23 22:21:47.667] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:21:47.762] j-A [2025-09-23 22:21:55.117] The R5 Autosar Classic is running [2025-09-23 22:21:55.142] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:21:55.142] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:21:55.749] INIT: version 2.96 booting [2025-09-23 22:21:55.862] INIT: Entering runlevel: 5 [2025-09-23 22:21:56.021] mtd24 attached [2025-09-23 22:21:56.021] mtd32 attached [2025-09-23 22:21:56.037] mtd28 attached [2025-09-23 22:21:56.086] RTNETLINK answers: File exists [2025-09-23 22:21:56.128] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:21:56.128] ubi0:textures is mounted. [2025-09-23 22:21:56.128] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:21:56.128] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:21:56.128] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:21:56.128] ubi1:dml_code is mounted. [2025-09-23 22:21:56.128] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:21:56.128] ubi2:animations is mounted. [2025-09-23 22:21:56.157] data.LB_FadeInType0=100 [2025-09-23 22:21:56.157] data.CHLH_FadeInType0=0 [2025-09-23 22:21:56.157] data.WU_FadeInDelay=0 [2025-09-23 22:21:56.157] max_time_out=0 [2025-09-23 22:21:56.157] No splash screen [2025-09-23 22:21:56.157] stop dss Done [2025-09-23 22:21:56.180] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:21:56.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:21:56.196] /dev/mem opened. [2025-09-23 22:21:56.228] Memory mapped at address 0xffffabde9000. [2025-09-23 22:21:56.228] Read at address 0x00600018 (0xffffabde9018): 0x00000000 [2025-09-23 22:21:56.228] Write at address 0x00600018 (0xffffabde9018): 0x00400040, readback 0x00400040 [2025-09-23 22:21:56.308] Loaded PowerVR consumer services. [2025-09-23 22:21:56.451] 512+0 records in [2025-09-23 22:21:56.451] 512+0 records out [2025-09-23 22:21:56.467] Waiting data available... [2025-09-23 22:21:56.499] Starting syslogd/klogd: done [2025-09-23 22:21:56.516] DML Start [2025-09-23 22:21:56.707] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:21:56.931] DML res1: 0 [2025-09-23 22:21:57.341] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:21:57.341] Read Success [2025-09-23 22:21:57.341] Verifying certificate... [2025-09-23 22:21:57.645] Verified OK [2025-09-23 22:21:57.661] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:21:59.404] Verified OK [2025-09-23 22:21:59.404] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:22:00.021] Verified OK [2025-09-23 22:22:00.021] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:22:02.516] fs.protected_hardlinks = 1 [2025-09-23 22:22:02.516] fs.protected_symlinks = 1 [2025-09-23 22:22:02.532] kernel.modules_disabled = 1 [2025-09-23 22:22:02.724] [2025-09-23 22:22:02.724] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:22:04.013] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:22:11.775] SBL1:1210.0.1.0 [2025-09-23 22:22:11.823] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:22:13.390] SBL2:1210.0.1.0 [2025-09-23 22:22:13.421] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:22:13.534] j-A [2025-09-23 22:22:20.907] The R5 Autosar Classic is running [2025-09-23 22:22:20.907] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:22:20.907] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:22:21.515] INIT: version 2.96 booting [2025-09-23 22:22:21.610] INIT: Entering runlevel: 5 [2025-09-23 22:22:21.771] mtd28 attached [2025-09-23 22:22:21.787] mtd24 attached [2025-09-23 22:22:21.803] mtd32 attached [2025-09-23 22:22:21.835] RTNETLINK answers: File exists [2025-09-23 22:22:21.835] ubi1:textures is mounted. [2025-09-23 22:22:21.880] ubi0:animations is mounted. [2025-09-23 22:22:21.880] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:22:21.880] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:22:21.880] ubi2:dml_code is mounted. [2025-09-23 22:22:21.880] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:22:21.880] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:22:21.880] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:22:21.880] data.LB_FadeInType0=100 [2025-09-23 22:22:21.901] data.CHLH_FadeInType0=0 [2025-09-23 22:22:21.901] data.WU_FadeInDelay=0 [2025-09-23 22:22:21.901] max_time_out=0 [2025-09-23 22:22:21.901] No splash screen [2025-09-23 22:22:21.901] stop dss Done [2025-09-23 22:22:21.933] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:22:21.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:22:21.979] /dev/mem opened. [2025-09-23 22:22:21.979] Memory mapped at address 0xffff9f1f6000. [2025-09-23 22:22:21.979] Read at address 0x00600018 (0xffff9f1f6018): 0x00000000 [2025-09-23 22:22:21.979] Write at address 0x00600018 (0xffff9f1f6018): 0x00400040, readback 0x00400040 [2025-09-23 22:22:22.060] Loaded PowerVR consumer services. [2025-09-23 22:22:22.203] 512+0 records in [2025-09-23 22:22:22.203] 512+0 records out [2025-09-23 22:22:22.219] Waiting data available... [2025-09-23 22:22:22.251] Starting syslogd/klogd: done [2025-09-23 22:22:22.283] DML Start [2025-09-23 22:22:22.459] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:22:22.683] DML res1: 0 [2025-09-23 22:22:23.114] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:22:23.130] Read Success [2025-09-23 22:22:23.130] Verifying certificate... [2025-09-23 22:22:23.355] Verified OK [2025-09-23 22:22:23.371] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:22:25.075] Verified OK [2025-09-23 22:22:25.075] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:22:25.645] Verified OK [2025-09-23 22:22:25.645] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:22:28.283] fs.protected_hardlinks = 1 [2025-09-23 22:22:28.314] fs.protected_symlinks = 1 [2025-09-23 22:22:28.314] kernel.modules_disabled = 1 [2025-09-23 22:22:28.490] [2025-09-23 22:22:28.490] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:22:29.759] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:22:37.521] SBL1:1210.0.1.0 [2025-09-23 22:22:37.568] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:22:39.135] SBL2:1210.0.1.0 [2025-09-23 22:22:39.183] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:22:39.279] j-A [2025-09-23 22:22:46.633] The R5 Autosar Classic is running [2025-09-23 22:22:46.654] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:22:46.654] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:22:47.261] INIT: version 2.96 booting [2025-09-23 22:22:47.374] INIT: Entering runlevel: 5 [2025-09-23 22:22:47.518] mtd28 attached [2025-09-23 22:22:47.534] mtd24 attached [2025-09-23 22:22:47.550] mtd32 attached [2025-09-23 22:22:47.606] ubi0:animations is mounted. [2025-09-23 22:22:47.606] ubi1:textures is mounted. [2025-09-23 22:22:47.606] RTNETLINK answers: File exists [2025-09-23 22:22:47.606] ubi2:dml_code is mounted. [2025-09-23 22:22:47.606] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:22:47.658] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:22:47.658] data.LB_FadeInType0=100 [2025-09-23 22:22:47.658] data.CHLH_FadeInType0=0 [2025-09-23 22:22:47.658] data.WU_FadeInDelay=0 [2025-09-23 22:22:47.658] max_time_out=0 [2025-09-23 22:22:47.658] No splash screen [2025-09-23 22:22:47.658] stop dss Done [2025-09-23 22:22:47.658] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:22:47.658] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:22:47.658] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:22:47.737] /dev/mem opened. [2025-09-23 22:22:47.737] Memory mapped at address 0xffffb56db000. [2025-09-23 22:22:47.737] Read at address 0x00600018 (0xffffb56db018): 0x00000000 [2025-09-23 22:22:47.737] Write at address 0x00600018 (0xffffb56db018): 0x00400040, readback 0x00400040 [2025-09-23 22:22:47.737] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:22:47.737] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:22:47.834] Loaded PowerVR consumer services. [2025-09-23 22:22:47.984] 512+0 records in [2025-09-23 22:22:47.984] 512+0 records out [2025-09-23 22:22:47.984] Waiting data available... [2025-09-23 22:22:48.016] Starting syslogd/klogd: done [2025-09-23 22:22:48.032] DML Start [2025-09-23 22:22:48.192] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:22:48.399] DML res1: 0 [2025-09-23 22:22:48.918] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:22:48.918] Read Success [2025-09-23 22:22:48.918] Verifying certificate... [2025-09-23 22:22:49.174] Verified OK [2025-09-23 22:22:49.206] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:22:50.890] Verified OK [2025-09-23 22:22:50.890] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:22:51.513] Verified OK [2025-09-23 22:22:51.513] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:22:54.150] fs.protected_hardlinks = 1 [2025-09-23 22:22:54.166] fs.protected_symlinks = 1 [2025-09-23 22:22:54.166] kernel.modules_disabled = 1 [2025-09-23 22:22:54.359] [2025-09-23 22:22:54.359] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:22:55.509] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:23:03.292] SBL1:1210.0.1.0 [2025-09-23 22:23:03.340] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:23:04.907] SBL2:1210.0.1.0 [2025-09-23 22:23:04.939] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:23:05.051] j-A [2025-09-23 22:23:12.424] The R5 Autosar Classic is running [2025-09-23 22:23:12.424] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:23:12.424] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:23:13.031] INIT: version 2.96 booting [2025-09-23 22:23:13.144] INIT: Entering runlevel: 5 [2025-09-23 22:23:13.287] mtd28 attached [2025-09-23 22:23:13.303] mtd32 attached [2025-09-23 22:23:13.319] mtd24 attached [2025-09-23 22:23:13.367] ubi0:animations is mounted. [2025-09-23 22:23:13.367] RTNETLINK answers: File exists [2025-09-23 22:23:13.425] ubi2:textures is mounted. [2025-09-23 22:23:13.425] ubi1:dml_code is mounted. [2025-09-23 22:23:13.425] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:23:13.425] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:23:13.425] data.LB_FadeInType0=100 [2025-09-23 22:23:13.425] data.CHLH_FadeInType0=0 [2025-09-23 22:23:13.425] data.WU_FadeInDelay=0 [2025-09-23 22:23:13.425] max_time_out=0 [2025-09-23 22:23:13.425] No splash screen [2025-09-23 22:23:13.425] stop dss Done [2025-09-23 22:23:13.425] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:23:13.425] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:23:13.425] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:23:13.488] /dev/mem opened. [2025-09-23 22:23:13.488] Memory mapped at address 0xffffad082000. [2025-09-23 22:23:13.488] Read at address 0x00600018 (0xffffad082018): 0x00000000 [2025-09-23 22:23:13.488] Write at address 0x00600018 (0xffffad082018): 0x00400040, readback 0x00400040 [2025-09-23 22:23:13.504] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:23:13.520] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:23:13.649] Loaded PowerVR consumer services. [2025-09-23 22:23:13.774] Waiting data available... [2025-09-23 22:23:13.774] 512+0 records in [2025-09-23 22:23:13.774] 512+0 records out [2025-09-23 22:23:13.790] Starting syslogd/klogd: done [2025-09-23 22:23:13.806] DML Start [2025-09-23 22:23:13.965] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:23:14.189] DML res1: 0 [2025-09-23 22:23:14.685] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:23:14.706] Read Success [2025-09-23 22:23:14.706] Verifying certificate... [2025-09-23 22:23:14.930] Verified OK [2025-09-23 22:23:14.946] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:23:16.519] Verified OK [2025-09-23 22:23:16.519] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:23:17.026] Verified OK [2025-09-23 22:23:17.026] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:23:19.664] fs.protected_hardlinks = 1 [2025-09-23 22:23:19.664] fs.protected_symlinks = 1 [2025-09-23 22:23:19.679] kernel.modules_disabled = 1 [2025-09-23 22:23:19.871] [2025-09-23 22:23:19.871] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:23:21.260] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:23:29.042] SBL1:1210.0.1.0 [2025-09-23 22:23:29.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:23:30.656] SBL2:1210.0.1.0 [2025-09-23 22:23:30.688] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:23:30.800] j-A [2025-09-23 22:23:38.156] The R5 Autosar Classic is running [2025-09-23 22:23:38.156] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:23:38.177] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:23:38.784] INIT: version 2.96 booting [2025-09-23 22:23:38.896] INIT: Entering runlevel: 5 [2025-09-23 22:23:39.056] mtd28 attached [2025-09-23 22:23:39.056] mtd24 attached [2025-09-23 22:23:39.071] mtd32 attached [2025-09-23 22:23:39.119] ubi0:animations is mounted. [2025-09-23 22:23:39.119] RTNETLINK answers: File exists [2025-09-23 22:23:39.135] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:23:39.135] ubi1:textures is mounted. [2025-09-23 22:23:39.161] ubi2:dml_code is mounted. [2025-09-23 22:23:39.161] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:23:39.161] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:23:39.161] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:23:39.161] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:23:39.182] data.LB_FadeInType0=100 [2025-09-23 22:23:39.182] data.CHLH_FadeInType0=0 [2025-09-23 22:23:39.182] data.WU_FadeInDelay=0 [2025-09-23 22:23:39.182] max_time_out=0 [2025-09-23 22:23:39.182] No splash screen [2025-09-23 22:23:39.182] stop dss Done [2025-09-23 22:23:39.253] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:23:39.253] /dev/mem opened. [2025-09-23 22:23:39.253] Memory mapped at address 0xffffa91eb000. [2025-09-23 22:23:39.253] Read at address 0x00600018 (0xffffa91eb018): 0x00000000 [2025-09-23 22:23:39.253] Write at address 0x00600018 (0xffffa91eb018): 0x00400040, readback 0x00400040 [2025-09-23 22:23:39.253] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:23:39.477] Loaded PowerVR consumer services. [2025-09-23 22:23:39.536] Waiting data available... [2025-09-23 22:23:39.536] 512+0 records in [2025-09-23 22:23:39.536] 512+0 records out [2025-09-23 22:23:39.552] Starting syslogd/klogd: done [2025-09-23 22:23:39.568] DML Start [2025-09-23 22:23:39.776] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:23:39.967] DML res1: 0 [2025-09-23 22:23:40.399] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:23:40.420] Read Success [2025-09-23 22:23:40.420] Verifying certificate... [2025-09-23 22:23:40.660] Verified OK [2025-09-23 22:23:40.675] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:23:42.412] Verified OK [2025-09-23 22:23:42.412] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:23:42.972] Verified OK [2025-09-23 22:23:42.972] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:23:45.482] fs.protected_hardlinks = 1 [2025-09-23 22:23:45.482] fs.protected_symlinks = 1 [2025-09-23 22:23:45.498] kernel.modules_disabled = 1 [2025-09-23 22:23:45.673] [2025-09-23 22:23:45.673] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:23:46.997] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:23:54.810] SBL1:1210.0.1.0 [2025-09-23 22:23:54.858] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:23:56.426] SBL2:1210.0.1.0 [2025-09-23 22:23:56.473] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:23:56.569] j-A [2025-09-23 22:24:03.924] The R5 Autosar Classic is running [2025-09-23 22:24:03.924] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:24:03.945] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:24:04.553] INIT: version 2.96 booting [2025-09-23 22:24:04.665] INIT: Entering runlevel: 5 [2025-09-23 22:24:04.809] mtd28 attached [2025-09-23 22:24:04.825] mtd24 attached [2025-09-23 22:24:04.841] mtd32 attached [2025-09-23 22:24:04.873] ubi0:animations is mounted. [2025-09-23 22:24:04.889] RTNETLINK answers: File exists [2025-09-23 22:24:04.889] ubi1:textures is mounted. [2025-09-23 22:24:04.943] ubi2:dml_code is mounted. [2025-09-23 22:24:04.943] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:24:04.943] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:24:04.943] data.LB_FadeInType0=100 [2025-09-23 22:24:04.943] data.CHLH_FadeInType0=0 [2025-09-23 22:24:04.943] data.WU_FadeInDelay=0 [2025-09-23 22:24:04.943] max_time_out=0 [2025-09-23 22:24:04.943] No splash screen [2025-09-23 22:24:04.943] stop dss Done [2025-09-23 22:24:04.943] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:24:04.943] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:24:04.943] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:24:05.026] /dev/mem opened. [2025-09-23 22:24:05.026] Memory mapped at address 0xffff87e7a000. [2025-09-23 22:24:05.026] Read at address 0x00600018 (0xffff87e7a018): 0x00000000 [2025-09-23 22:24:05.026] Write at address 0x00600018 (0xffff87e7a018): 0x00400040, readback 0x00400040 [2025-09-23 22:24:05.026] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:24:05.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:24:05.217] Loaded PowerVR consumer services. [2025-09-23 22:24:05.265] Waiting data available... [2025-09-23 22:24:05.281] 512+0 records in [2025-09-23 22:24:05.281] 512+0 records out [2025-09-23 22:24:05.329] Starting syslogd/klogd: done [2025-09-23 22:24:05.345] DML Start [2025-09-23 22:24:05.553] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:24:05.777] DML res1: 0 [2025-09-23 22:24:06.145] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:24:06.166] Read Success [2025-09-23 22:24:06.166] Verifying certificate... [2025-09-23 22:24:06.374] Verified OK [2025-09-23 22:24:06.390] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:24:08.025] Verified OK [2025-09-23 22:24:08.025] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:24:08.606] Verified OK [2025-09-23 22:24:08.606] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:24:11.192] fs.protected_hardlinks = 1 [2025-09-23 22:24:11.192] fs.protected_symlinks = 1 [2025-09-23 22:24:11.192] kernel.modules_disabled = 1 [2025-09-23 22:24:11.399] [2025-09-23 22:24:11.399] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:24:12.863] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:24:20.549] SBL1:1210.0.1.0 [2025-09-23 22:24:20.596] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:24:22.162] SBL2:1210.0.1.0 [2025-09-23 22:24:22.211] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:24:22.306] j-A [2025-09-23 22:24:29.663] The R5 Autosar Classic is running [2025-09-23 22:24:29.687] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:24:29.687] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:24:30.294] INIT: version 2.96 booting [2025-09-23 22:24:30.406] INIT: Entering runlevel: 5 [2025-09-23 22:24:30.550] mtd24 attached [2025-09-23 22:24:30.566] mtd28 attached [2025-09-23 22:24:30.582] mtd32 attached [2025-09-23 22:24:30.657] RTNETLINK answers: File exists [2025-09-23 22:24:30.657] ubi1:animations is mounted. [2025-09-23 22:24:30.657] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:24:30.657] ubi0:textures is mounted. [2025-09-23 22:24:30.657] ubi2:dml_code is mounted. [2025-09-23 22:24:30.657] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:24:30.657] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:24:30.691] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:24:30.691] data.LB_FadeInType0=100 [2025-09-23 22:24:30.691] data.CHLH_FadeInType0=0 [2025-09-23 22:24:30.691] data.WU_FadeInDelay=0 [2025-09-23 22:24:30.691] max_time_out=0 [2025-09-23 22:24:30.691] No splash screen [2025-09-23 22:24:30.691] stop dss Done [2025-09-23 22:24:30.691] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:24:30.759] /dev/mem opened. [2025-09-23 22:24:30.759] Memory mapped at address 0xffff84cff000. [2025-09-23 22:24:30.759] Read at address 0x00600018 (0xffff84cff018): 0x00000000 [2025-09-23 22:24:30.759] Write at address 0x00600018 (0xffff84cff018): 0x00400040, readback 0x00400040 [2025-09-23 22:24:30.791] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:24:30.807] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:24:30.951] Loaded PowerVR consumer services. [2025-09-23 22:24:30.983] 512+0 records in [2025-09-23 22:24:30.999] 512+0 records out [2025-09-23 22:24:31.015] Waiting data available... [2025-09-23 22:24:31.031] Starting syslogd/klogd: done [2025-09-23 22:24:31.047] DML Start [2025-09-23 22:24:31.223] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:24:31.399] DML res1: 0 [2025-09-23 22:24:31.926] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:24:31.926] Read Success [2025-09-23 22:24:31.942] Verifying certificate... [2025-09-23 22:24:32.182] Verified OK [2025-09-23 22:24:32.198] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:24:33.845] Verified OK [2025-09-23 22:24:33.845] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:24:34.481] Verified OK [2025-09-23 22:24:34.481] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:24:37.070] fs.protected_hardlinks = 1 [2025-09-23 22:24:37.070] fs.protected_symlinks = 1 [2025-09-23 22:24:37.070] kernel.modules_disabled = 1 [2025-09-23 22:24:37.246] [2025-09-23 22:24:37.246] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:24:38.545] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:24:46.308] SBL1:1210.0.1.0 [2025-09-23 22:24:46.356] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:24:47.922] SBL2:1210.0.1.0 [2025-09-23 22:24:47.954] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:24:48.067] j-A [2025-09-23 22:24:55.441] The R5 Autosar Classic is running [2025-09-23 22:24:55.441] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:24:55.441] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:24:56.048] INIT: version 2.96 booting [2025-09-23 22:24:56.161] INIT: Entering runlevel: 5 [2025-09-23 22:24:56.304] mtd24 attached [2025-09-23 22:24:56.320] mtd28 attached [2025-09-23 22:24:56.336] mtd32 attached [2025-09-23 22:24:56.384] ubi0:textures is mounted. [2025-09-23 22:24:56.384] RTNETLINK answers: File exists [2025-09-23 22:24:56.384] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:24:56.420] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:24:56.420] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:24:56.420] ubi1:animations is mounted. [2025-09-23 22:24:56.420] ubi2:dml_code is mounted. [2025-09-23 22:24:56.420] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:24:56.420] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:24:56.450] data.LB_FadeInType0=100 [2025-09-23 22:24:56.450] data.CHLH_FadeInType0=0 [2025-09-23 22:24:56.450] data.WU_FadeInDelay=0 [2025-09-23 22:24:56.450] max_time_out=0 [2025-09-23 22:24:56.450] No splash screen [2025-09-23 22:24:56.450] stop dss Done [2025-09-23 22:24:56.466] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:24:56.482] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:24:56.499] /dev/mem opened. [2025-09-23 22:24:56.499] Memory mapped at address 0xffff9e333000. [2025-09-23 22:24:56.524] Read at address 0x00600018 (0xffff9e333018): 0x00000000 [2025-09-23 22:24:56.524] Write at address 0x00600018 (0xffff9e333018): 0x00400040, readback 0x00400040 [2025-09-23 22:24:56.636] Loaded PowerVR consumer services. [2025-09-23 22:24:56.773] Waiting data available... [2025-09-23 22:24:56.773] 512+0 records in [2025-09-23 22:24:56.773] 512+0 records out [2025-09-23 22:24:56.805] Starting syslogd/klogd: done [2025-09-23 22:24:56.821] DML Start [2025-09-23 22:24:57.013] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:24:57.253] DML res1: 0 [2025-09-23 22:24:57.652] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:24:57.669] Read Success [2025-09-23 22:24:57.669] Verifying certificate... [2025-09-23 22:24:57.908] Verified OK [2025-09-23 22:24:57.925] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:24:59.457] Verified OK [2025-09-23 22:24:59.457] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:25:00.023] Verified OK [2025-09-23 22:25:00.023] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:25:02.901] fs.protected_hardlinks = 1 [2025-09-23 22:25:02.917] fs.protected_symlinks = 1 [2025-09-23 22:25:02.917] kernel.modules_disabled = 1 [2025-09-23 22:25:03.109] [2025-09-23 22:25:03.109] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:25:04.330] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:25:12.078] SBL1:1210.0.1.0 [2025-09-23 22:25:12.109] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:25:13.692] SBL2:1210.0.1.0 [2025-09-23 22:25:13.724] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:25:13.836] j-A [2025-09-23 22:25:21.209] The R5 Autosar Classic is running [2025-09-23 22:25:21.209] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:25:21.209] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:25:21.817] INIT: version 2.96 booting [2025-09-23 22:25:21.929] INIT: Entering runlevel: 5 [2025-09-23 22:25:22.072] mtd32 attached [2025-09-23 22:25:22.088] mtd28 attached [2025-09-23 22:25:22.088] mtd24 attached [2025-09-23 22:25:22.152] RTNETLINK answers: File exists [2025-09-23 22:25:22.152] ubi0:dml_code is mounted. [2025-09-23 22:25:22.203] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:25:22.203] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:25:22.203] ubi2:textures is mounted. [2025-09-23 22:25:22.203] ubi1:animations is mounted. [2025-09-23 22:25:22.203] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:25:22.203] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:25:22.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:25:22.203] data.LB_FadeInType0=100 [2025-09-23 22:25:22.203] data.CHLH_FadeInType0=0 [2025-09-23 22:25:22.203] data.WU_FadeInDelay=0 [2025-09-23 22:25:22.203] max_time_out=0 [2025-09-23 22:25:22.203] No splash screen [2025-09-23 22:25:22.203] stop dss Done [2025-09-23 22:25:22.251] /dev/mem opened. [2025-09-23 22:25:22.283] Memory mapped at address 0xffff9fb06000. [2025-09-23 22:25:22.283] Read at address 0x00600018 (0xffff9fb06018): 0x00000000 [2025-09-23 22:25:22.283] Write at address 0x00600018 (0xffff9fb06018): 0x00400040, readback 0x00400040 [2025-09-23 22:25:22.283] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:25:22.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:25:22.427] Loaded PowerVR consumer services. [2025-09-23 22:25:22.551] Waiting data available... [2025-09-23 22:25:22.551] 512+0 records in [2025-09-23 22:25:22.551] 512+0 records out [2025-09-23 22:25:22.582] Starting syslogd/klogd: done [2025-09-23 22:25:22.598] DML Start [2025-09-23 22:25:22.790] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:25:23.014] DML res1: 0 [2025-09-23 22:25:23.437] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:25:23.437] Read Success [2025-09-23 22:25:23.437] Verifying certificate... [2025-09-23 22:25:23.709] Verified OK [2025-09-23 22:25:23.741] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:25:25.395] Verified OK [2025-09-23 22:25:25.395] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:25:26.035] Verified OK [2025-09-23 22:25:26.056] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:25:28.692] fs.protected_hardlinks = 1 [2025-09-23 22:25:28.692] fs.protected_symlinks = 1 [2025-09-23 22:25:28.692] kernel.modules_disabled = 1 [2025-09-23 22:25:28.867] [2025-09-23 22:25:28.867] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:25:30.110] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:25:37.806] SBL1:1210.0.1.0 [2025-09-23 22:25:37.854] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:25:39.421] SBL2:1210.0.1.0 [2025-09-23 22:25:39.469] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:25:39.564] j-A [2025-09-23 22:25:46.919] The R5 Autosar Classic is running [2025-09-23 22:25:46.942] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:25:46.942] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:25:47.550] INIT: version 2.96 booting [2025-09-23 22:25:47.662] INIT: Entering runlevel: 5 [2025-09-23 22:25:47.822] mtd24 attached [2025-09-23 22:25:47.838] mtd32 attached [2025-09-23 22:25:47.838] mtd28 attached [2025-09-23 22:25:47.886] RTNETLINK answers: File exists [2025-09-23 22:25:47.951] ubi0:textures is mounted. [2025-09-23 22:25:47.951] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:25:47.951] ubi2:animations is mounted. [2025-09-23 22:25:47.951] ubi1:dml_code is mounted. [2025-09-23 22:25:47.951] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:25:47.951] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:25:47.951] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:25:47.951] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:25:47.951] data.LB_FadeInType0=100 [2025-09-23 22:25:47.951] data.CHLH_FadeInType0=0 [2025-09-23 22:25:47.951] data.WU_FadeInDelay=0 [2025-09-23 22:25:47.951] max_time_out=0 [2025-09-23 22:25:47.951] No splash screen [2025-09-23 22:25:47.951] stop dss Done [2025-09-23 22:25:47.999] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:25:47.999] /dev/mem opened. [2025-09-23 22:25:48.031] Memory mapped at address 0xffff975c6000. [2025-09-23 22:25:48.031] Read at address 0x00600018 (0xffff975c6018): 0x00000000 [2025-09-23 22:25:48.031] Write at address 0x00600018 (0xffff975c6018): 0x00400040, readback 0x00400040 [2025-09-23 22:25:48.031] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:25:48.239] Loaded PowerVR consumer services. [2025-09-23 22:25:48.255] Waiting data available... [2025-09-23 22:25:48.271] 512+0 records in [2025-09-23 22:25:48.287] 512+0 records out [2025-09-23 22:25:48.335] Starting syslogd/klogd: done [2025-09-23 22:25:48.351] DML Start [2025-09-23 22:25:48.542] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:25:48.750] DML res1: 0 [2025-09-23 22:25:49.206] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:25:49.206] Read Success [2025-09-23 22:25:49.206] Verifying certificate... [2025-09-23 22:25:49.494] Verified OK [2025-09-23 22:25:49.494] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:25:51.178] Verified OK [2025-09-23 22:25:51.178] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:25:51.769] Verified OK [2025-09-23 22:25:51.785] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:25:54.374] fs.protected_hardlinks = 1 [2025-09-23 22:25:54.374] fs.protected_symlinks = 1 [2025-09-23 22:25:54.374] kernel.modules_disabled = 1 [2025-09-23 22:25:54.566] [2025-09-23 22:25:54.566] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:25:55.866] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:26:03.574] SBL1:1210.0.1.0 [2025-09-23 22:26:03.606] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:26:05.189] SBL2:1210.0.1.0 [2025-09-23 22:26:05.221] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:26:05.332] j-A [2025-09-23 22:26:12.671] The R5 Autosar Classic is running [2025-09-23 22:26:12.702] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:26:12.702] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:26:13.310] INIT: version 2.96 booting [2025-09-23 22:26:13.422] INIT: Entering runlevel: 5 [2025-09-23 22:26:13.565] mtd32 attached [2025-09-23 22:26:13.581] mtd28 attached [2025-09-23 22:26:13.597] mtd24 attached [2025-09-23 22:26:13.645] RTNETLINK answers: File exists [2025-09-23 22:26:13.645] ubi0:dml_code is mounted. [2025-09-23 22:26:13.702] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:26:13.702] ubi1:animations is mounted. [2025-09-23 22:26:13.702] ubi2:textures is mounted. [2025-09-23 22:26:13.702] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:26:13.702] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:26:13.702] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:26:13.702] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:26:13.702] data.LB_FadeInType0=100 [2025-09-23 22:26:13.702] data.CHLH_FadeInType0=0 [2025-09-23 22:26:13.702] data.WU_FadeInDelay=0 [2025-09-23 22:26:13.702] max_time_out=0 [2025-09-23 22:26:13.702] No splash screen [2025-09-23 22:26:13.702] stop dss Done [2025-09-23 22:26:13.718] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:26:13.734] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:26:13.772] /dev/mem opened. [2025-09-23 22:26:13.772] Memory mapped at address 0xffff9f82e000. [2025-09-23 22:26:13.772] Read at address 0x00600018 (0xffff9f82e018): 0x00000000 [2025-09-23 22:26:13.772] Write at address 0x00600018 (0xffff9f82e018): 0x00400040, readback 0x00400040 [2025-09-23 22:26:13.915] Loaded PowerVR consumer services. [2025-09-23 22:26:14.036] Waiting data available... [2025-09-23 22:26:14.036] 512+0 records in [2025-09-23 22:26:14.036] 512+0 records out [2025-09-23 22:26:14.084] Starting syslogd/klogd: done [2025-09-23 22:26:14.100] DML Start [2025-09-23 22:26:14.244] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:26:14.468] DML res1: 0 [2025-09-23 22:26:15.004] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:26:15.004] Read Success [2025-09-23 22:26:15.004] Verifying certificate... [2025-09-23 22:26:15.244] Verified OK [2025-09-23 22:26:15.244] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:26:17.073] Verified OK [2025-09-23 22:26:17.073] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:26:17.580] Verified OK [2025-09-23 22:26:17.580] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:26:19.963] fs.protected_hardlinks = 1 [2025-09-23 22:26:19.979] fs.protected_symlinks = 1 [2025-09-23 22:26:19.979] kernel.modules_disabled = 1 [2025-09-23 22:26:20.171] [2025-09-23 22:26:20.171] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:26:21.529] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:26:29.323] SBL1:1210.0.1.0 [2025-09-23 22:26:29.354] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:26:30.937] SBL2:1210.0.1.0 [2025-09-23 22:26:30.969] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:26:31.080] j-A [2025-09-23 22:26:38.454] The R5 Autosar Classic is running [2025-09-23 22:26:38.454] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:26:38.454] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:26:39.062] INIT: version 2.96 booting [2025-09-23 22:26:39.157] INIT: Entering runlevel: 5 [2025-09-23 22:26:39.318] mtd28 attached [2025-09-23 22:26:39.334] mtd24 attached [2025-09-23 22:26:39.349] mtd32 attached [2025-09-23 22:26:39.382] ubi0:animations is mounted. [2025-09-23 22:26:39.398] RTNETLINK answers: File exists [2025-09-23 22:26:39.398] ubi1:textures is mounted. [2025-09-23 22:26:39.455] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:26:39.455] ubi2:dml_code is mounted. [2025-09-23 22:26:39.455] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:26:39.455] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:26:39.455] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:26:39.455] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:26:39.455] data.LB_FadeInType0=100 [2025-09-23 22:26:39.455] data.CHLH_FadeInType0=0 [2025-09-23 22:26:39.455] data.WU_FadeInDelay=0 [2025-09-23 22:26:39.455] max_time_out=0 [2025-09-23 22:26:39.455] No splash screen [2025-09-23 22:26:39.455] stop dss Done [2025-09-23 22:26:39.525] /dev/mem opened. [2025-09-23 22:26:39.525] Memory mapped at address 0xffffa553c000. [2025-09-23 22:26:39.525] Read at address 0x00600018 (0xffffa553c018): 0x00000000 [2025-09-23 22:26:39.525] Write at address 0x00600018 (0xffffa553c018): 0x00400040, readback 0x00400040 [2025-09-23 22:26:39.541] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:26:39.557] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:26:39.668] Loaded PowerVR consumer services. [2025-09-23 22:26:39.797] Waiting data available... [2025-09-23 22:26:39.797] 512+0 records in [2025-09-23 22:26:39.797] 512+0 records out [2025-09-23 22:26:39.845] Starting syslogd/klogd: done [2025-09-23 22:26:39.861] DML Start [2025-09-23 22:26:40.036] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:26:40.260] DML res1: 0 [2025-09-23 22:26:40.730] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:26:40.730] Read Success [2025-09-23 22:26:40.730] Verifying certificate... [2025-09-23 22:26:41.001] Verified OK [2025-09-23 22:26:41.017] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:26:42.821] Verified OK [2025-09-23 22:26:42.821] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:26:43.348] Verified OK [2025-09-23 22:26:43.364] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:26:45.811] fs.protected_hardlinks = 1 [2025-09-23 22:26:45.827] fs.protected_symlinks = 1 [2025-09-23 22:26:45.827] kernel.modules_disabled = 1 [2025-09-23 22:26:46.019] [2025-09-23 22:26:46.019] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:26:47.362] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:26:55.055] SBL1:1210.0.1.0 [2025-09-23 22:26:55.103] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:26:56.670] SBL2:1210.0.1.0 [2025-09-23 22:26:56.702] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:26:56.813] j-A [2025-09-23 22:27:04.187] The R5 Autosar Classic is running [2025-09-23 22:27:04.187] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:27:04.187] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:27:04.795] INIT: version 2.96 booting [2025-09-23 22:27:04.906] INIT: Entering runlevel: 5 [2025-09-23 22:27:05.051] mtd24 attached [2025-09-23 22:27:05.067] mtd28 attached [2025-09-23 22:27:05.083] mtd32 attached [2025-09-23 22:27:05.186] ubi0:textures is mounted. [2025-09-23 22:27:05.186] RTNETLINK answers: File exists [2025-09-23 22:27:05.186] ubi1:animations is mounted. [2025-09-23 22:27:05.186] ubi2:dml_code is mounted. [2025-09-23 22:27:05.186] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:27:05.186] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:27:05.186] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:27:05.186] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:27:05.186] data.LB_FadeInType0=100 [2025-09-23 22:27:05.186] data.CHLH_FadeInType0=0 [2025-09-23 22:27:05.186] data.WU_FadeInDelay=0 [2025-09-23 22:27:05.186] max_time_out=0 [2025-09-23 22:27:05.186] No splash screen [2025-09-23 22:27:05.186] stop dss Done [2025-09-23 22:27:05.186] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:27:05.258] /dev/mem opened. [2025-09-23 22:27:05.258] Memory mapped at address 0xffffb1141000. [2025-09-23 22:27:05.258] Read at address 0x00600018 (0xffffb1141018): 0x00000000 [2025-09-23 22:27:05.258] Write at address 0x00600018 (0xffffb1141018): 0x00400040, readback 0x00400040 [2025-09-23 22:27:05.290] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:27:05.306] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:27:05.465] Loaded PowerVR consumer services. [2025-09-23 22:27:05.513] 512+0 records in [2025-09-23 22:27:05.513] 512+0 records out [2025-09-23 22:27:05.529] Waiting data available... [2025-09-23 22:27:05.545] Starting syslogd/klogd: done [2025-09-23 22:27:05.561] DML Start [2025-09-23 22:27:05.721] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:27:05.977] DML res1: 0 [2025-09-23 22:27:06.424] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:27:06.424] Read Success [2025-09-23 22:27:06.424] Verifying certificate... [2025-09-23 22:27:06.647] Verified OK [2025-09-23 22:27:06.663] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:27:08.222] Verified OK [2025-09-23 22:27:08.222] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:27:08.904] Verified OK [2025-09-23 22:27:08.904] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:27:11.574] fs.protected_hardlinks = 1 [2025-09-23 22:27:11.590] fs.protected_symlinks = 1 [2025-09-23 22:27:11.590] kernel.modules_disabled = 1 [2025-09-23 22:27:11.798] [2025-09-23 22:27:11.798] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:27:13.013] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:27:20.801] SBL1:1210.0.1.0 [2025-09-23 22:27:20.849] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:27:22.415] SBL2:1210.0.1.0 [2025-09-23 22:27:22.447] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 22:27:22.560] j-A [2025-09-23 22:27:29.935] The R5 Autosar Classic is running [2025-09-23 22:27:29.935] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:27:29.935] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:27:30.542] INIT: version 2.96 booting [2025-09-23 22:27:30.654] INIT: Entering runlevel: 5 [2025-09-23 22:27:30.798] mtd24 attached [2025-09-23 22:27:30.814] mtd32 attached [2025-09-23 22:27:30.830] mtd28 attached [2025-09-23 22:27:30.861] ubi0:textures is mounted. [2025-09-23 22:27:30.914] RTNETLINK answers: File exists [2025-09-23 22:27:30.914] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:27:30.914] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:27:30.914] ubi2:animations is mounted. [2025-09-23 22:27:30.914] ubi1:dml_code is mounted. [2025-09-23 22:27:30.914] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:27:30.914] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:27:30.914] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:27:30.914] data.LB_FadeInType0=100 [2025-09-23 22:27:30.935] data.CHLH_FadeInType0=0 [2025-09-23 22:27:30.935] data.WU_FadeInDelay=0 [2025-09-23 22:27:30.935] max_time_out=0 [2025-09-23 22:27:30.935] No splash screen [2025-09-23 22:27:30.935] stop dss Done [2025-09-23 22:27:30.983] /dev/mem opened. [2025-09-23 22:27:30.983] Memory mapped at address 0xffff96397000. [2025-09-23 22:27:31.015] Read at address 0x00600018 (0xffff96397018): 0x00000000 [2025-09-23 22:27:31.015] Write at address 0x00600018 (0xffff96397018): 0x00400040, readback 0x00400040 [2025-09-23 22:27:31.015] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:27:31.015] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:27:31.158] Loaded PowerVR consumer services. [2025-09-23 22:27:31.255] 512+0 records in [2025-09-23 22:27:31.255] 512+0 records out [2025-09-23 22:27:31.271] Waiting data available... [2025-09-23 22:27:31.303] Starting syslogd/klogd: done [2025-09-23 22:27:31.319] DML Start [2025-09-23 22:27:31.494] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:27:31.734] DML res1: 0 [2025-09-23 22:27:32.156] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:27:32.156] Read Success [2025-09-23 22:27:32.156] Verifying certificate... [2025-09-23 22:27:32.396] Verified OK [2025-09-23 22:27:32.412] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:27:34.166] Verified OK [2025-09-23 22:27:34.166] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:27:34.742] Verified OK [2025-09-23 22:27:34.742] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:27:37.332] fs.protected_hardlinks = 1 [2025-09-23 22:27:37.332] fs.protected_symlinks = 1 [2025-09-23 22:27:37.348] kernel.modules_disabled = 1 [2025-09-23 22:27:37.540] [2025-09-23 22:27:37.540] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:27:38.825] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:27:46.537] SBL1:1210.0.1.0 [2025-09-23 22:27:46.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:27:48.151] SBL2:1210.0.1.0 [2025-09-23 22:27:48.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:27:48.296] j-A [2025-09-23 22:27:55.650] The R5 Autosar Classic is running [2025-09-23 22:27:55.674] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:27:55.674] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:27:56.282] INIT: version 2.96 booting [2025-09-23 22:27:56.393] INIT: Entering runlevel: 5 [2025-09-23 22:27:56.554] mtd32 attached [2025-09-23 22:27:56.554] mtd28 attached [2025-09-23 22:27:56.570] mtd24 attached [2025-09-23 22:27:56.617] RTNETLINK answers: File exists [2025-09-23 22:27:56.617] ubi1:animations is mounted. [2025-09-23 22:27:56.683] ubi0:dml_code is mounted. [2025-09-23 22:27:56.683] ubi2:textures is mounted. [2025-09-23 22:27:56.683] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:27:56.683] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:27:56.683] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:27:56.683] data.LB_FadeInType0=100 [2025-09-23 22:27:56.683] data.CHLH_FadeInType0=0 [2025-09-23 22:27:56.683] data.WU_FadeInDelay=0 [2025-09-23 22:27:56.683] max_time_out=0 [2025-09-23 22:27:56.683] No splash screen [2025-09-23 22:27:56.683] stop dss Done [2025-09-23 22:27:56.683] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:27:56.683] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:27:56.747] /dev/mem opened. [2025-09-23 22:27:56.747] Memory mapped at address 0xffff89bd8000. [2025-09-23 22:27:56.747] Read at address 0x00600018 (0xffff89bd8018): 0x00000000 [2025-09-23 22:27:56.747] Write at address 0x00600018 (0xffff89bd8018): 0x00400040, readback 0x00400040 [2025-09-23 22:27:56.795] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:27:56.811] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:27:56.971] Loaded PowerVR consumer services. [2025-09-23 22:27:57.003] 512+0 records in [2025-09-23 22:27:57.003] 512+0 records out [2025-09-23 22:27:57.019] Waiting data available... [2025-09-23 22:27:57.051] Starting syslogd/klogd: done [2025-09-23 22:27:57.083] DML Start [2025-09-23 22:27:57.243] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:27:57.482] DML res1: 0 [2025-09-23 22:27:57.909] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:27:57.909] Read Success [2025-09-23 22:27:57.909] Verifying certificate... [2025-09-23 22:27:58.149] Verified OK [2025-09-23 22:27:58.165] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:27:59.774] Verified OK [2025-09-23 22:27:59.774] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:28:00.429] Verified OK [2025-09-23 22:28:00.445] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:28:03.067] fs.protected_hardlinks = 1 [2025-09-23 22:28:03.067] fs.protected_symlinks = 1 [2025-09-23 22:28:03.083] kernel.modules_disabled = 1 [2025-09-23 22:28:03.275] [2025-09-23 22:28:03.275] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:28:04.570] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:28:12.285] SBL1:1210.0.1.0 [2025-09-23 22:28:12.333] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:28:13.900] SBL2:1210.0.1.0 [2025-09-23 22:28:13.932] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:28:14.043] j-A [2025-09-23 22:28:21.418] The R5 Autosar Classic is running [2025-09-23 22:28:21.418] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:28:21.418] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:28:22.025] INIT: version 2.96 booting [2025-09-23 22:28:22.137] INIT: Entering runlevel: 5 [2025-09-23 22:28:22.281] mtd24 attached [2025-09-23 22:28:22.297] mtd28 attached [2025-09-23 22:28:22.313] mtd32 attached [2025-09-23 22:28:22.345] ubi0:textures is mounted. [2025-09-23 22:28:22.417] RTNETLINK answers: File exists [2025-09-23 22:28:22.417] ubi1:animations is mounted. [2025-09-23 22:28:22.417] ubi2:dml_code is mounted. [2025-09-23 22:28:22.417] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:28:22.417] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:28:22.417] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:28:22.417] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:28:22.417] data.LB_FadeInType0=100 [2025-09-23 22:28:22.417] data.CHLH_FadeInType0=0 [2025-09-23 22:28:22.417] data.WU_FadeInDelay=0 [2025-09-23 22:28:22.417] max_time_out=0 [2025-09-23 22:28:22.417] No splash screen [2025-09-23 22:28:22.417] stop dss Done [2025-09-23 22:28:22.417] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:28:22.481] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:28:22.481] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:28:22.481] /dev/mem opened. [2025-09-23 22:28:22.481] Memory mapped at address 0xffffbf3fa000. [2025-09-23 22:28:22.481] Read at address 0x00600018 (0xffffbf3fa018): 0x00000000 [2025-09-23 22:28:22.481] Write at address 0x00600018 (0xffffbf3fa018): 0x00400040, readback 0x00400040 [2025-09-23 22:28:22.641] Loaded PowerVR consumer services. [2025-09-23 22:28:22.752] Waiting data available... [2025-09-23 22:28:22.768] 512+0 records in [2025-09-23 22:28:22.768] 512+0 records out [2025-09-23 22:28:22.784] Starting syslogd/klogd: done [2025-09-23 22:28:22.816] DML Start [2025-09-23 22:28:23.008] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:28:23.216] DML res1: 0 [2025-09-23 22:28:23.600] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:28:23.621] Read Success [2025-09-23 22:28:23.621] Verifying certificate... [2025-09-23 22:28:23.861] Verified OK [2025-09-23 22:28:23.877] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:28:25.598] Verified OK [2025-09-23 22:28:25.598] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:28:26.157] Verified OK [2025-09-23 22:28:26.157] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:28:28.699] fs.protected_hardlinks = 1 [2025-09-23 22:28:28.699] fs.protected_symlinks = 1 [2025-09-23 22:28:28.715] kernel.modules_disabled = 1 [2025-09-23 22:28:28.922] [2025-09-23 22:28:28.922] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:28:30.271] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:28:38.026] SBL1:1210.0.1.0 [2025-09-23 22:28:38.058] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:28:39.640] SBL2:1210.0.1.0 [2025-09-23 22:28:39.672] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:28:39.784] j-A [2025-09-23 22:28:47.124] The R5 Autosar Classic is running [2025-09-23 22:28:47.149] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:28:47.149] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:28:47.757] INIT: version 2.96 booting [2025-09-23 22:28:47.868] INIT: Entering runlevel: 5 [2025-09-23 22:28:48.013] mtd24 attached [2025-09-23 22:28:48.029] mtd28 attached [2025-09-23 22:28:48.045] mtd32 attached [2025-09-23 22:28:48.061] ubi0:textures is mounted. [2025-09-23 22:28:48.093] ubi2:dml_code is mounted. [2025-09-23 22:28:48.093] RTNETLINK answers: File exists [2025-09-23 22:28:48.154] ubi1:animations is mounted. [2025-09-23 22:28:48.154] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:28:48.154] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:28:48.154] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:28:48.154] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:28:48.154] data.LB_FadeInType0=100 [2025-09-23 22:28:48.154] data.CHLH_FadeInType0=0 [2025-09-23 22:28:48.154] data.WU_FadeInDelay=0 [2025-09-23 22:28:48.154] max_time_out=0 [2025-09-23 22:28:48.154] No splash screen [2025-09-23 22:28:48.154] stop dss Done [2025-09-23 22:28:48.154] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:28:48.223] /dev/mem opened. [2025-09-23 22:28:48.223] Memory mapped at address 0xffff98210000. [2025-09-23 22:28:48.223] Read at address 0x00600018 (0xffff98210018): 0x00000000 [2025-09-23 22:28:48.223] Write at address 0x00600018 (0xffff98210018): 0x00400040, readback 0x00400040 [2025-09-23 22:28:48.239] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:28:48.255] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:28:48.383] Loaded PowerVR consumer services. [2025-09-23 22:28:48.480] Waiting data available... [2025-09-23 22:28:48.495] 512+0 records in [2025-09-23 22:28:48.495] 512+0 records out [2025-09-23 22:28:48.511] Starting syslogd/klogd: done [2025-09-23 22:28:48.543] DML Start [2025-09-23 22:28:48.687] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:28:48.943] DML res1: 0 [2025-09-23 22:28:49.375] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:28:49.396] Read Success [2025-09-23 22:28:49.396] Verifying certificate... [2025-09-23 22:28:49.636] Verified OK [2025-09-23 22:28:49.636] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:28:51.378] Verified OK [2025-09-23 22:28:51.378] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:28:51.949] Verified OK [2025-09-23 22:28:51.949] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:28:54.411] fs.protected_hardlinks = 1 [2025-09-23 22:28:54.411] fs.protected_symlinks = 1 [2025-09-23 22:28:54.411] kernel.modules_disabled = 1 [2025-09-23 22:28:54.602] [2025-09-23 22:28:54.602] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:28:56.037] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:29:03.760] SBL1:1210.0.1.0 [2025-09-23 22:29:03.808] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:29:05.375] SBL2:1210.0.1.0 [2025-09-23 22:29:05.406] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:29:05.518] j-A [2025-09-23 22:29:12.894] The R5 Autosar Classic is running [2025-09-23 22:29:12.894] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:29:12.894] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:29:13.501] INIT: version 2.96 booting [2025-09-23 22:29:13.597] INIT: Entering runlevel: 5 [2025-09-23 22:29:13.756] mtd28 attached [2025-09-23 22:29:13.772] mtd24 attached [2025-09-23 22:29:13.788] mtd32 attached [2025-09-23 22:29:13.820] ubi0:animations is mounted. [2025-09-23 22:29:13.836] RTNETLINK answers: File exists [2025-09-23 22:29:13.893] ubi2:dml_code is mounted. [2025-09-23 22:29:13.893] ubi1:textures is mounted. [2025-09-23 22:29:13.893] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:29:13.893] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:29:13.893] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:29:13.893] data.LB_FadeInType0=100 [2025-09-23 22:29:13.893] data.CHLH_FadeInType0=0 [2025-09-23 22:29:13.893] data.WU_FadeInDelay=0 [2025-09-23 22:29:13.893] max_time_out=0 [2025-09-23 22:29:13.893] No splash screen [2025-09-23 22:29:13.893] stop dss Done [2025-09-23 22:29:13.893] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:29:13.893] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:29:13.981] /dev/mem opened. [2025-09-23 22:29:13.981] Memory mapped at address 0xffffa03e6000. [2025-09-23 22:29:13.981] Read at address 0x00600018 (0xffffa03e6018): 0x00000000 [2025-09-23 22:29:13.981] Write at address 0x00600018 (0xffffa03e6018): 0x00400040, readback 0x00400040 [2025-09-23 22:29:13.981] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:29:13.981] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:29:14.204] Loaded PowerVR consumer services. [2025-09-23 22:29:14.220] Waiting data available... [2025-09-23 22:29:14.236] 512+0 records in [2025-09-23 22:29:14.236] 512+0 records out [2025-09-23 22:29:14.285] Starting syslogd/klogd: done [2025-09-23 22:29:14.301] DML Start [2025-09-23 22:29:14.460] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:29:14.684] DML res1: 0 [2025-09-23 22:29:15.163] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:29:15.163] Read Success [2025-09-23 22:29:15.163] Verifying certificate... [2025-09-23 22:29:15.435] Verified OK [2025-09-23 22:29:15.451] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:29:17.176] Verified OK [2025-09-23 22:29:17.176] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:29:17.703] Verified OK [2025-09-23 22:29:17.703] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:29:20.150] fs.protected_hardlinks = 1 [2025-09-23 22:29:20.166] fs.protected_symlinks = 1 [2025-09-23 22:29:20.166] kernel.modules_disabled = 1 [2025-09-23 22:29:20.373] [2025-09-23 22:29:20.373] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:29:21.811] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:29:29.514] SBL1:1210.0.1.0 [2025-09-23 22:29:29.546] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:29:31.129] SBL2:1210.0.1.0 [2025-09-23 22:29:31.160] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:29:31.272] j-A [2025-09-23 22:29:38.612] The R5 Autosar Classic is running [2025-09-23 22:29:38.637] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:29:38.637] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:29:39.244] INIT: version 2.96 booting [2025-09-23 22:29:39.356] INIT: Entering runlevel: 5 [2025-09-23 22:29:39.516] mtd24 attached [2025-09-23 22:29:39.516] mtd32 attached [2025-09-23 22:29:39.532] mtd28 attached [2025-09-23 22:29:39.564] ubi0:textures is mounted. [2025-09-23 22:29:39.580] RTNETLINK answers: File exists [2025-09-23 22:29:39.640] ubi1:dml_code is mounted. [2025-09-23 22:29:39.640] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:29:39.640] ubi2:animations is mounted. [2025-09-23 22:29:39.640] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:29:39.640] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:29:39.640] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:29:39.640] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:29:39.640] data.LB_FadeInType0=100 [2025-09-23 22:29:39.640] data.CHLH_FadeInType0=0 [2025-09-23 22:29:39.640] data.WU_FadeInDelay=0 [2025-09-23 22:29:39.640] max_time_out=0 [2025-09-23 22:29:39.640] No splash screen [2025-09-23 22:29:39.640] stop dss Done [2025-09-23 22:29:39.687] /dev/mem opened. [2025-09-23 22:29:39.687] Memory mapped at address 0xffffa1133000. [2025-09-23 22:29:39.720] Read at address 0x00600018 (0xffffa1133018): 0x00000000 [2025-09-23 22:29:39.720] Write at address 0x00600018 (0xffffa1133018): 0x00400040, readback 0x00400040 [2025-09-23 22:29:39.720] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:29:39.720] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:29:39.959] Loaded PowerVR consumer services. [2025-09-23 22:29:40.018] Waiting data available... [2025-09-23 22:29:40.018] 512+0 records in [2025-09-23 22:29:40.018] 512+0 records out [2025-09-23 22:29:40.051] Starting syslogd/klogd: done [2025-09-23 22:29:40.067] DML Start [2025-09-23 22:29:40.258] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:29:40.498] DML res1: 0 [2025-09-23 22:29:40.877] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:29:40.877] Read Success [2025-09-23 22:29:40.877] Verifying certificate... [2025-09-23 22:29:41.148] Verified OK [2025-09-23 22:29:41.164] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:29:42.844] Verified OK [2025-09-23 22:29:42.844] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:29:43.527] Verified OK [2025-09-23 22:29:43.527] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:29:46.165] fs.protected_hardlinks = 1 [2025-09-23 22:29:46.165] fs.protected_symlinks = 1 [2025-09-23 22:29:46.181] kernel.modules_disabled = 1 [2025-09-23 22:29:46.373] [2025-09-23 22:29:46.373] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:29:47.555] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:29:55.239] SBL1:1210.0.1.0 [2025-09-23 22:29:55.287] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:29:56.854] SBL2:1210.0.1.0 [2025-09-23 22:29:56.886] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:29:56.998] j-A [2025-09-23 22:30:04.373] The R5 Autosar Classic is running [2025-09-23 22:30:04.373] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:30:04.373] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:30:04.981] INIT: version 2.96 booting [2025-09-23 22:30:05.093] INIT: Entering runlevel: 5 [2025-09-23 22:30:05.252] mtd28 attached [2025-09-23 22:30:05.252] mtd24 attached [2025-09-23 22:30:05.268] mtd32 attached [2025-09-23 22:30:05.301] ubi1:textures is mounted. [2025-09-23 22:30:05.301] ubi0:animations is mounted. [2025-09-23 22:30:05.375] ubi2:dml_code is mounted. [2025-09-23 22:30:05.375] RTNETLINK answers: File exists [2025-09-23 22:30:05.375] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:30:05.375] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:30:05.375] data.LB_FadeInType0=100 [2025-09-23 22:30:05.375] data.CHLH_FadeInType0=0 [2025-09-23 22:30:05.375] data.WU_FadeInDelay=0 [2025-09-23 22:30:05.375] max_time_out=0 [2025-09-23 22:30:05.375] No splash screen [2025-09-23 22:30:05.375] stop dss Done [2025-09-23 22:30:05.375] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:30:05.375] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:30:05.375] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:30:05.442] /dev/mem opened. [2025-09-23 22:30:05.442] Memory mapped at address 0xffffa7967000. [2025-09-23 22:30:05.442] Read at address 0x00600018 (0xffffa7967018): 0x00000000 [2025-09-23 22:30:05.442] Write at address 0x00600018 (0xffffa7967018): 0x00400040, readback 0x00400040 [2025-09-23 22:30:05.474] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:30:05.505] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:30:05.650] Loaded PowerVR consumer services. [2025-09-23 22:30:05.682] Waiting data available... [2025-09-23 22:30:05.697] 512+0 records in [2025-09-23 22:30:05.697] 512+0 records out [2025-09-23 22:30:05.729] Starting syslogd/klogd: done [2025-09-23 22:30:05.745] DML Start [2025-09-23 22:30:05.937] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:30:06.113] DML res1: 0 [2025-09-23 22:30:06.593] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:30:06.593] Read Success [2025-09-23 22:30:06.609] Verifying certificate... [2025-09-23 22:30:06.817] Verified OK [2025-09-23 22:30:06.849] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:30:08.444] Verified OK [2025-09-23 22:30:08.444] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:30:09.105] Verified OK [2025-09-23 22:30:09.105] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:30:11.792] fs.protected_hardlinks = 1 [2025-09-23 22:30:11.792] fs.protected_symlinks = 1 [2025-09-23 22:30:11.808] kernel.modules_disabled = 1 [2025-09-23 22:30:12.016] [2025-09-23 22:30:12.016] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:30:13.208] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:30:20.996] SBL1:1210.0.1.0 [2025-09-23 22:30:21.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:30:22.610] SBL2:1210.0.1.0 [2025-09-23 22:30:22.642] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:30:22.755] j-A [2025-09-23 22:30:30.129] The R5 Autosar Classic is running [2025-09-23 22:30:30.129] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:30:30.129] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:30:30.737] INIT: version 2.96 booting [2025-09-23 22:30:30.848] INIT: Entering runlevel: 5 [2025-09-23 22:30:30.992] mtd24 attached [2025-09-23 22:30:31.008] mtd32 attached [2025-09-23 22:30:31.024] mtd28 attached [2025-09-23 22:30:31.056] ubi0:textures is mounted. [2025-09-23 22:30:31.072] RTNETLINK answers: File exists [2025-09-23 22:30:31.126] ubi1:dml_code is mounted. [2025-09-23 22:30:31.126] ubi2:animations is mounted. [2025-09-23 22:30:31.126] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:30:31.126] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:30:31.126] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:30:31.126] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:30:31.126] data.LB_FadeInType0=100 [2025-09-23 22:30:31.126] data.CHLH_FadeInType0=0 [2025-09-23 22:30:31.126] data.WU_FadeInDelay=0 [2025-09-23 22:30:31.126] max_time_out=0 [2025-09-23 22:30:31.126] No splash screen [2025-09-23 22:30:31.126] stop dss Done [2025-09-23 22:30:31.126] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:30:31.158] /dev/mem opened. [2025-09-23 22:30:31.158] Memory mapped at address 0xffff8f130000. [2025-09-23 22:30:31.184] Read at address 0x00600018 (0xffff8f130018): 0x00000000 [2025-09-23 22:30:31.184] Write at address 0x00600018 (0xffff8f130018): 0x00400040, readback 0x00400040 [2025-09-23 22:30:31.215] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:30:31.231] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:30:31.328] Loaded PowerVR consumer services. [2025-09-23 22:30:31.440] Waiting data available... [2025-09-23 22:30:31.456] 512+0 records in [2025-09-23 22:30:31.456] 512+0 records out [2025-09-23 22:30:31.472] Starting syslogd/klogd: done [2025-09-23 22:30:31.488] DML Start [2025-09-23 22:30:31.647] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:30:31.840] DML res1: 0 [2025-09-23 22:30:32.394] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:30:32.394] Read Success [2025-09-23 22:30:32.394] Verifying certificate... [2025-09-23 22:30:32.650] Verified OK [2025-09-23 22:30:32.666] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:30:34.302] Verified OK [2025-09-23 22:30:34.302] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:30:34.957] Verified OK [2025-09-23 22:30:34.958] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:30:37.580] fs.protected_hardlinks = 1 [2025-09-23 22:30:37.580] fs.protected_symlinks = 1 [2025-09-23 22:30:37.596] kernel.modules_disabled = 1 [2025-09-23 22:30:37.788] [2025-09-23 22:30:37.788] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:30:38.947] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:30:46.742] SBL1:1210.0.1.0 [2025-09-23 22:30:46.790] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:30:48.356] SBL2:1210.0.1.0 [2025-09-23 22:30:48.388] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 22:30:48.500] j-A [2025-09-23 22:30:55.854] The R5 Autosar Classic is running [2025-09-23 22:30:55.854] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:30:55.875] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:30:56.482] INIT: version 2.96 booting [2025-09-23 22:30:56.594] INIT: Entering runlevel: 5 [2025-09-23 22:30:56.739] mtd24 attached [2025-09-23 22:30:56.754] mtd28 attached [2025-09-23 22:30:56.770] mtd32 attached [2025-09-23 22:30:56.850] RTNETLINK answers: File exists [2025-09-23 22:30:56.850] ubi0:textures is mounted. [2025-09-23 22:30:56.850] ubi1:animations is mounted. [2025-09-23 22:30:56.850] ubi2:dml_code is mounted. [2025-09-23 22:30:56.850] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:30:56.850] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:30:56.850] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:30:56.883] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:30:56.883] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:30:56.883] data.LB_FadeInType0=100 [2025-09-23 22:30:56.883] data.CHLH_FadeInType0=0 [2025-09-23 22:30:56.883] data.WU_FadeInDelay=0 [2025-09-23 22:30:56.883] max_time_out=0 [2025-09-23 22:30:56.883] No splash screen [2025-09-23 22:30:56.883] stop dss Done [2025-09-23 22:30:56.931] /dev/mem opened. [2025-09-23 22:30:56.931] Memory mapped at address 0xffffa912a000. [2025-09-23 22:30:56.963] Read at address 0x00600018 (0xffffa912a018): 0x00000000 [2025-09-23 22:30:56.963] Write at address 0x00600018 (0xffffa912a018): 0x00400040, readback 0x00400040 [2025-09-23 22:30:56.963] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:30:56.963] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:30:57.059] Loaded PowerVR consumer services. [2025-09-23 22:30:57.203] 512+0 records in [2025-09-23 22:30:57.203] 512+0 records out [2025-09-23 22:30:57.219] Waiting data available... [2025-09-23 22:30:57.234] Starting syslogd/klogd: done [2025-09-23 22:30:57.251] DML Start [2025-09-23 22:30:57.458] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:30:57.683] DML res1: 0 [2025-09-23 22:30:58.123] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:30:58.123] Read Success [2025-09-23 22:30:58.123] Verifying certificate... [2025-09-23 22:30:58.362] Verified OK [2025-09-23 22:30:58.378] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:31:00.202] Verified OK [2025-09-23 22:31:00.202] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:31:00.755] Verified OK [2025-09-23 22:31:00.755] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:31:03.201] fs.protected_hardlinks = 1 [2025-09-23 22:31:03.201] fs.protected_symlinks = 1 [2025-09-23 22:31:03.217] kernel.modules_disabled = 1 [2025-09-23 22:31:03.409] [2025-09-23 22:31:03.409] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:31:04.751] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:31:12.513] SBL1:1210.0.1.0 [2025-09-23 22:31:12.561] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:31:14.127] SBL2:1210.0.1.0 [2025-09-23 22:31:14.159] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 22:31:14.271] j-A [2025-09-23 22:31:21.645] The R5 Autosar Classic is running [2025-09-23 22:31:21.645] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:31:21.645] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:31:22.252] INIT: version 2.96 booting [2025-09-23 22:31:22.365] INIT: Entering runlevel: 5 [2025-09-23 22:31:22.524] mtd24 attached [2025-09-23 22:31:22.524] mtd28 attached [2025-09-23 22:31:22.540] mtd32 attached [2025-09-23 22:31:22.588] RTNETLINK answers: File exists [2025-09-23 22:31:22.588] ubi0:textures is mounted. [2025-09-23 22:31:22.651] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:31:22.651] ubi1:animations is mounted. [2025-09-23 22:31:22.651] ubi2:dml_code is mounted. [2025-09-23 22:31:22.651] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:31:22.651] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:31:22.651] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:31:22.651] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:31:22.651] data.LB_FadeInType0=100 [2025-09-23 22:31:22.651] data.CHLH_FadeInType0=0 [2025-09-23 22:31:22.651] data.WU_FadeInDelay=0 [2025-09-23 22:31:22.651] max_time_out=0 [2025-09-23 22:31:22.651] No splash screen [2025-09-23 22:31:22.651] stop dss Done [2025-09-23 22:31:22.715] /dev/mem opened. [2025-09-23 22:31:22.715] Memory mapped at address 0xffff8f229000. [2025-09-23 22:31:22.715] Read at address 0x00600018 (0xffff8f229018): 0x00000000 [2025-09-23 22:31:22.715] Write at address 0x00600018 (0xffff8f229018): 0x00400040, readback 0x00400040 [2025-09-23 22:31:22.762] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:31:22.762] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:31:22.954] Loaded PowerVR consumer services. [2025-09-23 22:31:22.986] 512+0 records in [2025-09-23 22:31:23.002] 512+0 records out [2025-09-23 22:31:23.018] Waiting data available... [2025-09-23 22:31:23.034] Starting syslogd/klogd: done [2025-09-23 22:31:23.050] DML Start [2025-09-23 22:31:23.242] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:31:23.433] DML res1: 0 [2025-09-23 22:31:23.860] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:31:23.860] Read Success [2025-09-23 22:31:23.860] Verifying certificate... [2025-09-23 22:31:24.116] Verified OK [2025-09-23 22:31:24.132] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:31:25.907] Verified OK [2025-09-23 22:31:25.907] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:31:26.446] Verified OK [2025-09-23 22:31:26.446] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:31:28.812] fs.protected_hardlinks = 1 [2025-09-23 22:31:28.812] fs.protected_symlinks = 1 [2025-09-23 22:31:28.828] kernel.modules_disabled = 1 [2025-09-23 22:31:29.020] [2025-09-23 22:31:29.020] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:31:30.553] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:31:38.269] SBL1:1210.0.1.0 [2025-09-23 22:31:38.317] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:31:39.883] SBL2:1210.0.1.0 [2025-09-23 22:31:39.915] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:31:40.028] j-A [2025-09-23 22:31:47.382] The R5 Autosar Classic is running [2025-09-23 22:31:47.382] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:31:47.403] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:31:48.010] INIT: version 2.96 booting [2025-09-23 22:31:48.122] INIT: Entering runlevel: 5 [2025-09-23 22:31:48.282] mtd24 attached [2025-09-23 22:31:48.282] mtd28 attached [2025-09-23 22:31:48.297] mtd32 attached [2025-09-23 22:31:48.329] ubi0:textures is mounted. [2025-09-23 22:31:48.345] RTNETLINK answers: File exists [2025-09-23 22:31:48.401] ubi1:animations is mounted. [2025-09-23 22:31:48.401] ubi2:dml_code is mounted. [2025-09-23 22:31:48.401] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:31:48.401] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:31:48.401] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:31:48.401] data.LB_FadeInType0=100 [2025-09-23 22:31:48.401] data.CHLH_FadeInType0=0 [2025-09-23 22:31:48.401] data.WU_FadeInDelay=0 [2025-09-23 22:31:48.401] max_time_out=0 [2025-09-23 22:31:48.401] No splash screen [2025-09-23 22:31:48.401] stop dss Done [2025-09-23 22:31:48.401] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:31:48.401] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:31:48.434] /dev/mem opened. [2025-09-23 22:31:48.434] Memory mapped at address 0xffffbd92e000. [2025-09-23 22:31:48.470] Read at address 0x00600018 (0xffffbd92e018): 0x00000000 [2025-09-23 22:31:48.470] Write at address 0x00600018 (0xffffbd92e018): 0x00400040, readback 0x00400040 [2025-09-23 22:31:48.470] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:31:48.470] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:31:48.645] Loaded PowerVR consumer services. [2025-09-23 22:31:48.725] Waiting data available... [2025-09-23 22:31:48.741] 512+0 records in [2025-09-23 22:31:48.741] 512+0 records out [2025-09-23 22:31:48.757] Starting syslogd/klogd: done [2025-09-23 22:31:48.773] DML Start [2025-09-23 22:31:48.933] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:31:49.141] DML res1: 0 [2025-09-23 22:31:49.631] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:31:49.631] Read Success [2025-09-23 22:31:49.631] Verifying certificate... [2025-09-23 22:31:49.855] Verified OK [2025-09-23 22:31:49.855] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:31:51.558] Verified OK [2025-09-23 22:31:51.558] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:31:52.208] Verified OK [2025-09-23 22:31:52.208] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:31:54.847] fs.protected_hardlinks = 1 [2025-09-23 22:31:54.847] fs.protected_symlinks = 1 [2025-09-23 22:31:54.862] kernel.modules_disabled = 1 [2025-09-23 22:31:55.054] [2025-09-23 22:31:55.054] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:31:56.322] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:32:04.020] SBL1:1210.0.1.0 [2025-09-23 22:32:04.052] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:32:05.635] SBL2:1210.0.1.0 [2025-09-23 22:32:05.667] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:32:05.779] j-A [2025-09-23 22:32:13.117] The R5 Autosar Classic is running [2025-09-23 22:32:13.148] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:32:13.148] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:32:13.756] INIT: version 2.96 booting [2025-09-23 22:32:13.868] INIT: Entering runlevel: 5 [2025-09-23 22:32:14.012] mtd24 attached [2025-09-23 22:32:14.028] mtd32 attached [2025-09-23 22:32:14.044] mtd28 attached [2025-09-23 22:32:14.060] ubi0:textures is mounted. [2025-09-23 22:32:14.092] RTNETLINK answers: File exists [2025-09-23 22:32:14.092] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:32:14.143] ubi1:dml_code is mounted. [2025-09-23 22:32:14.143] ubi2:animations is mounted. [2025-09-23 22:32:14.143] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:32:14.143] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:32:14.143] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:32:14.143] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:32:14.143] data.LB_FadeInType0=100 [2025-09-23 22:32:14.143] data.CHLH_FadeInType0=0 [2025-09-23 22:32:14.143] data.WU_FadeInDelay=0 [2025-09-23 22:32:14.143] max_time_out=0 [2025-09-23 22:32:14.143] No splash screen [2025-09-23 22:32:14.143] stop dss Done [2025-09-23 22:32:14.231] /dev/mem opened. [2025-09-23 22:32:14.231] Memory mapped at address 0xffff8be34000. [2025-09-23 22:32:14.231] Read at address 0x00600018 (0xffff8be34018): 0x00000000 [2025-09-23 22:32:14.231] Write at address 0x00600018 (0xffff8be34018): 0x00400040, readback 0x00400040 [2025-09-23 22:32:14.231] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:32:14.231] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:32:14.439] Loaded PowerVR consumer services. [2025-09-23 22:32:14.511] Waiting data available... [2025-09-23 22:32:14.511] 512+0 records in [2025-09-23 22:32:14.511] 512+0 records out [2025-09-23 22:32:14.527] Starting syslogd/klogd: done [2025-09-23 22:32:14.543] DML Start [2025-09-23 22:32:14.736] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:32:14.992] DML res1: 0 [2025-09-23 22:32:15.352] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:32:15.352] Read Success [2025-09-23 22:32:15.352] Verifying certificate... [2025-09-23 22:32:15.607] Verified OK [2025-09-23 22:32:15.623] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:32:17.403] Verified OK [2025-09-23 22:32:17.403] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:32:18.036] Verified OK [2025-09-23 22:32:18.036] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:32:20.578] fs.protected_hardlinks = 1 [2025-09-23 22:32:20.594] fs.protected_symlinks = 1 [2025-09-23 22:32:20.594] kernel.modules_disabled = 1 [2025-09-23 22:32:20.802] [2025-09-23 22:32:20.802] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:32:22.051] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:32:29.774] SBL1:1210.0.1.0 [2025-09-23 22:32:29.805] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:32:31.388] SBL2:1210.0.1.0 [2025-09-23 22:32:31.420] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:32:31.532] j-A [2025-09-23 22:32:38.903] The R5 Autosar Classic is running [2025-09-23 22:32:38.903] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:32:38.903] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:32:39.510] INIT: version 2.96 booting [2025-09-23 22:32:39.622] INIT: Entering runlevel: 5 [2025-09-23 22:32:39.782] mtd32 attached [2025-09-23 22:32:39.782] mtd24 attached [2025-09-23 22:32:39.798] mtd28 attached [2025-09-23 22:32:39.846] RTNETLINK answers: File exists [2025-09-23 22:32:39.846] ubi0:dml_code is mounted. [2025-09-23 22:32:39.908] ubi2:animations is mounted. [2025-09-23 22:32:39.908] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:32:39.908] ubi1:textures is mounted. [2025-09-23 22:32:39.908] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:32:39.908] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:32:39.908] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:32:39.908] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:32:39.908] data.LB_FadeInType0=100 [2025-09-23 22:32:39.908] data.CHLH_FadeInType0=0 [2025-09-23 22:32:39.908] data.WU_FadeInDelay=0 [2025-09-23 22:32:39.908] max_time_out=0 [2025-09-23 22:32:39.908] No splash screen [2025-09-23 22:32:39.908] stop dss Done [2025-09-23 22:32:39.956] /dev/mem opened. [2025-09-23 22:32:39.956] Memory mapped at address 0xffffb7597000. [2025-09-23 22:32:39.996] Read at address 0x00600018 (0xffffb7597018): 0x00000000 [2025-09-23 22:32:39.996] Write at address 0x00600018 (0xffffb7597018): 0x00400040, readback 0x00400040 [2025-09-23 22:32:39.996] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:32:39.996] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:32:40.188] Loaded PowerVR consumer services. [2025-09-23 22:32:40.257] Waiting data available... [2025-09-23 22:32:40.257] 512+0 records in [2025-09-23 22:32:40.257] 512+0 records out [2025-09-23 22:32:40.273] Starting syslogd/klogd: done [2025-09-23 22:32:40.289] DML Start [2025-09-23 22:32:40.498] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:32:40.753] DML res1: 0 [2025-09-23 22:32:41.073] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:32:41.094] Read Success [2025-09-23 22:32:41.094] Verifying certificate... [2025-09-23 22:32:41.334] Verified OK [2025-09-23 22:32:41.350] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:32:43.043] Verified OK [2025-09-23 22:32:43.043] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:32:43.625] Verified OK [2025-09-23 22:32:43.625] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:32:46.231] fs.protected_hardlinks = 1 [2025-09-23 22:32:46.246] fs.protected_symlinks = 1 [2025-09-23 22:32:46.246] kernel.modules_disabled = 1 [2025-09-23 22:32:46.455] [2025-09-23 22:32:46.455] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:32:47.782] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:32:55.545] SBL1:1210.0.1.0 [2025-09-23 22:32:55.577] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:32:57.160] SBL2:1210.0.1.0 [2025-09-23 22:32:57.191] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:32:57.304] j-A [2025-09-23 22:33:04.643] The R5 Autosar Classic is running [2025-09-23 22:33:04.668] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:33:04.668] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:33:05.276] INIT: version 2.96 booting [2025-09-23 22:33:05.388] INIT: Entering runlevel: 5 [2025-09-23 22:33:05.531] mtd24 attached [2025-09-23 22:33:05.547] mtd28 attached [2025-09-23 22:33:05.563] mtd32 attached [2025-09-23 22:33:05.611] RTNETLINK answers: File exists [2025-09-23 22:33:05.611] ubi1:animations is mounted. [2025-09-23 22:33:05.657] ubi0:textures is mounted. [2025-09-23 22:33:05.657] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:33:05.657] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:33:05.657] ubi2:dml_code is mounted. [2025-09-23 22:33:05.657] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:33:05.657] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:33:05.657] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:33:05.657] data.LB_FadeInType0=100 [2025-09-23 22:33:05.679] data.CHLH_FadeInType0=0 [2025-09-23 22:33:05.679] data.WU_FadeInDelay=0 [2025-09-23 22:33:05.679] max_time_out=0 [2025-09-23 22:33:05.679] No splash screen [2025-09-23 22:33:05.679] stop dss Done [2025-09-23 22:33:05.695] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:33:05.711] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:33:05.753] /dev/mem opened. [2025-09-23 22:33:05.753] Memory mapped at address 0xffff991d8000. [2025-09-23 22:33:05.753] Read at address 0x00600018 (0xffff991d8018): 0x00000000 [2025-09-23 22:33:05.753] Write at address 0x00600018 (0xffff991d8018): 0x00400040, readback 0x00400040 [2025-09-23 22:33:05.864] Loaded PowerVR consumer services. [2025-09-23 22:33:05.993] 512+0 records in [2025-09-23 22:33:05.993] 512+0 records out [2025-09-23 22:33:06.008] Waiting data available... [2025-09-23 22:33:06.024] Starting syslogd/klogd: done [2025-09-23 22:33:06.040] DML Start [2025-09-23 22:33:06.216] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:33:06.392] DML res1: 0 [2025-09-23 22:33:06.983] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:33:06.983] Read Success [2025-09-23 22:33:06.983] Verifying certificate... [2025-09-23 22:33:07.206] Verified OK [2025-09-23 22:33:07.222] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:33:08.894] Verified OK [2025-09-23 22:33:08.894] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:33:09.462] Verified OK [2025-09-23 22:33:09.462] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:33:11.941] fs.protected_hardlinks = 1 [2025-09-23 22:33:11.941] fs.protected_symlinks = 1 [2025-09-23 22:33:11.957] kernel.modules_disabled = 1 [2025-09-23 22:33:12.148] [2025-09-23 22:33:12.148] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:33:13.537] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:33:21.273] SBL1:1210.0.1.0 [2025-09-23 22:33:21.321] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:33:22.888] SBL2:1210.0.1.0 [2025-09-23 22:33:22.920] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:33:23.032] j-A [2025-09-23 22:33:30.405] The R5 Autosar Classic is running [2025-09-23 22:33:30.405] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:33:30.405] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:33:31.013] INIT: version 2.96 booting [2025-09-23 22:33:31.124] INIT: Entering runlevel: 5 [2025-09-23 22:33:31.268] mtd28 attached [2025-09-23 22:33:31.284] mtd24 attached [2025-09-23 22:33:31.300] mtd32 attached [2025-09-23 22:33:31.348] RTNETLINK answers: File exists [2025-09-23 22:33:31.348] ubi1:textures is mounted. [2025-09-23 22:33:31.408] ubi2:dml_code is mounted. [2025-09-23 22:33:31.408] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:33:31.408] ubi0:animations is mounted. [2025-09-23 22:33:31.408] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:33:31.408] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:33:31.408] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:33:31.408] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:33:31.408] data.LB_FadeInType0=100 [2025-09-23 22:33:31.408] data.CHLH_FadeInType0=0 [2025-09-23 22:33:31.408] data.WU_FadeInDelay=0 [2025-09-23 22:33:31.408] max_time_out=0 [2025-09-23 22:33:31.408] No splash screen [2025-09-23 22:33:31.408] stop dss Done [2025-09-23 22:33:31.486] /dev/mem opened. [2025-09-23 22:33:31.486] Memory mapped at address 0xffffae6e7000. [2025-09-23 22:33:31.486] Read at address 0x00600018 (0xffffae6e7018): 0x00000000 [2025-09-23 22:33:31.486] Write at address 0x00600018 (0xffffae6e7018): 0x00400040, readback 0x00400040 [2025-09-23 22:33:31.486] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:33:31.486] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:33:31.581] Loaded PowerVR consumer services. [2025-09-23 22:33:31.725] 512+0 records in [2025-09-23 22:33:31.725] 512+0 records out [2025-09-23 22:33:31.725] Waiting data available... [2025-09-23 22:33:31.757] Starting syslogd/klogd: done [2025-09-23 22:33:31.773] DML Start [2025-09-23 22:33:31.981] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:33:32.173] DML res1: 0 [2025-09-23 22:33:32.643] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:33:32.643] Read Success [2025-09-23 22:33:32.643] Verifying certificate... [2025-09-23 22:33:32.898] Verified OK [2025-09-23 22:33:32.914] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:33:34.609] Verified OK [2025-09-23 22:33:34.609] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:33:35.190] Verified OK [2025-09-23 22:33:35.190] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:33:37.716] fs.protected_hardlinks = 1 [2025-09-23 22:33:37.716] fs.protected_symlinks = 1 [2025-09-23 22:33:37.732] kernel.modules_disabled = 1 [2025-09-23 22:33:37.924] [2025-09-23 22:33:37.924] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:33:39.233] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:33:47.039] SBL1:1210.0.1.0 [2025-09-23 22:33:47.071] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:33:48.654] SBL2:1210.0.1.0 [2025-09-23 22:33:48.686] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:33:48.798] j-A [2025-09-23 22:33:56.137] The R5 Autosar Classic is running [2025-09-23 22:33:56.169] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:33:56.169] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:33:56.776] INIT: version 2.96 booting [2025-09-23 22:33:56.888] INIT: Entering runlevel: 5 [2025-09-23 22:33:57.048] mtd24 attached [2025-09-23 22:33:57.048] mtd28 attached [2025-09-23 22:33:57.080] mtd32 attached [2025-09-23 22:33:57.096] ubi0:textures is mounted. [2025-09-23 22:33:57.112] ubi1:animations is mounted. [2025-09-23 22:33:57.128] RTNETLINK answers: File exists [2025-09-23 22:33:57.179] ubi2:dml_code is mounted. [2025-09-23 22:33:57.179] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:33:57.179] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:33:57.179] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:33:57.179] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:33:57.179] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:33:57.179] data.LB_FadeInType0=100 [2025-09-23 22:33:57.179] data.CHLH_FadeInType0=0 [2025-09-23 22:33:57.179] data.WU_FadeInDelay=0 [2025-09-23 22:33:57.179] max_time_out=0 [2025-09-23 22:33:57.179] No splash screen [2025-09-23 22:33:57.179] stop dss Done [2025-09-23 22:33:57.256] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:33:57.256] /dev/mem opened. [2025-09-23 22:33:57.256] Memory mapped at address 0xffffad390000. [2025-09-23 22:33:57.256] Read at address 0x00600018 (0xffffad390018): 0x00000000 [2025-09-23 22:33:57.256] Write at address 0x00600018 (0xffffad390018): 0x00400040, readback 0x00400040 [2025-09-23 22:33:57.256] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:33:57.480] Loaded PowerVR consumer services. [2025-09-23 22:33:57.528] Waiting data available... [2025-09-23 22:33:57.544] 512+0 records in [2025-09-23 22:33:57.544] 512+0 records out [2025-09-23 22:33:57.559] Starting syslogd/klogd: done [2025-09-23 22:33:57.591] DML Start [2025-09-23 22:33:57.768] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:33:57.991] DML res1: 0 [2025-09-23 22:33:58.483] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:33:58.483] Read Success [2025-09-23 22:33:58.483] Verifying certificate... [2025-09-23 22:33:58.707] Verified OK [2025-09-23 22:33:58.739] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:34:00.302] Verified OK [2025-09-23 22:34:00.302] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:34:00.934] Verified OK [2025-09-23 22:34:00.934] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:34:03.444] fs.protected_hardlinks = 1 [2025-09-23 22:34:03.444] fs.protected_symlinks = 1 [2025-09-23 22:34:03.460] kernel.modules_disabled = 1 [2025-09-23 22:34:03.652] [2025-09-23 22:34:03.652] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:34:05.035] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:34:12.783] SBL1:1210.0.1.0 [2025-09-23 22:34:12.831] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:34:14.399] SBL2:1210.0.1.0 [2025-09-23 22:34:14.446] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:34:14.542] j-A [2025-09-23 22:34:21.897] The R5 Autosar Classic is running [2025-09-23 22:34:21.921] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:34:21.921] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:34:22.528] INIT: version 2.96 booting [2025-09-23 22:34:22.640] INIT: Entering runlevel: 5 [2025-09-23 22:34:22.800] mtd24 attached [2025-09-23 22:34:22.800] mtd28 attached [2025-09-23 22:34:22.832] mtd32 attached [2025-09-23 22:34:22.832] ubi0:textures is mounted. [2025-09-23 22:34:22.864] ubi1:animations is mounted. [2025-09-23 22:34:22.864] RTNETLINK answers: File exists [2025-09-23 22:34:22.921] ubi2:dml_code is mounted. [2025-09-23 22:34:22.921] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:34:22.921] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:34:22.921] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:34:22.921] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:34:22.921] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:34:22.921] data.LB_FadeInType0=100 [2025-09-23 22:34:22.921] data.CHLH_FadeInType0=0 [2025-09-23 22:34:22.921] data.WU_FadeInDelay=0 [2025-09-23 22:34:22.921] max_time_out=0 [2025-09-23 22:34:22.921] No splash screen [2025-09-23 22:34:22.921] stop dss Done [2025-09-23 22:34:22.953] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:34:22.969] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:34:23.004] /dev/mem opened. [2025-09-23 22:34:23.004] Memory mapped at address 0xffffaae10000. [2025-09-23 22:34:23.004] Read at address 0x00600018 (0xffffaae10018): 0x00000000 [2025-09-23 22:34:23.004] Write at address 0x00600018 (0xffffaae10018): 0x00400040, readback 0x00400040 [2025-09-23 22:34:23.116] Loaded PowerVR consumer services. [2025-09-23 22:34:23.257] Waiting data available... [2025-09-23 22:34:23.257] 512+0 records in [2025-09-23 22:34:23.257] 512+0 records out [2025-09-23 22:34:23.289] Starting syslogd/klogd: done [2025-09-23 22:34:23.305] DML Start [2025-09-23 22:34:23.496] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:34:23.737] DML res1: 0 [2025-09-23 22:34:24.176] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:34:24.176] Read Success [2025-09-23 22:34:24.176] Verifying certificate... [2025-09-23 22:34:24.432] Verified OK [2025-09-23 22:34:24.448] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:34:26.103] Verified OK [2025-09-23 22:34:26.103] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:34:26.737] Verified OK [2025-09-23 22:34:26.737] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:34:29.328] fs.protected_hardlinks = 1 [2025-09-23 22:34:29.344] fs.protected_symlinks = 1 [2025-09-23 22:34:29.344] kernel.modules_disabled = 1 [2025-09-23 22:34:29.567] [2025-09-23 22:34:29.567] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:34:30.781] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:34:38.525] SBL1:1210.0.1.0 [2025-09-23 22:34:38.573] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:34:40.139] SBL2:1210.0.1.0 [2025-09-23 22:34:40.187] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:34:40.283] j-A [2025-09-23 22:34:47.637] The R5 Autosar Classic is running [2025-09-23 22:34:47.662] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:34:47.662] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:34:48.270] INIT: version 2.96 booting [2025-09-23 22:34:48.382] INIT: Entering runlevel: 5 [2025-09-23 22:34:48.542] mtd24 attached [2025-09-23 22:34:48.542] mtd32 attached [2025-09-23 22:34:48.557] mtd28 attached [2025-09-23 22:34:48.605] RTNETLINK answers: File exists [2025-09-23 22:34:48.678] ubi0:textures is mounted. [2025-09-23 22:34:48.678] ubi1:dml_code is mounted. [2025-09-23 22:34:48.678] ubi2:animations is mounted. [2025-09-23 22:34:48.678] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:34:48.678] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:34:48.678] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:34:48.678] data.LB_FadeInType0=100 [2025-09-23 22:34:48.678] data.CHLH_FadeInType0=0 [2025-09-23 22:34:48.678] data.WU_FadeInDelay=0 [2025-09-23 22:34:48.678] max_time_out=0 [2025-09-23 22:34:48.678] No splash screen [2025-09-23 22:34:48.678] stop dss Done [2025-09-23 22:34:48.678] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:34:48.678] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:34:48.744] /dev/mem opened. [2025-09-23 22:34:48.744] Memory mapped at address 0xffffa33ff000. [2025-09-23 22:34:48.744] Read at address 0x00600018 (0xffffa33ff018): 0x00000000 [2025-09-23 22:34:48.744] Write at address 0x00600018 (0xffffa33ff018): 0x00400040, readback 0x00400040 [2025-09-23 22:34:48.760] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:34:48.776] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:34:48.967] Loaded PowerVR consumer services. [2025-09-23 22:34:48.999] Waiting data available... [2025-09-23 22:34:48.999] 512+0 records in [2025-09-23 22:34:48.999] 512+0 records out [2025-09-23 22:34:49.047] Starting syslogd/klogd: done [2025-09-23 22:34:49.063] DML Start [2025-09-23 22:34:49.223] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:34:49.447] DML res1: 0 [2025-09-23 22:34:49.894] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:34:49.911] Read Success [2025-09-23 22:34:49.911] Verifying certificate... [2025-09-23 22:34:50.134] Verified OK [2025-09-23 22:34:50.150] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:34:51.808] Verified OK [2025-09-23 22:34:51.808] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:34:52.511] Verified OK [2025-09-23 22:34:52.511] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:34:55.118] fs.protected_hardlinks = 1 [2025-09-23 22:34:55.134] fs.protected_symlinks = 1 [2025-09-23 22:34:55.134] kernel.modules_disabled = 1 [2025-09-23 22:34:55.326] [2025-09-23 22:34:55.326] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:34:56.537] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:35:04.296] SBL1:1210.0.1.0 [2025-09-23 22:35:04.328] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:35:05.910] SBL2:1210.0.1.0 [2025-09-23 22:35:05.942] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:35:06.054] j-A [2025-09-23 22:35:13.427] The R5 Autosar Classic is running [2025-09-23 22:35:13.427] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:35:13.427] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:35:14.034] INIT: version 2.96 booting [2025-09-23 22:35:14.147] INIT: Entering runlevel: 5 [2025-09-23 22:35:14.290] mtd28 attached [2025-09-23 22:35:14.306] mtd24 attached [2025-09-23 22:35:14.322] mtd32 attached [2025-09-23 22:35:14.354] ubi0:animations is mounted. [2025-09-23 22:35:14.370] RTNETLINK answers: File exists [2025-09-23 22:35:14.450] ubi1:textures is mounted. [2025-09-23 22:35:14.450] ubi2:dml_code is mounted. [2025-09-23 22:35:14.450] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:35:14.450] data.LB_FadeInType0=100 [2025-09-23 22:35:14.450] data.CHLH_FadeInType0=0 [2025-09-23 22:35:14.450] data.WU_FadeInDelay=0 [2025-09-23 22:35:14.450] max_time_out=0 [2025-09-23 22:35:14.450] No splash screen [2025-09-23 22:35:14.450] stop dss Done [2025-09-23 22:35:14.450] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:35:14.450] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:35:14.450] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:35:14.450] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:35:14.466] /dev/mem opened. [2025-09-23 22:35:14.498] Memory mapped at address 0xffff901c7000. [2025-09-23 22:35:14.498] Read at address 0x00600018 (0xffff901c7018): 0x00000000 [2025-09-23 22:35:14.498] Write at address 0x00600018 (0xffff901c7018): 0x00400040, readback 0x00400040 [2025-09-23 22:35:14.545] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:35:14.561] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:35:14.689] Loaded PowerVR consumer services. [2025-09-23 22:35:14.797] Waiting data available... [2025-09-23 22:35:14.797] 512+0 records in [2025-09-23 22:35:14.797] 512+0 records out [2025-09-23 22:35:14.813] Starting syslogd/klogd: done [2025-09-23 22:35:14.829] DML Start [2025-09-23 22:35:15.005] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:35:15.212] DML res1: 0 [2025-09-23 22:35:15.656] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:35:15.656] Read Success [2025-09-23 22:35:15.657] Verifying certificate... [2025-09-23 22:35:15.929] Verified OK [2025-09-23 22:35:15.944] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:35:17.606] Verified OK [2025-09-23 22:35:17.606] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:35:18.227] Verified OK [2025-09-23 22:35:18.227] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:35:20.865] fs.protected_hardlinks = 1 [2025-09-23 22:35:20.881] fs.protected_symlinks = 1 [2025-09-23 22:35:20.897] kernel.modules_disabled = 1 [2025-09-23 22:35:21.090] [2025-09-23 22:35:21.090] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:35:22.329] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:35:30.066] SBL1:1210.0.1.0 [2025-09-23 22:35:30.114] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:35:31.682] SBL2:1210.0.1.0 [2025-09-23 22:35:31.730] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:35:31.825] j-A [2025-09-23 22:35:39.179] The R5 Autosar Classic is running [2025-09-23 22:35:39.204] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:35:39.204] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:35:39.811] INIT: version 2.96 booting [2025-09-23 22:35:39.923] INIT: Entering runlevel: 5 [2025-09-23 22:35:40.083] mtd24 attached [2025-09-23 22:35:40.099] mtd32 attached [2025-09-23 22:35:40.099] mtd28 attached [2025-09-23 22:35:40.130] ubi0:textures is mounted. [2025-09-23 22:35:40.216] RTNETLINK answers: File exists [2025-09-23 22:35:40.216] ubi1:dml_code is mounted. [2025-09-23 22:35:40.216] ubi2:animations is mounted. [2025-09-23 22:35:40.216] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:35:40.216] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:35:40.216] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:35:40.216] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:35:40.216] data.LB_FadeInType0=100 [2025-09-23 22:35:40.216] data.CHLH_FadeInType0=0 [2025-09-23 22:35:40.216] data.WU_FadeInDelay=0 [2025-09-23 22:35:40.216] max_time_out=0 [2025-09-23 22:35:40.216] No splash screen [2025-09-23 22:35:40.216] stop dss Done [2025-09-23 22:35:40.216] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:35:40.287] /dev/mem opened. [2025-09-23 22:35:40.287] Memory mapped at address 0xffff96001000. [2025-09-23 22:35:40.287] Read at address 0x00600018 (0xffff96001018): 0x00000000 [2025-09-23 22:35:40.287] Write at address 0x00600018 (0xffff96001018): 0x00400040, readback 0x00400040 [2025-09-23 22:35:40.287] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:35:40.287] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:35:40.510] Loaded PowerVR consumer services. [2025-09-23 22:35:40.526] Waiting data available... [2025-09-23 22:35:40.542] 512+0 records in [2025-09-23 22:35:40.558] 512+0 records out [2025-09-23 22:35:40.591] Starting syslogd/klogd: done [2025-09-23 22:35:40.607] DML Start [2025-09-23 22:35:40.798] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:35:41.022] DML res1: 0 [2025-09-23 22:35:41.453] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:35:41.470] Read Success [2025-09-23 22:35:41.470] Verifying certificate... [2025-09-23 22:35:41.710] Verified OK [2025-09-23 22:35:41.725] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:35:43.403] Verified OK [2025-09-23 22:35:43.403] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:35:44.042] Verified OK [2025-09-23 22:35:44.063] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:35:46.686] fs.protected_hardlinks = 1 [2025-09-23 22:35:46.702] fs.protected_symlinks = 1 [2025-09-23 22:35:46.702] kernel.modules_disabled = 1 [2025-09-23 22:35:46.910] [2025-09-23 22:35:46.910] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:35:48.153] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:35:55.822] SBL1:1210.0.1.0 [2025-09-23 22:35:55.870] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:35:57.438] SBL2:1210.0.1.0 [2025-09-23 22:35:57.469] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:35:57.581] j-A [2025-09-23 22:36:04.935] The R5 Autosar Classic is running [2025-09-23 22:36:04.935] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:36:04.956] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:36:05.563] INIT: version 2.96 booting [2025-09-23 22:36:05.675] INIT: Entering runlevel: 5 [2025-09-23 22:36:05.835] mtd32 attached [2025-09-23 22:36:05.835] mtd28 attached [2025-09-23 22:36:05.851] mtd24 attached [2025-09-23 22:36:05.883] RTNETLINK answers: File exists [2025-09-23 22:36:05.933] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:36:05.933] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:36:05.933] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:36:05.933] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:36:05.933] ubi2:textures is mounted. [2025-09-23 22:36:05.933] ubi1:animations is mounted. [2025-09-23 22:36:05.933] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:36:05.933] ubi0:dml_code is mounted. [2025-09-23 22:36:05.981] data.LB_FadeInType0=100 [2025-09-23 22:36:05.981] data.CHLH_FadeInType0=0 [2025-09-23 22:36:05.981] data.WU_FadeInDelay=0 [2025-09-23 22:36:05.981] max_time_out=0 [2025-09-23 22:36:05.981] No splash screen [2025-09-23 22:36:05.981] stop dss Done [2025-09-23 22:36:05.981] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:36:05.981] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:36:06.039] /dev/mem opened. [2025-09-23 22:36:06.039] Memory mapped at address 0xffff89849000. [2025-09-23 22:36:06.039] Read at address 0x00600018 (0xffff89849018): 0x00000000 [2025-09-23 22:36:06.039] Write at address 0x00600018 (0xffff89849018): 0x00400040, readback 0x00400040 [2025-09-23 22:36:06.230] Loaded PowerVR consumer services. [2025-09-23 22:36:06.262] Waiting data available... [2025-09-23 22:36:06.278] 512+0 records in [2025-09-23 22:36:06.278] 512+0 records out [2025-09-23 22:36:06.310] Starting syslogd/klogd: done [2025-09-23 22:36:06.326] DML Start [2025-09-23 22:36:06.471] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:36:06.742] DML res1: 0 [2025-09-23 22:36:07.167] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:36:07.167] Read Success [2025-09-23 22:36:07.167] Verifying certificate... [2025-09-23 22:36:07.439] Verified OK [2025-09-23 22:36:07.455] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:36:09.133] Verified OK [2025-09-23 22:36:09.133] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:36:09.844] Verified OK [2025-09-23 22:36:09.844] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:36:12.482] fs.protected_hardlinks = 1 [2025-09-23 22:36:12.482] fs.protected_symlinks = 1 [2025-09-23 22:36:12.497] kernel.modules_disabled = 1 [2025-09-23 22:36:12.705] [2025-09-23 22:36:12.705] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:36:13.829] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:36:21.580] SBL1:1210.0.1.0 [2025-09-23 22:36:21.628] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:36:23.195] SBL2:1210.0.1.0 [2025-09-23 22:36:23.227] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:36:23.339] j-A [2025-09-23 22:36:30.714] The R5 Autosar Classic is running [2025-09-23 22:36:30.714] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:36:30.714] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:36:31.322] INIT: version 2.96 booting [2025-09-23 22:36:31.433] INIT: Entering runlevel: 5 [2025-09-23 22:36:31.594] mtd28 attached [2025-09-23 22:36:31.594] mtd24 attached [2025-09-23 22:36:31.610] mtd32 attached [2025-09-23 22:36:31.642] ubi0:animations is mounted. [2025-09-23 22:36:31.657] RTNETLINK answers: File exists [2025-09-23 22:36:31.724] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:36:31.724] ubi1:textures is mounted. [2025-09-23 22:36:31.724] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:36:31.724] ubi2:dml_code is mounted. [2025-09-23 22:36:31.724] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:36:31.724] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:36:31.724] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:36:31.724] data.LB_FadeInType0=100 [2025-09-23 22:36:31.724] data.CHLH_FadeInType0=0 [2025-09-23 22:36:31.724] data.WU_FadeInDelay=0 [2025-09-23 22:36:31.724] max_time_out=0 [2025-09-23 22:36:31.724] No splash screen [2025-09-23 22:36:31.724] stop dss Done [2025-09-23 22:36:31.796] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:36:31.796] /dev/mem opened. [2025-09-23 22:36:31.796] Memory mapped at address 0xffffbbd14000. [2025-09-23 22:36:31.796] Read at address 0x00600018 (0xffffbbd14018): 0x00000000 [2025-09-23 22:36:31.796] Write at address 0x00600018 (0xffffbbd14018): 0x00400040, readback 0x00400040 [2025-09-23 22:36:31.796] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:36:32.036] Loaded PowerVR consumer services. [2025-09-23 22:36:32.052] Waiting data available... [2025-09-23 22:36:32.084] 512+0 records in [2025-09-23 22:36:32.084] 512+0 records out [2025-09-23 22:36:32.100] Starting syslogd/klogd: done [2025-09-23 22:36:32.132] DML Start [2025-09-23 22:36:32.308] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:36:32.500] DML res1: 0 [2025-09-23 22:36:33.066] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:36:33.066] Read Success [2025-09-23 22:36:33.066] Verifying certificate... [2025-09-23 22:36:33.290] Verified OK [2025-09-23 22:36:33.322] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:36:34.921] Verified OK [2025-09-23 22:36:34.921] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:36:35.529] Verified OK [2025-09-23 22:36:35.529] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:36:38.182] fs.protected_hardlinks = 1 [2025-09-23 22:36:38.182] fs.protected_symlinks = 1 [2025-09-23 22:36:38.197] kernel.modules_disabled = 1 [2025-09-23 22:36:38.390] [2025-09-23 22:36:38.390] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:36:39.568] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:36:47.324] SBL1:1210.0.1.0 [2025-09-23 22:36:47.356] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:36:48.939] SBL2:1210.0.1.0 [2025-09-23 22:36:48.971] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:36:49.083] j-A [2025-09-23 22:36:56.457] The R5 Autosar Classic is running [2025-09-23 22:36:56.457] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:36:56.457] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:36:57.064] INIT: version 2.96 booting [2025-09-23 22:36:57.176] INIT: Entering runlevel: 5 [2025-09-23 22:36:57.336] mtd32 attached [2025-09-23 22:36:57.336] mtd24 attached [2025-09-23 22:36:57.352] mtd28 attached [2025-09-23 22:36:57.400] RTNETLINK answers: File exists [2025-09-23 22:36:57.400] ubi0:dml_code is mounted. [2025-09-23 22:36:57.457] ubi1:textures is mounted. [2025-09-23 22:36:57.457] ubi2:animations is mounted. [2025-09-23 22:36:57.457] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:36:57.457] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:36:57.457] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:36:57.457] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:36:57.457] data.LB_FadeInType0=100 [2025-09-23 22:36:57.457] data.CHLH_FadeInType0=0 [2025-09-23 22:36:57.457] data.WU_FadeInDelay=0 [2025-09-23 22:36:57.457] max_time_out=0 [2025-09-23 22:36:57.457] No splash screen [2025-09-23 22:36:57.457] stop dss Done [2025-09-23 22:36:57.457] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:36:57.531] /dev/mem opened. [2025-09-23 22:36:57.531] Memory mapped at address 0xffff8de6d000. [2025-09-23 22:36:57.531] Read at address 0x00600018 (0xffff8de6d018): 0x00000000 [2025-09-23 22:36:57.531] Write at address 0x00600018 (0xffff8de6d018): 0x00400040, readback 0x00400040 [2025-09-23 22:36:57.531] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:36:57.531] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:36:57.754] Loaded PowerVR consumer services. [2025-09-23 22:36:57.786] Waiting data available... [2025-09-23 22:36:57.802] 512+0 records in [2025-09-23 22:36:57.802] 512+0 records out [2025-09-23 22:36:57.835] Starting syslogd/klogd: done [2025-09-23 22:36:57.851] DML Start [2025-09-23 22:36:58.027] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:36:58.250] DML res1: 0 [2025-09-23 22:36:58.689] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:36:58.689] Read Success [2025-09-23 22:36:58.689] Verifying certificate... [2025-09-23 22:36:58.929] Verified OK [2025-09-23 22:36:58.945] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:37:00.511] Verified OK [2025-09-23 22:37:00.511] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:37:01.162] Verified OK [2025-09-23 22:37:01.162] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:37:03.912] fs.protected_hardlinks = 1 [2025-09-23 22:37:03.912] fs.protected_symlinks = 1 [2025-09-23 22:37:03.928] kernel.modules_disabled = 1 [2025-09-23 22:37:04.119] [2025-09-23 22:37:04.119] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:37:05.342] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:37:13.076] SBL1:1210.0.1.0 [2025-09-23 22:37:13.124] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:37:14.691] SBL2:1210.0.1.0 [2025-09-23 22:37:14.739] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:37:14.834] j-A [2025-09-23 22:37:22.190] The R5 Autosar Classic is running [2025-09-23 22:37:22.212] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:37:22.212] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:37:22.820] INIT: version 2.96 booting [2025-09-23 22:37:22.932] INIT: Entering runlevel: 5 [2025-09-23 22:37:23.092] mtd32 attached [2025-09-23 22:37:23.108] mtd28 attached [2025-09-23 22:37:23.108] mtd24 attached [2025-09-23 22:37:23.156] ubi0:dml_code is mounted. [2025-09-23 22:37:23.156] RTNETLINK answers: File exists [2025-09-23 22:37:23.220] ubi1:animations is mounted. [2025-09-23 22:37:23.220] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:37:23.220] ubi2:textures is mounted. [2025-09-23 22:37:23.220] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:37:23.220] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:37:23.220] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:37:23.220] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:37:23.220] data.LB_FadeInType0=100 [2025-09-23 22:37:23.220] data.CHLH_FadeInType0=0 [2025-09-23 22:37:23.220] data.WU_FadeInDelay=0 [2025-09-23 22:37:23.220] max_time_out=0 [2025-09-23 22:37:23.220] No splash screen [2025-09-23 22:37:23.220] stop dss Done [2025-09-23 22:37:23.251] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:37:23.267] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:37:23.299] /dev/mem opened. [2025-09-23 22:37:23.299] Memory mapped at address 0xffff9c2c3000. [2025-09-23 22:37:23.299] Read at address 0x00600018 (0xffff9c2c3018): 0x00000000 [2025-09-23 22:37:23.299] Write at address 0x00600018 (0xffff9c2c3018): 0x00400040, readback 0x00400040 [2025-09-23 22:37:23.492] Loaded PowerVR consumer services. [2025-09-23 22:37:23.539] Waiting data available... [2025-09-23 22:37:23.555] 512+0 records in [2025-09-23 22:37:23.555] 512+0 records out [2025-09-23 22:37:23.603] Starting syslogd/klogd: done [2025-09-23 22:37:23.619] DML Start [2025-09-23 22:37:23.779] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:37:24.019] DML res1: 0 [2025-09-23 22:37:24.465] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:37:24.465] Read Success [2025-09-23 22:37:24.465] Verifying certificate... [2025-09-23 22:37:24.752] Verified OK [2025-09-23 22:37:24.785] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:37:26.527] Verified OK [2025-09-23 22:37:26.527] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:37:27.093] Verified OK [2025-09-23 22:37:27.093] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:37:29.635] fs.protected_hardlinks = 1 [2025-09-23 22:37:29.635] fs.protected_symlinks = 1 [2025-09-23 22:37:29.635] kernel.modules_disabled = 1 [2025-09-23 22:37:29.811] [2025-09-23 22:37:29.811] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:37:31.117] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:37:38.864] SBL1:1210.0.1.0 [2025-09-23 22:37:38.896] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:37:40.478] SBL2:1210.0.1.0 [2025-09-23 22:37:40.510] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 22:37:40.623] j-A [2025-09-23 22:37:47.996] The R5 Autosar Classic is running [2025-09-23 22:37:47.996] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:37:47.996] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:37:48.604] INIT: version 2.96 booting [2025-09-23 22:37:48.715] INIT: Entering runlevel: 5 [2025-09-23 22:37:48.859] mtd24 attached [2025-09-23 22:37:48.875] mtd28 attached [2025-09-23 22:37:48.891] mtd32 attached [2025-09-23 22:37:48.907] ubi0:textures is mounted. [2025-09-23 22:37:48.939] RTNETLINK answers: File exists [2025-09-23 22:37:48.980] ubi2:dml_code is mounted. [2025-09-23 22:37:48.980] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:37:48.980] ubi1:animations is mounted. [2025-09-23 22:37:48.980] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:37:48.980] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:37:48.980] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:37:48.980] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:37:49.007] data.LB_FadeInType0=100 [2025-09-23 22:37:49.007] data.CHLH_FadeInType0=0 [2025-09-23 22:37:49.007] data.WU_FadeInDelay=0 [2025-09-23 22:37:49.007] max_time_out=0 [2025-09-23 22:37:49.007] No splash screen [2025-09-23 22:37:49.007] stop dss Done [2025-09-23 22:37:49.023] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:37:49.039] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:37:49.093] /dev/mem opened. [2025-09-23 22:37:49.093] Memory mapped at address 0xffffb8197000. [2025-09-23 22:37:49.093] Read at address 0x00600018 (0xffffb8197018): 0x00000000 [2025-09-23 22:37:49.093] Write at address 0x00600018 (0xffffb8197018): 0x00400040, readback 0x00400040 [2025-09-23 22:37:49.300] Loaded PowerVR consumer services. [2025-09-23 22:37:49.348] 512+0 records in [2025-09-23 22:37:49.348] 512+0 records out [2025-09-23 22:37:49.381] Waiting data available... [2025-09-23 22:37:49.396] Starting syslogd/klogd: done [2025-09-23 22:37:49.412] DML Start [2025-09-23 22:37:49.604] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:37:49.828] DML res1: 0 [2025-09-23 22:37:50.244] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:37:50.244] Read Success [2025-09-23 22:37:50.260] Verifying certificate... [2025-09-23 22:37:50.563] Verified OK [2025-09-23 22:37:50.579] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:37:52.301] Verified OK [2025-09-23 22:37:52.301] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:37:52.900] Verified OK [2025-09-23 22:37:52.900] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:37:55.569] fs.protected_hardlinks = 1 [2025-09-23 22:37:55.569] fs.protected_symlinks = 1 [2025-09-23 22:37:55.569] kernel.modules_disabled = 1 [2025-09-23 22:37:55.761] [2025-09-23 22:37:55.761] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:37:56.864] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:38:04.611] SBL1:1210.0.1.0 [2025-09-23 22:38:04.643] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:38:06.227] SBL2:1210.0.1.0 [2025-09-23 22:38:06.258] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:38:06.370] j-A [2025-09-23 22:38:13.710] The R5 Autosar Classic is running [2025-09-23 22:38:13.735] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:38:13.735] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:38:14.342] INIT: version 2.96 booting [2025-09-23 22:38:14.454] INIT: Entering runlevel: 5 [2025-09-23 22:38:14.614] mtd32 attached [2025-09-23 22:38:14.630] mtd24 attached [2025-09-23 22:38:14.646] mtd28 attached [2025-09-23 22:38:14.646] ubi0:dml_code is mounted. [2025-09-23 22:38:14.747] RTNETLINK answers: File exists [2025-09-23 22:38:14.747] ubi2:animations is mounted. [2025-09-23 22:38:14.747] ubi1:textures is mounted. [2025-09-23 22:38:14.747] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:38:14.747] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:38:14.747] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:38:14.747] data.LB_FadeInType0=100 [2025-09-23 22:38:14.747] data.CHLH_FadeInType0=0 [2025-09-23 22:38:14.747] data.WU_FadeInDelay=0 [2025-09-23 22:38:14.747] max_time_out=0 [2025-09-23 22:38:14.747] No splash screen [2025-09-23 22:38:14.747] stop dss Done [2025-09-23 22:38:14.747] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:38:14.747] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:38:14.812] /dev/mem opened. [2025-09-23 22:38:14.812] Memory mapped at address 0xffff83fd0000. [2025-09-23 22:38:14.812] Read at address 0x00600018 (0xffff83fd0018): 0x00000000 [2025-09-23 22:38:14.812] Write at address 0x00600018 (0xffff83fd0018): 0x00400040, readback 0x00400040 [2025-09-23 22:38:14.828] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:38:14.828] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:38:14.987] Loaded PowerVR consumer services. [2025-09-23 22:38:15.084] Waiting data available... [2025-09-23 22:38:15.084] 512+0 records in [2025-09-23 22:38:15.084] 512+0 records out [2025-09-23 22:38:15.132] Starting syslogd/klogd: done [2025-09-23 22:38:15.148] DML Start [2025-09-23 22:38:15.355] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:38:15.564] DML res1: 0 [2025-09-23 22:38:16.008] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:38:16.008] Read Success [2025-09-23 22:38:16.008] Verifying certificate... [2025-09-23 22:38:16.248] Verified OK [2025-09-23 22:38:16.264] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:38:18.082] Verified OK [2025-09-23 22:38:18.082] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:38:18.683] Verified OK [2025-09-23 22:38:18.683] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:38:21.211] fs.protected_hardlinks = 1 [2025-09-23 22:38:21.226] fs.protected_symlinks = 1 [2025-09-23 22:38:21.242] kernel.modules_disabled = 1 [2025-09-23 22:38:21.434] [2025-09-23 22:38:21.434] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:38:22.649] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:38:30.343] SBL1:1210.0.1.0 [2025-09-23 22:38:30.391] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 22:38:31.957] SBL2:1210.0.1.0 [2025-09-23 22:38:31.989] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:38:32.101] j-A [2025-09-23 22:38:39.456] The R5 Autosar Classic is running [2025-09-23 22:38:39.456] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:38:39.477] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:38:40.085] INIT: version 2.96 booting [2025-09-23 22:38:40.196] INIT: Entering runlevel: 5 [2025-09-23 22:38:40.357] mtd28 attached [2025-09-23 22:38:40.357] mtd24 attached [2025-09-23 22:38:40.404] ubi0:animations is mounted. [2025-09-23 22:38:40.404] mtd32 attached [2025-09-23 22:38:40.420] ubi1:textures is mounted. [2025-09-23 22:38:40.484] RTNETLINK answers: File exists [2025-09-23 22:38:40.484] ubi2:dml_code is mounted. [2025-09-23 22:38:40.484] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:38:40.484] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:38:40.484] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:38:40.484] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:38:40.484] data.LB_FadeInType0=100 [2025-09-23 22:38:40.484] data.CHLH_FadeInType0=0 [2025-09-23 22:38:40.484] data.WU_FadeInDelay=0 [2025-09-23 22:38:40.484] max_time_out=0 [2025-09-23 22:38:40.484] No splash screen [2025-09-23 22:38:40.484] stop dss Done [2025-09-23 22:38:40.484] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:38:40.579] /dev/mem opened. [2025-09-23 22:38:40.579] Memory mapped at address 0xffffb1afb000. [2025-09-23 22:38:40.579] Read at address 0x00600018 (0xffffb1afb018): 0x00000000 [2025-09-23 22:38:40.579] Write at address 0x00600018 (0xffffb1afb018): 0x00400040, readback 0x00400040 [2025-09-23 22:38:40.579] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:38:40.579] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:38:40.755] Loaded PowerVR consumer services. [2025-09-23 22:38:40.835] Waiting data available... [2025-09-23 22:38:40.835] 512+0 records in [2025-09-23 22:38:40.851] 512+0 records out [2025-09-23 22:38:40.883] Starting syslogd/klogd: done [2025-09-23 22:38:40.899] DML Start [2025-09-23 22:38:41.106] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:38:41.267] DML res1: 0 [2025-09-23 22:38:41.789] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:38:41.789] Read Success [2025-09-23 22:38:41.789] Verifying certificate... [2025-09-23 22:38:42.078] Verified OK [2025-09-23 22:38:42.094] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:38:43.716] Verified OK [2025-09-23 22:38:43.716] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:38:44.331] Verified OK [2025-09-23 22:38:44.331] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:38:46.889] fs.protected_hardlinks = 1 [2025-09-23 22:38:46.905] fs.protected_symlinks = 1 [2025-09-23 22:38:46.905] kernel.modules_disabled = 1 [2025-09-23 22:38:47.113] [2025-09-23 22:38:47.113] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:38:48.400] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:38:56.123] SBL1:1210.0.1.0 [2025-09-23 22:38:56.155] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:38:57.737] SBL2:1210.0.1.0 [2025-09-23 22:38:57.769] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:38:57.881] j-A [2025-09-23 22:39:05.251] The R5 Autosar Classic is running [2025-09-23 22:39:05.251] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:39:05.251] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:39:05.858] INIT: version 2.96 booting [2025-09-23 22:39:05.970] INIT: Entering runlevel: 5 [2025-09-23 22:39:06.130] mtd28 attached [2025-09-23 22:39:06.130] mtd32 attached [2025-09-23 22:39:06.146] mtd24 attached [2025-09-23 22:39:06.193] RTNETLINK answers: File exists [2025-09-23 22:39:06.193] ubi0:animations is mounted. [2025-09-23 22:39:06.262] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:39:06.262] ubi2:textures is mounted. [2025-09-23 22:39:06.262] ubi1:dml_code is mounted. [2025-09-23 22:39:06.262] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:39:06.262] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:39:06.262] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:39:06.262] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:39:06.262] data.LB_FadeInType0=100 [2025-09-23 22:39:06.262] data.CHLH_FadeInType0=0 [2025-09-23 22:39:06.262] data.WU_FadeInDelay=0 [2025-09-23 22:39:06.262] max_time_out=0 [2025-09-23 22:39:06.262] No splash screen [2025-09-23 22:39:06.262] stop dss Done [2025-09-23 22:39:06.343] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:39:06.343] /dev/mem opened. [2025-09-23 22:39:06.343] Memory mapped at address 0xffffa9876000. [2025-09-23 22:39:06.343] Read at address 0x00600018 (0xffffa9876018): 0x00000000 [2025-09-23 22:39:06.343] Write at address 0x00600018 (0xffffa9876018): 0x00400040, readback 0x00400040 [2025-09-23 22:39:06.343] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:39:06.551] Loaded PowerVR consumer services. [2025-09-23 22:39:06.583] Waiting data available... [2025-09-23 22:39:06.599] 512+0 records in [2025-09-23 22:39:06.599] 512+0 records out [2025-09-23 22:39:06.647] Starting syslogd/klogd: done [2025-09-23 22:39:06.663] DML Start [2025-09-23 22:39:06.839] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:39:07.094] DML res1: 0 [2025-09-23 22:39:07.526] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:39:07.547] Read Success [2025-09-23 22:39:07.547] Verifying certificate... [2025-09-23 22:39:07.787] Verified OK [2025-09-23 22:39:07.803] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:39:09.498] Verified OK [2025-09-23 22:39:09.498] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:39:10.089] Verified OK [2025-09-23 22:39:10.089] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:39:12.615] fs.protected_hardlinks = 1 [2025-09-23 22:39:12.631] fs.protected_symlinks = 1 [2025-09-23 22:39:12.631] kernel.modules_disabled = 1 [2025-09-23 22:39:12.823] [2025-09-23 22:39:12.823] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:39:14.140] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:39:21.852] SBL1:1210.0.1.0 [2025-09-23 22:39:21.900] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:39:23.466] SBL2:1210.0.1.0 [2025-09-23 22:39:23.514] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:39:23.610] j-A [2025-09-23 22:39:30.964] The R5 Autosar Classic is running [2025-09-23 22:39:30.989] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:39:30.989] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:39:31.596] INIT: version 2.96 booting [2025-09-23 22:39:31.709] INIT: Entering runlevel: 5 [2025-09-23 22:39:31.868] mtd24 attached [2025-09-23 22:39:31.868] mtd28 attached [2025-09-23 22:39:31.884] mtd32 attached [2025-09-23 22:39:31.901] ubi0:textures is mounted. [2025-09-23 22:39:31.997] RTNETLINK answers: File exists [2025-09-23 22:39:31.997] ubi1:animations is mounted. [2025-09-23 22:39:31.997] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:39:31.997] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:39:31.997] ubi2:dml_code is mounted. [2025-09-23 22:39:31.997] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:39:31.997] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:39:31.997] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:39:31.997] data.LB_FadeInType0=100 [2025-09-23 22:39:31.997] data.CHLH_FadeInType0=0 [2025-09-23 22:39:31.997] data.WU_FadeInDelay=0 [2025-09-23 22:39:31.997] max_time_out=0 [2025-09-23 22:39:31.997] No splash screen [2025-09-23 22:39:31.997] stop dss Done [2025-09-23 22:39:32.029] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:39:32.073] /dev/mem opened. [2025-09-23 22:39:32.073] Memory mapped at address 0xffffbe74e000. [2025-09-23 22:39:32.073] Read at address 0x00600018 (0xffffbe74e018): 0x00000000 [2025-09-23 22:39:32.073] Write at address 0x00600018 (0xffffbe74e018): 0x00400040, readback 0x00400040 [2025-09-23 22:39:32.073] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:39:32.281] Loaded PowerVR consumer services. [2025-09-23 22:39:32.329] Waiting data available... [2025-09-23 22:39:32.329] 512+0 records in [2025-09-23 22:39:32.345] 512+0 records out [2025-09-23 22:39:32.377] Starting syslogd/klogd: done [2025-09-23 22:39:32.409] DML Start [2025-09-23 22:39:32.585] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:39:32.792] DML res1: 0 [2025-09-23 22:39:33.241] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:39:33.262] Read Success [2025-09-23 22:39:33.262] Verifying certificate... [2025-09-23 22:39:33.485] Verified OK [2025-09-23 22:39:33.517] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:39:35.125] Verified OK [2025-09-23 22:39:35.126] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:39:35.772] Verified OK [2025-09-23 22:39:35.772] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:39:38.442] fs.protected_hardlinks = 1 [2025-09-23 22:39:38.458] fs.protected_symlinks = 1 [2025-09-23 22:39:38.458] kernel.modules_disabled = 1 [2025-09-23 22:39:38.666] [2025-09-23 22:39:38.666] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:39:39.840] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:39:47.614] SBL1:1210.0.1.0 [2025-09-23 22:39:47.646] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:39:49.229] SBL2:1210.0.1.0 [2025-09-23 22:39:49.261] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:39:49.373] j-A [2025-09-23 22:39:56.744] The R5 Autosar Classic is running [2025-09-23 22:39:56.744] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:39:56.744] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:39:57.351] INIT: version 2.96 booting [2025-09-23 22:39:57.462] INIT: Entering runlevel: 5 [2025-09-23 22:39:57.607] mtd28 attached [2025-09-23 22:39:57.623] mtd24 attached [2025-09-23 22:39:57.639] mtd32 attached [2025-09-23 22:39:57.671] ubi1:textures is mounted. [2025-09-23 22:39:57.687] ubi0:animations is mounted. [2025-09-23 22:39:57.687] RTNETLINK answers: File exists [2025-09-23 22:39:57.741] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:39:57.741] ubi2:dml_code is mounted. [2025-09-23 22:39:57.741] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:39:57.741] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:39:57.741] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:39:57.741] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:39:57.741] data.LB_FadeInType0=100 [2025-09-23 22:39:57.741] data.CHLH_FadeInType0=0 [2025-09-23 22:39:57.741] data.WU_FadeInDelay=0 [2025-09-23 22:39:57.741] max_time_out=0 [2025-09-23 22:39:57.741] No splash screen [2025-09-23 22:39:57.741] stop dss Done [2025-09-23 22:39:57.784] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:39:57.784] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:39:57.820] /dev/mem opened. [2025-09-23 22:39:57.820] Memory mapped at address 0xffffa0517000. [2025-09-23 22:39:57.820] Read at address 0x00600018 (0xffffa0517018): 0x00000000 [2025-09-23 22:39:57.820] Write at address 0x00600018 (0xffffa0517018): 0x00400040, readback 0x00400040 [2025-09-23 22:39:57.932] Loaded PowerVR consumer services. [2025-09-23 22:39:58.082] Waiting data available... [2025-09-23 22:39:58.082] 512+0 records in [2025-09-23 22:39:58.082] 512+0 records out [2025-09-23 22:39:58.114] Starting syslogd/klogd: done [2025-09-23 22:39:58.130] DML Start [2025-09-23 22:39:58.322] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:39:58.546] DML res1: 0 [2025-09-23 22:39:59.023] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:39:59.023] Read Success [2025-09-23 22:39:59.023] Verifying certificate... [2025-09-23 22:39:59.263] Verified OK [2025-09-23 22:39:59.279] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:40:00.812] Verified OK [2025-09-23 22:40:00.812] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:40:01.387] Verified OK [2025-09-23 22:40:01.387] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:40:04.169] fs.protected_hardlinks = 1 [2025-09-23 22:40:04.200] fs.protected_symlinks = 1 [2025-09-23 22:40:04.200] kernel.modules_disabled = 1 [2025-09-23 22:40:04.392] [2025-09-23 22:40:04.392] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:40:05.578] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:40:13.344] SBL1:1210.0.1.0 [2025-09-23 22:40:13.392] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:40:14.959] SBL2:1210.0.1.0 [2025-09-23 22:40:14.991] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:40:15.103] j-A [2025-09-23 22:40:22.457] The R5 Autosar Classic is running [2025-09-23 22:40:22.457] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:40:22.478] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:40:23.086] INIT: version 2.96 booting [2025-09-23 22:40:23.198] INIT: Entering runlevel: 5 [2025-09-23 22:40:23.341] mtd28 attached [2025-09-23 22:40:23.357] mtd32 attached [2025-09-23 22:40:23.373] mtd24 attached [2025-09-23 22:40:23.389] ubi0:animations is mounted. [2025-09-23 22:40:23.422] RTNETLINK answers: File exists [2025-09-23 22:40:23.449] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:40:23.449] ubi2:textures is mounted. [2025-09-23 22:40:23.449] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:40:23.449] ubi1:dml_code is mounted. [2025-09-23 22:40:23.449] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:40:23.449] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:40:23.481] data.LB_FadeInType0=100 [2025-09-23 22:40:23.481] data.CHLH_FadeInType0=0 [2025-09-23 22:40:23.481] data.WU_FadeInDelay=0 [2025-09-23 22:40:23.481] max_time_out=0 [2025-09-23 22:40:23.481] No splash screen [2025-09-23 22:40:23.481] stop dss Done [2025-09-23 22:40:23.481] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:40:23.549] /dev/mem opened. [2025-09-23 22:40:23.549] Memory mapped at address 0xffff8aa85000. [2025-09-23 22:40:23.549] Read at address 0x00600018 (0xffff8aa85018): 0x00000000 [2025-09-23 22:40:23.549] Write at address 0x00600018 (0xffff8aa85018): 0x00400040, readback 0x00400040 [2025-09-23 22:40:23.565] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:40:23.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:40:23.709] Loaded PowerVR consumer services. [2025-09-23 22:40:23.832] Waiting data available... [2025-09-23 22:40:23.832] 512+0 records in [2025-09-23 22:40:23.832] 512+0 records out [2025-09-23 22:40:23.848] Starting syslogd/klogd: done [2025-09-23 22:40:23.864] DML Start [2025-09-23 22:40:24.008] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:40:24.215] DML res1: 0 [2025-09-23 22:40:24.759] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:40:24.780] Read Success [2025-09-23 22:40:24.780] Verifying certificate... [2025-09-23 22:40:25.020] Verified OK [2025-09-23 22:40:25.036] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:40:26.698] Verified OK [2025-09-23 22:40:26.698] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:40:27.303] Verified OK [2025-09-23 22:40:27.303] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:40:29.845] fs.protected_hardlinks = 1 [2025-09-23 22:40:29.845] fs.protected_symlinks = 1 [2025-09-23 22:40:29.861] kernel.modules_disabled = 1 [2025-09-23 22:40:30.052] [2025-09-23 22:40:30.052] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:40:31.380] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:40:39.112] SBL1:1210.0.1.0 [2025-09-23 22:40:39.160] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:40:40.727] SBL2:1210.0.1.0 [2025-09-23 22:40:40.758] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:40:40.871] j-A [2025-09-23 22:40:48.226] The R5 Autosar Classic is running [2025-09-23 22:40:48.226] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:40:48.247] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:40:48.854] INIT: version 2.96 booting [2025-09-23 22:40:48.966] INIT: Entering runlevel: 5 [2025-09-23 22:40:49.110] mtd24 attached [2025-09-23 22:40:49.126] mtd28 attached [2025-09-23 22:40:49.158] mtd32 attached [2025-09-23 22:40:49.158] ubi0:textures is mounted. [2025-09-23 22:40:49.190] ubi1:animations is mounted. [2025-09-23 22:40:49.190] RTNETLINK answers: File exists [2025-09-23 22:40:49.249] ubi2:dml_code is mounted. [2025-09-23 22:40:49.249] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:40:49.249] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:40:49.249] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:40:49.249] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:40:49.249] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:40:49.249] data.LB_FadeInType0=100 [2025-09-23 22:40:49.249] data.CHLH_FadeInType0=0 [2025-09-23 22:40:49.249] data.WU_FadeInDelay=0 [2025-09-23 22:40:49.249] max_time_out=0 [2025-09-23 22:40:49.249] No splash screen [2025-09-23 22:40:49.249] stop dss Done [2025-09-23 22:40:49.326] /dev/mem opened. [2025-09-23 22:40:49.326] Memory mapped at address 0xffffb9218000. [2025-09-23 22:40:49.326] Read at address 0x00600018 (0xffffb9218018): 0x00000000 [2025-09-23 22:40:49.326] Write at address 0x00600018 (0xffffb9218018): 0x00400040, readback 0x00400040 [2025-09-23 22:40:49.326] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:40:49.326] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:40:49.438] Loaded PowerVR consumer services. [2025-09-23 22:40:49.591] 512+0 records in [2025-09-23 22:40:49.591] 512+0 records out [2025-09-23 22:40:49.591] Waiting data available... [2025-09-23 22:40:49.623] Starting syslogd/klogd: done [2025-09-23 22:40:49.655] DML Start [2025-09-23 22:40:49.814] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:40:50.070] DML res1: 0 [2025-09-23 22:40:50.519] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:40:50.534] Read Success [2025-09-23 22:40:50.534] Verifying certificate... [2025-09-23 22:40:50.790] Verified OK [2025-09-23 22:40:50.806] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:40:52.468] Verified OK [2025-09-23 22:40:52.484] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:40:53.081] Verified OK [2025-09-23 22:40:53.081] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:40:55.591] fs.protected_hardlinks = 1 [2025-09-23 22:40:55.607] fs.protected_symlinks = 1 [2025-09-23 22:40:55.607] kernel.modules_disabled = 1 [2025-09-23 22:40:55.798] [2025-09-23 22:40:55.798] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:40:57.109] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:41:04.861] SBL1:1210.0.1.0 [2025-09-23 22:41:04.909] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:41:06.492] SBL2:1210.0.1.0 [2025-09-23 22:41:06.524] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:41:06.636] j-A [2025-09-23 22:41:13.976] The R5 Autosar Classic is running [2025-09-23 22:41:14.001] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:41:14.001] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:41:14.608] INIT: version 2.96 booting [2025-09-23 22:41:14.720] INIT: Entering runlevel: 5 [2025-09-23 22:41:14.880] mtd32 attached [2025-09-23 22:41:14.880] mtd28 attached [2025-09-23 22:41:14.896] mtd24 attached [2025-09-23 22:41:14.944] ubi0:dml_code is mounted. [2025-09-23 22:41:14.944] RTNETLINK answers: File exists [2025-09-23 22:41:15.006] ubi1:animations is mounted. [2025-09-23 22:41:15.006] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:41:15.006] ubi2:textures is mounted. [2025-09-23 22:41:15.006] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:41:15.006] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:41:15.006] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:41:15.006] data.LB_FadeInType0=100 [2025-09-23 22:41:15.006] data.CHLH_FadeInType0=0 [2025-09-23 22:41:15.006] data.WU_FadeInDelay=0 [2025-09-23 22:41:15.006] max_time_out=0 [2025-09-23 22:41:15.006] No splash screen [2025-09-23 22:41:15.006] stop dss Done [2025-09-23 22:41:15.006] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:41:15.079] /dev/mem opened. [2025-09-23 22:41:15.079] Memory mapped at address 0xffffaf812000. [2025-09-23 22:41:15.079] Read at address 0x00600018 (0xffffaf812018): 0x00000000 [2025-09-23 22:41:15.079] Write at address 0x00600018 (0xffffaf812018): 0x00400040, readback 0x00400040 [2025-09-23 22:41:15.079] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:41:15.079] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:41:15.239] Loaded PowerVR consumer services. [2025-09-23 22:41:15.349] Waiting data available... [2025-09-23 22:41:15.349] 512+0 records in [2025-09-23 22:41:15.349] 512+0 records out [2025-09-23 22:41:15.365] Starting syslogd/klogd: done [2025-09-23 22:41:15.381] DML Start [2025-09-23 22:41:15.589] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:41:15.814] DML res1: 0 [2025-09-23 22:41:16.213] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:41:16.234] Read Success [2025-09-23 22:41:16.234] Verifying certificate... [2025-09-23 22:41:16.506] Verified OK [2025-09-23 22:41:16.522] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:41:18.152] Verified OK [2025-09-23 22:41:18.175] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:41:18.790] Verified OK [2025-09-23 22:41:18.790] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:41:21.491] fs.protected_hardlinks = 1 [2025-09-23 22:41:21.491] fs.protected_symlinks = 1 [2025-09-23 22:41:21.507] kernel.modules_disabled = 1 [2025-09-23 22:41:21.683] [2025-09-23 22:41:21.683] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:41:22.866] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:41:30.608] SBL1:1210.0.1.0 [2025-09-23 22:41:30.656] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:41:32.223] SBL2:1210.0.1.0 [2025-09-23 22:41:32.271] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:41:32.367] j-A [2025-09-23 22:41:39.723] The R5 Autosar Classic is running [2025-09-23 22:41:39.723] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:41:39.744] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:41:40.351] INIT: version 2.96 booting [2025-09-23 22:41:40.463] INIT: Entering runlevel: 5 [2025-09-23 22:41:40.607] mtd32 attached [2025-09-23 22:41:40.623] mtd24 attached [2025-09-23 22:41:40.639] mtd28 attached [2025-09-23 22:41:40.687] ubi0:dml_code is mounted. [2025-09-23 22:41:40.687] RTNETLINK answers: File exists [2025-09-23 22:41:40.739] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:41:40.739] ubi1:textures is mounted. [2025-09-23 22:41:40.739] ubi2:animations is mounted. [2025-09-23 22:41:40.739] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:41:40.739] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:41:40.739] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:41:40.739] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:41:40.739] data.LB_FadeInType0=100 [2025-09-23 22:41:40.739] data.CHLH_FadeInType0=0 [2025-09-23 22:41:40.739] data.WU_FadeInDelay=0 [2025-09-23 22:41:40.739] max_time_out=0 [2025-09-23 22:41:40.739] No splash screen [2025-09-23 22:41:40.739] stop dss Done [2025-09-23 22:41:40.822] /dev/mem opened. [2025-09-23 22:41:40.822] Memory mapped at address 0xffff81447000. [2025-09-23 22:41:40.822] Read at address 0x00600018 (0xffff81447018): 0x00000000 [2025-09-23 22:41:40.822] Write at address 0x00600018 (0xffff81447018): 0x00400040, readback 0x00400040 [2025-09-23 22:41:40.822] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:41:40.822] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:41:41.014] Loaded PowerVR consumer services. [2025-09-23 22:41:41.062] Waiting data available... [2025-09-23 22:41:41.094] 512+0 records in [2025-09-23 22:41:41.094] 512+0 records out [2025-09-23 22:41:41.126] Starting syslogd/klogd: done [2025-09-23 22:41:41.157] DML Start [2025-09-23 22:41:41.333] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:41:41.510] DML res1: 0 [2025-09-23 22:41:42.005] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:41:42.026] Read Success [2025-09-23 22:41:42.026] Verifying certificate... [2025-09-23 22:41:42.266] Verified OK [2025-09-23 22:41:42.282] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:41:43.928] Verified OK [2025-09-23 22:41:43.928] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:41:44.445] Verified OK [2025-09-23 22:41:44.445] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:41:46.955] fs.protected_hardlinks = 1 [2025-09-23 22:41:46.955] fs.protected_symlinks = 1 [2025-09-23 22:41:46.971] kernel.modules_disabled = 1 [2025-09-23 22:41:47.180] [2025-09-23 22:41:47.180] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:41:48.577] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:41:56.356] SBL1:1210.0.1.0 [2025-09-23 22:41:56.388] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:41:57.972] SBL2:1210.0.1.0 [2025-09-23 22:41:58.004] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:41:58.115] j-A [2025-09-23 22:42:05.488] The R5 Autosar Classic is running [2025-09-23 22:42:05.488] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:42:05.488] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:42:06.095] INIT: version 2.96 booting [2025-09-23 22:42:06.207] INIT: Entering runlevel: 5 [2025-09-23 22:42:06.351] mtd24 attached [2025-09-23 22:42:06.367] mtd32 attached [2025-09-23 22:42:06.399] mtd28 attached [2025-09-23 22:42:06.399] ubi0:textures is mounted. [2025-09-23 22:42:06.414] ubi1:dml_code is mounted. [2025-09-23 22:42:06.430] RTNETLINK answers: File exists [2025-09-23 22:42:06.430] ubi2:animations is mounted. [2025-09-23 22:42:06.487] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:42:06.487] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:42:06.487] data.LB_FadeInType0=100 [2025-09-23 22:42:06.487] data.CHLH_FadeInType0=0 [2025-09-23 22:42:06.487] data.WU_FadeInDelay=0 [2025-09-23 22:42:06.487] max_time_out=0 [2025-09-23 22:42:06.487] No splash screen [2025-09-23 22:42:06.487] stop dss Done [2025-09-23 22:42:06.487] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:42:06.487] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:42:06.487] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:42:06.535] /dev/mem opened. [2025-09-23 22:42:06.567] Memory mapped at address 0xffffa7485000. [2025-09-23 22:42:06.567] Read at address 0x00600018 (0xffffa7485018): 0x00000000 [2025-09-23 22:42:06.567] Write at address 0x00600018 (0xffffa7485018): 0x00400040, readback 0x00400040 [2025-09-23 22:42:06.567] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:42:06.583] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:42:06.679] Loaded PowerVR consumer services. [2025-09-23 22:42:06.836] Waiting data available... [2025-09-23 22:42:06.836] 512+0 records in [2025-09-23 22:42:06.836] 512+0 records out [2025-09-23 22:42:06.884] Starting syslogd/klogd: done [2025-09-23 22:42:06.900] DML Start [2025-09-23 22:42:07.123] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:42:07.331] DML res1: 0 [2025-09-23 22:42:07.725] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:42:07.725] Read Success [2025-09-23 22:42:07.725] Verifying certificate... [2025-09-23 22:42:07.997] Verified OK [2025-09-23 22:42:08.013] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:42:09.830] Verified OK [2025-09-23 22:42:09.830] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:42:10.387] Verified OK [2025-09-23 22:42:10.387] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:42:12.864] fs.protected_hardlinks = 1 [2025-09-23 22:42:12.864] fs.protected_symlinks = 1 [2025-09-23 22:42:12.880] kernel.modules_disabled = 1 [2025-09-23 22:42:13.073] [2025-09-23 22:42:13.073] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:42:14.427] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:42:22.103] SBL1:1210.0.1.0 [2025-09-23 22:42:22.151] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:42:23.717] SBL2:1210.0.1.0 [2025-09-23 22:42:23.749] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:42:23.861] j-A [2025-09-23 22:42:31.236] The R5 Autosar Classic is running [2025-09-23 22:42:31.236] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:42:31.236] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:42:31.844] INIT: version 2.96 booting [2025-09-23 22:42:31.956] INIT: Entering runlevel: 5 [2025-09-23 22:42:32.116] mtd32 attached [2025-09-23 22:42:32.116] mtd28 attached [2025-09-23 22:42:32.132] mtd24 attached [2025-09-23 22:42:32.180] RTNETLINK answers: File exists [2025-09-23 22:42:32.223] ubi1:animations is mounted. [2025-09-23 22:42:32.223] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:42:32.223] ubi2:textures is mounted. [2025-09-23 22:42:32.223] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:42:32.223] ubi0:dml_code is mounted. [2025-09-23 22:42:32.223] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:42:32.223] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:42:32.223] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:42:32.244] data.LB_FadeInType0=100 [2025-09-23 22:42:32.244] data.CHLH_FadeInType0=0 [2025-09-23 22:42:32.244] data.WU_FadeInDelay=0 [2025-09-23 22:42:32.244] max_time_out=0 [2025-09-23 22:42:32.244] No splash screen [2025-09-23 22:42:32.244] stop dss Done [2025-09-23 22:42:32.300] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:42:32.300] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:42:32.341] /dev/mem opened. [2025-09-23 22:42:32.341] Memory mapped at address 0xffff91057000. [2025-09-23 22:42:32.341] Read at address 0x00600018 (0xffff91057018): 0x00000000 [2025-09-23 22:42:32.341] Write at address 0x00600018 (0xffff91057018): 0x00400040, readback 0x00400040 [2025-09-23 22:42:32.438] Loaded PowerVR consumer services. [2025-09-23 22:42:32.566] 512+0 records in [2025-09-23 22:42:32.566] 512+0 records out [2025-09-23 22:42:32.566] Waiting data available... [2025-09-23 22:42:32.614] Starting syslogd/klogd: done [2025-09-23 22:42:32.630] DML Start [2025-09-23 22:42:32.806] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:42:33.029] DML res1: 0 [2025-09-23 22:42:33.445] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:42:33.466] Read Success [2025-09-23 22:42:33.466] Verifying certificate... [2025-09-23 22:42:33.690] Verified OK [2025-09-23 22:42:33.706] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:42:35.529] Verified OK [2025-09-23 22:42:35.529] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:42:36.086] Verified OK [2025-09-23 22:42:36.086] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:42:38.468] fs.protected_hardlinks = 1 [2025-09-23 22:42:38.468] fs.protected_symlinks = 1 [2025-09-23 22:42:38.484] kernel.modules_disabled = 1 [2025-09-23 22:42:38.692] [2025-09-23 22:42:38.692] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:42:40.066] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:42:47.844] SBL1:1210.0.1.0 [2025-09-23 22:42:47.891] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:42:49.458] SBL2:1210.0.1.0 [2025-09-23 22:42:49.506] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:42:49.602] j-A [2025-09-23 22:42:56.956] The R5 Autosar Classic is running [2025-09-23 22:42:56.980] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:42:56.980] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:42:57.588] INIT: version 2.96 booting [2025-09-23 22:42:57.700] INIT: Entering runlevel: 5 [2025-09-23 22:42:57.861] mtd32 attached [2025-09-23 22:42:57.861] mtd24 attached [2025-09-23 22:42:57.876] mtd28 attached [2025-09-23 22:42:57.924] ubi0:dml_code is mounted. [2025-09-23 22:42:57.924] RTNETLINK answers: File exists [2025-09-23 22:42:57.947] ubi1:textures is mounted. [2025-09-23 22:42:57.947] ubi2:animations is mounted. [2025-09-23 22:42:57.947] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:42:57.984] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:42:57.984] data.LB_FadeInType0=100 [2025-09-23 22:42:57.984] data.CHLH_FadeInType0=0 [2025-09-23 22:42:57.984] data.WU_FadeInDelay=0 [2025-09-23 22:42:57.984] max_time_out=0 [2025-09-23 22:42:57.984] No splash screen [2025-09-23 22:42:57.984] stop dss Done [2025-09-23 22:42:57.984] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:42:57.984] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:42:58.000] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:42:58.053] /dev/mem opened. [2025-09-23 22:42:58.053] Memory mapped at address 0xffffbea96000. [2025-09-23 22:42:58.053] Read at address 0x00600018 (0xffffbea96018): 0x00000000 [2025-09-23 22:42:58.053] Write at address 0x00600018 (0xffffbea96018): 0x00400040, readback 0x00400040 [2025-09-23 22:42:58.116] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:42:58.145] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:42:58.225] Loaded PowerVR consumer services. [2025-09-23 22:42:58.330] Waiting data available... [2025-09-23 22:42:58.330] 512+0 records in [2025-09-23 22:42:58.330] 512+0 records out [2025-09-23 22:42:58.362] Starting syslogd/klogd: done [2025-09-23 22:42:58.378] DML Start [2025-09-23 22:42:58.537] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:42:58.761] DML res1: 0 [2025-09-23 22:42:59.210] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:42:59.210] Read Success [2025-09-23 22:42:59.226] Verifying certificate... [2025-09-23 22:42:59.497] Verified OK [2025-09-23 22:42:59.513] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:43:01.249] Verified OK [2025-09-23 22:43:01.249] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:43:01.825] Verified OK [2025-09-23 22:43:01.825] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:43:04.447] fs.protected_hardlinks = 1 [2025-09-23 22:43:04.447] fs.protected_symlinks = 1 [2025-09-23 22:43:04.447] kernel.modules_disabled = 1 [2025-09-23 22:43:04.639] [2025-09-23 22:43:04.639] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:43:05.854] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:43:13.595] SBL1:1210.0.1.0 [2025-09-23 22:43:13.627] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:43:15.210] SBL2:1210.0.1.0 [2025-09-23 22:43:15.242] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:43:15.354] j-A [2025-09-23 22:43:22.724] The R5 Autosar Classic is running [2025-09-23 22:43:22.724] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:43:22.724] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:43:23.332] INIT: version 2.96 booting [2025-09-23 22:43:23.444] INIT: Entering runlevel: 5 [2025-09-23 22:43:23.587] mtd24 attached [2025-09-23 22:43:23.603] mtd32 attached [2025-09-23 22:43:23.619] mtd28 attached [2025-09-23 22:43:23.667] RTNETLINK answers: File exists [2025-09-23 22:43:23.705] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:43:23.705] ubi2:animations is mounted. [2025-09-23 22:43:23.705] ubi0:textures is mounted. [2025-09-23 22:43:23.705] ubi1:dml_code is mounted. [2025-09-23 22:43:23.705] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:43:23.705] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:43:23.705] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:43:23.705] data.LB_FadeInType0=100 [2025-09-23 22:43:23.731] data.CHLH_FadeInType0=0 [2025-09-23 22:43:23.731] data.WU_FadeInDelay=0 [2025-09-23 22:43:23.731] max_time_out=0 [2025-09-23 22:43:23.731] No splash screen [2025-09-23 22:43:23.731] stop dss Done [2025-09-23 22:43:23.731] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:43:23.794] /dev/mem opened. [2025-09-23 22:43:23.794] Memory mapped at address 0xffffaea42000. [2025-09-23 22:43:23.794] Read at address 0x00600018 (0xffffaea42018): 0x00000000 [2025-09-23 22:43:23.794] Write at address 0x00600018 (0xffffaea42018): 0x00400040, readback 0x00400040 [2025-09-23 22:43:23.834] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:43:23.834] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:43:24.026] Loaded PowerVR consumer services. [2025-09-23 22:43:24.074] Waiting data available... [2025-09-23 22:43:24.090] 512+0 records in [2025-09-23 22:43:24.090] 512+0 records out [2025-09-23 22:43:24.122] Starting syslogd/klogd: done [2025-09-23 22:43:24.138] DML Start [2025-09-23 22:43:24.330] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:43:24.522] DML res1: 0 [2025-09-23 22:43:24.965] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:43:24.965] Read Success [2025-09-23 22:43:24.965] Verifying certificate... [2025-09-23 22:43:25.270] Verified OK [2025-09-23 22:43:25.286] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:43:26.965] Verified OK [2025-09-23 22:43:26.965] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:43:27.572] Verified OK [2025-09-23 22:43:27.572] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:43:30.179] fs.protected_hardlinks = 1 [2025-09-23 22:43:30.207] fs.protected_symlinks = 1 [2025-09-23 22:43:30.207] kernel.modules_disabled = 1 [2025-09-23 22:43:30.383] [2025-09-23 22:43:30.383] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:43:31.643] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:43:39.332] SBL1:1210.0.1.0 [2025-09-23 22:43:39.380] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:43:40.962] SBL2:1210.0.1.0 [2025-09-23 22:43:40.994] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:43:41.106] j-A [2025-09-23 22:43:48.476] The R5 Autosar Classic is running [2025-09-23 22:43:48.476] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:43:48.476] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:43:49.083] INIT: version 2.96 booting [2025-09-23 22:43:49.178] INIT: Entering runlevel: 5 [2025-09-23 22:43:49.339] mtd24 attached [2025-09-23 22:43:49.355] mtd28 attached [2025-09-23 22:43:49.371] mtd32 attached [2025-09-23 22:43:49.402] ubi0:textures is mounted. [2025-09-23 22:43:49.418] ubi1:animations is mounted. [2025-09-23 22:43:49.418] RTNETLINK answers: File exists [2025-09-23 22:43:49.478] ubi2:dml_code is mounted. [2025-09-23 22:43:49.478] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:43:49.478] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:43:49.478] data.LB_FadeInType0=100 [2025-09-23 22:43:49.478] data.CHLH_FadeInType0=0 [2025-09-23 22:43:49.478] data.WU_FadeInDelay=0 [2025-09-23 22:43:49.478] max_time_out=0 [2025-09-23 22:43:49.478] No splash screen [2025-09-23 22:43:49.478] stop dss Done [2025-09-23 22:43:49.478] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:43:49.478] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:43:49.478] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:43:49.526] /dev/mem opened. [2025-09-23 22:43:49.552] Memory mapped at address 0xffffb5f82000. [2025-09-23 22:43:49.552] Read at address 0x00600018 (0xffffb5f82018): 0x00000000 [2025-09-23 22:43:49.552] Write at address 0x00600018 (0xffffb5f82018): 0x00400040, readback 0x00400040 [2025-09-23 22:43:49.614] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:43:49.614] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:43:49.678] Loaded PowerVR consumer services. [2025-09-23 22:43:49.805] Waiting data available... [2025-09-23 22:43:49.821] 512+0 records in [2025-09-23 22:43:49.821] 512+0 records out [2025-09-23 22:43:49.869] Starting syslogd/klogd: done [2025-09-23 22:43:49.885] DML Start [2025-09-23 22:43:50.045] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:43:50.301] DML res1: 0 [2025-09-23 22:43:50.727] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:43:50.727] Read Success [2025-09-23 22:43:50.727] Verifying certificate... [2025-09-23 22:43:50.951] Verified OK [2025-09-23 22:43:50.967] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:43:52.669] Verified OK [2025-09-23 22:43:52.669] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:43:53.205] Verified OK [2025-09-23 22:43:53.205] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:43:55.715] fs.protected_hardlinks = 1 [2025-09-23 22:43:55.744] fs.protected_symlinks = 1 [2025-09-23 22:43:55.744] kernel.modules_disabled = 1 [2025-09-23 22:43:55.920] [2025-09-23 22:43:55.920] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:43:57.380] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:44:05.090] SBL1:1210.0.1.0 [2025-09-23 22:44:05.138] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:44:06.704] SBL2:1210.0.1.0 [2025-09-23 22:44:06.736] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:44:06.847] j-A [2025-09-23 22:44:14.202] The R5 Autosar Classic is running [2025-09-23 22:44:14.202] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:44:14.222] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:44:14.830] INIT: version 2.96 booting [2025-09-23 22:44:14.941] INIT: Entering runlevel: 5 [2025-09-23 22:44:15.102] mtd24 attached [2025-09-23 22:44:15.102] mtd28 attached [2025-09-23 22:44:15.118] mtd32 attached [2025-09-23 22:44:15.237] RTNETLINK answers: File exists [2025-09-23 22:44:15.237] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:44:15.237] ubi1:animations is mounted. [2025-09-23 22:44:15.237] ubi0:textures is mounted. [2025-09-23 22:44:15.237] ubi2:dml_code is mounted. [2025-09-23 22:44:15.237] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:44:15.237] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:44:15.237] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:44:15.237] data.LB_FadeInType0=100 [2025-09-23 22:44:15.237] data.CHLH_FadeInType0=0 [2025-09-23 22:44:15.237] data.WU_FadeInDelay=0 [2025-09-23 22:44:15.237] max_time_out=0 [2025-09-23 22:44:15.237] No splash screen [2025-09-23 22:44:15.237] stop dss Done [2025-09-23 22:44:15.237] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:44:15.286] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:44:15.320] /dev/mem opened. [2025-09-23 22:44:15.320] Memory mapped at address 0xffff8d6f1000. [2025-09-23 22:44:15.320] Read at address 0x00600018 (0xffff8d6f1018): 0x00000000 [2025-09-23 22:44:15.320] Write at address 0x00600018 (0xffff8d6f1018): 0x00400040, readback 0x00400040 [2025-09-23 22:44:15.320] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:44:15.431] Loaded PowerVR consumer services. [2025-09-23 22:44:15.559] Waiting data available... [2025-09-23 22:44:15.575] 512+0 records in [2025-09-23 22:44:15.575] 512+0 records out [2025-09-23 22:44:15.607] Starting syslogd/klogd: done [2025-09-23 22:44:15.623] DML Start [2025-09-23 22:44:15.783] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:44:16.022] DML res1: 0 [2025-09-23 22:44:16.470] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:44:16.486] Read Success [2025-09-23 22:44:16.486] Verifying certificate... [2025-09-23 22:44:16.710] Verified OK [2025-09-23 22:44:16.726] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:44:18.437] Verified OK [2025-09-23 22:44:18.437] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:44:19.073] Verified OK [2025-09-23 22:44:19.073] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:44:21.712] fs.protected_hardlinks = 1 [2025-09-23 22:44:21.712] fs.protected_symlinks = 1 [2025-09-23 22:44:21.728] kernel.modules_disabled = 1 [2025-09-23 22:44:21.903] [2025-09-23 22:44:21.903] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:44:23.099] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:44:30.845] SBL1:1210.0.1.0 [2025-09-23 22:44:30.893] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:44:32.460] SBL2:1210.0.1.0 [2025-09-23 22:44:32.507] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:44:32.603] j-A [2025-09-23 22:44:39.959] The R5 Autosar Classic is running [2025-09-23 22:44:39.981] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:44:39.981] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:44:40.589] INIT: version 2.96 booting [2025-09-23 22:44:40.701] INIT: Entering runlevel: 5 [2025-09-23 22:44:40.844] mtd24 attached [2025-09-23 22:44:40.860] mtd28 attached [2025-09-23 22:44:40.876] mtd32 attached [2025-09-23 22:44:40.980] RTNETLINK answers: File exists [2025-09-23 22:44:40.980] ubi0:textures is mounted. [2025-09-23 22:44:40.980] ubi2:dml_code is mounted. [2025-09-23 22:44:40.980] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:44:40.980] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:44:40.980] ubi1:animations is mounted. [2025-09-23 22:44:40.980] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:44:40.980] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:44:40.980] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:44:40.980] data.LB_FadeInType0=100 [2025-09-23 22:44:40.980] data.CHLH_FadeInType0=0 [2025-09-23 22:44:40.980] data.WU_FadeInDelay=0 [2025-09-23 22:44:40.980] max_time_out=0 [2025-09-23 22:44:40.980] No splash screen [2025-09-23 22:44:40.980] stop dss Done [2025-09-23 22:44:41.028] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:44:41.064] /dev/mem opened. [2025-09-23 22:44:41.064] Memory mapped at address 0xffff9d52f000. [2025-09-23 22:44:41.064] Read at address 0x00600018 (0xffff9d52f018): 0x00000000 [2025-09-23 22:44:41.064] Write at address 0x00600018 (0xffff9d52f018): 0x00400040, readback 0x00400040 [2025-09-23 22:44:41.064] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:44:41.176] Loaded PowerVR consumer services. [2025-09-23 22:44:41.303] Waiting data available... [2025-09-23 22:44:41.320] 512+0 records in [2025-09-23 22:44:41.320] 512+0 records out [2025-09-23 22:44:41.368] Starting syslogd/klogd: done [2025-09-23 22:44:41.384] DML Start [2025-09-23 22:44:41.592] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:44:41.816] DML res1: 0 [2025-09-23 22:44:42.188] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:44:42.188] Read Success [2025-09-23 22:44:42.188] Verifying certificate... [2025-09-23 22:44:42.412] Verified OK [2025-09-23 22:44:42.428] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:44:44.001] Verified OK [2025-09-23 22:44:44.001] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:44:44.600] Verified OK [2025-09-23 22:44:44.600] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:44:47.287] fs.protected_hardlinks = 1 [2025-09-23 22:44:47.303] fs.protected_symlinks = 1 [2025-09-23 22:44:47.303] kernel.modules_disabled = 1 [2025-09-23 22:44:47.510] [2025-09-23 22:44:47.510] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:44:48.916] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:44:56.605] SBL1:1210.0.1.0 [2025-09-23 22:44:56.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:44:58.220] SBL2:1210.0.1.0 [2025-09-23 22:44:58.268] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:44:58.363] j-A [2025-09-23 22:45:05.718] The R5 Autosar Classic is running [2025-09-23 22:45:05.742] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:45:05.742] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:45:06.350] INIT: version 2.96 booting [2025-09-23 22:45:06.461] INIT: Entering runlevel: 5 [2025-09-23 22:45:06.621] mtd24 attached [2025-09-23 22:45:06.621] mtd28 attached [2025-09-23 22:45:06.653] ubi0:textures is mounted. [2025-09-23 22:45:06.669] mtd32 attached [2025-09-23 22:45:06.669] ubi1:animations is mounted. [2025-09-23 22:45:06.746] RTNETLINK answers: File exists [2025-09-23 22:45:06.746] ubi2:dml_code is mounted. [2025-09-23 22:45:06.746] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:45:06.746] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:45:06.746] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:45:06.746] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:45:06.746] data.LB_FadeInType0=100 [2025-09-23 22:45:06.746] data.CHLH_FadeInType0=0 [2025-09-23 22:45:06.746] data.WU_FadeInDelay=0 [2025-09-23 22:45:06.746] max_time_out=0 [2025-09-23 22:45:06.746] No splash screen [2025-09-23 22:45:06.746] stop dss Done [2025-09-23 22:45:06.746] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:45:06.814] /dev/mem opened. [2025-09-23 22:45:06.814] Memory mapped at address 0xffff903ba000. [2025-09-23 22:45:06.814] Read at address 0x00600018 (0xffff903ba018): 0x00000000 [2025-09-23 22:45:06.814] Write at address 0x00600018 (0xffff903ba018): 0x00400040, readback 0x00400040 [2025-09-23 22:45:06.846] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:45:06.878] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:45:07.053] Loaded PowerVR consumer services. [2025-09-23 22:45:07.102] Waiting data available... [2025-09-23 22:45:07.118] 512+0 records in [2025-09-23 22:45:07.118] 512+0 records out [2025-09-23 22:45:07.166] Starting syslogd/klogd: done [2025-09-23 22:45:07.182] DML Start [2025-09-23 22:45:07.326] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:45:07.581] DML res1: 0 [2025-09-23 22:45:08.035] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:45:08.035] Read Success [2025-09-23 22:45:08.035] Verifying certificate... [2025-09-23 22:45:08.275] Verified OK [2025-09-23 22:45:08.307] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:45:09.976] Verified OK [2025-09-23 22:45:09.976] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:45:10.588] Verified OK [2025-09-23 22:45:10.588] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:45:13.130] fs.protected_hardlinks = 1 [2025-09-23 22:45:13.130] fs.protected_symlinks = 1 [2025-09-23 22:45:13.146] kernel.modules_disabled = 1 [2025-09-23 22:45:13.322] [2025-09-23 22:45:13.322] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:45:14.656] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:45:22.352] SBL1:1210.0.1.0 [2025-09-23 22:45:22.400] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:45:23.967] SBL2:1210.0.1.0 [2025-09-23 22:45:24.015] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:45:24.110] j-A [2025-09-23 22:45:31.465] The R5 Autosar Classic is running [2025-09-23 22:45:31.465] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:45:31.487] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:45:32.095] INIT: version 2.96 booting [2025-09-23 22:45:32.206] INIT: Entering runlevel: 5 [2025-09-23 22:45:32.350] mtd24 attached [2025-09-23 22:45:32.366] mtd28 attached [2025-09-23 22:45:32.382] mtd32 attached [2025-09-23 22:45:32.482] RTNETLINK answers: File exists [2025-09-23 22:45:32.482] ubi1:animations is mounted. [2025-09-23 22:45:32.482] ubi0:textures is mounted. [2025-09-23 22:45:32.482] ubi2:dml_code is mounted. [2025-09-23 22:45:32.482] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:45:32.482] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:45:32.482] data.LB_FadeInType0=100 [2025-09-23 22:45:32.482] data.CHLH_FadeInType0=0 [2025-09-23 22:45:32.482] data.WU_FadeInDelay=0 [2025-09-23 22:45:32.482] max_time_out=0 [2025-09-23 22:45:32.482] No splash screen [2025-09-23 22:45:32.482] stop dss Done [2025-09-23 22:45:32.482] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:45:32.482] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:45:32.482] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:45:32.552] /dev/mem opened. [2025-09-23 22:45:32.552] Memory mapped at address 0xffff82e37000. [2025-09-23 22:45:32.552] Read at address 0x00600018 (0xffff82e37018): 0x00000000 [2025-09-23 22:45:32.552] Write at address 0x00600018 (0xffff82e37018): 0x00400040, readback 0x00400040 [2025-09-23 22:45:32.552] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:45:32.569] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:45:32.697] Loaded PowerVR consumer services. [2025-09-23 22:45:32.808] Waiting data available... [2025-09-23 22:45:32.824] 512+0 records in [2025-09-23 22:45:32.824] 512+0 records out [2025-09-23 22:45:32.856] Starting syslogd/klogd: done [2025-09-23 22:45:32.872] DML Start [2025-09-23 22:45:33.080] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:45:33.304] DML res1: 0 [2025-09-23 22:45:33.704] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:45:33.725] Read Success [2025-09-23 22:45:33.725] Verifying certificate... [2025-09-23 22:45:33.948] Verified OK [2025-09-23 22:45:33.964] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:45:35.644] Verified OK [2025-09-23 22:45:35.659] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:45:36.306] Verified OK [2025-09-23 22:45:36.306] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:45:39.023] fs.protected_hardlinks = 1 [2025-09-23 22:45:39.051] fs.protected_symlinks = 1 [2025-09-23 22:45:39.051] kernel.modules_disabled = 1 [2025-09-23 22:45:39.227] [2025-09-23 22:45:39.227] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:45:40.371] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:45:48.115] SBL1:1210.0.1.0 [2025-09-23 22:45:48.147] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:45:49.730] SBL2:1210.0.1.0 [2025-09-23 22:45:49.762] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:45:49.874] j-A [2025-09-23 22:45:57.246] The R5 Autosar Classic is running [2025-09-23 22:45:57.246] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:45:57.246] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:45:57.853] INIT: version 2.96 booting [2025-09-23 22:45:57.949] INIT: Entering runlevel: 5 [2025-09-23 22:45:58.108] mtd32 attached [2025-09-23 22:45:58.126] mtd28 attached [2025-09-23 22:45:58.142] mtd24 attached [2025-09-23 22:45:58.158] ubi0:dml_code is mounted. [2025-09-23 22:45:58.189] RTNETLINK answers: File exists [2025-09-23 22:45:58.189] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:45:58.240] ubi1:animations is mounted. [2025-09-23 22:45:58.240] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:45:58.240] ubi2:textures is mounted. [2025-09-23 22:45:58.240] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:45:58.240] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:45:58.240] data.LB_FadeInType0=100 [2025-09-23 22:45:58.240] data.CHLH_FadeInType0=0 [2025-09-23 22:45:58.240] data.WU_FadeInDelay=0 [2025-09-23 22:45:58.240] max_time_out=0 [2025-09-23 22:45:58.240] No splash screen [2025-09-23 22:45:58.240] stop dss Done [2025-09-23 22:45:58.240] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:45:58.306] /dev/mem opened. [2025-09-23 22:45:58.306] Memory mapped at address 0xffffae4d3000. [2025-09-23 22:45:58.306] Read at address 0x00600018 (0xffffae4d3018): 0x00000000 [2025-09-23 22:45:58.306] Write at address 0x00600018 (0xffffae4d3018): 0x00400040, readback 0x00400040 [2025-09-23 22:45:58.322] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:45:58.338] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:45:58.562] Loaded PowerVR consumer services. [2025-09-23 22:45:58.605] Waiting data available... [2025-09-23 22:45:58.605] 512+0 records in [2025-09-23 22:45:58.605] 512+0 records out [2025-09-23 22:45:58.637] Starting syslogd/klogd: done [2025-09-23 22:45:58.653] DML Start [2025-09-23 22:45:58.812] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:45:59.036] DML res1: 0 [2025-09-23 22:45:59.468] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:45:59.489] Read Success [2025-09-23 22:45:59.489] Verifying certificate... [2025-09-23 22:45:59.746] Verified OK [2025-09-23 22:45:59.762] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:46:01.456] Verified OK [2025-09-23 22:46:01.456] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:46:02.031] Verified OK [2025-09-23 22:46:02.031] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:46:04.604] fs.protected_hardlinks = 1 [2025-09-23 22:46:04.604] fs.protected_symlinks = 1 [2025-09-23 22:46:04.604] kernel.modules_disabled = 1 [2025-09-23 22:46:04.796] [2025-09-23 22:46:04.796] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:46:06.091] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:46:13.879] SBL1:1210.0.1.0 [2025-09-23 22:46:13.911] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 22:46:15.494] SBL2:1210.0.1.0 [2025-09-23 22:46:15.526] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:46:15.639] j-A [2025-09-23 22:46:23.013] The R5 Autosar Classic is running [2025-09-23 22:46:23.013] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:46:23.013] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:46:23.621] INIT: version 2.96 booting [2025-09-23 22:46:23.732] INIT: Entering runlevel: 5 [2025-09-23 22:46:23.893] mtd24 attached [2025-09-23 22:46:23.908] mtd28 attached [2025-09-23 22:46:23.925] mtd32 attached [2025-09-23 22:46:23.941] ubi0:textures is mounted. [2025-09-23 22:46:23.957] RTNETLINK answers: File exists [2025-09-23 22:46:24.024] ubi1:animations is mounted. [2025-09-23 22:46:24.024] ubi2:dml_code is mounted. [2025-09-23 22:46:24.024] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:46:24.024] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:46:24.024] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:46:24.024] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:46:24.024] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:46:24.024] data.LB_FadeInType0=100 [2025-09-23 22:46:24.024] data.CHLH_FadeInType0=0 [2025-09-23 22:46:24.024] data.WU_FadeInDelay=0 [2025-09-23 22:46:24.024] max_time_out=0 [2025-09-23 22:46:24.024] No splash screen [2025-09-23 22:46:24.024] stop dss Done [2025-09-23 22:46:24.039] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:46:24.061] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:46:24.097] /dev/mem opened. [2025-09-23 22:46:24.097] Memory mapped at address 0xffff93946000. [2025-09-23 22:46:24.097] Read at address 0x00600018 (0xffff93946018): 0x00000000 [2025-09-23 22:46:24.097] Write at address 0x00600018 (0xffff93946018): 0x00400040, readback 0x00400040 [2025-09-23 22:46:24.177] Loaded PowerVR consumer services. [2025-09-23 22:46:24.337] Waiting data available... [2025-09-23 22:46:24.354] 512+0 records in [2025-09-23 22:46:24.354] 512+0 records out [2025-09-23 22:46:24.369] Starting syslogd/klogd: done [2025-09-23 22:46:24.401] DML Start [2025-09-23 22:46:24.545] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:46:24.801] DML res1: 0 [2025-09-23 22:46:25.225] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:46:25.225] Read Success [2025-09-23 22:46:25.225] Verifying certificate... [2025-09-23 22:46:25.514] Verified OK [2025-09-23 22:46:25.545] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:46:27.175] Verified OK [2025-09-23 22:46:27.175] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:46:27.810] Verified OK [2025-09-23 22:46:27.810] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:46:30.561] fs.protected_hardlinks = 1 [2025-09-23 22:46:30.561] fs.protected_symlinks = 1 [2025-09-23 22:46:30.577] kernel.modules_disabled = 1 [2025-09-23 22:46:30.768] [2025-09-23 22:46:30.768] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:46:31.896] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:46:39.617] SBL1:1210.0.1.0 [2025-09-23 22:46:39.665] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:46:41.232] SBL2:1210.0.1.0 [2025-09-23 22:46:41.280] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:46:41.376] j-A [2025-09-23 22:46:48.731] The R5 Autosar Classic is running [2025-09-23 22:46:48.732] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:46:48.752] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:46:49.359] INIT: version 2.96 booting [2025-09-23 22:46:49.471] INIT: Entering runlevel: 5 [2025-09-23 22:46:49.632] mtd28 attached [2025-09-23 22:46:49.632] mtd24 attached [2025-09-23 22:46:49.648] mtd32 attached [2025-09-23 22:46:49.680] ubi0:animations is mounted. [2025-09-23 22:46:49.696] ubi1:textures is mounted. [2025-09-23 22:46:49.696] RTNETLINK answers: File exists [2025-09-23 22:46:49.753] ubi2:dml_code is mounted. [2025-09-23 22:46:49.753] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:46:49.753] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:46:49.753] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:46:49.753] data.LB_FadeInType0=100 [2025-09-23 22:46:49.753] data.CHLH_FadeInType0=0 [2025-09-23 22:46:49.753] data.WU_FadeInDelay=0 [2025-09-23 22:46:49.753] max_time_out=0 [2025-09-23 22:46:49.753] No splash screen [2025-09-23 22:46:49.753] stop dss Done [2025-09-23 22:46:49.753] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:46:49.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:46:49.822] /dev/mem opened. [2025-09-23 22:46:49.822] Memory mapped at address 0xffffb97a5000. [2025-09-23 22:46:49.822] Read at address 0x00600018 (0xffffb97a5018): 0x00000000 [2025-09-23 22:46:49.822] Write at address 0x00600018 (0xffffb97a5018): 0x00400040, readback 0x00400040 [2025-09-23 22:46:49.822] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:46:49.854] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:46:49.950] Loaded PowerVR consumer services. [2025-09-23 22:46:50.093] Waiting data available... [2025-09-23 22:46:50.093] 512+0 records in [2025-09-23 22:46:50.093] 512+0 records out [2025-09-23 22:46:50.109] Starting syslogd/klogd: done [2025-09-23 22:46:50.125] DML Start [2025-09-23 22:46:50.317] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:46:50.541] DML res1: 0 [2025-09-23 22:46:50.996] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:46:50.996] Read Success [2025-09-23 22:46:50.996] Verifying certificate... [2025-09-23 22:46:51.204] Verified OK [2025-09-23 22:46:51.220] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:46:52.771] Verified OK [2025-09-23 22:46:52.771] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:46:53.424] Verified OK [2025-09-23 22:46:53.424] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:46:56.143] fs.protected_hardlinks = 1 [2025-09-23 22:46:56.171] fs.protected_symlinks = 1 [2025-09-23 22:46:56.171] kernel.modules_disabled = 1 [2025-09-23 22:46:56.363] [2025-09-23 22:46:56.363] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:46:57.616] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:47:05.383] SBL1:1210.0.1.0 [2025-09-23 22:47:05.415] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:47:06.997] SBL2:1210.0.1.0 [2025-09-23 22:47:07.029] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:47:07.141] j-A [2025-09-23 22:47:14.516] The R5 Autosar Classic is running [2025-09-23 22:47:14.516] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:47:14.516] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:47:15.123] INIT: version 2.96 booting [2025-09-23 22:47:15.219] INIT: Entering runlevel: 5 [2025-09-23 22:47:15.379] mtd28 attached [2025-09-23 22:47:15.395] mtd32 attached [2025-09-23 22:47:15.395] mtd24 attached [2025-09-23 22:47:15.443] RTNETLINK answers: File exists [2025-09-23 22:47:15.491] ubi0:animations is mounted. [2025-09-23 22:47:15.491] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:47:15.491] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:47:15.491] ubi1:dml_code is mounted. [2025-09-23 22:47:15.491] ubi2:textures is mounted. [2025-09-23 22:47:15.491] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:47:15.491] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:47:15.491] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:47:15.513] data.LB_FadeInType0=100 [2025-09-23 22:47:15.513] data.CHLH_FadeInType0=0 [2025-09-23 22:47:15.513] data.WU_FadeInDelay=0 [2025-09-23 22:47:15.513] max_time_out=0 [2025-09-23 22:47:15.513] No splash screen [2025-09-23 22:47:15.513] stop dss Done [2025-09-23 22:47:15.601] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:47:15.601] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:47:15.601] /dev/mem opened. [2025-09-23 22:47:15.601] Memory mapped at address 0xffffb2375000. [2025-09-23 22:47:15.601] Read at address 0x00600018 (0xffffb2375018): 0x00000000 [2025-09-23 22:47:15.601] Write at address 0x00600018 (0xffffb2375018): 0x00400040, readback 0x00400040 [2025-09-23 22:47:15.712] Loaded PowerVR consumer services. [2025-09-23 22:47:15.841] Waiting data available... [2025-09-23 22:47:15.857] 512+0 records in [2025-09-23 22:47:15.857] 512+0 records out [2025-09-23 22:47:15.905] Starting syslogd/klogd: done [2025-09-23 22:47:15.921] DML Start [2025-09-23 22:47:16.112] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:47:16.336] DML res1: 0 [2025-09-23 22:47:16.752] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:47:16.773] Read Success [2025-09-23 22:47:16.773] Verifying certificate... [2025-09-23 22:47:17.029] Verified OK [2025-09-23 22:47:17.045] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:47:18.842] Verified OK [2025-09-23 22:47:18.842] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:47:19.390] Verified OK [2025-09-23 22:47:19.390] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:47:21.902] fs.protected_hardlinks = 1 [2025-09-23 22:47:21.902] fs.protected_symlinks = 1 [2025-09-23 22:47:21.917] kernel.modules_disabled = 1 [2025-09-23 22:47:22.109] [2025-09-23 22:47:22.109] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:47:23.388] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:47:31.151] SBL1:1210.0.1.0 [2025-09-23 22:47:31.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:47:32.765] SBL2:1210.0.1.0 [2025-09-23 22:47:32.813] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:47:32.910] j-A [2025-09-23 22:47:40.263] The R5 Autosar Classic is running [2025-09-23 22:47:40.285] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:47:40.285] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:47:40.893] INIT: version 2.96 booting [2025-09-23 22:47:41.004] INIT: Entering runlevel: 5 [2025-09-23 22:47:41.165] mtd28 attached [2025-09-23 22:47:41.165] mtd24 attached [2025-09-23 22:47:41.197] mtd32 attached [2025-09-23 22:47:41.213] ubi0:animations is mounted. [2025-09-23 22:47:41.229] RTNETLINK answers: File exists [2025-09-23 22:47:41.271] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:47:41.271] ubi1:textures is mounted. [2025-09-23 22:47:41.271] ubi2:dml_code is mounted. [2025-09-23 22:47:41.271] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:47:41.271] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:47:41.271] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:47:41.298] data.LB_FadeInType0=100 [2025-09-23 22:47:41.298] data.CHLH_FadeInType0=0 [2025-09-23 22:47:41.298] data.WU_FadeInDelay=0 [2025-09-23 22:47:41.298] max_time_out=0 [2025-09-23 22:47:41.298] No splash screen [2025-09-23 22:47:41.298] stop dss Done [2025-09-23 22:47:41.298] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:47:41.345] /dev/mem opened. [2025-09-23 22:47:41.345] Memory mapped at address 0xffffb6183000. [2025-09-23 22:47:41.377] Read at address 0x00600018 (0xffffb6183018): 0x00000000 [2025-09-23 22:47:41.377] Write at address 0x00600018 (0xffffb6183018): 0x00400040, readback 0x00400040 [2025-09-23 22:47:41.377] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:47:41.377] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:47:41.457] Loaded PowerVR consumer services. [2025-09-23 22:47:41.617] Waiting data available... [2025-09-23 22:47:41.617] 512+0 records in [2025-09-23 22:47:41.633] 512+0 records out [2025-09-23 22:47:41.665] Starting syslogd/klogd: done [2025-09-23 22:47:42.272] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:47:42.272] Read Success [2025-09-23 22:47:42.272] Verifying certificate... [2025-09-23 22:47:42.464] Verified OK [2025-09-23 22:47:42.480] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:47:43.424] Verified OK [2025-09-23 22:47:43.440] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:47:43.871] Verified OK [2025-09-23 22:47:43.887] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:47:46.862] fs.protected_hardlinks = 1 [2025-09-23 22:47:46.862] fs.protected_symlinks = 1 [2025-09-23 22:47:46.878] kernel.modules_disabled = 1 [2025-09-23 22:47:47.053] [2025-09-23 22:47:47.053] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:47:49.669] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:47:56.897] SBL1:1210.0.1.0 [2025-09-23 22:47:56.945] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:47:58.511] SBL2:1210.0.1.0 [2025-09-23 22:47:58.543] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:47:58.656] j-A [2025-09-23 22:48:06.010] The R5 Autosar Classic is running [2025-09-23 22:48:06.010] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:48:06.031] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:48:06.638] INIT: version 2.96 booting [2025-09-23 22:48:06.749] INIT: Entering runlevel: 5 [2025-09-23 22:48:06.910] mtd24 attached [2025-09-23 22:48:06.910] mtd32 attached [2025-09-23 22:48:06.925] mtd28 attached [2025-09-23 22:48:06.973] ubi0:textures is mounted. [2025-09-23 22:48:06.973] RTNETLINK answers: File exists [2025-09-23 22:48:07.032] ubi1:dml_code is mounted. [2025-09-23 22:48:07.032] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:48:07.032] ubi2:animations is mounted. [2025-09-23 22:48:07.032] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:48:07.032] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:48:07.032] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:48:07.032] data.LB_FadeInType0=100 [2025-09-23 22:48:07.032] data.CHLH_FadeInType0=0 [2025-09-23 22:48:07.032] data.WU_FadeInDelay=0 [2025-09-23 22:48:07.032] max_time_out=0 [2025-09-23 22:48:07.032] No splash screen [2025-09-23 22:48:07.032] stop dss Done [2025-09-23 22:48:07.032] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:48:07.080] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:48:07.080] /dev/mem opened. [2025-09-23 22:48:07.112] Memory mapped at address 0xffffad6f8000. [2025-09-23 22:48:07.112] Read at address 0x00600018 (0xffffad6f8018): 0x00000000 [2025-09-23 22:48:07.112] Write at address 0x00600018 (0xffffad6f8018): 0x00400040, readback 0x00400040 [2025-09-23 22:48:07.112] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:48:07.336] Loaded PowerVR consumer services. [2025-09-23 22:48:07.352] Waiting data available... [2025-09-23 22:48:07.368] 512+0 records in [2025-09-23 22:48:07.368] 512+0 records out [2025-09-23 22:48:07.400] Starting syslogd/klogd: done [2025-09-23 22:48:07.416] DML Start [2025-09-23 22:48:07.559] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:48:07.735] DML res1: 0 [2025-09-23 22:48:08.247] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:48:08.263] Read Success [2025-09-23 22:48:08.263] Verifying certificate... [2025-09-23 22:48:08.551] Verified OK [2025-09-23 22:48:08.567] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:48:10.179] Verified OK [2025-09-23 22:48:10.179] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:48:10.784] Verified OK [2025-09-23 22:48:10.784] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:48:13.279] fs.protected_hardlinks = 1 [2025-09-23 22:48:13.295] fs.protected_symlinks = 1 [2025-09-23 22:48:13.311] kernel.modules_disabled = 1 [2025-09-23 22:48:13.503] [2025-09-23 22:48:13.503] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:48:14.885] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:48:22.640] SBL1:1210.0.1.0 [2025-09-23 22:48:22.687] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:48:24.254] SBL2:1210.0.1.0 [2025-09-23 22:48:24.302] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 22:48:24.398] j-A [2025-09-23 22:48:31.752] The R5 Autosar Classic is running [2025-09-23 22:48:31.777] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:48:31.777] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:48:32.384] INIT: version 2.96 booting [2025-09-23 22:48:32.496] INIT: Entering runlevel: 5 [2025-09-23 22:48:32.656] mtd32 attached [2025-09-23 22:48:32.672] mtd28 attached [2025-09-23 22:48:32.672] mtd24 attached [2025-09-23 22:48:32.720] ubi0:dml_code is mounted. [2025-09-23 22:48:32.736] RTNETLINK answers: File exists [2025-09-23 22:48:32.736] ubi2:textures is mounted. [2025-09-23 22:48:32.791] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:48:32.791] ubi1:animations is mounted. [2025-09-23 22:48:32.791] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:48:32.791] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:48:32.791] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:48:32.791] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:48:32.791] data.LB_FadeInType0=100 [2025-09-23 22:48:32.791] data.CHLH_FadeInType0=0 [2025-09-23 22:48:32.791] data.WU_FadeInDelay=0 [2025-09-23 22:48:32.791] max_time_out=0 [2025-09-23 22:48:32.791] No splash screen [2025-09-23 22:48:32.791] stop dss Done [2025-09-23 22:48:32.807] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:48:32.830] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:48:32.846] /dev/mem opened. [2025-09-23 22:48:32.846] Memory mapped at address 0xffff9cbb3000. [2025-09-23 22:48:32.872] Read at address 0x00600018 (0xffff9cbb3018): 0x00000000 [2025-09-23 22:48:32.872] Write at address 0x00600018 (0xffff9cbb3018): 0x00400040, readback 0x00400040 [2025-09-23 22:48:33.015] Loaded PowerVR consumer services. [2025-09-23 22:48:33.127] Waiting data available... [2025-09-23 22:48:33.143] 512+0 records in [2025-09-23 22:48:33.143] 512+0 records out [2025-09-23 22:48:33.192] Starting syslogd/klogd: done [2025-09-23 22:48:33.208] DML Start [2025-09-23 22:48:33.383] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:48:33.591] DML res1: 0 [2025-09-23 22:48:34.039] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:48:34.060] Read Success [2025-09-23 22:48:34.060] Verifying certificate... [2025-09-23 22:48:34.316] Verified OK [2025-09-23 22:48:34.332] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:48:35.883] Verified OK [2025-09-23 22:48:35.883] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:48:36.442] Verified OK [2025-09-23 22:48:36.442] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:48:39.193] fs.protected_hardlinks = 1 [2025-09-23 22:48:39.208] fs.protected_symlinks = 1 [2025-09-23 22:48:39.208] kernel.modules_disabled = 1 [2025-09-23 22:48:39.400] [2025-09-23 22:48:39.400] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:48:40.674] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:48:48.392] SBL1:1210.0.1.0 [2025-09-23 22:48:48.440] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:48:50.022] SBL2:1210.0.1.0 [2025-09-23 22:48:50.054] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:48:50.166] j-A [2025-09-23 22:48:57.504] The R5 Autosar Classic is running [2025-09-23 22:48:57.535] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:48:57.535] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:48:58.143] INIT: version 2.96 booting [2025-09-23 22:48:58.255] INIT: Entering runlevel: 5 [2025-09-23 22:48:58.415] mtd32 attached [2025-09-23 22:48:58.415] mtd24 attached [2025-09-23 22:48:58.431] mtd28 attached [2025-09-23 22:48:58.479] RTNETLINK answers: File exists [2025-09-23 22:48:58.521] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:48:58.521] ubi0:dml_code is mounted. [2025-09-23 22:48:58.521] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:48:58.521] ubi1:textures is mounted. [2025-09-23 22:48:58.521] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:48:58.521] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:48:58.521] ubi2:animations is mounted. [2025-09-23 22:48:58.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:48:58.537] data.LB_FadeInType0=100 [2025-09-23 22:48:58.568] data.CHLH_FadeInType0=0 [2025-09-23 22:48:58.568] data.WU_FadeInDelay=0 [2025-09-23 22:48:58.568] max_time_out=0 [2025-09-23 22:48:58.568] No splash screen [2025-09-23 22:48:58.568] stop dss Done [2025-09-23 22:48:58.568] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:48:58.583] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:48:58.633] /dev/mem opened. [2025-09-23 22:48:58.633] Memory mapped at address 0xffffa24de000. [2025-09-23 22:48:58.633] Read at address 0x00600018 (0xffffa24de018): 0x00000000 [2025-09-23 22:48:58.633] Write at address 0x00600018 (0xffffa24de018): 0x00400040, readback 0x00400040 [2025-09-23 22:48:58.745] Loaded PowerVR consumer services. [2025-09-23 22:48:58.873] Waiting data available... [2025-09-23 22:48:58.889] 512+0 records in [2025-09-23 22:48:58.889] 512+0 records out [2025-09-23 22:48:58.937] Starting syslogd/klogd: done [2025-09-23 22:48:58.953] DML Start [2025-09-23 22:48:59.113] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:48:59.288] DML res1: 0 [2025-09-23 22:48:59.843] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:48:59.843] Read Success [2025-09-23 22:48:59.843] Verifying certificate... [2025-09-23 22:49:00.082] Verified OK [2025-09-23 22:49:00.098] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:49:01.679] Verified OK [2025-09-23 22:49:01.679] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:49:02.296] Verified OK [2025-09-23 22:49:02.296] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:49:04.902] fs.protected_hardlinks = 1 [2025-09-23 22:49:04.902] fs.protected_symlinks = 1 [2025-09-23 22:49:04.917] kernel.modules_disabled = 1 [2025-09-23 22:49:05.093] [2025-09-23 22:49:05.093] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:49:06.384] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:49:14.142] SBL1:1210.0.1.0 [2025-09-23 22:49:14.174] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:49:15.757] SBL2:1210.0.1.0 [2025-09-23 22:49:15.789] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 22:49:15.901] j-A [2025-09-23 22:49:23.276] The R5 Autosar Classic is running [2025-09-23 22:49:23.276] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:49:23.276] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:49:23.883] INIT: version 2.96 booting [2025-09-23 22:49:23.995] INIT: Entering runlevel: 5 [2025-09-23 22:49:24.154] mtd24 attached [2025-09-23 22:49:24.154] mtd28 attached [2025-09-23 22:49:24.170] mtd32 attached [2025-09-23 22:49:24.186] ubi0:textures is mounted. [2025-09-23 22:49:24.218] ubi1:animations is mounted. [2025-09-23 22:49:24.285] RTNETLINK answers: File exists [2025-09-23 22:49:24.285] ubi2:dml_code is mounted. [2025-09-23 22:49:24.285] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:49:24.285] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:49:24.285] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:49:24.285] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:49:24.285] data.LB_FadeInType0=100 [2025-09-23 22:49:24.285] data.CHLH_FadeInType0=0 [2025-09-23 22:49:24.285] data.WU_FadeInDelay=0 [2025-09-23 22:49:24.285] max_time_out=0 [2025-09-23 22:49:24.285] No splash screen [2025-09-23 22:49:24.285] stop dss Done [2025-09-23 22:49:24.285] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:49:24.366] /dev/mem opened. [2025-09-23 22:49:24.366] Memory mapped at address 0xffffb7212000. [2025-09-23 22:49:24.366] Read at address 0x00600018 (0xffffb7212018): 0x00000000 [2025-09-23 22:49:24.366] Write at address 0x00600018 (0xffffb7212018): 0x00400040, readback 0x00400040 [2025-09-23 22:49:24.414] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:49:24.414] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:49:24.591] Loaded PowerVR consumer services. [2025-09-23 22:49:24.622] 512+0 records in [2025-09-23 22:49:24.622] 512+0 records out [2025-09-23 22:49:24.654] Starting syslogd/klogd: done [2025-09-23 22:49:24.686] Waiting data available... [2025-09-23 22:49:24.686] DML Start [2025-09-23 22:49:24.878] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:49:25.102] DML res1: 0 [2025-09-23 22:49:25.509] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:49:25.509] Read Success [2025-09-23 22:49:25.509] Verifying certificate... [2025-09-23 22:49:25.797] Verified OK [2025-09-23 22:49:25.813] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:49:27.370] Verified OK [2025-09-23 22:49:27.370] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:49:27.942] Verified OK [2025-09-23 22:49:27.942] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:49:30.691] fs.protected_hardlinks = 1 [2025-09-23 22:49:30.691] fs.protected_symlinks = 1 [2025-09-23 22:49:30.707] kernel.modules_disabled = 1 [2025-09-23 22:49:30.899] [2025-09-23 22:49:30.899] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:49:32.161] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:49:39.907] SBL1:1210.0.1.0 [2025-09-23 22:49:39.955] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:49:41.522] SBL2:1210.0.1.0 [2025-09-23 22:49:41.554] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:49:41.665] j-A [2025-09-23 22:49:49.021] The R5 Autosar Classic is running [2025-09-23 22:49:49.021] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:49:49.042] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:49:49.650] INIT: version 2.96 booting [2025-09-23 22:49:49.761] INIT: Entering runlevel: 5 [2025-09-23 22:49:49.905] mtd28 attached [2025-09-23 22:49:49.905] mtd24 attached [2025-09-23 22:49:49.937] mtd32 attached [2025-09-23 22:49:49.969] ubi0:animations is mounted. [2025-09-23 22:49:49.969] RTNETLINK answers: File exists [2025-09-23 22:49:50.036] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:49:50.036] ubi1:textures is mounted. [2025-09-23 22:49:50.036] ubi2:dml_code is mounted. [2025-09-23 22:49:50.036] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:49:50.036] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:49:50.036] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:49:50.036] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:49:50.036] data.LB_FadeInType0=100 [2025-09-23 22:49:50.036] data.CHLH_FadeInType0=0 [2025-09-23 22:49:50.036] data.WU_FadeInDelay=0 [2025-09-23 22:49:50.036] max_time_out=0 [2025-09-23 22:49:50.036] No splash screen [2025-09-23 22:49:50.036] stop dss Done [2025-09-23 22:49:50.105] /dev/mem opened. [2025-09-23 22:49:50.105] Memory mapped at address 0xffff91fda000. [2025-09-23 22:49:50.105] Read at address 0x00600018 (0xffff91fda018): 0x00000000 [2025-09-23 22:49:50.105] Write at address 0x00600018 (0xffff91fda018): 0x00400040, readback 0x00400040 [2025-09-23 22:49:50.105] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:49:50.121] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:49:50.313] Loaded PowerVR consumer services. [2025-09-23 22:49:50.392] Waiting data available... [2025-09-23 22:49:50.408] 512+0 records in [2025-09-23 22:49:50.408] 512+0 records out [2025-09-23 22:49:50.457] Starting syslogd/klogd: done [2025-09-23 22:49:50.473] DML Start [2025-09-23 22:49:50.649] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:49:50.856] DML res1: 0 [2025-09-23 22:49:51.304] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:49:51.328] Read Success [2025-09-23 22:49:51.328] Verifying certificate... [2025-09-23 22:49:51.584] Verified OK [2025-09-23 22:49:51.600] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:49:53.275] Verified OK [2025-09-23 22:49:53.275] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:49:53.867] Verified OK [2025-09-23 22:49:53.867] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:49:56.392] fs.protected_hardlinks = 1 [2025-09-23 22:49:56.408] fs.protected_symlinks = 1 [2025-09-23 22:49:56.408] kernel.modules_disabled = 1 [2025-09-23 22:49:56.616] [2025-09-23 22:49:56.616] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:49:57.919] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:50:05.652] SBL1:1210.0.1.0 [2025-09-23 22:50:05.699] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:50:07.266] SBL2:1210.0.1.0 [2025-09-23 22:50:07.314] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 22:50:07.410] j-A [2025-09-23 22:50:14.766] The R5 Autosar Classic is running [2025-09-23 22:50:14.789] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:50:14.789] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:50:15.396] INIT: version 2.96 booting [2025-09-23 22:50:15.508] INIT: Entering runlevel: 5 [2025-09-23 22:50:15.652] mtd24 attached [2025-09-23 22:50:15.668] mtd32 attached [2025-09-23 22:50:15.684] mtd28 attached [2025-09-23 22:50:15.716] ubi0:textures is mounted. [2025-09-23 22:50:15.767] RTNETLINK answers: File exists [2025-09-23 22:50:15.767] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:50:15.767] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:50:15.767] ubi1:dml_code is mounted. [2025-09-23 22:50:15.767] ubi2:animations is mounted. [2025-09-23 22:50:15.767] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:50:15.767] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:50:15.767] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:50:15.791] data.LB_FadeInType0=100 [2025-09-23 22:50:15.791] data.CHLH_FadeInType0=0 [2025-09-23 22:50:15.791] data.WU_FadeInDelay=0 [2025-09-23 22:50:15.791] max_time_out=0 [2025-09-23 22:50:15.791] No splash screen [2025-09-23 22:50:15.791] stop dss Done [2025-09-23 22:50:15.806] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:50:15.832] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:50:15.865] /dev/mem opened. [2025-09-23 22:50:15.865] Memory mapped at address 0xffff93d3a000. [2025-09-23 22:50:15.865] Read at address 0x00600018 (0xffff93d3a018): 0x00000000 [2025-09-23 22:50:15.865] Write at address 0x00600018 (0xffff93d3a018): 0x00400040, readback 0x00400040 [2025-09-23 22:50:16.010] Loaded PowerVR consumer services. [2025-09-23 22:50:16.137] Waiting data available... [2025-09-23 22:50:16.153] 512+0 records in [2025-09-23 22:50:16.153] 512+0 records out [2025-09-23 22:50:16.185] Starting syslogd/klogd: done [2025-09-23 22:50:16.201] DML Start [2025-09-23 22:50:16.378] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:50:16.618] DML res1: 0 [2025-09-23 22:50:17.049] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:50:17.049] Read Success [2025-09-23 22:50:17.065] Verifying certificate... [2025-09-23 22:50:17.305] Verified OK [2025-09-23 22:50:17.321] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:50:18.983] Verified OK [2025-09-23 22:50:18.983] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:50:19.603] Verified OK [2025-09-23 22:50:19.603] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:50:22.193] fs.protected_hardlinks = 1 [2025-09-23 22:50:22.193] fs.protected_symlinks = 1 [2025-09-23 22:50:22.209] kernel.modules_disabled = 1 [2025-09-23 22:50:22.401] [2025-09-23 22:50:22.401] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:50:23.643] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:50:31.412] SBL1:1210.0.1.0 [2025-09-23 22:50:31.460] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:50:33.026] SBL2:1210.0.1.0 [2025-09-23 22:50:33.074] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:50:33.171] j-A [2025-09-23 22:50:40.526] The R5 Autosar Classic is running [2025-09-23 22:50:40.550] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:50:40.550] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:50:41.157] INIT: version 2.96 booting [2025-09-23 22:50:41.269] INIT: Entering runlevel: 5 [2025-09-23 22:50:41.430] mtd28 attached [2025-09-23 22:50:41.430] mtd24 attached [2025-09-23 22:50:41.445] mtd32 attached [2025-09-23 22:50:41.493] ubi0:animations is mounted. [2025-09-23 22:50:41.493] RTNETLINK answers: File exists [2025-09-23 22:50:41.550] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:50:41.550] ubi1:textures is mounted. [2025-09-23 22:50:41.550] ubi2:dml_code is mounted. [2025-09-23 22:50:41.550] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:50:41.550] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:50:41.550] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:50:41.550] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:50:41.550] data.LB_FadeInType0=100 [2025-09-23 22:50:41.550] data.CHLH_FadeInType0=0 [2025-09-23 22:50:41.550] data.WU_FadeInDelay=0 [2025-09-23 22:50:41.550] max_time_out=0 [2025-09-23 22:50:41.550] No splash screen [2025-09-23 22:50:41.550] stop dss Done [2025-09-23 22:50:41.618] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:50:41.618] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:50:41.618] /dev/mem opened. [2025-09-23 22:50:41.618] Memory mapped at address 0xffff8f557000. [2025-09-23 22:50:41.618] Read at address 0x00600018 (0xffff8f557018): 0x00000000 [2025-09-23 22:50:41.618] Write at address 0x00600018 (0xffff8f557018): 0x00400040, readback 0x00400040 [2025-09-23 22:50:41.729] Loaded PowerVR consumer services. [2025-09-23 22:50:41.873] Waiting data available... [2025-09-23 22:50:41.905] 512+0 records in [2025-09-23 22:50:41.905] 512+0 records out [2025-09-23 22:50:41.921] Starting syslogd/klogd: done [2025-09-23 22:50:41.937] DML Start [2025-09-23 22:50:42.161] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:50:42.416] DML res1: 0 [2025-09-23 22:50:42.725] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:50:42.725] Read Success [2025-09-23 22:50:42.725] Verifying certificate... [2025-09-23 22:50:42.949] Verified OK [2025-09-23 22:50:42.965] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:50:44.657] Verified OK [2025-09-23 22:50:44.657] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:50:45.280] Verified OK [2025-09-23 22:50:45.280] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:50:47.917] fs.protected_hardlinks = 1 [2025-09-23 22:50:47.917] fs.protected_symlinks = 1 [2025-09-23 22:50:47.917] kernel.modules_disabled = 1 [2025-09-23 22:50:48.093] [2025-09-23 22:50:48.093] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:50:49.460] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:50:57.178] SBL1:1210.0.1.0 [2025-09-23 22:50:57.210] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:50:58.792] SBL2:1210.0.1.0 [2025-09-23 22:50:58.824] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:50:58.936] j-A [2025-09-23 22:51:06.307] The R5 Autosar Classic is running [2025-09-23 22:51:06.307] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:51:06.307] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:51:06.915] INIT: version 2.96 booting [2025-09-23 22:51:07.011] INIT: Entering runlevel: 5 [2025-09-23 22:51:07.170] mtd32 attached [2025-09-23 22:51:07.186] mtd24 attached [2025-09-23 22:51:07.186] mtd28 attached [2025-09-23 22:51:07.219] ubi0:dml_code is mounted. [2025-09-23 22:51:07.235] RTNETLINK answers: File exists [2025-09-23 22:51:07.301] ubi1:textures is mounted. [2025-09-23 22:51:07.301] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:51:07.301] ubi2:animations is mounted. [2025-09-23 22:51:07.301] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:51:07.301] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:51:07.301] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:51:07.301] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:51:07.301] data.LB_FadeInType0=100 [2025-09-23 22:51:07.301] data.CHLH_FadeInType0=0 [2025-09-23 22:51:07.301] data.WU_FadeInDelay=0 [2025-09-23 22:51:07.301] max_time_out=0 [2025-09-23 22:51:07.301] No splash screen [2025-09-23 22:51:07.301] stop dss Done [2025-09-23 22:51:07.370] /dev/mem opened. [2025-09-23 22:51:07.370] Memory mapped at address 0xffff914e5000. [2025-09-23 22:51:07.370] Read at address 0x00600018 (0xffff914e5018): 0x00000000 [2025-09-23 22:51:07.370] Write at address 0x00600018 (0xffff914e5018): 0x00400040, readback 0x00400040 [2025-09-23 22:51:07.386] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:51:07.402] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:51:07.611] Waiting data available... [2025-09-23 22:51:07.626] Loaded PowerVR consumer services. [2025-09-23 22:51:07.642] 512+0 records in [2025-09-23 22:51:07.658] 512+0 records out [2025-09-23 22:51:07.690] Starting syslogd/klogd: done [2025-09-23 22:51:07.706] DML Start [2025-09-23 22:51:07.883] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:51:08.154] DML res1: 0 [2025-09-23 22:51:08.535] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:51:08.535] Read Success [2025-09-23 22:51:08.535] Verifying certificate... [2025-09-23 22:51:08.759] Verified OK [2025-09-23 22:51:08.775] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:51:10.460] Verified OK [2025-09-23 22:51:10.460] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:51:11.078] Verified OK [2025-09-23 22:51:11.078] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:51:13.828] fs.protected_hardlinks = 1 [2025-09-23 22:51:13.828] fs.protected_symlinks = 1 [2025-09-23 22:51:13.828] kernel.modules_disabled = 1 [2025-09-23 22:51:14.019] [2025-09-23 22:51:14.019] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:51:15.214] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:51:22.925] SBL1:1210.0.1.0 [2025-09-23 22:51:22.973] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:51:24.541] SBL2:1210.0.1.0 [2025-09-23 22:51:24.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:51:24.684] j-A [2025-09-23 22:51:32.038] The R5 Autosar Classic is running [2025-09-23 22:51:32.063] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:51:32.063] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:51:32.671] INIT: version 2.96 booting [2025-09-23 22:51:32.783] INIT: Entering runlevel: 5 [2025-09-23 22:51:32.943] mtd32 attached [2025-09-23 22:51:32.959] mtd28 attached [2025-09-23 22:51:32.959] mtd24 attached [2025-09-23 22:51:32.991] ubi0:dml_code is mounted. [2025-09-23 22:51:33.007] RTNETLINK answers: File exists [2025-09-23 22:51:33.067] ubi1:animations is mounted. [2025-09-23 22:51:33.067] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:51:33.067] ubi2:textures is mounted. [2025-09-23 22:51:33.067] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:51:33.067] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:51:33.067] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:51:33.067] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:51:33.067] data.LB_FadeInType0=100 [2025-09-23 22:51:33.067] data.CHLH_FadeInType0=0 [2025-09-23 22:51:33.067] data.WU_FadeInDelay=0 [2025-09-23 22:51:33.067] max_time_out=0 [2025-09-23 22:51:33.067] No splash screen [2025-09-23 22:51:33.067] stop dss Done [2025-09-23 22:51:33.143] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:51:33.143] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:51:33.143] /dev/mem opened. [2025-09-23 22:51:33.143] Memory mapped at address 0xffffae135000. [2025-09-23 22:51:33.143] Read at address 0x00600018 (0xffffae135018): 0x00000000 [2025-09-23 22:51:33.143] Write at address 0x00600018 (0xffffae135018): 0x00400040, readback 0x00400040 [2025-09-23 22:51:33.334] Loaded PowerVR consumer services. [2025-09-23 22:51:33.415] Waiting data available... [2025-09-23 22:51:33.431] 512+0 records in [2025-09-23 22:51:33.431] 512+0 records out [2025-09-23 22:51:33.463] Starting syslogd/klogd: done [2025-09-23 22:51:33.479] DML Start [2025-09-23 22:51:33.671] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:51:33.927] DML res1: 0 [2025-09-23 22:51:34.317] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:51:34.317] Read Success [2025-09-23 22:51:34.317] Verifying certificate... [2025-09-23 22:51:34.556] Verified OK [2025-09-23 22:51:34.588] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:51:36.187] Verified OK [2025-09-23 22:51:36.187] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:51:36.849] Verified OK [2025-09-23 22:51:36.849] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:51:39.504] fs.protected_hardlinks = 1 [2025-09-23 22:51:39.520] fs.protected_symlinks = 1 [2025-09-23 22:51:39.535] kernel.modules_disabled = 1 [2025-09-23 22:51:39.727] [2025-09-23 22:51:39.727] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:51:40.974] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:51:48.666] SBL1:1210.0.1.0 [2025-09-23 22:51:48.714] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:51:50.281] SBL2:1210.0.1.0 [2025-09-23 22:51:50.329] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:51:50.425] j-A [2025-09-23 22:51:57.779] The R5 Autosar Classic is running [2025-09-23 22:51:57.804] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:51:57.804] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:51:58.412] INIT: version 2.96 booting [2025-09-23 22:51:58.524] INIT: Entering runlevel: 5 [2025-09-23 22:51:58.683] mtd24 attached [2025-09-23 22:51:58.699] mtd28 attached [2025-09-23 22:51:58.715] mtd32 attached [2025-09-23 22:51:58.731] ubi1:animations is mounted. [2025-09-23 22:51:58.747] ubi0:textures is mounted. [2025-09-23 22:51:58.747] RTNETLINK answers: File exists [2025-09-23 22:51:58.787] ubi2:dml_code is mounted. [2025-09-23 22:51:58.787] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:51:58.787] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:51:58.787] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:51:58.820] data.LB_FadeInType0=100 [2025-09-23 22:51:58.820] data.CHLH_FadeInType0=0 [2025-09-23 22:51:58.820] data.WU_FadeInDelay=0 [2025-09-23 22:51:58.820] max_time_out=0 [2025-09-23 22:51:58.820] No splash screen [2025-09-23 22:51:58.820] stop dss Done [2025-09-23 22:51:58.820] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:51:58.820] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:51:58.852] /dev/mem opened. [2025-09-23 22:51:58.852] Memory mapped at address 0xffff98352000. [2025-09-23 22:51:58.878] Read at address 0x00600018 (0xffff98352018): 0x00000000 [2025-09-23 22:51:58.878] Write at address 0x00600018 (0xffff98352018): 0x00400040, readback 0x00400040 [2025-09-23 22:51:58.941] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:51:58.941] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:51:59.021] Loaded PowerVR consumer services. [2025-09-23 22:51:59.164] 512+0 records in [2025-09-23 22:51:59.164] 512+0 records out [2025-09-23 22:51:59.164] Waiting data available... [2025-09-23 22:51:59.211] Starting syslogd/klogd: done [2025-09-23 22:51:59.227] DML Start [2025-09-23 22:51:59.403] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:51:59.612] DML res1: 0 [2025-09-23 22:52:00.091] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:52:00.107] Read Success [2025-09-23 22:52:00.107] Verifying certificate... [2025-09-23 22:52:00.347] Verified OK [2025-09-23 22:52:00.347] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:52:02.064] Verified OK [2025-09-23 22:52:02.064] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:52:02.647] Verified OK [2025-09-23 22:52:02.647] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:52:05.158] fs.protected_hardlinks = 1 [2025-09-23 22:52:05.158] fs.protected_symlinks = 1 [2025-09-23 22:52:05.174] kernel.modules_disabled = 1 [2025-09-23 22:52:05.365] [2025-09-23 22:52:05.365] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:52:06.660] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:52:14.416] SBL1:1210.0.1.0 [2025-09-23 22:52:14.464] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:52:16.047] SBL2:1210.0.1.0 [2025-09-23 22:52:16.079] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:52:16.190] j-A [2025-09-23 22:52:23.560] The R5 Autosar Classic is running [2025-09-23 22:52:23.560] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:52:23.560] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:52:24.167] INIT: version 2.96 booting [2025-09-23 22:52:24.279] INIT: Entering runlevel: 5 [2025-09-23 22:52:24.439] mtd32 attached [2025-09-23 22:52:24.439] mtd24 attached [2025-09-23 22:52:24.455] mtd28 attached [2025-09-23 22:52:24.503] RTNETLINK answers: File exists [2025-09-23 22:52:24.569] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:52:24.569] ubi2:animations is mounted. [2025-09-23 22:52:24.569] ubi1:textures is mounted. [2025-09-23 22:52:24.569] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:52:24.569] ubi0:dml_code is mounted. [2025-09-23 22:52:24.569] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:52:24.569] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:52:24.569] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:52:24.569] data.LB_FadeInType0=100 [2025-09-23 22:52:24.569] data.CHLH_FadeInType0=0 [2025-09-23 22:52:24.569] data.WU_FadeInDelay=0 [2025-09-23 22:52:24.569] max_time_out=0 [2025-09-23 22:52:24.569] No splash screen [2025-09-23 22:52:24.569] stop dss Done [2025-09-23 22:52:24.616] /dev/mem opened. [2025-09-23 22:52:24.616] Memory mapped at address 0xffff8cbaa000. [2025-09-23 22:52:24.667] Read at address 0x00600018 (0xffff8cbaa018): 0x00000000 [2025-09-23 22:52:24.667] Write at address 0x00600018 (0xffff8cbaa018): 0x00400040, readback 0x00400040 [2025-09-23 22:52:24.667] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:52:24.667] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:52:24.779] Loaded PowerVR consumer services. [2025-09-23 22:52:24.917] Waiting data available... [2025-09-23 22:52:24.917] 512+0 records in [2025-09-23 22:52:24.917] 512+0 records out [2025-09-23 22:52:24.949] Starting syslogd/klogd: done [2025-09-23 22:52:24.965] DML Start [2025-09-23 22:52:25.140] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:52:25.364] DML res1: 0 [2025-09-23 22:52:25.805] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:52:25.805] Read Success [2025-09-23 22:52:25.805] Verifying certificate... [2025-09-23 22:52:26.029] Verified OK [2025-09-23 22:52:26.044] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:52:27.523] Verified OK [2025-09-23 22:52:27.523] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:52:28.189] Verified OK [2025-09-23 22:52:28.189] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:52:31.003] fs.protected_hardlinks = 1 [2025-09-23 22:52:31.003] fs.protected_symlinks = 1 [2025-09-23 22:52:31.019] kernel.modules_disabled = 1 [2025-09-23 22:52:31.211] [2025-09-23 22:52:31.211] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:52:32.458] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:52:40.196] SBL1:1210.0.1.0 [2025-09-23 22:52:40.228] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:52:41.810] SBL2:1210.0.1.0 [2025-09-23 22:52:41.842] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 22:52:41.955] j-A [2025-09-23 22:52:49.309] The R5 Autosar Classic is running [2025-09-23 22:52:49.309] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:52:49.329] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:52:49.937] INIT: version 2.96 booting [2025-09-23 22:52:50.033] INIT: Entering runlevel: 5 [2025-09-23 22:52:50.192] mtd28 attached [2025-09-23 22:52:50.208] mtd32 attached [2025-09-23 22:52:50.224] mtd24 attached [2025-09-23 22:52:50.256] ubi0:animations is mounted. [2025-09-23 22:52:50.272] RTNETLINK answers: File exists [2025-09-23 22:52:50.272] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:52:50.325] ubi2:textures is mounted. [2025-09-23 22:52:50.325] ubi1:dml_code is mounted. [2025-09-23 22:52:50.325] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:52:50.325] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:52:50.325] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:52:50.325] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:52:50.325] data.LB_FadeInType0=100 [2025-09-23 22:52:50.325] data.CHLH_FadeInType0=0 [2025-09-23 22:52:50.325] data.WU_FadeInDelay=0 [2025-09-23 22:52:50.325] max_time_out=0 [2025-09-23 22:52:50.325] No splash screen [2025-09-23 22:52:50.325] stop dss Done [2025-09-23 22:52:50.394] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:52:50.394] /dev/mem opened. [2025-09-23 22:52:50.394] Memory mapped at address 0xffffa6e3b000. [2025-09-23 22:52:50.394] Read at address 0x00600018 (0xffffa6e3b018): 0x00000000 [2025-09-23 22:52:50.394] Write at address 0x00600018 (0xffffa6e3b018): 0x00400040, readback 0x00400040 [2025-09-23 22:52:50.394] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:52:50.505] Loaded PowerVR consumer services. [2025-09-23 22:52:50.666] Waiting data available... [2025-09-23 22:52:50.682] 512+0 records in [2025-09-23 22:52:50.682] 512+0 records out [2025-09-23 22:52:50.729] Starting syslogd/klogd: done [2025-09-23 22:52:50.745] DML Start [2025-09-23 22:52:50.936] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:52:51.177] DML res1: 0 [2025-09-23 22:52:51.575] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:52:51.575] Read Success [2025-09-23 22:52:51.575] Verifying certificate... [2025-09-23 22:52:51.815] Verified OK [2025-09-23 22:52:51.831] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:52:53.574] Verified OK [2025-09-23 22:52:53.595] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:52:54.187] Verified OK [2025-09-23 22:52:54.208] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:52:56.782] fs.protected_hardlinks = 1 [2025-09-23 22:52:56.797] fs.protected_symlinks = 1 [2025-09-23 22:52:56.797] kernel.modules_disabled = 1 [2025-09-23 22:52:56.990] [2025-09-23 22:52:56.990] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:52:58.253] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:53:05.938] SBL1:1210.0.1.0 [2025-09-23 22:53:05.986] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:53:07.553] SBL2:1210.0.1.0 [2025-09-23 22:53:07.600] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:53:07.696] j-A [2025-09-23 22:53:15.051] The R5 Autosar Classic is running [2025-09-23 22:53:15.074] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:53:15.074] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:53:15.681] INIT: version 2.96 booting [2025-09-23 22:53:15.793] INIT: Entering runlevel: 5 [2025-09-23 22:53:15.953] mtd24 attached [2025-09-23 22:53:15.953] mtd28 attached [2025-09-23 22:53:15.969] mtd32 attached [2025-09-23 22:53:16.017] ubi0:textures is mounted. [2025-09-23 22:53:16.017] RTNETLINK answers: File exists [2025-09-23 22:53:16.053] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:53:16.053] ubi1:animations is mounted. [2025-09-23 22:53:16.053] ubi2:dml_code is mounted. [2025-09-23 22:53:16.053] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:53:16.053] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:53:16.053] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:53:16.090] data.LB_FadeInType0=100 [2025-09-23 22:53:16.090] data.CHLH_FadeInType0=0 [2025-09-23 22:53:16.090] data.WU_FadeInDelay=0 [2025-09-23 22:53:16.090] max_time_out=0 [2025-09-23 22:53:16.090] No splash screen [2025-09-23 22:53:16.090] stop dss Done [2025-09-23 22:53:16.090] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:53:16.148] /dev/mem opened. [2025-09-23 22:53:16.148] Memory mapped at address 0xffffbed69000. [2025-09-23 22:53:16.148] Read at address 0x00600018 (0xffffbed69018): 0x00000000 [2025-09-23 22:53:16.148] Write at address 0x00600018 (0xffffbed69018): 0x00400040, readback 0x00400040 [2025-09-23 22:53:16.209] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:53:16.209] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:53:16.353] Loaded PowerVR consumer services. [2025-09-23 22:53:16.432] Waiting data available... [2025-09-23 22:53:16.465] 512+0 records in [2025-09-23 22:53:16.465] 512+0 records out [2025-09-23 22:53:16.481] Starting syslogd/klogd: done [2025-09-23 22:53:16.497] DML Start [2025-09-23 22:53:16.673] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:53:16.912] DML res1: 0 [2025-09-23 22:53:17.388] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:53:17.388] Read Success [2025-09-23 22:53:17.388] Verifying certificate... [2025-09-23 22:53:17.676] Verified OK [2025-09-23 22:53:17.692] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:53:19.428] Verified OK [2025-09-23 22:53:19.428] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:53:20.056] Verified OK [2025-09-23 22:53:20.056] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:53:22.566] fs.protected_hardlinks = 1 [2025-09-23 22:53:22.566] fs.protected_symlinks = 1 [2025-09-23 22:53:22.583] kernel.modules_disabled = 1 [2025-09-23 22:53:22.775] [2025-09-23 22:53:22.775] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:53:23.984] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:53:31.703] SBL1:1210.0.1.0 [2025-09-23 22:53:31.751] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:53:33.318] SBL2:1210.0.1.0 [2025-09-23 22:53:33.350] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:53:33.462] j-A [2025-09-23 22:53:40.817] The R5 Autosar Classic is running [2025-09-23 22:53:40.817] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:53:40.838] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:53:41.445] INIT: version 2.96 booting [2025-09-23 22:53:41.557] INIT: Entering runlevel: 5 [2025-09-23 22:53:41.717] mtd32 attached [2025-09-23 22:53:41.717] mtd24 attached [2025-09-23 22:53:41.733] mtd28 attached [2025-09-23 22:53:41.781] RTNETLINK answers: File exists [2025-09-23 22:53:41.824] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:53:41.824] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:53:41.824] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:53:41.824] ubi2:animations is mounted. [2025-09-23 22:53:41.824] ubi1:textures is mounted. [2025-09-23 22:53:41.824] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:53:41.824] ubi0:dml_code is mounted. [2025-09-23 22:53:41.824] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:53:41.840] data.LB_FadeInType0=100 [2025-09-23 22:53:41.840] data.CHLH_FadeInType0=0 [2025-09-23 22:53:41.861] data.WU_FadeInDelay=0 [2025-09-23 22:53:41.861] max_time_out=0 [2025-09-23 22:53:41.861] No splash screen [2025-09-23 22:53:41.861] stop dss Done [2025-09-23 22:53:41.877] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:53:41.893] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:53:41.942] /dev/mem opened. [2025-09-23 22:53:41.942] Memory mapped at address 0xffff9b60d000. [2025-09-23 22:53:41.942] Read at address 0x00600018 (0xffff9b60d018): 0x00000000 [2025-09-23 22:53:41.942] Write at address 0x00600018 (0xffff9b60d018): 0x00400040, readback 0x00400040 [2025-09-23 22:53:42.134] Loaded PowerVR consumer services. [2025-09-23 22:53:42.166] Waiting data available... [2025-09-23 22:53:42.182] 512+0 records in [2025-09-23 22:53:42.182] 512+0 records out [2025-09-23 22:53:42.214] Starting syslogd/klogd: done [2025-09-23 22:53:42.230] DML Start [2025-09-23 22:53:42.390] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:53:42.597] DML res1: 0 [2025-09-23 22:53:43.137] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:53:43.137] Read Success [2025-09-23 22:53:43.137] Verifying certificate... [2025-09-23 22:53:43.361] Verified OK [2025-09-23 22:53:43.377] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:53:45.040] Verified OK [2025-09-23 22:53:45.055] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:53:45.710] Verified OK [2025-09-23 22:53:45.710] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:53:48.300] fs.protected_hardlinks = 1 [2025-09-23 22:53:48.316] fs.protected_symlinks = 1 [2025-09-23 22:53:48.316] kernel.modules_disabled = 1 [2025-09-23 22:53:48.524] [2025-09-23 22:53:48.524] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:53:49.664] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:53:57.458] SBL1:1210.0.1.0 [2025-09-23 22:53:57.506] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:53:59.073] SBL2:1210.0.1.0 [2025-09-23 22:53:59.121] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:53:59.232] j-A [2025-09-23 22:54:06.572] The R5 Autosar Classic is running [2025-09-23 22:54:06.597] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:54:06.597] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:54:07.205] INIT: version 2.96 booting [2025-09-23 22:54:07.316] INIT: Entering runlevel: 5 [2025-09-23 22:54:07.461] mtd24 attached [2025-09-23 22:54:07.477] mtd32 attached [2025-09-23 22:54:07.493] mtd28 attached [2025-09-23 22:54:07.541] RTNETLINK answers: File exists [2025-09-23 22:54:07.605] ubi1:dml_code is mounted. [2025-09-23 22:54:07.605] ubi0:textures is mounted. [2025-09-23 22:54:07.605] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:54:07.605] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:54:07.605] ubi2:animations is mounted. [2025-09-23 22:54:07.605] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:54:07.605] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:54:07.605] data.LB_FadeInType0=100 [2025-09-23 22:54:07.605] data.CHLH_FadeInType0=0 [2025-09-23 22:54:07.605] data.WU_FadeInDelay=0 [2025-09-23 22:54:07.605] max_time_out=0 [2025-09-23 22:54:07.605] No splash screen [2025-09-23 22:54:07.605] stop dss Done [2025-09-23 22:54:07.605] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:54:07.637] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:54:07.637] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:54:07.675] /dev/mem opened. [2025-09-23 22:54:07.675] Memory mapped at address 0xffff9b316000. [2025-09-23 22:54:07.675] Read at address 0x00600018 (0xffff9b316018): 0x00000000 [2025-09-23 22:54:07.675] Write at address 0x00600018 (0xffff9b316018): 0x00400040, readback 0x00400040 [2025-09-23 22:54:07.803] Loaded PowerVR consumer services. [2025-09-23 22:54:07.931] Waiting data available... [2025-09-23 22:54:07.963] 512+0 records in [2025-09-23 22:54:07.963] 512+0 records out [2025-09-23 22:54:07.995] Starting syslogd/klogd: done [2025-09-23 22:54:08.011] DML Start [2025-09-23 22:54:08.171] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:54:08.346] DML res1: 0 [2025-09-23 22:54:08.874] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:54:08.895] Read Success [2025-09-23 22:54:08.895] Verifying certificate... [2025-09-23 22:54:09.136] Verified OK [2025-09-23 22:54:09.168] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:54:10.794] Verified OK [2025-09-23 22:54:10.794] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:54:11.337] Verified OK [2025-09-23 22:54:11.337] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:54:13.752] fs.protected_hardlinks = 1 [2025-09-23 22:54:13.752] fs.protected_symlinks = 1 [2025-09-23 22:54:13.768] kernel.modules_disabled = 1 [2025-09-23 22:54:13.959] [2025-09-23 22:54:13.959] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:54:15.507] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:54:23.227] SBL1:1210.0.1.0 [2025-09-23 22:54:23.275] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:54:24.857] SBL2:1210.0.1.0 [2025-09-23 22:54:24.889] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:54:25.002] j-A [2025-09-23 22:54:32.341] The R5 Autosar Classic is running [2025-09-23 22:54:32.372] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:54:32.372] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:54:32.980] INIT: version 2.96 booting [2025-09-23 22:54:33.091] INIT: Entering runlevel: 5 [2025-09-23 22:54:33.252] mtd28 attached [2025-09-23 22:54:33.252] mtd24 attached [2025-09-23 22:54:33.268] mtd32 attached [2025-09-23 22:54:33.316] ubi0:animations is mounted. [2025-09-23 22:54:33.316] ubi1:textures is mounted. [2025-09-23 22:54:33.374] RTNETLINK answers: File exists [2025-09-23 22:54:33.374] ubi2:dml_code is mounted. [2025-09-23 22:54:33.374] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:54:33.374] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:54:33.374] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:54:33.374] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:54:33.374] data.LB_FadeInType0=100 [2025-09-23 22:54:33.374] data.CHLH_FadeInType0=0 [2025-09-23 22:54:33.374] data.WU_FadeInDelay=0 [2025-09-23 22:54:33.374] max_time_out=0 [2025-09-23 22:54:33.374] No splash screen [2025-09-23 22:54:33.374] stop dss Done [2025-09-23 22:54:33.374] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:54:33.455] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:54:33.455] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:54:33.455] /dev/mem opened. [2025-09-23 22:54:33.455] Memory mapped at address 0xffff8fbba000. [2025-09-23 22:54:33.455] Read at address 0x00600018 (0xffff8fbba018): 0x00000000 [2025-09-23 22:54:33.455] Write at address 0x00600018 (0xffff8fbba018): 0x00400040, readback 0x00400040 [2025-09-23 22:54:33.696] Loaded PowerVR consumer services. [2025-09-23 22:54:33.759] Waiting data available... [2025-09-23 22:54:33.759] 512+0 records in [2025-09-23 22:54:33.759] 512+0 records out [2025-09-23 22:54:33.775] Starting syslogd/klogd: done [2025-09-23 22:54:33.791] DML Start [2025-09-23 22:54:33.950] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:54:34.174] DML res1: 0 [2025-09-23 22:54:34.638] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:54:34.654] Read Success [2025-09-23 22:54:34.654] Verifying certificate... [2025-09-23 22:54:34.925] Verified OK [2025-09-23 22:54:34.925] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:54:36.525] Verified OK [2025-09-23 22:54:36.525] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:54:37.100] Verified OK [2025-09-23 22:54:37.116] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:54:39.866] fs.protected_hardlinks = 1 [2025-09-23 22:54:39.866] fs.protected_symlinks = 1 [2025-09-23 22:54:39.882] kernel.modules_disabled = 1 [2025-09-23 22:54:40.073] [2025-09-23 22:54:40.073] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:54:41.218] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:54:48.996] SBL1:1210.0.1.0 [2025-09-23 22:54:49.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:54:50.612] SBL2:1210.0.1.0 [2025-09-23 22:54:50.660] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:54:50.771] j-A [2025-09-23 22:54:58.110] The R5 Autosar Classic is running [2025-09-23 22:54:58.135] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:54:58.135] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:54:58.744] INIT: version 2.96 booting [2025-09-23 22:54:58.872] INIT: Entering runlevel: 5 [2025-09-23 22:54:59.031] mtd24 attached [2025-09-23 22:54:59.031] mtd28 attached [2025-09-23 22:54:59.047] mtd32 attached [2025-09-23 22:54:59.080] ubi0:textures is mounted. [2025-09-23 22:54:59.096] RTNETLINK answers: File exists [2025-09-23 22:54:59.154] ubi1:animations is mounted. [2025-09-23 22:54:59.154] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:54:59.154] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:54:59.154] ubi2:dml_code is mounted. [2025-09-23 22:54:59.154] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:54:59.154] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:54:59.154] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:54:59.154] data.LB_FadeInType0=100 [2025-09-23 22:54:59.154] data.CHLH_FadeInType0=0 [2025-09-23 22:54:59.154] data.WU_FadeInDelay=0 [2025-09-23 22:54:59.154] max_time_out=0 [2025-09-23 22:54:59.154] No splash screen [2025-09-23 22:54:59.154] stop dss Done [2025-09-23 22:54:59.185] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:54:59.238] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:54:59.238] /dev/mem opened. [2025-09-23 22:54:59.238] Memory mapped at address 0xffff92a33000. [2025-09-23 22:54:59.238] Read at address 0x00600018 (0xffff92a33018): 0x00000000 [2025-09-23 22:54:59.238] Write at address 0x00600018 (0xffff92a33018): 0x00400040, readback 0x00400040 [2025-09-23 22:54:59.318] Loaded PowerVR consumer services. [2025-09-23 22:54:59.478] Waiting data available... [2025-09-23 22:54:59.503] 512+0 records in [2025-09-23 22:54:59.503] 512+0 records out [2025-09-23 22:54:59.535] Starting syslogd/klogd: done [2025-09-23 22:54:59.567] DML Start [2025-09-23 22:54:59.727] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:54:59.936] DML res1: 0 [2025-09-23 22:55:00.399] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:55:00.420] Read Success [2025-09-23 22:55:00.420] Verifying certificate... [2025-09-23 22:55:00.676] Verified OK [2025-09-23 22:55:00.692] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:55:02.355] Verified OK [2025-09-23 22:55:02.370] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:55:03.021] Verified OK [2025-09-23 22:55:03.021] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:55:05.612] fs.protected_hardlinks = 1 [2025-09-23 22:55:05.627] fs.protected_symlinks = 1 [2025-09-23 22:55:05.627] kernel.modules_disabled = 1 [2025-09-23 22:55:05.819] [2025-09-23 22:55:05.819] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:55:07.006] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:55:14.799] SBL1:1210.0.1.0 [2025-09-23 22:55:14.847] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:55:16.415] SBL2:1210.0.1.0 [2025-09-23 22:55:16.462] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:55:16.558] j-A [2025-09-23 22:55:23.913] The R5 Autosar Classic is running [2025-09-23 22:55:23.937] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:55:23.937] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:55:24.545] INIT: version 2.96 booting [2025-09-23 22:55:24.657] INIT: Entering runlevel: 5 [2025-09-23 22:55:24.817] mtd32 attached [2025-09-23 22:55:24.817] mtd24 attached [2025-09-23 22:55:24.833] mtd28 attached [2025-09-23 22:55:24.880] RTNETLINK answers: File exists [2025-09-23 22:55:24.880] ubi0:dml_code is mounted. [2025-09-23 22:55:24.943] ubi1:textures is mounted. [2025-09-23 22:55:24.943] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:55:24.943] ubi2:animations is mounted. [2025-09-23 22:55:24.943] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:55:24.943] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:55:24.943] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:55:24.943] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:55:24.943] data.LB_FadeInType0=100 [2025-09-23 22:55:24.943] data.CHLH_FadeInType0=0 [2025-09-23 22:55:24.943] data.WU_FadeInDelay=0 [2025-09-23 22:55:24.943] max_time_out=0 [2025-09-23 22:55:24.943] No splash screen [2025-09-23 22:55:24.943] stop dss Done [2025-09-23 22:55:24.988] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:55:24.988] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:55:25.025] /dev/mem opened. [2025-09-23 22:55:25.025] Memory mapped at address 0xffffaa39d000. [2025-09-23 22:55:25.025] Read at address 0x00600018 (0xffffaa39d018): 0x00000000 [2025-09-23 22:55:25.025] Write at address 0x00600018 (0xffffaa39d018): 0x00400040, readback 0x00400040 [2025-09-23 22:55:25.184] Loaded PowerVR consumer services. [2025-09-23 22:55:25.281] Waiting data available... [2025-09-23 22:55:25.297] 512+0 records in [2025-09-23 22:55:25.297] 512+0 records out [2025-09-23 22:55:25.345] Starting syslogd/klogd: done [2025-09-23 22:55:25.361] DML Start [2025-09-23 22:55:25.568] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:55:25.776] DML res1: 0 [2025-09-23 22:55:26.222] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:55:26.222] Read Success [2025-09-23 22:55:26.222] Verifying certificate... [2025-09-23 22:55:26.494] Verified OK [2025-09-23 22:55:26.494] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:55:28.157] Verified OK [2025-09-23 22:55:28.157] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:55:28.731] Verified OK [2025-09-23 22:55:28.731] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:55:31.289] fs.protected_hardlinks = 1 [2025-09-23 22:55:31.305] fs.protected_symlinks = 1 [2025-09-23 22:55:31.305] kernel.modules_disabled = 1 [2025-09-23 22:55:31.497] [2025-09-23 22:55:31.497] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:55:32.834] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:55:40.538] SBL1:1210.0.1.0 [2025-09-23 22:55:40.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:55:42.151] SBL2:1210.0.1.0 [2025-09-23 22:55:42.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:55:42.312] j-A [2025-09-23 22:55:49.651] The R5 Autosar Classic is running [2025-09-23 22:55:49.676] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:55:49.676] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:55:50.283] INIT: version 2.96 booting [2025-09-23 22:55:50.395] INIT: Entering runlevel: 5 [2025-09-23 22:55:50.555] mtd28 attached [2025-09-23 22:55:50.555] mtd32 attached [2025-09-23 22:55:50.571] mtd24 attached [2025-09-23 22:55:50.619] ubi0:animations is mounted. [2025-09-23 22:55:50.619] RTNETLINK answers: File exists [2025-09-23 22:55:50.680] ubi2:textures is mounted. [2025-09-23 22:55:50.680] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:55:50.680] ubi1:dml_code is mounted. [2025-09-23 22:55:50.680] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:55:50.680] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:55:50.680] data.LB_FadeInType0=100 [2025-09-23 22:55:50.680] data.CHLH_FadeInType0=0 [2025-09-23 22:55:50.680] data.WU_FadeInDelay=0 [2025-09-23 22:55:50.680] max_time_out=0 [2025-09-23 22:55:50.680] No splash screen [2025-09-23 22:55:50.680] stop dss Done [2025-09-23 22:55:50.680] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:55:50.680] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:55:50.752] /dev/mem opened. [2025-09-23 22:55:50.752] Memory mapped at address 0xffff7fbc1000. [2025-09-23 22:55:50.752] Read at address 0x00600018 (0xffff7fbc1018): 0x00000000 [2025-09-23 22:55:50.752] Write at address 0x00600018 (0xffff7fbc1018): 0x00400040, readback 0x00400040 [2025-09-23 22:55:50.800] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:55:50.832] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:55:50.896] Loaded PowerVR consumer services. [2025-09-23 22:55:51.024] Waiting data available... [2025-09-23 22:55:51.024] 512+0 records in [2025-09-23 22:55:51.024] 512+0 records out [2025-09-23 22:55:51.072] Starting syslogd/klogd: done [2025-09-23 22:55:51.104] DML Start [2025-09-23 22:55:51.248] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:55:51.472] DML res1: 0 [2025-09-23 22:55:51.919] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:55:51.935] Read Success [2025-09-23 22:55:51.935] Verifying certificate... [2025-09-23 22:55:52.159] Verified OK [2025-09-23 22:55:52.175] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:55:53.899] Verified OK [2025-09-23 22:55:53.899] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:55:54.481] Verified OK [2025-09-23 22:55:54.481] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:55:57.008] fs.protected_hardlinks = 1 [2025-09-23 22:55:57.038] fs.protected_symlinks = 1 [2025-09-23 22:55:57.038] kernel.modules_disabled = 1 [2025-09-23 22:55:57.230] [2025-09-23 22:55:57.230] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:55:58.518] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:56:06.298] SBL1:1210.0.1.0 [2025-09-23 22:56:06.330] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:56:07.913] SBL2:1210.0.1.0 [2025-09-23 22:56:07.945] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:56:08.058] j-A [2025-09-23 22:56:15.432] The R5 Autosar Classic is running [2025-09-23 22:56:15.432] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:56:15.432] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:56:16.040] INIT: version 2.96 booting [2025-09-23 22:56:16.152] INIT: Entering runlevel: 5 [2025-09-23 22:56:16.311] mtd28 attached [2025-09-23 22:56:16.311] mtd24 attached [2025-09-23 22:56:16.343] mtd32 attached [2025-09-23 22:56:16.360] ubi0:animations is mounted. [2025-09-23 22:56:16.376] ubi1:textures is mounted. [2025-09-23 22:56:16.376] RTNETLINK answers: File exists [2025-09-23 22:56:16.418] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:56:16.418] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:56:16.418] ubi2:dml_code is mounted. [2025-09-23 22:56:16.418] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:56:16.418] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:56:16.418] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:56:16.418] data.LB_FadeInType0=100 [2025-09-23 22:56:16.439] data.CHLH_FadeInType0=0 [2025-09-23 22:56:16.439] data.WU_FadeInDelay=0 [2025-09-23 22:56:16.439] max_time_out=0 [2025-09-23 22:56:16.439] No splash screen [2025-09-23 22:56:16.439] stop dss Done [2025-09-23 22:56:16.455] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:56:16.455] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:56:16.525] /dev/mem opened. [2025-09-23 22:56:16.525] Memory mapped at address 0xffff8a0f6000. [2025-09-23 22:56:16.525] Read at address 0x00600018 (0xffff8a0f6018): 0x00000000 [2025-09-23 22:56:16.525] Write at address 0x00600018 (0xffff8a0f6018): 0x00400040, readback 0x00400040 [2025-09-23 22:56:16.636] Loaded PowerVR consumer services. [2025-09-23 22:56:16.765] Waiting data available... [2025-09-23 22:56:16.781] 512+0 records in [2025-09-23 22:56:16.781] 512+0 records out [2025-09-23 22:56:16.828] Starting syslogd/klogd: done [2025-09-23 22:56:16.844] DML Start [2025-09-23 22:56:17.036] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:56:17.244] DML res1: 0 [2025-09-23 22:56:17.748] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:56:17.748] Read Success [2025-09-23 22:56:17.748] Verifying certificate... [2025-09-23 22:56:17.971] Verified OK [2025-09-23 22:56:17.987] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:56:19.771] Verified OK [2025-09-23 22:56:19.771] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:56:20.351] Verified OK [2025-09-23 22:56:20.351] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:56:22.910] fs.protected_hardlinks = 1 [2025-09-23 22:56:22.926] fs.protected_symlinks = 1 [2025-09-23 22:56:22.926] kernel.modules_disabled = 1 [2025-09-23 22:56:23.118] [2025-09-23 22:56:23.118] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:56:24.331] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:56:32.037] SBL1:1210.0.1.0 [2025-09-23 22:56:32.085] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:56:33.652] SBL2:1210.0.1.0 [2025-09-23 22:56:33.699] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:56:33.812] j-A [2025-09-23 22:56:41.149] The R5 Autosar Classic is running [2025-09-23 22:56:41.180] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:56:41.180] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:56:41.788] INIT: version 2.96 booting [2025-09-23 22:56:41.900] INIT: Entering runlevel: 5 [2025-09-23 22:56:42.043] mtd24 attached [2025-09-23 22:56:42.059] mtd28 attached [2025-09-23 22:56:42.075] mtd32 attached [2025-09-23 22:56:42.091] ubi0:textures is mounted. [2025-09-23 22:56:42.123] ubi1:animations is mounted. [2025-09-23 22:56:42.123] RTNETLINK answers: File exists [2025-09-23 22:56:42.180] ubi2:dml_code is mounted. [2025-09-23 22:56:42.180] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:56:42.180] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:56:42.180] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:56:42.180] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:56:42.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:56:42.180] data.LB_FadeInType0=100 [2025-09-23 22:56:42.180] data.CHLH_FadeInType0=0 [2025-09-23 22:56:42.180] data.WU_FadeInDelay=0 [2025-09-23 22:56:42.180] max_time_out=0 [2025-09-23 22:56:42.180] No splash screen [2025-09-23 22:56:42.180] stop dss Done [2025-09-23 22:56:42.251] /dev/mem opened. [2025-09-23 22:56:42.251] Memory mapped at address 0xffff992c2000. [2025-09-23 22:56:42.251] Read at address 0x00600018 (0xffff992c2018): 0x00000000 [2025-09-23 22:56:42.251] Write at address 0x00600018 (0xffff992c2018): 0x00400040, readback 0x00400040 [2025-09-23 22:56:42.251] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:56:42.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:56:42.362] Loaded PowerVR consumer services. [2025-09-23 22:56:42.507] Waiting data available... [2025-09-23 22:56:42.523] 512+0 records in [2025-09-23 22:56:42.523] 512+0 records out [2025-09-23 22:56:42.570] Starting syslogd/klogd: done [2025-09-23 22:56:42.586] DML Start [2025-09-23 22:56:42.762] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:56:42.986] DML res1: 0 [2025-09-23 22:56:43.494] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:56:43.494] Read Success [2025-09-23 22:56:43.494] Verifying certificate... [2025-09-23 22:56:43.718] Verified OK [2025-09-23 22:56:43.734] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:56:45.490] Verified OK [2025-09-23 22:56:45.490] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:56:46.050] Verified OK [2025-09-23 22:56:46.050] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:56:48.481] fs.protected_hardlinks = 1 [2025-09-23 22:56:48.496] fs.protected_symlinks = 1 [2025-09-23 22:56:48.496] kernel.modules_disabled = 1 [2025-09-23 22:56:48.705] [2025-09-23 22:56:48.705] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:56:50.015] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:56:57.815] SBL1:1210.0.1.0 [2025-09-23 22:56:57.847] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:56:59.429] SBL2:1210.0.1.0 [2025-09-23 22:56:59.461] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:56:59.573] j-A [2025-09-23 22:57:06.945] The R5 Autosar Classic is running [2025-09-23 22:57:06.945] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:57:06.945] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:57:07.553] INIT: version 2.96 booting [2025-09-23 22:57:07.664] INIT: Entering runlevel: 5 [2025-09-23 22:57:07.808] mtd28 attached [2025-09-23 22:57:07.824] mtd32 attached [2025-09-23 22:57:07.840] mtd24 attached [2025-09-23 22:57:07.887] ubi0:animations is mounted. [2025-09-23 22:57:07.887] RTNETLINK answers: File exists [2025-09-23 22:57:07.925] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:57:07.925] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:57:07.925] ubi2:textures is mounted. [2025-09-23 22:57:07.925] ubi1:dml_code is mounted. [2025-09-23 22:57:07.925] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:57:07.925] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:57:07.925] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:57:07.925] data.LB_FadeInType0=100 [2025-09-23 22:57:07.946] data.CHLH_FadeInType0=0 [2025-09-23 22:57:07.946] data.WU_FadeInDelay=0 [2025-09-23 22:57:07.946] max_time_out=0 [2025-09-23 22:57:07.946] No splash screen [2025-09-23 22:57:07.946] stop dss Done [2025-09-23 22:57:08.026] /dev/mem opened. [2025-09-23 22:57:08.026] Memory mapped at address 0xffff9df43000. [2025-09-23 22:57:08.026] Read at address 0x00600018 (0xffff9df43018): 0x00000000 [2025-09-23 22:57:08.026] Write at address 0x00600018 (0xffff9df43018): 0x00400040, readback 0x00400040 [2025-09-23 22:57:08.026] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:57:08.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:57:08.106] Loaded PowerVR consumer services. [2025-09-23 22:57:08.281] Waiting data available... [2025-09-23 22:57:08.297] 512+0 records in [2025-09-23 22:57:08.297] 512+0 records out [2025-09-23 22:57:08.346] Starting syslogd/klogd: done [2025-09-23 22:57:08.362] DML Start [2025-09-23 22:57:08.553] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:57:08.761] DML res1: 0 [2025-09-23 22:57:09.209] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:57:09.225] Read Success [2025-09-23 22:57:09.225] Verifying certificate... [2025-09-23 22:57:09.497] Verified OK [2025-09-23 22:57:09.513] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:57:11.268] Verified OK [2025-09-23 22:57:11.268] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:57:11.776] Verified OK [2025-09-23 22:57:11.776] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:57:14.207] fs.protected_hardlinks = 1 [2025-09-23 22:57:14.222] fs.protected_symlinks = 1 [2025-09-23 22:57:14.222] kernel.modules_disabled = 1 [2025-09-23 22:57:14.430] [2025-09-23 22:57:14.430] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:57:15.795] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:57:23.559] SBL1:1210.0.1.0 [2025-09-23 22:57:23.607] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:57:25.173] SBL2:1210.0.1.0 [2025-09-23 22:57:25.221] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:57:25.318] j-A [2025-09-23 22:57:32.672] The R5 Autosar Classic is running [2025-09-23 22:57:32.672] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:57:32.693] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:57:33.300] INIT: version 2.96 booting [2025-09-23 22:57:33.411] INIT: Entering runlevel: 5 [2025-09-23 22:57:33.556] mtd28 attached [2025-09-23 22:57:33.572] mtd32 attached [2025-09-23 22:57:33.588] mtd24 attached [2025-09-23 22:57:33.670] ubi0:animations is mounted. [2025-09-23 22:57:33.670] RTNETLINK answers: File exists [2025-09-23 22:57:33.670] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:57:33.670] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:57:33.670] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:57:33.670] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:57:33.670] ubi1:dml_code is mounted. [2025-09-23 22:57:33.670] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:57:33.670] ubi2:textures is mounted. [2025-09-23 22:57:33.693] data.LB_FadeInType0=100 [2025-09-23 22:57:33.693] data.CHLH_FadeInType0=0 [2025-09-23 22:57:33.693] data.WU_FadeInDelay=0 [2025-09-23 22:57:33.693] max_time_out=0 [2025-09-23 22:57:33.693] No splash screen [2025-09-23 22:57:33.693] stop dss Done [2025-09-23 22:57:33.725] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:57:33.741] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:57:33.777] /dev/mem opened. [2025-09-23 22:57:33.777] Memory mapped at address 0xffff8e794000. [2025-09-23 22:57:33.777] Read at address 0x00600018 (0xffff8e794018): 0x00000000 [2025-09-23 22:57:33.777] Write at address 0x00600018 (0xffff8e794018): 0x00400040, readback 0x00400040 [2025-09-23 22:57:33.985] Loaded PowerVR consumer services. [2025-09-23 22:57:34.046] 512+0 records in [2025-09-23 22:57:34.046] 512+0 records out [2025-09-23 22:57:34.046] Waiting data available... [2025-09-23 22:57:34.078] Starting syslogd/klogd: done [2025-09-23 22:57:34.094] DML Start [2025-09-23 22:57:34.238] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:57:34.446] DML res1: 0 [2025-09-23 22:57:34.957] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:57:34.957] Read Success [2025-09-23 22:57:34.973] Verifying certificate... [2025-09-23 22:57:35.181] Verified OK [2025-09-23 22:57:35.197] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:57:36.812] Verified OK [2025-09-23 22:57:36.833] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:57:37.429] Verified OK [2025-09-23 22:57:37.429] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:57:40.147] fs.protected_hardlinks = 1 [2025-09-23 22:57:40.163] fs.protected_symlinks = 1 [2025-09-23 22:57:40.163] kernel.modules_disabled = 1 [2025-09-23 22:57:40.371] [2025-09-23 22:57:40.371] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:57:41.562] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:57:49.337] SBL1:1210.0.1.0 [2025-09-23 22:57:49.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:57:50.952] SBL2:1210.0.1.0 [2025-09-23 22:57:50.999] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:57:51.095] j-A [2025-09-23 22:57:58.450] The R5 Autosar Classic is running [2025-09-23 22:57:58.475] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:57:58.475] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:57:59.083] INIT: version 2.96 booting [2025-09-23 22:57:59.195] INIT: Entering runlevel: 5 [2025-09-23 22:57:59.354] mtd24 attached [2025-09-23 22:57:59.354] mtd28 attached [2025-09-23 22:57:59.370] mtd32 attached [2025-09-23 22:57:59.418] ubi0:textures is mounted. [2025-09-23 22:57:59.484] RTNETLINK answers: File exists [2025-09-23 22:57:59.484] ubi1:animations is mounted. [2025-09-23 22:57:59.484] ubi2:dml_code is mounted. [2025-09-23 22:57:59.484] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:57:59.484] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:57:59.484] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:57:59.484] data.LB_FadeInType0=100 [2025-09-23 22:57:59.484] data.CHLH_FadeInType0=0 [2025-09-23 22:57:59.484] data.WU_FadeInDelay=0 [2025-09-23 22:57:59.484] max_time_out=0 [2025-09-23 22:57:59.484] No splash screen [2025-09-23 22:57:59.484] stop dss Done [2025-09-23 22:57:59.484] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:57:59.484] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:57:59.517] /dev/mem opened. [2025-09-23 22:57:59.517] Memory mapped at address 0xffffa2a30000. [2025-09-23 22:57:59.543] Read at address 0x00600018 (0xffffa2a30018): 0x00000000 [2025-09-23 22:57:59.543] Write at address 0x00600018 (0xffffa2a30018): 0x00400040, readback 0x00400040 [2025-09-23 22:57:59.559] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:57:59.590] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:57:59.797] Waiting data available... [2025-09-23 22:57:59.797] Loaded PowerVR consumer services. [2025-09-23 22:57:59.845] 512+0 records in [2025-09-23 22:57:59.845] 512+0 records out [2025-09-23 22:57:59.877] Starting syslogd/klogd: done [2025-09-23 22:57:59.893] DML Start [2025-09-23 22:58:00.037] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:58:00.261] DML res1: 0 [2025-09-23 22:58:00.804] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:58:00.820] Read Success [2025-09-23 22:58:00.820] Verifying certificate... [2025-09-23 22:58:01.092] Verified OK [2025-09-23 22:58:01.108] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:58:02.875] Verified OK [2025-09-23 22:58:02.875] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:58:03.369] Verified OK [2025-09-23 22:58:03.369] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:58:05.799] fs.protected_hardlinks = 1 [2025-09-23 22:58:05.815] fs.protected_symlinks = 1 [2025-09-23 22:58:05.815] kernel.modules_disabled = 1 [2025-09-23 22:58:06.007] [2025-09-23 22:58:06.007] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:58:07.371] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:58:15.079] SBL1:1210.0.1.0 [2025-09-23 22:58:15.127] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:58:16.693] SBL2:1210.0.1.0 [2025-09-23 22:58:16.741] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:58:16.838] j-A [2025-09-23 22:58:24.193] The R5 Autosar Classic is running [2025-09-23 22:58:24.193] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:58:24.214] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:58:24.821] INIT: version 2.96 booting [2025-09-23 22:58:24.934] INIT: Entering runlevel: 5 [2025-09-23 22:58:25.093] mtd24 attached [2025-09-23 22:58:25.093] mtd32 attached [2025-09-23 22:58:25.109] mtd28 attached [2025-09-23 22:58:25.125] ubi0:textures is mounted. [2025-09-23 22:58:25.141] ubi1:dml_code is mounted. [2025-09-23 22:58:25.157] RTNETLINK answers: File exists [2025-09-23 22:58:25.216] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:58:25.216] ubi2:animations is mounted. [2025-09-23 22:58:25.216] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:58:25.216] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:58:25.216] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:58:25.216] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:58:25.216] data.LB_FadeInType0=100 [2025-09-23 22:58:25.216] data.CHLH_FadeInType0=0 [2025-09-23 22:58:25.216] data.WU_FadeInDelay=0 [2025-09-23 22:58:25.216] max_time_out=0 [2025-09-23 22:58:25.216] No splash screen [2025-09-23 22:58:25.216] stop dss Done [2025-09-23 22:58:25.232] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:58:25.257] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:58:25.297] /dev/mem opened. [2025-09-23 22:58:25.297] Memory mapped at address 0xffff81e31000. [2025-09-23 22:58:25.297] Read at address 0x00600018 (0xffff81e31018): 0x00000000 [2025-09-23 22:58:25.297] Write at address 0x00600018 (0xffff81e31018): 0x00400040, readback 0x00400040 [2025-09-23 22:58:25.505] Loaded PowerVR consumer services. [2025-09-23 22:58:25.537] Waiting data available... [2025-09-23 22:58:25.553] 512+0 records in [2025-09-23 22:58:25.569] 512+0 records out [2025-09-23 22:58:25.584] Starting syslogd/klogd: done [2025-09-23 22:58:25.616] DML Start [2025-09-23 22:58:25.793] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:58:26.017] DML res1: 0 [2025-09-23 22:58:26.448] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:58:26.469] Read Success [2025-09-23 22:58:26.469] Verifying certificate... [2025-09-23 22:58:26.709] Verified OK [2025-09-23 22:58:26.725] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:58:28.409] Verified OK [2025-09-23 22:58:28.409] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:58:29.092] Verified OK [2025-09-23 22:58:29.092] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:58:31.698] fs.protected_hardlinks = 1 [2025-09-23 22:58:31.714] fs.protected_symlinks = 1 [2025-09-23 22:58:31.714] kernel.modules_disabled = 1 [2025-09-23 22:58:31.922] [2025-09-23 22:58:31.922] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:58:33.057] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:58:40.835] SBL1:1210.0.1.0 [2025-09-23 22:58:40.883] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:58:42.449] SBL2:1210.0.1.0 [2025-09-23 22:58:42.497] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:58:42.593] j-A [2025-09-23 22:58:49.949] The R5 Autosar Classic is running [2025-09-23 22:58:49.949] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:58:49.970] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:58:50.578] INIT: version 2.96 booting [2025-09-23 22:58:50.690] INIT: Entering runlevel: 5 [2025-09-23 22:58:50.850] mtd28 attached [2025-09-23 22:58:50.866] mtd32 attached [2025-09-23 22:58:50.866] mtd24 attached [2025-09-23 22:58:50.882] ubi0:animations is mounted. [2025-09-23 22:58:50.914] ubi1:dml_code is mounted. [2025-09-23 22:58:50.942] RTNETLINK answers: File exists [2025-09-23 22:58:50.943] ubi2:textures is mounted. [2025-09-23 22:58:50.943] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:58:50.982] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:58:50.982] data.LB_FadeInType0=100 [2025-09-23 22:58:50.982] data.CHLH_FadeInType0=0 [2025-09-23 22:58:50.982] data.WU_FadeInDelay=0 [2025-09-23 22:58:50.982] max_time_out=0 [2025-09-23 22:58:50.982] No splash screen [2025-09-23 22:58:50.982] stop dss Done [2025-09-23 22:58:50.982] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:58:50.982] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:58:50.982] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:58:51.047] /dev/mem opened. [2025-09-23 22:58:51.047] Memory mapped at address 0xfffface75000. [2025-09-23 22:58:51.047] Read at address 0x00600018 (0xfffface75018): 0x00000000 [2025-09-23 22:58:51.047] Write at address 0x00600018 (0xfffface75018): 0x00400040, readback 0x00400040 [2025-09-23 22:58:51.063] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:58:51.079] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:58:51.128] Loaded PowerVR consumer services. [2025-09-23 22:58:51.334] Waiting data available... [2025-09-23 22:58:51.334] 512+0 records in [2025-09-23 22:58:51.334] 512+0 records out [2025-09-23 22:58:51.350] Starting syslogd/klogd: done [2025-09-23 22:58:51.366] DML Start [2025-09-23 22:58:51.509] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:58:51.685] DML res1: 0 [2025-09-23 22:58:52.180] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:58:52.196] Read Success [2025-09-23 22:58:52.196] Verifying certificate... [2025-09-23 22:58:52.421] Verified OK [2025-09-23 22:58:52.437] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:58:54.190] Verified OK [2025-09-23 22:58:54.190] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:58:54.748] Verified OK [2025-09-23 22:58:54.748] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:58:57.209] fs.protected_hardlinks = 1 [2025-09-23 22:58:57.209] fs.protected_symlinks = 1 [2025-09-23 22:58:57.225] kernel.modules_disabled = 1 [2025-09-23 22:58:57.418] [2025-09-23 22:58:57.418] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:58:58.825] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:59:06.576] SBL1:1210.0.1.0 [2025-09-23 22:59:06.624] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:59:08.191] SBL2:1210.0.1.0 [2025-09-23 22:59:08.239] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:59:08.335] j-A [2025-09-23 22:59:15.691] The R5 Autosar Classic is running [2025-09-23 22:59:15.713] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:59:15.713] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:59:16.321] INIT: version 2.96 booting [2025-09-23 22:59:16.432] INIT: Entering runlevel: 5 [2025-09-23 22:59:16.593] mtd32 attached [2025-09-23 22:59:16.593] mtd24 attached [2025-09-23 22:59:16.624] mtd28 attached [2025-09-23 22:59:16.640] ubi0:dml_code is mounted. [2025-09-23 22:59:16.656] ubi1:textures is mounted. [2025-09-23 22:59:16.656] RTNETLINK answers: File exists [2025-09-23 22:59:16.710] ubi2:animations is mounted. [2025-09-23 22:59:16.710] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:59:16.710] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:59:16.710] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:59:16.710] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:59:16.710] data.LB_FadeInType0=100 [2025-09-23 22:59:16.710] data.CHLH_FadeInType0=0 [2025-09-23 22:59:16.710] data.WU_FadeInDelay=0 [2025-09-23 22:59:16.710] max_time_out=0 [2025-09-23 22:59:16.710] No splash screen [2025-09-23 22:59:16.710] stop dss Done [2025-09-23 22:59:16.710] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:59:16.785] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:59:16.785] /dev/mem opened. [2025-09-23 22:59:16.785] Memory mapped at address 0xffff9251f000. [2025-09-23 22:59:16.785] Read at address 0x00600018 (0xffff9251f018): 0x00000000 [2025-09-23 22:59:16.785] Write at address 0x00600018 (0xffff9251f018): 0x00400040, readback 0x00400040 [2025-09-23 22:59:16.785] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:59:16.881] Loaded PowerVR consumer services. [2025-09-23 22:59:17.041] Waiting data available... [2025-09-23 22:59:17.056] 512+0 records in [2025-09-23 22:59:17.056] 512+0 records out [2025-09-23 22:59:17.088] Starting syslogd/klogd: done [2025-09-23 22:59:17.104] DML Start [2025-09-23 22:59:17.313] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:59:17.536] DML res1: 0 [2025-09-23 22:59:17.904] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:59:17.925] Read Success [2025-09-23 22:59:17.925] Verifying certificate... [2025-09-23 22:59:18.181] Verified OK [2025-09-23 22:59:18.196] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:59:19.844] Verified OK [2025-09-23 22:59:19.844] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:59:20.476] Verified OK [2025-09-23 22:59:20.476] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:59:23.147] fs.protected_hardlinks = 1 [2025-09-23 22:59:23.163] fs.protected_symlinks = 1 [2025-09-23 22:59:23.163] kernel.modules_disabled = 1 [2025-09-23 22:59:23.354] [2025-09-23 22:59:23.354] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:59:24.570] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:59:32.326] SBL1:1210.0.1.0 [2025-09-23 22:59:32.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:59:33.941] SBL2:1210.0.1.0 [2025-09-23 22:59:33.973] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:59:34.086] j-A [2025-09-23 22:59:41.441] The R5 Autosar Classic is running [2025-09-23 22:59:41.441] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 22:59:41.462] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 22:59:42.069] INIT: version 2.96 booting [2025-09-23 22:59:42.181] INIT: Entering runlevel: 5 [2025-09-23 22:59:42.325] mtd28 attached [2025-09-23 22:59:42.342] mtd24 attached [2025-09-23 22:59:42.390] ubi0:animations is mounted. [2025-09-23 22:59:42.390] RTNETLINK answers: File exists [2025-09-23 22:59:42.443] mtd32 attached [2025-09-23 22:59:42.443] ubi1:textures is mounted. [2025-09-23 22:59:42.443] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 22:59:42.443] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 22:59:42.443] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 22:59:42.443] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 22:59:42.443] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 22:59:42.443] ubi2:dml_code is mounted. [2025-09-23 22:59:42.472] data.LB_FadeInType0=100 [2025-09-23 22:59:42.472] data.CHLH_FadeInType0=0 [2025-09-23 22:59:42.472] data.WU_FadeInDelay=0 [2025-09-23 22:59:42.472] max_time_out=0 [2025-09-23 22:59:42.472] No splash screen [2025-09-23 22:59:42.472] stop dss Done [2025-09-23 22:59:42.497] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 22:59:42.497] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 22:59:42.529] /dev/mem opened. [2025-09-23 22:59:42.529] Memory mapped at address 0xffffa7b32000. [2025-09-23 22:59:42.555] Read at address 0x00600018 (0xffffa7b32018): 0x00000000 [2025-09-23 22:59:42.555] Write at address 0x00600018 (0xffffa7b32018): 0x00400040, readback 0x00400040 [2025-09-23 22:59:42.667] Loaded PowerVR consumer services. [2025-09-23 22:59:42.811] Waiting data available... [2025-09-23 22:59:42.811] 512+0 records in [2025-09-23 22:59:42.811] 512+0 records out [2025-09-23 22:59:42.875] Starting syslogd/klogd: done [2025-09-23 22:59:42.891] DML Start [2025-09-23 22:59:43.051] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 22:59:43.274] DML res1: 0 [2025-09-23 22:59:43.706] Read DML Algo certificate (mtd31) and save to file [2025-09-23 22:59:43.727] Read Success [2025-09-23 22:59:43.727] Verifying certificate... [2025-09-23 22:59:43.983] Verified OK [2025-09-23 22:59:43.999] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 22:59:45.796] Verified OK [2025-09-23 22:59:45.796] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 22:59:46.228] Verified OK [2025-09-23 22:59:46.228] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 22:59:48.578] fs.protected_hardlinks = 1 [2025-09-23 22:59:48.578] fs.protected_symlinks = 1 [2025-09-23 22:59:48.594] kernel.modules_disabled = 1 [2025-09-23 22:59:48.787] [2025-09-23 22:59:48.787] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 22:59:50.295] RTNETLINK answers: Cannot assign requested address [2025-09-23 22:59:58.072] SBL1:1210.0.1.0 [2025-09-23 22:59:58.120] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:59:59.686] SBL2:1210.0.1.0 [2025-09-23 22:59:59.734] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 22:59:59.831] j-A [2025-09-23 23:00:07.185] The R5 Autosar Classic is running [2025-09-23 23:00:07.209] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:00:07.209] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:00:07.816] INIT: version 2.96 booting [2025-09-23 23:00:07.929] INIT: Entering runlevel: 5 [2025-09-23 23:00:08.088] mtd28 attached [2025-09-23 23:00:08.088] mtd24 attached [2025-09-23 23:00:08.104] mtd32 attached [2025-09-23 23:00:08.189] RTNETLINK answers: File exists [2025-09-23 23:00:08.189] ubi0:animations is mounted. [2025-09-23 23:00:08.189] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:00:08.189] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:00:08.189] ubi1:textures is mounted. [2025-09-23 23:00:08.189] ubi2:dml_code is mounted. [2025-09-23 23:00:08.189] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:00:08.189] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:00:08.189] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:00:08.189] data.LB_FadeInType0=100 [2025-09-23 23:00:08.210] data.CHLH_FadeInType0=0 [2025-09-23 23:00:08.210] data.WU_FadeInDelay=0 [2025-09-23 23:00:08.210] max_time_out=0 [2025-09-23 23:00:08.210] No splash screen [2025-09-23 23:00:08.210] stop dss Done [2025-09-23 23:00:08.242] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:00:08.242] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:00:08.284] /dev/mem opened. [2025-09-23 23:00:08.284] Memory mapped at address 0xffffac639000. [2025-09-23 23:00:08.284] Read at address 0x00600018 (0xffffac639018): 0x00000000 [2025-09-23 23:00:08.284] Write at address 0x00600018 (0xffffac639018): 0x00400040, readback 0x00400040 [2025-09-23 23:00:08.379] Loaded PowerVR consumer services. [2025-09-23 23:00:08.586] Waiting data available... [2025-09-23 23:00:08.586] 512+0 records in [2025-09-23 23:00:08.586] 512+0 records out [2025-09-23 23:00:08.617] Starting syslogd/klogd: done [2025-09-23 23:00:08.649] DML Start [2025-09-23 23:00:08.841] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:00:09.049] DML res1: 0 [2025-09-23 23:00:09.494] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:00:09.494] Read Success [2025-09-23 23:00:09.494] Verifying certificate... [2025-09-23 23:00:09.733] Verified OK [2025-09-23 23:00:09.750] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:00:11.408] Verified OK [2025-09-23 23:00:11.408] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:00:11.903] Verified OK [2025-09-23 23:00:11.903] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:00:14.494] fs.protected_hardlinks = 1 [2025-09-23 23:00:14.525] fs.protected_symlinks = 1 [2025-09-23 23:00:14.525] kernel.modules_disabled = 1 [2025-09-23 23:00:14.717] [2025-09-23 23:00:14.717] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:00:16.124] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:00:23.831] SBL1:1210.0.1.0 [2025-09-23 23:00:23.879] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:00:25.446] SBL2:1210.0.1.0 [2025-09-23 23:00:25.494] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:00:25.590] j-A [2025-09-23 23:00:32.944] The R5 Autosar Classic is running [2025-09-23 23:00:32.965] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:00:32.965] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:00:33.573] INIT: version 2.96 booting [2025-09-23 23:00:33.684] INIT: Entering runlevel: 5 [2025-09-23 23:00:33.828] mtd24 attached [2025-09-23 23:00:33.844] mtd28 attached [2025-09-23 23:00:33.860] mtd32 attached [2025-09-23 23:00:33.892] ubi1:animations is mounted. [2025-09-23 23:00:33.908] RTNETLINK answers: File exists [2025-09-23 23:00:33.908] ubi0:textures is mounted. [2025-09-23 23:00:33.963] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:00:33.963] ubi2:dml_code is mounted. [2025-09-23 23:00:33.963] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:00:33.963] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:00:33.963] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:00:33.963] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:00:33.963] data.LB_FadeInType0=100 [2025-09-23 23:00:33.963] data.CHLH_FadeInType0=0 [2025-09-23 23:00:33.963] data.WU_FadeInDelay=0 [2025-09-23 23:00:33.963] max_time_out=0 [2025-09-23 23:00:33.963] No splash screen [2025-09-23 23:00:33.963] stop dss Done [2025-09-23 23:00:34.002] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:00:34.002] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:00:34.019] /dev/mem opened. [2025-09-23 23:00:34.019] Memory mapped at address 0xffffbcc6a000. [2025-09-23 23:00:34.046] Read at address 0x00600018 (0xffffbcc6a018): 0x00000000 [2025-09-23 23:00:34.046] Write at address 0x00600018 (0xffffbcc6a018): 0x00400040, readback 0x00400040 [2025-09-23 23:00:34.157] Loaded PowerVR consumer services. [2025-09-23 23:00:34.302] Waiting data available... [2025-09-23 23:00:34.318] 512+0 records in [2025-09-23 23:00:34.318] 512+0 records out [2025-09-23 23:00:34.365] Starting syslogd/klogd: done [2025-09-23 23:00:34.381] DML Start [2025-09-23 23:00:34.557] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:00:34.781] DML res1: 0 [2025-09-23 23:00:35.227] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:00:35.227] Read Success [2025-09-23 23:00:35.227] Verifying certificate... [2025-09-23 23:00:35.514] Verified OK [2025-09-23 23:00:35.546] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:00:37.104] Verified OK [2025-09-23 23:00:37.104] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:00:37.737] Verified OK [2025-09-23 23:00:37.737] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:00:40.392] fs.protected_hardlinks = 1 [2025-09-23 23:00:40.392] fs.protected_symlinks = 1 [2025-09-23 23:00:40.407] kernel.modules_disabled = 1 [2025-09-23 23:00:40.600] [2025-09-23 23:00:40.600] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:00:41.790] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:00:49.605] SBL1:1210.0.1.0 [2025-09-23 23:00:49.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:00:51.220] SBL2:1210.0.1.0 [2025-09-23 23:00:51.268] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:00:51.379] j-A [2025-09-23 23:00:58.718] The R5 Autosar Classic is running [2025-09-23 23:00:58.743] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:00:58.743] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:00:59.349] INIT: version 2.96 booting [2025-09-23 23:00:59.462] INIT: Entering runlevel: 5 [2025-09-23 23:00:59.622] mtd24 attached [2025-09-23 23:00:59.622] mtd32 attached [2025-09-23 23:00:59.637] mtd28 attached [2025-09-23 23:00:59.653] ubi0:textures is mounted. [2025-09-23 23:00:59.669] ubi1:dml_code is mounted. [2025-09-23 23:00:59.685] RTNETLINK answers: File exists [2025-09-23 23:00:59.740] ubi2:animations is mounted. [2025-09-23 23:00:59.740] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:00:59.740] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:00:59.740] data.LB_FadeInType0=100 [2025-09-23 23:00:59.740] data.CHLH_FadeInType0=0 [2025-09-23 23:00:59.740] data.WU_FadeInDelay=0 [2025-09-23 23:00:59.740] max_time_out=0 [2025-09-23 23:00:59.740] No splash screen [2025-09-23 23:00:59.740] stop dss Done [2025-09-23 23:00:59.740] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:00:59.740] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:00:59.740] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:00:59.772] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:00:59.805] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:00:59.805] /dev/mem opened. [2025-09-23 23:00:59.805] Memory mapped at address 0xffffb6167000. [2025-09-23 23:00:59.805] Read at address 0x00600018 (0xffffb6167018): 0x00000000 [2025-09-23 23:00:59.805] Write at address 0x00600018 (0xffffb6167018): 0x00400040, readback 0x00400040 [2025-09-23 23:01:00.013] Loaded PowerVR consumer services. [2025-09-23 23:01:00.077] Waiting data available... [2025-09-23 23:01:00.109] 512+0 records in [2025-09-23 23:01:00.109] 512+0 records out [2025-09-23 23:01:00.125] Starting syslogd/klogd: done [2025-09-23 23:01:00.141] DML Start [2025-09-23 23:01:00.301] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:01:00.540] DML res1: 0 [2025-09-23 23:01:01.027] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:01:01.027] Read Success [2025-09-23 23:01:01.027] Verifying certificate... [2025-09-23 23:01:01.299] Verified OK [2025-09-23 23:01:01.330] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:01:02.913] Verified OK [2025-09-23 23:01:02.913] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:01:03.527] Verified OK [2025-09-23 23:01:03.527] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:01:06.133] fs.protected_hardlinks = 1 [2025-09-23 23:01:06.133] fs.protected_symlinks = 1 [2025-09-23 23:01:06.149] kernel.modules_disabled = 1 [2025-09-23 23:01:06.341] [2025-09-23 23:01:06.341] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:01:07.618] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:01:15.360] SBL1:1210.0.1.0 [2025-09-23 23:01:15.408] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:01:16.975] SBL2:1210.0.1.0 [2025-09-23 23:01:17.023] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:01:17.118] j-A [2025-09-23 23:01:24.472] The R5 Autosar Classic is running [2025-09-23 23:01:24.495] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:01:24.495] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:01:25.103] INIT: version 2.96 booting [2025-09-23 23:01:25.215] INIT: Entering runlevel: 5 [2025-09-23 23:01:25.375] mtd24 attached [2025-09-23 23:01:25.391] mtd32 attached [2025-09-23 23:01:25.407] mtd28 attached [2025-09-23 23:01:25.439] ubi0:textures is mounted. [2025-09-23 23:01:25.455] RTNETLINK answers: File exists [2025-09-23 23:01:25.455] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:01:25.513] ubi2:animations is mounted. [2025-09-23 23:01:25.513] ubi1:dml_code is mounted. [2025-09-23 23:01:25.513] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:01:25.513] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:01:25.513] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:01:25.513] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:01:25.513] data.LB_FadeInType0=100 [2025-09-23 23:01:25.513] data.CHLH_FadeInType0=0 [2025-09-23 23:01:25.513] data.WU_FadeInDelay=0 [2025-09-23 23:01:25.513] max_time_out=0 [2025-09-23 23:01:25.513] No splash screen [2025-09-23 23:01:25.513] stop dss Done [2025-09-23 23:01:25.560] /dev/mem opened. [2025-09-23 23:01:25.560] Memory mapped at address 0xffff8c6e8000. [2025-09-23 23:01:25.593] Read at address 0x00600018 (0xffff8c6e8018): 0x00000000 [2025-09-23 23:01:25.593] Write at address 0x00600018 (0xffff8c6e8018): 0x00400040, readback 0x00400040 [2025-09-23 23:01:25.593] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:01:25.593] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:01:25.768] Loaded PowerVR consumer services. [2025-09-23 23:01:25.848] Waiting data available... [2025-09-23 23:01:25.864] 512+0 records in [2025-09-23 23:01:25.864] 512+0 records out [2025-09-23 23:01:25.913] Starting syslogd/klogd: done [2025-09-23 23:01:25.929] DML Start [2025-09-23 23:01:26.121] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:01:26.375] DML res1: 0 [2025-09-23 23:01:26.781] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:01:26.781] Read Success [2025-09-23 23:01:26.781] Verifying certificate... [2025-09-23 23:01:27.005] Verified OK [2025-09-23 23:01:27.021] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:01:28.615] Verified OK [2025-09-23 23:01:28.615] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:01:29.270] Verified OK [2025-09-23 23:01:29.270] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:01:31.940] fs.protected_hardlinks = 1 [2025-09-23 23:01:31.940] fs.protected_symlinks = 1 [2025-09-23 23:01:31.957] kernel.modules_disabled = 1 [2025-09-23 23:01:32.148] [2025-09-23 23:01:32.148] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:01:33.438] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:01:41.121] SBL1:1210.0.1.0 [2025-09-23 23:01:41.169] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:01:42.735] SBL2:1210.0.1.0 [2025-09-23 23:01:42.783] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:01:42.879] j-A [2025-09-23 23:01:50.233] The R5 Autosar Classic is running [2025-09-23 23:01:50.257] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:01:50.257] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:01:50.864] INIT: version 2.96 booting [2025-09-23 23:01:50.977] INIT: Entering runlevel: 5 [2025-09-23 23:01:51.137] mtd24 attached [2025-09-23 23:01:51.153] mtd28 attached [2025-09-23 23:01:51.168] mtd32 attached [2025-09-23 23:01:51.200] ubi0:textures is mounted. [2025-09-23 23:01:51.216] RTNETLINK answers: File exists [2025-09-23 23:01:51.216] ubi1:animations is mounted. [2025-09-23 23:01:51.267] ubi2:dml_code is mounted. [2025-09-23 23:01:51.267] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:01:51.267] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:01:51.267] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:01:51.267] data.LB_FadeInType0=100 [2025-09-23 23:01:51.267] data.CHLH_FadeInType0=0 [2025-09-23 23:01:51.267] data.WU_FadeInDelay=0 [2025-09-23 23:01:51.267] max_time_out=0 [2025-09-23 23:01:51.267] No splash screen [2025-09-23 23:01:51.267] stop dss Done [2025-09-23 23:01:51.267] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:01:51.267] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:01:51.336] /dev/mem opened. [2025-09-23 23:01:51.336] Memory mapped at address 0xffff97bf1000. [2025-09-23 23:01:51.336] Read at address 0x00600018 (0xffff97bf1018): 0x00000000 [2025-09-23 23:01:51.336] Write at address 0x00600018 (0xffff97bf1018): 0x00400040, readback 0x00400040 [2025-09-23 23:01:51.351] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:01:51.368] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:01:51.463] Loaded PowerVR consumer services. [2025-09-23 23:01:51.607] Waiting data available... [2025-09-23 23:01:51.623] 512+0 records in [2025-09-23 23:01:51.639] 512+0 records out [2025-09-23 23:01:51.655] Starting syslogd/klogd: done [2025-09-23 23:01:51.671] DML Start [2025-09-23 23:01:51.863] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:01:52.086] DML res1: 0 [2025-09-23 23:01:52.532] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:01:52.532] Read Success [2025-09-23 23:01:52.532] Verifying certificate... [2025-09-23 23:01:52.788] Verified OK [2025-09-23 23:01:52.804] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:01:54.553] Verified OK [2025-09-23 23:01:54.553] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:01:55.110] Verified OK [2025-09-23 23:01:55.110] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:01:57.636] fs.protected_hardlinks = 1 [2025-09-23 23:01:57.636] fs.protected_symlinks = 1 [2025-09-23 23:01:57.651] kernel.modules_disabled = 1 [2025-09-23 23:01:57.827] [2025-09-23 23:01:57.843] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:01:59.103] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:02:06.871] SBL1:1210.0.1.0 [2025-09-23 23:02:06.903] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:02:08.486] SBL2:1210.0.1.0 [2025-09-23 23:02:08.518] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:02:08.630] j-A [2025-09-23 23:02:16.003] The R5 Autosar Classic is running [2025-09-23 23:02:16.003] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:02:16.003] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:02:16.610] INIT: version 2.96 booting [2025-09-23 23:02:16.723] INIT: Entering runlevel: 5 [2025-09-23 23:02:16.882] mtd28 attached [2025-09-23 23:02:16.882] mtd24 attached [2025-09-23 23:02:16.914] ubi0:animations is mounted. [2025-09-23 23:02:16.930] mtd32 attached [2025-09-23 23:02:16.930] ubi1:textures is mounted. [2025-09-23 23:02:16.946] RTNETLINK answers: File exists [2025-09-23 23:02:16.976] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:02:16.976] ubi2:dml_code is mounted. [2025-09-23 23:02:16.976] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:02:16.976] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:02:17.010] data.LB_FadeInType0=100 [2025-09-23 23:02:17.010] data.CHLH_FadeInType0=0 [2025-09-23 23:02:17.010] data.WU_FadeInDelay=0 [2025-09-23 23:02:17.010] max_time_out=0 [2025-09-23 23:02:17.010] No splash screen [2025-09-23 23:02:17.010] stop dss Done [2025-09-23 23:02:17.010] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:02:17.010] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:02:17.090] /dev/mem opened. [2025-09-23 23:02:17.090] Memory mapped at address 0xffffb61c5000. [2025-09-23 23:02:17.090] Read at address 0x00600018 (0xffffb61c5018): 0x00000000 [2025-09-23 23:02:17.090] Write at address 0x00600018 (0xffffb61c5018): 0x00400040, readback 0x00400040 [2025-09-23 23:02:17.090] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:02:17.106] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:02:17.202] Loaded PowerVR consumer services. [2025-09-23 23:02:17.359] Waiting data available... [2025-09-23 23:02:17.359] 512+0 records in [2025-09-23 23:02:17.359] 512+0 records out [2025-09-23 23:02:17.391] Starting syslogd/klogd: done [2025-09-23 23:02:17.407] DML Start [2025-09-23 23:02:17.599] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:02:17.823] DML res1: 0 [2025-09-23 23:02:18.222] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:02:18.243] Read Success [2025-09-23 23:02:18.243] Verifying certificate... [2025-09-23 23:02:18.467] Verified OK [2025-09-23 23:02:18.499] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:02:20.081] Verified OK [2025-09-23 23:02:20.097] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:02:20.747] Verified OK [2025-09-23 23:02:20.747] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:02:23.495] fs.protected_hardlinks = 1 [2025-09-23 23:02:23.495] fs.protected_symlinks = 1 [2025-09-23 23:02:23.495] kernel.modules_disabled = 1 [2025-09-23 23:02:23.670] [2025-09-23 23:02:23.670] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:02:24.871] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:02:32.611] SBL1:1210.0.1.0 [2025-09-23 23:02:32.643] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:02:34.227] SBL2:1210.0.1.0 [2025-09-23 23:02:34.259] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:02:34.370] j-A [2025-09-23 23:02:41.742] The R5 Autosar Classic is running [2025-09-23 23:02:41.742] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:02:41.742] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:02:42.349] INIT: version 2.96 booting [2025-09-23 23:02:42.461] INIT: Entering runlevel: 5 [2025-09-23 23:02:42.605] mtd24 attached [2025-09-23 23:02:42.621] mtd28 attached [2025-09-23 23:02:42.637] mtd32 attached [2025-09-23 23:02:42.669] ubi0:textures is mounted. [2025-09-23 23:02:42.685] RTNETLINK answers: File exists [2025-09-23 23:02:42.685] ubi1:animations is mounted. [2025-09-23 23:02:42.741] ubi2:dml_code is mounted. [2025-09-23 23:02:42.741] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:02:42.741] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:02:42.741] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:02:42.741] data.LB_FadeInType0=100 [2025-09-23 23:02:42.741] data.CHLH_FadeInType0=0 [2025-09-23 23:02:42.741] data.WU_FadeInDelay=0 [2025-09-23 23:02:42.741] max_time_out=0 [2025-09-23 23:02:42.741] No splash screen [2025-09-23 23:02:42.741] stop dss Done [2025-09-23 23:02:42.741] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:02:42.741] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:02:42.789] /dev/mem opened. [2025-09-23 23:02:42.789] Memory mapped at address 0xffff97d50000. [2025-09-23 23:02:42.815] Read at address 0x00600018 (0xffff97d50018): 0x00000000 [2025-09-23 23:02:42.815] Write at address 0x00600018 (0xffff97d50018): 0x00400040, readback 0x00400040 [2025-09-23 23:02:42.863] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:02:42.863] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:02:43.071] Loaded PowerVR consumer services. [2025-09-23 23:02:43.132] Waiting data available... [2025-09-23 23:02:43.132] 512+0 records in [2025-09-23 23:02:43.132] 512+0 records out [2025-09-23 23:02:43.164] Starting syslogd/klogd: done [2025-09-23 23:02:43.180] DML Start [2025-09-23 23:02:43.356] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:02:43.531] DML res1: 0 [2025-09-23 23:02:44.027] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:02:44.048] Read Success [2025-09-23 23:02:44.048] Verifying certificate... [2025-09-23 23:02:44.288] Verified OK [2025-09-23 23:02:44.320] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:02:46.014] Verified OK [2025-09-23 23:02:46.030] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:02:46.620] Verified OK [2025-09-23 23:02:46.620] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:02:49.131] fs.protected_hardlinks = 1 [2025-09-23 23:02:49.131] fs.protected_symlinks = 1 [2025-09-23 23:02:49.146] kernel.modules_disabled = 1 [2025-09-23 23:02:49.339] [2025-09-23 23:02:49.339] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:02:50.596] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:02:58.337] SBL1:1210.0.1.0 [2025-09-23 23:02:58.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:02:59.951] SBL2:1210.0.1.0 [2025-09-23 23:02:59.999] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:03:00.112] j-A [2025-09-23 23:03:07.450] The R5 Autosar Classic is running [2025-09-23 23:03:07.475] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:03:07.475] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:03:08.083] INIT: version 2.96 booting [2025-09-23 23:03:08.195] INIT: Entering runlevel: 5 [2025-09-23 23:03:08.356] mtd24 attached [2025-09-23 23:03:08.356] mtd32 attached [2025-09-23 23:03:08.372] mtd28 attached [2025-09-23 23:03:08.387] ubi0:textures is mounted. [2025-09-23 23:03:08.419] RTNETLINK answers: File exists [2025-09-23 23:03:08.459] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:03:08.459] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:03:08.459] ubi2:animations is mounted. [2025-09-23 23:03:08.459] ubi1:dml_code is mounted. [2025-09-23 23:03:08.459] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:03:08.459] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:03:08.459] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:03:08.488] data.LB_FadeInType0=100 [2025-09-23 23:03:08.488] data.CHLH_FadeInType0=0 [2025-09-23 23:03:08.488] data.WU_FadeInDelay=0 [2025-09-23 23:03:08.488] max_time_out=0 [2025-09-23 23:03:08.488] No splash screen [2025-09-23 23:03:08.488] stop dss Done [2025-09-23 23:03:08.520] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:03:08.560] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:03:08.560] /dev/mem opened. [2025-09-23 23:03:08.560] Memory mapped at address 0xffffaf069000. [2025-09-23 23:03:08.560] Read at address 0x00600018 (0xffffaf069018): 0x00000000 [2025-09-23 23:03:08.560] Write at address 0x00600018 (0xffffaf069018): 0x00400040, readback 0x00400040 [2025-09-23 23:03:08.705] Loaded PowerVR consumer services. [2025-09-23 23:03:08.817] Waiting data available... [2025-09-23 23:03:08.833] 512+0 records in [2025-09-23 23:03:08.848] 512+0 records out [2025-09-23 23:03:08.880] Starting syslogd/klogd: done [2025-09-23 23:03:08.897] DML Start [2025-09-23 23:03:09.088] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:03:09.329] DML res1: 0 [2025-09-23 23:03:09.754] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:03:09.754] Read Success [2025-09-23 23:03:09.754] Verifying certificate... [2025-09-23 23:03:10.025] Verified OK [2025-09-23 23:03:10.058] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:03:11.815] Verified OK [2025-09-23 23:03:11.815] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:03:12.256] Verified OK [2025-09-23 23:03:12.256] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:03:14.574] fs.protected_hardlinks = 1 [2025-09-23 23:03:14.590] fs.protected_symlinks = 1 [2025-09-23 23:03:14.590] kernel.modules_disabled = 1 [2025-09-23 23:03:14.798] [2025-09-23 23:03:14.798] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:03:16.411] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:03:24.090] SBL1:1210.0.1.0 [2025-09-23 23:03:24.138] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:03:25.705] SBL2:1210.0.1.0 [2025-09-23 23:03:25.753] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:03:25.865] j-A [2025-09-23 23:03:33.205] The R5 Autosar Classic is running [2025-09-23 23:03:33.230] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:03:33.230] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:03:33.838] INIT: version 2.96 booting [2025-09-23 23:03:33.949] INIT: Entering runlevel: 5 [2025-09-23 23:03:34.109] mtd24 attached [2025-09-23 23:03:34.109] mtd28 attached [2025-09-23 23:03:34.125] mtd32 attached [2025-09-23 23:03:34.173] RTNETLINK answers: File exists [2025-09-23 23:03:34.173] ubi0:textures is mounted. [2025-09-23 23:03:34.249] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:03:34.249] ubi1:animations is mounted. [2025-09-23 23:03:34.249] ubi2:dml_code is mounted. [2025-09-23 23:03:34.249] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:03:34.249] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:03:34.249] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:03:34.249] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:03:34.249] data.LB_FadeInType0=100 [2025-09-23 23:03:34.249] data.CHLH_FadeInType0=0 [2025-09-23 23:03:34.249] data.WU_FadeInDelay=0 [2025-09-23 23:03:34.249] max_time_out=0 [2025-09-23 23:03:34.249] No splash screen [2025-09-23 23:03:34.249] stop dss Done [2025-09-23 23:03:34.337] /dev/mem opened. [2025-09-23 23:03:34.337] Memory mapped at address 0xffff85840000. [2025-09-23 23:03:34.337] Read at address 0x00600018 (0xffff85840018): 0x00000000 [2025-09-23 23:03:34.337] Write at address 0x00600018 (0xffff85840018): 0x00400040, readback 0x00400040 [2025-09-23 23:03:34.337] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:03:34.337] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:03:34.561] Loaded PowerVR consumer services. [2025-09-23 23:03:34.632] Waiting data available... [2025-09-23 23:03:34.632] 512+0 records in [2025-09-23 23:03:34.632] 512+0 records out [2025-09-23 23:03:34.664] Starting syslogd/klogd: done [2025-09-23 23:03:34.679] DML Start [2025-09-23 23:03:34.871] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:03:35.112] DML res1: 0 [2025-09-23 23:03:35.447] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:03:35.463] Read Success [2025-09-23 23:03:35.463] Verifying certificate... [2025-09-23 23:03:35.703] Verified OK [2025-09-23 23:03:35.719] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:03:37.295] Verified OK [2025-09-23 23:03:37.295] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:03:37.896] Verified OK [2025-09-23 23:03:37.896] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:03:40.646] fs.protected_hardlinks = 1 [2025-09-23 23:03:40.646] fs.protected_symlinks = 1 [2025-09-23 23:03:40.662] kernel.modules_disabled = 1 [2025-09-23 23:03:40.853] [2025-09-23 23:03:40.853] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:03:42.173] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:03:49.843] SBL1:1210.0.1.0 [2025-09-23 23:03:49.875] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:03:51.457] SBL2:1210.0.1.0 [2025-09-23 23:03:51.505] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:03:51.601] j-A [2025-09-23 23:03:58.957] The R5 Autosar Classic is running [2025-09-23 23:03:58.957] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:03:58.978] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:03:59.585] INIT: version 2.96 booting [2025-09-23 23:03:59.698] INIT: Entering runlevel: 5 [2025-09-23 23:03:59.841] mtd24 attached [2025-09-23 23:03:59.857] mtd28 attached [2025-09-23 23:03:59.873] mtd32 attached [2025-09-23 23:03:59.952] ubi0:textures is mounted. [2025-09-23 23:03:59.952] ubi1:animations is mounted. [2025-09-23 23:03:59.952] RTNETLINK answers: File exists [2025-09-23 23:03:59.952] ubi2:dml_code is mounted. [2025-09-23 23:03:59.952] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:03:59.952] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:03:59.952] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:03:59.952] data.LB_FadeInType0=100 [2025-09-23 23:03:59.979] data.CHLH_FadeInType0=0 [2025-09-23 23:03:59.979] data.WU_FadeInDelay=0 [2025-09-23 23:03:59.979] max_time_out=0 [2025-09-23 23:03:59.979] No splash screen [2025-09-23 23:03:59.979] stop dss Done [2025-09-23 23:03:59.979] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:03:59.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:04:00.027] /dev/mem opened. [2025-09-23 23:04:00.059] Memory mapped at address 0xffffaec40000. [2025-09-23 23:04:00.059] Read at address 0x00600018 (0xffffaec40018): 0x00000000 [2025-09-23 23:04:00.059] Write at address 0x00600018 (0xffffaec40018): 0x00400040, readback 0x00400040 [2025-09-23 23:04:00.091] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:04:00.091] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:04:00.314] Loaded PowerVR consumer services. [2025-09-23 23:04:00.330] Waiting data available... [2025-09-23 23:04:00.346] 512+0 records in [2025-09-23 23:04:00.346] 512+0 records out [2025-09-23 23:04:00.394] Starting syslogd/klogd: done [2025-09-23 23:04:00.410] DML Start [2025-09-23 23:04:00.570] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:04:00.778] DML res1: 0 [2025-09-23 23:04:01.235] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:04:01.235] Read Success [2025-09-23 23:04:01.235] Verifying certificate... [2025-09-23 23:04:01.508] Verified OK [2025-09-23 23:04:01.524] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:04:03.219] Verified OK [2025-09-23 23:04:03.219] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:04:03.853] Verified OK [2025-09-23 23:04:03.853] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:04:06.427] fs.protected_hardlinks = 1 [2025-09-23 23:04:06.427] fs.protected_symlinks = 1 [2025-09-23 23:04:06.443] kernel.modules_disabled = 1 [2025-09-23 23:04:06.618] [2025-09-23 23:04:06.618] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:04:07.925] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:04:15.583] SBL1:1210.0.1.0 [2025-09-23 23:04:15.631] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:04:17.199] SBL2:1210.0.1.0 [2025-09-23 23:04:17.247] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:04:17.342] j-A [2025-09-23 23:04:24.698] The R5 Autosar Classic is running [2025-09-23 23:04:24.720] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:04:24.720] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:04:25.326] INIT: version 2.96 booting [2025-09-23 23:04:25.439] INIT: Entering runlevel: 5 [2025-09-23 23:04:25.599] mtd32 attached [2025-09-23 23:04:25.599] mtd28 attached [2025-09-23 23:04:25.615] mtd24 attached [2025-09-23 23:04:25.663] ubi0:dml_code is mounted. [2025-09-23 23:04:25.663] RTNETLINK answers: File exists [2025-09-23 23:04:25.709] ubi1:animations is mounted. [2025-09-23 23:04:25.709] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:04:25.709] ubi2:textures is mounted. [2025-09-23 23:04:25.709] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:04:25.709] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:04:25.709] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:04:25.709] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:04:25.731] data.LB_FadeInType0=100 [2025-09-23 23:04:25.731] data.CHLH_FadeInType0=0 [2025-09-23 23:04:25.731] data.WU_FadeInDelay=0 [2025-09-23 23:04:25.731] max_time_out=0 [2025-09-23 23:04:25.731] No splash screen [2025-09-23 23:04:25.731] stop dss Done [2025-09-23 23:04:25.779] /dev/mem opened. [2025-09-23 23:04:25.779] Memory mapped at address 0xffff869c8000. [2025-09-23 23:04:25.821] Read at address 0x00600018 (0xffff869c8018): 0x00000000 [2025-09-23 23:04:25.821] Write at address 0x00600018 (0xffff869c8018): 0x00400040, readback 0x00400040 [2025-09-23 23:04:25.821] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:04:25.821] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:04:25.981] Loaded PowerVR consumer services. [2025-09-23 23:04:26.076] Waiting data available... [2025-09-23 23:04:26.092] 512+0 records in [2025-09-23 23:04:26.092] 512+0 records out [2025-09-23 23:04:26.140] Starting syslogd/klogd: done [2025-09-23 23:04:26.156] DML Start [2025-09-23 23:04:26.316] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:04:26.556] DML res1: 0 [2025-09-23 23:04:26.997] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:04:26.997] Read Success [2025-09-23 23:04:26.997] Verifying certificate... [2025-09-23 23:04:27.221] Verified OK [2025-09-23 23:04:27.237] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:04:28.835] Verified OK [2025-09-23 23:04:28.835] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:04:29.490] Verified OK [2025-09-23 23:04:29.490] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:04:32.173] fs.protected_hardlinks = 1 [2025-09-23 23:04:32.173] fs.protected_symlinks = 1 [2025-09-23 23:04:32.173] kernel.modules_disabled = 1 [2025-09-23 23:04:32.348] [2025-09-23 23:04:32.348] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:04:33.626] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:04:41.332] SBL1:1210.0.1.0 [2025-09-23 23:04:41.380] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:04:42.947] SBL2:1210.0.1.0 [2025-09-23 23:04:42.995] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:04:43.090] j-A [2025-09-23 23:04:50.445] The R5 Autosar Classic is running [2025-09-23 23:04:50.445] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:04:50.466] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:04:51.074] INIT: version 2.96 booting [2025-09-23 23:04:51.185] INIT: Entering runlevel: 5 [2025-09-23 23:04:51.346] mtd32 attached [2025-09-23 23:04:51.346] mtd24 attached [2025-09-23 23:04:51.362] mtd28 attached [2025-09-23 23:04:51.410] RTNETLINK answers: File exists [2025-09-23 23:04:51.410] ubi1:textures is mounted. [2025-09-23 23:04:51.440] ubi0:dml_code is mounted. [2025-09-23 23:04:51.440] ubi2:animations is mounted. [2025-09-23 23:04:51.440] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:04:51.440] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:04:51.440] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:04:51.440] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:04:51.472] data.LB_FadeInType0=100 [2025-09-23 23:04:51.472] data.CHLH_FadeInType0=0 [2025-09-23 23:04:51.472] data.WU_FadeInDelay=0 [2025-09-23 23:04:51.472] max_time_out=0 [2025-09-23 23:04:51.472] No splash screen [2025-09-23 23:04:51.472] stop dss Done [2025-09-23 23:04:51.472] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:04:51.542] /dev/mem opened. [2025-09-23 23:04:51.542] Memory mapped at address 0xffffb5b56000. [2025-09-23 23:04:51.542] Read at address 0x00600018 (0xffffb5b56018): 0x00000000 [2025-09-23 23:04:51.542] Write at address 0x00600018 (0xffffb5b56018): 0x00400040, readback 0x00400040 [2025-09-23 23:04:51.542] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:04:51.558] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:04:51.718] Loaded PowerVR consumer services. [2025-09-23 23:04:51.814] Waiting data available... [2025-09-23 23:04:51.830] 512+0 records in [2025-09-23 23:04:51.830] 512+0 records out [2025-09-23 23:04:51.878] Starting syslogd/klogd: done [2025-09-23 23:04:51.894] DML Start [2025-09-23 23:04:52.037] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:04:52.293] DML res1: 0 [2025-09-23 23:04:52.755] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:04:52.755] Read Success [2025-09-23 23:04:52.755] Verifying certificate... [2025-09-23 23:04:53.010] Verified OK [2025-09-23 23:04:53.026] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:04:54.718] Verified OK [2025-09-23 23:04:54.718] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:04:55.351] Verified OK [2025-09-23 23:04:55.352] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:04:57.910] fs.protected_hardlinks = 1 [2025-09-23 23:04:57.926] fs.protected_symlinks = 1 [2025-09-23 23:04:57.926] kernel.modules_disabled = 1 [2025-09-23 23:04:58.133] [2025-09-23 23:04:58.133] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:04:59.368] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:05:07.074] SBL1:1210.0.1.0 [2025-09-23 23:05:07.121] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:05:08.688] SBL2:1210.0.1.0 [2025-09-23 23:05:08.736] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:05:08.848] j-A [2025-09-23 23:05:16.218] The R5 Autosar Classic is running [2025-09-23 23:05:16.218] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:05:16.218] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:05:16.825] INIT: version 2.96 booting [2025-09-23 23:05:16.937] INIT: Entering runlevel: 5 [2025-09-23 23:05:17.097] mtd28 attached [2025-09-23 23:05:17.114] mtd32 attached [2025-09-23 23:05:17.114] mtd24 attached [2025-09-23 23:05:17.162] RTNETLINK answers: File exists [2025-09-23 23:05:17.207] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:05:17.207] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:05:17.207] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:05:17.207] ubi0:animations is mounted. [2025-09-23 23:05:17.207] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:05:17.207] ubi1:dml_code is mounted. [2025-09-23 23:05:17.207] ubi2:textures is mounted. [2025-09-23 23:05:17.207] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:05:17.207] data.LB_FadeInType0=100 [2025-09-23 23:05:17.228] data.CHLH_FadeInType0=0 [2025-09-23 23:05:17.228] data.WU_FadeInDelay=0 [2025-09-23 23:05:17.228] max_time_out=0 [2025-09-23 23:05:17.228] No splash screen [2025-09-23 23:05:17.228] stop dss Done [2025-09-23 23:05:17.260] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:05:17.275] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:05:17.318] /dev/mem opened. [2025-09-23 23:05:17.318] Memory mapped at address 0xffff92b91000. [2025-09-23 23:05:17.318] Read at address 0x00600018 (0xffff92b91018): 0x00000000 [2025-09-23 23:05:17.318] Write at address 0x00600018 (0xffff92b91018): 0x00400040, readback 0x00400040 [2025-09-23 23:05:17.397] Loaded PowerVR consumer services. [2025-09-23 23:05:17.557] Waiting data available... [2025-09-23 23:05:17.573] 512+0 records in [2025-09-23 23:05:17.573] 512+0 records out [2025-09-23 23:05:17.621] Starting syslogd/klogd: done [2025-09-23 23:05:17.637] DML Start [2025-09-23 23:05:17.781] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:05:17.989] DML res1: 0 [2025-09-23 23:05:18.469] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:05:18.493] Read Success [2025-09-23 23:05:18.494] Verifying certificate... [2025-09-23 23:05:18.701] Verified OK [2025-09-23 23:05:18.718] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:05:20.380] Verified OK [2025-09-23 23:05:20.402] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:05:20.929] Verified OK [2025-09-23 23:05:20.929] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:05:23.424] fs.protected_hardlinks = 1 [2025-09-23 23:05:23.424] fs.protected_symlinks = 1 [2025-09-23 23:05:23.424] kernel.modules_disabled = 1 [2025-09-23 23:05:23.616] [2025-09-23 23:05:23.616] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:05:25.039] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:05:32.816] SBL1:1210.0.1.0 [2025-09-23 23:05:32.848] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:05:34.431] SBL2:1210.0.1.0 [2025-09-23 23:05:34.462] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:05:34.574] j-A [2025-09-23 23:05:41.947] The R5 Autosar Classic is running [2025-09-23 23:05:41.947] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:05:41.947] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:05:42.554] INIT: version 2.96 booting [2025-09-23 23:05:42.666] INIT: Entering runlevel: 5 [2025-09-23 23:05:42.826] mtd24 attached [2025-09-23 23:05:42.842] mtd28 attached [2025-09-23 23:05:42.842] mtd32 attached [2025-09-23 23:05:42.890] ubi0:textures is mounted. [2025-09-23 23:05:42.961] RTNETLINK answers: File exists [2025-09-23 23:05:42.961] ubi1:animations is mounted. [2025-09-23 23:05:42.961] ubi2:dml_code is mounted. [2025-09-23 23:05:42.961] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:05:42.961] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:05:42.961] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:05:42.961] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:05:42.961] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:05:42.961] data.LB_FadeInType0=100 [2025-09-23 23:05:42.961] data.CHLH_FadeInType0=0 [2025-09-23 23:05:42.961] data.WU_FadeInDelay=0 [2025-09-23 23:05:42.961] max_time_out=0 [2025-09-23 23:05:42.961] No splash screen [2025-09-23 23:05:42.961] stop dss Done [2025-09-23 23:05:43.029] /dev/mem opened. [2025-09-23 23:05:43.029] Memory mapped at address 0xffffa98d3000. [2025-09-23 23:05:43.029] Read at address 0x00600018 (0xffffa98d3018): 0x00000000 [2025-09-23 23:05:43.029] Write at address 0x00600018 (0xffffa98d3018): 0x00400040, readback 0x00400040 [2025-09-23 23:05:43.029] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:05:43.045] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:05:43.157] Loaded PowerVR consumer services. [2025-09-23 23:05:43.285] Waiting data available... [2025-09-23 23:05:43.301] 512+0 records in [2025-09-23 23:05:43.301] 512+0 records out [2025-09-23 23:05:43.349] Starting syslogd/klogd: done [2025-09-23 23:05:43.365] DML Start [2025-09-23 23:05:43.541] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:05:43.764] DML res1: 0 [2025-09-23 23:05:44.257] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:05:44.257] Read Success [2025-09-23 23:05:44.257] Verifying certificate... [2025-09-23 23:05:44.496] Verified OK [2025-09-23 23:05:44.512] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:05:46.220] Verified OK [2025-09-23 23:05:46.220] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:05:46.809] Verified OK [2025-09-23 23:05:46.809] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:05:49.399] fs.protected_hardlinks = 1 [2025-09-23 23:05:49.399] fs.protected_symlinks = 1 [2025-09-23 23:05:49.415] kernel.modules_disabled = 1 [2025-09-23 23:05:49.608] [2025-09-23 23:05:49.608] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:05:50.820] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:05:58.562] SBL1:1210.0.1.0 [2025-09-23 23:05:58.594] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:06:00.176] SBL2:1210.0.1.0 [2025-09-23 23:06:00.224] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:06:00.320] j-A [2025-09-23 23:06:07.675] The R5 Autosar Classic is running [2025-09-23 23:06:07.675] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:06:07.696] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:06:08.303] INIT: version 2.96 booting [2025-09-23 23:06:08.415] INIT: Entering runlevel: 5 [2025-09-23 23:06:08.574] mtd28 attached [2025-09-23 23:06:08.590] mtd32 attached [2025-09-23 23:06:08.590] mtd24 attached [2025-09-23 23:06:08.606] ubi0:animations is mounted. [2025-09-23 23:06:08.638] RTNETLINK answers: File exists [2025-09-23 23:06:08.700] ubi2:textures is mounted. [2025-09-23 23:06:08.700] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:06:08.700] ubi1:dml_code is mounted. [2025-09-23 23:06:08.700] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:06:08.700] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:06:08.700] data.LB_FadeInType0=100 [2025-09-23 23:06:08.700] data.CHLH_FadeInType0=0 [2025-09-23 23:06:08.700] data.WU_FadeInDelay=0 [2025-09-23 23:06:08.700] max_time_out=0 [2025-09-23 23:06:08.700] No splash screen [2025-09-23 23:06:08.700] stop dss Done [2025-09-23 23:06:08.700] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:06:08.700] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:06:08.771] /dev/mem opened. [2025-09-23 23:06:08.771] Memory mapped at address 0xffffb0185000. [2025-09-23 23:06:08.771] Read at address 0x00600018 (0xffffb0185018): 0x00000000 [2025-09-23 23:06:08.771] Write at address 0x00600018 (0xffffb0185018): 0x00400040, readback 0x00400040 [2025-09-23 23:06:08.829] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:06:08.829] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:06:09.004] Loaded PowerVR consumer services. [2025-09-23 23:06:09.036] Waiting data available... [2025-09-23 23:06:09.052] 512+0 records in [2025-09-23 23:06:09.052] 512+0 records out [2025-09-23 23:06:09.100] Starting syslogd/klogd: done [2025-09-23 23:06:09.116] DML Start [2025-09-23 23:06:09.292] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:06:09.532] DML res1: 0 [2025-09-23 23:06:09.943] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:06:09.943] Read Success [2025-09-23 23:06:09.943] Verifying certificate... [2025-09-23 23:06:10.183] Verified OK [2025-09-23 23:06:10.199] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:06:11.836] Verified OK [2025-09-23 23:06:11.836] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:06:12.517] Verified OK [2025-09-23 23:06:12.517] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:06:15.218] fs.protected_hardlinks = 1 [2025-09-23 23:06:15.235] fs.protected_symlinks = 1 [2025-09-23 23:06:15.235] kernel.modules_disabled = 1 [2025-09-23 23:06:15.426] [2025-09-23 23:06:15.426] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:06:16.609] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:06:24.300] SBL1:1210.0.1.0 [2025-09-23 23:06:24.332] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:06:25.914] SBL2:1210.0.1.0 [2025-09-23 23:06:25.946] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:06:26.059] j-A [2025-09-23 23:06:33.434] The R5 Autosar Classic is running [2025-09-23 23:06:33.434] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:06:33.434] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:06:34.041] INIT: version 2.96 booting [2025-09-23 23:06:34.153] INIT: Entering runlevel: 5 [2025-09-23 23:06:34.313] mtd28 attached [2025-09-23 23:06:34.313] mtd32 attached [2025-09-23 23:06:34.329] mtd24 attached [2025-09-23 23:06:34.377] ubi0:animations is mounted. [2025-09-23 23:06:34.448] RTNETLINK answers: File exists [2025-09-23 23:06:34.448] ubi1:dml_code is mounted. [2025-09-23 23:06:34.448] ubi2:textures is mounted. [2025-09-23 23:06:34.448] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:06:34.448] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:06:34.448] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:06:34.448] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:06:34.448] data.LB_FadeInType0=100 [2025-09-23 23:06:34.448] data.CHLH_FadeInType0=0 [2025-09-23 23:06:34.448] data.WU_FadeInDelay=0 [2025-09-23 23:06:34.448] max_time_out=0 [2025-09-23 23:06:34.448] No splash screen [2025-09-23 23:06:34.448] stop dss Done [2025-09-23 23:06:34.448] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:06:34.517] /dev/mem opened. [2025-09-23 23:06:34.517] Memory mapped at address 0xffff94c19000. [2025-09-23 23:06:34.517] Read at address 0x00600018 (0xffff94c19018): 0x00000000 [2025-09-23 23:06:34.517] Write at address 0x00600018 (0xffff94c19018): 0x00400040, readback 0x00400040 [2025-09-23 23:06:34.574] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:06:34.574] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:06:34.655] Loaded PowerVR consumer services. [2025-09-23 23:06:34.782] Waiting data available... [2025-09-23 23:06:34.798] 512+0 records in [2025-09-23 23:06:34.798] 512+0 records out [2025-09-23 23:06:34.830] Starting syslogd/klogd: done [2025-09-23 23:06:34.846] DML Start [2025-09-23 23:06:34.991] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:06:35.182] DML res1: 0 [2025-09-23 23:06:35.742] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:06:35.763] Read Success [2025-09-23 23:06:35.763] Verifying certificate... [2025-09-23 23:06:36.003] Verified OK [2025-09-23 23:06:36.018] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:06:37.873] Verified OK [2025-09-23 23:06:37.873] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:06:38.361] Verified OK [2025-09-23 23:06:38.361] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:06:40.696] fs.protected_hardlinks = 1 [2025-09-23 23:06:40.696] fs.protected_symlinks = 1 [2025-09-23 23:06:40.696] kernel.modules_disabled = 1 [2025-09-23 23:06:40.904] [2025-09-23 23:06:40.904] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:06:42.313] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:06:50.043] SBL1:1210.0.1.0 [2025-09-23 23:06:50.074] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:06:51.657] SBL2:1210.0.1.0 [2025-09-23 23:06:51.689] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:06:51.801] j-A [2025-09-23 23:06:59.177] The R5 Autosar Classic is running [2025-09-23 23:06:59.177] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:06:59.177] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:06:59.784] INIT: version 2.96 booting [2025-09-23 23:06:59.896] INIT: Entering runlevel: 5 [2025-09-23 23:07:00.056] mtd24 attached [2025-09-23 23:07:00.056] mtd28 attached [2025-09-23 23:07:00.072] mtd32 attached [2025-09-23 23:07:00.120] RTNETLINK answers: File exists [2025-09-23 23:07:00.167] ubi0:textures is mounted. [2025-09-23 23:07:00.167] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:07:00.167] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:07:00.167] ubi1:animations is mounted. [2025-09-23 23:07:00.167] ubi2:dml_code is mounted. [2025-09-23 23:07:00.167] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:07:00.167] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:07:00.167] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:07:00.167] data.LB_FadeInType0=100 [2025-09-23 23:07:00.188] data.CHLH_FadeInType0=0 [2025-09-23 23:07:00.188] data.WU_FadeInDelay=0 [2025-09-23 23:07:00.188] max_time_out=0 [2025-09-23 23:07:00.188] No splash screen [2025-09-23 23:07:00.188] stop dss Done [2025-09-23 23:07:00.204] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:07:00.204] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:07:00.259] /dev/mem opened. [2025-09-23 23:07:00.259] Memory mapped at address 0xffffac478000. [2025-09-23 23:07:00.259] Read at address 0x00600018 (0xffffac478018): 0x00000000 [2025-09-23 23:07:00.259] Write at address 0x00600018 (0xffffac478018): 0x00400040, readback 0x00400040 [2025-09-23 23:07:00.451] Loaded PowerVR consumer services. [2025-09-23 23:07:00.547] Waiting data available... [2025-09-23 23:07:00.563] 512+0 records in [2025-09-23 23:07:00.563] 512+0 records out [2025-09-23 23:07:00.594] Starting syslogd/klogd: done [2025-09-23 23:07:00.611] DML Start [2025-09-23 23:07:00.787] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:07:01.026] DML res1: 0 [2025-09-23 23:07:01.421] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:07:01.421] Read Success [2025-09-23 23:07:01.421] Verifying certificate... [2025-09-23 23:07:01.693] Verified OK [2025-09-23 23:07:01.708] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:07:03.335] Verified OK [2025-09-23 23:07:03.335] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:07:03.953] Verified OK [2025-09-23 23:07:03.953] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:07:06.511] fs.protected_hardlinks = 1 [2025-09-23 23:07:06.527] fs.protected_symlinks = 1 [2025-09-23 23:07:06.527] kernel.modules_disabled = 1 [2025-09-23 23:07:06.719] [2025-09-23 23:07:06.719] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:07:08.031] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:07:15.787] SBL1:1210.0.1.0 [2025-09-23 23:07:15.835] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:07:17.402] SBL2:1210.0.1.0 [2025-09-23 23:07:17.450] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:07:17.546] j-A [2025-09-23 23:07:24.902] The R5 Autosar Classic is running [2025-09-23 23:07:24.902] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:07:24.924] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:07:25.532] INIT: version 2.96 booting [2025-09-23 23:07:25.643] INIT: Entering runlevel: 5 [2025-09-23 23:07:25.804] mtd24 attached [2025-09-23 23:07:25.804] mtd28 attached [2025-09-23 23:07:25.835] mtd32 attached [2025-09-23 23:07:25.851] ubi0:textures is mounted. [2025-09-23 23:07:25.867] ubi1:animations is mounted. [2025-09-23 23:07:25.904] RTNETLINK answers: File exists [2025-09-23 23:07:25.904] ubi2:dml_code is mounted. [2025-09-23 23:07:25.904] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:07:25.904] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:07:25.904] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:07:25.904] data.LB_FadeInType0=100 [2025-09-23 23:07:25.940] data.CHLH_FadeInType0=0 [2025-09-23 23:07:25.940] data.WU_FadeInDelay=0 [2025-09-23 23:07:25.940] max_time_out=0 [2025-09-23 23:07:25.940] No splash screen [2025-09-23 23:07:25.940] stop dss Done [2025-09-23 23:07:25.940] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:07:25.940] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:07:25.972] /dev/mem opened. [2025-09-23 23:07:25.972] Memory mapped at address 0xffff8b525000. [2025-09-23 23:07:26.012] Read at address 0x00600018 (0xffff8b525018): 0x00000000 [2025-09-23 23:07:26.012] Write at address 0x00600018 (0xffff8b525018): 0x00400040, readback 0x00400040 [2025-09-23 23:07:26.012] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:07:26.012] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:07:26.172] Loaded PowerVR consumer services. [2025-09-23 23:07:26.312] Waiting data available... [2025-09-23 23:07:26.312] 512+0 records in [2025-09-23 23:07:26.312] 512+0 records out [2025-09-23 23:07:26.344] Starting syslogd/klogd: done [2025-09-23 23:07:26.360] DML Start [2025-09-23 23:07:26.551] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:07:26.776] DML res1: 0 [2025-09-23 23:07:27.169] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:07:27.169] Read Success [2025-09-23 23:07:27.169] Verifying certificate... [2025-09-23 23:07:27.409] Verified OK [2025-09-23 23:07:27.425] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:07:29.168] Verified OK [2025-09-23 23:07:29.168] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:07:29.702] Verified OK [2025-09-23 23:07:29.702] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:07:32.341] fs.protected_hardlinks = 1 [2025-09-23 23:07:32.341] fs.protected_symlinks = 1 [2025-09-23 23:07:32.356] kernel.modules_disabled = 1 [2025-09-23 23:07:32.532] [2025-09-23 23:07:32.532] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:07:33.869] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:07:36.118] SBL1:1210.0.1.0 [2025-09-23 23:07:41.588] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:07:43.170] SBL2:1210.0.1.0 [2025-09-23 23:07:43.202] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:07:43.314] j-A [2025-09-23 23:07:50.688] The R5 Autosar Classic is running [2025-09-23 23:07:50.688] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:07:50.688] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:07:51.295] INIT: version 2.96 booting [2025-09-23 23:07:51.407] INIT: Entering runlevel: 5 [2025-09-23 23:07:51.552] mtd28 attached [2025-09-23 23:07:51.568] mtd24 attached [2025-09-23 23:07:51.600] mtd32 attached [2025-09-23 23:07:51.615] ubi0:animations is mounted. [2025-09-23 23:07:51.615] ubi1:textures is mounted. [2025-09-23 23:07:51.631] RTNETLINK answers: File exists [2025-09-23 23:07:51.691] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:07:51.691] ubi2:dml_code is mounted. [2025-09-23 23:07:51.691] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:07:51.691] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:07:51.691] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:07:51.691] data.LB_FadeInType0=100 [2025-09-23 23:07:51.691] data.CHLH_FadeInType0=0 [2025-09-23 23:07:51.691] data.WU_FadeInDelay=0 [2025-09-23 23:07:51.691] max_time_out=0 [2025-09-23 23:07:51.691] No splash screen [2025-09-23 23:07:51.691] stop dss Done [2025-09-23 23:07:51.692] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:07:51.739] /dev/mem opened. [2025-09-23 23:07:51.739] Memory mapped at address 0xffffba054000. [2025-09-23 23:07:51.778] Read at address 0x00600018 (0xffffba054018): 0x00000000 [2025-09-23 23:07:51.778] Write at address 0x00600018 (0xffffba054018): 0x00400040, readback 0x00400040 [2025-09-23 23:07:51.778] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:07:51.778] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:07:52.018] Loaded PowerVR consumer services. [2025-09-23 23:07:52.034] Waiting data available... [2025-09-23 23:07:52.066] 512+0 records in [2025-09-23 23:07:52.066] 512+0 records out [2025-09-23 23:07:52.082] Starting syslogd/klogd: done [2025-09-23 23:07:52.114] DML Start [2025-09-23 23:07:52.274] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:07:52.482] DML res1: 0 [2025-09-23 23:07:52.941] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:07:52.941] Read Success [2025-09-23 23:07:52.941] Verifying certificate... [2025-09-23 23:07:53.196] Verified OK [2025-09-23 23:07:53.211] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:07:54.906] Verified OK [2025-09-23 23:07:54.906] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:07:55.425] Verified OK [2025-09-23 23:07:55.425] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:07:58.065] fs.protected_hardlinks = 1 [2025-09-23 23:07:58.081] fs.protected_symlinks = 1 [2025-09-23 23:07:58.081] kernel.modules_disabled = 1 [2025-09-23 23:07:58.272] [2025-09-23 23:07:58.272] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:07:59.556] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:08:07.287] SBL1:1210.0.1.0 [2025-09-23 23:08:07.335] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:08:08.903] SBL2:1210.0.1.0 [2025-09-23 23:08:08.950] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:08:09.046] j-A [2025-09-23 23:08:16.403] The R5 Autosar Classic is running [2025-09-23 23:08:16.403] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:08:16.424] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:08:17.031] INIT: version 2.96 booting [2025-09-23 23:08:17.143] INIT: Entering runlevel: 5 [2025-09-23 23:08:17.287] mtd24 attached [2025-09-23 23:08:17.303] mtd28 attached [2025-09-23 23:08:17.319] mtd32 attached [2025-09-23 23:08:17.401] RTNETLINK answers: File exists [2025-09-23 23:08:17.401] ubi1:animations is mounted. [2025-09-23 23:08:17.401] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:08:17.401] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:08:17.401] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:08:17.401] ubi0:textures is mounted. [2025-09-23 23:08:17.401] ubi2:dml_code is mounted. [2025-09-23 23:08:17.401] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:08:17.401] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:08:17.428] data.LB_FadeInType0=100 [2025-09-23 23:08:17.428] data.CHLH_FadeInType0=0 [2025-09-23 23:08:17.428] data.WU_FadeInDelay=0 [2025-09-23 23:08:17.428] max_time_out=0 [2025-09-23 23:08:17.428] No splash screen [2025-09-23 23:08:17.428] stop dss Done [2025-09-23 23:08:17.444] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:08:17.460] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:08:17.499] /dev/mem opened. [2025-09-23 23:08:17.499] Memory mapped at address 0xffffb6948000. [2025-09-23 23:08:17.499] Read at address 0x00600018 (0xffffb6948018): 0x00000000 [2025-09-23 23:08:17.499] Write at address 0x00600018 (0xffffb6948018): 0x00400040, readback 0x00400040 [2025-09-23 23:08:17.579] Loaded PowerVR consumer services. [2025-09-23 23:08:17.754] Waiting data available... [2025-09-23 23:08:17.787] 512+0 records in [2025-09-23 23:08:17.787] 512+0 records out [2025-09-23 23:08:17.803] Starting syslogd/klogd: done [2025-09-23 23:08:17.819] DML Start [2025-09-23 23:08:17.979] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:08:18.203] DML res1: 0 [2025-09-23 23:08:18.656] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:08:18.656] Read Success [2025-09-23 23:08:18.656] Verifying certificate... [2025-09-23 23:08:18.880] Verified OK [2025-09-23 23:08:18.880] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:08:20.599] Verified OK [2025-09-23 23:08:20.599] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:08:21.142] Verified OK [2025-09-23 23:08:21.163] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:08:23.626] fs.protected_hardlinks = 1 [2025-09-23 23:08:23.642] fs.protected_symlinks = 1 [2025-09-23 23:08:23.642] kernel.modules_disabled = 1 [2025-09-23 23:08:23.834] [2025-09-23 23:08:23.834] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:08:25.270] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:08:33.030] SBL1:1210.0.1.0 [2025-09-23 23:08:33.078] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:08:34.645] SBL2:1210.0.1.0 [2025-09-23 23:08:34.693] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:08:34.789] j-A [2025-09-23 23:08:42.145] The R5 Autosar Classic is running [2025-09-23 23:08:42.167] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:08:42.167] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:08:42.775] INIT: version 2.96 booting [2025-09-23 23:08:42.887] INIT: Entering runlevel: 5 [2025-09-23 23:08:43.047] mtd32 attached [2025-09-23 23:08:43.047] mtd24 attached [2025-09-23 23:08:43.063] mtd28 attached [2025-09-23 23:08:43.112] RTNETLINK answers: File exists [2025-09-23 23:08:43.112] ubi0:dml_code is mounted. [2025-09-23 23:08:43.171] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:08:43.171] ubi1:textures is mounted. [2025-09-23 23:08:43.171] ubi2:animations is mounted. [2025-09-23 23:08:43.171] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:08:43.171] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:08:43.171] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:08:43.171] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:08:43.171] data.LB_FadeInType0=100 [2025-09-23 23:08:43.171] data.CHLH_FadeInType0=0 [2025-09-23 23:08:43.171] data.WU_FadeInDelay=0 [2025-09-23 23:08:43.171] max_time_out=0 [2025-09-23 23:08:43.171] No splash screen [2025-09-23 23:08:43.171] stop dss Done [2025-09-23 23:08:43.218] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:08:43.252] /dev/mem opened. [2025-09-23 23:08:43.252] Memory mapped at address 0xffff85d17000. [2025-09-23 23:08:43.252] Read at address 0x00600018 (0xffff85d17018): 0x00000000 [2025-09-23 23:08:43.252] Write at address 0x00600018 (0xffff85d17018): 0x00400040, readback 0x00400040 [2025-09-23 23:08:43.252] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:08:43.412] Loaded PowerVR consumer services. [2025-09-23 23:08:43.508] Waiting data available... [2025-09-23 23:08:43.540] 512+0 records in [2025-09-23 23:08:43.540] 512+0 records out [2025-09-23 23:08:43.572] Starting syslogd/klogd: done [2025-09-23 23:08:43.588] DML Start [2025-09-23 23:08:43.748] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:08:43.988] DML res1: 0 [2025-09-23 23:08:44.435] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:08:44.451] Read Success [2025-09-23 23:08:44.451] Verifying certificate... [2025-09-23 23:08:44.692] Verified OK [2025-09-23 23:08:44.708] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:08:46.378] Verified OK [2025-09-23 23:08:46.378] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:08:47.027] Verified OK [2025-09-23 23:08:47.027] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:08:49.646] fs.protected_hardlinks = 1 [2025-09-23 23:08:49.646] fs.protected_symlinks = 1 [2025-09-23 23:08:49.646] kernel.modules_disabled = 1 [2025-09-23 23:08:49.838] [2025-09-23 23:08:49.838] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:08:51.019] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:08:58.794] SBL1:1210.0.1.0 [2025-09-23 23:08:58.842] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:09:00.408] SBL2:1210.0.1.0 [2025-09-23 23:09:00.457] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:09:00.569] j-A [2025-09-23 23:09:07.939] The R5 Autosar Classic is running [2025-09-23 23:09:07.939] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:09:07.939] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:09:08.547] INIT: version 2.96 booting [2025-09-23 23:09:08.658] INIT: Entering runlevel: 5 [2025-09-23 23:09:08.819] mtd28 attached [2025-09-23 23:09:08.819] mtd32 attached [2025-09-23 23:09:08.835] mtd24 attached [2025-09-23 23:09:08.867] ubi0:animations is mounted. [2025-09-23 23:09:08.883] ubi1:dml_code is mounted. [2025-09-23 23:09:08.883] RTNETLINK answers: File exists [2025-09-23 23:09:08.918] ubi2:textures is mounted. [2025-09-23 23:09:08.918] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:09:08.918] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:09:08.918] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:09:08.918] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:09:08.918] data.LB_FadeInType0=100 [2025-09-23 23:09:08.944] data.CHLH_FadeInType0=0 [2025-09-23 23:09:08.944] data.WU_FadeInDelay=0 [2025-09-23 23:09:08.944] max_time_out=0 [2025-09-23 23:09:08.944] No splash screen [2025-09-23 23:09:08.944] stop dss Done [2025-09-23 23:09:08.944] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:09:09.030] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:09:09.030] /dev/mem opened. [2025-09-23 23:09:09.030] Memory mapped at address 0xffff87a22000. [2025-09-23 23:09:09.030] Read at address 0x00600018 (0xffff87a22018): 0x00000000 [2025-09-23 23:09:09.030] Write at address 0x00600018 (0xffff87a22018): 0x00400040, readback 0x00400040 [2025-09-23 23:09:09.030] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:09:09.094] Loaded PowerVR consumer services. [2025-09-23 23:09:09.286] Waiting data available... [2025-09-23 23:09:09.286] 512+0 records in [2025-09-23 23:09:09.302] 512+0 records out [2025-09-23 23:09:09.334] Starting syslogd/klogd: done [2025-09-23 23:09:09.350] DML Start [2025-09-23 23:09:09.541] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:09:09.750] DML res1: 0 [2025-09-23 23:09:10.237] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:09:10.237] Read Success [2025-09-23 23:09:10.237] Verifying certificate... [2025-09-23 23:09:10.509] Verified OK [2025-09-23 23:09:10.524] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:09:12.276] Verified OK [2025-09-23 23:09:12.276] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:09:12.862] Verified OK [2025-09-23 23:09:12.862] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:09:15.405] fs.protected_hardlinks = 1 [2025-09-23 23:09:15.421] fs.protected_symlinks = 1 [2025-09-23 23:09:15.421] kernel.modules_disabled = 1 [2025-09-23 23:09:15.630] [2025-09-23 23:09:15.630] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:09:16.755] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:09:24.545] SBL1:1210.0.1.0 [2025-09-23 23:09:24.577] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:09:26.159] SBL2:1210.0.1.0 [2025-09-23 23:09:26.191] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:09:26.304] j-A [2025-09-23 23:09:33.659] The R5 Autosar Classic is running [2025-09-23 23:09:33.659] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:09:33.680] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:09:34.288] INIT: version 2.96 booting [2025-09-23 23:09:34.399] INIT: Entering runlevel: 5 [2025-09-23 23:09:34.543] mtd24 attached [2025-09-23 23:09:34.559] mtd28 attached [2025-09-23 23:09:34.575] mtd32 attached [2025-09-23 23:09:34.607] ubi0:textures is mounted. [2025-09-23 23:09:34.624] ubi1:animations is mounted. [2025-09-23 23:09:34.624] RTNETLINK answers: File exists [2025-09-23 23:09:34.682] ubi2:dml_code is mounted. [2025-09-23 23:09:34.682] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:09:34.682] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:09:34.682] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:09:34.682] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:09:34.682] data.LB_FadeInType0=100 [2025-09-23 23:09:34.682] data.CHLH_FadeInType0=0 [2025-09-23 23:09:34.682] data.WU_FadeInDelay=0 [2025-09-23 23:09:34.682] max_time_out=0 [2025-09-23 23:09:34.682] No splash screen [2025-09-23 23:09:34.682] stop dss Done [2025-09-23 23:09:34.682] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:09:34.760] /dev/mem opened. [2025-09-23 23:09:34.760] Memory mapped at address 0xffff82f4a000. [2025-09-23 23:09:34.760] Read at address 0x00600018 (0xffff82f4a018): 0x00000000 [2025-09-23 23:09:34.760] Write at address 0x00600018 (0xffff82f4a018): 0x00400040, readback 0x00400040 [2025-09-23 23:09:34.760] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:09:34.760] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:09:35.041] Loaded PowerVR consumer services. [2025-09-23 23:09:35.041] Waiting data available... [2025-09-23 23:09:35.078] 512+0 records in [2025-09-23 23:09:35.078] 512+0 records out [2025-09-23 23:09:35.122] Starting syslogd/klogd: done [2025-09-23 23:09:35.138] DML Start [2025-09-23 23:09:35.266] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:09:35.490] DML res1: 0 [2025-09-23 23:09:36.013] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:09:36.014] Read Success [2025-09-23 23:09:36.014] Verifying certificate... [2025-09-23 23:09:36.285] Verified OK [2025-09-23 23:09:36.301] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:09:38.029] Verified OK [2025-09-23 23:09:38.029] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:09:38.444] Verified OK [2025-09-23 23:09:38.444] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:09:40.779] fs.protected_hardlinks = 1 [2025-09-23 23:09:40.779] fs.protected_symlinks = 1 [2025-09-23 23:09:40.795] kernel.modules_disabled = 1 [2025-09-23 23:09:40.987] [2025-09-23 23:09:40.987] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:09:42.633] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:09:50.286] SBL1:1210.0.1.0 [2025-09-23 23:09:50.334] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:09:51.900] SBL2:1210.0.1.0 [2025-09-23 23:09:51.948] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:09:52.044] j-A [2025-09-23 23:09:59.399] The R5 Autosar Classic is running [2025-09-23 23:09:59.422] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:09:59.422] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:10:00.029] INIT: version 2.96 booting [2025-09-23 23:10:00.141] INIT: Entering runlevel: 5 [2025-09-23 23:10:00.302] mtd28 attached [2025-09-23 23:10:00.302] mtd24 attached [2025-09-23 23:10:00.317] mtd32 attached [2025-09-23 23:10:00.365] ubi0:animations is mounted. [2025-09-23 23:10:00.365] RTNETLINK answers: File exists [2025-09-23 23:10:00.407] ubi1:textures is mounted. [2025-09-23 23:10:00.407] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:10:00.407] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:10:00.407] ubi2:dml_code is mounted. [2025-09-23 23:10:00.407] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:10:00.407] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:10:00.407] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:10:00.429] data.LB_FadeInType0=100 [2025-09-23 23:10:00.429] data.CHLH_FadeInType0=0 [2025-09-23 23:10:00.429] data.WU_FadeInDelay=0 [2025-09-23 23:10:00.429] max_time_out=0 [2025-09-23 23:10:00.429] No splash screen [2025-09-23 23:10:00.429] stop dss Done [2025-09-23 23:10:00.474] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:10:00.474] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:10:00.474] /dev/mem opened. [2025-09-23 23:10:00.506] Memory mapped at address 0xffffa482f000. [2025-09-23 23:10:00.506] Read at address 0x00600018 (0xffffa482f018): 0x00000000 [2025-09-23 23:10:00.506] Write at address 0x00600018 (0xffffa482f018): 0x00400040, readback 0x00400040 [2025-09-23 23:10:00.745] Loaded PowerVR consumer services. [2025-09-23 23:10:00.761] Waiting data available... [2025-09-23 23:10:00.794] 512+0 records in [2025-09-23 23:10:00.794] 512+0 records out [2025-09-23 23:10:00.841] Starting syslogd/klogd: done [2025-09-23 23:10:00.857] DML Start [2025-09-23 23:10:01.033] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:10:01.257] DML res1: 0 [2025-09-23 23:10:01.747] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:10:01.747] Read Success [2025-09-23 23:10:01.747] Verifying certificate... [2025-09-23 23:10:01.986] Verified OK [2025-09-23 23:10:01.986] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:10:03.569] Verified OK [2025-09-23 23:10:03.569] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:10:04.139] Verified OK [2025-09-23 23:10:04.139] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:10:06.858] fs.protected_hardlinks = 1 [2025-09-23 23:10:06.858] fs.protected_symlinks = 1 [2025-09-23 23:10:06.874] kernel.modules_disabled = 1 [2025-09-23 23:10:07.065] [2025-09-23 23:10:07.065] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:10:08.300] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:10:16.034] SBL1:1210.0.1.0 [2025-09-23 23:10:16.083] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:10:17.649] SBL2:1210.0.1.0 [2025-09-23 23:10:17.697] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:10:17.809] j-A [2025-09-23 23:10:25.148] The R5 Autosar Classic is running [2025-09-23 23:10:25.179] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:10:25.179] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:10:25.788] INIT: version 2.96 booting [2025-09-23 23:10:25.899] INIT: Entering runlevel: 5 [2025-09-23 23:10:26.043] mtd24 attached [2025-09-23 23:10:26.059] mtd32 attached [2025-09-23 23:10:26.075] mtd28 attached [2025-09-23 23:10:26.091] ubi0:textures is mounted. [2025-09-23 23:10:26.123] RTNETLINK answers: File exists [2025-09-23 23:10:26.177] ubi2:animations is mounted. [2025-09-23 23:10:26.177] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:10:26.177] ubi1:dml_code is mounted. [2025-09-23 23:10:26.177] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:10:26.177] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:10:26.177] data.LB_FadeInType0=100 [2025-09-23 23:10:26.177] data.CHLH_FadeInType0=0 [2025-09-23 23:10:26.177] data.WU_FadeInDelay=0 [2025-09-23 23:10:26.177] max_time_out=0 [2025-09-23 23:10:26.177] No splash screen [2025-09-23 23:10:26.177] stop dss Done [2025-09-23 23:10:26.177] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:10:26.177] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:10:26.258] /dev/mem opened. [2025-09-23 23:10:26.258] Memory mapped at address 0xffffa229c000. [2025-09-23 23:10:26.258] Read at address 0x00600018 (0xffffa229c018): 0x00000000 [2025-09-23 23:10:26.258] Write at address 0x00600018 (0xffffa229c018): 0x00400040, readback 0x00400040 [2025-09-23 23:10:26.258] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:10:26.258] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:10:26.354] Loaded PowerVR consumer services. [2025-09-23 23:10:26.530] Waiting data available... [2025-09-23 23:10:26.545] 512+0 records in [2025-09-23 23:10:26.545] 512+0 records out [2025-09-23 23:10:26.561] Starting syslogd/klogd: done [2025-09-23 23:10:26.593] DML Start [2025-09-23 23:10:26.754] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:10:26.962] DML res1: 0 [2025-09-23 23:10:27.387] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:10:27.387] Read Success [2025-09-23 23:10:27.387] Verifying certificate... [2025-09-23 23:10:27.610] Verified OK [2025-09-23 23:10:27.626] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:10:29.369] Verified OK [2025-09-23 23:10:29.369] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:10:29.929] Verified OK [2025-09-23 23:10:29.929] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:10:32.455] fs.protected_hardlinks = 1 [2025-09-23 23:10:32.455] fs.protected_symlinks = 1 [2025-09-23 23:10:32.471] kernel.modules_disabled = 1 [2025-09-23 23:10:32.647] [2025-09-23 23:10:32.647] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:10:34.032] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:10:41.789] SBL1:1210.0.1.0 [2025-09-23 23:10:41.821] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:10:43.404] SBL2:1210.0.1.0 [2025-09-23 23:10:43.436] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:10:43.547] j-A [2025-09-23 23:10:50.904] The R5 Autosar Classic is running [2025-09-23 23:10:50.904] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:10:50.925] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:10:51.532] INIT: version 2.96 booting [2025-09-23 23:10:51.644] INIT: Entering runlevel: 5 [2025-09-23 23:10:51.804] mtd32 attached [2025-09-23 23:10:51.804] mtd28 attached [2025-09-23 23:10:51.820] mtd24 attached [2025-09-23 23:10:51.867] RTNETLINK answers: File exists [2025-09-23 23:10:51.867] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:10:51.910] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:10:51.910] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:10:51.910] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:10:51.910] ubi0:dml_code is mounted. [2025-09-23 23:10:51.910] ubi1:animations is mounted. [2025-09-23 23:10:51.910] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:10:51.910] ubi2:textures is mounted. [2025-09-23 23:10:51.910] data.LB_FadeInType0=100 [2025-09-23 23:10:51.931] data.CHLH_FadeInType0=0 [2025-09-23 23:10:51.931] data.WU_FadeInDelay=0 [2025-09-23 23:10:51.931] max_time_out=0 [2025-09-23 23:10:51.931] No splash screen [2025-09-23 23:10:51.931] stop dss Done [2025-09-23 23:10:51.958] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:10:51.958] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:10:52.008] /dev/mem opened. [2025-09-23 23:10:52.008] Memory mapped at address 0xffffadbde000. [2025-09-23 23:10:52.008] Read at address 0x00600018 (0xffffadbde018): 0x00000000 [2025-09-23 23:10:52.008] Write at address 0x00600018 (0xffffadbde018): 0x00400040, readback 0x00400040 [2025-09-23 23:10:52.072] Loaded PowerVR consumer services. [2025-09-23 23:10:52.279] Waiting data available... [2025-09-23 23:10:52.295] 512+0 records in [2025-09-23 23:10:52.295] 512+0 records out [2025-09-23 23:10:52.343] Starting syslogd/klogd: done [2025-09-23 23:10:52.360] DML Start [2025-09-23 23:10:52.551] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:10:52.759] DML res1: 0 [2025-09-23 23:10:53.185] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:10:53.185] Read Success [2025-09-23 23:10:53.185] Verifying certificate... [2025-09-23 23:10:53.409] Verified OK [2025-09-23 23:10:53.425] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:10:55.109] Verified OK [2025-09-23 23:10:55.109] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:10:55.796] Verified OK [2025-09-23 23:10:55.796] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:10:58.418] fs.protected_hardlinks = 1 [2025-09-23 23:10:58.418] fs.protected_symlinks = 1 [2025-09-23 23:10:58.434] kernel.modules_disabled = 1 [2025-09-23 23:10:58.626] [2025-09-23 23:10:58.626] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:10:59.844] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:11:07.541] SBL1:1210.0.1.0 [2025-09-23 23:11:07.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:11:09.156] SBL2:1210.0.1.0 [2025-09-23 23:11:09.204] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:11:09.316] j-A [2025-09-23 23:11:16.657] The R5 Autosar Classic is running [2025-09-23 23:11:16.688] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:11:16.688] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:11:17.295] INIT: version 2.96 booting [2025-09-23 23:11:17.407] INIT: Entering runlevel: 5 [2025-09-23 23:11:17.567] mtd28 attached [2025-09-23 23:11:17.568] mtd32 attached [2025-09-23 23:11:17.583] mtd24 attached [2025-09-23 23:11:17.615] ubi0:animations is mounted. [2025-09-23 23:11:17.631] RTNETLINK answers: File exists [2025-09-23 23:11:17.690] ubi1:dml_code is mounted. [2025-09-23 23:11:17.690] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:11:17.690] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:11:17.690] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:11:17.690] ubi2:textures is mounted. [2025-09-23 23:11:17.690] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:11:17.690] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:11:17.690] data.LB_FadeInType0=100 [2025-09-23 23:11:17.690] data.CHLH_FadeInType0=0 [2025-09-23 23:11:17.690] data.WU_FadeInDelay=0 [2025-09-23 23:11:17.690] max_time_out=0 [2025-09-23 23:11:17.690] No splash screen [2025-09-23 23:11:17.690] stop dss Done [2025-09-23 23:11:17.737] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:11:17.772] /dev/mem opened. [2025-09-23 23:11:17.772] Memory mapped at address 0xffff89868000. [2025-09-23 23:11:17.772] Read at address 0x00600018 (0xffff89868018): 0x00000000 [2025-09-23 23:11:17.772] Write at address 0x00600018 (0xffff89868018): 0x00400040, readback 0x00400040 [2025-09-23 23:11:17.772] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:11:17.883] Loaded PowerVR consumer services. [2025-09-23 23:11:18.044] Waiting data available... [2025-09-23 23:11:18.044] 512+0 records in [2025-09-23 23:11:18.060] 512+0 records out [2025-09-23 23:11:18.076] Starting syslogd/klogd: done [2025-09-23 23:11:18.092] DML Start [2025-09-23 23:11:18.300] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:11:18.540] DML res1: 0 [2025-09-23 23:11:18.875] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:11:18.891] Read Success [2025-09-23 23:11:18.891] Verifying certificate... [2025-09-23 23:11:19.147] Verified OK [2025-09-23 23:11:19.163] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:11:20.938] Verified OK [2025-09-23 23:11:20.938] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:11:21.418] Verified OK [2025-09-23 23:11:21.418] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:11:23.896] fs.protected_hardlinks = 1 [2025-09-23 23:11:23.896] fs.protected_symlinks = 1 [2025-09-23 23:11:23.912] kernel.modules_disabled = 1 [2025-09-23 23:11:24.104] [2025-09-23 23:11:24.104] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:11:25.621] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:11:33.310] SBL1:1210.0.1.0 [2025-09-23 23:11:33.342] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:11:34.924] SBL2:1210.0.1.0 [2025-09-23 23:11:34.956] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:11:35.068] j-A [2025-09-23 23:11:42.441] The R5 Autosar Classic is running [2025-09-23 23:11:42.441] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:11:42.441] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:11:43.049] INIT: version 2.96 booting [2025-09-23 23:11:43.161] INIT: Entering runlevel: 5 [2025-09-23 23:11:43.305] mtd28 attached [2025-09-23 23:11:43.321] mtd24 attached [2025-09-23 23:11:43.337] mtd32 attached [2025-09-23 23:11:43.353] ubi0:animations is mounted. [2025-09-23 23:11:43.385] RTNETLINK answers: File exists [2025-09-23 23:11:43.385] ubi1:textures is mounted. [2025-09-23 23:11:43.441] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:11:43.441] ubi2:dml_code is mounted. [2025-09-23 23:11:43.441] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:11:43.441] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:11:43.441] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:11:43.441] data.LB_FadeInType0=100 [2025-09-23 23:11:43.441] data.CHLH_FadeInType0=0 [2025-09-23 23:11:43.441] data.WU_FadeInDelay=0 [2025-09-23 23:11:43.441] max_time_out=0 [2025-09-23 23:11:43.441] No splash screen [2025-09-23 23:11:43.441] stop dss Done [2025-09-23 23:11:43.441] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:11:43.529] /dev/mem opened. [2025-09-23 23:11:43.529] Memory mapped at address 0xffff9adca000. [2025-09-23 23:11:43.529] Read at address 0x00600018 (0xffff9adca018): 0x00000000 [2025-09-23 23:11:43.529] Write at address 0x00600018 (0xffff9adca018): 0x00400040, readback 0x00400040 [2025-09-23 23:11:43.529] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:11:43.529] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:11:43.626] Loaded PowerVR consumer services. [2025-09-23 23:11:43.785] Waiting data available... [2025-09-23 23:11:43.801] 512+0 records in [2025-09-23 23:11:43.801] 512+0 records out [2025-09-23 23:11:43.833] Starting syslogd/klogd: done [2025-09-23 23:11:43.865] DML Start [2025-09-23 23:11:44.041] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:11:44.281] DML res1: 0 [2025-09-23 23:11:44.722] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:11:44.722] Read Success [2025-09-23 23:11:44.722] Verifying certificate... [2025-09-23 23:11:44.978] Verified OK [2025-09-23 23:11:44.994] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:11:46.631] Verified OK [2025-09-23 23:11:46.631] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:11:47.314] Verified OK [2025-09-23 23:11:47.314] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:11:49.952] fs.protected_hardlinks = 1 [2025-09-23 23:11:49.968] fs.protected_symlinks = 1 [2025-09-23 23:11:49.968] kernel.modules_disabled = 1 [2025-09-23 23:11:50.160] [2025-09-23 23:11:50.160] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:11:51.356] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:11:59.081] SBL1:1210.0.1.0 [2025-09-23 23:11:59.113] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:12:00.697] SBL2:1210.0.1.0 [2025-09-23 23:12:00.729] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:12:00.840] j-A [2025-09-23 23:12:08.216] The R5 Autosar Classic is running [2025-09-23 23:12:08.216] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:12:08.216] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:12:08.824] INIT: version 2.96 booting [2025-09-23 23:12:08.920] INIT: Entering runlevel: 5 [2025-09-23 23:12:09.079] mtd24 attached [2025-09-23 23:12:09.095] mtd32 attached [2025-09-23 23:12:09.111] mtd28 attached [2025-09-23 23:12:09.216] ubi1:dml_code is mounted. [2025-09-23 23:12:09.216] RTNETLINK answers: File exists [2025-09-23 23:12:09.216] ubi0:textures is mounted. [2025-09-23 23:12:09.216] ubi2:animations is mounted. [2025-09-23 23:12:09.216] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:12:09.216] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:12:09.216] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:12:09.216] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:12:09.216] data.LB_FadeInType0=100 [2025-09-23 23:12:09.216] data.CHLH_FadeInType0=0 [2025-09-23 23:12:09.216] data.WU_FadeInDelay=0 [2025-09-23 23:12:09.216] max_time_out=0 [2025-09-23 23:12:09.216] No splash screen [2025-09-23 23:12:09.216] stop dss Done [2025-09-23 23:12:09.216] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:12:09.286] /dev/mem opened. [2025-09-23 23:12:09.286] Memory mapped at address 0xffff96ba1000. [2025-09-23 23:12:09.286] Read at address 0x00600018 (0xffff96ba1018): 0x00000000 [2025-09-23 23:12:09.286] Write at address 0x00600018 (0xffff96ba1018): 0x00400040, readback 0x00400040 [2025-09-23 23:12:09.318] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:12:09.334] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:12:09.542] Waiting data available... [2025-09-23 23:12:09.558] Loaded PowerVR consumer services. [2025-09-23 23:12:09.590] 512+0 records in [2025-09-23 23:12:09.590] 512+0 records out [2025-09-23 23:12:09.638] Starting syslogd/klogd: done [2025-09-23 23:12:10.235] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:12:10.235] Read Success [2025-09-23 23:12:10.235] Verifying certificate... [2025-09-23 23:12:10.459] Verified OK [2025-09-23 23:12:10.475] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:12:11.428] Verified OK [2025-09-23 23:12:11.428] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:12:11.884] Verified OK [2025-09-23 23:12:11.884] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:12:14.809] fs.protected_hardlinks = 1 [2025-09-23 23:12:14.809] fs.protected_symlinks = 1 [2025-09-23 23:12:14.809] kernel.modules_disabled = 1 [2025-09-23 23:12:14.968] [2025-09-23 23:12:14.968] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:12:17.548] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:12:24.807] SBL1:1210.0.1.0 [2025-09-23 23:12:24.839] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:12:26.423] SBL2:1210.0.1.0 [2025-09-23 23:12:26.454] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:12:26.567] j-A [2025-09-23 23:12:33.943] The R5 Autosar Classic is running [2025-09-23 23:12:33.943] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:12:33.943] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:12:34.551] INIT: version 2.96 booting [2025-09-23 23:12:34.663] INIT: Entering runlevel: 5 [2025-09-23 23:12:34.823] mtd28 attached [2025-09-23 23:12:34.823] mtd24 attached [2025-09-23 23:12:34.839] mtd32 attached [2025-09-23 23:12:34.887] ubi0:animations is mounted. [2025-09-23 23:12:34.887] RTNETLINK answers: File exists [2025-09-23 23:12:34.951] ubi1:textures is mounted. [2025-09-23 23:12:34.951] ubi2:dml_code is mounted. [2025-09-23 23:12:34.951] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:12:34.951] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:12:34.951] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:12:34.951] data.LB_FadeInType0=100 [2025-09-23 23:12:34.951] data.CHLH_FadeInType0=0 [2025-09-23 23:12:34.951] data.WU_FadeInDelay=0 [2025-09-23 23:12:34.951] max_time_out=0 [2025-09-23 23:12:34.951] No splash screen [2025-09-23 23:12:34.951] stop dss Done [2025-09-23 23:12:34.951] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:12:34.951] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:12:34.982] /dev/mem opened. [2025-09-23 23:12:35.008] Memory mapped at address 0xffff93fdb000. [2025-09-23 23:12:35.008] Read at address 0x00600018 (0xffff93fdb018): 0x00000000 [2025-09-23 23:12:35.008] Write at address 0x00600018 (0xffff93fdb018): 0x00400040, readback 0x00400040 [2025-09-23 23:12:35.024] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:12:35.041] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:12:35.217] Loaded PowerVR consumer services. [2025-09-23 23:12:35.296] Waiting data available... [2025-09-23 23:12:35.312] 512+0 records in [2025-09-23 23:12:35.329] 512+0 records out [2025-09-23 23:12:35.345] Starting syslogd/klogd: done [2025-09-23 23:12:35.361] DML Start [2025-09-23 23:12:35.520] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:12:35.713] DML res1: 0 [2025-09-23 23:12:36.205] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:12:36.205] Read Success [2025-09-23 23:12:36.205] Verifying certificate... [2025-09-23 23:12:36.493] Verified OK [2025-09-23 23:12:36.509] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:12:38.039] Verified OK [2025-09-23 23:12:38.039] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:12:38.615] Verified OK [2025-09-23 23:12:38.615] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:12:41.414] fs.protected_hardlinks = 1 [2025-09-23 23:12:41.414] fs.protected_symlinks = 1 [2025-09-23 23:12:41.430] kernel.modules_disabled = 1 [2025-09-23 23:12:41.621] [2025-09-23 23:12:41.621] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:12:42.798] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:12:50.558] SBL1:1210.0.1.0 [2025-09-23 23:12:50.606] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:12:52.172] SBL2:1210.0.1.0 [2025-09-23 23:12:52.220] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:12:52.332] j-A [2025-09-23 23:12:59.673] The R5 Autosar Classic is running [2025-09-23 23:12:59.703] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:12:59.703] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:13:00.311] INIT: version 2.96 booting [2025-09-23 23:13:00.407] INIT: Entering runlevel: 5 [2025-09-23 23:13:00.567] mtd24 attached [2025-09-23 23:13:00.582] mtd28 attached [2025-09-23 23:13:00.582] mtd32 attached [2025-09-23 23:13:00.698] ubi0:textures is mounted. [2025-09-23 23:13:00.698] ubi1:animations is mounted. [2025-09-23 23:13:00.698] RTNETLINK answers: File exists [2025-09-23 23:13:00.698] ubi2:dml_code is mounted. [2025-09-23 23:13:00.698] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:13:00.698] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:13:00.698] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:13:00.698] data.LB_FadeInType0=100 [2025-09-23 23:13:00.698] data.CHLH_FadeInType0=0 [2025-09-23 23:13:00.698] data.WU_FadeInDelay=0 [2025-09-23 23:13:00.698] max_time_out=0 [2025-09-23 23:13:00.698] No splash screen [2025-09-23 23:13:00.698] stop dss Done [2025-09-23 23:13:00.698] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:13:00.698] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:13:00.765] /dev/mem opened. [2025-09-23 23:13:00.765] Memory mapped at address 0xffff95424000. [2025-09-23 23:13:00.765] Read at address 0x00600018 (0xffff95424018): 0x00000000 [2025-09-23 23:13:00.765] Write at address 0x00600018 (0xffff95424018): 0x00400040, readback 0x00400040 [2025-09-23 23:13:00.781] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:13:00.813] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:13:00.908] Loaded PowerVR consumer services. [2025-09-23 23:13:01.053] Waiting data available... [2025-09-23 23:13:01.053] 512+0 records in [2025-09-23 23:13:01.069] 512+0 records out [2025-09-23 23:13:01.117] Starting syslogd/klogd: done [2025-09-23 23:13:01.117] DML Start [2025-09-23 23:13:01.325] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:13:01.580] DML res1: 0 [2025-09-23 23:13:01.959] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:13:01.959] Read Success [2025-09-23 23:13:01.959] Verifying certificate... [2025-09-23 23:13:02.231] Verified OK [2025-09-23 23:13:02.247] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:13:03.903] Verified OK [2025-09-23 23:13:03.903] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:13:04.500] Verified OK [2025-09-23 23:13:04.500] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:13:07.139] fs.protected_hardlinks = 1 [2025-09-23 23:13:07.139] fs.protected_symlinks = 1 [2025-09-23 23:13:07.155] kernel.modules_disabled = 1 [2025-09-23 23:13:07.347] [2025-09-23 23:13:07.347] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:13:08.626] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:13:16.323] SBL1:1210.0.1.0 [2025-09-23 23:13:16.355] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:13:17.939] SBL2:1210.0.1.0 [2025-09-23 23:13:17.971] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:13:18.083] j-A [2025-09-23 23:13:25.457] The R5 Autosar Classic is running [2025-09-23 23:13:25.457] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:13:25.457] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:13:26.064] INIT: version 2.96 booting [2025-09-23 23:13:26.176] INIT: Entering runlevel: 5 [2025-09-23 23:13:26.337] mtd28 attached [2025-09-23 23:13:26.337] mtd24 attached [2025-09-23 23:13:26.353] mtd32 attached [2025-09-23 23:13:26.439] ubi0:animations is mounted. [2025-09-23 23:13:26.439] ubi1:textures is mounted. [2025-09-23 23:13:26.439] RTNETLINK answers: File exists [2025-09-23 23:13:26.439] ubi2:dml_code is mounted. [2025-09-23 23:13:26.439] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:13:26.439] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:13:26.439] data.LB_FadeInType0=100 [2025-09-23 23:13:26.439] data.CHLH_FadeInType0=0 [2025-09-23 23:13:26.470] data.WU_FadeInDelay=0 [2025-09-23 23:13:26.470] max_time_out=0 [2025-09-23 23:13:26.470] No splash screen [2025-09-23 23:13:26.470] stop dss Done [2025-09-23 23:13:26.470] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:13:26.470] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:13:26.470] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:13:26.502] /dev/mem opened. [2025-09-23 23:13:26.502] Memory mapped at address 0xffff9209f000. [2025-09-23 23:13:26.528] Read at address 0x00600018 (0xffff9209f018): 0x00000000 [2025-09-23 23:13:26.528] Write at address 0x00600018 (0xffff9209f018): 0x00400040, readback 0x00400040 [2025-09-23 23:13:26.573] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:13:26.573] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:13:26.670] Loaded PowerVR consumer services. [2025-09-23 23:13:26.798] Waiting data available... [2025-09-23 23:13:26.814] 512+0 records in [2025-09-23 23:13:26.814] 512+0 records out [2025-09-23 23:13:26.846] Starting syslogd/klogd: done [2025-09-23 23:13:26.861] DML Start [2025-09-23 23:13:27.005] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:13:27.213] DML res1: 0 [2025-09-23 23:13:27.720] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:13:27.720] Read Success [2025-09-23 23:13:27.720] Verifying certificate... [2025-09-23 23:13:27.992] Verified OK [2025-09-23 23:13:28.024] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:13:29.783] Verified OK [2025-09-23 23:13:29.783] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:13:30.352] Verified OK [2025-09-23 23:13:30.352] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:13:32.815] fs.protected_hardlinks = 1 [2025-09-23 23:13:32.830] fs.protected_symlinks = 1 [2025-09-23 23:13:32.830] kernel.modules_disabled = 1 [2025-09-23 23:13:33.023] [2025-09-23 23:13:33.023] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:13:34.295] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:13:42.104] SBL1:1210.0.1.0 [2025-09-23 23:13:42.136] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:13:43.719] SBL2:1210.0.1.0 [2025-09-23 23:13:43.751] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:13:43.863] j-A [2025-09-23 23:13:51.218] The R5 Autosar Classic is running [2025-09-23 23:13:51.218] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:13:51.239] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:13:51.847] INIT: version 2.96 booting [2025-09-23 23:13:51.959] INIT: Entering runlevel: 5 [2025-09-23 23:13:52.102] mtd24 attached [2025-09-23 23:13:52.118] mtd28 attached [2025-09-23 23:13:52.134] mtd32 attached [2025-09-23 23:13:52.238] RTNETLINK answers: File exists [2025-09-23 23:13:52.238] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:13:52.238] ubi0:textures is mounted. [2025-09-23 23:13:52.238] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:13:52.238] ubi1:animations is mounted. [2025-09-23 23:13:52.238] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:13:52.238] ubi2:dml_code is mounted. [2025-09-23 23:13:52.238] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:13:52.238] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:13:52.238] data.LB_FadeInType0=100 [2025-09-23 23:13:52.238] data.CHLH_FadeInType0=0 [2025-09-23 23:13:52.238] data.WU_FadeInDelay=0 [2025-09-23 23:13:52.238] max_time_out=0 [2025-09-23 23:13:52.238] No splash screen [2025-09-23 23:13:52.238] stop dss Done [2025-09-23 23:13:52.309] /dev/mem opened. [2025-09-23 23:13:52.309] Memory mapped at address 0xffffb9232000. [2025-09-23 23:13:52.309] Read at address 0x00600018 (0xffffb9232018): 0x00000000 [2025-09-23 23:13:52.309] Write at address 0x00600018 (0xffffb9232018): 0x00400040, readback 0x00400040 [2025-09-23 23:13:52.309] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:13:52.340] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:13:52.516] Loaded PowerVR consumer services. [2025-09-23 23:13:52.596] Waiting data available... [2025-09-23 23:13:52.628] 512+0 records in [2025-09-23 23:13:52.628] 512+0 records out [2025-09-23 23:13:52.660] Starting syslogd/klogd: done [2025-09-23 23:13:52.676] DML Start [2025-09-23 23:13:52.820] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:13:53.028] DML res1: 0 [2025-09-23 23:13:53.553] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:13:53.553] Read Success [2025-09-23 23:13:53.553] Verifying certificate... [2025-09-23 23:13:53.777] Verified OK [2025-09-23 23:13:53.809] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:13:55.318] Verified OK [2025-09-23 23:13:55.318] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:13:55.942] Verified OK [2025-09-23 23:13:55.942] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:13:58.676] fs.protected_hardlinks = 1 [2025-09-23 23:13:58.692] fs.protected_symlinks = 1 [2025-09-23 23:13:58.692] kernel.modules_disabled = 1 [2025-09-23 23:13:58.884] [2025-09-23 23:13:58.884] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:14:00.109] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:14:07.853] SBL1:1210.0.1.0 [2025-09-23 23:14:07.901] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:14:09.468] SBL2:1210.0.1.0 [2025-09-23 23:14:09.516] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:14:09.612] j-A [2025-09-23 23:14:16.967] The R5 Autosar Classic is running [2025-09-23 23:14:16.989] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:14:16.989] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:14:17.597] INIT: version 2.96 booting [2025-09-23 23:14:17.709] INIT: Entering runlevel: 5 [2025-09-23 23:14:17.853] mtd24 attached [2025-09-23 23:14:17.869] mtd28 attached [2025-09-23 23:14:17.885] mtd32 attached [2025-09-23 23:14:17.933] ubi0:textures is mounted. [2025-09-23 23:14:17.933] RTNETLINK answers: File exists [2025-09-23 23:14:17.992] ubi1:animations is mounted. [2025-09-23 23:14:17.992] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:14:17.992] ubi2:dml_code is mounted. [2025-09-23 23:14:17.992] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:14:17.992] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:14:17.992] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:14:17.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:14:17.992] data.LB_FadeInType0=100 [2025-09-23 23:14:17.992] data.CHLH_FadeInType0=0 [2025-09-23 23:14:17.992] data.WU_FadeInDelay=0 [2025-09-23 23:14:17.992] max_time_out=0 [2025-09-23 23:14:17.992] No splash screen [2025-09-23 23:14:17.992] stop dss Done [2025-09-23 23:14:18.024] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:14:18.073] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:14:18.073] /dev/mem opened. [2025-09-23 23:14:18.073] Memory mapped at address 0xffff83d9b000. [2025-09-23 23:14:18.073] Read at address 0x00600018 (0xffff83d9b018): 0x00000000 [2025-09-23 23:14:18.073] Write at address 0x00600018 (0xffff83d9b018): 0x00400040, readback 0x00400040 [2025-09-23 23:14:18.313] Loaded PowerVR consumer services. [2025-09-23 23:14:18.313] Waiting data available... [2025-09-23 23:14:18.345] 512+0 records in [2025-09-23 23:14:18.345] 512+0 records out [2025-09-23 23:14:18.392] Starting syslogd/klogd: done [2025-09-23 23:14:18.408] DML Start [2025-09-23 23:14:18.569] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:14:18.792] DML res1: 0 [2025-09-23 23:14:19.240] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:14:19.261] Read Success [2025-09-23 23:14:19.261] Verifying certificate... [2025-09-23 23:14:19.501] Verified OK [2025-09-23 23:14:19.517] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:14:21.164] Verified OK [2025-09-23 23:14:21.164] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:14:21.772] Verified OK [2025-09-23 23:14:21.788] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:14:24.426] fs.protected_hardlinks = 1 [2025-09-23 23:14:24.426] fs.protected_symlinks = 1 [2025-09-23 23:14:24.442] kernel.modules_disabled = 1 [2025-09-23 23:14:24.634] [2025-09-23 23:14:24.634] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:14:25.848] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:14:33.609] SBL1:1210.0.1.0 [2025-09-23 23:14:33.640] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:14:35.224] SBL2:1210.0.1.0 [2025-09-23 23:14:35.271] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:14:35.367] j-A [2025-09-23 23:14:42.722] The R5 Autosar Classic is running [2025-09-23 23:14:42.744] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:14:42.744] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:14:43.352] INIT: version 2.96 booting [2025-09-23 23:14:43.463] INIT: Entering runlevel: 5 [2025-09-23 23:14:43.608] mtd24 attached [2025-09-23 23:14:43.623] mtd32 attached [2025-09-23 23:14:43.640] mtd28 attached [2025-09-23 23:14:43.693] ubi0:textures is mounted. [2025-09-23 23:14:43.693] RTNETLINK answers: File exists [2025-09-23 23:14:43.693] ubi1:dml_code is mounted. [2025-09-23 23:14:43.693] ubi2:animations is mounted. [2025-09-23 23:14:43.747] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:14:43.747] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:14:43.747] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:14:43.747] data.LB_FadeInType0=100 [2025-09-23 23:14:43.747] data.CHLH_FadeInType0=0 [2025-09-23 23:14:43.747] data.WU_FadeInDelay=0 [2025-09-23 23:14:43.747] max_time_out=0 [2025-09-23 23:14:43.747] No splash screen [2025-09-23 23:14:43.747] stop dss Done [2025-09-23 23:14:43.747] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:14:43.747] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:14:43.779] /dev/mem opened. [2025-09-23 23:14:43.812] Memory mapped at address 0xffffb76f9000. [2025-09-23 23:14:43.812] Read at address 0x00600018 (0xffffb76f9018): 0x00000000 [2025-09-23 23:14:43.812] Write at address 0x00600018 (0xffffb76f9018): 0x00400040, readback 0x00400040 [2025-09-23 23:14:43.874] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:14:43.874] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:14:44.049] Loaded PowerVR consumer services. [2025-09-23 23:14:44.065] Waiting data available... [2025-09-23 23:14:44.097] 512+0 records in [2025-09-23 23:14:44.097] 512+0 records out [2025-09-23 23:14:44.146] Starting syslogd/klogd: done [2025-09-23 23:14:44.162] DML Start [2025-09-23 23:14:44.305] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:14:44.529] DML res1: 0 [2025-09-23 23:14:45.014] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:14:45.014] Read Success [2025-09-23 23:14:45.014] Verifying certificate... [2025-09-23 23:14:45.271] Verified OK [2025-09-23 23:14:45.303] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:14:46.924] Verified OK [2025-09-23 23:14:46.924] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:14:47.484] Verified OK [2025-09-23 23:14:47.484] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:14:50.138] fs.protected_hardlinks = 1 [2025-09-23 23:14:50.138] fs.protected_symlinks = 1 [2025-09-23 23:14:50.154] kernel.modules_disabled = 1 [2025-09-23 23:14:50.346] [2025-09-23 23:14:50.346] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:14:51.576] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:14:59.353] SBL1:1210.0.1.0 [2025-09-23 23:14:59.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:15:00.968] SBL2:1210.0.1.0 [2025-09-23 23:15:01.000] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:15:01.112] j-A [2025-09-23 23:15:08.487] The R5 Autosar Classic is running [2025-09-23 23:15:08.487] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:15:08.487] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:15:09.095] INIT: version 2.96 booting [2025-09-23 23:15:09.190] INIT: Entering runlevel: 5 [2025-09-23 23:15:09.351] mtd24 attached [2025-09-23 23:15:09.367] mtd28 attached [2025-09-23 23:15:09.399] ubi0:textures is mounted. [2025-09-23 23:15:09.415] mtd32 attached [2025-09-23 23:15:09.415] ubi1:animations is mounted. [2025-09-23 23:15:09.431] RTNETLINK answers: File exists [2025-09-23 23:15:09.447] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:15:09.447] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:15:09.492] ubi2:dml_code is mounted. [2025-09-23 23:15:09.492] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:15:09.492] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:15:09.492] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:15:09.492] data.LB_FadeInType0=100 [2025-09-23 23:15:09.492] data.CHLH_FadeInType0=0 [2025-09-23 23:15:09.492] data.WU_FadeInDelay=0 [2025-09-23 23:15:09.492] max_time_out=0 [2025-09-23 23:15:09.492] No splash screen [2025-09-23 23:15:09.492] stop dss Done [2025-09-23 23:15:09.595] /dev/mem opened. [2025-09-23 23:15:09.595] Memory mapped at address 0xffffaa714000. [2025-09-23 23:15:09.595] Read at address 0x00600018 (0xffffaa714018): 0x00000000 [2025-09-23 23:15:09.595] Write at address 0x00600018 (0xffffaa714018): 0x00400040, readback 0x00400040 [2025-09-23 23:15:09.595] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:15:09.595] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:15:09.835] Loaded PowerVR consumer services. [2025-09-23 23:15:09.879] Waiting data available... [2025-09-23 23:15:09.879] 512+0 records in [2025-09-23 23:15:09.879] 512+0 records out [2025-09-23 23:15:09.895] Starting syslogd/klogd: done [2025-09-23 23:15:09.911] DML Start [2025-09-23 23:15:10.070] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:15:10.263] DML res1: 0 [2025-09-23 23:15:10.823] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:15:10.839] Read Success [2025-09-23 23:15:10.839] Verifying certificate... [2025-09-23 23:15:11.078] Verified OK [2025-09-23 23:15:11.142] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:15:12.716] Verified OK [2025-09-23 23:15:12.716] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:15:13.369] Verified OK [2025-09-23 23:15:13.369] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:15:15.976] fs.protected_hardlinks = 1 [2025-09-23 23:15:15.992] fs.protected_symlinks = 1 [2025-09-23 23:15:15.992] kernel.modules_disabled = 1 [2025-09-23 23:15:16.200] [2025-09-23 23:15:16.200] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:15:17.308] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:15:25.113] SBL1:1210.0.1.0 [2025-09-23 23:15:25.161] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:15:26.729] SBL2:1210.0.1.0 [2025-09-23 23:15:26.777] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:15:26.872] j-A [2025-09-23 23:15:34.229] The R5 Autosar Classic is running [2025-09-23 23:15:34.251] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:15:34.251] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:15:34.858] INIT: version 2.96 booting [2025-09-23 23:15:34.970] INIT: Entering runlevel: 5 [2025-09-23 23:15:35.114] mtd24 attached [2025-09-23 23:15:35.130] mtd28 attached [2025-09-23 23:15:35.147] mtd32 attached [2025-09-23 23:15:35.162] ubi0:textures is mounted. [2025-09-23 23:15:35.194] RTNETLINK answers: File exists [2025-09-23 23:15:35.194] ubi1:animations is mounted. [2025-09-23 23:15:35.248] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:15:35.248] ubi2:dml_code is mounted. [2025-09-23 23:15:35.248] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:15:35.248] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:15:35.248] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:15:35.248] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:15:35.248] data.LB_FadeInType0=100 [2025-09-23 23:15:35.248] data.CHLH_FadeInType0=0 [2025-09-23 23:15:35.248] data.WU_FadeInDelay=0 [2025-09-23 23:15:35.248] max_time_out=0 [2025-09-23 23:15:35.248] No splash screen [2025-09-23 23:15:35.248] stop dss Done [2025-09-23 23:15:35.296] /dev/mem opened. [2025-09-23 23:15:35.296] Memory mapped at address 0xffff811e2000. [2025-09-23 23:15:35.328] Read at address 0x00600018 (0xffff811e2018): 0x00000000 [2025-09-23 23:15:35.328] Write at address 0x00600018 (0xffff811e2018): 0x00400040, readback 0x00400040 [2025-09-23 23:15:35.328] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:15:35.328] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:15:35.552] Loaded PowerVR consumer services. [2025-09-23 23:15:35.568] Waiting data available... [2025-09-23 23:15:35.600] 512+0 records in [2025-09-23 23:15:35.600] 512+0 records out [2025-09-23 23:15:35.648] Starting syslogd/klogd: done [2025-09-23 23:15:35.664] DML Start [2025-09-23 23:15:35.808] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:15:36.000] DML res1: 0 [2025-09-23 23:15:36.544] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:15:36.565] Read Success [2025-09-23 23:15:36.565] Verifying certificate... [2025-09-23 23:15:36.804] Verified OK [2025-09-23 23:15:36.804] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:15:38.419] Verified OK [2025-09-23 23:15:38.419] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:15:39.118] Verified OK [2025-09-23 23:15:39.118] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:15:41.725] fs.protected_hardlinks = 1 [2025-09-23 23:15:41.741] fs.protected_symlinks = 1 [2025-09-23 23:15:41.741] kernel.modules_disabled = 1 [2025-09-23 23:15:41.932] [2025-09-23 23:15:41.932] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:15:43.094] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:15:50.886] SBL1:1210.0.1.0 [2025-09-23 23:15:50.918] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:15:52.500] SBL2:1210.0.1.0 [2025-09-23 23:15:52.548] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:15:52.644] j-A [2025-09-23 23:16:00.001] The R5 Autosar Classic is running [2025-09-23 23:16:00.001] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:16:00.022] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:16:00.630] INIT: version 2.96 booting [2025-09-23 23:16:00.741] INIT: Entering runlevel: 5 [2025-09-23 23:16:00.886] mtd24 attached [2025-09-23 23:16:00.902] mtd32 attached [2025-09-23 23:16:00.918] mtd28 attached [2025-09-23 23:16:00.965] RTNETLINK answers: File exists [2025-09-23 23:16:00.965] ubi0:textures is mounted. [2025-09-23 23:16:00.998] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:16:00.998] ubi1:dml_code is mounted. [2025-09-23 23:16:00.998] ubi2:animations is mounted. [2025-09-23 23:16:00.998] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:16:00.998] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:16:01.034] data.LB_FadeInType0=100 [2025-09-23 23:16:01.034] data.CHLH_FadeInType0=0 [2025-09-23 23:16:01.034] data.WU_FadeInDelay=0 [2025-09-23 23:16:01.034] max_time_out=0 [2025-09-23 23:16:01.034] No splash screen [2025-09-23 23:16:01.034] stop dss Done [2025-09-23 23:16:01.034] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:16:01.034] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:16:01.066] /dev/mem opened. [2025-09-23 23:16:01.066] Memory mapped at address 0xffff85661000. [2025-09-23 23:16:01.107] Read at address 0x00600018 (0xffff85661018): 0x00000000 [2025-09-23 23:16:01.107] Write at address 0x00600018 (0xffff85661018): 0x00400040, readback 0x00400040 [2025-09-23 23:16:01.107] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:16:01.107] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:16:01.187] Loaded PowerVR consumer services. [2025-09-23 23:16:01.362] Waiting data available... [2025-09-23 23:16:01.378] 512+0 records in [2025-09-23 23:16:01.378] 512+0 records out [2025-09-23 23:16:01.394] Starting syslogd/klogd: done [2025-09-23 23:16:01.410] DML Start [2025-09-23 23:16:01.586] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:16:01.858] DML res1: 0 [2025-09-23 23:16:02.267] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:16:02.267] Read Success [2025-09-23 23:16:02.267] Verifying certificate... [2025-09-23 23:16:02.555] Verified OK [2025-09-23 23:16:02.571] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:16:04.201] Verified OK [2025-09-23 23:16:04.201] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:16:04.818] Verified OK [2025-09-23 23:16:04.818] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:16:07.488] fs.protected_hardlinks = 1 [2025-09-23 23:16:07.488] fs.protected_symlinks = 1 [2025-09-23 23:16:07.504] kernel.modules_disabled = 1 [2025-09-23 23:16:07.696] [2025-09-23 23:16:07.696] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:16:08.873] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:16:16.625] SBL1:1210.0.1.0 [2025-09-23 23:16:16.657] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:16:18.239] SBL2:1210.0.1.0 [2025-09-23 23:16:18.271] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:16:18.383] j-A [2025-09-23 23:16:25.758] The R5 Autosar Classic is running [2025-09-23 23:16:25.758] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:16:25.758] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:16:26.366] INIT: version 2.96 booting [2025-09-23 23:16:26.477] INIT: Entering runlevel: 5 [2025-09-23 23:16:26.638] mtd32 attached [2025-09-23 23:16:26.653] mtd28 attached [2025-09-23 23:16:26.653] mtd24 attached [2025-09-23 23:16:26.669] ubi0:dml_code is mounted. [2025-09-23 23:16:26.701] RTNETLINK answers: File exists [2025-09-23 23:16:26.763] ubi1:animations is mounted. [2025-09-23 23:16:26.763] ubi2:textures is mounted. [2025-09-23 23:16:26.763] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:16:26.763] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:16:26.763] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:16:26.763] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:16:26.763] data.LB_FadeInType0=100 [2025-09-23 23:16:26.763] data.CHLH_FadeInType0=0 [2025-09-23 23:16:26.763] data.WU_FadeInDelay=0 [2025-09-23 23:16:26.763] max_time_out=0 [2025-09-23 23:16:26.763] No splash screen [2025-09-23 23:16:26.763] stop dss Done [2025-09-23 23:16:26.763] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:16:26.849] /dev/mem opened. [2025-09-23 23:16:26.849] Memory mapped at address 0xffffab9f6000. [2025-09-23 23:16:26.849] Read at address 0x00600018 (0xffffab9f6018): 0x00000000 [2025-09-23 23:16:26.849] Write at address 0x00600018 (0xffffab9f6018): 0x00400040, readback 0x00400040 [2025-09-23 23:16:26.849] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:16:26.849] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:16:27.073] Loaded PowerVR consumer services. [2025-09-23 23:16:27.149] Waiting data available... [2025-09-23 23:16:27.149] 512+0 records in [2025-09-23 23:16:27.149] 512+0 records out [2025-09-23 23:16:27.165] Starting syslogd/klogd: done [2025-09-23 23:16:27.181] DML Start [2025-09-23 23:16:27.373] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:16:27.613] DML res1: 0 [2025-09-23 23:16:27.930] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:16:27.930] Read Success [2025-09-23 23:16:27.930] Verifying certificate... [2025-09-23 23:16:28.185] Verified OK [2025-09-23 23:16:28.201] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:16:29.927] Verified OK [2025-09-23 23:16:29.927] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:16:30.535] Verified OK [2025-09-23 23:16:30.551] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:16:33.254] fs.protected_hardlinks = 1 [2025-09-23 23:16:33.254] fs.protected_symlinks = 1 [2025-09-23 23:16:33.269] kernel.modules_disabled = 1 [2025-09-23 23:16:33.477] [2025-09-23 23:16:33.477] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:16:34.690] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:16:42.358] SBL1:1210.0.1.0 [2025-09-23 23:16:42.406] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:16:43.973] SBL2:1210.0.1.0 [2025-09-23 23:16:44.021] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:16:44.117] j-A [2025-09-23 23:16:51.473] The R5 Autosar Classic is running [2025-09-23 23:16:51.498] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:16:51.498] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:16:52.107] INIT: version 2.96 booting [2025-09-23 23:16:52.218] INIT: Entering runlevel: 5 [2025-09-23 23:16:52.363] mtd28 attached [2025-09-23 23:16:52.378] mtd24 attached [2025-09-23 23:16:52.394] mtd32 attached [2025-09-23 23:16:52.497] ubi0:animations is mounted. [2025-09-23 23:16:52.497] ubi1:textures is mounted. [2025-09-23 23:16:52.497] RTNETLINK answers: File exists [2025-09-23 23:16:52.497] ubi2:dml_code is mounted. [2025-09-23 23:16:52.497] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:16:52.497] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:16:52.497] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:16:52.497] data.LB_FadeInType0=100 [2025-09-23 23:16:52.497] data.CHLH_FadeInType0=0 [2025-09-23 23:16:52.497] data.WU_FadeInDelay=0 [2025-09-23 23:16:52.497] max_time_out=0 [2025-09-23 23:16:52.497] No splash screen [2025-09-23 23:16:52.497] stop dss Done [2025-09-23 23:16:52.497] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:16:52.497] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:16:52.586] /dev/mem opened. [2025-09-23 23:16:52.586] Memory mapped at address 0xffff88ca7000. [2025-09-23 23:16:52.586] Read at address 0x00600018 (0xffff88ca7018): 0x00000000 [2025-09-23 23:16:52.586] Write at address 0x00600018 (0xffff88ca7018): 0x00400040, readback 0x00400040 [2025-09-23 23:16:52.586] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:16:52.586] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:16:52.650] Loaded PowerVR consumer services. [2025-09-23 23:16:52.826] Waiting data available... [2025-09-23 23:16:52.857] 512+0 records in [2025-09-23 23:16:52.857] 512+0 records out [2025-09-23 23:16:52.889] Starting syslogd/klogd: done [2025-09-23 23:16:52.922] DML Start [2025-09-23 23:16:53.098] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:16:53.354] DML res1: 0 [2025-09-23 23:16:53.726] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:16:53.726] Read Success [2025-09-23 23:16:53.726] Verifying certificate... [2025-09-23 23:16:53.999] Verified OK [2025-09-23 23:16:54.015] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:16:55.659] Verified OK [2025-09-23 23:16:55.659] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:16:56.281] Verified OK [2025-09-23 23:16:56.281] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:16:58.967] fs.protected_hardlinks = 1 [2025-09-23 23:16:58.967] fs.protected_symlinks = 1 [2025-09-23 23:16:58.983] kernel.modules_disabled = 1 [2025-09-23 23:16:59.175] [2025-09-23 23:16:59.175] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:17:00.406] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:17:08.126] SBL1:1210.0.1.0 [2025-09-23 23:17:08.174] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:17:09.741] SBL2:1210.0.1.0 [2025-09-23 23:17:09.789] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:17:09.901] j-A [2025-09-23 23:17:17.272] The R5 Autosar Classic is running [2025-09-23 23:17:17.272] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:17:17.272] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:17:17.881] INIT: version 2.96 booting [2025-09-23 23:17:17.992] INIT: Entering runlevel: 5 [2025-09-23 23:17:18.136] mtd24 attached [2025-09-23 23:17:18.152] mtd28 attached [2025-09-23 23:17:18.168] mtd32 attached [2025-09-23 23:17:18.267] ubi0:textures is mounted. [2025-09-23 23:17:18.267] RTNETLINK answers: File exists [2025-09-23 23:17:18.267] ubi1:animations is mounted. [2025-09-23 23:17:18.267] ubi2:dml_code is mounted. [2025-09-23 23:17:18.267] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:17:18.267] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:17:18.267] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:17:18.267] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:17:18.267] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:17:18.267] data.LB_FadeInType0=100 [2025-09-23 23:17:18.267] data.CHLH_FadeInType0=0 [2025-09-23 23:17:18.267] data.WU_FadeInDelay=0 [2025-09-23 23:17:18.267] max_time_out=0 [2025-09-23 23:17:18.267] No splash screen [2025-09-23 23:17:18.267] stop dss Done [2025-09-23 23:17:18.308] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:17:18.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:17:18.308] /dev/mem opened. [2025-09-23 23:17:18.340] Memory mapped at address 0xffff9c199000. [2025-09-23 23:17:18.340] Read at address 0x00600018 (0xffff9c199018): 0x00000000 [2025-09-23 23:17:18.340] Write at address 0x00600018 (0xffff9c199018): 0x00400040, readback 0x00400040 [2025-09-23 23:17:18.602] Loaded PowerVR consumer services. [2025-09-23 23:17:18.602] Waiting data available... [2025-09-23 23:17:18.634] 512+0 records in [2025-09-23 23:17:18.634] 512+0 records out [2025-09-23 23:17:18.681] Starting syslogd/klogd: done [2025-09-23 23:17:18.697] DML Start [2025-09-23 23:17:18.858] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:17:19.066] DML res1: 0 [2025-09-23 23:17:19.650] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:17:19.650] Read Success [2025-09-23 23:17:19.650] Verifying certificate... [2025-09-23 23:17:19.986] Verified OK [2025-09-23 23:17:20.019] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:17:21.786] Verified OK [2025-09-23 23:17:21.786] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:17:22.346] Verified OK [2025-09-23 23:17:22.346] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:17:24.841] fs.protected_hardlinks = 1 [2025-09-23 23:17:24.841] fs.protected_symlinks = 1 [2025-09-23 23:17:24.857] kernel.modules_disabled = 1 [2025-09-23 23:17:25.033] [2025-09-23 23:17:25.033] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:17:26.181] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:17:33.897] SBL1:1210.0.1.0 [2025-09-23 23:17:33.929] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:17:35.512] SBL2:1210.0.1.0 [2025-09-23 23:17:35.560] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:17:35.656] j-A [2025-09-23 23:17:43.011] The R5 Autosar Classic is running [2025-09-23 23:17:43.032] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:17:43.032] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:17:43.640] INIT: version 2.96 booting [2025-09-23 23:17:43.751] INIT: Entering runlevel: 5 [2025-09-23 23:17:43.895] mtd24 attached [2025-09-23 23:17:43.912] mtd28 attached [2025-09-23 23:17:43.928] mtd32 attached [2025-09-23 23:17:44.007] RTNETLINK answers: File exists [2025-09-23 23:17:44.007] ubi0:textures is mounted. [2025-09-23 23:17:44.007] ubi1:animations is mounted. [2025-09-23 23:17:44.007] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:17:44.007] ubi2:dml_code is mounted. [2025-09-23 23:17:44.007] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:17:44.007] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:17:44.041] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:17:44.041] data.LB_FadeInType0=100 [2025-09-23 23:17:44.041] data.CHLH_FadeInType0=0 [2025-09-23 23:17:44.041] data.WU_FadeInDelay=0 [2025-09-23 23:17:44.041] max_time_out=0 [2025-09-23 23:17:44.041] No splash screen [2025-09-23 23:17:44.041] stop dss Done [2025-09-23 23:17:44.041] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:17:44.073] /dev/mem opened. [2025-09-23 23:17:44.105] Memory mapped at address 0xffffb14ab000. [2025-09-23 23:17:44.105] Read at address 0x00600018 (0xffffb14ab018): 0x00000000 [2025-09-23 23:17:44.105] Write at address 0x00600018 (0xffffb14ab018): 0x00400040, readback 0x00400040 [2025-09-23 23:17:44.137] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:17:44.153] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:17:44.265] Loaded PowerVR consumer services. [2025-09-23 23:17:44.377] Waiting data available... [2025-09-23 23:17:44.393] 512+0 records in [2025-09-23 23:17:44.393] 512+0 records out [2025-09-23 23:17:44.441] Starting syslogd/klogd: done [2025-09-23 23:17:44.457] DML Start [2025-09-23 23:17:44.617] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:17:44.857] DML res1: 0 [2025-09-23 23:17:45.273] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:17:45.289] Read Success [2025-09-23 23:17:45.289] Verifying certificate... [2025-09-23 23:17:45.513] Verified OK [2025-09-23 23:17:45.529] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:17:47.176] Verified OK [2025-09-23 23:17:47.176] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:17:47.845] Verified OK [2025-09-23 23:17:47.845] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:17:50.516] fs.protected_hardlinks = 1 [2025-09-23 23:17:50.532] fs.protected_symlinks = 1 [2025-09-23 23:17:50.532] kernel.modules_disabled = 1 [2025-09-23 23:17:50.724] [2025-09-23 23:17:50.724] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:17:51.864] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:17:59.657] SBL1:1210.0.1.0 [2025-09-23 23:17:59.689] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:18:01.271] SBL2:1210.0.1.0 [2025-09-23 23:18:01.319] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:18:01.416] j-A [2025-09-23 23:18:08.771] The R5 Autosar Classic is running [2025-09-23 23:18:08.791] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:18:08.791] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:18:09.399] INIT: version 2.96 booting [2025-09-23 23:18:09.511] INIT: Entering runlevel: 5 [2025-09-23 23:18:09.671] mtd24 attached [2025-09-23 23:18:09.671] mtd28 attached [2025-09-23 23:18:09.687] mtd32 attached [2025-09-23 23:18:09.718] ubi0:textures is mounted. [2025-09-23 23:18:09.734] RTNETLINK answers: File exists [2025-09-23 23:18:09.734] ubi1:animations is mounted. [2025-09-23 23:18:09.790] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:18:09.790] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:18:09.790] ubi2:dml_code is mounted. [2025-09-23 23:18:09.790] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:18:09.790] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:18:09.790] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:18:09.790] data.LB_FadeInType0=100 [2025-09-23 23:18:09.790] data.CHLH_FadeInType0=0 [2025-09-23 23:18:09.790] data.WU_FadeInDelay=0 [2025-09-23 23:18:09.790] max_time_out=0 [2025-09-23 23:18:09.790] No splash screen [2025-09-23 23:18:09.790] stop dss Done [2025-09-23 23:18:09.861] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:18:09.861] /dev/mem opened. [2025-09-23 23:18:09.861] Memory mapped at address 0xffffb1d3a000. [2025-09-23 23:18:09.861] Read at address 0x00600018 (0xffffb1d3a018): 0x00000000 [2025-09-23 23:18:09.861] Write at address 0x00600018 (0xffffb1d3a018): 0x00400040, readback 0x00400040 [2025-09-23 23:18:09.861] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:18:10.021] Loaded PowerVR consumer services. [2025-09-23 23:18:10.132] Waiting data available... [2025-09-23 23:18:10.165] 512+0 records in [2025-09-23 23:18:10.165] 512+0 records out [2025-09-23 23:18:10.197] Starting syslogd/klogd: done [2025-09-23 23:18:10.213] DML Start [2025-09-23 23:18:10.388] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:18:10.629] DML res1: 0 [2025-09-23 23:18:11.092] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:18:11.108] Read Success [2025-09-23 23:18:11.108] Verifying certificate... [2025-09-23 23:18:11.380] Verified OK [2025-09-23 23:18:11.395] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:18:13.107] Verified OK [2025-09-23 23:18:13.107] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:18:13.680] Verified OK [2025-09-23 23:18:13.680] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:18:16.143] fs.protected_hardlinks = 1 [2025-09-23 23:18:16.143] fs.protected_symlinks = 1 [2025-09-23 23:18:16.158] kernel.modules_disabled = 1 [2025-09-23 23:18:16.350] [2025-09-23 23:18:16.350] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:18:17.723] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:18:25.403] SBL1:1210.0.1.0 [2025-09-23 23:18:25.435] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:18:27.018] SBL2:1210.0.1.0 [2025-09-23 23:18:27.050] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:18:27.162] j-A [2025-09-23 23:18:34.536] The R5 Autosar Classic is running [2025-09-23 23:18:34.536] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:18:34.536] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:18:35.144] INIT: version 2.96 booting [2025-09-23 23:18:35.255] INIT: Entering runlevel: 5 [2025-09-23 23:18:35.399] mtd24 attached [2025-09-23 23:18:35.415] mtd28 attached [2025-09-23 23:18:35.431] mtd32 attached [2025-09-23 23:18:35.463] ubi0:textures is mounted. [2025-09-23 23:18:35.479] RTNETLINK answers: File exists [2025-09-23 23:18:35.479] ubi1:animations is mounted. [2025-09-23 23:18:35.507] ubi2:dml_code is mounted. [2025-09-23 23:18:35.507] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:18:35.507] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:18:35.539] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:18:35.539] data.LB_FadeInType0=100 [2025-09-23 23:18:35.539] data.CHLH_FadeInType0=0 [2025-09-23 23:18:35.539] data.WU_FadeInDelay=0 [2025-09-23 23:18:35.539] max_time_out=0 [2025-09-23 23:18:35.539] No splash screen [2025-09-23 23:18:35.539] stop dss Done [2025-09-23 23:18:35.539] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:18:35.539] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:18:35.587] /dev/mem opened. [2025-09-23 23:18:35.587] Memory mapped at address 0xffff8569f000. [2025-09-23 23:18:35.629] Read at address 0x00600018 (0xffff8569f018): 0x00000000 [2025-09-23 23:18:35.629] Write at address 0x00600018 (0xffff8569f018): 0x00400040, readback 0x00400040 [2025-09-23 23:18:35.629] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:18:35.629] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:18:35.789] Loaded PowerVR consumer services. [2025-09-23 23:18:35.885] Waiting data available... [2025-09-23 23:18:35.917] 512+0 records in [2025-09-23 23:18:35.917] 512+0 records out [2025-09-23 23:18:35.948] Starting syslogd/klogd: done [2025-09-23 23:18:35.964] DML Start [2025-09-23 23:18:36.140] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:18:36.380] DML res1: 0 [2025-09-23 23:18:36.748] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:18:36.748] Read Success [2025-09-23 23:18:36.748] Verifying certificate... [2025-09-23 23:18:36.987] Verified OK [2025-09-23 23:18:36.987] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:18:38.719] Verified OK [2025-09-23 23:18:38.719] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:18:39.305] Verified OK [2025-09-23 23:18:39.305] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:18:41.944] fs.protected_hardlinks = 1 [2025-09-23 23:18:41.960] fs.protected_symlinks = 1 [2025-09-23 23:18:41.960] kernel.modules_disabled = 1 [2025-09-23 23:18:42.168] [2025-09-23 23:18:42.168] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:18:43.392] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:18:51.209] SBL1:1210.0.1.0 [2025-09-23 23:18:51.241] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:18:52.824] SBL2:1210.0.1.0 [2025-09-23 23:18:52.872] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:18:52.968] j-A [2025-09-23 23:19:00.323] The R5 Autosar Classic is running [2025-09-23 23:19:00.344] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:19:00.344] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:19:00.953] INIT: version 2.96 booting [2025-09-23 23:19:01.064] INIT: Entering runlevel: 5 [2025-09-23 23:19:01.209] mtd24 attached [2025-09-23 23:19:01.225] mtd28 attached [2025-09-23 23:19:01.240] mtd32 attached [2025-09-23 23:19:01.322] RTNETLINK answers: File exists [2025-09-23 23:19:01.322] ubi0:textures is mounted. [2025-09-23 23:19:01.322] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:19:01.322] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:19:01.322] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:19:01.322] ubi2:dml_code is mounted. [2025-09-23 23:19:01.322] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:19:01.322] ubi1:animations is mounted. [2025-09-23 23:19:01.322] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:19:01.347] data.LB_FadeInType0=100 [2025-09-23 23:19:01.347] data.CHLH_FadeInType0=0 [2025-09-23 23:19:01.347] data.WU_FadeInDelay=0 [2025-09-23 23:19:01.347] max_time_out=0 [2025-09-23 23:19:01.347] No splash screen [2025-09-23 23:19:01.347] stop dss Done [2025-09-23 23:19:01.395] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:19:01.435] /dev/mem opened. [2025-09-23 23:19:01.435] Memory mapped at address 0xffff94bea000. [2025-09-23 23:19:01.435] Read at address 0x00600018 (0xffff94bea018): 0x00000000 [2025-09-23 23:19:01.435] Write at address 0x00600018 (0xffff94bea018): 0x00400040, readback 0x00400040 [2025-09-23 23:19:01.435] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:19:01.579] Loaded PowerVR consumer services. [2025-09-23 23:19:01.691] Waiting data available... [2025-09-23 23:19:01.707] 512+0 records in [2025-09-23 23:19:01.707] 512+0 records out [2025-09-23 23:19:01.754] Starting syslogd/klogd: done [2025-09-23 23:19:01.770] DML Start [2025-09-23 23:19:01.963] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:19:02.203] DML res1: 0 [2025-09-23 23:19:02.630] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:19:02.630] Read Success [2025-09-23 23:19:02.630] Verifying certificate... [2025-09-23 23:19:02.870] Verified OK [2025-09-23 23:19:02.886] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:19:04.673] Verified OK [2025-09-23 23:19:04.673] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:19:05.160] Verified OK [2025-09-23 23:19:05.160] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:19:07.688] fs.protected_hardlinks = 1 [2025-09-23 23:19:07.704] fs.protected_symlinks = 1 [2025-09-23 23:19:07.704] kernel.modules_disabled = 1 [2025-09-23 23:19:07.895] [2025-09-23 23:19:07.911] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:19:09.276] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:19:16.950] SBL1:1210.0.1.0 [2025-09-23 23:19:16.998] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:19:18.564] SBL2:1210.0.1.0 [2025-09-23 23:19:18.612] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 23:19:18.708] j-A [2025-09-23 23:19:26.064] The R5 Autosar Classic is running [2025-09-23 23:19:26.087] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:19:26.087] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:19:26.695] INIT: version 2.96 booting [2025-09-23 23:19:26.807] INIT: Entering runlevel: 5 [2025-09-23 23:19:26.967] mtd32 attached [2025-09-23 23:19:26.983] mtd24 attached [2025-09-23 23:19:26.983] mtd28 attached [2025-09-23 23:19:27.031] ubi0:dml_code is mounted. [2025-09-23 23:19:27.031] RTNETLINK answers: File exists [2025-09-23 23:19:27.065] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:19:27.065] ubi1:textures is mounted. [2025-09-23 23:19:27.065] ubi2:animations is mounted. [2025-09-23 23:19:27.065] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:19:27.065] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:19:27.097] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:19:27.097] data.LB_FadeInType0=100 [2025-09-23 23:19:27.097] data.CHLH_FadeInType0=0 [2025-09-23 23:19:27.097] data.WU_FadeInDelay=0 [2025-09-23 23:19:27.097] max_time_out=0 [2025-09-23 23:19:27.097] No splash screen [2025-09-23 23:19:27.097] stop dss Done [2025-09-23 23:19:27.097] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:19:27.129] /dev/mem opened. [2025-09-23 23:19:27.129] Memory mapped at address 0xffff9c83b000. [2025-09-23 23:19:27.168] Read at address 0x00600018 (0xffff9c83b018): 0x00000000 [2025-09-23 23:19:27.168] Write at address 0x00600018 (0xffff9c83b018): 0x00400040, readback 0x00400040 [2025-09-23 23:19:27.168] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:19:27.168] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:19:27.360] Loaded PowerVR consumer services. [2025-09-23 23:19:27.472] Waiting data available... [2025-09-23 23:19:27.488] 512+0 records in [2025-09-23 23:19:27.488] 512+0 records out [2025-09-23 23:19:27.519] Starting syslogd/klogd: done [2025-09-23 23:19:27.535] DML Start [2025-09-23 23:19:27.727] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:19:27.967] DML res1: 0 [2025-09-23 23:19:28.390] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:19:28.390] Read Success [2025-09-23 23:19:28.390] Verifying certificate... [2025-09-23 23:19:28.598] Verified OK [2025-09-23 23:19:28.614] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:19:30.267] Verified OK [2025-09-23 23:19:30.267] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:19:30.795] Verified OK [2025-09-23 23:19:30.795] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:19:33.337] fs.protected_hardlinks = 1 [2025-09-23 23:19:33.337] fs.protected_symlinks = 1 [2025-09-23 23:19:33.353] kernel.modules_disabled = 1 [2025-09-23 23:19:33.561] [2025-09-23 23:19:33.561] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:19:34.967] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:19:42.722] SBL1:1210.0.1.0 [2025-09-23 23:19:42.754] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:19:44.338] SBL2:1210.0.1.0 [2025-09-23 23:19:44.369] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:19:44.481] j-A [2025-09-23 23:19:51.856] The R5 Autosar Classic is running [2025-09-23 23:19:51.856] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:19:51.856] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:19:52.464] INIT: version 2.96 booting [2025-09-23 23:19:52.576] INIT: Entering runlevel: 5 [2025-09-23 23:19:52.736] mtd24 attached [2025-09-23 23:19:52.736] mtd28 attached [2025-09-23 23:19:52.752] mtd32 attached [2025-09-23 23:19:52.768] ubi0:textures is mounted. [2025-09-23 23:19:52.800] RTNETLINK answers: File exists [2025-09-23 23:19:52.843] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:19:52.843] ubi1:animations is mounted. [2025-09-23 23:19:52.843] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:19:52.843] ubi2:dml_code is mounted. [2025-09-23 23:19:52.843] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:19:52.843] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:19:52.843] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:19:52.869] data.LB_FadeInType0=100 [2025-09-23 23:19:52.869] data.CHLH_FadeInType0=0 [2025-09-23 23:19:52.869] data.WU_FadeInDelay=0 [2025-09-23 23:19:52.869] max_time_out=0 [2025-09-23 23:19:52.869] No splash screen [2025-09-23 23:19:52.869] stop dss Done [2025-09-23 23:19:52.916] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:19:52.953] /dev/mem opened. [2025-09-23 23:19:52.953] Memory mapped at address 0xffff97000000. [2025-09-23 23:19:52.953] Read at address 0x00600018 (0xffff97000018): 0x00000000 [2025-09-23 23:19:52.953] Write at address 0x00600018 (0xffff97000018): 0x00400040, readback 0x00400040 [2025-09-23 23:19:52.953] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:19:53.050] Loaded PowerVR consumer services. [2025-09-23 23:19:53.225] Waiting data available... [2025-09-23 23:19:53.241] 512+0 records in [2025-09-23 23:19:53.241] 512+0 records out [2025-09-23 23:19:53.273] Starting syslogd/klogd: done [2025-09-23 23:19:53.860] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:19:53.861] Read Success [2025-09-23 23:19:53.861] Verifying certificate... [2025-09-23 23:19:54.052] Verified OK [2025-09-23 23:19:54.068] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:19:55.011] Verified OK [2025-09-23 23:19:55.011] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:19:55.458] Verified OK [2025-09-23 23:19:55.458] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:19:58.416] fs.protected_hardlinks = 1 [2025-09-23 23:19:58.432] fs.protected_symlinks = 1 [2025-09-23 23:19:58.432] kernel.modules_disabled = 1 [2025-09-23 23:19:58.592] [2025-09-23 23:19:58.592] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:20:01.170] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:20:08.476] SBL1:1210.0.1.0 [2025-09-23 23:20:08.524] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:20:10.090] SBL2:1210.0.1.0 [2025-09-23 23:20:10.138] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:20:10.235] j-A [2025-09-23 23:20:17.591] The R5 Autosar Classic is running [2025-09-23 23:20:17.615] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:20:17.615] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:20:18.223] INIT: version 2.96 booting [2025-09-23 23:20:18.335] INIT: Entering runlevel: 5 [2025-09-23 23:20:18.494] mtd24 attached [2025-09-23 23:20:18.510] mtd32 attached [2025-09-23 23:20:18.510] mtd28 attached [2025-09-23 23:20:18.526] ubi0:textures is mounted. [2025-09-23 23:20:18.603] RTNETLINK answers: File exists [2025-09-23 23:20:18.603] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:20:18.603] ubi2:animations is mounted. [2025-09-23 23:20:18.603] ubi1:dml_code is mounted. [2025-09-23 23:20:18.603] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:20:18.603] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:20:18.603] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:20:18.629] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:20:18.629] data.LB_FadeInType0=100 [2025-09-23 23:20:18.629] data.CHLH_FadeInType0=0 [2025-09-23 23:20:18.629] data.WU_FadeInDelay=0 [2025-09-23 23:20:18.629] max_time_out=0 [2025-09-23 23:20:18.629] No splash screen [2025-09-23 23:20:18.629] stop dss Done [2025-09-23 23:20:18.714] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:20:18.714] /dev/mem opened. [2025-09-23 23:20:18.714] Memory mapped at address 0xffffb7851000. [2025-09-23 23:20:18.714] Read at address 0x00600018 (0xffffb7851018): 0x00000000 [2025-09-23 23:20:18.714] Write at address 0x00600018 (0xffffb7851018): 0x00400040, readback 0x00400040 [2025-09-23 23:20:18.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:20:18.810] Loaded PowerVR consumer services. [2025-09-23 23:20:18.970] Waiting data available... [2025-09-23 23:20:19.002] 512+0 records in [2025-09-23 23:20:19.002] 512+0 records out [2025-09-23 23:20:19.050] Starting syslogd/klogd: done [2025-09-23 23:20:19.066] DML Start [2025-09-23 23:20:19.227] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:20:19.451] DML res1: 0 [2025-09-23 23:20:19.914] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:20:19.930] Read Success [2025-09-23 23:20:19.930] Verifying certificate... [2025-09-23 23:20:20.218] Verified OK [2025-09-23 23:20:20.250] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:20:21.878] Verified OK [2025-09-23 23:20:21.878] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:20:22.467] Verified OK [2025-09-23 23:20:22.467] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:20:25.137] fs.protected_hardlinks = 1 [2025-09-23 23:20:25.137] fs.protected_symlinks = 1 [2025-09-23 23:20:25.154] kernel.modules_disabled = 1 [2025-09-23 23:20:25.345] [2025-09-23 23:20:25.345] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:20:26.509] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:20:34.227] SBL1:1210.0.1.0 [2025-09-23 23:20:34.259] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:20:35.842] SBL2:1210.0.1.0 [2025-09-23 23:20:35.874] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:20:35.987] j-A [2025-09-23 23:20:43.362] The R5 Autosar Classic is running [2025-09-23 23:20:43.362] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:20:43.362] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:20:43.971] INIT: version 2.96 booting [2025-09-23 23:20:44.066] INIT: Entering runlevel: 5 [2025-09-23 23:20:44.227] mtd24 attached [2025-09-23 23:20:44.243] mtd28 attached [2025-09-23 23:20:44.259] mtd32 attached [2025-09-23 23:20:44.306] RTNETLINK answers: File exists [2025-09-23 23:20:44.306] ubi1:animations is mounted. [2025-09-23 23:20:44.364] ubi0:textures is mounted. [2025-09-23 23:20:44.364] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:20:44.364] ubi2:dml_code is mounted. [2025-09-23 23:20:44.364] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:20:44.364] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:20:44.364] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:20:44.364] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:20:44.364] data.LB_FadeInType0=100 [2025-09-23 23:20:44.364] data.CHLH_FadeInType0=0 [2025-09-23 23:20:44.364] data.WU_FadeInDelay=0 [2025-09-23 23:20:44.364] max_time_out=0 [2025-09-23 23:20:44.364] No splash screen [2025-09-23 23:20:44.364] stop dss Done [2025-09-23 23:20:44.438] /dev/mem opened. [2025-09-23 23:20:44.438] Memory mapped at address 0xffffb8f36000. [2025-09-23 23:20:44.438] Read at address 0x00600018 (0xffffb8f36018): 0x00000000 [2025-09-23 23:20:44.438] Write at address 0x00600018 (0xffffb8f36018): 0x00400040, readback 0x00400040 [2025-09-23 23:20:44.438] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:20:44.469] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:20:44.645] Loaded PowerVR consumer services. [2025-09-23 23:20:44.740] Waiting data available... [2025-09-23 23:20:44.773] 512+0 records in [2025-09-23 23:20:44.773] 512+0 records out [2025-09-23 23:20:44.804] Starting syslogd/klogd: done [2025-09-23 23:20:44.820] DML Start [2025-09-23 23:20:44.980] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:20:45.156] DML res1: 0 [2025-09-23 23:20:45.701] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:20:45.717] Read Success [2025-09-23 23:20:45.717] Verifying certificate... [2025-09-23 23:20:45.955] Verified OK [2025-09-23 23:20:45.972] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:20:47.632] Verified OK [2025-09-23 23:20:47.632] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:20:48.191] Verified OK [2025-09-23 23:20:48.191] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:20:50.748] fs.protected_hardlinks = 1 [2025-09-23 23:20:50.748] fs.protected_symlinks = 1 [2025-09-23 23:20:50.748] kernel.modules_disabled = 1 [2025-09-23 23:20:50.939] [2025-09-23 23:20:50.939] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:20:52.219] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:20:59.995] SBL1:1210.0.1.0 [2025-09-23 23:21:00.043] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 23:21:01.610] SBL2:1210.0.1.0 [2025-09-23 23:21:01.658] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:21:01.769] j-A [2025-09-23 23:21:09.143] The R5 Autosar Classic is running [2025-09-23 23:21:09.143] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:21:09.143] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:21:09.750] INIT: version 2.96 booting [2025-09-23 23:21:09.862] INIT: Entering runlevel: 5 [2025-09-23 23:21:10.005] mtd24 attached [2025-09-23 23:21:10.021] mtd28 attached [2025-09-23 23:21:10.037] mtd32 attached [2025-09-23 23:21:10.141] ubi1:animations is mounted. [2025-09-23 23:21:10.141] ubi0:textures is mounted. [2025-09-23 23:21:10.141] RTNETLINK answers: File exists [2025-09-23 23:21:10.141] ubi2:dml_code is mounted. [2025-09-23 23:21:10.141] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:21:10.141] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:21:10.141] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:21:10.141] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:21:10.141] data.LB_FadeInType0=100 [2025-09-23 23:21:10.141] data.CHLH_FadeInType0=0 [2025-09-23 23:21:10.141] data.WU_FadeInDelay=0 [2025-09-23 23:21:10.141] max_time_out=0 [2025-09-23 23:21:10.141] No splash screen [2025-09-23 23:21:10.141] stop dss Done [2025-09-23 23:21:10.141] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:21:10.223] /dev/mem opened. [2025-09-23 23:21:10.223] Memory mapped at address 0xffffa6b5c000. [2025-09-23 23:21:10.223] Read at address 0x00600018 (0xffffa6b5c018): 0x00000000 [2025-09-23 23:21:10.223] Write at address 0x00600018 (0xffffa6b5c018): 0x00400040, readback 0x00400040 [2025-09-23 23:21:10.223] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:21:10.223] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:21:10.495] Loaded PowerVR consumer services. [2025-09-23 23:21:10.511] Waiting data available... [2025-09-23 23:21:10.527] 512+0 records in [2025-09-23 23:21:10.527] 512+0 records out [2025-09-23 23:21:10.574] Starting syslogd/klogd: done [2025-09-23 23:21:10.590] DML Start [2025-09-23 23:21:10.718] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:21:10.958] DML res1: 0 [2025-09-23 23:21:11.496] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:21:11.496] Read Success [2025-09-23 23:21:11.496] Verifying certificate... [2025-09-23 23:21:11.768] Verified OK [2025-09-23 23:21:11.800] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:21:13.491] Verified OK [2025-09-23 23:21:13.491] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:21:14.078] Verified OK [2025-09-23 23:21:14.078] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:21:16.652] fs.protected_hardlinks = 1 [2025-09-23 23:21:16.668] fs.protected_symlinks = 1 [2025-09-23 23:21:16.668] kernel.modules_disabled = 1 [2025-09-23 23:21:16.860] [2025-09-23 23:21:16.860] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:21:18.011] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:21:25.749] SBL1:1210.0.1.0 [2025-09-23 23:21:25.797] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:21:27.365] SBL2:1210.0.1.0 [2025-09-23 23:21:27.413] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:21:27.508] j-A [2025-09-23 23:21:34.864] The R5 Autosar Classic is running [2025-09-23 23:21:34.886] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:21:34.886] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:21:35.494] INIT: version 2.96 booting [2025-09-23 23:21:35.606] INIT: Entering runlevel: 5 [2025-09-23 23:21:35.749] mtd32 attached [2025-09-23 23:21:35.765] mtd24 attached [2025-09-23 23:21:35.781] mtd28 attached [2025-09-23 23:21:35.830] RTNETLINK answers: File exists [2025-09-23 23:21:35.830] ubi0:dml_code is mounted. [2025-09-23 23:21:35.886] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:21:35.886] ubi2:animations is mounted. [2025-09-23 23:21:35.886] ubi1:textures is mounted. [2025-09-23 23:21:35.886] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:21:35.886] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:21:35.886] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:21:35.886] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:21:35.886] data.LB_FadeInType0=100 [2025-09-23 23:21:35.886] data.CHLH_FadeInType0=0 [2025-09-23 23:21:35.886] data.WU_FadeInDelay=0 [2025-09-23 23:21:35.886] max_time_out=0 [2025-09-23 23:21:35.886] No splash screen [2025-09-23 23:21:35.886] stop dss Done [2025-09-23 23:21:35.918] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:21:35.934] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:21:35.966] /dev/mem opened. [2025-09-23 23:21:35.966] Memory mapped at address 0xffff8fda1000. [2025-09-23 23:21:35.967] Read at address 0x00600018 (0xffff8fda1018): 0x00000000 [2025-09-23 23:21:35.967] Write at address 0x00600018 (0xffff8fda1018): 0x00400040, readback 0x00400040 [2025-09-23 23:21:36.222] Loaded PowerVR consumer services. [2025-09-23 23:21:36.254] Waiting data available... [2025-09-23 23:21:36.286] 512+0 records in [2025-09-23 23:21:36.286] 512+0 records out [2025-09-23 23:21:36.319] Starting syslogd/klogd: done [2025-09-23 23:21:36.335] DML Start [2025-09-23 23:21:36.478] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:21:36.750] DML res1: 0 [2025-09-23 23:21:37.214] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:21:37.214] Read Success [2025-09-23 23:21:37.230] Verifying certificate... [2025-09-23 23:21:37.470] Verified OK [2025-09-23 23:21:37.502] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:21:39.155] Verified OK [2025-09-23 23:21:39.155] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:21:39.790] Verified OK [2025-09-23 23:21:39.790] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:21:42.332] fs.protected_hardlinks = 1 [2025-09-23 23:21:42.348] fs.protected_symlinks = 1 [2025-09-23 23:21:42.348] kernel.modules_disabled = 1 [2025-09-23 23:21:42.557] [2025-09-23 23:21:42.557] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:21:43.747] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:21:51.505] SBL1:1210.0.1.0 [2025-09-23 23:21:51.553] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:21:53.120] SBL2:1210.0.1.0 [2025-09-23 23:21:53.167] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 23:21:53.280] j-A [2025-09-23 23:22:00.653] The R5 Autosar Classic is running [2025-09-23 23:22:00.653] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:22:00.653] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:22:01.261] INIT: version 2.96 booting [2025-09-23 23:22:01.373] INIT: Entering runlevel: 5 [2025-09-23 23:22:01.532] mtd32 attached [2025-09-23 23:22:01.532] mtd24 attached [2025-09-23 23:22:01.548] mtd28 attached [2025-09-23 23:22:01.596] RTNETLINK answers: File exists [2025-09-23 23:22:01.596] ubi0:dml_code is mounted. [2025-09-23 23:22:01.668] ubi2:animations is mounted. [2025-09-23 23:22:01.668] ubi1:textures is mounted. [2025-09-23 23:22:01.668] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:22:01.668] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:22:01.668] data.LB_FadeInType0=100 [2025-09-23 23:22:01.668] data.CHLH_FadeInType0=0 [2025-09-23 23:22:01.668] data.WU_FadeInDelay=0 [2025-09-23 23:22:01.668] max_time_out=0 [2025-09-23 23:22:01.668] No splash screen [2025-09-23 23:22:01.668] stop dss Done [2025-09-23 23:22:01.668] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:22:01.668] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:22:01.668] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:22:01.733] /dev/mem opened. [2025-09-23 23:22:01.733] Memory mapped at address 0xffffa3679000. [2025-09-23 23:22:01.733] Read at address 0x00600018 (0xffffa3679018): 0x00000000 [2025-09-23 23:22:01.733] Write at address 0x00600018 (0xffffa3679018): 0x00400040, readback 0x00400040 [2025-09-23 23:22:01.765] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:22:01.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:22:01.989] Loaded PowerVR consumer services. [2025-09-23 23:22:02.052] Waiting data available... [2025-09-23 23:22:02.068] 512+0 records in [2025-09-23 23:22:02.084] 512+0 records out [2025-09-23 23:22:02.100] Starting syslogd/klogd: done [2025-09-23 23:22:02.116] DML Start [2025-09-23 23:22:02.308] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:22:02.485] DML res1: 0 [2025-09-23 23:22:02.964] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:22:02.985] Read Success [2025-09-23 23:22:02.985] Verifying certificate... [2025-09-23 23:22:03.224] Verified OK [2025-09-23 23:22:03.257] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:22:04.887] Verified OK [2025-09-23 23:22:04.887] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:22:05.456] Verified OK [2025-09-23 23:22:05.456] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:22:07.886] fs.protected_hardlinks = 1 [2025-09-23 23:22:07.886] fs.protected_symlinks = 1 [2025-09-23 23:22:07.902] kernel.modules_disabled = 1 [2025-09-23 23:22:08.095] [2025-09-23 23:22:08.095] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:22:09.543] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:22:17.263] SBL1:1210.0.1.0 [2025-09-23 23:22:17.311] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:22:18.878] SBL2:1210.0.1.0 [2025-09-23 23:22:18.926] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:22:19.037] j-A [2025-09-23 23:22:26.376] The R5 Autosar Classic is running [2025-09-23 23:22:26.407] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:22:26.407] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:22:27.015] INIT: version 2.96 booting [2025-09-23 23:22:27.111] INIT: Entering runlevel: 5 [2025-09-23 23:22:27.270] mtd24 attached [2025-09-23 23:22:27.286] mtd32 attached [2025-09-23 23:22:27.286] mtd28 attached [2025-09-23 23:22:27.302] ubi0:textures is mounted. [2025-09-23 23:22:27.335] RTNETLINK answers: File exists [2025-09-23 23:22:27.383] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:22:27.383] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:22:27.383] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:22:27.383] ubi2:animations is mounted. [2025-09-23 23:22:27.383] ubi1:dml_code is mounted. [2025-09-23 23:22:27.383] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:22:27.383] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:22:27.383] data.LB_FadeInType0=100 [2025-09-23 23:22:27.383] data.CHLH_FadeInType0=0 [2025-09-23 23:22:27.404] data.WU_FadeInDelay=0 [2025-09-23 23:22:27.404] max_time_out=0 [2025-09-23 23:22:27.404] No splash screen [2025-09-23 23:22:27.404] stop dss Done [2025-09-23 23:22:27.436] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:22:27.451] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:22:27.467] /dev/mem opened. [2025-09-23 23:22:27.467] Memory mapped at address 0xffff9f934000. [2025-09-23 23:22:27.493] Read at address 0x00600018 (0xffff9f934018): 0x00000000 [2025-09-23 23:22:27.493] Write at address 0x00600018 (0xffff9f934018): 0x00400040, readback 0x00400040 [2025-09-23 23:22:27.669] Loaded PowerVR consumer services. [2025-09-23 23:22:27.766] Waiting data available... [2025-09-23 23:22:27.782] 512+0 records in [2025-09-23 23:22:27.782] 512+0 records out [2025-09-23 23:22:27.830] Starting syslogd/klogd: done [2025-09-23 23:22:27.845] DML Start [2025-09-23 23:22:28.006] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:22:28.213] DML res1: 0 [2025-09-23 23:22:28.693] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:22:28.709] Read Success [2025-09-23 23:22:28.709] Verifying certificate... [2025-09-23 23:22:28.965] Verified OK [2025-09-23 23:22:28.981] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:22:30.512] Verified OK [2025-09-23 23:22:30.512] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:22:31.115] Verified OK [2025-09-23 23:22:31.115] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:22:33.754] fs.protected_hardlinks = 1 [2025-09-23 23:22:33.770] fs.protected_symlinks = 1 [2025-09-23 23:22:33.770] kernel.modules_disabled = 1 [2025-09-23 23:22:33.977] [2025-09-23 23:22:33.977] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:22:35.305] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:22:43.015] SBL1:1210.0.1.0 [2025-09-23 23:22:43.062] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:22:44.630] SBL2:1210.0.1.0 [2025-09-23 23:22:44.677] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:22:44.773] j-A [2025-09-23 23:22:52.128] The R5 Autosar Classic is running [2025-09-23 23:22:52.153] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:22:52.153] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:22:52.760] INIT: version 2.96 booting [2025-09-23 23:22:52.873] INIT: Entering runlevel: 5 [2025-09-23 23:22:53.032] mtd24 attached [2025-09-23 23:22:53.032] mtd28 attached [2025-09-23 23:22:53.064] mtd32 attached [2025-09-23 23:22:53.064] ubi0:textures is mounted. [2025-09-23 23:22:53.096] RTNETLINK answers: File exists [2025-09-23 23:22:53.159] ubi1:animations is mounted. [2025-09-23 23:22:53.159] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:22:53.159] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:22:53.159] ubi2:dml_code is mounted. [2025-09-23 23:22:53.159] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:22:53.159] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:22:53.159] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:22:53.159] data.LB_FadeInType0=100 [2025-09-23 23:22:53.159] data.CHLH_FadeInType0=0 [2025-09-23 23:22:53.159] data.WU_FadeInDelay=0 [2025-09-23 23:22:53.159] max_time_out=0 [2025-09-23 23:22:53.159] No splash screen [2025-09-23 23:22:53.159] stop dss Done [2025-09-23 23:22:53.240] /dev/mem opened. [2025-09-23 23:22:53.240] Memory mapped at address 0xffff9bf60000. [2025-09-23 23:22:53.240] Read at address 0x00600018 (0xffff9bf60018): 0x00000000 [2025-09-23 23:22:53.240] Write at address 0x00600018 (0xffff9bf60018): 0x00400040, readback 0x00400040 [2025-09-23 23:22:53.240] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:22:53.240] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:22:53.352] Loaded PowerVR consumer services. [2025-09-23 23:22:53.496] Waiting data available... [2025-09-23 23:22:53.512] 512+0 records in [2025-09-23 23:22:53.512] 512+0 records out [2025-09-23 23:22:53.560] Starting syslogd/klogd: done [2025-09-23 23:22:53.576] DML Start [2025-09-23 23:22:53.768] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:22:53.992] DML res1: 0 [2025-09-23 23:22:54.416] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:22:54.416] Read Success [2025-09-23 23:22:54.416] Verifying certificate... [2025-09-23 23:22:54.624] Verified OK [2025-09-23 23:22:54.655] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:22:56.500] Verified OK [2025-09-23 23:22:56.500] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:22:56.948] Verified OK [2025-09-23 23:22:56.948] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:22:59.394] fs.protected_hardlinks = 1 [2025-09-23 23:22:59.421] fs.protected_symlinks = 1 [2025-09-23 23:22:59.421] kernel.modules_disabled = 1 [2025-09-23 23:22:59.597] [2025-09-23 23:22:59.597] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:23:01.052] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:23:08.761] SBL1:1210.0.1.0 [2025-09-23 23:23:08.809] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:23:10.377] SBL2:1210.0.1.0 [2025-09-23 23:23:10.425] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:23:10.536] j-A [2025-09-23 23:23:17.909] The R5 Autosar Classic is running [2025-09-23 23:23:17.909] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:23:17.909] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:23:18.517] INIT: version 2.96 booting [2025-09-23 23:23:18.629] INIT: Entering runlevel: 5 [2025-09-23 23:23:18.788] mtd24 attached [2025-09-23 23:23:18.788] mtd32 attached [2025-09-23 23:23:18.804] mtd28 attached [2025-09-23 23:23:18.836] ubi0:textures is mounted. [2025-09-23 23:23:18.852] RTNETLINK answers: File exists [2025-09-23 23:23:18.852] ubi1:dml_code is mounted. [2025-09-23 23:23:18.913] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:23:18.913] ubi2:animations is mounted. [2025-09-23 23:23:18.913] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:23:18.913] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:23:18.913] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:23:18.913] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:23:18.913] data.LB_FadeInType0=100 [2025-09-23 23:23:18.913] data.CHLH_FadeInType0=0 [2025-09-23 23:23:18.913] data.WU_FadeInDelay=0 [2025-09-23 23:23:18.913] max_time_out=0 [2025-09-23 23:23:18.913] No splash screen [2025-09-23 23:23:18.913] stop dss Done [2025-09-23 23:23:19.000] /dev/mem opened. [2025-09-23 23:23:19.000] Memory mapped at address 0xffff9a826000. [2025-09-23 23:23:19.000] Read at address 0x00600018 (0xffff9a826018): 0x00000000 [2025-09-23 23:23:19.000] Write at address 0x00600018 (0xffff9a826018): 0x00400040, readback 0x00400040 [2025-09-23 23:23:19.000] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:23:19.000] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:23:19.239] Loaded PowerVR consumer services. [2025-09-23 23:23:19.255] Waiting data available... [2025-09-23 23:23:19.287] 512+0 records in [2025-09-23 23:23:19.287] 512+0 records out [2025-09-23 23:23:19.303] Starting syslogd/klogd: done [2025-09-23 23:23:19.336] DML Start [2025-09-23 23:23:19.543] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:23:19.719] DML res1: 0 [2025-09-23 23:23:20.159] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:23:20.159] Read Success [2025-09-23 23:23:20.159] Verifying certificate... [2025-09-23 23:23:20.383] Verified OK [2025-09-23 23:23:20.399] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:23:22.086] Verified OK [2025-09-23 23:23:22.086] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:23:22.656] Verified OK [2025-09-23 23:23:22.656] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:23:25.198] fs.protected_hardlinks = 1 [2025-09-23 23:23:25.214] fs.protected_symlinks = 1 [2025-09-23 23:23:25.214] kernel.modules_disabled = 1 [2025-09-23 23:23:25.406] [2025-09-23 23:23:25.406] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:23:26.769] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:23:34.499] SBL1:1210.0.1.0 [2025-09-23 23:23:34.546] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:23:36.113] SBL2:1210.0.1.0 [2025-09-23 23:23:36.161] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:23:36.273] j-A [2025-09-23 23:23:43.612] The R5 Autosar Classic is running [2025-09-23 23:23:43.637] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:23:43.637] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:23:44.245] INIT: version 2.96 booting [2025-09-23 23:23:44.357] INIT: Entering runlevel: 5 [2025-09-23 23:23:44.500] mtd24 attached [2025-09-23 23:23:44.516] mtd28 attached [2025-09-23 23:23:44.532] mtd32 attached [2025-09-23 23:23:44.564] ubi0:textures is mounted. [2025-09-23 23:23:44.640] RTNETLINK answers: File exists [2025-09-23 23:23:44.640] ubi1:animations is mounted. [2025-09-23 23:23:44.640] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:23:44.640] ubi2:dml_code is mounted. [2025-09-23 23:23:44.640] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:23:44.640] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:23:44.640] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:23:44.640] data.LB_FadeInType0=100 [2025-09-23 23:23:44.640] data.CHLH_FadeInType0=0 [2025-09-23 23:23:44.640] data.WU_FadeInDelay=0 [2025-09-23 23:23:44.640] max_time_out=0 [2025-09-23 23:23:44.640] No splash screen [2025-09-23 23:23:44.640] stop dss Done [2025-09-23 23:23:44.640] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:23:44.688] /dev/mem opened. [2025-09-23 23:23:44.688] Memory mapped at address 0xffffb1ac0000. [2025-09-23 23:23:44.720] Read at address 0x00600018 (0xffffb1ac0018): 0x00000000 [2025-09-23 23:23:44.720] Write at address 0x00600018 (0xffffb1ac0018): 0x00400040, readback 0x00400040 [2025-09-23 23:23:44.720] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:23:44.720] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:23:44.815] Loaded PowerVR consumer services. [2025-09-23 23:23:44.992] Waiting data available... [2025-09-23 23:23:45.008] 512+0 records in [2025-09-23 23:23:45.008] 512+0 records out [2025-09-23 23:23:45.056] Starting syslogd/klogd: done [2025-09-23 23:23:45.072] DML Start [2025-09-23 23:23:45.263] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:23:45.487] DML res1: 0 [2025-09-23 23:23:45.900] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:23:45.900] Read Success [2025-09-23 23:23:45.900] Verifying certificate... [2025-09-23 23:23:46.123] Verified OK [2025-09-23 23:23:46.139] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:23:47.786] Verified OK [2025-09-23 23:23:47.803] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:23:48.437] Verified OK [2025-09-23 23:23:48.437] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:23:51.139] fs.protected_hardlinks = 1 [2025-09-23 23:23:51.155] fs.protected_symlinks = 1 [2025-09-23 23:23:51.155] kernel.modules_disabled = 1 [2025-09-23 23:23:51.363] [2025-09-23 23:23:51.363] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:23:52.558] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:24:00.248] SBL1:1210.0.1.0 [2025-09-23 23:24:00.280] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:24:01.863] SBL2:1210.0.1.0 [2025-09-23 23:24:01.895] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:24:02.007] j-A [2025-09-23 23:24:09.381] The R5 Autosar Classic is running [2025-09-23 23:24:09.381] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:24:09.381] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:24:09.988] INIT: version 2.96 booting [2025-09-23 23:24:10.100] INIT: Entering runlevel: 5 [2025-09-23 23:24:10.244] mtd24 attached [2025-09-23 23:24:10.260] mtd32 attached [2025-09-23 23:24:10.276] mtd28 attached [2025-09-23 23:24:10.307] RTNETLINK answers: File exists [2025-09-23 23:24:10.357] ubi0:textures is mounted. [2025-09-23 23:24:10.357] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:24:10.357] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:24:10.357] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:24:10.357] ubi1:dml_code is mounted. [2025-09-23 23:24:10.357] ubi2:animations is mounted. [2025-09-23 23:24:10.357] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:24:10.357] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:24:10.357] data.LB_FadeInType0=100 [2025-09-23 23:24:10.357] data.CHLH_FadeInType0=0 [2025-09-23 23:24:10.378] data.WU_FadeInDelay=0 [2025-09-23 23:24:10.378] max_time_out=0 [2025-09-23 23:24:10.378] No splash screen [2025-09-23 23:24:10.378] stop dss Done [2025-09-23 23:24:10.452] /dev/mem opened. [2025-09-23 23:24:10.452] Memory mapped at address 0xffff9f8b3000. [2025-09-23 23:24:10.452] Read at address 0x00600018 (0xffff9f8b3018): 0x00000000 [2025-09-23 23:24:10.452] Write at address 0x00600018 (0xffff9f8b3018): 0x00400040, readback 0x00400040 [2025-09-23 23:24:10.452] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:24:10.468] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:24:10.691] Loaded PowerVR consumer services. [2025-09-23 23:24:10.707] Waiting data available... [2025-09-23 23:24:10.739] 512+0 records in [2025-09-23 23:24:10.755] 512+0 records out [2025-09-23 23:24:10.771] Starting syslogd/klogd: done [2025-09-23 23:24:10.787] DML Start [2025-09-23 23:24:10.964] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:24:11.155] DML res1: 0 [2025-09-23 23:24:11.639] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:24:11.639] Read Success [2025-09-23 23:24:11.639] Verifying certificate... [2025-09-23 23:24:11.927] Verified OK [2025-09-23 23:24:11.943] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:24:13.750] Verified OK [2025-09-23 23:24:13.750] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:24:14.225] Verified OK [2025-09-23 23:24:14.225] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:24:16.544] fs.protected_hardlinks = 1 [2025-09-23 23:24:16.572] fs.protected_symlinks = 1 [2025-09-23 23:24:16.572] kernel.modules_disabled = 1 [2025-09-23 23:24:16.763] [2025-09-23 23:24:16.763] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:24:18.184] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:24:25.984] SBL1:1210.0.1.0 [2025-09-23 23:24:26.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:24:27.600] SBL2:1210.0.1.0 [2025-09-23 23:24:27.648] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:24:27.760] j-A [2025-09-23 23:24:35.099] The R5 Autosar Classic is running [2025-09-23 23:24:35.124] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:24:35.124] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:24:35.732] INIT: version 2.96 booting [2025-09-23 23:24:35.844] INIT: Entering runlevel: 5 [2025-09-23 23:24:36.004] mtd24 attached [2025-09-23 23:24:36.004] mtd28 attached [2025-09-23 23:24:36.020] mtd32 attached [2025-09-23 23:24:36.068] ubi0:textures is mounted. [2025-09-23 23:24:36.135] ubi1:animations is mounted. [2025-09-23 23:24:36.135] RTNETLINK answers: File exists [2025-09-23 23:24:36.135] ubi2:dml_code is mounted. [2025-09-23 23:24:36.135] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:24:36.135] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:24:36.135] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:24:36.135] data.LB_FadeInType0=100 [2025-09-23 23:24:36.135] data.CHLH_FadeInType0=0 [2025-09-23 23:24:36.135] data.WU_FadeInDelay=0 [2025-09-23 23:24:36.135] max_time_out=0 [2025-09-23 23:24:36.135] No splash screen [2025-09-23 23:24:36.135] stop dss Done [2025-09-23 23:24:36.135] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:24:36.135] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:24:36.167] /dev/mem opened. [2025-09-23 23:24:36.217] Memory mapped at address 0xffff882a8000. [2025-09-23 23:24:36.217] Read at address 0x00600018 (0xffff882a8018): 0x00000000 [2025-09-23 23:24:36.217] Write at address 0x00600018 (0xffff882a8018): 0x00400040, readback 0x00400040 [2025-09-23 23:24:36.217] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:24:36.217] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:24:36.501] Waiting data available... [2025-09-23 23:24:36.501] Loaded PowerVR consumer services. [2025-09-23 23:24:36.533] 512+0 records in [2025-09-23 23:24:36.533] 512+0 records out [2025-09-23 23:24:36.565] Starting syslogd/klogd: done [2025-09-23 23:24:36.581] DML Start [2025-09-23 23:24:36.756] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:24:36.996] DML res1: 0 [2025-09-23 23:24:37.412] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:24:37.433] Read Success [2025-09-23 23:24:37.433] Verifying certificate... [2025-09-23 23:24:37.657] Verified OK [2025-09-23 23:24:37.673] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:24:39.219] Verified OK [2025-09-23 23:24:39.219] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:24:39.824] Verified OK [2025-09-23 23:24:39.824] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:24:42.574] fs.protected_hardlinks = 1 [2025-09-23 23:24:42.590] fs.protected_symlinks = 1 [2025-09-23 23:24:42.590] kernel.modules_disabled = 1 [2025-09-23 23:24:42.782] [2025-09-23 23:24:42.782] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:24:44.009] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:24:51.760] SBL1:1210.0.1.0 [2025-09-23 23:24:51.808] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:24:53.374] SBL2:1210.0.1.0 [2025-09-23 23:24:53.422] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:24:53.518] j-A [2025-09-23 23:25:00.875] The R5 Autosar Classic is running [2025-09-23 23:25:00.899] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:25:00.899] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:25:01.507] INIT: version 2.96 booting [2025-09-23 23:25:01.618] INIT: Entering runlevel: 5 [2025-09-23 23:25:01.762] mtd24 attached [2025-09-23 23:25:01.778] mtd28 attached [2025-09-23 23:25:01.778] mtd32 attached [2025-09-23 23:25:01.894] RTNETLINK answers: File exists [2025-09-23 23:25:01.894] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:25:01.894] ubi1:animations is mounted. [2025-09-23 23:25:01.894] ubi0:textures is mounted. [2025-09-23 23:25:01.894] ubi2:dml_code is mounted. [2025-09-23 23:25:01.894] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:25:01.894] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:25:01.894] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:25:01.894] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:25:01.894] data.LB_FadeInType0=100 [2025-09-23 23:25:01.894] data.CHLH_FadeInType0=0 [2025-09-23 23:25:01.894] data.WU_FadeInDelay=0 [2025-09-23 23:25:01.894] max_time_out=0 [2025-09-23 23:25:01.894] No splash screen [2025-09-23 23:25:01.894] stop dss Done [2025-09-23 23:25:01.958] /dev/mem opened. [2025-09-23 23:25:01.958] Memory mapped at address 0xffff92ea3000. [2025-09-23 23:25:01.958] Read at address 0x00600018 (0xffff92ea3018): 0x00000000 [2025-09-23 23:25:01.958] Write at address 0x00600018 (0xffff92ea3018): 0x00400040, readback 0x00400040 [2025-09-23 23:25:01.958] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:25:01.974] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:25:02.086] Loaded PowerVR consumer services. [2025-09-23 23:25:02.246] Waiting data available... [2025-09-23 23:25:02.262] 512+0 records in [2025-09-23 23:25:02.262] 512+0 records out [2025-09-23 23:25:02.310] Starting syslogd/klogd: done [2025-09-23 23:25:02.326] DML Start [2025-09-23 23:25:02.518] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:25:02.758] DML res1: 0 [2025-09-23 23:25:03.136] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:25:03.136] Read Success [2025-09-23 23:25:03.136] Verifying certificate... [2025-09-23 23:25:03.375] Verified OK [2025-09-23 23:25:03.391] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:25:05.048] Verified OK [2025-09-23 23:25:05.048] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:25:05.638] Verified OK [2025-09-23 23:25:05.638] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:25:08.275] fs.protected_hardlinks = 1 [2025-09-23 23:25:08.275] fs.protected_symlinks = 1 [2025-09-23 23:25:08.275] kernel.modules_disabled = 1 [2025-09-23 23:25:08.466] [2025-09-23 23:25:08.466] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:25:09.753] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:25:17.516] SBL1:1210.0.1.0 [2025-09-23 23:25:17.564] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:25:19.132] SBL2:1210.0.1.0 [2025-09-23 23:25:19.179] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:25:19.291] j-A [2025-09-23 23:25:26.632] The R5 Autosar Classic is running [2025-09-23 23:25:26.657] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:25:26.657] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:25:27.265] INIT: version 2.96 booting [2025-09-23 23:25:27.376] INIT: Entering runlevel: 5 [2025-09-23 23:25:27.520] mtd24 attached [2025-09-23 23:25:27.536] mtd28 attached [2025-09-23 23:25:27.552] mtd32 attached [2025-09-23 23:25:27.600] ubi0:textures is mounted. [2025-09-23 23:25:27.600] RTNETLINK answers: File exists [2025-09-23 23:25:27.660] ubi1:animations is mounted. [2025-09-23 23:25:27.660] ubi2:dml_code is mounted. [2025-09-23 23:25:27.660] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:25:27.660] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:25:27.660] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:25:27.660] data.LB_FadeInType0=100 [2025-09-23 23:25:27.660] data.CHLH_FadeInType0=0 [2025-09-23 23:25:27.660] data.WU_FadeInDelay=0 [2025-09-23 23:25:27.660] max_time_out=0 [2025-09-23 23:25:27.660] No splash screen [2025-09-23 23:25:27.660] stop dss Done [2025-09-23 23:25:27.660] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:25:27.660] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:25:27.692] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:25:27.730] /dev/mem opened. [2025-09-23 23:25:27.730] Memory mapped at address 0xffffa2cf5000. [2025-09-23 23:25:27.730] Read at address 0x00600018 (0xffffa2cf5018): 0x00000000 [2025-09-23 23:25:27.730] Write at address 0x00600018 (0xffffa2cf5018): 0x00400040, readback 0x00400040 [2025-09-23 23:25:27.730] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:25:27.841] Loaded PowerVR consumer services. [2025-09-23 23:25:28.018] Waiting data available... [2025-09-23 23:25:28.050] 512+0 records in [2025-09-23 23:25:28.050] 512+0 records out [2025-09-23 23:25:28.065] Starting syslogd/klogd: done [2025-09-23 23:25:28.097] DML Start [2025-09-23 23:25:28.273] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:25:28.481] DML res1: 0 [2025-09-23 23:25:28.960] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:25:28.960] Read Success [2025-09-23 23:25:28.960] Verifying certificate... [2025-09-23 23:25:29.215] Verified OK [2025-09-23 23:25:29.232] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:25:30.933] Verified OK [2025-09-23 23:25:30.933] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:25:31.492] Verified OK [2025-09-23 23:25:31.492] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:25:34.018] fs.protected_hardlinks = 1 [2025-09-23 23:25:34.034] fs.protected_symlinks = 1 [2025-09-23 23:25:34.034] kernel.modules_disabled = 1 [2025-09-23 23:25:34.226] [2025-09-23 23:25:34.226] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:25:35.527] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:25:43.280] SBL1:1210.0.1.0 [2025-09-23 23:25:43.328] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:25:44.894] SBL2:1210.0.1.0 [2025-09-23 23:25:44.942] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:25:45.055] j-A [2025-09-23 23:25:52.395] The R5 Autosar Classic is running [2025-09-23 23:25:52.420] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:25:52.420] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:25:53.027] INIT: version 2.96 booting [2025-09-23 23:25:53.140] INIT: Entering runlevel: 5 [2025-09-23 23:25:53.300] mtd28 attached [2025-09-23 23:25:53.300] mtd24 attached [2025-09-23 23:25:53.316] mtd32 attached [2025-09-23 23:25:53.364] ubi0:animations is mounted. [2025-09-23 23:25:53.364] RTNETLINK answers: File exists [2025-09-23 23:25:53.380] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:25:53.380] ubi1:textures is mounted. [2025-09-23 23:25:53.428] ubi2:dml_code is mounted. [2025-09-23 23:25:53.428] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:25:53.428] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:25:53.428] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:25:53.428] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:25:53.428] data.LB_FadeInType0=100 [2025-09-23 23:25:53.428] data.CHLH_FadeInType0=0 [2025-09-23 23:25:53.428] data.WU_FadeInDelay=0 [2025-09-23 23:25:53.428] max_time_out=0 [2025-09-23 23:25:53.428] No splash screen [2025-09-23 23:25:53.428] stop dss Done [2025-09-23 23:25:53.507] /dev/mem opened. [2025-09-23 23:25:53.507] Memory mapped at address 0xffff8836e000. [2025-09-23 23:25:53.507] Read at address 0x00600018 (0xffff8836e018): 0x00000000 [2025-09-23 23:25:53.507] Write at address 0x00600018 (0xffff8836e018): 0x00400040, readback 0x00400040 [2025-09-23 23:25:53.507] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:25:53.507] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:25:53.620] Loaded PowerVR consumer services. [2025-09-23 23:25:53.763] Waiting data available... [2025-09-23 23:25:53.779] 512+0 records in [2025-09-23 23:25:53.795] 512+0 records out [2025-09-23 23:25:53.811] Starting syslogd/klogd: done [2025-09-23 23:25:53.827] DML Start [2025-09-23 23:25:54.019] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:25:54.211] DML res1: 0 [2025-09-23 23:25:54.658] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:25:54.658] Read Success [2025-09-23 23:25:54.658] Verifying certificate... [2025-09-23 23:25:54.881] Verified OK [2025-09-23 23:25:54.898] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:25:56.575] Verified OK [2025-09-23 23:25:56.575] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:25:57.167] Verified OK [2025-09-23 23:25:57.183] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:25:59.741] fs.protected_hardlinks = 1 [2025-09-23 23:25:59.769] fs.protected_symlinks = 1 [2025-09-23 23:25:59.769] kernel.modules_disabled = 1 [2025-09-23 23:25:59.946] [2025-09-23 23:25:59.946] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:26:01.238] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:26:09.049] SBL1:1210.0.1.0 [2025-09-23 23:26:09.081] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:26:10.664] SBL2:1210.0.1.0 [2025-09-23 23:26:10.696] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:26:10.808] j-A [2025-09-23 23:26:18.183] The R5 Autosar Classic is running [2025-09-23 23:26:18.183] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:26:18.183] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:26:18.790] INIT: version 2.96 booting [2025-09-23 23:26:18.902] INIT: Entering runlevel: 5 [2025-09-23 23:26:19.062] mtd24 attached [2025-09-23 23:26:19.062] mtd28 attached [2025-09-23 23:26:19.078] mtd32 attached [2025-09-23 23:26:19.110] ubi0:textures is mounted. [2025-09-23 23:26:19.126] ubi1:animations is mounted. [2025-09-23 23:26:19.188] ubi2:dml_code is mounted. [2025-09-23 23:26:19.188] RTNETLINK answers: File exists [2025-09-23 23:26:19.188] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:26:19.188] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:26:19.188] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:26:19.188] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:26:19.188] data.LB_FadeInType0=100 [2025-09-23 23:26:19.188] data.CHLH_FadeInType0=0 [2025-09-23 23:26:19.188] data.WU_FadeInDelay=0 [2025-09-23 23:26:19.188] max_time_out=0 [2025-09-23 23:26:19.188] No splash screen [2025-09-23 23:26:19.188] stop dss Done [2025-09-23 23:26:19.188] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:26:19.253] /dev/mem opened. [2025-09-23 23:26:19.253] Memory mapped at address 0xffff83dd0000. [2025-09-23 23:26:19.253] Read at address 0x00600018 (0xffff83dd0018): 0x00000000 [2025-09-23 23:26:19.253] Write at address 0x00600018 (0xffff83dd0018): 0x00400040, readback 0x00400040 [2025-09-23 23:26:19.269] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:26:19.285] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:26:19.381] Loaded PowerVR consumer services. [2025-09-23 23:26:19.525] Waiting data available... [2025-09-23 23:26:19.541] 512+0 records in [2025-09-23 23:26:19.541] 512+0 records out [2025-09-23 23:26:19.589] Starting syslogd/klogd: done [2025-09-23 23:26:19.605] DML Start [2025-09-23 23:26:19.764] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:26:20.020] DML res1: 0 [2025-09-23 23:26:20.464] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:26:20.464] Read Success [2025-09-23 23:26:20.464] Verifying certificate... [2025-09-23 23:26:20.751] Verified OK [2025-09-23 23:26:20.783] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:26:22.350] Verified OK [2025-09-23 23:26:22.371] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:26:23.035] Verified OK [2025-09-23 23:26:23.035] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:26:25.705] fs.protected_hardlinks = 1 [2025-09-23 23:26:25.706] fs.protected_symlinks = 1 [2025-09-23 23:26:25.722] kernel.modules_disabled = 1 [2025-09-23 23:26:25.913] [2025-09-23 23:26:25.913] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:26:27.048] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:26:34.813] SBL1:1210.0.1.0 [2025-09-23 23:26:34.845] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:26:36.428] SBL2:1210.0.1.0 [2025-09-23 23:26:36.460] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 23:26:36.572] j-A [2025-09-23 23:26:43.927] The R5 Autosar Classic is running [2025-09-23 23:26:43.927] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:26:43.947] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:26:44.556] INIT: version 2.96 booting [2025-09-23 23:26:44.667] INIT: Entering runlevel: 5 [2025-09-23 23:26:44.827] mtd32 attached [2025-09-23 23:26:44.827] mtd28 attached [2025-09-23 23:26:44.843] mtd24 attached [2025-09-23 23:26:44.891] RTNETLINK answers: File exists [2025-09-23 23:26:44.891] ubi0:dml_code is mounted. [2025-09-23 23:26:44.956] ubi1:animations is mounted. [2025-09-23 23:26:44.956] ubi2:textures is mounted. [2025-09-23 23:26:44.956] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:26:44.956] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:26:44.956] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:26:44.956] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:26:44.956] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:26:44.956] data.LB_FadeInType0=100 [2025-09-23 23:26:44.956] data.CHLH_FadeInType0=0 [2025-09-23 23:26:44.956] data.WU_FadeInDelay=0 [2025-09-23 23:26:44.956] max_time_out=0 [2025-09-23 23:26:44.956] No splash screen [2025-09-23 23:26:44.956] stop dss Done [2025-09-23 23:26:44.971] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:26:45.000] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:26:45.000] /dev/mem opened. [2025-09-23 23:26:45.032] Memory mapped at address 0xffffa390c000. [2025-09-23 23:26:45.032] Read at address 0x00600018 (0xffffa390c018): 0x00000000 [2025-09-23 23:26:45.032] Write at address 0x00600018 (0xffffa390c018): 0x00400040, readback 0x00400040 [2025-09-23 23:26:45.272] Waiting data available... [2025-09-23 23:26:45.288] Loaded PowerVR consumer services. [2025-09-23 23:26:45.320] 512+0 records in [2025-09-23 23:26:45.320] 512+0 records out [2025-09-23 23:26:45.368] Starting syslogd/klogd: done [2025-09-23 23:26:45.384] DML Start [2025-09-23 23:26:45.559] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:26:45.800] DML res1: 0 [2025-09-23 23:26:46.181] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:26:46.181] Read Success [2025-09-23 23:26:46.181] Verifying certificate... [2025-09-23 23:26:46.453] Verified OK [2025-09-23 23:26:46.469] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:26:48.133] Verified OK [2025-09-23 23:26:48.133] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:26:48.793] Verified OK [2025-09-23 23:26:48.793] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:26:51.383] fs.protected_hardlinks = 1 [2025-09-23 23:26:51.383] fs.protected_symlinks = 1 [2025-09-23 23:26:51.399] kernel.modules_disabled = 1 [2025-09-23 23:26:51.592] [2025-09-23 23:26:51.592] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:26:52.832] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:27:00.585] SBL1:1210.0.1.0 [2025-09-23 23:27:00.633] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:27:02.200] SBL2:1210.0.1.0 [2025-09-23 23:27:02.248] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:27:02.344] j-A [2025-09-23 23:27:09.698] The R5 Autosar Classic is running [2025-09-23 23:27:09.722] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:27:09.722] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:27:10.329] INIT: version 2.96 booting [2025-09-23 23:27:10.441] INIT: Entering runlevel: 5 [2025-09-23 23:27:10.601] mtd24 attached [2025-09-23 23:27:10.617] mtd32 attached [2025-09-23 23:27:10.633] mtd28 attached [2025-09-23 23:27:10.633] ubi0:textures is mounted. [2025-09-23 23:27:10.665] ubi1:dml_code is mounted. [2025-09-23 23:27:10.665] RTNETLINK answers: File exists [2025-09-23 23:27:10.706] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:27:10.706] ubi2:animations is mounted. [2025-09-23 23:27:10.706] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:27:10.706] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:27:10.706] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:27:10.706] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:27:10.726] data.LB_FadeInType0=100 [2025-09-23 23:27:10.726] data.CHLH_FadeInType0=0 [2025-09-23 23:27:10.726] data.WU_FadeInDelay=0 [2025-09-23 23:27:10.726] max_time_out=0 [2025-09-23 23:27:10.726] No splash screen [2025-09-23 23:27:10.726] stop dss Done [2025-09-23 23:27:10.742] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:27:10.774] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:27:10.815] /dev/mem opened. [2025-09-23 23:27:10.815] Memory mapped at address 0xffffa5f7a000. [2025-09-23 23:27:10.815] Read at address 0x00600018 (0xffffa5f7a018): 0x00000000 [2025-09-23 23:27:10.815] Write at address 0x00600018 (0xffffa5f7a018): 0x00400040, readback 0x00400040 [2025-09-23 23:27:10.958] Loaded PowerVR consumer services. [2025-09-23 23:27:11.087] Waiting data available... [2025-09-23 23:27:11.102] 512+0 records in [2025-09-23 23:27:11.119] 512+0 records out [2025-09-23 23:27:11.166] Starting syslogd/klogd: done [2025-09-23 23:27:11.182] DML Start [2025-09-23 23:27:11.359] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:27:11.567] DML res1: 0 [2025-09-23 23:27:12.014] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:27:12.035] Read Success [2025-09-23 23:27:12.035] Verifying certificate... [2025-09-23 23:27:12.323] Verified OK [2025-09-23 23:27:12.323] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:27:13.952] Verified OK [2025-09-23 23:27:13.952] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:27:14.590] Verified OK [2025-09-23 23:27:14.590] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:27:17.150] fs.protected_hardlinks = 1 [2025-09-23 23:27:17.150] fs.protected_symlinks = 1 [2025-09-23 23:27:17.165] kernel.modules_disabled = 1 [2025-09-23 23:27:17.357] [2025-09-23 23:27:17.357] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:27:18.595] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:27:26.371] SBL1:1210.0.1.0 [2025-09-23 23:27:26.403] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:27:27.986] SBL2:1210.0.1.0 [2025-09-23 23:27:28.018] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:27:28.130] j-A [2025-09-23 23:27:35.505] The R5 Autosar Classic is running [2025-09-23 23:27:35.505] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:27:35.505] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:27:36.112] INIT: version 2.96 booting [2025-09-23 23:27:36.224] INIT: Entering runlevel: 5 [2025-09-23 23:27:36.368] mtd24 attached [2025-09-23 23:27:36.384] mtd28 attached [2025-09-23 23:27:36.400] mtd32 attached [2025-09-23 23:27:36.482] ubi1:animations is mounted. [2025-09-23 23:27:36.482] RTNETLINK answers: File exists [2025-09-23 23:27:36.482] ubi0:textures is mounted. [2025-09-23 23:27:36.482] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:27:36.482] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:27:36.482] ubi2:dml_code is mounted. [2025-09-23 23:27:36.482] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:27:36.482] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:27:36.482] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:27:36.506] data.LB_FadeInType0=100 [2025-09-23 23:27:36.506] data.CHLH_FadeInType0=0 [2025-09-23 23:27:36.506] data.WU_FadeInDelay=0 [2025-09-23 23:27:36.506] max_time_out=0 [2025-09-23 23:27:36.506] No splash screen [2025-09-23 23:27:36.506] stop dss Done [2025-09-23 23:27:36.538] /dev/mem opened. [2025-09-23 23:27:36.570] Memory mapped at address 0xffffbf553000. [2025-09-23 23:27:36.570] Read at address 0x00600018 (0xffffbf553018): 0x00000000 [2025-09-23 23:27:36.570] Write at address 0x00600018 (0xffffbf553018): 0x00400040, readback 0x00400040 [2025-09-23 23:27:36.570] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:27:36.570] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:27:36.682] Loaded PowerVR consumer services. [2025-09-23 23:27:36.858] Waiting data available... [2025-09-23 23:27:36.890] 512+0 records in [2025-09-23 23:27:36.890] 512+0 records out [2025-09-23 23:27:36.906] Starting syslogd/klogd: done [2025-09-23 23:27:36.922] DML Start [2025-09-23 23:27:37.081] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:27:37.290] DML res1: 0 [2025-09-23 23:27:37.768] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:27:37.768] Read Success [2025-09-23 23:27:37.768] Verifying certificate... [2025-09-23 23:27:38.056] Verified OK [2025-09-23 23:27:38.072] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:27:39.847] Verified OK [2025-09-23 23:27:39.847] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:27:40.374] Verified OK [2025-09-23 23:27:40.374] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:27:42.835] fs.protected_hardlinks = 1 [2025-09-23 23:27:42.851] fs.protected_symlinks = 1 [2025-09-23 23:27:42.867] kernel.modules_disabled = 1 [2025-09-23 23:27:43.059] [2025-09-23 23:27:43.059] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:27:44.353] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:27:52.113] SBL1:1210.0.1.0 [2025-09-23 23:27:52.145] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:27:53.728] SBL2:1210.0.1.0 [2025-09-23 23:27:53.759] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:27:53.871] j-A [2025-09-23 23:28:01.227] The R5 Autosar Classic is running [2025-09-23 23:28:01.227] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:28:01.248] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:28:01.855] INIT: version 2.96 booting [2025-09-23 23:28:01.966] INIT: Entering runlevel: 5 [2025-09-23 23:28:02.111] mtd24 attached [2025-09-23 23:28:02.127] mtd28 attached [2025-09-23 23:28:02.143] mtd32 attached [2025-09-23 23:28:02.175] ubi1:animations is mounted. [2025-09-23 23:28:02.246] RTNETLINK answers: File exists [2025-09-23 23:28:02.246] ubi0:textures is mounted. [2025-09-23 23:28:02.246] ubi2:dml_code is mounted. [2025-09-23 23:28:02.246] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:28:02.246] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:28:02.246] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:28:02.246] data.LB_FadeInType0=100 [2025-09-23 23:28:02.246] data.CHLH_FadeInType0=0 [2025-09-23 23:28:02.246] data.WU_FadeInDelay=0 [2025-09-23 23:28:02.246] max_time_out=0 [2025-09-23 23:28:02.246] No splash screen [2025-09-23 23:28:02.246] stop dss Done [2025-09-23 23:28:02.246] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:28:02.246] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:28:02.315] /dev/mem opened. [2025-09-23 23:28:02.315] Memory mapped at address 0xffff95eb6000. [2025-09-23 23:28:02.315] Read at address 0x00600018 (0xffff95eb6018): 0x00000000 [2025-09-23 23:28:02.315] Write at address 0x00600018 (0xffff95eb6018): 0x00400040, readback 0x00400040 [2025-09-23 23:28:02.315] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:28:02.331] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:28:02.571] Loaded PowerVR consumer services. [2025-09-23 23:28:02.587] Waiting data available... [2025-09-23 23:28:02.619] 512+0 records in [2025-09-23 23:28:02.619] 512+0 records out [2025-09-23 23:28:02.651] Starting syslogd/klogd: done [2025-09-23 23:28:02.667] DML Start [2025-09-23 23:28:02.811] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:28:03.035] DML res1: 0 [2025-09-23 23:28:03.541] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:28:03.541] Read Success [2025-09-23 23:28:03.541] Verifying certificate... [2025-09-23 23:28:03.829] Verified OK [2025-09-23 23:28:03.845] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:28:05.443] Verified OK [2025-09-23 23:28:05.443] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:28:06.014] Verified OK [2025-09-23 23:28:06.014] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:28:08.668] fs.protected_hardlinks = 1 [2025-09-23 23:28:08.684] fs.protected_symlinks = 1 [2025-09-23 23:28:08.684] kernel.modules_disabled = 1 [2025-09-23 23:28:08.891] [2025-09-23 23:28:08.891] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:28:10.086] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:28:17.871] SBL1:1210.0.1.0 [2025-09-23 23:28:17.919] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 23:28:19.485] SBL2:1210.0.1.0 [2025-09-23 23:28:19.533] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:28:19.646] j-A [2025-09-23 23:28:26.985] The R5 Autosar Classic is running [2025-09-23 23:28:27.010] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:28:27.010] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:28:27.618] INIT: version 2.96 booting [2025-09-23 23:28:27.729] INIT: Entering runlevel: 5 [2025-09-23 23:28:27.890] mtd28 attached [2025-09-23 23:28:27.890] mtd32 attached [2025-09-23 23:28:27.906] mtd24 attached [2025-09-23 23:28:27.992] RTNETLINK answers: File exists [2025-09-23 23:28:27.992] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:28:27.992] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:28:27.992] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:28:27.992] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:28:27.992] ubi0:animations is mounted. [2025-09-23 23:28:27.992] ubi2:textures is mounted. [2025-09-23 23:28:27.992] ubi1:dml_code is mounted. [2025-09-23 23:28:27.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:28:28.018] data.LB_FadeInType0=100 [2025-09-23 23:28:28.018] data.CHLH_FadeInType0=0 [2025-09-23 23:28:28.018] data.WU_FadeInDelay=0 [2025-09-23 23:28:28.018] max_time_out=0 [2025-09-23 23:28:28.018] No splash screen [2025-09-23 23:28:28.018] stop dss Done [2025-09-23 23:28:28.034] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:28:28.056] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:28:28.072] /dev/mem opened. [2025-09-23 23:28:28.072] Memory mapped at address 0xffff86e0b000. [2025-09-23 23:28:28.098] Read at address 0x00600018 (0xffff86e0b018): 0x00000000 [2025-09-23 23:28:28.098] Write at address 0x00600018 (0xffff86e0b018): 0x00400040, readback 0x00400040 [2025-09-23 23:28:28.370] Loaded PowerVR consumer services. [2025-09-23 23:28:28.386] Waiting data available... [2025-09-23 23:28:28.418] 512+0 records in [2025-09-23 23:28:28.418] 512+0 records out [2025-09-23 23:28:28.450] Starting syslogd/klogd: done [2025-09-23 23:28:28.466] DML Start [2025-09-23 23:28:28.657] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:28:28.850] DML res1: 0 [2025-09-23 23:28:29.249] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:28:29.266] Read Success [2025-09-23 23:28:29.266] Verifying certificate... [2025-09-23 23:28:29.537] Verified OK [2025-09-23 23:28:29.537] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:28:31.129] Verified OK [2025-09-23 23:28:31.129] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:28:31.730] Verified OK [2025-09-23 23:28:31.730] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:28:34.428] fs.protected_hardlinks = 1 [2025-09-23 23:28:34.428] fs.protected_symlinks = 1 [2025-09-23 23:28:34.428] kernel.modules_disabled = 1 [2025-09-23 23:28:34.604] [2025-09-23 23:28:34.604] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:28:35.893] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:28:43.755] SBL1:1210.0.1.0 [2025-09-23 23:28:43.803] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:28:45.370] SBL2:1210.0.1.0 [2025-09-23 23:28:45.417] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:28:45.530] j-A [2025-09-23 23:28:52.902] The R5 Autosar Classic is running [2025-09-23 23:28:52.902] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:28:52.902] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:28:53.509] INIT: version 2.96 booting [2025-09-23 23:28:53.621] INIT: Entering runlevel: 5 [2025-09-23 23:28:53.781] mtd24 attached [2025-09-23 23:28:53.781] mtd28 attached [2025-09-23 23:28:53.797] mtd32 attached [2025-09-23 23:28:53.845] ubi0:textures is mounted. [2025-09-23 23:28:53.911] RTNETLINK answers: File exists [2025-09-23 23:28:53.911] ubi1:animations is mounted. [2025-09-23 23:28:53.911] ubi2:dml_code is mounted. [2025-09-23 23:28:53.911] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:28:53.911] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:28:53.911] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:28:53.911] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:28:53.911] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:28:53.911] data.LB_FadeInType0=100 [2025-09-23 23:28:53.911] data.CHLH_FadeInType0=0 [2025-09-23 23:28:53.911] data.WU_FadeInDelay=0 [2025-09-23 23:28:53.911] max_time_out=0 [2025-09-23 23:28:53.911] No splash screen [2025-09-23 23:28:53.911] stop dss Done [2025-09-23 23:28:53.984] /dev/mem opened. [2025-09-23 23:28:53.984] Memory mapped at address 0xffffb606f000. [2025-09-23 23:28:53.984] Read at address 0x00600018 (0xffffb606f018): 0x00000000 [2025-09-23 23:28:53.984] Write at address 0x00600018 (0xffffb606f018): 0x00400040, readback 0x00400040 [2025-09-23 23:28:53.984] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:28:54.000] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:28:54.240] Loaded PowerVR consumer services. [2025-09-23 23:28:54.303] Waiting data available... [2025-09-23 23:28:54.335] 512+0 records in [2025-09-23 23:28:54.335] 512+0 records out [2025-09-23 23:28:54.367] Starting syslogd/klogd: done [2025-09-23 23:28:54.383] DML Start [2025-09-23 23:28:54.543] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:28:54.784] DML res1: 0 [2025-09-23 23:28:55.192] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:28:55.192] Read Success [2025-09-23 23:28:55.192] Verifying certificate... [2025-09-23 23:28:55.464] Verified OK [2025-09-23 23:28:55.480] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:28:57.190] Verified OK [2025-09-23 23:28:57.190] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:28:57.829] Verified OK [2025-09-23 23:28:57.829] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:29:00.322] fs.protected_hardlinks = 1 [2025-09-23 23:29:00.322] fs.protected_symlinks = 1 [2025-09-23 23:29:00.338] kernel.modules_disabled = 1 [2025-09-23 23:29:00.530] [2025-09-23 23:29:00.530] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:29:01.808] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:29:09.640] SBL1:1210.0.1.0 [2025-09-23 23:29:09.689] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:29:11.255] SBL2:1210.0.1.0 [2025-09-23 23:29:11.303] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:29:11.399] j-A [2025-09-23 23:29:18.755] The R5 Autosar Classic is running [2025-09-23 23:29:18.778] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:29:18.778] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:29:19.385] INIT: version 2.96 booting [2025-09-23 23:29:19.497] INIT: Entering runlevel: 5 [2025-09-23 23:29:19.657] mtd24 attached [2025-09-23 23:29:19.673] mtd28 attached [2025-09-23 23:29:19.673] mtd32 attached [2025-09-23 23:29:19.705] ubi0:textures is mounted. [2025-09-23 23:29:19.737] RTNETLINK answers: File exists [2025-09-23 23:29:19.737] ubi1:animations is mounted. [2025-09-23 23:29:19.790] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:29:19.790] ubi2:dml_code is mounted. [2025-09-23 23:29:19.790] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:29:19.790] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:29:19.790] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:29:19.790] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:29:19.790] data.LB_FadeInType0=100 [2025-09-23 23:29:19.790] data.CHLH_FadeInType0=0 [2025-09-23 23:29:19.790] data.WU_FadeInDelay=0 [2025-09-23 23:29:19.790] max_time_out=0 [2025-09-23 23:29:19.790] No splash screen [2025-09-23 23:29:19.790] stop dss Done [2025-09-23 23:29:19.838] /dev/mem opened. [2025-09-23 23:29:19.838] Memory mapped at address 0xffffbdbd8000. [2025-09-23 23:29:19.870] Read at address 0x00600018 (0xffffbdbd8018): 0x00000000 [2025-09-23 23:29:19.870] Write at address 0x00600018 (0xffffbdbd8018): 0x00400040, readback 0x00400040 [2025-09-23 23:29:19.870] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:29:19.870] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:29:19.966] Loaded PowerVR consumer services. [2025-09-23 23:29:20.141] Waiting data available... [2025-09-23 23:29:20.173] 512+0 records in [2025-09-23 23:29:20.173] 512+0 records out [2025-09-23 23:29:20.205] Starting syslogd/klogd: done [2025-09-23 23:29:20.221] DML Start [2025-09-23 23:29:20.381] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:29:20.637] DML res1: 0 [2025-09-23 23:29:21.080] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:29:21.080] Read Success [2025-09-23 23:29:21.080] Verifying certificate... [2025-09-23 23:29:21.367] Verified OK [2025-09-23 23:29:21.383] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:29:23.060] Verified OK [2025-09-23 23:29:23.060] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:29:23.610] Verified OK [2025-09-23 23:29:23.610] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:29:26.087] fs.protected_hardlinks = 1 [2025-09-23 23:29:26.087] fs.protected_symlinks = 1 [2025-09-23 23:29:26.103] kernel.modules_disabled = 1 [2025-09-23 23:29:26.279] [2025-09-23 23:29:26.279] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:29:27.661] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:29:35.573] SBL1:1210.0.1.0 [2025-09-23 23:29:35.604] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:29:37.188] SBL2:1210.0.1.0 [2025-09-23 23:29:37.236] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:29:37.332] j-A [2025-09-23 23:29:44.687] The R5 Autosar Classic is running [2025-09-23 23:29:44.709] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:29:44.709] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:29:45.317] INIT: version 2.96 booting [2025-09-23 23:29:45.429] INIT: Entering runlevel: 5 [2025-09-23 23:29:45.589] mtd28 attached [2025-09-23 23:29:45.589] mtd24 attached [2025-09-23 23:29:45.605] mtd32 attached [2025-09-23 23:29:45.653] RTNETLINK answers: File exists [2025-09-23 23:29:45.653] ubi0:animations is mounted. [2025-09-23 23:29:45.669] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:29:45.669] ubi1:textures is mounted. [2025-09-23 23:29:45.723] ubi2:dml_code is mounted. [2025-09-23 23:29:45.723] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:29:45.723] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:29:45.723] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:29:45.723] data.LB_FadeInType0=100 [2025-09-23 23:29:45.723] data.CHLH_FadeInType0=0 [2025-09-23 23:29:45.723] data.WU_FadeInDelay=0 [2025-09-23 23:29:45.723] max_time_out=0 [2025-09-23 23:29:45.723] No splash screen [2025-09-23 23:29:45.723] stop dss Done [2025-09-23 23:29:45.723] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:29:45.796] /dev/mem opened. [2025-09-23 23:29:45.796] Memory mapped at address 0xffff82600000. [2025-09-23 23:29:45.796] Read at address 0x00600018 (0xffff82600018): 0x00000000 [2025-09-23 23:29:45.796] Write at address 0x00600018 (0xffff82600018): 0x00400040, readback 0x00400040 [2025-09-23 23:29:45.796] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:29:45.812] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:29:46.019] Loaded PowerVR consumer services. [2025-09-23 23:29:46.099] Waiting data available... [2025-09-23 23:29:46.115] 512+0 records in [2025-09-23 23:29:46.131] 512+0 records out [2025-09-23 23:29:46.147] Starting syslogd/klogd: done [2025-09-23 23:29:46.163] DML Start [2025-09-23 23:29:46.371] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:29:46.579] DML res1: 0 [2025-09-23 23:29:46.929] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:29:46.929] Read Success [2025-09-23 23:29:46.929] Verifying certificate... [2025-09-23 23:29:47.169] Verified OK [2025-09-23 23:29:47.184] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:29:48.910] Verified OK [2025-09-23 23:29:48.910] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:29:49.518] Verified OK [2025-09-23 23:29:49.518] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:29:52.077] fs.protected_hardlinks = 1 [2025-09-23 23:29:52.093] fs.protected_symlinks = 1 [2025-09-23 23:29:52.093] kernel.modules_disabled = 1 [2025-09-23 23:29:52.301] [2025-09-23 23:29:52.301] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:29:53.671] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:30:01.503] SBL1:1210.0.1.0 [2025-09-23 23:30:01.535] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:30:03.117] SBL2:1210.0.1.0 [2025-09-23 23:30:03.150] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:30:03.262] j-A [2025-09-23 23:30:10.617] The R5 Autosar Classic is running [2025-09-23 23:30:10.617] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:30:10.638] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:30:11.245] INIT: version 2.96 booting [2025-09-23 23:30:11.357] INIT: Entering runlevel: 5 [2025-09-23 23:30:11.518] mtd28 attached [2025-09-23 23:30:11.518] mtd24 attached [2025-09-23 23:30:11.534] mtd32 attached [2025-09-23 23:30:11.582] ubi0:animations is mounted. [2025-09-23 23:30:11.582] RTNETLINK answers: File exists [2025-09-23 23:30:11.638] ubi2:dml_code is mounted. [2025-09-23 23:30:11.638] ubi1:textures is mounted. [2025-09-23 23:30:11.638] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:30:11.638] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:30:11.638] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:30:11.638] data.LB_FadeInType0=100 [2025-09-23 23:30:11.638] data.CHLH_FadeInType0=0 [2025-09-23 23:30:11.638] data.WU_FadeInDelay=0 [2025-09-23 23:30:11.638] max_time_out=0 [2025-09-23 23:30:11.638] No splash screen [2025-09-23 23:30:11.638] stop dss Done [2025-09-23 23:30:11.638] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:30:11.638] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:30:11.670] /dev/mem opened. [2025-09-23 23:30:11.670] Memory mapped at address 0xffffbb0ec000. [2025-09-23 23:30:11.696] Read at address 0x00600018 (0xffffbb0ec018): 0x00000000 [2025-09-23 23:30:11.696] Write at address 0x00600018 (0xffffbb0ec018): 0x00400040, readback 0x00400040 [2025-09-23 23:30:11.744] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:30:11.759] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:30:11.999] Loaded PowerVR consumer services. [2025-09-23 23:30:12.047] Waiting data available... [2025-09-23 23:30:12.063] 512+0 records in [2025-09-23 23:30:12.063] 512+0 records out [2025-09-23 23:30:12.095] Starting syslogd/klogd: done [2025-09-23 23:30:12.111] DML Start [2025-09-23 23:30:12.287] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:30:12.527] DML res1: 0 [2025-09-23 23:30:12.879] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:30:12.895] Read Success [2025-09-23 23:30:12.895] Verifying certificate... [2025-09-23 23:30:13.134] Verified OK [2025-09-23 23:30:13.150] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:30:14.749] Verified OK [2025-09-23 23:30:14.749] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:30:15.379] Verified OK [2025-09-23 23:30:15.379] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:30:17.906] fs.protected_hardlinks = 1 [2025-09-23 23:30:17.922] fs.protected_symlinks = 1 [2025-09-23 23:30:17.922] kernel.modules_disabled = 1 [2025-09-23 23:30:18.114] [2025-09-23 23:30:18.114] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:30:19.536] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:30:27.408] SBL1:1210.0.1.0 [2025-09-23 23:30:27.456] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:30:29.022] SBL2:1210.0.1.0 [2025-09-23 23:30:29.070] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:30:29.182] j-A [2025-09-23 23:30:36.521] The R5 Autosar Classic is running [2025-09-23 23:30:36.552] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:30:36.552] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:30:37.160] INIT: version 2.96 booting [2025-09-23 23:30:37.271] INIT: Entering runlevel: 5 [2025-09-23 23:30:37.431] mtd24 attached [2025-09-23 23:30:37.431] mtd28 attached [2025-09-23 23:30:37.447] mtd32 attached [2025-09-23 23:30:37.463] ubi0:textures is mounted. [2025-09-23 23:30:37.495] RTNETLINK answers: File exists [2025-09-23 23:30:37.533] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:30:37.533] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:30:37.533] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:30:37.533] ubi1:animations is mounted. [2025-09-23 23:30:37.533] ubi2:dml_code is mounted. [2025-09-23 23:30:37.533] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:30:37.533] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:30:37.558] data.LB_FadeInType0=100 [2025-09-23 23:30:37.558] data.CHLH_FadeInType0=0 [2025-09-23 23:30:37.558] data.WU_FadeInDelay=0 [2025-09-23 23:30:37.558] max_time_out=0 [2025-09-23 23:30:37.558] No splash screen [2025-09-23 23:30:37.558] stop dss Done [2025-09-23 23:30:37.606] /dev/mem opened. [2025-09-23 23:30:37.606] Memory mapped at address 0xffff87104000. [2025-09-23 23:30:37.638] Read at address 0x00600018 (0xffff87104018): 0x00000000 [2025-09-23 23:30:37.638] Write at address 0x00600018 (0xffff87104018): 0x00400040, readback 0x00400040 [2025-09-23 23:30:37.638] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:30:37.638] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:30:37.814] Loaded PowerVR consumer services. [2025-09-23 23:30:37.910] Waiting data available... [2025-09-23 23:30:37.926] 512+0 records in [2025-09-23 23:30:37.926] 512+0 records out [2025-09-23 23:30:37.974] Starting syslogd/klogd: done [2025-09-23 23:30:37.990] DML Start [2025-09-23 23:30:38.182] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:30:38.422] DML res1: 0 [2025-09-23 23:30:38.798] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:30:38.798] Read Success [2025-09-23 23:30:38.798] Verifying certificate... [2025-09-23 23:30:39.039] Verified OK [2025-09-23 23:30:39.054] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:30:40.744] Verified OK [2025-09-23 23:30:40.744] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:30:41.347] Verified OK [2025-09-23 23:30:41.347] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:30:43.857] fs.protected_hardlinks = 1 [2025-09-23 23:30:43.857] fs.protected_symlinks = 1 [2025-09-23 23:30:43.873] kernel.modules_disabled = 1 [2025-09-23 23:30:44.049] [2025-09-23 23:30:44.049] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:30:45.504] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:30:53.255] SBL1:1210.0.1.0 [2025-09-23 23:30:53.287] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:30:54.870] SBL2:1210.0.1.0 [2025-09-23 23:30:54.902] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:30:55.015] j-A [2025-09-23 23:31:02.390] The R5 Autosar Classic is running [2025-09-23 23:31:02.390] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:31:02.390] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:31:02.997] INIT: version 2.96 booting [2025-09-23 23:31:03.094] INIT: Entering runlevel: 5 [2025-09-23 23:31:03.253] mtd24 attached [2025-09-23 23:31:03.268] mtd32 attached [2025-09-23 23:31:03.268] mtd28 attached [2025-09-23 23:31:03.317] ubi0:textures is mounted. [2025-09-23 23:31:03.364] RTNETLINK answers: File exists [2025-09-23 23:31:03.364] ubi1:dml_code is mounted. [2025-09-23 23:31:03.364] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:31:03.364] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:31:03.364] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:31:03.364] ubi2:animations is mounted. [2025-09-23 23:31:03.364] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:31:03.364] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:31:03.391] data.LB_FadeInType0=100 [2025-09-23 23:31:03.391] data.CHLH_FadeInType0=0 [2025-09-23 23:31:03.391] data.WU_FadeInDelay=0 [2025-09-23 23:31:03.391] max_time_out=0 [2025-09-23 23:31:03.391] No splash screen [2025-09-23 23:31:03.391] stop dss Done [2025-09-23 23:31:03.423] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:31:03.439] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:31:03.473] /dev/mem opened. [2025-09-23 23:31:03.473] Memory mapped at address 0xffffb81b8000. [2025-09-23 23:31:03.473] Read at address 0x00600018 (0xffffb81b8018): 0x00000000 [2025-09-23 23:31:03.473] Write at address 0x00600018 (0xffffb81b8018): 0x00400040, readback 0x00400040 [2025-09-23 23:31:03.712] Loaded PowerVR consumer services. [2025-09-23 23:31:03.777] Waiting data available... [2025-09-23 23:31:03.793] 512+0 records in [2025-09-23 23:31:03.793] 512+0 records out [2025-09-23 23:31:03.809] Starting syslogd/klogd: done [2025-09-23 23:31:03.825] DML Start [2025-09-23 23:31:03.984] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:31:04.224] DML res1: 0 [2025-09-23 23:31:04.621] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:31:04.621] Read Success [2025-09-23 23:31:04.621] Verifying certificate... [2025-09-23 23:31:04.877] Verified OK [2025-09-23 23:31:04.893] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:31:06.551] Verified OK [2025-09-23 23:31:06.551] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:31:07.196] Verified OK [2025-09-23 23:31:07.196] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:31:09.866] fs.protected_hardlinks = 1 [2025-09-23 23:31:09.866] fs.protected_symlinks = 1 [2025-09-23 23:31:09.882] kernel.modules_disabled = 1 [2025-09-23 23:31:10.074] [2025-09-23 23:31:10.074] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:31:11.282] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:31:19.089] SBL1:1210.0.1.0 [2025-09-23 23:31:19.137] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:31:20.703] SBL2:1210.0.1.0 [2025-09-23 23:31:20.751] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:31:20.847] j-A [2025-09-23 23:31:28.202] The R5 Autosar Classic is running [2025-09-23 23:31:28.225] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:31:28.225] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:31:28.832] INIT: version 2.96 booting [2025-09-23 23:31:28.944] INIT: Entering runlevel: 5 [2025-09-23 23:31:29.104] mtd24 attached [2025-09-23 23:31:29.104] mtd28 attached [2025-09-23 23:31:29.120] mtd32 attached [2025-09-23 23:31:29.168] RTNETLINK answers: File exists [2025-09-23 23:31:29.232] ubi0:textures is mounted. [2025-09-23 23:31:29.232] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:31:29.232] ubi1:animations is mounted. [2025-09-23 23:31:29.232] ubi2:dml_code is mounted. [2025-09-23 23:31:29.232] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:31:29.232] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:31:29.232] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:31:29.232] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:31:29.232] data.LB_FadeInType0=100 [2025-09-23 23:31:29.232] data.CHLH_FadeInType0=0 [2025-09-23 23:31:29.232] data.WU_FadeInDelay=0 [2025-09-23 23:31:29.232] max_time_out=0 [2025-09-23 23:31:29.232] No splash screen [2025-09-23 23:31:29.232] stop dss Done [2025-09-23 23:31:29.264] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:31:29.306] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:31:29.306] /dev/mem opened. [2025-09-23 23:31:29.306] Memory mapped at address 0xffffb8535000. [2025-09-23 23:31:29.306] Read at address 0x00600018 (0xffffb8535018): 0x00000000 [2025-09-23 23:31:29.306] Write at address 0x00600018 (0xffffb8535018): 0x00400040, readback 0x00400040 [2025-09-23 23:31:29.434] Loaded PowerVR consumer services. [2025-09-23 23:31:29.594] Waiting data available... [2025-09-23 23:31:29.610] 512+0 records in [2025-09-23 23:31:29.610] 512+0 records out [2025-09-23 23:31:29.642] Starting syslogd/klogd: done [2025-09-23 23:31:29.674] DML Start [2025-09-23 23:31:29.834] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:31:30.073] DML res1: 0 [2025-09-23 23:31:30.521] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:31:30.521] Read Success [2025-09-23 23:31:30.537] Verifying certificate... [2025-09-23 23:31:30.745] Verified OK [2025-09-23 23:31:30.761] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:31:32.485] Verified OK [2025-09-23 23:31:32.485] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:31:33.027] Verified OK [2025-09-23 23:31:33.027] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:31:35.507] fs.protected_hardlinks = 1 [2025-09-23 23:31:35.507] fs.protected_symlinks = 1 [2025-09-23 23:31:35.523] kernel.modules_disabled = 1 [2025-09-23 23:31:35.714] [2025-09-23 23:31:35.714] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:31:37.103] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:31:44.925] SBL1:1210.0.1.0 [2025-09-23 23:31:44.973] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:31:46.540] SBL2:1210.0.1.0 [2025-09-23 23:31:46.588] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:31:46.684] j-A [2025-09-23 23:31:54.039] The R5 Autosar Classic is running [2025-09-23 23:31:54.064] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:31:54.064] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:31:54.671] INIT: version 2.96 booting [2025-09-23 23:31:54.783] INIT: Entering runlevel: 5 [2025-09-23 23:31:54.927] mtd24 attached [2025-09-23 23:31:54.943] mtd32 attached [2025-09-23 23:31:54.975] mtd28 attached [2025-09-23 23:31:54.975] ubi0:textures is mounted. [2025-09-23 23:31:54.991] ubi1:dml_code is mounted. [2025-09-23 23:31:55.007] RTNETLINK answers: File exists [2025-09-23 23:31:55.031] ubi2:animations is mounted. [2025-09-23 23:31:55.031] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:31:55.031] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:31:55.031] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:31:55.063] data.LB_FadeInType0=100 [2025-09-23 23:31:55.063] data.CHLH_FadeInType0=0 [2025-09-23 23:31:55.063] data.WU_FadeInDelay=0 [2025-09-23 23:31:55.063] max_time_out=0 [2025-09-23 23:31:55.063] No splash screen [2025-09-23 23:31:55.063] stop dss Done [2025-09-23 23:31:55.063] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:31:55.063] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:31:55.113] /dev/mem opened. [2025-09-23 23:31:55.113] Memory mapped at address 0xffff8764d000. [2025-09-23 23:31:55.113] Read at address 0x00600018 (0xffff8764d018): 0x00000000 [2025-09-23 23:31:55.113] Write at address 0x00600018 (0xffff8764d018): 0x00400040, readback 0x00400040 [2025-09-23 23:31:55.175] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:31:55.175] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:31:55.238] Loaded PowerVR consumer services. [2025-09-23 23:31:55.415] Waiting data available... [2025-09-23 23:31:55.431] 512+0 records in [2025-09-23 23:31:55.431] 512+0 records out [2025-09-23 23:31:55.478] Starting syslogd/klogd: done [2025-09-23 23:31:55.494] DML Start [2025-09-23 23:31:55.687] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:31:55.895] DML res1: 0 [2025-09-23 23:31:56.310] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:31:56.326] Read Success [2025-09-23 23:31:56.326] Verifying certificate... [2025-09-23 23:31:56.550] Verified OK [2025-09-23 23:31:56.566] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:31:58.196] Verified OK [2025-09-23 23:31:58.196] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:31:58.804] Verified OK [2025-09-23 23:31:58.824] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:32:01.383] fs.protected_hardlinks = 1 [2025-09-23 23:32:01.411] fs.protected_symlinks = 1 [2025-09-23 23:32:01.411] kernel.modules_disabled = 1 [2025-09-23 23:32:01.587] [2025-09-23 23:32:01.587] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:32:02.910] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:32:10.737] SBL1:1210.0.1.0 [2025-09-23 23:32:10.785] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:32:12.352] SBL2:1210.0.1.0 [2025-09-23 23:32:12.399] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:32:12.495] j-A [2025-09-23 23:32:19.850] The R5 Autosar Classic is running [2025-09-23 23:32:19.875] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:32:19.876] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:32:20.482] INIT: version 2.96 booting [2025-09-23 23:32:20.594] INIT: Entering runlevel: 5 [2025-09-23 23:32:20.754] mtd28 attached [2025-09-23 23:32:20.754] mtd32 attached [2025-09-23 23:32:20.770] mtd24 attached [2025-09-23 23:32:20.818] RTNETLINK answers: File exists [2025-09-23 23:32:20.818] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:32:20.883] ubi0:animations is mounted. [2025-09-23 23:32:20.883] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:32:20.883] ubi2:textures is mounted. [2025-09-23 23:32:20.883] ubi1:dml_code is mounted. [2025-09-23 23:32:20.883] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:32:20.883] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:32:20.883] data.LB_FadeInType0=100 [2025-09-23 23:32:20.883] data.CHLH_FadeInType0=0 [2025-09-23 23:32:20.883] data.WU_FadeInDelay=0 [2025-09-23 23:32:20.883] max_time_out=0 [2025-09-23 23:32:20.883] No splash screen [2025-09-23 23:32:20.883] stop dss Done [2025-09-23 23:32:20.883] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:32:20.915] /dev/mem opened. [2025-09-23 23:32:20.915] Memory mapped at address 0xffff8d5a5000. [2025-09-23 23:32:20.947] Read at address 0x00600018 (0xffff8d5a5018): 0x00000000 [2025-09-23 23:32:20.947] Write at address 0x00600018 (0xffff8d5a5018): 0x00400040, readback 0x00400040 [2025-09-23 23:32:20.947] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:32:20.947] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:32:21.043] Loaded PowerVR consumer services. [2025-09-23 23:32:21.218] Waiting data available... [2025-09-23 23:32:21.250] 512+0 records in [2025-09-23 23:32:21.250] 512+0 records out [2025-09-23 23:32:21.298] Starting syslogd/klogd: done [2025-09-23 23:32:21.315] DML Start [2025-09-23 23:32:21.475] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:32:21.666] DML res1: 0 [2025-09-23 23:32:22.137] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:32:22.137] Read Success [2025-09-23 23:32:22.137] Verifying certificate... [2025-09-23 23:32:22.362] Verified OK [2025-09-23 23:32:22.377] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:32:24.128] Verified OK [2025-09-23 23:32:24.128] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:32:24.725] Verified OK [2025-09-23 23:32:24.725] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:32:27.251] fs.protected_hardlinks = 1 [2025-09-23 23:32:27.251] fs.protected_symlinks = 1 [2025-09-23 23:32:27.267] kernel.modules_disabled = 1 [2025-09-23 23:32:27.476] [2025-09-23 23:32:27.476] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:32:28.750] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:32:36.566] SBL1:1210.0.1.0 [2025-09-23 23:32:36.614] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:32:38.182] SBL2:1210.0.1.0 [2025-09-23 23:32:38.230] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:32:38.342] j-A [2025-09-23 23:32:45.715] The R5 Autosar Classic is running [2025-09-23 23:32:45.715] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:32:45.715] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:32:46.323] INIT: version 2.96 booting [2025-09-23 23:32:46.434] INIT: Entering runlevel: 5 [2025-09-23 23:32:46.595] mtd24 attached [2025-09-23 23:32:46.595] mtd32 attached [2025-09-23 23:32:46.611] mtd28 attached [2025-09-23 23:32:46.659] RTNETLINK answers: File exists [2025-09-23 23:32:46.709] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:32:46.709] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:32:46.709] ubi0:textures is mounted. [2025-09-23 23:32:46.709] ubi2:animations is mounted. [2025-09-23 23:32:46.709] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:32:46.709] ubi1:dml_code is mounted. [2025-09-23 23:32:46.709] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:32:46.709] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:32:46.709] data.LB_FadeInType0=100 [2025-09-23 23:32:46.709] data.CHLH_FadeInType0=0 [2025-09-23 23:32:46.730] data.WU_FadeInDelay=0 [2025-09-23 23:32:46.730] max_time_out=0 [2025-09-23 23:32:46.730] No splash screen [2025-09-23 23:32:46.730] stop dss Done [2025-09-23 23:32:46.746] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:32:46.762] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:32:46.779] /dev/mem opened. [2025-09-23 23:32:46.779] Memory mapped at address 0xffffb3e3b000. [2025-09-23 23:32:46.805] Read at address 0x00600018 (0xffffb3e3b018): 0x00000000 [2025-09-23 23:32:46.805] Write at address 0x00600018 (0xffffb3e3b018): 0x00400040, readback 0x00400040 [2025-09-23 23:32:47.012] Loaded PowerVR consumer services. [2025-09-23 23:32:47.108] Waiting data available... [2025-09-23 23:32:47.124] 512+0 records in [2025-09-23 23:32:47.140] 512+0 records out [2025-09-23 23:32:47.156] Starting syslogd/klogd: done [2025-09-23 23:32:47.172] DML Start [2025-09-23 23:32:47.332] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:32:47.572] DML res1: 0 [2025-09-23 23:32:48.046] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:32:48.046] Read Success [2025-09-23 23:32:48.046] Verifying certificate... [2025-09-23 23:32:48.317] Verified OK [2025-09-23 23:32:48.349] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:32:49.970] Verified OK [2025-09-23 23:32:49.970] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:32:50.561] Verified OK [2025-09-23 23:32:50.561] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:32:53.166] fs.protected_hardlinks = 1 [2025-09-23 23:32:53.166] fs.protected_symlinks = 1 [2025-09-23 23:32:53.166] kernel.modules_disabled = 1 [2025-09-23 23:32:53.357] [2025-09-23 23:32:53.357] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:32:54.600] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:33:02.394] SBL1:1210.0.1.0 [2025-09-23 23:33:02.442] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:33:04.009] SBL2:1210.0.1.0 [2025-09-23 23:33:04.057] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:33:04.152] j-A [2025-09-23 23:33:11.508] The R5 Autosar Classic is running [2025-09-23 23:33:11.533] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:33:11.533] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:33:12.140] INIT: version 2.96 booting [2025-09-23 23:33:12.253] INIT: Entering runlevel: 5 [2025-09-23 23:33:12.396] mtd24 attached [2025-09-23 23:33:12.412] mtd32 attached [2025-09-23 23:33:12.428] mtd28 attached [2025-09-23 23:33:12.510] RTNETLINK answers: File exists [2025-09-23 23:33:12.510] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:33:12.510] ubi2:animations is mounted. [2025-09-23 23:33:12.510] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:33:12.510] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:33:12.510] ubi0:textures is mounted. [2025-09-23 23:33:12.510] ubi1:dml_code is mounted. [2025-09-23 23:33:12.510] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:33:12.510] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:33:12.541] data.LB_FadeInType0=100 [2025-09-23 23:33:12.541] data.CHLH_FadeInType0=0 [2025-09-23 23:33:12.541] data.WU_FadeInDelay=0 [2025-09-23 23:33:12.541] max_time_out=0 [2025-09-23 23:33:12.541] No splash screen [2025-09-23 23:33:12.541] stop dss Done [2025-09-23 23:33:12.557] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:33:12.583] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:33:12.583] /dev/mem opened. [2025-09-23 23:33:12.583] Memory mapped at address 0xffff93f45000. [2025-09-23 23:33:12.609] Read at address 0x00600018 (0xffff93f45018): 0x00000000 [2025-09-23 23:33:12.609] Write at address 0x00600018 (0xffff93f45018): 0x00400040, readback 0x00400040 [2025-09-23 23:33:12.752] Loaded PowerVR consumer services. [2025-09-23 23:33:12.880] Waiting data available... [2025-09-23 23:33:12.896] 512+0 records in [2025-09-23 23:33:12.896] 512+0 records out [2025-09-23 23:33:12.928] Starting syslogd/klogd: done [2025-09-23 23:33:12.944] DML Start [2025-09-23 23:33:13.136] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:33:13.360] DML res1: 0 [2025-09-23 23:33:13.787] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:33:13.787] Read Success [2025-09-23 23:33:13.787] Verifying certificate... [2025-09-23 23:33:14.027] Verified OK [2025-09-23 23:33:14.043] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:33:15.786] Verified OK [2025-09-23 23:33:15.786] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:33:16.354] Verified OK [2025-09-23 23:33:16.354] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:33:18.881] fs.protected_hardlinks = 1 [2025-09-23 23:33:18.897] fs.protected_symlinks = 1 [2025-09-23 23:33:18.897] kernel.modules_disabled = 1 [2025-09-23 23:33:19.104] [2025-09-23 23:33:19.104] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:33:20.359] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:33:28.202] SBL1:1210.0.1.0 [2025-09-23 23:33:28.233] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:33:29.816] SBL2:1210.0.1.0 [2025-09-23 23:33:29.864] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:33:29.961] j-A [2025-09-23 23:33:37.316] The R5 Autosar Classic is running [2025-09-23 23:33:37.337] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:33:37.337] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:33:37.945] INIT: version 2.96 booting [2025-09-23 23:33:38.057] INIT: Entering runlevel: 5 [2025-09-23 23:33:38.217] mtd24 attached [2025-09-23 23:33:38.217] mtd28 attached [2025-09-23 23:33:38.233] mtd32 attached [2025-09-23 23:33:38.281] ubi0:textures is mounted. [2025-09-23 23:33:38.281] RTNETLINK answers: File exists [2025-09-23 23:33:38.297] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:33:38.297] ubi2:dml_code is mounted. [2025-09-23 23:33:38.352] ubi1:animations is mounted. [2025-09-23 23:33:38.352] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:33:38.352] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:33:38.352] data.LB_FadeInType0=100 [2025-09-23 23:33:38.352] data.CHLH_FadeInType0=0 [2025-09-23 23:33:38.352] data.WU_FadeInDelay=0 [2025-09-23 23:33:38.352] max_time_out=0 [2025-09-23 23:33:38.352] No splash screen [2025-09-23 23:33:38.352] stop dss Done [2025-09-23 23:33:38.352] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:33:38.352] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:33:38.383] /dev/mem opened. [2025-09-23 23:33:38.383] Memory mapped at address 0xffffbc64c000. [2025-09-23 23:33:38.409] Read at address 0x00600018 (0xffffbc64c018): 0x00000000 [2025-09-23 23:33:38.409] Write at address 0x00600018 (0xffffbc64c018): 0x00400040, readback 0x00400040 [2025-09-23 23:33:38.425] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:33:38.457] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:33:38.714] Loaded PowerVR consumer services. [2025-09-23 23:33:38.745] Waiting data available... [2025-09-23 23:33:38.761] 512+0 records in [2025-09-23 23:33:38.761] 512+0 records out [2025-09-23 23:33:38.777] Starting syslogd/klogd: done [2025-09-23 23:33:38.809] DML Start [2025-09-23 23:33:38.986] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:33:39.194] DML res1: 0 [2025-09-23 23:33:39.657] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:33:39.678] Read Success [2025-09-23 23:33:39.678] Verifying certificate... [2025-09-23 23:33:39.902] Verified OK [2025-09-23 23:33:39.902] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:33:41.523] Verified OK [2025-09-23 23:33:41.523] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:33:42.059] Verified OK [2025-09-23 23:33:42.059] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:33:44.680] fs.protected_hardlinks = 1 [2025-09-23 23:33:44.696] fs.protected_symlinks = 1 [2025-09-23 23:33:44.712] kernel.modules_disabled = 1 [2025-09-23 23:33:44.920] [2025-09-23 23:33:44.920] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:33:46.228] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:33:54.000] SBL1:1210.0.1.0 [2025-09-23 23:33:54.048] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:33:55.614] SBL2:1210.0.1.0 [2025-09-23 23:33:55.662] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:33:55.774] j-A [2025-09-23 23:34:03.146] The R5 Autosar Classic is running [2025-09-23 23:34:03.146] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:34:03.146] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:34:03.754] INIT: version 2.96 booting [2025-09-23 23:34:03.866] INIT: Entering runlevel: 5 [2025-09-23 23:34:04.026] mtd28 attached [2025-09-23 23:34:04.026] mtd24 attached [2025-09-23 23:34:04.042] mtd32 attached [2025-09-23 23:34:04.058] ubi0:animations is mounted. [2025-09-23 23:34:04.090] RTNETLINK answers: File exists [2025-09-23 23:34:04.158] ubi2:dml_code is mounted. [2025-09-23 23:34:04.158] ubi1:textures is mounted. [2025-09-23 23:34:04.158] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:34:04.158] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:34:04.158] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:34:04.158] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:34:04.158] data.LB_FadeInType0=100 [2025-09-23 23:34:04.158] data.CHLH_FadeInType0=0 [2025-09-23 23:34:04.158] data.WU_FadeInDelay=0 [2025-09-23 23:34:04.158] max_time_out=0 [2025-09-23 23:34:04.158] No splash screen [2025-09-23 23:34:04.158] stop dss Done [2025-09-23 23:34:04.158] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:34:04.200] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:34:04.200] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:34:04.200] /dev/mem opened. [2025-09-23 23:34:04.200] Memory mapped at address 0xffffa2f80000. [2025-09-23 23:34:04.226] Read at address 0x00600018 (0xffffa2f80018): 0x00000000 [2025-09-23 23:34:04.226] Write at address 0x00600018 (0xffffa2f80018): 0x00400040, readback 0x00400040 [2025-09-23 23:34:04.322] Loaded PowerVR consumer services. [2025-09-23 23:34:04.497] Waiting data available... [2025-09-23 23:34:04.513] 512+0 records in [2025-09-23 23:34:04.513] 512+0 records out [2025-09-23 23:34:04.562] Starting syslogd/klogd: done [2025-09-23 23:34:04.578] DML Start [2025-09-23 23:34:04.786] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:34:05.025] DML res1: 0 [2025-09-23 23:34:05.389] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:34:05.389] Read Success [2025-09-23 23:34:05.389] Verifying certificate... [2025-09-23 23:34:05.629] Verified OK [2025-09-23 23:34:05.645] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:34:07.372] Verified OK [2025-09-23 23:34:07.372] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:34:08.025] Verified OK [2025-09-23 23:34:08.025] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:34:10.711] fs.protected_hardlinks = 1 [2025-09-23 23:34:10.711] fs.protected_symlinks = 1 [2025-09-23 23:34:10.727] kernel.modules_disabled = 1 [2025-09-23 23:34:10.919] [2025-09-23 23:34:10.919] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:34:12.081] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:34:19.818] SBL1:1210.0.1.0 [2025-09-23 23:34:19.866] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:34:21.433] SBL2:1210.0.1.0 [2025-09-23 23:34:21.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:34:21.592] j-A [2025-09-23 23:34:28.933] The R5 Autosar Classic is running [2025-09-23 23:34:28.957] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:34:28.957] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:34:29.565] INIT: version 2.96 booting [2025-09-23 23:34:29.678] INIT: Entering runlevel: 5 [2025-09-23 23:34:29.837] mtd28 attached [2025-09-23 23:34:29.837] mtd24 attached [2025-09-23 23:34:29.854] mtd32 attached [2025-09-23 23:34:29.902] RTNETLINK answers: File exists [2025-09-23 23:34:29.902] ubi0:animations is mounted. [2025-09-23 23:34:29.963] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:34:29.964] ubi2:dml_code is mounted. [2025-09-23 23:34:29.964] ubi1:textures is mounted. [2025-09-23 23:34:29.964] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:34:29.964] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:34:29.964] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:34:29.964] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:34:29.964] data.LB_FadeInType0=100 [2025-09-23 23:34:29.964] data.CHLH_FadeInType0=0 [2025-09-23 23:34:29.964] data.WU_FadeInDelay=0 [2025-09-23 23:34:29.964] max_time_out=0 [2025-09-23 23:34:29.964] No splash screen [2025-09-23 23:34:29.964] stop dss Done [2025-09-23 23:34:30.026] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:34:30.026] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:34:30.026] /dev/mem opened. [2025-09-23 23:34:30.026] Memory mapped at address 0xffff80a2b000. [2025-09-23 23:34:30.026] Read at address 0x00600018 (0xffff80a2b018): 0x00000000 [2025-09-23 23:34:30.026] Write at address 0x00600018 (0xffff80a2b018): 0x00400040, readback 0x00400040 [2025-09-23 23:34:30.250] Loaded PowerVR consumer services. [2025-09-23 23:34:30.314] Waiting data available... [2025-09-23 23:34:30.346] 512+0 records in [2025-09-23 23:34:30.346] 512+0 records out [2025-09-23 23:34:30.394] Starting syslogd/klogd: done [2025-09-23 23:34:30.410] DML Start [2025-09-23 23:34:30.554] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:34:30.777] DML res1: 0 [2025-09-23 23:34:31.241] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:34:31.268] Read Success [2025-09-23 23:34:31.268] Verifying certificate... [2025-09-23 23:34:31.476] Verified OK [2025-09-23 23:34:31.492] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:34:33.181] Verified OK [2025-09-23 23:34:33.181] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:34:33.751] Verified OK [2025-09-23 23:34:33.751] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:34:36.358] fs.protected_hardlinks = 1 [2025-09-23 23:34:36.358] fs.protected_symlinks = 1 [2025-09-23 23:34:36.374] kernel.modules_disabled = 1 [2025-09-23 23:34:36.566] [2025-09-23 23:34:36.566] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:34:37.826] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:34:45.626] SBL1:1210.0.1.0 [2025-09-23 23:34:45.673] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:34:47.240] SBL2:1210.0.1.0 [2025-09-23 23:34:47.288] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:34:47.400] j-A [2025-09-23 23:34:54.740] The R5 Autosar Classic is running [2025-09-23 23:34:54.771] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:34:54.771] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:34:55.379] INIT: version 2.96 booting [2025-09-23 23:34:55.490] INIT: Entering runlevel: 5 [2025-09-23 23:34:55.651] mtd24 attached [2025-09-23 23:34:55.651] mtd28 attached [2025-09-23 23:34:55.667] mtd32 attached [2025-09-23 23:34:55.699] ubi0:textures is mounted. [2025-09-23 23:34:55.715] ubi1:animations is mounted. [2025-09-23 23:34:55.730] ubi2:dml_code is mounted. [2025-09-23 23:34:55.730] RTNETLINK answers: File exists [2025-09-23 23:34:55.777] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:34:55.777] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:34:55.777] data.LB_FadeInType0=100 [2025-09-23 23:34:55.777] data.CHLH_FadeInType0=0 [2025-09-23 23:34:55.777] data.WU_FadeInDelay=0 [2025-09-23 23:34:55.777] max_time_out=0 [2025-09-23 23:34:55.777] No splash screen [2025-09-23 23:34:55.777] stop dss Done [2025-09-23 23:34:55.777] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:34:55.777] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:34:55.793] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:34:55.834] /dev/mem opened. [2025-09-23 23:34:55.834] Memory mapped at address 0xffffa4006000. [2025-09-23 23:34:55.834] Read at address 0x00600018 (0xffffa4006018): 0x00000000 [2025-09-23 23:34:55.834] Write at address 0x00600018 (0xffffa4006018): 0x00400040, readback 0x00400040 [2025-09-23 23:34:55.875] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:34:55.875] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:34:56.141] Loaded PowerVR consumer services. [2025-09-23 23:34:56.141] Waiting data available... [2025-09-23 23:34:56.173] 512+0 records in [2025-09-23 23:34:56.173] 512+0 records out [2025-09-23 23:34:56.220] Starting syslogd/klogd: done [2025-09-23 23:34:56.237] DML Start [2025-09-23 23:34:56.413] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:34:56.669] DML res1: 0 [2025-09-23 23:34:57.020] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:34:57.042] Read Success [2025-09-23 23:34:57.042] Verifying certificate... [2025-09-23 23:34:57.313] Verified OK [2025-09-23 23:34:57.345] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:34:59.119] Verified OK [2025-09-23 23:34:59.119] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:34:59.613] Verified OK [2025-09-23 23:34:59.613] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:35:02.028] fs.protected_hardlinks = 1 [2025-09-23 23:35:02.028] fs.protected_symlinks = 1 [2025-09-23 23:35:02.044] kernel.modules_disabled = 1 [2025-09-23 23:35:02.236] [2025-09-23 23:35:02.236] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:35:03.729] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:35:11.428] SBL1:1210.0.1.0 [2025-09-23 23:35:11.459] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:35:13.042] SBL2:1210.0.1.0 [2025-09-23 23:35:13.091] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:35:13.187] j-A [2025-09-23 23:35:20.541] The R5 Autosar Classic is running [2025-09-23 23:35:20.563] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:35:20.563] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:35:21.171] INIT: version 2.96 booting [2025-09-23 23:35:21.283] INIT: Entering runlevel: 5 [2025-09-23 23:35:21.426] mtd28 attached [2025-09-23 23:35:21.443] mtd24 attached [2025-09-23 23:35:21.459] mtd32 attached [2025-09-23 23:35:21.491] ubi0:animations is mounted. [2025-09-23 23:35:21.507] ubi1:textures is mounted. [2025-09-23 23:35:21.507] RTNETLINK answers: File exists [2025-09-23 23:35:21.564] ubi2:dml_code is mounted. [2025-09-23 23:35:21.564] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:35:21.564] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:35:21.564] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:35:21.564] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:35:21.564] data.LB_FadeInType0=100 [2025-09-23 23:35:21.564] data.CHLH_FadeInType0=0 [2025-09-23 23:35:21.564] data.WU_FadeInDelay=0 [2025-09-23 23:35:21.564] max_time_out=0 [2025-09-23 23:35:21.564] No splash screen [2025-09-23 23:35:21.564] stop dss Done [2025-09-23 23:35:21.564] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:35:21.632] /dev/mem opened. [2025-09-23 23:35:21.632] Memory mapped at address 0xffff931bb000. [2025-09-23 23:35:21.632] Read at address 0x00600018 (0xffff931bb018): 0x00000000 [2025-09-23 23:35:21.632] Write at address 0x00600018 (0xffff931bb018): 0x00400040, readback 0x00400040 [2025-09-23 23:35:21.632] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:35:21.648] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:35:21.840] Loaded PowerVR consumer services. [2025-09-23 23:35:21.920] Waiting data available... [2025-09-23 23:35:21.952] 512+0 records in [2025-09-23 23:35:21.952] 512+0 records out [2025-09-23 23:35:21.984] Starting syslogd/klogd: done [2025-09-23 23:35:22.000] DML Start [2025-09-23 23:35:22.256] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:35:22.448] DML res1: 0 [2025-09-23 23:35:22.812] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:35:22.812] Read Success [2025-09-23 23:35:22.812] Verifying certificate... [2025-09-23 23:35:23.052] Verified OK [2025-09-23 23:35:23.068] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:35:24.709] Verified OK [2025-09-23 23:35:24.709] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:35:25.356] Verified OK [2025-09-23 23:35:25.356] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:35:28.027] fs.protected_hardlinks = 1 [2025-09-23 23:35:28.027] fs.protected_symlinks = 1 [2025-09-23 23:35:28.043] kernel.modules_disabled = 1 [2025-09-23 23:35:28.251] [2025-09-23 23:35:28.251] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:35:29.473] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:35:37.244] SBL1:1210.0.1.0 [2025-09-23 23:35:37.276] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 23:35:38.858] SBL2:1210.0.1.0 [2025-09-23 23:35:38.906] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:35:39.003] j-A [2025-09-23 23:35:46.357] The R5 Autosar Classic is running [2025-09-23 23:35:46.380] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:35:46.380] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:35:46.988] INIT: version 2.96 booting [2025-09-23 23:35:47.100] INIT: Entering runlevel: 5 [2025-09-23 23:35:47.261] mtd24 attached [2025-09-23 23:35:47.261] mtd28 attached [2025-09-23 23:35:47.292] mtd32 attached [2025-09-23 23:35:47.308] ubi0:textures is mounted. [2025-09-23 23:35:47.308] ubi1:animations is mounted. [2025-09-23 23:35:47.384] RTNETLINK answers: File exists [2025-09-23 23:35:47.384] ubi2:dml_code is mounted. [2025-09-23 23:35:47.384] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:35:47.384] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:35:47.384] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:35:47.384] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:35:47.384] data.LB_FadeInType0=100 [2025-09-23 23:35:47.384] data.CHLH_FadeInType0=0 [2025-09-23 23:35:47.384] data.WU_FadeInDelay=0 [2025-09-23 23:35:47.384] max_time_out=0 [2025-09-23 23:35:47.384] No splash screen [2025-09-23 23:35:47.384] stop dss Done [2025-09-23 23:35:47.384] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:35:47.454] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:35:47.454] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:35:47.454] /dev/mem opened. [2025-09-23 23:35:47.454] Memory mapped at address 0xffff9926b000. [2025-09-23 23:35:47.454] Read at address 0x00600018 (0xffff9926b018): 0x00000000 [2025-09-23 23:35:47.454] Write at address 0x00600018 (0xffff9926b018): 0x00400040, readback 0x00400040 [2025-09-23 23:35:47.726] Loaded PowerVR consumer services. [2025-09-23 23:35:47.774] Waiting data available... [2025-09-23 23:35:47.805] 512+0 records in [2025-09-23 23:35:47.805] 512+0 records out [2025-09-23 23:35:47.837] Starting syslogd/klogd: done [2025-09-23 23:35:47.853] DML Start [2025-09-23 23:35:48.046] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:35:48.270] DML res1: 0 [2025-09-23 23:35:48.650] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:35:48.650] Read Success [2025-09-23 23:35:48.650] Verifying certificate... [2025-09-23 23:35:48.937] Verified OK [2025-09-23 23:35:48.969] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:35:50.593] Verified OK [2025-09-23 23:35:50.593] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:35:51.104] Verified OK [2025-09-23 23:35:51.126] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:35:53.861] fs.protected_hardlinks = 1 [2025-09-23 23:35:53.861] fs.protected_symlinks = 1 [2025-09-23 23:35:53.877] kernel.modules_disabled = 1 [2025-09-23 23:35:54.068] [2025-09-23 23:35:54.068] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:35:55.266] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:36:03.027] SBL1:1210.0.1.0 [2025-09-23 23:36:03.075] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:36:04.642] SBL2:1210.0.1.0 [2025-09-23 23:36:04.690] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:36:04.802] j-A [2025-09-23 23:36:12.172] The R5 Autosar Classic is running [2025-09-23 23:36:12.172] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:36:12.172] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:36:12.780] INIT: version 2.96 booting [2025-09-23 23:36:12.891] INIT: Entering runlevel: 5 [2025-09-23 23:36:13.035] mtd24 attached [2025-09-23 23:36:13.051] mtd28 attached [2025-09-23 23:36:13.067] mtd32 attached [2025-09-23 23:36:13.099] ubi0:textures is mounted. [2025-09-23 23:36:13.115] RTNETLINK answers: File exists [2025-09-23 23:36:13.115] ubi2:dml_code is mounted. [2025-09-23 23:36:13.142] ubi1:animations is mounted. [2025-09-23 23:36:13.142] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:36:13.142] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:36:13.142] data.LB_FadeInType0=100 [2025-09-23 23:36:13.168] data.CHLH_FadeInType0=0 [2025-09-23 23:36:13.168] data.WU_FadeInDelay=0 [2025-09-23 23:36:13.168] max_time_out=0 [2025-09-23 23:36:13.168] No splash screen [2025-09-23 23:36:13.168] stop dss Done [2025-09-23 23:36:13.168] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:36:13.168] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:36:13.184] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:36:13.235] /dev/mem opened. [2025-09-23 23:36:13.235] Memory mapped at address 0xffffa96d4000. [2025-09-23 23:36:13.235] Read at address 0x00600018 (0xffffa96d4018): 0x00000000 [2025-09-23 23:36:13.235] Write at address 0x00600018 (0xffffa96d4018): 0x00400040, readback 0x00400040 [2025-09-23 23:36:13.295] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:36:13.295] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:36:13.407] Loaded PowerVR consumer services. [2025-09-23 23:36:13.535] Waiting data available... [2025-09-23 23:36:13.567] 512+0 records in [2025-09-23 23:36:13.567] 512+0 records out [2025-09-23 23:36:13.599] Starting syslogd/klogd: done [2025-09-23 23:36:13.615] DML Start [2025-09-23 23:36:13.807] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:36:14.031] DML res1: 0 [2025-09-23 23:36:14.419] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:36:14.419] Read Success [2025-09-23 23:36:14.419] Verifying certificate... [2025-09-23 23:36:14.643] Verified OK [2025-09-23 23:36:14.659] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:36:16.303] Verified OK [2025-09-23 23:36:16.303] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:36:16.938] Verified OK [2025-09-23 23:36:16.938] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:36:19.704] fs.protected_hardlinks = 1 [2025-09-23 23:36:19.720] fs.protected_symlinks = 1 [2025-09-23 23:36:19.720] kernel.modules_disabled = 1 [2025-09-23 23:36:19.928] [2025-09-23 23:36:19.928] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:36:21.038] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:36:28.845] SBL1:1210.0.1.0 [2025-09-23 23:36:28.877] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:36:30.460] SBL2:1210.0.1.0 [2025-09-23 23:36:30.508] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:36:30.604] j-A [2025-09-23 23:36:37.959] The R5 Autosar Classic is running [2025-09-23 23:36:37.959] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:36:37.980] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:36:38.587] INIT: version 2.96 booting [2025-09-23 23:36:38.699] INIT: Entering runlevel: 5 [2025-09-23 23:36:38.859] mtd24 attached [2025-09-23 23:36:38.875] mtd28 attached [2025-09-23 23:36:38.891] mtd32 attached [2025-09-23 23:36:38.907] ubi0:textures is mounted. [2025-09-23 23:36:38.923] ubi1:animations is mounted. [2025-09-23 23:36:38.939] RTNETLINK answers: File exists [2025-09-23 23:36:38.939] ubi2:dml_code is mounted. [2025-09-23 23:36:38.999] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:36:38.999] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:36:38.999] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:36:38.999] data.LB_FadeInType0=100 [2025-09-23 23:36:38.999] data.CHLH_FadeInType0=0 [2025-09-23 23:36:38.999] data.WU_FadeInDelay=0 [2025-09-23 23:36:38.999] max_time_out=0 [2025-09-23 23:36:38.999] No splash screen [2025-09-23 23:36:38.999] stop dss Done [2025-09-23 23:36:38.999] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:36:38.999] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:36:39.031] /dev/mem opened. [2025-09-23 23:36:39.063] Memory mapped at address 0xffffab590000. [2025-09-23 23:36:39.063] Read at address 0x00600018 (0xffffab590018): 0x00000000 [2025-09-23 23:36:39.063] Write at address 0x00600018 (0xffffab590018): 0x00400040, readback 0x00400040 [2025-09-23 23:36:39.078] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:36:39.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:36:39.191] Loaded PowerVR consumer services. [2025-09-23 23:36:39.335] Waiting data available... [2025-09-23 23:36:39.367] 512+0 records in [2025-09-23 23:36:39.367] 512+0 records out [2025-09-23 23:36:39.414] Starting syslogd/klogd: done [2025-09-23 23:36:39.430] DML Start [2025-09-23 23:36:39.607] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:36:39.847] DML res1: 0 [2025-09-23 23:36:40.293] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:36:40.293] Read Success [2025-09-23 23:36:40.293] Verifying certificate... [2025-09-23 23:36:40.549] Verified OK [2025-09-23 23:36:40.581] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:36:42.324] Verified OK [2025-09-23 23:36:42.324] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:36:42.938] Verified OK [2025-09-23 23:36:42.938] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:36:45.369] fs.protected_hardlinks = 1 [2025-09-23 23:36:45.369] fs.protected_symlinks = 1 [2025-09-23 23:36:45.385] kernel.modules_disabled = 1 [2025-09-23 23:36:45.576] [2025-09-23 23:36:45.576] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:36:46.856] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:36:54.631] SBL1:1210.0.1.0 [2025-09-23 23:36:54.663] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:36:56.245] SBL2:1210.0.1.0 [2025-09-23 23:36:56.293] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:36:56.390] j-A [2025-09-23 23:37:03.744] The R5 Autosar Classic is running [2025-09-23 23:37:03.767] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:37:03.767] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:37:04.375] INIT: version 2.96 booting [2025-09-23 23:37:04.487] INIT: Entering runlevel: 5 [2025-09-23 23:37:04.647] mtd24 attached [2025-09-23 23:37:04.647] mtd28 attached [2025-09-23 23:37:04.663] mtd32 attached [2025-09-23 23:37:04.711] ubi1:animations is mounted. [2025-09-23 23:37:04.711] RTNETLINK answers: File exists [2025-09-23 23:37:04.774] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:37:04.774] ubi0:textures is mounted. [2025-09-23 23:37:04.774] ubi2:dml_code is mounted. [2025-09-23 23:37:04.774] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:37:04.774] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:37:04.774] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:37:04.774] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:37:04.774] data.LB_FadeInType0=100 [2025-09-23 23:37:04.774] data.CHLH_FadeInType0=0 [2025-09-23 23:37:04.774] data.WU_FadeInDelay=0 [2025-09-23 23:37:04.774] max_time_out=0 [2025-09-23 23:37:04.774] No splash screen [2025-09-23 23:37:04.774] stop dss Done [2025-09-23 23:37:04.855] /dev/mem opened. [2025-09-23 23:37:04.855] Memory mapped at address 0xffffbb953000. [2025-09-23 23:37:04.855] Read at address 0x00600018 (0xffffbb953018): 0x00000000 [2025-09-23 23:37:04.855] Write at address 0x00600018 (0xffffbb953018): 0x00400040, readback 0x00400040 [2025-09-23 23:37:04.855] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:37:04.855] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:37:04.966] Loaded PowerVR consumer services. [2025-09-23 23:37:05.136] Waiting data available... [2025-09-23 23:37:05.136] 512+0 records in [2025-09-23 23:37:05.136] 512+0 records out [2025-09-23 23:37:05.168] Starting syslogd/klogd: done [2025-09-23 23:37:05.184] DML Start [2025-09-23 23:37:05.345] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:37:05.568] DML res1: 0 [2025-09-23 23:37:06.048] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:37:06.048] Read Success [2025-09-23 23:37:06.064] Verifying certificate... [2025-09-23 23:37:06.287] Verified OK [2025-09-23 23:37:06.303] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:37:07.960] Verified OK [2025-09-23 23:37:07.960] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:37:08.578] Verified OK [2025-09-23 23:37:08.578] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:37:11.121] fs.protected_hardlinks = 1 [2025-09-23 23:37:11.137] fs.protected_symlinks = 1 [2025-09-23 23:37:11.137] kernel.modules_disabled = 1 [2025-09-23 23:37:11.329] [2025-09-23 23:37:11.329] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:37:12.636] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:37:20.429] SBL1:1210.0.1.0 [2025-09-23 23:37:20.461] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:37:22.044] SBL2:1210.0.1.0 [2025-09-23 23:37:22.076] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:37:22.188] j-A [2025-09-23 23:37:29.563] The R5 Autosar Classic is running [2025-09-23 23:37:29.563] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:37:29.563] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:37:30.171] INIT: version 2.96 booting [2025-09-23 23:37:30.283] INIT: Entering runlevel: 5 [2025-09-23 23:37:30.442] mtd24 attached [2025-09-23 23:37:30.442] mtd28 attached [2025-09-23 23:37:30.458] mtd32 attached [2025-09-23 23:37:30.507] RTNETLINK answers: File exists [2025-09-23 23:37:30.572] ubi0:textures is mounted. [2025-09-23 23:37:30.572] ubi2:dml_code is mounted. [2025-09-23 23:37:30.572] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:37:30.572] ubi1:animations is mounted. [2025-09-23 23:37:30.572] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:37:30.572] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:37:30.572] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:37:30.572] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:37:30.572] data.LB_FadeInType0=100 [2025-09-23 23:37:30.572] data.CHLH_FadeInType0=0 [2025-09-23 23:37:30.572] data.WU_FadeInDelay=0 [2025-09-23 23:37:30.572] max_time_out=0 [2025-09-23 23:37:30.572] No splash screen [2025-09-23 23:37:30.572] stop dss Done [2025-09-23 23:37:30.620] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:37:30.620] /dev/mem opened. [2025-09-23 23:37:30.651] Memory mapped at address 0xffffa16ae000. [2025-09-23 23:37:30.651] Read at address 0x00600018 (0xffffa16ae018): 0x00000000 [2025-09-23 23:37:30.651] Write at address 0x00600018 (0xffffa16ae018): 0x00400040, readback 0x00400040 [2025-09-23 23:37:30.651] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:37:30.939] Loaded PowerVR consumer services. [2025-09-23 23:37:30.971] Waiting data available... [2025-09-23 23:37:31.003] 512+0 records in [2025-09-23 23:37:31.003] 512+0 records out [2025-09-23 23:37:31.019] Starting syslogd/klogd: done [2025-09-23 23:37:31.035] DML Start [2025-09-23 23:37:31.226] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:37:31.451] DML res1: 0 [2025-09-23 23:37:31.846] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:37:31.846] Read Success [2025-09-23 23:37:31.846] Verifying certificate... [2025-09-23 23:37:32.118] Verified OK [2025-09-23 23:37:32.134] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:37:33.812] Verified OK [2025-09-23 23:37:33.812] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:37:34.386] Verified OK [2025-09-23 23:37:34.386] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:37:35.154] 5495 GC [0] [2025-09-23 23:37:35.218] 5574 GC [1] [2025-09-23 23:37:35.281] 5647 GC [2] [2025-09-23 23:37:35.361] 5715 GC [3] [2025-09-23 23:37:35.425] 5776 GC [4] [2025-09-23 23:37:35.490] 5848 GC [5] [2025-09-23 23:37:35.570] 5916 GC [6] [2025-09-23 23:37:35.633] 5987 GC [7] [2025-09-23 23:37:35.697] 6055 GC [8] [2025-09-23 23:37:35.778] 6127 GC [9] [2025-09-23 23:37:35.841] 6189 GC [10] [2025-09-23 23:37:35.905] 6256 GC [11] [2025-09-23 23:37:35.969] 6327 GC [12] [2025-09-23 23:37:36.033] 6389 GC [13] [2025-09-23 23:37:36.081] 6436 GC [14] [2025-09-23 23:37:36.145] 6497 GC [15] [2025-09-23 23:37:36.193] 6555 GC [16] [2025-09-23 23:37:36.257] 6617 GC [17] [2025-09-23 23:37:36.321] 6669 GC [18] [2025-09-23 23:37:36.369] 6727 GC [19] [2025-09-23 23:37:36.433] 6788 GC [20] [2025-09-23 23:37:36.497] 6844 GC [21] [2025-09-23 23:37:36.561] 6907 GC [22] [2025-09-23 23:37:36.609] 6969 GC [23] [2025-09-23 23:37:36.673] 7026 GC [24] [2025-09-23 23:37:36.737] 7097 GC [25] [2025-09-23 23:37:36.800] 7155 GC [26] [2025-09-23 23:37:36.864] 7217 GC [27] [2025-09-23 23:37:36.929] 7278 GC [28] [2025-09-23 23:37:36.944] fs.protected_hardlinks = 1 [2025-09-23 23:37:36.944] fs.protected_symlinks = 1 [2025-09-23 23:37:36.960] kernel.modules_disabled = 1 [2025-09-23 23:37:36.992] 7359 GC [29] [2025-09-23 23:37:37.008] GC DONE [2025-09-23 23:37:37.136] [2025-09-23 23:37:37.136] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:37:38.380] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:37:46.209] SBL1:1210.0.1.0 [2025-09-23 23:37:46.257] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:37:47.823] SBL2:1210.0.1.0 [2025-09-23 23:37:47.855] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:37:47.968] j-A [2025-09-23 23:37:55.344] The R5 Autosar Classic is running [2025-09-23 23:37:55.344] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:37:55.344] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:37:55.951] INIT: version 2.96 booting [2025-09-23 23:37:56.064] INIT: Entering runlevel: 5 [2025-09-23 23:37:56.207] mtd32 attached [2025-09-23 23:37:56.223] mtd28 attached [2025-09-23 23:37:56.239] mtd24 attached [2025-09-23 23:37:56.255] ubi0:dml_code is mounted. [2025-09-23 23:37:56.271] ubi1:animations is mounted. [2025-09-23 23:37:56.287] RTNETLINK answers: File exists [2025-09-23 23:37:56.339] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:37:56.339] ubi2:textures is mounted. [2025-09-23 23:37:56.339] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:37:56.339] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:37:56.339] data.LB_FadeInType0=100 [2025-09-23 23:37:56.339] data.CHLH_FadeInType0=0 [2025-09-23 23:37:56.339] data.WU_FadeInDelay=0 [2025-09-23 23:37:56.339] max_time_out=0 [2025-09-23 23:37:56.339] No splash screen [2025-09-23 23:37:56.339] stop dss Done [2025-09-23 23:37:56.339] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:37:56.339] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:37:56.412] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:37:56.412] /dev/mem opened. [2025-09-23 23:37:56.412] Memory mapped at address 0xffffbcd87000. [2025-09-23 23:37:56.412] Read at address 0x00600018 (0xffffbcd87018): 0x00000000 [2025-09-23 23:37:56.412] Write at address 0x00600018 (0xffffbcd87018): 0x00400040, readback 0x00400040 [2025-09-23 23:37:56.412] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:37:56.523] Loaded PowerVR consumer services. [2025-09-23 23:37:56.635] 512+0 records in [2025-09-23 23:37:56.635] 512+0 records out [2025-09-23 23:37:56.651] Waiting data available... [2025-09-23 23:37:56.683] Starting syslogd/klogd: done [2025-09-23 23:37:56.699] DML Start [2025-09-23 23:37:56.859] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:37:57.163] DML res1: 0 [2025-09-23 23:37:57.505] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:37:57.505] Read Success [2025-09-23 23:37:57.505] Verifying certificate... [2025-09-23 23:37:57.777] Verified OK [2025-09-23 23:37:57.793] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:37:59.408] Verified OK [2025-09-23 23:37:59.424] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:37:59.983] Verified OK [2025-09-23 23:38:00.004] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:38:02.578] fs.protected_hardlinks = 1 [2025-09-23 23:38:02.578] fs.protected_symlinks = 1 [2025-09-23 23:38:02.594] kernel.modules_disabled = 1 [2025-09-23 23:38:02.786] [2025-09-23 23:38:02.786] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:38:04.177] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:38:11.983] SBL1:1210.0.1.0 [2025-09-23 23:38:12.031] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:38:13.598] SBL2:1210.0.1.0 [2025-09-23 23:38:13.630] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:38:13.741] j-A [2025-09-23 23:38:21.098] The R5 Autosar Classic is running [2025-09-23 23:38:21.098] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:38:21.119] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:38:21.726] INIT: version 2.96 booting [2025-09-23 23:38:21.839] INIT: Entering runlevel: 5 [2025-09-23 23:38:21.983] mtd28 attached [2025-09-23 23:38:21.999] mtd24 attached [2025-09-23 23:38:22.015] mtd32 attached [2025-09-23 23:38:22.120] ubi1:textures is mounted. [2025-09-23 23:38:22.120] ubi0:animations is mounted. [2025-09-23 23:38:22.120] RTNETLINK answers: File exists [2025-09-23 23:38:22.120] ubi2:dml_code is mounted. [2025-09-23 23:38:22.120] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:38:22.120] data.LB_FadeInType0=100 [2025-09-23 23:38:22.120] data.CHLH_FadeInType0=0 [2025-09-23 23:38:22.120] data.WU_FadeInDelay=0 [2025-09-23 23:38:22.120] max_time_out=0 [2025-09-23 23:38:22.120] No splash screen [2025-09-23 23:38:22.120] stop dss Done [2025-09-23 23:38:22.120] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:38:22.120] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:38:22.120] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:38:22.120] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:38:22.151] /dev/mem opened. [2025-09-23 23:38:22.151] Memory mapped at address 0xffffac1e6000. [2025-09-23 23:38:22.177] Read at address 0x00600018 (0xffffac1e6018): 0x00000000 [2025-09-23 23:38:22.177] Write at address 0x00600018 (0xffffac1e6018): 0x00400040, readback 0x00400040 [2025-09-23 23:38:22.257] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:38:22.273] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:38:22.337] Loaded PowerVR consumer services. [2025-09-23 23:38:22.434] 512+0 records in [2025-09-23 23:38:22.434] 512+0 records out [2025-09-23 23:38:22.450] Waiting data available... [2025-09-23 23:38:22.482] Starting syslogd/klogd: done [2025-09-23 23:38:22.497] DML Start [2025-09-23 23:38:22.705] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:38:22.961] DML res1: 0 [2025-09-23 23:38:23.304] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:38:23.304] Read Success [2025-09-23 23:38:23.304] Verifying certificate... [2025-09-23 23:38:23.544] Verified OK [2025-09-23 23:38:23.560] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:38:25.218] Verified OK [2025-09-23 23:38:25.218] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:38:25.873] Verified OK [2025-09-23 23:38:25.873] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:38:28.447] fs.protected_hardlinks = 1 [2025-09-23 23:38:28.463] fs.protected_symlinks = 1 [2025-09-23 23:38:28.463] kernel.modules_disabled = 1 [2025-09-23 23:38:28.654] [2025-09-23 23:38:28.654] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:38:30.012] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:38:37.787] SBL1:1210.0.1.0 [2025-09-23 23:38:37.819] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:38:39.402] SBL2:1210.0.1.0 [2025-09-23 23:38:39.434] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:38:39.546] j-A [2025-09-23 23:38:46.886] The R5 Autosar Classic is running [2025-09-23 23:38:46.911] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:38:46.911] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:38:47.519] INIT: version 2.96 booting [2025-09-23 23:38:47.630] INIT: Entering runlevel: 5 [2025-09-23 23:38:47.790] mtd28 attached [2025-09-23 23:38:47.790] mtd32 attached [2025-09-23 23:38:47.806] mtd24 attached [2025-09-23 23:38:47.854] ubi0:animations is mounted. [2025-09-23 23:38:47.854] RTNETLINK answers: File exists [2025-09-23 23:38:47.913] ubi1:dml_code is mounted. [2025-09-23 23:38:47.913] ubi2:textures is mounted. [2025-09-23 23:38:47.913] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:38:47.913] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:38:47.913] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:38:47.913] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:38:47.913] data.LB_FadeInType0=100 [2025-09-23 23:38:47.913] data.CHLH_FadeInType0=0 [2025-09-23 23:38:47.913] data.WU_FadeInDelay=0 [2025-09-23 23:38:47.913] max_time_out=0 [2025-09-23 23:38:47.913] No splash screen [2025-09-23 23:38:47.913] stop dss Done [2025-09-23 23:38:47.913] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:38:47.998] /dev/mem opened. [2025-09-23 23:38:47.998] Memory mapped at address 0xffffa08f4000. [2025-09-23 23:38:47.998] Read at address 0x00600018 (0xffffa08f4018): 0x00000000 [2025-09-23 23:38:47.998] Write at address 0x00600018 (0xffffa08f4018): 0x00400040, readback 0x00400040 [2025-09-23 23:38:47.998] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:38:47.998] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:38:48.078] Loaded PowerVR consumer services. [2025-09-23 23:38:48.207] 512+0 records in [2025-09-23 23:38:48.207] 512+0 records out [2025-09-23 23:38:48.222] Waiting data available... [2025-09-23 23:38:48.254] Starting syslogd/klogd: done [2025-09-23 23:38:48.270] DML Start [2025-09-23 23:38:48.462] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:38:48.702] DML res1: 0 [2025-09-23 23:38:49.102] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:38:49.122] Read Success [2025-09-23 23:38:49.122] Verifying certificate... [2025-09-23 23:38:49.363] Verified OK [2025-09-23 23:38:49.363] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:38:51.047] Verified OK [2025-09-23 23:38:51.047] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:38:51.700] Verified OK [2025-09-23 23:38:51.700] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:38:54.243] fs.protected_hardlinks = 1 [2025-09-23 23:38:54.259] fs.protected_symlinks = 1 [2025-09-23 23:38:54.259] kernel.modules_disabled = 1 [2025-09-23 23:38:54.451] [2025-09-23 23:38:54.451] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:38:55.784] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:39:03.579] SBL1:1210.0.1.0 [2025-09-23 23:39:03.627] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:39:05.194] SBL2:1210.0.1.0 [2025-09-23 23:39:05.226] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:39:05.338] j-A [2025-09-23 23:39:12.709] The R5 Autosar Classic is running [2025-09-23 23:39:12.709] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:39:12.709] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:39:13.316] INIT: version 2.96 booting [2025-09-23 23:39:13.429] INIT: Entering runlevel: 5 [2025-09-23 23:39:13.589] mtd28 attached [2025-09-23 23:39:13.589] mtd24 attached [2025-09-23 23:39:13.620] mtd32 attached [2025-09-23 23:39:13.636] ubi0:animations is mounted. [2025-09-23 23:39:13.652] ubi1:textures is mounted. [2025-09-23 23:39:13.723] RTNETLINK answers: File exists [2025-09-23 23:39:13.723] ubi2:dml_code is mounted. [2025-09-23 23:39:13.723] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:39:13.723] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:39:13.723] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:39:13.723] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:39:13.723] data.LB_FadeInType0=100 [2025-09-23 23:39:13.723] data.CHLH_FadeInType0=0 [2025-09-23 23:39:13.723] data.WU_FadeInDelay=0 [2025-09-23 23:39:13.723] max_time_out=0 [2025-09-23 23:39:13.723] No splash screen [2025-09-23 23:39:13.723] stop dss Done [2025-09-23 23:39:13.723] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:39:13.755] /dev/mem opened. [2025-09-23 23:39:13.787] Memory mapped at address 0xffffa50fa000. [2025-09-23 23:39:13.787] Read at address 0x00600018 (0xffffa50fa018): 0x00000000 [2025-09-23 23:39:13.787] Write at address 0x00600018 (0xffffa50fa018): 0x00400040, readback 0x00400040 [2025-09-23 23:39:13.803] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:39:13.826] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:39:13.907] Loaded PowerVR consumer services. [2025-09-23 23:39:14.002] 512+0 records in [2025-09-23 23:39:14.002] 512+0 records out [2025-09-23 23:39:14.034] Starting syslogd/klogd: Waiting data available... [2025-09-23 23:39:14.066] done [2025-09-23 23:39:14.066] DML Start [2025-09-23 23:39:14.258] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:39:14.466] DML res1: 0 [2025-09-23 23:39:14.946] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:39:14.946] Read Success [2025-09-23 23:39:14.946] Verifying certificate... [2025-09-23 23:39:15.201] Verified OK [2025-09-23 23:39:15.217] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:39:16.896] Verified OK [2025-09-23 23:39:16.896] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:39:17.488] Verified OK [2025-09-23 23:39:17.488] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:39:20.143] fs.protected_hardlinks = 1 [2025-09-23 23:39:20.143] fs.protected_symlinks = 1 [2025-09-23 23:39:20.159] kernel.modules_disabled = 1 [2025-09-23 23:39:20.351] [2025-09-23 23:39:20.351] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:39:21.566] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:39:29.372] SBL1:1210.0.1.0 [2025-09-23 23:39:29.420] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:39:30.987] SBL2:1210.0.1.0 [2025-09-23 23:39:31.019] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:39:31.131] j-A [2025-09-23 23:39:38.504] The R5 Autosar Classic is running [2025-09-23 23:39:38.504] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:39:38.504] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:39:39.112] INIT: version 2.96 booting [2025-09-23 23:39:39.223] INIT: Entering runlevel: 5 [2025-09-23 23:39:39.367] mtd24 attached [2025-09-23 23:39:39.383] mtd32 attached [2025-09-23 23:39:39.399] mtd28 attached [2025-09-23 23:39:39.431] ubi0:textures is mounted. [2025-09-23 23:39:39.447] RTNETLINK answers: File exists [2025-09-23 23:39:39.485] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:39:39.485] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:39:39.485] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:39:39.485] ubi2:animations is mounted. [2025-09-23 23:39:39.485] ubi1:dml_code is mounted. [2025-09-23 23:39:39.485] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:39:39.485] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:39:39.509] data.LB_FadeInType0=100 [2025-09-23 23:39:39.509] data.CHLH_FadeInType0=0 [2025-09-23 23:39:39.509] data.WU_FadeInDelay=0 [2025-09-23 23:39:39.509] max_time_out=0 [2025-09-23 23:39:39.509] No splash screen [2025-09-23 23:39:39.509] stop dss Done [2025-09-23 23:39:39.525] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:39:39.525] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:39:39.557] /dev/mem opened. [2025-09-23 23:39:39.589] Memory mapped at address 0xffffbf599000. [2025-09-23 23:39:39.589] Read at address 0x00600018 (0xffffbf599018): 0x00000000 [2025-09-23 23:39:39.589] Write at address 0x00600018 (0xffffbf599018): 0x00400040, readback 0x00400040 [2025-09-23 23:39:39.701] Loaded PowerVR consumer services. [2025-09-23 23:39:39.825] Waiting data available... [2025-09-23 23:39:39.825] 512+0 records in [2025-09-23 23:39:39.825] 512+0 records out [2025-09-23 23:39:39.857] Starting syslogd/klogd: done [2025-09-23 23:39:39.874] DML Start [2025-09-23 23:39:40.081] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:39:40.289] DML res1: 0 [2025-09-23 23:39:40.729] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:39:40.729] Read Success [2025-09-23 23:39:40.729] Verifying certificate... [2025-09-23 23:39:40.969] Verified OK [2025-09-23 23:39:40.984] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:39:42.728] Verified OK [2025-09-23 23:39:42.728] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:39:43.303] Verified OK [2025-09-23 23:39:43.303] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:39:45.894] fs.protected_hardlinks = 1 [2025-09-23 23:39:45.894] fs.protected_symlinks = 1 [2025-09-23 23:39:45.910] kernel.modules_disabled = 1 [2025-09-23 23:39:46.102] [2025-09-23 23:39:46.102] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:39:47.385] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:39:55.171] SBL1:1210.0.1.0 [2025-09-23 23:39:55.203] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:39:56.786] SBL2:1210.0.1.0 [2025-09-23 23:39:56.818] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:39:56.930] j-A [2025-09-23 23:40:04.268] The R5 Autosar Classic is running [2025-09-23 23:40:04.300] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:40:04.300] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:40:04.907] INIT: version 2.96 booting [2025-09-23 23:40:05.019] INIT: Entering runlevel: 5 [2025-09-23 23:40:05.163] mtd24 attached [2025-09-23 23:40:05.179] mtd28 attached [2025-09-23 23:40:05.195] mtd32 attached [2025-09-23 23:40:05.227] ubi0:textures is mounted. [2025-09-23 23:40:05.243] RTNETLINK answers: File exists [2025-09-23 23:40:05.304] ubi1:animations is mounted. [2025-09-23 23:40:05.304] ubi2:dml_code is mounted. [2025-09-23 23:40:05.304] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:40:05.304] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:40:05.304] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:40:05.304] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:40:05.304] data.LB_FadeInType0=100 [2025-09-23 23:40:05.304] data.CHLH_FadeInType0=0 [2025-09-23 23:40:05.304] data.WU_FadeInDelay=0 [2025-09-23 23:40:05.304] max_time_out=0 [2025-09-23 23:40:05.304] No splash screen [2025-09-23 23:40:05.304] stop dss Done [2025-09-23 23:40:05.304] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:40:05.378] /dev/mem opened. [2025-09-23 23:40:05.378] Memory mapped at address 0xffffa6c84000. [2025-09-23 23:40:05.378] Read at address 0x00600018 (0xffffa6c84018): 0x00000000 [2025-09-23 23:40:05.378] Write at address 0x00600018 (0xffffa6c84018): 0x00400040, readback 0x00400040 [2025-09-23 23:40:05.378] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:40:05.378] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:40:05.491] Loaded PowerVR consumer services. [2025-09-23 23:40:05.603] 512+0 records in [2025-09-23 23:40:05.603] 512+0 records out [2025-09-23 23:40:05.619] Waiting data available... [2025-09-23 23:40:05.651] Starting syslogd/klogd: done [2025-09-23 23:40:05.667] DML Start [2025-09-23 23:40:05.875] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:40:06.099] DML res1: 0 [2025-09-23 23:40:06.514] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:40:06.530] Read Success [2025-09-23 23:40:06.530] Verifying certificate... [2025-09-23 23:40:06.818] Verified OK [2025-09-23 23:40:06.834] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:40:08.481] Verified OK [2025-09-23 23:40:08.481] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:40:09.072] Verified OK [2025-09-23 23:40:09.072] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:40:11.791] fs.protected_hardlinks = 1 [2025-09-23 23:40:11.791] fs.protected_symlinks = 1 [2025-09-23 23:40:11.807] kernel.modules_disabled = 1 [2025-09-23 23:40:11.999] [2025-09-23 23:40:11.999] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:40:13.165] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:40:20.966] SBL1:1210.0.1.0 [2025-09-23 23:40:21.014] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:40:22.581] SBL2:1210.0.1.0 [2025-09-23 23:40:22.613] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:40:22.724] j-A [2025-09-23 23:40:30.099] The R5 Autosar Classic is running [2025-09-23 23:40:30.099] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:40:30.099] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:40:30.707] INIT: version 2.96 booting [2025-09-23 23:40:30.819] INIT: Entering runlevel: 5 [2025-09-23 23:40:30.979] mtd32 attached [2025-09-23 23:40:30.979] mtd24 attached [2025-09-23 23:40:30.995] mtd28 attached [2025-09-23 23:40:31.027] ubi0:dml_code is mounted. [2025-09-23 23:40:31.043] RTNETLINK answers: File exists [2025-09-23 23:40:31.043] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:40:31.080] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:40:31.080] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:40:31.080] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:40:31.080] ubi1:textures is mounted. [2025-09-23 23:40:31.080] ubi2:animations is mounted. [2025-09-23 23:40:31.080] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:40:31.107] data.LB_FadeInType0=100 [2025-09-23 23:40:31.107] data.CHLH_FadeInType0=0 [2025-09-23 23:40:31.107] data.WU_FadeInDelay=0 [2025-09-23 23:40:31.107] max_time_out=0 [2025-09-23 23:40:31.107] No splash screen [2025-09-23 23:40:31.107] stop dss Done [2025-09-23 23:40:31.139] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:40:31.172] /dev/mem opened. [2025-09-23 23:40:31.172] Memory mapped at address 0xffff8c47a000. [2025-09-23 23:40:31.172] Read at address 0x00600018 (0xffff8c47a018): 0x00000000 [2025-09-23 23:40:31.172] Write at address 0x00600018 (0xffff8c47a018): 0x00400040, readback 0x00400040 [2025-09-23 23:40:31.172] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:40:31.285] Loaded PowerVR consumer services. [2025-09-23 23:40:31.396] 512+0 records in [2025-09-23 23:40:31.396] 512+0 records out [2025-09-23 23:40:31.396] Waiting data available... [2025-09-23 23:40:31.444] Starting syslogd/klogd: done [2025-09-23 23:40:31.460] DML Start [2025-09-23 23:40:31.652] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:40:31.860] DML res1: 0 [2025-09-23 23:40:32.322] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:40:32.322] Read Success [2025-09-23 23:40:32.322] Verifying certificate... [2025-09-23 23:40:32.593] Verified OK [2025-09-23 23:40:32.609] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:40:34.278] Verified OK [2025-09-23 23:40:34.278] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:40:34.821] Verified OK [2025-09-23 23:40:34.842] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:40:37.444] fs.protected_hardlinks = 1 [2025-09-23 23:40:37.444] fs.protected_symlinks = 1 [2025-09-23 23:40:37.444] kernel.modules_disabled = 1 [2025-09-23 23:40:37.636] [2025-09-23 23:40:37.636] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:40:38.959] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:40:46.757] SBL1:1210.0.1.0 [2025-09-23 23:40:46.805] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:40:48.373] SBL2:1210.0.1.0 [2025-09-23 23:40:48.420] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:40:48.516] j-A [2025-09-23 23:40:55.871] The R5 Autosar Classic is running [2025-09-23 23:40:55.891] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:40:55.891] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:40:56.499] INIT: version 2.96 booting [2025-09-23 23:40:56.611] INIT: Entering runlevel: 5 [2025-09-23 23:40:56.771] mtd32 attached [2025-09-23 23:40:56.787] mtd24 attached [2025-09-23 23:40:56.787] mtd28 attached [2025-09-23 23:40:56.835] RTNETLINK answers: File exists [2025-09-23 23:40:56.904] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:40:56.904] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:40:56.904] ubi0:dml_code is mounted. [2025-09-23 23:40:56.904] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:40:56.904] ubi1:textures is mounted. [2025-09-23 23:40:56.904] ubi2:animations is mounted. [2025-09-23 23:40:56.904] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:40:56.904] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:40:56.904] data.LB_FadeInType0=100 [2025-09-23 23:40:56.904] data.CHLH_FadeInType0=0 [2025-09-23 23:40:56.904] data.WU_FadeInDelay=0 [2025-09-23 23:40:56.904] max_time_out=0 [2025-09-23 23:40:56.904] No splash screen [2025-09-23 23:40:56.904] stop dss Done [2025-09-23 23:40:56.966] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:40:56.966] /dev/mem opened. [2025-09-23 23:40:56.966] Memory mapped at address 0xffff9a241000. [2025-09-23 23:40:56.966] Read at address 0x00600018 (0xffff9a241018): 0x00000000 [2025-09-23 23:40:56.966] Write at address 0x00600018 (0xffff9a241018): 0x00400040, readback 0x00400040 [2025-09-23 23:40:56.966] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:40:57.142] Loaded PowerVR consumer services. [2025-09-23 23:40:57.190] 512+0 records in [2025-09-23 23:40:57.190] 512+0 records out [2025-09-23 23:40:57.222] Waiting data available... [2025-09-23 23:40:57.238] Starting syslogd/klogd: done [2025-09-23 23:40:57.254] DML Start [2025-09-23 23:40:57.414] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:40:57.622] DML res1: 0 [2025-09-23 23:40:58.128] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:40:58.128] Read Success [2025-09-23 23:40:58.128] Verifying certificate... [2025-09-23 23:40:58.352] Verified OK [2025-09-23 23:40:58.368] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:40:59.993] Verified OK [2025-09-23 23:40:59.993] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:41:00.624] Verified OK [2025-09-23 23:41:00.624] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:41:03.229] fs.protected_hardlinks = 1 [2025-09-23 23:41:03.245] fs.protected_symlinks = 1 [2025-09-23 23:41:03.245] kernel.modules_disabled = 1 [2025-09-23 23:41:03.422] [2025-09-23 23:41:03.422] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:41:04.765] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:41:12.555] SBL1:1210.0.1.0 [2025-09-23 23:41:12.586] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:41:14.169] SBL2:1210.0.1.0 [2025-09-23 23:41:14.201] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:41:14.313] j-A [2025-09-23 23:41:21.651] The R5 Autosar Classic is running [2025-09-23 23:41:21.682] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:41:21.682] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:41:22.290] INIT: version 2.96 booting [2025-09-23 23:41:22.402] INIT: Entering runlevel: 5 [2025-09-23 23:41:22.562] mtd32 attached [2025-09-23 23:41:22.562] mtd24 attached [2025-09-23 23:41:22.594] mtd28 attached [2025-09-23 23:41:22.610] ubi0:dml_code is mounted. [2025-09-23 23:41:22.626] ubi1:textures is mounted. [2025-09-23 23:41:22.689] RTNETLINK answers: File exists [2025-09-23 23:41:22.689] ubi2:animations is mounted. [2025-09-23 23:41:22.689] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:41:22.689] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:41:22.689] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:41:22.689] data.LB_FadeInType0=100 [2025-09-23 23:41:22.689] data.CHLH_FadeInType0=0 [2025-09-23 23:41:22.689] data.WU_FadeInDelay=0 [2025-09-23 23:41:22.689] max_time_out=0 [2025-09-23 23:41:22.689] No splash screen [2025-09-23 23:41:22.689] stop dss Done [2025-09-23 23:41:22.689] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:41:22.689] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:41:22.745] /dev/mem opened. [2025-09-23 23:41:22.745] Memory mapped at address 0xffff874ef000. [2025-09-23 23:41:22.745] Read at address 0x00600018 (0xffff874ef018): 0x00000000 [2025-09-23 23:41:22.745] Write at address 0x00600018 (0xffff874ef018): 0x00400040, readback 0x00400040 [2025-09-23 23:41:22.794] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:41:22.810] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:41:22.873] Loaded PowerVR consumer services. [2025-09-23 23:41:23.016] Waiting data available... [2025-09-23 23:41:23.016] 512+0 records in [2025-09-23 23:41:23.016] 512+0 records out [2025-09-23 23:41:23.049] Starting syslogd/klogd: done [2025-09-23 23:41:23.065] DML Start [2025-09-23 23:41:23.240] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:41:23.480] DML res1: 0 [2025-09-23 23:41:23.923] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:41:23.923] Read Success [2025-09-23 23:41:23.923] Verifying certificate... [2025-09-23 23:41:24.147] Verified OK [2025-09-23 23:41:24.163] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:41:25.730] Verified OK [2025-09-23 23:41:25.730] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:41:26.321] Verified OK [2025-09-23 23:41:26.321] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:41:29.023] fs.protected_hardlinks = 1 [2025-09-23 23:41:29.023] fs.protected_symlinks = 1 [2025-09-23 23:41:29.039] kernel.modules_disabled = 1 [2025-09-23 23:41:29.231] [2025-09-23 23:41:29.231] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:41:30.573] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:41:38.342] SBL1:1210.0.1.0 [2025-09-23 23:41:38.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:41:39.956] SBL2:1210.0.1.0 [2025-09-23 23:41:39.988] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:41:40.085] j-A [2025-09-23 23:41:47.441] The R5 Autosar Classic is running [2025-09-23 23:41:47.464] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:41:47.464] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:41:48.071] INIT: version 2.96 booting [2025-09-23 23:41:48.183] INIT: Entering runlevel: 5 [2025-09-23 23:41:48.343] mtd28 attached [2025-09-23 23:41:48.343] mtd32 attached [2025-09-23 23:41:48.359] mtd24 attached [2025-09-23 23:41:48.407] ubi0:animations is mounted. [2025-09-23 23:41:48.407] RTNETLINK answers: File exists [2025-09-23 23:41:48.466] ubi2:textures is mounted. [2025-09-23 23:41:48.466] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:41:48.466] ubi1:dml_code is mounted. [2025-09-23 23:41:48.466] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:41:48.466] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:41:48.466] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:41:48.466] data.LB_FadeInType0=100 [2025-09-23 23:41:48.466] data.CHLH_FadeInType0=0 [2025-09-23 23:41:48.466] data.WU_FadeInDelay=0 [2025-09-23 23:41:48.466] max_time_out=0 [2025-09-23 23:41:48.466] No splash screen [2025-09-23 23:41:48.466] stop dss Done [2025-09-23 23:41:48.466] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:41:48.544] /dev/mem opened. [2025-09-23 23:41:48.544] Memory mapped at address 0xffffab652000. [2025-09-23 23:41:48.544] Read at address 0x00600018 (0xffffab652018): 0x00000000 [2025-09-23 23:41:48.544] Write at address 0x00600018 (0xffffab652018): 0x00400040, readback 0x00400040 [2025-09-23 23:41:48.544] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:41:48.544] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:41:48.656] Loaded PowerVR consumer services. [2025-09-23 23:41:48.768] 512+0 records in [2025-09-23 23:41:48.768] 512+0 records out [2025-09-23 23:41:48.784] Waiting data available... [2025-09-23 23:41:48.816] Starting syslogd/klogd: done [2025-09-23 23:41:48.832] DML Start [2025-09-23 23:41:48.992] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:41:49.232] DML res1: 0 [2025-09-23 23:41:49.678] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:41:49.678] Read Success [2025-09-23 23:41:49.678] Verifying certificate... [2025-09-23 23:41:49.950] Verified OK [2025-09-23 23:41:49.966] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:41:51.723] Verified OK [2025-09-23 23:41:51.723] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:41:52.289] Verified OK [2025-09-23 23:41:52.289] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:41:54.847] fs.protected_hardlinks = 1 [2025-09-23 23:41:54.863] fs.protected_symlinks = 1 [2025-09-23 23:41:54.863] kernel.modules_disabled = 1 [2025-09-23 23:41:55.055] [2025-09-23 23:41:55.055] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:41:56.315] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:42:04.116] SBL1:1210.0.1.0 [2025-09-23 23:42:04.164] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:42:05.731] SBL2:1210.0.1.0 [2025-09-23 23:42:05.763] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:42:05.874] j-A [2025-09-23 23:42:13.247] The R5 Autosar Classic is running [2025-09-23 23:42:13.247] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:42:13.247] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:42:13.854] INIT: version 2.96 booting [2025-09-23 23:42:13.966] INIT: Entering runlevel: 5 [2025-09-23 23:42:14.110] mtd28 attached [2025-09-23 23:42:14.127] mtd24 attached [2025-09-23 23:42:14.142] mtd32 attached [2025-09-23 23:42:14.190] ubi0:animations is mounted. [2025-09-23 23:42:14.190] RTNETLINK answers: File exists [2025-09-23 23:42:14.249] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:42:14.249] ubi1:textures is mounted. [2025-09-23 23:42:14.249] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:42:14.249] ubi2:dml_code is mounted. [2025-09-23 23:42:14.249] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:42:14.249] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:42:14.249] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:42:14.249] data.LB_FadeInType0=100 [2025-09-23 23:42:14.249] data.CHLH_FadeInType0=0 [2025-09-23 23:42:14.249] data.WU_FadeInDelay=0 [2025-09-23 23:42:14.249] max_time_out=0 [2025-09-23 23:42:14.249] No splash screen [2025-09-23 23:42:14.249] stop dss Done [2025-09-23 23:42:14.321] /dev/mem opened. [2025-09-23 23:42:14.321] Memory mapped at address 0xffffa8036000. [2025-09-23 23:42:14.321] Read at address 0x00600018 (0xffffa8036018): 0x00000000 [2025-09-23 23:42:14.321] Write at address 0x00600018 (0xffffa8036018): 0x00400040, readback 0x00400040 [2025-09-23 23:42:14.321] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:42:14.337] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:42:14.481] Loaded PowerVR consumer services. [2025-09-23 23:42:14.545] 512+0 records in [2025-09-23 23:42:14.561] 512+0 records out [2025-09-23 23:42:14.577] Waiting data available... [2025-09-23 23:42:14.609] Starting syslogd/klogd: done [2025-09-23 23:42:14.625] DML Start [2025-09-23 23:42:14.817] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:42:15.073] DML res1: 0 [2025-09-23 23:42:15.434] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:42:15.434] Read Success [2025-09-23 23:42:15.434] Verifying certificate... [2025-09-23 23:42:15.690] Verified OK [2025-09-23 23:42:15.706] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:42:17.326] Verified OK [2025-09-23 23:42:17.326] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:42:17.908] Verified OK [2025-09-23 23:42:17.908] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:42:20.594] fs.protected_hardlinks = 1 [2025-09-23 23:42:20.609] fs.protected_symlinks = 1 [2025-09-23 23:42:20.609] kernel.modules_disabled = 1 [2025-09-23 23:42:20.801] [2025-09-23 23:42:20.801] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:42:22.124] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:42:29.892] SBL1:1210.0.1.0 [2025-09-23 23:42:29.940] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:42:31.507] SBL2:1210.0.1.0 [2025-09-23 23:42:31.539] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:42:31.651] j-A [2025-09-23 23:42:39.025] The R5 Autosar Classic is running [2025-09-23 23:42:39.025] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:42:39.025] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:42:39.633] INIT: version 2.96 booting [2025-09-23 23:42:39.744] INIT: Entering runlevel: 5 [2025-09-23 23:42:39.888] mtd24 attached [2025-09-23 23:42:39.904] mtd32 attached [2025-09-23 23:42:39.920] mtd28 attached [2025-09-23 23:42:39.952] ubi0:textures is mounted. [2025-09-23 23:42:39.952] RTNETLINK answers: File exists [2025-09-23 23:42:40.004] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:42:40.004] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:42:40.004] ubi2:animations is mounted. [2025-09-23 23:42:40.004] ubi1:dml_code is mounted. [2025-09-23 23:42:40.004] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:42:40.004] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:42:40.004] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:42:40.004] data.LB_FadeInType0=100 [2025-09-23 23:42:40.004] data.CHLH_FadeInType0=0 [2025-09-23 23:42:40.025] data.WU_FadeInDelay=0 [2025-09-23 23:42:40.025] max_time_out=0 [2025-09-23 23:42:40.025] No splash screen [2025-09-23 23:42:40.025] stop dss Done [2025-09-23 23:42:40.072] /dev/mem opened. [2025-09-23 23:42:40.072] Memory mapped at address 0xffff8c095000. [2025-09-23 23:42:40.108] Read at address 0x00600018 (0xffff8c095018): 0x00000000 [2025-09-23 23:42:40.108] Write at address 0x00600018 (0xffff8c095018): 0x00400040, readback 0x00400040 [2025-09-23 23:42:40.108] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:42:40.108] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:42:40.252] Loaded PowerVR consumer services. [2025-09-23 23:42:40.316] 512+0 records in [2025-09-23 23:42:40.316] 512+0 records out [2025-09-23 23:42:40.364] Waiting data available... [2025-09-23 23:42:40.364] Starting syslogd/klogd: done [2025-09-23 23:42:40.380] DML Start [2025-09-23 23:42:40.556] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:42:40.780] DML res1: 0 [2025-09-23 23:42:41.260] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:42:41.281] Read Success [2025-09-23 23:42:41.281] Verifying certificate... [2025-09-23 23:42:41.488] Verified OK [2025-09-23 23:42:41.520] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:42:43.115] Verified OK [2025-09-23 23:42:43.115] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:42:43.738] Verified OK [2025-09-23 23:42:43.754] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:42:46.440] fs.protected_hardlinks = 1 [2025-09-23 23:42:46.440] fs.protected_symlinks = 1 [2025-09-23 23:42:46.456] kernel.modules_disabled = 1 [2025-09-23 23:42:46.663] [2025-09-23 23:42:46.663] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:42:47.894] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:42:55.672] SBL1:1210.0.1.0 [2025-09-23 23:42:55.719] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:42:57.287] SBL2:1210.0.1.0 [2025-09-23 23:42:57.318] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:42:57.430] j-A [2025-09-23 23:43:04.806] The R5 Autosar Classic is running [2025-09-23 23:43:04.806] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:43:04.806] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:43:05.415] INIT: version 2.96 booting [2025-09-23 23:43:05.526] INIT: Entering runlevel: 5 [2025-09-23 23:43:05.686] mtd32 attached [2025-09-23 23:43:05.686] mtd24 attached [2025-09-23 23:43:05.702] mtd28 attached [2025-09-23 23:43:05.750] RTNETLINK answers: File exists [2025-09-23 23:43:05.787] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:43:05.787] ubi0:dml_code is mounted. [2025-09-23 23:43:05.787] ubi1:textures is mounted. [2025-09-23 23:43:05.787] ubi2:animations is mounted. [2025-09-23 23:43:05.787] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:43:05.787] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:43:05.787] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:43:05.787] data.LB_FadeInType0=100 [2025-09-23 23:43:05.813] data.CHLH_FadeInType0=0 [2025-09-23 23:43:05.813] data.WU_FadeInDelay=0 [2025-09-23 23:43:05.813] max_time_out=0 [2025-09-23 23:43:05.813] No splash screen [2025-09-23 23:43:05.813] stop dss Done [2025-09-23 23:43:05.813] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:43:05.845] /dev/mem opened. [2025-09-23 23:43:05.877] Memory mapped at address 0xffff9dbaa000. [2025-09-23 23:43:05.877] Read at address 0x00600018 (0xffff9dbaa018): 0x00000000 [2025-09-23 23:43:05.877] Write at address 0x00600018 (0xffff9dbaa018): 0x00400040, readback 0x00400040 [2025-09-23 23:43:05.893] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:43:05.925] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:43:06.085] Loaded PowerVR consumer services. [2025-09-23 23:43:06.117] 512+0 records in [2025-09-23 23:43:06.117] 512+0 records out [2025-09-23 23:43:06.149] Waiting data available... [2025-09-23 23:43:06.164] Starting syslogd/klogd: done [2025-09-23 23:43:06.180] DML Start [2025-09-23 23:43:06.389] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:43:06.629] DML res1: 0 [2025-09-23 23:43:07.001] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:43:07.001] Read Success [2025-09-23 23:43:07.002] Verifying certificate... [2025-09-23 23:43:07.226] Verified OK [2025-09-23 23:43:07.241] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:43:08.878] Verified OK [2025-09-23 23:43:08.878] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:43:09.549] Verified OK [2025-09-23 23:43:09.549] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:43:12.171] fs.protected_hardlinks = 1 [2025-09-23 23:43:12.202] fs.protected_symlinks = 1 [2025-09-23 23:43:12.202] kernel.modules_disabled = 1 [2025-09-23 23:43:12.394] [2025-09-23 23:43:12.394] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:43:13.689] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:43:21.464] SBL1:1210.0.1.0 [2025-09-23 23:43:21.512] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:43:23.079] SBL2:1210.0.1.0 [2025-09-23 23:43:23.111] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 23:43:23.223] j-A [2025-09-23 23:43:30.596] The R5 Autosar Classic is running [2025-09-23 23:43:30.596] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:43:30.596] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:43:31.204] INIT: version 2.96 booting [2025-09-23 23:43:31.315] INIT: Entering runlevel: 5 [2025-09-23 23:43:31.476] mtd24 attached [2025-09-23 23:43:31.492] mtd32 attached [2025-09-23 23:43:31.508] mtd28 attached [2025-09-23 23:43:31.524] ubi0:textures is mounted. [2025-09-23 23:43:31.540] ubi1:dml_code is mounted. [2025-09-23 23:43:31.610] ubi2:animations is mounted. [2025-09-23 23:43:31.610] RTNETLINK answers: File exists [2025-09-23 23:43:31.610] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:43:31.610] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:43:31.610] data.LB_FadeInType0=100 [2025-09-23 23:43:31.610] data.CHLH_FadeInType0=0 [2025-09-23 23:43:31.610] data.WU_FadeInDelay=0 [2025-09-23 23:43:31.610] max_time_out=0 [2025-09-23 23:43:31.610] No splash screen [2025-09-23 23:43:31.610] stop dss Done [2025-09-23 23:43:31.610] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:43:31.610] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:43:31.610] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:43:31.642] /dev/mem opened. [2025-09-23 23:43:31.668] Memory mapped at address 0xffff9fd25000. [2025-09-23 23:43:31.668] Read at address 0x00600018 (0xffff9fd25018): 0x00000000 [2025-09-23 23:43:31.668] Write at address 0x00600018 (0xffff9fd25018): 0x00400040, readback 0x00400040 [2025-09-23 23:43:31.697] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:43:31.697] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:43:31.808] Loaded PowerVR consumer services. [2025-09-23 23:43:31.904] 512+0 records in [2025-09-23 23:43:31.904] 512+0 records out [2025-09-23 23:43:31.936] Waiting data available... [2025-09-23 23:43:31.952] Starting syslogd/klogd: done [2025-09-23 23:43:31.984] DML Start [2025-09-23 23:43:32.160] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:43:32.383] DML res1: 0 [2025-09-23 23:43:32.855] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:43:32.855] Read Success [2025-09-23 23:43:32.855] Verifying certificate... [2025-09-23 23:43:33.143] Verified OK [2025-09-23 23:43:33.158] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:43:34.885] Verified OK [2025-09-23 23:43:34.885] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:43:35.445] Verified OK [2025-09-23 23:43:35.445] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:43:37.956] fs.protected_hardlinks = 1 [2025-09-23 23:43:37.986] fs.protected_symlinks = 1 [2025-09-23 23:43:37.986] kernel.modules_disabled = 1 [2025-09-23 23:43:38.162] [2025-09-23 23:43:38.162] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:43:39.468] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:43:47.231] SBL1:1210.0.1.0 [2025-09-23 23:43:47.279] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:43:48.846] SBL2:1210.0.1.0 [2025-09-23 23:43:48.878] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:43:48.990] j-A [2025-09-23 23:43:56.345] The R5 Autosar Classic is running [2025-09-23 23:43:56.345] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:43:56.366] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:43:56.974] INIT: version 2.96 booting [2025-09-23 23:43:57.085] INIT: Entering runlevel: 5 [2025-09-23 23:43:57.230] mtd24 attached [2025-09-23 23:43:57.245] mtd28 attached [2025-09-23 23:43:57.261] mtd32 attached [2025-09-23 23:43:57.277] ubi0:textures is mounted. [2025-09-23 23:43:57.365] ubi1:animations is mounted. [2025-09-23 23:43:57.365] RTNETLINK answers: File exists [2025-09-23 23:43:57.365] ubi2:dml_code is mounted. [2025-09-23 23:43:57.365] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:43:57.365] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:43:57.365] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:43:57.365] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:43:57.365] data.LB_FadeInType0=100 [2025-09-23 23:43:57.365] data.CHLH_FadeInType0=0 [2025-09-23 23:43:57.365] data.WU_FadeInDelay=0 [2025-09-23 23:43:57.365] max_time_out=0 [2025-09-23 23:43:57.365] No splash screen [2025-09-23 23:43:57.365] stop dss Done [2025-09-23 23:43:57.365] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:43:57.436] /dev/mem opened. [2025-09-23 23:43:57.436] Memory mapped at address 0xffffa26f4000. [2025-09-23 23:43:57.436] Read at address 0x00600018 (0xffffa26f4018): 0x00000000 [2025-09-23 23:43:57.436] Write at address 0x00600018 (0xffffa26f4018): 0x00400040, readback 0x00400040 [2025-09-23 23:43:57.436] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:43:57.436] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:43:57.515] Loaded PowerVR consumer services. [2025-09-23 23:43:57.659] 512+0 records in [2025-09-23 23:43:57.659] 512+0 records out [2025-09-23 23:43:57.675] Waiting data available... [2025-09-23 23:43:57.691] Starting syslogd/klogd: done [2025-09-23 23:43:57.707] DML Start [2025-09-23 23:43:57.899] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:43:58.139] DML res1: 0 [2025-09-23 23:43:58.522] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:43:58.538] Read Success [2025-09-23 23:43:58.538] Verifying certificate... [2025-09-23 23:43:58.779] Verified OK [2025-09-23 23:43:58.810] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:44:00.346] Verified OK [2025-09-23 23:44:00.346] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:44:01.033] Verified OK [2025-09-23 23:44:01.033] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:44:03.751] fs.protected_hardlinks = 1 [2025-09-23 23:44:03.752] fs.protected_symlinks = 1 [2025-09-23 23:44:03.767] kernel.modules_disabled = 1 [2025-09-23 23:44:03.943] [2025-09-23 23:44:03.943] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:44:05.221] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:44:13.002] SBL1:1210.0.1.0 [2025-09-23 23:44:13.034] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:44:14.617] SBL2:1210.0.1.0 [2025-09-23 23:44:14.649] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:44:14.761] j-A [2025-09-23 23:44:22.131] The R5 Autosar Classic is running [2025-09-23 23:44:22.131] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:44:22.131] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:44:22.738] INIT: version 2.96 booting [2025-09-23 23:44:22.866] INIT: Entering runlevel: 5 [2025-09-23 23:44:23.010] mtd24 attached [2025-09-23 23:44:23.026] mtd32 attached [2025-09-23 23:44:23.042] mtd28 attached [2025-09-23 23:44:23.074] ubi0:textures is mounted. [2025-09-23 23:44:23.110] RTNETLINK answers: File exists [2025-09-23 23:44:23.110] ubi2:animations is mounted. [2025-09-23 23:44:23.110] ubi1:dml_code is mounted. [2025-09-23 23:44:23.110] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:44:23.110] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:44:23.110] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:44:23.148] data.LB_FadeInType0=100 [2025-09-23 23:44:23.148] data.CHLH_FadeInType0=0 [2025-09-23 23:44:23.148] data.WU_FadeInDelay=0 [2025-09-23 23:44:23.148] max_time_out=0 [2025-09-23 23:44:23.148] No splash screen [2025-09-23 23:44:23.148] stop dss Done [2025-09-23 23:44:23.148] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:44:23.148] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:44:23.213] /dev/mem opened. [2025-09-23 23:44:23.213] Memory mapped at address 0xffff8db6f000. [2025-09-23 23:44:23.213] Read at address 0x00600018 (0xffff8db6f018): 0x00000000 [2025-09-23 23:44:23.213] Write at address 0x00600018 (0xffff8db6f018): 0x00400040, readback 0x00400040 [2025-09-23 23:44:23.245] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:44:23.261] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:44:23.406] Loaded PowerVR consumer services. [2025-09-23 23:44:23.438] 512+0 records in [2025-09-23 23:44:23.438] 512+0 records out [2025-09-23 23:44:23.486] Starting syslogd/klogd: done [2025-09-23 23:44:23.518] Waiting data available... [2025-09-23 23:44:23.518] DML Start [2025-09-23 23:44:23.710] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:44:23.933] DML res1: 0 [2025-09-23 23:44:24.372] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:44:24.372] Read Success [2025-09-23 23:44:24.372] Verifying certificate... [2025-09-23 23:44:24.580] Verified OK [2025-09-23 23:44:24.596] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:44:26.243] Verified OK [2025-09-23 23:44:26.243] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:44:26.895] Verified OK [2025-09-23 23:44:26.895] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:44:29.562] fs.protected_hardlinks = 1 [2025-09-23 23:44:29.562] fs.protected_symlinks = 1 [2025-09-23 23:44:29.562] kernel.modules_disabled = 1 [2025-09-23 23:44:29.738] [2025-09-23 23:44:29.738] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:44:31.013] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:44:38.765] SBL1:1210.0.1.0 [2025-09-23 23:44:38.813] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:44:40.396] SBL2:1210.0.1.0 [2025-09-23 23:44:40.428] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:44:40.524] j-A [2025-09-23 23:44:47.879] The R5 Autosar Classic is running [2025-09-23 23:44:47.901] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:44:47.901] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:44:48.509] INIT: version 2.96 booting [2025-09-23 23:44:48.621] INIT: Entering runlevel: 5 [2025-09-23 23:44:48.781] mtd24 attached [2025-09-23 23:44:48.796] mtd32 attached [2025-09-23 23:44:48.813] mtd28 attached [2025-09-23 23:44:48.829] ubi0:textures is mounted. [2025-09-23 23:44:48.845] ubi1:dml_code is mounted. [2025-09-23 23:44:48.912] RTNETLINK answers: File exists [2025-09-23 23:44:48.912] ubi2:animations is mounted. [2025-09-23 23:44:48.912] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:44:48.912] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:44:48.912] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:44:48.912] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:44:48.912] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:44:48.912] data.LB_FadeInType0=100 [2025-09-23 23:44:48.912] data.CHLH_FadeInType0=0 [2025-09-23 23:44:48.912] data.WU_FadeInDelay=0 [2025-09-23 23:44:48.912] max_time_out=0 [2025-09-23 23:44:48.912] No splash screen [2025-09-23 23:44:48.912] stop dss Done [2025-09-23 23:44:48.960] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:44:48.960] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:44:48.992] /dev/mem opened. [2025-09-23 23:44:48.992] Memory mapped at address 0xffffaf93a000. [2025-09-23 23:44:48.992] Read at address 0x00600018 (0xffffaf93a018): 0x00000000 [2025-09-23 23:44:48.992] Write at address 0x00600018 (0xffffaf93a018): 0x00400040, readback 0x00400040 [2025-09-23 23:44:49.168] Loaded PowerVR consumer services. [2025-09-23 23:44:49.200] 512+0 records in [2025-09-23 23:44:49.200] 512+0 records out [2025-09-23 23:44:49.264] Starting syslogd/klogd: done [2025-09-23 23:44:49.280] Waiting data available... [2025-09-23 23:44:49.280] DML Start [2025-09-23 23:44:49.455] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:44:49.696] DML res1: 0 [2025-09-23 23:44:50.111] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:44:50.127] Read Success [2025-09-23 23:44:50.127] Verifying certificate... [2025-09-23 23:44:50.367] Verified OK [2025-09-23 23:44:50.383] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:44:52.076] Verified OK [2025-09-23 23:44:52.076] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:44:52.721] Verified OK [2025-09-23 23:44:52.721] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:44:55.376] fs.protected_hardlinks = 1 [2025-09-23 23:44:55.392] fs.protected_symlinks = 1 [2025-09-23 23:44:55.392] kernel.modules_disabled = 1 [2025-09-23 23:44:55.584] [2025-09-23 23:44:55.584] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:44:56.785] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:45:04.553] SBL1:1210.0.1.0 [2025-09-23 23:45:04.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:45:06.167] SBL2:1210.0.1.0 [2025-09-23 23:45:06.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:45:06.312] j-A [2025-09-23 23:45:13.649] The R5 Autosar Classic is running [2025-09-23 23:45:13.674] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:45:13.674] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:45:14.282] INIT: version 2.96 booting [2025-09-23 23:45:14.394] INIT: Entering runlevel: 5 [2025-09-23 23:45:14.554] mtd24 attached [2025-09-23 23:45:14.554] mtd28 attached [2025-09-23 23:45:14.570] mtd32 attached [2025-09-23 23:45:14.618] RTNETLINK answers: File exists [2025-09-23 23:45:14.618] ubi0:textures is mounted. [2025-09-23 23:45:14.678] ubi1:animations is mounted. [2025-09-23 23:45:14.678] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:45:14.678] ubi2:dml_code is mounted. [2025-09-23 23:45:14.678] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:45:14.678] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:45:14.678] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:45:14.678] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:45:14.678] data.LB_FadeInType0=100 [2025-09-23 23:45:14.678] data.CHLH_FadeInType0=0 [2025-09-23 23:45:14.678] data.WU_FadeInDelay=0 [2025-09-23 23:45:14.678] max_time_out=0 [2025-09-23 23:45:14.678] No splash screen [2025-09-23 23:45:14.678] stop dss Done [2025-09-23 23:45:14.756] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:45:14.756] /dev/mem opened. [2025-09-23 23:45:14.756] Memory mapped at address 0xffffabaf3000. [2025-09-23 23:45:14.756] Read at address 0x00600018 (0xffffabaf3018): 0x00000000 [2025-09-23 23:45:14.756] Write at address 0x00600018 (0xffffabaf3018): 0x00400040, readback 0x00400040 [2025-09-23 23:45:14.756] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:45:14.835] Loaded PowerVR consumer services. [2025-09-23 23:45:14.995] 512+0 records in [2025-09-23 23:45:14.995] 512+0 records out [2025-09-23 23:45:14.995] Waiting data available... [2025-09-23 23:45:15.011] Starting syslogd/klogd: done [2025-09-23 23:45:15.043] DML Start [2025-09-23 23:45:15.218] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:45:15.426] DML res1: 0 [2025-09-23 23:45:15.906] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:45:15.923] Read Success [2025-09-23 23:45:15.923] Verifying certificate... [2025-09-23 23:45:16.177] Verified OK [2025-09-23 23:45:16.193] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:45:17.761] Verified OK [2025-09-23 23:45:17.761] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:45:18.352] Verified OK [2025-09-23 23:45:18.352] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:45:21.039] fs.protected_hardlinks = 1 [2025-09-23 23:45:21.055] fs.protected_symlinks = 1 [2025-09-23 23:45:21.055] kernel.modules_disabled = 1 [2025-09-23 23:45:21.263] [2025-09-23 23:45:21.263] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:45:22.563] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:45:30.338] SBL1:1210.0.1.0 [2025-09-23 23:45:30.370] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:45:31.952] SBL2:1210.0.1.0 [2025-09-23 23:45:31.984] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:45:32.079] j-A [2025-09-23 23:45:39.435] The R5 Autosar Classic is running [2025-09-23 23:45:39.457] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:45:39.457] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:45:40.065] INIT: version 2.96 booting [2025-09-23 23:45:40.177] INIT: Entering runlevel: 5 [2025-09-23 23:45:40.337] mtd24 attached [2025-09-23 23:45:40.353] mtd32 attached [2025-09-23 23:45:40.385] ubi0:textures is mounted. [2025-09-23 23:45:40.385] ubi1:dml_code is mounted. [2025-09-23 23:45:40.401] mtd28 attached [2025-09-23 23:45:40.471] RTNETLINK answers: File exists [2025-09-23 23:45:40.471] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:45:40.471] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:45:40.471] ubi2:animations is mounted. [2025-09-23 23:45:40.471] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:45:40.471] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:45:40.471] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:45:40.471] data.LB_FadeInType0=100 [2025-09-23 23:45:40.471] data.CHLH_FadeInType0=0 [2025-09-23 23:45:40.471] data.WU_FadeInDelay=0 [2025-09-23 23:45:40.471] max_time_out=0 [2025-09-23 23:45:40.471] No splash screen [2025-09-23 23:45:40.471] stop dss Done [2025-09-23 23:45:40.503] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:45:40.552] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:45:40.552] /dev/mem opened. [2025-09-23 23:45:40.552] Memory mapped at address 0xffff880b9000. [2025-09-23 23:45:40.552] Read at address 0x00600018 (0xffff880b9018): 0x00000000 [2025-09-23 23:45:40.552] Write at address 0x00600018 (0xffff880b9018): 0x00400040, readback 0x00400040 [2025-09-23 23:45:40.680] Loaded PowerVR consumer services. [2025-09-23 23:45:40.798] Waiting data available... [2025-09-23 23:45:40.798] 512+0 records in [2025-09-23 23:45:40.798] 512+0 records out [2025-09-23 23:45:40.830] Starting syslogd/klogd: done [2025-09-23 23:45:40.846] DML Start [2025-09-23 23:45:41.022] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:45:41.278] DML res1: 0 [2025-09-23 23:45:41.708] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:45:41.708] Read Success [2025-09-23 23:45:41.708] Verifying certificate... [2025-09-23 23:45:41.964] Verified OK [2025-09-23 23:45:41.979] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:45:43.495] Verified OK [2025-09-23 23:45:43.495] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:45:44.051] Verified OK [2025-09-23 23:45:44.051] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:45:46.929] fs.protected_hardlinks = 1 [2025-09-23 23:45:46.929] fs.protected_symlinks = 1 [2025-09-23 23:45:46.945] kernel.modules_disabled = 1 [2025-09-23 23:45:47.137] [2025-09-23 23:45:47.137] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:45:48.349] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:45:56.097] SBL1:1210.0.1.0 [2025-09-23 23:45:56.145] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:45:57.712] SBL2:1210.0.1.0 [2025-09-23 23:45:57.744] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:45:57.856] j-A [2025-09-23 23:46:05.232] The R5 Autosar Classic is running [2025-09-23 23:46:05.232] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:46:05.232] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:46:05.839] INIT: version 2.96 booting [2025-09-23 23:46:05.951] INIT: Entering runlevel: 5 [2025-09-23 23:46:06.095] mtd24 attached [2025-09-23 23:46:06.111] mtd28 attached [2025-09-23 23:46:06.143] mtd32 attached [2025-09-23 23:46:06.175] ubi1:animations is mounted. [2025-09-23 23:46:06.175] RTNETLINK answers: File exists [2025-09-23 23:46:06.199] ubi0:textures is mounted. [2025-09-23 23:46:06.199] ubi2:dml_code is mounted. [2025-09-23 23:46:06.199] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:46:06.240] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:46:06.240] data.LB_FadeInType0=100 [2025-09-23 23:46:06.240] data.CHLH_FadeInType0=0 [2025-09-23 23:46:06.240] data.WU_FadeInDelay=0 [2025-09-23 23:46:06.240] max_time_out=0 [2025-09-23 23:46:06.240] No splash screen [2025-09-23 23:46:06.240] stop dss Done [2025-09-23 23:46:06.240] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:46:06.240] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:46:06.240] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:46:06.271] /dev/mem opened. [2025-09-23 23:46:06.308] Memory mapped at address 0xffffa309a000. [2025-09-23 23:46:06.308] Read at address 0x00600018 (0xffffa309a018): 0x00000000 [2025-09-23 23:46:06.308] Write at address 0x00600018 (0xffffa309a018): 0x00400040, readback 0x00400040 [2025-09-23 23:46:06.308] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:46:06.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:46:06.516] Loaded PowerVR consumer services. [2025-09-23 23:46:06.532] 512+0 records in [2025-09-23 23:46:06.532] 512+0 records out [2025-09-23 23:46:06.581] Waiting data available... [2025-09-23 23:46:06.597] Starting syslogd/klogd: done [2025-09-23 23:46:06.612] DML Start [2025-09-23 23:46:06.788] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:46:06.964] DML res1: 0 [2025-09-23 23:46:07.521] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:46:07.521] Read Success [2025-09-23 23:46:07.521] Verifying certificate... [2025-09-23 23:46:07.777] Verified OK [2025-09-23 23:46:07.809] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:46:09.520] Verified OK [2025-09-23 23:46:09.520] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:46:10.063] Verified OK [2025-09-23 23:46:10.063] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:46:12.541] fs.protected_hardlinks = 1 [2025-09-23 23:46:12.557] fs.protected_symlinks = 1 [2025-09-23 23:46:12.557] kernel.modules_disabled = 1 [2025-09-23 23:46:12.765] [2025-09-23 23:46:12.765] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:46:14.100] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:46:21.887] SBL1:1210.0.1.0 [2025-09-23 23:46:21.918] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:46:23.501] SBL2:1210.0.1.0 [2025-09-23 23:46:23.533] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:46:23.645] j-A [2025-09-23 23:46:30.985] The R5 Autosar Classic is running [2025-09-23 23:46:31.016] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:46:31.016] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:46:31.624] INIT: version 2.96 booting [2025-09-23 23:46:31.736] INIT: Entering runlevel: 5 [2025-09-23 23:46:31.895] mtd32 attached [2025-09-23 23:46:31.895] mtd28 attached [2025-09-23 23:46:31.911] mtd24 attached [2025-09-23 23:46:31.959] RTNETLINK answers: File exists [2025-09-23 23:46:31.959] ubi0:dml_code is mounted. [2025-09-23 23:46:32.002] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:46:32.002] ubi1:animations is mounted. [2025-09-23 23:46:32.002] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:46:32.002] ubi2:textures is mounted. [2025-09-23 23:46:32.002] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:46:32.002] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:46:32.002] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:46:32.002] data.LB_FadeInType0=100 [2025-09-23 23:46:32.002] data.CHLH_FadeInType0=0 [2025-09-23 23:46:32.023] data.WU_FadeInDelay=0 [2025-09-23 23:46:32.023] max_time_out=0 [2025-09-23 23:46:32.023] No splash screen [2025-09-23 23:46:32.023] stop dss Done [2025-09-23 23:46:32.070] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:46:32.070] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:46:32.070] /dev/mem opened. [2025-09-23 23:46:32.070] Memory mapped at address 0xffffbda50000. [2025-09-23 23:46:32.096] Read at address 0x00600018 (0xffffbda50018): 0x00000000 [2025-09-23 23:46:32.096] Write at address 0x00600018 (0xffffbda50018): 0x00400040, readback 0x00400040 [2025-09-23 23:46:32.224] Loaded PowerVR consumer services. [2025-09-23 23:46:32.320] 512+0 records in [2025-09-23 23:46:32.320] 512+0 records out [2025-09-23 23:46:32.336] Waiting data available... [2025-09-23 23:46:32.352] Starting syslogd/klogd: done [2025-09-23 23:46:32.368] DML Start [2025-09-23 23:46:32.560] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:46:32.752] DML res1: 0 [2025-09-23 23:46:33.224] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:46:33.224] Read Success [2025-09-23 23:46:33.224] Verifying certificate... [2025-09-23 23:46:33.463] Verified OK [2025-09-23 23:46:33.479] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:46:35.265] Verified OK [2025-09-23 23:46:35.265] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:46:35.853] Verified OK [2025-09-23 23:46:35.853] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:46:38.395] fs.protected_hardlinks = 1 [2025-09-23 23:46:38.395] fs.protected_symlinks = 1 [2025-09-23 23:46:38.411] kernel.modules_disabled = 1 [2025-09-23 23:46:38.603] [2025-09-23 23:46:38.603] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:46:39.855] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:46:47.661] SBL1:1210.0.1.0 [2025-09-23 23:46:47.709] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:46:49.276] SBL2:1210.0.1.0 [2025-09-23 23:46:49.307] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:46:49.420] j-A [2025-09-23 23:46:56.798] The R5 Autosar Classic is running [2025-09-23 23:46:56.798] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:46:56.798] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:46:57.405] INIT: version 2.96 booting [2025-09-23 23:46:57.517] INIT: Entering runlevel: 5 [2025-09-23 23:46:57.661] mtd24 attached [2025-09-23 23:46:57.677] mtd28 attached [2025-09-23 23:46:57.693] mtd32 attached [2025-09-23 23:46:57.725] ubi0:textures is mounted. [2025-09-23 23:46:57.741] ubi1:animations is mounted. [2025-09-23 23:46:57.804] RTNETLINK answers: File exists [2025-09-23 23:46:57.804] ubi2:dml_code is mounted. [2025-09-23 23:46:57.804] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:46:57.804] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:46:57.804] data.LB_FadeInType0=100 [2025-09-23 23:46:57.804] data.CHLH_FadeInType0=0 [2025-09-23 23:46:57.804] data.WU_FadeInDelay=0 [2025-09-23 23:46:57.804] max_time_out=0 [2025-09-23 23:46:57.804] No splash screen [2025-09-23 23:46:57.804] stop dss Done [2025-09-23 23:46:57.804] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:46:57.804] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:46:57.804] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:46:57.886] /dev/mem opened. [2025-09-23 23:46:57.886] Memory mapped at address 0xffffad86b000. [2025-09-23 23:46:57.886] Read at address 0x00600018 (0xffffad86b018): 0x00000000 [2025-09-23 23:46:57.886] Write at address 0x00600018 (0xffffad86b018): 0x00400040, readback 0x00400040 [2025-09-23 23:46:57.911] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:46:57.911] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:46:57.976] Loaded PowerVR consumer services. [2025-09-23 23:46:58.072] 512+0 records in [2025-09-23 23:46:58.072] 512+0 records out [2025-09-23 23:46:58.119] Starting syslogd/klogd: done [2025-09-23 23:46:58.135] Waiting data available... [2025-09-23 23:46:58.151] DML Start [2025-09-23 23:46:58.311] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:46:58.535] DML res1: 0 [2025-09-23 23:46:59.012] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:46:59.012] Read Success [2025-09-23 23:46:59.012] Verifying certificate... [2025-09-23 23:46:59.235] Verified OK [2025-09-23 23:46:59.251] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:47:00.893] Verified OK [2025-09-23 23:47:00.893] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:47:01.468] Verified OK [2025-09-23 23:47:01.468] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:47:04.123] fs.protected_hardlinks = 1 [2025-09-23 23:47:04.139] fs.protected_symlinks = 1 [2025-09-23 23:47:04.139] kernel.modules_disabled = 1 [2025-09-23 23:47:04.346] [2025-09-23 23:47:04.346] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:47:05.641] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:47:13.464] SBL1:1210.0.1.0 [2025-09-23 23:47:13.496] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:47:15.078] SBL2:1210.0.1.0 [2025-09-23 23:47:15.110] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:47:15.206] j-A [2025-09-23 23:47:22.562] The R5 Autosar Classic is running [2025-09-23 23:47:22.585] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:47:22.585] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:47:23.193] INIT: version 2.96 booting [2025-09-23 23:47:23.304] INIT: Entering runlevel: 5 [2025-09-23 23:47:23.465] mtd24 attached [2025-09-23 23:47:23.481] mtd28 attached [2025-09-23 23:47:23.497] mtd32 attached [2025-09-23 23:47:23.497] ubi0:textures is mounted. [2025-09-23 23:47:23.529] ubi1:animations is mounted. [2025-09-23 23:47:23.529] RTNETLINK answers: File exists [2025-09-23 23:47:23.587] ubi2:dml_code is mounted. [2025-09-23 23:47:23.587] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:47:23.587] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:47:23.587] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:47:23.587] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:47:23.587] data.LB_FadeInType0=100 [2025-09-23 23:47:23.587] data.CHLH_FadeInType0=0 [2025-09-23 23:47:23.587] data.WU_FadeInDelay=0 [2025-09-23 23:47:23.587] max_time_out=0 [2025-09-23 23:47:23.587] No splash screen [2025-09-23 23:47:23.587] stop dss Done [2025-09-23 23:47:23.587] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:47:23.652] /dev/mem opened. [2025-09-23 23:47:23.652] Memory mapped at address 0xffffb04a3000. [2025-09-23 23:47:23.652] Read at address 0x00600018 (0xffffb04a3018): 0x00000000 [2025-09-23 23:47:23.652] Write at address 0x00600018 (0xffffb04a3018): 0x00400040, readback 0x00400040 [2025-09-23 23:47:23.668] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:47:23.701] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:47:23.844] Loaded PowerVR consumer services. [2025-09-23 23:47:23.893] 512+0 records in [2025-09-23 23:47:23.893] 512+0 records out [2025-09-23 23:47:23.925] Starting syslogd/klogd: Waiting data available... [2025-09-23 23:47:23.941] done [2025-09-23 23:47:23.941] DML Start [2025-09-23 23:47:24.116] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:47:24.324] DML res1: 0 [2025-09-23 23:47:24.814] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:47:24.814] Read Success [2025-09-23 23:47:24.814] Verifying certificate... [2025-09-23 23:47:25.037] Verified OK [2025-09-23 23:47:25.053] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:47:26.709] Verified OK [2025-09-23 23:47:26.709] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:47:27.317] Verified OK [2025-09-23 23:47:27.317] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:47:29.955] fs.protected_hardlinks = 1 [2025-09-23 23:47:29.971] fs.protected_symlinks = 1 [2025-09-23 23:47:29.971] kernel.modules_disabled = 1 [2025-09-23 23:47:30.163] [2025-09-23 23:47:30.163] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:47:31.420] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:47:39.207] SBL1:1210.0.1.0 [2025-09-23 23:47:39.255] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:47:40.822] SBL2:1210.0.1.0 [2025-09-23 23:47:40.854] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:47:40.966] j-A [2025-09-23 23:47:48.338] The R5 Autosar Classic is running [2025-09-23 23:47:48.338] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:47:48.338] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:47:48.962] INIT: version 2.96 booting [2025-09-23 23:47:49.074] INIT: Entering runlevel: 5 [2025-09-23 23:47:49.234] mtd28 attached [2025-09-23 23:47:49.234] mtd32 attached [2025-09-23 23:47:49.250] mtd24 attached [2025-09-23 23:47:49.298] ubi0:animations is mounted. [2025-09-23 23:47:49.298] RTNETLINK answers: File exists [2025-09-23 23:47:49.348] ubi2:textures is mounted. [2025-09-23 23:47:49.348] ubi1:dml_code is mounted. [2025-09-23 23:47:49.348] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:47:49.348] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:47:49.348] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:47:49.348] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:47:49.348] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:47:49.348] data.LB_FadeInType0=100 [2025-09-23 23:47:49.348] data.CHLH_FadeInType0=0 [2025-09-23 23:47:49.348] data.WU_FadeInDelay=0 [2025-09-23 23:47:49.348] max_time_out=0 [2025-09-23 23:47:49.348] No splash screen [2025-09-23 23:47:49.348] stop dss Done [2025-09-23 23:47:49.416] /dev/mem opened. [2025-09-23 23:47:49.416] Memory mapped at address 0xffff86e73000. [2025-09-23 23:47:49.416] Read at address 0x00600018 (0xffff86e73018): 0x00000000 [2025-09-23 23:47:49.416] Write at address 0x00600018 (0xffff86e73018): 0x00400040, readback 0x00400040 [2025-09-23 23:47:49.416] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:47:49.432] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:47:49.513] Loaded PowerVR consumer services. [2025-09-23 23:47:49.666] Waiting data available... [2025-09-23 23:47:49.666] 512+0 records in [2025-09-23 23:47:49.666] 512+0 records out [2025-09-23 23:47:49.682] Starting syslogd/klogd: done [2025-09-23 23:47:49.698] DML Start [2025-09-23 23:47:49.890] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:47:50.114] DML res1: 0 [2025-09-23 23:47:50.569] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:47:50.569] Read Success [2025-09-23 23:47:50.569] Verifying certificate... [2025-09-23 23:47:50.793] Verified OK [2025-09-23 23:47:50.809] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:47:52.515] Verified OK [2025-09-23 23:47:52.515] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:47:53.105] Verified OK [2025-09-23 23:47:53.105] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:47:55.631] fs.protected_hardlinks = 1 [2025-09-23 23:47:55.647] fs.protected_symlinks = 1 [2025-09-23 23:47:55.647] kernel.modules_disabled = 1 [2025-09-23 23:47:55.839] [2025-09-23 23:47:55.839] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:47:57.182] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:48:04.998] SBL1:1210.0.1.0 [2025-09-23 23:48:05.030] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:48:06.613] SBL2:1210.0.1.0 [2025-09-23 23:48:06.645] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:48:06.757] j-A [2025-09-23 23:48:14.096] The R5 Autosar Classic is running [2025-09-23 23:48:14.127] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:48:14.127] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:48:14.734] INIT: version 2.96 booting [2025-09-23 23:48:14.830] INIT: Entering runlevel: 5 [2025-09-23 23:48:14.990] mtd28 attached [2025-09-23 23:48:15.006] mtd32 attached [2025-09-23 23:48:15.022] mtd24 attached [2025-09-23 23:48:15.038] ubi0:animations is mounted. [2025-09-23 23:48:15.105] RTNETLINK answers: File exists [2025-09-23 23:48:15.105] ubi1:dml_code is mounted. [2025-09-23 23:48:15.105] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:48:15.105] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:48:15.105] ubi2:textures is mounted. [2025-09-23 23:48:15.105] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:48:15.105] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:48:15.105] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:48:15.105] data.LB_FadeInType0=100 [2025-09-23 23:48:15.125] data.CHLH_FadeInType0=0 [2025-09-23 23:48:15.125] data.WU_FadeInDelay=0 [2025-09-23 23:48:15.125] max_time_out=0 [2025-09-23 23:48:15.125] No splash screen [2025-09-23 23:48:15.125] stop dss Done [2025-09-23 23:48:15.174] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:48:15.174] /dev/mem opened. [2025-09-23 23:48:15.174] Memory mapped at address 0xffffa1e0a000. [2025-09-23 23:48:15.205] Read at address 0x00600018 (0xffffa1e0a018): 0x00000000 [2025-09-23 23:48:15.205] Write at address 0x00600018 (0xffffa1e0a018): 0x00400040, readback 0x00400040 [2025-09-23 23:48:15.205] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:48:15.382] Loaded PowerVR consumer services. [2025-09-23 23:48:15.450] 512+0 records in [2025-09-23 23:48:15.450] 512+0 records out [2025-09-23 23:48:15.450] Waiting data available... [2025-09-23 23:48:15.482] Starting syslogd/klogd: done [2025-09-23 23:48:15.514] DML Start [2025-09-23 23:48:15.691] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:48:15.899] DML res1: 0 [2025-09-23 23:48:16.418] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:48:16.418] Read Success [2025-09-23 23:48:16.418] Verifying certificate... [2025-09-23 23:48:16.642] Verified OK [2025-09-23 23:48:16.657] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:48:18.361] Verified OK [2025-09-23 23:48:18.361] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:48:18.931] Verified OK [2025-09-23 23:48:18.931] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:48:21.489] fs.protected_hardlinks = 1 [2025-09-23 23:48:21.489] fs.protected_symlinks = 1 [2025-09-23 23:48:21.505] kernel.modules_disabled = 1 [2025-09-23 23:48:21.681] [2025-09-23 23:48:21.681] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:48:23.017] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:48:30.793] SBL1:1210.0.1.0 [2025-09-23 23:48:30.825] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:48:32.408] SBL2:1210.0.1.0 [2025-09-23 23:48:32.440] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:48:32.551] j-A [2025-09-23 23:48:39.889] The R5 Autosar Classic is running [2025-09-23 23:48:39.914] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:48:39.914] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:48:40.522] INIT: version 2.96 booting [2025-09-23 23:48:40.635] INIT: Entering runlevel: 5 [2025-09-23 23:48:40.794] mtd24 attached [2025-09-23 23:48:40.810] mtd32 attached [2025-09-23 23:48:40.810] mtd28 attached [2025-09-23 23:48:40.858] ubi0:textures is mounted. [2025-09-23 23:48:40.923] RTNETLINK answers: File exists [2025-09-23 23:48:40.923] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:48:40.923] ubi2:animations is mounted. [2025-09-23 23:48:40.923] ubi1:dml_code is mounted. [2025-09-23 23:48:40.923] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:48:40.923] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:48:40.923] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:48:40.923] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:48:40.923] data.LB_FadeInType0=100 [2025-09-23 23:48:40.923] data.CHLH_FadeInType0=0 [2025-09-23 23:48:40.923] data.WU_FadeInDelay=0 [2025-09-23 23:48:40.923] max_time_out=0 [2025-09-23 23:48:40.923] No splash screen [2025-09-23 23:48:40.923] stop dss Done [2025-09-23 23:48:40.987] /dev/mem opened. [2025-09-23 23:48:40.987] Memory mapped at address 0xffff9eb96000. [2025-09-23 23:48:40.987] Read at address 0x00600018 (0xffff9eb96018): 0x00000000 [2025-09-23 23:48:40.987] Write at address 0x00600018 (0xffff9eb96018): 0x00400040, readback 0x00400040 [2025-09-23 23:48:40.987] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:48:41.003] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:48:41.115] Loaded PowerVR consumer services. [2025-09-23 23:48:41.240] Waiting data available... [2025-09-23 23:48:41.240] 512+0 records in [2025-09-23 23:48:41.240] 512+0 records out [2025-09-23 23:48:41.271] Starting syslogd/klogd: done [2025-09-23 23:48:41.287] DML Start [2025-09-23 23:48:41.527] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:48:41.736] DML res1: 0 [2025-09-23 23:48:42.133] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:48:42.133] Read Success [2025-09-23 23:48:42.133] Verifying certificate... [2025-09-23 23:48:42.389] Verified OK [2025-09-23 23:48:42.405] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:48:44.180] Verified OK [2025-09-23 23:48:44.180] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:48:44.723] Verified OK [2025-09-23 23:48:44.723] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:48:47.426] fs.protected_hardlinks = 1 [2025-09-23 23:48:47.426] fs.protected_symlinks = 1 [2025-09-23 23:48:47.442] kernel.modules_disabled = 1 [2025-09-23 23:48:47.617] [2025-09-23 23:48:47.617] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:48:48.795] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:48:56.558] SBL1:1210.0.1.0 [2025-09-23 23:48:56.606] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:48:58.174] SBL2:1210.0.1.0 [2025-09-23 23:48:58.222] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 23:48:58.317] j-A [2025-09-23 23:49:05.671] The R5 Autosar Classic is running [2025-09-23 23:49:05.692] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:49:05.692] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:49:06.300] INIT: version 2.96 booting [2025-09-23 23:49:06.412] INIT: Entering runlevel: 5 [2025-09-23 23:49:06.571] mtd28 attached [2025-09-23 23:49:06.587] mtd32 attached [2025-09-23 23:49:06.587] mtd24 attached [2025-09-23 23:49:06.636] RTNETLINK answers: File exists [2025-09-23 23:49:06.707] ubi0:animations is mounted. [2025-09-23 23:49:06.707] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:49:06.707] ubi1:dml_code is mounted. [2025-09-23 23:49:06.707] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:49:06.707] ubi2:textures is mounted. [2025-09-23 23:49:06.707] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:49:06.707] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:49:06.707] data.LB_FadeInType0=100 [2025-09-23 23:49:06.707] data.CHLH_FadeInType0=0 [2025-09-23 23:49:06.707] data.WU_FadeInDelay=0 [2025-09-23 23:49:06.707] max_time_out=0 [2025-09-23 23:49:06.707] No splash screen [2025-09-23 23:49:06.707] stop dss Done [2025-09-23 23:49:06.707] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:49:06.799] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:49:06.799] /dev/mem opened. [2025-09-23 23:49:06.799] Memory mapped at address 0xffff85138000. [2025-09-23 23:49:06.799] Read at address 0x00600018 (0xffff85138018): 0x00000000 [2025-09-23 23:49:06.799] Write at address 0x00600018 (0xffff85138018): 0x00400040, readback 0x00400040 [2025-09-23 23:49:06.799] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:49:06.944] Loaded PowerVR consumer services. [2025-09-23 23:49:06.992] 512+0 records in [2025-09-23 23:49:06.992] 512+0 records out [2025-09-23 23:49:07.023] Starting syslogd/klogd: Waiting data available... [2025-09-23 23:49:07.039] done [2025-09-23 23:49:07.039] DML Start [2025-09-23 23:49:07.183] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:49:07.407] DML res1: 0 [2025-09-23 23:49:07.956] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:49:07.956] Read Success [2025-09-23 23:49:07.956] Verifying certificate... [2025-09-23 23:49:08.197] Verified OK [2025-09-23 23:49:08.213] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:49:09.860] Verified OK [2025-09-23 23:49:09.860] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:49:10.435] Verified OK [2025-09-23 23:49:10.435] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:49:12.930] fs.protected_hardlinks = 1 [2025-09-23 23:49:12.930] fs.protected_symlinks = 1 [2025-09-23 23:49:12.946] kernel.modules_disabled = 1 [2025-09-23 23:49:13.137] [2025-09-23 23:49:13.138] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:49:14.533] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:49:22.338] SBL1:1210.0.1.0 [2025-09-23 23:49:22.386] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:49:23.953] SBL2:1210.0.1.0 [2025-09-23 23:49:23.985] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:49:24.097] j-A [2025-09-23 23:49:31.451] The R5 Autosar Classic is running [2025-09-23 23:49:31.451] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:49:31.472] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:49:32.080] INIT: version 2.96 booting [2025-09-23 23:49:32.191] INIT: Entering runlevel: 5 [2025-09-23 23:49:32.351] mtd28 attached [2025-09-23 23:49:32.351] mtd32 attached [2025-09-23 23:49:32.367] mtd24 attached [2025-09-23 23:49:32.416] ubi0:animations is mounted. [2025-09-23 23:49:32.416] RTNETLINK answers: File exists [2025-09-23 23:49:32.470] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:49:32.470] ubi1:dml_code is mounted. [2025-09-23 23:49:32.470] ubi2:textures is mounted. [2025-09-23 23:49:32.470] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:49:32.470] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:49:32.470] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:49:32.470] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:49:32.470] data.LB_FadeInType0=100 [2025-09-23 23:49:32.470] data.CHLH_FadeInType0=0 [2025-09-23 23:49:32.470] data.WU_FadeInDelay=0 [2025-09-23 23:49:32.470] max_time_out=0 [2025-09-23 23:49:32.470] No splash screen [2025-09-23 23:49:32.470] stop dss Done [2025-09-23 23:49:32.556] /dev/mem opened. [2025-09-23 23:49:32.556] Memory mapped at address 0xffff8bc34000. [2025-09-23 23:49:32.556] Read at address 0x00600018 (0xffff8bc34018): 0x00000000 [2025-09-23 23:49:32.556] Write at address 0x00600018 (0xffff8bc34018): 0x00400040, readback 0x00400040 [2025-09-23 23:49:32.556] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:49:32.572] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:49:32.652] Loaded PowerVR consumer services. [2025-09-23 23:49:32.780] Waiting data available... [2025-09-23 23:49:32.780] 512+0 records in [2025-09-23 23:49:32.780] 512+0 records out [2025-09-23 23:49:32.828] Starting syslogd/klogd: done [2025-09-23 23:49:32.844] DML Start [2025-09-23 23:49:33.036] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:49:33.228] DML res1: 0 [2025-09-23 23:49:33.660] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:49:33.680] Read Success [2025-09-23 23:49:33.680] Verifying certificate... [2025-09-23 23:49:33.905] Verified OK [2025-09-23 23:49:33.920] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:49:35.449] Verified OK [2025-09-23 23:49:35.449] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:49:35.998] Verified OK [2025-09-23 23:49:35.998] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:49:38.779] fs.protected_hardlinks = 1 [2025-09-23 23:49:38.779] fs.protected_symlinks = 1 [2025-09-23 23:49:38.795] kernel.modules_disabled = 1 [2025-09-23 23:49:38.988] [2025-09-23 23:49:38.988] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:49:40.373] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:49:48.115] SBL1:1210.0.1.0 [2025-09-23 23:49:48.147] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:49:49.729] SBL2:1210.0.1.0 [2025-09-23 23:49:49.761] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:49:49.857] j-A [2025-09-23 23:49:57.212] The R5 Autosar Classic is running [2025-09-23 23:49:57.236] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:49:57.236] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:49:57.843] INIT: version 2.96 booting [2025-09-23 23:49:57.955] INIT: Entering runlevel: 5 [2025-09-23 23:49:58.099] mtd24 attached [2025-09-23 23:49:58.115] mtd32 attached [2025-09-23 23:49:58.131] mtd28 attached [2025-09-23 23:49:58.178] RTNETLINK answers: File exists [2025-09-23 23:49:58.243] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:49:58.243] ubi2:animations is mounted. [2025-09-23 23:49:58.243] ubi0:textures is mounted. [2025-09-23 23:49:58.243] ubi1:dml_code is mounted. [2025-09-23 23:49:58.243] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:49:58.243] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:49:58.243] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:49:58.243] data.LB_FadeInType0=100 [2025-09-23 23:49:58.243] data.CHLH_FadeInType0=0 [2025-09-23 23:49:58.243] data.WU_FadeInDelay=0 [2025-09-23 23:49:58.243] max_time_out=0 [2025-09-23 23:49:58.243] No splash screen [2025-09-23 23:49:58.243] stop dss Done [2025-09-23 23:49:58.243] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:49:58.315] /dev/mem opened. [2025-09-23 23:49:58.315] Memory mapped at address 0xffff85ca3000. [2025-09-23 23:49:58.315] Read at address 0x00600018 (0xffff85ca3018): 0x00000000 [2025-09-23 23:49:58.315] Write at address 0x00600018 (0xffff85ca3018): 0x00400040, readback 0x00400040 [2025-09-23 23:49:58.347] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:49:58.363] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:49:58.475] Loaded PowerVR consumer services. [2025-09-23 23:49:58.539] 512+0 records in [2025-09-23 23:49:58.539] 512+0 records out [2025-09-23 23:49:58.571] Waiting data available... [2025-09-23 23:49:58.587] Starting syslogd/klogd: done [2025-09-23 23:49:58.603] DML Start [2025-09-23 23:49:58.762] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:49:58.986] DML res1: 0 [2025-09-23 23:49:59.497] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:49:59.497] Read Success [2025-09-23 23:49:59.497] Verifying certificate... [2025-09-23 23:49:59.721] Verified OK [2025-09-23 23:49:59.737] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:50:01.448] Verified OK [2025-09-23 23:50:01.448] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:50:02.119] Verified OK [2025-09-23 23:50:02.119] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:50:04.740] fs.protected_hardlinks = 1 [2025-09-23 23:50:04.740] fs.protected_symlinks = 1 [2025-09-23 23:50:04.757] kernel.modules_disabled = 1 [2025-09-23 23:50:04.933] [2025-09-23 23:50:04.933] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:50:06.097] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:50:13.886] SBL1:1210.0.1.0 [2025-09-23 23:50:13.918] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:50:15.501] SBL2:1210.0.1.0 [2025-09-23 23:50:15.533] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:50:15.644] j-A [2025-09-23 23:50:22.984] The R5 Autosar Classic is running [2025-09-23 23:50:23.009] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:50:23.009] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:50:23.617] INIT: version 2.96 booting [2025-09-23 23:50:23.729] INIT: Entering runlevel: 5 [2025-09-23 23:50:23.888] mtd24 attached [2025-09-23 23:50:23.888] mtd32 attached [2025-09-23 23:50:23.904] mtd28 attached [2025-09-23 23:50:23.936] ubi0:textures is mounted. [2025-09-23 23:50:23.952] RTNETLINK answers: File exists [2025-09-23 23:50:24.020] ubi1:dml_code is mounted. [2025-09-23 23:50:24.020] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:50:24.020] ubi2:animations is mounted. [2025-09-23 23:50:24.020] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:50:24.020] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:50:24.020] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:50:24.020] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:50:24.020] data.LB_FadeInType0=100 [2025-09-23 23:50:24.020] data.CHLH_FadeInType0=0 [2025-09-23 23:50:24.020] data.WU_FadeInDelay=0 [2025-09-23 23:50:24.020] max_time_out=0 [2025-09-23 23:50:24.020] No splash screen [2025-09-23 23:50:24.020] stop dss Done [2025-09-23 23:50:24.103] /dev/mem opened. [2025-09-23 23:50:24.103] Memory mapped at address 0xffffb6577000. [2025-09-23 23:50:24.103] Read at address 0x00600018 (0xffffb6577018): 0x00000000 [2025-09-23 23:50:24.103] Write at address 0x00600018 (0xffffb6577018): 0x00400040, readback 0x00400040 [2025-09-23 23:50:24.103] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:50:24.103] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:50:24.200] Loaded PowerVR consumer services. [2025-09-23 23:50:24.311] 512+0 records in [2025-09-23 23:50:24.311] 512+0 records out [2025-09-23 23:50:24.343] Starting syslogd/klogd: done [2025-09-23 23:50:24.359] Waiting data available... [2025-09-23 23:50:24.359] DML Start [2025-09-23 23:50:24.536] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:50:24.759] DML res1: 0 [2025-09-23 23:50:25.190] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:50:25.206] Read Success [2025-09-23 23:50:25.207] Verifying certificate... [2025-09-23 23:50:25.446] Verified OK [2025-09-23 23:50:25.462] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:50:27.245] Verified OK [2025-09-23 23:50:27.245] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:50:27.834] Verified OK [2025-09-23 23:50:27.834] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:50:30.488] fs.protected_hardlinks = 1 [2025-09-23 23:50:30.504] fs.protected_symlinks = 1 [2025-09-23 23:50:30.504] kernel.modules_disabled = 1 [2025-09-23 23:50:30.711] [2025-09-23 23:50:30.711] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:50:31.850] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:50:39.640] SBL1:1210.0.1.0 [2025-09-23 23:50:39.688] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:50:41.255] SBL2:1210.0.1.0 [2025-09-23 23:50:41.287] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:50:41.399] j-A [2025-09-23 23:50:48.772] The R5 Autosar Classic is running [2025-09-23 23:50:48.772] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:50:48.772] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:50:49.380] INIT: version 2.96 booting [2025-09-23 23:50:49.491] INIT: Entering runlevel: 5 [2025-09-23 23:50:49.635] mtd28 attached [2025-09-23 23:50:49.651] mtd24 attached [2025-09-23 23:50:49.667] mtd32 attached [2025-09-23 23:50:49.766] ubi0:animations is mounted. [2025-09-23 23:50:49.766] RTNETLINK answers: File exists [2025-09-23 23:50:49.766] ubi1:textures is mounted. [2025-09-23 23:50:49.766] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:50:49.766] ubi2:dml_code is mounted. [2025-09-23 23:50:49.766] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:50:49.766] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:50:49.766] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:50:49.766] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:50:49.766] data.LB_FadeInType0=100 [2025-09-23 23:50:49.766] data.CHLH_FadeInType0=0 [2025-09-23 23:50:49.766] data.WU_FadeInDelay=0 [2025-09-23 23:50:49.766] max_time_out=0 [2025-09-23 23:50:49.766] No splash screen [2025-09-23 23:50:49.766] stop dss Done [2025-09-23 23:50:49.814] /dev/mem opened. [2025-09-23 23:50:49.840] Memory mapped at address 0xffffa55f7000. [2025-09-23 23:50:49.840] Read at address 0x00600018 (0xffffa55f7018): 0x00000000 [2025-09-23 23:50:49.840] Write at address 0x00600018 (0xffffa55f7018): 0x00400040, readback 0x00400040 [2025-09-23 23:50:49.872] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:50:49.872] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:50:50.031] Loaded PowerVR consumer services. [2025-09-23 23:50:50.088] Waiting data available... [2025-09-23 23:50:50.088] 512+0 records in [2025-09-23 23:50:50.088] 512+0 records out [2025-09-23 23:50:50.120] Starting syslogd/klogd: done [2025-09-23 23:50:50.136] DML Start [2025-09-23 23:50:50.328] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:50:50.568] DML res1: 0 [2025-09-23 23:50:50.965] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:50:50.965] Read Success [2025-09-23 23:50:50.965] Verifying certificate... [2025-09-23 23:50:51.220] Verified OK [2025-09-23 23:50:51.236] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:50:53.011] Verified OK [2025-09-23 23:50:53.032] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:50:53.591] Verified OK [2025-09-23 23:50:53.591] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:50:56.182] fs.protected_hardlinks = 1 [2025-09-23 23:50:56.198] fs.protected_symlinks = 1 [2025-09-23 23:50:56.214] kernel.modules_disabled = 1 [2025-09-23 23:50:56.405] [2025-09-23 23:50:56.405] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:50:57.641] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:51:05.394] SBL1:1210.0.1.0 [2025-09-23 23:51:05.442] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:51:07.008] SBL2:1210.0.1.0 [2025-09-23 23:51:07.056] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:51:07.153] j-A [2025-09-23 23:51:14.508] The R5 Autosar Classic is running [2025-09-23 23:51:14.508] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:51:14.529] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:51:15.137] INIT: version 2.96 booting [2025-09-23 23:51:15.249] INIT: Entering runlevel: 5 [2025-09-23 23:51:15.393] mtd24 attached [2025-09-23 23:51:15.409] mtd28 attached [2025-09-23 23:51:15.441] mtd32 attached [2025-09-23 23:51:15.457] ubi0:textures is mounted. [2025-09-23 23:51:15.472] ubi1:animations is mounted. [2025-09-23 23:51:15.534] RTNETLINK answers: File exists [2025-09-23 23:51:15.534] ubi2:dml_code is mounted. [2025-09-23 23:51:15.534] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:51:15.534] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:51:15.534] data.LB_FadeInType0=100 [2025-09-23 23:51:15.534] data.CHLH_FadeInType0=0 [2025-09-23 23:51:15.534] data.WU_FadeInDelay=0 [2025-09-23 23:51:15.534] max_time_out=0 [2025-09-23 23:51:15.534] No splash screen [2025-09-23 23:51:15.534] stop dss Done [2025-09-23 23:51:15.534] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:51:15.534] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:51:15.534] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:51:15.616] /dev/mem opened. [2025-09-23 23:51:15.616] Memory mapped at address 0xffffa4979000. [2025-09-23 23:51:15.616] Read at address 0x00600018 (0xffffa4979018): 0x00000000 [2025-09-23 23:51:15.616] Write at address 0x00600018 (0xffffa4979018): 0x00400040, readback 0x00400040 [2025-09-23 23:51:15.616] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:51:15.632] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:51:15.791] Loaded PowerVR consumer services. [2025-09-23 23:51:15.839] Waiting data available... [2025-09-23 23:51:15.855] 512+0 records in [2025-09-23 23:51:15.855] 512+0 records out [2025-09-23 23:51:15.887] Starting syslogd/klogd: done [2025-09-23 23:51:15.920] DML Start [2025-09-23 23:51:16.095] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:51:16.319] DML res1: 0 [2025-09-23 23:51:16.783] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:51:16.804] Read Success [2025-09-23 23:51:16.804] Verifying certificate... [2025-09-23 23:51:17.092] Verified OK [2025-09-23 23:51:17.108] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:51:18.922] Verified OK [2025-09-23 23:51:18.922] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:51:19.464] Verified OK [2025-09-23 23:51:19.464] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:51:21.878] fs.protected_hardlinks = 1 [2025-09-23 23:51:21.878] fs.protected_symlinks = 1 [2025-09-23 23:51:21.894] kernel.modules_disabled = 1 [2025-09-23 23:51:22.071] [2025-09-23 23:51:22.071] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:51:23.429] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:51:31.161] SBL1:1210.0.1.0 [2025-09-23 23:51:31.209] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:51:32.776] SBL2:1210.0.1.0 [2025-09-23 23:51:32.807] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:51:32.919] j-A [2025-09-23 23:51:40.296] The R5 Autosar Classic is running [2025-09-23 23:51:40.296] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:51:40.296] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:51:40.904] INIT: version 2.96 booting [2025-09-23 23:51:41.016] INIT: Entering runlevel: 5 [2025-09-23 23:51:41.160] mtd24 attached [2025-09-23 23:51:41.176] mtd32 attached [2025-09-23 23:51:41.192] mtd28 attached [2025-09-23 23:51:41.224] ubi0:textures is mounted. [2025-09-23 23:51:41.240] RTNETLINK answers: File exists [2025-09-23 23:51:41.292] ubi2:animations is mounted. [2025-09-23 23:51:41.292] ubi1:dml_code is mounted. [2025-09-23 23:51:41.292] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:51:41.292] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:51:41.292] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:51:41.292] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:51:41.292] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:51:41.292] data.LB_FadeInType0=100 [2025-09-23 23:51:41.292] data.CHLH_FadeInType0=0 [2025-09-23 23:51:41.292] data.WU_FadeInDelay=0 [2025-09-23 23:51:41.292] max_time_out=0 [2025-09-23 23:51:41.292] No splash screen [2025-09-23 23:51:41.292] stop dss Done [2025-09-23 23:51:41.324] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:51:41.364] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:51:41.364] /dev/mem opened. [2025-09-23 23:51:41.364] Memory mapped at address 0xffff94bb3000. [2025-09-23 23:51:41.364] Read at address 0x00600018 (0xffff94bb3018): 0x00000000 [2025-09-23 23:51:41.364] Write at address 0x00600018 (0xffff94bb3018): 0x00400040, readback 0x00400040 [2025-09-23 23:51:41.540] Loaded PowerVR consumer services. [2025-09-23 23:51:41.572] 512+0 records in [2025-09-23 23:51:41.572] 512+0 records out [2025-09-23 23:51:41.620] Waiting data available... [2025-09-23 23:51:41.636] Starting syslogd/klogd: done [2025-09-23 23:51:41.652] DML Start [2025-09-23 23:51:41.843] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:51:42.083] DML res1: 0 [2025-09-23 23:51:42.492] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:51:42.492] Read Success [2025-09-23 23:51:42.492] Verifying certificate... [2025-09-23 23:51:42.748] Verified OK [2025-09-23 23:51:42.764] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:51:44.432] Verified OK [2025-09-23 23:51:44.432] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:51:45.016] Verified OK [2025-09-23 23:51:45.016] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:51:47.638] fs.protected_hardlinks = 1 [2025-09-23 23:51:47.654] fs.protected_symlinks = 1 [2025-09-23 23:51:47.670] kernel.modules_disabled = 1 [2025-09-23 23:51:47.862] [2025-09-23 23:51:47.862] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:51:49.169] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:51:56.922] SBL1:1210.0.1.0 [2025-09-23 23:51:56.969] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:51:58.536] SBL2:1210.0.1.0 [2025-09-23 23:51:58.568] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:51:58.680] j-A [2025-09-23 23:52:06.053] The R5 Autosar Classic is running [2025-09-23 23:52:06.053] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:52:06.053] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:52:06.661] INIT: version 2.96 booting [2025-09-23 23:52:06.772] INIT: Entering runlevel: 5 [2025-09-23 23:52:06.916] mtd24 attached [2025-09-23 23:52:06.932] mtd28 attached [2025-09-23 23:52:06.948] mtd32 attached [2025-09-23 23:52:06.980] RTNETLINK answers: File exists [2025-09-23 23:52:07.029] ubi0:textures is mounted. [2025-09-23 23:52:07.029] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:52:07.029] ubi1:animations is mounted. [2025-09-23 23:52:07.029] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:52:07.029] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:52:07.029] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:52:07.029] ubi2:dml_code is mounted. [2025-09-23 23:52:07.029] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:52:07.057] data.LB_FadeInType0=100 [2025-09-23 23:52:07.057] data.CHLH_FadeInType0=0 [2025-09-23 23:52:07.057] data.WU_FadeInDelay=0 [2025-09-23 23:52:07.057] max_time_out=0 [2025-09-23 23:52:07.057] No splash screen [2025-09-23 23:52:07.057] stop dss Done [2025-09-23 23:52:07.086] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:52:07.086] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:52:07.124] /dev/mem opened. [2025-09-23 23:52:07.124] Memory mapped at address 0xffff94fb7000. [2025-09-23 23:52:07.124] Read at address 0x00600018 (0xffff94fb7018): 0x00000000 [2025-09-23 23:52:07.124] Write at address 0x00600018 (0xffff94fb7018): 0x00400040, readback 0x00400040 [2025-09-23 23:52:07.204] Loaded PowerVR consumer services. [2025-09-23 23:52:07.348] 512+0 records in [2025-09-23 23:52:07.348] 512+0 records out [2025-09-23 23:52:07.364] Waiting data available... [2025-09-23 23:52:07.380] Starting syslogd/klogd: done [2025-09-23 23:52:07.396] DML Start [2025-09-23 23:52:07.604] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:52:07.828] DML res1: 0 [2025-09-23 23:52:08.273] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:52:08.273] Read Success [2025-09-23 23:52:08.273] Verifying certificate... [2025-09-23 23:52:08.513] Verified OK [2025-09-23 23:52:08.529] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:52:10.141] Verified OK [2025-09-23 23:52:10.141] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:52:10.765] Verified OK [2025-09-23 23:52:10.765] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:52:13.500] fs.protected_hardlinks = 1 [2025-09-23 23:52:13.500] fs.protected_symlinks = 1 [2025-09-23 23:52:13.515] kernel.modules_disabled = 1 [2025-09-23 23:52:13.707] [2025-09-23 23:52:13.707] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:52:14.933] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:52:22.679] SBL1:1210.0.1.0 [2025-09-23 23:52:22.726] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:52:24.294] SBL2:1210.0.1.0 [2025-09-23 23:52:24.325] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:52:24.437] j-A [2025-09-23 23:52:31.792] The R5 Autosar Classic is running [2025-09-23 23:52:31.792] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:52:31.813] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:52:32.420] INIT: version 2.96 booting [2025-09-23 23:52:32.532] INIT: Entering runlevel: 5 [2025-09-23 23:52:32.708] mtd32 attached [2025-09-23 23:52:32.708] mtd28 attached [2025-09-23 23:52:32.724] mtd24 attached [2025-09-23 23:52:32.756] ubi0:dml_code is mounted. [2025-09-23 23:52:32.772] RTNETLINK answers: File exists [2025-09-23 23:52:32.809] ubi2:textures is mounted. [2025-09-23 23:52:32.809] ubi1:animations is mounted. [2025-09-23 23:52:32.809] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:52:32.809] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:52:32.809] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:52:32.809] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:52:32.809] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:52:32.831] data.LB_FadeInType0=100 [2025-09-23 23:52:32.831] data.CHLH_FadeInType0=0 [2025-09-23 23:52:32.831] data.WU_FadeInDelay=0 [2025-09-23 23:52:32.831] max_time_out=0 [2025-09-23 23:52:32.831] No splash screen [2025-09-23 23:52:32.831] stop dss Done [2025-09-23 23:52:32.847] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:52:32.863] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:52:32.915] /dev/mem opened. [2025-09-23 23:52:32.915] Memory mapped at address 0xffff9c8dc000. [2025-09-23 23:52:32.915] Read at address 0x00600018 (0xffff9c8dc018): 0x00000000 [2025-09-23 23:52:32.915] Write at address 0x00600018 (0xffff9c8dc018): 0x00400040, readback 0x00400040 [2025-09-23 23:52:33.011] Loaded PowerVR consumer services. [2025-09-23 23:52:33.161] 512+0 records in [2025-09-23 23:52:33.161] 512+0 records out [2025-09-23 23:52:33.161] Waiting data available... [2025-09-23 23:52:33.193] Starting syslogd/klogd: done [2025-09-23 23:52:33.209] DML Start [2025-09-23 23:52:33.385] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:52:33.641] DML res1: 0 [2025-09-23 23:52:34.021] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:52:34.021] Read Success [2025-09-23 23:52:34.021] Verifying certificate... [2025-09-23 23:52:34.292] Verified OK [2025-09-23 23:52:34.324] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:52:35.988] Verified OK [2025-09-23 23:52:35.988] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:52:36.624] Verified OK [2025-09-23 23:52:36.624] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:52:39.231] fs.protected_hardlinks = 1 [2025-09-23 23:52:39.231] fs.protected_symlinks = 1 [2025-09-23 23:52:39.246] kernel.modules_disabled = 1 [2025-09-23 23:52:39.438] [2025-09-23 23:52:39.438] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:52:40.726] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:52:48.462] SBL1:1210.0.1.0 [2025-09-23 23:52:48.510] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:52:50.076] SBL2:1210.0.1.0 [2025-09-23 23:52:50.108] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:52:50.220] j-A [2025-09-23 23:52:57.594] The R5 Autosar Classic is running [2025-09-23 23:52:57.594] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:52:57.594] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:52:58.202] INIT: version 2.96 booting [2025-09-23 23:52:58.313] INIT: Entering runlevel: 5 [2025-09-23 23:52:58.474] mtd28 attached [2025-09-23 23:52:58.474] mtd24 attached [2025-09-23 23:52:58.490] mtd32 attached [2025-09-23 23:52:58.538] ubi1:textures is mounted. [2025-09-23 23:52:58.538] ubi0:animations is mounted. [2025-09-23 23:52:58.601] RTNETLINK answers: File exists [2025-09-23 23:52:58.601] ubi2:dml_code is mounted. [2025-09-23 23:52:58.601] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:52:58.601] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:52:58.601] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:52:58.601] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:52:58.601] data.LB_FadeInType0=100 [2025-09-23 23:52:58.601] data.CHLH_FadeInType0=0 [2025-09-23 23:52:58.601] data.WU_FadeInDelay=0 [2025-09-23 23:52:58.601] max_time_out=0 [2025-09-23 23:52:58.601] No splash screen [2025-09-23 23:52:58.601] stop dss Done [2025-09-23 23:52:58.601] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:52:58.679] /dev/mem opened. [2025-09-23 23:52:58.679] Memory mapped at address 0xffff811d7000. [2025-09-23 23:52:58.679] Read at address 0x00600018 (0xffff811d7018): 0x00000000 [2025-09-23 23:52:58.679] Write at address 0x00600018 (0xffff811d7018): 0x00400040, readback 0x00400040 [2025-09-23 23:52:58.679] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:52:58.679] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:52:58.743] Loaded PowerVR consumer services. [2025-09-23 23:52:58.916] 512+0 records in [2025-09-23 23:52:58.916] 512+0 records out [2025-09-23 23:52:58.916] Waiting data available... [2025-09-23 23:52:58.932] Starting syslogd/klogd: done [2025-09-23 23:52:58.948] DML Start [2025-09-23 23:52:59.140] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:52:59.364] DML res1: 0 [2025-09-23 23:52:59.772] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:52:59.772] Read Success [2025-09-23 23:52:59.772] Verifying certificate... [2025-09-23 23:52:59.996] Verified OK [2025-09-23 23:53:00.028] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:53:01.595] Verified OK [2025-09-23 23:53:01.595] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:53:02.228] Verified OK [2025-09-23 23:53:02.228] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:53:05.011] fs.protected_hardlinks = 1 [2025-09-23 23:53:05.011] fs.protected_symlinks = 1 [2025-09-23 23:53:05.027] kernel.modules_disabled = 1 [2025-09-23 23:53:05.235] [2025-09-23 23:53:05.235] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:53:06.443] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:53:14.279] SBL1:1210.0.1.0 [2025-09-23 23:53:14.311] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:53:15.893] SBL2:1210.0.1.0 [2025-09-23 23:53:15.925] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:53:16.021] j-A [2025-09-23 23:53:23.375] The R5 Autosar Classic is running [2025-09-23 23:53:23.400] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:53:23.400] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:53:24.008] INIT: version 2.96 booting [2025-09-23 23:53:24.136] INIT: Entering runlevel: 5 [2025-09-23 23:53:24.279] mtd24 attached [2025-09-23 23:53:24.295] mtd28 attached [2025-09-23 23:53:24.295] mtd32 attached [2025-09-23 23:53:24.327] ubi0:textures is mounted. [2025-09-23 23:53:24.360] RTNETLINK answers: File exists [2025-09-23 23:53:24.360] ubi1:animations is mounted. [2025-09-23 23:53:24.415] ubi2:dml_code is mounted. [2025-09-23 23:53:24.415] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:53:24.415] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:53:24.415] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:53:24.415] data.LB_FadeInType0=100 [2025-09-23 23:53:24.415] data.CHLH_FadeInType0=0 [2025-09-23 23:53:24.415] data.WU_FadeInDelay=0 [2025-09-23 23:53:24.415] max_time_out=0 [2025-09-23 23:53:24.415] No splash screen [2025-09-23 23:53:24.415] stop dss Done [2025-09-23 23:53:24.415] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:53:24.415] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:53:24.447] /dev/mem opened. [2025-09-23 23:53:24.447] Memory mapped at address 0xffff928b2000. [2025-09-23 23:53:24.473] Read at address 0x00600018 (0xffff928b2018): 0x00000000 [2025-09-23 23:53:24.473] Write at address 0x00600018 (0xffff928b2018): 0x00400040, readback 0x00400040 [2025-09-23 23:53:24.515] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:53:24.515] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:53:24.580] Loaded PowerVR consumer services. [2025-09-23 23:53:24.707] 512+0 records in [2025-09-23 23:53:24.707] 512+0 records out [2025-09-23 23:53:24.723] Waiting data available... [2025-09-23 23:53:24.755] Starting syslogd/klogd: done [2025-09-23 23:53:24.771] DML Start [2025-09-23 23:53:24.947] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:53:25.203] DML res1: 0 [2025-09-23 23:53:25.646] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:53:25.646] Read Success [2025-09-23 23:53:25.646] Verifying certificate... [2025-09-23 23:53:25.885] Verified OK [2025-09-23 23:53:25.901] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:53:27.493] Verified OK [2025-09-23 23:53:27.493] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:53:28.093] Verified OK [2025-09-23 23:53:28.093] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:53:30.716] fs.protected_hardlinks = 1 [2025-09-23 23:53:30.716] fs.protected_symlinks = 1 [2025-09-23 23:53:30.731] kernel.modules_disabled = 1 [2025-09-23 23:53:30.908] [2025-09-23 23:53:30.908] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:53:32.304] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:53:40.057] SBL1:1210.0.1.0 [2025-09-23 23:53:40.089] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:53:41.671] SBL2:1210.0.1.0 [2025-09-23 23:53:41.703] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 23:53:41.799] j-A [2025-09-23 23:53:49.154] The R5 Autosar Classic is running [2025-09-23 23:53:49.179] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:53:49.179] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:53:49.786] INIT: version 2.96 booting [2025-09-23 23:53:49.898] INIT: Entering runlevel: 5 [2025-09-23 23:53:50.057] mtd32 attached [2025-09-23 23:53:50.073] mtd24 attached [2025-09-23 23:53:50.073] mtd28 attached [2025-09-23 23:53:50.105] ubi0:dml_code is mounted. [2025-09-23 23:53:50.123] ubi1:textures is mounted. [2025-09-23 23:53:50.165] RTNETLINK answers: File exists [2025-09-23 23:53:50.165] ubi2:animations is mounted. [2025-09-23 23:53:50.165] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:53:50.165] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:53:50.165] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:53:50.165] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:53:50.165] data.LB_FadeInType0=100 [2025-09-23 23:53:50.191] data.CHLH_FadeInType0=0 [2025-09-23 23:53:50.191] data.WU_FadeInDelay=0 [2025-09-23 23:53:50.191] max_time_out=0 [2025-09-23 23:53:50.191] No splash screen [2025-09-23 23:53:50.191] stop dss Done [2025-09-23 23:53:50.191] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:53:50.260] /dev/mem opened. [2025-09-23 23:53:50.260] Memory mapped at address 0xffff85f39000. [2025-09-23 23:53:50.260] Read at address 0x00600018 (0xffff85f39018): 0x00000000 [2025-09-23 23:53:50.260] Write at address 0x00600018 (0xffff85f39018): 0x00400040, readback 0x00400040 [2025-09-23 23:53:50.260] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:53:50.278] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:53:50.419] Loaded PowerVR consumer services. [2025-09-23 23:53:50.499] 512+0 records in [2025-09-23 23:53:50.499] 512+0 records out [2025-09-23 23:53:50.531] Waiting data available... [2025-09-23 23:53:50.547] Starting syslogd/klogd: done [2025-09-23 23:53:50.563] DML Start [2025-09-23 23:53:50.739] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:53:50.979] DML res1: 0 [2025-09-23 23:53:51.424] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:53:51.424] Read Success [2025-09-23 23:53:51.424] Verifying certificate... [2025-09-23 23:53:51.663] Verified OK [2025-09-23 23:53:51.679] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:53:53.465] Verified OK [2025-09-23 23:53:53.465] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:53:53.993] Verified OK [2025-09-23 23:53:53.993] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:53:56.503] fs.protected_hardlinks = 1 [2025-09-23 23:53:56.503] fs.protected_symlinks = 1 [2025-09-23 23:53:56.519] kernel.modules_disabled = 1 [2025-09-23 23:53:56.695] [2025-09-23 23:53:56.695] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:53:58.083] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:54:05.840] SBL1:1210.0.1.0 [2025-09-23 23:54:05.888] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:54:07.453] SBL2:1210.0.1.0 [2025-09-23 23:54:07.501] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:54:07.598] j-A [2025-09-23 23:54:14.952] The R5 Autosar Classic is running [2025-09-23 23:54:14.952] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:54:14.973] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:54:15.581] INIT: version 2.96 booting [2025-09-23 23:54:15.692] INIT: Entering runlevel: 5 [2025-09-23 23:54:15.853] mtd32 attached [2025-09-23 23:54:15.853] mtd28 attached [2025-09-23 23:54:15.869] mtd24 attached [2025-09-23 23:54:15.917] RTNETLINK answers: File exists [2025-09-23 23:54:15.917] ubi0:dml_code is mounted. [2025-09-23 23:54:15.981] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:54:15.981] ubi2:textures is mounted. [2025-09-23 23:54:15.981] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:54:15.981] ubi1:animations is mounted. [2025-09-23 23:54:15.981] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:54:15.981] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:54:15.981] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:54:15.981] data.LB_FadeInType0=100 [2025-09-23 23:54:15.981] data.CHLH_FadeInType0=0 [2025-09-23 23:54:15.981] data.WU_FadeInDelay=0 [2025-09-23 23:54:15.981] max_time_out=0 [2025-09-23 23:54:15.981] No splash screen [2025-09-23 23:54:15.981] stop dss Done [2025-09-23 23:54:16.063] /dev/mem opened. [2025-09-23 23:54:16.063] Memory mapped at address 0xffff99a13000. [2025-09-23 23:54:16.063] Read at address 0x00600018 (0xffff99a13018): 0x00000000 [2025-09-23 23:54:16.063] Write at address 0x00600018 (0xffff99a13018): 0x00400040, readback 0x00400040 [2025-09-23 23:54:16.063] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:54:16.063] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:54:16.239] Loaded PowerVR consumer services. [2025-09-23 23:54:16.271] 512+0 records in [2025-09-23 23:54:16.271] 512+0 records out [2025-09-23 23:54:16.319] Starting syslogd/klogd: done [2025-09-23 23:54:16.351] Waiting data available... [2025-09-23 23:54:16.351] DML Start [2025-09-23 23:54:16.543] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:54:16.767] DML res1: 0 [2025-09-23 23:54:17.244] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:54:17.244] Read Success [2025-09-23 23:54:17.244] Verifying certificate... [2025-09-23 23:54:17.467] Verified OK [2025-09-23 23:54:17.500] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:54:19.226] Verified OK [2025-09-23 23:54:19.247] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:54:19.835] Verified OK [2025-09-23 23:54:19.835] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:54:22.410] fs.protected_hardlinks = 1 [2025-09-23 23:54:22.410] fs.protected_symlinks = 1 [2025-09-23 23:54:22.426] kernel.modules_disabled = 1 [2025-09-23 23:54:22.618] [2025-09-23 23:54:22.618] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:54:23.838] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:54:31.599] SBL1:1210.0.1.0 [2025-09-23 23:54:31.647] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:54:33.213] SBL2:1210.0.1.0 [2025-09-23 23:54:33.246] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:54:33.358] j-A [2025-09-23 23:54:40.731] The R5 Autosar Classic is running [2025-09-23 23:54:40.731] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:54:40.731] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:54:41.339] INIT: version 2.96 booting [2025-09-23 23:54:41.450] INIT: Entering runlevel: 5 [2025-09-23 23:54:41.610] mtd32 attached [2025-09-23 23:54:41.610] mtd28 attached [2025-09-23 23:54:41.626] mtd24 attached [2025-09-23 23:54:41.674] RTNETLINK answers: File exists [2025-09-23 23:54:41.739] ubi0:dml_code is mounted. [2025-09-23 23:54:41.739] ubi1:animations is mounted. [2025-09-23 23:54:41.739] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:54:41.739] ubi2:textures is mounted. [2025-09-23 23:54:41.739] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:54:41.739] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:54:41.739] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:54:41.739] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:54:41.739] data.LB_FadeInType0=100 [2025-09-23 23:54:41.739] data.CHLH_FadeInType0=0 [2025-09-23 23:54:41.739] data.WU_FadeInDelay=0 [2025-09-23 23:54:41.739] max_time_out=0 [2025-09-23 23:54:41.739] No splash screen [2025-09-23 23:54:41.739] stop dss Done [2025-09-23 23:54:41.787] /dev/mem opened. [2025-09-23 23:54:41.787] Memory mapped at address 0xffff952e9000. [2025-09-23 23:54:41.813] Read at address 0x00600018 (0xffff952e9018): 0x00000000 [2025-09-23 23:54:41.813] Write at address 0x00600018 (0xffff952e9018): 0x00400040, readback 0x00400040 [2025-09-23 23:54:41.829] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:54:41.845] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:54:41.957] Loaded PowerVR consumer services. [2025-09-23 23:54:42.052] 512+0 records in [2025-09-23 23:54:42.068] 512+0 records out [2025-09-23 23:54:42.068] Waiting data available... [2025-09-23 23:54:42.084] Starting syslogd/klogd: done [2025-09-23 23:54:42.100] DML Start [2025-09-23 23:54:42.292] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:54:42.532] DML res1: 0 [2025-09-23 23:54:42.940] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:54:42.940] Read Success [2025-09-23 23:54:42.940] Verifying certificate... [2025-09-23 23:54:43.181] Verified OK [2025-09-23 23:54:43.197] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:54:44.807] Verified OK [2025-09-23 23:54:44.807] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:54:45.459] Verified OK [2025-09-23 23:54:45.459] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:54:48.177] fs.protected_hardlinks = 1 [2025-09-23 23:54:48.177] fs.protected_symlinks = 1 [2025-09-23 23:54:48.193] kernel.modules_disabled = 1 [2025-09-23 23:54:48.385] [2025-09-23 23:54:48.385] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:54:49.629] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:54:57.371] SBL1:1210.0.1.0 [2025-09-23 23:54:57.403] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:54:58.986] SBL2:1210.0.1.0 [2025-09-23 23:54:59.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:54:59.129] j-A [2025-09-23 23:55:06.469] The R5 Autosar Classic is running [2025-09-23 23:55:06.500] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:55:06.500] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:55:07.107] INIT: version 2.96 booting [2025-09-23 23:55:07.203] INIT: Entering runlevel: 5 [2025-09-23 23:55:07.363] mtd32 attached [2025-09-23 23:55:07.379] mtd24 attached [2025-09-23 23:55:07.395] mtd28 attached [2025-09-23 23:55:07.427] RTNETLINK answers: File exists [2025-09-23 23:55:07.482] ubi0:dml_code is mounted. [2025-09-23 23:55:07.482] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:55:07.482] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:55:07.482] ubi2:animations is mounted. [2025-09-23 23:55:07.482] ubi1:textures is mounted. [2025-09-23 23:55:07.482] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:55:07.482] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:55:07.482] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:55:07.482] data.LB_FadeInType0=100 [2025-09-23 23:55:07.502] data.CHLH_FadeInType0=0 [2025-09-23 23:55:07.502] data.WU_FadeInDelay=0 [2025-09-23 23:55:07.502] max_time_out=0 [2025-09-23 23:55:07.502] No splash screen [2025-09-23 23:55:07.502] stop dss Done [2025-09-23 23:55:07.534] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:55:07.575] /dev/mem opened. [2025-09-23 23:55:07.575] Memory mapped at address 0xffff86cb3000. [2025-09-23 23:55:07.575] Read at address 0x00600018 (0xffff86cb3018): 0x00000000 [2025-09-23 23:55:07.575] Write at address 0x00600018 (0xffff86cb3018): 0x00400040, readback 0x00400040 [2025-09-23 23:55:07.575] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:55:07.719] Loaded PowerVR consumer services. [2025-09-23 23:55:07.826] Waiting data available... [2025-09-23 23:55:07.826] 512+0 records in [2025-09-23 23:55:07.826] 512+0 records out [2025-09-23 23:55:07.857] Starting syslogd/klogd: done [2025-09-23 23:55:07.874] DML Start [2025-09-23 23:55:08.066] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:55:08.289] DML res1: 0 [2025-09-23 23:55:08.767] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:55:08.767] Read Success [2025-09-23 23:55:08.767] Verifying certificate... [2025-09-23 23:55:08.975] Verified OK [2025-09-23 23:55:08.991] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:55:10.615] Verified OK [2025-09-23 23:55:10.615] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:55:11.232] Verified OK [2025-09-23 23:55:11.232] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:55:13.790] fs.protected_hardlinks = 1 [2025-09-23 23:55:13.806] fs.protected_symlinks = 1 [2025-09-23 23:55:13.806] kernel.modules_disabled = 1 [2025-09-23 23:55:14.014] [2025-09-23 23:55:14.014] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:55:15.349] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:55:23.167] SBL1:1210.0.1.0 [2025-09-23 23:55:23.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:55:24.781] SBL2:1210.0.1.0 [2025-09-23 23:55:24.813] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:55:24.909] j-A [2025-09-23 23:55:32.266] The R5 Autosar Classic is running [2025-09-23 23:55:32.289] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:55:32.289] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:55:32.897] INIT: version 2.96 booting [2025-09-23 23:55:33.008] INIT: Entering runlevel: 5 [2025-09-23 23:55:33.152] mtd24 attached [2025-09-23 23:55:33.168] mtd28 attached [2025-09-23 23:55:33.184] mtd32 attached [2025-09-23 23:55:33.232] ubi2:dml_code is mounted. [2025-09-23 23:55:33.232] RTNETLINK answers: File exists [2025-09-23 23:55:33.293] ubi0:textures is mounted. [2025-09-23 23:55:33.293] ubi1:animations is mounted. [2025-09-23 23:55:33.293] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:55:33.293] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:55:33.293] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:55:33.293] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:55:33.293] data.LB_FadeInType0=100 [2025-09-23 23:55:33.293] data.CHLH_FadeInType0=0 [2025-09-23 23:55:33.293] data.WU_FadeInDelay=0 [2025-09-23 23:55:33.293] max_time_out=0 [2025-09-23 23:55:33.293] No splash screen [2025-09-23 23:55:33.293] stop dss Done [2025-09-23 23:55:33.293] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:55:33.373] /dev/mem opened. [2025-09-23 23:55:33.373] Memory mapped at address 0xffffb6564000. [2025-09-23 23:55:33.373] Read at address 0x00600018 (0xffffb6564018): 0x00000000 [2025-09-23 23:55:33.373] Write at address 0x00600018 (0xffffb6564018): 0x00400040, readback 0x00400040 [2025-09-23 23:55:33.373] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:55:33.373] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:55:33.548] Loaded PowerVR consumer services. [2025-09-23 23:55:33.624] 512+0 records in [2025-09-23 23:55:33.624] 512+0 records out [2025-09-23 23:55:33.624] Waiting data available... [2025-09-23 23:55:33.657] Starting syslogd/klogd: done [2025-09-23 23:55:33.673] DML Start [2025-09-23 23:55:33.865] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:55:34.120] DML res1: 0 [2025-09-23 23:55:34.471] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:55:34.471] Read Success [2025-09-23 23:55:34.471] Verifying certificate... [2025-09-23 23:55:34.711] Verified OK [2025-09-23 23:55:34.727] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:55:36.358] Verified OK [2025-09-23 23:55:36.358] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:55:37.029] Verified OK [2025-09-23 23:55:37.029] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:55:39.715] fs.protected_hardlinks = 1 [2025-09-23 23:55:39.731] fs.protected_symlinks = 1 [2025-09-23 23:55:39.731] kernel.modules_disabled = 1 [2025-09-23 23:55:39.939] [2025-09-23 23:55:39.939] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:55:41.204] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:55:48.932] SBL1:1210.0.1.0 [2025-09-23 23:55:48.964] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:55:50.546] SBL2:1210.0.1.0 [2025-09-23 23:55:50.578] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-23 23:55:50.690] j-A [2025-09-23 23:55:58.030] The R5 Autosar Classic is running [2025-09-23 23:55:58.055] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:55:58.055] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:55:58.663] INIT: version 2.96 booting [2025-09-23 23:55:58.774] INIT: Entering runlevel: 5 [2025-09-23 23:55:58.935] mtd24 attached [2025-09-23 23:55:58.935] mtd28 attached [2025-09-23 23:55:58.967] mtd32 attached [2025-09-23 23:55:58.983] ubi0:textures is mounted. [2025-09-23 23:55:58.999] RTNETLINK answers: File exists [2025-09-23 23:55:58.999] ubi1:animations is mounted. [2025-09-23 23:55:59.055] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:55:59.055] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:55:59.055] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:55:59.055] ubi2:dml_code is mounted. [2025-09-23 23:55:59.055] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:55:59.055] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:55:59.055] data.LB_FadeInType0=100 [2025-09-23 23:55:59.055] data.CHLH_FadeInType0=0 [2025-09-23 23:55:59.055] data.WU_FadeInDelay=0 [2025-09-23 23:55:59.055] max_time_out=0 [2025-09-23 23:55:59.055] No splash screen [2025-09-23 23:55:59.055] stop dss Done [2025-09-23 23:55:59.148] /dev/mem opened. [2025-09-23 23:55:59.148] Memory mapped at address 0xffff9e6b3000. [2025-09-23 23:55:59.148] Read at address 0x00600018 (0xffff9e6b3018): 0x00000000 [2025-09-23 23:55:59.148] Write at address 0x00600018 (0xffff9e6b3018): 0x00400040, readback 0x00400040 [2025-09-23 23:55:59.148] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:55:59.148] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:55:59.356] Loaded PowerVR consumer services. [2025-09-23 23:55:59.398] Waiting data available... [2025-09-23 23:55:59.398] 512+0 records in [2025-09-23 23:55:59.398] 512+0 records out [2025-09-23 23:55:59.446] Starting syslogd/klogd: done [2025-09-23 23:55:59.462] DML Start [2025-09-23 23:55:59.606] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:55:59.845] DML res1: 0 [2025-09-23 23:56:00.283] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:56:00.283] Read Success [2025-09-23 23:56:00.283] Verifying certificate... [2025-09-23 23:56:00.539] Verified OK [2025-09-23 23:56:00.555] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:56:02.057] Verified OK [2025-09-23 23:56:02.057] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:56:02.713] Verified OK [2025-09-23 23:56:02.713] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:56:05.527] fs.protected_hardlinks = 1 [2025-09-23 23:56:05.527] fs.protected_symlinks = 1 [2025-09-23 23:56:05.543] kernel.modules_disabled = 1 [2025-09-23 23:56:05.735] [2025-09-23 23:56:05.735] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:56:06.960] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:56:14.703] SBL1:1210.0.1.0 [2025-09-23 23:56:14.751] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:56:16.317] SBL2:1210.0.1.0 [2025-09-23 23:56:16.365] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:56:16.461] j-A [2025-09-23 23:56:23.816] The R5 Autosar Classic is running [2025-09-23 23:56:23.839] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:56:23.839] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:56:24.447] INIT: version 2.96 booting [2025-09-23 23:56:24.559] INIT: Entering runlevel: 5 [2025-09-23 23:56:24.719] mtd24 attached [2025-09-23 23:56:24.719] mtd32 attached [2025-09-23 23:56:24.735] mtd28 attached [2025-09-23 23:56:24.751] ubi0:textures is mounted. [2025-09-23 23:56:24.783] RTNETLINK answers: File exists [2025-09-23 23:56:24.823] ubi1:dml_code is mounted. [2025-09-23 23:56:24.823] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:56:24.823] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:56:24.823] ubi2:animations is mounted. [2025-09-23 23:56:24.823] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:56:24.823] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:56:24.823] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:56:24.844] data.LB_FadeInType0=100 [2025-09-23 23:56:24.844] data.CHLH_FadeInType0=0 [2025-09-23 23:56:24.844] data.WU_FadeInDelay=0 [2025-09-23 23:56:24.844] max_time_out=0 [2025-09-23 23:56:24.844] No splash screen [2025-09-23 23:56:24.844] stop dss Done [2025-09-23 23:56:24.932] /dev/mem opened. [2025-09-23 23:56:24.932] Memory mapped at address 0xffffbb54c000. [2025-09-23 23:56:24.932] Read at address 0x00600018 (0xffffbb54c018): 0x00000000 [2025-09-23 23:56:24.932] Write at address 0x00600018 (0xffffbb54c018): 0x00400040, readback 0x00400040 [2025-09-23 23:56:24.932] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:56:24.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:56:25.077] Loaded PowerVR consumer services. [2025-09-23 23:56:25.109] 512+0 records in [2025-09-23 23:56:25.109] 512+0 records out [2025-09-23 23:56:25.172] Starting syslogd/klogd: done [2025-09-23 23:56:25.220] Waiting data available... [2025-09-23 23:56:25.236] DML Start [2025-09-23 23:56:25.428] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:56:25.669] DML res1: 0 [2025-09-23 23:56:26.148] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:56:26.148] Read Success [2025-09-23 23:56:26.164] Verifying certificate... [2025-09-23 23:56:26.404] Verified OK [2025-09-23 23:56:26.436] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:56:28.379] Verified OK [2025-09-23 23:56:28.379] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:56:28.981] Verified OK [2025-09-23 23:56:28.981] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:56:31.636] fs.protected_hardlinks = 1 [2025-09-23 23:56:31.652] fs.protected_symlinks = 1 [2025-09-23 23:56:31.652] kernel.modules_disabled = 1 [2025-09-23 23:56:31.844] [2025-09-23 23:56:31.844] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:56:33.714] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:56:40.479] SBL1:1210.0.1.0 [2025-09-23 23:56:40.527] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:56:42.094] SBL2:1210.0.1.0 [2025-09-23 23:56:42.142] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:56:42.237] j-A [2025-09-23 23:56:49.593] The R5 Autosar Classic is running [2025-09-23 23:56:49.593] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:56:49.614] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:56:50.222] INIT: version 2.96 booting [2025-09-23 23:56:50.333] INIT: Entering runlevel: 5 [2025-09-23 23:56:50.494] mtd24 attached [2025-09-23 23:56:50.494] mtd28 attached [2025-09-23 23:56:50.510] mtd32 attached [2025-09-23 23:56:50.557] ubi0:textures is mounted. [2025-09-23 23:56:50.557] RTNETLINK answers: File exists [2025-09-23 23:56:50.620] ubi1:animations is mounted. [2025-09-23 23:56:50.620] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:56:50.620] ubi2:dml_code is mounted. [2025-09-23 23:56:50.620] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:56:50.620] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:56:50.620] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:56:50.620] data.LB_FadeInType0=100 [2025-09-23 23:56:50.620] data.CHLH_FadeInType0=0 [2025-09-23 23:56:50.620] data.WU_FadeInDelay=0 [2025-09-23 23:56:50.620] max_time_out=0 [2025-09-23 23:56:50.620] No splash screen [2025-09-23 23:56:50.620] stop dss Done [2025-09-23 23:56:50.620] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:56:50.690] /dev/mem opened. [2025-09-23 23:56:50.690] Memory mapped at address 0xffff9698a000. [2025-09-23 23:56:50.690] Read at address 0x00600018 (0xffff9698a018): 0x00000000 [2025-09-23 23:56:50.690] Write at address 0x00600018 (0xffff9698a018): 0x00400040, readback 0x00400040 [2025-09-23 23:56:50.690] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:56:50.706] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:56:50.786] Loaded PowerVR consumer services. [2025-09-23 23:56:50.940] 512+0 records in [2025-09-23 23:56:50.940] 512+0 records out [2025-09-23 23:56:50.940] Waiting data available... [2025-09-23 23:56:50.972] Starting syslogd/klogd: done [2025-09-23 23:56:50.988] DML Start [2025-09-23 23:56:51.164] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:56:51.404] DML res1: 0 [2025-09-23 23:56:51.880] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:56:51.880] Read Success [2025-09-23 23:56:51.880] Verifying certificate... [2025-09-23 23:56:52.136] Verified OK [2025-09-23 23:56:52.152] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:56:53.902] Verified OK [2025-09-23 23:56:53.902] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:56:54.446] Verified OK [2025-09-23 23:56:54.446] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:56:57.005] fs.protected_hardlinks = 1 [2025-09-23 23:56:57.021] fs.protected_symlinks = 1 [2025-09-23 23:56:57.021] kernel.modules_disabled = 1 [2025-09-23 23:56:57.229] [2025-09-23 23:56:57.229] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:56:58.481] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:57:06.270] SBL1:1210.0.1.0 [2025-09-23 23:57:06.318] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:57:07.885] SBL2:1210.0.1.0 [2025-09-23 23:57:07.932] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:57:08.028] j-A [2025-09-23 23:57:15.402] The R5 Autosar Classic is running [2025-09-23 23:57:15.402] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:57:15.402] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:57:16.010] INIT: version 2.96 booting [2025-09-23 23:57:16.106] INIT: Entering runlevel: 5 [2025-09-23 23:57:16.266] mtd24 attached [2025-09-23 23:57:16.282] mtd32 attached [2025-09-23 23:57:16.282] mtd28 attached [2025-09-23 23:57:16.330] ubi0:textures is mounted. [2025-09-23 23:57:16.330] RTNETLINK answers: File exists [2025-09-23 23:57:16.346] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:57:16.383] ubi1:dml_code is mounted. [2025-09-23 23:57:16.383] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:57:16.383] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:57:16.383] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:57:16.383] ubi2:animations is mounted. [2025-09-23 23:57:16.383] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:57:16.398] data.LB_FadeInType0=100 [2025-09-23 23:57:16.420] data.CHLH_FadeInType0=0 [2025-09-23 23:57:16.420] data.WU_FadeInDelay=0 [2025-09-23 23:57:16.420] max_time_out=0 [2025-09-23 23:57:16.420] No splash screen [2025-09-23 23:57:16.420] stop dss Done [2025-09-23 23:57:16.435] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:57:16.452] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:57:16.487] /dev/mem opened. [2025-09-23 23:57:16.487] Memory mapped at address 0xffffbb750000. [2025-09-23 23:57:16.487] Read at address 0x00600018 (0xffffbb750018): 0x00000000 [2025-09-23 23:57:16.487] Write at address 0x00600018 (0xffffbb750018): 0x00400040, readback 0x00400040 [2025-09-23 23:57:16.631] Loaded PowerVR consumer services. [2025-09-23 23:57:16.694] 512+0 records in [2025-09-23 23:57:16.694] 512+0 records out [2025-09-23 23:57:16.726] Starting syslogd/klogd: Waiting data available... [2025-09-23 23:57:16.726] done [2025-09-23 23:57:16.742] DML Start [2025-09-23 23:57:16.934] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:57:17.158] DML res1: 0 [2025-09-23 23:57:17.647] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:57:17.647] Read Success [2025-09-23 23:57:17.647] Verifying certificate... [2025-09-23 23:57:17.902] Verified OK [2025-09-23 23:57:17.918] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:57:19.483] Verified OK [2025-09-23 23:57:19.483] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:57:20.106] Verified OK [2025-09-23 23:57:20.106] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:57:22.777] fs.protected_hardlinks = 1 [2025-09-23 23:57:22.777] fs.protected_symlinks = 1 [2025-09-23 23:57:22.793] kernel.modules_disabled = 1 [2025-09-23 23:57:22.969] [2025-09-23 23:57:22.969] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:57:24.247] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:57:32.084] SBL1:1210.0.1.0 [2025-09-23 23:57:32.116] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:57:33.699] SBL2:1210.0.1.0 [2025-09-23 23:57:33.731] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:57:33.842] j-A [2025-09-23 23:57:41.213] The R5 Autosar Classic is running [2025-09-23 23:57:41.213] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:57:41.213] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:57:41.820] INIT: version 2.96 booting [2025-09-23 23:57:41.932] INIT: Entering runlevel: 5 [2025-09-23 23:57:42.092] mtd24 attached [2025-09-23 23:57:42.108] mtd32 attached [2025-09-23 23:57:42.124] mtd28 attached [2025-09-23 23:57:42.156] ubi0:textures is mounted. [2025-09-23 23:57:42.172] ubi1:dml_code is mounted. [2025-09-23 23:57:42.172] RTNETLINK answers: File exists [2025-09-23 23:57:42.227] ubi2:animations is mounted. [2025-09-23 23:57:42.227] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:57:42.227] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:57:42.227] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:57:42.227] data.LB_FadeInType0=100 [2025-09-23 23:57:42.227] data.CHLH_FadeInType0=0 [2025-09-23 23:57:42.227] data.WU_FadeInDelay=0 [2025-09-23 23:57:42.227] max_time_out=0 [2025-09-23 23:57:42.227] No splash screen [2025-09-23 23:57:42.227] stop dss Done [2025-09-23 23:57:42.227] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:57:42.227] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:57:42.292] /dev/mem opened. [2025-09-23 23:57:42.292] Memory mapped at address 0xffff8c950000. [2025-09-23 23:57:42.292] Read at address 0x00600018 (0xffff8c950018): 0x00000000 [2025-09-23 23:57:42.292] Write at address 0x00600018 (0xffff8c950018): 0x00400040, readback 0x00400040 [2025-09-23 23:57:42.308] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:57:42.324] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:57:42.420] Loaded PowerVR consumer services. [2025-09-23 23:57:42.532] 512+0 records in [2025-09-23 23:57:42.558] 512+0 records out [2025-09-23 23:57:42.558] Waiting data available... [2025-09-23 23:57:42.574] Starting syslogd/klogd: done [2025-09-23 23:57:42.590] DML Start [2025-09-23 23:57:42.766] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:57:43.022] DML res1: 0 [2025-09-23 23:57:43.437] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:57:43.453] Read Success [2025-09-23 23:57:43.453] Verifying certificate... [2025-09-23 23:57:43.693] Verified OK [2025-09-23 23:57:43.709] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:57:45.415] Verified OK [2025-09-23 23:57:45.415] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:57:45.999] Verified OK [2025-09-23 23:57:45.999] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:57:48.637] fs.protected_hardlinks = 1 [2025-09-23 23:57:48.637] fs.protected_symlinks = 1 [2025-09-23 23:57:48.653] kernel.modules_disabled = 1 [2025-09-23 23:57:48.845] [2025-09-23 23:57:48.861] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:57:50.079] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:57:57.862] SBL1:1210.0.1.0 [2025-09-23 23:57:57.893] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:57:59.477] SBL2:1210.0.1.0 [2025-09-23 23:57:59.509] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:57:59.620] j-A [2025-09-23 23:58:06.991] The R5 Autosar Classic is running [2025-09-23 23:58:06.991] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:58:06.991] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:58:07.599] INIT: version 2.96 booting [2025-09-23 23:58:07.711] INIT: Entering runlevel: 5 [2025-09-23 23:58:07.855] mtd24 attached [2025-09-23 23:58:07.871] mtd28 attached [2025-09-23 23:58:07.887] mtd32 attached [2025-09-23 23:58:07.935] RTNETLINK answers: File exists [2025-09-23 23:58:07.935] ubi0:textures is mounted. [2025-09-23 23:58:07.992] ubi1:animations is mounted. [2025-09-23 23:58:07.992] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:58:07.992] ubi2:dml_code is mounted. [2025-09-23 23:58:07.992] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:58:07.992] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:58:07.992] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:58:07.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:58:07.992] data.LB_FadeInType0=100 [2025-09-23 23:58:07.992] data.CHLH_FadeInType0=0 [2025-09-23 23:58:07.992] data.WU_FadeInDelay=0 [2025-09-23 23:58:07.992] max_time_out=0 [2025-09-23 23:58:07.992] No splash screen [2025-09-23 23:58:07.992] stop dss Done [2025-09-23 23:58:08.064] /dev/mem opened. [2025-09-23 23:58:08.064] Memory mapped at address 0xffffb36d1000. [2025-09-23 23:58:08.064] Read at address 0x00600018 (0xffffb36d1018): 0x00000000 [2025-09-23 23:58:08.064] Write at address 0x00600018 (0xffffb36d1018): 0x00400040, readback 0x00400040 [2025-09-23 23:58:08.110] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:58:08.110] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:58:08.270] Loaded PowerVR consumer services. [2025-09-23 23:58:08.302] 512+0 records in [2025-09-23 23:58:08.318] 512+0 records out [2025-09-23 23:58:08.334] Waiting data available... [2025-09-23 23:58:08.350] Starting syslogd/klogd: done [2025-09-23 23:58:08.366] DML Start [2025-09-23 23:58:08.541] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:58:08.750] DML res1: 0 [2025-09-23 23:58:09.229] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:58:09.245] Read Success [2025-09-23 23:58:09.245] Verifying certificate... [2025-09-23 23:58:09.549] Verified OK [2025-09-23 23:58:09.565] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:58:11.211] Verified OK [2025-09-23 23:58:11.211] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:58:11.862] Verified OK [2025-09-23 23:58:11.862] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:58:14.421] fs.protected_hardlinks = 1 [2025-09-23 23:58:14.436] fs.protected_symlinks = 1 [2025-09-23 23:58:14.436] kernel.modules_disabled = 1 [2025-09-23 23:58:14.628] [2025-09-23 23:58:14.628] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:58:15.838] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:58:23.640] SBL1:1210.0.1.0 [2025-09-23 23:58:23.688] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:58:25.255] SBL2:1210.0.1.0 [2025-09-23 23:58:25.303] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:58:25.399] j-A [2025-09-23 23:58:32.753] The R5 Autosar Classic is running [2025-09-23 23:58:32.775] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:58:32.775] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:58:33.383] INIT: version 2.96 booting [2025-09-23 23:58:33.495] INIT: Entering runlevel: 5 [2025-09-23 23:58:33.655] mtd28 attached [2025-09-23 23:58:33.656] mtd32 attached [2025-09-23 23:58:33.671] mtd24 attached [2025-09-23 23:58:33.719] ubi0:animations is mounted. [2025-09-23 23:58:33.719] RTNETLINK answers: File exists [2025-09-23 23:58:33.755] ubi1:dml_code is mounted. [2025-09-23 23:58:33.755] ubi2:textures is mounted. [2025-09-23 23:58:33.755] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:58:33.755] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:58:33.794] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:58:33.794] data.LB_FadeInType0=100 [2025-09-23 23:58:33.794] data.CHLH_FadeInType0=0 [2025-09-23 23:58:33.794] data.WU_FadeInDelay=0 [2025-09-23 23:58:33.794] max_time_out=0 [2025-09-23 23:58:33.794] No splash screen [2025-09-23 23:58:33.794] stop dss Done [2025-09-23 23:58:33.794] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:58:33.794] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:58:33.851] /dev/mem opened. [2025-09-23 23:58:33.851] Memory mapped at address 0xffffaf6bd000. [2025-09-23 23:58:33.851] Read at address 0x00600018 (0xffffaf6bd018): 0x00000000 [2025-09-23 23:58:33.851] Write at address 0x00600018 (0xffffaf6bd018): 0x00400040, readback 0x00400040 [2025-09-23 23:58:33.851] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:58:33.867] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:58:34.043] Loaded PowerVR consumer services. [2025-09-23 23:58:34.091] 512+0 records in [2025-09-23 23:58:34.091] 512+0 records out [2025-09-23 23:58:34.122] Waiting data available... [2025-09-23 23:58:34.138] Starting syslogd/klogd: done [2025-09-23 23:58:34.154] DML Start [2025-09-23 23:58:34.347] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:58:34.571] DML res1: 0 [2025-09-23 23:58:35.047] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:58:35.047] Read Success [2025-09-23 23:58:35.047] Verifying certificate... [2025-09-23 23:58:35.319] Verified OK [2025-09-23 23:58:35.335] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:58:36.963] Verified OK [2025-09-23 23:58:36.963] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:58:37.587] Verified OK [2025-09-23 23:58:37.587] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:58:40.241] fs.protected_hardlinks = 1 [2025-09-23 23:58:40.241] fs.protected_symlinks = 1 [2025-09-23 23:58:40.257] kernel.modules_disabled = 1 [2025-09-23 23:58:40.449] [2025-09-23 23:58:40.449] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:58:41.643] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:58:49.421] SBL1:1210.0.1.0 [2025-09-23 23:58:49.469] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:58:51.036] SBL2:1210.0.1.0 [2025-09-23 23:58:51.068] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:58:51.180] j-A [2025-09-23 23:58:58.555] The R5 Autosar Classic is running [2025-09-23 23:58:58.555] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:58:58.555] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:58:59.162] INIT: version 2.96 booting [2025-09-23 23:58:59.274] INIT: Entering runlevel: 5 [2025-09-23 23:58:59.434] mtd28 attached [2025-09-23 23:58:59.434] mtd24 attached [2025-09-23 23:58:59.450] mtd32 attached [2025-09-23 23:58:59.482] ubi0:animations is mounted. [2025-09-23 23:58:59.498] RTNETLINK answers: File exists [2025-09-23 23:58:59.498] ubi1:textures is mounted. [2025-09-23 23:58:59.557] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:58:59.557] ubi2:dml_code is mounted. [2025-09-23 23:58:59.557] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:58:59.557] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:58:59.557] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:58:59.557] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:58:59.557] data.LB_FadeInType0=100 [2025-09-23 23:58:59.557] data.CHLH_FadeInType0=0 [2025-09-23 23:58:59.557] data.WU_FadeInDelay=0 [2025-09-23 23:58:59.557] max_time_out=0 [2025-09-23 23:58:59.557] No splash screen [2025-09-23 23:58:59.557] stop dss Done [2025-09-23 23:58:59.637] /dev/mem opened. [2025-09-23 23:58:59.637] Memory mapped at address 0xffffa2a21000. [2025-09-23 23:58:59.637] Read at address 0x00600018 (0xffffa2a21018): 0x00000000 [2025-09-23 23:58:59.637] Write at address 0x00600018 (0xffffa2a21018): 0x00400040, readback 0x00400040 [2025-09-23 23:58:59.661] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:58:59.661] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:58:59.742] Loaded PowerVR consumer services. [2025-09-23 23:58:59.837] 512+0 records in [2025-09-23 23:58:59.837] 512+0 records out [2025-09-23 23:58:59.885] Starting syslogd/klogd: done [2025-09-23 23:58:59.933] Waiting data available... [2025-09-23 23:58:59.933] DML Start [2025-09-23 23:59:00.110] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:59:00.349] DML res1: 0 [2025-09-23 23:59:00.781] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:59:00.802] Read Success [2025-09-23 23:59:00.802] Verifying certificate... [2025-09-23 23:59:01.025] Verified OK [2025-09-23 23:59:01.041] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:59:02.750] Verified OK [2025-09-23 23:59:02.750] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:59:03.326] Verified OK [2025-09-23 23:59:03.326] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:59:05.964] fs.protected_hardlinks = 1 [2025-09-23 23:59:05.964] fs.protected_symlinks = 1 [2025-09-23 23:59:05.979] kernel.modules_disabled = 1 [2025-09-23 23:59:06.155] [2025-09-23 23:59:06.155] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:59:07.407] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:59:15.220] SBL1:1210.0.1.0 [2025-09-23 23:59:15.268] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:59:16.835] SBL2:1210.0.1.0 [2025-09-23 23:59:16.867] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:59:16.979] j-A [2025-09-23 23:59:24.355] The R5 Autosar Classic is running [2025-09-23 23:59:24.355] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:59:24.355] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:59:24.963] INIT: version 2.96 booting [2025-09-23 23:59:25.074] INIT: Entering runlevel: 5 [2025-09-23 23:59:25.219] mtd24 attached [2025-09-23 23:59:25.235] mtd32 attached [2025-09-23 23:59:25.251] mtd28 attached [2025-09-23 23:59:25.267] ubi0:textures is mounted. [2025-09-23 23:59:25.335] RTNETLINK answers: File exists [2025-09-23 23:59:25.335] ubi2:animations is mounted. [2025-09-23 23:59:25.335] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:59:25.335] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:59:25.335] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:59:25.335] ubi1:dml_code is mounted. [2025-09-23 23:59:25.335] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:59:25.335] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:59:25.357] data.LB_FadeInType0=100 [2025-09-23 23:59:25.357] data.CHLH_FadeInType0=0 [2025-09-23 23:59:25.357] data.WU_FadeInDelay=0 [2025-09-23 23:59:25.357] max_time_out=0 [2025-09-23 23:59:25.357] No splash screen [2025-09-23 23:59:25.357] stop dss Done [2025-09-23 23:59:25.404] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:59:25.444] /dev/mem opened. [2025-09-23 23:59:25.444] Memory mapped at address 0xffff8a319000. [2025-09-23 23:59:25.444] Read at address 0x00600018 (0xffff8a319018): 0x00000000 [2025-09-23 23:59:25.444] Write at address 0x00600018 (0xffff8a319018): 0x00400040, readback 0x00400040 [2025-09-23 23:59:25.444] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:59:25.605] Loaded PowerVR consumer services. [2025-09-23 23:59:25.652] 512+0 records in [2025-09-23 23:59:25.652] 512+0 records out [2025-09-23 23:59:25.700] Starting syslogd/klogd: done [2025-09-23 23:59:25.732] Waiting data available... [2025-09-23 23:59:25.732] DML Start [2025-09-23 23:59:25.941] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:59:26.148] DML res1: 0 [2025-09-23 23:59:26.577] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:59:26.577] Read Success [2025-09-23 23:59:26.577] Verifying certificate... [2025-09-23 23:59:26.833] Verified OK [2025-09-23 23:59:26.848] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:59:28.437] Verified OK [2025-09-23 23:59:28.437] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:59:28.988] Verified OK [2025-09-23 23:59:28.988] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:59:31.785] fs.protected_hardlinks = 1 [2025-09-23 23:59:31.785] fs.protected_symlinks = 1 [2025-09-23 23:59:31.801] kernel.modules_disabled = 1 [2025-09-23 23:59:31.994] [2025-09-23 23:59:31.994] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:59:33.198] RTNETLINK answers: Cannot assign requested address [2025-09-23 23:59:41.004] SBL1:1210.0.1.0 [2025-09-23 23:59:41.036] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:59:42.619] SBL2:1210.0.1.0 [2025-09-23 23:59:42.651] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-23 23:59:42.763] j-A [2025-09-23 23:59:50.103] The R5 Autosar Classic is running [2025-09-23 23:59:50.128] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-23 23:59:50.128] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-23 23:59:50.735] INIT: version 2.96 booting [2025-09-23 23:59:50.847] INIT: Entering runlevel: 5 [2025-09-23 23:59:51.008] mtd24 attached [2025-09-23 23:59:51.023] mtd32 attached [2025-09-23 23:59:51.023] mtd28 attached [2025-09-23 23:59:51.071] RTNETLINK answers: File exists [2025-09-23 23:59:51.116] ubi1:dml_code is mounted. [2025-09-23 23:59:51.116] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-23 23:59:51.116] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-23 23:59:51.116] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-23 23:59:51.116] ubi0:textures is mounted. [2025-09-23 23:59:51.116] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-23 23:59:51.116] ubi2:animations is mounted. [2025-09-23 23:59:51.116] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-23 23:59:51.116] data.LB_FadeInType0=100 [2025-09-23 23:59:51.116] data.CHLH_FadeInType0=0 [2025-09-23 23:59:51.138] data.WU_FadeInDelay=0 [2025-09-23 23:59:51.138] max_time_out=0 [2025-09-23 23:59:51.138] No splash screen [2025-09-23 23:59:51.138] stop dss Done [2025-09-23 23:59:51.186] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-23 23:59:51.219] /dev/mem opened. [2025-09-23 23:59:51.219] Memory mapped at address 0xffffac20c000. [2025-09-23 23:59:51.219] Read at address 0x00600018 (0xffffac20c018): 0x00000000 [2025-09-23 23:59:51.219] Write at address 0x00600018 (0xffffac20c018): 0x00400040, readback 0x00400040 [2025-09-23 23:59:51.219] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-23 23:59:51.346] Loaded PowerVR consumer services. [2025-09-23 23:59:51.426] 512+0 records in [2025-09-23 23:59:51.426] 512+0 records out [2025-09-23 23:59:51.458] Waiting data available... [2025-09-23 23:59:51.474] Starting syslogd/klogd: done [2025-09-23 23:59:51.490] DML Start [2025-09-23 23:59:51.666] Esel version: 3.102.0.0-IAA10.27 [2025-09-23 23:59:51.922] DML res1: 0 [2025-09-23 23:59:52.310] Read DML Algo certificate (mtd31) and save to file [2025-09-23 23:59:52.310] Read Success [2025-09-23 23:59:52.310] Verifying certificate... [2025-09-23 23:59:52.535] Verified OK [2025-09-23 23:59:52.551] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-23 23:59:54.150] Verified OK [2025-09-23 23:59:54.150] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-23 23:59:54.729] Verified OK [2025-09-23 23:59:54.729] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-23 23:59:57.574] fs.protected_hardlinks = 1 [2025-09-23 23:59:57.574] fs.protected_symlinks = 1 [2025-09-23 23:59:57.574] kernel.modules_disabled = 1 [2025-09-23 23:59:57.765] [2025-09-23 23:59:57.765] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-23 23:59:59.012] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:00:06.777] SBL1:1210.0.1.0 [2025-09-24 00:00:06.825] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:00:08.391] SBL2:1210.0.1.0 [2025-09-24 00:00:08.439] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:00:08.535] j-A [2025-09-24 00:00:15.891] The R5 Autosar Classic is running [2025-09-24 00:00:15.891] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:00:15.912] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:00:16.519] INIT: version 2.96 booting [2025-09-24 00:00:16.631] INIT: Entering runlevel: 5 [2025-09-24 00:00:16.775] mtd24 attached [2025-09-24 00:00:16.792] mtd28 attached [2025-09-24 00:00:16.824] mtd32 attached [2025-09-24 00:00:16.824] ubi0:textures is mounted. [2025-09-24 00:00:16.856] ubi1:animations is mounted. [2025-09-24 00:00:16.856] RTNETLINK answers: File exists [2025-09-24 00:00:16.914] ubi2:dml_code is mounted. [2025-09-24 00:00:16.914] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:00:16.914] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:00:16.914] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:00:16.914] data.LB_FadeInType0=100 [2025-09-24 00:00:16.914] data.CHLH_FadeInType0=0 [2025-09-24 00:00:16.914] data.WU_FadeInDelay=0 [2025-09-24 00:00:16.914] max_time_out=0 [2025-09-24 00:00:16.914] No splash screen [2025-09-24 00:00:16.914] stop dss Done [2025-09-24 00:00:16.914] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:00:16.914] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:00:16.946] /dev/mem opened. [2025-09-24 00:00:16.946] Memory mapped at address 0xffffbd0eb000. [2025-09-24 00:00:16.972] Read at address 0x00600018 (0xffffbd0eb018): 0x00000000 [2025-09-24 00:00:16.972] Write at address 0x00600018 (0xffffbd0eb018): 0x00400040, readback 0x00400040 [2025-09-24 00:00:16.988] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:00:17.004] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:00:17.068] Loaded PowerVR consumer services. [2025-09-24 00:00:17.227] Waiting data available... [2025-09-24 00:00:17.227] 512+0 records in [2025-09-24 00:00:17.227] 512+0 records out [2025-09-24 00:00:17.259] Starting syslogd/klogd: done [2025-09-24 00:00:17.275] DML Start [2025-09-24 00:00:17.451] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:00:17.675] DML res1: 0 [2025-09-24 00:00:18.123] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:00:18.123] Read Success [2025-09-24 00:00:18.138] Verifying certificate... [2025-09-24 00:00:18.363] Verified OK [2025-09-24 00:00:18.379] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:00:20.099] Verified OK [2025-09-24 00:00:20.099] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:00:20.674] Verified OK [2025-09-24 00:00:20.674] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:00:23.393] fs.protected_hardlinks = 1 [2025-09-24 00:00:23.393] fs.protected_symlinks = 1 [2025-09-24 00:00:23.409] kernel.modules_disabled = 1 [2025-09-24 00:00:23.584] [2025-09-24 00:00:23.584] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:00:24.697] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:00:32.562] SBL1:1210.0.1.0 [2025-09-24 00:00:32.610] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:00:34.176] SBL2:1210.0.1.0 [2025-09-24 00:00:34.224] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:00:34.321] j-A [2025-09-24 00:00:41.676] The R5 Autosar Classic is running [2025-09-24 00:00:41.697] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:00:41.697] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:00:42.305] INIT: version 2.96 booting [2025-09-24 00:00:42.416] INIT: Entering runlevel: 5 [2025-09-24 00:00:42.577] mtd28 attached [2025-09-24 00:00:42.577] mtd24 attached [2025-09-24 00:00:42.609] ubi0:animations is mounted. [2025-09-24 00:00:42.625] mtd32 attached [2025-09-24 00:00:42.625] ubi1:textures is mounted. [2025-09-24 00:00:42.699] RTNETLINK answers: File exists [2025-09-24 00:00:42.699] ubi2:dml_code is mounted. [2025-09-24 00:00:42.699] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:00:42.699] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:00:42.699] data.LB_FadeInType0=100 [2025-09-24 00:00:42.699] data.CHLH_FadeInType0=0 [2025-09-24 00:00:42.699] data.WU_FadeInDelay=0 [2025-09-24 00:00:42.699] max_time_out=0 [2025-09-24 00:00:42.699] No splash screen [2025-09-24 00:00:42.699] stop dss Done [2025-09-24 00:00:42.699] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:00:42.699] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:00:42.699] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:00:42.751] /dev/mem opened. [2025-09-24 00:00:42.751] Memory mapped at address 0xffffa042a000. [2025-09-24 00:00:42.751] Read at address 0x00600018 (0xffffa042a018): 0x00000000 [2025-09-24 00:00:42.751] Write at address 0x00600018 (0xffffa042a018): 0x00400040, readback 0x00400040 [2025-09-24 00:00:42.751] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:00:42.767] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:00:42.927] Loaded PowerVR consumer services. [2025-09-24 00:00:43.051] Waiting data available... [2025-09-24 00:00:43.051] 512+0 records in [2025-09-24 00:00:43.051] 512+0 records out [2025-09-24 00:00:43.083] Starting syslogd/klogd: done [2025-09-24 00:00:43.099] DML Start [2025-09-24 00:00:43.275] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:00:43.467] DML res1: 0 [2025-09-24 00:00:43.947] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:00:43.968] Read Success [2025-09-24 00:00:43.968] Verifying certificate... [2025-09-24 00:00:44.207] Verified OK [2025-09-24 00:00:44.223] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:00:45.892] Verified OK [2025-09-24 00:00:45.892] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:00:46.531] Verified OK [2025-09-24 00:00:46.531] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:00:49.186] fs.protected_hardlinks = 1 [2025-09-24 00:00:49.202] fs.protected_symlinks = 1 [2025-09-24 00:00:49.202] kernel.modules_disabled = 1 [2025-09-24 00:00:49.393] [2025-09-24 00:00:49.393] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:00:50.583] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:00:58.347] SBL1:1210.0.1.0 [2025-09-24 00:00:58.395] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:00:59.962] SBL2:1210.0.1.0 [2025-09-24 00:00:59.994] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:01:00.106] j-A [2025-09-24 00:01:07.480] The R5 Autosar Classic is running [2025-09-24 00:01:07.480] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:01:07.480] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:01:08.087] INIT: version 2.96 booting [2025-09-24 00:01:08.200] INIT: Entering runlevel: 5 [2025-09-24 00:01:08.359] mtd24 attached [2025-09-24 00:01:08.359] mtd32 attached [2025-09-24 00:01:08.375] mtd28 attached [2025-09-24 00:01:08.407] ubi0:textures is mounted. [2025-09-24 00:01:08.423] RTNETLINK answers: File exists [2025-09-24 00:01:08.478] ubi1:dml_code is mounted. [2025-09-24 00:01:08.478] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:01:08.478] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:01:08.478] ubi2:animations is mounted. [2025-09-24 00:01:08.478] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:01:08.478] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:01:08.478] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:01:08.478] data.LB_FadeInType0=100 [2025-09-24 00:01:08.478] data.CHLH_FadeInType0=0 [2025-09-24 00:01:08.478] data.WU_FadeInDelay=0 [2025-09-24 00:01:08.478] max_time_out=0 [2025-09-24 00:01:08.478] No splash screen [2025-09-24 00:01:08.478] stop dss Done [2025-09-24 00:01:08.527] /dev/mem opened. [2025-09-24 00:01:08.527] Memory mapped at address 0xffff98e77000. [2025-09-24 00:01:08.559] Read at address 0x00600018 (0xffff98e77018): 0x00000000 [2025-09-24 00:01:08.559] Write at address 0x00600018 (0xffff98e77018): 0x00400040, readback 0x00400040 [2025-09-24 00:01:08.559] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:01:08.559] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:01:08.670] Loaded PowerVR consumer services. [2025-09-24 00:01:08.813] 512+0 records in [2025-09-24 00:01:08.813] 512+0 records out [2025-09-24 00:01:08.813] Waiting data available... [2025-09-24 00:01:08.845] Starting syslogd/klogd: done [2025-09-24 00:01:08.861] DML Start [2025-09-24 00:01:09.036] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:01:09.277] DML res1: 0 [2025-09-24 00:01:09.723] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:01:09.723] Read Success [2025-09-24 00:01:09.723] Verifying certificate... [2025-09-24 00:01:09.963] Verified OK [2025-09-24 00:01:09.979] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:01:11.536] Verified OK [2025-09-24 00:01:11.536] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:01:12.192] Verified OK [2025-09-24 00:01:12.208] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:01:14.895] fs.protected_hardlinks = 1 [2025-09-24 00:01:14.910] fs.protected_symlinks = 1 [2025-09-24 00:01:14.910] kernel.modules_disabled = 1 [2025-09-24 00:01:15.119] [2025-09-24 00:01:15.119] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:01:16.379] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:01:24.129] SBL1:1210.0.1.0 [2025-09-24 00:01:24.177] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:01:25.744] SBL2:1210.0.1.0 [2025-09-24 00:01:25.776] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:01:25.888] j-A [2025-09-24 00:01:33.261] The R5 Autosar Classic is running [2025-09-24 00:01:33.261] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:01:33.261] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:01:33.870] INIT: version 2.96 booting [2025-09-24 00:01:33.981] INIT: Entering runlevel: 5 [2025-09-24 00:01:34.125] mtd24 attached [2025-09-24 00:01:34.141] mtd28 attached [2025-09-24 00:01:34.157] mtd32 attached [2025-09-24 00:01:34.189] ubi0:textures is mounted. [2025-09-24 00:01:34.205] RTNETLINK answers: File exists [2025-09-24 00:01:34.263] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:01:34.263] ubi1:animations is mounted. [2025-09-24 00:01:34.263] ubi2:dml_code is mounted. [2025-09-24 00:01:34.263] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:01:34.263] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:01:34.263] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:01:34.263] data.LB_FadeInType0=100 [2025-09-24 00:01:34.263] data.CHLH_FadeInType0=0 [2025-09-24 00:01:34.263] data.WU_FadeInDelay=0 [2025-09-24 00:01:34.263] max_time_out=0 [2025-09-24 00:01:34.263] No splash screen [2025-09-24 00:01:34.263] stop dss Done [2025-09-24 00:01:34.263] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:01:34.295] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:01:34.329] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:01:34.329] /dev/mem opened. [2025-09-24 00:01:34.329] Memory mapped at address 0xffffa36bc000. [2025-09-24 00:01:34.329] Read at address 0x00600018 (0xffffa36bc018): 0x00000000 [2025-09-24 00:01:34.329] Write at address 0x00600018 (0xffffa36bc018): 0x00400040, readback 0x00400040 [2025-09-24 00:01:34.441] Loaded PowerVR consumer services. [2025-09-24 00:01:34.583] Waiting data available... [2025-09-24 00:01:34.583] 512+0 records in [2025-09-24 00:01:34.583] 512+0 records out [2025-09-24 00:01:34.615] Starting syslogd/klogd: done [2025-09-24 00:01:34.631] DML Start [2025-09-24 00:01:34.806] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:01:35.030] DML res1: 0 [2025-09-24 00:01:35.508] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:01:35.508] Read Success [2025-09-24 00:01:35.508] Verifying certificate... [2025-09-24 00:01:35.731] Verified OK [2025-09-24 00:01:35.731] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:01:37.403] Verified OK [2025-09-24 00:01:37.403] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:01:37.986] Verified OK [2025-09-24 00:01:37.986] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:01:40.706] fs.protected_hardlinks = 1 [2025-09-24 00:01:40.722] fs.protected_symlinks = 1 [2025-09-24 00:01:40.722] kernel.modules_disabled = 1 [2025-09-24 00:01:40.929] [2025-09-24 00:01:40.929] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:01:42.167] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:01:49.911] SBL1:1210.0.1.0 [2025-09-24 00:01:49.959] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:01:51.526] SBL2:1210.0.1.0 [2025-09-24 00:01:51.574] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:01:51.670] j-A [2025-09-24 00:01:59.024] The R5 Autosar Classic is running [2025-09-24 00:01:59.049] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:01:59.049] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:01:59.657] INIT: version 2.96 booting [2025-09-24 00:01:59.768] INIT: Entering runlevel: 5 [2025-09-24 00:01:59.913] mtd28 attached [2025-09-24 00:01:59.929] mtd32 attached [2025-09-24 00:01:59.944] mtd24 attached [2025-09-24 00:01:59.992] ubi0:animations is mounted. [2025-09-24 00:01:59.992] RTNETLINK answers: File exists [2025-09-24 00:02:00.037] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:02:00.037] ubi2:textures is mounted. [2025-09-24 00:02:00.037] ubi1:dml_code is mounted. [2025-09-24 00:02:00.037] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:02:00.037] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:02:00.037] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:02:00.037] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:02:00.037] data.LB_FadeInType0=100 [2025-09-24 00:02:00.037] data.CHLH_FadeInType0=0 [2025-09-24 00:02:00.058] data.WU_FadeInDelay=0 [2025-09-24 00:02:00.058] max_time_out=0 [2025-09-24 00:02:00.058] No splash screen [2025-09-24 00:02:00.058] stop dss Done [2025-09-24 00:02:00.090] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:02:00.126] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:02:00.126] /dev/mem opened. [2025-09-24 00:02:00.126] Memory mapped at address 0xffffa0e3e000. [2025-09-24 00:02:00.126] Read at address 0x00600018 (0xffffa0e3e018): 0x00000000 [2025-09-24 00:02:00.126] Write at address 0x00600018 (0xffffa0e3e018): 0x00400040, readback 0x00400040 [2025-09-24 00:02:00.334] Loaded PowerVR consumer services. [2025-09-24 00:02:00.382] 512+0 records in [2025-09-24 00:02:00.382] 512+0 records out [2025-09-24 00:02:00.414] Waiting data available... [2025-09-24 00:02:00.430] Starting syslogd/klogd: done [2025-09-24 00:02:00.446] DML Start [2025-09-24 00:02:00.589] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:02:00.829] DML res1: 0 [2025-09-24 00:02:01.277] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:02:01.277] Read Success [2025-09-24 00:02:01.277] Verifying certificate... [2025-09-24 00:02:01.548] Verified OK [2025-09-24 00:02:01.564] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:02:03.347] Verified OK [2025-09-24 00:02:03.347] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:02:03.965] Verified OK [2025-09-24 00:02:03.965] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:02:06.524] fs.protected_hardlinks = 1 [2025-09-24 00:02:06.540] fs.protected_symlinks = 1 [2025-09-24 00:02:06.540] kernel.modules_disabled = 1 [2025-09-24 00:02:06.748] [2025-09-24 00:02:06.748] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:02:07.969] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:02:15.729] SBL1:1210.0.1.0 [2025-09-24 00:02:15.761] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:02:17.343] SBL2:1210.0.1.0 [2025-09-24 00:02:17.375] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:02:17.487] j-A [2025-09-24 00:02:24.825] The R5 Autosar Classic is running [2025-09-24 00:02:24.850] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:02:24.850] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:02:25.458] INIT: version 2.96 booting [2025-09-24 00:02:25.569] INIT: Entering runlevel: 5 [2025-09-24 00:02:25.730] mtd24 attached [2025-09-24 00:02:25.730] mtd28 attached [2025-09-24 00:02:25.746] mtd32 attached [2025-09-24 00:02:25.829] RTNETLINK answers: File exists [2025-09-24 00:02:25.829] ubi0:textures is mounted. [2025-09-24 00:02:25.829] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:02:25.829] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:02:25.829] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:02:25.829] ubi2:dml_code is mounted. [2025-09-24 00:02:25.829] ubi1:animations is mounted. [2025-09-24 00:02:25.829] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:02:25.829] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:02:25.860] data.LB_FadeInType0=100 [2025-09-24 00:02:25.860] data.CHLH_FadeInType0=0 [2025-09-24 00:02:25.860] data.WU_FadeInDelay=0 [2025-09-24 00:02:25.860] max_time_out=0 [2025-09-24 00:02:25.860] No splash screen [2025-09-24 00:02:25.860] stop dss Done [2025-09-24 00:02:25.876] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:02:25.892] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:02:25.942] /dev/mem opened. [2025-09-24 00:02:25.942] Memory mapped at address 0xffffaf6ed000. [2025-09-24 00:02:25.942] Read at address 0x00600018 (0xffffaf6ed018): 0x00000000 [2025-09-24 00:02:25.942] Write at address 0x00600018 (0xffffaf6ed018): 0x00400040, readback 0x00400040 [2025-09-24 00:02:26.006] Loaded PowerVR consumer services. [2025-09-24 00:02:26.133] 512+0 records in [2025-09-24 00:02:26.133] 512+0 records out [2025-09-24 00:02:26.165] Waiting data available... [2025-09-24 00:02:26.181] Starting syslogd/klogd: done [2025-09-24 00:02:26.197] DML Start [2025-09-24 00:02:26.373] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:02:26.612] DML res1: 0 [2025-09-24 00:02:27.025] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:02:27.025] Read Success [2025-09-24 00:02:27.025] Verifying certificate... [2025-09-24 00:02:27.264] Verified OK [2025-09-24 00:02:27.296] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:02:28.902] Verified OK [2025-09-24 00:02:28.902] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:02:29.536] Verified OK [2025-09-24 00:02:29.536] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:02:32.302] fs.protected_hardlinks = 1 [2025-09-24 00:02:32.332] fs.protected_symlinks = 1 [2025-09-24 00:02:32.332] kernel.modules_disabled = 1 [2025-09-24 00:02:32.524] [2025-09-24 00:02:32.524] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:02:33.708] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:02:41.484] SBL1:1210.0.1.0 [2025-09-24 00:02:41.532] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:02:43.099] SBL2:1210.0.1.0 [2025-09-24 00:02:43.130] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:02:43.242] j-A [2025-09-24 00:02:50.616] The R5 Autosar Classic is running [2025-09-24 00:02:50.616] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:02:50.616] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:02:51.223] INIT: version 2.96 booting [2025-09-24 00:02:51.336] INIT: Entering runlevel: 5 [2025-09-24 00:02:51.479] mtd28 attached [2025-09-24 00:02:51.495] mtd32 attached [2025-09-24 00:02:51.495] mtd24 attached [2025-09-24 00:02:51.598] RTNETLINK answers: File exists [2025-09-24 00:02:51.598] ubi0:animations is mounted. [2025-09-24 00:02:51.598] ubi1:dml_code is mounted. [2025-09-24 00:02:51.598] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:02:51.598] ubi2:textures is mounted. [2025-09-24 00:02:51.598] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:02:51.598] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:02:51.598] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:02:51.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:02:51.619] data.LB_FadeInType0=100 [2025-09-24 00:02:51.619] data.CHLH_FadeInType0=0 [2025-09-24 00:02:51.619] data.WU_FadeInDelay=0 [2025-09-24 00:02:51.619] max_time_out=0 [2025-09-24 00:02:51.619] No splash screen [2025-09-24 00:02:51.619] stop dss Done [2025-09-24 00:02:51.691] /dev/mem opened. [2025-09-24 00:02:51.691] Memory mapped at address 0xffffbdac1000. [2025-09-24 00:02:51.691] Read at address 0x00600018 (0xffffbdac1018): 0x00000000 [2025-09-24 00:02:51.691] Write at address 0x00600018 (0xffffbdac1018): 0x00400040, readback 0x00400040 [2025-09-24 00:02:51.707] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:02:51.723] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:02:51.851] Loaded PowerVR consumer services. [2025-09-24 00:02:51.931] 512+0 records in [2025-09-24 00:02:51.931] 512+0 records out [2025-09-24 00:02:51.963] Waiting data available... [2025-09-24 00:02:51.978] Starting syslogd/klogd: done [2025-09-24 00:02:51.995] DML Start [2025-09-24 00:02:52.155] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:02:52.362] DML res1: 0 [2025-09-24 00:02:52.856] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:02:52.856] Read Success [2025-09-24 00:02:52.856] Verifying certificate... [2025-09-24 00:02:53.127] Verified OK [2025-09-24 00:02:53.143] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:02:54.770] Verified OK [2025-09-24 00:02:54.770] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:02:55.378] Verified OK [2025-09-24 00:02:55.378] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:02:58.096] fs.protected_hardlinks = 1 [2025-09-24 00:02:58.096] fs.protected_symlinks = 1 [2025-09-24 00:02:58.112] kernel.modules_disabled = 1 [2025-09-24 00:02:58.287] [2025-09-24 00:02:58.287] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:02:59.478] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:03:07.267] SBL1:1210.0.1.0 [2025-09-24 00:03:07.315] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:03:08.882] SBL2:1210.0.1.0 [2025-09-24 00:03:08.914] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:03:09.025] j-A [2025-09-24 00:03:16.381] The R5 Autosar Classic is running [2025-09-24 00:03:16.381] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:03:16.402] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:03:17.009] INIT: version 2.96 booting [2025-09-24 00:03:17.121] INIT: Entering runlevel: 5 [2025-09-24 00:03:17.265] mtd24 attached [2025-09-24 00:03:17.281] mtd32 attached [2025-09-24 00:03:17.297] mtd28 attached [2025-09-24 00:03:17.345] RTNETLINK answers: File exists [2025-09-24 00:03:17.407] ubi1:dml_code is mounted. [2025-09-24 00:03:17.407] ubi0:textures is mounted. [2025-09-24 00:03:17.407] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:03:17.407] ubi2:animations is mounted. [2025-09-24 00:03:17.407] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:03:17.407] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:03:17.407] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:03:17.407] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:03:17.407] data.LB_FadeInType0=100 [2025-09-24 00:03:17.407] data.CHLH_FadeInType0=0 [2025-09-24 00:03:17.407] data.WU_FadeInDelay=0 [2025-09-24 00:03:17.407] max_time_out=0 [2025-09-24 00:03:17.407] No splash screen [2025-09-24 00:03:17.407] stop dss Done [2025-09-24 00:03:17.451] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:03:17.451] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:03:17.451] /dev/mem opened. [2025-09-24 00:03:17.451] Memory mapped at address 0xffff95c5e000. [2025-09-24 00:03:17.477] Read at address 0x00600018 (0xffff95c5e018): 0x00000000 [2025-09-24 00:03:17.477] Write at address 0x00600018 (0xffff95c5e018): 0x00400040, readback 0x00400040 [2025-09-24 00:03:17.700] Loaded PowerVR consumer services. [2025-09-24 00:03:17.733] Waiting data available... [2025-09-24 00:03:17.749] 512+0 records in [2025-09-24 00:03:17.749] 512+0 records out [2025-09-24 00:03:17.765] Starting syslogd/klogd: done [2025-09-24 00:03:17.781] DML Start [2025-09-24 00:03:17.956] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:03:18.149] DML res1: 0 [2025-09-24 00:03:18.651] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:03:18.651] Read Success [2025-09-24 00:03:18.651] Verifying certificate... [2025-09-24 00:03:18.939] Verified OK [2025-09-24 00:03:18.955] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:03:20.561] Verified OK [2025-09-24 00:03:20.561] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:03:21.109] Verified OK [2025-09-24 00:03:21.109] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:03:23.843] fs.protected_hardlinks = 1 [2025-09-24 00:03:23.843] fs.protected_symlinks = 1 [2025-09-24 00:03:23.859] kernel.modules_disabled = 1 [2025-09-24 00:03:24.050] [2025-09-24 00:03:24.050] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:03:25.305] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:03:33.081] SBL1:1210.0.1.0 [2025-09-24 00:03:33.112] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:03:34.696] SBL2:1210.0.1.0 [2025-09-24 00:03:34.728] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:03:34.840] j-A [2025-09-24 00:03:42.211] The R5 Autosar Classic is running [2025-09-24 00:03:42.211] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:03:42.211] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:03:42.818] INIT: version 2.96 booting [2025-09-24 00:03:42.915] INIT: Entering runlevel: 5 [2025-09-24 00:03:43.074] mtd24 attached [2025-09-24 00:03:43.090] mtd32 attached [2025-09-24 00:03:43.106] mtd28 attached [2025-09-24 00:03:43.162] ubi0:textures is mounted. [2025-09-24 00:03:43.162] ubi1:dml_code is mounted. [2025-09-24 00:03:43.162] RTNETLINK answers: File exists [2025-09-24 00:03:43.162] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:03:43.207] ubi2:animations is mounted. [2025-09-24 00:03:43.207] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:03:43.207] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:03:43.207] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:03:43.207] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:03:43.207] data.LB_FadeInType0=100 [2025-09-24 00:03:43.207] data.CHLH_FadeInType0=0 [2025-09-24 00:03:43.207] data.WU_FadeInDelay=0 [2025-09-24 00:03:43.207] max_time_out=0 [2025-09-24 00:03:43.207] No splash screen [2025-09-24 00:03:43.207] stop dss Done [2025-09-24 00:03:43.285] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:03:43.285] /dev/mem opened. [2025-09-24 00:03:43.285] Memory mapped at address 0xffffbdaf8000. [2025-09-24 00:03:43.285] Read at address 0x00600018 (0xffffbdaf8018): 0x00000000 [2025-09-24 00:03:43.285] Write at address 0x00600018 (0xffffbdaf8018): 0x00400040, readback 0x00400040 [2025-09-24 00:03:43.285] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:03:43.381] Loaded PowerVR consumer services. [2025-09-24 00:03:43.532] 512+0 records in [2025-09-24 00:03:43.532] 512+0 records out [2025-09-24 00:03:43.532] Waiting data available... [2025-09-24 00:03:43.564] Starting syslogd/klogd: done [2025-09-24 00:03:43.580] DML Start [2025-09-24 00:03:43.788] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:03:44.012] DML res1: 0 [2025-09-24 00:03:44.386] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:03:44.386] Read Success [2025-09-24 00:03:44.386] Verifying certificate... [2025-09-24 00:03:44.609] Verified OK [2025-09-24 00:03:44.625] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:03:46.238] Verified OK [2025-09-24 00:03:46.238] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:03:46.893] Verified OK [2025-09-24 00:03:46.893] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:03:49.516] fs.protected_hardlinks = 1 [2025-09-24 00:03:49.543] fs.protected_symlinks = 1 [2025-09-24 00:03:49.543] kernel.modules_disabled = 1 [2025-09-24 00:03:49.734] [2025-09-24 00:03:49.734] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:03:51.099] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:03:58.872] SBL1:1210.0.1.0 [2025-09-24 00:03:58.920] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:04:00.487] SBL2:1210.0.1.0 [2025-09-24 00:04:00.518] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:04:00.631] j-A [2025-09-24 00:04:08.005] The R5 Autosar Classic is running [2025-09-24 00:04:08.005] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:04:08.005] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:04:08.612] INIT: version 2.96 booting [2025-09-24 00:04:08.725] INIT: Entering runlevel: 5 [2025-09-24 00:04:08.868] mtd24 attached [2025-09-24 00:04:08.884] mtd28 attached [2025-09-24 00:04:08.900] mtd32 attached [2025-09-24 00:04:08.916] ubi0:textures is mounted. [2025-09-24 00:04:09.001] RTNETLINK answers: File exists [2025-09-24 00:04:09.001] ubi1:animations is mounted. [2025-09-24 00:04:09.001] ubi2:dml_code is mounted. [2025-09-24 00:04:09.001] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:04:09.001] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:04:09.001] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:04:09.001] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:04:09.001] data.LB_FadeInType0=100 [2025-09-24 00:04:09.001] data.CHLH_FadeInType0=0 [2025-09-24 00:04:09.001] data.WU_FadeInDelay=0 [2025-09-24 00:04:09.001] max_time_out=0 [2025-09-24 00:04:09.001] No splash screen [2025-09-24 00:04:09.001] stop dss Done [2025-09-24 00:04:09.001] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:04:09.033] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:04:09.069] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:04:09.069] /dev/mem opened. [2025-09-24 00:04:09.069] Memory mapped at address 0xffffbe250000. [2025-09-24 00:04:09.069] Read at address 0x00600018 (0xffffbe250018): 0x00000000 [2025-09-24 00:04:09.069] Write at address 0x00600018 (0xffffbe250018): 0x00400040, readback 0x00400040 [2025-09-24 00:04:09.293] Loaded PowerVR consumer services. [2025-09-24 00:04:09.325] 512+0 records in [2025-09-24 00:04:09.325] 512+0 records out [2025-09-24 00:04:09.357] Waiting data available... [2025-09-24 00:04:09.373] Starting syslogd/klogd: done [2025-09-24 00:04:09.389] DML Start [2025-09-24 00:04:09.565] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:04:09.789] DML res1: 0 [2025-09-24 00:04:10.243] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:04:10.243] Read Success [2025-09-24 00:04:10.243] Verifying certificate... [2025-09-24 00:04:10.483] Verified OK [2025-09-24 00:04:10.483] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:04:12.096] Verified OK [2025-09-24 00:04:12.096] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:04:12.750] Verified OK [2025-09-24 00:04:12.750] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:04:15.435] fs.protected_hardlinks = 1 [2025-09-24 00:04:15.435] fs.protected_symlinks = 1 [2025-09-24 00:04:15.435] kernel.modules_disabled = 1 [2025-09-24 00:04:15.626] [2025-09-24 00:04:15.626] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:04:16.902] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:04:24.661] SBL1:1210.0.1.0 [2025-09-24 00:04:24.709] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:04:26.275] SBL2:1210.0.1.0 [2025-09-24 00:04:26.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:04:26.420] j-A [2025-09-24 00:04:33.775] The R5 Autosar Classic is running [2025-09-24 00:04:33.775] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:04:33.796] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:04:34.404] INIT: version 2.96 booting [2025-09-24 00:04:34.515] INIT: Entering runlevel: 5 [2025-09-24 00:04:34.659] mtd28 attached [2025-09-24 00:04:34.675] mtd32 attached [2025-09-24 00:04:34.691] mtd24 attached [2025-09-24 00:04:34.739] RTNETLINK answers: File exists [2025-09-24 00:04:34.785] ubi0:animations is mounted. [2025-09-24 00:04:34.785] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:04:34.785] ubi1:dml_code is mounted. [2025-09-24 00:04:34.785] ubi2:textures is mounted. [2025-09-24 00:04:34.785] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:04:34.785] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:04:34.785] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:04:34.785] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:04:34.785] data.LB_FadeInType0=100 [2025-09-24 00:04:34.806] data.CHLH_FadeInType0=0 [2025-09-24 00:04:34.806] data.WU_FadeInDelay=0 [2025-09-24 00:04:34.806] max_time_out=0 [2025-09-24 00:04:34.806] No splash screen [2025-09-24 00:04:34.806] stop dss Done [2025-09-24 00:04:34.855] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:04:34.890] /dev/mem opened. [2025-09-24 00:04:34.890] Memory mapped at address 0xffff98c1d000. [2025-09-24 00:04:34.890] Read at address 0x00600018 (0xffff98c1d018): 0x00000000 [2025-09-24 00:04:34.890] Write at address 0x00600018 (0xffff98c1d018): 0x00400040, readback 0x00400040 [2025-09-24 00:04:34.890] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:04:35.017] Loaded PowerVR consumer services. [2025-09-24 00:04:35.141] 512+0 records in [2025-09-24 00:04:35.141] 512+0 records out [2025-09-24 00:04:35.141] Waiting data available... [2025-09-24 00:04:35.157] Starting syslogd/klogd: done [2025-09-24 00:04:35.174] DML Start [2025-09-24 00:04:35.333] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:04:35.525] DML res1: 0 [2025-09-24 00:04:36.033] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:04:36.033] Read Success [2025-09-24 00:04:36.033] Verifying certificate... [2025-09-24 00:04:36.305] Verified OK [2025-09-24 00:04:36.321] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:04:38.064] Verified OK [2025-09-24 00:04:38.064] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:04:38.710] Verified OK [2025-09-24 00:04:38.710] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:04:41.283] fs.protected_hardlinks = 1 [2025-09-24 00:04:41.283] fs.protected_symlinks = 1 [2025-09-24 00:04:41.299] kernel.modules_disabled = 1 [2025-09-24 00:04:41.491] [2025-09-24 00:04:41.491] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:04:42.655] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:04:50.467] SBL1:1210.0.1.0 [2025-09-24 00:04:50.515] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:04:52.083] SBL2:1210.0.1.0 [2025-09-24 00:04:52.114] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:04:52.227] j-A [2025-09-24 00:04:59.602] The R5 Autosar Classic is running [2025-09-24 00:04:59.602] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:04:59.602] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:05:00.209] INIT: version 2.96 booting [2025-09-24 00:05:00.322] INIT: Entering runlevel: 5 [2025-09-24 00:05:00.465] mtd24 attached [2025-09-24 00:05:00.482] mtd32 attached [2025-09-24 00:05:00.497] mtd28 attached [2025-09-24 00:05:00.545] RTNETLINK answers: File exists [2025-09-24 00:05:00.545] ubi0:textures is mounted. [2025-09-24 00:05:00.606] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:05:00.606] ubi2:animations is mounted. [2025-09-24 00:05:00.606] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:05:00.606] ubi1:dml_code is mounted. [2025-09-24 00:05:00.606] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:05:00.606] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:05:00.606] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:05:00.606] data.LB_FadeInType0=100 [2025-09-24 00:05:00.606] data.CHLH_FadeInType0=0 [2025-09-24 00:05:00.606] data.WU_FadeInDelay=0 [2025-09-24 00:05:00.606] max_time_out=0 [2025-09-24 00:05:00.606] No splash screen [2025-09-24 00:05:00.606] stop dss Done [2025-09-24 00:05:00.683] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:05:00.683] /dev/mem opened. [2025-09-24 00:05:00.683] Memory mapped at address 0xffff86021000. [2025-09-24 00:05:00.683] Read at address 0x00600018 (0xffff86021018): 0x00000000 [2025-09-24 00:05:00.683] Write at address 0x00600018 (0xffff86021018): 0x00400040, readback 0x00400040 [2025-09-24 00:05:00.683] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:05:00.891] Loaded PowerVR consumer services. [2025-09-24 00:05:00.923] 512+0 records in [2025-09-24 00:05:00.923] 512+0 records out [2025-09-24 00:05:00.955] Waiting data available... [2025-09-24 00:05:00.971] Starting syslogd/klogd: done [2025-09-24 00:05:00.987] DML Start [2025-09-24 00:05:01.179] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:05:01.402] DML res1: 0 [2025-09-24 00:05:01.851] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:05:01.872] Read Success [2025-09-24 00:05:01.872] Verifying certificate... [2025-09-24 00:05:02.112] Verified OK [2025-09-24 00:05:02.128] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:05:03.999] Verified OK [2025-09-24 00:05:03.999] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:05:04.591] Verified OK [2025-09-24 00:05:04.591] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:05:07.133] fs.protected_hardlinks = 1 [2025-09-24 00:05:07.133] fs.protected_symlinks = 1 [2025-09-24 00:05:07.149] kernel.modules_disabled = 1 [2025-09-24 00:05:07.357] [2025-09-24 00:05:07.357] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:05:08.498] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:05:16.232] SBL1:1210.0.1.0 [2025-09-24 00:05:16.263] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:05:17.846] SBL2:1210.0.1.0 [2025-09-24 00:05:17.878] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:05:17.991] j-A [2025-09-24 00:05:25.364] The R5 Autosar Classic is running [2025-09-24 00:05:25.364] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:05:25.364] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:05:25.971] INIT: version 2.96 booting [2025-09-24 00:05:26.082] INIT: Entering runlevel: 5 [2025-09-24 00:05:26.227] mtd28 attached [2025-09-24 00:05:26.243] mtd24 attached [2025-09-24 00:05:26.243] mtd32 attached [2025-09-24 00:05:26.358] RTNETLINK answers: File exists [2025-09-24 00:05:26.358] ubi0:animations is mounted. [2025-09-24 00:05:26.358] ubi1:textures is mounted. [2025-09-24 00:05:26.358] ubi2:dml_code is mounted. [2025-09-24 00:05:26.358] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:05:26.358] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:05:26.358] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:05:26.358] data.LB_FadeInType0=100 [2025-09-24 00:05:26.358] data.CHLH_FadeInType0=0 [2025-09-24 00:05:26.358] data.WU_FadeInDelay=0 [2025-09-24 00:05:26.358] max_time_out=0 [2025-09-24 00:05:26.358] No splash screen [2025-09-24 00:05:26.358] stop dss Done [2025-09-24 00:05:26.358] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:05:26.358] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:05:26.457] /dev/mem opened. [2025-09-24 00:05:26.457] Memory mapped at address 0xffff90df8000. [2025-09-24 00:05:26.457] Read at address 0x00600018 (0xffff90df8018): 0x00000000 [2025-09-24 00:05:26.457] Write at address 0x00600018 (0xffff90df8018): 0x00400040, readback 0x00400040 [2025-09-24 00:05:26.457] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:05:26.457] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:05:26.537] Loaded PowerVR consumer services. [2025-09-24 00:05:26.664] 512+0 records in [2025-09-24 00:05:26.664] 512+0 records out [2025-09-24 00:05:26.680] Waiting data available... [2025-09-24 00:05:26.696] Starting syslogd/klogd: done [2025-09-24 00:05:26.712] DML Start [2025-09-24 00:05:26.905] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:05:27.144] DML res1: 0 [2025-09-24 00:05:27.488] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:05:27.488] Read Success [2025-09-24 00:05:27.488] Verifying certificate... [2025-09-24 00:05:27.727] Verified OK [2025-09-24 00:05:27.744] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:05:29.432] Verified OK [2025-09-24 00:05:29.432] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:05:30.120] Verified OK [2025-09-24 00:05:30.120] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:05:32.867] fs.protected_hardlinks = 1 [2025-09-24 00:05:32.867] fs.protected_symlinks = 1 [2025-09-24 00:05:32.867] kernel.modules_disabled = 1 [2025-09-24 00:05:33.058] [2025-09-24 00:05:33.058] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:05:34.225] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:05:42.008] SBL1:1210.0.1.0 [2025-09-24 00:05:42.056] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:05:43.623] SBL2:1210.0.1.0 [2025-09-24 00:05:43.671] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:05:43.767] j-A [2025-09-24 00:05:51.121] The R5 Autosar Classic is running [2025-09-24 00:05:51.143] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:05:51.143] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:05:51.751] INIT: version 2.96 booting [2025-09-24 00:05:51.862] INIT: Entering runlevel: 5 [2025-09-24 00:05:52.023] mtd24 attached [2025-09-24 00:05:52.039] mtd32 attached [2025-09-24 00:05:52.039] mtd28 attached [2025-09-24 00:05:52.087] ubi0:textures is mounted. [2025-09-24 00:05:52.087] RTNETLINK answers: File exists [2025-09-24 00:05:52.147] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:05:52.147] ubi2:animations is mounted. [2025-09-24 00:05:52.147] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:05:52.147] ubi1:dml_code is mounted. [2025-09-24 00:05:52.147] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:05:52.147] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:05:52.147] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:05:52.147] data.LB_FadeInType0=100 [2025-09-24 00:05:52.147] data.CHLH_FadeInType0=0 [2025-09-24 00:05:52.147] data.WU_FadeInDelay=0 [2025-09-24 00:05:52.147] max_time_out=0 [2025-09-24 00:05:52.147] No splash screen [2025-09-24 00:05:52.147] stop dss Done [2025-09-24 00:05:52.194] /dev/mem opened. [2025-09-24 00:05:52.194] Memory mapped at address 0xffffb3e8f000. [2025-09-24 00:05:52.220] Read at address 0x00600018 (0xffffb3e8f018): 0x00000000 [2025-09-24 00:05:52.220] Write at address 0x00600018 (0xffffb3e8f018): 0x00400040, readback 0x00400040 [2025-09-24 00:05:52.220] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:05:52.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:05:52.332] Loaded PowerVR consumer services. [2025-09-24 00:05:52.459] 512+0 records in [2025-09-24 00:05:52.459] 512+0 records out [2025-09-24 00:05:52.492] Waiting data available... [2025-09-24 00:05:52.524] Starting syslogd/klogd: done [2025-09-24 00:05:52.539] DML Start [2025-09-24 00:05:52.683] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:05:52.907] DML res1: 0 [2025-09-24 00:05:53.371] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:05:53.371] Read Success [2025-09-24 00:05:53.387] Verifying certificate... [2025-09-24 00:05:53.627] Verified OK [2025-09-24 00:05:53.643] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:05:55.226] Verified OK [2025-09-24 00:05:55.226] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:05:55.893] Verified OK [2025-09-24 00:05:55.893] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:05:58.532] fs.protected_hardlinks = 1 [2025-09-24 00:05:58.532] fs.protected_symlinks = 1 [2025-09-24 00:05:58.547] kernel.modules_disabled = 1 [2025-09-24 00:05:58.755] [2025-09-24 00:05:58.755] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:05:59.946] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:06:07.826] SBL1:1210.0.1.0 [2025-09-24 00:06:07.858] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:06:09.441] SBL2:1210.0.1.0 [2025-09-24 00:06:09.473] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:06:09.585] j-A [2025-09-24 00:06:16.957] The R5 Autosar Classic is running [2025-09-24 00:06:16.957] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:06:16.957] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:06:17.565] INIT: version 2.96 booting [2025-09-24 00:06:17.676] INIT: Entering runlevel: 5 [2025-09-24 00:06:17.820] mtd24 attached [2025-09-24 00:06:17.836] mtd32 attached [2025-09-24 00:06:17.852] mtd28 attached [2025-09-24 00:06:17.868] ubi0:textures is mounted. [2025-09-24 00:06:17.900] ubi1:dml_code is mounted. [2025-09-24 00:06:17.900] RTNETLINK answers: File exists [2025-09-24 00:06:17.964] ubi2:animations is mounted. [2025-09-24 00:06:17.964] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:06:17.964] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:06:17.964] data.LB_FadeInType0=100 [2025-09-24 00:06:17.964] data.CHLH_FadeInType0=0 [2025-09-24 00:06:17.964] data.WU_FadeInDelay=0 [2025-09-24 00:06:17.964] max_time_out=0 [2025-09-24 00:06:17.964] No splash screen [2025-09-24 00:06:17.964] stop dss Done [2025-09-24 00:06:17.964] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:06:17.964] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:06:17.964] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:06:17.997] /dev/mem opened. [2025-09-24 00:06:17.997] Memory mapped at address 0xffff9cdba000. [2025-09-24 00:06:18.042] Read at address 0x00600018 (0xffff9cdba018): 0x00000000 [2025-09-24 00:06:18.042] Write at address 0x00600018 (0xffff9cdba018): 0x00400040, readback 0x00400040 [2025-09-24 00:06:18.042] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:06:18.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:06:18.138] Loaded PowerVR consumer services. [2025-09-24 00:06:18.289] Waiting data available... [2025-09-24 00:06:18.289] 512+0 records in [2025-09-24 00:06:18.289] 512+0 records out [2025-09-24 00:06:18.305] Starting syslogd/klogd: done [2025-09-24 00:06:18.321] DML Start [2025-09-24 00:06:18.513] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:06:18.720] DML res1: 0 [2025-09-24 00:06:19.166] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:06:19.166] Read Success [2025-09-24 00:06:19.166] Verifying certificate... [2025-09-24 00:06:19.406] Verified OK [2025-09-24 00:06:19.422] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:06:21.005] Verified OK [2025-09-24 00:06:21.005] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:06:21.653] Verified OK [2025-09-24 00:06:21.653] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:06:24.403] fs.protected_hardlinks = 1 [2025-09-24 00:06:24.403] fs.protected_symlinks = 1 [2025-09-24 00:06:24.419] kernel.modules_disabled = 1 [2025-09-24 00:06:24.611] [2025-09-24 00:06:24.611] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:06:25.840] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:06:33.583] SBL1:1210.0.1.0 [2025-09-24 00:06:33.631] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:06:35.198] SBL2:1210.0.1.0 [2025-09-24 00:06:35.230] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:06:35.342] j-A [2025-09-24 00:06:42.695] The R5 Autosar Classic is running [2025-09-24 00:06:42.695] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:06:42.716] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:06:43.324] INIT: version 2.96 booting [2025-09-24 00:06:43.436] INIT: Entering runlevel: 5 [2025-09-24 00:06:43.596] mtd32 attached [2025-09-24 00:06:43.596] mtd24 attached [2025-09-24 00:06:43.612] mtd28 attached [2025-09-24 00:06:43.644] ubi0:dml_code is mounted. [2025-09-24 00:06:43.660] RTNETLINK answers: File exists [2025-09-24 00:06:43.660] ubi1:textures is mounted. [2025-09-24 00:06:43.718] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:06:43.718] ubi2:animations is mounted. [2025-09-24 00:06:43.718] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:06:43.718] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:06:43.718] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:06:43.718] data.LB_FadeInType0=100 [2025-09-24 00:06:43.718] data.CHLH_FadeInType0=0 [2025-09-24 00:06:43.718] data.WU_FadeInDelay=0 [2025-09-24 00:06:43.718] max_time_out=0 [2025-09-24 00:06:43.718] No splash screen [2025-09-24 00:06:43.718] stop dss Done [2025-09-24 00:06:43.718] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:06:43.799] /dev/mem opened. [2025-09-24 00:06:43.799] Memory mapped at address 0xffff82dfb000. [2025-09-24 00:06:43.799] Read at address 0x00600018 (0xffff82dfb018): 0x00000000 [2025-09-24 00:06:43.799] Write at address 0x00600018 (0xffff82dfb018): 0x00400040, readback 0x00400040 [2025-09-24 00:06:43.799] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:06:43.815] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:06:43.896] Loaded PowerVR consumer services. [2025-09-24 00:06:44.054] 512+0 records in [2025-09-24 00:06:44.054] 512+0 records out [2025-09-24 00:06:44.054] Waiting data available... [2025-09-24 00:06:44.086] Starting syslogd/klogd: done [2025-09-24 00:06:44.102] DML Start [2025-09-24 00:06:44.246] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:06:44.455] DML res1: 0 [2025-09-24 00:06:44.970] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:06:44.970] Read Success [2025-09-24 00:06:44.970] Verifying certificate... [2025-09-24 00:06:45.210] Verified OK [2025-09-24 00:06:45.210] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:06:46.921] Verified OK [2025-09-24 00:06:46.921] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:06:47.520] Verified OK [2025-09-24 00:06:47.520] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:06:50.126] fs.protected_hardlinks = 1 [2025-09-24 00:06:50.126] fs.protected_symlinks = 1 [2025-09-24 00:06:50.126] kernel.modules_disabled = 1 [2025-09-24 00:06:50.317] [2025-09-24 00:06:50.317] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:06:51.596] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:06:59.364] SBL1:1210.0.1.0 [2025-09-24 00:06:59.395] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:07:00.978] SBL2:1210.0.1.0 [2025-09-24 00:07:01.010] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:07:01.123] j-A [2025-09-24 00:07:08.495] The R5 Autosar Classic is running [2025-09-24 00:07:08.495] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:07:08.495] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:07:09.101] INIT: version 2.96 booting [2025-09-24 00:07:09.213] INIT: Entering runlevel: 5 [2025-09-24 00:07:09.373] mtd28 attached [2025-09-24 00:07:09.373] mtd24 attached [2025-09-24 00:07:09.405] mtd32 attached [2025-09-24 00:07:09.497] ubi0:animations is mounted. [2025-09-24 00:07:09.497] RTNETLINK answers: File exists [2025-09-24 00:07:09.497] ubi1:textures is mounted. [2025-09-24 00:07:09.497] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:07:09.497] ubi2:dml_code is mounted. [2025-09-24 00:07:09.497] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:07:09.497] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:07:09.497] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:07:09.497] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:07:09.497] data.LB_FadeInType0=100 [2025-09-24 00:07:09.497] data.CHLH_FadeInType0=0 [2025-09-24 00:07:09.497] data.WU_FadeInDelay=0 [2025-09-24 00:07:09.497] max_time_out=0 [2025-09-24 00:07:09.497] No splash screen [2025-09-24 00:07:09.497] stop dss Done [2025-09-24 00:07:09.576] /dev/mem opened. [2025-09-24 00:07:09.576] Memory mapped at address 0xffff8a8d4000. [2025-09-24 00:07:09.576] Read at address 0x00600018 (0xffff8a8d4018): 0x00000000 [2025-09-24 00:07:09.576] Write at address 0x00600018 (0xffff8a8d4018): 0x00400040, readback 0x00400040 [2025-09-24 00:07:09.576] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:07:09.576] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:07:09.752] Loaded PowerVR consumer services. [2025-09-24 00:07:09.800] 512+0 records in [2025-09-24 00:07:09.800] 512+0 records out [2025-09-24 00:07:09.832] Waiting data available... [2025-09-24 00:07:09.848] Starting syslogd/klogd: done [2025-09-24 00:07:09.864] DML Start [2025-09-24 00:07:10.040] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:07:10.280] DML res1: 0 [2025-09-24 00:07:10.696] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:07:10.717] Read Success [2025-09-24 00:07:10.717] Verifying certificate... [2025-09-24 00:07:10.940] Verified OK [2025-09-24 00:07:10.956] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:07:12.691] Verified OK [2025-09-24 00:07:12.691] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:07:13.314] Verified OK [2025-09-24 00:07:13.330] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:07:15.841] fs.protected_hardlinks = 1 [2025-09-24 00:07:15.857] fs.protected_symlinks = 1 [2025-09-24 00:07:15.857] kernel.modules_disabled = 1 [2025-09-24 00:07:16.048] [2025-09-24 00:07:16.048] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:07:17.357] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:07:25.142] SBL1:1210.0.1.0 [2025-09-24 00:07:25.190] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:07:26.757] SBL2:1210.0.1.0 [2025-09-24 00:07:26.805] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:07:26.901] j-A [2025-09-24 00:07:34.255] The R5 Autosar Classic is running [2025-09-24 00:07:34.280] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:07:34.280] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:07:34.888] INIT: version 2.96 booting [2025-09-24 00:07:35.000] INIT: Entering runlevel: 5 [2025-09-24 00:07:35.159] mtd32 attached [2025-09-24 00:07:35.159] mtd24 attached [2025-09-24 00:07:35.175] mtd28 attached [2025-09-24 00:07:35.224] ubi0:dml_code is mounted. [2025-09-24 00:07:35.224] ubi1:textures is mounted. [2025-09-24 00:07:35.289] RTNETLINK answers: File exists [2025-09-24 00:07:35.289] ubi2:animations is mounted. [2025-09-24 00:07:35.289] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:07:35.289] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:07:35.289] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:07:35.289] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:07:35.289] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:07:35.289] data.LB_FadeInType0=100 [2025-09-24 00:07:35.289] data.CHLH_FadeInType0=0 [2025-09-24 00:07:35.289] data.WU_FadeInDelay=0 [2025-09-24 00:07:35.289] max_time_out=0 [2025-09-24 00:07:35.289] No splash screen [2025-09-24 00:07:35.289] stop dss Done [2025-09-24 00:07:35.321] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:07:35.337] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:07:35.337] /dev/mem opened. [2025-09-24 00:07:35.370] Memory mapped at address 0xffff9cccb000. [2025-09-24 00:07:35.370] Read at address 0x00600018 (0xffff9cccb018): 0x00000000 [2025-09-24 00:07:35.370] Write at address 0x00600018 (0xffff9cccb018): 0x00400040, readback 0x00400040 [2025-09-24 00:07:35.561] Loaded PowerVR consumer services. [2025-09-24 00:07:35.594] 512+0 records in [2025-09-24 00:07:35.594] 512+0 records out [2025-09-24 00:07:35.626] Starting syslogd/klogd: Waiting data available... [2025-09-24 00:07:35.642] done [2025-09-24 00:07:35.642] DML Start [2025-09-24 00:07:35.834] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:07:36.040] DML res1: 0 [2025-09-24 00:07:36.484] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:07:36.484] Read Success [2025-09-24 00:07:36.484] Verifying certificate... [2025-09-24 00:07:36.723] Verified OK [2025-09-24 00:07:36.739] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:07:38.304] Verified OK [2025-09-24 00:07:38.304] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:07:38.922] Verified OK [2025-09-24 00:07:38.922] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:07:41.705] fs.protected_hardlinks = 1 [2025-09-24 00:07:41.705] fs.protected_symlinks = 1 [2025-09-24 00:07:41.720] kernel.modules_disabled = 1 [2025-09-24 00:07:41.913] [2025-09-24 00:07:41.913] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:07:43.121] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:07:50.939] SBL1:1210.0.1.0 [2025-09-24 00:07:50.987] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:07:52.554] SBL2:1210.0.1.0 [2025-09-24 00:07:52.601] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:07:52.697] j-A [2025-09-24 00:08:00.053] The R5 Autosar Classic is running [2025-09-24 00:08:00.076] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:08:00.076] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:08:00.683] INIT: version 2.96 booting [2025-09-24 00:08:00.795] INIT: Entering runlevel: 5 [2025-09-24 00:08:00.955] mtd24 attached [2025-09-24 00:08:00.955] mtd28 attached [2025-09-24 00:08:00.971] mtd32 attached [2025-09-24 00:08:01.019] RTNETLINK answers: File exists [2025-09-24 00:08:01.081] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:08:01.081] ubi0:textures is mounted. [2025-09-24 00:08:01.081] ubi1:animations is mounted. [2025-09-24 00:08:01.081] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:08:01.081] ubi2:dml_code is mounted. [2025-09-24 00:08:01.081] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:08:01.081] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:08:01.081] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:08:01.081] data.LB_FadeInType0=100 [2025-09-24 00:08:01.081] data.CHLH_FadeInType0=0 [2025-09-24 00:08:01.081] data.WU_FadeInDelay=0 [2025-09-24 00:08:01.081] max_time_out=0 [2025-09-24 00:08:01.081] No splash screen [2025-09-24 00:08:01.081] stop dss Done [2025-09-24 00:08:01.113] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:08:01.151] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:08:01.151] /dev/mem opened. [2025-09-24 00:08:01.151] Memory mapped at address 0xffffbceb0000. [2025-09-24 00:08:01.151] Read at address 0x00600018 (0xffffbceb0018): 0x00000000 [2025-09-24 00:08:01.151] Write at address 0x00600018 (0xffffbceb0018): 0x00400040, readback 0x00400040 [2025-09-24 00:08:01.311] Loaded PowerVR consumer services. [2025-09-24 00:08:01.434] Waiting data available... [2025-09-24 00:08:01.434] 512+0 records in [2025-09-24 00:08:01.434] 512+0 records out [2025-09-24 00:08:01.466] Starting syslogd/klogd: done [2025-09-24 00:08:01.482] DML Start [2025-09-24 00:08:01.658] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:08:01.897] DML res1: 0 [2025-09-24 00:08:02.352] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:08:02.352] Read Success [2025-09-24 00:08:02.352] Verifying certificate... [2025-09-24 00:08:02.576] Verified OK [2025-09-24 00:08:02.591] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:08:04.197] Verified OK [2025-09-24 00:08:04.197] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:08:04.781] Verified OK [2025-09-24 00:08:04.781] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:08:07.531] fs.protected_hardlinks = 1 [2025-09-24 00:08:07.547] fs.protected_symlinks = 1 [2025-09-24 00:08:07.547] kernel.modules_disabled = 1 [2025-09-24 00:08:07.755] [2025-09-24 00:08:07.755] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:08:08.959] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:08:16.726] SBL1:1210.0.1.0 [2025-09-24 00:08:16.774] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:08:18.342] SBL2:1210.0.1.0 [2025-09-24 00:08:18.390] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:08:18.486] j-A [2025-09-24 00:08:25.842] The R5 Autosar Classic is running [2025-09-24 00:08:25.866] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:08:25.866] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:08:26.473] INIT: version 2.96 booting [2025-09-24 00:08:26.584] INIT: Entering runlevel: 5 [2025-09-24 00:08:26.745] mtd32 attached [2025-09-24 00:08:26.745] mtd28 attached [2025-09-24 00:08:26.761] mtd24 attached [2025-09-24 00:08:26.840] RTNETLINK answers: File exists [2025-09-24 00:08:26.840] ubi1:animations is mounted. [2025-09-24 00:08:26.840] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:08:26.840] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:08:26.840] ubi0:dml_code is mounted. [2025-09-24 00:08:26.840] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:08:26.840] ubi2:textures is mounted. [2025-09-24 00:08:26.840] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:08:26.840] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:08:26.864] data.LB_FadeInType0=100 [2025-09-24 00:08:26.864] data.CHLH_FadeInType0=0 [2025-09-24 00:08:26.864] data.WU_FadeInDelay=0 [2025-09-24 00:08:26.864] max_time_out=0 [2025-09-24 00:08:26.864] No splash screen [2025-09-24 00:08:26.864] stop dss Done [2025-09-24 00:08:26.896] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:08:26.939] /dev/mem opened. [2025-09-24 00:08:26.939] Memory mapped at address 0xffff9a2c8000. [2025-09-24 00:08:26.939] Read at address 0x00600018 (0xffff9a2c8018): 0x00000000 [2025-09-24 00:08:26.939] Write at address 0x00600018 (0xffff9a2c8018): 0x00400040, readback 0x00400040 [2025-09-24 00:08:26.939] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:08:27.019] Loaded PowerVR consumer services. [2025-09-24 00:08:27.193] Waiting data available... [2025-09-24 00:08:27.193] 512+0 records in [2025-09-24 00:08:27.193] 512+0 records out [2025-09-24 00:08:27.209] Starting syslogd/klogd: done [2025-09-24 00:08:27.225] DML Start [2025-09-24 00:08:27.384] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:08:27.577] DML res1: 0 [2025-09-24 00:08:28.109] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:08:28.109] Read Success [2025-09-24 00:08:28.109] Verifying certificate... [2025-09-24 00:08:28.364] Verified OK [2025-09-24 00:08:28.380] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:08:30.146] Verified OK [2025-09-24 00:08:30.146] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:08:30.634] Verified OK [2025-09-24 00:08:30.634] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:08:33.001] fs.protected_hardlinks = 1 [2025-09-24 00:08:33.001] fs.protected_symlinks = 1 [2025-09-24 00:08:33.016] kernel.modules_disabled = 1 [2025-09-24 00:08:33.224] [2025-09-24 00:08:33.224] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:08:34.721] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:08:42.531] SBL1:1210.0.1.0 [2025-09-24 00:08:42.579] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:08:44.144] SBL2:1210.0.1.0 [2025-09-24 00:08:44.176] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:08:44.289] j-A [2025-09-24 00:08:51.666] The R5 Autosar Classic is running [2025-09-24 00:08:51.666] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:08:51.666] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:08:52.273] INIT: version 2.96 booting [2025-09-24 00:08:52.385] INIT: Entering runlevel: 5 [2025-09-24 00:08:52.529] mtd24 attached [2025-09-24 00:08:52.545] mtd28 attached [2025-09-24 00:08:52.561] mtd32 attached [2025-09-24 00:08:52.659] RTNETLINK answers: File exists [2025-09-24 00:08:52.659] ubi1:animations is mounted. [2025-09-24 00:08:52.659] ubi0:textures is mounted. [2025-09-24 00:08:52.659] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:08:52.659] ubi2:dml_code is mounted. [2025-09-24 00:08:52.659] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:08:52.659] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:08:52.659] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:08:52.659] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:08:52.659] data.LB_FadeInType0=100 [2025-09-24 00:08:52.659] data.CHLH_FadeInType0=0 [2025-09-24 00:08:52.659] data.WU_FadeInDelay=0 [2025-09-24 00:08:52.659] max_time_out=0 [2025-09-24 00:08:52.659] No splash screen [2025-09-24 00:08:52.659] stop dss Done [2025-09-24 00:08:52.706] /dev/mem opened. [2025-09-24 00:08:52.706] Memory mapped at address 0xffffab4c6000. [2025-09-24 00:08:52.738] Read at address 0x00600018 (0xffffab4c6018): 0x00000000 [2025-09-24 00:08:52.738] Write at address 0x00600018 (0xffffab4c6018): 0x00400040, readback 0x00400040 [2025-09-24 00:08:52.738] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:08:52.738] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:08:52.979] Loaded PowerVR consumer services. [2025-09-24 00:08:53.011] Waiting data available... [2025-09-24 00:08:53.027] 512+0 records in [2025-09-24 00:08:53.027] 512+0 records out [2025-09-24 00:08:53.058] Starting syslogd/klogd: done [2025-09-24 00:08:53.074] DML Start [2025-09-24 00:08:53.250] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:08:53.507] DML res1: 0 [2025-09-24 00:08:53.874] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:08:53.874] Read Success [2025-09-24 00:08:53.890] Verifying certificate... [2025-09-24 00:08:54.130] Verified OK [2025-09-24 00:08:54.146] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:08:55.885] Verified OK [2025-09-24 00:08:55.885] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:08:56.428] Verified OK [2025-09-24 00:08:56.444] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:08:59.082] fs.protected_hardlinks = 1 [2025-09-24 00:08:59.098] fs.protected_symlinks = 1 [2025-09-24 00:08:59.098] kernel.modules_disabled = 1 [2025-09-24 00:08:59.306] [2025-09-24 00:08:59.306] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:09:00.582] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:09:08.314] SBL1:1210.0.1.0 [2025-09-24 00:09:08.362] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:09:09.930] SBL2:1210.0.1.0 [2025-09-24 00:09:09.978] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:09:10.073] j-A [2025-09-24 00:09:17.429] The R5 Autosar Classic is running [2025-09-24 00:09:17.453] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:09:17.453] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:09:18.061] INIT: version 2.96 booting [2025-09-24 00:09:18.172] INIT: Entering runlevel: 5 [2025-09-24 00:09:18.317] mtd24 attached [2025-09-24 00:09:18.333] mtd32 attached [2025-09-24 00:09:18.365] ubi0:textures is mounted. [2025-09-24 00:09:18.365] mtd28 attached [2025-09-24 00:09:18.396] ubi1:dml_code is mounted. [2025-09-24 00:09:18.396] ubi2:animations is mounted. [2025-09-24 00:09:18.413] RTNETLINK answers: File exists [2025-09-24 00:09:18.463] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:09:18.463] data.LB_FadeInType0=100 [2025-09-24 00:09:18.463] data.CHLH_FadeInType0=0 [2025-09-24 00:09:18.463] data.WU_FadeInDelay=0 [2025-09-24 00:09:18.463] max_time_out=0 [2025-09-24 00:09:18.463] No splash screen [2025-09-24 00:09:18.463] stop dss Done [2025-09-24 00:09:18.463] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:09:18.463] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:09:18.463] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:09:18.463] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:09:18.495] /dev/mem opened. [2025-09-24 00:09:18.527] Memory mapped at address 0xffff8fe6f000. [2025-09-24 00:09:18.527] Read at address 0x00600018 (0xffff8fe6f018): 0x00000000 [2025-09-24 00:09:18.527] Write at address 0x00600018 (0xffff8fe6f018): 0x00400040, readback 0x00400040 [2025-09-24 00:09:18.543] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:09:18.576] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:09:18.672] Loaded PowerVR consumer services. [2025-09-24 00:09:18.767] 512+0 records in [2025-09-24 00:09:18.767] 512+0 records out [2025-09-24 00:09:18.784] Waiting data available... [2025-09-24 00:09:18.800] Starting syslogd/klogd: done [2025-09-24 00:09:18.816] DML Start [2025-09-24 00:09:19.023] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:09:19.263] DML res1: 0 [2025-09-24 00:09:19.614] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:09:19.614] Read Success [2025-09-24 00:09:19.614] Verifying certificate... [2025-09-24 00:09:19.902] Verified OK [2025-09-24 00:09:19.918] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:09:21.627] Verified OK [2025-09-24 00:09:21.627] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:09:22.279] Verified OK [2025-09-24 00:09:22.279] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:09:24.933] fs.protected_hardlinks = 1 [2025-09-24 00:09:24.950] fs.protected_symlinks = 1 [2025-09-24 00:09:24.950] kernel.modules_disabled = 1 [2025-09-24 00:09:25.157] [2025-09-24 00:09:25.157] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:09:26.302] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:09:34.114] SBL1:1210.0.1.0 [2025-09-24 00:09:34.162] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:09:35.729] SBL2:1210.0.1.0 [2025-09-24 00:09:35.777] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:09:35.873] j-A [2025-09-24 00:09:43.229] The R5 Autosar Classic is running [2025-09-24 00:09:43.253] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:09:43.253] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:09:43.860] INIT: version 2.96 booting [2025-09-24 00:09:43.972] INIT: Entering runlevel: 5 [2025-09-24 00:09:44.116] mtd24 attached [2025-09-24 00:09:44.132] mtd28 attached [2025-09-24 00:09:44.148] mtd32 attached [2025-09-24 00:09:44.196] RTNETLINK answers: File exists [2025-09-24 00:09:44.254] ubi0:textures is mounted. [2025-09-24 00:09:44.255] ubi1:animations is mounted. [2025-09-24 00:09:44.255] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:09:44.255] ubi2:dml_code is mounted. [2025-09-24 00:09:44.255] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:09:44.255] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:09:44.255] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:09:44.255] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:09:44.255] data.LB_FadeInType0=100 [2025-09-24 00:09:44.255] data.CHLH_FadeInType0=0 [2025-09-24 00:09:44.255] data.WU_FadeInDelay=0 [2025-09-24 00:09:44.255] max_time_out=0 [2025-09-24 00:09:44.255] No splash screen [2025-09-24 00:09:44.255] stop dss Done [2025-09-24 00:09:44.327] /dev/mem opened. [2025-09-24 00:09:44.327] Memory mapped at address 0xffffa34de000. [2025-09-24 00:09:44.327] Read at address 0x00600018 (0xffffa34de018): 0x00000000 [2025-09-24 00:09:44.327] Write at address 0x00600018 (0xffffa34de018): 0x00400040, readback 0x00400040 [2025-09-24 00:09:44.327] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:09:44.343] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:09:44.535] Loaded PowerVR consumer services. [2025-09-24 00:09:44.583] 512+0 records in [2025-09-24 00:09:44.599] 512+0 records out [2025-09-24 00:09:44.615] Starting syslogd/klogd: Waiting data available... [2025-09-24 00:09:44.647] done [2025-09-24 00:09:44.647] DML Start [2025-09-24 00:09:44.775] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:09:44.966] DML res1: 0 [2025-09-24 00:09:45.508] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:09:45.508] Read Success [2025-09-24 00:09:45.508] Verifying certificate... [2025-09-24 00:09:45.748] Verified OK [2025-09-24 00:09:45.764] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:09:47.423] Verified OK [2025-09-24 00:09:47.423] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:09:47.976] Verified OK [2025-09-24 00:09:47.976] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:09:50.726] fs.protected_hardlinks = 1 [2025-09-24 00:09:50.726] fs.protected_symlinks = 1 [2025-09-24 00:09:50.741] kernel.modules_disabled = 1 [2025-09-24 00:09:50.918] [2025-09-24 00:09:50.918] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:09:52.113] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:09:59.932] SBL1:1210.0.1.0 [2025-09-24 00:09:59.964] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:10:01.548] SBL2:1210.0.1.0 [2025-09-24 00:10:01.579] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:10:01.691] j-A [2025-09-24 00:10:09.063] The R5 Autosar Classic is running [2025-09-24 00:10:09.063] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:10:09.063] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:10:09.671] INIT: version 2.96 booting [2025-09-24 00:10:09.782] INIT: Entering runlevel: 5 [2025-09-24 00:10:09.927] mtd24 attached [2025-09-24 00:10:09.942] mtd28 attached [2025-09-24 00:10:09.975] mtd32 attached [2025-09-24 00:10:09.975] ubi0:textures is mounted. [2025-09-24 00:10:10.007] ubi1:animations is mounted. [2025-09-24 00:10:10.007] RTNETLINK answers: File exists [2025-09-24 00:10:10.062] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:10:10.062] ubi2:dml_code is mounted. [2025-09-24 00:10:10.062] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:10:10.062] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:10:10.062] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:10:10.062] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:10:10.062] data.LB_FadeInType0=100 [2025-09-24 00:10:10.062] data.CHLH_FadeInType0=0 [2025-09-24 00:10:10.062] data.WU_FadeInDelay=0 [2025-09-24 00:10:10.062] max_time_out=0 [2025-09-24 00:10:10.062] No splash screen [2025-09-24 00:10:10.062] stop dss Done [2025-09-24 00:10:10.110] /dev/mem opened. [2025-09-24 00:10:10.110] Memory mapped at address 0xffffbe800000. [2025-09-24 00:10:10.141] Read at address 0x00600018 (0xffffbe800018): 0x00000000 [2025-09-24 00:10:10.141] Write at address 0x00600018 (0xffffbe800018): 0x00400040, readback 0x00400040 [2025-09-24 00:10:10.141] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:10:10.141] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:10:10.237] Loaded PowerVR consumer services. [2025-09-24 00:10:10.395] Waiting data available... [2025-09-24 00:10:10.395] 512+0 records in [2025-09-24 00:10:10.395] 512+0 records out [2025-09-24 00:10:10.427] Starting syslogd/klogd: done [2025-09-24 00:10:10.443] DML Start [2025-09-24 00:10:10.603] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:10:10.875] DML res1: 0 [2025-09-24 00:10:11.275] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:10:11.296] Read Success [2025-09-24 00:10:11.296] Verifying certificate... [2025-09-24 00:10:11.519] Verified OK [2025-09-24 00:10:11.535] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:10:13.134] Verified OK [2025-09-24 00:10:13.134] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:10:13.838] Verified OK [2025-09-24 00:10:13.838] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:10:16.490] fs.protected_hardlinks = 1 [2025-09-24 00:10:16.490] fs.protected_symlinks = 1 [2025-09-24 00:10:16.490] kernel.modules_disabled = 1 [2025-09-24 00:10:16.666] [2025-09-24 00:10:16.666] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:10:17.943] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:10:25.752] SBL1:1210.0.1.0 [2025-09-24 00:10:25.784] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:10:27.367] SBL2:1210.0.1.0 [2025-09-24 00:10:27.399] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:10:27.510] j-A [2025-09-24 00:10:34.848] The R5 Autosar Classic is running [2025-09-24 00:10:34.873] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:10:34.873] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:10:35.482] INIT: version 2.96 booting [2025-09-24 00:10:35.593] INIT: Entering runlevel: 5 [2025-09-24 00:10:35.754] mtd28 attached [2025-09-24 00:10:35.754] mtd32 attached [2025-09-24 00:10:35.769] mtd24 attached [2025-09-24 00:10:35.817] RTNETLINK answers: File exists [2025-09-24 00:10:35.817] ubi0:animations is mounted. [2025-09-24 00:10:35.858] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:10:35.858] ubi2:textures is mounted. [2025-09-24 00:10:35.858] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:10:35.858] ubi1:dml_code is mounted. [2025-09-24 00:10:35.858] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:10:35.858] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:10:35.858] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:10:35.879] data.LB_FadeInType0=100 [2025-09-24 00:10:35.879] data.CHLH_FadeInType0=0 [2025-09-24 00:10:35.879] data.WU_FadeInDelay=0 [2025-09-24 00:10:35.879] max_time_out=0 [2025-09-24 00:10:35.879] No splash screen [2025-09-24 00:10:35.879] stop dss Done [2025-09-24 00:10:35.927] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:10:35.927] /dev/mem opened. [2025-09-24 00:10:35.959] Memory mapped at address 0xffffa54c8000. [2025-09-24 00:10:35.959] Read at address 0x00600018 (0xffffa54c8018): 0x00000000 [2025-09-24 00:10:35.959] Write at address 0x00600018 (0xffffa54c8018): 0x00400040, readback 0x00400040 [2025-09-24 00:10:35.959] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:10:36.071] Loaded PowerVR consumer services. [2025-09-24 00:10:36.182] 512+0 records in [2025-09-24 00:10:36.182] 512+0 records out [2025-09-24 00:10:36.198] Waiting data available... [2025-09-24 00:10:36.231] Starting syslogd/klogd: done [2025-09-24 00:10:36.263] DML Start [2025-09-24 00:10:36.486] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:10:36.694] DML res1: 0 [2025-09-24 00:10:37.074] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:10:37.074] Read Success [2025-09-24 00:10:37.074] Verifying certificate... [2025-09-24 00:10:37.314] Verified OK [2025-09-24 00:10:37.330] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:10:38.957] Verified OK [2025-09-24 00:10:38.957] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:10:39.588] Verified OK [2025-09-24 00:10:39.588] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:10:42.259] fs.protected_hardlinks = 1 [2025-09-24 00:10:42.289] fs.protected_symlinks = 1 [2025-09-24 00:10:42.289] kernel.modules_disabled = 1 [2025-09-24 00:10:42.481] [2025-09-24 00:10:42.481] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:10:43.758] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:10:51.539] SBL1:1210.0.1.0 [2025-09-24 00:10:51.571] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:10:53.154] SBL2:1210.0.1.0 [2025-09-24 00:10:53.186] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:10:53.298] j-A [2025-09-24 00:11:00.635] The R5 Autosar Classic is running [2025-09-24 00:11:00.660] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:11:00.660] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:11:01.268] INIT: version 2.96 booting [2025-09-24 00:11:01.380] INIT: Entering runlevel: 5 [2025-09-24 00:11:01.540] mtd28 attached [2025-09-24 00:11:01.540] mtd24 attached [2025-09-24 00:11:01.556] mtd32 attached [2025-09-24 00:11:01.588] ubi0:animations is mounted. [2025-09-24 00:11:01.632] RTNETLINK answers: File exists [2025-09-24 00:11:01.632] ubi1:textures is mounted. [2025-09-24 00:11:01.632] ubi2:dml_code is mounted. [2025-09-24 00:11:01.632] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:11:01.666] data.LB_FadeInType0=100 [2025-09-24 00:11:01.666] data.CHLH_FadeInType0=0 [2025-09-24 00:11:01.666] data.WU_FadeInDelay=0 [2025-09-24 00:11:01.666] max_time_out=0 [2025-09-24 00:11:01.666] No splash screen [2025-09-24 00:11:01.666] stop dss Done [2025-09-24 00:11:01.666] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:11:01.666] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:11:01.696] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:11:01.696] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:11:01.712] /dev/mem opened. [2025-09-24 00:11:01.712] Memory mapped at address 0xffff980b8000. [2025-09-24 00:11:01.737] Read at address 0x00600018 (0xffff980b8018): 0x00000000 [2025-09-24 00:11:01.737] Write at address 0x00600018 (0xffff980b8018): 0x00400040, readback 0x00400040 [2025-09-24 00:11:01.768] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:11:01.768] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:11:01.945] Loaded PowerVR consumer services. [2025-09-24 00:11:01.993] Waiting data available... [2025-09-24 00:11:02.009] 512+0 records in [2025-09-24 00:11:02.009] 512+0 records out [2025-09-24 00:11:02.040] Starting syslogd/klogd: done [2025-09-24 00:11:02.056] DML Start [2025-09-24 00:11:02.200] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:11:02.407] DML res1: 0 [2025-09-24 00:11:02.887] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:11:02.903] Read Success [2025-09-24 00:11:02.903] Verifying certificate... [2025-09-24 00:11:03.128] Verified OK [2025-09-24 00:11:03.144] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:11:04.831] Verified OK [2025-09-24 00:11:04.831] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:11:05.455] Verified OK [2025-09-24 00:11:05.455] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:11:08.157] fs.protected_hardlinks = 1 [2025-09-24 00:11:08.157] fs.protected_symlinks = 1 [2025-09-24 00:11:08.172] kernel.modules_disabled = 1 [2025-09-24 00:11:08.365] [2025-09-24 00:11:08.365] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:11:09.532] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:11:17.324] SBL1:1210.0.1.0 [2025-09-24 00:11:17.356] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:11:18.939] SBL2:1210.0.1.0 [2025-09-24 00:11:18.971] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:11:19.082] j-A [2025-09-24 00:11:26.455] The R5 Autosar Classic is running [2025-09-24 00:11:26.455] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:11:26.455] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:11:27.063] INIT: version 2.96 booting [2025-09-24 00:11:27.175] INIT: Entering runlevel: 5 [2025-09-24 00:11:27.334] mtd28 attached [2025-09-24 00:11:27.334] mtd24 attached [2025-09-24 00:11:27.351] mtd32 attached [2025-09-24 00:11:27.399] ubi0:animations is mounted. [2025-09-24 00:11:27.399] RTNETLINK answers: File exists [2025-09-24 00:11:27.460] ubi1:textures is mounted. [2025-09-24 00:11:27.460] ubi2:dml_code is mounted. [2025-09-24 00:11:27.460] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:11:27.460] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:11:27.460] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:11:27.460] data.LB_FadeInType0=100 [2025-09-24 00:11:27.460] data.CHLH_FadeInType0=0 [2025-09-24 00:11:27.460] data.WU_FadeInDelay=0 [2025-09-24 00:11:27.460] max_time_out=0 [2025-09-24 00:11:27.460] No splash screen [2025-09-24 00:11:27.460] stop dss Done [2025-09-24 00:11:27.460] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:11:27.460] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:11:27.508] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:11:27.541] /dev/mem opened. [2025-09-24 00:11:27.541] Memory mapped at address 0xffffa8d48000. [2025-09-24 00:11:27.541] Read at address 0x00600018 (0xffffa8d48018): 0x00000000 [2025-09-24 00:11:27.541] Write at address 0x00600018 (0xffffa8d48018): 0x00400040, readback 0x00400040 [2025-09-24 00:11:27.541] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:11:27.668] Loaded PowerVR consumer services. [2025-09-24 00:11:27.803] Waiting data available... [2025-09-24 00:11:27.803] 512+0 records in [2025-09-24 00:11:27.803] 512+0 records out [2025-09-24 00:11:27.835] Starting syslogd/klogd: done [2025-09-24 00:11:27.851] DML Start [2025-09-24 00:11:28.027] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:11:28.267] DML res1: 0 [2025-09-24 00:11:28.680] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:11:28.680] Read Success [2025-09-24 00:11:28.680] Verifying certificate... [2025-09-24 00:11:28.920] Verified OK [2025-09-24 00:11:28.936] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:11:30.535] Verified OK [2025-09-24 00:11:30.535] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:11:31.231] Verified OK [2025-09-24 00:11:31.231] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:11:33.816] fs.protected_hardlinks = 1 [2025-09-24 00:11:33.816] fs.protected_symlinks = 1 [2025-09-24 00:11:33.816] kernel.modules_disabled = 1 [2025-09-24 00:11:33.992] [2025-09-24 00:11:33.992] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:11:35.366] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:11:37.668] @SBL1:1210.0.1.0 [2025-09-24 00:11:43.151] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:11:44.734] SBL2:1210.0.1.0 [2025-09-24 00:11:44.766] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:11:44.877] j-A [2025-09-24 00:11:52.247] The R5 Autosar Classic is running [2025-09-24 00:11:52.247] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:11:52.247] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:11:52.855] INIT: version 2.96 booting [2025-09-24 00:11:52.966] INIT: Entering runlevel: 5 [2025-09-24 00:11:53.111] mtd24 attached [2025-09-24 00:11:53.127] mtd28 attached [2025-09-24 00:11:53.158] ubi0:textures is mounted. [2025-09-24 00:11:53.158] mtd32 attached [2025-09-24 00:11:53.174] ubi1:animations is mounted. [2025-09-24 00:11:53.190] RTNETLINK answers: File exists [2025-09-24 00:11:53.251] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:11:53.251] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:11:53.251] ubi2:dml_code is mounted. [2025-09-24 00:11:53.251] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:11:53.251] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:11:53.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:11:53.251] data.LB_FadeInType0=100 [2025-09-24 00:11:53.251] data.CHLH_FadeInType0=0 [2025-09-24 00:11:53.251] data.WU_FadeInDelay=0 [2025-09-24 00:11:53.251] max_time_out=0 [2025-09-24 00:11:53.251] No splash screen [2025-09-24 00:11:53.251] stop dss Done [2025-09-24 00:11:53.267] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:11:53.283] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:11:53.325] /dev/mem opened. [2025-09-24 00:11:53.325] Memory mapped at address 0xffffb0373000. [2025-09-24 00:11:53.325] Read at address 0x00600018 (0xffffb0373018): 0x00000000 [2025-09-24 00:11:53.325] Write at address 0x00600018 (0xffffb0373018): 0x00400040, readback 0x00400040 [2025-09-24 00:11:53.501] Loaded PowerVR consumer services. [2025-09-24 00:11:53.565] Waiting data available... [2025-09-24 00:11:53.580] 512+0 records in [2025-09-24 00:11:53.580] 512+0 records out [2025-09-24 00:11:53.612] Starting syslogd/klogd: done [2025-09-24 00:11:53.644] DML Start [2025-09-24 00:11:53.805] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:11:54.028] DML res1: 0 [2025-09-24 00:11:54.532] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:11:54.532] Read Success [2025-09-24 00:11:54.532] Verifying certificate... [2025-09-24 00:11:54.756] Verified OK [2025-09-24 00:11:54.772] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:11:56.291] Verified OK [2025-09-24 00:11:56.291] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:11:56.943] Verified OK [2025-09-24 00:11:56.943] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:11:59.740] fs.protected_hardlinks = 1 [2025-09-24 00:11:59.740] fs.protected_symlinks = 1 [2025-09-24 00:11:59.756] kernel.modules_disabled = 1 [2025-09-24 00:11:59.933] [2025-09-24 00:11:59.933] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:12:01.131] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:12:08.915] SBL1:1210.0.1.0 [2025-09-24 00:12:08.947] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:12:10.530] SBL2:1210.0.1.0 [2025-09-24 00:12:10.562] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:12:10.673] j-A [2025-09-24 00:12:18.013] The R5 Autosar Classic is running [2025-09-24 00:12:18.044] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:12:18.044] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:12:18.652] INIT: version 2.96 booting [2025-09-24 00:12:18.764] INIT: Entering runlevel: 5 [2025-09-24 00:12:18.924] mtd32 attached [2025-09-24 00:12:18.924] mtd24 attached [2025-09-24 00:12:18.940] mtd28 attached [2025-09-24 00:12:18.988] ubi0:dml_code is mounted. [2025-09-24 00:12:18.988] RTNETLINK answers: File exists [2025-09-24 00:12:19.047] ubi2:animations is mounted. [2025-09-24 00:12:19.048] ubi1:textures is mounted. [2025-09-24 00:12:19.048] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:12:19.048] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:12:19.048] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:12:19.048] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:12:19.048] data.LB_FadeInType0=100 [2025-09-24 00:12:19.048] data.CHLH_FadeInType0=0 [2025-09-24 00:12:19.048] data.WU_FadeInDelay=0 [2025-09-24 00:12:19.048] max_time_out=0 [2025-09-24 00:12:19.048] No splash screen [2025-09-24 00:12:19.048] stop dss Done [2025-09-24 00:12:19.048] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:12:19.114] /dev/mem opened. [2025-09-24 00:12:19.114] Memory mapped at address 0xffff8045f000. [2025-09-24 00:12:19.114] Read at address 0x00600018 (0xffff8045f018): 0x00000000 [2025-09-24 00:12:19.114] Write at address 0x00600018 (0xffff8045f018): 0x00400040, readback 0x00400040 [2025-09-24 00:12:19.114] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:12:19.130] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:12:19.338] Loaded PowerVR consumer services. [2025-09-24 00:12:19.370] 512+0 records in [2025-09-24 00:12:19.386] 512+0 records out [2025-09-24 00:12:19.402] Waiting data available... [2025-09-24 00:12:19.417] Starting syslogd/klogd: done [2025-09-24 00:12:19.433] DML Start [2025-09-24 00:12:19.610] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:12:19.865] DML res1: 0 [2025-09-24 00:12:20.249] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:12:20.270] Read Success [2025-09-24 00:12:20.270] Verifying certificate... [2025-09-24 00:12:20.494] Verified OK [2025-09-24 00:12:20.510] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:12:22.070] Verified OK [2025-09-24 00:12:22.070] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:12:22.738] Verified OK [2025-09-24 00:12:22.738] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:12:25.423] fs.protected_hardlinks = 1 [2025-09-24 00:12:25.439] fs.protected_symlinks = 1 [2025-09-24 00:12:25.439] kernel.modules_disabled = 1 [2025-09-24 00:12:25.647] [2025-09-24 00:12:25.647] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:12:26.915] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:12:34.716] SBL1:1210.0.1.0 [2025-09-24 00:12:34.764] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:12:36.331] SBL2:1210.0.1.0 [2025-09-24 00:12:36.378] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:12:36.475] j-A [2025-09-24 00:12:43.831] The R5 Autosar Classic is running [2025-09-24 00:12:43.831] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:12:43.852] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:12:44.459] INIT: version 2.96 booting [2025-09-24 00:12:44.571] INIT: Entering runlevel: 5 [2025-09-24 00:12:44.731] mtd32 attached [2025-09-24 00:12:44.731] mtd24 attached [2025-09-24 00:12:44.747] mtd28 attached [2025-09-24 00:12:44.804] ubi0:dml_code is mounted. [2025-09-24 00:12:44.804] RTNETLINK answers: File exists [2025-09-24 00:12:44.804] ubi1:textures is mounted. [2025-09-24 00:12:44.804] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:12:44.855] ubi2:animations is mounted. [2025-09-24 00:12:44.855] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:12:44.855] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:12:44.855] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:12:44.855] data.LB_FadeInType0=100 [2025-09-24 00:12:44.855] data.CHLH_FadeInType0=0 [2025-09-24 00:12:44.855] data.WU_FadeInDelay=0 [2025-09-24 00:12:44.855] max_time_out=0 [2025-09-24 00:12:44.855] No splash screen [2025-09-24 00:12:44.855] stop dss Done [2025-09-24 00:12:44.855] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:12:44.929] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:12:44.929] /dev/mem opened. [2025-09-24 00:12:44.929] Memory mapped at address 0xffff9d768000. [2025-09-24 00:12:44.929] Read at address 0x00600018 (0xffff9d768018): 0x00000000 [2025-09-24 00:12:44.929] Write at address 0x00600018 (0xffff9d768018): 0x00400040, readback 0x00400040 [2025-09-24 00:12:44.929] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:12:45.121] Loaded PowerVR consumer services. [2025-09-24 00:12:45.210] 512+0 records in [2025-09-24 00:12:45.210] 512+0 records out [2025-09-24 00:12:45.210] Waiting data available... [2025-09-24 00:12:45.243] Starting syslogd/klogd: done [2025-09-24 00:12:45.259] DML Start [2025-09-24 00:12:45.451] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:12:45.659] DML res1: 0 [2025-09-24 00:12:46.134] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:12:46.134] Read Success [2025-09-24 00:12:46.134] Verifying certificate... [2025-09-24 00:12:46.357] Verified OK [2025-09-24 00:12:46.373] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:12:48.069] Verified OK [2025-09-24 00:12:48.069] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:12:48.612] Verified OK [2025-09-24 00:12:48.612] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:12:51.281] fs.protected_hardlinks = 1 [2025-09-24 00:12:51.297] fs.protected_symlinks = 1 [2025-09-24 00:12:51.297] kernel.modules_disabled = 1 [2025-09-24 00:12:51.490] [2025-09-24 00:12:51.490] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:12:52.767] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:13:00.517] SBL1:1210.0.1.0 [2025-09-24 00:13:00.549] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:13:02.132] SBL2:1210.0.1.0 [2025-09-24 00:13:02.164] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:13:02.277] j-A [2025-09-24 00:13:09.616] The R5 Autosar Classic is running [2025-09-24 00:13:09.641] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:13:09.641] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:13:10.249] INIT: version 2.96 booting [2025-09-24 00:13:10.362] INIT: Entering runlevel: 5 [2025-09-24 00:13:10.521] mtd28 attached [2025-09-24 00:13:10.521] mtd24 attached [2025-09-24 00:13:10.537] mtd32 attached [2025-09-24 00:13:10.585] ubi0:animations is mounted. [2025-09-24 00:13:10.585] RTNETLINK answers: File exists [2025-09-24 00:13:10.647] ubi1:textures is mounted. [2025-09-24 00:13:10.647] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:13:10.647] ubi2:dml_code is mounted. [2025-09-24 00:13:10.647] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:13:10.647] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:13:10.647] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:13:10.647] data.LB_FadeInType0=100 [2025-09-24 00:13:10.647] data.CHLH_FadeInType0=0 [2025-09-24 00:13:10.647] data.WU_FadeInDelay=0 [2025-09-24 00:13:10.647] max_time_out=0 [2025-09-24 00:13:10.647] No splash screen [2025-09-24 00:13:10.647] stop dss Done [2025-09-24 00:13:10.647] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:13:10.714] /dev/mem opened. [2025-09-24 00:13:10.714] Memory mapped at address 0xffff9dffa000. [2025-09-24 00:13:10.714] Read at address 0x00600018 (0xffff9dffa018): 0x00000000 [2025-09-24 00:13:10.714] Write at address 0x00600018 (0xffff9dffa018): 0x00400040, readback 0x00400040 [2025-09-24 00:13:10.746] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:13:10.746] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:13:10.826] Loaded PowerVR consumer services. [2025-09-24 00:13:10.980] 512+0 records in [2025-09-24 00:13:10.980] 512+0 records out [2025-09-24 00:13:10.980] Waiting data available... [2025-09-24 00:13:11.013] Starting syslogd/klogd: done [2025-09-24 00:13:11.029] DML Start [2025-09-24 00:13:11.253] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:13:11.492] DML res1: 0 [2025-09-24 00:13:11.842] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:13:11.842] Read Success [2025-09-24 00:13:11.842] Verifying certificate... [2025-09-24 00:13:12.098] Verified OK [2025-09-24 00:13:12.114] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:13:13.788] Verified OK [2025-09-24 00:13:13.788] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:13:14.412] Verified OK [2025-09-24 00:13:14.412] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:13:17.098] fs.protected_hardlinks = 1 [2025-09-24 00:13:17.114] fs.protected_symlinks = 1 [2025-09-24 00:13:17.114] kernel.modules_disabled = 1 [2025-09-24 00:13:17.305] [2025-09-24 00:13:17.305] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:13:18.564] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:13:26.317] SBL1:1210.0.1.0 [2025-09-24 00:13:26.365] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:13:27.948] SBL2:1210.0.1.0 [2025-09-24 00:13:27.980] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:13:28.091] j-A [2025-09-24 00:13:35.432] The R5 Autosar Classic is running [2025-09-24 00:13:35.457] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:13:35.457] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:13:36.064] INIT: version 2.96 booting [2025-09-24 00:13:36.176] INIT: Entering runlevel: 5 [2025-09-24 00:13:36.320] mtd24 attached [2025-09-24 00:13:36.352] mtd32 attached [2025-09-24 00:13:36.352] mtd28 attached [2025-09-24 00:13:36.384] ubi0:textures is mounted. [2025-09-24 00:13:36.400] RTNETLINK answers: File exists [2025-09-24 00:13:36.434] ubi1:dml_code is mounted. [2025-09-24 00:13:36.434] ubi2:animations is mounted. [2025-09-24 00:13:36.434] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:13:36.434] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:13:36.434] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:13:36.467] data.LB_FadeInType0=100 [2025-09-24 00:13:36.467] data.CHLH_FadeInType0=0 [2025-09-24 00:13:36.467] data.WU_FadeInDelay=0 [2025-09-24 00:13:36.467] max_time_out=0 [2025-09-24 00:13:36.467] No splash screen [2025-09-24 00:13:36.467] stop dss Done [2025-09-24 00:13:36.467] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:13:36.467] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:13:36.538] /dev/mem opened. [2025-09-24 00:13:36.538] Memory mapped at address 0xffff8d4d2000. [2025-09-24 00:13:36.538] Read at address 0x00600018 (0xffff8d4d2018): 0x00000000 [2025-09-24 00:13:36.538] Write at address 0x00600018 (0xffff8d4d2018): 0x00400040, readback 0x00400040 [2025-09-24 00:13:36.538] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:13:36.570] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:13:36.683] Loaded PowerVR consumer services. [2025-09-24 00:13:36.807] Waiting data available... [2025-09-24 00:13:36.807] 512+0 records in [2025-09-24 00:13:36.807] 512+0 records out [2025-09-24 00:13:36.823] Starting syslogd/klogd: done [2025-09-24 00:13:36.839] DML Start [2025-09-24 00:13:36.984] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:13:37.143] DML res1: 0 [2025-09-24 00:13:37.719] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:13:37.740] Read Success [2025-09-24 00:13:37.740] Verifying certificate... [2025-09-24 00:13:37.964] Verified OK [2025-09-24 00:13:37.980] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:13:39.638] Verified OK [2025-09-24 00:13:39.638] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:13:40.236] Verified OK [2025-09-24 00:13:40.236] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:13:42.810] fs.protected_hardlinks = 1 [2025-09-24 00:13:42.826] fs.protected_symlinks = 1 [2025-09-24 00:13:42.826] kernel.modules_disabled = 1 [2025-09-24 00:13:43.034] [2025-09-24 00:13:43.034] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:13:44.329] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:13:52.142] SBL1:1210.0.1.0 [2025-09-24 00:13:52.190] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:13:53.757] SBL2:1210.0.1.0 [2025-09-24 00:13:53.789] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:13:53.901] j-A [2025-09-24 00:14:01.256] The R5 Autosar Classic is running [2025-09-24 00:14:01.256] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:14:01.277] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:14:01.885] INIT: version 2.96 booting [2025-09-24 00:14:01.996] INIT: Entering runlevel: 5 [2025-09-24 00:14:02.156] mtd28 attached [2025-09-24 00:14:02.156] mtd24 attached [2025-09-24 00:14:02.172] mtd32 attached [2025-09-24 00:14:02.205] ubi0:animations is mounted. [2025-09-24 00:14:02.221] RTNETLINK answers: File exists [2025-09-24 00:14:02.281] ubi1:textures is mounted. [2025-09-24 00:14:02.281] ubi2:dml_code is mounted. [2025-09-24 00:14:02.281] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:14:02.281] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:14:02.281] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:14:02.281] data.LB_FadeInType0=100 [2025-09-24 00:14:02.281] data.CHLH_FadeInType0=0 [2025-09-24 00:14:02.281] data.WU_FadeInDelay=0 [2025-09-24 00:14:02.281] max_time_out=0 [2025-09-24 00:14:02.281] No splash screen [2025-09-24 00:14:02.281] stop dss Done [2025-09-24 00:14:02.281] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:14:02.281] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:14:02.349] /dev/mem opened. [2025-09-24 00:14:02.349] Memory mapped at address 0xffff9c6d1000. [2025-09-24 00:14:02.349] Read at address 0x00600018 (0xffff9c6d1018): 0x00000000 [2025-09-24 00:14:02.349] Write at address 0x00600018 (0xffff9c6d1018): 0x00400040, readback 0x00400040 [2025-09-24 00:14:02.365] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:14:02.381] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:14:02.573] Loaded PowerVR consumer services. [2025-09-24 00:14:02.605] Waiting data available... [2025-09-24 00:14:02.621] 512+0 records in [2025-09-24 00:14:02.621] 512+0 records out [2025-09-24 00:14:02.653] Starting syslogd/klogd: done [2025-09-24 00:14:02.685] DML Start [2025-09-24 00:14:02.861] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:14:03.069] DML res1: 0 [2025-09-24 00:14:03.576] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:14:03.576] Read Success [2025-09-24 00:14:03.576] Verifying certificate... [2025-09-24 00:14:03.831] Verified OK [2025-09-24 00:14:03.847] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:14:05.391] Verified OK [2025-09-24 00:14:05.391] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:14:05.967] Verified OK [2025-09-24 00:14:05.967] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:14:08.622] fs.protected_hardlinks = 1 [2025-09-24 00:14:08.638] fs.protected_symlinks = 1 [2025-09-24 00:14:08.653] kernel.modules_disabled = 1 [2025-09-24 00:14:08.830] [2025-09-24 00:14:08.830] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:14:10.201] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:14:17.936] SBL1:1210.0.1.0 [2025-09-24 00:14:17.983] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:14:19.550] SBL2:1210.0.1.0 [2025-09-24 00:14:19.598] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:14:19.694] j-A [2025-09-24 00:14:27.050] The R5 Autosar Classic is running [2025-09-24 00:14:27.073] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:14:27.073] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:14:27.680] INIT: version 2.96 booting [2025-09-24 00:14:27.792] INIT: Entering runlevel: 5 [2025-09-24 00:14:27.951] mtd24 attached [2025-09-24 00:14:27.951] mtd28 attached [2025-09-24 00:14:27.967] mtd32 attached [2025-09-24 00:14:28.016] ubi0:textures is mounted. [2025-09-24 00:14:28.081] RTNETLINK answers: File exists [2025-09-24 00:14:28.081] ubi1:animations is mounted. [2025-09-24 00:14:28.081] ubi2:dml_code is mounted. [2025-09-24 00:14:28.081] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:14:28.081] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:14:28.081] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:14:28.081] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:14:28.081] data.LB_FadeInType0=100 [2025-09-24 00:14:28.081] data.CHLH_FadeInType0=0 [2025-09-24 00:14:28.081] data.WU_FadeInDelay=0 [2025-09-24 00:14:28.081] max_time_out=0 [2025-09-24 00:14:28.081] No splash screen [2025-09-24 00:14:28.081] stop dss Done [2025-09-24 00:14:28.081] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:14:28.170] /dev/mem opened. [2025-09-24 00:14:28.170] Memory mapped at address 0xffffbf2ac000. [2025-09-24 00:14:28.170] Read at address 0x00600018 (0xffffbf2ac018): 0x00000000 [2025-09-24 00:14:28.170] Write at address 0x00600018 (0xffffbf2ac018): 0x00400040, readback 0x00400040 [2025-09-24 00:14:28.170] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:14:28.186] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:14:28.299] Loaded PowerVR consumer services. [2025-09-24 00:14:28.394] 512+0 records in [2025-09-24 00:14:28.394] 512+0 records out [2025-09-24 00:14:28.426] Starting syslogd/klogd: Waiting data available... [2025-09-24 00:14:28.426] done [2025-09-24 00:14:28.443] DML Start [2025-09-24 00:14:28.602] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:14:28.794] DML res1: 0 [2025-09-24 00:14:29.338] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:14:29.354] Read Success [2025-09-24 00:14:29.354] Verifying certificate... [2025-09-24 00:14:29.625] Verified OK [2025-09-24 00:14:29.641] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:14:31.270] Verified OK [2025-09-24 00:14:31.270] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:14:31.920] Verified OK [2025-09-24 00:14:31.920] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:14:34.526] fs.protected_hardlinks = 1 [2025-09-24 00:14:34.526] fs.protected_symlinks = 1 [2025-09-24 00:14:34.543] kernel.modules_disabled = 1 [2025-09-24 00:14:34.751] [2025-09-24 00:14:34.751] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:14:35.917] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:14:43.764] SBL1:1210.0.1.0 [2025-09-24 00:14:43.812] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:14:45.378] SBL2:1210.0.1.0 [2025-09-24 00:14:45.410] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:14:45.523] j-A [2025-09-24 00:14:52.876] The R5 Autosar Classic is running [2025-09-24 00:14:52.876] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:14:52.897] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:14:53.505] INIT: version 2.96 booting [2025-09-24 00:14:53.617] INIT: Entering runlevel: 5 [2025-09-24 00:14:53.760] mtd28 attached [2025-09-24 00:14:53.777] mtd24 attached [2025-09-24 00:14:53.793] mtd32 attached [2025-09-24 00:14:53.809] ubi0:animations is mounted. [2025-09-24 00:14:53.841] ubi1:textures is mounted. [2025-09-24 00:14:53.841] RTNETLINK answers: File exists [2025-09-24 00:14:53.899] ubi2:dml_code is mounted. [2025-09-24 00:14:53.899] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:14:53.899] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:14:53.899] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:14:53.899] data.LB_FadeInType0=100 [2025-09-24 00:14:53.899] data.CHLH_FadeInType0=0 [2025-09-24 00:14:53.899] data.WU_FadeInDelay=0 [2025-09-24 00:14:53.899] max_time_out=0 [2025-09-24 00:14:53.899] No splash screen [2025-09-24 00:14:53.899] stop dss Done [2025-09-24 00:14:53.899] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:14:53.899] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:14:53.971] /dev/mem opened. [2025-09-24 00:14:53.971] Memory mapped at address 0xffff8ddc2000. [2025-09-24 00:14:53.971] Read at address 0x00600018 (0xffff8ddc2018): 0x00000000 [2025-09-24 00:14:53.971] Write at address 0x00600018 (0xffff8ddc2018): 0x00400040, readback 0x00400040 [2025-09-24 00:14:53.987] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:14:54.003] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:14:54.179] Loaded PowerVR consumer services. [2025-09-24 00:14:54.212] Waiting data available... [2025-09-24 00:14:54.227] 512+0 records in [2025-09-24 00:14:54.227] 512+0 records out [2025-09-24 00:14:54.275] Starting syslogd/klogd: done [2025-09-24 00:14:54.291] DML Start [2025-09-24 00:14:54.468] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:14:54.707] DML res1: 0 [2025-09-24 00:14:55.202] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:14:55.202] Read Success [2025-09-24 00:14:55.202] Verifying certificate... [2025-09-24 00:14:55.490] Verified OK [2025-09-24 00:14:55.506] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:14:57.262] Verified OK [2025-09-24 00:14:57.262] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:14:57.893] Verified OK [2025-09-24 00:14:57.893] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:15:00.436] fs.protected_hardlinks = 1 [2025-09-24 00:15:00.436] fs.protected_symlinks = 1 [2025-09-24 00:15:00.452] kernel.modules_disabled = 1 [2025-09-24 00:15:00.643] [2025-09-24 00:15:00.643] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:15:01.748] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:15:09.573] SBL1:1210.0.1.0 [2025-09-24 00:15:09.621] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:15:11.188] SBL2:1210.0.1.0 [2025-09-24 00:15:11.236] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:15:11.332] j-A [2025-09-24 00:15:18.686] The R5 Autosar Classic is running [2025-09-24 00:15:18.707] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:15:18.707] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:15:19.315] INIT: version 2.96 booting [2025-09-24 00:15:19.427] INIT: Entering runlevel: 5 [2025-09-24 00:15:19.587] mtd24 attached [2025-09-24 00:15:19.587] mtd28 attached [2025-09-24 00:15:19.603] mtd32 attached [2025-09-24 00:15:19.650] ubi0:textures is mounted. [2025-09-24 00:15:19.711] RTNETLINK answers: File exists [2025-09-24 00:15:19.711] ubi2:dml_code is mounted. [2025-09-24 00:15:19.711] ubi1:animations is mounted. [2025-09-24 00:15:19.711] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:15:19.711] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:15:19.711] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:15:19.711] data.LB_FadeInType0=100 [2025-09-24 00:15:19.711] data.CHLH_FadeInType0=0 [2025-09-24 00:15:19.711] data.WU_FadeInDelay=0 [2025-09-24 00:15:19.711] max_time_out=0 [2025-09-24 00:15:19.711] No splash screen [2025-09-24 00:15:19.711] stop dss Done [2025-09-24 00:15:19.711] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:15:19.711] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:15:19.759] /dev/mem opened. [2025-09-24 00:15:19.785] Memory mapped at address 0xffffb0973000. [2025-09-24 00:15:19.785] Read at address 0x00600018 (0xffffb0973018): 0x00000000 [2025-09-24 00:15:19.785] Write at address 0x00600018 (0xffffb0973018): 0x00400040, readback 0x00400040 [2025-09-24 00:15:19.801] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:15:19.801] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:15:19.993] Loaded PowerVR consumer services. [2025-09-24 00:15:20.041] 512+0 records in [2025-09-24 00:15:20.041] 512+0 records out [2025-09-24 00:15:20.073] Waiting data available... [2025-09-24 00:15:20.073] Starting syslogd/klogd: done [2025-09-24 00:15:20.089] DML Start [2025-09-24 00:15:20.265] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:15:20.489] DML res1: 0 [2025-09-24 00:15:20.950] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:15:20.950] Read Success [2025-09-24 00:15:20.950] Verifying certificate... [2025-09-24 00:15:21.189] Verified OK [2025-09-24 00:15:21.205] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:15:22.852] Verified OK [2025-09-24 00:15:22.873] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:15:23.477] Verified OK [2025-09-24 00:15:23.477] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:15:26.100] fs.protected_hardlinks = 1 [2025-09-24 00:15:26.116] fs.protected_symlinks = 1 [2025-09-24 00:15:26.116] kernel.modules_disabled = 1 [2025-09-24 00:15:26.308] [2025-09-24 00:15:26.308] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:15:27.539] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:15:35.408] SBL1:1210.0.1.0 [2025-09-24 00:15:35.456] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:15:37.023] SBL2:1210.0.1.0 [2025-09-24 00:15:37.055] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:15:37.167] j-A [2025-09-24 00:15:44.541] The R5 Autosar Classic is running [2025-09-24 00:15:44.541] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:15:44.541] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:15:45.148] INIT: version 2.96 booting [2025-09-24 00:15:45.261] INIT: Entering runlevel: 5 [2025-09-24 00:15:45.404] mtd28 attached [2025-09-24 00:15:45.420] mtd24 attached [2025-09-24 00:15:45.436] mtd32 attached [2025-09-24 00:15:45.515] RTNETLINK answers: File exists [2025-09-24 00:15:45.515] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:15:45.515] ubi0:animations is mounted. [2025-09-24 00:15:45.515] ubi2:dml_code is mounted. [2025-09-24 00:15:45.515] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:15:45.515] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:15:45.515] ubi1:textures is mounted. [2025-09-24 00:15:45.515] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:15:45.515] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:15:45.544] data.LB_FadeInType0=100 [2025-09-24 00:15:45.544] data.CHLH_FadeInType0=0 [2025-09-24 00:15:45.544] data.WU_FadeInDelay=0 [2025-09-24 00:15:45.544] max_time_out=0 [2025-09-24 00:15:45.544] No splash screen [2025-09-24 00:15:45.544] stop dss Done [2025-09-24 00:15:45.593] /dev/mem opened. [2025-09-24 00:15:45.593] Memory mapped at address 0xffff9e951000. [2025-09-24 00:15:45.630] Read at address 0x00600018 (0xffff9e951018): 0x00000000 [2025-09-24 00:15:45.630] Write at address 0x00600018 (0xffff9e951018): 0x00400040, readback 0x00400040 [2025-09-24 00:15:45.630] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:15:45.630] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:15:45.725] Loaded PowerVR consumer services. [2025-09-24 00:15:45.853] 512+0 records in [2025-09-24 00:15:45.869] 512+0 records out [2025-09-24 00:15:45.869] Waiting data available... [2025-09-24 00:15:45.901] Starting syslogd/klogd: done [2025-09-24 00:15:45.917] DML Start [2025-09-24 00:15:46.108] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:15:46.301] DML res1: 0 [2025-09-24 00:15:46.727] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:15:46.727] Read Success [2025-09-24 00:15:46.727] Verifying certificate... [2025-09-24 00:15:46.982] Verified OK [2025-09-24 00:15:46.998] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:15:48.661] Verified OK [2025-09-24 00:15:48.661] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:15:49.327] Verified OK [2025-09-24 00:15:49.327] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:15:51.965] fs.protected_hardlinks = 1 [2025-09-24 00:15:51.965] fs.protected_symlinks = 1 [2025-09-24 00:15:51.981] kernel.modules_disabled = 1 [2025-09-24 00:15:52.172] [2025-09-24 00:15:52.172] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:15:53.420] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:16:01.213] SBL1:1210.0.1.0 [2025-09-24 00:16:01.245] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:16:02.828] SBL2:1210.0.1.0 [2025-09-24 00:16:02.859] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:16:02.971] j-A [2025-09-24 00:16:10.309] The R5 Autosar Classic is running [2025-09-24 00:16:10.340] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:16:10.340] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:16:10.948] INIT: version 2.96 booting [2025-09-24 00:16:11.060] INIT: Entering runlevel: 5 [2025-09-24 00:16:11.220] mtd24 attached [2025-09-24 00:16:11.220] mtd28 attached [2025-09-24 00:16:11.236] mtd32 attached [2025-09-24 00:16:11.284] RTNETLINK answers: File exists [2025-09-24 00:16:11.345] ubi0:textures is mounted. [2025-09-24 00:16:11.345] ubi1:animations is mounted. [2025-09-24 00:16:11.345] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:16:11.345] ubi2:dml_code is mounted. [2025-09-24 00:16:11.345] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:16:11.345] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:16:11.345] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:16:11.345] data.LB_FadeInType0=100 [2025-09-24 00:16:11.345] data.CHLH_FadeInType0=0 [2025-09-24 00:16:11.345] data.WU_FadeInDelay=0 [2025-09-24 00:16:11.345] max_time_out=0 [2025-09-24 00:16:11.345] No splash screen [2025-09-24 00:16:11.345] stop dss Done [2025-09-24 00:16:11.345] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:16:11.376] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:16:11.415] /dev/mem opened. [2025-09-24 00:16:11.415] Memory mapped at address 0xffffad420000. [2025-09-24 00:16:11.415] Read at address 0x00600018 (0xffffad420018): 0x00000000 [2025-09-24 00:16:11.415] Write at address 0x00600018 (0xffffad420018): 0x00400040, readback 0x00400040 [2025-09-24 00:16:11.415] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:16:11.544] Loaded PowerVR consumer services. [2025-09-24 00:16:11.656] Waiting data available... [2025-09-24 00:16:11.688] 512+0 records in [2025-09-24 00:16:11.688] 512+0 records out [2025-09-24 00:16:11.704] Starting syslogd/klogd: done [2025-09-24 00:16:11.720] DML Start [2025-09-24 00:16:11.896] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:16:12.120] DML res1: 0 [2025-09-24 00:16:12.590] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:16:12.590] Read Success [2025-09-24 00:16:12.590] Verifying certificate... [2025-09-24 00:16:12.813] Verified OK [2025-09-24 00:16:12.829] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:16:14.644] Verified OK [2025-09-24 00:16:14.644] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:16:15.195] Verified OK [2025-09-24 00:16:15.195] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:16:17.656] fs.protected_hardlinks = 1 [2025-09-24 00:16:17.656] fs.protected_symlinks = 1 [2025-09-24 00:16:17.673] kernel.modules_disabled = 1 [2025-09-24 00:16:17.864] [2025-09-24 00:16:17.864] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:16:19.220] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:16:27.005] SBL1:1210.0.1.0 [2025-09-24 00:16:27.037] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:16:28.619] SBL2:1210.0.1.0 [2025-09-24 00:16:28.651] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:16:28.764] j-A [2025-09-24 00:16:36.135] The R5 Autosar Classic is running [2025-09-24 00:16:36.135] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:16:36.135] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:16:36.742] INIT: version 2.96 booting [2025-09-24 00:16:36.854] INIT: Entering runlevel: 5 [2025-09-24 00:16:37.014] mtd32 attached [2025-09-24 00:16:37.030] mtd28 attached [2025-09-24 00:16:37.030] mtd24 attached [2025-09-24 00:16:37.078] RTNETLINK answers: File exists [2025-09-24 00:16:37.145] ubi0:dml_code is mounted. [2025-09-24 00:16:37.145] ubi1:animations is mounted. [2025-09-24 00:16:37.145] ubi2:textures is mounted. [2025-09-24 00:16:37.145] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:16:37.145] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:16:37.145] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:16:37.145] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:16:37.145] data.LB_FadeInType0=100 [2025-09-24 00:16:37.145] data.CHLH_FadeInType0=0 [2025-09-24 00:16:37.145] data.WU_FadeInDelay=0 [2025-09-24 00:16:37.145] max_time_out=0 [2025-09-24 00:16:37.145] No splash screen [2025-09-24 00:16:37.145] stop dss Done [2025-09-24 00:16:37.145] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:16:37.219] /dev/mem opened. [2025-09-24 00:16:37.219] Memory mapped at address 0xffff9ab0e000. [2025-09-24 00:16:37.219] Read at address 0x00600018 (0xffff9ab0e018): 0x00000000 [2025-09-24 00:16:37.219] Write at address 0x00600018 (0xffff9ab0e018): 0x00400040, readback 0x00400040 [2025-09-24 00:16:37.267] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:16:37.283] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:16:37.442] Loaded PowerVR consumer services. [2025-09-24 00:16:37.475] Waiting data available... [2025-09-24 00:16:37.491] 512+0 records in [2025-09-24 00:16:37.491] 512+0 records out [2025-09-24 00:16:37.523] Starting syslogd/klogd: done [2025-09-24 00:16:37.539] DML Start [2025-09-24 00:16:37.698] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:16:37.922] DML res1: 0 [2025-09-24 00:16:38.447] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:16:38.447] Read Success [2025-09-24 00:16:38.447] Verifying certificate... [2025-09-24 00:16:38.702] Verified OK [2025-09-24 00:16:38.702] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:16:40.379] Verified OK [2025-09-24 00:16:40.379] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:16:41.003] Verified OK [2025-09-24 00:16:41.003] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:16:43.625] fs.protected_hardlinks = 1 [2025-09-24 00:16:43.640] fs.protected_symlinks = 1 [2025-09-24 00:16:43.640] kernel.modules_disabled = 1 [2025-09-24 00:16:43.832] [2025-09-24 00:16:43.832] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:16:45.031] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:16:52.795] SBL1:1210.0.1.0 [2025-09-24 00:16:52.843] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:16:54.410] SBL2:1210.0.1.0 [2025-09-24 00:16:54.458] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:16:54.553] j-A [2025-09-24 00:17:01.910] The R5 Autosar Classic is running [2025-09-24 00:17:01.933] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:17:01.933] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:17:02.540] INIT: version 2.96 booting [2025-09-24 00:17:02.652] INIT: Entering runlevel: 5 [2025-09-24 00:17:02.795] mtd24 attached [2025-09-24 00:17:02.812] mtd32 attached [2025-09-24 00:17:02.812] mtd28 attached [2025-09-24 00:17:02.860] ubi0:textures is mounted. [2025-09-24 00:17:02.929] RTNETLINK answers: File exists [2025-09-24 00:17:02.929] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:17:02.929] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:17:02.929] ubi1:dml_code is mounted. [2025-09-24 00:17:02.929] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:17:02.929] ubi2:animations is mounted. [2025-09-24 00:17:02.929] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:17:02.929] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:17:02.929] data.LB_FadeInType0=100 [2025-09-24 00:17:02.929] data.CHLH_FadeInType0=0 [2025-09-24 00:17:02.929] data.WU_FadeInDelay=0 [2025-09-24 00:17:02.929] max_time_out=0 [2025-09-24 00:17:02.929] No splash screen [2025-09-24 00:17:02.929] stop dss Done [2025-09-24 00:17:02.960] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:17:02.976] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:17:03.012] /dev/mem opened. [2025-09-24 00:17:03.012] Memory mapped at address 0xffff99365000. [2025-09-24 00:17:03.012] Read at address 0x00600018 (0xffff99365018): 0x00000000 [2025-09-24 00:17:03.012] Write at address 0x00600018 (0xffff99365018): 0x00400040, readback 0x00400040 [2025-09-24 00:17:03.076] Loaded PowerVR consumer services. [2025-09-24 00:17:03.236] Waiting data available... [2025-09-24 00:17:03.253] 512+0 records in [2025-09-24 00:17:03.253] 512+0 records out [2025-09-24 00:17:03.300] Starting syslogd/klogd: done [2025-09-24 00:17:03.316] DML Start [2025-09-24 00:17:03.508] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:17:03.732] DML res1: 0 [2025-09-24 00:17:04.177] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:17:04.177] Read Success [2025-09-24 00:17:04.177] Verifying certificate... [2025-09-24 00:17:04.465] Verified OK [2025-09-24 00:17:04.481] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:17:06.287] Verified OK [2025-09-24 00:17:06.287] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:17:06.889] Verified OK [2025-09-24 00:17:06.889] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:17:09.431] fs.protected_hardlinks = 1 [2025-09-24 00:17:09.431] fs.protected_symlinks = 1 [2025-09-24 00:17:09.446] kernel.modules_disabled = 1 [2025-09-24 00:17:09.638] [2025-09-24 00:17:09.638] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:17:10.828] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:17:18.589] SBL1:1210.0.1.0 [2025-09-24 00:17:18.621] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:17:20.204] SBL2:1210.0.1.0 [2025-09-24 00:17:20.235] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:17:20.347] j-A [2025-09-24 00:17:27.688] The R5 Autosar Classic is running [2025-09-24 00:17:27.713] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:17:27.713] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:17:28.320] INIT: version 2.96 booting [2025-09-24 00:17:28.431] INIT: Entering runlevel: 5 [2025-09-24 00:17:28.592] mtd32 attached [2025-09-24 00:17:28.592] mtd28 attached [2025-09-24 00:17:28.608] mtd24 attached [2025-09-24 00:17:28.656] ubi0:dml_code is mounted. [2025-09-24 00:17:28.656] RTNETLINK answers: File exists [2025-09-24 00:17:28.710] ubi2:textures is mounted. [2025-09-24 00:17:28.710] ubi1:animations is mounted. [2025-09-24 00:17:28.710] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:17:28.710] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:17:28.710] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:17:28.710] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:17:28.710] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:17:28.710] data.LB_FadeInType0=100 [2025-09-24 00:17:28.710] data.CHLH_FadeInType0=0 [2025-09-24 00:17:28.710] data.WU_FadeInDelay=0 [2025-09-24 00:17:28.710] max_time_out=0 [2025-09-24 00:17:28.710] No splash screen [2025-09-24 00:17:28.710] stop dss Done [2025-09-24 00:17:28.750] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:17:28.750] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:17:28.766] /dev/mem opened. [2025-09-24 00:17:28.766] Memory mapped at address 0xffff8cc45000. [2025-09-24 00:17:28.792] Read at address 0x00600018 (0xffff8cc45018): 0x00000000 [2025-09-24 00:17:28.792] Write at address 0x00600018 (0xffff8cc45018): 0x00400040, readback 0x00400040 [2025-09-24 00:17:28.968] Loaded PowerVR consumer services. [2025-09-24 00:17:29.033] Waiting data available... [2025-09-24 00:17:29.049] 512+0 records in [2025-09-24 00:17:29.049] 512+0 records out [2025-09-24 00:17:29.096] Starting syslogd/klogd: done [2025-09-24 00:17:29.113] DML Start [2025-09-24 00:17:29.272] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:17:29.480] DML res1: 0 [2025-09-24 00:17:30.028] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:17:30.028] Read Success [2025-09-24 00:17:30.028] Verifying certificate... [2025-09-24 00:17:30.236] Verified OK [2025-09-24 00:17:30.252] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:17:31.913] Verified OK [2025-09-24 00:17:31.913] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:17:32.502] Verified OK [2025-09-24 00:17:32.502] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:17:35.203] fs.protected_hardlinks = 1 [2025-09-24 00:17:35.219] fs.protected_symlinks = 1 [2025-09-24 00:17:35.219] kernel.modules_disabled = 1 [2025-09-24 00:17:35.411] [2025-09-24 00:17:35.411] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:17:36.622] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:17:44.394] SBL1:1210.0.1.0 [2025-09-24 00:17:44.442] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:17:46.009] SBL2:1210.0.1.0 [2025-09-24 00:17:46.057] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:17:46.152] j-A [2025-09-24 00:17:53.508] The R5 Autosar Classic is running [2025-09-24 00:17:53.531] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:17:53.531] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:17:54.139] INIT: version 2.96 booting [2025-09-24 00:17:54.250] INIT: Entering runlevel: 5 [2025-09-24 00:17:54.394] mtd28 attached [2025-09-24 00:17:54.410] mtd24 attached [2025-09-24 00:17:54.426] mtd32 attached [2025-09-24 00:17:54.474] RTNETLINK answers: File exists [2025-09-24 00:17:54.474] ubi0:animations is mounted. [2025-09-24 00:17:54.513] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:17:54.513] ubi1:textures is mounted. [2025-09-24 00:17:54.513] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:17:54.513] ubi2:dml_code is mounted. [2025-09-24 00:17:54.513] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:17:54.513] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:17:54.513] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:17:54.536] data.LB_FadeInType0=100 [2025-09-24 00:17:54.536] data.CHLH_FadeInType0=0 [2025-09-24 00:17:54.536] data.WU_FadeInDelay=0 [2025-09-24 00:17:54.536] max_time_out=0 [2025-09-24 00:17:54.536] No splash screen [2025-09-24 00:17:54.536] stop dss Done [2025-09-24 00:17:54.583] /dev/mem opened. [2025-09-24 00:17:54.583] Memory mapped at address 0xffffa1ed7000. [2025-09-24 00:17:54.616] Read at address 0x00600018 (0xffffa1ed7018): 0x00000000 [2025-09-24 00:17:54.616] Write at address 0x00600018 (0xffffa1ed7018): 0x00400040, readback 0x00400040 [2025-09-24 00:17:54.616] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:17:54.616] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:17:54.712] Loaded PowerVR consumer services. [2025-09-24 00:17:54.866] Waiting data available... [2025-09-24 00:17:54.866] 512+0 records in [2025-09-24 00:17:54.866] 512+0 records out [2025-09-24 00:17:54.897] Starting syslogd/klogd: done [2025-09-24 00:17:54.913] DML Start [2025-09-24 00:17:55.090] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:17:55.329] DML res1: 0 [2025-09-24 00:17:55.729] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:17:55.746] Read Success [2025-09-24 00:17:55.746] Verifying certificate... [2025-09-24 00:17:56.002] Verified OK [2025-09-24 00:17:56.017] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:17:57.608] Verified OK [2025-09-24 00:17:57.608] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:17:58.286] Verified OK [2025-09-24 00:17:58.286] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:18:00.940] fs.protected_hardlinks = 1 [2025-09-24 00:18:00.956] fs.protected_symlinks = 1 [2025-09-24 00:18:00.956] kernel.modules_disabled = 1 [2025-09-24 00:18:01.147] [2025-09-24 00:18:01.147] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:18:02.403] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:18:10.195] SBL1:1210.0.1.0 [2025-09-24 00:18:10.243] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:18:11.810] SBL2:1210.0.1.0 [2025-09-24 00:18:11.858] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:18:11.953] j-A [2025-09-24 00:18:19.309] The R5 Autosar Classic is running [2025-09-24 00:18:19.332] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:18:19.332] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:18:19.939] INIT: version 2.96 booting [2025-09-24 00:18:20.052] INIT: Entering runlevel: 5 [2025-09-24 00:18:20.211] mtd28 attached [2025-09-24 00:18:20.211] mtd24 attached [2025-09-24 00:18:20.227] mtd32 attached [2025-09-24 00:18:20.275] RTNETLINK answers: File exists [2025-09-24 00:18:20.275] ubi0:animations is mounted. [2025-09-24 00:18:20.332] ubi1:textures is mounted. [2025-09-24 00:18:20.332] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:18:20.332] ubi2:dml_code is mounted. [2025-09-24 00:18:20.332] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:18:20.332] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:18:20.332] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:18:20.332] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:18:20.332] data.LB_FadeInType0=100 [2025-09-24 00:18:20.332] data.CHLH_FadeInType0=0 [2025-09-24 00:18:20.332] data.WU_FadeInDelay=0 [2025-09-24 00:18:20.332] max_time_out=0 [2025-09-24 00:18:20.332] No splash screen [2025-09-24 00:18:20.332] stop dss Done [2025-09-24 00:18:20.365] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:18:20.381] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:18:20.416] /dev/mem opened. [2025-09-24 00:18:20.416] Memory mapped at address 0xffff9a66f000. [2025-09-24 00:18:20.416] Read at address 0x00600018 (0xffff9a66f018): 0x00000000 [2025-09-24 00:18:20.416] Write at address 0x00600018 (0xffff9a66f018): 0x00400040, readback 0x00400040 [2025-09-24 00:18:20.512] Loaded PowerVR consumer services. [2025-09-24 00:18:20.671] Waiting data available... [2025-09-24 00:18:20.671] 512+0 records in [2025-09-24 00:18:20.671] 512+0 records out [2025-09-24 00:18:20.703] Starting syslogd/klogd: done [2025-09-24 00:18:20.719] DML Start [2025-09-24 00:18:20.911] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:18:21.135] DML res1: 0 [2025-09-24 00:18:21.486] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:18:21.507] Read Success [2025-09-24 00:18:21.507] Verifying certificate... [2025-09-24 00:18:21.763] Verified OK [2025-09-24 00:18:21.779] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:18:23.533] Verified OK [2025-09-24 00:18:23.533] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:18:24.125] Verified OK [2025-09-24 00:18:24.125] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:18:26.763] fs.protected_hardlinks = 1 [2025-09-24 00:18:26.779] fs.protected_symlinks = 1 [2025-09-24 00:18:26.779] kernel.modules_disabled = 1 [2025-09-24 00:18:26.971] [2025-09-24 00:18:26.971] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:18:28.214] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:18:36.013] SBL1:1210.0.1.0 [2025-09-24 00:18:36.045] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:18:37.628] SBL2:1210.0.1.0 [2025-09-24 00:18:37.660] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:18:37.772] j-A [2025-09-24 00:18:45.142] The R5 Autosar Classic is running [2025-09-24 00:18:45.142] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:18:45.142] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:18:45.765] INIT: version 2.96 booting [2025-09-24 00:18:45.877] INIT: Entering runlevel: 5 [2025-09-24 00:18:46.038] mtd32 attached [2025-09-24 00:18:46.038] mtd24 attached [2025-09-24 00:18:46.053] mtd28 attached [2025-09-24 00:18:46.086] ubi0:dml_code is mounted. [2025-09-24 00:18:46.102] RTNETLINK answers: File exists [2025-09-24 00:18:46.137] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:18:46.137] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:18:46.137] ubi1:textures is mounted. [2025-09-24 00:18:46.137] ubi2:animations is mounted. [2025-09-24 00:18:46.137] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:18:46.137] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:18:46.137] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:18:46.158] data.LB_FadeInType0=100 [2025-09-24 00:18:46.158] data.CHLH_FadeInType0=0 [2025-09-24 00:18:46.158] data.WU_FadeInDelay=0 [2025-09-24 00:18:46.158] max_time_out=0 [2025-09-24 00:18:46.158] No splash screen [2025-09-24 00:18:46.158] stop dss Done [2025-09-24 00:18:46.198] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:18:46.198] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:18:46.236] /dev/mem opened. [2025-09-24 00:18:46.236] Memory mapped at address 0xffffa3e5e000. [2025-09-24 00:18:46.236] Read at address 0x00600018 (0xffffa3e5e018): 0x00000000 [2025-09-24 00:18:46.236] Write at address 0x00600018 (0xffffa3e5e018): 0x00400040, readback 0x00400040 [2025-09-24 00:18:46.412] Loaded PowerVR consumer services. [2025-09-24 00:18:46.476] Waiting data available... [2025-09-24 00:18:46.498] 512+0 records in [2025-09-24 00:18:46.498] 512+0 records out [2025-09-24 00:18:46.530] Starting syslogd/klogd: done [2025-09-24 00:18:46.546] DML Start [2025-09-24 00:18:46.738] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:18:46.978] DML res1: 0 [2025-09-24 00:18:47.384] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:18:47.384] Read Success [2025-09-24 00:18:47.384] Verifying certificate... [2025-09-24 00:18:47.640] Verified OK [2025-09-24 00:18:47.656] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:18:49.350] Verified OK [2025-09-24 00:18:49.350] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:18:49.987] Verified OK [2025-09-24 00:18:49.987] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:18:52.626] fs.protected_hardlinks = 1 [2025-09-24 00:18:52.641] fs.protected_symlinks = 1 [2025-09-24 00:18:52.641] kernel.modules_disabled = 1 [2025-09-24 00:18:52.817] [2025-09-24 00:18:52.817] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:18:54.041] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:19:01.813] SBL1:1210.0.1.0 [2025-09-24 00:19:01.860] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:19:03.427] SBL2:1210.0.1.0 [2025-09-24 00:19:03.474] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:19:03.571] j-A [2025-09-24 00:19:10.925] The R5 Autosar Classic is running [2025-09-24 00:19:10.948] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:19:10.948] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:19:11.555] INIT: version 2.96 booting [2025-09-24 00:19:11.667] INIT: Entering runlevel: 5 [2025-09-24 00:19:11.811] mtd24 attached [2025-09-24 00:19:11.827] mtd32 attached [2025-09-24 00:19:11.842] mtd28 attached [2025-09-24 00:19:11.874] RTNETLINK answers: File exists [2025-09-24 00:19:11.925] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:19:11.925] ubi0:textures is mounted. [2025-09-24 00:19:11.925] ubi1:dml_code is mounted. [2025-09-24 00:19:11.925] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:19:11.925] ubi2:animations is mounted. [2025-09-24 00:19:11.925] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:19:11.925] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:19:11.925] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:19:11.950] data.LB_FadeInType0=100 [2025-09-24 00:19:11.950] data.CHLH_FadeInType0=0 [2025-09-24 00:19:11.950] data.WU_FadeInDelay=0 [2025-09-24 00:19:11.950] max_time_out=0 [2025-09-24 00:19:11.950] No splash screen [2025-09-24 00:19:11.950] stop dss Done [2025-09-24 00:19:11.982] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:19:11.982] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:19:12.018] /dev/mem opened. [2025-09-24 00:19:12.018] Memory mapped at address 0xffffa6444000. [2025-09-24 00:19:12.018] Read at address 0x00600018 (0xffffa6444018): 0x00000000 [2025-09-24 00:19:12.018] Write at address 0x00600018 (0xffffa6444018): 0x00400040, readback 0x00400040 [2025-09-24 00:19:12.242] Loaded PowerVR consumer services. [2025-09-24 00:19:12.302] 512+0 records in [2025-09-24 00:19:12.302] 512+0 records out [2025-09-24 00:19:12.302] Waiting data available... [2025-09-24 00:19:12.334] Starting syslogd/klogd: done [2025-09-24 00:19:12.349] DML Start [2025-09-24 00:19:12.525] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:19:12.781] DML res1: 0 [2025-09-24 00:19:13.127] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:19:13.127] Read Success [2025-09-24 00:19:13.127] Verifying certificate... [2025-09-24 00:19:13.382] Verified OK [2025-09-24 00:19:13.398] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:19:15.072] Verified OK [2025-09-24 00:19:15.072] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:19:15.643] Verified OK [2025-09-24 00:19:15.643] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:19:18.234] fs.protected_hardlinks = 1 [2025-09-24 00:19:18.250] fs.protected_symlinks = 1 [2025-09-24 00:19:18.250] kernel.modules_disabled = 1 [2025-09-24 00:19:18.442] [2025-09-24 00:19:18.442] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:19:19.879] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:19:27.629] SBL1:1210.0.1.0 [2025-09-24 00:19:27.661] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:19:29.244] SBL2:1210.0.1.0 [2025-09-24 00:19:29.275] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:19:29.387] j-A [2025-09-24 00:19:36.761] The R5 Autosar Classic is running [2025-09-24 00:19:36.761] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:19:36.761] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:19:37.369] INIT: version 2.96 booting [2025-09-24 00:19:37.480] INIT: Entering runlevel: 5 [2025-09-24 00:19:37.625] mtd24 attached [2025-09-24 00:19:37.641] mtd28 attached [2025-09-24 00:19:37.656] mtd32 attached [2025-09-24 00:19:37.672] ubi0:textures is mounted. [2025-09-24 00:19:37.704] RTNETLINK answers: File exists [2025-09-24 00:19:37.765] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:19:37.765] ubi2:dml_code is mounted. [2025-09-24 00:19:37.765] ubi1:animations is mounted. [2025-09-24 00:19:37.765] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:19:37.765] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:19:37.765] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:19:37.765] data.LB_FadeInType0=100 [2025-09-24 00:19:37.765] data.CHLH_FadeInType0=0 [2025-09-24 00:19:37.765] data.WU_FadeInDelay=0 [2025-09-24 00:19:37.765] max_time_out=0 [2025-09-24 00:19:37.765] No splash screen [2025-09-24 00:19:37.765] stop dss Done [2025-09-24 00:19:37.765] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:19:37.797] /dev/mem opened. [2025-09-24 00:19:37.797] Memory mapped at address 0xffff93adf000. [2025-09-24 00:19:37.823] Read at address 0x00600018 (0xffff93adf018): 0x00000000 [2025-09-24 00:19:37.823] Write at address 0x00600018 (0xffff93adf018): 0x00400040, readback 0x00400040 [2025-09-24 00:19:37.871] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:19:37.887] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:19:38.063] Loaded PowerVR consumer services. [2025-09-24 00:19:38.124] 512+0 records in [2025-09-24 00:19:38.124] 512+0 records out [2025-09-24 00:19:38.124] Waiting data available... [2025-09-24 00:19:38.140] Starting syslogd/klogd: done [2025-09-24 00:19:38.156] DML Start [2025-09-24 00:19:38.300] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:19:38.523] DML res1: 0 [2025-09-24 00:19:38.987] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:19:39.008] Read Success [2025-09-24 00:19:39.008] Verifying certificate... [2025-09-24 00:19:39.264] Verified OK [2025-09-24 00:19:39.280] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:19:40.959] Verified OK [2025-09-24 00:19:40.959] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:19:41.513] Verified OK [2025-09-24 00:19:41.513] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:19:44.008] fs.protected_hardlinks = 1 [2025-09-24 00:19:44.008] fs.protected_symlinks = 1 [2025-09-24 00:19:44.024] kernel.modules_disabled = 1 [2025-09-24 00:19:44.232] [2025-09-24 00:19:44.232] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:19:45.612] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:19:53.414] SBL1:1210.0.1.0 [2025-09-24 00:19:53.446] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:19:55.029] SBL2:1210.0.1.0 [2025-09-24 00:19:55.061] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:19:55.173] j-A [2025-09-24 00:20:02.546] The R5 Autosar Classic is running [2025-09-24 00:20:02.546] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:20:02.546] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:20:03.153] INIT: version 2.96 booting [2025-09-24 00:20:03.265] INIT: Entering runlevel: 5 [2025-09-24 00:20:03.426] mtd24 attached [2025-09-24 00:20:03.426] mtd28 attached [2025-09-24 00:20:03.442] mtd32 attached [2025-09-24 00:20:03.474] ubi0:textures is mounted. [2025-09-24 00:20:03.490] RTNETLINK answers: File exists [2025-09-24 00:20:03.533] ubi1:animations is mounted. [2025-09-24 00:20:03.533] ubi2:dml_code is mounted. [2025-09-24 00:20:03.533] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:20:03.533] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:20:03.533] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:20:03.533] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:20:03.533] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:20:03.554] data.LB_FadeInType0=100 [2025-09-24 00:20:03.554] data.CHLH_FadeInType0=0 [2025-09-24 00:20:03.554] data.WU_FadeInDelay=0 [2025-09-24 00:20:03.554] max_time_out=0 [2025-09-24 00:20:03.554] No splash screen [2025-09-24 00:20:03.554] stop dss Done [2025-09-24 00:20:03.629] /dev/mem opened. [2025-09-24 00:20:03.629] Memory mapped at address 0xffffbe45c000. [2025-09-24 00:20:03.629] Read at address 0x00600018 (0xffffbe45c018): 0x00000000 [2025-09-24 00:20:03.629] Write at address 0x00600018 (0xffffbe45c018): 0x00400040, readback 0x00400040 [2025-09-24 00:20:03.629] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:20:03.629] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:20:03.837] Loaded PowerVR consumer services. [2025-09-24 00:20:03.870] Waiting data available... [2025-09-24 00:20:03.886] 512+0 records in [2025-09-24 00:20:03.886] 512+0 records out [2025-09-24 00:20:03.933] Starting syslogd/klogd: done [2025-09-24 00:20:03.949] DML Start [2025-09-24 00:20:04.141] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:20:04.365] DML res1: 0 [2025-09-24 00:20:04.841] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:20:04.841] Read Success [2025-09-24 00:20:04.841] Verifying certificate... [2025-09-24 00:20:05.081] Verified OK [2025-09-24 00:20:05.097] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:20:06.902] Verified OK [2025-09-24 00:20:06.902] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:20:07.469] Verified OK [2025-09-24 00:20:07.469] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:20:09.996] fs.protected_hardlinks = 1 [2025-09-24 00:20:10.011] fs.protected_symlinks = 1 [2025-09-24 00:20:10.011] kernel.modules_disabled = 1 [2025-09-24 00:20:10.203] [2025-09-24 00:20:10.204] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:20:11.451] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:20:19.216] SBL1:1210.0.1.0 [2025-09-24 00:20:19.248] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:20:20.830] SBL2:1210.0.1.0 [2025-09-24 00:20:20.862] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:20:20.975] j-A [2025-09-24 00:20:28.348] The R5 Autosar Classic is running [2025-09-24 00:20:28.348] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:20:28.348] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:20:28.956] INIT: version 2.96 booting [2025-09-24 00:20:29.067] INIT: Entering runlevel: 5 [2025-09-24 00:20:29.211] mtd24 attached [2025-09-24 00:20:29.227] mtd28 attached [2025-09-24 00:20:29.243] mtd32 attached [2025-09-24 00:20:29.291] RTNETLINK answers: File exists [2025-09-24 00:20:29.291] ubi0:textures is mounted. [2025-09-24 00:20:29.350] ubi1:animations is mounted. [2025-09-24 00:20:29.351] ubi2:dml_code is mounted. [2025-09-24 00:20:29.351] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:20:29.351] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:20:29.351] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:20:29.351] data.LB_FadeInType0=100 [2025-09-24 00:20:29.351] data.CHLH_FadeInType0=0 [2025-09-24 00:20:29.351] data.WU_FadeInDelay=0 [2025-09-24 00:20:29.351] max_time_out=0 [2025-09-24 00:20:29.351] No splash screen [2025-09-24 00:20:29.351] stop dss Done [2025-09-24 00:20:29.351] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:20:29.351] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:20:29.403] /dev/mem opened. [2025-09-24 00:20:29.403] Memory mapped at address 0xffffae35d000. [2025-09-24 00:20:29.403] Read at address 0x00600018 (0xffffae35d018): 0x00000000 [2025-09-24 00:20:29.403] Write at address 0x00600018 (0xffffae35d018): 0x00400040, readback 0x00400040 [2025-09-24 00:20:29.419] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:20:29.435] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:20:29.515] Loaded PowerVR consumer services. [2025-09-24 00:20:29.682] 512+0 records in [2025-09-24 00:20:29.682] 512+0 records out [2025-09-24 00:20:29.682] Waiting data available... [2025-09-24 00:20:29.713] Starting syslogd/klogd: done [2025-09-24 00:20:29.745] DML Start [2025-09-24 00:20:29.922] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:20:30.194] DML res1: 0 [2025-09-24 00:20:30.557] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:20:30.557] Read Success [2025-09-24 00:20:30.557] Verifying certificate... [2025-09-24 00:20:30.845] Verified OK [2025-09-24 00:20:30.861] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:20:32.634] Verified OK [2025-09-24 00:20:32.634] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:20:33.130] Verified OK [2025-09-24 00:20:33.130] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:20:35.576] fs.protected_hardlinks = 1 [2025-09-24 00:20:35.592] fs.protected_symlinks = 1 [2025-09-24 00:20:35.592] kernel.modules_disabled = 1 [2025-09-24 00:20:35.800] [2025-09-24 00:20:35.800] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:20:37.248] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:20:45.000] SBL1:1210.0.1.0 [2025-09-24 00:20:45.048] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:20:46.614] SBL2:1210.0.1.0 [2025-09-24 00:20:46.646] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:20:46.758] j-A [2025-09-24 00:20:54.132] The R5 Autosar Classic is running [2025-09-24 00:20:54.132] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:20:54.132] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:20:54.739] INIT: version 2.96 booting [2025-09-24 00:20:54.851] INIT: Entering runlevel: 5 [2025-09-24 00:20:55.012] mtd24 attached [2025-09-24 00:20:55.012] mtd28 attached [2025-09-24 00:20:55.028] mtd32 attached [2025-09-24 00:20:55.075] RTNETLINK answers: File exists [2025-09-24 00:20:55.144] ubi1:animations is mounted. [2025-09-24 00:20:55.144] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:20:55.144] ubi0:textures is mounted. [2025-09-24 00:20:55.144] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:20:55.144] ubi2:dml_code is mounted. [2025-09-24 00:20:55.144] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:20:55.144] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:20:55.144] data.LB_FadeInType0=100 [2025-09-24 00:20:55.144] data.CHLH_FadeInType0=0 [2025-09-24 00:20:55.144] data.WU_FadeInDelay=0 [2025-09-24 00:20:55.144] max_time_out=0 [2025-09-24 00:20:55.144] No splash screen [2025-09-24 00:20:55.144] stop dss Done [2025-09-24 00:20:55.144] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:20:55.207] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:20:55.207] /dev/mem opened. [2025-09-24 00:20:55.207] Memory mapped at address 0xffffa3c56000. [2025-09-24 00:20:55.207] Read at address 0x00600018 (0xffffa3c56018): 0x00000000 [2025-09-24 00:20:55.207] Write at address 0x00600018 (0xffffa3c56018): 0x00400040, readback 0x00400040 [2025-09-24 00:20:55.207] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:20:55.318] Loaded PowerVR consumer services. [2025-09-24 00:20:55.462] Waiting data available... [2025-09-24 00:20:55.462] 512+0 records in [2025-09-24 00:20:55.478] 512+0 records out [2025-09-24 00:20:55.526] Starting syslogd/klogd: done [2025-09-24 00:20:55.542] DML Start [2025-09-24 00:20:55.750] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:20:56.006] DML res1: 0 [2025-09-24 00:20:56.349] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:20:56.349] Read Success [2025-09-24 00:20:56.349] Verifying certificate... [2025-09-24 00:20:56.637] Verified OK [2025-09-24 00:20:56.652] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:20:58.391] Verified OK [2025-09-24 00:20:58.391] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:20:59.023] Verified OK [2025-09-24 00:20:59.023] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:21:01.627] fs.protected_hardlinks = 1 [2025-09-24 00:21:01.627] fs.protected_symlinks = 1 [2025-09-24 00:21:01.627] kernel.modules_disabled = 1 [2025-09-24 00:21:01.803] [2025-09-24 00:21:01.803] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:21:03.060] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:21:10.801] SBL1:1210.0.1.0 [2025-09-24 00:21:10.848] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:21:12.415] SBL2:1210.0.1.0 [2025-09-24 00:21:12.447] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:21:12.559] j-A [2025-09-24 00:21:19.934] The R5 Autosar Classic is running [2025-09-24 00:21:19.934] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:21:19.934] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:21:20.542] INIT: version 2.96 booting [2025-09-24 00:21:20.653] INIT: Entering runlevel: 5 [2025-09-24 00:21:20.814] mtd24 attached [2025-09-24 00:21:20.814] mtd28 attached [2025-09-24 00:21:20.846] mtd32 attached [2025-09-24 00:21:20.878] RTNETLINK answers: File exists [2025-09-24 00:21:20.878] ubi0:textures is mounted. [2025-09-24 00:21:20.917] ubi1:animations is mounted. [2025-09-24 00:21:20.917] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:21:20.917] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:21:20.917] ubi2:dml_code is mounted. [2025-09-24 00:21:20.917] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:21:20.917] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:21:20.917] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:21:20.940] data.LB_FadeInType0=100 [2025-09-24 00:21:20.940] data.CHLH_FadeInType0=0 [2025-09-24 00:21:20.940] data.WU_FadeInDelay=0 [2025-09-24 00:21:20.940] max_time_out=0 [2025-09-24 00:21:20.940] No splash screen [2025-09-24 00:21:20.940] stop dss Done [2025-09-24 00:21:21.027] /dev/mem opened. [2025-09-24 00:21:21.027] Memory mapped at address 0xffff91814000. [2025-09-24 00:21:21.027] Read at address 0x00600018 (0xffff91814018): 0x00000000 [2025-09-24 00:21:21.027] Write at address 0x00600018 (0xffff91814018): 0x00400040, readback 0x00400040 [2025-09-24 00:21:21.027] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:21:21.027] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:21:21.122] Loaded PowerVR consumer services. [2025-09-24 00:21:21.273] 512+0 records in [2025-09-24 00:21:21.273] 512+0 records out [2025-09-24 00:21:21.273] Waiting data available... [2025-09-24 00:21:21.305] Starting syslogd/klogd: done [2025-09-24 00:21:21.321] DML Start [2025-09-24 00:21:21.512] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:21:21.737] DML res1: 0 [2025-09-24 00:21:22.168] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:21:22.168] Read Success [2025-09-24 00:21:22.184] Verifying certificate... [2025-09-24 00:21:22.423] Verified OK [2025-09-24 00:21:22.439] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:21:24.019] Verified OK [2025-09-24 00:21:24.019] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:21:24.687] Verified OK [2025-09-24 00:21:24.687] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:21:27.197] fs.protected_hardlinks = 1 [2025-09-24 00:21:27.213] fs.protected_symlinks = 1 [2025-09-24 00:21:27.213] kernel.modules_disabled = 1 [2025-09-24 00:21:27.405] [2025-09-24 00:21:27.405] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:21:28.827] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:21:36.591] SBL1:1210.0.1.0 [2025-09-24 00:21:36.639] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:21:38.206] SBL2:1210.0.1.0 [2025-09-24 00:21:38.254] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:21:38.349] j-A [2025-09-24 00:21:45.706] The R5 Autosar Classic is running [2025-09-24 00:21:45.706] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:21:45.727] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:21:46.335] INIT: version 2.96 booting [2025-09-24 00:21:46.446] INIT: Entering runlevel: 5 [2025-09-24 00:21:46.606] mtd28 attached [2025-09-24 00:21:46.606] mtd24 attached [2025-09-24 00:21:46.622] mtd32 attached [2025-09-24 00:21:46.654] ubi0:animations is mounted. [2025-09-24 00:21:46.670] RTNETLINK answers: File exists [2025-09-24 00:21:46.738] ubi1:textures is mounted. [2025-09-24 00:21:46.738] ubi2:dml_code is mounted. [2025-09-24 00:21:46.738] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:21:46.738] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:21:46.738] data.LB_FadeInType0=100 [2025-09-24 00:21:46.738] data.CHLH_FadeInType0=0 [2025-09-24 00:21:46.738] data.WU_FadeInDelay=0 [2025-09-24 00:21:46.738] max_time_out=0 [2025-09-24 00:21:46.738] No splash screen [2025-09-24 00:21:46.738] stop dss Done [2025-09-24 00:21:46.738] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:21:46.738] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:21:46.738] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:21:46.815] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:21:46.815] /dev/mem opened. [2025-09-24 00:21:46.815] Memory mapped at address 0xffff81ca4000. [2025-09-24 00:21:46.815] Read at address 0x00600018 (0xffff81ca4018): 0x00000000 [2025-09-24 00:21:46.815] Write at address 0x00600018 (0xffff81ca4018): 0x00400040, readback 0x00400040 [2025-09-24 00:21:46.815] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:21:47.024] Loaded PowerVR consumer services. [2025-09-24 00:21:47.056] Waiting data available... [2025-09-24 00:21:47.071] 512+0 records in [2025-09-24 00:21:47.071] 512+0 records out [2025-09-24 00:21:47.103] Starting syslogd/klogd: done [2025-09-24 00:21:47.119] DML Start [2025-09-24 00:21:47.280] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:21:47.520] DML res1: 0 [2025-09-24 00:21:47.967] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:21:47.983] Read Success [2025-09-24 00:21:47.983] Verifying certificate... [2025-09-24 00:21:48.207] Verified OK [2025-09-24 00:21:48.207] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:21:49.939] Verified OK [2025-09-24 00:21:49.939] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:21:50.472] Verified OK [2025-09-24 00:21:50.472] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:21:52.902] fs.protected_hardlinks = 1 [2025-09-24 00:21:52.902] fs.protected_symlinks = 1 [2025-09-24 00:21:52.919] kernel.modules_disabled = 1 [2025-09-24 00:21:53.110] [2025-09-24 00:21:53.110] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:21:54.647] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:22:02.379] SBL1:1210.0.1.0 [2025-09-24 00:22:02.427] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:22:03.994] SBL2:1210.0.1.0 [2025-09-24 00:22:04.025] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:22:04.137] j-A [2025-09-24 00:22:11.512] The R5 Autosar Classic is running [2025-09-24 00:22:11.512] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:22:11.512] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:22:12.120] INIT: version 2.96 booting [2025-09-24 00:22:12.231] INIT: Entering runlevel: 5 [2025-09-24 00:22:12.392] mtd24 attached [2025-09-24 00:22:12.392] mtd28 attached [2025-09-24 00:22:12.408] mtd32 attached [2025-09-24 00:22:12.456] RTNETLINK answers: File exists [2025-09-24 00:22:12.504] ubi0:textures is mounted. [2025-09-24 00:22:12.504] ubi1:animations is mounted. [2025-09-24 00:22:12.504] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:22:12.504] ubi2:dml_code is mounted. [2025-09-24 00:22:12.504] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:22:12.504] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:22:12.504] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:22:12.504] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:22:12.527] data.LB_FadeInType0=100 [2025-09-24 00:22:12.527] data.CHLH_FadeInType0=0 [2025-09-24 00:22:12.527] data.WU_FadeInDelay=0 [2025-09-24 00:22:12.527] max_time_out=0 [2025-09-24 00:22:12.527] No splash screen [2025-09-24 00:22:12.527] stop dss Done [2025-09-24 00:22:12.604] /dev/mem opened. [2025-09-24 00:22:12.604] Memory mapped at address 0xffffb564e000. [2025-09-24 00:22:12.604] Read at address 0x00600018 (0xffffb564e018): 0x00000000 [2025-09-24 00:22:12.604] Write at address 0x00600018 (0xffffb564e018): 0x00400040, readback 0x00400040 [2025-09-24 00:22:12.604] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:22:12.604] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:22:12.684] Loaded PowerVR consumer services. [2025-09-24 00:22:12.828] Waiting data available... [2025-09-24 00:22:12.844] 512+0 records in [2025-09-24 00:22:12.844] 512+0 records out [2025-09-24 00:22:12.892] Starting syslogd/klogd: done [2025-09-24 00:22:12.908] DML Start [2025-09-24 00:22:13.099] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:22:13.323] DML res1: 0 [2025-09-24 00:22:13.698] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:22:13.698] Read Success [2025-09-24 00:22:13.698] Verifying certificate... [2025-09-24 00:22:13.938] Verified OK [2025-09-24 00:22:13.954] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:22:15.676] Verified OK [2025-09-24 00:22:15.676] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:22:16.264] Verified OK [2025-09-24 00:22:16.264] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:22:18.806] fs.protected_hardlinks = 1 [2025-09-24 00:22:18.822] fs.protected_symlinks = 1 [2025-09-24 00:22:18.822] kernel.modules_disabled = 1 [2025-09-24 00:22:19.014] [2025-09-24 00:22:19.014] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:22:20.428] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:22:28.168] SBL1:1210.0.1.0 [2025-09-24 00:22:28.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:22:29.783] SBL2:1210.0.1.0 [2025-09-24 00:22:29.831] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:22:29.927] j-A [2025-09-24 00:22:37.282] The R5 Autosar Classic is running [2025-09-24 00:22:37.303] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:22:37.303] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:22:37.911] INIT: version 2.96 booting [2025-09-24 00:22:38.023] INIT: Entering runlevel: 5 [2025-09-24 00:22:38.184] mtd24 attached [2025-09-24 00:22:38.184] mtd28 attached [2025-09-24 00:22:38.200] mtd32 attached [2025-09-24 00:22:38.247] ubi0:textures is mounted. [2025-09-24 00:22:38.304] RTNETLINK answers: File exists [2025-09-24 00:22:38.304] ubi1:animations is mounted. [2025-09-24 00:22:38.304] ubi2:dml_code is mounted. [2025-09-24 00:22:38.304] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:22:38.304] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:22:38.304] data.LB_FadeInType0=100 [2025-09-24 00:22:38.304] data.CHLH_FadeInType0=0 [2025-09-24 00:22:38.304] data.WU_FadeInDelay=0 [2025-09-24 00:22:38.304] max_time_out=0 [2025-09-24 00:22:38.304] No splash screen [2025-09-24 00:22:38.304] stop dss Done [2025-09-24 00:22:38.304] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:22:38.304] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:22:38.320] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:22:38.372] /dev/mem opened. [2025-09-24 00:22:38.372] Memory mapped at address 0xffffb835a000. [2025-09-24 00:22:38.372] Read at address 0x00600018 (0xffffb835a018): 0x00000000 [2025-09-24 00:22:38.372] Write at address 0x00600018 (0xffffb835a018): 0x00400040, readback 0x00400040 [2025-09-24 00:22:38.372] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:22:38.388] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:22:38.500] Loaded PowerVR consumer services. [2025-09-24 00:22:38.628] Waiting data available... [2025-09-24 00:22:38.644] 512+0 records in [2025-09-24 00:22:38.644] 512+0 records out [2025-09-24 00:22:38.676] Starting syslogd/klogd: done [2025-09-24 00:22:38.692] DML Start [2025-09-24 00:22:38.883] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:22:39.140] DML res1: 0 [2025-09-24 00:22:39.524] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:22:39.524] Read Success [2025-09-24 00:22:39.539] Verifying certificate... [2025-09-24 00:22:39.780] Verified OK [2025-09-24 00:22:39.796] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:22:41.578] Verified OK [2025-09-24 00:22:41.578] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:22:42.182] Verified OK [2025-09-24 00:22:42.182] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:22:44.740] fs.protected_hardlinks = 1 [2025-09-24 00:22:44.740] fs.protected_symlinks = 1 [2025-09-24 00:22:44.756] kernel.modules_disabled = 1 [2025-09-24 00:22:44.948] [2025-09-24 00:22:44.948] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:22:46.204] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:22:53.977] SBL1:1210.0.1.0 [2025-09-24 00:22:54.025] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:22:55.592] SBL2:1210.0.1.0 [2025-09-24 00:22:55.640] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:22:55.735] j-A [2025-09-24 00:23:03.090] The R5 Autosar Classic is running [2025-09-24 00:23:03.115] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:23:03.115] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:23:03.723] INIT: version 2.96 booting [2025-09-24 00:23:03.834] INIT: Entering runlevel: 5 [2025-09-24 00:23:03.979] mtd24 attached [2025-09-24 00:23:03.995] mtd28 attached [2025-09-24 00:23:04.011] mtd32 attached [2025-09-24 00:23:04.059] RTNETLINK answers: File exists [2025-09-24 00:23:04.059] ubi1:animations is mounted. [2025-09-24 00:23:04.095] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:23:04.095] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:23:04.095] ubi0:textures is mounted. [2025-09-24 00:23:04.095] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:23:04.095] ubi2:dml_code is mounted. [2025-09-24 00:23:04.095] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:23:04.095] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:23:04.123] data.LB_FadeInType0=100 [2025-09-24 00:23:04.123] data.CHLH_FadeInType0=0 [2025-09-24 00:23:04.123] data.WU_FadeInDelay=0 [2025-09-24 00:23:04.123] max_time_out=0 [2025-09-24 00:23:04.123] No splash screen [2025-09-24 00:23:04.123] stop dss Done [2025-09-24 00:23:04.166] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:23:04.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:23:04.205] /dev/mem opened. [2025-09-24 00:23:04.205] Memory mapped at address 0xffff83403000. [2025-09-24 00:23:04.205] Read at address 0x00600018 (0xffff83403018): 0x00000000 [2025-09-24 00:23:04.205] Write at address 0x00600018 (0xffff83403018): 0x00400040, readback 0x00400040 [2025-09-24 00:23:04.302] Loaded PowerVR consumer services. [2025-09-24 00:23:04.456] Waiting data available... [2025-09-24 00:23:04.456] 512+0 records in [2025-09-24 00:23:04.456] 512+0 records out [2025-09-24 00:23:04.472] Starting syslogd/klogd: done [2025-09-24 00:23:04.488] DML Start [2025-09-24 00:23:04.649] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:23:04.920] DML res1: 0 [2025-09-24 00:23:05.357] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:23:05.357] Read Success [2025-09-24 00:23:05.357] Verifying certificate... [2025-09-24 00:23:05.580] Verified OK [2025-09-24 00:23:05.597] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:23:07.243] Verified OK [2025-09-24 00:23:07.243] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:23:07.851] Verified OK [2025-09-24 00:23:07.851] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:23:10.649] fs.protected_hardlinks = 1 [2025-09-24 00:23:10.665] fs.protected_symlinks = 1 [2025-09-24 00:23:10.665] kernel.modules_disabled = 1 [2025-09-24 00:23:10.889] [2025-09-24 00:23:10.889] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:23:12.024] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:23:19.778] SBL1:1210.0.1.0 [2025-09-24 00:23:19.826] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:23:21.393] SBL2:1210.0.1.0 [2025-09-24 00:23:21.441] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:23:21.537] j-A [2025-09-24 00:23:28.891] The R5 Autosar Classic is running [2025-09-24 00:23:28.891] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:23:28.912] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:23:29.520] INIT: version 2.96 booting [2025-09-24 00:23:29.631] INIT: Entering runlevel: 5 [2025-09-24 00:23:29.792] mtd32 attached [2025-09-24 00:23:29.792] mtd24 attached [2025-09-24 00:23:29.808] mtd28 attached [2025-09-24 00:23:29.856] RTNETLINK answers: File exists [2025-09-24 00:23:29.919] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:23:29.919] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:23:29.919] ubi0:dml_code is mounted. [2025-09-24 00:23:29.919] ubi2:animations is mounted. [2025-09-24 00:23:29.919] ubi1:textures is mounted. [2025-09-24 00:23:29.919] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:23:29.919] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:23:29.919] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:23:29.919] data.LB_FadeInType0=100 [2025-09-24 00:23:29.919] data.CHLH_FadeInType0=0 [2025-09-24 00:23:29.919] data.WU_FadeInDelay=0 [2025-09-24 00:23:29.919] max_time_out=0 [2025-09-24 00:23:29.919] No splash screen [2025-09-24 00:23:29.919] stop dss Done [2025-09-24 00:23:30.005] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:23:30.005] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:23:30.005] /dev/mem opened. [2025-09-24 00:23:30.005] Memory mapped at address 0xffffa298f000. [2025-09-24 00:23:30.005] Read at address 0x00600018 (0xffffa298f018): 0x00000000 [2025-09-24 00:23:30.005] Write at address 0x00600018 (0xffffa298f018): 0x00400040, readback 0x00400040 [2025-09-24 00:23:30.198] Loaded PowerVR consumer services. [2025-09-24 00:23:30.230] Waiting data available... [2025-09-24 00:23:30.246] 512+0 records in [2025-09-24 00:23:30.246] 512+0 records out [2025-09-24 00:23:30.278] Starting syslogd/klogd: done [2025-09-24 00:23:30.294] DML Start [2025-09-24 00:23:30.485] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:23:30.709] DML res1: 0 [2025-09-24 00:23:31.139] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:23:31.139] Read Success [2025-09-24 00:23:31.139] Verifying certificate... [2025-09-24 00:23:31.379] Verified OK [2025-09-24 00:23:31.395] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:23:32.898] Verified OK [2025-09-24 00:23:32.914] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:23:33.581] Verified OK [2025-09-24 00:23:33.581] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:23:36.284] fs.protected_hardlinks = 1 [2025-09-24 00:23:36.284] fs.protected_symlinks = 1 [2025-09-24 00:23:36.299] kernel.modules_disabled = 1 [2025-09-24 00:23:36.491] [2025-09-24 00:23:36.491] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:23:37.811] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:23:45.586] SBL1:1210.0.1.0 [2025-09-24 00:23:45.634] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:23:47.201] SBL2:1210.0.1.0 [2025-09-24 00:23:47.249] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:23:47.345] j-A [2025-09-24 00:23:54.698] The R5 Autosar Classic is running [2025-09-24 00:23:54.722] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:23:54.722] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:23:55.330] INIT: version 2.96 booting [2025-09-24 00:23:55.442] INIT: Entering runlevel: 5 [2025-09-24 00:23:55.585] mtd24 attached [2025-09-24 00:23:55.601] mtd32 attached [2025-09-24 00:23:55.617] mtd28 attached [2025-09-24 00:23:55.633] ubi0:textures is mounted. [2025-09-24 00:23:55.666] RTNETLINK answers: File exists [2025-09-24 00:23:55.718] ubi1:dml_code is mounted. [2025-09-24 00:23:55.718] ubi2:animations is mounted. [2025-09-24 00:23:55.718] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:23:55.718] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:23:55.718] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:23:55.718] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:23:55.718] data.LB_FadeInType0=100 [2025-09-24 00:23:55.718] data.CHLH_FadeInType0=0 [2025-09-24 00:23:55.718] data.WU_FadeInDelay=0 [2025-09-24 00:23:55.718] max_time_out=0 [2025-09-24 00:23:55.718] No splash screen [2025-09-24 00:23:55.718] stop dss Done [2025-09-24 00:23:55.718] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:23:55.766] /dev/mem opened. [2025-09-24 00:23:55.798] Memory mapped at address 0xffff9552e000. [2025-09-24 00:23:55.798] Read at address 0x00600018 (0xffff9552e018): 0x00000000 [2025-09-24 00:23:55.798] Write at address 0x00600018 (0xffff9552e018): 0x00400040, readback 0x00400040 [2025-09-24 00:23:55.798] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:23:55.813] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:23:55.941] Loaded PowerVR consumer services. [2025-09-24 00:23:56.075] Waiting data available... [2025-09-24 00:23:56.075] 512+0 records in [2025-09-24 00:23:56.075] 512+0 records out [2025-09-24 00:23:56.107] Starting syslogd/klogd: done [2025-09-24 00:23:56.123] DML Start [2025-09-24 00:23:56.315] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:23:56.539] DML res1: 0 [2025-09-24 00:23:56.982] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:23:56.982] Read Success [2025-09-24 00:23:56.982] Verifying certificate... [2025-09-24 00:23:57.270] Verified OK [2025-09-24 00:23:57.285] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:23:58.989] Verified OK [2025-09-24 00:23:58.989] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:23:59.563] Verified OK [2025-09-24 00:23:59.563] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:24:02.025] fs.protected_hardlinks = 1 [2025-09-24 00:24:02.055] fs.protected_symlinks = 1 [2025-09-24 00:24:02.055] kernel.modules_disabled = 1 [2025-09-24 00:24:02.247] [2025-09-24 00:24:02.247] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:24:03.628] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:24:11.393] SBL1:1210.0.1.0 [2025-09-24 00:24:11.425] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:24:13.008] SBL2:1210.0.1.0 [2025-09-24 00:24:13.040] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:24:13.152] j-A [2025-09-24 00:24:20.525] The R5 Autosar Classic is running [2025-09-24 00:24:20.525] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:24:20.525] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:24:21.132] INIT: version 2.96 booting [2025-09-24 00:24:21.245] INIT: Entering runlevel: 5 [2025-09-24 00:24:21.404] mtd24 attached [2025-09-24 00:24:21.404] mtd28 attached [2025-09-24 00:24:21.420] mtd32 attached [2025-09-24 00:24:21.469] RTNETLINK answers: File exists [2025-09-24 00:24:21.469] ubi0:textures is mounted. [2025-09-24 00:24:21.529] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:24:21.529] ubi2:dml_code is mounted. [2025-09-24 00:24:21.529] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:24:21.529] ubi1:animations is mounted. [2025-09-24 00:24:21.529] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:24:21.529] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:24:21.529] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:24:21.529] data.LB_FadeInType0=100 [2025-09-24 00:24:21.529] data.CHLH_FadeInType0=0 [2025-09-24 00:24:21.529] data.WU_FadeInDelay=0 [2025-09-24 00:24:21.529] max_time_out=0 [2025-09-24 00:24:21.529] No splash screen [2025-09-24 00:24:21.529] stop dss Done [2025-09-24 00:24:21.594] /dev/mem opened. [2025-09-24 00:24:21.594] Memory mapped at address 0xffffb8a90000. [2025-09-24 00:24:21.594] Read at address 0x00600018 (0xffffb8a90018): 0x00000000 [2025-09-24 00:24:21.594] Write at address 0x00600018 (0xffffb8a90018): 0x00400040, readback 0x00400040 [2025-09-24 00:24:21.594] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:24:21.610] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:24:21.834] Loaded PowerVR consumer services. [2025-09-24 00:24:21.866] Waiting data available... [2025-09-24 00:24:21.882] 512+0 records in [2025-09-24 00:24:21.882] 512+0 records out [2025-09-24 00:24:21.914] Starting syslogd/klogd: done [2025-09-24 00:24:21.946] DML Start [2025-09-24 00:24:22.089] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:24:22.298] DML res1: 0 [2025-09-24 00:24:22.753] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:24:22.753] Read Success [2025-09-24 00:24:22.753] Verifying certificate... [2025-09-24 00:24:22.992] Verified OK [2025-09-24 00:24:22.992] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:24:24.639] Verified OK [2025-09-24 00:24:24.639] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:24:25.244] Verified OK [2025-09-24 00:24:25.244] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:24:27.898] fs.protected_hardlinks = 1 [2025-09-24 00:24:27.914] fs.protected_symlinks = 1 [2025-09-24 00:24:27.914] kernel.modules_disabled = 1 [2025-09-24 00:24:28.106] [2025-09-24 00:24:28.106] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:24:29.424] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:24:37.190] SBL1:1210.0.1.0 [2025-09-24 00:24:37.238] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:24:38.805] SBL2:1210.0.1.0 [2025-09-24 00:24:38.837] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:24:38.949] j-A [2025-09-24 00:24:46.303] The R5 Autosar Classic is running [2025-09-24 00:24:46.303] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:24:46.324] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:24:46.931] INIT: version 2.96 booting [2025-09-24 00:24:47.042] INIT: Entering runlevel: 5 [2025-09-24 00:24:47.186] mtd28 attached [2025-09-24 00:24:47.202] mtd24 attached [2025-09-24 00:24:47.218] mtd32 attached [2025-09-24 00:24:47.300] RTNETLINK answers: File exists [2025-09-24 00:24:47.300] ubi0:animations is mounted. [2025-09-24 00:24:47.300] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:24:47.300] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:24:47.300] ubi1:textures is mounted. [2025-09-24 00:24:47.300] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:24:47.300] ubi2:dml_code is mounted. [2025-09-24 00:24:47.300] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:24:47.300] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:24:47.325] data.LB_FadeInType0=100 [2025-09-24 00:24:47.325] data.CHLH_FadeInType0=0 [2025-09-24 00:24:47.325] data.WU_FadeInDelay=0 [2025-09-24 00:24:47.325] max_time_out=0 [2025-09-24 00:24:47.325] No splash screen [2025-09-24 00:24:47.325] stop dss Done [2025-09-24 00:24:47.341] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:24:47.341] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:24:47.373] /dev/mem opened. [2025-09-24 00:24:47.373] Memory mapped at address 0xffff80411000. [2025-09-24 00:24:47.399] Read at address 0x00600018 (0xffff80411018): 0x00000000 [2025-09-24 00:24:47.399] Write at address 0x00600018 (0xffff80411018): 0x00400040, readback 0x00400040 [2025-09-24 00:24:47.511] Loaded PowerVR consumer services. [2025-09-24 00:24:47.639] Waiting data available... [2025-09-24 00:24:47.655] 512+0 records in [2025-09-24 00:24:47.655] 512+0 records out [2025-09-24 00:24:47.687] Starting syslogd/klogd: done [2025-09-24 00:24:47.703] DML Start [2025-09-24 00:24:47.911] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:24:48.135] DML res1: 0 [2025-09-24 00:24:48.556] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:24:48.556] Read Success [2025-09-24 00:24:48.556] Verifying certificate... [2025-09-24 00:24:48.828] Verified OK [2025-09-24 00:24:48.844] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:24:50.698] Verified OK [2025-09-24 00:24:50.698] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:24:51.241] Verified OK [2025-09-24 00:24:51.262] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:24:53.662] fs.protected_hardlinks = 1 [2025-09-24 00:24:53.662] fs.protected_symlinks = 1 [2025-09-24 00:24:53.677] kernel.modules_disabled = 1 [2025-09-24 00:24:53.853] [2025-09-24 00:24:53.853] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:24:55.187] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:25:02.995] SBL1:1210.0.1.0 [2025-09-24 00:25:03.027] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:25:04.609] SBL2:1210.0.1.0 [2025-09-24 00:25:04.641] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:25:04.754] j-A [2025-09-24 00:25:12.126] The R5 Autosar Classic is running [2025-09-24 00:25:12.126] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:25:12.126] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:25:12.734] INIT: version 2.96 booting [2025-09-24 00:25:12.845] INIT: Entering runlevel: 5 [2025-09-24 00:25:12.989] mtd24 attached [2025-09-24 00:25:13.005] mtd32 attached [2025-09-24 00:25:13.021] mtd28 attached [2025-09-24 00:25:13.125] RTNETLINK answers: File exists [2025-09-24 00:25:13.125] ubi0:textures is mounted. [2025-09-24 00:25:13.125] ubi1:dml_code is mounted. [2025-09-24 00:25:13.125] ubi2:animations is mounted. [2025-09-24 00:25:13.125] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:25:13.125] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:25:13.125] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:25:13.125] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:25:13.125] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:25:13.125] data.LB_FadeInType0=100 [2025-09-24 00:25:13.125] data.CHLH_FadeInType0=0 [2025-09-24 00:25:13.125] data.WU_FadeInDelay=0 [2025-09-24 00:25:13.125] max_time_out=0 [2025-09-24 00:25:13.125] No splash screen [2025-09-24 00:25:13.125] stop dss Done [2025-09-24 00:25:13.156] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:25:13.156] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:25:13.192] /dev/mem opened. [2025-09-24 00:25:13.192] Memory mapped at address 0xffffac385000. [2025-09-24 00:25:13.192] Read at address 0x00600018 (0xffffac385018): 0x00000000 [2025-09-24 00:25:13.192] Write at address 0x00600018 (0xffffac385018): 0x00400040, readback 0x00400040 [2025-09-24 00:25:13.448] Loaded PowerVR consumer services. [2025-09-24 00:25:13.464] Waiting data available... [2025-09-24 00:25:13.480] 512+0 records in [2025-09-24 00:25:13.480] 512+0 records out [2025-09-24 00:25:13.512] Starting syslogd/klogd: done [2025-09-24 00:25:13.544] DML Start [2025-09-24 00:25:13.736] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:25:13.943] DML res1: 0 [2025-09-24 00:25:14.404] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:25:14.404] Read Success [2025-09-24 00:25:14.404] Verifying certificate... [2025-09-24 00:25:14.644] Verified OK [2025-09-24 00:25:14.660] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:25:16.195] Verified OK [2025-09-24 00:25:16.211] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:25:16.810] Verified OK [2025-09-24 00:25:16.810] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:25:19.432] fs.protected_hardlinks = 1 [2025-09-24 00:25:19.448] fs.protected_symlinks = 1 [2025-09-24 00:25:19.448] kernel.modules_disabled = 1 [2025-09-24 00:25:19.656] [2025-09-24 00:25:19.656] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:25:21.011] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:25:28.777] SBL1:1210.0.1.0 [2025-09-24 00:25:28.825] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:25:30.392] SBL2:1210.0.1.0 [2025-09-24 00:25:30.440] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:25:30.536] j-A [2025-09-24 00:25:37.892] The R5 Autosar Classic is running [2025-09-24 00:25:37.915] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:25:37.915] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:25:38.523] INIT: version 2.96 booting [2025-09-24 00:25:38.634] INIT: Entering runlevel: 5 [2025-09-24 00:25:38.794] mtd32 attached [2025-09-24 00:25:38.794] mtd24 attached [2025-09-24 00:25:38.810] mtd28 attached [2025-09-24 00:25:38.858] RTNETLINK answers: File exists [2025-09-24 00:25:38.858] ubi1:textures is mounted. [2025-09-24 00:25:38.894] ubi0:dml_code is mounted. [2025-09-24 00:25:38.894] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:25:38.894] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:25:38.894] ubi2:animations is mounted. [2025-09-24 00:25:38.894] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:25:38.894] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:25:38.894] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:25:38.925] data.LB_FadeInType0=100 [2025-09-24 00:25:38.925] data.CHLH_FadeInType0=0 [2025-09-24 00:25:38.925] data.WU_FadeInDelay=0 [2025-09-24 00:25:38.925] max_time_out=0 [2025-09-24 00:25:38.925] No splash screen [2025-09-24 00:25:38.925] stop dss Done [2025-09-24 00:25:39.012] /dev/mem opened. [2025-09-24 00:25:39.012] Memory mapped at address 0xffff94a11000. [2025-09-24 00:25:39.012] Read at address 0x00600018 (0xffff94a11018): 0x00000000 [2025-09-24 00:25:39.012] Write at address 0x00600018 (0xffff94a11018): 0x00400040, readback 0x00400040 [2025-09-24 00:25:39.012] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:25:39.012] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:25:39.108] Loaded PowerVR consumer services. [2025-09-24 00:25:39.265] Waiting data available... [2025-09-24 00:25:39.265] 512+0 records in [2025-09-24 00:25:39.265] 512+0 records out [2025-09-24 00:25:39.281] Starting syslogd/klogd: done [2025-09-24 00:25:39.297] DML Start [2025-09-24 00:25:39.473] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:25:39.696] DML res1: 0 [2025-09-24 00:25:40.156] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:25:40.156] Read Success [2025-09-24 00:25:40.156] Verifying certificate... [2025-09-24 00:25:40.412] Verified OK [2025-09-24 00:25:40.428] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:25:42.186] Verified OK [2025-09-24 00:25:42.186] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:25:42.761] Verified OK [2025-09-24 00:25:42.761] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:25:45.224] fs.protected_hardlinks = 1 [2025-09-24 00:25:45.240] fs.protected_symlinks = 1 [2025-09-24 00:25:45.240] kernel.modules_disabled = 1 [2025-09-24 00:25:45.431] [2025-09-24 00:25:45.431] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:25:46.759] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:25:54.576] SBL1:1210.0.1.0 [2025-09-24 00:25:54.624] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:25:56.191] SBL2:1210.0.1.0 [2025-09-24 00:25:56.239] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:25:56.336] j-A [2025-09-24 00:26:03.691] The R5 Autosar Classic is running [2025-09-24 00:26:03.713] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:26:03.713] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:26:04.320] INIT: version 2.96 booting [2025-09-24 00:26:04.433] INIT: Entering runlevel: 5 [2025-09-24 00:26:04.592] mtd32 attached [2025-09-24 00:26:04.592] mtd24 attached [2025-09-24 00:26:04.608] mtd28 attached [2025-09-24 00:26:04.656] ubi0:dml_code is mounted. [2025-09-24 00:26:04.656] ubi1:textures is mounted. [2025-09-24 00:26:04.726] RTNETLINK answers: File exists [2025-09-24 00:26:04.726] ubi2:animations is mounted. [2025-09-24 00:26:04.726] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:26:04.726] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:26:04.726] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:26:04.726] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:26:04.726] data.LB_FadeInType0=100 [2025-09-24 00:26:04.726] data.CHLH_FadeInType0=0 [2025-09-24 00:26:04.726] data.WU_FadeInDelay=0 [2025-09-24 00:26:04.726] max_time_out=0 [2025-09-24 00:26:04.726] No splash screen [2025-09-24 00:26:04.726] stop dss Done [2025-09-24 00:26:04.726] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:26:04.774] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:26:04.806] /dev/mem opened. [2025-09-24 00:26:04.806] Memory mapped at address 0xffffa6050000. [2025-09-24 00:26:04.806] Read at address 0x00600018 (0xffffa6050018): 0x00000000 [2025-09-24 00:26:04.806] Write at address 0x00600018 (0xffffa6050018): 0x00400040, readback 0x00400040 [2025-09-24 00:26:04.806] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:26:04.965] Loaded PowerVR consumer services. [2025-09-24 00:26:05.030] Waiting data available... [2025-09-24 00:26:05.046] 512+0 records in [2025-09-24 00:26:05.062] 512+0 records out [2025-09-24 00:26:05.094] Starting syslogd/klogd: done [2025-09-24 00:26:05.110] DML Start [2025-09-24 00:26:05.301] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:26:05.525] DML res1: 0 [2025-09-24 00:26:05.983] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:26:05.983] Read Success [2025-09-24 00:26:05.983] Verifying certificate... [2025-09-24 00:26:06.239] Verified OK [2025-09-24 00:26:06.255] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:26:07.948] Verified OK [2025-09-24 00:26:07.948] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:26:08.513] Verified OK [2025-09-24 00:26:08.513] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:26:11.007] fs.protected_hardlinks = 1 [2025-09-24 00:26:11.023] fs.protected_symlinks = 1 [2025-09-24 00:26:11.023] kernel.modules_disabled = 1 [2025-09-24 00:26:11.231] [2025-09-24 00:26:11.231] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:26:12.614] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:26:20.390] SBL1:1210.0.1.0 [2025-09-24 00:26:20.438] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:26:22.005] SBL2:1210.0.1.0 [2025-09-24 00:26:22.053] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:26:22.149] j-A [2025-09-24 00:26:29.505] The R5 Autosar Classic is running [2025-09-24 00:26:29.528] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:26:29.528] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:26:30.135] INIT: version 2.96 booting [2025-09-24 00:26:30.247] INIT: Entering runlevel: 5 [2025-09-24 00:26:30.407] mtd24 attached [2025-09-24 00:26:30.407] mtd28 attached [2025-09-24 00:26:30.423] mtd32 attached [2025-09-24 00:26:30.472] ubi0:textures is mounted. [2025-09-24 00:26:30.472] RTNETLINK answers: File exists [2025-09-24 00:26:30.513] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:26:30.513] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:26:30.513] ubi1:animations is mounted. [2025-09-24 00:26:30.513] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:26:30.513] ubi2:dml_code is mounted. [2025-09-24 00:26:30.513] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:26:30.513] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:26:30.535] data.LB_FadeInType0=100 [2025-09-24 00:26:30.535] data.CHLH_FadeInType0=0 [2025-09-24 00:26:30.535] data.WU_FadeInDelay=0 [2025-09-24 00:26:30.535] max_time_out=0 [2025-09-24 00:26:30.535] No splash screen [2025-09-24 00:26:30.535] stop dss Done [2025-09-24 00:26:30.551] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:26:30.567] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:26:30.609] /dev/mem opened. [2025-09-24 00:26:30.609] Memory mapped at address 0xffffb81df000. [2025-09-24 00:26:30.609] Read at address 0x00600018 (0xffffb81df018): 0x00000000 [2025-09-24 00:26:30.609] Write at address 0x00600018 (0xffffb81df018): 0x00400040, readback 0x00400040 [2025-09-24 00:26:30.849] Loaded PowerVR consumer services. [2025-09-24 00:26:30.896] Waiting data available... [2025-09-24 00:26:30.896] 512+0 records in [2025-09-24 00:26:30.913] 512+0 records out [2025-09-24 00:26:30.945] Starting syslogd/klogd: done [2025-09-24 00:26:30.961] DML Start [2025-09-24 00:26:31.137] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:26:31.345] DML res1: 0 [2025-09-24 00:26:31.809] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:26:31.830] Read Success [2025-09-24 00:26:31.830] Verifying certificate... [2025-09-24 00:26:32.133] Verified OK [2025-09-24 00:26:32.165] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:26:33.945] Verified OK [2025-09-24 00:26:33.945] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:26:34.464] Verified OK [2025-09-24 00:26:34.464] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:26:36.910] fs.protected_hardlinks = 1 [2025-09-24 00:26:36.910] fs.protected_symlinks = 1 [2025-09-24 00:26:36.926] kernel.modules_disabled = 1 [2025-09-24 00:26:37.118] [2025-09-24 00:26:37.118] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:26:38.364] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:26:46.172] SBL1:1210.0.1.0 [2025-09-24 00:26:46.220] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:26:47.787] SBL2:1210.0.1.0 [2025-09-24 00:26:47.835] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:26:47.930] j-A [2025-09-24 00:26:55.286] The R5 Autosar Classic is running [2025-09-24 00:26:55.308] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:26:55.308] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:26:55.915] INIT: version 2.96 booting [2025-09-24 00:26:56.027] INIT: Entering runlevel: 5 [2025-09-24 00:26:56.187] mtd24 attached [2025-09-24 00:26:56.187] mtd28 attached [2025-09-24 00:26:56.203] mtd32 attached [2025-09-24 00:26:56.235] ubi0:textures is mounted. [2025-09-24 00:26:56.251] ubi1:animations is mounted. [2025-09-24 00:26:56.311] RTNETLINK answers: File exists [2025-09-24 00:26:56.311] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:26:56.311] ubi2:dml_code is mounted. [2025-09-24 00:26:56.311] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:26:56.311] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:26:56.311] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:26:56.311] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:26:56.311] data.LB_FadeInType0=100 [2025-09-24 00:26:56.311] data.CHLH_FadeInType0=0 [2025-09-24 00:26:56.311] data.WU_FadeInDelay=0 [2025-09-24 00:26:56.311] max_time_out=0 [2025-09-24 00:26:56.311] No splash screen [2025-09-24 00:26:56.311] stop dss Done [2025-09-24 00:26:56.359] /dev/mem opened. [2025-09-24 00:26:56.359] Memory mapped at address 0xffffac8e2000. [2025-09-24 00:26:56.396] Read at address 0x00600018 (0xffffac8e2018): 0x00000000 [2025-09-24 00:26:56.396] Write at address 0x00600018 (0xffffac8e2018): 0x00400040, readback 0x00400040 [2025-09-24 00:26:56.396] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:26:56.412] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:26:56.556] Loaded PowerVR consumer services. [2025-09-24 00:26:56.668] Waiting data available... [2025-09-24 00:26:56.684] 512+0 records in [2025-09-24 00:26:56.684] 512+0 records out [2025-09-24 00:26:56.699] Starting syslogd/klogd: done [2025-09-24 00:26:56.731] DML Start [2025-09-24 00:26:56.908] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:26:57.099] DML res1: 0 [2025-09-24 00:26:57.560] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:26:57.560] Read Success [2025-09-24 00:26:57.560] Verifying certificate... [2025-09-24 00:26:57.848] Verified OK [2025-09-24 00:26:57.880] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:26:59.591] Verified OK [2025-09-24 00:26:59.591] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:27:00.241] Verified OK [2025-09-24 00:27:00.241] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:27:02.767] fs.protected_hardlinks = 1 [2025-09-24 00:27:02.767] fs.protected_symlinks = 1 [2025-09-24 00:27:02.783] kernel.modules_disabled = 1 [2025-09-24 00:27:02.991] [2025-09-24 00:27:02.991] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:27:04.149] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:27:11.946] SBL1:1210.0.1.0 [2025-09-24 00:27:11.994] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:27:13.561] SBL2:1210.0.1.0 [2025-09-24 00:27:13.593] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:27:13.705] j-A [2025-09-24 00:27:21.059] The R5 Autosar Classic is running [2025-09-24 00:27:21.059] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:27:21.080] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:27:21.688] INIT: version 2.96 booting [2025-09-24 00:27:21.799] INIT: Entering runlevel: 5 [2025-09-24 00:27:21.943] mtd24 attached [2025-09-24 00:27:21.959] mtd28 attached [2025-09-24 00:27:21.975] mtd32 attached [2025-09-24 00:27:21.991] ubi0:textures is mounted. [2025-09-24 00:27:22.023] ubi1:animations is mounted. [2025-09-24 00:27:22.023] RTNETLINK answers: File exists [2025-09-24 00:27:22.075] ubi2:dml_code is mounted. [2025-09-24 00:27:22.075] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:27:22.075] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:27:22.075] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:27:22.075] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:27:22.075] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:27:22.075] data.LB_FadeInType0=100 [2025-09-24 00:27:22.075] data.CHLH_FadeInType0=0 [2025-09-24 00:27:22.075] data.WU_FadeInDelay=0 [2025-09-24 00:27:22.075] max_time_out=0 [2025-09-24 00:27:22.075] No splash screen [2025-09-24 00:27:22.075] stop dss Done [2025-09-24 00:27:22.147] /dev/mem opened. [2025-09-24 00:27:22.147] Memory mapped at address 0xffff91066000. [2025-09-24 00:27:22.147] Read at address 0x00600018 (0xffff91066018): 0x00000000 [2025-09-24 00:27:22.147] Write at address 0x00600018 (0xffff91066018): 0x00400040, readback 0x00400040 [2025-09-24 00:27:22.147] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:27:22.163] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:27:22.386] Loaded PowerVR consumer services. [2025-09-24 00:27:22.418] Waiting data available... [2025-09-24 00:27:22.434] 512+0 records in [2025-09-24 00:27:22.434] 512+0 records out [2025-09-24 00:27:22.466] Starting syslogd/klogd: done [2025-09-24 00:27:22.498] DML Start [2025-09-24 00:27:22.659] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:27:22.882] DML res1: 0 [2025-09-24 00:27:23.382] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:27:23.382] Read Success [2025-09-24 00:27:23.382] Verifying certificate... [2025-09-24 00:27:23.623] Verified OK [2025-09-24 00:27:23.638] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:27:25.254] Verified OK [2025-09-24 00:27:25.269] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:27:25.893] Verified OK [2025-09-24 00:27:25.893] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:27:28.562] fs.protected_hardlinks = 1 [2025-09-24 00:27:28.579] fs.protected_symlinks = 1 [2025-09-24 00:27:28.579] kernel.modules_disabled = 1 [2025-09-24 00:27:28.770] [2025-09-24 00:27:28.770] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:27:29.986] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:27:37.735] SBL1:1210.0.1.0 [2025-09-24 00:27:37.783] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:27:39.351] SBL2:1210.0.1.0 [2025-09-24 00:27:39.382] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:27:39.494] j-A [2025-09-24 00:27:46.848] The R5 Autosar Classic is running [2025-09-24 00:27:46.848] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:27:46.869] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:27:47.476] INIT: version 2.96 booting [2025-09-24 00:27:47.589] INIT: Entering runlevel: 5 [2025-09-24 00:27:47.748] mtd28 attached [2025-09-24 00:27:47.748] mtd32 attached [2025-09-24 00:27:47.764] mtd24 attached [2025-09-24 00:27:47.796] ubi0:animations is mounted. [2025-09-24 00:27:47.813] RTNETLINK answers: File exists [2025-09-24 00:27:47.869] ubi2:textures is mounted. [2025-09-24 00:27:47.869] ubi1:dml_code is mounted. [2025-09-24 00:27:47.869] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:27:47.869] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:27:47.869] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:27:47.869] data.LB_FadeInType0=100 [2025-09-24 00:27:47.869] data.CHLH_FadeInType0=0 [2025-09-24 00:27:47.869] data.WU_FadeInDelay=0 [2025-09-24 00:27:47.869] max_time_out=0 [2025-09-24 00:27:47.869] No splash screen [2025-09-24 00:27:47.869] stop dss Done [2025-09-24 00:27:47.869] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:27:47.869] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:27:47.900] /dev/mem opened. [2025-09-24 00:27:47.900] Memory mapped at address 0xffffb5d37000. [2025-09-24 00:27:47.926] Read at address 0x00600018 (0xffffb5d37018): 0x00000000 [2025-09-24 00:27:47.926] Write at address 0x00600018 (0xffffb5d37018): 0x00400040, readback 0x00400040 [2025-09-24 00:27:47.969] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:27:47.969] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:27:48.065] Loaded PowerVR consumer services. [2025-09-24 00:27:48.193] Waiting data available... [2025-09-24 00:27:48.209] 512+0 records in [2025-09-24 00:27:48.209] 512+0 records out [2025-09-24 00:27:48.257] Starting syslogd/klogd: done [2025-09-24 00:27:48.273] DML Start [2025-09-24 00:27:48.449] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:27:48.705] DML res1: 0 [2025-09-24 00:27:49.072] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:27:49.093] Read Success [2025-09-24 00:27:49.093] Verifying certificate... [2025-09-24 00:27:49.349] Verified OK [2025-09-24 00:27:49.349] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:27:50.821] Verified OK [2025-09-24 00:27:50.821] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:27:51.484] Verified OK [2025-09-24 00:27:51.484] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:27:54.346] fs.protected_hardlinks = 1 [2025-09-24 00:27:54.346] fs.protected_symlinks = 1 [2025-09-24 00:27:54.362] kernel.modules_disabled = 1 [2025-09-24 00:27:54.554] [2025-09-24 00:27:54.554] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:27:55.774] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:28:03.541] SBL1:1210.0.1.0 [2025-09-24 00:28:03.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:28:05.156] SBL2:1210.0.1.0 [2025-09-24 00:28:05.204] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:28:05.300] j-A [2025-09-24 00:28:12.653] The R5 Autosar Classic is running [2025-09-24 00:28:12.679] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:28:12.679] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:28:13.286] INIT: version 2.96 booting [2025-09-24 00:28:13.398] INIT: Entering runlevel: 5 [2025-09-24 00:28:13.542] mtd28 attached [2025-09-24 00:28:13.558] mtd32 attached [2025-09-24 00:28:13.574] mtd24 attached [2025-09-24 00:28:13.677] RTNETLINK answers: File exists [2025-09-24 00:28:13.677] ubi0:animations is mounted. [2025-09-24 00:28:13.677] ubi1:dml_code is mounted. [2025-09-24 00:28:13.677] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:28:13.677] ubi2:textures is mounted. [2025-09-24 00:28:13.677] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:28:13.677] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:28:13.677] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:28:13.677] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:28:13.677] data.LB_FadeInType0=100 [2025-09-24 00:28:13.677] data.CHLH_FadeInType0=0 [2025-09-24 00:28:13.677] data.WU_FadeInDelay=0 [2025-09-24 00:28:13.677] max_time_out=0 [2025-09-24 00:28:13.677] No splash screen [2025-09-24 00:28:13.677] stop dss Done [2025-09-24 00:28:13.747] /dev/mem opened. [2025-09-24 00:28:13.748] Memory mapped at address 0xffff8779e000. [2025-09-24 00:28:13.748] Read at address 0x00600018 (0xffff8779e018): 0x00000000 [2025-09-24 00:28:13.748] Write at address 0x00600018 (0xffff8779e018): 0x00400040, readback 0x00400040 [2025-09-24 00:28:13.763] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:28:13.779] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:28:13.939] Loaded PowerVR consumer services. [2025-09-24 00:28:14.019] 512+0 records in [2025-09-24 00:28:14.019] 512+0 records out [2025-09-24 00:28:14.035] Waiting data available... [2025-09-24 00:28:14.051] Starting syslogd/klogd: done [2025-09-24 00:28:14.068] DML Start [2025-09-24 00:28:14.275] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:28:14.515] DML res1: 0 [2025-09-24 00:28:14.883] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:28:14.899] Read Success [2025-09-24 00:28:14.899] Verifying certificate... [2025-09-24 00:28:15.122] Verified OK [2025-09-24 00:28:15.138] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:28:16.785] Verified OK [2025-09-24 00:28:16.785] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:28:17.309] Verified OK [2025-09-24 00:28:17.309] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:28:20.011] fs.protected_hardlinks = 1 [2025-09-24 00:28:20.011] fs.protected_symlinks = 1 [2025-09-24 00:28:20.027] kernel.modules_disabled = 1 [2025-09-24 00:28:20.203] [2025-09-24 00:28:20.203] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:28:21.576] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:28:29.324] SBL1:1210.0.1.0 [2025-09-24 00:28:29.372] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:28:30.940] SBL2:1210.0.1.0 [2025-09-24 00:28:30.987] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:28:31.083] j-A [2025-09-24 00:28:38.437] The R5 Autosar Classic is running [2025-09-24 00:28:38.462] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:28:38.462] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:28:39.069] INIT: version 2.96 booting [2025-09-24 00:28:39.181] INIT: Entering runlevel: 5 [2025-09-24 00:28:39.340] mtd24 attached [2025-09-24 00:28:39.340] mtd28 attached [2025-09-24 00:28:39.372] mtd32 attached [2025-09-24 00:28:39.388] ubi0:textures is mounted. [2025-09-24 00:28:39.470] RTNETLINK answers: File exists [2025-09-24 00:28:39.470] ubi1:animations is mounted. [2025-09-24 00:28:39.470] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:28:39.470] ubi2:dml_code is mounted. [2025-09-24 00:28:39.470] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:28:39.470] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:28:39.470] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:28:39.470] data.LB_FadeInType0=100 [2025-09-24 00:28:39.470] data.CHLH_FadeInType0=0 [2025-09-24 00:28:39.470] data.WU_FadeInDelay=0 [2025-09-24 00:28:39.470] max_time_out=0 [2025-09-24 00:28:39.470] No splash screen [2025-09-24 00:28:39.470] stop dss Done [2025-09-24 00:28:39.470] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:28:39.538] /dev/mem opened. [2025-09-24 00:28:39.538] Memory mapped at address 0xffff9565e000. [2025-09-24 00:28:39.538] Read at address 0x00600018 (0xffff9565e018): 0x00000000 [2025-09-24 00:28:39.538] Write at address 0x00600018 (0xffff9565e018): 0x00400040, readback 0x00400040 [2025-09-24 00:28:39.554] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:28:39.570] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:28:39.778] Loaded PowerVR consumer services. [2025-09-24 00:28:39.794] Waiting data available... [2025-09-24 00:28:39.826] 512+0 records in [2025-09-24 00:28:39.826] 512+0 records out [2025-09-24 00:28:39.841] Starting syslogd/klogd: done [2025-09-24 00:28:39.857] DML Start [2025-09-24 00:28:40.050] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:28:40.258] DML res1: 0 [2025-09-24 00:28:40.702] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:28:40.702] Read Success [2025-09-24 00:28:40.702] Verifying certificate... [2025-09-24 00:28:40.988] Verified OK [2025-09-24 00:28:40.988] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:28:42.801] Verified OK [2025-09-24 00:28:42.801] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:28:43.356] Verified OK [2025-09-24 00:28:43.356] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:28:45.899] fs.protected_hardlinks = 1 [2025-09-24 00:28:45.915] fs.protected_symlinks = 1 [2025-09-24 00:28:45.915] kernel.modules_disabled = 1 [2025-09-24 00:28:46.123] [2025-09-24 00:28:46.123] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:28:47.316] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:28:55.123] SBL1:1210.0.1.0 [2025-09-24 00:28:55.171] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:28:56.738] SBL2:1210.0.1.0 [2025-09-24 00:28:56.785] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:28:56.882] j-A [2025-09-24 00:29:04.237] The R5 Autosar Classic is running [2025-09-24 00:29:04.262] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:29:04.262] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:29:04.868] INIT: version 2.96 booting [2025-09-24 00:29:04.997] INIT: Entering runlevel: 5 [2025-09-24 00:29:05.140] mtd24 attached [2025-09-24 00:29:05.156] mtd28 attached [2025-09-24 00:29:05.172] mtd32 attached [2025-09-24 00:29:05.275] RTNETLINK answers: File exists [2025-09-24 00:29:05.275] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:29:05.275] ubi0:textures is mounted. [2025-09-24 00:29:05.275] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:29:05.275] ubi1:animations is mounted. [2025-09-24 00:29:05.275] ubi2:dml_code is mounted. [2025-09-24 00:29:05.275] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:29:05.275] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:29:05.275] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:29:05.275] data.LB_FadeInType0=100 [2025-09-24 00:29:05.275] data.CHLH_FadeInType0=0 [2025-09-24 00:29:05.275] data.WU_FadeInDelay=0 [2025-09-24 00:29:05.275] max_time_out=0 [2025-09-24 00:29:05.275] No splash screen [2025-09-24 00:29:05.275] stop dss Done [2025-09-24 00:29:05.307] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:29:05.323] /dev/mem opened. [2025-09-24 00:29:05.355] Memory mapped at address 0xffffbeeda000. [2025-09-24 00:29:05.355] Read at address 0x00600018 (0xffffbeeda018): 0x00000000 [2025-09-24 00:29:05.355] Write at address 0x00600018 (0xffffbeeda018): 0x00400040, readback 0x00400040 [2025-09-24 00:29:05.355] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:29:05.483] Loaded PowerVR consumer services. [2025-09-24 00:29:05.611] Waiting data available... [2025-09-24 00:29:05.611] 512+0 records in [2025-09-24 00:29:05.611] 512+0 records out [2025-09-24 00:29:05.643] Starting syslogd/klogd: done [2025-09-24 00:29:05.659] DML Start [2025-09-24 00:29:05.803] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:29:06.075] DML res1: 0 [2025-09-24 00:29:06.502] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:29:06.502] Read Success [2025-09-24 00:29:06.502] Verifying certificate... [2025-09-24 00:29:06.742] Verified OK [2025-09-24 00:29:06.758] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:29:08.447] Verified OK [2025-09-24 00:29:08.447] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:29:09.013] Verified OK [2025-09-24 00:29:09.013] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:29:11.619] fs.protected_hardlinks = 1 [2025-09-24 00:29:11.619] fs.protected_symlinks = 1 [2025-09-24 00:29:11.635] kernel.modules_disabled = 1 [2025-09-24 00:29:11.842] [2025-09-24 00:29:11.842] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:29:13.116] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:29:20.940] SBL1:1210.0.1.0 [2025-09-24 00:29:20.971] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:29:22.555] SBL2:1210.0.1.0 [2025-09-24 00:29:22.586] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:29:22.698] j-A [2025-09-24 00:29:30.072] The R5 Autosar Classic is running [2025-09-24 00:29:30.072] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:29:30.072] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:29:30.680] INIT: version 2.96 booting [2025-09-24 00:29:30.792] INIT: Entering runlevel: 5 [2025-09-24 00:29:30.952] mtd24 attached [2025-09-24 00:29:30.952] mtd28 attached [2025-09-24 00:29:30.968] mtd32 attached [2025-09-24 00:29:31.016] ubi0:textures is mounted. [2025-09-24 00:29:31.016] RTNETLINK answers: File exists [2025-09-24 00:29:31.058] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:29:31.058] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:29:31.058] ubi2:dml_code is mounted. [2025-09-24 00:29:31.058] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:29:31.058] ubi1:animations is mounted. [2025-09-24 00:29:31.058] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:29:31.058] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:29:31.082] data.LB_FadeInType0=100 [2025-09-24 00:29:31.082] data.CHLH_FadeInType0=0 [2025-09-24 00:29:31.082] data.WU_FadeInDelay=0 [2025-09-24 00:29:31.082] max_time_out=0 [2025-09-24 00:29:31.082] No splash screen [2025-09-24 00:29:31.082] stop dss Done [2025-09-24 00:29:31.114] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:29:31.151] /dev/mem opened. [2025-09-24 00:29:31.151] Memory mapped at address 0xffff9fab6000. [2025-09-24 00:29:31.151] Read at address 0x00600018 (0xffff9fab6018): 0x00000000 [2025-09-24 00:29:31.151] Write at address 0x00600018 (0xffff9fab6018): 0x00400040, readback 0x00400040 [2025-09-24 00:29:31.151] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:29:31.246] Loaded PowerVR consumer services. [2025-09-24 00:29:31.406] Waiting data available... [2025-09-24 00:29:31.423] 512+0 records in [2025-09-24 00:29:31.423] 512+0 records out [2025-09-24 00:29:31.455] Starting syslogd/klogd: done [2025-09-24 00:29:31.471] DML Start [2025-09-24 00:29:31.646] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:29:31.870] DML res1: 0 [2025-09-24 00:29:32.302] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:29:32.323] Read Success [2025-09-24 00:29:32.323] Verifying certificate... [2025-09-24 00:29:32.547] Verified OK [2025-09-24 00:29:32.563] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:29:34.209] Verified OK [2025-09-24 00:29:34.209] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:29:34.864] Verified OK [2025-09-24 00:29:34.864] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:29:37.565] fs.protected_hardlinks = 1 [2025-09-24 00:29:37.565] fs.protected_symlinks = 1 [2025-09-24 00:29:37.565] kernel.modules_disabled = 1 [2025-09-24 00:29:37.757] [2025-09-24 00:29:37.757] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:29:38.923] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:29:46.735] SBL1:1210.0.1.0 [2025-09-24 00:29:46.783] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:29:48.350] SBL2:1210.0.1.0 [2025-09-24 00:29:48.397] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:29:48.494] j-A [2025-09-24 00:29:55.867] The R5 Autosar Classic is running [2025-09-24 00:29:55.867] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:29:55.867] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:29:56.475] INIT: version 2.96 booting [2025-09-24 00:29:56.587] INIT: Entering runlevel: 5 [2025-09-24 00:29:56.731] mtd28 attached [2025-09-24 00:29:56.747] mtd32 attached [2025-09-24 00:29:56.747] mtd24 attached [2025-09-24 00:29:56.810] ubi0:animations is mounted. [2025-09-24 00:29:56.810] RTNETLINK answers: File exists [2025-09-24 00:29:56.848] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:29:56.848] ubi1:dml_code is mounted. [2025-09-24 00:29:56.848] ubi2:textures is mounted. [2025-09-24 00:29:56.848] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:29:56.848] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:29:56.848] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:29:56.848] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:29:56.877] data.LB_FadeInType0=100 [2025-09-24 00:29:56.877] data.CHLH_FadeInType0=0 [2025-09-24 00:29:56.877] data.WU_FadeInDelay=0 [2025-09-24 00:29:56.877] max_time_out=0 [2025-09-24 00:29:56.877] No splash screen [2025-09-24 00:29:56.877] stop dss Done [2025-09-24 00:29:56.951] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:29:56.951] /dev/mem opened. [2025-09-24 00:29:56.951] Memory mapped at address 0xffff804aa000. [2025-09-24 00:29:56.951] Read at address 0x00600018 (0xffff804aa018): 0x00000000 [2025-09-24 00:29:56.951] Write at address 0x00600018 (0xffff804aa018): 0x00400040, readback 0x00400040 [2025-09-24 00:29:56.951] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:29:57.175] Loaded PowerVR consumer services. [2025-09-24 00:29:57.190] Waiting data available... [2025-09-24 00:29:57.206] 512+0 records in [2025-09-24 00:29:57.206] 512+0 records out [2025-09-24 00:29:57.254] Starting syslogd/klogd: done [2025-09-24 00:29:57.286] DML Start [2025-09-24 00:29:57.446] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:29:57.654] DML res1: 0 [2025-09-24 00:29:58.118] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:29:58.139] Read Success [2025-09-24 00:29:58.139] Verifying certificate... [2025-09-24 00:29:58.395] Verified OK [2025-09-24 00:29:58.411] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:29:59.966] Verified OK [2025-09-24 00:29:59.966] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:30:00.553] Verified OK [2025-09-24 00:30:00.553] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:30:03.366] fs.protected_hardlinks = 1 [2025-09-24 00:30:03.366] fs.protected_symlinks = 1 [2025-09-24 00:30:03.382] kernel.modules_disabled = 1 [2025-09-24 00:30:03.558] [2025-09-24 00:30:03.558] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:30:04.789] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:30:12.521] SBL1:1210.0.1.0 [2025-09-24 00:30:12.569] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:30:14.136] SBL2:1210.0.1.0 [2025-09-24 00:30:14.184] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:30:14.295] j-A [2025-09-24 00:30:21.636] The R5 Autosar Classic is running [2025-09-24 00:30:21.661] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:30:21.661] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:30:22.268] INIT: version 2.96 booting [2025-09-24 00:30:22.380] INIT: Entering runlevel: 5 [2025-09-24 00:30:22.540] mtd24 attached [2025-09-24 00:30:22.540] mtd28 attached [2025-09-24 00:30:22.572] mtd32 attached [2025-09-24 00:30:22.588] ubi0:textures is mounted. [2025-09-24 00:30:22.604] ubi1:animations is mounted. [2025-09-24 00:30:22.676] RTNETLINK answers: File exists [2025-09-24 00:30:22.676] ubi2:dml_code is mounted. [2025-09-24 00:30:22.676] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:30:22.676] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:30:22.676] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:30:22.676] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:30:22.676] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:30:22.676] data.LB_FadeInType0=100 [2025-09-24 00:30:22.676] data.CHLH_FadeInType0=0 [2025-09-24 00:30:22.676] data.WU_FadeInDelay=0 [2025-09-24 00:30:22.676] max_time_out=0 [2025-09-24 00:30:22.676] No splash screen [2025-09-24 00:30:22.676] stop dss Done [2025-09-24 00:30:22.708] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:30:22.724] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:30:22.755] /dev/mem opened. [2025-09-24 00:30:22.755] Memory mapped at address 0xffffb7269000. [2025-09-24 00:30:22.755] Read at address 0x00600018 (0xffffb7269018): 0x00000000 [2025-09-24 00:30:22.755] Write at address 0x00600018 (0xffffb7269018): 0x00400040, readback 0x00400040 [2025-09-24 00:30:22.964] Loaded PowerVR consumer services. [2025-09-24 00:30:22.979] Waiting data available... [2025-09-24 00:30:22.996] 512+0 records in [2025-09-24 00:30:22.996] 512+0 records out [2025-09-24 00:30:23.043] Starting syslogd/klogd: done [2025-09-24 00:30:23.059] DML Start [2025-09-24 00:30:23.203] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:30:23.411] DML res1: 0 [2025-09-24 00:30:23.971] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:30:23.992] Read Success [2025-09-24 00:30:23.992] Verifying certificate... [2025-09-24 00:30:24.280] Verified OK [2025-09-24 00:30:24.296] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:30:25.986] Verified OK [2025-09-24 00:30:25.986] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:30:26.600] Verified OK [2025-09-24 00:30:26.600] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:30:29.158] fs.protected_hardlinks = 1 [2025-09-24 00:30:29.158] fs.protected_symlinks = 1 [2025-09-24 00:30:29.174] kernel.modules_disabled = 1 [2025-09-24 00:30:29.382] [2025-09-24 00:30:29.382] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:30:30.533] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:30:38.349] SBL1:1210.0.1.0 [2025-09-24 00:30:38.397] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:30:39.964] SBL2:1210.0.1.0 [2025-09-24 00:30:40.011] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:30:40.124] j-A [2025-09-24 00:30:47.463] The R5 Autosar Classic is running [2025-09-24 00:30:47.488] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:30:47.488] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:30:48.096] INIT: version 2.96 booting [2025-09-24 00:30:48.208] INIT: Entering runlevel: 5 [2025-09-24 00:30:48.368] mtd28 attached [2025-09-24 00:30:48.368] mtd24 attached [2025-09-24 00:30:48.400] mtd32 attached [2025-09-24 00:30:48.432] ubi0:animations is mounted. [2025-09-24 00:30:48.458] ubi2:dml_code is mounted. [2025-09-24 00:30:48.458] RTNETLINK answers: File exists [2025-09-24 00:30:48.458] ubi1:textures is mounted. [2025-09-24 00:30:48.509] data.LB_FadeInType0=100 [2025-09-24 00:30:48.509] data.CHLH_FadeInType0=0 [2025-09-24 00:30:48.509] data.WU_FadeInDelay=0 [2025-09-24 00:30:48.509] max_time_out=0 [2025-09-24 00:30:48.509] No splash screen [2025-09-24 00:30:48.509] stop dss Done [2025-09-24 00:30:48.509] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:30:48.509] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:30:48.509] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:30:48.509] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:30:48.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:30:48.525] /dev/mem opened. [2025-09-24 00:30:48.551] Memory mapped at address 0xffffa90a5000. [2025-09-24 00:30:48.551] Read at address 0x00600018 (0xffffa90a5018): 0x00000000 [2025-09-24 00:30:48.551] Write at address 0x00600018 (0xffffa90a5018): 0x00400040, readback 0x00400040 [2025-09-24 00:30:48.599] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:30:48.626] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:30:48.801] Loaded PowerVR consumer services. [2025-09-24 00:30:48.818] Waiting data available... [2025-09-24 00:30:48.834] 512+0 records in [2025-09-24 00:30:48.834] 512+0 records out [2025-09-24 00:30:48.898] Starting syslogd/klogd: done [2025-09-24 00:30:48.914] DML Start [2025-09-24 00:30:49.090] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:30:49.314] DML res1: 0 [2025-09-24 00:30:49.772] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:30:49.772] Read Success [2025-09-24 00:30:49.772] Verifying certificate... [2025-09-24 00:30:50.044] Verified OK [2025-09-24 00:30:50.060] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:30:51.832] Verified OK [2025-09-24 00:30:51.832] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:30:52.337] Verified OK [2025-09-24 00:30:52.337] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:30:54.782] fs.protected_hardlinks = 1 [2025-09-24 00:30:54.782] fs.protected_symlinks = 1 [2025-09-24 00:30:54.798] kernel.modules_disabled = 1 [2025-09-24 00:30:54.990] [2025-09-24 00:30:54.990] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:30:56.404] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:31:04.143] SBL1:1210.0.1.0 [2025-09-24 00:31:04.191] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:31:05.757] SBL2:1210.0.1.0 [2025-09-24 00:31:05.805] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:31:05.918] j-A [2025-09-24 00:31:13.256] The R5 Autosar Classic is running [2025-09-24 00:31:13.281] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:31:13.281] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:31:13.889] INIT: version 2.96 booting [2025-09-24 00:31:14.001] INIT: Entering runlevel: 5 [2025-09-24 00:31:14.161] mtd24 attached [2025-09-24 00:31:14.161] mtd28 attached [2025-09-24 00:31:14.177] mtd32 attached [2025-09-24 00:31:14.225] ubi0:textures is mounted. [2025-09-24 00:31:14.225] RTNETLINK answers: File exists [2025-09-24 00:31:14.288] ubi1:animations is mounted. [2025-09-24 00:31:14.288] ubi2:dml_code is mounted. [2025-09-24 00:31:14.288] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:31:14.288] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:31:14.288] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:31:14.288] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:31:14.288] data.LB_FadeInType0=100 [2025-09-24 00:31:14.288] data.CHLH_FadeInType0=0 [2025-09-24 00:31:14.288] data.WU_FadeInDelay=0 [2025-09-24 00:31:14.288] max_time_out=0 [2025-09-24 00:31:14.288] No splash screen [2025-09-24 00:31:14.288] stop dss Done [2025-09-24 00:31:14.288] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:31:14.374] /dev/mem opened. [2025-09-24 00:31:14.374] Memory mapped at address 0xffff956bc000. [2025-09-24 00:31:14.374] Read at address 0x00600018 (0xffff956bc018): 0x00000000 [2025-09-24 00:31:14.374] Write at address 0x00600018 (0xffff956bc018): 0x00400040, readback 0x00400040 [2025-09-24 00:31:14.374] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:31:14.374] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:31:14.597] Loaded PowerVR consumer services. [2025-09-24 00:31:14.645] Waiting data available... [2025-09-24 00:31:14.661] 512+0 records in [2025-09-24 00:31:14.661] 512+0 records out [2025-09-24 00:31:14.677] Starting syslogd/klogd: done [2025-09-24 00:31:14.693] DML Start [2025-09-24 00:31:14.901] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:31:15.109] DML res1: 0 [2025-09-24 00:31:15.509] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:31:15.525] Read Success [2025-09-24 00:31:15.525] Verifying certificate... [2025-09-24 00:31:15.765] Verified OK [2025-09-24 00:31:15.781] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:31:17.364] Verified OK [2025-09-24 00:31:17.364] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:31:17.988] Verified OK [2025-09-24 00:31:18.009] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:31:20.791] fs.protected_hardlinks = 1 [2025-09-24 00:31:20.807] fs.protected_symlinks = 1 [2025-09-24 00:31:20.807] kernel.modules_disabled = 1 [2025-09-24 00:31:21.015] [2025-09-24 00:31:21.015] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:31:22.194] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:31:29.963] SBL1:1210.0.1.0 [2025-09-24 00:31:30.011] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:31:31.578] SBL2:1210.0.1.0 [2025-09-24 00:31:31.626] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:31:31.722] j-A [2025-09-24 00:31:39.077] The R5 Autosar Classic is running [2025-09-24 00:31:39.098] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:31:39.098] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:31:39.706] INIT: version 2.96 booting [2025-09-24 00:31:39.817] INIT: Entering runlevel: 5 [2025-09-24 00:31:39.961] mtd24 attached [2025-09-24 00:31:39.977] mtd28 attached [2025-09-24 00:31:40.009] mtd32 attached [2025-09-24 00:31:40.025] ubi0:textures is mounted. [2025-09-24 00:31:40.041] RTNETLINK answers: File exists [2025-09-24 00:31:40.041] ubi1:animations is mounted. [2025-09-24 00:31:40.096] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:31:40.096] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:31:40.096] ubi2:dml_code is mounted. [2025-09-24 00:31:40.096] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:31:40.096] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:31:40.096] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:31:40.096] data.LB_FadeInType0=100 [2025-09-24 00:31:40.096] data.CHLH_FadeInType0=0 [2025-09-24 00:31:40.096] data.WU_FadeInDelay=0 [2025-09-24 00:31:40.096] max_time_out=0 [2025-09-24 00:31:40.096] No splash screen [2025-09-24 00:31:40.096] stop dss Done [2025-09-24 00:31:40.143] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:31:40.178] /dev/mem opened. [2025-09-24 00:31:40.178] Memory mapped at address 0xffff9e891000. [2025-09-24 00:31:40.178] Read at address 0x00600018 (0xffff9e891018): 0x00000000 [2025-09-24 00:31:40.178] Write at address 0x00600018 (0xffff9e891018): 0x00400040, readback 0x00400040 [2025-09-24 00:31:40.178] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:31:40.386] Loaded PowerVR consumer services. [2025-09-24 00:31:40.418] Waiting data available... [2025-09-24 00:31:40.450] 512+0 records in [2025-09-24 00:31:40.450] 512+0 records out [2025-09-24 00:31:40.482] Starting syslogd/klogd: done [2025-09-24 00:31:40.498] DML Start [2025-09-24 00:31:40.674] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:31:40.898] DML res1: 0 [2025-09-24 00:31:41.374] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:31:41.374] Read Success [2025-09-24 00:31:41.374] Verifying certificate... [2025-09-24 00:31:41.614] Verified OK [2025-09-24 00:31:41.630] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:31:43.358] Verified OK [2025-09-24 00:31:43.358] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:31:43.949] Verified OK [2025-09-24 00:31:43.949] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:31:46.540] fs.protected_hardlinks = 1 [2025-09-24 00:31:46.540] fs.protected_symlinks = 1 [2025-09-24 00:31:46.540] kernel.modules_disabled = 1 [2025-09-24 00:31:46.732] [2025-09-24 00:31:46.732] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:31:47.943] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:31:55.764] SBL1:1210.0.1.0 [2025-09-24 00:31:55.812] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:31:57.379] SBL2:1210.0.1.0 [2025-09-24 00:31:57.427] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:31:57.524] j-A [2025-09-24 00:32:04.878] The R5 Autosar Classic is running [2025-09-24 00:32:04.899] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:32:04.899] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:32:05.506] INIT: version 2.96 booting [2025-09-24 00:32:05.619] INIT: Entering runlevel: 5 [2025-09-24 00:32:05.778] mtd24 attached [2025-09-24 00:32:05.794] mtd32 attached [2025-09-24 00:32:05.794] mtd28 attached [2025-09-24 00:32:05.842] RTNETLINK answers: File exists [2025-09-24 00:32:05.915] ubi1:dml_code is mounted. [2025-09-24 00:32:05.915] ubi0:textures is mounted. [2025-09-24 00:32:05.915] ubi2:animations is mounted. [2025-09-24 00:32:05.915] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:32:05.915] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:32:05.915] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:32:05.915] data.LB_FadeInType0=100 [2025-09-24 00:32:05.915] data.CHLH_FadeInType0=0 [2025-09-24 00:32:05.915] data.WU_FadeInDelay=0 [2025-09-24 00:32:05.915] max_time_out=0 [2025-09-24 00:32:05.915] No splash screen [2025-09-24 00:32:05.915] stop dss Done [2025-09-24 00:32:05.915] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:32:05.915] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:32:05.947] /dev/mem opened. [2025-09-24 00:32:05.947] Memory mapped at address 0xffff95301000. [2025-09-24 00:32:05.972] Read at address 0x00600018 (0xffff95301018): 0x00000000 [2025-09-24 00:32:05.972] Write at address 0x00600018 (0xffff95301018): 0x00400040, readback 0x00400040 [2025-09-24 00:32:06.018] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:32:06.018] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:32:06.082] Loaded PowerVR consumer services. [2025-09-24 00:32:06.257] Waiting data available... [2025-09-24 00:32:06.257] 512+0 records in [2025-09-24 00:32:06.257] 512+0 records out [2025-09-24 00:32:06.305] Starting syslogd/klogd: done [2025-09-24 00:32:06.321] DML Start [2025-09-24 00:32:06.513] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:32:06.737] DML res1: 0 [2025-09-24 00:32:07.089] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:32:07.105] Read Success [2025-09-24 00:32:07.105] Verifying certificate... [2025-09-24 00:32:07.344] Verified OK [2025-09-24 00:32:07.344] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:32:08.928] Verified OK [2025-09-24 00:32:08.928] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:32:09.577] Verified OK [2025-09-24 00:32:09.577] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:32:12.327] fs.protected_hardlinks = 1 [2025-09-24 00:32:12.343] fs.protected_symlinks = 1 [2025-09-24 00:32:12.343] kernel.modules_disabled = 1 [2025-09-24 00:32:12.551] [2025-09-24 00:32:12.551] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:32:13.821] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:32:21.567] SBL1:1210.0.1.0 [2025-09-24 00:32:21.599] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:32:23.183] SBL2:1210.0.1.0 [2025-09-24 00:32:23.214] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:32:23.326] j-A [2025-09-24 00:32:30.696] The R5 Autosar Classic is running [2025-09-24 00:32:30.696] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:32:30.696] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:32:31.304] INIT: version 2.96 booting [2025-09-24 00:32:31.416] INIT: Entering runlevel: 5 [2025-09-24 00:32:31.559] mtd24 attached [2025-09-24 00:32:31.575] mtd28 attached [2025-09-24 00:32:31.591] mtd32 attached [2025-09-24 00:32:31.674] RTNETLINK answers: File exists [2025-09-24 00:32:31.674] ubi1:animations is mounted. [2025-09-24 00:32:31.674] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:32:31.674] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:32:31.674] ubi0:textures is mounted. [2025-09-24 00:32:31.674] ubi2:dml_code is mounted. [2025-09-24 00:32:31.674] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:32:31.674] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:32:31.674] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:32:31.696] data.LB_FadeInType0=100 [2025-09-24 00:32:31.696] data.CHLH_FadeInType0=0 [2025-09-24 00:32:31.696] data.WU_FadeInDelay=0 [2025-09-24 00:32:31.696] max_time_out=0 [2025-09-24 00:32:31.696] No splash screen [2025-09-24 00:32:31.696] stop dss Done [2025-09-24 00:32:31.711] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:32:31.733] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:32:31.733] /dev/mem opened. [2025-09-24 00:32:31.733] Memory mapped at address 0xffffb3a88000. [2025-09-24 00:32:31.759] Read at address 0x00600018 (0xffffb3a88018): 0x00000000 [2025-09-24 00:32:31.759] Write at address 0x00600018 (0xffffb3a88018): 0x00400040, readback 0x00400040 [2025-09-24 00:32:32.015] Loaded PowerVR consumer services. [2025-09-24 00:32:32.031] Waiting data available... [2025-09-24 00:32:32.063] 512+0 records in [2025-09-24 00:32:32.063] 512+0 records out [2025-09-24 00:32:32.095] Starting syslogd/klogd: done [2025-09-24 00:32:32.111] DML Start [2025-09-24 00:32:32.270] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:32:32.526] DML res1: 0 [2025-09-24 00:32:32.953] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:32:32.953] Read Success [2025-09-24 00:32:32.953] Verifying certificate... [2025-09-24 00:32:33.225] Verified OK [2025-09-24 00:32:33.241] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:32:34.992] Verified OK [2025-09-24 00:32:34.992] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:32:35.577] Verified OK [2025-09-24 00:32:35.577] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:32:38.167] fs.protected_hardlinks = 1 [2025-09-24 00:32:38.183] fs.protected_symlinks = 1 [2025-09-24 00:32:38.183] kernel.modules_disabled = 1 [2025-09-24 00:32:38.374] [2025-09-24 00:32:38.374] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:32:39.613] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:32:47.360] SBL1:1210.0.1.0 [2025-09-24 00:32:47.408] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:32:48.975] SBL2:1210.0.1.0 [2025-09-24 00:32:49.022] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:32:49.118] j-A [2025-09-24 00:32:56.473] The R5 Autosar Classic is running [2025-09-24 00:32:56.498] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:32:56.498] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:32:57.105] INIT: version 2.96 booting [2025-09-24 00:32:57.217] INIT: Entering runlevel: 5 [2025-09-24 00:32:57.376] mtd28 attached [2025-09-24 00:32:57.392] mtd24 attached [2025-09-24 00:32:57.408] mtd32 attached [2025-09-24 00:32:57.440] ubi0:animations is mounted. [2025-09-24 00:32:57.440] RTNETLINK answers: File exists [2025-09-24 00:32:57.509] ubi1:textures is mounted. [2025-09-24 00:32:57.509] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:32:57.509] ubi2:dml_code is mounted. [2025-09-24 00:32:57.509] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:32:57.509] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:32:57.509] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:32:57.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:32:57.509] data.LB_FadeInType0=100 [2025-09-24 00:32:57.509] data.CHLH_FadeInType0=0 [2025-09-24 00:32:57.509] data.WU_FadeInDelay=0 [2025-09-24 00:32:57.509] max_time_out=0 [2025-09-24 00:32:57.509] No splash screen [2025-09-24 00:32:57.509] stop dss Done [2025-09-24 00:32:57.541] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:32:57.578] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:32:57.578] /dev/mem opened. [2025-09-24 00:32:57.578] Memory mapped at address 0xffffaf90d000. [2025-09-24 00:32:57.578] Read at address 0x00600018 (0xffffaf90d018): 0x00000000 [2025-09-24 00:32:57.578] Write at address 0x00600018 (0xffffaf90d018): 0x00400040, readback 0x00400040 [2025-09-24 00:32:57.801] Loaded PowerVR consumer services. [2025-09-24 00:32:57.859] Waiting data available... [2025-09-24 00:32:57.859] 512+0 records in [2025-09-24 00:32:57.859] 512+0 records out [2025-09-24 00:32:57.891] Starting syslogd/klogd: done [2025-09-24 00:32:57.907] DML Start [2025-09-24 00:32:58.067] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:32:58.306] DML res1: 0 [2025-09-24 00:32:58.777] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:32:58.777] Read Success [2025-09-24 00:32:58.777] Verifying certificate... [2025-09-24 00:32:59.049] Verified OK [2025-09-24 00:32:59.065] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:33:00.722] Verified OK [2025-09-24 00:33:00.722] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:33:01.258] Verified OK [2025-09-24 00:33:01.258] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:33:03.768] fs.protected_hardlinks = 1 [2025-09-24 00:33:03.783] fs.protected_symlinks = 1 [2025-09-24 00:33:03.799] kernel.modules_disabled = 1 [2025-09-24 00:33:03.992] [2025-09-24 00:33:03.992] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:33:05.365] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:33:13.169] SBL1:1210.0.1.0 [2025-09-24 00:33:13.217] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:33:14.784] SBL2:1210.0.1.0 [2025-09-24 00:33:14.832] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:33:14.928] j-A [2025-09-24 00:33:22.282] The R5 Autosar Classic is running [2025-09-24 00:33:22.307] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:33:22.307] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:33:22.914] INIT: version 2.96 booting [2025-09-24 00:33:23.026] INIT: Entering runlevel: 5 [2025-09-24 00:33:23.186] mtd24 attached [2025-09-24 00:33:23.186] mtd28 attached [2025-09-24 00:33:23.202] mtd32 attached [2025-09-24 00:33:23.250] ubi0:textures is mounted. [2025-09-24 00:33:23.250] RTNETLINK answers: File exists [2025-09-24 00:33:23.289] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:33:23.289] ubi2:dml_code is mounted. [2025-09-24 00:33:23.289] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:33:23.289] ubi1:animations is mounted. [2025-09-24 00:33:23.289] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:33:23.289] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:33:23.289] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:33:23.318] data.LB_FadeInType0=100 [2025-09-24 00:33:23.318] data.CHLH_FadeInType0=0 [2025-09-24 00:33:23.318] data.WU_FadeInDelay=0 [2025-09-24 00:33:23.318] max_time_out=0 [2025-09-24 00:33:23.318] No splash screen [2025-09-24 00:33:23.318] stop dss Done [2025-09-24 00:33:23.350] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:33:23.383] /dev/mem opened. [2025-09-24 00:33:23.383] Memory mapped at address 0xffff9eba5000. [2025-09-24 00:33:23.383] Read at address 0x00600018 (0xffff9eba5018): 0x00000000 [2025-09-24 00:33:23.383] Write at address 0x00600018 (0xffff9eba5018): 0x00400040, readback 0x00400040 [2025-09-24 00:33:23.383] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:33:23.494] Loaded PowerVR consumer services. [2025-09-24 00:33:23.638] Waiting data available... [2025-09-24 00:33:23.654] 512+0 records in [2025-09-24 00:33:23.654] 512+0 records out [2025-09-24 00:33:23.687] Starting syslogd/klogd: done [2025-09-24 00:33:23.703] DML Start [2025-09-24 00:33:23.894] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:33:24.166] DML res1: 0 [2025-09-24 00:33:24.534] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:33:24.555] Read Success [2025-09-24 00:33:24.555] Verifying certificate... [2025-09-24 00:33:24.795] Verified OK [2025-09-24 00:33:24.811] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:33:26.422] Verified OK [2025-09-24 00:33:26.422] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:33:27.093] Verified OK [2025-09-24 00:33:27.093] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:33:29.795] fs.protected_hardlinks = 1 [2025-09-24 00:33:29.795] fs.protected_symlinks = 1 [2025-09-24 00:33:29.795] kernel.modules_disabled = 1 [2025-09-24 00:33:30.002] [2025-09-24 00:33:30.002] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:33:31.192] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:33:38.985] SBL1:1210.0.1.0 [2025-09-24 00:33:39.033] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:33:40.600] SBL2:1210.0.1.0 [2025-09-24 00:33:40.648] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:33:40.743] j-A [2025-09-24 00:33:48.099] The R5 Autosar Classic is running [2025-09-24 00:33:48.119] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:33:48.119] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:33:48.726] INIT: version 2.96 booting [2025-09-24 00:33:48.838] INIT: Entering runlevel: 5 [2025-09-24 00:33:48.982] mtd28 attached [2025-09-24 00:33:49.014] mtd32 attached [2025-09-24 00:33:49.014] mtd24 attached [2025-09-24 00:33:49.046] ubi0:animations is mounted. [2025-09-24 00:33:49.062] RTNETLINK answers: File exists [2025-09-24 00:33:49.062] ubi1:dml_code is mounted. [2025-09-24 00:33:49.119] ubi2:textures is mounted. [2025-09-24 00:33:49.119] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:33:49.119] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:33:49.119] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:33:49.119] data.LB_FadeInType0=100 [2025-09-24 00:33:49.119] data.CHLH_FadeInType0=0 [2025-09-24 00:33:49.119] data.WU_FadeInDelay=0 [2025-09-24 00:33:49.119] max_time_out=0 [2025-09-24 00:33:49.119] No splash screen [2025-09-24 00:33:49.119] stop dss Done [2025-09-24 00:33:49.119] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:33:49.119] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:33:49.193] /dev/mem opened. [2025-09-24 00:33:49.193] Memory mapped at address 0xffff90a6e000. [2025-09-24 00:33:49.193] Read at address 0x00600018 (0xffff90a6e018): 0x00000000 [2025-09-24 00:33:49.193] Write at address 0x00600018 (0xffff90a6e018): 0x00400040, readback 0x00400040 [2025-09-24 00:33:49.193] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:33:49.193] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:33:49.416] Loaded PowerVR consumer services. [2025-09-24 00:33:49.480] Waiting data available... [2025-09-24 00:33:49.496] 512+0 records in [2025-09-24 00:33:49.496] 512+0 records out [2025-09-24 00:33:49.544] Starting syslogd/klogd: done [2025-09-24 00:33:49.560] DML Start [2025-09-24 00:33:49.752] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:33:49.976] DML res1: 0 [2025-09-24 00:33:50.343] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:33:50.364] Read Success [2025-09-24 00:33:50.364] Verifying certificate... [2025-09-24 00:33:50.588] Verified OK [2025-09-24 00:33:50.588] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:33:52.323] Verified OK [2025-09-24 00:33:52.323] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:33:52.914] Verified OK [2025-09-24 00:33:52.914] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:33:55.487] fs.protected_hardlinks = 1 [2025-09-24 00:33:55.487] fs.protected_symlinks = 1 [2025-09-24 00:33:55.503] kernel.modules_disabled = 1 [2025-09-24 00:33:55.679] [2025-09-24 00:33:55.679] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:33:57.068] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:34:04.823] SBL1:1210.0.1.0 [2025-09-24 00:34:04.854] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:34:06.437] SBL2:1210.0.1.0 [2025-09-24 00:34:06.469] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:34:06.581] j-A [2025-09-24 00:34:13.954] The R5 Autosar Classic is running [2025-09-24 00:34:13.954] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:34:13.954] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:34:14.561] INIT: version 2.96 booting [2025-09-24 00:34:14.672] INIT: Entering runlevel: 5 [2025-09-24 00:34:14.833] mtd32 attached [2025-09-24 00:34:14.833] mtd24 attached [2025-09-24 00:34:14.849] mtd28 attached [2025-09-24 00:34:14.896] RTNETLINK answers: File exists [2025-09-24 00:34:14.962] ubi0:dml_code is mounted. [2025-09-24 00:34:14.962] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:34:14.962] ubi1:textures is mounted. [2025-09-24 00:34:14.962] ubi2:animations is mounted. [2025-09-24 00:34:14.962] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:34:14.962] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:34:14.962] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:34:14.962] data.LB_FadeInType0=100 [2025-09-24 00:34:14.962] data.CHLH_FadeInType0=0 [2025-09-24 00:34:14.962] data.WU_FadeInDelay=0 [2025-09-24 00:34:14.962] max_time_out=0 [2025-09-24 00:34:14.962] No splash screen [2025-09-24 00:34:14.962] stop dss Done [2025-09-24 00:34:14.962] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:34:15.048] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:34:15.048] /dev/mem opened. [2025-09-24 00:34:15.048] Memory mapped at address 0xffff80607000. [2025-09-24 00:34:15.048] Read at address 0x00600018 (0xffff80607018): 0x00000000 [2025-09-24 00:34:15.048] Write at address 0x00600018 (0xffff80607018): 0x00400040, readback 0x00400040 [2025-09-24 00:34:15.048] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:34:15.129] Loaded PowerVR consumer services. [2025-09-24 00:34:15.296] Waiting data available... [2025-09-24 00:34:15.296] 512+0 records in [2025-09-24 00:34:15.296] 512+0 records out [2025-09-24 00:34:15.328] Starting syslogd/klogd: done [2025-09-24 00:34:15.360] DML Start [2025-09-24 00:34:15.535] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:34:15.808] DML res1: 0 [2025-09-24 00:34:16.190] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:34:16.190] Read Success [2025-09-24 00:34:16.190] Verifying certificate... [2025-09-24 00:34:16.445] Verified OK [2025-09-24 00:34:16.461] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:34:18.305] Verified OK [2025-09-24 00:34:18.305] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:34:18.766] Verified OK [2025-09-24 00:34:18.766] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:34:21.212] fs.protected_hardlinks = 1 [2025-09-24 00:34:21.212] fs.protected_symlinks = 1 [2025-09-24 00:34:21.228] kernel.modules_disabled = 1 [2025-09-24 00:34:21.435] [2025-09-24 00:34:21.435] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:34:22.851] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:34:30.641] SBL1:1210.0.1.0 [2025-09-24 00:34:30.673] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:34:32.257] SBL2:1210.0.1.0 [2025-09-24 00:34:32.289] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:34:32.400] j-A [2025-09-24 00:34:39.739] The R5 Autosar Classic is running [2025-09-24 00:34:39.771] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:34:39.771] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:34:40.379] INIT: version 2.96 booting [2025-09-24 00:34:40.490] INIT: Entering runlevel: 5 [2025-09-24 00:34:40.650] mtd32 attached [2025-09-24 00:34:40.666] mtd28 attached [2025-09-24 00:34:40.666] mtd24 attached [2025-09-24 00:34:40.714] ubi0:dml_code is mounted. [2025-09-24 00:34:40.714] RTNETLINK answers: File exists [2025-09-24 00:34:40.776] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:34:40.776] ubi1:animations is mounted. [2025-09-24 00:34:40.776] ubi2:textures is mounted. [2025-09-24 00:34:40.776] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:34:40.776] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:34:40.776] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:34:40.776] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:34:40.776] data.LB_FadeInType0=100 [2025-09-24 00:34:40.776] data.CHLH_FadeInType0=0 [2025-09-24 00:34:40.776] data.WU_FadeInDelay=0 [2025-09-24 00:34:40.776] max_time_out=0 [2025-09-24 00:34:40.776] No splash screen [2025-09-24 00:34:40.776] stop dss Done [2025-09-24 00:34:40.824] /dev/mem opened. [2025-09-24 00:34:40.850] Memory mapped at address 0xffff92693000. [2025-09-24 00:34:40.850] Read at address 0x00600018 (0xffff92693018): 0x00000000 [2025-09-24 00:34:40.850] Write at address 0x00600018 (0xffff92693018): 0x00400040, readback 0x00400040 [2025-09-24 00:34:40.882] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:34:40.898] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:34:41.011] Loaded PowerVR consumer services. [2025-09-24 00:34:41.106] Waiting data available... [2025-09-24 00:34:41.138] 512+0 records in [2025-09-24 00:34:41.138] 512+0 records out [2025-09-24 00:34:41.170] Starting syslogd/klogd: done [2025-09-24 00:34:41.202] DML Start [2025-09-24 00:34:41.378] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:34:41.601] DML res1: 0 [2025-09-24 00:34:42.040] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:34:42.040] Read Success [2025-09-24 00:34:42.040] Verifying certificate... [2025-09-24 00:34:42.263] Verified OK [2025-09-24 00:34:42.279] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:34:43.900] Verified OK [2025-09-24 00:34:43.900] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:34:44.427] Verified OK [2025-09-24 00:34:44.427] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:34:47.113] fs.protected_hardlinks = 1 [2025-09-24 00:34:47.113] fs.protected_symlinks = 1 [2025-09-24 00:34:47.128] kernel.modules_disabled = 1 [2025-09-24 00:34:47.304] [2025-09-24 00:34:47.304] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:34:48.639] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:34:56.453] SBL1:1210.0.1.0 [2025-09-24 00:34:56.485] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:34:58.068] SBL2:1210.0.1.0 [2025-09-24 00:34:58.099] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:34:58.211] j-A [2025-09-24 00:35:05.587] The R5 Autosar Classic is running [2025-09-24 00:35:05.587] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:35:05.587] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:35:06.195] INIT: version 2.96 booting [2025-09-24 00:35:06.291] INIT: Entering runlevel: 5 [2025-09-24 00:35:06.450] mtd24 attached [2025-09-24 00:35:06.466] mtd32 attached [2025-09-24 00:35:06.466] mtd28 attached [2025-09-24 00:35:06.482] ubi0:textures is mounted. [2025-09-24 00:35:06.581] RTNETLINK answers: File exists [2025-09-24 00:35:06.581] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:35:06.581] ubi1:dml_code is mounted. [2025-09-24 00:35:06.581] ubi2:animations is mounted. [2025-09-24 00:35:06.581] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:35:06.581] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:35:06.581] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:35:06.581] data.LB_FadeInType0=100 [2025-09-24 00:35:06.581] data.CHLH_FadeInType0=0 [2025-09-24 00:35:06.581] data.WU_FadeInDelay=0 [2025-09-24 00:35:06.581] max_time_out=0 [2025-09-24 00:35:06.581] No splash screen [2025-09-24 00:35:06.581] stop dss Done [2025-09-24 00:35:06.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:35:06.613] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:35:06.649] /dev/mem opened. [2025-09-24 00:35:06.649] Memory mapped at address 0xffff9da16000. [2025-09-24 00:35:06.649] Read at address 0x00600018 (0xffff9da16018): 0x00000000 [2025-09-24 00:35:06.649] Write at address 0x00600018 (0xffff9da16018): 0x00400040, readback 0x00400040 [2025-09-24 00:35:06.649] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:35:06.825] Loaded PowerVR consumer services. [2025-09-24 00:35:06.921] Waiting data available... [2025-09-24 00:35:06.937] 512+0 records in [2025-09-24 00:35:06.937] 512+0 records out [2025-09-24 00:35:06.969] Starting syslogd/klogd: done [2025-09-24 00:35:07.001] DML Start [2025-09-24 00:35:07.177] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:35:07.417] DML res1: 0 [2025-09-24 00:35:07.784] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:35:07.801] Read Success [2025-09-24 00:35:07.801] Verifying certificate... [2025-09-24 00:35:08.040] Verified OK [2025-09-24 00:35:08.056] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:35:09.732] Verified OK [2025-09-24 00:35:09.732] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:35:10.367] Verified OK [2025-09-24 00:35:10.367] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:35:13.020] fs.protected_hardlinks = 1 [2025-09-24 00:35:13.020] fs.protected_symlinks = 1 [2025-09-24 00:35:13.036] kernel.modules_disabled = 1 [2025-09-24 00:35:13.228] [2025-09-24 00:35:13.228] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:35:14.507] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:35:22.250] SBL1:1210.0.1.0 [2025-09-24 00:35:22.298] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:35:23.864] SBL2:1210.0.1.0 [2025-09-24 00:35:23.912] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:35:24.009] j-A [2025-09-24 00:35:31.364] The R5 Autosar Classic is running [2025-09-24 00:35:31.387] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:35:31.387] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:35:31.994] INIT: version 2.96 booting [2025-09-24 00:35:32.106] INIT: Entering runlevel: 5 [2025-09-24 00:35:32.266] mtd28 attached [2025-09-24 00:35:32.266] mtd24 attached [2025-09-24 00:35:32.282] mtd32 attached [2025-09-24 00:35:32.330] RTNETLINK answers: File exists [2025-09-24 00:35:32.330] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:35:32.368] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:35:32.368] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:35:32.368] ubi0:animations is mounted. [2025-09-24 00:35:32.368] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:35:32.368] ubi1:textures is mounted. [2025-09-24 00:35:32.368] ubi2:dml_code is mounted. [2025-09-24 00:35:32.368] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:35:32.394] data.LB_FadeInType0=100 [2025-09-24 00:35:32.394] data.CHLH_FadeInType0=0 [2025-09-24 00:35:32.394] data.WU_FadeInDelay=0 [2025-09-24 00:35:32.394] max_time_out=0 [2025-09-24 00:35:32.394] No splash screen [2025-09-24 00:35:32.394] stop dss Done [2025-09-24 00:35:32.410] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:35:32.426] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:35:32.442] /dev/mem opened. [2025-09-24 00:35:32.442] Memory mapped at address 0xffff92985000. [2025-09-24 00:35:32.467] Read at address 0x00600018 (0xffff92985018): 0x00000000 [2025-09-24 00:35:32.467] Write at address 0x00600018 (0xffff92985018): 0x00400040, readback 0x00400040 [2025-09-24 00:35:32.595] Loaded PowerVR consumer services. [2025-09-24 00:35:32.723] Waiting data available... [2025-09-24 00:35:32.739] 512+0 records in [2025-09-24 00:35:32.739] 512+0 records out [2025-09-24 00:35:32.787] Starting syslogd/klogd: done [2025-09-24 00:35:32.803] DML Start [2025-09-24 00:35:32.979] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:35:33.219] DML res1: 0 [2025-09-24 00:35:33.632] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:35:33.632] Read Success [2025-09-24 00:35:33.632] Verifying certificate... [2025-09-24 00:35:33.919] Verified OK [2025-09-24 00:35:33.951] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:35:35.720] Verified OK [2025-09-24 00:35:35.720] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:35:36.296] Verified OK [2025-09-24 00:35:36.296] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:35:38.871] fs.protected_hardlinks = 1 [2025-09-24 00:35:38.887] fs.protected_symlinks = 1 [2025-09-24 00:35:38.887] kernel.modules_disabled = 1 [2025-09-24 00:35:39.094] [2025-09-24 00:35:39.094] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:35:40.293] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:35:48.079] SBL1:1210.0.1.0 [2025-09-24 00:35:48.127] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:35:49.693] SBL2:1210.0.1.0 [2025-09-24 00:35:49.725] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:35:49.838] j-A [2025-09-24 00:35:57.192] The R5 Autosar Classic is running [2025-09-24 00:35:57.192] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:35:57.213] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:35:57.820] INIT: version 2.96 booting [2025-09-24 00:35:57.933] INIT: Entering runlevel: 5 [2025-09-24 00:35:58.077] mtd24 attached [2025-09-24 00:35:58.093] mtd28 attached [2025-09-24 00:35:58.109] mtd32 attached [2025-09-24 00:35:58.124] ubi0:textures is mounted. [2025-09-24 00:35:58.156] ubi1:animations is mounted. [2025-09-24 00:35:58.156] RTNETLINK answers: File exists [2025-09-24 00:35:58.189] ubi2:dml_code is mounted. [2025-09-24 00:35:58.189] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:35:58.189] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:35:58.189] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:35:58.189] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:35:58.189] data.LB_FadeInType0=100 [2025-09-24 00:35:58.215] data.CHLH_FadeInType0=0 [2025-09-24 00:35:58.215] data.WU_FadeInDelay=0 [2025-09-24 00:35:58.215] max_time_out=0 [2025-09-24 00:35:58.215] No splash screen [2025-09-24 00:35:58.215] stop dss Done [2025-09-24 00:35:58.215] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:35:58.305] /dev/mem opened. [2025-09-24 00:35:58.305] Memory mapped at address 0xffffb8853000. [2025-09-24 00:35:58.305] Read at address 0x00600018 (0xffffb8853018): 0x00000000 [2025-09-24 00:35:58.305] Write at address 0x00600018 (0xffffb8853018): 0x00400040, readback 0x00400040 [2025-09-24 00:35:58.305] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:35:58.305] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:35:58.417] Loaded PowerVR consumer services. [2025-09-24 00:35:58.544] Waiting data available... [2025-09-24 00:35:58.560] 512+0 records in [2025-09-24 00:35:58.560] 512+0 records out [2025-09-24 00:35:58.576] Starting syslogd/klogd: done [2025-09-24 00:35:58.592] DML Start [2025-09-24 00:35:58.768] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:35:59.008] DML res1: 0 [2025-09-24 00:35:59.470] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:35:59.470] Read Success [2025-09-24 00:35:59.470] Verifying certificate... [2025-09-24 00:35:59.710] Verified OK [2025-09-24 00:35:59.726] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:36:01.350] Verified OK [2025-09-24 00:36:01.350] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:36:02.021] Verified OK [2025-09-24 00:36:02.021] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:36:04.675] fs.protected_hardlinks = 1 [2025-09-24 00:36:04.692] fs.protected_symlinks = 1 [2025-09-24 00:36:04.692] kernel.modules_disabled = 1 [2025-09-24 00:36:04.899] [2025-09-24 00:36:04.899] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:36:06.060] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:36:13.888] SBL1:1210.0.1.0 [2025-09-24 00:36:13.919] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:36:15.501] SBL2:1210.0.1.0 [2025-09-24 00:36:15.533] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:36:15.645] j-A [2025-09-24 00:36:23.017] The R5 Autosar Classic is running [2025-09-24 00:36:23.017] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:36:23.017] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:36:23.624] INIT: version 2.96 booting [2025-09-24 00:36:23.736] INIT: Entering runlevel: 5 [2025-09-24 00:36:23.879] mtd24 attached [2025-09-24 00:36:23.895] mtd28 attached [2025-09-24 00:36:23.911] mtd32 attached [2025-09-24 00:36:23.943] ubi0:textures is mounted. [2025-09-24 00:36:23.959] RTNETLINK answers: File exists [2025-09-24 00:36:23.959] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:36:24.010] ubi1:animations is mounted. [2025-09-24 00:36:24.010] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:36:24.010] ubi2:dml_code is mounted. [2025-09-24 00:36:24.010] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:36:24.010] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:36:24.010] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:36:24.010] data.LB_FadeInType0=100 [2025-09-24 00:36:24.010] data.CHLH_FadeInType0=0 [2025-09-24 00:36:24.010] data.WU_FadeInDelay=0 [2025-09-24 00:36:24.010] max_time_out=0 [2025-09-24 00:36:24.010] No splash screen [2025-09-24 00:36:24.010] stop dss Done [2025-09-24 00:36:24.042] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:36:24.057] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:36:24.093] /dev/mem opened. [2025-09-24 00:36:24.093] Memory mapped at address 0xffffa5a1b000. [2025-09-24 00:36:24.093] Read at address 0x00600018 (0xffffa5a1b018): 0x00000000 [2025-09-24 00:36:24.093] Write at address 0x00600018 (0xffffa5a1b018): 0x00400040, readback 0x00400040 [2025-09-24 00:36:24.157] Loaded PowerVR consumer services. [2025-09-24 00:36:24.349] Waiting data available... [2025-09-24 00:36:24.365] 512+0 records in [2025-09-24 00:36:24.365] 512+0 records out [2025-09-24 00:36:24.429] Starting syslogd/klogd: done [2025-09-24 00:36:24.445] DML Start [2025-09-24 00:36:24.621] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:36:24.813] DML res1: 0 [2025-09-24 00:36:25.272] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:36:25.272] Read Success [2025-09-24 00:36:25.272] Verifying certificate... [2025-09-24 00:36:25.512] Verified OK [2025-09-24 00:36:25.528] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:36:27.244] Verified OK [2025-09-24 00:36:27.244] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:36:27.816] Verified OK [2025-09-24 00:36:27.816] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:36:30.310] fs.protected_hardlinks = 1 [2025-09-24 00:36:30.310] fs.protected_symlinks = 1 [2025-09-24 00:36:30.326] kernel.modules_disabled = 1 [2025-09-24 00:36:30.534] [2025-09-24 00:36:30.534] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:36:31.910] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:36:39.676] SBL1:1210.0.1.0 [2025-09-24 00:36:39.708] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:36:41.291] SBL2:1210.0.1.0 [2025-09-24 00:36:41.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:36:41.435] j-A [2025-09-24 00:36:48.809] The R5 Autosar Classic is running [2025-09-24 00:36:48.809] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:36:48.809] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:36:49.418] INIT: version 2.96 booting [2025-09-24 00:36:49.529] INIT: Entering runlevel: 5 [2025-09-24 00:36:49.689] mtd24 attached [2025-09-24 00:36:49.689] mtd28 attached [2025-09-24 00:36:49.705] mtd32 attached [2025-09-24 00:36:49.753] RTNETLINK answers: File exists [2025-09-24 00:36:49.821] ubi0:textures is mounted. [2025-09-24 00:36:49.821] ubi1:animations is mounted. [2025-09-24 00:36:49.821] ubi2:dml_code is mounted. [2025-09-24 00:36:49.821] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:36:49.821] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:36:49.821] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:36:49.821] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:36:49.821] data.LB_FadeInType0=100 [2025-09-24 00:36:49.821] data.CHLH_FadeInType0=0 [2025-09-24 00:36:49.821] data.WU_FadeInDelay=0 [2025-09-24 00:36:49.821] max_time_out=0 [2025-09-24 00:36:49.821] No splash screen [2025-09-24 00:36:49.821] stop dss Done [2025-09-24 00:36:49.821] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:36:49.869] /dev/mem opened. [2025-09-24 00:36:49.869] Memory mapped at address 0xffff7f937000. [2025-09-24 00:36:49.895] Read at address 0x00600018 (0xffff7f937018): 0x00000000 [2025-09-24 00:36:49.895] Write at address 0x00600018 (0xffff7f937018): 0x00400040, readback 0x00400040 [2025-09-24 00:36:49.911] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:36:49.927] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:36:50.039] Loaded PowerVR consumer services. [2025-09-24 00:36:50.182] Waiting data available... [2025-09-24 00:36:50.182] 512+0 records in [2025-09-24 00:36:50.182] 512+0 records out [2025-09-24 00:36:50.198] Starting syslogd/klogd: done [2025-09-24 00:36:50.214] DML Start [2025-09-24 00:36:50.405] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:36:50.614] DML res1: 0 [2025-09-24 00:36:51.061] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:36:51.077] Read Success [2025-09-24 00:36:51.077] Verifying certificate... [2025-09-24 00:36:51.349] Verified OK [2025-09-24 00:36:51.364] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:36:53.134] Verified OK [2025-09-24 00:36:53.134] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:36:53.752] Verified OK [2025-09-24 00:36:53.752] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:36:56.278] fs.protected_hardlinks = 1 [2025-09-24 00:36:56.308] fs.protected_symlinks = 1 [2025-09-24 00:36:56.308] kernel.modules_disabled = 1 [2025-09-24 00:36:56.500] [2025-09-24 00:36:56.500] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:36:57.685] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:37:05.500] SBL1:1210.0.1.0 [2025-09-24 00:37:05.532] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:37:07.115] SBL2:1210.0.1.0 [2025-09-24 00:37:07.148] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:37:07.260] j-A [2025-09-24 00:37:14.630] The R5 Autosar Classic is running [2025-09-24 00:37:14.630] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:37:14.630] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:37:15.237] INIT: version 2.96 booting [2025-09-24 00:37:15.349] INIT: Entering runlevel: 5 [2025-09-24 00:37:15.509] mtd24 attached [2025-09-24 00:37:15.509] mtd28 attached [2025-09-24 00:37:15.525] mtd32 attached [2025-09-24 00:37:15.540] ubi0:textures is mounted. [2025-09-24 00:37:15.573] RTNETLINK answers: File exists [2025-09-24 00:37:15.614] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:37:15.614] ubi2:dml_code is mounted. [2025-09-24 00:37:15.614] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:37:15.614] ubi1:animations is mounted. [2025-09-24 00:37:15.614] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:37:15.614] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:37:15.614] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:37:15.634] data.LB_FadeInType0=100 [2025-09-24 00:37:15.634] data.CHLH_FadeInType0=0 [2025-09-24 00:37:15.634] data.WU_FadeInDelay=0 [2025-09-24 00:37:15.634] max_time_out=0 [2025-09-24 00:37:15.634] No splash screen [2025-09-24 00:37:15.634] stop dss Done [2025-09-24 00:37:15.667] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:37:15.708] /dev/mem opened. [2025-09-24 00:37:15.708] Memory mapped at address 0xffffb0c1b000. [2025-09-24 00:37:15.708] Read at address 0x00600018 (0xffffb0c1b018): 0x00000000 [2025-09-24 00:37:15.708] Write at address 0x00600018 (0xffffb0c1b018): 0x00400040, readback 0x00400040 [2025-09-24 00:37:15.708] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:37:15.931] Loaded PowerVR consumer services. [2025-09-24 00:37:15.979] Waiting data available... [2025-09-24 00:37:15.995] 512+0 records in [2025-09-24 00:37:15.995] 512+0 records out [2025-09-24 00:37:16.044] Starting syslogd/klogd: done [2025-09-24 00:37:16.060] DML Start [2025-09-24 00:37:16.203] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:37:16.427] DML res1: 0 [2025-09-24 00:37:16.898] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:37:16.898] Read Success [2025-09-24 00:37:16.898] Verifying certificate... [2025-09-24 00:37:17.155] Verified OK [2025-09-24 00:37:17.155] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:37:18.937] Verified OK [2025-09-24 00:37:18.937] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:37:19.433] Verified OK [2025-09-24 00:37:19.454] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:37:21.948] fs.protected_hardlinks = 1 [2025-09-24 00:37:21.948] fs.protected_symlinks = 1 [2025-09-24 00:37:21.964] kernel.modules_disabled = 1 [2025-09-24 00:37:22.156] [2025-09-24 00:37:22.156] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:37:23.521] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:37:31.279] SBL1:1210.0.1.0 [2025-09-24 00:37:31.327] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:37:32.893] SBL2:1210.0.1.0 [2025-09-24 00:37:32.941] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:37:33.037] j-A [2025-09-24 00:37:40.392] The R5 Autosar Classic is running [2025-09-24 00:37:40.417] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:37:40.417] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:37:41.024] INIT: version 2.96 booting [2025-09-24 00:37:41.136] INIT: Entering runlevel: 5 [2025-09-24 00:37:41.296] mtd32 attached [2025-09-24 00:37:41.312] mtd24 attached [2025-09-24 00:37:41.312] mtd28 attached [2025-09-24 00:37:41.360] RTNETLINK answers: File exists [2025-09-24 00:37:41.410] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:37:41.410] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:37:41.410] ubi1:textures is mounted. [2025-09-24 00:37:41.410] ubi0:dml_code is mounted. [2025-09-24 00:37:41.410] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:37:41.410] ubi2:animations is mounted. [2025-09-24 00:37:41.410] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:37:41.410] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:37:41.410] data.LB_FadeInType0=100 [2025-09-24 00:37:41.431] data.CHLH_FadeInType0=0 [2025-09-24 00:37:41.431] data.WU_FadeInDelay=0 [2025-09-24 00:37:41.431] max_time_out=0 [2025-09-24 00:37:41.431] No splash screen [2025-09-24 00:37:41.431] stop dss Done [2025-09-24 00:37:41.447] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:37:41.472] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:37:41.513] /dev/mem opened. [2025-09-24 00:37:41.513] Memory mapped at address 0xffffbb76d000. [2025-09-24 00:37:41.513] Read at address 0x00600018 (0xffffbb76d018): 0x00000000 [2025-09-24 00:37:41.513] Write at address 0x00600018 (0xffffbb76d018): 0x00400040, readback 0x00400040 [2025-09-24 00:37:41.577] Loaded PowerVR consumer services. [2025-09-24 00:37:41.753] Waiting data available... [2025-09-24 00:37:41.769] 512+0 records in [2025-09-24 00:37:41.769] 512+0 records out [2025-09-24 00:37:41.801] Starting syslogd/klogd: done [2025-09-24 00:37:41.817] DML Start [2025-09-24 00:37:41.992] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:37:42.200] DML res1: 0 [2025-09-24 00:37:42.664] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:37:42.685] Read Success [2025-09-24 00:37:42.685] Verifying certificate... [2025-09-24 00:37:42.925] Verified OK [2025-09-24 00:37:42.940] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:37:44.758] Verified OK [2025-09-24 00:37:44.758] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:37:45.261] Verified OK [2025-09-24 00:37:45.261] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:37:47.660] fs.protected_hardlinks = 1 [2025-09-24 00:37:47.676] fs.protected_symlinks = 1 [2025-09-24 00:37:47.676] kernel.modules_disabled = 1 [2025-09-24 00:37:47.867] [2025-09-24 00:37:47.867] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:37:49.288] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:37:57.082] SBL1:1210.0.1.0 [2025-09-24 00:37:57.113] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:37:58.696] SBL2:1210.0.1.0 [2025-09-24 00:37:58.728] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:37:58.839] j-A [2025-09-24 00:38:06.214] The R5 Autosar Classic is running [2025-09-24 00:38:06.214] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:38:06.214] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:38:06.821] INIT: version 2.96 booting [2025-09-24 00:38:06.933] INIT: Entering runlevel: 5 [2025-09-24 00:38:07.093] mtd28 attached [2025-09-24 00:38:07.093] mtd24 attached [2025-09-24 00:38:07.125] mtd32 attached [2025-09-24 00:38:07.157] ubi0:animations is mounted. [2025-09-24 00:38:07.157] ubi1:textures is mounted. [2025-09-24 00:38:07.218] RTNETLINK answers: File exists [2025-09-24 00:38:07.218] ubi2:dml_code is mounted. [2025-09-24 00:38:07.218] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:38:07.218] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:38:07.218] data.LB_FadeInType0=100 [2025-09-24 00:38:07.218] data.CHLH_FadeInType0=0 [2025-09-24 00:38:07.218] data.WU_FadeInDelay=0 [2025-09-24 00:38:07.218] max_time_out=0 [2025-09-24 00:38:07.218] No splash screen [2025-09-24 00:38:07.218] stop dss Done [2025-09-24 00:38:07.218] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:38:07.218] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:38:07.218] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:38:07.266] /dev/mem opened. [2025-09-24 00:38:07.266] Memory mapped at address 0xffffa6dab000. [2025-09-24 00:38:07.292] Read at address 0x00600018 (0xffffa6dab018): 0x00000000 [2025-09-24 00:38:07.292] Write at address 0x00600018 (0xffffa6dab018): 0x00400040, readback 0x00400040 [2025-09-24 00:38:07.340] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:38:07.356] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:38:07.532] Loaded PowerVR consumer services. [2025-09-24 00:38:07.563] 512+0 records in [2025-09-24 00:38:07.563] 512+0 records out [2025-09-24 00:38:07.611] Waiting data available... [2025-09-24 00:38:07.611] Starting syslogd/klogd: done [2025-09-24 00:38:07.643] DML Start [2025-09-24 00:38:07.772] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:38:07.994] DML res1: 0 [2025-09-24 00:38:08.474] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:38:08.490] Read Success [2025-09-24 00:38:08.490] Verifying certificate... [2025-09-24 00:38:08.747] Verified OK [2025-09-24 00:38:08.763] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:38:10.518] Verified OK [2025-09-24 00:38:10.518] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:38:11.133] Verified OK [2025-09-24 00:38:11.133] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:38:13.659] fs.protected_hardlinks = 1 [2025-09-24 00:38:13.675] fs.protected_symlinks = 1 [2025-09-24 00:38:13.691] kernel.modules_disabled = 1 [2025-09-24 00:38:13.883] [2025-09-24 00:38:13.883] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:38:15.043] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:38:22.877] SBL1:1210.0.1.0 [2025-09-24 00:38:22.925] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:38:24.491] SBL2:1210.0.1.0 [2025-09-24 00:38:24.539] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:38:24.635] j-A [2025-09-24 00:38:31.991] The R5 Autosar Classic is running [2025-09-24 00:38:32.012] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:38:32.012] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:38:32.618] INIT: version 2.96 booting [2025-09-24 00:38:32.731] INIT: Entering runlevel: 5 [2025-09-24 00:38:32.891] mtd32 attached [2025-09-24 00:38:32.891] mtd28 attached [2025-09-24 00:38:32.907] mtd24 attached [2025-09-24 00:38:32.955] RTNETLINK answers: File exists [2025-09-24 00:38:32.955] ubi0:dml_code is mounted. [2025-09-24 00:38:32.990] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:38:32.990] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:38:32.991] ubi1:animations is mounted. [2025-09-24 00:38:32.991] ubi2:textures is mounted. [2025-09-24 00:38:32.991] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:38:32.991] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:38:32.991] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:38:33.019] data.LB_FadeInType0=100 [2025-09-24 00:38:33.019] data.CHLH_FadeInType0=0 [2025-09-24 00:38:33.019] data.WU_FadeInDelay=0 [2025-09-24 00:38:33.019] max_time_out=0 [2025-09-24 00:38:33.019] No splash screen [2025-09-24 00:38:33.019] stop dss Done [2025-09-24 00:38:33.043] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:38:33.043] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:38:33.059] /dev/mem opened. [2025-09-24 00:38:33.092] Memory mapped at address 0xffffab4a0000. [2025-09-24 00:38:33.092] Read at address 0x00600018 (0xffffab4a0018): 0x00000000 [2025-09-24 00:38:33.092] Write at address 0x00600018 (0xffffab4a0018): 0x00400040, readback 0x00400040 [2025-09-24 00:38:33.299] Loaded PowerVR consumer services. [2025-09-24 00:38:33.363] 512+0 records in [2025-09-24 00:38:33.363] 512+0 records out [2025-09-24 00:38:33.363] Waiting data available... [2025-09-24 00:38:33.411] Starting syslogd/klogd: done [2025-09-24 00:38:33.427] DML Start [2025-09-24 00:38:33.619] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:38:33.875] DML res1: 0 [2025-09-24 00:38:34.258] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:38:34.258] Read Success [2025-09-24 00:38:34.258] Verifying certificate... [2025-09-24 00:38:34.530] Verified OK [2025-09-24 00:38:34.546] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:38:36.223] Verified OK [2025-09-24 00:38:36.239] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:38:36.843] Verified OK [2025-09-24 00:38:36.843] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:38:39.385] fs.protected_hardlinks = 1 [2025-09-24 00:38:39.401] fs.protected_symlinks = 1 [2025-09-24 00:38:39.417] kernel.modules_disabled = 1 [2025-09-24 00:38:39.593] [2025-09-24 00:38:39.593] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:38:40.935] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:38:48.688] SBL1:1210.0.1.0 [2025-09-24 00:38:48.736] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:38:50.319] SBL2:1210.0.1.0 [2025-09-24 00:38:50.351] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:38:50.463] j-A [2025-09-24 00:38:57.802] The R5 Autosar Classic is running [2025-09-24 00:38:57.833] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:38:57.833] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:38:58.441] INIT: version 2.96 booting [2025-09-24 00:38:58.553] INIT: Entering runlevel: 5 [2025-09-24 00:38:58.697] mtd24 attached [2025-09-24 00:38:58.712] mtd28 attached [2025-09-24 00:38:58.728] mtd32 attached [2025-09-24 00:38:58.760] ubi0:textures is mounted. [2025-09-24 00:38:58.776] RTNETLINK answers: File exists [2025-09-24 00:38:58.776] ubi1:animations is mounted. [2025-09-24 00:38:58.835] ubi2:dml_code is mounted. [2025-09-24 00:38:58.835] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:38:58.835] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:38:58.835] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:38:58.835] data.LB_FadeInType0=100 [2025-09-24 00:38:58.835] data.CHLH_FadeInType0=0 [2025-09-24 00:38:58.835] data.WU_FadeInDelay=0 [2025-09-24 00:38:58.835] max_time_out=0 [2025-09-24 00:38:58.835] No splash screen [2025-09-24 00:38:58.835] stop dss Done [2025-09-24 00:38:58.835] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:38:58.835] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:38:58.907] /dev/mem opened. [2025-09-24 00:38:58.907] Memory mapped at address 0xffff8a3b4000. [2025-09-24 00:38:58.907] Read at address 0x00600018 (0xffff8a3b4018): 0x00000000 [2025-09-24 00:38:58.907] Write at address 0x00600018 (0xffff8a3b4018): 0x00400040, readback 0x00400040 [2025-09-24 00:38:58.907] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:38:58.922] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:38:58.986] Loaded PowerVR consumer services. [2025-09-24 00:38:59.173] Waiting data available... [2025-09-24 00:38:59.173] 512+0 records in [2025-09-24 00:38:59.173] 512+0 records out [2025-09-24 00:38:59.220] Starting syslogd/klogd: done [2025-09-24 00:38:59.236] DML Start [2025-09-24 00:38:59.413] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:38:59.620] DML res1: 0 [2025-09-24 00:39:00.052] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:39:00.068] Read Success [2025-09-24 00:39:00.068] Verifying certificate... [2025-09-24 00:39:00.323] Verified OK [2025-09-24 00:39:00.339] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:39:01.854] Verified OK [2025-09-24 00:39:01.854] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:39:02.441] Verified OK [2025-09-24 00:39:02.441] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:39:05.206] fs.protected_hardlinks = 1 [2025-09-24 00:39:05.206] fs.protected_symlinks = 1 [2025-09-24 00:39:05.222] kernel.modules_disabled = 1 [2025-09-24 00:39:05.414] [2025-09-24 00:39:05.414] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:39:06.688] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:39:14.513] SBL1:1210.0.1.0 [2025-09-24 00:39:14.561] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:39:16.127] SBL2:1210.0.1.0 [2025-09-24 00:39:16.175] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:39:16.272] j-A [2025-09-24 00:39:23.627] The R5 Autosar Classic is running [2025-09-24 00:39:23.627] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:39:23.648] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:39:24.255] INIT: version 2.96 booting [2025-09-24 00:39:24.367] INIT: Entering runlevel: 5 [2025-09-24 00:39:24.512] mtd32 attached [2025-09-24 00:39:24.528] mtd28 attached [2025-09-24 00:39:24.544] mtd24 attached [2025-09-24 00:39:24.575] ubi0:dml_code is mounted. [2025-09-24 00:39:24.591] RTNETLINK answers: File exists [2025-09-24 00:39:24.591] ubi1:animations is mounted. [2025-09-24 00:39:24.644] ubi2:textures is mounted. [2025-09-24 00:39:24.644] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:39:24.644] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:39:24.644] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:39:24.644] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:39:24.644] data.LB_FadeInType0=100 [2025-09-24 00:39:24.644] data.CHLH_FadeInType0=0 [2025-09-24 00:39:24.644] data.WU_FadeInDelay=0 [2025-09-24 00:39:24.644] max_time_out=0 [2025-09-24 00:39:24.644] No splash screen [2025-09-24 00:39:24.644] stop dss Done [2025-09-24 00:39:24.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:39:24.719] /dev/mem opened. [2025-09-24 00:39:24.719] Memory mapped at address 0xffff9d4d4000. [2025-09-24 00:39:24.719] Read at address 0x00600018 (0xffff9d4d4018): 0x00000000 [2025-09-24 00:39:24.719] Write at address 0x00600018 (0xffff9d4d4018): 0x00400040, readback 0x00400040 [2025-09-24 00:39:24.735] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:39:24.750] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:39:24.846] Loaded PowerVR consumer services. [2025-09-24 00:39:25.002] Waiting data available... [2025-09-24 00:39:25.002] 512+0 records in [2025-09-24 00:39:25.002] 512+0 records out [2025-09-24 00:39:25.033] Starting syslogd/klogd: done [2025-09-24 00:39:25.065] DML Start [2025-09-24 00:39:25.225] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:39:25.385] DML res1: 0 [2025-09-24 00:39:25.903] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:39:25.903] Read Success [2025-09-24 00:39:25.903] Verifying certificate... [2025-09-24 00:39:26.110] Verified OK [2025-09-24 00:39:26.126] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:39:27.735] Verified OK [2025-09-24 00:39:27.735] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:39:28.309] Verified OK [2025-09-24 00:39:28.309] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:39:31.107] fs.protected_hardlinks = 1 [2025-09-24 00:39:31.122] fs.protected_symlinks = 1 [2025-09-24 00:39:31.122] kernel.modules_disabled = 1 [2025-09-24 00:39:31.330] [2025-09-24 00:39:31.330] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:39:32.537] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:39:40.315] SBL1:1210.0.1.0 [2025-09-24 00:39:40.363] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:39:41.931] SBL2:1210.0.1.0 [2025-09-24 00:39:41.979] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:39:42.090] j-A [2025-09-24 00:39:49.429] The R5 Autosar Classic is running [2025-09-24 00:39:49.454] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:39:49.454] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:39:50.062] INIT: version 2.96 booting [2025-09-24 00:39:50.174] INIT: Entering runlevel: 5 [2025-09-24 00:39:50.318] mtd24 attached [2025-09-24 00:39:50.334] mtd32 attached [2025-09-24 00:39:50.350] mtd28 attached [2025-09-24 00:39:50.366] ubi0:textures is mounted. [2025-09-24 00:39:50.382] ubi1:dml_code is mounted. [2025-09-24 00:39:50.452] RTNETLINK answers: File exists [2025-09-24 00:39:50.452] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:39:50.452] ubi2:animations is mounted. [2025-09-24 00:39:50.452] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:39:50.452] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:39:50.452] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:39:50.452] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:39:50.452] data.LB_FadeInType0=100 [2025-09-24 00:39:50.452] data.CHLH_FadeInType0=0 [2025-09-24 00:39:50.452] data.WU_FadeInDelay=0 [2025-09-24 00:39:50.452] max_time_out=0 [2025-09-24 00:39:50.452] No splash screen [2025-09-24 00:39:50.452] stop dss Done [2025-09-24 00:39:50.484] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:39:50.516] /dev/mem opened. [2025-09-24 00:39:50.516] Memory mapped at address 0xffff8310e000. [2025-09-24 00:39:50.516] Read at address 0x00600018 (0xffff8310e018): 0x00000000 [2025-09-24 00:39:50.516] Write at address 0x00600018 (0xffff8310e018): 0x00400040, readback 0x00400040 [2025-09-24 00:39:50.516] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:39:50.627] Loaded PowerVR consumer services. [2025-09-24 00:39:50.772] Waiting data available... [2025-09-24 00:39:50.788] 512+0 records in [2025-09-24 00:39:50.788] 512+0 records out [2025-09-24 00:39:50.836] Starting syslogd/klogd: done [2025-09-24 00:39:50.852] DML Start [2025-09-24 00:39:50.995] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:39:51.188] DML res1: 0 [2025-09-24 00:39:51.697] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:39:51.697] Read Success [2025-09-24 00:39:51.697] Verifying certificate... [2025-09-24 00:39:51.953] Verified OK [2025-09-24 00:39:51.969] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:39:53.584] Verified OK [2025-09-24 00:39:53.584] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:39:54.207] Verified OK [2025-09-24 00:39:54.223] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:39:56.878] fs.protected_hardlinks = 1 [2025-09-24 00:39:56.878] fs.protected_symlinks = 1 [2025-09-24 00:39:56.894] kernel.modules_disabled = 1 [2025-09-24 00:39:57.086] [2025-09-24 00:39:57.086] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:39:58.276] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:40:06.116] SBL1:1210.0.1.0 [2025-09-24 00:40:06.148] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:40:07.731] SBL2:1210.0.1.0 [2025-09-24 00:40:07.762] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:40:07.875] j-A [2025-09-24 00:40:15.229] The R5 Autosar Classic is running [2025-09-24 00:40:15.229] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:40:15.250] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:40:15.858] INIT: version 2.96 booting [2025-09-24 00:40:15.970] INIT: Entering runlevel: 5 [2025-09-24 00:40:16.130] mtd24 attached [2025-09-24 00:40:16.130] mtd28 attached [2025-09-24 00:40:16.146] mtd32 attached [2025-09-24 00:40:16.209] ubi0:textures is mounted. [2025-09-24 00:40:16.209] ubi1:animations is mounted. [2025-09-24 00:40:16.209] RTNETLINK answers: File exists [2025-09-24 00:40:16.209] ubi2:dml_code is mounted. [2025-09-24 00:40:16.268] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:40:16.268] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:40:16.268] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:40:16.268] data.LB_FadeInType0=100 [2025-09-24 00:40:16.268] data.CHLH_FadeInType0=0 [2025-09-24 00:40:16.268] data.WU_FadeInDelay=0 [2025-09-24 00:40:16.268] max_time_out=0 [2025-09-24 00:40:16.268] No splash screen [2025-09-24 00:40:16.268] stop dss Done [2025-09-24 00:40:16.268] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:40:16.268] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:40:16.299] /dev/mem opened. [2025-09-24 00:40:16.299] Memory mapped at address 0xffff89b3e000. [2025-09-24 00:40:16.344] Read at address 0x00600018 (0xffff89b3e018): 0x00000000 [2025-09-24 00:40:16.344] Write at address 0x00600018 (0xffff89b3e018): 0x00400040, readback 0x00400040 [2025-09-24 00:40:16.344] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:40:16.344] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:40:16.489] Loaded PowerVR consumer services. [2025-09-24 00:40:16.611] Waiting data available... [2025-09-24 00:40:16.611] 512+0 records in [2025-09-24 00:40:16.611] 512+0 records out [2025-09-24 00:40:16.628] Starting syslogd/klogd: done [2025-09-24 00:40:16.644] DML Start [2025-09-24 00:40:16.852] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:40:17.108] DML res1: 0 [2025-09-24 00:40:17.450] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:40:17.450] Read Success [2025-09-24 00:40:17.450] Verifying certificate... [2025-09-24 00:40:17.738] Verified OK [2025-09-24 00:40:17.754] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:40:19.359] Verified OK [2025-09-24 00:40:19.359] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:40:19.993] Verified OK [2025-09-24 00:40:19.993] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:40:22.696] fs.protected_hardlinks = 1 [2025-09-24 00:40:22.712] fs.protected_symlinks = 1 [2025-09-24 00:40:22.712] kernel.modules_disabled = 1 [2025-09-24 00:40:22.903] [2025-09-24 00:40:22.903] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:40:24.160] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:40:31.910] SBL1:1210.0.1.0 [2025-09-24 00:40:31.958] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:40:33.524] SBL2:1210.0.1.0 [2025-09-24 00:40:33.556] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:40:33.668] j-A [2025-09-24 00:40:41.022] The R5 Autosar Classic is running [2025-09-24 00:40:41.022] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:40:41.043] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:40:41.651] INIT: version 2.96 booting [2025-09-24 00:40:41.763] INIT: Entering runlevel: 5 [2025-09-24 00:40:41.923] mtd32 attached [2025-09-24 00:40:41.939] mtd28 attached [2025-09-24 00:40:41.939] mtd24 attached [2025-09-24 00:40:41.987] RTNETLINK answers: File exists [2025-09-24 00:40:42.026] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:40:42.026] ubi0:dml_code is mounted. [2025-09-24 00:40:42.026] ubi1:animations is mounted. [2025-09-24 00:40:42.026] ubi2:textures is mounted. [2025-09-24 00:40:42.026] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:40:42.026] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:40:42.026] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:40:42.026] data.LB_FadeInType0=100 [2025-09-24 00:40:42.051] data.CHLH_FadeInType0=0 [2025-09-24 00:40:42.051] data.WU_FadeInDelay=0 [2025-09-24 00:40:42.051] max_time_out=0 [2025-09-24 00:40:42.051] No splash screen [2025-09-24 00:40:42.051] stop dss Done [2025-09-24 00:40:42.051] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:40:42.132] /dev/mem opened. [2025-09-24 00:40:42.132] Memory mapped at address 0xffffbd85f000. [2025-09-24 00:40:42.132] Read at address 0x00600018 (0xffffbd85f018): 0x00000000 [2025-09-24 00:40:42.132] Write at address 0x00600018 (0xffffbd85f018): 0x00400040, readback 0x00400040 [2025-09-24 00:40:42.132] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:40:42.132] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:40:42.308] Loaded PowerVR consumer services. [2025-09-24 00:40:42.404] Waiting data available... [2025-09-24 00:40:42.420] 512+0 records in [2025-09-24 00:40:42.420] 512+0 records out [2025-09-24 00:40:42.436] Starting syslogd/klogd: done [2025-09-24 00:40:42.468] DML Start [2025-09-24 00:40:42.643] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:40:42.899] DML res1: 0 [2025-09-24 00:40:43.219] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:40:43.240] Read Success [2025-09-24 00:40:43.240] Verifying certificate... [2025-09-24 00:40:43.480] Verified OK [2025-09-24 00:40:43.496] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:40:45.159] Verified OK [2025-09-24 00:40:45.159] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:40:45.844] Verified OK [2025-09-24 00:40:45.844] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:40:48.509] fs.protected_hardlinks = 1 [2025-09-24 00:40:48.509] fs.protected_symlinks = 1 [2025-09-24 00:40:48.509] kernel.modules_disabled = 1 [2025-09-24 00:40:48.685] [2025-09-24 00:40:48.685] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:40:49.961] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:40:52.254] SBL1:1210.0.1.0 [2025-09-24 00:40:57.737] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:40:59.320] SBL2:1210.0.1.0 [2025-09-24 00:40:59.352] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:40:59.463] j-A [2025-09-24 00:41:06.833] The R5 Autosar Classic is running [2025-09-24 00:41:06.833] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:41:06.833] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:41:07.441] INIT: version 2.96 booting [2025-09-24 00:41:07.553] INIT: Entering runlevel: 5 [2025-09-24 00:41:07.696] mtd32 attached [2025-09-24 00:41:07.712] mtd28 attached [2025-09-24 00:41:07.712] mtd24 attached [2025-09-24 00:41:07.761] ubi0:dml_code is mounted. [2025-09-24 00:41:07.777] RTNETLINK answers: File exists [2025-09-24 00:41:07.816] ubi2:textures is mounted. [2025-09-24 00:41:07.816] ubi1:animations is mounted. [2025-09-24 00:41:07.816] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:41:07.816] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:41:07.816] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:41:07.816] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:41:07.816] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:41:07.837] data.LB_FadeInType0=100 [2025-09-24 00:41:07.837] data.CHLH_FadeInType0=0 [2025-09-24 00:41:07.837] data.WU_FadeInDelay=0 [2025-09-24 00:41:07.837] max_time_out=0 [2025-09-24 00:41:07.837] No splash screen [2025-09-24 00:41:07.837] stop dss Done [2025-09-24 00:41:07.885] /dev/mem opened. [2025-09-24 00:41:07.885] Memory mapped at address 0xffff7f96c000. [2025-09-24 00:41:07.927] Read at address 0x00600018 (0xffff7f96c018): 0x00000000 [2025-09-24 00:41:07.927] Write at address 0x00600018 (0xffff7f96c018): 0x00400040, readback 0x00400040 [2025-09-24 00:41:07.927] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:41:07.927] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:41:08.119] Loaded PowerVR consumer services. [2025-09-24 00:41:08.182] 512+0 records in [2025-09-24 00:41:08.182] 512+0 records out [2025-09-24 00:41:08.214] Starting syslogd/klogd: Waiting data available... [2025-09-24 00:41:08.230] done [2025-09-24 00:41:08.230] DML Start [2025-09-24 00:41:08.406] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:41:08.631] DML res1: 0 [2025-09-24 00:41:09.104] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:41:09.104] Read Success [2025-09-24 00:41:09.104] Verifying certificate... [2025-09-24 00:41:09.328] Verified OK [2025-09-24 00:41:09.344] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:41:11.084] Verified OK [2025-09-24 00:41:11.084] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:41:11.628] Verified OK [2025-09-24 00:41:11.628] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:41:14.267] fs.protected_hardlinks = 1 [2025-09-24 00:41:14.267] fs.protected_symlinks = 1 [2025-09-24 00:41:14.282] kernel.modules_disabled = 1 [2025-09-24 00:41:14.459] [2025-09-24 00:41:14.459] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:41:15.640] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:41:23.522] SBL1:1210.0.1.0 [2025-09-24 00:41:23.554] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:41:25.136] SBL2:1210.0.1.0 [2025-09-24 00:41:25.168] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:41:25.280] j-A [2025-09-24 00:41:32.654] The R5 Autosar Classic is running [2025-09-24 00:41:32.654] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:41:32.654] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:41:33.262] INIT: version 2.96 booting [2025-09-24 00:41:33.373] INIT: Entering runlevel: 5 [2025-09-24 00:41:33.533] mtd32 attached [2025-09-24 00:41:33.533] mtd28 attached [2025-09-24 00:41:33.550] mtd24 attached [2025-09-24 00:41:33.598] RTNETLINK answers: File exists [2025-09-24 00:41:33.659] ubi1:animations is mounted. [2025-09-24 00:41:33.659] ubi0:dml_code is mounted. [2025-09-24 00:41:33.659] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:41:33.659] ubi2:textures is mounted. [2025-09-24 00:41:33.659] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:41:33.659] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:41:33.659] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:41:33.659] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:41:33.659] data.LB_FadeInType0=100 [2025-09-24 00:41:33.659] data.CHLH_FadeInType0=0 [2025-09-24 00:41:33.659] data.WU_FadeInDelay=0 [2025-09-24 00:41:33.659] max_time_out=0 [2025-09-24 00:41:33.659] No splash screen [2025-09-24 00:41:33.659] stop dss Done [2025-09-24 00:41:33.691] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:41:33.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:41:33.715] /dev/mem opened. [2025-09-24 00:41:33.715] Memory mapped at address 0xffff90f74000. [2025-09-24 00:41:33.741] Read at address 0x00600018 (0xffff90f74018): 0x00000000 [2025-09-24 00:41:33.741] Write at address 0x00600018 (0xffff90f74018): 0x00400040, readback 0x00400040 [2025-09-24 00:41:33.837] Loaded PowerVR consumer services. [2025-09-24 00:41:33.997] Waiting data available... [2025-09-24 00:41:34.013] 512+0 records in [2025-09-24 00:41:34.013] 512+0 records out [2025-09-24 00:41:34.029] Starting syslogd/klogd: done [2025-09-24 00:41:34.044] DML Start [2025-09-24 00:41:34.221] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:41:34.397] DML res1: 0 [2025-09-24 00:41:34.860] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:41:34.876] Read Success [2025-09-24 00:41:34.876] Verifying certificate... [2025-09-24 00:41:35.116] Verified OK [2025-09-24 00:41:35.148] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:41:36.992] Verified OK [2025-09-24 00:41:36.992] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:41:37.440] Verified OK [2025-09-24 00:41:37.440] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:41:39.822] fs.protected_hardlinks = 1 [2025-09-24 00:41:39.838] fs.protected_symlinks = 1 [2025-09-24 00:41:39.854] kernel.modules_disabled = 1 [2025-09-24 00:41:40.046] [2025-09-24 00:41:40.046] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:41:41.548] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:41:49.338] SBL1:1210.0.1.0 [2025-09-24 00:41:49.386] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:41:50.953] SBL2:1210.0.1.0 [2025-09-24 00:41:51.000] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:41:51.113] j-A [2025-09-24 00:41:58.451] The R5 Autosar Classic is running [2025-09-24 00:41:58.482] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:41:58.482] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:41:59.089] INIT: version 2.96 booting [2025-09-24 00:41:59.201] INIT: Entering runlevel: 5 [2025-09-24 00:41:59.345] mtd24 attached [2025-09-24 00:41:59.361] mtd28 attached [2025-09-24 00:41:59.377] mtd32 attached [2025-09-24 00:41:59.424] ubi0:textures is mounted. [2025-09-24 00:41:59.424] ubi1:animations is mounted. [2025-09-24 00:41:59.465] RTNETLINK answers: File exists [2025-09-24 00:41:59.465] ubi2:dml_code is mounted. [2025-09-24 00:41:59.465] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:41:59.465] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:41:59.465] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:41:59.465] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:41:59.465] data.LB_FadeInType0=100 [2025-09-24 00:41:59.465] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:41:59.491] data.CHLH_FadeInType0=0 [2025-09-24 00:41:59.491] data.WU_FadeInDelay=0 [2025-09-24 00:41:59.491] max_time_out=0 [2025-09-24 00:41:59.491] No splash screen [2025-09-24 00:41:59.491] stop dss Done [2025-09-24 00:41:59.524] /dev/mem opened. [2025-09-24 00:41:59.524] Memory mapped at address 0xffff970fd000. [2025-09-24 00:41:59.550] Read at address 0x00600018 (0xffff970fd018): 0x00000000 [2025-09-24 00:41:59.550] Write at address 0x00600018 (0xffff970fd018): 0x00400040, readback 0x00400040 [2025-09-24 00:41:59.566] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:41:59.582] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:41:59.790] Loaded PowerVR consumer services. [2025-09-24 00:41:59.806] Waiting data available... [2025-09-24 00:41:59.838] 512+0 records in [2025-09-24 00:41:59.838] 512+0 records out [2025-09-24 00:41:59.854] Starting syslogd/klogd: done [2025-09-24 00:41:59.870] DML Start [2025-09-24 00:42:00.061] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:42:00.253] DML res1: 0 [2025-09-24 00:42:00.682] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:42:00.682] Read Success [2025-09-24 00:42:00.682] Verifying certificate... [2025-09-24 00:42:00.921] Verified OK [2025-09-24 00:42:00.953] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:42:02.645] Verified OK [2025-09-24 00:42:02.645] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:42:03.269] Verified OK [2025-09-24 00:42:03.290] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:42:05.848] fs.protected_hardlinks = 1 [2025-09-24 00:42:05.864] fs.protected_symlinks = 1 [2025-09-24 00:42:05.864] kernel.modules_disabled = 1 [2025-09-24 00:42:06.055] [2025-09-24 00:42:06.055] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:42:07.315] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:42:15.146] SBL1:1210.0.1.0 [2025-09-24 00:42:15.194] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:42:16.761] SBL2:1210.0.1.0 [2025-09-24 00:42:16.809] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:42:16.921] j-A [2025-09-24 00:42:24.260] The R5 Autosar Classic is running [2025-09-24 00:42:24.285] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:42:24.285] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:42:24.892] INIT: version 2.96 booting [2025-09-24 00:42:25.005] INIT: Entering runlevel: 5 [2025-09-24 00:42:25.164] mtd32 attached [2025-09-24 00:42:25.164] mtd28 attached [2025-09-24 00:42:25.180] mtd24 attached [2025-09-24 00:42:25.228] RTNETLINK answers: File exists [2025-09-24 00:42:25.273] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:42:25.273] ubi0:dml_code is mounted. [2025-09-24 00:42:25.273] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:42:25.273] ubi1:animations is mounted. [2025-09-24 00:42:25.273] ubi2:textures is mounted. [2025-09-24 00:42:25.273] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:42:25.273] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:42:25.273] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:42:25.273] data.LB_FadeInType0=100 [2025-09-24 00:42:25.294] data.CHLH_FadeInType0=0 [2025-09-24 00:42:25.294] data.WU_FadeInDelay=0 [2025-09-24 00:42:25.294] max_time_out=0 [2025-09-24 00:42:25.294] No splash screen [2025-09-24 00:42:25.294] stop dss Done [2025-09-24 00:42:25.342] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:42:25.375] /dev/mem opened. [2025-09-24 00:42:25.375] Memory mapped at address 0xffffb0933000. [2025-09-24 00:42:25.375] Read at address 0x00600018 (0xffffb0933018): 0x00000000 [2025-09-24 00:42:25.375] Write at address 0x00600018 (0xffffb0933018): 0x00400040, readback 0x00400040 [2025-09-24 00:42:25.375] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:42:25.583] Loaded PowerVR consumer services. [2025-09-24 00:42:25.615] Waiting data available... [2025-09-24 00:42:25.631] 512+0 records in [2025-09-24 00:42:25.647] 512+0 records out [2025-09-24 00:42:25.663] Starting syslogd/klogd: done [2025-09-24 00:42:25.679] DML Start [2025-09-24 00:42:25.855] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:42:26.094] DML res1: 0 [2025-09-24 00:42:26.462] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:42:26.478] Read Success [2025-09-24 00:42:26.478] Verifying certificate... [2025-09-24 00:42:26.701] Verified OK [2025-09-24 00:42:26.717] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:42:28.381] Verified OK [2025-09-24 00:42:28.381] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:42:29.014] Verified OK [2025-09-24 00:42:29.014] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:42:31.715] fs.protected_hardlinks = 1 [2025-09-24 00:42:31.731] fs.protected_symlinks = 1 [2025-09-24 00:42:31.731] kernel.modules_disabled = 1 [2025-09-24 00:42:31.923] [2025-09-24 00:42:31.923] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:42:33.113] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:42:40.982] SBL1:1210.0.1.0 [2025-09-24 00:42:41.030] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:42:42.597] SBL2:1210.0.1.0 [2025-09-24 00:42:42.629] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:42:42.740] j-A [2025-09-24 00:42:50.115] The R5 Autosar Classic is running [2025-09-24 00:42:50.115] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:42:50.115] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:42:50.721] INIT: version 2.96 booting [2025-09-24 00:42:50.834] INIT: Entering runlevel: 5 [2025-09-24 00:42:50.977] mtd24 attached [2025-09-24 00:42:50.994] mtd28 attached [2025-09-24 00:42:51.010] mtd32 attached [2025-09-24 00:42:51.058] ubi0:textures is mounted. [2025-09-24 00:42:51.058] RTNETLINK answers: File exists [2025-09-24 00:42:51.118] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:42:51.118] ubi2:dml_code is mounted. [2025-09-24 00:42:51.118] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:42:51.118] ubi1:animations is mounted. [2025-09-24 00:42:51.118] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:42:51.118] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:42:51.118] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:42:51.118] data.LB_FadeInType0=100 [2025-09-24 00:42:51.118] data.CHLH_FadeInType0=0 [2025-09-24 00:42:51.118] data.WU_FadeInDelay=0 [2025-09-24 00:42:51.118] max_time_out=0 [2025-09-24 00:42:51.118] No splash screen [2025-09-24 00:42:51.118] stop dss Done [2025-09-24 00:42:51.165] /dev/mem opened. [2025-09-24 00:42:51.191] Memory mapped at address 0xffff9f16a000. [2025-09-24 00:42:51.191] Read at address 0x00600018 (0xffff9f16a018): 0x00000000 [2025-09-24 00:42:51.191] Write at address 0x00600018 (0xffff9f16a018): 0x00400040, readback 0x00400040 [2025-09-24 00:42:51.223] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:42:51.223] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:42:51.335] Loaded PowerVR consumer services. [2025-09-24 00:42:51.463] Waiting data available... [2025-09-24 00:42:51.478] 512+0 records in [2025-09-24 00:42:51.478] 512+0 records out [2025-09-24 00:42:51.511] Starting syslogd/klogd: done [2025-09-24 00:42:51.527] DML Start [2025-09-24 00:42:51.703] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:42:51.943] DML res1: 0 [2025-09-24 00:42:52.357] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:42:52.357] Read Success [2025-09-24 00:42:52.357] Verifying certificate... [2025-09-24 00:42:52.645] Verified OK [2025-09-24 00:42:52.661] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:42:54.323] Verified OK [2025-09-24 00:42:54.344] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:42:54.904] Verified OK [2025-09-24 00:42:54.904] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:42:57.478] fs.protected_hardlinks = 1 [2025-09-24 00:42:57.494] fs.protected_symlinks = 1 [2025-09-24 00:42:57.494] kernel.modules_disabled = 1 [2025-09-24 00:42:57.686] [2025-09-24 00:42:57.686] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:42:58.962] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:43:06.790] SBL1:1210.0.1.0 [2025-09-24 00:43:06.837] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:43:08.404] SBL2:1210.0.1.0 [2025-09-24 00:43:08.452] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:43:08.548] j-A [2025-09-24 00:43:15.903] The R5 Autosar Classic is running [2025-09-24 00:43:15.927] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:43:15.927] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:43:16.534] INIT: version 2.96 booting [2025-09-24 00:43:16.645] INIT: Entering runlevel: 5 [2025-09-24 00:43:16.805] mtd24 attached [2025-09-24 00:43:16.805] mtd28 attached [2025-09-24 00:43:16.821] mtd32 attached [2025-09-24 00:43:16.870] ubi0:textures is mounted. [2025-09-24 00:43:16.870] RTNETLINK answers: File exists [2025-09-24 00:43:16.934] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:43:16.934] ubi1:animations is mounted. [2025-09-24 00:43:16.934] ubi2:dml_code is mounted. [2025-09-24 00:43:16.934] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:43:16.934] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:43:16.934] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:43:16.934] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:43:16.934] data.LB_FadeInType0=100 [2025-09-24 00:43:16.934] data.CHLH_FadeInType0=0 [2025-09-24 00:43:16.934] data.WU_FadeInDelay=0 [2025-09-24 00:43:16.934] max_time_out=0 [2025-09-24 00:43:16.934] No splash screen [2025-09-24 00:43:16.934] stop dss Done [2025-09-24 00:43:16.984] /dev/mem opened. [2025-09-24 00:43:16.984] Memory mapped at address 0xffff8bf40000. [2025-09-24 00:43:16.984] Read at address 0x00600018 (0xffff8bf40018): 0x00000000 [2025-09-24 00:43:16.984] Write at address 0x00600018 (0xffff8bf40018): 0x00400040, readback 0x00400040 [2025-09-24 00:43:17.000] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:43:17.016] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:43:17.280] Waiting data available... [2025-09-24 00:43:17.280] Loaded PowerVR consumer services. [2025-09-24 00:43:17.296] 512+0 records in [2025-09-24 00:43:17.296] 512+0 records out [2025-09-24 00:43:17.344] Starting syslogd/klogd: done [2025-09-24 00:43:17.376] DML Start [2025-09-24 00:43:17.536] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:43:17.743] DML res1: 0 [2025-09-24 00:43:18.271] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:43:18.271] Read Success [2025-09-24 00:43:18.271] Verifying certificate... [2025-09-24 00:43:18.606] Verified OK [2025-09-24 00:43:18.622] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:43:20.410] Verified OK [2025-09-24 00:43:20.410] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:43:20.920] Verified OK [2025-09-24 00:43:20.920] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:43:23.399] fs.protected_hardlinks = 1 [2025-09-24 00:43:23.399] fs.protected_symlinks = 1 [2025-09-24 00:43:23.414] kernel.modules_disabled = 1 [2025-09-24 00:43:23.622] [2025-09-24 00:43:23.622] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:43:24.887] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:43:32.597] SBL1:1210.0.1.0 [2025-09-24 00:43:32.645] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:43:34.211] SBL2:1210.0.1.0 [2025-09-24 00:43:34.260] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:43:34.356] j-A [2025-09-24 00:43:41.711] The R5 Autosar Classic is running [2025-09-24 00:43:41.733] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:43:41.733] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:43:42.341] INIT: version 2.96 booting [2025-09-24 00:43:42.453] INIT: Entering runlevel: 5 [2025-09-24 00:43:42.613] mtd24 attached [2025-09-24 00:43:42.630] mtd32 attached [2025-09-24 00:43:42.630] mtd28 attached [2025-09-24 00:43:42.678] ubi0:textures is mounted. [2025-09-24 00:43:42.742] RTNETLINK answers: File exists [2025-09-24 00:43:42.742] ubi2:animations is mounted. [2025-09-24 00:43:42.742] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:43:42.742] ubi1:dml_code is mounted. [2025-09-24 00:43:42.742] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:43:42.742] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:43:42.742] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:43:42.742] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:43:42.742] data.LB_FadeInType0=100 [2025-09-24 00:43:42.742] data.CHLH_FadeInType0=0 [2025-09-24 00:43:42.742] data.WU_FadeInDelay=0 [2025-09-24 00:43:42.742] max_time_out=0 [2025-09-24 00:43:42.742] No splash screen [2025-09-24 00:43:42.742] stop dss Done [2025-09-24 00:43:42.828] /dev/mem opened. [2025-09-24 00:43:42.828] Memory mapped at address 0xffffbab0c000. [2025-09-24 00:43:42.828] Read at address 0x00600018 (0xffffbab0c018): 0x00000000 [2025-09-24 00:43:42.828] Write at address 0x00600018 (0xffffbab0c018): 0x00400040, readback 0x00400040 [2025-09-24 00:43:42.828] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:43:42.828] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:43:42.940] Loaded PowerVR consumer services. [2025-09-24 00:43:43.068] Waiting data available... [2025-09-24 00:43:43.084] 512+0 records in [2025-09-24 00:43:43.084] 512+0 records out [2025-09-24 00:43:43.100] Starting syslogd/klogd: done [2025-09-24 00:43:43.132] DML Start [2025-09-24 00:43:43.291] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:43:43.548] DML res1: 0 [2025-09-24 00:43:43.973] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:43:43.973] Read Success [2025-09-24 00:43:43.973] Verifying certificate... [2025-09-24 00:43:44.229] Verified OK [2025-09-24 00:43:44.245] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:43:45.933] Verified OK [2025-09-24 00:43:45.933] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:43:46.602] Verified OK [2025-09-24 00:43:46.602] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:43:49.270] fs.protected_hardlinks = 1 [2025-09-24 00:43:49.270] fs.protected_symlinks = 1 [2025-09-24 00:43:49.270] kernel.modules_disabled = 1 [2025-09-24 00:43:49.446] [2025-09-24 00:43:49.446] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:43:50.565] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:43:58.397] SBL1:1210.0.1.0 [2025-09-24 00:43:58.428] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:44:00.012] SBL2:1210.0.1.0 [2025-09-24 00:44:00.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:44:00.155] j-A [2025-09-24 00:44:07.530] The R5 Autosar Classic is running [2025-09-24 00:44:07.530] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:44:07.530] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:44:08.137] INIT: version 2.96 booting [2025-09-24 00:44:08.249] INIT: Entering runlevel: 5 [2025-09-24 00:44:08.394] mtd28 attached [2025-09-24 00:44:08.410] mtd24 attached [2025-09-24 00:44:08.426] mtd32 attached [2025-09-24 00:44:08.458] ubi0:animations is mounted. [2025-09-24 00:44:08.474] RTNETLINK answers: File exists [2025-09-24 00:44:08.530] ubi1:textures is mounted. [2025-09-24 00:44:08.530] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:44:08.531] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:44:08.531] ubi2:dml_code is mounted. [2025-09-24 00:44:08.531] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:44:08.531] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:44:08.531] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:44:08.531] data.LB_FadeInType0=100 [2025-09-24 00:44:08.531] data.CHLH_FadeInType0=0 [2025-09-24 00:44:08.531] data.WU_FadeInDelay=0 [2025-09-24 00:44:08.531] max_time_out=0 [2025-09-24 00:44:08.531] No splash screen [2025-09-24 00:44:08.531] stop dss Done [2025-09-24 00:44:08.578] /dev/mem opened. [2025-09-24 00:44:08.578] Memory mapped at address 0xffff9fc23000. [2025-09-24 00:44:08.613] Read at address 0x00600018 (0xffff9fc23018): 0x00000000 [2025-09-24 00:44:08.613] Write at address 0x00600018 (0xffff9fc23018): 0x00400040, readback 0x00400040 [2025-09-24 00:44:08.613] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:44:08.613] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:44:08.693] Loaded PowerVR consumer services. [2025-09-24 00:44:08.869] Waiting data available... [2025-09-24 00:44:08.869] 512+0 records in [2025-09-24 00:44:08.885] 512+0 records out [2025-09-24 00:44:08.917] Starting syslogd/klogd: done [2025-09-24 00:44:08.933] DML Start [2025-09-24 00:44:09.125] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:44:09.397] DML res1: 0 [2025-09-24 00:44:09.743] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:44:09.743] Read Success [2025-09-24 00:44:09.743] Verifying certificate... [2025-09-24 00:44:09.983] Verified OK [2025-09-24 00:44:09.999] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:44:11.917] Verified OK [2025-09-24 00:44:11.917] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:44:12.434] Verified OK [2025-09-24 00:44:12.434] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:44:14.817] fs.protected_hardlinks = 1 [2025-09-24 00:44:14.832] fs.protected_symlinks = 1 [2025-09-24 00:44:14.832] kernel.modules_disabled = 1 [2025-09-24 00:44:15.025] [2025-09-24 00:44:15.025] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:44:16.443] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:44:24.195] SBL1:1210.0.1.0 [2025-09-24 00:44:24.227] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:44:25.809] SBL2:1210.0.1.0 [2025-09-24 00:44:25.840] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:44:25.953] j-A [2025-09-24 00:44:33.326] The R5 Autosar Classic is running [2025-09-24 00:44:33.326] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:44:33.326] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:44:33.933] INIT: version 2.96 booting [2025-09-24 00:44:34.045] INIT: Entering runlevel: 5 [2025-09-24 00:44:34.206] mtd28 attached [2025-09-24 00:44:34.206] mtd24 attached [2025-09-24 00:44:34.222] mtd32 attached [2025-09-24 00:44:34.306] RTNETLINK answers: File exists [2025-09-24 00:44:34.306] ubi0:animations is mounted. [2025-09-24 00:44:34.306] ubi1:textures is mounted. [2025-09-24 00:44:34.306] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:44:34.306] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:44:34.306] ubi2:dml_code is mounted. [2025-09-24 00:44:34.306] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:44:34.306] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:44:34.306] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:44:34.332] data.LB_FadeInType0=100 [2025-09-24 00:44:34.332] data.CHLH_FadeInType0=0 [2025-09-24 00:44:34.332] data.WU_FadeInDelay=0 [2025-09-24 00:44:34.332] max_time_out=0 [2025-09-24 00:44:34.332] No splash screen [2025-09-24 00:44:34.332] stop dss Done [2025-09-24 00:44:34.347] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:44:34.363] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:44:34.411] /dev/mem opened. [2025-09-24 00:44:34.411] Memory mapped at address 0xffff9269f000. [2025-09-24 00:44:34.411] Read at address 0x00600018 (0xffff9269f018): 0x00000000 [2025-09-24 00:44:34.411] Write at address 0x00600018 (0xffff9269f018): 0x00400040, readback 0x00400040 [2025-09-24 00:44:34.636] Loaded PowerVR consumer services. [2025-09-24 00:44:34.699] Waiting data available... [2025-09-24 00:44:34.699] 512+0 records in [2025-09-24 00:44:34.699] 512+0 records out [2025-09-24 00:44:34.747] Starting syslogd/klogd: done [2025-09-24 00:44:34.763] DML Start [2025-09-24 00:44:34.923] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:44:35.163] DML res1: 0 [2025-09-24 00:44:35.639] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:44:35.639] Read Success [2025-09-24 00:44:35.639] Verifying certificate... [2025-09-24 00:44:35.911] Verified OK [2025-09-24 00:44:35.927] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:44:37.719] Verified OK [2025-09-24 00:44:37.719] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:44:38.256] Verified OK [2025-09-24 00:44:38.256] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:44:40.734] fs.protected_hardlinks = 1 [2025-09-24 00:44:40.734] fs.protected_symlinks = 1 [2025-09-24 00:44:40.750] kernel.modules_disabled = 1 [2025-09-24 00:44:40.941] [2025-09-24 00:44:40.941] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:44:42.217] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:44:49.976] SBL1:1210.0.1.0 [2025-09-24 00:44:50.024] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:44:51.590] SBL2:1210.0.1.0 [2025-09-24 00:44:51.638] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:44:51.750] j-A [2025-09-24 00:44:59.088] The R5 Autosar Classic is running [2025-09-24 00:44:59.119] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:44:59.119] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:44:59.727] INIT: version 2.96 booting [2025-09-24 00:44:59.838] INIT: Entering runlevel: 5 [2025-09-24 00:44:59.983] mtd32 attached [2025-09-24 00:44:59.999] mtd28 attached [2025-09-24 00:45:00.015] mtd24 attached [2025-09-24 00:45:00.062] RTNETLINK answers: File exists [2025-09-24 00:45:00.062] ubi2:textures is mounted. [2025-09-24 00:45:00.118] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:45:00.118] ubi0:dml_code is mounted. [2025-09-24 00:45:00.118] ubi1:animations is mounted. [2025-09-24 00:45:00.118] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:45:00.118] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:45:00.118] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:45:00.118] data.LB_FadeInType0=100 [2025-09-24 00:45:00.118] data.CHLH_FadeInType0=0 [2025-09-24 00:45:00.118] data.WU_FadeInDelay=0 [2025-09-24 00:45:00.118] max_time_out=0 [2025-09-24 00:45:00.118] No splash screen [2025-09-24 00:45:00.118] stop dss Done [2025-09-24 00:45:00.118] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:45:00.150] /dev/mem opened. [2025-09-24 00:45:00.150] Memory mapped at address 0xffffacf45000. [2025-09-24 00:45:00.183] Read at address 0x00600018 (0xffffacf45018): 0x00000000 [2025-09-24 00:45:00.183] Write at address 0x00600018 (0xffffacf45018): 0x00400040, readback 0x00400040 [2025-09-24 00:45:00.183] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:45:00.183] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:45:00.438] Waiting data available... [2025-09-24 00:45:00.438] Loaded PowerVR consumer services. [2025-09-24 00:45:00.487] 512+0 records in [2025-09-24 00:45:00.487] 512+0 records out [2025-09-24 00:45:00.503] Starting syslogd/klogd: done [2025-09-24 00:45:00.535] DML Start [2025-09-24 00:45:00.678] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:45:00.934] DML res1: 0 [2025-09-24 00:45:01.379] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:45:01.379] Read Success [2025-09-24 00:45:01.379] Verifying certificate... [2025-09-24 00:45:01.667] Verified OK [2025-09-24 00:45:01.683] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:45:03.266] Verified OK [2025-09-24 00:45:03.282] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:45:03.928] Verified OK [2025-09-24 00:45:03.928] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:45:06.567] fs.protected_hardlinks = 1 [2025-09-24 00:45:06.567] fs.protected_symlinks = 1 [2025-09-24 00:45:06.583] kernel.modules_disabled = 1 [2025-09-24 00:45:06.759] [2025-09-24 00:45:06.759] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:45:08.005] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:45:15.798] SBL1:1210.0.1.0 [2025-09-24 00:45:15.830] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:45:17.413] SBL2:1210.0.1.0 [2025-09-24 00:45:17.445] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:45:17.557] j-A [2025-09-24 00:45:24.911] The R5 Autosar Classic is running [2025-09-24 00:45:24.911] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:45:24.931] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:45:25.539] INIT: version 2.96 booting [2025-09-24 00:45:25.651] INIT: Entering runlevel: 5 [2025-09-24 00:45:25.795] mtd24 attached [2025-09-24 00:45:25.811] mtd28 attached [2025-09-24 00:45:25.827] mtd32 attached [2025-09-24 00:45:25.875] ubi0:textures is mounted. [2025-09-24 00:45:25.875] RTNETLINK answers: File exists [2025-09-24 00:45:25.937] ubi1:animations is mounted. [2025-09-24 00:45:25.937] ubi2:dml_code is mounted. [2025-09-24 00:45:25.937] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:45:25.937] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:45:25.937] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:45:25.937] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:45:25.937] data.LB_FadeInType0=100 [2025-09-24 00:45:25.937] data.CHLH_FadeInType0=0 [2025-09-24 00:45:25.937] data.WU_FadeInDelay=0 [2025-09-24 00:45:25.937] max_time_out=0 [2025-09-24 00:45:25.937] No splash screen [2025-09-24 00:45:25.937] stop dss Done [2025-09-24 00:45:25.937] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:45:26.007] /dev/mem opened. [2025-09-24 00:45:26.007] Memory mapped at address 0xffff8e5e7000. [2025-09-24 00:45:26.007] Read at address 0x00600018 (0xffff8e5e7018): 0x00000000 [2025-09-24 00:45:26.007] Write at address 0x00600018 (0xffff8e5e7018): 0x00400040, readback 0x00400040 [2025-09-24 00:45:26.055] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:45:26.072] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:45:26.279] Loaded PowerVR consumer services. [2025-09-24 00:45:26.279] Waiting data available... [2025-09-24 00:45:26.296] 512+0 records in [2025-09-24 00:45:26.296] 512+0 records out [2025-09-24 00:45:26.344] Starting syslogd/klogd: done [2025-09-24 00:45:26.360] DML Start [2025-09-24 00:45:26.535] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:45:26.759] DML res1: 0 [2025-09-24 00:45:27.171] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:45:27.171] Read Success [2025-09-24 00:45:27.171] Verifying certificate... [2025-09-24 00:45:27.443] Verified OK [2025-09-24 00:45:27.458] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:45:29.088] Verified OK [2025-09-24 00:45:29.088] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:45:29.736] Verified OK [2025-09-24 00:45:29.736] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:45:32.439] fs.protected_hardlinks = 1 [2025-09-24 00:45:32.439] fs.protected_symlinks = 1 [2025-09-24 00:45:32.455] kernel.modules_disabled = 1 [2025-09-24 00:45:32.647] [2025-09-24 00:45:32.647] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:45:33.837] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:45:41.588] SBL1:1210.0.1.0 [2025-09-24 00:45:41.636] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:45:43.202] SBL2:1210.0.1.0 [2025-09-24 00:45:43.250] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:45:43.347] j-A [2025-09-24 00:45:50.700] The R5 Autosar Classic is running [2025-09-24 00:45:50.725] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:45:50.725] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:45:51.332] INIT: version 2.96 booting [2025-09-24 00:45:51.444] INIT: Entering runlevel: 5 [2025-09-24 00:45:51.588] mtd24 attached [2025-09-24 00:45:51.604] mtd28 attached [2025-09-24 00:45:51.620] mtd32 attached [2025-09-24 00:45:51.652] ubi0:textures is mounted. [2025-09-24 00:45:51.668] RTNETLINK answers: File exists [2025-09-24 00:45:51.725] ubi1:animations is mounted. [2025-09-24 00:45:51.725] ubi2:dml_code is mounted. [2025-09-24 00:45:51.725] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:45:51.725] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:45:51.725] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:45:51.725] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:45:51.725] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:45:51.725] data.LB_FadeInType0=100 [2025-09-24 00:45:51.725] data.CHLH_FadeInType0=0 [2025-09-24 00:45:51.725] data.WU_FadeInDelay=0 [2025-09-24 00:45:51.725] max_time_out=0 [2025-09-24 00:45:51.725] No splash screen [2025-09-24 00:45:51.725] stop dss Done [2025-09-24 00:45:51.772] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:45:51.813] /dev/mem opened. [2025-09-24 00:45:51.813] Memory mapped at address 0xffff86c54000. [2025-09-24 00:45:51.813] Read at address 0x00600018 (0xffff86c54018): 0x00000000 [2025-09-24 00:45:51.813] Write at address 0x00600018 (0xffff86c54018): 0x00400040, readback 0x00400040 [2025-09-24 00:45:51.813] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:45:51.974] Loaded PowerVR consumer services. [2025-09-24 00:45:52.101] Waiting data available... [2025-09-24 00:45:52.101] 512+0 records in [2025-09-24 00:45:52.101] 512+0 records out [2025-09-24 00:45:52.117] Starting syslogd/klogd: done [2025-09-24 00:45:52.133] DML Start [2025-09-24 00:45:52.325] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:45:52.565] DML res1: 0 [2025-09-24 00:45:52.900] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:45:52.916] Read Success [2025-09-24 00:45:52.916] Verifying certificate... [2025-09-24 00:45:53.187] Verified OK [2025-09-24 00:45:53.204] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:45:54.995] Verified OK [2025-09-24 00:45:54.995] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:45:55.529] Verified OK [2025-09-24 00:45:55.529] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:45:57.944] fs.protected_hardlinks = 1 [2025-09-24 00:45:57.944] fs.protected_symlinks = 1 [2025-09-24 00:45:57.961] kernel.modules_disabled = 1 [2025-09-24 00:45:58.152] [2025-09-24 00:45:58.152] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:45:59.629] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:46:07.389] SBL1:1210.0.1.0 [2025-09-24 00:46:07.437] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:46:09.004] SBL2:1210.0.1.0 [2025-09-24 00:46:09.052] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:46:09.148] j-A [2025-09-24 00:46:16.502] The R5 Autosar Classic is running [2025-09-24 00:46:16.527] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:46:16.527] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:46:17.134] INIT: version 2.96 booting [2025-09-24 00:46:17.246] INIT: Entering runlevel: 5 [2025-09-24 00:46:17.406] mtd28 attached [2025-09-24 00:46:17.422] mtd24 attached [2025-09-24 00:46:17.422] mtd32 attached [2025-09-24 00:46:17.470] RTNETLINK answers: File exists [2025-09-24 00:46:17.470] ubi0:animations is mounted. [2025-09-24 00:46:17.518] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:46:17.518] ubi1:textures is mounted. [2025-09-24 00:46:17.518] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:46:17.518] ubi2:dml_code is mounted. [2025-09-24 00:46:17.518] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:46:17.518] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:46:17.518] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:46:17.540] data.LB_FadeInType0=100 [2025-09-24 00:46:17.540] data.CHLH_FadeInType0=0 [2025-09-24 00:46:17.540] data.WU_FadeInDelay=0 [2025-09-24 00:46:17.540] max_time_out=0 [2025-09-24 00:46:17.540] No splash screen [2025-09-24 00:46:17.540] stop dss Done [2025-09-24 00:46:17.565] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:46:17.565] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:46:17.620] /dev/mem opened. [2025-09-24 00:46:17.620] Memory mapped at address 0xffff946b5000. [2025-09-24 00:46:17.620] Read at address 0x00600018 (0xffff946b5018): 0x00000000 [2025-09-24 00:46:17.620] Write at address 0x00600018 (0xffff946b5018): 0x00400040, readback 0x00400040 [2025-09-24 00:46:17.843] Loaded PowerVR consumer services. [2025-09-24 00:46:17.892] Waiting data available... [2025-09-24 00:46:17.909] 512+0 records in [2025-09-24 00:46:17.909] 512+0 records out [2025-09-24 00:46:17.956] Starting syslogd/klogd: done [2025-09-24 00:46:17.971] DML Start [2025-09-24 00:46:18.148] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:46:18.388] DML res1: 0 [2025-09-24 00:46:18.787] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:46:18.803] Read Success [2025-09-24 00:46:18.803] Verifying certificate... [2025-09-24 00:46:19.075] Verified OK [2025-09-24 00:46:19.091] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:46:20.763] Verified OK [2025-09-24 00:46:20.763] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:46:21.337] Verified OK [2025-09-24 00:46:21.337] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:46:23.847] fs.protected_hardlinks = 1 [2025-09-24 00:46:23.863] fs.protected_symlinks = 1 [2025-09-24 00:46:23.863] kernel.modules_disabled = 1 [2025-09-24 00:46:24.071] [2025-09-24 00:46:24.071] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:46:25.485] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:46:33.189] SBL1:1210.0.1.0 [2025-09-24 00:46:33.238] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:46:34.820] SBL2:1210.0.1.0 [2025-09-24 00:46:34.852] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:46:34.964] j-A [2025-09-24 00:46:42.334] The R5 Autosar Classic is running [2025-09-24 00:46:42.334] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:46:42.334] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:46:42.942] INIT: version 2.96 booting [2025-09-24 00:46:43.038] INIT: Entering runlevel: 5 [2025-09-24 00:46:43.198] mtd28 attached [2025-09-24 00:46:43.214] mtd32 attached [2025-09-24 00:46:43.214] mtd24 attached [2025-09-24 00:46:43.262] ubi0:animations is mounted. [2025-09-24 00:46:43.332] RTNETLINK answers: File exists [2025-09-24 00:46:43.332] ubi1:dml_code is mounted. [2025-09-24 00:46:43.332] ubi2:textures is mounted. [2025-09-24 00:46:43.332] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:46:43.332] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:46:43.332] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:46:43.332] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:46:43.332] data.LB_FadeInType0=100 [2025-09-24 00:46:43.332] data.CHLH_FadeInType0=0 [2025-09-24 00:46:43.332] data.WU_FadeInDelay=0 [2025-09-24 00:46:43.332] max_time_out=0 [2025-09-24 00:46:43.332] No splash screen [2025-09-24 00:46:43.332] stop dss Done [2025-09-24 00:46:43.332] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:46:43.405] /dev/mem opened. [2025-09-24 00:46:43.405] Memory mapped at address 0xffffa0487000. [2025-09-24 00:46:43.405] Read at address 0x00600018 (0xffffa0487018): 0x00000000 [2025-09-24 00:46:43.405] Write at address 0x00600018 (0xffffa0487018): 0x00400040, readback 0x00400040 [2025-09-24 00:46:43.405] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:46:43.421] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:46:43.501] Loaded PowerVR consumer services. [2025-09-24 00:46:43.660] 512+0 records in [2025-09-24 00:46:43.660] 512+0 records out [2025-09-24 00:46:43.660] Waiting data available... [2025-09-24 00:46:43.676] Starting syslogd/klogd: done [2025-09-24 00:46:43.692] DML Start [2025-09-24 00:46:43.883] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:46:44.123] DML res1: 0 [2025-09-24 00:46:44.490] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:46:44.506] Read Success [2025-09-24 00:46:44.506] Verifying certificate... [2025-09-24 00:46:44.746] Verified OK [2025-09-24 00:46:44.762] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:46:46.233] Verified OK [2025-09-24 00:46:46.249] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:46:46.928] Verified OK [2025-09-24 00:46:46.928] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:46:49.774] fs.protected_hardlinks = 1 [2025-09-24 00:46:49.774] fs.protected_symlinks = 1 [2025-09-24 00:46:49.790] kernel.modules_disabled = 1 [2025-09-24 00:46:49.982] [2025-09-24 00:46:49.982] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:46:51.197] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:46:58.993] SBL1:1210.0.1.0 [2025-09-24 00:46:59.041] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:47:00.609] SBL2:1210.0.1.0 [2025-09-24 00:47:00.656] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:47:00.768] j-A [2025-09-24 00:47:08.107] The R5 Autosar Classic is running [2025-09-24 00:47:08.132] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:47:08.132] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:47:08.739] INIT: version 2.96 booting [2025-09-24 00:47:08.852] INIT: Entering runlevel: 5 [2025-09-24 00:47:09.011] mtd28 attached [2025-09-24 00:47:09.011] mtd24 attached [2025-09-24 00:47:09.027] mtd32 attached [2025-09-24 00:47:09.059] ubi0:animations is mounted. [2025-09-24 00:47:09.075] RTNETLINK answers: File exists [2025-09-24 00:47:09.140] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:47:09.140] ubi1:textures is mounted. [2025-09-24 00:47:09.140] ubi2:dml_code is mounted. [2025-09-24 00:47:09.140] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:47:09.140] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:47:09.140] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:47:09.140] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:47:09.140] data.LB_FadeInType0=100 [2025-09-24 00:47:09.140] data.CHLH_FadeInType0=0 [2025-09-24 00:47:09.140] data.WU_FadeInDelay=0 [2025-09-24 00:47:09.140] max_time_out=0 [2025-09-24 00:47:09.140] No splash screen [2025-09-24 00:47:09.140] stop dss Done [2025-09-24 00:47:09.156] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:47:09.172] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:47:09.208] /dev/mem opened. [2025-09-24 00:47:09.208] Memory mapped at address 0xffff945e5000. [2025-09-24 00:47:09.208] Read at address 0x00600018 (0xffff945e5018): 0x00000000 [2025-09-24 00:47:09.208] Write at address 0x00600018 (0xffff945e5018): 0x00400040, readback 0x00400040 [2025-09-24 00:47:09.432] Loaded PowerVR consumer services. [2025-09-24 00:47:09.496] Waiting data available... [2025-09-24 00:47:09.496] 512+0 records in [2025-09-24 00:47:09.496] 512+0 records out [2025-09-24 00:47:09.528] Starting syslogd/klogd: done [2025-09-24 00:47:09.544] DML Start [2025-09-24 00:47:09.720] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:47:09.960] DML res1: 0 [2025-09-24 00:47:10.369] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:47:10.369] Read Success [2025-09-24 00:47:10.369] Verifying certificate... [2025-09-24 00:47:10.640] Verified OK [2025-09-24 00:47:10.656] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:47:12.333] Verified OK [2025-09-24 00:47:12.333] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:47:12.940] Verified OK [2025-09-24 00:47:12.940] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:47:15.562] fs.protected_hardlinks = 1 [2025-09-24 00:47:15.562] fs.protected_symlinks = 1 [2025-09-24 00:47:15.578] kernel.modules_disabled = 1 [2025-09-24 00:47:15.770] [2025-09-24 00:47:15.770] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:47:16.990] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:47:24.806] SBL1:1210.0.1.0 [2025-09-24 00:47:24.854] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:47:26.421] SBL2:1210.0.1.0 [2025-09-24 00:47:26.468] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:47:26.564] j-A [2025-09-24 00:47:33.921] The R5 Autosar Classic is running [2025-09-24 00:47:33.943] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:47:33.943] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:47:34.550] INIT: version 2.96 booting [2025-09-24 00:47:34.662] INIT: Entering runlevel: 5 [2025-09-24 00:47:34.821] mtd24 attached [2025-09-24 00:47:34.821] mtd28 attached [2025-09-24 00:47:34.870] mtd32 attached [2025-09-24 00:47:34.928] ubi0:textures is mounted. [2025-09-24 00:47:34.928] ubi1:animations is mounted. [2025-09-24 00:47:34.928] RTNETLINK answers: File exists [2025-09-24 00:47:34.928] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:47:34.928] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:47:34.928] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:47:34.928] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:47:34.928] ubi2:dml_code is mounted. [2025-09-24 00:47:34.928] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:47:34.955] data.LB_FadeInType0=100 [2025-09-24 00:47:34.955] data.CHLH_FadeInType0=0 [2025-09-24 00:47:34.955] data.WU_FadeInDelay=0 [2025-09-24 00:47:34.955] max_time_out=0 [2025-09-24 00:47:34.955] No splash screen [2025-09-24 00:47:34.955] stop dss Done [2025-09-24 00:47:34.985] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:47:34.985] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:47:35.034] /dev/mem opened. [2025-09-24 00:47:35.034] Memory mapped at address 0xffff947cc000. [2025-09-24 00:47:35.034] Read at address 0x00600018 (0xffff947cc018): 0x00000000 [2025-09-24 00:47:35.034] Write at address 0x00600018 (0xffff947cc018): 0x00400040, readback 0x00400040 [2025-09-24 00:47:35.130] Loaded PowerVR consumer services. [2025-09-24 00:47:35.289] Waiting data available... [2025-09-24 00:47:35.321] 512+0 records in [2025-09-24 00:47:35.321] 512+0 records out [2025-09-24 00:47:35.337] Starting syslogd/klogd: done [2025-09-24 00:47:35.353] DML Start [2025-09-24 00:47:35.498] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:47:35.738] DML res1: 0 [2025-09-24 00:47:36.245] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:47:36.245] Read Success [2025-09-24 00:47:36.245] Verifying certificate... [2025-09-24 00:47:36.484] Verified OK [2025-09-24 00:47:36.517] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:47:38.154] Verified OK [2025-09-24 00:47:38.154] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:47:38.786] Verified OK [2025-09-24 00:47:38.786] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:47:41.296] fs.protected_hardlinks = 1 [2025-09-24 00:47:41.312] fs.protected_symlinks = 1 [2025-09-24 00:47:41.312] kernel.modules_disabled = 1 [2025-09-24 00:47:41.488] [2025-09-24 00:47:41.488] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:47:42.792] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:47:50.615] SBL1:1210.0.1.0 [2025-09-24 00:47:50.663] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:47:52.230] SBL2:1210.0.1.0 [2025-09-24 00:47:52.278] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:47:52.373] j-A [2025-09-24 00:47:59.729] The R5 Autosar Classic is running [2025-09-24 00:47:59.729] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:47:59.750] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:48:00.358] INIT: version 2.96 booting [2025-09-24 00:48:00.470] INIT: Entering runlevel: 5 [2025-09-24 00:48:00.614] mtd24 attached [2025-09-24 00:48:00.630] mtd28 attached [2025-09-24 00:48:00.646] mtd32 attached [2025-09-24 00:48:00.662] ubi0:textures is mounted. [2025-09-24 00:48:00.678] ubi1:animations is mounted. [2025-09-24 00:48:00.694] RTNETLINK answers: File exists [2025-09-24 00:48:00.694] ubi2:dml_code is mounted. [2025-09-24 00:48:00.710] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:48:00.748] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:48:00.748] data.LB_FadeInType0=100 [2025-09-24 00:48:00.748] data.CHLH_FadeInType0=0 [2025-09-24 00:48:00.748] data.WU_FadeInDelay=0 [2025-09-24 00:48:00.748] max_time_out=0 [2025-09-24 00:48:00.748] No splash screen [2025-09-24 00:48:00.748] stop dss Done [2025-09-24 00:48:00.748] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:48:00.748] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:48:00.764] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:48:00.780] /dev/mem opened. [2025-09-24 00:48:00.780] Memory mapped at address 0xffff87615000. [2025-09-24 00:48:00.806] Read at address 0x00600018 (0xffff87615018): 0x00000000 [2025-09-24 00:48:00.806] Write at address 0x00600018 (0xffff87615018): 0x00400040, readback 0x00400040 [2025-09-24 00:48:00.837] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:48:00.853] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:48:00.982] Loaded PowerVR consumer services. [2025-09-24 00:48:01.093] Waiting data available... [2025-09-24 00:48:01.109] 512+0 records in [2025-09-24 00:48:01.109] 512+0 records out [2025-09-24 00:48:01.126] Starting syslogd/klogd: done [2025-09-24 00:48:01.158] DML Start [2025-09-24 00:48:01.349] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:48:01.525] DML res1: 0 [2025-09-24 00:48:02.030] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:48:02.030] Read Success [2025-09-24 00:48:02.030] Verifying certificate... [2025-09-24 00:48:02.254] Verified OK [2025-09-24 00:48:02.270] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:48:03.784] Verified OK [2025-09-24 00:48:03.784] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:48:04.435] Verified OK [2025-09-24 00:48:04.435] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:48:07.152] fs.protected_hardlinks = 1 [2025-09-24 00:48:07.152] fs.protected_symlinks = 1 [2025-09-24 00:48:07.152] kernel.modules_disabled = 1 [2025-09-24 00:48:07.360] [2025-09-24 00:48:07.360] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:48:08.584] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:48:16.441] SBL1:1210.0.1.0 [2025-09-24 00:48:16.473] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:48:18.057] SBL2:1210.0.1.0 [2025-09-24 00:48:18.088] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:48:18.201] j-A [2025-09-24 00:48:25.576] The R5 Autosar Classic is running [2025-09-24 00:48:25.576] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:48:25.576] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:48:26.183] INIT: version 2.96 booting [2025-09-24 00:48:26.295] INIT: Entering runlevel: 5 [2025-09-24 00:48:26.439] mtd28 attached [2025-09-24 00:48:26.455] mtd32 attached [2025-09-24 00:48:26.471] mtd24 attached [2025-09-24 00:48:26.568] ubi1:dml_code is mounted. [2025-09-24 00:48:26.568] ubi0:animations is mounted. [2025-09-24 00:48:26.568] RTNETLINK answers: File exists [2025-09-24 00:48:26.568] ubi2:textures is mounted. [2025-09-24 00:48:26.568] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:48:26.568] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:48:26.568] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:48:26.568] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:48:26.568] data.LB_FadeInType0=100 [2025-09-24 00:48:26.568] data.CHLH_FadeInType0=0 [2025-09-24 00:48:26.568] data.WU_FadeInDelay=0 [2025-09-24 00:48:26.568] max_time_out=0 [2025-09-24 00:48:26.568] No splash screen [2025-09-24 00:48:26.568] stop dss Done [2025-09-24 00:48:26.568] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:48:26.634] /dev/mem opened. [2025-09-24 00:48:26.634] Memory mapped at address 0xffffae6f0000. [2025-09-24 00:48:26.634] Read at address 0x00600018 (0xffffae6f0018): 0x00000000 [2025-09-24 00:48:26.634] Write at address 0x00600018 (0xffffae6f0018): 0x00400040, readback 0x00400040 [2025-09-24 00:48:26.650] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:48:26.666] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:48:26.794] Loaded PowerVR consumer services. [2025-09-24 00:48:26.906] Waiting data available... [2025-09-24 00:48:26.922] 512+0 records in [2025-09-24 00:48:26.922] 512+0 records out [2025-09-24 00:48:26.970] Starting syslogd/klogd: done [2025-09-24 00:48:27.002] DML Start [2025-09-24 00:48:27.178] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:48:27.385] DML res1: 0 [2025-09-24 00:48:27.849] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:48:27.865] Read Success [2025-09-24 00:48:27.865] Verifying certificate... [2025-09-24 00:48:28.073] Verified OK [2025-09-24 00:48:28.089] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:48:29.760] Verified OK [2025-09-24 00:48:29.760] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:48:30.288] Verified OK [2025-09-24 00:48:30.309] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:48:32.850] fs.protected_hardlinks = 1 [2025-09-24 00:48:32.850] fs.protected_symlinks = 1 [2025-09-24 00:48:32.850] kernel.modules_disabled = 1 [2025-09-24 00:48:33.042] [2025-09-24 00:48:33.042] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:48:34.445] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:48:42.230] SBL1:1210.0.1.0 [2025-09-24 00:48:42.278] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:48:43.844] SBL2:1210.0.1.0 [2025-09-24 00:48:43.892] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:48:43.988] j-A [2025-09-24 00:48:51.342] The R5 Autosar Classic is running [2025-09-24 00:48:51.342] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:48:51.363] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:48:51.971] INIT: version 2.96 booting [2025-09-24 00:48:52.084] INIT: Entering runlevel: 5 [2025-09-24 00:48:52.227] mtd28 attached [2025-09-24 00:48:52.243] mtd24 attached [2025-09-24 00:48:52.275] mtd32 attached [2025-09-24 00:48:52.275] ubi0:animations is mounted. [2025-09-24 00:48:52.291] ubi1:textures is mounted. [2025-09-24 00:48:52.307] RTNETLINK answers: File exists [2025-09-24 00:48:52.361] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:48:52.361] ubi2:dml_code is mounted. [2025-09-24 00:48:52.361] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:48:52.361] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:48:52.361] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:48:52.361] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:48:52.361] data.LB_FadeInType0=100 [2025-09-24 00:48:52.361] data.CHLH_FadeInType0=0 [2025-09-24 00:48:52.361] data.WU_FadeInDelay=0 [2025-09-24 00:48:52.361] max_time_out=0 [2025-09-24 00:48:52.361] No splash screen [2025-09-24 00:48:52.361] stop dss Done [2025-09-24 00:48:52.403] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:48:52.403] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:48:52.403] /dev/mem opened. [2025-09-24 00:48:52.403] Memory mapped at address 0xffffb8157000. [2025-09-24 00:48:52.430] Read at address 0x00600018 (0xffffb8157018): 0x00000000 [2025-09-24 00:48:52.430] Write at address 0x00600018 (0xffffb8157018): 0x00400040, readback 0x00400040 [2025-09-24 00:48:52.541] Loaded PowerVR consumer services. [2025-09-24 00:48:52.685] Waiting data available... [2025-09-24 00:48:52.701] 512+0 records in [2025-09-24 00:48:52.701] 512+0 records out [2025-09-24 00:48:52.733] Starting syslogd/klogd: done [2025-09-24 00:48:52.749] DML Start [2025-09-24 00:48:52.909] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:48:53.149] DML res1: 0 [2025-09-24 00:48:53.625] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:48:53.625] Read Success [2025-09-24 00:48:53.625] Verifying certificate... [2025-09-24 00:48:53.881] Verified OK [2025-09-24 00:48:53.897] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:48:55.656] Verified OK [2025-09-24 00:48:55.656] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:48:56.260] Verified OK [2025-09-24 00:48:56.260] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:48:58.755] fs.protected_hardlinks = 1 [2025-09-24 00:48:58.755] fs.protected_symlinks = 1 [2025-09-24 00:48:58.771] kernel.modules_disabled = 1 [2025-09-24 00:48:58.962] [2025-09-24 00:48:58.962] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:49:00.205] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:49:08.049] SBL1:1210.0.1.0 [2025-09-24 00:49:08.081] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:49:09.663] SBL2:1210.0.1.0 [2025-09-24 00:49:09.695] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:49:09.807] j-A [2025-09-24 00:49:17.161] The R5 Autosar Classic is running [2025-09-24 00:49:17.161] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:49:17.182] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:49:17.790] INIT: version 2.96 booting [2025-09-24 00:49:17.901] INIT: Entering runlevel: 5 [2025-09-24 00:49:18.046] mtd32 attached [2025-09-24 00:49:18.062] mtd24 attached [2025-09-24 00:49:18.078] mtd28 attached [2025-09-24 00:49:18.125] RTNETLINK answers: File exists [2025-09-24 00:49:18.125] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:49:18.158] ubi2:animations is mounted. [2025-09-24 00:49:18.158] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:49:18.158] ubi1:textures is mounted. [2025-09-24 00:49:18.158] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:49:18.158] ubi0:dml_code is mounted. [2025-09-24 00:49:18.158] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:49:18.158] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:49:18.183] data.LB_FadeInType0=100 [2025-09-24 00:49:18.183] data.CHLH_FadeInType0=0 [2025-09-24 00:49:18.183] data.WU_FadeInDelay=0 [2025-09-24 00:49:18.183] max_time_out=0 [2025-09-24 00:49:18.183] No splash screen [2025-09-24 00:49:18.183] stop dss Done [2025-09-24 00:49:18.215] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:49:18.231] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:49:18.270] /dev/mem opened. [2025-09-24 00:49:18.270] Memory mapped at address 0xffff8c9bd000. [2025-09-24 00:49:18.270] Read at address 0x00600018 (0xffff8c9bd018): 0x00000000 [2025-09-24 00:49:18.270] Write at address 0x00600018 (0xffff8c9bd018): 0x00400040, readback 0x00400040 [2025-09-24 00:49:18.462] Loaded PowerVR consumer services. [2025-09-24 00:49:18.542] Waiting data available... [2025-09-24 00:49:18.558] 512+0 records in [2025-09-24 00:49:18.558] 512+0 records out [2025-09-24 00:49:18.574] Starting syslogd/klogd: done [2025-09-24 00:49:19.149] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:49:19.149] Read Success [2025-09-24 00:49:19.165] Verifying certificate... [2025-09-24 00:49:19.357] Verified OK [2025-09-24 00:49:19.373] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:49:20.317] Verified OK [2025-09-24 00:49:20.317] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:49:20.748] Verified OK [2025-09-24 00:49:20.748] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:49:23.781] fs.protected_hardlinks = 1 [2025-09-24 00:49:23.781] fs.protected_symlinks = 1 [2025-09-24 00:49:23.782] kernel.modules_disabled = 1 [2025-09-24 00:49:23.941] [2025-09-24 00:49:23.941] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:49:26.507] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:49:33.820] SBL1:1210.0.1.0 [2025-09-24 00:49:33.868] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:49:35.433] SBL2:1210.0.1.0 [2025-09-24 00:49:35.482] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:49:35.594] j-A [2025-09-24 00:49:42.932] The R5 Autosar Classic is running [2025-09-24 00:49:42.963] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:49:42.963] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:49:43.570] INIT: version 2.96 booting [2025-09-24 00:49:43.681] INIT: Entering runlevel: 5 [2025-09-24 00:49:43.826] mtd24 attached [2025-09-24 00:49:43.826] mtd28 attached [2025-09-24 00:49:43.842] mtd32 attached [2025-09-24 00:49:43.889] RTNETLINK answers: File exists [2025-09-24 00:49:43.951] ubi1:animations is mounted. [2025-09-24 00:49:43.951] ubi0:textures is mounted. [2025-09-24 00:49:43.951] ubi2:dml_code is mounted. [2025-09-24 00:49:43.951] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:49:43.951] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:49:43.951] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:49:43.951] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:49:43.951] data.LB_FadeInType0=100 [2025-09-24 00:49:43.951] data.CHLH_FadeInType0=0 [2025-09-24 00:49:43.951] data.WU_FadeInDelay=0 [2025-09-24 00:49:43.951] max_time_out=0 [2025-09-24 00:49:43.951] No splash screen [2025-09-24 00:49:43.951] stop dss Done [2025-09-24 00:49:43.951] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:49:44.031] /dev/mem opened. [2025-09-24 00:49:44.031] Memory mapped at address 0xffff916d9000. [2025-09-24 00:49:44.031] Read at address 0x00600018 (0xffff916d9018): 0x00000000 [2025-09-24 00:49:44.031] Write at address 0x00600018 (0xffff916d9018): 0x00400040, readback 0x00400040 [2025-09-24 00:49:44.031] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:49:44.031] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:49:44.127] Loaded PowerVR consumer services. [2025-09-24 00:49:44.286] Waiting data available... [2025-09-24 00:49:44.302] 512+0 records in [2025-09-24 00:49:44.302] 512+0 records out [2025-09-24 00:49:44.366] Starting syslogd/klogd: done [2025-09-24 00:49:44.382] DML Start [2025-09-24 00:49:44.558] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:49:44.750] DML res1: 0 [2025-09-24 00:49:45.237] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:49:45.237] Read Success [2025-09-24 00:49:45.237] Verifying certificate... [2025-09-24 00:49:45.477] Verified OK [2025-09-24 00:49:45.509] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:49:47.161] Verified OK [2025-09-24 00:49:47.161] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:49:47.829] Verified OK [2025-09-24 00:49:47.829] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:49:50.403] fs.protected_hardlinks = 1 [2025-09-24 00:49:50.403] fs.protected_symlinks = 1 [2025-09-24 00:49:50.403] kernel.modules_disabled = 1 [2025-09-24 00:49:50.595] [2025-09-24 00:49:50.595] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:49:51.779] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:49:59.610] SBL1:1210.0.1.0 [2025-09-24 00:49:59.658] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:50:01.225] SBL2:1210.0.1.0 [2025-09-24 00:50:01.273] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:50:01.384] j-A [2025-09-24 00:50:08.754] The R5 Autosar Classic is running [2025-09-24 00:50:08.754] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:50:08.754] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:50:09.361] INIT: version 2.96 booting [2025-09-24 00:50:09.473] INIT: Entering runlevel: 5 [2025-09-24 00:50:09.633] mtd28 attached [2025-09-24 00:50:09.633] mtd24 attached [2025-09-24 00:50:09.649] mtd32 attached [2025-09-24 00:50:09.681] ubi0:animations is mounted. [2025-09-24 00:50:09.697] RTNETLINK answers: File exists [2025-09-24 00:50:09.753] ubi1:textures is mounted. [2025-09-24 00:50:09.753] ubi2:dml_code is mounted. [2025-09-24 00:50:09.753] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:50:09.753] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:50:09.753] data.LB_FadeInType0=100 [2025-09-24 00:50:09.753] data.CHLH_FadeInType0=0 [2025-09-24 00:50:09.753] data.WU_FadeInDelay=0 [2025-09-24 00:50:09.753] max_time_out=0 [2025-09-24 00:50:09.753] No splash screen [2025-09-24 00:50:09.753] stop dss Done [2025-09-24 00:50:09.753] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:50:09.753] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:50:09.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:50:09.785] /dev/mem opened. [2025-09-24 00:50:09.821] Memory mapped at address 0xffffae91c000. [2025-09-24 00:50:09.821] Read at address 0x00600018 (0xffffae91c018): 0x00000000 [2025-09-24 00:50:09.821] Write at address 0x00600018 (0xffffae91c018): 0x00400040, readback 0x00400040 [2025-09-24 00:50:09.837] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:50:09.853] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:50:10.093] Waiting data available... [2025-09-24 00:50:10.109] Loaded PowerVR consumer services. [2025-09-24 00:50:10.141] 512+0 records in [2025-09-24 00:50:10.141] 512+0 records out [2025-09-24 00:50:10.173] Starting syslogd/klogd: done [2025-09-24 00:50:10.189] DML Start [2025-09-24 00:50:10.397] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:50:10.636] DML res1: 0 [2025-09-24 00:50:11.010] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:50:11.010] Read Success [2025-09-24 00:50:11.010] Verifying certificate... [2025-09-24 00:50:11.266] Verified OK [2025-09-24 00:50:11.282] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:50:12.957] Verified OK [2025-09-24 00:50:12.957] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:50:13.517] Verified OK [2025-09-24 00:50:13.517] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:50:16.123] fs.protected_hardlinks = 1 [2025-09-24 00:50:16.123] fs.protected_symlinks = 1 [2025-09-24 00:50:16.139] kernel.modules_disabled = 1 [2025-09-24 00:50:16.331] [2025-09-24 00:50:16.331] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:50:17.694] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:50:25.410] SBL1:1210.0.1.0 [2025-09-24 00:50:25.458] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:50:27.025] SBL2:1210.0.1.0 [2025-09-24 00:50:27.073] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:50:27.169] j-A [2025-09-24 00:50:34.523] The R5 Autosar Classic is running [2025-09-24 00:50:34.547] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:50:34.547] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:50:35.155] INIT: version 2.96 booting [2025-09-24 00:50:35.266] INIT: Entering runlevel: 5 [2025-09-24 00:50:35.410] mtd24 attached [2025-09-24 00:50:35.426] mtd32 attached [2025-09-24 00:50:35.443] mtd28 attached [2025-09-24 00:50:35.475] ubi0:textures is mounted. [2025-09-24 00:50:35.491] RTNETLINK answers: File exists [2025-09-24 00:50:35.551] ubi2:animations is mounted. [2025-09-24 00:50:35.551] ubi1:dml_code is mounted. [2025-09-24 00:50:35.551] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:50:35.551] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:50:35.551] data.LB_FadeInType0=100 [2025-09-24 00:50:35.551] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:50:35.551] data.CHLH_FadeInType0=0 [2025-09-24 00:50:35.551] data.WU_FadeInDelay=0 [2025-09-24 00:50:35.551] max_time_out=0 [2025-09-24 00:50:35.551] No splash screen [2025-09-24 00:50:35.551] stop dss Done [2025-09-24 00:50:35.551] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:50:35.551] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:50:35.615] /dev/mem opened. [2025-09-24 00:50:35.615] Memory mapped at address 0xffff96be4000. [2025-09-24 00:50:35.615] Read at address 0x00600018 (0xffff96be4018): 0x00000000 [2025-09-24 00:50:35.615] Write at address 0x00600018 (0xffff96be4018): 0x00400040, readback 0x00400040 [2025-09-24 00:50:35.631] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:50:35.661] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:50:35.741] Loaded PowerVR consumer services. [2025-09-24 00:50:35.869] Waiting data available... [2025-09-24 00:50:35.901] 512+0 records in [2025-09-24 00:50:35.901] 512+0 records out [2025-09-24 00:50:35.933] Starting syslogd/klogd: done [2025-09-24 00:50:35.965] DML Start [2025-09-24 00:50:36.156] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:50:36.364] DML res1: 0 [2025-09-24 00:50:36.828] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:50:36.828] Read Success [2025-09-24 00:50:36.844] Verifying certificate... [2025-09-24 00:50:37.068] Verified OK [2025-09-24 00:50:37.084] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:50:38.848] Verified OK [2025-09-24 00:50:38.848] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:50:39.396] Verified OK [2025-09-24 00:50:39.396] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:50:41.875] fs.protected_hardlinks = 1 [2025-09-24 00:50:41.875] fs.protected_symlinks = 1 [2025-09-24 00:50:41.891] kernel.modules_disabled = 1 [2025-09-24 00:50:42.083] [2025-09-24 00:50:42.083] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:50:43.403] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:50:51.210] SBL1:1210.0.1.0 [2025-09-24 00:50:51.258] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:50:52.825] SBL2:1210.0.1.0 [2025-09-24 00:50:52.873] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:50:52.986] j-A [2025-09-24 00:51:00.324] The R5 Autosar Classic is running [2025-09-24 00:51:00.349] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:51:00.349] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:51:00.957] INIT: version 2.96 booting [2025-09-24 00:51:01.068] INIT: Entering runlevel: 5 [2025-09-24 00:51:01.228] mtd32 attached [2025-09-24 00:51:01.228] mtd24 attached [2025-09-24 00:51:01.244] mtd28 attached [2025-09-24 00:51:01.292] ubi0:dml_code is mounted. [2025-09-24 00:51:01.292] RTNETLINK answers: File exists [2025-09-24 00:51:01.351] ubi1:textures is mounted. [2025-09-24 00:51:01.351] ubi2:animations is mounted. [2025-09-24 00:51:01.351] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:51:01.351] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:51:01.351] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:51:01.351] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:51:01.351] data.LB_FadeInType0=100 [2025-09-24 00:51:01.351] data.CHLH_FadeInType0=0 [2025-09-24 00:51:01.351] data.WU_FadeInDelay=0 [2025-09-24 00:51:01.351] max_time_out=0 [2025-09-24 00:51:01.351] No splash screen [2025-09-24 00:51:01.351] stop dss Done [2025-09-24 00:51:01.351] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:51:01.436] /dev/mem opened. [2025-09-24 00:51:01.436] Memory mapped at address 0xffffbd913000. [2025-09-24 00:51:01.436] Read at address 0x00600018 (0xffffbd913018): 0x00000000 [2025-09-24 00:51:01.436] Write at address 0x00600018 (0xffffbd913018): 0x00400040, readback 0x00400040 [2025-09-24 00:51:01.436] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:51:01.436] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:51:01.548] Loaded PowerVR consumer services. [2025-09-24 00:51:01.692] Waiting data available... [2025-09-24 00:51:01.708] 512+0 records in [2025-09-24 00:51:01.708] 512+0 records out [2025-09-24 00:51:01.740] Starting syslogd/klogd: done [2025-09-24 00:51:01.772] DML Start [2025-09-24 00:51:01.963] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:51:02.188] DML res1: 0 [2025-09-24 00:51:02.523] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:51:02.544] Read Success [2025-09-24 00:51:02.544] Verifying certificate... [2025-09-24 00:51:02.784] Verified OK [2025-09-24 00:51:02.800] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:51:04.367] Verified OK [2025-09-24 00:51:04.382] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:51:04.955] Verified OK [2025-09-24 00:51:04.955] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:51:07.801] fs.protected_hardlinks = 1 [2025-09-24 00:51:07.801] fs.protected_symlinks = 1 [2025-09-24 00:51:07.817] kernel.modules_disabled = 1 [2025-09-24 00:51:08.008] [2025-09-24 00:51:08.008] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:51:09.188] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:51:17.013] SBL1:1210.0.1.0 [2025-09-24 00:51:17.061] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:51:18.628] SBL2:1210.0.1.0 [2025-09-24 00:51:18.676] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:51:18.772] j-A [2025-09-24 00:51:26.128] The R5 Autosar Classic is running [2025-09-24 00:51:26.150] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:51:26.150] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:51:26.757] INIT: version 2.96 booting [2025-09-24 00:51:26.869] INIT: Entering runlevel: 5 [2025-09-24 00:51:27.028] mtd32 attached [2025-09-24 00:51:27.028] mtd24 attached [2025-09-24 00:51:27.044] mtd28 attached [2025-09-24 00:51:27.152] RTNETLINK answers: File exists [2025-09-24 00:51:27.152] ubi0:dml_code is mounted. [2025-09-24 00:51:27.152] ubi1:textures is mounted. [2025-09-24 00:51:27.152] ubi2:animations is mounted. [2025-09-24 00:51:27.152] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:51:27.152] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:51:27.152] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:51:27.152] data.LB_FadeInType0=100 [2025-09-24 00:51:27.152] data.CHLH_FadeInType0=0 [2025-09-24 00:51:27.152] data.WU_FadeInDelay=0 [2025-09-24 00:51:27.152] max_time_out=0 [2025-09-24 00:51:27.152] No splash screen [2025-09-24 00:51:27.152] stop dss Done [2025-09-24 00:51:27.152] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:51:27.152] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:51:27.225] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:51:27.225] /dev/mem opened. [2025-09-24 00:51:27.225] Memory mapped at address 0xffff9bdde000. [2025-09-24 00:51:27.225] Read at address 0x00600018 (0xffff9bdde018): 0x00000000 [2025-09-24 00:51:27.225] Write at address 0x00600018 (0xffff9bdde018): 0x00400040, readback 0x00400040 [2025-09-24 00:51:27.225] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:51:27.448] Loaded PowerVR consumer services. [2025-09-24 00:51:27.513] Waiting data available... [2025-09-24 00:51:27.529] 512+0 records in [2025-09-24 00:51:27.529] 512+0 records out [2025-09-24 00:51:27.577] Starting syslogd/klogd: done [2025-09-24 00:51:27.593] DML Start [2025-09-24 00:51:27.736] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:51:27.992] DML res1: 0 [2025-09-24 00:51:28.429] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:51:28.429] Read Success [2025-09-24 00:51:28.429] Verifying certificate... [2025-09-24 00:51:28.685] Verified OK [2025-09-24 00:51:28.701] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:51:30.428] Verified OK [2025-09-24 00:51:30.428] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:51:30.939] Verified OK [2025-09-24 00:51:30.955] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:51:33.401] fs.protected_hardlinks = 1 [2025-09-24 00:51:33.417] fs.protected_symlinks = 1 [2025-09-24 00:51:33.417] kernel.modules_disabled = 1 [2025-09-24 00:51:33.609] [2025-09-24 00:51:33.609] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:51:35.012] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:51:42.820] SBL1:1210.0.1.0 [2025-09-24 00:51:42.868] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:51:44.434] SBL2:1210.0.1.0 [2025-09-24 00:51:44.483] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:51:44.595] j-A [2025-09-24 00:51:51.935] The R5 Autosar Classic is running [2025-09-24 00:51:51.960] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:51:51.960] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:51:52.567] INIT: version 2.96 booting [2025-09-24 00:51:52.680] INIT: Entering runlevel: 5 [2025-09-24 00:51:52.823] mtd24 attached [2025-09-24 00:51:52.839] mtd28 attached [2025-09-24 00:51:52.871] ubi0:textures is mounted. [2025-09-24 00:51:52.887] mtd32 attached [2025-09-24 00:51:52.887] ubi1:animations is mounted. [2025-09-24 00:51:52.903] RTNETLINK answers: File exists [2025-09-24 00:51:52.963] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:51:52.963] ubi2:dml_code is mounted. [2025-09-24 00:51:52.963] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:51:52.963] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:51:52.963] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:51:52.963] data.LB_FadeInType0=100 [2025-09-24 00:51:52.963] data.CHLH_FadeInType0=0 [2025-09-24 00:51:52.963] data.WU_FadeInDelay=0 [2025-09-24 00:51:52.963] max_time_out=0 [2025-09-24 00:51:52.963] No splash screen [2025-09-24 00:51:52.963] stop dss Done [2025-09-24 00:51:52.963] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:51:53.042] /dev/mem opened. [2025-09-24 00:51:53.042] Memory mapped at address 0xffff9b32f000. [2025-09-24 00:51:53.042] Read at address 0x00600018 (0xffff9b32f018): 0x00000000 [2025-09-24 00:51:53.042] Write at address 0x00600018 (0xffff9b32f018): 0x00400040, readback 0x00400040 [2025-09-24 00:51:53.042] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:51:53.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:51:53.154] Loaded PowerVR consumer services. [2025-09-24 00:51:53.298] Waiting data available... [2025-09-24 00:51:53.314] 512+0 records in [2025-09-24 00:51:53.314] 512+0 records out [2025-09-24 00:51:53.346] Starting syslogd/klogd: done [2025-09-24 00:51:53.362] DML Start [2025-09-24 00:51:53.538] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:51:53.761] DML res1: 0 [2025-09-24 00:51:54.209] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:51:54.209] Read Success [2025-09-24 00:51:54.225] Verifying certificate... [2025-09-24 00:51:54.465] Verified OK [2025-09-24 00:51:54.496] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:51:56.352] Verified OK [2025-09-24 00:51:56.352] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:51:56.815] Verified OK [2025-09-24 00:51:56.815] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:51:59.277] fs.protected_hardlinks = 1 [2025-09-24 00:51:59.293] fs.protected_symlinks = 1 [2025-09-24 00:51:59.293] kernel.modules_disabled = 1 [2025-09-24 00:51:59.485] [2025-09-24 00:51:59.485] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:52:00.863] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:52:08.641] SBL1:1210.0.1.0 [2025-09-24 00:52:08.673] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:52:10.255] SBL2:1210.0.1.0 [2025-09-24 00:52:10.287] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:52:10.400] j-A [2025-09-24 00:52:17.773] The R5 Autosar Classic is running [2025-09-24 00:52:17.773] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:52:17.773] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:52:18.380] INIT: version 2.96 booting [2025-09-24 00:52:18.493] INIT: Entering runlevel: 5 [2025-09-24 00:52:18.636] mtd24 attached [2025-09-24 00:52:18.652] mtd32 attached [2025-09-24 00:52:18.668] mtd28 attached [2025-09-24 00:52:18.748] RTNETLINK answers: File exists [2025-09-24 00:52:18.748] ubi0:textures is mounted. [2025-09-24 00:52:18.748] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:52:18.748] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:52:18.748] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:52:18.748] ubi2:animations is mounted. [2025-09-24 00:52:18.748] ubi1:dml_code is mounted. [2025-09-24 00:52:18.748] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:52:18.748] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:52:18.764] data.LB_FadeInType0=100 [2025-09-24 00:52:18.764] data.CHLH_FadeInType0=0 [2025-09-24 00:52:18.764] data.WU_FadeInDelay=0 [2025-09-24 00:52:18.785] max_time_out=0 [2025-09-24 00:52:18.785] No splash screen [2025-09-24 00:52:18.785] stop dss Done [2025-09-24 00:52:18.801] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:52:18.801] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:52:18.833] /dev/mem opened. [2025-09-24 00:52:18.833] Memory mapped at address 0xffff80709000. [2025-09-24 00:52:18.858] Read at address 0x00600018 (0xffff80709018): 0x00000000 [2025-09-24 00:52:18.858] Write at address 0x00600018 (0xffff80709018): 0x00400040, readback 0x00400040 [2025-09-24 00:52:18.938] Loaded PowerVR consumer services. [2025-09-24 00:52:19.098] Waiting data available... [2025-09-24 00:52:19.130] 512+0 records in [2025-09-24 00:52:19.130] 512+0 records out [2025-09-24 00:52:19.178] Starting syslogd/klogd: done [2025-09-24 00:52:19.194] DML Start [2025-09-24 00:52:19.370] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:52:19.562] DML res1: 0 [2025-09-24 00:52:20.086] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:52:20.086] Read Success [2025-09-24 00:52:20.086] Verifying certificate... [2025-09-24 00:52:20.342] Verified OK [2025-09-24 00:52:20.358] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:52:22.002] Verified OK [2025-09-24 00:52:22.002] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:52:22.601] Verified OK [2025-09-24 00:52:22.601] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:52:25.079] fs.protected_hardlinks = 1 [2025-09-24 00:52:25.079] fs.protected_symlinks = 1 [2025-09-24 00:52:25.095] kernel.modules_disabled = 1 [2025-09-24 00:52:25.303] [2025-09-24 00:52:25.303] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:52:26.621] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:52:34.429] SBL1:1210.0.1.0 [2025-09-24 00:52:34.461] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:52:36.044] SBL2:1210.0.1.0 [2025-09-24 00:52:36.076] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:52:36.188] j-A [2025-09-24 00:52:43.559] The R5 Autosar Classic is running [2025-09-24 00:52:43.559] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:52:43.559] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:52:44.166] INIT: version 2.96 booting [2025-09-24 00:52:44.263] INIT: Entering runlevel: 5 [2025-09-24 00:52:44.422] mtd24 attached [2025-09-24 00:52:44.438] mtd32 attached [2025-09-24 00:52:44.454] mtd28 attached [2025-09-24 00:52:44.503] ubi0:textures is mounted. [2025-09-24 00:52:44.503] ubi2:animations is mounted. [2025-09-24 00:52:44.503] RTNETLINK answers: File exists [2025-09-24 00:52:44.561] ubi1:dml_code is mounted. [2025-09-24 00:52:44.561] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:52:44.561] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:52:44.561] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:52:44.561] data.LB_FadeInType0=100 [2025-09-24 00:52:44.561] data.CHLH_FadeInType0=0 [2025-09-24 00:52:44.561] data.WU_FadeInDelay=0 [2025-09-24 00:52:44.561] max_time_out=0 [2025-09-24 00:52:44.561] No splash screen [2025-09-24 00:52:44.561] stop dss Done [2025-09-24 00:52:44.561] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:52:44.561] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:52:44.624] /dev/mem opened. [2025-09-24 00:52:44.624] Memory mapped at address 0xffffa4e0b000. [2025-09-24 00:52:44.624] Read at address 0x00600018 (0xffffa4e0b018): 0x00000000 [2025-09-24 00:52:44.624] Write at address 0x00600018 (0xffffa4e0b018): 0x00400040, readback 0x00400040 [2025-09-24 00:52:44.656] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:52:44.672] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:52:44.769] Loaded PowerVR consumer services. [2025-09-24 00:52:44.896] Waiting data available... [2025-09-24 00:52:44.912] 512+0 records in [2025-09-24 00:52:44.912] 512+0 records out [2025-09-24 00:52:44.960] Starting syslogd/klogd: done [2025-09-24 00:52:44.992] DML Start [2025-09-24 00:52:45.152] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:52:45.392] DML res1: 0 [2025-09-24 00:52:45.776] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:52:45.792] Read Success [2025-09-24 00:52:45.792] Verifying certificate... [2025-09-24 00:52:46.047] Verified OK [2025-09-24 00:52:46.047] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:52:47.796] Verified OK [2025-09-24 00:52:47.796] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:52:48.425] Verified OK [2025-09-24 00:52:48.425] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:52:50.968] fs.protected_hardlinks = 1 [2025-09-24 00:52:50.968] fs.protected_symlinks = 1 [2025-09-24 00:52:50.984] kernel.modules_disabled = 1 [2025-09-24 00:52:51.175] [2025-09-24 00:52:51.175] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:52:52.411] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:53:00.212] SBL1:1210.0.1.0 [2025-09-24 00:53:00.260] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:53:01.827] SBL2:1210.0.1.0 [2025-09-24 00:53:01.875] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:53:01.971] j-A [2025-09-24 00:53:09.324] The R5 Autosar Classic is running [2025-09-24 00:53:09.346] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:53:09.346] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:53:09.954] INIT: version 2.96 booting [2025-09-24 00:53:10.066] INIT: Entering runlevel: 5 [2025-09-24 00:53:10.226] mtd28 attached [2025-09-24 00:53:10.226] mtd24 attached [2025-09-24 00:53:10.242] mtd32 attached [2025-09-24 00:53:10.290] RTNETLINK answers: File exists [2025-09-24 00:53:10.290] ubi0:animations is mounted. [2025-09-24 00:53:10.327] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:53:10.327] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:53:10.327] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:53:10.327] ubi1:textures is mounted. [2025-09-24 00:53:10.327] ubi2:dml_code is mounted. [2025-09-24 00:53:10.327] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:53:10.327] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:53:10.354] data.LB_FadeInType0=100 [2025-09-24 00:53:10.354] data.CHLH_FadeInType0=0 [2025-09-24 00:53:10.354] data.WU_FadeInDelay=0 [2025-09-24 00:53:10.354] max_time_out=0 [2025-09-24 00:53:10.354] No splash screen [2025-09-24 00:53:10.354] stop dss Done [2025-09-24 00:53:10.369] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:53:10.422] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:53:10.422] /dev/mem opened. [2025-09-24 00:53:10.422] Memory mapped at address 0xffffa0aec000. [2025-09-24 00:53:10.422] Read at address 0x00600018 (0xffffa0aec018): 0x00000000 [2025-09-24 00:53:10.422] Write at address 0x00600018 (0xffffa0aec018): 0x00400040, readback 0x00400040 [2025-09-24 00:53:10.646] Loaded PowerVR consumer services. [2025-09-24 00:53:10.694] Waiting data available... [2025-09-24 00:53:10.710] 512+0 records in [2025-09-24 00:53:10.710] 512+0 records out [2025-09-24 00:53:10.758] Starting syslogd/klogd: done [2025-09-24 00:53:10.774] DML Start [2025-09-24 00:53:10.965] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:53:11.142] DML res1: 0 [2025-09-24 00:53:11.712] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:53:11.712] Read Success [2025-09-24 00:53:11.712] Verifying certificate... [2025-09-24 00:53:12.000] Verified OK [2025-09-24 00:53:12.032] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:53:13.723] Verified OK [2025-09-24 00:53:13.723] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:53:14.257] Verified OK [2025-09-24 00:53:14.257] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:53:16.703] fs.protected_hardlinks = 1 [2025-09-24 00:53:16.719] fs.protected_symlinks = 1 [2025-09-24 00:53:16.719] kernel.modules_disabled = 1 [2025-09-24 00:53:16.911] [2025-09-24 00:53:16.911] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:53:18.204] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:53:26.008] SBL1:1210.0.1.0 [2025-09-24 00:53:26.039] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:53:27.623] SBL2:1210.0.1.0 [2025-09-24 00:53:27.655] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:53:27.766] j-A [2025-09-24 00:53:35.120] The R5 Autosar Classic is running [2025-09-24 00:53:35.120] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:53:35.141] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:53:35.749] INIT: version 2.96 booting [2025-09-24 00:53:35.860] INIT: Entering runlevel: 5 [2025-09-24 00:53:36.004] mtd24 attached [2025-09-24 00:53:36.020] mtd28 attached [2025-09-24 00:53:36.036] mtd32 attached [2025-09-24 00:53:36.084] ubi0:textures is mounted. [2025-09-24 00:53:36.084] RTNETLINK answers: File exists [2025-09-24 00:53:36.113] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:53:36.113] ubi2:dml_code is mounted. [2025-09-24 00:53:36.113] ubi1:animations is mounted. [2025-09-24 00:53:36.113] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:53:36.113] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:53:36.146] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:53:36.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:53:36.146] data.LB_FadeInType0=100 [2025-09-24 00:53:36.146] data.CHLH_FadeInType0=0 [2025-09-24 00:53:36.146] data.WU_FadeInDelay=0 [2025-09-24 00:53:36.146] max_time_out=0 [2025-09-24 00:53:36.146] No splash screen [2025-09-24 00:53:36.146] stop dss Done [2025-09-24 00:53:36.178] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:53:36.219] /dev/mem opened. [2025-09-24 00:53:36.219] Memory mapped at address 0xffffa3549000. [2025-09-24 00:53:36.219] Read at address 0x00600018 (0xffffa3549018): 0x00000000 [2025-09-24 00:53:36.219] Write at address 0x00600018 (0xffffa3549018): 0x00400040, readback 0x00400040 [2025-09-24 00:53:36.219] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:53:36.299] Loaded PowerVR consumer services. [2025-09-24 00:53:36.475] Waiting data available... [2025-09-24 00:53:36.491] 512+0 records in [2025-09-24 00:53:36.491] 512+0 records out [2025-09-24 00:53:36.507] Starting syslogd/klogd: done [2025-09-24 00:53:36.523] DML Start [2025-09-24 00:53:36.714] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:53:36.923] DML res1: 0 [2025-09-24 00:53:37.386] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:53:37.402] Read Success [2025-09-24 00:53:37.402] Verifying certificate... [2025-09-24 00:53:37.658] Verified OK [2025-09-24 00:53:37.674] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:53:39.354] Verified OK [2025-09-24 00:53:39.354] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:53:40.051] Verified OK [2025-09-24 00:53:40.051] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:53:42.578] fs.protected_hardlinks = 1 [2025-09-24 00:53:42.578] fs.protected_symlinks = 1 [2025-09-24 00:53:42.594] kernel.modules_disabled = 1 [2025-09-24 00:53:42.770] [2025-09-24 00:53:42.770] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:53:43.963] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:53:51.835] SBL1:1210.0.1.0 [2025-09-24 00:53:51.867] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:53:53.450] SBL2:1210.0.1.0 [2025-09-24 00:53:53.482] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:53:53.593] j-A [2025-09-24 00:54:00.968] The R5 Autosar Classic is running [2025-09-24 00:54:00.968] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:54:00.968] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:54:01.576] INIT: version 2.96 booting [2025-09-24 00:54:01.688] INIT: Entering runlevel: 5 [2025-09-24 00:54:01.831] mtd28 attached [2025-09-24 00:54:01.847] mtd24 attached [2025-09-24 00:54:01.879] ubi0:animations is mounted. [2025-09-24 00:54:01.895] ubi1:textures is mounted. [2025-09-24 00:54:01.911] mtd32 attached [2025-09-24 00:54:01.911] RTNETLINK answers: File exists [2025-09-24 00:54:01.956] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:54:01.956] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:54:01.956] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:54:01.956] ubi2:dml_code is mounted. [2025-09-24 00:54:01.956] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:54:01.956] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:54:01.956] data.LB_FadeInType0=100 [2025-09-24 00:54:01.976] data.CHLH_FadeInType0=0 [2025-09-24 00:54:01.976] data.WU_FadeInDelay=0 [2025-09-24 00:54:01.976] max_time_out=0 [2025-09-24 00:54:01.976] No splash screen [2025-09-24 00:54:01.976] stop dss Done [2025-09-24 00:54:02.008] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:54:02.024] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:54:02.060] /dev/mem opened. [2025-09-24 00:54:02.060] Memory mapped at address 0xffff9d512000. [2025-09-24 00:54:02.060] Read at address 0x00600018 (0xffff9d512018): 0x00000000 [2025-09-24 00:54:02.060] Write at address 0x00600018 (0xffff9d512018): 0x00400040, readback 0x00400040 [2025-09-24 00:54:02.204] Loaded PowerVR consumer services. [2025-09-24 00:54:02.316] Waiting data available... [2025-09-24 00:54:02.332] 512+0 records in [2025-09-24 00:54:02.332] 512+0 records out [2025-09-24 00:54:02.380] Starting syslogd/klogd: done [2025-09-24 00:54:02.396] DML Start [2025-09-24 00:54:02.588] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:54:02.796] DML res1: 0 [2025-09-24 00:54:03.227] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:54:03.227] Read Success [2025-09-24 00:54:03.227] Verifying certificate... [2025-09-24 00:54:03.450] Verified OK [2025-09-24 00:54:03.450] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:54:05.129] Verified OK [2025-09-24 00:54:05.129] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:54:05.811] Verified OK [2025-09-24 00:54:05.811] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:54:08.509] fs.protected_hardlinks = 1 [2025-09-24 00:54:08.509] fs.protected_symlinks = 1 [2025-09-24 00:54:08.509] kernel.modules_disabled = 1 [2025-09-24 00:54:08.701] [2025-09-24 00:54:08.701] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:54:09.864] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:54:17.612] SBL1:1210.0.1.0 [2025-09-24 00:54:17.660] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:54:19.227] SBL2:1210.0.1.0 [2025-09-24 00:54:19.275] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:54:19.371] j-A [2025-09-24 00:54:26.724] The R5 Autosar Classic is running [2025-09-24 00:54:26.746] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:54:26.746] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:54:27.354] INIT: version 2.96 booting [2025-09-24 00:54:27.466] INIT: Entering runlevel: 5 [2025-09-24 00:54:27.610] mtd24 attached [2025-09-24 00:54:27.626] mtd32 attached [2025-09-24 00:54:27.626] mtd28 attached [2025-09-24 00:54:27.674] ubi0:textures is mounted. [2025-09-24 00:54:27.746] RTNETLINK answers: File exists [2025-09-24 00:54:27.746] ubi2:animations is mounted. [2025-09-24 00:54:27.746] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:54:27.746] ubi1:dml_code is mounted. [2025-09-24 00:54:27.746] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:54:27.746] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:54:27.746] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:54:27.746] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:54:27.746] data.LB_FadeInType0=100 [2025-09-24 00:54:27.746] data.CHLH_FadeInType0=0 [2025-09-24 00:54:27.746] data.WU_FadeInDelay=0 [2025-09-24 00:54:27.746] max_time_out=0 [2025-09-24 00:54:27.746] No splash screen [2025-09-24 00:54:27.746] stop dss Done [2025-09-24 00:54:27.810] /dev/mem opened. [2025-09-24 00:54:27.810] Memory mapped at address 0xffff8ac61000. [2025-09-24 00:54:27.810] Read at address 0x00600018 (0xffff8ac61018): 0x00000000 [2025-09-24 00:54:27.810] Write at address 0x00600018 (0xffff8ac61018): 0x00400040, readback 0x00400040 [2025-09-24 00:54:27.826] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:54:27.859] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:54:27.955] Loaded PowerVR consumer services. [2025-09-24 00:54:28.098] Waiting data available... [2025-09-24 00:54:28.114] 512+0 records in [2025-09-24 00:54:28.114] 512+0 records out [2025-09-24 00:54:28.146] Starting syslogd/klogd: done [2025-09-24 00:54:28.162] DML Start [2025-09-24 00:54:28.402] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:54:28.610] DML res1: 0 [2025-09-24 00:54:28.961] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:54:28.982] Read Success [2025-09-24 00:54:28.982] Verifying certificate... [2025-09-24 00:54:29.238] Verified OK [2025-09-24 00:54:29.254] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:54:30.988] Verified OK [2025-09-24 00:54:30.988] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:54:31.551] Verified OK [2025-09-24 00:54:31.551] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:54:34.125] fs.protected_hardlinks = 1 [2025-09-24 00:54:34.155] fs.protected_symlinks = 1 [2025-09-24 00:54:34.155] kernel.modules_disabled = 1 [2025-09-24 00:54:34.347] [2025-09-24 00:54:34.347] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:54:35.652] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:54:43.436] SBL1:1210.0.1.0 [2025-09-24 00:54:43.467] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:54:45.050] SBL2:1210.0.1.0 [2025-09-24 00:54:45.083] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:54:45.194] j-A [2025-09-24 00:54:52.548] The R5 Autosar Classic is running [2025-09-24 00:54:52.548] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:54:52.569] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:54:53.177] INIT: version 2.96 booting [2025-09-24 00:54:53.288] INIT: Entering runlevel: 5 [2025-09-24 00:54:53.432] mtd24 attached [2025-09-24 00:54:53.448] mtd28 attached [2025-09-24 00:54:53.464] mtd32 attached [2025-09-24 00:54:53.497] ubi0:textures is mounted. [2025-09-24 00:54:53.513] ubi1:animations is mounted. [2025-09-24 00:54:53.513] RTNETLINK answers: File exists [2025-09-24 00:54:53.548] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:54:53.548] ubi2:dml_code is mounted. [2025-09-24 00:54:53.548] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:54:53.548] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:54:53.548] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:54:53.548] data.LB_FadeInType0=100 [2025-09-24 00:54:53.574] data.CHLH_FadeInType0=0 [2025-09-24 00:54:53.574] data.WU_FadeInDelay=0 [2025-09-24 00:54:53.574] max_time_out=0 [2025-09-24 00:54:53.574] No splash screen [2025-09-24 00:54:53.574] stop dss Done [2025-09-24 00:54:53.574] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:54:53.644] /dev/mem opened. [2025-09-24 00:54:53.644] Memory mapped at address 0xffff92a73000. [2025-09-24 00:54:53.644] Read at address 0x00600018 (0xffff92a73018): 0x00000000 [2025-09-24 00:54:53.644] Write at address 0x00600018 (0xffff92a73018): 0x00400040, readback 0x00400040 [2025-09-24 00:54:53.676] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:54:53.692] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:54:53.788] Loaded PowerVR consumer services. [2025-09-24 00:54:53.916] Waiting data available... [2025-09-24 00:54:53.932] 512+0 records in [2025-09-24 00:54:53.932] 512+0 records out [2025-09-24 00:54:53.948] Starting syslogd/klogd: done [2025-09-24 00:54:53.980] DML Start [2025-09-24 00:54:54.140] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:54:54.347] DML res1: 0 [2025-09-24 00:54:54.811] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:54:54.832] Read Success [2025-09-24 00:54:54.832] Verifying certificate... [2025-09-24 00:54:55.072] Verified OK [2025-09-24 00:54:55.088] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:54:56.629] Verified OK [2025-09-24 00:54:56.629] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:54:57.301] Verified OK [2025-09-24 00:54:57.301] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:54:59.955] fs.protected_hardlinks = 1 [2025-09-24 00:54:59.971] fs.protected_symlinks = 1 [2025-09-24 00:54:59.971] kernel.modules_disabled = 1 [2025-09-24 00:55:00.179] [2025-09-24 00:55:00.179] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:55:01.408] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:55:09.871] SBL1:1210.0.1.0 [2025-09-24 00:55:09.919] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:55:11.486] SBL2:1210.0.1.0 [2025-09-24 00:55:11.534] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:55:11.630] j-A [2025-09-24 00:55:18.984] The R5 Autosar Classic is running [2025-09-24 00:55:19.005] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:55:19.005] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:55:19.613] INIT: version 2.96 booting [2025-09-24 00:55:19.724] INIT: Entering runlevel: 5 [2025-09-24 00:55:19.885] mtd24 attached [2025-09-24 00:55:19.885] mtd28 attached [2025-09-24 00:55:19.901] mtd32 attached [2025-09-24 00:55:19.948] RTNETLINK answers: File exists [2025-09-24 00:55:20.011] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:55:20.011] ubi0:textures is mounted. [2025-09-24 00:55:20.011] ubi2:dml_code is mounted. [2025-09-24 00:55:20.011] ubi1:animations is mounted. [2025-09-24 00:55:20.011] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:55:20.011] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:55:20.011] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:55:20.011] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:55:20.011] data.LB_FadeInType0=100 [2025-09-24 00:55:20.011] data.CHLH_FadeInType0=0 [2025-09-24 00:55:20.011] data.WU_FadeInDelay=0 [2025-09-24 00:55:20.011] max_time_out=0 [2025-09-24 00:55:20.011] No splash screen [2025-09-24 00:55:20.011] stop dss Done [2025-09-24 00:55:20.043] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:55:20.081] /dev/mem opened. [2025-09-24 00:55:20.081] Memory mapped at address 0xffffafd2a000. [2025-09-24 00:55:20.081] Read at address 0x00600018 (0xffffafd2a018): 0x00000000 [2025-09-24 00:55:20.081] Write at address 0x00600018 (0xffffafd2a018): 0x00400040, readback 0x00400040 [2025-09-24 00:55:20.081] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:55:20.161] Loaded PowerVR consumer services. [2025-09-24 00:55:20.337] Waiting data available... [2025-09-24 00:55:20.369] 512+0 records in [2025-09-24 00:55:20.369] 512+0 records out [2025-09-24 00:55:20.401] Starting syslogd/klogd: done [2025-09-24 00:55:20.417] DML Start [2025-09-24 00:55:20.593] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:55:20.832] DML res1: 0 [2025-09-24 00:55:21.248] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:55:21.264] Read Success [2025-09-24 00:55:21.264] Verifying certificate... [2025-09-24 00:55:21.536] Verified OK [2025-09-24 00:55:21.552] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:55:23.050] Verified OK [2025-09-24 00:55:23.050] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:55:23.705] Verified OK [2025-09-24 00:55:23.705] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:55:26.422] fs.protected_hardlinks = 1 [2025-09-24 00:55:26.422] fs.protected_symlinks = 1 [2025-09-24 00:55:26.422] kernel.modules_disabled = 1 [2025-09-24 00:55:26.597] [2025-09-24 00:55:26.597] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:55:27.871] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:55:35.715] SBL1:1210.0.1.0 [2025-09-24 00:55:35.747] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:55:37.330] SBL2:1210.0.1.0 [2025-09-24 00:55:37.361] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:55:37.474] j-A [2025-09-24 00:55:44.850] The R5 Autosar Classic is running [2025-09-24 00:55:44.850] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:55:44.850] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:55:45.458] INIT: version 2.96 booting [2025-09-24 00:55:45.570] INIT: Entering runlevel: 5 [2025-09-24 00:55:45.714] mtd24 attached [2025-09-24 00:55:45.730] mtd28 attached [2025-09-24 00:55:45.730] mtd32 attached [2025-09-24 00:55:45.778] ubi0:textures is mounted. [2025-09-24 00:55:45.793] RTNETLINK answers: File exists [2025-09-24 00:55:45.794] ubi2:dml_code is mounted. [2025-09-24 00:55:45.849] ubi1:animations is mounted. [2025-09-24 00:55:45.849] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:55:45.849] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:55:45.849] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:55:45.849] data.LB_FadeInType0=100 [2025-09-24 00:55:45.849] data.CHLH_FadeInType0=0 [2025-09-24 00:55:45.849] data.WU_FadeInDelay=0 [2025-09-24 00:55:45.849] max_time_out=0 [2025-09-24 00:55:45.849] No splash screen [2025-09-24 00:55:45.849] stop dss Done [2025-09-24 00:55:45.849] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:55:45.849] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:55:45.882] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:55:45.917] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:55:45.917] /dev/mem opened. [2025-09-24 00:55:45.917] Memory mapped at address 0xffffa1cc2000. [2025-09-24 00:55:45.917] Read at address 0x00600018 (0xffffa1cc2018): 0x00000000 [2025-09-24 00:55:45.917] Write at address 0x00600018 (0xffffa1cc2018): 0x00400040, readback 0x00400040 [2025-09-24 00:55:46.012] Loaded PowerVR consumer services. [2025-09-24 00:55:46.172] Waiting data available... [2025-09-24 00:55:46.204] 512+0 records in [2025-09-24 00:55:46.204] 512+0 records out [2025-09-24 00:55:46.237] Starting syslogd/klogd: done [2025-09-24 00:55:46.269] DML Start [2025-09-24 00:55:46.428] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:55:46.668] DML res1: 0 [2025-09-24 00:55:47.116] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:55:47.116] Read Success [2025-09-24 00:55:47.131] Verifying certificate... [2025-09-24 00:55:47.356] Verified OK [2025-09-24 00:55:47.371] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:55:49.040] Verified OK [2025-09-24 00:55:49.040] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:55:49.614] Verified OK [2025-09-24 00:55:49.614] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:55:52.124] fs.protected_hardlinks = 1 [2025-09-24 00:55:52.140] fs.protected_symlinks = 1 [2025-09-24 00:55:52.140] kernel.modules_disabled = 1 [2025-09-24 00:55:52.348] [2025-09-24 00:55:52.348] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:55:53.681] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:56:01.538] SBL1:1210.0.1.0 [2025-09-24 00:56:01.570] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:56:03.152] SBL2:1210.0.1.0 [2025-09-24 00:56:03.184] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:56:03.297] j-A [2025-09-24 00:56:10.671] The R5 Autosar Classic is running [2025-09-24 00:56:10.671] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:56:10.671] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:56:11.279] INIT: version 2.96 booting [2025-09-24 00:56:11.390] INIT: Entering runlevel: 5 [2025-09-24 00:56:11.550] mtd32 attached [2025-09-24 00:56:11.550] mtd24 attached [2025-09-24 00:56:11.566] mtd28 attached [2025-09-24 00:56:11.598] ubi0:dml_code is mounted. [2025-09-24 00:56:11.684] RTNETLINK answers: File exists [2025-09-24 00:56:11.684] ubi2:animations is mounted. [2025-09-24 00:56:11.684] ubi1:textures is mounted. [2025-09-24 00:56:11.684] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:56:11.684] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:56:11.684] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:56:11.684] data.LB_FadeInType0=100 [2025-09-24 00:56:11.684] data.CHLH_FadeInType0=0 [2025-09-24 00:56:11.684] data.WU_FadeInDelay=0 [2025-09-24 00:56:11.684] max_time_out=0 [2025-09-24 00:56:11.684] No splash screen [2025-09-24 00:56:11.684] stop dss Done [2025-09-24 00:56:11.684] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:56:11.684] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:56:11.716] /dev/mem opened. [2025-09-24 00:56:11.716] Memory mapped at address 0xffff9867c000. [2025-09-24 00:56:11.743] Read at address 0x00600018 (0xffff9867c018): 0x00000000 [2025-09-24 00:56:11.743] Write at address 0x00600018 (0xffff9867c018): 0x00400040, readback 0x00400040 [2025-09-24 00:56:11.790] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:56:11.812] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:56:11.876] Loaded PowerVR consumer services. [2025-09-24 00:56:12.020] Waiting data available... [2025-09-24 00:56:12.020] 512+0 records in [2025-09-24 00:56:12.020] 512+0 records out [2025-09-24 00:56:12.068] Starting syslogd/klogd: done [2025-09-24 00:56:12.084] DML Start [2025-09-24 00:56:12.291] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:56:12.499] DML res1: 0 [2025-09-24 00:56:12.889] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:56:12.889] Read Success [2025-09-24 00:56:12.889] Verifying certificate... [2025-09-24 00:56:13.145] Verified OK [2025-09-24 00:56:13.161] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:56:14.814] Verified OK [2025-09-24 00:56:14.814] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:56:15.450] Verified OK [2025-09-24 00:56:15.450] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:56:18.072] fs.protected_hardlinks = 1 [2025-09-24 00:56:18.087] fs.protected_symlinks = 1 [2025-09-24 00:56:18.087] kernel.modules_disabled = 1 [2025-09-24 00:56:18.295] [2025-09-24 00:56:18.295] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:56:19.599] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:56:27.343] SBL1:1210.0.1.0 [2025-09-24 00:56:27.375] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:56:28.958] SBL2:1210.0.1.0 [2025-09-24 00:56:28.990] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:56:29.102] j-A [2025-09-24 00:56:36.477] The R5 Autosar Classic is running [2025-09-24 00:56:36.477] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:56:36.477] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:56:37.085] INIT: version 2.96 booting [2025-09-24 00:56:37.197] INIT: Entering runlevel: 5 [2025-09-24 00:56:37.341] mtd24 attached [2025-09-24 00:56:37.357] mtd28 attached [2025-09-24 00:56:37.373] mtd32 attached [2025-09-24 00:56:37.473] RTNETLINK answers: File exists [2025-09-24 00:56:37.473] ubi1:animations is mounted. [2025-09-24 00:56:37.473] ubi0:textures is mounted. [2025-09-24 00:56:37.473] ubi2:dml_code is mounted. [2025-09-24 00:56:37.473] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:56:37.473] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:56:37.473] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:56:37.473] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:56:37.473] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:56:37.473] data.LB_FadeInType0=100 [2025-09-24 00:56:37.473] data.CHLH_FadeInType0=0 [2025-09-24 00:56:37.473] data.WU_FadeInDelay=0 [2025-09-24 00:56:37.473] max_time_out=0 [2025-09-24 00:56:37.473] No splash screen [2025-09-24 00:56:37.473] stop dss Done [2025-09-24 00:56:37.540] /dev/mem opened. [2025-09-24 00:56:37.540] Memory mapped at address 0xffff861ff000. [2025-09-24 00:56:37.540] Read at address 0x00600018 (0xffff861ff018): 0x00000000 [2025-09-24 00:56:37.540] Write at address 0x00600018 (0xffff861ff018): 0x00400040, readback 0x00400040 [2025-09-24 00:56:37.572] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:56:37.588] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:56:37.668] Loaded PowerVR consumer services. [2025-09-24 00:56:37.811] Waiting data available... [2025-09-24 00:56:37.827] 512+0 records in [2025-09-24 00:56:37.827] 512+0 records out [2025-09-24 00:56:37.875] Starting syslogd/klogd: done [2025-09-24 00:56:37.892] DML Start [2025-09-24 00:56:38.067] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:56:38.275] DML res1: 0 [2025-09-24 00:56:38.751] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:56:38.751] Read Success [2025-09-24 00:56:38.751] Verifying certificate... [2025-09-24 00:56:38.991] Verified OK [2025-09-24 00:56:39.007] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:56:40.526] Verified OK [2025-09-24 00:56:40.526] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:56:41.172] Verified OK [2025-09-24 00:56:41.172] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:56:43.954] fs.protected_hardlinks = 1 [2025-09-24 00:56:43.970] fs.protected_symlinks = 1 [2025-09-24 00:56:43.970] kernel.modules_disabled = 1 [2025-09-24 00:56:44.162] [2025-09-24 00:56:44.162] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:56:45.310] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:56:53.133] SBL1:1210.0.1.0 [2025-09-24 00:56:53.165] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:56:54.748] SBL2:1210.0.1.0 [2025-09-24 00:56:54.780] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:56:54.892] j-A [2025-09-24 00:57:02.266] The R5 Autosar Classic is running [2025-09-24 00:57:02.266] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:57:02.266] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:57:02.874] INIT: version 2.96 booting [2025-09-24 00:57:02.986] INIT: Entering runlevel: 5 [2025-09-24 00:57:03.130] mtd28 attached [2025-09-24 00:57:03.146] mtd24 attached [2025-09-24 00:57:03.162] mtd32 attached [2025-09-24 00:57:03.193] RTNETLINK answers: File exists [2025-09-24 00:57:03.237] ubi0:animations is mounted. [2025-09-24 00:57:03.237] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:57:03.237] ubi1:textures is mounted. [2025-09-24 00:57:03.237] ubi2:dml_code is mounted. [2025-09-24 00:57:03.237] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:57:03.237] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:57:03.237] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:57:03.266] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:57:03.266] data.LB_FadeInType0=100 [2025-09-24 00:57:03.266] data.CHLH_FadeInType0=0 [2025-09-24 00:57:03.266] data.WU_FadeInDelay=0 [2025-09-24 00:57:03.266] max_time_out=0 [2025-09-24 00:57:03.266] No splash screen [2025-09-24 00:57:03.266] stop dss Done [2025-09-24 00:57:03.314] /dev/mem opened. [2025-09-24 00:57:03.314] Memory mapped at address 0xffff96fb3000. [2025-09-24 00:57:03.354] Read at address 0x00600018 (0xffff96fb3018): 0x00000000 [2025-09-24 00:57:03.354] Write at address 0x00600018 (0xffff96fb3018): 0x00400040, readback 0x00400040 [2025-09-24 00:57:03.354] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:57:03.354] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:57:03.466] Loaded PowerVR consumer services. [2025-09-24 00:57:03.593] Waiting data available... [2025-09-24 00:57:03.609] 512+0 records in [2025-09-24 00:57:03.609] 512+0 records out [2025-09-24 00:57:03.641] Starting syslogd/klogd: done [2025-09-24 00:57:03.657] DML Start [2025-09-24 00:57:03.833] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:57:04.041] DML res1: 0 [2025-09-24 00:57:04.537] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:57:04.558] Read Success [2025-09-24 00:57:04.558] Verifying certificate... [2025-09-24 00:57:04.797] Verified OK [2025-09-24 00:57:04.813] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:57:06.405] Verified OK [2025-09-24 00:57:06.405] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:57:07.088] Verified OK [2025-09-24 00:57:07.088] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:57:09.727] fs.protected_hardlinks = 1 [2025-09-24 00:57:09.743] fs.protected_symlinks = 1 [2025-09-24 00:57:09.743] kernel.modules_disabled = 1 [2025-09-24 00:57:09.934] [2025-09-24 00:57:09.934] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:57:11.081] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:57:18.939] SBL1:1210.0.1.0 [2025-09-24 00:57:18.987] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:57:20.554] SBL2:1210.0.1.0 [2025-09-24 00:57:20.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:57:20.697] j-A [2025-09-24 00:57:28.052] The R5 Autosar Classic is running [2025-09-24 00:57:28.077] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:57:28.077] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:57:28.685] INIT: version 2.96 booting [2025-09-24 00:57:28.797] INIT: Entering runlevel: 5 [2025-09-24 00:57:28.941] mtd28 attached [2025-09-24 00:57:28.956] mtd32 attached [2025-09-24 00:57:28.972] mtd24 attached [2025-09-24 00:57:29.004] RTNETLINK answers: File exists [2025-09-24 00:57:29.053] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:57:29.053] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:57:29.053] ubi0:animations is mounted. [2025-09-24 00:57:29.053] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:57:29.053] ubi1:dml_code is mounted. [2025-09-24 00:57:29.053] ubi2:textures is mounted. [2025-09-24 00:57:29.053] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:57:29.053] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:57:29.083] data.LB_FadeInType0=100 [2025-09-24 00:57:29.083] data.CHLH_FadeInType0=0 [2025-09-24 00:57:29.083] data.WU_FadeInDelay=0 [2025-09-24 00:57:29.083] max_time_out=0 [2025-09-24 00:57:29.083] No splash screen [2025-09-24 00:57:29.083] stop dss Done [2025-09-24 00:57:29.115] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:57:29.131] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:57:29.168] /dev/mem opened. [2025-09-24 00:57:29.168] Memory mapped at address 0xffff9448c000. [2025-09-24 00:57:29.168] Read at address 0x00600018 (0xffff9448c018): 0x00000000 [2025-09-24 00:57:29.168] Write at address 0x00600018 (0xffff9448c018): 0x00400040, readback 0x00400040 [2025-09-24 00:57:29.408] Loaded PowerVR consumer services. [2025-09-24 00:57:29.424] Waiting data available... [2025-09-24 00:57:29.439] 512+0 records in [2025-09-24 00:57:29.455] 512+0 records out [2025-09-24 00:57:29.471] Starting syslogd/klogd: done [2025-09-24 00:57:29.487] DML Start [2025-09-24 00:57:29.647] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:57:29.903] DML res1: 0 [2025-09-24 00:57:30.378] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:57:30.378] Read Success [2025-09-24 00:57:30.378] Verifying certificate... [2025-09-24 00:57:30.618] Verified OK [2025-09-24 00:57:30.634] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:57:32.278] Verified OK [2025-09-24 00:57:32.278] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:57:32.886] Verified OK [2025-09-24 00:57:32.902] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:57:35.556] fs.protected_hardlinks = 1 [2025-09-24 00:57:35.571] fs.protected_symlinks = 1 [2025-09-24 00:57:35.571] kernel.modules_disabled = 1 [2025-09-24 00:57:35.780] [2025-09-24 00:57:35.780] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:57:36.908] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:57:44.744] SBL1:1210.0.1.0 [2025-09-24 00:57:44.792] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:57:46.359] SBL2:1210.0.1.0 [2025-09-24 00:57:46.407] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:57:46.503] j-A [2025-09-24 00:57:53.856] The R5 Autosar Classic is running [2025-09-24 00:57:53.880] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:57:53.880] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:57:54.488] INIT: version 2.96 booting [2025-09-24 00:57:54.600] INIT: Entering runlevel: 5 [2025-09-24 00:57:54.759] mtd24 attached [2025-09-24 00:57:54.759] mtd28 attached [2025-09-24 00:57:54.775] mtd32 attached [2025-09-24 00:57:54.808] ubi0:textures is mounted. [2025-09-24 00:57:54.824] RTNETLINK answers: File exists [2025-09-24 00:57:54.858] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:57:54.858] ubi2:dml_code is mounted. [2025-09-24 00:57:54.858] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:57:54.858] ubi1:animations is mounted. [2025-09-24 00:57:54.858] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:57:54.858] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:57:54.858] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:57:54.885] data.LB_FadeInType0=100 [2025-09-24 00:57:54.885] data.CHLH_FadeInType0=0 [2025-09-24 00:57:54.885] data.WU_FadeInDelay=0 [2025-09-24 00:57:54.885] max_time_out=0 [2025-09-24 00:57:54.885] No splash screen [2025-09-24 00:57:54.885] stop dss Done [2025-09-24 00:57:54.901] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:57:54.917] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:57:54.957] /dev/mem opened. [2025-09-24 00:57:54.957] Memory mapped at address 0xffff83543000. [2025-09-24 00:57:54.957] Read at address 0x00600018 (0xffff83543018): 0x00000000 [2025-09-24 00:57:54.957] Write at address 0x00600018 (0xffff83543018): 0x00400040, readback 0x00400040 [2025-09-24 00:57:55.053] Loaded PowerVR consumer services. [2025-09-24 00:57:55.213] Waiting data available... [2025-09-24 00:57:55.245] 512+0 records in [2025-09-24 00:57:55.245] 512+0 records out [2025-09-24 00:57:55.277] Starting syslogd/klogd: done [2025-09-24 00:57:55.309] DML Start [2025-09-24 00:57:55.453] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:57:55.678] DML res1: 0 [2025-09-24 00:57:56.149] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:57:56.149] Read Success [2025-09-24 00:57:56.149] Verifying certificate... [2025-09-24 00:57:56.373] Verified OK [2025-09-24 00:57:56.389] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:57:58.148] Verified OK [2025-09-24 00:57:58.148] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:57:58.596] Verified OK [2025-09-24 00:57:58.596] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:58:01.027] fs.protected_hardlinks = 1 [2025-09-24 00:58:01.027] fs.protected_symlinks = 1 [2025-09-24 00:58:01.042] kernel.modules_disabled = 1 [2025-09-24 00:58:01.218] [2025-09-24 00:58:01.219] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:58:02.748] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:58:10.544] SBL1:1210.0.1.0 [2025-09-24 00:58:10.592] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:58:12.158] SBL2:1210.0.1.0 [2025-09-24 00:58:12.206] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:58:12.319] j-A [2025-09-24 00:58:19.689] The R5 Autosar Classic is running [2025-09-24 00:58:19.689] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:58:19.689] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:58:20.296] INIT: version 2.96 booting [2025-09-24 00:58:20.408] INIT: Entering runlevel: 5 [2025-09-24 00:58:20.551] mtd24 attached [2025-09-24 00:58:20.568] mtd28 attached [2025-09-24 00:58:20.584] mtd32 attached [2025-09-24 00:58:20.600] ubi0:textures is mounted. [2025-09-24 00:58:20.632] RTNETLINK answers: File exists [2025-09-24 00:58:20.632] ubi1:animations is mounted. [2025-09-24 00:58:20.689] ubi2:dml_code is mounted. [2025-09-24 00:58:20.689] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:58:20.689] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:58:20.689] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:58:20.689] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:58:20.689] data.LB_FadeInType0=100 [2025-09-24 00:58:20.689] data.CHLH_FadeInType0=0 [2025-09-24 00:58:20.689] data.WU_FadeInDelay=0 [2025-09-24 00:58:20.689] max_time_out=0 [2025-09-24 00:58:20.689] No splash screen [2025-09-24 00:58:20.689] stop dss Done [2025-09-24 00:58:20.689] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:58:20.721] /dev/mem opened. [2025-09-24 00:58:20.721] Memory mapped at address 0xffff7f80b000. [2025-09-24 00:58:20.747] Read at address 0x00600018 (0xffff7f80b018): 0x00000000 [2025-09-24 00:58:20.747] Write at address 0x00600018 (0xffff7f80b018): 0x00400040, readback 0x00400040 [2025-09-24 00:58:20.779] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:58:20.795] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:58:20.874] Loaded PowerVR consumer services. [2025-09-24 00:58:21.019] Waiting data available... [2025-09-24 00:58:21.035] 512+0 records in [2025-09-24 00:58:21.035] 512+0 records out [2025-09-24 00:58:21.083] Starting syslogd/klogd: done [2025-09-24 00:58:21.099] DML Start [2025-09-24 00:58:21.274] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:58:21.530] DML res1: 0 [2025-09-24 00:58:21.898] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:58:21.914] Read Success [2025-09-24 00:58:21.914] Verifying certificate... [2025-09-24 00:58:22.122] Verified OK [2025-09-24 00:58:22.138] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:58:23.924] Verified OK [2025-09-24 00:58:23.924] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:58:24.557] Verified OK [2025-09-24 00:58:24.557] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:58:27.116] fs.protected_hardlinks = 1 [2025-09-24 00:58:27.132] fs.protected_symlinks = 1 [2025-09-24 00:58:27.132] kernel.modules_disabled = 1 [2025-09-24 00:58:27.339] [2025-09-24 00:58:27.339] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:58:28.582] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:58:36.345] SBL1:1210.0.1.0 [2025-09-24 00:58:36.377] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:58:37.960] SBL2:1210.0.1.0 [2025-09-24 00:58:37.992] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:58:38.104] j-A [2025-09-24 00:58:45.476] The R5 Autosar Classic is running [2025-09-24 00:58:45.476] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:58:45.476] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:58:46.083] INIT: version 2.96 booting [2025-09-24 00:58:46.195] INIT: Entering runlevel: 5 [2025-09-24 00:58:46.355] mtd24 attached [2025-09-24 00:58:46.371] mtd28 attached [2025-09-24 00:58:46.387] mtd32 attached [2025-09-24 00:58:46.419] RTNETLINK answers: File exists [2025-09-24 00:58:46.465] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:58:46.465] ubi0:textures is mounted. [2025-09-24 00:58:46.465] ubi1:animations is mounted. [2025-09-24 00:58:46.465] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:58:46.465] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:58:46.465] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:58:46.465] ubi2:dml_code is mounted. [2025-09-24 00:58:46.465] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:58:46.494] data.LB_FadeInType0=100 [2025-09-24 00:58:46.494] data.CHLH_FadeInType0=0 [2025-09-24 00:58:46.494] data.WU_FadeInDelay=0 [2025-09-24 00:58:46.494] max_time_out=0 [2025-09-24 00:58:46.494] No splash screen [2025-09-24 00:58:46.494] stop dss Done [2025-09-24 00:58:46.526] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:58:46.542] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:58:46.579] /dev/mem opened. [2025-09-24 00:58:46.579] Memory mapped at address 0xffffa1913000. [2025-09-24 00:58:46.579] Read at address 0x00600018 (0xffffa1913018): 0x00000000 [2025-09-24 00:58:46.579] Write at address 0x00600018 (0xffffa1913018): 0x00400040, readback 0x00400040 [2025-09-24 00:58:46.754] Loaded PowerVR consumer services. [2025-09-24 00:58:46.851] Waiting data available... [2025-09-24 00:58:46.867] 512+0 records in [2025-09-24 00:58:46.883] 512+0 records out [2025-09-24 00:58:46.915] Starting syslogd/klogd: done [2025-09-24 00:58:46.931] DML Start [2025-09-24 00:58:47.106] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:58:47.331] DML res1: 0 [2025-09-24 00:58:47.818] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:58:47.818] Read Success [2025-09-24 00:58:47.818] Verifying certificate... [2025-09-24 00:58:48.122] Verified OK [2025-09-24 00:58:48.138] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:58:49.764] Verified OK [2025-09-24 00:58:49.764] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:58:50.387] Verified OK [2025-09-24 00:58:50.387] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:58:52.945] fs.protected_hardlinks = 1 [2025-09-24 00:58:52.945] fs.protected_symlinks = 1 [2025-09-24 00:58:52.945] kernel.modules_disabled = 1 [2025-09-24 00:58:53.153] [2025-09-24 00:58:53.153] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:58:54.346] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:59:02.140] SBL1:1210.0.1.0 [2025-09-24 00:59:02.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:59:03.755] SBL2:1210.0.1.0 [2025-09-24 00:59:03.803] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:59:03.915] j-A [2025-09-24 00:59:11.253] The R5 Autosar Classic is running [2025-09-24 00:59:11.278] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:59:11.278] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:59:11.885] INIT: version 2.96 booting [2025-09-24 00:59:11.998] INIT: Entering runlevel: 5 [2025-09-24 00:59:12.157] mtd28 attached [2025-09-24 00:59:12.173] mtd32 attached [2025-09-24 00:59:12.173] mtd24 attached [2025-09-24 00:59:12.189] ubi0:animations is mounted. [2025-09-24 00:59:12.221] RTNETLINK answers: File exists [2025-09-24 00:59:12.260] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:59:12.260] ubi1:dml_code is mounted. [2025-09-24 00:59:12.260] ubi2:textures is mounted. [2025-09-24 00:59:12.260] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:59:12.260] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:59:12.260] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:59:12.260] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:59:12.288] data.LB_FadeInType0=100 [2025-09-24 00:59:12.288] data.CHLH_FadeInType0=0 [2025-09-24 00:59:12.288] data.WU_FadeInDelay=0 [2025-09-24 00:59:12.288] max_time_out=0 [2025-09-24 00:59:12.288] No splash screen [2025-09-24 00:59:12.288] stop dss Done [2025-09-24 00:59:12.337] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:59:12.369] /dev/mem opened. [2025-09-24 00:59:12.369] Memory mapped at address 0xffff80baf000. [2025-09-24 00:59:12.369] Read at address 0x00600018 (0xffff80baf018): 0x00000000 [2025-09-24 00:59:12.369] Write at address 0x00600018 (0xffff80baf018): 0x00400040, readback 0x00400040 [2025-09-24 00:59:12.369] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:59:12.512] Loaded PowerVR consumer services. [2025-09-24 00:59:12.640] Waiting data available... [2025-09-24 00:59:12.656] 512+0 records in [2025-09-24 00:59:12.656] 512+0 records out [2025-09-24 00:59:12.672] Starting syslogd/klogd: done [2025-09-24 00:59:12.704] DML Start [2025-09-24 00:59:12.864] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:59:13.087] DML res1: 0 [2025-09-24 00:59:13.519] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:59:13.535] Read Success [2025-09-24 00:59:13.535] Verifying certificate... [2025-09-24 00:59:13.808] Verified OK [2025-09-24 00:59:13.824] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:59:15.513] Verified OK [2025-09-24 00:59:15.513] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:59:16.086] Verified OK [2025-09-24 00:59:16.086] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:59:18.627] fs.protected_hardlinks = 1 [2025-09-24 00:59:18.627] fs.protected_symlinks = 1 [2025-09-24 00:59:18.643] kernel.modules_disabled = 1 [2025-09-24 00:59:18.835] [2025-09-24 00:59:18.835] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:59:20.187] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:59:27.993] SBL1:1210.0.1.0 [2025-09-24 00:59:28.041] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:59:29.607] SBL2:1210.0.1.0 [2025-09-24 00:59:29.655] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:59:29.767] j-A [2025-09-24 00:59:37.138] The R5 Autosar Classic is running [2025-09-24 00:59:37.138] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 00:59:37.138] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 00:59:37.744] INIT: version 2.96 booting [2025-09-24 00:59:37.857] INIT: Entering runlevel: 5 [2025-09-24 00:59:38.000] mtd24 attached [2025-09-24 00:59:38.000] mtd28 attached [2025-09-24 00:59:38.017] mtd32 attached [2025-09-24 00:59:38.065] RTNETLINK answers: File exists [2025-09-24 00:59:38.112] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 00:59:38.112] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 00:59:38.112] ubi0:textures is mounted. [2025-09-24 00:59:38.112] ubi1:animations is mounted. [2025-09-24 00:59:38.112] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 00:59:38.112] ubi2:dml_code is mounted. [2025-09-24 00:59:38.112] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 00:59:38.112] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 00:59:38.139] data.LB_FadeInType0=100 [2025-09-24 00:59:38.139] data.CHLH_FadeInType0=0 [2025-09-24 00:59:38.139] data.WU_FadeInDelay=0 [2025-09-24 00:59:38.139] max_time_out=0 [2025-09-24 00:59:38.139] No splash screen [2025-09-24 00:59:38.139] stop dss Done [2025-09-24 00:59:38.166] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 00:59:38.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 00:59:38.198] /dev/mem opened. [2025-09-24 00:59:38.223] Memory mapped at address 0xffffbb420000. [2025-09-24 00:59:38.223] Read at address 0x00600018 (0xffffbb420018): 0x00000000 [2025-09-24 00:59:38.224] Write at address 0x00600018 (0xffffbb420018): 0x00400040, readback 0x00400040 [2025-09-24 00:59:38.351] Loaded PowerVR consumer services. [2025-09-24 00:59:38.487] Waiting data available... [2025-09-24 00:59:38.487] 512+0 records in [2025-09-24 00:59:38.487] 512+0 records out [2025-09-24 00:59:38.519] Starting syslogd/klogd: done [2025-09-24 00:59:38.535] DML Start [2025-09-24 00:59:38.679] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 00:59:38.919] DML res1: 0 [2025-09-24 00:59:39.422] Read DML Algo certificate (mtd31) and save to file [2025-09-24 00:59:39.422] Read Success [2025-09-24 00:59:39.422] Verifying certificate... [2025-09-24 00:59:39.646] Verified OK [2025-09-24 00:59:39.662] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 00:59:41.261] Verified OK [2025-09-24 00:59:41.261] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 00:59:41.820] Verified OK [2025-09-24 00:59:41.820] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 00:59:44.617] fs.protected_hardlinks = 1 [2025-09-24 00:59:44.633] fs.protected_symlinks = 1 [2025-09-24 00:59:44.633] kernel.modules_disabled = 1 [2025-09-24 00:59:44.842] [2025-09-24 00:59:44.842] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 00:59:46.012] RTNETLINK answers: Cannot assign requested address [2025-09-24 00:59:53.797] SBL1:1210.0.1.0 [2025-09-24 00:59:53.829] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 00:59:55.412] SBL2:1210.0.1.0 [2025-09-24 00:59:55.444] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 00:59:55.556] j-A [2025-09-24 01:00:02.930] The R5 Autosar Classic is running [2025-09-24 01:00:02.930] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:00:02.930] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:00:03.537] INIT: version 2.96 booting [2025-09-24 01:00:03.634] INIT: Entering runlevel: 5 [2025-09-24 01:00:03.793] mtd28 attached [2025-09-24 01:00:03.809] mtd32 attached [2025-09-24 01:00:03.825] mtd24 attached [2025-09-24 01:00:03.857] ubi0:animations is mounted. [2025-09-24 01:00:03.873] ubi1:dml_code is mounted. [2025-09-24 01:00:03.873] RTNETLINK answers: File exists [2025-09-24 01:00:03.932] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:00:03.932] ubi2:textures is mounted. [2025-09-24 01:00:03.932] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:00:03.932] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:00:03.932] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:00:03.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:00:03.932] data.LB_FadeInType0=100 [2025-09-24 01:00:03.932] data.CHLH_FadeInType0=0 [2025-09-24 01:00:03.932] data.WU_FadeInDelay=0 [2025-09-24 01:00:03.932] max_time_out=0 [2025-09-24 01:00:03.932] No splash screen [2025-09-24 01:00:03.932] stop dss Done [2025-09-24 01:00:03.992] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:00:03.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:00:03.992] /dev/mem opened. [2025-09-24 01:00:03.992] Memory mapped at address 0xffff87ef7000. [2025-09-24 01:00:03.992] Read at address 0x00600018 (0xffff87ef7018): 0x00000000 [2025-09-24 01:00:03.992] Write at address 0x00600018 (0xffff87ef7018): 0x00400040, readback 0x00400040 [2025-09-24 01:00:04.136] Loaded PowerVR consumer services. [2025-09-24 01:00:04.264] Waiting data available... [2025-09-24 01:00:04.280] 512+0 records in [2025-09-24 01:00:04.296] 512+0 records out [2025-09-24 01:00:04.312] Starting syslogd/klogd: done [2025-09-24 01:00:04.328] DML Start [2025-09-24 01:00:04.520] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:00:04.743] DML res1: 0 [2025-09-24 01:00:05.187] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:00:05.187] Read Success [2025-09-24 01:00:05.187] Verifying certificate... [2025-09-24 01:00:05.443] Verified OK [2025-09-24 01:00:05.458] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:00:07.164] Verified OK [2025-09-24 01:00:07.164] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:00:07.729] Verified OK [2025-09-24 01:00:07.729] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:00:10.206] fs.protected_hardlinks = 1 [2025-09-24 01:00:10.222] fs.protected_symlinks = 1 [2025-09-24 01:00:10.238] kernel.modules_disabled = 1 [2025-09-24 01:00:10.446] [2025-09-24 01:00:10.446] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:00:11.805] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:00:19.591] SBL1:1210.0.1.0 [2025-09-24 01:00:19.639] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:00:21.206] SBL2:1210.0.1.0 [2025-09-24 01:00:21.254] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:00:21.366] j-A [2025-09-24 01:00:28.706] The R5 Autosar Classic is running [2025-09-24 01:00:28.731] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:00:28.731] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:00:29.338] INIT: version 2.96 booting [2025-09-24 01:00:29.450] INIT: Entering runlevel: 5 [2025-09-24 01:00:29.610] mtd28 attached [2025-09-24 01:00:29.610] mtd24 attached [2025-09-24 01:00:29.642] mtd32 attached [2025-09-24 01:00:29.674] ubi0:animations is mounted. [2025-09-24 01:00:29.740] RTNETLINK answers: File exists [2025-09-24 01:00:29.740] ubi1:textures is mounted. [2025-09-24 01:00:29.740] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:00:29.740] ubi2:dml_code is mounted. [2025-09-24 01:00:29.740] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:00:29.740] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:00:29.740] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:00:29.740] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:00:29.740] data.LB_FadeInType0=100 [2025-09-24 01:00:29.740] data.CHLH_FadeInType0=0 [2025-09-24 01:00:29.740] data.WU_FadeInDelay=0 [2025-09-24 01:00:29.740] max_time_out=0 [2025-09-24 01:00:29.740] No splash screen [2025-09-24 01:00:29.740] stop dss Done [2025-09-24 01:00:29.780] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:00:29.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:00:29.820] /dev/mem opened. [2025-09-24 01:00:29.820] Memory mapped at address 0xffffba145000. [2025-09-24 01:00:29.820] Read at address 0x00600018 (0xffffba145018): 0x00000000 [2025-09-24 01:00:29.820] Write at address 0x00600018 (0xffffba145018): 0x00400040, readback 0x00400040 [2025-09-24 01:00:30.044] Loaded PowerVR consumer services. [2025-09-24 01:00:30.077] Waiting data available... [2025-09-24 01:00:30.109] 512+0 records in [2025-09-24 01:00:30.109] 512+0 records out [2025-09-24 01:00:30.157] Starting syslogd/klogd: done [2025-09-24 01:00:30.173] DML Start [2025-09-24 01:00:30.316] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:00:30.588] DML res1: 0 [2025-09-24 01:00:30.987] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:00:30.987] Read Success [2025-09-24 01:00:30.987] Verifying certificate... [2025-09-24 01:00:31.210] Verified OK [2025-09-24 01:00:31.226] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:00:32.819] Verified OK [2025-09-24 01:00:32.819] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:00:33.483] Verified OK [2025-09-24 01:00:33.483] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:00:36.153] fs.protected_hardlinks = 1 [2025-09-24 01:00:36.153] fs.protected_symlinks = 1 [2025-09-24 01:00:36.168] kernel.modules_disabled = 1 [2025-09-24 01:00:36.360] [2025-09-24 01:00:36.360] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:00:37.616] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:00:45.411] SBL1:1210.0.1.0 [2025-09-24 01:00:45.443] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:00:47.026] SBL2:1210.0.1.0 [2025-09-24 01:00:47.058] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:00:47.169] j-A [2025-09-24 01:00:54.543] The R5 Autosar Classic is running [2025-09-24 01:00:54.543] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:00:54.543] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:00:55.150] INIT: version 2.96 booting [2025-09-24 01:00:55.263] INIT: Entering runlevel: 5 [2025-09-24 01:00:55.422] mtd32 attached [2025-09-24 01:00:55.422] mtd24 attached [2025-09-24 01:00:55.438] mtd28 attached [2025-09-24 01:00:55.486] RTNETLINK answers: File exists [2025-09-24 01:00:55.551] ubi0:dml_code is mounted. [2025-09-24 01:00:55.551] ubi2:animations is mounted. [2025-09-24 01:00:55.551] ubi1:textures is mounted. [2025-09-24 01:00:55.551] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:00:55.551] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:00:55.551] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:00:55.551] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:00:55.551] data.LB_FadeInType0=100 [2025-09-24 01:00:55.551] data.CHLH_FadeInType0=0 [2025-09-24 01:00:55.551] data.WU_FadeInDelay=0 [2025-09-24 01:00:55.551] max_time_out=0 [2025-09-24 01:00:55.551] No splash screen [2025-09-24 01:00:55.551] stop dss Done [2025-09-24 01:00:55.551] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:00:55.602] /dev/mem opened. [2025-09-24 01:00:55.602] Memory mapped at address 0xffff98f97000. [2025-09-24 01:00:55.602] Read at address 0x00600018 (0xffff98f97018): 0x00000000 [2025-09-24 01:00:55.602] Write at address 0x00600018 (0xffff98f97018): 0x00400040, readback 0x00400040 [2025-09-24 01:00:55.664] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:00:55.664] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:00:55.807] Loaded PowerVR consumer services. [2025-09-24 01:00:55.920] Waiting data available... [2025-09-24 01:00:55.936] 512+0 records in [2025-09-24 01:00:55.952] 512+0 records out [2025-09-24 01:00:55.968] Starting syslogd/klogd: done [2025-09-24 01:00:55.984] DML Start [2025-09-24 01:00:56.143] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:00:56.416] DML res1: 0 [2025-09-24 01:00:56.783] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:00:56.804] Read Success [2025-09-24 01:00:56.804] Verifying certificate... [2025-09-24 01:00:57.044] Verified OK [2025-09-24 01:00:57.060] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:00:58.723] Verified OK [2025-09-24 01:00:58.739] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:00:59.347] Verified OK [2025-09-24 01:00:59.347] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:01:01.921] fs.protected_hardlinks = 1 [2025-09-24 01:01:01.921] fs.protected_symlinks = 1 [2025-09-24 01:01:01.937] kernel.modules_disabled = 1 [2025-09-24 01:01:02.128] [2025-09-24 01:01:02.128] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:01:03.418] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:01:11.205] SBL1:1210.0.1.0 [2025-09-24 01:01:11.253] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:01:12.819] SBL2:1210.0.1.0 [2025-09-24 01:01:12.867] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:01:12.979] j-A [2025-09-24 01:01:20.318] The R5 Autosar Classic is running [2025-09-24 01:01:20.344] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:01:20.344] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:01:20.951] INIT: version 2.96 booting [2025-09-24 01:01:21.063] INIT: Entering runlevel: 5 [2025-09-24 01:01:21.207] mtd24 attached [2025-09-24 01:01:21.239] mtd28 attached [2025-09-24 01:01:21.255] ubi0:textures is mounted. [2025-09-24 01:01:21.287] ubi1:animations is mounted. [2025-09-24 01:01:21.287] mtd32 attached [2025-09-24 01:01:21.338] RTNETLINK answers: File exists [2025-09-24 01:01:21.338] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:01:21.338] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:01:21.338] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:01:21.338] ubi2:dml_code is mounted. [2025-09-24 01:01:21.338] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:01:21.338] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:01:21.361] data.LB_FadeInType0=100 [2025-09-24 01:01:21.361] data.CHLH_FadeInType0=0 [2025-09-24 01:01:21.361] data.WU_FadeInDelay=0 [2025-09-24 01:01:21.361] max_time_out=0 [2025-09-24 01:01:21.361] No splash screen [2025-09-24 01:01:21.361] stop dss Done [2025-09-24 01:01:21.377] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:01:21.393] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:01:21.441] /dev/mem opened. [2025-09-24 01:01:21.441] Memory mapped at address 0xffffa55db000. [2025-09-24 01:01:21.441] Read at address 0x00600018 (0xffffa55db018): 0x00000000 [2025-09-24 01:01:21.441] Write at address 0x00600018 (0xffffa55db018): 0x00400040, readback 0x00400040 [2025-09-24 01:01:21.537] Loaded PowerVR consumer services. [2025-09-24 01:01:21.696] Waiting data available... [2025-09-24 01:01:21.712] 512+0 records in [2025-09-24 01:01:21.712] 512+0 records out [2025-09-24 01:01:21.728] Starting syslogd/klogd: done [2025-09-24 01:01:21.760] DML Start [2025-09-24 01:01:21.905] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:01:22.080] DML res1: 0 [2025-09-24 01:01:22.656] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:01:22.677] Read Success [2025-09-24 01:01:22.677] Verifying certificate... [2025-09-24 01:01:22.917] Verified OK [2025-09-24 01:01:22.949] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:01:24.593] Verified OK [2025-09-24 01:01:24.593] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:01:25.101] Verified OK [2025-09-24 01:01:25.101] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:01:27.500] fs.protected_hardlinks = 1 [2025-09-24 01:01:27.516] fs.protected_symlinks = 1 [2025-09-24 01:01:27.516] kernel.modules_disabled = 1 [2025-09-24 01:01:27.707] [2025-09-24 01:01:27.707] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:01:29.178] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:01:37.021] SBL1:1210.0.1.0 [2025-09-24 01:01:37.052] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:01:38.635] SBL2:1210.0.1.0 [2025-09-24 01:01:38.667] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:01:38.779] j-A [2025-09-24 01:01:46.152] The R5 Autosar Classic is running [2025-09-24 01:01:46.152] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:01:46.152] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:01:46.761] INIT: version 2.96 booting [2025-09-24 01:01:46.872] INIT: Entering runlevel: 5 [2025-09-24 01:01:47.032] mtd32 attached [2025-09-24 01:01:47.032] mtd28 attached [2025-09-24 01:01:47.048] mtd24 attached [2025-09-24 01:01:47.129] RTNETLINK answers: File exists [2025-09-24 01:01:47.129] ubi0:dml_code is mounted. [2025-09-24 01:01:47.129] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:01:47.129] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:01:47.129] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:01:47.129] ubi1:animations is mounted. [2025-09-24 01:01:47.129] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:01:47.129] ubi2:textures is mounted. [2025-09-24 01:01:47.129] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:01:47.154] data.LB_FadeInType0=100 [2025-09-24 01:01:47.154] data.CHLH_FadeInType0=0 [2025-09-24 01:01:47.154] data.WU_FadeInDelay=0 [2025-09-24 01:01:47.154] max_time_out=0 [2025-09-24 01:01:47.154] No splash screen [2025-09-24 01:01:47.154] stop dss Done [2025-09-24 01:01:47.181] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:01:47.181] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:01:47.197] /dev/mem opened. [2025-09-24 01:01:47.223] Memory mapped at address 0xffffa180d000. [2025-09-24 01:01:47.223] Read at address 0x00600018 (0xffffa180d018): 0x00000000 [2025-09-24 01:01:47.223] Write at address 0x00600018 (0xffffa180d018): 0x00400040, readback 0x00400040 [2025-09-24 01:01:47.334] Loaded PowerVR consumer services. [2025-09-24 01:01:47.495] Waiting data available... [2025-09-24 01:01:47.511] 512+0 records in [2025-09-24 01:01:47.527] 512+0 records out [2025-09-24 01:01:47.559] Starting syslogd/klogd: done [2025-09-24 01:01:47.575] DML Start [2025-09-24 01:01:47.750] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:01:47.959] DML res1: 0 [2025-09-24 01:01:48.451] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:01:48.451] Read Success [2025-09-24 01:01:48.451] Verifying certificate... [2025-09-24 01:01:48.755] Verified OK [2025-09-24 01:01:48.771] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:01:50.658] Verified OK [2025-09-24 01:01:50.658] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:01:51.090] Verified OK [2025-09-24 01:01:51.090] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:01:53.329] fs.protected_hardlinks = 1 [2025-09-24 01:01:53.329] fs.protected_symlinks = 1 [2025-09-24 01:01:53.345] kernel.modules_disabled = 1 [2025-09-24 01:01:53.536] [2025-09-24 01:01:53.536] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:01:54.981] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:02:02.832] SBL1:1210.0.1.0 [2025-09-24 01:02:02.880] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:02:04.447] SBL2:1210.0.1.0 [2025-09-24 01:02:04.495] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:02:04.590] j-A [2025-09-24 01:02:11.945] The R5 Autosar Classic is running [2025-09-24 01:02:11.969] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:02:11.969] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:02:12.578] INIT: version 2.96 booting [2025-09-24 01:02:12.689] INIT: Entering runlevel: 5 [2025-09-24 01:02:12.833] mtd24 attached [2025-09-24 01:02:12.849] mtd28 attached [2025-09-24 01:02:12.865] mtd32 attached [2025-09-24 01:02:12.881] ubi0:textures is mounted. [2025-09-24 01:02:12.913] ubi1:animations is mounted. [2025-09-24 01:02:12.913] RTNETLINK answers: File exists [2025-09-24 01:02:12.970] ubi2:dml_code is mounted. [2025-09-24 01:02:12.970] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:02:12.970] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:02:12.970] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:02:12.970] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:02:12.970] data.LB_FadeInType0=100 [2025-09-24 01:02:12.970] data.CHLH_FadeInType0=0 [2025-09-24 01:02:12.970] data.WU_FadeInDelay=0 [2025-09-24 01:02:12.970] max_time_out=0 [2025-09-24 01:02:12.970] No splash screen [2025-09-24 01:02:12.970] stop dss Done [2025-09-24 01:02:12.970] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:02:13.052] /dev/mem opened. [2025-09-24 01:02:13.052] Memory mapped at address 0xffffaed07000. [2025-09-24 01:02:13.052] Read at address 0x00600018 (0xffffaed07018): 0x00000000 [2025-09-24 01:02:13.052] Write at address 0x00600018 (0xffffaed07018): 0x00400040, readback 0x00400040 [2025-09-24 01:02:13.052] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:02:13.052] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:02:13.308] Loaded PowerVR consumer services. [2025-09-24 01:02:13.340] Waiting data available... [2025-09-24 01:02:13.356] 512+0 records in [2025-09-24 01:02:13.356] 512+0 records out [2025-09-24 01:02:13.388] Starting syslogd/klogd: done [2025-09-24 01:02:13.403] DML Start [2025-09-24 01:02:13.580] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:02:13.804] DML res1: 0 [2025-09-24 01:02:14.196] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:02:14.196] Read Success [2025-09-24 01:02:14.196] Verifying certificate... [2025-09-24 01:02:14.436] Verified OK [2025-09-24 01:02:14.452] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:02:16.225] Verified OK [2025-09-24 01:02:16.225] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:02:16.765] Verified OK [2025-09-24 01:02:16.765] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:02:19.420] fs.protected_hardlinks = 1 [2025-09-24 01:02:19.420] fs.protected_symlinks = 1 [2025-09-24 01:02:19.436] kernel.modules_disabled = 1 [2025-09-24 01:02:19.627] [2025-09-24 01:02:19.627] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:02:20.847] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:02:28.641] SBL1:1210.0.1.0 [2025-09-24 01:02:28.689] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:02:30.256] SBL2:1210.0.1.0 [2025-09-24 01:02:30.305] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:02:30.400] j-A [2025-09-24 01:02:37.754] The R5 Autosar Classic is running [2025-09-24 01:02:37.777] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:02:37.777] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:02:38.384] INIT: version 2.96 booting [2025-09-24 01:02:38.496] INIT: Entering runlevel: 5 [2025-09-24 01:02:38.640] mtd28 attached [2025-09-24 01:02:38.656] mtd32 attached [2025-09-24 01:02:38.672] mtd24 attached [2025-09-24 01:02:38.720] ubi0:animations is mounted. [2025-09-24 01:02:38.720] RTNETLINK answers: File exists [2025-09-24 01:02:38.782] ubi1:dml_code is mounted. [2025-09-24 01:02:38.782] ubi2:textures is mounted. [2025-09-24 01:02:38.782] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:02:38.782] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:02:38.782] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:02:38.782] data.LB_FadeInType0=100 [2025-09-24 01:02:38.782] data.CHLH_FadeInType0=0 [2025-09-24 01:02:38.782] data.WU_FadeInDelay=0 [2025-09-24 01:02:38.782] max_time_out=0 [2025-09-24 01:02:38.782] No splash screen [2025-09-24 01:02:38.782] stop dss Done [2025-09-24 01:02:38.782] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:02:38.782] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:02:38.813] /dev/mem opened. [2025-09-24 01:02:38.840] Memory mapped at address 0xffff9866c000. [2025-09-24 01:02:38.840] Read at address 0x00600018 (0xffff9866c018): 0x00000000 [2025-09-24 01:02:38.840] Write at address 0x00600018 (0xffff9866c018): 0x00400040, readback 0x00400040 [2025-09-24 01:02:38.872] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:02:38.888] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:02:39.016] Loaded PowerVR consumer services. [2025-09-24 01:02:39.128] Waiting data available... [2025-09-24 01:02:39.144] 512+0 records in [2025-09-24 01:02:39.144] 512+0 records out [2025-09-24 01:02:39.191] Starting syslogd/klogd: done [2025-09-24 01:02:39.207] DML Start [2025-09-24 01:02:39.399] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:02:39.607] DML res1: 0 [2025-09-24 01:02:40.038] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:02:40.060] Read Success [2025-09-24 01:02:40.060] Verifying certificate... [2025-09-24 01:02:40.283] Verified OK [2025-09-24 01:02:40.283] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:02:41.909] Verified OK [2025-09-24 01:02:41.909] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:02:42.533] Verified OK [2025-09-24 01:02:42.533] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:02:45.251] fs.protected_hardlinks = 1 [2025-09-24 01:02:45.251] fs.protected_symlinks = 1 [2025-09-24 01:02:45.267] kernel.modules_disabled = 1 [2025-09-24 01:02:45.460] [2025-09-24 01:02:45.460] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:02:46.605] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:02:54.427] SBL1:1210.0.1.0 [2025-09-24 01:02:54.475] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:02:56.042] SBL2:1210.0.1.0 [2025-09-24 01:02:56.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:02:56.185] j-A [2025-09-24 01:03:03.539] The R5 Autosar Classic is running [2025-09-24 01:03:03.562] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:03:03.562] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:03:04.169] INIT: version 2.96 booting [2025-09-24 01:03:04.282] INIT: Entering runlevel: 5 [2025-09-24 01:03:04.425] mtd28 attached [2025-09-24 01:03:04.441] mtd32 attached [2025-09-24 01:03:04.441] mtd24 attached [2025-09-24 01:03:04.560] ubi0:animations is mounted. [2025-09-24 01:03:04.560] RTNETLINK answers: File exists [2025-09-24 01:03:04.560] ubi2:textures is mounted. [2025-09-24 01:03:04.560] ubi1:dml_code is mounted. [2025-09-24 01:03:04.560] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:03:04.560] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:03:04.560] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:03:04.560] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:03:04.560] data.LB_FadeInType0=100 [2025-09-24 01:03:04.560] data.CHLH_FadeInType0=0 [2025-09-24 01:03:04.560] data.WU_FadeInDelay=0 [2025-09-24 01:03:04.560] max_time_out=0 [2025-09-24 01:03:04.560] No splash screen [2025-09-24 01:03:04.560] stop dss Done [2025-09-24 01:03:04.560] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:03:04.634] /dev/mem opened. [2025-09-24 01:03:04.634] Memory mapped at address 0xffffb57a5000. [2025-09-24 01:03:04.634] Read at address 0x00600018 (0xffffb57a5018): 0x00000000 [2025-09-24 01:03:04.634] Write at address 0x00600018 (0xffffb57a5018): 0x00400040, readback 0x00400040 [2025-09-24 01:03:04.634] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:03:04.651] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:03:04.730] Loaded PowerVR consumer services. [2025-09-24 01:03:04.905] Waiting data available... [2025-09-24 01:03:04.921] 512+0 records in [2025-09-24 01:03:04.921] 512+0 records out [2025-09-24 01:03:04.970] Starting syslogd/klogd: done [2025-09-24 01:03:04.986] DML Start [2025-09-24 01:03:05.161] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:03:05.369] DML res1: 0 [2025-09-24 01:03:05.846] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:03:05.846] Read Success [2025-09-24 01:03:05.846] Verifying certificate... [2025-09-24 01:03:06.118] Verified OK [2025-09-24 01:03:06.134] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:03:07.747] Verified OK [2025-09-24 01:03:07.747] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:03:08.363] Verified OK [2025-09-24 01:03:08.363] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:03:10.953] fs.protected_hardlinks = 1 [2025-09-24 01:03:10.953] fs.protected_symlinks = 1 [2025-09-24 01:03:10.969] kernel.modules_disabled = 1 [2025-09-24 01:03:11.161] [2025-09-24 01:03:11.161] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:03:12.415] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:03:20.236] SBL1:1210.0.1.0 [2025-09-24 01:03:20.284] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:03:21.851] SBL2:1210.0.1.0 [2025-09-24 01:03:21.899] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:03:22.011] j-A [2025-09-24 01:03:29.349] The R5 Autosar Classic is running [2025-09-24 01:03:29.380] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:03:29.380] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:03:29.987] INIT: version 2.96 booting [2025-09-24 01:03:30.082] INIT: Entering runlevel: 5 [2025-09-24 01:03:30.259] mtd32 attached [2025-09-24 01:03:30.259] mtd24 attached [2025-09-24 01:03:30.275] mtd28 attached [2025-09-24 01:03:30.322] RTNETLINK answers: File exists [2025-09-24 01:03:30.380] ubi1:textures is mounted. [2025-09-24 01:03:30.380] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:03:30.380] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:03:30.380] ubi2:animations is mounted. [2025-09-24 01:03:30.380] ubi0:dml_code is mounted. [2025-09-24 01:03:30.380] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:03:30.380] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:03:30.380] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:03:30.380] data.LB_FadeInType0=100 [2025-09-24 01:03:30.380] data.CHLH_FadeInType0=0 [2025-09-24 01:03:30.380] data.WU_FadeInDelay=0 [2025-09-24 01:03:30.380] max_time_out=0 [2025-09-24 01:03:30.380] No splash screen [2025-09-24 01:03:30.380] stop dss Done [2025-09-24 01:03:30.428] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:03:30.463] /dev/mem opened. [2025-09-24 01:03:30.463] Memory mapped at address 0xffffbae56000. [2025-09-24 01:03:30.463] Read at address 0x00600018 (0xffffbae56018): 0x00000000 [2025-09-24 01:03:30.463] Write at address 0x00600018 (0xffffbae56018): 0x00400040, readback 0x00400040 [2025-09-24 01:03:30.463] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:03:30.576] Loaded PowerVR consumer services. [2025-09-24 01:03:30.735] Waiting data available... [2025-09-24 01:03:30.751] 512+0 records in [2025-09-24 01:03:30.751] 512+0 records out [2025-09-24 01:03:30.798] Starting syslogd/klogd: done [2025-09-24 01:03:30.814] DML Start [2025-09-24 01:03:30.991] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:03:31.215] DML res1: 0 [2025-09-24 01:03:31.683] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:03:31.683] Read Success [2025-09-24 01:03:31.683] Verifying certificate... [2025-09-24 01:03:31.955] Verified OK [2025-09-24 01:03:31.971] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:03:33.676] Verified OK [2025-09-24 01:03:33.676] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:03:34.203] Verified OK [2025-09-24 01:03:34.203] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:03:36.665] fs.protected_hardlinks = 1 [2025-09-24 01:03:36.665] fs.protected_symlinks = 1 [2025-09-24 01:03:36.681] kernel.modules_disabled = 1 [2025-09-24 01:03:36.873] [2025-09-24 01:03:36.873] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:03:38.231] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:03:46.081] SBL1:1210.0.1.0 [2025-09-24 01:03:46.129] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:03:47.696] SBL2:1210.0.1.0 [2025-09-24 01:03:47.744] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:03:47.840] j-A [2025-09-24 01:03:55.194] The R5 Autosar Classic is running [2025-09-24 01:03:55.219] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:03:55.219] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:03:55.827] INIT: version 2.96 booting [2025-09-24 01:03:55.938] INIT: Entering runlevel: 5 [2025-09-24 01:03:56.083] mtd24 attached [2025-09-24 01:03:56.099] mtd32 attached [2025-09-24 01:03:56.114] mtd28 attached [2025-09-24 01:03:56.162] ubi0:textures is mounted. [2025-09-24 01:03:56.162] RTNETLINK answers: File exists [2025-09-24 01:03:56.201] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:03:56.201] ubi1:dml_code is mounted. [2025-09-24 01:03:56.201] ubi2:animations is mounted. [2025-09-24 01:03:56.201] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:03:56.201] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:03:56.201] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:03:56.201] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:03:56.223] data.LB_FadeInType0=100 [2025-09-24 01:03:56.223] data.CHLH_FadeInType0=0 [2025-09-24 01:03:56.223] data.WU_FadeInDelay=0 [2025-09-24 01:03:56.223] max_time_out=0 [2025-09-24 01:03:56.223] No splash screen [2025-09-24 01:03:56.223] stop dss Done [2025-09-24 01:03:56.296] /dev/mem opened. [2025-09-24 01:03:56.296] Memory mapped at address 0xffff93b14000. [2025-09-24 01:03:56.296] Read at address 0x00600018 (0xffff93b14018): 0x00000000 [2025-09-24 01:03:56.296] Write at address 0x00600018 (0xffff93b14018): 0x00400040, readback 0x00400040 [2025-09-24 01:03:56.296] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:03:56.328] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:03:56.440] Loaded PowerVR consumer services. [2025-09-24 01:03:56.584] Waiting data available... [2025-09-24 01:03:56.599] 512+0 records in [2025-09-24 01:03:56.615] 512+0 records out [2025-09-24 01:03:56.631] Starting syslogd/klogd: done [2025-09-24 01:03:56.647] DML Start [2025-09-24 01:03:56.808] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:03:57.015] DML res1: 0 [2025-09-24 01:03:57.478] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:03:57.478] Read Success [2025-09-24 01:03:57.478] Verifying certificate... [2025-09-24 01:03:57.701] Verified OK [2025-09-24 01:03:57.717] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:03:59.217] Verified OK [2025-09-24 01:03:59.217] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:03:59.745] Verified OK [2025-09-24 01:03:59.745] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:04:02.591] fs.protected_hardlinks = 1 [2025-09-24 01:04:02.591] fs.protected_symlinks = 1 [2025-09-24 01:04:02.606] kernel.modules_disabled = 1 [2025-09-24 01:04:02.798] [2025-09-24 01:04:02.798] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:04:04.062] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:04:11.890] SBL1:1210.0.1.0 [2025-09-24 01:04:11.938] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:04:13.505] SBL2:1210.0.1.0 [2025-09-24 01:04:13.552] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:04:13.648] j-A [2025-09-24 01:04:21.004] The R5 Autosar Classic is running [2025-09-24 01:04:21.025] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:04:21.025] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:04:21.632] INIT: version 2.96 booting [2025-09-24 01:04:21.744] INIT: Entering runlevel: 5 [2025-09-24 01:04:21.904] mtd28 attached [2025-09-24 01:04:21.904] mtd32 attached [2025-09-24 01:04:21.920] mtd24 attached [2025-09-24 01:04:21.952] ubi0:animations is mounted. [2025-09-24 01:04:21.968] RTNETLINK answers: File exists [2025-09-24 01:04:22.022] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:04:22.022] ubi1:dml_code is mounted. [2025-09-24 01:04:22.022] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:04:22.022] ubi2:textures is mounted. [2025-09-24 01:04:22.022] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:04:22.023] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:04:22.023] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:04:22.023] data.LB_FadeInType0=100 [2025-09-24 01:04:22.023] data.CHLH_FadeInType0=0 [2025-09-24 01:04:22.023] data.WU_FadeInDelay=0 [2025-09-24 01:04:22.023] max_time_out=0 [2025-09-24 01:04:22.023] No splash screen [2025-09-24 01:04:22.023] stop dss Done [2025-09-24 01:04:22.101] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:04:22.101] /dev/mem opened. [2025-09-24 01:04:22.101] Memory mapped at address 0xffffa7aba000. [2025-09-24 01:04:22.101] Read at address 0x00600018 (0xffffa7aba018): 0x00000000 [2025-09-24 01:04:22.101] Write at address 0x00600018 (0xffffa7aba018): 0x00400040, readback 0x00400040 [2025-09-24 01:04:22.101] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:04:22.325] Loaded PowerVR consumer services. [2025-09-24 01:04:22.357] Waiting data available... [2025-09-24 01:04:22.389] 512+0 records in [2025-09-24 01:04:22.389] 512+0 records out [2025-09-24 01:04:22.436] Starting syslogd/klogd: done [2025-09-24 01:04:22.452] DML Start [2025-09-24 01:04:22.629] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:04:22.868] DML res1: 0 [2025-09-24 01:04:23.296] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:04:23.296] Read Success [2025-09-24 01:04:23.296] Verifying certificate... [2025-09-24 01:04:23.534] Verified OK [2025-09-24 01:04:23.550] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:04:25.115] Verified OK [2025-09-24 01:04:25.115] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:04:25.754] Verified OK [2025-09-24 01:04:25.754] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:04:28.472] fs.protected_hardlinks = 1 [2025-09-24 01:04:28.488] fs.protected_symlinks = 1 [2025-09-24 01:04:28.488] kernel.modules_disabled = 1 [2025-09-24 01:04:28.679] [2025-09-24 01:04:28.679] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:04:29.906] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:04:37.676] SBL1:1210.0.1.0 [2025-09-24 01:04:37.724] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:04:39.291] SBL2:1210.0.1.0 [2025-09-24 01:04:39.339] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:04:39.451] j-A [2025-09-24 01:04:46.791] The R5 Autosar Classic is running [2025-09-24 01:04:46.821] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:04:46.821] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:04:47.429] INIT: version 2.96 booting [2025-09-24 01:04:47.540] INIT: Entering runlevel: 5 [2025-09-24 01:04:47.701] mtd28 attached [2025-09-24 01:04:47.701] mtd24 attached [2025-09-24 01:04:47.717] mtd32 attached [2025-09-24 01:04:47.764] RTNETLINK answers: File exists [2025-09-24 01:04:47.764] ubi0:animations is mounted. [2025-09-24 01:04:47.825] ubi2:dml_code is mounted. [2025-09-24 01:04:47.825] ubi1:textures is mounted. [2025-09-24 01:04:47.825] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:04:47.825] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:04:47.825] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:04:47.825] data.LB_FadeInType0=100 [2025-09-24 01:04:47.825] data.CHLH_FadeInType0=0 [2025-09-24 01:04:47.825] data.WU_FadeInDelay=0 [2025-09-24 01:04:47.825] max_time_out=0 [2025-09-24 01:04:47.825] No splash screen [2025-09-24 01:04:47.825] stop dss Done [2025-09-24 01:04:47.825] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:04:47.825] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:04:47.893] /dev/mem opened. [2025-09-24 01:04:47.893] Memory mapped at address 0xffff987cf000. [2025-09-24 01:04:47.893] Read at address 0x00600018 (0xffff987cf018): 0x00000000 [2025-09-24 01:04:47.893] Write at address 0x00600018 (0xffff987cf018): 0x00400040, readback 0x00400040 [2025-09-24 01:04:47.893] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:04:47.909] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:04:48.006] Loaded PowerVR consumer services. [2025-09-24 01:04:48.165] Waiting data available... [2025-09-24 01:04:48.182] 512+0 records in [2025-09-24 01:04:48.182] 512+0 records out [2025-09-24 01:04:48.229] Starting syslogd/klogd: done [2025-09-24 01:04:48.245] DML Start [2025-09-24 01:04:48.421] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:04:48.597] DML res1: 0 [2025-09-24 01:04:49.108] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:04:49.108] Read Success [2025-09-24 01:04:49.108] Verifying certificate... [2025-09-24 01:04:49.331] Verified OK [2025-09-24 01:04:49.347] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:04:51.053] Verified OK [2025-09-24 01:04:51.053] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:04:51.596] Verified OK [2025-09-24 01:04:51.612] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:04:54.169] fs.protected_hardlinks = 1 [2025-09-24 01:04:54.185] fs.protected_symlinks = 1 [2025-09-24 01:04:54.185] kernel.modules_disabled = 1 [2025-09-24 01:04:54.377] [2025-09-24 01:04:54.393] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:04:55.655] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:05:03.484] SBL1:1210.0.1.0 [2025-09-24 01:05:03.531] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:05:05.098] SBL2:1210.0.1.0 [2025-09-24 01:05:05.146] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:05:05.241] j-A [2025-09-24 01:05:12.598] The R5 Autosar Classic is running [2025-09-24 01:05:12.620] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:05:12.620] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:05:13.228] INIT: version 2.96 booting [2025-09-24 01:05:13.339] INIT: Entering runlevel: 5 [2025-09-24 01:05:13.500] mtd32 attached [2025-09-24 01:05:13.516] mtd24 attached [2025-09-24 01:05:13.516] mtd28 attached [2025-09-24 01:05:13.548] ubi0:dml_code is mounted. [2025-09-24 01:05:13.579] ubi1:textures is mounted. [2025-09-24 01:05:13.579] RTNETLINK answers: File exists [2025-09-24 01:05:13.631] ubi2:animations is mounted. [2025-09-24 01:05:13.631] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:05:13.631] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:05:13.631] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:05:13.631] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:05:13.631] data.LB_FadeInType0=100 [2025-09-24 01:05:13.631] data.CHLH_FadeInType0=0 [2025-09-24 01:05:13.631] data.WU_FadeInDelay=0 [2025-09-24 01:05:13.631] max_time_out=0 [2025-09-24 01:05:13.631] No splash screen [2025-09-24 01:05:13.631] stop dss Done [2025-09-24 01:05:13.631] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:05:13.674] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:05:13.674] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:05:13.674] /dev/mem opened. [2025-09-24 01:05:13.674] Memory mapped at address 0xffffb5b09000. [2025-09-24 01:05:13.700] Read at address 0x00600018 (0xffffb5b09018): 0x00000000 [2025-09-24 01:05:13.700] Write at address 0x00600018 (0xffffb5b09018): 0x00400040, readback 0x00400040 [2025-09-24 01:05:13.892] Loaded PowerVR consumer services. [2025-09-24 01:05:13.988] Waiting data available... [2025-09-24 01:05:13.988] 512+0 records in [2025-09-24 01:05:14.004] 512+0 records out [2025-09-24 01:05:14.020] Starting syslogd/klogd: done [2025-09-24 01:05:14.036] DML Start [2025-09-24 01:05:14.212] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:05:14.452] DML res1: 0 [2025-09-24 01:05:14.827] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:05:14.827] Read Success [2025-09-24 01:05:14.827] Verifying certificate... [2025-09-24 01:05:15.099] Verified OK [2025-09-24 01:05:15.114] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:05:16.758] Verified OK [2025-09-24 01:05:16.758] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:05:17.406] Verified OK [2025-09-24 01:05:17.406] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:05:19.980] fs.protected_hardlinks = 1 [2025-09-24 01:05:19.980] fs.protected_symlinks = 1 [2025-09-24 01:05:19.996] kernel.modules_disabled = 1 [2025-09-24 01:05:20.172] [2025-09-24 01:05:20.172] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:05:21.462] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:05:29.292] SBL1:1210.0.1.0 [2025-09-24 01:05:29.340] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:05:30.905] SBL2:1210.0.1.0 [2025-09-24 01:05:30.953] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 01:05:31.066] j-A [2025-09-24 01:05:38.405] The R5 Autosar Classic is running [2025-09-24 01:05:38.431] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:05:38.431] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:05:39.038] INIT: version 2.96 booting [2025-09-24 01:05:39.149] INIT: Entering runlevel: 5 [2025-09-24 01:05:39.310] mtd24 attached [2025-09-24 01:05:39.310] mtd28 attached [2025-09-24 01:05:39.326] mtd32 attached [2025-09-24 01:05:39.374] ubi0:textures is mounted. [2025-09-24 01:05:39.437] ubi1:animations is mounted. [2025-09-24 01:05:39.438] RTNETLINK answers: File exists [2025-09-24 01:05:39.438] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:05:39.438] ubi2:dml_code is mounted. [2025-09-24 01:05:39.438] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:05:39.438] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:05:39.438] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:05:39.438] data.LB_FadeInType0=100 [2025-09-24 01:05:39.438] data.CHLH_FadeInType0=0 [2025-09-24 01:05:39.438] data.WU_FadeInDelay=0 [2025-09-24 01:05:39.438] max_time_out=0 [2025-09-24 01:05:39.438] No splash screen [2025-09-24 01:05:39.438] stop dss Done [2025-09-24 01:05:39.438] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:05:39.479] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:05:39.479] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:05:39.511] /dev/mem opened. [2025-09-24 01:05:39.511] Memory mapped at address 0xffffb38bc000. [2025-09-24 01:05:39.511] Read at address 0x00600018 (0xffffb38bc018): 0x00000000 [2025-09-24 01:05:39.511] Write at address 0x00600018 (0xffffb38bc018): 0x00400040, readback 0x00400040 [2025-09-24 01:05:39.640] Loaded PowerVR consumer services. [2025-09-24 01:05:39.783] Waiting data available... [2025-09-24 01:05:39.815] 512+0 records in [2025-09-24 01:05:39.815] 512+0 records out [2025-09-24 01:05:39.847] Starting syslogd/klogd: done [2025-09-24 01:05:39.863] DML Start [2025-09-24 01:05:40.055] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:05:40.279] DML res1: 0 [2025-09-24 01:05:40.684] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:05:40.684] Read Success [2025-09-24 01:05:40.684] Verifying certificate... [2025-09-24 01:05:40.923] Verified OK [2025-09-24 01:05:40.939] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:05:42.682] Verified OK [2025-09-24 01:05:42.682] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:05:43.318] Verified OK [2025-09-24 01:05:43.318] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:05:45.844] fs.protected_hardlinks = 1 [2025-09-24 01:05:45.844] fs.protected_symlinks = 1 [2025-09-24 01:05:45.860] kernel.modules_disabled = 1 [2025-09-24 01:05:46.052] [2025-09-24 01:05:46.052] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:05:47.267] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:05:55.102] SBL1:1210.0.1.0 [2025-09-24 01:05:55.150] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:05:56.733] SBL2:1210.0.1.0 [2025-09-24 01:05:56.765] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:05:56.876] j-A [2025-09-24 01:06:04.248] The R5 Autosar Classic is running [2025-09-24 01:06:04.248] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:06:04.248] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:06:04.855] INIT: version 2.96 booting [2025-09-24 01:06:04.968] INIT: Entering runlevel: 5 [2025-09-24 01:06:05.112] mtd24 attached [2025-09-24 01:06:05.127] mtd32 attached [2025-09-24 01:06:05.143] mtd28 attached [2025-09-24 01:06:05.192] RTNETLINK answers: File exists [2025-09-24 01:06:05.256] ubi0:textures is mounted. [2025-09-24 01:06:05.256] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:06:05.256] ubi2:animations is mounted. [2025-09-24 01:06:05.256] ubi1:dml_code is mounted. [2025-09-24 01:06:05.256] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:06:05.256] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:06:05.256] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:06:05.256] data.LB_FadeInType0=100 [2025-09-24 01:06:05.256] data.CHLH_FadeInType0=0 [2025-09-24 01:06:05.256] data.WU_FadeInDelay=0 [2025-09-24 01:06:05.256] max_time_out=0 [2025-09-24 01:06:05.256] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:06:05.256] No splash screen [2025-09-24 01:06:05.256] stop dss Done [2025-09-24 01:06:05.289] /dev/mem opened. [2025-09-24 01:06:05.326] Memory mapped at address 0xffffa0250000. [2025-09-24 01:06:05.326] Read at address 0x00600018 (0xffffa0250018): 0x00000000 [2025-09-24 01:06:05.326] Write at address 0x00600018 (0xffffa0250018): 0x00400040, readback 0x00400040 [2025-09-24 01:06:05.326] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:06:05.326] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:06:05.582] Loaded PowerVR consumer services. [2025-09-24 01:06:05.614] Waiting data available... [2025-09-24 01:06:05.630] 512+0 records in [2025-09-24 01:06:05.646] 512+0 records out [2025-09-24 01:06:05.661] Starting syslogd/klogd: done [2025-09-24 01:06:05.677] DML Start [2025-09-24 01:06:05.854] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:06:06.093] DML res1: 0 [2025-09-24 01:06:06.468] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:06:06.468] Read Success [2025-09-24 01:06:06.468] Verifying certificate... [2025-09-24 01:06:06.724] Verified OK [2025-09-24 01:06:06.740] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:06:08.441] Verified OK [2025-09-24 01:06:08.441] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:06:09.081] Verified OK [2025-09-24 01:06:09.097] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:06:11.672] fs.protected_hardlinks = 1 [2025-09-24 01:06:11.687] fs.protected_symlinks = 1 [2025-09-24 01:06:11.687] kernel.modules_disabled = 1 [2025-09-24 01:06:11.896] [2025-09-24 01:06:11.896] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:06:13.126] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:06:20.915] SBL1:1210.0.1.0 [2025-09-24 01:06:20.963] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:06:22.530] SBL2:1210.0.1.0 [2025-09-24 01:06:22.578] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:06:22.690] j-A [2025-09-24 01:06:30.059] The R5 Autosar Classic is running [2025-09-24 01:06:30.059] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:06:30.059] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:06:30.667] INIT: version 2.96 booting [2025-09-24 01:06:30.779] INIT: Entering runlevel: 5 [2025-09-24 01:06:30.938] mtd24 attached [2025-09-24 01:06:30.938] mtd28 attached [2025-09-24 01:06:30.954] mtd32 attached [2025-09-24 01:06:30.986] ubi0:textures is mounted. [2025-09-24 01:06:31.002] RTNETLINK answers: File exists [2025-09-24 01:06:31.002] ubi1:animations is mounted. [2025-09-24 01:06:31.063] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:06:31.063] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:06:31.063] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:06:31.063] ubi2:dml_code is mounted. [2025-09-24 01:06:31.063] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:06:31.063] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:06:31.063] data.LB_FadeInType0=100 [2025-09-24 01:06:31.063] data.CHLH_FadeInType0=0 [2025-09-24 01:06:31.063] data.WU_FadeInDelay=0 [2025-09-24 01:06:31.063] max_time_out=0 [2025-09-24 01:06:31.063] No splash screen [2025-09-24 01:06:31.063] stop dss Done [2025-09-24 01:06:31.079] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:06:31.105] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:06:31.145] /dev/mem opened. [2025-09-24 01:06:31.145] Memory mapped at address 0xffff84f32000. [2025-09-24 01:06:31.145] Read at address 0x00600018 (0xffff84f32018): 0x00000000 [2025-09-24 01:06:31.145] Write at address 0x00600018 (0xffff84f32018): 0x00400040, readback 0x00400040 [2025-09-24 01:06:31.257] Loaded PowerVR consumer services. [2025-09-24 01:06:31.401] Waiting data available... [2025-09-24 01:06:31.434] 512+0 records in [2025-09-24 01:06:31.434] 512+0 records out [2025-09-24 01:06:31.465] Starting syslogd/klogd: done [2025-09-24 01:06:31.481] DML Start [2025-09-24 01:06:31.642] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:06:31.849] DML res1: 0 [2025-09-24 01:06:32.296] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:06:32.296] Read Success [2025-09-24 01:06:32.296] Verifying certificate... [2025-09-24 01:06:32.535] Verified OK [2025-09-24 01:06:32.551] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:06:34.007] Verified OK [2025-09-24 01:06:34.007] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:06:34.642] Verified OK [2025-09-24 01:06:34.642] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:06:37.440] fs.protected_hardlinks = 1 [2025-09-24 01:06:37.456] fs.protected_symlinks = 1 [2025-09-24 01:06:37.456] kernel.modules_disabled = 1 [2025-09-24 01:06:37.647] [2025-09-24 01:06:37.647] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:06:38.944] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:06:46.728] SBL1:1210.0.1.0 [2025-09-24 01:06:46.776] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:06:48.342] SBL2:1210.0.1.0 [2025-09-24 01:06:48.390] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:06:48.502] j-A [2025-09-24 01:06:55.872] The R5 Autosar Classic is running [2025-09-24 01:06:55.872] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:06:55.872] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:06:56.479] INIT: version 2.96 booting [2025-09-24 01:06:56.592] INIT: Entering runlevel: 5 [2025-09-24 01:06:56.751] mtd28 attached [2025-09-24 01:06:56.751] mtd32 attached [2025-09-24 01:06:56.767] mtd24 attached [2025-09-24 01:06:56.816] ubi0:animations is mounted. [2025-09-24 01:06:56.816] RTNETLINK answers: File exists [2025-09-24 01:06:56.875] ubi1:dml_code is mounted. [2025-09-24 01:06:56.875] ubi2:textures is mounted. [2025-09-24 01:06:56.875] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:06:56.875] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:06:56.875] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:06:56.875] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:06:56.875] data.LB_FadeInType0=100 [2025-09-24 01:06:56.875] data.CHLH_FadeInType0=0 [2025-09-24 01:06:56.875] data.WU_FadeInDelay=0 [2025-09-24 01:06:56.875] max_time_out=0 [2025-09-24 01:06:56.875] No splash screen [2025-09-24 01:06:56.875] stop dss Done [2025-09-24 01:06:56.875] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:06:56.932] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:06:56.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:06:56.965] /dev/mem opened. [2025-09-24 01:06:56.965] Memory mapped at address 0xffffb8a56000. [2025-09-24 01:06:56.965] Read at address 0x00600018 (0xffffb8a56018): 0x00000000 [2025-09-24 01:06:56.965] Write at address 0x00600018 (0xffffb8a56018): 0x00400040, readback 0x00400040 [2025-09-24 01:06:57.189] Loaded PowerVR consumer services. [2025-09-24 01:06:57.205] Waiting data available... [2025-09-24 01:06:57.237] 512+0 records in [2025-09-24 01:06:57.237] 512+0 records out [2025-09-24 01:06:57.285] Starting syslogd/klogd: done [2025-09-24 01:06:57.301] DML Start [2025-09-24 01:06:57.476] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:06:57.700] DML res1: 0 [2025-09-24 01:06:58.180] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:06:58.196] Read Success [2025-09-24 01:06:58.196] Verifying certificate... [2025-09-24 01:06:58.452] Verified OK [2025-09-24 01:06:58.484] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:07:00.115] Verified OK [2025-09-24 01:07:00.115] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:07:00.750] Verified OK [2025-09-24 01:07:00.750] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:07:03.341] fs.protected_hardlinks = 1 [2025-09-24 01:07:03.341] fs.protected_symlinks = 1 [2025-09-24 01:07:03.357] kernel.modules_disabled = 1 [2025-09-24 01:07:03.549] [2025-09-24 01:07:03.549] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:07:04.716] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:07:12.525] SBL1:1210.0.1.0 [2025-09-24 01:07:12.573] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:07:14.155] SBL2:1210.0.1.0 [2025-09-24 01:07:14.187] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:07:14.300] j-A [2025-09-24 01:07:21.672] The R5 Autosar Classic is running [2025-09-24 01:07:21.672] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:07:21.672] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:07:22.280] INIT: version 2.96 booting [2025-09-24 01:07:22.391] INIT: Entering runlevel: 5 [2025-09-24 01:07:22.535] mtd28 attached [2025-09-24 01:07:22.567] mtd24 attached [2025-09-24 01:07:22.567] mtd32 attached [2025-09-24 01:07:22.583] ubi0:animations is mounted. [2025-09-24 01:07:22.615] ubi1:dml_code is mounted. [2025-09-24 01:07:22.615] RTNETLINK answers: File exists [2025-09-24 01:07:22.670] ubi2:textures is mounted. [2025-09-24 01:07:22.670] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:07:22.670] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:07:22.670] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:07:22.670] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:07:22.670] data.LB_FadeInType0=100 [2025-09-24 01:07:22.670] data.CHLH_FadeInType0=0 [2025-09-24 01:07:22.670] data.WU_FadeInDelay=0 [2025-09-24 01:07:22.670] max_time_out=0 [2025-09-24 01:07:22.670] No splash screen [2025-09-24 01:07:22.670] stop dss Done [2025-09-24 01:07:22.670] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:07:22.721] /dev/mem opened. [2025-09-24 01:07:22.721] Memory mapped at address 0xffffb6827000. [2025-09-24 01:07:22.721] Read at address 0x00600018 (0xffffb6827018): 0x00000000 [2025-09-24 01:07:22.721] Write at address 0x00600018 (0xffffb6827018): 0x00400040, readback 0x00400040 [2025-09-24 01:07:22.737] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:07:22.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:07:22.865] Loaded PowerVR consumer services. [2025-09-24 01:07:23.009] Waiting data available... [2025-09-24 01:07:23.024] 512+0 records in [2025-09-24 01:07:23.040] 512+0 records out [2025-09-24 01:07:23.073] Starting syslogd/klogd: done [2025-09-24 01:07:23.089] DML Start [2025-09-24 01:07:23.249] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:07:23.504] DML res1: 0 [2025-09-24 01:07:23.978] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:07:23.978] Read Success [2025-09-24 01:07:23.978] Verifying certificate... [2025-09-24 01:07:24.265] Verified OK [2025-09-24 01:07:24.281] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:07:25.816] Verified OK [2025-09-24 01:07:25.816] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:07:26.466] Verified OK [2025-09-24 01:07:26.466] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:07:29.067] fs.protected_hardlinks = 1 [2025-09-24 01:07:29.067] fs.protected_symlinks = 1 [2025-09-24 01:07:29.067] kernel.modules_disabled = 1 [2025-09-24 01:07:29.259] [2025-09-24 01:07:29.259] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:07:30.529] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:07:38.373] SBL1:1210.0.1.0 [2025-09-24 01:07:38.421] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:07:39.988] SBL2:1210.0.1.0 [2025-09-24 01:07:40.036] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:07:40.132] j-A [2025-09-24 01:07:47.485] The R5 Autosar Classic is running [2025-09-24 01:07:47.510] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:07:47.510] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:07:48.117] INIT: version 2.96 booting [2025-09-24 01:07:48.230] INIT: Entering runlevel: 5 [2025-09-24 01:07:48.389] mtd24 attached [2025-09-24 01:07:48.405] mtd32 attached [2025-09-24 01:07:48.405] mtd28 attached [2025-09-24 01:07:48.496] ubi0:textures is mounted. [2025-09-24 01:07:48.496] ubi2:animations is mounted. [2025-09-24 01:07:48.496] RTNETLINK answers: File exists [2025-09-24 01:07:48.496] ubi1:dml_code is mounted. [2025-09-24 01:07:48.496] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:07:48.496] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:07:48.496] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:07:48.496] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:07:48.528] data.LB_FadeInType0=100 [2025-09-24 01:07:48.528] data.CHLH_FadeInType0=0 [2025-09-24 01:07:48.528] data.WU_FadeInDelay=0 [2025-09-24 01:07:48.528] max_time_out=0 [2025-09-24 01:07:48.528] No splash screen [2025-09-24 01:07:48.528] stop dss Done [2025-09-24 01:07:48.528] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:07:48.598] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:07:48.598] /dev/mem opened. [2025-09-24 01:07:48.598] Memory mapped at address 0xffffae4a9000. [2025-09-24 01:07:48.598] Read at address 0x00600018 (0xffffae4a9018): 0x00000000 [2025-09-24 01:07:48.598] Write at address 0x00600018 (0xffffae4a9018): 0x00400040, readback 0x00400040 [2025-09-24 01:07:48.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:07:48.854] Loaded PowerVR consumer services. [2025-09-24 01:07:48.870] Waiting data available... [2025-09-24 01:07:48.902] 512+0 records in [2025-09-24 01:07:48.902] 512+0 records out [2025-09-24 01:07:48.918] Starting syslogd/klogd: done [2025-09-24 01:07:48.950] DML Start [2025-09-24 01:07:49.094] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:07:49.350] DML res1: 0 [2025-09-24 01:07:49.771] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:07:49.771] Read Success [2025-09-24 01:07:49.771] Verifying certificate... [2025-09-24 01:07:50.027] Verified OK [2025-09-24 01:07:50.043] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:07:51.783] Verified OK [2025-09-24 01:07:51.783] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:07:52.423] Verified OK [2025-09-24 01:07:52.439] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:07:55.045] fs.protected_hardlinks = 1 [2025-09-24 01:07:55.045] fs.protected_symlinks = 1 [2025-09-24 01:07:55.061] kernel.modules_disabled = 1 [2025-09-24 01:07:55.237] [2025-09-24 01:07:55.237] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:07:56.382] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:08:04.187] SBL1:1210.0.1.0 [2025-09-24 01:08:04.219] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:08:05.802] SBL2:1210.0.1.0 [2025-09-24 01:08:05.834] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:08:05.946] j-A [2025-09-24 01:08:13.301] The R5 Autosar Classic is running [2025-09-24 01:08:13.301] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:08:13.321] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:08:13.929] INIT: version 2.96 booting [2025-09-24 01:08:14.041] INIT: Entering runlevel: 5 [2025-09-24 01:08:14.185] mtd28 attached [2025-09-24 01:08:14.201] mtd24 attached [2025-09-24 01:08:14.217] mtd32 attached [2025-09-24 01:08:14.249] ubi0:animations is mounted. [2025-09-24 01:08:14.265] RTNETLINK answers: File exists [2025-09-24 01:08:14.265] ubi1:textures is mounted. [2025-09-24 01:08:14.295] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:08:14.295] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:08:14.295] ubi2:dml_code is mounted. [2025-09-24 01:08:14.295] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:08:14.295] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:08:14.322] data.LB_FadeInType0=100 [2025-09-24 01:08:14.322] data.CHLH_FadeInType0=0 [2025-09-24 01:08:14.322] data.WU_FadeInDelay=0 [2025-09-24 01:08:14.322] max_time_out=0 [2025-09-24 01:08:14.322] No splash screen [2025-09-24 01:08:14.322] stop dss Done [2025-09-24 01:08:14.322] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:08:14.392] /dev/mem opened. [2025-09-24 01:08:14.392] Memory mapped at address 0xffffb06db000. [2025-09-24 01:08:14.392] Read at address 0x00600018 (0xffffb06db018): 0x00000000 [2025-09-24 01:08:14.392] Write at address 0x00600018 (0xffffb06db018): 0x00400040, readback 0x00400040 [2025-09-24 01:08:14.392] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:08:14.392] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:08:14.553] Loaded PowerVR consumer services. [2025-09-24 01:08:14.664] Waiting data available... [2025-09-24 01:08:14.696] 512+0 records in [2025-09-24 01:08:14.696] 512+0 records out [2025-09-24 01:08:14.744] Starting syslogd/klogd: done [2025-09-24 01:08:14.760] DML Start [2025-09-24 01:08:14.952] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:08:15.176] DML res1: 0 [2025-09-24 01:08:15.543] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:08:15.559] Read Success [2025-09-24 01:08:15.559] Verifying certificate... [2025-09-24 01:08:15.783] Verified OK [2025-09-24 01:08:15.799] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:08:17.458] Verified OK [2025-09-24 01:08:17.458] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:08:18.126] Verified OK [2025-09-24 01:08:18.126] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:08:20.776] fs.protected_hardlinks = 1 [2025-09-24 01:08:20.776] fs.protected_symlinks = 1 [2025-09-24 01:08:20.776] kernel.modules_disabled = 1 [2025-09-24 01:08:20.967] [2025-09-24 01:08:20.967] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:08:22.222] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:08:29.988] SBL1:1210.0.1.0 [2025-09-24 01:08:30.020] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:08:31.603] SBL2:1210.0.1.0 [2025-09-24 01:08:31.634] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:08:31.746] j-A [2025-09-24 01:08:39.122] The R5 Autosar Classic is running [2025-09-24 01:08:39.122] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:08:39.122] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:08:39.729] INIT: version 2.96 booting [2025-09-24 01:08:39.841] INIT: Entering runlevel: 5 [2025-09-24 01:08:40.001] mtd32 attached [2025-09-24 01:08:40.001] mtd28 attached [2025-09-24 01:08:40.017] mtd24 attached [2025-09-24 01:08:40.050] ubi0:dml_code is mounted. [2025-09-24 01:08:40.100] RTNETLINK answers: File exists [2025-09-24 01:08:40.100] ubi1:animations is mounted. [2025-09-24 01:08:40.100] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:08:40.100] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:08:40.100] ubi2:textures is mounted. [2025-09-24 01:08:40.100] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:08:40.100] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:08:40.100] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:08:40.126] data.LB_FadeInType0=100 [2025-09-24 01:08:40.126] data.CHLH_FadeInType0=0 [2025-09-24 01:08:40.126] data.WU_FadeInDelay=0 [2025-09-24 01:08:40.126] max_time_out=0 [2025-09-24 01:08:40.126] No splash screen [2025-09-24 01:08:40.126] stop dss Done [2025-09-24 01:08:40.153] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:08:40.153] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:08:40.207] /dev/mem opened. [2025-09-24 01:08:40.207] Memory mapped at address 0xffff9403e000. [2025-09-24 01:08:40.207] Read at address 0x00600018 (0xffff9403e018): 0x00000000 [2025-09-24 01:08:40.207] Write at address 0x00600018 (0xffff9403e018): 0x00400040, readback 0x00400040 [2025-09-24 01:08:40.351] Loaded PowerVR consumer services. [2025-09-24 01:08:40.463] Waiting data available... [2025-09-24 01:08:40.478] 512+0 records in [2025-09-24 01:08:40.478] 512+0 records out [2025-09-24 01:08:40.526] Starting syslogd/klogd: done [2025-09-24 01:08:40.542] DML Start [2025-09-24 01:08:40.687] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:08:40.911] DML res1: 0 [2025-09-24 01:08:41.454] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:08:41.454] Read Success [2025-09-24 01:08:41.470] Verifying certificate... [2025-09-24 01:08:41.709] Verified OK [2025-09-24 01:08:41.741] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:08:43.356] Verified OK [2025-09-24 01:08:43.356] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:08:43.976] Verified OK [2025-09-24 01:08:43.976] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:08:46.661] fs.protected_hardlinks = 1 [2025-09-24 01:08:46.677] fs.protected_symlinks = 1 [2025-09-24 01:08:46.677] kernel.modules_disabled = 1 [2025-09-24 01:08:46.869] [2025-09-24 01:08:46.869] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:08:47.969] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:08:55.803] SBL1:1210.0.1.0 [2025-09-24 01:08:55.851] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:08:57.418] SBL2:1210.0.1.0 [2025-09-24 01:08:57.466] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 01:08:57.561] j-A [2025-09-24 01:09:04.917] The R5 Autosar Classic is running [2025-09-24 01:09:04.917] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:09:04.938] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:09:05.546] INIT: version 2.96 booting [2025-09-24 01:09:05.658] INIT: Entering runlevel: 5 [2025-09-24 01:09:05.818] mtd24 attached [2025-09-24 01:09:05.834] ubi0:textures is mounted. [2025-09-24 01:09:05.850] mtd28 attached [2025-09-24 01:09:05.850] mtd32 attached [2025-09-24 01:09:05.882] ubi1:animations is mounted. [2025-09-24 01:09:05.882] RTNETLINK answers: File exists [2025-09-24 01:09:05.898] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:09:05.947] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:09:05.947] ubi2:dml_code is mounted. [2025-09-24 01:09:05.947] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:09:05.947] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:09:05.947] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:09:05.947] data.LB_FadeInType0=100 [2025-09-24 01:09:05.947] data.CHLH_FadeInType0=0 [2025-09-24 01:09:05.947] data.WU_FadeInDelay=0 [2025-09-24 01:09:05.947] max_time_out=0 [2025-09-24 01:09:05.947] No splash screen [2025-09-24 01:09:05.947] stop dss Done [2025-09-24 01:09:05.962] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:09:05.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:09:06.030] /dev/mem opened. [2025-09-24 01:09:06.030] Memory mapped at address 0xffffa9b5e000. [2025-09-24 01:09:06.030] Read at address 0x00600018 (0xffffa9b5e018): 0x00000000 [2025-09-24 01:09:06.030] Write at address 0x00600018 (0xffffa9b5e018): 0x00400040, readback 0x00400040 [2025-09-24 01:09:06.175] Loaded PowerVR consumer services. [2025-09-24 01:09:06.302] Waiting data available... [2025-09-24 01:09:06.318] 512+0 records in [2025-09-24 01:09:06.318] 512+0 records out [2025-09-24 01:09:06.367] Starting syslogd/klogd: done [2025-09-24 01:09:06.383] DML Start [2025-09-24 01:09:06.558] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:09:06.734] DML res1: 0 [2025-09-24 01:09:07.221] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:09:07.221] Read Success [2025-09-24 01:09:07.221] Verifying certificate... [2025-09-24 01:09:07.445] Verified OK [2025-09-24 01:09:07.461] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:09:09.124] Verified OK [2025-09-24 01:09:09.124] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:09:09.683] Verified OK [2025-09-24 01:09:09.683] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:09:12.145] fs.protected_hardlinks = 1 [2025-09-24 01:09:12.161] fs.protected_symlinks = 1 [2025-09-24 01:09:12.161] kernel.modules_disabled = 1 [2025-09-24 01:09:12.353] [2025-09-24 01:09:12.353] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:09:13.824] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:09:21.632] SBL1:1210.0.1.0 [2025-09-24 01:09:21.664] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:09:23.247] SBL2:1210.0.1.0 [2025-09-24 01:09:23.279] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:09:23.392] j-A [2025-09-24 01:09:30.764] The R5 Autosar Classic is running [2025-09-24 01:09:30.764] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:09:30.764] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:09:31.372] INIT: version 2.96 booting [2025-09-24 01:09:31.484] INIT: Entering runlevel: 5 [2025-09-24 01:09:31.644] mtd32 attached [2025-09-24 01:09:31.644] mtd24 attached [2025-09-24 01:09:31.660] mtd28 attached [2025-09-24 01:09:31.708] RTNETLINK answers: File exists [2025-09-24 01:09:31.769] ubi0:dml_code is mounted. [2025-09-24 01:09:31.769] ubi1:textures is mounted. [2025-09-24 01:09:31.769] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:09:31.769] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:09:31.769] ubi2:animations is mounted. [2025-09-24 01:09:31.769] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:09:31.769] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:09:31.769] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:09:31.769] data.LB_FadeInType0=100 [2025-09-24 01:09:31.769] data.CHLH_FadeInType0=0 [2025-09-24 01:09:31.769] data.WU_FadeInDelay=0 [2025-09-24 01:09:31.769] max_time_out=0 [2025-09-24 01:09:31.769] No splash screen [2025-09-24 01:09:31.769] stop dss Done [2025-09-24 01:09:31.801] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:09:31.817] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:09:31.850] /dev/mem opened. [2025-09-24 01:09:31.850] Memory mapped at address 0xffff91918000. [2025-09-24 01:09:31.850] Read at address 0x00600018 (0xffff91918018): 0x00000000 [2025-09-24 01:09:31.850] Write at address 0x00600018 (0xffff91918018): 0x00400040, readback 0x00400040 [2025-09-24 01:09:31.978] Loaded PowerVR consumer services. [2025-09-24 01:09:32.121] Waiting data available... [2025-09-24 01:09:32.153] 512+0 records in [2025-09-24 01:09:32.153] 512+0 records out [2025-09-24 01:09:32.201] Starting syslogd/klogd: done [2025-09-24 01:09:32.218] DML Start [2025-09-24 01:09:32.394] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:09:32.634] DML res1: 0 [2025-09-24 01:09:33.074] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:09:33.074] Read Success [2025-09-24 01:09:33.074] Verifying certificate... [2025-09-24 01:09:33.282] Verified OK [2025-09-24 01:09:33.298] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:09:34.938] Verified OK [2025-09-24 01:09:34.938] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:09:35.535] Verified OK [2025-09-24 01:09:35.535] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:09:38.061] fs.protected_hardlinks = 1 [2025-09-24 01:09:38.077] fs.protected_symlinks = 1 [2025-09-24 01:09:38.077] kernel.modules_disabled = 1 [2025-09-24 01:09:38.269] [2025-09-24 01:09:38.269] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:09:39.660] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:09:47.437] SBL1:1210.0.1.0 [2025-09-24 01:09:47.485] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:09:49.051] SBL2:1210.0.1.0 [2025-09-24 01:09:49.099] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:09:49.196] j-A [2025-09-24 01:09:56.551] The R5 Autosar Classic is running [2025-09-24 01:09:56.574] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:09:56.574] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:09:57.183] INIT: version 2.96 booting [2025-09-24 01:09:57.294] INIT: Entering runlevel: 5 [2025-09-24 01:09:57.454] mtd24 attached [2025-09-24 01:09:57.454] mtd28 attached [2025-09-24 01:09:57.471] mtd32 attached [2025-09-24 01:09:57.487] ubi0:textures is mounted. [2025-09-24 01:09:57.519] RTNETLINK answers: File exists [2025-09-24 01:09:57.579] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:09:57.579] ubi2:dml_code is mounted. [2025-09-24 01:09:57.579] ubi1:animations is mounted. [2025-09-24 01:09:57.579] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:09:57.579] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:09:57.579] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:09:57.579] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:09:57.579] data.LB_FadeInType0=100 [2025-09-24 01:09:57.579] data.CHLH_FadeInType0=0 [2025-09-24 01:09:57.579] data.WU_FadeInDelay=0 [2025-09-24 01:09:57.579] max_time_out=0 [2025-09-24 01:09:57.579] No splash screen [2025-09-24 01:09:57.579] stop dss Done [2025-09-24 01:09:57.643] /dev/mem opened. [2025-09-24 01:09:57.643] Memory mapped at address 0xffff8ef69000. [2025-09-24 01:09:57.643] Read at address 0x00600018 (0xffff8ef69018): 0x00000000 [2025-09-24 01:09:57.643] Write at address 0x00600018 (0xffff8ef69018): 0x00400040, readback 0x00400040 [2025-09-24 01:09:57.675] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:09:57.691] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:09:57.931] Waiting data available... [2025-09-24 01:09:57.963] Loaded PowerVR consumer services. [2025-09-24 01:09:57.979] 512+0 records in [2025-09-24 01:09:57.979] 512+0 records out [2025-09-24 01:09:57.995] Starting syslogd/klogd: done [2025-09-24 01:09:58.011] DML Start [2025-09-24 01:09:58.155] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:09:58.411] DML res1: 0 [2025-09-24 01:09:58.833] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:09:58.833] Read Success [2025-09-24 01:09:58.833] Verifying certificate... [2025-09-24 01:09:59.137] Verified OK [2025-09-24 01:09:59.153] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:10:00.798] Verified OK [2025-09-24 01:10:00.798] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:10:01.421] Verified OK [2025-09-24 01:10:01.421] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:10:04.108] fs.protected_hardlinks = 1 [2025-09-24 01:10:04.124] fs.protected_symlinks = 1 [2025-09-24 01:10:04.124] kernel.modules_disabled = 1 [2025-09-24 01:10:04.332] [2025-09-24 01:10:04.332] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:10:05.450] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:10:13.258] SBL1:1210.0.1.0 [2025-09-24 01:10:13.290] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:10:14.872] SBL2:1210.0.1.0 [2025-09-24 01:10:14.920] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 01:10:15.016] j-A [2025-09-24 01:10:22.371] The R5 Autosar Classic is running [2025-09-24 01:10:22.371] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:10:22.393] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:10:22.999] INIT: version 2.96 booting [2025-09-24 01:10:23.112] INIT: Entering runlevel: 5 [2025-09-24 01:10:23.256] mtd28 attached [2025-09-24 01:10:23.272] mtd32 attached [2025-09-24 01:10:23.287] mtd24 attached [2025-09-24 01:10:23.390] RTNETLINK answers: File exists [2025-09-24 01:10:23.390] ubi0:animations is mounted. [2025-09-24 01:10:23.390] ubi1:dml_code is mounted. [2025-09-24 01:10:23.390] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:10:23.390] ubi2:textures is mounted. [2025-09-24 01:10:23.390] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:10:23.390] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:10:23.390] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:10:23.390] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:10:23.390] data.LB_FadeInType0=100 [2025-09-24 01:10:23.390] data.CHLH_FadeInType0=0 [2025-09-24 01:10:23.390] data.WU_FadeInDelay=0 [2025-09-24 01:10:23.390] max_time_out=0 [2025-09-24 01:10:23.390] No splash screen [2025-09-24 01:10:23.390] stop dss Done [2025-09-24 01:10:23.471] /dev/mem opened. [2025-09-24 01:10:23.471] Memory mapped at address 0xffffaf336000. [2025-09-24 01:10:23.471] Read at address 0x00600018 (0xffffaf336018): 0x00000000 [2025-09-24 01:10:23.471] Write at address 0x00600018 (0xffffaf336018): 0x00400040, readback 0x00400040 [2025-09-24 01:10:23.501] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:10:23.501] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:10:23.581] Loaded PowerVR consumer services. [2025-09-24 01:10:23.741] Waiting data available... [2025-09-24 01:10:23.757] 512+0 records in [2025-09-24 01:10:23.757] 512+0 records out [2025-09-24 01:10:23.804] Starting syslogd/klogd: done [2025-09-24 01:10:23.821] DML Start [2025-09-24 01:10:24.044] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:10:24.252] DML res1: 0 [2025-09-24 01:10:24.629] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:10:24.629] Read Success [2025-09-24 01:10:24.629] Verifying certificate... [2025-09-24 01:10:24.869] Verified OK [2025-09-24 01:10:24.885] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:10:26.606] Verified OK [2025-09-24 01:10:26.606] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:10:27.182] Verified OK [2025-09-24 01:10:27.182] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:10:29.805] fs.protected_hardlinks = 1 [2025-09-24 01:10:29.805] fs.protected_symlinks = 1 [2025-09-24 01:10:29.820] kernel.modules_disabled = 1 [2025-09-24 01:10:30.012] [2025-09-24 01:10:30.012] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:10:31.323] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:10:39.077] SBL1:1210.0.1.0 [2025-09-24 01:10:39.125] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:10:40.707] SBL2:1210.0.1.0 [2025-09-24 01:10:40.740] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:10:40.852] j-A [2025-09-24 01:10:48.224] The R5 Autosar Classic is running [2025-09-24 01:10:48.224] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:10:48.224] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:10:48.832] INIT: version 2.96 booting [2025-09-24 01:10:48.944] INIT: Entering runlevel: 5 [2025-09-24 01:10:49.104] mtd28 attached [2025-09-24 01:10:49.104] mtd24 attached [2025-09-24 01:10:49.136] mtd32 attached [2025-09-24 01:10:49.152] ubi0:animations is mounted. [2025-09-24 01:10:49.168] ubi1:textures is mounted. [2025-09-24 01:10:49.168] RTNETLINK answers: File exists [2025-09-24 01:10:49.225] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:10:49.225] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:10:49.225] ubi2:dml_code is mounted. [2025-09-24 01:10:49.225] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:10:49.225] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:10:49.225] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:10:49.225] data.LB_FadeInType0=100 [2025-09-24 01:10:49.225] data.CHLH_FadeInType0=0 [2025-09-24 01:10:49.225] data.WU_FadeInDelay=0 [2025-09-24 01:10:49.225] max_time_out=0 [2025-09-24 01:10:49.225] No splash screen [2025-09-24 01:10:49.225] stop dss Done [2025-09-24 01:10:49.267] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:10:49.267] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:10:49.283] /dev/mem opened. [2025-09-24 01:10:49.283] Memory mapped at address 0xffff93416000. [2025-09-24 01:10:49.283] Read at address 0x00600018 (0xffff93416018): 0x00000000 [2025-09-24 01:10:49.308] Write at address 0x00600018 (0xffff93416018): 0x00400040, readback 0x00400040 [2025-09-24 01:10:49.580] Loaded PowerVR consumer services. [2025-09-24 01:10:49.628] Waiting data available... [2025-09-24 01:10:49.644] 512+0 records in [2025-09-24 01:10:49.644] 512+0 records out [2025-09-24 01:10:49.676] Starting syslogd/klogd: done [2025-09-24 01:10:49.692] DML Start [2025-09-24 01:10:49.819] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:10:50.012] DML res1: 0 [2025-09-24 01:10:50.577] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:10:50.577] Read Success [2025-09-24 01:10:50.577] Verifying certificate... [2025-09-24 01:10:50.800] Verified OK [2025-09-24 01:10:50.816] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:10:52.539] Verified OK [2025-09-24 01:10:52.539] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:10:53.051] Verified OK [2025-09-24 01:10:53.051] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:10:55.561] fs.protected_hardlinks = 1 [2025-09-24 01:10:55.561] fs.protected_symlinks = 1 [2025-09-24 01:10:55.577] kernel.modules_disabled = 1 [2025-09-24 01:10:55.769] [2025-09-24 01:10:55.769] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:10:57.087] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:11:04.921] SBL1:1210.0.1.0 [2025-09-24 01:11:04.969] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:11:06.537] SBL2:1210.0.1.0 [2025-09-24 01:11:06.584] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:11:06.696] j-A [2025-09-24 01:11:14.033] The R5 Autosar Classic is running [2025-09-24 01:11:14.064] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:11:14.064] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:11:14.672] INIT: version 2.96 booting [2025-09-24 01:11:14.784] INIT: Entering runlevel: 5 [2025-09-24 01:11:14.944] mtd24 attached [2025-09-24 01:11:14.944] mtd32 attached [2025-09-24 01:11:14.960] mtd28 attached [2025-09-24 01:11:15.008] ubi0:textures is mounted. [2025-09-24 01:11:15.008] RTNETLINK answers: File exists [2025-09-24 01:11:15.046] ubi2:animations is mounted. [2025-09-24 01:11:15.046] ubi1:dml_code is mounted. [2025-09-24 01:11:15.046] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:11:15.046] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:11:15.046] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:11:15.072] data.LB_FadeInType0=100 [2025-09-24 01:11:15.072] data.CHLH_FadeInType0=0 [2025-09-24 01:11:15.072] data.WU_FadeInDelay=0 [2025-09-24 01:11:15.072] max_time_out=0 [2025-09-24 01:11:15.072] No splash screen [2025-09-24 01:11:15.072] stop dss Done [2025-09-24 01:11:15.072] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:11:15.088] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:11:15.152] /dev/mem opened. [2025-09-24 01:11:15.152] Memory mapped at address 0xffffb0101000. [2025-09-24 01:11:15.152] Read at address 0x00600018 (0xffffb0101018): 0x00000000 [2025-09-24 01:11:15.152] Write at address 0x00600018 (0xffffb0101018): 0x00400040, readback 0x00400040 [2025-09-24 01:11:15.180] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:11:15.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:11:15.228] Loaded PowerVR consumer services. [2025-09-24 01:11:15.404] Waiting data available... [2025-09-24 01:11:15.420] 512+0 records in [2025-09-24 01:11:15.420] 512+0 records out [2025-09-24 01:11:15.468] Starting syslogd/klogd: done [2025-09-24 01:11:15.484] DML Start [2025-09-24 01:11:15.675] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:11:15.852] DML res1: 0 [2025-09-24 01:11:16.372] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:11:16.372] Read Success [2025-09-24 01:11:16.372] Verifying certificate... [2025-09-24 01:11:16.643] Verified OK [2025-09-24 01:11:16.676] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:11:18.384] Verified OK [2025-09-24 01:11:18.384] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:11:18.923] Verified OK [2025-09-24 01:11:18.923] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:11:21.386] fs.protected_hardlinks = 1 [2025-09-24 01:11:21.386] fs.protected_symlinks = 1 [2025-09-24 01:11:21.402] kernel.modules_disabled = 1 [2025-09-24 01:11:21.594] [2025-09-24 01:11:21.594] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:11:22.905] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:11:30.764] SBL1:1210.0.1.0 [2025-09-24 01:11:30.812] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:11:32.379] SBL2:1210.0.1.0 [2025-09-24 01:11:32.426] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:11:32.539] j-A [2025-09-24 01:11:39.876] The R5 Autosar Classic is running [2025-09-24 01:11:39.900] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:11:39.900] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:11:40.508] INIT: version 2.96 booting [2025-09-24 01:11:40.620] INIT: Entering runlevel: 5 [2025-09-24 01:11:40.780] mtd24 attached [2025-09-24 01:11:40.780] mtd28 attached [2025-09-24 01:11:40.796] mtd32 attached [2025-09-24 01:11:40.844] RTNETLINK answers: File exists [2025-09-24 01:11:40.889] ubi0:textures is mounted. [2025-09-24 01:11:40.889] ubi1:animations is mounted. [2025-09-24 01:11:40.889] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:11:40.889] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:11:40.889] ubi2:dml_code is mounted. [2025-09-24 01:11:40.889] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:11:40.889] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:11:40.889] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:11:40.911] data.LB_FadeInType0=100 [2025-09-24 01:11:40.911] data.CHLH_FadeInType0=0 [2025-09-24 01:11:40.911] data.WU_FadeInDelay=0 [2025-09-24 01:11:40.911] max_time_out=0 [2025-09-24 01:11:40.911] No splash screen [2025-09-24 01:11:40.911] stop dss Done [2025-09-24 01:11:40.943] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:11:40.943] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:11:40.959] /dev/mem opened. [2025-09-24 01:11:40.991] Memory mapped at address 0xffffaa742000. [2025-09-24 01:11:40.991] Read at address 0x00600018 (0xffffaa742018): 0x00000000 [2025-09-24 01:11:40.991] Write at address 0x00600018 (0xffffaa742018): 0x00400040, readback 0x00400040 [2025-09-24 01:11:41.134] Loaded PowerVR consumer services. [2025-09-24 01:11:41.262] Waiting data available... [2025-09-24 01:11:41.295] 512+0 records in [2025-09-24 01:11:41.295] 512+0 records out [2025-09-24 01:11:41.343] Starting syslogd/klogd: done [2025-09-24 01:11:41.343] DML Start [2025-09-24 01:11:41.566] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:11:41.758] DML res1: 0 [2025-09-24 01:11:42.234] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:11:42.234] Read Success [2025-09-24 01:11:42.234] Verifying certificate... [2025-09-24 01:11:42.474] Verified OK [2025-09-24 01:11:42.506] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:11:44.245] Verified OK [2025-09-24 01:11:44.245] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:11:44.773] Verified OK [2025-09-24 01:11:44.789] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:11:47.252] fs.protected_hardlinks = 1 [2025-09-24 01:11:47.252] fs.protected_symlinks = 1 [2025-09-24 01:11:47.267] kernel.modules_disabled = 1 [2025-09-24 01:11:47.459] [2025-09-24 01:11:47.459] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:11:48.770] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:11:56.585] SBL1:1210.0.1.0 [2025-09-24 01:11:56.633] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:11:58.199] SBL2:1210.0.1.0 [2025-09-24 01:11:58.248] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:11:58.360] j-A [2025-09-24 01:12:05.731] The R5 Autosar Classic is running [2025-09-24 01:12:05.731] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:12:05.731] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:12:06.338] INIT: version 2.96 booting [2025-09-24 01:12:06.450] INIT: Entering runlevel: 5 [2025-09-24 01:12:06.610] mtd24 attached [2025-09-24 01:12:06.626] mtd28 attached [2025-09-24 01:12:06.642] mtd32 attached [2025-09-24 01:12:06.674] ubi0:textures is mounted. [2025-09-24 01:12:06.690] RTNETLINK answers: File exists [2025-09-24 01:12:06.690] ubi2:dml_code is mounted. [2025-09-24 01:12:06.723] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:12:06.723] ubi1:animations is mounted. [2025-09-24 01:12:06.723] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:12:06.723] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:12:06.723] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:12:06.723] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:12:06.723] data.LB_FadeInType0=100 [2025-09-24 01:12:06.744] data.CHLH_FadeInType0=0 [2025-09-24 01:12:06.744] data.WU_FadeInDelay=0 [2025-09-24 01:12:06.744] max_time_out=0 [2025-09-24 01:12:06.744] No splash screen [2025-09-24 01:12:06.744] stop dss Done [2025-09-24 01:12:06.776] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:12:06.817] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:12:06.817] /dev/mem opened. [2025-09-24 01:12:06.817] Memory mapped at address 0xffff82373000. [2025-09-24 01:12:06.817] Read at address 0x00600018 (0xffff82373018): 0x00000000 [2025-09-24 01:12:06.817] Write at address 0x00600018 (0xffff82373018): 0x00400040, readback 0x00400040 [2025-09-24 01:12:06.976] Loaded PowerVR consumer services. [2025-09-24 01:12:07.105] Waiting data available... [2025-09-24 01:12:07.121] 512+0 records in [2025-09-24 01:12:07.121] 512+0 records out [2025-09-24 01:12:07.168] Starting syslogd/klogd: done [2025-09-24 01:12:07.184] DML Start [2025-09-24 01:12:07.328] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:12:07.584] DML res1: 0 [2025-09-24 01:12:07.979] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:12:07.980] Read Success [2025-09-24 01:12:07.980] Verifying certificate... [2025-09-24 01:12:08.219] Verified OK [2025-09-24 01:12:08.235] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:12:09.865] Verified OK [2025-09-24 01:12:09.882] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:12:10.454] Verified OK [2025-09-24 01:12:10.454] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:12:13.204] fs.protected_hardlinks = 1 [2025-09-24 01:12:13.204] fs.protected_symlinks = 1 [2025-09-24 01:12:13.220] kernel.modules_disabled = 1 [2025-09-24 01:12:13.412] [2025-09-24 01:12:13.412] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:12:14.645] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:12:22.419] SBL1:1210.0.1.0 [2025-09-24 01:12:22.467] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:12:24.034] SBL2:1210.0.1.0 [2025-09-24 01:12:24.082] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:12:24.178] j-A [2025-09-24 01:12:31.532] The R5 Autosar Classic is running [2025-09-24 01:12:31.557] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:12:31.557] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:12:32.165] INIT: version 2.96 booting [2025-09-24 01:12:32.276] INIT: Entering runlevel: 5 [2025-09-24 01:12:32.436] mtd24 attached [2025-09-24 01:12:32.436] mtd28 attached [2025-09-24 01:12:32.452] mtd32 attached [2025-09-24 01:12:32.500] ubi1:animations is mounted. [2025-09-24 01:12:32.500] RTNETLINK answers: File exists [2025-09-24 01:12:32.567] ubi0:textures is mounted. [2025-09-24 01:12:32.567] ubi2:dml_code is mounted. [2025-09-24 01:12:32.567] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:12:32.567] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:12:32.567] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:12:32.567] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:12:32.567] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:12:32.567] data.LB_FadeInType0=100 [2025-09-24 01:12:32.567] data.CHLH_FadeInType0=0 [2025-09-24 01:12:32.567] data.WU_FadeInDelay=0 [2025-09-24 01:12:32.567] max_time_out=0 [2025-09-24 01:12:32.567] No splash screen [2025-09-24 01:12:32.567] stop dss Done [2025-09-24 01:12:32.645] /dev/mem opened. [2025-09-24 01:12:32.645] Memory mapped at address 0xffff9c6e5000. [2025-09-24 01:12:32.645] Read at address 0x00600018 (0xffff9c6e5018): 0x00000000 [2025-09-24 01:12:32.645] Write at address 0x00600018 (0xffff9c6e5018): 0x00400040, readback 0x00400040 [2025-09-24 01:12:32.645] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:12:32.645] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:12:32.772] Loaded PowerVR consumer services. [2025-09-24 01:12:32.916] Waiting data available... [2025-09-24 01:12:32.932] 512+0 records in [2025-09-24 01:12:32.932] 512+0 records out [2025-09-24 01:12:32.980] Starting syslogd/klogd: done [2025-09-24 01:12:32.996] DML Start [2025-09-24 01:12:33.172] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:12:33.412] DML res1: 0 [2025-09-24 01:12:33.812] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:12:33.833] Read Success [2025-09-24 01:12:33.833] Verifying certificate... [2025-09-24 01:12:34.104] Verified OK [2025-09-24 01:12:34.120] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:12:35.887] Verified OK [2025-09-24 01:12:35.887] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:12:36.334] Verified OK [2025-09-24 01:12:36.334] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:12:38.732] fs.protected_hardlinks = 1 [2025-09-24 01:12:38.748] fs.protected_symlinks = 1 [2025-09-24 01:12:38.748] kernel.modules_disabled = 1 [2025-09-24 01:12:38.940] [2025-09-24 01:12:38.940] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:12:40.464] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:12:48.243] SBL1:1210.0.1.0 [2025-09-24 01:12:48.291] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:12:49.858] SBL2:1210.0.1.0 [2025-09-24 01:12:49.906] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:12:50.018] j-A [2025-09-24 01:12:57.389] The R5 Autosar Classic is running [2025-09-24 01:12:57.389] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:12:57.389] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:12:57.996] INIT: version 2.96 booting [2025-09-24 01:12:58.108] INIT: Entering runlevel: 5 [2025-09-24 01:12:58.268] mtd28 attached [2025-09-24 01:12:58.268] mtd24 attached [2025-09-24 01:12:58.284] mtd32 attached [2025-09-24 01:12:58.331] ubi0:animations is mounted. [2025-09-24 01:12:58.331] RTNETLINK answers: File exists [2025-09-24 01:12:58.389] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:12:58.389] ubi1:textures is mounted. [2025-09-24 01:12:58.389] ubi2:dml_code is mounted. [2025-09-24 01:12:58.389] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:12:58.389] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:12:58.389] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:12:58.389] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:12:58.389] data.LB_FadeInType0=100 [2025-09-24 01:12:58.389] data.CHLH_FadeInType0=0 [2025-09-24 01:12:58.389] data.WU_FadeInDelay=0 [2025-09-24 01:12:58.389] max_time_out=0 [2025-09-24 01:12:58.389] No splash screen [2025-09-24 01:12:58.389] stop dss Done [2025-09-24 01:12:58.469] /dev/mem opened. [2025-09-24 01:12:58.469] Memory mapped at address 0xffff8303b000. [2025-09-24 01:12:58.469] Read at address 0x00600018 (0xffff8303b018): 0x00000000 [2025-09-24 01:12:58.469] Write at address 0x00600018 (0xffff8303b018): 0x00400040, readback 0x00400040 [2025-09-24 01:12:58.469] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:12:58.469] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:12:58.581] Loaded PowerVR consumer services. [2025-09-24 01:12:58.740] Waiting data available... [2025-09-24 01:12:58.773] 512+0 records in [2025-09-24 01:12:58.773] 512+0 records out [2025-09-24 01:12:58.821] Starting syslogd/klogd: done [2025-09-24 01:12:58.837] DML Start [2025-09-24 01:12:58.981] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:12:59.172] DML res1: 0 [2025-09-24 01:12:59.679] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:12:59.679] Read Success [2025-09-24 01:12:59.679] Verifying certificate... [2025-09-24 01:12:59.886] Verified OK [2025-09-24 01:12:59.902] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:13:01.469] Verified OK [2025-09-24 01:13:01.485] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:13:02.154] Verified OK [2025-09-24 01:13:02.154] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:13:04.809] fs.protected_hardlinks = 1 [2025-09-24 01:13:04.824] fs.protected_symlinks = 1 [2025-09-24 01:13:04.824] kernel.modules_disabled = 1 [2025-09-24 01:13:05.016] [2025-09-24 01:13:05.016] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:13:06.246] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:13:14.061] SBL1:1210.0.1.0 [2025-09-24 01:13:14.108] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:13:15.675] SBL2:1210.0.1.0 [2025-09-24 01:13:15.723] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:13:15.836] j-A [2025-09-24 01:13:23.175] The R5 Autosar Classic is running [2025-09-24 01:13:23.206] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:13:23.206] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:13:23.814] INIT: version 2.96 booting [2025-09-24 01:13:23.925] INIT: Entering runlevel: 5 [2025-09-24 01:13:24.069] mtd24 attached [2025-09-24 01:13:24.085] mtd32 attached [2025-09-24 01:13:24.101] mtd28 attached [2025-09-24 01:13:24.133] ubi0:textures is mounted. [2025-09-24 01:13:24.182] RTNETLINK answers: File exists [2025-09-24 01:13:24.182] ubi1:dml_code is mounted. [2025-09-24 01:13:24.182] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:13:24.182] ubi2:animations is mounted. [2025-09-24 01:13:24.182] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:13:24.182] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:13:24.182] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:13:24.182] data.LB_FadeInType0=100 [2025-09-24 01:13:24.208] data.CHLH_FadeInType0=0 [2025-09-24 01:13:24.208] data.WU_FadeInDelay=0 [2025-09-24 01:13:24.208] max_time_out=0 [2025-09-24 01:13:24.208] No splash screen [2025-09-24 01:13:24.208] stop dss Done [2025-09-24 01:13:24.208] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:13:24.279] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:13:24.279] /dev/mem opened. [2025-09-24 01:13:24.279] Memory mapped at address 0xffff87d4a000. [2025-09-24 01:13:24.279] Read at address 0x00600018 (0xffff87d4a018): 0x00000000 [2025-09-24 01:13:24.279] Write at address 0x00600018 (0xffff87d4a018): 0x00400040, readback 0x00400040 [2025-09-24 01:13:24.279] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:13:24.375] Loaded PowerVR consumer services. [2025-09-24 01:13:24.551] Waiting data available... [2025-09-24 01:13:24.567] 512+0 records in [2025-09-24 01:13:24.567] 512+0 records out [2025-09-24 01:13:24.615] Starting syslogd/klogd: done [2025-09-24 01:13:24.631] DML Start [2025-09-24 01:13:24.807] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:13:25.014] DML res1: 0 [2025-09-24 01:13:25.479] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:13:25.495] Read Success [2025-09-24 01:13:25.495] Verifying certificate... [2025-09-24 01:13:25.718] Verified OK [2025-09-24 01:13:25.734] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:13:27.487] Verified OK [2025-09-24 01:13:27.487] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:13:28.031] Verified OK [2025-09-24 01:13:28.053] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:13:30.578] fs.protected_hardlinks = 1 [2025-09-24 01:13:30.593] fs.protected_symlinks = 1 [2025-09-24 01:13:30.593] kernel.modules_disabled = 1 [2025-09-24 01:13:30.786] [2025-09-24 01:13:30.786] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:13:32.038] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:13:39.894] SBL1:1210.0.1.0 [2025-09-24 01:13:39.926] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:13:41.508] SBL2:1210.0.1.0 [2025-09-24 01:13:41.556] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:13:41.652] j-A [2025-09-24 01:13:49.008] The R5 Autosar Classic is running [2025-09-24 01:13:49.008] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:13:49.028] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:13:49.637] INIT: version 2.96 booting [2025-09-24 01:13:49.748] INIT: Entering runlevel: 5 [2025-09-24 01:13:49.893] mtd32 attached [2025-09-24 01:13:49.909] mtd28 attached [2025-09-24 01:13:49.924] mtd24 attached [2025-09-24 01:13:49.957] ubi0:dml_code is mounted. [2025-09-24 01:13:49.973] RTNETLINK answers: File exists [2025-09-24 01:13:49.973] ubi2:textures is mounted. [2025-09-24 01:13:50.005] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:13:50.005] ubi1:animations is mounted. [2025-09-24 01:13:50.005] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:13:50.005] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:13:50.005] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:13:50.005] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:13:50.031] data.LB_FadeInType0=100 [2025-09-24 01:13:50.031] data.CHLH_FadeInType0=0 [2025-09-24 01:13:50.031] data.WU_FadeInDelay=0 [2025-09-24 01:13:50.031] max_time_out=0 [2025-09-24 01:13:50.031] No splash screen [2025-09-24 01:13:50.031] stop dss Done [2025-09-24 01:13:50.046] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:13:50.069] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:13:50.108] /dev/mem opened. [2025-09-24 01:13:50.108] Memory mapped at address 0xffff8b04d000. [2025-09-24 01:13:50.108] Read at address 0x00600018 (0xffff8b04d018): 0x00000000 [2025-09-24 01:13:50.108] Write at address 0x00600018 (0xffff8b04d018): 0x00400040, readback 0x00400040 [2025-09-24 01:13:50.188] Loaded PowerVR consumer services. [2025-09-24 01:13:50.380] Waiting data available... [2025-09-24 01:13:50.412] 512+0 records in [2025-09-24 01:13:50.412] 512+0 records out [2025-09-24 01:13:50.460] Starting syslogd/klogd: done [2025-09-24 01:13:50.476] DML Start [2025-09-24 01:13:50.620] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:13:50.827] DML res1: 0 [2025-09-24 01:13:51.313] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:13:51.313] Read Success [2025-09-24 01:13:51.313] Verifying certificate... [2025-09-24 01:13:51.538] Verified OK [2025-09-24 01:13:51.554] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:13:53.245] Verified OK [2025-09-24 01:13:53.245] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:13:53.843] Verified OK [2025-09-24 01:13:53.843] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:13:56.480] fs.protected_hardlinks = 1 [2025-09-24 01:13:56.496] fs.protected_symlinks = 1 [2025-09-24 01:13:56.496] kernel.modules_disabled = 1 [2025-09-24 01:13:56.703] [2025-09-24 01:13:56.703] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:13:57.913] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:14:05.710] SBL1:1210.0.1.0 [2025-09-24 01:14:05.758] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:14:07.326] SBL2:1210.0.1.0 [2025-09-24 01:14:07.373] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:14:07.485] j-A [2025-09-24 01:14:14.856] The R5 Autosar Classic is running [2025-09-24 01:14:14.856] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:14:14.856] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:14:15.463] INIT: version 2.96 booting [2025-09-24 01:14:15.576] INIT: Entering runlevel: 5 [2025-09-24 01:14:15.735] mtd28 attached [2025-09-24 01:14:15.735] mtd24 attached [2025-09-24 01:14:15.751] mtd32 attached [2025-09-24 01:14:15.855] RTNETLINK answers: File exists [2025-09-24 01:14:15.855] ubi0:animations is mounted. [2025-09-24 01:14:15.855] ubi1:textures is mounted. [2025-09-24 01:14:15.855] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:14:15.855] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:14:15.855] ubi2:dml_code is mounted. [2025-09-24 01:14:15.855] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:14:15.855] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:14:15.855] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:14:15.855] data.LB_FadeInType0=100 [2025-09-24 01:14:15.855] data.CHLH_FadeInType0=0 [2025-09-24 01:14:15.855] data.WU_FadeInDelay=0 [2025-09-24 01:14:15.855] max_time_out=0 [2025-09-24 01:14:15.855] No splash screen [2025-09-24 01:14:15.855] stop dss Done [2025-09-24 01:14:15.870] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:14:15.893] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:14:15.928] /dev/mem opened. [2025-09-24 01:14:15.928] Memory mapped at address 0xffffa0f06000. [2025-09-24 01:14:15.928] Read at address 0x00600018 (0xffffa0f06018): 0x00000000 [2025-09-24 01:14:15.928] Write at address 0x00600018 (0xffffa0f06018): 0x00400040, readback 0x00400040 [2025-09-24 01:14:16.024] Loaded PowerVR consumer services. [2025-09-24 01:14:16.200] Waiting data available... [2025-09-24 01:14:16.216] 512+0 records in [2025-09-24 01:14:16.216] 512+0 records out [2025-09-24 01:14:16.264] Starting syslogd/klogd: done [2025-09-24 01:14:16.280] DML Start [2025-09-24 01:14:16.456] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:14:16.695] DML res1: 0 [2025-09-24 01:14:17.157] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:14:17.157] Read Success [2025-09-24 01:14:17.157] Verifying certificate... [2025-09-24 01:14:17.397] Verified OK [2025-09-24 01:14:17.413] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:14:19.139] Verified OK [2025-09-24 01:14:19.139] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:14:19.708] Verified OK [2025-09-24 01:14:19.708] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:14:22.186] fs.protected_hardlinks = 1 [2025-09-24 01:14:22.202] fs.protected_symlinks = 1 [2025-09-24 01:14:22.219] kernel.modules_disabled = 1 [2025-09-24 01:14:22.410] [2025-09-24 01:14:22.410] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:14:23.736] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:14:31.559] SBL1:1210.0.1.0 [2025-09-24 01:14:31.591] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:14:33.174] SBL2:1210.0.1.0 [2025-09-24 01:14:33.205] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:14:33.318] j-A [2025-09-24 01:14:40.693] The R5 Autosar Classic is running [2025-09-24 01:14:40.693] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:14:40.693] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:14:41.302] INIT: version 2.96 booting [2025-09-24 01:14:41.413] INIT: Entering runlevel: 5 [2025-09-24 01:14:41.557] mtd24 attached [2025-09-24 01:14:41.589] mtd32 attached [2025-09-24 01:14:41.589] mtd28 attached [2025-09-24 01:14:41.605] ubi0:textures is mounted. [2025-09-24 01:14:41.637] RTNETLINK answers: File exists [2025-09-24 01:14:41.637] ubi1:dml_code is mounted. [2025-09-24 01:14:41.692] ubi2:animations is mounted. [2025-09-24 01:14:41.692] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:14:41.692] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:14:41.692] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:14:41.692] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:14:41.692] data.LB_FadeInType0=100 [2025-09-24 01:14:41.692] data.CHLH_FadeInType0=0 [2025-09-24 01:14:41.692] data.WU_FadeInDelay=0 [2025-09-24 01:14:41.692] max_time_out=0 [2025-09-24 01:14:41.692] No splash screen [2025-09-24 01:14:41.692] stop dss Done [2025-09-24 01:14:41.692] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:14:41.761] /dev/mem opened. [2025-09-24 01:14:41.761] Memory mapped at address 0xffff96ad2000. [2025-09-24 01:14:41.761] Read at address 0x00600018 (0xffff96ad2018): 0x00000000 [2025-09-24 01:14:41.761] Write at address 0x00600018 (0xffff96ad2018): 0x00400040, readback 0x00400040 [2025-09-24 01:14:41.761] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:14:41.777] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:14:41.889] Loaded PowerVR consumer services. [2025-09-24 01:14:42.049] Waiting data available... [2025-09-24 01:14:42.080] 512+0 records in [2025-09-24 01:14:42.080] 512+0 records out [2025-09-24 01:14:42.128] Starting syslogd/klogd: done [2025-09-24 01:14:42.145] DML Start [2025-09-24 01:14:42.321] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:14:42.593] DML res1: 0 [2025-09-24 01:14:42.943] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:14:42.943] Read Success [2025-09-24 01:14:42.943] Verifying certificate... [2025-09-24 01:14:43.135] Verified OK [2025-09-24 01:14:43.151] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:14:44.782] Verified OK [2025-09-24 01:14:44.803] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:14:45.427] Verified OK [2025-09-24 01:14:45.427] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:14:48.001] fs.protected_hardlinks = 1 [2025-09-24 01:14:48.001] fs.protected_symlinks = 1 [2025-09-24 01:14:48.017] kernel.modules_disabled = 1 [2025-09-24 01:14:48.209] [2025-09-24 01:14:48.209] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:14:49.592] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:14:57.373] SBL1:1210.0.1.0 [2025-09-24 01:14:57.405] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:14:58.988] SBL2:1210.0.1.0 [2025-09-24 01:14:59.019] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:14:59.131] j-A [2025-09-24 01:15:06.485] The R5 Autosar Classic is running [2025-09-24 01:15:06.485] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:15:06.506] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:15:07.114] INIT: version 2.96 booting [2025-09-24 01:15:07.225] INIT: Entering runlevel: 5 [2025-09-24 01:15:07.370] mtd28 attached [2025-09-24 01:15:07.386] mtd24 attached [2025-09-24 01:15:07.386] mtd32 attached [2025-09-24 01:15:07.434] RTNETLINK answers: File exists [2025-09-24 01:15:07.481] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:15:07.481] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:15:07.481] ubi1:textures is mounted. [2025-09-24 01:15:07.481] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:15:07.481] ubi0:animations is mounted. [2025-09-24 01:15:07.481] ubi2:dml_code is mounted. [2025-09-24 01:15:07.481] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:15:07.481] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:15:07.511] data.LB_FadeInType0=100 [2025-09-24 01:15:07.511] data.CHLH_FadeInType0=0 [2025-09-24 01:15:07.511] data.WU_FadeInDelay=0 [2025-09-24 01:15:07.511] max_time_out=0 [2025-09-24 01:15:07.511] No splash screen [2025-09-24 01:15:07.511] stop dss Done [2025-09-24 01:15:07.537] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:15:07.537] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:15:07.586] /dev/mem opened. [2025-09-24 01:15:07.586] Memory mapped at address 0xffffa8f5b000. [2025-09-24 01:15:07.586] Read at address 0x00600018 (0xffffa8f5b018): 0x00000000 [2025-09-24 01:15:07.586] Write at address 0x00600018 (0xffffa8f5b018): 0x00400040, readback 0x00400040 [2025-09-24 01:15:07.811] Loaded PowerVR consumer services. [2025-09-24 01:15:07.842] Waiting data available... [2025-09-24 01:15:07.874] 512+0 records in [2025-09-24 01:15:07.874] 512+0 records out [2025-09-24 01:15:07.922] Starting syslogd/klogd: done [2025-09-24 01:15:07.938] DML Start [2025-09-24 01:15:08.082] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:15:08.306] DML res1: 0 [2025-09-24 01:15:08.800] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:15:08.800] Read Success [2025-09-24 01:15:08.800] Verifying certificate... [2025-09-24 01:15:09.039] Verified OK [2025-09-24 01:15:09.055] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:15:10.606] Verified OK [2025-09-24 01:15:10.627] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:15:11.220] Verified OK [2025-09-24 01:15:11.220] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:15:13.875] fs.protected_hardlinks = 1 [2025-09-24 01:15:13.890] fs.protected_symlinks = 1 [2025-09-24 01:15:13.890] kernel.modules_disabled = 1 [2025-09-24 01:15:14.082] [2025-09-24 01:15:14.082] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:15:15.374] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:15:23.173] SBL1:1210.0.1.0 [2025-09-24 01:15:23.221] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:15:24.788] SBL2:1210.0.1.0 [2025-09-24 01:15:24.836] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:15:24.948] j-A [2025-09-24 01:15:32.320] The R5 Autosar Classic is running [2025-09-24 01:15:32.320] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:15:32.320] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:15:32.927] INIT: version 2.96 booting [2025-09-24 01:15:33.039] INIT: Entering runlevel: 5 [2025-09-24 01:15:33.199] mtd32 attached [2025-09-24 01:15:33.199] mtd28 attached [2025-09-24 01:15:33.215] mtd24 attached [2025-09-24 01:15:33.263] RTNETLINK answers: File exists [2025-09-24 01:15:33.308] ubi0:dml_code is mounted. [2025-09-24 01:15:33.308] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:15:33.308] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:15:33.308] ubi1:animations is mounted. [2025-09-24 01:15:33.308] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:15:33.308] ubi2:textures is mounted. [2025-09-24 01:15:33.308] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:15:33.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:15:33.356] data.LB_FadeInType0=100 [2025-09-24 01:15:33.356] data.CHLH_FadeInType0=0 [2025-09-24 01:15:33.356] data.WU_FadeInDelay=0 [2025-09-24 01:15:33.356] max_time_out=0 [2025-09-24 01:15:33.356] No splash screen [2025-09-24 01:15:33.356] stop dss Done [2025-09-24 01:15:33.356] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:15:33.356] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:15:33.410] /dev/mem opened. [2025-09-24 01:15:33.410] Memory mapped at address 0xffffb5fed000. [2025-09-24 01:15:33.410] Read at address 0x00600018 (0xffffb5fed018): 0x00000000 [2025-09-24 01:15:33.410] Write at address 0x00600018 (0xffffb5fed018): 0x00400040, readback 0x00400040 [2025-09-24 01:15:33.680] Waiting data available... [2025-09-24 01:15:33.680] Loaded PowerVR consumer services. [2025-09-24 01:15:33.712] 512+0 records in [2025-09-24 01:15:33.712] 512+0 records out [2025-09-24 01:15:33.743] Starting syslogd/klogd: done [2025-09-24 01:15:33.759] DML Start [2025-09-24 01:15:33.936] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:15:34.176] DML res1: 0 [2025-09-24 01:15:34.591] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:15:34.612] Read Success [2025-09-24 01:15:34.612] Verifying certificate... [2025-09-24 01:15:34.836] Verified OK [2025-09-24 01:15:34.852] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:15:36.551] Verified OK [2025-09-24 01:15:36.551] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:15:37.112] Verified OK [2025-09-24 01:15:37.112] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:15:39.670] fs.protected_hardlinks = 1 [2025-09-24 01:15:39.686] fs.protected_symlinks = 1 [2025-09-24 01:15:39.702] kernel.modules_disabled = 1 [2025-09-24 01:15:39.894] [2025-09-24 01:15:39.894] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:15:41.198] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:15:48.995] SBL1:1210.0.1.0 [2025-09-24 01:15:49.026] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:15:50.609] SBL2:1210.0.1.0 [2025-09-24 01:15:50.641] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:15:50.753] j-A [2025-09-24 01:15:58.106] The R5 Autosar Classic is running [2025-09-24 01:15:58.127] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:15:58.127] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:15:58.735] INIT: version 2.96 booting [2025-09-24 01:15:58.847] INIT: Entering runlevel: 5 [2025-09-24 01:15:59.006] mtd28 attached [2025-09-24 01:15:59.022] mtd32 attached [2025-09-24 01:15:59.022] mtd24 attached [2025-09-24 01:15:59.070] ubi0:animations is mounted. [2025-09-24 01:15:59.070] RTNETLINK answers: File exists [2025-09-24 01:15:59.114] ubi2:textures is mounted. [2025-09-24 01:15:59.114] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:15:59.114] ubi1:dml_code is mounted. [2025-09-24 01:15:59.114] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:15:59.114] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:15:59.114] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:15:59.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:15:59.140] data.LB_FadeInType0=100 [2025-09-24 01:15:59.140] data.CHLH_FadeInType0=0 [2025-09-24 01:15:59.140] data.WU_FadeInDelay=0 [2025-09-24 01:15:59.140] max_time_out=0 [2025-09-24 01:15:59.140] No splash screen [2025-09-24 01:15:59.140] stop dss Done [2025-09-24 01:15:59.204] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:15:59.204] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:15:59.204] /dev/mem opened. [2025-09-24 01:15:59.204] Memory mapped at address 0xffff88680000. [2025-09-24 01:15:59.204] Read at address 0x00600018 (0xffff88680018): 0x00000000 [2025-09-24 01:15:59.204] Write at address 0x00600018 (0xffff88680018): 0x00400040, readback 0x00400040 [2025-09-24 01:15:59.348] Loaded PowerVR consumer services. [2025-09-24 01:15:59.491] Waiting data available... [2025-09-24 01:15:59.507] 512+0 records in [2025-09-24 01:15:59.507] 512+0 records out [2025-09-24 01:15:59.555] Starting syslogd/klogd: done [2025-09-24 01:15:59.571] DML Start [2025-09-24 01:15:59.747] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:15:59.955] DML res1: 0 [2025-09-24 01:16:00.409] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:16:00.409] Read Success [2025-09-24 01:16:00.409] Verifying certificate... [2025-09-24 01:16:00.665] Verified OK [2025-09-24 01:16:00.681] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:16:02.328] Verified OK [2025-09-24 01:16:02.328] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:16:02.966] Verified OK [2025-09-24 01:16:02.982] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:16:05.621] fs.protected_hardlinks = 1 [2025-09-24 01:16:05.637] fs.protected_symlinks = 1 [2025-09-24 01:16:05.637] kernel.modules_disabled = 1 [2025-09-24 01:16:05.829] [2025-09-24 01:16:05.829] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:16:07.002] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:16:14.811] SBL1:1210.0.1.0 [2025-09-24 01:16:14.859] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:16:16.425] SBL2:1210.0.1.0 [2025-09-24 01:16:16.473] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:16:16.585] j-A [2025-09-24 01:16:23.956] The R5 Autosar Classic is running [2025-09-24 01:16:23.956] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:16:23.956] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:16:24.563] INIT: version 2.96 booting [2025-09-24 01:16:24.660] INIT: Entering runlevel: 5 [2025-09-24 01:16:24.819] mtd32 attached [2025-09-24 01:16:24.835] mtd24 attached [2025-09-24 01:16:24.851] mtd28 attached [2025-09-24 01:16:24.884] ubi0:dml_code is mounted. [2025-09-24 01:16:24.899] RTNETLINK answers: File exists [2025-09-24 01:16:24.953] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:16:24.953] ubi1:textures is mounted. [2025-09-24 01:16:24.953] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:16:24.953] ubi2:animations is mounted. [2025-09-24 01:16:24.953] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:16:24.953] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:16:24.953] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:16:24.953] data.LB_FadeInType0=100 [2025-09-24 01:16:24.953] data.CHLH_FadeInType0=0 [2025-09-24 01:16:24.953] data.WU_FadeInDelay=0 [2025-09-24 01:16:24.953] max_time_out=0 [2025-09-24 01:16:24.953] No splash screen [2025-09-24 01:16:24.953] stop dss Done [2025-09-24 01:16:25.001] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:16:25.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:16:25.042] /dev/mem opened. [2025-09-24 01:16:25.042] Memory mapped at address 0xffffbb30f000. [2025-09-24 01:16:25.042] Read at address 0x00600018 (0xffffbb30f018): 0x00000000 [2025-09-24 01:16:25.042] Write at address 0x00600018 (0xffffbb30f018): 0x00400040, readback 0x00400040 [2025-09-24 01:16:25.314] Loaded PowerVR consumer services. [2025-09-24 01:16:25.330] Waiting data available... [2025-09-24 01:16:25.362] 512+0 records in [2025-09-24 01:16:25.362] 512+0 records out [2025-09-24 01:16:25.394] Starting syslogd/klogd: done [2025-09-24 01:16:25.394] DML Start [2025-09-24 01:16:25.586] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:16:25.810] DML res1: 0 [2025-09-24 01:16:26.241] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:16:26.257] Read Success [2025-09-24 01:16:26.257] Verifying certificate... [2025-09-24 01:16:26.497] Verified OK [2025-09-24 01:16:26.513] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:16:28.043] Verified OK [2025-09-24 01:16:28.043] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:16:28.682] Verified OK [2025-09-24 01:16:28.682] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:16:31.336] fs.protected_hardlinks = 1 [2025-09-24 01:16:31.336] fs.protected_symlinks = 1 [2025-09-24 01:16:31.352] kernel.modules_disabled = 1 [2025-09-24 01:16:31.544] [2025-09-24 01:16:31.544] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:16:32.817] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:16:40.627] SBL1:1210.0.1.0 [2025-09-24 01:16:40.675] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:16:42.241] SBL2:1210.0.1.0 [2025-09-24 01:16:42.289] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:16:42.401] j-A [2025-09-24 01:16:49.772] The R5 Autosar Classic is running [2025-09-24 01:16:49.772] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:16:49.772] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:16:50.380] INIT: version 2.96 booting [2025-09-24 01:16:50.476] INIT: Entering runlevel: 5 [2025-09-24 01:16:50.636] mtd28 attached [2025-09-24 01:16:50.652] mtd24 attached [2025-09-24 01:16:50.652] mtd32 attached [2025-09-24 01:16:50.700] RTNETLINK answers: File exists [2025-09-24 01:16:50.752] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:16:50.752] ubi0:animations is mounted. [2025-09-24 01:16:50.752] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:16:50.752] ubi2:dml_code is mounted. [2025-09-24 01:16:50.752] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:16:50.752] ubi1:textures is mounted. [2025-09-24 01:16:50.752] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:16:50.752] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:16:50.752] data.LB_FadeInType0=100 [2025-09-24 01:16:50.773] data.CHLH_FadeInType0=0 [2025-09-24 01:16:50.773] data.WU_FadeInDelay=0 [2025-09-24 01:16:50.773] max_time_out=0 [2025-09-24 01:16:50.773] No splash screen [2025-09-24 01:16:50.773] stop dss Done [2025-09-24 01:16:50.852] /dev/mem opened. [2025-09-24 01:16:50.852] Memory mapped at address 0xffff90593000. [2025-09-24 01:16:50.852] Read at address 0x00600018 (0xffff90593018): 0x00000000 [2025-09-24 01:16:50.852] Write at address 0x00600018 (0xffff90593018): 0x00400040, readback 0x00400040 [2025-09-24 01:16:50.852] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:16:50.852] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:16:51.060] Loaded PowerVR consumer services. [2025-09-24 01:16:51.140] Waiting data available... [2025-09-24 01:16:51.156] 512+0 records in [2025-09-24 01:16:51.172] 512+0 records out [2025-09-24 01:16:51.187] Starting syslogd/klogd: done [2025-09-24 01:16:51.203] DML Start [2025-09-24 01:16:51.348] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:16:51.524] DML res1: 0 [2025-09-24 01:16:52.099] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:16:52.119] Read Success [2025-09-24 01:16:52.119] Verifying certificate... [2025-09-24 01:16:52.344] Verified OK [2025-09-24 01:16:52.360] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:16:53.926] Verified OK [2025-09-24 01:16:53.926] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:16:54.549] Verified OK [2025-09-24 01:16:54.549] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:16:57.108] fs.protected_hardlinks = 1 [2025-09-24 01:16:57.108] fs.protected_symlinks = 1 [2025-09-24 01:16:57.123] kernel.modules_disabled = 1 [2025-09-24 01:16:57.314] [2025-09-24 01:16:57.314] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:16:58.647] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:17:06.439] SBL1:1210.0.1.0 [2025-09-24 01:17:06.487] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:17:08.053] SBL2:1210.0.1.0 [2025-09-24 01:17:08.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:17:08.213] j-A [2025-09-24 01:17:15.586] The R5 Autosar Classic is running [2025-09-24 01:17:15.586] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:17:15.586] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:17:16.193] INIT: version 2.96 booting [2025-09-24 01:17:16.305] INIT: Entering runlevel: 5 [2025-09-24 01:17:16.449] mtd24 attached [2025-09-24 01:17:16.465] mtd28 attached [2025-09-24 01:17:16.481] mtd32 attached [2025-09-24 01:17:16.497] ubi0:textures is mounted. [2025-09-24 01:17:16.513] ubi1:animations is mounted. [2025-09-24 01:17:16.529] RTNETLINK answers: File exists [2025-09-24 01:17:16.529] ubi2:dml_code is mounted. [2025-09-24 01:17:16.580] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:17:16.580] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:17:16.580] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:17:16.580] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:17:16.580] data.LB_FadeInType0=100 [2025-09-24 01:17:16.580] data.CHLH_FadeInType0=0 [2025-09-24 01:17:16.580] data.WU_FadeInDelay=0 [2025-09-24 01:17:16.580] max_time_out=0 [2025-09-24 01:17:16.580] No splash screen [2025-09-24 01:17:16.580] stop dss Done [2025-09-24 01:17:16.580] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:17:16.659] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:17:16.659] /dev/mem opened. [2025-09-24 01:17:16.659] Memory mapped at address 0xffffb261a000. [2025-09-24 01:17:16.659] Read at address 0x00600018 (0xffffb261a018): 0x00000000 [2025-09-24 01:17:16.659] Write at address 0x00600018 (0xffffb261a018): 0x00400040, readback 0x00400040 [2025-09-24 01:17:16.659] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:17:16.899] Loaded PowerVR consumer services. [2025-09-24 01:17:16.931] Waiting data available... [2025-09-24 01:17:16.962] 512+0 records in [2025-09-24 01:17:16.962] 512+0 records out [2025-09-24 01:17:16.994] Starting syslogd/klogd: done [2025-09-24 01:17:17.027] DML Start [2025-09-24 01:17:17.170] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:17:17.346] DML res1: 0 [2025-09-24 01:17:17.858] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:17:17.874] Read Success [2025-09-24 01:17:17.874] Verifying certificate... [2025-09-24 01:17:18.146] Verified OK [2025-09-24 01:17:18.162] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:17:19.854] Verified OK [2025-09-24 01:17:19.854] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:17:20.419] Verified OK [2025-09-24 01:17:20.419] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:17:22.913] fs.protected_hardlinks = 1 [2025-09-24 01:17:22.913] fs.protected_symlinks = 1 [2025-09-24 01:17:22.929] kernel.modules_disabled = 1 [2025-09-24 01:17:23.137] [2025-09-24 01:17:23.137] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:17:24.436] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:17:32.253] SBL1:1210.0.1.0 [2025-09-24 01:17:32.301] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:17:33.868] SBL2:1210.0.1.0 [2025-09-24 01:17:33.916] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:17:34.028] j-A [2025-09-24 01:17:41.401] The R5 Autosar Classic is running [2025-09-24 01:17:41.401] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:17:41.401] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:17:42.008] INIT: version 2.96 booting [2025-09-24 01:17:42.104] INIT: Entering runlevel: 5 [2025-09-24 01:17:42.264] mtd24 attached [2025-09-24 01:17:42.280] mtd28 attached [2025-09-24 01:17:42.296] mtd32 attached [2025-09-24 01:17:42.328] ubi0:textures is mounted. [2025-09-24 01:17:42.377] RTNETLINK answers: File exists [2025-09-24 01:17:42.377] ubi1:animations is mounted. [2025-09-24 01:17:42.377] ubi2:dml_code is mounted. [2025-09-24 01:17:42.377] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:17:42.377] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:17:42.377] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:17:42.377] data.LB_FadeInType0=100 [2025-09-24 01:17:42.377] data.CHLH_FadeInType0=0 [2025-09-24 01:17:42.403] data.WU_FadeInDelay=0 [2025-09-24 01:17:42.403] max_time_out=0 [2025-09-24 01:17:42.403] No splash screen [2025-09-24 01:17:42.403] stop dss Done [2025-09-24 01:17:42.403] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:17:42.403] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:17:42.451] /dev/mem opened. [2025-09-24 01:17:42.451] Memory mapped at address 0xffff8f6f2000. [2025-09-24 01:17:42.488] Read at address 0x00600018 (0xffff8f6f2018): 0x00000000 [2025-09-24 01:17:42.488] Write at address 0x00600018 (0xffff8f6f2018): 0x00400040, readback 0x00400040 [2025-09-24 01:17:42.488] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:17:42.488] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:17:42.648] Loaded PowerVR consumer services. [2025-09-24 01:17:42.776] Waiting data available... [2025-09-24 01:17:42.792] 512+0 records in [2025-09-24 01:17:42.792] 512+0 records out [2025-09-24 01:17:42.823] Starting syslogd/klogd: done [2025-09-24 01:17:42.839] DML Start [2025-09-24 01:17:43.016] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:17:43.255] DML res1: 0 [2025-09-24 01:17:43.652] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:17:43.652] Read Success [2025-09-24 01:17:43.652] Verifying certificate... [2025-09-24 01:17:43.860] Verified OK [2025-09-24 01:17:43.876] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:17:45.513] Verified OK [2025-09-24 01:17:45.513] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:17:46.098] Verified OK [2025-09-24 01:17:46.098] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:17:48.768] fs.protected_hardlinks = 1 [2025-09-24 01:17:48.784] fs.protected_symlinks = 1 [2025-09-24 01:17:48.784] kernel.modules_disabled = 1 [2025-09-24 01:17:48.975] [2025-09-24 01:17:48.975] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:17:50.277] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:17:58.069] SBL1:1210.0.1.0 [2025-09-24 01:17:58.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:17:59.684] SBL2:1210.0.1.0 [2025-09-24 01:17:59.715] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:17:59.828] j-A [2025-09-24 01:18:07.202] The R5 Autosar Classic is running [2025-09-24 01:18:07.202] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:18:07.202] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:18:07.808] INIT: version 2.96 booting [2025-09-24 01:18:07.905] INIT: Entering runlevel: 5 [2025-09-24 01:18:08.064] mtd24 attached [2025-09-24 01:18:08.080] mtd28 attached [2025-09-24 01:18:08.080] mtd32 attached [2025-09-24 01:18:08.144] ubi0:textures is mounted. [2025-09-24 01:18:08.144] RTNETLINK answers: File exists [2025-09-24 01:18:08.201] ubi1:animations is mounted. [2025-09-24 01:18:08.201] ubi2:dml_code is mounted. [2025-09-24 01:18:08.201] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:18:08.201] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:18:08.201] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:18:08.201] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:18:08.201] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:18:08.201] data.LB_FadeInType0=100 [2025-09-24 01:18:08.201] data.CHLH_FadeInType0=0 [2025-09-24 01:18:08.201] data.WU_FadeInDelay=0 [2025-09-24 01:18:08.201] max_time_out=0 [2025-09-24 01:18:08.201] No splash screen [2025-09-24 01:18:08.201] stop dss Done [2025-09-24 01:18:08.249] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:18:08.249] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:18:08.289] /dev/mem opened. [2025-09-24 01:18:08.289] Memory mapped at address 0xffffb5872000. [2025-09-24 01:18:08.289] Read at address 0x00600018 (0xffffb5872018): 0x00000000 [2025-09-24 01:18:08.289] Write at address 0x00600018 (0xffffb5872018): 0x00400040, readback 0x00400040 [2025-09-24 01:18:08.368] Loaded PowerVR consumer services. [2025-09-24 01:18:08.545] Waiting data available... [2025-09-24 01:18:08.560] 512+0 records in [2025-09-24 01:18:08.560] 512+0 records out [2025-09-24 01:18:08.592] Starting syslogd/klogd: done [2025-09-24 01:18:08.608] DML Start [2025-09-24 01:18:08.816] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:18:09.056] DML res1: 0 [2025-09-24 01:18:09.483] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:18:09.483] Read Success [2025-09-24 01:18:09.483] Verifying certificate... [2025-09-24 01:18:09.739] Verified OK [2025-09-24 01:18:09.755] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:18:11.346] Verified OK [2025-09-24 01:18:11.346] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:18:12.011] Verified OK [2025-09-24 01:18:12.011] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:18:14.569] fs.protected_hardlinks = 1 [2025-09-24 01:18:14.569] fs.protected_symlinks = 1 [2025-09-24 01:18:14.585] kernel.modules_disabled = 1 [2025-09-24 01:18:14.777] [2025-09-24 01:18:14.777] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:18:16.081] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:18:23.879] SBL1:1210.0.1.0 [2025-09-24 01:18:23.911] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:18:25.493] SBL2:1210.0.1.0 [2025-09-24 01:18:25.525] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:18:25.638] j-A [2025-09-24 01:18:33.012] The R5 Autosar Classic is running [2025-09-24 01:18:33.012] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:18:33.012] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:18:33.619] INIT: version 2.96 booting [2025-09-24 01:18:33.732] INIT: Entering runlevel: 5 [2025-09-24 01:18:33.891] mtd32 attached [2025-09-24 01:18:33.891] mtd24 attached [2025-09-24 01:18:33.908] mtd28 attached [2025-09-24 01:18:33.969] ubi0:dml_code is mounted. [2025-09-24 01:18:33.969] ubi1:textures is mounted. [2025-09-24 01:18:33.969] RTNETLINK answers: File exists [2025-09-24 01:18:33.969] ubi2:animations is mounted. [2025-09-24 01:18:34.018] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:18:34.018] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:18:34.018] data.LB_FadeInType0=100 [2025-09-24 01:18:34.018] data.CHLH_FadeInType0=0 [2025-09-24 01:18:34.018] data.WU_FadeInDelay=0 [2025-09-24 01:18:34.018] max_time_out=0 [2025-09-24 01:18:34.018] No splash screen [2025-09-24 01:18:34.018] stop dss Done [2025-09-24 01:18:34.018] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:18:34.018] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:18:34.018] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:18:34.082] /dev/mem opened. [2025-09-24 01:18:34.082] Memory mapped at address 0xffff86db6000. [2025-09-24 01:18:34.082] Read at address 0x00600018 (0xffff86db6018): 0x00000000 [2025-09-24 01:18:34.082] Write at address 0x00600018 (0xffff86db6018): 0x00400040, readback 0x00400040 [2025-09-24 01:18:34.159] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:18:34.159] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:18:34.223] Loaded PowerVR consumer services. [2025-09-24 01:18:34.350] Waiting data available... [2025-09-24 01:18:34.366] 512+0 records in [2025-09-24 01:18:34.382] 512+0 records out [2025-09-24 01:18:34.431] Starting syslogd/klogd: done [2025-09-24 01:18:34.447] DML Start [2025-09-24 01:18:34.574] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:18:34.782] DML res1: 0 [2025-09-24 01:18:35.350] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:18:35.350] Read Success [2025-09-24 01:18:35.350] Verifying certificate... [2025-09-24 01:18:35.574] Verified OK [2025-09-24 01:18:35.606] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:18:37.190] Verified OK [2025-09-24 01:18:37.190] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:18:37.844] Verified OK [2025-09-24 01:18:37.844] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:18:40.531] fs.protected_hardlinks = 1 [2025-09-24 01:18:40.531] fs.protected_symlinks = 1 [2025-09-24 01:18:40.547] kernel.modules_disabled = 1 [2025-09-24 01:18:40.722] [2025-09-24 01:18:40.738] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:18:41.876] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:18:49.675] SBL1:1210.0.1.0 [2025-09-24 01:18:49.707] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:18:51.289] SBL2:1210.0.1.0 [2025-09-24 01:18:51.337] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:18:51.433] j-A [2025-09-24 01:18:58.788] The R5 Autosar Classic is running [2025-09-24 01:18:58.811] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:18:58.811] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:18:59.419] INIT: version 2.96 booting [2025-09-24 01:18:59.531] INIT: Entering runlevel: 5 [2025-09-24 01:18:59.691] mtd24 attached [2025-09-24 01:18:59.691] mtd28 attached [2025-09-24 01:18:59.723] mtd32 attached [2025-09-24 01:18:59.739] ubi0:textures is mounted. [2025-09-24 01:18:59.755] RTNETLINK answers: File exists [2025-09-24 01:18:59.783] ubi1:animations is mounted. [2025-09-24 01:18:59.783] ubi2:dml_code is mounted. [2025-09-24 01:18:59.783] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:18:59.820] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:18:59.820] data.LB_FadeInType0=100 [2025-09-24 01:18:59.820] data.CHLH_FadeInType0=0 [2025-09-24 01:18:59.820] data.WU_FadeInDelay=0 [2025-09-24 01:18:59.820] max_time_out=0 [2025-09-24 01:18:59.820] No splash screen [2025-09-24 01:18:59.820] stop dss Done [2025-09-24 01:18:59.820] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:18:59.820] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:18:59.820] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:18:59.890] /dev/mem opened. [2025-09-24 01:18:59.890] Memory mapped at address 0xffffba389000. [2025-09-24 01:18:59.890] Read at address 0x00600018 (0xffffba389018): 0x00000000 [2025-09-24 01:18:59.890] Write at address 0x00600018 (0xffffba389018): 0x00400040, readback 0x00400040 [2025-09-24 01:18:59.923] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:18:59.955] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:19:00.019] Loaded PowerVR consumer services. [2025-09-24 01:19:00.179] Waiting data available... [2025-09-24 01:19:00.210] 512+0 records in [2025-09-24 01:19:00.210] 512+0 records out [2025-09-24 01:19:00.258] Starting syslogd/klogd: done [2025-09-24 01:19:00.274] DML Start [2025-09-24 01:19:00.467] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:19:00.691] DML res1: 0 [2025-09-24 01:19:01.106] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:19:01.106] Read Success [2025-09-24 01:19:01.122] Verifying certificate... [2025-09-24 01:19:01.362] Verified OK [2025-09-24 01:19:01.378] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:19:02.990] Verified OK [2025-09-24 01:19:02.990] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:19:03.597] Verified OK [2025-09-24 01:19:03.612] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:19:06.219] fs.protected_hardlinks = 1 [2025-09-24 01:19:06.235] fs.protected_symlinks = 1 [2025-09-24 01:19:06.235] kernel.modules_disabled = 1 [2025-09-24 01:19:06.443] [2025-09-24 01:19:06.443] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:19:07.717] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:19:15.476] SBL1:1210.0.1.0 [2025-09-24 01:19:15.524] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:19:17.091] SBL2:1210.0.1.0 [2025-09-24 01:19:17.138] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:19:17.251] j-A [2025-09-24 01:19:24.588] The R5 Autosar Classic is running [2025-09-24 01:19:24.613] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:19:24.613] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:19:25.222] INIT: version 2.96 booting [2025-09-24 01:19:25.333] INIT: Entering runlevel: 5 [2025-09-24 01:19:25.494] mtd28 attached [2025-09-24 01:19:25.510] mtd32 attached [2025-09-24 01:19:25.510] mtd24 attached [2025-09-24 01:19:25.526] ubi0:animations is mounted. [2025-09-24 01:19:25.557] RTNETLINK answers: File exists [2025-09-24 01:19:25.624] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:19:25.624] ubi2:textures is mounted. [2025-09-24 01:19:25.624] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:19:25.624] ubi1:dml_code is mounted. [2025-09-24 01:19:25.624] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:19:25.624] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:19:25.624] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:19:25.624] data.LB_FadeInType0=100 [2025-09-24 01:19:25.624] data.CHLH_FadeInType0=0 [2025-09-24 01:19:25.624] data.WU_FadeInDelay=0 [2025-09-24 01:19:25.624] max_time_out=0 [2025-09-24 01:19:25.624] No splash screen [2025-09-24 01:19:25.624] stop dss Done [2025-09-24 01:19:25.703] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:19:25.703] /dev/mem opened. [2025-09-24 01:19:25.703] Memory mapped at address 0xffff8b633000. [2025-09-24 01:19:25.703] Read at address 0x00600018 (0xffff8b633018): 0x00000000 [2025-09-24 01:19:25.703] Write at address 0x00600018 (0xffff8b633018): 0x00400040, readback 0x00400040 [2025-09-24 01:19:25.703] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:19:25.847] Loaded PowerVR consumer services. [2025-09-24 01:19:25.991] Waiting data available... [2025-09-24 01:19:26.023] 512+0 records in [2025-09-24 01:19:26.023] 512+0 records out [2025-09-24 01:19:26.055] Starting syslogd/klogd: done [2025-09-24 01:19:26.055] DML Start [2025-09-24 01:19:26.247] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:19:26.486] DML res1: 0 [2025-09-24 01:19:26.839] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:19:26.839] Read Success [2025-09-24 01:19:26.854] Verifying certificate... [2025-09-24 01:19:27.159] Verified OK [2025-09-24 01:19:27.174] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:19:28.720] Verified OK [2025-09-24 01:19:28.720] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:19:29.327] Verified OK [2025-09-24 01:19:29.327] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:19:32.125] fs.protected_hardlinks = 1 [2025-09-24 01:19:32.141] fs.protected_symlinks = 1 [2025-09-24 01:19:32.158] kernel.modules_disabled = 1 [2025-09-24 01:19:32.349] [2025-09-24 01:19:32.349] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:19:33.523] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:19:41.301] SBL1:1210.0.1.0 [2025-09-24 01:19:41.349] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:19:42.916] SBL2:1210.0.1.0 [2025-09-24 01:19:42.964] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:19:43.076] j-A [2025-09-24 01:19:50.413] The R5 Autosar Classic is running [2025-09-24 01:19:50.445] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:19:50.445] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:19:51.052] INIT: version 2.96 booting [2025-09-24 01:19:51.163] INIT: Entering runlevel: 5 [2025-09-24 01:19:51.324] mtd24 attached [2025-09-24 01:19:51.340] mtd28 attached [2025-09-24 01:19:51.356] mtd32 attached [2025-09-24 01:19:51.388] ubi0:textures is mounted. [2025-09-24 01:19:51.410] ubi1:animations is mounted. [2025-09-24 01:19:51.410] RTNETLINK answers: File exists [2025-09-24 01:19:51.410] ubi2:dml_code is mounted. [2025-09-24 01:19:51.459] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:19:51.459] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:19:51.459] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:19:51.459] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:19:51.459] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:19:51.459] data.LB_FadeInType0=100 [2025-09-24 01:19:51.459] data.CHLH_FadeInType0=0 [2025-09-24 01:19:51.459] data.WU_FadeInDelay=0 [2025-09-24 01:19:51.459] max_time_out=0 [2025-09-24 01:19:51.459] No splash screen [2025-09-24 01:19:51.459] stop dss Done [2025-09-24 01:19:51.490] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:19:51.525] /dev/mem opened. [2025-09-24 01:19:51.525] Memory mapped at address 0xffffb2273000. [2025-09-24 01:19:51.525] Read at address 0x00600018 (0xffffb2273018): 0x00000000 [2025-09-24 01:19:51.525] Write at address 0x00600018 (0xffffb2273018): 0x00400040, readback 0x00400040 [2025-09-24 01:19:51.525] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:19:51.653] Loaded PowerVR consumer services. [2025-09-24 01:19:51.813] Waiting data available... [2025-09-24 01:19:51.845] 512+0 records in [2025-09-24 01:19:51.845] 512+0 records out [2025-09-24 01:19:51.893] Starting syslogd/klogd: done [2025-09-24 01:19:51.909] DML Start [2025-09-24 01:19:52.069] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:19:52.309] DML res1: 0 [2025-09-24 01:19:52.734] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:19:52.734] Read Success [2025-09-24 01:19:52.734] Verifying certificate... [2025-09-24 01:19:52.974] Verified OK [2025-09-24 01:19:52.990] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:19:54.684] Verified OK [2025-09-24 01:19:54.684] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:19:55.220] Verified OK [2025-09-24 01:19:55.220] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:19:57.776] fs.protected_hardlinks = 1 [2025-09-24 01:19:57.776] fs.protected_symlinks = 1 [2025-09-24 01:19:57.776] kernel.modules_disabled = 1 [2025-09-24 01:19:57.968] [2025-09-24 01:19:57.968] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:19:59.323] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:20:07.140] SBL1:1210.0.1.0 [2025-09-24 01:20:07.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:20:08.755] SBL2:1210.0.1.0 [2025-09-24 01:20:08.802] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:20:08.914] j-A [2025-09-24 01:20:16.287] The R5 Autosar Classic is running [2025-09-24 01:20:16.287] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:20:16.287] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:20:16.894] INIT: version 2.96 booting [2025-09-24 01:20:17.007] INIT: Entering runlevel: 5 [2025-09-24 01:20:17.150] mtd24 attached [2025-09-24 01:20:17.166] mtd28 attached [2025-09-24 01:20:17.182] mtd32 attached [2025-09-24 01:20:17.231] RTNETLINK answers: File exists [2025-09-24 01:20:17.231] ubi0:textures is mounted. [2025-09-24 01:20:17.291] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:20:17.291] ubi1:animations is mounted. [2025-09-24 01:20:17.291] ubi2:dml_code is mounted. [2025-09-24 01:20:17.291] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:20:17.291] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:20:17.291] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:20:17.291] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:20:17.291] data.LB_FadeInType0=100 [2025-09-24 01:20:17.291] data.CHLH_FadeInType0=0 [2025-09-24 01:20:17.291] data.WU_FadeInDelay=0 [2025-09-24 01:20:17.291] max_time_out=0 [2025-09-24 01:20:17.291] No splash screen [2025-09-24 01:20:17.291] stop dss Done [2025-09-24 01:20:17.346] /dev/mem opened. [2025-09-24 01:20:17.346] Memory mapped at address 0xffffa0a92000. [2025-09-24 01:20:17.346] Read at address 0x00600018 (0xffffa0a92018): 0x00000000 [2025-09-24 01:20:17.346] Write at address 0x00600018 (0xffffa0a92018): 0x00400040, readback 0x00400040 [2025-09-24 01:20:17.346] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:20:17.369] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:20:17.497] Loaded PowerVR consumer services. [2025-09-24 01:20:17.656] Waiting data available... [2025-09-24 01:20:17.672] 512+0 records in [2025-09-24 01:20:17.672] 512+0 records out [2025-09-24 01:20:17.721] Starting syslogd/klogd: done [2025-09-24 01:20:17.737] DML Start [2025-09-24 01:20:17.896] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:20:18.169] DML res1: 0 [2025-09-24 01:20:18.526] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:20:18.526] Read Success [2025-09-24 01:20:18.526] Verifying certificate... [2025-09-24 01:20:18.766] Verified OK [2025-09-24 01:20:18.766] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:20:20.503] Verified OK [2025-09-24 01:20:20.503] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:20:21.071] Verified OK [2025-09-24 01:20:21.071] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:20:23.661] fs.protected_hardlinks = 1 [2025-09-24 01:20:23.661] fs.protected_symlinks = 1 [2025-09-24 01:20:23.677] kernel.modules_disabled = 1 [2025-09-24 01:20:23.868] [2025-09-24 01:20:23.868] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:20:25.179] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:20:32.974] SBL1:1210.0.1.0 [2025-09-24 01:20:33.006] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:20:34.588] SBL2:1210.0.1.0 [2025-09-24 01:20:34.620] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:20:34.732] j-A [2025-09-24 01:20:42.086] The R5 Autosar Classic is running [2025-09-24 01:20:42.086] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:20:42.107] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:20:42.714] INIT: version 2.96 booting [2025-09-24 01:20:42.826] INIT: Entering runlevel: 5 [2025-09-24 01:20:42.986] mtd24 attached [2025-09-24 01:20:42.986] mtd28 attached [2025-09-24 01:20:43.002] mtd32 attached [2025-09-24 01:20:43.050] ubi0:textures is mounted. [2025-09-24 01:20:43.050] RTNETLINK answers: File exists [2025-09-24 01:20:43.099] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:20:43.099] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:20:43.099] ubi1:animations is mounted. [2025-09-24 01:20:43.099] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:20:43.099] ubi2:dml_code is mounted. [2025-09-24 01:20:43.099] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:20:43.099] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:20:43.121] data.LB_FadeInType0=100 [2025-09-24 01:20:43.121] data.CHLH_FadeInType0=0 [2025-09-24 01:20:43.121] data.WU_FadeInDelay=0 [2025-09-24 01:20:43.121] max_time_out=0 [2025-09-24 01:20:43.121] No splash screen [2025-09-24 01:20:43.121] stop dss Done [2025-09-24 01:20:43.137] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:20:43.137] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:20:43.168] /dev/mem opened. [2025-09-24 01:20:43.168] Memory mapped at address 0xffffa612f000. [2025-09-24 01:20:43.194] Read at address 0x00600018 (0xffffa612f018): 0x00000000 [2025-09-24 01:20:43.194] Write at address 0x00600018 (0xffffa612f018): 0x00400040, readback 0x00400040 [2025-09-24 01:20:43.323] Loaded PowerVR consumer services. [2025-09-24 01:20:43.466] Waiting data available... [2025-09-24 01:20:43.483] 512+0 records in [2025-09-24 01:20:43.499] 512+0 records out [2025-09-24 01:20:43.531] Starting syslogd/klogd: done [2025-09-24 01:20:43.547] DML Start [2025-09-24 01:20:43.691] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:20:43.898] DML res1: 0 [2025-09-24 01:20:44.378] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:20:44.399] Read Success [2025-09-24 01:20:44.399] Verifying certificate... [2025-09-24 01:20:44.623] Verified OK [2025-09-24 01:20:44.639] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:20:46.349] Verified OK [2025-09-24 01:20:46.349] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:20:46.876] Verified OK [2025-09-24 01:20:46.876] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:20:49.338] fs.protected_hardlinks = 1 [2025-09-24 01:20:49.366] fs.protected_symlinks = 1 [2025-09-24 01:20:49.366] kernel.modules_disabled = 1 [2025-09-24 01:20:49.542] [2025-09-24 01:20:49.542] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:20:50.984] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:20:58.770] SBL1:1210.0.1.0 [2025-09-24 01:20:58.818] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:21:00.384] SBL2:1210.0.1.0 [2025-09-24 01:21:00.432] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:21:00.545] j-A [2025-09-24 01:21:07.882] The R5 Autosar Classic is running [2025-09-24 01:21:07.914] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:21:07.914] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:21:08.521] INIT: version 2.96 booting [2025-09-24 01:21:08.617] INIT: Entering runlevel: 5 [2025-09-24 01:21:08.777] mtd28 attached [2025-09-24 01:21:08.793] mtd24 attached [2025-09-24 01:21:08.808] mtd32 attached [2025-09-24 01:21:08.825] ubi0:animations is mounted. [2025-09-24 01:21:08.856] RTNETLINK answers: File exists [2025-09-24 01:21:08.913] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:21:08.913] ubi1:textures is mounted. [2025-09-24 01:21:08.913] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:21:08.913] ubi2:dml_code is mounted. [2025-09-24 01:21:08.913] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:21:08.913] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:21:08.913] data.LB_FadeInType0=100 [2025-09-24 01:21:08.913] data.CHLH_FadeInType0=0 [2025-09-24 01:21:08.913] data.WU_FadeInDelay=0 [2025-09-24 01:21:08.913] max_time_out=0 [2025-09-24 01:21:08.913] No splash screen [2025-09-24 01:21:08.913] stop dss Done [2025-09-24 01:21:08.913] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:21:08.962] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:21:08.994] /dev/mem opened. [2025-09-24 01:21:08.994] Memory mapped at address 0xffff88f45000. [2025-09-24 01:21:08.994] Read at address 0x00600018 (0xffff88f45018): 0x00000000 [2025-09-24 01:21:08.994] Write at address 0x00600018 (0xffff88f45018): 0x00400040, readback 0x00400040 [2025-09-24 01:21:08.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:21:09.073] Loaded PowerVR consumer services. [2025-09-24 01:21:09.250] Waiting data available... [2025-09-24 01:21:09.297] 512+0 records in [2025-09-24 01:21:09.297] 512+0 records out [2025-09-24 01:21:09.313] Starting syslogd/klogd: done [2025-09-24 01:21:09.329] DML Start [2025-09-24 01:21:09.521] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:21:09.728] DML res1: 0 [2025-09-24 01:21:10.160] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:21:10.181] Read Success [2025-09-24 01:21:10.181] Verifying certificate... [2025-09-24 01:21:10.470] Verified OK [2025-09-24 01:21:10.486] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:21:12.209] Verified OK [2025-09-24 01:21:12.209] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:21:12.769] Verified OK [2025-09-24 01:21:12.769] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:21:15.327] fs.protected_hardlinks = 1 [2025-09-24 01:21:15.327] fs.protected_symlinks = 1 [2025-09-24 01:21:15.342] kernel.modules_disabled = 1 [2025-09-24 01:21:15.534] [2025-09-24 01:21:15.534] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:21:16.763] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:21:24.612] SBL1:1210.0.1.0 [2025-09-24 01:21:24.660] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:21:26.227] SBL2:1210.0.1.0 [2025-09-24 01:21:26.274] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:21:26.370] j-A [2025-09-24 01:21:33.726] The R5 Autosar Classic is running [2025-09-24 01:21:33.750] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:21:33.750] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:21:34.357] INIT: version 2.96 booting [2025-09-24 01:21:34.469] INIT: Entering runlevel: 5 [2025-09-24 01:21:34.628] mtd24 attached [2025-09-24 01:21:34.628] mtd28 attached [2025-09-24 01:21:34.644] mtd32 attached [2025-09-24 01:21:34.693] ubi0:textures is mounted. [2025-09-24 01:21:34.693] RTNETLINK answers: File exists [2025-09-24 01:21:34.730] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:21:34.731] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:21:34.731] ubi1:animations is mounted. [2025-09-24 01:21:34.731] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:21:34.731] ubi2:dml_code is mounted. [2025-09-24 01:21:34.731] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:21:34.731] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:21:34.782] data.LB_FadeInType0=100 [2025-09-24 01:21:34.782] data.CHLH_FadeInType0=0 [2025-09-24 01:21:34.782] data.WU_FadeInDelay=0 [2025-09-24 01:21:34.782] max_time_out=0 [2025-09-24 01:21:34.782] No splash screen [2025-09-24 01:21:34.782] stop dss Done [2025-09-24 01:21:34.782] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:21:34.782] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:21:34.838] /dev/mem opened. [2025-09-24 01:21:34.838] Memory mapped at address 0xffffa9397000. [2025-09-24 01:21:34.838] Read at address 0x00600018 (0xffffa9397018): 0x00000000 [2025-09-24 01:21:34.838] Write at address 0x00600018 (0xffffa9397018): 0x00400040, readback 0x00400040 [2025-09-24 01:21:34.903] Loaded PowerVR consumer services. [2025-09-24 01:21:35.094] Waiting data available... [2025-09-24 01:21:35.126] 512+0 records in [2025-09-24 01:21:35.126] 512+0 records out [2025-09-24 01:21:35.142] Starting syslogd/klogd: done [2025-09-24 01:21:35.158] DML Start [2025-09-24 01:21:35.318] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:21:35.574] DML res1: 0 [2025-09-24 01:21:36.015] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:21:36.015] Read Success [2025-09-24 01:21:36.015] Verifying certificate... [2025-09-24 01:21:36.239] Verified OK [2025-09-24 01:21:36.255] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:21:37.878] Verified OK [2025-09-24 01:21:37.878] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:21:38.428] Verified OK [2025-09-24 01:21:38.428] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:21:41.178] fs.protected_hardlinks = 1 [2025-09-24 01:21:41.194] fs.protected_symlinks = 1 [2025-09-24 01:21:41.194] kernel.modules_disabled = 1 [2025-09-24 01:21:41.402] [2025-09-24 01:21:41.402] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:21:42.599] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:21:50.445] SBL1:1210.0.1.0 [2025-09-24 01:21:50.493] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:21:52.060] SBL2:1210.0.1.0 [2025-09-24 01:21:52.108] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:21:52.220] j-A [2025-09-24 01:21:59.593] The R5 Autosar Classic is running [2025-09-24 01:21:59.593] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:21:59.593] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:22:00.201] INIT: version 2.96 booting [2025-09-24 01:22:00.312] INIT: Entering runlevel: 5 [2025-09-24 01:22:00.472] mtd24 attached [2025-09-24 01:22:00.488] mtd32 attached [2025-09-24 01:22:00.504] mtd28 attached [2025-09-24 01:22:00.520] ubi0:textures is mounted. [2025-09-24 01:22:00.552] ubi1:dml_code is mounted. [2025-09-24 01:22:00.552] RTNETLINK answers: File exists [2025-09-24 01:22:00.608] ubi2:animations is mounted. [2025-09-24 01:22:00.608] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:22:00.608] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:22:00.608] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:22:00.608] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:22:00.608] data.LB_FadeInType0=100 [2025-09-24 01:22:00.608] data.CHLH_FadeInType0=0 [2025-09-24 01:22:00.608] data.WU_FadeInDelay=0 [2025-09-24 01:22:00.608] max_time_out=0 [2025-09-24 01:22:00.608] No splash screen [2025-09-24 01:22:00.608] stop dss Done [2025-09-24 01:22:00.608] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:22:00.624] /dev/mem opened. [2025-09-24 01:22:00.650] Memory mapped at address 0xffff97080000. [2025-09-24 01:22:00.650] Read at address 0x00600018 (0xffff97080018): 0x00000000 [2025-09-24 01:22:00.650] Write at address 0x00600018 (0xffff97080018): 0x00400040, readback 0x00400040 [2025-09-24 01:22:00.666] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:22:00.698] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:22:00.826] Loaded PowerVR consumer services. [2025-09-24 01:22:00.970] Waiting data available... [2025-09-24 01:22:00.986] 512+0 records in [2025-09-24 01:22:00.986] 512+0 records out [2025-09-24 01:22:01.034] Starting syslogd/klogd: done [2025-09-24 01:22:01.049] DML Start [2025-09-24 01:22:01.241] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:22:01.465] DML res1: 0 [2025-09-24 01:22:01.909] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:22:01.909] Read Success [2025-09-24 01:22:01.909] Verifying certificate... [2025-09-24 01:22:02.133] Verified OK [2025-09-24 01:22:02.149] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:22:03.811] Verified OK [2025-09-24 01:22:03.811] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:22:04.459] Verified OK [2025-09-24 01:22:04.459] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:22:07.000] fs.protected_hardlinks = 1 [2025-09-24 01:22:07.000] fs.protected_symlinks = 1 [2025-09-24 01:22:07.016] kernel.modules_disabled = 1 [2025-09-24 01:22:07.208] [2025-09-24 01:22:07.208] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:22:08.464] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:22:16.293] SBL1:1210.0.1.0 [2025-09-24 01:22:16.325] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:22:17.908] SBL2:1210.0.1.0 [2025-09-24 01:22:17.956] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 01:22:18.051] j-A [2025-09-24 01:22:25.408] The R5 Autosar Classic is running [2025-09-24 01:22:25.429] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:22:25.429] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:22:26.037] INIT: version 2.96 booting [2025-09-24 01:22:26.148] INIT: Entering runlevel: 5 [2025-09-24 01:22:26.308] mtd24 attached [2025-09-24 01:22:26.308] mtd28 attached [2025-09-24 01:22:26.324] mtd32 attached [2025-09-24 01:22:26.357] ubi0:textures is mounted. [2025-09-24 01:22:26.373] RTNETLINK answers: File exists [2025-09-24 01:22:26.439] ubi2:dml_code is mounted. [2025-09-24 01:22:26.439] ubi1:animations is mounted. [2025-09-24 01:22:26.439] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:22:26.439] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:22:26.439] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:22:26.439] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:22:26.439] data.LB_FadeInType0=100 [2025-09-24 01:22:26.439] data.CHLH_FadeInType0=0 [2025-09-24 01:22:26.439] data.WU_FadeInDelay=0 [2025-09-24 01:22:26.439] max_time_out=0 [2025-09-24 01:22:26.439] No splash screen [2025-09-24 01:22:26.439] stop dss Done [2025-09-24 01:22:26.439] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:22:26.470] /dev/mem opened. [2025-09-24 01:22:26.470] Memory mapped at address 0xffff8de7b000. [2025-09-24 01:22:26.496] Read at address 0x00600018 (0xffff8de7b018): 0x00000000 [2025-09-24 01:22:26.496] Write at address 0x00600018 (0xffff8de7b018): 0x00400040, readback 0x00400040 [2025-09-24 01:22:26.527] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:22:26.527] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:22:26.624] Loaded PowerVR consumer services. [2025-09-24 01:22:26.783] Waiting data available... [2025-09-24 01:22:26.815] 512+0 records in [2025-09-24 01:22:26.815] 512+0 records out [2025-09-24 01:22:26.863] Starting syslogd/klogd: done [2025-09-24 01:22:26.879] DML Start [2025-09-24 01:22:27.087] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:22:27.327] DML res1: 0 [2025-09-24 01:22:27.710] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:22:27.710] Read Success [2025-09-24 01:22:27.710] Verifying certificate... [2025-09-24 01:22:27.950] Verified OK [2025-09-24 01:22:27.981] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:22:29.661] Verified OK [2025-09-24 01:22:29.661] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:22:30.204] Verified OK [2025-09-24 01:22:30.220] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:22:32.698] fs.protected_hardlinks = 1 [2025-09-24 01:22:32.698] fs.protected_symlinks = 1 [2025-09-24 01:22:32.714] kernel.modules_disabled = 1 [2025-09-24 01:22:32.905] [2025-09-24 01:22:32.905] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:22:34.301] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:22:42.102] SBL1:1210.0.1.0 [2025-09-24 01:22:42.150] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:22:43.734] SBL2:1210.0.1.0 [2025-09-24 01:22:43.766] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:22:43.877] j-A [2025-09-24 01:22:51.252] The R5 Autosar Classic is running [2025-09-24 01:22:51.252] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:22:51.252] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:22:51.860] INIT: version 2.96 booting [2025-09-24 01:22:51.971] INIT: Entering runlevel: 5 [2025-09-24 01:22:52.131] mtd24 attached [2025-09-24 01:22:52.131] mtd28 attached [2025-09-24 01:22:52.147] mtd32 attached [2025-09-24 01:22:52.195] ubi0:textures is mounted. [2025-09-24 01:22:52.195] RTNETLINK answers: File exists [2025-09-24 01:22:52.263] ubi2:dml_code is mounted. [2025-09-24 01:22:52.263] ubi1:animations is mounted. [2025-09-24 01:22:52.263] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:22:52.263] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:22:52.263] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:22:52.263] data.LB_FadeInType0=100 [2025-09-24 01:22:52.263] data.CHLH_FadeInType0=0 [2025-09-24 01:22:52.263] data.WU_FadeInDelay=0 [2025-09-24 01:22:52.263] max_time_out=0 [2025-09-24 01:22:52.263] No splash screen [2025-09-24 01:22:52.263] stop dss Done [2025-09-24 01:22:52.263] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:22:52.263] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:22:52.295] /dev/mem opened. [2025-09-24 01:22:52.321] Memory mapped at address 0xffff8bf74000. [2025-09-24 01:22:52.321] Read at address 0x00600018 (0xffff8bf74018): 0x00000000 [2025-09-24 01:22:52.321] Write at address 0x00600018 (0xffff8bf74018): 0x00400040, readback 0x00400040 [2025-09-24 01:22:52.337] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:22:52.353] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:22:52.614] Loaded PowerVR consumer services. [2025-09-24 01:22:52.614] Waiting data available... [2025-09-24 01:22:52.646] 512+0 records in [2025-09-24 01:22:52.646] 512+0 records out [2025-09-24 01:22:52.678] Starting syslogd/klogd: done [2025-09-24 01:22:52.694] DML Start [2025-09-24 01:22:52.870] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:22:53.126] DML res1: 0 [2025-09-24 01:22:53.538] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:22:53.538] Read Success [2025-09-24 01:22:53.538] Verifying certificate... [2025-09-24 01:22:53.762] Verified OK [2025-09-24 01:22:53.778] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:22:55.418] Verified OK [2025-09-24 01:22:55.418] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:22:56.098] Verified OK [2025-09-24 01:22:56.098] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:22:58.764] fs.protected_hardlinks = 1 [2025-09-24 01:22:58.764] fs.protected_symlinks = 1 [2025-09-24 01:22:58.764] kernel.modules_disabled = 1 [2025-09-24 01:22:58.971] [2025-09-24 01:22:58.971] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:23:00.122] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:23:07.942] SBL1:1210.0.1.0 [2025-09-24 01:23:07.990] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:23:09.557] SBL2:1210.0.1.0 [2025-09-24 01:23:09.605] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:23:09.716] j-A [2025-09-24 01:23:17.055] The R5 Autosar Classic is running [2025-09-24 01:23:17.086] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:23:17.086] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:23:17.694] INIT: version 2.96 booting [2025-09-24 01:23:17.806] INIT: Entering runlevel: 5 [2025-09-24 01:23:17.966] mtd32 attached [2025-09-24 01:23:17.966] mtd24 attached [2025-09-24 01:23:17.982] mtd28 attached [2025-09-24 01:23:18.030] RTNETLINK answers: File exists [2025-09-24 01:23:18.030] ubi0:dml_code is mounted. [2025-09-24 01:23:18.086] ubi1:textures is mounted. [2025-09-24 01:23:18.086] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:23:18.086] ubi2:animations is mounted. [2025-09-24 01:23:18.086] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:23:18.086] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:23:18.086] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:23:18.086] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:23:18.086] data.LB_FadeInType0=100 [2025-09-24 01:23:18.086] data.CHLH_FadeInType0=0 [2025-09-24 01:23:18.086] data.WU_FadeInDelay=0 [2025-09-24 01:23:18.086] max_time_out=0 [2025-09-24 01:23:18.086] No splash screen [2025-09-24 01:23:18.086] stop dss Done [2025-09-24 01:23:18.134] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:23:18.176] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:23:18.176] /dev/mem opened. [2025-09-24 01:23:18.176] Memory mapped at address 0xffff8f28f000. [2025-09-24 01:23:18.176] Read at address 0x00600018 (0xffff8f28f018): 0x00000000 [2025-09-24 01:23:18.176] Write at address 0x00600018 (0xffff8f28f018): 0x00400040, readback 0x00400040 [2025-09-24 01:23:18.256] Loaded PowerVR consumer services. [2025-09-24 01:23:18.448] Waiting data available... [2025-09-24 01:23:18.479] 512+0 records in [2025-09-24 01:23:18.479] 512+0 records out [2025-09-24 01:23:18.511] Starting syslogd/klogd: done [2025-09-24 01:23:18.527] DML Start [2025-09-24 01:23:18.687] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:23:18.879] DML res1: 0 [2025-09-24 01:23:19.403] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:23:19.403] Read Success [2025-09-24 01:23:19.403] Verifying certificate... [2025-09-24 01:23:19.675] Verified OK [2025-09-24 01:23:19.691] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:23:21.283] Verified OK [2025-09-24 01:23:21.283] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:23:21.855] Verified OK [2025-09-24 01:23:21.855] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:23:24.445] fs.protected_hardlinks = 1 [2025-09-24 01:23:24.461] fs.protected_symlinks = 1 [2025-09-24 01:23:24.461] kernel.modules_disabled = 1 [2025-09-24 01:23:24.669] [2025-09-24 01:23:24.669] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:23:25.944] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:23:33.781] SBL1:1210.0.1.0 [2025-09-24 01:23:33.829] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:23:35.395] SBL2:1210.0.1.0 [2025-09-24 01:23:35.443] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:23:35.555] j-A [2025-09-24 01:23:42.895] The R5 Autosar Classic is running [2025-09-24 01:23:42.926] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:23:42.926] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:23:43.533] INIT: version 2.96 booting [2025-09-24 01:23:43.645] INIT: Entering runlevel: 5 [2025-09-24 01:23:43.789] mtd32 attached [2025-09-24 01:23:43.804] mtd28 attached [2025-09-24 01:23:43.804] mtd24 attached [2025-09-24 01:23:43.869] RTNETLINK answers: File exists [2025-09-24 01:23:43.869] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:23:43.927] ubi1:animations is mounted. [2025-09-24 01:23:43.927] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:23:43.927] ubi0:dml_code is mounted. [2025-09-24 01:23:43.927] ubi2:textures is mounted. [2025-09-24 01:23:43.927] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:23:43.927] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:23:43.927] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:23:43.927] data.LB_FadeInType0=100 [2025-09-24 01:23:43.927] data.CHLH_FadeInType0=0 [2025-09-24 01:23:43.927] data.WU_FadeInDelay=0 [2025-09-24 01:23:43.927] max_time_out=0 [2025-09-24 01:23:43.927] No splash screen [2025-09-24 01:23:43.927] stop dss Done [2025-09-24 01:23:43.959] /dev/mem opened. [2025-09-24 01:23:43.959] Memory mapped at address 0xffffb97a9000. [2025-09-24 01:23:43.991] Read at address 0x00600018 (0xffffb97a9018): 0x00000000 [2025-09-24 01:23:43.991] Write at address 0x00600018 (0xffffb97a9018): 0x00400040, readback 0x00400040 [2025-09-24 01:23:43.991] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:23:43.991] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:23:44.135] Loaded PowerVR consumer services. [2025-09-24 01:23:44.263] Waiting data available... [2025-09-24 01:23:44.311] 512+0 records in [2025-09-24 01:23:44.311] 512+0 records out [2025-09-24 01:23:44.358] Starting syslogd/klogd: done [2025-09-24 01:23:44.375] DML Start [2025-09-24 01:23:44.599] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:23:44.823] DML res1: 0 [2025-09-24 01:23:45.201] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:23:45.201] Read Success [2025-09-24 01:23:45.201] Verifying certificate... [2025-09-24 01:23:45.457] Verified OK [2025-09-24 01:23:45.457] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:23:47.040] Verified OK [2025-09-24 01:23:47.040] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:23:47.615] Verified OK [2025-09-24 01:23:47.615] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:23:50.302] fs.protected_hardlinks = 1 [2025-09-24 01:23:50.318] fs.protected_symlinks = 1 [2025-09-24 01:23:50.318] kernel.modules_disabled = 1 [2025-09-24 01:23:50.510] [2025-09-24 01:23:50.510] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:23:51.853] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:23:59.631] SBL1:1210.0.1.0 [2025-09-24 01:23:59.663] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:24:01.246] SBL2:1210.0.1.0 [2025-09-24 01:24:01.277] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:24:01.389] j-A [2025-09-24 01:24:08.744] The R5 Autosar Classic is running [2025-09-24 01:24:08.744] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:24:08.765] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:24:09.373] INIT: version 2.96 booting [2025-09-24 01:24:09.485] INIT: Entering runlevel: 5 [2025-09-24 01:24:09.628] mtd24 attached [2025-09-24 01:24:09.644] mtd28 attached [2025-09-24 01:24:09.660] mtd32 attached [2025-09-24 01:24:09.676] ubi0:textures is mounted. [2025-09-24 01:24:09.692] ubi1:animations is mounted. [2025-09-24 01:24:09.709] RTNETLINK answers: File exists [2025-09-24 01:24:09.709] ubi2:dml_code is mounted. [2025-09-24 01:24:09.767] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:24:09.767] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:24:09.767] data.LB_FadeInType0=100 [2025-09-24 01:24:09.767] data.CHLH_FadeInType0=0 [2025-09-24 01:24:09.767] data.WU_FadeInDelay=0 [2025-09-24 01:24:09.767] max_time_out=0 [2025-09-24 01:24:09.767] No splash screen [2025-09-24 01:24:09.767] stop dss Done [2025-09-24 01:24:09.767] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:24:09.767] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:24:09.767] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:24:09.799] /dev/mem opened. [2025-09-24 01:24:09.799] Memory mapped at address 0xffff8e819000. [2025-09-24 01:24:09.825] Read at address 0x00600018 (0xffff8e819018): 0x00000000 [2025-09-24 01:24:09.825] Write at address 0x00600018 (0xffff8e819018): 0x00400040, readback 0x00400040 [2025-09-24 01:24:09.873] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:24:09.889] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:24:10.113] Loaded PowerVR consumer services. [2025-09-24 01:24:10.129] Waiting data available... [2025-09-24 01:24:10.161] 512+0 records in [2025-09-24 01:24:10.161] 512+0 records out [2025-09-24 01:24:10.192] Starting syslogd/klogd: done [2025-09-24 01:24:10.208] DML Start [2025-09-24 01:24:10.353] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:24:10.560] DML res1: 0 [2025-09-24 01:24:11.088] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:24:11.104] Read Success [2025-09-24 01:24:11.104] Verifying certificate... [2025-09-24 01:24:11.328] Verified OK [2025-09-24 01:24:11.343] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:24:13.023] Verified OK [2025-09-24 01:24:13.023] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:24:13.628] Verified OK [2025-09-24 01:24:13.628] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:24:16.139] fs.protected_hardlinks = 1 [2025-09-24 01:24:16.139] fs.protected_symlinks = 1 [2025-09-24 01:24:16.155] kernel.modules_disabled = 1 [2025-09-24 01:24:16.347] [2025-09-24 01:24:16.347] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:24:17.633] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:24:25.421] SBL1:1210.0.1.0 [2025-09-24 01:24:25.453] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:24:27.037] SBL2:1210.0.1.0 [2025-09-24 01:24:27.084] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:24:27.180] j-A [2025-09-24 01:24:34.535] The R5 Autosar Classic is running [2025-09-24 01:24:34.558] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:24:34.558] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:24:35.166] INIT: version 2.96 booting [2025-09-24 01:24:35.278] INIT: Entering runlevel: 5 [2025-09-24 01:24:35.422] mtd24 attached [2025-09-24 01:24:35.438] mtd28 attached [2025-09-24 01:24:35.454] mtd32 attached [2025-09-24 01:24:35.502] ubi0:textures is mounted. [2025-09-24 01:24:35.502] RTNETLINK answers: File exists [2025-09-24 01:24:35.554] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:24:35.554] ubi1:animations is mounted. [2025-09-24 01:24:35.554] ubi2:dml_code is mounted. [2025-09-24 01:24:35.554] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:24:35.554] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:24:35.554] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:24:35.554] data.LB_FadeInType0=100 [2025-09-24 01:24:35.554] data.CHLH_FadeInType0=0 [2025-09-24 01:24:35.554] data.WU_FadeInDelay=0 [2025-09-24 01:24:35.554] max_time_out=0 [2025-09-24 01:24:35.554] No splash screen [2025-09-24 01:24:35.554] stop dss Done [2025-09-24 01:24:35.554] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:24:35.602] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:24:35.640] /dev/mem opened. [2025-09-24 01:24:35.640] Memory mapped at address 0xffffbf215000. [2025-09-24 01:24:35.640] Read at address 0x00600018 (0xffffbf215018): 0x00000000 [2025-09-24 01:24:35.640] Write at address 0x00600018 (0xffffbf215018): 0x00400040, readback 0x00400040 [2025-09-24 01:24:35.640] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:24:35.736] Loaded PowerVR consumer services. [2025-09-24 01:24:35.912] Waiting data available... [2025-09-24 01:24:35.928] 512+0 records in [2025-09-24 01:24:35.928] 512+0 records out [2025-09-24 01:24:35.976] Starting syslogd/klogd: done [2025-09-24 01:24:35.992] DML Start [2025-09-24 01:24:36.184] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:24:36.440] DML res1: 0 [2025-09-24 01:24:36.791] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:24:36.791] Read Success [2025-09-24 01:24:36.807] Verifying certificate... [2025-09-24 01:24:37.063] Verified OK [2025-09-24 01:24:37.079] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:24:38.807] Verified OK [2025-09-24 01:24:38.807] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:24:39.462] Verified OK [2025-09-24 01:24:39.462] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:24:40.133] 5485 GC [0] [2025-09-24 01:24:40.196] 5552 GC [1] [2025-09-24 01:24:40.277] 5633 GC [2] [2025-09-24 01:24:40.341] 5702 GC [3] [2025-09-24 01:24:40.421] 5774 GC [4] [2025-09-24 01:24:40.485] 5843 GC [5] [2025-09-24 01:24:40.564] 5914 GC [6] [2025-09-24 01:24:40.628] 5982 GC [7] [2025-09-24 01:24:40.693] 6056 GC [8] [2025-09-24 01:24:40.757] 6122 GC [9] [2025-09-24 01:24:40.837] 6195 GC [10] [2025-09-24 01:24:40.900] 6252 GC [11] [2025-09-24 01:24:40.965] 6313 GC [12] [2025-09-24 01:24:41.013] 6375 GC [13] [2025-09-24 01:24:41.076] 6432 GC [14] [2025-09-24 01:24:41.124] 6485 GC [15] [2025-09-24 01:24:41.188] 6543 GC [16] [2025-09-24 01:24:41.253] 6604 GC [17] [2025-09-24 01:24:41.300] 6662 GC [18] [2025-09-24 01:24:41.364] 6723 GC [19] [2025-09-24 01:24:41.412] 6771 GC [20] [2025-09-24 01:24:41.477] 6832 GC [21] [2025-09-24 01:24:41.540] 6896 GC [22] [2025-09-24 01:24:41.604] 6963 GC [23] [2025-09-24 01:24:41.652] 7014 GC [24] [2025-09-24 01:24:41.732] 7083 GC [25] [2025-09-24 01:24:41.781] 7134 GC [26] [2025-09-24 01:24:41.844] 7203 GC [27] [2025-09-24 01:24:41.908] 7263 GC [28] [2025-09-24 01:24:41.908] 7274 GC [29] [2025-09-24 01:24:41.988] GC DONE [2025-09-24 01:24:42.035] fs.protected_hardlinks = 1 [2025-09-24 01:24:42.035] fs.protected_symlinks = 1 [2025-09-24 01:24:42.052] kernel.modules_disabled = 1 [2025-09-24 01:24:42.244] [2025-09-24 01:24:42.244] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:24:43.394] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:24:51.227] SBL1:1210.0.1.0 [2025-09-24 01:24:51.275] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:24:52.842] SBL2:1210.0.1.0 [2025-09-24 01:24:52.874] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:24:52.986] j-A [2025-09-24 01:25:00.340] The R5 Autosar Classic is running [2025-09-24 01:25:00.340] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:25:00.361] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:25:00.969] INIT: version 2.96 booting [2025-09-24 01:25:01.081] INIT: Entering runlevel: 5 [2025-09-24 01:25:01.224] mtd24 attached [2025-09-24 01:25:01.240] mtd28 attached [2025-09-24 01:25:01.256] mtd32 attached [2025-09-24 01:25:01.305] ubi0:textures is mounted. [2025-09-24 01:25:01.305] RTNETLINK answers: File exists [2025-09-24 01:25:01.345] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:25:01.345] ubi1:animations is mounted. [2025-09-24 01:25:01.345] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:25:01.345] ubi2:dml_code is mounted. [2025-09-24 01:25:01.345] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:25:01.345] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:25:01.345] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:25:01.366] data.LB_FadeInType0=100 [2025-09-24 01:25:01.366] data.CHLH_FadeInType0=0 [2025-09-24 01:25:01.366] data.WU_FadeInDelay=0 [2025-09-24 01:25:01.366] max_time_out=0 [2025-09-24 01:25:01.366] No splash screen [2025-09-24 01:25:01.366] stop dss Done [2025-09-24 01:25:01.414] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:25:01.453] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:25:01.453] /dev/mem opened. [2025-09-24 01:25:01.453] Memory mapped at address 0xffffa215c000. [2025-09-24 01:25:01.453] Read at address 0x00600018 (0xffffa215c018): 0x00000000 [2025-09-24 01:25:01.453] Write at address 0x00600018 (0xffffa215c018): 0x00400040, readback 0x00400040 [2025-09-24 01:25:01.613] Loaded PowerVR consumer services. [2025-09-24 01:25:01.661] 512+0 records in [2025-09-24 01:25:01.661] 512+0 records out [2025-09-24 01:25:01.693] Waiting data available... [2025-09-24 01:25:01.709] Starting syslogd/klogd: done [2025-09-24 01:25:01.725] DML Start [2025-09-24 01:25:01.917] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:25:02.141] DML res1: 0 [2025-09-24 01:25:02.556] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:25:02.577] Read Success [2025-09-24 01:25:02.577] Verifying certificate... [2025-09-24 01:25:02.834] Verified OK [2025-09-24 01:25:02.849] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:25:04.486] Verified OK [2025-09-24 01:25:04.486] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:25:05.062] Verified OK [2025-09-24 01:25:05.062] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:25:07.637] fs.protected_hardlinks = 1 [2025-09-24 01:25:07.637] fs.protected_symlinks = 1 [2025-09-24 01:25:07.653] kernel.modules_disabled = 1 [2025-09-24 01:25:07.844] [2025-09-24 01:25:07.844] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:25:09.252] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:25:17.042] SBL1:1210.0.1.0 [2025-09-24 01:25:17.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:25:18.657] SBL2:1210.0.1.0 [2025-09-24 01:25:18.705] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:25:18.801] j-A [2025-09-24 01:25:26.157] The R5 Autosar Classic is running [2025-09-24 01:25:26.179] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:25:26.179] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:25:26.785] INIT: version 2.96 booting [2025-09-24 01:25:26.898] INIT: Entering runlevel: 5 [2025-09-24 01:25:27.058] mtd32 attached [2025-09-24 01:25:27.058] mtd24 attached [2025-09-24 01:25:27.089] mtd28 attached [2025-09-24 01:25:27.089] ubi0:dml_code is mounted. [2025-09-24 01:25:27.122] RTNETLINK answers: File exists [2025-09-24 01:25:27.180] ubi1:textures is mounted. [2025-09-24 01:25:27.180] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:25:27.180] ubi2:animations is mounted. [2025-09-24 01:25:27.180] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:25:27.180] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:25:27.180] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:25:27.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:25:27.180] data.LB_FadeInType0=100 [2025-09-24 01:25:27.180] data.CHLH_FadeInType0=0 [2025-09-24 01:25:27.180] data.WU_FadeInDelay=0 [2025-09-24 01:25:27.180] max_time_out=0 [2025-09-24 01:25:27.180] No splash screen [2025-09-24 01:25:27.180] stop dss Done [2025-09-24 01:25:27.228] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:25:27.228] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:25:27.260] /dev/mem opened. [2025-09-24 01:25:27.260] Memory mapped at address 0xffff8683e000. [2025-09-24 01:25:27.260] Read at address 0x00600018 (0xffff8683e018): 0x00000000 [2025-09-24 01:25:27.260] Write at address 0x00600018 (0xffff8683e018): 0x00400040, readback 0x00400040 [2025-09-24 01:25:27.452] Loaded PowerVR consumer services. [2025-09-24 01:25:27.484] 512+0 records in [2025-09-24 01:25:27.484] 512+0 records out [2025-09-24 01:25:27.515] Starting syslogd/klogd: done [2025-09-24 01:25:27.531] Waiting data available... [2025-09-24 01:25:27.531] DML Start [2025-09-24 01:25:27.692] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:25:27.947] DML res1: 0 [2025-09-24 01:25:28.393] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:25:28.393] Read Success [2025-09-24 01:25:28.393] Verifying certificate... [2025-09-24 01:25:28.664] Verified OK [2025-09-24 01:25:28.680] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:25:30.375] Verified OK [2025-09-24 01:25:30.375] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:25:31.031] Verified OK [2025-09-24 01:25:31.031] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:25:33.605] fs.protected_hardlinks = 1 [2025-09-24 01:25:33.621] fs.protected_symlinks = 1 [2025-09-24 01:25:33.621] kernel.modules_disabled = 1 [2025-09-24 01:25:33.813] [2025-09-24 01:25:33.813] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:25:35.040] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:25:42.874] SBL1:1210.0.1.0 [2025-09-24 01:25:42.922] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:25:44.489] SBL2:1210.0.1.0 [2025-09-24 01:25:44.520] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:25:44.632] j-A [2025-09-24 01:25:52.009] The R5 Autosar Classic is running [2025-09-24 01:25:52.009] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:25:52.009] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:25:52.617] INIT: version 2.96 booting [2025-09-24 01:25:52.729] INIT: Entering runlevel: 5 [2025-09-24 01:25:52.873] mtd24 attached [2025-09-24 01:25:52.889] mtd28 attached [2025-09-24 01:25:52.905] mtd32 attached [2025-09-24 01:25:52.986] RTNETLINK answers: File exists [2025-09-24 01:25:52.986] ubi0:textures is mounted. [2025-09-24 01:25:52.986] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:25:52.986] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:25:52.986] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:25:52.986] ubi1:animations is mounted. [2025-09-24 01:25:52.986] ubi2:dml_code is mounted. [2025-09-24 01:25:52.986] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:25:52.986] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:25:53.017] data.LB_FadeInType0=100 [2025-09-24 01:25:53.017] data.CHLH_FadeInType0=0 [2025-09-24 01:25:53.017] data.WU_FadeInDelay=0 [2025-09-24 01:25:53.017] max_time_out=0 [2025-09-24 01:25:53.017] No splash screen [2025-09-24 01:25:53.017] stop dss Done [2025-09-24 01:25:53.065] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:25:53.102] /dev/mem opened. [2025-09-24 01:25:53.102] Memory mapped at address 0xffff9e7da000. [2025-09-24 01:25:53.102] Read at address 0x00600018 (0xffff9e7da018): 0x00000000 [2025-09-24 01:25:53.102] Write at address 0x00600018 (0xffff9e7da018): 0x00400040, readback 0x00400040 [2025-09-24 01:25:53.102] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:25:53.246] Loaded PowerVR consumer services. [2025-09-24 01:25:53.310] 512+0 records in [2025-09-24 01:25:53.310] 512+0 records out [2025-09-24 01:25:53.342] Starting syslogd/klogd: done [2025-09-24 01:25:53.374] Waiting data available... [2025-09-24 01:25:53.374] DML Start [2025-09-24 01:25:53.534] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:25:53.741] DML res1: 0 [2025-09-24 01:25:54.249] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:25:54.249] Read Success [2025-09-24 01:25:54.249] Verifying certificate... [2025-09-24 01:25:54.473] Verified OK [2025-09-24 01:25:54.489] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:25:56.152] Verified OK [2025-09-24 01:25:56.152] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:25:56.839] Verified OK [2025-09-24 01:25:56.860] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:25:59.546] fs.protected_hardlinks = 1 [2025-09-24 01:25:59.562] fs.protected_symlinks = 1 [2025-09-24 01:25:59.562] kernel.modules_disabled = 1 [2025-09-24 01:25:59.770] [2025-09-24 01:25:59.770] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:26:00.897] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:26:08.695] SBL1:1210.0.1.0 [2025-09-24 01:26:08.743] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:26:10.309] SBL2:1210.0.1.0 [2025-09-24 01:26:10.357] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:26:10.453] j-A [2025-09-24 01:26:17.810] The R5 Autosar Classic is running [2025-09-24 01:26:17.810] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:26:17.831] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:26:18.438] INIT: version 2.96 booting [2025-09-24 01:26:18.551] INIT: Entering runlevel: 5 [2025-09-24 01:26:18.711] mtd28 attached [2025-09-24 01:26:18.711] mtd32 attached [2025-09-24 01:26:18.727] mtd24 attached [2025-09-24 01:26:18.774] ubi0:animations is mounted. [2025-09-24 01:26:18.774] RTNETLINK answers: File exists [2025-09-24 01:26:18.833] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:26:18.833] ubi2:textures is mounted. [2025-09-24 01:26:18.833] ubi1:dml_code is mounted. [2025-09-24 01:26:18.833] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:26:18.833] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:26:18.833] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:26:18.833] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:26:18.833] data.LB_FadeInType0=100 [2025-09-24 01:26:18.833] data.CHLH_FadeInType0=0 [2025-09-24 01:26:18.833] data.WU_FadeInDelay=0 [2025-09-24 01:26:18.833] max_time_out=0 [2025-09-24 01:26:18.833] No splash screen [2025-09-24 01:26:18.833] stop dss Done [2025-09-24 01:26:18.906] /dev/mem opened. [2025-09-24 01:26:18.906] Memory mapped at address 0xffff9ba5b000. [2025-09-24 01:26:18.906] Read at address 0x00600018 (0xffff9ba5b018): 0x00000000 [2025-09-24 01:26:18.906] Write at address 0x00600018 (0xffff9ba5b018): 0x00400040, readback 0x00400040 [2025-09-24 01:26:18.906] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:26:18.939] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:26:19.067] Loaded PowerVR consumer services. [2025-09-24 01:26:19.131] 512+0 records in [2025-09-24 01:26:19.131] 512+0 records out [2025-09-24 01:26:19.163] Waiting data available... [2025-09-24 01:26:19.179] Starting syslogd/klogd: done [2025-09-24 01:26:19.194] DML Start [2025-09-24 01:26:19.370] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:26:19.610] DML res1: 0 [2025-09-24 01:26:20.046] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:26:20.046] Read Success [2025-09-24 01:26:20.046] Verifying certificate... [2025-09-24 01:26:20.271] Verified OK [2025-09-24 01:26:20.287] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:26:22.010] Verified OK [2025-09-24 01:26:22.010] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:26:22.671] Verified OK [2025-09-24 01:26:22.671] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:26:25.262] fs.protected_hardlinks = 1 [2025-09-24 01:26:25.278] fs.protected_symlinks = 1 [2025-09-24 01:26:25.278] kernel.modules_disabled = 1 [2025-09-24 01:26:25.469] [2025-09-24 01:26:25.469] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:26:26.699] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:26:34.510] SBL1:1210.0.1.0 [2025-09-24 01:26:34.558] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:26:36.125] SBL2:1210.0.1.0 [2025-09-24 01:26:36.157] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:26:36.269] j-A [2025-09-24 01:26:43.646] The R5 Autosar Classic is running [2025-09-24 01:26:43.646] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:26:43.646] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:26:44.254] INIT: version 2.96 booting [2025-09-24 01:26:44.366] INIT: Entering runlevel: 5 [2025-09-24 01:26:44.510] mtd24 attached [2025-09-24 01:26:44.541] mtd32 attached [2025-09-24 01:26:44.557] mtd28 attached [2025-09-24 01:26:44.557] ubi0:textures is mounted. [2025-09-24 01:26:44.589] RTNETLINK answers: File exists [2025-09-24 01:26:44.648] ubi1:dml_code is mounted. [2025-09-24 01:26:44.648] ubi2:animations is mounted. [2025-09-24 01:26:44.648] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:26:44.648] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:26:44.648] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:26:44.648] data.LB_FadeInType0=100 [2025-09-24 01:26:44.648] data.CHLH_FadeInType0=0 [2025-09-24 01:26:44.648] data.WU_FadeInDelay=0 [2025-09-24 01:26:44.648] max_time_out=0 [2025-09-24 01:26:44.648] No splash screen [2025-09-24 01:26:44.648] stop dss Done [2025-09-24 01:26:44.648] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:26:44.648] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:26:44.717] /dev/mem opened. [2025-09-24 01:26:44.717] Memory mapped at address 0xffffa5af6000. [2025-09-24 01:26:44.717] Read at address 0x00600018 (0xffffa5af6018): 0x00000000 [2025-09-24 01:26:44.717] Write at address 0x00600018 (0xffffa5af6018): 0x00400040, readback 0x00400040 [2025-09-24 01:26:44.733] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:26:44.749] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:26:44.925] Loaded PowerVR consumer services. [2025-09-24 01:26:44.956] 512+0 records in [2025-09-24 01:26:44.956] 512+0 records out [2025-09-24 01:26:44.988] Starting syslogd/klogd: done [2025-09-24 01:26:45.036] Waiting data available... [2025-09-24 01:26:45.036] DML Start [2025-09-24 01:26:45.244] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:26:45.500] DML res1: 0 [2025-09-24 01:26:45.850] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:26:45.850] Read Success [2025-09-24 01:26:45.850] Verifying certificate... [2025-09-24 01:26:46.138] Verified OK [2025-09-24 01:26:46.170] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:26:47.961] Verified OK [2025-09-24 01:26:47.961] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:26:48.617] Verified OK [2025-09-24 01:26:48.617] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:26:51.301] fs.protected_hardlinks = 1 [2025-09-24 01:26:51.301] fs.protected_symlinks = 1 [2025-09-24 01:26:51.301] kernel.modules_disabled = 1 [2025-09-24 01:26:51.477] [2025-09-24 01:26:51.477] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:26:52.578] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:27:00.354] SBL1:1210.0.1.0 [2025-09-24 01:27:00.386] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:27:01.970] SBL2:1210.0.1.0 [2025-09-24 01:27:02.002] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:27:02.114] j-A [2025-09-24 01:27:09.454] The R5 Autosar Classic is running [2025-09-24 01:27:09.479] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:27:09.479] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:27:10.087] INIT: version 2.96 booting [2025-09-24 01:27:10.199] INIT: Entering runlevel: 5 [2025-09-24 01:27:10.360] mtd24 attached [2025-09-24 01:27:10.360] mtd28 attached [2025-09-24 01:27:10.375] mtd32 attached [2025-09-24 01:27:10.391] ubi0:textures is mounted. [2025-09-24 01:27:10.423] RTNETLINK answers: File exists [2025-09-24 01:27:10.484] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:27:10.484] ubi1:animations is mounted. [2025-09-24 01:27:10.484] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:27:10.484] ubi2:dml_code is mounted. [2025-09-24 01:27:10.484] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:27:10.484] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:27:10.484] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:27:10.484] data.LB_FadeInType0=100 [2025-09-24 01:27:10.484] data.CHLH_FadeInType0=0 [2025-09-24 01:27:10.484] data.WU_FadeInDelay=0 [2025-09-24 01:27:10.484] max_time_out=0 [2025-09-24 01:27:10.484] No splash screen [2025-09-24 01:27:10.484] stop dss Done [2025-09-24 01:27:10.516] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:27:10.532] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:27:10.532] /dev/mem opened. [2025-09-24 01:27:10.565] Memory mapped at address 0xffff8a251000. [2025-09-24 01:27:10.565] Read at address 0x00600018 (0xffff8a251018): 0x00000000 [2025-09-24 01:27:10.565] Write at address 0x00600018 (0xffff8a251018): 0x00400040, readback 0x00400040 [2025-09-24 01:27:10.756] Loaded PowerVR consumer services. [2025-09-24 01:27:10.795] Waiting data available... [2025-09-24 01:27:10.795] 512+0 records in [2025-09-24 01:27:10.795] 512+0 records out [2025-09-24 01:27:10.811] Starting syslogd/klogd: done [2025-09-24 01:27:10.827] DML Start [2025-09-24 01:27:10.971] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:27:11.179] DML res1: 0 [2025-09-24 01:27:11.685] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:27:11.685] Read Success [2025-09-24 01:27:11.685] Verifying certificate... [2025-09-24 01:27:11.925] Verified OK [2025-09-24 01:27:11.941] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:27:13.476] Verified OK [2025-09-24 01:27:13.476] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:27:14.129] Verified OK [2025-09-24 01:27:14.129] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:27:16.895] fs.protected_hardlinks = 1 [2025-09-24 01:27:16.895] fs.protected_symlinks = 1 [2025-09-24 01:27:16.911] kernel.modules_disabled = 1 [2025-09-24 01:27:17.103] [2025-09-24 01:27:17.103] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:27:18.349] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:27:26.179] SBL1:1210.0.1.0 [2025-09-24 01:27:26.211] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:27:27.795] SBL2:1210.0.1.0 [2025-09-24 01:27:27.827] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:27:27.922] j-A [2025-09-24 01:27:35.278] The R5 Autosar Classic is running [2025-09-24 01:27:35.302] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:27:35.302] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:27:35.910] INIT: version 2.96 booting [2025-09-24 01:27:36.022] INIT: Entering runlevel: 5 [2025-09-24 01:27:36.182] mtd28 attached [2025-09-24 01:27:36.182] mtd24 attached [2025-09-24 01:27:36.198] mtd32 attached [2025-09-24 01:27:36.230] ubi0:animations is mounted. [2025-09-24 01:27:36.246] RTNETLINK answers: File exists [2025-09-24 01:27:36.313] ubi1:textures is mounted. [2025-09-24 01:27:36.313] ubi2:dml_code is mounted. [2025-09-24 01:27:36.313] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:27:36.313] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:27:36.313] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:27:36.313] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:27:36.313] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:27:36.313] data.LB_FadeInType0=100 [2025-09-24 01:27:36.313] data.CHLH_FadeInType0=0 [2025-09-24 01:27:36.313] data.WU_FadeInDelay=0 [2025-09-24 01:27:36.313] max_time_out=0 [2025-09-24 01:27:36.313] No splash screen [2025-09-24 01:27:36.313] stop dss Done [2025-09-24 01:27:36.329] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:27:36.372] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:27:36.372] /dev/mem opened. [2025-09-24 01:27:36.372] Memory mapped at address 0xffffa4455000. [2025-09-24 01:27:36.372] Read at address 0x00600018 (0xffffa4455018): 0x00000000 [2025-09-24 01:27:36.372] Write at address 0x00600018 (0xffffa4455018): 0x00400040, readback 0x00400040 [2025-09-24 01:27:36.564] Loaded PowerVR consumer services. [2025-09-24 01:27:36.625] 512+0 records in [2025-09-24 01:27:36.625] 512+0 records out [2025-09-24 01:27:36.625] Waiting data available... [2025-09-24 01:27:36.641] Starting syslogd/klogd: done [2025-09-24 01:27:36.656] DML Start [2025-09-24 01:27:36.849] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:27:37.057] DML res1: 0 [2025-09-24 01:27:37.520] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:27:37.520] Read Success [2025-09-24 01:27:37.520] Verifying certificate... [2025-09-24 01:27:37.807] Verified OK [2025-09-24 01:27:37.823] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:27:39.580] Verified OK [2025-09-24 01:27:39.580] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:27:40.172] Verified OK [2025-09-24 01:27:40.172] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:27:42.699] fs.protected_hardlinks = 1 [2025-09-24 01:27:42.699] fs.protected_symlinks = 1 [2025-09-24 01:27:42.715] kernel.modules_disabled = 1 [2025-09-24 01:27:42.906] [2025-09-24 01:27:42.906] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:27:44.153] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:27:52.000] SBL1:1210.0.1.0 [2025-09-24 01:27:52.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:27:53.615] SBL2:1210.0.1.0 [2025-09-24 01:27:53.648] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:27:53.759] j-A [2025-09-24 01:28:01.131] The R5 Autosar Classic is running [2025-09-24 01:28:01.131] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:28:01.131] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:28:01.739] INIT: version 2.96 booting [2025-09-24 01:28:01.851] INIT: Entering runlevel: 5 [2025-09-24 01:28:01.994] mtd28 attached [2025-09-24 01:28:02.010] mtd24 attached [2025-09-24 01:28:02.026] mtd32 attached [2025-09-24 01:28:02.042] ubi0:animations is mounted. [2025-09-24 01:28:02.074] RTNETLINK answers: File exists [2025-09-24 01:28:02.074] ubi2:dml_code is mounted. [2025-09-24 01:28:02.138] ubi1:textures is mounted. [2025-09-24 01:28:02.138] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:28:02.138] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:28:02.138] data.LB_FadeInType0=100 [2025-09-24 01:28:02.138] data.CHLH_FadeInType0=0 [2025-09-24 01:28:02.138] data.WU_FadeInDelay=0 [2025-09-24 01:28:02.138] max_time_out=0 [2025-09-24 01:28:02.138] No splash screen [2025-09-24 01:28:02.138] stop dss Done [2025-09-24 01:28:02.138] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:28:02.138] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:28:02.138] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:28:02.170] /dev/mem opened. [2025-09-24 01:28:02.170] Memory mapped at address 0xffffb75cf000. [2025-09-24 01:28:02.195] Read at address 0x00600018 (0xffffb75cf018): 0x00000000 [2025-09-24 01:28:02.195] Write at address 0x00600018 (0xffffb75cf018): 0x00400040, readback 0x00400040 [2025-09-24 01:28:02.241] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:28:02.241] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:28:02.305] Loaded PowerVR consumer services. [2025-09-24 01:28:02.433] 512+0 records in [2025-09-24 01:28:02.433] 512+0 records out [2025-09-24 01:28:02.449] Waiting data available... [2025-09-24 01:28:02.481] Starting syslogd/klogd: done [2025-09-24 01:28:02.497] DML Start [2025-09-24 01:28:02.705] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:28:02.929] DML res1: 0 [2025-09-24 01:28:03.337] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:28:03.337] Read Success [2025-09-24 01:28:03.337] Verifying certificate... [2025-09-24 01:28:03.593] Verified OK [2025-09-24 01:28:03.608] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:28:05.401] Verified OK [2025-09-24 01:28:05.401] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:28:05.955] Verified OK [2025-09-24 01:28:05.955] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:28:08.417] fs.protected_hardlinks = 1 [2025-09-24 01:28:08.417] fs.protected_symlinks = 1 [2025-09-24 01:28:08.417] kernel.modules_disabled = 1 [2025-09-24 01:28:08.608] [2025-09-24 01:28:08.608] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:28:10.041] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:28:17.810] SBL1:1210.0.1.0 [2025-09-24 01:28:17.858] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:28:19.424] SBL2:1210.0.1.0 [2025-09-24 01:28:19.456] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:28:19.569] j-A [2025-09-24 01:28:26.941] The R5 Autosar Classic is running [2025-09-24 01:28:26.941] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:28:26.941] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:28:27.548] INIT: version 2.96 booting [2025-09-24 01:28:27.645] INIT: Entering runlevel: 5 [2025-09-24 01:28:27.804] mtd32 attached [2025-09-24 01:28:27.820] mtd24 attached [2025-09-24 01:28:27.836] mtd28 attached [2025-09-24 01:28:27.930] RTNETLINK answers: File exists [2025-09-24 01:28:27.930] ubi0:dml_code is mounted. [2025-09-24 01:28:27.930] ubi1:textures is mounted. [2025-09-24 01:28:27.930] ubi2:animations is mounted. [2025-09-24 01:28:27.930] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:28:27.930] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:28:27.930] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:28:27.930] data.LB_FadeInType0=100 [2025-09-24 01:28:27.930] data.CHLH_FadeInType0=0 [2025-09-24 01:28:27.930] data.WU_FadeInDelay=0 [2025-09-24 01:28:27.930] max_time_out=0 [2025-09-24 01:28:27.930] No splash screen [2025-09-24 01:28:27.930] stop dss Done [2025-09-24 01:28:27.930] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:28:27.930] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:28:27.988] /dev/mem opened. [2025-09-24 01:28:27.988] Memory mapped at address 0xffff87543000. [2025-09-24 01:28:27.988] Read at address 0x00600018 (0xffff87543018): 0x00000000 [2025-09-24 01:28:27.988] Write at address 0x00600018 (0xffff87543018): 0x00400040, readback 0x00400040 [2025-09-24 01:28:28.035] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:28:28.051] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:28:28.235] Loaded PowerVR consumer services. [2025-09-24 01:28:28.235] 512+0 records in [2025-09-24 01:28:28.235] 512+0 records out [2025-09-24 01:28:28.250] Starting syslogd/klogd: done [2025-09-24 01:28:28.314] Waiting data available... [2025-09-24 01:28:28.314] DML Start [2025-09-24 01:28:28.522] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:28:28.747] DML res1: 0 [2025-09-24 01:28:29.157] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:28:29.157] Read Success [2025-09-24 01:28:29.157] Verifying certificate... [2025-09-24 01:28:29.397] Verified OK [2025-09-24 01:28:29.429] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:28:31.076] Verified OK [2025-09-24 01:28:31.097] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:28:31.683] Verified OK [2025-09-24 01:28:31.683] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:28:34.270] fs.protected_hardlinks = 1 [2025-09-24 01:28:34.270] fs.protected_symlinks = 1 [2025-09-24 01:28:34.270] kernel.modules_disabled = 1 [2025-09-24 01:28:34.447] [2025-09-24 01:28:34.447] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:28:35.770] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:28:43.630] SBL1:1210.0.1.0 [2025-09-24 01:28:43.662] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:28:45.246] SBL2:1210.0.1.0 [2025-09-24 01:28:45.278] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:28:45.389] j-A [2025-09-24 01:28:52.759] The R5 Autosar Classic is running [2025-09-24 01:28:52.759] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:28:52.759] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:28:53.367] INIT: version 2.96 booting [2025-09-24 01:28:53.478] INIT: Entering runlevel: 5 [2025-09-24 01:28:53.623] mtd24 attached [2025-09-24 01:28:53.639] mtd28 attached [2025-09-24 01:28:53.654] mtd32 attached [2025-09-24 01:28:53.670] ubi0:textures is mounted. [2025-09-24 01:28:53.702] RTNETLINK answers: File exists [2025-09-24 01:28:53.756] ubi1:animations is mounted. [2025-09-24 01:28:53.756] ubi2:dml_code is mounted. [2025-09-24 01:28:53.756] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:28:53.756] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:28:53.756] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:28:53.756] data.LB_FadeInType0=100 [2025-09-24 01:28:53.756] data.CHLH_FadeInType0=0 [2025-09-24 01:28:53.756] data.WU_FadeInDelay=0 [2025-09-24 01:28:53.756] max_time_out=0 [2025-09-24 01:28:53.756] No splash screen [2025-09-24 01:28:53.756] stop dss Done [2025-09-24 01:28:53.756] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:28:53.756] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:28:53.825] /dev/mem opened. [2025-09-24 01:28:53.825] Memory mapped at address 0xffffa215b000. [2025-09-24 01:28:53.825] Read at address 0x00600018 (0xffffa215b018): 0x00000000 [2025-09-24 01:28:53.825] Write at address 0x00600018 (0xffffa215b018): 0x00400040, readback 0x00400040 [2025-09-24 01:28:53.887] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:28:53.887] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:28:54.062] Loaded PowerVR consumer services. [2025-09-24 01:28:54.078] 512+0 records in [2025-09-24 01:28:54.078] 512+0 records out [2025-09-24 01:28:54.094] Waiting data available... [2025-09-24 01:28:54.110] Starting syslogd/klogd: done [2025-09-24 01:28:54.126] DML Start [2025-09-24 01:28:54.302] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:28:54.510] DML res1: 0 [2025-09-24 01:28:55.003] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:28:55.003] Read Success [2025-09-24 01:28:55.003] Verifying certificate... [2025-09-24 01:28:55.274] Verified OK [2025-09-24 01:28:55.290] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:28:56.880] Verified OK [2025-09-24 01:28:56.880] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:28:57.447] Verified OK [2025-09-24 01:28:57.447] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:29:00.197] fs.protected_hardlinks = 1 [2025-09-24 01:29:00.197] fs.protected_symlinks = 1 [2025-09-24 01:29:00.213] kernel.modules_disabled = 1 [2025-09-24 01:29:00.405] [2025-09-24 01:29:00.405] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:29:01.621] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:29:09.458] SBL1:1210.0.1.0 [2025-09-24 01:29:09.507] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:29:11.073] SBL2:1210.0.1.0 [2025-09-24 01:29:11.120] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:29:11.217] j-A [2025-09-24 01:29:18.571] The R5 Autosar Classic is running [2025-09-24 01:29:18.593] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:29:18.593] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:29:19.201] INIT: version 2.96 booting [2025-09-24 01:29:19.312] INIT: Entering runlevel: 5 [2025-09-24 01:29:19.472] mtd24 attached [2025-09-24 01:29:19.472] mtd28 attached [2025-09-24 01:29:19.488] mtd32 attached [2025-09-24 01:29:19.536] ubi0:textures is mounted. [2025-09-24 01:29:19.536] RTNETLINK answers: File exists [2025-09-24 01:29:19.592] ubi1:animations is mounted. [2025-09-24 01:29:19.592] ubi2:dml_code is mounted. [2025-09-24 01:29:19.592] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:29:19.592] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:29:19.592] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:29:19.592] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:29:19.592] data.LB_FadeInType0=100 [2025-09-24 01:29:19.592] data.CHLH_FadeInType0=0 [2025-09-24 01:29:19.592] data.WU_FadeInDelay=0 [2025-09-24 01:29:19.592] max_time_out=0 [2025-09-24 01:29:19.592] No splash screen [2025-09-24 01:29:19.592] stop dss Done [2025-09-24 01:29:19.592] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:29:19.676] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:29:19.676] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:29:19.676] /dev/mem opened. [2025-09-24 01:29:19.676] Memory mapped at address 0xffffa6c76000. [2025-09-24 01:29:19.676] Read at address 0x00600018 (0xffffa6c76018): 0x00000000 [2025-09-24 01:29:19.676] Write at address 0x00600018 (0xffffa6c76018): 0x00400040, readback 0x00400040 [2025-09-24 01:29:19.835] Loaded PowerVR consumer services. [2025-09-24 01:29:19.867] 512+0 records in [2025-09-24 01:29:19.867] 512+0 records out [2025-09-24 01:29:19.915] Waiting data available... [2025-09-24 01:29:19.915] Starting syslogd/klogd: done [2025-09-24 01:29:19.947] DML Start [2025-09-24 01:29:20.123] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:29:20.363] DML res1: 0 [2025-09-24 01:29:21.034] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:29:21.059] Read Success [2025-09-24 01:29:21.059] Verifying certificate... [2025-09-24 01:29:21.315] Verified OK [2025-09-24 01:29:21.347] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:29:23.097] Verified OK [2025-09-24 01:29:23.097] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:29:23.653] Verified OK [2025-09-24 01:29:23.653] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:29:26.084] fs.protected_hardlinks = 1 [2025-09-24 01:29:26.100] fs.protected_symlinks = 1 [2025-09-24 01:29:26.100] kernel.modules_disabled = 1 [2025-09-24 01:29:26.291] [2025-09-24 01:29:26.291] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:29:27.435] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:29:35.274] SBL1:1210.0.1.0 [2025-09-24 01:29:35.322] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 01:29:36.889] SBL2:1210.0.1.0 [2025-09-24 01:29:36.937] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:29:37.033] j-A [2025-09-24 01:29:44.388] The R5 Autosar Classic is running [2025-09-24 01:29:44.410] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:29:44.410] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:29:45.017] INIT: version 2.96 booting [2025-09-24 01:29:45.129] INIT: Entering runlevel: 5 [2025-09-24 01:29:45.274] mtd24 attached [2025-09-24 01:29:45.289] mtd28 attached [2025-09-24 01:29:45.305] mtd32 attached [2025-09-24 01:29:45.321] ubi0:textures is mounted. [2025-09-24 01:29:45.353] RTNETLINK answers: File exists [2025-09-24 01:29:45.353] ubi1:animations is mounted. [2025-09-24 01:29:45.409] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:29:45.409] ubi2:dml_code is mounted. [2025-09-24 01:29:45.409] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:29:45.409] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:29:45.409] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:29:45.409] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:29:45.409] data.LB_FadeInType0=100 [2025-09-24 01:29:45.409] data.CHLH_FadeInType0=0 [2025-09-24 01:29:45.409] data.WU_FadeInDelay=0 [2025-09-24 01:29:45.409] max_time_out=0 [2025-09-24 01:29:45.409] No splash screen [2025-09-24 01:29:45.409] stop dss Done [2025-09-24 01:29:45.457] /dev/mem opened. [2025-09-24 01:29:45.457] Memory mapped at address 0xffff7ff92000. [2025-09-24 01:29:45.483] Read at address 0x00600018 (0xffff7ff92018): 0x00000000 [2025-09-24 01:29:45.483] Write at address 0x00600018 (0xffff7ff92018): 0x00400040, readback 0x00400040 [2025-09-24 01:29:45.483] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:29:45.499] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:29:45.642] Loaded PowerVR consumer services. [2025-09-24 01:29:45.720] 512+0 records in [2025-09-24 01:29:45.720] 512+0 records out [2025-09-24 01:29:45.720] Waiting data available... [2025-09-24 01:29:45.736] Starting syslogd/klogd: done [2025-09-24 01:29:45.752] DML Start [2025-09-24 01:29:45.912] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:29:46.136] DML res1: 0 [2025-09-24 01:29:46.599] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:29:46.620] Read Success [2025-09-24 01:29:46.620] Verifying certificate... [2025-09-24 01:29:46.860] Verified OK [2025-09-24 01:29:46.892] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:29:48.722] Verified OK [2025-09-24 01:29:48.722] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:29:49.271] Verified OK [2025-09-24 01:29:49.271] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:29:51.735] fs.protected_hardlinks = 1 [2025-09-24 01:29:51.735] fs.protected_symlinks = 1 [2025-09-24 01:29:51.750] kernel.modules_disabled = 1 [2025-09-24 01:29:51.942] [2025-09-24 01:29:51.942] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:29:53.269] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:30:01.122] SBL1:1210.0.1.0 [2025-09-24 01:30:01.170] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:30:02.736] SBL2:1210.0.1.0 [2025-09-24 01:30:02.768] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:30:02.880] j-A [2025-09-24 01:30:10.252] The R5 Autosar Classic is running [2025-09-24 01:30:10.252] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:30:10.252] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:30:10.860] INIT: version 2.96 booting [2025-09-24 01:30:10.972] INIT: Entering runlevel: 5 [2025-09-24 01:30:11.116] mtd24 attached [2025-09-24 01:30:11.132] mtd28 attached [2025-09-24 01:30:11.147] mtd32 attached [2025-09-24 01:30:11.163] ubi0:textures is mounted. [2025-09-24 01:30:11.195] ubi1:animations is mounted. [2025-09-24 01:30:11.195] RTNETLINK answers: File exists [2025-09-24 01:30:11.231] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:30:11.231] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:30:11.231] ubi2:dml_code is mounted. [2025-09-24 01:30:11.231] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:30:11.231] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:30:11.231] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:30:11.231] data.LB_FadeInType0=100 [2025-09-24 01:30:11.252] data.CHLH_FadeInType0=0 [2025-09-24 01:30:11.252] data.WU_FadeInDelay=0 [2025-09-24 01:30:11.252] max_time_out=0 [2025-09-24 01:30:11.252] No splash screen [2025-09-24 01:30:11.252] stop dss Done [2025-09-24 01:30:11.336] /dev/mem opened. [2025-09-24 01:30:11.336] Memory mapped at address 0xffffb3187000. [2025-09-24 01:30:11.336] Read at address 0x00600018 (0xffffb3187018): 0x00000000 [2025-09-24 01:30:11.336] Write at address 0x00600018 (0xffffb3187018): 0x00400040, readback 0x00400040 [2025-09-24 01:30:11.336] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:30:11.352] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:30:11.511] Loaded PowerVR consumer services. [2025-09-24 01:30:11.543] 512+0 records in [2025-09-24 01:30:11.543] 512+0 records out [2025-09-24 01:30:11.576] Waiting data available... [2025-09-24 01:30:11.592] Starting syslogd/klogd: done [2025-09-24 01:30:11.608] DML Start [2025-09-24 01:30:11.799] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:30:12.007] DML res1: 0 [2025-09-24 01:30:12.455] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:30:12.476] Read Success [2025-09-24 01:30:12.476] Verifying certificate... [2025-09-24 01:30:12.716] Verified OK [2025-09-24 01:30:12.732] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:30:14.435] Verified OK [2025-09-24 01:30:14.435] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:30:15.083] Verified OK [2025-09-24 01:30:15.083] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:30:17.722] fs.protected_hardlinks = 1 [2025-09-24 01:30:17.722] fs.protected_symlinks = 1 [2025-09-24 01:30:17.738] kernel.modules_disabled = 1 [2025-09-24 01:30:17.930] [2025-09-24 01:30:17.930] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:30:19.108] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:30:26.919] SBL1:1210.0.1.0 [2025-09-24 01:30:26.967] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:30:28.534] SBL2:1210.0.1.0 [2025-09-24 01:30:28.566] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:30:28.678] j-A [2025-09-24 01:30:36.053] The R5 Autosar Classic is running [2025-09-24 01:30:36.053] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:30:36.053] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:30:36.661] INIT: version 2.96 booting [2025-09-24 01:30:36.772] INIT: Entering runlevel: 5 [2025-09-24 01:30:36.933] mtd28 attached [2025-09-24 01:30:36.933] mtd24 attached [2025-09-24 01:30:36.949] mtd32 attached [2025-09-24 01:30:36.997] ubi0:animations is mounted. [2025-09-24 01:30:36.997] RTNETLINK answers: File exists [2025-09-24 01:30:37.057] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:30:37.057] ubi1:textures is mounted. [2025-09-24 01:30:37.057] ubi2:dml_code is mounted. [2025-09-24 01:30:37.057] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:30:37.057] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:30:37.057] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:30:37.057] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:30:37.057] data.LB_FadeInType0=100 [2025-09-24 01:30:37.057] data.CHLH_FadeInType0=0 [2025-09-24 01:30:37.057] data.WU_FadeInDelay=0 [2025-09-24 01:30:37.057] max_time_out=0 [2025-09-24 01:30:37.057] No splash screen [2025-09-24 01:30:37.057] stop dss Done [2025-09-24 01:30:37.104] /dev/mem opened. [2025-09-24 01:30:37.104] Memory mapped at address 0xffff8b908000. [2025-09-24 01:30:37.136] Read at address 0x00600018 (0xffff8b908018): 0x00000000 [2025-09-24 01:30:37.136] Write at address 0x00600018 (0xffff8b908018): 0x00400040, readback 0x00400040 [2025-09-24 01:30:37.136] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:30:37.136] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:30:37.248] Loaded PowerVR consumer services. [2025-09-24 01:30:37.388] Waiting data available... [2025-09-24 01:30:37.388] 512+0 records in [2025-09-24 01:30:37.388] 512+0 records out [2025-09-24 01:30:37.404] Starting syslogd/klogd: done [2025-09-24 01:30:37.420] DML Start [2025-09-24 01:30:37.628] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:30:37.852] DML res1: 0 [2025-09-24 01:30:38.258] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:30:38.258] Read Success [2025-09-24 01:30:38.258] Verifying certificate... [2025-09-24 01:30:38.546] Verified OK [2025-09-24 01:30:38.578] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:30:40.112] Verified OK [2025-09-24 01:30:40.134] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:30:40.756] Verified OK [2025-09-24 01:30:40.756] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:30:43.490] fs.protected_hardlinks = 1 [2025-09-24 01:30:43.506] fs.protected_symlinks = 1 [2025-09-24 01:30:43.506] kernel.modules_disabled = 1 [2025-09-24 01:30:43.697] [2025-09-24 01:30:43.697] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:30:44.934] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:30:52.750] SBL1:1210.0.1.0 [2025-09-24 01:30:52.782] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:30:54.366] SBL2:1210.0.1.0 [2025-09-24 01:30:54.398] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:30:54.493] j-A [2025-09-24 01:31:01.849] The R5 Autosar Classic is running [2025-09-24 01:31:01.873] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:31:01.873] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:31:02.481] INIT: version 2.96 booting [2025-09-24 01:31:02.592] INIT: Entering runlevel: 5 [2025-09-24 01:31:02.753] mtd28 attached [2025-09-24 01:31:02.753] mtd24 attached [2025-09-24 01:31:02.769] mtd32 attached [2025-09-24 01:31:02.872] ubi0:animations is mounted. [2025-09-24 01:31:02.872] RTNETLINK answers: File exists [2025-09-24 01:31:02.872] ubi1:textures is mounted. [2025-09-24 01:31:02.872] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:31:02.872] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:31:02.872] ubi2:dml_code is mounted. [2025-09-24 01:31:02.872] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:31:02.872] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:31:02.872] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:31:02.872] data.LB_FadeInType0=100 [2025-09-24 01:31:02.872] data.CHLH_FadeInType0=0 [2025-09-24 01:31:02.872] data.WU_FadeInDelay=0 [2025-09-24 01:31:02.872] max_time_out=0 [2025-09-24 01:31:02.872] No splash screen [2025-09-24 01:31:02.872] stop dss Done [2025-09-24 01:31:02.910] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:31:02.910] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:31:02.942] /dev/mem opened. [2025-09-24 01:31:02.942] Memory mapped at address 0xffffadeb3000. [2025-09-24 01:31:02.942] Read at address 0x00600018 (0xffffadeb3018): 0x00000000 [2025-09-24 01:31:02.942] Write at address 0x00600018 (0xffffadeb3018): 0x00400040, readback 0x00400040 [2025-09-24 01:31:03.038] Loaded PowerVR consumer services. [2025-09-24 01:31:03.190] 512+0 records in [2025-09-24 01:31:03.190] 512+0 records out [2025-09-24 01:31:03.190] Waiting data available... [2025-09-24 01:31:03.206] Starting syslogd/klogd: done [2025-09-24 01:31:03.221] DML Start [2025-09-24 01:31:03.429] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:31:03.605] DML res1: 0 [2025-09-24 01:31:04.068] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:31:04.068] Read Success [2025-09-24 01:31:04.068] Verifying certificate... [2025-09-24 01:31:04.308] Verified OK [2025-09-24 01:31:04.324] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:31:05.916] Verified OK [2025-09-24 01:31:05.916] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:31:06.459] Verified OK [2025-09-24 01:31:06.480] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:31:09.294] fs.protected_hardlinks = 1 [2025-09-24 01:31:09.294] fs.protected_symlinks = 1 [2025-09-24 01:31:09.310] kernel.modules_disabled = 1 [2025-09-24 01:31:09.502] [2025-09-24 01:31:09.502] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:31:10.731] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:31:18.559] SBL1:1210.0.1.0 [2025-09-24 01:31:18.607] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:31:20.174] SBL2:1210.0.1.0 [2025-09-24 01:31:20.206] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:31:20.318] j-A [2025-09-24 01:31:27.693] The R5 Autosar Classic is running [2025-09-24 01:31:27.693] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:31:27.693] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:31:28.300] INIT: version 2.96 booting [2025-09-24 01:31:28.412] INIT: Entering runlevel: 5 [2025-09-24 01:31:28.572] mtd24 attached [2025-09-24 01:31:28.572] mtd28 attached [2025-09-24 01:31:28.603] mtd32 attached [2025-09-24 01:31:28.635] ubi0:textures is mounted. [2025-09-24 01:31:28.704] RTNETLINK answers: File exists [2025-09-24 01:31:28.704] ubi1:animations is mounted. [2025-09-24 01:31:28.704] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:31:28.704] ubi2:dml_code is mounted. [2025-09-24 01:31:28.704] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:31:28.704] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:31:28.704] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:31:28.704] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:31:28.704] data.LB_FadeInType0=100 [2025-09-24 01:31:28.704] data.CHLH_FadeInType0=0 [2025-09-24 01:31:28.704] data.WU_FadeInDelay=0 [2025-09-24 01:31:28.704] max_time_out=0 [2025-09-24 01:31:28.704] No splash screen [2025-09-24 01:31:28.704] stop dss Done [2025-09-24 01:31:28.752] /dev/mem opened. [2025-09-24 01:31:28.752] Memory mapped at address 0xffffaead1000. [2025-09-24 01:31:28.778] Read at address 0x00600018 (0xffffaead1018): 0x00000000 [2025-09-24 01:31:28.778] Write at address 0x00600018 (0xffffaead1018): 0x00400040, readback 0x00400040 [2025-09-24 01:31:28.778] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:31:28.794] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:31:28.953] Loaded PowerVR consumer services. [2025-09-24 01:31:28.986] 512+0 records in [2025-09-24 01:31:28.986] 512+0 records out [2025-09-24 01:31:29.034] Starting syslogd/klogd: done [2025-09-24 01:31:29.050] Waiting data available... [2025-09-24 01:31:29.050] DML Start [2025-09-24 01:31:29.241] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:31:29.449] DML res1: 0 [2025-09-24 01:31:29.943] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:31:29.943] Read Success [2025-09-24 01:31:29.943] Verifying certificate... [2025-09-24 01:31:30.182] Verified OK [2025-09-24 01:31:30.198] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:31:31.775] Verified OK [2025-09-24 01:31:31.775] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:31:32.430] Verified OK [2025-09-24 01:31:32.430] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:31:35.116] fs.protected_hardlinks = 1 [2025-09-24 01:31:35.116] fs.protected_symlinks = 1 [2025-09-24 01:31:35.132] kernel.modules_disabled = 1 [2025-09-24 01:31:35.324] [2025-09-24 01:31:35.324] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:31:36.576] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:31:44.366] SBL1:1210.0.1.0 [2025-09-24 01:31:44.414] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:31:45.981] SBL2:1210.0.1.0 [2025-09-24 01:31:46.013] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:31:46.124] j-A [2025-09-24 01:31:53.499] The R5 Autosar Classic is running [2025-09-24 01:31:53.499] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:31:53.499] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:31:54.106] INIT: version 2.96 booting [2025-09-24 01:31:54.219] INIT: Entering runlevel: 5 [2025-09-24 01:31:54.362] mtd28 attached [2025-09-24 01:31:54.378] mtd32 attached [2025-09-24 01:31:54.394] mtd24 attached [2025-09-24 01:31:54.410] ubi0:animations is mounted. [2025-09-24 01:31:54.480] RTNETLINK answers: File exists [2025-09-24 01:31:54.480] ubi1:dml_code is mounted. [2025-09-24 01:31:54.480] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:31:54.480] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:31:54.480] ubi2:textures is mounted. [2025-09-24 01:31:54.480] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:31:54.480] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:31:54.480] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:31:54.503] data.LB_FadeInType0=100 [2025-09-24 01:31:54.503] data.CHLH_FadeInType0=0 [2025-09-24 01:31:54.503] data.WU_FadeInDelay=0 [2025-09-24 01:31:54.503] max_time_out=0 [2025-09-24 01:31:54.503] No splash screen [2025-09-24 01:31:54.503] stop dss Done [2025-09-24 01:31:54.535] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:31:54.551] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:31:54.551] /dev/mem opened. [2025-09-24 01:31:54.577] Memory mapped at address 0xffff88a85000. [2025-09-24 01:31:54.577] Read at address 0x00600018 (0xffff88a85018): 0x00000000 [2025-09-24 01:31:54.577] Write at address 0x00600018 (0xffff88a85018): 0x00400040, readback 0x00400040 [2025-09-24 01:31:54.672] Loaded PowerVR consumer services. [2025-09-24 01:31:54.784] 512+0 records in [2025-09-24 01:31:54.800] 512+0 records out [2025-09-24 01:31:54.817] Waiting data available... [2025-09-24 01:31:54.833] Starting syslogd/klogd: done [2025-09-24 01:31:54.865] DML Start [2025-09-24 01:31:55.056] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:31:55.296] DML res1: 0 [2025-09-24 01:31:55.708] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:31:55.708] Read Success [2025-09-24 01:31:55.708] Verifying certificate... [2025-09-24 01:31:55.932] Verified OK [2025-09-24 01:31:55.964] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:31:57.685] Verified OK [2025-09-24 01:31:57.685] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:31:58.309] Verified OK [2025-09-24 01:31:58.332] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:32:00.907] fs.protected_hardlinks = 1 [2025-09-24 01:32:00.923] fs.protected_symlinks = 1 [2025-09-24 01:32:00.923] kernel.modules_disabled = 1 [2025-09-24 01:32:01.131] [2025-09-24 01:32:01.131] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:32:02.377] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:32:10.164] SBL1:1210.0.1.0 [2025-09-24 01:32:10.212] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:32:11.779] SBL2:1210.0.1.0 [2025-09-24 01:32:11.826] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:32:11.922] j-A [2025-09-24 01:32:19.277] The R5 Autosar Classic is running [2025-09-24 01:32:19.299] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:32:19.299] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:32:19.907] INIT: version 2.96 booting [2025-09-24 01:32:20.019] INIT: Entering runlevel: 5 [2025-09-24 01:32:20.163] mtd24 attached [2025-09-24 01:32:20.179] mtd28 attached [2025-09-24 01:32:20.195] mtd32 attached [2025-09-24 01:32:20.299] ubi0:textures is mounted. [2025-09-24 01:32:20.299] ubi1:animations is mounted. [2025-09-24 01:32:20.299] RTNETLINK answers: File exists [2025-09-24 01:32:20.299] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:32:20.299] ubi2:dml_code is mounted. [2025-09-24 01:32:20.299] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:32:20.299] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:32:20.299] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:32:20.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:32:20.299] data.LB_FadeInType0=100 [2025-09-24 01:32:20.299] data.CHLH_FadeInType0=0 [2025-09-24 01:32:20.299] data.WU_FadeInDelay=0 [2025-09-24 01:32:20.299] max_time_out=0 [2025-09-24 01:32:20.299] No splash screen [2025-09-24 01:32:20.299] stop dss Done [2025-09-24 01:32:20.390] /dev/mem opened. [2025-09-24 01:32:20.390] Memory mapped at address 0xffffa443d000. [2025-09-24 01:32:20.390] Read at address 0x00600018 (0xffffa443d018): 0x00000000 [2025-09-24 01:32:20.390] Write at address 0x00600018 (0xffffa443d018): 0x00400040, readback 0x00400040 [2025-09-24 01:32:20.390] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:32:20.390] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:32:20.470] Loaded PowerVR consumer services. [2025-09-24 01:32:20.598] 512+0 records in [2025-09-24 01:32:20.598] 512+0 records out [2025-09-24 01:32:20.613] Waiting data available... [2025-09-24 01:32:20.645] Starting syslogd/klogd: done [2025-09-24 01:32:20.661] DML Start [2025-09-24 01:32:20.853] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:32:21.078] DML res1: 0 [2025-09-24 01:32:21.493] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:32:21.509] Read Success [2025-09-24 01:32:21.509] Verifying certificate... [2025-09-24 01:32:21.781] Verified OK [2025-09-24 01:32:21.798] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:32:23.514] Verified OK [2025-09-24 01:32:23.514] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:32:24.055] Verified OK [2025-09-24 01:32:24.055] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:32:26.678] fs.protected_hardlinks = 1 [2025-09-24 01:32:26.694] fs.protected_symlinks = 1 [2025-09-24 01:32:26.694] kernel.modules_disabled = 1 [2025-09-24 01:32:26.887] [2025-09-24 01:32:26.887] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:32:28.188] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:32:35.990] SBL1:1210.0.1.0 [2025-09-24 01:32:36.038] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:32:37.605] SBL2:1210.0.1.0 [2025-09-24 01:32:37.637] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:32:37.748] j-A [2025-09-24 01:32:45.123] The R5 Autosar Classic is running [2025-09-24 01:32:45.123] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:32:45.123] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:32:45.731] INIT: version 2.96 booting [2025-09-24 01:32:45.843] INIT: Entering runlevel: 5 [2025-09-24 01:32:46.003] mtd28 attached [2025-09-24 01:32:46.003] mtd32 attached [2025-09-24 01:32:46.019] mtd24 attached [2025-09-24 01:32:46.035] ubi0:animations is mounted. [2025-09-24 01:32:46.067] ubi1:dml_code is mounted. [2025-09-24 01:32:46.067] RTNETLINK answers: File exists [2025-09-24 01:32:46.094] ubi2:textures is mounted. [2025-09-24 01:32:46.094] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:32:46.094] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:32:46.094] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:32:46.128] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:32:46.128] data.LB_FadeInType0=100 [2025-09-24 01:32:46.128] data.CHLH_FadeInType0=0 [2025-09-24 01:32:46.128] data.WU_FadeInDelay=0 [2025-09-24 01:32:46.128] max_time_out=0 [2025-09-24 01:32:46.128] No splash screen [2025-09-24 01:32:46.128] stop dss Done [2025-09-24 01:32:46.128] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:32:46.208] /dev/mem opened. [2025-09-24 01:32:46.208] Memory mapped at address 0xffffa2045000. [2025-09-24 01:32:46.208] Read at address 0x00600018 (0xffffa2045018): 0x00000000 [2025-09-24 01:32:46.208] Write at address 0x00600018 (0xffffa2045018): 0x00400040, readback 0x00400040 [2025-09-24 01:32:46.208] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:32:46.208] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:32:46.368] Loaded PowerVR consumer services. [2025-09-24 01:32:46.417] 512+0 records in [2025-09-24 01:32:46.417] 512+0 records out [2025-09-24 01:32:46.449] Waiting data available... [2025-09-24 01:32:46.465] Starting syslogd/klogd: done [2025-09-24 01:32:46.481] DML Start [2025-09-24 01:32:46.640] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:32:46.880] DML res1: 0 [2025-09-24 01:32:47.304] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:32:47.304] Read Success [2025-09-24 01:32:47.304] Verifying certificate... [2025-09-24 01:32:47.559] Verified OK [2025-09-24 01:32:47.576] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:32:49.278] Verified OK [2025-09-24 01:32:49.278] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:32:49.893] Verified OK [2025-09-24 01:32:49.893] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:32:52.483] fs.protected_hardlinks = 1 [2025-09-24 01:32:52.499] fs.protected_symlinks = 1 [2025-09-24 01:32:52.499] kernel.modules_disabled = 1 [2025-09-24 01:32:52.691] [2025-09-24 01:32:52.691] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:32:53.983] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:33:01.830] SBL1:1210.0.1.0 [2025-09-24 01:33:01.878] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:33:03.445] SBL2:1210.0.1.0 [2025-09-24 01:33:03.476] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:33:03.589] j-A [2025-09-24 01:33:10.943] The R5 Autosar Classic is running [2025-09-24 01:33:10.943] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:33:10.964] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:33:11.571] INIT: version 2.96 booting [2025-09-24 01:33:11.684] INIT: Entering runlevel: 5 [2025-09-24 01:33:11.843] mtd24 attached [2025-09-24 01:33:11.843] mtd28 attached [2025-09-24 01:33:11.859] mtd32 attached [2025-09-24 01:33:11.907] ubi0:textures is mounted. [2025-09-24 01:33:11.907] RTNETLINK answers: File exists [2025-09-24 01:33:11.953] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:33:11.953] ubi1:animations is mounted. [2025-09-24 01:33:11.953] ubi2:dml_code is mounted. [2025-09-24 01:33:11.953] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:33:11.953] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:33:11.953] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:33:11.953] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:33:11.953] data.LB_FadeInType0=100 [2025-09-24 01:33:11.953] data.CHLH_FadeInType0=0 [2025-09-24 01:33:11.974] data.WU_FadeInDelay=0 [2025-09-24 01:33:11.974] max_time_out=0 [2025-09-24 01:33:11.974] No splash screen [2025-09-24 01:33:11.974] stop dss Done [2025-09-24 01:33:12.046] /dev/mem opened. [2025-09-24 01:33:12.046] Memory mapped at address 0xffff928f3000. [2025-09-24 01:33:12.046] Read at address 0x00600018 (0xffff928f3018): 0x00000000 [2025-09-24 01:33:12.046] Write at address 0x00600018 (0xffff928f3018): 0x00400040, readback 0x00400040 [2025-09-24 01:33:12.062] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:33:12.078] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:33:12.222] Loaded PowerVR consumer services. [2025-09-24 01:33:12.270] 512+0 records in [2025-09-24 01:33:12.270] 512+0 records out [2025-09-24 01:33:12.286] Waiting data available... [2025-09-24 01:33:12.318] Starting syslogd/klogd: done [2025-09-24 01:33:12.334] DML Start [2025-09-24 01:33:12.494] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:33:12.718] DML res1: 0 [2025-09-24 01:33:13.191] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:33:13.191] Read Success [2025-09-24 01:33:13.191] Verifying certificate... [2025-09-24 01:33:13.447] Verified OK [2025-09-24 01:33:13.463] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:33:15.140] Verified OK [2025-09-24 01:33:15.140] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:33:15.754] Verified OK [2025-09-24 01:33:15.754] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:33:18.281] fs.protected_hardlinks = 1 [2025-09-24 01:33:18.281] fs.protected_symlinks = 1 [2025-09-24 01:33:18.297] kernel.modules_disabled = 1 [2025-09-24 01:33:18.489] [2025-09-24 01:33:18.489] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:33:19.815] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:33:27.653] SBL1:1210.0.1.0 [2025-09-24 01:33:27.701] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:33:29.268] SBL2:1210.0.1.0 [2025-09-24 01:33:29.316] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 01:33:29.412] j-A [2025-09-24 01:33:36.767] The R5 Autosar Classic is running [2025-09-24 01:33:36.790] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:33:36.790] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:33:37.397] INIT: version 2.96 booting [2025-09-24 01:33:37.509] INIT: Entering runlevel: 5 [2025-09-24 01:33:37.652] mtd28 attached [2025-09-24 01:33:37.668] mtd32 attached [2025-09-24 01:33:37.685] mtd24 attached [2025-09-24 01:33:37.771] RTNETLINK answers: File exists [2025-09-24 01:33:37.771] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:33:37.771] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:33:37.771] ubi0:animations is mounted. [2025-09-24 01:33:37.771] ubi1:dml_code is mounted. [2025-09-24 01:33:37.771] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:33:37.771] ubi2:textures is mounted. [2025-09-24 01:33:37.771] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:33:37.771] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:33:37.797] data.LB_FadeInType0=100 [2025-09-24 01:33:37.797] data.CHLH_FadeInType0=0 [2025-09-24 01:33:37.797] data.WU_FadeInDelay=0 [2025-09-24 01:33:37.797] max_time_out=0 [2025-09-24 01:33:37.797] No splash screen [2025-09-24 01:33:37.797] stop dss Done [2025-09-24 01:33:37.813] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:33:37.829] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:33:37.884] /dev/mem opened. [2025-09-24 01:33:37.884] Memory mapped at address 0xffff9df5e000. [2025-09-24 01:33:37.884] Read at address 0x00600018 (0xffff9df5e018): 0x00000000 [2025-09-24 01:33:37.884] Write at address 0x00600018 (0xffff9df5e018): 0x00400040, readback 0x00400040 [2025-09-24 01:33:38.012] Loaded PowerVR consumer services. [2025-09-24 01:33:38.108] 512+0 records in [2025-09-24 01:33:38.108] 512+0 records out [2025-09-24 01:33:38.108] Waiting data available... [2025-09-24 01:33:38.155] Starting syslogd/klogd: done [2025-09-24 01:33:38.171] DML Start [2025-09-24 01:33:38.347] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:33:38.587] DML res1: 0 [2025-09-24 01:33:39.072] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:33:39.072] Read Success [2025-09-24 01:33:39.072] Verifying certificate... [2025-09-24 01:33:39.328] Verified OK [2025-09-24 01:33:39.343] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:33:41.100] Verified OK [2025-09-24 01:33:41.100] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:33:41.753] Verified OK [2025-09-24 01:33:41.753] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:33:44.327] fs.protected_hardlinks = 1 [2025-09-24 01:33:44.327] fs.protected_symlinks = 1 [2025-09-24 01:33:44.343] kernel.modules_disabled = 1 [2025-09-24 01:33:44.520] [2025-09-24 01:33:44.520] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:33:45.691] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:33:53.486] SBL1:1210.0.1.0 [2025-09-24 01:33:53.517] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:33:55.101] SBL2:1210.0.1.0 [2025-09-24 01:33:55.133] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:33:55.244] j-A [2025-09-24 01:34:02.583] The R5 Autosar Classic is running [2025-09-24 01:34:02.608] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:34:02.608] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:34:03.216] INIT: version 2.96 booting [2025-09-24 01:34:03.328] INIT: Entering runlevel: 5 [2025-09-24 01:34:03.487] mtd28 attached [2025-09-24 01:34:03.487] mtd24 attached [2025-09-24 01:34:03.503] mtd32 attached [2025-09-24 01:34:03.520] ubi0:animations is mounted. [2025-09-24 01:34:03.552] RTNETLINK answers: File exists [2025-09-24 01:34:03.617] ubi2:dml_code is mounted. [2025-09-24 01:34:03.617] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:34:03.617] ubi1:textures is mounted. [2025-09-24 01:34:03.617] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:34:03.617] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:34:03.617] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:34:03.617] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:34:03.617] data.LB_FadeInType0=100 [2025-09-24 01:34:03.617] data.CHLH_FadeInType0=0 [2025-09-24 01:34:03.617] data.WU_FadeInDelay=0 [2025-09-24 01:34:03.617] max_time_out=0 [2025-09-24 01:34:03.617] No splash screen [2025-09-24 01:34:03.617] stop dss Done [2025-09-24 01:34:03.710] /dev/mem opened. [2025-09-24 01:34:03.710] Memory mapped at address 0xffff8fda1000. [2025-09-24 01:34:03.710] Read at address 0x00600018 (0xffff8fda1018): 0x00000000 [2025-09-24 01:34:03.710] Write at address 0x00600018 (0xffff8fda1018): 0x00400040, readback 0x00400040 [2025-09-24 01:34:03.710] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:34:03.710] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:34:03.871] Loaded PowerVR consumer services. [2025-09-24 01:34:03.902] 512+0 records in [2025-09-24 01:34:03.902] 512+0 records out [2025-09-24 01:34:03.934] Starting syslogd/klogd: Waiting data available... [2025-09-24 01:34:03.950] done [2025-09-24 01:34:03.966] DML Start [2025-09-24 01:34:04.158] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:34:04.382] DML res1: 0 [2025-09-24 01:34:04.782] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:34:04.803] Read Success [2025-09-24 01:34:04.803] Verifying certificate... [2025-09-24 01:34:05.026] Verified OK [2025-09-24 01:34:05.026] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:34:06.535] Verified OK [2025-09-24 01:34:06.535] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:34:07.062] Verified OK [2025-09-24 01:34:07.062] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:34:10.020] fs.protected_hardlinks = 1 [2025-09-24 01:34:10.020] fs.protected_symlinks = 1 [2025-09-24 01:34:10.036] kernel.modules_disabled = 1 [2025-09-24 01:34:10.243] [2025-09-24 01:34:10.243] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:34:11.497] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:34:19.312] SBL1:1210.0.1.0 [2025-09-24 01:34:19.360] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:34:20.927] SBL2:1210.0.1.0 [2025-09-24 01:34:20.975] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:34:21.071] j-A [2025-09-24 01:34:28.427] The R5 Autosar Classic is running [2025-09-24 01:34:28.427] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:34:28.448] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:34:29.055] INIT: version 2.96 booting [2025-09-24 01:34:29.167] INIT: Entering runlevel: 5 [2025-09-24 01:34:29.327] mtd32 attached [2025-09-24 01:34:29.343] mtd28 attached [2025-09-24 01:34:29.343] mtd24 attached [2025-09-24 01:34:29.390] ubi0:dml_code is mounted. [2025-09-24 01:34:29.391] RTNETLINK answers: File exists [2025-09-24 01:34:29.465] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:34:29.465] ubi2:textures is mounted. [2025-09-24 01:34:29.465] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:34:29.465] ubi1:animations is mounted. [2025-09-24 01:34:29.465] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:34:29.465] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:34:29.465] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:34:29.465] data.LB_FadeInType0=100 [2025-09-24 01:34:29.465] data.CHLH_FadeInType0=0 [2025-09-24 01:34:29.465] data.WU_FadeInDelay=0 [2025-09-24 01:34:29.465] max_time_out=0 [2025-09-24 01:34:29.465] No splash screen [2025-09-24 01:34:29.465] stop dss Done [2025-09-24 01:34:29.513] /dev/mem opened. [2025-09-24 01:34:29.513] Memory mapped at address 0xffffaa3ed000. [2025-09-24 01:34:29.545] Read at address 0x00600018 (0xffffaa3ed018): 0x00000000 [2025-09-24 01:34:29.545] Write at address 0x00600018 (0xffffaa3ed018): 0x00400040, readback 0x00400040 [2025-09-24 01:34:29.545] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:34:29.545] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:34:29.721] Loaded PowerVR consumer services. [2025-09-24 01:34:29.753] 512+0 records in [2025-09-24 01:34:29.753] 512+0 records out [2025-09-24 01:34:29.801] Waiting data available... [2025-09-24 01:34:29.801] Starting syslogd/klogd: done [2025-09-24 01:34:29.833] DML Start [2025-09-24 01:34:29.993] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:34:30.217] DML res1: 0 [2025-09-24 01:34:30.680] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:34:30.696] Read Success [2025-09-24 01:34:30.696] Verifying certificate... [2025-09-24 01:34:30.920] Verified OK [2025-09-24 01:34:30.936] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:34:32.594] Verified OK [2025-09-24 01:34:32.594] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:34:33.233] Verified OK [2025-09-24 01:34:33.249] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:34:35.886] fs.protected_hardlinks = 1 [2025-09-24 01:34:35.903] fs.protected_symlinks = 1 [2025-09-24 01:34:35.903] kernel.modules_disabled = 1 [2025-09-24 01:34:36.111] [2025-09-24 01:34:36.111] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:34:37.305] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:34:45.136] SBL1:1210.0.1.0 [2025-09-24 01:34:45.168] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:34:46.752] SBL2:1210.0.1.0 [2025-09-24 01:34:46.784] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:34:46.895] j-A [2025-09-24 01:34:54.267] The R5 Autosar Classic is running [2025-09-24 01:34:54.267] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:34:54.267] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:34:54.874] INIT: version 2.96 booting [2025-09-24 01:34:54.987] INIT: Entering runlevel: 5 [2025-09-24 01:34:55.131] mtd24 attached [2025-09-24 01:34:55.147] mtd28 attached [2025-09-24 01:34:55.163] mtd32 attached [2025-09-24 01:34:55.211] RTNETLINK answers: File exists [2025-09-24 01:34:55.273] ubi1:animations is mounted. [2025-09-24 01:34:55.273] ubi2:dml_code is mounted. [2025-09-24 01:34:55.273] ubi0:textures is mounted. [2025-09-24 01:34:55.273] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:34:55.273] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:34:55.273] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:34:55.273] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:34:55.273] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:34:55.273] data.LB_FadeInType0=100 [2025-09-24 01:34:55.273] data.CHLH_FadeInType0=0 [2025-09-24 01:34:55.273] data.WU_FadeInDelay=0 [2025-09-24 01:34:55.273] max_time_out=0 [2025-09-24 01:34:55.273] No splash screen [2025-09-24 01:34:55.273] stop dss Done [2025-09-24 01:34:55.363] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:34:55.363] /dev/mem opened. [2025-09-24 01:34:55.363] Memory mapped at address 0xffff8cd15000. [2025-09-24 01:34:55.363] Read at address 0x00600018 (0xffff8cd15018): 0x00000000 [2025-09-24 01:34:55.363] Write at address 0x00600018 (0xffff8cd15018): 0x00400040, readback 0x00400040 [2025-09-24 01:34:55.363] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:34:55.491] Loaded PowerVR consumer services. [2025-09-24 01:34:55.588] 512+0 records in [2025-09-24 01:34:55.588] 512+0 records out [2025-09-24 01:34:55.604] Waiting data available... [2025-09-24 01:34:55.619] Starting syslogd/klogd: done [2025-09-24 01:34:55.635] DML Start [2025-09-24 01:34:55.779] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:34:55.987] DML res1: 0 [2025-09-24 01:34:56.546] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:34:56.568] Read Success [2025-09-24 01:34:56.568] Verifying certificate... [2025-09-24 01:34:56.808] Verified OK [2025-09-24 01:34:56.808] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:34:58.428] Verified OK [2025-09-24 01:34:58.428] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:34:59.052] Verified OK [2025-09-24 01:34:59.052] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:35:01.705] fs.protected_hardlinks = 1 [2025-09-24 01:35:01.705] fs.protected_symlinks = 1 [2025-09-24 01:35:01.721] kernel.modules_disabled = 1 [2025-09-24 01:35:01.913] [2025-09-24 01:35:01.913] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:35:03.127] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:35:10.944] SBL1:1210.0.1.0 [2025-09-24 01:35:10.992] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:35:12.560] SBL2:1210.0.1.0 [2025-09-24 01:35:12.591] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:35:12.703] j-A [2025-09-24 01:35:20.077] The R5 Autosar Classic is running [2025-09-24 01:35:20.077] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:35:20.077] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:35:20.684] INIT: version 2.96 booting [2025-09-24 01:35:20.797] INIT: Entering runlevel: 5 [2025-09-24 01:35:20.956] mtd28 attached [2025-09-24 01:35:20.973] mtd32 attached [2025-09-24 01:35:20.973] mtd24 attached [2025-09-24 01:35:21.005] ubi0:animations is mounted. [2025-09-24 01:35:21.021] RTNETLINK answers: File exists [2025-09-24 01:35:21.082] ubi2:textures is mounted. [2025-09-24 01:35:21.082] ubi1:dml_code is mounted. [2025-09-24 01:35:21.082] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:35:21.082] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:35:21.082] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:35:21.082] data.LB_FadeInType0=100 [2025-09-24 01:35:21.082] data.CHLH_FadeInType0=0 [2025-09-24 01:35:21.082] data.WU_FadeInDelay=0 [2025-09-24 01:35:21.082] max_time_out=0 [2025-09-24 01:35:21.082] No splash screen [2025-09-24 01:35:21.082] stop dss Done [2025-09-24 01:35:21.082] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:35:21.082] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:35:21.154] /dev/mem opened. [2025-09-24 01:35:21.154] Memory mapped at address 0xffff9a052000. [2025-09-24 01:35:21.154] Read at address 0x00600018 (0xffff9a052018): 0x00000000 [2025-09-24 01:35:21.154] Write at address 0x00600018 (0xffff9a052018): 0x00400040, readback 0x00400040 [2025-09-24 01:35:21.170] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:35:21.186] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:35:21.346] Loaded PowerVR consumer services. [2025-09-24 01:35:21.378] 512+0 records in [2025-09-24 01:35:21.378] 512+0 records out [2025-09-24 01:35:21.394] Waiting data available... [2025-09-24 01:35:21.426] Starting syslogd/klogd: done [2025-09-24 01:35:21.442] DML Start [2025-09-24 01:35:21.634] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:35:21.842] DML res1: 0 [2025-09-24 01:35:22.318] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:35:22.318] Read Success [2025-09-24 01:35:22.318] Verifying certificate... [2025-09-24 01:35:22.589] Verified OK [2025-09-24 01:35:22.589] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:35:24.403] Verified OK [2025-09-24 01:35:24.403] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:35:24.942] Verified OK [2025-09-24 01:35:24.942] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:35:27.389] fs.protected_hardlinks = 1 [2025-09-24 01:35:27.389] fs.protected_symlinks = 1 [2025-09-24 01:35:27.405] kernel.modules_disabled = 1 [2025-09-24 01:35:27.596] [2025-09-24 01:35:27.596] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:35:28.935] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:35:36.788] SBL1:1210.0.1.0 [2025-09-24 01:35:36.820] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:35:38.403] SBL2:1210.0.1.0 [2025-09-24 01:35:38.436] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:35:38.547] j-A [2025-09-24 01:35:45.888] The R5 Autosar Classic is running [2025-09-24 01:35:45.911] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:35:45.911] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:35:46.520] INIT: version 2.96 booting [2025-09-24 01:35:46.632] INIT: Entering runlevel: 5 [2025-09-24 01:35:46.775] mtd28 attached [2025-09-24 01:35:46.791] mtd32 attached [2025-09-24 01:35:46.808] mtd24 attached [2025-09-24 01:35:46.824] ubi0:animations is mounted. [2025-09-24 01:35:46.855] RTNETLINK answers: File exists [2025-09-24 01:35:46.855] ubi1:dml_code is mounted. [2025-09-24 01:35:46.908] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:35:46.908] ubi2:textures is mounted. [2025-09-24 01:35:46.908] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:35:46.908] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:35:46.908] data.LB_FadeInType0=100 [2025-09-24 01:35:46.908] data.CHLH_FadeInType0=0 [2025-09-24 01:35:46.908] data.WU_FadeInDelay=0 [2025-09-24 01:35:46.908] max_time_out=0 [2025-09-24 01:35:46.908] No splash screen [2025-09-24 01:35:46.908] stop dss Done [2025-09-24 01:35:46.908] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:35:46.908] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:35:46.940] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:35:46.940] /dev/mem opened. [2025-09-24 01:35:46.972] Memory mapped at address 0xffff8934b000. [2025-09-24 01:35:46.972] Read at address 0x00600018 (0xffff8934b018): 0x00000000 [2025-09-24 01:35:46.972] Write at address 0x00600018 (0xffff8934b018): 0x00400040, readback 0x00400040 [2025-09-24 01:35:46.972] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:35:47.164] Loaded PowerVR consumer services. [2025-09-24 01:35:47.224] Waiting data available... [2025-09-24 01:35:47.224] 512+0 records in [2025-09-24 01:35:47.224] 512+0 records out [2025-09-24 01:35:47.256] Starting syslogd/klogd: done [2025-09-24 01:35:47.272] DML Start [2025-09-24 01:35:47.448] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:35:47.672] DML res1: 0 [2025-09-24 01:35:48.072] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:35:48.093] Read Success [2025-09-24 01:35:48.093] Verifying certificate... [2025-09-24 01:35:48.364] Verified OK [2025-09-24 01:35:48.380] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:35:50.076] Verified OK [2025-09-24 01:35:50.076] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:35:50.667] Verified OK [2025-09-24 01:35:50.683] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:35:53.338] fs.protected_hardlinks = 1 [2025-09-24 01:35:53.369] fs.protected_symlinks = 1 [2025-09-24 01:35:53.369] kernel.modules_disabled = 1 [2025-09-24 01:35:53.561] [2025-09-24 01:35:53.561] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:35:54.800] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:36:02.596] SBL1:1210.0.1.0 [2025-09-24 01:36:02.628] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:36:04.211] SBL2:1210.0.1.0 [2025-09-24 01:36:04.243] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:36:04.354] j-A [2025-09-24 01:36:11.726] The R5 Autosar Classic is running [2025-09-24 01:36:11.726] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:36:11.726] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:36:12.333] INIT: version 2.96 booting [2025-09-24 01:36:12.445] INIT: Entering runlevel: 5 [2025-09-24 01:36:12.604] mtd28 attached [2025-09-24 01:36:12.604] mtd32 attached [2025-09-24 01:36:12.620] mtd24 attached [2025-09-24 01:36:12.652] ubi0:animations is mounted. [2025-09-24 01:36:12.668] ubi1:dml_code is mounted. [2025-09-24 01:36:12.717] ubi2:textures is mounted. [2025-09-24 01:36:12.717] RTNETLINK answers: File exists [2025-09-24 01:36:12.717] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:36:12.717] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:36:12.717] data.LB_FadeInType0=100 [2025-09-24 01:36:12.717] data.CHLH_FadeInType0=0 [2025-09-24 01:36:12.717] data.WU_FadeInDelay=0 [2025-09-24 01:36:12.717] max_time_out=0 [2025-09-24 01:36:12.717] No splash screen [2025-09-24 01:36:12.717] stop dss Done [2025-09-24 01:36:12.717] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:36:12.733] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:36:12.733] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:36:12.789] /dev/mem opened. [2025-09-24 01:36:12.789] Memory mapped at address 0xffffa549f000. [2025-09-24 01:36:12.789] Read at address 0x00600018 (0xffffa549f018): 0x00000000 [2025-09-24 01:36:12.789] Write at address 0x00600018 (0xffffa549f018): 0x00400040, readback 0x00400040 [2025-09-24 01:36:12.837] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:36:12.853] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:36:12.996] Loaded PowerVR consumer services. [2025-09-24 01:36:13.051] Waiting data available... [2025-09-24 01:36:13.051] 512+0 records in [2025-09-24 01:36:13.051] 512+0 records out [2025-09-24 01:36:13.083] Starting syslogd/klogd: done [2025-09-24 01:36:13.099] DML Start [2025-09-24 01:36:13.291] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:36:13.514] DML res1: 0 [2025-09-24 01:36:13.882] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:36:13.898] Read Success [2025-09-24 01:36:13.898] Verifying certificate... [2025-09-24 01:36:14.122] Verified OK [2025-09-24 01:36:14.138] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:36:15.758] Verified OK [2025-09-24 01:36:15.758] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:36:16.411] Verified OK [2025-09-24 01:36:16.411] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:36:19.034] fs.protected_hardlinks = 1 [2025-09-24 01:36:19.049] fs.protected_symlinks = 1 [2025-09-24 01:36:19.049] kernel.modules_disabled = 1 [2025-09-24 01:36:19.226] [2025-09-24 01:36:19.241] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:36:20.606] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:36:28.408] SBL1:1210.0.1.0 [2025-09-24 01:36:28.456] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:36:30.023] SBL2:1210.0.1.0 [2025-09-24 01:36:30.055] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:36:30.167] j-A [2025-09-24 01:36:37.541] The R5 Autosar Classic is running [2025-09-24 01:36:37.541] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:36:37.541] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:36:38.149] INIT: version 2.96 booting [2025-09-24 01:36:38.261] INIT: Entering runlevel: 5 [2025-09-24 01:36:38.404] mtd24 attached [2025-09-24 01:36:38.437] mtd32 attached [2025-09-24 01:36:38.437] mtd28 attached [2025-09-24 01:36:38.469] ubi0:textures is mounted. [2025-09-24 01:36:38.485] RTNETLINK answers: File exists [2025-09-24 01:36:38.548] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:36:38.548] ubi1:dml_code is mounted. [2025-09-24 01:36:38.548] ubi2:animations is mounted. [2025-09-24 01:36:38.548] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:36:38.548] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:36:38.548] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:36:38.548] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:36:38.548] data.LB_FadeInType0=100 [2025-09-24 01:36:38.548] data.CHLH_FadeInType0=0 [2025-09-24 01:36:38.548] data.WU_FadeInDelay=0 [2025-09-24 01:36:38.548] max_time_out=0 [2025-09-24 01:36:38.548] No splash screen [2025-09-24 01:36:38.548] stop dss Done [2025-09-24 01:36:38.613] /dev/mem opened. [2025-09-24 01:36:38.613] Memory mapped at address 0xffff80095000. [2025-09-24 01:36:38.613] Read at address 0x00600018 (0xffff80095018): 0x00000000 [2025-09-24 01:36:38.613] Write at address 0x00600018 (0xffff80095018): 0x00400040, readback 0x00400040 [2025-09-24 01:36:38.629] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:36:38.629] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:36:38.821] Loaded PowerVR consumer services. [2025-09-24 01:36:38.853] 512+0 records in [2025-09-24 01:36:38.853] 512+0 records out [2025-09-24 01:36:38.901] Waiting data available... [2025-09-24 01:36:38.901] Starting syslogd/klogd: done [2025-09-24 01:36:38.917] DML Start [2025-09-24 01:36:39.109] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:36:39.348] DML res1: 0 [2025-09-24 01:36:39.795] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:36:39.795] Read Success [2025-09-24 01:36:39.795] Verifying certificate... [2025-09-24 01:36:40.083] Verified OK [2025-09-24 01:36:40.099] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:36:41.769] Verified OK [2025-09-24 01:36:41.769] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:36:42.425] Verified OK [2025-09-24 01:36:42.425] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:36:44.999] fs.protected_hardlinks = 1 [2025-09-24 01:36:45.015] fs.protected_symlinks = 1 [2025-09-24 01:36:45.015] kernel.modules_disabled = 1 [2025-09-24 01:36:45.207] [2025-09-24 01:36:45.207] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:36:46.451] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:36:54.228] SBL1:1210.0.1.0 [2025-09-24 01:36:54.276] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:36:55.843] SBL2:1210.0.1.0 [2025-09-24 01:36:55.874] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:36:55.986] j-A [2025-09-24 01:37:03.341] The R5 Autosar Classic is running [2025-09-24 01:37:03.341] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:37:03.362] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:37:03.969] INIT: version 2.96 booting [2025-09-24 01:37:04.081] INIT: Entering runlevel: 5 [2025-09-24 01:37:04.241] mtd24 attached [2025-09-24 01:37:04.257] mtd32 attached [2025-09-24 01:37:04.257] mtd28 attached [2025-09-24 01:37:04.273] ubi0:textures is mounted. [2025-09-24 01:37:04.305] ubi1:dml_code is mounted. [2025-09-24 01:37:04.305] RTNETLINK answers: File exists [2025-09-24 01:37:04.363] ubi2:animations is mounted. [2025-09-24 01:37:04.363] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:37:04.363] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:37:04.363] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:37:04.363] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:37:04.363] data.LB_FadeInType0=100 [2025-09-24 01:37:04.363] data.CHLH_FadeInType0=0 [2025-09-24 01:37:04.363] data.WU_FadeInDelay=0 [2025-09-24 01:37:04.363] max_time_out=0 [2025-09-24 01:37:04.363] No splash screen [2025-09-24 01:37:04.363] stop dss Done [2025-09-24 01:37:04.363] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:37:04.433] /dev/mem opened. [2025-09-24 01:37:04.433] Memory mapped at address 0xffffa2a59000. [2025-09-24 01:37:04.433] Read at address 0x00600018 (0xffffa2a59018): 0x00000000 [2025-09-24 01:37:04.433] Write at address 0x00600018 (0xffffa2a59018): 0x00400040, readback 0x00400040 [2025-09-24 01:37:04.449] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:37:04.465] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:37:04.641] Loaded PowerVR consumer services. [2025-09-24 01:37:04.682] Waiting data available... [2025-09-24 01:37:04.682] 512+0 records in [2025-09-24 01:37:04.682] 512+0 records out [2025-09-24 01:37:04.713] Starting syslogd/klogd: done [2025-09-24 01:37:04.729] DML Start [2025-09-24 01:37:04.922] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:37:05.162] DML res1: 0 [2025-09-24 01:37:05.590] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:37:05.590] Read Success [2025-09-24 01:37:05.590] Verifying certificate... [2025-09-24 01:37:05.830] Verified OK [2025-09-24 01:37:05.846] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:37:07.516] Verified OK [2025-09-24 01:37:07.516] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:37:08.149] Verified OK [2025-09-24 01:37:08.149] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:37:10.757] fs.protected_hardlinks = 1 [2025-09-24 01:37:10.772] fs.protected_symlinks = 1 [2025-09-24 01:37:10.788] kernel.modules_disabled = 1 [2025-09-24 01:37:10.980] [2025-09-24 01:37:10.980] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:37:12.256] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:37:20.065] SBL1:1210.0.1.0 [2025-09-24 01:37:20.097] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:37:21.679] SBL2:1210.0.1.0 [2025-09-24 01:37:21.711] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 01:37:21.824] j-A [2025-09-24 01:37:29.162] The R5 Autosar Classic is running [2025-09-24 01:37:29.187] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:37:29.187] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:37:29.795] INIT: version 2.96 booting [2025-09-24 01:37:29.906] INIT: Entering runlevel: 5 [2025-09-24 01:37:30.066] mtd32 attached [2025-09-24 01:37:30.082] mtd28 attached [2025-09-24 01:37:30.082] mtd24 attached [2025-09-24 01:37:30.130] RTNETLINK answers: File exists [2025-09-24 01:37:30.130] ubi0:dml_code is mounted. [2025-09-24 01:37:30.146] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:37:30.146] ubi2:textures is mounted. [2025-09-24 01:37:30.194] ubi1:animations is mounted. [2025-09-24 01:37:30.194] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:37:30.194] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:37:30.194] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:37:30.194] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:37:30.194] data.LB_FadeInType0=100 [2025-09-24 01:37:30.194] data.CHLH_FadeInType0=0 [2025-09-24 01:37:30.194] data.WU_FadeInDelay=0 [2025-09-24 01:37:30.194] max_time_out=0 [2025-09-24 01:37:30.194] No splash screen [2025-09-24 01:37:30.194] stop dss Done [2025-09-24 01:37:30.239] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:37:30.239] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:37:30.274] /dev/mem opened. [2025-09-24 01:37:30.274] Memory mapped at address 0xffffae6d9000. [2025-09-24 01:37:30.274] Read at address 0x00600018 (0xffffae6d9018): 0x00000000 [2025-09-24 01:37:30.274] Write at address 0x00600018 (0xffffae6d9018): 0x00400040, readback 0x00400040 [2025-09-24 01:37:30.338] Loaded PowerVR consumer services. [2025-09-24 01:37:30.509] Waiting data available... [2025-09-24 01:37:30.509] 512+0 records in [2025-09-24 01:37:30.509] 512+0 records out [2025-09-24 01:37:30.541] Starting syslogd/klogd: done [2025-09-24 01:37:30.557] DML Start [2025-09-24 01:37:30.701] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:37:30.909] DML res1: 0 [2025-09-24 01:37:31.416] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:37:31.416] Read Success [2025-09-24 01:37:31.416] Verifying certificate... [2025-09-24 01:37:31.687] Verified OK [2025-09-24 01:37:31.703] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:37:33.318] Verified OK [2025-09-24 01:37:33.318] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:37:33.990] Verified OK [2025-09-24 01:37:33.990] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:37:36.725] fs.protected_hardlinks = 1 [2025-09-24 01:37:36.741] fs.protected_symlinks = 1 [2025-09-24 01:37:36.741] kernel.modules_disabled = 1 [2025-09-24 01:37:36.949] [2025-09-24 01:37:36.949] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:37:38.092] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:37:45.888] SBL1:1210.0.1.0 [2025-09-24 01:37:45.936] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:37:47.503] SBL2:1210.0.1.0 [2025-09-24 01:37:47.534] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:37:47.647] j-A [2025-09-24 01:37:55.021] The R5 Autosar Classic is running [2025-09-24 01:37:55.021] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:37:55.021] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:37:55.629] INIT: version 2.96 booting [2025-09-24 01:37:55.741] INIT: Entering runlevel: 5 [2025-09-24 01:37:55.884] mtd24 attached [2025-09-24 01:37:55.900] mtd28 attached [2025-09-24 01:37:55.916] mtd32 attached [2025-09-24 01:37:55.948] ubi0:textures is mounted. [2025-09-24 01:37:55.964] RTNETLINK answers: File exists [2025-09-24 01:37:56.023] ubi2:dml_code is mounted. [2025-09-24 01:37:56.023] ubi1:animations is mounted. [2025-09-24 01:37:56.023] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:37:56.023] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:37:56.023] data.LB_FadeInType0=100 [2025-09-24 01:37:56.023] data.CHLH_FadeInType0=0 [2025-09-24 01:37:56.023] data.WU_FadeInDelay=0 [2025-09-24 01:37:56.023] max_time_out=0 [2025-09-24 01:37:56.023] No splash screen [2025-09-24 01:37:56.023] stop dss Done [2025-09-24 01:37:56.023] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:37:56.023] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:37:56.023] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:37:56.055] /dev/mem opened. [2025-09-24 01:37:56.055] Memory mapped at address 0xffffade13000. [2025-09-24 01:37:56.081] Read at address 0x00600018 (0xffffade13018): 0x00000000 [2025-09-24 01:37:56.081] Write at address 0x00600018 (0xffffade13018): 0x00400040, readback 0x00400040 [2025-09-24 01:37:56.096] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:37:56.112] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:37:56.208] Loaded PowerVR consumer services. [2025-09-24 01:37:56.320] Waiting data available... [2025-09-24 01:37:56.336] 512+0 records in [2025-09-24 01:37:56.336] 512+0 records out [2025-09-24 01:37:56.352] Starting syslogd/klogd: done [2025-09-24 01:37:56.384] DML Start [2025-09-24 01:37:56.560] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:37:56.783] DML res1: 0 [2025-09-24 01:37:57.232] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:37:57.253] Read Success [2025-09-24 01:37:57.253] Verifying certificate... [2025-09-24 01:37:57.493] Verified OK [2025-09-24 01:37:57.509] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:37:59.138] Verified OK [2025-09-24 01:37:59.138] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:37:59.784] Verified OK [2025-09-24 01:37:59.784] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:38:02.487] fs.protected_hardlinks = 1 [2025-09-24 01:38:02.502] fs.protected_symlinks = 1 [2025-09-24 01:38:02.502] kernel.modules_disabled = 1 [2025-09-24 01:38:02.694] [2025-09-24 01:38:02.694] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:38:03.909] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:38:11.718] SBL1:1210.0.1.0 [2025-09-24 01:38:11.766] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:38:13.332] SBL2:1210.0.1.0 [2025-09-24 01:38:13.364] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:38:13.477] j-A [2025-09-24 01:38:20.851] The R5 Autosar Classic is running [2025-09-24 01:38:20.851] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:38:20.851] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:38:21.459] INIT: version 2.96 booting [2025-09-24 01:38:21.571] INIT: Entering runlevel: 5 [2025-09-24 01:38:21.714] mtd24 attached [2025-09-24 01:38:21.730] mtd28 attached [2025-09-24 01:38:21.746] mtd32 attached [2025-09-24 01:38:21.799] ubi1:animations is mounted. [2025-09-24 01:38:21.799] ubi0:textures is mounted. [2025-09-24 01:38:21.799] RTNETLINK answers: File exists [2025-09-24 01:38:21.799] ubi2:dml_code is mounted. [2025-09-24 01:38:21.799] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:38:21.852] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:38:21.852] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:38:21.852] data.LB_FadeInType0=100 [2025-09-24 01:38:21.852] data.CHLH_FadeInType0=0 [2025-09-24 01:38:21.852] data.WU_FadeInDelay=0 [2025-09-24 01:38:21.852] max_time_out=0 [2025-09-24 01:38:21.852] No splash screen [2025-09-24 01:38:21.852] stop dss Done [2025-09-24 01:38:21.852] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:38:21.852] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:38:21.884] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:38:21.920] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:38:21.920] /dev/mem opened. [2025-09-24 01:38:21.920] Memory mapped at address 0xffff9e871000. [2025-09-24 01:38:21.920] Read at address 0x00600018 (0xffff9e871018): 0x00000000 [2025-09-24 01:38:21.920] Write at address 0x00600018 (0xffff9e871018): 0x00400040, readback 0x00400040 [2025-09-24 01:38:22.031] Loaded PowerVR consumer services. [2025-09-24 01:38:22.143] 512+0 records in [2025-09-24 01:38:22.143] 512+0 records out [2025-09-24 01:38:22.160] Waiting data available... [2025-09-24 01:38:22.175] Starting syslogd/klogd: done [2025-09-24 01:38:22.191] DML Start [2025-09-24 01:38:22.399] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:38:22.639] DML res1: 0 [2025-09-24 01:38:23.016] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:38:23.016] Read Success [2025-09-24 01:38:23.016] Verifying certificate... [2025-09-24 01:38:23.240] Verified OK [2025-09-24 01:38:23.256] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:38:25.005] Verified OK [2025-09-24 01:38:25.005] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:38:25.595] Verified OK [2025-09-24 01:38:25.595] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:38:28.201] fs.protected_hardlinks = 1 [2025-09-24 01:38:28.201] fs.protected_symlinks = 1 [2025-09-24 01:38:28.217] kernel.modules_disabled = 1 [2025-09-24 01:38:28.408] [2025-09-24 01:38:28.408] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:38:29.716] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:38:37.549] SBL1:1210.0.1.0 [2025-09-24 01:38:37.581] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:38:39.164] SBL2:1210.0.1.0 [2025-09-24 01:38:39.196] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:38:39.293] j-A [2025-09-24 01:38:46.648] The R5 Autosar Classic is running [2025-09-24 01:38:46.672] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:38:46.672] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:38:47.280] INIT: version 2.96 booting [2025-09-24 01:38:47.391] INIT: Entering runlevel: 5 [2025-09-24 01:38:47.551] mtd28 attached [2025-09-24 01:38:47.567] mtd32 attached [2025-09-24 01:38:47.567] mtd24 attached [2025-09-24 01:38:47.599] ubi0:animations is mounted. [2025-09-24 01:38:47.655] RTNETLINK answers: File exists [2025-09-24 01:38:47.655] ubi1:dml_code is mounted. [2025-09-24 01:38:47.655] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:38:47.655] ubi2:textures is mounted. [2025-09-24 01:38:47.655] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:38:47.655] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:38:47.655] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:38:47.655] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:38:47.677] data.LB_FadeInType0=100 [2025-09-24 01:38:47.677] data.CHLH_FadeInType0=0 [2025-09-24 01:38:47.677] data.WU_FadeInDelay=0 [2025-09-24 01:38:47.677] max_time_out=0 [2025-09-24 01:38:47.677] No splash screen [2025-09-24 01:38:47.677] stop dss Done [2025-09-24 01:38:47.754] /dev/mem opened. [2025-09-24 01:38:47.754] Memory mapped at address 0xffff9ccab000. [2025-09-24 01:38:47.754] Read at address 0x00600018 (0xffff9ccab018): 0x00000000 [2025-09-24 01:38:47.754] Write at address 0x00600018 (0xffff9ccab018): 0x00400040, readback 0x00400040 [2025-09-24 01:38:47.754] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:38:47.754] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:38:47.946] Loaded PowerVR consumer services. [2025-09-24 01:38:47.994] 512+0 records in [2025-09-24 01:38:47.994] 512+0 records out [2025-09-24 01:38:48.026] Waiting data available... [2025-09-24 01:38:48.042] Starting syslogd/klogd: done [2025-09-24 01:38:48.058] DML Start [2025-09-24 01:38:48.265] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:38:48.505] DML res1: 0 [2025-09-24 01:38:48.903] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:38:48.903] Read Success [2025-09-24 01:38:48.903] Verifying certificate... [2025-09-24 01:38:49.158] Verified OK [2025-09-24 01:38:49.190] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:38:50.933] Verified OK [2025-09-24 01:38:50.933] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:38:51.551] Verified OK [2025-09-24 01:38:51.551] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:38:54.125] fs.protected_hardlinks = 1 [2025-09-24 01:38:54.125] fs.protected_symlinks = 1 [2025-09-24 01:38:54.141] kernel.modules_disabled = 1 [2025-09-24 01:38:54.333] [2025-09-24 01:38:54.333] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:38:55.561] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:39:03.394] SBL1:1210.0.1.0 [2025-09-24 01:39:03.426] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:39:05.008] SBL2:1210.0.1.0 [2025-09-24 01:39:05.040] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:39:05.152] j-A [2025-09-24 01:39:12.492] The R5 Autosar Classic is running [2025-09-24 01:39:12.517] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:39:12.517] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:39:13.125] INIT: version 2.96 booting [2025-09-24 01:39:13.236] INIT: Entering runlevel: 5 [2025-09-24 01:39:13.397] mtd32 attached [2025-09-24 01:39:13.413] mtd28 attached [2025-09-24 01:39:13.413] mtd24 attached [2025-09-24 01:39:13.460] RTNETLINK answers: File exists [2025-09-24 01:39:13.528] ubi0:dml_code is mounted. [2025-09-24 01:39:13.528] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:39:13.528] ubi1:animations is mounted. [2025-09-24 01:39:13.528] ubi2:textures is mounted. [2025-09-24 01:39:13.528] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:39:13.528] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:39:13.528] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:39:13.528] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:39:13.528] data.LB_FadeInType0=100 [2025-09-24 01:39:13.528] data.CHLH_FadeInType0=0 [2025-09-24 01:39:13.528] data.WU_FadeInDelay=0 [2025-09-24 01:39:13.528] max_time_out=0 [2025-09-24 01:39:13.528] No splash screen [2025-09-24 01:39:13.528] stop dss Done [2025-09-24 01:39:13.576] /dev/mem opened. [2025-09-24 01:39:13.613] Memory mapped at address 0xffff8a364000. [2025-09-24 01:39:13.613] Read at address 0x00600018 (0xffff8a364018): 0x00000000 [2025-09-24 01:39:13.613] Write at address 0x00600018 (0xffff8a364018): 0x00400040, readback 0x00400040 [2025-09-24 01:39:13.613] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:39:13.613] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:39:13.805] Loaded PowerVR consumer services. [2025-09-24 01:39:13.853] 512+0 records in [2025-09-24 01:39:13.853] 512+0 records out [2025-09-24 01:39:13.869] Waiting data available... [2025-09-24 01:39:13.901] Starting syslogd/klogd: done [2025-09-24 01:39:13.917] DML Start [2025-09-24 01:39:14.093] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:39:14.317] DML res1: 0 [2025-09-24 01:39:14.810] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:39:14.810] Read Success [2025-09-24 01:39:14.810] Verifying certificate... [2025-09-24 01:39:15.034] Verified OK [2025-09-24 01:39:15.050] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:39:16.721] Verified OK [2025-09-24 01:39:16.721] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:39:17.371] Verified OK [2025-09-24 01:39:17.371] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:39:20.073] fs.protected_hardlinks = 1 [2025-09-24 01:39:20.103] fs.protected_symlinks = 1 [2025-09-24 01:39:20.103] kernel.modules_disabled = 1 [2025-09-24 01:39:20.294] [2025-09-24 01:39:20.294] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:39:21.442] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:39:29.202] SBL1:1210.0.1.0 [2025-09-24 01:39:29.250] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:39:30.817] SBL2:1210.0.1.0 [2025-09-24 01:39:30.849] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:39:30.960] j-A [2025-09-24 01:39:38.333] The R5 Autosar Classic is running [2025-09-24 01:39:38.333] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:39:38.333] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:39:38.941] INIT: version 2.96 booting [2025-09-24 01:39:39.052] INIT: Entering runlevel: 5 [2025-09-24 01:39:39.197] mtd24 attached [2025-09-24 01:39:39.213] mtd32 attached [2025-09-24 01:39:39.229] mtd28 attached [2025-09-24 01:39:39.334] ubi0:textures is mounted. [2025-09-24 01:39:39.334] RTNETLINK answers: File exists [2025-09-24 01:39:39.334] ubi1:dml_code is mounted. [2025-09-24 01:39:39.334] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:39:39.334] ubi2:animations is mounted. [2025-09-24 01:39:39.334] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:39:39.334] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:39:39.334] data.LB_FadeInType0=100 [2025-09-24 01:39:39.334] data.CHLH_FadeInType0=0 [2025-09-24 01:39:39.334] data.WU_FadeInDelay=0 [2025-09-24 01:39:39.334] max_time_out=0 [2025-09-24 01:39:39.334] No splash screen [2025-09-24 01:39:39.334] stop dss Done [2025-09-24 01:39:39.334] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:39:39.334] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:39:39.405] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:39:39.405] /dev/mem opened. [2025-09-24 01:39:39.405] Memory mapped at address 0xffffbcbb5000. [2025-09-24 01:39:39.405] Read at address 0x00600018 (0xffffbcbb5018): 0x00000000 [2025-09-24 01:39:39.405] Write at address 0x00600018 (0xffffbcbb5018): 0x00400040, readback 0x00400040 [2025-09-24 01:39:39.405] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:39:39.597] Loaded PowerVR consumer services. [2025-09-24 01:39:39.659] Waiting data available... [2025-09-24 01:39:39.659] 512+0 records in [2025-09-24 01:39:39.659] 512+0 records out [2025-09-24 01:39:39.691] Starting syslogd/klogd: done [2025-09-24 01:39:39.707] DML Start [2025-09-24 01:39:39.867] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:39:40.091] DML res1: 0 [2025-09-24 01:39:40.581] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:39:40.581] Read Success [2025-09-24 01:39:40.581] Verifying certificate... [2025-09-24 01:39:40.805] Verified OK [2025-09-24 01:39:40.821] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:39:42.541] Verified OK [2025-09-24 01:39:42.541] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:39:43.127] Verified OK [2025-09-24 01:39:43.127] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:39:45.796] fs.protected_hardlinks = 1 [2025-09-24 01:39:45.812] fs.protected_symlinks = 1 [2025-09-24 01:39:45.812] kernel.modules_disabled = 1 [2025-09-24 01:39:46.004] [2025-09-24 01:39:46.004] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:39:47.226] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:39:55.028] SBL1:1210.0.1.0 [2025-09-24 01:39:55.060] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:39:56.644] SBL2:1210.0.1.0 [2025-09-24 01:39:56.675] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:39:56.787] j-A [2025-09-24 01:40:04.127] The R5 Autosar Classic is running [2025-09-24 01:40:04.152] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:40:04.152] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:40:04.761] INIT: version 2.96 booting [2025-09-24 01:40:04.872] INIT: Entering runlevel: 5 [2025-09-24 01:40:05.032] mtd28 attached [2025-09-24 01:40:05.032] mtd24 attached [2025-09-24 01:40:05.048] mtd32 attached [2025-09-24 01:40:05.080] ubi0:animations is mounted. [2025-09-24 01:40:05.096] RTNETLINK answers: File exists [2025-09-24 01:40:05.134] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:40:05.134] ubi1:textures is mounted. [2025-09-24 01:40:05.134] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:40:05.134] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:40:05.134] ubi2:dml_code is mounted. [2025-09-24 01:40:05.134] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:40:05.134] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:40:05.159] data.LB_FadeInType0=100 [2025-09-24 01:40:05.159] data.CHLH_FadeInType0=0 [2025-09-24 01:40:05.159] data.WU_FadeInDelay=0 [2025-09-24 01:40:05.159] max_time_out=0 [2025-09-24 01:40:05.159] No splash screen [2025-09-24 01:40:05.159] stop dss Done [2025-09-24 01:40:05.175] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:40:05.192] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:40:05.240] /dev/mem opened. [2025-09-24 01:40:05.240] Memory mapped at address 0xffffb8120000. [2025-09-24 01:40:05.240] Read at address 0x00600018 (0xffffb8120018): 0x00000000 [2025-09-24 01:40:05.240] Write at address 0x00600018 (0xffffb8120018): 0x00400040, readback 0x00400040 [2025-09-24 01:40:05.416] Loaded PowerVR consumer services. [2025-09-24 01:40:05.448] 512+0 records in [2025-09-24 01:40:05.448] 512+0 records out [2025-09-24 01:40:05.496] Starting syslogd/klogd: Waiting data available... [2025-09-24 01:40:05.512] done [2025-09-24 01:40:05.528] DML Start [2025-09-24 01:40:05.672] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:40:05.879] DML res1: 0 [2025-09-24 01:40:06.407] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:40:06.428] Read Success [2025-09-24 01:40:06.428] Verifying certificate... [2025-09-24 01:40:06.652] Verified OK [2025-09-24 01:40:06.668] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:40:08.443] Verified OK [2025-09-24 01:40:08.443] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:40:09.027] Verified OK [2025-09-24 01:40:09.027] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:40:11.506] fs.protected_hardlinks = 1 [2025-09-24 01:40:11.522] fs.protected_symlinks = 1 [2025-09-24 01:40:11.537] kernel.modules_disabled = 1 [2025-09-24 01:40:11.745] [2025-09-24 01:40:11.745] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:40:13.025] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:40:20.856] SBL1:1210.0.1.0 [2025-09-24 01:40:20.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:40:22.471] SBL2:1210.0.1.0 [2025-09-24 01:40:22.503] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 01:40:22.615] j-A [2025-09-24 01:40:29.955] The R5 Autosar Classic is running [2025-09-24 01:40:29.986] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:40:29.986] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:40:30.593] INIT: version 2.96 booting [2025-09-24 01:40:30.706] INIT: Entering runlevel: 5 [2025-09-24 01:40:30.850] mtd28 attached [2025-09-24 01:40:30.865] mtd32 attached [2025-09-24 01:40:30.881] mtd24 attached [2025-09-24 01:40:30.897] ubi0:animations is mounted. [2025-09-24 01:40:30.913] ubi1:dml_code is mounted. [2025-09-24 01:40:30.929] RTNETLINK answers: File exists [2025-09-24 01:40:30.987] ubi2:textures is mounted. [2025-09-24 01:40:30.987] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:40:30.987] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:40:30.987] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:40:30.987] data.LB_FadeInType0=100 [2025-09-24 01:40:30.987] data.CHLH_FadeInType0=0 [2025-09-24 01:40:30.987] data.WU_FadeInDelay=0 [2025-09-24 01:40:30.987] max_time_out=0 [2025-09-24 01:40:30.987] No splash screen [2025-09-24 01:40:30.987] stop dss Done [2025-09-24 01:40:30.987] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:40:30.987] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:40:31.066] /dev/mem opened. [2025-09-24 01:40:31.066] Memory mapped at address 0xffffa483a000. [2025-09-24 01:40:31.066] Read at address 0x00600018 (0xffffa483a018): 0x00000000 [2025-09-24 01:40:31.066] Write at address 0x00600018 (0xffffa483a018): 0x00400040, readback 0x00400040 [2025-09-24 01:40:31.066] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:40:31.066] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:40:31.274] Loaded PowerVR consumer services. [2025-09-24 01:40:31.306] 512+0 records in [2025-09-24 01:40:31.306] 512+0 records out [2025-09-24 01:40:31.338] Waiting data available... [2025-09-24 01:40:31.338] Starting syslogd/klogd: done [2025-09-24 01:40:31.370] DML Start [2025-09-24 01:40:31.546] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:40:31.770] DML res1: 0 [2025-09-24 01:40:32.218] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:40:32.234] Read Success [2025-09-24 01:40:32.234] Verifying certificate... [2025-09-24 01:40:32.490] Verified OK [2025-09-24 01:40:32.506] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:40:34.099] Verified OK [2025-09-24 01:40:34.099] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:40:34.703] Verified OK [2025-09-24 01:40:34.703] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:40:37.358] fs.protected_hardlinks = 1 [2025-09-24 01:40:37.374] fs.protected_symlinks = 1 [2025-09-24 01:40:37.374] kernel.modules_disabled = 1 [2025-09-24 01:40:37.566] [2025-09-24 01:40:37.566] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:40:38.860] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:40:46.684] SBL1:1210.0.1.0 [2025-09-24 01:40:46.733] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:40:48.300] SBL2:1210.0.1.0 [2025-09-24 01:40:48.332] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:40:48.444] j-A [2025-09-24 01:40:55.816] The R5 Autosar Classic is running [2025-09-24 01:40:55.816] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:40:55.816] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:40:56.424] INIT: version 2.96 booting [2025-09-24 01:40:56.535] INIT: Entering runlevel: 5 [2025-09-24 01:40:56.680] mtd24 attached [2025-09-24 01:40:56.696] mtd28 attached [2025-09-24 01:40:56.712] mtd32 attached [2025-09-24 01:40:56.743] ubi0:textures is mounted. [2025-09-24 01:40:56.759] ubi1:animations is mounted. [2025-09-24 01:40:56.759] RTNETLINK answers: File exists [2025-09-24 01:40:56.818] ubi2:dml_code is mounted. [2025-09-24 01:40:56.818] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:40:56.818] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:40:56.818] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:40:56.818] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:40:56.818] data.LB_FadeInType0=100 [2025-09-24 01:40:56.818] data.CHLH_FadeInType0=0 [2025-09-24 01:40:56.818] data.WU_FadeInDelay=0 [2025-09-24 01:40:56.818] max_time_out=0 [2025-09-24 01:40:56.818] No splash screen [2025-09-24 01:40:56.818] stop dss Done [2025-09-24 01:40:56.818] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:40:56.890] /dev/mem opened. [2025-09-24 01:40:56.890] Memory mapped at address 0xffffbe93d000. [2025-09-24 01:40:56.890] Read at address 0x00600018 (0xffffbe93d018): 0x00000000 [2025-09-24 01:40:56.890] Write at address 0x00600018 (0xffffbe93d018): 0x00400040, readback 0x00400040 [2025-09-24 01:40:56.906] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:40:56.906] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:40:57.082] Loaded PowerVR consumer services. [2025-09-24 01:40:57.114] 512+0 records in [2025-09-24 01:40:57.114] 512+0 records out [2025-09-24 01:40:57.146] Waiting data available... [2025-09-24 01:40:57.162] Starting syslogd/klogd: done [2025-09-24 01:40:57.194] DML Start [2025-09-24 01:40:57.369] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:40:57.610] DML res1: 0 [2025-09-24 01:40:58.102] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:40:58.102] Read Success [2025-09-24 01:40:58.102] Verifying certificate... [2025-09-24 01:40:58.342] Verified OK [2025-09-24 01:40:58.358] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:41:00.177] Verified OK [2025-09-24 01:41:00.177] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:41:00.610] Verified OK [2025-09-24 01:41:00.631] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:41:03.045] fs.protected_hardlinks = 1 [2025-09-24 01:41:03.061] fs.protected_symlinks = 1 [2025-09-24 01:41:03.061] kernel.modules_disabled = 1 [2025-09-24 01:41:03.253] [2025-09-24 01:41:03.253] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:41:04.693] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:41:12.529] SBL1:1210.0.1.0 [2025-09-24 01:41:12.561] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:41:14.143] SBL2:1210.0.1.0 [2025-09-24 01:41:14.175] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:41:14.287] j-A [2025-09-24 01:41:21.625] The R5 Autosar Classic is running [2025-09-24 01:41:21.656] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:41:21.656] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:41:22.264] INIT: version 2.96 booting [2025-09-24 01:41:22.376] INIT: Entering runlevel: 5 [2025-09-24 01:41:22.520] mtd24 attached [2025-09-24 01:41:22.536] mtd32 attached [2025-09-24 01:41:22.552] mtd28 attached [2025-09-24 01:41:22.600] RTNETLINK answers: File exists [2025-09-24 01:41:22.600] ubi0:textures is mounted. [2025-09-24 01:41:22.657] ubi1:dml_code is mounted. [2025-09-24 01:41:22.657] ubi2:animations is mounted. [2025-09-24 01:41:22.657] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:41:22.657] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:41:22.657] data.LB_FadeInType0=100 [2025-09-24 01:41:22.657] data.CHLH_FadeInType0=0 [2025-09-24 01:41:22.657] data.WU_FadeInDelay=0 [2025-09-24 01:41:22.657] max_time_out=0 [2025-09-24 01:41:22.657] No splash screen [2025-09-24 01:41:22.657] stop dss Done [2025-09-24 01:41:22.657] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:41:22.657] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:41:22.657] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:41:22.688] /dev/mem opened. [2025-09-24 01:41:22.688] Memory mapped at address 0xffff9edc0000. [2025-09-24 01:41:22.715] Read at address 0x00600018 (0xffff9edc0018): 0x00000000 [2025-09-24 01:41:22.715] Write at address 0x00600018 (0xffff9edc0018): 0x00400040, readback 0x00400040 [2025-09-24 01:41:22.747] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:41:22.747] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:41:22.843] Loaded PowerVR consumer services. [2025-09-24 01:41:22.970] 512+0 records in [2025-09-24 01:41:22.970] 512+0 records out [2025-09-24 01:41:22.986] Waiting data available... [2025-09-24 01:41:23.018] Starting syslogd/klogd: done [2025-09-24 01:41:23.035] DML Start [2025-09-24 01:41:23.210] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:41:23.435] DML res1: 0 [2025-09-24 01:41:23.872] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:41:23.872] Read Success [2025-09-24 01:41:23.872] Verifying certificate... [2025-09-24 01:41:24.112] Verified OK [2025-09-24 01:41:24.128] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:41:25.866] Verified OK [2025-09-24 01:41:25.866] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:41:26.489] Verified OK [2025-09-24 01:41:26.489] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:41:29.096] fs.protected_hardlinks = 1 [2025-09-24 01:41:29.096] fs.protected_symlinks = 1 [2025-09-24 01:41:29.112] kernel.modules_disabled = 1 [2025-09-24 01:41:29.288] [2025-09-24 01:41:29.288] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:41:30.532] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:41:38.377] SBL1:1210.0.1.0 [2025-09-24 01:41:38.409] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:41:39.992] SBL2:1210.0.1.0 [2025-09-24 01:41:40.024] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:41:40.120] j-A [2025-09-24 01:41:47.473] The R5 Autosar Classic is running [2025-09-24 01:41:47.498] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:41:47.498] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:41:48.106] INIT: version 2.96 booting [2025-09-24 01:41:48.218] INIT: Entering runlevel: 5 [2025-09-24 01:41:48.378] mtd24 attached [2025-09-24 01:41:48.378] mtd28 attached [2025-09-24 01:41:48.394] mtd32 attached [2025-09-24 01:41:48.442] ubi0:textures is mounted. [2025-09-24 01:41:48.442] RTNETLINK answers: File exists [2025-09-24 01:41:48.478] ubi2:dml_code is mounted. [2025-09-24 01:41:48.478] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:41:48.478] ubi1:animations is mounted. [2025-09-24 01:41:48.478] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:41:48.478] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:41:48.478] data.LB_FadeInType0=100 [2025-09-24 01:41:48.514] data.CHLH_FadeInType0=0 [2025-09-24 01:41:48.514] data.WU_FadeInDelay=0 [2025-09-24 01:41:48.514] max_time_out=0 [2025-09-24 01:41:48.514] No splash screen [2025-09-24 01:41:48.514] stop dss Done [2025-09-24 01:41:48.514] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:41:48.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:41:48.546] /dev/mem opened. [2025-09-24 01:41:48.584] Memory mapped at address 0xffff9328b000. [2025-09-24 01:41:48.584] Read at address 0x00600018 (0xffff9328b018): 0x00000000 [2025-09-24 01:41:48.584] Write at address 0x00600018 (0xffff9328b018): 0x00400040, readback 0x00400040 [2025-09-24 01:41:48.584] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:41:48.584] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:41:48.696] Loaded PowerVR consumer services. [2025-09-24 01:41:48.807] Waiting data available... [2025-09-24 01:41:48.824] 512+0 records in [2025-09-24 01:41:48.824] 512+0 records out [2025-09-24 01:41:48.839] Starting syslogd/klogd: done [2025-09-24 01:41:48.855] DML Start [2025-09-24 01:41:49.048] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:41:49.288] DML res1: 0 [2025-09-24 01:41:49.761] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:41:49.761] Read Success [2025-09-24 01:41:49.761] Verifying certificate... [2025-09-24 01:41:50.033] Verified OK [2025-09-24 01:41:50.049] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:41:51.711] Verified OK [2025-09-24 01:41:51.711] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:41:52.334] Verified OK [2025-09-24 01:41:52.334] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:41:54.845] fs.protected_hardlinks = 1 [2025-09-24 01:41:54.861] fs.protected_symlinks = 1 [2025-09-24 01:41:54.877] kernel.modules_disabled = 1 [2025-09-24 01:41:55.069] [2025-09-24 01:41:55.069] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:41:56.360] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:42:04.228] SBL1:1210.0.1.0 [2025-09-24 01:42:04.276] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:42:05.842] SBL2:1210.0.1.0 [2025-09-24 01:42:05.874] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:42:05.986] j-A [2025-09-24 01:42:13.341] The R5 Autosar Classic is running [2025-09-24 01:42:13.341] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:42:13.362] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:42:13.969] INIT: version 2.96 booting [2025-09-24 01:42:14.081] INIT: Entering runlevel: 5 [2025-09-24 01:42:14.224] mtd28 attached [2025-09-24 01:42:14.240] mtd24 attached [2025-09-24 01:42:14.256] mtd32 attached [2025-09-24 01:42:14.273] ubi0:animations is mounted. [2025-09-24 01:42:14.305] RTNETLINK answers: File exists [2025-09-24 01:42:14.356] ubi1:textures is mounted. [2025-09-24 01:42:14.356] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:42:14.356] ubi2:dml_code is mounted. [2025-09-24 01:42:14.356] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:42:14.356] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:42:14.356] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:42:14.356] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:42:14.356] data.LB_FadeInType0=100 [2025-09-24 01:42:14.356] data.CHLH_FadeInType0=0 [2025-09-24 01:42:14.356] data.WU_FadeInDelay=0 [2025-09-24 01:42:14.356] max_time_out=0 [2025-09-24 01:42:14.356] No splash screen [2025-09-24 01:42:14.356] stop dss Done [2025-09-24 01:42:14.388] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:42:14.404] /dev/mem opened. [2025-09-24 01:42:14.404] Memory mapped at address 0xffffa4f95000. [2025-09-24 01:42:14.436] Read at address 0x00600018 (0xffffa4f95018): 0x00000000 [2025-09-24 01:42:14.436] Write at address 0x00600018 (0xffffa4f95018): 0x00400040, readback 0x00400040 [2025-09-24 01:42:14.436] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:42:14.628] Loaded PowerVR consumer services. [2025-09-24 01:42:14.675] 512+0 records in [2025-09-24 01:42:14.675] 512+0 records out [2025-09-24 01:42:14.675] Waiting data available... [2025-09-24 01:42:14.707] Starting syslogd/klogd: done [2025-09-24 01:42:14.723] DML Start [2025-09-24 01:42:14.898] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:42:15.122] DML res1: 0 [2025-09-24 01:42:15.608] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:42:15.608] Read Success [2025-09-24 01:42:15.608] Verifying certificate... [2025-09-24 01:42:15.847] Verified OK [2025-09-24 01:42:15.863] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:42:17.520] Verified OK [2025-09-24 01:42:17.520] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:42:18.141] Verified OK [2025-09-24 01:42:18.141] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:42:20.733] fs.protected_hardlinks = 1 [2025-09-24 01:42:20.733] fs.protected_symlinks = 1 [2025-09-24 01:42:20.748] kernel.modules_disabled = 1 [2025-09-24 01:42:20.940] [2025-09-24 01:42:20.940] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:42:22.213] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:42:30.060] SBL1:1210.0.1.0 [2025-09-24 01:42:30.108] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:42:31.674] SBL2:1210.0.1.0 [2025-09-24 01:42:31.722] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:42:31.819] j-A [2025-09-24 01:42:39.173] The R5 Autosar Classic is running [2025-09-24 01:42:39.196] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:42:39.196] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:42:39.804] INIT: version 2.96 booting [2025-09-24 01:42:39.915] INIT: Entering runlevel: 5 [2025-09-24 01:42:40.076] mtd24 attached [2025-09-24 01:42:40.076] mtd32 attached [2025-09-24 01:42:40.092] mtd28 attached [2025-09-24 01:42:40.108] ubi0:textures is mounted. [2025-09-24 01:42:40.164] ubi2:animations is mounted. [2025-09-24 01:42:40.164] ubi1:dml_code is mounted. [2025-09-24 01:42:40.164] RTNETLINK answers: File exists [2025-09-24 01:42:40.209] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:42:40.209] data.LB_FadeInType0=100 [2025-09-24 01:42:40.209] data.CHLH_FadeInType0=0 [2025-09-24 01:42:40.209] data.WU_FadeInDelay=0 [2025-09-24 01:42:40.209] max_time_out=0 [2025-09-24 01:42:40.209] No splash screen [2025-09-24 01:42:40.209] stop dss Done [2025-09-24 01:42:40.209] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:42:40.209] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:42:40.209] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:42:40.209] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:42:40.241] /dev/mem opened. [2025-09-24 01:42:40.241] Memory mapped at address 0xffff9105f000. [2025-09-24 01:42:40.266] Read at address 0x00600018 (0xffff9105f018): 0x00000000 [2025-09-24 01:42:40.266] Write at address 0x00600018 (0xffff9105f018): 0x00400040, readback 0x00400040 [2025-09-24 01:42:40.298] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:42:40.314] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:42:40.475] Loaded PowerVR consumer services. [2025-09-24 01:42:40.491] 512+0 records in [2025-09-24 01:42:40.491] 512+0 records out [2025-09-24 01:42:40.554] Starting syslogd/klogd: done [2025-09-24 01:42:40.586] Waiting data available... [2025-09-24 01:42:40.586] DML Start [2025-09-24 01:42:40.778] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:42:41.002] DML res1: 0 [2025-09-24 01:42:41.433] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:42:41.459] Read Success [2025-09-24 01:42:41.459] Verifying certificate... [2025-09-24 01:42:41.748] Verified OK [2025-09-24 01:42:41.764] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:42:43.394] Verified OK [2025-09-24 01:42:43.410] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:42:43.984] Verified OK [2025-09-24 01:42:43.984] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:42:46.559] fs.protected_hardlinks = 1 [2025-09-24 01:42:46.559] fs.protected_symlinks = 1 [2025-09-24 01:42:46.575] kernel.modules_disabled = 1 [2025-09-24 01:42:46.767] [2025-09-24 01:42:46.767] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:42:48.077] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:42:55.916] SBL1:1210.0.1.0 [2025-09-24 01:42:55.948] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:42:57.531] SBL2:1210.0.1.0 [2025-09-24 01:42:57.563] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:42:57.675] j-A [2025-09-24 01:43:05.014] The R5 Autosar Classic is running [2025-09-24 01:43:05.040] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:43:05.040] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:43:05.646] INIT: version 2.96 booting [2025-09-24 01:43:05.759] INIT: Entering runlevel: 5 [2025-09-24 01:43:05.918] mtd28 attached [2025-09-24 01:43:05.918] mtd24 attached [2025-09-24 01:43:05.934] mtd32 attached [2025-09-24 01:43:05.982] RTNETLINK answers: File exists [2025-09-24 01:43:06.054] ubi0:animations is mounted. [2025-09-24 01:43:06.054] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:43:06.054] ubi1:textures is mounted. [2025-09-24 01:43:06.054] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:43:06.054] ubi2:dml_code is mounted. [2025-09-24 01:43:06.054] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:43:06.054] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:43:06.054] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:43:06.054] data.LB_FadeInType0=100 [2025-09-24 01:43:06.054] data.CHLH_FadeInType0=0 [2025-09-24 01:43:06.054] data.WU_FadeInDelay=0 [2025-09-24 01:43:06.054] max_time_out=0 [2025-09-24 01:43:06.054] No splash screen [2025-09-24 01:43:06.054] stop dss Done [2025-09-24 01:43:06.130] /dev/mem opened. [2025-09-24 01:43:06.130] Memory mapped at address 0xffff9bd41000. [2025-09-24 01:43:06.130] Read at address 0x00600018 (0xffff9bd41018): 0x00000000 [2025-09-24 01:43:06.130] Write at address 0x00600018 (0xffff9bd41018): 0x00400040, readback 0x00400040 [2025-09-24 01:43:06.130] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:43:06.130] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:43:06.338] Loaded PowerVR consumer services. [2025-09-24 01:43:06.354] 512+0 records in [2025-09-24 01:43:06.354] 512+0 records out [2025-09-24 01:43:06.386] Waiting data available... [2025-09-24 01:43:06.418] Starting syslogd/klogd: done [2025-09-24 01:43:06.434] DML Start [2025-09-24 01:43:06.610] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:43:06.818] DML res1: 0 [2025-09-24 01:43:07.260] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:43:07.260] Read Success [2025-09-24 01:43:07.260] Verifying certificate... [2025-09-24 01:43:07.485] Verified OK [2025-09-24 01:43:07.501] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:43:09.057] Verified OK [2025-09-24 01:43:09.057] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:43:09.713] Verified OK [2025-09-24 01:43:09.713] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:43:12.558] fs.protected_hardlinks = 1 [2025-09-24 01:43:12.558] fs.protected_symlinks = 1 [2025-09-24 01:43:12.574] kernel.modules_disabled = 1 [2025-09-24 01:43:12.783] [2025-09-24 01:43:12.783] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:43:13.934] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:43:21.739] SBL1:1210.0.1.0 [2025-09-24 01:43:21.787] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:43:23.354] SBL2:1210.0.1.0 [2025-09-24 01:43:23.386] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:43:23.497] j-A [2025-09-24 01:43:30.853] The R5 Autosar Classic is running [2025-09-24 01:43:30.853] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:43:30.874] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:43:31.483] INIT: version 2.96 booting [2025-09-24 01:43:31.594] INIT: Entering runlevel: 5 [2025-09-24 01:43:31.738] mtd24 attached [2025-09-24 01:43:31.754] mtd32 attached [2025-09-24 01:43:31.770] mtd28 attached [2025-09-24 01:43:31.802] RTNETLINK answers: File exists [2025-09-24 01:43:31.851] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:43:31.851] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:43:31.851] ubi0:textures is mounted. [2025-09-24 01:43:31.851] ubi1:dml_code is mounted. [2025-09-24 01:43:31.851] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:43:31.851] ubi2:animations is mounted. [2025-09-24 01:43:31.851] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:43:31.851] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:43:31.877] data.LB_FadeInType0=100 [2025-09-24 01:43:31.877] data.CHLH_FadeInType0=0 [2025-09-24 01:43:31.877] data.WU_FadeInDelay=0 [2025-09-24 01:43:31.877] max_time_out=0 [2025-09-24 01:43:31.877] No splash screen [2025-09-24 01:43:31.877] stop dss Done [2025-09-24 01:43:31.925] /dev/mem opened. [2025-09-24 01:43:31.925] Memory mapped at address 0xffff89ee4000. [2025-09-24 01:43:31.957] Read at address 0x00600018 (0xffff89ee4018): 0x00000000 [2025-09-24 01:43:31.957] Write at address 0x00600018 (0xffff89ee4018): 0x00400040, readback 0x00400040 [2025-09-24 01:43:31.957] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:43:31.957] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:43:32.149] Loaded PowerVR consumer services. [2025-09-24 01:43:32.213] 512+0 records in [2025-09-24 01:43:32.213] 512+0 records out [2025-09-24 01:43:32.213] Waiting data available... [2025-09-24 01:43:32.245] Starting syslogd/klogd: done [2025-09-24 01:43:32.261] DML Start [2025-09-24 01:43:32.453] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:43:32.709] DML res1: 0 [2025-09-24 01:43:33.035] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:43:33.035] Read Success [2025-09-24 01:43:33.035] Verifying certificate... [2025-09-24 01:43:33.291] Verified OK [2025-09-24 01:43:33.307] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:43:34.885] Verified OK [2025-09-24 01:43:34.885] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:43:35.485] Verified OK [2025-09-24 01:43:35.485] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:43:38.283] fs.protected_hardlinks = 1 [2025-09-24 01:43:38.299] fs.protected_symlinks = 1 [2025-09-24 01:43:38.299] kernel.modules_disabled = 1 [2025-09-24 01:43:38.506] [2025-09-24 01:43:38.506] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:43:39.749] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:43:47.576] SBL1:1210.0.1.0 [2025-09-24 01:43:47.624] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:43:49.191] SBL2:1210.0.1.0 [2025-09-24 01:43:49.238] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:43:49.335] j-A [2025-09-24 01:43:56.691] The R5 Autosar Classic is running [2025-09-24 01:43:56.714] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:43:56.714] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:43:57.322] INIT: version 2.96 booting [2025-09-24 01:43:57.433] INIT: Entering runlevel: 5 [2025-09-24 01:43:57.577] mtd24 attached [2025-09-24 01:43:57.593] mtd32 attached [2025-09-24 01:43:57.609] mtd28 attached [2025-09-24 01:43:57.641] ubi0:textures is mounted. [2025-09-24 01:43:57.657] RTNETLINK answers: File exists [2025-09-24 01:43:57.657] ubi1:dml_code is mounted. [2025-09-24 01:43:57.715] ubi2:animations is mounted. [2025-09-24 01:43:57.715] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:43:57.715] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:43:57.715] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:43:57.715] data.LB_FadeInType0=100 [2025-09-24 01:43:57.715] data.CHLH_FadeInType0=0 [2025-09-24 01:43:57.715] data.WU_FadeInDelay=0 [2025-09-24 01:43:57.715] max_time_out=0 [2025-09-24 01:43:57.715] No splash screen [2025-09-24 01:43:57.715] stop dss Done [2025-09-24 01:43:57.715] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:43:57.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:43:57.792] /dev/mem opened. [2025-09-24 01:43:57.792] Memory mapped at address 0xffff818bb000. [2025-09-24 01:43:57.792] Read at address 0x00600018 (0xffff818bb018): 0x00000000 [2025-09-24 01:43:57.792] Write at address 0x00600018 (0xffff818bb018): 0x00400040, readback 0x00400040 [2025-09-24 01:43:57.792] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:43:57.792] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:43:57.983] Loaded PowerVR consumer services. [2025-09-24 01:43:58.038] Waiting data available... [2025-09-24 01:43:58.038] 512+0 records in [2025-09-24 01:43:58.038] 512+0 records out [2025-09-24 01:43:58.071] Starting syslogd/klogd: done [2025-09-24 01:43:58.087] DML Start [2025-09-24 01:43:58.278] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:43:58.502] DML res1: 0 [2025-09-24 01:43:58.886] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:43:58.907] Read Success [2025-09-24 01:43:58.907] Verifying certificate... [2025-09-24 01:43:59.179] Verified OK [2025-09-24 01:43:59.195] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:44:00.857] Verified OK [2025-09-24 01:44:00.873] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:44:01.465] Verified OK [2025-09-24 01:44:01.465] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:44:04.101] fs.protected_hardlinks = 1 [2025-09-24 01:44:04.101] fs.protected_symlinks = 1 [2025-09-24 01:44:04.101] kernel.modules_disabled = 1 [2025-09-24 01:44:04.276] [2025-09-24 01:44:04.276] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:44:05.598] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:44:13.441] SBL1:1210.0.1.0 [2025-09-24 01:44:13.472] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:44:15.055] SBL2:1210.0.1.0 [2025-09-24 01:44:15.087] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:44:15.199] j-A [2025-09-24 01:44:22.539] The R5 Autosar Classic is running [2025-09-24 01:44:22.564] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:44:22.564] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:44:23.172] INIT: version 2.96 booting [2025-09-24 01:44:23.284] INIT: Entering runlevel: 5 [2025-09-24 01:44:23.444] mtd32 attached [2025-09-24 01:44:23.444] mtd28 attached [2025-09-24 01:44:23.460] mtd24 attached [2025-09-24 01:44:23.507] ubi0:dml_code is mounted. [2025-09-24 01:44:23.507] RTNETLINK answers: File exists [2025-09-24 01:44:23.567] ubi1:animations is mounted. [2025-09-24 01:44:23.567] ubi2:textures is mounted. [2025-09-24 01:44:23.567] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:44:23.567] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:44:23.567] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:44:23.567] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:44:23.567] data.LB_FadeInType0=100 [2025-09-24 01:44:23.567] data.CHLH_FadeInType0=0 [2025-09-24 01:44:23.567] data.WU_FadeInDelay=0 [2025-09-24 01:44:23.567] max_time_out=0 [2025-09-24 01:44:23.567] No splash screen [2025-09-24 01:44:23.567] stop dss Done [2025-09-24 01:44:23.567] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:44:23.655] /dev/mem opened. [2025-09-24 01:44:23.655] Memory mapped at address 0xffff91564000. [2025-09-24 01:44:23.655] Read at address 0x00600018 (0xffff91564018): 0x00000000 [2025-09-24 01:44:23.655] Write at address 0x00600018 (0xffff91564018): 0x00400040, readback 0x00400040 [2025-09-24 01:44:23.655] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:44:23.655] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:44:23.831] Loaded PowerVR consumer services. [2025-09-24 01:44:23.879] 512+0 records in [2025-09-24 01:44:23.879] 512+0 records out [2025-09-24 01:44:23.927] Starting syslogd/klogd: done [2025-09-24 01:44:23.943] Waiting data available... [2025-09-24 01:44:23.943] DML Start [2025-09-24 01:44:24.150] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:44:24.390] DML res1: 0 [2025-09-24 01:44:24.779] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:44:24.779] Read Success [2025-09-24 01:44:24.779] Verifying certificate... [2025-09-24 01:44:25.019] Verified OK [2025-09-24 01:44:25.035] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:44:26.661] Verified OK [2025-09-24 01:44:26.661] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:44:27.308] Verified OK [2025-09-24 01:44:27.308] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:44:30.010] fs.protected_hardlinks = 1 [2025-09-24 01:44:30.026] fs.protected_symlinks = 1 [2025-09-24 01:44:30.026] kernel.modules_disabled = 1 [2025-09-24 01:44:30.218] [2025-09-24 01:44:30.218] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:44:31.440] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:44:39.256] SBL1:1210.0.1.0 [2025-09-24 01:44:39.304] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:44:40.887] SBL2:1210.0.1.0 [2025-09-24 01:44:40.919] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:44:41.014] j-A [2025-09-24 01:44:48.370] The R5 Autosar Classic is running [2025-09-24 01:44:48.394] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:44:48.394] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:44:49.001] INIT: version 2.96 booting [2025-09-24 01:44:49.114] INIT: Entering runlevel: 5 [2025-09-24 01:44:49.257] mtd28 attached [2025-09-24 01:44:49.273] mtd24 attached [2025-09-24 01:44:49.289] mtd32 attached [2025-09-24 01:44:49.337] RTNETLINK answers: File exists [2025-09-24 01:44:49.337] ubi0:animations is mounted. [2025-09-24 01:44:49.394] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:44:49.394] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:44:49.394] ubi2:dml_code is mounted. [2025-09-24 01:44:49.394] ubi1:textures is mounted. [2025-09-24 01:44:49.394] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:44:49.394] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:44:49.394] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:44:49.394] data.LB_FadeInType0=100 [2025-09-24 01:44:49.394] data.CHLH_FadeInType0=0 [2025-09-24 01:44:49.394] data.WU_FadeInDelay=0 [2025-09-24 01:44:49.394] max_time_out=0 [2025-09-24 01:44:49.394] No splash screen [2025-09-24 01:44:49.394] stop dss Done [2025-09-24 01:44:49.442] /dev/mem opened. [2025-09-24 01:44:49.474] Memory mapped at address 0xffff953a2000. [2025-09-24 01:44:49.474] Read at address 0x00600018 (0xffff953a2018): 0x00000000 [2025-09-24 01:44:49.474] Write at address 0x00600018 (0xffff953a2018): 0x00400040, readback 0x00400040 [2025-09-24 01:44:49.491] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:44:49.507] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:44:49.634] Loaded PowerVR consumer services. [2025-09-24 01:44:49.714] 512+0 records in [2025-09-24 01:44:49.714] 512+0 records out [2025-09-24 01:44:49.746] Waiting data available... [2025-09-24 01:44:49.778] Starting syslogd/klogd: done [2025-09-24 01:44:49.794] DML Start [2025-09-24 01:44:49.986] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:44:50.178] DML res1: 0 [2025-09-24 01:44:50.671] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:44:50.671] Read Success [2025-09-24 01:44:50.671] Verifying certificate... [2025-09-24 01:44:50.895] Verified OK [2025-09-24 01:44:50.911] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:44:52.653] Verified OK [2025-09-24 01:44:52.653] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:44:53.289] Verified OK [2025-09-24 01:44:53.289] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:44:55.832] fs.protected_hardlinks = 1 [2025-09-24 01:44:55.832] fs.protected_symlinks = 1 [2025-09-24 01:44:55.832] kernel.modules_disabled = 1 [2025-09-24 01:44:56.040] [2025-09-24 01:44:56.040] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:44:57.309] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:45:05.108] SBL1:1210.0.1.0 [2025-09-24 01:45:05.140] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:45:06.723] SBL2:1210.0.1.0 [2025-09-24 01:45:06.755] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:45:06.867] j-A [2025-09-24 01:45:14.206] The R5 Autosar Classic is running [2025-09-24 01:45:14.237] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:45:14.237] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:45:14.845] INIT: version 2.96 booting [2025-09-24 01:45:14.941] INIT: Entering runlevel: 5 [2025-09-24 01:45:15.101] mtd24 attached [2025-09-24 01:45:15.117] mtd28 attached [2025-09-24 01:45:15.117] mtd32 attached [2025-09-24 01:45:15.165] ubi0:textures is mounted. [2025-09-24 01:45:15.181] RTNETLINK answers: File exists [2025-09-24 01:45:15.181] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:45:15.236] ubi1:animations is mounted. [2025-09-24 01:45:15.236] ubi2:dml_code is mounted. [2025-09-24 01:45:15.236] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:45:15.236] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:45:15.236] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:45:15.236] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:45:15.236] data.LB_FadeInType0=100 [2025-09-24 01:45:15.236] data.CHLH_FadeInType0=0 [2025-09-24 01:45:15.236] data.WU_FadeInDelay=0 [2025-09-24 01:45:15.236] max_time_out=0 [2025-09-24 01:45:15.236] No splash screen [2025-09-24 01:45:15.236] stop dss Done [2025-09-24 01:45:15.314] /dev/mem opened. [2025-09-24 01:45:15.314] Memory mapped at address 0xffffa0bdc000. [2025-09-24 01:45:15.314] Read at address 0x00600018 (0xffffa0bdc018): 0x00000000 [2025-09-24 01:45:15.314] Write at address 0x00600018 (0xffffa0bdc018): 0x00400040, readback 0x00400040 [2025-09-24 01:45:15.314] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:45:15.314] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:45:15.506] Loaded PowerVR consumer services. [2025-09-24 01:45:15.538] 512+0 records in [2025-09-24 01:45:15.538] 512+0 records out [2025-09-24 01:45:15.554] Waiting data available... [2025-09-24 01:45:15.569] Starting syslogd/klogd: done [2025-09-24 01:45:15.585] DML Start [2025-09-24 01:45:15.777] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:45:16.002] DML res1: 0 [2025-09-24 01:45:16.449] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:45:16.470] Read Success [2025-09-24 01:45:16.470] Verifying certificate... [2025-09-24 01:45:16.727] Verified OK [2025-09-24 01:45:16.742] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:45:18.405] Verified OK [2025-09-24 01:45:18.405] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:45:19.056] Verified OK [2025-09-24 01:45:19.056] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:45:21.727] fs.protected_hardlinks = 1 [2025-09-24 01:45:21.743] fs.protected_symlinks = 1 [2025-09-24 01:45:21.743] kernel.modules_disabled = 1 [2025-09-24 01:45:21.935] [2025-09-24 01:45:21.935] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:45:23.070] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:45:30.952] SBL1:1210.0.1.0 [2025-09-24 01:45:31.000] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:45:32.567] SBL2:1210.0.1.0 [2025-09-24 01:45:32.614] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:45:32.710] j-A [2025-09-24 01:45:40.065] The R5 Autosar Classic is running [2025-09-24 01:45:40.087] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:45:40.087] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:45:40.694] INIT: version 2.96 booting [2025-09-24 01:45:40.807] INIT: Entering runlevel: 5 [2025-09-24 01:45:40.967] mtd28 attached [2025-09-24 01:45:40.982] mtd24 attached [2025-09-24 01:45:40.998] ubi0:animations is mounted. [2025-09-24 01:45:41.014] mtd32 attached [2025-09-24 01:45:41.030] ubi1:textures is mounted. [2025-09-24 01:45:41.046] RTNETLINK answers: File exists [2025-09-24 01:45:41.046] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:45:41.068] ubi2:dml_code is mounted. [2025-09-24 01:45:41.068] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:45:41.068] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:45:41.103] data.LB_FadeInType0=100 [2025-09-24 01:45:41.103] data.CHLH_FadeInType0=0 [2025-09-24 01:45:41.103] data.WU_FadeInDelay=0 [2025-09-24 01:45:41.103] max_time_out=0 [2025-09-24 01:45:41.103] No splash screen [2025-09-24 01:45:41.103] stop dss Done [2025-09-24 01:45:41.103] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:45:41.103] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:45:41.158] /dev/mem opened. [2025-09-24 01:45:41.158] Memory mapped at address 0xffffa59b5000. [2025-09-24 01:45:41.158] Read at address 0x00600018 (0xffffa59b5018): 0x00000000 [2025-09-24 01:45:41.158] Write at address 0x00600018 (0xffffa59b5018): 0x00400040, readback 0x00400040 [2025-09-24 01:45:41.174] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:45:41.190] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:45:41.319] Loaded PowerVR consumer services. [2025-09-24 01:45:41.414] 512+0 records in [2025-09-24 01:45:41.414] 512+0 records out [2025-09-24 01:45:41.414] Waiting data available... [2025-09-24 01:45:41.462] Starting syslogd/klogd: done [2025-09-24 01:45:41.478] DML Start [2025-09-24 01:45:41.686] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:45:41.910] DML res1: 0 [2025-09-24 01:45:42.294] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:45:42.315] Read Success [2025-09-24 01:45:42.315] Verifying certificate... [2025-09-24 01:45:42.539] Verified OK [2025-09-24 01:45:42.555] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:45:44.244] Verified OK [2025-09-24 01:45:44.244] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:45:44.876] Verified OK [2025-09-24 01:45:44.876] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:45:47.531] fs.protected_hardlinks = 1 [2025-09-24 01:45:47.547] fs.protected_symlinks = 1 [2025-09-24 01:45:47.547] kernel.modules_disabled = 1 [2025-09-24 01:45:47.755] [2025-09-24 01:45:47.755] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:45:48.975] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:45:56.807] SBL1:1210.0.1.0 [2025-09-24 01:45:56.839] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:45:58.422] SBL2:1210.0.1.0 [2025-09-24 01:45:58.453] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:45:58.566] j-A [2025-09-24 01:46:05.904] The R5 Autosar Classic is running [2025-09-24 01:46:05.935] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:46:05.935] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:46:06.543] INIT: version 2.96 booting [2025-09-24 01:46:06.655] INIT: Entering runlevel: 5 [2025-09-24 01:46:06.815] mtd24 attached [2025-09-24 01:46:06.815] mtd28 attached [2025-09-24 01:46:06.831] mtd32 attached [2025-09-24 01:46:06.938] ubi0:textures is mounted. [2025-09-24 01:46:06.938] RTNETLINK answers: File exists [2025-09-24 01:46:06.938] ubi1:animations is mounted. [2025-09-24 01:46:06.938] ubi2:dml_code is mounted. [2025-09-24 01:46:06.938] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:46:06.938] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:46:06.938] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:46:06.938] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:46:06.938] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:46:06.938] data.LB_FadeInType0=100 [2025-09-24 01:46:06.938] data.CHLH_FadeInType0=0 [2025-09-24 01:46:06.938] data.WU_FadeInDelay=0 [2025-09-24 01:46:06.938] max_time_out=0 [2025-09-24 01:46:06.938] No splash screen [2025-09-24 01:46:06.938] stop dss Done [2025-09-24 01:46:07.016] /dev/mem opened. [2025-09-24 01:46:07.016] Memory mapped at address 0xffffb82df000. [2025-09-24 01:46:07.016] Read at address 0x00600018 (0xffffb82df018): 0x00000000 [2025-09-24 01:46:07.016] Write at address 0x00600018 (0xffffb82df018): 0x00400040, readback 0x00400040 [2025-09-24 01:46:07.016] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:46:07.016] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:46:07.207] Loaded PowerVR consumer services. [2025-09-24 01:46:07.240] Waiting data available... [2025-09-24 01:46:07.272] 512+0 records in [2025-09-24 01:46:07.272] 512+0 records out [2025-09-24 01:46:07.320] Starting syslogd/klogd: done [2025-09-24 01:46:07.336] DML Start [2025-09-24 01:46:07.511] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:46:07.735] DML res1: 0 [2025-09-24 01:46:08.179] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:46:08.179] Read Success [2025-09-24 01:46:08.179] Verifying certificate... [2025-09-24 01:46:08.418] Verified OK [2025-09-24 01:46:08.434] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:46:10.141] Verified OK [2025-09-24 01:46:10.141] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:46:10.749] Verified OK [2025-09-24 01:46:10.749] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:46:13.372] fs.protected_hardlinks = 1 [2025-09-24 01:46:13.388] fs.protected_symlinks = 1 [2025-09-24 01:46:13.388] kernel.modules_disabled = 1 [2025-09-24 01:46:13.579] [2025-09-24 01:46:13.579] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:46:14.770] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:46:22.653] SBL1:1210.0.1.0 [2025-09-24 01:46:22.701] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:46:24.267] SBL2:1210.0.1.0 [2025-09-24 01:46:24.299] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:46:24.411] j-A [2025-09-24 01:46:31.766] The R5 Autosar Classic is running [2025-09-24 01:46:31.766] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:46:31.787] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:46:32.394] INIT: version 2.96 booting [2025-09-24 01:46:32.506] INIT: Entering runlevel: 5 [2025-09-24 01:46:32.665] mtd24 attached [2025-09-24 01:46:32.665] mtd28 attached [2025-09-24 01:46:32.681] mtd32 attached [2025-09-24 01:46:32.713] ubi0:textures is mounted. [2025-09-24 01:46:32.729] RTNETLINK answers: File exists [2025-09-24 01:46:32.729] ubi1:animations is mounted. [2025-09-24 01:46:32.772] ubi2:dml_code is mounted. [2025-09-24 01:46:32.772] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:46:32.772] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:46:32.772] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:46:32.772] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:46:32.772] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:46:32.794] data.LB_FadeInType0=100 [2025-09-24 01:46:32.794] data.CHLH_FadeInType0=0 [2025-09-24 01:46:32.794] data.WU_FadeInDelay=0 [2025-09-24 01:46:32.794] max_time_out=0 [2025-09-24 01:46:32.794] No splash screen [2025-09-24 01:46:32.794] stop dss Done [2025-09-24 01:46:32.843] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:46:32.875] /dev/mem opened. [2025-09-24 01:46:32.875] Memory mapped at address 0xffff9b16f000. [2025-09-24 01:46:32.875] Read at address 0x00600018 (0xffff9b16f018): 0x00000000 [2025-09-24 01:46:32.875] Write at address 0x00600018 (0xffff9b16f018): 0x00400040, readback 0x00400040 [2025-09-24 01:46:32.875] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:46:33.066] Loaded PowerVR consumer services. [2025-09-24 01:46:33.114] 512+0 records in [2025-09-24 01:46:33.114] 512+0 records out [2025-09-24 01:46:33.130] Starting syslogd/klogd: Waiting data available... [2025-09-24 01:46:33.147] done [2025-09-24 01:46:33.163] DML Start [2025-09-24 01:46:33.338] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:46:33.594] DML res1: 0 [2025-09-24 01:46:33.978] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:46:33.978] Read Success [2025-09-24 01:46:33.994] Verifying certificate... [2025-09-24 01:46:34.250] Verified OK [2025-09-24 01:46:34.265] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:46:35.826] Verified OK [2025-09-24 01:46:35.826] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:46:36.497] Verified OK [2025-09-24 01:46:36.513] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:46:39.120] fs.protected_hardlinks = 1 [2025-09-24 01:46:39.136] fs.protected_symlinks = 1 [2025-09-24 01:46:39.136] kernel.modules_disabled = 1 [2025-09-24 01:46:39.327] [2025-09-24 01:46:39.327] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:46:40.664] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:46:48.491] SBL1:1210.0.1.0 [2025-09-24 01:46:48.539] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:46:50.105] SBL2:1210.0.1.0 [2025-09-24 01:46:50.137] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:46:50.249] j-A [2025-09-24 01:46:57.622] The R5 Autosar Classic is running [2025-09-24 01:46:57.622] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:46:57.622] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:46:58.229] INIT: version 2.96 booting [2025-09-24 01:46:58.342] INIT: Entering runlevel: 5 [2025-09-24 01:46:58.502] mtd32 attached [2025-09-24 01:46:58.518] mtd28 attached [2025-09-24 01:46:58.518] mtd24 attached [2025-09-24 01:46:58.550] ubi0:dml_code is mounted. [2025-09-24 01:46:58.566] RTNETLINK answers: File exists [2025-09-24 01:46:58.606] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:46:58.606] ubi1:animations is mounted. [2025-09-24 01:46:58.606] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:46:58.606] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:46:58.606] ubi2:textures is mounted. [2025-09-24 01:46:58.606] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:46:58.606] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:46:58.628] data.LB_FadeInType0=100 [2025-09-24 01:46:58.628] data.CHLH_FadeInType0=0 [2025-09-24 01:46:58.628] data.WU_FadeInDelay=0 [2025-09-24 01:46:58.628] max_time_out=0 [2025-09-24 01:46:58.628] No splash screen [2025-09-24 01:46:58.628] stop dss Done [2025-09-24 01:46:58.667] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:46:58.667] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:46:58.700] /dev/mem opened. [2025-09-24 01:46:58.700] Memory mapped at address 0xffffbee64000. [2025-09-24 01:46:58.700] Read at address 0x00600018 (0xffffbee64018): 0x00000000 [2025-09-24 01:46:58.700] Write at address 0x00600018 (0xffffbee64018): 0x00400040, readback 0x00400040 [2025-09-24 01:46:58.860] Loaded PowerVR consumer services. [2025-09-24 01:46:58.967] Waiting data available... [2025-09-24 01:46:58.967] 512+0 records in [2025-09-24 01:46:58.967] 512+0 records out [2025-09-24 01:46:59.000] Starting syslogd/klogd: done [2025-09-24 01:46:59.016] DML Start [2025-09-24 01:46:59.207] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:46:59.431] DML res1: 0 [2025-09-24 01:46:59.894] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:46:59.894] Read Success [2025-09-24 01:46:59.894] Verifying certificate... [2025-09-24 01:47:00.166] Verified OK [2025-09-24 01:47:00.182] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:47:01.827] Verified OK [2025-09-24 01:47:01.827] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:47:02.457] Verified OK [2025-09-24 01:47:02.457] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:47:04.998] fs.protected_hardlinks = 1 [2025-09-24 01:47:05.024] fs.protected_symlinks = 1 [2025-09-24 01:47:05.024] kernel.modules_disabled = 1 [2025-09-24 01:47:05.217] [2025-09-24 01:47:05.217] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:47:06.511] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:47:14.328] SBL1:1210.0.1.0 [2025-09-24 01:47:14.376] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 01:47:15.944] SBL2:1210.0.1.0 [2025-09-24 01:47:15.992] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:47:16.087] j-A [2025-09-24 01:47:23.442] The R5 Autosar Classic is running [2025-09-24 01:47:23.466] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:47:23.466] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:47:24.074] INIT: version 2.96 booting [2025-09-24 01:47:24.186] INIT: Entering runlevel: 5 [2025-09-24 01:47:24.346] mtd32 attached [2025-09-24 01:47:24.346] mtd24 attached [2025-09-24 01:47:24.362] mtd28 attached [2025-09-24 01:47:24.393] ubi0:dml_code is mounted. [2025-09-24 01:47:24.409] RTNETLINK answers: File exists [2025-09-24 01:47:24.470] ubi2:animations is mounted. [2025-09-24 01:47:24.470] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:47:24.470] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:47:24.470] ubi1:textures is mounted. [2025-09-24 01:47:24.470] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:47:24.470] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:47:24.470] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:47:24.470] data.LB_FadeInType0=100 [2025-09-24 01:47:24.470] data.CHLH_FadeInType0=0 [2025-09-24 01:47:24.470] data.WU_FadeInDelay=0 [2025-09-24 01:47:24.470] max_time_out=0 [2025-09-24 01:47:24.470] No splash screen [2025-09-24 01:47:24.470] stop dss Done [2025-09-24 01:47:24.556] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:47:24.556] /dev/mem opened. [2025-09-24 01:47:24.556] Memory mapped at address 0xffffa0038000. [2025-09-24 01:47:24.556] Read at address 0x00600018 (0xffffa0038018): 0x00000000 [2025-09-24 01:47:24.556] Write at address 0x00600018 (0xffffa0038018): 0x00400040, readback 0x00400040 [2025-09-24 01:47:24.556] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:47:24.667] Loaded PowerVR consumer services. [2025-09-24 01:47:24.801] 512+0 records in [2025-09-24 01:47:24.801] 512+0 records out [2025-09-24 01:47:24.801] Waiting data available... [2025-09-24 01:47:24.817] Starting syslogd/klogd: done [2025-09-24 01:47:24.834] DML Start [2025-09-24 01:47:25.009] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:47:25.265] DML res1: 0 [2025-09-24 01:47:25.696] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:47:25.717] Read Success [2025-09-24 01:47:25.717] Verifying certificate... [2025-09-24 01:47:25.942] Verified OK [2025-09-24 01:47:25.958] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:47:27.630] Verified OK [2025-09-24 01:47:27.630] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:47:28.231] Verified OK [2025-09-24 01:47:28.231] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:47:30.821] fs.protected_hardlinks = 1 [2025-09-24 01:47:30.836] fs.protected_symlinks = 1 [2025-09-24 01:47:30.836] kernel.modules_disabled = 1 [2025-09-24 01:47:31.028] [2025-09-24 01:47:31.028] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:47:32.340] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:47:40.171] SBL1:1210.0.1.0 [2025-09-24 01:47:40.219] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:47:41.785] SBL2:1210.0.1.0 [2025-09-24 01:47:41.833] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:47:41.930] j-A [2025-09-24 01:47:49.286] The R5 Autosar Classic is running [2025-09-24 01:47:49.286] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:47:49.306] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:47:49.914] INIT: version 2.96 booting [2025-09-24 01:47:50.026] INIT: Entering runlevel: 5 [2025-09-24 01:47:50.186] mtd28 attached [2025-09-24 01:47:50.186] mtd24 attached [2025-09-24 01:47:50.202] mtd32 attached [2025-09-24 01:47:50.250] RTNETLINK answers: File exists [2025-09-24 01:47:50.250] ubi1:textures is mounted. [2025-09-24 01:47:50.312] ubi0:animations is mounted. [2025-09-24 01:47:50.312] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:47:50.312] ubi2:dml_code is mounted. [2025-09-24 01:47:50.312] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:47:50.312] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:47:50.312] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:47:50.312] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:47:50.312] data.LB_FadeInType0=100 [2025-09-24 01:47:50.312] data.CHLH_FadeInType0=0 [2025-09-24 01:47:50.312] data.WU_FadeInDelay=0 [2025-09-24 01:47:50.312] max_time_out=0 [2025-09-24 01:47:50.312] No splash screen [2025-09-24 01:47:50.312] stop dss Done [2025-09-24 01:47:50.397] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:47:50.397] /dev/mem opened. [2025-09-24 01:47:50.397] Memory mapped at address 0xffff9fb3b000. [2025-09-24 01:47:50.397] Read at address 0x00600018 (0xffff9fb3b018): 0x00000000 [2025-09-24 01:47:50.397] Write at address 0x00600018 (0xffff9fb3b018): 0x00400040, readback 0x00400040 [2025-09-24 01:47:50.397] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:47:50.477] Loaded PowerVR consumer services. [2025-09-24 01:47:50.634] Waiting data available... [2025-09-24 01:47:50.634] 512+0 records in [2025-09-24 01:47:50.634] 512+0 records out [2025-09-24 01:47:50.666] Starting syslogd/klogd: done [2025-09-24 01:47:50.682] DML Start [2025-09-24 01:47:50.874] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:47:51.099] DML res1: 0 [2025-09-24 01:47:51.530] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:47:51.551] Read Success [2025-09-24 01:47:51.551] Verifying certificate... [2025-09-24 01:47:51.823] Verified OK [2025-09-24 01:47:51.839] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:47:53.572] Verified OK [2025-09-24 01:47:53.572] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:47:54.188] Verified OK [2025-09-24 01:47:54.188] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:47:56.794] fs.protected_hardlinks = 1 [2025-09-24 01:47:56.794] fs.protected_symlinks = 1 [2025-09-24 01:47:56.810] kernel.modules_disabled = 1 [2025-09-24 01:47:57.002] [2025-09-24 01:47:57.002] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:47:58.213] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:48:00.552] SBL1:1210.0.1.0 [2025-09-24 01:48:06.067] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:48:07.634] SBL2:1210.0.1.0 [2025-09-24 01:48:07.666] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:48:07.779] j-A [2025-09-24 01:48:15.154] The R5 Autosar Classic is running [2025-09-24 01:48:15.154] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:48:15.154] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:48:15.762] INIT: version 2.96 booting [2025-09-24 01:48:15.873] INIT: Entering runlevel: 5 [2025-09-24 01:48:16.018] mtd28 attached [2025-09-24 01:48:16.034] mtd32 attached [2025-09-24 01:48:16.050] mtd24 attached [2025-09-24 01:48:16.065] ubi0:animations is mounted. [2025-09-24 01:48:16.097] RTNETLINK answers: File exists [2025-09-24 01:48:16.151] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:48:16.151] ubi2:textures is mounted. [2025-09-24 01:48:16.151] ubi1:dml_code is mounted. [2025-09-24 01:48:16.151] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:48:16.151] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:48:16.151] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:48:16.151] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:48:16.151] data.LB_FadeInType0=100 [2025-09-24 01:48:16.151] data.CHLH_FadeInType0=0 [2025-09-24 01:48:16.151] data.WU_FadeInDelay=0 [2025-09-24 01:48:16.151] max_time_out=0 [2025-09-24 01:48:16.151] No splash screen [2025-09-24 01:48:16.151] stop dss Done [2025-09-24 01:48:16.200] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:48:16.200] /dev/mem opened. [2025-09-24 01:48:16.232] Memory mapped at address 0xffffb1b30000. [2025-09-24 01:48:16.232] Read at address 0x00600018 (0xffffb1b30018): 0x00000000 [2025-09-24 01:48:16.232] Write at address 0x00600018 (0xffffb1b30018): 0x00400040, readback 0x00400040 [2025-09-24 01:48:16.232] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:48:16.423] Loaded PowerVR consumer services. [2025-09-24 01:48:16.479] Waiting data available... [2025-09-24 01:48:16.479] 512+0 records in [2025-09-24 01:48:16.479] 512+0 records out [2025-09-24 01:48:16.511] Starting syslogd/klogd: done [2025-09-24 01:48:16.527] DML Start [2025-09-24 01:48:16.703] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:48:16.927] DML res1: 0 [2025-09-24 01:48:17.422] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:48:17.443] Read Success [2025-09-24 01:48:17.443] Verifying certificate... [2025-09-24 01:48:17.747] Verified OK [2025-09-24 01:48:17.763] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:48:19.470] Verified OK [2025-09-24 01:48:19.470] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:48:20.046] Verified OK [2025-09-24 01:48:20.062] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:48:22.603] fs.protected_hardlinks = 1 [2025-09-24 01:48:22.619] fs.protected_symlinks = 1 [2025-09-24 01:48:22.619] kernel.modules_disabled = 1 [2025-09-24 01:48:22.827] [2025-09-24 01:48:22.827] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:48:24.022] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:48:31.849] SBL1:1210.0.1.0 [2025-09-24 01:48:31.897] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:48:33.463] SBL2:1210.0.1.0 [2025-09-24 01:48:33.495] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:48:33.608] j-A [2025-09-24 01:48:40.982] The R5 Autosar Classic is running [2025-09-24 01:48:40.982] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:48:40.982] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:48:41.589] INIT: version 2.96 booting [2025-09-24 01:48:41.702] INIT: Entering runlevel: 5 [2025-09-24 01:48:41.846] mtd28 attached [2025-09-24 01:48:41.861] mtd24 attached [2025-09-24 01:48:41.877] mtd32 attached [2025-09-24 01:48:41.909] ubi0:animations is mounted. [2025-09-24 01:48:41.925] ubi1:textures is mounted. [2025-09-24 01:48:41.925] RTNETLINK answers: File exists [2025-09-24 01:48:41.987] ubi2:dml_code is mounted. [2025-09-24 01:48:41.987] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:48:41.987] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:48:41.987] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:48:41.987] data.LB_FadeInType0=100 [2025-09-24 01:48:41.987] data.CHLH_FadeInType0=0 [2025-09-24 01:48:41.987] data.WU_FadeInDelay=0 [2025-09-24 01:48:41.987] max_time_out=0 [2025-09-24 01:48:41.987] No splash screen [2025-09-24 01:48:41.987] stop dss Done [2025-09-24 01:48:41.987] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:48:41.987] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:48:42.019] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:48:42.053] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:48:42.053] /dev/mem opened. [2025-09-24 01:48:42.053] Memory mapped at address 0xffff93930000. [2025-09-24 01:48:42.053] Read at address 0x00600018 (0xffff93930018): 0x00000000 [2025-09-24 01:48:42.053] Write at address 0x00600018 (0xffff93930018): 0x00400040, readback 0x00400040 [2025-09-24 01:48:42.149] Loaded PowerVR consumer services. [2025-09-24 01:48:42.292] Waiting data available... [2025-09-24 01:48:42.308] 512+0 records in [2025-09-24 01:48:42.308] 512+0 records out [2025-09-24 01:48:42.324] Starting syslogd/klogd: done [2025-09-24 01:48:42.340] DML Start [2025-09-24 01:48:42.564] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:48:42.788] DML res1: 0 [2025-09-24 01:48:43.230] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:48:43.230] Read Success [2025-09-24 01:48:43.230] Verifying certificate... [2025-09-24 01:48:43.470] Verified OK [2025-09-24 01:48:43.470] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:48:45.202] Verified OK [2025-09-24 01:48:45.202] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:48:45.805] Verified OK [2025-09-24 01:48:45.805] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:48:48.283] fs.protected_hardlinks = 1 [2025-09-24 01:48:48.283] fs.protected_symlinks = 1 [2025-09-24 01:48:48.298] kernel.modules_disabled = 1 [2025-09-24 01:48:48.507] [2025-09-24 01:48:48.507] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:48:49.849] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:48:57.720] SBL1:1210.0.1.0 [2025-09-24 01:48:57.752] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:48:59.335] SBL2:1210.0.1.0 [2025-09-24 01:48:59.366] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:48:59.479] j-A [2025-09-24 01:49:06.818] The R5 Autosar Classic is running [2025-09-24 01:49:06.843] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:49:06.843] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:49:07.451] INIT: version 2.96 booting [2025-09-24 01:49:07.563] INIT: Entering runlevel: 5 [2025-09-24 01:49:07.723] mtd28 attached [2025-09-24 01:49:07.739] mtd32 attached [2025-09-24 01:49:07.739] mtd24 attached [2025-09-24 01:49:07.787] RTNETLINK answers: File exists [2025-09-24 01:49:07.849] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:49:07.849] ubi0:animations is mounted. [2025-09-24 01:49:07.849] ubi2:textures is mounted. [2025-09-24 01:49:07.849] ubi1:dml_code is mounted. [2025-09-24 01:49:07.849] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:49:07.849] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:49:07.849] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:49:07.849] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:49:07.849] data.LB_FadeInType0=100 [2025-09-24 01:49:07.849] data.CHLH_FadeInType0=0 [2025-09-24 01:49:07.849] data.WU_FadeInDelay=0 [2025-09-24 01:49:07.849] max_time_out=0 [2025-09-24 01:49:07.849] No splash screen [2025-09-24 01:49:07.849] stop dss Done [2025-09-24 01:49:07.925] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:49:07.925] /dev/mem opened. [2025-09-24 01:49:07.925] Memory mapped at address 0xffffb9c12000. [2025-09-24 01:49:07.925] Read at address 0x00600018 (0xffffb9c12018): 0x00000000 [2025-09-24 01:49:07.925] Write at address 0x00600018 (0xffffb9c12018): 0x00400040, readback 0x00400040 [2025-09-24 01:49:07.925] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:49:08.069] Loaded PowerVR consumer services. [2025-09-24 01:49:08.165] Waiting data available... [2025-09-24 01:49:08.180] 512+0 records in [2025-09-24 01:49:08.180] 512+0 records out [2025-09-24 01:49:08.244] Starting syslogd/klogd: done [2025-09-24 01:49:08.260] DML Start [2025-09-24 01:49:08.421] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:49:08.645] DML res1: 0 [2025-09-24 01:49:09.098] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:49:09.098] Read Success [2025-09-24 01:49:09.098] Verifying certificate... [2025-09-24 01:49:09.354] Verified OK [2025-09-24 01:49:09.370] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:49:11.062] Verified OK [2025-09-24 01:49:11.062] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:49:11.670] Verified OK [2025-09-24 01:49:11.670] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:49:14.324] fs.protected_hardlinks = 1 [2025-09-24 01:49:14.340] fs.protected_symlinks = 1 [2025-09-24 01:49:14.340] kernel.modules_disabled = 1 [2025-09-24 01:49:14.532] [2025-09-24 01:49:14.532] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:49:15.759] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:49:23.548] SBL1:1210.0.1.0 [2025-09-24 01:49:23.596] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:49:25.163] SBL2:1210.0.1.0 [2025-09-24 01:49:25.194] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:49:25.306] j-A [2025-09-24 01:49:32.681] The R5 Autosar Classic is running [2025-09-24 01:49:32.681] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:49:32.681] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:49:33.288] INIT: version 2.96 booting [2025-09-24 01:49:33.401] INIT: Entering runlevel: 5 [2025-09-24 01:49:33.560] mtd32 attached [2025-09-24 01:49:33.560] mtd24 attached [2025-09-24 01:49:33.577] mtd28 attached [2025-09-24 01:49:33.625] RTNETLINK answers: File exists [2025-09-24 01:49:33.625] ubi0:dml_code is mounted. [2025-09-24 01:49:33.688] ubi1:textures is mounted. [2025-09-24 01:49:33.688] ubi2:animations is mounted. [2025-09-24 01:49:33.688] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:49:33.688] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:49:33.688] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:49:33.688] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:49:33.688] data.LB_FadeInType0=100 [2025-09-24 01:49:33.688] data.CHLH_FadeInType0=0 [2025-09-24 01:49:33.688] data.WU_FadeInDelay=0 [2025-09-24 01:49:33.688] max_time_out=0 [2025-09-24 01:49:33.688] No splash screen [2025-09-24 01:49:33.688] stop dss Done [2025-09-24 01:49:33.688] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:49:33.720] /dev/mem opened. [2025-09-24 01:49:33.746] Memory mapped at address 0xffffbcec0000. [2025-09-24 01:49:33.746] Read at address 0x00600018 (0xffffbcec0018): 0x00000000 [2025-09-24 01:49:33.746] Write at address 0x00600018 (0xffffbcec0018): 0x00400040, readback 0x00400040 [2025-09-24 01:49:33.762] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:49:33.778] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:49:33.970] Loaded PowerVR consumer services. [2025-09-24 01:49:34.002] 512+0 records in [2025-09-24 01:49:34.018] 512+0 records out [2025-09-24 01:49:34.034] Waiting data available... [2025-09-24 01:49:34.050] Starting syslogd/klogd: done [2025-09-24 01:49:34.066] DML Start [2025-09-24 01:49:34.258] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:49:34.513] DML res1: 0 [2025-09-24 01:49:34.923] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:49:34.923] Read Success [2025-09-24 01:49:34.923] Verifying certificate... [2025-09-24 01:49:35.227] Verified OK [2025-09-24 01:49:35.243] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:49:36.890] Verified OK [2025-09-24 01:49:36.906] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:49:37.530] Verified OK [2025-09-24 01:49:37.550] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:49:40.157] fs.protected_hardlinks = 1 [2025-09-24 01:49:40.173] fs.protected_symlinks = 1 [2025-09-24 01:49:40.173] kernel.modules_disabled = 1 [2025-09-24 01:49:40.397] [2025-09-24 01:49:40.397] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:49:41.560] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:49:49.399] SBL1:1210.0.1.0 [2025-09-24 01:49:49.447] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:49:51.014] SBL2:1210.0.1.0 [2025-09-24 01:49:51.061] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:49:51.157] j-A [2025-09-24 01:49:58.512] The R5 Autosar Classic is running [2025-09-24 01:49:58.512] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:49:58.534] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:49:59.140] INIT: version 2.96 booting [2025-09-24 01:49:59.253] INIT: Entering runlevel: 5 [2025-09-24 01:49:59.412] mtd28 attached [2025-09-24 01:49:59.412] mtd24 attached [2025-09-24 01:49:59.428] mtd32 attached [2025-09-24 01:49:59.460] ubi0:animations is mounted. [2025-09-24 01:49:59.550] RTNETLINK answers: File exists [2025-09-24 01:49:59.550] ubi1:textures is mounted. [2025-09-24 01:49:59.550] ubi2:dml_code is mounted. [2025-09-24 01:49:59.550] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:49:59.550] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:49:59.550] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:49:59.550] data.LB_FadeInType0=100 [2025-09-24 01:49:59.550] data.CHLH_FadeInType0=0 [2025-09-24 01:49:59.550] data.WU_FadeInDelay=0 [2025-09-24 01:49:59.550] max_time_out=0 [2025-09-24 01:49:59.550] No splash screen [2025-09-24 01:49:59.550] stop dss Done [2025-09-24 01:49:59.550] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:49:59.550] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:49:59.611] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:49:59.611] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:49:59.611] /dev/mem opened. [2025-09-24 01:49:59.611] Memory mapped at address 0xffff9c207000. [2025-09-24 01:49:59.611] Read at address 0x00600018 (0xffff9c207018): 0x00000000 [2025-09-24 01:49:59.611] Write at address 0x00600018 (0xffff9c207018): 0x00400040, readback 0x00400040 [2025-09-24 01:49:59.723] Loaded PowerVR consumer services. [2025-09-24 01:49:59.850] Waiting data available... [2025-09-24 01:49:59.866] 512+0 records in [2025-09-24 01:49:59.866] 512+0 records out [2025-09-24 01:49:59.898] Starting syslogd/klogd: done [2025-09-24 01:49:59.914] DML Start [2025-09-24 01:50:00.106] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:50:00.331] DML res1: 0 [2025-09-24 01:50:00.761] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:50:00.778] Read Success [2025-09-24 01:50:00.778] Verifying certificate... [2025-09-24 01:50:01.033] Verified OK [2025-09-24 01:50:01.049] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:50:02.681] Verified OK [2025-09-24 01:50:02.697] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:50:03.285] Verified OK [2025-09-24 01:50:03.285] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:50:05.988] fs.protected_hardlinks = 1 [2025-09-24 01:50:05.988] fs.protected_symlinks = 1 [2025-09-24 01:50:06.004] kernel.modules_disabled = 1 [2025-09-24 01:50:06.196] [2025-09-24 01:50:06.196] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:50:07.437] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:50:15.229] SBL1:1210.0.1.0 [2025-09-24 01:50:15.261] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:50:16.844] SBL2:1210.0.1.0 [2025-09-24 01:50:16.875] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:50:16.988] j-A [2025-09-24 01:50:24.359] The R5 Autosar Classic is running [2025-09-24 01:50:24.359] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:50:24.359] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:50:24.967] INIT: version 2.96 booting [2025-09-24 01:50:25.079] INIT: Entering runlevel: 5 [2025-09-24 01:50:25.223] mtd24 attached [2025-09-24 01:50:25.239] mtd28 attached [2025-09-24 01:50:25.255] mtd32 attached [2025-09-24 01:50:25.358] RTNETLINK answers: File exists [2025-09-24 01:50:25.358] ubi0:textures is mounted. [2025-09-24 01:50:25.358] ubi1:animations is mounted. [2025-09-24 01:50:25.358] ubi2:dml_code is mounted. [2025-09-24 01:50:25.358] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:50:25.358] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:50:25.358] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:50:25.358] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:50:25.358] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:50:25.358] data.LB_FadeInType0=100 [2025-09-24 01:50:25.358] data.CHLH_FadeInType0=0 [2025-09-24 01:50:25.358] data.WU_FadeInDelay=0 [2025-09-24 01:50:25.358] max_time_out=0 [2025-09-24 01:50:25.358] No splash screen [2025-09-24 01:50:25.358] stop dss Done [2025-09-24 01:50:25.390] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:50:25.426] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:50:25.426] /dev/mem opened. [2025-09-24 01:50:25.426] Memory mapped at address 0xffffb66b6000. [2025-09-24 01:50:25.426] Read at address 0x00600018 (0xffffb66b6018): 0x00000000 [2025-09-24 01:50:25.426] Write at address 0x00600018 (0xffffb66b6018): 0x00400040, readback 0x00400040 [2025-09-24 01:50:25.634] Loaded PowerVR consumer services. [2025-09-24 01:50:25.650] 512+0 records in [2025-09-24 01:50:25.650] 512+0 records out [2025-09-24 01:50:25.681] Waiting data available... [2025-09-24 01:50:25.713] Starting syslogd/klogd: done [2025-09-24 01:50:25.729] DML Start [2025-09-24 01:50:25.874] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:50:26.082] DML res1: 0 [2025-09-24 01:50:26.637] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:50:26.637] Read Success [2025-09-24 01:50:26.637] Verifying certificate... [2025-09-24 01:50:26.877] Verified OK [2025-09-24 01:50:26.909] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:50:28.630] Verified OK [2025-09-24 01:50:28.630] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:50:29.262] Verified OK [2025-09-24 01:50:29.262] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:50:31.869] fs.protected_hardlinks = 1 [2025-09-24 01:50:31.884] fs.protected_symlinks = 1 [2025-09-24 01:50:31.884] kernel.modules_disabled = 1 [2025-09-24 01:50:32.092] [2025-09-24 01:50:32.092] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:50:33.223] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:50:41.070] SBL1:1210.0.1.0 [2025-09-24 01:50:41.102] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:50:42.685] SBL2:1210.0.1.0 [2025-09-24 01:50:42.717] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:50:42.829] j-A [2025-09-24 01:50:50.199] The R5 Autosar Classic is running [2025-09-24 01:50:50.199] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:50:50.199] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:50:50.807] INIT: version 2.96 booting [2025-09-24 01:50:50.919] INIT: Entering runlevel: 5 [2025-09-24 01:50:51.079] mtd24 attached [2025-09-24 01:50:51.095] mtd28 attached [2025-09-24 01:50:51.111] mtd32 attached [2025-09-24 01:50:51.127] ubi0:textures is mounted. [2025-09-24 01:50:51.143] RTNETLINK answers: File exists [2025-09-24 01:50:51.192] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:50:51.192] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:50:51.192] ubi2:dml_code is mounted. [2025-09-24 01:50:51.192] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:50:51.192] ubi1:animations is mounted. [2025-09-24 01:50:51.192] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:50:51.192] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:50:51.192] data.LB_FadeInType0=100 [2025-09-24 01:50:51.192] data.CHLH_FadeInType0=0 [2025-09-24 01:50:51.213] data.WU_FadeInDelay=0 [2025-09-24 01:50:51.213] max_time_out=0 [2025-09-24 01:50:51.213] No splash screen [2025-09-24 01:50:51.213] stop dss Done [2025-09-24 01:50:51.245] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:50:51.285] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:50:51.285] /dev/mem opened. [2025-09-24 01:50:51.285] Memory mapped at address 0xffffb9b1f000. [2025-09-24 01:50:51.285] Read at address 0x00600018 (0xffffb9b1f018): 0x00000000 [2025-09-24 01:50:51.285] Write at address 0x00600018 (0xffffb9b1f018): 0x00400040, readback 0x00400040 [2025-09-24 01:50:51.477] Loaded PowerVR consumer services. [2025-09-24 01:50:51.508] 512+0 records in [2025-09-24 01:50:51.524] 512+0 records out [2025-09-24 01:50:51.540] Starting syslogd/klogd: Waiting data available... [2025-09-24 01:50:51.557] done [2025-09-24 01:50:51.573] DML Start [2025-09-24 01:50:51.764] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:50:51.988] DML res1: 0 [2025-09-24 01:50:52.431] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:50:52.431] Read Success [2025-09-24 01:50:52.431] Verifying certificate... [2025-09-24 01:50:52.671] Verified OK [2025-09-24 01:50:52.687] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:50:54.360] Verified OK [2025-09-24 01:50:54.360] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:50:54.996] Verified OK [2025-09-24 01:50:54.996] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:50:57.696] fs.protected_hardlinks = 1 [2025-09-24 01:50:57.696] fs.protected_symlinks = 1 [2025-09-24 01:50:57.696] kernel.modules_disabled = 1 [2025-09-24 01:50:57.888] [2025-09-24 01:50:57.888] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:50:59.084] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:51:01.429] SBL1:1210.0.1.0 [2025-09-24 01:51:06.929] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:51:08.512] SBL2:1210.0.1.0 [2025-09-24 01:51:08.544] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:51:08.656] j-A [2025-09-24 01:51:15.995] The R5 Autosar Classic is running [2025-09-24 01:51:16.026] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:51:16.026] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:51:16.633] INIT: version 2.96 booting [2025-09-24 01:51:16.745] INIT: Entering runlevel: 5 [2025-09-24 01:51:16.889] mtd24 attached [2025-09-24 01:51:16.905] mtd32 attached [2025-09-24 01:51:16.921] mtd28 attached [2025-09-24 01:51:16.969] RTNETLINK answers: File exists [2025-09-24 01:51:17.035] ubi1:dml_code is mounted. [2025-09-24 01:51:17.035] ubi0:textures is mounted. [2025-09-24 01:51:17.035] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:51:17.035] ubi2:animations is mounted. [2025-09-24 01:51:17.035] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:51:17.035] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:51:17.035] data.LB_FadeInType0=100 [2025-09-24 01:51:17.035] data.CHLH_FadeInType0=0 [2025-09-24 01:51:17.035] data.WU_FadeInDelay=0 [2025-09-24 01:51:17.035] max_time_out=0 [2025-09-24 01:51:17.035] No splash screen [2025-09-24 01:51:17.035] stop dss Done [2025-09-24 01:51:17.035] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:51:17.035] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:51:17.066] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:51:17.101] /dev/mem opened. [2025-09-24 01:51:17.101] Memory mapped at address 0xffffb044b000. [2025-09-24 01:51:17.101] Read at address 0x00600018 (0xffffb044b018): 0x00000000 [2025-09-24 01:51:17.101] Write at address 0x00600018 (0xffffb044b018): 0x00400040, readback 0x00400040 [2025-09-24 01:51:17.101] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:51:17.278] Loaded PowerVR consumer services. [2025-09-24 01:51:17.357] Waiting data available... [2025-09-24 01:51:17.373] 512+0 records in [2025-09-24 01:51:17.373] 512+0 records out [2025-09-24 01:51:17.421] Starting syslogd/klogd: done [2025-09-24 01:51:17.437] DML Start [2025-09-24 01:51:17.629] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:51:17.869] DML res1: 0 [2025-09-24 01:51:18.246] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:51:18.246] Read Success [2025-09-24 01:51:18.246] Verifying certificate... [2025-09-24 01:51:18.502] Verified OK [2025-09-24 01:51:18.518] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:51:20.325] Verified OK [2025-09-24 01:51:20.341] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:51:20.830] Verified OK [2025-09-24 01:51:20.830] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:51:23.260] fs.protected_hardlinks = 1 [2025-09-24 01:51:23.260] fs.protected_symlinks = 1 [2025-09-24 01:51:23.276] kernel.modules_disabled = 1 [2025-09-24 01:51:23.468] [2025-09-24 01:51:23.468] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:51:24.936] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:51:32.737] SBL1:1210.0.1.0 [2025-09-24 01:51:32.769] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:51:34.351] SBL2:1210.0.1.0 [2025-09-24 01:51:34.383] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:51:34.495] j-A [2025-09-24 01:51:41.868] The R5 Autosar Classic is running [2025-09-24 01:51:41.868] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:51:41.868] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:51:42.476] INIT: version 2.96 booting [2025-09-24 01:51:42.587] INIT: Entering runlevel: 5 [2025-09-24 01:51:42.731] mtd28 attached [2025-09-24 01:51:42.747] mtd24 attached [2025-09-24 01:51:42.763] mtd32 attached [2025-09-24 01:51:42.779] ubi0:animations is mounted. [2025-09-24 01:51:42.812] RTNETLINK answers: File exists [2025-09-24 01:51:42.867] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:51:42.867] ubi1:textures is mounted. [2025-09-24 01:51:42.867] ubi2:dml_code is mounted. [2025-09-24 01:51:42.867] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:51:42.867] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:51:42.867] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:51:42.867] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:51:42.867] data.LB_FadeInType0=100 [2025-09-24 01:51:42.867] data.CHLH_FadeInType0=0 [2025-09-24 01:51:42.867] data.WU_FadeInDelay=0 [2025-09-24 01:51:42.867] max_time_out=0 [2025-09-24 01:51:42.867] No splash screen [2025-09-24 01:51:42.867] stop dss Done [2025-09-24 01:51:42.930] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:51:42.930] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:51:42.930] /dev/mem opened. [2025-09-24 01:51:42.930] Memory mapped at address 0xffff94059000. [2025-09-24 01:51:42.930] Read at address 0x00600018 (0xffff94059018): 0x00000000 [2025-09-24 01:51:42.930] Write at address 0x00600018 (0xffff94059018): 0x00400040, readback 0x00400040 [2025-09-24 01:51:43.043] Loaded PowerVR consumer services. [2025-09-24 01:51:43.192] Waiting data available... [2025-09-24 01:51:43.192] 512+0 records in [2025-09-24 01:51:43.192] 512+0 records out [2025-09-24 01:51:43.223] Starting syslogd/klogd: done [2025-09-24 01:51:43.239] DML Start [2025-09-24 01:51:43.415] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:51:43.623] DML res1: 0 [2025-09-24 01:51:44.096] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:51:44.096] Read Success [2025-09-24 01:51:44.096] Verifying certificate... [2025-09-24 01:51:44.320] Verified OK [2025-09-24 01:51:44.336] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:51:46.012] Verified OK [2025-09-24 01:51:46.012] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:51:46.675] Verified OK [2025-09-24 01:51:46.675] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:51:49.201] fs.protected_hardlinks = 1 [2025-09-24 01:51:49.201] fs.protected_symlinks = 1 [2025-09-24 01:51:49.217] kernel.modules_disabled = 1 [2025-09-24 01:51:49.393] [2025-09-24 01:51:49.393] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:51:50.693] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:51:58.552] SBL1:1210.0.1.0 [2025-09-24 01:51:58.600] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:52:00.166] SBL2:1210.0.1.0 [2025-09-24 01:52:00.215] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:52:00.311] j-A [2025-09-24 01:52:07.667] The R5 Autosar Classic is running [2025-09-24 01:52:07.690] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:52:07.690] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:52:08.297] INIT: version 2.96 booting [2025-09-24 01:52:08.409] INIT: Entering runlevel: 5 [2025-09-24 01:52:08.569] mtd32 attached [2025-09-24 01:52:08.569] mtd24 attached [2025-09-24 01:52:08.585] mtd28 attached [2025-09-24 01:52:08.633] ubi0:dml_code is mounted. [2025-09-24 01:52:08.633] RTNETLINK answers: File exists [2025-09-24 01:52:08.692] ubi1:textures is mounted. [2025-09-24 01:52:08.692] ubi2:animations is mounted. [2025-09-24 01:52:08.692] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:52:08.692] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:52:08.692] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:52:08.692] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:52:08.692] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:52:08.692] data.LB_FadeInType0=100 [2025-09-24 01:52:08.692] data.CHLH_FadeInType0=0 [2025-09-24 01:52:08.692] data.WU_FadeInDelay=0 [2025-09-24 01:52:08.692] max_time_out=0 [2025-09-24 01:52:08.692] No splash screen [2025-09-24 01:52:08.692] stop dss Done [2025-09-24 01:52:08.784] /dev/mem opened. [2025-09-24 01:52:08.784] Memory mapped at address 0xffffbeae2000. [2025-09-24 01:52:08.784] Read at address 0x00600018 (0xffffbeae2018): 0x00000000 [2025-09-24 01:52:08.784] Write at address 0x00600018 (0xffffbeae2018): 0x00400040, readback 0x00400040 [2025-09-24 01:52:08.784] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:52:08.784] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:52:08.992] Loaded PowerVR consumer services. [2025-09-24 01:52:09.008] 512+0 records in [2025-09-24 01:52:09.008] 512+0 records out [2025-09-24 01:52:09.056] Starting syslogd/klogd: Waiting data available... [2025-09-24 01:52:09.072] done [2025-09-24 01:52:09.072] DML Start [2025-09-24 01:52:09.248] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:52:09.488] DML res1: 0 [2025-09-24 01:52:09.913] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:52:09.913] Read Success [2025-09-24 01:52:09.913] Verifying certificate... [2025-09-24 01:52:10.153] Verified OK [2025-09-24 01:52:10.169] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:52:11.873] Verified OK [2025-09-24 01:52:11.873] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:52:12.480] Verified OK [2025-09-24 01:52:12.480] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:52:15.038] fs.protected_hardlinks = 1 [2025-09-24 01:52:15.038] fs.protected_symlinks = 1 [2025-09-24 01:52:15.054] kernel.modules_disabled = 1 [2025-09-24 01:52:15.245] [2025-09-24 01:52:15.245] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:52:16.572] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:52:24.393] SBL1:1210.0.1.0 [2025-09-24 01:52:24.424] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:52:26.007] SBL2:1210.0.1.0 [2025-09-24 01:52:26.039] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:52:26.151] j-A [2025-09-24 01:52:33.523] The R5 Autosar Classic is running [2025-09-24 01:52:33.523] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:52:33.523] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:52:34.131] INIT: version 2.96 booting [2025-09-24 01:52:34.243] INIT: Entering runlevel: 5 [2025-09-24 01:52:34.402] mtd32 attached [2025-09-24 01:52:34.418] mtd24 attached [2025-09-24 01:52:34.418] mtd28 attached [2025-09-24 01:52:34.467] ubi0:dml_code is mounted. [2025-09-24 01:52:34.467] RTNETLINK answers: File exists [2025-09-24 01:52:34.482] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:52:34.482] ubi2:animations is mounted. [2025-09-24 01:52:34.514] ubi1:textures is mounted. [2025-09-24 01:52:34.514] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:52:34.514] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:52:34.514] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:52:34.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:52:34.538] data.LB_FadeInType0=100 [2025-09-24 01:52:34.538] data.CHLH_FadeInType0=0 [2025-09-24 01:52:34.538] data.WU_FadeInDelay=0 [2025-09-24 01:52:34.538] max_time_out=0 [2025-09-24 01:52:34.538] No splash screen [2025-09-24 01:52:34.538] stop dss Done [2025-09-24 01:52:34.568] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:52:34.568] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:52:34.584] /dev/mem opened. [2025-09-24 01:52:34.610] Memory mapped at address 0xffff8385e000. [2025-09-24 01:52:34.610] Read at address 0x00600018 (0xffff8385e018): 0x00000000 [2025-09-24 01:52:34.610] Write at address 0x00600018 (0xffff8385e018): 0x00400040, readback 0x00400040 [2025-09-24 01:52:34.817] Loaded PowerVR consumer services. [2025-09-24 01:52:34.857] 512+0 records in [2025-09-24 01:52:34.857] 512+0 records out [2025-09-24 01:52:34.857] Waiting data available... [2025-09-24 01:52:34.889] Starting syslogd/klogd: done [2025-09-24 01:52:34.906] DML Start [2025-09-24 01:52:35.065] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:52:35.289] DML res1: 0 [2025-09-24 01:52:35.736] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:52:35.752] Read Success [2025-09-24 01:52:35.752] Verifying certificate... [2025-09-24 01:52:35.976] Verified OK [2025-09-24 01:52:35.992] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:52:37.699] Verified OK [2025-09-24 01:52:37.699] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:52:38.364] Verified OK [2025-09-24 01:52:38.364] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:52:40.968] fs.protected_hardlinks = 1 [2025-09-24 01:52:40.968] fs.protected_symlinks = 1 [2025-09-24 01:52:40.968] kernel.modules_disabled = 1 [2025-09-24 01:52:41.161] [2025-09-24 01:52:41.161] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:52:42.380] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:52:50.221] SBL1:1210.0.1.0 [2025-09-24 01:52:50.269] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:52:51.837] SBL2:1210.0.1.0 [2025-09-24 01:52:51.884] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:52:51.980] j-A [2025-09-24 01:52:59.336] The R5 Autosar Classic is running [2025-09-24 01:52:59.336] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:52:59.357] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:52:59.965] INIT: version 2.96 booting [2025-09-24 01:53:00.077] INIT: Entering runlevel: 5 [2025-09-24 01:53:00.237] mtd28 attached [2025-09-24 01:53:00.253] mtd32 attached [2025-09-24 01:53:00.253] mtd24 attached [2025-09-24 01:53:00.301] ubi0:animations is mounted. [2025-09-24 01:53:00.372] RTNETLINK answers: File exists [2025-09-24 01:53:00.372] ubi2:textures is mounted. [2025-09-24 01:53:00.372] ubi1:dml_code is mounted. [2025-09-24 01:53:00.372] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:53:00.372] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:53:00.372] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:53:00.372] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:53:00.372] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:53:00.372] data.LB_FadeInType0=100 [2025-09-24 01:53:00.372] data.CHLH_FadeInType0=0 [2025-09-24 01:53:00.372] data.WU_FadeInDelay=0 [2025-09-24 01:53:00.372] max_time_out=0 [2025-09-24 01:53:00.372] No splash screen [2025-09-24 01:53:00.372] stop dss Done [2025-09-24 01:53:00.447] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:53:00.447] /dev/mem opened. [2025-09-24 01:53:00.447] Memory mapped at address 0xffff9cbfe000. [2025-09-24 01:53:00.447] Read at address 0x00600018 (0xffff9cbfe018): 0x00000000 [2025-09-24 01:53:00.447] Write at address 0x00600018 (0xffff9cbfe018): 0x00400040, readback 0x00400040 [2025-09-24 01:53:00.447] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:53:00.526] Loaded PowerVR consumer services. [2025-09-24 01:53:00.655] 512+0 records in [2025-09-24 01:53:00.655] 512+0 records out [2025-09-24 01:53:00.687] Waiting data available... [2025-09-24 01:53:00.718] Starting syslogd/klogd: done [2025-09-24 01:53:00.734] DML Start [2025-09-24 01:53:00.943] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:53:01.167] DML res1: 0 [2025-09-24 01:53:01.608] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:53:01.608] Read Success [2025-09-24 01:53:01.608] Verifying certificate... [2025-09-24 01:53:01.831] Verified OK [2025-09-24 01:53:01.847] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:53:03.602] Verified OK [2025-09-24 01:53:03.602] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:53:04.255] Verified OK [2025-09-24 01:53:04.255] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:53:06.845] fs.protected_hardlinks = 1 [2025-09-24 01:53:06.845] fs.protected_symlinks = 1 [2025-09-24 01:53:06.861] kernel.modules_disabled = 1 [2025-09-24 01:53:07.052] [2025-09-24 01:53:07.052] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:53:08.246] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:53:16.078] SBL1:1210.0.1.0 [2025-09-24 01:53:16.110] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:53:17.693] SBL2:1210.0.1.0 [2025-09-24 01:53:17.725] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:53:17.837] j-A [2025-09-24 01:53:25.177] The R5 Autosar Classic is running [2025-09-24 01:53:25.208] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:53:25.208] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:53:25.815] INIT: version 2.96 booting [2025-09-24 01:53:25.911] INIT: Entering runlevel: 5 [2025-09-24 01:53:26.071] mtd32 attached [2025-09-24 01:53:26.087] mtd24 attached [2025-09-24 01:53:26.103] mtd28 attached [2025-09-24 01:53:26.135] ubi0:dml_code is mounted. [2025-09-24 01:53:26.151] RTNETLINK answers: File exists [2025-09-24 01:53:26.151] ubi2:animations is mounted. [2025-09-24 01:53:26.196] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:53:26.196] ubi1:textures is mounted. [2025-09-24 01:53:26.196] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:53:26.196] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:53:26.196] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:53:26.196] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:53:26.196] data.LB_FadeInType0=100 [2025-09-24 01:53:26.196] data.CHLH_FadeInType0=0 [2025-09-24 01:53:26.196] data.WU_FadeInDelay=0 [2025-09-24 01:53:26.196] max_time_out=0 [2025-09-24 01:53:26.196] No splash screen [2025-09-24 01:53:26.196] stop dss Done [2025-09-24 01:53:26.244] /dev/mem opened. [2025-09-24 01:53:26.244] Memory mapped at address 0xffff8b21d000. [2025-09-24 01:53:26.276] Read at address 0x00600018 (0xffff8b21d018): 0x00000000 [2025-09-24 01:53:26.276] Write at address 0x00600018 (0xffff8b21d018): 0x00400040, readback 0x00400040 [2025-09-24 01:53:26.276] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:53:26.276] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:53:26.468] Loaded PowerVR consumer services. [2025-09-24 01:53:26.500] 512+0 records in [2025-09-24 01:53:26.516] 512+0 records out [2025-09-24 01:53:26.548] Waiting data available... [2025-09-24 01:53:26.548] Starting syslogd/klogd: done [2025-09-24 01:53:26.564] DML Start [2025-09-24 01:53:26.739] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:53:26.949] DML res1: 0 [2025-09-24 01:53:27.426] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:53:27.426] Read Success [2025-09-24 01:53:27.426] Verifying certificate... [2025-09-24 01:53:27.682] Verified OK [2025-09-24 01:53:27.682] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:53:29.484] Verified OK [2025-09-24 01:53:29.484] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:53:30.036] Verified OK [2025-09-24 01:53:30.036] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:53:32.449] fs.protected_hardlinks = 1 [2025-09-24 01:53:32.449] fs.protected_symlinks = 1 [2025-09-24 01:53:32.465] kernel.modules_disabled = 1 [2025-09-24 01:53:32.657] [2025-09-24 01:53:32.657] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:53:34.064] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:53:41.888] SBL1:1210.0.1.0 [2025-09-24 01:53:41.936] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:53:43.504] SBL2:1210.0.1.0 [2025-09-24 01:53:43.536] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:53:43.647] j-A [2025-09-24 01:53:51.024] The R5 Autosar Classic is running [2025-09-24 01:53:51.024] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:53:51.024] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:53:51.631] INIT: version 2.96 booting [2025-09-24 01:53:51.744] INIT: Entering runlevel: 5 [2025-09-24 01:53:51.887] mtd24 attached [2025-09-24 01:53:51.903] mtd28 attached [2025-09-24 01:53:51.919] mtd32 attached [2025-09-24 01:53:51.967] RTNETLINK answers: File exists [2025-09-24 01:53:52.032] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:53:52.032] ubi1:animations is mounted. [2025-09-24 01:53:52.032] ubi0:textures is mounted. [2025-09-24 01:53:52.032] ubi2:dml_code is mounted. [2025-09-24 01:53:52.032] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:53:52.032] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:53:52.032] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:53:52.032] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:53:52.032] data.LB_FadeInType0=100 [2025-09-24 01:53:52.032] data.CHLH_FadeInType0=0 [2025-09-24 01:53:52.032] data.WU_FadeInDelay=0 [2025-09-24 01:53:52.032] max_time_out=0 [2025-09-24 01:53:52.032] No splash screen [2025-09-24 01:53:52.032] stop dss Done [2025-09-24 01:53:52.080] /dev/mem opened. [2025-09-24 01:53:52.122] Memory mapped at address 0xffff8d963000. [2025-09-24 01:53:52.122] Read at address 0x00600018 (0xffff8d963018): 0x00000000 [2025-09-24 01:53:52.122] Write at address 0x00600018 (0xffff8d963018): 0x00400040, readback 0x00400040 [2025-09-24 01:53:52.122] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:53:52.122] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:53:52.235] Loaded PowerVR consumer services. [2025-09-24 01:53:52.359] Waiting data available... [2025-09-24 01:53:52.359] 512+0 records in [2025-09-24 01:53:52.359] 512+0 records out [2025-09-24 01:53:52.407] Starting syslogd/klogd: done [2025-09-24 01:53:52.423] DML Start [2025-09-24 01:53:52.583] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:53:52.774] DML res1: 0 [2025-09-24 01:53:53.270] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:53:53.286] Read Success [2025-09-24 01:53:53.286] Verifying certificate... [2025-09-24 01:53:53.574] Verified OK [2025-09-24 01:53:53.591] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:53:55.179] Verified OK [2025-09-24 01:53:55.179] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:53:55.753] Verified OK [2025-09-24 01:53:55.753] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:53:58.423] fs.protected_hardlinks = 1 [2025-09-24 01:53:58.423] fs.protected_symlinks = 1 [2025-09-24 01:53:58.439] kernel.modules_disabled = 1 [2025-09-24 01:53:58.630] [2025-09-24 01:53:58.630] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:53:59.903] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:54:07.708] SBL1:1210.0.1.0 [2025-09-24 01:54:07.740] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:54:09.323] SBL2:1210.0.1.0 [2025-09-24 01:54:09.355] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:54:09.467] j-A [2025-09-24 01:54:16.806] The R5 Autosar Classic is running [2025-09-24 01:54:16.837] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:54:16.837] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:54:17.444] INIT: version 2.96 booting [2025-09-24 01:54:17.556] INIT: Entering runlevel: 5 [2025-09-24 01:54:17.700] mtd24 attached [2025-09-24 01:54:17.716] mtd32 attached [2025-09-24 01:54:17.732] mtd28 attached [2025-09-24 01:54:17.764] ubi0:textures is mounted. [2025-09-24 01:54:17.834] RTNETLINK answers: File exists [2025-09-24 01:54:17.834] ubi2:animations is mounted. [2025-09-24 01:54:17.834] ubi1:dml_code is mounted. [2025-09-24 01:54:17.834] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:54:17.834] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:54:17.834] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:54:17.834] data.LB_FadeInType0=100 [2025-09-24 01:54:17.834] data.CHLH_FadeInType0=0 [2025-09-24 01:54:17.834] data.WU_FadeInDelay=0 [2025-09-24 01:54:17.834] max_time_out=0 [2025-09-24 01:54:17.834] No splash screen [2025-09-24 01:54:17.834] stop dss Done [2025-09-24 01:54:17.834] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:54:17.834] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:54:17.865] /dev/mem opened. [2025-09-24 01:54:17.865] Memory mapped at address 0xffff90468000. [2025-09-24 01:54:17.891] Read at address 0x00600018 (0xffff90468018): 0x00000000 [2025-09-24 01:54:17.891] Write at address 0x00600018 (0xffff90468018): 0x00400040, readback 0x00400040 [2025-09-24 01:54:17.923] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:54:17.940] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:54:18.116] Loaded PowerVR consumer services. [2025-09-24 01:54:18.178] 512+0 records in [2025-09-24 01:54:18.178] 512+0 records out [2025-09-24 01:54:18.178] Waiting data available... [2025-09-24 01:54:18.178] Starting syslogd/klogd: done [2025-09-24 01:54:18.194] DML Start [2025-09-24 01:54:18.369] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:54:18.561] DML res1: 0 [2025-09-24 01:54:19.042] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:54:19.063] Read Success [2025-09-24 01:54:19.063] Verifying certificate... [2025-09-24 01:54:19.318] Verified OK [2025-09-24 01:54:19.334] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:54:20.986] Verified OK [2025-09-24 01:54:20.986] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:54:21.601] Verified OK [2025-09-24 01:54:21.601] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:54:24.320] fs.protected_hardlinks = 1 [2025-09-24 01:54:24.320] fs.protected_symlinks = 1 [2025-09-24 01:54:24.335] kernel.modules_disabled = 1 [2025-09-24 01:54:24.528] [2025-09-24 01:54:24.528] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:54:25.689] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:54:33.528] SBL1:1210.0.1.0 [2025-09-24 01:54:33.576] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:54:35.142] SBL2:1210.0.1.0 [2025-09-24 01:54:35.190] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:54:35.286] j-A [2025-09-24 01:54:42.640] The R5 Autosar Classic is running [2025-09-24 01:54:42.665] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:54:42.665] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:54:43.272] INIT: version 2.96 booting [2025-09-24 01:54:43.384] INIT: Entering runlevel: 5 [2025-09-24 01:54:43.528] mtd24 attached [2025-09-24 01:54:43.544] mtd28 attached [2025-09-24 01:54:43.560] mtd32 attached [2025-09-24 01:54:43.593] ubi0:textures is mounted. [2025-09-24 01:54:43.609] ubi1:animations is mounted. [2025-09-24 01:54:43.609] ubi2:dml_code is mounted. [2025-09-24 01:54:43.624] RTNETLINK answers: File exists [2025-09-24 01:54:43.677] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:54:43.677] data.LB_FadeInType0=100 [2025-09-24 01:54:43.677] data.CHLH_FadeInType0=0 [2025-09-24 01:54:43.677] data.WU_FadeInDelay=0 [2025-09-24 01:54:43.677] max_time_out=0 [2025-09-24 01:54:43.677] No splash screen [2025-09-24 01:54:43.677] stop dss Done [2025-09-24 01:54:43.677] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:54:43.677] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:54:43.677] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:54:43.677] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:54:43.727] /dev/mem opened. [2025-09-24 01:54:43.727] Memory mapped at address 0xffff8ffe6000. [2025-09-24 01:54:43.727] Read at address 0x00600018 (0xffff8ffe6018): 0x00000000 [2025-09-24 01:54:43.727] Write at address 0x00600018 (0xffff8ffe6018): 0x00400040, readback 0x00400040 [2025-09-24 01:54:43.767] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:54:43.767] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:54:43.847] Loaded PowerVR consumer services. [2025-09-24 01:54:43.975] 512+0 records in [2025-09-24 01:54:43.991] 512+0 records out [2025-09-24 01:54:43.991] Waiting data available... [2025-09-24 01:54:44.023] Starting syslogd/klogd: done [2025-09-24 01:54:44.039] DML Start [2025-09-24 01:54:44.231] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:54:44.487] DML res1: 0 [2025-09-24 01:54:44.903] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:54:44.923] Read Success [2025-09-24 01:54:44.923] Verifying certificate... [2025-09-24 01:54:45.211] Verified OK [2025-09-24 01:54:45.243] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:54:46.950] Verified OK [2025-09-24 01:54:46.950] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:54:47.557] Verified OK [2025-09-24 01:54:47.557] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:54:50.115] fs.protected_hardlinks = 1 [2025-09-24 01:54:50.115] fs.protected_symlinks = 1 [2025-09-24 01:54:50.131] kernel.modules_disabled = 1 [2025-09-24 01:54:50.323] [2025-09-24 01:54:50.323] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:54:51.522] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:54:59.347] SBL1:1210.0.1.0 [2025-09-24 01:54:59.395] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:55:00.962] SBL2:1210.0.1.0 [2025-09-24 01:55:00.994] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:55:01.106] j-A [2025-09-24 01:55:08.479] The R5 Autosar Classic is running [2025-09-24 01:55:08.479] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:55:08.479] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:55:09.086] INIT: version 2.96 booting [2025-09-24 01:55:09.198] INIT: Entering runlevel: 5 [2025-09-24 01:55:09.358] mtd32 attached [2025-09-24 01:55:09.358] mtd28 attached [2025-09-24 01:55:09.374] mtd24 attached [2025-09-24 01:55:09.422] RTNETLINK answers: File exists [2025-09-24 01:55:09.422] ubi0:dml_code is mounted. [2025-09-24 01:55:09.485] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:55:09.485] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:55:09.485] ubi2:textures is mounted. [2025-09-24 01:55:09.485] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:55:09.485] ubi1:animations is mounted. [2025-09-24 01:55:09.485] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:55:09.485] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:55:09.485] data.LB_FadeInType0=100 [2025-09-24 01:55:09.485] data.CHLH_FadeInType0=0 [2025-09-24 01:55:09.485] data.WU_FadeInDelay=0 [2025-09-24 01:55:09.485] max_time_out=0 [2025-09-24 01:55:09.485] No splash screen [2025-09-24 01:55:09.485] stop dss Done [2025-09-24 01:55:09.517] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:55:09.533] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:55:09.569] /dev/mem opened. [2025-09-24 01:55:09.569] Memory mapped at address 0xffff990e8000. [2025-09-24 01:55:09.569] Read at address 0x00600018 (0xffff990e8018): 0x00000000 [2025-09-24 01:55:09.569] Write at address 0x00600018 (0xffff990e8018): 0x00400040, readback 0x00400040 [2025-09-24 01:55:09.633] Loaded PowerVR consumer services. [2025-09-24 01:55:09.793] 512+0 records in [2025-09-24 01:55:09.793] 512+0 records out [2025-09-24 01:55:09.809] Waiting data available... [2025-09-24 01:55:09.841] Starting syslogd/klogd: done [2025-09-24 01:55:09.857] DML Start [2025-09-24 01:55:10.049] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:55:10.305] DML res1: 0 [2025-09-24 01:55:10.679] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:55:10.679] Read Success [2025-09-24 01:55:10.679] Verifying certificate... [2025-09-24 01:55:10.934] Verified OK [2025-09-24 01:55:10.950] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:55:12.565] Verified OK [2025-09-24 01:55:12.565] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:55:13.149] Verified OK [2025-09-24 01:55:13.149] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:55:15.900] fs.protected_hardlinks = 1 [2025-09-24 01:55:15.916] fs.protected_symlinks = 1 [2025-09-24 01:55:15.916] kernel.modules_disabled = 1 [2025-09-24 01:55:16.108] [2025-09-24 01:55:16.108] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:55:17.359] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:55:25.183] SBL1:1210.0.1.0 [2025-09-24 01:55:25.215] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:55:26.798] SBL2:1210.0.1.0 [2025-09-24 01:55:26.830] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:55:26.942] j-A [2025-09-24 01:55:34.312] The R5 Autosar Classic is running [2025-09-24 01:55:34.312] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:55:34.312] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:55:34.920] INIT: version 2.96 booting [2025-09-24 01:55:35.031] INIT: Entering runlevel: 5 [2025-09-24 01:55:35.192] mtd24 attached [2025-09-24 01:55:35.192] mtd28 attached [2025-09-24 01:55:35.239] ubi0:textures is mounted. [2025-09-24 01:55:35.239] ubi1:animations is mounted. [2025-09-24 01:55:35.255] mtd32 attached [2025-09-24 01:55:35.301] RTNETLINK answers: File exists [2025-09-24 01:55:35.301] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:55:35.301] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:55:35.301] ubi2:dml_code is mounted. [2025-09-24 01:55:35.301] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:55:35.301] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:55:35.301] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:55:35.328] data.LB_FadeInType0=100 [2025-09-24 01:55:35.328] data.CHLH_FadeInType0=0 [2025-09-24 01:55:35.328] data.WU_FadeInDelay=0 [2025-09-24 01:55:35.328] max_time_out=0 [2025-09-24 01:55:35.328] No splash screen [2025-09-24 01:55:35.328] stop dss Done [2025-09-24 01:55:35.409] /dev/mem opened. [2025-09-24 01:55:35.409] Memory mapped at address 0xffffb86f6000. [2025-09-24 01:55:35.409] Read at address 0x00600018 (0xffffb86f6018): 0x00000000 [2025-09-24 01:55:35.409] Write at address 0x00600018 (0xffffb86f6018): 0x00400040, readback 0x00400040 [2025-09-24 01:55:35.425] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:55:35.425] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:55:35.536] Loaded PowerVR consumer services. [2025-09-24 01:55:35.671] Waiting data available... [2025-09-24 01:55:35.671] 512+0 records in [2025-09-24 01:55:35.671] 512+0 records out [2025-09-24 01:55:35.702] Starting syslogd/klogd: done [2025-09-24 01:55:35.718] DML Start [2025-09-24 01:55:35.894] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:55:36.118] DML res1: 0 [2025-09-24 01:55:36.645] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:55:36.645] Read Success [2025-09-24 01:55:36.645] Verifying certificate... [2025-09-24 01:55:36.932] Verified OK [2025-09-24 01:55:36.949] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:55:38.588] Verified OK [2025-09-24 01:55:38.588] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:55:39.204] Verified OK [2025-09-24 01:55:39.204] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:55:41.907] fs.protected_hardlinks = 1 [2025-09-24 01:55:41.907] fs.protected_symlinks = 1 [2025-09-24 01:55:41.923] kernel.modules_disabled = 1 [2025-09-24 01:55:42.099] [2025-09-24 01:55:42.099] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:55:43.212] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:55:50.990] SBL1:1210.0.1.0 [2025-09-24 01:55:51.038] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:55:52.605] SBL2:1210.0.1.0 [2025-09-24 01:55:52.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:55:52.748] j-A [2025-09-24 01:56:00.103] The R5 Autosar Classic is running [2025-09-24 01:56:00.128] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:56:00.128] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:56:00.736] INIT: version 2.96 booting [2025-09-24 01:56:00.848] INIT: Entering runlevel: 5 [2025-09-24 01:56:01.008] mtd32 attached [2025-09-24 01:56:01.008] mtd28 attached [2025-09-24 01:56:01.024] mtd24 attached [2025-09-24 01:56:01.072] RTNETLINK answers: File exists [2025-09-24 01:56:01.117] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:56:01.117] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:56:01.117] ubi0:dml_code is mounted. [2025-09-24 01:56:01.117] ubi2:textures is mounted. [2025-09-24 01:56:01.117] ubi1:animations is mounted. [2025-09-24 01:56:01.117] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:56:01.117] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:56:01.117] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:56:01.140] data.LB_FadeInType0=100 [2025-09-24 01:56:01.140] data.CHLH_FadeInType0=0 [2025-09-24 01:56:01.140] data.WU_FadeInDelay=0 [2025-09-24 01:56:01.140] max_time_out=0 [2025-09-24 01:56:01.140] No splash screen [2025-09-24 01:56:01.140] stop dss Done [2025-09-24 01:56:01.168] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:56:01.168] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:56:01.183] /dev/mem opened. [2025-09-24 01:56:01.210] Memory mapped at address 0xffffae373000. [2025-09-24 01:56:01.210] Read at address 0x00600018 (0xffffae373018): 0x00000000 [2025-09-24 01:56:01.210] Write at address 0x00600018 (0xffffae373018): 0x00400040, readback 0x00400040 [2025-09-24 01:56:01.290] Loaded PowerVR consumer services. [2025-09-24 01:56:01.449] Waiting data available... [2025-09-24 01:56:01.449] 512+0 records in [2025-09-24 01:56:01.449] 512+0 records out [2025-09-24 01:56:01.465] Starting syslogd/klogd: done [2025-09-24 01:56:01.481] DML Start [2025-09-24 01:56:01.673] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:56:01.913] DML res1: 0 [2025-09-24 01:56:02.336] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:56:02.336] Read Success [2025-09-24 01:56:02.336] Verifying certificate... [2025-09-24 01:56:02.592] Verified OK [2025-09-24 01:56:02.592] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:56:04.139] Verified OK [2025-09-24 01:56:04.139] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:56:04.747] Verified OK [2025-09-24 01:56:04.763] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:56:07.513] fs.protected_hardlinks = 1 [2025-09-24 01:56:07.529] fs.protected_symlinks = 1 [2025-09-24 01:56:07.529] kernel.modules_disabled = 1 [2025-09-24 01:56:07.737] [2025-09-24 01:56:07.737] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:56:09.004] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:56:16.804] SBL1:1210.0.1.0 [2025-09-24 01:56:16.852] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:56:18.419] SBL2:1210.0.1.0 [2025-09-24 01:56:18.467] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:56:18.562] j-A [2025-09-24 01:56:25.919] The R5 Autosar Classic is running [2025-09-24 01:56:25.941] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:56:25.941] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:56:26.548] INIT: version 2.96 booting [2025-09-24 01:56:26.659] INIT: Entering runlevel: 5 [2025-09-24 01:56:26.820] mtd28 attached [2025-09-24 01:56:26.835] mtd32 attached [2025-09-24 01:56:26.835] mtd24 attached [2025-09-24 01:56:26.933] RTNETLINK answers: File exists [2025-09-24 01:56:26.933] ubi0:animations is mounted. [2025-09-24 01:56:26.933] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:56:26.933] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:56:26.933] ubi1:dml_code is mounted. [2025-09-24 01:56:26.933] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:56:26.933] ubi2:textures is mounted. [2025-09-24 01:56:26.933] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:56:26.933] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:56:26.956] data.LB_FadeInType0=100 [2025-09-24 01:56:26.956] data.CHLH_FadeInType0=0 [2025-09-24 01:56:26.956] data.WU_FadeInDelay=0 [2025-09-24 01:56:26.956] max_time_out=0 [2025-09-24 01:56:26.956] No splash screen [2025-09-24 01:56:26.956] stop dss Done [2025-09-24 01:56:26.989] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:56:27.033] /dev/mem opened. [2025-09-24 01:56:27.033] Memory mapped at address 0xffff9e0d8000. [2025-09-24 01:56:27.033] Read at address 0x00600018 (0xffff9e0d8018): 0x00000000 [2025-09-24 01:56:27.033] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:56:27.033] Write at address 0x00600018 (0xffff9e0d8018): 0x00400040, readback 0x00400040 [2025-09-24 01:56:27.257] Loaded PowerVR consumer services. [2025-09-24 01:56:27.289] Waiting data available... [2025-09-24 01:56:27.289] 512+0 records in [2025-09-24 01:56:27.289] 512+0 records out [2025-09-24 01:56:27.337] Starting syslogd/klogd: done [2025-09-24 01:56:27.353] DML Start [2025-09-24 01:56:27.512] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:56:27.736] DML res1: 0 [2025-09-24 01:56:28.245] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:56:28.245] Read Success [2025-09-24 01:56:28.245] Verifying certificate... [2025-09-24 01:56:28.454] Verified OK [2025-09-24 01:56:28.470] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:56:30.210] Verified OK [2025-09-24 01:56:30.210] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:56:30.734] Verified OK [2025-09-24 01:56:30.734] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:56:33.180] fs.protected_hardlinks = 1 [2025-09-24 01:56:33.180] fs.protected_symlinks = 1 [2025-09-24 01:56:33.180] kernel.modules_disabled = 1 [2025-09-24 01:56:33.372] [2025-09-24 01:56:33.372] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:56:34.852] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:56:42.643] SBL1:1210.0.1.0 [2025-09-24 01:56:42.675] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:56:44.258] SBL2:1210.0.1.0 [2025-09-24 01:56:44.290] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:56:44.402] j-A [2025-09-24 01:56:51.776] The R5 Autosar Classic is running [2025-09-24 01:56:51.776] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:56:51.776] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:56:52.382] INIT: version 2.96 booting [2025-09-24 01:56:52.495] INIT: Entering runlevel: 5 [2025-09-24 01:56:52.639] mtd24 attached [2025-09-24 01:56:52.654] mtd28 attached [2025-09-24 01:56:52.686] ubi0:textures is mounted. [2025-09-24 01:56:52.702] ubi1:animations is mounted. [2025-09-24 01:56:52.702] mtd32 attached [2025-09-24 01:56:52.718] RTNETLINK answers: File exists [2025-09-24 01:56:52.762] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:56:52.762] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:56:52.762] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:56:52.762] ubi2:dml_code is mounted. [2025-09-24 01:56:52.762] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:56:52.762] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:56:52.786] data.LB_FadeInType0=100 [2025-09-24 01:56:52.786] data.CHLH_FadeInType0=0 [2025-09-24 01:56:52.786] data.WU_FadeInDelay=0 [2025-09-24 01:56:52.786] max_time_out=0 [2025-09-24 01:56:52.786] No splash screen [2025-09-24 01:56:52.786] stop dss Done [2025-09-24 01:56:52.864] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:56:52.864] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:56:52.864] /dev/mem opened. [2025-09-24 01:56:52.864] Memory mapped at address 0xffff9bb5c000. [2025-09-24 01:56:52.864] Read at address 0x00600018 (0xffff9bb5c018): 0x00000000 [2025-09-24 01:56:52.864] Write at address 0x00600018 (0xffff9bb5c018): 0x00400040, readback 0x00400040 [2025-09-24 01:56:52.944] Loaded PowerVR consumer services. [2025-09-24 01:56:53.088] Waiting data available... [2025-09-24 01:56:53.104] 512+0 records in [2025-09-24 01:56:53.104] 512+0 records out [2025-09-24 01:56:53.120] Starting syslogd/klogd: done [2025-09-24 01:56:53.136] DML Start [2025-09-24 01:56:53.280] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:56:53.455] DML res1: 0 [2025-09-24 01:56:54.027] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:56:54.027] Read Success [2025-09-24 01:56:54.027] Verifying certificate... [2025-09-24 01:56:54.267] Verified OK [2025-09-24 01:56:54.267] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:56:55.894] Verified OK [2025-09-24 01:56:55.894] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:56:56.515] Verified OK [2025-09-24 01:56:56.515] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:56:59.041] fs.protected_hardlinks = 1 [2025-09-24 01:56:59.058] fs.protected_symlinks = 1 [2025-09-24 01:56:59.058] kernel.modules_disabled = 1 [2025-09-24 01:56:59.249] [2025-09-24 01:56:59.249] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:57:00.620] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:57:08.446] SBL1:1210.0.1.0 [2025-09-24 01:57:08.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:57:10.061] SBL2:1210.0.1.0 [2025-09-24 01:57:10.094] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:57:10.205] j-A [2025-09-24 01:57:17.577] The R5 Autosar Classic is running [2025-09-24 01:57:17.577] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:57:17.577] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:57:18.184] INIT: version 2.96 booting [2025-09-24 01:57:18.296] INIT: Entering runlevel: 5 [2025-09-24 01:57:18.440] mtd24 attached [2025-09-24 01:57:18.456] mtd28 attached [2025-09-24 01:57:18.472] mtd32 attached [2025-09-24 01:57:18.520] RTNETLINK answers: File exists [2025-09-24 01:57:18.520] ubi0:textures is mounted. [2025-09-24 01:57:18.581] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:57:18.581] ubi2:dml_code is mounted. [2025-09-24 01:57:18.581] ubi1:animations is mounted. [2025-09-24 01:57:18.581] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:57:18.581] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:57:18.581] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:57:18.581] data.LB_FadeInType0=100 [2025-09-24 01:57:18.581] data.CHLH_FadeInType0=0 [2025-09-24 01:57:18.581] data.WU_FadeInDelay=0 [2025-09-24 01:57:18.581] max_time_out=0 [2025-09-24 01:57:18.581] No splash screen [2025-09-24 01:57:18.581] stop dss Done [2025-09-24 01:57:18.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:57:18.647] /dev/mem opened. [2025-09-24 01:57:18.647] Memory mapped at address 0xffffac4d1000. [2025-09-24 01:57:18.647] Read at address 0x00600018 (0xffffac4d1018): 0x00000000 [2025-09-24 01:57:18.647] Write at address 0x00600018 (0xffffac4d1018): 0x00400040, readback 0x00400040 [2025-09-24 01:57:18.679] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:57:18.695] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:57:18.807] Loaded PowerVR consumer services. [2025-09-24 01:57:18.933] Waiting data available... [2025-09-24 01:57:18.933] 512+0 records in [2025-09-24 01:57:18.933] 512+0 records out [2025-09-24 01:57:18.965] Starting syslogd/klogd: done [2025-09-24 01:57:18.981] DML Start [2025-09-24 01:57:19.157] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:57:19.396] DML res1: 0 [2025-09-24 01:57:19.828] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:57:19.844] Read Success [2025-09-24 01:57:19.844] Verifying certificate... [2025-09-24 01:57:20.100] Verified OK [2025-09-24 01:57:20.116] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:57:21.827] Verified OK [2025-09-24 01:57:21.843] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:57:22.419] Verified OK [2025-09-24 01:57:22.419] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:57:24.960] fs.protected_hardlinks = 1 [2025-09-24 01:57:24.960] fs.protected_symlinks = 1 [2025-09-24 01:57:24.976] kernel.modules_disabled = 1 [2025-09-24 01:57:25.168] [2025-09-24 01:57:25.168] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:57:26.497] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:57:34.253] SBL1:1210.0.1.0 [2025-09-24 01:57:34.301] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:57:35.868] SBL2:1210.0.1.0 [2025-09-24 01:57:35.899] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:57:36.012] j-A [2025-09-24 01:57:43.368] The R5 Autosar Classic is running [2025-09-24 01:57:43.368] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:57:43.389] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:57:43.996] INIT: version 2.96 booting [2025-09-24 01:57:44.108] INIT: Entering runlevel: 5 [2025-09-24 01:57:44.268] mtd32 attached [2025-09-24 01:57:44.268] mtd24 attached [2025-09-24 01:57:44.284] mtd28 attached [2025-09-24 01:57:44.332] RTNETLINK answers: File exists [2025-09-24 01:57:44.332] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:57:44.377] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:57:44.377] ubi0:dml_code is mounted. [2025-09-24 01:57:44.377] ubi2:animations is mounted. [2025-09-24 01:57:44.377] ubi1:textures is mounted. [2025-09-24 01:57:44.377] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:57:44.377] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:57:44.377] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:57:44.377] data.LB_FadeInType0=100 [2025-09-24 01:57:44.377] data.CHLH_FadeInType0=0 [2025-09-24 01:57:44.398] data.WU_FadeInDelay=0 [2025-09-24 01:57:44.398] max_time_out=0 [2025-09-24 01:57:44.398] No splash screen [2025-09-24 01:57:44.398] stop dss Done [2025-09-24 01:57:44.430] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:57:44.430] /dev/mem opened. [2025-09-24 01:57:44.462] Memory mapped at address 0xffff8f11a000. [2025-09-24 01:57:44.462] Read at address 0x00600018 (0xffff8f11a018): 0x00000000 [2025-09-24 01:57:44.462] Write at address 0x00600018 (0xffff8f11a018): 0x00400040, readback 0x00400040 [2025-09-24 01:57:44.462] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:57:44.670] Loaded PowerVR consumer services. [2025-09-24 01:57:44.718] 512+0 records in [2025-09-24 01:57:44.718] 512+0 records out [2025-09-24 01:57:44.734] Waiting data available... [2025-09-24 01:57:44.766] Starting syslogd/klogd: done [2025-09-24 01:57:44.782] DML Start [2025-09-24 01:57:44.957] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:57:45.181] DML res1: 0 [2025-09-24 01:57:45.635] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:57:45.635] Read Success [2025-09-24 01:57:45.635] Verifying certificate... [2025-09-24 01:57:45.859] Verified OK [2025-09-24 01:57:45.875] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:57:47.631] Verified OK [2025-09-24 01:57:47.631] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:57:48.271] Verified OK [2025-09-24 01:57:48.271] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:57:50.813] fs.protected_hardlinks = 1 [2025-09-24 01:57:50.813] fs.protected_symlinks = 1 [2025-09-24 01:57:50.829] kernel.modules_disabled = 1 [2025-09-24 01:57:51.021] [2025-09-24 01:57:51.021] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:57:52.247] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:58:00.078] SBL1:1210.0.1.0 [2025-09-24 01:58:00.126] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:58:01.692] SBL2:1210.0.1.0 [2025-09-24 01:58:01.740] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 01:58:01.836] j-A [2025-09-24 01:58:09.191] The R5 Autosar Classic is running [2025-09-24 01:58:09.215] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:58:09.215] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:58:09.823] INIT: version 2.96 booting [2025-09-24 01:58:09.935] INIT: Entering runlevel: 5 [2025-09-24 01:58:10.095] mtd28 attached [2025-09-24 01:58:10.095] mtd24 attached [2025-09-24 01:58:10.111] mtd32 attached [2025-09-24 01:58:10.159] RTNETLINK answers: File exists [2025-09-24 01:58:10.203] ubi1:textures is mounted. [2025-09-24 01:58:10.203] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:58:10.203] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:58:10.203] ubi0:animations is mounted. [2025-09-24 01:58:10.203] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:58:10.203] ubi2:dml_code is mounted. [2025-09-24 01:58:10.203] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:58:10.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:58:10.203] data.LB_FadeInType0=100 [2025-09-24 01:58:10.224] data.CHLH_FadeInType0=0 [2025-09-24 01:58:10.224] data.WU_FadeInDelay=0 [2025-09-24 01:58:10.224] max_time_out=0 [2025-09-24 01:58:10.224] No splash screen [2025-09-24 01:58:10.224] stop dss Done [2025-09-24 01:58:10.240] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:58:10.256] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:58:10.306] /dev/mem opened. [2025-09-24 01:58:10.306] Memory mapped at address 0xffff999f3000. [2025-09-24 01:58:10.306] Read at address 0x00600018 (0xffff999f3018): 0x00000000 [2025-09-24 01:58:10.306] Write at address 0x00600018 (0xffff999f3018): 0x00400040, readback 0x00400040 [2025-09-24 01:58:10.370] Loaded PowerVR consumer services. [2025-09-24 01:58:10.545] Waiting data available... [2025-09-24 01:58:10.545] 512+0 records in [2025-09-24 01:58:10.545] 512+0 records out [2025-09-24 01:58:10.593] Starting syslogd/klogd: done [2025-09-24 01:58:10.610] DML Start [2025-09-24 01:58:10.754] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:58:11.009] DML res1: 0 [2025-09-24 01:58:11.442] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:58:11.463] Read Success [2025-09-24 01:58:11.463] Verifying certificate... [2025-09-24 01:58:11.686] Verified OK [2025-09-24 01:58:11.703] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:58:13.346] Verified OK [2025-09-24 01:58:13.346] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:58:13.992] Verified OK [2025-09-24 01:58:13.992] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:58:16.613] fs.protected_hardlinks = 1 [2025-09-24 01:58:16.613] fs.protected_symlinks = 1 [2025-09-24 01:58:16.629] kernel.modules_disabled = 1 [2025-09-24 01:58:16.821] [2025-09-24 01:58:16.821] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:58:18.109] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:58:25.899] SBL1:1210.0.1.0 [2025-09-24 01:58:25.947] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:58:27.514] SBL2:1210.0.1.0 [2025-09-24 01:58:27.546] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 01:58:27.658] j-A [2025-09-24 01:58:35.034] The R5 Autosar Classic is running [2025-09-24 01:58:35.034] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:58:35.034] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:58:35.642] INIT: version 2.96 booting [2025-09-24 01:58:35.753] INIT: Entering runlevel: 5 [2025-09-24 01:58:35.898] mtd24 attached [2025-09-24 01:58:35.914] mtd28 attached [2025-09-24 01:58:35.930] mtd32 attached [2025-09-24 01:58:36.040] ubi0:textures is mounted. [2025-09-24 01:58:36.040] ubi1:animations is mounted. [2025-09-24 01:58:36.040] RTNETLINK answers: File exists [2025-09-24 01:58:36.040] ubi2:dml_code is mounted. [2025-09-24 01:58:36.040] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:58:36.040] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:58:36.040] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:58:36.040] data.LB_FadeInType0=100 [2025-09-24 01:58:36.040] data.CHLH_FadeInType0=0 [2025-09-24 01:58:36.040] data.WU_FadeInDelay=0 [2025-09-24 01:58:36.040] max_time_out=0 [2025-09-24 01:58:36.040] No splash screen [2025-09-24 01:58:36.040] stop dss Done [2025-09-24 01:58:36.040] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:58:36.040] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:58:36.087] /dev/mem opened. [2025-09-24 01:58:36.087] Memory mapped at address 0xffff96976000. [2025-09-24 01:58:36.113] Read at address 0x00600018 (0xffff96976018): 0x00000000 [2025-09-24 01:58:36.113] Write at address 0x00600018 (0xffff96976018): 0x00400040, readback 0x00400040 [2025-09-24 01:58:36.146] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:58:36.162] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:58:36.306] Loaded PowerVR consumer services. [2025-09-24 01:58:36.354] 512+0 records in [2025-09-24 01:58:36.354] 512+0 records out [2025-09-24 01:58:36.401] Starting syslogd/klogd: Waiting data available... [2025-09-24 01:58:36.417] done [2025-09-24 01:58:36.417] DML Start [2025-09-24 01:58:36.594] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:58:36.801] DML res1: 0 [2025-09-24 01:58:37.281] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:58:37.297] Read Success [2025-09-24 01:58:37.297] Verifying certificate... [2025-09-24 01:58:37.568] Verified OK [2025-09-24 01:58:37.584] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:58:39.326] Verified OK [2025-09-24 01:58:39.326] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:58:39.870] Verified OK [2025-09-24 01:58:39.870] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:58:42.348] fs.protected_hardlinks = 1 [2025-09-24 01:58:42.365] fs.protected_symlinks = 1 [2025-09-24 01:58:42.381] kernel.modules_disabled = 1 [2025-09-24 01:58:42.572] [2025-09-24 01:58:42.572] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:58:43.925] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:58:51.694] SBL1:1210.0.1.0 [2025-09-24 01:58:51.725] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:58:53.308] SBL2:1210.0.1.0 [2025-09-24 01:58:53.340] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 01:58:53.452] j-A [2025-09-24 01:59:00.827] The R5 Autosar Classic is running [2025-09-24 01:59:00.827] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:59:00.827] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:59:01.434] INIT: version 2.96 booting [2025-09-24 01:59:01.546] INIT: Entering runlevel: 5 [2025-09-24 01:59:01.706] mtd28 attached [2025-09-24 01:59:01.706] mtd24 attached [2025-09-24 01:59:01.722] mtd32 attached [2025-09-24 01:59:01.803] ubi0:animations is mounted. [2025-09-24 01:59:01.803] RTNETLINK answers: File exists [2025-09-24 01:59:01.803] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:59:01.803] ubi1:textures is mounted. [2025-09-24 01:59:01.803] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:59:01.803] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:59:01.803] ubi2:dml_code is mounted. [2025-09-24 01:59:01.803] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:59:01.803] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:59:01.828] data.LB_FadeInType0=100 [2025-09-24 01:59:01.828] data.CHLH_FadeInType0=0 [2025-09-24 01:59:01.828] data.WU_FadeInDelay=0 [2025-09-24 01:59:01.828] max_time_out=0 [2025-09-24 01:59:01.828] No splash screen [2025-09-24 01:59:01.828] stop dss Done [2025-09-24 01:59:01.860] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:59:01.902] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:59:01.902] /dev/mem opened. [2025-09-24 01:59:01.902] Memory mapped at address 0xffff8b89c000. [2025-09-24 01:59:01.902] Read at address 0x00600018 (0xffff8b89c018): 0x00000000 [2025-09-24 01:59:01.902] Write at address 0x00600018 (0xffff8b89c018): 0x00400040, readback 0x00400040 [2025-09-24 01:59:02.030] Loaded PowerVR consumer services. [2025-09-24 01:59:02.166] Waiting data available... [2025-09-24 01:59:02.166] 512+0 records in [2025-09-24 01:59:02.166] 512+0 records out [2025-09-24 01:59:02.182] Starting syslogd/klogd: done [2025-09-24 01:59:02.214] DML Start [2025-09-24 01:59:02.391] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:59:02.614] DML res1: 0 [2025-09-24 01:59:03.046] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:59:03.067] Read Success [2025-09-24 01:59:03.067] Verifying certificate... [2025-09-24 01:59:03.387] Verified OK [2025-09-24 01:59:03.387] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:59:05.066] Verified OK [2025-09-24 01:59:05.066] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:59:05.632] Verified OK [2025-09-24 01:59:05.632] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:59:08.175] fs.protected_hardlinks = 1 [2025-09-24 01:59:08.175] fs.protected_symlinks = 1 [2025-09-24 01:59:08.191] kernel.modules_disabled = 1 [2025-09-24 01:59:08.383] [2025-09-24 01:59:08.383] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:59:09.721] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:59:17.489] SBL1:1210.0.1.0 [2025-09-24 01:59:17.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:59:19.104] SBL2:1210.0.1.0 [2025-09-24 01:59:19.136] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:59:19.248] j-A [2025-09-24 01:59:26.602] The R5 Autosar Classic is running [2025-09-24 01:59:26.602] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:59:26.623] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:59:27.230] INIT: version 2.96 booting [2025-09-24 01:59:27.342] INIT: Entering runlevel: 5 [2025-09-24 01:59:27.503] mtd28 attached [2025-09-24 01:59:27.519] mtd32 attached [2025-09-24 01:59:27.519] mtd24 attached [2025-09-24 01:59:27.550] ubi0:animations is mounted. [2025-09-24 01:59:27.633] RTNETLINK answers: File exists [2025-09-24 01:59:27.633] ubi1:dml_code is mounted. [2025-09-24 01:59:27.633] ubi2:textures is mounted. [2025-09-24 01:59:27.633] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:59:27.633] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:59:27.633] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:59:27.633] data.LB_FadeInType0=100 [2025-09-24 01:59:27.633] data.CHLH_FadeInType0=0 [2025-09-24 01:59:27.633] data.WU_FadeInDelay=0 [2025-09-24 01:59:27.633] max_time_out=0 [2025-09-24 01:59:27.633] No splash screen [2025-09-24 01:59:27.633] stop dss Done [2025-09-24 01:59:27.633] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:59:27.633] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:59:27.698] /dev/mem opened. [2025-09-24 01:59:27.698] Memory mapped at address 0xffff9b2ce000. [2025-09-24 01:59:27.698] Read at address 0x00600018 (0xffff9b2ce018): 0x00000000 [2025-09-24 01:59:27.698] Write at address 0x00600018 (0xffff9b2ce018): 0x00400040, readback 0x00400040 [2025-09-24 01:59:27.742] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:59:27.742] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:59:27.901] Loaded PowerVR consumer services. [2025-09-24 01:59:27.949] 512+0 records in [2025-09-24 01:59:27.949] 512+0 records out [2025-09-24 01:59:27.965] Waiting data available... [2025-09-24 01:59:28.013] Starting syslogd/klogd: done [2025-09-24 01:59:28.029] DML Start [2025-09-24 01:59:28.173] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:59:28.397] DML res1: 0 [2025-09-24 01:59:28.964] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:59:28.964] Read Success [2025-09-24 01:59:28.964] Verifying certificate... [2025-09-24 01:59:29.251] Verified OK [2025-09-24 01:59:29.283] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:59:31.002] Verified OK [2025-09-24 01:59:31.002] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:59:31.563] Verified OK [2025-09-24 01:59:31.579] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:59:34.073] fs.protected_hardlinks = 1 [2025-09-24 01:59:34.073] fs.protected_symlinks = 1 [2025-09-24 01:59:34.089] kernel.modules_disabled = 1 [2025-09-24 01:59:34.281] [2025-09-24 01:59:34.281] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 01:59:35.523] RTNETLINK answers: Cannot assign requested address [2025-09-24 01:59:43.297] SBL1:1210.0.1.0 [2025-09-24 01:59:43.328] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:59:44.911] SBL2:1210.0.1.0 [2025-09-24 01:59:44.944] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 01:59:45.055] j-A [2025-09-24 01:59:52.429] The R5 Autosar Classic is running [2025-09-24 01:59:52.429] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 01:59:52.429] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 01:59:53.036] INIT: version 2.96 booting [2025-09-24 01:59:53.148] INIT: Entering runlevel: 5 [2025-09-24 01:59:53.292] mtd32 attached [2025-09-24 01:59:53.308] mtd24 attached [2025-09-24 01:59:53.324] mtd28 attached [2025-09-24 01:59:53.425] ubi0:dml_code is mounted. [2025-09-24 01:59:53.425] RTNETLINK answers: File exists [2025-09-24 01:59:53.425] ubi1:textures is mounted. [2025-09-24 01:59:53.425] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 01:59:53.425] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 01:59:53.425] ubi2:animations is mounted. [2025-09-24 01:59:53.425] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 01:59:53.425] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 01:59:53.425] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 01:59:53.425] data.LB_FadeInType0=100 [2025-09-24 01:59:53.425] data.CHLH_FadeInType0=0 [2025-09-24 01:59:53.425] data.WU_FadeInDelay=0 [2025-09-24 01:59:53.425] max_time_out=0 [2025-09-24 01:59:53.425] No splash screen [2025-09-24 01:59:53.425] stop dss Done [2025-09-24 01:59:53.505] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 01:59:53.505] /dev/mem opened. [2025-09-24 01:59:53.505] Memory mapped at address 0xffff8da7b000. [2025-09-24 01:59:53.505] Read at address 0x00600018 (0xffff8da7b018): 0x00000000 [2025-09-24 01:59:53.505] Write at address 0x00600018 (0xffff8da7b018): 0x00400040, readback 0x00400040 [2025-09-24 01:59:53.505] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 01:59:53.697] Loaded PowerVR consumer services. [2025-09-24 01:59:53.759] 512+0 records in [2025-09-24 01:59:53.759] 512+0 records out [2025-09-24 01:59:53.759] Waiting data available... [2025-09-24 01:59:53.790] Starting syslogd/klogd: done [2025-09-24 01:59:53.806] DML Start [2025-09-24 01:59:53.983] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 01:59:54.191] DML res1: 0 [2025-09-24 01:59:54.670] Read DML Algo certificate (mtd31) and save to file [2025-09-24 01:59:54.691] Read Success [2025-09-24 01:59:54.691] Verifying certificate... [2025-09-24 01:59:54.931] Verified OK [2025-09-24 01:59:54.963] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 01:59:56.606] Verified OK [2025-09-24 01:59:56.606] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 01:59:57.182] Verified OK [2025-09-24 01:59:57.182] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 01:59:59.944] fs.protected_hardlinks = 1 [2025-09-24 01:59:59.944] fs.protected_symlinks = 1 [2025-09-24 01:59:59.944] kernel.modules_disabled = 1 [2025-09-24 02:00:00.119] [2025-09-24 02:00:00.119] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:00:01.302] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:00:09.118] SBL1:1210.0.1.0 [2025-09-24 02:00:09.150] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:00:10.734] SBL2:1210.0.1.0 [2025-09-24 02:00:10.765] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:00:10.877] j-A [2025-09-24 02:00:18.251] The R5 Autosar Classic is running [2025-09-24 02:00:18.251] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:00:18.251] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:00:18.858] INIT: version 2.96 booting [2025-09-24 02:00:18.970] INIT: Entering runlevel: 5 [2025-09-24 02:00:19.114] mtd24 attached [2025-09-24 02:00:19.130] mtd28 attached [2025-09-24 02:00:19.146] mtd32 attached [2025-09-24 02:00:19.229] RTNETLINK answers: File exists [2025-09-24 02:00:19.229] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:00:19.229] ubi0:textures is mounted. [2025-09-24 02:00:19.229] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:00:19.229] ubi1:animations is mounted. [2025-09-24 02:00:19.229] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:00:19.229] ubi2:dml_code is mounted. [2025-09-24 02:00:19.229] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:00:19.229] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:00:19.257] data.LB_FadeInType0=100 [2025-09-24 02:00:19.257] data.CHLH_FadeInType0=0 [2025-09-24 02:00:19.257] data.WU_FadeInDelay=0 [2025-09-24 02:00:19.257] max_time_out=0 [2025-09-24 02:00:19.257] No splash screen [2025-09-24 02:00:19.257] stop dss Done [2025-09-24 02:00:19.335] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:00:19.335] /dev/mem opened. [2025-09-24 02:00:19.335] Memory mapped at address 0xffff9f3f1000. [2025-09-24 02:00:19.335] Read at address 0x00600018 (0xffff9f3f1018): 0x00000000 [2025-09-24 02:00:19.335] Write at address 0x00600018 (0xffff9f3f1018): 0x00400040, readback 0x00400040 [2025-09-24 02:00:19.335] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:00:19.559] Loaded PowerVR consumer services. [2025-09-24 02:00:19.607] 512+0 records in [2025-09-24 02:00:19.607] 512+0 records out [2025-09-24 02:00:19.622] Waiting data available... [2025-09-24 02:00:19.654] Starting syslogd/klogd: done [2025-09-24 02:00:19.671] DML Start [2025-09-24 02:00:19.846] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:00:20.054] DML res1: 0 [2025-09-24 02:00:20.486] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:00:20.502] Read Success [2025-09-24 02:00:20.502] Verifying certificate... [2025-09-24 02:00:20.774] Verified OK [2025-09-24 02:00:20.790] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:00:22.508] Verified OK [2025-09-24 02:00:22.508] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:00:23.128] Verified OK [2025-09-24 02:00:23.128] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:00:25.766] fs.protected_hardlinks = 1 [2025-09-24 02:00:25.782] fs.protected_symlinks = 1 [2025-09-24 02:00:25.782] kernel.modules_disabled = 1 [2025-09-24 02:00:25.975] [2025-09-24 02:00:25.975] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:00:27.138] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:00:34.909] SBL1:1210.0.1.0 [2025-09-24 02:00:34.941] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:00:36.524] SBL2:1210.0.1.0 [2025-09-24 02:00:36.556] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:00:36.668] j-A [2025-09-24 02:00:44.042] The R5 Autosar Classic is running [2025-09-24 02:00:44.042] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:00:44.042] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:00:44.650] INIT: version 2.96 booting [2025-09-24 02:00:44.746] INIT: Entering runlevel: 5 [2025-09-24 02:00:44.905] mtd24 attached [2025-09-24 02:00:44.921] mtd28 attached [2025-09-24 02:00:44.921] mtd32 attached [2025-09-24 02:00:44.986] RTNETLINK answers: File exists [2025-09-24 02:00:44.986] ubi1:animations is mounted. [2025-09-24 02:00:45.025] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:00:45.025] ubi0:textures is mounted. [2025-09-24 02:00:45.025] ubi2:dml_code is mounted. [2025-09-24 02:00:45.025] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:00:45.025] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:00:45.025] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:00:45.025] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:00:45.048] data.LB_FadeInType0=100 [2025-09-24 02:00:45.048] data.CHLH_FadeInType0=0 [2025-09-24 02:00:45.048] data.WU_FadeInDelay=0 [2025-09-24 02:00:45.048] max_time_out=0 [2025-09-24 02:00:45.048] No splash screen [2025-09-24 02:00:45.048] stop dss Done [2025-09-24 02:00:45.095] /dev/mem opened. [2025-09-24 02:00:45.140] Memory mapped at address 0xffffaba8d000. [2025-09-24 02:00:45.140] Read at address 0x00600018 (0xffffaba8d018): 0x00000000 [2025-09-24 02:00:45.140] Write at address 0x00600018 (0xffffaba8d018): 0x00400040, readback 0x00400040 [2025-09-24 02:00:45.140] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:00:45.140] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:00:45.332] Loaded PowerVR consumer services. [2025-09-24 02:00:45.364] 512+0 records in [2025-09-24 02:00:45.364] 512+0 records out [2025-09-24 02:00:45.364] Waiting data available... [2025-09-24 02:00:45.411] Starting syslogd/klogd: done [2025-09-24 02:00:45.427] DML Start [2025-09-24 02:00:45.635] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:00:45.844] DML res1: 0 [2025-09-24 02:00:46.275] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:00:46.275] Read Success [2025-09-24 02:00:46.291] Verifying certificate... [2025-09-24 02:00:46.563] Verified OK [2025-09-24 02:00:46.579] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:00:48.183] Verified OK [2025-09-24 02:00:48.183] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:00:48.775] Verified OK [2025-09-24 02:00:48.775] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:00:51.443] fs.protected_hardlinks = 1 [2025-09-24 02:00:51.443] fs.protected_symlinks = 1 [2025-09-24 02:00:51.443] kernel.modules_disabled = 1 [2025-09-24 02:00:51.635] [2025-09-24 02:00:51.635] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:00:52.928] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:01:00.728] SBL1:1210.0.1.0 [2025-09-24 02:01:00.776] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:01:02.360] SBL2:1210.0.1.0 [2025-09-24 02:01:02.391] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:01:02.503] j-A [2025-09-24 02:01:09.843] The R5 Autosar Classic is running [2025-09-24 02:01:09.868] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:01:09.868] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:01:10.475] INIT: version 2.96 booting [2025-09-24 02:01:10.588] INIT: Entering runlevel: 5 [2025-09-24 02:01:10.747] mtd24 attached [2025-09-24 02:01:10.747] mtd28 attached [2025-09-24 02:01:10.763] mtd32 attached [2025-09-24 02:01:10.811] ubi0:textures is mounted. [2025-09-24 02:01:10.811] ubi1:animations is mounted. [2025-09-24 02:01:10.877] RTNETLINK answers: File exists [2025-09-24 02:01:10.877] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:01:10.877] ubi2:dml_code is mounted. [2025-09-24 02:01:10.877] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:01:10.877] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:01:10.877] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:01:10.877] data.LB_FadeInType0=100 [2025-09-24 02:01:10.877] data.CHLH_FadeInType0=0 [2025-09-24 02:01:10.877] data.WU_FadeInDelay=0 [2025-09-24 02:01:10.877] max_time_out=0 [2025-09-24 02:01:10.877] No splash screen [2025-09-24 02:01:10.877] stop dss Done [2025-09-24 02:01:10.877] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:01:10.925] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:01:10.957] /dev/mem opened. [2025-09-24 02:01:10.957] Memory mapped at address 0xffffb652c000. [2025-09-24 02:01:10.957] Read at address 0x00600018 (0xffffb652c018): 0x00000000 [2025-09-24 02:01:10.957] Write at address 0x00600018 (0xffffb652c018): 0x00400040, readback 0x00400040 [2025-09-24 02:01:10.957] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:01:11.053] Loaded PowerVR consumer services. [2025-09-24 02:01:11.206] Waiting data available... [2025-09-24 02:01:11.206] 512+0 records in [2025-09-24 02:01:11.206] 512+0 records out [2025-09-24 02:01:11.222] Starting syslogd/klogd: done [2025-09-24 02:01:11.238] DML Start [2025-09-24 02:01:11.430] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:01:11.654] DML res1: 0 [2025-09-24 02:01:12.101] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:01:12.101] Read Success [2025-09-24 02:01:12.117] Verifying certificate... [2025-09-24 02:01:12.422] Verified OK [2025-09-24 02:01:12.438] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:01:14.164] Verified OK [2025-09-24 02:01:14.164] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:01:14.747] Verified OK [2025-09-24 02:01:14.747] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:01:17.303] fs.protected_hardlinks = 1 [2025-09-24 02:01:17.303] fs.protected_symlinks = 1 [2025-09-24 02:01:17.303] kernel.modules_disabled = 1 [2025-09-24 02:01:17.495] [2025-09-24 02:01:17.495] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:01:18.720] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:01:26.530] SBL1:1210.0.1.0 [2025-09-24 02:01:26.561] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:01:28.144] SBL2:1210.0.1.0 [2025-09-24 02:01:28.176] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:01:28.289] j-A [2025-09-24 02:01:35.629] The R5 Autosar Classic is running [2025-09-24 02:01:35.654] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:01:35.654] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:01:36.261] INIT: version 2.96 booting [2025-09-24 02:01:36.373] INIT: Entering runlevel: 5 [2025-09-24 02:01:36.533] mtd32 attached [2025-09-24 02:01:36.533] mtd28 attached [2025-09-24 02:01:36.549] mtd24 attached [2025-09-24 02:01:36.581] ubi0:dml_code is mounted. [2025-09-24 02:01:36.597] RTNETLINK answers: File exists [2025-09-24 02:01:36.638] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:01:36.638] ubi1:animations is mounted. [2025-09-24 02:01:36.638] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:01:36.638] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:01:36.638] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:01:36.638] ubi2:textures is mounted. [2025-09-24 02:01:36.638] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:01:36.667] data.LB_FadeInType0=100 [2025-09-24 02:01:36.667] data.CHLH_FadeInType0=0 [2025-09-24 02:01:36.667] data.WU_FadeInDelay=0 [2025-09-24 02:01:36.667] max_time_out=0 [2025-09-24 02:01:36.667] No splash screen [2025-09-24 02:01:36.667] stop dss Done [2025-09-24 02:01:36.682] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:01:36.713] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:01:36.751] /dev/mem opened. [2025-09-24 02:01:36.751] Memory mapped at address 0xffffbd784000. [2025-09-24 02:01:36.751] Read at address 0x00600018 (0xffffbd784018): 0x00000000 [2025-09-24 02:01:36.751] Write at address 0x00600018 (0xffffbd784018): 0x00400040, readback 0x00400040 [2025-09-24 02:01:36.926] Loaded PowerVR consumer services. [2025-09-24 02:01:36.958] 512+0 records in [2025-09-24 02:01:36.958] 512+0 records out [2025-09-24 02:01:37.007] Waiting data available... [2025-09-24 02:01:37.023] Starting syslogd/klogd: done [2025-09-24 02:01:37.039] DML Start [2025-09-24 02:01:37.214] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:01:37.390] DML res1: 0 [2025-09-24 02:01:37.956] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:01:37.956] Read Success [2025-09-24 02:01:37.956] Verifying certificate... [2025-09-24 02:01:38.196] Verified OK [2025-09-24 02:01:38.211] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:01:39.859] Verified OK [2025-09-24 02:01:39.859] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:01:40.445] Verified OK [2025-09-24 02:01:40.445] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:01:43.147] fs.protected_hardlinks = 1 [2025-09-24 02:01:43.147] fs.protected_symlinks = 1 [2025-09-24 02:01:43.163] kernel.modules_disabled = 1 [2025-09-24 02:01:43.355] [2025-09-24 02:01:43.355] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:01:44.532] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:01:52.320] SBL1:1210.0.1.0 [2025-09-24 02:01:52.368] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:01:53.934] SBL2:1210.0.1.0 [2025-09-24 02:01:53.982] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:01:54.078] j-A [2025-09-24 02:02:01.434] The R5 Autosar Classic is running [2025-09-24 02:02:01.457] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:02:01.457] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:02:02.065] INIT: version 2.96 booting [2025-09-24 02:02:02.176] INIT: Entering runlevel: 5 [2025-09-24 02:02:02.337] mtd32 attached [2025-09-24 02:02:02.353] mtd28 attached [2025-09-24 02:02:02.353] mtd24 attached [2025-09-24 02:02:02.385] RTNETLINK answers: File exists [2025-09-24 02:02:02.401] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:02:02.401] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:02:02.446] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:02:02.446] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:02:02.446] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:02:02.446] ubi0:dml_code is mounted. [2025-09-24 02:02:02.446] ubi1:animations is mounted. [2025-09-24 02:02:02.446] ubi2:textures is mounted. [2025-09-24 02:02:02.476] data.LB_FadeInType0=100 [2025-09-24 02:02:02.476] data.CHLH_FadeInType0=0 [2025-09-24 02:02:02.476] data.WU_FadeInDelay=0 [2025-09-24 02:02:02.476] max_time_out=0 [2025-09-24 02:02:02.476] No splash screen [2025-09-24 02:02:02.476] stop dss Done [2025-09-24 02:02:02.545] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:02:02.545] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:02:02.545] /dev/mem opened. [2025-09-24 02:02:02.545] Memory mapped at address 0xffffa1bc2000. [2025-09-24 02:02:02.545] Read at address 0x00600018 (0xffffa1bc2018): 0x00000000 [2025-09-24 02:02:02.545] Write at address 0x00600018 (0xffffa1bc2018): 0x00400040, readback 0x00400040 [2025-09-24 02:02:02.673] Loaded PowerVR consumer services. [2025-09-24 02:02:02.785] 512+0 records in [2025-09-24 02:02:02.785] 512+0 records out [2025-09-24 02:02:02.785] Waiting data available... [2025-09-24 02:02:02.834] Starting syslogd/klogd: done [2025-09-24 02:02:02.850] DML Start [2025-09-24 02:02:03.041] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:02:03.234] DML res1: 0 [2025-09-24 02:02:03.679] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:02:03.679] Read Success [2025-09-24 02:02:03.679] Verifying certificate... [2025-09-24 02:02:03.951] Verified OK [2025-09-24 02:02:03.967] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:02:05.700] Verified OK [2025-09-24 02:02:05.700] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:02:06.276] Verified OK [2025-09-24 02:02:06.276] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:02:08.882] fs.protected_hardlinks = 1 [2025-09-24 02:02:08.882] fs.protected_symlinks = 1 [2025-09-24 02:02:08.898] kernel.modules_disabled = 1 [2025-09-24 02:02:09.090] [2025-09-24 02:02:09.090] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:02:10.301] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:02:18.128] SBL1:1210.0.1.0 [2025-09-24 02:02:18.176] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:02:19.743] SBL2:1210.0.1.0 [2025-09-24 02:02:19.791] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:02:19.887] j-A [2025-09-24 02:02:27.243] The R5 Autosar Classic is running [2025-09-24 02:02:27.265] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:02:27.265] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:02:27.873] INIT: version 2.96 booting [2025-09-24 02:02:27.985] INIT: Entering runlevel: 5 [2025-09-24 02:02:28.129] mtd28 attached [2025-09-24 02:02:28.144] mtd32 attached [2025-09-24 02:02:28.160] mtd24 attached [2025-09-24 02:02:28.176] ubi0:animations is mounted. [2025-09-24 02:02:28.208] RTNETLINK answers: File exists [2025-09-24 02:02:28.261] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:02:28.261] ubi1:dml_code is mounted. [2025-09-24 02:02:28.261] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:02:28.261] ubi2:textures is mounted. [2025-09-24 02:02:28.261] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:02:28.261] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:02:28.261] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:02:28.261] data.LB_FadeInType0=100 [2025-09-24 02:02:28.261] data.CHLH_FadeInType0=0 [2025-09-24 02:02:28.261] data.WU_FadeInDelay=0 [2025-09-24 02:02:28.261] max_time_out=0 [2025-09-24 02:02:28.261] No splash screen [2025-09-24 02:02:28.261] stop dss Done [2025-09-24 02:02:28.331] /dev/mem opened. [2025-09-24 02:02:28.331] Memory mapped at address 0xffffbe4ea000. [2025-09-24 02:02:28.331] Read at address 0x00600018 (0xffffbe4ea018): 0x00000000 [2025-09-24 02:02:28.331] Write at address 0x00600018 (0xffffbe4ea018): 0x00400040, readback 0x00400040 [2025-09-24 02:02:28.362] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:02:28.379] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:02:28.538] Loaded PowerVR consumer services. [2025-09-24 02:02:28.570] 512+0 records in [2025-09-24 02:02:28.586] 512+0 records out [2025-09-24 02:02:28.634] Starting syslogd/klogd: Waiting data available... [2025-09-24 02:02:28.651] done [2025-09-24 02:02:28.651] DML Start [2025-09-24 02:02:28.810] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:02:29.018] DML res1: 0 [2025-09-24 02:02:29.514] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:02:29.530] Read Success [2025-09-24 02:02:29.530] Verifying certificate... [2025-09-24 02:02:29.770] Verified OK [2025-09-24 02:02:29.786] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:02:31.390] Verified OK [2025-09-24 02:02:31.390] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:02:32.053] Verified OK [2025-09-24 02:02:32.053] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:02:34.625] fs.protected_hardlinks = 1 [2025-09-24 02:02:34.625] fs.protected_symlinks = 1 [2025-09-24 02:02:34.625] kernel.modules_disabled = 1 [2025-09-24 02:02:34.816] [2025-09-24 02:02:34.816] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:02:36.127] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:02:43.930] SBL1:1210.0.1.0 [2025-09-24 02:02:43.978] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:02:45.545] SBL2:1210.0.1.0 [2025-09-24 02:02:45.593] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:02:45.689] j-A [2025-09-24 02:02:53.043] The R5 Autosar Classic is running [2025-09-24 02:02:53.065] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:02:53.065] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:02:53.673] INIT: version 2.96 booting [2025-09-24 02:02:53.785] INIT: Entering runlevel: 5 [2025-09-24 02:02:53.945] mtd24 attached [2025-09-24 02:02:53.945] mtd28 attached [2025-09-24 02:02:53.961] mtd32 attached [2025-09-24 02:02:54.071] RTNETLINK answers: File exists [2025-09-24 02:02:54.071] ubi1:animations is mounted. [2025-09-24 02:02:54.071] ubi0:textures is mounted. [2025-09-24 02:02:54.071] ubi2:dml_code is mounted. [2025-09-24 02:02:54.071] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:02:54.071] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:02:54.071] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:02:54.071] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:02:54.071] data.LB_FadeInType0=100 [2025-09-24 02:02:54.071] data.CHLH_FadeInType0=0 [2025-09-24 02:02:54.071] data.WU_FadeInDelay=0 [2025-09-24 02:02:54.071] max_time_out=0 [2025-09-24 02:02:54.071] No splash screen [2025-09-24 02:02:54.071] stop dss Done [2025-09-24 02:02:54.071] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:02:54.134] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:02:54.134] /dev/mem opened. [2025-09-24 02:02:54.134] Memory mapped at address 0xffff933ae000. [2025-09-24 02:02:54.134] Read at address 0x00600018 (0xffff933ae018): 0x00000000 [2025-09-24 02:02:54.134] Write at address 0x00600018 (0xffff933ae018): 0x00400040, readback 0x00400040 [2025-09-24 02:02:54.134] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:02:54.342] Loaded PowerVR consumer services. [2025-09-24 02:02:54.390] Waiting data available... [2025-09-24 02:02:54.422] 512+0 records in [2025-09-24 02:02:54.422] 512+0 records out [2025-09-24 02:02:54.438] Starting syslogd/klogd: done [2025-09-24 02:02:54.454] DML Start [2025-09-24 02:02:54.630] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:02:54.886] DML res1: 0 [2025-09-24 02:02:55.262] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:02:55.262] Read Success [2025-09-24 02:02:55.262] Verifying certificate... [2025-09-24 02:02:55.518] Verified OK [2025-09-24 02:02:55.534] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:02:57.031] Verified OK [2025-09-24 02:02:57.031] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:02:57.604] Verified OK [2025-09-24 02:02:57.604] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:03:00.386] fs.protected_hardlinks = 1 [2025-09-24 02:03:00.416] fs.protected_symlinks = 1 [2025-09-24 02:03:00.416] kernel.modules_disabled = 1 [2025-09-24 02:03:00.592] [2025-09-24 02:03:00.592] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:03:01.966] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:03:09.750] SBL1:1210.0.1.0 [2025-09-24 02:03:09.798] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:03:11.364] SBL2:1210.0.1.0 [2025-09-24 02:03:11.396] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:03:11.508] j-A [2025-09-24 02:03:18.863] The R5 Autosar Classic is running [2025-09-24 02:03:18.863] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:03:18.884] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:03:19.491] INIT: version 2.96 booting [2025-09-24 02:03:19.603] INIT: Entering runlevel: 5 [2025-09-24 02:03:19.762] mtd24 attached [2025-09-24 02:03:19.762] mtd28 attached [2025-09-24 02:03:19.778] mtd32 attached [2025-09-24 02:03:19.794] ubi0:textures is mounted. [2025-09-24 02:03:19.827] RTNETLINK answers: File exists [2025-09-24 02:03:19.866] ubi1:animations is mounted. [2025-09-24 02:03:19.866] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:03:19.866] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:03:19.866] ubi2:dml_code is mounted. [2025-09-24 02:03:19.866] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:03:19.866] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:03:19.866] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:03:19.892] data.LB_FadeInType0=100 [2025-09-24 02:03:19.892] data.CHLH_FadeInType0=0 [2025-09-24 02:03:19.892] data.WU_FadeInDelay=0 [2025-09-24 02:03:19.892] max_time_out=0 [2025-09-24 02:03:19.892] No splash screen [2025-09-24 02:03:19.892] stop dss Done [2025-09-24 02:03:19.924] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:03:19.924] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:03:19.980] /dev/mem opened. [2025-09-24 02:03:19.980] Memory mapped at address 0xffffb0708000. [2025-09-24 02:03:19.980] Read at address 0x00600018 (0xffffb0708018): 0x00000000 [2025-09-24 02:03:19.980] Write at address 0x00600018 (0xffffb0708018): 0x00400040, readback 0x00400040 [2025-09-24 02:03:20.172] Loaded PowerVR consumer services. [2025-09-24 02:03:20.204] Waiting data available... [2025-09-24 02:03:20.204] 512+0 records in [2025-09-24 02:03:20.204] 512+0 records out [2025-09-24 02:03:20.251] Starting syslogd/klogd: done [2025-09-24 02:03:20.857] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:03:20.857] Read Success [2025-09-24 02:03:20.857] Verifying certificate... [2025-09-24 02:03:21.049] Verified OK [2025-09-24 02:03:21.065] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:03:22.030] Verified OK [2025-09-24 02:03:22.030] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:03:22.506] Verified OK [2025-09-24 02:03:22.506] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:03:25.417] fs.protected_hardlinks = 1 [2025-09-24 02:03:25.444] fs.protected_symlinks = 1 [2025-09-24 02:03:25.444] kernel.modules_disabled = 1 [2025-09-24 02:03:25.603] [2025-09-24 02:03:25.603] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:03:28.148] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:03:35.530] SBL1:1210.0.1.0 [2025-09-24 02:03:35.578] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:03:37.145] SBL2:1210.0.1.0 [2025-09-24 02:03:37.192] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:03:37.288] j-A [2025-09-24 02:03:44.642] The R5 Autosar Classic is running [2025-09-24 02:03:44.665] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:03:44.665] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:03:45.273] INIT: version 2.96 booting [2025-09-24 02:03:45.384] INIT: Entering runlevel: 5 [2025-09-24 02:03:45.545] mtd28 attached [2025-09-24 02:03:45.545] mtd32 attached [2025-09-24 02:03:45.560] mtd24 attached [2025-09-24 02:03:45.609] RTNETLINK answers: File exists [2025-09-24 02:03:45.675] ubi1:dml_code is mounted. [2025-09-24 02:03:45.675] ubi0:animations is mounted. [2025-09-24 02:03:45.675] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:03:45.675] ubi2:textures is mounted. [2025-09-24 02:03:45.675] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:03:45.675] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:03:45.675] data.LB_FadeInType0=100 [2025-09-24 02:03:45.675] data.CHLH_FadeInType0=0 [2025-09-24 02:03:45.675] data.WU_FadeInDelay=0 [2025-09-24 02:03:45.675] max_time_out=0 [2025-09-24 02:03:45.675] No splash screen [2025-09-24 02:03:45.675] stop dss Done [2025-09-24 02:03:45.675] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:03:45.675] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:03:45.748] /dev/mem opened. [2025-09-24 02:03:45.748] Memory mapped at address 0xffffabbf8000. [2025-09-24 02:03:45.748] Read at address 0x00600018 (0xffffabbf8018): 0x00000000 [2025-09-24 02:03:45.748] Write at address 0x00600018 (0xffffabbf8018): 0x00400040, readback 0x00400040 [2025-09-24 02:03:45.748] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:03:45.764] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:03:45.972] Loaded PowerVR consumer services. [2025-09-24 02:03:46.004] 512+0 records in [2025-09-24 02:03:46.004] 512+0 records out [2025-09-24 02:03:46.020] Waiting data available... [2025-09-24 02:03:46.052] Starting syslogd/klogd: done [2025-09-24 02:03:46.068] DML Start [2025-09-24 02:03:46.212] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:03:46.436] DML res1: 0 [2025-09-24 02:03:46.925] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:03:46.925] Read Success [2025-09-24 02:03:46.925] Verifying certificate... [2025-09-24 02:03:47.197] Verified OK [2025-09-24 02:03:47.213] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:03:48.850] Verified OK [2025-09-24 02:03:48.850] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:03:49.451] Verified OK [2025-09-24 02:03:49.451] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:03:52.106] fs.protected_hardlinks = 1 [2025-09-24 02:03:52.136] fs.protected_symlinks = 1 [2025-09-24 02:03:52.136] kernel.modules_disabled = 1 [2025-09-24 02:03:52.327] [2025-09-24 02:03:52.327] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:03:53.566] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:04:01.333] SBL1:1210.0.1.0 [2025-09-24 02:04:01.381] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:04:02.949] SBL2:1210.0.1.0 [2025-09-24 02:04:02.996] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:04:03.092] j-A [2025-09-24 02:04:10.447] The R5 Autosar Classic is running [2025-09-24 02:04:10.472] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:04:10.472] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:04:11.079] INIT: version 2.96 booting [2025-09-24 02:04:11.191] INIT: Entering runlevel: 5 [2025-09-24 02:04:11.351] mtd28 attached [2025-09-24 02:04:11.351] mtd32 attached [2025-09-24 02:04:11.367] mtd24 attached [2025-09-24 02:04:11.398] ubi0:animations is mounted. [2025-09-24 02:04:11.415] RTNETLINK answers: File exists [2025-09-24 02:04:11.481] ubi2:textures is mounted. [2025-09-24 02:04:11.481] ubi1:dml_code is mounted. [2025-09-24 02:04:11.481] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:04:11.481] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:04:11.481] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:04:11.481] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:04:11.481] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:04:11.481] data.LB_FadeInType0=100 [2025-09-24 02:04:11.481] data.CHLH_FadeInType0=0 [2025-09-24 02:04:11.481] data.WU_FadeInDelay=0 [2025-09-24 02:04:11.481] max_time_out=0 [2025-09-24 02:04:11.481] No splash screen [2025-09-24 02:04:11.481] stop dss Done [2025-09-24 02:04:11.548] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:04:11.548] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:04:11.548] /dev/mem opened. [2025-09-24 02:04:11.548] Memory mapped at address 0xffffa20fe000. [2025-09-24 02:04:11.548] Read at address 0x00600018 (0xffffa20fe018): 0x00000000 [2025-09-24 02:04:11.548] Write at address 0x00600018 (0xffffa20fe018): 0x00400040, readback 0x00400040 [2025-09-24 02:04:11.723] Loaded PowerVR consumer services. [2025-09-24 02:04:11.788] Waiting data available... [2025-09-24 02:04:11.804] 512+0 records in [2025-09-24 02:04:11.804] 512+0 records out [2025-09-24 02:04:11.836] Starting syslogd/klogd: done [2025-09-24 02:04:11.852] DML Start [2025-09-24 02:04:12.012] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:04:12.283] DML res1: 0 [2025-09-24 02:04:12.682] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:04:12.699] Read Success [2025-09-24 02:04:12.699] Verifying certificate... [2025-09-24 02:04:12.922] Verified OK [2025-09-24 02:04:12.954] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:04:14.585] Verified OK [2025-09-24 02:04:14.585] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:04:15.236] Verified OK [2025-09-24 02:04:15.236] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:04:17.858] fs.protected_hardlinks = 1 [2025-09-24 02:04:17.874] fs.protected_symlinks = 1 [2025-09-24 02:04:17.874] kernel.modules_disabled = 1 [2025-09-24 02:04:18.050] [2025-09-24 02:04:18.050] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:04:19.367] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:04:27.160] SBL1:1210.0.1.0 [2025-09-24 02:04:27.208] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:04:28.774] SBL2:1210.0.1.0 [2025-09-24 02:04:28.822] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:04:28.919] j-A [2025-09-24 02:04:36.273] The R5 Autosar Classic is running [2025-09-24 02:04:36.296] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:04:36.296] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:04:36.904] INIT: version 2.96 booting [2025-09-24 02:04:37.016] INIT: Entering runlevel: 5 [2025-09-24 02:04:37.175] mtd24 attached [2025-09-24 02:04:37.175] mtd32 attached [2025-09-24 02:04:37.192] mtd28 attached [2025-09-24 02:04:37.240] ubi0:textures is mounted. [2025-09-24 02:04:37.240] RTNETLINK answers: File exists [2025-09-24 02:04:37.256] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:04:37.256] ubi2:animations is mounted. [2025-09-24 02:04:37.311] ubi1:dml_code is mounted. [2025-09-24 02:04:37.311] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:04:37.311] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:04:37.311] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:04:37.311] data.LB_FadeInType0=100 [2025-09-24 02:04:37.311] data.CHLH_FadeInType0=0 [2025-09-24 02:04:37.311] data.WU_FadeInDelay=0 [2025-09-24 02:04:37.311] max_time_out=0 [2025-09-24 02:04:37.311] No splash screen [2025-09-24 02:04:37.311] stop dss Done [2025-09-24 02:04:37.311] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:04:37.380] /dev/mem opened. [2025-09-24 02:04:37.380] Memory mapped at address 0xffffa7f0f000. [2025-09-24 02:04:37.380] Read at address 0x00600018 (0xffffa7f0f018): 0x00000000 [2025-09-24 02:04:37.380] Write at address 0x00600018 (0xffffa7f0f018): 0x00400040, readback 0x00400040 [2025-09-24 02:04:37.380] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:04:37.396] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:04:37.476] Loaded PowerVR consumer services. [2025-09-24 02:04:37.631] 512+0 records in [2025-09-24 02:04:37.631] 512+0 records out [2025-09-24 02:04:37.631] Waiting data available... [2025-09-24 02:04:37.647] Starting syslogd/klogd: done [2025-09-24 02:04:37.663] DML Start [2025-09-24 02:04:37.839] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:04:38.047] DML res1: 0 [2025-09-24 02:04:38.526] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:04:38.526] Read Success [2025-09-24 02:04:38.543] Verifying certificate... [2025-09-24 02:04:38.798] Verified OK [2025-09-24 02:04:38.815] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:04:40.477] Verified OK [2025-09-24 02:04:40.477] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:04:41.107] Verified OK [2025-09-24 02:04:41.107] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:04:43.744] fs.protected_hardlinks = 1 [2025-09-24 02:04:43.761] fs.protected_symlinks = 1 [2025-09-24 02:04:43.761] kernel.modules_disabled = 1 [2025-09-24 02:04:43.968] [2025-09-24 02:04:43.968] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:04:45.129] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:04:52.969] SBL1:1210.0.1.0 [2025-09-24 02:04:53.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:04:54.584] SBL2:1210.0.1.0 [2025-09-24 02:04:54.631] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:04:54.727] j-A [2025-09-24 02:05:02.081] The R5 Autosar Classic is running [2025-09-24 02:05:02.106] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:05:02.106] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:05:02.731] INIT: version 2.96 booting [2025-09-24 02:05:02.842] INIT: Entering runlevel: 5 [2025-09-24 02:05:02.987] mtd24 attached [2025-09-24 02:05:03.003] mtd28 attached [2025-09-24 02:05:03.018] mtd32 attached [2025-09-24 02:05:03.034] ubi0:textures is mounted. [2025-09-24 02:05:03.067] ubi1:animations is mounted. [2025-09-24 02:05:03.067] RTNETLINK answers: File exists [2025-09-24 02:05:03.121] ubi2:dml_code is mounted. [2025-09-24 02:05:03.121] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:05:03.121] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:05:03.121] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:05:03.121] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:05:03.121] data.LB_FadeInType0=100 [2025-09-24 02:05:03.121] data.CHLH_FadeInType0=0 [2025-09-24 02:05:03.121] data.WU_FadeInDelay=0 [2025-09-24 02:05:03.121] max_time_out=0 [2025-09-24 02:05:03.121] No splash screen [2025-09-24 02:05:03.121] stop dss Done [2025-09-24 02:05:03.121] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:05:03.153] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:05:03.153] /dev/mem opened. [2025-09-24 02:05:03.185] Memory mapped at address 0xffff8be58000. [2025-09-24 02:05:03.185] Read at address 0x00600018 (0xffff8be58018): 0x00000000 [2025-09-24 02:05:03.185] Write at address 0x00600018 (0xffff8be58018): 0x00400040, readback 0x00400040 [2025-09-24 02:05:03.185] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:05:03.409] Loaded PowerVR consumer services. [2025-09-24 02:05:03.473] 512+0 records in [2025-09-24 02:05:03.473] 512+0 records out [2025-09-24 02:05:03.489] Waiting data available... [2025-09-24 02:05:03.521] Starting syslogd/klogd: done [2025-09-24 02:05:03.537] DML Start [2025-09-24 02:05:03.696] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:05:03.937] DML res1: 0 [2025-09-24 02:05:04.407] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:05:04.407] Read Success [2025-09-24 02:05:04.407] Verifying certificate... [2025-09-24 02:05:04.663] Verified OK [2025-09-24 02:05:04.679] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:05:06.486] Verified OK [2025-09-24 02:05:06.486] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:05:07.058] Verified OK [2025-09-24 02:05:07.058] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:05:09.568] fs.protected_hardlinks = 1 [2025-09-24 02:05:09.568] fs.protected_symlinks = 1 [2025-09-24 02:05:09.584] kernel.modules_disabled = 1 [2025-09-24 02:05:09.775] [2025-09-24 02:05:09.775] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:05:10.990] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:05:18.805] SBL1:1210.0.1.0 [2025-09-24 02:05:18.837] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:05:20.419] SBL2:1210.0.1.0 [2025-09-24 02:05:20.451] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:05:20.564] j-A [2025-09-24 02:05:27.903] The R5 Autosar Classic is running [2025-09-24 02:05:27.928] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:05:27.928] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:05:28.535] INIT: version 2.96 booting [2025-09-24 02:05:28.663] INIT: Entering runlevel: 5 [2025-09-24 02:05:28.807] mtd24 attached [2025-09-24 02:05:28.823] mtd28 attached [2025-09-24 02:05:28.839] mtd32 attached [2025-09-24 02:05:28.856] ubi0:textures is mounted. [2025-09-24 02:05:28.872] RTNETLINK answers: File exists [2025-09-24 02:05:28.887] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:05:28.887] ubi1:animations is mounted. [2025-09-24 02:05:28.920] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:05:28.920] ubi2:dml_code is mounted. [2025-09-24 02:05:28.920] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:05:28.920] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:05:28.920] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:05:28.944] data.LB_FadeInType0=100 [2025-09-24 02:05:28.944] data.CHLH_FadeInType0=0 [2025-09-24 02:05:28.944] data.WU_FadeInDelay=0 [2025-09-24 02:05:28.944] max_time_out=0 [2025-09-24 02:05:28.944] No splash screen [2025-09-24 02:05:28.944] stop dss Done [2025-09-24 02:05:28.976] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:05:28.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:05:29.026] /dev/mem opened. [2025-09-24 02:05:29.026] Memory mapped at address 0xffff916da000. [2025-09-24 02:05:29.026] Read at address 0x00600018 (0xffff916da018): 0x00000000 [2025-09-24 02:05:29.026] Write at address 0x00600018 (0xffff916da018): 0x00400040, readback 0x00400040 [2025-09-24 02:05:29.138] Loaded PowerVR consumer services. [2025-09-24 02:05:29.250] 512+0 records in [2025-09-24 02:05:29.266] 512+0 records out [2025-09-24 02:05:29.266] Waiting data available... [2025-09-24 02:05:29.298] Starting syslogd/klogd: done [2025-09-24 02:05:29.314] DML Start [2025-09-24 02:05:29.474] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:05:29.729] DML res1: 0 [2025-09-24 02:05:30.222] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:05:30.222] Read Success [2025-09-24 02:05:30.222] Verifying certificate... [2025-09-24 02:05:30.462] Verified OK [2025-09-24 02:05:30.494] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:05:32.068] Verified OK [2025-09-24 02:05:32.068] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:05:32.651] Verified OK [2025-09-24 02:05:32.651] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:05:35.337] fs.protected_hardlinks = 1 [2025-09-24 02:05:35.352] fs.protected_symlinks = 1 [2025-09-24 02:05:35.352] kernel.modules_disabled = 1 [2025-09-24 02:05:35.561] [2025-09-24 02:05:35.561] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:05:36.773] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:05:44.596] SBL1:1210.0.1.0 [2025-09-24 02:05:44.644] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:05:46.211] SBL2:1210.0.1.0 [2025-09-24 02:05:46.243] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:05:46.355] j-A [2025-09-24 02:05:53.732] The R5 Autosar Classic is running [2025-09-24 02:05:53.732] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:05:53.732] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:05:54.339] INIT: version 2.96 booting [2025-09-24 02:05:54.451] INIT: Entering runlevel: 5 [2025-09-24 02:05:54.611] mtd24 attached [2025-09-24 02:05:54.627] mtd28 attached [2025-09-24 02:05:54.643] mtd32 attached [2025-09-24 02:05:54.675] ubi0:textures is mounted. [2025-09-24 02:05:54.691] RTNETLINK answers: File exists [2025-09-24 02:05:54.691] ubi1:animations is mounted. [2025-09-24 02:05:54.749] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:05:54.749] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:05:54.749] ubi2:dml_code is mounted. [2025-09-24 02:05:54.749] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:05:54.749] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:05:54.749] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:05:54.749] data.LB_FadeInType0=100 [2025-09-24 02:05:54.749] data.CHLH_FadeInType0=0 [2025-09-24 02:05:54.749] data.WU_FadeInDelay=0 [2025-09-24 02:05:54.749] max_time_out=0 [2025-09-24 02:05:54.749] No splash screen [2025-09-24 02:05:54.749] stop dss Done [2025-09-24 02:05:54.780] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:05:54.796] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:05:54.836] /dev/mem opened. [2025-09-24 02:05:54.836] Memory mapped at address 0xffffae276000. [2025-09-24 02:05:54.836] Read at address 0x00600018 (0xffffae276018): 0x00000000 [2025-09-24 02:05:54.836] Write at address 0x00600018 (0xffffae276018): 0x00400040, readback 0x00400040 [2025-09-24 02:05:54.916] Loaded PowerVR consumer services. [2025-09-24 02:05:55.060] Waiting data available... [2025-09-24 02:05:55.060] 512+0 records in [2025-09-24 02:05:55.060] 512+0 records out [2025-09-24 02:05:55.108] Starting syslogd/klogd: done [2025-09-24 02:05:55.124] DML Start [2025-09-24 02:05:55.300] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:05:55.524] DML res1: 0 [2025-09-24 02:05:56.003] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:05:56.003] Read Success [2025-09-24 02:05:56.019] Verifying certificate... [2025-09-24 02:05:56.275] Verified OK [2025-09-24 02:05:56.291] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:05:58.104] Verified OK [2025-09-24 02:05:58.104] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:05:58.641] Verified OK [2025-09-24 02:05:58.641] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:06:01.184] fs.protected_hardlinks = 1 [2025-09-24 02:06:01.184] fs.protected_symlinks = 1 [2025-09-24 02:06:01.200] kernel.modules_disabled = 1 [2025-09-24 02:06:01.391] [2025-09-24 02:06:01.391] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:06:02.581] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:06:10.391] SBL1:1210.0.1.0 [2025-09-24 02:06:10.439] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:06:12.005] SBL2:1210.0.1.0 [2025-09-24 02:06:12.037] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:06:12.149] j-A [2025-09-24 02:06:19.525] The R5 Autosar Classic is running [2025-09-24 02:06:19.525] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:06:19.525] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:06:20.133] INIT: version 2.96 booting [2025-09-24 02:06:20.244] INIT: Entering runlevel: 5 [2025-09-24 02:06:20.405] mtd32 attached [2025-09-24 02:06:20.405] mtd24 attached [2025-09-24 02:06:20.421] mtd28 attached [2025-09-24 02:06:20.524] ubi0:dml_code is mounted. [2025-09-24 02:06:20.524] RTNETLINK answers: File exists [2025-09-24 02:06:20.524] ubi1:textures is mounted. [2025-09-24 02:06:20.524] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:06:20.524] ubi2:animations is mounted. [2025-09-24 02:06:20.524] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:06:20.524] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:06:20.524] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:06:20.524] data.LB_FadeInType0=100 [2025-09-24 02:06:20.524] data.CHLH_FadeInType0=0 [2025-09-24 02:06:20.524] data.WU_FadeInDelay=0 [2025-09-24 02:06:20.524] max_time_out=0 [2025-09-24 02:06:20.524] No splash screen [2025-09-24 02:06:20.524] stop dss Done [2025-09-24 02:06:20.524] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:06:20.609] /dev/mem opened. [2025-09-24 02:06:20.609] Memory mapped at address 0xffffba863000. [2025-09-24 02:06:20.609] Read at address 0x00600018 (0xffffba863018): 0x00000000 [2025-09-24 02:06:20.609] Write at address 0x00600018 (0xffffba863018): 0x00400040, readback 0x00400040 [2025-09-24 02:06:20.634] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:06:20.634] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:06:20.730] Loaded PowerVR consumer services. [2025-09-24 02:06:20.870] 512+0 records in [2025-09-24 02:06:20.870] 512+0 records out [2025-09-24 02:06:20.870] Waiting data available... [2025-09-24 02:06:20.902] Starting syslogd/klogd: done [2025-09-24 02:06:20.918] DML Start [2025-09-24 02:06:21.062] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:06:21.223] DML res1: 0 [2025-09-24 02:06:21.777] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:06:21.777] Read Success [2025-09-24 02:06:21.777] Verifying certificate... [2025-09-24 02:06:22.065] Verified OK [2025-09-24 02:06:22.081] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:06:23.670] Verified OK [2025-09-24 02:06:23.670] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:06:24.342] Verified OK [2025-09-24 02:06:24.342] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:06:26.979] fs.protected_hardlinks = 1 [2025-09-24 02:06:27.010] fs.protected_symlinks = 1 [2025-09-24 02:06:27.010] kernel.modules_disabled = 1 [2025-09-24 02:06:27.186] [2025-09-24 02:06:27.186] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:06:28.417] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:06:36.181] SBL1:1210.0.1.0 [2025-09-24 02:06:36.229] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:06:37.796] SBL2:1210.0.1.0 [2025-09-24 02:06:37.844] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:06:37.939] j-A [2025-09-24 02:06:45.296] The R5 Autosar Classic is running [2025-09-24 02:06:45.318] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:06:45.318] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:06:45.925] INIT: version 2.96 booting [2025-09-24 02:06:46.037] INIT: Entering runlevel: 5 [2025-09-24 02:06:46.182] mtd24 attached [2025-09-24 02:06:46.198] mtd28 attached [2025-09-24 02:06:46.214] mtd32 attached [2025-09-24 02:06:46.316] RTNETLINK answers: File exists [2025-09-24 02:06:46.316] ubi0:textures is mounted. [2025-09-24 02:06:46.316] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:06:46.316] ubi2:dml_code is mounted. [2025-09-24 02:06:46.316] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:06:46.316] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:06:46.316] ubi1:animations is mounted. [2025-09-24 02:06:46.316] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:06:46.316] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:06:46.316] data.LB_FadeInType0=100 [2025-09-24 02:06:46.316] data.CHLH_FadeInType0=0 [2025-09-24 02:06:46.316] data.WU_FadeInDelay=0 [2025-09-24 02:06:46.316] max_time_out=0 [2025-09-24 02:06:46.316] No splash screen [2025-09-24 02:06:46.316] stop dss Done [2025-09-24 02:06:46.348] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:06:46.389] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:06:46.389] /dev/mem opened. [2025-09-24 02:06:46.389] Memory mapped at address 0xffff80904000. [2025-09-24 02:06:46.389] Read at address 0x00600018 (0xffff80904018): 0x00000000 [2025-09-24 02:06:46.389] Write at address 0x00600018 (0xffff80904018): 0x00400040, readback 0x00400040 [2025-09-24 02:06:46.533] Loaded PowerVR consumer services. [2025-09-24 02:06:46.656] Waiting data available... [2025-09-24 02:06:46.656] 512+0 records in [2025-09-24 02:06:46.656] 512+0 records out [2025-09-24 02:06:46.687] Starting syslogd/klogd: done [2025-09-24 02:06:46.719] DML Start [2025-09-24 02:06:46.880] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:06:47.104] DML res1: 0 [2025-09-24 02:06:47.535] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:06:47.556] Read Success [2025-09-24 02:06:47.556] Verifying certificate... [2025-09-24 02:06:47.812] Verified OK [2025-09-24 02:06:47.828] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:06:49.378] Verified OK [2025-09-24 02:06:49.378] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:06:49.986] Verified OK [2025-09-24 02:06:49.986] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:06:52.544] fs.protected_hardlinks = 1 [2025-09-24 02:06:52.544] fs.protected_symlinks = 1 [2025-09-24 02:06:52.560] kernel.modules_disabled = 1 [2025-09-24 02:06:52.751] [2025-09-24 02:06:52.751] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:06:54.199] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:07:02.013] SBL1:1210.0.1.0 [2025-09-24 02:07:02.045] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:07:03.628] SBL2:1210.0.1.0 [2025-09-24 02:07:03.660] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:07:03.772] j-A [2025-09-24 02:07:11.144] The R5 Autosar Classic is running [2025-09-24 02:07:11.144] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:07:11.144] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:07:11.752] INIT: version 2.96 booting [2025-09-24 02:07:11.864] INIT: Entering runlevel: 5 [2025-09-24 02:07:12.024] mtd28 attached [2025-09-24 02:07:12.024] mtd24 attached [2025-09-24 02:07:12.039] mtd32 attached [2025-09-24 02:07:12.152] RTNETLINK answers: File exists [2025-09-24 02:07:12.152] ubi1:textures is mounted. [2025-09-24 02:07:12.152] ubi0:animations is mounted. [2025-09-24 02:07:12.152] ubi2:dml_code is mounted. [2025-09-24 02:07:12.152] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:07:12.152] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:07:12.152] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:07:12.152] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:07:12.152] data.LB_FadeInType0=100 [2025-09-24 02:07:12.152] data.CHLH_FadeInType0=0 [2025-09-24 02:07:12.152] data.WU_FadeInDelay=0 [2025-09-24 02:07:12.152] max_time_out=0 [2025-09-24 02:07:12.152] No splash screen [2025-09-24 02:07:12.152] stop dss Done [2025-09-24 02:07:12.152] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:07:12.235] /dev/mem opened. [2025-09-24 02:07:12.235] Memory mapped at address 0xffff9eb4b000. [2025-09-24 02:07:12.235] Read at address 0x00600018 (0xffff9eb4b018): 0x00000000 [2025-09-24 02:07:12.235] Write at address 0x00600018 (0xffff9eb4b018): 0x00400040, readback 0x00400040 [2025-09-24 02:07:12.267] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:07:12.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:07:12.379] Loaded PowerVR consumer services. [2025-09-24 02:07:12.490] Waiting data available... [2025-09-24 02:07:12.506] 512+0 records in [2025-09-24 02:07:12.506] 512+0 records out [2025-09-24 02:07:12.538] Starting syslogd/klogd: done [2025-09-24 02:07:12.554] DML Start [2025-09-24 02:07:12.730] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:07:12.954] DML res1: 0 [2025-09-24 02:07:13.368] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:07:13.368] Read Success [2025-09-24 02:07:13.368] Verifying certificate... [2025-09-24 02:07:13.608] Verified OK [2025-09-24 02:07:13.624] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:07:15.292] Verified OK [2025-09-24 02:07:15.292] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:07:15.884] Verified OK [2025-09-24 02:07:15.884] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:07:18.507] fs.protected_hardlinks = 1 [2025-09-24 02:07:18.507] fs.protected_symlinks = 1 [2025-09-24 02:07:18.522] kernel.modules_disabled = 1 [2025-09-24 02:07:18.714] [2025-09-24 02:07:18.714] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:07:20.040] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:07:27.810] SBL1:1210.0.1.0 [2025-09-24 02:07:27.857] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:07:29.424] SBL2:1210.0.1.0 [2025-09-24 02:07:29.456] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:07:29.567] j-A [2025-09-24 02:07:36.922] The R5 Autosar Classic is running [2025-09-24 02:07:36.922] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:07:36.943] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:07:37.550] INIT: version 2.96 booting [2025-09-24 02:07:37.663] INIT: Entering runlevel: 5 [2025-09-24 02:07:37.822] mtd28 attached [2025-09-24 02:07:37.822] mtd32 attached [2025-09-24 02:07:37.838] mtd24 attached [2025-09-24 02:07:37.870] ubi0:animations is mounted. [2025-09-24 02:07:37.886] RTNETLINK answers: File exists [2025-09-24 02:07:37.948] ubi2:textures is mounted. [2025-09-24 02:07:37.948] ubi1:dml_code is mounted. [2025-09-24 02:07:37.948] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:07:37.948] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:07:37.948] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:07:37.948] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:07:37.948] data.LB_FadeInType0=100 [2025-09-24 02:07:37.948] data.CHLH_FadeInType0=0 [2025-09-24 02:07:37.948] data.WU_FadeInDelay=0 [2025-09-24 02:07:37.948] max_time_out=0 [2025-09-24 02:07:37.948] No splash screen [2025-09-24 02:07:37.948] stop dss Done [2025-09-24 02:07:37.948] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:07:37.997] /dev/mem opened. [2025-09-24 02:07:37.997] Memory mapped at address 0xffffac003000. [2025-09-24 02:07:37.997] Read at address 0x00600018 (0xffffac003018): 0x00000000 [2025-09-24 02:07:38.022] Write at address 0x00600018 (0xffffac003018): 0x00400040, readback 0x00400040 [2025-09-24 02:07:38.048] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:07:38.048] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:07:38.176] Loaded PowerVR consumer services. [2025-09-24 02:07:38.272] Waiting data available... [2025-09-24 02:07:38.272] 512+0 records in [2025-09-24 02:07:38.288] 512+0 records out [2025-09-24 02:07:38.320] Starting syslogd/klogd: done [2025-09-24 02:07:38.336] DML Start [2025-09-24 02:07:38.544] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:07:38.752] DML res1: 0 [2025-09-24 02:07:39.179] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:07:39.179] Read Success [2025-09-24 02:07:39.179] Verifying certificate... [2025-09-24 02:07:39.435] Verified OK [2025-09-24 02:07:39.451] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:07:41.162] Verified OK [2025-09-24 02:07:41.162] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:07:41.754] Verified OK [2025-09-24 02:07:41.754] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:07:44.360] fs.protected_hardlinks = 1 [2025-09-24 02:07:44.376] fs.protected_symlinks = 1 [2025-09-24 02:07:44.376] kernel.modules_disabled = 1 [2025-09-24 02:07:44.568] [2025-09-24 02:07:44.568] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:07:45.868] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:07:53.602] SBL1:1210.0.1.0 [2025-09-24 02:07:53.634] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:07:55.217] SBL2:1210.0.1.0 [2025-09-24 02:07:55.249] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:07:55.360] j-A [2025-09-24 02:08:02.730] The R5 Autosar Classic is running [2025-09-24 02:08:02.730] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:08:02.730] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:08:03.338] INIT: version 2.96 booting [2025-09-24 02:08:03.449] INIT: Entering runlevel: 5 [2025-09-24 02:08:03.594] mtd32 attached [2025-09-24 02:08:03.610] mtd24 attached [2025-09-24 02:08:03.626] mtd28 attached [2025-09-24 02:08:03.642] ubi0:dml_code is mounted. [2025-09-24 02:08:03.674] ubi1:textures is mounted. [2025-09-24 02:08:03.674] RTNETLINK answers: File exists [2025-09-24 02:08:03.698] ubi2:animations is mounted. [2025-09-24 02:08:03.698] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:08:03.698] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:08:03.698] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:08:03.732] data.LB_FadeInType0=100 [2025-09-24 02:08:03.732] data.CHLH_FadeInType0=0 [2025-09-24 02:08:03.732] data.WU_FadeInDelay=0 [2025-09-24 02:08:03.732] max_time_out=0 [2025-09-24 02:08:03.732] No splash screen [2025-09-24 02:08:03.732] stop dss Done [2025-09-24 02:08:03.732] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:08:03.732] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:08:03.801] /dev/mem opened. [2025-09-24 02:08:03.801] Memory mapped at address 0xffff988ee000. [2025-09-24 02:08:03.801] Read at address 0x00600018 (0xffff988ee018): 0x00000000 [2025-09-24 02:08:03.801] Write at address 0x00600018 (0xffff988ee018): 0x00400040, readback 0x00400040 [2025-09-24 02:08:03.801] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:08:03.817] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:08:04.009] Loaded PowerVR consumer services. [2025-09-24 02:08:04.041] Waiting data available... [2025-09-24 02:08:04.057] 512+0 records in [2025-09-24 02:08:04.057] 512+0 records out [2025-09-24 02:08:04.089] Starting syslogd/klogd: done [2025-09-24 02:08:04.105] DML Start [2025-09-24 02:08:04.249] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:08:04.505] DML res1: 0 [2025-09-24 02:08:04.982] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:08:04.982] Read Success [2025-09-24 02:08:04.982] Verifying certificate... [2025-09-24 02:08:05.238] Verified OK [2025-09-24 02:08:05.254] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:08:06.949] Verified OK [2025-09-24 02:08:06.949] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:08:07.564] Verified OK [2025-09-24 02:08:07.564] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:08:10.154] fs.protected_hardlinks = 1 [2025-09-24 02:08:10.154] fs.protected_symlinks = 1 [2025-09-24 02:08:10.170] kernel.modules_disabled = 1 [2025-09-24 02:08:10.363] [2025-09-24 02:08:10.363] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:08:11.590] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:08:19.427] SBL1:1210.0.1.0 [2025-09-24 02:08:19.475] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:08:21.041] SBL2:1210.0.1.0 [2025-09-24 02:08:21.073] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:08:21.185] j-A [2025-09-24 02:08:28.539] The R5 Autosar Classic is running [2025-09-24 02:08:28.539] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:08:28.560] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:08:29.167] INIT: version 2.96 booting [2025-09-24 02:08:29.279] INIT: Entering runlevel: 5 [2025-09-24 02:08:29.423] mtd24 attached [2025-09-24 02:08:29.439] mtd28 attached [2025-09-24 02:08:29.455] mtd32 attached [2025-09-24 02:08:29.503] ubi0:textures is mounted. [2025-09-24 02:08:29.503] RTNETLINK answers: File exists [2025-09-24 02:08:29.542] ubi1:animations is mounted. [2025-09-24 02:08:29.542] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:08:29.542] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:08:29.542] ubi2:dml_code is mounted. [2025-09-24 02:08:29.542] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:08:29.542] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:08:29.542] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:08:29.565] data.LB_FadeInType0=100 [2025-09-24 02:08:29.565] data.CHLH_FadeInType0=0 [2025-09-24 02:08:29.565] data.WU_FadeInDelay=0 [2025-09-24 02:08:29.565] max_time_out=0 [2025-09-24 02:08:29.565] No splash screen [2025-09-24 02:08:29.565] stop dss Done [2025-09-24 02:08:29.609] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:08:29.609] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:08:29.642] /dev/mem opened. [2025-09-24 02:08:29.642] Memory mapped at address 0xffff92ffa000. [2025-09-24 02:08:29.642] Read at address 0x00600018 (0xffff92ffa018): 0x00000000 [2025-09-24 02:08:29.642] Write at address 0x00600018 (0xffff92ffa018): 0x00400040, readback 0x00400040 [2025-09-24 02:08:29.867] Loaded PowerVR consumer services. [2025-09-24 02:08:29.909] 512+0 records in [2025-09-24 02:08:29.909] 512+0 records out [2025-09-24 02:08:29.909] Waiting data available... [2025-09-24 02:08:29.940] Starting syslogd/klogd: done [2025-09-24 02:08:29.957] DML Start [2025-09-24 02:08:30.133] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:08:30.372] DML res1: 0 [2025-09-24 02:08:30.828] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:08:30.828] Read Success [2025-09-24 02:08:30.828] Verifying certificate... [2025-09-24 02:08:31.100] Verified OK [2025-09-24 02:08:31.100] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:08:32.779] Verified OK [2025-09-24 02:08:32.779] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:08:33.435] Verified OK [2025-09-24 02:08:33.435] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:08:36.057] fs.protected_hardlinks = 1 [2025-09-24 02:08:36.057] fs.protected_symlinks = 1 [2025-09-24 02:08:36.073] kernel.modules_disabled = 1 [2025-09-24 02:08:36.265] [2025-09-24 02:08:36.265] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:08:37.416] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:08:45.259] SBL1:1210.0.1.0 [2025-09-24 02:08:45.291] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:08:46.873] SBL2:1210.0.1.0 [2025-09-24 02:08:46.906] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:08:47.018] j-A [2025-09-24 02:08:54.388] The R5 Autosar Classic is running [2025-09-24 02:08:54.388] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:08:54.388] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:08:54.996] INIT: version 2.96 booting [2025-09-24 02:08:55.108] INIT: Entering runlevel: 5 [2025-09-24 02:08:55.252] mtd24 attached [2025-09-24 02:08:55.268] mtd28 attached [2025-09-24 02:08:55.268] mtd32 attached [2025-09-24 02:08:55.316] RTNETLINK answers: File exists [2025-09-24 02:08:55.332] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:08:55.368] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:08:55.368] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:08:55.368] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:08:55.368] ubi2:dml_code is mounted. [2025-09-24 02:08:55.368] ubi0:textures is mounted. [2025-09-24 02:08:55.368] ubi1:animations is mounted. [2025-09-24 02:08:55.368] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:08:55.384] data.LB_FadeInType0=100 [2025-09-24 02:08:55.384] data.CHLH_FadeInType0=0 [2025-09-24 02:08:55.405] data.WU_FadeInDelay=0 [2025-09-24 02:08:55.405] max_time_out=0 [2025-09-24 02:08:55.405] No splash screen [2025-09-24 02:08:55.405] stop dss Done [2025-09-24 02:08:55.434] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:08:55.434] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:08:55.474] /dev/mem opened. [2025-09-24 02:08:55.474] Memory mapped at address 0xffffac5d3000. [2025-09-24 02:08:55.474] Read at address 0x00600018 (0xffffac5d3018): 0x00000000 [2025-09-24 02:08:55.474] Write at address 0x00600018 (0xffffac5d3018): 0x00400040, readback 0x00400040 [2025-09-24 02:08:55.650] Loaded PowerVR consumer services. [2025-09-24 02:08:55.743] Waiting data available... [2025-09-24 02:08:55.743] 512+0 records in [2025-09-24 02:08:55.743] 512+0 records out [2025-09-24 02:08:55.759] Starting syslogd/klogd: done [2025-09-24 02:08:55.775] DML Start [2025-09-24 02:08:55.951] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:08:56.143] DML res1: 0 [2025-09-24 02:08:56.664] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:08:56.664] Read Success [2025-09-24 02:08:56.664] Verifying certificate... [2025-09-24 02:08:57.000] Verified OK [2025-09-24 02:08:57.032] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:08:58.772] Verified OK [2025-09-24 02:08:58.772] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:08:59.331] Verified OK [2025-09-24 02:08:59.352] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:09:01.846] fs.protected_hardlinks = 1 [2025-09-24 02:09:01.862] fs.protected_symlinks = 1 [2025-09-24 02:09:01.862] kernel.modules_disabled = 1 [2025-09-24 02:09:02.070] [2025-09-24 02:09:02.070] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:09:03.214] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:09:11.076] SBL1:1210.0.1.0 [2025-09-24 02:09:11.124] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:09:12.691] SBL2:1210.0.1.0 [2025-09-24 02:09:12.739] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:09:12.836] j-A [2025-09-24 02:09:20.190] The R5 Autosar Classic is running [2025-09-24 02:09:20.212] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:09:20.212] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:09:20.819] INIT: version 2.96 booting [2025-09-24 02:09:20.931] INIT: Entering runlevel: 5 [2025-09-24 02:09:21.091] mtd24 attached [2025-09-24 02:09:21.107] mtd32 attached [2025-09-24 02:09:21.123] mtd28 attached [2025-09-24 02:09:21.123] ubi0:textures is mounted. [2025-09-24 02:09:21.199] RTNETLINK answers: File exists [2025-09-24 02:09:21.199] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:09:21.199] ubi1:dml_code is mounted. [2025-09-24 02:09:21.199] ubi2:animations is mounted. [2025-09-24 02:09:21.199] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:09:21.199] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:09:21.199] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:09:21.226] data.LB_FadeInType0=100 [2025-09-24 02:09:21.226] data.CHLH_FadeInType0=0 [2025-09-24 02:09:21.226] data.WU_FadeInDelay=0 [2025-09-24 02:09:21.226] max_time_out=0 [2025-09-24 02:09:21.226] No splash screen [2025-09-24 02:09:21.226] stop dss Done [2025-09-24 02:09:21.226] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:09:21.300] /dev/mem opened. [2025-09-24 02:09:21.300] Memory mapped at address 0xffff8f34a000. [2025-09-24 02:09:21.300] Read at address 0x00600018 (0xffff8f34a018): 0x00000000 [2025-09-24 02:09:21.300] Write at address 0x00600018 (0xffff8f34a018): 0x00400040, readback 0x00400040 [2025-09-24 02:09:21.348] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:09:21.364] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:09:21.444] Loaded PowerVR consumer services. [2025-09-24 02:09:21.555] Waiting data available... [2025-09-24 02:09:21.571] 512+0 records in [2025-09-24 02:09:21.571] 512+0 records out [2025-09-24 02:09:21.587] Starting syslogd/klogd: done [2025-09-24 02:09:21.619] DML Start [2025-09-24 02:09:21.795] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:09:22.004] DML res1: 0 [2025-09-24 02:09:22.482] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:09:22.482] Read Success [2025-09-24 02:09:22.482] Verifying certificate... [2025-09-24 02:09:22.722] Verified OK [2025-09-24 02:09:22.738] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:09:24.574] Verified OK [2025-09-24 02:09:24.574] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:09:25.075] Verified OK [2025-09-24 02:09:25.075] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:09:27.566] fs.protected_hardlinks = 1 [2025-09-24 02:09:27.566] fs.protected_symlinks = 1 [2025-09-24 02:09:27.566] kernel.modules_disabled = 1 [2025-09-24 02:09:27.741] [2025-09-24 02:09:27.741] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:09:29.116] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:09:36.902] SBL1:1210.0.1.0 [2025-09-24 02:09:36.934] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:09:38.517] SBL2:1210.0.1.0 [2025-09-24 02:09:38.549] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:09:38.661] j-A [2025-09-24 02:09:46.035] The R5 Autosar Classic is running [2025-09-24 02:09:46.035] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:09:46.035] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:09:46.643] INIT: version 2.96 booting [2025-09-24 02:09:46.754] INIT: Entering runlevel: 5 [2025-09-24 02:09:46.899] mtd32 attached [2025-09-24 02:09:46.915] mtd28 attached [2025-09-24 02:09:46.915] mtd24 attached [2025-09-24 02:09:46.978] ubi2:textures is mounted. [2025-09-24 02:09:46.978] RTNETLINK answers: File exists [2025-09-24 02:09:47.036] ubi1:animations is mounted. [2025-09-24 02:09:47.036] ubi0:dml_code is mounted. [2025-09-24 02:09:47.036] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:09:47.036] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:09:47.036] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:09:47.036] data.LB_FadeInType0=100 [2025-09-24 02:09:47.036] data.CHLH_FadeInType0=0 [2025-09-24 02:09:47.036] data.WU_FadeInDelay=0 [2025-09-24 02:09:47.036] max_time_out=0 [2025-09-24 02:09:47.036] No splash screen [2025-09-24 02:09:47.036] stop dss Done [2025-09-24 02:09:47.036] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:09:47.036] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:09:47.084] /dev/mem opened. [2025-09-24 02:09:47.084] Memory mapped at address 0xffff89e8d000. [2025-09-24 02:09:47.110] Read at address 0x00600018 (0xffff89e8d018): 0x00000000 [2025-09-24 02:09:47.110] Write at address 0x00600018 (0xffff89e8d018): 0x00400040, readback 0x00400040 [2025-09-24 02:09:47.158] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:09:47.174] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:09:47.238] Loaded PowerVR consumer services. [2025-09-24 02:09:47.366] Waiting data available... [2025-09-24 02:09:47.382] 512+0 records in [2025-09-24 02:09:47.382] 512+0 records out [2025-09-24 02:09:47.430] Starting syslogd/klogd: done [2025-09-24 02:09:47.446] DML Start [2025-09-24 02:09:47.590] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:09:47.829] DML res1: 0 [2025-09-24 02:09:48.266] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:09:48.266] Read Success [2025-09-24 02:09:48.266] Verifying certificate... [2025-09-24 02:09:48.538] Verified OK [2025-09-24 02:09:48.554] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:09:50.230] Verified OK [2025-09-24 02:09:50.230] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:09:50.866] Verified OK [2025-09-24 02:09:50.866] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:09:53.489] fs.protected_hardlinks = 1 [2025-09-24 02:09:53.489] fs.protected_symlinks = 1 [2025-09-24 02:09:53.504] kernel.modules_disabled = 1 [2025-09-24 02:09:53.713] [2025-09-24 02:09:53.713] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:09:54.943] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:10:02.750] SBL1:1210.0.1.0 [2025-09-24 02:10:02.781] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:10:04.365] SBL2:1210.0.1.0 [2025-09-24 02:10:04.396] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:10:04.508] j-A [2025-09-24 02:10:11.849] The R5 Autosar Classic is running [2025-09-24 02:10:11.880] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:10:11.880] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:10:12.487] INIT: version 2.96 booting [2025-09-24 02:10:12.583] INIT: Entering runlevel: 5 [2025-09-24 02:10:12.743] mtd28 attached [2025-09-24 02:10:12.759] mtd24 attached [2025-09-24 02:10:12.775] mtd32 attached [2025-09-24 02:10:12.791] ubi0:animations is mounted. [2025-09-24 02:10:12.807] ubi1:textures is mounted. [2025-09-24 02:10:12.823] ubi2:dml_code is mounted. [2025-09-24 02:10:12.823] RTNETLINK answers: File exists [2025-09-24 02:10:12.839] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:10:12.886] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:10:12.887] data.LB_FadeInType0=100 [2025-09-24 02:10:12.887] data.CHLH_FadeInType0=0 [2025-09-24 02:10:12.887] data.WU_FadeInDelay=0 [2025-09-24 02:10:12.887] max_time_out=0 [2025-09-24 02:10:12.887] No splash screen [2025-09-24 02:10:12.887] stop dss Done [2025-09-24 02:10:12.887] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:10:12.887] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:10:12.887] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:10:12.945] /dev/mem opened. [2025-09-24 02:10:12.945] Memory mapped at address 0xffffa9f94000. [2025-09-24 02:10:12.945] Read at address 0x00600018 (0xffffa9f94018): 0x00000000 [2025-09-24 02:10:12.945] Write at address 0x00600018 (0xffffa9f94018): 0x00400040, readback 0x00400040 [2025-09-24 02:10:13.025] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:10:13.041] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:10:13.169] Loaded PowerVR consumer services. [2025-09-24 02:10:13.243] Waiting data available... [2025-09-24 02:10:13.243] 512+0 records in [2025-09-24 02:10:13.243] 512+0 records out [2025-09-24 02:10:13.276] Starting syslogd/klogd: done [2025-09-24 02:10:13.292] DML Start [2025-09-24 02:10:13.467] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:10:13.675] DML res1: 0 [2025-09-24 02:10:14.182] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:10:14.182] Read Success [2025-09-24 02:10:14.182] Verifying certificate... [2025-09-24 02:10:14.438] Verified OK [2025-09-24 02:10:14.454] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:10:16.160] Verified OK [2025-09-24 02:10:16.160] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:10:16.696] Verified OK [2025-09-24 02:10:16.696] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:10:19.301] fs.protected_hardlinks = 1 [2025-09-24 02:10:19.301] fs.protected_symlinks = 1 [2025-09-24 02:10:19.317] kernel.modules_disabled = 1 [2025-09-24 02:10:19.509] [2025-09-24 02:10:19.509] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:10:20.731] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:10:28.543] SBL1:1210.0.1.0 [2025-09-24 02:10:28.591] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:10:30.173] SBL2:1210.0.1.0 [2025-09-24 02:10:30.205] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:10:30.318] j-A [2025-09-24 02:10:37.657] The R5 Autosar Classic is running [2025-09-24 02:10:37.682] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:10:37.682] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:10:38.289] INIT: version 2.96 booting [2025-09-24 02:10:38.402] INIT: Entering runlevel: 5 [2025-09-24 02:10:38.561] mtd24 attached [2025-09-24 02:10:38.561] mtd28 attached [2025-09-24 02:10:38.577] mtd32 attached [2025-09-24 02:10:38.625] ubi0:textures is mounted. [2025-09-24 02:10:38.625] RTNETLINK answers: File exists [2025-09-24 02:10:38.672] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:10:38.672] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:10:38.672] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:10:38.672] ubi1:animations is mounted. [2025-09-24 02:10:38.672] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:10:38.672] ubi2:dml_code is mounted. [2025-09-24 02:10:38.672] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:10:38.695] data.LB_FadeInType0=100 [2025-09-24 02:10:38.695] data.CHLH_FadeInType0=0 [2025-09-24 02:10:38.695] data.WU_FadeInDelay=0 [2025-09-24 02:10:38.695] max_time_out=0 [2025-09-24 02:10:38.695] No splash screen [2025-09-24 02:10:38.695] stop dss Done [2025-09-24 02:10:38.735] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:10:38.735] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:10:38.769] /dev/mem opened. [2025-09-24 02:10:38.769] Memory mapped at address 0xffffbbe0d000. [2025-09-24 02:10:38.769] Read at address 0x00600018 (0xffffbbe0d018): 0x00000000 [2025-09-24 02:10:38.769] Write at address 0x00600018 (0xffffbbe0d018): 0x00400040, readback 0x00400040 [2025-09-24 02:10:38.961] Loaded PowerVR consumer services. [2025-09-24 02:10:39.025] Waiting data available... [2025-09-24 02:10:39.056] 512+0 records in [2025-09-24 02:10:39.056] 512+0 records out [2025-09-24 02:10:39.072] Starting syslogd/klogd: done [2025-09-24 02:10:39.088] DML Start [2025-09-24 02:10:39.280] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:10:39.471] DML res1: 0 [2025-09-24 02:10:39.913] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:10:39.913] Read Success [2025-09-24 02:10:39.913] Verifying certificate... [2025-09-24 02:10:40.136] Verified OK [2025-09-24 02:10:40.152] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:10:41.749] Verified OK [2025-09-24 02:10:41.749] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:10:42.418] Verified OK [2025-09-24 02:10:42.418] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:10:45.073] fs.protected_hardlinks = 1 [2025-09-24 02:10:45.073] fs.protected_symlinks = 1 [2025-09-24 02:10:45.088] kernel.modules_disabled = 1 [2025-09-24 02:10:45.280] [2025-09-24 02:10:45.280] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:10:46.577] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:10:54.371] SBL1:1210.0.1.0 [2025-09-24 02:10:54.419] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:10:55.985] SBL2:1210.0.1.0 [2025-09-24 02:10:56.034] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:10:56.130] j-A [2025-09-24 02:11:03.485] The R5 Autosar Classic is running [2025-09-24 02:11:03.509] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:11:03.509] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:11:04.116] INIT: version 2.96 booting [2025-09-24 02:11:04.229] INIT: Entering runlevel: 5 [2025-09-24 02:11:04.389] mtd24 attached [2025-09-24 02:11:04.389] mtd28 attached [2025-09-24 02:11:04.421] mtd32 attached [2025-09-24 02:11:04.437] ubi0:textures is mounted. [2025-09-24 02:11:04.453] ubi1:animations is mounted. [2025-09-24 02:11:04.515] RTNETLINK answers: File exists [2025-09-24 02:11:04.515] ubi2:dml_code is mounted. [2025-09-24 02:11:04.515] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:11:04.515] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:11:04.515] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:11:04.515] data.LB_FadeInType0=100 [2025-09-24 02:11:04.515] data.CHLH_FadeInType0=0 [2025-09-24 02:11:04.515] data.WU_FadeInDelay=0 [2025-09-24 02:11:04.515] max_time_out=0 [2025-09-24 02:11:04.515] No splash screen [2025-09-24 02:11:04.515] stop dss Done [2025-09-24 02:11:04.515] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:11:04.515] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:11:04.563] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:11:04.597] /dev/mem opened. [2025-09-24 02:11:04.597] Memory mapped at address 0xffffab180000. [2025-09-24 02:11:04.597] Read at address 0x00600018 (0xffffab180018): 0x00000000 [2025-09-24 02:11:04.597] Write at address 0x00600018 (0xffffab180018): 0x00400040, readback 0x00400040 [2025-09-24 02:11:04.597] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:11:04.677] Loaded PowerVR consumer services. [2025-09-24 02:11:04.846] Waiting data available... [2025-09-24 02:11:04.846] 512+0 records in [2025-09-24 02:11:04.846] 512+0 records out [2025-09-24 02:11:04.862] Starting syslogd/klogd: done [2025-09-24 02:11:04.878] DML Start [2025-09-24 02:11:05.070] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:11:05.262] DML res1: 0 [2025-09-24 02:11:05.694] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:11:05.716] Read Success [2025-09-24 02:11:05.716] Verifying certificate... [2025-09-24 02:11:05.939] Verified OK [2025-09-24 02:11:05.955] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:11:07.580] Verified OK [2025-09-24 02:11:07.580] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:11:08.151] Verified OK [2025-09-24 02:11:08.151] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:11:10.805] fs.protected_hardlinks = 1 [2025-09-24 02:11:10.805] fs.protected_symlinks = 1 [2025-09-24 02:11:10.805] kernel.modules_disabled = 1 [2025-09-24 02:11:10.997] [2025-09-24 02:11:10.997] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:11:12.331] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:11:20.191] SBL1:1210.0.1.0 [2025-09-24 02:11:20.239] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:11:21.806] SBL2:1210.0.1.0 [2025-09-24 02:11:21.853] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:11:21.966] j-A [2025-09-24 02:11:29.305] The R5 Autosar Classic is running [2025-09-24 02:11:29.330] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:11:29.330] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:11:29.938] INIT: version 2.96 booting [2025-09-24 02:11:30.050] INIT: Entering runlevel: 5 [2025-09-24 02:11:30.193] mtd24 attached [2025-09-24 02:11:30.209] mtd28 attached [2025-09-24 02:11:30.225] mtd32 attached [2025-09-24 02:11:30.328] ubi1:animations is mounted. [2025-09-24 02:11:30.328] RTNETLINK answers: File exists [2025-09-24 02:11:30.328] ubi0:textures is mounted. [2025-09-24 02:11:30.328] ubi2:dml_code is mounted. [2025-09-24 02:11:30.328] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:11:30.328] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:11:30.328] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:11:30.328] data.LB_FadeInType0=100 [2025-09-24 02:11:30.328] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:11:30.328] data.CHLH_FadeInType0=0 [2025-09-24 02:11:30.328] data.WU_FadeInDelay=0 [2025-09-24 02:11:30.328] max_time_out=0 [2025-09-24 02:11:30.328] No splash screen [2025-09-24 02:11:30.328] stop dss Done [2025-09-24 02:11:30.328] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:11:30.392] /dev/mem opened. [2025-09-24 02:11:30.392] Memory mapped at address 0xffff9d5cc000. [2025-09-24 02:11:30.392] Read at address 0x00600018 (0xffff9d5cc018): 0x00000000 [2025-09-24 02:11:30.392] Write at address 0x00600018 (0xffff9d5cc018): 0x00400040, readback 0x00400040 [2025-09-24 02:11:30.392] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:11:30.408] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:11:30.504] Loaded PowerVR consumer services. [2025-09-24 02:11:30.662] 512+0 records in [2025-09-24 02:11:30.662] 512+0 records out [2025-09-24 02:11:30.662] Waiting data available... [2025-09-24 02:11:30.678] Starting syslogd/klogd: done [2025-09-24 02:11:30.694] DML Start [2025-09-24 02:11:30.886] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:11:31.094] DML res1: 0 [2025-09-24 02:11:31.557] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:11:31.579] Read Success [2025-09-24 02:11:31.579] Verifying certificate... [2025-09-24 02:11:31.834] Verified OK [2025-09-24 02:11:31.850] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:11:33.600] Verified OK [2025-09-24 02:11:33.600] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:11:34.135] Verified OK [2025-09-24 02:11:34.135] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:11:36.598] fs.protected_hardlinks = 1 [2025-09-24 02:11:36.598] fs.protected_symlinks = 1 [2025-09-24 02:11:36.614] kernel.modules_disabled = 1 [2025-09-24 02:11:36.806] [2025-09-24 02:11:36.806] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:11:38.176] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:11:46.031] SBL1:1210.0.1.0 [2025-09-24 02:11:46.063] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:11:47.646] SBL2:1210.0.1.0 [2025-09-24 02:11:47.678] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:11:47.790] j-A [2025-09-24 02:11:55.128] The R5 Autosar Classic is running [2025-09-24 02:11:55.159] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:11:55.159] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:11:55.767] INIT: version 2.96 booting [2025-09-24 02:11:55.878] INIT: Entering runlevel: 5 [2025-09-24 02:11:56.023] mtd24 attached [2025-09-24 02:11:56.039] mtd28 attached [2025-09-24 02:11:56.055] mtd32 attached [2025-09-24 02:11:56.159] ubi0:textures is mounted. [2025-09-24 02:11:56.159] RTNETLINK answers: File exists [2025-09-24 02:11:56.159] ubi1:animations is mounted. [2025-09-24 02:11:56.159] ubi2:dml_code is mounted. [2025-09-24 02:11:56.159] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:11:56.159] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:11:56.159] data.LB_FadeInType0=100 [2025-09-24 02:11:56.159] data.CHLH_FadeInType0=0 [2025-09-24 02:11:56.159] data.WU_FadeInDelay=0 [2025-09-24 02:11:56.159] max_time_out=0 [2025-09-24 02:11:56.159] No splash screen [2025-09-24 02:11:56.159] stop dss Done [2025-09-24 02:11:56.159] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:11:56.159] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:11:56.159] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:11:56.208] /dev/mem opened. [2025-09-24 02:11:56.240] Memory mapped at address 0xffffbb647000. [2025-09-24 02:11:56.240] Read at address 0x00600018 (0xffffbb647018): 0x00000000 [2025-09-24 02:11:56.240] Write at address 0x00600018 (0xffffbb647018): 0x00400040, readback 0x00400040 [2025-09-24 02:11:56.240] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:11:56.240] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:11:56.320] Loaded PowerVR consumer services. [2025-09-24 02:11:56.480] Waiting data available... [2025-09-24 02:11:56.495] 512+0 records in [2025-09-24 02:11:56.495] 512+0 records out [2025-09-24 02:11:56.543] Starting syslogd/klogd: done [2025-09-24 02:11:56.559] DML Start [2025-09-24 02:11:56.751] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:11:56.959] DML res1: 0 [2025-09-24 02:11:57.374] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:11:57.374] Read Success [2025-09-24 02:11:57.374] Verifying certificate... [2025-09-24 02:11:57.630] Verified OK [2025-09-24 02:11:57.662] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:11:59.209] Verified OK [2025-09-24 02:11:59.209] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:11:59.784] Verified OK [2025-09-24 02:11:59.784] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:12:02.582] fs.protected_hardlinks = 1 [2025-09-24 02:12:02.582] fs.protected_symlinks = 1 [2025-09-24 02:12:02.598] kernel.modules_disabled = 1 [2025-09-24 02:12:02.790] [2025-09-24 02:12:02.790] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:12:04.055] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:12:11.859] SBL1:1210.0.1.0 [2025-09-24 02:12:11.891] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:12:13.474] SBL2:1210.0.1.0 [2025-09-24 02:12:13.506] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:12:13.618] j-A [2025-09-24 02:12:20.990] The R5 Autosar Classic is running [2025-09-24 02:12:20.990] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:12:20.990] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:12:21.598] INIT: version 2.96 booting [2025-09-24 02:12:21.710] INIT: Entering runlevel: 5 [2025-09-24 02:12:21.854] mtd24 attached [2025-09-24 02:12:21.870] mtd28 attached [2025-09-24 02:12:21.886] mtd32 attached [2025-09-24 02:12:21.901] ubi0:textures is mounted. [2025-09-24 02:12:21.933] RTNETLINK answers: File exists [2025-09-24 02:12:21.933] ubi1:animations is mounted. [2025-09-24 02:12:21.970] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:12:21.970] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:12:21.970] ubi2:dml_code is mounted. [2025-09-24 02:12:21.970] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:12:21.970] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:12:21.970] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:12:21.991] data.LB_FadeInType0=100 [2025-09-24 02:12:21.991] data.CHLH_FadeInType0=0 [2025-09-24 02:12:21.991] data.WU_FadeInDelay=0 [2025-09-24 02:12:21.991] max_time_out=0 [2025-09-24 02:12:21.991] No splash screen [2025-09-24 02:12:21.991] stop dss Done [2025-09-24 02:12:22.039] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:12:22.079] /dev/mem opened. [2025-09-24 02:12:22.079] Memory mapped at address 0xffffb6929000. [2025-09-24 02:12:22.079] Read at address 0x00600018 (0xffffb6929018): 0x00000000 [2025-09-24 02:12:22.079] Write at address 0x00600018 (0xffffb6929018): 0x00400040, readback 0x00400040 [2025-09-24 02:12:22.079] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:12:22.175] Loaded PowerVR consumer services. [2025-09-24 02:12:22.303] 512+0 records in [2025-09-24 02:12:22.303] 512+0 records out [2025-09-24 02:12:22.319] Waiting data available... [2025-09-24 02:12:22.351] Starting syslogd/klogd: done [2025-09-24 02:12:22.367] DML Start [2025-09-24 02:12:22.559] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:12:22.783] DML res1: 0 [2025-09-24 02:12:23.191] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:12:23.191] Read Success [2025-09-24 02:12:23.191] Verifying certificate... [2025-09-24 02:12:23.414] Verified OK [2025-09-24 02:12:23.430] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:12:25.056] Verified OK [2025-09-24 02:12:25.056] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:12:25.616] Verified OK [2025-09-24 02:12:25.616] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:12:28.430] fs.protected_hardlinks = 1 [2025-09-24 02:12:28.430] fs.protected_symlinks = 1 [2025-09-24 02:12:28.446] kernel.modules_disabled = 1 [2025-09-24 02:12:28.638] [2025-09-24 02:12:28.638] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:12:29.843] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:12:37.684] SBL1:1210.0.1.0 [2025-09-24 02:12:37.715] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:12:39.299] SBL2:1210.0.1.0 [2025-09-24 02:12:39.331] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:12:39.443] j-A [2025-09-24 02:12:46.796] The R5 Autosar Classic is running [2025-09-24 02:12:46.796] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:12:46.817] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:12:47.425] INIT: version 2.96 booting [2025-09-24 02:12:47.536] INIT: Entering runlevel: 5 [2025-09-24 02:12:47.697] mtd24 attached [2025-09-24 02:12:47.697] mtd28 attached [2025-09-24 02:12:47.713] mtd32 attached [2025-09-24 02:12:47.761] ubi0:textures is mounted. [2025-09-24 02:12:47.802] RTNETLINK answers: File exists [2025-09-24 02:12:47.802] ubi2:dml_code is mounted. [2025-09-24 02:12:47.802] ubi1:animations is mounted. [2025-09-24 02:12:47.802] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:12:47.802] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:12:47.802] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:12:47.802] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:12:47.802] data.LB_FadeInType0=100 [2025-09-24 02:12:47.827] data.CHLH_FadeInType0=0 [2025-09-24 02:12:47.827] data.WU_FadeInDelay=0 [2025-09-24 02:12:47.827] max_time_out=0 [2025-09-24 02:12:47.827] No splash screen [2025-09-24 02:12:47.827] stop dss Done [2025-09-24 02:12:47.827] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:12:47.913] /dev/mem opened. [2025-09-24 02:12:47.913] Memory mapped at address 0xffff985cd000. [2025-09-24 02:12:47.913] Read at address 0x00600018 (0xffff985cd018): 0x00000000 [2025-09-24 02:12:47.913] Write at address 0x00600018 (0xffff985cd018): 0x00400040, readback 0x00400040 [2025-09-24 02:12:47.913] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:12:47.913] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:12:48.105] Loaded PowerVR consumer services. [2025-09-24 02:12:48.153] Waiting data available... [2025-09-24 02:12:48.169] 512+0 records in [2025-09-24 02:12:48.169] 512+0 records out [2025-09-24 02:12:48.201] Starting syslogd/klogd: done [2025-09-24 02:12:48.217] DML Start [2025-09-24 02:12:48.408] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:12:48.633] DML res1: 0 [2025-09-24 02:12:49.048] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:12:49.074] Read Success [2025-09-24 02:12:49.074] Verifying certificate... [2025-09-24 02:12:49.362] Verified OK [2025-09-24 02:12:49.378] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:12:51.095] Verified OK [2025-09-24 02:12:51.095] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:12:51.697] Verified OK [2025-09-24 02:12:51.697] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:12:54.208] fs.protected_hardlinks = 1 [2025-09-24 02:12:54.208] fs.protected_symlinks = 1 [2025-09-24 02:12:54.224] kernel.modules_disabled = 1 [2025-09-24 02:12:54.416] [2025-09-24 02:12:54.416] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:12:55.657] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:13:03.515] SBL1:1210.0.1.0 [2025-09-24 02:13:03.563] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:13:05.130] SBL2:1210.0.1.0 [2025-09-24 02:13:05.162] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:13:05.274] j-A [2025-09-24 02:13:12.628] The R5 Autosar Classic is running [2025-09-24 02:13:12.628] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:13:12.649] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:13:13.257] INIT: version 2.96 booting [2025-09-24 02:13:13.368] INIT: Entering runlevel: 5 [2025-09-24 02:13:13.528] mtd24 attached [2025-09-24 02:13:13.528] mtd28 attached [2025-09-24 02:13:13.545] mtd32 attached [2025-09-24 02:13:13.592] RTNETLINK answers: File exists [2025-09-24 02:13:13.660] ubi0:textures is mounted. [2025-09-24 02:13:13.660] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:13:13.660] ubi1:animations is mounted. [2025-09-24 02:13:13.660] ubi2:dml_code is mounted. [2025-09-24 02:13:13.660] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:13:13.660] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:13:13.660] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:13:13.660] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:13:13.660] data.LB_FadeInType0=100 [2025-09-24 02:13:13.660] data.CHLH_FadeInType0=0 [2025-09-24 02:13:13.660] data.WU_FadeInDelay=0 [2025-09-24 02:13:13.660] max_time_out=0 [2025-09-24 02:13:13.660] No splash screen [2025-09-24 02:13:13.660] stop dss Done [2025-09-24 02:13:13.708] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:13:13.740] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:13:13.740] /dev/mem opened. [2025-09-24 02:13:13.740] Memory mapped at address 0xffffab41f000. [2025-09-24 02:13:13.740] Read at address 0x00600018 (0xffffab41f018): 0x00000000 [2025-09-24 02:13:13.740] Write at address 0x00600018 (0xffffab41f018): 0x00400040, readback 0x00400040 [2025-09-24 02:13:13.868] Loaded PowerVR consumer services. [2025-09-24 02:13:14.002] 512+0 records in [2025-09-24 02:13:14.002] 512+0 records out [2025-09-24 02:13:14.002] Waiting data available... [2025-09-24 02:13:14.034] Starting syslogd/klogd: done [2025-09-24 02:13:14.050] DML Start [2025-09-24 02:13:14.226] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:13:14.450] DML res1: 0 [2025-09-24 02:13:14.919] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:13:14.919] Read Success [2025-09-24 02:13:14.919] Verifying certificate... [2025-09-24 02:13:15.143] Verified OK [2025-09-24 02:13:15.159] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:13:16.755] Verified OK [2025-09-24 02:13:16.756] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:13:17.357] Verified OK [2025-09-24 02:13:17.357] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:13:20.091] fs.protected_hardlinks = 1 [2025-09-24 02:13:20.091] fs.protected_symlinks = 1 [2025-09-24 02:13:20.107] kernel.modules_disabled = 1 [2025-09-24 02:13:20.299] [2025-09-24 02:13:20.299] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:13:21.526] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:13:29.340] SBL1:1210.0.1.0 [2025-09-24 02:13:29.388] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:13:30.956] SBL2:1210.0.1.0 [2025-09-24 02:13:30.987] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:13:31.099] j-A [2025-09-24 02:13:38.475] The R5 Autosar Classic is running [2025-09-24 02:13:38.475] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:13:38.475] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:13:39.082] INIT: version 2.96 booting [2025-09-24 02:13:39.194] INIT: Entering runlevel: 5 [2025-09-24 02:13:39.338] mtd28 attached [2025-09-24 02:13:39.354] mtd32 attached [2025-09-24 02:13:39.370] mtd24 attached [2025-09-24 02:13:39.386] ubi0:animations is mounted. [2025-09-24 02:13:39.402] RTNETLINK answers: File exists [2025-09-24 02:13:39.452] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:13:39.452] ubi2:textures is mounted. [2025-09-24 02:13:39.452] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:13:39.452] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:13:39.452] ubi1:dml_code is mounted. [2025-09-24 02:13:39.452] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:13:39.452] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:13:39.477] data.LB_FadeInType0=100 [2025-09-24 02:13:39.477] data.CHLH_FadeInType0=0 [2025-09-24 02:13:39.477] data.WU_FadeInDelay=0 [2025-09-24 02:13:39.477] max_time_out=0 [2025-09-24 02:13:39.477] No splash screen [2025-09-24 02:13:39.477] stop dss Done [2025-09-24 02:13:39.493] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:13:39.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:13:39.525] /dev/mem opened. [2025-09-24 02:13:39.525] Memory mapped at address 0xffffbb721000. [2025-09-24 02:13:39.551] Read at address 0x00600018 (0xffffbb721018): 0x00000000 [2025-09-24 02:13:39.551] Write at address 0x00600018 (0xffffbb721018): 0x00400040, readback 0x00400040 [2025-09-24 02:13:39.774] Loaded PowerVR consumer services. [2025-09-24 02:13:39.833] 512+0 records in [2025-09-24 02:13:39.833] 512+0 records out [2025-09-24 02:13:39.833] Waiting data available... [2025-09-24 02:13:39.850] Starting syslogd/klogd: done [2025-09-24 02:13:39.882] DML Start [2025-09-24 02:13:40.058] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:13:40.265] DML res1: 0 [2025-09-24 02:13:40.740] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:13:40.740] Read Success [2025-09-24 02:13:40.740] Verifying certificate... [2025-09-24 02:13:40.995] Verified OK [2025-09-24 02:13:41.011] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:13:42.768] Verified OK [2025-09-24 02:13:42.768] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:13:43.341] Verified OK [2025-09-24 02:13:43.341] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:13:45.787] fs.protected_hardlinks = 1 [2025-09-24 02:13:45.803] fs.protected_symlinks = 1 [2025-09-24 02:13:45.803] kernel.modules_disabled = 1 [2025-09-24 02:13:45.995] [2025-09-24 02:13:45.995] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:13:47.372] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:13:55.182] SBL1:1210.0.1.0 [2025-09-24 02:13:55.230] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:13:56.796] SBL2:1210.0.1.0 [2025-09-24 02:13:56.828] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:13:56.940] j-A [2025-09-24 02:14:04.317] The R5 Autosar Classic is running [2025-09-24 02:14:04.317] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:14:04.317] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:14:04.924] INIT: version 2.96 booting [2025-09-24 02:14:05.036] INIT: Entering runlevel: 5 [2025-09-24 02:14:05.180] mtd28 attached [2025-09-24 02:14:05.196] mtd24 attached [2025-09-24 02:14:05.212] mtd32 attached [2025-09-24 02:14:05.260] RTNETLINK answers: File exists [2025-09-24 02:14:05.260] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:14:05.318] ubi2:dml_code is mounted. [2025-09-24 02:14:05.318] ubi0:animations is mounted. [2025-09-24 02:14:05.318] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:14:05.318] ubi1:textures is mounted. [2025-09-24 02:14:05.318] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:14:05.318] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:14:05.318] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:14:05.318] data.LB_FadeInType0=100 [2025-09-24 02:14:05.318] data.CHLH_FadeInType0=0 [2025-09-24 02:14:05.318] data.WU_FadeInDelay=0 [2025-09-24 02:14:05.318] max_time_out=0 [2025-09-24 02:14:05.318] No splash screen [2025-09-24 02:14:05.318] stop dss Done [2025-09-24 02:14:05.409] /dev/mem opened. [2025-09-24 02:14:05.409] Memory mapped at address 0xffff80718000. [2025-09-24 02:14:05.409] Read at address 0x00600018 (0xffff80718018): 0x00000000 [2025-09-24 02:14:05.409] Write at address 0x00600018 (0xffff80718018): 0x00400040, readback 0x00400040 [2025-09-24 02:14:05.409] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:14:05.409] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:14:05.617] Loaded PowerVR consumer services. [2025-09-24 02:14:05.676] 512+0 records in [2025-09-24 02:14:05.676] 512+0 records out [2025-09-24 02:14:05.676] Waiting data available... [2025-09-24 02:14:05.708] Starting syslogd/klogd: done [2025-09-24 02:14:05.724] DML Start [2025-09-24 02:14:05.900] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:14:06.155] DML res1: 0 [2025-09-24 02:14:06.522] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:14:06.522] Read Success [2025-09-24 02:14:06.522] Verifying certificate... [2025-09-24 02:14:06.777] Verified OK [2025-09-24 02:14:06.809] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:14:08.680] Verified OK [2025-09-24 02:14:08.680] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:14:09.232] Verified OK [2025-09-24 02:14:09.232] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:14:11.615] fs.protected_hardlinks = 1 [2025-09-24 02:14:11.615] fs.protected_symlinks = 1 [2025-09-24 02:14:11.631] kernel.modules_disabled = 1 [2025-09-24 02:14:11.822] [2025-09-24 02:14:11.822] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:14:13.245] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:14:20.991] SBL1:1210.0.1.0 [2025-09-24 02:14:21.023] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:14:22.606] SBL2:1210.0.1.0 [2025-09-24 02:14:22.638] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:14:22.750] j-A [2025-09-24 02:14:30.090] The R5 Autosar Classic is running [2025-09-24 02:14:30.121] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:14:30.121] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:14:30.728] INIT: version 2.96 booting [2025-09-24 02:14:30.839] INIT: Entering runlevel: 5 [2025-09-24 02:14:30.984] mtd24 attached [2025-09-24 02:14:31.000] mtd28 attached [2025-09-24 02:14:31.016] mtd32 attached [2025-09-24 02:14:31.032] ubi0:textures is mounted. [2025-09-24 02:14:31.063] RTNETLINK answers: File exists [2025-09-24 02:14:31.063] ubi1:animations is mounted. [2025-09-24 02:14:31.123] ubi2:dml_code is mounted. [2025-09-24 02:14:31.123] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:14:31.123] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:14:31.123] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:14:31.123] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:14:31.123] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:14:31.123] data.LB_FadeInType0=100 [2025-09-24 02:14:31.123] data.CHLH_FadeInType0=0 [2025-09-24 02:14:31.123] data.WU_FadeInDelay=0 [2025-09-24 02:14:31.123] max_time_out=0 [2025-09-24 02:14:31.123] No splash screen [2025-09-24 02:14:31.123] stop dss Done [2025-09-24 02:14:31.156] /dev/mem opened. [2025-09-24 02:14:31.156] Memory mapped at address 0xffffacb89000. [2025-09-24 02:14:31.182] Read at address 0x00600018 (0xffffacb89018): 0x00000000 [2025-09-24 02:14:31.182] Write at address 0x00600018 (0xffffacb89018): 0x00400040, readback 0x00400040 [2025-09-24 02:14:31.210] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:14:31.211] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:14:31.339] Loaded PowerVR consumer services. [2025-09-24 02:14:31.450] Waiting data available... [2025-09-24 02:14:31.466] 512+0 records in [2025-09-24 02:14:31.466] 512+0 records out [2025-09-24 02:14:31.514] Starting syslogd/klogd: done [2025-09-24 02:14:31.530] DML Start [2025-09-24 02:14:31.675] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:14:31.929] DML res1: 0 [2025-09-24 02:14:32.362] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:14:32.378] Read Success [2025-09-24 02:14:32.378] Verifying certificate... [2025-09-24 02:14:32.617] Verified OK [2025-09-24 02:14:32.633] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:14:34.361] Verified OK [2025-09-24 02:14:34.361] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:14:34.913] Verified OK [2025-09-24 02:14:34.913] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:14:37.439] fs.protected_hardlinks = 1 [2025-09-24 02:14:37.455] fs.protected_symlinks = 1 [2025-09-24 02:14:37.455] kernel.modules_disabled = 1 [2025-09-24 02:14:37.646] [2025-09-24 02:14:37.646] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:14:39.029] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:14:46.812] SBL1:1210.0.1.0 [2025-09-24 02:14:46.844] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:14:48.427] SBL2:1210.0.1.0 [2025-09-24 02:14:48.459] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:14:48.571] j-A [2025-09-24 02:14:55.946] The R5 Autosar Classic is running [2025-09-24 02:14:55.946] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:14:55.946] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:14:56.553] INIT: version 2.96 booting [2025-09-24 02:14:56.665] INIT: Entering runlevel: 5 [2025-09-24 02:14:56.825] mtd32 attached [2025-09-24 02:14:56.825] mtd24 attached [2025-09-24 02:14:56.841] mtd28 attached [2025-09-24 02:14:56.889] ubi0:dml_code is mounted. [2025-09-24 02:14:56.889] RTNETLINK answers: File exists [2025-09-24 02:14:56.955] ubi2:animations is mounted. [2025-09-24 02:14:56.955] ubi1:textures is mounted. [2025-09-24 02:14:56.955] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:14:56.955] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:14:56.955] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:14:56.955] data.LB_FadeInType0=100 [2025-09-24 02:14:56.955] data.CHLH_FadeInType0=0 [2025-09-24 02:14:56.955] data.WU_FadeInDelay=0 [2025-09-24 02:14:56.955] max_time_out=0 [2025-09-24 02:14:56.955] No splash screen [2025-09-24 02:14:56.955] stop dss Done [2025-09-24 02:14:56.955] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:14:56.955] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:14:57.033] /dev/mem opened. [2025-09-24 02:14:57.033] Memory mapped at address 0xffffadd92000. [2025-09-24 02:14:57.033] Read at address 0x00600018 (0xffffadd92018): 0x00000000 [2025-09-24 02:14:57.033] Write at address 0x00600018 (0xffffadd92018): 0x00400040, readback 0x00400040 [2025-09-24 02:14:57.033] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:14:57.033] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:14:57.209] Loaded PowerVR consumer services. [2025-09-24 02:14:57.320] Waiting data available... [2025-09-24 02:14:57.320] 512+0 records in [2025-09-24 02:14:57.320] 512+0 records out [2025-09-24 02:14:57.352] Starting syslogd/klogd: done [2025-09-24 02:14:57.384] DML Start [2025-09-24 02:14:57.543] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:14:57.768] DML res1: 0 [2025-09-24 02:14:58.178] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:14:58.178] Read Success [2025-09-24 02:14:58.178] Verifying certificate... [2025-09-24 02:14:58.451] Verified OK [2025-09-24 02:14:58.482] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:15:00.139] Verified OK [2025-09-24 02:15:00.139] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:15:00.715] Verified OK [2025-09-24 02:15:00.715] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:15:03.400] fs.protected_hardlinks = 1 [2025-09-24 02:15:03.400] fs.protected_symlinks = 1 [2025-09-24 02:15:03.416] kernel.modules_disabled = 1 [2025-09-24 02:15:03.608] [2025-09-24 02:15:03.608] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:15:04.797] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:15:12.610] SBL1:1210.0.1.0 [2025-09-24 02:15:12.659] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:15:14.226] SBL2:1210.0.1.0 [2025-09-24 02:15:14.273] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:15:14.386] j-A [2025-09-24 02:15:21.726] The R5 Autosar Classic is running [2025-09-24 02:15:21.751] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:15:21.751] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:15:22.358] INIT: version 2.96 booting [2025-09-24 02:15:22.470] INIT: Entering runlevel: 5 [2025-09-24 02:15:22.614] mtd28 attached [2025-09-24 02:15:22.630] mtd32 attached [2025-09-24 02:15:22.646] mtd24 attached [2025-09-24 02:15:22.727] RTNETLINK answers: File exists [2025-09-24 02:15:22.727] ubi0:animations is mounted. [2025-09-24 02:15:22.727] ubi2:textures is mounted. [2025-09-24 02:15:22.727] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:15:22.727] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:15:22.727] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:15:22.727] ubi1:dml_code is mounted. [2025-09-24 02:15:22.727] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:15:22.727] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:15:22.755] data.LB_FadeInType0=100 [2025-09-24 02:15:22.755] data.CHLH_FadeInType0=0 [2025-09-24 02:15:22.755] data.WU_FadeInDelay=0 [2025-09-24 02:15:22.755] max_time_out=0 [2025-09-24 02:15:22.755] No splash screen [2025-09-24 02:15:22.755] stop dss Done [2025-09-24 02:15:22.819] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:15:22.819] /dev/mem opened. [2025-09-24 02:15:22.819] Memory mapped at address 0xffffb1174000. [2025-09-24 02:15:22.819] Read at address 0x00600018 (0xffffb1174018): 0x00000000 [2025-09-24 02:15:22.819] Write at address 0x00600018 (0xffffb1174018): 0x00400040, readback 0x00400040 [2025-09-24 02:15:22.819] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:15:22.962] Loaded PowerVR consumer services. [2025-09-24 02:15:23.074] Waiting data available... [2025-09-24 02:15:23.091] 512+0 records in [2025-09-24 02:15:23.107] 512+0 records out [2025-09-24 02:15:23.138] Starting syslogd/klogd: done [2025-09-24 02:15:23.154] DML Start [2025-09-24 02:15:23.314] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:15:23.538] DML res1: 0 [2025-09-24 02:15:23.986] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:15:24.006] Read Success [2025-09-24 02:15:24.006] Verifying certificate... [2025-09-24 02:15:24.247] Verified OK [2025-09-24 02:15:24.263] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:15:25.920] Verified OK [2025-09-24 02:15:25.920] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:15:26.575] Verified OK [2025-09-24 02:15:26.591] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:15:29.197] fs.protected_hardlinks = 1 [2025-09-24 02:15:29.214] fs.protected_symlinks = 1 [2025-09-24 02:15:29.214] kernel.modules_disabled = 1 [2025-09-24 02:15:29.421] [2025-09-24 02:15:29.421] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:15:30.554] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:15:38.444] SBL1:1210.0.1.0 [2025-09-24 02:15:38.492] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:15:40.059] SBL2:1210.0.1.0 [2025-09-24 02:15:40.107] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:15:40.203] j-A [2025-09-24 02:15:47.558] The R5 Autosar Classic is running [2025-09-24 02:15:47.558] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:15:47.578] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:15:48.186] INIT: version 2.96 booting [2025-09-24 02:15:48.298] INIT: Entering runlevel: 5 [2025-09-24 02:15:48.458] mtd24 attached [2025-09-24 02:15:48.458] mtd28 attached [2025-09-24 02:15:48.474] mtd32 attached [2025-09-24 02:15:48.522] RTNETLINK answers: File exists [2025-09-24 02:15:48.590] ubi0:textures is mounted. [2025-09-24 02:15:48.590] ubi1:animations is mounted. [2025-09-24 02:15:48.590] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:15:48.590] ubi2:dml_code is mounted. [2025-09-24 02:15:48.590] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:15:48.590] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:15:48.590] data.LB_FadeInType0=100 [2025-09-24 02:15:48.590] data.CHLH_FadeInType0=0 [2025-09-24 02:15:48.590] data.WU_FadeInDelay=0 [2025-09-24 02:15:48.590] max_time_out=0 [2025-09-24 02:15:48.590] No splash screen [2025-09-24 02:15:48.590] stop dss Done [2025-09-24 02:15:48.590] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:15:48.590] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:15:48.666] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:15:48.666] /dev/mem opened. [2025-09-24 02:15:48.666] Memory mapped at address 0xffffa1d9e000. [2025-09-24 02:15:48.666] Read at address 0x00600018 (0xffffa1d9e018): 0x00000000 [2025-09-24 02:15:48.666] Write at address 0x00600018 (0xffffa1d9e018): 0x00400040, readback 0x00400040 [2025-09-24 02:15:48.666] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:15:48.794] Loaded PowerVR consumer services. [2025-09-24 02:15:48.921] Waiting data available... [2025-09-24 02:15:48.921] 512+0 records in [2025-09-24 02:15:48.921] 512+0 records out [2025-09-24 02:15:48.953] Starting syslogd/klogd: done [2025-09-24 02:15:48.969] DML Start [2025-09-24 02:15:49.145] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:15:49.369] DML res1: 0 [2025-09-24 02:15:49.834] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:15:49.850] Read Success [2025-09-24 02:15:49.850] Verifying certificate... [2025-09-24 02:15:50.089] Verified OK [2025-09-24 02:15:50.105] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:15:51.876] Verified OK [2025-09-24 02:15:51.876] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:15:52.478] Verified OK [2025-09-24 02:15:52.478] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:15:55.035] fs.protected_hardlinks = 1 [2025-09-24 02:15:55.052] fs.protected_symlinks = 1 [2025-09-24 02:15:55.068] kernel.modules_disabled = 1 [2025-09-24 02:15:55.259] [2025-09-24 02:15:55.259] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:15:56.426] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:16:04.260] SBL1:1210.0.1.0 [2025-09-24 02:16:04.292] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:16:05.875] SBL2:1210.0.1.0 [2025-09-24 02:16:05.906] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:16:06.019] j-A [2025-09-24 02:16:13.357] The R5 Autosar Classic is running [2025-09-24 02:16:13.388] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:16:13.388] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:16:13.996] INIT: version 2.96 booting [2025-09-24 02:16:14.108] INIT: Entering runlevel: 5 [2025-09-24 02:16:14.268] mtd32 attached [2025-09-24 02:16:14.268] mtd24 attached [2025-09-24 02:16:14.284] mtd28 attached [2025-09-24 02:16:14.332] RTNETLINK answers: File exists [2025-09-24 02:16:14.332] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:16:14.372] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:16:14.372] ubi1:textures is mounted. [2025-09-24 02:16:14.372] ubi0:dml_code is mounted. [2025-09-24 02:16:14.372] ubi2:animations is mounted. [2025-09-24 02:16:14.372] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:16:14.372] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:16:14.372] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:16:14.372] data.LB_FadeInType0=100 [2025-09-24 02:16:14.393] data.CHLH_FadeInType0=0 [2025-09-24 02:16:14.393] data.WU_FadeInDelay=0 [2025-09-24 02:16:14.393] max_time_out=0 [2025-09-24 02:16:14.393] No splash screen [2025-09-24 02:16:14.393] stop dss Done [2025-09-24 02:16:14.424] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:16:14.424] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:16:14.463] /dev/mem opened. [2025-09-24 02:16:14.463] Memory mapped at address 0xffffac81f000. [2025-09-24 02:16:14.463] Read at address 0x00600018 (0xffffac81f018): 0x00000000 [2025-09-24 02:16:14.463] Write at address 0x00600018 (0xffffac81f018): 0x00400040, readback 0x00400040 [2025-09-24 02:16:14.671] Loaded PowerVR consumer services. [2025-09-24 02:16:14.734] 512+0 records in [2025-09-24 02:16:14.750] 512+0 records out [2025-09-24 02:16:14.750] Waiting data available... [2025-09-24 02:16:14.766] Starting syslogd/klogd: done [2025-09-24 02:16:14.783] DML Start [2025-09-24 02:16:14.926] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:16:15.118] DML res1: 0 [2025-09-24 02:16:15.722] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:16:15.722] Read Success [2025-09-24 02:16:15.722] Verifying certificate... [2025-09-24 02:16:15.946] Verified OK [2025-09-24 02:16:15.962] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:16:17.514] Verified OK [2025-09-24 02:16:17.514] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:16:18.105] Verified OK [2025-09-24 02:16:18.105] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:16:20.824] fs.protected_hardlinks = 1 [2025-09-24 02:16:20.824] fs.protected_symlinks = 1 [2025-09-24 02:16:20.839] kernel.modules_disabled = 1 [2025-09-24 02:16:21.031] [2025-09-24 02:16:21.031] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:16:22.254] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:16:30.086] SBL1:1210.0.1.0 [2025-09-24 02:16:30.134] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:16:31.700] SBL2:1210.0.1.0 [2025-09-24 02:16:31.748] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:16:31.860] j-A [2025-09-24 02:16:39.198] The R5 Autosar Classic is running [2025-09-24 02:16:39.229] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:16:39.229] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:16:39.837] INIT: version 2.96 booting [2025-09-24 02:16:39.948] INIT: Entering runlevel: 5 [2025-09-24 02:16:40.093] mtd24 attached [2025-09-24 02:16:40.109] mtd28 attached [2025-09-24 02:16:40.125] mtd32 attached [2025-09-24 02:16:40.224] ubi0:textures is mounted. [2025-09-24 02:16:40.224] RTNETLINK answers: File exists [2025-09-24 02:16:40.224] ubi1:animations is mounted. [2025-09-24 02:16:40.224] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:16:40.224] ubi2:dml_code is mounted. [2025-09-24 02:16:40.224] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:16:40.224] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:16:40.224] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:16:40.224] data.LB_FadeInType0=100 [2025-09-24 02:16:40.224] data.CHLH_FadeInType0=0 [2025-09-24 02:16:40.224] data.WU_FadeInDelay=0 [2025-09-24 02:16:40.224] max_time_out=0 [2025-09-24 02:16:40.224] No splash screen [2025-09-24 02:16:40.224] stop dss Done [2025-09-24 02:16:40.224] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:16:40.304] /dev/mem opened. [2025-09-24 02:16:40.304] Memory mapped at address 0xffffb3171000. [2025-09-24 02:16:40.304] Read at address 0x00600018 (0xffffb3171018): 0x00000000 [2025-09-24 02:16:40.304] Write at address 0x00600018 (0xffffb3171018): 0x00400040, readback 0x00400040 [2025-09-24 02:16:40.304] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:16:40.304] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:16:40.369] Loaded PowerVR consumer services. [2025-09-24 02:16:40.544] Waiting data available... [2025-09-24 02:16:40.560] 512+0 records in [2025-09-24 02:16:40.560] 512+0 records out [2025-09-24 02:16:40.576] Starting syslogd/klogd: done [2025-09-24 02:16:40.608] DML Start [2025-09-24 02:16:40.768] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:16:41.040] DML res1: 0 [2025-09-24 02:16:41.430] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:16:41.430] Read Success [2025-09-24 02:16:41.430] Verifying certificate... [2025-09-24 02:16:41.717] Verified OK [2025-09-24 02:16:41.734] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:16:43.330] Verified OK [2025-09-24 02:16:43.330] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:16:43.978] Verified OK [2025-09-24 02:16:43.978] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:16:46.681] fs.protected_hardlinks = 1 [2025-09-24 02:16:46.696] fs.protected_symlinks = 1 [2025-09-24 02:16:46.696] kernel.modules_disabled = 1 [2025-09-24 02:16:46.888] [2025-09-24 02:16:46.888] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:16:48.097] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:16:55.884] SBL1:1210.0.1.0 [2025-09-24 02:16:55.932] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:16:57.499] SBL2:1210.0.1.0 [2025-09-24 02:16:57.546] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:16:57.643] j-A [2025-09-24 02:17:04.997] The R5 Autosar Classic is running [2025-09-24 02:17:05.022] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:17:05.022] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:17:05.630] INIT: version 2.96 booting [2025-09-24 02:17:05.741] INIT: Entering runlevel: 5 [2025-09-24 02:17:05.901] mtd32 attached [2025-09-24 02:17:05.917] mtd28 attached [2025-09-24 02:17:05.917] mtd24 attached [2025-09-24 02:17:05.949] ubi0:dml_code is mounted. [2025-09-24 02:17:05.965] ubi1:animations is mounted. [2025-09-24 02:17:05.981] RTNETLINK answers: File exists [2025-09-24 02:17:05.981] ubi2:textures is mounted. [2025-09-24 02:17:05.997] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:17:06.035] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:17:06.035] data.LB_FadeInType0=100 [2025-09-24 02:17:06.035] data.CHLH_FadeInType0=0 [2025-09-24 02:17:06.035] data.WU_FadeInDelay=0 [2025-09-24 02:17:06.035] max_time_out=0 [2025-09-24 02:17:06.035] No splash screen [2025-09-24 02:17:06.035] stop dss Done [2025-09-24 02:17:06.035] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:17:06.035] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:17:06.051] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:17:06.103] /dev/mem opened. [2025-09-24 02:17:06.103] Memory mapped at address 0xffffaa3db000. [2025-09-24 02:17:06.103] Read at address 0x00600018 (0xffffaa3db018): 0x00000000 [2025-09-24 02:17:06.103] Write at address 0x00600018 (0xffffaa3db018): 0x00400040, readback 0x00400040 [2025-09-24 02:17:06.168] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:17:06.200] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:17:06.296] Loaded PowerVR consumer services. [2025-09-24 02:17:06.403] Waiting data available... [2025-09-24 02:17:06.403] 512+0 records in [2025-09-24 02:17:06.403] 512+0 records out [2025-09-24 02:17:06.435] Starting syslogd/klogd: done [2025-09-24 02:17:06.451] DML Start [2025-09-24 02:17:06.627] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:17:06.835] DML res1: 0 [2025-09-24 02:17:07.299] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:17:07.315] Read Success [2025-09-24 02:17:07.315] Verifying certificate... [2025-09-24 02:17:07.602] Verified OK [2025-09-24 02:17:07.634] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:17:09.277] Verified OK [2025-09-24 02:17:09.277] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:17:09.848] Verified OK [2025-09-24 02:17:09.848] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:17:12.534] fs.protected_hardlinks = 1 [2025-09-24 02:17:12.550] fs.protected_symlinks = 1 [2025-09-24 02:17:12.550] kernel.modules_disabled = 1 [2025-09-24 02:17:12.758] [2025-09-24 02:17:12.758] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:17:13.889] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:17:21.692] SBL1:1210.0.1.0 [2025-09-24 02:17:21.724] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:17:23.307] SBL2:1210.0.1.0 [2025-09-24 02:17:23.339] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:17:23.451] j-A [2025-09-24 02:17:30.824] The R5 Autosar Classic is running [2025-09-24 02:17:30.824] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:17:30.824] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:17:31.431] INIT: version 2.96 booting [2025-09-24 02:17:31.543] INIT: Entering runlevel: 5 [2025-09-24 02:17:31.686] mtd32 attached [2025-09-24 02:17:31.702] mtd28 attached [2025-09-24 02:17:31.718] mtd24 attached [2025-09-24 02:17:31.767] RTNETLINK answers: File exists [2025-09-24 02:17:31.767] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:17:31.807] ubi1:animations is mounted. [2025-09-24 02:17:31.807] ubi0:dml_code is mounted. [2025-09-24 02:17:31.807] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:17:31.807] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:17:31.807] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:17:31.807] ubi2:textures is mounted. [2025-09-24 02:17:31.807] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:17:31.833] data.LB_FadeInType0=100 [2025-09-24 02:17:31.833] data.CHLH_FadeInType0=0 [2025-09-24 02:17:31.833] data.WU_FadeInDelay=0 [2025-09-24 02:17:31.833] max_time_out=0 [2025-09-24 02:17:31.833] No splash screen [2025-09-24 02:17:31.833] stop dss Done [2025-09-24 02:17:31.849] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:17:31.864] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:17:31.901] /dev/mem opened. [2025-09-24 02:17:31.901] Memory mapped at address 0xffff9b5ff000. [2025-09-24 02:17:31.901] Read at address 0x00600018 (0xffff9b5ff018): 0x00000000 [2025-09-24 02:17:31.901] Write at address 0x00600018 (0xffff9b5ff018): 0x00400040, readback 0x00400040 [2025-09-24 02:17:31.998] Loaded PowerVR consumer services. [2025-09-24 02:17:32.142] Waiting data available... [2025-09-24 02:17:32.158] 512+0 records in [2025-09-24 02:17:32.158] 512+0 records out [2025-09-24 02:17:32.205] Starting syslogd/klogd: done [2025-09-24 02:17:32.221] DML Start [2025-09-24 02:17:32.398] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:17:32.621] DML res1: 0 [2025-09-24 02:17:32.996] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:17:32.996] Read Success [2025-09-24 02:17:32.996] Verifying certificate... [2025-09-24 02:17:33.251] Verified OK [2025-09-24 02:17:33.251] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:17:34.894] Verified OK [2025-09-24 02:17:34.894] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:17:35.593] Verified OK [2025-09-24 02:17:35.593] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:17:38.215] fs.protected_hardlinks = 1 [2025-09-24 02:17:38.231] fs.protected_symlinks = 1 [2025-09-24 02:17:38.231] kernel.modules_disabled = 1 [2025-09-24 02:17:38.422] [2025-09-24 02:17:38.422] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:17:39.702] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:17:47.506] SBL1:1210.0.1.0 [2025-09-24 02:17:47.554] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:17:49.121] SBL2:1210.0.1.0 [2025-09-24 02:17:49.169] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:17:49.265] j-A [2025-09-24 02:17:56.620] The R5 Autosar Classic is running [2025-09-24 02:17:56.642] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:17:56.642] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:17:57.249] INIT: version 2.96 booting [2025-09-24 02:17:57.361] INIT: Entering runlevel: 5 [2025-09-24 02:17:57.521] mtd24 attached [2025-09-24 02:17:57.521] mtd28 attached [2025-09-24 02:17:57.537] mtd32 attached [2025-09-24 02:17:57.585] RTNETLINK answers: File exists [2025-09-24 02:17:57.627] ubi0:textures is mounted. [2025-09-24 02:17:57.627] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:17:57.627] ubi1:animations is mounted. [2025-09-24 02:17:57.627] ubi2:dml_code is mounted. [2025-09-24 02:17:57.627] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:17:57.627] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:17:57.627] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:17:57.627] data.LB_FadeInType0=100 [2025-09-24 02:17:57.653] data.CHLH_FadeInType0=0 [2025-09-24 02:17:57.653] data.WU_FadeInDelay=0 [2025-09-24 02:17:57.653] max_time_out=0 [2025-09-24 02:17:57.653] No splash screen [2025-09-24 02:17:57.653] stop dss Done [2025-09-24 02:17:57.653] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:17:57.684] /dev/mem opened. [2025-09-24 02:17:57.684] Memory mapped at address 0xffffb66be000. [2025-09-24 02:17:57.716] Read at address 0x00600018 (0xffffb66be018): 0x00000000 [2025-09-24 02:17:57.716] Write at address 0x00600018 (0xffffb66be018): 0x00400040, readback 0x00400040 [2025-09-24 02:17:57.716] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:17:57.716] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:17:57.812] Loaded PowerVR consumer services. [2025-09-24 02:17:57.987] 512+0 records in [2025-09-24 02:17:57.987] 512+0 records out [2025-09-24 02:17:57.987] Waiting data available... [2025-09-24 02:17:58.019] Starting syslogd/klogd: done [2025-09-24 02:17:58.035] DML Start [2025-09-24 02:17:58.211] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:17:58.435] DML res1: 0 [2025-09-24 02:17:58.904] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:17:58.904] Read Success [2025-09-24 02:17:58.904] Verifying certificate... [2025-09-24 02:17:59.112] Verified OK [2025-09-24 02:17:59.128] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:18:00.757] Verified OK [2025-09-24 02:18:00.757] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:18:01.443] Verified OK [2025-09-24 02:18:01.444] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:18:04.098] fs.protected_hardlinks = 1 [2025-09-24 02:18:04.114] fs.protected_symlinks = 1 [2025-09-24 02:18:04.114] kernel.modules_disabled = 1 [2025-09-24 02:18:04.321] [2025-09-24 02:18:04.321] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:18:05.504] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:18:13.290] SBL1:1210.0.1.0 [2025-09-24 02:18:13.338] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:18:14.922] SBL2:1210.0.1.0 [2025-09-24 02:18:14.954] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:18:15.065] j-A [2025-09-24 02:18:22.405] The R5 Autosar Classic is running [2025-09-24 02:18:22.430] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:18:22.430] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:18:23.037] INIT: version 2.96 booting [2025-09-24 02:18:23.149] INIT: Entering runlevel: 5 [2025-09-24 02:18:23.309] mtd24 attached [2025-09-24 02:18:23.324] mtd32 attached [2025-09-24 02:18:23.324] mtd28 attached [2025-09-24 02:18:23.356] ubi0:textures is mounted. [2025-09-24 02:18:23.430] RTNETLINK answers: File exists [2025-09-24 02:18:23.430] ubi2:animations is mounted. [2025-09-24 02:18:23.430] ubi1:dml_code is mounted. [2025-09-24 02:18:23.430] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:18:23.430] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:18:23.430] data.LB_FadeInType0=100 [2025-09-24 02:18:23.430] data.CHLH_FadeInType0=0 [2025-09-24 02:18:23.430] data.WU_FadeInDelay=0 [2025-09-24 02:18:23.430] max_time_out=0 [2025-09-24 02:18:23.430] No splash screen [2025-09-24 02:18:23.430] stop dss Done [2025-09-24 02:18:23.430] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:18:23.430] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:18:23.430] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:18:23.478] /dev/mem opened. [2025-09-24 02:18:23.478] Memory mapped at address 0xffffb2194000. [2025-09-24 02:18:23.504] Read at address 0x00600018 (0xffffb2194018): 0x00000000 [2025-09-24 02:18:23.504] Write at address 0x00600018 (0xffffb2194018): 0x00400040, readback 0x00400040 [2025-09-24 02:18:23.519] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:18:23.536] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:18:23.615] Loaded PowerVR consumer services. [2025-09-24 02:18:23.773] Waiting data available... [2025-09-24 02:18:23.773] 512+0 records in [2025-09-24 02:18:23.773] 512+0 records out [2025-09-24 02:18:23.804] Starting syslogd/klogd: done [2025-09-24 02:18:23.836] DML Start [2025-09-24 02:18:24.013] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:18:24.252] DML res1: 0 [2025-09-24 02:18:24.700] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:18:24.716] Read Success [2025-09-24 02:18:24.716] Verifying certificate... [2025-09-24 02:18:24.972] Verified OK [2025-09-24 02:18:24.987] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:18:26.650] Verified OK [2025-09-24 02:18:26.672] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:18:27.268] Verified OK [2025-09-24 02:18:27.268] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:18:29.857] fs.protected_hardlinks = 1 [2025-09-24 02:18:29.873] fs.protected_symlinks = 1 [2025-09-24 02:18:29.873] kernel.modules_disabled = 1 [2025-09-24 02:18:30.065] [2025-09-24 02:18:30.065] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:18:31.335] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:18:39.121] SBL1:1210.0.1.0 [2025-09-24 02:18:39.169] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:18:40.736] SBL2:1210.0.1.0 [2025-09-24 02:18:40.767] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:18:40.879] j-A [2025-09-24 02:18:48.256] The R5 Autosar Classic is running [2025-09-24 02:18:48.256] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:18:48.256] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:18:48.863] INIT: version 2.96 booting [2025-09-24 02:18:48.974] INIT: Entering runlevel: 5 [2025-09-24 02:18:49.118] mtd28 attached [2025-09-24 02:18:49.134] mtd24 attached [2025-09-24 02:18:49.167] ubi0:animations is mounted. [2025-09-24 02:18:49.167] mtd32 attached [2025-09-24 02:18:49.183] ubi1:textures is mounted. [2025-09-24 02:18:49.199] RTNETLINK answers: File exists [2025-09-24 02:18:49.258] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:18:49.258] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:18:49.258] ubi2:dml_code is mounted. [2025-09-24 02:18:49.258] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:18:49.258] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:18:49.258] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:18:49.258] data.LB_FadeInType0=100 [2025-09-24 02:18:49.258] data.CHLH_FadeInType0=0 [2025-09-24 02:18:49.258] data.WU_FadeInDelay=0 [2025-09-24 02:18:49.258] max_time_out=0 [2025-09-24 02:18:49.258] No splash screen [2025-09-24 02:18:49.258] stop dss Done [2025-09-24 02:18:49.306] /dev/mem opened. [2025-09-24 02:18:49.306] Memory mapped at address 0xffff93634000. [2025-09-24 02:18:49.332] Read at address 0x00600018 (0xffff93634018): 0x00000000 [2025-09-24 02:18:49.332] Write at address 0x00600018 (0xffff93634018): 0x00400040, readback 0x00400040 [2025-09-24 02:18:49.348] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:18:49.363] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:18:49.443] Loaded PowerVR consumer services. [2025-09-24 02:18:49.599] Waiting data available... [2025-09-24 02:18:49.599] 512+0 records in [2025-09-24 02:18:49.599] 512+0 records out [2025-09-24 02:18:49.631] Starting syslogd/klogd: done [2025-09-24 02:18:49.663] DML Start [2025-09-24 02:18:49.823] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:18:50.079] DML res1: 0 [2025-09-24 02:18:50.382] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:18:50.398] Read Success [2025-09-24 02:18:50.398] Verifying certificate... [2025-09-24 02:18:50.638] Verified OK [2025-09-24 02:18:50.654] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:18:52.269] Verified OK [2025-09-24 02:18:52.269] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:18:52.876] Verified OK [2025-09-24 02:18:52.876] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:18:55.626] fs.protected_hardlinks = 1 [2025-09-24 02:18:55.626] fs.protected_symlinks = 1 [2025-09-24 02:18:55.642] kernel.modules_disabled = 1 [2025-09-24 02:18:55.834] [2025-09-24 02:18:55.834] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:18:57.168] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:19:04.917] SBL1:1210.0.1.0 [2025-09-24 02:19:04.965] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:19:06.532] SBL2:1210.0.1.0 [2025-09-24 02:19:06.579] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:19:06.675] j-A [2025-09-24 02:19:14.032] The R5 Autosar Classic is running [2025-09-24 02:19:14.055] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:19:14.055] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:19:14.662] INIT: version 2.96 booting [2025-09-24 02:19:14.774] INIT: Entering runlevel: 5 [2025-09-24 02:19:14.935] mtd28 attached [2025-09-24 02:19:14.935] mtd24 attached [2025-09-24 02:19:14.950] mtd32 attached [2025-09-24 02:19:14.998] RTNETLINK answers: File exists [2025-09-24 02:19:15.062] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:19:15.062] ubi0:animations is mounted. [2025-09-24 02:19:15.062] ubi2:dml_code is mounted. [2025-09-24 02:19:15.062] ubi1:textures is mounted. [2025-09-24 02:19:15.062] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:19:15.062] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:19:15.062] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:19:15.062] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:19:15.062] data.LB_FadeInType0=100 [2025-09-24 02:19:15.062] data.CHLH_FadeInType0=0 [2025-09-24 02:19:15.062] data.WU_FadeInDelay=0 [2025-09-24 02:19:15.062] max_time_out=0 [2025-09-24 02:19:15.062] No splash screen [2025-09-24 02:19:15.062] stop dss Done [2025-09-24 02:19:15.128] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:19:15.128] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:19:15.128] /dev/mem opened. [2025-09-24 02:19:15.128] Memory mapped at address 0xffff9a122000. [2025-09-24 02:19:15.128] Read at address 0x00600018 (0xffff9a122018): 0x00000000 [2025-09-24 02:19:15.128] Write at address 0x00600018 (0xffff9a122018): 0x00400040, readback 0x00400040 [2025-09-24 02:19:15.288] Loaded PowerVR consumer services. [2025-09-24 02:19:15.400] Waiting data available... [2025-09-24 02:19:15.432] 512+0 records in [2025-09-24 02:19:15.432] 512+0 records out [2025-09-24 02:19:15.464] Starting syslogd/klogd: done [2025-09-24 02:19:15.480] DML Start [2025-09-24 02:19:15.624] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:19:15.847] DML res1: 0 [2025-09-24 02:19:16.349] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:19:16.349] Read Success [2025-09-24 02:19:16.349] Verifying certificate... [2025-09-24 02:19:16.573] Verified OK [2025-09-24 02:19:16.589] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:19:18.266] Verified OK [2025-09-24 02:19:18.266] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:19:18.810] Verified OK [2025-09-24 02:19:18.810] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:19:21.415] fs.protected_hardlinks = 1 [2025-09-24 02:19:21.415] fs.protected_symlinks = 1 [2025-09-24 02:19:21.431] kernel.modules_disabled = 1 [2025-09-24 02:19:21.623] [2025-09-24 02:19:21.623] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:19:22.897] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:19:30.731] SBL1:1210.0.1.0 [2025-09-24 02:19:30.763] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:19:32.346] SBL2:1210.0.1.0 [2025-09-24 02:19:32.378] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:19:32.490] j-A [2025-09-24 02:19:39.829] The R5 Autosar Classic is running [2025-09-24 02:19:39.860] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:19:39.860] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:19:40.468] INIT: version 2.96 booting [2025-09-24 02:19:40.580] INIT: Entering runlevel: 5 [2025-09-24 02:19:40.724] mtd28 attached [2025-09-24 02:19:40.740] mtd24 attached [2025-09-24 02:19:40.756] mtd32 attached [2025-09-24 02:19:40.804] RTNETLINK answers: File exists [2025-09-24 02:19:40.870] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:19:40.870] ubi0:animations is mounted. [2025-09-24 02:19:40.870] ubi1:textures is mounted. [2025-09-24 02:19:40.870] ubi2:dml_code is mounted. [2025-09-24 02:19:40.870] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:19:40.870] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:19:40.870] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:19:40.870] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:19:40.870] data.LB_FadeInType0=100 [2025-09-24 02:19:40.871] data.CHLH_FadeInType0=0 [2025-09-24 02:19:40.871] data.WU_FadeInDelay=0 [2025-09-24 02:19:40.871] max_time_out=0 [2025-09-24 02:19:40.871] No splash screen [2025-09-24 02:19:40.871] stop dss Done [2025-09-24 02:19:40.956] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:19:40.956] /dev/mem opened. [2025-09-24 02:19:40.956] Memory mapped at address 0xffff83d46000. [2025-09-24 02:19:40.956] Read at address 0x00600018 (0xffff83d46018): 0x00000000 [2025-09-24 02:19:40.956] Write at address 0x00600018 (0xffff83d46018): 0x00400040, readback 0x00400040 [2025-09-24 02:19:40.956] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:19:41.180] Loaded PowerVR consumer services. [2025-09-24 02:19:41.196] Waiting data available... [2025-09-24 02:19:41.228] 512+0 records in [2025-09-24 02:19:41.228] 512+0 records out [2025-09-24 02:19:41.244] Starting syslogd/klogd: done [2025-09-24 02:19:41.276] DML Start [2025-09-24 02:19:41.435] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:19:41.644] DML res1: 0 [2025-09-24 02:19:42.084] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:19:42.084] Read Success [2025-09-24 02:19:42.084] Verifying certificate... [2025-09-24 02:19:42.372] Verified OK [2025-09-24 02:19:42.388] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:19:44.067] Verified OK [2025-09-24 02:19:44.067] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:19:44.611] Verified OK [2025-09-24 02:19:44.611] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:19:47.117] fs.protected_hardlinks = 1 [2025-09-24 02:19:47.117] fs.protected_symlinks = 1 [2025-09-24 02:19:47.117] kernel.modules_disabled = 1 [2025-09-24 02:19:47.293] [2025-09-24 02:19:47.293] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:19:48.726] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:19:56.562] SBL1:1210.0.1.0 [2025-09-24 02:19:56.594] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:19:58.176] SBL2:1210.0.1.0 [2025-09-24 02:19:58.208] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:19:58.321] j-A [2025-09-24 02:20:05.660] The R5 Autosar Classic is running [2025-09-24 02:20:05.691] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:20:05.691] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:20:06.299] INIT: version 2.96 booting [2025-09-24 02:20:06.411] INIT: Entering runlevel: 5 [2025-09-24 02:20:06.571] mtd24 attached [2025-09-24 02:20:06.571] mtd28 attached [2025-09-24 02:20:06.587] mtd32 attached [2025-09-24 02:20:06.634] ubi0:textures is mounted. [2025-09-24 02:20:06.634] ubi1:animations is mounted. [2025-09-24 02:20:06.650] RTNETLINK answers: File exists [2025-09-24 02:20:06.650] ubi2:dml_code is mounted. [2025-09-24 02:20:06.689] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:20:06.689] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:20:06.689] data.LB_FadeInType0=100 [2025-09-24 02:20:06.689] data.CHLH_FadeInType0=0 [2025-09-24 02:20:06.689] data.WU_FadeInDelay=0 [2025-09-24 02:20:06.689] max_time_out=0 [2025-09-24 02:20:06.689] No splash screen [2025-09-24 02:20:06.689] stop dss Done [2025-09-24 02:20:06.689] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:20:06.718] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:20:06.718] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:20:06.751] /dev/mem opened. [2025-09-24 02:20:06.751] Memory mapped at address 0xffffa2b03000. [2025-09-24 02:20:06.751] Read at address 0x00600018 (0xffffa2b03018): 0x00000000 [2025-09-24 02:20:06.751] Write at address 0x00600018 (0xffffa2b03018): 0x00400040, readback 0x00400040 [2025-09-24 02:20:06.839] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:20:06.839] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:20:06.871] Loaded PowerVR consumer services. [2025-09-24 02:20:07.014] Waiting data available... [2025-09-24 02:20:07.030] 512+0 records in [2025-09-24 02:20:07.030] 512+0 records out [2025-09-24 02:20:07.079] Starting syslogd/klogd: done [2025-09-24 02:20:07.095] DML Start [2025-09-24 02:20:07.270] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:20:07.542] DML res1: 0 [2025-09-24 02:20:07.910] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:20:07.926] Read Success [2025-09-24 02:20:07.926] Verifying certificate... [2025-09-24 02:20:08.150] Verified OK [2025-09-24 02:20:08.166] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:20:09.749] Verified OK [2025-09-24 02:20:09.771] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:20:10.361] Verified OK [2025-09-24 02:20:10.377] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:20:13.128] fs.protected_hardlinks = 1 [2025-09-24 02:20:13.144] fs.protected_symlinks = 1 [2025-09-24 02:20:13.144] kernel.modules_disabled = 1 [2025-09-24 02:20:13.352] [2025-09-24 02:20:13.352] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:20:14.599] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:20:22.365] SBL1:1210.0.1.0 [2025-09-24 02:20:22.413] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:20:23.980] SBL2:1210.0.1.0 [2025-09-24 02:20:24.028] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:20:24.123] j-A [2025-09-24 02:20:31.478] The R5 Autosar Classic is running [2025-09-24 02:20:31.502] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:20:31.502] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:20:32.110] INIT: version 2.96 booting [2025-09-24 02:20:32.222] INIT: Entering runlevel: 5 [2025-09-24 02:20:32.382] mtd24 attached [2025-09-24 02:20:32.382] mtd28 attached [2025-09-24 02:20:32.398] mtd32 attached [2025-09-24 02:20:32.446] RTNETLINK answers: File exists [2025-09-24 02:20:32.446] ubi1:animations is mounted. [2025-09-24 02:20:32.496] ubi0:textures is mounted. [2025-09-24 02:20:32.496] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:20:32.496] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:20:32.496] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:20:32.496] ubi2:dml_code is mounted. [2025-09-24 02:20:32.496] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:20:32.496] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:20:32.496] data.LB_FadeInType0=100 [2025-09-24 02:20:32.496] data.CHLH_FadeInType0=0 [2025-09-24 02:20:32.517] data.WU_FadeInDelay=0 [2025-09-24 02:20:32.517] max_time_out=0 [2025-09-24 02:20:32.517] No splash screen [2025-09-24 02:20:32.517] stop dss Done [2025-09-24 02:20:32.532] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:20:32.548] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:20:32.602] /dev/mem opened. [2025-09-24 02:20:32.602] Memory mapped at address 0xffff8d574000. [2025-09-24 02:20:32.602] Read at address 0x00600018 (0xffff8d574018): 0x00000000 [2025-09-24 02:20:32.602] Write at address 0x00600018 (0xffff8d574018): 0x00400040, readback 0x00400040 [2025-09-24 02:20:32.666] Loaded PowerVR consumer services. [2025-09-24 02:20:32.842] Waiting data available... [2025-09-24 02:20:32.842] 512+0 records in [2025-09-24 02:20:32.858] 512+0 records out [2025-09-24 02:20:32.889] Starting syslogd/klogd: done [2025-09-24 02:20:32.921] DML Start [2025-09-24 02:20:33.082] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:20:33.321] DML res1: 0 [2025-09-24 02:20:33.750] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:20:33.750] Read Success [2025-09-24 02:20:33.750] Verifying certificate... [2025-09-24 02:20:34.020] Verified OK [2025-09-24 02:20:34.037] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:20:35.678] Verified OK [2025-09-24 02:20:35.678] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:20:36.324] Verified OK [2025-09-24 02:20:36.324] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:20:39.010] fs.protected_hardlinks = 1 [2025-09-24 02:20:39.010] fs.protected_symlinks = 1 [2025-09-24 02:20:39.010] kernel.modules_disabled = 1 [2025-09-24 02:20:39.202] [2025-09-24 02:20:39.202] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:20:40.369] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:20:48.196] SBL1:1210.0.1.0 [2025-09-24 02:20:48.244] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:20:49.810] SBL2:1210.0.1.0 [2025-09-24 02:20:49.858] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:20:49.955] j-A [2025-09-24 02:20:57.308] The R5 Autosar Classic is running [2025-09-24 02:20:57.330] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:20:57.330] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:20:57.938] INIT: version 2.96 booting [2025-09-24 02:20:58.050] INIT: Entering runlevel: 5 [2025-09-24 02:20:58.210] mtd28 attached [2025-09-24 02:20:58.226] mtd32 attached [2025-09-24 02:20:58.226] mtd24 attached [2025-09-24 02:20:58.273] ubi0:animations is mounted. [2025-09-24 02:20:58.273] RTNETLINK answers: File exists [2025-09-24 02:20:58.310] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:20:58.310] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:20:58.310] ubi1:dml_code is mounted. [2025-09-24 02:20:58.310] ubi2:textures is mounted. [2025-09-24 02:20:58.310] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:20:58.310] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:20:58.310] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:20:58.341] data.LB_FadeInType0=100 [2025-09-24 02:20:58.341] data.CHLH_FadeInType0=0 [2025-09-24 02:20:58.341] data.WU_FadeInDelay=0 [2025-09-24 02:20:58.341] max_time_out=0 [2025-09-24 02:20:58.341] No splash screen [2025-09-24 02:20:58.341] stop dss Done [2025-09-24 02:20:58.357] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:20:58.373] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:20:58.427] /dev/mem opened. [2025-09-24 02:20:58.427] Memory mapped at address 0xffffa9e23000. [2025-09-24 02:20:58.427] Read at address 0x00600018 (0xffffa9e23018): 0x00000000 [2025-09-24 02:20:58.427] Write at address 0x00600018 (0xffffa9e23018): 0x00400040, readback 0x00400040 [2025-09-24 02:20:58.587] Loaded PowerVR consumer services. [2025-09-24 02:20:58.692] Waiting data available... [2025-09-24 02:20:58.692] 512+0 records in [2025-09-24 02:20:58.692] 512+0 records out [2025-09-24 02:20:58.708] Starting syslogd/klogd: done [2025-09-24 02:20:58.725] DML Start [2025-09-24 02:20:58.884] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:20:59.124] DML res1: 0 [2025-09-24 02:20:59.524] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:20:59.545] Read Success [2025-09-24 02:20:59.545] Verifying certificate... [2025-09-24 02:20:59.752] Verified OK [2025-09-24 02:20:59.768] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:21:01.272] Verified OK [2025-09-24 02:21:01.288] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:21:01.991] Verified OK [2025-09-24 02:21:01.991] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:21:04.805] fs.protected_hardlinks = 1 [2025-09-24 02:21:04.821] fs.protected_symlinks = 1 [2025-09-24 02:21:04.821] kernel.modules_disabled = 1 [2025-09-24 02:21:05.014] [2025-09-24 02:21:05.014] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:21:06.209] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:21:14.001] SBL1:1210.0.1.0 [2025-09-24 02:21:14.049] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:21:15.617] SBL2:1210.0.1.0 [2025-09-24 02:21:15.665] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:21:15.761] j-A [2025-09-24 02:21:23.114] The R5 Autosar Classic is running [2025-09-24 02:21:23.138] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:21:23.138] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:21:23.746] INIT: version 2.96 booting [2025-09-24 02:21:23.858] INIT: Entering runlevel: 5 [2025-09-24 02:21:24.001] mtd32 attached [2025-09-24 02:21:24.017] mtd28 attached [2025-09-24 02:21:24.033] mtd24 attached [2025-09-24 02:21:24.082] RTNETLINK answers: File exists [2025-09-24 02:21:24.082] ubi0:dml_code is mounted. [2025-09-24 02:21:24.137] ubi1:animations is mounted. [2025-09-24 02:21:24.137] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:21:24.137] ubi2:textures is mounted. [2025-09-24 02:21:24.137] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:21:24.137] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:21:24.137] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:21:24.137] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:21:24.137] data.LB_FadeInType0=100 [2025-09-24 02:21:24.137] data.CHLH_FadeInType0=0 [2025-09-24 02:21:24.137] data.WU_FadeInDelay=0 [2025-09-24 02:21:24.137] max_time_out=0 [2025-09-24 02:21:24.137] No splash screen [2025-09-24 02:21:24.137] stop dss Done [2025-09-24 02:21:24.209] /dev/mem opened. [2025-09-24 02:21:24.209] Memory mapped at address 0xffffa4e8c000. [2025-09-24 02:21:24.209] Read at address 0x00600018 (0xffffa4e8c018): 0x00000000 [2025-09-24 02:21:24.209] Write at address 0x00600018 (0xffffa4e8c018): 0x00400040, readback 0x00400040 [2025-09-24 02:21:24.237] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:21:24.237] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:21:24.382] Loaded PowerVR consumer services. [2025-09-24 02:21:24.461] Waiting data available... [2025-09-24 02:21:24.477] 512+0 records in [2025-09-24 02:21:24.477] 512+0 records out [2025-09-24 02:21:24.525] Starting syslogd/klogd: done [2025-09-24 02:21:24.541] DML Start [2025-09-24 02:21:24.717] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:21:24.940] DML res1: 0 [2025-09-24 02:21:25.389] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:21:25.410] Read Success [2025-09-24 02:21:25.410] Verifying certificate... [2025-09-24 02:21:25.649] Verified OK [2025-09-24 02:21:25.665] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:21:27.344] Verified OK [2025-09-24 02:21:27.366] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:21:27.989] Verified OK [2025-09-24 02:21:27.989] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:21:30.595] fs.protected_hardlinks = 1 [2025-09-24 02:21:30.595] fs.protected_symlinks = 1 [2025-09-24 02:21:30.611] kernel.modules_disabled = 1 [2025-09-24 02:21:30.819] [2025-09-24 02:21:30.819] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:21:32.032] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:21:39.803] SBL1:1210.0.1.0 [2025-09-24 02:21:39.851] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:21:41.417] SBL2:1210.0.1.0 [2025-09-24 02:21:41.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:21:41.561] j-A [2025-09-24 02:21:48.915] The R5 Autosar Classic is running [2025-09-24 02:21:48.937] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:21:48.938] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:21:49.545] INIT: version 2.96 booting [2025-09-24 02:21:49.657] INIT: Entering runlevel: 5 [2025-09-24 02:21:49.817] mtd24 attached [2025-09-24 02:21:49.817] mtd28 attached [2025-09-24 02:21:49.833] mtd32 attached [2025-09-24 02:21:49.849] ubi0:textures is mounted. [2025-09-24 02:21:49.880] RTNETLINK answers: File exists [2025-09-24 02:21:49.938] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:21:49.938] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:21:49.938] ubi1:animations is mounted. [2025-09-24 02:21:49.938] ubi2:dml_code is mounted. [2025-09-24 02:21:49.938] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:21:49.938] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:21:49.938] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:21:49.938] data.LB_FadeInType0=100 [2025-09-24 02:21:49.938] data.CHLH_FadeInType0=0 [2025-09-24 02:21:49.938] data.WU_FadeInDelay=0 [2025-09-24 02:21:49.938] max_time_out=0 [2025-09-24 02:21:49.938] No splash screen [2025-09-24 02:21:49.938] stop dss Done [2025-09-24 02:21:49.981] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:21:49.981] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:21:50.017] /dev/mem opened. [2025-09-24 02:21:50.017] Memory mapped at address 0xffffaf9fd000. [2025-09-24 02:21:50.017] Read at address 0x00600018 (0xffffaf9fd018): 0x00000000 [2025-09-24 02:21:50.017] Write at address 0x00600018 (0xffffaf9fd018): 0x00400040, readback 0x00400040 [2025-09-24 02:21:50.161] Loaded PowerVR consumer services. [2025-09-24 02:21:50.257] Waiting data available... [2025-09-24 02:21:50.273] 512+0 records in [2025-09-24 02:21:50.273] 512+0 records out [2025-09-24 02:21:50.305] Starting syslogd/klogd: done [2025-09-24 02:21:50.321] DML Start [2025-09-24 02:21:50.480] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:21:50.688] DML res1: 0 [2025-09-24 02:21:51.135] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:21:51.151] Read Success [2025-09-24 02:21:51.151] Verifying certificate... [2025-09-24 02:21:51.423] Verified OK [2025-09-24 02:21:51.439] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:21:53.176] Verified OK [2025-09-24 02:21:53.176] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:21:53.759] Verified OK [2025-09-24 02:21:53.759] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:21:56.254] fs.protected_hardlinks = 1 [2025-09-24 02:21:56.254] fs.protected_symlinks = 1 [2025-09-24 02:21:56.270] kernel.modules_disabled = 1 [2025-09-24 02:21:56.462] [2025-09-24 02:21:56.462] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:21:57.815] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:22:05.607] SBL1:1210.0.1.0 [2025-09-24 02:22:05.655] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:22:07.221] SBL2:1210.0.1.0 [2025-09-24 02:22:07.269] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:22:07.381] j-A [2025-09-24 02:22:14.719] The R5 Autosar Classic is running [2025-09-24 02:22:14.744] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:22:14.744] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:22:15.352] INIT: version 2.96 booting [2025-09-24 02:22:15.463] INIT: Entering runlevel: 5 [2025-09-24 02:22:15.607] mtd24 attached [2025-09-24 02:22:15.623] mtd28 attached [2025-09-24 02:22:15.639] mtd32 attached [2025-09-24 02:22:15.671] ubi0:textures is mounted. [2025-09-24 02:22:15.687] ubi1:animations is mounted. [2025-09-24 02:22:15.687] RTNETLINK answers: File exists [2025-09-24 02:22:15.745] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:22:15.745] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:22:15.745] ubi2:dml_code is mounted. [2025-09-24 02:22:15.745] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:22:15.745] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:22:15.745] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:22:15.745] data.LB_FadeInType0=100 [2025-09-24 02:22:15.745] data.CHLH_FadeInType0=0 [2025-09-24 02:22:15.745] data.WU_FadeInDelay=0 [2025-09-24 02:22:15.745] max_time_out=0 [2025-09-24 02:22:15.745] No splash screen [2025-09-24 02:22:15.745] stop dss Done [2025-09-24 02:22:15.793] /dev/mem opened. [2025-09-24 02:22:15.830] Memory mapped at address 0xffffa6782000. [2025-09-24 02:22:15.830] Read at address 0x00600018 (0xffffa6782018): 0x00000000 [2025-09-24 02:22:15.830] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:22:15.830] Write at address 0x00600018 (0xffffa6782018): 0x00400040, readback 0x00400040 [2025-09-24 02:22:15.830] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:22:15.925] Loaded PowerVR consumer services. [2025-09-24 02:22:16.085] Waiting data available... [2025-09-24 02:22:16.101] 512+0 records in [2025-09-24 02:22:16.101] 512+0 records out [2025-09-24 02:22:16.133] Starting syslogd/klogd: done [2025-09-24 02:22:16.150] DML Start [2025-09-24 02:22:16.341] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:22:16.581] DML res1: 0 [2025-09-24 02:22:16.954] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:22:16.954] Read Success [2025-09-24 02:22:16.954] Verifying certificate... [2025-09-24 02:22:17.178] Verified OK [2025-09-24 02:22:17.194] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:22:18.952] Verified OK [2025-09-24 02:22:18.952] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:22:19.525] Verified OK [2025-09-24 02:22:19.525] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:22:22.179] fs.protected_hardlinks = 1 [2025-09-24 02:22:22.179] fs.protected_symlinks = 1 [2025-09-24 02:22:22.195] kernel.modules_disabled = 1 [2025-09-24 02:22:22.386] [2025-09-24 02:22:22.386] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:22:23.608] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:22:31.414] SBL1:1210.0.1.0 [2025-09-24 02:22:31.462] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:22:33.030] SBL2:1210.0.1.0 [2025-09-24 02:22:33.077] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:22:33.189] j-A [2025-09-24 02:22:40.528] The R5 Autosar Classic is running [2025-09-24 02:22:40.553] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:22:40.553] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:22:41.161] INIT: version 2.96 booting [2025-09-24 02:22:41.272] INIT: Entering runlevel: 5 [2025-09-24 02:22:41.433] mtd32 attached [2025-09-24 02:22:41.433] mtd28 attached [2025-09-24 02:22:41.449] mtd24 attached [2025-09-24 02:22:41.496] RTNETLINK answers: File exists [2025-09-24 02:22:41.536] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:22:41.536] ubi1:animations is mounted. [2025-09-24 02:22:41.536] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:22:41.536] ubi0:dml_code is mounted. [2025-09-24 02:22:41.536] ubi2:textures is mounted. [2025-09-24 02:22:41.536] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:22:41.536] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:22:41.565] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:22:41.565] data.LB_FadeInType0=100 [2025-09-24 02:22:41.565] data.CHLH_FadeInType0=0 [2025-09-24 02:22:41.565] data.WU_FadeInDelay=0 [2025-09-24 02:22:41.565] max_time_out=0 [2025-09-24 02:22:41.565] No splash screen [2025-09-24 02:22:41.565] stop dss Done [2025-09-24 02:22:41.613] /dev/mem opened. [2025-09-24 02:22:41.613] Memory mapped at address 0xffff9fa5a000. [2025-09-24 02:22:41.645] Read at address 0x00600018 (0xffff9fa5a018): 0x00000000 [2025-09-24 02:22:41.645] Write at address 0x00600018 (0xffff9fa5a018): 0x00400040, readback 0x00400040 [2025-09-24 02:22:41.645] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:22:41.661] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:22:41.884] Loaded PowerVR consumer services. [2025-09-24 02:22:41.900] Waiting data available... [2025-09-24 02:22:41.916] 512+0 records in [2025-09-24 02:22:41.916] 512+0 records out [2025-09-24 02:22:41.964] Starting syslogd/klogd: done [2025-09-24 02:22:41.980] DML Start [2025-09-24 02:22:42.156] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:22:42.380] DML res1: 0 [2025-09-24 02:22:42.827] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:22:42.843] Read Success [2025-09-24 02:22:42.843] Verifying certificate... [2025-09-24 02:22:43.099] Verified OK [2025-09-24 02:22:43.115] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:22:44.794] Verified OK [2025-09-24 02:22:44.794] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:22:45.428] Verified OK [2025-09-24 02:22:45.428] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:22:48.001] fs.protected_hardlinks = 1 [2025-09-24 02:22:48.017] fs.protected_symlinks = 1 [2025-09-24 02:22:48.017] kernel.modules_disabled = 1 [2025-09-24 02:22:48.225] [2025-09-24 02:22:48.225] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:22:49.433] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:22:57.220] SBL1:1210.0.1.0 [2025-09-24 02:22:57.268] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:22:58.835] SBL2:1210.0.1.0 [2025-09-24 02:22:58.883] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:22:58.979] j-A [2025-09-24 02:23:06.335] The R5 Autosar Classic is running [2025-09-24 02:23:06.358] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:23:06.358] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:23:06.966] INIT: version 2.96 booting [2025-09-24 02:23:07.077] INIT: Entering runlevel: 5 [2025-09-24 02:23:07.237] mtd28 attached [2025-09-24 02:23:07.237] mtd24 attached [2025-09-24 02:23:07.253] mtd32 attached [2025-09-24 02:23:07.301] RTNETLINK answers: File exists [2025-09-24 02:23:07.301] ubi1:textures is mounted. [2025-09-24 02:23:07.342] ubi0:animations is mounted. [2025-09-24 02:23:07.342] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:23:07.342] ubi2:dml_code is mounted. [2025-09-24 02:23:07.342] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:23:07.342] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:23:07.342] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:23:07.342] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:23:07.366] data.LB_FadeInType0=100 [2025-09-24 02:23:07.366] data.CHLH_FadeInType0=0 [2025-09-24 02:23:07.366] data.WU_FadeInDelay=0 [2025-09-24 02:23:07.366] max_time_out=0 [2025-09-24 02:23:07.366] No splash screen [2025-09-24 02:23:07.366] stop dss Done [2025-09-24 02:23:07.414] /dev/mem opened. [2025-09-24 02:23:07.414] Memory mapped at address 0xffff8a99a000. [2025-09-24 02:23:07.458] Read at address 0x00600018 (0xffff8a99a018): 0x00000000 [2025-09-24 02:23:07.458] Write at address 0x00600018 (0xffff8a99a018): 0x00400040, readback 0x00400040 [2025-09-24 02:23:07.458] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:23:07.458] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:23:07.554] Loaded PowerVR consumer services. [2025-09-24 02:23:07.705] Waiting data available... [2025-09-24 02:23:07.705] 512+0 records in [2025-09-24 02:23:07.705] 512+0 records out [2025-09-24 02:23:07.737] Starting syslogd/klogd: done [2025-09-24 02:23:07.753] DML Start [2025-09-24 02:23:07.944] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:23:08.168] DML res1: 0 [2025-09-24 02:23:08.600] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:23:08.622] Read Success [2025-09-24 02:23:08.622] Verifying certificate... [2025-09-24 02:23:08.878] Verified OK [2025-09-24 02:23:08.894] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:23:10.509] Verified OK [2025-09-24 02:23:10.509] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:23:11.020] Verified OK [2025-09-24 02:23:11.020] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:23:13.786] fs.protected_hardlinks = 1 [2025-09-24 02:23:13.786] fs.protected_symlinks = 1 [2025-09-24 02:23:13.802] kernel.modules_disabled = 1 [2025-09-24 02:23:13.993] [2025-09-24 02:23:13.993] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:23:15.240] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:23:23.037] SBL1:1210.0.1.0 [2025-09-24 02:23:23.085] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:23:24.651] SBL2:1210.0.1.0 [2025-09-24 02:23:24.683] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:23:24.795] j-A [2025-09-24 02:23:32.172] The R5 Autosar Classic is running [2025-09-24 02:23:32.172] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:23:32.172] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:23:32.780] INIT: version 2.96 booting [2025-09-24 02:23:32.893] INIT: Entering runlevel: 5 [2025-09-24 02:23:33.052] mtd28 attached [2025-09-24 02:23:33.052] mtd24 attached [2025-09-24 02:23:33.068] mtd32 attached [2025-09-24 02:23:33.148] RTNETLINK answers: File exists [2025-09-24 02:23:33.148] ubi1:textures is mounted. [2025-09-24 02:23:33.148] ubi0:animations is mounted. [2025-09-24 02:23:33.148] ubi2:dml_code is mounted. [2025-09-24 02:23:33.148] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:23:33.148] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:23:33.148] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:23:33.180] data.LB_FadeInType0=100 [2025-09-24 02:23:33.181] data.CHLH_FadeInType0=0 [2025-09-24 02:23:33.181] data.WU_FadeInDelay=0 [2025-09-24 02:23:33.181] max_time_out=0 [2025-09-24 02:23:33.181] No splash screen [2025-09-24 02:23:33.181] stop dss Done [2025-09-24 02:23:33.181] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:23:33.181] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:23:33.246] /dev/mem opened. [2025-09-24 02:23:33.246] Memory mapped at address 0xffff9a425000. [2025-09-24 02:23:33.246] Read at address 0x00600018 (0xffff9a425018): 0x00000000 [2025-09-24 02:23:33.246] Write at address 0x00600018 (0xffff9a425018): 0x00400040, readback 0x00400040 [2025-09-24 02:23:33.246] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:23:33.262] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:23:33.454] Loaded PowerVR consumer services. [2025-09-24 02:23:33.540] 512+0 records in [2025-09-24 02:23:33.540] 512+0 records out [2025-09-24 02:23:33.540] Waiting data available... [2025-09-24 02:23:33.572] Starting syslogd/klogd: done [2025-09-24 02:23:33.588] DML Start [2025-09-24 02:23:33.764] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:23:33.955] DML res1: 0 [2025-09-24 02:23:34.429] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:23:34.429] Read Success [2025-09-24 02:23:34.429] Verifying certificate... [2025-09-24 02:23:34.653] Verified OK [2025-09-24 02:23:34.668] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:23:36.306] Verified OK [2025-09-24 02:23:36.306] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:23:36.866] Verified OK [2025-09-24 02:23:36.866] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:23:39.567] fs.protected_hardlinks = 1 [2025-09-24 02:23:39.567] fs.protected_symlinks = 1 [2025-09-24 02:23:39.583] kernel.modules_disabled = 1 [2025-09-24 02:23:39.775] [2025-09-24 02:23:39.775] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:23:41.040] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:23:48.843] SBL1:1210.0.1.0 [2025-09-24 02:23:48.891] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:23:50.457] SBL2:1210.0.1.0 [2025-09-24 02:23:50.505] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:23:50.601] j-A [2025-09-24 02:23:57.957] The R5 Autosar Classic is running [2025-09-24 02:23:57.979] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:23:57.979] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:23:58.587] INIT: version 2.96 booting [2025-09-24 02:23:58.699] INIT: Entering runlevel: 5 [2025-09-24 02:23:58.859] mtd24 attached [2025-09-24 02:23:58.859] mtd28 attached [2025-09-24 02:23:58.875] mtd32 attached [2025-09-24 02:23:58.923] RTNETLINK answers: File exists [2025-09-24 02:23:58.923] ubi1:animations is mounted. [2025-09-24 02:23:58.978] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:23:58.978] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:23:58.978] ubi0:textures is mounted. [2025-09-24 02:23:58.978] ubi2:dml_code is mounted. [2025-09-24 02:23:58.978] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:23:58.978] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:23:58.978] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:23:58.978] data.LB_FadeInType0=100 [2025-09-24 02:23:58.978] data.CHLH_FadeInType0=0 [2025-09-24 02:23:58.978] data.WU_FadeInDelay=0 [2025-09-24 02:23:58.978] max_time_out=0 [2025-09-24 02:23:58.978] No splash screen [2025-09-24 02:23:58.978] stop dss Done [2025-09-24 02:23:59.038] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:23:59.038] /dev/mem opened. [2025-09-24 02:23:59.038] Memory mapped at address 0xffffb0a2a000. [2025-09-24 02:23:59.038] Read at address 0x00600018 (0xffffb0a2a018): 0x00000000 [2025-09-24 02:23:59.038] Write at address 0x00600018 (0xffffb0a2a018): 0x00400040, readback 0x00400040 [2025-09-24 02:23:59.038] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:23:59.215] Loaded PowerVR consumer services. [2025-09-24 02:23:59.326] Waiting data available... [2025-09-24 02:23:59.342] 512+0 records in [2025-09-24 02:23:59.342] 512+0 records out [2025-09-24 02:23:59.375] Starting syslogd/klogd: done [2025-09-24 02:23:59.391] DML Start [2025-09-24 02:23:59.534] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:23:59.822] DML res1: 0 [2025-09-24 02:24:00.234] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:24:00.235] Read Success [2025-09-24 02:24:00.235] Verifying certificate... [2025-09-24 02:24:00.489] Verified OK [2025-09-24 02:24:00.489] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:24:02.169] Verified OK [2025-09-24 02:24:02.169] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:24:02.808] Verified OK [2025-09-24 02:24:02.808] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:24:05.381] fs.protected_hardlinks = 1 [2025-09-24 02:24:05.381] fs.protected_symlinks = 1 [2025-09-24 02:24:05.398] kernel.modules_disabled = 1 [2025-09-24 02:24:05.590] [2025-09-24 02:24:05.590] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:24:06.891] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:24:14.669] SBL1:1210.0.1.0 [2025-09-24 02:24:14.701] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:24:16.283] SBL2:1210.0.1.0 [2025-09-24 02:24:16.315] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:24:16.427] j-A [2025-09-24 02:24:23.798] The R5 Autosar Classic is running [2025-09-24 02:24:23.798] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:24:23.798] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:24:24.406] INIT: version 2.96 booting [2025-09-24 02:24:24.517] INIT: Entering runlevel: 5 [2025-09-24 02:24:24.661] mtd24 attached [2025-09-24 02:24:24.677] mtd28 attached [2025-09-24 02:24:24.694] mtd32 attached [2025-09-24 02:24:24.742] ubi1:animations is mounted. [2025-09-24 02:24:24.742] RTNETLINK answers: File exists [2025-09-24 02:24:24.776] ubi0:textures is mounted. [2025-09-24 02:24:24.776] ubi2:dml_code is mounted. [2025-09-24 02:24:24.776] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:24:24.776] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:24:24.776] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:24:24.776] data.LB_FadeInType0=100 [2025-09-24 02:24:24.808] data.CHLH_FadeInType0=0 [2025-09-24 02:24:24.808] data.WU_FadeInDelay=0 [2025-09-24 02:24:24.808] max_time_out=0 [2025-09-24 02:24:24.808] No splash screen [2025-09-24 02:24:24.808] stop dss Done [2025-09-24 02:24:24.808] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:24:24.808] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:24:24.840] /dev/mem opened. [2025-09-24 02:24:24.872] Memory mapped at address 0xffff91477000. [2025-09-24 02:24:24.872] Read at address 0x00600018 (0xffff91477018): 0x00000000 [2025-09-24 02:24:24.872] Write at address 0x00600018 (0xffff91477018): 0x00400040, readback 0x00400040 [2025-09-24 02:24:24.888] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:24:24.904] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:24:25.000] Loaded PowerVR consumer services. [2025-09-24 02:24:25.154] Waiting data available... [2025-09-24 02:24:25.154] 512+0 records in [2025-09-24 02:24:25.154] 512+0 records out [2025-09-24 02:24:25.186] Starting syslogd/klogd: done [2025-09-24 02:24:25.202] DML Start [2025-09-24 02:24:25.394] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:24:25.618] DML res1: 0 [2025-09-24 02:24:26.049] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:24:26.070] Read Success [2025-09-24 02:24:26.070] Verifying certificate... [2025-09-24 02:24:26.294] Verified OK [2025-09-24 02:24:26.310] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:24:27.925] Verified OK [2025-09-24 02:24:27.925] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:24:28.541] Verified OK [2025-09-24 02:24:28.541] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:24:31.244] fs.protected_hardlinks = 1 [2025-09-24 02:24:31.244] fs.protected_symlinks = 1 [2025-09-24 02:24:31.260] kernel.modules_disabled = 1 [2025-09-24 02:24:31.451] [2025-09-24 02:24:31.451] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:24:32.678] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:24:40.497] SBL1:1210.0.1.0 [2025-09-24 02:24:40.530] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:24:42.112] SBL2:1210.0.1.0 [2025-09-24 02:24:42.144] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:24:42.255] j-A [2025-09-24 02:24:49.627] The R5 Autosar Classic is running [2025-09-24 02:24:49.627] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:24:49.627] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:24:50.234] INIT: version 2.96 booting [2025-09-24 02:24:50.346] INIT: Entering runlevel: 5 [2025-09-24 02:24:50.506] mtd28 attached [2025-09-24 02:24:50.506] mtd32 attached [2025-09-24 02:24:50.522] mtd24 attached [2025-09-24 02:24:50.570] ubi0:animations is mounted. [2025-09-24 02:24:50.570] RTNETLINK answers: File exists [2025-09-24 02:24:50.633] ubi1:dml_code is mounted. [2025-09-24 02:24:50.633] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:24:50.633] ubi2:textures is mounted. [2025-09-24 02:24:50.633] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:24:50.633] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:24:50.633] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:24:50.633] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:24:50.633] data.LB_FadeInType0=100 [2025-09-24 02:24:50.633] data.CHLH_FadeInType0=0 [2025-09-24 02:24:50.633] data.WU_FadeInDelay=0 [2025-09-24 02:24:50.633] max_time_out=0 [2025-09-24 02:24:50.633] No splash screen [2025-09-24 02:24:50.633] stop dss Done [2025-09-24 02:24:50.664] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:24:50.701] /dev/mem opened. [2025-09-24 02:24:50.701] Memory mapped at address 0xffff81517000. [2025-09-24 02:24:50.701] Read at address 0x00600018 (0xffff81517018): 0x00000000 [2025-09-24 02:24:50.701] Write at address 0x00600018 (0xffff81517018): 0x00400040, readback 0x00400040 [2025-09-24 02:24:50.701] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:24:50.877] Loaded PowerVR consumer services. [2025-09-24 02:24:50.973] Waiting data available... [2025-09-24 02:24:51.004] 512+0 records in [2025-09-24 02:24:51.004] 512+0 records out [2025-09-24 02:24:51.020] Starting syslogd/klogd: done [2025-09-24 02:24:51.036] DML Start [2025-09-24 02:24:51.213] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:24:51.436] DML res1: 0 [2025-09-24 02:24:51.900] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:24:51.916] Read Success [2025-09-24 02:24:51.916] Verifying certificate... [2025-09-24 02:24:52.204] Verified OK [2025-09-24 02:24:52.252] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:24:53.989] Verified OK [2025-09-24 02:24:53.989] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:24:54.522] Verified OK [2025-09-24 02:24:54.522] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:24:56.952] fs.protected_hardlinks = 1 [2025-09-24 02:24:56.952] fs.protected_symlinks = 1 [2025-09-24 02:24:56.968] kernel.modules_disabled = 1 [2025-09-24 02:24:57.161] [2025-09-24 02:24:57.161] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:24:58.520] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:25:06.284] SBL1:1210.0.1.0 [2025-09-24 02:25:06.332] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:25:07.899] SBL2:1210.0.1.0 [2025-09-24 02:25:07.947] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:25:08.042] j-A [2025-09-24 02:25:15.397] The R5 Autosar Classic is running [2025-09-24 02:25:15.422] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:25:15.422] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:25:16.029] INIT: version 2.96 booting [2025-09-24 02:25:16.140] INIT: Entering runlevel: 5 [2025-09-24 02:25:16.285] mtd28 attached [2025-09-24 02:25:16.301] mtd24 attached [2025-09-24 02:25:16.317] mtd32 attached [2025-09-24 02:25:16.364] ubi0:animations is mounted. [2025-09-24 02:25:16.364] RTNETLINK answers: File exists [2025-09-24 02:25:16.420] ubi1:textures is mounted. [2025-09-24 02:25:16.420] ubi2:dml_code is mounted. [2025-09-24 02:25:16.420] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:25:16.420] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:25:16.420] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:25:16.420] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:25:16.420] data.LB_FadeInType0=100 [2025-09-24 02:25:16.420] data.CHLH_FadeInType0=0 [2025-09-24 02:25:16.420] data.WU_FadeInDelay=0 [2025-09-24 02:25:16.420] max_time_out=0 [2025-09-24 02:25:16.420] No splash screen [2025-09-24 02:25:16.420] stop dss Done [2025-09-24 02:25:16.420] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:25:16.477] /dev/mem opened. [2025-09-24 02:25:16.477] Memory mapped at address 0xffffac1aa000. [2025-09-24 02:25:16.477] Read at address 0x00600018 (0xffffac1aa018): 0x00000000 [2025-09-24 02:25:16.477] Write at address 0x00600018 (0xffffac1aa018): 0x00400040, readback 0x00400040 [2025-09-24 02:25:16.477] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:25:16.493] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:25:16.702] Loaded PowerVR consumer services. [2025-09-24 02:25:16.782] Waiting data available... [2025-09-24 02:25:16.797] 512+0 records in [2025-09-24 02:25:16.797] 512+0 records out [2025-09-24 02:25:16.845] Starting syslogd/klogd: done [2025-09-24 02:25:16.861] DML Start [2025-09-24 02:25:17.021] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:25:17.261] DML res1: 0 [2025-09-24 02:25:17.677] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:25:17.697] Read Success [2025-09-24 02:25:17.697] Verifying certificate... [2025-09-24 02:25:17.922] Verified OK [2025-09-24 02:25:17.938] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:25:19.548] Verified OK [2025-09-24 02:25:19.548] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:25:20.210] Verified OK [2025-09-24 02:25:20.210] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:25:22.846] fs.protected_hardlinks = 1 [2025-09-24 02:25:22.846] fs.protected_symlinks = 1 [2025-09-24 02:25:22.846] kernel.modules_disabled = 1 [2025-09-24 02:25:23.021] [2025-09-24 02:25:23.021] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:25:24.296] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:25:32.120] SBL1:1210.0.1.0 [2025-09-24 02:25:32.152] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:25:33.734] SBL2:1210.0.1.0 [2025-09-24 02:25:33.766] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:25:33.879] j-A [2025-09-24 02:25:41.232] The R5 Autosar Classic is running [2025-09-24 02:25:41.232] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:25:41.253] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:25:41.861] INIT: version 2.96 booting [2025-09-24 02:25:41.972] INIT: Entering runlevel: 5 [2025-09-24 02:25:42.132] mtd28 attached [2025-09-24 02:25:42.132] mtd24 attached [2025-09-24 02:25:42.148] mtd32 attached [2025-09-24 02:25:42.197] ubi0:animations is mounted. [2025-09-24 02:25:42.262] RTNETLINK answers: File exists [2025-09-24 02:25:42.262] ubi1:textures is mounted. [2025-09-24 02:25:42.262] ubi2:dml_code is mounted. [2025-09-24 02:25:42.262] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:25:42.262] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:25:42.262] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:25:42.262] data.LB_FadeInType0=100 [2025-09-24 02:25:42.262] data.CHLH_FadeInType0=0 [2025-09-24 02:25:42.262] data.WU_FadeInDelay=0 [2025-09-24 02:25:42.262] max_time_out=0 [2025-09-24 02:25:42.262] No splash screen [2025-09-24 02:25:42.262] stop dss Done [2025-09-24 02:25:42.262] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:25:42.262] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:25:42.316] /dev/mem opened. [2025-09-24 02:25:42.316] Memory mapped at address 0xffffaf942000. [2025-09-24 02:25:42.316] Read at address 0x00600018 (0xffffaf942018): 0x00000000 [2025-09-24 02:25:42.316] Write at address 0x00600018 (0xffffaf942018): 0x00400040, readback 0x00400040 [2025-09-24 02:25:42.332] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:25:42.348] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:25:42.444] Loaded PowerVR consumer services. [2025-09-24 02:25:42.588] Waiting data available... [2025-09-24 02:25:42.604] 512+0 records in [2025-09-24 02:25:42.604] 512+0 records out [2025-09-24 02:25:42.652] Starting syslogd/klogd: done [2025-09-24 02:25:42.668] DML Start [2025-09-24 02:25:42.860] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:25:43.067] DML res1: 0 [2025-09-24 02:25:43.515] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:25:43.531] Read Success [2025-09-24 02:25:43.531] Verifying certificate... [2025-09-24 02:25:43.771] Verified OK [2025-09-24 02:25:43.787] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:25:45.474] Verified OK [2025-09-24 02:25:45.474] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:25:46.033] Verified OK [2025-09-24 02:25:46.033] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:25:48.559] fs.protected_hardlinks = 1 [2025-09-24 02:25:48.575] fs.protected_symlinks = 1 [2025-09-24 02:25:48.575] kernel.modules_disabled = 1 [2025-09-24 02:25:48.767] [2025-09-24 02:25:48.767] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:25:50.141] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:25:57.920] SBL1:1210.0.1.0 [2025-09-24 02:25:57.968] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:25:59.534] SBL2:1210.0.1.0 [2025-09-24 02:25:59.582] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:25:59.694] j-A [2025-09-24 02:26:07.032] The R5 Autosar Classic is running [2025-09-24 02:26:07.057] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:26:07.057] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:26:07.664] INIT: version 2.96 booting [2025-09-24 02:26:07.776] INIT: Entering runlevel: 5 [2025-09-24 02:26:07.937] mtd28 attached [2025-09-24 02:26:07.953] mtd24 attached [2025-09-24 02:26:07.969] mtd32 attached [2025-09-24 02:26:08.000] ubi0:animations is mounted. [2025-09-24 02:26:08.045] RTNETLINK answers: File exists [2025-09-24 02:26:08.045] ubi1:textures is mounted. [2025-09-24 02:26:08.045] ubi2:dml_code is mounted. [2025-09-24 02:26:08.045] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:26:08.045] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:26:08.045] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:26:08.045] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:26:08.071] data.LB_FadeInType0=100 [2025-09-24 02:26:08.071] data.CHLH_FadeInType0=0 [2025-09-24 02:26:08.071] data.WU_FadeInDelay=0 [2025-09-24 02:26:08.071] max_time_out=0 [2025-09-24 02:26:08.071] No splash screen [2025-09-24 02:26:08.071] stop dss Done [2025-09-24 02:26:08.071] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:26:08.119] /dev/mem opened. [2025-09-24 02:26:08.119] Memory mapped at address 0xffffa1ad5000. [2025-09-24 02:26:08.145] Read at address 0x00600018 (0xffffa1ad5018): 0x00000000 [2025-09-24 02:26:08.145] Write at address 0x00600018 (0xffffa1ad5018): 0x00400040, readback 0x00400040 [2025-09-24 02:26:08.169] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:26:08.169] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:26:08.297] Loaded PowerVR consumer services. [2025-09-24 02:26:08.418] 512+0 records in [2025-09-24 02:26:08.418] 512+0 records out [2025-09-24 02:26:08.418] Waiting data available... [2025-09-24 02:26:08.434] Starting syslogd/klogd: done [2025-09-24 02:26:08.450] DML Start [2025-09-24 02:26:08.626] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:26:08.833] DML res1: 0 [2025-09-24 02:26:09.305] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:26:09.305] Read Success [2025-09-24 02:26:09.305] Verifying certificate... [2025-09-24 02:26:09.529] Verified OK [2025-09-24 02:26:09.561] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:26:11.219] Verified OK [2025-09-24 02:26:11.219] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:26:11.822] Verified OK [2025-09-24 02:26:11.822] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:26:14.413] fs.protected_hardlinks = 1 [2025-09-24 02:26:14.413] fs.protected_symlinks = 1 [2025-09-24 02:26:14.428] kernel.modules_disabled = 1 [2025-09-24 02:26:14.619] [2025-09-24 02:26:14.619] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:26:15.915] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:26:23.717] SBL1:1210.0.1.0 [2025-09-24 02:26:23.765] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:26:25.332] SBL2:1210.0.1.0 [2025-09-24 02:26:25.380] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:26:25.492] j-A [2025-09-24 02:26:32.831] The R5 Autosar Classic is running [2025-09-24 02:26:32.862] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:26:32.862] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:26:33.469] INIT: version 2.96 booting [2025-09-24 02:26:33.580] INIT: Entering runlevel: 5 [2025-09-24 02:26:33.725] mtd28 attached [2025-09-24 02:26:33.741] mtd24 attached [2025-09-24 02:26:33.757] mtd32 attached [2025-09-24 02:26:33.805] ubi0:animations is mounted. [2025-09-24 02:26:33.805] RTNETLINK answers: File exists [2025-09-24 02:26:33.861] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:26:33.861] ubi2:dml_code is mounted. [2025-09-24 02:26:33.861] ubi1:textures is mounted. [2025-09-24 02:26:33.861] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:26:33.861] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:26:33.861] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:26:33.861] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:26:33.861] data.LB_FadeInType0=100 [2025-09-24 02:26:33.861] data.CHLH_FadeInType0=0 [2025-09-24 02:26:33.861] data.WU_FadeInDelay=0 [2025-09-24 02:26:33.861] max_time_out=0 [2025-09-24 02:26:33.861] No splash screen [2025-09-24 02:26:33.861] stop dss Done [2025-09-24 02:26:33.931] /dev/mem opened. [2025-09-24 02:26:33.931] Memory mapped at address 0xffff8321b000. [2025-09-24 02:26:33.931] Read at address 0x00600018 (0xffff8321b018): 0x00000000 [2025-09-24 02:26:33.931] Write at address 0x00600018 (0xffff8321b018): 0x00400040, readback 0x00400040 [2025-09-24 02:26:33.931] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:26:33.931] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:26:34.060] Loaded PowerVR consumer services. [2025-09-24 02:26:34.187] Waiting data available... [2025-09-24 02:26:34.203] 512+0 records in [2025-09-24 02:26:34.203] 512+0 records out [2025-09-24 02:26:34.219] Starting syslogd/klogd: done [2025-09-24 02:26:34.251] DML Start [2025-09-24 02:26:34.443] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:26:34.667] DML res1: 0 [2025-09-24 02:26:35.076] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:26:35.076] Read Success [2025-09-24 02:26:35.076] Verifying certificate... [2025-09-24 02:26:35.316] Verified OK [2025-09-24 02:26:35.332] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:26:37.016] Verified OK [2025-09-24 02:26:37.016] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:26:37.684] Verified OK [2025-09-24 02:26:37.684] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:26:40.355] fs.protected_hardlinks = 1 [2025-09-24 02:26:40.355] fs.protected_symlinks = 1 [2025-09-24 02:26:40.370] kernel.modules_disabled = 1 [2025-09-24 02:26:40.562] [2025-09-24 02:26:40.562] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:26:41.703] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:26:49.528] SBL1:1210.0.1.0 [2025-09-24 02:26:49.560] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:26:51.142] SBL2:1210.0.1.0 [2025-09-24 02:26:51.174] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:26:51.286] j-A [2025-09-24 02:26:58.659] The R5 Autosar Classic is running [2025-09-24 02:26:58.659] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:26:58.659] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:26:59.266] INIT: version 2.96 booting [2025-09-24 02:26:59.379] INIT: Entering runlevel: 5 [2025-09-24 02:26:59.522] mtd28 attached [2025-09-24 02:26:59.538] mtd24 attached [2025-09-24 02:26:59.554] mtd32 attached [2025-09-24 02:26:59.587] ubi0:animations is mounted. [2025-09-24 02:26:59.655] ubi2:dml_code is mounted. [2025-09-24 02:26:59.655] ubi1:textures is mounted. [2025-09-24 02:26:59.655] RTNETLINK answers: File exists [2025-09-24 02:26:59.655] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:26:59.655] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:26:59.655] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:26:59.655] data.LB_FadeInType0=100 [2025-09-24 02:26:59.655] data.CHLH_FadeInType0=0 [2025-09-24 02:26:59.655] data.WU_FadeInDelay=0 [2025-09-24 02:26:59.655] max_time_out=0 [2025-09-24 02:26:59.655] No splash screen [2025-09-24 02:26:59.655] stop dss Done [2025-09-24 02:26:59.655] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:26:59.655] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:26:59.686] /dev/mem opened. [2025-09-24 02:26:59.718] Memory mapped at address 0xffffbae6b000. [2025-09-24 02:26:59.718] Read at address 0x00600018 (0xffffbae6b018): 0x00000000 [2025-09-24 02:26:59.718] Write at address 0x00600018 (0xffffbae6b018): 0x00400040, readback 0x00400040 [2025-09-24 02:26:59.750] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:26:59.766] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:26:59.974] Loaded PowerVR consumer services. [2025-09-24 02:26:59.990] Waiting data available... [2025-09-24 02:27:00.006] 512+0 records in [2025-09-24 02:27:00.006] 512+0 records out [2025-09-24 02:27:00.038] Starting syslogd/klogd: done [2025-09-24 02:27:00.054] DML Start [2025-09-24 02:27:00.245] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:27:00.454] DML res1: 0 [2025-09-24 02:27:00.899] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:27:00.899] Read Success [2025-09-24 02:27:00.899] Verifying certificate... [2025-09-24 02:27:01.123] Verified OK [2025-09-24 02:27:01.139] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:27:02.769] Verified OK [2025-09-24 02:27:02.769] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:27:03.448] Verified OK [2025-09-24 02:27:03.448] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:27:06.069] fs.protected_hardlinks = 1 [2025-09-24 02:27:06.069] fs.protected_symlinks = 1 [2025-09-24 02:27:06.085] kernel.modules_disabled = 1 [2025-09-24 02:27:06.277] [2025-09-24 02:27:06.277] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:27:07.492] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:27:15.354] SBL1:1210.0.1.0 [2025-09-24 02:27:15.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:27:16.968] SBL2:1210.0.1.0 [2025-09-24 02:27:17.000] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:27:17.113] j-A [2025-09-24 02:27:24.488] The R5 Autosar Classic is running [2025-09-24 02:27:24.488] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:27:24.488] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:27:25.096] INIT: version 2.96 booting [2025-09-24 02:27:25.207] INIT: Entering runlevel: 5 [2025-09-24 02:27:25.352] mtd24 attached [2025-09-24 02:27:25.367] mtd28 attached [2025-09-24 02:27:25.383] mtd32 attached [2025-09-24 02:27:25.431] ubi0:textures is mounted. [2025-09-24 02:27:25.431] RTNETLINK answers: File exists [2025-09-24 02:27:25.488] ubi2:dml_code is mounted. [2025-09-24 02:27:25.488] ubi1:animations is mounted. [2025-09-24 02:27:25.488] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:27:25.488] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:27:25.488] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:27:25.488] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:27:25.488] data.LB_FadeInType0=100 [2025-09-24 02:27:25.488] data.CHLH_FadeInType0=0 [2025-09-24 02:27:25.488] data.WU_FadeInDelay=0 [2025-09-24 02:27:25.488] max_time_out=0 [2025-09-24 02:27:25.488] No splash screen [2025-09-24 02:27:25.488] stop dss Done [2025-09-24 02:27:25.488] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:27:25.521] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:27:25.558] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:27:25.558] /dev/mem opened. [2025-09-24 02:27:25.558] Memory mapped at address 0xffff8b4a1000. [2025-09-24 02:27:25.558] Read at address 0x00600018 (0xffff8b4a1018): 0x00000000 [2025-09-24 02:27:25.558] Write at address 0x00600018 (0xffff8b4a1018): 0x00400040, readback 0x00400040 [2025-09-24 02:27:25.686] Loaded PowerVR consumer services. [2025-09-24 02:27:25.830] Waiting data available... [2025-09-24 02:27:25.830] 512+0 records in [2025-09-24 02:27:25.846] 512+0 records out [2025-09-24 02:27:25.862] Starting syslogd/klogd: done [2025-09-24 02:27:25.878] DML Start [2025-09-24 02:27:26.038] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:27:26.278] DML res1: 0 [2025-09-24 02:27:26.733] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:27:26.733] Read Success [2025-09-24 02:27:26.733] Verifying certificate... [2025-09-24 02:27:26.956] Verified OK [2025-09-24 02:27:26.972] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:27:28.835] Verified OK [2025-09-24 02:27:28.835] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:27:29.389] Verified OK [2025-09-24 02:27:29.389] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:27:31.867] fs.protected_hardlinks = 1 [2025-09-24 02:27:31.867] fs.protected_symlinks = 1 [2025-09-24 02:27:31.883] kernel.modules_disabled = 1 [2025-09-24 02:27:32.075] [2025-09-24 02:27:32.075] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:27:33.319] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:27:41.157] SBL1:1210.0.1.0 [2025-09-24 02:27:41.189] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:27:42.772] SBL2:1210.0.1.0 [2025-09-24 02:27:42.804] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:27:42.916] j-A [2025-09-24 02:27:50.288] The R5 Autosar Classic is running [2025-09-24 02:27:50.288] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:27:50.288] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:27:50.895] INIT: version 2.96 booting [2025-09-24 02:27:51.007] INIT: Entering runlevel: 5 [2025-09-24 02:27:51.168] mtd28 attached [2025-09-24 02:27:51.168] mtd32 attached [2025-09-24 02:27:51.183] mtd24 attached [2025-09-24 02:27:51.215] ubi0:animations is mounted. [2025-09-24 02:27:51.232] RTNETLINK answers: File exists [2025-09-24 02:27:51.273] ubi1:dml_code is mounted. [2025-09-24 02:27:51.273] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:27:51.273] ubi2:textures is mounted. [2025-09-24 02:27:51.273] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:27:51.273] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:27:51.273] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:27:51.273] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:27:51.295] data.LB_FadeInType0=100 [2025-09-24 02:27:51.295] data.CHLH_FadeInType0=0 [2025-09-24 02:27:51.295] data.WU_FadeInDelay=0 [2025-09-24 02:27:51.295] max_time_out=0 [2025-09-24 02:27:51.295] No splash screen [2025-09-24 02:27:51.295] stop dss Done [2025-09-24 02:27:51.375] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:27:51.375] /dev/mem opened. [2025-09-24 02:27:51.375] Memory mapped at address 0xffff92dad000. [2025-09-24 02:27:51.375] Read at address 0x00600018 (0xffff92dad018): 0x00000000 [2025-09-24 02:27:51.375] Write at address 0x00600018 (0xffff92dad018): 0x00400040, readback 0x00400040 [2025-09-24 02:27:51.375] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:27:51.614] Loaded PowerVR consumer services. [2025-09-24 02:27:51.614] Waiting data available... [2025-09-24 02:27:51.646] 512+0 records in [2025-09-24 02:27:51.646] 512+0 records out [2025-09-24 02:27:51.678] Starting syslogd/klogd: done [2025-09-24 02:27:51.694] DML Start [2025-09-24 02:27:51.822] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:27:52.047] DML res1: 0 [2025-09-24 02:27:52.606] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:27:52.622] Read Success [2025-09-24 02:27:52.622] Verifying certificate... [2025-09-24 02:27:52.862] Verified OK [2025-09-24 02:27:52.878] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:27:54.604] Verified OK [2025-09-24 02:27:54.604] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:27:55.164] Verified OK [2025-09-24 02:27:55.164] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:27:57.738] fs.protected_hardlinks = 1 [2025-09-24 02:27:57.738] fs.protected_symlinks = 1 [2025-09-24 02:27:57.738] kernel.modules_disabled = 1 [2025-09-24 02:27:57.929] [2025-09-24 02:27:57.929] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:27:59.160] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:28:06.948] SBL1:1210.0.1.0 [2025-09-24 02:28:06.996] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:28:08.562] SBL2:1210.0.1.0 [2025-09-24 02:28:08.610] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:28:08.707] j-A [2025-09-24 02:28:16.062] The R5 Autosar Classic is running [2025-09-24 02:28:16.084] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:28:16.084] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:28:16.691] INIT: version 2.96 booting [2025-09-24 02:28:16.803] INIT: Entering runlevel: 5 [2025-09-24 02:28:16.963] mtd28 attached [2025-09-24 02:28:16.963] mtd24 attached [2025-09-24 02:28:16.995] mtd32 attached [2025-09-24 02:28:17.027] RTNETLINK answers: File exists [2025-09-24 02:28:17.067] ubi0:animations is mounted. [2025-09-24 02:28:17.067] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:28:17.067] ubi1:textures is mounted. [2025-09-24 02:28:17.067] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:28:17.067] ubi2:dml_code is mounted. [2025-09-24 02:28:17.067] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:28:17.067] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:28:17.067] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:28:17.094] data.LB_FadeInType0=100 [2025-09-24 02:28:17.094] data.CHLH_FadeInType0=0 [2025-09-24 02:28:17.094] data.WU_FadeInDelay=0 [2025-09-24 02:28:17.094] max_time_out=0 [2025-09-24 02:28:17.094] No splash screen [2025-09-24 02:28:17.094] stop dss Done [2025-09-24 02:28:17.126] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:28:17.165] /dev/mem opened. [2025-09-24 02:28:17.165] Memory mapped at address 0xffff8b623000. [2025-09-24 02:28:17.165] Read at address 0x00600018 (0xffff8b623018): 0x00000000 [2025-09-24 02:28:17.165] Write at address 0x00600018 (0xffff8b623018): 0x00400040, readback 0x00400040 [2025-09-24 02:28:17.165] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:28:17.293] Loaded PowerVR consumer services. [2025-09-24 02:28:17.432] Waiting data available... [2025-09-24 02:28:17.432] 512+0 records in [2025-09-24 02:28:17.432] 512+0 records out [2025-09-24 02:28:17.464] Starting syslogd/klogd: done [2025-09-24 02:28:17.480] DML Start [2025-09-24 02:28:17.656] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:28:17.880] DML res1: 0 [2025-09-24 02:28:18.384] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:28:18.384] Read Success [2025-09-24 02:28:18.384] Verifying certificate... [2025-09-24 02:28:18.609] Verified OK [2025-09-24 02:28:18.625] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:28:20.287] Verified OK [2025-09-24 02:28:20.287] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:28:20.919] Verified OK [2025-09-24 02:28:20.919] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:28:23.509] fs.protected_hardlinks = 1 [2025-09-24 02:28:23.509] fs.protected_symlinks = 1 [2025-09-24 02:28:23.525] kernel.modules_disabled = 1 [2025-09-24 02:28:23.717] [2025-09-24 02:28:23.717] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:28:24.955] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:28:32.751] SBL1:1210.0.1.0 [2025-09-24 02:28:32.799] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:28:34.365] SBL2:1210.0.1.0 [2025-09-24 02:28:34.413] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:28:34.509] j-A [2025-09-24 02:28:41.865] The R5 Autosar Classic is running [2025-09-24 02:28:41.889] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:28:41.889] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:28:42.496] INIT: version 2.96 booting [2025-09-24 02:28:42.608] INIT: Entering runlevel: 5 [2025-09-24 02:28:42.753] mtd28 attached [2025-09-24 02:28:42.769] mtd24 attached [2025-09-24 02:28:42.784] mtd32 attached [2025-09-24 02:28:42.832] ubi0:animations is mounted. [2025-09-24 02:28:42.832] RTNETLINK answers: File exists [2025-09-24 02:28:42.893] ubi1:textures is mounted. [2025-09-24 02:28:42.893] ubi2:dml_code is mounted. [2025-09-24 02:28:42.893] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:28:42.893] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:28:42.893] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:28:42.893] data.LB_FadeInType0=100 [2025-09-24 02:28:42.893] data.CHLH_FadeInType0=0 [2025-09-24 02:28:42.893] data.WU_FadeInDelay=0 [2025-09-24 02:28:42.893] max_time_out=0 [2025-09-24 02:28:42.893] No splash screen [2025-09-24 02:28:42.893] stop dss Done [2025-09-24 02:28:42.893] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:28:42.893] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:28:42.960] /dev/mem opened. [2025-09-24 02:28:42.960] Memory mapped at address 0xffffbd2a5000. [2025-09-24 02:28:42.960] Read at address 0x00600018 (0xffffbd2a5018): 0x00000000 [2025-09-24 02:28:42.960] Write at address 0x00600018 (0xffffbd2a5018): 0x00400040, readback 0x00400040 [2025-09-24 02:28:42.992] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:28:43.008] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:28:43.232] Loaded PowerVR consumer services. [2025-09-24 02:28:43.264] Waiting data available... [2025-09-24 02:28:43.296] 512+0 records in [2025-09-24 02:28:43.296] 512+0 records out [2025-09-24 02:28:43.328] Starting syslogd/klogd: done [2025-09-24 02:28:43.344] DML Start [2025-09-24 02:28:43.504] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:28:43.727] DML res1: 0 [2025-09-24 02:28:44.144] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:28:44.160] Read Success [2025-09-24 02:28:44.160] Verifying certificate... [2025-09-24 02:28:44.415] Verified OK [2025-09-24 02:28:44.431] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:28:45.958] Verified OK [2025-09-24 02:28:45.958] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:28:46.655] Verified OK [2025-09-24 02:28:46.655] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:28:49.341] fs.protected_hardlinks = 1 [2025-09-24 02:28:49.341] fs.protected_symlinks = 1 [2025-09-24 02:28:49.356] kernel.modules_disabled = 1 [2025-09-24 02:28:49.548] [2025-09-24 02:28:49.548] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:28:50.806] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:28:58.568] SBL1:1210.0.1.0 [2025-09-24 02:28:58.600] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:29:00.183] SBL2:1210.0.1.0 [2025-09-24 02:29:00.215] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:29:00.326] j-A [2025-09-24 02:29:07.699] The R5 Autosar Classic is running [2025-09-24 02:29:07.699] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:29:07.699] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:29:08.306] INIT: version 2.96 booting [2025-09-24 02:29:08.418] INIT: Entering runlevel: 5 [2025-09-24 02:29:08.578] mtd28 attached [2025-09-24 02:29:08.578] mtd32 attached [2025-09-24 02:29:08.594] mtd24 attached [2025-09-24 02:29:08.610] ubi0:animations is mounted. [2025-09-24 02:29:08.642] RTNETLINK answers: File exists [2025-09-24 02:29:08.642] ubi2:textures is mounted. [2025-09-24 02:29:08.703] ubi1:dml_code is mounted. [2025-09-24 02:29:08.703] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:29:08.703] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:29:08.703] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:29:08.703] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:29:08.703] data.LB_FadeInType0=100 [2025-09-24 02:29:08.703] data.CHLH_FadeInType0=0 [2025-09-24 02:29:08.703] data.WU_FadeInDelay=0 [2025-09-24 02:29:08.703] max_time_out=0 [2025-09-24 02:29:08.703] No splash screen [2025-09-24 02:29:08.703] stop dss Done [2025-09-24 02:29:08.703] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:29:08.788] /dev/mem opened. [2025-09-24 02:29:08.788] Memory mapped at address 0xffffa9cb1000. [2025-09-24 02:29:08.788] Read at address 0x00600018 (0xffffa9cb1018): 0x00000000 [2025-09-24 02:29:08.788] Write at address 0x00600018 (0xffffa9cb1018): 0x00400040, readback 0x00400040 [2025-09-24 02:29:08.788] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:29:08.788] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:29:08.868] Loaded PowerVR consumer services. [2025-09-24 02:29:09.028] 512+0 records in [2025-09-24 02:29:09.044] 512+0 records out [2025-09-24 02:29:09.044] Waiting data available... [2025-09-24 02:29:09.076] Starting syslogd/klogd: done [2025-09-24 02:29:09.092] DML Start [2025-09-24 02:29:09.267] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:29:09.492] DML res1: 0 [2025-09-24 02:29:09.949] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:29:09.949] Read Success [2025-09-24 02:29:09.949] Verifying certificate... [2025-09-24 02:29:10.174] Verified OK [2025-09-24 02:29:10.189] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:29:11.853] Verified OK [2025-09-24 02:29:11.853] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:29:12.481] Verified OK [2025-09-24 02:29:12.481] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:29:15.152] fs.protected_hardlinks = 1 [2025-09-24 02:29:15.168] fs.protected_symlinks = 1 [2025-09-24 02:29:15.168] kernel.modules_disabled = 1 [2025-09-24 02:29:15.375] [2025-09-24 02:29:15.375] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:29:16.558] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:29:24.367] SBL1:1210.0.1.0 [2025-09-24 02:29:24.415] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:29:25.982] SBL2:1210.0.1.0 [2025-09-24 02:29:26.029] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:29:26.125] j-A [2025-09-24 02:29:33.480] The R5 Autosar Classic is running [2025-09-24 02:29:33.480] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:29:33.501] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:29:34.108] INIT: version 2.96 booting [2025-09-24 02:29:34.220] INIT: Entering runlevel: 5 [2025-09-24 02:29:34.364] mtd24 attached [2025-09-24 02:29:34.379] mtd32 attached [2025-09-24 02:29:34.395] mtd28 attached [2025-09-24 02:29:34.411] ubi0:textures is mounted. [2025-09-24 02:29:34.427] ubi1:dml_code is mounted. [2025-09-24 02:29:34.443] ubi2:animations is mounted. [2025-09-24 02:29:34.498] RTNETLINK answers: File exists [2025-09-24 02:29:34.498] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:29:34.498] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:29:34.498] data.LB_FadeInType0=100 [2025-09-24 02:29:34.498] data.CHLH_FadeInType0=0 [2025-09-24 02:29:34.498] data.WU_FadeInDelay=0 [2025-09-24 02:29:34.498] max_time_out=0 [2025-09-24 02:29:34.498] No splash screen [2025-09-24 02:29:34.498] stop dss Done [2025-09-24 02:29:34.498] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:29:34.498] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:29:34.498] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:29:34.557] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:29:34.557] /dev/mem opened. [2025-09-24 02:29:34.557] Memory mapped at address 0xffffb7662000. [2025-09-24 02:29:34.557] Read at address 0x00600018 (0xffffb7662018): 0x00000000 [2025-09-24 02:29:34.557] Write at address 0x00600018 (0xffffb7662018): 0x00400040, readback 0x00400040 [2025-09-24 02:29:34.557] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:29:34.796] Loaded PowerVR consumer services. [2025-09-24 02:29:34.828] Waiting data available... [2025-09-24 02:29:34.860] 512+0 records in [2025-09-24 02:29:34.860] 512+0 records out [2025-09-24 02:29:34.892] Starting syslogd/klogd: done [2025-09-24 02:29:34.924] DML Start [2025-09-24 02:29:35.116] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:29:35.340] DML res1: 0 [2025-09-24 02:29:35.739] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:29:35.760] Read Success [2025-09-24 02:29:35.760] Verifying certificate... [2025-09-24 02:29:36.000] Verified OK [2025-09-24 02:29:36.016] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:29:37.706] Verified OK [2025-09-24 02:29:37.706] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:29:38.338] Verified OK [2025-09-24 02:29:38.338] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:29:41.024] fs.protected_hardlinks = 1 [2025-09-24 02:29:41.040] fs.protected_symlinks = 1 [2025-09-24 02:29:41.040] kernel.modules_disabled = 1 [2025-09-24 02:29:41.231] [2025-09-24 02:29:41.231] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:29:42.333] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:29:50.176] SBL1:1210.0.1.0 [2025-09-24 02:29:50.224] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:29:51.791] SBL2:1210.0.1.0 [2025-09-24 02:29:51.839] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:29:51.935] j-A [2025-09-24 02:29:59.289] The R5 Autosar Classic is running [2025-09-24 02:29:59.314] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:29:59.314] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:29:59.921] INIT: version 2.96 booting [2025-09-24 02:30:00.033] INIT: Entering runlevel: 5 [2025-09-24 02:30:00.177] mtd24 attached [2025-09-24 02:30:00.193] mtd28 attached [2025-09-24 02:30:00.209] mtd32 attached [2025-09-24 02:30:00.257] RTNETLINK answers: File exists [2025-09-24 02:30:00.257] ubi0:textures is mounted. [2025-09-24 02:30:00.257] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:30:00.308] ubi1:animations is mounted. [2025-09-24 02:30:00.308] ubi2:dml_code is mounted. [2025-09-24 02:30:00.308] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:30:00.308] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:30:00.308] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:30:00.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:30:00.308] data.LB_FadeInType0=100 [2025-09-24 02:30:00.308] data.CHLH_FadeInType0=0 [2025-09-24 02:30:00.308] data.WU_FadeInDelay=0 [2025-09-24 02:30:00.308] max_time_out=0 [2025-09-24 02:30:00.308] No splash screen [2025-09-24 02:30:00.308] stop dss Done [2025-09-24 02:30:00.381] /dev/mem opened. [2025-09-24 02:30:00.381] Memory mapped at address 0xffffb287f000. [2025-09-24 02:30:00.381] Read at address 0x00600018 (0xffffb287f018): 0x00000000 [2025-09-24 02:30:00.381] Write at address 0x00600018 (0xffffb287f018): 0x00400040, readback 0x00400040 [2025-09-24 02:30:00.381] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:30:00.381] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:30:00.525] Loaded PowerVR consumer services. [2025-09-24 02:30:00.653] Waiting data available... [2025-09-24 02:30:00.669] 512+0 records in [2025-09-24 02:30:00.669] 512+0 records out [2025-09-24 02:30:00.685] Starting syslogd/klogd: done [2025-09-24 02:30:00.716] DML Start [2025-09-24 02:30:00.909] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:30:01.132] DML res1: 0 [2025-09-24 02:30:01.517] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:30:01.538] Read Success [2025-09-24 02:30:01.538] Verifying certificate... [2025-09-24 02:30:01.761] Verified OK [2025-09-24 02:30:01.777] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:30:03.376] Verified OK [2025-09-24 02:30:03.376] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:30:04.028] Verified OK [2025-09-24 02:30:04.028] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:30:06.746] fs.protected_hardlinks = 1 [2025-09-24 02:30:06.746] fs.protected_symlinks = 1 [2025-09-24 02:30:06.762] kernel.modules_disabled = 1 [2025-09-24 02:30:06.969] [2025-09-24 02:30:06.969] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:30:08.154] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:30:16.001] SBL1:1210.0.1.0 [2025-09-24 02:30:16.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:30:17.615] SBL2:1210.0.1.0 [2025-09-24 02:30:17.647] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:30:17.760] j-A [2025-09-24 02:30:25.130] The R5 Autosar Classic is running [2025-09-24 02:30:25.130] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:30:25.130] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:30:25.738] INIT: version 2.96 booting [2025-09-24 02:30:25.849] INIT: Entering runlevel: 5 [2025-09-24 02:30:25.993] mtd24 attached [2025-09-24 02:30:26.009] mtd28 attached [2025-09-24 02:30:26.025] mtd32 attached [2025-09-24 02:30:26.041] ubi0:textures is mounted. [2025-09-24 02:30:26.073] ubi1:animations is mounted. [2025-09-24 02:30:26.073] RTNETLINK answers: File exists [2025-09-24 02:30:26.097] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:30:26.097] ubi2:dml_code is mounted. [2025-09-24 02:30:26.097] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:30:26.129] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:30:26.129] data.LB_FadeInType0=100 [2025-09-24 02:30:26.129] data.CHLH_FadeInType0=0 [2025-09-24 02:30:26.129] data.WU_FadeInDelay=0 [2025-09-24 02:30:26.129] max_time_out=0 [2025-09-24 02:30:26.129] No splash screen [2025-09-24 02:30:26.129] stop dss Done [2025-09-24 02:30:26.129] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:30:26.129] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:30:26.161] /dev/mem opened. [2025-09-24 02:30:26.193] Memory mapped at address 0xffff88713000. [2025-09-24 02:30:26.193] Read at address 0x00600018 (0xffff88713018): 0x00000000 [2025-09-24 02:30:26.193] Write at address 0x00600018 (0xffff88713018): 0x00400040, readback 0x00400040 [2025-09-24 02:30:26.226] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:30:26.242] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:30:26.449] Loaded PowerVR consumer services. [2025-09-24 02:30:26.465] Waiting data available... [2025-09-24 02:30:26.481] 512+0 records in [2025-09-24 02:30:26.481] 512+0 records out [2025-09-24 02:30:26.529] Starting syslogd/klogd: done [2025-09-24 02:30:26.545] DML Start [2025-09-24 02:30:26.689] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:30:26.897] DML res1: 0 [2025-09-24 02:30:27.376] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:30:27.376] Read Success [2025-09-24 02:30:27.376] Verifying certificate... [2025-09-24 02:30:27.711] Verified OK [2025-09-24 02:30:27.743] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:30:29.348] Verified OK [2025-09-24 02:30:29.348] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:30:29.854] Verified OK [2025-09-24 02:30:29.854] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:30:32.540] fs.protected_hardlinks = 1 [2025-09-24 02:30:32.540] fs.protected_symlinks = 1 [2025-09-24 02:30:32.556] kernel.modules_disabled = 1 [2025-09-24 02:30:32.748] [2025-09-24 02:30:32.748] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:30:33.975] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:30:41.797] SBL1:1210.0.1.0 [2025-09-24 02:30:41.829] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:30:43.411] SBL2:1210.0.1.0 [2025-09-24 02:30:43.443] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:30:43.555] j-A [2025-09-24 02:30:50.909] The R5 Autosar Classic is running [2025-09-24 02:30:50.909] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:30:50.930] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:30:51.537] INIT: version 2.96 booting [2025-09-24 02:30:51.649] INIT: Entering runlevel: 5 [2025-09-24 02:30:51.794] mtd24 attached [2025-09-24 02:30:51.810] mtd28 attached [2025-09-24 02:30:51.826] mtd32 attached [2025-09-24 02:30:51.857] ubi0:textures is mounted. [2025-09-24 02:30:51.926] RTNETLINK answers: File exists [2025-09-24 02:30:51.926] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:30:51.926] ubi1:animations is mounted. [2025-09-24 02:30:51.926] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:30:51.926] ubi2:dml_code is mounted. [2025-09-24 02:30:51.926] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:30:51.926] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:30:51.926] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:30:51.926] data.LB_FadeInType0=100 [2025-09-24 02:30:51.926] data.CHLH_FadeInType0=0 [2025-09-24 02:30:51.926] data.WU_FadeInDelay=0 [2025-09-24 02:30:51.926] max_time_out=0 [2025-09-24 02:30:51.926] No splash screen [2025-09-24 02:30:51.926] stop dss Done [2025-09-24 02:30:51.974] /dev/mem opened. [2025-09-24 02:30:51.974] Memory mapped at address 0xffff8cc3c000. [2025-09-24 02:30:52.011] Read at address 0x00600018 (0xffff8cc3c018): 0x00000000 [2025-09-24 02:30:52.011] Write at address 0x00600018 (0xffff8cc3c018): 0x00400040, readback 0x00400040 [2025-09-24 02:30:52.011] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:30:52.011] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:30:52.155] Loaded PowerVR consumer services. [2025-09-24 02:30:52.281] Waiting data available... [2025-09-24 02:30:52.281] 512+0 records in [2025-09-24 02:30:52.281] 512+0 records out [2025-09-24 02:30:52.296] Starting syslogd/klogd: done [2025-09-24 02:30:52.313] DML Start [2025-09-24 02:30:52.473] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:30:52.713] DML res1: 0 [2025-09-24 02:30:53.160] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:30:53.160] Read Success [2025-09-24 02:30:53.176] Verifying certificate... [2025-09-24 02:30:53.416] Verified OK [2025-09-24 02:30:53.432] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:30:55.107] Verified OK [2025-09-24 02:30:55.107] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:30:55.775] Verified OK [2025-09-24 02:30:55.775] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:30:58.395] fs.protected_hardlinks = 1 [2025-09-24 02:30:58.395] fs.protected_symlinks = 1 [2025-09-24 02:30:58.395] kernel.modules_disabled = 1 [2025-09-24 02:30:58.587] [2025-09-24 02:30:58.587] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:30:59.733] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:31:07.672] SBL1:1210.0.1.0 [2025-09-24 02:31:07.720] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:31:09.287] SBL2:1210.0.1.0 [2025-09-24 02:31:09.335] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:31:09.431] j-A [2025-09-24 02:31:16.785] The R5 Autosar Classic is running [2025-09-24 02:31:16.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:31:16.807] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:31:17.415] INIT: version 2.96 booting [2025-09-24 02:31:17.528] INIT: Entering runlevel: 5 [2025-09-24 02:31:17.671] mtd28 attached [2025-09-24 02:31:17.687] mtd24 attached [2025-09-24 02:31:17.703] mtd32 attached [2025-09-24 02:31:17.735] ubi0:animations is mounted. [2025-09-24 02:31:17.751] ubi1:textures is mounted. [2025-09-24 02:31:17.751] ubi2:dml_code is mounted. [2025-09-24 02:31:17.767] RTNETLINK answers: File exists [2025-09-24 02:31:17.824] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:31:17.824] data.LB_FadeInType0=100 [2025-09-24 02:31:17.824] data.CHLH_FadeInType0=0 [2025-09-24 02:31:17.824] data.WU_FadeInDelay=0 [2025-09-24 02:31:17.824] max_time_out=0 [2025-09-24 02:31:17.824] No splash screen [2025-09-24 02:31:17.824] stop dss Done [2025-09-24 02:31:17.824] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:31:17.824] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:31:17.824] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:31:17.824] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:31:17.856] /dev/mem opened. [2025-09-24 02:31:17.888] Memory mapped at address 0xffff96a6e000. [2025-09-24 02:31:17.888] Read at address 0x00600018 (0xffff96a6e018): 0x00000000 [2025-09-24 02:31:17.888] Write at address 0x00600018 (0xffff96a6e018): 0x00400040, readback 0x00400040 [2025-09-24 02:31:17.888] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:31:17.910] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:31:17.990] Loaded PowerVR consumer services. [2025-09-24 02:31:18.146] Waiting data available... [2025-09-24 02:31:18.146] 512+0 records in [2025-09-24 02:31:18.146] 512+0 records out [2025-09-24 02:31:18.177] Starting syslogd/klogd: done [2025-09-24 02:31:18.194] DML Start [2025-09-24 02:31:18.370] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:31:18.610] DML res1: 0 [2025-09-24 02:31:19.110] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:31:19.110] Read Success [2025-09-24 02:31:19.110] Verifying certificate... [2025-09-24 02:31:19.334] Verified OK [2025-09-24 02:31:19.334] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:31:21.165] Verified OK [2025-09-24 02:31:21.165] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:31:21.707] Verified OK [2025-09-24 02:31:21.707] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:31:24.185] fs.protected_hardlinks = 1 [2025-09-24 02:31:24.201] fs.protected_symlinks = 1 [2025-09-24 02:31:24.201] kernel.modules_disabled = 1 [2025-09-24 02:31:24.392] [2025-09-24 02:31:24.392] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:31:25.608] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:31:33.496] SBL1:1210.0.1.0 [2025-09-24 02:31:33.527] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:31:35.110] SBL2:1210.0.1.0 [2025-09-24 02:31:35.142] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:31:35.254] j-A [2025-09-24 02:31:42.631] The R5 Autosar Classic is running [2025-09-24 02:31:42.631] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:31:42.631] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:31:43.238] INIT: version 2.96 booting [2025-09-24 02:31:43.350] INIT: Entering runlevel: 5 [2025-09-24 02:31:43.510] mtd28 attached [2025-09-24 02:31:43.510] mtd24 attached [2025-09-24 02:31:43.542] mtd32 attached [2025-09-24 02:31:43.558] ubi0:animations is mounted. [2025-09-24 02:31:43.574] ubi1:textures is mounted. [2025-09-24 02:31:43.590] RTNETLINK answers: File exists [2025-09-24 02:31:43.590] ubi2:dml_code is mounted. [2025-09-24 02:31:43.648] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:31:43.648] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:31:43.648] data.LB_FadeInType0=100 [2025-09-24 02:31:43.648] data.CHLH_FadeInType0=0 [2025-09-24 02:31:43.648] data.WU_FadeInDelay=0 [2025-09-24 02:31:43.648] max_time_out=0 [2025-09-24 02:31:43.648] No splash screen [2025-09-24 02:31:43.648] stop dss Done [2025-09-24 02:31:43.648] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:31:43.648] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:31:43.648] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:31:43.711] /dev/mem opened. [2025-09-24 02:31:43.711] Memory mapped at address 0xffff9d200000. [2025-09-24 02:31:43.711] Read at address 0x00600018 (0xffff9d200018): 0x00000000 [2025-09-24 02:31:43.711] Write at address 0x00600018 (0xffff9d200018): 0x00400040, readback 0x00400040 [2025-09-24 02:31:43.745] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:31:43.745] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:31:43.994] Waiting data available... [2025-09-24 02:31:43.994] Loaded PowerVR consumer services. [2025-09-24 02:31:44.010] 512+0 records in [2025-09-24 02:31:44.010] 512+0 records out [2025-09-24 02:31:44.058] Starting syslogd/klogd: done [2025-09-24 02:31:44.074] DML Start [2025-09-24 02:31:44.217] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:31:44.393] DML res1: 0 [2025-09-24 02:31:44.929] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:31:44.929] Read Success [2025-09-24 02:31:44.929] Verifying certificate... [2025-09-24 02:31:45.185] Verified OK [2025-09-24 02:31:45.201] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:31:46.975] Verified OK [2025-09-24 02:31:46.975] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:31:47.519] Verified OK [2025-09-24 02:31:47.535] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:31:50.029] fs.protected_hardlinks = 1 [2025-09-24 02:31:50.029] fs.protected_symlinks = 1 [2025-09-24 02:31:50.045] kernel.modules_disabled = 1 [2025-09-24 02:31:50.237] [2025-09-24 02:31:50.237] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:31:51.500] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:31:59.286] SBL1:1210.0.1.0 [2025-09-24 02:31:59.318] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:32:00.900] SBL2:1210.0.1.0 [2025-09-24 02:32:00.932] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:32:01.045] j-A [2025-09-24 02:32:08.419] The R5 Autosar Classic is running [2025-09-24 02:32:08.419] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:32:08.419] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:32:09.027] INIT: version 2.96 booting [2025-09-24 02:32:09.139] INIT: Entering runlevel: 5 [2025-09-24 02:32:09.283] mtd24 attached [2025-09-24 02:32:09.299] mtd32 attached [2025-09-24 02:32:09.299] mtd28 attached [2025-09-24 02:32:09.331] ubi0:textures is mounted. [2025-09-24 02:32:09.414] RTNETLINK answers: File exists [2025-09-24 02:32:09.414] ubi1:dml_code is mounted. [2025-09-24 02:32:09.414] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:32:09.414] ubi2:animations is mounted. [2025-09-24 02:32:09.414] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:32:09.414] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:32:09.414] data.LB_FadeInType0=100 [2025-09-24 02:32:09.414] data.CHLH_FadeInType0=0 [2025-09-24 02:32:09.414] data.WU_FadeInDelay=0 [2025-09-24 02:32:09.414] max_time_out=0 [2025-09-24 02:32:09.414] No splash screen [2025-09-24 02:32:09.414] stop dss Done [2025-09-24 02:32:09.414] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:32:09.414] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:32:09.492] /dev/mem opened. [2025-09-24 02:32:09.492] Memory mapped at address 0xffffb2e07000. [2025-09-24 02:32:09.492] Read at address 0x00600018 (0xffffb2e07018): 0x00000000 [2025-09-24 02:32:09.492] Write at address 0x00600018 (0xffffb2e07018): 0x00400040, readback 0x00400040 [2025-09-24 02:32:09.492] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:32:09.492] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:32:09.651] Loaded PowerVR consumer services. [2025-09-24 02:32:09.748] Waiting data available... [2025-09-24 02:32:09.764] 512+0 records in [2025-09-24 02:32:09.780] 512+0 records out [2025-09-24 02:32:09.811] Starting syslogd/klogd: done [2025-09-24 02:32:09.844] DML Start [2025-09-24 02:32:10.004] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:32:10.227] DML res1: 0 [2025-09-24 02:32:10.668] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:32:10.668] Read Success [2025-09-24 02:32:10.668] Verifying certificate... [2025-09-24 02:32:10.892] Verified OK [2025-09-24 02:32:10.908] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:32:12.458] Verified OK [2025-09-24 02:32:12.474] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:32:13.058] Verified OK [2025-09-24 02:32:13.058] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:32:15.887] fs.protected_hardlinks = 1 [2025-09-24 02:32:15.916] fs.protected_symlinks = 1 [2025-09-24 02:32:15.916] kernel.modules_disabled = 1 [2025-09-24 02:32:16.092] [2025-09-24 02:32:16.092] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:32:17.317] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:32:25.113] SBL1:1210.0.1.0 [2025-09-24 02:32:25.161] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:32:26.728] SBL2:1210.0.1.0 [2025-09-24 02:32:26.775] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:32:26.887] j-A [2025-09-24 02:32:34.227] The R5 Autosar Classic is running [2025-09-24 02:32:34.252] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:32:34.252] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:32:34.860] INIT: version 2.96 booting [2025-09-24 02:32:34.972] INIT: Entering runlevel: 5 [2025-09-24 02:32:35.132] mtd24 attached [2025-09-24 02:32:35.132] mtd28 attached [2025-09-24 02:32:35.148] mtd32 attached [2025-09-24 02:32:35.195] ubi0:textures is mounted. [2025-09-24 02:32:35.195] RTNETLINK answers: File exists [2025-09-24 02:32:35.259] ubi2:dml_code is mounted. [2025-09-24 02:32:35.259] ubi1:animations is mounted. [2025-09-24 02:32:35.259] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:32:35.259] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:32:35.259] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:32:35.259] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:32:35.259] data.LB_FadeInType0=100 [2025-09-24 02:32:35.259] data.CHLH_FadeInType0=0 [2025-09-24 02:32:35.259] data.WU_FadeInDelay=0 [2025-09-24 02:32:35.259] max_time_out=0 [2025-09-24 02:32:35.259] No splash screen [2025-09-24 02:32:35.259] stop dss Done [2025-09-24 02:32:35.259] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:32:35.343] /dev/mem opened. [2025-09-24 02:32:35.343] Memory mapped at address 0xffffb3342000. [2025-09-24 02:32:35.343] Read at address 0x00600018 (0xffffb3342018): 0x00000000 [2025-09-24 02:32:35.343] Write at address 0x00600018 (0xffffb3342018): 0x00400040, readback 0x00400040 [2025-09-24 02:32:35.343] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:32:35.343] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:32:35.438] Loaded PowerVR consumer services. [2025-09-24 02:32:35.599] Waiting data available... [2025-09-24 02:32:35.599] 512+0 records in [2025-09-24 02:32:35.599] 512+0 records out [2025-09-24 02:32:35.646] Starting syslogd/klogd: done [2025-09-24 02:32:35.662] DML Start [2025-09-24 02:32:35.855] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:32:36.078] DML res1: 0 [2025-09-24 02:32:36.478] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:32:36.478] Read Success [2025-09-24 02:32:36.494] Verifying certificate... [2025-09-24 02:32:36.718] Verified OK [2025-09-24 02:32:36.733] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:32:38.380] Verified OK [2025-09-24 02:32:38.380] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:32:38.986] Verified OK [2025-09-24 02:32:38.986] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:32:41.672] fs.protected_hardlinks = 1 [2025-09-24 02:32:41.672] fs.protected_symlinks = 1 [2025-09-24 02:32:41.688] kernel.modules_disabled = 1 [2025-09-24 02:32:41.879] [2025-09-24 02:32:41.879] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:32:43.094] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:32:50.929] SBL1:1210.0.1.0 [2025-09-24 02:32:50.977] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:32:52.543] SBL2:1210.0.1.0 [2025-09-24 02:32:52.591] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:32:52.703] j-A [2025-09-24 02:33:00.043] The R5 Autosar Classic is running [2025-09-24 02:33:00.074] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:33:00.074] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:33:00.681] INIT: version 2.96 booting [2025-09-24 02:33:00.792] INIT: Entering runlevel: 5 [2025-09-24 02:33:00.952] mtd32 attached [2025-09-24 02:33:00.952] mtd24 attached [2025-09-24 02:33:00.969] mtd28 attached [2025-09-24 02:33:01.017] ubi0:dml_code is mounted. [2025-09-24 02:33:01.084] RTNETLINK answers: File exists [2025-09-24 02:33:01.084] ubi1:textures is mounted. [2025-09-24 02:33:01.084] ubi2:animations is mounted. [2025-09-24 02:33:01.084] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:33:01.084] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:33:01.084] data.LB_FadeInType0=100 [2025-09-24 02:33:01.084] data.CHLH_FadeInType0=0 [2025-09-24 02:33:01.084] data.WU_FadeInDelay=0 [2025-09-24 02:33:01.084] max_time_out=0 [2025-09-24 02:33:01.084] No splash screen [2025-09-24 02:33:01.084] stop dss Done [2025-09-24 02:33:01.084] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:33:01.084] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:33:01.084] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:33:01.165] /dev/mem opened. [2025-09-24 02:33:01.165] Memory mapped at address 0xffffb1cde000. [2025-09-24 02:33:01.165] Read at address 0x00600018 (0xffffb1cde018): 0x00000000 [2025-09-24 02:33:01.165] Write at address 0x00600018 (0xffffb1cde018): 0x00400040, readback 0x00400040 [2025-09-24 02:33:01.165] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:33:01.165] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:33:01.261] Loaded PowerVR consumer services. [2025-09-24 02:33:01.421] Waiting data available... [2025-09-24 02:33:01.437] 512+0 records in [2025-09-24 02:33:01.437] 512+0 records out [2025-09-24 02:33:01.469] Starting syslogd/klogd: done [2025-09-24 02:33:01.485] DML Start [2025-09-24 02:33:01.645] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:33:01.869] DML res1: 0 [2025-09-24 02:33:02.285] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:33:02.301] Read Success [2025-09-24 02:33:02.301] Verifying certificate... [2025-09-24 02:33:02.541] Verified OK [2025-09-24 02:33:02.557] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:33:04.060] Verified OK [2025-09-24 02:33:04.081] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:33:04.752] Verified OK [2025-09-24 02:33:04.752] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:33:07.423] fs.protected_hardlinks = 1 [2025-09-24 02:33:07.423] fs.protected_symlinks = 1 [2025-09-24 02:33:07.439] kernel.modules_disabled = 1 [2025-09-24 02:33:07.615] [2025-09-24 02:33:07.615] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:33:08.931] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:33:16.749] SBL1:1210.0.1.0 [2025-09-24 02:33:16.797] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:33:18.364] SBL2:1210.0.1.0 [2025-09-24 02:33:18.412] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:33:18.508] j-A [2025-09-24 02:33:25.863] The R5 Autosar Classic is running [2025-09-24 02:33:25.885] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:33:25.885] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:33:26.494] INIT: version 2.96 booting [2025-09-24 02:33:26.605] INIT: Entering runlevel: 5 [2025-09-24 02:33:26.765] mtd28 attached [2025-09-24 02:33:26.781] mtd24 attached [2025-09-24 02:33:26.781] mtd32 attached [2025-09-24 02:33:26.899] RTNETLINK answers: File exists [2025-09-24 02:33:26.899] ubi0:animations is mounted. [2025-09-24 02:33:26.899] ubi1:textures is mounted. [2025-09-24 02:33:26.899] ubi2:dml_code is mounted. [2025-09-24 02:33:26.899] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:33:26.899] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:33:26.899] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:33:26.899] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:33:26.899] data.LB_FadeInType0=100 [2025-09-24 02:33:26.899] data.CHLH_FadeInType0=0 [2025-09-24 02:33:26.899] data.WU_FadeInDelay=0 [2025-09-24 02:33:26.899] max_time_out=0 [2025-09-24 02:33:26.899] No splash screen [2025-09-24 02:33:26.899] stop dss Done [2025-09-24 02:33:26.899] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:33:26.937] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:33:26.937] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:33:26.979] /dev/mem opened. [2025-09-24 02:33:26.979] Memory mapped at address 0xffff82e10000. [2025-09-24 02:33:26.979] Read at address 0x00600018 (0xffff82e10018): 0x00000000 [2025-09-24 02:33:26.979] Write at address 0x00600018 (0xffff82e10018): 0x00400040, readback 0x00400040 [2025-09-24 02:33:27.058] Loaded PowerVR consumer services. [2025-09-24 02:33:27.234] Waiting data available... [2025-09-24 02:33:27.250] 512+0 records in [2025-09-24 02:33:27.250] 512+0 records out [2025-09-24 02:33:27.266] Starting syslogd/klogd: done [2025-09-24 02:33:27.282] DML Start [2025-09-24 02:33:27.474] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:33:27.650] DML res1: 0 [2025-09-24 02:33:28.201] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:33:28.201] Read Success [2025-09-24 02:33:28.201] Verifying certificate... [2025-09-24 02:33:28.408] Verified OK [2025-09-24 02:33:28.425] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:33:30.136] Verified OK [2025-09-24 02:33:30.136] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:33:30.766] Verified OK [2025-09-24 02:33:30.766] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:33:33.325] fs.protected_hardlinks = 1 [2025-09-24 02:33:33.341] fs.protected_symlinks = 1 [2025-09-24 02:33:33.341] kernel.modules_disabled = 1 [2025-09-24 02:33:33.548] [2025-09-24 02:33:33.548] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:33:34.729] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:33:42.553] SBL1:1210.0.1.0 [2025-09-24 02:33:42.601] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:33:44.168] SBL2:1210.0.1.0 [2025-09-24 02:33:44.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:33:44.312] j-A [2025-09-24 02:33:51.666] The R5 Autosar Classic is running [2025-09-24 02:33:51.689] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:33:51.689] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:33:52.297] INIT: version 2.96 booting [2025-09-24 02:33:52.408] INIT: Entering runlevel: 5 [2025-09-24 02:33:52.553] mtd24 attached [2025-09-24 02:33:52.569] mtd28 attached [2025-09-24 02:33:52.600] mtd32 attached [2025-09-24 02:33:52.600] ubi0:textures is mounted. [2025-09-24 02:33:52.616] ubi1:animations is mounted. [2025-09-24 02:33:52.632] RTNETLINK answers: File exists [2025-09-24 02:33:52.691] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:33:52.691] ubi2:dml_code is mounted. [2025-09-24 02:33:52.691] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:33:52.691] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:33:52.691] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:33:52.691] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:33:52.691] data.LB_FadeInType0=100 [2025-09-24 02:33:52.691] data.CHLH_FadeInType0=0 [2025-09-24 02:33:52.691] data.WU_FadeInDelay=0 [2025-09-24 02:33:52.691] max_time_out=0 [2025-09-24 02:33:52.691] No splash screen [2025-09-24 02:33:52.691] stop dss Done [2025-09-24 02:33:52.723] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:33:52.765] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:33:52.765] /dev/mem opened. [2025-09-24 02:33:52.765] Memory mapped at address 0xffff8c9a9000. [2025-09-24 02:33:52.765] Read at address 0x00600018 (0xffff8c9a9018): 0x00000000 [2025-09-24 02:33:52.765] Write at address 0x00600018 (0xffff8c9a9018): 0x00400040, readback 0x00400040 [2025-09-24 02:33:52.910] Loaded PowerVR consumer services. [2025-09-24 02:33:53.051] Waiting data available... [2025-09-24 02:33:53.051] 512+0 records in [2025-09-24 02:33:53.051] 512+0 records out [2025-09-24 02:33:53.083] Starting syslogd/klogd: done [2025-09-24 02:33:53.099] DML Start [2025-09-24 02:33:53.259] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:33:53.483] DML res1: 0 [2025-09-24 02:33:53.962] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:33:53.983] Read Success [2025-09-24 02:33:53.983] Verifying certificate... [2025-09-24 02:33:54.256] Verified OK [2025-09-24 02:33:54.271] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:33:55.987] Verified OK [2025-09-24 02:33:55.987] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:33:56.576] Verified OK [2025-09-24 02:33:56.576] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:33:59.087] fs.protected_hardlinks = 1 [2025-09-24 02:33:59.103] fs.protected_symlinks = 1 [2025-09-24 02:33:59.103] kernel.modules_disabled = 1 [2025-09-24 02:33:59.311] [2025-09-24 02:33:59.311] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:34:00.573] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:34:08.338] SBL1:1210.0.1.0 [2025-09-24 02:34:08.386] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:34:09.953] SBL2:1210.0.1.0 [2025-09-24 02:34:10.001] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:34:10.113] j-A [2025-09-24 02:34:17.451] The R5 Autosar Classic is running [2025-09-24 02:34:17.482] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:34:17.482] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:34:18.090] INIT: version 2.96 booting [2025-09-24 02:34:18.201] INIT: Entering runlevel: 5 [2025-09-24 02:34:18.362] mtd32 attached [2025-09-24 02:34:18.362] mtd24 attached [2025-09-24 02:34:18.378] mtd28 attached [2025-09-24 02:34:18.426] ubi0:dml_code is mounted. [2025-09-24 02:34:18.426] RTNETLINK answers: File exists [2025-09-24 02:34:18.459] ubi2:animations is mounted. [2025-09-24 02:34:18.459] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:34:18.459] ubi1:textures is mounted. [2025-09-24 02:34:18.459] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:34:18.459] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:34:18.514] data.LB_FadeInType0=100 [2025-09-24 02:34:18.514] data.CHLH_FadeInType0=0 [2025-09-24 02:34:18.514] data.WU_FadeInDelay=0 [2025-09-24 02:34:18.514] max_time_out=0 [2025-09-24 02:34:18.514] No splash screen [2025-09-24 02:34:18.514] stop dss Done [2025-09-24 02:34:18.514] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:34:18.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:34:18.567] /dev/mem opened. [2025-09-24 02:34:18.567] Memory mapped at address 0xffffba328000. [2025-09-24 02:34:18.567] Read at address 0x00600018 (0xffffba328018): 0x00000000 [2025-09-24 02:34:18.567] Write at address 0x00600018 (0xffffba328018): 0x00400040, readback 0x00400040 [2025-09-24 02:34:18.583] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:34:18.583] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:34:18.664] Loaded PowerVR consumer services. [2025-09-24 02:34:18.823] Waiting data available... [2025-09-24 02:34:18.839] 512+0 records in [2025-09-24 02:34:18.839] 512+0 records out [2025-09-24 02:34:18.887] Starting syslogd/klogd: done [2025-09-24 02:34:18.903] DML Start [2025-09-24 02:34:19.095] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:34:19.303] DML res1: 0 [2025-09-24 02:34:19.791] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:34:19.791] Read Success [2025-09-24 02:34:19.791] Verifying certificate... [2025-09-24 02:34:20.048] Verified OK [2025-09-24 02:34:20.064] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:34:21.804] Verified OK [2025-09-24 02:34:21.804] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:34:22.307] Verified OK [2025-09-24 02:34:22.307] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:34:24.786] fs.protected_hardlinks = 1 [2025-09-24 02:34:24.786] fs.protected_symlinks = 1 [2025-09-24 02:34:24.786] kernel.modules_disabled = 1 [2025-09-24 02:34:24.994] [2025-09-24 02:34:24.994] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:34:26.318] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:34:34.157] SBL1:1210.0.1.0 [2025-09-24 02:34:34.205] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:34:35.772] SBL2:1210.0.1.0 [2025-09-24 02:34:35.820] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:34:35.915] j-A [2025-09-24 02:34:43.269] The R5 Autosar Classic is running [2025-09-24 02:34:43.291] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:34:43.291] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:34:43.899] INIT: version 2.96 booting [2025-09-24 02:34:44.010] INIT: Entering runlevel: 5 [2025-09-24 02:34:44.170] mtd28 attached [2025-09-24 02:34:44.186] mtd32 attached [2025-09-24 02:34:44.186] mtd24 attached [2025-09-24 02:34:44.234] ubi0:animations is mounted. [2025-09-24 02:34:44.305] RTNETLINK answers: File exists [2025-09-24 02:34:44.305] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:34:44.305] ubi2:textures is mounted. [2025-09-24 02:34:44.305] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:34:44.305] ubi1:dml_code is mounted. [2025-09-24 02:34:44.305] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:34:44.305] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:34:44.305] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:34:44.305] data.LB_FadeInType0=100 [2025-09-24 02:34:44.305] data.CHLH_FadeInType0=0 [2025-09-24 02:34:44.305] data.WU_FadeInDelay=0 [2025-09-24 02:34:44.305] max_time_out=0 [2025-09-24 02:34:44.305] No splash screen [2025-09-24 02:34:44.305] stop dss Done [2025-09-24 02:34:44.379] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:34:44.379] /dev/mem opened. [2025-09-24 02:34:44.379] Memory mapped at address 0xffff819ca000. [2025-09-24 02:34:44.379] Read at address 0x00600018 (0xffff819ca018): 0x00000000 [2025-09-24 02:34:44.379] Write at address 0x00600018 (0xffff819ca018): 0x00400040, readback 0x00400040 [2025-09-24 02:34:44.379] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:34:44.603] Loaded PowerVR consumer services. [2025-09-24 02:34:44.667] Waiting data available... [2025-09-24 02:34:44.699] 512+0 records in [2025-09-24 02:34:44.699] 512+0 records out [2025-09-24 02:34:44.730] Starting syslogd/klogd: done [2025-09-24 02:34:44.746] DML Start [2025-09-24 02:34:44.907] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:34:45.130] DML res1: 0 [2025-09-24 02:34:45.607] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:34:45.607] Read Success [2025-09-24 02:34:45.607] Verifying certificate... [2025-09-24 02:34:45.845] Verified OK [2025-09-24 02:34:45.861] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:34:47.586] Verified OK [2025-09-24 02:34:47.586] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:34:48.151] Verified OK [2025-09-24 02:34:48.151] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:34:50.630] fs.protected_hardlinks = 1 [2025-09-24 02:34:50.630] fs.protected_symlinks = 1 [2025-09-24 02:34:50.630] kernel.modules_disabled = 1 [2025-09-24 02:34:50.837] [2025-09-24 02:34:50.837] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:34:52.212] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:34:59.959] SBL1:1210.0.1.0 [2025-09-24 02:34:59.991] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:35:01.574] SBL2:1210.0.1.0 [2025-09-24 02:35:01.606] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:35:01.718] j-A [2025-09-24 02:35:09.089] The R5 Autosar Classic is running [2025-09-24 02:35:09.089] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:35:09.089] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:35:09.697] INIT: version 2.96 booting [2025-09-24 02:35:09.808] INIT: Entering runlevel: 5 [2025-09-24 02:35:09.952] mtd28 attached [2025-09-24 02:35:09.968] mtd32 attached [2025-09-24 02:35:09.968] mtd24 attached [2025-09-24 02:35:10.000] ubi0:animations is mounted. [2025-09-24 02:35:10.033] RTNETLINK answers: File exists [2025-09-24 02:35:10.033] ubi2:textures is mounted. [2025-09-24 02:35:10.055] ubi1:dml_code is mounted. [2025-09-24 02:35:10.055] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:35:10.055] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:35:10.088] data.LB_FadeInType0=100 [2025-09-24 02:35:10.088] data.CHLH_FadeInType0=0 [2025-09-24 02:35:10.088] data.WU_FadeInDelay=0 [2025-09-24 02:35:10.088] max_time_out=0 [2025-09-24 02:35:10.088] No splash screen [2025-09-24 02:35:10.088] stop dss Done [2025-09-24 02:35:10.088] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:35:10.088] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:35:10.088] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:35:10.161] /dev/mem opened. [2025-09-24 02:35:10.161] Memory mapped at address 0xffff9ee46000. [2025-09-24 02:35:10.161] Read at address 0x00600018 (0xffff9ee46018): 0x00000000 [2025-09-24 02:35:10.161] Write at address 0x00600018 (0xffff9ee46018): 0x00400040, readback 0x00400040 [2025-09-24 02:35:10.161] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:35:10.177] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:35:10.273] Loaded PowerVR consumer services. [2025-09-24 02:35:10.417] Waiting data available... [2025-09-24 02:35:10.433] 512+0 records in [2025-09-24 02:35:10.433] 512+0 records out [2025-09-24 02:35:10.481] Starting syslogd/klogd: done [2025-09-24 02:35:10.497] DML Start [2025-09-24 02:35:10.657] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:35:10.929] DML res1: 0 [2025-09-24 02:35:11.312] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:35:11.339] Read Success [2025-09-24 02:35:11.339] Verifying certificate... [2025-09-24 02:35:11.595] Verified OK [2025-09-24 02:35:11.611] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:35:13.258] Verified OK [2025-09-24 02:35:13.258] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:35:13.845] Verified OK [2025-09-24 02:35:13.845] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:35:16.419] fs.protected_hardlinks = 1 [2025-09-24 02:35:16.419] fs.protected_symlinks = 1 [2025-09-24 02:35:16.435] kernel.modules_disabled = 1 [2025-09-24 02:35:16.627] [2025-09-24 02:35:16.627] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:35:17.999] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:35:25.764] SBL1:1210.0.1.0 [2025-09-24 02:35:25.796] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:35:27.378] SBL2:1210.0.1.0 [2025-09-24 02:35:27.410] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:35:27.522] j-A [2025-09-24 02:35:34.893] The R5 Autosar Classic is running [2025-09-24 02:35:34.893] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:35:34.893] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:35:35.501] INIT: version 2.96 booting [2025-09-24 02:35:35.612] INIT: Entering runlevel: 5 [2025-09-24 02:35:35.772] mtd32 attached [2025-09-24 02:35:35.788] mtd28 attached [2025-09-24 02:35:35.788] mtd24 attached [2025-09-24 02:35:35.836] ubi0:dml_code is mounted. [2025-09-24 02:35:35.836] RTNETLINK answers: File exists [2025-09-24 02:35:35.879] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:35:35.879] ubi1:animations is mounted. [2025-09-24 02:35:35.879] ubi2:textures is mounted. [2025-09-24 02:35:35.879] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:35:35.879] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:35:35.879] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:35:35.907] data.LB_FadeInType0=100 [2025-09-24 02:35:35.907] data.CHLH_FadeInType0=0 [2025-09-24 02:35:35.907] data.WU_FadeInDelay=0 [2025-09-24 02:35:35.907] max_time_out=0 [2025-09-24 02:35:35.907] No splash screen [2025-09-24 02:35:35.907] stop dss Done [2025-09-24 02:35:35.907] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:35:35.978] /dev/mem opened. [2025-09-24 02:35:35.978] Memory mapped at address 0xffffaf044000. [2025-09-24 02:35:35.978] Read at address 0x00600018 (0xffffaf044018): 0x00000000 [2025-09-24 02:35:35.978] Write at address 0x00600018 (0xffffaf044018): 0x00400040, readback 0x00400040 [2025-09-24 02:35:35.978] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:35:35.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:35:36.138] Loaded PowerVR consumer services. [2025-09-24 02:35:36.273] Waiting data available... [2025-09-24 02:35:36.273] 512+0 records in [2025-09-24 02:35:36.273] 512+0 records out [2025-09-24 02:35:36.305] Starting syslogd/klogd: done [2025-09-24 02:35:36.321] DML Start [2025-09-24 02:35:36.512] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:35:36.752] DML res1: 0 [2025-09-24 02:35:37.115] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:35:37.115] Read Success [2025-09-24 02:35:37.115] Verifying certificate... [2025-09-24 02:35:37.339] Verified OK [2025-09-24 02:35:37.355] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:35:38.970] Verified OK [2025-09-24 02:35:38.970] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:35:39.686] Verified OK [2025-09-24 02:35:39.686] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:35:42.308] fs.protected_hardlinks = 1 [2025-09-24 02:35:42.308] fs.protected_symlinks = 1 [2025-09-24 02:35:42.324] kernel.modules_disabled = 1 [2025-09-24 02:35:42.515] [2025-09-24 02:35:42.515] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:35:43.832] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:35:51.558] SBL1:1210.0.1.0 [2025-09-24 02:35:51.590] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:35:53.172] SBL2:1210.0.1.0 [2025-09-24 02:35:53.204] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:35:53.317] j-A [2025-09-24 02:36:00.672] The R5 Autosar Classic is running [2025-09-24 02:36:00.672] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:36:00.692] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:36:01.301] INIT: version 2.96 booting [2025-09-24 02:36:01.412] INIT: Entering runlevel: 5 [2025-09-24 02:36:01.572] mtd32 attached [2025-09-24 02:36:01.588] mtd28 attached [2025-09-24 02:36:01.588] mtd24 attached [2025-09-24 02:36:01.652] RTNETLINK answers: File exists [2025-09-24 02:36:01.652] ubi1:animations is mounted. [2025-09-24 02:36:01.687] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:36:01.687] ubi0:dml_code is mounted. [2025-09-24 02:36:01.687] ubi2:textures is mounted. [2025-09-24 02:36:01.687] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:36:01.687] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:36:01.687] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:36:01.687] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:36:01.713] data.LB_FadeInType0=100 [2025-09-24 02:36:01.713] data.CHLH_FadeInType0=0 [2025-09-24 02:36:01.713] data.WU_FadeInDelay=0 [2025-09-24 02:36:01.713] max_time_out=0 [2025-09-24 02:36:01.713] No splash screen [2025-09-24 02:36:01.713] stop dss Done [2025-09-24 02:36:01.762] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:36:01.795] /dev/mem opened. [2025-09-24 02:36:01.795] Memory mapped at address 0xffffadc05000. [2025-09-24 02:36:01.795] Read at address 0x00600018 (0xffffadc05018): 0x00000000 [2025-09-24 02:36:01.795] Write at address 0x00600018 (0xffffadc05018): 0x00400040, readback 0x00400040 [2025-09-24 02:36:01.795] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:36:02.019] Loaded PowerVR consumer services. [2025-09-24 02:36:02.051] Waiting data available... [2025-09-24 02:36:02.067] 512+0 records in [2025-09-24 02:36:02.067] 512+0 records out [2025-09-24 02:36:02.131] Starting syslogd/klogd: done [2025-09-24 02:36:02.147] DML Start [2025-09-24 02:36:02.323] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:36:02.579] DML res1: 0 [2025-09-24 02:36:02.915] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:36:02.936] Read Success [2025-09-24 02:36:02.936] Verifying certificate... [2025-09-24 02:36:03.191] Verified OK [2025-09-24 02:36:03.191] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:36:04.773] Verified OK [2025-09-24 02:36:04.795] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:36:05.457] Verified OK [2025-09-24 02:36:05.457] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:36:08.142] fs.protected_hardlinks = 1 [2025-09-24 02:36:08.142] fs.protected_symlinks = 1 [2025-09-24 02:36:08.158] kernel.modules_disabled = 1 [2025-09-24 02:36:08.351] [2025-09-24 02:36:08.351] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:36:09.629] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:36:17.371] SBL1:1210.0.1.0 [2025-09-24 02:36:17.403] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:36:18.985] SBL2:1210.0.1.0 [2025-09-24 02:36:19.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:36:19.130] j-A [2025-09-24 02:36:26.500] The R5 Autosar Classic is running [2025-09-24 02:36:26.500] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:36:26.500] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:36:27.107] INIT: version 2.96 booting [2025-09-24 02:36:27.219] INIT: Entering runlevel: 5 [2025-09-24 02:36:27.379] mtd32 attached [2025-09-24 02:36:27.379] mtd24 attached [2025-09-24 02:36:27.395] mtd28 attached [2025-09-24 02:36:27.443] ubi0:dml_code is mounted. [2025-09-24 02:36:27.443] RTNETLINK answers: File exists [2025-09-24 02:36:27.510] ubi2:animations is mounted. [2025-09-24 02:36:27.510] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:36:27.510] ubi1:textures is mounted. [2025-09-24 02:36:27.510] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:36:27.510] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:36:27.510] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:36:27.510] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:36:27.510] data.LB_FadeInType0=100 [2025-09-24 02:36:27.510] data.CHLH_FadeInType0=0 [2025-09-24 02:36:27.510] data.WU_FadeInDelay=0 [2025-09-24 02:36:27.510] max_time_out=0 [2025-09-24 02:36:27.510] No splash screen [2025-09-24 02:36:27.510] stop dss Done [2025-09-24 02:36:27.583] /dev/mem opened. [2025-09-24 02:36:27.583] Memory mapped at address 0xffffaaa11000. [2025-09-24 02:36:27.583] Read at address 0x00600018 (0xffffaaa11018): 0x00000000 [2025-09-24 02:36:27.583] Write at address 0x00600018 (0xffffaaa11018): 0x00400040, readback 0x00400040 [2025-09-24 02:36:27.616] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:36:27.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:36:27.739] Loaded PowerVR consumer services. [2025-09-24 02:36:27.852] Waiting data available... [2025-09-24 02:36:27.868] 512+0 records in [2025-09-24 02:36:27.868] 512+0 records out [2025-09-24 02:36:27.915] Starting syslogd/klogd: done [2025-09-24 02:36:27.932] DML Start [2025-09-24 02:36:28.075] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:36:28.315] DML res1: 0 [2025-09-24 02:36:28.767] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:36:28.767] Read Success [2025-09-24 02:36:28.767] Verifying certificate... [2025-09-24 02:36:29.039] Verified OK [2025-09-24 02:36:29.055] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:36:30.661] Verified OK [2025-09-24 02:36:30.661] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:36:31.269] Verified OK [2025-09-24 02:36:31.269] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:36:33.890] fs.protected_hardlinks = 1 [2025-09-24 02:36:33.890] fs.protected_symlinks = 1 [2025-09-24 02:36:33.906] kernel.modules_disabled = 1 [2025-09-24 02:36:34.098] [2025-09-24 02:36:34.098] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:36:35.338] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:36:43.175] SBL1:1210.0.1.0 [2025-09-24 02:36:43.207] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:36:44.789] SBL2:1210.0.1.0 [2025-09-24 02:36:44.821] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:36:44.934] j-A [2025-09-24 02:36:52.307] The R5 Autosar Classic is running [2025-09-24 02:36:52.307] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:36:52.307] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:36:52.915] INIT: version 2.96 booting [2025-09-24 02:36:53.026] INIT: Entering runlevel: 5 [2025-09-24 02:36:53.171] mtd24 attached [2025-09-24 02:36:53.187] mtd28 attached [2025-09-24 02:36:53.202] mtd32 attached [2025-09-24 02:36:53.305] RTNETLINK answers: File exists [2025-09-24 02:36:53.305] ubi0:textures is mounted. [2025-09-24 02:36:53.305] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:36:53.305] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:36:53.305] ubi1:animations is mounted. [2025-09-24 02:36:53.305] ubi2:dml_code is mounted. [2025-09-24 02:36:53.305] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:36:53.305] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:36:53.305] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:36:53.305] data.LB_FadeInType0=100 [2025-09-24 02:36:53.305] data.CHLH_FadeInType0=0 [2025-09-24 02:36:53.305] data.WU_FadeInDelay=0 [2025-09-24 02:36:53.305] max_time_out=0 [2025-09-24 02:36:53.305] No splash screen [2025-09-24 02:36:53.305] stop dss Done [2025-09-24 02:36:53.378] /dev/mem opened. [2025-09-24 02:36:53.378] Memory mapped at address 0xffff9d7ca000. [2025-09-24 02:36:53.378] Read at address 0x00600018 (0xffff9d7ca018): 0x00000000 [2025-09-24 02:36:53.378] Write at address 0x00600018 (0xffff9d7ca018): 0x00400040, readback 0x00400040 [2025-09-24 02:36:53.378] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:36:53.378] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:36:53.474] Loaded PowerVR consumer services. [2025-09-24 02:36:53.634] Waiting data available... [2025-09-24 02:36:53.650] 512+0 records in [2025-09-24 02:36:53.650] 512+0 records out [2025-09-24 02:36:53.666] Starting syslogd/klogd: done [2025-09-24 02:36:53.698] DML Start [2025-09-24 02:36:53.874] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:36:54.114] DML res1: 0 [2025-09-24 02:36:54.578] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:36:54.593] Read Success [2025-09-24 02:36:54.593] Verifying certificate... [2025-09-24 02:36:54.882] Verified OK [2025-09-24 02:36:54.898] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:36:56.487] Verified OK [2025-09-24 02:36:56.487] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:36:57.070] Verified OK [2025-09-24 02:36:57.070] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:36:59.533] fs.protected_hardlinks = 1 [2025-09-24 02:36:59.533] fs.protected_symlinks = 1 [2025-09-24 02:36:59.548] kernel.modules_disabled = 1 [2025-09-24 02:36:59.740] [2025-09-24 02:36:59.740] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:37:01.137] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:37:08.956] SBL1:1210.0.1.0 [2025-09-24 02:37:09.004] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:37:10.571] SBL2:1210.0.1.0 [2025-09-24 02:37:10.619] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:37:10.730] j-A [2025-09-24 02:37:18.070] The R5 Autosar Classic is running [2025-09-24 02:37:18.101] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:37:18.101] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:37:18.709] INIT: version 2.96 booting [2025-09-24 02:37:18.821] INIT: Entering runlevel: 5 [2025-09-24 02:37:18.980] mtd24 attached [2025-09-24 02:37:18.980] mtd28 attached [2025-09-24 02:37:18.997] mtd32 attached [2025-09-24 02:37:19.045] RTNETLINK answers: File exists [2025-09-24 02:37:19.045] ubi0:textures is mounted. [2025-09-24 02:37:19.107] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:37:19.107] ubi1:animations is mounted. [2025-09-24 02:37:19.107] ubi2:dml_code is mounted. [2025-09-24 02:37:19.107] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:37:19.107] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:37:19.107] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:37:19.107] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:37:19.107] data.LB_FadeInType0=100 [2025-09-24 02:37:19.107] data.CHLH_FadeInType0=0 [2025-09-24 02:37:19.107] data.WU_FadeInDelay=0 [2025-09-24 02:37:19.107] max_time_out=0 [2025-09-24 02:37:19.107] No splash screen [2025-09-24 02:37:19.107] stop dss Done [2025-09-24 02:37:19.139] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:37:19.155] /dev/mem opened. [2025-09-24 02:37:19.155] Memory mapped at address 0xffffa7acf000. [2025-09-24 02:37:19.187] Read at address 0x00600018 (0xffffa7acf018): 0x00000000 [2025-09-24 02:37:19.187] Write at address 0x00600018 (0xffffa7acf018): 0x00400040, readback 0x00400040 [2025-09-24 02:37:19.187] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:37:19.299] Loaded PowerVR consumer services. [2025-09-24 02:37:19.427] Waiting data available... [2025-09-24 02:37:19.443] 512+0 records in [2025-09-24 02:37:19.459] 512+0 records out [2025-09-24 02:37:19.491] Starting syslogd/klogd: done [2025-09-24 02:37:19.507] DML Start [2025-09-24 02:37:19.698] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:37:19.922] DML res1: 0 [2025-09-24 02:37:20.419] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:37:20.434] Read Success [2025-09-24 02:37:20.434] Verifying certificate... [2025-09-24 02:37:20.690] Verified OK [2025-09-24 02:37:20.706] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:37:22.305] Verified OK [2025-09-24 02:37:22.305] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:37:22.958] Verified OK [2025-09-24 02:37:22.958] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:37:25.548] fs.protected_hardlinks = 1 [2025-09-24 02:37:25.548] fs.protected_symlinks = 1 [2025-09-24 02:37:25.564] kernel.modules_disabled = 1 [2025-09-24 02:37:25.756] [2025-09-24 02:37:25.756] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:37:26.973] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:37:34.774] SBL1:1210.0.1.0 [2025-09-24 02:37:34.822] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:37:36.389] SBL2:1210.0.1.0 [2025-09-24 02:37:36.437] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:37:36.550] j-A [2025-09-24 02:37:43.887] The R5 Autosar Classic is running [2025-09-24 02:37:43.912] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:37:43.912] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:37:44.521] INIT: version 2.96 booting [2025-09-24 02:37:44.632] INIT: Entering runlevel: 5 [2025-09-24 02:37:44.777] mtd24 attached [2025-09-24 02:37:44.793] mtd28 attached [2025-09-24 02:37:44.824] mtd32 attached [2025-09-24 02:37:44.825] ubi0:textures is mounted. [2025-09-24 02:37:44.856] RTNETLINK answers: File exists [2025-09-24 02:37:44.856] ubi1:animations is mounted. [2025-09-24 02:37:44.920] ubi2:dml_code is mounted. [2025-09-24 02:37:44.920] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:37:44.920] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:37:44.920] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:37:44.920] data.LB_FadeInType0=100 [2025-09-24 02:37:44.920] data.CHLH_FadeInType0=0 [2025-09-24 02:37:44.920] data.WU_FadeInDelay=0 [2025-09-24 02:37:44.920] max_time_out=0 [2025-09-24 02:37:44.920] No splash screen [2025-09-24 02:37:44.920] stop dss Done [2025-09-24 02:37:44.920] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:37:44.920] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:37:44.986] /dev/mem opened. [2025-09-24 02:37:44.986] Memory mapped at address 0xffff966e8000. [2025-09-24 02:37:44.986] Read at address 0x00600018 (0xffff966e8018): 0x00000000 [2025-09-24 02:37:44.986] Write at address 0x00600018 (0xffff966e8018): 0x00400040, readback 0x00400040 [2025-09-24 02:37:44.986] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:37:45.003] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:37:45.267] Loaded PowerVR consumer services. [2025-09-24 02:37:45.267] Waiting data available... [2025-09-24 02:37:45.283] 512+0 records in [2025-09-24 02:37:45.283] 512+0 records out [2025-09-24 02:37:45.331] Starting syslogd/klogd: done [2025-09-24 02:37:45.347] DML Start [2025-09-24 02:37:45.507] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:37:45.746] DML res1: 0 [2025-09-24 02:37:46.211] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:37:46.211] Read Success [2025-09-24 02:37:46.227] Verifying certificate... [2025-09-24 02:37:46.450] Verified OK [2025-09-24 02:37:46.466] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:37:48.256] Verified OK [2025-09-24 02:37:48.256] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:37:48.784] Verified OK [2025-09-24 02:37:48.784] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:37:51.310] fs.protected_hardlinks = 1 [2025-09-24 02:37:51.326] fs.protected_symlinks = 1 [2025-09-24 02:37:51.326] kernel.modules_disabled = 1 [2025-09-24 02:37:51.518] [2025-09-24 02:37:51.518] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:37:52.778] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:38:00.567] SBL1:1210.0.1.0 [2025-09-24 02:38:00.599] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:38:02.181] SBL2:1210.0.1.0 [2025-09-24 02:38:02.213] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:38:02.325] j-A [2025-09-24 02:38:09.698] The R5 Autosar Classic is running [2025-09-24 02:38:09.698] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:38:09.698] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:38:10.305] INIT: version 2.96 booting [2025-09-24 02:38:10.417] INIT: Entering runlevel: 5 [2025-09-24 02:38:10.577] mtd24 attached [2025-09-24 02:38:10.593] mtd32 attached [2025-09-24 02:38:10.593] mtd28 attached [2025-09-24 02:38:10.609] ubi0:textures is mounted. [2025-09-24 02:38:10.641] RTNETLINK answers: File exists [2025-09-24 02:38:10.697] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:38:10.697] ubi1:dml_code is mounted. [2025-09-24 02:38:10.697] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:38:10.697] ubi2:animations is mounted. [2025-09-24 02:38:10.697] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:38:10.697] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:38:10.697] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:38:10.697] data.LB_FadeInType0=100 [2025-09-24 02:38:10.697] data.CHLH_FadeInType0=0 [2025-09-24 02:38:10.697] data.WU_FadeInDelay=0 [2025-09-24 02:38:10.697] max_time_out=0 [2025-09-24 02:38:10.697] No splash screen [2025-09-24 02:38:10.697] stop dss Done [2025-09-24 02:38:10.771] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:38:10.771] /dev/mem opened. [2025-09-24 02:38:10.771] Memory mapped at address 0xffffb53be000. [2025-09-24 02:38:10.771] Read at address 0x00600018 (0xffffb53be018): 0x00000000 [2025-09-24 02:38:10.771] Write at address 0x00600018 (0xffffb53be018): 0x00400040, readback 0x00400040 [2025-09-24 02:38:10.771] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:38:10.946] Loaded PowerVR consumer services. [2025-09-24 02:38:11.043] Waiting data available... [2025-09-24 02:38:11.074] 512+0 records in [2025-09-24 02:38:11.074] 512+0 records out [2025-09-24 02:38:11.106] Starting syslogd/klogd: done [2025-09-24 02:38:11.122] DML Start [2025-09-24 02:38:11.314] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:38:11.570] DML res1: 0 [2025-09-24 02:38:11.903] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:38:11.904] Read Success [2025-09-24 02:38:11.904] Verifying certificate... [2025-09-24 02:38:12.143] Verified OK [2025-09-24 02:38:12.159] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:38:13.868] Verified OK [2025-09-24 02:38:13.868] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:38:14.420] Verified OK [2025-09-24 02:38:14.420] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:38:16.912] fs.protected_hardlinks = 1 [2025-09-24 02:38:16.912] fs.protected_symlinks = 1 [2025-09-24 02:38:16.912] kernel.modules_disabled = 1 [2025-09-24 02:38:17.104] [2025-09-24 02:38:17.104] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:38:18.623] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:38:26.355] SBL1:1210.0.1.0 [2025-09-24 02:38:26.386] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:38:27.969] SBL2:1210.0.1.0 [2025-09-24 02:38:28.001] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:38:28.114] j-A [2025-09-24 02:38:35.467] The R5 Autosar Classic is running [2025-09-24 02:38:35.467] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:38:35.488] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:38:36.095] INIT: version 2.96 booting [2025-09-24 02:38:36.207] INIT: Entering runlevel: 5 [2025-09-24 02:38:36.367] mtd32 attached [2025-09-24 02:38:36.383] mtd28 attached [2025-09-24 02:38:36.383] mtd24 attached [2025-09-24 02:38:36.430] RTNETLINK answers: File exists [2025-09-24 02:38:36.430] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:38:36.476] ubi0:dml_code is mounted. [2025-09-24 02:38:36.476] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:38:36.476] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:38:36.476] ubi1:animations is mounted. [2025-09-24 02:38:36.476] ubi2:textures is mounted. [2025-09-24 02:38:36.476] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:38:36.476] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:38:36.503] data.LB_FadeInType0=100 [2025-09-24 02:38:36.503] data.CHLH_FadeInType0=0 [2025-09-24 02:38:36.503] data.WU_FadeInDelay=0 [2025-09-24 02:38:36.503] max_time_out=0 [2025-09-24 02:38:36.503] No splash screen [2025-09-24 02:38:36.503] stop dss Done [2025-09-24 02:38:36.519] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:38:36.535] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:38:36.587] /dev/mem opened. [2025-09-24 02:38:36.587] Memory mapped at address 0xffff97905000. [2025-09-24 02:38:36.587] Read at address 0x00600018 (0xffff97905018): 0x00000000 [2025-09-24 02:38:36.587] Write at address 0x00600018 (0xffff97905018): 0x00400040, readback 0x00400040 [2025-09-24 02:38:36.762] Loaded PowerVR consumer services. [2025-09-24 02:38:36.843] Waiting data available... [2025-09-24 02:38:36.859] 512+0 records in [2025-09-24 02:38:36.859] 512+0 records out [2025-09-24 02:38:36.907] Starting syslogd/klogd: done [2025-09-24 02:38:36.923] DML Start [2025-09-24 02:38:37.098] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:38:37.275] DML res1: 0 [2025-09-24 02:38:37.802] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:38:37.823] Read Success [2025-09-24 02:38:37.823] Verifying certificate... [2025-09-24 02:38:38.078] Verified OK [2025-09-24 02:38:38.110] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:38:39.725] Verified OK [2025-09-24 02:38:39.725] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:38:40.301] Verified OK [2025-09-24 02:38:40.301] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:38:42.859] fs.protected_hardlinks = 1 [2025-09-24 02:38:42.859] fs.protected_symlinks = 1 [2025-09-24 02:38:42.875] kernel.modules_disabled = 1 [2025-09-24 02:38:43.052] [2025-09-24 02:38:43.052] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:38:44.403] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:38:52.214] SBL1:1210.0.1.0 [2025-09-24 02:38:52.262] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:38:53.829] SBL2:1210.0.1.0 [2025-09-24 02:38:53.877] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:38:53.989] j-A [2025-09-24 02:39:01.327] The R5 Autosar Classic is running [2025-09-24 02:39:01.358] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:39:01.358] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:39:01.965] INIT: version 2.96 booting [2025-09-24 02:39:02.061] INIT: Entering runlevel: 5 [2025-09-24 02:39:02.221] mtd32 attached [2025-09-24 02:39:02.237] mtd28 attached [2025-09-24 02:39:02.253] mtd24 attached [2025-09-24 02:39:02.269] ubi0:dml_code is mounted. [2025-09-24 02:39:02.301] RTNETLINK answers: File exists [2025-09-24 02:39:02.301] ubi2:textures is mounted. [2025-09-24 02:39:02.322] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:39:02.322] ubi1:animations is mounted. [2025-09-24 02:39:02.322] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:39:02.355] data.LB_FadeInType0=100 [2025-09-24 02:39:02.355] data.CHLH_FadeInType0=0 [2025-09-24 02:39:02.355] data.WU_FadeInDelay=0 [2025-09-24 02:39:02.355] max_time_out=0 [2025-09-24 02:39:02.355] No splash screen [2025-09-24 02:39:02.355] stop dss Done [2025-09-24 02:39:02.355] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:39:02.355] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:39:02.355] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:39:02.452] /dev/mem opened. [2025-09-24 02:39:02.452] Memory mapped at address 0xffff8099d000. [2025-09-24 02:39:02.452] Read at address 0x00600018 (0xffff8099d018): 0x00000000 [2025-09-24 02:39:02.452] Write at address 0x00600018 (0xffff8099d018): 0x00400040, readback 0x00400040 [2025-09-24 02:39:02.452] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:39:02.452] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:39:02.517] Loaded PowerVR consumer services. [2025-09-24 02:39:02.677] Waiting data available... [2025-09-24 02:39:02.693] 512+0 records in [2025-09-24 02:39:02.693] 512+0 records out [2025-09-24 02:39:02.725] Starting syslogd/klogd: done [2025-09-24 02:39:02.741] DML Start [2025-09-24 02:39:02.933] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:39:03.140] DML res1: 0 [2025-09-24 02:39:03.617] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:39:03.617] Read Success [2025-09-24 02:39:03.617] Verifying certificate... [2025-09-24 02:39:03.840] Verified OK [2025-09-24 02:39:03.857] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:39:05.582] Verified OK [2025-09-24 02:39:05.582] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:39:06.154] Verified OK [2025-09-24 02:39:06.154] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:39:08.632] fs.protected_hardlinks = 1 [2025-09-24 02:39:08.632] fs.protected_symlinks = 1 [2025-09-24 02:39:08.648] kernel.modules_disabled = 1 [2025-09-24 02:39:08.856] [2025-09-24 02:39:08.856] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:39:10.236] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:39:18.028] SBL1:1210.0.1.0 [2025-09-24 02:39:18.076] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:39:19.642] SBL2:1210.0.1.0 [2025-09-24 02:39:19.690] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:39:19.803] j-A [2025-09-24 02:39:27.173] The R5 Autosar Classic is running [2025-09-24 02:39:27.173] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:39:27.173] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:39:27.781] INIT: version 2.96 booting [2025-09-24 02:39:27.892] INIT: Entering runlevel: 5 [2025-09-24 02:39:28.052] mtd28 attached [2025-09-24 02:39:28.052] mtd32 attached [2025-09-24 02:39:28.068] mtd24 attached [2025-09-24 02:39:28.116] RTNETLINK answers: File exists [2025-09-24 02:39:28.116] ubi0:animations is mounted. [2025-09-24 02:39:28.174] ubi1:dml_code is mounted. [2025-09-24 02:39:28.174] ubi2:textures is mounted. [2025-09-24 02:39:28.174] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:39:28.174] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:39:28.174] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:39:28.174] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:39:28.174] data.LB_FadeInType0=100 [2025-09-24 02:39:28.174] data.CHLH_FadeInType0=0 [2025-09-24 02:39:28.174] data.WU_FadeInDelay=0 [2025-09-24 02:39:28.174] max_time_out=0 [2025-09-24 02:39:28.174] No splash screen [2025-09-24 02:39:28.174] stop dss Done [2025-09-24 02:39:28.174] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:39:28.206] /dev/mem opened. [2025-09-24 02:39:28.247] Memory mapped at address 0xffff851bb000. [2025-09-24 02:39:28.247] Read at address 0x00600018 (0xffff851bb018): 0x00000000 [2025-09-24 02:39:28.247] Write at address 0x00600018 (0xffff851bb018): 0x00400040, readback 0x00400040 [2025-09-24 02:39:28.247] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:39:28.247] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:39:28.470] Loaded PowerVR consumer services. [2025-09-24 02:39:28.534] Waiting data available... [2025-09-24 02:39:28.534] 512+0 records in [2025-09-24 02:39:28.534] 512+0 records out [2025-09-24 02:39:28.567] Starting syslogd/klogd: done [2025-09-24 02:39:28.583] DML Start [2025-09-24 02:39:28.759] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:39:28.951] DML res1: 0 [2025-09-24 02:39:29.499] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:39:29.499] Read Success [2025-09-24 02:39:29.499] Verifying certificate... [2025-09-24 02:39:29.722] Verified OK [2025-09-24 02:39:29.738] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:39:31.456] Verified OK [2025-09-24 02:39:31.456] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:39:32.000] Verified OK [2025-09-24 02:39:32.000] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:39:34.589] fs.protected_hardlinks = 1 [2025-09-24 02:39:34.589] fs.protected_symlinks = 1 [2025-09-24 02:39:34.589] kernel.modules_disabled = 1 [2025-09-24 02:39:34.780] [2025-09-24 02:39:34.780] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:39:36.000] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:39:43.823] SBL1:1210.0.1.0 [2025-09-24 02:39:43.871] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:39:45.437] SBL2:1210.0.1.0 [2025-09-24 02:39:45.485] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:39:45.597] j-A [2025-09-24 02:39:52.936] The R5 Autosar Classic is running [2025-09-24 02:39:52.961] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:39:52.961] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:39:53.568] INIT: version 2.96 booting [2025-09-24 02:39:53.680] INIT: Entering runlevel: 5 [2025-09-24 02:39:53.841] mtd28 attached [2025-09-24 02:39:53.857] mtd32 attached [2025-09-24 02:39:53.857] mtd24 attached [2025-09-24 02:39:53.904] RTNETLINK answers: File exists [2025-09-24 02:39:53.979] ubi0:animations is mounted. [2025-09-24 02:39:53.979] ubi1:dml_code is mounted. [2025-09-24 02:39:53.979] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:39:53.979] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:39:53.979] ubi2:textures is mounted. [2025-09-24 02:39:53.979] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:39:53.979] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:39:53.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:39:53.979] data.LB_FadeInType0=100 [2025-09-24 02:39:53.979] data.CHLH_FadeInType0=0 [2025-09-24 02:39:53.979] data.WU_FadeInDelay=0 [2025-09-24 02:39:53.979] max_time_out=0 [2025-09-24 02:39:53.979] No splash screen [2025-09-24 02:39:53.979] stop dss Done [2025-09-24 02:39:53.995] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:39:53.995] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:39:54.027] /dev/mem opened. [2025-09-24 02:39:54.027] Memory mapped at address 0xffff9b96e000. [2025-09-24 02:39:54.053] Read at address 0x00600018 (0xffff9b96e018): 0x00000000 [2025-09-24 02:39:54.053] Write at address 0x00600018 (0xffff9b96e018): 0x00400040, readback 0x00400040 [2025-09-24 02:39:54.197] Loaded PowerVR consumer services. [2025-09-24 02:39:54.325] Waiting data available... [2025-09-24 02:39:54.341] 512+0 records in [2025-09-24 02:39:54.341] 512+0 records out [2025-09-24 02:39:54.357] Starting syslogd/klogd: done [2025-09-24 02:39:54.389] DML Start [2025-09-24 02:39:54.581] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:39:54.789] DML res1: 0 [2025-09-24 02:39:55.188] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:39:55.210] Read Success [2025-09-24 02:39:55.210] Verifying certificate... [2025-09-24 02:39:55.433] Verified OK [2025-09-24 02:39:55.448] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:39:57.255] Verified OK [2025-09-24 02:39:57.255] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:39:57.799] Verified OK [2025-09-24 02:39:57.799] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:40:00.292] fs.protected_hardlinks = 1 [2025-09-24 02:40:00.308] fs.protected_symlinks = 1 [2025-09-24 02:40:00.324] kernel.modules_disabled = 1 [2025-09-24 02:40:00.516] [2025-09-24 02:40:00.516] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:40:01.892] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:40:09.650] SBL1:1210.0.1.0 [2025-09-24 02:40:09.682] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:40:11.265] SBL2:1210.0.1.0 [2025-09-24 02:40:11.297] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:40:11.409] j-A [2025-09-24 02:40:18.783] The R5 Autosar Classic is running [2025-09-24 02:40:18.783] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:40:18.783] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:40:19.391] INIT: version 2.96 booting [2025-09-24 02:40:19.502] INIT: Entering runlevel: 5 [2025-09-24 02:40:19.647] mtd28 attached [2025-09-24 02:40:19.663] mtd24 attached [2025-09-24 02:40:19.679] mtd32 attached [2025-09-24 02:40:19.726] ubi0:animations is mounted. [2025-09-24 02:40:19.726] RTNETLINK answers: File exists [2025-09-24 02:40:19.782] ubi1:textures is mounted. [2025-09-24 02:40:19.782] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:40:19.782] ubi2:dml_code is mounted. [2025-09-24 02:40:19.782] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:40:19.782] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:40:19.782] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:40:19.782] data.LB_FadeInType0=100 [2025-09-24 02:40:19.782] data.CHLH_FadeInType0=0 [2025-09-24 02:40:19.782] data.WU_FadeInDelay=0 [2025-09-24 02:40:19.782] max_time_out=0 [2025-09-24 02:40:19.782] No splash screen [2025-09-24 02:40:19.782] stop dss Done [2025-09-24 02:40:19.782] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:40:19.862] /dev/mem opened. [2025-09-24 02:40:19.862] Memory mapped at address 0xffffa4377000. [2025-09-24 02:40:19.862] Read at address 0x00600018 (0xffffa4377018): 0x00000000 [2025-09-24 02:40:19.862] Write at address 0x00600018 (0xffffa4377018): 0x00400040, readback 0x00400040 [2025-09-24 02:40:19.862] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:40:19.879] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:40:19.958] Loaded PowerVR consumer services. [2025-09-24 02:40:20.118] Waiting data available... [2025-09-24 02:40:20.134] 512+0 records in [2025-09-24 02:40:20.134] 512+0 records out [2025-09-24 02:40:20.166] Starting syslogd/klogd: done [2025-09-24 02:40:20.182] DML Start [2025-09-24 02:40:20.358] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:40:20.598] DML res1: 0 [2025-09-24 02:40:20.949] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:40:20.949] Read Success [2025-09-24 02:40:20.965] Verifying certificate... [2025-09-24 02:40:21.173] Verified OK [2025-09-24 02:40:21.189] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:40:22.818] Verified OK [2025-09-24 02:40:22.818] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:40:23.442] Verified OK [2025-09-24 02:40:23.458] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:40:26.223] fs.protected_hardlinks = 1 [2025-09-24 02:40:26.239] fs.protected_symlinks = 1 [2025-09-24 02:40:26.239] kernel.modules_disabled = 1 [2025-09-24 02:40:26.431] [2025-09-24 02:40:26.431] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:40:27.629] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:40:35.433] SBL1:1210.0.1.0 [2025-09-24 02:40:35.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:40:37.047] SBL2:1210.0.1.0 [2025-09-24 02:40:37.095] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:40:37.207] j-A [2025-09-24 02:40:44.546] The R5 Autosar Classic is running [2025-09-24 02:40:44.572] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:40:44.572] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:40:45.180] INIT: version 2.96 booting [2025-09-24 02:40:45.291] INIT: Entering runlevel: 5 [2025-09-24 02:40:45.452] mtd24 attached [2025-09-24 02:40:45.452] mtd28 attached [2025-09-24 02:40:45.467] mtd32 attached [2025-09-24 02:40:45.515] ubi0:textures is mounted. [2025-09-24 02:40:45.515] RTNETLINK answers: File exists [2025-09-24 02:40:45.582] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:40:45.582] ubi1:animations is mounted. [2025-09-24 02:40:45.582] ubi2:dml_code is mounted. [2025-09-24 02:40:45.582] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:40:45.582] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:40:45.582] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:40:45.582] data.LB_FadeInType0=100 [2025-09-24 02:40:45.582] data.CHLH_FadeInType0=0 [2025-09-24 02:40:45.582] data.WU_FadeInDelay=0 [2025-09-24 02:40:45.582] max_time_out=0 [2025-09-24 02:40:45.582] No splash screen [2025-09-24 02:40:45.582] stop dss Done [2025-09-24 02:40:45.582] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:40:45.647] /dev/mem opened. [2025-09-24 02:40:45.647] Memory mapped at address 0xffff874e7000. [2025-09-24 02:40:45.647] Read at address 0x00600018 (0xffff874e7018): 0x00000000 [2025-09-24 02:40:45.647] Write at address 0x00600018 (0xffff874e7018): 0x00400040, readback 0x00400040 [2025-09-24 02:40:45.647] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:40:45.663] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:40:45.807] Loaded PowerVR consumer services. [2025-09-24 02:40:45.935] Waiting data available... [2025-09-24 02:40:45.951] 512+0 records in [2025-09-24 02:40:45.951] 512+0 records out [2025-09-24 02:40:45.966] Starting syslogd/klogd: done [2025-09-24 02:40:45.998] DML Start [2025-09-24 02:40:46.207] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:40:46.462] DML res1: 0 [2025-09-24 02:40:46.777] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:40:46.777] Read Success [2025-09-24 02:40:46.777] Verifying certificate... [2025-09-24 02:40:47.002] Verified OK [2025-09-24 02:40:47.002] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:40:48.728] Verified OK [2025-09-24 02:40:48.728] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:40:49.352] Verified OK [2025-09-24 02:40:49.352] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:40:52.053] fs.protected_hardlinks = 1 [2025-09-24 02:40:52.069] fs.protected_symlinks = 1 [2025-09-24 02:40:52.085] kernel.modules_disabled = 1 [2025-09-24 02:40:52.277] [2025-09-24 02:40:52.277] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:40:53.492] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:41:01.235] SBL1:1210.0.1.0 [2025-09-24 02:41:01.267] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:41:02.849] SBL2:1210.0.1.0 [2025-09-24 02:41:02.882] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:41:02.993] j-A [2025-09-24 02:41:10.365] The R5 Autosar Classic is running [2025-09-24 02:41:10.365] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:41:10.365] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:41:10.973] INIT: version 2.96 booting [2025-09-24 02:41:11.084] INIT: Entering runlevel: 5 [2025-09-24 02:41:11.228] mtd24 attached [2025-09-24 02:41:11.244] mtd32 attached [2025-09-24 02:41:11.260] mtd28 attached [2025-09-24 02:41:11.276] ubi0:textures is mounted. [2025-09-24 02:41:11.308] ubi1:dml_code is mounted. [2025-09-24 02:41:11.308] RTNETLINK answers: File exists [2025-09-24 02:41:11.365] ubi2:animations is mounted. [2025-09-24 02:41:11.365] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:41:11.365] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:41:11.365] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:41:11.365] data.LB_FadeInType0=100 [2025-09-24 02:41:11.365] data.CHLH_FadeInType0=0 [2025-09-24 02:41:11.365] data.WU_FadeInDelay=0 [2025-09-24 02:41:11.365] max_time_out=0 [2025-09-24 02:41:11.365] No splash screen [2025-09-24 02:41:11.365] stop dss Done [2025-09-24 02:41:11.365] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:41:11.365] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:41:11.453] /dev/mem opened. [2025-09-24 02:41:11.453] Memory mapped at address 0xffff88f23000. [2025-09-24 02:41:11.453] Read at address 0x00600018 (0xffff88f23018): 0x00000000 [2025-09-24 02:41:11.453] Write at address 0x00600018 (0xffff88f23018): 0x00400040, readback 0x00400040 [2025-09-24 02:41:11.453] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:41:11.453] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:41:11.533] Loaded PowerVR consumer services. [2025-09-24 02:41:11.709] Waiting data available... [2025-09-24 02:41:11.725] 512+0 records in [2025-09-24 02:41:11.725] 512+0 records out [2025-09-24 02:41:11.773] Starting syslogd/klogd: done [2025-09-24 02:41:11.789] DML Start [2025-09-24 02:41:11.981] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:41:12.205] DML res1: 0 [2025-09-24 02:41:12.581] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:41:12.581] Read Success [2025-09-24 02:41:12.581] Verifying certificate... [2025-09-24 02:41:12.805] Verified OK [2025-09-24 02:41:12.821] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:41:14.506] Verified OK [2025-09-24 02:41:14.506] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:41:15.130] Verified OK [2025-09-24 02:41:15.130] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:41:17.843] fs.protected_hardlinks = 1 [2025-09-24 02:41:17.843] fs.protected_symlinks = 1 [2025-09-24 02:41:17.843] kernel.modules_disabled = 1 [2025-09-24 02:41:18.033] [2025-09-24 02:41:18.033] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:41:19.265] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:41:27.037] SBL1:1210.0.1.0 [2025-09-24 02:41:27.085] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:41:28.651] SBL2:1210.0.1.0 [2025-09-24 02:41:28.699] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:41:28.796] j-A [2025-09-24 02:41:36.151] The R5 Autosar Classic is running [2025-09-24 02:41:36.174] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:41:36.174] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:41:36.781] INIT: version 2.96 booting [2025-09-24 02:41:36.893] INIT: Entering runlevel: 5 [2025-09-24 02:41:37.037] mtd28 attached [2025-09-24 02:41:37.053] mtd32 attached [2025-09-24 02:41:37.069] mtd24 attached [2025-09-24 02:41:37.117] RTNETLINK answers: File exists [2025-09-24 02:41:37.117] ubi0:animations is mounted. [2025-09-24 02:41:37.171] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:41:37.171] ubi1:dml_code is mounted. [2025-09-24 02:41:37.171] ubi2:textures is mounted. [2025-09-24 02:41:37.171] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:41:37.171] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:41:37.171] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:41:37.171] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:41:37.171] data.LB_FadeInType0=100 [2025-09-24 02:41:37.171] data.CHLH_FadeInType0=0 [2025-09-24 02:41:37.171] data.WU_FadeInDelay=0 [2025-09-24 02:41:37.171] max_time_out=0 [2025-09-24 02:41:37.171] No splash screen [2025-09-24 02:41:37.171] stop dss Done [2025-09-24 02:41:37.276] /dev/mem opened. [2025-09-24 02:41:37.276] Memory mapped at address 0xffffae354000. [2025-09-24 02:41:37.276] Read at address 0x00600018 (0xffffae354018): 0x00000000 [2025-09-24 02:41:37.276] Write at address 0x00600018 (0xffffae354018): 0x00400040, readback 0x00400040 [2025-09-24 02:41:37.276] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:41:37.276] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:41:37.436] Loaded PowerVR consumer services. [2025-09-24 02:41:37.547] Waiting data available... [2025-09-24 02:41:37.547] 512+0 records in [2025-09-24 02:41:37.547] 512+0 records out [2025-09-24 02:41:37.579] Starting syslogd/klogd: done [2025-09-24 02:41:37.595] DML Start [2025-09-24 02:41:37.739] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:41:37.963] DML res1: 0 [2025-09-24 02:41:38.459] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:41:38.474] Read Success [2025-09-24 02:41:38.474] Verifying certificate... [2025-09-24 02:41:38.730] Verified OK [2025-09-24 02:41:38.746] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:41:40.342] Verified OK [2025-09-24 02:41:40.342] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:41:40.900] Verified OK [2025-09-24 02:41:40.900] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:41:43.395] fs.protected_hardlinks = 1 [2025-09-24 02:41:43.411] fs.protected_symlinks = 1 [2025-09-24 02:41:43.411] kernel.modules_disabled = 1 [2025-09-24 02:41:43.602] [2025-09-24 02:41:43.602] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:41:45.031] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:41:52.808] SBL1:1210.0.1.0 [2025-09-24 02:41:52.856] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:41:54.422] SBL2:1210.0.1.0 [2025-09-24 02:41:54.470] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:41:54.567] j-A [2025-09-24 02:42:01.921] The R5 Autosar Classic is running [2025-09-24 02:42:01.945] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:42:01.945] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:42:02.553] INIT: version 2.96 booting [2025-09-24 02:42:02.664] INIT: Entering runlevel: 5 [2025-09-24 02:42:02.825] mtd32 attached [2025-09-24 02:42:02.825] mtd24 attached [2025-09-24 02:42:02.840] mtd28 attached [2025-09-24 02:42:02.923] ubi0:dml_code is mounted. [2025-09-24 02:42:02.923] RTNETLINK answers: File exists [2025-09-24 02:42:02.923] ubi1:textures is mounted. [2025-09-24 02:42:02.923] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:42:02.923] ubi2:animations is mounted. [2025-09-24 02:42:02.923] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:42:02.923] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:42:02.923] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:42:02.923] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:42:02.948] data.LB_FadeInType0=100 [2025-09-24 02:42:02.948] data.CHLH_FadeInType0=0 [2025-09-24 02:42:02.948] data.WU_FadeInDelay=0 [2025-09-24 02:42:02.948] max_time_out=0 [2025-09-24 02:42:02.948] No splash screen [2025-09-24 02:42:02.948] stop dss Done [2025-09-24 02:42:03.013] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:42:03.045] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:42:03.045] /dev/mem opened. [2025-09-24 02:42:03.045] Memory mapped at address 0xffffb1fdf000. [2025-09-24 02:42:03.045] Read at address 0x00600018 (0xffffb1fdf018): 0x00000000 [2025-09-24 02:42:03.045] Write at address 0x00600018 (0xffffb1fdf018): 0x00400040, readback 0x00400040 [2025-09-24 02:42:03.237] Loaded PowerVR consumer services. [2025-09-24 02:42:03.301] 512+0 records in [2025-09-24 02:42:03.301] 512+0 records out [2025-09-24 02:42:03.317] Waiting data available... [2025-09-24 02:42:03.333] Starting syslogd/klogd: done [2025-09-24 02:42:03.349] DML Start [2025-09-24 02:42:03.541] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:42:03.733] DML res1: 0 [2025-09-24 02:42:04.209] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:42:04.209] Read Success [2025-09-24 02:42:04.209] Verifying certificate... [2025-09-24 02:42:04.448] Verified OK [2025-09-24 02:42:04.481] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:42:06.192] Verified OK [2025-09-24 02:42:06.192] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:42:06.831] Verified OK [2025-09-24 02:42:06.831] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:42:09.390] fs.protected_hardlinks = 1 [2025-09-24 02:42:09.406] fs.protected_symlinks = 1 [2025-09-24 02:42:09.406] kernel.modules_disabled = 1 [2025-09-24 02:42:09.613] [2025-09-24 02:42:09.613] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:42:10.794] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:42:18.614] SBL1:1210.0.1.0 [2025-09-24 02:42:18.662] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:42:20.228] SBL2:1210.0.1.0 [2025-09-24 02:42:20.276] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:42:20.388] j-A [2025-09-24 02:42:27.726] The R5 Autosar Classic is running [2025-09-24 02:42:27.751] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:42:27.751] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:42:28.359] INIT: version 2.96 booting [2025-09-24 02:42:28.471] INIT: Entering runlevel: 5 [2025-09-24 02:42:28.615] mtd24 attached [2025-09-24 02:42:28.631] mtd28 attached [2025-09-24 02:42:28.647] mtd32 attached [2025-09-24 02:42:28.663] ubi0:textures is mounted. [2025-09-24 02:42:28.695] RTNETLINK answers: File exists [2025-09-24 02:42:28.749] ubi1:animations is mounted. [2025-09-24 02:42:28.749] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:42:28.749] ubi2:dml_code is mounted. [2025-09-24 02:42:28.749] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:42:28.749] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:42:28.749] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:42:28.749] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:42:28.749] data.LB_FadeInType0=100 [2025-09-24 02:42:28.749] data.CHLH_FadeInType0=0 [2025-09-24 02:42:28.749] data.WU_FadeInDelay=0 [2025-09-24 02:42:28.749] max_time_out=0 [2025-09-24 02:42:28.749] No splash screen [2025-09-24 02:42:28.749] stop dss Done [2025-09-24 02:42:28.796] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:42:28.829] /dev/mem opened. [2025-09-24 02:42:28.829] Memory mapped at address 0xffffaf7d9000. [2025-09-24 02:42:28.829] Read at address 0x00600018 (0xffffaf7d9018): 0x00000000 [2025-09-24 02:42:28.829] Write at address 0x00600018 (0xffffaf7d9018): 0x00400040, readback 0x00400040 [2025-09-24 02:42:28.829] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:42:29.053] Loaded PowerVR consumer services. [2025-09-24 02:42:29.101] Waiting data available... [2025-09-24 02:42:29.117] 512+0 records in [2025-09-24 02:42:29.117] 512+0 records out [2025-09-24 02:42:29.149] Starting syslogd/klogd: done [2025-09-24 02:42:29.182] DML Start [2025-09-24 02:42:29.325] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:42:29.517] DML res1: 0 [2025-09-24 02:42:30.077] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:42:30.098] Read Success [2025-09-24 02:42:30.098] Verifying certificate... [2025-09-24 02:42:30.322] Verified OK [2025-09-24 02:42:30.338] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:42:31.937] Verified OK [2025-09-24 02:42:31.953] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:42:32.528] Verified OK [2025-09-24 02:42:32.549] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:42:35.156] fs.protected_hardlinks = 1 [2025-09-24 02:42:35.172] fs.protected_symlinks = 1 [2025-09-24 02:42:35.172] kernel.modules_disabled = 1 [2025-09-24 02:42:35.380] [2025-09-24 02:42:35.380] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:42:36.605] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:42:44.413] SBL1:1210.0.1.0 [2025-09-24 02:42:44.445] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:42:46.029] SBL2:1210.0.1.0 [2025-09-24 02:42:46.061] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:42:46.172] j-A [2025-09-24 02:42:53.526] The R5 Autosar Classic is running [2025-09-24 02:42:53.526] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:42:53.547] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:42:54.154] INIT: version 2.96 booting [2025-09-24 02:42:54.266] INIT: Entering runlevel: 5 [2025-09-24 02:42:54.426] mtd24 attached [2025-09-24 02:42:54.426] mtd28 attached [2025-09-24 02:42:54.488] ubi0:textures is mounted. [2025-09-24 02:42:54.488] mtd32 attached [2025-09-24 02:42:54.488] ubi1:animations is mounted. [2025-09-24 02:42:54.504] RTNETLINK answers: File exists [2025-09-24 02:42:54.561] ubi2:dml_code is mounted. [2025-09-24 02:42:54.561] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:42:54.561] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:42:54.561] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:42:54.561] data.LB_FadeInType0=100 [2025-09-24 02:42:54.561] data.CHLH_FadeInType0=0 [2025-09-24 02:42:54.561] data.WU_FadeInDelay=0 [2025-09-24 02:42:54.561] max_time_out=0 [2025-09-24 02:42:54.561] No splash screen [2025-09-24 02:42:54.561] stop dss Done [2025-09-24 02:42:54.561] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:42:54.561] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:42:54.593] /dev/mem opened. [2025-09-24 02:42:54.593] Memory mapped at address 0xffffa208f000. [2025-09-24 02:42:54.619] Read at address 0x00600018 (0xffffa208f018): 0x00000000 [2025-09-24 02:42:54.619] Write at address 0x00600018 (0xffffa208f018): 0x00400040, readback 0x00400040 [2025-09-24 02:42:54.619] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:42:54.649] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:42:54.873] Loaded PowerVR consumer services. [2025-09-24 02:42:54.905] Waiting data available... [2025-09-24 02:42:54.937] 512+0 records in [2025-09-24 02:42:54.937] 512+0 records out [2025-09-24 02:42:54.985] Starting syslogd/klogd: done [2025-09-24 02:42:55.001] DML Start [2025-09-24 02:42:55.145] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:42:55.384] DML res1: 0 [2025-09-24 02:42:55.825] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:42:55.825] Read Success [2025-09-24 02:42:55.825] Verifying certificate... [2025-09-24 02:42:56.081] Verified OK [2025-09-24 02:42:56.097] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:42:57.600] Verified OK [2025-09-24 02:42:57.600] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:42:58.207] Verified OK [2025-09-24 02:42:58.207] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:43:00.767] fs.protected_hardlinks = 1 [2025-09-24 02:43:00.767] fs.protected_symlinks = 1 [2025-09-24 02:43:00.782] kernel.modules_disabled = 1 [2025-09-24 02:43:00.958] [2025-09-24 02:43:00.958] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:43:02.445] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:43:10.220] SBL1:1210.0.1.0 [2025-09-24 02:43:10.268] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:43:11.835] SBL2:1210.0.1.0 [2025-09-24 02:43:11.883] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:43:11.979] j-A [2025-09-24 02:43:19.332] The R5 Autosar Classic is running [2025-09-24 02:43:19.357] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:43:19.357] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:43:19.964] INIT: version 2.96 booting [2025-09-24 02:43:20.076] INIT: Entering runlevel: 5 [2025-09-24 02:43:20.221] mtd32 attached [2025-09-24 02:43:20.237] mtd28 attached [2025-09-24 02:43:20.237] mtd24 attached [2025-09-24 02:43:20.300] RTNETLINK answers: File exists [2025-09-24 02:43:20.360] ubi1:animations is mounted. [2025-09-24 02:43:20.360] ubi0:dml_code is mounted. [2025-09-24 02:43:20.360] ubi2:textures is mounted. [2025-09-24 02:43:20.360] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:43:20.360] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:43:20.360] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:43:20.360] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:43:20.360] data.LB_FadeInType0=100 [2025-09-24 02:43:20.360] data.CHLH_FadeInType0=0 [2025-09-24 02:43:20.360] data.WU_FadeInDelay=0 [2025-09-24 02:43:20.360] max_time_out=0 [2025-09-24 02:43:20.360] No splash screen [2025-09-24 02:43:20.360] stop dss Done [2025-09-24 02:43:20.360] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:43:20.392] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:43:20.425] /dev/mem opened. [2025-09-24 02:43:20.425] Memory mapped at address 0xffffb82a9000. [2025-09-24 02:43:20.425] Read at address 0x00600018 (0xffffb82a9018): 0x00000000 [2025-09-24 02:43:20.425] Write at address 0x00600018 (0xffffb82a9018): 0x00400040, readback 0x00400040 [2025-09-24 02:43:20.425] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:43:20.681] Loaded PowerVR consumer services. [2025-09-24 02:43:20.713] Waiting data available... [2025-09-24 02:43:20.729] 512+0 records in [2025-09-24 02:43:20.729] 512+0 records out [2025-09-24 02:43:20.777] Starting syslogd/klogd: done [2025-09-24 02:43:20.793] DML Start [2025-09-24 02:43:20.936] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:43:21.128] DML res1: 0 [2025-09-24 02:43:21.682] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:43:21.682] Read Success [2025-09-24 02:43:21.682] Verifying certificate... [2025-09-24 02:43:21.890] Verified OK [2025-09-24 02:43:21.906] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:43:23.626] Verified OK [2025-09-24 02:43:23.626] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:43:24.214] Verified OK [2025-09-24 02:43:24.214] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:43:26.772] fs.protected_hardlinks = 1 [2025-09-24 02:43:26.788] fs.protected_symlinks = 1 [2025-09-24 02:43:26.788] kernel.modules_disabled = 1 [2025-09-24 02:43:26.980] [2025-09-24 02:43:26.980] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:43:28.235] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:43:36.027] SBL1:1210.0.1.0 [2025-09-24 02:43:36.075] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:43:37.642] SBL2:1210.0.1.0 [2025-09-24 02:43:37.690] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:43:37.785] j-A [2025-09-24 02:43:45.140] The R5 Autosar Classic is running [2025-09-24 02:43:45.164] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:43:45.164] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:43:45.771] INIT: version 2.96 booting [2025-09-24 02:43:45.883] INIT: Entering runlevel: 5 [2025-09-24 02:43:46.043] mtd24 attached [2025-09-24 02:43:46.043] mtd28 attached [2025-09-24 02:43:46.059] mtd32 attached [2025-09-24 02:43:46.107] RTNETLINK answers: File exists [2025-09-24 02:43:46.107] ubi0:textures is mounted. [2025-09-24 02:43:46.146] ubi1:animations is mounted. [2025-09-24 02:43:46.146] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:43:46.146] ubi2:dml_code is mounted. [2025-09-24 02:43:46.146] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:43:46.146] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:43:46.146] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:43:46.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:43:46.167] data.LB_FadeInType0=100 [2025-09-24 02:43:46.167] data.CHLH_FadeInType0=0 [2025-09-24 02:43:46.167] data.WU_FadeInDelay=0 [2025-09-24 02:43:46.167] max_time_out=0 [2025-09-24 02:43:46.167] No splash screen [2025-09-24 02:43:46.167] stop dss Done [2025-09-24 02:43:46.215] /dev/mem opened. [2025-09-24 02:43:46.259] Memory mapped at address 0xffff89949000. [2025-09-24 02:43:46.259] Read at address 0x00600018 (0xffff89949018): 0x00000000 [2025-09-24 02:43:46.259] Write at address 0x00600018 (0xffff89949018): 0x00400040, readback 0x00400040 [2025-09-24 02:43:46.259] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:43:46.259] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:43:46.355] Loaded PowerVR consumer services. [2025-09-24 02:43:46.498] Waiting data available... [2025-09-24 02:43:46.514] 512+0 records in [2025-09-24 02:43:46.514] 512+0 records out [2025-09-24 02:43:46.530] Starting syslogd/klogd: done [2025-09-24 02:43:46.563] DML Start [2025-09-24 02:43:46.706] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:43:46.946] DML res1: 0 [2025-09-24 02:43:47.421] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:43:47.421] Read Success [2025-09-24 02:43:47.421] Verifying certificate... [2025-09-24 02:43:47.661] Verified OK [2025-09-24 02:43:47.693] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:43:49.420] Verified OK [2025-09-24 02:43:49.420] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:43:49.962] Verified OK [2025-09-24 02:43:49.962] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:43:52.407] fs.protected_hardlinks = 1 [2025-09-24 02:43:52.424] fs.protected_symlinks = 1 [2025-09-24 02:43:52.424] kernel.modules_disabled = 1 [2025-09-24 02:43:52.615] [2025-09-24 02:43:52.615] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:43:53.988] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:44:01.812] SBL1:1210.0.1.0 [2025-09-24 02:44:01.860] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:44:03.426] SBL2:1210.0.1.0 [2025-09-24 02:44:03.474] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:44:03.587] j-A [2025-09-24 02:44:10.925] The R5 Autosar Classic is running [2025-09-24 02:44:10.957] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:44:10.957] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:44:11.564] INIT: version 2.96 booting [2025-09-24 02:44:11.659] INIT: Entering runlevel: 5 [2025-09-24 02:44:11.819] mtd28 attached [2025-09-24 02:44:11.835] mtd32 attached [2025-09-24 02:44:11.835] mtd24 attached [2025-09-24 02:44:11.956] RTNETLINK answers: File exists [2025-09-24 02:44:11.956] ubi0:animations is mounted. [2025-09-24 02:44:11.956] ubi1:dml_code is mounted. [2025-09-24 02:44:11.956] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:44:11.956] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:44:11.956] ubi2:textures is mounted. [2025-09-24 02:44:11.956] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:44:11.956] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:44:11.956] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:44:11.956] data.LB_FadeInType0=100 [2025-09-24 02:44:11.956] data.CHLH_FadeInType0=0 [2025-09-24 02:44:11.956] data.WU_FadeInDelay=0 [2025-09-24 02:44:11.956] max_time_out=0 [2025-09-24 02:44:11.956] No splash screen [2025-09-24 02:44:11.956] stop dss Done [2025-09-24 02:44:12.023] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:44:12.023] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:44:12.023] /dev/mem opened. [2025-09-24 02:44:12.023] Memory mapped at address 0xffffab137000. [2025-09-24 02:44:12.023] Read at address 0x00600018 (0xffffab137018): 0x00000000 [2025-09-24 02:44:12.023] Write at address 0x00600018 (0xffffab137018): 0x00400040, readback 0x00400040 [2025-09-24 02:44:12.215] Loaded PowerVR consumer services. [2025-09-24 02:44:12.327] Waiting data available... [2025-09-24 02:44:12.343] 512+0 records in [2025-09-24 02:44:12.343] 512+0 records out [2025-09-24 02:44:12.375] Starting syslogd/klogd: done [2025-09-24 02:44:12.391] DML Start [2025-09-24 02:44:12.567] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:44:12.822] DML res1: 0 [2025-09-24 02:44:13.206] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:44:13.227] Read Success [2025-09-24 02:44:13.227] Verifying certificate... [2025-09-24 02:44:13.467] Verified OK [2025-09-24 02:44:13.483] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:44:15.177] Verified OK [2025-09-24 02:44:15.199] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:44:15.851] Verified OK [2025-09-24 02:44:15.851] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:44:18.440] fs.protected_hardlinks = 1 [2025-09-24 02:44:18.440] fs.protected_symlinks = 1 [2025-09-24 02:44:18.440] kernel.modules_disabled = 1 [2025-09-24 02:44:18.648] [2025-09-24 02:44:18.648] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:44:19.814] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:44:27.623] SBL1:1210.0.1.0 [2025-09-24 02:44:27.671] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:44:29.238] SBL2:1210.0.1.0 [2025-09-24 02:44:29.286] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:44:29.397] j-A [2025-09-24 02:44:36.737] The R5 Autosar Classic is running [2025-09-24 02:44:36.762] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:44:36.762] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:44:37.370] INIT: version 2.96 booting [2025-09-24 02:44:37.481] INIT: Entering runlevel: 5 [2025-09-24 02:44:37.641] mtd24 attached [2025-09-24 02:44:37.641] mtd28 attached [2025-09-24 02:44:37.657] mtd32 attached [2025-09-24 02:44:37.772] RTNETLINK answers: File exists [2025-09-24 02:44:37.772] ubi0:textures is mounted. [2025-09-24 02:44:37.772] ubi2:dml_code is mounted. [2025-09-24 02:44:37.772] ubi1:animations is mounted. [2025-09-24 02:44:37.772] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:44:37.772] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:44:37.772] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:44:37.772] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:44:37.772] data.LB_FadeInType0=100 [2025-09-24 02:44:37.772] data.CHLH_FadeInType0=0 [2025-09-24 02:44:37.772] data.WU_FadeInDelay=0 [2025-09-24 02:44:37.772] max_time_out=0 [2025-09-24 02:44:37.772] No splash screen [2025-09-24 02:44:37.772] stop dss Done [2025-09-24 02:44:37.772] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:44:37.830] /dev/mem opened. [2025-09-24 02:44:37.830] Memory mapped at address 0xffffa23bc000. [2025-09-24 02:44:37.830] Read at address 0x00600018 (0xffffa23bc018): 0x00000000 [2025-09-24 02:44:37.830] Write at address 0x00600018 (0xffffa23bc018): 0x00400040, readback 0x00400040 [2025-09-24 02:44:37.861] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:44:37.883] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:44:37.963] Loaded PowerVR consumer services. [2025-09-24 02:44:38.107] Waiting data available... [2025-09-24 02:44:38.123] 512+0 records in [2025-09-24 02:44:38.123] 512+0 records out [2025-09-24 02:44:38.154] Starting syslogd/klogd: done [2025-09-24 02:44:38.187] DML Start [2025-09-24 02:44:38.395] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:44:38.619] DML res1: 0 [2025-09-24 02:44:39.000] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:44:39.000] Read Success [2025-09-24 02:44:39.000] Verifying certificate... [2025-09-24 02:44:39.240] Verified OK [2025-09-24 02:44:39.256] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:44:40.897] Verified OK [2025-09-24 02:44:40.897] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:44:41.535] Verified OK [2025-09-24 02:44:41.535] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:44:44.220] fs.protected_hardlinks = 1 [2025-09-24 02:44:44.220] fs.protected_symlinks = 1 [2025-09-24 02:44:44.237] kernel.modules_disabled = 1 [2025-09-24 02:44:44.428] [2025-09-24 02:44:44.428] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:44:45.694] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:44:53.428] SBL1:1210.0.1.0 [2025-09-24 02:44:53.460] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:44:55.042] SBL2:1210.0.1.0 [2025-09-24 02:44:55.074] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:44:55.187] j-A [2025-09-24 02:45:02.558] The R5 Autosar Classic is running [2025-09-24 02:45:02.558] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:45:02.558] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:45:03.166] INIT: version 2.96 booting [2025-09-24 02:45:03.262] INIT: Entering runlevel: 5 [2025-09-24 02:45:03.422] mtd28 attached [2025-09-24 02:45:03.438] mtd24 attached [2025-09-24 02:45:03.454] mtd32 attached [2025-09-24 02:45:03.485] RTNETLINK answers: File exists [2025-09-24 02:45:03.524] ubi1:textures is mounted. [2025-09-24 02:45:03.524] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:45:03.524] ubi2:dml_code is mounted. [2025-09-24 02:45:03.524] ubi0:animations is mounted. [2025-09-24 02:45:03.524] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:45:03.524] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:45:03.524] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:45:03.524] data.LB_FadeInType0=100 [2025-09-24 02:45:03.550] data.CHLH_FadeInType0=0 [2025-09-24 02:45:03.550] data.WU_FadeInDelay=0 [2025-09-24 02:45:03.550] max_time_out=0 [2025-09-24 02:45:03.550] No splash screen [2025-09-24 02:45:03.550] stop dss Done [2025-09-24 02:45:03.550] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:45:03.598] /dev/mem opened. [2025-09-24 02:45:03.598] Memory mapped at address 0xffffb9e82000. [2025-09-24 02:45:03.624] Read at address 0x00600018 (0xffffb9e82018): 0x00000000 [2025-09-24 02:45:03.624] Write at address 0x00600018 (0xffffb9e82018): 0x00400040, readback 0x00400040 [2025-09-24 02:45:03.624] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:45:03.640] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:45:03.751] Loaded PowerVR consumer services. [2025-09-24 02:45:03.908] Waiting data available... [2025-09-24 02:45:03.908] 512+0 records in [2025-09-24 02:45:03.908] 512+0 records out [2025-09-24 02:45:03.925] Starting syslogd/klogd: done [2025-09-24 02:45:03.941] DML Start [2025-09-24 02:45:04.149] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:45:04.404] DML res1: 0 [2025-09-24 02:45:04.768] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:45:04.768] Read Success [2025-09-24 02:45:04.768] Verifying certificate... [2025-09-24 02:45:05.024] Verified OK [2025-09-24 02:45:05.040] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:45:06.773] Verified OK [2025-09-24 02:45:06.773] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:45:07.380] Verified OK [2025-09-24 02:45:07.380] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:45:10.018] fs.protected_hardlinks = 1 [2025-09-24 02:45:10.018] fs.protected_symlinks = 1 [2025-09-24 02:45:10.018] kernel.modules_disabled = 1 [2025-09-24 02:45:10.226] [2025-09-24 02:45:10.226] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:45:11.439] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:45:19.219] SBL1:1210.0.1.0 [2025-09-24 02:45:19.267] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:45:20.834] SBL2:1210.0.1.0 [2025-09-24 02:45:20.881] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:45:20.977] j-A [2025-09-24 02:45:28.333] The R5 Autosar Classic is running [2025-09-24 02:45:28.357] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:45:28.357] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:45:28.966] INIT: version 2.96 booting [2025-09-24 02:45:29.077] INIT: Entering runlevel: 5 [2025-09-24 02:45:29.237] mtd24 attached [2025-09-24 02:45:29.237] mtd28 attached [2025-09-24 02:45:29.252] mtd32 attached [2025-09-24 02:45:29.301] ubi0:textures is mounted. [2025-09-24 02:45:29.317] RTNETLINK answers: File exists [2025-09-24 02:45:29.317] ubi2:dml_code is mounted. [2025-09-24 02:45:29.373] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:45:29.373] ubi1:animations is mounted. [2025-09-24 02:45:29.373] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:45:29.373] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:45:29.373] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:45:29.373] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:45:29.373] data.LB_FadeInType0=100 [2025-09-24 02:45:29.373] data.CHLH_FadeInType0=0 [2025-09-24 02:45:29.373] data.WU_FadeInDelay=0 [2025-09-24 02:45:29.373] max_time_out=0 [2025-09-24 02:45:29.373] No splash screen [2025-09-24 02:45:29.373] stop dss Done [2025-09-24 02:45:29.389] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:45:29.411] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:45:29.453] /dev/mem opened. [2025-09-24 02:45:29.453] Memory mapped at address 0xffff878d8000. [2025-09-24 02:45:29.453] Read at address 0x00600018 (0xffff878d8018): 0x00000000 [2025-09-24 02:45:29.453] Write at address 0x00600018 (0xffff878d8018): 0x00400040, readback 0x00400040 [2025-09-24 02:45:29.533] Loaded PowerVR consumer services. [2025-09-24 02:45:29.708] Waiting data available... [2025-09-24 02:45:29.725] 512+0 records in [2025-09-24 02:45:29.725] 512+0 records out [2025-09-24 02:45:29.741] Starting syslogd/klogd: done [2025-09-24 02:45:29.773] DML Start [2025-09-24 02:45:29.917] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:45:30.141] DML res1: 0 [2025-09-24 02:45:30.621] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:45:30.621] Read Success [2025-09-24 02:45:30.636] Verifying certificate... [2025-09-24 02:45:30.956] Verified OK [2025-09-24 02:45:30.988] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:45:32.555] Verified OK [2025-09-24 02:45:32.578] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:45:33.122] Verified OK [2025-09-24 02:45:33.122] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:45:35.808] fs.protected_hardlinks = 1 [2025-09-24 02:45:35.808] fs.protected_symlinks = 1 [2025-09-24 02:45:35.824] kernel.modules_disabled = 1 [2025-09-24 02:45:36.031] [2025-09-24 02:45:36.031] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:45:37.208] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:45:45.002] SBL1:1210.0.1.0 [2025-09-24 02:45:45.050] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:45:46.617] SBL2:1210.0.1.0 [2025-09-24 02:45:46.665] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:45:46.777] j-A [2025-09-24 02:45:54.148] The R5 Autosar Classic is running [2025-09-24 02:45:54.148] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:45:54.148] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:45:54.756] INIT: version 2.96 booting [2025-09-24 02:45:54.868] INIT: Entering runlevel: 5 [2025-09-24 02:45:55.012] mtd24 attached [2025-09-24 02:45:55.028] mtd28 attached [2025-09-24 02:45:55.044] mtd32 attached [2025-09-24 02:45:55.076] ubi0:textures is mounted. [2025-09-24 02:45:55.144] RTNETLINK answers: File exists [2025-09-24 02:45:55.144] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:45:55.144] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:45:55.144] ubi1:animations is mounted. [2025-09-24 02:45:55.144] ubi2:dml_code is mounted. [2025-09-24 02:45:55.144] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:45:55.144] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:45:55.144] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:45:55.144] data.LB_FadeInType0=100 [2025-09-24 02:45:55.144] data.CHLH_FadeInType0=0 [2025-09-24 02:45:55.144] data.WU_FadeInDelay=0 [2025-09-24 02:45:55.144] max_time_out=0 [2025-09-24 02:45:55.144] No splash screen [2025-09-24 02:45:55.144] stop dss Done [2025-09-24 02:45:55.190] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:45:55.190] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:45:55.229] /dev/mem opened. [2025-09-24 02:45:55.229] Memory mapped at address 0xffff9a88a000. [2025-09-24 02:45:55.229] Read at address 0x00600018 (0xffff9a88a018): 0x00000000 [2025-09-24 02:45:55.229] Write at address 0x00600018 (0xffff9a88a018): 0x00400040, readback 0x00400040 [2025-09-24 02:45:55.468] Loaded PowerVR consumer services. [2025-09-24 02:45:55.524] Waiting data available... [2025-09-24 02:45:55.524] 512+0 records in [2025-09-24 02:45:55.524] 512+0 records out [2025-09-24 02:45:55.572] Starting syslogd/klogd: done [2025-09-24 02:45:55.588] DML Start [2025-09-24 02:45:55.748] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:45:56.003] DML res1: 0 [2025-09-24 02:45:56.305] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:45:56.305] Read Success [2025-09-24 02:45:56.305] Verifying certificate... [2025-09-24 02:45:56.609] Verified OK [2025-09-24 02:45:56.625] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:45:58.221] Verified OK [2025-09-24 02:45:58.221] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:45:58.858] Verified OK [2025-09-24 02:45:58.858] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:46:01.497] fs.protected_hardlinks = 1 [2025-09-24 02:46:01.513] fs.protected_symlinks = 1 [2025-09-24 02:46:01.513] kernel.modules_disabled = 1 [2025-09-24 02:46:01.704] [2025-09-24 02:46:01.704] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:46:03.109] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:46:10.812] SBL1:1210.0.1.0 [2025-09-24 02:46:10.860] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:46:12.427] SBL2:1210.0.1.0 [2025-09-24 02:46:12.475] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:46:12.572] j-A [2025-09-24 02:46:19.926] The R5 Autosar Classic is running [2025-09-24 02:46:19.951] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:46:19.951] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:46:20.558] INIT: version 2.96 booting [2025-09-24 02:46:20.670] INIT: Entering runlevel: 5 [2025-09-24 02:46:20.831] mtd28 attached [2025-09-24 02:46:20.847] mtd32 attached [2025-09-24 02:46:20.847] mtd24 attached [2025-09-24 02:46:20.895] ubi0:animations is mounted. [2025-09-24 02:46:20.910] ubi1:dml_code is mounted. [2025-09-24 02:46:20.910] RTNETLINK answers: File exists [2025-09-24 02:46:20.964] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:46:20.964] ubi2:textures is mounted. [2025-09-24 02:46:20.964] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:46:20.964] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:46:20.964] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:46:20.964] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:46:20.964] data.LB_FadeInType0=100 [2025-09-24 02:46:20.964] data.CHLH_FadeInType0=0 [2025-09-24 02:46:20.964] data.WU_FadeInDelay=0 [2025-09-24 02:46:20.964] max_time_out=0 [2025-09-24 02:46:20.964] No splash screen [2025-09-24 02:46:20.964] stop dss Done [2025-09-24 02:46:21.011] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:46:21.048] /dev/mem opened. [2025-09-24 02:46:21.048] Memory mapped at address 0xffff89769000. [2025-09-24 02:46:21.048] Read at address 0x00600018 (0xffff89769018): 0x00000000 [2025-09-24 02:46:21.048] Write at address 0x00600018 (0xffff89769018): 0x00400040, readback 0x00400040 [2025-09-24 02:46:21.048] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:46:21.224] Loaded PowerVR consumer services. [2025-09-24 02:46:21.336] Waiting data available... [2025-09-24 02:46:21.352] 512+0 records in [2025-09-24 02:46:21.352] 512+0 records out [2025-09-24 02:46:21.384] Starting syslogd/klogd: done [2025-09-24 02:46:21.384] DML Start [2025-09-24 02:46:21.560] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:46:21.816] DML res1: 0 [2025-09-24 02:46:22.224] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:46:22.224] Read Success [2025-09-24 02:46:22.224] Verifying certificate... [2025-09-24 02:46:22.513] Verified OK [2025-09-24 02:46:22.529] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:46:24.191] Verified OK [2025-09-24 02:46:24.191] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:46:24.799] Verified OK [2025-09-24 02:46:24.799] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:46:27.389] fs.protected_hardlinks = 1 [2025-09-24 02:46:27.419] fs.protected_symlinks = 1 [2025-09-24 02:46:27.419] kernel.modules_disabled = 1 [2025-09-24 02:46:27.612] [2025-09-24 02:46:27.612] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:46:28.806] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:46:36.596] SBL1:1210.0.1.0 [2025-09-24 02:46:36.628] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:46:38.211] SBL2:1210.0.1.0 [2025-09-24 02:46:38.242] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:46:38.354] j-A [2025-09-24 02:46:45.728] The R5 Autosar Classic is running [2025-09-24 02:46:45.728] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:46:45.728] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:46:46.335] INIT: version 2.96 booting [2025-09-24 02:46:46.447] INIT: Entering runlevel: 5 [2025-09-24 02:46:46.591] mtd28 attached [2025-09-24 02:46:46.607] mtd24 attached [2025-09-24 02:46:46.623] mtd32 attached [2025-09-24 02:46:46.655] ubi0:animations is mounted. [2025-09-24 02:46:46.671] ubi2:dml_code is mounted. [2025-09-24 02:46:46.671] RTNETLINK answers: File exists [2025-09-24 02:46:46.729] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:46:46.729] ubi1:textures is mounted. [2025-09-24 02:46:46.729] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:46:46.729] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:46:46.729] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:46:46.729] data.LB_FadeInType0=100 [2025-09-24 02:46:46.729] data.CHLH_FadeInType0=0 [2025-09-24 02:46:46.729] data.WU_FadeInDelay=0 [2025-09-24 02:46:46.729] max_time_out=0 [2025-09-24 02:46:46.729] No splash screen [2025-09-24 02:46:46.729] stop dss Done [2025-09-24 02:46:46.729] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:46:46.777] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:46:46.810] /dev/mem opened. [2025-09-24 02:46:46.810] Memory mapped at address 0xffff92791000. [2025-09-24 02:46:46.810] Read at address 0x00600018 (0xffff92791018): 0x00000000 [2025-09-24 02:46:46.810] Write at address 0x00600018 (0xffff92791018): 0x00400040, readback 0x00400040 [2025-09-24 02:46:46.810] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:46:47.066] Loaded PowerVR consumer services. [2025-09-24 02:46:47.082] Waiting data available... [2025-09-24 02:46:47.098] 512+0 records in [2025-09-24 02:46:47.098] 512+0 records out [2025-09-24 02:46:47.146] Starting syslogd/klogd: done [2025-09-24 02:46:47.161] DML Start [2025-09-24 02:46:47.354] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:46:47.625] DML res1: 0 [2025-09-24 02:46:47.976] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:46:47.976] Read Success [2025-09-24 02:46:47.976] Verifying certificate... [2025-09-24 02:46:48.199] Verified OK [2025-09-24 02:46:48.215] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:46:49.760] Verified OK [2025-09-24 02:46:49.760] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:46:50.406] Verified OK [2025-09-24 02:46:50.406] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:46:53.172] fs.protected_hardlinks = 1 [2025-09-24 02:46:53.188] fs.protected_symlinks = 1 [2025-09-24 02:46:53.188] kernel.modules_disabled = 1 [2025-09-24 02:46:53.381] [2025-09-24 02:46:53.381] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:46:54.689] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:47:02.376] SBL1:1210.0.1.0 [2025-09-24 02:47:02.408] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:47:03.991] SBL2:1210.0.1.0 [2025-09-24 02:47:04.022] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:47:04.135] j-A [2025-09-24 02:47:11.488] The R5 Autosar Classic is running [2025-09-24 02:47:11.488] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:47:11.509] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:47:12.116] INIT: version 2.96 booting [2025-09-24 02:47:12.229] INIT: Entering runlevel: 5 [2025-09-24 02:47:12.388] mtd32 attached [2025-09-24 02:47:12.388] mtd24 attached [2025-09-24 02:47:12.404] mtd28 attached [2025-09-24 02:47:12.452] RTNETLINK answers: File exists [2025-09-24 02:47:12.514] ubi0:dml_code is mounted. [2025-09-24 02:47:12.514] ubi1:textures is mounted. [2025-09-24 02:47:12.514] ubi2:animations is mounted. [2025-09-24 02:47:12.514] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:47:12.514] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:47:12.514] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:47:12.514] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:47:12.514] data.LB_FadeInType0=100 [2025-09-24 02:47:12.514] data.CHLH_FadeInType0=0 [2025-09-24 02:47:12.514] data.WU_FadeInDelay=0 [2025-09-24 02:47:12.514] max_time_out=0 [2025-09-24 02:47:12.514] No splash screen [2025-09-24 02:47:12.514] stop dss Done [2025-09-24 02:47:12.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:47:12.607] /dev/mem opened. [2025-09-24 02:47:12.607] Memory mapped at address 0xffff8747d000. [2025-09-24 02:47:12.607] Read at address 0x00600018 (0xffff8747d018): 0x00000000 [2025-09-24 02:47:12.607] Write at address 0x00600018 (0xffff8747d018): 0x00400040, readback 0x00400040 [2025-09-24 02:47:12.607] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:47:12.607] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:47:12.719] Loaded PowerVR consumer services. [2025-09-24 02:47:12.847] Waiting data available... [2025-09-24 02:47:12.863] 512+0 records in [2025-09-24 02:47:12.863] 512+0 records out [2025-09-24 02:47:12.911] Starting syslogd/klogd: done [2025-09-24 02:47:12.927] DML Start [2025-09-24 02:47:13.102] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:47:13.342] DML res1: 0 [2025-09-24 02:47:13.756] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:47:13.756] Read Success [2025-09-24 02:47:13.756] Verifying certificate... [2025-09-24 02:47:14.027] Verified OK [2025-09-24 02:47:14.059] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:47:15.754] Verified OK [2025-09-24 02:47:15.754] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:47:16.406] Verified OK [2025-09-24 02:47:16.406] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:47:18.997] fs.protected_hardlinks = 1 [2025-09-24 02:47:18.997] fs.protected_symlinks = 1 [2025-09-24 02:47:19.013] kernel.modules_disabled = 1 [2025-09-24 02:47:19.205] [2025-09-24 02:47:19.205] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:47:20.412] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:47:28.171] SBL1:1210.0.1.0 [2025-09-24 02:47:28.202] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:47:29.785] SBL2:1210.0.1.0 [2025-09-24 02:47:29.833] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:47:29.928] j-A [2025-09-24 02:47:37.282] The R5 Autosar Classic is running [2025-09-24 02:47:37.305] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:47:37.305] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:47:37.912] INIT: version 2.96 booting [2025-09-24 02:47:38.024] INIT: Entering runlevel: 5 [2025-09-24 02:47:38.184] mtd28 attached [2025-09-24 02:47:38.184] mtd24 attached [2025-09-24 02:47:38.200] mtd32 attached [2025-09-24 02:47:38.248] RTNETLINK answers: File exists [2025-09-24 02:47:38.319] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:47:38.319] ubi0:animations is mounted. [2025-09-24 02:47:38.319] ubi2:dml_code is mounted. [2025-09-24 02:47:38.319] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:47:38.319] ubi1:textures is mounted. [2025-09-24 02:47:38.319] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:47:38.319] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:47:38.319] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:47:38.319] data.LB_FadeInType0=100 [2025-09-24 02:47:38.319] data.CHLH_FadeInType0=0 [2025-09-24 02:47:38.319] data.WU_FadeInDelay=0 [2025-09-24 02:47:38.319] max_time_out=0 [2025-09-24 02:47:38.319] No splash screen [2025-09-24 02:47:38.319] stop dss Done [2025-09-24 02:47:38.389] /dev/mem opened. [2025-09-24 02:47:38.389] Memory mapped at address 0xffffb826a000. [2025-09-24 02:47:38.389] Read at address 0x00600018 (0xffffb826a018): 0x00000000 [2025-09-24 02:47:38.389] Write at address 0x00600018 (0xffffb826a018): 0x00400040, readback 0x00400040 [2025-09-24 02:47:38.389] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:47:38.389] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:47:38.549] Loaded PowerVR consumer services. [2025-09-24 02:47:38.677] Waiting data available... [2025-09-24 02:47:38.693] 512+0 records in [2025-09-24 02:47:38.693] 512+0 records out [2025-09-24 02:47:38.724] Starting syslogd/klogd: done [2025-09-24 02:47:38.740] DML Start [2025-09-24 02:47:38.885] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:47:39.156] DML res1: 0 [2025-09-24 02:47:39.604] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:47:39.625] Read Success [2025-09-24 02:47:39.625] Verifying certificate... [2025-09-24 02:47:39.864] Verified OK [2025-09-24 02:47:39.880] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:47:41.519] Verified OK [2025-09-24 02:47:41.519] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:47:42.127] Verified OK [2025-09-24 02:47:42.143] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:47:44.685] fs.protected_hardlinks = 1 [2025-09-24 02:47:44.701] fs.protected_symlinks = 1 [2025-09-24 02:47:44.701] kernel.modules_disabled = 1 [2025-09-24 02:47:44.909] [2025-09-24 02:47:44.909] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:47:46.170] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:47:53.976] SBL1:1210.0.1.0 [2025-09-24 02:47:54.008] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:47:55.591] SBL2:1210.0.1.0 [2025-09-24 02:47:55.622] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:47:55.735] j-A [2025-09-24 02:48:03.108] The R5 Autosar Classic is running [2025-09-24 02:48:03.108] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:48:03.108] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:48:03.716] INIT: version 2.96 booting [2025-09-24 02:48:03.828] INIT: Entering runlevel: 5 [2025-09-24 02:48:03.987] mtd24 attached [2025-09-24 02:48:03.987] mtd28 attached [2025-09-24 02:48:04.003] mtd32 attached [2025-09-24 02:48:04.051] ubi0:textures is mounted. [2025-09-24 02:48:04.051] RTNETLINK answers: File exists [2025-09-24 02:48:04.118] ubi1:animations is mounted. [2025-09-24 02:48:04.118] ubi2:dml_code is mounted. [2025-09-24 02:48:04.118] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:48:04.118] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:48:04.118] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:48:04.118] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:48:04.118] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:48:04.118] data.LB_FadeInType0=100 [2025-09-24 02:48:04.118] data.CHLH_FadeInType0=0 [2025-09-24 02:48:04.118] data.WU_FadeInDelay=0 [2025-09-24 02:48:04.118] max_time_out=0 [2025-09-24 02:48:04.118] No splash screen [2025-09-24 02:48:04.118] stop dss Done [2025-09-24 02:48:04.166] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:48:04.166] /dev/mem opened. [2025-09-24 02:48:04.198] Memory mapped at address 0xffffb0224000. [2025-09-24 02:48:04.198] Read at address 0x00600018 (0xffffb0224018): 0x00000000 [2025-09-24 02:48:04.198] Write at address 0x00600018 (0xffffb0224018): 0x00400040, readback 0x00400040 [2025-09-24 02:48:04.198] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:48:04.309] Loaded PowerVR consumer services. [2025-09-24 02:48:04.469] Waiting data available... [2025-09-24 02:48:04.485] 512+0 records in [2025-09-24 02:48:04.485] 512+0 records out [2025-09-24 02:48:04.533] Starting syslogd/klogd: done [2025-09-24 02:48:04.549] DML Start [2025-09-24 02:48:04.740] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:48:04.964] DML res1: 0 [2025-09-24 02:48:05.333] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:48:05.349] Read Success [2025-09-24 02:48:05.349] Verifying certificate... [2025-09-24 02:48:05.588] Verified OK [2025-09-24 02:48:05.620] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:48:07.187] Verified OK [2025-09-24 02:48:07.187] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:48:07.900] Verified OK [2025-09-24 02:48:07.900] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:48:10.617] fs.protected_hardlinks = 1 [2025-09-24 02:48:10.633] fs.protected_symlinks = 1 [2025-09-24 02:48:10.633] kernel.modules_disabled = 1 [2025-09-24 02:48:10.825] [2025-09-24 02:48:10.825] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:48:11.984] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:48:19.753] SBL1:1210.0.1.0 [2025-09-24 02:48:19.785] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:48:21.368] SBL2:1210.0.1.0 [2025-09-24 02:48:21.400] OTP value is: rxDLL 23, txDLL 38, rdDelay 1 [2025-09-24 02:48:21.511] j-A [2025-09-24 02:48:28.885] The R5 Autosar Classic is running [2025-09-24 02:48:28.885] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:48:28.885] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:48:29.492] INIT: version 2.96 booting [2025-09-24 02:48:29.604] INIT: Entering runlevel: 5 [2025-09-24 02:48:29.764] mtd28 attached [2025-09-24 02:48:29.764] mtd32 attached [2025-09-24 02:48:29.780] mtd24 attached [2025-09-24 02:48:29.828] RTNETLINK answers: File exists [2025-09-24 02:48:29.894] ubi0:animations is mounted. [2025-09-24 02:48:29.894] ubi1:dml_code is mounted. [2025-09-24 02:48:29.894] ubi2:textures is mounted. [2025-09-24 02:48:29.894] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:48:29.894] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:48:29.894] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:48:29.894] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:48:29.894] data.LB_FadeInType0=100 [2025-09-24 02:48:29.894] data.CHLH_FadeInType0=0 [2025-09-24 02:48:29.894] data.WU_FadeInDelay=0 [2025-09-24 02:48:29.894] max_time_out=0 [2025-09-24 02:48:29.894] No splash screen [2025-09-24 02:48:29.894] stop dss Done [2025-09-24 02:48:29.894] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:48:29.942] /dev/mem opened. [2025-09-24 02:48:29.942] Memory mapped at address 0xffffb9ead000. [2025-09-24 02:48:29.980] Read at address 0x00600018 (0xffffb9ead018): 0x00000000 [2025-09-24 02:48:29.980] Write at address 0x00600018 (0xffffb9ead018): 0x00400040, readback 0x00400040 [2025-09-24 02:48:29.980] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:48:29.980] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:48:30.251] Waiting data available... [2025-09-24 02:48:30.267] Loaded PowerVR consumer services. [2025-09-24 02:48:30.299] 512+0 records in [2025-09-24 02:48:30.299] 512+0 records out [2025-09-24 02:48:30.331] Starting syslogd/klogd: done [2025-09-24 02:48:30.331] DML Start [2025-09-24 02:48:30.523] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:48:30.746] DML res1: 0 [2025-09-24 02:48:31.205] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:48:31.205] Read Success [2025-09-24 02:48:31.205] Verifying certificate... [2025-09-24 02:48:31.445] Verified OK [2025-09-24 02:48:31.461] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:48:33.147] Verified OK [2025-09-24 02:48:33.147] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:48:33.776] Verified OK [2025-09-24 02:48:33.776] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:48:36.333] fs.protected_hardlinks = 1 [2025-09-24 02:48:36.333] fs.protected_symlinks = 1 [2025-09-24 02:48:36.349] kernel.modules_disabled = 1 [2025-09-24 02:48:36.541] [2025-09-24 02:48:36.541] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:48:37.763] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:48:45.523] SBL1:1210.0.1.0 [2025-09-24 02:48:45.571] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:48:47.137] SBL2:1210.0.1.0 [2025-09-24 02:48:47.185] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:48:47.282] j-A [2025-09-24 02:48:54.637] The R5 Autosar Classic is running [2025-09-24 02:48:54.660] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:48:54.660] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:48:55.266] INIT: version 2.96 booting [2025-09-24 02:48:55.378] INIT: Entering runlevel: 5 [2025-09-24 02:48:55.539] mtd28 attached [2025-09-24 02:48:55.555] mtd32 attached [2025-09-24 02:48:55.555] mtd24 attached [2025-09-24 02:48:55.603] RTNETLINK answers: File exists [2025-09-24 02:48:55.644] ubi0:animations is mounted. [2025-09-24 02:48:55.644] ubi2:textures is mounted. [2025-09-24 02:48:55.644] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:48:55.644] ubi1:dml_code is mounted. [2025-09-24 02:48:55.644] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:48:55.644] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:48:55.644] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:48:55.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:48:55.667] data.LB_FadeInType0=100 [2025-09-24 02:48:55.667] data.CHLH_FadeInType0=0 [2025-09-24 02:48:55.667] data.WU_FadeInDelay=0 [2025-09-24 02:48:55.667] max_time_out=0 [2025-09-24 02:48:55.667] No splash screen [2025-09-24 02:48:55.667] stop dss Done [2025-09-24 02:48:55.715] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:48:55.752] /dev/mem opened. [2025-09-24 02:48:55.752] Memory mapped at address 0xffff8be86000. [2025-09-24 02:48:55.752] Read at address 0x00600018 (0xffff8be86018): 0x00000000 [2025-09-24 02:48:55.752] Write at address 0x00600018 (0xffff8be86018): 0x00400040, readback 0x00400040 [2025-09-24 02:48:55.752] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:48:55.864] Loaded PowerVR consumer services. [2025-09-24 02:48:56.008] Waiting data available... [2025-09-24 02:48:56.024] 512+0 records in [2025-09-24 02:48:56.024] 512+0 records out [2025-09-24 02:48:56.072] Starting syslogd/klogd: done [2025-09-24 02:48:56.088] DML Start [2025-09-24 02:48:56.264] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:48:56.488] DML res1: 0 [2025-09-24 02:48:56.919] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:48:56.919] Read Success [2025-09-24 02:48:56.919] Verifying certificate... [2025-09-24 02:48:57.158] Verified OK [2025-09-24 02:48:57.174] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:48:58.868] Verified OK [2025-09-24 02:48:58.868] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:48:59.507] Verified OK [2025-09-24 02:48:59.507] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:49:02.097] fs.protected_hardlinks = 1 [2025-09-24 02:49:02.097] fs.protected_symlinks = 1 [2025-09-24 02:49:02.113] kernel.modules_disabled = 1 [2025-09-24 02:49:02.305] [2025-09-24 02:49:02.305] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:49:03.517] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:49:11.316] SBL1:1210.0.1.0 [2025-09-24 02:49:11.364] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:49:12.931] SBL2:1210.0.1.0 [2025-09-24 02:49:12.979] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:49:13.091] j-A [2025-09-24 02:49:20.430] The R5 Autosar Classic is running [2025-09-24 02:49:20.456] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:49:20.456] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:49:21.063] INIT: version 2.96 booting [2025-09-24 02:49:21.175] INIT: Entering runlevel: 5 [2025-09-24 02:49:21.319] mtd28 attached [2025-09-24 02:49:21.335] mtd32 attached [2025-09-24 02:49:21.335] mtd24 attached [2025-09-24 02:49:21.383] ubi0:animations is mounted. [2025-09-24 02:49:21.458] ubi2:textures is mounted. [2025-09-24 02:49:21.458] RTNETLINK answers: File exists [2025-09-24 02:49:21.458] ubi1:dml_code is mounted. [2025-09-24 02:49:21.458] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:49:21.458] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:49:21.458] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:49:21.458] data.LB_FadeInType0=100 [2025-09-24 02:49:21.458] data.CHLH_FadeInType0=0 [2025-09-24 02:49:21.458] data.WU_FadeInDelay=0 [2025-09-24 02:49:21.458] max_time_out=0 [2025-09-24 02:49:21.458] No splash screen [2025-09-24 02:49:21.458] stop dss Done [2025-09-24 02:49:21.458] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:49:21.458] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:49:21.517] /dev/mem opened. [2025-09-24 02:49:21.517] Memory mapped at address 0xffffb33f5000. [2025-09-24 02:49:21.517] Read at address 0x00600018 (0xffffb33f5018): 0x00000000 [2025-09-24 02:49:21.517] Write at address 0x00600018 (0xffffb33f5018): 0x00400040, readback 0x00400040 [2025-09-24 02:49:21.548] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:49:21.564] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:49:21.816] Waiting data available... [2025-09-24 02:49:21.816] Loaded PowerVR consumer services. [2025-09-24 02:49:21.848] 512+0 records in [2025-09-24 02:49:21.848] 512+0 records out [2025-09-24 02:49:21.879] Starting syslogd/klogd: done [2025-09-24 02:49:21.895] DML Start [2025-09-24 02:49:22.072] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:49:22.311] DML res1: 0 [2025-09-24 02:49:22.706] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:49:22.706] Read Success [2025-09-24 02:49:22.706] Verifying certificate... [2025-09-24 02:49:22.962] Verified OK [2025-09-24 02:49:22.978] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:49:24.589] Verified OK [2025-09-24 02:49:24.589] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:49:25.245] Verified OK [2025-09-24 02:49:25.266] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:49:27.984] fs.protected_hardlinks = 1 [2025-09-24 02:49:27.984] fs.protected_symlinks = 1 [2025-09-24 02:49:28.000] kernel.modules_disabled = 1 [2025-09-24 02:49:28.192] [2025-09-24 02:49:28.192] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:49:29.385] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:49:37.131] SBL1:1210.0.1.0 [2025-09-24 02:49:37.178] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:49:38.744] SBL2:1210.0.1.0 [2025-09-24 02:49:38.792] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:49:38.904] j-A [2025-09-24 02:49:46.244] The R5 Autosar Classic is running [2025-09-24 02:49:46.269] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:49:46.269] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:49:46.876] INIT: version 2.96 booting [2025-09-24 02:49:46.989] INIT: Entering runlevel: 5 [2025-09-24 02:49:47.132] mtd24 attached [2025-09-24 02:49:47.148] mtd28 attached [2025-09-24 02:49:47.164] mtd32 attached [2025-09-24 02:49:47.223] ubi1:animations is mounted. [2025-09-24 02:49:47.223] RTNETLINK answers: File exists [2025-09-24 02:49:47.223] ubi0:textures is mounted. [2025-09-24 02:49:47.223] ubi2:dml_code is mounted. [2025-09-24 02:49:47.223] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:49:47.270] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:49:47.270] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:49:47.270] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:49:47.270] data.LB_FadeInType0=100 [2025-09-24 02:49:47.270] data.CHLH_FadeInType0=0 [2025-09-24 02:49:47.270] data.WU_FadeInDelay=0 [2025-09-24 02:49:47.270] max_time_out=0 [2025-09-24 02:49:47.270] No splash screen [2025-09-24 02:49:47.270] stop dss Done [2025-09-24 02:49:47.270] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:49:47.318] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:49:47.349] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:49:47.349] /dev/mem opened. [2025-09-24 02:49:47.349] Memory mapped at address 0xffffadae9000. [2025-09-24 02:49:47.349] Read at address 0x00600018 (0xffffadae9018): 0x00000000 [2025-09-24 02:49:47.349] Write at address 0x00600018 (0xffffadae9018): 0x00400040, readback 0x00400040 [2025-09-24 02:49:47.589] Loaded PowerVR consumer services. [2025-09-24 02:49:47.637] Waiting data available... [2025-09-24 02:49:47.653] 512+0 records in [2025-09-24 02:49:47.653] 512+0 records out [2025-09-24 02:49:47.685] Starting syslogd/klogd: done [2025-09-24 02:49:47.701] DML Start [2025-09-24 02:49:47.909] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:49:48.117] DML res1: 0 [2025-09-24 02:49:48.517] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:49:48.517] Read Success [2025-09-24 02:49:48.533] Verifying certificate... [2025-09-24 02:49:48.789] Verified OK [2025-09-24 02:49:48.805] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:49:50.467] Verified OK [2025-09-24 02:49:50.467] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:49:51.075] Verified OK [2025-09-24 02:49:51.075] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:49:53.729] fs.protected_hardlinks = 1 [2025-09-24 02:49:53.745] fs.protected_symlinks = 1 [2025-09-24 02:49:53.745] kernel.modules_disabled = 1 [2025-09-24 02:49:53.953] [2025-09-24 02:49:53.953] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:49:55.145] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:50:02.945] SBL1:1210.0.1.0 [2025-09-24 02:50:02.977] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:50:04.559] SBL2:1210.0.1.0 [2025-09-24 02:50:04.591] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:50:04.704] j-A [2025-09-24 02:50:12.077] The R5 Autosar Classic is running [2025-09-24 02:50:12.077] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:50:12.077] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:50:12.685] INIT: version 2.96 booting [2025-09-24 02:50:12.796] INIT: Entering runlevel: 5 [2025-09-24 02:50:12.956] mtd32 attached [2025-09-24 02:50:12.956] mtd24 attached [2025-09-24 02:50:12.972] mtd28 attached [2025-09-24 02:50:12.988] ubi0:dml_code is mounted. [2025-09-24 02:50:13.020] RTNETLINK answers: File exists [2025-09-24 02:50:13.078] ubi1:textures is mounted. [2025-09-24 02:50:13.078] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:50:13.078] ubi2:animations is mounted. [2025-09-24 02:50:13.078] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:50:13.078] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:50:13.078] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:50:13.078] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:50:13.078] data.LB_FadeInType0=100 [2025-09-24 02:50:13.078] data.CHLH_FadeInType0=0 [2025-09-24 02:50:13.078] data.WU_FadeInDelay=0 [2025-09-24 02:50:13.078] max_time_out=0 [2025-09-24 02:50:13.078] No splash screen [2025-09-24 02:50:13.078] stop dss Done [2025-09-24 02:50:13.160] /dev/mem opened. [2025-09-24 02:50:13.160] Memory mapped at address 0xffff93678000. [2025-09-24 02:50:13.160] Read at address 0x00600018 (0xffff93678018): 0x00000000 [2025-09-24 02:50:13.160] Write at address 0x00600018 (0xffff93678018): 0x00400040, readback 0x00400040 [2025-09-24 02:50:13.191] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:50:13.220] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:50:13.455] Waiting data available... [2025-09-24 02:50:13.455] Loaded PowerVR consumer services. [2025-09-24 02:50:13.471] 512+0 records in [2025-09-24 02:50:13.471] 512+0 records out [2025-09-24 02:50:13.519] Starting syslogd/klogd: done [2025-09-24 02:50:13.534] DML Start [2025-09-24 02:50:13.727] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:50:13.903] DML res1: 0 [2025-09-24 02:50:14.344] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:50:14.344] Read Success [2025-09-24 02:50:14.344] Verifying certificate... [2025-09-24 02:50:14.584] Verified OK [2025-09-24 02:50:14.600] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:50:16.238] Verified OK [2025-09-24 02:50:16.238] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:50:16.893] Verified OK [2025-09-24 02:50:16.893] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:50:19.436] fs.protected_hardlinks = 1 [2025-09-24 02:50:19.452] fs.protected_symlinks = 1 [2025-09-24 02:50:19.452] kernel.modules_disabled = 1 [2025-09-24 02:50:19.643] [2025-09-24 02:50:19.643] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:50:20.954] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:50:28.713] SBL1:1210.0.1.0 [2025-09-24 02:50:28.744] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:50:30.327] SBL2:1210.0.1.0 [2025-09-24 02:50:30.375] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:50:30.471] j-A [2025-09-24 02:50:37.826] The R5 Autosar Classic is running [2025-09-24 02:50:37.847] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:50:37.847] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:50:38.455] INIT: version 2.96 booting [2025-09-24 02:50:38.566] INIT: Entering runlevel: 5 [2025-09-24 02:50:38.710] mtd24 attached [2025-09-24 02:50:38.726] mtd28 attached [2025-09-24 02:50:38.742] mtd32 attached [2025-09-24 02:50:38.790] RTNETLINK answers: File exists [2025-09-24 02:50:38.845] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:50:38.845] ubi0:textures is mounted. [2025-09-24 02:50:38.845] ubi2:dml_code is mounted. [2025-09-24 02:50:38.845] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:50:38.845] ubi1:animations is mounted. [2025-09-24 02:50:38.845] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:50:38.845] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:50:38.845] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:50:38.845] data.LB_FadeInType0=100 [2025-09-24 02:50:38.845] data.CHLH_FadeInType0=0 [2025-09-24 02:50:38.845] data.WU_FadeInDelay=0 [2025-09-24 02:50:38.845] max_time_out=0 [2025-09-24 02:50:38.845] No splash screen [2025-09-24 02:50:38.845] stop dss Done [2025-09-24 02:50:38.886] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:50:38.886] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:50:38.886] /dev/mem opened. [2025-09-24 02:50:38.886] Memory mapped at address 0xffff8da93000. [2025-09-24 02:50:38.911] Read at address 0x00600018 (0xffff8da93018): 0x00000000 [2025-09-24 02:50:38.911] Write at address 0x00600018 (0xffff8da93018): 0x00400040, readback 0x00400040 [2025-09-24 02:50:39.039] Loaded PowerVR consumer services. [2025-09-24 02:50:39.183] Waiting data available... [2025-09-24 02:50:39.215] 512+0 records in [2025-09-24 02:50:39.215] 512+0 records out [2025-09-24 02:50:39.263] Starting syslogd/klogd: done [2025-09-24 02:50:39.279] DML Start [2025-09-24 02:50:39.438] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:50:39.647] DML res1: 0 [2025-09-24 02:50:40.166] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:50:40.166] Read Success [2025-09-24 02:50:40.166] Verifying certificate... [2025-09-24 02:50:40.406] Verified OK [2025-09-24 02:50:40.422] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:50:42.063] Verified OK [2025-09-24 02:50:42.063] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:50:42.703] Verified OK [2025-09-24 02:50:42.724] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:50:45.282] fs.protected_hardlinks = 1 [2025-09-24 02:50:45.298] fs.protected_symlinks = 1 [2025-09-24 02:50:45.298] kernel.modules_disabled = 1 [2025-09-24 02:50:45.506] [2025-09-24 02:50:45.506] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:50:46.733] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:50:54.520] SBL1:1210.0.1.0 [2025-09-24 02:50:54.568] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:50:56.135] SBL2:1210.0.1.0 [2025-09-24 02:50:56.182] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:50:56.294] j-A [2025-09-24 02:51:03.632] The R5 Autosar Classic is running [2025-09-24 02:51:03.657] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:51:03.657] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:51:04.265] INIT: version 2.96 booting [2025-09-24 02:51:04.378] INIT: Entering runlevel: 5 [2025-09-24 02:51:04.521] mtd24 attached [2025-09-24 02:51:04.537] mtd32 attached [2025-09-24 02:51:04.570] mtd28 attached [2025-09-24 02:51:04.570] ubi0:textures is mounted. [2025-09-24 02:51:04.602] ubi1:dml_code is mounted. [2025-09-24 02:51:04.602] RTNETLINK answers: File exists [2025-09-24 02:51:04.661] ubi2:animations is mounted. [2025-09-24 02:51:04.661] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:51:04.661] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:51:04.661] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:51:04.661] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:51:04.661] data.LB_FadeInType0=100 [2025-09-24 02:51:04.661] data.CHLH_FadeInType0=0 [2025-09-24 02:51:04.661] data.WU_FadeInDelay=0 [2025-09-24 02:51:04.661] max_time_out=0 [2025-09-24 02:51:04.661] No splash screen [2025-09-24 02:51:04.661] stop dss Done [2025-09-24 02:51:04.661] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:51:04.693] /dev/mem opened. [2025-09-24 02:51:04.719] Memory mapped at address 0xffff887a6000. [2025-09-24 02:51:04.719] Read at address 0x00600018 (0xffff887a6018): 0x00000000 [2025-09-24 02:51:04.719] Write at address 0x00600018 (0xffff887a6018): 0x00400040, readback 0x00400040 [2025-09-24 02:51:04.735] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:51:04.751] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:51:04.878] Loaded PowerVR consumer services. [2025-09-24 02:51:05.007] Waiting data available... [2025-09-24 02:51:05.023] 512+0 records in [2025-09-24 02:51:05.023] 512+0 records out [2025-09-24 02:51:05.054] Starting syslogd/klogd: done [2025-09-24 02:51:05.070] DML Start [2025-09-24 02:51:05.263] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:51:05.471] DML res1: 0 [2025-09-24 02:51:05.966] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:51:05.982] Read Success [2025-09-24 02:51:05.982] Verifying certificate... [2025-09-24 02:51:06.206] Verified OK [2025-09-24 02:51:06.238] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:51:07.940] Verified OK [2025-09-24 02:51:07.940] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:51:08.460] Verified OK [2025-09-24 02:51:08.460] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:51:10.922] fs.protected_hardlinks = 1 [2025-09-24 02:51:10.938] fs.protected_symlinks = 1 [2025-09-24 02:51:10.938] kernel.modules_disabled = 1 [2025-09-24 02:51:11.146] [2025-09-24 02:51:11.146] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:51:12.493] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:51:20.315] SBL1:1210.0.1.0 [2025-09-24 02:51:20.363] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:51:21.930] SBL2:1210.0.1.0 [2025-09-24 02:51:21.978] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:51:22.089] j-A [2025-09-24 02:51:29.427] The R5 Autosar Classic is running [2025-09-24 02:51:29.452] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:51:29.452] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:51:30.059] INIT: version 2.96 booting [2025-09-24 02:51:30.171] INIT: Entering runlevel: 5 [2025-09-24 02:51:30.331] mtd28 attached [2025-09-24 02:51:30.331] mtd24 attached [2025-09-24 02:51:30.379] mtd32 attached [2025-09-24 02:51:30.379] ubi0:animations is mounted. [2025-09-24 02:51:30.395] ubi1:textures is mounted. [2025-09-24 02:51:30.395] RTNETLINK answers: File exists [2025-09-24 02:51:30.455] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:51:30.455] ubi2:dml_code is mounted. [2025-09-24 02:51:30.455] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:51:30.455] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:51:30.455] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:51:30.455] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:51:30.455] data.LB_FadeInType0=100 [2025-09-24 02:51:30.455] data.CHLH_FadeInType0=0 [2025-09-24 02:51:30.455] data.WU_FadeInDelay=0 [2025-09-24 02:51:30.455] max_time_out=0 [2025-09-24 02:51:30.455] No splash screen [2025-09-24 02:51:30.455] stop dss Done [2025-09-24 02:51:30.487] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:51:30.532] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:51:30.532] /dev/mem opened. [2025-09-24 02:51:30.532] Memory mapped at address 0xffff9d52a000. [2025-09-24 02:51:30.532] Read at address 0x00600018 (0xffff9d52a018): 0x00000000 [2025-09-24 02:51:30.532] Write at address 0x00600018 (0xffff9d52a018): 0x00400040, readback 0x00400040 [2025-09-24 02:51:30.740] Loaded PowerVR consumer services. [2025-09-24 02:51:30.820] Waiting data available... [2025-09-24 02:51:30.820] 512+0 records in [2025-09-24 02:51:30.836] 512+0 records out [2025-09-24 02:51:30.851] Starting syslogd/klogd: done [2025-09-24 02:51:30.867] DML Start [2025-09-24 02:51:31.059] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:51:31.284] DML res1: 0 [2025-09-24 02:51:31.667] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:51:31.667] Read Success [2025-09-24 02:51:31.683] Verifying certificate... [2025-09-24 02:51:31.907] Verified OK [2025-09-24 02:51:31.923] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:51:33.617] Verified OK [2025-09-24 02:51:33.633] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:51:34.209] Verified OK [2025-09-24 02:51:34.225] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:51:36.928] fs.protected_hardlinks = 1 [2025-09-24 02:51:36.928] fs.protected_symlinks = 1 [2025-09-24 02:51:36.944] kernel.modules_disabled = 1 [2025-09-24 02:51:37.135] [2025-09-24 02:51:37.135] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:51:38.300] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:51:46.120] SBL1:1210.0.1.0 [2025-09-24 02:51:46.151] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:51:47.734] SBL2:1210.0.1.0 [2025-09-24 02:51:47.782] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:51:47.879] j-A [2025-09-24 02:51:55.232] The R5 Autosar Classic is running [2025-09-24 02:51:55.255] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:51:55.255] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:51:55.862] INIT: version 2.96 booting [2025-09-24 02:51:55.974] INIT: Entering runlevel: 5 [2025-09-24 02:51:56.118] mtd32 attached [2025-09-24 02:51:56.134] mtd28 attached [2025-09-24 02:51:56.134] mtd24 attached [2025-09-24 02:51:56.197] RTNETLINK answers: File exists [2025-09-24 02:51:56.197] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:51:56.237] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:51:56.237] ubi1:animations is mounted. [2025-09-24 02:51:56.237] ubi0:dml_code is mounted. [2025-09-24 02:51:56.237] ubi2:textures is mounted. [2025-09-24 02:51:56.237] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:51:56.237] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:51:56.237] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:51:56.237] data.LB_FadeInType0=100 [2025-09-24 02:51:56.258] data.CHLH_FadeInType0=0 [2025-09-24 02:51:56.258] data.WU_FadeInDelay=0 [2025-09-24 02:51:56.258] max_time_out=0 [2025-09-24 02:51:56.258] No splash screen [2025-09-24 02:51:56.258] stop dss Done [2025-09-24 02:51:56.290] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:51:56.327] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:51:56.327] /dev/mem opened. [2025-09-24 02:51:56.327] Memory mapped at address 0xffffa65bc000. [2025-09-24 02:51:56.327] Read at address 0x00600018 (0xffffa65bc018): 0x00000000 [2025-09-24 02:51:56.327] Write at address 0x00600018 (0xffffa65bc018): 0x00400040, readback 0x00400040 [2025-09-24 02:51:56.502] Loaded PowerVR consumer services. [2025-09-24 02:51:56.615] Waiting data available... [2025-09-24 02:51:56.631] 512+0 records in [2025-09-24 02:51:56.631] 512+0 records out [2025-09-24 02:51:56.647] Starting syslogd/klogd: done [2025-09-24 02:51:56.679] DML Start [2025-09-24 02:51:56.806] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:51:57.046] DML res1: 0 [2025-09-24 02:51:57.553] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:51:57.553] Read Success [2025-09-24 02:51:57.553] Verifying certificate... [2025-09-24 02:51:57.793] Verified OK [2025-09-24 02:51:57.809] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:51:59.573] Verified OK [2025-09-24 02:51:59.573] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:52:00.131] Verified OK [2025-09-24 02:52:00.131] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:52:02.609] fs.protected_hardlinks = 1 [2025-09-24 02:52:02.609] fs.protected_symlinks = 1 [2025-09-24 02:52:02.625] kernel.modules_disabled = 1 [2025-09-24 02:52:02.817] [2025-09-24 02:52:02.817] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:52:04.111] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:52:11.920] SBL1:1210.0.1.0 [2025-09-24 02:52:11.952] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:52:13.535] SBL2:1210.0.1.0 [2025-09-24 02:52:13.566] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:52:13.678] j-A [2025-09-24 02:52:21.031] The R5 Autosar Classic is running [2025-09-24 02:52:21.031] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:52:21.053] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:52:21.661] INIT: version 2.96 booting [2025-09-24 02:52:21.772] INIT: Entering runlevel: 5 [2025-09-24 02:52:21.916] mtd24 attached [2025-09-24 02:52:21.932] mtd32 attached [2025-09-24 02:52:21.948] mtd28 attached [2025-09-24 02:52:21.964] ubi0:textures is mounted. [2025-09-24 02:52:21.996] RTNETLINK answers: File exists [2025-09-24 02:52:22.047] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:52:22.047] ubi2:animations is mounted. [2025-09-24 02:52:22.047] ubi1:dml_code is mounted. [2025-09-24 02:52:22.047] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:52:22.047] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:52:22.047] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:52:22.047] data.LB_FadeInType0=100 [2025-09-24 02:52:22.047] data.CHLH_FadeInType0=0 [2025-09-24 02:52:22.047] data.WU_FadeInDelay=0 [2025-09-24 02:52:22.047] max_time_out=0 [2025-09-24 02:52:22.047] No splash screen [2025-09-24 02:52:22.047] stop dss Done [2025-09-24 02:52:22.047] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:52:22.119] /dev/mem opened. [2025-09-24 02:52:22.119] Memory mapped at address 0xffff93fa1000. [2025-09-24 02:52:22.119] Read at address 0x00600018 (0xffff93fa1018): 0x00000000 [2025-09-24 02:52:22.119] Write at address 0x00600018 (0xffff93fa1018): 0x00400040, readback 0x00400040 [2025-09-24 02:52:22.119] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:52:22.135] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:52:22.407] Loaded PowerVR consumer services. [2025-09-24 02:52:22.439] Waiting data available... [2025-09-24 02:52:22.471] 512+0 records in [2025-09-24 02:52:22.471] 512+0 records out [2025-09-24 02:52:22.503] Starting syslogd/klogd: done [2025-09-24 02:52:22.519] DML Start [2025-09-24 02:52:22.695] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:52:22.903] DML res1: 0 [2025-09-24 02:52:23.390] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:52:23.390] Read Success [2025-09-24 02:52:23.390] Verifying certificate... [2025-09-24 02:52:23.614] Verified OK [2025-09-24 02:52:23.646] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:52:25.304] Verified OK [2025-09-24 02:52:25.304] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:52:25.952] Verified OK [2025-09-24 02:52:25.952] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:52:28.494] fs.protected_hardlinks = 1 [2025-09-24 02:52:28.494] fs.protected_symlinks = 1 [2025-09-24 02:52:28.510] kernel.modules_disabled = 1 [2025-09-24 02:52:28.702] [2025-09-24 02:52:28.702] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:52:29.953] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:52:37.715] SBL1:1210.0.1.0 [2025-09-24 02:52:37.763] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:52:39.330] SBL2:1210.0.1.0 [2025-09-24 02:52:39.378] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:52:39.489] j-A [2025-09-24 02:52:46.859] The R5 Autosar Classic is running [2025-09-24 02:52:46.860] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:52:46.860] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:52:47.466] INIT: version 2.96 booting [2025-09-24 02:52:47.578] INIT: Entering runlevel: 5 [2025-09-24 02:52:47.722] mtd24 attached [2025-09-24 02:52:47.738] mtd28 attached [2025-09-24 02:52:47.754] mtd32 attached [2025-09-24 02:52:47.813] ubi0:textures is mounted. [2025-09-24 02:52:47.813] ubi1:animations is mounted. [2025-09-24 02:52:47.813] RTNETLINK answers: File exists [2025-09-24 02:52:47.813] ubi2:dml_code is mounted. [2025-09-24 02:52:47.813] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:52:47.864] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:52:47.864] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:52:47.864] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:52:47.864] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:52:47.864] data.LB_FadeInType0=100 [2025-09-24 02:52:47.864] data.CHLH_FadeInType0=0 [2025-09-24 02:52:47.864] data.WU_FadeInDelay=0 [2025-09-24 02:52:47.864] max_time_out=0 [2025-09-24 02:52:47.864] No splash screen [2025-09-24 02:52:47.864] stop dss Done [2025-09-24 02:52:47.929] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:52:47.963] /dev/mem opened. [2025-09-24 02:52:47.963] Memory mapped at address 0xffffb3a11000. [2025-09-24 02:52:47.963] Read at address 0x00600018 (0xffffb3a11018): 0x00000000 [2025-09-24 02:52:47.963] Write at address 0x00600018 (0xffffb3a11018): 0x00400040, readback 0x00400040 [2025-09-24 02:52:47.963] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:52:48.059] Loaded PowerVR consumer services. [2025-09-24 02:52:48.203] Waiting data available... [2025-09-24 02:52:48.219] 512+0 records in [2025-09-24 02:52:48.219] 512+0 records out [2025-09-24 02:52:48.235] Starting syslogd/klogd: done [2025-09-24 02:52:48.251] DML Start [2025-09-24 02:52:48.442] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:52:48.683] DML res1: 0 [2025-09-24 02:52:49.141] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:52:49.141] Read Success [2025-09-24 02:52:49.141] Verifying certificate... [2025-09-24 02:52:49.365] Verified OK [2025-09-24 02:52:49.381] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:52:51.145] Verified OK [2025-09-24 02:52:51.145] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:52:51.743] Verified OK [2025-09-24 02:52:51.743] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:52:54.252] fs.protected_hardlinks = 1 [2025-09-24 02:52:54.281] fs.protected_symlinks = 1 [2025-09-24 02:52:54.281] kernel.modules_disabled = 1 [2025-09-24 02:52:54.474] [2025-09-24 02:52:54.474] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:52:55.687] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:53:03.520] SBL1:1210.0.1.0 [2025-09-24 02:53:03.552] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:53:05.135] SBL2:1210.0.1.0 [2025-09-24 02:53:05.167] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:53:05.278] j-A [2025-09-24 02:53:12.634] The R5 Autosar Classic is running [2025-09-24 02:53:12.634] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:53:12.655] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:53:13.263] INIT: version 2.96 booting [2025-09-24 02:53:13.375] INIT: Entering runlevel: 5 [2025-09-24 02:53:13.518] mtd28 attached [2025-09-24 02:53:13.534] mtd32 attached [2025-09-24 02:53:13.550] mtd24 attached [2025-09-24 02:53:13.598] ubi0:animations is mounted. [2025-09-24 02:53:13.598] RTNETLINK answers: File exists [2025-09-24 02:53:13.663] ubi1:dml_code is mounted. [2025-09-24 02:53:13.663] ubi2:textures is mounted. [2025-09-24 02:53:13.663] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:53:13.663] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:53:13.663] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:53:13.663] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:53:13.663] data.LB_FadeInType0=100 [2025-09-24 02:53:13.663] data.CHLH_FadeInType0=0 [2025-09-24 02:53:13.663] data.WU_FadeInDelay=0 [2025-09-24 02:53:13.663] max_time_out=0 [2025-09-24 02:53:13.663] No splash screen [2025-09-24 02:53:13.663] stop dss Done [2025-09-24 02:53:13.663] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:53:13.737] /dev/mem opened. [2025-09-24 02:53:13.737] Memory mapped at address 0xffff8064c000. [2025-09-24 02:53:13.737] Read at address 0x00600018 (0xffff8064c018): 0x00000000 [2025-09-24 02:53:13.737] Write at address 0x00600018 (0xffff8064c018): 0x00400040, readback 0x00400040 [2025-09-24 02:53:13.737] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:53:13.752] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:53:13.832] Loaded PowerVR consumer services. [2025-09-24 02:53:14.008] Waiting data available... [2025-09-24 02:53:14.024] 512+0 records in [2025-09-24 02:53:14.024] 512+0 records out [2025-09-24 02:53:14.056] Starting syslogd/klogd: done [2025-09-24 02:53:14.072] DML Start [2025-09-24 02:53:14.264] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:53:14.504] DML res1: 0 [2025-09-24 02:53:14.855] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:53:14.876] Read Success [2025-09-24 02:53:14.876] Verifying certificate... [2025-09-24 02:53:15.132] Verified OK [2025-09-24 02:53:15.148] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:53:16.827] Verified OK [2025-09-24 02:53:16.827] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:53:17.482] Verified OK [2025-09-24 02:53:17.503] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:53:20.076] fs.protected_hardlinks = 1 [2025-09-24 02:53:20.076] fs.protected_symlinks = 1 [2025-09-24 02:53:20.093] kernel.modules_disabled = 1 [2025-09-24 02:53:20.284] [2025-09-24 02:53:20.284] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:53:21.525] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:53:29.296] SBL1:1210.0.1.0 [2025-09-24 02:53:29.344] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:53:30.911] SBL2:1210.0.1.0 [2025-09-24 02:53:30.959] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:53:31.071] j-A [2025-09-24 02:53:38.410] The R5 Autosar Classic is running [2025-09-24 02:53:38.434] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:53:38.434] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:53:39.042] INIT: version 2.96 booting [2025-09-24 02:53:39.154] INIT: Entering runlevel: 5 [2025-09-24 02:53:39.298] mtd28 attached [2025-09-24 02:53:39.314] mtd24 attached [2025-09-24 02:53:39.330] mtd32 attached [2025-09-24 02:53:39.362] ubi0:animations is mounted. [2025-09-24 02:53:39.378] RTNETLINK answers: File exists [2025-09-24 02:53:39.378] ubi1:textures is mounted. [2025-09-24 02:53:39.438] ubi2:dml_code is mounted. [2025-09-24 02:53:39.438] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:53:39.438] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:53:39.438] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:53:39.438] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:53:39.438] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:53:39.438] data.LB_FadeInType0=100 [2025-09-24 02:53:39.438] data.CHLH_FadeInType0=0 [2025-09-24 02:53:39.438] data.WU_FadeInDelay=0 [2025-09-24 02:53:39.438] max_time_out=0 [2025-09-24 02:53:39.438] No splash screen [2025-09-24 02:53:39.438] stop dss Done [2025-09-24 02:53:39.477] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:53:39.477] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:53:39.511] /dev/mem opened. [2025-09-24 02:53:39.511] Memory mapped at address 0xffff9c15c000. [2025-09-24 02:53:39.511] Read at address 0x00600018 (0xffff9c15c018): 0x00000000 [2025-09-24 02:53:39.511] Write at address 0x00600018 (0xffff9c15c018): 0x00400040, readback 0x00400040 [2025-09-24 02:53:39.720] Loaded PowerVR consumer services. [2025-09-24 02:53:39.799] Waiting data available... [2025-09-24 02:53:39.854] 512+0 records in [2025-09-24 02:53:39.854] 512+0 records out [2025-09-24 02:53:39.854] _rpmsg_char_find_rproc: 78000000.r5f device is mostly yet to be created! [2025-09-24 02:53:39.854] rpmsg_char_open: _rpmsg_char_find_rproc failed [2025-09-24 02:53:39.854] Ipc_InitDriver: rpmsg_char_open failed, retrying... [2025-09-24 02:53:39.854] Starting syslogd/klogd: done [2025-09-24 02:53:39.870] DML Start [2025-09-24 02:53:40.047] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:53:40.222] DML res1: 0 [2025-09-24 02:53:40.710] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:53:40.710] Read Success [2025-09-24 02:53:40.710] Verifying certificate... [2025-09-24 02:53:40.933] Verified OK [2025-09-24 02:53:40.949] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:53:42.639] Verified OK [2025-09-24 02:53:42.639] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:53:43.199] Verified OK [2025-09-24 02:53:43.199] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:53:45.772] fs.protected_hardlinks = 1 [2025-09-24 02:53:45.788] fs.protected_symlinks = 1 [2025-09-24 02:53:45.805] kernel.modules_disabled = 1 [2025-09-24 02:53:45.996] [2025-09-24 02:53:45.996] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:53:47.301] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:53:55.094] SBL1:1210.0.1.0 [2025-09-24 02:53:55.142] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:53:56.708] SBL2:1210.0.1.0 [2025-09-24 02:53:56.756] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:53:56.852] j-A [2025-09-24 02:54:04.208] The R5 Autosar Classic is running [2025-09-24 02:54:04.230] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:54:04.230] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:54:04.837] INIT: version 2.96 booting [2025-09-24 02:54:04.950] INIT: Entering runlevel: 5 [2025-09-24 02:54:05.109] mtd28 attached [2025-09-24 02:54:05.125] mtd24 attached [2025-09-24 02:54:05.141] mtd32 attached [2025-09-24 02:54:05.238] RTNETLINK answers: File exists [2025-09-24 02:54:05.238] ubi0:animations is mounted. [2025-09-24 02:54:05.238] ubi1:textures is mounted. [2025-09-24 02:54:05.238] ubi2:dml_code is mounted. [2025-09-24 02:54:05.238] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:54:05.238] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:54:05.238] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:54:05.238] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:54:05.238] data.LB_FadeInType0=100 [2025-09-24 02:54:05.238] data.CHLH_FadeInType0=0 [2025-09-24 02:54:05.238] data.WU_FadeInDelay=0 [2025-09-24 02:54:05.238] max_time_out=0 [2025-09-24 02:54:05.238] No splash screen [2025-09-24 02:54:05.238] stop dss Done [2025-09-24 02:54:05.238] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:54:05.270] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:54:05.313] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:54:05.313] /dev/mem opened. [2025-09-24 02:54:05.313] Memory mapped at address 0xffffb18bc000. [2025-09-24 02:54:05.313] Read at address 0x00600018 (0xffffb18bc018): 0x00000000 [2025-09-24 02:54:05.313] Write at address 0x00600018 (0xffffb18bc018): 0x00400040, readback 0x00400040 [2025-09-24 02:54:05.537] Loaded PowerVR consumer services. [2025-09-24 02:54:05.584] Waiting data available... [2025-09-24 02:54:05.616] 512+0 records in [2025-09-24 02:54:05.616] 512+0 records out [2025-09-24 02:54:05.632] Starting syslogd/klogd: done [2025-09-24 02:54:05.664] DML Start [2025-09-24 02:54:05.840] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:54:06.064] DML res1: 0 [2025-09-24 02:54:06.479] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:54:06.500] Read Success [2025-09-24 02:54:06.500] Verifying certificate... [2025-09-24 02:54:06.725] Verified OK [2025-09-24 02:54:06.741] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:54:08.286] Verified OK [2025-09-24 02:54:08.286] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:54:08.909] Verified OK [2025-09-24 02:54:08.909] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:54:11.691] fs.protected_hardlinks = 1 [2025-09-24 02:54:11.707] fs.protected_symlinks = 1 [2025-09-24 02:54:11.707] kernel.modules_disabled = 1 [2025-09-24 02:54:11.915] [2025-09-24 02:54:11.915] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:54:13.098] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:54:20.897] SBL1:1210.0.1.0 [2025-09-24 02:54:20.945] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:54:22.512] SBL2:1210.0.1.0 [2025-09-24 02:54:22.559] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:54:22.671] j-A [2025-09-24 02:54:30.012] The R5 Autosar Classic is running [2025-09-24 02:54:30.037] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:54:30.037] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:54:30.644] INIT: version 2.96 booting [2025-09-24 02:54:30.755] INIT: Entering runlevel: 5 [2025-09-24 02:54:30.916] mtd28 attached [2025-09-24 02:54:30.932] mtd24 attached [2025-09-24 02:54:30.932] mtd32 attached [2025-09-24 02:54:30.964] ubi0:animations is mounted. [2025-09-24 02:54:31.037] ubi1:textures is mounted. [2025-09-24 02:54:31.037] RTNETLINK answers: File exists [2025-09-24 02:54:31.037] ubi2:dml_code is mounted. [2025-09-24 02:54:31.037] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:54:31.037] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:54:31.037] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:54:31.037] data.LB_FadeInType0=100 [2025-09-24 02:54:31.037] data.CHLH_FadeInType0=0 [2025-09-24 02:54:31.037] data.WU_FadeInDelay=0 [2025-09-24 02:54:31.037] max_time_out=0 [2025-09-24 02:54:31.037] No splash screen [2025-09-24 02:54:31.037] stop dss Done [2025-09-24 02:54:31.037] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:54:31.053] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:54:31.111] /dev/mem opened. [2025-09-24 02:54:31.111] Memory mapped at address 0xffffb50e6000. [2025-09-24 02:54:31.111] Read at address 0x00600018 (0xffffb50e6018): 0x00000000 [2025-09-24 02:54:31.111] Write at address 0x00600018 (0xffffb50e6018): 0x00400040, readback 0x00400040 [2025-09-24 02:54:31.143] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:54:31.160] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:54:31.287] Loaded PowerVR consumer services. [2025-09-24 02:54:31.400] Waiting data available... [2025-09-24 02:54:31.432] 512+0 records in [2025-09-24 02:54:31.432] 512+0 records out [2025-09-24 02:54:31.447] Starting syslogd/klogd: done [2025-09-24 02:54:31.463] DML Start [2025-09-24 02:54:31.623] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:54:31.815] DML res1: 0 [2025-09-24 02:54:32.323] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:54:32.323] Read Success [2025-09-24 02:54:32.323] Verifying certificate... [2025-09-24 02:54:32.595] Verified OK [2025-09-24 02:54:32.627] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:54:34.082] Verified OK [2025-09-24 02:54:34.082] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:54:34.753] Verified OK [2025-09-24 02:54:34.753] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:54:37.422] fs.protected_hardlinks = 1 [2025-09-24 02:54:37.422] fs.protected_symlinks = 1 [2025-09-24 02:54:37.422] kernel.modules_disabled = 1 [2025-09-24 02:54:37.597] [2025-09-24 02:54:37.597] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:54:38.917] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:54:46.728] SBL1:1210.0.1.0 [2025-09-24 02:54:46.760] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:54:48.342] SBL2:1210.0.1.0 [2025-09-24 02:54:48.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:54:48.486] j-A [2025-09-24 02:54:55.861] The R5 Autosar Classic is running [2025-09-24 02:54:55.861] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:54:55.861] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:54:56.469] INIT: version 2.96 booting [2025-09-24 02:54:56.580] INIT: Entering runlevel: 5 [2025-09-24 02:54:56.725] mtd24 attached [2025-09-24 02:54:56.741] mtd28 attached [2025-09-24 02:54:56.757] mtd32 attached [2025-09-24 02:54:56.805] ubi0:textures is mounted. [2025-09-24 02:54:56.805] RTNETLINK answers: File exists [2025-09-24 02:54:56.845] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:54:56.845] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:54:56.845] ubi1:animations is mounted. [2025-09-24 02:54:56.845] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:54:56.845] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:54:56.845] ubi2:dml_code is mounted. [2025-09-24 02:54:56.845] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:54:56.861] data.LB_FadeInType0=100 [2025-09-24 02:54:56.861] data.CHLH_FadeInType0=0 [2025-09-24 02:54:56.896] data.WU_FadeInDelay=0 [2025-09-24 02:54:56.896] max_time_out=0 [2025-09-24 02:54:56.896] No splash screen [2025-09-24 02:54:56.896] stop dss Done [2025-09-24 02:54:56.896] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:54:56.896] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:54:56.928] /dev/mem opened. [2025-09-24 02:54:56.928] Memory mapped at address 0xffff86ee5000. [2025-09-24 02:54:56.954] Read at address 0x00600018 (0xffff86ee5018): 0x00000000 [2025-09-24 02:54:56.954] Write at address 0x00600018 (0xffff86ee5018): 0x00400040, readback 0x00400040 [2025-09-24 02:54:57.066] Loaded PowerVR consumer services. [2025-09-24 02:54:57.210] Waiting data available... [2025-09-24 02:54:57.226] 512+0 records in [2025-09-24 02:54:57.226] 512+0 records out [2025-09-24 02:54:57.242] Starting syslogd/klogd: done [2025-09-24 02:54:57.274] DML Start [2025-09-24 02:54:57.482] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:54:57.690] DML res1: 0 [2025-09-24 02:54:58.131] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:54:58.131] Read Success [2025-09-24 02:54:58.131] Verifying certificate... [2025-09-24 02:54:58.371] Verified OK [2025-09-24 02:54:58.387] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:55:00.075] Verified OK [2025-09-24 02:55:00.075] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:55:00.650] Verified OK [2025-09-24 02:55:00.650] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:55:03.321] fs.protected_hardlinks = 1 [2025-09-24 02:55:03.337] fs.protected_symlinks = 1 [2025-09-24 02:55:03.337] kernel.modules_disabled = 1 [2025-09-24 02:55:03.545] [2025-09-24 02:55:03.545] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:55:04.786] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:55:12.557] SBL1:1210.0.1.0 [2025-09-24 02:55:12.605] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:55:14.171] SBL2:1210.0.1.0 [2025-09-24 02:55:14.220] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:55:14.332] j-A [2025-09-24 02:55:21.669] The R5 Autosar Classic is running [2025-09-24 02:55:21.700] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:55:21.700] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:55:22.308] INIT: version 2.96 booting [2025-09-24 02:55:22.420] INIT: Entering runlevel: 5 [2025-09-24 02:55:22.579] mtd32 attached [2025-09-24 02:55:22.595] mtd24 attached [2025-09-24 02:55:22.595] mtd28 attached [2025-09-24 02:55:22.643] ubi0:dml_code is mounted. [2025-09-24 02:55:22.643] RTNETLINK answers: File exists [2025-09-24 02:55:22.660] ubi1:textures is mounted. [2025-09-24 02:55:22.660] ubi2:animations is mounted. [2025-09-24 02:55:22.709] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:55:22.709] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:55:22.709] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:55:22.709] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:55:22.709] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:55:22.709] data.LB_FadeInType0=100 [2025-09-24 02:55:22.709] data.CHLH_FadeInType0=0 [2025-09-24 02:55:22.709] data.WU_FadeInDelay=0 [2025-09-24 02:55:22.709] max_time_out=0 [2025-09-24 02:55:22.709] No splash screen [2025-09-24 02:55:22.709] stop dss Done [2025-09-24 02:55:22.790] /dev/mem opened. [2025-09-24 02:55:22.790] Memory mapped at address 0xffff9b2d6000. [2025-09-24 02:55:22.790] Read at address 0x00600018 (0xffff9b2d6018): 0x00000000 [2025-09-24 02:55:22.790] Write at address 0x00600018 (0xffff9b2d6018): 0x00400040, readback 0x00400040 [2025-09-24 02:55:22.790] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:55:22.806] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:55:22.918] Loaded PowerVR consumer services. [2025-09-24 02:55:23.046] Waiting data available... [2025-09-24 02:55:23.062] 512+0 records in [2025-09-24 02:55:23.062] 512+0 records out [2025-09-24 02:55:23.110] Starting syslogd/klogd: done [2025-09-24 02:55:23.126] DML Start [2025-09-24 02:55:23.302] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:55:23.526] DML res1: 0 [2025-09-24 02:55:23.936] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:55:23.936] Read Success [2025-09-24 02:55:23.936] Verifying certificate... [2025-09-24 02:55:24.177] Verified OK [2025-09-24 02:55:24.193] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:55:25.807] Verified OK [2025-09-24 02:55:25.823] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:55:26.455] Verified OK [2025-09-24 02:55:26.455] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:55:29.190] fs.protected_hardlinks = 1 [2025-09-24 02:55:29.206] fs.protected_symlinks = 1 [2025-09-24 02:55:29.206] kernel.modules_disabled = 1 [2025-09-24 02:55:29.414] [2025-09-24 02:55:29.414] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:55:30.529] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:55:38.385] SBL1:1210.0.1.0 [2025-09-24 02:55:38.433] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:55:39.999] SBL2:1210.0.1.0 [2025-09-24 02:55:40.047] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:55:40.143] j-A [2025-09-24 02:55:47.497] The R5 Autosar Classic is running [2025-09-24 02:55:47.522] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:55:47.522] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:55:48.129] INIT: version 2.96 booting [2025-09-24 02:55:48.241] INIT: Entering runlevel: 5 [2025-09-24 02:55:48.400] mtd28 attached [2025-09-24 02:55:48.416] mtd24 attached [2025-09-24 02:55:48.432] ubi0:animations is mounted. [2025-09-24 02:55:48.432] mtd32 attached [2025-09-24 02:55:48.465] ubi1:textures is mounted. [2025-09-24 02:55:48.501] RTNETLINK answers: File exists [2025-09-24 02:55:48.501] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:55:48.501] ubi2:dml_code is mounted. [2025-09-24 02:55:48.501] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:55:48.501] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:55:48.541] data.LB_FadeInType0=100 [2025-09-24 02:55:48.541] data.CHLH_FadeInType0=0 [2025-09-24 02:55:48.541] data.WU_FadeInDelay=0 [2025-09-24 02:55:48.541] max_time_out=0 [2025-09-24 02:55:48.541] No splash screen [2025-09-24 02:55:48.541] stop dss Done [2025-09-24 02:55:48.541] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:55:48.541] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:55:48.572] /dev/mem opened. [2025-09-24 02:55:48.572] Memory mapped at address 0xffff8777b000. [2025-09-24 02:55:48.598] Read at address 0x00600018 (0xffff8777b018): 0x00000000 [2025-09-24 02:55:48.598] Write at address 0x00600018 (0xffff8777b018): 0x00400040, readback 0x00400040 [2025-09-24 02:55:48.646] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:55:48.662] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:55:48.883] Waiting data available... [2025-09-24 02:55:48.883] Loaded PowerVR consumer services. [2025-09-24 02:55:48.915] 512+0 records in [2025-09-24 02:55:48.915] 512+0 records out [2025-09-24 02:55:48.947] Starting syslogd/klogd: done [2025-09-24 02:55:48.963] DML Start [2025-09-24 02:55:49.155] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:55:49.378] DML res1: 0 [2025-09-24 02:55:49.794] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:55:49.815] Read Success [2025-09-24 02:55:49.815] Verifying certificate... [2025-09-24 02:55:50.039] Verified OK [2025-09-24 02:55:50.071] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:55:51.695] Verified OK [2025-09-24 02:55:51.695] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:55:52.333] Verified OK [2025-09-24 02:55:52.333] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:55:54.876] fs.protected_hardlinks = 1 [2025-09-24 02:55:54.876] fs.protected_symlinks = 1 [2025-09-24 02:55:54.892] kernel.modules_disabled = 1 [2025-09-24 02:55:55.084] [2025-09-24 02:55:55.084] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:55:56.384] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:56:04.201] SBL1:1210.0.1.0 [2025-09-24 02:56:04.233] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:56:05.816] SBL2:1210.0.1.0 [2025-09-24 02:56:05.847] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 02:56:05.960] j-A [2025-09-24 02:56:13.334] The R5 Autosar Classic is running [2025-09-24 02:56:13.334] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:56:13.334] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:56:13.941] INIT: version 2.96 booting [2025-09-24 02:56:14.052] INIT: Entering runlevel: 5 [2025-09-24 02:56:14.197] mtd32 attached [2025-09-24 02:56:14.213] mtd24 attached [2025-09-24 02:56:14.213] mtd28 attached [2025-09-24 02:56:14.308] RTNETLINK answers: File exists [2025-09-24 02:56:14.308] ubi0:dml_code is mounted. [2025-09-24 02:56:14.308] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:56:14.308] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:56:14.308] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:56:14.308] ubi1:textures is mounted. [2025-09-24 02:56:14.308] ubi2:animations is mounted. [2025-09-24 02:56:14.308] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:56:14.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:56:14.336] data.LB_FadeInType0=100 [2025-09-24 02:56:14.336] data.CHLH_FadeInType0=0 [2025-09-24 02:56:14.336] data.WU_FadeInDelay=0 [2025-09-24 02:56:14.336] max_time_out=0 [2025-09-24 02:56:14.336] No splash screen [2025-09-24 02:56:14.336] stop dss Done [2025-09-24 02:56:14.384] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:56:14.423] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:56:14.423] /dev/mem opened. [2025-09-24 02:56:14.423] Memory mapped at address 0xffff9a03a000. [2025-09-24 02:56:14.423] Read at address 0x00600018 (0xffff9a03a018): 0x00000000 [2025-09-24 02:56:14.423] Write at address 0x00600018 (0xffff9a03a018): 0x00400040, readback 0x00400040 [2025-09-24 02:56:14.503] Loaded PowerVR consumer services. [2025-09-24 02:56:14.694] Waiting data available... [2025-09-24 02:56:14.694] 512+0 records in [2025-09-24 02:56:14.694] 512+0 records out [2025-09-24 02:56:14.726] Starting syslogd/klogd: done [2025-09-24 02:56:14.742] DML Start [2025-09-24 02:56:14.917] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:56:15.157] DML res1: 0 [2025-09-24 02:56:15.557] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:56:15.582] Read Success [2025-09-24 02:56:15.582] Verifying certificate... [2025-09-24 02:56:15.853] Verified OK [2025-09-24 02:56:15.869] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:56:17.532] Verified OK [2025-09-24 02:56:17.548] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:56:18.107] Verified OK [2025-09-24 02:56:18.107] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:56:20.697] fs.protected_hardlinks = 1 [2025-09-24 02:56:20.697] fs.protected_symlinks = 1 [2025-09-24 02:56:20.713] kernel.modules_disabled = 1 [2025-09-24 02:56:20.905] [2025-09-24 02:56:20.905] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:56:22.181] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:56:30.016] SBL1:1210.0.1.0 [2025-09-24 02:56:30.064] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:56:31.630] SBL2:1210.0.1.0 [2025-09-24 02:56:31.678] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:56:31.775] j-A [2025-09-24 02:56:39.128] The R5 Autosar Classic is running [2025-09-24 02:56:39.153] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:56:39.153] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:56:39.761] INIT: version 2.96 booting [2025-09-24 02:56:39.872] INIT: Entering runlevel: 5 [2025-09-24 02:56:40.033] mtd24 attached [2025-09-24 02:56:40.048] mtd28 attached [2025-09-24 02:56:40.080] ubi0:textures is mounted. [2025-09-24 02:56:40.080] mtd32 attached [2025-09-24 02:56:40.096] ubi1:animations is mounted. [2025-09-24 02:56:40.112] RTNETLINK answers: File exists [2025-09-24 02:56:40.166] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:56:40.166] ubi2:dml_code is mounted. [2025-09-24 02:56:40.166] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:56:40.166] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:56:40.166] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:56:40.166] data.LB_FadeInType0=100 [2025-09-24 02:56:40.166] data.CHLH_FadeInType0=0 [2025-09-24 02:56:40.166] data.WU_FadeInDelay=0 [2025-09-24 02:56:40.166] max_time_out=0 [2025-09-24 02:56:40.166] No splash screen [2025-09-24 02:56:40.166] stop dss Done [2025-09-24 02:56:40.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:56:40.238] /dev/mem opened. [2025-09-24 02:56:40.238] Memory mapped at address 0xffff9d879000. [2025-09-24 02:56:40.238] Read at address 0x00600018 (0xffff9d879018): 0x00000000 [2025-09-24 02:56:40.238] Write at address 0x00600018 (0xffff9d879018): 0x00400040, readback 0x00400040 [2025-09-24 02:56:40.286] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:56:40.286] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:56:40.493] Loaded PowerVR consumer services. [2025-09-24 02:56:40.509] Waiting data available... [2025-09-24 02:56:40.525] 512+0 records in [2025-09-24 02:56:40.541] 512+0 records out [2025-09-24 02:56:40.573] Starting syslogd/klogd: done [2025-09-24 02:56:40.589] DML Start [2025-09-24 02:56:40.781] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:56:41.005] DML res1: 0 [2025-09-24 02:56:41.436] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:56:41.461] Read Success [2025-09-24 02:56:41.461] Verifying certificate... [2025-09-24 02:56:41.733] Verified OK [2025-09-24 02:56:41.765] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:56:43.500] Verified OK [2025-09-24 02:56:43.500] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:56:44.075] Verified OK [2025-09-24 02:56:44.075] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:56:46.554] fs.protected_hardlinks = 1 [2025-09-24 02:56:46.570] fs.protected_symlinks = 1 [2025-09-24 02:56:46.570] kernel.modules_disabled = 1 [2025-09-24 02:56:46.762] [2025-09-24 02:56:46.762] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:56:48.023] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:56:55.822] SBL1:1210.0.1.0 [2025-09-24 02:56:55.870] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:56:57.437] SBL2:1210.0.1.0 [2025-09-24 02:56:57.485] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:56:57.596] j-A [2025-09-24 02:57:04.935] The R5 Autosar Classic is running [2025-09-24 02:57:04.961] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:57:04.961] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:57:05.568] INIT: version 2.96 booting [2025-09-24 02:57:05.679] INIT: Entering runlevel: 5 [2025-09-24 02:57:05.840] mtd24 attached [2025-09-24 02:57:05.840] mtd28 attached [2025-09-24 02:57:05.855] mtd32 attached [2025-09-24 02:57:05.903] ubi0:textures is mounted. [2025-09-24 02:57:05.947] RTNETLINK answers: File exists [2025-09-24 02:57:05.947] ubi2:dml_code is mounted. [2025-09-24 02:57:05.947] ubi1:animations is mounted. [2025-09-24 02:57:05.947] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:57:05.947] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:57:05.947] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:57:05.947] data.LB_FadeInType0=100 [2025-09-24 02:57:05.947] data.CHLH_FadeInType0=0 [2025-09-24 02:57:05.973] data.WU_FadeInDelay=0 [2025-09-24 02:57:05.973] max_time_out=0 [2025-09-24 02:57:05.973] No splash screen [2025-09-24 02:57:05.973] stop dss Done [2025-09-24 02:57:05.973] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:57:05.973] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:57:06.047] /dev/mem opened. [2025-09-24 02:57:06.047] Memory mapped at address 0xffff99b10000. [2025-09-24 02:57:06.047] Read at address 0x00600018 (0xffff99b10018): 0x00000000 [2025-09-24 02:57:06.047] Write at address 0x00600018 (0xffff99b10018): 0x00400040, readback 0x00400040 [2025-09-24 02:57:06.047] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:57:06.063] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:57:06.222] Loaded PowerVR consumer services. [2025-09-24 02:57:06.334] Waiting data available... [2025-09-24 02:57:06.350] 512+0 records in [2025-09-24 02:57:06.350] 512+0 records out [2025-09-24 02:57:06.398] Starting syslogd/klogd: done [2025-09-24 02:57:06.414] DML Start [2025-09-24 02:57:06.622] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:57:06.830] DML res1: 0 [2025-09-24 02:57:07.254] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:57:07.254] Read Success [2025-09-24 02:57:07.254] Verifying certificate... [2025-09-24 02:57:07.542] Verified OK [2025-09-24 02:57:07.558] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:57:09.276] Verified OK [2025-09-24 02:57:09.276] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:57:09.842] Verified OK [2025-09-24 02:57:09.842] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:57:12.352] fs.protected_hardlinks = 1 [2025-09-24 02:57:12.352] fs.protected_symlinks = 1 [2025-09-24 02:57:12.368] kernel.modules_disabled = 1 [2025-09-24 02:57:12.559] [2025-09-24 02:57:12.559] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:57:13.834] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:57:21.619] SBL1:1210.0.1.0 [2025-09-24 02:57:21.667] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:57:23.250] SBL2:1210.0.1.0 [2025-09-24 02:57:23.282] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:57:23.394] j-A [2025-09-24 02:57:30.767] The R5 Autosar Classic is running [2025-09-24 02:57:30.767] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:57:30.767] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:57:31.374] INIT: version 2.96 booting [2025-09-24 02:57:31.486] INIT: Entering runlevel: 5 [2025-09-24 02:57:31.630] mtd24 attached [2025-09-24 02:57:31.646] mtd28 attached [2025-09-24 02:57:31.662] mtd32 attached [2025-09-24 02:57:31.678] ubi0:textures is mounted. [2025-09-24 02:57:31.709] ubi1:animations is mounted. [2025-09-24 02:57:31.767] RTNETLINK answers: File exists [2025-09-24 02:57:31.767] ubi2:dml_code is mounted. [2025-09-24 02:57:31.767] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:57:31.767] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:57:31.767] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:57:31.767] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:57:31.767] data.LB_FadeInType0=100 [2025-09-24 02:57:31.767] data.CHLH_FadeInType0=0 [2025-09-24 02:57:31.767] data.WU_FadeInDelay=0 [2025-09-24 02:57:31.767] max_time_out=0 [2025-09-24 02:57:31.767] No splash screen [2025-09-24 02:57:31.767] stop dss Done [2025-09-24 02:57:31.767] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:57:31.815] /dev/mem opened. [2025-09-24 02:57:31.815] Memory mapped at address 0xffffa8641000. [2025-09-24 02:57:31.854] Read at address 0x00600018 (0xffffa8641018): 0x00000000 [2025-09-24 02:57:31.854] Write at address 0x00600018 (0xffffa8641018): 0x00400040, readback 0x00400040 [2025-09-24 02:57:31.854] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:57:31.854] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:57:32.077] Loaded PowerVR consumer services. [2025-09-24 02:57:32.142] Waiting data available... [2025-09-24 02:57:32.174] 512+0 records in [2025-09-24 02:57:32.174] 512+0 records out [2025-09-24 02:57:32.206] Starting syslogd/klogd: done [2025-09-24 02:57:32.222] DML Start [2025-09-24 02:57:32.429] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:57:32.637] DML res1: 0 [2025-09-24 02:57:33.035] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:57:33.035] Read Success [2025-09-24 02:57:33.035] Verifying certificate... [2025-09-24 02:57:33.242] Verified OK [2025-09-24 02:57:33.259] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:57:34.871] Verified OK [2025-09-24 02:57:34.871] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:57:35.527] Verified OK [2025-09-24 02:57:35.527] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:57:38.181] fs.protected_hardlinks = 1 [2025-09-24 02:57:38.197] fs.protected_symlinks = 1 [2025-09-24 02:57:38.197] kernel.modules_disabled = 1 [2025-09-24 02:57:38.389] [2025-09-24 02:57:38.389] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:57:39.626] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:57:47.423] SBL1:1210.0.1.0 [2025-09-24 02:57:47.471] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:57:49.037] SBL2:1210.0.1.0 [2025-09-24 02:57:49.086] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:57:49.198] j-A [2025-09-24 02:57:56.538] The R5 Autosar Classic is running [2025-09-24 02:57:56.569] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:57:56.569] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:57:57.176] INIT: version 2.96 booting [2025-09-24 02:57:57.288] INIT: Entering runlevel: 5 [2025-09-24 02:57:57.431] mtd28 attached [2025-09-24 02:57:57.447] mtd24 attached [2025-09-24 02:57:57.464] mtd32 attached [2025-09-24 02:57:57.496] ubi0:animations is mounted. [2025-09-24 02:57:57.512] ubi1:textures is mounted. [2025-09-24 02:57:57.512] RTNETLINK answers: File exists [2025-09-24 02:57:57.541] ubi2:dml_code is mounted. [2025-09-24 02:57:57.541] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:57:57.541] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:57:57.575] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:57:57.575] data.LB_FadeInType0=100 [2025-09-24 02:57:57.575] data.CHLH_FadeInType0=0 [2025-09-24 02:57:57.575] data.WU_FadeInDelay=0 [2025-09-24 02:57:57.575] max_time_out=0 [2025-09-24 02:57:57.575] No splash screen [2025-09-24 02:57:57.575] stop dss Done [2025-09-24 02:57:57.575] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:57:57.575] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:57:57.629] /dev/mem opened. [2025-09-24 02:57:57.629] Memory mapped at address 0xffffa989f000. [2025-09-24 02:57:57.629] Read at address 0x00600018 (0xffffa989f018): 0x00000000 [2025-09-24 02:57:57.629] Write at address 0x00600018 (0xffffa989f018): 0x00400040, readback 0x00400040 [2025-09-24 02:57:57.667] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:57:57.667] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:57:57.747] Loaded PowerVR consumer services. [2025-09-24 02:57:57.908] Waiting data available... [2025-09-24 02:57:57.939] 512+0 records in [2025-09-24 02:57:57.939] 512+0 records out [2025-09-24 02:57:57.987] Starting syslogd/klogd: done [2025-09-24 02:57:58.003] DML Start [2025-09-24 02:57:58.147] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:57:58.339] DML res1: 0 [2025-09-24 02:57:58.843] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:57:58.843] Read Success [2025-09-24 02:57:58.843] Verifying certificate... [2025-09-24 02:57:59.083] Verified OK [2025-09-24 02:57:59.115] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:58:00.794] Verified OK [2025-09-24 02:58:00.794] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:58:01.278] Verified OK [2025-09-24 02:58:01.278] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:58:03.771] fs.protected_hardlinks = 1 [2025-09-24 02:58:03.771] fs.protected_symlinks = 1 [2025-09-24 02:58:03.787] kernel.modules_disabled = 1 [2025-09-24 02:58:03.980] [2025-09-24 02:58:03.980] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:58:05.428] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:58:13.232] SBL1:1210.0.1.0 [2025-09-24 02:58:13.280] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:58:14.847] SBL2:1210.0.1.0 [2025-09-24 02:58:14.894] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:58:15.006] j-A [2025-09-24 02:58:22.347] The R5 Autosar Classic is running [2025-09-24 02:58:22.372] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:58:22.372] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:58:22.979] INIT: version 2.96 booting [2025-09-24 02:58:23.091] INIT: Entering runlevel: 5 [2025-09-24 02:58:23.251] mtd24 attached [2025-09-24 02:58:23.267] mtd32 attached [2025-09-24 02:58:23.267] mtd28 attached [2025-09-24 02:58:23.283] ubi0:textures is mounted. [2025-09-24 02:58:23.315] RTNETLINK answers: File exists [2025-09-24 02:58:23.380] ubi2:animations is mounted. [2025-09-24 02:58:23.380] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:58:23.380] ubi1:dml_code is mounted. [2025-09-24 02:58:23.380] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:58:23.380] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:58:23.380] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:58:23.380] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:58:23.380] data.LB_FadeInType0=100 [2025-09-24 02:58:23.380] data.CHLH_FadeInType0=0 [2025-09-24 02:58:23.380] data.WU_FadeInDelay=0 [2025-09-24 02:58:23.380] max_time_out=0 [2025-09-24 02:58:23.380] No splash screen [2025-09-24 02:58:23.380] stop dss Done [2025-09-24 02:58:23.412] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:58:23.428] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:58:23.464] /dev/mem opened. [2025-09-24 02:58:23.464] Memory mapped at address 0xffffb3340000. [2025-09-24 02:58:23.464] Read at address 0x00600018 (0xffffb3340018): 0x00000000 [2025-09-24 02:58:23.464] Write at address 0x00600018 (0xffffb3340018): 0x00400040, readback 0x00400040 [2025-09-24 02:58:23.576] Loaded PowerVR consumer services. [2025-09-24 02:58:23.719] Waiting data available... [2025-09-24 02:58:23.719] 512+0 records in [2025-09-24 02:58:23.735] 512+0 records out [2025-09-24 02:58:23.751] Starting syslogd/klogd: done [2025-09-24 02:58:23.783] DML Start [2025-09-24 02:58:23.944] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:58:24.216] DML res1: 0 [2025-09-24 02:58:24.644] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:58:24.644] Read Success [2025-09-24 02:58:24.644] Verifying certificate... [2025-09-24 02:58:24.868] Verified OK [2025-09-24 02:58:24.884] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:58:26.643] Verified OK [2025-09-24 02:58:26.643] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:58:27.186] Verified OK [2025-09-24 02:58:27.207] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:58:29.845] fs.protected_hardlinks = 1 [2025-09-24 02:58:29.845] fs.protected_symlinks = 1 [2025-09-24 02:58:29.861] kernel.modules_disabled = 1 [2025-09-24 02:58:30.037] [2025-09-24 02:58:30.037] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:58:31.244] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:58:39.042] SBL1:1210.0.1.0 [2025-09-24 02:58:39.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:58:40.657] SBL2:1210.0.1.0 [2025-09-24 02:58:40.705] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:58:40.817] j-A [2025-09-24 02:58:48.156] The R5 Autosar Classic is running [2025-09-24 02:58:48.181] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:58:48.181] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:58:48.789] INIT: version 2.96 booting [2025-09-24 02:58:48.901] INIT: Entering runlevel: 5 [2025-09-24 02:58:49.061] mtd28 attached [2025-09-24 02:58:49.077] mtd32 attached [2025-09-24 02:58:49.077] mtd24 attached [2025-09-24 02:58:49.125] ubi0:animations is mounted. [2025-09-24 02:58:49.125] RTNETLINK answers: File exists [2025-09-24 02:58:49.164] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:58:49.164] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:58:49.164] ubi1:dml_code is mounted. [2025-09-24 02:58:49.164] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:58:49.164] ubi2:textures is mounted. [2025-09-24 02:58:49.164] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:58:49.164] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:58:49.191] data.LB_FadeInType0=100 [2025-09-24 02:58:49.191] data.CHLH_FadeInType0=0 [2025-09-24 02:58:49.191] data.WU_FadeInDelay=0 [2025-09-24 02:58:49.191] max_time_out=0 [2025-09-24 02:58:49.191] No splash screen [2025-09-24 02:58:49.191] stop dss Done [2025-09-24 02:58:49.236] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:58:49.236] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:58:49.236] /dev/mem opened. [2025-09-24 02:58:49.236] Memory mapped at address 0xffffb5335000. [2025-09-24 02:58:49.263] Read at address 0x00600018 (0xffffb5335018): 0x00000000 [2025-09-24 02:58:49.263] Write at address 0x00600018 (0xffffb5335018): 0x00400040, readback 0x00400040 [2025-09-24 02:58:49.391] Loaded PowerVR consumer services. [2025-09-24 02:58:49.535] Waiting data available... [2025-09-24 02:58:49.567] 512+0 records in [2025-09-24 02:58:49.567] 512+0 records out [2025-09-24 02:58:49.599] Starting syslogd/klogd: done [2025-09-24 02:58:49.615] DML Start [2025-09-24 02:58:49.791] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:58:50.062] DML res1: 0 [2025-09-24 02:58:50.430] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:58:50.430] Read Success [2025-09-24 02:58:50.430] Verifying certificate... [2025-09-24 02:58:50.701] Verified OK [2025-09-24 02:58:50.733] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:58:52.301] Verified OK [2025-09-24 02:58:52.301] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:58:52.954] Verified OK [2025-09-24 02:58:52.954] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:58:55.591] fs.protected_hardlinks = 1 [2025-09-24 02:58:55.591] fs.protected_symlinks = 1 [2025-09-24 02:58:55.591] kernel.modules_disabled = 1 [2025-09-24 02:58:55.766] [2025-09-24 02:58:55.766] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:58:57.068] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:59:04.855] SBL1:1210.0.1.0 [2025-09-24 02:59:04.903] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:59:06.469] SBL2:1210.0.1.0 [2025-09-24 02:59:06.517] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:59:06.613] j-A [2025-09-24 02:59:13.969] The R5 Autosar Classic is running [2025-09-24 02:59:13.991] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:59:13.991] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:59:14.598] INIT: version 2.96 booting [2025-09-24 02:59:14.709] INIT: Entering runlevel: 5 [2025-09-24 02:59:14.870] mtd32 attached [2025-09-24 02:59:14.886] mtd28 attached [2025-09-24 02:59:14.886] mtd24 attached [2025-09-24 02:59:14.917] ubi0:dml_code is mounted. [2025-09-24 02:59:14.933] RTNETLINK answers: File exists [2025-09-24 02:59:14.999] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:59:14.999] ubi1:animations is mounted. [2025-09-24 02:59:14.999] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:59:14.999] ubi2:textures is mounted. [2025-09-24 02:59:14.999] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:59:14.999] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:59:14.999] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:59:14.999] data.LB_FadeInType0=100 [2025-09-24 02:59:14.999] data.CHLH_FadeInType0=0 [2025-09-24 02:59:14.999] data.WU_FadeInDelay=0 [2025-09-24 02:59:14.999] max_time_out=0 [2025-09-24 02:59:14.999] No splash screen [2025-09-24 02:59:14.999] stop dss Done [2025-09-24 02:59:15.031] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:59:15.074] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:59:15.074] /dev/mem opened. [2025-09-24 02:59:15.074] Memory mapped at address 0xffffa13ec000. [2025-09-24 02:59:15.074] Read at address 0x00600018 (0xffffa13ec018): 0x00000000 [2025-09-24 02:59:15.074] Write at address 0x00600018 (0xffffa13ec018): 0x00400040, readback 0x00400040 [2025-09-24 02:59:15.297] Loaded PowerVR consumer services. [2025-09-24 02:59:15.345] Waiting data available... [2025-09-24 02:59:15.361] 512+0 records in [2025-09-24 02:59:15.377] 512+0 records out [2025-09-24 02:59:15.393] Starting syslogd/klogd: done [2025-09-24 02:59:15.410] DML Start [2025-09-24 02:59:15.585] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:59:15.809] DML res1: 0 [2025-09-24 02:59:16.264] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:59:16.264] Read Success [2025-09-24 02:59:16.264] Verifying certificate... [2025-09-24 02:59:16.520] Verified OK [2025-09-24 02:59:16.536] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:59:18.152] Verified OK [2025-09-24 02:59:18.152] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:59:18.798] Verified OK [2025-09-24 02:59:18.798] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:59:21.405] fs.protected_hardlinks = 1 [2025-09-24 02:59:21.405] fs.protected_symlinks = 1 [2025-09-24 02:59:21.421] kernel.modules_disabled = 1 [2025-09-24 02:59:21.613] [2025-09-24 02:59:21.613] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:59:22.858] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:59:30.648] SBL1:1210.0.1.0 [2025-09-24 02:59:30.696] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:59:32.280] SBL2:1210.0.1.0 [2025-09-24 02:59:32.311] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:59:32.423] j-A [2025-09-24 02:59:39.797] The R5 Autosar Classic is running [2025-09-24 02:59:39.797] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 02:59:39.797] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 02:59:40.404] INIT: version 2.96 booting [2025-09-24 02:59:40.515] INIT: Entering runlevel: 5 [2025-09-24 02:59:40.676] mtd28 attached [2025-09-24 02:59:40.676] mtd24 attached [2025-09-24 02:59:40.692] mtd32 attached [2025-09-24 02:59:40.739] RTNETLINK answers: File exists [2025-09-24 02:59:40.787] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 02:59:40.787] ubi1:textures is mounted. [2025-09-24 02:59:40.787] ubi0:animations is mounted. [2025-09-24 02:59:40.787] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 02:59:40.787] ubi2:dml_code is mounted. [2025-09-24 02:59:40.787] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 02:59:40.787] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 02:59:40.787] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 02:59:40.813] data.LB_FadeInType0=100 [2025-09-24 02:59:40.813] data.CHLH_FadeInType0=0 [2025-09-24 02:59:40.813] data.WU_FadeInDelay=0 [2025-09-24 02:59:40.813] max_time_out=0 [2025-09-24 02:59:40.813] No splash screen [2025-09-24 02:59:40.813] stop dss Done [2025-09-24 02:59:40.830] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 02:59:40.846] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 02:59:40.862] /dev/mem opened. [2025-09-24 02:59:40.862] Memory mapped at address 0xffffabf26000. [2025-09-24 02:59:40.888] Read at address 0x00600018 (0xffffabf26018): 0x00000000 [2025-09-24 02:59:40.888] Write at address 0x00600018 (0xffffabf26018): 0x00400040, readback 0x00400040 [2025-09-24 02:59:40.968] Loaded PowerVR consumer services. [2025-09-24 02:59:41.144] Waiting data available... [2025-09-24 02:59:41.159] 512+0 records in [2025-09-24 02:59:41.159] 512+0 records out [2025-09-24 02:59:41.191] Starting syslogd/klogd: done [2025-09-24 02:59:41.207] DML Start [2025-09-24 02:59:41.400] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 02:59:41.591] DML res1: 0 [2025-09-24 02:59:41.991] Read DML Algo certificate (mtd31) and save to file [2025-09-24 02:59:42.006] Read Success [2025-09-24 02:59:42.006] Verifying certificate... [2025-09-24 02:59:42.231] Verified OK [2025-09-24 02:59:42.246] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 02:59:43.910] Verified OK [2025-09-24 02:59:43.930] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 02:59:44.528] Verified OK [2025-09-24 02:59:44.528] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 02:59:47.113] fs.protected_hardlinks = 1 [2025-09-24 02:59:47.113] fs.protected_symlinks = 1 [2025-09-24 02:59:47.113] kernel.modules_disabled = 1 [2025-09-24 02:59:47.305] [2025-09-24 02:59:47.305] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 02:59:48.638] RTNETLINK answers: Cannot assign requested address [2025-09-24 02:59:56.460] SBL1:1210.0.1.0 [2025-09-24 02:59:56.508] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:59:58.075] SBL2:1210.0.1.0 [2025-09-24 02:59:58.123] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 02:59:58.235] j-A [2025-09-24 03:00:05.605] The R5 Autosar Classic is running [2025-09-24 03:00:05.605] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:00:05.605] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:00:06.213] INIT: version 2.96 booting [2025-09-24 03:00:06.324] INIT: Entering runlevel: 5 [2025-09-24 03:00:06.468] mtd24 attached [2025-09-24 03:00:06.484] mtd32 attached [2025-09-24 03:00:06.500] mtd28 attached [2025-09-24 03:00:06.548] ubi0:textures is mounted. [2025-09-24 03:00:06.548] RTNETLINK answers: File exists [2025-09-24 03:00:06.583] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:00:06.583] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:00:06.583] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:00:06.583] ubi1:dml_code is mounted. [2025-09-24 03:00:06.583] ubi2:animations is mounted. [2025-09-24 03:00:06.583] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:00:06.583] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:00:06.599] data.LB_FadeInType0=100 [2025-09-24 03:00:06.599] data.CHLH_FadeInType0=0 [2025-09-24 03:00:06.620] data.WU_FadeInDelay=0 [2025-09-24 03:00:06.620] max_time_out=0 [2025-09-24 03:00:06.620] No splash screen [2025-09-24 03:00:06.620] stop dss Done [2025-09-24 03:00:06.636] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:00:06.652] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:00:06.688] /dev/mem opened. [2025-09-24 03:00:06.688] Memory mapped at address 0xffffb497c000. [2025-09-24 03:00:06.688] Read at address 0x00600018 (0xffffb497c018): 0x00000000 [2025-09-24 03:00:06.688] Write at address 0x00600018 (0xffffb497c018): 0x00400040, readback 0x00400040 [2025-09-24 03:00:06.768] Loaded PowerVR consumer services. [2025-09-24 03:00:06.960] Waiting data available... [2025-09-24 03:00:06.976] 512+0 records in [2025-09-24 03:00:06.976] 512+0 records out [2025-09-24 03:00:06.992] Starting syslogd/klogd: done [2025-09-24 03:00:07.024] DML Start [2025-09-24 03:00:07.200] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:00:07.455] DML res1: 0 [2025-09-24 03:00:07.861] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:00:07.861] Read Success [2025-09-24 03:00:07.861] Verifying certificate... [2025-09-24 03:00:08.085] Verified OK [2025-09-24 03:00:08.101] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:00:09.760] Verified OK [2025-09-24 03:00:09.760] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:00:10.399] Verified OK [2025-09-24 03:00:10.399] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:00:13.118] fs.protected_hardlinks = 1 [2025-09-24 03:00:13.134] fs.protected_symlinks = 1 [2025-09-24 03:00:13.134] kernel.modules_disabled = 1 [2025-09-24 03:00:13.326] [2025-09-24 03:00:13.326] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:00:14.443] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:00:22.254] SBL1:1210.0.1.0 [2025-09-24 03:00:22.302] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:00:23.869] SBL2:1210.0.1.0 [2025-09-24 03:00:23.917] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:00:24.029] j-A [2025-09-24 03:00:31.398] The R5 Autosar Classic is running [2025-09-24 03:00:31.398] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:00:31.398] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:00:32.005] INIT: version 2.96 booting [2025-09-24 03:00:32.134] INIT: Entering runlevel: 5 [2025-09-24 03:00:32.277] mtd32 attached [2025-09-24 03:00:32.293] mtd24 attached [2025-09-24 03:00:32.309] mtd28 attached [2025-09-24 03:00:32.325] ubi0:dml_code is mounted. [2025-09-24 03:00:32.414] RTNETLINK answers: File exists [2025-09-24 03:00:32.414] ubi1:textures is mounted. [2025-09-24 03:00:32.414] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:00:32.414] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:00:32.414] ubi2:animations is mounted. [2025-09-24 03:00:32.414] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:00:32.414] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:00:32.414] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:00:32.414] data.LB_FadeInType0=100 [2025-09-24 03:00:32.414] data.CHLH_FadeInType0=0 [2025-09-24 03:00:32.414] data.WU_FadeInDelay=0 [2025-09-24 03:00:32.414] max_time_out=0 [2025-09-24 03:00:32.414] No splash screen [2025-09-24 03:00:32.414] stop dss Done [2025-09-24 03:00:32.430] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:00:32.430] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:00:32.497] /dev/mem opened. [2025-09-24 03:00:32.497] Memory mapped at address 0xffffa144c000. [2025-09-24 03:00:32.497] Read at address 0x00600018 (0xffffa144c018): 0x00000000 [2025-09-24 03:00:32.497] Write at address 0x00600018 (0xffffa144c018): 0x00400040, readback 0x00400040 [2025-09-24 03:00:32.561] Loaded PowerVR consumer services. [2025-09-24 03:00:32.752] Waiting data available... [2025-09-24 03:00:32.784] 512+0 records in [2025-09-24 03:00:32.784] 512+0 records out [2025-09-24 03:00:32.833] Starting syslogd/klogd: done [2025-09-24 03:00:32.849] DML Start [2025-09-24 03:00:33.008] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:00:33.264] DML res1: 0 [2025-09-24 03:00:33.710] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:00:33.710] Read Success [2025-09-24 03:00:33.710] Verifying certificate... [2025-09-24 03:00:33.950] Verified OK [2025-09-24 03:00:33.966] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:00:35.453] Verified OK [2025-09-24 03:00:35.469] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:00:36.092] Verified OK [2025-09-24 03:00:36.092] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:00:38.778] fs.protected_hardlinks = 1 [2025-09-24 03:00:38.778] fs.protected_symlinks = 1 [2025-09-24 03:00:38.794] kernel.modules_disabled = 1 [2025-09-24 03:00:38.986] [2025-09-24 03:00:38.986] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:00:40.279] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:00:48.047] SBL1:1210.0.1.0 [2025-09-24 03:00:48.079] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:00:49.662] SBL2:1210.0.1.0 [2025-09-24 03:00:49.694] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:00:49.806] j-A [2025-09-24 03:00:57.181] The R5 Autosar Classic is running [2025-09-24 03:00:57.181] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:00:57.181] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:00:57.788] INIT: version 2.96 booting [2025-09-24 03:00:57.901] INIT: Entering runlevel: 5 [2025-09-24 03:00:58.060] mtd32 attached [2025-09-24 03:00:58.076] mtd28 attached [2025-09-24 03:00:58.076] mtd24 attached [2025-09-24 03:00:58.124] ubi0:dml_code is mounted. [2025-09-24 03:00:58.193] RTNETLINK answers: File exists [2025-09-24 03:00:58.193] ubi1:animations is mounted. [2025-09-24 03:00:58.193] ubi2:textures is mounted. [2025-09-24 03:00:58.193] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:00:58.193] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:00:58.193] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:00:58.193] data.LB_FadeInType0=100 [2025-09-24 03:00:58.193] data.CHLH_FadeInType0=0 [2025-09-24 03:00:58.193] data.WU_FadeInDelay=0 [2025-09-24 03:00:58.193] max_time_out=0 [2025-09-24 03:00:58.193] No splash screen [2025-09-24 03:00:58.193] stop dss Done [2025-09-24 03:00:58.193] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:00:58.193] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:00:58.263] /dev/mem opened. [2025-09-24 03:00:58.263] Memory mapped at address 0xffff9f7d0000. [2025-09-24 03:00:58.263] Read at address 0x00600018 (0xffff9f7d0018): 0x00000000 [2025-09-24 03:00:58.263] Write at address 0x00600018 (0xffff9f7d0018): 0x00400040, readback 0x00400040 [2025-09-24 03:00:58.263] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:00:58.263] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:00:58.407] Loaded PowerVR consumer services. [2025-09-24 03:00:58.551] Waiting data available... [2025-09-24 03:00:58.567] 512+0 records in [2025-09-24 03:00:58.567] 512+0 records out [2025-09-24 03:00:58.615] Starting syslogd/klogd: done [2025-09-24 03:00:58.631] DML Start [2025-09-24 03:00:58.822] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:00:59.063] DML res1: 0 [2025-09-24 03:00:59.469] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:00:59.469] Read Success [2025-09-24 03:00:59.469] Verifying certificate... [2025-09-24 03:00:59.692] Verified OK [2025-09-24 03:00:59.708] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:01:01.243] Verified OK [2025-09-24 03:01:01.243] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:01:01.882] Verified OK [2025-09-24 03:01:01.882] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:01:04.632] fs.protected_hardlinks = 1 [2025-09-24 03:01:04.648] fs.protected_symlinks = 1 [2025-09-24 03:01:04.648] kernel.modules_disabled = 1 [2025-09-24 03:01:04.840] [2025-09-24 03:01:04.840] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:01:06.075] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:01:13.831] SBL1:1210.0.1.0 [2025-09-24 03:01:13.879] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:01:15.462] SBL2:1210.0.1.0 [2025-09-24 03:01:15.494] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:01:15.606] j-A [2025-09-24 03:01:22.978] The R5 Autosar Classic is running [2025-09-24 03:01:22.978] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:01:22.978] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:01:23.585] INIT: version 2.96 booting [2025-09-24 03:01:23.698] INIT: Entering runlevel: 5 [2025-09-24 03:01:23.858] mtd24 attached [2025-09-24 03:01:23.858] mtd32 attached [2025-09-24 03:01:23.873] mtd28 attached [2025-09-24 03:01:23.905] ubi0:textures is mounted. [2025-09-24 03:01:23.994] RTNETLINK answers: File exists [2025-09-24 03:01:23.994] ubi1:dml_code is mounted. [2025-09-24 03:01:23.994] ubi2:animations is mounted. [2025-09-24 03:01:23.994] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:01:23.994] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:01:23.994] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:01:23.994] data.LB_FadeInType0=100 [2025-09-24 03:01:23.994] data.CHLH_FadeInType0=0 [2025-09-24 03:01:23.994] data.WU_FadeInDelay=0 [2025-09-24 03:01:23.994] max_time_out=0 [2025-09-24 03:01:23.994] No splash screen [2025-09-24 03:01:23.994] stop dss Done [2025-09-24 03:01:23.994] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:01:23.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:01:24.061] /dev/mem opened. [2025-09-24 03:01:24.061] Memory mapped at address 0xffffa1da8000. [2025-09-24 03:01:24.061] Read at address 0x00600018 (0xffffa1da8018): 0x00000000 [2025-09-24 03:01:24.061] Write at address 0x00600018 (0xffffa1da8018): 0x00400040, readback 0x00400040 [2025-09-24 03:01:24.109] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:01:24.125] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:01:24.204] Loaded PowerVR consumer services. [2025-09-24 03:01:24.332] Waiting data available... [2025-09-24 03:01:24.332] 512+0 records in [2025-09-24 03:01:24.332] 512+0 records out [2025-09-24 03:01:24.380] Starting syslogd/klogd: done [2025-09-24 03:01:24.396] DML Start [2025-09-24 03:01:24.572] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:01:24.796] DML res1: 0 [2025-09-24 03:01:25.237] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:01:25.237] Read Success [2025-09-24 03:01:25.237] Verifying certificate... [2025-09-24 03:01:25.524] Verified OK [2025-09-24 03:01:25.540] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:01:27.265] Verified OK [2025-09-24 03:01:27.265] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:01:27.885] Verified OK [2025-09-24 03:01:27.885] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:01:30.475] fs.protected_hardlinks = 1 [2025-09-24 03:01:30.505] fs.protected_symlinks = 1 [2025-09-24 03:01:30.505] kernel.modules_disabled = 1 [2025-09-24 03:01:30.681] [2025-09-24 03:01:30.681] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:01:31.839] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:01:39.644] SBL1:1210.0.1.0 [2025-09-24 03:01:39.692] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:01:41.258] SBL2:1210.0.1.0 [2025-09-24 03:01:41.306] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:01:41.418] j-A [2025-09-24 03:01:48.757] The R5 Autosar Classic is running [2025-09-24 03:01:48.788] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:01:48.788] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:01:49.396] INIT: version 2.96 booting [2025-09-24 03:01:49.508] INIT: Entering runlevel: 5 [2025-09-24 03:01:49.667] mtd24 attached [2025-09-24 03:01:49.667] mtd28 attached [2025-09-24 03:01:49.684] mtd32 attached [2025-09-24 03:01:49.732] ubi1:animations is mounted. [2025-09-24 03:01:49.732] RTNETLINK answers: File exists [2025-09-24 03:01:49.784] ubi0:textures is mounted. [2025-09-24 03:01:49.784] ubi2:dml_code is mounted. [2025-09-24 03:01:49.784] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:01:49.784] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:01:49.784] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:01:49.784] data.LB_FadeInType0=100 [2025-09-24 03:01:49.784] data.CHLH_FadeInType0=0 [2025-09-24 03:01:49.784] data.WU_FadeInDelay=0 [2025-09-24 03:01:49.784] max_time_out=0 [2025-09-24 03:01:49.784] No splash screen [2025-09-24 03:01:49.784] stop dss Done [2025-09-24 03:01:49.800] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:01:49.816] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:01:49.855] /dev/mem opened. [2025-09-24 03:01:49.855] Memory mapped at address 0xffffadd65000. [2025-09-24 03:01:49.855] Read at address 0x00600018 (0xffffadd65018): 0x00000000 [2025-09-24 03:01:49.855] Write at address 0x00600018 (0xffffadd65018): 0x00400040, readback 0x00400040 [2025-09-24 03:01:49.886] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:01:49.908] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:01:50.037] Loaded PowerVR consumer services. [2025-09-24 03:01:50.148] Waiting data available... [2025-09-24 03:01:50.164] 512+0 records in [2025-09-24 03:01:50.164] 512+0 records out [2025-09-24 03:01:50.180] Starting syslogd/klogd: done [2025-09-24 03:01:50.212] DML Start [2025-09-24 03:01:50.388] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:01:50.628] DML res1: 0 [2025-09-24 03:01:51.011] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:01:51.011] Read Success [2025-09-24 03:01:51.011] Verifying certificate... [2025-09-24 03:01:51.266] Verified OK [2025-09-24 03:01:51.266] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:01:52.865] Verified OK [2025-09-24 03:01:52.865] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:01:53.542] Verified OK [2025-09-24 03:01:53.542] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:01:56.260] fs.protected_hardlinks = 1 [2025-09-24 03:01:56.276] fs.protected_symlinks = 1 [2025-09-24 03:01:56.276] kernel.modules_disabled = 1 [2025-09-24 03:01:56.468] [2025-09-24 03:01:56.468] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:01:57.690] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:02:05.451] SBL1:1210.0.1.0 [2025-09-24 03:02:05.483] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:02:07.065] SBL2:1210.0.1.0 [2025-09-24 03:02:07.097] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:02:07.210] j-A [2025-09-24 03:02:14.584] The R5 Autosar Classic is running [2025-09-24 03:02:14.584] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:02:14.584] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:02:15.192] INIT: version 2.96 booting [2025-09-24 03:02:15.303] INIT: Entering runlevel: 5 [2025-09-24 03:02:15.463] mtd28 attached [2025-09-24 03:02:15.463] mtd24 attached [2025-09-24 03:02:15.479] mtd32 attached [2025-09-24 03:02:15.527] RTNETLINK answers: File exists [2025-09-24 03:02:15.527] ubi0:animations is mounted. [2025-09-24 03:02:15.593] ubi1:textures is mounted. [2025-09-24 03:02:15.593] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:02:15.593] ubi2:dml_code is mounted. [2025-09-24 03:02:15.593] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:02:15.593] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:02:15.593] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:02:15.593] data.LB_FadeInType0=100 [2025-09-24 03:02:15.593] data.CHLH_FadeInType0=0 [2025-09-24 03:02:15.593] data.WU_FadeInDelay=0 [2025-09-24 03:02:15.593] max_time_out=0 [2025-09-24 03:02:15.593] No splash screen [2025-09-24 03:02:15.593] stop dss Done [2025-09-24 03:02:15.593] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:02:15.626] /dev/mem opened. [2025-09-24 03:02:15.662] Memory mapped at address 0xffffb1329000. [2025-09-24 03:02:15.662] Read at address 0x00600018 (0xffffb1329018): 0x00000000 [2025-09-24 03:02:15.662] Write at address 0x00600018 (0xffffb1329018): 0x00400040, readback 0x00400040 [2025-09-24 03:02:15.662] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:02:15.662] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:02:15.774] Loaded PowerVR consumer services. [2025-09-24 03:02:15.934] Waiting data available... [2025-09-24 03:02:15.966] 512+0 records in [2025-09-24 03:02:15.966] 512+0 records out [2025-09-24 03:02:15.997] Starting syslogd/klogd: done [2025-09-24 03:02:16.013] DML Start [2025-09-24 03:02:16.190] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:02:16.414] DML res1: 0 [2025-09-24 03:02:16.874] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:02:16.874] Read Success [2025-09-24 03:02:16.874] Verifying certificate... [2025-09-24 03:02:17.130] Verified OK [2025-09-24 03:02:17.146] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:02:18.849] Verified OK [2025-09-24 03:02:18.849] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:02:19.467] Verified OK [2025-09-24 03:02:19.467] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:02:22.073] fs.protected_hardlinks = 1 [2025-09-24 03:02:22.073] fs.protected_symlinks = 1 [2025-09-24 03:02:22.089] kernel.modules_disabled = 1 [2025-09-24 03:02:22.280] [2025-09-24 03:02:22.280] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:02:23.460] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:02:31.234] SBL1:1210.0.1.0 [2025-09-24 03:02:31.282] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:02:32.849] SBL2:1210.0.1.0 [2025-09-24 03:02:32.896] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:02:33.008] j-A [2025-09-24 03:02:40.348] The R5 Autosar Classic is running [2025-09-24 03:02:40.379] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:02:40.379] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:02:40.987] INIT: version 2.96 booting [2025-09-24 03:02:41.099] INIT: Entering runlevel: 5 [2025-09-24 03:02:41.243] mtd24 attached [2025-09-24 03:02:41.259] mtd28 attached [2025-09-24 03:02:41.275] mtd32 attached [2025-09-24 03:02:41.307] ubi0:textures is mounted. [2025-09-24 03:02:41.323] ubi1:animations is mounted. [2025-09-24 03:02:41.323] ubi2:dml_code is mounted. [2025-09-24 03:02:41.378] RTNETLINK answers: File exists [2025-09-24 03:02:41.378] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:02:41.378] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:02:41.378] data.LB_FadeInType0=100 [2025-09-24 03:02:41.378] data.CHLH_FadeInType0=0 [2025-09-24 03:02:41.378] data.WU_FadeInDelay=0 [2025-09-24 03:02:41.378] max_time_out=0 [2025-09-24 03:02:41.378] No splash screen [2025-09-24 03:02:41.378] stop dss Done [2025-09-24 03:02:41.378] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:02:41.378] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:02:41.378] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:02:41.447] /dev/mem opened. [2025-09-24 03:02:41.447] Memory mapped at address 0xffff9c094000. [2025-09-24 03:02:41.447] Read at address 0x00600018 (0xffff9c094018): 0x00000000 [2025-09-24 03:02:41.447] Write at address 0x00600018 (0xffff9c094018): 0x00400040, readback 0x00400040 [2025-09-24 03:02:41.464] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:02:41.479] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:02:41.592] Loaded PowerVR consumer services. [2025-09-24 03:02:41.736] Waiting data available... [2025-09-24 03:02:41.751] 512+0 records in [2025-09-24 03:02:41.751] 512+0 records out [2025-09-24 03:02:41.799] Starting syslogd/klogd: done [2025-09-24 03:02:41.815] DML Start [2025-09-24 03:02:42.007] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:02:42.200] DML res1: 0 [2025-09-24 03:02:42.647] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:02:42.663] Read Success [2025-09-24 03:02:42.663] Verifying certificate... [2025-09-24 03:02:42.919] Verified OK [2025-09-24 03:02:42.935] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:02:44.582] Verified OK [2025-09-24 03:02:44.582] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:02:45.243] Verified OK [2025-09-24 03:02:45.243] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:02:47.801] fs.protected_hardlinks = 1 [2025-09-24 03:02:47.817] fs.protected_symlinks = 1 [2025-09-24 03:02:47.817] kernel.modules_disabled = 1 [2025-09-24 03:02:48.024] [2025-09-24 03:02:48.024] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:02:49.267] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:02:57.031] SBL1:1210.0.1.0 [2025-09-24 03:02:57.079] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:02:58.646] SBL2:1210.0.1.0 [2025-09-24 03:02:58.693] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 03:02:58.789] j-A [2025-09-24 03:03:06.144] The R5 Autosar Classic is running [2025-09-24 03:03:06.166] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:03:06.166] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:03:06.775] INIT: version 2.96 booting [2025-09-24 03:03:06.885] INIT: Entering runlevel: 5 [2025-09-24 03:03:07.030] mtd24 attached [2025-09-24 03:03:07.046] mtd28 attached [2025-09-24 03:03:07.062] mtd32 attached [2025-09-24 03:03:07.094] ubi0:textures is mounted. [2025-09-24 03:03:07.145] RTNETLINK answers: File exists [2025-09-24 03:03:07.145] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:03:07.145] ubi1:animations is mounted. [2025-09-24 03:03:07.145] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:03:07.145] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:03:07.145] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:03:07.145] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:03:07.145] ubi2:dml_code is mounted. [2025-09-24 03:03:07.195] data.LB_FadeInType0=100 [2025-09-24 03:03:07.195] data.CHLH_FadeInType0=0 [2025-09-24 03:03:07.195] data.WU_FadeInDelay=0 [2025-09-24 03:03:07.195] max_time_out=0 [2025-09-24 03:03:07.195] No splash screen [2025-09-24 03:03:07.195] stop dss Done [2025-09-24 03:03:07.195] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:03:07.195] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:03:07.245] /dev/mem opened. [2025-09-24 03:03:07.245] Memory mapped at address 0xffffb9581000. [2025-09-24 03:03:07.245] Read at address 0x00600018 (0xffffb9581018): 0x00000000 [2025-09-24 03:03:07.245] Write at address 0x00600018 (0xffffb9581018): 0x00400040, readback 0x00400040 [2025-09-24 03:03:07.341] Loaded PowerVR consumer services. [2025-09-24 03:03:07.516] Waiting data available... [2025-09-24 03:03:07.548] 512+0 records in [2025-09-24 03:03:07.548] 512+0 records out [2025-09-24 03:03:07.564] Starting syslogd/klogd: done [2025-09-24 03:03:07.580] DML Start [2025-09-24 03:03:07.756] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:03:07.997] DML res1: 0 [2025-09-24 03:03:08.376] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:03:08.376] Read Success [2025-09-24 03:03:08.376] Verifying certificate... [2025-09-24 03:03:08.599] Verified OK [2025-09-24 03:03:08.615] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:03:10.262] Verified OK [2025-09-24 03:03:10.262] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:03:10.895] Verified OK [2025-09-24 03:03:10.895] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:03:13.517] fs.protected_hardlinks = 1 [2025-09-24 03:03:13.545] fs.protected_symlinks = 1 [2025-09-24 03:03:13.545] kernel.modules_disabled = 1 [2025-09-24 03:03:13.721] [2025-09-24 03:03:13.721] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:03:15.018] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:03:22.805] SBL1:1210.0.1.0 [2025-09-24 03:03:22.854] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:03:24.421] SBL2:1210.0.1.0 [2025-09-24 03:03:24.469] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:03:24.580] j-A [2025-09-24 03:03:31.919] The R5 Autosar Classic is running [2025-09-24 03:03:31.950] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:03:31.950] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:03:32.558] INIT: version 2.96 booting [2025-09-24 03:03:32.670] INIT: Entering runlevel: 5 [2025-09-24 03:03:32.829] mtd24 attached [2025-09-24 03:03:32.829] mtd32 attached [2025-09-24 03:03:32.845] mtd28 attached [2025-09-24 03:03:32.893] ubi0:textures is mounted. [2025-09-24 03:03:32.893] RTNETLINK answers: File exists [2025-09-24 03:03:32.950] ubi2:animations is mounted. [2025-09-24 03:03:32.950] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:03:32.950] ubi1:dml_code is mounted. [2025-09-24 03:03:32.950] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:03:32.950] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:03:32.950] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:03:32.950] data.LB_FadeInType0=100 [2025-09-24 03:03:32.950] data.CHLH_FadeInType0=0 [2025-09-24 03:03:32.950] data.WU_FadeInDelay=0 [2025-09-24 03:03:32.950] max_time_out=0 [2025-09-24 03:03:32.950] No splash screen [2025-09-24 03:03:32.950] stop dss Done [2025-09-24 03:03:32.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:03:32.982] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:03:33.020] /dev/mem opened. [2025-09-24 03:03:33.020] Memory mapped at address 0xffffbede3000. [2025-09-24 03:03:33.020] Read at address 0x00600018 (0xffffbede3018): 0x00000000 [2025-09-24 03:03:33.020] Write at address 0x00600018 (0xffffbede3018): 0x00400040, readback 0x00400040 [2025-09-24 03:03:33.020] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:03:33.164] Loaded PowerVR consumer services. [2025-09-24 03:03:33.324] Waiting data available... [2025-09-24 03:03:33.340] 512+0 records in [2025-09-24 03:03:33.340] 512+0 records out [2025-09-24 03:03:33.387] Starting syslogd/klogd: done [2025-09-24 03:03:33.403] DML Start [2025-09-24 03:03:33.612] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:03:33.851] DML res1: 0 [2025-09-24 03:03:34.233] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:03:34.233] Read Success [2025-09-24 03:03:34.233] Verifying certificate... [2025-09-24 03:03:34.441] Verified OK [2025-09-24 03:03:34.457] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:03:35.929] Verified OK [2025-09-24 03:03:35.929] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:03:36.582] Verified OK [2025-09-24 03:03:36.582] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:03:39.285] fs.protected_hardlinks = 1 [2025-09-24 03:03:39.301] fs.protected_symlinks = 1 [2025-09-24 03:03:39.317] kernel.modules_disabled = 1 [2025-09-24 03:03:39.525] [2025-09-24 03:03:39.525] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:03:40.901] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:03:48.627] SBL1:1210.0.1.0 [2025-09-24 03:03:48.659] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:03:50.241] SBL2:1210.0.1.0 [2025-09-24 03:03:50.273] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:03:50.385] j-A [2025-09-24 03:03:57.739] The R5 Autosar Classic is running [2025-09-24 03:03:57.739] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:03:57.760] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:03:58.367] INIT: version 2.96 booting [2025-09-24 03:03:58.480] INIT: Entering runlevel: 5 [2025-09-24 03:03:58.623] mtd24 attached [2025-09-24 03:03:58.639] mtd28 attached [2025-09-24 03:03:58.655] mtd32 attached [2025-09-24 03:03:58.703] ubi0:textures is mounted. [2025-09-24 03:03:58.703] RTNETLINK answers: File exists [2025-09-24 03:03:58.741] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:03:58.741] ubi1:animations is mounted. [2025-09-24 03:03:58.741] ubi2:dml_code is mounted. [2025-09-24 03:03:58.741] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:03:58.741] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:03:58.741] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:03:58.741] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:03:58.766] data.LB_FadeInType0=100 [2025-09-24 03:03:58.766] data.CHLH_FadeInType0=0 [2025-09-24 03:03:58.766] data.WU_FadeInDelay=0 [2025-09-24 03:03:58.766] max_time_out=0 [2025-09-24 03:03:58.766] No splash screen [2025-09-24 03:03:58.766] stop dss Done [2025-09-24 03:03:58.814] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:03:58.847] /dev/mem opened. [2025-09-24 03:03:58.847] Memory mapped at address 0xffffb4e89000. [2025-09-24 03:03:58.847] Read at address 0x00600018 (0xffffb4e89018): 0x00000000 [2025-09-24 03:03:58.847] Write at address 0x00600018 (0xffffb4e89018): 0x00400040, readback 0x00400040 [2025-09-24 03:03:58.847] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:03:58.911] Loaded PowerVR consumer services. [2025-09-24 03:03:59.102] Waiting data available... [2025-09-24 03:03:59.134] 512+0 records in [2025-09-24 03:03:59.134] 512+0 records out [2025-09-24 03:03:59.182] Starting syslogd/klogd: done [2025-09-24 03:03:59.198] DML Start [2025-09-24 03:03:59.390] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:03:59.582] DML res1: 0 [2025-09-24 03:04:00.051] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:04:00.051] Read Success [2025-09-24 03:04:00.051] Verifying certificate... [2025-09-24 03:04:00.260] Verified OK [2025-09-24 03:04:00.291] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:04:02.057] Verified OK [2025-09-24 03:04:02.057] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:04:02.622] Verified OK [2025-09-24 03:04:02.622] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:04:05.117] fs.protected_hardlinks = 1 [2025-09-24 03:04:05.117] fs.protected_symlinks = 1 [2025-09-24 03:04:05.133] kernel.modules_disabled = 1 [2025-09-24 03:04:05.341] [2025-09-24 03:04:05.341] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:04:06.612] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:04:14.411] SBL1:1210.0.1.0 [2025-09-24 03:04:14.459] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:04:16.042] SBL2:1210.0.1.0 [2025-09-24 03:04:16.074] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:04:16.186] j-A [2025-09-24 03:04:23.560] The R5 Autosar Classic is running [2025-09-24 03:04:23.560] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:04:23.560] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:04:24.166] INIT: version 2.96 booting [2025-09-24 03:04:24.278] INIT: Entering runlevel: 5 [2025-09-24 03:04:24.439] mtd28 attached [2025-09-24 03:04:24.439] mtd32 attached [2025-09-24 03:04:24.455] mtd24 attached [2025-09-24 03:04:24.503] RTNETLINK answers: File exists [2025-09-24 03:04:24.503] ubi1:dml_code is mounted. [2025-09-24 03:04:24.537] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:04:24.537] ubi0:animations is mounted. [2025-09-24 03:04:24.537] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:04:24.537] ubi2:textures is mounted. [2025-09-24 03:04:24.537] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:04:24.537] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:04:24.537] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:04:24.560] data.LB_FadeInType0=100 [2025-09-24 03:04:24.560] data.CHLH_FadeInType0=0 [2025-09-24 03:04:24.560] data.WU_FadeInDelay=0 [2025-09-24 03:04:24.560] max_time_out=0 [2025-09-24 03:04:24.560] No splash screen [2025-09-24 03:04:24.560] stop dss Done [2025-09-24 03:04:24.576] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:04:24.602] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:04:24.636] /dev/mem opened. [2025-09-24 03:04:24.636] Memory mapped at address 0xffffaba9b000. [2025-09-24 03:04:24.636] Read at address 0x00600018 (0xffffaba9b018): 0x00000000 [2025-09-24 03:04:24.636] Write at address 0x00600018 (0xffffaba9b018): 0x00400040, readback 0x00400040 [2025-09-24 03:04:24.716] Loaded PowerVR consumer services. [2025-09-24 03:04:24.908] Waiting data available... [2025-09-24 03:04:24.940] 512+0 records in [2025-09-24 03:04:24.940] 512+0 records out [2025-09-24 03:04:24.955] Starting syslogd/klogd: done [2025-09-24 03:04:24.972] DML Start [2025-09-24 03:04:25.132] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:04:25.356] DML res1: 0 [2025-09-24 03:04:25.796] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:04:25.796] Read Success [2025-09-24 03:04:25.796] Verifying certificate... [2025-09-24 03:04:26.020] Verified OK [2025-09-24 03:04:26.036] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:04:27.713] Verified OK [2025-09-24 03:04:27.713] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:04:28.326] Verified OK [2025-09-24 03:04:28.326] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:04:30.980] fs.protected_hardlinks = 1 [2025-09-24 03:04:30.980] fs.protected_symlinks = 1 [2025-09-24 03:04:30.996] kernel.modules_disabled = 1 [2025-09-24 03:04:31.188] [2025-09-24 03:04:31.188] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:04:32.415] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:04:40.221] SBL1:1210.0.1.0 [2025-09-24 03:04:40.269] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:04:41.836] SBL2:1210.0.1.0 [2025-09-24 03:04:41.884] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:04:41.996] j-A [2025-09-24 03:04:49.365] The R5 Autosar Classic is running [2025-09-24 03:04:49.365] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:04:49.365] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:04:49.972] INIT: version 2.96 booting [2025-09-24 03:04:50.084] INIT: Entering runlevel: 5 [2025-09-24 03:04:50.228] mtd24 attached [2025-09-24 03:04:50.244] mtd28 attached [2025-09-24 03:04:50.276] mtd32 attached [2025-09-24 03:04:50.292] ubi0:textures is mounted. [2025-09-24 03:04:50.308] ubi1:animations is mounted. [2025-09-24 03:04:50.324] RTNETLINK answers: File exists [2025-09-24 03:04:50.324] ubi2:dml_code is mounted. [2025-09-24 03:04:50.382] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:04:50.382] data.LB_FadeInType0=100 [2025-09-24 03:04:50.382] data.CHLH_FadeInType0=0 [2025-09-24 03:04:50.382] data.WU_FadeInDelay=0 [2025-09-24 03:04:50.382] max_time_out=0 [2025-09-24 03:04:50.382] No splash screen [2025-09-24 03:04:50.382] stop dss Done [2025-09-24 03:04:50.382] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:04:50.382] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:04:50.382] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:04:50.382] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:04:50.436] /dev/mem opened. [2025-09-24 03:04:50.436] Memory mapped at address 0xffffb18d7000. [2025-09-24 03:04:50.436] Read at address 0x00600018 (0xffffb18d7018): 0x00000000 [2025-09-24 03:04:50.436] Write at address 0x00600018 (0xffffb18d7018): 0x00400040, readback 0x00400040 [2025-09-24 03:04:50.452] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:04:50.452] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:04:50.532] Loaded PowerVR consumer services. [2025-09-24 03:04:50.723] Waiting data available... [2025-09-24 03:04:50.740] 512+0 records in [2025-09-24 03:04:50.740] 512+0 records out [2025-09-24 03:04:50.772] Starting syslogd/klogd: done [2025-09-24 03:04:50.788] DML Start [2025-09-24 03:04:50.947] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:04:51.156] DML res1: 0 [2025-09-24 03:04:51.593] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:04:51.593] Read Success [2025-09-24 03:04:51.593] Verifying certificate... [2025-09-24 03:04:51.881] Verified OK [2025-09-24 03:04:51.897] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:04:53.471] Verified OK [2025-09-24 03:04:53.471] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:04:54.025] Verified OK [2025-09-24 03:04:54.025] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:04:56.680] fs.protected_hardlinks = 1 [2025-09-24 03:04:56.680] fs.protected_symlinks = 1 [2025-09-24 03:04:56.696] kernel.modules_disabled = 1 [2025-09-24 03:04:56.903] [2025-09-24 03:04:56.903] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:04:58.230] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:05:06.022] SBL1:1210.0.1.0 [2025-09-24 03:05:06.070] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:05:07.636] SBL2:1210.0.1.0 [2025-09-24 03:05:07.684] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:05:07.795] j-A [2025-09-24 03:05:15.166] The R5 Autosar Classic is running [2025-09-24 03:05:15.166] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:05:15.166] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:05:15.773] INIT: version 2.96 booting [2025-09-24 03:05:15.885] INIT: Entering runlevel: 5 [2025-09-24 03:05:16.044] mtd28 attached [2025-09-24 03:05:16.060] mtd32 attached [2025-09-24 03:05:16.060] mtd24 attached [2025-09-24 03:05:16.093] ubi0:animations is mounted. [2025-09-24 03:05:16.180] RTNETLINK answers: File exists [2025-09-24 03:05:16.180] ubi2:textures is mounted. [2025-09-24 03:05:16.180] ubi1:dml_code is mounted. [2025-09-24 03:05:16.180] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:05:16.180] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:05:16.180] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:05:16.180] data.LB_FadeInType0=100 [2025-09-24 03:05:16.180] data.CHLH_FadeInType0=0 [2025-09-24 03:05:16.180] data.WU_FadeInDelay=0 [2025-09-24 03:05:16.180] max_time_out=0 [2025-09-24 03:05:16.180] No splash screen [2025-09-24 03:05:16.180] stop dss Done [2025-09-24 03:05:16.180] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:05:16.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:05:16.248] /dev/mem opened. [2025-09-24 03:05:16.248] Memory mapped at address 0xffff95ddb000. [2025-09-24 03:05:16.248] Read at address 0x00600018 (0xffff95ddb018): 0x00000000 [2025-09-24 03:05:16.248] Write at address 0x00600018 (0xffff95ddb018): 0x00400040, readback 0x00400040 [2025-09-24 03:05:16.280] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:05:16.296] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:05:16.360] Loaded PowerVR consumer services. [2025-09-24 03:05:16.519] Waiting data available... [2025-09-24 03:05:16.552] 512+0 records in [2025-09-24 03:05:16.552] 512+0 records out [2025-09-24 03:05:16.584] Starting syslogd/klogd: done [2025-09-24 03:05:16.600] DML Start [2025-09-24 03:05:16.776] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:05:17.015] DML res1: 0 [2025-09-24 03:05:17.446] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:05:17.446] Read Success [2025-09-24 03:05:17.446] Verifying certificate... [2025-09-24 03:05:17.717] Verified OK [2025-09-24 03:05:17.750] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:05:19.427] Verified OK [2025-09-24 03:05:19.427] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:05:20.034] Verified OK [2025-09-24 03:05:20.034] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:05:22.560] fs.protected_hardlinks = 1 [2025-09-24 03:05:22.591] fs.protected_symlinks = 1 [2025-09-24 03:05:22.591] kernel.modules_disabled = 1 [2025-09-24 03:05:22.784] [2025-09-24 03:05:22.784] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:05:24.039] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:05:31.813] SBL1:1210.0.1.0 [2025-09-24 03:05:31.861] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:05:33.428] SBL2:1210.0.1.0 [2025-09-24 03:05:33.476] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:05:33.572] j-A [2025-09-24 03:05:40.927] The R5 Autosar Classic is running [2025-09-24 03:05:40.952] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:05:40.952] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:05:41.559] INIT: version 2.96 booting [2025-09-24 03:05:41.671] INIT: Entering runlevel: 5 [2025-09-24 03:05:41.815] mtd28 attached [2025-09-24 03:05:41.831] mtd32 attached [2025-09-24 03:05:41.847] mtd24 attached [2025-09-24 03:05:41.863] ubi0:animations is mounted. [2025-09-24 03:05:41.895] ubi1:dml_code is mounted. [2025-09-24 03:05:41.895] RTNETLINK answers: File exists [2025-09-24 03:05:41.956] ubi2:textures is mounted. [2025-09-24 03:05:41.956] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:05:41.956] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:05:41.956] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:05:41.956] data.LB_FadeInType0=100 [2025-09-24 03:05:41.956] data.CHLH_FadeInType0=0 [2025-09-24 03:05:41.957] data.WU_FadeInDelay=0 [2025-09-24 03:05:41.957] max_time_out=0 [2025-09-24 03:05:41.957] No splash screen [2025-09-24 03:05:41.957] stop dss Done [2025-09-24 03:05:41.957] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:05:41.957] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:05:42.028] /dev/mem opened. [2025-09-24 03:05:42.028] Memory mapped at address 0xffffa4cd7000. [2025-09-24 03:05:42.028] Read at address 0x00600018 (0xffffa4cd7018): 0x00000000 [2025-09-24 03:05:42.028] Write at address 0x00600018 (0xffffa4cd7018): 0x00400040, readback 0x00400040 [2025-09-24 03:05:42.060] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:05:42.076] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:05:42.156] Loaded PowerVR consumer services. [2025-09-24 03:05:42.315] Waiting data available... [2025-09-24 03:05:42.331] 512+0 records in [2025-09-24 03:05:42.331] 512+0 records out [2025-09-24 03:05:42.380] Starting syslogd/klogd: done [2025-09-24 03:05:42.396] DML Start [2025-09-24 03:05:42.571] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:05:42.780] DML res1: 0 [2025-09-24 03:05:43.243] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:05:43.264] Read Success [2025-09-24 03:05:43.264] Verifying certificate... [2025-09-24 03:05:43.487] Verified OK [2025-09-24 03:05:43.519] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:05:45.102] Verified OK [2025-09-24 03:05:45.102] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:05:45.747] Verified OK [2025-09-24 03:05:45.747] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:05:48.305] fs.protected_hardlinks = 1 [2025-09-24 03:05:48.321] fs.protected_symlinks = 1 [2025-09-24 03:05:48.321] kernel.modules_disabled = 1 [2025-09-24 03:05:48.529] [2025-09-24 03:05:48.529] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:05:49.809] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:05:57.621] SBL1:1210.0.1.0 [2025-09-24 03:05:57.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:05:59.237] SBL2:1210.0.1.0 [2025-09-24 03:05:59.268] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:05:59.380] j-A [2025-09-24 03:06:06.753] The R5 Autosar Classic is running [2025-09-24 03:06:06.753] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:06:06.753] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:06:07.361] INIT: version 2.96 booting [2025-09-24 03:06:07.472] INIT: Entering runlevel: 5 [2025-09-24 03:06:07.632] mtd32 attached [2025-09-24 03:06:07.648] mtd28 attached [2025-09-24 03:06:07.648] mtd24 attached [2025-09-24 03:06:07.712] RTNETLINK answers: File exists [2025-09-24 03:06:07.712] ubi2:textures is mounted. [2025-09-24 03:06:07.772] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:06:07.772] ubi1:animations is mounted. [2025-09-24 03:06:07.772] ubi0:dml_code is mounted. [2025-09-24 03:06:07.772] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:06:07.772] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:06:07.772] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:06:07.772] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:06:07.772] data.LB_FadeInType0=100 [2025-09-24 03:06:07.772] data.CHLH_FadeInType0=0 [2025-09-24 03:06:07.772] data.WU_FadeInDelay=0 [2025-09-24 03:06:07.772] max_time_out=0 [2025-09-24 03:06:07.772] No splash screen [2025-09-24 03:06:07.772] stop dss Done [2025-09-24 03:06:07.788] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:06:07.819] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:06:07.856] /dev/mem opened. [2025-09-24 03:06:07.856] Memory mapped at address 0xffff9ee10000. [2025-09-24 03:06:07.856] Read at address 0x00600018 (0xffff9ee10018): 0x00000000 [2025-09-24 03:06:07.856] Write at address 0x00600018 (0xffff9ee10018): 0x00400040, readback 0x00400040 [2025-09-24 03:06:07.920] Loaded PowerVR consumer services. [2025-09-24 03:06:08.112] Waiting data available... [2025-09-24 03:06:08.144] 512+0 records in [2025-09-24 03:06:08.144] 512+0 records out [2025-09-24 03:06:08.191] Starting syslogd/klogd: done [2025-09-24 03:06:08.208] DML Start [2025-09-24 03:06:08.384] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:06:08.592] DML res1: 0 [2025-09-24 03:06:09.012] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:06:09.012] Read Success [2025-09-24 03:06:09.012] Verifying certificate... [2025-09-24 03:06:09.237] Verified OK [2025-09-24 03:06:09.237] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:06:10.766] Verified OK [2025-09-24 03:06:10.766] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:06:11.340] Verified OK [2025-09-24 03:06:11.340] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:06:14.169] fs.protected_hardlinks = 1 [2025-09-24 03:06:14.169] fs.protected_symlinks = 1 [2025-09-24 03:06:14.185] kernel.modules_disabled = 1 [2025-09-24 03:06:14.376] [2025-09-24 03:06:14.376] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:06:15.605] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:06:23.398] SBL1:1210.0.1.0 [2025-09-24 03:06:23.446] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:06:25.012] SBL2:1210.0.1.0 [2025-09-24 03:06:25.060] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:06:25.172] j-A [2025-09-24 03:06:32.545] The R5 Autosar Classic is running [2025-09-24 03:06:32.545] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:06:32.545] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:06:33.153] INIT: version 2.96 booting [2025-09-24 03:06:33.264] INIT: Entering runlevel: 5 [2025-09-24 03:06:33.408] mtd24 attached [2025-09-24 03:06:33.424] mtd32 attached [2025-09-24 03:06:33.457] mtd28 attached [2025-09-24 03:06:33.457] ubi0:textures is mounted. [2025-09-24 03:06:33.472] ubi1:dml_code is mounted. [2025-09-24 03:06:33.488] RTNETLINK answers: File exists [2025-09-24 03:06:33.545] ubi2:animations is mounted. [2025-09-24 03:06:33.545] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:06:33.545] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:06:33.545] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:06:33.545] data.LB_FadeInType0=100 [2025-09-24 03:06:33.545] data.CHLH_FadeInType0=0 [2025-09-24 03:06:33.545] data.WU_FadeInDelay=0 [2025-09-24 03:06:33.545] max_time_out=0 [2025-09-24 03:06:33.545] No splash screen [2025-09-24 03:06:33.545] stop dss Done [2025-09-24 03:06:33.545] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:06:33.545] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:06:33.584] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:06:33.584] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:06:33.584] /dev/mem opened. [2025-09-24 03:06:33.616] Memory mapped at address 0xffff8bbef000. [2025-09-24 03:06:33.616] Read at address 0x00600018 (0xffff8bbef018): 0x00000000 [2025-09-24 03:06:33.616] Write at address 0x00600018 (0xffff8bbef018): 0x00400040, readback 0x00400040 [2025-09-24 03:06:33.696] Loaded PowerVR consumer services. [2025-09-24 03:06:33.888] Waiting data available... [2025-09-24 03:06:33.920] 512+0 records in [2025-09-24 03:06:33.920] 512+0 records out [2025-09-24 03:06:33.951] Starting syslogd/klogd: done [2025-09-24 03:06:33.968] DML Start [2025-09-24 03:06:34.160] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:06:34.400] DML res1: 0 [2025-09-24 03:06:34.791] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:06:34.791] Read Success [2025-09-24 03:06:34.791] Verifying certificate... [2025-09-24 03:06:35.030] Verified OK [2025-09-24 03:06:35.046] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:06:36.698] Verified OK [2025-09-24 03:06:36.698] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:06:37.330] Verified OK [2025-09-24 03:06:37.330] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:06:39.888] fs.protected_hardlinks = 1 [2025-09-24 03:06:39.904] fs.protected_symlinks = 1 [2025-09-24 03:06:39.904] kernel.modules_disabled = 1 [2025-09-24 03:06:40.096] [2025-09-24 03:06:40.096] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:06:41.407] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:06:49.204] SBL1:1210.0.1.0 [2025-09-24 03:06:49.252] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:06:50.818] SBL2:1210.0.1.0 [2025-09-24 03:06:50.866] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 03:06:50.979] j-A [2025-09-24 03:06:58.318] The R5 Autosar Classic is running [2025-09-24 03:06:58.349] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:06:58.349] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:06:58.957] INIT: version 2.96 booting [2025-09-24 03:06:59.069] INIT: Entering runlevel: 5 [2025-09-24 03:06:59.228] mtd28 attached [2025-09-24 03:06:59.244] mtd32 attached [2025-09-24 03:06:59.244] mtd24 attached [2025-09-24 03:06:59.292] RTNETLINK answers: File exists [2025-09-24 03:06:59.357] ubi0:animations is mounted. [2025-09-24 03:06:59.357] ubi2:textures is mounted. [2025-09-24 03:06:59.357] ubi1:dml_code is mounted. [2025-09-24 03:06:59.357] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:06:59.357] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:06:59.357] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:06:59.357] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:06:59.357] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:06:59.357] data.LB_FadeInType0=100 [2025-09-24 03:06:59.357] data.CHLH_FadeInType0=0 [2025-09-24 03:06:59.357] data.WU_FadeInDelay=0 [2025-09-24 03:06:59.357] max_time_out=0 [2025-09-24 03:06:59.357] No splash screen [2025-09-24 03:06:59.357] stop dss Done [2025-09-24 03:06:59.425] /dev/mem opened. [2025-09-24 03:06:59.425] Memory mapped at address 0xffff84e74000. [2025-09-24 03:06:59.425] Read at address 0x00600018 (0xffff84e74018): 0x00000000 [2025-09-24 03:06:59.425] Write at address 0x00600018 (0xffff84e74018): 0x00400040, readback 0x00400040 [2025-09-24 03:06:59.425] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:06:59.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:06:59.633] Loaded PowerVR consumer services. [2025-09-24 03:06:59.712] Waiting data available... [2025-09-24 03:06:59.728] 512+0 records in [2025-09-24 03:06:59.728] 512+0 records out [2025-09-24 03:06:59.776] Starting syslogd/klogd: done [2025-09-24 03:06:59.792] DML Start [2025-09-24 03:06:59.968] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:07:00.192] DML res1: 0 [2025-09-24 03:07:00.619] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:07:00.619] Read Success [2025-09-24 03:07:00.619] Verifying certificate... [2025-09-24 03:07:00.859] Verified OK [2025-09-24 03:07:00.874] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:07:02.565] Verified OK [2025-09-24 03:07:02.565] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:07:03.227] Verified OK [2025-09-24 03:07:03.227] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:07:05.753] fs.protected_hardlinks = 1 [2025-09-24 03:07:05.769] fs.protected_symlinks = 1 [2025-09-24 03:07:05.769] kernel.modules_disabled = 1 [2025-09-24 03:07:05.961] [2025-09-24 03:07:05.961] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:07:07.234] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:07:15.018] SBL1:1210.0.1.0 [2025-09-24 03:07:15.066] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:07:16.633] SBL2:1210.0.1.0 [2025-09-24 03:07:16.680] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:07:16.793] j-A [2025-09-24 03:07:24.165] The R5 Autosar Classic is running [2025-09-24 03:07:24.165] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:07:24.165] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:07:24.772] INIT: version 2.96 booting [2025-09-24 03:07:24.885] INIT: Entering runlevel: 5 [2025-09-24 03:07:25.028] mtd24 attached [2025-09-24 03:07:25.044] mtd32 attached [2025-09-24 03:07:25.060] mtd28 attached [2025-09-24 03:07:25.076] ubi0:textures is mounted. [2025-09-24 03:07:25.108] RTNETLINK answers: File exists [2025-09-24 03:07:25.168] ubi1:dml_code is mounted. [2025-09-24 03:07:25.168] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:07:25.168] ubi2:animations is mounted. [2025-09-24 03:07:25.168] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:07:25.168] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:07:25.168] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:07:25.168] data.LB_FadeInType0=100 [2025-09-24 03:07:25.168] data.CHLH_FadeInType0=0 [2025-09-24 03:07:25.168] data.WU_FadeInDelay=0 [2025-09-24 03:07:25.168] max_time_out=0 [2025-09-24 03:07:25.168] No splash screen [2025-09-24 03:07:25.168] stop dss Done [2025-09-24 03:07:25.168] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:07:25.237] /dev/mem opened. [2025-09-24 03:07:25.237] Memory mapped at address 0xffff999f4000. [2025-09-24 03:07:25.237] Read at address 0x00600018 (0xffff999f4018): 0x00000000 [2025-09-24 03:07:25.237] Write at address 0x00600018 (0xffff999f4018): 0x00400040, readback 0x00400040 [2025-09-24 03:07:25.237] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:07:25.237] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:07:25.493] Loaded PowerVR consumer services. [2025-09-24 03:07:25.509] Waiting data available... [2025-09-24 03:07:25.541] 512+0 records in [2025-09-24 03:07:25.541] 512+0 records out [2025-09-24 03:07:25.588] Starting syslogd/klogd: done [2025-09-24 03:07:25.604] DML Start [2025-09-24 03:07:25.780] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:07:26.020] DML res1: 0 [2025-09-24 03:07:26.442] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:07:26.442] Read Success [2025-09-24 03:07:26.442] Verifying certificate... [2025-09-24 03:07:26.666] Verified OK [2025-09-24 03:07:26.682] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:07:28.360] Verified OK [2025-09-24 03:07:28.360] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:07:28.958] Verified OK [2025-09-24 03:07:28.958] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:07:31.596] fs.protected_hardlinks = 1 [2025-09-24 03:07:31.596] fs.protected_symlinks = 1 [2025-09-24 03:07:31.612] kernel.modules_disabled = 1 [2025-09-24 03:07:31.804] [2025-09-24 03:07:31.804] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:07:33.019] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:07:40.835] SBL1:1210.0.1.0 [2025-09-24 03:07:40.867] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:07:42.450] SBL2:1210.0.1.0 [2025-09-24 03:07:42.498] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:07:42.594] j-A [2025-09-24 03:07:49.949] The R5 Autosar Classic is running [2025-09-24 03:07:49.971] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:07:49.971] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:07:50.579] INIT: version 2.96 booting [2025-09-24 03:07:50.690] INIT: Entering runlevel: 5 [2025-09-24 03:07:50.834] mtd24 attached [2025-09-24 03:07:50.850] mtd32 attached [2025-09-24 03:07:50.866] mtd28 attached [2025-09-24 03:07:50.882] ubi0:textures is mounted. [2025-09-24 03:07:50.914] RTNETLINK answers: File exists [2025-09-24 03:07:50.914] ubi1:dml_code is mounted. [2025-09-24 03:07:50.945] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:07:50.945] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:07:50.945] ubi2:animations is mounted. [2025-09-24 03:07:50.945] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:07:50.945] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:07:50.972] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:07:50.972] data.LB_FadeInType0=100 [2025-09-24 03:07:50.972] data.CHLH_FadeInType0=0 [2025-09-24 03:07:50.972] data.WU_FadeInDelay=0 [2025-09-24 03:07:50.972] max_time_out=0 [2025-09-24 03:07:50.972] No splash screen [2025-09-24 03:07:50.972] stop dss Done [2025-09-24 03:07:51.052] /dev/mem opened. [2025-09-24 03:07:51.052] Memory mapped at address 0xffff8b43a000. [2025-09-24 03:07:51.052] Read at address 0x00600018 (0xffff8b43a018): 0x00000000 [2025-09-24 03:07:51.052] Write at address 0x00600018 (0xffff8b43a018): 0x00400040, readback 0x00400040 [2025-09-24 03:07:51.052] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:07:51.052] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:07:51.132] Loaded PowerVR consumer services. [2025-09-24 03:07:51.323] Waiting data available... [2025-09-24 03:07:51.355] 512+0 records in [2025-09-24 03:07:51.355] 512+0 records out [2025-09-24 03:07:51.388] Starting syslogd/klogd: done [2025-09-24 03:07:51.404] DML Start [2025-09-24 03:07:51.595] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:07:51.819] DML res1: 0 [2025-09-24 03:07:52.220] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:07:52.235] Read Success [2025-09-24 03:07:52.235] Verifying certificate... [2025-09-24 03:07:52.507] Verified OK [2025-09-24 03:07:52.523] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:07:54.233] Verified OK [2025-09-24 03:07:54.233] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:07:54.793] Verified OK [2025-09-24 03:07:54.793] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:07:57.336] fs.protected_hardlinks = 1 [2025-09-24 03:07:57.364] fs.protected_symlinks = 1 [2025-09-24 03:07:57.364] kernel.modules_disabled = 1 [2025-09-24 03:07:57.555] [2025-09-24 03:07:57.555] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:07:58.818] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:08:06.603] SBL1:1210.0.1.0 [2025-09-24 03:08:06.635] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:08:08.217] SBL2:1210.0.1.0 [2025-09-24 03:08:08.265] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:08:08.361] j-A [2025-09-24 03:08:15.715] The R5 Autosar Classic is running [2025-09-24 03:08:15.715] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:08:15.736] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:08:16.343] INIT: version 2.96 booting [2025-09-24 03:08:16.439] INIT: Entering runlevel: 5 [2025-09-24 03:08:16.615] mtd24 attached [2025-09-24 03:08:16.615] mtd28 attached [2025-09-24 03:08:16.631] mtd32 attached [2025-09-24 03:08:16.714] RTNETLINK answers: File exists [2025-09-24 03:08:16.714] ubi0:textures is mounted. [2025-09-24 03:08:16.714] ubi1:animations is mounted. [2025-09-24 03:08:16.714] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:08:16.714] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:08:16.714] ubi2:dml_code is mounted. [2025-09-24 03:08:16.714] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:08:16.714] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:08:16.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:08:16.737] data.LB_FadeInType0=100 [2025-09-24 03:08:16.737] data.CHLH_FadeInType0=0 [2025-09-24 03:08:16.737] data.WU_FadeInDelay=0 [2025-09-24 03:08:16.737] max_time_out=0 [2025-09-24 03:08:16.737] No splash screen [2025-09-24 03:08:16.737] stop dss Done [2025-09-24 03:08:16.769] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:08:16.769] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:08:16.809] /dev/mem opened. [2025-09-24 03:08:16.809] Memory mapped at address 0xffffb45c6000. [2025-09-24 03:08:16.809] Read at address 0x00600018 (0xffffb45c6018): 0x00000000 [2025-09-24 03:08:16.809] Write at address 0x00600018 (0xffffb45c6018): 0x00400040, readback 0x00400040 [2025-09-24 03:08:17.065] Loaded PowerVR consumer services. [2025-09-24 03:08:17.065] Waiting data available... [2025-09-24 03:08:17.113] 512+0 records in [2025-09-24 03:08:17.113] 512+0 records out [2025-09-24 03:08:17.161] Starting syslogd/klogd: done [2025-09-24 03:08:17.177] DML Start [2025-09-24 03:08:17.352] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:08:17.592] DML res1: 0 [2025-09-24 03:08:17.957] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:08:17.957] Read Success [2025-09-24 03:08:17.957] Verifying certificate... [2025-09-24 03:08:18.197] Verified OK [2025-09-24 03:08:18.213] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:08:19.732] Verified OK [2025-09-24 03:08:19.732] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:08:20.414] Verified OK [2025-09-24 03:08:20.414] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:08:23.116] fs.protected_hardlinks = 1 [2025-09-24 03:08:23.116] fs.protected_symlinks = 1 [2025-09-24 03:08:23.132] kernel.modules_disabled = 1 [2025-09-24 03:08:23.324] [2025-09-24 03:08:23.324] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:08:24.616] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:08:32.450] SBL1:1210.0.1.0 [2025-09-24 03:08:32.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:08:34.065] SBL2:1210.0.1.0 [2025-09-24 03:08:34.096] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:08:34.209] j-A [2025-09-24 03:08:41.562] The R5 Autosar Classic is running [2025-09-24 03:08:41.583] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:08:41.583] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:08:42.191] INIT: version 2.96 booting [2025-09-24 03:08:42.302] INIT: Entering runlevel: 5 [2025-09-24 03:08:42.462] mtd32 attached [2025-09-24 03:08:42.462] mtd28 attached [2025-09-24 03:08:42.478] mtd24 attached [2025-09-24 03:08:42.577] ubi0:dml_code is mounted. [2025-09-24 03:08:42.577] RTNETLINK answers: File exists [2025-09-24 03:08:42.577] ubi1:animations is mounted. [2025-09-24 03:08:42.577] ubi2:textures is mounted. [2025-09-24 03:08:42.577] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:08:42.577] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:08:42.577] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:08:42.577] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:08:42.577] data.LB_FadeInType0=100 [2025-09-24 03:08:42.577] data.CHLH_FadeInType0=0 [2025-09-24 03:08:42.577] data.WU_FadeInDelay=0 [2025-09-24 03:08:42.577] max_time_out=0 [2025-09-24 03:08:42.577] No splash screen [2025-09-24 03:08:42.577] stop dss Done [2025-09-24 03:08:42.577] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:08:42.656] /dev/mem opened. [2025-09-24 03:08:42.656] Memory mapped at address 0xffff99f88000. [2025-09-24 03:08:42.656] Read at address 0x00600018 (0xffff99f88018): 0x00000000 [2025-09-24 03:08:42.656] Write at address 0x00600018 (0xffff99f88018): 0x00400040, readback 0x00400040 [2025-09-24 03:08:42.656] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:08:42.678] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:08:42.790] Loaded PowerVR consumer services. [2025-09-24 03:08:42.934] Waiting data available... [2025-09-24 03:08:42.965] 512+0 records in [2025-09-24 03:08:42.966] 512+0 records out [2025-09-24 03:08:42.981] Starting syslogd/klogd: done [2025-09-24 03:08:42.997] DML Start [2025-09-24 03:08:43.158] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:08:43.398] DML res1: 0 [2025-09-24 03:08:43.841] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:08:43.841] Read Success [2025-09-24 03:08:43.841] Verifying certificate... [2025-09-24 03:08:44.064] Verified OK [2025-09-24 03:08:44.080] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:08:45.647] Verified OK [2025-09-24 03:08:45.647] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:08:46.302] Verified OK [2025-09-24 03:08:46.302] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:08:49.004] fs.protected_hardlinks = 1 [2025-09-24 03:08:49.004] fs.protected_symlinks = 1 [2025-09-24 03:08:49.020] kernel.modules_disabled = 1 [2025-09-24 03:08:49.211] [2025-09-24 03:08:49.211] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:08:50.425] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:08:58.242] SBL1:1210.0.1.0 [2025-09-24 03:08:58.274] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:08:59.856] SBL2:1210.0.1.0 [2025-09-24 03:08:59.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:09:00.000] j-A [2025-09-24 03:09:07.353] The R5 Autosar Classic is running [2025-09-24 03:09:07.376] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:09:07.376] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:09:07.984] INIT: version 2.96 booting [2025-09-24 03:09:08.096] INIT: Entering runlevel: 5 [2025-09-24 03:09:08.256] mtd28 attached [2025-09-24 03:09:08.271] mtd24 attached [2025-09-24 03:09:08.287] mtd32 attached [2025-09-24 03:09:08.303] ubi0:animations is mounted. [2025-09-24 03:09:08.335] RTNETLINK answers: File exists [2025-09-24 03:09:08.335] ubi2:dml_code is mounted. [2025-09-24 03:09:08.335] ubi1:textures is mounted. [2025-09-24 03:09:08.386] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:09:08.386] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:09:08.386] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:09:08.386] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:09:08.386] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:09:08.386] data.LB_FadeInType0=100 [2025-09-24 03:09:08.386] data.CHLH_FadeInType0=0 [2025-09-24 03:09:08.386] data.WU_FadeInDelay=0 [2025-09-24 03:09:08.386] max_time_out=0 [2025-09-24 03:09:08.386] No splash screen [2025-09-24 03:09:08.386] stop dss Done [2025-09-24 03:09:08.434] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:09:08.434] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:09:08.466] /dev/mem opened. [2025-09-24 03:09:08.466] Memory mapped at address 0xffffa3f41000. [2025-09-24 03:09:08.466] Read at address 0x00600018 (0xffffa3f41018): 0x00000000 [2025-09-24 03:09:08.466] Write at address 0x00600018 (0xffffa3f41018): 0x00400040, readback 0x00400040 [2025-09-24 03:09:08.642] Loaded PowerVR consumer services. [2025-09-24 03:09:08.754] Waiting data available... [2025-09-24 03:09:08.770] 512+0 records in [2025-09-24 03:09:08.770] 512+0 records out [2025-09-24 03:09:08.802] Starting syslogd/klogd: done [2025-09-24 03:09:08.818] DML Start [2025-09-24 03:09:09.009] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:09:09.217] DML res1: 0 [2025-09-24 03:09:09.642] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:09:09.642] Read Success [2025-09-24 03:09:09.642] Verifying certificate... [2025-09-24 03:09:09.865] Verified OK [2025-09-24 03:09:09.881] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:09:11.522] Verified OK [2025-09-24 03:09:11.522] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:09:12.160] Verified OK [2025-09-24 03:09:12.160] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:09:14.846] fs.protected_hardlinks = 1 [2025-09-24 03:09:14.846] fs.protected_symlinks = 1 [2025-09-24 03:09:14.863] kernel.modules_disabled = 1 [2025-09-24 03:09:15.054] [2025-09-24 03:09:15.054] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:09:16.235] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:09:24.044] SBL1:1210.0.1.0 [2025-09-24 03:09:24.092] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:09:25.660] SBL2:1210.0.1.0 [2025-09-24 03:09:25.707] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:09:25.803] j-A [2025-09-24 03:09:33.157] The R5 Autosar Classic is running [2025-09-24 03:09:33.182] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:09:33.182] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:09:33.789] INIT: version 2.96 booting [2025-09-24 03:09:33.901] INIT: Entering runlevel: 5 [2025-09-24 03:09:34.061] mtd28 attached [2025-09-24 03:09:34.061] mtd24 attached [2025-09-24 03:09:34.077] mtd32 attached [2025-09-24 03:09:34.125] ubi0:animations is mounted. [2025-09-24 03:09:34.125] RTNETLINK answers: File exists [2025-09-24 03:09:34.165] ubi1:textures is mounted. [2025-09-24 03:09:34.165] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:09:34.165] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:09:34.165] ubi2:dml_code is mounted. [2025-09-24 03:09:34.165] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:09:34.165] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:09:34.165] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:09:34.186] data.LB_FadeInType0=100 [2025-09-24 03:09:34.186] data.CHLH_FadeInType0=0 [2025-09-24 03:09:34.186] data.WU_FadeInDelay=0 [2025-09-24 03:09:34.186] max_time_out=0 [2025-09-24 03:09:34.186] No splash screen [2025-09-24 03:09:34.186] stop dss Done [2025-09-24 03:09:34.253] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:09:34.253] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:09:34.253] /dev/mem opened. [2025-09-24 03:09:34.253] Memory mapped at address 0xffffacab4000. [2025-09-24 03:09:34.253] Read at address 0x00600018 (0xffffacab4018): 0x00000000 [2025-09-24 03:09:34.253] Write at address 0x00600018 (0xffffacab4018): 0x00400040, readback 0x00400040 [2025-09-24 03:09:34.445] Loaded PowerVR consumer services. [2025-09-24 03:09:34.556] Waiting data available... [2025-09-24 03:09:34.588] 512+0 records in [2025-09-24 03:09:34.588] 512+0 records out [2025-09-24 03:09:34.620] Starting syslogd/klogd: done [2025-09-24 03:09:34.636] DML Start [2025-09-24 03:09:34.781] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:09:35.004] DML res1: 0 [2025-09-24 03:09:35.448] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:09:35.448] Read Success [2025-09-24 03:09:35.448] Verifying certificate... [2025-09-24 03:09:35.704] Verified OK [2025-09-24 03:09:35.720] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:09:37.419] Verified OK [2025-09-24 03:09:37.419] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:09:38.020] Verified OK [2025-09-24 03:09:38.020] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:09:40.643] fs.protected_hardlinks = 1 [2025-09-24 03:09:40.643] fs.protected_symlinks = 1 [2025-09-24 03:09:40.658] kernel.modules_disabled = 1 [2025-09-24 03:09:40.834] [2025-09-24 03:09:40.834] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:09:42.078] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:09:49.827] SBL1:1210.0.1.0 [2025-09-24 03:09:49.875] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:09:51.441] SBL2:1210.0.1.0 [2025-09-24 03:09:51.489] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:09:51.602] j-A [2025-09-24 03:09:58.974] The R5 Autosar Classic is running [2025-09-24 03:09:58.974] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:09:58.974] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:09:59.582] INIT: version 2.96 booting [2025-09-24 03:09:59.677] INIT: Entering runlevel: 5 [2025-09-24 03:09:59.838] mtd32 attached [2025-09-24 03:09:59.854] mtd28 attached [2025-09-24 03:09:59.854] mtd24 attached [2025-09-24 03:09:59.902] RTNETLINK answers: File exists [2025-09-24 03:09:59.953] ubi0:dml_code is mounted. [2025-09-24 03:09:59.953] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:09:59.953] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:09:59.953] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:09:59.953] ubi2:textures is mounted. [2025-09-24 03:09:59.953] ubi1:animations is mounted. [2025-09-24 03:09:59.953] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:09:59.953] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:09:59.978] data.LB_FadeInType0=100 [2025-09-24 03:09:59.978] data.CHLH_FadeInType0=0 [2025-09-24 03:09:59.978] data.WU_FadeInDelay=0 [2025-09-24 03:09:59.978] max_time_out=0 [2025-09-24 03:09:59.978] No splash screen [2025-09-24 03:09:59.978] stop dss Done [2025-09-24 03:10:00.068] /dev/mem opened. [2025-09-24 03:10:00.068] Memory mapped at address 0xffff8f554000. [2025-09-24 03:10:00.068] Read at address 0x00600018 (0xffff8f554018): 0x00000000 [2025-09-24 03:10:00.068] Write at address 0x00600018 (0xffff8f554018): 0x00400040, readback 0x00400040 [2025-09-24 03:10:00.068] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:10:00.068] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:10:00.276] Loaded PowerVR consumer services. [2025-09-24 03:10:00.357] Waiting data available... [2025-09-24 03:10:00.388] 512+0 records in [2025-09-24 03:10:00.388] 512+0 records out [2025-09-24 03:10:00.404] Starting syslogd/klogd: done [2025-09-24 03:10:00.420] DML Start [2025-09-24 03:10:00.564] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:10:00.787] DML res1: 0 [2025-09-24 03:10:01.283] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:10:01.299] Read Success [2025-09-24 03:10:01.299] Verifying certificate... [2025-09-24 03:10:01.539] Verified OK [2025-09-24 03:10:01.555] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:10:03.278] Verified OK [2025-09-24 03:10:03.278] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:10:03.787] Verified OK [2025-09-24 03:10:03.787] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:10:06.249] fs.protected_hardlinks = 1 [2025-09-24 03:10:06.249] fs.protected_symlinks = 1 [2025-09-24 03:10:06.265] kernel.modules_disabled = 1 [2025-09-24 03:10:06.457] [2025-09-24 03:10:06.457] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:10:07.856] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:10:15.629] SBL1:1210.0.1.0 [2025-09-24 03:10:15.677] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:10:17.244] SBL2:1210.0.1.0 [2025-09-24 03:10:17.292] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:10:17.404] j-A [2025-09-24 03:10:24.776] The R5 Autosar Classic is running [2025-09-24 03:10:24.776] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:10:24.776] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:10:25.383] INIT: version 2.96 booting [2025-09-24 03:10:25.496] INIT: Entering runlevel: 5 [2025-09-24 03:10:25.656] mtd28 attached [2025-09-24 03:10:25.656] mtd24 attached [2025-09-24 03:10:25.672] mtd32 attached [2025-09-24 03:10:25.720] RTNETLINK answers: File exists [2025-09-24 03:10:25.761] ubi0:animations is mounted. [2025-09-24 03:10:25.761] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:10:25.761] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:10:25.761] ubi2:dml_code is mounted. [2025-09-24 03:10:25.761] ubi1:textures is mounted. [2025-09-24 03:10:25.761] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:10:25.761] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:10:25.761] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:10:25.786] data.LB_FadeInType0=100 [2025-09-24 03:10:25.786] data.CHLH_FadeInType0=0 [2025-09-24 03:10:25.786] data.WU_FadeInDelay=0 [2025-09-24 03:10:25.786] max_time_out=0 [2025-09-24 03:10:25.786] No splash screen [2025-09-24 03:10:25.786] stop dss Done [2025-09-24 03:10:25.818] /dev/mem opened. [2025-09-24 03:10:25.818] Memory mapped at address 0xffffa2df3000. [2025-09-24 03:10:25.844] Read at address 0x00600018 (0xffffa2df3018): 0x00000000 [2025-09-24 03:10:25.844] Write at address 0x00600018 (0xffffa2df3018): 0x00400040, readback 0x00400040 [2025-09-24 03:10:25.876] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:10:25.892] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:10:26.052] Loaded PowerVR consumer services. [2025-09-24 03:10:26.148] Waiting data available... [2025-09-24 03:10:26.164] 512+0 records in [2025-09-24 03:10:26.164] 512+0 records out [2025-09-24 03:10:26.212] Starting syslogd/klogd: done [2025-09-24 03:10:26.228] DML Start [2025-09-24 03:10:26.372] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:10:26.596] DML res1: 0 [2025-09-24 03:10:27.091] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:10:27.091] Read Success [2025-09-24 03:10:27.091] Verifying certificate... [2025-09-24 03:10:27.314] Verified OK [2025-09-24 03:10:27.330] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:10:29.073] Verified OK [2025-09-24 03:10:29.073] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:10:29.734] Verified OK [2025-09-24 03:10:29.734] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:10:32.324] fs.protected_hardlinks = 1 [2025-09-24 03:10:32.324] fs.protected_symlinks = 1 [2025-09-24 03:10:32.340] kernel.modules_disabled = 1 [2025-09-24 03:10:32.532] [2025-09-24 03:10:32.532] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:10:33.683] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:10:41.453] SBL1:1210.0.1.0 [2025-09-24 03:10:41.485] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:10:43.069] SBL2:1210.0.1.0 [2025-09-24 03:10:43.100] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:10:43.212] j-A [2025-09-24 03:10:50.587] The R5 Autosar Classic is running [2025-09-24 03:10:50.587] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:10:50.587] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:10:51.195] INIT: version 2.96 booting [2025-09-24 03:10:51.307] INIT: Entering runlevel: 5 [2025-09-24 03:10:51.450] mtd24 attached [2025-09-24 03:10:51.466] mtd28 attached [2025-09-24 03:10:51.482] mtd32 attached [2025-09-24 03:10:51.590] ubi0:textures is mounted. [2025-09-24 03:10:51.590] RTNETLINK answers: File exists [2025-09-24 03:10:51.590] ubi1:animations is mounted. [2025-09-24 03:10:51.590] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:10:51.590] ubi2:dml_code is mounted. [2025-09-24 03:10:51.590] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:10:51.590] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:10:51.590] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:10:51.590] data.LB_FadeInType0=100 [2025-09-24 03:10:51.590] data.CHLH_FadeInType0=0 [2025-09-24 03:10:51.590] data.WU_FadeInDelay=0 [2025-09-24 03:10:51.590] max_time_out=0 [2025-09-24 03:10:51.590] No splash screen [2025-09-24 03:10:51.590] stop dss Done [2025-09-24 03:10:51.590] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:10:51.646] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:10:51.646] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:10:51.646] /dev/mem opened. [2025-09-24 03:10:51.646] Memory mapped at address 0xffff9ff60000. [2025-09-24 03:10:51.672] Read at address 0x00600018 (0xffff9ff60018): 0x00000000 [2025-09-24 03:10:51.672] Write at address 0x00600018 (0xffff9ff60018): 0x00400040, readback 0x00400040 [2025-09-24 03:10:51.911] Loaded PowerVR consumer services. [2025-09-24 03:10:51.927] Waiting data available... [2025-09-24 03:10:51.959] 512+0 records in [2025-09-24 03:10:51.959] 512+0 records out [2025-09-24 03:10:52.007] Starting syslogd/klogd: done [2025-09-24 03:10:52.024] DML Start [2025-09-24 03:10:52.231] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:10:52.439] DML res1: 0 [2025-09-24 03:10:52.914] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:10:52.914] Read Success [2025-09-24 03:10:52.914] Verifying certificate... [2025-09-24 03:10:53.138] Verified OK [2025-09-24 03:10:53.169] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:10:54.961] Verified OK [2025-09-24 03:10:54.961] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:10:55.461] Verified OK [2025-09-24 03:10:55.461] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:10:57.748] fs.protected_hardlinks = 1 [2025-09-24 03:10:57.764] fs.protected_symlinks = 1 [2025-09-24 03:10:57.764] kernel.modules_disabled = 1 [2025-09-24 03:10:57.971] [2025-09-24 03:10:57.971] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:10:59.469] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:11:07.229] SBL1:1210.0.1.0 [2025-09-24 03:11:07.277] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:11:08.844] SBL2:1210.0.1.0 [2025-09-24 03:11:08.892] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:11:09.003] j-A [2025-09-24 03:11:16.343] The R5 Autosar Classic is running [2025-09-24 03:11:16.368] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:11:16.368] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:11:16.976] INIT: version 2.96 booting [2025-09-24 03:11:17.087] INIT: Entering runlevel: 5 [2025-09-24 03:11:17.247] mtd28 attached [2025-09-24 03:11:17.247] mtd24 attached [2025-09-24 03:11:17.263] mtd32 attached [2025-09-24 03:11:17.379] RTNETLINK answers: File exists [2025-09-24 03:11:17.379] ubi2:dml_code is mounted. [2025-09-24 03:11:17.379] ubi0:animations is mounted. [2025-09-24 03:11:17.379] ubi1:textures is mounted. [2025-09-24 03:11:17.379] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:11:17.379] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:11:17.379] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:11:17.379] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:11:17.379] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:11:17.379] data.LB_FadeInType0=100 [2025-09-24 03:11:17.379] data.CHLH_FadeInType0=0 [2025-09-24 03:11:17.379] data.WU_FadeInDelay=0 [2025-09-24 03:11:17.379] max_time_out=0 [2025-09-24 03:11:17.379] No splash screen [2025-09-24 03:11:17.379] stop dss Done [2025-09-24 03:11:17.395] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:11:17.423] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:11:17.456] /dev/mem opened. [2025-09-24 03:11:17.456] Memory mapped at address 0xffff88d96000. [2025-09-24 03:11:17.456] Read at address 0x00600018 (0xffff88d96018): 0x00000000 [2025-09-24 03:11:17.456] Write at address 0x00600018 (0xffff88d96018): 0x00400040, readback 0x00400040 [2025-09-24 03:11:17.664] Loaded PowerVR consumer services. [2025-09-24 03:11:17.775] Waiting data available... [2025-09-24 03:11:17.791] 512+0 records in [2025-09-24 03:11:17.791] 512+0 records out [2025-09-24 03:11:17.824] Starting syslogd/klogd: done [2025-09-24 03:11:17.839] DML Start [2025-09-24 03:11:17.983] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:11:18.191] DML res1: 0 [2025-09-24 03:11:18.718] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:11:18.718] Read Success [2025-09-24 03:11:18.718] Verifying certificate... [2025-09-24 03:11:18.942] Verified OK [2025-09-24 03:11:18.958] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:11:20.633] Verified OK [2025-09-24 03:11:20.633] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:11:21.252] Verified OK [2025-09-24 03:11:21.252] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:11:23.747] fs.protected_hardlinks = 1 [2025-09-24 03:11:23.747] fs.protected_symlinks = 1 [2025-09-24 03:11:23.763] kernel.modules_disabled = 1 [2025-09-24 03:11:23.954] [2025-09-24 03:11:23.954] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:11:25.249] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:11:33.024] SBL1:1210.0.1.0 [2025-09-24 03:11:33.056] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:11:34.638] SBL2:1210.0.1.0 [2025-09-24 03:11:34.686] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:11:34.782] j-A [2025-09-24 03:11:42.138] The R5 Autosar Classic is running [2025-09-24 03:11:42.138] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:11:42.159] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:11:42.767] INIT: version 2.96 booting [2025-09-24 03:11:42.879] INIT: Entering runlevel: 5 [2025-09-24 03:11:43.038] mtd28 attached [2025-09-24 03:11:43.038] mtd32 attached [2025-09-24 03:11:43.054] mtd24 attached [2025-09-24 03:11:43.086] ubi0:animations is mounted. [2025-09-24 03:11:43.102] RTNETLINK answers: File exists [2025-09-24 03:11:43.102] ubi1:dml_code is mounted. [2025-09-24 03:11:43.141] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:11:43.141] ubi2:textures is mounted. [2025-09-24 03:11:43.141] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:11:43.141] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:11:43.141] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:11:43.141] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:11:43.165] data.LB_FadeInType0=100 [2025-09-24 03:11:43.165] data.CHLH_FadeInType0=0 [2025-09-24 03:11:43.165] data.WU_FadeInDelay=0 [2025-09-24 03:11:43.165] max_time_out=0 [2025-09-24 03:11:43.165] No splash screen [2025-09-24 03:11:43.165] stop dss Done [2025-09-24 03:11:43.197] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:11:43.213] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:11:43.252] /dev/mem opened. [2025-09-24 03:11:43.252] Memory mapped at address 0xffff8fc14000. [2025-09-24 03:11:43.252] Read at address 0x00600018 (0xffff8fc14018): 0x00000000 [2025-09-24 03:11:43.252] Write at address 0x00600018 (0xffff8fc14018): 0x00400040, readback 0x00400040 [2025-09-24 03:11:43.348] Loaded PowerVR consumer services. [2025-09-24 03:11:43.524] Waiting data available... [2025-09-24 03:11:43.541] 512+0 records in [2025-09-24 03:11:43.541] 512+0 records out [2025-09-24 03:11:43.588] Starting syslogd/klogd: done [2025-09-24 03:11:43.588] DML Start [2025-09-24 03:11:43.764] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:11:44.020] DML res1: 0 [2025-09-24 03:11:44.413] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:11:44.413] Read Success [2025-09-24 03:11:44.413] Verifying certificate... [2025-09-24 03:11:44.652] Verified OK [2025-09-24 03:11:44.668] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:11:46.316] Verified OK [2025-09-24 03:11:46.316] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:11:46.892] Verified OK [2025-09-24 03:11:46.892] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:11:47.707] 5458 GC [0] [2025-09-24 03:11:47.771] 5519 GC [1] [2025-09-24 03:11:47.835] 5597 GC [2] [2025-09-24 03:11:47.915] 5670 GC [3] [2025-09-24 03:11:47.979] 5731 GC [4] [2025-09-24 03:11:48.043] 5808 GC [5] [2025-09-24 03:11:48.107] 5861 GC [6] [2025-09-24 03:11:48.187] 5937 GC [7] [2025-09-24 03:11:48.251] 6010 GC [8] [2025-09-24 03:11:48.330] 6077 GC [9] [2025-09-24 03:11:48.395] 6148 GC [10] [2025-09-24 03:11:48.458] 6217 GC [11] [2025-09-24 03:11:48.523] 6281 GC [12] [2025-09-24 03:11:48.587] 6347 GC [13] [2025-09-24 03:11:48.635] 6399 GC [14] [2025-09-24 03:11:48.698] 6457 GC [15] [2025-09-24 03:11:48.762] 6518 GC [16] [2025-09-24 03:11:48.826] 6591 GC [17] [2025-09-24 03:11:48.891] 6647 GC [18] [2025-09-24 03:11:48.938] 6699 GC [19] [2025-09-24 03:11:49.002] 6762 GC [20] [2025-09-24 03:11:49.066] 6818 GC [21] [2025-09-24 03:11:49.114] 6881 GC [22] [2025-09-24 03:11:49.178] 6937 GC [23] [2025-09-24 03:11:49.226] 6989 GC [24] [2025-09-24 03:11:49.306] 7057 GC [25] [2025-09-24 03:11:49.354] 7118 GC [26] [2025-09-24 03:11:49.418] 7170 GC [27] [2025-09-24 03:11:49.498] 7247 GC [28] [2025-09-24 03:11:49.561] fs.protected_hardlinks = 1 [2025-09-24 03:11:49.561] fs.protected_symlinks = 1 [2025-09-24 03:11:49.561] kernel.modules_disabled = 1 [2025-09-24 03:11:49.561] 7321 GC [29] [2025-09-24 03:11:49.561] GC DONE [2025-09-24 03:11:49.736] [2025-09-24 03:11:49.736] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:11:50.991] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:11:58.846] SBL1:1210.0.1.0 [2025-09-24 03:11:58.878] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:12:00.461] SBL2:1210.0.1.0 [2025-09-24 03:12:00.493] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 03:12:00.589] j-A [2025-09-24 03:12:07.943] The R5 Autosar Classic is running [2025-09-24 03:12:07.968] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:12:07.968] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:12:08.576] INIT: version 2.96 booting [2025-09-24 03:12:08.687] INIT: Entering runlevel: 5 [2025-09-24 03:12:08.832] mtd28 attached [2025-09-24 03:12:08.848] mtd24 attached [2025-09-24 03:12:08.864] mtd32 attached [2025-09-24 03:12:08.895] RTNETLINK answers: File exists [2025-09-24 03:12:08.943] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:12:08.943] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:12:08.943] ubi1:textures is mounted. [2025-09-24 03:12:08.943] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:12:08.943] ubi0:animations is mounted. [2025-09-24 03:12:08.943] ubi2:dml_code is mounted. [2025-09-24 03:12:08.943] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:12:08.943] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:12:08.971] data.LB_FadeInType0=100 [2025-09-24 03:12:08.971] data.CHLH_FadeInType0=0 [2025-09-24 03:12:08.971] data.WU_FadeInDelay=0 [2025-09-24 03:12:08.971] max_time_out=0 [2025-09-24 03:12:08.971] No splash screen [2025-09-24 03:12:08.971] stop dss Done [2025-09-24 03:12:08.987] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:12:09.009] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:12:09.009] /dev/mem opened. [2025-09-24 03:12:09.035] Memory mapped at address 0xffff80e10000. [2025-09-24 03:12:09.035] Read at address 0x00600018 (0xffff80e10018): 0x00000000 [2025-09-24 03:12:09.035] Write at address 0x00600018 (0xffff80e10018): 0x00400040, readback 0x00400040 [2025-09-24 03:12:09.131] Loaded PowerVR consumer services. [2025-09-24 03:12:09.260] 512+0 records in [2025-09-24 03:12:09.260] 512+0 records out [2025-09-24 03:12:09.292] Waiting data available... [2025-09-24 03:12:09.307] Starting syslogd/klogd: done [2025-09-24 03:12:09.323] DML Start [2025-09-24 03:12:09.515] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:12:09.723] DML res1: 0 [2025-09-24 03:12:10.187] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:12:10.212] Read Success [2025-09-24 03:12:10.212] Verifying certificate... [2025-09-24 03:12:10.468] Verified OK [2025-09-24 03:12:10.484] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:12:12.158] Verified OK [2025-09-24 03:12:12.158] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:12:12.676] Verified OK [2025-09-24 03:12:12.676] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:12:15.427] fs.protected_hardlinks = 1 [2025-09-24 03:12:15.427] fs.protected_symlinks = 1 [2025-09-24 03:12:15.443] kernel.modules_disabled = 1 [2025-09-24 03:12:15.635] [2025-09-24 03:12:15.635] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:12:16.848] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:12:24.634] SBL1:1210.0.1.0 [2025-09-24 03:12:24.665] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:12:26.248] SBL2:1210.0.1.0 [2025-09-24 03:12:26.280] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 03:12:26.391] j-A [2025-09-24 03:12:33.729] The R5 Autosar Classic is running [2025-09-24 03:12:33.760] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:12:33.760] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:12:34.368] INIT: version 2.96 booting [2025-09-24 03:12:34.480] INIT: Entering runlevel: 5 [2025-09-24 03:12:34.640] mtd32 attached [2025-09-24 03:12:34.640] mtd24 attached [2025-09-24 03:12:34.656] mtd28 attached [2025-09-24 03:12:34.688] ubi0:dml_code is mounted. [2025-09-24 03:12:34.704] RTNETLINK answers: File exists [2025-09-24 03:12:34.704] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:12:34.740] ubi1:textures is mounted. [2025-09-24 03:12:34.741] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:12:34.741] ubi2:animations is mounted. [2025-09-24 03:12:34.741] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:12:34.741] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:12:34.741] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:12:34.741] data.LB_FadeInType0=100 [2025-09-24 03:12:34.761] data.CHLH_FadeInType0=0 [2025-09-24 03:12:34.761] data.WU_FadeInDelay=0 [2025-09-24 03:12:34.761] max_time_out=0 [2025-09-24 03:12:34.761] No splash screen [2025-09-24 03:12:34.761] stop dss Done [2025-09-24 03:12:34.777] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:12:34.793] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:12:34.843] /dev/mem opened. [2025-09-24 03:12:34.843] Memory mapped at address 0xffff83ac7000. [2025-09-24 03:12:34.843] Read at address 0x00600018 (0xffff83ac7018): 0x00000000 [2025-09-24 03:12:34.843] Write at address 0x00600018 (0xffff83ac7018): 0x00400040, readback 0x00400040 [2025-09-24 03:12:34.908] Loaded PowerVR consumer services. [2025-09-24 03:12:35.066] 512+0 records in [2025-09-24 03:12:35.066] 512+0 records out [2025-09-24 03:12:35.066] Waiting data available... [2025-09-24 03:12:35.098] Starting syslogd/klogd: done [2025-09-24 03:12:35.114] DML Start [2025-09-24 03:12:35.306] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:12:35.530] DML res1: 0 [2025-09-24 03:12:35.994] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:12:36.015] Read Success [2025-09-24 03:12:36.015] Verifying certificate... [2025-09-24 03:12:36.223] Verified OK [2025-09-24 03:12:36.239] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:12:37.931] Verified OK [2025-09-24 03:12:37.931] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:12:38.591] Verified OK [2025-09-24 03:12:38.591] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:12:41.118] fs.protected_hardlinks = 1 [2025-09-24 03:12:41.134] fs.protected_symlinks = 1 [2025-09-24 03:12:41.134] kernel.modules_disabled = 1 [2025-09-24 03:12:41.342] [2025-09-24 03:12:41.342] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:12:42.630] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:12:50.408] SBL1:1210.0.1.0 [2025-09-24 03:12:50.456] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:12:52.023] SBL2:1210.0.1.0 [2025-09-24 03:12:52.055] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:12:52.167] j-A [2025-09-24 03:12:59.542] The R5 Autosar Classic is running [2025-09-24 03:12:59.542] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:12:59.542] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:13:00.149] INIT: version 2.96 booting [2025-09-24 03:13:00.261] INIT: Entering runlevel: 5 [2025-09-24 03:13:00.405] mtd28 attached [2025-09-24 03:13:00.421] mtd24 attached [2025-09-24 03:13:00.437] mtd32 attached [2025-09-24 03:13:00.468] ubi0:animations is mounted. [2025-09-24 03:13:00.542] ubi1:textures is mounted. [2025-09-24 03:13:00.542] RTNETLINK answers: File exists [2025-09-24 03:13:00.542] ubi2:dml_code is mounted. [2025-09-24 03:13:00.542] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:13:00.542] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:13:00.542] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:13:00.542] data.LB_FadeInType0=100 [2025-09-24 03:13:00.542] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:13:00.542] data.CHLH_FadeInType0=0 [2025-09-24 03:13:00.542] data.WU_FadeInDelay=0 [2025-09-24 03:13:00.542] max_time_out=0 [2025-09-24 03:13:00.542] No splash screen [2025-09-24 03:13:00.542] stop dss Done [2025-09-24 03:13:00.542] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:13:00.574] /dev/mem opened. [2025-09-24 03:13:00.574] Memory mapped at address 0xffff8d5f5000. [2025-09-24 03:13:00.600] Read at address 0x00600018 (0xffff8d5f5018): 0x00000000 [2025-09-24 03:13:00.600] Write at address 0x00600018 (0xffff8d5f5018): 0x00400040, readback 0x00400040 [2025-09-24 03:13:00.632] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:13:00.648] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:13:00.791] Loaded PowerVR consumer services. [2025-09-24 03:13:00.839] 512+0 records in [2025-09-24 03:13:00.839] 512+0 records out [2025-09-24 03:13:00.855] Waiting data available... [2025-09-24 03:13:00.888] Starting syslogd/klogd: done [2025-09-24 03:13:00.904] DML Start [2025-09-24 03:13:01.079] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:13:01.336] DML res1: 0 [2025-09-24 03:13:01.733] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:13:01.733] Read Success [2025-09-24 03:13:01.733] Verifying certificate... [2025-09-24 03:13:01.957] Verified OK [2025-09-24 03:13:01.989] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:13:03.614] Verified OK [2025-09-24 03:13:03.614] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:13:04.269] Verified OK [2025-09-24 03:13:04.285] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:13:06.972] fs.protected_hardlinks = 1 [2025-09-24 03:13:06.988] fs.protected_symlinks = 1 [2025-09-24 03:13:06.988] kernel.modules_disabled = 1 [2025-09-24 03:13:07.179] [2025-09-24 03:13:07.179] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:13:08.426] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:13:16.218] SBL1:1210.0.1.0 [2025-09-24 03:13:16.250] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:13:17.833] SBL2:1210.0.1.0 [2025-09-24 03:13:17.865] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:13:17.961] j-A [2025-09-24 03:13:25.315] The R5 Autosar Classic is running [2025-09-24 03:13:25.338] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:13:25.338] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:13:25.947] INIT: version 2.96 booting [2025-09-24 03:13:26.058] INIT: Entering runlevel: 5 [2025-09-24 03:13:26.218] mtd28 attached [2025-09-24 03:13:26.233] mtd32 attached [2025-09-24 03:13:26.250] mtd24 attached [2025-09-24 03:13:26.266] ubi0:animations is mounted. [2025-09-24 03:13:26.298] RTNETLINK answers: File exists [2025-09-24 03:13:26.298] ubi1:dml_code is mounted. [2025-09-24 03:13:26.352] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:13:26.352] ubi2:textures is mounted. [2025-09-24 03:13:26.352] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:13:26.352] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:13:26.352] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:13:26.352] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:13:26.352] data.LB_FadeInType0=100 [2025-09-24 03:13:26.352] data.CHLH_FadeInType0=0 [2025-09-24 03:13:26.352] data.WU_FadeInDelay=0 [2025-09-24 03:13:26.352] max_time_out=0 [2025-09-24 03:13:26.352] No splash screen [2025-09-24 03:13:26.352] stop dss Done [2025-09-24 03:13:26.425] /dev/mem opened. [2025-09-24 03:13:26.425] Memory mapped at address 0xffffbd44f000. [2025-09-24 03:13:26.425] Read at address 0x00600018 (0xffffbd44f018): 0x00000000 [2025-09-24 03:13:26.425] Write at address 0x00600018 (0xffffbd44f018): 0x00400040, readback 0x00400040 [2025-09-24 03:13:26.425] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:13:26.441] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:13:26.601] Loaded PowerVR consumer services. [2025-09-24 03:13:26.617] 512+0 records in [2025-09-24 03:13:26.617] 512+0 records out [2025-09-24 03:13:26.649] Starting syslogd/klogd: done [2025-09-24 03:13:26.697] Waiting data available... [2025-09-24 03:13:26.713] DML Start [2025-09-24 03:13:26.857] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:13:27.064] DML res1: 0 [2025-09-24 03:13:27.600] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:13:27.600] Read Success [2025-09-24 03:13:27.600] Verifying certificate... [2025-09-24 03:13:27.823] Verified OK [2025-09-24 03:13:27.839] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:13:29.343] Verified OK [2025-09-24 03:13:29.343] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:13:30.023] Verified OK [2025-09-24 03:13:30.023] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:13:32.789] fs.protected_hardlinks = 1 [2025-09-24 03:13:32.789] fs.protected_symlinks = 1 [2025-09-24 03:13:32.805] kernel.modules_disabled = 1 [2025-09-24 03:13:32.997] [2025-09-24 03:13:32.997] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:13:34.164] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:13:41.991] SBL1:1210.0.1.0 [2025-09-24 03:13:42.039] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:13:43.605] SBL2:1210.0.1.0 [2025-09-24 03:13:43.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:13:43.749] j-A [2025-09-24 03:13:51.104] The R5 Autosar Classic is running [2025-09-24 03:13:51.104] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:13:51.125] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:13:51.732] INIT: version 2.96 booting [2025-09-24 03:13:51.843] INIT: Entering runlevel: 5 [2025-09-24 03:13:52.004] mtd32 attached [2025-09-24 03:13:52.004] mtd28 attached [2025-09-24 03:13:52.020] mtd24 attached [2025-09-24 03:13:52.068] RTNETLINK answers: File exists [2025-09-24 03:13:52.117] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:13:52.117] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:13:52.117] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:13:52.117] ubi1:animations is mounted. [2025-09-24 03:13:52.117] ubi0:dml_code is mounted. [2025-09-24 03:13:52.117] ubi2:textures is mounted. [2025-09-24 03:13:52.117] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:13:52.117] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:13:52.133] data.LB_FadeInType0=100 [2025-09-24 03:13:52.133] data.CHLH_FadeInType0=0 [2025-09-24 03:13:52.154] data.WU_FadeInDelay=0 [2025-09-24 03:13:52.154] max_time_out=0 [2025-09-24 03:13:52.154] No splash screen [2025-09-24 03:13:52.154] stop dss Done [2025-09-24 03:13:52.186] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:13:52.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:13:52.236] /dev/mem opened. [2025-09-24 03:13:52.236] Memory mapped at address 0xffffb171a000. [2025-09-24 03:13:52.236] Read at address 0x00600018 (0xffffb171a018): 0x00000000 [2025-09-24 03:13:52.236] Write at address 0x00600018 (0xffffb171a018): 0x00400040, readback 0x00400040 [2025-09-24 03:13:52.315] Loaded PowerVR consumer services. [2025-09-24 03:13:52.427] 512+0 records in [2025-09-24 03:13:52.427] 512+0 records out [2025-09-24 03:13:52.459] Starting syslogd/klogd: done [2025-09-24 03:13:52.475] Waiting data available... [2025-09-24 03:13:52.475] DML Start [2025-09-24 03:13:52.667] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:13:52.891] DML res1: 0 [2025-09-24 03:13:53.338] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:13:53.359] Read Success [2025-09-24 03:13:53.359] Verifying certificate... [2025-09-24 03:13:53.631] Verified OK [2025-09-24 03:13:53.647] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:13:55.282] Verified OK [2025-09-24 03:13:55.282] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:13:55.889] Verified OK [2025-09-24 03:13:55.889] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:13:58.623] fs.protected_hardlinks = 1 [2025-09-24 03:13:58.623] fs.protected_symlinks = 1 [2025-09-24 03:13:58.639] kernel.modules_disabled = 1 [2025-09-24 03:13:58.831] [2025-09-24 03:13:58.831] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:13:59.958] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:14:07.813] SBL1:1210.0.1.0 [2025-09-24 03:14:07.845] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:14:09.427] SBL2:1210.0.1.0 [2025-09-24 03:14:09.459] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:14:09.555] j-A [2025-09-24 03:14:16.910] The R5 Autosar Classic is running [2025-09-24 03:14:16.934] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:14:16.934] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:14:17.541] INIT: version 2.96 booting [2025-09-24 03:14:17.654] INIT: Entering runlevel: 5 [2025-09-24 03:14:17.813] mtd32 attached [2025-09-24 03:14:17.813] mtd24 attached [2025-09-24 03:14:17.829] mtd28 attached [2025-09-24 03:14:17.877] ubi0:dml_code is mounted. [2025-09-24 03:14:17.877] RTNETLINK answers: File exists [2025-09-24 03:14:17.943] ubi2:animations is mounted. [2025-09-24 03:14:17.943] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:14:17.943] ubi1:textures is mounted. [2025-09-24 03:14:17.943] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:14:17.943] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:14:17.943] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:14:17.943] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:14:17.943] data.LB_FadeInType0=100 [2025-09-24 03:14:17.943] data.CHLH_FadeInType0=0 [2025-09-24 03:14:17.943] data.WU_FadeInDelay=0 [2025-09-24 03:14:17.943] max_time_out=0 [2025-09-24 03:14:17.943] No splash screen [2025-09-24 03:14:17.943] stop dss Done [2025-09-24 03:14:17.976] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:14:18.015] /dev/mem opened. [2025-09-24 03:14:18.015] Memory mapped at address 0xffff8fde9000. [2025-09-24 03:14:18.015] Read at address 0x00600018 (0xffff8fde9018): 0x00000000 [2025-09-24 03:14:18.015] Write at address 0x00600018 (0xffff8fde9018): 0x00400040, readback 0x00400040 [2025-09-24 03:14:18.015] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:14:18.111] Loaded PowerVR consumer services. [2025-09-24 03:14:18.239] 512+0 records in [2025-09-24 03:14:18.239] 512+0 records out [2025-09-24 03:14:18.239] Waiting data available... [2025-09-24 03:14:18.287] Starting syslogd/klogd: done [2025-09-24 03:14:18.303] DML Start [2025-09-24 03:14:18.463] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:14:18.670] DML res1: 0 [2025-09-24 03:14:19.214] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:14:19.230] Read Success [2025-09-24 03:14:19.230] Verifying certificate... [2025-09-24 03:14:19.485] Verified OK [2025-09-24 03:14:19.517] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:14:21.260] Verified OK [2025-09-24 03:14:21.281] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:14:21.782] Verified OK [2025-09-24 03:14:21.782] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:14:24.213] fs.protected_hardlinks = 1 [2025-09-24 03:14:24.229] fs.protected_symlinks = 1 [2025-09-24 03:14:24.229] kernel.modules_disabled = 1 [2025-09-24 03:14:24.420] [2025-09-24 03:14:24.420] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:14:25.804] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:14:33.606] SBL1:1210.0.1.0 [2025-09-24 03:14:33.637] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:14:35.220] SBL2:1210.0.1.0 [2025-09-24 03:14:35.252] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:14:35.363] j-A [2025-09-24 03:14:42.704] The R5 Autosar Classic is running [2025-09-24 03:14:42.729] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:14:42.729] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:14:43.336] INIT: version 2.96 booting [2025-09-24 03:14:43.448] INIT: Entering runlevel: 5 [2025-09-24 03:14:43.608] mtd32 attached [2025-09-24 03:14:43.608] mtd28 attached [2025-09-24 03:14:43.624] mtd24 attached [2025-09-24 03:14:43.671] RTNETLINK answers: File exists [2025-09-24 03:14:43.671] ubi0:dml_code is mounted. [2025-09-24 03:14:43.733] ubi2:textures is mounted. [2025-09-24 03:14:43.733] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:14:43.733] ubi1:animations is mounted. [2025-09-24 03:14:43.733] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:14:43.733] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:14:43.733] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:14:43.733] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:14:43.733] data.LB_FadeInType0=100 [2025-09-24 03:14:43.733] data.CHLH_FadeInType0=0 [2025-09-24 03:14:43.733] data.WU_FadeInDelay=0 [2025-09-24 03:14:43.733] max_time_out=0 [2025-09-24 03:14:43.733] No splash screen [2025-09-24 03:14:43.733] stop dss Done [2025-09-24 03:14:43.809] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:14:43.809] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:14:43.809] /dev/mem opened. [2025-09-24 03:14:43.809] Memory mapped at address 0xffffa1296000. [2025-09-24 03:14:43.809] Read at address 0x00600018 (0xffffa1296018): 0x00000000 [2025-09-24 03:14:43.809] Write at address 0x00600018 (0xffffa1296018): 0x00400040, readback 0x00400040 [2025-09-24 03:14:43.905] Loaded PowerVR consumer services. [2025-09-24 03:14:44.048] Waiting data available... [2025-09-24 03:14:44.048] 512+0 records in [2025-09-24 03:14:44.048] 512+0 records out [2025-09-24 03:14:44.080] Starting syslogd/klogd: done [2025-09-24 03:14:44.096] DML Start [2025-09-24 03:14:44.288] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:14:44.496] DML res1: 0 [2025-09-24 03:14:44.974] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:14:44.974] Read Success [2025-09-24 03:14:44.974] Verifying certificate... [2025-09-24 03:14:45.197] Verified OK [2025-09-24 03:14:45.213] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:14:46.860] Verified OK [2025-09-24 03:14:46.882] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:14:47.580] Verified OK [2025-09-24 03:14:47.580] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:14:50.186] fs.protected_hardlinks = 1 [2025-09-24 03:14:50.186] fs.protected_symlinks = 1 [2025-09-24 03:14:50.202] kernel.modules_disabled = 1 [2025-09-24 03:14:50.393] [2025-09-24 03:14:50.393] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:14:51.682] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:14:59.405] SBL1:1210.0.1.0 [2025-09-24 03:14:59.437] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 03:15:01.020] SBL2:1210.0.1.0 [2025-09-24 03:15:01.051] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 03:15:01.164] j-A [2025-09-24 03:15:08.504] The R5 Autosar Classic is running [2025-09-24 03:15:08.529] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:15:08.529] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:15:09.136] INIT: version 2.96 booting [2025-09-24 03:15:09.248] INIT: Entering runlevel: 5 [2025-09-24 03:15:09.409] mtd24 attached [2025-09-24 03:15:09.425] mtd28 attached [2025-09-24 03:15:09.440] ubi0:textures is mounted. [2025-09-24 03:15:09.456] mtd32 attached [2025-09-24 03:15:09.472] ubi1:animations is mounted. [2025-09-24 03:15:09.535] RTNETLINK answers: File exists [2025-09-24 03:15:09.535] ubi2:dml_code is mounted. [2025-09-24 03:15:09.535] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:15:09.535] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:15:09.535] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:15:09.535] data.LB_FadeInType0=100 [2025-09-24 03:15:09.535] data.CHLH_FadeInType0=0 [2025-09-24 03:15:09.535] data.WU_FadeInDelay=0 [2025-09-24 03:15:09.535] max_time_out=0 [2025-09-24 03:15:09.535] No splash screen [2025-09-24 03:15:09.535] stop dss Done [2025-09-24 03:15:09.535] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:15:09.535] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:15:09.583] /dev/mem opened. [2025-09-24 03:15:09.583] Memory mapped at address 0xffff9bba9000. [2025-09-24 03:15:09.609] Read at address 0x00600018 (0xffff9bba9018): 0x00000000 [2025-09-24 03:15:09.609] Write at address 0x00600018 (0xffff9bba9018): 0x00400040, readback 0x00400040 [2025-09-24 03:15:09.640] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:15:09.640] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:15:09.704] Loaded PowerVR consumer services. [2025-09-24 03:15:09.832] 512+0 records in [2025-09-24 03:15:09.832] 512+0 records out [2025-09-24 03:15:09.848] Waiting data available... [2025-09-24 03:15:09.880] Starting syslogd/klogd: done [2025-09-24 03:15:09.896] DML Start [2025-09-24 03:15:10.072] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:15:10.328] DML res1: 0 [2025-09-24 03:15:10.766] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:15:10.766] Read Success [2025-09-24 03:15:10.766] Verifying certificate... [2025-09-24 03:15:11.021] Verified OK [2025-09-24 03:15:11.021] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:15:12.837] Verified OK [2025-09-24 03:15:12.837] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:15:13.364] Verified OK [2025-09-24 03:15:13.364] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:15:15.794] fs.protected_hardlinks = 1 [2025-09-24 03:15:15.811] fs.protected_symlinks = 1 [2025-09-24 03:15:15.811] kernel.modules_disabled = 1 [2025-09-24 03:15:16.002] [2025-09-24 03:15:16.002] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:15:17.400] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:15:25.196] SBL1:1210.0.1.0 [2025-09-24 03:15:25.228] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:15:26.811] SBL2:1210.0.1.0 [2025-09-24 03:15:26.843] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:15:26.939] j-A [2025-09-24 03:15:34.294] The R5 Autosar Classic is running [2025-09-24 03:15:34.316] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:15:34.316] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:15:34.924] INIT: version 2.96 booting [2025-09-24 03:15:35.035] INIT: Entering runlevel: 5 [2025-09-24 03:15:35.180] mtd24 attached [2025-09-24 03:15:35.196] mtd28 attached [2025-09-24 03:15:35.227] mtd32 attached [2025-09-24 03:15:35.259] ubi0:textures is mounted. [2025-09-24 03:15:35.259] ubi1:animations is mounted. [2025-09-24 03:15:35.322] RTNETLINK answers: File exists [2025-09-24 03:15:35.322] ubi2:dml_code is mounted. [2025-09-24 03:15:35.322] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:15:35.322] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:15:35.322] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:15:35.322] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:15:35.322] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:15:35.322] data.LB_FadeInType0=100 [2025-09-24 03:15:35.322] data.CHLH_FadeInType0=0 [2025-09-24 03:15:35.322] data.WU_FadeInDelay=0 [2025-09-24 03:15:35.322] max_time_out=0 [2025-09-24 03:15:35.322] No splash screen [2025-09-24 03:15:35.322] stop dss Done [2025-09-24 03:15:35.398] /dev/mem opened. [2025-09-24 03:15:35.398] Memory mapped at address 0xffff860c8000. [2025-09-24 03:15:35.398] Read at address 0x00600018 (0xffff860c8018): 0x00000000 [2025-09-24 03:15:35.398] Write at address 0x00600018 (0xffff860c8018): 0x00400040, readback 0x00400040 [2025-09-24 03:15:35.398] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:15:35.398] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:15:35.574] Loaded PowerVR consumer services. [2025-09-24 03:15:35.606] 512+0 records in [2025-09-24 03:15:35.606] 512+0 records out [2025-09-24 03:15:35.638] Waiting data available... [2025-09-24 03:15:35.654] Starting syslogd/klogd: done [2025-09-24 03:15:35.670] DML Start [2025-09-24 03:15:35.830] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:15:36.069] DML res1: 0 [2025-09-24 03:15:36.534] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:15:36.555] Read Success [2025-09-24 03:15:36.555] Verifying certificate... [2025-09-24 03:15:36.794] Verified OK [2025-09-24 03:15:36.810] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:15:38.472] Verified OK [2025-09-24 03:15:38.472] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:15:39.013] Verified OK [2025-09-24 03:15:39.013] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:15:41.683] fs.protected_hardlinks = 1 [2025-09-24 03:15:41.683] fs.protected_symlinks = 1 [2025-09-24 03:15:41.683] kernel.modules_disabled = 1 [2025-09-24 03:15:41.859] [2025-09-24 03:15:41.859] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:15:43.159] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:15:50.969] SBL1:1210.0.1.0 [2025-09-24 03:15:51.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:15:52.583] SBL2:1210.0.1.0 [2025-09-24 03:15:52.615] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 03:15:52.727] j-A [2025-09-24 03:16:00.100] The R5 Autosar Classic is running [2025-09-24 03:16:00.100] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:16:00.100] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:16:00.708] INIT: version 2.96 booting [2025-09-24 03:16:00.820] INIT: Entering runlevel: 5 [2025-09-24 03:16:00.980] mtd28 attached [2025-09-24 03:16:00.980] mtd24 attached [2025-09-24 03:16:00.995] mtd32 attached [2025-09-24 03:16:01.028] ubi0:animations is mounted. [2025-09-24 03:16:01.044] ubi2:dml_code is mounted. [2025-09-24 03:16:01.092] RTNETLINK answers: File exists [2025-09-24 03:16:01.092] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:16:01.092] ubi1:textures is mounted. [2025-09-24 03:16:01.092] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:16:01.092] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:16:01.092] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:16:01.092] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:16:01.092] data.LB_FadeInType0=100 [2025-09-24 03:16:01.092] data.CHLH_FadeInType0=0 [2025-09-24 03:16:01.092] data.WU_FadeInDelay=0 [2025-09-24 03:16:01.113] max_time_out=0 [2025-09-24 03:16:01.113] No splash screen [2025-09-24 03:16:01.113] stop dss Done [2025-09-24 03:16:01.145] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:16:01.189] /dev/mem opened. [2025-09-24 03:16:01.189] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:16:01.189] Memory mapped at address 0xffffb4b09000. [2025-09-24 03:16:01.189] Read at address 0x00600018 (0xffffb4b09018): 0x00000000 [2025-09-24 03:16:01.189] Write at address 0x00600018 (0xffffb4b09018): 0x00400040, readback 0x00400040 [2025-09-24 03:16:01.317] Loaded PowerVR consumer services. [2025-09-24 03:16:01.398] 512+0 records in [2025-09-24 03:16:01.398] 512+0 records out [2025-09-24 03:16:01.430] Waiting data available... [2025-09-24 03:16:01.430] Starting syslogd/klogd: done [2025-09-24 03:16:01.446] DML Start [2025-09-24 03:16:01.653] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:16:01.877] DML res1: 0 [2025-09-24 03:16:02.324] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:16:02.345] Read Success [2025-09-24 03:16:02.345] Verifying certificate... [2025-09-24 03:16:02.602] Verified OK [2025-09-24 03:16:02.618] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:16:04.329] Verified OK [2025-09-24 03:16:04.329] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:16:04.957] Verified OK [2025-09-24 03:16:04.957] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:16:07.500] fs.protected_hardlinks = 1 [2025-09-24 03:16:07.500] fs.protected_symlinks = 1 [2025-09-24 03:16:07.516] kernel.modules_disabled = 1 [2025-09-24 03:16:07.708] [2025-09-24 03:16:07.708] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:16:08.933] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:16:16.777] SBL1:1210.0.1.0 [2025-09-24 03:16:16.825] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:16:18.391] SBL2:1210.0.1.0 [2025-09-24 03:16:18.423] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:16:18.536] j-A [2025-09-24 03:16:25.908] The R5 Autosar Classic is running [2025-09-24 03:16:25.908] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:16:25.908] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:16:26.515] INIT: version 2.96 booting [2025-09-24 03:16:26.628] INIT: Entering runlevel: 5 [2025-09-24 03:16:26.787] mtd28 attached [2025-09-24 03:16:26.787] mtd24 attached [2025-09-24 03:16:26.819] mtd32 attached [2025-09-24 03:16:26.819] ubi0:animations is mounted. [2025-09-24 03:16:26.851] ubi1:textures is mounted. [2025-09-24 03:16:26.851] RTNETLINK answers: File exists [2025-09-24 03:16:26.909] ubi2:dml_code is mounted. [2025-09-24 03:16:26.909] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:16:26.909] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:16:26.909] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:16:26.909] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:16:26.909] data.LB_FadeInType0=100 [2025-09-24 03:16:26.909] data.CHLH_FadeInType0=0 [2025-09-24 03:16:26.909] data.WU_FadeInDelay=0 [2025-09-24 03:16:26.909] max_time_out=0 [2025-09-24 03:16:26.909] No splash screen [2025-09-24 03:16:26.909] stop dss Done [2025-09-24 03:16:26.909] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:16:26.973] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:16:26.973] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:16:26.973] /dev/mem opened. [2025-09-24 03:16:26.973] Memory mapped at address 0xffffb0040000. [2025-09-24 03:16:26.973] Read at address 0x00600018 (0xffffb0040018): 0x00000000 [2025-09-24 03:16:26.973] Write at address 0x00600018 (0xffffb0040018): 0x00400040, readback 0x00400040 [2025-09-24 03:16:27.068] Loaded PowerVR consumer services. [2025-09-24 03:16:27.196] 512+0 records in [2025-09-24 03:16:27.196] 512+0 records out [2025-09-24 03:16:27.229] Waiting data available... [2025-09-24 03:16:27.244] Starting syslogd/klogd: done [2025-09-24 03:16:27.260] DML Start [2025-09-24 03:16:27.452] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:16:27.676] DML res1: 0 [2025-09-24 03:16:28.113] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:16:28.113] Read Success [2025-09-24 03:16:28.113] Verifying certificate... [2025-09-24 03:16:28.385] Verified OK [2025-09-24 03:16:28.400] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:16:30.119] Verified OK [2025-09-24 03:16:30.119] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:16:30.662] Verified OK [2025-09-24 03:16:30.662] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:16:33.252] fs.protected_hardlinks = 1 [2025-09-24 03:16:33.268] fs.protected_symlinks = 1 [2025-09-24 03:16:33.284] kernel.modules_disabled = 1 [2025-09-24 03:16:33.476] [2025-09-24 03:16:33.476] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:16:34.783] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:16:42.556] SBL1:1210.0.1.0 [2025-09-24 03:16:42.604] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:16:44.171] SBL2:1210.0.1.0 [2025-09-24 03:16:44.219] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:16:44.315] j-A [2025-09-24 03:16:51.669] The R5 Autosar Classic is running [2025-09-24 03:16:51.691] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:16:51.691] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:16:52.299] INIT: version 2.96 booting [2025-09-24 03:16:52.410] INIT: Entering runlevel: 5 [2025-09-24 03:16:52.570] mtd24 attached [2025-09-24 03:16:52.570] mtd28 attached [2025-09-24 03:16:52.602] mtd32 attached [2025-09-24 03:16:52.618] ubi0:textures is mounted. [2025-09-24 03:16:52.699] RTNETLINK answers: File exists [2025-09-24 03:16:52.699] ubi1:animations is mounted. [2025-09-24 03:16:52.699] ubi2:dml_code is mounted. [2025-09-24 03:16:52.699] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:16:52.699] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:16:52.699] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:16:52.699] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:16:52.699] data.LB_FadeInType0=100 [2025-09-24 03:16:52.699] data.CHLH_FadeInType0=0 [2025-09-24 03:16:52.699] data.WU_FadeInDelay=0 [2025-09-24 03:16:52.699] max_time_out=0 [2025-09-24 03:16:52.699] No splash screen [2025-09-24 03:16:52.699] stop dss Done [2025-09-24 03:16:52.699] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:16:52.777] /dev/mem opened. [2025-09-24 03:16:52.777] Memory mapped at address 0xffff90940000. [2025-09-24 03:16:52.777] Read at address 0x00600018 (0xffff90940018): 0x00000000 [2025-09-24 03:16:52.777] Write at address 0x00600018 (0xffff90940018): 0x00400040, readback 0x00400040 [2025-09-24 03:16:52.777] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:16:52.777] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:16:52.889] Loaded PowerVR consumer services. [2025-09-24 03:16:53.001] 512+0 records in [2025-09-24 03:16:53.001] 512+0 records out [2025-09-24 03:16:53.001] Waiting data available... [2025-09-24 03:16:53.049] Starting syslogd/klogd: done [2025-09-24 03:16:53.065] DML Start [2025-09-24 03:16:53.241] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:16:53.497] DML res1: 0 [2025-09-24 03:16:53.897] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:16:53.897] Read Success [2025-09-24 03:16:53.913] Verifying certificate... [2025-09-24 03:16:54.152] Verified OK [2025-09-24 03:16:54.168] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:16:55.863] Verified OK [2025-09-24 03:16:55.863] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:16:56.478] Verified OK [2025-09-24 03:16:56.478] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:16:59.020] fs.protected_hardlinks = 1 [2025-09-24 03:16:59.020] fs.protected_symlinks = 1 [2025-09-24 03:16:59.036] kernel.modules_disabled = 1 [2025-09-24 03:16:59.228] [2025-09-24 03:16:59.228] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:17:00.573] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:17:08.351] SBL1:1210.0.1.0 [2025-09-24 03:17:08.399] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:17:09.966] SBL2:1210.0.1.0 [2025-09-24 03:17:09.998] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:17:10.109] j-A [2025-09-24 03:17:17.482] The R5 Autosar Classic is running [2025-09-24 03:17:17.482] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:17:17.482] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:17:18.088] INIT: version 2.96 booting [2025-09-24 03:17:18.201] INIT: Entering runlevel: 5 [2025-09-24 03:17:18.360] mtd28 attached [2025-09-24 03:17:18.376] mtd32 attached [2025-09-24 03:17:18.376] mtd24 attached [2025-09-24 03:17:18.424] ubi0:animations is mounted. [2025-09-24 03:17:18.487] RTNETLINK answers: File exists [2025-09-24 03:17:18.487] ubi1:dml_code is mounted. [2025-09-24 03:17:18.487] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:17:18.487] ubi2:textures is mounted. [2025-09-24 03:17:18.487] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:17:18.487] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:17:18.487] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:17:18.487] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:17:18.487] data.LB_FadeInType0=100 [2025-09-24 03:17:18.487] data.CHLH_FadeInType0=0 [2025-09-24 03:17:18.487] data.WU_FadeInDelay=0 [2025-09-24 03:17:18.487] max_time_out=0 [2025-09-24 03:17:18.487] No splash screen [2025-09-24 03:17:18.487] stop dss Done [2025-09-24 03:17:18.555] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:17:18.555] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:17:18.555] /dev/mem opened. [2025-09-24 03:17:18.555] Memory mapped at address 0xffffa636c000. [2025-09-24 03:17:18.555] Read at address 0x00600018 (0xffffa636c018): 0x00000000 [2025-09-24 03:17:18.555] Write at address 0x00600018 (0xffffa636c018): 0x00400040, readback 0x00400040 [2025-09-24 03:17:18.763] Loaded PowerVR consumer services. [2025-09-24 03:17:18.821] 512+0 records in [2025-09-24 03:17:18.821] 512+0 records out [2025-09-24 03:17:18.821] Waiting data available... [2025-09-24 03:17:18.837] Starting syslogd/klogd: done [2025-09-24 03:17:18.853] DML Start [2025-09-24 03:17:19.013] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:17:19.237] DML res1: 0 [2025-09-24 03:17:19.755] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:17:19.755] Read Success [2025-09-24 03:17:19.755] Verifying certificate... [2025-09-24 03:17:20.011] Verified OK [2025-09-24 03:17:20.027] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:17:21.865] Verified OK [2025-09-24 03:17:21.865] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:17:22.366] Verified OK [2025-09-24 03:17:22.366] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:17:24.796] fs.protected_hardlinks = 1 [2025-09-24 03:17:24.811] fs.protected_symlinks = 1 [2025-09-24 03:17:24.811] kernel.modules_disabled = 1 [2025-09-24 03:17:25.020] [2025-09-24 03:17:25.020] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:17:26.363] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:17:34.147] SBL1:1210.0.1.0 [2025-09-24 03:17:34.194] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:17:35.761] SBL2:1210.0.1.0 [2025-09-24 03:17:35.792] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:17:35.905] j-A [2025-09-24 03:17:43.258] The R5 Autosar Classic is running [2025-09-24 03:17:43.258] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:17:43.279] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:17:43.887] INIT: version 2.96 booting [2025-09-24 03:17:43.998] INIT: Entering runlevel: 5 [2025-09-24 03:17:44.143] mtd24 attached [2025-09-24 03:17:44.159] mtd32 attached [2025-09-24 03:17:44.159] mtd28 attached [2025-09-24 03:17:44.254] RTNETLINK answers: File exists [2025-09-24 03:17:44.254] ubi0:textures is mounted. [2025-09-24 03:17:44.254] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:17:44.254] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:17:44.254] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:17:44.254] ubi1:dml_code is mounted. [2025-09-24 03:17:44.254] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:17:44.254] ubi2:animations is mounted. [2025-09-24 03:17:44.254] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:17:44.281] data.LB_FadeInType0=100 [2025-09-24 03:17:44.281] data.CHLH_FadeInType0=0 [2025-09-24 03:17:44.281] data.WU_FadeInDelay=0 [2025-09-24 03:17:44.281] max_time_out=0 [2025-09-24 03:17:44.281] No splash screen [2025-09-24 03:17:44.281] stop dss Done [2025-09-24 03:17:44.297] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:17:44.325] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:17:44.361] /dev/mem opened. [2025-09-24 03:17:44.361] Memory mapped at address 0xffff8f18b000. [2025-09-24 03:17:44.361] Read at address 0x00600018 (0xffff8f18b018): 0x00000000 [2025-09-24 03:17:44.361] Write at address 0x00600018 (0xffff8f18b018): 0x00400040, readback 0x00400040 [2025-09-24 03:17:44.440] Loaded PowerVR consumer services. [2025-09-24 03:17:44.568] 512+0 records in [2025-09-24 03:17:44.568] 512+0 records out [2025-09-24 03:17:44.584] Waiting data available... [2025-09-24 03:17:44.617] Starting syslogd/klogd: done [2025-09-24 03:17:44.633] DML Start [2025-09-24 03:17:44.808] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:17:45.032] DML res1: 0 [2025-09-24 03:17:45.487] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:17:45.487] Read Success [2025-09-24 03:17:45.487] Verifying certificate... [2025-09-24 03:17:45.742] Verified OK [2025-09-24 03:17:45.774] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:17:47.437] Verified OK [2025-09-24 03:17:47.437] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:17:48.044] Verified OK [2025-09-24 03:17:48.060] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:17:50.699] fs.protected_hardlinks = 1 [2025-09-24 03:17:50.715] fs.protected_symlinks = 1 [2025-09-24 03:17:50.715] kernel.modules_disabled = 1 [2025-09-24 03:17:50.891] [2025-09-24 03:17:50.891] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:17:52.122] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:17:59.931] SBL1:1210.0.1.0 [2025-09-24 03:17:59.979] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:18:01.545] SBL2:1210.0.1.0 [2025-09-24 03:18:01.594] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:18:01.689] j-A [2025-09-24 03:18:09.043] The R5 Autosar Classic is running [2025-09-24 03:18:09.066] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:18:09.066] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:18:09.674] INIT: version 2.96 booting [2025-09-24 03:18:09.786] INIT: Entering runlevel: 5 [2025-09-24 03:18:09.946] mtd24 attached [2025-09-24 03:18:09.946] mtd28 attached [2025-09-24 03:18:09.962] mtd32 attached [2025-09-24 03:18:10.010] ubi1:animations is mounted. [2025-09-24 03:18:10.010] ubi0:textures is mounted. [2025-09-24 03:18:10.077] RTNETLINK answers: File exists [2025-09-24 03:18:10.077] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:18:10.077] ubi2:dml_code is mounted. [2025-09-24 03:18:10.077] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:18:10.077] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:18:10.077] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:18:10.077] data.LB_FadeInType0=100 [2025-09-24 03:18:10.077] data.CHLH_FadeInType0=0 [2025-09-24 03:18:10.077] data.WU_FadeInDelay=0 [2025-09-24 03:18:10.077] max_time_out=0 [2025-09-24 03:18:10.077] No splash screen [2025-09-24 03:18:10.077] stop dss Done [2025-09-24 03:18:10.077] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:18:10.125] /dev/mem opened. [2025-09-24 03:18:10.125] Memory mapped at address 0xffff7f966000. [2025-09-24 03:18:10.151] Read at address 0x00600018 (0xffff7f966018): 0x00000000 [2025-09-24 03:18:10.151] Write at address 0x00600018 (0xffff7f966018): 0x00400040, readback 0x00400040 [2025-09-24 03:18:10.151] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:18:10.167] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:18:10.278] Loaded PowerVR consumer services. [2025-09-24 03:18:10.374] Waiting data available... [2025-09-24 03:18:10.390] 512+0 records in [2025-09-24 03:18:10.390] 512+0 records out [2025-09-24 03:18:10.438] Starting syslogd/klogd: done [2025-09-24 03:18:10.454] DML Start [2025-09-24 03:18:10.630] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:18:10.886] DML res1: 0 [2025-09-24 03:18:11.277] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:18:11.277] Read Success [2025-09-24 03:18:11.277] Verifying certificate... [2025-09-24 03:18:11.565] Verified OK [2025-09-24 03:18:11.581] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:18:13.283] Verified OK [2025-09-24 03:18:13.283] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:18:13.874] Verified OK [2025-09-24 03:18:13.874] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:18:16.368] fs.protected_hardlinks = 1 [2025-09-24 03:18:16.384] fs.protected_symlinks = 1 [2025-09-24 03:18:16.400] kernel.modules_disabled = 1 [2025-09-24 03:18:16.592] [2025-09-24 03:18:16.592] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:18:17.979] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:18:25.728] SBL1:1210.0.1.0 [2025-09-24 03:18:25.776] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:18:27.343] SBL2:1210.0.1.0 [2025-09-24 03:18:27.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:18:27.486] j-A [2025-09-24 03:18:34.842] The R5 Autosar Classic is running [2025-09-24 03:18:34.842] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:18:34.863] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:18:35.469] INIT: version 2.96 booting [2025-09-24 03:18:35.598] INIT: Entering runlevel: 5 [2025-09-24 03:18:35.741] mtd24 attached [2025-09-24 03:18:35.757] mtd28 attached [2025-09-24 03:18:35.757] mtd32 attached [2025-09-24 03:18:35.877] RTNETLINK answers: File exists [2025-09-24 03:18:35.877] ubi0:textures is mounted. [2025-09-24 03:18:35.877] ubi1:animations is mounted. [2025-09-24 03:18:35.877] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:18:35.877] ubi2:dml_code is mounted. [2025-09-24 03:18:35.877] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:18:35.877] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:18:35.877] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:18:35.877] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:18:35.877] data.LB_FadeInType0=100 [2025-09-24 03:18:35.877] data.CHLH_FadeInType0=0 [2025-09-24 03:18:35.877] data.WU_FadeInDelay=0 [2025-09-24 03:18:35.877] max_time_out=0 [2025-09-24 03:18:35.877] No splash screen [2025-09-24 03:18:35.877] stop dss Done [2025-09-24 03:18:35.963] /dev/mem opened. [2025-09-24 03:18:35.963] Memory mapped at address 0xffffad427000. [2025-09-24 03:18:35.963] Read at address 0x00600018 (0xffffad427018): 0x00000000 [2025-09-24 03:18:35.963] Write at address 0x00600018 (0xffffad427018): 0x00400040, readback 0x00400040 [2025-09-24 03:18:35.963] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:18:35.963] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:18:36.043] Loaded PowerVR consumer services. [2025-09-24 03:18:36.171] 512+0 records in [2025-09-24 03:18:36.171] 512+0 records out [2025-09-24 03:18:36.187] Waiting data available... [2025-09-24 03:18:36.187] Starting syslogd/klogd: done [2025-09-24 03:18:36.219] DML Start [2025-09-24 03:18:36.427] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:18:36.635] DML res1: 0 [2025-09-24 03:18:37.099] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:18:37.099] Read Success [2025-09-24 03:18:37.114] Verifying certificate... [2025-09-24 03:18:37.386] Verified OK [2025-09-24 03:18:37.402] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:18:39.072] Verified OK [2025-09-24 03:18:39.072] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:18:39.679] Verified OK [2025-09-24 03:18:39.679] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:18:42.364] fs.protected_hardlinks = 1 [2025-09-24 03:18:42.380] fs.protected_symlinks = 1 [2025-09-24 03:18:42.380] kernel.modules_disabled = 1 [2025-09-24 03:18:42.573] [2025-09-24 03:18:42.573] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:18:43.723] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:18:51.529] SBL1:1210.0.1.0 [2025-09-24 03:18:51.577] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:18:53.144] SBL2:1210.0.1.0 [2025-09-24 03:18:53.192] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:18:53.288] j-A [2025-09-24 03:19:00.643] The R5 Autosar Classic is running [2025-09-24 03:19:00.664] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:19:00.664] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:19:01.271] INIT: version 2.96 booting [2025-09-24 03:19:01.384] INIT: Entering runlevel: 5 [2025-09-24 03:19:01.544] mtd28 attached [2025-09-24 03:19:01.544] mtd24 attached [2025-09-24 03:19:01.559] mtd32 attached [2025-09-24 03:19:01.591] ubi0:animations is mounted. [2025-09-24 03:19:01.607] RTNETLINK answers: File exists [2025-09-24 03:19:01.607] ubi1:textures is mounted. [2025-09-24 03:19:01.669] ubi2:dml_code is mounted. [2025-09-24 03:19:01.669] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:19:01.669] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:19:01.669] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:19:01.669] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:19:01.669] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:19:01.669] data.LB_FadeInType0=100 [2025-09-24 03:19:01.669] data.CHLH_FadeInType0=0 [2025-09-24 03:19:01.669] data.WU_FadeInDelay=0 [2025-09-24 03:19:01.669] max_time_out=0 [2025-09-24 03:19:01.669] No splash screen [2025-09-24 03:19:01.669] stop dss Done [2025-09-24 03:19:01.738] /dev/mem opened. [2025-09-24 03:19:01.738] Memory mapped at address 0xffffa8a96000. [2025-09-24 03:19:01.738] Read at address 0x00600018 (0xffffa8a96018): 0x00000000 [2025-09-24 03:19:01.738] Write at address 0x00600018 (0xffffa8a96018): 0x00400040, readback 0x00400040 [2025-09-24 03:19:01.738] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:19:01.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:19:01.865] Loaded PowerVR consumer services. [2025-09-24 03:19:01.960] 512+0 records in [2025-09-24 03:19:01.976] 512+0 records out [2025-09-24 03:19:01.976] Waiting data available... [2025-09-24 03:19:02.025] Starting syslogd/klogd: done [2025-09-24 03:19:02.041] DML Start [2025-09-24 03:19:02.249] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:19:02.457] DML res1: 0 [2025-09-24 03:19:02.850] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:19:02.850] Read Success [2025-09-24 03:19:02.850] Verifying certificate... [2025-09-24 03:19:03.106] Verified OK [2025-09-24 03:19:03.122] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:19:04.744] Verified OK [2025-09-24 03:19:04.744] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:19:05.425] Verified OK [2025-09-24 03:19:05.425] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:19:08.030] fs.protected_hardlinks = 1 [2025-09-24 03:19:08.030] fs.protected_symlinks = 1 [2025-09-24 03:19:08.046] kernel.modules_disabled = 1 [2025-09-24 03:19:08.239] [2025-09-24 03:19:08.239] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:19:09.555] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:19:17.321] SBL1:1210.0.1.0 [2025-09-24 03:19:17.353] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:19:18.935] SBL2:1210.0.1.0 [2025-09-24 03:19:18.967] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:19:19.063] j-A [2025-09-24 03:19:26.419] The R5 Autosar Classic is running [2025-09-24 03:19:26.441] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:19:26.441] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:19:27.049] INIT: version 2.96 booting [2025-09-24 03:19:27.160] INIT: Entering runlevel: 5 [2025-09-24 03:19:27.321] mtd32 attached [2025-09-24 03:19:27.321] mtd28 attached [2025-09-24 03:19:27.337] mtd24 attached [2025-09-24 03:19:27.384] RTNETLINK answers: File exists [2025-09-24 03:19:27.384] ubi0:dml_code is mounted. [2025-09-24 03:19:27.448] ubi1:animations is mounted. [2025-09-24 03:19:27.448] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:19:27.448] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:19:27.448] ubi2:textures is mounted. [2025-09-24 03:19:27.448] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:19:27.448] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:19:27.448] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:19:27.448] data.LB_FadeInType0=100 [2025-09-24 03:19:27.448] data.CHLH_FadeInType0=0 [2025-09-24 03:19:27.448] data.WU_FadeInDelay=0 [2025-09-24 03:19:27.448] max_time_out=0 [2025-09-24 03:19:27.448] No splash screen [2025-09-24 03:19:27.448] stop dss Done [2025-09-24 03:19:27.490] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:19:27.490] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:19:27.490] /dev/mem opened. [2025-09-24 03:19:27.490] Memory mapped at address 0xffff8eb0a000. [2025-09-24 03:19:27.516] Read at address 0x00600018 (0xffff8eb0a018): 0x00000000 [2025-09-24 03:19:27.516] Write at address 0x00600018 (0xffff8eb0a018): 0x00400040, readback 0x00400040 [2025-09-24 03:19:27.628] Loaded PowerVR consumer services. [2025-09-24 03:19:27.770] 512+0 records in [2025-09-24 03:19:27.770] 512+0 records out [2025-09-24 03:19:27.770] Waiting data available... [2025-09-24 03:19:27.802] Starting syslogd/klogd: done [2025-09-24 03:19:27.818] DML Start [2025-09-24 03:19:27.978] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:19:28.201] DML res1: 0 [2025-09-24 03:19:28.696] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:19:28.696] Read Success [2025-09-24 03:19:28.696] Verifying certificate... [2025-09-24 03:19:28.984] Verified OK [2025-09-24 03:19:29.000] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:19:30.781] Verified OK [2025-09-24 03:19:30.781] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:19:31.324] Verified OK [2025-09-24 03:19:31.340] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:19:33.849] fs.protected_hardlinks = 1 [2025-09-24 03:19:33.865] fs.protected_symlinks = 1 [2025-09-24 03:19:33.865] kernel.modules_disabled = 1 [2025-09-24 03:19:34.058] [2025-09-24 03:19:34.058] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:19:35.324] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:19:43.131] SBL1:1210.0.1.0 [2025-09-24 03:19:43.163] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:19:44.745] SBL2:1210.0.1.0 [2025-09-24 03:19:44.777] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:19:44.890] j-A [2025-09-24 03:19:52.229] The R5 Autosar Classic is running [2025-09-24 03:19:52.260] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:19:52.260] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:19:52.868] INIT: version 2.96 booting [2025-09-24 03:19:52.980] INIT: Entering runlevel: 5 [2025-09-24 03:19:53.124] mtd24 attached [2025-09-24 03:19:53.140] mtd32 attached [2025-09-24 03:19:53.156] mtd28 attached [2025-09-24 03:19:53.204] RTNETLINK answers: File exists [2025-09-24 03:19:53.204] ubi0:textures is mounted. [2025-09-24 03:19:53.204] ubi2:animations is mounted. [2025-09-24 03:19:53.263] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:19:53.263] ubi1:dml_code is mounted. [2025-09-24 03:19:53.263] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:19:53.263] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:19:53.263] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:19:53.263] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:19:53.263] data.LB_FadeInType0=100 [2025-09-24 03:19:53.263] data.CHLH_FadeInType0=0 [2025-09-24 03:19:53.263] data.WU_FadeInDelay=0 [2025-09-24 03:19:53.263] max_time_out=0 [2025-09-24 03:19:53.263] No splash screen [2025-09-24 03:19:53.263] stop dss Done [2025-09-24 03:19:53.357] /dev/mem opened. [2025-09-24 03:19:53.357] Memory mapped at address 0xffff83b07000. [2025-09-24 03:19:53.357] Read at address 0x00600018 (0xffff83b07018): 0x00000000 [2025-09-24 03:19:53.357] Write at address 0x00600018 (0xffff83b07018): 0x00400040, readback 0x00400040 [2025-09-24 03:19:53.357] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:19:53.357] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:19:53.421] Loaded PowerVR consumer services. [2025-09-24 03:19:53.575] 512+0 records in [2025-09-24 03:19:53.575] 512+0 records out [2025-09-24 03:19:53.575] Waiting data available... [2025-09-24 03:19:53.607] Starting syslogd/klogd: done [2025-09-24 03:19:53.640] DML Start [2025-09-24 03:19:53.799] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:19:54.024] DML res1: 0 [2025-09-24 03:19:54.423] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:19:54.445] Read Success [2025-09-24 03:19:54.445] Verifying certificate... [2025-09-24 03:19:54.668] Verified OK [2025-09-24 03:19:54.700] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:19:56.316] Verified OK [2025-09-24 03:19:56.316] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:19:56.971] Verified OK [2025-09-24 03:19:56.971] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:19:59.705] fs.protected_hardlinks = 1 [2025-09-24 03:19:59.733] fs.protected_symlinks = 1 [2025-09-24 03:19:59.733] kernel.modules_disabled = 1 [2025-09-24 03:19:59.908] [2025-09-24 03:19:59.908] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:20:01.147] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:20:08.927] SBL1:1210.0.1.0 [2025-09-24 03:20:08.959] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:20:10.541] SBL2:1210.0.1.0 [2025-09-24 03:20:10.573] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:20:10.686] j-A [2025-09-24 03:20:18.057] The R5 Autosar Classic is running [2025-09-24 03:20:18.057] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:20:18.057] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:20:18.664] INIT: version 2.96 booting [2025-09-24 03:20:18.776] INIT: Entering runlevel: 5 [2025-09-24 03:20:18.935] mtd28 attached [2025-09-24 03:20:18.935] mtd32 attached [2025-09-24 03:20:18.951] mtd24 attached [2025-09-24 03:20:18.984] ubi0:animations is mounted. [2025-09-24 03:20:19.000] RTNETLINK answers: File exists [2025-09-24 03:20:19.051] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:20:19.051] ubi2:textures is mounted. [2025-09-24 03:20:19.051] ubi1:dml_code is mounted. [2025-09-24 03:20:19.051] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:20:19.051] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:20:19.051] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:20:19.051] data.LB_FadeInType0=100 [2025-09-24 03:20:19.051] data.CHLH_FadeInType0=0 [2025-09-24 03:20:19.051] data.WU_FadeInDelay=0 [2025-09-24 03:20:19.051] max_time_out=0 [2025-09-24 03:20:19.051] No splash screen [2025-09-24 03:20:19.051] stop dss Done [2025-09-24 03:20:19.051] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:20:19.131] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:20:19.131] /dev/mem opened. [2025-09-24 03:20:19.131] Memory mapped at address 0xffff836da000. [2025-09-24 03:20:19.131] Read at address 0x00600018 (0xffff836da018): 0x00000000 [2025-09-24 03:20:19.131] Write at address 0x00600018 (0xffff836da018): 0x00400040, readback 0x00400040 [2025-09-24 03:20:19.131] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:20:19.211] Loaded PowerVR consumer services. [2025-09-24 03:20:19.355] 512+0 records in [2025-09-24 03:20:19.371] 512+0 records out [2025-09-24 03:20:19.371] Waiting data available... [2025-09-24 03:20:19.403] Starting syslogd/klogd: done [2025-09-24 03:20:19.419] DML Start [2025-09-24 03:20:19.595] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:20:19.818] DML res1: 0 [2025-09-24 03:20:20.297] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:20:20.297] Read Success [2025-09-24 03:20:20.297] Verifying certificate... [2025-09-24 03:20:20.520] Verified OK [2025-09-24 03:20:20.536] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:20:22.082] Verified OK [2025-09-24 03:20:22.082] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:20:22.619] Verified OK [2025-09-24 03:20:22.619] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:20:25.497] fs.protected_hardlinks = 1 [2025-09-24 03:20:25.497] fs.protected_symlinks = 1 [2025-09-24 03:20:25.513] kernel.modules_disabled = 1 [2025-09-24 03:20:25.721] [2025-09-24 03:20:25.721] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:20:26.919] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:20:34.728] SBL1:1210.0.1.0 [2025-09-24 03:20:34.760] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:20:36.342] SBL2:1210.0.1.0 [2025-09-24 03:20:36.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:20:36.486] j-A [2025-09-24 03:20:43.825] The R5 Autosar Classic is running [2025-09-24 03:20:43.849] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:20:43.849] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:20:44.458] INIT: version 2.96 booting [2025-09-24 03:20:44.569] INIT: Entering runlevel: 5 [2025-09-24 03:20:44.729] mtd28 attached [2025-09-24 03:20:44.745] mtd32 attached [2025-09-24 03:20:44.745] mtd24 attached [2025-09-24 03:20:44.794] ubi0:animations is mounted. [2025-09-24 03:20:44.862] ubi2:textures is mounted. [2025-09-24 03:20:44.862] RTNETLINK answers: File exists [2025-09-24 03:20:44.862] ubi1:dml_code is mounted. [2025-09-24 03:20:44.862] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:20:44.862] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:20:44.862] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:20:44.862] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:20:44.862] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:20:44.862] data.LB_FadeInType0=100 [2025-09-24 03:20:44.862] data.CHLH_FadeInType0=0 [2025-09-24 03:20:44.862] data.WU_FadeInDelay=0 [2025-09-24 03:20:44.862] max_time_out=0 [2025-09-24 03:20:44.862] No splash screen [2025-09-24 03:20:44.862] stop dss Done [2025-09-24 03:20:44.894] /dev/mem opened. [2025-09-24 03:20:44.920] Memory mapped at address 0xffffa9435000. [2025-09-24 03:20:44.920] Read at address 0x00600018 (0xffffa9435018): 0x00000000 [2025-09-24 03:20:44.920] Write at address 0x00600018 (0xffffa9435018): 0x00400040, readback 0x00400040 [2025-09-24 03:20:44.937] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:20:44.952] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:20:45.129] Loaded PowerVR consumer services. [2025-09-24 03:20:45.183] 512+0 records in [2025-09-24 03:20:45.183] 512+0 records out [2025-09-24 03:20:45.183] Waiting data available... [2025-09-24 03:20:45.199] Starting syslogd/klogd: done [2025-09-24 03:20:45.215] DML Start [2025-09-24 03:20:45.359] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:20:45.567] DML res1: 0 [2025-09-24 03:20:46.139] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:20:46.139] Read Success [2025-09-24 03:20:46.139] Verifying certificate... [2025-09-24 03:20:46.379] Verified OK [2025-09-24 03:20:46.395] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:20:48.019] Verified OK [2025-09-24 03:20:48.019] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:20:48.601] Verified OK [2025-09-24 03:20:48.601] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:20:51.351] fs.protected_hardlinks = 1 [2025-09-24 03:20:51.351] fs.protected_symlinks = 1 [2025-09-24 03:20:51.367] kernel.modules_disabled = 1 [2025-09-24 03:20:51.559] [2025-09-24 03:20:51.559] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:20:52.692] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:21:00.528] SBL1:1210.0.1.0 [2025-09-24 03:21:00.576] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:21:02.143] SBL2:1210.0.1.0 [2025-09-24 03:21:02.175] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:21:02.287] j-A [2025-09-24 03:21:09.641] The R5 Autosar Classic is running [2025-09-24 03:21:09.662] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:21:09.662] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:21:10.269] INIT: version 2.96 booting [2025-09-24 03:21:10.381] INIT: Entering runlevel: 5 [2025-09-24 03:21:10.540] mtd24 attached [2025-09-24 03:21:10.540] mtd28 attached [2025-09-24 03:21:10.556] mtd32 attached [2025-09-24 03:21:10.604] ubi0:textures is mounted. [2025-09-24 03:21:10.657] RTNETLINK answers: File exists [2025-09-24 03:21:10.657] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:21:10.657] ubi2:dml_code is mounted. [2025-09-24 03:21:10.657] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:21:10.657] ubi1:animations is mounted. [2025-09-24 03:21:10.657] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:21:10.657] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:21:10.657] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:21:10.657] data.LB_FadeInType0=100 [2025-09-24 03:21:10.678] data.CHLH_FadeInType0=0 [2025-09-24 03:21:10.678] data.WU_FadeInDelay=0 [2025-09-24 03:21:10.678] max_time_out=0 [2025-09-24 03:21:10.678] No splash screen [2025-09-24 03:21:10.678] stop dss Done [2025-09-24 03:21:10.727] /dev/mem opened. [2025-09-24 03:21:10.727] Memory mapped at address 0xffff94fb7000. [2025-09-24 03:21:10.764] Read at address 0x00600018 (0xffff94fb7018): 0x00000000 [2025-09-24 03:21:10.764] Write at address 0x00600018 (0xffff94fb7018): 0x00400040, readback 0x00400040 [2025-09-24 03:21:10.764] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:21:10.764] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:21:10.939] Loaded PowerVR consumer services. [2025-09-24 03:21:10.955] 512+0 records in [2025-09-24 03:21:10.955] 512+0 records out [2025-09-24 03:21:11.003] Starting syslogd/klogd: done [2025-09-24 03:21:11.084] Waiting data available... [2025-09-24 03:21:11.084] DML Start [2025-09-24 03:21:11.275] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:21:11.483] DML res1: 0 [2025-09-24 03:21:11.893] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:21:11.893] Read Success [2025-09-24 03:21:11.893] Verifying certificate... [2025-09-24 03:21:12.165] Verified OK [2025-09-24 03:21:12.198] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:21:13.861] Verified OK [2025-09-24 03:21:13.861] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:21:14.458] Verified OK [2025-09-24 03:21:14.458] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:21:16.997] fs.protected_hardlinks = 1 [2025-09-24 03:21:16.997] fs.protected_symlinks = 1 [2025-09-24 03:21:16.997] kernel.modules_disabled = 1 [2025-09-24 03:21:17.172] [2025-09-24 03:21:17.172] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:21:18.522] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:21:26.336] SBL1:1210.0.1.0 [2025-09-24 03:21:26.368] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:21:27.950] SBL2:1210.0.1.0 [2025-09-24 03:21:27.982] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:21:28.094] j-A [2025-09-24 03:21:35.465] The R5 Autosar Classic is running [2025-09-24 03:21:35.465] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:21:35.465] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:21:36.072] INIT: version 2.96 booting [2025-09-24 03:21:36.184] INIT: Entering runlevel: 5 [2025-09-24 03:21:36.344] mtd32 attached [2025-09-24 03:21:36.360] mtd28 attached [2025-09-24 03:21:36.360] mtd24 attached [2025-09-24 03:21:36.407] RTNETLINK answers: File exists [2025-09-24 03:21:36.477] ubi0:dml_code is mounted. [2025-09-24 03:21:36.477] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:21:36.477] ubi2:textures is mounted. [2025-09-24 03:21:36.477] ubi1:animations is mounted. [2025-09-24 03:21:36.477] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:21:36.477] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:21:36.477] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:21:36.477] data.LB_FadeInType0=100 [2025-09-24 03:21:36.477] data.CHLH_FadeInType0=0 [2025-09-24 03:21:36.477] data.WU_FadeInDelay=0 [2025-09-24 03:21:36.477] max_time_out=0 [2025-09-24 03:21:36.477] No splash screen [2025-09-24 03:21:36.477] stop dss Done [2025-09-24 03:21:36.477] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:21:36.553] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:21:36.553] /dev/mem opened. [2025-09-24 03:21:36.553] Memory mapped at address 0xffffa24cb000. [2025-09-24 03:21:36.553] Read at address 0x00600018 (0xffffa24cb018): 0x00000000 [2025-09-24 03:21:36.553] Write at address 0x00600018 (0xffffa24cb018): 0x00400040, readback 0x00400040 [2025-09-24 03:21:36.553] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:21:36.729] Loaded PowerVR consumer services. [2025-09-24 03:21:36.761] 512+0 records in [2025-09-24 03:21:36.761] 512+0 records out [2025-09-24 03:21:36.809] Waiting data available... [2025-09-24 03:21:36.825] Starting syslogd/klogd: done [2025-09-24 03:21:36.841] DML Start [2025-09-24 03:21:37.017] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:21:37.208] DML res1: 0 [2025-09-24 03:21:37.688] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:21:37.704] Read Success [2025-09-24 03:21:37.704] Verifying certificate... [2025-09-24 03:21:37.944] Verified OK [2025-09-24 03:21:37.944] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:21:39.549] Verified OK [2025-09-24 03:21:39.549] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:21:40.167] Verified OK [2025-09-24 03:21:40.167] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:21:42.886] fs.protected_hardlinks = 1 [2025-09-24 03:21:42.902] fs.protected_symlinks = 1 [2025-09-24 03:21:42.902] kernel.modules_disabled = 1 [2025-09-24 03:21:43.109] [2025-09-24 03:21:43.109] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:21:44.340] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:21:52.156] SBL1:1210.0.1.0 [2025-09-24 03:21:52.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:21:53.771] SBL2:1210.0.1.0 [2025-09-24 03:21:53.802] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:21:53.898] j-A [2025-09-24 03:22:01.251] The R5 Autosar Classic is running [2025-09-24 03:22:01.276] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:22:01.276] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:22:01.884] INIT: version 2.96 booting [2025-09-24 03:22:01.996] INIT: Entering runlevel: 5 [2025-09-24 03:22:02.155] mtd28 attached [2025-09-24 03:22:02.155] mtd24 attached [2025-09-24 03:22:02.172] mtd32 attached [2025-09-24 03:22:02.204] ubi0:animations is mounted. [2025-09-24 03:22:02.220] RTNETLINK answers: File exists [2025-09-24 03:22:02.256] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:22:02.256] ubi2:dml_code is mounted. [2025-09-24 03:22:02.256] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:22:02.256] ubi1:textures is mounted. [2025-09-24 03:22:02.256] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:22:02.256] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:22:02.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:22:02.299] data.LB_FadeInType0=100 [2025-09-24 03:22:02.299] data.CHLH_FadeInType0=0 [2025-09-24 03:22:02.299] data.WU_FadeInDelay=0 [2025-09-24 03:22:02.299] max_time_out=0 [2025-09-24 03:22:02.299] No splash screen [2025-09-24 03:22:02.299] stop dss Done [2025-09-24 03:22:02.371] /dev/mem opened. [2025-09-24 03:22:02.371] Memory mapped at address 0xffff869eb000. [2025-09-24 03:22:02.371] Read at address 0x00600018 (0xffff869eb018): 0x00000000 [2025-09-24 03:22:02.371] Write at address 0x00600018 (0xffff869eb018): 0x00400040, readback 0x00400040 [2025-09-24 03:22:02.371] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:22:02.387] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:22:02.531] Loaded PowerVR consumer services. [2025-09-24 03:22:02.579] 512+0 records in [2025-09-24 03:22:02.579] 512+0 records out [2025-09-24 03:22:02.610] Starting syslogd/klogd: done [2025-09-24 03:22:02.626] Waiting data available... [2025-09-24 03:22:02.626] DML Start [2025-09-24 03:22:02.786] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:22:03.058] DML res1: 0 [2025-09-24 03:22:03.457] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:22:03.478] Read Success [2025-09-24 03:22:03.478] Verifying certificate... [2025-09-24 03:22:03.687] Verified OK [2025-09-24 03:22:03.702] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:22:05.380] Verified OK [2025-09-24 03:22:05.380] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:22:05.972] Verified OK [2025-09-24 03:22:05.972] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:22:08.610] fs.protected_hardlinks = 1 [2025-09-24 03:22:08.610] fs.protected_symlinks = 1 [2025-09-24 03:22:08.625] kernel.modules_disabled = 1 [2025-09-24 03:22:08.817] [2025-09-24 03:22:08.817] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:22:10.129] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:22:17.927] SBL1:1210.0.1.0 [2025-09-24 03:22:17.975] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:22:19.542] SBL2:1210.0.1.0 [2025-09-24 03:22:19.574] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:22:19.686] j-A [2025-09-24 03:22:27.059] The R5 Autosar Classic is running [2025-09-24 03:22:27.059] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:22:27.059] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:22:27.666] INIT: version 2.96 booting [2025-09-24 03:22:27.778] INIT: Entering runlevel: 5 [2025-09-24 03:22:27.922] mtd24 attached [2025-09-24 03:22:27.937] mtd32 attached [2025-09-24 03:22:27.953] mtd28 attached [2025-09-24 03:22:28.051] ubi0:textures is mounted. [2025-09-24 03:22:28.051] RTNETLINK answers: File exists [2025-09-24 03:22:28.051] ubi1:dml_code is mounted. [2025-09-24 03:22:28.051] ubi2:animations is mounted. [2025-09-24 03:22:28.051] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:22:28.051] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:22:28.051] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:22:28.051] data.LB_FadeInType0=100 [2025-09-24 03:22:28.051] data.CHLH_FadeInType0=0 [2025-09-24 03:22:28.051] data.WU_FadeInDelay=0 [2025-09-24 03:22:28.051] max_time_out=0 [2025-09-24 03:22:28.051] No splash screen [2025-09-24 03:22:28.051] stop dss Done [2025-09-24 03:22:28.051] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:22:28.051] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:22:28.119] /dev/mem opened. [2025-09-24 03:22:28.119] Memory mapped at address 0xffff99bf5000. [2025-09-24 03:22:28.119] Read at address 0x00600018 (0xffff99bf5018): 0x00000000 [2025-09-24 03:22:28.119] Write at address 0x00600018 (0xffff99bf5018): 0x00400040, readback 0x00400040 [2025-09-24 03:22:28.135] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:22:28.151] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:22:28.230] Loaded PowerVR consumer services. [2025-09-24 03:22:28.358] Waiting data available... [2025-09-24 03:22:28.358] 512+0 records in [2025-09-24 03:22:28.374] 512+0 records out [2025-09-24 03:22:28.391] Starting syslogd/klogd: done [2025-09-24 03:22:28.407] DML Start [2025-09-24 03:22:28.598] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:22:28.870] DML res1: 0 [2025-09-24 03:22:29.221] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:22:29.243] Read Success [2025-09-24 03:22:29.243] Verifying certificate... [2025-09-24 03:22:29.482] Verified OK [2025-09-24 03:22:29.498] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:22:31.124] Verified OK [2025-09-24 03:22:31.124] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:22:31.843] Verified OK [2025-09-24 03:22:31.843] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:22:34.496] fs.protected_hardlinks = 1 [2025-09-24 03:22:34.496] fs.protected_symlinks = 1 [2025-09-24 03:22:34.496] kernel.modules_disabled = 1 [2025-09-24 03:22:34.688] [2025-09-24 03:22:34.688] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:22:35.924] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:22:43.740] SBL1:1210.0.1.0 [2025-09-24 03:22:43.772] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:22:45.354] SBL2:1210.0.1.0 [2025-09-24 03:22:45.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:22:45.482] j-A [2025-09-24 03:22:52.837] The R5 Autosar Classic is running [2025-09-24 03:22:52.860] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:22:52.860] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:22:53.468] INIT: version 2.96 booting [2025-09-24 03:22:53.580] INIT: Entering runlevel: 5 [2025-09-24 03:22:53.739] mtd32 attached [2025-09-24 03:22:53.755] mtd28 attached [2025-09-24 03:22:53.755] mtd24 attached [2025-09-24 03:22:53.803] ubi0:dml_code is mounted. [2025-09-24 03:22:53.866] RTNETLINK answers: File exists [2025-09-24 03:22:53.866] ubi2:textures is mounted. [2025-09-24 03:22:53.866] ubi1:animations is mounted. [2025-09-24 03:22:53.866] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:22:53.866] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:22:53.866] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:22:53.866] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:22:53.866] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:22:53.866] data.LB_FadeInType0=100 [2025-09-24 03:22:53.866] data.CHLH_FadeInType0=0 [2025-09-24 03:22:53.866] data.WU_FadeInDelay=0 [2025-09-24 03:22:53.866] max_time_out=0 [2025-09-24 03:22:53.866] No splash screen [2025-09-24 03:22:53.866] stop dss Done [2025-09-24 03:22:53.914] /dev/mem opened. [2025-09-24 03:22:53.959] Memory mapped at address 0xffff9925f000. [2025-09-24 03:22:53.959] Read at address 0x00600018 (0xffff9925f018): 0x00000000 [2025-09-24 03:22:53.959] Write at address 0x00600018 (0xffff9925f018): 0x00400040, readback 0x00400040 [2025-09-24 03:22:53.959] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:22:53.959] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:22:54.023] Loaded PowerVR consumer services. [2025-09-24 03:22:54.166] 512+0 records in [2025-09-24 03:22:54.166] 512+0 records out [2025-09-24 03:22:54.198] Waiting data available... [2025-09-24 03:22:54.214] Starting syslogd/klogd: done [2025-09-24 03:22:54.230] DML Start [2025-09-24 03:22:54.406] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:22:54.630] DML res1: 0 [2025-09-24 03:22:55.118] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:22:55.118] Read Success [2025-09-24 03:22:55.118] Verifying certificate... [2025-09-24 03:22:55.390] Verified OK [2025-09-24 03:22:55.406] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:22:56.997] Verified OK [2025-09-24 03:22:56.997] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:22:57.620] Verified OK [2025-09-24 03:22:57.620] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:23:00.274] fs.protected_hardlinks = 1 [2025-09-24 03:23:00.274] fs.protected_symlinks = 1 [2025-09-24 03:23:00.289] kernel.modules_disabled = 1 [2025-09-24 03:23:00.482] [2025-09-24 03:23:00.482] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:23:01.736] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:23:09.530] SBL1:1210.0.1.0 [2025-09-24 03:23:09.562] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:23:11.145] SBL2:1210.0.1.0 [2025-09-24 03:23:11.177] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:23:11.273] j-A [2025-09-24 03:23:18.628] The R5 Autosar Classic is running [2025-09-24 03:23:18.652] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:23:18.652] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:23:19.260] INIT: version 2.96 booting [2025-09-24 03:23:19.371] INIT: Entering runlevel: 5 [2025-09-24 03:23:19.532] mtd24 attached [2025-09-24 03:23:19.548] mtd28 attached [2025-09-24 03:23:19.548] mtd32 attached [2025-09-24 03:23:19.625] ubi1:animations is mounted. [2025-09-24 03:23:19.625] ubi0:textures is mounted. [2025-09-24 03:23:19.625] ubi2:dml_code is mounted. [2025-09-24 03:23:19.625] RTNETLINK answers: File exists [2025-09-24 03:23:19.673] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:23:19.673] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:23:19.673] data.LB_FadeInType0=100 [2025-09-24 03:23:19.673] data.CHLH_FadeInType0=0 [2025-09-24 03:23:19.673] data.WU_FadeInDelay=0 [2025-09-24 03:23:19.673] max_time_out=0 [2025-09-24 03:23:19.673] No splash screen [2025-09-24 03:23:19.673] stop dss Done [2025-09-24 03:23:19.673] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:23:19.673] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:23:19.673] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:23:19.728] /dev/mem opened. [2025-09-24 03:23:19.728] Memory mapped at address 0xffff932a4000. [2025-09-24 03:23:19.728] Read at address 0x00600018 (0xffff932a4018): 0x00000000 [2025-09-24 03:23:19.728] Write at address 0x00600018 (0xffff932a4018): 0x00400040, readback 0x00400040 [2025-09-24 03:23:19.728] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:23:19.728] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:23:19.952] Loaded PowerVR consumer services. [2025-09-24 03:23:19.968] 512+0 records in [2025-09-24 03:23:19.984] 512+0 records out [2025-09-24 03:23:20.016] Starting syslogd/klogd: Waiting data available... [2025-09-24 03:23:20.032] done [2025-09-24 03:23:20.048] DML Start [2025-09-24 03:23:20.240] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:23:20.464] DML res1: 0 [2025-09-24 03:23:20.879] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:23:20.895] Read Success [2025-09-24 03:23:20.895] Verifying certificate... [2025-09-24 03:23:21.167] Verified OK [2025-09-24 03:23:21.183] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:23:22.702] Verified OK [2025-09-24 03:23:22.702] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:23:23.411] Verified OK [2025-09-24 03:23:23.411] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:23:26.161] fs.protected_hardlinks = 1 [2025-09-24 03:23:26.161] fs.protected_symlinks = 1 [2025-09-24 03:23:26.177] kernel.modules_disabled = 1 [2025-09-24 03:23:26.368] [2025-09-24 03:23:26.368] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:23:27.540] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:23:35.315] SBL1:1210.0.1.0 [2025-09-24 03:23:35.364] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:23:36.930] SBL2:1210.0.1.0 [2025-09-24 03:23:36.962] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:23:37.073] j-A [2025-09-24 03:23:44.447] The R5 Autosar Classic is running [2025-09-24 03:23:44.447] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:23:44.447] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:23:45.053] INIT: version 2.96 booting [2025-09-24 03:23:45.150] INIT: Entering runlevel: 5 [2025-09-24 03:23:45.309] mtd32 attached [2025-09-24 03:23:45.326] mtd24 attached [2025-09-24 03:23:45.341] mtd28 attached [2025-09-24 03:23:45.374] ubi0:dml_code is mounted. [2025-09-24 03:23:45.390] RTNETLINK answers: File exists [2025-09-24 03:23:45.390] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:23:45.428] ubi1:textures is mounted. [2025-09-24 03:23:45.428] ubi2:animations is mounted. [2025-09-24 03:23:45.428] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:23:45.428] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:23:45.428] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:23:45.428] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:23:45.451] data.LB_FadeInType0=100 [2025-09-24 03:23:45.451] data.CHLH_FadeInType0=0 [2025-09-24 03:23:45.451] data.WU_FadeInDelay=0 [2025-09-24 03:23:45.451] max_time_out=0 [2025-09-24 03:23:45.451] No splash screen [2025-09-24 03:23:45.451] stop dss Done [2025-09-24 03:23:45.483] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:23:45.499] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:23:45.537] /dev/mem opened. [2025-09-24 03:23:45.537] Memory mapped at address 0xffff94fd8000. [2025-09-24 03:23:45.537] Read at address 0x00600018 (0xffff94fd8018): 0x00000000 [2025-09-24 03:23:45.537] Write at address 0x00600018 (0xffff94fd8018): 0x00400040, readback 0x00400040 [2025-09-24 03:23:45.616] Loaded PowerVR consumer services. [2025-09-24 03:23:45.745] 512+0 records in [2025-09-24 03:23:45.745] 512+0 records out [2025-09-24 03:23:45.761] Waiting data available... [2025-09-24 03:23:45.793] Starting syslogd/klogd: done [2025-09-24 03:23:45.809] DML Start [2025-09-24 03:23:46.000] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:23:46.256] DML res1: 0 [2025-09-24 03:23:46.630] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:23:46.630] Read Success [2025-09-24 03:23:46.630] Verifying certificate... [2025-09-24 03:23:46.886] Verified OK [2025-09-24 03:23:46.902] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:23:48.497] Verified OK [2025-09-24 03:23:48.497] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:23:49.100] Verified OK [2025-09-24 03:23:49.100] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:23:51.786] fs.protected_hardlinks = 1 [2025-09-24 03:23:51.802] fs.protected_symlinks = 1 [2025-09-24 03:23:51.802] kernel.modules_disabled = 1 [2025-09-24 03:23:51.994] [2025-09-24 03:23:51.994] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:23:53.309] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:24:01.126] SBL1:1210.0.1.0 [2025-09-24 03:24:01.158] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:24:02.740] SBL2:1210.0.1.0 [2025-09-24 03:24:02.772] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:24:02.884] j-A [2025-09-24 03:24:10.224] The R5 Autosar Classic is running [2025-09-24 03:24:10.249] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:24:10.249] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:24:10.857] INIT: version 2.96 booting [2025-09-24 03:24:10.969] INIT: Entering runlevel: 5 [2025-09-24 03:24:11.129] mtd24 attached [2025-09-24 03:24:11.145] mtd32 attached [2025-09-24 03:24:11.145] mtd28 attached [2025-09-24 03:24:11.193] RTNETLINK answers: File exists [2025-09-24 03:24:11.260] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:24:11.260] ubi0:textures is mounted. [2025-09-24 03:24:11.260] ubi1:dml_code is mounted. [2025-09-24 03:24:11.260] ubi2:animations is mounted. [2025-09-24 03:24:11.260] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:24:11.260] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:24:11.260] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:24:11.260] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:24:11.260] data.LB_FadeInType0=100 [2025-09-24 03:24:11.260] data.CHLH_FadeInType0=0 [2025-09-24 03:24:11.260] data.WU_FadeInDelay=0 [2025-09-24 03:24:11.260] max_time_out=0 [2025-09-24 03:24:11.260] No splash screen [2025-09-24 03:24:11.260] stop dss Done [2025-09-24 03:24:11.302] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:24:11.302] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:24:11.344] /dev/mem opened. [2025-09-24 03:24:11.344] Memory mapped at address 0xffff903a1000. [2025-09-24 03:24:11.344] Read at address 0x00600018 (0xffff903a1018): 0x00000000 [2025-09-24 03:24:11.344] Write at address 0x00600018 (0xffff903a1018): 0x00400040, readback 0x00400040 [2025-09-24 03:24:11.440] Loaded PowerVR consumer services. [2025-09-24 03:24:11.568] 512+0 records in [2025-09-24 03:24:11.568] 512+0 records out [2025-09-24 03:24:11.583] Waiting data available... [2025-09-24 03:24:11.615] Starting syslogd/klogd: done [2025-09-24 03:24:11.632] DML Start [2025-09-24 03:24:11.759] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:24:11.967] DML res1: 0 [2025-09-24 03:24:12.560] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:24:12.581] Read Success [2025-09-24 03:24:12.581] Verifying certificate... [2025-09-24 03:24:12.804] Verified OK [2025-09-24 03:24:12.820] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:24:14.488] Verified OK [2025-09-24 03:24:14.488] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:24:15.055] Verified OK [2025-09-24 03:24:15.055] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:24:17.581] fs.protected_hardlinks = 1 [2025-09-24 03:24:17.581] fs.protected_symlinks = 1 [2025-09-24 03:24:17.598] kernel.modules_disabled = 1 [2025-09-24 03:24:17.790] [2025-09-24 03:24:17.790] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:24:19.117] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:24:26.917] SBL1:1210.0.1.0 [2025-09-24 03:24:26.965] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:24:28.532] SBL2:1210.0.1.0 [2025-09-24 03:24:28.580] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 03:24:28.676] j-A [2025-09-24 03:24:36.032] The R5 Autosar Classic is running [2025-09-24 03:24:36.032] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:24:36.053] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:24:36.660] INIT: version 2.96 booting [2025-09-24 03:24:36.772] INIT: Entering runlevel: 5 [2025-09-24 03:24:36.932] mtd32 attached [2025-09-24 03:24:36.948] mtd24 attached [2025-09-24 03:24:36.964] mtd28 attached [2025-09-24 03:24:36.980] ubi0:dml_code is mounted. [2025-09-24 03:24:36.996] RTNETLINK answers: File exists [2025-09-24 03:24:37.051] ubi1:textures is mounted. [2025-09-24 03:24:37.051] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:24:37.051] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:24:37.051] ubi2:animations is mounted. [2025-09-24 03:24:37.051] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:24:37.051] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:24:37.051] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:24:37.051] data.LB_FadeInType0=100 [2025-09-24 03:24:37.051] data.CHLH_FadeInType0=0 [2025-09-24 03:24:37.051] data.WU_FadeInDelay=0 [2025-09-24 03:24:37.051] max_time_out=0 [2025-09-24 03:24:37.051] No splash screen [2025-09-24 03:24:37.051] stop dss Done [2025-09-24 03:24:37.126] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:24:37.126] /dev/mem opened. [2025-09-24 03:24:37.126] Memory mapped at address 0xffffb771c000. [2025-09-24 03:24:37.126] Read at address 0x00600018 (0xffffb771c018): 0x00000000 [2025-09-24 03:24:37.126] Write at address 0x00600018 (0xffffb771c018): 0x00400040, readback 0x00400040 [2025-09-24 03:24:37.126] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:24:37.333] Loaded PowerVR consumer services. [2025-09-24 03:24:37.349] 512+0 records in [2025-09-24 03:24:37.349] 512+0 records out [2025-09-24 03:24:37.397] Starting syslogd/klogd: Waiting data available... [2025-09-24 03:24:37.413] done [2025-09-24 03:24:37.413] DML Start [2025-09-24 03:24:37.606] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:24:37.830] DML res1: 0 [2025-09-24 03:24:38.314] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:24:38.314] Read Success [2025-09-24 03:24:38.315] Verifying certificate... [2025-09-24 03:24:38.554] Verified OK [2025-09-24 03:24:38.570] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:24:40.207] Verified OK [2025-09-24 03:24:40.207] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:24:40.869] Verified OK [2025-09-24 03:24:40.869] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:24:43.556] fs.protected_hardlinks = 1 [2025-09-24 03:24:43.571] fs.protected_symlinks = 1 [2025-09-24 03:24:43.571] kernel.modules_disabled = 1 [2025-09-24 03:24:43.763] [2025-09-24 03:24:43.763] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:24:44.930] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:24:52.725] SBL1:1210.0.1.0 [2025-09-24 03:24:52.773] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:24:54.340] SBL2:1210.0.1.0 [2025-09-24 03:24:54.388] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:24:54.483] j-A [2025-09-24 03:25:01.838] The R5 Autosar Classic is running [2025-09-24 03:25:01.860] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:25:01.860] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:25:02.467] INIT: version 2.96 booting [2025-09-24 03:25:02.580] INIT: Entering runlevel: 5 [2025-09-24 03:25:02.723] mtd24 attached [2025-09-24 03:25:02.739] mtd32 attached [2025-09-24 03:25:02.756] mtd28 attached [2025-09-24 03:25:02.772] ubi0:textures is mounted. [2025-09-24 03:25:02.804] RTNETLINK answers: File exists [2025-09-24 03:25:02.804] ubi1:dml_code is mounted. [2025-09-24 03:25:02.829] ubi2:animations is mounted. [2025-09-24 03:25:02.829] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:25:02.829] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:25:02.862] data.LB_FadeInType0=100 [2025-09-24 03:25:02.862] data.CHLH_FadeInType0=0 [2025-09-24 03:25:02.862] data.WU_FadeInDelay=0 [2025-09-24 03:25:02.862] max_time_out=0 [2025-09-24 03:25:02.862] No splash screen [2025-09-24 03:25:02.862] stop dss Done [2025-09-24 03:25:02.862] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:25:02.862] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:25:02.862] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:25:02.927] /dev/mem opened. [2025-09-24 03:25:02.927] Memory mapped at address 0xffff9c459000. [2025-09-24 03:25:02.927] Read at address 0x00600018 (0xffff9c459018): 0x00000000 [2025-09-24 03:25:02.927] Write at address 0x00600018 (0xffff9c459018): 0x00400040, readback 0x00400040 [2025-09-24 03:25:02.927] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:25:02.943] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:25:03.056] Loaded PowerVR consumer services. [2025-09-24 03:25:03.167] Waiting data available... [2025-09-24 03:25:03.183] 512+0 records in [2025-09-24 03:25:03.183] 512+0 records out [2025-09-24 03:25:03.231] Starting syslogd/klogd: done [2025-09-24 03:25:03.247] DML Start [2025-09-24 03:25:03.391] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:25:03.647] DML res1: 0 [2025-09-24 03:25:04.030] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:25:04.030] Read Success [2025-09-24 03:25:04.030] Verifying certificate... [2025-09-24 03:25:04.254] Verified OK [2025-09-24 03:25:04.270] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:25:05.901] Verified OK [2025-09-24 03:25:05.917] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:25:06.565] Verified OK [2025-09-24 03:25:06.565] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:25:09.171] fs.protected_hardlinks = 1 [2025-09-24 03:25:09.171] fs.protected_symlinks = 1 [2025-09-24 03:25:09.187] kernel.modules_disabled = 1 [2025-09-24 03:25:09.378] [2025-09-24 03:25:09.378] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:25:10.738] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:25:18.542] SBL1:1210.0.1.0 [2025-09-24 03:25:18.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:25:20.156] SBL2:1210.0.1.0 [2025-09-24 03:25:20.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:25:20.299] j-A [2025-09-24 03:25:27.653] The R5 Autosar Classic is running [2025-09-24 03:25:27.653] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:25:27.674] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:25:28.282] INIT: version 2.96 booting [2025-09-24 03:25:28.394] INIT: Entering runlevel: 5 [2025-09-24 03:25:28.538] mtd28 attached [2025-09-24 03:25:28.554] mtd24 attached [2025-09-24 03:25:28.570] mtd32 attached [2025-09-24 03:25:28.602] ubi0:animations is mounted. [2025-09-24 03:25:28.618] RTNETLINK answers: File exists [2025-09-24 03:25:28.618] ubi1:textures is mounted. [2025-09-24 03:25:28.677] ubi2:dml_code is mounted. [2025-09-24 03:25:28.677] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:25:28.677] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:25:28.677] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:25:28.677] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:25:28.677] data.LB_FadeInType0=100 [2025-09-24 03:25:28.677] data.CHLH_FadeInType0=0 [2025-09-24 03:25:28.677] data.WU_FadeInDelay=0 [2025-09-24 03:25:28.677] max_time_out=0 [2025-09-24 03:25:28.677] No splash screen [2025-09-24 03:25:28.677] stop dss Done [2025-09-24 03:25:28.677] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:25:28.769] /dev/mem opened. [2025-09-24 03:25:28.769] Memory mapped at address 0xffffa4b4c000. [2025-09-24 03:25:28.769] Read at address 0x00600018 (0xffffa4b4c018): 0x00000000 [2025-09-24 03:25:28.769] Write at address 0x00600018 (0xffffa4b4c018): 0x00400040, readback 0x00400040 [2025-09-24 03:25:28.769] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:25:28.769] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:25:28.929] Loaded PowerVR consumer services. [2025-09-24 03:25:28.945] 512+0 records in [2025-09-24 03:25:28.961] 512+0 records out [2025-09-24 03:25:29.009] Starting syslogd/klogd: done [2025-09-24 03:25:29.105] Waiting data available... [2025-09-24 03:25:29.105] DML Start [2025-09-24 03:25:29.281] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:25:29.472] DML res1: 0 [2025-09-24 03:25:29.918] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:25:29.918] Read Success [2025-09-24 03:25:29.918] Verifying certificate... [2025-09-24 03:25:30.126] Verified OK [2025-09-24 03:25:30.142] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:25:31.837] Verified OK [2025-09-24 03:25:31.837] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:25:32.423] Verified OK [2025-09-24 03:25:32.423] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:25:34.997] fs.protected_hardlinks = 1 [2025-09-24 03:25:34.997] fs.protected_symlinks = 1 [2025-09-24 03:25:35.014] kernel.modules_disabled = 1 [2025-09-24 03:25:35.205] [2025-09-24 03:25:35.205] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:25:36.514] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:25:44.374] SBL1:1210.0.1.0 [2025-09-24 03:25:44.406] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:25:45.989] SBL2:1210.0.1.0 [2025-09-24 03:25:46.021] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:25:46.132] j-A [2025-09-24 03:25:53.502] The R5 Autosar Classic is running [2025-09-24 03:25:53.502] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:25:53.502] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:25:54.110] INIT: version 2.96 booting [2025-09-24 03:25:54.221] INIT: Entering runlevel: 5 [2025-09-24 03:25:54.382] mtd24 attached [2025-09-24 03:25:54.382] mtd28 attached [2025-09-24 03:25:54.414] mtd32 attached [2025-09-24 03:25:54.445] ubi0:textures is mounted. [2025-09-24 03:25:54.514] RTNETLINK answers: File exists [2025-09-24 03:25:54.514] ubi1:animations is mounted. [2025-09-24 03:25:54.514] ubi2:dml_code is mounted. [2025-09-24 03:25:54.514] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:25:54.514] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:25:54.514] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:25:54.514] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:25:54.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:25:54.514] data.LB_FadeInType0=100 [2025-09-24 03:25:54.514] data.CHLH_FadeInType0=0 [2025-09-24 03:25:54.514] data.WU_FadeInDelay=0 [2025-09-24 03:25:54.514] max_time_out=0 [2025-09-24 03:25:54.514] No splash screen [2025-09-24 03:25:54.514] stop dss Done [2025-09-24 03:25:54.578] /dev/mem opened. [2025-09-24 03:25:54.578] Memory mapped at address 0xffff7f7dc000. [2025-09-24 03:25:54.610] Read at address 0x00600018 (0xffff7f7dc018): 0x00000000 [2025-09-24 03:25:54.610] Write at address 0x00600018 (0xffff7f7dc018): 0x00400040, readback 0x00400040 [2025-09-24 03:25:54.610] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:25:54.610] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:25:54.674] Loaded PowerVR consumer services. [2025-09-24 03:25:54.802] 512+0 records in [2025-09-24 03:25:54.802] 512+0 records out [2025-09-24 03:25:54.834] Waiting data available... [2025-09-24 03:25:54.850] Starting syslogd/klogd: done [2025-09-24 03:25:54.866] DML Start [2025-09-24 03:25:55.057] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:25:55.281] DML res1: 0 [2025-09-24 03:25:55.712] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:25:55.712] Read Success [2025-09-24 03:25:55.712] Verifying certificate... [2025-09-24 03:25:55.920] Verified OK [2025-09-24 03:25:55.936] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:25:57.598] Verified OK [2025-09-24 03:25:57.598] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:25:58.205] Verified OK [2025-09-24 03:25:58.205] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:26:00.809] fs.protected_hardlinks = 1 [2025-09-24 03:26:00.809] fs.protected_symlinks = 1 [2025-09-24 03:26:00.809] kernel.modules_disabled = 1 [2025-09-24 03:26:00.984] [2025-09-24 03:26:00.984] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:26:02.398] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:26:10.171] SBL1:1210.0.1.0 [2025-09-24 03:26:10.203] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:26:11.785] SBL2:1210.0.1.0 [2025-09-24 03:26:11.817] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:26:11.913] j-A [2025-09-24 03:26:19.266] The R5 Autosar Classic is running [2025-09-24 03:26:19.291] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:26:19.291] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:26:19.899] INIT: version 2.96 booting [2025-09-24 03:26:20.010] INIT: Entering runlevel: 5 [2025-09-24 03:26:20.170] mtd28 attached [2025-09-24 03:26:20.170] mtd24 attached [2025-09-24 03:26:20.186] mtd32 attached [2025-09-24 03:26:20.218] ubi0:animations is mounted. [2025-09-24 03:26:20.234] RTNETLINK answers: File exists [2025-09-24 03:26:20.274] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:26:20.274] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:26:20.274] ubi1:textures is mounted. [2025-09-24 03:26:20.274] ubi2:dml_code is mounted. [2025-09-24 03:26:20.274] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:26:20.274] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:26:20.274] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:26:20.295] data.LB_FadeInType0=100 [2025-09-24 03:26:20.295] data.CHLH_FadeInType0=0 [2025-09-24 03:26:20.295] data.WU_FadeInDelay=0 [2025-09-24 03:26:20.295] max_time_out=0 [2025-09-24 03:26:20.295] No splash screen [2025-09-24 03:26:20.295] stop dss Done [2025-09-24 03:26:20.379] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:26:20.379] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:26:20.379] /dev/mem opened. [2025-09-24 03:26:20.379] Memory mapped at address 0xffffa31c0000. [2025-09-24 03:26:20.379] Read at address 0x00600018 (0xffffa31c0018): 0x00000000 [2025-09-24 03:26:20.379] Write at address 0x00600018 (0xffffa31c0018): 0x00400040, readback 0x00400040 [2025-09-24 03:26:20.539] Loaded PowerVR consumer services. [2025-09-24 03:26:20.571] 512+0 records in [2025-09-24 03:26:20.587] 512+0 records out [2025-09-24 03:26:20.635] Starting syslogd/klogd: done [2025-09-24 03:26:20.667] Waiting data available... [2025-09-24 03:26:20.667] DML Start [2025-09-24 03:26:20.859] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:26:21.083] DML res1: 0 [2025-09-24 03:26:21.540] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:26:21.541] Read Success [2025-09-24 03:26:21.541] Verifying certificate... [2025-09-24 03:26:21.780] Verified OK [2025-09-24 03:26:21.796] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:26:23.515] Verified OK [2025-09-24 03:26:23.515] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:26:24.086] Verified OK [2025-09-24 03:26:24.086] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:26:26.597] fs.protected_hardlinks = 1 [2025-09-24 03:26:26.597] fs.protected_symlinks = 1 [2025-09-24 03:26:26.613] kernel.modules_disabled = 1 [2025-09-24 03:26:26.804] [2025-09-24 03:26:26.804] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:26:28.143] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:26:35.989] SBL1:1210.0.1.0 [2025-09-24 03:26:36.021] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:26:37.604] SBL2:1210.0.1.0 [2025-09-24 03:26:37.636] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 03:26:37.748] j-A [2025-09-24 03:26:45.118] The R5 Autosar Classic is running [2025-09-24 03:26:45.118] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:26:45.118] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:26:45.726] INIT: version 2.96 booting [2025-09-24 03:26:45.837] INIT: Entering runlevel: 5 [2025-09-24 03:26:45.982] mtd24 attached [2025-09-24 03:26:45.998] mtd32 attached [2025-09-24 03:26:46.013] mtd28 attached [2025-09-24 03:26:46.029] ubi0:textures is mounted. [2025-09-24 03:26:46.061] RTNETLINK answers: File exists [2025-09-24 03:26:46.098] ubi2:animations is mounted. [2025-09-24 03:26:46.098] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:26:46.098] ubi1:dml_code is mounted. [2025-09-24 03:26:46.098] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:26:46.098] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:26:46.098] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:26:46.098] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:26:46.123] data.LB_FadeInType0=100 [2025-09-24 03:26:46.123] data.CHLH_FadeInType0=0 [2025-09-24 03:26:46.123] data.WU_FadeInDelay=0 [2025-09-24 03:26:46.123] max_time_out=0 [2025-09-24 03:26:46.123] No splash screen [2025-09-24 03:26:46.123] stop dss Done [2025-09-24 03:26:46.155] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:26:46.195] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:26:46.195] /dev/mem opened. [2025-09-24 03:26:46.195] Memory mapped at address 0xffff801bf000. [2025-09-24 03:26:46.196] Read at address 0x00600018 (0xffff801bf018): 0x00000000 [2025-09-24 03:26:46.196] Write at address 0x00600018 (0xffff801bf018): 0x00400040, readback 0x00400040 [2025-09-24 03:26:46.420] Loaded PowerVR consumer services. [2025-09-24 03:26:46.436] 512+0 records in [2025-09-24 03:26:46.436] 512+0 records out [2025-09-24 03:26:46.468] Waiting data available... [2025-09-24 03:26:46.483] Starting syslogd/klogd: done [2025-09-24 03:26:46.499] DML Start [2025-09-24 03:26:46.660] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:26:46.900] DML res1: 0 [2025-09-24 03:26:47.372] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:26:47.372] Read Success [2025-09-24 03:26:47.372] Verifying certificate... [2025-09-24 03:26:47.644] Verified OK [2025-09-24 03:26:47.660] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:26:49.343] Verified OK [2025-09-24 03:26:49.343] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:26:49.992] Verified OK [2025-09-24 03:26:49.992] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:26:52.646] fs.protected_hardlinks = 1 [2025-09-24 03:26:52.662] fs.protected_symlinks = 1 [2025-09-24 03:26:52.662] kernel.modules_disabled = 1 [2025-09-24 03:26:52.870] [2025-09-24 03:26:52.870] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:26:53.986] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:27:01.770] SBL1:1210.0.1.0 [2025-09-24 03:27:01.802] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:27:03.386] SBL2:1210.0.1.0 [2025-09-24 03:27:03.418] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:27:03.529] j-A [2025-09-24 03:27:10.900] The R5 Autosar Classic is running [2025-09-24 03:27:10.900] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:27:10.900] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:27:11.507] INIT: version 2.96 booting [2025-09-24 03:27:11.603] INIT: Entering runlevel: 5 [2025-09-24 03:27:11.763] mtd32 attached [2025-09-24 03:27:11.779] mtd24 attached [2025-09-24 03:27:11.795] mtd28 attached [2025-09-24 03:27:11.827] ubi0:dml_code is mounted. [2025-09-24 03:27:11.899] RTNETLINK answers: File exists [2025-09-24 03:27:11.899] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:27:11.899] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:27:11.899] ubi1:textures is mounted. [2025-09-24 03:27:11.899] ubi2:animations is mounted. [2025-09-24 03:27:11.899] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:27:11.899] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:27:11.899] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:27:11.899] data.LB_FadeInType0=100 [2025-09-24 03:27:11.899] data.CHLH_FadeInType0=0 [2025-09-24 03:27:11.899] data.WU_FadeInDelay=0 [2025-09-24 03:27:11.899] max_time_out=0 [2025-09-24 03:27:11.899] No splash screen [2025-09-24 03:27:11.899] stop dss Done [2025-09-24 03:27:11.942] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:27:11.942] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:27:11.980] /dev/mem opened. [2025-09-24 03:27:11.980] Memory mapped at address 0xffff9cb01000. [2025-09-24 03:27:11.980] Read at address 0x00600018 (0xffff9cb01018): 0x00000000 [2025-09-24 03:27:11.980] Write at address 0x00600018 (0xffff9cb01018): 0x00400040, readback 0x00400040 [2025-09-24 03:27:12.045] Loaded PowerVR consumer services. [2025-09-24 03:27:12.188] Waiting data available... [2025-09-24 03:27:12.204] 512+0 records in [2025-09-24 03:27:12.204] 512+0 records out [2025-09-24 03:27:12.253] Starting syslogd/klogd: done [2025-09-24 03:27:12.269] DML Start [2025-09-24 03:27:12.461] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:27:12.717] DML res1: 0 [2025-09-24 03:27:13.113] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:27:13.113] Read Success [2025-09-24 03:27:13.113] Verifying certificate... [2025-09-24 03:27:13.369] Verified OK [2025-09-24 03:27:13.385] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:27:15.085] Verified OK [2025-09-24 03:27:15.085] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:27:15.769] Verified OK [2025-09-24 03:27:15.769] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:27:18.406] fs.protected_hardlinks = 1 [2025-09-24 03:27:18.422] fs.protected_symlinks = 1 [2025-09-24 03:27:18.422] kernel.modules_disabled = 1 [2025-09-24 03:27:18.630] [2025-09-24 03:27:18.630] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:27:19.791] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:27:27.573] SBL1:1210.0.1.0 [2025-09-24 03:27:27.605] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:27:29.187] SBL2:1210.0.1.0 [2025-09-24 03:27:29.220] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:27:29.316] j-A [2025-09-24 03:27:36.671] The R5 Autosar Classic is running [2025-09-24 03:27:36.695] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:27:36.695] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:27:37.303] INIT: version 2.96 booting [2025-09-24 03:27:37.398] INIT: Entering runlevel: 5 [2025-09-24 03:27:37.558] mtd24 attached [2025-09-24 03:27:37.574] mtd28 attached [2025-09-24 03:27:37.590] mtd32 attached [2025-09-24 03:27:37.606] ubi0:textures is mounted. [2025-09-24 03:27:37.689] ubi1:animations is mounted. [2025-09-24 03:27:37.689] RTNETLINK answers: File exists [2025-09-24 03:27:37.689] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:27:37.689] ubi2:dml_code is mounted. [2025-09-24 03:27:37.689] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:27:37.689] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:27:37.689] data.LB_FadeInType0=100 [2025-09-24 03:27:37.689] data.CHLH_FadeInType0=0 [2025-09-24 03:27:37.689] data.WU_FadeInDelay=0 [2025-09-24 03:27:37.689] max_time_out=0 [2025-09-24 03:27:37.689] No splash screen [2025-09-24 03:27:37.689] stop dss Done [2025-09-24 03:27:37.689] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:27:37.689] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:27:37.720] /dev/mem opened. [2025-09-24 03:27:37.758] Memory mapped at address 0xffff8c640000. [2025-09-24 03:27:37.758] Read at address 0x00600018 (0xffff8c640018): 0x00000000 [2025-09-24 03:27:37.758] Write at address 0x00600018 (0xffff8c640018): 0x00400040, readback 0x00400040 [2025-09-24 03:27:37.758] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:27:37.758] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:27:37.869] Loaded PowerVR consumer services. [2025-09-24 03:27:37.998] 512+0 records in [2025-09-24 03:27:37.998] 512+0 records out [2025-09-24 03:27:37.998] Waiting data available... [2025-09-24 03:27:38.029] Starting syslogd/klogd: done [2025-09-24 03:27:38.045] DML Start [2025-09-24 03:27:38.237] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:27:38.445] DML res1: 0 [2025-09-24 03:27:38.924] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:27:38.946] Read Success [2025-09-24 03:27:38.946] Verifying certificate... [2025-09-24 03:27:39.218] Verified OK [2025-09-24 03:27:39.218] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:27:40.828] Verified OK [2025-09-24 03:27:40.828] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:27:41.436] Verified OK [2025-09-24 03:27:41.436] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:27:44.010] fs.protected_hardlinks = 1 [2025-09-24 03:27:44.026] fs.protected_symlinks = 1 [2025-09-24 03:27:44.026] kernel.modules_disabled = 1 [2025-09-24 03:27:44.217] [2025-09-24 03:27:44.217] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:27:45.554] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:27:53.370] SBL1:1210.0.1.0 [2025-09-24 03:27:53.418] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:27:54.985] SBL2:1210.0.1.0 [2025-09-24 03:27:55.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:27:55.129] j-A [2025-09-24 03:28:02.502] The R5 Autosar Classic is running [2025-09-24 03:28:02.502] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:28:02.502] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:28:03.110] INIT: version 2.96 booting [2025-09-24 03:28:03.221] INIT: Entering runlevel: 5 [2025-09-24 03:28:03.365] mtd28 attached [2025-09-24 03:28:03.381] mtd32 attached [2025-09-24 03:28:03.397] mtd24 attached [2025-09-24 03:28:03.430] ubi0:animations is mounted. [2025-09-24 03:28:03.446] ubi1:dml_code is mounted. [2025-09-24 03:28:03.446] RTNETLINK answers: File exists [2025-09-24 03:28:03.501] ubi2:textures is mounted. [2025-09-24 03:28:03.501] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:28:03.501] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:28:03.501] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:28:03.501] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:28:03.501] data.LB_FadeInType0=100 [2025-09-24 03:28:03.501] data.CHLH_FadeInType0=0 [2025-09-24 03:28:03.501] data.WU_FadeInDelay=0 [2025-09-24 03:28:03.501] max_time_out=0 [2025-09-24 03:28:03.501] No splash screen [2025-09-24 03:28:03.501] stop dss Done [2025-09-24 03:28:03.501] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:28:03.548] /dev/mem opened. [2025-09-24 03:28:03.548] Memory mapped at address 0xffff9bd1f000. [2025-09-24 03:28:03.574] Read at address 0x00600018 (0xffff9bd1f018): 0x00000000 [2025-09-24 03:28:03.574] Write at address 0x00600018 (0xffff9bd1f018): 0x00400040, readback 0x00400040 [2025-09-24 03:28:03.574] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:28:03.590] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:28:03.750] Loaded PowerVR consumer services. [2025-09-24 03:28:03.798] 512+0 records in [2025-09-24 03:28:03.798] 512+0 records out [2025-09-24 03:28:03.814] Waiting data available... [2025-09-24 03:28:03.846] Starting syslogd/klogd: done [2025-09-24 03:28:03.862] DML Start [2025-09-24 03:28:04.022] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:28:04.262] DML res1: 0 [2025-09-24 03:28:04.708] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:28:04.708] Read Success [2025-09-24 03:28:04.708] Verifying certificate... [2025-09-24 03:28:04.948] Verified OK [2025-09-24 03:28:04.948] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:28:06.604] Verified OK [2025-09-24 03:28:06.604] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:28:07.243] Verified OK [2025-09-24 03:28:07.259] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:28:10.071] fs.protected_hardlinks = 1 [2025-09-24 03:28:10.071] fs.protected_symlinks = 1 [2025-09-24 03:28:10.071] kernel.modules_disabled = 1 [2025-09-24 03:28:10.262] [2025-09-24 03:28:10.262] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:28:11.381] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:28:19.175] SBL1:1210.0.1.0 [2025-09-24 03:28:19.223] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:28:20.790] SBL2:1210.0.1.0 [2025-09-24 03:28:20.822] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:28:20.934] j-A [2025-09-24 03:28:28.306] The R5 Autosar Classic is running [2025-09-24 03:28:28.306] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:28:28.306] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:28:28.914] INIT: version 2.96 booting [2025-09-24 03:28:29.010] INIT: Entering runlevel: 5 [2025-09-24 03:28:29.170] mtd28 attached [2025-09-24 03:28:29.186] mtd32 attached [2025-09-24 03:28:29.186] mtd24 attached [2025-09-24 03:28:29.234] ubi0:animations is mounted. [2025-09-24 03:28:29.234] RTNETLINK answers: File exists [2025-09-24 03:28:29.278] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:28:29.278] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:28:29.278] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:28:29.278] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:28:29.278] ubi1:dml_code is mounted. [2025-09-24 03:28:29.278] ubi2:textures is mounted. [2025-09-24 03:28:29.278] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:28:29.307] data.LB_FadeInType0=100 [2025-09-24 03:28:29.307] data.CHLH_FadeInType0=0 [2025-09-24 03:28:29.307] data.WU_FadeInDelay=0 [2025-09-24 03:28:29.307] max_time_out=0 [2025-09-24 03:28:29.307] No splash screen [2025-09-24 03:28:29.307] stop dss Done [2025-09-24 03:28:29.369] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:28:29.369] /dev/mem opened. [2025-09-24 03:28:29.369] Memory mapped at address 0xffff94ad8000. [2025-09-24 03:28:29.369] Read at address 0x00600018 (0xffff94ad8018): 0x00000000 [2025-09-24 03:28:29.369] Write at address 0x00600018 (0xffff94ad8018): 0x00400040, readback 0x00400040 [2025-09-24 03:28:29.369] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:28:29.561] Loaded PowerVR consumer services. [2025-09-24 03:28:29.609] 512+0 records in [2025-09-24 03:28:29.609] 512+0 records out [2025-09-24 03:28:29.641] Starting syslogd/klogd: done [2025-09-24 03:28:29.657] Waiting data available... [2025-09-24 03:28:29.657] DML Start [2025-09-24 03:28:29.848] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:28:30.056] DML res1: 0 [2025-09-24 03:28:30.565] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:28:30.565] Read Success [2025-09-24 03:28:30.565] Verifying certificate... [2025-09-24 03:28:30.805] Verified OK [2025-09-24 03:28:30.821] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:28:32.547] Verified OK [2025-09-24 03:28:32.547] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:28:33.098] Verified OK [2025-09-24 03:28:33.098] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:28:35.528] fs.protected_hardlinks = 1 [2025-09-24 03:28:35.544] fs.protected_symlinks = 1 [2025-09-24 03:28:35.544] kernel.modules_disabled = 1 [2025-09-24 03:28:35.735] [2025-09-24 03:28:35.735] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:28:37.139] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:28:44.972] SBL1:1210.0.1.0 [2025-09-24 03:28:45.020] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:28:46.587] SBL2:1210.0.1.0 [2025-09-24 03:28:46.619] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:28:46.731] j-A [2025-09-24 03:28:54.106] The R5 Autosar Classic is running [2025-09-24 03:28:54.106] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:28:54.106] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:28:54.714] INIT: version 2.96 booting [2025-09-24 03:28:54.826] INIT: Entering runlevel: 5 [2025-09-24 03:28:54.970] mtd24 attached [2025-09-24 03:28:54.985] mtd28 attached [2025-09-24 03:28:55.001] mtd32 attached [2025-09-24 03:28:55.033] ubi0:textures is mounted. [2025-09-24 03:28:55.049] RTNETLINK answers: File exists [2025-09-24 03:28:55.049] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:28:55.103] ubi1:animations is mounted. [2025-09-24 03:28:55.103] ubi2:dml_code is mounted. [2025-09-24 03:28:55.103] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:28:55.103] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:28:55.103] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:28:55.103] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:28:55.103] data.LB_FadeInType0=100 [2025-09-24 03:28:55.103] data.CHLH_FadeInType0=0 [2025-09-24 03:28:55.103] data.WU_FadeInDelay=0 [2025-09-24 03:28:55.103] max_time_out=0 [2025-09-24 03:28:55.103] No splash screen [2025-09-24 03:28:55.103] stop dss Done [2025-09-24 03:28:55.188] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:28:55.188] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:28:55.188] /dev/mem opened. [2025-09-24 03:28:55.188] Memory mapped at address 0xffff9a899000. [2025-09-24 03:28:55.188] Read at address 0x00600018 (0xffff9a899018): 0x00000000 [2025-09-24 03:28:55.188] Write at address 0x00600018 (0xffff9a899018): 0x00400040, readback 0x00400040 [2025-09-24 03:28:55.331] Loaded PowerVR consumer services. [2025-09-24 03:28:55.411] 512+0 records in [2025-09-24 03:28:55.411] 512+0 records out [2025-09-24 03:28:55.443] Waiting data available... [2025-09-24 03:28:55.459] Starting syslogd/klogd: done [2025-09-24 03:28:55.475] DML Start [2025-09-24 03:28:55.667] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:28:55.907] DML res1: 0 [2025-09-24 03:28:56.323] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:28:56.350] Read Success [2025-09-24 03:28:56.350] Verifying certificate... [2025-09-24 03:28:56.606] Verified OK [2025-09-24 03:28:56.638] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:28:58.362] Verified OK [2025-09-24 03:28:58.362] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:28:58.993] Verified OK [2025-09-24 03:28:58.993] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:29:01.647] fs.protected_hardlinks = 1 [2025-09-24 03:29:01.663] fs.protected_symlinks = 1 [2025-09-24 03:29:01.663] kernel.modules_disabled = 1 [2025-09-24 03:29:01.855] [2025-09-24 03:29:01.855] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:29:03.001] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:29:10.761] SBL1:1210.0.1.0 [2025-09-24 03:29:10.792] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:29:12.375] SBL2:1210.0.1.0 [2025-09-24 03:29:12.407] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:29:12.518] j-A [2025-09-24 03:29:19.857] The R5 Autosar Classic is running [2025-09-24 03:29:19.888] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:29:19.888] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:29:20.496] INIT: version 2.96 booting [2025-09-24 03:29:20.607] INIT: Entering runlevel: 5 [2025-09-24 03:29:20.752] mtd24 attached [2025-09-24 03:29:20.768] mtd28 attached [2025-09-24 03:29:20.784] mtd32 attached [2025-09-24 03:29:20.816] ubi0:textures is mounted. [2025-09-24 03:29:20.891] RTNETLINK answers: File exists [2025-09-24 03:29:20.891] ubi2:dml_code is mounted. [2025-09-24 03:29:20.891] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:29:20.891] ubi1:animations is mounted. [2025-09-24 03:29:20.891] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:29:20.891] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:29:20.891] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:29:20.891] data.LB_FadeInType0=100 [2025-09-24 03:29:20.891] data.CHLH_FadeInType0=0 [2025-09-24 03:29:20.891] data.WU_FadeInDelay=0 [2025-09-24 03:29:20.891] max_time_out=0 [2025-09-24 03:29:20.891] No splash screen [2025-09-24 03:29:20.891] stop dss Done [2025-09-24 03:29:20.891] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:29:20.938] /dev/mem opened. [2025-09-24 03:29:20.938] Memory mapped at address 0xffffbdb0f000. [2025-09-24 03:29:20.970] Read at address 0x00600018 (0xffffbdb0f018): 0x00000000 [2025-09-24 03:29:20.970] Write at address 0x00600018 (0xffffbdb0f018): 0x00400040, readback 0x00400040 [2025-09-24 03:29:20.970] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:29:20.970] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:29:21.178] Loaded PowerVR consumer services. [2025-09-24 03:29:21.240] 512+0 records in [2025-09-24 03:29:21.240] 512+0 records out [2025-09-24 03:29:21.240] Waiting data available... [2025-09-24 03:29:21.288] Starting syslogd/klogd: done [2025-09-24 03:29:21.304] DML Start [2025-09-24 03:29:21.464] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:29:21.752] DML res1: 0 [2025-09-24 03:29:22.113] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:29:22.113] Read Success [2025-09-24 03:29:22.113] Verifying certificate... [2025-09-24 03:29:22.336] Verified OK [2025-09-24 03:29:22.352] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:29:24.045] Verified OK [2025-09-24 03:29:24.045] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:29:24.668] Verified OK [2025-09-24 03:29:24.668] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:29:27.211] fs.protected_hardlinks = 1 [2025-09-24 03:29:27.227] fs.protected_symlinks = 1 [2025-09-24 03:29:27.227] kernel.modules_disabled = 1 [2025-09-24 03:29:27.418] [2025-09-24 03:29:27.418] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:29:28.824] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:29:36.570] SBL1:1210.0.1.0 [2025-09-24 03:29:36.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:29:38.185] SBL2:1210.0.1.0 [2025-09-24 03:29:38.217] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:29:38.313] j-A [2025-09-24 03:29:45.666] The R5 Autosar Classic is running [2025-09-24 03:29:45.691] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:29:45.691] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:29:46.299] INIT: version 2.96 booting [2025-09-24 03:29:46.410] INIT: Entering runlevel: 5 [2025-09-24 03:29:46.571] mtd28 attached [2025-09-24 03:29:46.571] mtd24 attached [2025-09-24 03:29:46.602] mtd32 attached [2025-09-24 03:29:46.618] ubi0:animations is mounted. [2025-09-24 03:29:46.706] RTNETLINK answers: File exists [2025-09-24 03:29:46.706] ubi1:textures is mounted. [2025-09-24 03:29:46.706] ubi2:dml_code is mounted. [2025-09-24 03:29:46.706] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:29:46.706] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:29:46.706] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:29:46.706] data.LB_FadeInType0=100 [2025-09-24 03:29:46.706] data.CHLH_FadeInType0=0 [2025-09-24 03:29:46.706] data.WU_FadeInDelay=0 [2025-09-24 03:29:46.706] max_time_out=0 [2025-09-24 03:29:46.706] No splash screen [2025-09-24 03:29:46.706] stop dss Done [2025-09-24 03:29:46.706] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:29:46.706] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:29:46.739] /dev/mem opened. [2025-09-24 03:29:46.765] Memory mapped at address 0xffff8f3e6000. [2025-09-24 03:29:46.765] Read at address 0x00600018 (0xffff8f3e6018): 0x00000000 [2025-09-24 03:29:46.765] Write at address 0x00600018 (0xffff8f3e6018): 0x00400040, readback 0x00400040 [2025-09-24 03:29:46.780] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:29:46.796] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:29:46.925] Loaded PowerVR consumer services. [2025-09-24 03:29:47.020] Waiting data available... [2025-09-24 03:29:47.036] 512+0 records in [2025-09-24 03:29:47.036] 512+0 records out [2025-09-24 03:29:47.052] Starting syslogd/klogd: done [2025-09-24 03:29:47.068] DML Start [2025-09-24 03:29:47.244] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:29:47.468] DML res1: 0 [2025-09-24 03:29:47.932] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:29:47.948] Read Success [2025-09-24 03:29:47.948] Verifying certificate... [2025-09-24 03:29:48.187] Verified OK [2025-09-24 03:29:48.203] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:29:49.867] Verified OK [2025-09-24 03:29:49.883] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:29:50.537] Verified OK [2025-09-24 03:29:50.537] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:29:53.174] fs.protected_hardlinks = 1 [2025-09-24 03:29:53.174] fs.protected_symlinks = 1 [2025-09-24 03:29:53.190] kernel.modules_disabled = 1 [2025-09-24 03:29:53.367] [2025-09-24 03:29:53.367] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:29:54.582] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:30:02.363] SBL1:1210.0.1.0 [2025-09-24 03:30:02.411] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:30:03.977] SBL2:1210.0.1.0 [2025-09-24 03:30:04.009] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:30:04.122] j-A [2025-09-24 03:30:11.496] The R5 Autosar Classic is running [2025-09-24 03:30:11.496] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:30:11.496] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:30:12.103] INIT: version 2.96 booting [2025-09-24 03:30:12.215] INIT: Entering runlevel: 5 [2025-09-24 03:30:12.359] mtd28 attached [2025-09-24 03:30:12.375] mtd24 attached [2025-09-24 03:30:12.391] mtd32 attached [2025-09-24 03:30:12.476] RTNETLINK answers: File exists [2025-09-24 03:30:12.476] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:30:12.476] ubi0:animations is mounted. [2025-09-24 03:30:12.476] ubi1:textures is mounted. [2025-09-24 03:30:12.476] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:30:12.476] ubi2:dml_code is mounted. [2025-09-24 03:30:12.476] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:30:12.476] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:30:12.476] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:30:12.501] data.LB_FadeInType0=100 [2025-09-24 03:30:12.501] data.CHLH_FadeInType0=0 [2025-09-24 03:30:12.501] data.WU_FadeInDelay=0 [2025-09-24 03:30:12.501] max_time_out=0 [2025-09-24 03:30:12.501] No splash screen [2025-09-24 03:30:12.501] stop dss Done [2025-09-24 03:30:12.533] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:30:12.585] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:30:12.585] /dev/mem opened. [2025-09-24 03:30:12.585] Memory mapped at address 0xffffbe2b4000. [2025-09-24 03:30:12.585] Read at address 0x00600018 (0xffffbe2b4018): 0x00000000 [2025-09-24 03:30:12.585] Write at address 0x00600018 (0xffffbe2b4018): 0x00400040, readback 0x00400040 [2025-09-24 03:30:12.665] Loaded PowerVR consumer services. [2025-09-24 03:30:12.793] 512+0 records in [2025-09-24 03:30:12.793] 512+0 records out [2025-09-24 03:30:12.809] Waiting data available... [2025-09-24 03:30:12.840] Starting syslogd/klogd: done [2025-09-24 03:30:12.856] DML Start [2025-09-24 03:30:13.048] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:30:13.257] DML res1: 0 [2025-09-24 03:30:13.734] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:30:13.734] Read Success [2025-09-24 03:30:13.734] Verifying certificate... [2025-09-24 03:30:14.021] Verified OK [2025-09-24 03:30:14.037] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:30:15.724] Verified OK [2025-09-24 03:30:15.724] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:30:16.338] Verified OK [2025-09-24 03:30:16.338] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:30:19.008] fs.protected_hardlinks = 1 [2025-09-24 03:30:19.024] fs.protected_symlinks = 1 [2025-09-24 03:30:19.024] kernel.modules_disabled = 1 [2025-09-24 03:30:19.232] [2025-09-24 03:30:19.232] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:30:20.360] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:30:28.162] SBL1:1210.0.1.0 [2025-09-24 03:30:28.210] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:30:29.777] SBL2:1210.0.1.0 [2025-09-24 03:30:29.809] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:30:29.920] j-A [2025-09-24 03:30:37.274] The R5 Autosar Classic is running [2025-09-24 03:30:37.274] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:30:37.295] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:30:37.903] INIT: version 2.96 booting [2025-09-24 03:30:38.014] INIT: Entering runlevel: 5 [2025-09-24 03:30:38.174] mtd24 attached [2025-09-24 03:30:38.174] mtd28 attached [2025-09-24 03:30:38.190] mtd32 attached [2025-09-24 03:30:38.238] ubi0:textures is mounted. [2025-09-24 03:30:38.238] RTNETLINK answers: File exists [2025-09-24 03:30:38.305] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:30:38.305] ubi1:animations is mounted. [2025-09-24 03:30:38.305] ubi2:dml_code is mounted. [2025-09-24 03:30:38.305] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:30:38.305] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:30:38.305] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:30:38.305] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:30:38.305] data.LB_FadeInType0=100 [2025-09-24 03:30:38.305] data.CHLH_FadeInType0=0 [2025-09-24 03:30:38.305] data.WU_FadeInDelay=0 [2025-09-24 03:30:38.305] max_time_out=0 [2025-09-24 03:30:38.305] No splash screen [2025-09-24 03:30:38.305] stop dss Done [2025-09-24 03:30:38.381] /dev/mem opened. [2025-09-24 03:30:38.381] Memory mapped at address 0xffff8912a000. [2025-09-24 03:30:38.381] Read at address 0x00600018 (0xffff8912a018): 0x00000000 [2025-09-24 03:30:38.381] Write at address 0x00600018 (0xffff8912a018): 0x00400040, readback 0x00400040 [2025-09-24 03:30:38.381] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:30:38.381] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:30:38.525] Loaded PowerVR consumer services. [2025-09-24 03:30:38.605] 512+0 records in [2025-09-24 03:30:38.605] 512+0 records out [2025-09-24 03:30:38.637] Waiting data available... [2025-09-24 03:30:38.653] Starting syslogd/klogd: done [2025-09-24 03:30:38.685] DML Start [2025-09-24 03:30:38.860] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:30:39.052] DML res1: 0 [2025-09-24 03:30:39.484] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:30:39.505] Read Success [2025-09-24 03:30:39.505] Verifying certificate... [2025-09-24 03:30:39.745] Verified OK [2025-09-24 03:30:39.777] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:30:41.440] Verified OK [2025-09-24 03:30:41.461] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:30:42.047] Verified OK [2025-09-24 03:30:42.047] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:30:44.573] fs.protected_hardlinks = 1 [2025-09-24 03:30:44.573] fs.protected_symlinks = 1 [2025-09-24 03:30:44.589] kernel.modules_disabled = 1 [2025-09-24 03:30:44.782] [2025-09-24 03:30:44.782] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:30:46.167] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:30:53.979] SBL1:1210.0.1.0 [2025-09-24 03:30:54.010] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:30:55.592] SBL2:1210.0.1.0 [2025-09-24 03:30:55.625] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:30:55.737] j-A [2025-09-24 03:31:03.075] The R5 Autosar Classic is running [2025-09-24 03:31:03.106] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:31:03.106] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:31:03.714] INIT: version 2.96 booting [2025-09-24 03:31:03.809] INIT: Entering runlevel: 5 [2025-09-24 03:31:03.985] mtd24 attached [2025-09-24 03:31:03.985] mtd28 attached [2025-09-24 03:31:04.017] mtd32 attached [2025-09-24 03:31:04.033] ubi0:textures is mounted. [2025-09-24 03:31:04.049] RTNETLINK answers: File exists [2025-09-24 03:31:04.104] ubi1:animations is mounted. [2025-09-24 03:31:04.104] ubi2:dml_code is mounted. [2025-09-24 03:31:04.104] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:31:04.104] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:31:04.104] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:31:04.104] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:31:04.104] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:31:04.104] data.LB_FadeInType0=100 [2025-09-24 03:31:04.104] data.CHLH_FadeInType0=0 [2025-09-24 03:31:04.104] data.WU_FadeInDelay=0 [2025-09-24 03:31:04.104] max_time_out=0 [2025-09-24 03:31:04.104] No splash screen [2025-09-24 03:31:04.104] stop dss Done [2025-09-24 03:31:04.148] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:31:04.148] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:31:04.180] /dev/mem opened. [2025-09-24 03:31:04.180] Memory mapped at address 0xffff881ce000. [2025-09-24 03:31:04.180] Read at address 0x00600018 (0xffff881ce018): 0x00000000 [2025-09-24 03:31:04.180] Write at address 0x00600018 (0xffff881ce018): 0x00400040, readback 0x00400040 [2025-09-24 03:31:04.404] Loaded PowerVR consumer services. [2025-09-24 03:31:04.420] Waiting data available... [2025-09-24 03:31:04.436] 512+0 records in [2025-09-24 03:31:04.436] 512+0 records out [2025-09-24 03:31:04.484] Starting syslogd/klogd: done [2025-09-24 03:31:04.499] DML Start [2025-09-24 03:31:04.707] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:31:04.932] DML res1: 0 [2025-09-24 03:31:05.283] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:31:05.299] Read Success [2025-09-24 03:31:05.299] Verifying certificate... [2025-09-24 03:31:05.538] Verified OK [2025-09-24 03:31:05.538] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:31:07.194] Verified OK [2025-09-24 03:31:07.194] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:31:07.689] Verified OK [2025-09-24 03:31:07.689] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:31:10.455] fs.protected_hardlinks = 1 [2025-09-24 03:31:10.455] fs.protected_symlinks = 1 [2025-09-24 03:31:10.471] kernel.modules_disabled = 1 [2025-09-24 03:31:10.646] [2025-09-24 03:31:10.646] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:31:12.022] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:31:19.767] SBL1:1210.0.1.0 [2025-09-24 03:31:19.815] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:31:21.382] SBL2:1210.0.1.0 [2025-09-24 03:31:21.414] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:31:21.526] j-A [2025-09-24 03:31:28.901] The R5 Autosar Classic is running [2025-09-24 03:31:28.901] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:31:28.901] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:31:29.509] INIT: version 2.96 booting [2025-09-24 03:31:29.621] INIT: Entering runlevel: 5 [2025-09-24 03:31:29.765] mtd24 attached [2025-09-24 03:31:29.781] mtd28 attached [2025-09-24 03:31:29.797] mtd32 attached [2025-09-24 03:31:29.813] ubi0:textures is mounted. [2025-09-24 03:31:29.829] ubi1:animations is mounted. [2025-09-24 03:31:29.845] RTNETLINK answers: File exists [2025-09-24 03:31:29.902] ubi2:dml_code is mounted. [2025-09-24 03:31:29.902] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:31:29.902] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:31:29.902] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:31:29.902] data.LB_FadeInType0=100 [2025-09-24 03:31:29.902] data.CHLH_FadeInType0=0 [2025-09-24 03:31:29.902] data.WU_FadeInDelay=0 [2025-09-24 03:31:29.902] max_time_out=0 [2025-09-24 03:31:29.902] No splash screen [2025-09-24 03:31:29.902] stop dss Done [2025-09-24 03:31:29.902] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:31:29.902] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:31:29.958] /dev/mem opened. [2025-09-24 03:31:29.958] Memory mapped at address 0xffffab2aa000. [2025-09-24 03:31:29.958] Read at address 0x00600018 (0xffffab2aa018): 0x00000000 [2025-09-24 03:31:29.958] Write at address 0x00600018 (0xffffab2aa018): 0x00400040, readback 0x00400040 [2025-09-24 03:31:29.999] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:31:29.999] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:31:30.079] Loaded PowerVR consumer services. [2025-09-24 03:31:30.207] 512+0 records in [2025-09-24 03:31:30.207] 512+0 records out [2025-09-24 03:31:30.223] Waiting data available... [2025-09-24 03:31:30.239] Starting syslogd/klogd: done [2025-09-24 03:31:30.255] DML Start [2025-09-24 03:31:30.447] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:31:30.670] DML res1: 0 [2025-09-24 03:31:31.096] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:31:31.096] Read Success [2025-09-24 03:31:31.096] Verifying certificate... [2025-09-24 03:31:31.319] Verified OK [2025-09-24 03:31:31.351] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:31:33.014] Verified OK [2025-09-24 03:31:33.014] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:31:33.621] Verified OK [2025-09-24 03:31:33.621] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:31:36.195] fs.protected_hardlinks = 1 [2025-09-24 03:31:36.210] fs.protected_symlinks = 1 [2025-09-24 03:31:36.210] kernel.modules_disabled = 1 [2025-09-24 03:31:36.403] [2025-09-24 03:31:36.403] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:31:37.765] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:31:45.598] SBL1:1210.0.1.0 [2025-09-24 03:31:45.630] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:31:47.212] SBL2:1210.0.1.0 [2025-09-24 03:31:47.244] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:31:47.356] j-A [2025-09-24 03:31:54.696] The R5 Autosar Classic is running [2025-09-24 03:31:54.721] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:31:54.721] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:31:55.328] INIT: version 2.96 booting [2025-09-24 03:31:55.440] INIT: Entering runlevel: 5 [2025-09-24 03:31:55.600] mtd32 attached [2025-09-24 03:31:55.616] mtd28 attached [2025-09-24 03:31:55.632] mtd24 attached [2025-09-24 03:31:55.647] ubi0:dml_code is mounted. [2025-09-24 03:31:55.715] RTNETLINK answers: File exists [2025-09-24 03:31:55.715] ubi1:animations is mounted. [2025-09-24 03:31:55.715] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:31:55.715] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:31:55.715] ubi2:textures is mounted. [2025-09-24 03:31:55.715] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:31:55.715] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:31:55.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:31:55.715] data.LB_FadeInType0=100 [2025-09-24 03:31:55.736] data.CHLH_FadeInType0=0 [2025-09-24 03:31:55.736] data.WU_FadeInDelay=0 [2025-09-24 03:31:55.736] max_time_out=0 [2025-09-24 03:31:55.736] No splash screen [2025-09-24 03:31:55.736] stop dss Done [2025-09-24 03:31:55.752] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:31:55.752] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:31:55.784] /dev/mem opened. [2025-09-24 03:31:55.810] Memory mapped at address 0xffff9fffe000. [2025-09-24 03:31:55.810] Read at address 0x00600018 (0xffff9fffe018): 0x00000000 [2025-09-24 03:31:55.810] Write at address 0x00600018 (0xffff9fffe018): 0x00400040, readback 0x00400040 [2025-09-24 03:31:56.002] Loaded PowerVR consumer services. [2025-09-24 03:31:56.049] 512+0 records in [2025-09-24 03:31:56.049] 512+0 records out [2025-09-24 03:31:56.065] Waiting data available... [2025-09-24 03:31:56.082] Starting syslogd/klogd: done [2025-09-24 03:31:56.114] DML Start [2025-09-24 03:31:56.273] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:31:56.529] DML res1: 0 [2025-09-24 03:31:56.897] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:31:56.918] Read Success [2025-09-24 03:31:56.918] Verifying certificate... [2025-09-24 03:31:57.158] Verified OK [2025-09-24 03:31:57.174] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:31:58.880] Verified OK [2025-09-24 03:31:58.880] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:31:59.531] Verified OK [2025-09-24 03:31:59.531] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:32:02.216] fs.protected_hardlinks = 1 [2025-09-24 03:32:02.232] fs.protected_symlinks = 1 [2025-09-24 03:32:02.232] kernel.modules_disabled = 1 [2025-09-24 03:32:02.439] [2025-09-24 03:32:02.439] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:32:03.622] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:32:11.392] SBL1:1210.0.1.0 [2025-09-24 03:32:11.424] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:32:13.007] SBL2:1210.0.1.0 [2025-09-24 03:32:13.039] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:32:13.151] j-A [2025-09-24 03:32:20.491] The R5 Autosar Classic is running [2025-09-24 03:32:20.516] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:32:20.516] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:32:21.123] INIT: version 2.96 booting [2025-09-24 03:32:21.236] INIT: Entering runlevel: 5 [2025-09-24 03:32:21.379] mtd28 attached [2025-09-24 03:32:21.395] mtd32 attached [2025-09-24 03:32:21.395] mtd24 attached [2025-09-24 03:32:21.459] RTNETLINK answers: File exists [2025-09-24 03:32:21.521] ubi0:animations is mounted. [2025-09-24 03:32:21.521] ubi2:textures is mounted. [2025-09-24 03:32:21.521] ubi1:dml_code is mounted. [2025-09-24 03:32:21.521] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:32:21.521] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:32:21.521] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:32:21.521] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:32:21.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:32:21.521] data.LB_FadeInType0=100 [2025-09-24 03:32:21.521] data.CHLH_FadeInType0=0 [2025-09-24 03:32:21.521] data.WU_FadeInDelay=0 [2025-09-24 03:32:21.521] max_time_out=0 [2025-09-24 03:32:21.521] No splash screen [2025-09-24 03:32:21.521] stop dss Done [2025-09-24 03:32:21.562] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:32:21.562] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:32:21.595] /dev/mem opened. [2025-09-24 03:32:21.595] Memory mapped at address 0xffffa4634000. [2025-09-24 03:32:21.595] Read at address 0x00600018 (0xffffa4634018): 0x00000000 [2025-09-24 03:32:21.595] Write at address 0x00600018 (0xffffa4634018): 0x00400040, readback 0x00400040 [2025-09-24 03:32:21.706] Loaded PowerVR consumer services. [2025-09-24 03:32:21.834] Waiting data available... [2025-09-24 03:32:21.850] 512+0 records in [2025-09-24 03:32:21.850] 512+0 records out [2025-09-24 03:32:21.882] Starting syslogd/klogd: done [2025-09-24 03:32:21.898] DML Start [2025-09-24 03:32:22.057] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:32:22.313] DML res1: 0 [2025-09-24 03:32:22.746] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:32:22.767] Read Success [2025-09-24 03:32:22.767] Verifying certificate... [2025-09-24 03:32:22.990] Verified OK [2025-09-24 03:32:23.006] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:32:24.637] Verified OK [2025-09-24 03:32:24.653] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:32:25.274] Verified OK [2025-09-24 03:32:25.274] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:32:27.801] fs.protected_hardlinks = 1 [2025-09-24 03:32:27.801] fs.protected_symlinks = 1 [2025-09-24 03:32:27.817] kernel.modules_disabled = 1 [2025-09-24 03:32:28.009] [2025-09-24 03:32:28.009] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:32:29.396] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:32:37.181] SBL1:1210.0.1.0 [2025-09-24 03:32:37.229] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:32:38.796] SBL2:1210.0.1.0 [2025-09-24 03:32:38.844] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:32:38.939] j-A [2025-09-24 03:32:46.295] The R5 Autosar Classic is running [2025-09-24 03:32:46.317] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:32:46.317] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:32:46.925] INIT: version 2.96 booting [2025-09-24 03:32:47.037] INIT: Entering runlevel: 5 [2025-09-24 03:32:47.197] mtd32 attached [2025-09-24 03:32:47.197] mtd24 attached [2025-09-24 03:32:47.213] mtd28 attached [2025-09-24 03:32:47.261] RTNETLINK answers: File exists [2025-09-24 03:32:47.261] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:32:47.317] ubi0:dml_code is mounted. [2025-09-24 03:32:47.317] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:32:47.317] ubi1:textures is mounted. [2025-09-24 03:32:47.317] ubi2:animations is mounted. [2025-09-24 03:32:47.317] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:32:47.317] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:32:47.317] data.LB_FadeInType0=100 [2025-09-24 03:32:47.317] data.CHLH_FadeInType0=0 [2025-09-24 03:32:47.317] data.WU_FadeInDelay=0 [2025-09-24 03:32:47.317] max_time_out=0 [2025-09-24 03:32:47.317] No splash screen [2025-09-24 03:32:47.317] stop dss Done [2025-09-24 03:32:47.317] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:32:47.365] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:32:47.397] /dev/mem opened. [2025-09-24 03:32:47.397] Memory mapped at address 0xffffb17ac000. [2025-09-24 03:32:47.397] Read at address 0x00600018 (0xffffb17ac018): 0x00000000 [2025-09-24 03:32:47.397] Write at address 0x00600018 (0xffffb17ac018): 0x00400040, readback 0x00400040 [2025-09-24 03:32:47.397] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:32:47.525] Loaded PowerVR consumer services. [2025-09-24 03:32:47.636] Waiting data available... [2025-09-24 03:32:47.636] 512+0 records in [2025-09-24 03:32:47.652] 512+0 records out [2025-09-24 03:32:47.684] Starting syslogd/klogd: done [2025-09-24 03:32:47.700] DML Start [2025-09-24 03:32:47.893] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:32:48.133] DML res1: 0 [2025-09-24 03:32:48.564] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:32:48.585] Read Success [2025-09-24 03:32:48.585] Verifying certificate... [2025-09-24 03:32:48.856] Verified OK [2025-09-24 03:32:48.873] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:32:50.708] Verified OK [2025-09-24 03:32:50.708] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:32:51.185] Verified OK [2025-09-24 03:32:51.185] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:32:53.583] fs.protected_hardlinks = 1 [2025-09-24 03:32:53.615] fs.protected_symlinks = 1 [2025-09-24 03:32:53.615] kernel.modules_disabled = 1 [2025-09-24 03:32:53.822] [2025-09-24 03:32:53.822] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:32:55.210] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:33:02.975] SBL1:1210.0.1.0 [2025-09-24 03:33:03.023] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:33:04.589] SBL2:1210.0.1.0 [2025-09-24 03:33:04.621] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:33:04.733] j-A [2025-09-24 03:33:12.110] The R5 Autosar Classic is running [2025-09-24 03:33:12.110] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:33:12.110] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:33:12.717] INIT: version 2.96 booting [2025-09-24 03:33:12.829] INIT: Entering runlevel: 5 [2025-09-24 03:33:12.989] mtd32 attached [2025-09-24 03:33:12.989] mtd28 attached [2025-09-24 03:33:13.004] mtd24 attached [2025-09-24 03:33:13.053] RTNETLINK answers: File exists [2025-09-24 03:33:13.094] ubi0:dml_code is mounted. [2025-09-24 03:33:13.094] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:33:13.094] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:33:13.094] ubi1:animations is mounted. [2025-09-24 03:33:13.094] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:33:13.094] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:33:13.094] ubi2:textures is mounted. [2025-09-24 03:33:13.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:33:13.118] data.LB_FadeInType0=100 [2025-09-24 03:33:13.118] data.CHLH_FadeInType0=0 [2025-09-24 03:33:13.118] data.WU_FadeInDelay=0 [2025-09-24 03:33:13.118] max_time_out=0 [2025-09-24 03:33:13.118] No splash screen [2025-09-24 03:33:13.118] stop dss Done [2025-09-24 03:33:13.143] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:33:13.143] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:33:13.207] /dev/mem opened. [2025-09-24 03:33:13.207] Memory mapped at address 0xffff9de6e000. [2025-09-24 03:33:13.207] Read at address 0x00600018 (0xffff9de6e018): 0x00000000 [2025-09-24 03:33:13.207] Write at address 0x00600018 (0xffff9de6e018): 0x00400040, readback 0x00400040 [2025-09-24 03:33:13.383] Loaded PowerVR consumer services. [2025-09-24 03:33:13.415] 512+0 records in [2025-09-24 03:33:13.431] 512+0 records out [2025-09-24 03:33:13.431] Waiting data available... [2025-09-24 03:33:13.447] Starting syslogd/klogd: done [2025-09-24 03:33:13.463] DML Start [2025-09-24 03:33:13.639] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:33:13.895] DML res1: 0 [2025-09-24 03:33:14.303] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:33:14.303] Read Success [2025-09-24 03:33:14.303] Verifying certificate... [2025-09-24 03:33:14.543] Verified OK [2025-09-24 03:33:14.559] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:33:16.190] Verified OK [2025-09-24 03:33:16.211] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:33:16.858] Verified OK [2025-09-24 03:33:16.858] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:33:19.560] fs.protected_hardlinks = 1 [2025-09-24 03:33:19.575] fs.protected_symlinks = 1 [2025-09-24 03:33:19.575] kernel.modules_disabled = 1 [2025-09-24 03:33:19.784] [2025-09-24 03:33:19.784] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:33:20.972] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:33:28.765] SBL1:1210.0.1.0 [2025-09-24 03:33:28.813] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:33:30.380] SBL2:1210.0.1.0 [2025-09-24 03:33:30.412] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:33:30.523] j-A [2025-09-24 03:33:37.899] The R5 Autosar Classic is running [2025-09-24 03:33:37.899] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:33:37.899] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:33:38.507] INIT: version 2.96 booting [2025-09-24 03:33:38.619] INIT: Entering runlevel: 5 [2025-09-24 03:33:38.762] mtd24 attached [2025-09-24 03:33:38.779] mtd28 attached [2025-09-24 03:33:38.795] mtd32 attached [2025-09-24 03:33:38.811] ubi0:textures is mounted. [2025-09-24 03:33:38.843] RTNETLINK answers: File exists [2025-09-24 03:33:38.843] ubi1:animations is mounted. [2025-09-24 03:33:38.884] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:33:38.884] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:33:38.884] ubi2:dml_code is mounted. [2025-09-24 03:33:38.884] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:33:38.884] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:33:38.884] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:33:38.906] data.LB_FadeInType0=100 [2025-09-24 03:33:38.906] data.CHLH_FadeInType0=0 [2025-09-24 03:33:38.906] data.WU_FadeInDelay=0 [2025-09-24 03:33:38.906] max_time_out=0 [2025-09-24 03:33:38.906] No splash screen [2025-09-24 03:33:38.906] stop dss Done [2025-09-24 03:33:38.936] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:33:38.936] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:33:38.936] /dev/mem opened. [2025-09-24 03:33:38.936] Memory mapped at address 0xffffa0f60000. [2025-09-24 03:33:38.961] Read at address 0x00600018 (0xffffa0f60018): 0x00000000 [2025-09-24 03:33:38.961] Write at address 0x00600018 (0xffffa0f60018): 0x00400040, readback 0x00400040 [2025-09-24 03:33:39.058] Loaded PowerVR consumer services. [2025-09-24 03:33:39.201] 512+0 records in [2025-09-24 03:33:39.201] 512+0 records out [2025-09-24 03:33:39.217] Waiting data available... [2025-09-24 03:33:39.249] Starting syslogd/klogd: done [2025-09-24 03:33:39.265] DML Start [2025-09-24 03:33:39.442] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:33:39.681] DML res1: 0 [2025-09-24 03:33:40.065] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:33:40.080] Read Success [2025-09-24 03:33:40.080] Verifying certificate... [2025-09-24 03:33:40.336] Verified OK [2025-09-24 03:33:40.336] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:33:41.952] Verified OK [2025-09-24 03:33:41.952] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:33:42.608] Verified OK [2025-09-24 03:33:42.624] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:33:45.311] fs.protected_hardlinks = 1 [2025-09-24 03:33:45.311] fs.protected_symlinks = 1 [2025-09-24 03:33:45.326] kernel.modules_disabled = 1 [2025-09-24 03:33:45.534] [2025-09-24 03:33:45.534] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:33:46.797] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:33:54.580] SBL1:1210.0.1.0 [2025-09-24 03:33:54.612] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:33:56.196] SBL2:1210.0.1.0 [2025-09-24 03:33:56.228] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:33:56.339] j-A [2025-09-24 03:34:03.676] The R5 Autosar Classic is running [2025-09-24 03:34:03.701] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:34:03.701] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:34:04.310] INIT: version 2.96 booting [2025-09-24 03:34:04.421] INIT: Entering runlevel: 5 [2025-09-24 03:34:04.582] mtd28 attached [2025-09-24 03:34:04.582] mtd24 attached [2025-09-24 03:34:04.598] mtd32 attached [2025-09-24 03:34:04.645] RTNETLINK answers: File exists [2025-09-24 03:34:04.710] ubi0:animations is mounted. [2025-09-24 03:34:04.710] ubi1:textures is mounted. [2025-09-24 03:34:04.710] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:34:04.710] ubi2:dml_code is mounted. [2025-09-24 03:34:04.710] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:34:04.710] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:34:04.710] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:34:04.710] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:34:04.710] data.LB_FadeInType0=100 [2025-09-24 03:34:04.710] data.CHLH_FadeInType0=0 [2025-09-24 03:34:04.710] data.WU_FadeInDelay=0 [2025-09-24 03:34:04.710] max_time_out=0 [2025-09-24 03:34:04.710] No splash screen [2025-09-24 03:34:04.710] stop dss Done [2025-09-24 03:34:04.758] /dev/mem opened. [2025-09-24 03:34:04.758] Memory mapped at address 0xffffa4f6e000. [2025-09-24 03:34:04.790] Read at address 0x00600018 (0xffffa4f6e018): 0x00000000 [2025-09-24 03:34:04.790] Write at address 0x00600018 (0xffffa4f6e018): 0x00400040, readback 0x00400040 [2025-09-24 03:34:04.790] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:34:04.790] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:34:04.918] Loaded PowerVR consumer services. [2025-09-24 03:34:05.038] Waiting data available... [2025-09-24 03:34:05.038] 512+0 records in [2025-09-24 03:34:05.038] 512+0 records out [2025-09-24 03:34:05.070] Starting syslogd/klogd: done [2025-09-24 03:34:05.086] DML Start [2025-09-24 03:34:05.261] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:34:05.501] DML res1: 0 [2025-09-24 03:34:05.917] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:34:05.939] Read Success [2025-09-24 03:34:05.939] Verifying certificate... [2025-09-24 03:34:06.210] Verified OK [2025-09-24 03:34:06.225] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:34:07.865] Verified OK [2025-09-24 03:34:07.865] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:34:08.473] Verified OK [2025-09-24 03:34:08.494] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:34:11.052] fs.protected_hardlinks = 1 [2025-09-24 03:34:11.068] fs.protected_symlinks = 1 [2025-09-24 03:34:11.068] kernel.modules_disabled = 1 [2025-09-24 03:34:11.260] [2025-09-24 03:34:11.260] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:34:12.648] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:34:20.372] SBL1:1210.0.1.0 [2025-09-24 03:34:20.404] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:34:21.988] SBL2:1210.0.1.0 [2025-09-24 03:34:22.020] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:34:22.131] j-A [2025-09-24 03:34:29.504] The R5 Autosar Classic is running [2025-09-24 03:34:29.504] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:34:29.504] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:34:30.111] INIT: version 2.96 booting [2025-09-24 03:34:30.223] INIT: Entering runlevel: 5 [2025-09-24 03:34:30.383] mtd24 attached [2025-09-24 03:34:30.383] mtd28 attached [2025-09-24 03:34:30.415] mtd32 attached [2025-09-24 03:34:30.447] ubi0:textures is mounted. [2025-09-24 03:34:30.515] ubi1:animations is mounted. [2025-09-24 03:34:30.515] RTNETLINK answers: File exists [2025-09-24 03:34:30.515] ubi2:dml_code is mounted. [2025-09-24 03:34:30.515] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:34:30.515] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:34:30.515] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:34:30.515] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:34:30.515] data.LB_FadeInType0=100 [2025-09-24 03:34:30.515] data.CHLH_FadeInType0=0 [2025-09-24 03:34:30.515] data.WU_FadeInDelay=0 [2025-09-24 03:34:30.515] max_time_out=0 [2025-09-24 03:34:30.515] No splash screen [2025-09-24 03:34:30.515] stop dss Done [2025-09-24 03:34:30.515] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:34:30.599] /dev/mem opened. [2025-09-24 03:34:30.599] Memory mapped at address 0xffffb56e0000. [2025-09-24 03:34:30.599] Read at address 0x00600018 (0xffffb56e0018): 0x00000000 [2025-09-24 03:34:30.599] Write at address 0x00600018 (0xffffb56e0018): 0x00400040, readback 0x00400040 [2025-09-24 03:34:30.599] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:34:30.599] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:34:30.662] Loaded PowerVR consumer services. [2025-09-24 03:34:30.829] 512+0 records in [2025-09-24 03:34:30.829] 512+0 records out [2025-09-24 03:34:30.829] Waiting data available... [2025-09-24 03:34:30.845] Starting syslogd/klogd: done [2025-09-24 03:34:30.861] DML Start [2025-09-24 03:34:30.989] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:34:31.229] DML res1: 0 [2025-09-24 03:34:31.706] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:34:31.706] Read Success [2025-09-24 03:34:31.706] Verifying certificate... [2025-09-24 03:34:31.978] Verified OK [2025-09-24 03:34:31.994] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:34:33.656] Verified OK [2025-09-24 03:34:33.656] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:34:34.222] Verified OK [2025-09-24 03:34:34.222] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:34:36.813] fs.protected_hardlinks = 1 [2025-09-24 03:34:36.828] fs.protected_symlinks = 1 [2025-09-24 03:34:36.828] kernel.modules_disabled = 1 [2025-09-24 03:34:37.037] [2025-09-24 03:34:37.037] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:34:38.358] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:34:46.186] SBL1:1210.0.1.0 [2025-09-24 03:34:46.218] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:34:47.802] SBL2:1210.0.1.0 [2025-09-24 03:34:47.834] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:34:47.929] j-A [2025-09-24 03:34:55.283] The R5 Autosar Classic is running [2025-09-24 03:34:55.308] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:34:55.308] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:34:55.915] INIT: version 2.96 booting [2025-09-24 03:34:56.027] INIT: Entering runlevel: 5 [2025-09-24 03:34:56.171] mtd24 attached [2025-09-24 03:34:56.187] mtd28 attached [2025-09-24 03:34:56.203] mtd32 attached [2025-09-24 03:34:56.235] ubi0:textures is mounted. [2025-09-24 03:34:56.251] ubi1:animations is mounted. [2025-09-24 03:34:56.251] RTNETLINK answers: File exists [2025-09-24 03:34:56.308] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:34:56.308] ubi2:dml_code is mounted. [2025-09-24 03:34:56.308] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:34:56.308] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:34:56.308] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:34:56.308] data.LB_FadeInType0=100 [2025-09-24 03:34:56.308] data.CHLH_FadeInType0=0 [2025-09-24 03:34:56.308] data.WU_FadeInDelay=0 [2025-09-24 03:34:56.308] max_time_out=0 [2025-09-24 03:34:56.308] No splash screen [2025-09-24 03:34:56.308] stop dss Done [2025-09-24 03:34:56.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:34:56.356] /dev/mem opened. [2025-09-24 03:34:56.356] Memory mapped at address 0xffffbf16d000. [2025-09-24 03:34:56.382] Read at address 0x00600018 (0xffffbf16d018): 0x00000000 [2025-09-24 03:34:56.382] Write at address 0x00600018 (0xffffbf16d018): 0x00400040, readback 0x00400040 [2025-09-24 03:34:56.398] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:34:56.414] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:34:56.509] Loaded PowerVR consumer services. [2025-09-24 03:34:56.622] Waiting data available... [2025-09-24 03:34:56.638] 512+0 records in [2025-09-24 03:34:56.638] 512+0 records out [2025-09-24 03:34:56.685] Starting syslogd/klogd: done [2025-09-24 03:34:56.701] DML Start [2025-09-24 03:34:56.894] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:34:57.117] DML res1: 0 [2025-09-24 03:34:57.560] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:34:57.560] Read Success [2025-09-24 03:34:57.560] Verifying certificate... [2025-09-24 03:34:57.800] Verified OK [2025-09-24 03:34:57.816] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:34:59.539] Verified OK [2025-09-24 03:34:59.539] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:35:00.172] Verified OK [2025-09-24 03:35:00.172] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:35:02.858] fs.protected_hardlinks = 1 [2025-09-24 03:35:02.858] fs.protected_symlinks = 1 [2025-09-24 03:35:02.873] kernel.modules_disabled = 1 [2025-09-24 03:35:03.066] [2025-09-24 03:35:03.066] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:35:04.204] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:35:11.977] SBL1:1210.0.1.0 [2025-09-24 03:35:12.009] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:35:13.591] SBL2:1210.0.1.0 [2025-09-24 03:35:13.623] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 03:35:13.735] j-A [2025-09-24 03:35:21.074] The R5 Autosar Classic is running [2025-09-24 03:35:21.105] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:35:21.105] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:35:21.712] INIT: version 2.96 booting [2025-09-24 03:35:21.824] INIT: Entering runlevel: 5 [2025-09-24 03:35:21.983] mtd24 attached [2025-09-24 03:35:22.000] mtd32 attached [2025-09-24 03:35:22.000] mtd28 attached [2025-09-24 03:35:22.047] RTNETLINK answers: File exists [2025-09-24 03:35:22.114] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:35:22.114] ubi0:textures is mounted. [2025-09-24 03:35:22.114] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:35:22.114] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:35:22.114] ubi1:dml_code is mounted. [2025-09-24 03:35:22.114] ubi2:animations is mounted. [2025-09-24 03:35:22.114] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:35:22.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:35:22.114] data.LB_FadeInType0=100 [2025-09-24 03:35:22.114] data.CHLH_FadeInType0=0 [2025-09-24 03:35:22.114] data.WU_FadeInDelay=0 [2025-09-24 03:35:22.114] max_time_out=0 [2025-09-24 03:35:22.114] No splash screen [2025-09-24 03:35:22.114] stop dss Done [2025-09-24 03:35:22.146] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:35:22.178] /dev/mem opened. [2025-09-24 03:35:22.178] Memory mapped at address 0xffff93500000. [2025-09-24 03:35:22.178] Read at address 0x00600018 (0xffff93500018): 0x00000000 [2025-09-24 03:35:22.178] Write at address 0x00600018 (0xffff93500018): 0x00400040, readback 0x00400040 [2025-09-24 03:35:22.178] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:35:22.386] Loaded PowerVR consumer services. [2025-09-24 03:35:22.418] 512+0 records in [2025-09-24 03:35:22.418] 512+0 records out [2025-09-24 03:35:22.434] Waiting data available... [2025-09-24 03:35:22.466] Starting syslogd/klogd: done [2025-09-24 03:35:22.482] DML Start [2025-09-24 03:35:22.641] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:35:22.849] DML res1: 0 [2025-09-24 03:35:23.359] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:35:23.359] Read Success [2025-09-24 03:35:23.359] Verifying certificate... [2025-09-24 03:35:23.583] Verified OK [2025-09-24 03:35:23.598] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:35:25.253] Verified OK [2025-09-24 03:35:25.253] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:35:25.855] Verified OK [2025-09-24 03:35:25.855] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:35:28.541] fs.protected_hardlinks = 1 [2025-09-24 03:35:28.557] fs.protected_symlinks = 1 [2025-09-24 03:35:28.557] kernel.modules_disabled = 1 [2025-09-24 03:35:28.765] [2025-09-24 03:35:28.765] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:35:29.961] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:35:37.778] SBL1:1210.0.1.0 [2025-09-24 03:35:37.810] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:35:39.392] SBL2:1210.0.1.0 [2025-09-24 03:35:39.424] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:35:39.537] j-A [2025-09-24 03:35:46.875] The R5 Autosar Classic is running [2025-09-24 03:35:46.900] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:35:46.900] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:35:47.508] INIT: version 2.96 booting [2025-09-24 03:35:47.620] INIT: Entering runlevel: 5 [2025-09-24 03:35:47.763] mtd24 attached [2025-09-24 03:35:47.779] mtd28 attached [2025-09-24 03:35:47.795] mtd32 attached [2025-09-24 03:35:47.811] ubi0:textures is mounted. [2025-09-24 03:35:47.843] RTNETLINK answers: File exists [2025-09-24 03:35:47.895] ubi2:dml_code is mounted. [2025-09-24 03:35:47.895] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:35:47.895] ubi1:animations is mounted. [2025-09-24 03:35:47.895] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:35:47.895] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:35:47.895] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:35:47.895] data.LB_FadeInType0=100 [2025-09-24 03:35:47.895] data.CHLH_FadeInType0=0 [2025-09-24 03:35:47.895] data.WU_FadeInDelay=0 [2025-09-24 03:35:47.895] max_time_out=0 [2025-09-24 03:35:47.895] No splash screen [2025-09-24 03:35:47.895] stop dss Done [2025-09-24 03:35:47.895] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:35:47.965] /dev/mem opened. [2025-09-24 03:35:47.965] Memory mapped at address 0xffffa5193000. [2025-09-24 03:35:47.965] Read at address 0x00600018 (0xffffa5193018): 0x00000000 [2025-09-24 03:35:47.965] Write at address 0x00600018 (0xffffa5193018): 0x00400040, readback 0x00400040 [2025-09-24 03:35:47.965] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:35:47.981] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:35:48.077] Loaded PowerVR consumer services. [2025-09-24 03:35:48.205] Waiting data available... [2025-09-24 03:35:48.221] 512+0 records in [2025-09-24 03:35:48.221] 512+0 records out [2025-09-24 03:35:48.236] Starting syslogd/klogd: done [2025-09-24 03:35:48.253] DML Start [2025-09-24 03:35:48.429] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:35:48.685] DML res1: 0 [2025-09-24 03:35:49.085] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:35:49.085] Read Success [2025-09-24 03:35:49.101] Verifying certificate... [2025-09-24 03:35:49.372] Verified OK [2025-09-24 03:35:49.404] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:35:50.998] Verified OK [2025-09-24 03:35:50.998] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:35:51.579] Verified OK [2025-09-24 03:35:51.579] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:35:54.344] fs.protected_hardlinks = 1 [2025-09-24 03:35:54.373] fs.protected_symlinks = 1 [2025-09-24 03:35:54.373] kernel.modules_disabled = 1 [2025-09-24 03:35:54.565] [2025-09-24 03:35:54.565] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:35:55.764] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:36:03.577] SBL1:1210.0.1.0 [2025-09-24 03:36:03.625] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:36:05.192] SBL2:1210.0.1.0 [2025-09-24 03:36:05.224] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:36:05.335] j-A [2025-09-24 03:36:12.710] The R5 Autosar Classic is running [2025-09-24 03:36:12.710] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:36:12.710] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:36:13.317] INIT: version 2.96 booting [2025-09-24 03:36:13.429] INIT: Entering runlevel: 5 [2025-09-24 03:36:13.589] mtd32 attached [2025-09-24 03:36:13.589] mtd24 attached [2025-09-24 03:36:13.605] mtd28 attached [2025-09-24 03:36:13.653] RTNETLINK answers: File exists [2025-09-24 03:36:13.716] ubi1:textures is mounted. [2025-09-24 03:36:13.716] ubi0:dml_code is mounted. [2025-09-24 03:36:13.716] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:36:13.716] ubi2:animations is mounted. [2025-09-24 03:36:13.716] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:36:13.716] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:36:13.716] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:36:13.716] data.LB_FadeInType0=100 [2025-09-24 03:36:13.716] data.CHLH_FadeInType0=0 [2025-09-24 03:36:13.716] data.WU_FadeInDelay=0 [2025-09-24 03:36:13.716] max_time_out=0 [2025-09-24 03:36:13.716] No splash screen [2025-09-24 03:36:13.716] stop dss Done [2025-09-24 03:36:13.716] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:36:13.747] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:36:13.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:36:13.780] /dev/mem opened. [2025-09-24 03:36:13.780] Memory mapped at address 0xffffb0fd8000. [2025-09-24 03:36:13.780] Read at address 0x00600018 (0xffffb0fd8018): 0x00000000 [2025-09-24 03:36:13.780] Write at address 0x00600018 (0xffffb0fd8018): 0x00400040, readback 0x00400040 [2025-09-24 03:36:13.892] Loaded PowerVR consumer services. [2025-09-24 03:36:14.042] Waiting data available... [2025-09-24 03:36:14.042] 512+0 records in [2025-09-24 03:36:14.042] 512+0 records out [2025-09-24 03:36:14.074] Starting syslogd/klogd: done [2025-09-24 03:36:14.090] DML Start [2025-09-24 03:36:14.282] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:36:14.506] DML res1: 0 [2025-09-24 03:36:14.950] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:36:14.950] Read Success [2025-09-24 03:36:14.950] Verifying certificate... [2025-09-24 03:36:15.190] Verified OK [2025-09-24 03:36:15.206] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:36:16.996] Verified OK [2025-09-24 03:36:17.017] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:36:17.600] Verified OK [2025-09-24 03:36:17.600] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:36:20.109] fs.protected_hardlinks = 1 [2025-09-24 03:36:20.109] fs.protected_symlinks = 1 [2025-09-24 03:36:20.109] kernel.modules_disabled = 1 [2025-09-24 03:36:20.317] [2025-09-24 03:36:20.317] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:36:21.577] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:36:29.371] SBL1:1210.0.1.0 [2025-09-24 03:36:29.419] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:36:30.987] SBL2:1210.0.1.0 [2025-09-24 03:36:31.035] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:36:31.131] j-A [2025-09-24 03:36:38.486] The R5 Autosar Classic is running [2025-09-24 03:36:38.486] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:36:38.507] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:36:39.114] INIT: version 2.96 booting [2025-09-24 03:36:39.227] INIT: Entering runlevel: 5 [2025-09-24 03:36:39.386] mtd28 attached [2025-09-24 03:36:39.402] mtd32 attached [2025-09-24 03:36:39.402] mtd24 attached [2025-09-24 03:36:39.418] ubi0:animations is mounted. [2025-09-24 03:36:39.450] RTNETLINK answers: File exists [2025-09-24 03:36:39.515] ubi2:textures is mounted. [2025-09-24 03:36:39.515] ubi1:dml_code is mounted. [2025-09-24 03:36:39.515] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:36:39.515] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:36:39.515] data.LB_FadeInType0=100 [2025-09-24 03:36:39.515] data.CHLH_FadeInType0=0 [2025-09-24 03:36:39.515] data.WU_FadeInDelay=0 [2025-09-24 03:36:39.515] max_time_out=0 [2025-09-24 03:36:39.515] No splash screen [2025-09-24 03:36:39.515] stop dss Done [2025-09-24 03:36:39.515] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:36:39.515] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:36:39.515] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:36:39.563] /dev/mem opened. [2025-09-24 03:36:39.563] Memory mapped at address 0xffff950fd000. [2025-09-24 03:36:39.590] Read at address 0x00600018 (0xffff950fd018): 0x00000000 [2025-09-24 03:36:39.590] Write at address 0x00600018 (0xffff950fd018): 0x00400040, readback 0x00400040 [2025-09-24 03:36:39.590] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:36:39.605] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:36:39.749] Loaded PowerVR consumer services. [2025-09-24 03:36:39.837] 512+0 records in [2025-09-24 03:36:39.837] 512+0 records out [2025-09-24 03:36:39.837] Waiting data available... [2025-09-24 03:36:39.869] Starting syslogd/klogd: done [2025-09-24 03:36:39.885] DML Start [2025-09-24 03:36:40.061] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:36:40.269] DML res1: 0 [2025-09-24 03:36:40.796] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:36:40.796] Read Success [2025-09-24 03:36:40.796] Verifying certificate... [2025-09-24 03:36:41.083] Verified OK [2025-09-24 03:36:41.115] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:36:42.824] Verified OK [2025-09-24 03:36:42.824] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:36:43.377] Verified OK [2025-09-24 03:36:43.377] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:36:45.951] fs.protected_hardlinks = 1 [2025-09-24 03:36:45.967] fs.protected_symlinks = 1 [2025-09-24 03:36:45.967] kernel.modules_disabled = 1 [2025-09-24 03:36:46.159] [2025-09-24 03:36:46.159] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:36:47.373] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:36:55.171] SBL1:1210.0.1.0 [2025-09-24 03:36:55.219] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:36:56.785] SBL2:1210.0.1.0 [2025-09-24 03:36:56.833] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:36:56.930] j-A [2025-09-24 03:37:04.285] The R5 Autosar Classic is running [2025-09-24 03:37:04.308] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:37:04.308] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:37:04.916] INIT: version 2.96 booting [2025-09-24 03:37:05.027] INIT: Entering runlevel: 5 [2025-09-24 03:37:05.171] mtd24 attached [2025-09-24 03:37:05.187] mtd32 attached [2025-09-24 03:37:05.203] mtd28 attached [2025-09-24 03:37:05.235] ubi0:textures is mounted. [2025-09-24 03:37:05.285] RTNETLINK answers: File exists [2025-09-24 03:37:05.285] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:37:05.285] ubi1:dml_code is mounted. [2025-09-24 03:37:05.285] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:37:05.285] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:37:05.285] ubi2:animations is mounted. [2025-09-24 03:37:05.285] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:37:05.285] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:37:05.285] data.LB_FadeInType0=100 [2025-09-24 03:37:05.285] data.CHLH_FadeInType0=0 [2025-09-24 03:37:05.306] data.WU_FadeInDelay=0 [2025-09-24 03:37:05.306] max_time_out=0 [2025-09-24 03:37:05.306] No splash screen [2025-09-24 03:37:05.306] stop dss Done [2025-09-24 03:37:05.322] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:37:05.337] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:37:05.394] /dev/mem opened. [2025-09-24 03:37:05.394] Memory mapped at address 0xffff82089000. [2025-09-24 03:37:05.394] Read at address 0x00600018 (0xffff82089018): 0x00000000 [2025-09-24 03:37:05.394] Write at address 0x00600018 (0xffff82089018): 0x00400040, readback 0x00400040 [2025-09-24 03:37:05.475] Loaded PowerVR consumer services. [2025-09-24 03:37:05.639] 512+0 records in [2025-09-24 03:37:05.639] 512+0 records out [2025-09-24 03:37:05.639] Waiting data available... [2025-09-24 03:37:05.672] Starting syslogd/klogd: done [2025-09-24 03:37:05.704] DML Start [2025-09-24 03:37:05.896] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:37:06.136] DML res1: 0 [2025-09-24 03:37:06.423] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:37:06.451] Read Success [2025-09-24 03:37:06.451] Verifying certificate... [2025-09-24 03:37:06.675] Verified OK [2025-09-24 03:37:06.691] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:37:08.188] Verified OK [2025-09-24 03:37:08.188] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:37:08.860] Verified OK [2025-09-24 03:37:08.860] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:37:11.641] fs.protected_hardlinks = 1 [2025-09-24 03:37:11.657] fs.protected_symlinks = 1 [2025-09-24 03:37:11.657] kernel.modules_disabled = 1 [2025-09-24 03:37:11.849] [2025-09-24 03:37:11.849] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:37:13.192] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:37:20.980] SBL1:1210.0.1.0 [2025-09-24 03:37:21.012] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:37:22.595] SBL2:1210.0.1.0 [2025-09-24 03:37:22.628] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:37:22.739] j-A [2025-09-24 03:37:30.078] The R5 Autosar Classic is running [2025-09-24 03:37:30.103] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:37:30.103] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:37:30.711] INIT: version 2.96 booting [2025-09-24 03:37:30.839] INIT: Entering runlevel: 5 [2025-09-24 03:37:30.983] mtd32 attached [2025-09-24 03:37:30.998] mtd24 attached [2025-09-24 03:37:31.015] mtd28 attached [2025-09-24 03:37:31.046] RTNETLINK answers: File exists [2025-09-24 03:37:31.094] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:37:31.094] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:37:31.094] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:37:31.094] ubi0:dml_code is mounted. [2025-09-24 03:37:31.094] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:37:31.094] ubi1:textures is mounted. [2025-09-24 03:37:31.094] ubi2:animations is mounted. [2025-09-24 03:37:31.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:37:31.122] data.LB_FadeInType0=100 [2025-09-24 03:37:31.122] data.CHLH_FadeInType0=0 [2025-09-24 03:37:31.122] data.WU_FadeInDelay=0 [2025-09-24 03:37:31.122] max_time_out=0 [2025-09-24 03:37:31.122] No splash screen [2025-09-24 03:37:31.122] stop dss Done [2025-09-24 03:37:31.165] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:37:31.165] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:37:31.203] /dev/mem opened. [2025-09-24 03:37:31.203] Memory mapped at address 0xffffb215c000. [2025-09-24 03:37:31.203] Read at address 0x00600018 (0xffffb215c018): 0x00000000 [2025-09-24 03:37:31.203] Write at address 0x00600018 (0xffffb215c018): 0x00400040, readback 0x00400040 [2025-09-24 03:37:31.314] Loaded PowerVR consumer services. [2025-09-24 03:37:31.426] 512+0 records in [2025-09-24 03:37:31.426] 512+0 records out [2025-09-24 03:37:31.458] Starting syslogd/klogd: Waiting data available... [2025-09-24 03:37:31.458] done [2025-09-24 03:37:31.474] DML Start [2025-09-24 03:37:31.651] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:37:31.874] DML res1: 0 [2025-09-24 03:37:32.383] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:37:32.383] Read Success [2025-09-24 03:37:32.383] Verifying certificate... [2025-09-24 03:37:32.591] Verified OK [2025-09-24 03:37:32.607] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:37:34.299] Verified OK [2025-09-24 03:37:34.299] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:37:34.976] Verified OK [2025-09-24 03:37:34.976] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:37:37.662] fs.protected_hardlinks = 1 [2025-09-24 03:37:37.662] fs.protected_symlinks = 1 [2025-09-24 03:37:37.678] kernel.modules_disabled = 1 [2025-09-24 03:37:37.870] [2025-09-24 03:37:37.870] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:37:38.949] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:37:46.767] SBL1:1210.0.1.0 [2025-09-24 03:37:46.798] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:37:48.381] SBL2:1210.0.1.0 [2025-09-24 03:37:48.412] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:37:48.524] j-A [2025-09-24 03:37:55.863] The R5 Autosar Classic is running [2025-09-24 03:37:55.894] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:37:55.894] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:37:56.502] INIT: version 2.96 booting [2025-09-24 03:37:56.614] INIT: Entering runlevel: 5 [2025-09-24 03:37:56.758] mtd28 attached [2025-09-24 03:37:56.774] mtd32 attached [2025-09-24 03:37:56.790] mtd24 attached [2025-09-24 03:37:56.822] ubi0:animations is mounted. [2025-09-24 03:37:56.838] RTNETLINK answers: File exists [2025-09-24 03:37:56.838] ubi1:dml_code is mounted. [2025-09-24 03:37:56.897] ubi2:textures is mounted. [2025-09-24 03:37:56.897] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:37:56.897] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:37:56.897] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:37:56.897] data.LB_FadeInType0=100 [2025-09-24 03:37:56.897] data.CHLH_FadeInType0=0 [2025-09-24 03:37:56.897] data.WU_FadeInDelay=0 [2025-09-24 03:37:56.897] max_time_out=0 [2025-09-24 03:37:56.897] No splash screen [2025-09-24 03:37:56.897] stop dss Done [2025-09-24 03:37:56.897] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:37:56.897] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:37:56.952] /dev/mem opened. [2025-09-24 03:37:56.952] Memory mapped at address 0xffff8697f000. [2025-09-24 03:37:56.952] Read at address 0x00600018 (0xffff8697f018): 0x00000000 [2025-09-24 03:37:56.952] Write at address 0x00600018 (0xffff8697f018): 0x00400040, readback 0x00400040 [2025-09-24 03:37:56.968] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:37:56.968] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:37:57.048] Loaded PowerVR consumer services. [2025-09-24 03:37:57.219] Waiting data available... [2025-09-24 03:37:57.219] 512+0 records in [2025-09-24 03:37:57.219] 512+0 records out [2025-09-24 03:37:57.251] Starting syslogd/klogd: done [2025-09-24 03:37:57.267] DML Start [2025-09-24 03:37:57.442] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:37:57.634] DML res1: 0 [2025-09-24 03:37:58.127] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:37:58.127] Read Success [2025-09-24 03:37:58.127] Verifying certificate... [2025-09-24 03:37:58.367] Verified OK [2025-09-24 03:37:58.399] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:38:00.061] Verified OK [2025-09-24 03:38:00.061] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:38:00.718] Verified OK [2025-09-24 03:38:00.740] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:38:03.362] fs.protected_hardlinks = 1 [2025-09-24 03:38:03.378] fs.protected_symlinks = 1 [2025-09-24 03:38:03.378] kernel.modules_disabled = 1 [2025-09-24 03:38:03.570] [2025-09-24 03:38:03.570] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:38:04.731] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:38:12.574] SBL1:1210.0.1.0 [2025-09-24 03:38:12.622] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:38:14.188] SBL2:1210.0.1.0 [2025-09-24 03:38:14.220] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:38:14.332] j-A [2025-09-24 03:38:21.707] The R5 Autosar Classic is running [2025-09-24 03:38:21.707] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:38:21.707] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:38:22.314] INIT: version 2.96 booting [2025-09-24 03:38:22.425] INIT: Entering runlevel: 5 [2025-09-24 03:38:22.586] mtd24 attached [2025-09-24 03:38:22.602] mtd32 attached [2025-09-24 03:38:22.602] mtd28 attached [2025-09-24 03:38:22.649] RTNETLINK answers: File exists [2025-09-24 03:38:22.714] ubi0:textures is mounted. [2025-09-24 03:38:22.714] ubi1:dml_code is mounted. [2025-09-24 03:38:22.714] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:38:22.714] ubi2:animations is mounted. [2025-09-24 03:38:22.714] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:38:22.714] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:38:22.714] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:38:22.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:38:22.714] data.LB_FadeInType0=100 [2025-09-24 03:38:22.714] data.CHLH_FadeInType0=0 [2025-09-24 03:38:22.714] data.WU_FadeInDelay=0 [2025-09-24 03:38:22.714] max_time_out=0 [2025-09-24 03:38:22.714] No splash screen [2025-09-24 03:38:22.714] stop dss Done [2025-09-24 03:38:22.755] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:38:22.755] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:38:22.771] /dev/mem opened. [2025-09-24 03:38:22.803] Memory mapped at address 0xffffaed35000. [2025-09-24 03:38:22.803] Read at address 0x00600018 (0xffffaed35018): 0x00000000 [2025-09-24 03:38:22.803] Write at address 0x00600018 (0xffffaed35018): 0x00400040, readback 0x00400040 [2025-09-24 03:38:22.899] Loaded PowerVR consumer services. [2025-09-24 03:38:23.036] Waiting data available... [2025-09-24 03:38:23.036] 512+0 records in [2025-09-24 03:38:23.036] 512+0 records out [2025-09-24 03:38:23.068] Starting syslogd/klogd: done [2025-09-24 03:38:23.084] DML Start [2025-09-24 03:38:23.276] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:38:23.484] DML res1: 0 [2025-09-24 03:38:23.947] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:38:23.968] Read Success [2025-09-24 03:38:23.968] Verifying certificate... [2025-09-24 03:38:24.225] Verified OK [2025-09-24 03:38:24.241] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:38:25.904] Verified OK [2025-09-24 03:38:25.904] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:38:26.589] Verified OK [2025-09-24 03:38:26.589] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:38:29.275] fs.protected_hardlinks = 1 [2025-09-24 03:38:29.275] fs.protected_symlinks = 1 [2025-09-24 03:38:29.290] kernel.modules_disabled = 1 [2025-09-24 03:38:29.499] [2025-09-24 03:38:29.499] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:38:30.614] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:38:38.374] SBL1:1210.0.1.0 [2025-09-24 03:38:38.422] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:38:39.988] SBL2:1210.0.1.0 [2025-09-24 03:38:40.037] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:38:40.132] j-A [2025-09-24 03:38:47.486] The R5 Autosar Classic is running [2025-09-24 03:38:47.511] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:38:47.511] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:38:48.118] INIT: version 2.96 booting [2025-09-24 03:38:48.231] INIT: Entering runlevel: 5 [2025-09-24 03:38:48.375] mtd24 attached [2025-09-24 03:38:48.391] mtd28 attached [2025-09-24 03:38:48.454] ubi1:animations is mounted. [2025-09-24 03:38:48.454] ubi0:textures is mounted. [2025-09-24 03:38:48.454] mtd32 attached [2025-09-24 03:38:48.454] RTNETLINK answers: File exists [2025-09-24 03:38:48.495] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:38:48.495] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:38:48.495] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:38:48.495] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:38:48.495] ubi2:dml_code is mounted. [2025-09-24 03:38:48.495] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:38:48.519] data.LB_FadeInType0=100 [2025-09-24 03:38:48.519] data.CHLH_FadeInType0=0 [2025-09-24 03:38:48.519] data.WU_FadeInDelay=0 [2025-09-24 03:38:48.519] max_time_out=0 [2025-09-24 03:38:48.519] No splash screen [2025-09-24 03:38:48.519] stop dss Done [2025-09-24 03:38:48.565] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:38:48.565] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:38:48.603] /dev/mem opened. [2025-09-24 03:38:48.603] Memory mapped at address 0xffff927ff000. [2025-09-24 03:38:48.603] Read at address 0x00600018 (0xffff927ff018): 0x00000000 [2025-09-24 03:38:48.603] Write at address 0x00600018 (0xffff927ff018): 0x00400040, readback 0x00400040 [2025-09-24 03:38:48.699] Loaded PowerVR consumer services. [2025-09-24 03:38:48.827] 512+0 records in [2025-09-24 03:38:48.827] 512+0 records out [2025-09-24 03:38:48.843] Waiting data available... [2025-09-24 03:38:48.875] Starting syslogd/klogd: done [2025-09-24 03:38:48.891] DML Start [2025-09-24 03:38:49.051] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:38:49.291] DML res1: 0 [2025-09-24 03:38:49.738] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:38:49.754] Read Success [2025-09-24 03:38:49.754] Verifying certificate... [2025-09-24 03:38:50.042] Verified OK [2025-09-24 03:38:50.058] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:38:51.688] Verified OK [2025-09-24 03:38:51.688] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:38:52.279] Verified OK [2025-09-24 03:38:52.279] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:38:54.917] fs.protected_hardlinks = 1 [2025-09-24 03:38:54.917] fs.protected_symlinks = 1 [2025-09-24 03:38:54.917] kernel.modules_disabled = 1 [2025-09-24 03:38:55.092] [2025-09-24 03:38:55.092] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:38:56.361] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:39:04.166] SBL1:1210.0.1.0 [2025-09-24 03:39:04.214] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:39:05.797] SBL2:1210.0.1.0 [2025-09-24 03:39:05.829] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:39:05.925] j-A [2025-09-24 03:39:13.278] The R5 Autosar Classic is running [2025-09-24 03:39:13.303] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:39:13.303] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:39:13.926] INIT: version 2.96 booting [2025-09-24 03:39:14.038] INIT: Entering runlevel: 5 [2025-09-24 03:39:14.198] mtd24 attached [2025-09-24 03:39:14.214] mtd28 attached [2025-09-24 03:39:14.230] mtd32 attached [2025-09-24 03:39:14.247] ubi0:textures is mounted. [2025-09-24 03:39:14.263] RTNETLINK answers: File exists [2025-09-24 03:39:14.312] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:39:14.312] ubi1:animations is mounted. [2025-09-24 03:39:14.312] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:39:14.312] ubi2:dml_code is mounted. [2025-09-24 03:39:14.312] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:39:14.312] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:39:14.312] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:39:14.312] data.LB_FadeInType0=100 [2025-09-24 03:39:14.333] data.CHLH_FadeInType0=0 [2025-09-24 03:39:14.333] data.WU_FadeInDelay=0 [2025-09-24 03:39:14.333] max_time_out=0 [2025-09-24 03:39:14.333] No splash screen [2025-09-24 03:39:14.333] stop dss Done [2025-09-24 03:39:14.373] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:39:14.373] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:39:14.410] /dev/mem opened. [2025-09-24 03:39:14.410] Memory mapped at address 0xffff95f66000. [2025-09-24 03:39:14.410] Read at address 0x00600018 (0xffff95f66018): 0x00000000 [2025-09-24 03:39:14.410] Write at address 0x00600018 (0xffff95f66018): 0x00400040, readback 0x00400040 [2025-09-24 03:39:14.522] Loaded PowerVR consumer services. [2025-09-24 03:39:14.648] Waiting data available... [2025-09-24 03:39:14.648] 512+0 records in [2025-09-24 03:39:14.648] 512+0 records out [2025-09-24 03:39:14.664] Starting syslogd/klogd: done [2025-09-24 03:39:14.680] DML Start [2025-09-24 03:39:14.872] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:39:15.080] DML res1: 0 [2025-09-24 03:39:15.511] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:39:15.527] Read Success [2025-09-24 03:39:15.527] Verifying certificate... [2025-09-24 03:39:15.767] Verified OK [2025-09-24 03:39:15.783] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:39:17.571] Verified OK [2025-09-24 03:39:17.571] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:39:18.114] Verified OK [2025-09-24 03:39:18.136] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:39:20.677] fs.protected_hardlinks = 1 [2025-09-24 03:39:20.693] fs.protected_symlinks = 1 [2025-09-24 03:39:20.693] kernel.modules_disabled = 1 [2025-09-24 03:39:20.885] [2025-09-24 03:39:20.885] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:39:22.165] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:39:29.964] SBL1:1210.0.1.0 [2025-09-24 03:39:30.012] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:39:31.578] SBL2:1210.0.1.0 [2025-09-24 03:39:31.610] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:39:31.723] j-A [2025-09-24 03:39:39.076] The R5 Autosar Classic is running [2025-09-24 03:39:39.076] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:39:39.097] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:39:39.705] INIT: version 2.96 booting [2025-09-24 03:39:39.816] INIT: Entering runlevel: 5 [2025-09-24 03:39:39.976] mtd28 attached [2025-09-24 03:39:39.976] mtd24 attached [2025-09-24 03:39:39.993] mtd32 attached [2025-09-24 03:39:40.041] ubi0:animations is mounted. [2025-09-24 03:39:40.065] RTNETLINK answers: File exists [2025-09-24 03:39:40.065] ubi1:textures is mounted. [2025-09-24 03:39:40.065] ubi2:dml_code is mounted. [2025-09-24 03:39:40.065] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:39:40.111] data.LB_FadeInType0=100 [2025-09-24 03:39:40.111] data.CHLH_FadeInType0=0 [2025-09-24 03:39:40.111] data.WU_FadeInDelay=0 [2025-09-24 03:39:40.111] max_time_out=0 [2025-09-24 03:39:40.111] No splash screen [2025-09-24 03:39:40.111] stop dss Done [2025-09-24 03:39:40.111] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:39:40.111] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:39:40.111] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:39:40.111] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:39:40.143] /dev/mem opened. [2025-09-24 03:39:40.143] Memory mapped at address 0xffffa529b000. [2025-09-24 03:39:40.169] Read at address 0x00600018 (0xffffa529b018): 0x00000000 [2025-09-24 03:39:40.169] Write at address 0x00600018 (0xffffa529b018): 0x00400040, readback 0x00400040 [2025-09-24 03:39:40.200] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:39:40.216] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:39:40.296] Loaded PowerVR consumer services. [2025-09-24 03:39:40.439] 512+0 records in [2025-09-24 03:39:40.439] 512+0 records out [2025-09-24 03:39:40.439] Waiting data available... [2025-09-24 03:39:40.455] Starting syslogd/klogd: done [2025-09-24 03:39:40.471] DML Start [2025-09-24 03:39:40.663] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:39:40.870] DML res1: 0 [2025-09-24 03:39:41.378] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:39:41.378] Read Success [2025-09-24 03:39:41.378] Verifying certificate... [2025-09-24 03:39:41.618] Verified OK [2025-09-24 03:39:41.634] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:39:43.249] Verified OK [2025-09-24 03:39:43.249] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:39:43.872] Verified OK [2025-09-24 03:39:43.888] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:39:46.478] fs.protected_hardlinks = 1 [2025-09-24 03:39:46.478] fs.protected_symlinks = 1 [2025-09-24 03:39:46.494] kernel.modules_disabled = 1 [2025-09-24 03:39:46.685] [2025-09-24 03:39:46.685] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:39:47.969] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:39:55.764] SBL1:1210.0.1.0 [2025-09-24 03:39:55.796] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:39:57.379] SBL2:1210.0.1.0 [2025-09-24 03:39:57.411] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:39:57.523] j-A [2025-09-24 03:40:04.861] The R5 Autosar Classic is running [2025-09-24 03:40:04.892] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:40:04.892] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:40:05.500] INIT: version 2.96 booting [2025-09-24 03:40:05.612] INIT: Entering runlevel: 5 [2025-09-24 03:40:05.755] mtd24 attached [2025-09-24 03:40:05.771] mtd28 attached [2025-09-24 03:40:05.787] mtd32 attached [2025-09-24 03:40:05.885] ubi0:textures is mounted. [2025-09-24 03:40:05.885] RTNETLINK answers: File exists [2025-09-24 03:40:05.885] ubi1:animations is mounted. [2025-09-24 03:40:05.885] ubi2:dml_code is mounted. [2025-09-24 03:40:05.885] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:40:05.885] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:40:05.885] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:40:05.885] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:40:05.885] data.LB_FadeInType0=100 [2025-09-24 03:40:05.885] data.CHLH_FadeInType0=0 [2025-09-24 03:40:05.885] data.WU_FadeInDelay=0 [2025-09-24 03:40:05.885] max_time_out=0 [2025-09-24 03:40:05.885] No splash screen [2025-09-24 03:40:05.885] stop dss Done [2025-09-24 03:40:05.885] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:40:05.932] /dev/mem opened. [2025-09-24 03:40:05.932] Memory mapped at address 0xffff974c1000. [2025-09-24 03:40:05.964] Read at address 0x00600018 (0xffff974c1018): 0x00000000 [2025-09-24 03:40:05.964] Write at address 0x00600018 (0xffff974c1018): 0x00400040, readback 0x00400040 [2025-09-24 03:40:05.964] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:40:05.964] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:40:06.172] Loaded PowerVR consumer services. [2025-09-24 03:40:06.233] Waiting data available... [2025-09-24 03:40:06.233] 512+0 records in [2025-09-24 03:40:06.233] 512+0 records out [2025-09-24 03:40:06.265] Starting syslogd/klogd: done [2025-09-24 03:40:06.281] DML Start [2025-09-24 03:40:06.425] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:40:06.665] DML res1: 0 [2025-09-24 03:40:07.119] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:40:07.119] Read Success [2025-09-24 03:40:07.119] Verifying certificate... [2025-09-24 03:40:07.342] Verified OK [2025-09-24 03:40:07.358] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:40:08.907] Verified OK [2025-09-24 03:40:08.907] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:40:09.506] Verified OK [2025-09-24 03:40:09.506] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:40:12.304] fs.protected_hardlinks = 1 [2025-09-24 03:40:12.320] fs.protected_symlinks = 1 [2025-09-24 03:40:12.320] kernel.modules_disabled = 1 [2025-09-24 03:40:12.527] [2025-09-24 03:40:12.527] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:40:13.734] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:40:21.550] SBL1:1210.0.1.0 [2025-09-24 03:40:21.582] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:40:23.165] SBL2:1210.0.1.0 [2025-09-24 03:40:23.197] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:40:23.309] j-A [2025-09-24 03:40:30.682] The R5 Autosar Classic is running [2025-09-24 03:40:30.682] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:40:30.682] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:40:31.290] INIT: version 2.96 booting [2025-09-24 03:40:31.385] INIT: Entering runlevel: 5 [2025-09-24 03:40:31.546] mtd24 attached [2025-09-24 03:40:31.562] mtd28 attached [2025-09-24 03:40:31.562] mtd32 attached [2025-09-24 03:40:31.662] ubi0:textures is mounted. [2025-09-24 03:40:31.662] RTNETLINK answers: File exists [2025-09-24 03:40:31.662] ubi1:animations is mounted. [2025-09-24 03:40:31.662] ubi2:dml_code is mounted. [2025-09-24 03:40:31.662] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:40:31.662] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:40:31.662] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:40:31.662] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:40:31.662] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:40:31.683] data.LB_FadeInType0=100 [2025-09-24 03:40:31.683] data.CHLH_FadeInType0=0 [2025-09-24 03:40:31.683] data.WU_FadeInDelay=0 [2025-09-24 03:40:31.683] max_time_out=0 [2025-09-24 03:40:31.683] No splash screen [2025-09-24 03:40:31.683] stop dss Done [2025-09-24 03:40:31.777] /dev/mem opened. [2025-09-24 03:40:31.777] Memory mapped at address 0xffffb135e000. [2025-09-24 03:40:31.777] Read at address 0x00600018 (0xffffb135e018): 0x00000000 [2025-09-24 03:40:31.777] Write at address 0x00600018 (0xffffb135e018): 0x00400040, readback 0x00400040 [2025-09-24 03:40:31.777] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:40:31.777] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:40:31.840] Loaded PowerVR consumer services. [2025-09-24 03:40:31.984] 512+0 records in [2025-09-24 03:40:31.984] 512+0 records out [2025-09-24 03:40:31.984] Waiting data available... [2025-09-24 03:40:32.017] Starting syslogd/klogd: done [2025-09-24 03:40:32.033] DML Start [2025-09-24 03:40:32.192] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:40:32.464] DML res1: 0 [2025-09-24 03:40:32.783] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:40:32.804] Read Success [2025-09-24 03:40:32.804] Verifying certificate... [2025-09-24 03:40:33.012] Verified OK [2025-09-24 03:40:33.029] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:40:34.634] Verified OK [2025-09-24 03:40:34.634] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:40:35.284] Verified OK [2025-09-24 03:40:35.284] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:40:38.049] fs.protected_hardlinks = 1 [2025-09-24 03:40:38.049] fs.protected_symlinks = 1 [2025-09-24 03:40:38.049] kernel.modules_disabled = 1 [2025-09-24 03:40:38.225] [2025-09-24 03:40:38.225] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:40:39.536] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:40:47.360] SBL1:1210.0.1.0 [2025-09-24 03:40:47.392] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:40:48.974] SBL2:1210.0.1.0 [2025-09-24 03:40:49.006] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:40:49.118] j-A [2025-09-24 03:40:56.459] The R5 Autosar Classic is running [2025-09-24 03:40:56.484] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:40:56.484] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:40:57.091] INIT: version 2.96 booting [2025-09-24 03:40:57.203] INIT: Entering runlevel: 5 [2025-09-24 03:40:57.363] mtd32 attached [2025-09-24 03:40:57.363] mtd28 attached [2025-09-24 03:40:57.379] mtd24 attached [2025-09-24 03:40:57.462] RTNETLINK answers: File exists [2025-09-24 03:40:57.462] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:40:57.462] ubi2:textures is mounted. [2025-09-24 03:40:57.462] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:40:57.462] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:40:57.462] ubi0:dml_code is mounted. [2025-09-24 03:40:57.462] ubi1:animations is mounted. [2025-09-24 03:40:57.462] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:40:57.462] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:40:57.491] data.LB_FadeInType0=100 [2025-09-24 03:40:57.491] data.CHLH_FadeInType0=0 [2025-09-24 03:40:57.491] data.WU_FadeInDelay=0 [2025-09-24 03:40:57.491] max_time_out=0 [2025-09-24 03:40:57.491] No splash screen [2025-09-24 03:40:57.491] stop dss Done [2025-09-24 03:40:57.516] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:40:57.516] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:40:57.573] /dev/mem opened. [2025-09-24 03:40:57.573] Memory mapped at address 0xffff8e25c000. [2025-09-24 03:40:57.573] Read at address 0x00600018 (0xffff8e25c018): 0x00000000 [2025-09-24 03:40:57.573] Write at address 0x00600018 (0xffff8e25c018): 0x00400040, readback 0x00400040 [2025-09-24 03:40:57.750] Loaded PowerVR consumer services. [2025-09-24 03:40:57.798] 512+0 records in [2025-09-24 03:40:57.798] 512+0 records out [2025-09-24 03:40:57.813] Waiting data available... [2025-09-24 03:40:57.829] Starting syslogd/klogd: done [2025-09-24 03:40:57.861] DML Start [2025-09-24 03:40:58.038] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:40:58.261] DML res1: 0 [2025-09-24 03:40:58.692] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:40:58.692] Read Success [2025-09-24 03:40:58.692] Verifying certificate... [2025-09-24 03:40:58.915] Verified OK [2025-09-24 03:40:58.948] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:41:00.698] Verified OK [2025-09-24 03:41:00.698] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:41:01.257] Verified OK [2025-09-24 03:41:01.257] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:41:03.863] fs.protected_hardlinks = 1 [2025-09-24 03:41:03.863] fs.protected_symlinks = 1 [2025-09-24 03:41:03.879] kernel.modules_disabled = 1 [2025-09-24 03:41:04.054] [2025-09-24 03:41:04.070] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:41:05.340] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:41:13.161] SBL1:1210.0.1.0 [2025-09-24 03:41:13.209] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:41:14.776] SBL2:1210.0.1.0 [2025-09-24 03:41:14.808] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:41:14.919] j-A [2025-09-24 03:41:22.277] The R5 Autosar Classic is running [2025-09-24 03:41:22.277] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:41:22.298] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:41:22.905] INIT: version 2.96 booting [2025-09-24 03:41:23.017] INIT: Entering runlevel: 5 [2025-09-24 03:41:23.177] mtd32 attached [2025-09-24 03:41:23.177] mtd28 attached [2025-09-24 03:41:23.193] mtd24 attached [2025-09-24 03:41:23.241] RTNETLINK answers: File exists [2025-09-24 03:41:23.241] ubi0:dml_code is mounted. [2025-09-24 03:41:23.301] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:41:23.301] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:41:23.301] ubi2:textures is mounted. [2025-09-24 03:41:23.301] ubi1:animations is mounted. [2025-09-24 03:41:23.301] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:41:23.301] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:41:23.301] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:41:23.301] data.LB_FadeInType0=100 [2025-09-24 03:41:23.301] data.CHLH_FadeInType0=0 [2025-09-24 03:41:23.301] data.WU_FadeInDelay=0 [2025-09-24 03:41:23.301] max_time_out=0 [2025-09-24 03:41:23.301] No splash screen [2025-09-24 03:41:23.301] stop dss Done [2025-09-24 03:41:23.348] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:41:23.383] /dev/mem opened. [2025-09-24 03:41:23.383] Memory mapped at address 0xffffb7d6a000. [2025-09-24 03:41:23.383] Read at address 0x00600018 (0xffffb7d6a018): 0x00000000 [2025-09-24 03:41:23.383] Write at address 0x00600018 (0xffffb7d6a018): 0x00400040, readback 0x00400040 [2025-09-24 03:41:23.383] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:41:23.463] Loaded PowerVR consumer services. [2025-09-24 03:41:23.631] 512+0 records in [2025-09-24 03:41:23.631] 512+0 records out [2025-09-24 03:41:23.631] Waiting data available... [2025-09-24 03:41:23.662] Starting syslogd/klogd: done [2025-09-24 03:41:23.678] DML Start [2025-09-24 03:41:23.823] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:41:24.078] DML res1: 0 [2025-09-24 03:41:24.557] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:41:24.557] Read Success [2025-09-24 03:41:24.557] Verifying certificate... [2025-09-24 03:41:24.797] Verified OK [2025-09-24 03:41:24.813] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:41:26.571] Verified OK [2025-09-24 03:41:26.571] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:41:27.097] Verified OK [2025-09-24 03:41:27.097] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:41:29.593] fs.protected_hardlinks = 1 [2025-09-24 03:41:29.593] fs.protected_symlinks = 1 [2025-09-24 03:41:29.608] kernel.modules_disabled = 1 [2025-09-24 03:41:29.800] [2025-09-24 03:41:29.800] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:41:31.174] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:41:38.949] SBL1:1210.0.1.0 [2025-09-24 03:41:38.997] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:41:40.564] SBL2:1210.0.1.0 [2025-09-24 03:41:40.612] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:41:40.708] j-A [2025-09-24 03:41:48.064] The R5 Autosar Classic is running [2025-09-24 03:41:48.064] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:41:48.085] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:41:48.693] INIT: version 2.96 booting [2025-09-24 03:41:48.804] INIT: Entering runlevel: 5 [2025-09-24 03:41:48.965] mtd32 attached [2025-09-24 03:41:48.965] mtd24 attached [2025-09-24 03:41:48.981] mtd28 attached [2025-09-24 03:41:49.063] RTNETLINK answers: File exists [2025-09-24 03:41:49.063] ubi0:dml_code is mounted. [2025-09-24 03:41:49.063] ubi1:textures is mounted. [2025-09-24 03:41:49.063] ubi2:animations is mounted. [2025-09-24 03:41:49.063] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:41:49.063] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:41:49.063] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:41:49.063] data.LB_FadeInType0=100 [2025-09-24 03:41:49.098] data.CHLH_FadeInType0=0 [2025-09-24 03:41:49.098] data.WU_FadeInDelay=0 [2025-09-24 03:41:49.098] max_time_out=0 [2025-09-24 03:41:49.098] No splash screen [2025-09-24 03:41:49.098] stop dss Done [2025-09-24 03:41:49.098] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:41:49.098] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:41:49.169] /dev/mem opened. [2025-09-24 03:41:49.169] Memory mapped at address 0xffff90f21000. [2025-09-24 03:41:49.169] Read at address 0x00600018 (0xffff90f21018): 0x00000000 [2025-09-24 03:41:49.169] Write at address 0x00600018 (0xffff90f21018): 0x00400040, readback 0x00400040 [2025-09-24 03:41:49.185] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:41:49.201] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:41:49.361] Loaded PowerVR consumer services. [2025-09-24 03:41:49.409] 512+0 records in [2025-09-24 03:41:49.409] 512+0 records out [2025-09-24 03:41:49.441] Waiting data available... [2025-09-24 03:41:49.456] Starting syslogd/klogd: done [2025-09-24 03:41:49.472] DML Start [2025-09-24 03:41:49.648] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:41:49.872] DML res1: 0 [2025-09-24 03:41:50.381] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:41:50.381] Read Success [2025-09-24 03:41:50.381] Verifying certificate... [2025-09-24 03:41:50.621] Verified OK [2025-09-24 03:41:50.637] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:41:52.316] Verified OK [2025-09-24 03:41:52.332] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:41:52.907] Verified OK [2025-09-24 03:41:52.907] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:41:55.498] fs.protected_hardlinks = 1 [2025-09-24 03:41:55.514] fs.protected_symlinks = 1 [2025-09-24 03:41:55.514] kernel.modules_disabled = 1 [2025-09-24 03:41:55.722] [2025-09-24 03:41:55.722] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:41:56.953] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:42:04.764] SBL1:1210.0.1.0 [2025-09-24 03:42:04.795] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:42:06.379] SBL2:1210.0.1.0 [2025-09-24 03:42:06.411] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:42:06.523] j-A [2025-09-24 03:42:13.862] The R5 Autosar Classic is running [2025-09-24 03:42:13.893] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:42:13.893] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:42:14.502] INIT: version 2.96 booting [2025-09-24 03:42:14.613] INIT: Entering runlevel: 5 [2025-09-24 03:42:14.757] mtd28 attached [2025-09-24 03:42:14.773] mtd32 attached [2025-09-24 03:42:14.773] mtd24 attached [2025-09-24 03:42:14.821] RTNETLINK answers: File exists [2025-09-24 03:42:14.870] ubi0:animations is mounted. [2025-09-24 03:42:14.870] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:42:14.870] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:42:14.870] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:42:14.870] ubi2:textures is mounted. [2025-09-24 03:42:14.870] ubi1:dml_code is mounted. [2025-09-24 03:42:14.870] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:42:14.870] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:42:14.898] data.LB_FadeInType0=100 [2025-09-24 03:42:14.898] data.CHLH_FadeInType0=0 [2025-09-24 03:42:14.898] data.WU_FadeInDelay=0 [2025-09-24 03:42:14.898] max_time_out=0 [2025-09-24 03:42:14.898] No splash screen [2025-09-24 03:42:14.898] stop dss Done [2025-09-24 03:42:14.926] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:42:14.926] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:42:14.977] /dev/mem opened. [2025-09-24 03:42:14.977] Memory mapped at address 0xffff85ffa000. [2025-09-24 03:42:14.977] Read at address 0x00600018 (0xffff85ffa018): 0x00000000 [2025-09-24 03:42:14.977] Write at address 0x00600018 (0xffff85ffa018): 0x00400040, readback 0x00400040 [2025-09-24 03:42:15.121] Loaded PowerVR consumer services. [2025-09-24 03:42:15.223] 512+0 records in [2025-09-24 03:42:15.223] 512+0 records out [2025-09-24 03:42:15.223] Waiting data available... [2025-09-24 03:42:15.255] Starting syslogd/klogd: done [2025-09-24 03:42:15.271] DML Start [2025-09-24 03:42:15.463] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:42:15.703] DML res1: 0 [2025-09-24 03:42:16.115] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:42:16.115] Read Success [2025-09-24 03:42:16.115] Verifying certificate... [2025-09-24 03:42:16.339] Verified OK [2025-09-24 03:42:16.355] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:42:17.945] Verified OK [2025-09-24 03:42:17.945] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:42:18.532] Verified OK [2025-09-24 03:42:18.532] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:42:21.171] fs.protected_hardlinks = 1 [2025-09-24 03:42:21.187] fs.protected_symlinks = 1 [2025-09-24 03:42:21.187] kernel.modules_disabled = 1 [2025-09-24 03:42:21.379] [2025-09-24 03:42:21.379] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:42:22.782] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:42:30.552] SBL1:1210.0.1.0 [2025-09-24 03:42:30.600] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:42:32.166] SBL2:1210.0.1.0 [2025-09-24 03:42:32.198] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:42:32.310] j-A [2025-09-24 03:42:39.665] The R5 Autosar Classic is running [2025-09-24 03:42:39.665] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:42:39.686] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:42:40.294] INIT: version 2.96 booting [2025-09-24 03:42:40.406] INIT: Entering runlevel: 5 [2025-09-24 03:42:40.566] mtd24 attached [2025-09-24 03:42:40.582] mtd28 attached [2025-09-24 03:42:40.582] mtd32 attached [2025-09-24 03:42:40.630] ubi0:textures is mounted. [2025-09-24 03:42:40.630] RTNETLINK answers: File exists [2025-09-24 03:42:40.646] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:42:40.646] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:42:40.696] ubi1:animations is mounted. [2025-09-24 03:42:40.696] ubi2:dml_code is mounted. [2025-09-24 03:42:40.696] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:42:40.696] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:42:40.696] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:42:40.696] data.LB_FadeInType0=100 [2025-09-24 03:42:40.696] data.CHLH_FadeInType0=0 [2025-09-24 03:42:40.696] data.WU_FadeInDelay=0 [2025-09-24 03:42:40.696] max_time_out=0 [2025-09-24 03:42:40.696] No splash screen [2025-09-24 03:42:40.696] stop dss Done [2025-09-24 03:42:40.767] /dev/mem opened. [2025-09-24 03:42:40.767] Memory mapped at address 0xffffafd03000. [2025-09-24 03:42:40.767] Read at address 0x00600018 (0xffffafd03018): 0x00000000 [2025-09-24 03:42:40.767] Write at address 0x00600018 (0xffffafd03018): 0x00400040, readback 0x00400040 [2025-09-24 03:42:40.767] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:42:40.767] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:42:40.991] Loaded PowerVR consumer services. [2025-09-24 03:42:41.007] Waiting data available... [2025-09-24 03:42:41.023] 512+0 records in [2025-09-24 03:42:41.039] 512+0 records out [2025-09-24 03:42:41.055] Starting syslogd/klogd: done [2025-09-24 03:42:41.071] DML Start [2025-09-24 03:42:41.214] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:42:41.390] DML res1: 0 [2025-09-24 03:42:41.982] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:42:42.003] Read Success [2025-09-24 03:42:42.003] Verifying certificate... [2025-09-24 03:42:42.226] Verified OK [2025-09-24 03:42:42.226] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:42:43.962] Verified OK [2025-09-24 03:42:43.962] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:42:44.487] Verified OK [2025-09-24 03:42:44.487] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:42:46.982] fs.protected_hardlinks = 1 [2025-09-24 03:42:46.982] fs.protected_symlinks = 1 [2025-09-24 03:42:46.998] kernel.modules_disabled = 1 [2025-09-24 03:42:47.189] [2025-09-24 03:42:47.189] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:42:48.576] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:42:56.370] SBL1:1210.0.1.0 [2025-09-24 03:42:56.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:42:57.986] SBL2:1210.0.1.0 [2025-09-24 03:42:58.018] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:42:58.130] j-A [2025-09-24 03:43:05.501] The R5 Autosar Classic is running [2025-09-24 03:43:05.501] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:43:05.501] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:43:06.108] INIT: version 2.96 booting [2025-09-24 03:43:06.204] INIT: Entering runlevel: 5 [2025-09-24 03:43:06.364] mtd28 attached [2025-09-24 03:43:06.380] mtd24 attached [2025-09-24 03:43:06.396] mtd32 attached [2025-09-24 03:43:06.427] RTNETLINK answers: File exists [2025-09-24 03:43:06.476] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:43:06.476] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:43:06.476] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:43:06.476] ubi1:textures is mounted. [2025-09-24 03:43:06.476] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:43:06.476] ubi0:animations is mounted. [2025-09-24 03:43:06.476] ubi2:dml_code is mounted. [2025-09-24 03:43:06.476] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:43:06.501] data.LB_FadeInType0=100 [2025-09-24 03:43:06.501] data.CHLH_FadeInType0=0 [2025-09-24 03:43:06.501] data.WU_FadeInDelay=0 [2025-09-24 03:43:06.501] max_time_out=0 [2025-09-24 03:43:06.501] No splash screen [2025-09-24 03:43:06.501] stop dss Done [2025-09-24 03:43:06.534] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:43:06.550] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:43:06.591] /dev/mem opened. [2025-09-24 03:43:06.591] Memory mapped at address 0xffffa7194000. [2025-09-24 03:43:06.591] Read at address 0x00600018 (0xffffa7194018): 0x00000000 [2025-09-24 03:43:06.591] Write at address 0x00600018 (0xffffa7194018): 0x00400040, readback 0x00400040 [2025-09-24 03:43:06.654] Loaded PowerVR consumer services. [2025-09-24 03:43:06.798] 512+0 records in [2025-09-24 03:43:06.798] 512+0 records out [2025-09-24 03:43:06.814] Waiting data available... [2025-09-24 03:43:06.846] Starting syslogd/klogd: done [2025-09-24 03:43:06.862] DML Start [2025-09-24 03:43:07.022] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:43:07.214] DML res1: 0 [2025-09-24 03:43:07.710] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:43:07.731] Read Success [2025-09-24 03:43:07.731] Verifying certificate... [2025-09-24 03:43:07.971] Verified OK [2025-09-24 03:43:08.003] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:43:09.628] Verified OK [2025-09-24 03:43:09.628] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:43:10.200] Verified OK [2025-09-24 03:43:10.200] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:43:13.015] fs.protected_hardlinks = 1 [2025-09-24 03:43:13.031] fs.protected_symlinks = 1 [2025-09-24 03:43:13.031] kernel.modules_disabled = 1 [2025-09-24 03:43:13.240] [2025-09-24 03:43:13.240] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:43:14.363] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:43:22.173] SBL1:1210.0.1.0 [2025-09-24 03:43:22.221] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:43:23.787] SBL2:1210.0.1.0 [2025-09-24 03:43:23.819] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:43:23.931] j-A [2025-09-24 03:43:31.286] The R5 Autosar Classic is running [2025-09-24 03:43:31.286] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:43:31.307] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:43:31.915] INIT: version 2.96 booting [2025-09-24 03:43:32.026] INIT: Entering runlevel: 5 [2025-09-24 03:43:32.186] mtd32 attached [2025-09-24 03:43:32.186] mtd24 attached [2025-09-24 03:43:32.202] mtd28 attached [2025-09-24 03:43:32.250] ubi0:dml_code is mounted. [2025-09-24 03:43:32.250] RTNETLINK answers: File exists [2025-09-24 03:43:32.296] ubi1:textures is mounted. [2025-09-24 03:43:32.296] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:43:32.296] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:43:32.296] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:43:32.296] ubi2:animations is mounted. [2025-09-24 03:43:32.296] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:43:32.296] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:43:32.324] data.LB_FadeInType0=100 [2025-09-24 03:43:32.324] data.CHLH_FadeInType0=0 [2025-09-24 03:43:32.324] data.WU_FadeInDelay=0 [2025-09-24 03:43:32.324] max_time_out=0 [2025-09-24 03:43:32.324] No splash screen [2025-09-24 03:43:32.324] stop dss Done [2025-09-24 03:43:32.351] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:43:32.351] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:43:32.402] /dev/mem opened. [2025-09-24 03:43:32.402] Memory mapped at address 0xffffaa1e8000. [2025-09-24 03:43:32.402] Read at address 0x00600018 (0xffffaa1e8018): 0x00000000 [2025-09-24 03:43:32.402] Write at address 0x00600018 (0xffffaa1e8018): 0x00400040, readback 0x00400040 [2025-09-24 03:43:32.513] Loaded PowerVR consumer services. [2025-09-24 03:43:32.649] 512+0 records in [2025-09-24 03:43:32.649] 512+0 records out [2025-09-24 03:43:32.649] Waiting data available... [2025-09-24 03:43:32.665] Starting syslogd/klogd: done [2025-09-24 03:43:32.697] DML Start [2025-09-24 03:43:32.842] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:43:33.018] DML res1: 0 [2025-09-24 03:43:33.558] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:43:33.558] Read Success [2025-09-24 03:43:33.558] Verifying certificate... [2025-09-24 03:43:33.830] Verified OK [2025-09-24 03:43:33.846] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:43:35.493] Verified OK [2025-09-24 03:43:35.493] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:43:36.107] Verified OK [2025-09-24 03:43:36.107] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:43:38.730] fs.protected_hardlinks = 1 [2025-09-24 03:43:38.746] fs.protected_symlinks = 1 [2025-09-24 03:43:38.746] kernel.modules_disabled = 1 [2025-09-24 03:43:38.938] [2025-09-24 03:43:38.938] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:43:40.105] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:43:47.987] SBL1:1210.0.1.0 [2025-09-24 03:43:48.019] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:43:49.603] SBL2:1210.0.1.0 [2025-09-24 03:43:49.635] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:43:49.746] j-A [2025-09-24 03:43:57.086] The R5 Autosar Classic is running [2025-09-24 03:43:57.117] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:43:57.117] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:43:57.724] INIT: version 2.96 booting [2025-09-24 03:43:57.821] INIT: Entering runlevel: 5 [2025-09-24 03:43:57.980] mtd24 attached [2025-09-24 03:43:57.996] mtd28 attached [2025-09-24 03:43:57.996] mtd32 attached [2025-09-24 03:43:58.045] RTNETLINK answers: File exists [2025-09-24 03:43:58.093] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:43:58.093] ubi1:animations is mounted. [2025-09-24 03:43:58.093] ubi0:textures is mounted. [2025-09-24 03:43:58.093] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:43:58.093] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:43:58.093] ubi2:dml_code is mounted. [2025-09-24 03:43:58.093] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:43:58.093] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:43:58.116] data.LB_FadeInType0=100 [2025-09-24 03:43:58.116] data.CHLH_FadeInType0=0 [2025-09-24 03:43:58.116] data.WU_FadeInDelay=0 [2025-09-24 03:43:58.116] max_time_out=0 [2025-09-24 03:43:58.116] No splash screen [2025-09-24 03:43:58.116] stop dss Done [2025-09-24 03:43:58.132] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:43:58.147] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:43:58.163] /dev/mem opened. [2025-09-24 03:43:58.163] Memory mapped at address 0xffff9f367000. [2025-09-24 03:43:58.189] Read at address 0x00600018 (0xffff9f367018): 0x00000000 [2025-09-24 03:43:58.189] Write at address 0x00600018 (0xffff9f367018): 0x00400040, readback 0x00400040 [2025-09-24 03:43:58.430] Loaded PowerVR consumer services. [2025-09-24 03:43:58.461] 512+0 records in [2025-09-24 03:43:58.461] 512+0 records out [2025-09-24 03:43:58.477] Waiting data available... [2025-09-24 03:43:58.509] Starting syslogd/klogd: done [2025-09-24 03:43:58.525] DML Start [2025-09-24 03:43:58.702] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:43:58.925] DML res1: 0 [2025-09-24 03:43:59.356] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:43:59.356] Read Success [2025-09-24 03:43:59.372] Verifying certificate... [2025-09-24 03:43:59.628] Verified OK [2025-09-24 03:43:59.644] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:44:01.189] Verified OK [2025-09-24 03:44:01.189] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:44:01.808] Verified OK [2025-09-24 03:44:01.808] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:44:04.558] fs.protected_hardlinks = 1 [2025-09-24 03:44:04.558] fs.protected_symlinks = 1 [2025-09-24 03:44:04.574] kernel.modules_disabled = 1 [2025-09-24 03:44:04.766] [2025-09-24 03:44:04.766] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:44:06.053] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:44:13.774] SBL1:1210.0.1.0 [2025-09-24 03:44:13.822] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:44:15.406] SBL2:1210.0.1.0 [2025-09-24 03:44:15.437] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:44:15.549] j-A [2025-09-24 03:44:22.889] The R5 Autosar Classic is running [2025-09-24 03:44:22.914] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:44:22.914] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:44:23.521] INIT: version 2.96 booting [2025-09-24 03:44:23.633] INIT: Entering runlevel: 5 [2025-09-24 03:44:23.793] mtd32 attached [2025-09-24 03:44:23.793] mtd28 attached [2025-09-24 03:44:23.809] mtd24 attached [2025-09-24 03:44:23.857] RTNETLINK answers: File exists [2025-09-24 03:44:23.921] ubi1:animations is mounted. [2025-09-24 03:44:23.921] ubi0:dml_code is mounted. [2025-09-24 03:44:23.921] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:44:23.921] ubi2:textures is mounted. [2025-09-24 03:44:23.921] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:44:23.921] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:44:23.921] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:44:23.921] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:44:23.921] data.LB_FadeInType0=100 [2025-09-24 03:44:23.921] data.CHLH_FadeInType0=0 [2025-09-24 03:44:23.921] data.WU_FadeInDelay=0 [2025-09-24 03:44:23.921] max_time_out=0 [2025-09-24 03:44:23.921] No splash screen [2025-09-24 03:44:23.921] stop dss Done [2025-09-24 03:44:23.969] /dev/mem opened. [2025-09-24 03:44:23.969] Memory mapped at address 0xffff853aa000. [2025-09-24 03:44:23.994] Read at address 0x00600018 (0xffff853aa018): 0x00000000 [2025-09-24 03:44:23.994] Write at address 0x00600018 (0xffff853aa018): 0x00400040, readback 0x00400040 [2025-09-24 03:44:23.994] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:44:24.011] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:44:24.186] Loaded PowerVR consumer services. [2025-09-24 03:44:24.267] 512+0 records in [2025-09-24 03:44:24.267] 512+0 records out [2025-09-24 03:44:24.283] Waiting data available... [2025-09-24 03:44:24.315] Starting syslogd/klogd: done [2025-09-24 03:44:24.331] DML Start [2025-09-24 03:44:24.506] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:44:24.715] DML res1: 0 [2025-09-24 03:44:25.201] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:44:25.201] Read Success [2025-09-24 03:44:25.201] Verifying certificate... [2025-09-24 03:44:25.457] Verified OK [2025-09-24 03:44:25.457] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:44:27.254] Verified OK [2025-09-24 03:44:27.254] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:44:27.749] Verified OK [2025-09-24 03:44:27.766] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:44:30.196] fs.protected_hardlinks = 1 [2025-09-24 03:44:30.212] fs.protected_symlinks = 1 [2025-09-24 03:44:30.228] kernel.modules_disabled = 1 [2025-09-24 03:44:30.420] [2025-09-24 03:44:30.420] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:44:31.823] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:44:39.569] SBL1:1210.0.1.0 [2025-09-24 03:44:39.617] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:44:41.185] SBL2:1210.0.1.0 [2025-09-24 03:44:41.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:44:41.328] j-A [2025-09-24 03:44:48.705] The R5 Autosar Classic is running [2025-09-24 03:44:48.705] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:44:48.705] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:44:49.312] INIT: version 2.96 booting [2025-09-24 03:44:49.423] INIT: Entering runlevel: 5 [2025-09-24 03:44:49.584] mtd28 attached [2025-09-24 03:44:49.584] mtd24 attached [2025-09-24 03:44:49.600] mtd32 attached [2025-09-24 03:44:49.648] ubi0:animations is mounted. [2025-09-24 03:44:49.648] RTNETLINK answers: File exists [2025-09-24 03:44:49.689] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:44:49.690] ubi1:textures is mounted. [2025-09-24 03:44:49.690] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:44:49.690] ubi2:dml_code is mounted. [2025-09-24 03:44:49.690] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:44:49.690] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:44:49.690] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:44:49.710] data.LB_FadeInType0=100 [2025-09-24 03:44:49.710] data.CHLH_FadeInType0=0 [2025-09-24 03:44:49.710] data.WU_FadeInDelay=0 [2025-09-24 03:44:49.710] max_time_out=0 [2025-09-24 03:44:49.710] No splash screen [2025-09-24 03:44:49.710] stop dss Done [2025-09-24 03:44:49.726] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:44:49.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:44:49.787] /dev/mem opened. [2025-09-24 03:44:49.787] Memory mapped at address 0xffff872cd000. [2025-09-24 03:44:49.787] Read at address 0x00600018 (0xffff872cd018): 0x00000000 [2025-09-24 03:44:49.787] Write at address 0x00600018 (0xffff872cd018): 0x00400040, readback 0x00400040 [2025-09-24 03:44:49.978] Loaded PowerVR consumer services. [2025-09-24 03:44:50.073] Waiting data available... [2025-09-24 03:44:50.073] 512+0 records in [2025-09-24 03:44:50.073] 512+0 records out [2025-09-24 03:44:50.089] Starting syslogd/klogd: done [2025-09-24 03:44:50.105] DML Start [2025-09-24 03:44:50.280] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:44:50.472] DML res1: 0 [2025-09-24 03:44:50.998] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:44:50.998] Read Success [2025-09-24 03:44:50.998] Verifying certificate... [2025-09-24 03:44:51.270] Verified OK [2025-09-24 03:44:51.286] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:44:52.884] Verified OK [2025-09-24 03:44:52.884] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:44:53.501] Verified OK [2025-09-24 03:44:53.501] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:44:56.075] fs.protected_hardlinks = 1 [2025-09-24 03:44:56.091] fs.protected_symlinks = 1 [2025-09-24 03:44:56.091] kernel.modules_disabled = 1 [2025-09-24 03:44:56.283] [2025-09-24 03:44:56.283] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:44:57.610] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:45:05.374] SBL1:1210.0.1.0 [2025-09-24 03:45:05.422] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:45:06.989] SBL2:1210.0.1.0 [2025-09-24 03:45:07.037] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:45:07.133] j-A [2025-09-24 03:45:14.509] The R5 Autosar Classic is running [2025-09-24 03:45:14.509] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:45:14.509] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:45:15.117] INIT: version 2.96 booting [2025-09-24 03:45:15.229] INIT: Entering runlevel: 5 [2025-09-24 03:45:15.372] mtd24 attached [2025-09-24 03:45:15.388] mtd32 attached [2025-09-24 03:45:15.404] mtd28 attached [2025-09-24 03:45:15.453] RTNETLINK answers: File exists [2025-09-24 03:45:15.453] ubi0:textures is mounted. [2025-09-24 03:45:15.513] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:45:15.513] ubi2:animations is mounted. [2025-09-24 03:45:15.513] ubi1:dml_code is mounted. [2025-09-24 03:45:15.513] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:45:15.513] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:45:15.513] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:45:15.513] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:45:15.513] data.LB_FadeInType0=100 [2025-09-24 03:45:15.513] data.CHLH_FadeInType0=0 [2025-09-24 03:45:15.513] data.WU_FadeInDelay=0 [2025-09-24 03:45:15.513] max_time_out=0 [2025-09-24 03:45:15.513] No splash screen [2025-09-24 03:45:15.513] stop dss Done [2025-09-24 03:45:15.544] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:45:15.544] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:45:15.560] /dev/mem opened. [2025-09-24 03:45:15.586] Memory mapped at address 0xffffa1b47000. [2025-09-24 03:45:15.586] Read at address 0x00600018 (0xffffa1b47018): 0x00000000 [2025-09-24 03:45:15.586] Write at address 0x00600018 (0xffffa1b47018): 0x00400040, readback 0x00400040 [2025-09-24 03:45:15.699] Loaded PowerVR consumer services. [2025-09-24 03:45:15.849] Waiting data available... [2025-09-24 03:45:15.849] 512+0 records in [2025-09-24 03:45:15.849] 512+0 records out [2025-09-24 03:45:15.881] Starting syslogd/klogd: done [2025-09-24 03:45:15.897] DML Start [2025-09-24 03:45:16.121] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:45:16.360] DML res1: 0 [2025-09-24 03:45:16.697] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:45:16.718] Read Success [2025-09-24 03:45:16.718] Verifying certificate... [2025-09-24 03:45:16.974] Verified OK [2025-09-24 03:45:16.990] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:45:18.753] Verified OK [2025-09-24 03:45:18.753] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:45:19.313] Verified OK [2025-09-24 03:45:19.313] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:45:21.886] fs.protected_hardlinks = 1 [2025-09-24 03:45:21.886] fs.protected_symlinks = 1 [2025-09-24 03:45:21.902] kernel.modules_disabled = 1 [2025-09-24 03:45:22.110] [2025-09-24 03:45:22.110] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:45:23.389] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:45:31.176] SBL1:1210.0.1.0 [2025-09-24 03:45:31.224] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:45:32.791] SBL2:1210.0.1.0 [2025-09-24 03:45:32.823] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:45:32.935] j-A [2025-09-24 03:45:40.310] The R5 Autosar Classic is running [2025-09-24 03:45:40.310] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:45:40.310] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:45:40.917] INIT: version 2.96 booting [2025-09-24 03:45:41.029] INIT: Entering runlevel: 5 [2025-09-24 03:45:41.173] mtd28 attached [2025-09-24 03:45:41.189] mtd32 attached [2025-09-24 03:45:41.189] mtd24 attached [2025-09-24 03:45:41.307] RTNETLINK answers: File exists [2025-09-24 03:45:41.307] ubi0:animations is mounted. [2025-09-24 03:45:41.307] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:45:41.307] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:45:41.307] ubi2:textures is mounted. [2025-09-24 03:45:41.307] ubi1:dml_code is mounted. [2025-09-24 03:45:41.307] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:45:41.307] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:45:41.307] data.LB_FadeInType0=100 [2025-09-24 03:45:41.307] data.CHLH_FadeInType0=0 [2025-09-24 03:45:41.307] data.WU_FadeInDelay=0 [2025-09-24 03:45:41.307] max_time_out=0 [2025-09-24 03:45:41.307] No splash screen [2025-09-24 03:45:41.307] stop dss Done [2025-09-24 03:45:41.307] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:45:41.339] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:45:41.355] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:45:41.389] /dev/mem opened. [2025-09-24 03:45:41.389] Memory mapped at address 0xffff99514000. [2025-09-24 03:45:41.389] Read at address 0x00600018 (0xffff99514018): 0x00000000 [2025-09-24 03:45:41.389] Write at address 0x00600018 (0xffff99514018): 0x00400040, readback 0x00400040 [2025-09-24 03:45:41.469] Loaded PowerVR consumer services. [2025-09-24 03:45:41.638] Waiting data available... [2025-09-24 03:45:41.638] 512+0 records in [2025-09-24 03:45:41.638] 512+0 records out [2025-09-24 03:45:41.670] Starting syslogd/klogd: done [2025-09-24 03:45:41.686] DML Start [2025-09-24 03:45:41.861] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:45:42.118] DML res1: 0 [2025-09-24 03:45:42.498] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:45:42.498] Read Success [2025-09-24 03:45:42.498] Verifying certificate... [2025-09-24 03:45:42.706] Verified OK [2025-09-24 03:45:42.722] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:45:44.232] Verified OK [2025-09-24 03:45:44.232] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:45:44.839] Verified OK [2025-09-24 03:45:44.860] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:45:47.706] fs.protected_hardlinks = 1 [2025-09-24 03:45:47.706] fs.protected_symlinks = 1 [2025-09-24 03:45:47.722] kernel.modules_disabled = 1 [2025-09-24 03:45:47.914] [2025-09-24 03:45:47.914] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:45:49.230] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:45:56.981] SBL1:1210.0.1.0 [2025-09-24 03:45:57.013] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:45:58.596] SBL2:1210.0.1.0 [2025-09-24 03:45:58.628] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:45:58.740] j-A [2025-09-24 03:46:06.113] The R5 Autosar Classic is running [2025-09-24 03:46:06.113] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:46:06.113] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:46:06.721] INIT: version 2.96 booting [2025-09-24 03:46:06.832] INIT: Entering runlevel: 5 [2025-09-24 03:46:06.977] mtd24 attached [2025-09-24 03:46:06.993] mtd28 attached [2025-09-24 03:46:07.008] mtd32 attached [2025-09-24 03:46:07.024] ubi0:textures is mounted. [2025-09-24 03:46:07.056] RTNETLINK answers: File exists [2025-09-24 03:46:07.114] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:46:07.114] ubi1:animations is mounted. [2025-09-24 03:46:07.114] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:46:07.114] ubi2:dml_code is mounted. [2025-09-24 03:46:07.114] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:46:07.114] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:46:07.114] data.LB_FadeInType0=100 [2025-09-24 03:46:07.114] data.CHLH_FadeInType0=0 [2025-09-24 03:46:07.114] data.WU_FadeInDelay=0 [2025-09-24 03:46:07.114] max_time_out=0 [2025-09-24 03:46:07.114] No splash screen [2025-09-24 03:46:07.114] stop dss Done [2025-09-24 03:46:07.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:46:07.162] /dev/mem opened. [2025-09-24 03:46:07.162] Memory mapped at address 0xffff9e21f000. [2025-09-24 03:46:07.188] Read at address 0x00600018 (0xffff9e21f018): 0x00000000 [2025-09-24 03:46:07.188] Write at address 0x00600018 (0xffff9e21f018): 0x00400040, readback 0x00400040 [2025-09-24 03:46:07.220] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:46:07.237] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:46:07.396] Loaded PowerVR consumer services. [2025-09-24 03:46:07.428] 512+0 records in [2025-09-24 03:46:07.428] 512+0 records out [2025-09-24 03:46:07.444] Starting syslogd/klogd: done [2025-09-24 03:46:07.476] Waiting data available... [2025-09-24 03:46:07.476] DML Start [2025-09-24 03:46:07.684] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:46:07.907] DML res1: 0 [2025-09-24 03:46:08.366] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:46:08.366] Read Success [2025-09-24 03:46:08.366] Verifying certificate... [2025-09-24 03:46:08.623] Verified OK [2025-09-24 03:46:08.639] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:46:10.218] Verified OK [2025-09-24 03:46:10.218] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:46:10.885] Verified OK [2025-09-24 03:46:10.885] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:46:13.524] fs.protected_hardlinks = 1 [2025-09-24 03:46:13.540] fs.protected_symlinks = 1 [2025-09-24 03:46:13.540] kernel.modules_disabled = 1 [2025-09-24 03:46:13.732] [2025-09-24 03:46:13.732] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:46:14.958] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:46:22.804] SBL1:1210.0.1.0 [2025-09-24 03:46:22.852] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:46:24.419] SBL2:1210.0.1.0 [2025-09-24 03:46:24.467] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:46:24.563] j-A [2025-09-24 03:46:31.918] The R5 Autosar Classic is running [2025-09-24 03:46:31.940] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:46:31.940] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:46:32.548] INIT: version 2.96 booting [2025-09-24 03:46:32.659] INIT: Entering runlevel: 5 [2025-09-24 03:46:32.820] mtd24 attached [2025-09-24 03:46:32.820] mtd28 attached [2025-09-24 03:46:32.836] mtd32 attached [2025-09-24 03:46:32.852] ubi0:textures is mounted. [2025-09-24 03:46:32.883] RTNETLINK answers: File exists [2025-09-24 03:46:32.937] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:46:32.937] ubi1:animations is mounted. [2025-09-24 03:46:32.937] ubi2:dml_code is mounted. [2025-09-24 03:46:32.937] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:46:32.937] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:46:32.937] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:46:32.937] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:46:32.937] data.LB_FadeInType0=100 [2025-09-24 03:46:32.937] data.CHLH_FadeInType0=0 [2025-09-24 03:46:32.937] data.WU_FadeInDelay=0 [2025-09-24 03:46:32.937] max_time_out=0 [2025-09-24 03:46:32.937] No splash screen [2025-09-24 03:46:32.937] stop dss Done [2025-09-24 03:46:33.000] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:46:33.000] /dev/mem opened. [2025-09-24 03:46:33.000] Memory mapped at address 0xffffbd514000. [2025-09-24 03:46:33.000] Read at address 0x00600018 (0xffffbd514018): 0x00000000 [2025-09-24 03:46:33.000] Write at address 0x00600018 (0xffffbd514018): 0x00400040, readback 0x00400040 [2025-09-24 03:46:33.000] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:46:33.112] Loaded PowerVR consumer services. [2025-09-24 03:46:33.270] Waiting data available... [2025-09-24 03:46:33.270] 512+0 records in [2025-09-24 03:46:33.270] 512+0 records out [2025-09-24 03:46:33.302] Starting syslogd/klogd: done [2025-09-24 03:46:33.318] DML Start [2025-09-24 03:46:33.478] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:46:33.717] DML res1: 0 [2025-09-24 03:46:34.170] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:46:34.170] Read Success [2025-09-24 03:46:34.170] Verifying certificate... [2025-09-24 03:46:34.458] Verified OK [2025-09-24 03:46:34.474] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:46:36.073] Verified OK [2025-09-24 03:46:36.073] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:46:36.752] Verified OK [2025-09-24 03:46:36.752] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:46:39.438] fs.protected_hardlinks = 1 [2025-09-24 03:46:39.438] fs.protected_symlinks = 1 [2025-09-24 03:46:39.454] kernel.modules_disabled = 1 [2025-09-24 03:46:39.646] [2025-09-24 03:46:39.646] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:46:40.825] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:46:48.619] SBL1:1210.0.1.0 [2025-09-24 03:46:48.667] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:46:50.233] SBL2:1210.0.1.0 [2025-09-24 03:46:50.266] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:46:50.378] j-A [2025-09-24 03:46:57.731] The R5 Autosar Classic is running [2025-09-24 03:46:57.731] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:46:57.752] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:46:58.360] INIT: version 2.96 booting [2025-09-24 03:46:58.472] INIT: Entering runlevel: 5 [2025-09-24 03:46:58.632] mtd32 attached [2025-09-24 03:46:58.632] mtd28 attached [2025-09-24 03:46:58.648] mtd24 attached [2025-09-24 03:46:58.696] RTNETLINK answers: File exists [2025-09-24 03:46:58.764] ubi0:dml_code is mounted. [2025-09-24 03:46:58.764] ubi1:animations is mounted. [2025-09-24 03:46:58.764] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:46:58.764] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:46:58.764] ubi2:textures is mounted. [2025-09-24 03:46:58.764] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:46:58.764] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:46:58.764] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:46:58.764] data.LB_FadeInType0=100 [2025-09-24 03:46:58.764] data.CHLH_FadeInType0=0 [2025-09-24 03:46:58.764] data.WU_FadeInDelay=0 [2025-09-24 03:46:58.764] max_time_out=0 [2025-09-24 03:46:58.764] No splash screen [2025-09-24 03:46:58.764] stop dss Done [2025-09-24 03:46:58.846] /dev/mem opened. [2025-09-24 03:46:58.846] Memory mapped at address 0xffff8b9af000. [2025-09-24 03:46:58.846] Read at address 0x00600018 (0xffff8b9af018): 0x00000000 [2025-09-24 03:46:58.846] Write at address 0x00600018 (0xffff8b9af018): 0x00400040, readback 0x00400040 [2025-09-24 03:46:58.846] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:46:58.846] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:46:59.022] Loaded PowerVR consumer services. [2025-09-24 03:46:59.128] Waiting data available... [2025-09-24 03:46:59.128] 512+0 records in [2025-09-24 03:46:59.128] 512+0 records out [2025-09-24 03:46:59.160] Starting syslogd/klogd: done [2025-09-24 03:46:59.176] DML Start [2025-09-24 03:46:59.336] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:46:59.607] DML res1: 0 [2025-09-24 03:47:00.007] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:47:00.023] Read Success [2025-09-24 03:47:00.023] Verifying certificate... [2025-09-24 03:47:00.295] Verified OK [2025-09-24 03:47:00.311] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:47:01.958] Verified OK [2025-09-24 03:47:01.958] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:47:02.579] Verified OK [2025-09-24 03:47:02.579] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:47:05.090] fs.protected_hardlinks = 1 [2025-09-24 03:47:05.090] fs.protected_symlinks = 1 [2025-09-24 03:47:05.106] kernel.modules_disabled = 1 [2025-09-24 03:47:05.297] [2025-09-24 03:47:05.297] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:47:06.625] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:47:14.434] SBL1:1210.0.1.0 [2025-09-24 03:47:14.482] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:47:16.048] SBL2:1210.0.1.0 [2025-09-24 03:47:16.080] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:47:16.192] j-A [2025-09-24 03:47:23.546] The R5 Autosar Classic is running [2025-09-24 03:47:23.546] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:47:23.567] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:47:24.175] INIT: version 2.96 booting [2025-09-24 03:47:24.286] INIT: Entering runlevel: 5 [2025-09-24 03:47:24.446] mtd28 attached [2025-09-24 03:47:24.462] mtd32 attached [2025-09-24 03:47:24.462] mtd24 attached [2025-09-24 03:47:24.478] ubi0:animations is mounted. [2025-09-24 03:47:24.510] RTNETLINK answers: File exists [2025-09-24 03:47:24.578] ubi1:dml_code is mounted. [2025-09-24 03:47:24.578] ubi2:textures is mounted. [2025-09-24 03:47:24.578] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:47:24.578] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:47:24.578] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:47:24.578] data.LB_FadeInType0=100 [2025-09-24 03:47:24.578] data.CHLH_FadeInType0=0 [2025-09-24 03:47:24.578] data.WU_FadeInDelay=0 [2025-09-24 03:47:24.578] max_time_out=0 [2025-09-24 03:47:24.578] No splash screen [2025-09-24 03:47:24.578] stop dss Done [2025-09-24 03:47:24.578] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:47:24.578] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:47:24.626] /dev/mem opened. [2025-09-24 03:47:24.626] Memory mapped at address 0xffffa4623000. [2025-09-24 03:47:24.661] Read at address 0x00600018 (0xffffa4623018): 0x00000000 [2025-09-24 03:47:24.661] Write at address 0x00600018 (0xffffa4623018): 0x00400040, readback 0x00400040 [2025-09-24 03:47:24.661] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:47:24.661] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:47:24.836] Loaded PowerVR consumer services. [2025-09-24 03:47:24.900] 512+0 records in [2025-09-24 03:47:24.900] 512+0 records out [2025-09-24 03:47:24.916] Waiting data available... [2025-09-24 03:47:24.948] Starting syslogd/klogd: done [2025-09-24 03:47:24.981] DML Start [2025-09-24 03:47:25.156] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:47:25.364] DML res1: 0 [2025-09-24 03:47:25.796] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:47:25.817] Read Success [2025-09-24 03:47:25.817] Verifying certificate... [2025-09-24 03:47:26.057] Verified OK [2025-09-24 03:47:26.073] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:47:27.745] Verified OK [2025-09-24 03:47:27.745] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:47:28.374] Verified OK [2025-09-24 03:47:28.374] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:47:31.045] fs.protected_hardlinks = 1 [2025-09-24 03:47:31.045] fs.protected_symlinks = 1 [2025-09-24 03:47:31.061] kernel.modules_disabled = 1 [2025-09-24 03:47:31.253] [2025-09-24 03:47:31.253] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:47:32.481] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:47:40.222] SBL1:1210.0.1.0 [2025-09-24 03:47:40.270] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:47:41.836] SBL2:1210.0.1.0 [2025-09-24 03:47:41.884] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:47:41.980] j-A [2025-09-24 03:47:49.335] The R5 Autosar Classic is running [2025-09-24 03:47:49.358] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:47:49.358] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:47:49.965] INIT: version 2.96 booting [2025-09-24 03:47:50.076] INIT: Entering runlevel: 5 [2025-09-24 03:47:50.237] mtd24 attached [2025-09-24 03:47:50.237] mtd28 attached [2025-09-24 03:47:50.269] mtd32 attached [2025-09-24 03:47:50.300] ubi0:textures is mounted. [2025-09-24 03:47:50.368] RTNETLINK answers: File exists [2025-09-24 03:47:50.368] ubi1:animations is mounted. [2025-09-24 03:47:50.368] ubi2:dml_code is mounted. [2025-09-24 03:47:50.368] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:47:50.368] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:47:50.368] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:47:50.368] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:47:50.368] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:47:50.368] data.LB_FadeInType0=100 [2025-09-24 03:47:50.368] data.CHLH_FadeInType0=0 [2025-09-24 03:47:50.368] data.WU_FadeInDelay=0 [2025-09-24 03:47:50.368] max_time_out=0 [2025-09-24 03:47:50.368] No splash screen [2025-09-24 03:47:50.368] stop dss Done [2025-09-24 03:47:50.442] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:47:50.442] /dev/mem opened. [2025-09-24 03:47:50.442] Memory mapped at address 0xffff9ad70000. [2025-09-24 03:47:50.442] Read at address 0x00600018 (0xffff9ad70018): 0x00000000 [2025-09-24 03:47:50.442] Write at address 0x00600018 (0xffff9ad70018): 0x00400040, readback 0x00400040 [2025-09-24 03:47:50.442] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:47:50.634] Loaded PowerVR consumer services. [2025-09-24 03:47:50.681] 512+0 records in [2025-09-24 03:47:50.681] 512+0 records out [2025-09-24 03:47:50.713] Waiting data available... [2025-09-24 03:47:50.729] Starting syslogd/klogd: done [2025-09-24 03:47:50.745] DML Start [2025-09-24 03:47:50.937] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:47:51.145] DML res1: 0 [2025-09-24 03:47:51.574] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:47:51.574] Read Success [2025-09-24 03:47:51.574] Verifying certificate... [2025-09-24 03:47:51.798] Verified OK [2025-09-24 03:47:51.814] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:47:53.343] Verified OK [2025-09-24 03:47:53.343] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:47:53.887] Verified OK [2025-09-24 03:47:53.887] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:47:56.765] fs.protected_hardlinks = 1 [2025-09-24 03:47:56.781] fs.protected_symlinks = 1 [2025-09-24 03:47:56.781] kernel.modules_disabled = 1 [2025-09-24 03:47:56.989] [2025-09-24 03:47:56.989] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:47:58.279] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:48:06.032] SBL1:1210.0.1.0 [2025-09-24 03:48:06.080] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:48:07.648] SBL2:1210.0.1.0 [2025-09-24 03:48:07.696] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:48:07.791] j-A [2025-09-24 03:48:15.146] The R5 Autosar Classic is running [2025-09-24 03:48:15.171] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:48:15.171] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:48:15.779] INIT: version 2.96 booting [2025-09-24 03:48:15.891] INIT: Entering runlevel: 5 [2025-09-24 03:48:16.051] mtd28 attached [2025-09-24 03:48:16.051] mtd24 attached [2025-09-24 03:48:16.067] mtd32 attached [2025-09-24 03:48:16.176] ubi0:animations is mounted. [2025-09-24 03:48:16.176] ubi1:textures is mounted. [2025-09-24 03:48:16.176] RTNETLINK answers: File exists [2025-09-24 03:48:16.176] ubi2:dml_code is mounted. [2025-09-24 03:48:16.176] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:48:16.176] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:48:16.176] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:48:16.176] data.LB_FadeInType0=100 [2025-09-24 03:48:16.176] data.CHLH_FadeInType0=0 [2025-09-24 03:48:16.176] data.WU_FadeInDelay=0 [2025-09-24 03:48:16.176] max_time_out=0 [2025-09-24 03:48:16.176] No splash screen [2025-09-24 03:48:16.176] stop dss Done [2025-09-24 03:48:16.176] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:48:16.176] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:48:16.244] /dev/mem opened. [2025-09-24 03:48:16.244] Memory mapped at address 0xffff96c5f000. [2025-09-24 03:48:16.244] Read at address 0x00600018 (0xffff96c5f018): 0x00000000 [2025-09-24 03:48:16.244] Write at address 0x00600018 (0xffff96c5f018): 0x00400040, readback 0x00400040 [2025-09-24 03:48:16.285] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:48:16.285] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:48:16.364] Loaded PowerVR consumer services. [2025-09-24 03:48:16.513] 512+0 records in [2025-09-24 03:48:16.513] 512+0 records out [2025-09-24 03:48:16.513] Waiting data available... [2025-09-24 03:48:16.546] Starting syslogd/klogd: done [2025-09-24 03:48:16.562] DML Start [2025-09-24 03:48:16.721] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:48:16.961] DML res1: 0 [2025-09-24 03:48:17.419] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:48:17.419] Read Success [2025-09-24 03:48:17.419] Verifying certificate... [2025-09-24 03:48:17.659] Verified OK [2025-09-24 03:48:17.675] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:48:19.354] Verified OK [2025-09-24 03:48:19.376] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:48:19.997] Verified OK [2025-09-24 03:48:19.997] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:48:22.571] fs.protected_hardlinks = 1 [2025-09-24 03:48:22.571] fs.protected_symlinks = 1 [2025-09-24 03:48:22.587] kernel.modules_disabled = 1 [2025-09-24 03:48:22.778] [2025-09-24 03:48:22.778] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:48:24.048] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:48:31.859] SBL1:1210.0.1.0 [2025-09-24 03:48:31.891] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:48:33.474] SBL2:1210.0.1.0 [2025-09-24 03:48:33.506] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:48:33.617] j-A [2025-09-24 03:48:40.988] The R5 Autosar Classic is running [2025-09-24 03:48:40.988] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:48:40.988] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:48:41.596] INIT: version 2.96 booting [2025-09-24 03:48:41.708] INIT: Entering runlevel: 5 [2025-09-24 03:48:41.868] mtd32 attached [2025-09-24 03:48:41.884] mtd28 attached [2025-09-24 03:48:41.884] mtd24 attached [2025-09-24 03:48:41.932] ubi0:dml_code is mounted. [2025-09-24 03:48:41.932] RTNETLINK answers: File exists [2025-09-24 03:48:41.972] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:48:41.972] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:48:41.972] ubi1:animations is mounted. [2025-09-24 03:48:41.972] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:48:41.972] ubi2:textures is mounted. [2025-09-24 03:48:41.973] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:48:41.973] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:48:41.995] data.LB_FadeInType0=100 [2025-09-24 03:48:41.995] data.CHLH_FadeInType0=0 [2025-09-24 03:48:41.995] data.WU_FadeInDelay=0 [2025-09-24 03:48:41.995] max_time_out=0 [2025-09-24 03:48:41.995] No splash screen [2025-09-24 03:48:41.995] stop dss Done [2025-09-24 03:48:42.026] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:48:42.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:48:42.080] /dev/mem opened. [2025-09-24 03:48:42.080] Memory mapped at address 0xffffaf9d8000. [2025-09-24 03:48:42.080] Read at address 0x00600018 (0xffffaf9d8018): 0x00000000 [2025-09-24 03:48:42.080] Write at address 0x00600018 (0xffffaf9d8018): 0x00400040, readback 0x00400040 [2025-09-24 03:48:42.160] Loaded PowerVR consumer services. [2025-09-24 03:48:42.319] 512+0 records in [2025-09-24 03:48:42.319] 512+0 records out [2025-09-24 03:48:42.319] Waiting data available... [2025-09-24 03:48:42.351] Starting syslogd/klogd: done [2025-09-24 03:48:42.367] DML Start [2025-09-24 03:48:42.543] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:48:42.767] DML res1: 0 [2025-09-24 03:48:43.214] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:48:43.236] Read Success [2025-09-24 03:48:43.236] Verifying certificate... [2025-09-24 03:48:43.476] Verified OK [2025-09-24 03:48:43.492] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:48:45.144] Verified OK [2025-09-24 03:48:45.144] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:48:45.777] Verified OK [2025-09-24 03:48:45.777] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:48:48.431] fs.protected_hardlinks = 1 [2025-09-24 03:48:48.447] fs.protected_symlinks = 1 [2025-09-24 03:48:48.447] kernel.modules_disabled = 1 [2025-09-24 03:48:48.638] [2025-09-24 03:48:48.638] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:48:49.885] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:48:57.667] SBL1:1210.0.1.0 [2025-09-24 03:48:57.699] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:48:59.281] SBL2:1210.0.1.0 [2025-09-24 03:48:59.313] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:48:59.425] j-A [2025-09-24 03:49:06.765] The R5 Autosar Classic is running [2025-09-24 03:49:06.796] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:49:06.796] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:49:07.403] INIT: version 2.96 booting [2025-09-24 03:49:07.516] INIT: Entering runlevel: 5 [2025-09-24 03:49:07.659] mtd24 attached [2025-09-24 03:49:07.675] mtd28 attached [2025-09-24 03:49:07.707] mtd32 attached [2025-09-24 03:49:07.723] ubi1:animations is mounted. [2025-09-24 03:49:07.723] ubi0:textures is mounted. [2025-09-24 03:49:07.739] RTNETLINK answers: File exists [2025-09-24 03:49:07.772] ubi2:dml_code is mounted. [2025-09-24 03:49:07.772] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:49:07.772] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:49:07.772] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:49:07.772] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:49:07.806] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:49:07.806] data.LB_FadeInType0=100 [2025-09-24 03:49:07.806] data.CHLH_FadeInType0=0 [2025-09-24 03:49:07.806] data.WU_FadeInDelay=0 [2025-09-24 03:49:07.806] max_time_out=0 [2025-09-24 03:49:07.806] No splash screen [2025-09-24 03:49:07.806] stop dss Done [2025-09-24 03:49:07.906] /dev/mem opened. [2025-09-24 03:49:07.906] Memory mapped at address 0xffffaca28000. [2025-09-24 03:49:07.906] Read at address 0x00600018 (0xffffaca28018): 0x00000000 [2025-09-24 03:49:07.906] Write at address 0x00600018 (0xffffaca28018): 0x00400040, readback 0x00400040 [2025-09-24 03:49:07.906] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:49:07.906] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:49:08.001] Loaded PowerVR consumer services. [2025-09-24 03:49:08.140] 512+0 records in [2025-09-24 03:49:08.140] 512+0 records out [2025-09-24 03:49:08.140] Waiting data available... [2025-09-24 03:49:08.156] Starting syslogd/klogd: done [2025-09-24 03:49:08.188] DML Start [2025-09-24 03:49:08.396] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:49:08.635] DML res1: 0 [2025-09-24 03:49:09.026] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:49:09.026] Read Success [2025-09-24 03:49:09.026] Verifying certificate... [2025-09-24 03:49:09.265] Verified OK [2025-09-24 03:49:09.281] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:49:10.955] Verified OK [2025-09-24 03:49:10.955] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:49:11.552] Verified OK [2025-09-24 03:49:11.552] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:49:14.110] fs.protected_hardlinks = 1 [2025-09-24 03:49:14.110] fs.protected_symlinks = 1 [2025-09-24 03:49:14.126] kernel.modules_disabled = 1 [2025-09-24 03:49:14.302] [2025-09-24 03:49:14.302] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:49:15.693] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:49:23.479] SBL1:1210.0.1.0 [2025-09-24 03:49:23.511] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:49:25.094] SBL2:1210.0.1.0 [2025-09-24 03:49:25.126] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:49:25.238] j-A [2025-09-24 03:49:32.611] The R5 Autosar Classic is running [2025-09-24 03:49:32.611] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:49:32.611] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:49:33.219] INIT: version 2.96 booting [2025-09-24 03:49:33.330] INIT: Entering runlevel: 5 [2025-09-24 03:49:33.490] mtd32 attached [2025-09-24 03:49:33.490] mtd24 attached [2025-09-24 03:49:33.506] mtd28 attached [2025-09-24 03:49:33.538] ubi0:dml_code is mounted. [2025-09-24 03:49:33.554] RTNETLINK answers: File exists [2025-09-24 03:49:33.554] ubi1:textures is mounted. [2025-09-24 03:49:33.619] ubi2:animations is mounted. [2025-09-24 03:49:33.619] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:49:33.619] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:49:33.619] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:49:33.619] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:49:33.619] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:49:33.619] data.LB_FadeInType0=100 [2025-09-24 03:49:33.619] data.CHLH_FadeInType0=0 [2025-09-24 03:49:33.619] data.WU_FadeInDelay=0 [2025-09-24 03:49:33.619] max_time_out=0 [2025-09-24 03:49:33.619] No splash screen [2025-09-24 03:49:33.619] stop dss Done [2025-09-24 03:49:33.651] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:49:33.667] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:49:33.667] /dev/mem opened. [2025-09-24 03:49:33.699] Memory mapped at address 0xffffb3055000. [2025-09-24 03:49:33.699] Read at address 0x00600018 (0xffffb3055018): 0x00000000 [2025-09-24 03:49:33.699] Write at address 0x00600018 (0xffffb3055018): 0x00400040, readback 0x00400040 [2025-09-24 03:49:33.906] Loaded PowerVR consumer services. [2025-09-24 03:49:33.938] Waiting data available... [2025-09-24 03:49:33.938] 512+0 records in [2025-09-24 03:49:33.938] 512+0 records out [2025-09-24 03:49:33.970] Starting syslogd/klogd: done [2025-09-24 03:49:33.986] DML Start [2025-09-24 03:49:34.178] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:49:34.371] DML res1: 0 [2025-09-24 03:49:34.802] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:49:34.823] Read Success [2025-09-24 03:49:34.823] Verifying certificate... [2025-09-24 03:49:35.047] Verified OK [2025-09-24 03:49:35.063] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:49:36.832] Verified OK [2025-09-24 03:49:36.832] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:49:37.422] Verified OK [2025-09-24 03:49:37.422] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:49:39.948] fs.protected_hardlinks = 1 [2025-09-24 03:49:39.964] fs.protected_symlinks = 1 [2025-09-24 03:49:39.964] kernel.modules_disabled = 1 [2025-09-24 03:49:40.156] [2025-09-24 03:49:40.156] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:49:41.467] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:49:49.268] SBL1:1210.0.1.0 [2025-09-24 03:49:49.316] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:49:50.899] SBL2:1210.0.1.0 [2025-09-24 03:49:50.931] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:49:51.043] j-A [2025-09-24 03:49:58.382] The R5 Autosar Classic is running [2025-09-24 03:49:58.408] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:49:58.408] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:49:59.015] INIT: version 2.96 booting [2025-09-24 03:49:59.128] INIT: Entering runlevel: 5 [2025-09-24 03:49:59.287] mtd24 attached [2025-09-24 03:49:59.287] mtd32 attached [2025-09-24 03:49:59.303] mtd28 attached [2025-09-24 03:49:59.319] ubi0:textures is mounted. [2025-09-24 03:49:59.352] RTNETLINK answers: File exists [2025-09-24 03:49:59.388] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:49:59.388] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:49:59.388] ubi1:dml_code is mounted. [2025-09-24 03:49:59.388] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:49:59.388] ubi2:animations is mounted. [2025-09-24 03:49:59.388] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:49:59.388] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:49:59.413] data.LB_FadeInType0=100 [2025-09-24 03:49:59.413] data.CHLH_FadeInType0=0 [2025-09-24 03:49:59.413] data.WU_FadeInDelay=0 [2025-09-24 03:49:59.413] max_time_out=0 [2025-09-24 03:49:59.413] No splash screen [2025-09-24 03:49:59.413] stop dss Done [2025-09-24 03:49:59.429] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:49:59.429] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:49:59.495] /dev/mem opened. [2025-09-24 03:49:59.495] Memory mapped at address 0xffffb6806000. [2025-09-24 03:49:59.495] Read at address 0x00600018 (0xffffb6806018): 0x00000000 [2025-09-24 03:49:59.495] Write at address 0x00600018 (0xffffb6806018): 0x00400040, readback 0x00400040 [2025-09-24 03:49:59.704] Loaded PowerVR consumer services. [2025-09-24 03:49:59.720] Waiting data available... [2025-09-24 03:49:59.736] 512+0 records in [2025-09-24 03:49:59.736] 512+0 records out [2025-09-24 03:49:59.751] Starting syslogd/klogd: done [2025-09-24 03:49:59.767] DML Start [2025-09-24 03:49:59.927] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:50:00.151] DML res1: 0 [2025-09-24 03:50:00.614] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:50:00.614] Read Success [2025-09-24 03:50:00.614] Verifying certificate... [2025-09-24 03:50:00.837] Verified OK [2025-09-24 03:50:00.853] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:50:02.527] Verified OK [2025-09-24 03:50:02.527] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:50:03.134] Verified OK [2025-09-24 03:50:03.156] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:50:05.810] fs.protected_hardlinks = 1 [2025-09-24 03:50:05.826] fs.protected_symlinks = 1 [2025-09-24 03:50:05.826] kernel.modules_disabled = 1 [2025-09-24 03:50:06.017] [2025-09-24 03:50:06.017] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:50:07.251] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:50:15.074] SBL1:1210.0.1.0 [2025-09-24 03:50:15.122] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:50:16.688] SBL2:1210.0.1.0 [2025-09-24 03:50:16.721] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:50:16.833] j-A [2025-09-24 03:50:24.208] The R5 Autosar Classic is running [2025-09-24 03:50:24.208] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:50:24.208] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:50:24.815] INIT: version 2.96 booting [2025-09-24 03:50:24.912] INIT: Entering runlevel: 5 [2025-09-24 03:50:25.071] mtd28 attached [2025-09-24 03:50:25.087] mtd24 attached [2025-09-24 03:50:25.087] mtd32 attached [2025-09-24 03:50:25.135] RTNETLINK answers: File exists [2025-09-24 03:50:25.181] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:50:25.181] ubi1:textures is mounted. [2025-09-24 03:50:25.181] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:50:25.181] ubi0:animations is mounted. [2025-09-24 03:50:25.181] ubi2:dml_code is mounted. [2025-09-24 03:50:25.181] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:50:25.181] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:50:25.181] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:50:25.207] data.LB_FadeInType0=100 [2025-09-24 03:50:25.207] data.CHLH_FadeInType0=0 [2025-09-24 03:50:25.207] data.WU_FadeInDelay=0 [2025-09-24 03:50:25.207] max_time_out=0 [2025-09-24 03:50:25.207] No splash screen [2025-09-24 03:50:25.207] stop dss Done [2025-09-24 03:50:25.236] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:50:25.236] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:50:25.252] /dev/mem opened. [2025-09-24 03:50:25.252] Memory mapped at address 0xffffb4fc3000. [2025-09-24 03:50:25.279] Read at address 0x00600018 (0xffffb4fc3018): 0x00000000 [2025-09-24 03:50:25.279] Write at address 0x00600018 (0xffffb4fc3018): 0x00400040, readback 0x00400040 [2025-09-24 03:50:25.470] Loaded PowerVR consumer services. [2025-09-24 03:50:25.544] Waiting data available... [2025-09-24 03:50:25.544] 512+0 records in [2025-09-24 03:50:25.544] 512+0 records out [2025-09-24 03:50:25.592] Starting syslogd/klogd: done [2025-09-24 03:50:25.608] DML Start [2025-09-24 03:50:25.768] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:50:25.992] DML res1: 0 [2025-09-24 03:50:26.440] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:50:26.456] Read Success [2025-09-24 03:50:26.456] Verifying certificate... [2025-09-24 03:50:26.759] Verified OK [2025-09-24 03:50:26.775] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:50:28.529] Verified OK [2025-09-24 03:50:28.529] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:50:29.120] Verified OK [2025-09-24 03:50:29.120] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:50:31.631] fs.protected_hardlinks = 1 [2025-09-24 03:50:31.648] fs.protected_symlinks = 1 [2025-09-24 03:50:31.648] kernel.modules_disabled = 1 [2025-09-24 03:50:31.839] [2025-09-24 03:50:31.839] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:50:33.083] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:50:40.866] SBL1:1210.0.1.0 [2025-09-24 03:50:40.914] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:50:42.480] SBL2:1210.0.1.0 [2025-09-24 03:50:42.512] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:50:42.625] j-A [2025-09-24 03:50:50.000] The R5 Autosar Classic is running [2025-09-24 03:50:50.000] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:50:50.000] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:50:50.607] INIT: version 2.96 booting [2025-09-24 03:50:50.719] INIT: Entering runlevel: 5 [2025-09-24 03:50:50.863] mtd24 attached [2025-09-24 03:50:50.879] mtd28 attached [2025-09-24 03:50:50.895] mtd32 attached [2025-09-24 03:50:51.001] ubi0:textures is mounted. [2025-09-24 03:50:51.001] RTNETLINK answers: File exists [2025-09-24 03:50:51.001] ubi1:animations is mounted. [2025-09-24 03:50:51.001] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:50:51.001] ubi2:dml_code is mounted. [2025-09-24 03:50:51.001] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:50:51.001] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:50:51.001] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:50:51.001] data.LB_FadeInType0=100 [2025-09-24 03:50:51.001] data.CHLH_FadeInType0=0 [2025-09-24 03:50:51.001] data.WU_FadeInDelay=0 [2025-09-24 03:50:51.001] max_time_out=0 [2025-09-24 03:50:51.001] No splash screen [2025-09-24 03:50:51.001] stop dss Done [2025-09-24 03:50:51.001] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:50:51.048] /dev/mem opened. [2025-09-24 03:50:51.048] Memory mapped at address 0xffff8dbec000. [2025-09-24 03:50:51.086] Read at address 0x00600018 (0xffff8dbec018): 0x00000000 [2025-09-24 03:50:51.086] Write at address 0x00600018 (0xffff8dbec018): 0x00400040, readback 0x00400040 [2025-09-24 03:50:51.086] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:50:51.102] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:50:51.294] Loaded PowerVR consumer services. [2025-09-24 03:50:51.350] Waiting data available... [2025-09-24 03:50:51.350] 512+0 records in [2025-09-24 03:50:51.350] 512+0 records out [2025-09-24 03:50:51.382] Starting syslogd/klogd: done [2025-09-24 03:50:51.398] DML Start [2025-09-24 03:50:51.574] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:50:51.781] DML res1: 0 [2025-09-24 03:50:52.262] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:50:52.278] Read Success [2025-09-24 03:50:52.278] Verifying certificate... [2025-09-24 03:50:52.501] Verified OK [2025-09-24 03:50:52.517] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:50:54.242] Verified OK [2025-09-24 03:50:54.242] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:50:54.864] Verified OK [2025-09-24 03:50:54.864] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:50:57.407] fs.protected_hardlinks = 1 [2025-09-24 03:50:57.435] fs.protected_symlinks = 1 [2025-09-24 03:50:57.435] kernel.modules_disabled = 1 [2025-09-24 03:50:57.612] [2025-09-24 03:50:57.612] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:50:58.940] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:51:06.659] SBL1:1210.0.1.0 [2025-09-24 03:51:06.707] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:51:08.273] SBL2:1210.0.1.0 [2025-09-24 03:51:08.321] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:51:08.417] j-A [2025-09-24 03:51:15.772] The R5 Autosar Classic is running [2025-09-24 03:51:15.795] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:51:15.795] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:51:16.402] INIT: version 2.96 booting [2025-09-24 03:51:16.514] INIT: Entering runlevel: 5 [2025-09-24 03:51:16.674] mtd24 attached [2025-09-24 03:51:16.674] mtd32 attached [2025-09-24 03:51:16.690] mtd28 attached [2025-09-24 03:51:16.738] ubi0:textures is mounted. [2025-09-24 03:51:16.807] ubi2:animations is mounted. [2025-09-24 03:51:16.807] RTNETLINK answers: File exists [2025-09-24 03:51:16.807] ubi1:dml_code is mounted. [2025-09-24 03:51:16.807] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:51:16.807] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:51:16.807] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:51:16.807] data.LB_FadeInType0=100 [2025-09-24 03:51:16.807] data.CHLH_FadeInType0=0 [2025-09-24 03:51:16.807] data.WU_FadeInDelay=0 [2025-09-24 03:51:16.807] max_time_out=0 [2025-09-24 03:51:16.807] No splash screen [2025-09-24 03:51:16.807] stop dss Done [2025-09-24 03:51:16.807] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:51:16.807] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:51:16.858] /dev/mem opened. [2025-09-24 03:51:16.858] Memory mapped at address 0xffff95361000. [2025-09-24 03:51:16.858] Read at address 0x00600018 (0xffff95361018): 0x00000000 [2025-09-24 03:51:16.858] Write at address 0x00600018 (0xffff95361018): 0x00400040, readback 0x00400040 [2025-09-24 03:51:16.883] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:51:16.883] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:51:17.123] Loaded PowerVR consumer services. [2025-09-24 03:51:17.139] Waiting data available... [2025-09-24 03:51:17.171] 512+0 records in [2025-09-24 03:51:17.171] 512+0 records out [2025-09-24 03:51:17.203] Starting syslogd/klogd: done [2025-09-24 03:51:17.219] DML Start [2025-09-24 03:51:17.379] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:51:17.586] DML res1: 0 [2025-09-24 03:51:18.089] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:51:18.089] Read Success [2025-09-24 03:51:18.089] Verifying certificate... [2025-09-24 03:51:18.313] Verified OK [2025-09-24 03:51:18.329] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:51:20.089] Verified OK [2025-09-24 03:51:20.089] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:51:20.648] Verified OK [2025-09-24 03:51:20.669] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:51:23.146] fs.protected_hardlinks = 1 [2025-09-24 03:51:23.146] fs.protected_symlinks = 1 [2025-09-24 03:51:23.146] kernel.modules_disabled = 1 [2025-09-24 03:51:23.322] [2025-09-24 03:51:23.322] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:51:24.714] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:51:32.442] SBL1:1210.0.1.0 [2025-09-24 03:51:32.490] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:51:34.057] SBL2:1210.0.1.0 [2025-09-24 03:51:34.104] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:51:34.200] j-A [2025-09-24 03:51:41.554] The R5 Autosar Classic is running [2025-09-24 03:51:41.579] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:51:41.579] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:51:42.187] INIT: version 2.96 booting [2025-09-24 03:51:42.299] INIT: Entering runlevel: 5 [2025-09-24 03:51:42.459] mtd24 attached [2025-09-24 03:51:42.459] mtd32 attached [2025-09-24 03:51:42.475] mtd28 attached [2025-09-24 03:51:42.523] ubi0:textures is mounted. [2025-09-24 03:51:42.523] RTNETLINK answers: File exists [2025-09-24 03:51:42.576] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:51:42.576] ubi1:dml_code is mounted. [2025-09-24 03:51:42.576] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:51:42.576] ubi2:animations is mounted. [2025-09-24 03:51:42.576] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:51:42.576] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:51:42.576] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:51:42.576] data.LB_FadeInType0=100 [2025-09-24 03:51:42.576] data.CHLH_FadeInType0=0 [2025-09-24 03:51:42.576] data.WU_FadeInDelay=0 [2025-09-24 03:51:42.576] max_time_out=0 [2025-09-24 03:51:42.576] No splash screen [2025-09-24 03:51:42.576] stop dss Done [2025-09-24 03:51:42.623] /dev/mem opened. [2025-09-24 03:51:42.623] Memory mapped at address 0xffff81e21000. [2025-09-24 03:51:42.649] Read at address 0x00600018 (0xffff81e21018): 0x00000000 [2025-09-24 03:51:42.649] Write at address 0x00600018 (0xffff81e21018): 0x00400040, readback 0x00400040 [2025-09-24 03:51:42.666] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:51:42.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:51:42.889] Loaded PowerVR consumer services. [2025-09-24 03:51:42.932] 512+0 records in [2025-09-24 03:51:42.932] 512+0 records out [2025-09-24 03:51:42.932] Waiting data available... [2025-09-24 03:51:42.964] Starting syslogd/klogd: done [2025-09-24 03:51:42.980] DML Start [2025-09-24 03:51:43.125] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:51:43.332] DML res1: 0 [2025-09-24 03:51:43.844] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:51:43.844] Read Success [2025-09-24 03:51:43.860] Verifying certificate... [2025-09-24 03:51:44.116] Verified OK [2025-09-24 03:51:44.132] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:51:45.759] Verified OK [2025-09-24 03:51:45.759] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:51:46.407] Verified OK [2025-09-24 03:51:46.407] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:51:48.982] fs.protected_hardlinks = 1 [2025-09-24 03:51:48.982] fs.protected_symlinks = 1 [2025-09-24 03:51:48.998] kernel.modules_disabled = 1 [2025-09-24 03:51:49.174] [2025-09-24 03:51:49.174] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:51:50.432] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:51:58.262] SBL1:1210.0.1.0 [2025-09-24 03:51:58.294] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:51:59.877] SBL2:1210.0.1.0 [2025-09-24 03:51:59.909] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:52:00.021] j-A [2025-09-24 03:52:07.389] The R5 Autosar Classic is running [2025-09-24 03:52:07.389] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:52:07.389] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:52:07.997] INIT: version 2.96 booting [2025-09-24 03:52:08.109] INIT: Entering runlevel: 5 [2025-09-24 03:52:08.269] mtd24 attached [2025-09-24 03:52:08.285] mtd32 attached [2025-09-24 03:52:08.301] mtd28 attached [2025-09-24 03:52:08.333] ubi0:textures is mounted. [2025-09-24 03:52:08.349] RTNETLINK answers: File exists [2025-09-24 03:52:08.349] ubi2:animations is mounted. [2025-09-24 03:52:08.374] ubi1:dml_code is mounted. [2025-09-24 03:52:08.374] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:52:08.374] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:52:08.408] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:52:08.408] data.LB_FadeInType0=100 [2025-09-24 03:52:08.408] data.CHLH_FadeInType0=0 [2025-09-24 03:52:08.408] data.WU_FadeInDelay=0 [2025-09-24 03:52:08.408] max_time_out=0 [2025-09-24 03:52:08.408] No splash screen [2025-09-24 03:52:08.408] stop dss Done [2025-09-24 03:52:08.408] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:52:08.408] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:52:08.456] /dev/mem opened. [2025-09-24 03:52:08.456] Memory mapped at address 0xffff96d31000. [2025-09-24 03:52:08.482] Read at address 0x00600018 (0xffff96d31018): 0x00000000 [2025-09-24 03:52:08.482] Write at address 0x00600018 (0xffff96d31018): 0x00400040, readback 0x00400040 [2025-09-24 03:52:08.498] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:52:08.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:52:08.690] Loaded PowerVR consumer services. [2025-09-24 03:52:08.721] 512+0 records in [2025-09-24 03:52:08.737] 512+0 records out [2025-09-24 03:52:08.753] Waiting data available... [2025-09-24 03:52:08.785] Starting syslogd/klogd: done [2025-09-24 03:52:08.802] DML Start [2025-09-24 03:52:08.993] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:52:09.217] DML res1: 0 [2025-09-24 03:52:09.609] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:52:09.609] Read Success [2025-09-24 03:52:09.609] Verifying certificate... [2025-09-24 03:52:09.897] Verified OK [2025-09-24 03:52:09.913] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:52:11.630] Verified OK [2025-09-24 03:52:11.630] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:52:12.278] Verified OK [2025-09-24 03:52:12.278] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:52:14.900] fs.protected_hardlinks = 1 [2025-09-24 03:52:14.916] fs.protected_symlinks = 1 [2025-09-24 03:52:14.916] kernel.modules_disabled = 1 [2025-09-24 03:52:15.124] [2025-09-24 03:52:15.124] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:52:16.299] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:52:24.040] SBL1:1210.0.1.0 [2025-09-24 03:52:24.071] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:52:25.654] SBL2:1210.0.1.0 [2025-09-24 03:52:25.686] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:52:25.798] j-A [2025-09-24 03:52:33.170] The R5 Autosar Classic is running [2025-09-24 03:52:33.170] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:52:33.170] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:52:33.777] INIT: version 2.96 booting [2025-09-24 03:52:33.888] INIT: Entering runlevel: 5 [2025-09-24 03:52:34.033] mtd24 attached [2025-09-24 03:52:34.049] mtd28 attached [2025-09-24 03:52:34.065] mtd32 attached [2025-09-24 03:52:34.112] ubi0:textures is mounted. [2025-09-24 03:52:34.112] RTNETLINK answers: File exists [2025-09-24 03:52:34.165] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:52:34.165] ubi2:dml_code is mounted. [2025-09-24 03:52:34.165] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:52:34.165] ubi1:animations is mounted. [2025-09-24 03:52:34.165] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:52:34.165] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:52:34.165] data.LB_FadeInType0=100 [2025-09-24 03:52:34.165] data.CHLH_FadeInType0=0 [2025-09-24 03:52:34.165] data.WU_FadeInDelay=0 [2025-09-24 03:52:34.165] max_time_out=0 [2025-09-24 03:52:34.165] No splash screen [2025-09-24 03:52:34.165] stop dss Done [2025-09-24 03:52:34.165] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:52:34.213] /dev/mem opened. [2025-09-24 03:52:34.213] Memory mapped at address 0xffffb06b9000. [2025-09-24 03:52:34.257] Read at address 0x00600018 (0xffffb06b9018): 0x00000000 [2025-09-24 03:52:34.257] Write at address 0x00600018 (0xffffb06b9018): 0x00400040, readback 0x00400040 [2025-09-24 03:52:34.257] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:52:34.257] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:52:34.449] Loaded PowerVR consumer services. [2025-09-24 03:52:34.497] Waiting data available... [2025-09-24 03:52:34.497] 512+0 records in [2025-09-24 03:52:34.497] 512+0 records out [2025-09-24 03:52:34.545] Starting syslogd/klogd: done [2025-09-24 03:52:34.561] DML Start [2025-09-24 03:52:34.737] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:52:34.961] DML res1: 0 [2025-09-24 03:52:35.425] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:52:35.446] Read Success [2025-09-24 03:52:35.446] Verifying certificate... [2025-09-24 03:52:35.717] Verified OK [2025-09-24 03:52:35.749] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:52:37.481] Verified OK [2025-09-24 03:52:37.481] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:52:38.055] Verified OK [2025-09-24 03:52:38.055] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:52:40.534] fs.protected_hardlinks = 1 [2025-09-24 03:52:40.565] fs.protected_symlinks = 1 [2025-09-24 03:52:40.565] kernel.modules_disabled = 1 [2025-09-24 03:52:40.740] [2025-09-24 03:52:40.740] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:52:42.064] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:52:49.825] SBL1:1210.0.1.0 [2025-09-24 03:52:49.857] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:52:51.441] SBL2:1210.0.1.0 [2025-09-24 03:52:51.473] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:52:51.585] j-A [2025-09-24 03:52:58.956] The R5 Autosar Classic is running [2025-09-24 03:52:58.956] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:52:58.956] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:52:59.564] INIT: version 2.96 booting [2025-09-24 03:52:59.676] INIT: Entering runlevel: 5 [2025-09-24 03:52:59.819] mtd24 attached [2025-09-24 03:52:59.835] mtd32 attached [2025-09-24 03:52:59.851] mtd28 attached [2025-09-24 03:52:59.867] ubi0:textures is mounted. [2025-09-24 03:52:59.899] ubi1:dml_code is mounted. [2025-09-24 03:52:59.899] RTNETLINK answers: File exists [2025-09-24 03:52:59.962] ubi2:animations is mounted. [2025-09-24 03:52:59.962] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:52:59.962] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:52:59.962] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:52:59.962] data.LB_FadeInType0=100 [2025-09-24 03:52:59.962] data.CHLH_FadeInType0=0 [2025-09-24 03:52:59.962] data.WU_FadeInDelay=0 [2025-09-24 03:52:59.962] max_time_out=0 [2025-09-24 03:52:59.962] No splash screen [2025-09-24 03:52:59.962] stop dss Done [2025-09-24 03:52:59.962] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:52:59.962] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:53:00.010] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:53:00.049] /dev/mem opened. [2025-09-24 03:53:00.049] Memory mapped at address 0xffff97d2d000. [2025-09-24 03:53:00.049] Read at address 0x00600018 (0xffff97d2d018): 0x00000000 [2025-09-24 03:53:00.049] Write at address 0x00600018 (0xffff97d2d018): 0x00400040, readback 0x00400040 [2025-09-24 03:53:00.049] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:53:00.130] Loaded PowerVR consumer services. [2025-09-24 03:53:00.286] 512+0 records in [2025-09-24 03:53:00.286] 512+0 records out [2025-09-24 03:53:00.286] Waiting data available... [2025-09-24 03:53:00.302] Starting syslogd/klogd: done [2025-09-24 03:53:00.318] DML Start [2025-09-24 03:53:00.526] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:53:00.766] DML res1: 0 [2025-09-24 03:53:01.129] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:53:01.129] Read Success [2025-09-24 03:53:01.129] Verifying certificate... [2025-09-24 03:53:01.400] Verified OK [2025-09-24 03:53:01.432] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:53:03.170] Verified OK [2025-09-24 03:53:03.170] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:53:03.757] Verified OK [2025-09-24 03:53:03.757] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:53:06.299] fs.protected_hardlinks = 1 [2025-09-24 03:53:06.315] fs.protected_symlinks = 1 [2025-09-24 03:53:06.315] kernel.modules_disabled = 1 [2025-09-24 03:53:06.523] [2025-09-24 03:53:06.523] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:53:07.847] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:53:15.624] SBL1:1210.0.1.0 [2025-09-24 03:53:15.672] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:53:17.239] SBL2:1210.0.1.0 [2025-09-24 03:53:17.287] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:53:17.383] j-A [2025-09-24 03:53:24.739] The R5 Autosar Classic is running [2025-09-24 03:53:24.739] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:53:24.760] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:53:25.367] INIT: version 2.96 booting [2025-09-24 03:53:25.480] INIT: Entering runlevel: 5 [2025-09-24 03:53:25.639] mtd32 attached [2025-09-24 03:53:25.639] mtd28 attached [2025-09-24 03:53:25.655] mtd24 attached [2025-09-24 03:53:25.703] RTNETLINK answers: File exists [2025-09-24 03:53:25.766] ubi0:dml_code is mounted. [2025-09-24 03:53:25.766] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:53:25.766] ubi2:textures is mounted. [2025-09-24 03:53:25.766] ubi1:animations is mounted. [2025-09-24 03:53:25.766] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:53:25.766] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:53:25.766] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:53:25.766] data.LB_FadeInType0=100 [2025-09-24 03:53:25.766] data.CHLH_FadeInType0=0 [2025-09-24 03:53:25.766] data.WU_FadeInDelay=0 [2025-09-24 03:53:25.766] max_time_out=0 [2025-09-24 03:53:25.766] No splash screen [2025-09-24 03:53:25.766] stop dss Done [2025-09-24 03:53:25.766] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:53:25.856] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:53:25.856] /dev/mem opened. [2025-09-24 03:53:25.856] Memory mapped at address 0xffff91067000. [2025-09-24 03:53:25.856] Read at address 0x00600018 (0xffff91067018): 0x00000000 [2025-09-24 03:53:25.856] Write at address 0x00600018 (0xffff91067018): 0x00400040, readback 0x00400040 [2025-09-24 03:53:25.856] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:53:25.936] Loaded PowerVR consumer services. [2025-09-24 03:53:26.108] Waiting data available... [2025-09-24 03:53:26.108] 512+0 records in [2025-09-24 03:53:26.108] 512+0 records out [2025-09-24 03:53:26.140] Starting syslogd/klogd: done [2025-09-24 03:53:26.156] DML Start [2025-09-24 03:53:26.300] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:53:26.524] DML res1: 0 [2025-09-24 03:53:26.986] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:53:26.986] Read Success [2025-09-24 03:53:26.986] Verifying certificate... [2025-09-24 03:53:27.227] Verified OK [2025-09-24 03:53:27.242] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:53:29.026] Verified OK [2025-09-24 03:53:29.026] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:53:29.634] Verified OK [2025-09-24 03:53:29.634] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:53:32.192] fs.protected_hardlinks = 1 [2025-09-24 03:53:32.208] fs.protected_symlinks = 1 [2025-09-24 03:53:32.208] kernel.modules_disabled = 1 [2025-09-24 03:53:32.415] [2025-09-24 03:53:32.415] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:53:33.646] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:53:41.433] SBL1:1210.0.1.0 [2025-09-24 03:53:41.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:53:43.047] SBL2:1210.0.1.0 [2025-09-24 03:53:43.095] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:53:43.191] j-A [2025-09-24 03:53:50.547] The R5 Autosar Classic is running [2025-09-24 03:53:50.548] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:53:50.568] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:53:51.176] INIT: version 2.96 booting [2025-09-24 03:53:51.288] INIT: Entering runlevel: 5 [2025-09-24 03:53:51.432] mtd24 attached [2025-09-24 03:53:51.448] mtd28 attached [2025-09-24 03:53:51.480] ubi0:textures is mounted. [2025-09-24 03:53:51.480] mtd32 attached [2025-09-24 03:53:51.512] ubi1:animations is mounted. [2025-09-24 03:53:51.573] RTNETLINK answers: File exists [2025-09-24 03:53:51.573] ubi2:dml_code is mounted. [2025-09-24 03:53:51.573] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:53:51.573] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:53:51.573] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:53:51.573] data.LB_FadeInType0=100 [2025-09-24 03:53:51.573] data.CHLH_FadeInType0=0 [2025-09-24 03:53:51.573] data.WU_FadeInDelay=0 [2025-09-24 03:53:51.573] max_time_out=0 [2025-09-24 03:53:51.573] No splash screen [2025-09-24 03:53:51.573] stop dss Done [2025-09-24 03:53:51.573] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:53:51.573] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:53:51.644] /dev/mem opened. [2025-09-24 03:53:51.644] Memory mapped at address 0xffffa4b44000. [2025-09-24 03:53:51.644] Read at address 0x00600018 (0xffffa4b44018): 0x00000000 [2025-09-24 03:53:51.644] Write at address 0x00600018 (0xffffa4b44018): 0x00400040, readback 0x00400040 [2025-09-24 03:53:51.692] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:53:51.708] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:53:51.852] Loaded PowerVR consumer services. [2025-09-24 03:53:51.884] 512+0 records in [2025-09-24 03:53:51.884] 512+0 records out [2025-09-24 03:53:51.916] Waiting data available... [2025-09-24 03:53:51.931] Starting syslogd/klogd: done [2025-09-24 03:53:51.964] DML Start [2025-09-24 03:53:52.124] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:53:52.332] DML res1: 0 [2025-09-24 03:53:52.812] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:53:52.833] Read Success [2025-09-24 03:53:52.833] Verifying certificate... [2025-09-24 03:53:53.088] Verified OK [2025-09-24 03:53:53.104] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:53:54.607] Verified OK [2025-09-24 03:53:54.623] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:53:55.214] Verified OK [2025-09-24 03:53:55.235] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:53:58.032] fs.protected_hardlinks = 1 [2025-09-24 03:53:58.032] fs.protected_symlinks = 1 [2025-09-24 03:53:58.032] kernel.modules_disabled = 1 [2025-09-24 03:53:58.224] [2025-09-24 03:53:58.224] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:53:59.389] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:54:07.230] SBL1:1210.0.1.0 [2025-09-24 03:54:07.261] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:54:08.844] SBL2:1210.0.1.0 [2025-09-24 03:54:08.876] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:54:08.988] j-A [2025-09-24 03:54:16.361] The R5 Autosar Classic is running [2025-09-24 03:54:16.361] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:54:16.361] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:54:16.968] INIT: version 2.96 booting [2025-09-24 03:54:17.081] INIT: Entering runlevel: 5 [2025-09-24 03:54:17.224] mtd28 attached [2025-09-24 03:54:17.241] mtd24 attached [2025-09-24 03:54:17.257] mtd32 attached [2025-09-24 03:54:17.273] ubi0:animations is mounted. [2025-09-24 03:54:17.305] RTNETLINK answers: File exists [2025-09-24 03:54:17.305] ubi1:textures is mounted. [2025-09-24 03:54:17.363] ubi2:dml_code is mounted. [2025-09-24 03:54:17.363] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:54:17.363] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:54:17.363] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:54:17.363] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:54:17.363] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:54:17.363] data.LB_FadeInType0=100 [2025-09-24 03:54:17.363] data.CHLH_FadeInType0=0 [2025-09-24 03:54:17.363] data.WU_FadeInDelay=0 [2025-09-24 03:54:17.363] max_time_out=0 [2025-09-24 03:54:17.363] No splash screen [2025-09-24 03:54:17.363] stop dss Done [2025-09-24 03:54:17.441] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:54:17.441] /dev/mem opened. [2025-09-24 03:54:17.441] Memory mapped at address 0xffffadb58000. [2025-09-24 03:54:17.441] Read at address 0x00600018 (0xffffadb58018): 0x00000000 [2025-09-24 03:54:17.441] Write at address 0x00600018 (0xffffadb58018): 0x00400040, readback 0x00400040 [2025-09-24 03:54:17.441] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:54:17.568] Loaded PowerVR consumer services. [2025-09-24 03:54:17.681] Waiting data available... [2025-09-24 03:54:17.697] 512+0 records in [2025-09-24 03:54:17.697] 512+0 records out [2025-09-24 03:54:17.729] Starting syslogd/klogd: done [2025-09-24 03:54:17.745] DML Start [2025-09-24 03:54:17.937] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:54:18.161] DML res1: 0 [2025-09-24 03:54:18.528] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:54:18.544] Read Success [2025-09-24 03:54:18.544] Verifying certificate... [2025-09-24 03:54:18.769] Verified OK [2025-09-24 03:54:18.785] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:54:20.267] Verified OK [2025-09-24 03:54:20.267] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:54:20.889] Verified OK [2025-09-24 03:54:20.889] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:54:23.640] fs.protected_hardlinks = 1 [2025-09-24 03:54:23.640] fs.protected_symlinks = 1 [2025-09-24 03:54:23.656] kernel.modules_disabled = 1 [2025-09-24 03:54:23.848] [2025-09-24 03:54:23.848] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:54:25.262] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:54:32.998] SBL1:1210.0.1.0 [2025-09-24 03:54:33.046] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:54:34.629] SBL2:1210.0.1.0 [2025-09-24 03:54:34.660] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 03:54:34.772] j-A [2025-09-24 03:54:42.112] The R5 Autosar Classic is running [2025-09-24 03:54:42.137] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:54:42.137] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:54:42.745] INIT: version 2.96 booting [2025-09-24 03:54:42.857] INIT: Entering runlevel: 5 [2025-09-24 03:54:43.017] mtd28 attached [2025-09-24 03:54:43.017] mtd24 attached [2025-09-24 03:54:43.033] mtd32 attached [2025-09-24 03:54:43.113] RTNETLINK answers: File exists [2025-09-24 03:54:43.113] ubi1:textures is mounted. [2025-09-24 03:54:43.113] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:54:43.113] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:54:43.113] ubi0:animations is mounted. [2025-09-24 03:54:43.113] ubi2:dml_code is mounted. [2025-09-24 03:54:43.113] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:54:43.113] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:54:43.113] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:54:43.136] data.LB_FadeInType0=100 [2025-09-24 03:54:43.136] data.CHLH_FadeInType0=0 [2025-09-24 03:54:43.136] data.WU_FadeInDelay=0 [2025-09-24 03:54:43.136] max_time_out=0 [2025-09-24 03:54:43.136] No splash screen [2025-09-24 03:54:43.136] stop dss Done [2025-09-24 03:54:43.168] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:54:43.184] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:54:43.221] /dev/mem opened. [2025-09-24 03:54:43.221] Memory mapped at address 0xffffa6599000. [2025-09-24 03:54:43.221] Read at address 0x00600018 (0xffffa6599018): 0x00000000 [2025-09-24 03:54:43.221] Write at address 0x00600018 (0xffffa6599018): 0x00400040, readback 0x00400040 [2025-09-24 03:54:43.414] Loaded PowerVR consumer services. [2025-09-24 03:54:43.445] 512+0 records in [2025-09-24 03:54:43.445] 512+0 records out [2025-09-24 03:54:43.477] Starting syslogd/klogd: Waiting data available... [2025-09-24 03:54:43.477] done [2025-09-24 03:54:43.493] DML Start [2025-09-24 03:54:43.685] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:54:43.909] DML res1: 0 [2025-09-24 03:54:44.305] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:54:44.305] Read Success [2025-09-24 03:54:44.305] Verifying certificate... [2025-09-24 03:54:44.545] Verified OK [2025-09-24 03:54:44.561] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:54:46.124] Verified OK [2025-09-24 03:54:46.124] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:54:46.699] Verified OK [2025-09-24 03:54:46.699] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:54:49.530] fs.protected_hardlinks = 1 [2025-09-24 03:54:49.561] fs.protected_symlinks = 1 [2025-09-24 03:54:49.561] kernel.modules_disabled = 1 [2025-09-24 03:54:49.737] [2025-09-24 03:54:49.737] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:54:50.991] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:54:58.804] SBL1:1210.0.1.0 [2025-09-24 03:54:58.852] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:55:00.419] SBL2:1210.0.1.0 [2025-09-24 03:55:00.452] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:55:00.564] j-A [2025-09-24 03:55:07.919] The R5 Autosar Classic is running [2025-09-24 03:55:07.919] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:55:07.940] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:55:08.547] INIT: version 2.96 booting [2025-09-24 03:55:08.659] INIT: Entering runlevel: 5 [2025-09-24 03:55:08.819] mtd32 attached [2025-09-24 03:55:08.819] mtd24 attached [2025-09-24 03:55:08.835] mtd28 attached [2025-09-24 03:55:08.883] RTNETLINK answers: File exists [2025-09-24 03:55:08.899] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:55:08.899] ubi1:textures is mounted. [2025-09-24 03:55:08.932] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:55:08.932] ubi2:animations is mounted. [2025-09-24 03:55:08.932] ubi0:dml_code is mounted. [2025-09-24 03:55:08.932] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:55:08.932] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:55:08.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:55:08.932] data.LB_FadeInType0=100 [2025-09-24 03:55:08.932] data.CHLH_FadeInType0=0 [2025-09-24 03:55:08.953] data.WU_FadeInDelay=0 [2025-09-24 03:55:08.953] max_time_out=0 [2025-09-24 03:55:08.953] No splash screen [2025-09-24 03:55:08.953] stop dss Done [2025-09-24 03:55:09.031] /dev/mem opened. [2025-09-24 03:55:09.031] Memory mapped at address 0xffff89d69000. [2025-09-24 03:55:09.031] Read at address 0x00600018 (0xffff89d69018): 0x00000000 [2025-09-24 03:55:09.031] Write at address 0x00600018 (0xffff89d69018): 0x00400040, readback 0x00400040 [2025-09-24 03:55:09.031] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:55:09.031] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:55:09.271] Loaded PowerVR consumer services. [2025-09-24 03:55:09.317] Waiting data available... [2025-09-24 03:55:09.318] 512+0 records in [2025-09-24 03:55:09.318] 512+0 records out [2025-09-24 03:55:09.365] Starting syslogd/klogd: done [2025-09-24 03:55:09.381] DML Start [2025-09-24 03:55:09.525] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:55:09.749] DML res1: 0 [2025-09-24 03:55:10.204] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:55:10.204] Read Success [2025-09-24 03:55:10.204] Verifying certificate... [2025-09-24 03:55:10.428] Verified OK [2025-09-24 03:55:10.444] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:55:12.056] Verified OK [2025-09-24 03:55:12.056] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:55:12.632] Verified OK [2025-09-24 03:55:12.632] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:55:15.303] fs.protected_hardlinks = 1 [2025-09-24 03:55:15.303] fs.protected_symlinks = 1 [2025-09-24 03:55:15.318] kernel.modules_disabled = 1 [2025-09-24 03:55:15.510] [2025-09-24 03:55:15.510] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:55:16.879] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:55:24.635] SBL1:1210.0.1.0 [2025-09-24 03:55:24.683] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:55:26.250] SBL2:1210.0.1.0 [2025-09-24 03:55:26.298] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:55:26.394] j-A [2025-09-24 03:55:33.748] The R5 Autosar Classic is running [2025-09-24 03:55:33.771] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:55:33.771] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:55:34.379] INIT: version 2.96 booting [2025-09-24 03:55:34.491] INIT: Entering runlevel: 5 [2025-09-24 03:55:34.635] mtd24 attached [2025-09-24 03:55:34.651] mtd32 attached [2025-09-24 03:55:34.651] mtd28 attached [2025-09-24 03:55:34.683] ubi0:textures is mounted. [2025-09-24 03:55:34.715] RTNETLINK answers: File exists [2025-09-24 03:55:34.715] ubi2:animations is mounted. [2025-09-24 03:55:34.768] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:55:34.768] ubi1:dml_code is mounted. [2025-09-24 03:55:34.768] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:55:34.768] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:55:34.768] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:55:34.768] data.LB_FadeInType0=100 [2025-09-24 03:55:34.768] data.CHLH_FadeInType0=0 [2025-09-24 03:55:34.768] data.WU_FadeInDelay=0 [2025-09-24 03:55:34.768] max_time_out=0 [2025-09-24 03:55:34.768] No splash screen [2025-09-24 03:55:34.768] stop dss Done [2025-09-24 03:55:34.768] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:55:34.846] /dev/mem opened. [2025-09-24 03:55:34.846] Memory mapped at address 0xffff81dd1000. [2025-09-24 03:55:34.846] Read at address 0x00600018 (0xffff81dd1018): 0x00000000 [2025-09-24 03:55:34.846] Write at address 0x00600018 (0xffff81dd1018): 0x00400040, readback 0x00400040 [2025-09-24 03:55:34.846] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:55:34.846] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:55:34.943] Loaded PowerVR consumer services. [2025-09-24 03:55:35.100] 512+0 records in [2025-09-24 03:55:35.100] 512+0 records out [2025-09-24 03:55:35.100] Waiting data available... [2025-09-24 03:55:35.131] Starting syslogd/klogd: done [2025-09-24 03:55:35.147] DML Start [2025-09-24 03:55:35.324] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:55:35.564] DML res1: 0 [2025-09-24 03:55:35.962] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:55:35.962] Read Success [2025-09-24 03:55:35.962] Verifying certificate... [2025-09-24 03:55:36.219] Verified OK [2025-09-24 03:55:36.234] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:55:38.037] Verified OK [2025-09-24 03:55:38.037] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:55:38.622] Verified OK [2025-09-24 03:55:38.623] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:55:41.181] fs.protected_hardlinks = 1 [2025-09-24 03:55:41.196] fs.protected_symlinks = 1 [2025-09-24 03:55:41.196] kernel.modules_disabled = 1 [2025-09-24 03:55:41.405] [2025-09-24 03:55:41.405] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:55:42.652] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:55:50.428] SBL1:1210.0.1.0 [2025-09-24 03:55:50.476] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:55:52.043] SBL2:1210.0.1.0 [2025-09-24 03:55:52.075] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 03:55:52.187] j-A [2025-09-24 03:55:59.541] The R5 Autosar Classic is running [2025-09-24 03:55:59.541] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:55:59.562] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:56:00.169] INIT: version 2.96 booting [2025-09-24 03:56:00.280] INIT: Entering runlevel: 5 [2025-09-24 03:56:00.441] mtd28 attached [2025-09-24 03:56:00.441] mtd32 attached [2025-09-24 03:56:00.457] mtd24 attached [2025-09-24 03:56:00.505] ubi0:animations is mounted. [2025-09-24 03:56:00.505] RTNETLINK answers: File exists [2025-09-24 03:56:00.541] ubi1:dml_code is mounted. [2025-09-24 03:56:00.541] ubi2:textures is mounted. [2025-09-24 03:56:00.541] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:56:00.541] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:56:00.541] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:56:00.578] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:56:00.578] data.LB_FadeInType0=100 [2025-09-24 03:56:00.578] data.CHLH_FadeInType0=0 [2025-09-24 03:56:00.578] data.WU_FadeInDelay=0 [2025-09-24 03:56:00.578] max_time_out=0 [2025-09-24 03:56:00.578] No splash screen [2025-09-24 03:56:00.578] stop dss Done [2025-09-24 03:56:00.578] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:56:00.610] /dev/mem opened. [2025-09-24 03:56:00.610] Memory mapped at address 0xffff9bf65000. [2025-09-24 03:56:00.637] Read at address 0x00600018 (0xffff9bf65018): 0x00000000 [2025-09-24 03:56:00.637] Write at address 0x00600018 (0xffff9bf65018): 0x00400040, readback 0x00400040 [2025-09-24 03:56:00.701] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:56:00.701] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:56:00.845] Loaded PowerVR consumer services. [2025-09-24 03:56:00.860] 512+0 records in [2025-09-24 03:56:00.876] 512+0 records out [2025-09-24 03:56:00.908] Waiting data available... [2025-09-24 03:56:00.924] Starting syslogd/klogd: done [2025-09-24 03:56:00.940] DML Start [2025-09-24 03:56:01.084] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:56:01.261] DML res1: 0 [2025-09-24 03:56:01.836] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:56:01.857] Read Success [2025-09-24 03:56:01.857] Verifying certificate... [2025-09-24 03:56:02.129] Verified OK [2025-09-24 03:56:02.145] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:56:03.948] Verified OK [2025-09-24 03:56:03.948] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:56:04.485] Verified OK [2025-09-24 03:56:04.485] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:56:06.996] fs.protected_hardlinks = 1 [2025-09-24 03:56:07.012] fs.protected_symlinks = 1 [2025-09-24 03:56:07.012] kernel.modules_disabled = 1 [2025-09-24 03:56:07.205] [2025-09-24 03:56:07.205] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:56:08.419] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:56:16.225] SBL1:1210.0.1.0 [2025-09-24 03:56:16.273] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:56:17.840] SBL2:1210.0.1.0 [2025-09-24 03:56:17.872] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:56:17.984] j-A [2025-09-24 03:56:25.339] The R5 Autosar Classic is running [2025-09-24 03:56:25.339] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:56:25.359] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:56:25.968] INIT: version 2.96 booting [2025-09-24 03:56:26.079] INIT: Entering runlevel: 5 [2025-09-24 03:56:26.239] mtd24 attached [2025-09-24 03:56:26.239] mtd32 attached [2025-09-24 03:56:26.255] mtd28 attached [2025-09-24 03:56:26.271] ubi0:textures is mounted. [2025-09-24 03:56:26.303] RTNETLINK answers: File exists [2025-09-24 03:56:26.338] ubi1:dml_code is mounted. [2025-09-24 03:56:26.338] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:56:26.338] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:56:26.338] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:56:26.338] ubi2:animations is mounted. [2025-09-24 03:56:26.338] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:56:26.338] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:56:26.365] data.LB_FadeInType0=100 [2025-09-24 03:56:26.365] data.CHLH_FadeInType0=0 [2025-09-24 03:56:26.365] data.WU_FadeInDelay=0 [2025-09-24 03:56:26.365] max_time_out=0 [2025-09-24 03:56:26.365] No splash screen [2025-09-24 03:56:26.365] stop dss Done [2025-09-24 03:56:26.397] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:56:26.413] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:56:26.413] /dev/mem opened. [2025-09-24 03:56:26.445] Memory mapped at address 0xffff9dd0a000. [2025-09-24 03:56:26.445] Read at address 0x00600018 (0xffff9dd0a018): 0x00000000 [2025-09-24 03:56:26.445] Write at address 0x00600018 (0xffff9dd0a018): 0x00400040, readback 0x00400040 [2025-09-24 03:56:26.573] Loaded PowerVR consumer services. [2025-09-24 03:56:26.669] Waiting data available... [2025-09-24 03:56:26.685] 512+0 records in [2025-09-24 03:56:26.685] 512+0 records out [2025-09-24 03:56:26.717] Starting syslogd/klogd: done [2025-09-24 03:56:26.733] DML Start [2025-09-24 03:56:26.925] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:56:27.132] DML res1: 0 [2025-09-24 03:56:27.602] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:56:27.602] Read Success [2025-09-24 03:56:27.602] Verifying certificate... [2025-09-24 03:56:27.858] Verified OK [2025-09-24 03:56:27.873] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:56:29.536] Verified OK [2025-09-24 03:56:29.536] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:56:30.138] Verified OK [2025-09-24 03:56:30.138] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:56:32.696] fs.protected_hardlinks = 1 [2025-09-24 03:56:32.696] fs.protected_symlinks = 1 [2025-09-24 03:56:32.712] kernel.modules_disabled = 1 [2025-09-24 03:56:32.904] [2025-09-24 03:56:32.904] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:56:34.245] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:56:42.027] SBL1:1210.0.1.0 [2025-09-24 03:56:42.059] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:56:43.642] SBL2:1210.0.1.0 [2025-09-24 03:56:43.674] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 03:56:43.786] j-A [2025-09-24 03:56:51.124] The R5 Autosar Classic is running [2025-09-24 03:56:51.156] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:56:51.156] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:56:51.763] INIT: version 2.96 booting [2025-09-24 03:56:51.875] INIT: Entering runlevel: 5 [2025-09-24 03:56:52.035] mtd24 attached [2025-09-24 03:56:52.035] mtd32 attached [2025-09-24 03:56:52.051] mtd28 attached [2025-09-24 03:56:52.067] ubi0:textures is mounted. [2025-09-24 03:56:52.098] RTNETLINK answers: File exists [2025-09-24 03:56:52.135] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:56:52.135] ubi2:animations is mounted. [2025-09-24 03:56:52.135] ubi1:dml_code is mounted. [2025-09-24 03:56:52.135] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:56:52.135] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:56:52.135] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:56:52.135] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:56:52.163] data.LB_FadeInType0=100 [2025-09-24 03:56:52.163] data.CHLH_FadeInType0=0 [2025-09-24 03:56:52.163] data.WU_FadeInDelay=0 [2025-09-24 03:56:52.163] max_time_out=0 [2025-09-24 03:56:52.163] No splash screen [2025-09-24 03:56:52.163] stop dss Done [2025-09-24 03:56:52.179] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:56:52.195] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:56:52.247] /dev/mem opened. [2025-09-24 03:56:52.247] Memory mapped at address 0xffffa2311000. [2025-09-24 03:56:52.247] Read at address 0x00600018 (0xffffa2311018): 0x00000000 [2025-09-24 03:56:52.247] Write at address 0x00600018 (0xffffa2311018): 0x00400040, readback 0x00400040 [2025-09-24 03:56:52.343] Loaded PowerVR consumer services. [2025-09-24 03:56:52.494] Waiting data available... [2025-09-24 03:56:52.494] 512+0 records in [2025-09-24 03:56:52.494] 512+0 records out [2025-09-24 03:56:52.526] Starting syslogd/klogd: done [2025-09-24 03:56:52.542] DML Start [2025-09-24 03:56:52.717] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:56:52.941] DML res1: 0 [2025-09-24 03:56:53.421] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:56:53.421] Read Success [2025-09-24 03:56:53.437] Verifying certificate... [2025-09-24 03:56:53.676] Verified OK [2025-09-24 03:56:53.692] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:56:55.291] Verified OK [2025-09-24 03:56:55.291] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:56:55.905] Verified OK [2025-09-24 03:56:55.905] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:56:58.606] fs.protected_hardlinks = 1 [2025-09-24 03:56:58.606] fs.protected_symlinks = 1 [2025-09-24 03:56:58.622] kernel.modules_disabled = 1 [2025-09-24 03:56:58.814] [2025-09-24 03:56:58.814] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:57:00.008] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:57:07.820] SBL1:1210.0.1.0 [2025-09-24 03:57:07.868] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:57:09.435] SBL2:1210.0.1.0 [2025-09-24 03:57:09.483] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:57:09.579] j-A [2025-09-24 03:57:16.935] The R5 Autosar Classic is running [2025-09-24 03:57:16.958] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:57:16.958] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:57:17.565] INIT: version 2.96 booting [2025-09-24 03:57:17.676] INIT: Entering runlevel: 5 [2025-09-24 03:57:17.821] mtd24 attached [2025-09-24 03:57:17.836] mtd28 attached [2025-09-24 03:57:17.852] mtd32 attached [2025-09-24 03:57:17.901] RTNETLINK answers: File exists [2025-09-24 03:57:17.901] ubi0:textures is mounted. [2025-09-24 03:57:17.959] ubi1:animations is mounted. [2025-09-24 03:57:17.959] ubi2:dml_code is mounted. [2025-09-24 03:57:17.959] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:57:17.959] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:57:17.959] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:57:17.959] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:57:17.959] data.LB_FadeInType0=100 [2025-09-24 03:57:17.959] data.CHLH_FadeInType0=0 [2025-09-24 03:57:17.959] data.WU_FadeInDelay=0 [2025-09-24 03:57:17.959] max_time_out=0 [2025-09-24 03:57:17.959] No splash screen [2025-09-24 03:57:17.959] stop dss Done [2025-09-24 03:57:17.959] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:57:18.044] /dev/mem opened. [2025-09-24 03:57:18.044] Memory mapped at address 0xffff90616000. [2025-09-24 03:57:18.044] Read at address 0x00600018 (0xffff90616018): 0x00000000 [2025-09-24 03:57:18.044] Write at address 0x00600018 (0xffff90616018): 0x00400040, readback 0x00400040 [2025-09-24 03:57:18.044] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:57:18.044] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:57:18.107] Loaded PowerVR consumer services. [2025-09-24 03:57:18.290] 512+0 records in [2025-09-24 03:57:18.290] 512+0 records out [2025-09-24 03:57:18.290] Waiting data available... [2025-09-24 03:57:18.322] Starting syslogd/klogd: done [2025-09-24 03:57:18.338] DML Start [2025-09-24 03:57:18.546] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:57:18.769] DML res1: 0 [2025-09-24 03:57:19.168] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:57:19.168] Read Success [2025-09-24 03:57:19.168] Verifying certificate... [2025-09-24 03:57:19.408] Verified OK [2025-09-24 03:57:19.424] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:57:20.937] Verified OK [2025-09-24 03:57:20.937] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:57:21.576] Verified OK [2025-09-24 03:57:21.576] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:57:24.357] fs.protected_hardlinks = 1 [2025-09-24 03:57:24.357] fs.protected_symlinks = 1 [2025-09-24 03:57:24.373] kernel.modules_disabled = 1 [2025-09-24 03:57:24.581] [2025-09-24 03:57:24.581] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:57:25.859] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:57:33.649] SBL1:1210.0.1.0 [2025-09-24 03:57:33.681] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:57:35.264] SBL2:1210.0.1.0 [2025-09-24 03:57:35.296] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:57:35.408] j-A [2025-09-24 03:57:42.779] The R5 Autosar Classic is running [2025-09-24 03:57:42.779] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:57:42.779] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:57:43.386] INIT: version 2.96 booting [2025-09-24 03:57:43.498] INIT: Entering runlevel: 5 [2025-09-24 03:57:43.658] mtd32 attached [2025-09-24 03:57:43.658] mtd24 attached [2025-09-24 03:57:43.674] mtd28 attached [2025-09-24 03:57:43.722] RTNETLINK answers: File exists [2025-09-24 03:57:43.722] ubi0:dml_code is mounted. [2025-09-24 03:57:43.758] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:57:43.758] ubi1:textures is mounted. [2025-09-24 03:57:43.758] ubi2:animations is mounted. [2025-09-24 03:57:43.758] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:57:43.758] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:57:43.758] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:57:43.758] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:57:43.779] data.LB_FadeInType0=100 [2025-09-24 03:57:43.779] data.CHLH_FadeInType0=0 [2025-09-24 03:57:43.779] data.WU_FadeInDelay=0 [2025-09-24 03:57:43.779] max_time_out=0 [2025-09-24 03:57:43.779] No splash screen [2025-09-24 03:57:43.779] stop dss Done [2025-09-24 03:57:43.872] /dev/mem opened. [2025-09-24 03:57:43.872] Memory mapped at address 0xffff95731000. [2025-09-24 03:57:43.872] Read at address 0x00600018 (0xffff95731018): 0x00000000 [2025-09-24 03:57:43.872] Write at address 0x00600018 (0xffff95731018): 0x00400040, readback 0x00400040 [2025-09-24 03:57:43.872] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:57:43.872] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:57:43.967] Loaded PowerVR consumer services. [2025-09-24 03:57:44.096] 512+0 records in [2025-09-24 03:57:44.112] 512+0 records out [2025-09-24 03:57:44.112] Waiting data available... [2025-09-24 03:57:44.128] Starting syslogd/klogd: done [2025-09-24 03:57:44.144] DML Start [2025-09-24 03:57:44.335] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:57:44.544] DML res1: 0 [2025-09-24 03:57:45.012] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:57:45.012] Read Success [2025-09-24 03:57:45.012] Verifying certificate... [2025-09-24 03:57:45.251] Verified OK [2025-09-24 03:57:45.267] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:57:46.874] Verified OK [2025-09-24 03:57:46.874] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:57:47.496] Verified OK [2025-09-24 03:57:47.496] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:57:50.134] fs.protected_hardlinks = 1 [2025-09-24 03:57:50.134] fs.protected_symlinks = 1 [2025-09-24 03:57:50.150] kernel.modules_disabled = 1 [2025-09-24 03:57:50.357] [2025-09-24 03:57:50.357] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:57:51.664] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:57:59.442] SBL1:1210.0.1.0 [2025-09-24 03:57:59.490] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:58:01.057] SBL2:1210.0.1.0 [2025-09-24 03:58:01.105] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:58:01.201] j-A [2025-09-24 03:58:08.557] The R5 Autosar Classic is running [2025-09-24 03:58:08.579] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:58:08.579] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:58:09.187] INIT: version 2.96 booting [2025-09-24 03:58:09.298] INIT: Entering runlevel: 5 [2025-09-24 03:58:09.458] mtd32 attached [2025-09-24 03:58:09.474] mtd28 attached [2025-09-24 03:58:09.474] mtd24 attached [2025-09-24 03:58:09.522] RTNETLINK answers: File exists [2025-09-24 03:58:09.590] ubi1:animations is mounted. [2025-09-24 03:58:09.590] ubi2:textures is mounted. [2025-09-24 03:58:09.590] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:58:09.590] ubi0:dml_code is mounted. [2025-09-24 03:58:09.590] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:58:09.590] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:58:09.590] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:58:09.590] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:58:09.590] data.LB_FadeInType0=100 [2025-09-24 03:58:09.590] data.CHLH_FadeInType0=0 [2025-09-24 03:58:09.590] data.WU_FadeInDelay=0 [2025-09-24 03:58:09.590] max_time_out=0 [2025-09-24 03:58:09.590] No splash screen [2025-09-24 03:58:09.590] stop dss Done [2025-09-24 03:58:09.638] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:58:09.670] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:58:09.670] /dev/mem opened. [2025-09-24 03:58:09.670] Memory mapped at address 0xffffa8f3b000. [2025-09-24 03:58:09.670] Read at address 0x00600018 (0xffffa8f3b018): 0x00000000 [2025-09-24 03:58:09.670] Write at address 0x00600018 (0xffffa8f3b018): 0x00400040, readback 0x00400040 [2025-09-24 03:58:09.782] Loaded PowerVR consumer services. [2025-09-24 03:58:09.926] 512+0 records in [2025-09-24 03:58:09.926] 512+0 records out [2025-09-24 03:58:09.926] Waiting data available... [2025-09-24 03:58:09.974] Starting syslogd/klogd: done [2025-09-24 03:58:09.990] DML Start [2025-09-24 03:58:10.182] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:58:10.422] DML res1: 0 [2025-09-24 03:58:10.786] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:58:10.786] Read Success [2025-09-24 03:58:10.786] Verifying certificate... [2025-09-24 03:58:11.025] Verified OK [2025-09-24 03:58:11.041] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:58:12.768] Verified OK [2025-09-24 03:58:12.789] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:58:13.330] Verified OK [2025-09-24 03:58:13.330] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:58:15.873] fs.protected_hardlinks = 1 [2025-09-24 03:58:15.873] fs.protected_symlinks = 1 [2025-09-24 03:58:15.888] kernel.modules_disabled = 1 [2025-09-24 03:58:16.080] [2025-09-24 03:58:16.080] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:58:17.487] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:58:25.249] SBL1:1210.0.1.0 [2025-09-24 03:58:25.297] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:58:26.864] SBL2:1210.0.1.0 [2025-09-24 03:58:26.895] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:58:27.007] j-A [2025-09-24 03:58:34.384] The R5 Autosar Classic is running [2025-09-24 03:58:34.384] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:58:34.384] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:58:34.991] INIT: version 2.96 booting [2025-09-24 03:58:35.103] INIT: Entering runlevel: 5 [2025-09-24 03:58:35.264] mtd28 attached [2025-09-24 03:58:35.264] mtd32 attached [2025-09-24 03:58:35.280] mtd24 attached [2025-09-24 03:58:35.296] ubi0:animations is mounted. [2025-09-24 03:58:35.327] RTNETLINK answers: File exists [2025-09-24 03:58:35.389] ubi2:textures is mounted. [2025-09-24 03:58:35.389] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:58:35.389] ubi1:dml_code is mounted. [2025-09-24 03:58:35.389] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:58:35.389] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:58:35.389] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:58:35.389] data.LB_FadeInType0=100 [2025-09-24 03:58:35.389] data.CHLH_FadeInType0=0 [2025-09-24 03:58:35.389] data.WU_FadeInDelay=0 [2025-09-24 03:58:35.389] max_time_out=0 [2025-09-24 03:58:35.389] No splash screen [2025-09-24 03:58:35.389] stop dss Done [2025-09-24 03:58:35.389] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:58:35.437] /dev/mem opened. [2025-09-24 03:58:35.437] Memory mapped at address 0xffffbbec1000. [2025-09-24 03:58:35.475] Read at address 0x00600018 (0xffffbbec1018): 0x00000000 [2025-09-24 03:58:35.475] Write at address 0x00600018 (0xffffbbec1018): 0x00400040, readback 0x00400040 [2025-09-24 03:58:35.475] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:58:35.491] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:58:35.555] Loaded PowerVR consumer services. [2025-09-24 03:58:35.714] Waiting data available... [2025-09-24 03:58:35.714] 512+0 records in [2025-09-24 03:58:35.714] 512+0 records out [2025-09-24 03:58:35.745] Starting syslogd/klogd: done [2025-09-24 03:58:35.761] DML Start [2025-09-24 03:58:35.938] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:58:36.162] DML res1: 0 [2025-09-24 03:58:36.586] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:58:36.586] Read Success [2025-09-24 03:58:36.586] Verifying certificate... [2025-09-24 03:58:36.827] Verified OK [2025-09-24 03:58:36.843] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:58:38.518] Verified OK [2025-09-24 03:58:38.518] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:58:39.167] Verified OK [2025-09-24 03:58:39.167] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:58:41.805] fs.protected_hardlinks = 1 [2025-09-24 03:58:41.821] fs.protected_symlinks = 1 [2025-09-24 03:58:41.821] kernel.modules_disabled = 1 [2025-09-24 03:58:42.013] [2025-09-24 03:58:42.013] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:58:43.218] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:58:51.058] SBL1:1210.0.1.0 [2025-09-24 03:58:51.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:58:52.673] SBL2:1210.0.1.0 [2025-09-24 03:58:52.705] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:58:52.816] j-A [2025-09-24 03:59:00.156] The R5 Autosar Classic is running [2025-09-24 03:59:00.181] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:59:00.181] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:59:00.789] INIT: version 2.96 booting [2025-09-24 03:59:00.901] INIT: Entering runlevel: 5 [2025-09-24 03:59:01.060] mtd24 attached [2025-09-24 03:59:01.076] mtd32 attached [2025-09-24 03:59:01.076] mtd28 attached [2025-09-24 03:59:01.193] ubi0:textures is mounted. [2025-09-24 03:59:01.193] ubi1:dml_code is mounted. [2025-09-24 03:59:01.193] RTNETLINK answers: File exists [2025-09-24 03:59:01.193] ubi2:animations is mounted. [2025-09-24 03:59:01.193] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:59:01.193] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:59:01.193] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:59:01.193] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:59:01.193] data.LB_FadeInType0=100 [2025-09-24 03:59:01.193] data.CHLH_FadeInType0=0 [2025-09-24 03:59:01.193] data.WU_FadeInDelay=0 [2025-09-24 03:59:01.193] max_time_out=0 [2025-09-24 03:59:01.193] No splash screen [2025-09-24 03:59:01.193] stop dss Done [2025-09-24 03:59:01.193] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:59:01.224] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:59:01.240] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:59:01.240] /dev/mem opened. [2025-09-24 03:59:01.272] Memory mapped at address 0xffffa1379000. [2025-09-24 03:59:01.272] Read at address 0x00600018 (0xffffa1379018): 0x00000000 [2025-09-24 03:59:01.272] Write at address 0x00600018 (0xffffa1379018): 0x00400040, readback 0x00400040 [2025-09-24 03:59:01.480] Loaded PowerVR consumer services. [2025-09-24 03:59:01.496] Waiting data available... [2025-09-24 03:59:01.528] 512+0 records in [2025-09-24 03:59:01.528] 512+0 records out [2025-09-24 03:59:01.576] Starting syslogd/klogd: done [2025-09-24 03:59:01.593] DML Start [2025-09-24 03:59:01.768] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:59:01.977] DML res1: 0 [2025-09-24 03:59:02.431] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:59:02.431] Read Success [2025-09-24 03:59:02.431] Verifying certificate... [2025-09-24 03:59:02.655] Verified OK [2025-09-24 03:59:02.687] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:59:04.493] Verified OK [2025-09-24 03:59:04.493] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:59:05.059] Verified OK [2025-09-24 03:59:05.059] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:59:07.682] fs.protected_hardlinks = 1 [2025-09-24 03:59:07.698] fs.protected_symlinks = 1 [2025-09-24 03:59:07.698] kernel.modules_disabled = 1 [2025-09-24 03:59:07.890] [2025-09-24 03:59:07.890] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:59:09.096] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:59:16.856] SBL1:1210.0.1.0 [2025-09-24 03:59:16.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:59:18.471] SBL2:1210.0.1.0 [2025-09-24 03:59:18.519] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:59:18.616] j-A [2025-09-24 03:59:25.970] The R5 Autosar Classic is running [2025-09-24 03:59:25.995] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:59:25.995] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:59:26.603] INIT: version 2.96 booting [2025-09-24 03:59:26.715] INIT: Entering runlevel: 5 [2025-09-24 03:59:26.875] mtd32 attached [2025-09-24 03:59:26.891] mtd28 attached [2025-09-24 03:59:26.891] mtd24 attached [2025-09-24 03:59:26.939] RTNETLINK answers: File exists [2025-09-24 03:59:26.939] ubi1:animations is mounted. [2025-09-24 03:59:27.008] ubi0:dml_code is mounted. [2025-09-24 03:59:27.008] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:59:27.008] ubi2:textures is mounted. [2025-09-24 03:59:27.008] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:59:27.008] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:59:27.008] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:59:27.008] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:59:27.008] data.LB_FadeInType0=100 [2025-09-24 03:59:27.008] data.CHLH_FadeInType0=0 [2025-09-24 03:59:27.008] data.WU_FadeInDelay=0 [2025-09-24 03:59:27.008] max_time_out=0 [2025-09-24 03:59:27.008] No splash screen [2025-09-24 03:59:27.008] stop dss Done [2025-09-24 03:59:27.077] /dev/mem opened. [2025-09-24 03:59:27.077] Memory mapped at address 0xffff968a4000. [2025-09-24 03:59:27.077] Read at address 0x00600018 (0xffff968a4018): 0x00000000 [2025-09-24 03:59:27.077] Write at address 0x00600018 (0xffff968a4018): 0x00400040, readback 0x00400040 [2025-09-24 03:59:27.077] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:59:27.093] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:59:27.284] Loaded PowerVR consumer services. [2025-09-24 03:59:27.316] Waiting data available... [2025-09-24 03:59:27.332] 512+0 records in [2025-09-24 03:59:27.332] 512+0 records out [2025-09-24 03:59:27.380] Starting syslogd/klogd: done [2025-09-24 03:59:27.397] DML Start [2025-09-24 03:59:27.588] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:59:27.796] DML res1: 0 [2025-09-24 03:59:28.245] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:59:28.266] Read Success [2025-09-24 03:59:28.266] Verifying certificate... [2025-09-24 03:59:28.553] Verified OK [2025-09-24 03:59:28.569] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:59:30.288] Verified OK [2025-09-24 03:59:30.288] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:59:30.870] Verified OK [2025-09-24 03:59:30.870] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:59:33.412] fs.protected_hardlinks = 1 [2025-09-24 03:59:33.412] fs.protected_symlinks = 1 [2025-09-24 03:59:33.428] kernel.modules_disabled = 1 [2025-09-24 03:59:33.621] [2025-09-24 03:59:33.621] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 03:59:34.836] RTNETLINK answers: Cannot assign requested address [2025-09-24 03:59:42.674] SBL1:1210.0.1.0 [2025-09-24 03:59:42.722] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:59:44.288] SBL2:1210.0.1.0 [2025-09-24 03:59:44.320] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 03:59:44.432] j-A [2025-09-24 03:59:51.787] The R5 Autosar Classic is running [2025-09-24 03:59:51.787] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 03:59:51.808] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 03:59:52.415] INIT: version 2.96 booting [2025-09-24 03:59:52.527] INIT: Entering runlevel: 5 [2025-09-24 03:59:52.687] mtd32 attached [2025-09-24 03:59:52.687] mtd24 attached [2025-09-24 03:59:52.703] mtd28 attached [2025-09-24 03:59:52.751] RTNETLINK answers: File exists [2025-09-24 03:59:52.815] ubi0:dml_code is mounted. [2025-09-24 03:59:52.815] ubi1:textures is mounted. [2025-09-24 03:59:52.815] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 03:59:52.815] ubi2:animations is mounted. [2025-09-24 03:59:52.815] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 03:59:52.815] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 03:59:52.815] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 03:59:52.815] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 03:59:52.815] data.LB_FadeInType0=100 [2025-09-24 03:59:52.815] data.CHLH_FadeInType0=0 [2025-09-24 03:59:52.815] data.WU_FadeInDelay=0 [2025-09-24 03:59:52.815] max_time_out=0 [2025-09-24 03:59:52.815] No splash screen [2025-09-24 03:59:52.815] stop dss Done [2025-09-24 03:59:52.885] /dev/mem opened. [2025-09-24 03:59:52.885] Memory mapped at address 0xffff859e6000. [2025-09-24 03:59:52.885] Read at address 0x00600018 (0xffff859e6018): 0x00000000 [2025-09-24 03:59:52.885] Write at address 0x00600018 (0xffff859e6018): 0x00400040, readback 0x00400040 [2025-09-24 03:59:52.885] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 03:59:52.901] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 03:59:53.061] Loaded PowerVR consumer services. [2025-09-24 03:59:53.157] Waiting data available... [2025-09-24 03:59:53.173] 512+0 records in [2025-09-24 03:59:53.173] 512+0 records out [2025-09-24 03:59:53.221] Starting syslogd/klogd: done [2025-09-24 03:59:53.237] DML Start [2025-09-24 03:59:53.396] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 03:59:53.653] DML res1: 0 [2025-09-24 03:59:54.027] Read DML Algo certificate (mtd31) and save to file [2025-09-24 03:59:54.027] Read Success [2025-09-24 03:59:54.027] Verifying certificate... [2025-09-24 03:59:54.251] Verified OK [2025-09-24 03:59:54.283] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 03:59:55.937] Verified OK [2025-09-24 03:59:55.937] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 03:59:56.536] Verified OK [2025-09-24 03:59:56.536] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 03:59:59.047] fs.protected_hardlinks = 1 [2025-09-24 03:59:59.047] fs.protected_symlinks = 1 [2025-09-24 03:59:59.062] kernel.modules_disabled = 1 [2025-09-24 03:59:59.255] [2025-09-24 03:59:59.255] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:00:00.771] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:00:08.502] SBL1:1210.0.1.0 [2025-09-24 04:00:08.534] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:00:10.117] SBL2:1210.0.1.0 [2025-09-24 04:00:10.149] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:00:10.261] j-A [2025-09-24 04:00:17.634] The R5 Autosar Classic is running [2025-09-24 04:00:17.634] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:00:17.634] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:00:18.242] INIT: version 2.96 booting [2025-09-24 04:00:18.353] INIT: Entering runlevel: 5 [2025-09-24 04:00:18.513] mtd32 attached [2025-09-24 04:00:18.529] mtd28 attached [2025-09-24 04:00:18.529] mtd24 attached [2025-09-24 04:00:18.577] RTNETLINK answers: File exists [2025-09-24 04:00:18.643] ubi1:animations is mounted. [2025-09-24 04:00:18.643] ubi0:dml_code is mounted. [2025-09-24 04:00:18.643] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:00:18.643] ubi2:textures is mounted. [2025-09-24 04:00:18.643] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:00:18.643] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:00:18.643] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:00:18.643] data.LB_FadeInType0=100 [2025-09-24 04:00:18.643] data.CHLH_FadeInType0=0 [2025-09-24 04:00:18.643] data.WU_FadeInDelay=0 [2025-09-24 04:00:18.643] max_time_out=0 [2025-09-24 04:00:18.643] No splash screen [2025-09-24 04:00:18.643] stop dss Done [2025-09-24 04:00:18.643] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:00:18.674] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:00:18.716] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:00:18.716] /dev/mem opened. [2025-09-24 04:00:18.716] Memory mapped at address 0xffff84bcb000. [2025-09-24 04:00:18.716] Read at address 0x00600018 (0xffff84bcb018): 0x00000000 [2025-09-24 04:00:18.716] Write at address 0x00600018 (0xffff84bcb018): 0x00400040, readback 0x00400040 [2025-09-24 04:00:18.811] Loaded PowerVR consumer services. [2025-09-24 04:00:18.956] Waiting data available... [2025-09-24 04:00:18.956] 512+0 records in [2025-09-24 04:00:18.956] 512+0 records out [2025-09-24 04:00:18.988] Starting syslogd/klogd: done [2025-09-24 04:00:19.004] DML Start [2025-09-24 04:00:19.195] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:00:19.404] DML res1: 0 [2025-09-24 04:00:19.898] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:00:19.898] Read Success [2025-09-24 04:00:19.898] Verifying certificate... [2025-09-24 04:00:20.153] Verified OK [2025-09-24 04:00:20.185] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:00:21.864] Verified OK [2025-09-24 04:00:21.864] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:00:22.480] Verified OK [2025-09-24 04:00:22.480] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:00:24.976] fs.protected_hardlinks = 1 [2025-09-24 04:00:24.976] fs.protected_symlinks = 1 [2025-09-24 04:00:24.992] kernel.modules_disabled = 1 [2025-09-24 04:00:25.183] [2025-09-24 04:00:25.183] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:00:26.494] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:00:34.284] SBL1:1210.0.1.0 [2025-09-24 04:00:34.332] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:00:35.898] SBL2:1210.0.1.0 [2025-09-24 04:00:35.946] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:00:36.042] j-A [2025-09-24 04:00:43.395] The R5 Autosar Classic is running [2025-09-24 04:00:43.418] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:00:43.418] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:00:44.026] INIT: version 2.96 booting [2025-09-24 04:00:44.139] INIT: Entering runlevel: 5 [2025-09-24 04:00:44.298] mtd28 attached [2025-09-24 04:00:44.314] mtd24 attached [2025-09-24 04:00:44.330] mtd32 attached [2025-09-24 04:00:44.346] ubi0:animations is mounted. [2025-09-24 04:00:44.378] RTNETLINK answers: File exists [2025-09-24 04:00:44.378] ubi1:textures is mounted. [2025-09-24 04:00:44.426] ubi2:dml_code is mounted. [2025-09-24 04:00:44.426] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:00:44.426] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:00:44.426] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:00:44.426] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:00:44.426] data.LB_FadeInType0=100 [2025-09-24 04:00:44.426] data.CHLH_FadeInType0=0 [2025-09-24 04:00:44.426] data.WU_FadeInDelay=0 [2025-09-24 04:00:44.426] max_time_out=0 [2025-09-24 04:00:44.426] No splash screen [2025-09-24 04:00:44.426] stop dss Done [2025-09-24 04:00:44.426] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:00:44.458] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:00:44.492] /dev/mem opened. [2025-09-24 04:00:44.492] Memory mapped at address 0xffffa8008000. [2025-09-24 04:00:44.492] Read at address 0x00600018 (0xffffa8008018): 0x00000000 [2025-09-24 04:00:44.492] Write at address 0x00600018 (0xffffa8008018): 0x00400040, readback 0x00400040 [2025-09-24 04:00:44.492] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:00:44.652] Loaded PowerVR consumer services. [2025-09-24 04:00:44.747] Waiting data available... [2025-09-24 04:00:44.763] 512+0 records in [2025-09-24 04:00:44.763] 512+0 records out [2025-09-24 04:00:44.811] Starting syslogd/klogd: done [2025-09-24 04:00:44.827] DML Start [2025-09-24 04:00:45.020] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:00:45.244] DML res1: 0 [2025-09-24 04:00:45.643] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:00:45.659] Read Success [2025-09-24 04:00:45.659] Verifying certificate... [2025-09-24 04:00:45.963] Verified OK [2025-09-24 04:00:45.963] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:00:47.653] Verified OK [2025-09-24 04:00:47.653] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:00:48.229] Verified OK [2025-09-24 04:00:48.229] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:00:50.787] fs.protected_hardlinks = 1 [2025-09-24 04:00:50.787] fs.protected_symlinks = 1 [2025-09-24 04:00:50.803] kernel.modules_disabled = 1 [2025-09-24 04:00:50.995] [2025-09-24 04:00:50.995] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:00:52.315] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:01:00.096] SBL1:1210.0.1.0 [2025-09-24 04:01:00.144] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:01:01.710] SBL2:1210.0.1.0 [2025-09-24 04:01:01.759] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:01:01.855] j-A [2025-09-24 04:01:09.209] The R5 Autosar Classic is running [2025-09-24 04:01:09.234] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:01:09.234] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:01:09.841] INIT: version 2.96 booting [2025-09-24 04:01:09.954] INIT: Entering runlevel: 5 [2025-09-24 04:01:10.097] mtd24 attached [2025-09-24 04:01:10.129] ubi0:textures is mounted. [2025-09-24 04:01:10.145] mtd28 attached [2025-09-24 04:01:10.161] mtd32 attached [2025-09-24 04:01:10.193] RTNETLINK answers: File exists [2025-09-24 04:01:10.193] ubi1:animations is mounted. [2025-09-24 04:01:10.217] ubi2:dml_code is mounted. [2025-09-24 04:01:10.217] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:01:10.217] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:01:10.251] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:01:10.251] data.LB_FadeInType0=100 [2025-09-24 04:01:10.251] data.CHLH_FadeInType0=0 [2025-09-24 04:01:10.251] data.WU_FadeInDelay=0 [2025-09-24 04:01:10.251] max_time_out=0 [2025-09-24 04:01:10.251] No splash screen [2025-09-24 04:01:10.251] stop dss Done [2025-09-24 04:01:10.251] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:01:10.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:01:10.321] /dev/mem opened. [2025-09-24 04:01:10.321] Memory mapped at address 0xffff8444f000. [2025-09-24 04:01:10.321] Read at address 0x00600018 (0xffff8444f018): 0x00000000 [2025-09-24 04:01:10.321] Write at address 0x00600018 (0xffff8444f018): 0x00400040, readback 0x00400040 [2025-09-24 04:01:10.321] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:01:10.321] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:01:10.417] Loaded PowerVR consumer services. [2025-09-24 04:01:10.587] Waiting data available... [2025-09-24 04:01:10.587] 512+0 records in [2025-09-24 04:01:10.587] 512+0 records out [2025-09-24 04:01:10.603] Starting syslogd/klogd: done [2025-09-24 04:01:10.619] DML Start [2025-09-24 04:01:10.794] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:01:11.034] DML res1: 0 [2025-09-24 04:01:11.462] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:01:11.462] Read Success [2025-09-24 04:01:11.462] Verifying certificate... [2025-09-24 04:01:11.702] Verified OK [2025-09-24 04:01:11.718] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:01:13.285] Verified OK [2025-09-24 04:01:13.285] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:01:13.996] Verified OK [2025-09-24 04:01:13.996] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:01:16.666] fs.protected_hardlinks = 1 [2025-09-24 04:01:16.694] fs.protected_symlinks = 1 [2025-09-24 04:01:16.694] kernel.modules_disabled = 1 [2025-09-24 04:01:16.869] [2025-09-24 04:01:16.885] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:01:18.106] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:01:25.911] SBL1:1210.0.1.0 [2025-09-24 04:01:25.959] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:01:27.525] SBL2:1210.0.1.0 [2025-09-24 04:01:27.573] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:01:27.669] j-A [2025-09-24 04:01:35.024] The R5 Autosar Classic is running [2025-09-24 04:01:35.024] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:01:35.046] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:01:35.653] INIT: version 2.96 booting [2025-09-24 04:01:35.764] INIT: Entering runlevel: 5 [2025-09-24 04:01:35.925] mtd32 attached [2025-09-24 04:01:35.925] mtd24 attached [2025-09-24 04:01:35.940] mtd28 attached [2025-09-24 04:01:35.988] ubi0:dml_code is mounted. [2025-09-24 04:01:35.988] RTNETLINK answers: File exists [2025-09-24 04:01:36.057] ubi1:textures is mounted. [2025-09-24 04:01:36.057] ubi2:animations is mounted. [2025-09-24 04:01:36.057] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:01:36.057] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:01:36.057] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:01:36.057] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:01:36.057] data.LB_FadeInType0=100 [2025-09-24 04:01:36.057] data.CHLH_FadeInType0=0 [2025-09-24 04:01:36.057] data.WU_FadeInDelay=0 [2025-09-24 04:01:36.057] max_time_out=0 [2025-09-24 04:01:36.057] No splash screen [2025-09-24 04:01:36.057] stop dss Done [2025-09-24 04:01:36.057] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:01:36.105] /dev/mem opened. [2025-09-24 04:01:36.137] Memory mapped at address 0xffff932f3000. [2025-09-24 04:01:36.137] Read at address 0x00600018 (0xffff932f3018): 0x00000000 [2025-09-24 04:01:36.137] Write at address 0x00600018 (0xffff932f3018): 0x00400040, readback 0x00400040 [2025-09-24 04:01:36.169] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:01:36.184] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:01:36.248] Loaded PowerVR consumer services. [2025-09-24 04:01:36.392] Waiting data available... [2025-09-24 04:01:36.392] 512+0 records in [2025-09-24 04:01:36.408] 512+0 records out [2025-09-24 04:01:36.456] Starting syslogd/klogd: done [2025-09-24 04:01:36.472] DML Start [2025-09-24 04:01:36.680] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:01:36.871] DML res1: 0 [2025-09-24 04:01:37.287] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:01:37.309] Read Success [2025-09-24 04:01:37.309] Verifying certificate... [2025-09-24 04:01:37.580] Verified OK [2025-09-24 04:01:37.596] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:01:39.259] Verified OK [2025-09-24 04:01:39.280] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:01:39.943] Verified OK [2025-09-24 04:01:39.943] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:01:42.580] fs.protected_hardlinks = 1 [2025-09-24 04:01:42.580] fs.protected_symlinks = 1 [2025-09-24 04:01:42.580] kernel.modules_disabled = 1 [2025-09-24 04:01:42.755] [2025-09-24 04:01:42.755] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:01:43.923] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:01:51.716] SBL1:1210.0.1.0 [2025-09-24 04:01:51.764] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:01:53.331] SBL2:1210.0.1.0 [2025-09-24 04:01:53.379] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:01:53.475] j-A [2025-09-24 04:02:00.830] The R5 Autosar Classic is running [2025-09-24 04:02:00.853] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:02:00.853] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:02:01.461] INIT: version 2.96 booting [2025-09-24 04:02:01.572] INIT: Entering runlevel: 5 [2025-09-24 04:02:01.733] mtd24 attached [2025-09-24 04:02:01.749] mtd28 attached [2025-09-24 04:02:01.765] mtd32 attached [2025-09-24 04:02:01.797] RTNETLINK answers: File exists [2025-09-24 04:02:01.797] ubi0:textures is mounted. [2025-09-24 04:02:01.844] ubi1:animations is mounted. [2025-09-24 04:02:01.844] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:02:01.844] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:02:01.844] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:02:01.844] ubi2:dml_code is mounted. [2025-09-24 04:02:01.844] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:02:01.844] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:02:01.844] data.LB_FadeInType0=100 [2025-09-24 04:02:01.864] data.CHLH_FadeInType0=0 [2025-09-24 04:02:01.864] data.WU_FadeInDelay=0 [2025-09-24 04:02:01.864] max_time_out=0 [2025-09-24 04:02:01.864] No splash screen [2025-09-24 04:02:01.864] stop dss Done [2025-09-24 04:02:01.896] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:02:01.896] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:02:01.938] /dev/mem opened. [2025-09-24 04:02:01.938] Memory mapped at address 0xffffaf31a000. [2025-09-24 04:02:01.938] Read at address 0x00600018 (0xffffaf31a018): 0x00000000 [2025-09-24 04:02:01.938] Write at address 0x00600018 (0xffffaf31a018): 0x00400040, readback 0x00400040 [2025-09-24 04:02:02.066] Loaded PowerVR consumer services. [2025-09-24 04:02:02.178] Waiting data available... [2025-09-24 04:02:02.194] 512+0 records in [2025-09-24 04:02:02.194] 512+0 records out [2025-09-24 04:02:02.210] Starting syslogd/klogd: done [2025-09-24 04:02:02.226] DML Start [2025-09-24 04:02:02.418] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:02:02.643] DML res1: 0 [2025-09-24 04:02:03.102] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:02:03.102] Read Success [2025-09-24 04:02:03.102] Verifying certificate... [2025-09-24 04:02:03.341] Verified OK [2025-09-24 04:02:03.373] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:02:05.060] Verified OK [2025-09-24 04:02:05.060] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:02:05.667] Verified OK [2025-09-24 04:02:05.683] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:02:08.305] fs.protected_hardlinks = 1 [2025-09-24 04:02:08.305] fs.protected_symlinks = 1 [2025-09-24 04:02:08.321] kernel.modules_disabled = 1 [2025-09-24 04:02:08.513] [2025-09-24 04:02:08.513] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:02:09.772] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:02:17.505] SBL1:1210.0.1.0 [2025-09-24 04:02:17.553] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:02:19.121] SBL2:1210.0.1.0 [2025-09-24 04:02:19.169] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:02:19.280] j-A [2025-09-24 04:02:26.621] The R5 Autosar Classic is running [2025-09-24 04:02:26.646] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:02:26.646] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:02:27.253] INIT: version 2.96 booting [2025-09-24 04:02:27.366] INIT: Entering runlevel: 5 [2025-09-24 04:02:27.509] mtd24 attached [2025-09-24 04:02:27.525] mtd28 attached [2025-09-24 04:02:27.541] mtd32 attached [2025-09-24 04:02:27.643] ubi0:textures is mounted. [2025-09-24 04:02:27.643] ubi1:animations is mounted. [2025-09-24 04:02:27.643] RTNETLINK answers: File exists [2025-09-24 04:02:27.643] ubi2:dml_code is mounted. [2025-09-24 04:02:27.643] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:02:27.643] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:02:27.643] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:02:27.643] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:02:27.643] data.LB_FadeInType0=100 [2025-09-24 04:02:27.643] data.CHLH_FadeInType0=0 [2025-09-24 04:02:27.643] data.WU_FadeInDelay=0 [2025-09-24 04:02:27.643] max_time_out=0 [2025-09-24 04:02:27.643] No splash screen [2025-09-24 04:02:27.643] stop dss Done [2025-09-24 04:02:27.643] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:02:27.674] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:02:27.715] /dev/mem opened. [2025-09-24 04:02:27.715] Memory mapped at address 0xffff83c20000. [2025-09-24 04:02:27.715] Read at address 0x00600018 (0xffff83c20018): 0x00000000 [2025-09-24 04:02:27.715] Write at address 0x00600018 (0xffff83c20018): 0x00400040, readback 0x00400040 [2025-09-24 04:02:27.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:02:27.955] Loaded PowerVR consumer services. [2025-09-24 04:02:28.002] Waiting data available... [2025-09-24 04:02:28.018] 512+0 records in [2025-09-24 04:02:28.018] 512+0 records out [2025-09-24 04:02:28.067] Starting syslogd/klogd: done [2025-09-24 04:02:28.083] DML Start [2025-09-24 04:02:28.259] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:02:28.498] DML res1: 0 [2025-09-24 04:02:28.873] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:02:28.873] Read Success [2025-09-24 04:02:28.873] Verifying certificate... [2025-09-24 04:02:29.113] Verified OK [2025-09-24 04:02:29.145] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:02:30.872] Verified OK [2025-09-24 04:02:30.872] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:02:31.502] Verified OK [2025-09-24 04:02:31.502] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:02:33.964] fs.protected_hardlinks = 1 [2025-09-24 04:02:33.980] fs.protected_symlinks = 1 [2025-09-24 04:02:33.980] kernel.modules_disabled = 1 [2025-09-24 04:02:34.171] [2025-09-24 04:02:34.171] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:02:35.576] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:02:43.295] SBL1:1210.0.1.0 [2025-09-24 04:02:43.343] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:02:44.911] SBL2:1210.0.1.0 [2025-09-24 04:02:44.959] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:02:45.054] j-A [2025-09-24 04:02:52.411] The R5 Autosar Classic is running [2025-09-24 04:02:52.434] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:02:52.434] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:02:53.041] INIT: version 2.96 booting [2025-09-24 04:02:53.154] INIT: Entering runlevel: 5 [2025-09-24 04:02:53.314] mtd28 attached [2025-09-24 04:02:53.330] mtd24 attached [2025-09-24 04:02:53.345] mtd32 attached [2025-09-24 04:02:53.378] ubi0:animations is mounted. [2025-09-24 04:02:53.394] RTNETLINK answers: File exists [2025-09-24 04:02:53.394] ubi2:dml_code is mounted. [2025-09-24 04:02:53.451] ubi1:textures is mounted. [2025-09-24 04:02:53.451] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:02:53.451] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:02:53.451] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:02:53.451] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:02:53.451] data.LB_FadeInType0=100 [2025-09-24 04:02:53.451] data.CHLH_FadeInType0=0 [2025-09-24 04:02:53.451] data.WU_FadeInDelay=0 [2025-09-24 04:02:53.451] max_time_out=0 [2025-09-24 04:02:53.451] No splash screen [2025-09-24 04:02:53.451] stop dss Done [2025-09-24 04:02:53.451] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:02:53.499] /dev/mem opened. [2025-09-24 04:02:53.536] Memory mapped at address 0xffff9ce20000. [2025-09-24 04:02:53.536] Read at address 0x00600018 (0xffff9ce20018): 0x00000000 [2025-09-24 04:02:53.536] Write at address 0x00600018 (0xffff9ce20018): 0x00400040, readback 0x00400040 [2025-09-24 04:02:53.536] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:02:53.536] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:02:53.664] Loaded PowerVR consumer services. [2025-09-24 04:02:53.792] Waiting data available... [2025-09-24 04:02:53.808] 512+0 records in [2025-09-24 04:02:53.808] 512+0 records out [2025-09-24 04:02:53.856] Starting syslogd/klogd: done [2025-09-24 04:02:53.872] DML Start [2025-09-24 04:02:54.064] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:02:54.304] DML res1: 0 [2025-09-24 04:02:54.694] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:02:54.694] Read Success [2025-09-24 04:02:54.694] Verifying certificate... [2025-09-24 04:02:54.918] Verified OK [2025-09-24 04:02:54.934] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:02:56.534] Verified OK [2025-09-24 04:02:56.534] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:02:57.201] Verified OK [2025-09-24 04:02:57.201] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:02:59.839] fs.protected_hardlinks = 1 [2025-09-24 04:02:59.854] fs.protected_symlinks = 1 [2025-09-24 04:02:59.854] kernel.modules_disabled = 1 [2025-09-24 04:03:00.063] [2025-09-24 04:03:00.063] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:03:01.374] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:03:09.109] SBL1:1210.0.1.0 [2025-09-24 04:03:09.157] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:03:10.723] SBL2:1210.0.1.0 [2025-09-24 04:03:10.771] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:03:10.867] j-A [2025-09-24 04:03:18.223] The R5 Autosar Classic is running [2025-09-24 04:03:18.223] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:03:18.244] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:03:18.851] INIT: version 2.96 booting [2025-09-24 04:03:18.964] INIT: Entering runlevel: 5 [2025-09-24 04:03:19.123] mtd32 attached [2025-09-24 04:03:19.123] mtd24 attached [2025-09-24 04:03:19.139] mtd28 attached [2025-09-24 04:03:19.187] ubi0:dml_code is mounted. [2025-09-24 04:03:19.187] RTNETLINK answers: File exists [2025-09-24 04:03:19.247] ubi2:animations is mounted. [2025-09-24 04:03:19.247] ubi1:textures is mounted. [2025-09-24 04:03:19.247] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:03:19.247] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:03:19.247] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:03:19.247] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:03:19.247] data.LB_FadeInType0=100 [2025-09-24 04:03:19.247] data.CHLH_FadeInType0=0 [2025-09-24 04:03:19.247] data.WU_FadeInDelay=0 [2025-09-24 04:03:19.247] max_time_out=0 [2025-09-24 04:03:19.247] No splash screen [2025-09-24 04:03:19.247] stop dss Done [2025-09-24 04:03:19.247] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:03:19.295] /dev/mem opened. [2025-09-24 04:03:19.333] Memory mapped at address 0xffffa0804000. [2025-09-24 04:03:19.333] Read at address 0x00600018 (0xffffa0804018): 0x00000000 [2025-09-24 04:03:19.333] Write at address 0x00600018 (0xffffa0804018): 0x00400040, readback 0x00400040 [2025-09-24 04:03:19.333] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:03:19.333] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:03:19.412] Loaded PowerVR consumer services. [2025-09-24 04:03:19.583] Waiting data available... [2025-09-24 04:03:19.583] 512+0 records in [2025-09-24 04:03:19.583] 512+0 records out [2025-09-24 04:03:19.614] Starting syslogd/klogd: done [2025-09-24 04:03:19.630] DML Start [2025-09-24 04:03:19.838] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:03:20.062] DML res1: 0 [2025-09-24 04:03:20.462] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:03:20.478] Read Success [2025-09-24 04:03:20.478] Verifying certificate... [2025-09-24 04:03:20.750] Verified OK [2025-09-24 04:03:20.765] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:03:22.600] Verified OK [2025-09-24 04:03:22.600] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:03:23.174] Verified OK [2025-09-24 04:03:23.174] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:03:25.698] fs.protected_hardlinks = 1 [2025-09-24 04:03:25.698] fs.protected_symlinks = 1 [2025-09-24 04:03:25.698] kernel.modules_disabled = 1 [2025-09-24 04:03:25.906] [2025-09-24 04:03:25.906] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:03:27.078] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:03:34.904] SBL1:1210.0.1.0 [2025-09-24 04:03:34.952] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:03:36.519] SBL2:1210.0.1.0 [2025-09-24 04:03:36.567] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:03:36.662] j-A [2025-09-24 04:03:44.017] The R5 Autosar Classic is running [2025-09-24 04:03:44.039] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:03:44.039] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:03:44.647] INIT: version 2.96 booting [2025-09-24 04:03:44.759] INIT: Entering runlevel: 5 [2025-09-24 04:03:44.918] mtd32 attached [2025-09-24 04:03:44.918] mtd24 attached [2025-09-24 04:03:44.935] mtd28 attached [2025-09-24 04:03:44.967] ubi0:dml_code is mounted. [2025-09-24 04:03:44.983] RTNETLINK answers: File exists [2025-09-24 04:03:44.983] ubi1:textures is mounted. [2025-09-24 04:03:45.041] ubi2:animations is mounted. [2025-09-24 04:03:45.041] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:03:45.041] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:03:45.041] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:03:45.041] data.LB_FadeInType0=100 [2025-09-24 04:03:45.041] data.CHLH_FadeInType0=0 [2025-09-24 04:03:45.041] data.WU_FadeInDelay=0 [2025-09-24 04:03:45.041] max_time_out=0 [2025-09-24 04:03:45.041] No splash screen [2025-09-24 04:03:45.041] stop dss Done [2025-09-24 04:03:45.041] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:03:45.041] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:03:45.133] /dev/mem opened. [2025-09-24 04:03:45.133] Memory mapped at address 0xffff87d86000. [2025-09-24 04:03:45.133] Read at address 0x00600018 (0xffff87d86018): 0x00000000 [2025-09-24 04:03:45.133] Write at address 0x00600018 (0xffff87d86018): 0x00400040, readback 0x00400040 [2025-09-24 04:03:45.133] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:03:45.133] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:03:45.196] Loaded PowerVR consumer services. [2025-09-24 04:03:45.368] Waiting data available... [2025-09-24 04:03:45.368] 512+0 records in [2025-09-24 04:03:45.368] 512+0 records out [2025-09-24 04:03:45.400] Starting syslogd/klogd: done [2025-09-24 04:03:45.416] DML Start [2025-09-24 04:03:45.576] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:03:45.815] DML res1: 0 [2025-09-24 04:03:46.305] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:03:46.305] Read Success [2025-09-24 04:03:46.305] Verifying certificate... [2025-09-24 04:03:46.529] Verified OK [2025-09-24 04:03:46.561] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:03:48.208] Verified OK [2025-09-24 04:03:48.208] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:03:48.840] Verified OK [2025-09-24 04:03:48.840] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:03:51.351] fs.protected_hardlinks = 1 [2025-09-24 04:03:51.351] fs.protected_symlinks = 1 [2025-09-24 04:03:51.366] kernel.modules_disabled = 1 [2025-09-24 04:03:51.558] [2025-09-24 04:03:51.558] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:03:52.920] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:04:00.707] SBL1:1210.0.1.0 [2025-09-24 04:04:00.739] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:04:02.322] SBL2:1210.0.1.0 [2025-09-24 04:04:02.354] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:04:02.466] j-A [2025-09-24 04:04:09.837] The R5 Autosar Classic is running [2025-09-24 04:04:09.837] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:04:09.837] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:04:10.445] INIT: version 2.96 booting [2025-09-24 04:04:10.541] INIT: Entering runlevel: 5 [2025-09-24 04:04:10.701] mtd28 attached [2025-09-24 04:04:10.717] mtd32 attached [2025-09-24 04:04:10.717] mtd24 attached [2025-09-24 04:04:10.781] RTNETLINK answers: File exists [2025-09-24 04:04:10.781] ubi0:animations is mounted. [2025-09-24 04:04:10.812] ubi1:dml_code is mounted. [2025-09-24 04:04:10.812] ubi2:textures is mounted. [2025-09-24 04:04:10.812] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:04:10.812] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:04:10.812] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:04:10.845] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:04:10.845] data.LB_FadeInType0=100 [2025-09-24 04:04:10.845] data.CHLH_FadeInType0=0 [2025-09-24 04:04:10.845] data.WU_FadeInDelay=0 [2025-09-24 04:04:10.845] max_time_out=0 [2025-09-24 04:04:10.845] No splash screen [2025-09-24 04:04:10.845] stop dss Done [2025-09-24 04:04:10.845] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:04:10.927] /dev/mem opened. [2025-09-24 04:04:10.927] Memory mapped at address 0xffffa6143000. [2025-09-24 04:04:10.927] Read at address 0x00600018 (0xffffa6143018): 0x00000000 [2025-09-24 04:04:10.927] Write at address 0x00600018 (0xffffa6143018): 0x00400040, readback 0x00400040 [2025-09-24 04:04:10.942] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:04:10.959] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:04:11.070] Loaded PowerVR consumer services. [2025-09-24 04:04:11.174] 512+0 records in [2025-09-24 04:04:11.174] 512+0 records out [2025-09-24 04:04:11.174] Waiting data available... [2025-09-24 04:04:11.206] Starting syslogd/klogd: done [2025-09-24 04:04:11.222] DML Start [2025-09-24 04:04:11.397] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:04:11.590] DML res1: 0 [2025-09-24 04:04:12.149] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:04:12.149] Read Success [2025-09-24 04:04:12.149] Verifying certificate... [2025-09-24 04:04:12.388] Verified OK [2025-09-24 04:04:12.420] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:04:13.951] Verified OK [2025-09-24 04:04:13.951] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:04:14.614] Verified OK [2025-09-24 04:04:14.614] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:04:17.253] fs.protected_hardlinks = 1 [2025-09-24 04:04:17.269] fs.protected_symlinks = 1 [2025-09-24 04:04:17.269] kernel.modules_disabled = 1 [2025-09-24 04:04:17.477] [2025-09-24 04:04:17.477] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:04:18.661] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:04:26.535] SBL1:1210.0.1.0 [2025-09-24 04:04:26.567] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:04:28.149] SBL2:1210.0.1.0 [2025-09-24 04:04:28.181] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:04:28.293] j-A [2025-09-24 04:04:35.662] The R5 Autosar Classic is running [2025-09-24 04:04:35.662] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:04:35.662] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:04:36.269] INIT: version 2.96 booting [2025-09-24 04:04:36.381] INIT: Entering runlevel: 5 [2025-09-24 04:04:36.525] mtd28 attached [2025-09-24 04:04:36.541] mtd24 attached [2025-09-24 04:04:36.557] mtd32 attached [2025-09-24 04:04:36.573] ubi0:animations is mounted. [2025-09-24 04:04:36.605] RTNETLINK answers: File exists [2025-09-24 04:04:36.657] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:04:36.657] ubi1:textures is mounted. [2025-09-24 04:04:36.657] ubi2:dml_code is mounted. [2025-09-24 04:04:36.657] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:04:36.657] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:04:36.657] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:04:36.657] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:04:36.657] data.LB_FadeInType0=100 [2025-09-24 04:04:36.657] data.CHLH_FadeInType0=0 [2025-09-24 04:04:36.657] data.WU_FadeInDelay=0 [2025-09-24 04:04:36.657] max_time_out=0 [2025-09-24 04:04:36.657] No splash screen [2025-09-24 04:04:36.657] stop dss Done [2025-09-24 04:04:36.728] /dev/mem opened. [2025-09-24 04:04:36.728] Memory mapped at address 0xffffa785c000. [2025-09-24 04:04:36.728] Read at address 0x00600018 (0xffffa785c018): 0x00000000 [2025-09-24 04:04:36.728] Write at address 0x00600018 (0xffffa785c018): 0x00400040, readback 0x00400040 [2025-09-24 04:04:36.728] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:04:36.728] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:04:36.823] Loaded PowerVR consumer services. [2025-09-24 04:04:36.992] Waiting data available... [2025-09-24 04:04:36.992] 512+0 records in [2025-09-24 04:04:36.992] 512+0 records out [2025-09-24 04:04:37.024] Starting syslogd/klogd: done [2025-09-24 04:04:37.040] DML Start [2025-09-24 04:04:37.216] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:04:37.440] DML res1: 0 [2025-09-24 04:04:37.871] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:04:37.892] Read Success [2025-09-24 04:04:37.892] Verifying certificate... [2025-09-24 04:04:38.180] Verified OK [2025-09-24 04:04:38.196] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:04:39.754] Verified OK [2025-09-24 04:04:39.754] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:04:40.379] Verified OK [2025-09-24 04:04:40.379] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:04:43.097] fs.protected_hardlinks = 1 [2025-09-24 04:04:43.097] fs.protected_symlinks = 1 [2025-09-24 04:04:43.113] kernel.modules_disabled = 1 [2025-09-24 04:04:43.305] [2025-09-24 04:04:43.305] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:04:44.476] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:04:52.323] SBL1:1210.0.1.0 [2025-09-24 04:04:52.371] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:04:53.937] SBL2:1210.0.1.0 [2025-09-24 04:04:53.985] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:04:54.082] j-A [2025-09-24 04:05:01.436] The R5 Autosar Classic is running [2025-09-24 04:05:01.461] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:05:01.461] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:05:02.068] INIT: version 2.96 booting [2025-09-24 04:05:02.180] INIT: Entering runlevel: 5 [2025-09-24 04:05:02.340] mtd32 attached [2025-09-24 04:05:02.340] mtd24 attached [2025-09-24 04:05:02.356] mtd28 attached [2025-09-24 04:05:02.404] RTNETLINK answers: File exists [2025-09-24 04:05:02.469] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:05:02.469] ubi0:dml_code is mounted. [2025-09-24 04:05:02.469] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:05:02.469] ubi1:textures is mounted. [2025-09-24 04:05:02.469] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:05:02.469] ubi2:animations is mounted. [2025-09-24 04:05:02.469] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:05:02.469] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:05:02.469] data.LB_FadeInType0=100 [2025-09-24 04:05:02.469] data.CHLH_FadeInType0=0 [2025-09-24 04:05:02.469] data.WU_FadeInDelay=0 [2025-09-24 04:05:02.469] max_time_out=0 [2025-09-24 04:05:02.469] No splash screen [2025-09-24 04:05:02.469] stop dss Done [2025-09-24 04:05:02.501] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:05:02.540] /dev/mem opened. [2025-09-24 04:05:02.540] Memory mapped at address 0xffff9ae57000. [2025-09-24 04:05:02.540] Read at address 0x00600018 (0xffff9ae57018): 0x00000000 [2025-09-24 04:05:02.540] Write at address 0x00600018 (0xffff9ae57018): 0x00400040, readback 0x00400040 [2025-09-24 04:05:02.540] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:05:02.684] Loaded PowerVR consumer services. [2025-09-24 04:05:02.796] Waiting data available... [2025-09-24 04:05:02.812] 512+0 records in [2025-09-24 04:05:02.812] 512+0 records out [2025-09-24 04:05:02.844] Starting syslogd/klogd: done [2025-09-24 04:05:02.860] DML Start [2025-09-24 04:05:03.035] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:05:03.259] DML res1: 0 [2025-09-24 04:05:03.748] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:05:03.748] Read Success [2025-09-24 04:05:03.748] Verifying certificate... [2025-09-24 04:05:04.020] Verified OK [2025-09-24 04:05:04.036] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:05:05.641] Verified OK [2025-09-24 04:05:05.641] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:05:06.296] Verified OK [2025-09-24 04:05:06.296] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:05:08.979] fs.protected_hardlinks = 1 [2025-09-24 04:05:08.979] fs.protected_symlinks = 1 [2025-09-24 04:05:08.979] kernel.modules_disabled = 1 [2025-09-24 04:05:09.187] [2025-09-24 04:05:09.187] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:05:10.369] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:05:18.125] SBL1:1210.0.1.0 [2025-09-24 04:05:18.173] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:05:19.740] SBL2:1210.0.1.0 [2025-09-24 04:05:19.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:05:19.884] j-A [2025-09-24 04:05:27.239] The R5 Autosar Classic is running [2025-09-24 04:05:27.262] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:05:27.262] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:05:27.869] INIT: version 2.96 booting [2025-09-24 04:05:27.981] INIT: Entering runlevel: 5 [2025-09-24 04:05:28.142] mtd24 attached [2025-09-24 04:05:28.142] mtd32 attached [2025-09-24 04:05:28.157] mtd28 attached [2025-09-24 04:05:28.205] ubi0:textures is mounted. [2025-09-24 04:05:28.251] RTNETLINK answers: File exists [2025-09-24 04:05:28.251] ubi2:animations is mounted. [2025-09-24 04:05:28.251] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:05:28.251] ubi1:dml_code is mounted. [2025-09-24 04:05:28.251] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:05:28.251] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:05:28.251] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:05:28.279] data.LB_FadeInType0=100 [2025-09-24 04:05:28.279] data.CHLH_FadeInType0=0 [2025-09-24 04:05:28.279] data.WU_FadeInDelay=0 [2025-09-24 04:05:28.279] max_time_out=0 [2025-09-24 04:05:28.279] No splash screen [2025-09-24 04:05:28.279] stop dss Done [2025-09-24 04:05:28.279] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:05:28.326] /dev/mem opened. [2025-09-24 04:05:28.360] Memory mapped at address 0xffff951eb000. [2025-09-24 04:05:28.360] Read at address 0x00600018 (0xffff951eb018): 0x00000000 [2025-09-24 04:05:28.360] Write at address 0x00600018 (0xffff951eb018): 0x00400040, readback 0x00400040 [2025-09-24 04:05:28.389] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:05:28.389] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:05:28.581] Loaded PowerVR consumer services. [2025-09-24 04:05:28.635] Waiting data available... [2025-09-24 04:05:28.635] 512+0 records in [2025-09-24 04:05:28.635] 512+0 records out [2025-09-24 04:05:28.667] Starting syslogd/klogd: done [2025-09-24 04:05:28.684] DML Start [2025-09-24 04:05:28.876] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:05:29.100] DML res1: 0 [2025-09-24 04:05:29.499] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:05:29.520] Read Success [2025-09-24 04:05:29.520] Verifying certificate... [2025-09-24 04:05:29.744] Verified OK [2025-09-24 04:05:29.760] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:05:31.454] Verified OK [2025-09-24 04:05:31.454] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:05:32.070] Verified OK [2025-09-24 04:05:32.070] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:05:34.612] fs.protected_hardlinks = 1 [2025-09-24 04:05:34.612] fs.protected_symlinks = 1 [2025-09-24 04:05:34.628] kernel.modules_disabled = 1 [2025-09-24 04:05:34.835] [2025-09-24 04:05:34.835] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:05:36.176] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:05:43.923] SBL1:1210.0.1.0 [2025-09-24 04:05:43.971] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:05:45.538] SBL2:1210.0.1.0 [2025-09-24 04:05:45.586] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:05:45.682] j-A [2025-09-24 04:05:53.037] The R5 Autosar Classic is running [2025-09-24 04:05:53.062] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:05:53.062] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:05:53.669] INIT: version 2.96 booting [2025-09-24 04:05:53.781] INIT: Entering runlevel: 5 [2025-09-24 04:05:53.941] mtd32 attached [2025-09-24 04:05:53.941] mtd24 attached [2025-09-24 04:05:53.957] mtd28 attached [2025-09-24 04:05:54.004] ubi0:dml_code is mounted. [2025-09-24 04:05:54.004] RTNETLINK answers: File exists [2025-09-24 04:05:54.051] ubi1:textures is mounted. [2025-09-24 04:05:54.051] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:05:54.051] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:05:54.051] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:05:54.051] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:05:54.051] ubi2:animations is mounted. [2025-09-24 04:05:54.051] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:05:54.078] data.LB_FadeInType0=100 [2025-09-24 04:05:54.078] data.CHLH_FadeInType0=0 [2025-09-24 04:05:54.078] data.WU_FadeInDelay=0 [2025-09-24 04:05:54.078] max_time_out=0 [2025-09-24 04:05:54.078] No splash screen [2025-09-24 04:05:54.078] stop dss Done [2025-09-24 04:05:54.105] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:05:54.105] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:05:54.122] /dev/mem opened. [2025-09-24 04:05:54.122] Memory mapped at address 0xffff9164a000. [2025-09-24 04:05:54.148] Read at address 0x00600018 (0xffff9164a018): 0x00000000 [2025-09-24 04:05:54.148] Write at address 0x00600018 (0xffff9164a018): 0x00400040, readback 0x00400040 [2025-09-24 04:05:54.228] Loaded PowerVR consumer services. [2025-09-24 04:05:54.404] Waiting data available... [2025-09-24 04:05:54.404] 512+0 records in [2025-09-24 04:05:54.404] 512+0 records out [2025-09-24 04:05:54.436] Starting syslogd/klogd: done [2025-09-24 04:05:54.452] DML Start [2025-09-24 04:05:54.643] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:05:54.883] DML res1: 0 [2025-09-24 04:05:55.277] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:05:55.277] Read Success [2025-09-24 04:05:55.277] Verifying certificate... [2025-09-24 04:05:55.566] Verified OK [2025-09-24 04:05:55.598] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:05:57.307] Verified OK [2025-09-24 04:05:57.307] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:05:57.927] Verified OK [2025-09-24 04:05:57.927] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:06:00.501] fs.protected_hardlinks = 1 [2025-09-24 04:06:00.501] fs.protected_symlinks = 1 [2025-09-24 04:06:00.517] kernel.modules_disabled = 1 [2025-09-24 04:06:00.709] [2025-09-24 04:06:00.709] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:06:01.928] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:06:09.753] SBL1:1210.0.1.0 [2025-09-24 04:06:09.801] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:06:11.367] SBL2:1210.0.1.0 [2025-09-24 04:06:11.415] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:06:11.511] j-A [2025-09-24 04:06:18.868] The R5 Autosar Classic is running [2025-09-24 04:06:18.891] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:06:18.891] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:06:19.498] INIT: version 2.96 booting [2025-09-24 04:06:19.611] INIT: Entering runlevel: 5 [2025-09-24 04:06:19.770] mtd28 attached [2025-09-24 04:06:19.770] mtd24 attached [2025-09-24 04:06:19.787] mtd32 attached [2025-09-24 04:06:19.835] RTNETLINK answers: File exists [2025-09-24 04:06:19.893] ubi0:animations is mounted. [2025-09-24 04:06:19.893] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:06:19.893] ubi1:textures is mounted. [2025-09-24 04:06:19.893] ubi2:dml_code is mounted. [2025-09-24 04:06:19.893] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:06:19.893] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:06:19.893] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:06:19.893] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:06:19.893] data.LB_FadeInType0=100 [2025-09-24 04:06:19.893] data.CHLH_FadeInType0=0 [2025-09-24 04:06:19.893] data.WU_FadeInDelay=0 [2025-09-24 04:06:19.893] max_time_out=0 [2025-09-24 04:06:19.893] No splash screen [2025-09-24 04:06:19.893] stop dss Done [2025-09-24 04:06:19.941] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:06:19.941] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:06:19.977] /dev/mem opened. [2025-09-24 04:06:19.977] Memory mapped at address 0xffff9671d000. [2025-09-24 04:06:19.977] Read at address 0x00600018 (0xffff9671d018): 0x00000000 [2025-09-24 04:06:19.977] Write at address 0x00600018 (0xffff9671d018): 0x00400040, readback 0x00400040 [2025-09-24 04:06:20.201] Loaded PowerVR consumer services. [2025-09-24 04:06:20.249] 512+0 records in [2025-09-24 04:06:20.249] 512+0 records out [2025-09-24 04:06:20.249] Waiting data available... [2025-09-24 04:06:20.281] Starting syslogd/klogd: done [2025-09-24 04:06:20.297] DML Start [2025-09-24 04:06:20.473] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:06:20.665] DML res1: 0 [2025-09-24 04:06:21.123] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:06:21.123] Read Success [2025-09-24 04:06:21.123] Verifying certificate... [2025-09-24 04:06:21.411] Verified OK [2025-09-24 04:06:21.427] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:06:23.147] Verified OK [2025-09-24 04:06:23.147] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:06:23.738] Verified OK [2025-09-24 04:06:23.754] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:06:26.439] fs.protected_hardlinks = 1 [2025-09-24 04:06:26.439] fs.protected_symlinks = 1 [2025-09-24 04:06:26.456] kernel.modules_disabled = 1 [2025-09-24 04:06:26.647] [2025-09-24 04:06:26.647] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:06:27.727] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:06:35.558] SBL1:1210.0.1.0 [2025-09-24 04:06:35.606] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:06:37.188] SBL2:1210.0.1.0 [2025-09-24 04:06:37.220] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:06:37.333] j-A [2025-09-24 04:06:44.672] The R5 Autosar Classic is running [2025-09-24 04:06:44.703] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:06:44.703] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:06:45.311] INIT: version 2.96 booting [2025-09-24 04:06:45.423] INIT: Entering runlevel: 5 [2025-09-24 04:06:45.583] mtd32 attached [2025-09-24 04:06:45.583] mtd24 attached [2025-09-24 04:06:45.599] mtd28 attached [2025-09-24 04:06:45.615] ubi0:dml_code is mounted. [2025-09-24 04:06:45.647] RTNETLINK answers: File exists [2025-09-24 04:06:45.684] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:06:45.684] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:06:45.684] ubi1:textures is mounted. [2025-09-24 04:06:45.684] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:06:45.684] ubi2:animations is mounted. [2025-09-24 04:06:45.684] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:06:45.684] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:06:45.713] data.LB_FadeInType0=100 [2025-09-24 04:06:45.713] data.CHLH_FadeInType0=0 [2025-09-24 04:06:45.713] data.WU_FadeInDelay=0 [2025-09-24 04:06:45.713] max_time_out=0 [2025-09-24 04:06:45.713] No splash screen [2025-09-24 04:06:45.713] stop dss Done [2025-09-24 04:06:45.729] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:06:45.761] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:06:45.798] /dev/mem opened. [2025-09-24 04:06:45.798] Memory mapped at address 0xffffa15fd000. [2025-09-24 04:06:45.798] Read at address 0x00600018 (0xffffa15fd018): 0x00000000 [2025-09-24 04:06:45.798] Write at address 0x00600018 (0xffffa15fd018): 0x00400040, readback 0x00400040 [2025-09-24 04:06:45.862] Loaded PowerVR consumer services. [2025-09-24 04:06:46.022] Waiting data available... [2025-09-24 04:06:46.038] 512+0 records in [2025-09-24 04:06:46.038] 512+0 records out [2025-09-24 04:06:46.070] Starting syslogd/klogd: done [2025-09-24 04:06:46.086] DML Start [2025-09-24 04:06:46.277] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:06:46.501] DML res1: 0 [2025-09-24 04:06:46.916] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:06:46.932] Read Success [2025-09-24 04:06:46.932] Verifying certificate... [2025-09-24 04:06:47.204] Verified OK [2025-09-24 04:06:47.220] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:06:48.897] Verified OK [2025-09-24 04:06:48.897] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:06:49.456] Verified OK [2025-09-24 04:06:49.472] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:06:52.190] fs.protected_hardlinks = 1 [2025-09-24 04:06:52.206] fs.protected_symlinks = 1 [2025-09-24 04:06:52.206] kernel.modules_disabled = 1 [2025-09-24 04:06:52.413] [2025-09-24 04:06:52.413] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:06:53.565] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:07:01.378] SBL1:1210.0.1.0 [2025-09-24 04:07:01.426] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:07:02.993] SBL2:1210.0.1.0 [2025-09-24 04:07:03.024] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:07:03.136] j-A [2025-09-24 04:07:10.513] The R5 Autosar Classic is running [2025-09-24 04:07:10.513] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:07:10.513] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:07:11.121] INIT: version 2.96 booting [2025-09-24 04:07:11.233] INIT: Entering runlevel: 5 [2025-09-24 04:07:11.393] mtd24 attached [2025-09-24 04:07:11.409] mtd32 attached [2025-09-24 04:07:11.425] mtd28 attached [2025-09-24 04:07:11.425] ubi0:textures is mounted. [2025-09-24 04:07:11.457] RTNETLINK answers: File exists [2025-09-24 04:07:11.524] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:07:11.524] ubi1:dml_code is mounted. [2025-09-24 04:07:11.524] ubi2:animations is mounted. [2025-09-24 04:07:11.524] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:07:11.524] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:07:11.524] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:07:11.524] data.LB_FadeInType0=100 [2025-09-24 04:07:11.524] data.CHLH_FadeInType0=0 [2025-09-24 04:07:11.524] data.WU_FadeInDelay=0 [2025-09-24 04:07:11.524] max_time_out=0 [2025-09-24 04:07:11.524] No splash screen [2025-09-24 04:07:11.524] stop dss Done [2025-09-24 04:07:11.524] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:07:11.540] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:07:11.585] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:07:11.585] /dev/mem opened. [2025-09-24 04:07:11.585] Memory mapped at address 0xffff8f612000. [2025-09-24 04:07:11.585] Read at address 0x00600018 (0xffff8f612018): 0x00000000 [2025-09-24 04:07:11.585] Write at address 0x00600018 (0xffff8f612018): 0x00400040, readback 0x00400040 [2025-09-24 04:07:11.697] Loaded PowerVR consumer services. [2025-09-24 04:07:11.840] Waiting data available... [2025-09-24 04:07:11.856] 512+0 records in [2025-09-24 04:07:11.856] 512+0 records out [2025-09-24 04:07:11.889] Starting syslogd/klogd: done [2025-09-24 04:07:11.905] DML Start [2025-09-24 04:07:12.097] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:07:12.320] DML res1: 0 [2025-09-24 04:07:12.735] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:07:12.735] Read Success [2025-09-24 04:07:12.735] Verifying certificate... [2025-09-24 04:07:13.023] Verified OK [2025-09-24 04:07:13.039] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:07:14.639] Verified OK [2025-09-24 04:07:14.639] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:07:15.307] Verified OK [2025-09-24 04:07:15.307] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:07:17.864] fs.protected_hardlinks = 1 [2025-09-24 04:07:17.864] fs.protected_symlinks = 1 [2025-09-24 04:07:17.880] kernel.modules_disabled = 1 [2025-09-24 04:07:18.073] [2025-09-24 04:07:18.073] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:07:19.355] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:07:27.249] SBL1:1210.0.1.0 [2025-09-24 04:07:27.297] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:07:28.880] SBL2:1210.0.1.0 [2025-09-24 04:07:28.912] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:07:29.024] j-A [2025-09-24 04:07:36.364] The R5 Autosar Classic is running [2025-09-24 04:07:36.389] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:07:36.389] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:07:36.996] INIT: version 2.96 booting [2025-09-24 04:07:37.108] INIT: Entering runlevel: 5 [2025-09-24 04:07:37.268] mtd24 attached [2025-09-24 04:07:37.268] mtd28 attached [2025-09-24 04:07:37.300] mtd32 attached [2025-09-24 04:07:37.316] ubi0:textures is mounted. [2025-09-24 04:07:37.332] RTNETLINK answers: File exists [2025-09-24 04:07:37.332] ubi1:animations is mounted. [2025-09-24 04:07:37.391] ubi2:dml_code is mounted. [2025-09-24 04:07:37.391] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:07:37.391] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:07:37.391] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:07:37.391] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:07:37.391] data.LB_FadeInType0=100 [2025-09-24 04:07:37.391] data.CHLH_FadeInType0=0 [2025-09-24 04:07:37.391] data.WU_FadeInDelay=0 [2025-09-24 04:07:37.391] max_time_out=0 [2025-09-24 04:07:37.391] No splash screen [2025-09-24 04:07:37.391] stop dss Done [2025-09-24 04:07:37.391] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:07:37.438] /dev/mem opened. [2025-09-24 04:07:37.438] Memory mapped at address 0xffffb0733000. [2025-09-24 04:07:37.464] Read at address 0x00600018 (0xffffb0733018): 0x00000000 [2025-09-24 04:07:37.464] Write at address 0x00600018 (0xffffb0733018): 0x00400040, readback 0x00400040 [2025-09-24 04:07:37.480] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:07:37.513] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:07:37.625] Loaded PowerVR consumer services. [2025-09-24 04:07:37.721] Waiting data available... [2025-09-24 04:07:37.736] 512+0 records in [2025-09-24 04:07:37.736] 512+0 records out [2025-09-24 04:07:37.768] Starting syslogd/klogd: done [2025-09-24 04:07:37.800] DML Start [2025-09-24 04:07:37.976] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:07:38.200] DML res1: 0 [2025-09-24 04:07:38.641] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:07:38.641] Read Success [2025-09-24 04:07:38.641] Verifying certificate... [2025-09-24 04:07:38.897] Verified OK [2025-09-24 04:07:38.913] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:07:40.582] Verified OK [2025-09-24 04:07:40.582] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:07:41.139] Verified OK [2025-09-24 04:07:41.139] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:07:43.793] fs.protected_hardlinks = 1 [2025-09-24 04:07:43.809] fs.protected_symlinks = 1 [2025-09-24 04:07:43.809] kernel.modules_disabled = 1 [2025-09-24 04:07:44.001] [2025-09-24 04:07:44.001] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:07:45.217] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:07:53.051] SBL1:1210.0.1.0 [2025-09-24 04:07:53.099] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:07:54.666] SBL2:1210.0.1.0 [2025-09-24 04:07:54.698] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:07:54.810] j-A [2025-09-24 04:08:02.164] The R5 Autosar Classic is running [2025-09-24 04:08:02.164] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:08:02.185] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:08:02.793] INIT: version 2.96 booting [2025-09-24 04:08:02.905] INIT: Entering runlevel: 5 [2025-09-24 04:08:03.049] mtd32 attached [2025-09-24 04:08:03.064] mtd24 attached [2025-09-24 04:08:03.080] mtd28 attached [2025-09-24 04:08:03.184] RTNETLINK answers: File exists [2025-09-24 04:08:03.184] ubi0:dml_code is mounted. [2025-09-24 04:08:03.184] ubi1:textures is mounted. [2025-09-24 04:08:03.184] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:08:03.184] ubi2:animations is mounted. [2025-09-24 04:08:03.184] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:08:03.184] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:08:03.184] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:08:03.184] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:08:03.184] data.LB_FadeInType0=100 [2025-09-24 04:08:03.184] data.CHLH_FadeInType0=0 [2025-09-24 04:08:03.184] data.WU_FadeInDelay=0 [2025-09-24 04:08:03.184] max_time_out=0 [2025-09-24 04:08:03.184] No splash screen [2025-09-24 04:08:03.184] stop dss Done [2025-09-24 04:08:03.253] /dev/mem opened. [2025-09-24 04:08:03.253] Memory mapped at address 0xffff9301c000. [2025-09-24 04:08:03.253] Read at address 0x00600018 (0xffff9301c018): 0x00000000 [2025-09-24 04:08:03.253] Write at address 0x00600018 (0xffff9301c018): 0x00400040, readback 0x00400040 [2025-09-24 04:08:03.313] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:08:03.313] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:08:03.392] Loaded PowerVR consumer services. [2025-09-24 04:08:03.531] Waiting data available... [2025-09-24 04:08:03.531] 512+0 records in [2025-09-24 04:08:03.531] 512+0 records out [2025-09-24 04:08:03.547] Starting syslogd/klogd: done [2025-09-24 04:08:03.563] DML Start [2025-09-24 04:08:03.740] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:08:03.979] DML res1: 0 [2025-09-24 04:08:04.363] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:08:04.379] Read Success [2025-09-24 04:08:04.379] Verifying certificate... [2025-09-24 04:08:04.603] Verified OK [2025-09-24 04:08:04.619] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:08:06.194] Verified OK [2025-09-24 04:08:06.194] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:08:06.857] Verified OK [2025-09-24 04:08:06.857] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:08:09.527] fs.protected_hardlinks = 1 [2025-09-24 04:08:09.543] fs.protected_symlinks = 1 [2025-09-24 04:08:09.543] kernel.modules_disabled = 1 [2025-09-24 04:08:09.735] [2025-09-24 04:08:09.735] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:08:11.069] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:08:18.868] SBL1:1210.0.1.0 [2025-09-24 04:08:18.900] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:08:20.483] SBL2:1210.0.1.0 [2025-09-24 04:08:20.514] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:08:20.626] j-A [2025-09-24 04:08:28.001] The R5 Autosar Classic is running [2025-09-24 04:08:28.001] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:08:28.001] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:08:28.608] INIT: version 2.96 booting [2025-09-24 04:08:28.704] INIT: Entering runlevel: 5 [2025-09-24 04:08:28.864] mtd28 attached [2025-09-24 04:08:28.880] mtd32 attached [2025-09-24 04:08:28.896] mtd24 attached [2025-09-24 04:08:28.912] ubi0:animations is mounted. [2025-09-24 04:08:28.944] RTNETLINK answers: File exists [2025-09-24 04:08:29.003] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:08:29.003] ubi2:textures is mounted. [2025-09-24 04:08:29.003] ubi1:dml_code is mounted. [2025-09-24 04:08:29.003] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:08:29.003] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:08:29.003] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:08:29.003] data.LB_FadeInType0=100 [2025-09-24 04:08:29.003] data.CHLH_FadeInType0=0 [2025-09-24 04:08:29.003] data.WU_FadeInDelay=0 [2025-09-24 04:08:29.003] max_time_out=0 [2025-09-24 04:08:29.003] No splash screen [2025-09-24 04:08:29.003] stop dss Done [2025-09-24 04:08:29.003] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:08:29.076] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:08:29.076] /dev/mem opened. [2025-09-24 04:08:29.076] Memory mapped at address 0xffff8e9d8000. [2025-09-24 04:08:29.076] Read at address 0x00600018 (0xffff8e9d8018): 0x00000000 [2025-09-24 04:08:29.076] Write at address 0x00600018 (0xffff8e9d8018): 0x00400040, readback 0x00400040 [2025-09-24 04:08:29.076] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:08:29.330] Loaded PowerVR consumer services. [2025-09-24 04:08:29.330] Waiting data available... [2025-09-24 04:08:29.346] 512+0 records in [2025-09-24 04:08:29.346] 512+0 records out [2025-09-24 04:08:29.378] Starting syslogd/klogd: done [2025-09-24 04:08:29.410] DML Start [2025-09-24 04:08:29.570] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:08:29.810] DML res1: 0 [2025-09-24 04:08:30.271] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:08:30.271] Read Success [2025-09-24 04:08:30.271] Verifying certificate... [2025-09-24 04:08:30.494] Verified OK [2025-09-24 04:08:30.511] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:08:32.029] Verified OK [2025-09-24 04:08:32.029] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:08:32.653] Verified OK [2025-09-24 04:08:32.653] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:08:35.388] fs.protected_hardlinks = 1 [2025-09-24 04:08:35.404] fs.protected_symlinks = 1 [2025-09-24 04:08:35.404] kernel.modules_disabled = 1 [2025-09-24 04:08:35.596] [2025-09-24 04:08:35.596] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:08:36.831] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:08:44.660] SBL1:1210.0.1.0 [2025-09-24 04:08:44.708] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:08:46.275] SBL2:1210.0.1.0 [2025-09-24 04:08:46.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:08:46.434] j-A [2025-09-24 04:08:53.773] The R5 Autosar Classic is running [2025-09-24 04:08:53.804] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:08:53.804] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:08:54.411] INIT: version 2.96 booting [2025-09-24 04:08:54.507] INIT: Entering runlevel: 5 [2025-09-24 04:08:54.667] mtd24 attached [2025-09-24 04:08:54.683] mtd28 attached [2025-09-24 04:08:54.699] mtd32 attached [2025-09-24 04:08:54.715] ubi0:textures is mounted. [2025-09-24 04:08:54.747] ubi1:animations is mounted. [2025-09-24 04:08:54.747] RTNETLINK answers: File exists [2025-09-24 04:08:54.807] ubi2:dml_code is mounted. [2025-09-24 04:08:54.807] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:08:54.807] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:08:54.807] data.LB_FadeInType0=100 [2025-09-24 04:08:54.807] data.CHLH_FadeInType0=0 [2025-09-24 04:08:54.807] data.WU_FadeInDelay=0 [2025-09-24 04:08:54.807] max_time_out=0 [2025-09-24 04:08:54.807] No splash screen [2025-09-24 04:08:54.807] stop dss Done [2025-09-24 04:08:54.807] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:08:54.807] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:08:54.807] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:08:54.857] /dev/mem opened. [2025-09-24 04:08:54.857] Memory mapped at address 0xffff8f601000. [2025-09-24 04:08:54.857] Read at address 0x00600018 (0xffff8f601018): 0x00000000 [2025-09-24 04:08:54.857] Write at address 0x00600018 (0xffff8f601018): 0x00400040, readback 0x00400040 [2025-09-24 04:08:54.872] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:08:54.888] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:08:55.017] Loaded PowerVR consumer services. [2025-09-24 04:08:55.144] Waiting data available... [2025-09-24 04:08:55.160] 512+0 records in [2025-09-24 04:08:55.160] 512+0 records out [2025-09-24 04:08:55.208] Starting syslogd/klogd: done [2025-09-24 04:08:55.224] DML Start [2025-09-24 04:08:55.416] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:08:55.625] DML res1: 0 [2025-09-24 04:08:56.040] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:08:56.061] Read Success [2025-09-24 04:08:56.061] Verifying certificate... [2025-09-24 04:08:56.301] Verified OK [2025-09-24 04:08:56.316] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:08:58.019] Verified OK [2025-09-24 04:08:58.019] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:08:58.659] Verified OK [2025-09-24 04:08:58.659] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:09:01.233] fs.protected_hardlinks = 1 [2025-09-24 04:09:01.249] fs.protected_symlinks = 1 [2025-09-24 04:09:01.249] kernel.modules_disabled = 1 [2025-09-24 04:09:01.441] [2025-09-24 04:09:01.441] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:09:02.721] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:09:10.464] SBL1:1210.0.1.0 [2025-09-24 04:09:10.496] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:09:12.079] SBL2:1210.0.1.0 [2025-09-24 04:09:12.111] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:09:12.223] j-A [2025-09-24 04:09:19.595] The R5 Autosar Classic is running [2025-09-24 04:09:19.595] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:09:19.595] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:09:20.203] INIT: version 2.96 booting [2025-09-24 04:09:20.314] INIT: Entering runlevel: 5 [2025-09-24 04:09:20.474] mtd32 attached [2025-09-24 04:09:20.474] mtd24 attached [2025-09-24 04:09:20.491] mtd28 attached [2025-09-24 04:09:20.523] ubi0:dml_code is mounted. [2025-09-24 04:09:20.539] RTNETLINK answers: File exists [2025-09-24 04:09:20.609] ubi1:textures is mounted. [2025-09-24 04:09:20.609] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:09:20.609] ubi2:animations is mounted. [2025-09-24 04:09:20.609] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:09:20.609] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:09:20.609] data.LB_FadeInType0=100 [2025-09-24 04:09:20.609] data.CHLH_FadeInType0=0 [2025-09-24 04:09:20.609] data.WU_FadeInDelay=0 [2025-09-24 04:09:20.609] max_time_out=0 [2025-09-24 04:09:20.609] No splash screen [2025-09-24 04:09:20.609] stop dss Done [2025-09-24 04:09:20.609] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:09:20.609] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:09:20.656] /dev/mem opened. [2025-09-24 04:09:20.656] Memory mapped at address 0xffffa490f000. [2025-09-24 04:09:20.682] Read at address 0x00600018 (0xffffa490f018): 0x00000000 [2025-09-24 04:09:20.682] Write at address 0x00600018 (0xffffa490f018): 0x00400040, readback 0x00400040 [2025-09-24 04:09:20.745] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:09:20.745] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:09:20.825] Loaded PowerVR consumer services. [2025-09-24 04:09:20.937] 512+0 records in [2025-09-24 04:09:20.937] 512+0 records out [2025-09-24 04:09:20.953] Waiting data available... [2025-09-24 04:09:20.985] Starting syslogd/klogd: done [2025-09-24 04:09:21.001] DML Start [2025-09-24 04:09:21.177] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:09:21.368] DML res1: 0 [2025-09-24 04:09:21.895] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:09:21.895] Read Success [2025-09-24 04:09:21.895] Verifying certificate... [2025-09-24 04:09:22.134] Verified OK [2025-09-24 04:09:22.150] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:09:23.744] Verified OK [2025-09-24 04:09:23.744] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:09:24.329] Verified OK [2025-09-24 04:09:24.329] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:09:26.887] fs.protected_hardlinks = 1 [2025-09-24 04:09:26.887] fs.protected_symlinks = 1 [2025-09-24 04:09:26.903] kernel.modules_disabled = 1 [2025-09-24 04:09:27.095] [2025-09-24 04:09:27.095] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:09:28.429] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:09:36.257] SBL1:1210.0.1.0 [2025-09-24 04:09:36.305] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:09:37.872] SBL2:1210.0.1.0 [2025-09-24 04:09:37.920] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:09:38.016] j-A [2025-09-24 04:09:45.370] The R5 Autosar Classic is running [2025-09-24 04:09:45.370] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:09:45.391] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:09:45.998] INIT: version 2.96 booting [2025-09-24 04:09:46.110] INIT: Entering runlevel: 5 [2025-09-24 04:09:46.270] mtd24 attached [2025-09-24 04:09:46.270] mtd28 attached [2025-09-24 04:09:46.286] mtd32 attached [2025-09-24 04:09:46.334] ubi0:textures is mounted. [2025-09-24 04:09:46.401] RTNETLINK answers: File exists [2025-09-24 04:09:46.401] ubi1:animations is mounted. [2025-09-24 04:09:46.401] ubi2:dml_code is mounted. [2025-09-24 04:09:46.401] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:09:46.401] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:09:46.401] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:09:46.401] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:09:46.401] data.LB_FadeInType0=100 [2025-09-24 04:09:46.401] data.CHLH_FadeInType0=0 [2025-09-24 04:09:46.401] data.WU_FadeInDelay=0 [2025-09-24 04:09:46.401] max_time_out=0 [2025-09-24 04:09:46.401] No splash screen [2025-09-24 04:09:46.401] stop dss Done [2025-09-24 04:09:46.401] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:09:46.432] /dev/mem opened. [2025-09-24 04:09:46.432] Memory mapped at address 0xffffa724f000. [2025-09-24 04:09:46.480] Read at address 0x00600018 (0xffffa724f018): 0x00000000 [2025-09-24 04:09:46.480] Write at address 0x00600018 (0xffffa724f018): 0x00400040, readback 0x00400040 [2025-09-24 04:09:46.480] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:09:46.480] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:09:46.625] Loaded PowerVR consumer services. [2025-09-24 04:09:46.736] 512+0 records in [2025-09-24 04:09:46.736] 512+0 records out [2025-09-24 04:09:46.752] Waiting data available... [2025-09-24 04:09:46.784] Starting syslogd/klogd: done [2025-09-24 04:09:46.800] DML Start [2025-09-24 04:09:46.960] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:09:47.168] DML res1: 0 [2025-09-24 04:09:47.703] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:09:47.703] Read Success [2025-09-24 04:09:47.703] Verifying certificate... [2025-09-24 04:09:47.975] Verified OK [2025-09-24 04:09:47.991] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:09:49.619] Verified OK [2025-09-24 04:09:49.619] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:09:50.179] Verified OK [2025-09-24 04:09:50.179] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:09:52.689] fs.protected_hardlinks = 1 [2025-09-24 04:09:52.689] fs.protected_symlinks = 1 [2025-09-24 04:09:52.705] kernel.modules_disabled = 1 [2025-09-24 04:09:52.897] [2025-09-24 04:09:52.897] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:09:54.318] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:10:02.069] SBL1:1210.0.1.0 [2025-09-24 04:10:02.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:10:03.684] SBL2:1210.0.1.0 [2025-09-24 04:10:03.716] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:10:03.828] j-A [2025-09-24 04:10:11.203] The R5 Autosar Classic is running [2025-09-24 04:10:11.203] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:10:11.203] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:10:11.810] INIT: version 2.96 booting [2025-09-24 04:10:11.922] INIT: Entering runlevel: 5 [2025-09-24 04:10:12.066] mtd24 attached [2025-09-24 04:10:12.082] mtd32 attached [2025-09-24 04:10:12.114] ubi0:textures is mounted. [2025-09-24 04:10:12.130] mtd28 attached [2025-09-24 04:10:12.130] ubi1:dml_code is mounted. [2025-09-24 04:10:12.146] RTNETLINK answers: File exists [2025-09-24 04:10:12.190] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:10:12.190] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:10:12.190] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:10:12.190] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:10:12.190] ubi2:animations is mounted. [2025-09-24 04:10:12.190] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:10:12.237] data.LB_FadeInType0=100 [2025-09-24 04:10:12.237] data.CHLH_FadeInType0=0 [2025-09-24 04:10:12.237] data.WU_FadeInDelay=0 [2025-09-24 04:10:12.237] max_time_out=0 [2025-09-24 04:10:12.237] No splash screen [2025-09-24 04:10:12.237] stop dss Done [2025-09-24 04:10:12.237] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:10:12.237] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:10:12.295] /dev/mem opened. [2025-09-24 04:10:12.295] Memory mapped at address 0xffff9c9b8000. [2025-09-24 04:10:12.295] Read at address 0x00600018 (0xffff9c9b8018): 0x00000000 [2025-09-24 04:10:12.295] Write at address 0x00600018 (0xffff9c9b8018): 0x00400040, readback 0x00400040 [2025-09-24 04:10:12.391] Loaded PowerVR consumer services. [2025-09-24 04:10:12.535] Waiting data available... [2025-09-24 04:10:12.535] 512+0 records in [2025-09-24 04:10:12.535] 512+0 records out [2025-09-24 04:10:12.583] Starting syslogd/klogd: done [2025-09-24 04:10:12.599] DML Start [2025-09-24 04:10:12.791] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:10:13.014] DML res1: 0 [2025-09-24 04:10:13.453] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:10:13.453] Read Success [2025-09-24 04:10:13.453] Verifying certificate... [2025-09-24 04:10:13.693] Verified OK [2025-09-24 04:10:13.693] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:10:15.427] Verified OK [2025-09-24 04:10:15.427] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:10:16.080] Verified OK [2025-09-24 04:10:16.080] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:10:18.734] fs.protected_hardlinks = 1 [2025-09-24 04:10:18.734] fs.protected_symlinks = 1 [2025-09-24 04:10:18.750] kernel.modules_disabled = 1 [2025-09-24 04:10:18.958] [2025-09-24 04:10:18.958] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:10:20.125] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:10:27.872] SBL1:1210.0.1.0 [2025-09-24 04:10:27.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:10:29.487] SBL2:1210.0.1.0 [2025-09-24 04:10:29.519] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:10:29.631] j-A [2025-09-24 04:10:37.003] The R5 Autosar Classic is running [2025-09-24 04:10:37.003] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:10:37.003] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:10:37.611] INIT: version 2.96 booting [2025-09-24 04:10:37.723] INIT: Entering runlevel: 5 [2025-09-24 04:10:37.883] mtd32 attached [2025-09-24 04:10:37.899] mtd24 attached [2025-09-24 04:10:37.899] mtd28 attached [2025-09-24 04:10:37.931] ubi0:dml_code is mounted. [2025-09-24 04:10:37.947] RTNETLINK answers: File exists [2025-09-24 04:10:38.006] ubi1:textures is mounted. [2025-09-24 04:10:38.006] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:10:38.006] ubi2:animations is mounted. [2025-09-24 04:10:38.006] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:10:38.006] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:10:38.006] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:10:38.006] data.LB_FadeInType0=100 [2025-09-24 04:10:38.006] data.CHLH_FadeInType0=0 [2025-09-24 04:10:38.006] data.WU_FadeInDelay=0 [2025-09-24 04:10:38.006] max_time_out=0 [2025-09-24 04:10:38.006] No splash screen [2025-09-24 04:10:38.006] stop dss Done [2025-09-24 04:10:38.006] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:10:38.079] /dev/mem opened. [2025-09-24 04:10:38.079] Memory mapped at address 0xffff9ac57000. [2025-09-24 04:10:38.079] Read at address 0x00600018 (0xffff9ac57018): 0x00000000 [2025-09-24 04:10:38.079] Write at address 0x00600018 (0xffff9ac57018): 0x00400040, readback 0x00400040 [2025-09-24 04:10:38.079] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:10:38.079] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:10:38.223] Loaded PowerVR consumer services. [2025-09-24 04:10:38.351] Waiting data available... [2025-09-24 04:10:38.367] 512+0 records in [2025-09-24 04:10:38.367] 512+0 records out [2025-09-24 04:10:38.399] Starting syslogd/klogd: done [2025-09-24 04:10:38.415] DML Start [2025-09-24 04:10:38.575] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:10:38.767] DML res1: 0 [2025-09-24 04:10:39.278] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:10:39.299] Read Success [2025-09-24 04:10:39.299] Verifying certificate... [2025-09-24 04:10:39.587] Verified OK [2025-09-24 04:10:39.619] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:10:41.271] Verified OK [2025-09-24 04:10:41.271] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:10:41.877] Verified OK [2025-09-24 04:10:41.877] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:10:44.465] fs.protected_hardlinks = 1 [2025-09-24 04:10:44.465] fs.protected_symlinks = 1 [2025-09-24 04:10:44.465] kernel.modules_disabled = 1 [2025-09-24 04:10:44.657] [2025-09-24 04:10:44.657] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:10:45.927] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:10:53.648] SBL1:1210.0.1.0 [2025-09-24 04:10:53.696] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:10:55.263] SBL2:1210.0.1.0 [2025-09-24 04:10:55.311] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:10:55.407] j-A [2025-09-24 04:11:02.763] The R5 Autosar Classic is running [2025-09-24 04:11:02.785] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:11:02.785] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:11:03.392] INIT: version 2.96 booting [2025-09-24 04:11:03.505] INIT: Entering runlevel: 5 [2025-09-24 04:11:03.649] mtd28 attached [2025-09-24 04:11:03.665] mtd24 attached [2025-09-24 04:11:03.681] mtd32 attached [2025-09-24 04:11:03.697] ubi0:animations is mounted. [2025-09-24 04:11:03.729] RTNETLINK answers: File exists [2025-09-24 04:11:03.729] ubi1:textures is mounted. [2025-09-24 04:11:03.785] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:11:03.785] ubi2:dml_code is mounted. [2025-09-24 04:11:03.785] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:11:03.785] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:11:03.785] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:11:03.785] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:11:03.785] data.LB_FadeInType0=100 [2025-09-24 04:11:03.785] data.CHLH_FadeInType0=0 [2025-09-24 04:11:03.785] data.WU_FadeInDelay=0 [2025-09-24 04:11:03.785] max_time_out=0 [2025-09-24 04:11:03.785] No splash screen [2025-09-24 04:11:03.785] stop dss Done [2025-09-24 04:11:03.852] /dev/mem opened. [2025-09-24 04:11:03.852] Memory mapped at address 0xffffadbda000. [2025-09-24 04:11:03.852] Read at address 0x00600018 (0xffffadbda018): 0x00000000 [2025-09-24 04:11:03.852] Write at address 0x00600018 (0xffffadbda018): 0x00400040, readback 0x00400040 [2025-09-24 04:11:03.852] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:11:03.884] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:11:04.060] Loaded PowerVR consumer services. [2025-09-24 04:11:04.139] Waiting data available... [2025-09-24 04:11:04.155] 512+0 records in [2025-09-24 04:11:04.155] 512+0 records out [2025-09-24 04:11:04.187] Starting syslogd/klogd: done [2025-09-24 04:11:04.203] DML Start [2025-09-24 04:11:04.379] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:11:04.556] DML res1: 0 [2025-09-24 04:11:05.091] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:11:05.091] Read Success [2025-09-24 04:11:05.091] Verifying certificate... [2025-09-24 04:11:05.331] Verified OK [2025-09-24 04:11:05.347] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:11:07.026] Verified OK [2025-09-24 04:11:07.026] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:11:07.553] Verified OK [2025-09-24 04:11:07.553] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:11:10.031] fs.protected_hardlinks = 1 [2025-09-24 04:11:10.047] fs.protected_symlinks = 1 [2025-09-24 04:11:10.047] kernel.modules_disabled = 1 [2025-09-24 04:11:10.239] [2025-09-24 04:11:10.239] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:11:11.676] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:11:19.447] SBL1:1210.0.1.0 [2025-09-24 04:11:19.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:11:21.061] SBL2:1210.0.1.0 [2025-09-24 04:11:21.093] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:11:21.205] j-A [2025-09-24 04:11:28.581] The R5 Autosar Classic is running [2025-09-24 04:11:28.581] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:11:28.581] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:11:29.188] INIT: version 2.96 booting [2025-09-24 04:11:29.300] INIT: Entering runlevel: 5 [2025-09-24 04:11:29.460] mtd24 attached [2025-09-24 04:11:29.460] mtd28 attached [2025-09-24 04:11:29.476] mtd32 attached [2025-09-24 04:11:29.524] RTNETLINK answers: File exists [2025-09-24 04:11:29.590] ubi2:dml_code is mounted. [2025-09-24 04:11:29.590] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:11:29.590] ubi1:animations is mounted. [2025-09-24 04:11:29.590] ubi0:textures is mounted. [2025-09-24 04:11:29.590] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:11:29.590] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:11:29.590] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:11:29.590] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:11:29.590] data.LB_FadeInType0=100 [2025-09-24 04:11:29.590] data.CHLH_FadeInType0=0 [2025-09-24 04:11:29.590] data.WU_FadeInDelay=0 [2025-09-24 04:11:29.590] max_time_out=0 [2025-09-24 04:11:29.590] No splash screen [2025-09-24 04:11:29.590] stop dss Done [2025-09-24 04:11:29.622] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:11:29.638] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:11:29.670] /dev/mem opened. [2025-09-24 04:11:29.670] Memory mapped at address 0xffff87e8a000. [2025-09-24 04:11:29.670] Read at address 0x00600018 (0xffff87e8a018): 0x00000000 [2025-09-24 04:11:29.670] Write at address 0x00600018 (0xffff87e8a018): 0x00400040, readback 0x00400040 [2025-09-24 04:11:29.814] Loaded PowerVR consumer services. [2025-09-24 04:11:29.942] Waiting data available... [2025-09-24 04:11:29.942] 512+0 records in [2025-09-24 04:11:29.942] 512+0 records out [2025-09-24 04:11:29.989] Starting syslogd/klogd: done [2025-09-24 04:11:30.005] DML Start [2025-09-24 04:11:30.182] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:11:30.421] DML res1: 0 [2025-09-24 04:11:30.852] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:11:30.852] Read Success [2025-09-24 04:11:30.852] Verifying certificate... [2025-09-24 04:11:31.075] Verified OK [2025-09-24 04:11:31.091] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:11:32.770] Verified OK [2025-09-24 04:11:32.770] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:11:33.329] Verified OK [2025-09-24 04:11:33.350] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:11:35.908] fs.protected_hardlinks = 1 [2025-09-24 04:11:35.924] fs.protected_symlinks = 1 [2025-09-24 04:11:35.940] kernel.modules_disabled = 1 [2025-09-24 04:11:36.132] [2025-09-24 04:11:36.132] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:11:37.441] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:11:45.241] SBL1:1210.0.1.0 [2025-09-24 04:11:45.289] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:11:46.855] SBL2:1210.0.1.0 [2025-09-24 04:11:46.903] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:11:47.015] j-A [2025-09-24 04:11:54.355] The R5 Autosar Classic is running [2025-09-24 04:11:54.380] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:11:54.380] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:11:54.987] INIT: version 2.96 booting [2025-09-24 04:11:55.099] INIT: Entering runlevel: 5 [2025-09-24 04:11:55.260] mtd28 attached [2025-09-24 04:11:55.276] mtd24 attached [2025-09-24 04:11:55.291] mtd32 attached [2025-09-24 04:11:55.307] ubi0:animations is mounted. [2025-09-24 04:11:55.323] ubi1:textures is mounted. [2025-09-24 04:11:55.339] RTNETLINK answers: File exists [2025-09-24 04:11:55.339] ubi2:dml_code is mounted. [2025-09-24 04:11:55.395] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:11:55.395] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:11:55.395] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:11:55.395] data.LB_FadeInType0=100 [2025-09-24 04:11:55.395] data.CHLH_FadeInType0=0 [2025-09-24 04:11:55.395] data.WU_FadeInDelay=0 [2025-09-24 04:11:55.395] max_time_out=0 [2025-09-24 04:11:55.395] No splash screen [2025-09-24 04:11:55.395] stop dss Done [2025-09-24 04:11:55.395] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:11:55.395] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:11:55.427] /dev/mem opened. [2025-09-24 04:11:55.427] Memory mapped at address 0xffff8595b000. [2025-09-24 04:11:55.459] Read at address 0x00600018 (0xffff8595b018): 0x00000000 [2025-09-24 04:11:55.459] Write at address 0x00600018 (0xffff8595b018): 0x00400040, readback 0x00400040 [2025-09-24 04:11:55.459] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:11:55.459] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:11:55.587] Loaded PowerVR consumer services. [2025-09-24 04:11:55.715] Waiting data available... [2025-09-24 04:11:55.731] 512+0 records in [2025-09-24 04:11:55.731] 512+0 records out [2025-09-24 04:11:55.763] Starting syslogd/klogd: done [2025-09-24 04:11:55.779] DML Start [2025-09-24 04:11:55.987] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:11:56.195] DML res1: 0 [2025-09-24 04:11:56.588] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:11:56.588] Read Success [2025-09-24 04:11:56.588] Verifying certificate... [2025-09-24 04:11:56.844] Verified OK [2025-09-24 04:11:56.876] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:11:58.659] Verified OK [2025-09-24 04:11:58.659] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:11:59.287] Verified OK [2025-09-24 04:11:59.287] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:12:01.861] fs.protected_hardlinks = 1 [2025-09-24 04:12:01.878] fs.protected_symlinks = 1 [2025-09-24 04:12:01.878] kernel.modules_disabled = 1 [2025-09-24 04:12:02.069] [2025-09-24 04:12:02.069] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:12:03.264] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:12:11.064] SBL1:1210.0.1.0 [2025-09-24 04:12:11.095] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:12:12.679] SBL2:1210.0.1.0 [2025-09-24 04:12:12.710] OTP value is: rxDLL 23, txDLL 38, rdDelay 1 [2025-09-24 04:12:12.822] j-A [2025-09-24 04:12:20.160] The R5 Autosar Classic is running [2025-09-24 04:12:20.192] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:12:20.192] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:12:20.799] INIT: version 2.96 booting [2025-09-24 04:12:20.911] INIT: Entering runlevel: 5 [2025-09-24 04:12:21.055] mtd24 attached [2025-09-24 04:12:21.071] mtd32 attached [2025-09-24 04:12:21.087] mtd28 attached [2025-09-24 04:12:21.103] ubi0:textures is mounted. [2025-09-24 04:12:21.135] RTNETLINK answers: File exists [2025-09-24 04:12:21.135] ubi1:dml_code is mounted. [2025-09-24 04:12:21.190] ubi2:animations is mounted. [2025-09-24 04:12:21.190] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:12:21.190] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:12:21.190] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:12:21.190] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:12:21.190] data.LB_FadeInType0=100 [2025-09-24 04:12:21.190] data.CHLH_FadeInType0=0 [2025-09-24 04:12:21.190] data.WU_FadeInDelay=0 [2025-09-24 04:12:21.190] max_time_out=0 [2025-09-24 04:12:21.190] No splash screen [2025-09-24 04:12:21.190] stop dss Done [2025-09-24 04:12:21.190] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:12:21.260] /dev/mem opened. [2025-09-24 04:12:21.260] Memory mapped at address 0xffffa32b9000. [2025-09-24 04:12:21.260] Read at address 0x00600018 (0xffffa32b9018): 0x00000000 [2025-09-24 04:12:21.260] Write at address 0x00600018 (0xffffa32b9018): 0x00400040, readback 0x00400040 [2025-09-24 04:12:21.290] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:12:21.290] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:12:21.498] Loaded PowerVR consumer services. [2025-09-24 04:12:21.546] Waiting data available... [2025-09-24 04:12:21.562] 512+0 records in [2025-09-24 04:12:21.578] 512+0 records out [2025-09-24 04:12:21.593] Starting syslogd/klogd: done [2025-09-24 04:12:21.610] DML Start [2025-09-24 04:12:21.834] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:12:22.041] DML res1: 0 [2025-09-24 04:12:22.435] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:12:22.435] Read Success [2025-09-24 04:12:22.435] Verifying certificate... [2025-09-24 04:12:22.675] Verified OK [2025-09-24 04:12:22.691] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:12:24.305] Verified OK [2025-09-24 04:12:24.305] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:12:24.905] Verified OK [2025-09-24 04:12:24.905] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:12:27.640] fs.protected_hardlinks = 1 [2025-09-24 04:12:27.640] fs.protected_symlinks = 1 [2025-09-24 04:12:27.656] kernel.modules_disabled = 1 [2025-09-24 04:12:27.831] [2025-09-24 04:12:27.831] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:12:29.118] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:12:36.905] SBL1:1210.0.1.0 [2025-09-24 04:12:36.953] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:12:38.520] SBL2:1210.0.1.0 [2025-09-24 04:12:38.552] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:12:38.663] j-A [2025-09-24 04:12:46.039] The R5 Autosar Classic is running [2025-09-24 04:12:46.039] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:12:46.039] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:12:46.647] INIT: version 2.96 booting [2025-09-24 04:12:46.759] INIT: Entering runlevel: 5 [2025-09-24 04:12:46.902] mtd28 attached [2025-09-24 04:12:46.918] mtd32 attached [2025-09-24 04:12:46.918] mtd24 attached [2025-09-24 04:12:46.966] RTNETLINK answers: File exists [2025-09-24 04:12:47.033] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:12:47.033] ubi0:animations is mounted. [2025-09-24 04:12:47.033] ubi1:dml_code is mounted. [2025-09-24 04:12:47.033] ubi2:textures is mounted. [2025-09-24 04:12:47.033] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:12:47.033] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:12:47.033] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:12:47.033] data.LB_FadeInType0=100 [2025-09-24 04:12:47.033] data.CHLH_FadeInType0=0 [2025-09-24 04:12:47.033] data.WU_FadeInDelay=0 [2025-09-24 04:12:47.033] max_time_out=0 [2025-09-24 04:12:47.033] No splash screen [2025-09-24 04:12:47.033] stop dss Done [2025-09-24 04:12:47.033] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:12:47.064] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:12:47.080] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:12:47.114] /dev/mem opened. [2025-09-24 04:12:47.114] Memory mapped at address 0xffffbf0ad000. [2025-09-24 04:12:47.114] Read at address 0x00600018 (0xffffbf0ad018): 0x00000000 [2025-09-24 04:12:47.114] Write at address 0x00600018 (0xffffbf0ad018): 0x00400040, readback 0x00400040 [2025-09-24 04:12:47.194] Loaded PowerVR consumer services. [2025-09-24 04:12:47.381] Waiting data available... [2025-09-24 04:12:47.381] 512+0 records in [2025-09-24 04:12:47.381] 512+0 records out [2025-09-24 04:12:47.413] Starting syslogd/klogd: done [2025-09-24 04:12:47.445] DML Start [2025-09-24 04:12:47.573] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:12:47.781] DML res1: 0 [2025-09-24 04:12:48.260] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:12:48.281] Read Success [2025-09-24 04:12:48.281] Verifying certificate... [2025-09-24 04:12:48.537] Verified OK [2025-09-24 04:12:48.553] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:12:50.384] Verified OK [2025-09-24 04:12:50.384] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:12:50.905] Verified OK [2025-09-24 04:12:50.905] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:12:53.335] fs.protected_hardlinks = 1 [2025-09-24 04:12:53.335] fs.protected_symlinks = 1 [2025-09-24 04:12:53.335] kernel.modules_disabled = 1 [2025-09-24 04:12:53.543] [2025-09-24 04:12:53.543] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:12:54.881] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:13:02.850] SBL1:1210.0.1.0 [2025-09-24 04:13:02.898] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:13:04.464] SBL2:1210.0.1.0 [2025-09-24 04:13:04.512] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:13:04.608] j-A [2025-09-24 04:13:11.962] The R5 Autosar Classic is running [2025-09-24 04:13:11.962] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:13:11.983] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:13:12.591] INIT: version 2.96 booting [2025-09-24 04:13:12.703] INIT: Entering runlevel: 5 [2025-09-24 04:13:12.863] mtd24 attached [2025-09-24 04:13:12.863] mtd32 attached [2025-09-24 04:13:12.879] mtd28 attached [2025-09-24 04:13:12.927] RTNETLINK answers: File exists [2025-09-24 04:13:12.927] ubi0:textures is mounted. [2025-09-24 04:13:12.990] ubi2:animations is mounted. [2025-09-24 04:13:12.990] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:13:12.990] ubi1:dml_code is mounted. [2025-09-24 04:13:12.990] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:13:12.990] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:13:12.990] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:13:12.990] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:13:12.990] data.LB_FadeInType0=100 [2025-09-24 04:13:12.990] data.CHLH_FadeInType0=0 [2025-09-24 04:13:12.990] data.WU_FadeInDelay=0 [2025-09-24 04:13:12.990] max_time_out=0 [2025-09-24 04:13:12.990] No splash screen [2025-09-24 04:13:12.990] stop dss Done [2025-09-24 04:13:13.064] /dev/mem opened. [2025-09-24 04:13:13.064] Memory mapped at address 0xffffaa0ff000. [2025-09-24 04:13:13.064] Read at address 0x00600018 (0xffffaa0ff018): 0x00000000 [2025-09-24 04:13:13.064] Write at address 0x00600018 (0xffffaa0ff018): 0x00400040, readback 0x00400040 [2025-09-24 04:13:13.064] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:13:13.079] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:13:13.287] Loaded PowerVR consumer services. [2025-09-24 04:13:13.335] 512+0 records in [2025-09-24 04:13:13.335] 512+0 records out [2025-09-24 04:13:13.351] Waiting data available... [2025-09-24 04:13:13.383] Starting syslogd/klogd: done [2025-09-24 04:13:13.399] DML Start [2025-09-24 04:13:13.591] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:13:13.799] DML res1: 0 [2025-09-24 04:13:14.199] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:13:14.220] Read Success [2025-09-24 04:13:14.220] Verifying certificate... [2025-09-24 04:13:14.460] Verified OK [2025-09-24 04:13:14.476] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:13:16.186] Verified OK [2025-09-24 04:13:16.187] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:13:16.758] Verified OK [2025-09-24 04:13:16.758] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:13:19.301] fs.protected_hardlinks = 1 [2025-09-24 04:13:19.327] fs.protected_symlinks = 1 [2025-09-24 04:13:19.327] kernel.modules_disabled = 1 [2025-09-24 04:13:19.503] [2025-09-24 04:13:19.503] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:13:20.860] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:13:28.705] SBL1:1210.0.1.0 [2025-09-24 04:13:28.753] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:13:30.320] SBL2:1210.0.1.0 [2025-09-24 04:13:30.367] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:13:30.479] j-A [2025-09-24 04:13:37.819] The R5 Autosar Classic is running [2025-09-24 04:13:37.844] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:13:37.844] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:13:38.451] INIT: version 2.96 booting [2025-09-24 04:13:38.563] INIT: Entering runlevel: 5 [2025-09-24 04:13:38.723] mtd24 attached [2025-09-24 04:13:38.723] mtd28 attached [2025-09-24 04:13:38.739] mtd32 attached [2025-09-24 04:13:38.787] RTNETLINK answers: File exists [2025-09-24 04:13:38.787] ubi0:textures is mounted. [2025-09-24 04:13:38.851] ubi2:dml_code is mounted. [2025-09-24 04:13:38.851] ubi1:animations is mounted. [2025-09-24 04:13:38.851] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:13:38.851] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:13:38.851] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:13:38.851] data.LB_FadeInType0=100 [2025-09-24 04:13:38.851] data.CHLH_FadeInType0=0 [2025-09-24 04:13:38.851] data.WU_FadeInDelay=0 [2025-09-24 04:13:38.851] max_time_out=0 [2025-09-24 04:13:38.851] No splash screen [2025-09-24 04:13:38.851] stop dss Done [2025-09-24 04:13:38.851] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:13:38.851] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:13:38.918] /dev/mem opened. [2025-09-24 04:13:38.918] Memory mapped at address 0xffffbee99000. [2025-09-24 04:13:38.918] Read at address 0x00600018 (0xffffbee99018): 0x00000000 [2025-09-24 04:13:38.918] Write at address 0x00600018 (0xffffbee99018): 0x00400040, readback 0x00400040 [2025-09-24 04:13:38.966] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:13:38.982] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:13:39.142] Loaded PowerVR consumer services. [2025-09-24 04:13:39.173] Waiting data available... [2025-09-24 04:13:39.189] 512+0 records in [2025-09-24 04:13:39.189] 512+0 records out [2025-09-24 04:13:39.221] Starting syslogd/klogd: done [2025-09-24 04:13:39.237] DML Start [2025-09-24 04:13:39.445] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:13:39.653] DML res1: 0 [2025-09-24 04:13:40.047] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:13:40.047] Read Success [2025-09-24 04:13:40.047] Verifying certificate... [2025-09-24 04:13:40.271] Verified OK [2025-09-24 04:13:40.287] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:13:41.831] Verified OK [2025-09-24 04:13:41.831] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:13:42.454] Verified OK [2025-09-24 04:13:42.475] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:13:45.353] fs.protected_hardlinks = 1 [2025-09-24 04:13:45.353] fs.protected_symlinks = 1 [2025-09-24 04:13:45.369] kernel.modules_disabled = 1 [2025-09-24 04:13:45.561] [2025-09-24 04:13:45.561] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:13:46.754] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:13:54.611] SBL1:1210.0.1.0 [2025-09-24 04:13:54.659] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:13:56.226] SBL2:1210.0.1.0 [2025-09-24 04:13:56.274] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:13:56.370] j-A [2025-09-24 04:14:03.725] The R5 Autosar Classic is running [2025-09-24 04:14:03.750] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:14:03.750] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:14:04.357] INIT: version 2.96 booting [2025-09-24 04:14:04.469] INIT: Entering runlevel: 5 [2025-09-24 04:14:04.613] mtd28 attached [2025-09-24 04:14:04.629] mtd24 attached [2025-09-24 04:14:04.645] mtd32 attached [2025-09-24 04:14:04.730] RTNETLINK answers: File exists [2025-09-24 04:14:04.730] ubi0:animations is mounted. [2025-09-24 04:14:04.730] ubi1:textures is mounted. [2025-09-24 04:14:04.730] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:14:04.730] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:14:04.730] ubi2:dml_code is mounted. [2025-09-24 04:14:04.730] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:14:04.730] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:14:04.730] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:14:04.756] data.LB_FadeInType0=100 [2025-09-24 04:14:04.756] data.CHLH_FadeInType0=0 [2025-09-24 04:14:04.756] data.WU_FadeInDelay=0 [2025-09-24 04:14:04.756] max_time_out=0 [2025-09-24 04:14:04.756] No splash screen [2025-09-24 04:14:04.756] stop dss Done [2025-09-24 04:14:04.830] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:14:04.830] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:14:04.830] /dev/mem opened. [2025-09-24 04:14:04.830] Memory mapped at address 0xffff99799000. [2025-09-24 04:14:04.830] Read at address 0x00600018 (0xffff99799018): 0x00000000 [2025-09-24 04:14:04.830] Write at address 0x00600018 (0xffff99799018): 0x00400040, readback 0x00400040 [2025-09-24 04:14:04.990] Loaded PowerVR consumer services. [2025-09-24 04:14:05.086] Waiting data available... [2025-09-24 04:14:05.086] 512+0 records in [2025-09-24 04:14:05.086] 512+0 records out [2025-09-24 04:14:05.134] Starting syslogd/klogd: done [2025-09-24 04:14:05.166] DML Start [2025-09-24 04:14:05.406] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:14:05.614] DML res1: 0 [2025-09-24 04:14:05.980] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:14:05.980] Read Success [2025-09-24 04:14:05.980] Verifying certificate... [2025-09-24 04:14:06.219] Verified OK [2025-09-24 04:14:06.235] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:14:07.864] Verified OK [2025-09-24 04:14:07.864] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:14:08.467] Verified OK [2025-09-24 04:14:08.467] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:14:11.073] fs.protected_hardlinks = 1 [2025-09-24 04:14:11.089] fs.protected_symlinks = 1 [2025-09-24 04:14:11.089] kernel.modules_disabled = 1 [2025-09-24 04:14:11.281] [2025-09-24 04:14:11.281] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:14:12.675] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:14:20.491] SBL1:1210.0.1.0 [2025-09-24 04:14:20.522] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:14:22.105] SBL2:1210.0.1.0 [2025-09-24 04:14:22.137] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:14:22.249] j-A [2025-09-24 04:14:29.623] The R5 Autosar Classic is running [2025-09-24 04:14:29.623] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:14:29.623] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:14:30.230] INIT: version 2.96 booting [2025-09-24 04:14:30.342] INIT: Entering runlevel: 5 [2025-09-24 04:14:30.486] mtd24 attached [2025-09-24 04:14:30.501] mtd28 attached [2025-09-24 04:14:30.517] mtd32 attached [2025-09-24 04:14:30.549] ubi0:textures is mounted. [2025-09-24 04:14:30.598] RTNETLINK answers: File exists [2025-09-24 04:14:30.598] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:14:30.598] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:14:30.598] ubi2:dml_code is mounted. [2025-09-24 04:14:30.598] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:14:30.598] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:14:30.598] ubi1:animations is mounted. [2025-09-24 04:14:30.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:14:30.628] data.LB_FadeInType0=100 [2025-09-24 04:14:30.628] data.CHLH_FadeInType0=0 [2025-09-24 04:14:30.628] data.WU_FadeInDelay=0 [2025-09-24 04:14:30.628] max_time_out=0 [2025-09-24 04:14:30.628] No splash screen [2025-09-24 04:14:30.628] stop dss Done [2025-09-24 04:14:30.656] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:14:30.656] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:14:30.712] /dev/mem opened. [2025-09-24 04:14:30.712] Memory mapped at address 0xffff96385000. [2025-09-24 04:14:30.712] Read at address 0x00600018 (0xffff96385018): 0x00000000 [2025-09-24 04:14:30.712] Write at address 0x00600018 (0xffff96385018): 0x00400040, readback 0x00400040 [2025-09-24 04:14:30.824] Loaded PowerVR consumer services. [2025-09-24 04:14:30.952] Waiting data available... [2025-09-24 04:14:30.952] 512+0 records in [2025-09-24 04:14:30.952] 512+0 records out [2025-09-24 04:14:31.000] Starting syslogd/klogd: done [2025-09-24 04:14:31.016] DML Start [2025-09-24 04:14:31.192] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:14:31.401] DML res1: 0 [2025-09-24 04:14:31.864] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:14:31.885] Read Success [2025-09-24 04:14:31.885] Verifying certificate... [2025-09-24 04:14:32.141] Verified OK [2025-09-24 04:14:32.157] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:14:33.849] Verified OK [2025-09-24 04:14:33.849] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:14:34.464] Verified OK [2025-09-24 04:14:34.464] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:14:37.086] fs.protected_hardlinks = 1 [2025-09-24 04:14:37.086] fs.protected_symlinks = 1 [2025-09-24 04:14:37.102] kernel.modules_disabled = 1 [2025-09-24 04:14:37.293] [2025-09-24 04:14:37.293] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:14:38.537] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:14:46.401] SBL1:1210.0.1.0 [2025-09-24 04:14:46.449] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:14:48.015] SBL2:1210.0.1.0 [2025-09-24 04:14:48.063] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:14:48.175] j-A [2025-09-24 04:14:55.515] The R5 Autosar Classic is running [2025-09-24 04:14:55.540] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:14:55.540] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:14:56.148] INIT: version 2.96 booting [2025-09-24 04:14:56.259] INIT: Entering runlevel: 5 [2025-09-24 04:14:56.420] mtd28 attached [2025-09-24 04:14:56.436] mtd32 attached [2025-09-24 04:14:56.436] mtd24 attached [2025-09-24 04:14:56.484] RTNETLINK answers: File exists [2025-09-24 04:14:56.484] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:14:56.528] ubi0:animations is mounted. [2025-09-24 04:14:56.528] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:14:56.528] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:14:56.528] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:14:56.528] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:14:56.528] ubi2:textures is mounted. [2025-09-24 04:14:56.528] ubi1:dml_code is mounted. [2025-09-24 04:14:56.555] data.LB_FadeInType0=100 [2025-09-24 04:14:56.555] data.CHLH_FadeInType0=0 [2025-09-24 04:14:56.555] data.WU_FadeInDelay=0 [2025-09-24 04:14:56.555] max_time_out=0 [2025-09-24 04:14:56.555] No splash screen [2025-09-24 04:14:56.555] stop dss Done [2025-09-24 04:14:56.578] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:14:56.578] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:14:56.610] /dev/mem opened. [2025-09-24 04:14:56.610] Memory mapped at address 0xffff8195b000. [2025-09-24 04:14:56.636] Read at address 0x00600018 (0xffff8195b018): 0x00000000 [2025-09-24 04:14:56.636] Write at address 0x00600018 (0xffff8195b018): 0x00400040, readback 0x00400040 [2025-09-24 04:14:56.764] Loaded PowerVR consumer services. [2025-09-24 04:14:56.908] Waiting data available... [2025-09-24 04:14:56.908] 512+0 records in [2025-09-24 04:14:56.924] 512+0 records out [2025-09-24 04:14:56.940] Starting syslogd/klogd: done [2025-09-24 04:14:56.956] DML Start [2025-09-24 04:14:57.132] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:14:57.340] DML res1: 0 [2025-09-24 04:14:57.833] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:14:57.833] Read Success [2025-09-24 04:14:57.833] Verifying certificate... [2025-09-24 04:14:58.057] Verified OK [2025-09-24 04:14:58.073] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:14:59.624] Verified OK [2025-09-24 04:14:59.624] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:15:00.269] Verified OK [2025-09-24 04:15:00.269] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:15:03.003] fs.protected_hardlinks = 1 [2025-09-24 04:15:03.019] fs.protected_symlinks = 1 [2025-09-24 04:15:03.019] kernel.modules_disabled = 1 [2025-09-24 04:15:03.227] [2025-09-24 04:15:03.227] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:15:04.408] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:15:12.350] SBL1:1210.0.1.0 [2025-09-24 04:15:12.382] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:15:13.965] SBL2:1210.0.1.0 [2025-09-24 04:15:13.997] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:15:14.109] j-A [2025-09-24 04:15:21.449] The R5 Autosar Classic is running [2025-09-24 04:15:21.480] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:15:21.480] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:15:22.087] INIT: version 2.96 booting [2025-09-24 04:15:22.199] INIT: Entering runlevel: 5 [2025-09-24 04:15:22.359] mtd32 attached [2025-09-24 04:15:22.359] mtd28 attached [2025-09-24 04:15:22.374] mtd24 attached [2025-09-24 04:15:22.390] ubi0:dml_code is mounted. [2025-09-24 04:15:22.424] RTNETLINK answers: File exists [2025-09-24 04:15:22.476] ubi2:textures is mounted. [2025-09-24 04:15:22.476] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:15:22.476] ubi1:animations is mounted. [2025-09-24 04:15:22.476] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:15:22.476] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:15:22.476] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:15:22.476] data.LB_FadeInType0=100 [2025-09-24 04:15:22.476] data.CHLH_FadeInType0=0 [2025-09-24 04:15:22.476] data.WU_FadeInDelay=0 [2025-09-24 04:15:22.476] max_time_out=0 [2025-09-24 04:15:22.476] No splash screen [2025-09-24 04:15:22.476] stop dss Done [2025-09-24 04:15:22.476] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:15:22.548] /dev/mem opened. [2025-09-24 04:15:22.548] Memory mapped at address 0xffff8bbe0000. [2025-09-24 04:15:22.548] Read at address 0x00600018 (0xffff8bbe0018): 0x00000000 [2025-09-24 04:15:22.548] Write at address 0x00600018 (0xffff8bbe0018): 0x00400040, readback 0x00400040 [2025-09-24 04:15:22.580] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:15:22.596] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:15:22.788] Loaded PowerVR consumer services. [2025-09-24 04:15:22.836] Waiting data available... [2025-09-24 04:15:22.852] 512+0 records in [2025-09-24 04:15:22.852] 512+0 records out [2025-09-24 04:15:22.868] Starting syslogd/klogd: done [2025-09-24 04:15:22.884] DML Start [2025-09-24 04:15:23.076] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:15:23.300] DML res1: 0 [2025-09-24 04:15:23.745] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:15:23.745] Read Success [2025-09-24 04:15:23.746] Verifying certificate... [2025-09-24 04:15:24.001] Verified OK [2025-09-24 04:15:24.017] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:15:25.657] Verified OK [2025-09-24 04:15:25.657] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:15:26.248] Verified OK [2025-09-24 04:15:26.269] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:15:28.972] fs.protected_hardlinks = 1 [2025-09-24 04:15:28.988] fs.protected_symlinks = 1 [2025-09-24 04:15:28.988] kernel.modules_disabled = 1 [2025-09-24 04:15:29.195] [2025-09-24 04:15:29.195] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:15:30.379] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:15:38.343] SBL1:1210.0.1.0 [2025-09-24 04:15:38.391] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:15:39.957] SBL2:1210.0.1.0 [2025-09-24 04:15:40.005] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:15:40.101] j-A [2025-09-24 04:15:47.457] The R5 Autosar Classic is running [2025-09-24 04:15:47.479] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:15:47.479] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:15:48.086] INIT: version 2.96 booting [2025-09-24 04:15:48.198] INIT: Entering runlevel: 5 [2025-09-24 04:15:48.358] mtd32 attached [2025-09-24 04:15:48.358] mtd24 attached [2025-09-24 04:15:48.374] mtd28 attached [2025-09-24 04:15:48.422] RTNETLINK answers: File exists [2025-09-24 04:15:48.466] ubi1:textures is mounted. [2025-09-24 04:15:48.466] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:15:48.466] ubi0:dml_code is mounted. [2025-09-24 04:15:48.466] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:15:48.466] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:15:48.466] ubi2:animations is mounted. [2025-09-24 04:15:48.466] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:15:48.466] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:15:48.519] data.LB_FadeInType0=100 [2025-09-24 04:15:48.519] data.CHLH_FadeInType0=0 [2025-09-24 04:15:48.519] data.WU_FadeInDelay=0 [2025-09-24 04:15:48.519] max_time_out=0 [2025-09-24 04:15:48.519] No splash screen [2025-09-24 04:15:48.519] stop dss Done [2025-09-24 04:15:48.519] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:15:48.519] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:15:48.572] /dev/mem opened. [2025-09-24 04:15:48.572] Memory mapped at address 0xffff8a388000. [2025-09-24 04:15:48.572] Read at address 0x00600018 (0xffff8a388018): 0x00000000 [2025-09-24 04:15:48.572] Write at address 0x00600018 (0xffff8a388018): 0x00400040, readback 0x00400040 [2025-09-24 04:15:48.652] Loaded PowerVR consumer services. [2025-09-24 04:15:48.828] Waiting data available... [2025-09-24 04:15:48.828] 512+0 records in [2025-09-24 04:15:48.828] 512+0 records out [2025-09-24 04:15:48.876] Starting syslogd/klogd: done [2025-09-24 04:15:48.908] DML Start [2025-09-24 04:15:49.084] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:15:49.307] DML res1: 0 [2025-09-24 04:15:49.734] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:15:49.734] Read Success [2025-09-24 04:15:49.734] Verifying certificate... [2025-09-24 04:15:49.957] Verified OK [2025-09-24 04:15:49.973] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:15:51.509] Verified OK [2025-09-24 04:15:51.509] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:15:52.164] Verified OK [2025-09-24 04:15:52.185] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:15:54.935] fs.protected_hardlinks = 1 [2025-09-24 04:15:54.935] fs.protected_symlinks = 1 [2025-09-24 04:15:54.951] kernel.modules_disabled = 1 [2025-09-24 04:15:55.127] [2025-09-24 04:15:55.127] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:15:56.368] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:16:04.318] SBL1:1210.0.1.0 [2025-09-24 04:16:04.367] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:16:05.933] SBL2:1210.0.1.0 [2025-09-24 04:16:05.981] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:16:06.093] j-A [2025-09-24 04:16:13.433] The R5 Autosar Classic is running [2025-09-24 04:16:13.464] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:16:13.464] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:16:14.072] INIT: version 2.96 booting [2025-09-24 04:16:14.184] INIT: Entering runlevel: 5 [2025-09-24 04:16:14.344] mtd24 attached [2025-09-24 04:16:14.360] mtd28 attached [2025-09-24 04:16:14.376] mtd32 attached [2025-09-24 04:16:14.392] ubi0:textures is mounted. [2025-09-24 04:16:14.452] ubi1:animations is mounted. [2025-09-24 04:16:14.452] RTNETLINK answers: File exists [2025-09-24 04:16:14.452] ubi2:dml_code is mounted. [2025-09-24 04:16:14.452] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:16:14.452] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:16:14.452] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:16:14.452] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:16:14.452] data.LB_FadeInType0=100 [2025-09-24 04:16:14.478] data.CHLH_FadeInType0=0 [2025-09-24 04:16:14.478] data.WU_FadeInDelay=0 [2025-09-24 04:16:14.478] max_time_out=0 [2025-09-24 04:16:14.478] No splash screen [2025-09-24 04:16:14.478] stop dss Done [2025-09-24 04:16:14.478] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:16:14.545] /dev/mem opened. [2025-09-24 04:16:14.545] Memory mapped at address 0xffff8edea000. [2025-09-24 04:16:14.545] Read at address 0x00600018 (0xffff8edea018): 0x00000000 [2025-09-24 04:16:14.545] Write at address 0x00600018 (0xffff8edea018): 0x00400040, readback 0x00400040 [2025-09-24 04:16:14.545] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:16:14.574] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:16:14.782] Loaded PowerVR consumer services. [2025-09-24 04:16:14.830] Waiting data available... [2025-09-24 04:16:14.830] 512+0 records in [2025-09-24 04:16:14.830] 512+0 records out [2025-09-24 04:16:14.862] Starting syslogd/klogd: done [2025-09-24 04:16:14.878] DML Start [2025-09-24 04:16:15.070] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:16:15.293] DML res1: 0 [2025-09-24 04:16:15.756] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:16:15.756] Read Success [2025-09-24 04:16:15.756] Verifying certificate... [2025-09-24 04:16:16.044] Verified OK [2025-09-24 04:16:16.076] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:16:17.812] Verified OK [2025-09-24 04:16:17.812] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:16:18.333] Verified OK [2025-09-24 04:16:18.333] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:16:20.891] fs.protected_hardlinks = 1 [2025-09-24 04:16:20.891] fs.protected_symlinks = 1 [2025-09-24 04:16:20.907] kernel.modules_disabled = 1 [2025-09-24 04:16:21.099] [2025-09-24 04:16:21.099] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:16:22.388] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:16:30.325] SBL1:1210.0.1.0 [2025-09-24 04:16:30.356] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:16:31.940] SBL2:1210.0.1.0 [2025-09-24 04:16:31.972] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:16:32.084] j-A [2025-09-24 04:16:39.458] The R5 Autosar Classic is running [2025-09-24 04:16:39.458] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:16:39.458] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:16:40.065] INIT: version 2.96 booting [2025-09-24 04:16:40.177] INIT: Entering runlevel: 5 [2025-09-24 04:16:40.338] mtd32 attached [2025-09-24 04:16:40.338] mtd24 attached [2025-09-24 04:16:40.354] mtd28 attached [2025-09-24 04:16:40.401] ubi0:dml_code is mounted. [2025-09-24 04:16:40.401] RTNETLINK answers: File exists [2025-09-24 04:16:40.459] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:16:40.459] ubi1:textures is mounted. [2025-09-24 04:16:40.459] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:16:40.459] ubi2:animations is mounted. [2025-09-24 04:16:40.459] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:16:40.459] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:16:40.459] data.LB_FadeInType0=100 [2025-09-24 04:16:40.459] data.CHLH_FadeInType0=0 [2025-09-24 04:16:40.459] data.WU_FadeInDelay=0 [2025-09-24 04:16:40.459] max_time_out=0 [2025-09-24 04:16:40.459] No splash screen [2025-09-24 04:16:40.459] stop dss Done [2025-09-24 04:16:40.459] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:16:40.533] /dev/mem opened. [2025-09-24 04:16:40.533] Memory mapped at address 0xffffade15000. [2025-09-24 04:16:40.533] Read at address 0x00600018 (0xffffade15018): 0x00000000 [2025-09-24 04:16:40.533] Write at address 0x00600018 (0xffffade15018): 0x00400040, readback 0x00400040 [2025-09-24 04:16:40.549] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:16:40.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:16:40.644] Loaded PowerVR consumer services. [2025-09-24 04:16:40.812] Waiting data available... [2025-09-24 04:16:40.812] 512+0 records in [2025-09-24 04:16:40.812] 512+0 records out [2025-09-24 04:16:40.844] Starting syslogd/klogd: done [2025-09-24 04:16:40.876] DML Start [2025-09-24 04:16:41.051] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:16:41.276] DML res1: 0 [2025-09-24 04:16:41.685] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:16:41.685] Read Success [2025-09-24 04:16:41.685] Verifying certificate... [2025-09-24 04:16:41.909] Verified OK [2025-09-24 04:16:41.924] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:16:43.660] Verified OK [2025-09-24 04:16:43.660] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:16:44.228] Verified OK [2025-09-24 04:16:44.228] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:16:46.803] fs.protected_hardlinks = 1 [2025-09-24 04:16:46.803] fs.protected_symlinks = 1 [2025-09-24 04:16:46.819] kernel.modules_disabled = 1 [2025-09-24 04:16:47.011] [2025-09-24 04:16:47.011] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:16:48.347] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:16:56.224] SBL1:1210.0.1.0 [2025-09-24 04:16:56.272] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:16:57.838] SBL2:1210.0.1.0 [2025-09-24 04:16:57.885] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:16:57.982] j-A [2025-09-24 04:17:05.336] The R5 Autosar Classic is running [2025-09-24 04:17:05.336] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:17:05.357] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:17:05.965] INIT: version 2.96 booting [2025-09-24 04:17:06.076] INIT: Entering runlevel: 5 [2025-09-24 04:17:06.237] mtd28 attached [2025-09-24 04:17:06.237] mtd24 attached [2025-09-24 04:17:06.253] mtd32 attached [2025-09-24 04:17:06.285] ubi0:animations is mounted. [2025-09-24 04:17:06.301] RTNETLINK answers: File exists [2025-09-24 04:17:06.364] ubi1:textures is mounted. [2025-09-24 04:17:06.364] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:17:06.364] ubi2:dml_code is mounted. [2025-09-24 04:17:06.364] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:17:06.364] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:17:06.364] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:17:06.364] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:17:06.364] data.LB_FadeInType0=100 [2025-09-24 04:17:06.364] data.CHLH_FadeInType0=0 [2025-09-24 04:17:06.364] data.WU_FadeInDelay=0 [2025-09-24 04:17:06.364] max_time_out=0 [2025-09-24 04:17:06.364] No splash screen [2025-09-24 04:17:06.364] stop dss Done [2025-09-24 04:17:06.410] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:17:06.410] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:17:06.443] /dev/mem opened. [2025-09-24 04:17:06.443] Memory mapped at address 0xffffbb875000. [2025-09-24 04:17:06.443] Read at address 0x00600018 (0xffffbb875018): 0x00000000 [2025-09-24 04:17:06.443] Write at address 0x00600018 (0xffffbb875018): 0x00400040, readback 0x00400040 [2025-09-24 04:17:06.555] Loaded PowerVR consumer services. [2025-09-24 04:17:06.683] Waiting data available... [2025-09-24 04:17:06.699] 512+0 records in [2025-09-24 04:17:06.699] 512+0 records out [2025-09-24 04:17:06.732] Starting syslogd/klogd: done [2025-09-24 04:17:06.763] DML Start [2025-09-24 04:17:06.923] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:17:07.163] DML res1: 0 [2025-09-24 04:17:07.595] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:17:07.616] Read Success [2025-09-24 04:17:07.616] Verifying certificate... [2025-09-24 04:17:07.840] Verified OK [2025-09-24 04:17:07.856] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:17:09.579] Verified OK [2025-09-24 04:17:09.579] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:17:10.148] Verified OK [2025-09-24 04:17:10.148] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:17:12.724] fs.protected_hardlinks = 1 [2025-09-24 04:17:12.724] fs.protected_symlinks = 1 [2025-09-24 04:17:12.739] kernel.modules_disabled = 1 [2025-09-24 04:17:12.931] [2025-09-24 04:17:12.931] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:17:14.178] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:17:22.114] SBL1:1210.0.1.0 [2025-09-24 04:17:22.162] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:17:23.729] SBL2:1210.0.1.0 [2025-09-24 04:17:23.777] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:17:23.873] j-A [2025-09-24 04:17:31.227] The R5 Autosar Classic is running [2025-09-24 04:17:31.251] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:17:31.251] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:17:31.859] INIT: version 2.96 booting [2025-09-24 04:17:31.971] INIT: Entering runlevel: 5 [2025-09-24 04:17:32.131] mtd28 attached [2025-09-24 04:17:32.147] mtd32 attached [2025-09-24 04:17:32.147] mtd24 attached [2025-09-24 04:17:32.179] ubi0:animations is mounted. [2025-09-24 04:17:32.263] RTNETLINK answers: File exists [2025-09-24 04:17:32.263] ubi1:dml_code is mounted. [2025-09-24 04:17:32.263] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:17:32.263] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:17:32.263] ubi2:textures is mounted. [2025-09-24 04:17:32.263] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:17:32.263] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:17:32.263] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:17:32.263] data.LB_FadeInType0=100 [2025-09-24 04:17:32.263] data.CHLH_FadeInType0=0 [2025-09-24 04:17:32.263] data.WU_FadeInDelay=0 [2025-09-24 04:17:32.263] max_time_out=0 [2025-09-24 04:17:32.263] No splash screen [2025-09-24 04:17:32.263] stop dss Done [2025-09-24 04:17:32.341] /dev/mem opened. [2025-09-24 04:17:32.341] Memory mapped at address 0xffff9cd41000. [2025-09-24 04:17:32.341] Read at address 0x00600018 (0xffff9cd41018): 0x00000000 [2025-09-24 04:17:32.341] Write at address 0x00600018 (0xffff9cd41018): 0x00400040, readback 0x00400040 [2025-09-24 04:17:32.341] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:17:32.341] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:17:32.581] Loaded PowerVR consumer services. [2025-09-24 04:17:32.597] Waiting data available... [2025-09-24 04:17:32.630] 512+0 records in [2025-09-24 04:17:32.630] 512+0 records out [2025-09-24 04:17:32.678] Starting syslogd/klogd: done [2025-09-24 04:17:32.694] DML Start [2025-09-24 04:17:32.837] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:17:33.109] DML res1: 0 [2025-09-24 04:17:33.487] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:17:33.487] Read Success [2025-09-24 04:17:33.487] Verifying certificate... [2025-09-24 04:17:33.711] Verified OK [2025-09-24 04:17:33.727] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:17:35.406] Verified OK [2025-09-24 04:17:35.406] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:17:35.989] Verified OK [2025-09-24 04:17:35.989] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:17:38.709] fs.protected_hardlinks = 1 [2025-09-24 04:17:38.709] fs.protected_symlinks = 1 [2025-09-24 04:17:38.724] kernel.modules_disabled = 1 [2025-09-24 04:17:38.932] [2025-09-24 04:17:38.932] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:17:40.242] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:17:47.994] SBL1:1210.0.1.0 [2025-09-24 04:17:48.026] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:17:49.609] SBL2:1210.0.1.0 [2025-09-24 04:17:49.641] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:17:49.753] j-A [2025-09-24 04:17:57.107] The R5 Autosar Classic is running [2025-09-24 04:17:57.107] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:17:57.128] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:17:57.736] INIT: version 2.96 booting [2025-09-24 04:17:57.847] INIT: Entering runlevel: 5 [2025-09-24 04:17:58.007] mtd32 attached [2025-09-24 04:17:58.023] mtd24 attached [2025-09-24 04:17:58.023] mtd28 attached [2025-09-24 04:17:58.071] ubi0:dml_code is mounted. [2025-09-24 04:17:58.139] RTNETLINK answers: File exists [2025-09-24 04:17:58.139] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:17:58.139] ubi1:textures is mounted. [2025-09-24 04:17:58.139] ubi2:animations is mounted. [2025-09-24 04:17:58.139] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:17:58.139] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:17:58.139] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:17:58.139] data.LB_FadeInType0=100 [2025-09-24 04:17:58.139] data.CHLH_FadeInType0=0 [2025-09-24 04:17:58.139] data.WU_FadeInDelay=0 [2025-09-24 04:17:58.139] max_time_out=0 [2025-09-24 04:17:58.139] No splash screen [2025-09-24 04:17:58.139] stop dss Done [2025-09-24 04:17:58.139] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:17:58.187] /dev/mem opened. [2025-09-24 04:17:58.232] Memory mapped at address 0xffff82894000. [2025-09-24 04:17:58.232] Read at address 0x00600018 (0xffff82894018): 0x00000000 [2025-09-24 04:17:58.232] Write at address 0x00600018 (0xffff82894018): 0x00400040, readback 0x00400040 [2025-09-24 04:17:58.232] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:17:58.232] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:17:58.472] Loaded PowerVR consumer services. [2025-09-24 04:17:58.488] Waiting data available... [2025-09-24 04:17:58.504] 512+0 records in [2025-09-24 04:17:58.504] 512+0 records out [2025-09-24 04:17:58.551] Starting syslogd/klogd: done [2025-09-24 04:17:58.567] DML Start [2025-09-24 04:17:58.792] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:17:59.016] DML res1: 0 [2025-09-24 04:17:59.394] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:17:59.394] Read Success [2025-09-24 04:17:59.394] Verifying certificate... [2025-09-24 04:17:59.649] Verified OK [2025-09-24 04:17:59.665] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:18:01.152] Verified OK [2025-09-24 04:18:01.167] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:18:01.848] Verified OK [2025-09-24 04:18:01.848] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:18:04.630] fs.protected_hardlinks = 1 [2025-09-24 04:18:04.658] fs.protected_symlinks = 1 [2025-09-24 04:18:04.658] kernel.modules_disabled = 1 [2025-09-24 04:18:04.835] [2025-09-24 04:18:04.835] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:18:06.105] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:18:13.891] SBL1:1210.0.1.0 [2025-09-24 04:18:13.923] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:18:15.505] SBL2:1210.0.1.0 [2025-09-24 04:18:15.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:18:15.649] j-A [2025-09-24 04:18:23.022] The R5 Autosar Classic is running [2025-09-24 04:18:23.022] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:18:23.022] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:18:23.629] INIT: version 2.96 booting [2025-09-24 04:18:23.741] INIT: Entering runlevel: 5 [2025-09-24 04:18:23.901] mtd24 attached [2025-09-24 04:18:23.901] mtd28 attached [2025-09-24 04:18:23.917] mtd32 attached [2025-09-24 04:18:23.949] ubi0:textures is mounted. [2025-09-24 04:18:23.965] RTNETLINK answers: File exists [2025-09-24 04:18:24.036] ubi1:animations is mounted. [2025-09-24 04:18:24.036] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:18:24.036] ubi2:dml_code is mounted. [2025-09-24 04:18:24.036] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:18:24.036] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:18:24.036] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:18:24.036] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:18:24.036] data.LB_FadeInType0=100 [2025-09-24 04:18:24.036] data.CHLH_FadeInType0=0 [2025-09-24 04:18:24.036] data.WU_FadeInDelay=0 [2025-09-24 04:18:24.036] max_time_out=0 [2025-09-24 04:18:24.036] No splash screen [2025-09-24 04:18:24.036] stop dss Done [2025-09-24 04:18:24.121] /dev/mem opened. [2025-09-24 04:18:24.121] Memory mapped at address 0xffffa1777000. [2025-09-24 04:18:24.121] Read at address 0x00600018 (0xffffa1777018): 0x00000000 [2025-09-24 04:18:24.121] Write at address 0x00600018 (0xffffa1777018): 0x00400040, readback 0x00400040 [2025-09-24 04:18:24.121] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:18:24.121] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:18:24.185] Loaded PowerVR consumer services. [2025-09-24 04:18:24.372] Waiting data available... [2025-09-24 04:18:24.372] 512+0 records in [2025-09-24 04:18:24.372] 512+0 records out [2025-09-24 04:18:24.388] Starting syslogd/klogd: done [2025-09-24 04:18:24.404] DML Start [2025-09-24 04:18:24.612] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:18:24.820] DML res1: 0 [2025-09-24 04:18:25.248] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:18:25.248] Read Success [2025-09-24 04:18:25.248] Verifying certificate... [2025-09-24 04:18:25.488] Verified OK [2025-09-24 04:18:25.504] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:18:27.231] Verified OK [2025-09-24 04:18:27.231] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:18:27.846] Verified OK [2025-09-24 04:18:27.846] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:18:30.500] fs.protected_hardlinks = 1 [2025-09-24 04:18:30.500] fs.protected_symlinks = 1 [2025-09-24 04:18:30.516] kernel.modules_disabled = 1 [2025-09-24 04:18:30.708] [2025-09-24 04:18:30.708] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:18:31.870] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:18:39.797] SBL1:1210.0.1.0 [2025-09-24 04:18:39.829] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:18:41.412] SBL2:1210.0.1.0 [2025-09-24 04:18:41.443] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:18:41.555] j-A [2025-09-24 04:18:48.930] The R5 Autosar Classic is running [2025-09-24 04:18:48.930] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:18:48.930] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:18:49.537] INIT: version 2.96 booting [2025-09-24 04:18:49.649] INIT: Entering runlevel: 5 [2025-09-24 04:18:49.793] mtd24 attached [2025-09-24 04:18:49.809] mtd28 attached [2025-09-24 04:18:49.825] mtd32 attached [2025-09-24 04:18:49.873] ubi0:textures is mounted. [2025-09-24 04:18:49.873] RTNETLINK answers: File exists [2025-09-24 04:18:49.932] ubi1:animations is mounted. [2025-09-24 04:18:49.932] ubi2:dml_code is mounted. [2025-09-24 04:18:49.932] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:18:49.932] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:18:49.932] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:18:49.932] data.LB_FadeInType0=100 [2025-09-24 04:18:49.932] data.CHLH_FadeInType0=0 [2025-09-24 04:18:49.932] data.WU_FadeInDelay=0 [2025-09-24 04:18:49.932] max_time_out=0 [2025-09-24 04:18:49.932] No splash screen [2025-09-24 04:18:49.932] stop dss Done [2025-09-24 04:18:49.932] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:18:49.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:18:50.000] /dev/mem opened. [2025-09-24 04:18:50.000] Memory mapped at address 0xffffae399000. [2025-09-24 04:18:50.000] Read at address 0x00600018 (0xffffae399018): 0x00000000 [2025-09-24 04:18:50.000] Write at address 0x00600018 (0xffffae399018): 0x00400040, readback 0x00400040 [2025-09-24 04:18:50.016] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:18:50.032] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:18:50.256] Loaded PowerVR consumer services. [2025-09-24 04:18:50.272] Waiting data available... [2025-09-24 04:18:50.288] 512+0 records in [2025-09-24 04:18:50.288] 512+0 records out [2025-09-24 04:18:50.335] Starting syslogd/klogd: done [2025-09-24 04:18:50.351] DML Start [2025-09-24 04:18:50.479] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:18:50.703] DML res1: 0 [2025-09-24 04:18:51.173] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:18:51.173] Read Success [2025-09-24 04:18:51.173] Verifying certificate... [2025-09-24 04:18:51.398] Verified OK [2025-09-24 04:18:51.414] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:18:53.010] Verified OK [2025-09-24 04:18:53.010] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:18:53.697] Verified OK [2025-09-24 04:18:53.697] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:18:56.287] fs.protected_hardlinks = 1 [2025-09-24 04:18:56.303] fs.protected_symlinks = 1 [2025-09-24 04:18:56.303] kernel.modules_disabled = 1 [2025-09-24 04:18:56.494] [2025-09-24 04:18:56.494] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:18:57.771] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:19:05.687] SBL1:1210.0.1.0 [2025-09-24 04:19:05.735] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:19:07.303] SBL2:1210.0.1.0 [2025-09-24 04:19:07.351] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:19:07.462] j-A [2025-09-24 04:19:14.802] The R5 Autosar Classic is running [2025-09-24 04:19:14.827] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:19:14.827] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:19:15.434] INIT: version 2.96 booting [2025-09-24 04:19:15.547] INIT: Entering runlevel: 5 [2025-09-24 04:19:15.706] mtd28 attached [2025-09-24 04:19:15.706] mtd24 attached [2025-09-24 04:19:15.722] mtd32 attached [2025-09-24 04:19:15.802] RTNETLINK answers: File exists [2025-09-24 04:19:15.802] ubi0:animations is mounted. [2025-09-24 04:19:15.802] ubi1:textures is mounted. [2025-09-24 04:19:15.802] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:19:15.802] ubi2:dml_code is mounted. [2025-09-24 04:19:15.802] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:19:15.802] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:19:15.802] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:19:15.835] data.LB_FadeInType0=100 [2025-09-24 04:19:15.835] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:19:15.835] data.CHLH_FadeInType0=0 [2025-09-24 04:19:15.835] data.WU_FadeInDelay=0 [2025-09-24 04:19:15.835] max_time_out=0 [2025-09-24 04:19:15.835] No splash screen [2025-09-24 04:19:15.835] stop dss Done [2025-09-24 04:19:15.883] /dev/mem opened. [2025-09-24 04:19:15.883] Memory mapped at address 0xffff84391000. [2025-09-24 04:19:15.931] Read at address 0x00600018 (0xffff84391018): 0x00000000 [2025-09-24 04:19:15.931] Write at address 0x00600018 (0xffff84391018): 0x00400040, readback 0x00400040 [2025-09-24 04:19:15.931] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:19:15.931] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:19:15.995] Loaded PowerVR consumer services. [2025-09-24 04:19:16.155] Waiting data available... [2025-09-24 04:19:16.171] 512+0 records in [2025-09-24 04:19:16.171] 512+0 records out [2025-09-24 04:19:16.203] Starting syslogd/klogd: done [2025-09-24 04:19:16.219] DML Start [2025-09-24 04:19:16.379] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:19:16.666] DML res1: 0 [2025-09-24 04:19:16.986] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:19:17.003] Read Success [2025-09-24 04:19:17.003] Verifying certificate... [2025-09-24 04:19:17.290] Verified OK [2025-09-24 04:19:17.306] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:19:18.867] Verified OK [2025-09-24 04:19:18.867] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:19:19.488] Verified OK [2025-09-24 04:19:19.488] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:19:22.333] fs.protected_hardlinks = 1 [2025-09-24 04:19:22.333] fs.protected_symlinks = 1 [2025-09-24 04:19:22.333] kernel.modules_disabled = 1 [2025-09-24 04:19:22.508] [2025-09-24 04:19:22.508] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:19:23.736] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:19:31.541] SBL1:1210.0.1.0 [2025-09-24 04:19:31.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:19:33.155] SBL2:1210.0.1.0 [2025-09-24 04:19:33.203] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:19:33.316] j-A [2025-09-24 04:19:40.655] The R5 Autosar Classic is running [2025-09-24 04:19:40.681] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:19:40.681] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:19:41.288] INIT: version 2.96 booting [2025-09-24 04:19:41.400] INIT: Entering runlevel: 5 [2025-09-24 04:19:41.560] mtd28 attached [2025-09-24 04:19:41.560] mtd24 attached [2025-09-24 04:19:41.576] mtd32 attached [2025-09-24 04:19:41.624] ubi0:animations is mounted. [2025-09-24 04:19:41.690] RTNETLINK answers: File exists [2025-09-24 04:19:41.690] ubi1:textures is mounted. [2025-09-24 04:19:41.690] ubi2:dml_code is mounted. [2025-09-24 04:19:41.690] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:19:41.690] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:19:41.690] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:19:41.690] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:19:41.690] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:19:41.690] data.LB_FadeInType0=100 [2025-09-24 04:19:41.690] data.CHLH_FadeInType0=0 [2025-09-24 04:19:41.690] data.WU_FadeInDelay=0 [2025-09-24 04:19:41.690] max_time_out=0 [2025-09-24 04:19:41.690] No splash screen [2025-09-24 04:19:41.690] stop dss Done [2025-09-24 04:19:41.769] /dev/mem opened. [2025-09-24 04:19:41.769] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:19:41.769] Memory mapped at address 0xffff87536000. [2025-09-24 04:19:41.769] Read at address 0x00600018 (0xffff87536018): 0x00000000 [2025-09-24 04:19:41.769] Write at address 0x00600018 (0xffff87536018): 0x00400040, readback 0x00400040 [2025-09-24 04:19:41.769] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:19:41.850] Loaded PowerVR consumer services. [2025-09-24 04:19:42.032] Waiting data available... [2025-09-24 04:19:42.032] 512+0 records in [2025-09-24 04:19:42.032] 512+0 records out [2025-09-24 04:19:42.064] Starting syslogd/klogd: done [2025-09-24 04:19:42.080] DML Start [2025-09-24 04:19:42.256] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:19:42.481] DML res1: 0 [2025-09-24 04:19:42.913] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:19:42.928] Read Success [2025-09-24 04:19:42.928] Verifying certificate... [2025-09-24 04:19:43.152] Verified OK [2025-09-24 04:19:43.168] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:19:44.878] Verified OK [2025-09-24 04:19:44.878] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:19:45.454] Verified OK [2025-09-24 04:19:45.455] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:19:48.011] fs.protected_hardlinks = 1 [2025-09-24 04:19:48.027] fs.protected_symlinks = 1 [2025-09-24 04:19:48.027] kernel.modules_disabled = 1 [2025-09-24 04:19:48.220] [2025-09-24 04:19:48.220] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:19:49.587] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:19:57.400] SBL1:1210.0.1.0 [2025-09-24 04:19:57.432] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:19:59.015] SBL2:1210.0.1.0 [2025-09-24 04:19:59.047] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:19:59.159] j-A [2025-09-24 04:20:06.499] The R5 Autosar Classic is running [2025-09-24 04:20:06.530] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:20:06.530] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:20:07.137] INIT: version 2.96 booting [2025-09-24 04:20:07.250] INIT: Entering runlevel: 5 [2025-09-24 04:20:07.394] mtd28 attached [2025-09-24 04:20:07.410] mtd24 attached [2025-09-24 04:20:07.410] mtd32 attached [2025-09-24 04:20:07.506] RTNETLINK answers: File exists [2025-09-24 04:20:07.506] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:20:07.506] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:20:07.506] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:20:07.506] ubi1:textures is mounted. [2025-09-24 04:20:07.506] ubi0:animations is mounted. [2025-09-24 04:20:07.506] ubi2:dml_code is mounted. [2025-09-24 04:20:07.506] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:20:07.506] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:20:07.533] data.LB_FadeInType0=100 [2025-09-24 04:20:07.533] data.CHLH_FadeInType0=0 [2025-09-24 04:20:07.533] data.WU_FadeInDelay=0 [2025-09-24 04:20:07.533] max_time_out=0 [2025-09-24 04:20:07.533] No splash screen [2025-09-24 04:20:07.533] stop dss Done [2025-09-24 04:20:07.622] /dev/mem opened. [2025-09-24 04:20:07.622] Memory mapped at address 0xffffbde2f000. [2025-09-24 04:20:07.622] Read at address 0x00600018 (0xffffbde2f018): 0x00000000 [2025-09-24 04:20:07.622] Write at address 0x00600018 (0xffffbde2f018): 0x00400040, readback 0x00400040 [2025-09-24 04:20:07.622] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:20:07.622] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:20:07.831] Loaded PowerVR consumer services. [2025-09-24 04:20:07.868] 512+0 records in [2025-09-24 04:20:07.868] 512+0 records out [2025-09-24 04:20:07.868] Waiting data available... [2025-09-24 04:20:07.884] Starting syslogd/klogd: done [2025-09-24 04:20:07.900] DML Start [2025-09-24 04:20:08.076] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:20:08.300] DML res1: 0 [2025-09-24 04:20:08.732] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:20:08.748] Read Success [2025-09-24 04:20:08.748] Verifying certificate... [2025-09-24 04:20:09.003] Verified OK [2025-09-24 04:20:09.019] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:20:10.609] Verified OK [2025-09-24 04:20:10.609] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:20:11.184] Verified OK [2025-09-24 04:20:11.200] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:20:13.966] fs.protected_hardlinks = 1 [2025-09-24 04:20:13.982] fs.protected_symlinks = 1 [2025-09-24 04:20:13.982] kernel.modules_disabled = 1 [2025-09-24 04:20:14.174] [2025-09-24 04:20:14.174] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:20:15.366] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:20:23.241] SBL1:1210.0.1.0 [2025-09-24 04:20:23.273] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:20:24.856] SBL2:1210.0.1.0 [2025-09-24 04:20:24.888] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:20:24.999] j-A [2025-09-24 04:20:32.372] The R5 Autosar Classic is running [2025-09-24 04:20:32.372] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:20:32.372] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:20:32.979] INIT: version 2.96 booting [2025-09-24 04:20:33.075] INIT: Entering runlevel: 5 [2025-09-24 04:20:33.235] mtd24 attached [2025-09-24 04:20:33.251] mtd32 attached [2025-09-24 04:20:33.251] mtd28 attached [2025-09-24 04:20:33.299] ubi0:textures is mounted. [2025-09-24 04:20:33.299] RTNETLINK answers: File exists [2025-09-24 04:20:33.315] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:20:33.315] ubi1:dml_code is mounted. [2025-09-24 04:20:33.343] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:20:33.343] ubi2:animations is mounted. [2025-09-24 04:20:33.343] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:20:33.343] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:20:33.343] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:20:33.364] data.LB_FadeInType0=100 [2025-09-24 04:20:33.365] data.CHLH_FadeInType0=0 [2025-09-24 04:20:33.365] data.WU_FadeInDelay=0 [2025-09-24 04:20:33.365] max_time_out=0 [2025-09-24 04:20:33.365] No splash screen [2025-09-24 04:20:33.365] stop dss Done [2025-09-24 04:20:33.454] /dev/mem opened. [2025-09-24 04:20:33.454] Memory mapped at address 0xffff91ca6000. [2025-09-24 04:20:33.454] Read at address 0x00600018 (0xffff91ca6018): 0x00000000 [2025-09-24 04:20:33.454] Write at address 0x00600018 (0xffff91ca6018): 0x00400040, readback 0x00400040 [2025-09-24 04:20:33.454] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:20:33.470] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:20:33.662] Loaded PowerVR consumer services. [2025-09-24 04:20:33.710] 512+0 records in [2025-09-24 04:20:33.710] 512+0 records out [2025-09-24 04:20:33.710] Waiting data available... [2025-09-24 04:20:33.742] Starting syslogd/klogd: done [2025-09-24 04:20:33.758] DML Start [2025-09-24 04:20:33.902] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:20:34.125] DML res1: 0 [2025-09-24 04:20:34.542] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:20:34.542] Read Success [2025-09-24 04:20:34.558] Verifying certificate... [2025-09-24 04:20:34.765] Verified OK [2025-09-24 04:20:34.781] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:20:36.428] Verified OK [2025-09-24 04:20:36.428] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:20:37.126] Verified OK [2025-09-24 04:20:37.126] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:20:39.764] fs.protected_hardlinks = 1 [2025-09-24 04:20:39.780] fs.protected_symlinks = 1 [2025-09-24 04:20:39.780] kernel.modules_disabled = 1 [2025-09-24 04:20:39.988] [2025-09-24 04:20:39.988] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:20:41.216] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:20:49.090] SBL1:1210.0.1.0 [2025-09-24 04:20:49.122] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:20:50.705] SBL2:1210.0.1.0 [2025-09-24 04:20:50.737] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:20:50.849] j-A [2025-09-24 04:20:58.223] The R5 Autosar Classic is running [2025-09-24 04:20:58.223] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:20:58.223] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:20:58.830] INIT: version 2.96 booting [2025-09-24 04:20:58.942] INIT: Entering runlevel: 5 [2025-09-24 04:20:59.102] mtd32 attached [2025-09-24 04:20:59.102] mtd24 attached [2025-09-24 04:20:59.118] mtd28 attached [2025-09-24 04:20:59.150] ubi0:dml_code is mounted. [2025-09-24 04:20:59.166] RTNETLINK answers: File exists [2025-09-24 04:20:59.166] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:20:59.224] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:20:59.224] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:20:59.224] ubi2:animations is mounted. [2025-09-24 04:20:59.224] ubi1:textures is mounted. [2025-09-24 04:20:59.224] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:20:59.224] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:20:59.224] data.LB_FadeInType0=100 [2025-09-24 04:20:59.224] data.CHLH_FadeInType0=0 [2025-09-24 04:20:59.224] data.WU_FadeInDelay=0 [2025-09-24 04:20:59.224] max_time_out=0 [2025-09-24 04:20:59.224] No splash screen [2025-09-24 04:20:59.224] stop dss Done [2025-09-24 04:20:59.295] /dev/mem opened. [2025-09-24 04:20:59.295] Memory mapped at address 0xffff90554000. [2025-09-24 04:20:59.295] Read at address 0x00600018 (0xffff90554018): 0x00000000 [2025-09-24 04:20:59.295] Write at address 0x00600018 (0xffff90554018): 0x00400040, readback 0x00400040 [2025-09-24 04:20:59.295] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:20:59.312] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:20:59.440] Loaded PowerVR consumer services. [2025-09-24 04:20:59.551] Waiting data available... [2025-09-24 04:20:59.568] 512+0 records in [2025-09-24 04:20:59.568] 512+0 records out [2025-09-24 04:20:59.632] Starting syslogd/klogd: done [2025-09-24 04:20:59.648] DML Start [2025-09-24 04:20:59.792] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:21:00.032] DML res1: 0 [2025-09-24 04:21:00.474] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:21:00.474] Read Success [2025-09-24 04:21:00.474] Verifying certificate... [2025-09-24 04:21:00.762] Verified OK [2025-09-24 04:21:00.778] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:21:02.500] Verified OK [2025-09-24 04:21:02.500] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:21:03.088] Verified OK [2025-09-24 04:21:03.088] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:21:05.663] fs.protected_hardlinks = 1 [2025-09-24 04:21:05.679] fs.protected_symlinks = 1 [2025-09-24 04:21:05.695] kernel.modules_disabled = 1 [2025-09-24 04:21:05.871] [2025-09-24 04:21:05.871] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:21:07.063] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:21:14.923] SBL1:1210.0.1.0 [2025-09-24 04:21:14.971] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:21:16.537] SBL2:1210.0.1.0 [2025-09-24 04:21:16.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:21:16.682] j-A [2025-09-24 04:21:24.036] The R5 Autosar Classic is running [2025-09-24 04:21:24.060] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:21:24.060] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:21:24.667] INIT: version 2.96 booting [2025-09-24 04:21:24.779] INIT: Entering runlevel: 5 [2025-09-24 04:21:24.939] mtd32 attached [2025-09-24 04:21:24.939] mtd24 attached [2025-09-24 04:21:24.956] mtd28 attached [2025-09-24 04:21:25.004] RTNETLINK answers: File exists [2025-09-24 04:21:25.004] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:21:25.063] ubi0:dml_code is mounted. [2025-09-24 04:21:25.063] ubi2:animations is mounted. [2025-09-24 04:21:25.063] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:21:25.063] ubi1:textures is mounted. [2025-09-24 04:21:25.063] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:21:25.063] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:21:25.063] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:21:25.063] data.LB_FadeInType0=100 [2025-09-24 04:21:25.063] data.CHLH_FadeInType0=0 [2025-09-24 04:21:25.063] data.WU_FadeInDelay=0 [2025-09-24 04:21:25.063] max_time_out=0 [2025-09-24 04:21:25.063] No splash screen [2025-09-24 04:21:25.063] stop dss Done [2025-09-24 04:21:25.078] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:21:25.100] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:21:25.135] /dev/mem opened. [2025-09-24 04:21:25.135] Memory mapped at address 0xffff8d00d000. [2025-09-24 04:21:25.135] Read at address 0x00600018 (0xffff8d00d018): 0x00000000 [2025-09-24 04:21:25.135] Write at address 0x00600018 (0xffff8d00d018): 0x00400040, readback 0x00400040 [2025-09-24 04:21:25.391] Loaded PowerVR consumer services. [2025-09-24 04:21:25.407] Waiting data available... [2025-09-24 04:21:25.439] 512+0 records in [2025-09-24 04:21:25.439] 512+0 records out [2025-09-24 04:21:25.471] Starting syslogd/klogd: done [2025-09-24 04:21:25.487] DML Start [2025-09-24 04:21:25.679] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:21:25.903] DML res1: 0 [2025-09-24 04:21:26.328] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:21:26.328] Read Success [2025-09-24 04:21:26.328] Verifying certificate... [2025-09-24 04:21:26.552] Verified OK [2025-09-24 04:21:26.583] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:21:28.289] Verified OK [2025-09-24 04:21:28.289] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:21:28.903] Verified OK [2025-09-24 04:21:28.903] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:21:31.414] fs.protected_hardlinks = 1 [2025-09-24 04:21:31.414] fs.protected_symlinks = 1 [2025-09-24 04:21:31.430] kernel.modules_disabled = 1 [2025-09-24 04:21:31.622] [2025-09-24 04:21:31.622] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:21:32.925] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:21:40.770] SBL1:1210.0.1.0 [2025-09-24 04:21:40.818] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:21:42.384] SBL2:1210.0.1.0 [2025-09-24 04:21:42.433] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:21:42.529] j-A [2025-09-24 04:21:49.883] The R5 Autosar Classic is running [2025-09-24 04:21:49.906] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:21:49.906] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:21:50.513] INIT: version 2.96 booting [2025-09-24 04:21:50.626] INIT: Entering runlevel: 5 [2025-09-24 04:21:50.769] mtd24 attached [2025-09-24 04:21:50.785] mtd32 attached [2025-09-24 04:21:50.801] mtd28 attached [2025-09-24 04:21:50.833] ubi0:textures is mounted. [2025-09-24 04:21:50.906] RTNETLINK answers: File exists [2025-09-24 04:21:50.906] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:21:50.906] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:21:50.906] ubi1:dml_code is mounted. [2025-09-24 04:21:50.906] ubi2:animations is mounted. [2025-09-24 04:21:50.906] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:21:50.906] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:21:50.906] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:21:50.906] data.LB_FadeInType0=100 [2025-09-24 04:21:50.906] data.CHLH_FadeInType0=0 [2025-09-24 04:21:50.906] data.WU_FadeInDelay=0 [2025-09-24 04:21:50.906] max_time_out=0 [2025-09-24 04:21:50.906] No splash screen [2025-09-24 04:21:50.906] stop dss Done [2025-09-24 04:21:50.938] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:21:50.971] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:21:50.971] /dev/mem opened. [2025-09-24 04:21:50.971] Memory mapped at address 0xffffa2e25000. [2025-09-24 04:21:50.971] Read at address 0x00600018 (0xffffa2e25018): 0x00000000 [2025-09-24 04:21:50.971] Write at address 0x00600018 (0xffffa2e25018): 0x00400040, readback 0x00400040 [2025-09-24 04:21:51.240] Loaded PowerVR consumer services. [2025-09-24 04:21:51.240] Waiting data available... [2025-09-24 04:21:51.256] 512+0 records in [2025-09-24 04:21:51.256] 512+0 records out [2025-09-24 04:21:51.288] Starting syslogd/klogd: done [2025-09-24 04:21:51.303] DML Start [2025-09-24 04:21:51.447] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:21:51.623] DML res1: 0 [2025-09-24 04:21:52.198] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:21:52.198] Read Success [2025-09-24 04:21:52.198] Verifying certificate... [2025-09-24 04:21:52.453] Verified OK [2025-09-24 04:21:52.469] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:21:54.126] Verified OK [2025-09-24 04:21:54.126] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:21:54.733] Verified OK [2025-09-24 04:21:54.733] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:21:57.260] fs.protected_hardlinks = 1 [2025-09-24 04:21:57.276] fs.protected_symlinks = 1 [2025-09-24 04:21:57.276] kernel.modules_disabled = 1 [2025-09-24 04:21:57.468] [2025-09-24 04:21:57.468] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:21:58.754] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:22:06.626] SBL1:1210.0.1.0 [2025-09-24 04:22:06.674] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:22:08.240] SBL2:1210.0.1.0 [2025-09-24 04:22:08.288] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:22:08.401] j-A [2025-09-24 04:22:15.739] The R5 Autosar Classic is running [2025-09-24 04:22:15.770] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:22:15.770] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:22:16.377] INIT: version 2.96 booting [2025-09-24 04:22:16.489] INIT: Entering runlevel: 5 [2025-09-24 04:22:16.632] mtd24 attached [2025-09-24 04:22:16.648] mtd28 attached [2025-09-24 04:22:16.664] mtd32 attached [2025-09-24 04:22:16.697] ubi0:textures is mounted. [2025-09-24 04:22:16.764] RTNETLINK answers: File exists [2025-09-24 04:22:16.764] ubi1:animations is mounted. [2025-09-24 04:22:16.764] ubi2:dml_code is mounted. [2025-09-24 04:22:16.764] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:22:16.764] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:22:16.764] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:22:16.764] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:22:16.764] data.LB_FadeInType0=100 [2025-09-24 04:22:16.764] data.CHLH_FadeInType0=0 [2025-09-24 04:22:16.764] data.WU_FadeInDelay=0 [2025-09-24 04:22:16.764] max_time_out=0 [2025-09-24 04:22:16.764] No splash screen [2025-09-24 04:22:16.764] stop dss Done [2025-09-24 04:22:16.764] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:22:16.811] /dev/mem opened. [2025-09-24 04:22:16.811] Memory mapped at address 0xffffb7d08000. [2025-09-24 04:22:16.837] Read at address 0x00600018 (0xffffb7d08018): 0x00000000 [2025-09-24 04:22:16.837] Write at address 0x00600018 (0xffffb7d08018): 0x00400040, readback 0x00400040 [2025-09-24 04:22:16.869] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:22:16.869] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:22:17.046] Loaded PowerVR consumer services. [2025-09-24 04:22:17.109] Waiting data available... [2025-09-24 04:22:17.125] 512+0 records in [2025-09-24 04:22:17.125] 512+0 records out [2025-09-24 04:22:17.141] Starting syslogd/klogd: done [2025-09-24 04:22:17.157] DML Start [2025-09-24 04:22:17.302] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:22:17.573] DML res1: 0 [2025-09-24 04:22:18.010] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:22:18.010] Read Success [2025-09-24 04:22:18.010] Verifying certificate... [2025-09-24 04:22:18.250] Verified OK [2025-09-24 04:22:18.266] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:22:20.157] Verified OK [2025-09-24 04:22:20.157] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:22:20.611] Verified OK [2025-09-24 04:22:20.611] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:22:23.025] fs.protected_hardlinks = 1 [2025-09-24 04:22:23.042] fs.protected_symlinks = 1 [2025-09-24 04:22:23.042] kernel.modules_disabled = 1 [2025-09-24 04:22:23.233] [2025-09-24 04:22:23.233] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:22:24.603] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:22:32.469] SBL1:1210.0.1.0 [2025-09-24 04:22:32.517] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:22:34.084] SBL2:1210.0.1.0 [2025-09-24 04:22:34.132] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:22:34.243] j-A [2025-09-24 04:22:41.581] The R5 Autosar Classic is running [2025-09-24 04:22:41.607] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:22:41.607] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:22:42.214] INIT: version 2.96 booting [2025-09-24 04:22:42.342] INIT: Entering runlevel: 5 [2025-09-24 04:22:42.486] mtd24 attached [2025-09-24 04:22:42.502] mtd28 attached [2025-09-24 04:22:42.518] mtd32 attached [2025-09-24 04:22:42.550] ubi0:textures is mounted. [2025-09-24 04:22:42.623] RTNETLINK answers: File exists [2025-09-24 04:22:42.623] ubi2:dml_code is mounted. [2025-09-24 04:22:42.623] ubi1:animations is mounted. [2025-09-24 04:22:42.623] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:22:42.623] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:22:42.623] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:22:42.623] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:22:42.623] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:22:42.623] data.LB_FadeInType0=100 [2025-09-24 04:22:42.623] data.CHLH_FadeInType0=0 [2025-09-24 04:22:42.623] data.WU_FadeInDelay=0 [2025-09-24 04:22:42.623] max_time_out=0 [2025-09-24 04:22:42.623] No splash screen [2025-09-24 04:22:42.623] stop dss Done [2025-09-24 04:22:42.721] /dev/mem opened. [2025-09-24 04:22:42.721] Memory mapped at address 0xffffa84b2000. [2025-09-24 04:22:42.721] Read at address 0x00600018 (0xffffa84b2018): 0x00000000 [2025-09-24 04:22:42.721] Write at address 0x00600018 (0xffffa84b2018): 0x00400040, readback 0x00400040 [2025-09-24 04:22:42.721] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:22:42.721] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:22:42.913] Loaded PowerVR consumer services. [2025-09-24 04:22:42.993] Waiting data available... [2025-09-24 04:22:43.008] 512+0 records in [2025-09-24 04:22:43.008] 512+0 records out [2025-09-24 04:22:43.056] Starting syslogd/klogd: done [2025-09-24 04:22:43.073] DML Start [2025-09-24 04:22:43.248] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:22:43.472] DML res1: 0 [2025-09-24 04:22:43.872] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:22:43.887] Read Success [2025-09-24 04:22:43.887] Verifying certificate... [2025-09-24 04:22:44.112] Verified OK [2025-09-24 04:22:44.143] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:22:45.911] Verified OK [2025-09-24 04:22:45.911] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:22:46.529] Verified OK [2025-09-24 04:22:46.529] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:22:49.023] fs.protected_hardlinks = 1 [2025-09-24 04:22:49.039] fs.protected_symlinks = 1 [2025-09-24 04:22:49.055] kernel.modules_disabled = 1 [2025-09-24 04:22:49.247] [2025-09-24 04:22:49.247] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:22:50.569] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:22:58.315] SBL1:1210.0.1.0 [2025-09-24 04:22:58.363] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:22:59.929] SBL2:1210.0.1.0 [2025-09-24 04:22:59.977] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:23:00.074] j-A [2025-09-24 04:23:07.427] The R5 Autosar Classic is running [2025-09-24 04:23:07.449] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:23:07.449] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:23:08.056] INIT: version 2.96 booting [2025-09-24 04:23:08.168] INIT: Entering runlevel: 5 [2025-09-24 04:23:08.312] mtd24 attached [2025-09-24 04:23:08.328] mtd28 attached [2025-09-24 04:23:08.360] mtd32 attached [2025-09-24 04:23:08.376] ubi0:textures is mounted. [2025-09-24 04:23:08.376] ubi1:animations is mounted. [2025-09-24 04:23:08.392] RTNETLINK answers: File exists [2025-09-24 04:23:08.455] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:23:08.455] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:23:08.455] ubi2:dml_code is mounted. [2025-09-24 04:23:08.455] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:23:08.455] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:23:08.455] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:23:08.455] data.LB_FadeInType0=100 [2025-09-24 04:23:08.455] data.CHLH_FadeInType0=0 [2025-09-24 04:23:08.455] data.WU_FadeInDelay=0 [2025-09-24 04:23:08.455] max_time_out=0 [2025-09-24 04:23:08.455] No splash screen [2025-09-24 04:23:08.455] stop dss Done [2025-09-24 04:23:08.488] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:23:08.488] /dev/mem opened. [2025-09-24 04:23:08.519] Memory mapped at address 0xffff92ee9000. [2025-09-24 04:23:08.520] Read at address 0x00600018 (0xffff92ee9018): 0x00000000 [2025-09-24 04:23:08.520] Write at address 0x00600018 (0xffff92ee9018): 0x00400040, readback 0x00400040 [2025-09-24 04:23:08.520] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:23:08.679] Loaded PowerVR consumer services. [2025-09-24 04:23:08.807] Waiting data available... [2025-09-24 04:23:08.823] 512+0 records in [2025-09-24 04:23:08.823] 512+0 records out [2025-09-24 04:23:08.871] Starting syslogd/klogd: done [2025-09-24 04:23:08.887] DML Start [2025-09-24 04:23:09.063] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:23:09.270] DML res1: 0 [2025-09-24 04:23:09.670] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:23:09.686] Read Success [2025-09-24 04:23:09.686] Verifying certificate... [2025-09-24 04:23:09.910] Verified OK [2025-09-24 04:23:09.926] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:23:11.541] Verified OK [2025-09-24 04:23:11.541] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:23:12.148] Verified OK [2025-09-24 04:23:12.148] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:23:14.738] fs.protected_hardlinks = 1 [2025-09-24 04:23:14.738] fs.protected_symlinks = 1 [2025-09-24 04:23:14.755] kernel.modules_disabled = 1 [2025-09-24 04:23:14.946] [2025-09-24 04:23:14.946] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:23:16.337] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:23:24.161] SBL1:1210.0.1.0 [2025-09-24 04:23:24.209] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:23:25.775] SBL2:1210.0.1.0 [2025-09-24 04:23:25.823] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:23:25.919] j-A [2025-09-24 04:23:33.275] The R5 Autosar Classic is running [2025-09-24 04:23:33.275] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:23:33.296] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:23:33.902] INIT: version 2.96 booting [2025-09-24 04:23:34.015] INIT: Entering runlevel: 5 [2025-09-24 04:23:34.158] mtd24 attached [2025-09-24 04:23:34.174] mtd32 attached [2025-09-24 04:23:34.190] mtd28 attached [2025-09-24 04:23:34.206] ubi0:textures is mounted. [2025-09-24 04:23:34.275] RTNETLINK answers: File exists [2025-09-24 04:23:34.275] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:23:34.275] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:23:34.275] ubi2:animations is mounted. [2025-09-24 04:23:34.275] ubi1:dml_code is mounted. [2025-09-24 04:23:34.275] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:23:34.275] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:23:34.275] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:23:34.298] data.LB_FadeInType0=100 [2025-09-24 04:23:34.298] data.CHLH_FadeInType0=0 [2025-09-24 04:23:34.298] data.WU_FadeInDelay=0 [2025-09-24 04:23:34.298] max_time_out=0 [2025-09-24 04:23:34.298] No splash screen [2025-09-24 04:23:34.298] stop dss Done [2025-09-24 04:23:34.314] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:23:34.330] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:23:34.346] /dev/mem opened. [2025-09-24 04:23:34.378] Memory mapped at address 0xffff92d90000. [2025-09-24 04:23:34.378] Read at address 0x00600018 (0xffff92d90018): 0x00000000 [2025-09-24 04:23:34.378] Write at address 0x00600018 (0xffff92d90018): 0x00400040, readback 0x00400040 [2025-09-24 04:23:34.617] Loaded PowerVR consumer services. [2025-09-24 04:23:34.665] Waiting data available... [2025-09-24 04:23:34.681] 512+0 records in [2025-09-24 04:23:34.681] 512+0 records out [2025-09-24 04:23:34.713] Starting syslogd/klogd: done [2025-09-24 04:23:34.729] DML Start [2025-09-24 04:23:34.905] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:23:35.145] DML res1: 0 [2025-09-24 04:23:35.524] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:23:35.524] Read Success [2025-09-24 04:23:35.524] Verifying certificate... [2025-09-24 04:23:35.748] Verified OK [2025-09-24 04:23:35.764] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:23:37.260] Verified OK [2025-09-24 04:23:37.260] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:23:37.857] Verified OK [2025-09-24 04:23:37.857] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:23:40.638] fs.protected_hardlinks = 1 [2025-09-24 04:23:40.638] fs.protected_symlinks = 1 [2025-09-24 04:23:40.655] kernel.modules_disabled = 1 [2025-09-24 04:23:40.847] [2025-09-24 04:23:40.847] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:23:42.167] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:23:50.012] SBL1:1210.0.1.0 [2025-09-24 04:23:50.061] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:23:51.627] SBL2:1210.0.1.0 [2025-09-24 04:23:51.675] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:23:51.771] j-A [2025-09-24 04:23:59.127] The R5 Autosar Classic is running [2025-09-24 04:23:59.151] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:23:59.151] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:23:59.759] INIT: version 2.96 booting [2025-09-24 04:23:59.870] INIT: Entering runlevel: 5 [2025-09-24 04:24:00.030] mtd24 attached [2025-09-24 04:24:00.030] mtd28 attached [2025-09-24 04:24:00.046] mtd32 attached [2025-09-24 04:24:00.153] ubi0:textures is mounted. [2025-09-24 04:24:00.153] ubi1:animations is mounted. [2025-09-24 04:24:00.153] RTNETLINK answers: File exists [2025-09-24 04:24:00.153] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:24:00.153] ubi2:dml_code is mounted. [2025-09-24 04:24:00.153] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:24:00.153] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:24:00.153] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:24:00.153] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:24:00.153] data.LB_FadeInType0=100 [2025-09-24 04:24:00.153] data.CHLH_FadeInType0=0 [2025-09-24 04:24:00.153] data.WU_FadeInDelay=0 [2025-09-24 04:24:00.153] max_time_out=0 [2025-09-24 04:24:00.153] No splash screen [2025-09-24 04:24:00.153] stop dss Done [2025-09-24 04:24:00.193] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:24:00.193] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:24:00.228] /dev/mem opened. [2025-09-24 04:24:00.228] Memory mapped at address 0xffff85fcf000. [2025-09-24 04:24:00.228] Read at address 0x00600018 (0xffff85fcf018): 0x00000000 [2025-09-24 04:24:00.228] Write at address 0x00600018 (0xffff85fcf018): 0x00400040, readback 0x00400040 [2025-09-24 04:24:00.468] Loaded PowerVR consumer services. [2025-09-24 04:24:00.516] Waiting data available... [2025-09-24 04:24:00.532] 512+0 records in [2025-09-24 04:24:00.532] 512+0 records out [2025-09-24 04:24:00.563] Starting syslogd/klogd: done [2025-09-24 04:24:00.579] DML Start [2025-09-24 04:24:00.740] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:24:00.979] DML res1: 0 [2025-09-24 04:24:01.456] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:24:01.456] Read Success [2025-09-24 04:24:01.456] Verifying certificate... [2025-09-24 04:24:01.696] Verified OK [2025-09-24 04:24:01.712] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:24:03.341] Verified OK [2025-09-24 04:24:03.341] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:24:03.975] Verified OK [2025-09-24 04:24:03.975] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:24:06.660] fs.protected_hardlinks = 1 [2025-09-24 04:24:06.660] fs.protected_symlinks = 1 [2025-09-24 04:24:06.676] kernel.modules_disabled = 1 [2025-09-24 04:24:06.852] [2025-09-24 04:24:06.852] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:24:07.982] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:24:15.839] SBL1:1210.0.1.0 [2025-09-24 04:24:15.887] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:24:17.454] SBL2:1210.0.1.0 [2025-09-24 04:24:17.502] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:24:17.614] j-A [2025-09-24 04:24:24.954] The R5 Autosar Classic is running [2025-09-24 04:24:24.979] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:24:24.979] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:24:25.587] INIT: version 2.96 booting [2025-09-24 04:24:25.698] INIT: Entering runlevel: 5 [2025-09-24 04:24:25.859] mtd28 attached [2025-09-24 04:24:25.859] mtd24 attached [2025-09-24 04:24:25.875] mtd32 attached [2025-09-24 04:24:25.906] ubi0:animations is mounted. [2025-09-24 04:24:25.985] RTNETLINK answers: File exists [2025-09-24 04:24:25.985] ubi2:dml_code is mounted. [2025-09-24 04:24:25.985] ubi1:textures is mounted. [2025-09-24 04:24:25.985] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:24:25.985] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:24:25.985] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:24:25.985] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:24:25.985] data.LB_FadeInType0=100 [2025-09-24 04:24:25.985] data.CHLH_FadeInType0=0 [2025-09-24 04:24:25.985] data.WU_FadeInDelay=0 [2025-09-24 04:24:25.985] max_time_out=0 [2025-09-24 04:24:25.985] No splash screen [2025-09-24 04:24:25.985] stop dss Done [2025-09-24 04:24:25.985] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:24:26.055] /dev/mem opened. [2025-09-24 04:24:26.055] Memory mapped at address 0xffff8d0db000. [2025-09-24 04:24:26.055] Read at address 0x00600018 (0xffff8d0db018): 0x00000000 [2025-09-24 04:24:26.055] Write at address 0x00600018 (0xffff8d0db018): 0x00400040, readback 0x00400040 [2025-09-24 04:24:26.055] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:24:26.055] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:24:26.151] Loaded PowerVR consumer services. [2025-09-24 04:24:26.311] Waiting data available... [2025-09-24 04:24:26.327] 512+0 records in [2025-09-24 04:24:26.327] 512+0 records out [2025-09-24 04:24:26.375] Starting syslogd/klogd: done [2025-09-24 04:24:26.391] DML Start [2025-09-24 04:24:26.567] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:24:26.791] DML res1: 0 [2025-09-24 04:24:27.248] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:24:27.248] Read Success [2025-09-24 04:24:27.248] Verifying certificate... [2025-09-24 04:24:27.488] Verified OK [2025-09-24 04:24:27.504] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:24:29.129] Verified OK [2025-09-24 04:24:29.129] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:24:29.718] Verified OK [2025-09-24 04:24:29.718] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:24:32.484] fs.protected_hardlinks = 1 [2025-09-24 04:24:32.484] fs.protected_symlinks = 1 [2025-09-24 04:24:32.500] kernel.modules_disabled = 1 [2025-09-24 04:24:32.691] [2025-09-24 04:24:32.691] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:24:33.890] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:24:41.679] SBL1:1210.0.1.0 [2025-09-24 04:24:41.727] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:24:43.294] SBL2:1210.0.1.0 [2025-09-24 04:24:43.342] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:24:43.437] j-A [2025-09-24 04:24:50.793] The R5 Autosar Classic is running [2025-09-24 04:24:50.816] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:24:50.816] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:24:51.424] INIT: version 2.96 booting [2025-09-24 04:24:51.536] INIT: Entering runlevel: 5 [2025-09-24 04:24:51.696] mtd24 attached [2025-09-24 04:24:51.712] mtd28 attached [2025-09-24 04:24:51.728] mtd32 attached [2025-09-24 04:24:51.829] RTNETLINK answers: File exists [2025-09-24 04:24:51.829] ubi0:textures is mounted. [2025-09-24 04:24:51.829] ubi1:animations is mounted. [2025-09-24 04:24:51.829] ubi2:dml_code is mounted. [2025-09-24 04:24:51.829] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:24:51.829] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:24:51.829] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:24:51.829] data.LB_FadeInType0=100 [2025-09-24 04:24:51.829] data.CHLH_FadeInType0=0 [2025-09-24 04:24:51.829] data.WU_FadeInDelay=0 [2025-09-24 04:24:51.829] max_time_out=0 [2025-09-24 04:24:51.829] No splash screen [2025-09-24 04:24:51.829] stop dss Done [2025-09-24 04:24:51.829] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:24:51.829] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:24:51.896] /dev/mem opened. [2025-09-24 04:24:51.896] Memory mapped at address 0xffff8d335000. [2025-09-24 04:24:51.896] Read at address 0x00600018 (0xffff8d335018): 0x00000000 [2025-09-24 04:24:51.896] Write at address 0x00600018 (0xffff8d335018): 0x00400040, readback 0x00400040 [2025-09-24 04:24:51.896] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:24:51.912] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:24:52.151] Loaded PowerVR consumer services. [2025-09-24 04:24:52.199] Waiting data available... [2025-09-24 04:24:52.215] 512+0 records in [2025-09-24 04:24:52.215] 512+0 records out [2025-09-24 04:24:52.263] Starting syslogd/klogd: done [2025-09-24 04:24:52.279] DML Start [2025-09-24 04:24:52.455] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:24:52.695] DML res1: 0 [2025-09-24 04:24:53.071] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:24:53.071] Read Success [2025-09-24 04:24:53.071] Verifying certificate... [2025-09-24 04:24:53.359] Verified OK [2025-09-24 04:24:53.375] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:24:55.052] Verified OK [2025-09-24 04:24:55.052] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:24:55.659] Verified OK [2025-09-24 04:24:55.659] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:24:58.233] fs.protected_hardlinks = 1 [2025-09-24 04:24:58.233] fs.protected_symlinks = 1 [2025-09-24 04:24:58.249] kernel.modules_disabled = 1 [2025-09-24 04:24:58.442] [2025-09-24 04:24:58.442] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:24:59.696] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:25:07.545] SBL1:1210.0.1.0 [2025-09-24 04:25:07.576] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:25:09.159] SBL2:1210.0.1.0 [2025-09-24 04:25:09.207] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:25:09.303] j-A [2025-09-24 04:25:16.659] The R5 Autosar Classic is running [2025-09-24 04:25:16.659] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:25:16.679] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:25:17.287] INIT: version 2.96 booting [2025-09-24 04:25:17.400] INIT: Entering runlevel: 5 [2025-09-24 04:25:17.559] mtd24 attached [2025-09-24 04:25:17.559] mtd28 attached [2025-09-24 04:25:17.575] mtd32 attached [2025-09-24 04:25:17.608] ubi0:textures is mounted. [2025-09-24 04:25:17.623] ubi1:animations is mounted. [2025-09-24 04:25:17.662] RTNETLINK answers: File exists [2025-09-24 04:25:17.662] ubi2:dml_code is mounted. [2025-09-24 04:25:17.662] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:25:17.662] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:25:17.662] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:25:17.699] data.LB_FadeInType0=100 [2025-09-24 04:25:17.699] data.CHLH_FadeInType0=0 [2025-09-24 04:25:17.699] data.WU_FadeInDelay=0 [2025-09-24 04:25:17.699] max_time_out=0 [2025-09-24 04:25:17.699] No splash screen [2025-09-24 04:25:17.699] stop dss Done [2025-09-24 04:25:17.699] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:25:17.699] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:25:17.731] /dev/mem opened. [2025-09-24 04:25:17.731] Memory mapped at address 0xffff90eb9000. [2025-09-24 04:25:17.763] Read at address 0x00600018 (0xffff90eb9018): 0x00000000 [2025-09-24 04:25:17.763] Write at address 0x00600018 (0xffff90eb9018): 0x00400040, readback 0x00400040 [2025-09-24 04:25:17.763] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:25:17.763] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:25:17.843] Loaded PowerVR consumer services. [2025-09-24 04:25:18.035] Waiting data available... [2025-09-24 04:25:18.051] 512+0 records in [2025-09-24 04:25:18.051] 512+0 records out [2025-09-24 04:25:18.067] Starting syslogd/klogd: done [2025-09-24 04:25:18.099] DML Start [2025-09-24 04:25:18.307] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:25:18.499] DML res1: 0 [2025-09-24 04:25:18.923] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:25:18.923] Read Success [2025-09-24 04:25:18.923] Verifying certificate... [2025-09-24 04:25:19.164] Verified OK [2025-09-24 04:25:19.180] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:25:20.933] Verified OK [2025-09-24 04:25:20.933] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:25:21.474] Verified OK [2025-09-24 04:25:21.474] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:25:24.049] fs.protected_hardlinks = 1 [2025-09-24 04:25:24.064] fs.protected_symlinks = 1 [2025-09-24 04:25:24.064] kernel.modules_disabled = 1 [2025-09-24 04:25:24.257] [2025-09-24 04:25:24.257] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:25:25.519] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:25:33.353] SBL1:1210.0.1.0 [2025-09-24 04:25:33.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:25:34.968] SBL2:1210.0.1.0 [2025-09-24 04:25:35.016] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:25:35.128] j-A [2025-09-24 04:25:42.498] The R5 Autosar Classic is running [2025-09-24 04:25:42.498] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:25:42.498] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:25:43.107] INIT: version 2.96 booting [2025-09-24 04:25:43.219] INIT: Entering runlevel: 5 [2025-09-24 04:25:43.363] mtd28 attached [2025-09-24 04:25:43.378] mtd32 attached [2025-09-24 04:25:43.378] mtd24 attached [2025-09-24 04:25:43.426] ubi0:animations is mounted. [2025-09-24 04:25:43.442] RTNETLINK answers: File exists [2025-09-24 04:25:43.442] ubi1:dml_code is mounted. [2025-09-24 04:25:43.474] ubi2:textures is mounted. [2025-09-24 04:25:43.474] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:25:43.474] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:25:43.474] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:25:43.474] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:25:43.506] data.LB_FadeInType0=100 [2025-09-24 04:25:43.506] data.CHLH_FadeInType0=0 [2025-09-24 04:25:43.506] data.WU_FadeInDelay=0 [2025-09-24 04:25:43.506] max_time_out=0 [2025-09-24 04:25:43.506] No splash screen [2025-09-24 04:25:43.506] stop dss Done [2025-09-24 04:25:43.506] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:25:43.539] /dev/mem opened. [2025-09-24 04:25:43.584] Memory mapped at address 0xffff84a25000. [2025-09-24 04:25:43.584] Read at address 0x00600018 (0xffff84a25018): 0x00000000 [2025-09-24 04:25:43.584] Write at address 0x00600018 (0xffff84a25018): 0x00400040, readback 0x00400040 [2025-09-24 04:25:43.584] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:25:43.584] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:25:43.743] Loaded PowerVR consumer services. [2025-09-24 04:25:43.839] Waiting data available... [2025-09-24 04:25:43.871] 512+0 records in [2025-09-24 04:25:43.871] 512+0 records out [2025-09-24 04:25:43.919] Starting syslogd/klogd: done [2025-09-24 04:25:43.935] DML Start [2025-09-24 04:25:44.110] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:25:44.302] DML res1: 0 [2025-09-24 04:25:44.820] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:25:44.820] Read Success [2025-09-24 04:25:44.820] Verifying certificate... [2025-09-24 04:25:45.091] Verified OK [2025-09-24 04:25:45.123] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:25:46.816] Verified OK [2025-09-24 04:25:46.816] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:25:47.358] Verified OK [2025-09-24 04:25:47.358] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:25:49.901] fs.protected_hardlinks = 1 [2025-09-24 04:25:49.917] fs.protected_symlinks = 1 [2025-09-24 04:25:49.917] kernel.modules_disabled = 1 [2025-09-24 04:25:50.109] [2025-09-24 04:25:50.109] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:25:51.367] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:25:59.201] SBL1:1210.0.1.0 [2025-09-24 04:25:59.249] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:26:00.816] SBL2:1210.0.1.0 [2025-09-24 04:26:00.863] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:26:00.975] j-A [2025-09-24 04:26:08.313] The R5 Autosar Classic is running [2025-09-24 04:26:08.338] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:26:08.338] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:26:08.946] INIT: version 2.96 booting [2025-09-24 04:26:09.057] INIT: Entering runlevel: 5 [2025-09-24 04:26:09.217] mtd24 attached [2025-09-24 04:26:09.217] mtd28 attached [2025-09-24 04:26:09.233] mtd32 attached [2025-09-24 04:26:09.265] ubi0:textures is mounted. [2025-09-24 04:26:09.281] ubi1:animations is mounted. [2025-09-24 04:26:09.350] RTNETLINK answers: File exists [2025-09-24 04:26:09.350] ubi2:dml_code is mounted. [2025-09-24 04:26:09.350] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:26:09.350] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:26:09.350] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:26:09.350] data.LB_FadeInType0=100 [2025-09-24 04:26:09.350] data.CHLH_FadeInType0=0 [2025-09-24 04:26:09.350] data.WU_FadeInDelay=0 [2025-09-24 04:26:09.350] max_time_out=0 [2025-09-24 04:26:09.350] No splash screen [2025-09-24 04:26:09.350] stop dss Done [2025-09-24 04:26:09.350] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:26:09.350] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:26:09.426] /dev/mem opened. [2025-09-24 04:26:09.426] Memory mapped at address 0xffff9156f000. [2025-09-24 04:26:09.426] Read at address 0x00600018 (0xffff9156f018): 0x00000000 [2025-09-24 04:26:09.426] Write at address 0x00600018 (0xffff9156f018): 0x00400040, readback 0x00400040 [2025-09-24 04:26:09.426] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:26:09.426] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:26:09.522] Loaded PowerVR consumer services. [2025-09-24 04:26:09.682] Waiting data available... [2025-09-24 04:26:09.698] 512+0 records in [2025-09-24 04:26:09.714] 512+0 records out [2025-09-24 04:26:09.762] Starting syslogd/klogd: done [2025-09-24 04:26:09.778] DML Start [2025-09-24 04:26:09.986] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:26:10.193] DML res1: 0 [2025-09-24 04:26:10.626] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:26:10.647] Read Success [2025-09-24 04:26:10.647] Verifying certificate... [2025-09-24 04:26:10.934] Verified OK [2025-09-24 04:26:10.966] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:26:12.578] Verified OK [2025-09-24 04:26:12.578] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:26:13.170] Verified OK [2025-09-24 04:26:13.170] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:26:15.808] fs.protected_hardlinks = 1 [2025-09-24 04:26:15.808] fs.protected_symlinks = 1 [2025-09-24 04:26:15.824] kernel.modules_disabled = 1 [2025-09-24 04:26:16.033] [2025-09-24 04:26:16.033] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:26:17.180] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:26:25.058] SBL1:1210.0.1.0 [2025-09-24 04:26:25.106] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:26:26.673] SBL2:1210.0.1.0 [2025-09-24 04:26:26.721] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:26:26.817] j-A [2025-09-24 04:26:34.171] The R5 Autosar Classic is running [2025-09-24 04:26:34.196] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:26:34.196] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:26:34.803] INIT: version 2.96 booting [2025-09-24 04:26:34.915] INIT: Entering runlevel: 5 [2025-09-24 04:26:35.075] mtd32 attached [2025-09-24 04:26:35.091] mtd24 attached [2025-09-24 04:26:35.091] mtd28 attached [2025-09-24 04:26:35.139] RTNETLINK answers: File exists [2025-09-24 04:26:35.191] ubi0:dml_code is mounted. [2025-09-24 04:26:35.191] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:26:35.191] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:26:35.191] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:26:35.191] ubi2:animations is mounted. [2025-09-24 04:26:35.191] ubi1:textures is mounted. [2025-09-24 04:26:35.191] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:26:35.191] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:26:35.191] data.LB_FadeInType0=100 [2025-09-24 04:26:35.212] data.CHLH_FadeInType0=0 [2025-09-24 04:26:35.212] data.WU_FadeInDelay=0 [2025-09-24 04:26:35.212] max_time_out=0 [2025-09-24 04:26:35.212] No splash screen [2025-09-24 04:26:35.212] stop dss Done [2025-09-24 04:26:35.228] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:26:35.244] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:26:35.285] /dev/mem opened. [2025-09-24 04:26:35.285] Memory mapped at address 0xffffa8ec5000. [2025-09-24 04:26:35.285] Read at address 0x00600018 (0xffffa8ec5018): 0x00000000 [2025-09-24 04:26:35.285] Write at address 0x00600018 (0xffffa8ec5018): 0x00400040, readback 0x00400040 [2025-09-24 04:26:35.539] Loaded PowerVR consumer services. [2025-09-24 04:26:35.539] Waiting data available... [2025-09-24 04:26:35.571] 512+0 records in [2025-09-24 04:26:35.571] 512+0 records out [2025-09-24 04:26:35.619] Starting syslogd/klogd: done [2025-09-24 04:26:35.634] DML Start [2025-09-24 04:26:35.827] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:26:36.051] DML res1: 0 [2025-09-24 04:26:36.479] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:26:36.479] Read Success [2025-09-24 04:26:36.479] Verifying certificate... [2025-09-24 04:26:36.783] Verified OK [2025-09-24 04:26:36.798] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:26:38.598] Verified OK [2025-09-24 04:26:38.598] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:26:39.139] Verified OK [2025-09-24 04:26:39.139] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:26:41.650] fs.protected_hardlinks = 1 [2025-09-24 04:26:41.666] fs.protected_symlinks = 1 [2025-09-24 04:26:41.682] kernel.modules_disabled = 1 [2025-09-24 04:26:41.858] [2025-09-24 04:26:41.858] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:26:43.080] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:26:50.892] SBL1:1210.0.1.0 [2025-09-24 04:26:50.924] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:26:52.506] SBL2:1210.0.1.0 [2025-09-24 04:26:52.538] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:26:52.650] j-A [2025-09-24 04:27:00.024] The R5 Autosar Classic is running [2025-09-24 04:27:00.024] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:27:00.024] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:27:00.632] INIT: version 2.96 booting [2025-09-24 04:27:00.743] INIT: Entering runlevel: 5 [2025-09-24 04:27:00.887] mtd32 attached [2025-09-24 04:27:00.904] mtd24 attached [2025-09-24 04:27:00.920] mtd28 attached [2025-09-24 04:27:00.967] RTNETLINK answers: File exists [2025-09-24 04:27:00.967] ubi0:dml_code is mounted. [2025-09-24 04:27:01.021] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:27:01.021] ubi1:textures is mounted. [2025-09-24 04:27:01.021] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:27:01.021] ubi2:animations is mounted. [2025-09-24 04:27:01.021] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:27:01.021] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:27:01.021] data.LB_FadeInType0=100 [2025-09-24 04:27:01.021] data.CHLH_FadeInType0=0 [2025-09-24 04:27:01.021] data.WU_FadeInDelay=0 [2025-09-24 04:27:01.021] max_time_out=0 [2025-09-24 04:27:01.021] No splash screen [2025-09-24 04:27:01.021] stop dss Done [2025-09-24 04:27:01.021] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:27:01.094] /dev/mem opened. [2025-09-24 04:27:01.094] Memory mapped at address 0xffff88fb6000. [2025-09-24 04:27:01.094] Read at address 0x00600018 (0xffff88fb6018): 0x00000000 [2025-09-24 04:27:01.094] Write at address 0x00600018 (0xffff88fb6018): 0x00400040, readback 0x00400040 [2025-09-24 04:27:01.094] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:27:01.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:27:01.190] Loaded PowerVR consumer services. [2025-09-24 04:27:01.366] Waiting data available... [2025-09-24 04:27:01.382] 512+0 records in [2025-09-24 04:27:01.382] 512+0 records out [2025-09-24 04:27:01.414] Starting syslogd/klogd: done [2025-09-24 04:27:01.430] DML Start [2025-09-24 04:27:01.606] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:27:01.846] DML res1: 0 [2025-09-24 04:27:02.261] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:27:02.277] Read Success [2025-09-24 04:27:02.277] Verifying certificate... [2025-09-24 04:27:02.533] Verified OK [2025-09-24 04:27:02.549] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:27:04.190] Verified OK [2025-09-24 04:27:04.190] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:27:04.810] Verified OK [2025-09-24 04:27:04.810] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:27:07.352] fs.protected_hardlinks = 1 [2025-09-24 04:27:07.368] fs.protected_symlinks = 1 [2025-09-24 04:27:07.368] kernel.modules_disabled = 1 [2025-09-24 04:27:07.560] [2025-09-24 04:27:07.560] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:27:08.879] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:27:16.726] SBL1:1210.0.1.0 [2025-09-24 04:27:16.758] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:27:18.342] SBL2:1210.0.1.0 [2025-09-24 04:27:18.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:27:18.485] j-A [2025-09-24 04:27:25.858] The R5 Autosar Classic is running [2025-09-24 04:27:25.858] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:27:25.858] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:27:26.465] INIT: version 2.96 booting [2025-09-24 04:27:26.578] INIT: Entering runlevel: 5 [2025-09-24 04:27:26.737] mtd28 attached [2025-09-24 04:27:26.737] mtd32 attached [2025-09-24 04:27:26.753] mtd24 attached [2025-09-24 04:27:26.802] RTNETLINK answers: File exists [2025-09-24 04:27:26.802] ubi1:dml_code is mounted. [2025-09-24 04:27:26.861] ubi2:textures is mounted. [2025-09-24 04:27:26.861] ubi0:animations is mounted. [2025-09-24 04:27:26.861] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:27:26.861] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:27:26.861] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:27:26.861] data.LB_FadeInType0=100 [2025-09-24 04:27:26.861] data.CHLH_FadeInType0=0 [2025-09-24 04:27:26.861] data.WU_FadeInDelay=0 [2025-09-24 04:27:26.861] max_time_out=0 [2025-09-24 04:27:26.861] No splash screen [2025-09-24 04:27:26.861] stop dss Done [2025-09-24 04:27:26.861] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:27:26.861] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:27:26.908] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:27:26.924] /dev/mem opened. [2025-09-24 04:27:26.924] Memory mapped at address 0xffffb9384000. [2025-09-24 04:27:26.950] Read at address 0x00600018 (0xffffb9384018): 0x00000000 [2025-09-24 04:27:26.950] Write at address 0x00600018 (0xffffb9384018): 0x00400040, readback 0x00400040 [2025-09-24 04:27:26.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:27:27.047] Loaded PowerVR consumer services. [2025-09-24 04:27:27.190] Waiting data available... [2025-09-24 04:27:27.222] 512+0 records in [2025-09-24 04:27:27.222] 512+0 records out [2025-09-24 04:27:27.239] Starting syslogd/klogd: done [2025-09-24 04:27:27.255] DML Start [2025-09-24 04:27:27.462] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:27:27.638] DML res1: 0 [2025-09-24 04:27:28.118] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:27:28.133] Read Success [2025-09-24 04:27:28.133] Verifying certificate... [2025-09-24 04:27:28.374] Verified OK [2025-09-24 04:27:28.389] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:27:30.154] Verified OK [2025-09-24 04:27:30.154] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:27:30.730] Verified OK [2025-09-24 04:27:30.730] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:27:33.320] fs.protected_hardlinks = 1 [2025-09-24 04:27:33.335] fs.protected_symlinks = 1 [2025-09-24 04:27:33.335] kernel.modules_disabled = 1 [2025-09-24 04:27:33.544] [2025-09-24 04:27:33.544] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:27:34.673] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:27:42.554] SBL1:1210.0.1.0 [2025-09-24 04:27:42.586] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:27:44.168] SBL2:1210.0.1.0 [2025-09-24 04:27:44.200] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:27:44.312] j-A [2025-09-24 04:27:51.684] The R5 Autosar Classic is running [2025-09-24 04:27:51.684] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:27:51.684] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:27:52.292] INIT: version 2.96 booting [2025-09-24 04:27:52.403] INIT: Entering runlevel: 5 [2025-09-24 04:27:52.548] mtd28 attached [2025-09-24 04:27:52.563] mtd24 attached [2025-09-24 04:27:52.579] mtd32 attached [2025-09-24 04:27:52.611] ubi0:animations is mounted. [2025-09-24 04:27:52.627] RTNETLINK answers: File exists [2025-09-24 04:27:52.627] ubi1:textures is mounted. [2025-09-24 04:27:52.686] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:27:52.686] ubi2:dml_code is mounted. [2025-09-24 04:27:52.686] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:27:52.686] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:27:52.686] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:27:52.686] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:27:52.686] data.LB_FadeInType0=100 [2025-09-24 04:27:52.686] data.CHLH_FadeInType0=0 [2025-09-24 04:27:52.686] data.WU_FadeInDelay=0 [2025-09-24 04:27:52.686] max_time_out=0 [2025-09-24 04:27:52.686] No splash screen [2025-09-24 04:27:52.686] stop dss Done [2025-09-24 04:27:52.734] /dev/mem opened. [2025-09-24 04:27:52.771] Memory mapped at address 0xffff9f35f000. [2025-09-24 04:27:52.771] Read at address 0x00600018 (0xffff9f35f018): 0x00000000 [2025-09-24 04:27:52.771] Write at address 0x00600018 (0xffff9f35f018): 0x00400040, readback 0x00400040 [2025-09-24 04:27:52.771] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:27:52.771] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:27:52.947] Loaded PowerVR consumer services. [2025-09-24 04:27:53.043] Waiting data available... [2025-09-24 04:27:53.059] 512+0 records in [2025-09-24 04:27:53.059] 512+0 records out [2025-09-24 04:27:53.107] Starting syslogd/klogd: done [2025-09-24 04:27:53.123] DML Start [2025-09-24 04:27:53.331] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:27:53.523] DML res1: 0 [2025-09-24 04:27:53.954] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:27:53.970] Read Success [2025-09-24 04:27:53.970] Verifying certificate... [2025-09-24 04:27:54.226] Verified OK [2025-09-24 04:27:54.242] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:27:55.927] Verified OK [2025-09-24 04:27:55.927] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:27:56.560] Verified OK [2025-09-24 04:27:56.560] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:27:59.198] fs.protected_hardlinks = 1 [2025-09-24 04:27:59.198] fs.protected_symlinks = 1 [2025-09-24 04:27:59.214] kernel.modules_disabled = 1 [2025-09-24 04:27:59.405] [2025-09-24 04:27:59.405] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:28:00.620] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:28:08.405] SBL1:1210.0.1.0 [2025-09-24 04:28:08.437] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:28:10.020] SBL2:1210.0.1.0 [2025-09-24 04:28:10.052] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:28:10.163] j-A [2025-09-24 04:28:17.536] The R5 Autosar Classic is running [2025-09-24 04:28:17.536] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:28:17.536] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:28:18.144] INIT: version 2.96 booting [2025-09-24 04:28:18.240] INIT: Entering runlevel: 5 [2025-09-24 04:28:18.400] mtd24 attached [2025-09-24 04:28:18.416] mtd28 attached [2025-09-24 04:28:18.432] mtd32 attached [2025-09-24 04:28:18.480] ubi0:textures is mounted. [2025-09-24 04:28:18.480] RTNETLINK answers: File exists [2025-09-24 04:28:18.535] ubi1:animations is mounted. [2025-09-24 04:28:18.535] ubi2:dml_code is mounted. [2025-09-24 04:28:18.535] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:28:18.535] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:28:18.535] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:28:18.535] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:28:18.535] data.LB_FadeInType0=100 [2025-09-24 04:28:18.535] data.CHLH_FadeInType0=0 [2025-09-24 04:28:18.535] data.WU_FadeInDelay=0 [2025-09-24 04:28:18.535] max_time_out=0 [2025-09-24 04:28:18.535] No splash screen [2025-09-24 04:28:18.535] stop dss Done [2025-09-24 04:28:18.535] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:28:18.617] /dev/mem opened. [2025-09-24 04:28:18.617] Memory mapped at address 0xffff7f8a1000. [2025-09-24 04:28:18.617] Read at address 0x00600018 (0xffff7f8a1018): 0x00000000 [2025-09-24 04:28:18.617] Write at address 0x00600018 (0xffff7f8a1018): 0x00400040, readback 0x00400040 [2025-09-24 04:28:18.617] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:28:18.650] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:28:18.746] Loaded PowerVR consumer services. [2025-09-24 04:28:18.874] Waiting data available... [2025-09-24 04:28:18.890] 512+0 records in [2025-09-24 04:28:18.890] 512+0 records out [2025-09-24 04:28:18.921] Starting syslogd/klogd: done [2025-09-24 04:28:18.953] DML Start [2025-09-24 04:28:19.113] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:28:19.369] DML res1: 0 [2025-09-24 04:28:19.737] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:28:19.758] Read Success [2025-09-24 04:28:19.758] Verifying certificate... [2025-09-24 04:28:20.014] Verified OK [2025-09-24 04:28:20.029] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:28:21.852] Verified OK [2025-09-24 04:28:21.852] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:28:22.353] Verified OK [2025-09-24 04:28:22.353] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:28:24.814] fs.protected_hardlinks = 1 [2025-09-24 04:28:24.814] fs.protected_symlinks = 1 [2025-09-24 04:28:24.814] kernel.modules_disabled = 1 [2025-09-24 04:28:25.006] [2025-09-24 04:28:25.006] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:28:26.444] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:28:34.226] SBL1:1210.0.1.0 [2025-09-24 04:28:34.258] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:28:35.841] SBL2:1210.0.1.0 [2025-09-24 04:28:35.873] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:28:35.985] j-A [2025-09-24 04:28:43.359] The R5 Autosar Classic is running [2025-09-24 04:28:43.359] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:28:43.359] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:28:43.966] INIT: version 2.96 booting [2025-09-24 04:28:44.062] INIT: Entering runlevel: 5 [2025-09-24 04:28:44.222] mtd24 attached [2025-09-24 04:28:44.238] mtd28 attached [2025-09-24 04:28:44.254] mtd32 attached [2025-09-24 04:28:44.286] ubi0:textures is mounted. [2025-09-24 04:28:44.329] RTNETLINK answers: File exists [2025-09-24 04:28:44.329] ubi2:dml_code is mounted. [2025-09-24 04:28:44.329] ubi1:animations is mounted. [2025-09-24 04:28:44.329] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:28:44.329] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:28:44.329] data.LB_FadeInType0=100 [2025-09-24 04:28:44.361] data.CHLH_FadeInType0=0 [2025-09-24 04:28:44.361] data.WU_FadeInDelay=0 [2025-09-24 04:28:44.361] max_time_out=0 [2025-09-24 04:28:44.361] No splash screen [2025-09-24 04:28:44.361] stop dss Done [2025-09-24 04:28:44.361] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:28:44.361] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:28:44.361] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:28:44.428] /dev/mem opened. [2025-09-24 04:28:44.428] Memory mapped at address 0xffff9d311000. [2025-09-24 04:28:44.428] Read at address 0x00600018 (0xffff9d311018): 0x00000000 [2025-09-24 04:28:44.428] Write at address 0x00600018 (0xffff9d311018): 0x00400040, readback 0x00400040 [2025-09-24 04:28:44.491] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:28:44.491] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:28:44.650] Loaded PowerVR consumer services. [2025-09-24 04:28:44.731] Waiting data available... [2025-09-24 04:28:44.747] 512+0 records in [2025-09-24 04:28:44.747] 512+0 records out [2025-09-24 04:28:44.779] Starting syslogd/klogd: done [2025-09-24 04:28:44.795] DML Start [2025-09-24 04:28:44.987] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:28:45.226] DML res1: 0 [2025-09-24 04:28:45.650] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:28:45.650] Read Success [2025-09-24 04:28:45.650] Verifying certificate... [2025-09-24 04:28:45.874] Verified OK [2025-09-24 04:28:45.890] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:28:47.440] Verified OK [2025-09-24 04:28:47.440] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:28:48.136] Verified OK [2025-09-24 04:28:48.136] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:28:50.742] fs.protected_hardlinks = 1 [2025-09-24 04:28:50.742] fs.protected_symlinks = 1 [2025-09-24 04:28:50.758] kernel.modules_disabled = 1 [2025-09-24 04:28:50.950] [2025-09-24 04:28:50.950] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:28:52.321] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:29:00.072] SBL1:1210.0.1.0 [2025-09-24 04:29:00.104] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:29:01.687] SBL2:1210.0.1.0 [2025-09-24 04:29:01.719] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:29:01.831] j-A [2025-09-24 04:29:09.205] The R5 Autosar Classic is running [2025-09-24 04:29:09.205] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:29:09.205] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:29:09.813] INIT: version 2.96 booting [2025-09-24 04:29:09.924] INIT: Entering runlevel: 5 [2025-09-24 04:29:10.084] mtd24 attached [2025-09-24 04:29:10.084] mtd28 attached [2025-09-24 04:29:10.100] mtd32 attached [2025-09-24 04:29:10.149] RTNETLINK answers: File exists [2025-09-24 04:29:10.213] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:29:10.213] ubi1:animations is mounted. [2025-09-24 04:29:10.213] ubi0:textures is mounted. [2025-09-24 04:29:10.213] ubi2:dml_code is mounted. [2025-09-24 04:29:10.213] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:29:10.213] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:29:10.213] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:29:10.213] data.LB_FadeInType0=100 [2025-09-24 04:29:10.213] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:29:10.213] data.CHLH_FadeInType0=0 [2025-09-24 04:29:10.213] data.WU_FadeInDelay=0 [2025-09-24 04:29:10.213] max_time_out=0 [2025-09-24 04:29:10.213] No splash screen [2025-09-24 04:29:10.213] stop dss Done [2025-09-24 04:29:10.297] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:29:10.297] /dev/mem opened. [2025-09-24 04:29:10.297] Memory mapped at address 0xffffb8a3c000. [2025-09-24 04:29:10.297] Read at address 0x00600018 (0xffffb8a3c018): 0x00000000 [2025-09-24 04:29:10.297] Write at address 0x00600018 (0xffffb8a3c018): 0x00400040, readback 0x00400040 [2025-09-24 04:29:10.297] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:29:10.442] Loaded PowerVR consumer services. [2025-09-24 04:29:10.553] Waiting data available... [2025-09-24 04:29:10.569] 512+0 records in [2025-09-24 04:29:10.569] 512+0 records out [2025-09-24 04:29:10.601] Starting syslogd/klogd: done [2025-09-24 04:29:10.617] DML Start [2025-09-24 04:29:10.793] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:29:10.985] DML res1: 0 [2025-09-24 04:29:11.472] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:29:11.472] Read Success [2025-09-24 04:29:11.472] Verifying certificate... [2025-09-24 04:29:11.697] Verified OK [2025-09-24 04:29:11.712] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:29:13.392] Verified OK [2025-09-24 04:29:13.392] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:29:14.031] Verified OK [2025-09-24 04:29:14.031] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:29:16.605] fs.protected_hardlinks = 1 [2025-09-24 04:29:16.605] fs.protected_symlinks = 1 [2025-09-24 04:29:16.621] kernel.modules_disabled = 1 [2025-09-24 04:29:16.813] [2025-09-24 04:29:16.813] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:29:18.041] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:29:25.895] SBL1:1210.0.1.0 [2025-09-24 04:29:25.943] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:29:27.510] SBL2:1210.0.1.0 [2025-09-24 04:29:27.558] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:29:27.653] j-A [2025-09-24 04:29:35.009] The R5 Autosar Classic is running [2025-09-24 04:29:35.009] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:29:35.030] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:29:35.637] INIT: version 2.96 booting [2025-09-24 04:29:35.749] INIT: Entering runlevel: 5 [2025-09-24 04:29:35.909] mtd28 attached [2025-09-24 04:29:35.909] mtd24 attached [2025-09-24 04:29:35.925] mtd32 attached [2025-09-24 04:29:35.957] ubi0:animations is mounted. [2025-09-24 04:29:35.973] ubi1:textures is mounted. [2025-09-24 04:29:35.989] ubi2:dml_code is mounted. [2025-09-24 04:29:35.989] RTNETLINK answers: File exists [2025-09-24 04:29:36.053] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:29:36.053] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:29:36.053] data.LB_FadeInType0=100 [2025-09-24 04:29:36.053] data.CHLH_FadeInType0=0 [2025-09-24 04:29:36.053] data.WU_FadeInDelay=0 [2025-09-24 04:29:36.053] max_time_out=0 [2025-09-24 04:29:36.053] No splash screen [2025-09-24 04:29:36.053] stop dss Done [2025-09-24 04:29:36.053] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:29:36.053] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:29:36.053] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:29:36.089] /dev/mem opened. [2025-09-24 04:29:36.089] Memory mapped at address 0xffffbb828000. [2025-09-24 04:29:36.089] Read at address 0x00600018 (0xffffbb828018): 0x00000000 [2025-09-24 04:29:36.089] Write at address 0x00600018 (0xffffbb828018): 0x00400040, readback 0x00400040 [2025-09-24 04:29:36.137] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:29:36.154] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:29:36.233] Loaded PowerVR consumer services. [2025-09-24 04:29:36.361] Waiting data available... [2025-09-24 04:29:36.393] 512+0 records in [2025-09-24 04:29:36.393] 512+0 records out [2025-09-24 04:29:36.409] Starting syslogd/klogd: done [2025-09-24 04:29:36.424] DML Start [2025-09-24 04:29:36.617] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:29:36.840] DML res1: 0 [2025-09-24 04:29:37.304] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:29:37.325] Read Success [2025-09-24 04:29:37.325] Verifying certificate... [2025-09-24 04:29:37.565] Verified OK [2025-09-24 04:29:37.597] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:29:39.165] Verified OK [2025-09-24 04:29:39.165] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:29:39.804] Verified OK [2025-09-24 04:29:39.804] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:29:42.491] fs.protected_hardlinks = 1 [2025-09-24 04:29:42.507] fs.protected_symlinks = 1 [2025-09-24 04:29:42.507] kernel.modules_disabled = 1 [2025-09-24 04:29:42.715] [2025-09-24 04:29:42.715] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:29:43.846] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:29:51.725] SBL1:1210.0.1.0 [2025-09-24 04:29:51.757] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:29:53.340] SBL2:1210.0.1.0 [2025-09-24 04:29:53.371] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:29:53.484] j-A [2025-09-24 04:30:00.859] The R5 Autosar Classic is running [2025-09-24 04:30:00.859] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:30:00.859] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:30:01.467] INIT: version 2.96 booting [2025-09-24 04:30:01.578] INIT: Entering runlevel: 5 [2025-09-24 04:30:01.738] mtd28 attached [2025-09-24 04:30:01.738] mtd24 attached [2025-09-24 04:30:01.754] mtd32 attached [2025-09-24 04:30:01.786] ubi0:animations is mounted. [2025-09-24 04:30:01.859] RTNETLINK answers: File exists [2025-09-24 04:30:01.859] ubi2:dml_code is mounted. [2025-09-24 04:30:01.859] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:30:01.859] ubi1:textures is mounted. [2025-09-24 04:30:01.859] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:30:01.859] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:30:01.859] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:30:01.859] data.LB_FadeInType0=100 [2025-09-24 04:30:01.859] data.CHLH_FadeInType0=0 [2025-09-24 04:30:01.859] data.WU_FadeInDelay=0 [2025-09-24 04:30:01.859] max_time_out=0 [2025-09-24 04:30:01.859] No splash screen [2025-09-24 04:30:01.859] stop dss Done [2025-09-24 04:30:01.859] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:30:01.924] /dev/mem opened. [2025-09-24 04:30:01.924] Memory mapped at address 0xffff8bcb6000. [2025-09-24 04:30:01.924] Read at address 0x00600018 (0xffff8bcb6018): 0x00000000 [2025-09-24 04:30:01.924] Write at address 0x00600018 (0xffff8bcb6018): 0x00400040, readback 0x00400040 [2025-09-24 04:30:01.988] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:30:01.988] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:30:02.116] Loaded PowerVR consumer services. [2025-09-24 04:30:02.211] Waiting data available... [2025-09-24 04:30:02.243] 512+0 records in [2025-09-24 04:30:02.243] 512+0 records out [2025-09-24 04:30:02.292] Starting syslogd/klogd: done [2025-09-24 04:30:02.308] DML Start [2025-09-24 04:30:02.467] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:30:02.676] DML res1: 0 [2025-09-24 04:30:03.162] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:30:03.162] Read Success [2025-09-24 04:30:03.162] Verifying certificate... [2025-09-24 04:30:03.385] Verified OK [2025-09-24 04:30:03.401] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:30:05.113] Verified OK [2025-09-24 04:30:05.113] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:30:05.704] Verified OK [2025-09-24 04:30:05.704] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:30:08.262] fs.protected_hardlinks = 1 [2025-09-24 04:30:08.262] fs.protected_symlinks = 1 [2025-09-24 04:30:08.278] kernel.modules_disabled = 1 [2025-09-24 04:30:08.470] [2025-09-24 04:30:08.470] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:30:09.717] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:30:17.547] SBL1:1210.0.1.0 [2025-09-24 04:30:17.579] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:30:19.161] SBL2:1210.0.1.0 [2025-09-24 04:30:19.193] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:30:19.306] j-A [2025-09-24 04:30:26.659] The R5 Autosar Classic is running [2025-09-24 04:30:26.659] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:30:26.681] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:30:27.288] INIT: version 2.96 booting [2025-09-24 04:30:27.400] INIT: Entering runlevel: 5 [2025-09-24 04:30:27.544] mtd32 attached [2025-09-24 04:30:27.560] mtd28 attached [2025-09-24 04:30:27.560] mtd24 attached [2025-09-24 04:30:27.675] ubi0:dml_code is mounted. [2025-09-24 04:30:27.675] RTNETLINK answers: File exists [2025-09-24 04:30:27.675] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:30:27.675] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:30:27.675] ubi2:textures is mounted. [2025-09-24 04:30:27.675] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:30:27.675] ubi1:animations is mounted. [2025-09-24 04:30:27.675] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:30:27.675] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:30:27.675] data.LB_FadeInType0=100 [2025-09-24 04:30:27.675] data.CHLH_FadeInType0=0 [2025-09-24 04:30:27.675] data.WU_FadeInDelay=0 [2025-09-24 04:30:27.675] max_time_out=0 [2025-09-24 04:30:27.675] No splash screen [2025-09-24 04:30:27.675] stop dss Done [2025-09-24 04:30:27.706] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:30:27.750] /dev/mem opened. [2025-09-24 04:30:27.750] Memory mapped at address 0xffffa0103000. [2025-09-24 04:30:27.750] Read at address 0x00600018 (0xffffa0103018): 0x00000000 [2025-09-24 04:30:27.750] Write at address 0x00600018 (0xffffa0103018): 0x00400040, readback 0x00400040 [2025-09-24 04:30:27.750] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:30:27.847] Loaded PowerVR consumer services. [2025-09-24 04:30:28.006] Waiting data available... [2025-09-24 04:30:28.022] 512+0 records in [2025-09-24 04:30:28.022] 512+0 records out [2025-09-24 04:30:28.070] Starting syslogd/klogd: done [2025-09-24 04:30:28.086] DML Start [2025-09-24 04:30:28.262] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:30:28.486] DML res1: 0 [2025-09-24 04:30:28.961] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:30:28.961] Read Success [2025-09-24 04:30:28.961] Verifying certificate... [2025-09-24 04:30:29.218] Verified OK [2025-09-24 04:30:29.233] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:30:30.928] Verified OK [2025-09-24 04:30:30.928] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:30:31.545] Verified OK [2025-09-24 04:30:31.545] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:30:34.150] fs.protected_hardlinks = 1 [2025-09-24 04:30:34.166] fs.protected_symlinks = 1 [2025-09-24 04:30:34.166] kernel.modules_disabled = 1 [2025-09-24 04:30:34.358] [2025-09-24 04:30:34.358] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:30:35.505] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:30:43.389] SBL1:1210.0.1.0 [2025-09-24 04:30:43.437] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:30:45.003] SBL2:1210.0.1.0 [2025-09-24 04:30:45.051] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:30:45.148] j-A [2025-09-24 04:30:52.501] The R5 Autosar Classic is running [2025-09-24 04:30:52.524] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:30:52.524] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:30:53.131] INIT: version 2.96 booting [2025-09-24 04:30:53.244] INIT: Entering runlevel: 5 [2025-09-24 04:30:53.403] mtd24 attached [2025-09-24 04:30:53.403] mtd28 attached [2025-09-24 04:30:53.436] mtd32 attached [2025-09-24 04:30:53.436] ubi0:textures is mounted. [2025-09-24 04:30:53.468] ubi1:animations is mounted. [2025-09-24 04:30:53.529] RTNETLINK answers: File exists [2025-09-24 04:30:53.529] ubi2:dml_code is mounted. [2025-09-24 04:30:53.529] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:30:53.529] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:30:53.529] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:30:53.529] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:30:53.529] data.LB_FadeInType0=100 [2025-09-24 04:30:53.529] data.CHLH_FadeInType0=0 [2025-09-24 04:30:53.529] data.WU_FadeInDelay=0 [2025-09-24 04:30:53.529] max_time_out=0 [2025-09-24 04:30:53.529] No splash screen [2025-09-24 04:30:53.529] stop dss Done [2025-09-24 04:30:53.529] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:30:53.617] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:30:53.617] /dev/mem opened. [2025-09-24 04:30:53.617] Memory mapped at address 0xffff8534e000. [2025-09-24 04:30:53.617] Read at address 0x00600018 (0xffff8534e018): 0x00000000 [2025-09-24 04:30:53.617] Write at address 0x00600018 (0xffff8534e018): 0x00400040, readback 0x00400040 [2025-09-24 04:30:53.617] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:30:53.713] Loaded PowerVR consumer services. [2025-09-24 04:30:53.873] Waiting data available... [2025-09-24 04:30:53.889] 512+0 records in [2025-09-24 04:30:53.889] 512+0 records out [2025-09-24 04:30:53.905] Starting syslogd/klogd: done [2025-09-24 04:30:53.937] DML Start [2025-09-24 04:30:54.064] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:30:54.241] DML res1: 0 [2025-09-24 04:30:54.829] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:30:54.829] Read Success [2025-09-24 04:30:54.829] Verifying certificate... [2025-09-24 04:30:55.052] Verified OK [2025-09-24 04:30:55.068] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:30:56.760] Verified OK [2025-09-24 04:30:56.760] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:30:57.383] Verified OK [2025-09-24 04:30:57.383] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:30:59.909] fs.protected_hardlinks = 1 [2025-09-24 04:30:59.909] fs.protected_symlinks = 1 [2025-09-24 04:30:59.925] kernel.modules_disabled = 1 [2025-09-24 04:31:00.101] [2025-09-24 04:31:00.101] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:31:01.410] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:31:09.223] SBL1:1210.0.1.0 [2025-09-24 04:31:09.271] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:31:10.838] SBL2:1210.0.1.0 [2025-09-24 04:31:10.886] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:31:10.997] j-A [2025-09-24 04:31:18.367] The R5 Autosar Classic is running [2025-09-24 04:31:18.367] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:31:18.367] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:31:18.975] INIT: version 2.96 booting [2025-09-24 04:31:19.086] INIT: Entering runlevel: 5 [2025-09-24 04:31:19.230] mtd28 attached [2025-09-24 04:31:19.247] mtd24 attached [2025-09-24 04:31:19.247] mtd32 attached [2025-09-24 04:31:19.294] ubi0:animations is mounted. [2025-09-24 04:31:19.310] RTNETLINK answers: File exists [2025-09-24 04:31:19.359] ubi2:dml_code is mounted. [2025-09-24 04:31:19.359] ubi1:textures is mounted. [2025-09-24 04:31:19.359] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:31:19.359] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:31:19.359] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:31:19.359] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:31:19.359] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:31:19.359] data.LB_FadeInType0=100 [2025-09-24 04:31:19.359] data.CHLH_FadeInType0=0 [2025-09-24 04:31:19.359] data.WU_FadeInDelay=0 [2025-09-24 04:31:19.359] max_time_out=0 [2025-09-24 04:31:19.359] No splash screen [2025-09-24 04:31:19.359] stop dss Done [2025-09-24 04:31:19.433] /dev/mem opened. [2025-09-24 04:31:19.433] Memory mapped at address 0xffff92eba000. [2025-09-24 04:31:19.433] Read at address 0x00600018 (0xffff92eba018): 0x00000000 [2025-09-24 04:31:19.433] Write at address 0x00600018 (0xffff92eba018): 0x00400040, readback 0x00400040 [2025-09-24 04:31:19.433] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:31:19.433] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:31:19.609] Loaded PowerVR consumer services. [2025-09-24 04:31:19.721] Waiting data available... [2025-09-24 04:31:19.737] 512+0 records in [2025-09-24 04:31:19.737] 512+0 records out [2025-09-24 04:31:19.769] Starting syslogd/klogd: done [2025-09-24 04:31:19.785] DML Start [2025-09-24 04:31:19.930] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:31:20.201] DML res1: 0 [2025-09-24 04:31:20.643] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:31:20.643] Read Success [2025-09-24 04:31:20.643] Verifying certificate... [2025-09-24 04:31:20.867] Verified OK [2025-09-24 04:31:20.899] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:31:22.570] Verified OK [2025-09-24 04:31:22.570] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:31:23.146] Verified OK [2025-09-24 04:31:23.146] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:31:25.816] fs.protected_hardlinks = 1 [2025-09-24 04:31:25.831] fs.protected_symlinks = 1 [2025-09-24 04:31:25.831] kernel.modules_disabled = 1 [2025-09-24 04:31:26.024] [2025-09-24 04:31:26.024] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:31:27.223] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:31:35.040] SBL1:1210.0.1.0 [2025-09-24 04:31:35.088] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:31:36.654] SBL2:1210.0.1.0 [2025-09-24 04:31:36.702] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:31:36.815] j-A [2025-09-24 04:31:44.185] The R5 Autosar Classic is running [2025-09-24 04:31:44.185] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:31:44.185] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:31:44.792] INIT: version 2.96 booting [2025-09-24 04:31:44.888] INIT: Entering runlevel: 5 [2025-09-24 04:31:45.048] mtd28 attached [2025-09-24 04:31:45.064] mtd32 attached [2025-09-24 04:31:45.080] mtd24 attached [2025-09-24 04:31:45.128] ubi0:animations is mounted. [2025-09-24 04:31:45.128] RTNETLINK answers: File exists [2025-09-24 04:31:45.180] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:31:45.180] ubi1:dml_code is mounted. [2025-09-24 04:31:45.180] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:31:45.180] ubi2:textures is mounted. [2025-09-24 04:31:45.180] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:31:45.180] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:31:45.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:31:45.180] data.LB_FadeInType0=100 [2025-09-24 04:31:45.180] data.CHLH_FadeInType0=0 [2025-09-24 04:31:45.180] data.WU_FadeInDelay=0 [2025-09-24 04:31:45.180] max_time_out=0 [2025-09-24 04:31:45.180] No splash screen [2025-09-24 04:31:45.180] stop dss Done [2025-09-24 04:31:45.195] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:31:45.218] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:31:45.251] /dev/mem opened. [2025-09-24 04:31:45.251] Memory mapped at address 0xffffa7f04000. [2025-09-24 04:31:45.251] Read at address 0x00600018 (0xffffa7f04018): 0x00000000 [2025-09-24 04:31:45.251] Write at address 0x00600018 (0xffffa7f04018): 0x00400040, readback 0x00400040 [2025-09-24 04:31:45.412] Loaded PowerVR consumer services. [2025-09-24 04:31:45.524] Waiting data available... [2025-09-24 04:31:45.540] 512+0 records in [2025-09-24 04:31:45.540] 512+0 records out [2025-09-24 04:31:45.587] Starting syslogd/klogd: done [2025-09-24 04:31:45.604] DML Start [2025-09-24 04:31:45.764] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:31:46.003] DML res1: 0 [2025-09-24 04:31:46.387] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:31:46.387] Read Success [2025-09-24 04:31:46.402] Verifying certificate... [2025-09-24 04:31:46.642] Verified OK [2025-09-24 04:31:46.658] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:31:48.297] Verified OK [2025-09-24 04:31:48.297] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:31:48.852] Verified OK [2025-09-24 04:31:48.852] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:31:51.378] fs.protected_hardlinks = 1 [2025-09-24 04:31:51.378] fs.protected_symlinks = 1 [2025-09-24 04:31:51.394] kernel.modules_disabled = 1 [2025-09-24 04:31:51.569] [2025-09-24 04:31:51.569] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:31:53.020] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:32:00.879] SBL1:1210.0.1.0 [2025-09-24 04:32:00.927] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:32:02.494] SBL2:1210.0.1.0 [2025-09-24 04:32:02.541] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:32:02.653] j-A [2025-09-24 04:32:10.025] The R5 Autosar Classic is running [2025-09-24 04:32:10.025] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:32:10.025] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:32:10.632] INIT: version 2.96 booting [2025-09-24 04:32:10.743] INIT: Entering runlevel: 5 [2025-09-24 04:32:10.904] mtd24 attached [2025-09-24 04:32:10.920] mtd32 attached [2025-09-24 04:32:10.936] mtd28 attached [2025-09-24 04:32:10.936] ubi0:textures is mounted. [2025-09-24 04:32:10.952] ubi1:dml_code is mounted. [2025-09-24 04:32:11.033] RTNETLINK answers: File exists [2025-09-24 04:32:11.033] ubi2:animations is mounted. [2025-09-24 04:32:11.033] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:32:11.033] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:32:11.033] data.LB_FadeInType0=100 [2025-09-24 04:32:11.033] data.CHLH_FadeInType0=0 [2025-09-24 04:32:11.033] data.WU_FadeInDelay=0 [2025-09-24 04:32:11.033] max_time_out=0 [2025-09-24 04:32:11.033] No splash screen [2025-09-24 04:32:11.033] stop dss Done [2025-09-24 04:32:11.033] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:32:11.033] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:32:11.033] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:32:11.098] /dev/mem opened. [2025-09-24 04:32:11.098] Memory mapped at address 0xffff99137000. [2025-09-24 04:32:11.098] Read at address 0x00600018 (0xffff99137018): 0x00000000 [2025-09-24 04:32:11.098] Write at address 0x00600018 (0xffff99137018): 0x00400040, readback 0x00400040 [2025-09-24 04:32:11.098] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:32:11.098] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:32:11.210] Loaded PowerVR consumer services. [2025-09-24 04:32:11.354] Waiting data available... [2025-09-24 04:32:11.370] 512+0 records in [2025-09-24 04:32:11.370] 512+0 records out [2025-09-24 04:32:11.418] Starting syslogd/klogd: done [2025-09-24 04:32:11.434] DML Start [2025-09-24 04:32:11.594] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:32:11.817] DML res1: 0 [2025-09-24 04:32:12.277] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:32:12.277] Read Success [2025-09-24 04:32:12.277] Verifying certificate... [2025-09-24 04:32:12.500] Verified OK [2025-09-24 04:32:12.532] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:32:14.195] Verified OK [2025-09-24 04:32:14.195] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:32:14.908] Verified OK [2025-09-24 04:32:14.908] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:32:17.530] fs.protected_hardlinks = 1 [2025-09-24 04:32:17.530] fs.protected_symlinks = 1 [2025-09-24 04:32:17.546] kernel.modules_disabled = 1 [2025-09-24 04:32:17.738] [2025-09-24 04:32:17.738] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:32:18.865] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:32:26.726] SBL1:1210.0.1.0 [2025-09-24 04:32:26.758] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:32:28.342] SBL2:1210.0.1.0 [2025-09-24 04:32:28.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:32:28.485] j-A [2025-09-24 04:32:35.842] The R5 Autosar Classic is running [2025-09-24 04:32:35.842] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:32:35.863] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:32:36.469] INIT: version 2.96 booting [2025-09-24 04:32:36.581] INIT: Entering runlevel: 5 [2025-09-24 04:32:36.742] mtd32 attached [2025-09-24 04:32:36.742] mtd28 attached [2025-09-24 04:32:36.757] mtd24 attached [2025-09-24 04:32:36.843] RTNETLINK answers: File exists [2025-09-24 04:32:36.843] ubi0:dml_code is mounted. [2025-09-24 04:32:36.843] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:32:36.843] ubi1:animations is mounted. [2025-09-24 04:32:36.843] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:32:36.843] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:32:36.843] ubi2:textures is mounted. [2025-09-24 04:32:36.843] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:32:36.843] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:32:36.867] data.LB_FadeInType0=100 [2025-09-24 04:32:36.867] data.CHLH_FadeInType0=0 [2025-09-24 04:32:36.867] data.WU_FadeInDelay=0 [2025-09-24 04:32:36.867] max_time_out=0 [2025-09-24 04:32:36.867] No splash screen [2025-09-24 04:32:36.867] stop dss Done [2025-09-24 04:32:36.899] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:32:36.915] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:32:36.948] /dev/mem opened. [2025-09-24 04:32:36.948] Memory mapped at address 0xffff80830000. [2025-09-24 04:32:36.948] Read at address 0x00600018 (0xffff80830018): 0x00000000 [2025-09-24 04:32:36.948] Write at address 0x00600018 (0xffff80830018): 0x00400040, readback 0x00400040 [2025-09-24 04:32:37.028] Loaded PowerVR consumer services. [2025-09-24 04:32:37.204] Waiting data available... [2025-09-24 04:32:37.219] 512+0 records in [2025-09-24 04:32:37.219] 512+0 records out [2025-09-24 04:32:37.235] Starting syslogd/klogd: done [2025-09-24 04:32:37.267] DML Start [2025-09-24 04:32:37.460] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:32:37.683] DML res1: 0 [2025-09-24 04:32:38.095] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:32:38.095] Read Success [2025-09-24 04:32:38.095] Verifying certificate... [2025-09-24 04:32:38.366] Verified OK [2025-09-24 04:32:38.398] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:32:40.029] Verified OK [2025-09-24 04:32:40.045] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:32:40.650] Verified OK [2025-09-24 04:32:40.650] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:32:43.400] fs.protected_hardlinks = 1 [2025-09-24 04:32:43.400] fs.protected_symlinks = 1 [2025-09-24 04:32:43.416] kernel.modules_disabled = 1 [2025-09-24 04:32:43.607] [2025-09-24 04:32:43.607] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:32:44.758] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:32:52.551] SBL1:1210.0.1.0 [2025-09-24 04:32:52.583] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:32:54.166] SBL2:1210.0.1.0 [2025-09-24 04:32:54.197] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:32:54.310] j-A [2025-09-24 04:33:01.686] The R5 Autosar Classic is running [2025-09-24 04:33:01.686] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:33:01.686] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:33:02.294] INIT: version 2.96 booting [2025-09-24 04:33:02.406] INIT: Entering runlevel: 5 [2025-09-24 04:33:02.566] mtd28 attached [2025-09-24 04:33:02.582] mtd32 attached [2025-09-24 04:33:02.598] mtd24 attached [2025-09-24 04:33:02.630] ubi0:animations is mounted. [2025-09-24 04:33:02.646] RTNETLINK answers: File exists [2025-09-24 04:33:02.699] ubi2:textures is mounted. [2025-09-24 04:33:02.699] ubi1:dml_code is mounted. [2025-09-24 04:33:02.699] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:33:02.699] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:33:02.699] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:33:02.699] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:33:02.699] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:33:02.699] data.LB_FadeInType0=100 [2025-09-24 04:33:02.699] data.CHLH_FadeInType0=0 [2025-09-24 04:33:02.699] data.WU_FadeInDelay=0 [2025-09-24 04:33:02.699] max_time_out=0 [2025-09-24 04:33:02.699] No splash screen [2025-09-24 04:33:02.699] stop dss Done [2025-09-24 04:33:02.746] /dev/mem opened. [2025-09-24 04:33:02.746] Memory mapped at address 0xffff8755c000. [2025-09-24 04:33:02.797] Read at address 0x00600018 (0xffff8755c018): 0x00000000 [2025-09-24 04:33:02.797] Write at address 0x00600018 (0xffff8755c018): 0x00400040, readback 0x00400040 [2025-09-24 04:33:02.797] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:33:02.797] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:33:02.862] Loaded PowerVR consumer services. [2025-09-24 04:33:03.067] Waiting data available... [2025-09-24 04:33:03.067] 512+0 records in [2025-09-24 04:33:03.067] 512+0 records out [2025-09-24 04:33:03.099] Starting syslogd/klogd: done [2025-09-24 04:33:03.115] DML Start [2025-09-24 04:33:03.308] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:33:03.548] DML res1: 0 [2025-09-24 04:33:03.943] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:33:03.943] Read Success [2025-09-24 04:33:03.943] Verifying certificate... [2025-09-24 04:33:04.183] Verified OK [2025-09-24 04:33:04.199] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:33:05.734] Verified OK [2025-09-24 04:33:05.750] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:33:06.357] Verified OK [2025-09-24 04:33:06.357] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:33:09.059] fs.protected_hardlinks = 1 [2025-09-24 04:33:09.090] fs.protected_symlinks = 1 [2025-09-24 04:33:09.090] kernel.modules_disabled = 1 [2025-09-24 04:33:09.282] [2025-09-24 04:33:09.282] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:33:10.631] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:33:18.371] SBL1:1210.0.1.0 [2025-09-24 04:33:18.419] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:33:19.986] SBL2:1210.0.1.0 [2025-09-24 04:33:20.034] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:33:20.146] j-A [2025-09-24 04:33:27.486] The R5 Autosar Classic is running [2025-09-24 04:33:27.511] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:33:27.511] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:33:28.119] INIT: version 2.96 booting [2025-09-24 04:33:28.230] INIT: Entering runlevel: 5 [2025-09-24 04:33:28.391] mtd28 attached [2025-09-24 04:33:28.391] mtd32 attached [2025-09-24 04:33:28.407] mtd24 attached [2025-09-24 04:33:28.455] RTNETLINK answers: File exists [2025-09-24 04:33:28.500] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:33:28.500] ubi0:animations is mounted. [2025-09-24 04:33:28.500] ubi2:textures is mounted. [2025-09-24 04:33:28.500] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:33:28.500] ubi1:dml_code is mounted. [2025-09-24 04:33:28.500] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:33:28.500] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:33:28.500] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:33:28.524] data.LB_FadeInType0=100 [2025-09-24 04:33:28.524] data.CHLH_FadeInType0=0 [2025-09-24 04:33:28.524] data.WU_FadeInDelay=0 [2025-09-24 04:33:28.524] max_time_out=0 [2025-09-24 04:33:28.524] No splash screen [2025-09-24 04:33:28.524] stop dss Done [2025-09-24 04:33:28.573] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:33:28.604] /dev/mem opened. [2025-09-24 04:33:28.604] Memory mapped at address 0xffffbbf1f000. [2025-09-24 04:33:28.604] Read at address 0x00600018 (0xffffbbf1f018): 0x00000000 [2025-09-24 04:33:28.604] Write at address 0x00600018 (0xffffbbf1f018): 0x00400040, readback 0x00400040 [2025-09-24 04:33:28.604] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:33:28.860] Loaded PowerVR consumer services. [2025-09-24 04:33:28.876] Waiting data available... [2025-09-24 04:33:28.893] 512+0 records in [2025-09-24 04:33:28.893] 512+0 records out [2025-09-24 04:33:28.940] Starting syslogd/klogd: done [2025-09-24 04:33:28.956] DML Start [2025-09-24 04:33:29.116] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:33:29.340] DML res1: 0 [2025-09-24 04:33:29.756] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:33:29.772] Read Success [2025-09-24 04:33:29.772] Verifying certificate... [2025-09-24 04:33:30.044] Verified OK [2025-09-24 04:33:30.060] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:33:31.531] Verified OK [2025-09-24 04:33:31.531] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:33:32.138] Verified OK [2025-09-24 04:33:32.138] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:33:34.888] fs.protected_hardlinks = 1 [2025-09-24 04:33:34.888] fs.protected_symlinks = 1 [2025-09-24 04:33:34.904] kernel.modules_disabled = 1 [2025-09-24 04:33:35.096] [2025-09-24 04:33:35.096] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:33:36.406] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:33:44.192] SBL1:1210.0.1.0 [2025-09-24 04:33:44.240] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:33:45.806] SBL2:1210.0.1.0 [2025-09-24 04:33:45.854] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:33:45.950] j-A [2025-09-24 04:33:53.305] The R5 Autosar Classic is running [2025-09-24 04:33:53.305] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:33:53.327] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:33:53.934] INIT: version 2.96 booting [2025-09-24 04:33:54.046] INIT: Entering runlevel: 5 [2025-09-24 04:33:54.206] mtd28 attached [2025-09-24 04:33:54.206] mtd32 attached [2025-09-24 04:33:54.222] mtd24 attached [2025-09-24 04:33:54.254] ubi0:animations is mounted. [2025-09-24 04:33:54.270] RTNETLINK answers: File exists [2025-09-24 04:33:54.307] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:33:54.307] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:33:54.307] ubi2:textures is mounted. [2025-09-24 04:33:54.307] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:33:54.307] ubi1:dml_code is mounted. [2025-09-24 04:33:54.307] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:33:54.307] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:33:54.330] data.LB_FadeInType0=100 [2025-09-24 04:33:54.330] data.CHLH_FadeInType0=0 [2025-09-24 04:33:54.330] data.WU_FadeInDelay=0 [2025-09-24 04:33:54.330] max_time_out=0 [2025-09-24 04:33:54.330] No splash screen [2025-09-24 04:33:54.330] stop dss Done [2025-09-24 04:33:54.404] /dev/mem opened. [2025-09-24 04:33:54.404] Memory mapped at address 0xffffbc67b000. [2025-09-24 04:33:54.404] Read at address 0x00600018 (0xffffbc67b018): 0x00000000 [2025-09-24 04:33:54.404] Write at address 0x00600018 (0xffffbc67b018): 0x00400040, readback 0x00400040 [2025-09-24 04:33:54.404] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:33:54.404] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:33:54.500] Loaded PowerVR consumer services. [2025-09-24 04:33:54.676] Waiting data available... [2025-09-24 04:33:54.692] 512+0 records in [2025-09-24 04:33:54.692] 512+0 records out [2025-09-24 04:33:54.708] Starting syslogd/klogd: done [2025-09-24 04:33:54.740] DML Start [2025-09-24 04:33:54.916] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:33:55.107] DML res1: 0 [2025-09-24 04:33:55.603] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:33:55.624] Read Success [2025-09-24 04:33:55.624] Verifying certificate... [2025-09-24 04:33:55.832] Verified OK [2025-09-24 04:33:55.848] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:33:57.539] Verified OK [2025-09-24 04:33:57.539] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:33:58.147] Verified OK [2025-09-24 04:33:58.163] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:34:00.770] fs.protected_hardlinks = 1 [2025-09-24 04:34:00.770] fs.protected_symlinks = 1 [2025-09-24 04:34:00.786] kernel.modules_disabled = 1 [2025-09-24 04:34:00.977] [2025-09-24 04:34:00.977] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:34:02.167] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:34:10.027] SBL1:1210.0.1.0 [2025-09-24 04:34:10.059] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:34:11.642] SBL2:1210.0.1.0 [2025-09-24 04:34:11.674] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:34:11.786] j-A [2025-09-24 04:34:19.140] The R5 Autosar Classic is running [2025-09-24 04:34:19.140] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:34:19.161] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:34:19.769] INIT: version 2.96 booting [2025-09-24 04:34:19.881] INIT: Entering runlevel: 5 [2025-09-24 04:34:20.025] mtd28 attached [2025-09-24 04:34:20.041] mtd24 attached [2025-09-24 04:34:20.056] mtd32 attached [2025-09-24 04:34:20.157] RTNETLINK answers: File exists [2025-09-24 04:34:20.157] ubi0:animations is mounted. [2025-09-24 04:34:20.157] ubi1:textures is mounted. [2025-09-24 04:34:20.157] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:34:20.157] ubi2:dml_code is mounted. [2025-09-24 04:34:20.157] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:34:20.157] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:34:20.157] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:34:20.157] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:34:20.157] data.LB_FadeInType0=100 [2025-09-24 04:34:20.157] data.CHLH_FadeInType0=0 [2025-09-24 04:34:20.157] data.WU_FadeInDelay=0 [2025-09-24 04:34:20.157] max_time_out=0 [2025-09-24 04:34:20.157] No splash screen [2025-09-24 04:34:20.157] stop dss Done [2025-09-24 04:34:20.262] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:34:20.262] /dev/mem opened. [2025-09-24 04:34:20.262] Memory mapped at address 0xffffb89c0000. [2025-09-24 04:34:20.262] Read at address 0x00600018 (0xffffb89c0018): 0x00000000 [2025-09-24 04:34:20.262] Write at address 0x00600018 (0xffffb89c0018): 0x00400040, readback 0x00400040 [2025-09-24 04:34:20.262] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:34:20.423] Loaded PowerVR consumer services. [2025-09-24 04:34:20.519] Waiting data available... [2025-09-24 04:34:20.535] 512+0 records in [2025-09-24 04:34:20.535] 512+0 records out [2025-09-24 04:34:20.551] Starting syslogd/klogd: done [2025-09-24 04:34:20.582] DML Start [2025-09-24 04:34:20.759] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:34:20.982] DML res1: 0 [2025-09-24 04:34:21.438] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:34:21.438] Read Success [2025-09-24 04:34:21.438] Verifying certificate... [2025-09-24 04:34:21.662] Verified OK [2025-09-24 04:34:21.678] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:34:23.310] Verified OK [2025-09-24 04:34:23.310] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:34:23.981] Verified OK [2025-09-24 04:34:23.981] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:34:26.619] fs.protected_hardlinks = 1 [2025-09-24 04:34:26.619] fs.protected_symlinks = 1 [2025-09-24 04:34:26.635] kernel.modules_disabled = 1 [2025-09-24 04:34:26.827] [2025-09-24 04:34:26.827] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:34:27.994] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:34:35.863] SBL1:1210.0.1.0 [2025-09-24 04:34:35.895] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:34:37.477] SBL2:1210.0.1.0 [2025-09-24 04:34:37.509] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:34:37.622] j-A [2025-09-24 04:34:44.997] The R5 Autosar Classic is running [2025-09-24 04:34:44.997] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:34:44.997] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:34:45.605] INIT: version 2.96 booting [2025-09-24 04:34:45.717] INIT: Entering runlevel: 5 [2025-09-24 04:34:45.861] mtd24 attached [2025-09-24 04:34:45.876] mtd28 attached [2025-09-24 04:34:45.892] mtd32 attached [2025-09-24 04:34:45.908] ubi0:textures is mounted. [2025-09-24 04:34:45.940] RTNETLINK answers: File exists [2025-09-24 04:34:45.940] ubi1:animations is mounted. [2025-09-24 04:34:45.993] ubi2:dml_code is mounted. [2025-09-24 04:34:45.993] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:34:45.993] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:34:45.993] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:34:45.993] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:34:45.993] data.LB_FadeInType0=100 [2025-09-24 04:34:45.993] data.CHLH_FadeInType0=0 [2025-09-24 04:34:45.993] data.WU_FadeInDelay=0 [2025-09-24 04:34:45.993] max_time_out=0 [2025-09-24 04:34:45.993] No splash screen [2025-09-24 04:34:45.993] stop dss Done [2025-09-24 04:34:45.993] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:34:46.041] /dev/mem opened. [2025-09-24 04:34:46.041] Memory mapped at address 0xffffb5176000. [2025-09-24 04:34:46.074] Read at address 0x00600018 (0xffffb5176018): 0x00000000 [2025-09-24 04:34:46.074] Write at address 0x00600018 (0xffffb5176018): 0x00400040, readback 0x00400040 [2025-09-24 04:34:46.074] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:34:46.074] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:34:46.354] Waiting data available... [2025-09-24 04:34:46.354] Loaded PowerVR consumer services. [2025-09-24 04:34:46.370] 512+0 records in [2025-09-24 04:34:46.386] 512+0 records out [2025-09-24 04:34:46.418] Starting syslogd/klogd: done [2025-09-24 04:34:46.434] DML Start [2025-09-24 04:34:46.578] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:34:46.802] DML res1: 0 [2025-09-24 04:34:47.297] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:34:47.313] Read Success [2025-09-24 04:34:47.313] Verifying certificate... [2025-09-24 04:34:47.538] Verified OK [2025-09-24 04:34:47.554] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:34:49.232] Verified OK [2025-09-24 04:34:49.232] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:34:49.840] Verified OK [2025-09-24 04:34:49.840] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:34:52.383] fs.protected_hardlinks = 1 [2025-09-24 04:34:52.383] fs.protected_symlinks = 1 [2025-09-24 04:34:52.399] kernel.modules_disabled = 1 [2025-09-24 04:34:52.607] [2025-09-24 04:34:52.607] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:34:53.850] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:35:01.699] SBL1:1210.0.1.0 [2025-09-24 04:35:01.731] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:35:03.314] SBL2:1210.0.1.0 [2025-09-24 04:35:03.346] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:35:03.458] j-A [2025-09-24 04:35:10.832] The R5 Autosar Classic is running [2025-09-24 04:35:10.832] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:35:10.832] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:35:11.439] INIT: version 2.96 booting [2025-09-24 04:35:11.551] INIT: Entering runlevel: 5 [2025-09-24 04:35:11.711] mtd32 attached [2025-09-24 04:35:11.711] mtd28 attached [2025-09-24 04:35:11.728] mtd24 attached [2025-09-24 04:35:11.776] RTNETLINK answers: File exists [2025-09-24 04:35:11.846] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:35:11.846] ubi1:animations is mounted. [2025-09-24 04:35:11.846] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:35:11.846] ubi0:dml_code is mounted. [2025-09-24 04:35:11.846] ubi2:textures is mounted. [2025-09-24 04:35:11.846] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:35:11.846] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:35:11.846] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:35:11.846] data.LB_FadeInType0=100 [2025-09-24 04:35:11.846] data.CHLH_FadeInType0=0 [2025-09-24 04:35:11.846] data.WU_FadeInDelay=0 [2025-09-24 04:35:11.846] max_time_out=0 [2025-09-24 04:35:11.846] No splash screen [2025-09-24 04:35:11.846] stop dss Done [2025-09-24 04:35:11.915] /dev/mem opened. [2025-09-24 04:35:11.915] Memory mapped at address 0xffff9eb66000. [2025-09-24 04:35:11.915] Read at address 0x00600018 (0xffff9eb66018): 0x00000000 [2025-09-24 04:35:11.915] Write at address 0x00600018 (0xffff9eb66018): 0x00400040, readback 0x00400040 [2025-09-24 04:35:11.915] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:35:11.915] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:35:12.027] Loaded PowerVR consumer services. [2025-09-24 04:35:12.187] Waiting data available... [2025-09-24 04:35:12.203] 512+0 records in [2025-09-24 04:35:12.219] 512+0 records out [2025-09-24 04:35:12.235] Starting syslogd/klogd: done [2025-09-24 04:35:12.251] DML Start [2025-09-24 04:35:12.427] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:35:12.667] DML res1: 0 [2025-09-24 04:35:13.082] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:35:13.082] Read Success [2025-09-24 04:35:13.098] Verifying certificate... [2025-09-24 04:35:13.338] Verified OK [2025-09-24 04:35:13.354] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:35:14.911] Verified OK [2025-09-24 04:35:14.911] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:35:15.531] Verified OK [2025-09-24 04:35:15.531] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:35:18.329] fs.protected_hardlinks = 1 [2025-09-24 04:35:18.329] fs.protected_symlinks = 1 [2025-09-24 04:35:18.329] kernel.modules_disabled = 1 [2025-09-24 04:35:18.504] [2025-09-24 04:35:18.504] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:35:19.693] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:35:27.508] SBL1:1210.0.1.0 [2025-09-24 04:35:27.540] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:35:29.122] SBL2:1210.0.1.0 [2025-09-24 04:35:29.154] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:35:29.266] j-A [2025-09-24 04:35:36.640] The R5 Autosar Classic is running [2025-09-24 04:35:36.640] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:35:36.640] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:35:37.248] INIT: version 2.96 booting [2025-09-24 04:35:37.359] INIT: Entering runlevel: 5 [2025-09-24 04:35:37.503] mtd32 attached [2025-09-24 04:35:37.519] mtd28 attached [2025-09-24 04:35:37.535] mtd24 attached [2025-09-24 04:35:37.583] RTNETLINK answers: File exists [2025-09-24 04:35:37.645] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:35:37.645] ubi1:animations is mounted. [2025-09-24 04:35:37.645] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:35:37.645] ubi0:dml_code is mounted. [2025-09-24 04:35:37.645] ubi2:textures is mounted. [2025-09-24 04:35:37.645] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:35:37.645] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:35:37.645] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:35:37.645] data.LB_FadeInType0=100 [2025-09-24 04:35:37.645] data.CHLH_FadeInType0=0 [2025-09-24 04:35:37.645] data.WU_FadeInDelay=0 [2025-09-24 04:35:37.645] max_time_out=0 [2025-09-24 04:35:37.645] No splash screen [2025-09-24 04:35:37.645] stop dss Done [2025-09-24 04:35:37.687] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:35:37.687] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:35:37.727] /dev/mem opened. [2025-09-24 04:35:37.727] Memory mapped at address 0xffff93ea3000. [2025-09-24 04:35:37.727] Read at address 0x00600018 (0xffff93ea3018): 0x00000000 [2025-09-24 04:35:37.727] Write at address 0x00600018 (0xffff93ea3018): 0x00400040, readback 0x00400040 [2025-09-24 04:35:37.871] Loaded PowerVR consumer services. [2025-09-24 04:35:37.983] Waiting data available... [2025-09-24 04:35:37.999] 512+0 records in [2025-09-24 04:35:37.999] 512+0 records out [2025-09-24 04:35:38.031] Starting syslogd/klogd: done [2025-09-24 04:35:38.047] DML Start [2025-09-24 04:35:38.223] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:35:38.463] DML res1: 0 [2025-09-24 04:35:38.902] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:35:38.902] Read Success [2025-09-24 04:35:38.902] Verifying certificate... [2025-09-24 04:35:39.126] Verified OK [2025-09-24 04:35:39.142] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:35:40.932] Verified OK [2025-09-24 04:35:40.932] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:35:41.522] Verified OK [2025-09-24 04:35:41.522] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:35:44.001] fs.protected_hardlinks = 1 [2025-09-24 04:35:44.001] fs.protected_symlinks = 1 [2025-09-24 04:35:44.017] kernel.modules_disabled = 1 [2025-09-24 04:35:44.208] [2025-09-24 04:35:44.208] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:35:45.483] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:35:53.338] SBL1:1210.0.1.0 [2025-09-24 04:35:53.370] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:35:54.952] SBL2:1210.0.1.0 [2025-09-24 04:35:55.000] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:35:55.095] j-A [2025-09-24 04:36:02.451] The R5 Autosar Classic is running [2025-09-24 04:36:02.451] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:36:02.472] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:36:03.078] INIT: version 2.96 booting [2025-09-24 04:36:03.190] INIT: Entering runlevel: 5 [2025-09-24 04:36:03.335] mtd28 attached [2025-09-24 04:36:03.351] mtd32 attached [2025-09-24 04:36:03.351] mtd24 attached [2025-09-24 04:36:03.398] ubi0:animations is mounted. [2025-09-24 04:36:03.469] RTNETLINK answers: File exists [2025-09-24 04:36:03.469] ubi1:dml_code is mounted. [2025-09-24 04:36:03.469] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:36:03.469] ubi2:textures is mounted. [2025-09-24 04:36:03.469] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:36:03.469] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:36:03.469] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:36:03.469] data.LB_FadeInType0=100 [2025-09-24 04:36:03.469] data.CHLH_FadeInType0=0 [2025-09-24 04:36:03.469] data.WU_FadeInDelay=0 [2025-09-24 04:36:03.469] max_time_out=0 [2025-09-24 04:36:03.469] No splash screen [2025-09-24 04:36:03.469] stop dss Done [2025-09-24 04:36:03.469] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:36:03.545] /dev/mem opened. [2025-09-24 04:36:03.545] Memory mapped at address 0xffffb2910000. [2025-09-24 04:36:03.545] Read at address 0x00600018 (0xffffb2910018): 0x00000000 [2025-09-24 04:36:03.545] Write at address 0x00600018 (0xffffb2910018): 0x00400040, readback 0x00400040 [2025-09-24 04:36:03.545] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:36:03.545] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:36:03.832] Loaded PowerVR consumer services. [2025-09-24 04:36:03.864] Waiting data available... [2025-09-24 04:36:03.896] 512+0 records in [2025-09-24 04:36:03.896] 512+0 records out [2025-09-24 04:36:03.912] Starting syslogd/klogd: done [2025-09-24 04:36:03.928] DML Start [2025-09-24 04:36:04.104] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:36:04.391] DML res1: 0 [2025-09-24 04:36:04.704] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:36:04.704] Read Success [2025-09-24 04:36:04.704] Verifying certificate... [2025-09-24 04:36:04.928] Verified OK [2025-09-24 04:36:04.944] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:36:06.549] Verified OK [2025-09-24 04:36:06.549] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:36:07.117] Verified OK [2025-09-24 04:36:07.117] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:36:09.931] fs.protected_hardlinks = 1 [2025-09-24 04:36:09.947] fs.protected_symlinks = 1 [2025-09-24 04:36:09.947] kernel.modules_disabled = 1 [2025-09-24 04:36:10.155] [2025-09-24 04:36:10.155] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:36:11.385] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:36:19.140] SBL1:1210.0.1.0 [2025-09-24 04:36:19.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:36:20.755] SBL2:1210.0.1.0 [2025-09-24 04:36:20.803] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:36:20.899] j-A [2025-09-24 04:36:28.253] The R5 Autosar Classic is running [2025-09-24 04:36:28.277] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:36:28.277] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:36:28.885] INIT: version 2.96 booting [2025-09-24 04:36:28.996] INIT: Entering runlevel: 5 [2025-09-24 04:36:29.156] mtd32 attached [2025-09-24 04:36:29.156] mtd24 attached [2025-09-24 04:36:29.172] mtd28 attached [2025-09-24 04:36:29.220] RTNETLINK answers: File exists [2025-09-24 04:36:29.220] ubi1:textures is mounted. [2025-09-24 04:36:29.281] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:36:29.281] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:36:29.281] ubi0:dml_code is mounted. [2025-09-24 04:36:29.281] ubi2:animations is mounted. [2025-09-24 04:36:29.281] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:36:29.281] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:36:29.281] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:36:29.281] data.LB_FadeInType0=100 [2025-09-24 04:36:29.281] data.CHLH_FadeInType0=0 [2025-09-24 04:36:29.281] data.WU_FadeInDelay=0 [2025-09-24 04:36:29.281] max_time_out=0 [2025-09-24 04:36:29.281] No splash screen [2025-09-24 04:36:29.281] stop dss Done [2025-09-24 04:36:29.357] /dev/mem opened. [2025-09-24 04:36:29.357] Memory mapped at address 0xffff8ab93000. [2025-09-24 04:36:29.357] Read at address 0x00600018 (0xffff8ab93018): 0x00000000 [2025-09-24 04:36:29.357] Write at address 0x00600018 (0xffff8ab93018): 0x00400040, readback 0x00400040 [2025-09-24 04:36:29.357] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:36:29.357] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:36:29.517] Loaded PowerVR consumer services. [2025-09-24 04:36:29.629] Waiting data available... [2025-09-24 04:36:29.645] 512+0 records in [2025-09-24 04:36:29.645] 512+0 records out [2025-09-24 04:36:29.677] Starting syslogd/klogd: done [2025-09-24 04:36:29.693] DML Start [2025-09-24 04:36:29.837] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:36:30.013] DML res1: 0 [2025-09-24 04:36:30.580] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:36:30.580] Read Success [2025-09-24 04:36:30.580] Verifying certificate... [2025-09-24 04:36:30.819] Verified OK [2025-09-24 04:36:30.835] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:36:32.456] Verified OK [2025-09-24 04:36:32.456] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:36:32.993] Verified OK [2025-09-24 04:36:32.993] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:36:35.550] fs.protected_hardlinks = 1 [2025-09-24 04:36:35.550] fs.protected_symlinks = 1 [2025-09-24 04:36:35.566] kernel.modules_disabled = 1 [2025-09-24 04:36:35.758] [2025-09-24 04:36:35.758] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:36:37.117] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:36:44.950] SBL1:1210.0.1.0 [2025-09-24 04:36:44.982] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:36:46.565] SBL2:1210.0.1.0 [2025-09-24 04:36:46.613] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:36:46.709] j-A [2025-09-24 04:36:54.065] The R5 Autosar Classic is running [2025-09-24 04:36:54.065] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:36:54.086] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:36:54.693] INIT: version 2.96 booting [2025-09-24 04:36:54.804] INIT: Entering runlevel: 5 [2025-09-24 04:36:54.949] mtd28 attached [2025-09-24 04:36:54.965] mtd24 attached [2025-09-24 04:36:54.981] mtd32 attached [2025-09-24 04:36:54.996] ubi0:animations is mounted. [2025-09-24 04:36:55.028] RTNETLINK answers: File exists [2025-09-24 04:36:55.028] ubi1:textures is mounted. [2025-09-24 04:36:55.083] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:36:55.083] ubi2:dml_code is mounted. [2025-09-24 04:36:55.083] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:36:55.083] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:36:55.083] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:36:55.083] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:36:55.083] data.LB_FadeInType0=100 [2025-09-24 04:36:55.083] data.CHLH_FadeInType0=0 [2025-09-24 04:36:55.083] data.WU_FadeInDelay=0 [2025-09-24 04:36:55.083] max_time_out=0 [2025-09-24 04:36:55.083] No splash screen [2025-09-24 04:36:55.083] stop dss Done [2025-09-24 04:36:55.131] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:36:55.164] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:36:55.164] /dev/mem opened. [2025-09-24 04:36:55.164] Memory mapped at address 0xffff9de06000. [2025-09-24 04:36:55.164] Read at address 0x00600018 (0xffff9de06018): 0x00000000 [2025-09-24 04:36:55.164] Write at address 0x00600018 (0xffff9de06018): 0x00400040, readback 0x00400040 [2025-09-24 04:36:55.341] Loaded PowerVR consumer services. [2025-09-24 04:36:55.436] Waiting data available... [2025-09-24 04:36:55.468] 512+0 records in [2025-09-24 04:36:55.468] 512+0 records out [2025-09-24 04:36:55.500] Starting syslogd/klogd: done [2025-09-24 04:36:55.516] DML Start [2025-09-24 04:36:55.692] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:36:55.948] DML res1: 0 [2025-09-24 04:36:56.342] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:36:56.342] Read Success [2025-09-24 04:36:56.342] Verifying certificate... [2025-09-24 04:36:56.613] Verified OK [2025-09-24 04:36:56.629] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:36:58.340] Verified OK [2025-09-24 04:36:58.340] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:36:58.910] Verified OK [2025-09-24 04:36:58.910] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:37:01.532] fs.protected_hardlinks = 1 [2025-09-24 04:37:01.548] fs.protected_symlinks = 1 [2025-09-24 04:37:01.548] kernel.modules_disabled = 1 [2025-09-24 04:37:01.739] [2025-09-24 04:37:01.739] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:37:02.955] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:37:10.752] SBL1:1210.0.1.0 [2025-09-24 04:37:10.784] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:37:12.367] SBL2:1210.0.1.0 [2025-09-24 04:37:12.399] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:37:12.510] j-A [2025-09-24 04:37:19.884] The R5 Autosar Classic is running [2025-09-24 04:37:19.884] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:37:19.884] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:37:20.492] INIT: version 2.96 booting [2025-09-24 04:37:20.603] INIT: Entering runlevel: 5 [2025-09-24 04:37:20.748] mtd24 attached [2025-09-24 04:37:20.763] mtd32 attached [2025-09-24 04:37:20.763] mtd28 attached [2025-09-24 04:37:20.811] ubi0:textures is mounted. [2025-09-24 04:37:20.827] RTNETLINK answers: File exists [2025-09-24 04:37:20.884] ubi2:animations is mounted. [2025-09-24 04:37:20.884] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:37:20.884] ubi1:dml_code is mounted. [2025-09-24 04:37:20.884] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:37:20.884] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:37:20.884] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:37:20.884] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:37:20.884] data.LB_FadeInType0=100 [2025-09-24 04:37:20.884] data.CHLH_FadeInType0=0 [2025-09-24 04:37:20.884] data.WU_FadeInDelay=0 [2025-09-24 04:37:20.884] max_time_out=0 [2025-09-24 04:37:20.884] No splash screen [2025-09-24 04:37:20.884] stop dss Done [2025-09-24 04:37:20.932] /dev/mem opened. [2025-09-24 04:37:20.932] Memory mapped at address 0xffffa2bc8000. [2025-09-24 04:37:20.974] Read at address 0x00600018 (0xffffa2bc8018): 0x00000000 [2025-09-24 04:37:20.974] Write at address 0x00600018 (0xffffa2bc8018): 0x00400040, readback 0x00400040 [2025-09-24 04:37:20.974] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:37:20.974] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:37:21.087] Loaded PowerVR consumer services. [2025-09-24 04:37:21.230] Waiting data available... [2025-09-24 04:37:21.246] 512+0 records in [2025-09-24 04:37:21.246] 512+0 records out [2025-09-24 04:37:21.294] Starting syslogd/klogd: done [2025-09-24 04:37:21.309] DML Start [2025-09-24 04:37:21.518] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:37:21.694] DML res1: 0 [2025-09-24 04:37:22.155] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:37:22.155] Read Success [2025-09-24 04:37:22.155] Verifying certificate... [2025-09-24 04:37:22.379] Verified OK [2025-09-24 04:37:22.411] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:37:24.026] Verified OK [2025-09-24 04:37:24.026] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:37:24.660] Verified OK [2025-09-24 04:37:24.660] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:37:27.234] fs.protected_hardlinks = 1 [2025-09-24 04:37:27.234] fs.protected_symlinks = 1 [2025-09-24 04:37:27.250] kernel.modules_disabled = 1 [2025-09-24 04:37:27.442] [2025-09-24 04:37:27.442] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:37:28.744] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:37:36.585] SBL1:1210.0.1.0 [2025-09-24 04:37:36.617] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:37:38.199] SBL2:1210.0.1.0 [2025-09-24 04:37:38.231] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:37:38.343] j-A [2025-09-24 04:37:45.718] The R5 Autosar Classic is running [2025-09-24 04:37:45.718] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:37:45.718] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:37:46.325] INIT: version 2.96 booting [2025-09-24 04:37:46.438] INIT: Entering runlevel: 5 [2025-09-24 04:37:46.597] mtd32 attached [2025-09-24 04:37:46.613] mtd28 attached [2025-09-24 04:37:46.613] mtd24 attached [2025-09-24 04:37:46.645] ubi0:dml_code is mounted. [2025-09-24 04:37:46.661] ubi1:animations is mounted. [2025-09-24 04:37:46.728] RTNETLINK answers: File exists [2025-09-24 04:37:46.728] ubi2:textures is mounted. [2025-09-24 04:37:46.728] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:37:46.728] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:37:46.728] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:37:46.728] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:37:46.728] data.LB_FadeInType0=100 [2025-09-24 04:37:46.728] data.CHLH_FadeInType0=0 [2025-09-24 04:37:46.728] data.WU_FadeInDelay=0 [2025-09-24 04:37:46.728] max_time_out=0 [2025-09-24 04:37:46.728] No splash screen [2025-09-24 04:37:46.728] stop dss Done [2025-09-24 04:37:46.728] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:37:46.790] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:37:46.790] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:37:46.790] /dev/mem opened. [2025-09-24 04:37:46.790] Memory mapped at address 0xffff842d8000. [2025-09-24 04:37:46.790] Read at address 0x00600018 (0xffff842d8018): 0x00000000 [2025-09-24 04:37:46.790] Write at address 0x00600018 (0xffff842d8018): 0x00400040, readback 0x00400040 [2025-09-24 04:37:46.934] Loaded PowerVR consumer services. [2025-09-24 04:37:47.063] Waiting data available... [2025-09-24 04:37:47.078] 512+0 records in [2025-09-24 04:37:47.078] 512+0 records out [2025-09-24 04:37:47.126] Starting syslogd/klogd: done [2025-09-24 04:37:47.142] DML Start [2025-09-24 04:37:47.317] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:37:47.541] DML res1: 0 [2025-09-24 04:37:47.972] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:37:47.972] Read Success [2025-09-24 04:37:47.972] Verifying certificate... [2025-09-24 04:37:48.228] Verified OK [2025-09-24 04:37:48.244] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:37:49.900] Verified OK [2025-09-24 04:37:49.900] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:37:50.497] Verified OK [2025-09-24 04:37:50.497] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:37:53.151] fs.protected_hardlinks = 1 [2025-09-24 04:37:53.167] fs.protected_symlinks = 1 [2025-09-24 04:37:53.167] kernel.modules_disabled = 1 [2025-09-24 04:37:53.374] [2025-09-24 04:37:53.374] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:37:54.549] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:38:02.398] SBL1:1210.0.1.0 [2025-09-24 04:38:02.430] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:38:04.013] SBL2:1210.0.1.0 [2025-09-24 04:38:04.045] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:38:04.157] j-A [2025-09-24 04:38:11.532] The R5 Autosar Classic is running [2025-09-24 04:38:11.532] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:38:11.532] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:38:12.139] INIT: version 2.96 booting [2025-09-24 04:38:12.251] INIT: Entering runlevel: 5 [2025-09-24 04:38:12.411] mtd24 attached [2025-09-24 04:38:12.411] mtd28 attached [2025-09-24 04:38:12.427] mtd32 attached [2025-09-24 04:38:12.474] RTNETLINK answers: File exists [2025-09-24 04:38:12.534] ubi1:animations is mounted. [2025-09-24 04:38:12.534] ubi0:textures is mounted. [2025-09-24 04:38:12.534] ubi2:dml_code is mounted. [2025-09-24 04:38:12.534] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:38:12.534] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:38:12.534] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:38:12.534] data.LB_FadeInType0=100 [2025-09-24 04:38:12.534] data.CHLH_FadeInType0=0 [2025-09-24 04:38:12.534] data.WU_FadeInDelay=0 [2025-09-24 04:38:12.534] max_time_out=0 [2025-09-24 04:38:12.534] No splash screen [2025-09-24 04:38:12.534] stop dss Done [2025-09-24 04:38:12.534] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:38:12.549] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:38:12.615] /dev/mem opened. [2025-09-24 04:38:12.615] Memory mapped at address 0xffffaedd1000. [2025-09-24 04:38:12.615] Read at address 0x00600018 (0xffffaedd1018): 0x00000000 [2025-09-24 04:38:12.615] Write at address 0x00600018 (0xffffaedd1018): 0x00400040, readback 0x00400040 [2025-09-24 04:38:12.647] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:38:12.663] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:38:12.839] Loaded PowerVR consumer services. [2025-09-24 04:38:12.919] Waiting data available... [2025-09-24 04:38:12.936] 512+0 records in [2025-09-24 04:38:12.936] 512+0 records out [2025-09-24 04:38:12.968] Starting syslogd/klogd: done [2025-09-24 04:38:12.984] DML Start [2025-09-24 04:38:13.160] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:38:13.399] DML res1: 0 [2025-09-24 04:38:13.874] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:38:13.874] Read Success [2025-09-24 04:38:13.874] Verifying certificate... [2025-09-24 04:38:14.113] Verified OK [2025-09-24 04:38:14.129] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:38:15.791] Verified OK [2025-09-24 04:38:15.791] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:38:16.362] Verified OK [2025-09-24 04:38:16.362] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:38:18.889] fs.protected_hardlinks = 1 [2025-09-24 04:38:18.905] fs.protected_symlinks = 1 [2025-09-24 04:38:18.921] kernel.modules_disabled = 1 [2025-09-24 04:38:19.112] [2025-09-24 04:38:19.112] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:38:20.444] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:38:28.225] SBL1:1210.0.1.0 [2025-09-24 04:38:28.273] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:38:29.840] SBL2:1210.0.1.0 [2025-09-24 04:38:29.888] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:38:29.999] j-A [2025-09-24 04:38:37.371] The R5 Autosar Classic is running [2025-09-24 04:38:37.371] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:38:37.371] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:38:37.978] INIT: version 2.96 booting [2025-09-24 04:38:38.090] INIT: Entering runlevel: 5 [2025-09-24 04:38:38.234] mtd32 attached [2025-09-24 04:38:38.250] mtd24 attached [2025-09-24 04:38:38.250] mtd28 attached [2025-09-24 04:38:38.349] RTNETLINK answers: File exists [2025-09-24 04:38:38.349] ubi0:dml_code is mounted. [2025-09-24 04:38:38.349] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:38:38.349] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:38:38.349] ubi2:animations is mounted. [2025-09-24 04:38:38.349] ubi1:textures is mounted. [2025-09-24 04:38:38.349] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:38:38.349] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:38:38.349] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:38:38.369] data.LB_FadeInType0=100 [2025-09-24 04:38:38.369] data.CHLH_FadeInType0=0 [2025-09-24 04:38:38.369] data.WU_FadeInDelay=0 [2025-09-24 04:38:38.369] max_time_out=0 [2025-09-24 04:38:38.369] No splash screen [2025-09-24 04:38:38.369] stop dss Done [2025-09-24 04:38:38.401] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:38:38.417] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:38:38.417] /dev/mem opened. [2025-09-24 04:38:38.451] Memory mapped at address 0xffffaa3fd000. [2025-09-24 04:38:38.451] Read at address 0x00600018 (0xffffaa3fd018): 0x00000000 [2025-09-24 04:38:38.451] Write at address 0x00600018 (0xffffaa3fd018): 0x00400040, readback 0x00400040 [2025-09-24 04:38:38.675] Loaded PowerVR consumer services. [2025-09-24 04:38:38.739] Waiting data available... [2025-09-24 04:38:38.755] 512+0 records in [2025-09-24 04:38:38.755] 512+0 records out [2025-09-24 04:38:38.787] Starting syslogd/klogd: done [2025-09-24 04:38:38.803] DML Start [2025-09-24 04:38:38.979] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:38:39.219] DML res1: 0 [2025-09-24 04:38:39.610] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:38:39.610] Read Success [2025-09-24 04:38:39.610] Verifying certificate... [2025-09-24 04:38:39.833] Verified OK [2025-09-24 04:38:39.849] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:38:41.576] Verified OK [2025-09-24 04:38:41.576] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:38:42.164] Verified OK [2025-09-24 04:38:42.164] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:38:44.818] fs.protected_hardlinks = 1 [2025-09-24 04:38:44.818] fs.protected_symlinks = 1 [2025-09-24 04:38:44.834] kernel.modules_disabled = 1 [2025-09-24 04:38:45.027] [2025-09-24 04:38:45.027] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:38:46.282] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:38:54.058] SBL1:1210.0.1.0 [2025-09-24 04:38:54.106] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:38:55.674] SBL2:1210.0.1.0 [2025-09-24 04:38:55.722] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:38:55.833] j-A [2025-09-24 04:39:03.172] The R5 Autosar Classic is running [2025-09-24 04:39:03.197] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:39:03.197] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:39:03.804] INIT: version 2.96 booting [2025-09-24 04:39:03.915] INIT: Entering runlevel: 5 [2025-09-24 04:39:04.076] mtd24 attached [2025-09-24 04:39:04.076] mtd28 attached [2025-09-24 04:39:04.092] mtd32 attached [2025-09-24 04:39:04.140] RTNETLINK answers: File exists [2025-09-24 04:39:04.186] ubi0:textures is mounted. [2025-09-24 04:39:04.186] ubi1:animations is mounted. [2025-09-24 04:39:04.186] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:39:04.186] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:39:04.186] ubi2:dml_code is mounted. [2025-09-24 04:39:04.186] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:39:04.186] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:39:04.186] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:39:04.186] data.LB_FadeInType0=100 [2025-09-24 04:39:04.207] data.CHLH_FadeInType0=0 [2025-09-24 04:39:04.207] data.WU_FadeInDelay=0 [2025-09-24 04:39:04.207] max_time_out=0 [2025-09-24 04:39:04.207] No splash screen [2025-09-24 04:39:04.207] stop dss Done [2025-09-24 04:39:04.255] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:39:04.295] /dev/mem opened. [2025-09-24 04:39:04.295] Memory mapped at address 0xffff923f6000. [2025-09-24 04:39:04.295] Read at address 0x00600018 (0xffff923f6018): 0x00000000 [2025-09-24 04:39:04.295] Write at address 0x00600018 (0xffff923f6018): 0x00400040, readback 0x00400040 [2025-09-24 04:39:04.295] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:39:04.440] Loaded PowerVR consumer services. [2025-09-24 04:39:04.567] Waiting data available... [2025-09-24 04:39:04.583] 512+0 records in [2025-09-24 04:39:04.583] 512+0 records out [2025-09-24 04:39:04.631] Starting syslogd/klogd: done [2025-09-24 04:39:04.647] DML Start [2025-09-24 04:39:04.840] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:39:05.047] DML res1: 0 [2025-09-24 04:39:05.504] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:39:05.504] Read Success [2025-09-24 04:39:05.504] Verifying certificate... [2025-09-24 04:39:05.728] Verified OK [2025-09-24 04:39:05.744] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:39:07.383] Verified OK [2025-09-24 04:39:07.383] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:39:08.006] Verified OK [2025-09-24 04:39:08.006] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:39:10.708] fs.protected_hardlinks = 1 [2025-09-24 04:39:10.724] fs.protected_symlinks = 1 [2025-09-24 04:39:10.724] kernel.modules_disabled = 1 [2025-09-24 04:39:10.916] [2025-09-24 04:39:10.916] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:39:12.065] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:39:19.878] SBL1:1210.0.1.0 [2025-09-24 04:39:19.926] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:39:21.493] SBL2:1210.0.1.0 [2025-09-24 04:39:21.541] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:39:21.637] j-A [2025-09-24 04:39:28.990] The R5 Autosar Classic is running [2025-09-24 04:39:29.015] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:39:29.015] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:39:29.623] INIT: version 2.96 booting [2025-09-24 04:39:29.735] INIT: Entering runlevel: 5 [2025-09-24 04:39:29.879] mtd24 attached [2025-09-24 04:39:29.895] mtd28 attached [2025-09-24 04:39:29.911] mtd32 attached [2025-09-24 04:39:29.926] ubi0:textures is mounted. [2025-09-24 04:39:29.959] RTNETLINK answers: File exists [2025-09-24 04:39:30.012] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:39:30.012] ubi1:animations is mounted. [2025-09-24 04:39:30.012] ubi2:dml_code is mounted. [2025-09-24 04:39:30.012] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:39:30.012] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:39:30.012] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:39:30.012] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:39:30.012] data.LB_FadeInType0=100 [2025-09-24 04:39:30.012] data.CHLH_FadeInType0=0 [2025-09-24 04:39:30.012] data.WU_FadeInDelay=0 [2025-09-24 04:39:30.012] max_time_out=0 [2025-09-24 04:39:30.012] No splash screen [2025-09-24 04:39:30.012] stop dss Done [2025-09-24 04:39:30.087] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:39:30.087] /dev/mem opened. [2025-09-24 04:39:30.087] Memory mapped at address 0xffff7fc22000. [2025-09-24 04:39:30.087] Read at address 0x00600018 (0xffff7fc22018): 0x00000000 [2025-09-24 04:39:30.087] Write at address 0x00600018 (0xffff7fc22018): 0x00400040, readback 0x00400040 [2025-09-24 04:39:30.087] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:39:30.263] Loaded PowerVR consumer services. [2025-09-24 04:39:30.360] Waiting data available... [2025-09-24 04:39:30.391] 512+0 records in [2025-09-24 04:39:30.391] 512+0 records out [2025-09-24 04:39:30.423] Starting syslogd/klogd: done [2025-09-24 04:39:30.439] DML Start [2025-09-24 04:39:30.615] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:39:30.806] DML res1: 0 [2025-09-24 04:39:31.255] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:39:31.271] Read Success [2025-09-24 04:39:31.271] Verifying certificate... [2025-09-24 04:39:31.543] Verified OK [2025-09-24 04:39:31.559] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:39:33.251] Verified OK [2025-09-24 04:39:33.251] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:39:33.858] Verified OK [2025-09-24 04:39:33.858] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:39:36.449] fs.protected_hardlinks = 1 [2025-09-24 04:39:36.465] fs.protected_symlinks = 1 [2025-09-24 04:39:36.465] kernel.modules_disabled = 1 [2025-09-24 04:39:36.657] [2025-09-24 04:39:36.657] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:39:37.863] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:39:45.687] SBL1:1210.0.1.0 [2025-09-24 04:39:45.735] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:39:47.301] SBL2:1210.0.1.0 [2025-09-24 04:39:47.349] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:39:47.461] j-A [2025-09-24 04:39:54.799] The R5 Autosar Classic is running [2025-09-24 04:39:54.824] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:39:54.824] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:39:55.432] INIT: version 2.96 booting [2025-09-24 04:39:55.543] INIT: Entering runlevel: 5 [2025-09-24 04:39:55.704] mtd24 attached [2025-09-24 04:39:55.704] mtd28 attached [2025-09-24 04:39:55.719] mtd32 attached [2025-09-24 04:39:55.767] ubi0:textures is mounted. [2025-09-24 04:39:55.802] RTNETLINK answers: File exists [2025-09-24 04:39:55.802] ubi1:animations is mounted. [2025-09-24 04:39:55.802] ubi2:dml_code is mounted. [2025-09-24 04:39:55.802] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:39:55.802] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:39:55.840] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:39:55.840] data.LB_FadeInType0=100 [2025-09-24 04:39:55.840] data.CHLH_FadeInType0=0 [2025-09-24 04:39:55.840] data.WU_FadeInDelay=0 [2025-09-24 04:39:55.840] max_time_out=0 [2025-09-24 04:39:55.840] No splash screen [2025-09-24 04:39:55.840] stop dss Done [2025-09-24 04:39:55.840] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:39:55.840] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:39:55.872] /dev/mem opened. [2025-09-24 04:39:55.898] Memory mapped at address 0xffffa2259000. [2025-09-24 04:39:55.898] Read at address 0x00600018 (0xffffa2259018): 0x00000000 [2025-09-24 04:39:55.898] Write at address 0x00600018 (0xffffa2259018): 0x00400040, readback 0x00400040 [2025-09-24 04:39:55.944] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:39:55.944] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:39:56.055] Loaded PowerVR consumer services. [2025-09-24 04:39:56.167] Waiting data available... [2025-09-24 04:39:56.200] 512+0 records in [2025-09-24 04:39:56.200] 512+0 records out [2025-09-24 04:39:56.247] Starting syslogd/klogd: done [2025-09-24 04:39:56.263] DML Start [2025-09-24 04:39:56.455] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:39:56.694] DML res1: 0 [2025-09-24 04:39:57.078] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:39:57.099] Read Success [2025-09-24 04:39:57.099] Verifying certificate... [2025-09-24 04:39:57.371] Verified OK [2025-09-24 04:39:57.387] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:39:59.200] Verified OK [2025-09-24 04:39:59.200] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:39:59.727] Verified OK [2025-09-24 04:39:59.727] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:40:02.238] fs.protected_hardlinks = 1 [2025-09-24 04:40:02.238] fs.protected_symlinks = 1 [2025-09-24 04:40:02.254] kernel.modules_disabled = 1 [2025-09-24 04:40:02.445] [2025-09-24 04:40:02.445] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:40:03.772] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:40:11.489] SBL1:1210.0.1.0 [2025-09-24 04:40:11.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:40:13.104] SBL2:1210.0.1.0 [2025-09-24 04:40:13.151] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:40:13.247] j-A [2025-09-24 04:40:20.602] The R5 Autosar Classic is running [2025-09-24 04:40:20.626] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:40:20.626] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:40:21.234] INIT: version 2.96 booting [2025-09-24 04:40:21.345] INIT: Entering runlevel: 5 [2025-09-24 04:40:21.505] mtd24 attached [2025-09-24 04:40:21.505] mtd28 attached [2025-09-24 04:40:21.537] mtd32 attached [2025-09-24 04:40:21.553] ubi0:textures is mounted. [2025-09-24 04:40:21.601] ubi1:animations is mounted. [2025-09-24 04:40:21.601] RTNETLINK answers: File exists [2025-09-24 04:40:21.601] ubi2:dml_code is mounted. [2025-09-24 04:40:21.601] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:40:21.601] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:40:21.633] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:40:21.633] data.LB_FadeInType0=100 [2025-09-24 04:40:21.633] data.CHLH_FadeInType0=0 [2025-09-24 04:40:21.633] data.WU_FadeInDelay=0 [2025-09-24 04:40:21.633] max_time_out=0 [2025-09-24 04:40:21.633] No splash screen [2025-09-24 04:40:21.633] stop dss Done [2025-09-24 04:40:21.633] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:40:21.633] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:40:21.681] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:40:21.722] /dev/mem opened. [2025-09-24 04:40:21.722] Memory mapped at address 0xffffa919b000. [2025-09-24 04:40:21.722] Read at address 0x00600018 (0xffffa919b018): 0x00000000 [2025-09-24 04:40:21.722] Write at address 0x00600018 (0xffffa919b018): 0x00400040, readback 0x00400040 [2025-09-24 04:40:21.722] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:40:21.801] Loaded PowerVR consumer services. [2025-09-24 04:40:21.978] Waiting data available... [2025-09-24 04:40:21.994] 512+0 records in [2025-09-24 04:40:21.994] 512+0 records out [2025-09-24 04:40:22.042] Starting syslogd/klogd: done [2025-09-24 04:40:22.058] DML Start [2025-09-24 04:40:22.250] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:40:22.473] DML res1: 0 [2025-09-24 04:40:22.867] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:40:22.867] Read Success [2025-09-24 04:40:22.867] Verifying certificate... [2025-09-24 04:40:23.091] Verified OK [2025-09-24 04:40:23.107] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:40:24.769] Verified OK [2025-09-24 04:40:24.769] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:40:25.354] Verified OK [2025-09-24 04:40:25.354] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:40:27.880] fs.protected_hardlinks = 1 [2025-09-24 04:40:27.908] fs.protected_symlinks = 1 [2025-09-24 04:40:27.908] kernel.modules_disabled = 1 [2025-09-24 04:40:28.084] [2025-09-24 04:40:28.084] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:40:29.468] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:40:37.303] SBL1:1210.0.1.0 [2025-09-24 04:40:37.335] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:40:38.917] SBL2:1210.0.1.0 [2025-09-24 04:40:38.965] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:40:39.061] j-A [2025-09-24 04:40:46.416] The R5 Autosar Classic is running [2025-09-24 04:40:46.416] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:40:46.437] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:40:47.045] INIT: version 2.96 booting [2025-09-24 04:40:47.156] INIT: Entering runlevel: 5 [2025-09-24 04:40:47.316] mtd32 attached [2025-09-24 04:40:47.316] mtd24 attached [2025-09-24 04:40:47.316] mtd28 attached [2025-09-24 04:40:47.348] ubi0:dml_code is mounted. [2025-09-24 04:40:47.381] RTNETLINK answers: File exists [2025-09-24 04:40:47.381] ubi1:textures is mounted. [2025-09-24 04:40:47.440] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:40:47.440] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:40:47.440] ubi2:animations is mounted. [2025-09-24 04:40:47.440] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:40:47.440] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:40:47.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:40:47.440] data.LB_FadeInType0=100 [2025-09-24 04:40:47.440] data.CHLH_FadeInType0=0 [2025-09-24 04:40:47.440] data.WU_FadeInDelay=0 [2025-09-24 04:40:47.440] max_time_out=0 [2025-09-24 04:40:47.440] No splash screen [2025-09-24 04:40:47.440] stop dss Done [2025-09-24 04:40:47.513] /dev/mem opened. [2025-09-24 04:40:47.513] Memory mapped at address 0xffffa35e9000. [2025-09-24 04:40:47.513] Read at address 0x00600018 (0xffffa35e9018): 0x00000000 [2025-09-24 04:40:47.513] Write at address 0x00600018 (0xffffa35e9018): 0x00400040, readback 0x00400040 [2025-09-24 04:40:47.513] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:40:47.529] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:40:47.753] Loaded PowerVR consumer services. [2025-09-24 04:40:47.769] Waiting data available... [2025-09-24 04:40:47.801] 512+0 records in [2025-09-24 04:40:47.801] 512+0 records out [2025-09-24 04:40:47.849] Starting syslogd/klogd: done [2025-09-24 04:40:47.865] DML Start [2025-09-24 04:40:48.025] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:40:48.249] DML res1: 0 [2025-09-24 04:40:48.697] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:40:48.713] Read Success [2025-09-24 04:40:48.713] Verifying certificate... [2025-09-24 04:40:48.968] Verified OK [2025-09-24 04:40:48.984] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:40:50.534] Verified OK [2025-09-24 04:40:50.534] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:40:51.188] Verified OK [2025-09-24 04:40:51.188] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:40:53.873] fs.protected_hardlinks = 1 [2025-09-24 04:40:53.873] fs.protected_symlinks = 1 [2025-09-24 04:40:53.889] kernel.modules_disabled = 1 [2025-09-24 04:40:54.081] [2025-09-24 04:40:54.081] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:40:55.300] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:41:03.110] SBL1:1210.0.1.0 [2025-09-24 04:41:03.142] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:41:04.725] SBL2:1210.0.1.0 [2025-09-24 04:41:04.773] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:41:04.869] j-A [2025-09-24 04:41:12.224] The R5 Autosar Classic is running [2025-09-24 04:41:12.224] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:41:12.245] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:41:12.853] INIT: version 2.96 booting [2025-09-24 04:41:12.964] INIT: Entering runlevel: 5 [2025-09-24 04:41:13.108] mtd24 attached [2025-09-24 04:41:13.124] mtd28 attached [2025-09-24 04:41:13.140] mtd32 attached [2025-09-24 04:41:13.172] ubi0:textures is mounted. [2025-09-24 04:41:13.188] RTNETLINK answers: File exists [2025-09-24 04:41:13.251] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:41:13.251] ubi1:animations is mounted. [2025-09-24 04:41:13.251] ubi2:dml_code is mounted. [2025-09-24 04:41:13.251] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:41:13.251] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:41:13.251] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:41:13.251] data.LB_FadeInType0=100 [2025-09-24 04:41:13.251] data.CHLH_FadeInType0=0 [2025-09-24 04:41:13.251] data.WU_FadeInDelay=0 [2025-09-24 04:41:13.251] max_time_out=0 [2025-09-24 04:41:13.251] No splash screen [2025-09-24 04:41:13.251] stop dss Done [2025-09-24 04:41:13.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:41:13.299] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:41:13.332] /dev/mem opened. [2025-09-24 04:41:13.332] Memory mapped at address 0xffff9637f000. [2025-09-24 04:41:13.332] Read at address 0x00600018 (0xffff9637f018): 0x00000000 [2025-09-24 04:41:13.332] Write at address 0x00600018 (0xffff9637f018): 0x00400040, readback 0x00400040 [2025-09-24 04:41:13.332] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:41:13.428] Loaded PowerVR consumer services. [2025-09-24 04:41:13.587] Waiting data available... [2025-09-24 04:41:13.620] 512+0 records in [2025-09-24 04:41:13.620] 512+0 records out [2025-09-24 04:41:13.668] Starting syslogd/klogd: done [2025-09-24 04:41:13.684] DML Start [2025-09-24 04:41:13.860] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:41:14.083] DML res1: 0 [2025-09-24 04:41:14.483] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:41:14.499] Read Success [2025-09-24 04:41:14.499] Verifying certificate... [2025-09-24 04:41:14.771] Verified OK [2025-09-24 04:41:14.787] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:41:16.478] Verified OK [2025-09-24 04:41:16.478] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:41:17.125] Verified OK [2025-09-24 04:41:17.125] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:41:19.747] fs.protected_hardlinks = 1 [2025-09-24 04:41:19.747] fs.protected_symlinks = 1 [2025-09-24 04:41:19.762] kernel.modules_disabled = 1 [2025-09-24 04:41:19.955] [2025-09-24 04:41:19.955] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:41:21.096] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:41:28.924] SBL1:1210.0.1.0 [2025-09-24 04:41:28.972] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:41:30.539] SBL2:1210.0.1.0 [2025-09-24 04:41:30.586] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:41:30.682] j-A [2025-09-24 04:41:38.038] The R5 Autosar Classic is running [2025-09-24 04:41:38.061] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:41:38.061] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:41:38.668] INIT: version 2.96 booting [2025-09-24 04:41:38.781] INIT: Entering runlevel: 5 [2025-09-24 04:41:38.941] mtd32 attached [2025-09-24 04:41:38.957] mtd24 attached [2025-09-24 04:41:38.957] mtd28 attached [2025-09-24 04:41:38.988] ubi0:dml_code is mounted. [2025-09-24 04:41:39.004] RTNETLINK answers: File exists [2025-09-24 04:41:39.053] ubi2:animations is mounted. [2025-09-24 04:41:39.053] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:41:39.053] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:41:39.053] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:41:39.053] ubi1:textures is mounted. [2025-09-24 04:41:39.053] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:41:39.053] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:41:39.078] data.LB_FadeInType0=100 [2025-09-24 04:41:39.078] data.CHLH_FadeInType0=0 [2025-09-24 04:41:39.078] data.WU_FadeInDelay=0 [2025-09-24 04:41:39.078] max_time_out=0 [2025-09-24 04:41:39.078] No splash screen [2025-09-24 04:41:39.078] stop dss Done [2025-09-24 04:41:39.101] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:41:39.101] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:41:39.150] /dev/mem opened. [2025-09-24 04:41:39.150] Memory mapped at address 0xffff8f404000. [2025-09-24 04:41:39.150] Read at address 0x00600018 (0xffff8f404018): 0x00000000 [2025-09-24 04:41:39.150] Write at address 0x00600018 (0xffff8f404018): 0x00400040, readback 0x00400040 [2025-09-24 04:41:39.325] Loaded PowerVR consumer services. [2025-09-24 04:41:39.436] Waiting data available... [2025-09-24 04:41:39.469] 512+0 records in [2025-09-24 04:41:39.469] 512+0 records out [2025-09-24 04:41:39.501] Starting syslogd/klogd: done [2025-09-24 04:41:39.517] DML Start [2025-09-24 04:41:39.693] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:41:39.965] DML res1: 0 [2025-09-24 04:41:40.377] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:41:40.377] Read Success [2025-09-24 04:41:40.377] Verifying certificate... [2025-09-24 04:41:40.601] Verified OK [2025-09-24 04:41:40.633] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:41:42.280] Verified OK [2025-09-24 04:41:42.280] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:41:42.902] Verified OK [2025-09-24 04:41:42.902] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:41:45.476] fs.protected_hardlinks = 1 [2025-09-24 04:41:45.492] fs.protected_symlinks = 1 [2025-09-24 04:41:45.492] kernel.modules_disabled = 1 [2025-09-24 04:41:45.700] [2025-09-24 04:41:45.700] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:41:47.007] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:41:54.734] SBL1:1210.0.1.0 [2025-09-24 04:41:54.782] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:41:56.349] SBL2:1210.0.1.0 [2025-09-24 04:41:56.398] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:41:56.510] j-A [2025-09-24 04:42:03.849] The R5 Autosar Classic is running [2025-09-24 04:42:03.880] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:42:03.880] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:42:04.488] INIT: version 2.96 booting [2025-09-24 04:42:04.599] INIT: Entering runlevel: 5 [2025-09-24 04:42:04.744] mtd32 attached [2025-09-24 04:42:04.760] mtd28 attached [2025-09-24 04:42:04.760] mtd24 attached [2025-09-24 04:42:04.824] RTNETLINK answers: File exists [2025-09-24 04:42:04.824] ubi2:textures is mounted. [2025-09-24 04:42:04.824] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:42:04.881] ubi1:animations is mounted. [2025-09-24 04:42:04.881] ubi0:dml_code is mounted. [2025-09-24 04:42:04.881] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:42:04.881] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:42:04.881] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:42:04.881] data.LB_FadeInType0=100 [2025-09-24 04:42:04.881] data.CHLH_FadeInType0=0 [2025-09-24 04:42:04.881] data.WU_FadeInDelay=0 [2025-09-24 04:42:04.881] max_time_out=0 [2025-09-24 04:42:04.881] No splash screen [2025-09-24 04:42:04.881] stop dss Done [2025-09-24 04:42:04.881] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:42:04.971] /dev/mem opened. [2025-09-24 04:42:04.971] Memory mapped at address 0xffff9512c000. [2025-09-24 04:42:04.971] Read at address 0x00600018 (0xffff9512c018): 0x00000000 [2025-09-24 04:42:04.971] Write at address 0x00600018 (0xffff9512c018): 0x00400040, readback 0x00400040 [2025-09-24 04:42:04.971] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:42:04.971] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:42:05.067] Loaded PowerVR consumer services. [2025-09-24 04:42:05.228] Waiting data available... [2025-09-24 04:42:05.259] 512+0 records in [2025-09-24 04:42:05.259] 512+0 records out [2025-09-24 04:42:05.275] Starting syslogd/klogd: done [2025-09-24 04:42:05.291] DML Start [2025-09-24 04:42:05.452] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:42:05.739] DML res1: 0 [2025-09-24 04:42:06.101] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:42:06.101] Read Success [2025-09-24 04:42:06.101] Verifying certificate... [2025-09-24 04:42:06.373] Verified OK [2025-09-24 04:42:06.389] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:42:08.078] Verified OK [2025-09-24 04:42:08.078] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:42:08.674] Verified OK [2025-09-24 04:42:08.674] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:42:11.327] fs.protected_hardlinks = 1 [2025-09-24 04:42:11.343] fs.protected_symlinks = 1 [2025-09-24 04:42:11.343] kernel.modules_disabled = 1 [2025-09-24 04:42:11.551] [2025-09-24 04:42:11.551] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:42:12.715] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:42:20.532] SBL1:1210.0.1.0 [2025-09-24 04:42:20.564] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:42:22.146] SBL2:1210.0.1.0 [2025-09-24 04:42:22.178] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:42:22.290] j-A [2025-09-24 04:42:29.665] The R5 Autosar Classic is running [2025-09-24 04:42:29.665] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:42:29.665] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:42:30.273] INIT: version 2.96 booting [2025-09-24 04:42:30.385] INIT: Entering runlevel: 5 [2025-09-24 04:42:30.545] mtd32 attached [2025-09-24 04:42:30.545] mtd24 attached [2025-09-24 04:42:30.561] mtd28 attached [2025-09-24 04:42:30.609] RTNETLINK answers: File exists [2025-09-24 04:42:30.651] ubi1:textures is mounted. [2025-09-24 04:42:30.651] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:42:30.651] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:42:30.651] ubi2:animations is mounted. [2025-09-24 04:42:30.651] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:42:30.651] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:42:30.651] ubi0:dml_code is mounted. [2025-09-24 04:42:30.651] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:42:30.681] data.LB_FadeInType0=100 [2025-09-24 04:42:30.681] data.CHLH_FadeInType0=0 [2025-09-24 04:42:30.681] data.WU_FadeInDelay=0 [2025-09-24 04:42:30.681] max_time_out=0 [2025-09-24 04:42:30.681] No splash screen [2025-09-24 04:42:30.681] stop dss Done [2025-09-24 04:42:30.696] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:42:30.696] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:42:30.753] /dev/mem opened. [2025-09-24 04:42:30.753] Memory mapped at address 0xffffbe2d2000. [2025-09-24 04:42:30.753] Read at address 0x00600018 (0xffffbe2d2018): 0x00000000 [2025-09-24 04:42:30.753] Write at address 0x00600018 (0xffffbe2d2018): 0x00400040, readback 0x00400040 [2025-09-24 04:42:30.928] Loaded PowerVR consumer services. [2025-09-24 04:42:31.041] Waiting data available... [2025-09-24 04:42:31.057] 512+0 records in [2025-09-24 04:42:31.057] 512+0 records out [2025-09-24 04:42:31.073] Starting syslogd/klogd: done [2025-09-24 04:42:31.089] DML Start [2025-09-24 04:42:31.281] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:42:31.488] DML res1: 0 [2025-09-24 04:42:31.958] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:42:31.958] Read Success [2025-09-24 04:42:31.958] Verifying certificate... [2025-09-24 04:42:32.198] Verified OK [2025-09-24 04:42:32.214] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:42:33.930] Verified OK [2025-09-24 04:42:33.930] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:42:34.545] Verified OK [2025-09-24 04:42:34.545] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:42:37.071] fs.protected_hardlinks = 1 [2025-09-24 04:42:37.071] fs.protected_symlinks = 1 [2025-09-24 04:42:37.087] kernel.modules_disabled = 1 [2025-09-24 04:42:37.280] [2025-09-24 04:42:37.280] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:42:38.514] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:42:46.314] SBL1:1210.0.1.0 [2025-09-24 04:42:46.362] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:42:47.928] SBL2:1210.0.1.0 [2025-09-24 04:42:47.976] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:42:48.087] j-A [2025-09-24 04:42:55.460] The R5 Autosar Classic is running [2025-09-24 04:42:55.460] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:42:55.460] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:42:56.068] INIT: version 2.96 booting [2025-09-24 04:42:56.179] INIT: Entering runlevel: 5 [2025-09-24 04:42:56.339] mtd32 attached [2025-09-24 04:42:56.339] mtd28 attached [2025-09-24 04:42:56.355] mtd24 attached [2025-09-24 04:42:56.403] ubi0:dml_code is mounted. [2025-09-24 04:42:56.403] RTNETLINK answers: File exists [2025-09-24 04:42:56.463] ubi2:textures is mounted. [2025-09-24 04:42:56.463] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:42:56.463] ubi1:animations is mounted. [2025-09-24 04:42:56.463] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:42:56.463] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:42:56.463] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:42:56.463] data.LB_FadeInType0=100 [2025-09-24 04:42:56.463] data.CHLH_FadeInType0=0 [2025-09-24 04:42:56.463] data.WU_FadeInDelay=0 [2025-09-24 04:42:56.463] max_time_out=0 [2025-09-24 04:42:56.463] No splash screen [2025-09-24 04:42:56.463] stop dss Done [2025-09-24 04:42:56.463] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:42:56.495] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:42:56.543] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:42:56.543] /dev/mem opened. [2025-09-24 04:42:56.543] Memory mapped at address 0xffff92d59000. [2025-09-24 04:42:56.543] Read at address 0x00600018 (0xffff92d59018): 0x00000000 [2025-09-24 04:42:56.543] Write at address 0x00600018 (0xffff92d59018): 0x00400040, readback 0x00400040 [2025-09-24 04:42:56.654] Loaded PowerVR consumer services. [2025-09-24 04:42:56.815] Waiting data available... [2025-09-24 04:42:56.830] 512+0 records in [2025-09-24 04:42:56.830] 512+0 records out [2025-09-24 04:42:56.878] Starting syslogd/klogd: done [2025-09-24 04:42:56.894] DML Start [2025-09-24 04:42:57.053] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:42:57.278] DML res1: 0 [2025-09-24 04:42:57.741] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:42:57.741] Read Success [2025-09-24 04:42:57.741] Verifying certificate... [2025-09-24 04:42:57.980] Verified OK [2025-09-24 04:42:57.996] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:42:59.589] Verified OK [2025-09-24 04:42:59.590] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:43:00.206] Verified OK [2025-09-24 04:43:00.206] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:43:02.765] fs.protected_hardlinks = 1 [2025-09-24 04:43:02.765] fs.protected_symlinks = 1 [2025-09-24 04:43:02.781] kernel.modules_disabled = 1 [2025-09-24 04:43:02.989] [2025-09-24 04:43:02.989] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:43:04.310] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:43:12.125] SBL1:1210.0.1.0 [2025-09-24 04:43:12.156] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:43:13.739] SBL2:1210.0.1.0 [2025-09-24 04:43:13.771] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:43:13.882] j-A [2025-09-24 04:43:21.257] The R5 Autosar Classic is running [2025-09-24 04:43:21.257] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:43:21.257] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:43:21.864] INIT: version 2.96 booting [2025-09-24 04:43:21.976] INIT: Entering runlevel: 5 [2025-09-24 04:43:22.120] mtd24 attached [2025-09-24 04:43:22.137] mtd28 attached [2025-09-24 04:43:22.153] mtd32 attached [2025-09-24 04:43:22.169] ubi0:textures is mounted. [2025-09-24 04:43:22.201] RTNETLINK answers: File exists [2025-09-24 04:43:22.259] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:43:22.259] ubi2:dml_code is mounted. [2025-09-24 04:43:22.259] ubi1:animations is mounted. [2025-09-24 04:43:22.259] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:43:22.259] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:43:22.259] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:43:22.259] data.LB_FadeInType0=100 [2025-09-24 04:43:22.259] data.CHLH_FadeInType0=0 [2025-09-24 04:43:22.259] data.WU_FadeInDelay=0 [2025-09-24 04:43:22.259] max_time_out=0 [2025-09-24 04:43:22.259] No splash screen [2025-09-24 04:43:22.259] stop dss Done [2025-09-24 04:43:22.259] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:43:22.338] /dev/mem opened. [2025-09-24 04:43:22.338] Memory mapped at address 0xffff9cb61000. [2025-09-24 04:43:22.338] Read at address 0x00600018 (0xffff9cb61018): 0x00000000 [2025-09-24 04:43:22.338] Write at address 0x00600018 (0xffff9cb61018): 0x00400040, readback 0x00400040 [2025-09-24 04:43:22.338] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:43:22.338] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:43:22.594] Loaded PowerVR consumer services. [2025-09-24 04:43:22.610] Waiting data available... [2025-09-24 04:43:22.658] 512+0 records in [2025-09-24 04:43:22.658] 512+0 records out [2025-09-24 04:43:22.690] Starting syslogd/klogd: done [2025-09-24 04:43:22.706] DML Start [2025-09-24 04:43:22.866] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:43:23.073] DML res1: 0 [2025-09-24 04:43:23.577] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:43:23.577] Read Success [2025-09-24 04:43:23.577] Verifying certificate... [2025-09-24 04:43:23.801] Verified OK [2025-09-24 04:43:23.817] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:43:25.361] Verified OK [2025-09-24 04:43:25.361] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:43:25.937] Verified OK [2025-09-24 04:43:25.937] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:43:28.656] fs.protected_hardlinks = 1 [2025-09-24 04:43:28.656] fs.protected_symlinks = 1 [2025-09-24 04:43:28.672] kernel.modules_disabled = 1 [2025-09-24 04:43:28.864] [2025-09-24 04:43:28.864] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:43:30.137] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:43:37.914] SBL1:1210.0.1.0 [2025-09-24 04:43:37.946] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:43:39.529] SBL2:1210.0.1.0 [2025-09-24 04:43:39.561] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:43:39.672] j-A [2025-09-24 04:43:47.026] The R5 Autosar Classic is running [2025-09-24 04:43:47.026] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:43:47.047] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:43:47.655] INIT: version 2.96 booting [2025-09-24 04:43:47.767] INIT: Entering runlevel: 5 [2025-09-24 04:43:47.911] mtd24 attached [2025-09-24 04:43:47.927] mtd28 attached [2025-09-24 04:43:47.943] mtd32 attached [2025-09-24 04:43:48.025] RTNETLINK answers: File exists [2025-09-24 04:43:48.025] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:43:48.025] ubi0:textures is mounted. [2025-09-24 04:43:48.025] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:43:48.025] ubi1:animations is mounted. [2025-09-24 04:43:48.025] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:43:48.025] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:43:48.025] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:43:48.025] ubi2:dml_code is mounted. [2025-09-24 04:43:48.041] data.LB_FadeInType0=100 [2025-09-24 04:43:48.041] data.CHLH_FadeInType0=0 [2025-09-24 04:43:48.041] data.WU_FadeInDelay=0 [2025-09-24 04:43:48.062] max_time_out=0 [2025-09-24 04:43:48.062] No splash screen [2025-09-24 04:43:48.062] stop dss Done [2025-09-24 04:43:48.062] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:43:48.089] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:43:48.127] /dev/mem opened. [2025-09-24 04:43:48.127] Memory mapped at address 0xffffb51ec000. [2025-09-24 04:43:48.127] Read at address 0x00600018 (0xffffb51ec018): 0x00000000 [2025-09-24 04:43:48.127] Write at address 0x00600018 (0xffffb51ec018): 0x00400040, readback 0x00400040 [2025-09-24 04:43:48.302] Loaded PowerVR consumer services. [2025-09-24 04:43:48.399] Waiting data available... [2025-09-24 04:43:48.415] 512+0 records in [2025-09-24 04:43:48.415] 512+0 records out [2025-09-24 04:43:48.446] Starting syslogd/klogd: done [2025-09-24 04:43:48.462] DML Start [2025-09-24 04:43:48.686] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:43:48.926] DML res1: 0 [2025-09-24 04:43:49.230] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:43:49.230] Read Success [2025-09-24 04:43:49.245] Verifying certificate... [2025-09-24 04:43:49.470] Verified OK [2025-09-24 04:43:49.485] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:43:51.140] Verified OK [2025-09-24 04:43:51.140] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:43:51.729] Verified OK [2025-09-24 04:43:51.729] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:43:54.528] fs.protected_hardlinks = 1 [2025-09-24 04:43:54.528] fs.protected_symlinks = 1 [2025-09-24 04:43:54.544] kernel.modules_disabled = 1 [2025-09-24 04:43:54.735] [2025-09-24 04:43:54.735] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:43:55.960] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:44:03.717] SBL1:1210.0.1.0 [2025-09-24 04:44:03.764] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:44:05.331] SBL2:1210.0.1.0 [2025-09-24 04:44:05.379] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:44:05.492] j-A [2025-09-24 04:44:12.861] The R5 Autosar Classic is running [2025-09-24 04:44:12.861] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:44:12.861] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:44:13.468] INIT: version 2.96 booting [2025-09-24 04:44:13.581] INIT: Entering runlevel: 5 [2025-09-24 04:44:13.740] mtd32 attached [2025-09-24 04:44:13.740] mtd24 attached [2025-09-24 04:44:13.756] mtd28 attached [2025-09-24 04:44:13.804] RTNETLINK answers: File exists [2025-09-24 04:44:13.872] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:44:13.872] ubi0:dml_code is mounted. [2025-09-24 04:44:13.872] ubi1:textures is mounted. [2025-09-24 04:44:13.872] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:44:13.872] ubi2:animations is mounted. [2025-09-24 04:44:13.872] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:44:13.872] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:44:13.872] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:44:13.872] data.LB_FadeInType0=100 [2025-09-24 04:44:13.872] data.CHLH_FadeInType0=0 [2025-09-24 04:44:13.872] data.WU_FadeInDelay=0 [2025-09-24 04:44:13.872] max_time_out=0 [2025-09-24 04:44:13.872] No splash screen [2025-09-24 04:44:13.872] stop dss Done [2025-09-24 04:44:13.945] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:44:13.945] /dev/mem opened. [2025-09-24 04:44:13.945] Memory mapped at address 0xffff803cb000. [2025-09-24 04:44:13.945] Read at address 0x00600018 (0xffff803cb018): 0x00000000 [2025-09-24 04:44:13.945] Write at address 0x00600018 (0xffff803cb018): 0x00400040, readback 0x00400040 [2025-09-24 04:44:13.945] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:44:14.073] Loaded PowerVR consumer services. [2025-09-24 04:44:14.217] Waiting data available... [2025-09-24 04:44:14.249] 512+0 records in [2025-09-24 04:44:14.249] 512+0 records out [2025-09-24 04:44:14.281] Starting syslogd/klogd: done [2025-09-24 04:44:14.297] DML Start [2025-09-24 04:44:14.505] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:44:14.697] DML res1: 0 [2025-09-24 04:44:15.110] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:44:15.110] Read Success [2025-09-24 04:44:15.110] Verifying certificate... [2025-09-24 04:44:15.334] Verified OK [2025-09-24 04:44:15.350] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:44:16.929] Verified OK [2025-09-24 04:44:16.929] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:44:17.553] Verified OK [2025-09-24 04:44:17.553] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:44:20.288] fs.protected_hardlinks = 1 [2025-09-24 04:44:20.288] fs.protected_symlinks = 1 [2025-09-24 04:44:20.304] kernel.modules_disabled = 1 [2025-09-24 04:44:20.496] [2025-09-24 04:44:20.496] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:44:21.768] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:44:29.526] SBL1:1210.0.1.0 [2025-09-24 04:44:29.573] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:44:31.140] SBL2:1210.0.1.0 [2025-09-24 04:44:31.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:44:31.300] j-A [2025-09-24 04:44:38.670] The R5 Autosar Classic is running [2025-09-24 04:44:38.670] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:44:38.670] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:44:39.277] INIT: version 2.96 booting [2025-09-24 04:44:39.389] INIT: Entering runlevel: 5 [2025-09-24 04:44:39.533] mtd32 attached [2025-09-24 04:44:39.549] mtd28 attached [2025-09-24 04:44:39.549] mtd24 attached [2025-09-24 04:44:39.612] RTNETLINK answers: File exists [2025-09-24 04:44:39.612] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:44:39.676] ubi0:dml_code is mounted. [2025-09-24 04:44:39.676] ubi2:textures is mounted. [2025-09-24 04:44:39.676] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:44:39.676] ubi1:animations is mounted. [2025-09-24 04:44:39.676] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:44:39.676] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:44:39.676] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:44:39.676] data.LB_FadeInType0=100 [2025-09-24 04:44:39.676] data.CHLH_FadeInType0=0 [2025-09-24 04:44:39.676] data.WU_FadeInDelay=0 [2025-09-24 04:44:39.676] max_time_out=0 [2025-09-24 04:44:39.676] No splash screen [2025-09-24 04:44:39.676] stop dss Done [2025-09-24 04:44:39.723] /dev/mem opened. [2025-09-24 04:44:39.723] Memory mapped at address 0xffffa4173000. [2025-09-24 04:44:39.760] Read at address 0x00600018 (0xffffa4173018): 0x00000000 [2025-09-24 04:44:39.760] Write at address 0x00600018 (0xffffa4173018): 0x00400040, readback 0x00400040 [2025-09-24 04:44:39.760] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:44:39.760] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:44:39.936] Loaded PowerVR consumer services. [2025-09-24 04:44:40.016] Waiting data available... [2025-09-24 04:44:40.048] 512+0 records in [2025-09-24 04:44:40.048] 512+0 records out [2025-09-24 04:44:40.080] Starting syslogd/klogd: done [2025-09-24 04:44:40.097] DML Start [2025-09-24 04:44:40.256] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:44:40.464] DML res1: 0 [2025-09-24 04:44:40.895] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:44:40.916] Read Success [2025-09-24 04:44:40.916] Verifying certificate... [2025-09-24 04:44:41.141] Verified OK [2025-09-24 04:44:41.157] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:44:42.895] Verified OK [2025-09-24 04:44:42.895] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:44:43.540] Verified OK [2025-09-24 04:44:43.540] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:44:46.034] fs.protected_hardlinks = 1 [2025-09-24 04:44:46.064] fs.protected_symlinks = 1 [2025-09-24 04:44:46.064] kernel.modules_disabled = 1 [2025-09-24 04:44:46.256] [2025-09-24 04:44:46.256] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:44:47.511] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:44:55.361] SBL1:1210.0.1.0 [2025-09-24 04:44:55.409] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:44:56.976] SBL2:1210.0.1.0 [2025-09-24 04:44:57.024] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:44:57.136] j-A [2025-09-24 04:45:04.509] The R5 Autosar Classic is running [2025-09-24 04:45:04.509] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:45:04.509] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:45:05.116] INIT: version 2.96 booting [2025-09-24 04:45:05.211] INIT: Entering runlevel: 5 [2025-09-24 04:45:05.371] mtd32 attached [2025-09-24 04:45:05.387] mtd24 attached [2025-09-24 04:45:05.403] mtd28 attached [2025-09-24 04:45:05.436] ubi0:dml_code is mounted. [2025-09-24 04:45:05.436] RTNETLINK answers: File exists [2025-09-24 04:45:05.489] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:45:05.489] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:45:05.489] ubi1:textures is mounted. [2025-09-24 04:45:05.489] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:45:05.489] ubi2:animations is mounted. [2025-09-24 04:45:05.489] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:45:05.489] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:45:05.489] data.LB_FadeInType0=100 [2025-09-24 04:45:05.489] data.CHLH_FadeInType0=0 [2025-09-24 04:45:05.510] data.WU_FadeInDelay=0 [2025-09-24 04:45:05.510] max_time_out=0 [2025-09-24 04:45:05.510] No splash screen [2025-09-24 04:45:05.510] stop dss Done [2025-09-24 04:45:05.542] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:45:05.542] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:45:05.582] /dev/mem opened. [2025-09-24 04:45:05.582] Memory mapped at address 0xffffa472f000. [2025-09-24 04:45:05.582] Read at address 0x00600018 (0xffffa472f018): 0x00000000 [2025-09-24 04:45:05.582] Write at address 0x00600018 (0xffffa472f018): 0x00400040, readback 0x00400040 [2025-09-24 04:45:05.838] Loaded PowerVR consumer services. [2025-09-24 04:45:05.854] Waiting data available... [2025-09-24 04:45:05.886] 512+0 records in [2025-09-24 04:45:05.886] 512+0 records out [2025-09-24 04:45:05.934] Starting syslogd/klogd: done [2025-09-24 04:45:05.950] DML Start [2025-09-24 04:45:06.077] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:45:06.302] DML res1: 0 [2025-09-24 04:45:06.782] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:45:06.797] Read Success [2025-09-24 04:45:06.798] Verifying certificate... [2025-09-24 04:45:07.021] Verified OK [2025-09-24 04:45:07.036] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:45:08.730] Verified OK [2025-09-24 04:45:08.730] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:45:09.305] Verified OK [2025-09-24 04:45:09.305] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:45:11.991] fs.protected_hardlinks = 1 [2025-09-24 04:45:11.991] fs.protected_symlinks = 1 [2025-09-24 04:45:12.007] kernel.modules_disabled = 1 [2025-09-24 04:45:12.199] [2025-09-24 04:45:12.199] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:45:13.371] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:45:21.168] SBL1:1210.0.1.0 [2025-09-24 04:45:21.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:45:22.783] SBL2:1210.0.1.0 [2025-09-24 04:45:22.831] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:45:22.942] j-A [2025-09-24 04:45:30.281] The R5 Autosar Classic is running [2025-09-24 04:45:30.313] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:45:30.313] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:45:30.920] INIT: version 2.96 booting [2025-09-24 04:45:31.032] INIT: Entering runlevel: 5 [2025-09-24 04:45:31.176] mtd24 attached [2025-09-24 04:45:31.192] mtd32 attached [2025-09-24 04:45:31.208] mtd28 attached [2025-09-24 04:45:31.224] ubi0:textures is mounted. [2025-09-24 04:45:31.255] RTNETLINK answers: File exists [2025-09-24 04:45:31.317] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:45:31.317] ubi1:dml_code is mounted. [2025-09-24 04:45:31.317] ubi2:animations is mounted. [2025-09-24 04:45:31.317] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:45:31.317] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:45:31.317] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:45:31.317] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:45:31.317] data.LB_FadeInType0=100 [2025-09-24 04:45:31.317] data.CHLH_FadeInType0=0 [2025-09-24 04:45:31.317] data.WU_FadeInDelay=0 [2025-09-24 04:45:31.317] max_time_out=0 [2025-09-24 04:45:31.317] No splash screen [2025-09-24 04:45:31.317] stop dss Done [2025-09-24 04:45:31.357] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:45:31.357] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:45:31.395] /dev/mem opened. [2025-09-24 04:45:31.395] Memory mapped at address 0xffffafc90000. [2025-09-24 04:45:31.395] Read at address 0x00600018 (0xffffafc90018): 0x00000000 [2025-09-24 04:45:31.395] Write at address 0x00600018 (0xffffafc90018): 0x00400040, readback 0x00400040 [2025-09-24 04:45:31.538] Loaded PowerVR consumer services. [2025-09-24 04:45:31.667] Waiting data available... [2025-09-24 04:45:31.683] 512+0 records in [2025-09-24 04:45:31.683] 512+0 records out [2025-09-24 04:45:31.730] Starting syslogd/klogd: done [2025-09-24 04:45:31.746] DML Start [2025-09-24 04:45:31.907] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:45:32.115] DML res1: 0 [2025-09-24 04:45:32.618] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:45:32.618] Read Success [2025-09-24 04:45:32.618] Verifying certificate... [2025-09-24 04:45:32.842] Verified OK [2025-09-24 04:45:32.842] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:45:34.511] Verified OK [2025-09-24 04:45:34.511] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:45:35.183] Verified OK [2025-09-24 04:45:35.183] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:45:37.867] fs.protected_hardlinks = 1 [2025-09-24 04:45:37.867] fs.protected_symlinks = 1 [2025-09-24 04:45:37.867] kernel.modules_disabled = 1 [2025-09-24 04:45:38.075] [2025-09-24 04:45:38.075] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:45:39.183] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:45:47.004] SBL1:1210.0.1.0 [2025-09-24 04:45:47.052] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:45:48.618] SBL2:1210.0.1.0 [2025-09-24 04:45:48.666] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:45:48.779] j-A [2025-09-24 04:45:56.151] The R5 Autosar Classic is running [2025-09-24 04:45:56.151] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:45:56.151] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:45:56.758] INIT: version 2.96 booting [2025-09-24 04:45:56.870] INIT: Entering runlevel: 5 [2025-09-24 04:45:57.013] mtd24 attached [2025-09-24 04:45:57.029] mtd28 attached [2025-09-24 04:45:57.045] mtd32 attached [2025-09-24 04:45:57.148] RTNETLINK answers: File exists [2025-09-24 04:45:57.148] ubi1:animations is mounted. [2025-09-24 04:45:57.148] ubi0:textures is mounted. [2025-09-24 04:45:57.148] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:45:57.148] ubi2:dml_code is mounted. [2025-09-24 04:45:57.148] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:45:57.148] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:45:57.148] data.LB_FadeInType0=100 [2025-09-24 04:45:57.148] data.CHLH_FadeInType0=0 [2025-09-24 04:45:57.148] data.WU_FadeInDelay=0 [2025-09-24 04:45:57.148] max_time_out=0 [2025-09-24 04:45:57.148] No splash screen [2025-09-24 04:45:57.148] stop dss Done [2025-09-24 04:45:57.148] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:45:57.148] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:45:57.180] /dev/mem opened. [2025-09-24 04:45:57.206] Memory mapped at address 0xffff8bdb9000. [2025-09-24 04:45:57.206] Read at address 0x00600018 (0xffff8bdb9018): 0x00000000 [2025-09-24 04:45:57.206] Write at address 0x00600018 (0xffff8bdb9018): 0x00400040, readback 0x00400040 [2025-09-24 04:45:57.222] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:45:57.238] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:45:57.446] Loaded PowerVR consumer services. [2025-09-24 04:45:57.525] Waiting data available... [2025-09-24 04:45:57.557] 512+0 records in [2025-09-24 04:45:57.557] 512+0 records out [2025-09-24 04:45:57.573] Starting syslogd/klogd: done [2025-09-24 04:45:57.589] DML Start [2025-09-24 04:45:57.765] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:45:57.957] DML res1: 0 [2025-09-24 04:45:58.481] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:45:58.481] Read Success [2025-09-24 04:45:58.481] Verifying certificate... [2025-09-24 04:45:58.785] Verified OK [2025-09-24 04:45:58.800] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:46:00.399] Verified OK [2025-09-24 04:46:00.399] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:46:00.990] Verified OK [2025-09-24 04:46:00.990] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:46:03.500] fs.protected_hardlinks = 1 [2025-09-24 04:46:03.500] fs.protected_symlinks = 1 [2025-09-24 04:46:03.516] kernel.modules_disabled = 1 [2025-09-24 04:46:03.723] [2025-09-24 04:46:03.723] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:46:05.014] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:46:12.815] SBL1:1210.0.1.0 [2025-09-24 04:46:12.863] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:46:14.430] SBL2:1210.0.1.0 [2025-09-24 04:46:14.478] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:46:14.589] j-A [2025-09-24 04:46:21.963] The R5 Autosar Classic is running [2025-09-24 04:46:21.963] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:46:21.963] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:46:22.571] INIT: version 2.96 booting [2025-09-24 04:46:22.682] INIT: Entering runlevel: 5 [2025-09-24 04:46:22.826] mtd28 attached [2025-09-24 04:46:22.842] mtd24 attached [2025-09-24 04:46:22.874] ubi0:animations is mounted. [2025-09-24 04:46:22.874] mtd32 attached [2025-09-24 04:46:22.890] ubi1:textures is mounted. [2025-09-24 04:46:22.906] RTNETLINK answers: File exists [2025-09-24 04:46:22.940] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:46:22.940] ubi2:dml_code is mounted. [2025-09-24 04:46:22.940] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:46:22.940] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:46:22.940] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:46:22.967] data.LB_FadeInType0=100 [2025-09-24 04:46:22.967] data.CHLH_FadeInType0=0 [2025-09-24 04:46:22.967] data.WU_FadeInDelay=0 [2025-09-24 04:46:22.967] max_time_out=0 [2025-09-24 04:46:22.967] No splash screen [2025-09-24 04:46:22.967] stop dss Done [2025-09-24 04:46:22.967] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:46:23.043] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:46:23.043] /dev/mem opened. [2025-09-24 04:46:23.043] Memory mapped at address 0xffff8eddb000. [2025-09-24 04:46:23.043] Read at address 0x00600018 (0xffff8eddb018): 0x00000000 [2025-09-24 04:46:23.043] Write at address 0x00600018 (0xffff8eddb018): 0x00400040, readback 0x00400040 [2025-09-24 04:46:23.043] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:46:23.324] Waiting data available... [2025-09-24 04:46:23.324] Loaded PowerVR consumer services. [2025-09-24 04:46:23.339] 512+0 records in [2025-09-24 04:46:23.339] 512+0 records out [2025-09-24 04:46:23.387] Starting syslogd/klogd: done [2025-09-24 04:46:23.404] DML Start [2025-09-24 04:46:23.596] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:46:23.819] DML res1: 0 [2025-09-24 04:46:24.289] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:46:24.289] Read Success [2025-09-24 04:46:24.289] Verifying certificate... [2025-09-24 04:46:24.529] Verified OK [2025-09-24 04:46:24.561] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:46:26.317] Verified OK [2025-09-24 04:46:26.317] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:46:26.885] Verified OK [2025-09-24 04:46:26.885] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:46:29.315] fs.protected_hardlinks = 1 [2025-09-24 04:46:29.315] fs.protected_symlinks = 1 [2025-09-24 04:46:29.331] kernel.modules_disabled = 1 [2025-09-24 04:46:29.522] [2025-09-24 04:46:29.522] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:46:30.832] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:46:38.623] SBL1:1210.0.1.0 [2025-09-24 04:46:38.654] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:46:40.238] SBL2:1210.0.1.0 [2025-09-24 04:46:40.270] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:46:40.382] j-A [2025-09-24 04:46:47.757] The R5 Autosar Classic is running [2025-09-24 04:46:47.757] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:46:47.757] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:46:48.365] INIT: version 2.96 booting [2025-09-24 04:46:48.477] INIT: Entering runlevel: 5 [2025-09-24 04:46:48.636] mtd24 attached [2025-09-24 04:46:48.636] mtd28 attached [2025-09-24 04:46:48.652] mtd32 attached [2025-09-24 04:46:48.701] RTNETLINK answers: File exists [2025-09-24 04:46:48.701] ubi0:textures is mounted. [2025-09-24 04:46:48.729] ubi1:animations is mounted. [2025-09-24 04:46:48.729] ubi2:dml_code is mounted. [2025-09-24 04:46:48.729] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:46:48.729] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:46:48.761] data.LB_FadeInType0=100 [2025-09-24 04:46:48.761] data.CHLH_FadeInType0=0 [2025-09-24 04:46:48.761] data.WU_FadeInDelay=0 [2025-09-24 04:46:48.761] max_time_out=0 [2025-09-24 04:46:48.761] No splash screen [2025-09-24 04:46:48.761] stop dss Done [2025-09-24 04:46:48.761] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:46:48.761] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:46:48.761] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:46:48.824] /dev/mem opened. [2025-09-24 04:46:48.824] Memory mapped at address 0xffff90e67000. [2025-09-24 04:46:48.824] Read at address 0x00600018 (0xffff90e67018): 0x00000000 [2025-09-24 04:46:48.824] Write at address 0x00600018 (0xffff90e67018): 0x00400040, readback 0x00400040 [2025-09-24 04:46:48.870] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:46:48.870] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:46:49.031] Loaded PowerVR consumer services. [2025-09-24 04:46:49.142] Waiting data available... [2025-09-24 04:46:49.158] 512+0 records in [2025-09-24 04:46:49.158] 512+0 records out [2025-09-24 04:46:49.190] Starting syslogd/klogd: done [2025-09-24 04:46:49.206] DML Start [2025-09-24 04:46:49.398] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:46:49.606] DML res1: 0 [2025-09-24 04:46:50.063] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:46:50.063] Read Success [2025-09-24 04:46:50.063] Verifying certificate... [2025-09-24 04:46:50.303] Verified OK [2025-09-24 04:46:50.335] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:46:51.977] Verified OK [2025-09-24 04:46:51.977] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:46:52.598] Verified OK [2025-09-24 04:46:52.598] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:46:55.189] fs.protected_hardlinks = 1 [2025-09-24 04:46:55.189] fs.protected_symlinks = 1 [2025-09-24 04:46:55.205] kernel.modules_disabled = 1 [2025-09-24 04:46:55.413] [2025-09-24 04:46:55.413] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:46:56.667] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:47:04.447] SBL1:1210.0.1.0 [2025-09-24 04:47:04.478] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:47:06.061] SBL2:1210.0.1.0 [2025-09-24 04:47:06.093] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:47:06.205] j-A [2025-09-24 04:47:13.560] The R5 Autosar Classic is running [2025-09-24 04:47:13.560] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:47:13.581] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:47:14.189] INIT: version 2.96 booting [2025-09-24 04:47:14.300] INIT: Entering runlevel: 5 [2025-09-24 04:47:14.461] mtd28 attached [2025-09-24 04:47:14.461] mtd24 attached [2025-09-24 04:47:14.477] mtd32 attached [2025-09-24 04:47:14.509] ubi0:animations is mounted. [2025-09-24 04:47:14.524] RTNETLINK answers: File exists [2025-09-24 04:47:14.584] ubi1:textures is mounted. [2025-09-24 04:47:14.584] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:47:14.584] ubi2:dml_code is mounted. [2025-09-24 04:47:14.584] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:47:14.584] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:47:14.584] data.LB_FadeInType0=100 [2025-09-24 04:47:14.584] data.CHLH_FadeInType0=0 [2025-09-24 04:47:14.584] data.WU_FadeInDelay=0 [2025-09-24 04:47:14.584] max_time_out=0 [2025-09-24 04:47:14.584] No splash screen [2025-09-24 04:47:14.584] stop dss Done [2025-09-24 04:47:14.584] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:47:14.584] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:47:14.616] /dev/mem opened. [2025-09-24 04:47:14.616] Memory mapped at address 0xffff8c26e000. [2025-09-24 04:47:14.642] Read at address 0x00600018 (0xffff8c26e018): 0x00000000 [2025-09-24 04:47:14.642] Write at address 0x00600018 (0xffff8c26e018): 0x00400040, readback 0x00400040 [2025-09-24 04:47:14.691] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:47:14.723] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:47:14.818] Loaded PowerVR consumer services. [2025-09-24 04:47:14.946] Waiting data available... [2025-09-24 04:47:14.962] 512+0 records in [2025-09-24 04:47:14.962] 512+0 records out [2025-09-24 04:47:15.011] Starting syslogd/klogd: done [2025-09-24 04:47:15.026] DML Start [2025-09-24 04:47:15.186] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:47:15.410] DML res1: 0 [2025-09-24 04:47:15.794] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:47:15.815] Read Success [2025-09-24 04:47:15.815] Verifying certificate... [2025-09-24 04:47:16.087] Verified OK [2025-09-24 04:47:16.119] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:47:17.797] Verified OK [2025-09-24 04:47:17.797] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:47:18.373] Verified OK [2025-09-24 04:47:18.373] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:47:20.932] fs.protected_hardlinks = 1 [2025-09-24 04:47:20.932] fs.protected_symlinks = 1 [2025-09-24 04:47:20.948] kernel.modules_disabled = 1 [2025-09-24 04:47:21.124] [2025-09-24 04:47:21.124] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:47:22.434] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:47:30.227] SBL1:1210.0.1.0 [2025-09-24 04:47:30.259] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:47:31.841] SBL2:1210.0.1.0 [2025-09-24 04:47:31.888] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:47:31.985] j-A [2025-09-24 04:47:39.338] The R5 Autosar Classic is running [2025-09-24 04:47:39.359] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:47:39.359] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:47:39.968] INIT: version 2.96 booting [2025-09-24 04:47:40.079] INIT: Entering runlevel: 5 [2025-09-24 04:47:40.239] mtd32 attached [2025-09-24 04:47:40.239] mtd28 attached [2025-09-24 04:47:40.255] mtd24 attached [2025-09-24 04:47:40.303] ubi2:textures is mounted. [2025-09-24 04:47:40.303] RTNETLINK answers: File exists [2025-09-24 04:47:40.369] ubi1:animations is mounted. [2025-09-24 04:47:40.369] ubi0:dml_code is mounted. [2025-09-24 04:47:40.369] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:47:40.369] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:47:40.369] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:47:40.369] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:47:40.369] data.LB_FadeInType0=100 [2025-09-24 04:47:40.369] data.CHLH_FadeInType0=0 [2025-09-24 04:47:40.369] data.WU_FadeInDelay=0 [2025-09-24 04:47:40.369] max_time_out=0 [2025-09-24 04:47:40.369] No splash screen [2025-09-24 04:47:40.369] stop dss Done [2025-09-24 04:47:40.369] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:47:40.416] /dev/mem opened. [2025-09-24 04:47:40.459] Memory mapped at address 0xffffa46f3000. [2025-09-24 04:47:40.459] Read at address 0x00600018 (0xffffa46f3018): 0x00000000 [2025-09-24 04:47:40.459] Write at address 0x00600018 (0xffffa46f3018): 0x00400040, readback 0x00400040 [2025-09-24 04:47:40.459] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:47:40.459] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:47:40.555] Loaded PowerVR consumer services. [2025-09-24 04:47:40.731] Waiting data available... [2025-09-24 04:47:40.746] 512+0 records in [2025-09-24 04:47:40.746] 512+0 records out [2025-09-24 04:47:40.778] Starting syslogd/klogd: done [2025-09-24 04:47:40.794] DML Start [2025-09-24 04:47:40.939] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:47:41.211] DML res1: 0 [2025-09-24 04:47:41.638] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:47:41.638] Read Success [2025-09-24 04:47:41.638] Verifying certificate... [2025-09-24 04:47:41.894] Verified OK [2025-09-24 04:47:41.910] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:47:43.668] Verified OK [2025-09-24 04:47:43.668] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:47:44.210] Verified OK [2025-09-24 04:47:44.210] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:47:46.593] fs.protected_hardlinks = 1 [2025-09-24 04:47:46.593] fs.protected_symlinks = 1 [2025-09-24 04:47:46.609] kernel.modules_disabled = 1 [2025-09-24 04:47:46.785] [2025-09-24 04:47:46.785] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:47:48.278] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:47:50.570] SBL1:1210.0.1.0 [2025-09-24 04:47:56.069] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:47:57.636] SBL2:1210.0.1.0 [2025-09-24 04:47:57.684] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:47:57.796] j-A [2025-09-24 04:48:05.169] The R5 Autosar Classic is running [2025-09-24 04:48:05.169] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:48:05.169] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:48:05.776] INIT: version 2.96 booting [2025-09-24 04:48:05.888] INIT: Entering runlevel: 5 [2025-09-24 04:48:06.032] mtd24 attached [2025-09-24 04:48:06.048] mtd32 attached [2025-09-24 04:48:06.064] mtd28 attached [2025-09-24 04:48:06.080] ubi0:textures is mounted. [2025-09-24 04:48:06.113] ubi1:dml_code is mounted. [2025-09-24 04:48:06.113] RTNETLINK answers: File exists [2025-09-24 04:48:06.142] ubi2:animations is mounted. [2025-09-24 04:48:06.142] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:48:06.142] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:48:06.142] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:48:06.142] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:48:06.172] data.LB_FadeInType0=100 [2025-09-24 04:48:06.172] data.CHLH_FadeInType0=0 [2025-09-24 04:48:06.172] data.WU_FadeInDelay=0 [2025-09-24 04:48:06.172] max_time_out=0 [2025-09-24 04:48:06.172] No splash screen [2025-09-24 04:48:06.172] stop dss Done [2025-09-24 04:48:06.172] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:48:06.211] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:48:06.211] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:48:06.247] /dev/mem opened. [2025-09-24 04:48:06.247] Memory mapped at address 0xffffb1729000. [2025-09-24 04:48:06.247] Read at address 0x00600018 (0xffffb1729018): 0x00000000 [2025-09-24 04:48:06.247] Write at address 0x00600018 (0xffffb1729018): 0x00400040, readback 0x00400040 [2025-09-24 04:48:06.327] Loaded PowerVR consumer services. [2025-09-24 04:48:06.519] Waiting data available... [2025-09-24 04:48:06.535] 512+0 records in [2025-09-24 04:48:06.535] 512+0 records out [2025-09-24 04:48:06.583] Starting syslogd/klogd: done [2025-09-24 04:48:06.599] DML Start [2025-09-24 04:48:06.775] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:48:06.998] DML res1: 0 [2025-09-24 04:48:07.431] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:48:07.452] Read Success [2025-09-24 04:48:07.452] Verifying certificate... [2025-09-24 04:48:07.691] Verified OK [2025-09-24 04:48:07.707] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:48:09.529] Verified OK [2025-09-24 04:48:09.529] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:48:10.041] Verified OK [2025-09-24 04:48:10.041] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:48:12.504] fs.protected_hardlinks = 1 [2025-09-24 04:48:12.504] fs.protected_symlinks = 1 [2025-09-24 04:48:12.504] kernel.modules_disabled = 1 [2025-09-24 04:48:12.711] [2025-09-24 04:48:12.711] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:48:14.032] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:48:21.852] SBL1:1210.0.1.0 [2025-09-24 04:48:21.884] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:48:23.467] SBL2:1210.0.1.0 [2025-09-24 04:48:23.515] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:48:23.610] j-A [2025-09-24 04:48:30.964] The R5 Autosar Classic is running [2025-09-24 04:48:30.987] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:48:30.987] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:48:31.595] INIT: version 2.96 booting [2025-09-24 04:48:31.706] INIT: Entering runlevel: 5 [2025-09-24 04:48:31.851] mtd28 attached [2025-09-24 04:48:31.867] mtd24 attached [2025-09-24 04:48:31.883] mtd32 attached [2025-09-24 04:48:31.915] ubi0:animations is mounted. [2025-09-24 04:48:31.946] RTNETLINK answers: File exists [2025-09-24 04:48:31.946] ubi1:textures is mounted. [2025-09-24 04:48:31.946] ubi2:dml_code is mounted. [2025-09-24 04:48:31.946] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:48:31.990] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:48:31.990] data.LB_FadeInType0=100 [2025-09-24 04:48:31.990] data.CHLH_FadeInType0=0 [2025-09-24 04:48:31.990] data.WU_FadeInDelay=0 [2025-09-24 04:48:31.990] max_time_out=0 [2025-09-24 04:48:31.990] No splash screen [2025-09-24 04:48:31.990] stop dss Done [2025-09-24 04:48:31.990] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:48:31.990] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:48:31.990] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:48:32.038] /dev/mem opened. [2025-09-24 04:48:32.038] Memory mapped at address 0xffff8e412000. [2025-09-24 04:48:32.038] Read at address 0x00600018 (0xffff8e412018): 0x00000000 [2025-09-24 04:48:32.038] Write at address 0x00600018 (0xffff8e412018): 0x00400040, readback 0x00400040 [2025-09-24 04:48:32.101] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:48:32.101] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:48:32.181] Loaded PowerVR consumer services. [2025-09-24 04:48:32.325] Waiting data available... [2025-09-24 04:48:32.342] 512+0 records in [2025-09-24 04:48:32.342] 512+0 records out [2025-09-24 04:48:32.373] Starting syslogd/klogd: done [2025-09-24 04:48:32.389] DML Start [2025-09-24 04:48:32.565] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:48:32.789] DML res1: 0 [2025-09-24 04:48:33.241] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:48:33.241] Read Success [2025-09-24 04:48:33.241] Verifying certificate... [2025-09-24 04:48:33.482] Verified OK [2025-09-24 04:48:33.482] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:48:35.176] Verified OK [2025-09-24 04:48:35.176] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:48:35.764] Verified OK [2025-09-24 04:48:35.764] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:48:38.418] fs.protected_hardlinks = 1 [2025-09-24 04:48:38.418] fs.protected_symlinks = 1 [2025-09-24 04:48:38.434] kernel.modules_disabled = 1 [2025-09-24 04:48:38.626] [2025-09-24 04:48:38.626] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:48:39.802] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:48:47.666] SBL1:1210.0.1.0 [2025-09-24 04:48:47.714] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:48:49.282] SBL2:1210.0.1.0 [2025-09-24 04:48:49.329] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:48:49.425] j-A [2025-09-24 04:48:56.779] The R5 Autosar Classic is running [2025-09-24 04:48:56.803] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:48:56.803] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:48:57.411] INIT: version 2.96 booting [2025-09-24 04:48:57.522] INIT: Entering runlevel: 5 [2025-09-24 04:48:57.667] mtd24 attached [2025-09-24 04:48:57.683] mtd32 attached [2025-09-24 04:48:57.699] mtd28 attached [2025-09-24 04:48:57.714] ubi0:textures is mounted. [2025-09-24 04:48:57.746] RTNETLINK answers: File exists [2025-09-24 04:48:57.746] ubi1:dml_code is mounted. [2025-09-24 04:48:57.781] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:48:57.781] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:48:57.781] ubi2:animations is mounted. [2025-09-24 04:48:57.781] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:48:57.781] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:48:57.781] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:48:57.803] data.LB_FadeInType0=100 [2025-09-24 04:48:57.803] data.CHLH_FadeInType0=0 [2025-09-24 04:48:57.803] data.WU_FadeInDelay=0 [2025-09-24 04:48:57.803] max_time_out=0 [2025-09-24 04:48:57.803] No splash screen [2025-09-24 04:48:57.803] stop dss Done [2025-09-24 04:48:57.835] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:48:57.851] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:48:57.890] /dev/mem opened. [2025-09-24 04:48:57.890] Memory mapped at address 0xffffb507d000. [2025-09-24 04:48:57.890] Read at address 0x00600018 (0xffffb507d018): 0x00000000 [2025-09-24 04:48:57.890] Write at address 0x00600018 (0xffffb507d018): 0x00400040, readback 0x00400040 [2025-09-24 04:48:57.954] Loaded PowerVR consumer services. [2025-09-24 04:48:58.145] Waiting data available... [2025-09-24 04:48:58.177] 512+0 records in [2025-09-24 04:48:58.177] 512+0 records out [2025-09-24 04:48:58.193] Starting syslogd/klogd: done [2025-09-24 04:48:58.226] DML Start [2025-09-24 04:48:58.369] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:48:58.593] DML res1: 0 [2025-09-24 04:48:59.031] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:48:59.031] Read Success [2025-09-24 04:48:59.031] Verifying certificate... [2025-09-24 04:48:59.255] Verified OK [2025-09-24 04:48:59.271] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:49:00.974] Verified OK [2025-09-24 04:49:00.974] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:49:01.614] Verified OK [2025-09-24 04:49:01.635] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:49:04.256] fs.protected_hardlinks = 1 [2025-09-24 04:49:04.256] fs.protected_symlinks = 1 [2025-09-24 04:49:04.272] kernel.modules_disabled = 1 [2025-09-24 04:49:04.465] [2025-09-24 04:49:04.465] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:49:05.654] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:49:13.481] SBL1:1210.0.1.0 [2025-09-24 04:49:13.529] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:49:15.096] SBL2:1210.0.1.0 [2025-09-24 04:49:15.144] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:49:15.240] j-A [2025-09-24 04:49:22.594] The R5 Autosar Classic is running [2025-09-24 04:49:22.618] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:49:22.618] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:49:23.226] INIT: version 2.96 booting [2025-09-24 04:49:23.337] INIT: Entering runlevel: 5 [2025-09-24 04:49:23.482] mtd24 attached [2025-09-24 04:49:23.498] mtd32 attached [2025-09-24 04:49:23.514] mtd28 attached [2025-09-24 04:49:23.546] ubi0:textures is mounted. [2025-09-24 04:49:23.562] ubi1:dml_code is mounted. [2025-09-24 04:49:23.562] RTNETLINK answers: File exists [2025-09-24 04:49:23.622] ubi2:animations is mounted. [2025-09-24 04:49:23.622] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:49:23.622] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:49:23.622] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:49:23.622] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:49:23.622] data.LB_FadeInType0=100 [2025-09-24 04:49:23.622] data.CHLH_FadeInType0=0 [2025-09-24 04:49:23.622] data.WU_FadeInDelay=0 [2025-09-24 04:49:23.622] max_time_out=0 [2025-09-24 04:49:23.622] No splash screen [2025-09-24 04:49:23.622] stop dss Done [2025-09-24 04:49:23.622] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:49:23.700] /dev/mem opened. [2025-09-24 04:49:23.700] Memory mapped at address 0xffffaa66a000. [2025-09-24 04:49:23.700] Read at address 0x00600018 (0xffffaa66a018): 0x00000000 [2025-09-24 04:49:23.700] Write at address 0x00600018 (0xffffaa66a018): 0x00400040, readback 0x00400040 [2025-09-24 04:49:23.700] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:49:23.700] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:49:23.812] Loaded PowerVR consumer services. [2025-09-24 04:49:23.955] Waiting data available... [2025-09-24 04:49:23.987] 512+0 records in [2025-09-24 04:49:23.987] 512+0 records out [2025-09-24 04:49:24.036] Starting syslogd/klogd: done [2025-09-24 04:49:24.052] DML Start [2025-09-24 04:49:24.243] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:49:24.500] DML res1: 0 [2025-09-24 04:49:24.895] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:49:24.895] Read Success [2025-09-24 04:49:24.895] Verifying certificate... [2025-09-24 04:49:25.198] Verified OK [2025-09-24 04:49:25.231] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:49:26.852] Verified OK [2025-09-24 04:49:26.852] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:49:27.454] Verified OK [2025-09-24 04:49:27.454] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:49:29.980] fs.protected_hardlinks = 1 [2025-09-24 04:49:29.996] fs.protected_symlinks = 1 [2025-09-24 04:49:30.012] kernel.modules_disabled = 1 [2025-09-24 04:49:30.205] [2025-09-24 04:49:30.205] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:49:31.480] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:49:39.304] SBL1:1210.0.1.0 [2025-09-24 04:49:39.336] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:49:40.918] SBL2:1210.0.1.0 [2025-09-24 04:49:40.966] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:49:41.063] j-A [2025-09-24 04:49:48.418] The R5 Autosar Classic is running [2025-09-24 04:49:48.418] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:49:48.439] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:49:49.047] INIT: version 2.96 booting [2025-09-24 04:49:49.158] INIT: Entering runlevel: 5 [2025-09-24 04:49:49.303] mtd28 attached [2025-09-24 04:49:49.318] mtd24 attached [2025-09-24 04:49:49.350] ubi0:animations is mounted. [2025-09-24 04:49:49.350] mtd32 attached [2025-09-24 04:49:49.366] RTNETLINK answers: File exists [2025-09-24 04:49:49.383] ubi1:textures is mounted. [2025-09-24 04:49:49.413] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:49:49.413] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:49:49.413] ubi2:dml_code is mounted. [2025-09-24 04:49:49.413] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:49:49.413] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:49:49.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:49:49.440] data.LB_FadeInType0=100 [2025-09-24 04:49:49.440] data.CHLH_FadeInType0=0 [2025-09-24 04:49:49.440] data.WU_FadeInDelay=0 [2025-09-24 04:49:49.440] max_time_out=0 [2025-09-24 04:49:49.440] No splash screen [2025-09-24 04:49:49.440] stop dss Done [2025-09-24 04:49:49.525] /dev/mem opened. [2025-09-24 04:49:49.525] Memory mapped at address 0xffff8e569000. [2025-09-24 04:49:49.525] Read at address 0x00600018 (0xffff8e569018): 0x00000000 [2025-09-24 04:49:49.525] Write at address 0x00600018 (0xffff8e569018): 0x00400040, readback 0x00400040 [2025-09-24 04:49:49.525] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:49:49.525] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:49:49.701] Loaded PowerVR consumer services. [2025-09-24 04:49:49.796] Waiting data available... [2025-09-24 04:49:49.828] 512+0 records in [2025-09-24 04:49:49.828] 512+0 records out [2025-09-24 04:49:49.860] Starting syslogd/klogd: done [2025-09-24 04:49:49.876] DML Start [2025-09-24 04:49:50.036] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:49:50.260] DML res1: 0 [2025-09-24 04:49:50.692] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:49:50.713] Read Success [2025-09-24 04:49:50.713] Verifying certificate... [2025-09-24 04:49:50.985] Verified OK [2025-09-24 04:49:51.001] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:49:52.727] Verified OK [2025-09-24 04:49:52.727] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:49:53.331] Verified OK [2025-09-24 04:49:53.331] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:49:55.825] fs.protected_hardlinks = 1 [2025-09-24 04:49:55.841] fs.protected_symlinks = 1 [2025-09-24 04:49:55.841] kernel.modules_disabled = 1 [2025-09-24 04:49:56.048] [2025-09-24 04:49:56.048] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:49:57.320] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:50:05.070] SBL1:1210.0.1.0 [2025-09-24 04:50:05.118] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:50:06.684] SBL2:1210.0.1.0 [2025-09-24 04:50:06.733] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:50:06.844] j-A [2025-09-24 04:50:14.183] The R5 Autosar Classic is running [2025-09-24 04:50:14.208] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:50:14.208] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:50:14.833] INIT: version 2.96 booting [2025-09-24 04:50:14.944] INIT: Entering runlevel: 5 [2025-09-24 04:50:15.087] mtd32 attached [2025-09-24 04:50:15.103] mtd24 attached [2025-09-24 04:50:15.103] mtd28 attached [2025-09-24 04:50:15.168] ubi1:textures is mounted. [2025-09-24 04:50:15.168] RTNETLINK answers: File exists [2025-09-24 04:50:15.196] ubi2:animations is mounted. [2025-09-24 04:50:15.196] ubi0:dml_code is mounted. [2025-09-24 04:50:15.196] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:50:15.196] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:50:15.196] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:50:15.196] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:50:15.228] data.LB_FadeInType0=100 [2025-09-24 04:50:15.228] data.CHLH_FadeInType0=0 [2025-09-24 04:50:15.228] data.WU_FadeInDelay=0 [2025-09-24 04:50:15.228] max_time_out=0 [2025-09-24 04:50:15.228] No splash screen [2025-09-24 04:50:15.228] stop dss Done [2025-09-24 04:50:15.228] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:50:15.297] /dev/mem opened. [2025-09-24 04:50:15.297] Memory mapped at address 0xffff81f86000. [2025-09-24 04:50:15.297] Read at address 0x00600018 (0xffff81f86018): 0x00000000 [2025-09-24 04:50:15.297] Write at address 0x00600018 (0xffff81f86018): 0x00400040, readback 0x00400040 [2025-09-24 04:50:15.313] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:50:15.329] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:50:15.585] Loaded PowerVR consumer services. [2025-09-24 04:50:15.617] Waiting data available... [2025-09-24 04:50:15.649] 512+0 records in [2025-09-24 04:50:15.649] 512+0 records out [2025-09-24 04:50:15.664] Starting syslogd/klogd: done [2025-09-24 04:50:15.681] DML Start [2025-09-24 04:50:15.841] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:50:16.048] DML res1: 0 [2025-09-24 04:50:16.623] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:50:16.644] Read Success [2025-09-24 04:50:16.644] Verifying certificate... [2025-09-24 04:50:16.901] Verified OK [2025-09-24 04:50:16.933] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:50:18.737] Verified OK [2025-09-24 04:50:18.737] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:50:19.145] Verified OK [2025-09-24 04:50:19.145] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:50:21.446] fs.protected_hardlinks = 1 [2025-09-24 04:50:21.463] fs.protected_symlinks = 1 [2025-09-24 04:50:21.463] kernel.modules_disabled = 1 [2025-09-24 04:50:21.655] [2025-09-24 04:50:21.655] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:50:23.106] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:50:30.890] SBL1:1210.0.1.0 [2025-09-24 04:50:30.922] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:50:32.505] SBL2:1210.0.1.0 [2025-09-24 04:50:32.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:50:32.649] j-A [2025-09-24 04:50:40.025] The R5 Autosar Classic is running [2025-09-24 04:50:40.025] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:50:40.025] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:50:40.633] INIT: version 2.96 booting [2025-09-24 04:50:40.745] INIT: Entering runlevel: 5 [2025-09-24 04:50:40.889] mtd24 attached [2025-09-24 04:50:40.905] mtd28 attached [2025-09-24 04:50:40.921] mtd32 attached [2025-09-24 04:50:41.029] ubi0:textures is mounted. [2025-09-24 04:50:41.029] ubi1:animations is mounted. [2025-09-24 04:50:41.029] RTNETLINK answers: File exists [2025-09-24 04:50:41.029] ubi2:dml_code is mounted. [2025-09-24 04:50:41.029] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:50:41.029] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:50:41.029] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:50:41.029] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:50:41.029] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:50:41.029] data.LB_FadeInType0=100 [2025-09-24 04:50:41.029] data.CHLH_FadeInType0=0 [2025-09-24 04:50:41.029] data.WU_FadeInDelay=0 [2025-09-24 04:50:41.029] max_time_out=0 [2025-09-24 04:50:41.029] No splash screen [2025-09-24 04:50:41.029] stop dss Done [2025-09-24 04:50:41.112] /dev/mem opened. [2025-09-24 04:50:41.112] Memory mapped at address 0xffff8bcc0000. [2025-09-24 04:50:41.112] Read at address 0x00600018 (0xffff8bcc0018): 0x00000000 [2025-09-24 04:50:41.112] Write at address 0x00600018 (0xffff8bcc0018): 0x00400040, readback 0x00400040 [2025-09-24 04:50:41.112] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:50:41.128] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:50:41.336] Loaded PowerVR consumer services. [2025-09-24 04:50:41.384] Waiting data available... [2025-09-24 04:50:41.400] 512+0 records in [2025-09-24 04:50:41.400] 512+0 records out [2025-09-24 04:50:41.432] Starting syslogd/klogd: done [2025-09-24 04:50:41.447] DML Start [2025-09-24 04:50:41.623] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:50:41.831] DML res1: 0 [2025-09-24 04:50:42.275] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:50:42.275] Read Success [2025-09-24 04:50:42.275] Verifying certificate... [2025-09-24 04:50:42.498] Verified OK [2025-09-24 04:50:42.514] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:50:44.234] Verified OK [2025-09-24 04:50:44.234] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:50:44.810] Verified OK [2025-09-24 04:50:44.810] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:50:47.399] fs.protected_hardlinks = 1 [2025-09-24 04:50:47.416] fs.protected_symlinks = 1 [2025-09-24 04:50:47.416] kernel.modules_disabled = 1 [2025-09-24 04:50:47.608] [2025-09-24 04:50:47.608] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:50:48.855] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:50:56.748] SBL1:1210.0.1.0 [2025-09-24 04:50:56.780] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:50:58.363] SBL2:1210.0.1.0 [2025-09-24 04:50:58.395] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:50:58.507] j-A [2025-09-24 04:51:05.881] The R5 Autosar Classic is running [2025-09-24 04:51:05.881] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:51:05.881] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:51:06.488] INIT: version 2.96 booting [2025-09-24 04:51:06.599] INIT: Entering runlevel: 5 [2025-09-24 04:51:06.744] mtd24 attached [2025-09-24 04:51:06.760] mtd28 attached [2025-09-24 04:51:06.776] mtd32 attached [2025-09-24 04:51:06.792] ubi0:textures is mounted. [2025-09-24 04:51:06.824] ubi1:animations is mounted. [2025-09-24 04:51:06.824] RTNETLINK answers: File exists [2025-09-24 04:51:06.883] ubi2:dml_code is mounted. [2025-09-24 04:51:06.883] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:51:06.883] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:51:06.883] data.LB_FadeInType0=100 [2025-09-24 04:51:06.883] data.CHLH_FadeInType0=0 [2025-09-24 04:51:06.883] data.WU_FadeInDelay=0 [2025-09-24 04:51:06.883] max_time_out=0 [2025-09-24 04:51:06.883] No splash screen [2025-09-24 04:51:06.883] stop dss Done [2025-09-24 04:51:06.883] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:51:06.883] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:51:06.883] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:51:06.914] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:51:06.958] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:51:06.958] /dev/mem opened. [2025-09-24 04:51:06.958] Memory mapped at address 0xffff9e811000. [2025-09-24 04:51:06.958] Read at address 0x00600018 (0xffff9e811018): 0x00000000 [2025-09-24 04:51:06.958] Write at address 0x00600018 (0xffff9e811018): 0x00400040, readback 0x00400040 [2025-09-24 04:51:07.246] Loaded PowerVR consumer services. [2025-09-24 04:51:07.294] Waiting data available... [2025-09-24 04:51:07.326] 512+0 records in [2025-09-24 04:51:07.326] 512+0 records out [2025-09-24 04:51:07.358] Starting syslogd/klogd: done [2025-09-24 04:51:07.358] DML Start [2025-09-24 04:51:07.550] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:51:07.773] DML res1: 0 [2025-09-24 04:51:08.243] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:51:08.243] Read Success [2025-09-24 04:51:08.243] Verifying certificate... [2025-09-24 04:51:08.468] Verified OK [2025-09-24 04:51:08.484] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:51:10.115] Verified OK [2025-09-24 04:51:10.115] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:51:10.697] Verified OK [2025-09-24 04:51:10.697] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:51:13.383] fs.protected_hardlinks = 1 [2025-09-24 04:51:13.383] fs.protected_symlinks = 1 [2025-09-24 04:51:13.399] kernel.modules_disabled = 1 [2025-09-24 04:51:13.591] [2025-09-24 04:51:13.591] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:51:14.803] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:51:22.537] SBL1:1210.0.1.0 [2025-09-24 04:51:22.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:51:24.152] SBL2:1210.0.1.0 [2025-09-24 04:51:24.200] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:51:24.312] j-A [2025-09-24 04:51:31.650] The R5 Autosar Classic is running [2025-09-24 04:51:31.681] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:51:31.681] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:51:32.289] INIT: version 2.96 booting [2025-09-24 04:51:32.386] INIT: Entering runlevel: 5 [2025-09-24 04:51:32.545] mtd32 attached [2025-09-24 04:51:32.561] mtd28 attached [2025-09-24 04:51:32.561] mtd24 attached [2025-09-24 04:51:32.609] RTNETLINK answers: File exists [2025-09-24 04:51:32.676] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:51:32.676] ubi1:animations is mounted. [2025-09-24 04:51:32.676] ubi0:dml_code is mounted. [2025-09-24 04:51:32.676] ubi2:textures is mounted. [2025-09-24 04:51:32.676] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:51:32.676] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:51:32.676] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:51:32.676] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:51:32.676] data.LB_FadeInType0=100 [2025-09-24 04:51:32.676] data.CHLH_FadeInType0=0 [2025-09-24 04:51:32.676] data.WU_FadeInDelay=0 [2025-09-24 04:51:32.676] max_time_out=0 [2025-09-24 04:51:32.676] No splash screen [2025-09-24 04:51:32.676] stop dss Done [2025-09-24 04:51:32.709] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:51:32.724] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:51:32.763] /dev/mem opened. [2025-09-24 04:51:32.763] Memory mapped at address 0xffffb8dc9000. [2025-09-24 04:51:32.763] Read at address 0x00600018 (0xffffb8dc9018): 0x00000000 [2025-09-24 04:51:32.763] Write at address 0x00600018 (0xffffb8dc9018): 0x00400040, readback 0x00400040 [2025-09-24 04:51:32.907] Loaded PowerVR consumer services. [2025-09-24 04:51:33.019] Waiting data available... [2025-09-24 04:51:33.035] 512+0 records in [2025-09-24 04:51:33.035] 512+0 records out [2025-09-24 04:51:33.067] Starting syslogd/klogd: done [2025-09-24 04:51:33.083] DML Start [2025-09-24 04:51:33.275] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:51:33.451] DML res1: 0 [2025-09-24 04:51:33.898] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:51:33.915] Read Success [2025-09-24 04:51:33.915] Verifying certificate... [2025-09-24 04:51:34.154] Verified OK [2025-09-24 04:51:34.154] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:51:35.706] Verified OK [2025-09-24 04:51:35.706] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:51:36.325] Verified OK [2025-09-24 04:51:36.325] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:51:39.028] fs.protected_hardlinks = 1 [2025-09-24 04:51:39.028] fs.protected_symlinks = 1 [2025-09-24 04:51:39.043] kernel.modules_disabled = 1 [2025-09-24 04:51:39.235] [2025-09-24 04:51:39.235] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:51:40.505] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:51:48.339] SBL1:1210.0.1.0 [2025-09-24 04:51:48.387] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:51:49.953] SBL2:1210.0.1.0 [2025-09-24 04:51:50.001] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:51:50.097] j-A [2025-09-24 04:51:57.451] The R5 Autosar Classic is running [2025-09-24 04:51:57.476] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:51:57.476] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:51:58.084] INIT: version 2.96 booting [2025-09-24 04:51:58.195] INIT: Entering runlevel: 5 [2025-09-24 04:51:58.356] mtd24 attached [2025-09-24 04:51:58.356] mtd28 attached [2025-09-24 04:51:58.372] mtd32 attached [2025-09-24 04:51:58.484] RTNETLINK answers: File exists [2025-09-24 04:51:58.484] ubi0:textures is mounted. [2025-09-24 04:51:58.484] ubi1:animations is mounted. [2025-09-24 04:51:58.484] ubi2:dml_code is mounted. [2025-09-24 04:51:58.484] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:51:58.484] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:51:58.484] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:51:58.484] data.LB_FadeInType0=100 [2025-09-24 04:51:58.484] data.CHLH_FadeInType0=0 [2025-09-24 04:51:58.484] data.WU_FadeInDelay=0 [2025-09-24 04:51:58.484] max_time_out=0 [2025-09-24 04:51:58.484] No splash screen [2025-09-24 04:51:58.484] stop dss Done [2025-09-24 04:51:58.484] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:51:58.484] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:51:58.554] /dev/mem opened. [2025-09-24 04:51:58.554] Memory mapped at address 0xffffb0c37000. [2025-09-24 04:51:58.554] Read at address 0x00600018 (0xffffb0c37018): 0x00000000 [2025-09-24 04:51:58.554] Write at address 0x00600018 (0xffffb0c37018): 0x00400040, readback 0x00400040 [2025-09-24 04:51:58.554] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:51:58.554] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:51:58.698] Loaded PowerVR consumer services. [2025-09-24 04:51:58.842] Waiting data available... [2025-09-24 04:51:58.858] 512+0 records in [2025-09-24 04:51:58.874] 512+0 records out [2025-09-24 04:51:58.905] Starting syslogd/klogd: done [2025-09-24 04:51:58.921] DML Start [2025-09-24 04:51:59.097] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:51:59.321] DML res1: 0 [2025-09-24 04:51:59.781] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:51:59.781] Read Success [2025-09-24 04:51:59.781] Verifying certificate... [2025-09-24 04:52:00.005] Verified OK [2025-09-24 04:52:00.021] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:52:01.700] Verified OK [2025-09-24 04:52:01.700] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:52:02.292] Verified OK [2025-09-24 04:52:02.292] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:52:04.850] fs.protected_hardlinks = 1 [2025-09-24 04:52:04.850] fs.protected_symlinks = 1 [2025-09-24 04:52:04.866] kernel.modules_disabled = 1 [2025-09-24 04:52:05.042] [2025-09-24 04:52:05.042] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:52:06.343] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:52:14.144] SBL1:1210.0.1.0 [2025-09-24 04:52:14.192] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:52:15.758] SBL2:1210.0.1.0 [2025-09-24 04:52:15.806] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:52:15.902] j-A [2025-09-24 04:52:23.257] The R5 Autosar Classic is running [2025-09-24 04:52:23.281] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:52:23.281] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:52:23.889] INIT: version 2.96 booting [2025-09-24 04:52:24.000] INIT: Entering runlevel: 5 [2025-09-24 04:52:24.145] mtd24 attached [2025-09-24 04:52:24.161] mtd28 attached [2025-09-24 04:52:24.193] ubi0:textures is mounted. [2025-09-24 04:52:24.208] ubi1:animations is mounted. [2025-09-24 04:52:24.208] mtd32 attached [2025-09-24 04:52:24.224] RTNETLINK answers: File exists [2025-09-24 04:52:24.240] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:52:24.240] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:52:24.283] ubi2:dml_code is mounted. [2025-09-24 04:52:24.283] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:52:24.283] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:52:24.283] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:52:24.283] data.LB_FadeInType0=100 [2025-09-24 04:52:24.283] data.CHLH_FadeInType0=0 [2025-09-24 04:52:24.283] data.WU_FadeInDelay=0 [2025-09-24 04:52:24.283] max_time_out=0 [2025-09-24 04:52:24.283] No splash screen [2025-09-24 04:52:24.283] stop dss Done [2025-09-24 04:52:24.356] /dev/mem opened. [2025-09-24 04:52:24.356] Memory mapped at address 0xffffa3f10000. [2025-09-24 04:52:24.356] Read at address 0x00600018 (0xffffa3f10018): 0x00000000 [2025-09-24 04:52:24.356] Write at address 0x00600018 (0xffffa3f10018): 0x00400040, readback 0x00400040 [2025-09-24 04:52:24.356] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:52:24.388] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:52:24.563] Loaded PowerVR consumer services. [2025-09-24 04:52:24.643] Waiting data available... [2025-09-24 04:52:24.675] 512+0 records in [2025-09-24 04:52:24.675] 512+0 records out [2025-09-24 04:52:24.723] Starting syslogd/klogd: done [2025-09-24 04:52:24.739] DML Start [2025-09-24 04:52:24.915] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:52:25.155] DML res1: 0 [2025-09-24 04:52:25.629] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:52:25.629] Read Success [2025-09-24 04:52:25.629] Verifying certificate... [2025-09-24 04:52:25.932] Verified OK [2025-09-24 04:52:25.948] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:52:27.685] Verified OK [2025-09-24 04:52:27.685] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:52:28.206] Verified OK [2025-09-24 04:52:28.206] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:52:30.620] fs.protected_hardlinks = 1 [2025-09-24 04:52:30.637] fs.protected_symlinks = 1 [2025-09-24 04:52:30.653] kernel.modules_disabled = 1 [2025-09-24 04:52:30.845] [2025-09-24 04:52:30.845] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:52:32.151] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:52:39.944] SBL1:1210.0.1.0 [2025-09-24 04:52:39.992] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:52:41.559] SBL2:1210.0.1.0 [2025-09-24 04:52:41.607] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:52:41.718] j-A [2025-09-24 04:52:49.056] The R5 Autosar Classic is running [2025-09-24 04:52:49.081] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:52:49.081] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:52:49.689] INIT: version 2.96 booting [2025-09-24 04:52:49.801] INIT: Entering runlevel: 5 [2025-09-24 04:52:49.944] mtd28 attached [2025-09-24 04:52:49.960] mtd24 attached [2025-09-24 04:52:49.976] mtd32 attached [2025-09-24 04:52:50.008] ubi1:textures is mounted. [2025-09-24 04:52:50.024] ubi0:animations is mounted. [2025-09-24 04:52:50.024] RTNETLINK answers: File exists [2025-09-24 04:52:50.088] ubi2:dml_code is mounted. [2025-09-24 04:52:50.088] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:52:50.088] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:52:50.088] data.LB_FadeInType0=100 [2025-09-24 04:52:50.088] data.CHLH_FadeInType0=0 [2025-09-24 04:52:50.088] data.WU_FadeInDelay=0 [2025-09-24 04:52:50.088] max_time_out=0 [2025-09-24 04:52:50.088] No splash screen [2025-09-24 04:52:50.088] stop dss Done [2025-09-24 04:52:50.088] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:52:50.088] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:52:50.088] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:52:50.144] /dev/mem opened. [2025-09-24 04:52:50.144] Memory mapped at address 0xffffbd73b000. [2025-09-24 04:52:50.144] Read at address 0x00600018 (0xffffbd73b018): 0x00000000 [2025-09-24 04:52:50.144] Write at address 0x00600018 (0xffffbd73b018): 0x00400040, readback 0x00400040 [2025-09-24 04:52:50.144] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:52:50.160] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:52:50.256] Loaded PowerVR consumer services. [2025-09-24 04:52:50.432] Waiting data available... [2025-09-24 04:52:50.464] 512+0 records in [2025-09-24 04:52:50.464] 512+0 records out [2025-09-24 04:52:50.512] Starting syslogd/klogd: done [2025-09-24 04:52:50.528] DML Start [2025-09-24 04:52:50.704] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:52:50.928] DML res1: 0 [2025-09-24 04:52:51.355] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:52:51.355] Read Success [2025-09-24 04:52:51.355] Verifying certificate... [2025-09-24 04:52:51.611] Verified OK [2025-09-24 04:52:51.627] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:52:53.209] Verified OK [2025-09-24 04:52:53.209] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:52:53.704] Verified OK [2025-09-24 04:52:53.704] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:52:56.454] fs.protected_hardlinks = 1 [2025-09-24 04:52:56.469] fs.protected_symlinks = 1 [2025-09-24 04:52:56.469] kernel.modules_disabled = 1 [2025-09-24 04:52:56.677] [2025-09-24 04:52:56.677] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:52:57.939] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:53:05.750] SBL1:1210.0.1.0 [2025-09-24 04:53:05.782] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:53:07.349] SBL2:1210.0.1.0 [2025-09-24 04:53:07.397] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:53:07.509] j-A [2025-09-24 04:53:14.882] The R5 Autosar Classic is running [2025-09-24 04:53:14.882] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:53:14.882] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:53:15.489] INIT: version 2.96 booting [2025-09-24 04:53:15.601] INIT: Entering runlevel: 5 [2025-09-24 04:53:15.745] mtd28 attached [2025-09-24 04:53:15.761] mtd24 attached [2025-09-24 04:53:15.777] mtd32 attached [2025-09-24 04:53:15.809] RTNETLINK answers: File exists [2025-09-24 04:53:15.878] ubi1:textures is mounted. [2025-09-24 04:53:15.878] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:53:15.878] ubi2:dml_code is mounted. [2025-09-24 04:53:15.878] ubi0:animations is mounted. [2025-09-24 04:53:15.878] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:53:15.878] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:53:15.878] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:53:15.878] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:53:15.878] data.LB_FadeInType0=100 [2025-09-24 04:53:15.878] data.CHLH_FadeInType0=0 [2025-09-24 04:53:15.878] data.WU_FadeInDelay=0 [2025-09-24 04:53:15.878] max_time_out=0 [2025-09-24 04:53:15.878] No splash screen [2025-09-24 04:53:15.878] stop dss Done [2025-09-24 04:53:15.909] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:53:15.909] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:53:15.909] /dev/mem opened. [2025-09-24 04:53:15.909] Memory mapped at address 0xffff91e00000. [2025-09-24 04:53:15.935] Read at address 0x00600018 (0xffff91e00018): 0x00000000 [2025-09-24 04:53:15.935] Write at address 0x00600018 (0xffff91e00018): 0x00400040, readback 0x00400040 [2025-09-24 04:53:16.126] Loaded PowerVR consumer services. [2025-09-24 04:53:16.222] Waiting data available... [2025-09-24 04:53:16.255] 512+0 records in [2025-09-24 04:53:16.255] 512+0 records out [2025-09-24 04:53:16.302] Starting syslogd/klogd: done [2025-09-24 04:53:16.318] DML Start [2025-09-24 04:53:16.494] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:53:16.734] DML res1: 0 [2025-09-24 04:53:17.150] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:53:17.171] Read Success [2025-09-24 04:53:17.171] Verifying certificate... [2025-09-24 04:53:17.426] Verified OK [2025-09-24 04:53:17.458] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:53:19.239] Verified OK [2025-09-24 04:53:19.239] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:53:19.751] Verified OK [2025-09-24 04:53:19.751] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:53:22.181] fs.protected_hardlinks = 1 [2025-09-24 04:53:22.181] fs.protected_symlinks = 1 [2025-09-24 04:53:22.196] kernel.modules_disabled = 1 [2025-09-24 04:53:22.389] [2025-09-24 04:53:22.389] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:53:23.765] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:53:31.547] SBL1:1210.0.1.0 [2025-09-24 04:53:31.595] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:53:33.162] SBL2:1210.0.1.0 [2025-09-24 04:53:33.210] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:53:33.306] j-A [2025-09-24 04:53:40.661] The R5 Autosar Classic is running [2025-09-24 04:53:40.686] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:53:40.686] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:53:41.293] INIT: version 2.96 booting [2025-09-24 04:53:41.405] INIT: Entering runlevel: 5 [2025-09-24 04:53:41.549] mtd24 attached [2025-09-24 04:53:41.564] mtd28 attached [2025-09-24 04:53:41.596] ubi0:textures is mounted. [2025-09-24 04:53:41.596] mtd32 attached [2025-09-24 04:53:41.612] ubi1:animations is mounted. [2025-09-24 04:53:41.629] RTNETLINK answers: File exists [2025-09-24 04:53:41.692] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:53:41.692] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:53:41.692] ubi2:dml_code is mounted. [2025-09-24 04:53:41.692] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:53:41.692] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:53:41.692] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:53:41.692] data.LB_FadeInType0=100 [2025-09-24 04:53:41.692] data.CHLH_FadeInType0=0 [2025-09-24 04:53:41.692] data.WU_FadeInDelay=0 [2025-09-24 04:53:41.692] max_time_out=0 [2025-09-24 04:53:41.692] No splash screen [2025-09-24 04:53:41.692] stop dss Done [2025-09-24 04:53:41.779] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:53:41.779] /dev/mem opened. [2025-09-24 04:53:41.779] Memory mapped at address 0xffff90374000. [2025-09-24 04:53:41.779] Read at address 0x00600018 (0xffff90374018): 0x00000000 [2025-09-24 04:53:41.779] Write at address 0x00600018 (0xffff90374018): 0x00400040, readback 0x00400040 [2025-09-24 04:53:41.779] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:53:41.922] Loaded PowerVR consumer services. [2025-09-24 04:53:42.050] Waiting data available... [2025-09-24 04:53:42.066] 512+0 records in [2025-09-24 04:53:42.066] 512+0 records out [2025-09-24 04:53:42.082] Starting syslogd/klogd: done [2025-09-24 04:53:42.114] DML Start [2025-09-24 04:53:42.274] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:53:42.481] DML res1: 0 [2025-09-24 04:53:42.985] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:53:42.985] Read Success [2025-09-24 04:53:42.985] Verifying certificate... [2025-09-24 04:53:43.209] Verified OK [2025-09-24 04:53:43.225] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:53:44.871] Verified OK [2025-09-24 04:53:44.892] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:53:45.495] Verified OK [2025-09-24 04:53:45.495] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:53:48.132] fs.protected_hardlinks = 1 [2025-09-24 04:53:48.132] fs.protected_symlinks = 1 [2025-09-24 04:53:48.148] kernel.modules_disabled = 1 [2025-09-24 04:53:48.340] [2025-09-24 04:53:48.340] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:53:49.555] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:53:57.339] SBL1:1210.0.1.0 [2025-09-24 04:53:57.371] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:53:58.954] SBL2:1210.0.1.0 [2025-09-24 04:53:58.986] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:53:59.099] j-A [2025-09-24 04:54:06.453] The R5 Autosar Classic is running [2025-09-24 04:54:06.453] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:54:06.474] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:54:07.082] INIT: version 2.96 booting [2025-09-24 04:54:07.194] INIT: Entering runlevel: 5 [2025-09-24 04:54:07.337] mtd32 attached [2025-09-24 04:54:07.353] mtd28 attached [2025-09-24 04:54:07.353] mtd24 attached [2025-09-24 04:54:07.451] RTNETLINK answers: File exists [2025-09-24 04:54:07.451] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:54:07.451] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:54:07.451] ubi2:textures is mounted. [2025-09-24 04:54:07.451] ubi1:animations is mounted. [2025-09-24 04:54:07.451] ubi0:dml_code is mounted. [2025-09-24 04:54:07.451] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:54:07.451] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:54:07.451] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:54:07.481] data.LB_FadeInType0=100 [2025-09-24 04:54:07.481] data.CHLH_FadeInType0=0 [2025-09-24 04:54:07.481] data.WU_FadeInDelay=0 [2025-09-24 04:54:07.481] max_time_out=0 [2025-09-24 04:54:07.481] No splash screen [2025-09-24 04:54:07.481] stop dss Done [2025-09-24 04:54:07.513] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:54:07.554] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:54:07.554] /dev/mem opened. [2025-09-24 04:54:07.554] Memory mapped at address 0xffffb9544000. [2025-09-24 04:54:07.554] Read at address 0x00600018 (0xffffb9544018): 0x00000000 [2025-09-24 04:54:07.554] Write at address 0x00600018 (0xffffb9544018): 0x00400040, readback 0x00400040 [2025-09-24 04:54:07.745] Loaded PowerVR consumer services. [2025-09-24 04:54:07.858] Waiting data available... [2025-09-24 04:54:07.874] 512+0 records in [2025-09-24 04:54:07.874] 512+0 records out [2025-09-24 04:54:07.905] Starting syslogd/klogd: done [2025-09-24 04:54:07.922] DML Start [2025-09-24 04:54:08.097] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:54:08.273] DML res1: 0 [2025-09-24 04:54:08.762] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:54:08.762] Read Success [2025-09-24 04:54:08.762] Verifying certificate... [2025-09-24 04:54:09.018] Verified OK [2025-09-24 04:54:09.051] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:54:10.786] Verified OK [2025-09-24 04:54:10.786] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:54:11.377] Verified OK [2025-09-24 04:54:11.377] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:54:13.903] fs.protected_hardlinks = 1 [2025-09-24 04:54:13.918] fs.protected_symlinks = 1 [2025-09-24 04:54:13.918] kernel.modules_disabled = 1 [2025-09-24 04:54:14.110] [2025-09-24 04:54:14.110] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:54:15.320] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:54:23.144] SBL1:1210.0.1.0 [2025-09-24 04:54:23.175] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:54:24.758] SBL2:1210.0.1.0 [2025-09-24 04:54:24.790] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:54:24.902] j-A [2025-09-24 04:54:32.277] The R5 Autosar Classic is running [2025-09-24 04:54:32.277] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:54:32.277] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:54:32.885] INIT: version 2.96 booting [2025-09-24 04:54:32.980] INIT: Entering runlevel: 5 [2025-09-24 04:54:33.140] mtd24 attached [2025-09-24 04:54:33.156] mtd32 attached [2025-09-24 04:54:33.172] mtd28 attached [2025-09-24 04:54:33.204] ubi0:textures is mounted. [2025-09-24 04:54:33.220] RTNETLINK answers: File exists [2025-09-24 04:54:33.257] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:54:33.257] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:54:33.257] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:54:33.257] ubi1:dml_code is mounted. [2025-09-24 04:54:33.257] ubi2:animations is mounted. [2025-09-24 04:54:33.257] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:54:33.257] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:54:33.280] data.LB_FadeInType0=100 [2025-09-24 04:54:33.280] data.CHLH_FadeInType0=0 [2025-09-24 04:54:33.280] data.WU_FadeInDelay=0 [2025-09-24 04:54:33.280] max_time_out=0 [2025-09-24 04:54:33.280] No splash screen [2025-09-24 04:54:33.280] stop dss Done [2025-09-24 04:54:33.312] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:54:33.328] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:54:33.328] /dev/mem opened. [2025-09-24 04:54:33.355] Memory mapped at address 0xffffa507e000. [2025-09-24 04:54:33.355] Read at address 0x00600018 (0xffffa507e018): 0x00000000 [2025-09-24 04:54:33.355] Write at address 0x00600018 (0xffffa507e018): 0x00400040, readback 0x00400040 [2025-09-24 04:54:33.451] Loaded PowerVR consumer services. [2025-09-24 04:54:33.627] Waiting data available... [2025-09-24 04:54:33.643] 512+0 records in [2025-09-24 04:54:33.643] 512+0 records out [2025-09-24 04:54:33.690] Starting syslogd/klogd: done [2025-09-24 04:54:33.706] DML Start [2025-09-24 04:54:33.930] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:54:34.122] DML res1: 0 [2025-09-24 04:54:34.584] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:54:34.584] Read Success [2025-09-24 04:54:34.584] Verifying certificate... [2025-09-24 04:54:34.824] Verified OK [2025-09-24 04:54:34.839] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:54:36.532] Verified OK [2025-09-24 04:54:36.532] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:54:37.100] Verified OK [2025-09-24 04:54:37.100] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:54:39.689] fs.protected_hardlinks = 1 [2025-09-24 04:54:39.716] fs.protected_symlinks = 1 [2025-09-24 04:54:39.716] kernel.modules_disabled = 1 [2025-09-24 04:54:39.907] [2025-09-24 04:54:39.907] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:54:41.138] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:54:48.956] SBL1:1210.0.1.0 [2025-09-24 04:54:49.004] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:54:50.570] SBL2:1210.0.1.0 [2025-09-24 04:54:50.618] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:54:50.714] j-A [2025-09-24 04:54:58.069] The R5 Autosar Classic is running [2025-09-24 04:54:58.092] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:54:58.092] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:54:58.700] INIT: version 2.96 booting [2025-09-24 04:54:58.812] INIT: Entering runlevel: 5 [2025-09-24 04:54:58.972] mtd24 attached [2025-09-24 04:54:58.988] mtd28 attached [2025-09-24 04:54:59.004] mtd32 attached [2025-09-24 04:54:59.004] ubi0:textures is mounted. [2025-09-24 04:54:59.036] RTNETLINK answers: File exists [2025-09-24 04:54:59.099] ubi1:animations is mounted. [2025-09-24 04:54:59.099] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:54:59.099] ubi2:dml_code is mounted. [2025-09-24 04:54:59.099] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:54:59.099] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:54:59.099] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:54:59.099] data.LB_FadeInType0=100 [2025-09-24 04:54:59.099] data.CHLH_FadeInType0=0 [2025-09-24 04:54:59.099] data.WU_FadeInDelay=0 [2025-09-24 04:54:59.099] max_time_out=0 [2025-09-24 04:54:59.099] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:54:59.099] No splash screen [2025-09-24 04:54:59.099] stop dss Done [2025-09-24 04:54:59.187] /dev/mem opened. [2025-09-24 04:54:59.187] Memory mapped at address 0xffffb1d23000. [2025-09-24 04:54:59.187] Read at address 0x00600018 (0xffffb1d23018): 0x00000000 [2025-09-24 04:54:59.187] Write at address 0x00600018 (0xffffb1d23018): 0x00400040, readback 0x00400040 [2025-09-24 04:54:59.187] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:54:59.187] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:54:59.315] Loaded PowerVR consumer services. [2025-09-24 04:54:59.443] Waiting data available... [2025-09-24 04:54:59.475] 512+0 records in [2025-09-24 04:54:59.475] 512+0 records out [2025-09-24 04:54:59.507] Starting syslogd/klogd: done [2025-09-24 04:54:59.523] DML Start [2025-09-24 04:54:59.715] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:54:59.922] DML res1: 0 [2025-09-24 04:55:00.392] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:55:00.392] Read Success [2025-09-24 04:55:00.392] Verifying certificate... [2025-09-24 04:55:00.664] Verified OK [2025-09-24 04:55:00.680] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:55:02.275] Verified OK [2025-09-24 04:55:02.275] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:55:02.824] Verified OK [2025-09-24 04:55:02.824] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:55:05.575] fs.protected_hardlinks = 1 [2025-09-24 04:55:05.575] fs.protected_symlinks = 1 [2025-09-24 04:55:05.590] kernel.modules_disabled = 1 [2025-09-24 04:55:05.798] [2025-09-24 04:55:05.798] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:55:06.927] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:55:14.888] SBL1:1210.0.1.0 [2025-09-24 04:55:14.936] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:55:16.503] SBL2:1210.0.1.0 [2025-09-24 04:55:16.551] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:55:16.663] j-A [2025-09-24 04:55:24.002] The R5 Autosar Classic is running [2025-09-24 04:55:24.027] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:55:24.027] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:55:24.634] INIT: version 2.96 booting [2025-09-24 04:55:24.746] INIT: Entering runlevel: 5 [2025-09-24 04:55:24.890] mtd28 attached [2025-09-24 04:55:24.906] mtd32 attached [2025-09-24 04:55:24.922] mtd24 attached [2025-09-24 04:55:24.954] ubi0:animations is mounted. [2025-09-24 04:55:24.970] RTNETLINK answers: File exists [2025-09-24 04:55:24.970] ubi1:dml_code is mounted. [2025-09-24 04:55:25.032] ubi2:textures is mounted. [2025-09-24 04:55:25.032] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:55:25.032] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:55:25.032] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:55:25.032] data.LB_FadeInType0=100 [2025-09-24 04:55:25.032] data.CHLH_FadeInType0=0 [2025-09-24 04:55:25.032] data.WU_FadeInDelay=0 [2025-09-24 04:55:25.032] max_time_out=0 [2025-09-24 04:55:25.032] No splash screen [2025-09-24 04:55:25.032] stop dss Done [2025-09-24 04:55:25.032] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:55:25.032] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:55:25.099] /dev/mem opened. [2025-09-24 04:55:25.099] Memory mapped at address 0xffff97b88000. [2025-09-24 04:55:25.099] Read at address 0x00600018 (0xffff97b88018): 0x00000000 [2025-09-24 04:55:25.099] Write at address 0x00600018 (0xffff97b88018): 0x00400040, readback 0x00400040 [2025-09-24 04:55:25.131] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:55:25.147] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:55:25.395] Waiting data available... [2025-09-24 04:55:25.395] Loaded PowerVR consumer services. [2025-09-24 04:55:25.411] 512+0 records in [2025-09-24 04:55:25.411] 512+0 records out [2025-09-24 04:55:25.443] Starting syslogd/klogd: done [2025-09-24 04:55:25.459] DML Start [2025-09-24 04:55:25.651] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:55:25.875] DML res1: 0 [2025-09-24 04:55:26.290] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:55:26.290] Read Success [2025-09-24 04:55:26.306] Verifying certificate... [2025-09-24 04:55:26.610] Verified OK [2025-09-24 04:55:26.626] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:55:28.172] Verified OK [2025-09-24 04:55:28.172] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:55:28.819] Verified OK [2025-09-24 04:55:28.819] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:55:31.490] fs.protected_hardlinks = 1 [2025-09-24 04:55:31.490] fs.protected_symlinks = 1 [2025-09-24 04:55:31.505] kernel.modules_disabled = 1 [2025-09-24 04:55:31.697] [2025-09-24 04:55:31.697] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:55:32.848] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:55:40.799] SBL1:1210.0.1.0 [2025-09-24 04:55:40.847] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:55:42.415] SBL2:1210.0.1.0 [2025-09-24 04:55:42.463] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:55:42.574] j-A [2025-09-24 04:55:49.913] The R5 Autosar Classic is running [2025-09-24 04:55:49.938] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:55:49.938] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:55:50.545] INIT: version 2.96 booting [2025-09-24 04:55:50.657] INIT: Entering runlevel: 5 [2025-09-24 04:55:50.817] mtd28 attached [2025-09-24 04:55:50.817] mtd24 attached [2025-09-24 04:55:50.849] ubi0:animations is mounted. [2025-09-24 04:55:50.865] mtd32 attached [2025-09-24 04:55:50.881] ubi1:textures is mounted. [2025-09-24 04:55:50.897] RTNETLINK answers: File exists [2025-09-24 04:55:50.897] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:55:50.942] ubi2:dml_code is mounted. [2025-09-24 04:55:50.942] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:55:50.942] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:55:50.942] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:55:50.942] data.LB_FadeInType0=100 [2025-09-24 04:55:50.942] data.CHLH_FadeInType0=0 [2025-09-24 04:55:50.942] data.WU_FadeInDelay=0 [2025-09-24 04:55:50.942] max_time_out=0 [2025-09-24 04:55:50.942] No splash screen [2025-09-24 04:55:50.942] stop dss Done [2025-09-24 04:55:50.942] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:55:51.012] /dev/mem opened. [2025-09-24 04:55:51.012] Memory mapped at address 0xffff897fd000. [2025-09-24 04:55:51.012] Read at address 0x00600018 (0xffff897fd018): 0x00000000 [2025-09-24 04:55:51.012] Write at address 0x00600018 (0xffff897fd018): 0x00400040, readback 0x00400040 [2025-09-24 04:55:51.012] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:55:51.028] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:55:51.284] Waiting data available... [2025-09-24 04:55:51.300] Loaded PowerVR consumer services. [2025-09-24 04:55:51.332] 512+0 records in [2025-09-24 04:55:51.332] 512+0 records out [2025-09-24 04:55:51.364] Starting syslogd/klogd: done [2025-09-24 04:55:51.380] DML Start [2025-09-24 04:55:51.556] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:55:51.812] DML res1: 0 [2025-09-24 04:55:52.147] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:55:52.163] Read Success [2025-09-24 04:55:52.163] Verifying certificate... [2025-09-24 04:55:52.419] Verified OK [2025-09-24 04:55:52.435] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:55:54.147] Verified OK [2025-09-24 04:55:54.147] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:55:54.827] Verified OK [2025-09-24 04:55:54.827] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:55:57.337] fs.protected_hardlinks = 1 [2025-09-24 04:55:57.353] fs.protected_symlinks = 1 [2025-09-24 04:55:57.353] kernel.modules_disabled = 1 [2025-09-24 04:55:57.561] [2025-09-24 04:55:57.561] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:55:58.851] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:56:06.925] SBL1:1210.0.1.0 [2025-09-24 04:56:06.973] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:56:08.539] SBL2:1210.0.1.0 [2025-09-24 04:56:08.587] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:56:08.699] j-A [2025-09-24 04:56:16.070] The R5 Autosar Classic is running [2025-09-24 04:56:16.070] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:56:16.070] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:56:16.677] INIT: version 2.96 booting [2025-09-24 04:56:16.789] INIT: Entering runlevel: 5 [2025-09-24 04:56:16.949] mtd28 attached [2025-09-24 04:56:16.949] mtd32 attached [2025-09-24 04:56:16.964] mtd24 attached [2025-09-24 04:56:16.996] ubi0:animations is mounted. [2025-09-24 04:56:17.012] RTNETLINK answers: File exists [2025-09-24 04:56:17.071] ubi1:dml_code is mounted. [2025-09-24 04:56:17.071] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:56:17.071] ubi2:textures is mounted. [2025-09-24 04:56:17.071] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:56:17.071] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:56:17.071] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:56:17.071] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:56:17.071] data.LB_FadeInType0=100 [2025-09-24 04:56:17.071] data.CHLH_FadeInType0=0 [2025-09-24 04:56:17.071] data.WU_FadeInDelay=0 [2025-09-24 04:56:17.071] max_time_out=0 [2025-09-24 04:56:17.071] No splash screen [2025-09-24 04:56:17.071] stop dss Done [2025-09-24 04:56:17.103] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:56:17.103] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:56:17.135] /dev/mem opened. [2025-09-24 04:56:17.135] Memory mapped at address 0xffff89814000. [2025-09-24 04:56:17.161] Read at address 0x00600018 (0xffff89814018): 0x00000000 [2025-09-24 04:56:17.161] Write at address 0x00600018 (0xffff89814018): 0x00400040, readback 0x00400040 [2025-09-24 04:56:17.353] Loaded PowerVR consumer services. [2025-09-24 04:56:17.464] Waiting data available... [2025-09-24 04:56:17.513] 512+0 records in [2025-09-24 04:56:17.513] 512+0 records out [2025-09-24 04:56:17.529] Starting syslogd/klogd: done [2025-09-24 04:56:17.545] DML Start [2025-09-24 04:56:17.704] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:56:17.945] DML res1: 0 [2025-09-24 04:56:18.403] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:56:18.403] Read Success [2025-09-24 04:56:18.403] Verifying certificate... [2025-09-24 04:56:18.627] Verified OK [2025-09-24 04:56:18.643] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:56:20.272] Verified OK [2025-09-24 04:56:20.272] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:56:20.816] Verified OK [2025-09-24 04:56:20.816] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:56:23.550] fs.protected_hardlinks = 1 [2025-09-24 04:56:23.566] fs.protected_symlinks = 1 [2025-09-24 04:56:23.566] kernel.modules_disabled = 1 [2025-09-24 04:56:23.757] [2025-09-24 04:56:23.757] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:56:25.004] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:56:32.786] SBL1:1210.0.1.0 [2025-09-24 04:56:32.834] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:56:34.402] SBL2:1210.0.1.0 [2025-09-24 04:56:34.450] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:56:34.561] j-A [2025-09-24 04:56:41.935] The R5 Autosar Classic is running [2025-09-24 04:56:41.935] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:56:41.935] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:56:42.542] INIT: version 2.96 booting [2025-09-24 04:56:42.653] INIT: Entering runlevel: 5 [2025-09-24 04:56:42.798] mtd28 attached [2025-09-24 04:56:42.813] mtd24 attached [2025-09-24 04:56:42.829] mtd32 attached [2025-09-24 04:56:42.861] ubi0:animations is mounted. [2025-09-24 04:56:42.877] RTNETLINK answers: File exists [2025-09-24 04:56:42.939] ubi1:textures is mounted. [2025-09-24 04:56:42.939] ubi2:dml_code is mounted. [2025-09-24 04:56:42.939] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:56:42.939] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:56:42.939] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:56:42.939] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:56:42.939] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:56:42.939] data.LB_FadeInType0=100 [2025-09-24 04:56:42.939] data.CHLH_FadeInType0=0 [2025-09-24 04:56:42.939] data.WU_FadeInDelay=0 [2025-09-24 04:56:42.939] max_time_out=0 [2025-09-24 04:56:42.939] No splash screen [2025-09-24 04:56:42.939] stop dss Done [2025-09-24 04:56:43.016] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:56:43.016] /dev/mem opened. [2025-09-24 04:56:43.016] Memory mapped at address 0xffff888c2000. [2025-09-24 04:56:43.016] Read at address 0x00600018 (0xffff888c2018): 0x00000000 [2025-09-24 04:56:43.016] Write at address 0x00600018 (0xffff888c2018): 0x00400040, readback 0x00400040 [2025-09-24 04:56:43.016] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:56:43.127] Loaded PowerVR consumer services. [2025-09-24 04:56:43.303] Waiting data available... [2025-09-24 04:56:43.319] 512+0 records in [2025-09-24 04:56:43.319] 512+0 records out [2025-09-24 04:56:43.367] Starting syslogd/klogd: done [2025-09-24 04:56:43.383] DML Start [2025-09-24 04:56:43.559] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:56:43.783] DML res1: 0 [2025-09-24 04:56:44.246] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:56:44.246] Read Success [2025-09-24 04:56:44.246] Verifying certificate... [2025-09-24 04:56:44.470] Verified OK [2025-09-24 04:56:44.486] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:56:46.029] Verified OK [2025-09-24 04:56:46.029] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:56:46.653] Verified OK [2025-09-24 04:56:46.653] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:56:49.308] fs.protected_hardlinks = 1 [2025-09-24 04:56:49.323] fs.protected_symlinks = 1 [2025-09-24 04:56:49.323] kernel.modules_disabled = 1 [2025-09-24 04:56:49.515] [2025-09-24 04:56:49.515] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:56:50.817] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:56:58.665] SBL1:1210.0.1.0 [2025-09-24 04:56:58.713] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:57:00.279] SBL2:1210.0.1.0 [2025-09-24 04:57:00.328] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:57:00.439] j-A [2025-09-24 04:57:07.777] The R5 Autosar Classic is running [2025-09-24 04:57:07.808] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:57:07.808] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:57:08.415] INIT: version 2.96 booting [2025-09-24 04:57:08.527] INIT: Entering runlevel: 5 [2025-09-24 04:57:08.687] mtd32 attached [2025-09-24 04:57:08.687] mtd24 attached [2025-09-24 04:57:08.703] mtd28 attached [2025-09-24 04:57:08.751] RTNETLINK answers: File exists [2025-09-24 04:57:08.751] ubi0:dml_code is mounted. [2025-09-24 04:57:08.808] ubi1:textures is mounted. [2025-09-24 04:57:08.808] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:57:08.808] ubi2:animations is mounted. [2025-09-24 04:57:08.808] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:57:08.808] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:57:08.808] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:57:08.808] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:57:08.808] data.LB_FadeInType0=100 [2025-09-24 04:57:08.808] data.CHLH_FadeInType0=0 [2025-09-24 04:57:08.808] data.WU_FadeInDelay=0 [2025-09-24 04:57:08.808] max_time_out=0 [2025-09-24 04:57:08.808] No splash screen [2025-09-24 04:57:08.808] stop dss Done [2025-09-24 04:57:08.840] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:57:08.878] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:57:08.878] /dev/mem opened. [2025-09-24 04:57:08.878] Memory mapped at address 0xffff8b524000. [2025-09-24 04:57:08.878] Read at address 0x00600018 (0xffff8b524018): 0x00000000 [2025-09-24 04:57:08.878] Write at address 0x00600018 (0xffff8b524018): 0x00400040, readback 0x00400040 [2025-09-24 04:57:09.164] Loaded PowerVR consumer services. [2025-09-24 04:57:09.164] Waiting data available... [2025-09-24 04:57:09.180] 512+0 records in [2025-09-24 04:57:09.180] 512+0 records out [2025-09-24 04:57:09.227] Starting syslogd/klogd: done [2025-09-24 04:57:09.243] DML Start [2025-09-24 04:57:09.403] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:57:09.644] DML res1: 0 [2025-09-24 04:57:10.107] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:57:10.128] Read Success [2025-09-24 04:57:10.128] Verifying certificate... [2025-09-24 04:57:10.400] Verified OK [2025-09-24 04:57:10.432] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:57:12.109] Verified OK [2025-09-24 04:57:12.109] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:57:12.778] Verified OK [2025-09-24 04:57:12.778] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:57:15.401] fs.protected_hardlinks = 1 [2025-09-24 04:57:15.401] fs.protected_symlinks = 1 [2025-09-24 04:57:15.416] kernel.modules_disabled = 1 [2025-09-24 04:57:15.609] [2025-09-24 04:57:15.609] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:57:16.674] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:57:24.533] SBL1:1210.0.1.0 [2025-09-24 04:57:24.581] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:57:26.148] SBL2:1210.0.1.0 [2025-09-24 04:57:26.196] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:57:26.307] j-A [2025-09-24 04:57:33.679] The R5 Autosar Classic is running [2025-09-24 04:57:33.679] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:57:33.679] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:57:34.286] INIT: version 2.96 booting [2025-09-24 04:57:34.399] INIT: Entering runlevel: 5 [2025-09-24 04:57:34.558] mtd24 attached [2025-09-24 04:57:34.574] mtd32 attached [2025-09-24 04:57:34.574] mtd28 attached [2025-09-24 04:57:34.606] ubi0:textures is mounted. [2025-09-24 04:57:34.690] RTNETLINK answers: File exists [2025-09-24 04:57:34.690] ubi2:animations is mounted. [2025-09-24 04:57:34.690] ubi1:dml_code is mounted. [2025-09-24 04:57:34.690] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:57:34.690] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:57:34.690] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:57:34.690] data.LB_FadeInType0=100 [2025-09-24 04:57:34.690] data.CHLH_FadeInType0=0 [2025-09-24 04:57:34.690] data.WU_FadeInDelay=0 [2025-09-24 04:57:34.690] max_time_out=0 [2025-09-24 04:57:34.690] No splash screen [2025-09-24 04:57:34.690] stop dss Done [2025-09-24 04:57:34.690] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:57:34.690] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:57:34.761] /dev/mem opened. [2025-09-24 04:57:34.761] Memory mapped at address 0xffff90927000. [2025-09-24 04:57:34.761] Read at address 0x00600018 (0xffff90927018): 0x00000000 [2025-09-24 04:57:34.761] Write at address 0x00600018 (0xffff90927018): 0x00400040, readback 0x00400040 [2025-09-24 04:57:34.790] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:57:34.790] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:57:34.950] Loaded PowerVR consumer services. [2025-09-24 04:57:35.046] Waiting data available... [2025-09-24 04:57:35.062] 512+0 records in [2025-09-24 04:57:35.062] 512+0 records out [2025-09-24 04:57:35.094] Starting syslogd/klogd: done [2025-09-24 04:57:35.109] DML Start [2025-09-24 04:57:35.270] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:57:35.477] DML res1: 0 [2025-09-24 04:57:35.946] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:57:35.946] Read Success [2025-09-24 04:57:35.946] Verifying certificate... [2025-09-24 04:57:36.185] Verified OK [2025-09-24 04:57:36.202] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:57:37.889] Verified OK [2025-09-24 04:57:37.889] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:57:38.549] Verified OK [2025-09-24 04:57:38.549] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:57:41.123] fs.protected_hardlinks = 1 [2025-09-24 04:57:41.123] fs.protected_symlinks = 1 [2025-09-24 04:57:41.123] kernel.modules_disabled = 1 [2025-09-24 04:57:41.331] [2025-09-24 04:57:41.331] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:57:42.518] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:57:50.377] SBL1:1210.0.1.0 [2025-09-24 04:57:50.425] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:57:51.993] SBL2:1210.0.1.0 [2025-09-24 04:57:52.040] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:57:52.152] j-A [2025-09-24 04:57:59.490] The R5 Autosar Classic is running [2025-09-24 04:57:59.515] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:57:59.515] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:58:00.123] INIT: version 2.96 booting [2025-09-24 04:58:00.235] INIT: Entering runlevel: 5 [2025-09-24 04:58:00.378] mtd24 attached [2025-09-24 04:58:00.394] mtd28 attached [2025-09-24 04:58:00.410] mtd32 attached [2025-09-24 04:58:00.426] ubi0:textures is mounted. [2025-09-24 04:58:00.458] ubi1:animations is mounted. [2025-09-24 04:58:00.458] RTNETLINK answers: File exists [2025-09-24 04:58:00.520] ubi2:dml_code is mounted. [2025-09-24 04:58:00.520] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:58:00.520] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:58:00.520] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:58:00.520] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:58:00.520] data.LB_FadeInType0=100 [2025-09-24 04:58:00.520] data.CHLH_FadeInType0=0 [2025-09-24 04:58:00.520] data.WU_FadeInDelay=0 [2025-09-24 04:58:00.520] max_time_out=0 [2025-09-24 04:58:00.520] No splash screen [2025-09-24 04:58:00.520] stop dss Done [2025-09-24 04:58:00.520] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:58:00.552] /dev/mem opened. [2025-09-24 04:58:00.552] Memory mapped at address 0xffffaba5c000. [2025-09-24 04:58:00.597] Read at address 0x00600018 (0xffffaba5c018): 0x00000000 [2025-09-24 04:58:00.597] Write at address 0x00600018 (0xffffaba5c018): 0x00400040, readback 0x00400040 [2025-09-24 04:58:00.597] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:58:00.597] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:58:00.692] Loaded PowerVR consumer services. [2025-09-24 04:58:00.853] Waiting data available... [2025-09-24 04:58:00.885] 512+0 records in [2025-09-24 04:58:00.885] 512+0 records out [2025-09-24 04:58:00.932] Starting syslogd/klogd: done [2025-09-24 04:58:00.948] DML Start [2025-09-24 04:58:01.091] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:58:01.268] DML res1: 0 [2025-09-24 04:58:01.844] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:58:01.865] Read Success [2025-09-24 04:58:01.865] Verifying certificate... [2025-09-24 04:58:02.120] Verified OK [2025-09-24 04:58:02.136] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:58:03.879] Verified OK [2025-09-24 04:58:03.879] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:58:04.400] Verified OK [2025-09-24 04:58:04.400] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:58:06.798] fs.protected_hardlinks = 1 [2025-09-24 04:58:06.798] fs.protected_symlinks = 1 [2025-09-24 04:58:06.814] kernel.modules_disabled = 1 [2025-09-24 04:58:07.006] [2025-09-24 04:58:07.006] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:58:08.376] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:58:16.252] SBL1:1210.0.1.0 [2025-09-24 04:58:16.283] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:58:17.867] SBL2:1210.0.1.0 [2025-09-24 04:58:17.914] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:58:18.010] j-A [2025-09-24 04:58:25.365] The R5 Autosar Classic is running [2025-09-24 04:58:25.365] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:58:25.386] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:58:25.993] INIT: version 2.96 booting [2025-09-24 04:58:26.105] INIT: Entering runlevel: 5 [2025-09-24 04:58:26.265] mtd32 attached [2025-09-24 04:58:26.265] mtd24 attached [2025-09-24 04:58:26.281] mtd28 attached [2025-09-24 04:58:26.341] ubi1:textures is mounted. [2025-09-24 04:58:26.341] ubi0:dml_code is mounted. [2025-09-24 04:58:26.341] RTNETLINK answers: File exists [2025-09-24 04:58:26.342] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:58:26.395] ubi2:animations is mounted. [2025-09-24 04:58:26.395] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:58:26.395] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:58:26.395] data.LB_FadeInType0=100 [2025-09-24 04:58:26.395] data.CHLH_FadeInType0=0 [2025-09-24 04:58:26.395] data.WU_FadeInDelay=0 [2025-09-24 04:58:26.395] max_time_out=0 [2025-09-24 04:58:26.395] No splash screen [2025-09-24 04:58:26.395] stop dss Done [2025-09-24 04:58:26.395] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:58:26.395] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:58:26.426] /dev/mem opened. [2025-09-24 04:58:26.459] Memory mapped at address 0xffffb9377000. [2025-09-24 04:58:26.459] Read at address 0x00600018 (0xffffb9377018): 0x00000000 [2025-09-24 04:58:26.459] Write at address 0x00600018 (0xffffb9377018): 0x00400040, readback 0x00400040 [2025-09-24 04:58:26.475] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:58:26.475] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:58:26.683] Loaded PowerVR consumer services. [2025-09-24 04:58:26.746] Waiting data available... [2025-09-24 04:58:26.778] 512+0 records in [2025-09-24 04:58:26.778] 512+0 records out [2025-09-24 04:58:26.810] Starting syslogd/klogd: done [2025-09-24 04:58:26.826] DML Start [2025-09-24 04:58:26.971] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:58:27.162] DML res1: 0 [2025-09-24 04:58:27.654] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:58:27.654] Read Success [2025-09-24 04:58:27.654] Verifying certificate... [2025-09-24 04:58:27.878] Verified OK [2025-09-24 04:58:27.894] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:58:29.550] Verified OK [2025-09-24 04:58:29.550] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:58:30.077] Verified OK [2025-09-24 04:58:30.094] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:58:32.668] fs.protected_hardlinks = 1 [2025-09-24 04:58:32.668] fs.protected_symlinks = 1 [2025-09-24 04:58:32.684] kernel.modules_disabled = 1 [2025-09-24 04:58:32.859] [2025-09-24 04:58:32.859] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:58:34.261] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:58:42.122] SBL1:1210.0.1.0 [2025-09-24 04:58:42.170] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:58:43.737] SBL2:1210.0.1.0 [2025-09-24 04:58:43.785] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:58:43.896] j-A [2025-09-24 04:58:51.237] The R5 Autosar Classic is running [2025-09-24 04:58:51.268] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:58:51.268] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:58:51.875] INIT: version 2.96 booting [2025-09-24 04:58:51.987] INIT: Entering runlevel: 5 [2025-09-24 04:58:52.131] mtd32 attached [2025-09-24 04:58:52.147] mtd24 attached [2025-09-24 04:58:52.163] mtd28 attached [2025-09-24 04:58:52.195] ubi0:dml_code is mounted. [2025-09-24 04:58:52.211] RTNETLINK answers: File exists [2025-09-24 04:58:52.211] ubi1:textures is mounted. [2025-09-24 04:58:52.241] ubi2:animations is mounted. [2025-09-24 04:58:52.241] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:58:52.241] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:58:52.241] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:58:52.241] data.LB_FadeInType0=100 [2025-09-24 04:58:52.277] data.CHLH_FadeInType0=0 [2025-09-24 04:58:52.277] data.WU_FadeInDelay=0 [2025-09-24 04:58:52.277] max_time_out=0 [2025-09-24 04:58:52.277] No splash screen [2025-09-24 04:58:52.277] stop dss Done [2025-09-24 04:58:52.277] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:58:52.277] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:58:52.330] /dev/mem opened. [2025-09-24 04:58:52.330] Memory mapped at address 0xffffb0f74000. [2025-09-24 04:58:52.330] Read at address 0x00600018 (0xffffb0f74018): 0x00000000 [2025-09-24 04:58:52.330] Write at address 0x00600018 (0xffffb0f74018): 0x00400040, readback 0x00400040 [2025-09-24 04:58:52.375] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:58:52.375] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:58:52.440] Loaded PowerVR consumer services. [2025-09-24 04:58:52.615] Waiting data available... [2025-09-24 04:58:52.648] 512+0 records in [2025-09-24 04:58:52.648] 512+0 records out [2025-09-24 04:58:52.696] Starting syslogd/klogd: done [2025-09-24 04:58:52.712] DML Start [2025-09-24 04:58:52.888] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:58:53.111] DML res1: 0 [2025-09-24 04:58:53.511] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:58:53.527] Read Success [2025-09-24 04:58:53.527] Verifying certificate... [2025-09-24 04:58:53.814] Verified OK [2025-09-24 04:58:53.830] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:58:55.413] Verified OK [2025-09-24 04:58:55.429] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:58:56.078] Verified OK [2025-09-24 04:58:56.078] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:58:56.813] 5457 GC [0] [2025-09-24 04:58:56.877] 5528 GC [1] [2025-09-24 04:58:56.956] 5601 GC [2] [2025-09-24 04:58:57.021] 5668 GC [3] [2025-09-24 04:58:57.085] 5740 GC [4] [2025-09-24 04:58:57.164] 5812 GC [5] [2025-09-24 04:58:57.228] 5880 GC [6] [2025-09-24 04:58:57.292] 5951 GC [7] [2025-09-24 04:58:57.373] 6018 GC [8] [2025-09-24 04:58:57.437] 6081 GC [9] [2025-09-24 04:58:57.500] 6152 GC [10] [2025-09-24 04:58:57.564] 6209 GC [11] [2025-09-24 04:58:57.628] 6278 GC [12] [2025-09-24 04:58:57.692] 6340 GC [13] [2025-09-24 04:58:57.740] 6402 GC [14] [2025-09-24 04:58:57.804] 6460 GC [15] [2025-09-24 04:58:57.868] 6510 GC [16] [2025-09-24 04:58:57.931] 6578 GC [17] [2025-09-24 04:58:57.980] 6629 GC [18] [2025-09-24 04:58:58.044] 6697 GC [19] [2025-09-24 04:58:58.108] 6760 GC [20] [2025-09-24 04:58:58.171] 6821 GC [21] [2025-09-24 04:58:58.220] 6879 GC [22] [2025-09-24 04:58:58.283] 6930 GC [23] [2025-09-24 04:58:58.347] 6987 GC [24] [2025-09-24 04:58:58.412] 7070 GC [25] [2025-09-24 04:58:58.476] 7121 GC [26] [2025-09-24 04:58:58.539] 7179 GC [27] [2025-09-24 04:58:58.603] 7250 GC [28] [2025-09-24 04:58:58.603] 7250 GC [29] [2025-09-24 04:58:58.651] fs.protected_hardlinks = 1 [2025-09-24 04:58:58.678] fs.protected_symlinks = 1 [2025-09-24 04:58:58.678] kernel.modules_disabled = 1 [2025-09-24 04:58:58.678] GC DONE [2025-09-24 04:58:58.853] [2025-09-24 04:58:58.853] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:59:00.034] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:59:07.973] SBL1:1210.0.1.0 [2025-09-24 04:59:08.021] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:59:09.587] SBL2:1210.0.1.0 [2025-09-24 04:59:09.619] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 04:59:09.732] j-A [2025-09-24 04:59:17.108] The R5 Autosar Classic is running [2025-09-24 04:59:17.108] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:59:17.108] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:59:17.716] INIT: version 2.96 booting [2025-09-24 04:59:17.812] INIT: Entering runlevel: 5 [2025-09-24 04:59:17.973] mtd28 attached [2025-09-24 04:59:17.989] mtd32 attached [2025-09-24 04:59:17.989] mtd24 attached [2025-09-24 04:59:18.036] RTNETLINK answers: File exists [2025-09-24 04:59:18.088] ubi0:animations is mounted. [2025-09-24 04:59:18.088] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:59:18.088] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:59:18.088] ubi1:dml_code is mounted. [2025-09-24 04:59:18.088] ubi2:textures is mounted. [2025-09-24 04:59:18.088] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:59:18.088] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:59:18.088] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:59:18.088] data.LB_FadeInType0=100 [2025-09-24 04:59:18.088] data.CHLH_FadeInType0=0 [2025-09-24 04:59:18.109] data.WU_FadeInDelay=0 [2025-09-24 04:59:18.109] max_time_out=0 [2025-09-24 04:59:18.109] No splash screen [2025-09-24 04:59:18.109] stop dss Done [2025-09-24 04:59:18.157] /dev/mem opened. [2025-09-24 04:59:18.157] Memory mapped at address 0xffffb4dfe000. [2025-09-24 04:59:18.197] Read at address 0x00600018 (0xffffb4dfe018): 0x00000000 [2025-09-24 04:59:18.197] Write at address 0x00600018 (0xffffb4dfe018): 0x00400040, readback 0x00400040 [2025-09-24 04:59:18.197] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:59:18.197] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:59:18.357] Loaded PowerVR consumer services. [2025-09-24 04:59:18.373] 512+0 records in [2025-09-24 04:59:18.373] 512+0 records out [2025-09-24 04:59:18.421] Starting syslogd/klogd: done [2025-09-24 04:59:18.485] Waiting data available... [2025-09-24 04:59:18.485] DML Start [2025-09-24 04:59:18.677] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:59:18.900] DML res1: 0 [2025-09-24 04:59:19.360] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:59:19.360] Read Success [2025-09-24 04:59:19.360] Verifying certificate... [2025-09-24 04:59:19.600] Verified OK [2025-09-24 04:59:19.616] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:59:21.351] Verified OK [2025-09-24 04:59:21.351] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:59:22.005] Verified OK [2025-09-24 04:59:22.006] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:59:24.611] fs.protected_hardlinks = 1 [2025-09-24 04:59:24.627] fs.protected_symlinks = 1 [2025-09-24 04:59:24.627] kernel.modules_disabled = 1 [2025-09-24 04:59:24.819] [2025-09-24 04:59:24.819] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:59:25.963] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:59:33.834] SBL1:1210.0.1.0 [2025-09-24 04:59:33.882] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:59:35.448] SBL2:1210.0.1.0 [2025-09-24 04:59:35.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 04:59:35.592] j-A [2025-09-24 04:59:42.967] The R5 Autosar Classic is running [2025-09-24 04:59:42.967] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 04:59:42.967] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 04:59:43.575] INIT: version 2.96 booting [2025-09-24 04:59:43.671] INIT: Entering runlevel: 5 [2025-09-24 04:59:43.831] mtd24 attached [2025-09-24 04:59:43.846] mtd32 attached [2025-09-24 04:59:43.862] mtd28 attached [2025-09-24 04:59:43.878] ubi0:textures is mounted. [2025-09-24 04:59:43.894] ubi1:dml_code is mounted. [2025-09-24 04:59:43.910] RTNETLINK answers: File exists [2025-09-24 04:59:43.965] ubi2:animations is mounted. [2025-09-24 04:59:43.965] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 04:59:43.965] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 04:59:43.965] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 04:59:43.965] data.LB_FadeInType0=100 [2025-09-24 04:59:43.965] data.CHLH_FadeInType0=0 [2025-09-24 04:59:43.965] data.WU_FadeInDelay=0 [2025-09-24 04:59:43.965] max_time_out=0 [2025-09-24 04:59:43.965] No splash screen [2025-09-24 04:59:43.965] stop dss Done [2025-09-24 04:59:43.965] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 04:59:43.965] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 04:59:44.013] /dev/mem opened. [2025-09-24 04:59:44.050] Memory mapped at address 0xffffbd073000. [2025-09-24 04:59:44.050] Read at address 0x00600018 (0xffffbd073018): 0x00000000 [2025-09-24 04:59:44.050] Write at address 0x00600018 (0xffffbd073018): 0x00400040, readback 0x00400040 [2025-09-24 04:59:44.050] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 04:59:44.050] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 04:59:44.130] Loaded PowerVR consumer services. [2025-09-24 04:59:44.271] 512+0 records in [2025-09-24 04:59:44.271] 512+0 records out [2025-09-24 04:59:44.271] Waiting data available... [2025-09-24 04:59:44.287] Starting syslogd/klogd: done [2025-09-24 04:59:44.303] DML Start [2025-09-24 04:59:44.480] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 04:59:44.703] DML res1: 0 [2025-09-24 04:59:45.180] Read DML Algo certificate (mtd31) and save to file [2025-09-24 04:59:45.180] Read Success [2025-09-24 04:59:45.180] Verifying certificate... [2025-09-24 04:59:45.403] Verified OK [2025-09-24 04:59:45.419] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 04:59:47.051] Verified OK [2025-09-24 04:59:47.051] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 04:59:47.761] Verified OK [2025-09-24 04:59:47.761] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 04:59:50.335] fs.protected_hardlinks = 1 [2025-09-24 04:59:50.335] fs.protected_symlinks = 1 [2025-09-24 04:59:50.352] kernel.modules_disabled = 1 [2025-09-24 04:59:50.543] [2025-09-24 04:59:50.543] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 04:59:51.826] RTNETLINK answers: Cannot assign requested address [2025-09-24 04:59:59.684] SBL1:1210.0.1.0 [2025-09-24 04:59:59.732] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:00:01.299] SBL2:1210.0.1.0 [2025-09-24 05:00:01.346] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:00:01.442] j-A [2025-09-24 05:00:08.797] The R5 Autosar Classic is running [2025-09-24 05:00:08.797] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:00:08.818] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:00:09.427] INIT: version 2.96 booting [2025-09-24 05:00:09.538] INIT: Entering runlevel: 5 [2025-09-24 05:00:09.698] mtd24 attached [2025-09-24 05:00:09.714] mtd32 attached [2025-09-24 05:00:09.714] mtd28 attached [2025-09-24 05:00:09.762] ubi0:textures is mounted. [2025-09-24 05:00:09.833] RTNETLINK answers: File exists [2025-09-24 05:00:09.833] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:00:09.833] ubi1:dml_code is mounted. [2025-09-24 05:00:09.833] ubi2:animations is mounted. [2025-09-24 05:00:09.833] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:00:09.833] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:00:09.833] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:00:09.833] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:00:09.833] data.LB_FadeInType0=100 [2025-09-24 05:00:09.833] data.CHLH_FadeInType0=0 [2025-09-24 05:00:09.833] data.WU_FadeInDelay=0 [2025-09-24 05:00:09.833] max_time_out=0 [2025-09-24 05:00:09.833] No splash screen [2025-09-24 05:00:09.833] stop dss Done [2025-09-24 05:00:09.909] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:00:09.909] /dev/mem opened. [2025-09-24 05:00:09.909] Memory mapped at address 0xffff92fcf000. [2025-09-24 05:00:09.909] Read at address 0x00600018 (0xffff92fcf018): 0x00000000 [2025-09-24 05:00:09.909] Write at address 0x00600018 (0xffff92fcf018): 0x00400040, readback 0x00400040 [2025-09-24 05:00:09.909] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:00:10.069] Loaded PowerVR consumer services. [2025-09-24 05:00:10.148] 512+0 records in [2025-09-24 05:00:10.148] 512+0 records out [2025-09-24 05:00:10.164] Waiting data available... [2025-09-24 05:00:10.196] Starting syslogd/klogd: done [2025-09-24 05:00:10.212] DML Start [2025-09-24 05:00:10.373] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:00:10.613] DML res1: 0 [2025-09-24 05:00:11.057] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:00:11.057] Read Success [2025-09-24 05:00:11.057] Verifying certificate... [2025-09-24 05:00:11.313] Verified OK [2025-09-24 05:00:11.329] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:00:12.976] Verified OK [2025-09-24 05:00:12.992] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:00:13.531] Verified OK [2025-09-24 05:00:13.531] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:00:16.071] fs.protected_hardlinks = 1 [2025-09-24 05:00:16.071] fs.protected_symlinks = 1 [2025-09-24 05:00:16.071] kernel.modules_disabled = 1 [2025-09-24 05:00:16.263] [2025-09-24 05:00:16.263] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:00:17.702] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:00:25.532] SBL1:1210.0.1.0 [2025-09-24 05:00:25.580] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:00:27.147] SBL2:1210.0.1.0 [2025-09-24 05:00:27.178] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:00:27.290] j-A [2025-09-24 05:00:34.662] The R5 Autosar Classic is running [2025-09-24 05:00:34.662] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:00:34.662] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:00:35.270] INIT: version 2.96 booting [2025-09-24 05:00:35.383] INIT: Entering runlevel: 5 [2025-09-24 05:00:35.526] mtd28 attached [2025-09-24 05:00:35.542] mtd24 attached [2025-09-24 05:00:35.574] ubi0:animations is mounted. [2025-09-24 05:00:35.590] ubi1:textures is mounted. [2025-09-24 05:00:35.590] mtd32 attached [2025-09-24 05:00:35.606] RTNETLINK answers: File exists [2025-09-24 05:00:35.645] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:00:35.645] ubi2:dml_code is mounted. [2025-09-24 05:00:35.645] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:00:35.646] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:00:35.646] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:00:35.646] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:00:35.646] data.LB_FadeInType0=100 [2025-09-24 05:00:35.666] data.CHLH_FadeInType0=0 [2025-09-24 05:00:35.666] data.WU_FadeInDelay=0 [2025-09-24 05:00:35.666] max_time_out=0 [2025-09-24 05:00:35.666] No splash screen [2025-09-24 05:00:35.666] stop dss Done [2025-09-24 05:00:35.711] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:00:35.711] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:00:35.749] /dev/mem opened. [2025-09-24 05:00:35.749] Memory mapped at address 0xffffaff4a000. [2025-09-24 05:00:35.749] Read at address 0x00600018 (0xffffaff4a018): 0x00000000 [2025-09-24 05:00:35.749] Write at address 0x00600018 (0xffffaff4a018): 0x00400040, readback 0x00400040 [2025-09-24 05:00:35.829] Loaded PowerVR consumer services. [2025-09-24 05:00:35.957] 512+0 records in [2025-09-24 05:00:35.957] 512+0 records out [2025-09-24 05:00:35.973] Waiting data available... [2025-09-24 05:00:35.989] Starting syslogd/klogd: done [2025-09-24 05:00:36.005] DML Start [2025-09-24 05:00:36.197] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:00:36.453] DML res1: 0 [2025-09-24 05:00:36.852] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:00:36.869] Read Success [2025-09-24 05:00:36.869] Verifying certificate... [2025-09-24 05:00:37.109] Verified OK [2025-09-24 05:00:37.124] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:00:38.724] Verified OK [2025-09-24 05:00:38.724] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:00:39.353] Verified OK [2025-09-24 05:00:39.353] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:00:42.039] fs.protected_hardlinks = 1 [2025-09-24 05:00:42.039] fs.protected_symlinks = 1 [2025-09-24 05:00:42.055] kernel.modules_disabled = 1 [2025-09-24 05:00:42.248] [2025-09-24 05:00:42.248] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:00:43.507] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:00:51.366] SBL1:1210.0.1.0 [2025-09-24 05:00:51.398] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:00:52.981] SBL2:1210.0.1.0 [2025-09-24 05:00:53.013] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:00:53.125] j-A [2025-09-24 05:01:00.463] The R5 Autosar Classic is running [2025-09-24 05:01:00.494] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:01:00.494] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:01:01.102] INIT: version 2.96 booting [2025-09-24 05:01:01.213] INIT: Entering runlevel: 5 [2025-09-24 05:01:01.357] mtd28 attached [2025-09-24 05:01:01.373] mtd32 attached [2025-09-24 05:01:01.389] mtd24 attached [2025-09-24 05:01:01.493] ubi0:animations is mounted. [2025-09-24 05:01:01.493] RTNETLINK answers: File exists [2025-09-24 05:01:01.493] ubi1:dml_code is mounted. [2025-09-24 05:01:01.493] ubi2:textures is mounted. [2025-09-24 05:01:01.493] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:01:01.493] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:01:01.493] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:01:01.493] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:01:01.493] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:01:01.493] data.LB_FadeInType0=100 [2025-09-24 05:01:01.493] data.CHLH_FadeInType0=0 [2025-09-24 05:01:01.493] data.WU_FadeInDelay=0 [2025-09-24 05:01:01.493] max_time_out=0 [2025-09-24 05:01:01.493] No splash screen [2025-09-24 05:01:01.493] stop dss Done [2025-09-24 05:01:01.541] /dev/mem opened. [2025-09-24 05:01:01.541] Memory mapped at address 0xffffb07c4000. [2025-09-24 05:01:01.566] Read at address 0x00600018 (0xffffb07c4018): 0x00000000 [2025-09-24 05:01:01.566] Write at address 0x00600018 (0xffffb07c4018): 0x00400040, readback 0x00400040 [2025-09-24 05:01:01.593] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:01:01.593] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:01:01.737] Loaded PowerVR consumer services. [2025-09-24 05:01:01.769] 512+0 records in [2025-09-24 05:01:01.769] 512+0 records out [2025-09-24 05:01:01.817] Starting syslogd/klogd: done [2025-09-24 05:01:01.881] Waiting data available... [2025-09-24 05:01:01.881] DML Start [2025-09-24 05:01:02.073] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:01:02.297] DML res1: 0 [2025-09-24 05:01:02.723] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:01:02.723] Read Success [2025-09-24 05:01:02.723] Verifying certificate... [2025-09-24 05:01:02.948] Verified OK [2025-09-24 05:01:02.964] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:01:04.657] Verified OK [2025-09-24 05:01:04.657] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:01:05.217] Verified OK [2025-09-24 05:01:05.217] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:01:08.000] fs.protected_hardlinks = 1 [2025-09-24 05:01:08.015] fs.protected_symlinks = 1 [2025-09-24 05:01:08.015] kernel.modules_disabled = 1 [2025-09-24 05:01:08.208] [2025-09-24 05:01:08.208] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:01:09.382] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:01:17.223] SBL1:1210.0.1.0 [2025-09-24 05:01:17.271] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:01:18.838] SBL2:1210.0.1.0 [2025-09-24 05:01:18.870] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:01:18.982] j-A [2025-09-24 05:01:26.354] The R5 Autosar Classic is running [2025-09-24 05:01:26.354] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:01:26.354] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:01:26.961] INIT: version 2.96 booting [2025-09-24 05:01:27.074] INIT: Entering runlevel: 5 [2025-09-24 05:01:27.233] mtd24 attached [2025-09-24 05:01:27.233] mtd28 attached [2025-09-24 05:01:27.249] mtd32 attached [2025-09-24 05:01:27.282] ubi0:textures is mounted. [2025-09-24 05:01:27.298] ubi1:animations is mounted. [2025-09-24 05:01:27.298] RTNETLINK answers: File exists [2025-09-24 05:01:27.340] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:01:27.340] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:01:27.340] ubi2:dml_code is mounted. [2025-09-24 05:01:27.340] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:01:27.340] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:01:27.340] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:01:27.340] data.LB_FadeInType0=100 [2025-09-24 05:01:27.360] data.CHLH_FadeInType0=0 [2025-09-24 05:01:27.360] data.WU_FadeInDelay=0 [2025-09-24 05:01:27.360] max_time_out=0 [2025-09-24 05:01:27.360] No splash screen [2025-09-24 05:01:27.360] stop dss Done [2025-09-24 05:01:27.427] /dev/mem opened. [2025-09-24 05:01:27.427] Memory mapped at address 0xffffb9210000. [2025-09-24 05:01:27.427] Read at address 0x00600018 (0xffffb9210018): 0x00000000 [2025-09-24 05:01:27.427] Write at address 0x00600018 (0xffffb9210018): 0x00400040, readback 0x00400040 [2025-09-24 05:01:27.427] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:01:27.443] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:01:27.571] Loaded PowerVR consumer services. [2025-09-24 05:01:27.692] Waiting data available... [2025-09-24 05:01:27.692] 512+0 records in [2025-09-24 05:01:27.692] 512+0 records out [2025-09-24 05:01:27.724] Starting syslogd/klogd: done [2025-09-24 05:01:27.756] DML Start [2025-09-24 05:01:27.948] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:01:28.156] DML res1: 0 [2025-09-24 05:01:28.613] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:01:28.613] Read Success [2025-09-24 05:01:28.613] Verifying certificate... [2025-09-24 05:01:28.838] Verified OK [2025-09-24 05:01:28.853] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:01:30.468] Verified OK [2025-09-24 05:01:30.468] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:01:31.119] Verified OK [2025-09-24 05:01:31.119] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:01:33.837] fs.protected_hardlinks = 1 [2025-09-24 05:01:33.837] fs.protected_symlinks = 1 [2025-09-24 05:01:33.853] kernel.modules_disabled = 1 [2025-09-24 05:01:34.045] [2025-09-24 05:01:34.045] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:01:35.273] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:01:43.053] SBL1:1210.0.1.0 [2025-09-24 05:01:43.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:01:44.667] SBL2:1210.0.1.0 [2025-09-24 05:01:44.699] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:01:44.811] j-A [2025-09-24 05:01:52.186] The R5 Autosar Classic is running [2025-09-24 05:01:52.186] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:01:52.186] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:01:52.793] INIT: version 2.96 booting [2025-09-24 05:01:52.905] INIT: Entering runlevel: 5 [2025-09-24 05:01:53.048] mtd24 attached [2025-09-24 05:01:53.064] mtd28 attached [2025-09-24 05:01:53.080] mtd32 attached [2025-09-24 05:01:53.129] RTNETLINK answers: File exists [2025-09-24 05:01:53.165] ubi0:textures is mounted. [2025-09-24 05:01:53.165] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:01:53.165] ubi1:animations is mounted. [2025-09-24 05:01:53.165] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:01:53.165] ubi2:dml_code is mounted. [2025-09-24 05:01:53.165] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:01:53.165] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:01:53.165] data.LB_FadeInType0=100 [2025-09-24 05:01:53.191] data.CHLH_FadeInType0=0 [2025-09-24 05:01:53.191] data.WU_FadeInDelay=0 [2025-09-24 05:01:53.191] max_time_out=0 [2025-09-24 05:01:53.191] No splash screen [2025-09-24 05:01:53.191] stop dss Done [2025-09-24 05:01:53.191] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:01:53.238] /dev/mem opened. [2025-09-24 05:01:53.238] Memory mapped at address 0xffffa5584000. [2025-09-24 05:01:53.271] Read at address 0x00600018 (0xffffa5584018): 0x00000000 [2025-09-24 05:01:53.271] Write at address 0x00600018 (0xffffa5584018): 0x00400040, readback 0x00400040 [2025-09-24 05:01:53.271] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:01:53.271] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:01:53.447] Loaded PowerVR consumer services. [2025-09-24 05:01:53.480] 512+0 records in [2025-09-24 05:01:53.480] 512+0 records out [2025-09-24 05:01:53.496] Waiting data available... [2025-09-24 05:01:53.527] Starting syslogd/klogd: done [2025-09-24 05:01:53.543] DML Start [2025-09-24 05:01:53.735] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:01:53.927] DML res1: 0 [2025-09-24 05:01:54.422] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:01:54.438] Read Success [2025-09-24 05:01:54.438] Verifying certificate... [2025-09-24 05:01:54.694] Verified OK [2025-09-24 05:01:54.710] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:01:56.411] Verified OK [2025-09-24 05:01:56.411] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:01:57.035] Verified OK [2025-09-24 05:01:57.035] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:01:59.688] fs.protected_hardlinks = 1 [2025-09-24 05:01:59.704] fs.protected_symlinks = 1 [2025-09-24 05:01:59.704] kernel.modules_disabled = 1 [2025-09-24 05:01:59.896] [2025-09-24 05:01:59.896] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:02:01.076] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:02:08.887] SBL1:1210.0.1.0 [2025-09-24 05:02:08.935] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:02:10.501] SBL2:1210.0.1.0 [2025-09-24 05:02:10.533] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:02:10.645] j-A [2025-09-24 05:02:18.019] The R5 Autosar Classic is running [2025-09-24 05:02:18.019] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:02:18.019] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:02:18.627] INIT: version 2.96 booting [2025-09-24 05:02:18.739] INIT: Entering runlevel: 5 [2025-09-24 05:02:18.899] mtd24 attached [2025-09-24 05:02:18.899] mtd28 attached [2025-09-24 05:02:18.931] mtd32 attached [2025-09-24 05:02:18.947] ubi0:textures is mounted. [2025-09-24 05:02:18.963] ubi1:animations is mounted. [2025-09-24 05:02:18.979] RTNETLINK answers: File exists [2025-09-24 05:02:18.979] ubi2:dml_code is mounted. [2025-09-24 05:02:18.979] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:02:19.041] data.LB_FadeInType0=100 [2025-09-24 05:02:19.041] data.CHLH_FadeInType0=0 [2025-09-24 05:02:19.041] data.WU_FadeInDelay=0 [2025-09-24 05:02:19.041] max_time_out=0 [2025-09-24 05:02:19.041] No splash screen [2025-09-24 05:02:19.041] stop dss Done [2025-09-24 05:02:19.041] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:02:19.041] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:02:19.041] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:02:19.041] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:02:19.098] /dev/mem opened. [2025-09-24 05:02:19.098] Memory mapped at address 0xffff931f7000. [2025-09-24 05:02:19.098] Read at address 0x00600018 (0xffff931f7018): 0x00000000 [2025-09-24 05:02:19.098] Write at address 0x00600018 (0xffff931f7018): 0x00400040, readback 0x00400040 [2025-09-24 05:02:19.114] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:02:19.140] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:02:19.220] Loaded PowerVR consumer services. [2025-09-24 05:02:19.300] 512+0 records in [2025-09-24 05:02:19.300] 512+0 records out [2025-09-24 05:02:19.364] Starting syslogd/klogd: done [2025-09-24 05:02:19.381] Waiting data available... [2025-09-24 05:02:19.381] DML Start [2025-09-24 05:02:19.556] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:02:19.827] DML res1: 0 [2025-09-24 05:02:20.227] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:02:20.243] Read Success [2025-09-24 05:02:20.243] Verifying certificate... [2025-09-24 05:02:20.532] Verified OK [2025-09-24 05:02:20.547] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:02:22.226] Verified OK [2025-09-24 05:02:22.226] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:02:22.813] Verified OK [2025-09-24 05:02:22.813] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:02:25.499] fs.protected_hardlinks = 1 [2025-09-24 05:02:25.499] fs.protected_symlinks = 1 [2025-09-24 05:02:25.515] kernel.modules_disabled = 1 [2025-09-24 05:02:25.707] [2025-09-24 05:02:25.707] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:02:26.887] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:02:34.716] SBL1:1210.0.1.0 [2025-09-24 05:02:34.764] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:02:36.330] SBL2:1210.0.1.0 [2025-09-24 05:02:36.362] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:02:36.475] j-A [2025-09-24 05:02:43.848] The R5 Autosar Classic is running [2025-09-24 05:02:43.848] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:02:43.848] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:02:44.455] INIT: version 2.96 booting [2025-09-24 05:02:44.567] INIT: Entering runlevel: 5 [2025-09-24 05:02:44.727] mtd28 attached [2025-09-24 05:02:44.727] mtd32 attached [2025-09-24 05:02:44.743] mtd24 attached [2025-09-24 05:02:44.791] RTNETLINK answers: File exists [2025-09-24 05:02:44.840] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:02:44.840] ubi1:dml_code is mounted. [2025-09-24 05:02:44.840] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:02:44.840] ubi0:animations is mounted. [2025-09-24 05:02:44.840] ubi2:textures is mounted. [2025-09-24 05:02:44.840] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:02:44.840] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:02:44.840] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:02:44.861] data.LB_FadeInType0=100 [2025-09-24 05:02:44.861] data.CHLH_FadeInType0=0 [2025-09-24 05:02:44.861] data.WU_FadeInDelay=0 [2025-09-24 05:02:44.861] max_time_out=0 [2025-09-24 05:02:44.861] No splash screen [2025-09-24 05:02:44.861] stop dss Done [2025-09-24 05:02:44.909] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:02:44.948] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:02:44.948] /dev/mem opened. [2025-09-24 05:02:44.948] Memory mapped at address 0xffffb97c9000. [2025-09-24 05:02:44.948] Read at address 0x00600018 (0xffffb97c9018): 0x00000000 [2025-09-24 05:02:44.948] Write at address 0x00600018 (0xffffb97c9018): 0x00400040, readback 0x00400040 [2025-09-24 05:02:45.092] Loaded PowerVR consumer services. [2025-09-24 05:02:45.124] 512+0 records in [2025-09-24 05:02:45.124] 512+0 records out [2025-09-24 05:02:45.172] Waiting data available... [2025-09-24 05:02:45.188] Starting syslogd/klogd: done [2025-09-24 05:02:45.204] DML Start [2025-09-24 05:02:45.380] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:02:45.587] DML res1: 0 [2025-09-24 05:02:46.121] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:02:46.121] Read Success [2025-09-24 05:02:46.121] Verifying certificate... [2025-09-24 05:02:46.361] Verified OK [2025-09-24 05:02:46.377] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:02:48.071] Verified OK [2025-09-24 05:02:48.071] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:02:48.710] Verified OK [2025-09-24 05:02:48.726] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:02:51.317] fs.protected_hardlinks = 1 [2025-09-24 05:02:51.317] fs.protected_symlinks = 1 [2025-09-24 05:02:51.332] kernel.modules_disabled = 1 [2025-09-24 05:02:51.525] [2025-09-24 05:02:51.525] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:02:52.697] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:03:00.570] SBL1:1210.0.1.0 [2025-09-24 05:03:00.618] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:03:02.184] SBL2:1210.0.1.0 [2025-09-24 05:03:02.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:03:02.329] j-A [2025-09-24 05:03:09.702] The R5 Autosar Classic is running [2025-09-24 05:03:09.702] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:03:09.702] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:03:10.309] INIT: version 2.96 booting [2025-09-24 05:03:10.421] INIT: Entering runlevel: 5 [2025-09-24 05:03:10.565] mtd28 attached [2025-09-24 05:03:10.581] mtd32 attached [2025-09-24 05:03:10.581] mtd24 attached [2025-09-24 05:03:10.629] RTNETLINK answers: File exists [2025-09-24 05:03:10.703] ubi0:animations is mounted. [2025-09-24 05:03:10.703] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:03:10.703] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:03:10.703] ubi2:textures is mounted. [2025-09-24 05:03:10.703] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:03:10.703] ubi1:dml_code is mounted. [2025-09-24 05:03:10.703] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:03:10.703] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:03:10.703] data.LB_FadeInType0=100 [2025-09-24 05:03:10.703] data.CHLH_FadeInType0=0 [2025-09-24 05:03:10.703] data.WU_FadeInDelay=0 [2025-09-24 05:03:10.703] max_time_out=0 [2025-09-24 05:03:10.703] No splash screen [2025-09-24 05:03:10.703] stop dss Done [2025-09-24 05:03:10.779] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:03:10.779] /dev/mem opened. [2025-09-24 05:03:10.779] Memory mapped at address 0xffff9da0a000. [2025-09-24 05:03:10.779] Read at address 0x00600018 (0xffff9da0a018): 0x00000000 [2025-09-24 05:03:10.779] Write at address 0x00600018 (0xffff9da0a018): 0x00400040, readback 0x00400040 [2025-09-24 05:03:10.779] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:03:10.891] Loaded PowerVR consumer services. [2025-09-24 05:03:10.987] 512+0 records in [2025-09-24 05:03:10.987] 512+0 records out [2025-09-24 05:03:11.003] Waiting data available... [2025-09-24 05:03:11.019] Starting syslogd/klogd: done [2025-09-24 05:03:11.035] DML Start [2025-09-24 05:03:11.226] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:03:11.450] DML res1: 0 [2025-09-24 05:03:11.941] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:03:11.941] Read Success [2025-09-24 05:03:11.941] Verifying certificate... [2025-09-24 05:03:12.213] Verified OK [2025-09-24 05:03:12.229] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:03:13.890] Verified OK [2025-09-24 05:03:13.890] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:03:14.490] Verified OK [2025-09-24 05:03:14.490] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:03:17.176] fs.protected_hardlinks = 1 [2025-09-24 05:03:17.176] fs.protected_symlinks = 1 [2025-09-24 05:03:17.192] kernel.modules_disabled = 1 [2025-09-24 05:03:17.399] [2025-09-24 05:03:17.399] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:03:18.546] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:03:26.407] SBL1:1210.0.1.0 [2025-09-24 05:03:26.439] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:03:28.006] SBL2:1210.0.1.0 [2025-09-24 05:03:28.054] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:03:28.150] j-A [2025-09-24 05:03:35.506] The R5 Autosar Classic is running [2025-09-24 05:03:35.506] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:03:35.527] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:03:36.135] INIT: version 2.96 booting [2025-09-24 05:03:36.246] INIT: Entering runlevel: 5 [2025-09-24 05:03:36.391] mtd24 attached [2025-09-24 05:03:36.407] mtd28 attached [2025-09-24 05:03:36.423] mtd32 attached [2025-09-24 05:03:36.455] ubi0:textures is mounted. [2025-09-24 05:03:36.471] RTNETLINK answers: File exists [2025-09-24 05:03:36.525] ubi1:animations is mounted. [2025-09-24 05:03:36.525] ubi2:dml_code is mounted. [2025-09-24 05:03:36.525] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:03:36.525] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:03:36.525] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:03:36.525] data.LB_FadeInType0=100 [2025-09-24 05:03:36.525] data.CHLH_FadeInType0=0 [2025-09-24 05:03:36.525] data.WU_FadeInDelay=0 [2025-09-24 05:03:36.525] max_time_out=0 [2025-09-24 05:03:36.525] No splash screen [2025-09-24 05:03:36.525] stop dss Done [2025-09-24 05:03:36.525] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:03:36.525] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:03:36.618] /dev/mem opened. [2025-09-24 05:03:36.618] Memory mapped at address 0xffff93450000. [2025-09-24 05:03:36.618] Read at address 0x00600018 (0xffff93450018): 0x00000000 [2025-09-24 05:03:36.618] Write at address 0x00600018 (0xffff93450018): 0x00400040, readback 0x00400040 [2025-09-24 05:03:36.618] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:03:36.618] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:03:36.778] Loaded PowerVR consumer services. [2025-09-24 05:03:36.810] 512+0 records in [2025-09-24 05:03:36.810] 512+0 records out [2025-09-24 05:03:36.842] Waiting data available... [2025-09-24 05:03:36.858] Starting syslogd/klogd: done [2025-09-24 05:03:36.890] DML Start [2025-09-24 05:03:37.050] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:03:37.258] DML res1: 0 [2025-09-24 05:03:37.770] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:03:37.785] Read Success [2025-09-24 05:03:37.785] Verifying certificate... [2025-09-24 05:03:38.025] Verified OK [2025-09-24 05:03:38.041] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:03:39.571] Verified OK [2025-09-24 05:03:39.571] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:03:40.226] Verified OK [2025-09-24 05:03:40.226] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:03:42.989] fs.protected_hardlinks = 1 [2025-09-24 05:03:42.989] fs.protected_symlinks = 1 [2025-09-24 05:03:42.989] kernel.modules_disabled = 1 [2025-09-24 05:03:43.181] [2025-09-24 05:03:43.181] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:03:44.399] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:03:52.208] SBL1:1210.0.1.0 [2025-09-24 05:03:52.256] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:03:53.822] SBL2:1210.0.1.0 [2025-09-24 05:03:53.870] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:03:53.966] j-A [2025-09-24 05:04:01.323] The R5 Autosar Classic is running [2025-09-24 05:04:01.323] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:04:01.343] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:04:01.952] INIT: version 2.96 booting [2025-09-24 05:04:02.063] INIT: Entering runlevel: 5 [2025-09-24 05:04:02.207] mtd28 attached [2025-09-24 05:04:02.223] mtd24 attached [2025-09-24 05:04:02.239] mtd32 attached [2025-09-24 05:04:02.323] RTNETLINK answers: File exists [2025-09-24 05:04:02.323] ubi0:animations is mounted. [2025-09-24 05:04:02.323] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:04:02.323] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:04:02.323] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:04:02.323] ubi2:dml_code is mounted. [2025-09-24 05:04:02.323] ubi1:textures is mounted. [2025-09-24 05:04:02.323] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:04:02.323] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:04:02.349] data.LB_FadeInType0=100 [2025-09-24 05:04:02.349] data.CHLH_FadeInType0=0 [2025-09-24 05:04:02.349] data.WU_FadeInDelay=0 [2025-09-24 05:04:02.349] max_time_out=0 [2025-09-24 05:04:02.349] No splash screen [2025-09-24 05:04:02.349] stop dss Done [2025-09-24 05:04:02.429] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:04:02.429] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:04:02.429] /dev/mem opened. [2025-09-24 05:04:02.429] Memory mapped at address 0xffffbb87d000. [2025-09-24 05:04:02.429] Read at address 0x00600018 (0xffffbb87d018): 0x00000000 [2025-09-24 05:04:02.429] Write at address 0x00600018 (0xffffbb87d018): 0x00400040, readback 0x00400040 [2025-09-24 05:04:02.525] Loaded PowerVR consumer services. [2025-09-24 05:04:02.637] 512+0 records in [2025-09-24 05:04:02.637] 512+0 records out [2025-09-24 05:04:02.653] Waiting data available... [2025-09-24 05:04:02.669] Starting syslogd/klogd: done [2025-09-24 05:04:02.685] DML Start [2025-09-24 05:04:02.876] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:04:03.069] DML res1: 0 [2025-09-24 05:04:03.528] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:04:03.528] Read Success [2025-09-24 05:04:03.528] Verifying certificate... [2025-09-24 05:04:03.752] Verified OK [2025-09-24 05:04:03.768] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:04:05.351] Verified OK [2025-09-24 05:04:05.367] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:04:05.991] Verified OK [2025-09-24 05:04:05.991] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:04:08.644] fs.protected_hardlinks = 1 [2025-09-24 05:04:08.660] fs.protected_symlinks = 1 [2025-09-24 05:04:08.660] kernel.modules_disabled = 1 [2025-09-24 05:04:08.853] [2025-09-24 05:04:08.853] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:04:10.200] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:04:18.061] SBL1:1210.0.1.0 [2025-09-24 05:04:18.093] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:04:19.676] SBL2:1210.0.1.0 [2025-09-24 05:04:19.708] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:04:19.804] j-A [2025-09-24 05:04:27.158] The R5 Autosar Classic is running [2025-09-24 05:04:27.184] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:04:27.184] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:04:27.791] INIT: version 2.96 booting [2025-09-24 05:04:27.904] INIT: Entering runlevel: 5 [2025-09-24 05:04:28.064] mtd28 attached [2025-09-24 05:04:28.079] mtd24 attached [2025-09-24 05:04:28.095] mtd32 attached [2025-09-24 05:04:28.203] RTNETLINK answers: File exists [2025-09-24 05:04:28.203] ubi2:dml_code is mounted. [2025-09-24 05:04:28.203] ubi1:textures is mounted. [2025-09-24 05:04:28.203] ubi0:animations is mounted. [2025-09-24 05:04:28.203] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:04:28.203] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:04:28.203] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:04:28.203] data.LB_FadeInType0=100 [2025-09-24 05:04:28.203] data.CHLH_FadeInType0=0 [2025-09-24 05:04:28.203] data.WU_FadeInDelay=0 [2025-09-24 05:04:28.203] max_time_out=0 [2025-09-24 05:04:28.203] No splash screen [2025-09-24 05:04:28.203] stop dss Done [2025-09-24 05:04:28.203] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:04:28.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:04:28.252] /dev/mem opened. [2025-09-24 05:04:28.252] Memory mapped at address 0xffffb299b000. [2025-09-24 05:04:28.278] Read at address 0x00600018 (0xffffb299b018): 0x00000000 [2025-09-24 05:04:28.278] Write at address 0x00600018 (0xffffb299b018): 0x00400040, readback 0x00400040 [2025-09-24 05:04:28.294] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:04:28.310] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:04:28.405] Loaded PowerVR consumer services. [2025-09-24 05:04:28.501] 512+0 records in [2025-09-24 05:04:28.501] 512+0 records out [2025-09-24 05:04:28.517] Waiting data available... [2025-09-24 05:04:28.549] Starting syslogd/klogd: done [2025-09-24 05:04:28.566] DML Start [2025-09-24 05:04:28.725] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:04:28.965] DML res1: 0 [2025-09-24 05:04:29.444] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:04:29.465] Read Success [2025-09-24 05:04:29.465] Verifying certificate... [2025-09-24 05:04:29.721] Verified OK [2025-09-24 05:04:29.753] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:04:31.512] Verified OK [2025-09-24 05:04:31.512] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:04:32.111] Verified OK [2025-09-24 05:04:32.111] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:04:34.574] fs.protected_hardlinks = 1 [2025-09-24 05:04:34.574] fs.protected_symlinks = 1 [2025-09-24 05:04:34.590] kernel.modules_disabled = 1 [2025-09-24 05:04:34.781] [2025-09-24 05:04:34.781] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:04:36.055] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:04:43.903] SBL1:1210.0.1.0 [2025-09-24 05:04:43.935] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:04:45.518] SBL2:1210.0.1.0 [2025-09-24 05:04:45.550] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:04:45.645] j-A [2025-09-24 05:04:53.000] The R5 Autosar Classic is running [2025-09-24 05:04:53.025] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:04:53.025] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:04:53.633] INIT: version 2.96 booting [2025-09-24 05:04:53.744] INIT: Entering runlevel: 5 [2025-09-24 05:04:53.889] mtd24 attached [2025-09-24 05:04:53.905] mtd28 attached [2025-09-24 05:04:53.921] mtd32 attached [2025-09-24 05:04:54.030] RTNETLINK answers: File exists [2025-09-24 05:04:54.030] ubi0:textures is mounted. [2025-09-24 05:04:54.030] ubi1:animations is mounted. [2025-09-24 05:04:54.030] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:04:54.030] ubi2:dml_code is mounted. [2025-09-24 05:04:54.030] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:04:54.030] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:04:54.030] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:04:54.030] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:04:54.030] data.LB_FadeInType0=100 [2025-09-24 05:04:54.030] data.CHLH_FadeInType0=0 [2025-09-24 05:04:54.030] data.WU_FadeInDelay=0 [2025-09-24 05:04:54.030] max_time_out=0 [2025-09-24 05:04:54.030] No splash screen [2025-09-24 05:04:54.030] stop dss Done [2025-09-24 05:04:54.078] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:04:54.078] /dev/mem opened. [2025-09-24 05:04:54.078] Memory mapped at address 0xffffa670b000. [2025-09-24 05:04:54.110] Read at address 0x00600018 (0xffffa670b018): 0x00000000 [2025-09-24 05:04:54.110] Write at address 0x00600018 (0xffffa670b018): 0x00400040, readback 0x00400040 [2025-09-24 05:04:54.110] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:04:54.206] Loaded PowerVR consumer services. [2025-09-24 05:04:54.318] 512+0 records in [2025-09-24 05:04:54.318] 512+0 records out [2025-09-24 05:04:54.335] Waiting data available... [2025-09-24 05:04:54.350] Starting syslogd/klogd: done [2025-09-24 05:04:54.366] DML Start [2025-09-24 05:04:54.542] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:04:54.766] DML res1: 0 [2025-09-24 05:04:55.230] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:04:55.246] Read Success [2025-09-24 05:04:55.246] Verifying certificate... [2025-09-24 05:04:55.517] Verified OK [2025-09-24 05:04:55.533] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:04:57.260] Verified OK [2025-09-24 05:04:57.260] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:04:57.853] Verified OK [2025-09-24 05:04:57.853] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:05:00.475] fs.protected_hardlinks = 1 [2025-09-24 05:05:00.475] fs.protected_symlinks = 1 [2025-09-24 05:05:00.491] kernel.modules_disabled = 1 [2025-09-24 05:05:00.683] [2025-09-24 05:05:00.683] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:05:01.866] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:05:09.739] SBL1:1210.0.1.0 [2025-09-24 05:05:09.786] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:05:11.354] SBL2:1210.0.1.0 [2025-09-24 05:05:11.386] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:05:11.497] j-A [2025-09-24 05:05:18.871] The R5 Autosar Classic is running [2025-09-24 05:05:18.871] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:05:18.871] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:05:19.478] INIT: version 2.96 booting [2025-09-24 05:05:19.590] INIT: Entering runlevel: 5 [2025-09-24 05:05:19.751] mtd32 attached [2025-09-24 05:05:19.751] mtd24 attached [2025-09-24 05:05:19.766] mtd28 attached [2025-09-24 05:05:19.814] RTNETLINK answers: File exists [2025-09-24 05:05:19.814] ubi0:dml_code is mounted. [2025-09-24 05:05:19.883] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:05:19.883] ubi1:textures is mounted. [2025-09-24 05:05:19.883] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:05:19.883] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:05:19.883] ubi2:animations is mounted. [2025-09-24 05:05:19.883] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:05:19.883] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:05:19.883] data.LB_FadeInType0=100 [2025-09-24 05:05:19.883] data.CHLH_FadeInType0=0 [2025-09-24 05:05:19.883] data.WU_FadeInDelay=0 [2025-09-24 05:05:19.883] max_time_out=0 [2025-09-24 05:05:19.883] No splash screen [2025-09-24 05:05:19.883] stop dss Done [2025-09-24 05:05:19.899] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:05:19.899] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:05:19.969] /dev/mem opened. [2025-09-24 05:05:19.969] Memory mapped at address 0xffff9ea1e000. [2025-09-24 05:05:19.969] Read at address 0x00600018 (0xffff9ea1e018): 0x00000000 [2025-09-24 05:05:19.969] Write at address 0x00600018 (0xffff9ea1e018): 0x00400040, readback 0x00400040 [2025-09-24 05:05:20.050] Loaded PowerVR consumer services. [2025-09-24 05:05:20.161] 512+0 records in [2025-09-24 05:05:20.177] 512+0 records out [2025-09-24 05:05:20.193] Waiting data available... [2025-09-24 05:05:20.193] Starting syslogd/klogd: done [2025-09-24 05:05:20.224] DML Start [2025-09-24 05:05:20.401] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:05:20.641] DML res1: 0 [2025-09-24 05:05:21.077] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:05:21.077] Read Success [2025-09-24 05:05:21.077] Verifying certificate... [2025-09-24 05:05:21.301] Verified OK [2025-09-24 05:05:21.317] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:05:22.981] Verified OK [2025-09-24 05:05:22.981] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:05:23.646] Verified OK [2025-09-24 05:05:23.646] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:05:26.365] fs.protected_hardlinks = 1 [2025-09-24 05:05:26.381] fs.protected_symlinks = 1 [2025-09-24 05:05:26.381] kernel.modules_disabled = 1 [2025-09-24 05:05:26.572] [2025-09-24 05:05:26.572] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:05:27.748] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:05:35.595] SBL1:1210.0.1.0 [2025-09-24 05:05:35.643] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:05:37.209] SBL2:1210.0.1.0 [2025-09-24 05:05:37.241] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:05:37.353] j-A [2025-09-24 05:05:44.707] The R5 Autosar Classic is running [2025-09-24 05:05:44.707] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:05:44.728] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:05:45.335] INIT: version 2.96 booting [2025-09-24 05:05:45.448] INIT: Entering runlevel: 5 [2025-09-24 05:05:45.607] mtd32 attached [2025-09-24 05:05:45.623] mtd24 attached [2025-09-24 05:05:45.623] mtd28 attached [2025-09-24 05:05:45.672] ubi0:dml_code is mounted. [2025-09-24 05:05:45.746] RTNETLINK answers: File exists [2025-09-24 05:05:45.746] ubi1:textures is mounted. [2025-09-24 05:05:45.746] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:05:45.746] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:05:45.746] ubi2:animations is mounted. [2025-09-24 05:05:45.746] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:05:45.746] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:05:45.746] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:05:45.746] data.LB_FadeInType0=100 [2025-09-24 05:05:45.746] data.CHLH_FadeInType0=0 [2025-09-24 05:05:45.746] data.WU_FadeInDelay=0 [2025-09-24 05:05:45.746] max_time_out=0 [2025-09-24 05:05:45.746] No splash screen [2025-09-24 05:05:45.746] stop dss Done [2025-09-24 05:05:45.778] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:05:45.793] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:05:45.825] /dev/mem opened. [2025-09-24 05:05:45.825] Memory mapped at address 0xffffa2f18000. [2025-09-24 05:05:45.825] Read at address 0x00600018 (0xffffa2f18018): 0x00000000 [2025-09-24 05:05:45.825] Write at address 0x00600018 (0xffffa2f18018): 0x00400040, readback 0x00400040 [2025-09-24 05:05:45.905] Loaded PowerVR consumer services. [2025-09-24 05:05:46.017] 512+0 records in [2025-09-24 05:05:46.017] 512+0 records out [2025-09-24 05:05:46.049] Waiting data available... [2025-09-24 05:05:46.065] Starting syslogd/klogd: done [2025-09-24 05:05:46.081] DML Start [2025-09-24 05:05:46.289] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:05:46.512] DML res1: 0 [2025-09-24 05:05:46.941] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:05:46.941] Read Success [2025-09-24 05:05:46.941] Verifying certificate... [2025-09-24 05:05:47.164] Verified OK [2025-09-24 05:05:47.180] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:05:48.891] Verified OK [2025-09-24 05:05:48.891] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:05:49.575] Verified OK [2025-09-24 05:05:49.575] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:05:52.243] fs.protected_hardlinks = 1 [2025-09-24 05:05:52.243] fs.protected_symlinks = 1 [2025-09-24 05:05:52.243] kernel.modules_disabled = 1 [2025-09-24 05:05:52.419] [2025-09-24 05:05:52.419] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:05:53.598] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:06:01.473] SBL1:1210.0.1.0 [2025-09-24 05:06:01.521] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:06:03.089] SBL2:1210.0.1.0 [2025-09-24 05:06:03.120] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:06:03.232] j-A [2025-09-24 05:06:10.607] The R5 Autosar Classic is running [2025-09-24 05:06:10.607] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:06:10.607] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:06:11.213] INIT: version 2.96 booting [2025-09-24 05:06:11.326] INIT: Entering runlevel: 5 [2025-09-24 05:06:11.486] mtd32 attached [2025-09-24 05:06:11.486] mtd24 attached [2025-09-24 05:06:11.501] mtd28 attached [2025-09-24 05:06:11.549] ubi0:dml_code is mounted. [2025-09-24 05:06:11.549] RTNETLINK answers: File exists [2025-09-24 05:06:11.578] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:06:11.578] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:06:11.578] ubi2:animations is mounted. [2025-09-24 05:06:11.578] ubi1:textures is mounted. [2025-09-24 05:06:11.578] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:06:11.578] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:06:11.612] data.LB_FadeInType0=100 [2025-09-24 05:06:11.612] data.CHLH_FadeInType0=0 [2025-09-24 05:06:11.612] data.WU_FadeInDelay=0 [2025-09-24 05:06:11.612] max_time_out=0 [2025-09-24 05:06:11.612] No splash screen [2025-09-24 05:06:11.612] stop dss Done [2025-09-24 05:06:11.612] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:06:11.660] /dev/mem opened. [2025-09-24 05:06:11.701] Memory mapped at address 0xffffb2b3c000. [2025-09-24 05:06:11.701] Read at address 0x00600018 (0xffffb2b3c018): 0x00000000 [2025-09-24 05:06:11.701] Write at address 0x00600018 (0xffffb2b3c018): 0x00400040, readback 0x00400040 [2025-09-24 05:06:11.701] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:06:11.701] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:06:11.780] Loaded PowerVR consumer services. [2025-09-24 05:06:11.924] 512+0 records in [2025-09-24 05:06:11.924] 512+0 records out [2025-09-24 05:06:11.924] Waiting data available... [2025-09-24 05:06:11.956] Starting syslogd/klogd: done [2025-09-24 05:06:11.988] DML Start [2025-09-24 05:06:12.163] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:06:12.403] DML res1: 0 [2025-09-24 05:06:12.812] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:06:12.812] Read Success [2025-09-24 05:06:12.812] Verifying certificate... [2025-09-24 05:06:13.068] Verified OK [2025-09-24 05:06:13.084] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:06:14.805] Verified OK [2025-09-24 05:06:14.805] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:06:15.332] Verified OK [2025-09-24 05:06:15.353] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:06:17.895] fs.protected_hardlinks = 1 [2025-09-24 05:06:17.911] fs.protected_symlinks = 1 [2025-09-24 05:06:17.911] kernel.modules_disabled = 1 [2025-09-24 05:06:18.103] [2025-09-24 05:06:18.103] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:06:19.490] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:06:27.335] SBL1:1210.0.1.0 [2025-09-24 05:06:27.367] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:06:28.949] SBL2:1210.0.1.0 [2025-09-24 05:06:28.981] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:06:29.093] j-A [2025-09-24 05:06:36.431] The R5 Autosar Classic is running [2025-09-24 05:06:36.462] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:06:36.462] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:06:37.069] INIT: version 2.96 booting [2025-09-24 05:06:37.181] INIT: Entering runlevel: 5 [2025-09-24 05:06:37.325] mtd24 attached [2025-09-24 05:06:37.341] mtd32 attached [2025-09-24 05:06:37.357] mtd28 attached [2025-09-24 05:06:37.405] RTNETLINK answers: File exists [2025-09-24 05:06:37.405] ubi1:dml_code is mounted. [2025-09-24 05:06:37.446] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:06:37.446] ubi0:textures is mounted. [2025-09-24 05:06:37.446] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:06:37.446] ubi2:animations is mounted. [2025-09-24 05:06:37.446] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:06:37.446] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:06:37.446] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:06:37.446] data.LB_FadeInType0=100 [2025-09-24 05:06:37.467] data.CHLH_FadeInType0=0 [2025-09-24 05:06:37.467] data.WU_FadeInDelay=0 [2025-09-24 05:06:37.467] max_time_out=0 [2025-09-24 05:06:37.467] No splash screen [2025-09-24 05:06:37.467] stop dss Done [2025-09-24 05:06:37.483] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:06:37.512] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:06:37.547] /dev/mem opened. [2025-09-24 05:06:37.547] Memory mapped at address 0xffffb418d000. [2025-09-24 05:06:37.547] Read at address 0x00600018 (0xffffb418d018): 0x00000000 [2025-09-24 05:06:37.547] Write at address 0x00600018 (0xffffb418d018): 0x00400040, readback 0x00400040 [2025-09-24 05:06:37.675] Loaded PowerVR consumer services. [2025-09-24 05:06:37.755] 512+0 records in [2025-09-24 05:06:37.755] 512+0 records out [2025-09-24 05:06:37.803] Starting syslogd/klogd: Waiting data available... [2025-09-24 05:06:37.819] done [2025-09-24 05:06:37.819] DML Start [2025-09-24 05:06:37.994] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:06:38.234] DML res1: 0 [2025-09-24 05:06:38.673] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:06:38.673] Read Success [2025-09-24 05:06:38.673] Verifying certificate... [2025-09-24 05:06:38.913] Verified OK [2025-09-24 05:06:38.929] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:06:40.680] Verified OK [2025-09-24 05:06:40.680] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:06:41.208] Verified OK [2025-09-24 05:06:41.208] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:06:43.813] fs.protected_hardlinks = 1 [2025-09-24 05:06:43.813] fs.protected_symlinks = 1 [2025-09-24 05:06:43.829] kernel.modules_disabled = 1 [2025-09-24 05:06:44.022] [2025-09-24 05:06:44.022] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:06:45.338] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:06:53.152] SBL1:1210.0.1.0 [2025-09-24 05:06:53.200] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:06:54.783] SBL2:1210.0.1.0 [2025-09-24 05:06:54.815] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:06:54.911] j-A [2025-09-24 05:07:02.266] The R5 Autosar Classic is running [2025-09-24 05:07:02.289] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:07:02.289] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:07:02.897] INIT: version 2.96 booting [2025-09-24 05:07:03.008] INIT: Entering runlevel: 5 [2025-09-24 05:07:03.153] mtd28 attached [2025-09-24 05:07:03.169] mtd24 attached [2025-09-24 05:07:03.184] mtd32 attached [2025-09-24 05:07:03.200] ubi0:animations is mounted. [2025-09-24 05:07:03.232] RTNETLINK answers: File exists [2025-09-24 05:07:03.232] ubi2:dml_code is mounted. [2025-09-24 05:07:03.289] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:07:03.289] ubi1:textures is mounted. [2025-09-24 05:07:03.289] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:07:03.289] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:07:03.289] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:07:03.289] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:07:03.289] data.LB_FadeInType0=100 [2025-09-24 05:07:03.289] data.CHLH_FadeInType0=0 [2025-09-24 05:07:03.289] data.WU_FadeInDelay=0 [2025-09-24 05:07:03.289] max_time_out=0 [2025-09-24 05:07:03.289] No splash screen [2025-09-24 05:07:03.289] stop dss Done [2025-09-24 05:07:03.321] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:07:03.358] /dev/mem opened. [2025-09-24 05:07:03.358] Memory mapped at address 0xffffbf32c000. [2025-09-24 05:07:03.358] Read at address 0x00600018 (0xffffbf32c018): 0x00000000 [2025-09-24 05:07:03.358] Write at address 0x00600018 (0xffffbf32c018): 0x00400040, readback 0x00400040 [2025-09-24 05:07:03.358] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:07:03.534] Loaded PowerVR consumer services. [2025-09-24 05:07:03.582] 512+0 records in [2025-09-24 05:07:03.582] 512+0 records out [2025-09-24 05:07:03.614] Starting syslogd/klogd: done [2025-09-24 05:07:03.662] Waiting data available... [2025-09-24 05:07:03.662] DML Start [2025-09-24 05:07:03.838] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:07:04.061] DML res1: 0 [2025-09-24 05:07:04.507] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:07:04.507] Read Success [2025-09-24 05:07:04.507] Verifying certificate... [2025-09-24 05:07:04.747] Verified OK [2025-09-24 05:07:04.763] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:07:06.506] Verified OK [2025-09-24 05:07:06.506] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:07:07.161] Verified OK [2025-09-24 05:07:07.161] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:07:09.734] fs.protected_hardlinks = 1 [2025-09-24 05:07:09.734] fs.protected_symlinks = 1 [2025-09-24 05:07:09.750] kernel.modules_disabled = 1 [2025-09-24 05:07:09.943] [2025-09-24 05:07:09.943] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:07:11.149] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:07:19.008] SBL1:1210.0.1.0 [2025-09-24 05:07:19.056] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:07:20.622] SBL2:1210.0.1.0 [2025-09-24 05:07:20.654] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:07:20.767] j-A [2025-09-24 05:07:28.139] The R5 Autosar Classic is running [2025-09-24 05:07:28.139] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:07:28.139] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:07:28.746] INIT: version 2.96 booting [2025-09-24 05:07:28.858] INIT: Entering runlevel: 5 [2025-09-24 05:07:29.001] mtd24 attached [2025-09-24 05:07:29.017] mtd28 attached [2025-09-24 05:07:29.033] mtd32 attached [2025-09-24 05:07:29.082] ubi0:textures is mounted. [2025-09-24 05:07:29.082] ubi1:animations is mounted. [2025-09-24 05:07:29.139] ubi2:dml_code is mounted. [2025-09-24 05:07:29.139] RTNETLINK answers: File exists [2025-09-24 05:07:29.139] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:07:29.139] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:07:29.139] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:07:29.139] data.LB_FadeInType0=100 [2025-09-24 05:07:29.139] data.CHLH_FadeInType0=0 [2025-09-24 05:07:29.139] data.WU_FadeInDelay=0 [2025-09-24 05:07:29.139] max_time_out=0 [2025-09-24 05:07:29.139] No splash screen [2025-09-24 05:07:29.139] stop dss Done [2025-09-24 05:07:29.139] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:07:29.139] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:07:29.208] /dev/mem opened. [2025-09-24 05:07:29.208] Memory mapped at address 0xffff80473000. [2025-09-24 05:07:29.208] Read at address 0x00600018 (0xffff80473018): 0x00000000 [2025-09-24 05:07:29.208] Write at address 0x00600018 (0xffff80473018): 0x00400040, readback 0x00400040 [2025-09-24 05:07:29.256] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:07:29.272] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:07:29.400] Loaded PowerVR consumer services. [2025-09-24 05:07:29.474] 512+0 records in [2025-09-24 05:07:29.474] 512+0 records out [2025-09-24 05:07:29.474] Waiting data available... [2025-09-24 05:07:29.506] Starting syslogd/klogd: done [2025-09-24 05:07:29.522] DML Start [2025-09-24 05:07:29.714] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:07:29.890] DML res1: 0 [2025-09-24 05:07:30.385] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:07:30.385] Read Success [2025-09-24 05:07:30.402] Verifying certificate... [2025-09-24 05:07:30.626] Verified OK [2025-09-24 05:07:30.642] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:07:32.272] Verified OK [2025-09-24 05:07:32.288] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:07:32.971] Verified OK [2025-09-24 05:07:32.971] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:07:35.529] fs.protected_hardlinks = 1 [2025-09-24 05:07:35.558] fs.protected_symlinks = 1 [2025-09-24 05:07:35.558] kernel.modules_disabled = 1 [2025-09-24 05:07:35.749] [2025-09-24 05:07:35.749] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:07:37.036] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:07:44.851] SBL1:1210.0.1.0 [2025-09-24 05:07:44.883] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:07:46.465] SBL2:1210.0.1.0 [2025-09-24 05:07:46.497] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:07:46.610] j-A [2025-09-24 05:07:53.949] The R5 Autosar Classic is running [2025-09-24 05:07:53.973] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:07:53.973] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:07:54.581] INIT: version 2.96 booting [2025-09-24 05:07:54.693] INIT: Entering runlevel: 5 [2025-09-24 05:07:54.852] mtd28 attached [2025-09-24 05:07:54.868] mtd32 attached [2025-09-24 05:07:54.868] mtd24 attached [2025-09-24 05:07:54.901] ubi0:animations is mounted. [2025-09-24 05:07:54.917] RTNETLINK answers: File exists [2025-09-24 05:07:54.933] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:07:54.933] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:07:54.966] ubi2:textures is mounted. [2025-09-24 05:07:54.966] ubi1:dml_code is mounted. [2025-09-24 05:07:54.966] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:07:54.966] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:07:54.966] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:07:54.966] data.LB_FadeInType0=100 [2025-09-24 05:07:54.966] data.CHLH_FadeInType0=0 [2025-09-24 05:07:54.987] data.WU_FadeInDelay=0 [2025-09-24 05:07:54.987] max_time_out=0 [2025-09-24 05:07:54.987] No splash screen [2025-09-24 05:07:54.987] stop dss Done [2025-09-24 05:07:55.003] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:07:55.019] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:07:55.072] /dev/mem opened. [2025-09-24 05:07:55.072] Memory mapped at address 0xffffa8fb0000. [2025-09-24 05:07:55.072] Read at address 0x00600018 (0xffffa8fb0018): 0x00000000 [2025-09-24 05:07:55.072] Write at address 0x00600018 (0xffffa8fb0018): 0x00400040, readback 0x00400040 [2025-09-24 05:07:55.231] Loaded PowerVR consumer services. [2025-09-24 05:07:55.279] 512+0 records in [2025-09-24 05:07:55.279] 512+0 records out [2025-09-24 05:07:55.296] Waiting data available... [2025-09-24 05:07:55.328] Starting syslogd/klogd: done [2025-09-24 05:07:55.344] DML Start [2025-09-24 05:07:55.535] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:07:55.759] DML res1: 0 [2025-09-24 05:07:56.217] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:07:56.217] Read Success [2025-09-24 05:07:56.217] Verifying certificate... [2025-09-24 05:07:56.505] Verified OK [2025-09-24 05:07:56.521] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:07:58.256] Verified OK [2025-09-24 05:07:58.256] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:07:58.807] Verified OK [2025-09-24 05:07:58.807] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:08:01.301] fs.protected_hardlinks = 1 [2025-09-24 05:08:01.317] fs.protected_symlinks = 1 [2025-09-24 05:08:01.333] kernel.modules_disabled = 1 [2025-09-24 05:08:01.524] [2025-09-24 05:08:01.524] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:08:02.859] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:08:10.656] SBL1:1210.0.1.0 [2025-09-24 05:08:10.704] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:08:12.270] SBL2:1210.0.1.0 [2025-09-24 05:08:12.318] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:08:12.415] j-A [2025-09-24 05:08:19.770] The R5 Autosar Classic is running [2025-09-24 05:08:19.770] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:08:19.791] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:08:20.399] INIT: version 2.96 booting [2025-09-24 05:08:20.512] INIT: Entering runlevel: 5 [2025-09-24 05:08:20.671] mtd28 attached [2025-09-24 05:08:20.671] mtd24 attached [2025-09-24 05:08:20.687] mtd32 attached [2025-09-24 05:08:20.735] RTNETLINK answers: File exists [2025-09-24 05:08:20.735] ubi1:textures is mounted. [2025-09-24 05:08:20.769] ubi0:animations is mounted. [2025-09-24 05:08:20.769] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:08:20.769] ubi2:dml_code is mounted. [2025-09-24 05:08:20.769] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:08:20.769] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:08:20.769] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:08:20.801] data.LB_FadeInType0=100 [2025-09-24 05:08:20.801] data.CHLH_FadeInType0=0 [2025-09-24 05:08:20.801] data.WU_FadeInDelay=0 [2025-09-24 05:08:20.801] max_time_out=0 [2025-09-24 05:08:20.801] No splash screen [2025-09-24 05:08:20.801] stop dss Done [2025-09-24 05:08:20.801] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:08:20.849] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:08:20.886] /dev/mem opened. [2025-09-24 05:08:20.886] Memory mapped at address 0xffff9a03c000. [2025-09-24 05:08:20.886] Read at address 0x00600018 (0xffff9a03c018): 0x00000000 [2025-09-24 05:08:20.886] Write at address 0x00600018 (0xffff9a03c018): 0x00400040, readback 0x00400040 [2025-09-24 05:08:20.886] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:08:20.950] Loaded PowerVR consumer services. [2025-09-24 05:08:21.107] Waiting data available... [2025-09-24 05:08:21.107] 512+0 records in [2025-09-24 05:08:21.107] 512+0 records out [2025-09-24 05:08:21.139] Starting syslogd/klogd: done [2025-09-24 05:08:21.155] DML Start [2025-09-24 05:08:21.314] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:08:21.555] DML res1: 0 [2025-09-24 05:08:21.986] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:08:22.003] Read Success [2025-09-24 05:08:22.003] Verifying certificate... [2025-09-24 05:08:22.274] Verified OK [2025-09-24 05:08:22.290] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:08:23.983] Verified OK [2025-09-24 05:08:23.983] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:08:24.639] Verified OK [2025-09-24 05:08:24.639] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:08:27.277] fs.protected_hardlinks = 1 [2025-09-24 05:08:27.277] fs.protected_symlinks = 1 [2025-09-24 05:08:27.292] kernel.modules_disabled = 1 [2025-09-24 05:08:27.484] [2025-09-24 05:08:27.484] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:08:28.667] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:08:36.497] SBL1:1210.0.1.0 [2025-09-24 05:08:36.546] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:08:38.112] SBL2:1210.0.1.0 [2025-09-24 05:08:38.160] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:08:38.257] j-A [2025-09-24 05:08:45.611] The R5 Autosar Classic is running [2025-09-24 05:08:45.633] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:08:45.633] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:08:46.241] INIT: version 2.96 booting [2025-09-24 05:08:46.353] INIT: Entering runlevel: 5 [2025-09-24 05:08:46.513] mtd28 attached [2025-09-24 05:08:46.513] mtd24 attached [2025-09-24 05:08:46.544] mtd32 attached [2025-09-24 05:08:46.560] ubi0:animations is mounted. [2025-09-24 05:08:46.576] ubi1:textures is mounted. [2025-09-24 05:08:46.639] RTNETLINK answers: File exists [2025-09-24 05:08:46.639] ubi2:dml_code is mounted. [2025-09-24 05:08:46.639] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:08:46.639] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:08:46.639] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:08:46.639] data.LB_FadeInType0=100 [2025-09-24 05:08:46.639] data.CHLH_FadeInType0=0 [2025-09-24 05:08:46.639] data.WU_FadeInDelay=0 [2025-09-24 05:08:46.639] max_time_out=0 [2025-09-24 05:08:46.639] No splash screen [2025-09-24 05:08:46.639] stop dss Done [2025-09-24 05:08:46.639] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:08:46.639] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:08:46.722] /dev/mem opened. [2025-09-24 05:08:46.722] Memory mapped at address 0xffffb65c4000. [2025-09-24 05:08:46.722] Read at address 0x00600018 (0xffffb65c4018): 0x00000000 [2025-09-24 05:08:46.722] Write at address 0x00600018 (0xffffb65c4018): 0x00400040, readback 0x00400040 [2025-09-24 05:08:46.722] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:08:46.738] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:08:46.914] Loaded PowerVR consumer services. [2025-09-24 05:08:46.946] Waiting data available... [2025-09-24 05:08:46.962] 512+0 records in [2025-09-24 05:08:46.962] 512+0 records out [2025-09-24 05:08:46.994] Starting syslogd/klogd: done [2025-09-24 05:08:47.010] DML Start [2025-09-24 05:08:47.202] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:08:47.441] DML res1: 0 [2025-09-24 05:08:47.838] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:08:47.838] Read Success [2025-09-24 05:08:47.838] Verifying certificate... [2025-09-24 05:08:48.126] Verified OK [2025-09-24 05:08:48.158] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:08:49.805] Verified OK [2025-09-24 05:08:49.805] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:08:50.389] Verified OK [2025-09-24 05:08:50.389] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:08:53.059] fs.protected_hardlinks = 1 [2025-09-24 05:08:53.075] fs.protected_symlinks = 1 [2025-09-24 05:08:53.075] kernel.modules_disabled = 1 [2025-09-24 05:08:53.283] [2025-09-24 05:08:53.283] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:08:54.525] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:09:02.316] SBL1:1210.0.1.0 [2025-09-24 05:09:02.365] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:09:03.931] SBL2:1210.0.1.0 [2025-09-24 05:09:03.979] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:09:04.075] j-A [2025-09-24 05:09:11.430] The R5 Autosar Classic is running [2025-09-24 05:09:11.452] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:09:11.452] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:09:12.059] INIT: version 2.96 booting [2025-09-24 05:09:12.171] INIT: Entering runlevel: 5 [2025-09-24 05:09:12.315] mtd24 attached [2025-09-24 05:09:12.331] mtd28 attached [2025-09-24 05:09:12.331] mtd32 attached [2025-09-24 05:09:12.447] RTNETLINK answers: File exists [2025-09-24 05:09:12.447] ubi1:animations is mounted. [2025-09-24 05:09:12.447] ubi0:textures is mounted. [2025-09-24 05:09:12.447] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:09:12.447] ubi2:dml_code is mounted. [2025-09-24 05:09:12.447] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:09:12.447] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:09:12.447] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:09:12.447] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:09:12.447] data.LB_FadeInType0=100 [2025-09-24 05:09:12.447] data.CHLH_FadeInType0=0 [2025-09-24 05:09:12.447] data.WU_FadeInDelay=0 [2025-09-24 05:09:12.447] max_time_out=0 [2025-09-24 05:09:12.447] No splash screen [2025-09-24 05:09:12.447] stop dss Done [2025-09-24 05:09:12.525] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:09:12.525] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:09:12.525] /dev/mem opened. [2025-09-24 05:09:12.525] Memory mapped at address 0xffffb0fb8000. [2025-09-24 05:09:12.525] Read at address 0x00600018 (0xffffb0fb8018): 0x00000000 [2025-09-24 05:09:12.525] Write at address 0x00600018 (0xffffb0fb8018): 0x00400040, readback 0x00400040 [2025-09-24 05:09:12.701] Loaded PowerVR consumer services. [2025-09-24 05:09:12.733] 512+0 records in [2025-09-24 05:09:12.733] 512+0 records out [2025-09-24 05:09:12.765] Waiting data available... [2025-09-24 05:09:12.781] Starting syslogd/klogd: done [2025-09-24 05:09:12.813] DML Start [2025-09-24 05:09:12.989] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:09:13.229] DML res1: 0 [2025-09-24 05:09:13.685] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:09:13.685] Read Success [2025-09-24 05:09:13.685] Verifying certificate... [2025-09-24 05:09:13.908] Verified OK [2025-09-24 05:09:13.924] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:09:15.737] Verified OK [2025-09-24 05:09:15.737] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:09:16.276] Verified OK [2025-09-24 05:09:16.276] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:09:18.755] fs.protected_hardlinks = 1 [2025-09-24 05:09:18.771] fs.protected_symlinks = 1 [2025-09-24 05:09:18.771] kernel.modules_disabled = 1 [2025-09-24 05:09:18.978] [2025-09-24 05:09:18.978] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:09:20.305] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:09:28.161] SBL1:1210.0.1.0 [2025-09-24 05:09:28.209] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:09:29.776] SBL2:1210.0.1.0 [2025-09-24 05:09:29.808] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:09:29.919] j-A [2025-09-24 05:09:37.291] The R5 Autosar Classic is running [2025-09-24 05:09:37.291] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:09:37.291] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:09:37.899] INIT: version 2.96 booting [2025-09-24 05:09:38.011] INIT: Entering runlevel: 5 [2025-09-24 05:09:38.155] mtd24 attached [2025-09-24 05:09:38.171] mtd32 attached [2025-09-24 05:09:38.187] mtd28 attached [2025-09-24 05:09:38.203] ubi0:textures is mounted. [2025-09-24 05:09:38.235] RTNETLINK answers: File exists [2025-09-24 05:09:38.293] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:09:38.293] ubi2:animations is mounted. [2025-09-24 05:09:38.293] ubi1:dml_code is mounted. [2025-09-24 05:09:38.293] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:09:38.293] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:09:38.293] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:09:38.293] data.LB_FadeInType0=100 [2025-09-24 05:09:38.293] data.CHLH_FadeInType0=0 [2025-09-24 05:09:38.293] data.WU_FadeInDelay=0 [2025-09-24 05:09:38.293] max_time_out=0 [2025-09-24 05:09:38.293] No splash screen [2025-09-24 05:09:38.293] stop dss Done [2025-09-24 05:09:38.293] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:09:38.340] /dev/mem opened. [2025-09-24 05:09:38.340] Memory mapped at address 0xffffa203b000. [2025-09-24 05:09:38.372] Read at address 0x00600018 (0xffffa203b018): 0x00000000 [2025-09-24 05:09:38.372] Write at address 0x00600018 (0xffffa203b018): 0x00400040, readback 0x00400040 [2025-09-24 05:09:38.372] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:09:38.372] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:09:38.549] Loaded PowerVR consumer services. [2025-09-24 05:09:38.596] 512+0 records in [2025-09-24 05:09:38.596] 512+0 records out [2025-09-24 05:09:38.628] Waiting data available... [2025-09-24 05:09:38.628] Starting syslogd/klogd: done [2025-09-24 05:09:38.644] DML Start [2025-09-24 05:09:38.837] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:09:39.044] DML res1: 0 [2025-09-24 05:09:39.504] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:09:39.504] Read Success [2025-09-24 05:09:39.504] Verifying certificate... [2025-09-24 05:09:39.744] Verified OK [2025-09-24 05:09:39.760] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:09:41.327] Verified OK [2025-09-24 05:09:41.343] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:09:41.947] Verified OK [2025-09-24 05:09:41.947] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:09:44.713] fs.protected_hardlinks = 1 [2025-09-24 05:09:44.729] fs.protected_symlinks = 1 [2025-09-24 05:09:44.729] kernel.modules_disabled = 1 [2025-09-24 05:09:44.921] [2025-09-24 05:09:44.921] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:09:46.154] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:09:54.007] SBL1:1210.0.1.0 [2025-09-24 05:09:54.055] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:09:55.621] SBL2:1210.0.1.0 [2025-09-24 05:09:55.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:09:55.766] j-A [2025-09-24 05:10:03.139] The R5 Autosar Classic is running [2025-09-24 05:10:03.139] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:10:03.139] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:10:03.746] INIT: version 2.96 booting [2025-09-24 05:10:03.858] INIT: Entering runlevel: 5 [2025-09-24 05:10:04.018] mtd24 attached [2025-09-24 05:10:04.018] mtd28 attached [2025-09-24 05:10:04.050] ubi0:textures is mounted. [2025-09-24 05:10:04.066] mtd32 attached [2025-09-24 05:10:04.066] ubi1:animations is mounted. [2025-09-24 05:10:04.082] RTNETLINK answers: File exists [2025-09-24 05:10:04.126] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:10:04.126] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:10:04.126] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:10:04.126] ubi2:dml_code is mounted. [2025-09-24 05:10:04.126] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:10:04.126] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:10:04.151] data.LB_FadeInType0=100 [2025-09-24 05:10:04.151] data.CHLH_FadeInType0=0 [2025-09-24 05:10:04.151] data.WU_FadeInDelay=0 [2025-09-24 05:10:04.151] max_time_out=0 [2025-09-24 05:10:04.151] No splash screen [2025-09-24 05:10:04.151] stop dss Done [2025-09-24 05:10:04.200] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:10:04.232] /dev/mem opened. [2025-09-24 05:10:04.232] Memory mapped at address 0xffff90c50000. [2025-09-24 05:10:04.232] Read at address 0x00600018 (0xffff90c50018): 0x00000000 [2025-09-24 05:10:04.232] Write at address 0x00600018 (0xffff90c50018): 0x00400040, readback 0x00400040 [2025-09-24 05:10:04.232] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:10:04.296] Loaded PowerVR consumer services. [2025-09-24 05:10:04.461] 512+0 records in [2025-09-24 05:10:04.461] 512+0 records out [2025-09-24 05:10:04.461] Waiting data available... [2025-09-24 05:10:04.493] Starting syslogd/klogd: done [2025-09-24 05:10:04.525] DML Start [2025-09-24 05:10:04.717] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:10:04.909] DML res1: 0 [2025-09-24 05:10:05.357] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:10:05.373] Read Success [2025-09-24 05:10:05.373] Verifying certificate... [2025-09-24 05:10:05.596] Verified OK [2025-09-24 05:10:05.613] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:10:07.306] Verified OK [2025-09-24 05:10:07.306] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:10:07.950] Verified OK [2025-09-24 05:10:07.950] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:10:10.588] fs.protected_hardlinks = 1 [2025-09-24 05:10:10.620] fs.protected_symlinks = 1 [2025-09-24 05:10:10.620] kernel.modules_disabled = 1 [2025-09-24 05:10:10.811] [2025-09-24 05:10:10.811] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:10:12.015] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:10:19.813] SBL1:1210.0.1.0 [2025-09-24 05:10:19.861] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:10:21.429] SBL2:1210.0.1.0 [2025-09-24 05:10:21.461] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:10:21.572] j-A [2025-09-24 05:10:28.927] The R5 Autosar Classic is running [2025-09-24 05:10:28.927] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:10:28.948] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:10:29.555] INIT: version 2.96 booting [2025-09-24 05:10:29.667] INIT: Entering runlevel: 5 [2025-09-24 05:10:29.810] mtd24 attached [2025-09-24 05:10:29.827] mtd28 attached [2025-09-24 05:10:29.843] mtd32 attached [2025-09-24 05:10:29.875] ubi0:textures is mounted. [2025-09-24 05:10:29.891] RTNETLINK answers: File exists [2025-09-24 05:10:29.891] ubi2:dml_code is mounted. [2025-09-24 05:10:29.944] ubi1:animations is mounted. [2025-09-24 05:10:29.944] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:10:29.944] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:10:29.944] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:10:29.944] data.LB_FadeInType0=100 [2025-09-24 05:10:29.944] data.CHLH_FadeInType0=0 [2025-09-24 05:10:29.944] data.WU_FadeInDelay=0 [2025-09-24 05:10:29.944] max_time_out=0 [2025-09-24 05:10:29.944] No splash screen [2025-09-24 05:10:29.944] stop dss Done [2025-09-24 05:10:29.944] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:10:29.944] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:10:30.027] /dev/mem opened. [2025-09-24 05:10:30.027] Memory mapped at address 0xffff96b70000. [2025-09-24 05:10:30.027] Read at address 0x00600018 (0xffff96b70018): 0x00000000 [2025-09-24 05:10:30.027] Write at address 0x00600018 (0xffff96b70018): 0x00400040, readback 0x00400040 [2025-09-24 05:10:30.027] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:10:30.043] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:10:30.123] Loaded PowerVR consumer services. [2025-09-24 05:10:30.235] 512+0 records in [2025-09-24 05:10:30.235] 512+0 records out [2025-09-24 05:10:30.250] Waiting data available... [2025-09-24 05:10:30.298] Starting syslogd/klogd: done [2025-09-24 05:10:30.314] DML Start [2025-09-24 05:10:30.507] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:10:30.731] DML res1: 0 [2025-09-24 05:10:31.206] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:10:31.206] Read Success [2025-09-24 05:10:31.206] Verifying certificate... [2025-09-24 05:10:31.462] Verified OK [2025-09-24 05:10:31.478] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:10:33.134] Verified OK [2025-09-24 05:10:33.134] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:10:33.710] Verified OK [2025-09-24 05:10:33.726] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:10:36.298] fs.protected_hardlinks = 1 [2025-09-24 05:10:36.298] fs.protected_symlinks = 1 [2025-09-24 05:10:36.298] kernel.modules_disabled = 1 [2025-09-24 05:10:36.490] [2025-09-24 05:10:36.490] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:10:37.842] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:10:45.636] SBL1:1210.0.1.0 [2025-09-24 05:10:45.684] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:10:47.250] SBL2:1210.0.1.0 [2025-09-24 05:10:47.283] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:10:47.395] j-A [2025-09-24 05:10:54.749] The R5 Autosar Classic is running [2025-09-24 05:10:54.749] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:10:54.770] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:10:55.377] INIT: version 2.96 booting [2025-09-24 05:10:55.489] INIT: Entering runlevel: 5 [2025-09-24 05:10:55.633] mtd28 attached [2025-09-24 05:10:55.649] mtd24 attached [2025-09-24 05:10:55.665] mtd32 attached [2025-09-24 05:10:55.713] ubi0:animations is mounted. [2025-09-24 05:10:55.713] RTNETLINK answers: File exists [2025-09-24 05:10:55.769] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:10:55.769] ubi1:textures is mounted. [2025-09-24 05:10:55.769] ubi2:dml_code is mounted. [2025-09-24 05:10:55.769] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:10:55.769] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:10:55.769] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:10:55.769] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:10:55.769] data.LB_FadeInType0=100 [2025-09-24 05:10:55.769] data.CHLH_FadeInType0=0 [2025-09-24 05:10:55.769] data.WU_FadeInDelay=0 [2025-09-24 05:10:55.769] max_time_out=0 [2025-09-24 05:10:55.769] No splash screen [2025-09-24 05:10:55.769] stop dss Done [2025-09-24 05:10:55.816] /dev/mem opened. [2025-09-24 05:10:55.816] Memory mapped at address 0xffff8d8d9000. [2025-09-24 05:10:55.853] Read at address 0x00600018 (0xffff8d8d9018): 0x00000000 [2025-09-24 05:10:55.853] Write at address 0x00600018 (0xffff8d8d9018): 0x00400040, readback 0x00400040 [2025-09-24 05:10:55.853] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:10:55.869] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:10:56.060] Loaded PowerVR consumer services. [2025-09-24 05:10:56.076] 512+0 records in [2025-09-24 05:10:56.076] 512+0 records out [2025-09-24 05:10:56.108] Starting syslogd/klogd: done [2025-09-24 05:10:56.140] Waiting data available... [2025-09-24 05:10:56.140] DML Start [2025-09-24 05:10:56.317] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:10:56.556] DML res1: 0 [2025-09-24 05:10:57.004] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:10:57.025] Read Success [2025-09-24 05:10:57.025] Verifying certificate... [2025-09-24 05:10:57.232] Verified OK [2025-09-24 05:10:57.248] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:10:58.958] Verified OK [2025-09-24 05:10:58.958] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:10:59.575] Verified OK [2025-09-24 05:10:59.575] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:11:02.325] fs.protected_hardlinks = 1 [2025-09-24 05:11:02.341] fs.protected_symlinks = 1 [2025-09-24 05:11:02.341] kernel.modules_disabled = 1 [2025-09-24 05:11:02.550] [2025-09-24 05:11:02.550] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:11:03.664] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:11:11.490] SBL1:1210.0.1.0 [2025-09-24 05:11:11.522] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:11:13.105] SBL2:1210.0.1.0 [2025-09-24 05:11:13.137] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:11:13.233] j-A [2025-09-24 05:11:20.587] The R5 Autosar Classic is running [2025-09-24 05:11:20.612] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:11:20.612] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:11:21.220] INIT: version 2.96 booting [2025-09-24 05:11:21.331] INIT: Entering runlevel: 5 [2025-09-24 05:11:21.492] mtd24 attached [2025-09-24 05:11:21.508] mtd32 attached [2025-09-24 05:11:21.524] mtd28 attached [2025-09-24 05:11:21.540] ubi0:textures is mounted. [2025-09-24 05:11:21.556] ubi1:dml_code is mounted. [2025-09-24 05:11:21.572] RTNETLINK answers: File exists [2025-09-24 05:11:21.572] ubi2:animations is mounted. [2025-09-24 05:11:21.635] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:11:21.635] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:11:21.635] data.LB_FadeInType0=100 [2025-09-24 05:11:21.635] data.CHLH_FadeInType0=0 [2025-09-24 05:11:21.635] data.WU_FadeInDelay=0 [2025-09-24 05:11:21.635] max_time_out=0 [2025-09-24 05:11:21.635] No splash screen [2025-09-24 05:11:21.635] stop dss Done [2025-09-24 05:11:21.635] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:11:21.635] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:11:21.635] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:11:21.667] /dev/mem opened. [2025-09-24 05:11:21.667] Memory mapped at address 0xffff7f8cf000. [2025-09-24 05:11:21.693] Read at address 0x00600018 (0xffff7f8cf018): 0x00000000 [2025-09-24 05:11:21.693] Write at address 0x00600018 (0xffff7f8cf018): 0x00400040, readback 0x00400040 [2025-09-24 05:11:21.726] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:11:21.755] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:11:21.899] Loaded PowerVR consumer services. [2025-09-24 05:11:21.931] 512+0 records in [2025-09-24 05:11:21.931] 512+0 records out [2025-09-24 05:11:21.963] Waiting data available... [2025-09-24 05:11:21.963] Starting syslogd/klogd: done [2025-09-24 05:11:21.979] DML Start [2025-09-24 05:11:22.170] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:11:22.378] DML res1: 0 [2025-09-24 05:11:22.847] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:11:22.847] Read Success [2025-09-24 05:11:22.847] Verifying certificate... [2025-09-24 05:11:23.103] Verified OK [2025-09-24 05:11:23.120] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:11:24.766] Verified OK [2025-09-24 05:11:24.766] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:11:25.384] Verified OK [2025-09-24 05:11:25.384] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:11:28.086] fs.protected_hardlinks = 1 [2025-09-24 05:11:28.102] fs.protected_symlinks = 1 [2025-09-24 05:11:28.102] kernel.modules_disabled = 1 [2025-09-24 05:11:28.293] [2025-09-24 05:11:28.293] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:11:29.486] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:11:37.305] SBL1:1210.0.1.0 [2025-09-24 05:11:37.353] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:11:38.920] SBL2:1210.0.1.0 [2025-09-24 05:11:38.968] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:11:39.064] j-A [2025-09-24 05:11:46.420] The R5 Autosar Classic is running [2025-09-24 05:11:46.441] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:11:46.441] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:11:47.049] INIT: version 2.96 booting [2025-09-24 05:11:47.161] INIT: Entering runlevel: 5 [2025-09-24 05:11:47.321] mtd24 attached [2025-09-24 05:11:47.321] mtd28 attached [2025-09-24 05:11:47.337] mtd32 attached [2025-09-24 05:11:47.369] ubi0:textures is mounted. [2025-09-24 05:11:47.385] ubi1:animations is mounted. [2025-09-24 05:11:47.385] RTNETLINK answers: File exists [2025-09-24 05:11:47.446] ubi2:dml_code is mounted. [2025-09-24 05:11:47.446] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:11:47.446] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:11:47.446] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:11:47.446] data.LB_FadeInType0=100 [2025-09-24 05:11:47.446] data.CHLH_FadeInType0=0 [2025-09-24 05:11:47.446] data.WU_FadeInDelay=0 [2025-09-24 05:11:47.446] max_time_out=0 [2025-09-24 05:11:47.446] No splash screen [2025-09-24 05:11:47.446] stop dss Done [2025-09-24 05:11:47.446] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:11:47.446] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:11:47.535] /dev/mem opened. [2025-09-24 05:11:47.535] Memory mapped at address 0xffff90b2d000. [2025-09-24 05:11:47.535] Read at address 0x00600018 (0xffff90b2d018): 0x00000000 [2025-09-24 05:11:47.535] Write at address 0x00600018 (0xffff90b2d018): 0x00400040, readback 0x00400040 [2025-09-24 05:11:47.535] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:11:47.535] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:11:47.599] Loaded PowerVR consumer services. [2025-09-24 05:11:47.754] 512+0 records in [2025-09-24 05:11:47.754] 512+0 records out [2025-09-24 05:11:47.754] Waiting data available... [2025-09-24 05:11:47.754] Starting syslogd/klogd: done [2025-09-24 05:11:47.786] DML Start [2025-09-24 05:11:47.995] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:11:48.218] DML res1: 0 [2025-09-24 05:11:48.591] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:11:48.591] Read Success [2025-09-24 05:11:48.591] Verifying certificate... [2025-09-24 05:11:48.832] Verified OK [2025-09-24 05:11:48.848] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:11:50.475] Verified OK [2025-09-24 05:11:50.475] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:11:51.082] Verified OK [2025-09-24 05:11:51.098] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:11:53.864] fs.protected_hardlinks = 1 [2025-09-24 05:11:53.864] fs.protected_symlinks = 1 [2025-09-24 05:11:53.880] kernel.modules_disabled = 1 [2025-09-24 05:11:54.088] [2025-09-24 05:11:54.088] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:11:55.282] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:12:03.157] SBL1:1210.0.1.0 [2025-09-24 05:12:03.205] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:12:04.772] SBL2:1210.0.1.0 [2025-09-24 05:12:04.803] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:12:04.915] j-A [2025-09-24 05:12:12.291] The R5 Autosar Classic is running [2025-09-24 05:12:12.291] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:12:12.291] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:12:12.898] INIT: version 2.96 booting [2025-09-24 05:12:13.010] INIT: Entering runlevel: 5 [2025-09-24 05:12:13.154] mtd32 attached [2025-09-24 05:12:13.170] mtd24 attached [2025-09-24 05:12:13.186] mtd28 attached [2025-09-24 05:12:13.234] ubi1:textures is mounted. [2025-09-24 05:12:13.234] RTNETLINK answers: File exists [2025-09-24 05:12:13.291] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:12:13.291] ubi0:dml_code is mounted. [2025-09-24 05:12:13.291] ubi2:animations is mounted. [2025-09-24 05:12:13.291] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:12:13.291] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:12:13.291] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:12:13.291] data.LB_FadeInType0=100 [2025-09-24 05:12:13.291] data.CHLH_FadeInType0=0 [2025-09-24 05:12:13.291] data.WU_FadeInDelay=0 [2025-09-24 05:12:13.291] max_time_out=0 [2025-09-24 05:12:13.291] No splash screen [2025-09-24 05:12:13.291] stop dss Done [2025-09-24 05:12:13.291] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:12:13.358] /dev/mem opened. [2025-09-24 05:12:13.358] Memory mapped at address 0xffffb1937000. [2025-09-24 05:12:13.358] Read at address 0x00600018 (0xffffb1937018): 0x00000000 [2025-09-24 05:12:13.358] Write at address 0x00600018 (0xffffb1937018): 0x00400040, readback 0x00400040 [2025-09-24 05:12:13.358] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:12:13.374] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:12:13.485] Loaded PowerVR consumer services. [2025-09-24 05:12:13.610] Waiting data available... [2025-09-24 05:12:13.610] 512+0 records in [2025-09-24 05:12:13.610] 512+0 records out [2025-09-24 05:12:13.642] Starting syslogd/klogd: done [2025-09-24 05:12:13.658] DML Start [2025-09-24 05:12:13.834] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:12:14.058] DML res1: 0 [2025-09-24 05:12:14.545] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:12:14.545] Read Success [2025-09-24 05:12:14.545] Verifying certificate... [2025-09-24 05:12:14.817] Verified OK [2025-09-24 05:12:14.833] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:12:16.470] Verified OK [2025-09-24 05:12:16.470] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:12:17.103] Verified OK [2025-09-24 05:12:17.103] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:12:19.709] fs.protected_hardlinks = 1 [2025-09-24 05:12:19.724] fs.protected_symlinks = 1 [2025-09-24 05:12:19.724] kernel.modules_disabled = 1 [2025-09-24 05:12:19.932] [2025-09-24 05:12:19.932] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:12:21.173] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:12:28.976] SBL1:1210.0.1.0 [2025-09-24 05:12:29.024] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:12:30.592] SBL2:1210.0.1.0 [2025-09-24 05:12:30.623] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:12:30.735] j-A [2025-09-24 05:12:38.110] The R5 Autosar Classic is running [2025-09-24 05:12:38.110] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:12:38.110] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:12:38.718] INIT: version 2.96 booting [2025-09-24 05:12:38.830] INIT: Entering runlevel: 5 [2025-09-24 05:12:38.990] mtd32 attached [2025-09-24 05:12:38.990] mtd24 attached [2025-09-24 05:12:39.006] mtd28 attached [2025-09-24 05:12:39.090] RTNETLINK answers: File exists [2025-09-24 05:12:39.090] ubi0:dml_code is mounted. [2025-09-24 05:12:39.090] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:12:39.090] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:12:39.090] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:12:39.090] ubi2:animations is mounted. [2025-09-24 05:12:39.090] ubi1:textures is mounted. [2025-09-24 05:12:39.090] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:12:39.090] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:12:39.120] data.LB_FadeInType0=100 [2025-09-24 05:12:39.120] data.CHLH_FadeInType0=0 [2025-09-24 05:12:39.120] data.WU_FadeInDelay=0 [2025-09-24 05:12:39.120] max_time_out=0 [2025-09-24 05:12:39.120] No splash screen [2025-09-24 05:12:39.120] stop dss Done [2025-09-24 05:12:39.136] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:12:39.152] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:12:39.190] /dev/mem opened. [2025-09-24 05:12:39.190] Memory mapped at address 0xffff91bd6000. [2025-09-24 05:12:39.190] Read at address 0x00600018 (0xffff91bd6018): 0x00000000 [2025-09-24 05:12:39.190] Write at address 0x00600018 (0xffff91bd6018): 0x00400040, readback 0x00400040 [2025-09-24 05:12:39.318] Loaded PowerVR consumer services. [2025-09-24 05:12:39.451] 512+0 records in [2025-09-24 05:12:39.451] 512+0 records out [2025-09-24 05:12:39.451] Waiting data available... [2025-09-24 05:12:39.483] Starting syslogd/klogd: done [2025-09-24 05:12:39.499] DML Start [2025-09-24 05:12:39.675] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:12:39.898] DML res1: 0 [2025-09-24 05:12:40.307] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:12:40.307] Read Success [2025-09-24 05:12:40.307] Verifying certificate... [2025-09-24 05:12:40.547] Verified OK [2025-09-24 05:12:40.563] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:12:42.303] Verified OK [2025-09-24 05:12:42.303] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:12:42.854] Verified OK [2025-09-24 05:12:42.854] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:12:45.556] fs.protected_hardlinks = 1 [2025-09-24 05:12:45.556] fs.protected_symlinks = 1 [2025-09-24 05:12:45.572] kernel.modules_disabled = 1 [2025-09-24 05:12:45.763] [2025-09-24 05:12:45.763] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:12:46.989] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:12:49.345] SBL1:1210.0.1.0 [2025-09-24 05:12:54.844] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:12:56.411] SBL2:1210.0.1.0 [2025-09-24 05:12:56.459] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:12:56.555] j-A [2025-09-24 05:13:03.911] The R5 Autosar Classic is running [2025-09-24 05:13:03.933] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:13:03.933] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:13:04.541] INIT: version 2.96 booting [2025-09-24 05:13:04.653] INIT: Entering runlevel: 5 [2025-09-24 05:13:04.797] mtd28 attached [2025-09-24 05:13:04.813] mtd32 attached [2025-09-24 05:13:04.829] mtd24 attached [2025-09-24 05:13:04.860] ubi0:animations is mounted. [2025-09-24 05:13:04.877] RTNETLINK answers: File exists [2025-09-24 05:13:04.915] ubi1:dml_code is mounted. [2025-09-24 05:13:04.915] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:13:04.915] ubi2:textures is mounted. [2025-09-24 05:13:04.915] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:13:04.915] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:13:04.915] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:13:04.915] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:13:04.939] data.LB_FadeInType0=100 [2025-09-24 05:13:04.939] data.CHLH_FadeInType0=0 [2025-09-24 05:13:04.939] data.WU_FadeInDelay=0 [2025-09-24 05:13:04.939] max_time_out=0 [2025-09-24 05:13:04.939] No splash screen [2025-09-24 05:13:04.939] stop dss Done [2025-09-24 05:13:04.987] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:13:05.026] /dev/mem opened. [2025-09-24 05:13:05.026] Memory mapped at address 0xffff9bc18000. [2025-09-24 05:13:05.026] Read at address 0x00600018 (0xffff9bc18018): 0x00000000 [2025-09-24 05:13:05.026] Write at address 0x00600018 (0xffff9bc18018): 0x00400040, readback 0x00400040 [2025-09-24 05:13:05.026] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:13:05.186] Loaded PowerVR consumer services. [2025-09-24 05:13:05.254] Waiting data available... [2025-09-24 05:13:05.254] 512+0 records in [2025-09-24 05:13:05.254] 512+0 records out [2025-09-24 05:13:05.270] Starting syslogd/klogd: done [2025-09-24 05:13:05.286] DML Start [2025-09-24 05:13:05.479] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:13:05.702] DML res1: 0 [2025-09-24 05:13:06.102] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:13:06.123] Read Success [2025-09-24 05:13:06.123] Verifying certificate... [2025-09-24 05:13:06.347] Verified OK [2025-09-24 05:13:06.363] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:13:08.005] Verified OK [2025-09-24 05:13:08.005] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:13:08.613] Verified OK [2025-09-24 05:13:08.628] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:13:11.235] fs.protected_hardlinks = 1 [2025-09-24 05:13:11.235] fs.protected_symlinks = 1 [2025-09-24 05:13:11.251] kernel.modules_disabled = 1 [2025-09-24 05:13:11.443] [2025-09-24 05:13:11.443] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:13:12.787] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:13:20.623] SBL1:1210.0.1.0 [2025-09-24 05:13:20.671] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:13:22.237] SBL2:1210.0.1.0 [2025-09-24 05:13:22.270] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:13:22.382] j-A [2025-09-24 05:13:29.753] The R5 Autosar Classic is running [2025-09-24 05:13:29.753] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:13:29.753] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:13:30.361] INIT: version 2.96 booting [2025-09-24 05:13:30.473] INIT: Entering runlevel: 5 [2025-09-24 05:13:30.632] mtd28 attached [2025-09-24 05:13:30.632] mtd24 attached [2025-09-24 05:13:30.649] mtd32 attached [2025-09-24 05:13:30.697] RTNETLINK answers: File exists [2025-09-24 05:13:30.741] ubi1:textures is mounted. [2025-09-24 05:13:30.741] ubi0:animations is mounted. [2025-09-24 05:13:30.741] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:13:30.741] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:13:30.741] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:13:30.741] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:13:30.741] ubi2:dml_code is mounted. [2025-09-24 05:13:30.741] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:13:30.762] data.LB_FadeInType0=100 [2025-09-24 05:13:30.762] data.CHLH_FadeInType0=0 [2025-09-24 05:13:30.762] data.WU_FadeInDelay=0 [2025-09-24 05:13:30.762] max_time_out=0 [2025-09-24 05:13:30.762] No splash screen [2025-09-24 05:13:30.762] stop dss Done [2025-09-24 05:13:30.810] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:13:30.845] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:13:30.845] /dev/mem opened. [2025-09-24 05:13:30.845] Memory mapped at address 0xffff96b30000. [2025-09-24 05:13:30.845] Read at address 0x00600018 (0xffff96b30018): 0x00000000 [2025-09-24 05:13:30.845] Write at address 0x00600018 (0xffff96b30018): 0x00400040, readback 0x00400040 [2025-09-24 05:13:31.038] Loaded PowerVR consumer services. [2025-09-24 05:13:31.053] 512+0 records in [2025-09-24 05:13:31.053] 512+0 records out [2025-09-24 05:13:31.101] Waiting data available... [2025-09-24 05:13:31.117] Starting syslogd/klogd: done [2025-09-24 05:13:31.133] DML Start [2025-09-24 05:13:31.309] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:13:31.533] DML res1: 0 [2025-09-24 05:13:31.965] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:13:31.965] Read Success [2025-09-24 05:13:31.980] Verifying certificate... [2025-09-24 05:13:32.268] Verified OK [2025-09-24 05:13:32.284] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:13:33.996] Verified OK [2025-09-24 05:13:33.996] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:13:34.613] Verified OK [2025-09-24 05:13:34.613] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:13:37.172] fs.protected_hardlinks = 1 [2025-09-24 05:13:37.188] fs.protected_symlinks = 1 [2025-09-24 05:13:37.188] kernel.modules_disabled = 1 [2025-09-24 05:13:37.396] [2025-09-24 05:13:37.396] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:13:38.631] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:13:46.452] SBL1:1210.0.1.0 [2025-09-24 05:13:46.484] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:13:48.067] SBL2:1210.0.1.0 [2025-09-24 05:13:48.099] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:13:48.194] j-A [2025-09-24 05:13:55.548] The R5 Autosar Classic is running [2025-09-24 05:13:55.574] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:13:55.574] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:13:56.180] INIT: version 2.96 booting [2025-09-24 05:13:56.293] INIT: Entering runlevel: 5 [2025-09-24 05:13:56.452] mtd28 attached [2025-09-24 05:13:56.452] mtd24 attached [2025-09-24 05:13:56.468] mtd32 attached [2025-09-24 05:13:56.485] ubi0:animations is mounted. [2025-09-24 05:13:56.517] RTNETLINK answers: File exists [2025-09-24 05:13:56.556] ubi1:textures is mounted. [2025-09-24 05:13:56.556] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:13:56.556] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:13:56.556] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:13:56.556] ubi2:dml_code is mounted. [2025-09-24 05:13:56.556] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:13:56.556] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:13:56.556] data.LB_FadeInType0=100 [2025-09-24 05:13:56.577] data.CHLH_FadeInType0=0 [2025-09-24 05:13:56.577] data.WU_FadeInDelay=0 [2025-09-24 05:13:56.577] max_time_out=0 [2025-09-24 05:13:56.577] No splash screen [2025-09-24 05:13:56.577] stop dss Done [2025-09-24 05:13:56.593] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:13:56.609] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:13:56.646] /dev/mem opened. [2025-09-24 05:13:56.646] Memory mapped at address 0xffff874e5000. [2025-09-24 05:13:56.646] Read at address 0x00600018 (0xffff874e5018): 0x00000000 [2025-09-24 05:13:56.646] Write at address 0x00600018 (0xffff874e5018): 0x00400040, readback 0x00400040 [2025-09-24 05:13:56.789] Loaded PowerVR consumer services. [2025-09-24 05:13:56.900] 512+0 records in [2025-09-24 05:13:56.900] 512+0 records out [2025-09-24 05:13:56.900] Waiting data available... [2025-09-24 05:13:56.932] Starting syslogd/klogd: done [2025-09-24 05:13:56.948] DML Start [2025-09-24 05:13:57.139] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:13:57.379] DML res1: 0 [2025-09-24 05:13:57.791] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:13:57.791] Read Success [2025-09-24 05:13:57.791] Verifying certificate... [2025-09-24 05:13:58.047] Verified OK [2025-09-24 05:13:58.063] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:13:59.738] Verified OK [2025-09-24 05:13:59.738] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:14:00.403] Verified OK [2025-09-24 05:14:00.403] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:14:03.041] fs.protected_hardlinks = 1 [2025-09-24 05:14:03.041] fs.protected_symlinks = 1 [2025-09-24 05:14:03.057] kernel.modules_disabled = 1 [2025-09-24 05:14:03.248] [2025-09-24 05:14:03.248] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:14:04.448] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:14:12.268] SBL1:1210.0.1.0 [2025-09-24 05:14:12.316] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:14:13.884] SBL2:1210.0.1.0 [2025-09-24 05:14:13.931] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:14:14.027] j-A [2025-09-24 05:14:21.381] The R5 Autosar Classic is running [2025-09-24 05:14:21.404] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:14:21.404] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:14:22.012] INIT: version 2.96 booting [2025-09-24 05:14:22.124] INIT: Entering runlevel: 5 [2025-09-24 05:14:22.283] mtd24 attached [2025-09-24 05:14:22.299] mtd32 attached [2025-09-24 05:14:22.299] mtd28 attached [2025-09-24 05:14:22.332] ubi0:textures is mounted. [2025-09-24 05:14:22.364] RTNETLINK answers: File exists [2025-09-24 05:14:22.364] ubi1:dml_code is mounted. [2025-09-24 05:14:22.414] ubi2:animations is mounted. [2025-09-24 05:14:22.414] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:14:22.414] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:14:22.414] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:14:22.414] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:14:22.414] data.LB_FadeInType0=100 [2025-09-24 05:14:22.414] data.CHLH_FadeInType0=0 [2025-09-24 05:14:22.414] data.WU_FadeInDelay=0 [2025-09-24 05:14:22.414] max_time_out=0 [2025-09-24 05:14:22.414] No splash screen [2025-09-24 05:14:22.414] stop dss Done [2025-09-24 05:14:22.414] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:14:22.445] /dev/mem opened. [2025-09-24 05:14:22.477] Memory mapped at address 0xffff92732000. [2025-09-24 05:14:22.477] Read at address 0x00600018 (0xffff92732018): 0x00000000 [2025-09-24 05:14:22.477] Write at address 0x00600018 (0xffff92732018): 0x00400040, readback 0x00400040 [2025-09-24 05:14:22.477] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:14:22.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:14:22.622] Loaded PowerVR consumer services. [2025-09-24 05:14:22.745] Waiting data available... [2025-09-24 05:14:22.745] 512+0 records in [2025-09-24 05:14:22.745] 512+0 records out [2025-09-24 05:14:22.777] Starting syslogd/klogd: done [2025-09-24 05:14:22.793] DML Start [2025-09-24 05:14:22.969] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:14:23.177] DML res1: 0 [2025-09-24 05:14:23.651] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:14:23.651] Read Success [2025-09-24 05:14:23.651] Verifying certificate... [2025-09-24 05:14:23.890] Verified OK [2025-09-24 05:14:23.906] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:14:25.553] Verified OK [2025-09-24 05:14:25.553] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:14:26.206] Verified OK [2025-09-24 05:14:26.207] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:14:28.894] fs.protected_hardlinks = 1 [2025-09-24 05:14:28.894] fs.protected_symlinks = 1 [2025-09-24 05:14:28.909] kernel.modules_disabled = 1 [2025-09-24 05:14:29.101] [2025-09-24 05:14:29.101] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:14:30.284] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:14:38.100] SBL1:1210.0.1.0 [2025-09-24 05:14:38.148] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:14:39.715] SBL2:1210.0.1.0 [2025-09-24 05:14:39.747] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:14:39.858] j-A [2025-09-24 05:14:47.213] The R5 Autosar Classic is running [2025-09-24 05:14:47.213] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:14:47.234] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:14:47.841] INIT: version 2.96 booting [2025-09-24 05:14:47.953] INIT: Entering runlevel: 5 [2025-09-24 05:14:48.113] mtd24 attached [2025-09-24 05:14:48.113] mtd32 attached [2025-09-24 05:14:48.129] mtd28 attached [2025-09-24 05:14:48.176] RTNETLINK answers: File exists [2025-09-24 05:14:48.245] ubi0:textures is mounted. [2025-09-24 05:14:48.245] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:14:48.245] ubi2:animations is mounted. [2025-09-24 05:14:48.245] ubi1:dml_code is mounted. [2025-09-24 05:14:48.245] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:14:48.245] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:14:48.245] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:14:48.245] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:14:48.245] data.LB_FadeInType0=100 [2025-09-24 05:14:48.245] data.CHLH_FadeInType0=0 [2025-09-24 05:14:48.245] data.WU_FadeInDelay=0 [2025-09-24 05:14:48.245] max_time_out=0 [2025-09-24 05:14:48.245] No splash screen [2025-09-24 05:14:48.245] stop dss Done [2025-09-24 05:14:48.276] /dev/mem opened. [2025-09-24 05:14:48.314] Memory mapped at address 0xffffadd6f000. [2025-09-24 05:14:48.314] Read at address 0x00600018 (0xffffadd6f018): 0x00000000 [2025-09-24 05:14:48.314] Write at address 0x00600018 (0xffffadd6f018): 0x00400040, readback 0x00400040 [2025-09-24 05:14:48.314] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:14:48.314] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:14:48.505] Loaded PowerVR consumer services. [2025-09-24 05:14:48.537] 512+0 records in [2025-09-24 05:14:48.537] 512+0 records out [2025-09-24 05:14:48.585] Starting syslogd/klogd: Waiting data available... [2025-09-24 05:14:48.601] done [2025-09-24 05:14:48.601] DML Start [2025-09-24 05:14:48.810] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:14:49.033] DML res1: 0 [2025-09-24 05:14:49.411] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:14:49.411] Read Success [2025-09-24 05:14:49.411] Verifying certificate... [2025-09-24 05:14:49.651] Verified OK [2025-09-24 05:14:49.667] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:14:51.361] Verified OK [2025-09-24 05:14:51.382] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:14:51.971] Verified OK [2025-09-24 05:14:51.971] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:14:54.544] fs.protected_hardlinks = 1 [2025-09-24 05:14:54.544] fs.protected_symlinks = 1 [2025-09-24 05:14:54.544] kernel.modules_disabled = 1 [2025-09-24 05:14:54.735] [2025-09-24 05:14:54.735] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:14:56.125] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:15:03.907] SBL1:1210.0.1.0 [2025-09-24 05:15:03.955] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:15:05.521] SBL2:1210.0.1.0 [2025-09-24 05:15:05.569] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:15:05.666] j-A [2025-09-24 05:15:13.019] The R5 Autosar Classic is running [2025-09-24 05:15:13.043] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:15:13.043] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:15:13.651] INIT: version 2.96 booting [2025-09-24 05:15:13.763] INIT: Entering runlevel: 5 [2025-09-24 05:15:13.923] mtd24 attached [2025-09-24 05:15:13.939] mtd32 attached [2025-09-24 05:15:13.955] mtd28 attached [2025-09-24 05:15:13.955] ubi0:textures is mounted. [2025-09-24 05:15:14.060] RTNETLINK answers: File exists [2025-09-24 05:15:14.060] ubi1:dml_code is mounted. [2025-09-24 05:15:14.060] ubi2:animations is mounted. [2025-09-24 05:15:14.060] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:15:14.060] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:15:14.060] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:15:14.060] data.LB_FadeInType0=100 [2025-09-24 05:15:14.060] data.CHLH_FadeInType0=0 [2025-09-24 05:15:14.060] data.WU_FadeInDelay=0 [2025-09-24 05:15:14.060] max_time_out=0 [2025-09-24 05:15:14.060] No splash screen [2025-09-24 05:15:14.060] stop dss Done [2025-09-24 05:15:14.060] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:15:14.060] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:15:14.128] /dev/mem opened. [2025-09-24 05:15:14.128] Memory mapped at address 0xffff81275000. [2025-09-24 05:15:14.128] Read at address 0x00600018 (0xffff81275018): 0x00000000 [2025-09-24 05:15:14.128] Write at address 0x00600018 (0xffff81275018): 0x00400040, readback 0x00400040 [2025-09-24 05:15:14.128] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:15:14.144] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:15:14.240] Loaded PowerVR consumer services. [2025-09-24 05:15:14.352] Waiting data available... [2025-09-24 05:15:14.368] 512+0 records in [2025-09-24 05:15:14.368] 512+0 records out [2025-09-24 05:15:14.384] Starting syslogd/klogd: done [2025-09-24 05:15:14.416] DML Start [2025-09-24 05:15:14.640] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:15:14.864] DML res1: 0 [2025-09-24 05:15:15.216] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:15:15.237] Read Success [2025-09-24 05:15:15.237] Verifying certificate... [2025-09-24 05:15:15.460] Verified OK [2025-09-24 05:15:15.461] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:15:17.103] Verified OK [2025-09-24 05:15:17.103] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:15:17.754] Verified OK [2025-09-24 05:15:17.754] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:15:20.361] fs.protected_hardlinks = 1 [2025-09-24 05:15:20.361] fs.protected_symlinks = 1 [2025-09-24 05:15:20.377] kernel.modules_disabled = 1 [2025-09-24 05:15:20.584] [2025-09-24 05:15:20.584] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:15:21.922] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:15:29.727] SBL1:1210.0.1.0 [2025-09-24 05:15:29.775] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:15:31.342] SBL2:1210.0.1.0 [2025-09-24 05:15:31.390] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:15:31.486] j-A [2025-09-24 05:15:38.842] The R5 Autosar Classic is running [2025-09-24 05:15:38.842] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:15:38.863] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:15:39.469] INIT: version 2.96 booting [2025-09-24 05:15:39.582] INIT: Entering runlevel: 5 [2025-09-24 05:15:39.725] mtd24 attached [2025-09-24 05:15:39.741] mtd28 attached [2025-09-24 05:15:39.741] mtd32 attached [2025-09-24 05:15:39.806] ubi0:textures is mounted. [2025-09-24 05:15:39.806] RTNETLINK answers: File exists [2025-09-24 05:15:39.840] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:15:39.840] ubi1:animations is mounted. [2025-09-24 05:15:39.840] ubi2:dml_code is mounted. [2025-09-24 05:15:39.840] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:15:39.840] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:15:39.840] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:15:39.840] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:15:39.866] data.LB_FadeInType0=100 [2025-09-24 05:15:39.866] data.CHLH_FadeInType0=0 [2025-09-24 05:15:39.866] data.WU_FadeInDelay=0 [2025-09-24 05:15:39.866] max_time_out=0 [2025-09-24 05:15:39.866] No splash screen [2025-09-24 05:15:39.866] stop dss Done [2025-09-24 05:15:39.882] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:15:39.882] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:15:39.922] /dev/mem opened. [2025-09-24 05:15:39.923] Memory mapped at address 0xffffae37b000. [2025-09-24 05:15:39.923] Read at address 0x00600018 (0xffffae37b018): 0x00000000 [2025-09-24 05:15:39.923] Write at address 0x00600018 (0xffffae37b018): 0x00400040, readback 0x00400040 [2025-09-24 05:15:40.034] Loaded PowerVR consumer services. [2025-09-24 05:15:40.162] Waiting data available... [2025-09-24 05:15:40.178] 512+0 records in [2025-09-24 05:15:40.178] 512+0 records out [2025-09-24 05:15:40.226] Starting syslogd/klogd: done [2025-09-24 05:15:40.242] DML Start [2025-09-24 05:15:40.386] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:15:40.609] DML res1: 0 [2025-09-24 05:15:41.113] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:15:41.113] Read Success [2025-09-24 05:15:41.113] Verifying certificate... [2025-09-24 05:15:41.368] Verified OK [2025-09-24 05:15:41.384] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:15:43.036] Verified OK [2025-09-24 05:15:43.036] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:15:43.634] Verified OK [2025-09-24 05:15:43.634] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:15:46.160] fs.protected_hardlinks = 1 [2025-09-24 05:15:46.176] fs.protected_symlinks = 1 [2025-09-24 05:15:46.176] kernel.modules_disabled = 1 [2025-09-24 05:15:46.384] [2025-09-24 05:15:46.384] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:15:47.734] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:15:55.532] SBL1:1210.0.1.0 [2025-09-24 05:15:55.580] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:15:57.147] SBL2:1210.0.1.0 [2025-09-24 05:15:57.195] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:15:57.290] j-A [2025-09-24 05:16:04.646] The R5 Autosar Classic is running [2025-09-24 05:16:04.646] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:16:04.667] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:16:05.275] INIT: version 2.96 booting [2025-09-24 05:16:05.387] INIT: Entering runlevel: 5 [2025-09-24 05:16:05.530] mtd24 attached [2025-09-24 05:16:05.546] mtd28 attached [2025-09-24 05:16:05.562] mtd32 attached [2025-09-24 05:16:05.610] ubi0:textures is mounted. [2025-09-24 05:16:05.610] RTNETLINK answers: File exists [2025-09-24 05:16:05.669] ubi1:animations is mounted. [2025-09-24 05:16:05.669] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:16:05.669] ubi2:dml_code is mounted. [2025-09-24 05:16:05.669] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:16:05.669] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:16:05.669] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:16:05.669] data.LB_FadeInType0=100 [2025-09-24 05:16:05.669] data.CHLH_FadeInType0=0 [2025-09-24 05:16:05.669] data.WU_FadeInDelay=0 [2025-09-24 05:16:05.669] max_time_out=0 [2025-09-24 05:16:05.669] No splash screen [2025-09-24 05:16:05.669] stop dss Done [2025-09-24 05:16:05.669] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:16:05.758] /dev/mem opened. [2025-09-24 05:16:05.758] Memory mapped at address 0xffff9ef14000. [2025-09-24 05:16:05.758] Read at address 0x00600018 (0xffff9ef14018): 0x00000000 [2025-09-24 05:16:05.758] Write at address 0x00600018 (0xffff9ef14018): 0x00400040, readback 0x00400040 [2025-09-24 05:16:05.758] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:16:05.758] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:16:05.902] Loaded PowerVR consumer services. [2025-09-24 05:16:05.987] Waiting data available... [2025-09-24 05:16:05.987] 512+0 records in [2025-09-24 05:16:05.987] 512+0 records out [2025-09-24 05:16:06.019] Starting syslogd/klogd: done [2025-09-24 05:16:06.035] DML Start [2025-09-24 05:16:06.243] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:16:06.451] DML res1: 0 [2025-09-24 05:16:06.898] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:16:06.919] Read Success [2025-09-24 05:16:06.919] Verifying certificate... [2025-09-24 05:16:07.143] Verified OK [2025-09-24 05:16:07.158] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:16:08.906] Verified OK [2025-09-24 05:16:08.906] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:16:09.443] Verified OK [2025-09-24 05:16:09.443] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:16:11.985] fs.protected_hardlinks = 1 [2025-09-24 05:16:12.011] fs.protected_symlinks = 1 [2025-09-24 05:16:12.011] kernel.modules_disabled = 1 [2025-09-24 05:16:12.203] [2025-09-24 05:16:12.203] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:16:13.540] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:16:21.366] SBL1:1210.0.1.0 [2025-09-24 05:16:21.398] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:16:22.981] SBL2:1210.0.1.0 [2025-09-24 05:16:23.013] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:16:23.124] j-A [2025-09-24 05:16:30.464] The R5 Autosar Classic is running [2025-09-24 05:16:30.495] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:16:30.495] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:16:31.103] INIT: version 2.96 booting [2025-09-24 05:16:31.215] INIT: Entering runlevel: 5 [2025-09-24 05:16:31.374] mtd32 attached [2025-09-24 05:16:31.374] mtd28 attached [2025-09-24 05:16:31.390] mtd24 attached [2025-09-24 05:16:31.439] ubi0:dml_code is mounted. [2025-09-24 05:16:31.439] RTNETLINK answers: File exists [2025-09-24 05:16:31.484] ubi1:animations is mounted. [2025-09-24 05:16:31.484] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:16:31.484] ubi2:textures is mounted. [2025-09-24 05:16:31.484] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:16:31.484] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:16:31.484] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:16:31.484] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:16:31.507] data.LB_FadeInType0=100 [2025-09-24 05:16:31.507] data.CHLH_FadeInType0=0 [2025-09-24 05:16:31.507] data.WU_FadeInDelay=0 [2025-09-24 05:16:31.507] max_time_out=0 [2025-09-24 05:16:31.507] No splash screen [2025-09-24 05:16:31.507] stop dss Done [2025-09-24 05:16:31.539] /dev/mem opened. [2025-09-24 05:16:31.580] Memory mapped at address 0xffff9fce0000. [2025-09-24 05:16:31.580] Read at address 0x00600018 (0xffff9fce0018): 0x00000000 [2025-09-24 05:16:31.580] Write at address 0x00600018 (0xffff9fce0018): 0x00400040, readback 0x00400040 [2025-09-24 05:16:31.580] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:16:31.580] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:16:31.691] Loaded PowerVR consumer services. [2025-09-24 05:16:31.831] 512+0 records in [2025-09-24 05:16:31.831] 512+0 records out [2025-09-24 05:16:31.831] Waiting data available... [2025-09-24 05:16:31.862] Starting syslogd/klogd: done [2025-09-24 05:16:31.878] DML Start [2025-09-24 05:16:32.038] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:16:32.230] DML res1: 0 [2025-09-24 05:16:32.755] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:16:32.755] Read Success [2025-09-24 05:16:32.755] Verifying certificate... [2025-09-24 05:16:33.027] Verified OK [2025-09-24 05:16:33.043] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:16:34.760] Verified OK [2025-09-24 05:16:34.760] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:16:35.380] Verified OK [2025-09-24 05:16:35.380] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:16:37.906] fs.protected_hardlinks = 1 [2025-09-24 05:16:37.922] fs.protected_symlinks = 1 [2025-09-24 05:16:37.922] kernel.modules_disabled = 1 [2025-09-24 05:16:38.115] [2025-09-24 05:16:38.115] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:16:39.385] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:16:47.195] SBL1:1210.0.1.0 [2025-09-24 05:16:47.227] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:16:48.810] SBL2:1210.0.1.0 [2025-09-24 05:16:48.841] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:16:48.953] j-A [2025-09-24 05:16:56.293] The R5 Autosar Classic is running [2025-09-24 05:16:56.318] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:16:56.318] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:16:56.925] INIT: version 2.96 booting [2025-09-24 05:16:57.037] INIT: Entering runlevel: 5 [2025-09-24 05:16:57.198] mtd32 attached [2025-09-24 05:16:57.198] mtd24 attached [2025-09-24 05:16:57.214] mtd28 attached [2025-09-24 05:16:57.262] RTNETLINK answers: File exists [2025-09-24 05:16:57.262] ubi0:dml_code is mounted. [2025-09-24 05:16:57.300] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:16:57.300] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:16:57.300] ubi1:textures is mounted. [2025-09-24 05:16:57.300] ubi2:animations is mounted. [2025-09-24 05:16:57.300] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:16:57.300] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:16:57.300] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:16:57.322] data.LB_FadeInType0=100 [2025-09-24 05:16:57.322] data.CHLH_FadeInType0=0 [2025-09-24 05:16:57.322] data.WU_FadeInDelay=0 [2025-09-24 05:16:57.322] max_time_out=0 [2025-09-24 05:16:57.322] No splash screen [2025-09-24 05:16:57.322] stop dss Done [2025-09-24 05:16:57.413] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:16:57.413] /dev/mem opened. [2025-09-24 05:16:57.413] Memory mapped at address 0xffffac7bc000. [2025-09-24 05:16:57.413] Read at address 0x00600018 (0xffffac7bc018): 0x00000000 [2025-09-24 05:16:57.413] Write at address 0x00600018 (0xffffac7bc018): 0x00400040, readback 0x00400040 [2025-09-24 05:16:57.413] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:16:57.492] Loaded PowerVR consumer services. [2025-09-24 05:16:57.621] 512+0 records in [2025-09-24 05:16:57.621] 512+0 records out [2025-09-24 05:16:57.638] Waiting data available... [2025-09-24 05:16:57.653] Starting syslogd/klogd: done [2025-09-24 05:16:57.669] DML Start [2025-09-24 05:16:57.844] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:16:58.084] DML res1: 0 [2025-09-24 05:16:58.532] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:16:58.548] Read Success [2025-09-24 05:16:58.548] Verifying certificate... [2025-09-24 05:16:58.788] Verified OK [2025-09-24 05:16:58.804] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:17:00.435] Verified OK [2025-09-24 05:17:00.435] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:17:01.106] Verified OK [2025-09-24 05:17:01.106] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:17:03.841] fs.protected_hardlinks = 1 [2025-09-24 05:17:03.872] fs.protected_symlinks = 1 [2025-09-24 05:17:03.872] kernel.modules_disabled = 1 [2025-09-24 05:17:04.047] [2025-09-24 05:17:04.047] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:17:05.150] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:17:12.997] SBL1:1210.0.1.0 [2025-09-24 05:17:13.045] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:17:14.612] SBL2:1210.0.1.0 [2025-09-24 05:17:14.644] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:17:14.756] j-A [2025-09-24 05:17:22.128] The R5 Autosar Classic is running [2025-09-24 05:17:22.128] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:17:22.128] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:17:22.736] INIT: version 2.96 booting [2025-09-24 05:17:22.848] INIT: Entering runlevel: 5 [2025-09-24 05:17:22.991] mtd24 attached [2025-09-24 05:17:23.007] mtd28 attached [2025-09-24 05:17:23.023] mtd32 attached [2025-09-24 05:17:23.071] RTNETLINK answers: File exists [2025-09-24 05:17:23.138] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:17:23.138] ubi0:textures is mounted. [2025-09-24 05:17:23.138] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:17:23.138] ubi1:animations is mounted. [2025-09-24 05:17:23.138] ubi2:dml_code is mounted. [2025-09-24 05:17:23.138] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:17:23.138] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:17:23.138] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:17:23.138] data.LB_FadeInType0=100 [2025-09-24 05:17:23.138] data.CHLH_FadeInType0=0 [2025-09-24 05:17:23.138] data.WU_FadeInDelay=0 [2025-09-24 05:17:23.138] max_time_out=0 [2025-09-24 05:17:23.138] No splash screen [2025-09-24 05:17:23.138] stop dss Done [2025-09-24 05:17:23.166] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:17:23.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:17:23.203] /dev/mem opened. [2025-09-24 05:17:23.203] Memory mapped at address 0xffff95692000. [2025-09-24 05:17:23.203] Read at address 0x00600018 (0xffff95692018): 0x00000000 [2025-09-24 05:17:23.203] Write at address 0x00600018 (0xffff95692018): 0x00400040, readback 0x00400040 [2025-09-24 05:17:23.411] Loaded PowerVR consumer services. [2025-09-24 05:17:23.459] Waiting data available... [2025-09-24 05:17:23.459] 512+0 records in [2025-09-24 05:17:23.459] 512+0 records out [2025-09-24 05:17:23.491] Starting syslogd/klogd: done [2025-09-24 05:17:23.508] DML Start [2025-09-24 05:17:23.730] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:17:23.939] DML res1: 0 [2025-09-24 05:17:24.336] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:17:24.336] Read Success [2025-09-24 05:17:24.336] Verifying certificate... [2025-09-24 05:17:24.560] Verified OK [2025-09-24 05:17:24.576] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:17:26.231] Verified OK [2025-09-24 05:17:26.231] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:17:26.878] Verified OK [2025-09-24 05:17:26.878] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:17:29.532] fs.protected_hardlinks = 1 [2025-09-24 05:17:29.548] fs.protected_symlinks = 1 [2025-09-24 05:17:29.548] kernel.modules_disabled = 1 [2025-09-24 05:17:29.740] [2025-09-24 05:17:29.740] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:17:31.014] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:17:38.805] SBL1:1210.0.1.0 [2025-09-24 05:17:38.853] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:17:40.419] SBL2:1210.0.1.0 [2025-09-24 05:17:40.467] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:17:40.563] j-A [2025-09-24 05:17:47.917] The R5 Autosar Classic is running [2025-09-24 05:17:47.939] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:17:47.939] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:17:48.547] INIT: version 2.96 booting [2025-09-24 05:17:48.659] INIT: Entering runlevel: 5 [2025-09-24 05:17:48.803] mtd28 attached [2025-09-24 05:17:48.819] mtd24 attached [2025-09-24 05:17:48.835] mtd32 attached [2025-09-24 05:17:48.851] ubi0:animations is mounted. [2025-09-24 05:17:48.883] ubi1:textures is mounted. [2025-09-24 05:17:48.883] RTNETLINK answers: File exists [2025-09-24 05:17:48.941] ubi2:dml_code is mounted. [2025-09-24 05:17:48.941] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:17:48.941] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:17:48.941] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:17:48.941] data.LB_FadeInType0=100 [2025-09-24 05:17:48.941] data.CHLH_FadeInType0=0 [2025-09-24 05:17:48.941] data.WU_FadeInDelay=0 [2025-09-24 05:17:48.941] max_time_out=0 [2025-09-24 05:17:48.941] No splash screen [2025-09-24 05:17:48.941] stop dss Done [2025-09-24 05:17:48.941] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:17:48.941] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:17:48.998] /dev/mem opened. [2025-09-24 05:17:48.998] Memory mapped at address 0xffffa2eba000. [2025-09-24 05:17:48.998] Read at address 0x00600018 (0xffffa2eba018): 0x00000000 [2025-09-24 05:17:48.998] Write at address 0x00600018 (0xffffa2eba018): 0x00400040, readback 0x00400040 [2025-09-24 05:17:49.028] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:17:49.028] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:17:49.220] Loaded PowerVR consumer services. [2025-09-24 05:17:49.252] 512+0 records in [2025-09-24 05:17:49.252] 512+0 records out [2025-09-24 05:17:49.284] Starting syslogd/klogd: done [2025-09-24 05:17:49.300] Waiting data available... [2025-09-24 05:17:49.316] DML Start [2025-09-24 05:17:49.508] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:17:49.731] DML res1: 0 [2025-09-24 05:17:50.174] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:17:50.174] Read Success [2025-09-24 05:17:50.174] Verifying certificate... [2025-09-24 05:17:50.413] Verified OK [2025-09-24 05:17:50.429] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:17:52.077] Verified OK [2025-09-24 05:17:52.077] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:17:52.668] Verified OK [2025-09-24 05:17:52.668] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:17:55.339] fs.protected_hardlinks = 1 [2025-09-24 05:17:55.339] fs.protected_symlinks = 1 [2025-09-24 05:17:55.355] kernel.modules_disabled = 1 [2025-09-24 05:17:55.578] [2025-09-24 05:17:55.578] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:17:56.803] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:18:04.623] SBL1:1210.0.1.0 [2025-09-24 05:18:04.655] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:18:06.238] SBL2:1210.0.1.0 [2025-09-24 05:18:06.270] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:18:06.382] j-A [2025-09-24 05:18:13.752] The R5 Autosar Classic is running [2025-09-24 05:18:13.752] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:18:13.752] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:18:14.360] INIT: version 2.96 booting [2025-09-24 05:18:14.472] INIT: Entering runlevel: 5 [2025-09-24 05:18:14.632] mtd32 attached [2025-09-24 05:18:14.632] mtd28 attached [2025-09-24 05:18:14.648] mtd24 attached [2025-09-24 05:18:14.696] ubi0:dml_code is mounted. [2025-09-24 05:18:14.696] RTNETLINK answers: File exists [2025-09-24 05:18:14.754] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:18:14.754] ubi2:textures is mounted. [2025-09-24 05:18:14.754] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:18:14.754] ubi1:animations is mounted. [2025-09-24 05:18:14.754] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:18:14.754] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:18:14.754] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:18:14.754] data.LB_FadeInType0=100 [2025-09-24 05:18:14.754] data.CHLH_FadeInType0=0 [2025-09-24 05:18:14.754] data.WU_FadeInDelay=0 [2025-09-24 05:18:14.754] max_time_out=0 [2025-09-24 05:18:14.754] No splash screen [2025-09-24 05:18:14.754] stop dss Done [2025-09-24 05:18:14.787] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:18:14.835] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:18:14.835] /dev/mem opened. [2025-09-24 05:18:14.835] Memory mapped at address 0xffff9f20d000. [2025-09-24 05:18:14.835] Read at address 0x00600018 (0xffff9f20d018): 0x00000000 [2025-09-24 05:18:14.835] Write at address 0x00600018 (0xffff9f20d018): 0x00400040, readback 0x00400040 [2025-09-24 05:18:14.931] Loaded PowerVR consumer services. [2025-09-24 05:18:15.026] 512+0 records in [2025-09-24 05:18:15.043] 512+0 records out [2025-09-24 05:18:15.059] Waiting data available... [2025-09-24 05:18:15.091] Starting syslogd/klogd: done [2025-09-24 05:18:15.107] DML Start [2025-09-24 05:18:15.250] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:18:15.474] DML res1: 0 [2025-09-24 05:18:15.986] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:18:16.002] Read Success [2025-09-24 05:18:16.002] Verifying certificate... [2025-09-24 05:18:16.210] Verified OK [2025-09-24 05:18:16.226] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:18:17.947] Verified OK [2025-09-24 05:18:17.947] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:18:18.490] Verified OK [2025-09-24 05:18:18.490] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:18:21.112] fs.protected_hardlinks = 1 [2025-09-24 05:18:21.112] fs.protected_symlinks = 1 [2025-09-24 05:18:21.128] kernel.modules_disabled = 1 [2025-09-24 05:18:21.320] [2025-09-24 05:18:21.320] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:18:22.615] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:18:30.428] SBL1:1210.0.1.0 [2025-09-24 05:18:30.460] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:18:32.043] SBL2:1210.0.1.0 [2025-09-24 05:18:32.076] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:18:32.187] j-A [2025-09-24 05:18:39.525] The R5 Autosar Classic is running [2025-09-24 05:18:39.550] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:18:39.550] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:18:40.157] INIT: version 2.96 booting [2025-09-24 05:18:40.269] INIT: Entering runlevel: 5 [2025-09-24 05:18:40.413] mtd24 attached [2025-09-24 05:18:40.429] mtd28 attached [2025-09-24 05:18:40.445] mtd32 attached [2025-09-24 05:18:40.493] ubi1:animations is mounted. [2025-09-24 05:18:40.494] RTNETLINK answers: File exists [2025-09-24 05:18:40.551] ubi0:textures is mounted. [2025-09-24 05:18:40.551] ubi2:dml_code is mounted. [2025-09-24 05:18:40.551] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:18:40.551] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:18:40.551] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:18:40.551] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:18:40.551] data.LB_FadeInType0=100 [2025-09-24 05:18:40.551] data.CHLH_FadeInType0=0 [2025-09-24 05:18:40.551] data.WU_FadeInDelay=0 [2025-09-24 05:18:40.551] max_time_out=0 [2025-09-24 05:18:40.551] No splash screen [2025-09-24 05:18:40.551] stop dss Done [2025-09-24 05:18:40.551] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:18:40.624] /dev/mem opened. [2025-09-24 05:18:40.624] Memory mapped at address 0xffff80692000. [2025-09-24 05:18:40.624] Read at address 0x00600018 (0xffff80692018): 0x00000000 [2025-09-24 05:18:40.624] Write at address 0x00600018 (0xffff80692018): 0x00400040, readback 0x00400040 [2025-09-24 05:18:40.640] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:18:40.656] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:18:40.815] Loaded PowerVR consumer services. [2025-09-24 05:18:40.880] 512+0 records in [2025-09-24 05:18:40.880] 512+0 records out [2025-09-24 05:18:40.880] Waiting data available... [2025-09-24 05:18:40.928] Starting syslogd/klogd: done [2025-09-24 05:18:40.960] DML Start [2025-09-24 05:18:41.120] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:18:41.327] DML res1: 0 [2025-09-24 05:18:41.832] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:18:41.832] Read Success [2025-09-24 05:18:41.832] Verifying certificate... [2025-09-24 05:18:42.055] Verified OK [2025-09-24 05:18:42.071] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:18:43.840] Verified OK [2025-09-24 05:18:43.840] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:18:44.344] Verified OK [2025-09-24 05:18:44.344] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:18:46.886] fs.protected_hardlinks = 1 [2025-09-24 05:18:46.917] fs.protected_symlinks = 1 [2025-09-24 05:18:46.917] kernel.modules_disabled = 1 [2025-09-24 05:18:47.093] [2025-09-24 05:18:47.093] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:18:48.444] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:18:56.228] SBL1:1210.0.1.0 [2025-09-24 05:18:56.276] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:18:57.843] SBL2:1210.0.1.0 [2025-09-24 05:18:57.875] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:18:57.988] j-A [2025-09-24 05:19:05.341] The R5 Autosar Classic is running [2025-09-24 05:19:05.341] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:19:05.362] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:19:05.969] INIT: version 2.96 booting [2025-09-24 05:19:06.081] INIT: Entering runlevel: 5 [2025-09-24 05:19:06.241] mtd24 attached [2025-09-24 05:19:06.241] mtd28 attached [2025-09-24 05:19:06.257] mtd32 attached [2025-09-24 05:19:06.305] RTNETLINK answers: File exists [2025-09-24 05:19:06.321] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:19:06.321] ubi0:textures is mounted. [2025-09-24 05:19:06.373] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:19:06.373] ubi2:dml_code is mounted. [2025-09-24 05:19:06.373] ubi1:animations is mounted. [2025-09-24 05:19:06.373] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:19:06.373] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:19:06.373] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:19:06.373] data.LB_FadeInType0=100 [2025-09-24 05:19:06.373] data.CHLH_FadeInType0=0 [2025-09-24 05:19:06.373] data.WU_FadeInDelay=0 [2025-09-24 05:19:06.373] max_time_out=0 [2025-09-24 05:19:06.373] No splash screen [2025-09-24 05:19:06.373] stop dss Done [2025-09-24 05:19:06.421] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:19:06.421] /dev/mem opened. [2025-09-24 05:19:06.453] Memory mapped at address 0xffff89068000. [2025-09-24 05:19:06.453] Read at address 0x00600018 (0xffff89068018): 0x00000000 [2025-09-24 05:19:06.453] Write at address 0x00600018 (0xffff89068018): 0x00400040, readback 0x00400040 [2025-09-24 05:19:06.453] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:19:06.645] Loaded PowerVR consumer services. [2025-09-24 05:19:06.677] 512+0 records in [2025-09-24 05:19:06.677] 512+0 records out [2025-09-24 05:19:06.709] Starting syslogd/klogd: Waiting data available... [2025-09-24 05:19:06.725] done [2025-09-24 05:19:06.741] DML Start [2025-09-24 05:19:06.885] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:19:07.173] DML res1: 0 [2025-09-24 05:19:07.562] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:19:07.562] Read Success [2025-09-24 05:19:07.562] Verifying certificate... [2025-09-24 05:19:07.801] Verified OK [2025-09-24 05:19:07.817] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:19:09.528] Verified OK [2025-09-24 05:19:09.528] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:19:10.200] Verified OK [2025-09-24 05:19:10.222] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:19:12.969] fs.protected_hardlinks = 1 [2025-09-24 05:19:12.969] fs.protected_symlinks = 1 [2025-09-24 05:19:12.969] kernel.modules_disabled = 1 [2025-09-24 05:19:13.144] [2025-09-24 05:19:13.144] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:19:14.259] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:19:22.032] SBL1:1210.0.1.0 [2025-09-24 05:19:22.064] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:19:23.647] SBL2:1210.0.1.0 [2025-09-24 05:19:23.679] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:19:23.775] j-A [2025-09-24 05:19:31.129] The R5 Autosar Classic is running [2025-09-24 05:19:31.154] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:19:31.154] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:19:31.762] INIT: version 2.96 booting [2025-09-24 05:19:31.873] INIT: Entering runlevel: 5 [2025-09-24 05:19:32.017] mtd24 attached [2025-09-24 05:19:32.033] mtd28 attached [2025-09-24 05:19:32.049] mtd32 attached [2025-09-24 05:19:32.149] ubi0:textures is mounted. [2025-09-24 05:19:32.149] RTNETLINK answers: File exists [2025-09-24 05:19:32.149] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:19:32.149] ubi1:animations is mounted. [2025-09-24 05:19:32.149] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:19:32.149] ubi2:dml_code is mounted. [2025-09-24 05:19:32.149] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:19:32.149] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:19:32.149] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:19:32.149] data.LB_FadeInType0=100 [2025-09-24 05:19:32.149] data.CHLH_FadeInType0=0 [2025-09-24 05:19:32.149] data.WU_FadeInDelay=0 [2025-09-24 05:19:32.149] max_time_out=0 [2025-09-24 05:19:32.149] No splash screen [2025-09-24 05:19:32.149] stop dss Done [2025-09-24 05:19:32.222] /dev/mem opened. [2025-09-24 05:19:32.222] Memory mapped at address 0xffffa19a8000. [2025-09-24 05:19:32.222] Read at address 0x00600018 (0xffffa19a8018): 0x00000000 [2025-09-24 05:19:32.222] Write at address 0x00600018 (0xffffa19a8018): 0x00400040, readback 0x00400040 [2025-09-24 05:19:32.222] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:19:32.254] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:19:32.317] Loaded PowerVR consumer services. [2025-09-24 05:19:32.446] 512+0 records in [2025-09-24 05:19:32.446] 512+0 records out [2025-09-24 05:19:32.478] Starting syslogd/klogd: Waiting data available... [2025-09-24 05:19:32.493] done [2025-09-24 05:19:32.493] DML Start [2025-09-24 05:19:32.686] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:19:32.926] DML res1: 0 [2025-09-24 05:19:33.355] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:19:33.355] Read Success [2025-09-24 05:19:33.355] Verifying certificate... [2025-09-24 05:19:33.643] Verified OK [2025-09-24 05:19:33.659] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:19:35.343] Verified OK [2025-09-24 05:19:35.343] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:19:35.981] Verified OK [2025-09-24 05:19:35.981] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:19:38.604] fs.protected_hardlinks = 1 [2025-09-24 05:19:38.604] fs.protected_symlinks = 1 [2025-09-24 05:19:38.620] kernel.modules_disabled = 1 [2025-09-24 05:19:38.812] [2025-09-24 05:19:38.812] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:19:39.971] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:19:47.873] SBL1:1210.0.1.0 [2025-09-24 05:19:47.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:19:49.487] SBL2:1210.0.1.0 [2025-09-24 05:19:49.519] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:19:49.632] j-A [2025-09-24 05:19:57.003] The R5 Autosar Classic is running [2025-09-24 05:19:57.003] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:19:57.003] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:19:57.610] INIT: version 2.96 booting [2025-09-24 05:19:57.722] INIT: Entering runlevel: 5 [2025-09-24 05:19:57.866] mtd24 attached [2025-09-24 05:19:57.882] mtd28 attached [2025-09-24 05:19:57.898] mtd32 attached [2025-09-24 05:19:57.930] ubi1:animations is mounted. [2025-09-24 05:19:57.946] RTNETLINK answers: File exists [2025-09-24 05:19:57.946] ubi0:textures is mounted. [2025-09-24 05:19:58.008] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:19:58.008] ubi2:dml_code is mounted. [2025-09-24 05:19:58.008] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:19:58.008] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:19:58.008] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:19:58.008] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:19:58.008] data.LB_FadeInType0=100 [2025-09-24 05:19:58.008] data.CHLH_FadeInType0=0 [2025-09-24 05:19:58.008] data.WU_FadeInDelay=0 [2025-09-24 05:19:58.008] max_time_out=0 [2025-09-24 05:19:58.008] No splash screen [2025-09-24 05:19:58.008] stop dss Done [2025-09-24 05:19:58.082] /dev/mem opened. [2025-09-24 05:19:58.082] Memory mapped at address 0xffffa5862000. [2025-09-24 05:19:58.082] Read at address 0x00600018 (0xffffa5862018): 0x00000000 [2025-09-24 05:19:58.082] Write at address 0x00600018 (0xffffa5862018): 0x00400040, readback 0x00400040 [2025-09-24 05:19:58.082] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:19:58.082] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:19:58.274] Loaded PowerVR consumer services. [2025-09-24 05:19:58.322] 512+0 records in [2025-09-24 05:19:58.322] 512+0 records out [2025-09-24 05:19:58.338] Starting syslogd/klogd: done [2025-09-24 05:19:58.386] Waiting data available... [2025-09-24 05:19:58.402] DML Start [2025-09-24 05:19:58.610] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:19:58.802] DML res1: 0 [2025-09-24 05:19:59.288] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:19:59.288] Read Success [2025-09-24 05:19:59.288] Verifying certificate... [2025-09-24 05:19:59.528] Verified OK [2025-09-24 05:19:59.544] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:20:01.298] Verified OK [2025-09-24 05:20:01.298] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:20:01.887] Verified OK [2025-09-24 05:20:01.887] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:20:04.445] fs.protected_hardlinks = 1 [2025-09-24 05:20:04.461] fs.protected_symlinks = 1 [2025-09-24 05:20:04.461] kernel.modules_disabled = 1 [2025-09-24 05:20:04.652] [2025-09-24 05:20:04.652] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:20:05.863] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:20:13.695] SBL1:1210.0.1.0 [2025-09-24 05:20:13.727] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:20:15.309] SBL2:1210.0.1.0 [2025-09-24 05:20:15.341] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:20:15.454] j-A [2025-09-24 05:20:22.826] The R5 Autosar Classic is running [2025-09-24 05:20:22.826] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:20:22.826] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:20:23.434] INIT: version 2.96 booting [2025-09-24 05:20:23.529] INIT: Entering runlevel: 5 [2025-09-24 05:20:23.689] mtd24 attached [2025-09-24 05:20:23.705] mtd28 attached [2025-09-24 05:20:23.721] ubi0:textures is mounted. [2025-09-24 05:20:23.737] mtd32 attached [2025-09-24 05:20:23.753] ubi1:animations is mounted. [2025-09-24 05:20:23.769] RTNETLINK answers: File exists [2025-09-24 05:20:23.769] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:20:23.798] ubi2:dml_code is mounted. [2025-09-24 05:20:23.798] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:20:23.798] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:20:23.798] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:20:23.798] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:20:23.824] data.LB_FadeInType0=100 [2025-09-24 05:20:23.824] data.CHLH_FadeInType0=0 [2025-09-24 05:20:23.824] data.WU_FadeInDelay=0 [2025-09-24 05:20:23.824] max_time_out=0 [2025-09-24 05:20:23.824] No splash screen [2025-09-24 05:20:23.824] stop dss Done [2025-09-24 05:20:23.898] /dev/mem opened. [2025-09-24 05:20:23.898] Memory mapped at address 0xffffb7847000. [2025-09-24 05:20:23.898] Read at address 0x00600018 (0xffffb7847018): 0x00000000 [2025-09-24 05:20:23.898] Write at address 0x00600018 (0xffffb7847018): 0x00400040, readback 0x00400040 [2025-09-24 05:20:23.898] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:20:23.898] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:20:24.010] Loaded PowerVR consumer services. [2025-09-24 05:20:24.138] Waiting data available... [2025-09-24 05:20:24.138] 512+0 records in [2025-09-24 05:20:24.154] 512+0 records out [2025-09-24 05:20:24.202] Starting syslogd/klogd: done [2025-09-24 05:20:24.218] DML Start [2025-09-24 05:20:24.394] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:20:24.633] DML res1: 0 [2025-09-24 05:20:25.028] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:20:25.028] Read Success [2025-09-24 05:20:25.028] Verifying certificate... [2025-09-24 05:20:25.252] Verified OK [2025-09-24 05:20:25.267] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:20:26.941] Verified OK [2025-09-24 05:20:26.941] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:20:27.547] Verified OK [2025-09-24 05:20:27.547] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:20:30.217] fs.protected_hardlinks = 1 [2025-09-24 05:20:30.217] fs.protected_symlinks = 1 [2025-09-24 05:20:30.233] kernel.modules_disabled = 1 [2025-09-24 05:20:30.424] [2025-09-24 05:20:30.424] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:20:31.718] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:20:39.509] SBL1:1210.0.1.0 [2025-09-24 05:20:39.541] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:20:41.124] SBL2:1210.0.1.0 [2025-09-24 05:20:41.156] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:20:41.267] j-A [2025-09-24 05:20:48.606] The R5 Autosar Classic is running [2025-09-24 05:20:48.632] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:20:48.632] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:20:49.240] INIT: version 2.96 booting [2025-09-24 05:20:49.367] INIT: Entering runlevel: 5 [2025-09-24 05:20:49.511] mtd24 attached [2025-09-24 05:20:49.527] mtd28 attached [2025-09-24 05:20:49.527] mtd32 attached [2025-09-24 05:20:49.575] RTNETLINK answers: File exists [2025-09-24 05:20:49.627] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:20:49.627] ubi0:textures is mounted. [2025-09-24 05:20:49.627] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:20:49.627] ubi1:animations is mounted. [2025-09-24 05:20:49.627] ubi2:dml_code is mounted. [2025-09-24 05:20:49.627] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:20:49.627] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:20:49.627] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:20:49.648] data.LB_FadeInType0=100 [2025-09-24 05:20:49.648] data.CHLH_FadeInType0=0 [2025-09-24 05:20:49.648] data.WU_FadeInDelay=0 [2025-09-24 05:20:49.648] max_time_out=0 [2025-09-24 05:20:49.648] No splash screen [2025-09-24 05:20:49.648] stop dss Done [2025-09-24 05:20:49.664] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:20:49.664] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:20:49.696] /dev/mem opened. [2025-09-24 05:20:49.728] Memory mapped at address 0xffff88bda000. [2025-09-24 05:20:49.728] Read at address 0x00600018 (0xffff88bda018): 0x00000000 [2025-09-24 05:20:49.728] Write at address 0x00600018 (0xffff88bda018): 0x00400040, readback 0x00400040 [2025-09-24 05:20:49.856] Loaded PowerVR consumer services. [2025-09-24 05:20:49.981] Waiting data available... [2025-09-24 05:20:49.981] 512+0 records in [2025-09-24 05:20:49.981] 512+0 records out [2025-09-24 05:20:50.013] Starting syslogd/klogd: done [2025-09-24 05:20:50.029] DML Start [2025-09-24 05:20:50.205] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:20:50.445] DML res1: 0 [2025-09-24 05:20:50.868] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:20:50.868] Read Success [2025-09-24 05:20:50.868] Verifying certificate... [2025-09-24 05:20:51.092] Verified OK [2025-09-24 05:20:51.108] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:20:52.825] Verified OK [2025-09-24 05:20:52.825] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:20:53.423] Verified OK [2025-09-24 05:20:53.423] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:20:55.933] fs.protected_hardlinks = 1 [2025-09-24 05:20:55.959] fs.protected_symlinks = 1 [2025-09-24 05:20:55.959] kernel.modules_disabled = 1 [2025-09-24 05:20:56.135] [2025-09-24 05:20:56.135] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:20:57.541] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:21:05.321] SBL1:1210.0.1.0 [2025-09-24 05:21:05.369] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:21:06.936] SBL2:1210.0.1.0 [2025-09-24 05:21:06.983] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:21:07.079] j-A [2025-09-24 05:21:14.435] The R5 Autosar Classic is running [2025-09-24 05:21:14.458] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:21:14.458] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:21:15.066] INIT: version 2.96 booting [2025-09-24 05:21:15.178] INIT: Entering runlevel: 5 [2025-09-24 05:21:15.322] mtd24 attached [2025-09-24 05:21:15.338] mtd28 attached [2025-09-24 05:21:15.354] mtd32 attached [2025-09-24 05:21:15.386] ubi0:textures is mounted. [2025-09-24 05:21:15.402] RTNETLINK answers: File exists [2025-09-24 05:21:15.402] ubi2:dml_code is mounted. [2025-09-24 05:21:15.452] ubi1:animations is mounted. [2025-09-24 05:21:15.452] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:21:15.452] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:21:15.452] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:21:15.452] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:21:15.452] data.LB_FadeInType0=100 [2025-09-24 05:21:15.452] data.CHLH_FadeInType0=0 [2025-09-24 05:21:15.452] data.WU_FadeInDelay=0 [2025-09-24 05:21:15.452] max_time_out=0 [2025-09-24 05:21:15.452] No splash screen [2025-09-24 05:21:15.452] stop dss Done [2025-09-24 05:21:15.452] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:21:15.526] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:21:15.526] /dev/mem opened. [2025-09-24 05:21:15.526] Memory mapped at address 0xffff867be000. [2025-09-24 05:21:15.526] Read at address 0x00600018 (0xffff867be018): 0x00000000 [2025-09-24 05:21:15.526] Write at address 0x00600018 (0xffff867be018): 0x00400040, readback 0x00400040 [2025-09-24 05:21:15.526] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:21:15.734] Loaded PowerVR consumer services. [2025-09-24 05:21:15.766] 512+0 records in [2025-09-24 05:21:15.766] 512+0 records out [2025-09-24 05:21:15.782] Waiting data available... [2025-09-24 05:21:15.813] Starting syslogd/klogd: done [2025-09-24 05:21:15.829] DML Start [2025-09-24 05:21:16.005] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:21:16.230] DML res1: 0 [2025-09-24 05:21:16.735] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:21:16.735] Read Success [2025-09-24 05:21:16.735] Verifying certificate... [2025-09-24 05:21:16.958] Verified OK [2025-09-24 05:21:16.974] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:21:18.746] Verified OK [2025-09-24 05:21:18.746] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:21:19.252] Verified OK [2025-09-24 05:21:19.252] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:21:21.777] fs.protected_hardlinks = 1 [2025-09-24 05:21:21.777] fs.protected_symlinks = 1 [2025-09-24 05:21:21.777] kernel.modules_disabled = 1 [2025-09-24 05:21:21.969] [2025-09-24 05:21:21.969] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:21:23.361] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:21:31.118] SBL1:1210.0.1.0 [2025-09-24 05:21:31.150] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:21:32.732] SBL2:1210.0.1.0 [2025-09-24 05:21:32.764] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:21:32.876] j-A [2025-09-24 05:21:40.216] The R5 Autosar Classic is running [2025-09-24 05:21:40.247] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:21:40.247] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:21:40.854] INIT: version 2.96 booting [2025-09-24 05:21:40.950] INIT: Entering runlevel: 5 [2025-09-24 05:21:41.110] mtd24 attached [2025-09-24 05:21:41.126] mtd28 attached [2025-09-24 05:21:41.142] mtd32 attached [2025-09-24 05:21:41.175] RTNETLINK answers: File exists [2025-09-24 05:21:41.221] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:21:41.221] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:21:41.221] ubi0:textures is mounted. [2025-09-24 05:21:41.221] ubi1:animations is mounted. [2025-09-24 05:21:41.221] ubi2:dml_code is mounted. [2025-09-24 05:21:41.221] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:21:41.221] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:21:41.221] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:21:41.243] data.LB_FadeInType0=100 [2025-09-24 05:21:41.243] data.CHLH_FadeInType0=0 [2025-09-24 05:21:41.243] data.WU_FadeInDelay=0 [2025-09-24 05:21:41.243] max_time_out=0 [2025-09-24 05:21:41.243] No splash screen [2025-09-24 05:21:41.243] stop dss Done [2025-09-24 05:21:41.323] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:21:41.323] /dev/mem opened. [2025-09-24 05:21:41.323] Memory mapped at address 0xffff94505000. [2025-09-24 05:21:41.323] Read at address 0x00600018 (0xffff94505018): 0x00000000 [2025-09-24 05:21:41.323] Write at address 0x00600018 (0xffff94505018): 0x00400040, readback 0x00400040 [2025-09-24 05:21:41.323] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:21:41.419] Loaded PowerVR consumer services. [2025-09-24 05:21:41.547] 512+0 records in [2025-09-24 05:21:41.547] 512+0 records out [2025-09-24 05:21:41.579] Waiting data available... [2025-09-24 05:21:41.611] Starting syslogd/klogd: done [2025-09-24 05:21:41.627] DML Start [2025-09-24 05:21:41.787] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:21:41.995] DML res1: 0 [2025-09-24 05:21:42.491] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:21:42.507] Read Success [2025-09-24 05:21:42.507] Verifying certificate... [2025-09-24 05:21:42.730] Verified OK [2025-09-24 05:21:42.746] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:21:44.629] Verified OK [2025-09-24 05:21:44.629] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:21:45.093] Verified OK [2025-09-24 05:21:45.093] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:21:47.507] fs.protected_hardlinks = 1 [2025-09-24 05:21:47.507] fs.protected_symlinks = 1 [2025-09-24 05:21:47.523] kernel.modules_disabled = 1 [2025-09-24 05:21:47.715] [2025-09-24 05:21:47.715] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:21:49.101] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:21:56.935] SBL1:1210.0.1.0 [2025-09-24 05:21:56.983] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:21:58.550] SBL2:1210.0.1.0 [2025-09-24 05:21:58.597] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:21:58.694] j-A [2025-09-24 05:22:06.049] The R5 Autosar Classic is running [2025-09-24 05:22:06.070] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:22:06.070] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:22:06.677] INIT: version 2.96 booting [2025-09-24 05:22:06.789] INIT: Entering runlevel: 5 [2025-09-24 05:22:06.949] mtd24 attached [2025-09-24 05:22:06.949] mtd28 attached [2025-09-24 05:22:06.981] mtd32 attached [2025-09-24 05:22:07.013] ubi0:textures is mounted. [2025-09-24 05:22:07.080] RTNETLINK answers: File exists [2025-09-24 05:22:07.080] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:22:07.080] ubi1:animations is mounted. [2025-09-24 05:22:07.080] ubi2:dml_code is mounted. [2025-09-24 05:22:07.080] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:22:07.080] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:22:07.080] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:22:07.080] data.LB_FadeInType0=100 [2025-09-24 05:22:07.080] data.CHLH_FadeInType0=0 [2025-09-24 05:22:07.080] data.WU_FadeInDelay=0 [2025-09-24 05:22:07.080] max_time_out=0 [2025-09-24 05:22:07.080] No splash screen [2025-09-24 05:22:07.080] stop dss Done [2025-09-24 05:22:07.080] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:22:07.150] /dev/mem opened. [2025-09-24 05:22:07.150] Memory mapped at address 0xffff88ced000. [2025-09-24 05:22:07.150] Read at address 0x00600018 (0xffff88ced018): 0x00000000 [2025-09-24 05:22:07.150] Write at address 0x00600018 (0xffff88ced018): 0x00400040, readback 0x00400040 [2025-09-24 05:22:07.150] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:22:07.150] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:22:07.246] Loaded PowerVR consumer services. [2025-09-24 05:22:07.390] 512+0 records in [2025-09-24 05:22:07.390] 512+0 records out [2025-09-24 05:22:07.406] Waiting data available... [2025-09-24 05:22:07.438] Starting syslogd/klogd: done [2025-09-24 05:22:07.454] DML Start [2025-09-24 05:22:07.646] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:22:07.870] DML res1: 0 [2025-09-24 05:22:08.334] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:22:08.334] Read Success [2025-09-24 05:22:08.350] Verifying certificate... [2025-09-24 05:22:08.590] Verified OK [2025-09-24 05:22:08.606] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:22:10.429] Verified OK [2025-09-24 05:22:10.429] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:22:10.977] Verified OK [2025-09-24 05:22:10.977] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:22:13.455] fs.protected_hardlinks = 1 [2025-09-24 05:22:13.455] fs.protected_symlinks = 1 [2025-09-24 05:22:13.471] kernel.modules_disabled = 1 [2025-09-24 05:22:13.663] [2025-09-24 05:22:13.663] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:22:14.947] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:22:22.754] SBL1:1210.0.1.0 [2025-09-24 05:22:22.802] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:22:24.368] SBL2:1210.0.1.0 [2025-09-24 05:22:24.400] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:22:24.512] j-A [2025-09-24 05:22:31.886] The R5 Autosar Classic is running [2025-09-24 05:22:31.886] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:22:31.886] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:22:32.494] INIT: version 2.96 booting [2025-09-24 05:22:32.606] INIT: Entering runlevel: 5 [2025-09-24 05:22:32.749] mtd24 attached [2025-09-24 05:22:32.765] mtd28 attached [2025-09-24 05:22:32.782] mtd32 attached [2025-09-24 05:22:32.798] ubi0:textures is mounted. [2025-09-24 05:22:32.859] RTNETLINK answers: File exists [2025-09-24 05:22:32.859] ubi1:animations is mounted. [2025-09-24 05:22:32.859] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:22:32.859] ubi2:dml_code is mounted. [2025-09-24 05:22:32.859] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:22:32.859] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:22:32.859] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:22:32.888] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:22:32.888] data.LB_FadeInType0=100 [2025-09-24 05:22:32.888] data.CHLH_FadeInType0=0 [2025-09-24 05:22:32.888] data.WU_FadeInDelay=0 [2025-09-24 05:22:32.888] max_time_out=0 [2025-09-24 05:22:32.888] No splash screen [2025-09-24 05:22:32.888] stop dss Done [2025-09-24 05:22:32.960] /dev/mem opened. [2025-09-24 05:22:32.960] Memory mapped at address 0xffffbee5f000. [2025-09-24 05:22:32.960] Read at address 0x00600018 (0xffffbee5f018): 0x00000000 [2025-09-24 05:22:32.960] Write at address 0x00600018 (0xffffbee5f018): 0x00400040, readback 0x00400040 [2025-09-24 05:22:32.976] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:22:33.001] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:22:33.113] Loaded PowerVR consumer services. [2025-09-24 05:22:33.193] 512+0 records in [2025-09-24 05:22:33.193] 512+0 records out [2025-09-24 05:22:33.209] Waiting data available... [2025-09-24 05:22:33.240] Starting syslogd/klogd: done [2025-09-24 05:22:33.256] DML Start [2025-09-24 05:22:33.433] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:22:33.656] DML res1: 0 [2025-09-24 05:22:34.087] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:22:34.087] Read Success [2025-09-24 05:22:34.087] Verifying certificate... [2025-09-24 05:22:34.327] Verified OK [2025-09-24 05:22:34.343] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:22:36.019] Verified OK [2025-09-24 05:22:36.019] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:22:36.659] Verified OK [2025-09-24 05:22:36.659] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:22:39.233] fs.protected_hardlinks = 1 [2025-09-24 05:22:39.250] fs.protected_symlinks = 1 [2025-09-24 05:22:39.250] kernel.modules_disabled = 1 [2025-09-24 05:22:39.457] [2025-09-24 05:22:39.457] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:22:40.748] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:22:48.577] SBL1:1210.0.1.0 [2025-09-24 05:22:48.625] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:22:50.191] SBL2:1210.0.1.0 [2025-09-24 05:22:50.222] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:22:50.335] j-A [2025-09-24 05:22:57.708] The R5 Autosar Classic is running [2025-09-24 05:22:57.708] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:22:57.708] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:22:58.315] INIT: version 2.96 booting [2025-09-24 05:22:58.428] INIT: Entering runlevel: 5 [2025-09-24 05:22:58.587] mtd28 attached [2025-09-24 05:22:58.587] mtd24 attached [2025-09-24 05:22:58.619] mtd32 attached [2025-09-24 05:22:58.635] ubi1:textures is mounted. [2025-09-24 05:22:58.651] ubi0:animations is mounted. [2025-09-24 05:22:58.651] RTNETLINK answers: File exists [2025-09-24 05:22:58.716] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:22:58.716] ubi2:dml_code is mounted. [2025-09-24 05:22:58.716] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:22:58.716] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:22:58.716] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:22:58.716] data.LB_FadeInType0=100 [2025-09-24 05:22:58.716] data.CHLH_FadeInType0=0 [2025-09-24 05:22:58.716] data.WU_FadeInDelay=0 [2025-09-24 05:22:58.716] max_time_out=0 [2025-09-24 05:22:58.716] No splash screen [2025-09-24 05:22:58.716] stop dss Done [2025-09-24 05:22:58.716] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:22:58.748] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:22:58.790] /dev/mem opened. [2025-09-24 05:22:58.790] Memory mapped at address 0xffff9f3b5000. [2025-09-24 05:22:58.790] Read at address 0x00600018 (0xffff9f3b5018): 0x00000000 [2025-09-24 05:22:58.790] Write at address 0x00600018 (0xffff9f3b5018): 0x00400040, readback 0x00400040 [2025-09-24 05:22:58.790] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:22:58.870] Loaded PowerVR consumer services. [2025-09-24 05:22:59.014] Waiting data available... [2025-09-24 05:22:59.030] 512+0 records in [2025-09-24 05:22:59.030] 512+0 records out [2025-09-24 05:22:59.078] Starting syslogd/klogd: done [2025-09-24 05:22:59.094] DML Start [2025-09-24 05:22:59.270] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:22:59.494] DML res1: 0 [2025-09-24 05:22:59.940] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:22:59.940] Read Success [2025-09-24 05:22:59.940] Verifying certificate... [2025-09-24 05:23:00.227] Verified OK [2025-09-24 05:23:00.259] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:23:01.959] Verified OK [2025-09-24 05:23:01.959] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:23:02.487] Verified OK [2025-09-24 05:23:02.487] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:23:05.045] fs.protected_hardlinks = 1 [2025-09-24 05:23:05.045] fs.protected_symlinks = 1 [2025-09-24 05:23:05.061] kernel.modules_disabled = 1 [2025-09-24 05:23:05.237] [2025-09-24 05:23:05.237] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:23:06.595] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:23:14.390] SBL1:1210.0.1.0 [2025-09-24 05:23:14.422] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:23:16.005] SBL2:1210.0.1.0 [2025-09-24 05:23:16.037] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:23:16.148] j-A [2025-09-24 05:23:23.486] The R5 Autosar Classic is running [2025-09-24 05:23:23.517] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:23:23.517] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:23:24.124] INIT: version 2.96 booting [2025-09-24 05:23:24.236] INIT: Entering runlevel: 5 [2025-09-24 05:23:24.396] mtd28 attached [2025-09-24 05:23:24.396] mtd32 attached [2025-09-24 05:23:24.412] mtd24 attached [2025-09-24 05:23:24.460] ubi0:animations is mounted. [2025-09-24 05:23:24.460] RTNETLINK answers: File exists [2025-09-24 05:23:24.521] ubi2:textures is mounted. [2025-09-24 05:23:24.521] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:23:24.521] ubi1:dml_code is mounted. [2025-09-24 05:23:24.521] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:23:24.521] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:23:24.521] data.LB_FadeInType0=100 [2025-09-24 05:23:24.521] data.CHLH_FadeInType0=0 [2025-09-24 05:23:24.521] data.WU_FadeInDelay=0 [2025-09-24 05:23:24.521] max_time_out=0 [2025-09-24 05:23:24.521] No splash screen [2025-09-24 05:23:24.521] stop dss Done [2025-09-24 05:23:24.521] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:23:24.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:23:24.590] /dev/mem opened. [2025-09-24 05:23:24.590] Memory mapped at address 0xffff9d600000. [2025-09-24 05:23:24.590] Read at address 0x00600018 (0xffff9d600018): 0x00000000 [2025-09-24 05:23:24.590] Write at address 0x00600018 (0xffff9d600018): 0x00400040, readback 0x00400040 [2025-09-24 05:23:24.621] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:23:24.621] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:23:24.718] Loaded PowerVR consumer services. [2025-09-24 05:23:24.830] 512+0 records in [2025-09-24 05:23:24.830] 512+0 records out [2025-09-24 05:23:24.862] Waiting data available... [2025-09-24 05:23:24.894] Starting syslogd/klogd: done [2025-09-24 05:23:24.910] DML Start [2025-09-24 05:23:25.101] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:23:25.325] DML res1: 0 [2025-09-24 05:23:25.769] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:23:25.769] Read Success [2025-09-24 05:23:25.769] Verifying certificate... [2025-09-24 05:23:26.089] Verified OK [2025-09-24 05:23:26.121] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:23:27.783] Verified OK [2025-09-24 05:23:27.783] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:23:28.359] Verified OK [2025-09-24 05:23:28.359] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:23:31.030] fs.protected_hardlinks = 1 [2025-09-24 05:23:31.030] fs.protected_symlinks = 1 [2025-09-24 05:23:31.045] kernel.modules_disabled = 1 [2025-09-24 05:23:31.252] [2025-09-24 05:23:31.252] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:23:32.383] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:23:40.190] SBL1:1210.0.1.0 [2025-09-24 05:23:40.222] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:23:41.805] SBL2:1210.0.1.0 [2025-09-24 05:23:41.837] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:23:41.932] j-A [2025-09-24 05:23:49.286] The R5 Autosar Classic is running [2025-09-24 05:23:49.311] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:23:49.311] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:23:49.919] INIT: version 2.96 booting [2025-09-24 05:23:50.031] INIT: Entering runlevel: 5 [2025-09-24 05:23:50.175] mtd24 attached [2025-09-24 05:23:50.191] mtd28 attached [2025-09-24 05:23:50.207] mtd32 attached [2025-09-24 05:23:50.254] RTNETLINK answers: File exists [2025-09-24 05:23:50.254] ubi0:textures is mounted. [2025-09-24 05:23:50.295] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:23:50.295] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:23:50.295] ubi2:dml_code is mounted. [2025-09-24 05:23:50.295] ubi1:animations is mounted. [2025-09-24 05:23:50.295] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:23:50.295] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:23:50.295] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:23:50.317] data.LB_FadeInType0=100 [2025-09-24 05:23:50.317] data.CHLH_FadeInType0=0 [2025-09-24 05:23:50.317] data.WU_FadeInDelay=0 [2025-09-24 05:23:50.317] max_time_out=0 [2025-09-24 05:23:50.317] No splash screen [2025-09-24 05:23:50.317] stop dss Done [2025-09-24 05:23:50.393] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:23:50.393] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:23:50.393] /dev/mem opened. [2025-09-24 05:23:50.393] Memory mapped at address 0xffff9e237000. [2025-09-24 05:23:50.393] Read at address 0x00600018 (0xffff9e237018): 0x00000000 [2025-09-24 05:23:50.393] Write at address 0x00600018 (0xffff9e237018): 0x00400040, readback 0x00400040 [2025-09-24 05:23:50.585] Loaded PowerVR consumer services. [2025-09-24 05:23:50.648] Waiting data available... [2025-09-24 05:23:50.648] 512+0 records in [2025-09-24 05:23:50.648] 512+0 records out [2025-09-24 05:23:50.664] Starting syslogd/klogd: done [2025-09-24 05:23:50.680] DML Start [2025-09-24 05:23:50.872] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:23:51.096] DML res1: 0 [2025-09-24 05:23:51.560] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:23:51.576] Read Success [2025-09-24 05:23:51.576] Verifying certificate... [2025-09-24 05:23:51.800] Verified OK [2025-09-24 05:23:51.815] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:23:53.412] Verified OK [2025-09-24 05:23:53.412] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:23:54.027] Verified OK [2025-09-24 05:23:54.027] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:23:56.841] fs.protected_hardlinks = 1 [2025-09-24 05:23:56.857] fs.protected_symlinks = 1 [2025-09-24 05:23:56.857] kernel.modules_disabled = 1 [2025-09-24 05:23:57.065] [2025-09-24 05:23:57.065] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:23:58.258] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:24:05.981] SBL1:1210.0.1.0 [2025-09-24 05:24:06.029] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:24:07.596] SBL2:1210.0.1.0 [2025-09-24 05:24:07.627] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:24:07.739] j-A [2025-09-24 05:24:15.094] The R5 Autosar Classic is running [2025-09-24 05:24:15.094] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:24:15.114] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:24:15.723] INIT: version 2.96 booting [2025-09-24 05:24:15.834] INIT: Entering runlevel: 5 [2025-09-24 05:24:15.994] mtd24 attached [2025-09-24 05:24:15.994] mtd28 attached [2025-09-24 05:24:16.010] mtd32 attached [2025-09-24 05:24:16.058] ubi0:textures is mounted. [2025-09-24 05:24:16.058] RTNETLINK answers: File exists [2025-09-24 05:24:16.074] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:24:16.074] ubi1:animations is mounted. [2025-09-24 05:24:16.133] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:24:16.133] ubi2:dml_code is mounted. [2025-09-24 05:24:16.133] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:24:16.133] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:24:16.133] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:24:16.133] data.LB_FadeInType0=100 [2025-09-24 05:24:16.133] data.CHLH_FadeInType0=0 [2025-09-24 05:24:16.133] data.WU_FadeInDelay=0 [2025-09-24 05:24:16.133] max_time_out=0 [2025-09-24 05:24:16.133] No splash screen [2025-09-24 05:24:16.133] stop dss Done [2025-09-24 05:24:16.214] /dev/mem opened. [2025-09-24 05:24:16.214] Memory mapped at address 0xffff8d790000. [2025-09-24 05:24:16.214] Read at address 0x00600018 (0xffff8d790018): 0x00000000 [2025-09-24 05:24:16.214] Write at address 0x00600018 (0xffff8d790018): 0x00400040, readback 0x00400040 [2025-09-24 05:24:16.214] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:24:16.214] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:24:16.278] Loaded PowerVR consumer services. [2025-09-24 05:24:16.447] 512+0 records in [2025-09-24 05:24:16.447] 512+0 records out [2025-09-24 05:24:16.447] Waiting data available... [2025-09-24 05:24:16.464] Starting syslogd/klogd: done [2025-09-24 05:24:16.480] DML Start [2025-09-24 05:24:16.623] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:24:16.814] DML res1: 0 [2025-09-24 05:24:17.355] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:24:17.355] Read Success [2025-09-24 05:24:17.355] Verifying certificate... [2025-09-24 05:24:17.627] Verified OK [2025-09-24 05:24:17.642] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:24:19.279] Verified OK [2025-09-24 05:24:19.279] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:24:19.868] Verified OK [2025-09-24 05:24:19.868] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:24:22.426] fs.protected_hardlinks = 1 [2025-09-24 05:24:22.426] fs.protected_symlinks = 1 [2025-09-24 05:24:22.442] kernel.modules_disabled = 1 [2025-09-24 05:24:22.618] [2025-09-24 05:24:22.618] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:24:23.989] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:24:31.805] SBL1:1210.0.1.0 [2025-09-24 05:24:31.854] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:24:33.420] SBL2:1210.0.1.0 [2025-09-24 05:24:33.468] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:24:33.564] j-A [2025-09-24 05:24:40.920] The R5 Autosar Classic is running [2025-09-24 05:24:40.942] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:24:40.942] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:24:41.549] INIT: version 2.96 booting [2025-09-24 05:24:41.661] INIT: Entering runlevel: 5 [2025-09-24 05:24:41.821] mtd28 attached [2025-09-24 05:24:41.821] mtd24 attached [2025-09-24 05:24:41.837] mtd32 attached [2025-09-24 05:24:41.869] ubi0:animations is mounted. [2025-09-24 05:24:41.885] RTNETLINK answers: File exists [2025-09-24 05:24:41.885] ubi1:textures is mounted. [2025-09-24 05:24:41.947] ubi2:dml_code is mounted. [2025-09-24 05:24:41.947] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:24:41.947] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:24:41.947] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:24:41.947] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:24:41.947] data.LB_FadeInType0=100 [2025-09-24 05:24:41.947] data.CHLH_FadeInType0=0 [2025-09-24 05:24:41.947] data.WU_FadeInDelay=0 [2025-09-24 05:24:41.947] max_time_out=0 [2025-09-24 05:24:41.947] No splash screen [2025-09-24 05:24:41.947] stop dss Done [2025-09-24 05:24:41.947] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:24:41.995] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:24:41.995] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:24:42.027] /dev/mem opened. [2025-09-24 05:24:42.027] Memory mapped at address 0xffffbbd1a000. [2025-09-24 05:24:42.027] Read at address 0x00600018 (0xffffbbd1a018): 0x00000000 [2025-09-24 05:24:42.027] Write at address 0x00600018 (0xffffbbd1a018): 0x00400040, readback 0x00400040 [2025-09-24 05:24:42.236] Loaded PowerVR consumer services. [2025-09-24 05:24:42.282] Waiting data available... [2025-09-24 05:24:42.282] 512+0 records in [2025-09-24 05:24:42.282] 512+0 records out [2025-09-24 05:24:42.298] Starting syslogd/klogd: done [2025-09-24 05:24:42.314] DML Start [2025-09-24 05:24:42.458] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:24:42.715] DML res1: 0 [2025-09-24 05:24:43.194] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:24:43.215] Read Success [2025-09-24 05:24:43.215] Verifying certificate... [2025-09-24 05:24:43.455] Verified OK [2025-09-24 05:24:43.487] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:24:45.239] Verified OK [2025-09-24 05:24:45.239] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:24:45.798] Verified OK [2025-09-24 05:24:45.798] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:24:48.452] fs.protected_hardlinks = 1 [2025-09-24 05:24:48.452] fs.protected_symlinks = 1 [2025-09-24 05:24:48.467] kernel.modules_disabled = 1 [2025-09-24 05:24:48.659] [2025-09-24 05:24:48.659] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:24:49.820] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:24:57.624] SBL1:1210.0.1.0 [2025-09-24 05:24:57.672] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:24:59.239] SBL2:1210.0.1.0 [2025-09-24 05:24:59.271] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:24:59.383] j-A [2025-09-24 05:25:06.759] The R5 Autosar Classic is running [2025-09-24 05:25:06.759] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:25:06.759] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:25:07.367] INIT: version 2.96 booting [2025-09-24 05:25:07.478] INIT: Entering runlevel: 5 [2025-09-24 05:25:07.638] mtd28 attached [2025-09-24 05:25:07.638] mtd24 attached [2025-09-24 05:25:07.654] mtd32 attached [2025-09-24 05:25:07.703] ubi0:animations is mounted. [2025-09-24 05:25:07.703] ubi1:textures is mounted. [2025-09-24 05:25:07.719] RTNETLINK answers: File exists [2025-09-24 05:25:07.719] ubi2:dml_code is mounted. [2025-09-24 05:25:07.755] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:25:07.755] data.LB_FadeInType0=100 [2025-09-24 05:25:07.755] data.CHLH_FadeInType0=0 [2025-09-24 05:25:07.755] data.WU_FadeInDelay=0 [2025-09-24 05:25:07.755] max_time_out=0 [2025-09-24 05:25:07.755] No splash screen [2025-09-24 05:25:07.755] stop dss Done [2025-09-24 05:25:07.755] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:25:07.755] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:25:07.771] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:25:07.771] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:25:07.787] /dev/mem opened. [2025-09-24 05:25:07.787] Memory mapped at address 0xffffb6a22000. [2025-09-24 05:25:07.813] Read at address 0x00600018 (0xffffb6a22018): 0x00000000 [2025-09-24 05:25:07.813] Write at address 0x00600018 (0xffffb6a22018): 0x00400040, readback 0x00400040 [2025-09-24 05:25:07.892] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:25:07.909] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:25:08.021] Loaded PowerVR consumer services. [2025-09-24 05:25:08.099] 512+0 records in [2025-09-24 05:25:08.099] 512+0 records out [2025-09-24 05:25:08.099] Waiting data available... [2025-09-24 05:25:08.131] Starting syslogd/klogd: done [2025-09-24 05:25:08.147] DML Start [2025-09-24 05:25:08.340] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:25:08.580] DML res1: 0 [2025-09-24 05:25:08.979] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:25:08.979] Read Success [2025-09-24 05:25:08.995] Verifying certificate... [2025-09-24 05:25:09.235] Verified OK [2025-09-24 05:25:09.251] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:25:10.930] Verified OK [2025-09-24 05:25:10.930] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:25:11.537] Verified OK [2025-09-24 05:25:11.537] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:25:14.079] fs.protected_hardlinks = 1 [2025-09-24 05:25:14.079] fs.protected_symlinks = 1 [2025-09-24 05:25:14.095] kernel.modules_disabled = 1 [2025-09-24 05:25:14.287] [2025-09-24 05:25:14.287] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:25:15.652] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:25:23.439] SBL1:1210.0.1.0 [2025-09-24 05:25:23.487] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:25:25.053] SBL2:1210.0.1.0 [2025-09-24 05:25:25.101] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:25:25.197] j-A [2025-09-24 05:25:32.552] The R5 Autosar Classic is running [2025-09-24 05:25:32.576] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:25:32.576] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:25:33.184] INIT: version 2.96 booting [2025-09-24 05:25:33.295] INIT: Entering runlevel: 5 [2025-09-24 05:25:33.455] mtd24 attached [2025-09-24 05:25:33.455] mtd28 attached [2025-09-24 05:25:33.471] mtd32 attached [2025-09-24 05:25:33.519] RTNETLINK answers: File exists [2025-09-24 05:25:33.519] ubi1:animations is mounted. [2025-09-24 05:25:33.535] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:25:33.568] ubi2:dml_code is mounted. [2025-09-24 05:25:33.568] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:25:33.568] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:25:33.568] ubi0:textures is mounted. [2025-09-24 05:25:33.568] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:25:33.568] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:25:33.568] data.LB_FadeInType0=100 [2025-09-24 05:25:33.568] data.CHLH_FadeInType0=0 [2025-09-24 05:25:33.589] data.WU_FadeInDelay=0 [2025-09-24 05:25:33.589] max_time_out=0 [2025-09-24 05:25:33.589] No splash screen [2025-09-24 05:25:33.589] stop dss Done [2025-09-24 05:25:33.662] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:25:33.662] /dev/mem opened. [2025-09-24 05:25:33.662] Memory mapped at address 0xffffb11f7000. [2025-09-24 05:25:33.662] Read at address 0x00600018 (0xffffb11f7018): 0x00000000 [2025-09-24 05:25:33.662] Write at address 0x00600018 (0xffffb11f7018): 0x00400040, readback 0x00400040 [2025-09-24 05:25:33.662] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:25:33.805] Loaded PowerVR consumer services. [2025-09-24 05:25:33.901] Waiting data available... [2025-09-24 05:25:33.917] 512+0 records in [2025-09-24 05:25:33.917] 512+0 records out [2025-09-24 05:25:33.933] Starting syslogd/klogd: done [2025-09-24 05:25:33.965] DML Start [2025-09-24 05:25:34.141] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:25:34.364] DML res1: 0 [2025-09-24 05:25:34.853] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:25:34.853] Read Success [2025-09-24 05:25:34.853] Verifying certificate... [2025-09-24 05:25:35.092] Verified OK [2025-09-24 05:25:35.124] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:25:36.914] Verified OK [2025-09-24 05:25:36.914] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:25:37.410] Verified OK [2025-09-24 05:25:37.425] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:25:39.824] fs.protected_hardlinks = 1 [2025-09-24 05:25:39.840] fs.protected_symlinks = 1 [2025-09-24 05:25:39.840] kernel.modules_disabled = 1 [2025-09-24 05:25:40.047] [2025-09-24 05:25:40.047] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:25:41.449] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:25:49.261] SBL1:1210.0.1.0 [2025-09-24 05:25:49.309] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:25:50.875] SBL2:1210.0.1.0 [2025-09-24 05:25:50.907] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:25:51.019] j-A [2025-09-24 05:25:58.392] The R5 Autosar Classic is running [2025-09-24 05:25:58.392] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:25:58.392] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:25:58.999] INIT: version 2.96 booting [2025-09-24 05:25:59.112] INIT: Entering runlevel: 5 [2025-09-24 05:25:59.271] mtd32 attached [2025-09-24 05:25:59.287] mtd28 attached [2025-09-24 05:25:59.287] mtd24 attached [2025-09-24 05:25:59.320] ubi0:dml_code is mounted. [2025-09-24 05:25:59.406] RTNETLINK answers: File exists [2025-09-24 05:25:59.406] ubi2:textures is mounted. [2025-09-24 05:25:59.406] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:25:59.406] ubi1:animations is mounted. [2025-09-24 05:25:59.406] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:25:59.406] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:25:59.406] data.LB_FadeInType0=100 [2025-09-24 05:25:59.406] data.CHLH_FadeInType0=0 [2025-09-24 05:25:59.406] data.WU_FadeInDelay=0 [2025-09-24 05:25:59.406] max_time_out=0 [2025-09-24 05:25:59.406] No splash screen [2025-09-24 05:25:59.406] stop dss Done [2025-09-24 05:25:59.406] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:25:59.406] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:25:59.474] /dev/mem opened. [2025-09-24 05:25:59.474] Memory mapped at address 0xffff998d2000. [2025-09-24 05:25:59.474] Read at address 0x00600018 (0xffff998d2018): 0x00000000 [2025-09-24 05:25:59.474] Write at address 0x00600018 (0xffff998d2018): 0x00400040, readback 0x00400040 [2025-09-24 05:25:59.516] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:25:59.516] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:25:59.676] Loaded PowerVR consumer services. [2025-09-24 05:25:59.708] 512+0 records in [2025-09-24 05:25:59.708] 512+0 records out [2025-09-24 05:25:59.740] Waiting data available... [2025-09-24 05:25:59.740] Starting syslogd/klogd: done [2025-09-24 05:25:59.756] DML Start [2025-09-24 05:25:59.883] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:26:00.124] DML res1: 0 [2025-09-24 05:26:00.629] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:26:00.629] Read Success [2025-09-24 05:26:00.629] Verifying certificate... [2025-09-24 05:26:00.853] Verified OK [2025-09-24 05:26:00.868] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:26:02.442] Verified OK [2025-09-24 05:26:02.442] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:26:03.125] Verified OK [2025-09-24 05:26:03.125] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:26:05.795] fs.protected_hardlinks = 1 [2025-09-24 05:26:05.811] fs.protected_symlinks = 1 [2025-09-24 05:26:05.811] kernel.modules_disabled = 1 [2025-09-24 05:26:06.018] [2025-09-24 05:26:06.018] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:26:07.274] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:26:15.054] SBL1:1210.0.1.0 [2025-09-24 05:26:15.102] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:26:16.668] SBL2:1210.0.1.0 [2025-09-24 05:26:16.717] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:26:16.813] j-A [2025-09-24 05:26:24.167] The R5 Autosar Classic is running [2025-09-24 05:26:24.190] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:26:24.190] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:26:24.798] INIT: version 2.96 booting [2025-09-24 05:26:24.910] INIT: Entering runlevel: 5 [2025-09-24 05:26:25.070] mtd24 attached [2025-09-24 05:26:25.086] mtd32 attached [2025-09-24 05:26:25.086] mtd28 attached [2025-09-24 05:26:25.118] ubi0:textures is mounted. [2025-09-24 05:26:25.134] RTNETLINK answers: File exists [2025-09-24 05:26:25.175] ubi1:dml_code is mounted. [2025-09-24 05:26:25.175] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:26:25.175] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:26:25.175] ubi2:animations is mounted. [2025-09-24 05:26:25.175] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:26:25.175] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:26:25.175] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:26:25.197] data.LB_FadeInType0=100 [2025-09-24 05:26:25.197] data.CHLH_FadeInType0=0 [2025-09-24 05:26:25.197] data.WU_FadeInDelay=0 [2025-09-24 05:26:25.197] max_time_out=0 [2025-09-24 05:26:25.197] No splash screen [2025-09-24 05:26:25.197] stop dss Done [2025-09-24 05:26:25.245] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:26:25.282] /dev/mem opened. [2025-09-24 05:26:25.282] Memory mapped at address 0xffff9f693000. [2025-09-24 05:26:25.282] Read at address 0x00600018 (0xffff9f693018): 0x00000000 [2025-09-24 05:26:25.282] Write at address 0x00600018 (0xffff9f693018): 0x00400040, readback 0x00400040 [2025-09-24 05:26:25.282] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:26:25.362] Loaded PowerVR consumer services. [2025-09-24 05:26:25.520] Waiting data available... [2025-09-24 05:26:25.520] 512+0 records in [2025-09-24 05:26:25.520] 512+0 records out [2025-09-24 05:26:25.536] Starting syslogd/klogd: done [2025-09-24 05:26:25.552] DML Start [2025-09-24 05:26:25.759] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:26:25.952] DML res1: 0 [2025-09-24 05:26:26.376] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:26:26.376] Read Success [2025-09-24 05:26:26.376] Verifying certificate... [2025-09-24 05:26:26.600] Verified OK [2025-09-24 05:26:26.616] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:26:28.183] Verified OK [2025-09-24 05:26:28.183] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:26:28.870] Verified OK [2025-09-24 05:26:28.870] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:26:31.680] fs.protected_hardlinks = 1 [2025-09-24 05:26:31.680] fs.protected_symlinks = 1 [2025-09-24 05:26:31.680] kernel.modules_disabled = 1 [2025-09-24 05:26:31.856] [2025-09-24 05:26:31.856] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:26:33.040] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:26:40.862] SBL1:1210.0.1.0 [2025-09-24 05:26:40.893] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:26:42.476] SBL2:1210.0.1.0 [2025-09-24 05:26:42.508] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:26:42.620] j-A [2025-09-24 05:26:49.992] The R5 Autosar Classic is running [2025-09-24 05:26:49.992] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:26:49.992] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:26:50.599] INIT: version 2.96 booting [2025-09-24 05:26:50.711] INIT: Entering runlevel: 5 [2025-09-24 05:26:50.871] mtd28 attached [2025-09-24 05:26:50.871] mtd24 attached [2025-09-24 05:26:50.887] mtd32 attached [2025-09-24 05:26:50.935] ubi0:animations is mounted. [2025-09-24 05:26:50.935] RTNETLINK answers: File exists [2025-09-24 05:26:51.002] ubi2:dml_code is mounted. [2025-09-24 05:26:51.002] ubi1:textures is mounted. [2025-09-24 05:26:51.002] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:26:51.002] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:26:51.002] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:26:51.002] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:26:51.002] data.LB_FadeInType0=100 [2025-09-24 05:26:51.002] data.CHLH_FadeInType0=0 [2025-09-24 05:26:51.002] data.WU_FadeInDelay=0 [2025-09-24 05:26:51.002] max_time_out=0 [2025-09-24 05:26:51.002] No splash screen [2025-09-24 05:26:51.002] stop dss Done [2025-09-24 05:26:51.002] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:26:51.087] /dev/mem opened. [2025-09-24 05:26:51.087] Memory mapped at address 0xffff83297000. [2025-09-24 05:26:51.087] Read at address 0x00600018 (0xffff83297018): 0x00000000 [2025-09-24 05:26:51.087] Write at address 0x00600018 (0xffff83297018): 0x00400040, readback 0x00400040 [2025-09-24 05:26:51.120] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:26:51.136] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:26:51.295] Loaded PowerVR consumer services. [2025-09-24 05:26:51.328] 512+0 records in [2025-09-24 05:26:51.328] 512+0 records out [2025-09-24 05:26:51.360] Waiting data available... [2025-09-24 05:26:51.360] Starting syslogd/klogd: done [2025-09-24 05:26:51.376] DML Start [2025-09-24 05:26:51.535] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:26:51.760] DML res1: 0 [2025-09-24 05:26:52.220] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:26:52.220] Read Success [2025-09-24 05:26:52.220] Verifying certificate... [2025-09-24 05:26:52.476] Verified OK [2025-09-24 05:26:52.492] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:26:54.153] Verified OK [2025-09-24 05:26:54.153] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:26:54.678] Verified OK [2025-09-24 05:26:54.678] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:26:57.396] fs.protected_hardlinks = 1 [2025-09-24 05:26:57.396] fs.protected_symlinks = 1 [2025-09-24 05:26:57.412] kernel.modules_disabled = 1 [2025-09-24 05:26:57.604] [2025-09-24 05:26:57.604] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:26:58.849] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:27:06.666] SBL1:1210.0.1.0 [2025-09-24 05:27:06.697] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:27:08.280] SBL2:1210.0.1.0 [2025-09-24 05:27:08.312] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:27:08.425] j-A [2025-09-24 05:27:15.762] The R5 Autosar Classic is running [2025-09-24 05:27:15.787] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:27:15.787] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:27:16.394] INIT: version 2.96 booting [2025-09-24 05:27:16.507] INIT: Entering runlevel: 5 [2025-09-24 05:27:16.666] mtd28 attached [2025-09-24 05:27:16.682] mtd32 attached [2025-09-24 05:27:16.682] mtd24 attached [2025-09-24 05:27:16.731] ubi0:animations is mounted. [2025-09-24 05:27:16.798] RTNETLINK answers: File exists [2025-09-24 05:27:16.798] ubi1:dml_code is mounted. [2025-09-24 05:27:16.798] ubi2:textures is mounted. [2025-09-24 05:27:16.798] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:27:16.798] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:27:16.798] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:27:16.798] data.LB_FadeInType0=100 [2025-09-24 05:27:16.798] data.CHLH_FadeInType0=0 [2025-09-24 05:27:16.798] data.WU_FadeInDelay=0 [2025-09-24 05:27:16.798] max_time_out=0 [2025-09-24 05:27:16.798] No splash screen [2025-09-24 05:27:16.798] stop dss Done [2025-09-24 05:27:16.798] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:27:16.798] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:27:16.869] /dev/mem opened. [2025-09-24 05:27:16.869] Memory mapped at address 0xffff9d946000. [2025-09-24 05:27:16.869] Read at address 0x00600018 (0xffff9d946018): 0x00000000 [2025-09-24 05:27:16.869] Write at address 0x00600018 (0xffff9d946018): 0x00400040, readback 0x00400040 [2025-09-24 05:27:16.901] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:27:16.917] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:27:17.062] Loaded PowerVR consumer services. [2025-09-24 05:27:17.093] 512+0 records in [2025-09-24 05:27:17.093] 512+0 records out [2025-09-24 05:27:17.141] Starting syslogd/klogd: Waiting data available... [2025-09-24 05:27:17.157] done [2025-09-24 05:27:17.157] DML Start [2025-09-24 05:27:17.317] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:27:17.541] DML res1: 0 [2025-09-24 05:27:18.011] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:27:18.011] Read Success [2025-09-24 05:27:18.011] Verifying certificate... [2025-09-24 05:27:18.283] Verified OK [2025-09-24 05:27:18.299] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:27:19.929] Verified OK [2025-09-24 05:27:19.929] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:27:20.560] Verified OK [2025-09-24 05:27:20.560] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:27:23.215] fs.protected_hardlinks = 1 [2025-09-24 05:27:23.231] fs.protected_symlinks = 1 [2025-09-24 05:27:23.231] kernel.modules_disabled = 1 [2025-09-24 05:27:23.439] [2025-09-24 05:27:23.439] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:27:24.655] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:27:32.469] SBL1:1210.0.1.0 [2025-09-24 05:27:32.501] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:27:34.084] SBL2:1210.0.1.0 [2025-09-24 05:27:34.116] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:27:34.227] j-A [2025-09-24 05:27:41.566] The R5 Autosar Classic is running [2025-09-24 05:27:41.591] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:27:41.591] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:27:42.197] INIT: version 2.96 booting [2025-09-24 05:27:42.310] INIT: Entering runlevel: 5 [2025-09-24 05:27:42.470] mtd24 attached [2025-09-24 05:27:42.470] mtd28 attached [2025-09-24 05:27:42.486] mtd32 attached [2025-09-24 05:27:42.518] ubi0:textures is mounted. [2025-09-24 05:27:42.599] ubi1:animations is mounted. [2025-09-24 05:27:42.599] RTNETLINK answers: File exists [2025-09-24 05:27:42.599] ubi2:dml_code is mounted. [2025-09-24 05:27:42.599] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:27:42.599] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:27:42.599] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:27:42.599] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:27:42.599] data.LB_FadeInType0=100 [2025-09-24 05:27:42.599] data.CHLH_FadeInType0=0 [2025-09-24 05:27:42.599] data.WU_FadeInDelay=0 [2025-09-24 05:27:42.599] max_time_out=0 [2025-09-24 05:27:42.599] No splash screen [2025-09-24 05:27:42.599] stop dss Done [2025-09-24 05:27:42.599] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:27:42.647] /dev/mem opened. [2025-09-24 05:27:42.647] Memory mapped at address 0xffffac6c7000. [2025-09-24 05:27:42.689] Read at address 0x00600018 (0xffffac6c7018): 0x00000000 [2025-09-24 05:27:42.689] Write at address 0x00600018 (0xffffac6c7018): 0x00400040, readback 0x00400040 [2025-09-24 05:27:42.689] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:27:42.689] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:27:42.881] Loaded PowerVR consumer services. [2025-09-24 05:27:42.913] 512+0 records in [2025-09-24 05:27:42.913] 512+0 records out [2025-09-24 05:27:42.945] Waiting data available... [2025-09-24 05:27:42.977] Starting syslogd/klogd: done [2025-09-24 05:27:42.992] DML Start [2025-09-24 05:27:43.152] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:27:43.344] DML res1: 0 [2025-09-24 05:27:43.852] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:27:43.852] Read Success [2025-09-24 05:27:43.852] Verifying certificate... [2025-09-24 05:27:44.107] Verified OK [2025-09-24 05:27:44.123] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:27:45.879] Verified OK [2025-09-24 05:27:45.879] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:27:46.455] Verified OK [2025-09-24 05:27:46.455] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:27:48.949] fs.protected_hardlinks = 1 [2025-09-24 05:27:48.965] fs.protected_symlinks = 1 [2025-09-24 05:27:48.965] kernel.modules_disabled = 1 [2025-09-24 05:27:49.157] [2025-09-24 05:27:49.157] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:27:50.496] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:27:58.256] SBL1:1210.0.1.0 [2025-09-24 05:27:58.304] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:27:59.870] SBL2:1210.0.1.0 [2025-09-24 05:27:59.902] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:28:00.014] j-A [2025-09-24 05:28:07.388] The R5 Autosar Classic is running [2025-09-24 05:28:07.388] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:28:07.388] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:28:07.996] INIT: version 2.96 booting [2025-09-24 05:28:08.107] INIT: Entering runlevel: 5 [2025-09-24 05:28:08.252] mtd24 attached [2025-09-24 05:28:08.268] mtd28 attached [2025-09-24 05:28:08.284] mtd32 attached [2025-09-24 05:28:08.316] ubi0:textures is mounted. [2025-09-24 05:28:08.332] RTNETLINK answers: File exists [2025-09-24 05:28:08.389] ubi1:animations is mounted. [2025-09-24 05:28:08.389] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:28:08.389] ubi2:dml_code is mounted. [2025-09-24 05:28:08.389] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:28:08.389] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:28:08.389] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:28:08.389] data.LB_FadeInType0=100 [2025-09-24 05:28:08.389] data.CHLH_FadeInType0=0 [2025-09-24 05:28:08.389] data.WU_FadeInDelay=0 [2025-09-24 05:28:08.389] max_time_out=0 [2025-09-24 05:28:08.389] No splash screen [2025-09-24 05:28:08.389] stop dss Done [2025-09-24 05:28:08.389] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:28:08.459] /dev/mem opened. [2025-09-24 05:28:08.459] Memory mapped at address 0xffffb0c1d000. [2025-09-24 05:28:08.459] Read at address 0x00600018 (0xffffb0c1d018): 0x00000000 [2025-09-24 05:28:08.459] Write at address 0x00600018 (0xffffb0c1d018): 0x00400040, readback 0x00400040 [2025-09-24 05:28:08.459] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:28:08.459] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:28:08.587] Loaded PowerVR consumer services. [2025-09-24 05:28:08.730] Waiting data available... [2025-09-24 05:28:08.730] 512+0 records in [2025-09-24 05:28:08.730] 512+0 records out [2025-09-24 05:28:08.761] Starting syslogd/klogd: done [2025-09-24 05:28:08.793] DML Start [2025-09-24 05:28:08.970] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:28:09.194] DML res1: 0 [2025-09-24 05:28:09.609] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:28:09.609] Read Success [2025-09-24 05:28:09.625] Verifying certificate... [2025-09-24 05:28:09.897] Verified OK [2025-09-24 05:28:09.913] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:28:11.539] Verified OK [2025-09-24 05:28:11.539] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:28:12.080] Verified OK [2025-09-24 05:28:12.080] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:28:14.766] fs.protected_hardlinks = 1 [2025-09-24 05:28:14.795] fs.protected_symlinks = 1 [2025-09-24 05:28:14.795] kernel.modules_disabled = 1 [2025-09-24 05:28:14.987] [2025-09-24 05:28:14.987] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:28:16.313] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:28:24.051] SBL1:1210.0.1.0 [2025-09-24 05:28:24.099] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:28:25.666] SBL2:1210.0.1.0 [2025-09-24 05:28:25.698] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:28:25.809] j-A [2025-09-24 05:28:33.185] The R5 Autosar Classic is running [2025-09-24 05:28:33.185] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:28:33.185] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:28:33.792] INIT: version 2.96 booting [2025-09-24 05:28:33.905] INIT: Entering runlevel: 5 [2025-09-24 05:28:34.064] mtd28 attached [2025-09-24 05:28:34.080] mtd32 attached [2025-09-24 05:28:34.080] mtd24 attached [2025-09-24 05:28:34.128] ubi0:animations is mounted. [2025-09-24 05:28:34.128] RTNETLINK answers: File exists [2025-09-24 05:28:34.189] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:28:34.189] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:28:34.189] ubi2:textures is mounted. [2025-09-24 05:28:34.189] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:28:34.189] ubi1:dml_code is mounted. [2025-09-24 05:28:34.189] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:28:34.189] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:28:34.189] data.LB_FadeInType0=100 [2025-09-24 05:28:34.189] data.CHLH_FadeInType0=0 [2025-09-24 05:28:34.189] data.WU_FadeInDelay=0 [2025-09-24 05:28:34.189] max_time_out=0 [2025-09-24 05:28:34.189] No splash screen [2025-09-24 05:28:34.189] stop dss Done [2025-09-24 05:28:34.221] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:28:34.259] /dev/mem opened. [2025-09-24 05:28:34.259] Memory mapped at address 0xffffa3f7f000. [2025-09-24 05:28:34.259] Read at address 0x00600018 (0xffffa3f7f018): 0x00000000 [2025-09-24 05:28:34.259] Write at address 0x00600018 (0xffffa3f7f018): 0x00400040, readback 0x00400040 [2025-09-24 05:28:34.259] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:28:34.339] Loaded PowerVR consumer services. [2025-09-24 05:28:34.510] Waiting data available... [2025-09-24 05:28:34.510] 512+0 records in [2025-09-24 05:28:34.510] 512+0 records out [2025-09-24 05:28:34.542] Starting syslogd/klogd: done [2025-09-24 05:28:34.558] DML Start [2025-09-24 05:28:34.718] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:28:34.990] DML res1: 0 [2025-09-24 05:28:35.357] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:28:35.378] Read Success [2025-09-24 05:28:35.378] Verifying certificate... [2025-09-24 05:28:35.618] Verified OK [2025-09-24 05:28:35.618] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:28:37.265] Verified OK [2025-09-24 05:28:37.265] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:28:37.904] Verified OK [2025-09-24 05:28:37.904] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:28:40.478] fs.protected_hardlinks = 1 [2025-09-24 05:28:40.478] fs.protected_symlinks = 1 [2025-09-24 05:28:40.494] kernel.modules_disabled = 1 [2025-09-24 05:28:40.670] [2025-09-24 05:28:40.670] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:28:42.105] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:28:49.870] SBL1:1210.0.1.0 [2025-09-24 05:28:49.902] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:28:51.485] SBL2:1210.0.1.0 [2025-09-24 05:28:51.516] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:28:51.628] j-A [2025-09-24 05:28:59.001] The R5 Autosar Classic is running [2025-09-24 05:28:59.001] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:28:59.001] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:28:59.608] INIT: version 2.96 booting [2025-09-24 05:28:59.720] INIT: Entering runlevel: 5 [2025-09-24 05:28:59.880] mtd24 attached [2025-09-24 05:28:59.880] mtd28 attached [2025-09-24 05:28:59.912] mtd32 attached [2025-09-24 05:28:59.928] ubi0:textures is mounted. [2025-09-24 05:28:59.944] ubi1:animations is mounted. [2025-09-24 05:29:00.005] RTNETLINK answers: File exists [2025-09-24 05:29:00.005] ubi2:dml_code is mounted. [2025-09-24 05:29:00.005] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:29:00.005] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:29:00.005] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:29:00.005] data.LB_FadeInType0=100 [2025-09-24 05:29:00.005] data.CHLH_FadeInType0=0 [2025-09-24 05:29:00.005] data.WU_FadeInDelay=0 [2025-09-24 05:29:00.005] max_time_out=0 [2025-09-24 05:29:00.005] No splash screen [2025-09-24 05:29:00.005] stop dss Done [2025-09-24 05:29:00.005] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:29:00.005] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:29:00.053] /dev/mem opened. [2025-09-24 05:29:00.053] Memory mapped at address 0xffff8b898000. [2025-09-24 05:29:00.079] Read at address 0x00600018 (0xffff8b898018): 0x00000000 [2025-09-24 05:29:00.079] Write at address 0x00600018 (0xffff8b898018): 0x00400040, readback 0x00400040 [2025-09-24 05:29:00.095] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:29:00.111] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:29:00.239] Loaded PowerVR consumer services. [2025-09-24 05:29:00.349] Waiting data available... [2025-09-24 05:29:00.349] 512+0 records in [2025-09-24 05:29:00.349] 512+0 records out [2025-09-24 05:29:00.380] Starting syslogd/klogd: done [2025-09-24 05:29:00.396] DML Start [2025-09-24 05:29:00.557] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:29:00.780] DML res1: 0 [2025-09-24 05:29:01.212] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:29:01.233] Read Success [2025-09-24 05:29:01.233] Verifying certificate... [2025-09-24 05:29:01.473] Verified OK [2025-09-24 05:29:01.489] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:29:03.119] Verified OK [2025-09-24 05:29:03.119] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:29:03.756] Verified OK [2025-09-24 05:29:03.756] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:29:06.409] fs.protected_hardlinks = 1 [2025-09-24 05:29:06.425] fs.protected_symlinks = 1 [2025-09-24 05:29:06.425] kernel.modules_disabled = 1 [2025-09-24 05:29:06.617] [2025-09-24 05:29:06.617] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:29:07.901] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:29:15.653] SBL1:1210.0.1.0 [2025-09-24 05:29:15.701] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:29:17.268] SBL2:1210.0.1.0 [2025-09-24 05:29:17.316] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:29:17.412] j-A [2025-09-24 05:29:24.768] The R5 Autosar Classic is running [2025-09-24 05:29:24.768] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:29:24.789] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:29:25.397] INIT: version 2.96 booting [2025-09-24 05:29:25.508] INIT: Entering runlevel: 5 [2025-09-24 05:29:25.653] mtd28 attached [2025-09-24 05:29:25.668] mtd24 attached [2025-09-24 05:29:25.684] mtd32 attached [2025-09-24 05:29:25.716] ubi0:animations is mounted. [2025-09-24 05:29:25.732] ubi1:textures is mounted. [2025-09-24 05:29:25.732] RTNETLINK answers: File exists [2025-09-24 05:29:25.790] ubi2:dml_code is mounted. [2025-09-24 05:29:25.790] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:29:25.790] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:29:25.790] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:29:25.790] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:29:25.790] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:29:25.790] data.LB_FadeInType0=100 [2025-09-24 05:29:25.790] data.CHLH_FadeInType0=0 [2025-09-24 05:29:25.790] data.WU_FadeInDelay=0 [2025-09-24 05:29:25.790] max_time_out=0 [2025-09-24 05:29:25.790] No splash screen [2025-09-24 05:29:25.790] stop dss Done [2025-09-24 05:29:25.822] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:29:25.838] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:29:25.874] /dev/mem opened. [2025-09-24 05:29:25.874] Memory mapped at address 0xffff82736000. [2025-09-24 05:29:25.874] Read at address 0x00600018 (0xffff82736018): 0x00000000 [2025-09-24 05:29:25.874] Write at address 0x00600018 (0xffff82736018): 0x00400040, readback 0x00400040 [2025-09-24 05:29:26.065] Loaded PowerVR consumer services. [2025-09-24 05:29:26.127] Waiting data available... [2025-09-24 05:29:26.127] 512+0 records in [2025-09-24 05:29:26.127] 512+0 records out [2025-09-24 05:29:26.143] Starting syslogd/klogd: done [2025-09-24 05:29:26.159] DML Start [2025-09-24 05:29:26.350] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:29:26.574] DML res1: 0 [2025-09-24 05:29:27.102] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:29:27.122] Read Success [2025-09-24 05:29:27.122] Verifying certificate... [2025-09-24 05:29:27.378] Verified OK [2025-09-24 05:29:27.410] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:29:29.069] Verified OK [2025-09-24 05:29:29.069] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:29:29.644] Verified OK [2025-09-24 05:29:29.644] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:29:32.314] fs.protected_hardlinks = 1 [2025-09-24 05:29:32.330] fs.protected_symlinks = 1 [2025-09-24 05:29:32.330] kernel.modules_disabled = 1 [2025-09-24 05:29:32.522] [2025-09-24 05:29:32.522] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:29:33.641] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:29:41.475] SBL1:1210.0.1.0 [2025-09-24 05:29:41.523] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:29:43.090] SBL2:1210.0.1.0 [2025-09-24 05:29:43.122] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:29:43.233] j-A [2025-09-24 05:29:50.606] The R5 Autosar Classic is running [2025-09-24 05:29:50.606] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:29:50.606] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:29:51.214] INIT: version 2.96 booting [2025-09-24 05:29:51.326] INIT: Entering runlevel: 5 [2025-09-24 05:29:51.485] mtd32 attached [2025-09-24 05:29:51.485] mtd24 attached [2025-09-24 05:29:51.485] mtd28 attached [2025-09-24 05:29:51.534] ubi0:dml_code is mounted. [2025-09-24 05:29:51.550] RTNETLINK answers: File exists [2025-09-24 05:29:51.550] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:29:51.606] ubi1:textures is mounted. [2025-09-24 05:29:51.606] ubi2:animations is mounted. [2025-09-24 05:29:51.606] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:29:51.606] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:29:51.606] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:29:51.606] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:29:51.606] data.LB_FadeInType0=100 [2025-09-24 05:29:51.606] data.CHLH_FadeInType0=0 [2025-09-24 05:29:51.606] data.WU_FadeInDelay=0 [2025-09-24 05:29:51.606] max_time_out=0 [2025-09-24 05:29:51.606] No splash screen [2025-09-24 05:29:51.606] stop dss Done [2025-09-24 05:29:51.637] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:29:51.653] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:29:51.688] /dev/mem opened. [2025-09-24 05:29:51.688] Memory mapped at address 0xffffb9626000. [2025-09-24 05:29:51.688] Read at address 0x00600018 (0xffffb9626018): 0x00000000 [2025-09-24 05:29:51.688] Write at address 0x00600018 (0xffffb9626018): 0x00400040, readback 0x00400040 [2025-09-24 05:29:51.753] Loaded PowerVR consumer services. [2025-09-24 05:29:51.912] Waiting data available... [2025-09-24 05:29:51.928] 512+0 records in [2025-09-24 05:29:51.928] 512+0 records out [2025-09-24 05:29:51.961] Starting syslogd/klogd: done [2025-09-24 05:29:51.993] DML Start [2025-09-24 05:29:52.168] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:29:52.360] DML res1: 0 [2025-09-24 05:29:52.866] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:29:52.866] Read Success [2025-09-24 05:29:52.866] Verifying certificate... [2025-09-24 05:29:53.089] Verified OK [2025-09-24 05:29:53.105] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:29:54.666] Verified OK [2025-09-24 05:29:54.666] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:29:55.296] Verified OK [2025-09-24 05:29:55.296] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:29:58.046] fs.protected_hardlinks = 1 [2025-09-24 05:29:58.046] fs.protected_symlinks = 1 [2025-09-24 05:29:58.046] kernel.modules_disabled = 1 [2025-09-24 05:29:58.254] [2025-09-24 05:29:58.254] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:29:59.474] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:30:07.278] SBL1:1210.0.1.0 [2025-09-24 05:30:07.310] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:30:08.892] SBL2:1210.0.1.0 [2025-09-24 05:30:08.924] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:30:09.037] j-A [2025-09-24 05:30:16.407] The R5 Autosar Classic is running [2025-09-24 05:30:16.407] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:30:16.407] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:30:17.015] INIT: version 2.96 booting [2025-09-24 05:30:17.111] INIT: Entering runlevel: 5 [2025-09-24 05:30:17.272] mtd24 attached [2025-09-24 05:30:17.287] mtd28 attached [2025-09-24 05:30:17.303] mtd32 attached [2025-09-24 05:30:17.319] ubi0:textures is mounted. [2025-09-24 05:30:17.398] RTNETLINK answers: File exists [2025-09-24 05:30:17.398] ubi1:animations is mounted. [2025-09-24 05:30:17.398] ubi2:dml_code is mounted. [2025-09-24 05:30:17.398] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:30:17.398] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:30:17.398] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:30:17.398] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:30:17.398] data.LB_FadeInType0=100 [2025-09-24 05:30:17.398] data.CHLH_FadeInType0=0 [2025-09-24 05:30:17.398] data.WU_FadeInDelay=0 [2025-09-24 05:30:17.398] max_time_out=0 [2025-09-24 05:30:17.398] No splash screen [2025-09-24 05:30:17.398] stop dss Done [2025-09-24 05:30:17.398] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:30:17.446] /dev/mem opened. [2025-09-24 05:30:17.446] Memory mapped at address 0xffff88a59000. [2025-09-24 05:30:17.446] Read at address 0x00600018 (0xffff88a59018): 0x00000000 [2025-09-24 05:30:17.472] Write at address 0x00600018 (0xffff88a59018): 0x00400040, readback 0x00400040 [2025-09-24 05:30:17.488] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:30:17.504] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:30:17.680] Loaded PowerVR consumer services. [2025-09-24 05:30:17.712] Waiting data available... [2025-09-24 05:30:17.728] 512+0 records in [2025-09-24 05:30:17.728] 512+0 records out [2025-09-24 05:30:17.776] Starting syslogd/klogd: done [2025-09-24 05:30:17.792] DML Start [2025-09-24 05:30:17.968] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:30:18.208] DML res1: 0 [2025-09-24 05:30:18.621] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:30:18.621] Read Success [2025-09-24 05:30:18.621] Verifying certificate... [2025-09-24 05:30:18.845] Verified OK [2025-09-24 05:30:18.861] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:30:20.582] Verified OK [2025-09-24 05:30:20.582] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:30:21.236] Verified OK [2025-09-24 05:30:21.236] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:30:23.826] fs.protected_hardlinks = 1 [2025-09-24 05:30:23.842] fs.protected_symlinks = 1 [2025-09-24 05:30:23.842] kernel.modules_disabled = 1 [2025-09-24 05:30:24.034] [2025-09-24 05:30:24.034] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:30:25.287] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:30:33.093] SBL1:1210.0.1.0 [2025-09-24 05:30:33.125] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:30:34.707] SBL2:1210.0.1.0 [2025-09-24 05:30:34.739] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:30:34.851] j-A [2025-09-24 05:30:42.224] The R5 Autosar Classic is running [2025-09-24 05:30:42.224] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:30:42.224] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:30:42.831] INIT: version 2.96 booting [2025-09-24 05:30:42.943] INIT: Entering runlevel: 5 [2025-09-24 05:30:43.103] mtd32 attached [2025-09-24 05:30:43.103] mtd24 attached [2025-09-24 05:30:43.119] mtd28 attached [2025-09-24 05:30:43.151] ubi0:dml_code is mounted. [2025-09-24 05:30:43.167] ubi2:animations is mounted. [2025-09-24 05:30:43.230] RTNETLINK answers: File exists [2025-09-24 05:30:43.230] ubi1:textures is mounted. [2025-09-24 05:30:43.230] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:30:43.230] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:30:43.230] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:30:43.230] data.LB_FadeInType0=100 [2025-09-24 05:30:43.230] data.CHLH_FadeInType0=0 [2025-09-24 05:30:43.230] data.WU_FadeInDelay=0 [2025-09-24 05:30:43.230] max_time_out=0 [2025-09-24 05:30:43.230] No splash screen [2025-09-24 05:30:43.230] stop dss Done [2025-09-24 05:30:43.230] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:30:43.230] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:30:43.310] /dev/mem opened. [2025-09-24 05:30:43.310] Memory mapped at address 0xffffa489c000. [2025-09-24 05:30:43.310] Read at address 0x00600018 (0xffffa489c018): 0x00000000 [2025-09-24 05:30:43.310] Write at address 0x00600018 (0xffffa489c018): 0x00400040, readback 0x00400040 [2025-09-24 05:30:43.310] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:30:43.326] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:30:43.502] Loaded PowerVR consumer services. [2025-09-24 05:30:43.560] Waiting data available... [2025-09-24 05:30:43.560] 512+0 records in [2025-09-24 05:30:43.560] 512+0 records out [2025-09-24 05:30:43.592] Starting syslogd/klogd: done [2025-09-24 05:30:43.608] DML Start [2025-09-24 05:30:43.785] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:30:44.024] DML res1: 0 [2025-09-24 05:30:44.440] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:30:44.440] Read Success [2025-09-24 05:30:44.456] Verifying certificate... [2025-09-24 05:30:44.680] Verified OK [2025-09-24 05:30:44.696] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:30:46.339] Verified OK [2025-09-24 05:30:46.339] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:30:46.959] Verified OK [2025-09-24 05:30:46.959] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:30:49.677] fs.protected_hardlinks = 1 [2025-09-24 05:30:49.693] fs.protected_symlinks = 1 [2025-09-24 05:30:49.693] kernel.modules_disabled = 1 [2025-09-24 05:30:49.885] [2025-09-24 05:30:49.885] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:30:51.063] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:30:58.902] SBL1:1210.0.1.0 [2025-09-24 05:30:58.950] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:31:00.517] SBL2:1210.0.1.0 [2025-09-24 05:31:00.565] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:31:00.660] j-A [2025-09-24 05:31:08.015] The R5 Autosar Classic is running [2025-09-24 05:31:08.039] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:31:08.039] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:31:08.646] INIT: version 2.96 booting [2025-09-24 05:31:08.759] INIT: Entering runlevel: 5 [2025-09-24 05:31:08.902] mtd24 attached [2025-09-24 05:31:08.918] mtd28 attached [2025-09-24 05:31:08.934] mtd32 attached [2025-09-24 05:31:08.967] ubi0:textures is mounted. [2025-09-24 05:31:09.037] RTNETLINK answers: File exists [2025-09-24 05:31:09.037] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:31:09.037] ubi1:animations is mounted. [2025-09-24 05:31:09.037] ubi2:dml_code is mounted. [2025-09-24 05:31:09.037] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:31:09.037] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:31:09.037] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:31:09.037] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:31:09.037] data.LB_FadeInType0=100 [2025-09-24 05:31:09.037] data.CHLH_FadeInType0=0 [2025-09-24 05:31:09.037] data.WU_FadeInDelay=0 [2025-09-24 05:31:09.037] max_time_out=0 [2025-09-24 05:31:09.037] No splash screen [2025-09-24 05:31:09.037] stop dss Done [2025-09-24 05:31:09.085] /dev/mem opened. [2025-09-24 05:31:09.085] Memory mapped at address 0xffff95ed4000. [2025-09-24 05:31:09.116] Read at address 0x00600018 (0xffff95ed4018): 0x00000000 [2025-09-24 05:31:09.116] Write at address 0x00600018 (0xffff95ed4018): 0x00400040, readback 0x00400040 [2025-09-24 05:31:09.116] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:31:09.116] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:31:09.196] Loaded PowerVR consumer services. [2025-09-24 05:31:09.341] 512+0 records in [2025-09-24 05:31:09.341] 512+0 records out [2025-09-24 05:31:09.357] Waiting data available... [2025-09-24 05:31:09.388] Starting syslogd/klogd: done [2025-09-24 05:31:09.404] DML Start [2025-09-24 05:31:09.596] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:31:09.868] DML res1: 0 [2025-09-24 05:31:10.209] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:31:10.210] Read Success [2025-09-24 05:31:10.210] Verifying certificate... [2025-09-24 05:31:10.465] Verified OK [2025-09-24 05:31:10.481] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:31:12.289] Verified OK [2025-09-24 05:31:12.305] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:31:12.873] Verified OK [2025-09-24 05:31:12.873] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:31:15.399] fs.protected_hardlinks = 1 [2025-09-24 05:31:15.399] fs.protected_symlinks = 1 [2025-09-24 05:31:15.415] kernel.modules_disabled = 1 [2025-09-24 05:31:15.607] [2025-09-24 05:31:15.607] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:31:16.909] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:31:24.716] SBL1:1210.0.1.0 [2025-09-24 05:31:24.764] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:31:26.331] SBL2:1210.0.1.0 [2025-09-24 05:31:26.379] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:31:26.475] j-A [2025-09-24 05:31:33.828] The R5 Autosar Classic is running [2025-09-24 05:31:33.849] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:31:33.849] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:31:34.457] INIT: version 2.96 booting [2025-09-24 05:31:34.569] INIT: Entering runlevel: 5 [2025-09-24 05:31:34.729] mtd24 attached [2025-09-24 05:31:34.745] mtd28 attached [2025-09-24 05:31:34.745] mtd32 attached [2025-09-24 05:31:34.777] ubi0:textures is mounted. [2025-09-24 05:31:34.793] ubi1:animations is mounted. [2025-09-24 05:31:34.834] RTNETLINK answers: File exists [2025-09-24 05:31:34.834] ubi2:dml_code is mounted. [2025-09-24 05:31:34.834] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:31:34.834] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:31:34.834] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:31:34.834] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:31:34.834] data.LB_FadeInType0=100 [2025-09-24 05:31:34.860] data.CHLH_FadeInType0=0 [2025-09-24 05:31:34.860] data.WU_FadeInDelay=0 [2025-09-24 05:31:34.860] max_time_out=0 [2025-09-24 05:31:34.860] No splash screen [2025-09-24 05:31:34.860] stop dss Done [2025-09-24 05:31:34.860] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:31:34.934] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:31:34.934] /dev/mem opened. [2025-09-24 05:31:34.934] Memory mapped at address 0xffffad04d000. [2025-09-24 05:31:34.934] Read at address 0x00600018 (0xffffad04d018): 0x00000000 [2025-09-24 05:31:34.934] Write at address 0x00600018 (0xffffad04d018): 0x00400040, readback 0x00400040 [2025-09-24 05:31:34.934] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:31:35.078] Loaded PowerVR consumer services. [2025-09-24 05:31:35.205] Waiting data available... [2025-09-24 05:31:35.205] 512+0 records in [2025-09-24 05:31:35.205] 512+0 records out [2025-09-24 05:31:35.237] Starting syslogd/klogd: done [2025-09-24 05:31:35.253] DML Start [2025-09-24 05:31:35.429] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:31:35.685] DML res1: 0 [2025-09-24 05:31:36.107] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:31:36.107] Read Success [2025-09-24 05:31:36.107] Verifying certificate... [2025-09-24 05:31:36.347] Verified OK [2025-09-24 05:31:36.347] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:31:38.068] Verified OK [2025-09-24 05:31:38.068] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:31:38.651] Verified OK [2025-09-24 05:31:38.651] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:31:41.210] fs.protected_hardlinks = 1 [2025-09-24 05:31:41.210] fs.protected_symlinks = 1 [2025-09-24 05:31:41.225] kernel.modules_disabled = 1 [2025-09-24 05:31:41.418] [2025-09-24 05:31:41.418] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:31:42.772] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:31:50.537] SBL1:1210.0.1.0 [2025-09-24 05:31:50.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:31:52.151] SBL2:1210.0.1.0 [2025-09-24 05:31:52.183] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:31:52.296] j-A [2025-09-24 05:31:59.649] The R5 Autosar Classic is running [2025-09-24 05:31:59.649] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:31:59.670] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:32:00.278] INIT: version 2.96 booting [2025-09-24 05:32:00.390] INIT: Entering runlevel: 5 [2025-09-24 05:32:00.550] mtd32 attached [2025-09-24 05:32:00.550] mtd24 attached [2025-09-24 05:32:00.566] mtd28 attached [2025-09-24 05:32:00.598] ubi0:dml_code is mounted. [2025-09-24 05:32:00.614] RTNETLINK answers: File exists [2025-09-24 05:32:00.670] ubi2:animations is mounted. [2025-09-24 05:32:00.670] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:32:00.670] ubi1:textures is mounted. [2025-09-24 05:32:00.670] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:32:00.670] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:32:00.670] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:32:00.670] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:32:00.670] data.LB_FadeInType0=100 [2025-09-24 05:32:00.670] data.CHLH_FadeInType0=0 [2025-09-24 05:32:00.670] data.WU_FadeInDelay=0 [2025-09-24 05:32:00.670] max_time_out=0 [2025-09-24 05:32:00.670] No splash screen [2025-09-24 05:32:00.670] stop dss Done [2025-09-24 05:32:00.715] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:32:00.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:32:00.751] /dev/mem opened. [2025-09-24 05:32:00.751] Memory mapped at address 0xffff8792a000. [2025-09-24 05:32:00.751] Read at address 0x00600018 (0xffff8792a018): 0x00000000 [2025-09-24 05:32:00.751] Write at address 0x00600018 (0xffff8792a018): 0x00400040, readback 0x00400040 [2025-09-24 05:32:00.959] Loaded PowerVR consumer services. [2025-09-24 05:32:00.991] Waiting data available... [2025-09-24 05:32:00.991] 512+0 records in [2025-09-24 05:32:00.991] 512+0 records out [2025-09-24 05:32:01.038] Starting syslogd/klogd: done [2025-09-24 05:32:01.054] DML Start [2025-09-24 05:32:01.231] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:32:01.438] DML res1: 0 [2025-09-24 05:32:01.861] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:32:01.861] Read Success [2025-09-24 05:32:01.861] Verifying certificate... [2025-09-24 05:32:02.101] Verified OK [2025-09-24 05:32:02.117] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:32:03.662] Verified OK [2025-09-24 05:32:03.662] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:32:04.222] Verified OK [2025-09-24 05:32:04.222] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:32:07.084] fs.protected_hardlinks = 1 [2025-09-24 05:32:07.115] fs.protected_symlinks = 1 [2025-09-24 05:32:07.115] kernel.modules_disabled = 1 [2025-09-24 05:32:07.306] [2025-09-24 05:32:07.306] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:32:08.536] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:32:16.342] SBL1:1210.0.1.0 [2025-09-24 05:32:16.390] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:32:17.957] SBL2:1210.0.1.0 [2025-09-24 05:32:18.005] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:32:18.100] j-A [2025-09-24 05:32:25.455] The R5 Autosar Classic is running [2025-09-24 05:32:25.477] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:32:25.477] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:32:26.084] INIT: version 2.96 booting [2025-09-24 05:32:26.196] INIT: Entering runlevel: 5 [2025-09-24 05:32:26.356] mtd28 attached [2025-09-24 05:32:26.372] mtd32 attached [2025-09-24 05:32:26.388] mtd24 attached [2025-09-24 05:32:26.388] ubi0:animations is mounted. [2025-09-24 05:32:26.419] ubi1:dml_code is mounted. [2025-09-24 05:32:26.419] RTNETLINK answers: File exists [2025-09-24 05:32:26.477] ubi2:textures is mounted. [2025-09-24 05:32:26.477] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:32:26.477] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:32:26.477] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:32:26.477] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:32:26.477] data.LB_FadeInType0=100 [2025-09-24 05:32:26.477] data.CHLH_FadeInType0=0 [2025-09-24 05:32:26.477] data.WU_FadeInDelay=0 [2025-09-24 05:32:26.477] max_time_out=0 [2025-09-24 05:32:26.477] No splash screen [2025-09-24 05:32:26.477] stop dss Done [2025-09-24 05:32:26.477] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:32:26.545] /dev/mem opened. [2025-09-24 05:32:26.545] Memory mapped at address 0xffff993f4000. [2025-09-24 05:32:26.545] Read at address 0x00600018 (0xffff993f4018): 0x00000000 [2025-09-24 05:32:26.545] Write at address 0x00600018 (0xffff993f4018): 0x00400040, readback 0x00400040 [2025-09-24 05:32:26.561] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:32:26.577] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:32:26.657] Loaded PowerVR consumer services. [2025-09-24 05:32:26.808] Waiting data available... [2025-09-24 05:32:26.808] 512+0 records in [2025-09-24 05:32:26.808] 512+0 records out [2025-09-24 05:32:26.840] Starting syslogd/klogd: done [2025-09-24 05:32:26.856] DML Start [2025-09-24 05:32:27.032] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:32:27.240] DML res1: 0 [2025-09-24 05:32:27.748] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:32:27.748] Read Success [2025-09-24 05:32:27.748] Verifying certificate... [2025-09-24 05:32:27.988] Verified OK [2025-09-24 05:32:28.004] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:32:29.634] Verified OK [2025-09-24 05:32:29.634] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:32:30.270] Verified OK [2025-09-24 05:32:30.270] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:32:32.797] fs.protected_hardlinks = 1 [2025-09-24 05:32:32.813] fs.protected_symlinks = 1 [2025-09-24 05:32:32.813] kernel.modules_disabled = 1 [2025-09-24 05:32:33.021] [2025-09-24 05:32:33.021] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:32:34.359] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:32:42.153] SBL1:1210.0.1.0 [2025-09-24 05:32:42.201] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:32:43.767] SBL2:1210.0.1.0 [2025-09-24 05:32:43.815] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:32:43.912] j-A [2025-09-24 05:32:51.266] The R5 Autosar Classic is running [2025-09-24 05:32:51.287] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:32:51.287] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:32:51.894] INIT: version 2.96 booting [2025-09-24 05:32:52.007] INIT: Entering runlevel: 5 [2025-09-24 05:32:52.166] mtd32 attached [2025-09-24 05:32:52.166] mtd24 attached [2025-09-24 05:32:52.182] mtd28 attached [2025-09-24 05:32:52.287] RTNETLINK answers: File exists [2025-09-24 05:32:52.287] ubi0:dml_code is mounted. [2025-09-24 05:32:52.287] ubi1:textures is mounted. [2025-09-24 05:32:52.287] ubi2:animations is mounted. [2025-09-24 05:32:52.287] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:32:52.287] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:32:52.287] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:32:52.287] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:32:52.287] data.LB_FadeInType0=100 [2025-09-24 05:32:52.287] data.CHLH_FadeInType0=0 [2025-09-24 05:32:52.287] data.WU_FadeInDelay=0 [2025-09-24 05:32:52.287] max_time_out=0 [2025-09-24 05:32:52.287] No splash screen [2025-09-24 05:32:52.287] stop dss Done [2025-09-24 05:32:52.287] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:32:52.355] /dev/mem opened. [2025-09-24 05:32:52.355] Memory mapped at address 0xffffaeb1a000. [2025-09-24 05:32:52.355] Read at address 0x00600018 (0xffffaeb1a018): 0x00000000 [2025-09-24 05:32:52.355] Write at address 0x00600018 (0xffffaeb1a018): 0x00400040, readback 0x00400040 [2025-09-24 05:32:52.371] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:32:52.395] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:32:52.459] Loaded PowerVR consumer services. [2025-09-24 05:32:52.615] 512+0 records in [2025-09-24 05:32:52.615] 512+0 records out [2025-09-24 05:32:52.615] Waiting data available... [2025-09-24 05:32:52.631] Starting syslogd/klogd: done [2025-09-24 05:32:52.648] DML Start [2025-09-24 05:32:52.855] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:32:53.063] DML res1: 0 [2025-09-24 05:32:53.548] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:32:53.548] Read Success [2025-09-24 05:32:53.548] Verifying certificate... [2025-09-24 05:32:53.771] Verified OK [2025-09-24 05:32:53.787] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:32:55.431] Verified OK [2025-09-24 05:32:55.431] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:32:55.985] Verified OK [2025-09-24 05:32:55.985] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:32:58.671] fs.protected_hardlinks = 1 [2025-09-24 05:32:58.671] fs.protected_symlinks = 1 [2025-09-24 05:32:58.687] kernel.modules_disabled = 1 [2025-09-24 05:32:58.862] [2025-09-24 05:32:58.862] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:33:00.156] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:33:07.964] SBL1:1210.0.1.0 [2025-09-24 05:33:08.012] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:33:09.578] SBL2:1210.0.1.0 [2025-09-24 05:33:09.627] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:33:09.723] j-A [2025-09-24 05:33:17.079] The R5 Autosar Classic is running [2025-09-24 05:33:17.100] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:33:17.100] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:33:17.708] INIT: version 2.96 booting [2025-09-24 05:33:17.819] INIT: Entering runlevel: 5 [2025-09-24 05:33:17.979] mtd24 attached [2025-09-24 05:33:17.979] mtd28 attached [2025-09-24 05:33:17.995] mtd32 attached [2025-09-24 05:33:18.043] ubi1:animations is mounted. [2025-09-24 05:33:18.043] RTNETLINK answers: File exists [2025-09-24 05:33:18.069] ubi0:textures is mounted. [2025-09-24 05:33:18.069] ubi2:dml_code is mounted. [2025-09-24 05:33:18.069] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:33:18.110] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:33:18.110] data.LB_FadeInType0=100 [2025-09-24 05:33:18.110] data.CHLH_FadeInType0=0 [2025-09-24 05:33:18.110] data.WU_FadeInDelay=0 [2025-09-24 05:33:18.110] max_time_out=0 [2025-09-24 05:33:18.110] No splash screen [2025-09-24 05:33:18.110] stop dss Done [2025-09-24 05:33:18.110] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:33:18.110] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:33:18.110] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:33:18.167] /dev/mem opened. [2025-09-24 05:33:18.167] Memory mapped at address 0xffffad4b6000. [2025-09-24 05:33:18.167] Read at address 0x00600018 (0xffffad4b6018): 0x00000000 [2025-09-24 05:33:18.167] Write at address 0x00600018 (0xffffad4b6018): 0x00400040, readback 0x00400040 [2025-09-24 05:33:18.193] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:33:18.193] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:33:18.337] Loaded PowerVR consumer services. [2025-09-24 05:33:18.459] Waiting data available... [2025-09-24 05:33:18.459] 512+0 records in [2025-09-24 05:33:18.459] 512+0 records out [2025-09-24 05:33:18.491] Starting syslogd/klogd: done [2025-09-24 05:33:18.507] DML Start [2025-09-24 05:33:18.699] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:33:18.954] DML res1: 0 [2025-09-24 05:33:19.321] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:33:19.321] Read Success [2025-09-24 05:33:19.321] Verifying certificate... [2025-09-24 05:33:19.624] Verified OK [2025-09-24 05:33:19.640] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:33:21.324] Verified OK [2025-09-24 05:33:21.324] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:33:21.900] Verified OK [2025-09-24 05:33:21.900] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:33:24.425] fs.protected_hardlinks = 1 [2025-09-24 05:33:24.441] fs.protected_symlinks = 1 [2025-09-24 05:33:24.441] kernel.modules_disabled = 1 [2025-09-24 05:33:24.649] [2025-09-24 05:33:24.649] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:33:26.020] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:33:33.758] SBL1:1210.0.1.0 [2025-09-24 05:33:33.806] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:33:35.373] SBL2:1210.0.1.0 [2025-09-24 05:33:35.405] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:33:35.517] j-A [2025-09-24 05:33:42.891] The R5 Autosar Classic is running [2025-09-24 05:33:42.891] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:33:42.891] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:33:43.498] INIT: version 2.96 booting [2025-09-24 05:33:43.611] INIT: Entering runlevel: 5 [2025-09-24 05:33:43.754] mtd24 attached [2025-09-24 05:33:43.771] mtd32 attached [2025-09-24 05:33:43.787] mtd28 attached [2025-09-24 05:33:43.892] ubi0:textures is mounted. [2025-09-24 05:33:43.892] RTNETLINK answers: File exists [2025-09-24 05:33:43.892] ubi1:dml_code is mounted. [2025-09-24 05:33:43.892] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:33:43.892] ubi2:animations is mounted. [2025-09-24 05:33:43.892] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:33:43.892] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:33:43.892] data.LB_FadeInType0=100 [2025-09-24 05:33:43.892] data.CHLH_FadeInType0=0 [2025-09-24 05:33:43.892] data.WU_FadeInDelay=0 [2025-09-24 05:33:43.892] max_time_out=0 [2025-09-24 05:33:43.892] No splash screen [2025-09-24 05:33:43.892] stop dss Done [2025-09-24 05:33:43.892] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:33:43.892] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:33:43.966] /dev/mem opened. [2025-09-24 05:33:43.966] Memory mapped at address 0xffffa0053000. [2025-09-24 05:33:43.966] Read at address 0x00600018 (0xffffa0053018): 0x00000000 [2025-09-24 05:33:43.966] Write at address 0x00600018 (0xffffa0053018): 0x00400040, readback 0x00400040 [2025-09-24 05:33:43.966] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:33:43.966] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:33:44.062] Loaded PowerVR consumer services. [2025-09-24 05:33:44.220] Waiting data available... [2025-09-24 05:33:44.220] 512+0 records in [2025-09-24 05:33:44.220] 512+0 records out [2025-09-24 05:33:44.236] Starting syslogd/klogd: done [2025-09-24 05:33:44.252] DML Start [2025-09-24 05:33:44.428] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:33:44.635] DML res1: 0 [2025-09-24 05:33:45.121] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:33:45.121] Read Success [2025-09-24 05:33:45.121] Verifying certificate... [2025-09-24 05:33:45.377] Verified OK [2025-09-24 05:33:45.393] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:33:47.024] Verified OK [2025-09-24 05:33:47.024] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:33:47.679] Verified OK [2025-09-24 05:33:47.679] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:33:50.365] fs.protected_hardlinks = 1 [2025-09-24 05:33:50.380] fs.protected_symlinks = 1 [2025-09-24 05:33:50.380] kernel.modules_disabled = 1 [2025-09-24 05:33:50.572] [2025-09-24 05:33:50.572] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:33:51.745] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:33:59.567] SBL1:1210.0.1.0 [2025-09-24 05:33:59.599] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:34:01.182] SBL2:1210.0.1.0 [2025-09-24 05:34:01.213] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:34:01.325] j-A [2025-09-24 05:34:08.698] The R5 Autosar Classic is running [2025-09-24 05:34:08.698] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:34:08.698] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:34:09.306] INIT: version 2.96 booting [2025-09-24 05:34:09.418] INIT: Entering runlevel: 5 [2025-09-24 05:34:09.562] mtd24 attached [2025-09-24 05:34:09.578] mtd32 attached [2025-09-24 05:34:09.578] mtd28 attached [2025-09-24 05:34:09.626] ubi0:textures is mounted. [2025-09-24 05:34:09.642] RTNETLINK answers: File exists [2025-09-24 05:34:09.642] ubi1:dml_code is mounted. [2025-09-24 05:34:09.700] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:34:09.700] ubi2:animations is mounted. [2025-09-24 05:34:09.700] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:34:09.700] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:34:09.700] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:34:09.700] data.LB_FadeInType0=100 [2025-09-24 05:34:09.700] data.CHLH_FadeInType0=0 [2025-09-24 05:34:09.700] data.WU_FadeInDelay=0 [2025-09-24 05:34:09.700] max_time_out=0 [2025-09-24 05:34:09.700] No splash screen [2025-09-24 05:34:09.700] stop dss Done [2025-09-24 05:34:09.700] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:34:09.780] /dev/mem opened. [2025-09-24 05:34:09.780] Memory mapped at address 0xffff9fd29000. [2025-09-24 05:34:09.780] Read at address 0x00600018 (0xffff9fd29018): 0x00000000 [2025-09-24 05:34:09.780] Write at address 0x00600018 (0xffff9fd29018): 0x00400040, readback 0x00400040 [2025-09-24 05:34:09.780] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:34:09.796] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:34:09.972] Loaded PowerVR consumer services. [2025-09-24 05:34:10.032] Waiting data available... [2025-09-24 05:34:10.032] 512+0 records in [2025-09-24 05:34:10.032] 512+0 records out [2025-09-24 05:34:10.063] Starting syslogd/klogd: done [2025-09-24 05:34:10.095] DML Start [2025-09-24 05:34:10.319] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:34:10.511] DML res1: 0 [2025-09-24 05:34:10.949] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:34:10.949] Read Success [2025-09-24 05:34:10.949] Verifying certificate... [2025-09-24 05:34:11.173] Verified OK [2025-09-24 05:34:11.173] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:34:12.977] Verified OK [2025-09-24 05:34:12.977] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:34:13.547] Verified OK [2025-09-24 05:34:13.547] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:34:16.041] fs.protected_hardlinks = 1 [2025-09-24 05:34:16.057] fs.protected_symlinks = 1 [2025-09-24 05:34:16.057] kernel.modules_disabled = 1 [2025-09-24 05:34:16.248] [2025-09-24 05:34:16.248] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:34:17.576] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:34:25.354] SBL1:1210.0.1.0 [2025-09-24 05:34:25.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:34:26.969] SBL2:1210.0.1.0 [2025-09-24 05:34:27.016] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:34:27.113] j-A [2025-09-24 05:34:34.469] The R5 Autosar Classic is running [2025-09-24 05:34:34.491] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:34:34.491] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:34:35.098] INIT: version 2.96 booting [2025-09-24 05:34:35.210] INIT: Entering runlevel: 5 [2025-09-24 05:34:35.370] mtd24 attached [2025-09-24 05:34:35.370] mtd28 attached [2025-09-24 05:34:35.386] mtd32 attached [2025-09-24 05:34:35.434] ubi0:textures is mounted. [2025-09-24 05:34:35.434] RTNETLINK answers: File exists [2025-09-24 05:34:35.496] ubi1:animations is mounted. [2025-09-24 05:34:35.496] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:34:35.496] ubi2:dml_code is mounted. [2025-09-24 05:34:35.496] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:34:35.496] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:34:35.496] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:34:35.496] data.LB_FadeInType0=100 [2025-09-24 05:34:35.496] data.CHLH_FadeInType0=0 [2025-09-24 05:34:35.496] data.WU_FadeInDelay=0 [2025-09-24 05:34:35.496] max_time_out=0 [2025-09-24 05:34:35.496] No splash screen [2025-09-24 05:34:35.496] stop dss Done [2025-09-24 05:34:35.496] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:34:35.566] /dev/mem opened. [2025-09-24 05:34:35.566] Memory mapped at address 0xffff98421000. [2025-09-24 05:34:35.566] Read at address 0x00600018 (0xffff98421018): 0x00000000 [2025-09-24 05:34:35.566] Write at address 0x00600018 (0xffff98421018): 0x00400040, readback 0x00400040 [2025-09-24 05:34:35.583] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:34:35.615] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:34:35.806] Loaded PowerVR consumer services. [2025-09-24 05:34:35.845] Waiting data available... [2025-09-24 05:34:35.845] 512+0 records in [2025-09-24 05:34:35.845] 512+0 records out [2025-09-24 05:34:35.861] Starting syslogd/klogd: done [2025-09-24 05:34:35.877] DML Start [2025-09-24 05:34:36.037] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:34:36.261] DML res1: 0 [2025-09-24 05:34:36.741] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:34:36.741] Read Success [2025-09-24 05:34:36.757] Verifying certificate... [2025-09-24 05:34:36.996] Verified OK [2025-09-24 05:34:37.012] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:34:38.780] Verified OK [2025-09-24 05:34:38.780] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:34:39.379] Verified OK [2025-09-24 05:34:39.379] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:34:42.001] fs.protected_hardlinks = 1 [2025-09-24 05:34:42.001] fs.protected_symlinks = 1 [2025-09-24 05:34:42.017] kernel.modules_disabled = 1 [2025-09-24 05:34:42.225] [2025-09-24 05:34:42.225] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:34:43.397] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:34:51.159] SBL1:1210.0.1.0 [2025-09-24 05:34:51.207] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:34:52.774] SBL2:1210.0.1.0 [2025-09-24 05:34:52.822] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:34:52.918] j-A [2025-09-24 05:35:00.273] The R5 Autosar Classic is running [2025-09-24 05:35:00.296] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:35:00.296] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:35:00.904] INIT: version 2.96 booting [2025-09-24 05:35:01.016] INIT: Entering runlevel: 5 [2025-09-24 05:35:01.159] mtd24 attached [2025-09-24 05:35:01.175] mtd32 attached [2025-09-24 05:35:01.191] mtd28 attached [2025-09-24 05:35:01.239] ubi0:textures is mounted. [2025-09-24 05:35:01.239] RTNETLINK answers: File exists [2025-09-24 05:35:01.298] ubi1:dml_code is mounted. [2025-09-24 05:35:01.298] ubi2:animations is mounted. [2025-09-24 05:35:01.298] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:35:01.298] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:35:01.298] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:35:01.298] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:35:01.298] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:35:01.298] data.LB_FadeInType0=100 [2025-09-24 05:35:01.298] data.CHLH_FadeInType0=0 [2025-09-24 05:35:01.298] data.WU_FadeInDelay=0 [2025-09-24 05:35:01.298] max_time_out=0 [2025-09-24 05:35:01.298] No splash screen [2025-09-24 05:35:01.298] stop dss Done [2025-09-24 05:35:01.346] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:35:01.384] /dev/mem opened. [2025-09-24 05:35:01.384] Memory mapped at address 0xffffb6eb0000. [2025-09-24 05:35:01.384] Read at address 0x00600018 (0xffffb6eb0018): 0x00000000 [2025-09-24 05:35:01.384] Write at address 0x00600018 (0xffffb6eb0018): 0x00400040, readback 0x00400040 [2025-09-24 05:35:01.384] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:35:01.465] Loaded PowerVR consumer services. [2025-09-24 05:35:01.637] Waiting data available... [2025-09-24 05:35:01.637] 512+0 records in [2025-09-24 05:35:01.637] 512+0 records out [2025-09-24 05:35:01.653] Starting syslogd/klogd: done [2025-09-24 05:35:01.669] DML Start [2025-09-24 05:35:01.797] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:35:02.053] DML res1: 0 [2025-09-24 05:35:02.469] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:35:02.490] Read Success [2025-09-24 05:35:02.490] Verifying certificate... [2025-09-24 05:35:02.761] Verified OK [2025-09-24 05:35:02.777] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:35:04.537] Verified OK [2025-09-24 05:35:04.537] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:35:05.128] Verified OK [2025-09-24 05:35:05.128] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:35:07.684] fs.protected_hardlinks = 1 [2025-09-24 05:35:07.684] fs.protected_symlinks = 1 [2025-09-24 05:35:07.684] kernel.modules_disabled = 1 [2025-09-24 05:35:07.860] [2025-09-24 05:35:07.860] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:35:09.195] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:35:16.961] SBL1:1210.0.1.0 [2025-09-24 05:35:17.009] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:35:18.592] SBL2:1210.0.1.0 [2025-09-24 05:35:18.624] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:35:18.737] j-A [2025-09-24 05:35:26.074] The R5 Autosar Classic is running [2025-09-24 05:35:26.099] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:35:26.099] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:35:26.707] INIT: version 2.96 booting [2025-09-24 05:35:26.820] INIT: Entering runlevel: 5 [2025-09-24 05:35:26.979] mtd24 attached [2025-09-24 05:35:26.979] mtd28 attached [2025-09-24 05:35:26.995] mtd32 attached [2025-09-24 05:35:27.043] RTNETLINK answers: File exists [2025-09-24 05:35:27.108] ubi1:animations is mounted. [2025-09-24 05:35:27.108] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:35:27.108] ubi0:textures is mounted. [2025-09-24 05:35:27.108] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:35:27.108] ubi2:dml_code is mounted. [2025-09-24 05:35:27.108] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:35:27.108] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:35:27.108] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:35:27.108] data.LB_FadeInType0=100 [2025-09-24 05:35:27.108] data.CHLH_FadeInType0=0 [2025-09-24 05:35:27.108] data.WU_FadeInDelay=0 [2025-09-24 05:35:27.108] max_time_out=0 [2025-09-24 05:35:27.108] No splash screen [2025-09-24 05:35:27.108] stop dss Done [2025-09-24 05:35:27.155] /dev/mem opened. [2025-09-24 05:35:27.155] Memory mapped at address 0xffffa141a000. [2025-09-24 05:35:27.187] Read at address 0x00600018 (0xffffa141a018): 0x00000000 [2025-09-24 05:35:27.187] Write at address 0x00600018 (0xffffa141a018): 0x00400040, readback 0x00400040 [2025-09-24 05:35:27.187] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:35:27.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:35:27.427] Loaded PowerVR consumer services. [2025-09-24 05:35:27.443] Waiting data available... [2025-09-24 05:35:27.459] 512+0 records in [2025-09-24 05:35:27.459] 512+0 records out [2025-09-24 05:35:27.507] Starting syslogd/klogd: done [2025-09-24 05:35:27.523] DML Start [2025-09-24 05:35:27.699] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:35:27.939] DML res1: 0 [2025-09-24 05:35:28.338] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:35:28.354] Read Success [2025-09-24 05:35:28.354] Verifying certificate... [2025-09-24 05:35:28.626] Verified OK [2025-09-24 05:35:28.642] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:35:30.258] Verified OK [2025-09-24 05:35:30.258] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:35:30.881] Verified OK [2025-09-24 05:35:30.881] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:35:33.599] fs.protected_hardlinks = 1 [2025-09-24 05:35:33.616] fs.protected_symlinks = 1 [2025-09-24 05:35:33.616] kernel.modules_disabled = 1 [2025-09-24 05:35:33.807] [2025-09-24 05:35:33.807] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:35:34.991] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:35:42.752] SBL1:1210.0.1.0 [2025-09-24 05:35:42.784] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:35:44.367] SBL2:1210.0.1.0 [2025-09-24 05:35:44.399] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:35:44.511] j-A [2025-09-24 05:35:51.881] The R5 Autosar Classic is running [2025-09-24 05:35:51.881] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:35:51.881] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:35:52.488] INIT: version 2.96 booting [2025-09-24 05:35:52.585] INIT: Entering runlevel: 5 [2025-09-24 05:35:52.744] mtd32 attached [2025-09-24 05:35:52.760] mtd24 attached [2025-09-24 05:35:52.776] mtd28 attached [2025-09-24 05:35:52.824] ubi0:dml_code is mounted. [2025-09-24 05:35:52.824] RTNETLINK answers: File exists [2025-09-24 05:35:52.882] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:35:52.882] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:35:52.882] ubi2:animations is mounted. [2025-09-24 05:35:52.882] ubi1:textures is mounted. [2025-09-24 05:35:52.882] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:35:52.882] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:35:52.882] data.LB_FadeInType0=100 [2025-09-24 05:35:52.882] data.CHLH_FadeInType0=0 [2025-09-24 05:35:52.882] data.WU_FadeInDelay=0 [2025-09-24 05:35:52.882] max_time_out=0 [2025-09-24 05:35:52.882] No splash screen [2025-09-24 05:35:52.882] stop dss Done [2025-09-24 05:35:52.882] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:35:52.931] /dev/mem opened. [2025-09-24 05:35:52.931] Memory mapped at address 0xffffb72a5000. [2025-09-24 05:35:52.957] Read at address 0x00600018 (0xffffb72a5018): 0x00000000 [2025-09-24 05:35:52.957] Write at address 0x00600018 (0xffffb72a5018): 0x00400040, readback 0x00400040 [2025-09-24 05:35:52.986] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:35:52.986] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:35:53.162] Loaded PowerVR consumer services. [2025-09-24 05:35:53.210] 512+0 records in [2025-09-24 05:35:53.210] 512+0 records out [2025-09-24 05:35:53.242] Starting syslogd/klogd: Waiting data available... [2025-09-24 05:35:53.258] done [2025-09-24 05:35:53.258] DML Start [2025-09-24 05:35:53.418] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:35:53.690] DML res1: 0 [2025-09-24 05:35:54.079] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:35:54.079] Read Success [2025-09-24 05:35:54.079] Verifying certificate... [2025-09-24 05:35:54.302] Verified OK [2025-09-24 05:35:54.319] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:35:55.997] Verified OK [2025-09-24 05:35:55.997] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:35:56.646] Verified OK [2025-09-24 05:35:56.646] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:35:59.364] fs.protected_hardlinks = 1 [2025-09-24 05:35:59.390] fs.protected_symlinks = 1 [2025-09-24 05:35:59.390] kernel.modules_disabled = 1 [2025-09-24 05:35:59.566] [2025-09-24 05:35:59.566] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:36:00.761] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:36:08.544] SBL1:1210.0.1.0 [2025-09-24 05:36:08.576] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:36:10.159] SBL2:1210.0.1.0 [2025-09-24 05:36:10.191] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:36:10.302] j-A [2025-09-24 05:36:17.674] The R5 Autosar Classic is running [2025-09-24 05:36:17.674] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:36:17.674] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:36:18.281] INIT: version 2.96 booting [2025-09-24 05:36:18.393] INIT: Entering runlevel: 5 [2025-09-24 05:36:18.553] mtd28 attached [2025-09-24 05:36:18.553] mtd24 attached [2025-09-24 05:36:18.569] mtd32 attached [2025-09-24 05:36:18.616] ubi0:animations is mounted. [2025-09-24 05:36:18.616] RTNETLINK answers: File exists [2025-09-24 05:36:18.670] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:36:18.670] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:36:18.670] ubi1:textures is mounted. [2025-09-24 05:36:18.670] ubi2:dml_code is mounted. [2025-09-24 05:36:18.670] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:36:18.670] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:36:18.670] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:36:18.670] data.LB_FadeInType0=100 [2025-09-24 05:36:18.670] data.CHLH_FadeInType0=0 [2025-09-24 05:36:18.670] data.WU_FadeInDelay=0 [2025-09-24 05:36:18.670] max_time_out=0 [2025-09-24 05:36:18.670] No splash screen [2025-09-24 05:36:18.670] stop dss Done [2025-09-24 05:36:18.703] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:36:18.703] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:36:18.757] /dev/mem opened. [2025-09-24 05:36:18.757] Memory mapped at address 0xffffb8201000. [2025-09-24 05:36:18.757] Read at address 0x00600018 (0xffffb8201018): 0x00000000 [2025-09-24 05:36:18.757] Write at address 0x00600018 (0xffffb8201018): 0x00400040, readback 0x00400040 [2025-09-24 05:36:18.949] Loaded PowerVR consumer services. [2025-09-24 05:36:18.980] Waiting data available... [2025-09-24 05:36:18.996] 512+0 records in [2025-09-24 05:36:18.996] 512+0 records out [2025-09-24 05:36:19.012] Starting syslogd/klogd: done [2025-09-24 05:36:19.044] DML Start [2025-09-24 05:36:19.220] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:36:19.444] DML res1: 0 [2025-09-24 05:36:19.892] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:36:19.892] Read Success [2025-09-24 05:36:19.908] Verifying certificate... [2025-09-24 05:36:20.131] Verified OK [2025-09-24 05:36:20.147] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:36:21.928] Verified OK [2025-09-24 05:36:21.928] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:36:22.503] Verified OK [2025-09-24 05:36:22.503] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:36:25.109] fs.protected_hardlinks = 1 [2025-09-24 05:36:25.141] fs.protected_symlinks = 1 [2025-09-24 05:36:25.141] kernel.modules_disabled = 1 [2025-09-24 05:36:25.349] [2025-09-24 05:36:25.349] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:36:26.554] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:36:34.339] SBL1:1210.0.1.0 [2025-09-24 05:36:34.387] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:36:35.954] SBL2:1210.0.1.0 [2025-09-24 05:36:35.986] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:36:36.098] j-A [2025-09-24 05:36:43.451] The R5 Autosar Classic is running [2025-09-24 05:36:43.451] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:36:43.472] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:36:44.080] INIT: version 2.96 booting [2025-09-24 05:36:44.191] INIT: Entering runlevel: 5 [2025-09-24 05:36:44.335] mtd24 attached [2025-09-24 05:36:44.351] mtd28 attached [2025-09-24 05:36:44.367] mtd32 attached [2025-09-24 05:36:44.415] RTNETLINK answers: File exists [2025-09-24 05:36:44.485] ubi0:textures is mounted. [2025-09-24 05:36:44.485] ubi1:animations is mounted. [2025-09-24 05:36:44.485] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:36:44.485] ubi2:dml_code is mounted. [2025-09-24 05:36:44.485] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:36:44.485] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:36:44.485] data.LB_FadeInType0=100 [2025-09-24 05:36:44.485] data.CHLH_FadeInType0=0 [2025-09-24 05:36:44.485] data.WU_FadeInDelay=0 [2025-09-24 05:36:44.485] max_time_out=0 [2025-09-24 05:36:44.485] No splash screen [2025-09-24 05:36:44.485] stop dss Done [2025-09-24 05:36:44.485] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:36:44.485] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:36:44.552] /dev/mem opened. [2025-09-24 05:36:44.552] Memory mapped at address 0xffff8a1bd000. [2025-09-24 05:36:44.552] Read at address 0x00600018 (0xffff8a1bd018): 0x00000000 [2025-09-24 05:36:44.552] Write at address 0x00600018 (0xffff8a1bd018): 0x00400040, readback 0x00400040 [2025-09-24 05:36:44.576] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:36:44.576] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:36:44.752] Loaded PowerVR consumer services. [2025-09-24 05:36:44.816] 512+0 records in [2025-09-24 05:36:44.816] 512+0 records out [2025-09-24 05:36:44.832] Waiting data available... [2025-09-24 05:36:44.864] Starting syslogd/klogd: done [2025-09-24 05:36:44.879] DML Start [2025-09-24 05:36:45.056] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:36:45.264] DML res1: 0 [2025-09-24 05:36:45.769] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:36:45.769] Read Success [2025-09-24 05:36:45.769] Verifying certificate... [2025-09-24 05:36:45.993] Verified OK [2025-09-24 05:36:46.009] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:36:47.670] Verified OK [2025-09-24 05:36:47.670] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:36:48.319] Verified OK [2025-09-24 05:36:48.319] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:36:50.973] fs.protected_hardlinks = 1 [2025-09-24 05:36:50.973] fs.protected_symlinks = 1 [2025-09-24 05:36:50.989] kernel.modules_disabled = 1 [2025-09-24 05:36:51.181] [2025-09-24 05:36:51.181] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:36:52.376] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:37:00.129] SBL1:1210.0.1.0 [2025-09-24 05:37:00.177] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:37:01.744] SBL2:1210.0.1.0 [2025-09-24 05:37:01.792] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:37:01.889] j-A [2025-09-24 05:37:09.242] The R5 Autosar Classic is running [2025-09-24 05:37:09.267] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:37:09.267] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:37:09.875] INIT: version 2.96 booting [2025-09-24 05:37:09.987] INIT: Entering runlevel: 5 [2025-09-24 05:37:10.146] mtd24 attached [2025-09-24 05:37:10.146] mtd28 attached [2025-09-24 05:37:10.163] mtd32 attached [2025-09-24 05:37:10.211] RTNETLINK answers: File exists [2025-09-24 05:37:10.211] ubi0:textures is mounted. [2025-09-24 05:37:10.276] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:37:10.276] ubi1:animations is mounted. [2025-09-24 05:37:10.276] ubi2:dml_code is mounted. [2025-09-24 05:37:10.276] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:37:10.276] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:37:10.276] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:37:10.276] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:37:10.276] data.LB_FadeInType0=100 [2025-09-24 05:37:10.276] data.CHLH_FadeInType0=0 [2025-09-24 05:37:10.276] data.WU_FadeInDelay=0 [2025-09-24 05:37:10.276] max_time_out=0 [2025-09-24 05:37:10.276] No splash screen [2025-09-24 05:37:10.276] stop dss Done [2025-09-24 05:37:10.362] /dev/mem opened. [2025-09-24 05:37:10.362] Memory mapped at address 0xffffba508000. [2025-09-24 05:37:10.362] Read at address 0x00600018 (0xffffba508018): 0x00000000 [2025-09-24 05:37:10.362] Write at address 0x00600018 (0xffffba508018): 0x00400040, readback 0x00400040 [2025-09-24 05:37:10.362] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:37:10.362] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:37:10.427] Loaded PowerVR consumer services. [2025-09-24 05:37:10.595] 512+0 records in [2025-09-24 05:37:10.595] 512+0 records out [2025-09-24 05:37:10.595] Waiting data available... [2025-09-24 05:37:10.627] Starting syslogd/klogd: done [2025-09-24 05:37:10.643] DML Start [2025-09-24 05:37:10.851] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:37:11.075] DML res1: 0 [2025-09-24 05:37:11.458] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:37:11.474] Read Success [2025-09-24 05:37:11.474] Verifying certificate... [2025-09-24 05:37:11.746] Verified OK [2025-09-24 05:37:11.762] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:37:13.580] Verified OK [2025-09-24 05:37:13.580] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:37:14.194] Verified OK [2025-09-24 05:37:14.194] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:37:16.704] fs.protected_hardlinks = 1 [2025-09-24 05:37:16.704] fs.protected_symlinks = 1 [2025-09-24 05:37:16.720] kernel.modules_disabled = 1 [2025-09-24 05:37:16.912] [2025-09-24 05:37:16.912] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:37:18.146] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:37:25.915] SBL1:1210.0.1.0 [2025-09-24 05:37:25.963] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:37:27.529] SBL2:1210.0.1.0 [2025-09-24 05:37:27.577] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:37:27.673] j-A [2025-09-24 05:37:35.028] The R5 Autosar Classic is running [2025-09-24 05:37:35.028] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:37:35.049] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:37:35.657] INIT: version 2.96 booting [2025-09-24 05:37:35.769] INIT: Entering runlevel: 5 [2025-09-24 05:37:35.913] mtd28 attached [2025-09-24 05:37:35.929] mtd24 attached [2025-09-24 05:37:35.929] mtd32 attached [2025-09-24 05:37:35.977] ubi0:animations is mounted. [2025-09-24 05:37:35.992] RTNETLINK answers: File exists [2025-09-24 05:37:36.044] ubi1:textures is mounted. [2025-09-24 05:37:36.044] ubi2:dml_code is mounted. [2025-09-24 05:37:36.044] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:37:36.044] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:37:36.044] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:37:36.044] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:37:36.044] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:37:36.044] data.LB_FadeInType0=100 [2025-09-24 05:37:36.044] data.CHLH_FadeInType0=0 [2025-09-24 05:37:36.044] data.WU_FadeInDelay=0 [2025-09-24 05:37:36.044] max_time_out=0 [2025-09-24 05:37:36.044] No splash screen [2025-09-24 05:37:36.044] stop dss Done [2025-09-24 05:37:36.124] /dev/mem opened. [2025-09-24 05:37:36.124] Memory mapped at address 0xffffa6042000. [2025-09-24 05:37:36.124] Read at address 0x00600018 (0xffffa6042018): 0x00000000 [2025-09-24 05:37:36.124] Write at address 0x00600018 (0xffffa6042018): 0x00400040, readback 0x00400040 [2025-09-24 05:37:36.124] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:37:36.124] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:37:36.235] Loaded PowerVR consumer services. [2025-09-24 05:37:36.363] 512+0 records in [2025-09-24 05:37:36.363] 512+0 records out [2025-09-24 05:37:36.363] Waiting data available... [2025-09-24 05:37:36.395] Starting syslogd/klogd: done [2025-09-24 05:37:36.411] DML Start [2025-09-24 05:37:36.620] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:37:36.843] DML res1: 0 [2025-09-24 05:37:37.281] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:37:37.281] Read Success [2025-09-24 05:37:37.281] Verifying certificate... [2025-09-24 05:37:37.554] Verified OK [2025-09-24 05:37:37.570] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:37:39.241] Verified OK [2025-09-24 05:37:39.241] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:37:39.874] Verified OK [2025-09-24 05:37:39.874] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:37:42.449] fs.protected_hardlinks = 1 [2025-09-24 05:37:42.464] fs.protected_symlinks = 1 [2025-09-24 05:37:42.464] kernel.modules_disabled = 1 [2025-09-24 05:37:42.656] [2025-09-24 05:37:42.656] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:37:43.916] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:37:51.715] SBL1:1210.0.1.0 [2025-09-24 05:37:51.747] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:37:53.329] SBL2:1210.0.1.0 [2025-09-24 05:37:53.361] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:37:53.474] j-A [2025-09-24 05:38:00.813] The R5 Autosar Classic is running [2025-09-24 05:38:00.838] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:38:00.838] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:38:01.445] INIT: version 2.96 booting [2025-09-24 05:38:01.558] INIT: Entering runlevel: 5 [2025-09-24 05:38:01.717] mtd24 attached [2025-09-24 05:38:01.717] mtd28 attached [2025-09-24 05:38:01.733] mtd32 attached [2025-09-24 05:38:01.782] RTNETLINK answers: File exists [2025-09-24 05:38:01.798] ubi0:textures is mounted. [2025-09-24 05:38:01.798] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:38:01.826] ubi1:animations is mounted. [2025-09-24 05:38:01.826] ubi2:dml_code is mounted. [2025-09-24 05:38:01.826] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:38:01.826] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:38:01.826] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:38:01.826] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:38:01.852] data.LB_FadeInType0=100 [2025-09-24 05:38:01.852] data.CHLH_FadeInType0=0 [2025-09-24 05:38:01.852] data.WU_FadeInDelay=0 [2025-09-24 05:38:01.852] max_time_out=0 [2025-09-24 05:38:01.852] No splash screen [2025-09-24 05:38:01.852] stop dss Done [2025-09-24 05:38:01.930] /dev/mem opened. [2025-09-24 05:38:01.930] Memory mapped at address 0xffff9ad21000. [2025-09-24 05:38:01.930] Read at address 0x00600018 (0xffff9ad21018): 0x00000000 [2025-09-24 05:38:01.930] Write at address 0x00600018 (0xffff9ad21018): 0x00400040, readback 0x00400040 [2025-09-24 05:38:01.930] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:38:01.930] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:38:02.010] Loaded PowerVR consumer services. [2025-09-24 05:38:02.154] 512+0 records in [2025-09-24 05:38:02.154] 512+0 records out [2025-09-24 05:38:02.170] Waiting data available... [2025-09-24 05:38:02.202] Starting syslogd/klogd: done [2025-09-24 05:38:02.233] DML Start [2025-09-24 05:38:02.377] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:38:02.585] DML res1: 0 [2025-09-24 05:38:03.081] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:38:03.102] Read Success [2025-09-24 05:38:03.102] Verifying certificate... [2025-09-24 05:38:03.341] Verified OK [2025-09-24 05:38:03.357] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:38:05.075] Verified OK [2025-09-24 05:38:05.075] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:38:05.697] Verified OK [2025-09-24 05:38:05.697] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:38:08.255] fs.protected_hardlinks = 1 [2025-09-24 05:38:08.271] fs.protected_symlinks = 1 [2025-09-24 05:38:08.271] kernel.modules_disabled = 1 [2025-09-24 05:38:08.479] [2025-09-24 05:38:08.479] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:38:09.725] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:38:17.509] SBL1:1210.0.1.0 [2025-09-24 05:38:17.557] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:38:19.124] SBL2:1210.0.1.0 [2025-09-24 05:38:19.172] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:38:19.268] j-A [2025-09-24 05:38:26.624] The R5 Autosar Classic is running [2025-09-24 05:38:26.624] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:38:26.645] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:38:27.252] INIT: version 2.96 booting [2025-09-24 05:38:27.364] INIT: Entering runlevel: 5 [2025-09-24 05:38:27.524] mtd24 attached [2025-09-24 05:38:27.524] mtd28 attached [2025-09-24 05:38:27.540] mtd32 attached [2025-09-24 05:38:27.571] ubi0:textures is mounted. [2025-09-24 05:38:27.587] RTNETLINK answers: File exists [2025-09-24 05:38:27.647] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:38:27.647] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:38:27.647] ubi1:animations is mounted. [2025-09-24 05:38:27.647] ubi2:dml_code is mounted. [2025-09-24 05:38:27.647] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:38:27.647] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:38:27.647] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:38:27.647] data.LB_FadeInType0=100 [2025-09-24 05:38:27.647] data.CHLH_FadeInType0=0 [2025-09-24 05:38:27.647] data.WU_FadeInDelay=0 [2025-09-24 05:38:27.647] max_time_out=0 [2025-09-24 05:38:27.647] No splash screen [2025-09-24 05:38:27.647] stop dss Done [2025-09-24 05:38:27.679] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:38:27.695] /dev/mem opened. [2025-09-24 05:38:27.695] Memory mapped at address 0xffff960db000. [2025-09-24 05:38:27.727] Read at address 0x00600018 (0xffff960db018): 0x00000000 [2025-09-24 05:38:27.727] Write at address 0x00600018 (0xffff960db018): 0x00400040, readback 0x00400040 [2025-09-24 05:38:27.727] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:38:27.935] Loaded PowerVR consumer services. [2025-09-24 05:38:27.966] Waiting data available... [2025-09-24 05:38:27.982] 512+0 records in [2025-09-24 05:38:27.982] 512+0 records out [2025-09-24 05:38:28.030] Starting syslogd/klogd: done [2025-09-24 05:38:28.046] DML Start [2025-09-24 05:38:28.223] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:38:28.447] DML res1: 0 [2025-09-24 05:38:28.969] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:38:28.969] Read Success [2025-09-24 05:38:28.969] Verifying certificate... [2025-09-24 05:38:29.257] Verified OK [2025-09-24 05:38:29.289] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:38:31.042] Verified OK [2025-09-24 05:38:31.042] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:38:31.632] Verified OK [2025-09-24 05:38:31.632] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:38:34.127] fs.protected_hardlinks = 1 [2025-09-24 05:38:34.127] fs.protected_symlinks = 1 [2025-09-24 05:38:34.143] kernel.modules_disabled = 1 [2025-09-24 05:38:34.318] [2025-09-24 05:38:34.318] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:38:35.544] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:38:43.292] SBL1:1210.0.1.0 [2025-09-24 05:38:43.340] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:38:44.906] SBL2:1210.0.1.0 [2025-09-24 05:38:44.938] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:38:45.051] j-A [2025-09-24 05:38:52.406] The R5 Autosar Classic is running [2025-09-24 05:38:52.406] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:38:52.427] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:38:53.035] INIT: version 2.96 booting [2025-09-24 05:38:53.147] INIT: Entering runlevel: 5 [2025-09-24 05:38:53.306] mtd28 attached [2025-09-24 05:38:53.306] mtd24 attached [2025-09-24 05:38:53.322] mtd32 attached [2025-09-24 05:38:53.354] ubi0:animations is mounted. [2025-09-24 05:38:53.371] RTNETLINK answers: File exists [2025-09-24 05:38:53.434] ubi1:textures is mounted. [2025-09-24 05:38:53.434] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:38:53.434] ubi2:dml_code is mounted. [2025-09-24 05:38:53.434] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:38:53.434] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:38:53.434] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:38:53.434] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:38:53.434] data.LB_FadeInType0=100 [2025-09-24 05:38:53.434] data.CHLH_FadeInType0=0 [2025-09-24 05:38:53.434] data.WU_FadeInDelay=0 [2025-09-24 05:38:53.434] max_time_out=0 [2025-09-24 05:38:53.434] No splash screen [2025-09-24 05:38:53.434] stop dss Done [2025-09-24 05:38:53.482] /dev/mem opened. [2025-09-24 05:38:53.482] Memory mapped at address 0xffffac34e000. [2025-09-24 05:38:53.519] Read at address 0x00600018 (0xffffac34e018): 0x00000000 [2025-09-24 05:38:53.519] Write at address 0x00600018 (0xffffac34e018): 0x00400040, readback 0x00400040 [2025-09-24 05:38:53.519] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:38:53.519] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:38:53.743] Loaded PowerVR consumer services. [2025-09-24 05:38:53.775] Waiting data available... [2025-09-24 05:38:53.791] 512+0 records in [2025-09-24 05:38:53.791] 512+0 records out [2025-09-24 05:38:53.822] Starting syslogd/klogd: done [2025-09-24 05:38:53.838] DML Start [2025-09-24 05:38:54.031] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:38:54.270] DML res1: 0 [2025-09-24 05:38:54.638] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:38:54.654] Read Success [2025-09-24 05:38:54.654] Verifying certificate... [2025-09-24 05:38:54.894] Verified OK [2025-09-24 05:38:54.910] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:38:56.525] Verified OK [2025-09-24 05:38:56.541] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:38:57.062] Verified OK [2025-09-24 05:38:57.062] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:38:59.829] fs.protected_hardlinks = 1 [2025-09-24 05:38:59.860] fs.protected_symlinks = 1 [2025-09-24 05:38:59.860] kernel.modules_disabled = 1 [2025-09-24 05:39:00.036] [2025-09-24 05:39:00.036] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:39:01.279] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:39:09.114] SBL1:1210.0.1.0 [2025-09-24 05:39:09.146] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:39:10.729] SBL2:1210.0.1.0 [2025-09-24 05:39:10.761] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:39:10.873] j-A [2025-09-24 05:39:18.212] The R5 Autosar Classic is running [2025-09-24 05:39:18.237] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:39:18.237] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:39:18.845] INIT: version 2.96 booting [2025-09-24 05:39:18.957] INIT: Entering runlevel: 5 [2025-09-24 05:39:19.117] mtd28 attached [2025-09-24 05:39:19.133] mtd32 attached [2025-09-24 05:39:19.133] mtd24 attached [2025-09-24 05:39:19.181] ubi0:animations is mounted. [2025-09-24 05:39:19.181] RTNETLINK answers: File exists [2025-09-24 05:39:19.243] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:39:19.243] ubi2:textures is mounted. [2025-09-24 05:39:19.243] ubi1:dml_code is mounted. [2025-09-24 05:39:19.243] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:39:19.243] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:39:19.244] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:39:19.244] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:39:19.244] data.LB_FadeInType0=100 [2025-09-24 05:39:19.244] data.CHLH_FadeInType0=0 [2025-09-24 05:39:19.244] data.WU_FadeInDelay=0 [2025-09-24 05:39:19.244] max_time_out=0 [2025-09-24 05:39:19.244] No splash screen [2025-09-24 05:39:19.244] stop dss Done [2025-09-24 05:39:19.291] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:39:19.291] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:39:19.323] /dev/mem opened. [2025-09-24 05:39:19.323] Memory mapped at address 0xffffba944000. [2025-09-24 05:39:19.323] Read at address 0x00600018 (0xffffba944018): 0x00000000 [2025-09-24 05:39:19.323] Write at address 0x00600018 (0xffffba944018): 0x00400040, readback 0x00400040 [2025-09-24 05:39:19.514] Loaded PowerVR consumer services. [2025-09-24 05:39:19.562] Waiting data available... [2025-09-24 05:39:19.578] 512+0 records in [2025-09-24 05:39:19.578] 512+0 records out [2025-09-24 05:39:19.595] Starting syslogd/klogd: done [2025-09-24 05:39:19.611] DML Start [2025-09-24 05:39:19.754] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:39:19.995] DML res1: 0 [2025-09-24 05:39:20.474] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:39:20.496] Read Success [2025-09-24 05:39:20.496] Verifying certificate... [2025-09-24 05:39:20.720] Verified OK [2025-09-24 05:39:20.736] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:39:22.365] Verified OK [2025-09-24 05:39:22.365] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:39:22.981] Verified OK [2025-09-24 05:39:22.981] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:39:25.651] fs.protected_hardlinks = 1 [2025-09-24 05:39:25.651] fs.protected_symlinks = 1 [2025-09-24 05:39:25.651] kernel.modules_disabled = 1 [2025-09-24 05:39:25.843] [2025-09-24 05:39:25.843] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:39:27.072] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:39:34.896] SBL1:1210.0.1.0 [2025-09-24 05:39:34.944] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:39:36.511] SBL2:1210.0.1.0 [2025-09-24 05:39:36.559] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:39:36.655] j-A [2025-09-24 05:39:44.010] The R5 Autosar Classic is running [2025-09-24 05:39:44.031] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:39:44.031] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:39:44.638] INIT: version 2.96 booting [2025-09-24 05:39:44.750] INIT: Entering runlevel: 5 [2025-09-24 05:39:44.893] mtd24 attached [2025-09-24 05:39:44.909] mtd28 attached [2025-09-24 05:39:44.925] mtd32 attached [2025-09-24 05:39:44.958] ubi0:textures is mounted. [2025-09-24 05:39:44.958] ubi1:animations is mounted. [2025-09-24 05:39:44.974] RTNETLINK answers: File exists [2025-09-24 05:39:44.974] ubi2:dml_code is mounted. [2025-09-24 05:39:45.033] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:39:45.033] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:39:45.033] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:39:45.033] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:39:45.033] data.LB_FadeInType0=100 [2025-09-24 05:39:45.033] data.CHLH_FadeInType0=0 [2025-09-24 05:39:45.033] data.WU_FadeInDelay=0 [2025-09-24 05:39:45.033] max_time_out=0 [2025-09-24 05:39:45.033] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:39:45.033] No splash screen [2025-09-24 05:39:45.033] stop dss Done [2025-09-24 05:39:45.081] /dev/mem opened. [2025-09-24 05:39:45.113] Memory mapped at address 0xffff994ec000. [2025-09-24 05:39:45.113] Read at address 0x00600018 (0xffff994ec018): 0x00000000 [2025-09-24 05:39:45.113] Write at address 0x00600018 (0xffff994ec018): 0x00400040, readback 0x00400040 [2025-09-24 05:39:45.141] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:39:45.141] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:39:45.300] Loaded PowerVR consumer services. [2025-09-24 05:39:45.397] Waiting data available... [2025-09-24 05:39:45.397] 512+0 records in [2025-09-24 05:39:45.413] 512+0 records out [2025-09-24 05:39:45.428] Starting syslogd/klogd: done [2025-09-24 05:39:45.444] DML Start [2025-09-24 05:39:45.636] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:39:45.860] DML res1: 0 [2025-09-24 05:39:46.275] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:39:46.297] Read Success [2025-09-24 05:39:46.297] Verifying certificate... [2025-09-24 05:39:46.505] Verified OK [2025-09-24 05:39:46.521] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:39:48.167] Verified OK [2025-09-24 05:39:48.167] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:39:48.792] Verified OK [2025-09-24 05:39:48.792] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:39:51.382] fs.protected_hardlinks = 1 [2025-09-24 05:39:51.382] fs.protected_symlinks = 1 [2025-09-24 05:39:51.398] kernel.modules_disabled = 1 [2025-09-24 05:39:51.606] [2025-09-24 05:39:51.606] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:39:52.944] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:40:00.712] SBL1:1210.0.1.0 [2025-09-24 05:40:00.744] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:40:02.327] SBL2:1210.0.1.0 [2025-09-24 05:40:02.359] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:40:02.470] j-A [2025-09-24 05:40:09.808] The R5 Autosar Classic is running [2025-09-24 05:40:09.839] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:40:09.839] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:40:10.447] INIT: version 2.96 booting [2025-09-24 05:40:10.558] INIT: Entering runlevel: 5 [2025-09-24 05:40:10.718] mtd28 attached [2025-09-24 05:40:10.718] mtd24 attached [2025-09-24 05:40:10.734] mtd32 attached [2025-09-24 05:40:10.750] ubi0:animations is mounted. [2025-09-24 05:40:10.782] RTNETLINK answers: File exists [2025-09-24 05:40:10.782] ubi1:textures is mounted. [2025-09-24 05:40:10.843] ubi2:dml_code is mounted. [2025-09-24 05:40:10.843] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:40:10.843] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:40:10.843] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:40:10.843] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:40:10.843] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:40:10.843] data.LB_FadeInType0=100 [2025-09-24 05:40:10.843] data.CHLH_FadeInType0=0 [2025-09-24 05:40:10.843] data.WU_FadeInDelay=0 [2025-09-24 05:40:10.843] max_time_out=0 [2025-09-24 05:40:10.843] No splash screen [2025-09-24 05:40:10.843] stop dss Done [2025-09-24 05:40:10.916] /dev/mem opened. [2025-09-24 05:40:10.916] Memory mapped at address 0xffff9a4f0000. [2025-09-24 05:40:10.916] Read at address 0x00600018 (0xffff9a4f0018): 0x00000000 [2025-09-24 05:40:10.916] Write at address 0x00600018 (0xffff9a4f0018): 0x00400040, readback 0x00400040 [2025-09-24 05:40:10.916] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:40:10.948] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:40:11.124] Loaded PowerVR consumer services. [2025-09-24 05:40:11.185] 512+0 records in [2025-09-24 05:40:11.185] 512+0 records out [2025-09-24 05:40:11.185] Waiting data available... [2025-09-24 05:40:11.217] Starting syslogd/klogd: done [2025-09-24 05:40:11.233] DML Start [2025-09-24 05:40:11.424] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:40:11.649] DML res1: 0 [2025-09-24 05:40:12.064] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:40:12.087] Read Success [2025-09-24 05:40:12.087] Verifying certificate... [2025-09-24 05:40:12.374] Verified OK [2025-09-24 05:40:12.390] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:40:14.017] Verified OK [2025-09-24 05:40:14.017] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:40:14.665] Verified OK [2025-09-24 05:40:14.665] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:40:17.319] fs.protected_hardlinks = 1 [2025-09-24 05:40:17.335] fs.protected_symlinks = 1 [2025-09-24 05:40:17.335] kernel.modules_disabled = 1 [2025-09-24 05:40:17.527] [2025-09-24 05:40:17.527] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:40:18.741] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:40:26.489] SBL1:1210.0.1.0 [2025-09-24 05:40:26.521] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:40:28.104] SBL2:1210.0.1.0 [2025-09-24 05:40:28.136] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:40:28.247] j-A [2025-09-24 05:40:35.622] The R5 Autosar Classic is running [2025-09-24 05:40:35.622] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:40:35.622] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:40:36.230] INIT: version 2.96 booting [2025-09-24 05:40:36.341] INIT: Entering runlevel: 5 [2025-09-24 05:40:36.484] mtd28 attached [2025-09-24 05:40:36.500] mtd32 attached [2025-09-24 05:40:36.516] mtd24 attached [2025-09-24 05:40:36.549] ubi0:animations is mounted. [2025-09-24 05:40:36.565] ubi1:dml_code is mounted. [2025-09-24 05:40:36.565] RTNETLINK answers: File exists [2025-09-24 05:40:36.624] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:40:36.624] ubi2:textures is mounted. [2025-09-24 05:40:36.624] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:40:36.624] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:40:36.624] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:40:36.624] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:40:36.624] data.LB_FadeInType0=100 [2025-09-24 05:40:36.624] data.CHLH_FadeInType0=0 [2025-09-24 05:40:36.624] data.WU_FadeInDelay=0 [2025-09-24 05:40:36.624] max_time_out=0 [2025-09-24 05:40:36.624] No splash screen [2025-09-24 05:40:36.624] stop dss Done [2025-09-24 05:40:36.656] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:40:36.698] /dev/mem opened. [2025-09-24 05:40:36.698] Memory mapped at address 0xffffb3bf0000. [2025-09-24 05:40:36.698] Read at address 0x00600018 (0xffffb3bf0018): 0x00000000 [2025-09-24 05:40:36.698] Write at address 0x00600018 (0xffffb3bf0018): 0x00400040, readback 0x00400040 [2025-09-24 05:40:36.698] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:40:36.795] Loaded PowerVR consumer services. [2025-09-24 05:40:36.951] 512+0 records in [2025-09-24 05:40:36.951] 512+0 records out [2025-09-24 05:40:36.951] Waiting data available... [2025-09-24 05:40:36.967] Starting syslogd/klogd: done [2025-09-24 05:40:36.983] DML Start [2025-09-24 05:40:37.191] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:40:37.431] DML res1: 0 [2025-09-24 05:40:37.779] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:40:37.779] Read Success [2025-09-24 05:40:37.779] Verifying certificate... [2025-09-24 05:40:38.017] Verified OK [2025-09-24 05:40:38.034] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:40:39.633] Verified OK [2025-09-24 05:40:39.633] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:40:40.336] Verified OK [2025-09-24 05:40:40.352] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:40:43.071] fs.protected_hardlinks = 1 [2025-09-24 05:40:43.086] fs.protected_symlinks = 1 [2025-09-24 05:40:43.086] kernel.modules_disabled = 1 [2025-09-24 05:40:43.279] [2025-09-24 05:40:43.279] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:40:44.485] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:40:52.285] SBL1:1210.0.1.0 [2025-09-24 05:40:52.316] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:40:53.900] SBL2:1210.0.1.0 [2025-09-24 05:40:53.932] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:40:54.044] j-A [2025-09-24 05:41:01.416] The R5 Autosar Classic is running [2025-09-24 05:41:01.416] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:41:01.416] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:41:02.024] INIT: version 2.96 booting [2025-09-24 05:41:02.135] INIT: Entering runlevel: 5 [2025-09-24 05:41:02.296] mtd24 attached [2025-09-24 05:41:02.296] mtd28 attached [2025-09-24 05:41:02.312] mtd32 attached [2025-09-24 05:41:02.328] ubi0:textures is mounted. [2025-09-24 05:41:02.359] RTNETLINK answers: File exists [2025-09-24 05:41:02.394] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:41:02.394] ubi1:animations is mounted. [2025-09-24 05:41:02.394] ubi2:dml_code is mounted. [2025-09-24 05:41:02.394] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:41:02.394] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:41:02.394] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:41:02.429] data.LB_FadeInType0=100 [2025-09-24 05:41:02.429] data.CHLH_FadeInType0=0 [2025-09-24 05:41:02.429] data.WU_FadeInDelay=0 [2025-09-24 05:41:02.429] max_time_out=0 [2025-09-24 05:41:02.429] No splash screen [2025-09-24 05:41:02.429] stop dss Done [2025-09-24 05:41:02.429] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:41:02.504] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:41:02.504] /dev/mem opened. [2025-09-24 05:41:02.504] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:41:02.504] Memory mapped at address 0xffffbe319000. [2025-09-24 05:41:02.504] Read at address 0x00600018 (0xffffbe319018): 0x00000000 [2025-09-24 05:41:02.504] Write at address 0x00600018 (0xffffbe319018): 0x00400040, readback 0x00400040 [2025-09-24 05:41:02.712] Loaded PowerVR consumer services. [2025-09-24 05:41:02.744] Waiting data available... [2025-09-24 05:41:02.760] 512+0 records in [2025-09-24 05:41:02.760] 512+0 records out [2025-09-24 05:41:02.776] Starting syslogd/klogd: done [2025-09-24 05:41:02.808] DML Start [2025-09-24 05:41:02.952] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:41:03.175] DML res1: 0 [2025-09-24 05:41:03.649] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:41:03.649] Read Success [2025-09-24 05:41:03.649] Verifying certificate... [2025-09-24 05:41:03.873] Verified OK [2025-09-24 05:41:03.890] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:41:05.664] Verified OK [2025-09-24 05:41:05.680] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:41:06.247] Verified OK [2025-09-24 05:41:06.247] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:41:08.804] fs.protected_hardlinks = 1 [2025-09-24 05:41:08.832] fs.protected_symlinks = 1 [2025-09-24 05:41:08.832] kernel.modules_disabled = 1 [2025-09-24 05:41:09.008] [2025-09-24 05:41:09.008] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:41:10.300] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:41:18.065] SBL1:1210.0.1.0 [2025-09-24 05:41:18.113] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:41:19.680] SBL2:1210.0.1.0 [2025-09-24 05:41:19.728] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:41:19.824] j-A [2025-09-24 05:41:27.178] The R5 Autosar Classic is running [2025-09-24 05:41:27.203] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:41:27.203] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:41:27.811] INIT: version 2.96 booting [2025-09-24 05:41:27.922] INIT: Entering runlevel: 5 [2025-09-24 05:41:28.083] mtd32 attached [2025-09-24 05:41:28.083] mtd28 attached [2025-09-24 05:41:28.099] mtd24 attached [2025-09-24 05:41:28.147] RTNETLINK answers: File exists [2025-09-24 05:41:28.147] ubi0:dml_code is mounted. [2025-09-24 05:41:28.186] ubi1:animations is mounted. [2025-09-24 05:41:28.186] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:41:28.186] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:41:28.186] ubi2:textures is mounted. [2025-09-24 05:41:28.186] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:41:28.186] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:41:28.186] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:41:28.217] data.LB_FadeInType0=100 [2025-09-24 05:41:28.217] data.CHLH_FadeInType0=0 [2025-09-24 05:41:28.217] data.WU_FadeInDelay=0 [2025-09-24 05:41:28.217] max_time_out=0 [2025-09-24 05:41:28.217] No splash screen [2025-09-24 05:41:28.217] stop dss Done [2025-09-24 05:41:28.233] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:41:28.248] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:41:28.264] /dev/mem opened. [2025-09-24 05:41:28.264] Memory mapped at address 0xffffae524000. [2025-09-24 05:41:28.290] Read at address 0x00600018 (0xffffae524018): 0x00000000 [2025-09-24 05:41:28.290] Write at address 0x00600018 (0xffffae524018): 0x00400040, readback 0x00400040 [2025-09-24 05:41:28.387] Loaded PowerVR consumer services. [2025-09-24 05:41:28.544] Waiting data available... [2025-09-24 05:41:28.544] 512+0 records in [2025-09-24 05:41:28.544] 512+0 records out [2025-09-24 05:41:28.560] Starting syslogd/klogd: done [2025-09-24 05:41:28.576] DML Start [2025-09-24 05:41:28.768] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:41:28.992] DML res1: 0 [2025-09-24 05:41:29.463] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:41:29.463] Read Success [2025-09-24 05:41:29.463] Verifying certificate... [2025-09-24 05:41:29.703] Verified OK [2025-09-24 05:41:29.719] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:41:31.525] Verified OK [2025-09-24 05:41:31.525] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:41:32.037] Verified OK [2025-09-24 05:41:32.037] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:41:34.467] fs.protected_hardlinks = 1 [2025-09-24 05:41:34.483] fs.protected_symlinks = 1 [2025-09-24 05:41:34.483] kernel.modules_disabled = 1 [2025-09-24 05:41:34.691] [2025-09-24 05:41:34.691] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:41:36.026] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:41:43.887] SBL1:1210.0.1.0 [2025-09-24 05:41:43.919] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:41:45.502] SBL2:1210.0.1.0 [2025-09-24 05:41:45.534] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:41:45.645] j-A [2025-09-24 05:41:52.984] The R5 Autosar Classic is running [2025-09-24 05:41:53.009] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:41:53.009] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:41:53.617] INIT: version 2.96 booting [2025-09-24 05:41:53.729] INIT: Entering runlevel: 5 [2025-09-24 05:41:53.905] mtd32 attached [2025-09-24 05:41:53.905] mtd28 attached [2025-09-24 05:41:53.921] mtd24 attached [2025-09-24 05:41:53.952] ubi0:dml_code is mounted. [2025-09-24 05:41:53.968] RTNETLINK answers: File exists [2025-09-24 05:41:54.003] ubi1:animations is mounted. [2025-09-24 05:41:54.003] ubi2:textures is mounted. [2025-09-24 05:41:54.003] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:41:54.003] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:41:54.003] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:41:54.003] data.LB_FadeInType0=100 [2025-09-24 05:41:54.035] data.CHLH_FadeInType0=0 [2025-09-24 05:41:54.035] data.WU_FadeInDelay=0 [2025-09-24 05:41:54.035] max_time_out=0 [2025-09-24 05:41:54.035] No splash screen [2025-09-24 05:41:54.035] stop dss Done [2025-09-24 05:41:54.035] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:41:54.035] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:41:54.103] /dev/mem opened. [2025-09-24 05:41:54.103] Memory mapped at address 0xffffa8a29000. [2025-09-24 05:41:54.103] Read at address 0x00600018 (0xffffa8a29018): 0x00000000 [2025-09-24 05:41:54.103] Write at address 0x00600018 (0xffffa8a29018): 0x00400040, readback 0x00400040 [2025-09-24 05:41:54.151] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:41:54.167] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:41:54.342] Loaded PowerVR consumer services. [2025-09-24 05:41:54.397] Waiting data available... [2025-09-24 05:41:54.397] 512+0 records in [2025-09-24 05:41:54.397] 512+0 records out [2025-09-24 05:41:54.429] Starting syslogd/klogd: done [2025-09-24 05:41:54.445] DML Start [2025-09-24 05:41:54.621] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:41:54.845] DML res1: 0 [2025-09-24 05:41:55.276] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:41:55.293] Read Success [2025-09-24 05:41:55.293] Verifying certificate... [2025-09-24 05:41:55.533] Verified OK [2025-09-24 05:41:55.548] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:41:57.221] Verified OK [2025-09-24 05:41:57.221] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:41:57.868] Verified OK [2025-09-24 05:41:57.868] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:42:00.474] fs.protected_hardlinks = 1 [2025-09-24 05:42:00.490] fs.protected_symlinks = 1 [2025-09-24 05:42:00.490] kernel.modules_disabled = 1 [2025-09-24 05:42:00.698] [2025-09-24 05:42:00.698] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:42:01.876] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:42:09.683] SBL1:1210.0.1.0 [2025-09-24 05:42:09.730] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:42:11.296] SBL2:1210.0.1.0 [2025-09-24 05:42:11.344] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:42:11.441] j-A [2025-09-24 05:42:18.796] The R5 Autosar Classic is running [2025-09-24 05:42:18.796] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:42:18.817] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:42:19.424] INIT: version 2.96 booting [2025-09-24 05:42:19.537] INIT: Entering runlevel: 5 [2025-09-24 05:42:19.696] mtd24 attached [2025-09-24 05:42:19.696] mtd28 attached [2025-09-24 05:42:19.712] mtd32 attached [2025-09-24 05:42:19.760] ubi0:textures is mounted. [2025-09-24 05:42:19.760] RTNETLINK answers: File exists [2025-09-24 05:42:19.810] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:42:19.810] ubi2:dml_code is mounted. [2025-09-24 05:42:19.810] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:42:19.810] ubi1:animations is mounted. [2025-09-24 05:42:19.810] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:42:19.810] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:42:19.810] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:42:19.810] data.LB_FadeInType0=100 [2025-09-24 05:42:19.810] data.CHLH_FadeInType0=0 [2025-09-24 05:42:19.810] data.WU_FadeInDelay=0 [2025-09-24 05:42:19.810] max_time_out=0 [2025-09-24 05:42:19.810] No splash screen [2025-09-24 05:42:19.810] stop dss Done [2025-09-24 05:42:19.842] /dev/mem opened. [2025-09-24 05:42:19.842] Memory mapped at address 0xffff96da5000. [2025-09-24 05:42:19.868] Read at address 0x00600018 (0xffff96da5018): 0x00000000 [2025-09-24 05:42:19.868] Write at address 0x00600018 (0xffff96da5018): 0x00400040, readback 0x00400040 [2025-09-24 05:42:19.899] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:42:19.930] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:42:20.042] Loaded PowerVR consumer services. [2025-09-24 05:42:20.138] Waiting data available... [2025-09-24 05:42:20.154] 512+0 records in [2025-09-24 05:42:20.154] 512+0 records out [2025-09-24 05:42:20.202] Starting syslogd/klogd: done [2025-09-24 05:42:20.218] DML Start [2025-09-24 05:42:20.393] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:42:20.633] DML res1: 0 [2025-09-24 05:42:21.061] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:42:21.061] Read Success [2025-09-24 05:42:21.061] Verifying certificate... [2025-09-24 05:42:21.300] Verified OK [2025-09-24 05:42:21.300] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:42:22.955] Verified OK [2025-09-24 05:42:22.955] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:42:23.578] Verified OK [2025-09-24 05:42:23.599] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:42:26.253] fs.protected_hardlinks = 1 [2025-09-24 05:42:26.269] fs.protected_symlinks = 1 [2025-09-24 05:42:26.269] kernel.modules_disabled = 1 [2025-09-24 05:42:26.460] [2025-09-24 05:42:26.460] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:42:27.720] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:42:35.479] SBL1:1210.0.1.0 [2025-09-24 05:42:35.527] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:42:37.095] SBL2:1210.0.1.0 [2025-09-24 05:42:37.142] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:42:37.238] j-A [2025-09-24 05:42:44.594] The R5 Autosar Classic is running [2025-09-24 05:42:44.615] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:42:44.615] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:42:45.223] INIT: version 2.96 booting [2025-09-24 05:42:45.335] INIT: Entering runlevel: 5 [2025-09-24 05:42:45.495] mtd28 attached [2025-09-24 05:42:45.495] mtd32 attached [2025-09-24 05:42:45.510] mtd24 attached [2025-09-24 05:42:45.542] ubi0:animations is mounted. [2025-09-24 05:42:45.558] ubi2:textures is mounted. [2025-09-24 05:42:45.631] RTNETLINK answers: File exists [2025-09-24 05:42:45.631] ubi1:dml_code is mounted. [2025-09-24 05:42:45.631] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:42:45.631] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:42:45.631] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:42:45.631] data.LB_FadeInType0=100 [2025-09-24 05:42:45.631] data.CHLH_FadeInType0=0 [2025-09-24 05:42:45.631] data.WU_FadeInDelay=0 [2025-09-24 05:42:45.631] max_time_out=0 [2025-09-24 05:42:45.631] No splash screen [2025-09-24 05:42:45.631] stop dss Done [2025-09-24 05:42:45.631] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:42:45.631] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:42:45.664] /dev/mem opened. [2025-09-24 05:42:45.664] Memory mapped at address 0xffffbb48f000. [2025-09-24 05:42:45.696] Read at address 0x00600018 (0xffffbb48f018): 0x00000000 [2025-09-24 05:42:45.696] Write at address 0x00600018 (0xffffbb48f018): 0x00400040, readback 0x00400040 [2025-09-24 05:42:45.696] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:42:45.696] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:42:45.856] Loaded PowerVR consumer services. [2025-09-24 05:42:45.966] Waiting data available... [2025-09-24 05:42:45.966] 512+0 records in [2025-09-24 05:42:45.966] 512+0 records out [2025-09-24 05:42:45.998] Starting syslogd/klogd: done [2025-09-24 05:42:46.031] DML Start [2025-09-24 05:42:46.207] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:42:46.398] DML res1: 0 [2025-09-24 05:42:46.893] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:42:46.914] Read Success [2025-09-24 05:42:46.914] Verifying certificate... [2025-09-24 05:42:47.123] Verified OK [2025-09-24 05:42:47.155] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:42:48.923] Verified OK [2025-09-24 05:42:48.923] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:42:49.446] Verified OK [2025-09-24 05:42:49.446] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:42:51.987] fs.protected_hardlinks = 1 [2025-09-24 05:42:52.003] fs.protected_symlinks = 1 [2025-09-24 05:42:52.003] kernel.modules_disabled = 1 [2025-09-24 05:42:52.195] [2025-09-24 05:42:52.195] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:42:53.498] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:43:01.276] SBL1:1210.0.1.0 [2025-09-24 05:43:01.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:43:02.891] SBL2:1210.0.1.0 [2025-09-24 05:43:02.938] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:43:03.034] j-A [2025-09-24 05:43:10.390] The R5 Autosar Classic is running [2025-09-24 05:43:10.413] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:43:10.413] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:43:11.020] INIT: version 2.96 booting [2025-09-24 05:43:11.132] INIT: Entering runlevel: 5 [2025-09-24 05:43:11.292] mtd32 attached [2025-09-24 05:43:11.292] mtd24 attached [2025-09-24 05:43:11.308] mtd28 attached [2025-09-24 05:43:11.340] ubi0:dml_code is mounted. [2025-09-24 05:43:11.356] RTNETLINK answers: File exists [2025-09-24 05:43:11.417] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:43:11.417] ubi1:textures is mounted. [2025-09-24 05:43:11.417] ubi2:animations is mounted. [2025-09-24 05:43:11.417] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:43:11.417] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:43:11.417] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:43:11.417] data.LB_FadeInType0=100 [2025-09-24 05:43:11.417] data.CHLH_FadeInType0=0 [2025-09-24 05:43:11.417] data.WU_FadeInDelay=0 [2025-09-24 05:43:11.417] max_time_out=0 [2025-09-24 05:43:11.417] No splash screen [2025-09-24 05:43:11.417] stop dss Done [2025-09-24 05:43:11.417] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:43:11.492] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:43:11.492] /dev/mem opened. [2025-09-24 05:43:11.492] Memory mapped at address 0xffff94763000. [2025-09-24 05:43:11.492] Read at address 0x00600018 (0xffff94763018): 0x00000000 [2025-09-24 05:43:11.492] Write at address 0x00600018 (0xffff94763018): 0x00400040, readback 0x00400040 [2025-09-24 05:43:11.492] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:43:11.572] Loaded PowerVR consumer services. [2025-09-24 05:43:11.741] Waiting data available... [2025-09-24 05:43:11.741] 512+0 records in [2025-09-24 05:43:11.741] 512+0 records out [2025-09-24 05:43:11.772] Starting syslogd/klogd: done [2025-09-24 05:43:11.788] DML Start [2025-09-24 05:43:11.997] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:43:12.205] DML res1: 0 [2025-09-24 05:43:12.586] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:43:12.586] Read Success [2025-09-24 05:43:12.586] Verifying certificate... [2025-09-24 05:43:12.827] Verified OK [2025-09-24 05:43:12.842] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:43:14.544] Verified OK [2025-09-24 05:43:14.544] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:43:15.077] Verified OK [2025-09-24 05:43:15.077] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:43:17.888] fs.protected_hardlinks = 1 [2025-09-24 05:43:17.888] fs.protected_symlinks = 1 [2025-09-24 05:43:17.888] kernel.modules_disabled = 1 [2025-09-24 05:43:18.064] [2025-09-24 05:43:18.064] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:43:19.311] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:43:27.128] SBL1:1210.0.1.0 [2025-09-24 05:43:27.176] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:43:28.741] SBL2:1210.0.1.0 [2025-09-24 05:43:28.773] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:43:28.886] j-A [2025-09-24 05:43:36.241] The R5 Autosar Classic is running [2025-09-24 05:43:36.241] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:43:36.262] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:43:36.870] INIT: version 2.96 booting [2025-09-24 05:43:36.982] INIT: Entering runlevel: 5 [2025-09-24 05:43:37.125] mtd24 attached [2025-09-24 05:43:37.141] mtd28 attached [2025-09-24 05:43:37.157] mtd32 attached [2025-09-24 05:43:37.239] RTNETLINK answers: File exists [2025-09-24 05:43:37.239] ubi0:textures is mounted. [2025-09-24 05:43:37.239] ubi1:animations is mounted. [2025-09-24 05:43:37.239] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:43:37.239] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:43:37.239] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:43:37.239] ubi2:dml_code is mounted. [2025-09-24 05:43:37.239] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:43:37.239] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:43:37.255] data.LB_FadeInType0=100 [2025-09-24 05:43:37.276] data.CHLH_FadeInType0=0 [2025-09-24 05:43:37.276] data.WU_FadeInDelay=0 [2025-09-24 05:43:37.276] max_time_out=0 [2025-09-24 05:43:37.276] No splash screen [2025-09-24 05:43:37.276] stop dss Done [2025-09-24 05:43:37.292] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:43:37.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:43:37.348] /dev/mem opened. [2025-09-24 05:43:37.348] Memory mapped at address 0xffff9670b000. [2025-09-24 05:43:37.348] Read at address 0x00600018 (0xffff9670b018): 0x00000000 [2025-09-24 05:43:37.348] Write at address 0x00600018 (0xffff9670b018): 0x00400040, readback 0x00400040 [2025-09-24 05:43:37.428] Loaded PowerVR consumer services. [2025-09-24 05:43:37.573] Waiting data available... [2025-09-24 05:43:37.588] 512+0 records in [2025-09-24 05:43:37.588] 512+0 records out [2025-09-24 05:43:37.636] Starting syslogd/klogd: done [2025-09-24 05:43:37.652] DML Start [2025-09-24 05:43:37.813] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:43:38.020] DML res1: 0 [2025-09-24 05:43:38.452] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:43:38.469] Read Success [2025-09-24 05:43:38.469] Verifying certificate... [2025-09-24 05:43:38.708] Verified OK [2025-09-24 05:43:38.740] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:43:40.440] Verified OK [2025-09-24 05:43:40.440] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:43:41.029] Verified OK [2025-09-24 05:43:41.029] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:43:43.699] fs.protected_hardlinks = 1 [2025-09-24 05:43:43.715] fs.protected_symlinks = 1 [2025-09-24 05:43:43.715] kernel.modules_disabled = 1 [2025-09-24 05:43:43.923] [2025-09-24 05:43:43.923] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:43:45.139] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:43:52.926] SBL1:1210.0.1.0 [2025-09-24 05:43:52.974] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:43:54.557] SBL2:1210.0.1.0 [2025-09-24 05:43:54.588] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:43:54.700] j-A [2025-09-24 05:44:02.038] The R5 Autosar Classic is running [2025-09-24 05:44:02.063] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:44:02.063] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:44:02.670] INIT: version 2.96 booting [2025-09-24 05:44:02.783] INIT: Entering runlevel: 5 [2025-09-24 05:44:02.943] mtd32 attached [2025-09-24 05:44:02.959] mtd28 attached [2025-09-24 05:44:02.959] mtd24 attached [2025-09-24 05:44:02.974] ubi0:dml_code is mounted. [2025-09-24 05:44:03.007] RTNETLINK answers: File exists [2025-09-24 05:44:03.060] ubi1:animations is mounted. [2025-09-24 05:44:03.060] ubi2:textures is mounted. [2025-09-24 05:44:03.060] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:44:03.060] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:44:03.060] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:44:03.060] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:44:03.060] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:44:03.060] data.LB_FadeInType0=100 [2025-09-24 05:44:03.060] data.CHLH_FadeInType0=0 [2025-09-24 05:44:03.060] data.WU_FadeInDelay=0 [2025-09-24 05:44:03.060] max_time_out=0 [2025-09-24 05:44:03.060] No splash screen [2025-09-24 05:44:03.060] stop dss Done [2025-09-24 05:44:03.107] /dev/mem opened. [2025-09-24 05:44:03.107] Memory mapped at address 0xffff863cf000. [2025-09-24 05:44:03.143] Read at address 0x00600018 (0xffff863cf018): 0x00000000 [2025-09-24 05:44:03.143] Write at address 0x00600018 (0xffff863cf018): 0x00400040, readback 0x00400040 [2025-09-24 05:44:03.143] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:44:03.143] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:44:03.384] Loaded PowerVR consumer services. [2025-09-24 05:44:03.443] Waiting data available... [2025-09-24 05:44:03.443] 512+0 records in [2025-09-24 05:44:03.443] 512+0 records out [2025-09-24 05:44:03.475] Starting syslogd/klogd: done [2025-09-24 05:44:03.492] DML Start [2025-09-24 05:44:03.635] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:44:03.859] DML res1: 0 [2025-09-24 05:44:04.355] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:44:04.376] Read Success [2025-09-24 05:44:04.376] Verifying certificate... [2025-09-24 05:44:04.599] Verified OK [2025-09-24 05:44:04.599] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:44:06.321] Verified OK [2025-09-24 05:44:06.321] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:44:06.929] Verified OK [2025-09-24 05:44:06.929] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:44:09.488] fs.protected_hardlinks = 1 [2025-09-24 05:44:09.504] fs.protected_symlinks = 1 [2025-09-24 05:44:09.504] kernel.modules_disabled = 1 [2025-09-24 05:44:09.696] [2025-09-24 05:44:09.696] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:44:10.943] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:44:18.759] SBL1:1210.0.1.0 [2025-09-24 05:44:18.807] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:44:20.373] SBL2:1210.0.1.0 [2025-09-24 05:44:20.421] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:44:20.517] j-A [2025-09-24 05:44:27.871] The R5 Autosar Classic is running [2025-09-24 05:44:27.895] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:44:27.895] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:44:28.502] INIT: version 2.96 booting [2025-09-24 05:44:28.614] INIT: Entering runlevel: 5 [2025-09-24 05:44:28.774] mtd32 attached [2025-09-24 05:44:28.774] mtd24 attached [2025-09-24 05:44:28.790] mtd28 attached [2025-09-24 05:44:28.838] ubi0:dml_code is mounted. [2025-09-24 05:44:28.838] RTNETLINK answers: File exists [2025-09-24 05:44:28.854] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:44:28.906] ubi2:animations is mounted. [2025-09-24 05:44:28.906] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:44:28.906] ubi1:textures is mounted. [2025-09-24 05:44:28.906] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:44:28.906] data.LB_FadeInType0=100 [2025-09-24 05:44:28.906] data.CHLH_FadeInType0=0 [2025-09-24 05:44:28.906] data.WU_FadeInDelay=0 [2025-09-24 05:44:28.906] max_time_out=0 [2025-09-24 05:44:28.906] No splash screen [2025-09-24 05:44:28.906] stop dss Done [2025-09-24 05:44:28.906] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:44:28.906] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:44:28.973] /dev/mem opened. [2025-09-24 05:44:28.973] Memory mapped at address 0xffffafe40000. [2025-09-24 05:44:28.973] Read at address 0x00600018 (0xffffafe40018): 0x00000000 [2025-09-24 05:44:28.973] Write at address 0x00600018 (0xffffafe40018): 0x00400040, readback 0x00400040 [2025-09-24 05:44:28.973] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:44:28.989] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:44:29.070] Loaded PowerVR consumer services. [2025-09-24 05:44:29.244] Waiting data available... [2025-09-24 05:44:29.244] 512+0 records in [2025-09-24 05:44:29.244] 512+0 records out [2025-09-24 05:44:29.276] Starting syslogd/klogd: done [2025-09-24 05:44:29.292] DML Start [2025-09-24 05:44:29.500] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:44:29.708] DML res1: 0 [2025-09-24 05:44:30.156] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:44:30.172] Read Success [2025-09-24 05:44:30.172] Verifying certificate... [2025-09-24 05:44:30.443] Verified OK [2025-09-24 05:44:30.459] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:44:32.228] Verified OK [2025-09-24 05:44:32.228] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:44:32.763] Verified OK [2025-09-24 05:44:32.763] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:44:35.162] fs.protected_hardlinks = 1 [2025-09-24 05:44:35.178] fs.protected_symlinks = 1 [2025-09-24 05:44:35.194] kernel.modules_disabled = 1 [2025-09-24 05:44:35.402] [2025-09-24 05:44:35.402] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:44:36.753] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:44:44.546] SBL1:1210.0.1.0 [2025-09-24 05:44:44.577] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:44:46.160] SBL2:1210.0.1.0 [2025-09-24 05:44:46.192] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:44:46.305] j-A [2025-09-24 05:44:53.676] The R5 Autosar Classic is running [2025-09-24 05:44:53.676] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:44:53.676] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:44:54.284] INIT: version 2.96 booting [2025-09-24 05:44:54.395] INIT: Entering runlevel: 5 [2025-09-24 05:44:54.539] mtd24 attached [2025-09-24 05:44:54.556] mtd28 attached [2025-09-24 05:44:54.572] mtd32 attached [2025-09-24 05:44:54.656] RTNETLINK answers: File exists [2025-09-24 05:44:54.656] ubi0:textures is mounted. [2025-09-24 05:44:54.656] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:44:54.656] ubi1:animations is mounted. [2025-09-24 05:44:54.656] ubi2:dml_code is mounted. [2025-09-24 05:44:54.656] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:44:54.656] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:44:54.656] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:44:54.656] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:44:54.679] data.LB_FadeInType0=100 [2025-09-24 05:44:54.679] data.CHLH_FadeInType0=0 [2025-09-24 05:44:54.679] data.WU_FadeInDelay=0 [2025-09-24 05:44:54.679] max_time_out=0 [2025-09-24 05:44:54.679] No splash screen [2025-09-24 05:44:54.679] stop dss Done [2025-09-24 05:44:54.761] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:44:54.761] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:44:54.761] /dev/mem opened. [2025-09-24 05:44:54.761] Memory mapped at address 0xffffb1312000. [2025-09-24 05:44:54.761] Read at address 0x00600018 (0xffffb1312018): 0x00000000 [2025-09-24 05:44:54.761] Write at address 0x00600018 (0xffffb1312018): 0x00400040, readback 0x00400040 [2025-09-24 05:44:54.889] Loaded PowerVR consumer services. [2025-09-24 05:44:55.001] Waiting data available... [2025-09-24 05:44:55.017] 512+0 records in [2025-09-24 05:44:55.017] 512+0 records out [2025-09-24 05:44:55.065] Starting syslogd/klogd: done [2025-09-24 05:44:55.081] DML Start [2025-09-24 05:44:55.273] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:44:55.497] DML res1: 0 [2025-09-24 05:44:55.960] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:44:55.960] Read Success [2025-09-24 05:44:55.960] Verifying certificate... [2025-09-24 05:44:56.231] Verified OK [2025-09-24 05:44:56.231] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:44:57.936] Verified OK [2025-09-24 05:44:57.936] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:44:58.506] Verified OK [2025-09-24 05:44:58.506] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:45:01.144] fs.protected_hardlinks = 1 [2025-09-24 05:45:01.144] fs.protected_symlinks = 1 [2025-09-24 05:45:01.159] kernel.modules_disabled = 1 [2025-09-24 05:45:01.352] [2025-09-24 05:45:01.352] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:45:02.578] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:45:10.343] SBL1:1210.0.1.0 [2025-09-24 05:45:10.391] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:45:11.958] SBL2:1210.0.1.0 [2025-09-24 05:45:12.006] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:45:12.102] j-A [2025-09-24 05:45:19.456] The R5 Autosar Classic is running [2025-09-24 05:45:19.478] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:45:19.478] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:45:20.086] INIT: version 2.96 booting [2025-09-24 05:45:20.197] INIT: Entering runlevel: 5 [2025-09-24 05:45:20.358] mtd32 attached [2025-09-24 05:45:20.358] mtd28 attached [2025-09-24 05:45:20.374] mtd24 attached [2025-09-24 05:45:20.421] ubi0:dml_code is mounted. [2025-09-24 05:45:20.421] RTNETLINK answers: File exists [2025-09-24 05:45:20.481] ubi1:animations is mounted. [2025-09-24 05:45:20.481] ubi2:textures is mounted. [2025-09-24 05:45:20.481] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:45:20.481] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:45:20.481] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:45:20.481] data.LB_FadeInType0=100 [2025-09-24 05:45:20.481] data.CHLH_FadeInType0=0 [2025-09-24 05:45:20.481] data.WU_FadeInDelay=0 [2025-09-24 05:45:20.481] max_time_out=0 [2025-09-24 05:45:20.481] No splash screen [2025-09-24 05:45:20.481] stop dss Done [2025-09-24 05:45:20.481] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:45:20.481] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:45:20.513] /dev/mem opened. [2025-09-24 05:45:20.513] Memory mapped at address 0xffff8bc4c000. [2025-09-24 05:45:20.551] Read at address 0x00600018 (0xffff8bc4c018): 0x00000000 [2025-09-24 05:45:20.551] Write at address 0x00600018 (0xffff8bc4c018): 0x00400040, readback 0x00400040 [2025-09-24 05:45:20.551] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:45:20.551] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:45:20.790] Loaded PowerVR consumer services. [2025-09-24 05:45:20.839] Waiting data available... [2025-09-24 05:45:20.839] 512+0 records in [2025-09-24 05:45:20.839] 512+0 records out [2025-09-24 05:45:20.903] Starting syslogd/klogd: done [2025-09-24 05:45:20.919] DML Start [2025-09-24 05:45:21.095] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:45:21.318] DML res1: 0 [2025-09-24 05:45:21.755] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:45:21.755] Read Success [2025-09-24 05:45:21.755] Verifying certificate... [2025-09-24 05:45:22.011] Verified OK [2025-09-24 05:45:22.027] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:45:23.849] Verified OK [2025-09-24 05:45:23.849] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:45:24.377] Verified OK [2025-09-24 05:45:24.377] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:45:26.822] fs.protected_hardlinks = 1 [2025-09-24 05:45:26.838] fs.protected_symlinks = 1 [2025-09-24 05:45:26.838] kernel.modules_disabled = 1 [2025-09-24 05:45:27.030] [2025-09-24 05:45:27.030] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:45:28.397] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:45:36.138] SBL1:1210.0.1.0 [2025-09-24 05:45:36.170] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:45:37.753] SBL2:1210.0.1.0 [2025-09-24 05:45:37.786] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:45:37.898] j-A [2025-09-24 05:45:45.270] The R5 Autosar Classic is running [2025-09-24 05:45:45.270] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:45:45.270] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:45:45.877] INIT: version 2.96 booting [2025-09-24 05:45:45.989] INIT: Entering runlevel: 5 [2025-09-24 05:45:46.149] mtd32 attached [2025-09-24 05:45:46.149] mtd28 attached [2025-09-24 05:45:46.165] mtd24 attached [2025-09-24 05:45:46.213] RTNETLINK answers: File exists [2025-09-24 05:45:46.261] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:45:46.261] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:45:46.261] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:45:46.261] ubi2:textures is mounted. [2025-09-24 05:45:46.261] ubi0:dml_code is mounted. [2025-09-24 05:45:46.261] ubi1:animations is mounted. [2025-09-24 05:45:46.261] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:45:46.261] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:45:46.287] data.LB_FadeInType0=100 [2025-09-24 05:45:46.287] data.CHLH_FadeInType0=0 [2025-09-24 05:45:46.287] data.WU_FadeInDelay=0 [2025-09-24 05:45:46.287] max_time_out=0 [2025-09-24 05:45:46.287] No splash screen [2025-09-24 05:45:46.287] stop dss Done [2025-09-24 05:45:46.319] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:45:46.372] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:45:46.372] /dev/mem opened. [2025-09-24 05:45:46.372] Memory mapped at address 0xffffa1c85000. [2025-09-24 05:45:46.372] Read at address 0x00600018 (0xffffa1c85018): 0x00000000 [2025-09-24 05:45:46.372] Write at address 0x00600018 (0xffffa1c85018): 0x00400040, readback 0x00400040 [2025-09-24 05:45:46.469] Loaded PowerVR consumer services. [2025-09-24 05:45:46.597] 512+0 records in [2025-09-24 05:45:46.597] 512+0 records out [2025-09-24 05:45:46.613] Waiting data available... [2025-09-24 05:45:46.628] Starting syslogd/klogd: done [2025-09-24 05:45:46.644] DML Start [2025-09-24 05:45:46.837] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:45:47.044] DML res1: 0 [2025-09-24 05:45:47.492] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:45:47.513] Read Success [2025-09-24 05:45:47.513] Verifying certificate... [2025-09-24 05:45:47.784] Verified OK [2025-09-24 05:45:47.800] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:45:49.447] Verified OK [2025-09-24 05:45:49.447] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:45:50.118] Verified OK [2025-09-24 05:45:50.118] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:45:52.724] fs.protected_hardlinks = 1 [2025-09-24 05:45:52.740] fs.protected_symlinks = 1 [2025-09-24 05:45:52.740] kernel.modules_disabled = 1 [2025-09-24 05:45:52.932] [2025-09-24 05:45:52.932] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:45:54.094] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:46:01.939] SBL1:1210.0.1.0 [2025-09-24 05:46:01.971] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:46:03.555] SBL2:1210.0.1.0 [2025-09-24 05:46:03.587] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:46:03.698] j-A [2025-09-24 05:46:11.071] The R5 Autosar Classic is running [2025-09-24 05:46:11.071] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:46:11.071] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:46:11.679] INIT: version 2.96 booting [2025-09-24 05:46:11.790] INIT: Entering runlevel: 5 [2025-09-24 05:46:11.950] mtd24 attached [2025-09-24 05:46:11.950] mtd28 attached [2025-09-24 05:46:11.966] mtd32 attached [2025-09-24 05:46:11.998] ubi0:textures is mounted. [2025-09-24 05:46:12.014] RTNETLINK answers: File exists [2025-09-24 05:46:12.014] ubi1:animations is mounted. [2025-09-24 05:46:12.073] ubi2:dml_code is mounted. [2025-09-24 05:46:12.073] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:46:12.073] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:46:12.073] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:46:12.073] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:46:12.073] data.LB_FadeInType0=100 [2025-09-24 05:46:12.073] data.CHLH_FadeInType0=0 [2025-09-24 05:46:12.073] data.WU_FadeInDelay=0 [2025-09-24 05:46:12.073] max_time_out=0 [2025-09-24 05:46:12.073] No splash screen [2025-09-24 05:46:12.073] stop dss Done [2025-09-24 05:46:12.073] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:46:12.105] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:46:12.121] /dev/mem opened. [2025-09-24 05:46:12.153] Memory mapped at address 0xffff99cff000. [2025-09-24 05:46:12.153] Read at address 0x00600018 (0xffff99cff018): 0x00000000 [2025-09-24 05:46:12.153] Write at address 0x00600018 (0xffff99cff018): 0x00400040, readback 0x00400040 [2025-09-24 05:46:12.153] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:46:12.216] Loaded PowerVR consumer services. [2025-09-24 05:46:12.376] Waiting data available... [2025-09-24 05:46:12.392] 512+0 records in [2025-09-24 05:46:12.392] 512+0 records out [2025-09-24 05:46:12.424] Starting syslogd/klogd: done [2025-09-24 05:46:12.440] DML Start [2025-09-24 05:46:12.616] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:46:12.855] DML res1: 0 [2025-09-24 05:46:13.280] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:46:13.280] Read Success [2025-09-24 05:46:13.280] Verifying certificate... [2025-09-24 05:46:13.536] Verified OK [2025-09-24 05:46:13.552] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:46:15.286] Verified OK [2025-09-24 05:46:15.286] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:46:15.899] Verified OK [2025-09-24 05:46:15.899] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:46:18.500] fs.protected_hardlinks = 1 [2025-09-24 05:46:18.500] fs.protected_symlinks = 1 [2025-09-24 05:46:18.500] kernel.modules_disabled = 1 [2025-09-24 05:46:18.692] [2025-09-24 05:46:18.692] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:46:19.933] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:46:27.740] SBL1:1210.0.1.0 [2025-09-24 05:46:27.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:46:29.370] SBL2:1210.0.1.0 [2025-09-24 05:46:29.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:46:29.515] j-A [2025-09-24 05:46:36.854] The R5 Autosar Classic is running [2025-09-24 05:46:36.879] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:46:36.879] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:46:37.487] INIT: version 2.96 booting [2025-09-24 05:46:37.598] INIT: Entering runlevel: 5 [2025-09-24 05:46:37.743] mtd24 attached [2025-09-24 05:46:37.759] mtd28 attached [2025-09-24 05:46:37.774] mtd32 attached [2025-09-24 05:46:37.822] ubi0:textures is mounted. [2025-09-24 05:46:37.886] RTNETLINK answers: File exists [2025-09-24 05:46:37.886] ubi1:animations is mounted. [2025-09-24 05:46:37.886] ubi2:dml_code is mounted. [2025-09-24 05:46:37.886] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:46:37.886] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:46:37.886] data.LB_FadeInType0=100 [2025-09-24 05:46:37.886] data.CHLH_FadeInType0=0 [2025-09-24 05:46:37.886] data.WU_FadeInDelay=0 [2025-09-24 05:46:37.886] max_time_out=0 [2025-09-24 05:46:37.886] No splash screen [2025-09-24 05:46:37.886] stop dss Done [2025-09-24 05:46:37.886] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:46:37.886] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:46:37.886] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:46:37.953] /dev/mem opened. [2025-09-24 05:46:37.953] Memory mapped at address 0xffff8ab83000. [2025-09-24 05:46:37.953] Read at address 0x00600018 (0xffff8ab83018): 0x00000000 [2025-09-24 05:46:37.953] Write at address 0x00600018 (0xffff8ab83018): 0x00400040, readback 0x00400040 [2025-09-24 05:46:37.953] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:46:37.969] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:46:38.161] Loaded PowerVR consumer services. [2025-09-24 05:46:38.193] Waiting data available... [2025-09-24 05:46:38.209] 512+0 records in [2025-09-24 05:46:38.209] 512+0 records out [2025-09-24 05:46:38.257] Starting syslogd/klogd: done [2025-09-24 05:46:38.273] DML Start [2025-09-24 05:46:38.449] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:46:38.672] DML res1: 0 [2025-09-24 05:46:39.136] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:46:39.157] Read Success [2025-09-24 05:46:39.157] Verifying certificate... [2025-09-24 05:46:39.397] Verified OK [2025-09-24 05:46:39.413] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:46:41.007] Verified OK [2025-09-24 05:46:41.007] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:46:41.598] Verified OK [2025-09-24 05:46:41.598] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:46:44.253] fs.protected_hardlinks = 1 [2025-09-24 05:46:44.253] fs.protected_symlinks = 1 [2025-09-24 05:46:44.269] kernel.modules_disabled = 1 [2025-09-24 05:46:44.460] [2025-09-24 05:46:44.460] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:46:45.767] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:46:53.532] SBL1:1210.0.1.0 [2025-09-24 05:46:53.581] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:46:55.147] SBL2:1210.0.1.0 [2025-09-24 05:46:55.195] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:46:55.307] j-A [2025-09-24 05:47:02.646] The R5 Autosar Classic is running [2025-09-24 05:47:02.672] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:47:02.672] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:47:03.280] INIT: version 2.96 booting [2025-09-24 05:47:03.392] INIT: Entering runlevel: 5 [2025-09-24 05:47:03.551] mtd24 attached [2025-09-24 05:47:03.551] mtd28 attached [2025-09-24 05:47:03.567] mtd32 attached [2025-09-24 05:47:03.615] ubi0:textures is mounted. [2025-09-24 05:47:03.615] RTNETLINK answers: File exists [2025-09-24 05:47:03.631] ubi1:animations is mounted. [2025-09-24 05:47:03.686] ubi2:dml_code is mounted. [2025-09-24 05:47:03.686] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:47:03.686] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:47:03.686] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:47:03.686] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:47:03.686] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:47:03.686] data.LB_FadeInType0=100 [2025-09-24 05:47:03.686] data.CHLH_FadeInType0=0 [2025-09-24 05:47:03.686] data.WU_FadeInDelay=0 [2025-09-24 05:47:03.686] max_time_out=0 [2025-09-24 05:47:03.686] No splash screen [2025-09-24 05:47:03.686] stop dss Done [2025-09-24 05:47:03.718] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:47:03.750] /dev/mem opened. [2025-09-24 05:47:03.750] Memory mapped at address 0xffff94de4000. [2025-09-24 05:47:03.750] Read at address 0x00600018 (0xffff94de4018): 0x00000000 [2025-09-24 05:47:03.750] Write at address 0x00600018 (0xffff94de4018): 0x00400040, readback 0x00400040 [2025-09-24 05:47:03.750] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:47:03.845] Loaded PowerVR consumer services. [2025-09-24 05:47:04.010] 512+0 records in [2025-09-24 05:47:04.010] 512+0 records out [2025-09-24 05:47:04.010] Waiting data available... [2025-09-24 05:47:04.042] Starting syslogd/klogd: done [2025-09-24 05:47:04.058] DML Start [2025-09-24 05:47:04.234] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:47:04.457] DML res1: 0 [2025-09-24 05:47:04.947] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:47:04.947] Read Success [2025-09-24 05:47:04.947] Verifying certificate... [2025-09-24 05:47:05.203] Verified OK [2025-09-24 05:47:05.218] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:47:06.929] Verified OK [2025-09-24 05:47:06.929] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:47:07.520] Verified OK [2025-09-24 05:47:07.520] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:47:10.060] fs.protected_hardlinks = 1 [2025-09-24 05:47:10.060] fs.protected_symlinks = 1 [2025-09-24 05:47:10.060] kernel.modules_disabled = 1 [2025-09-24 05:47:10.235] [2025-09-24 05:47:10.235] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:47:11.521] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:47:19.330] SBL1:1210.0.1.0 [2025-09-24 05:47:19.362] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:47:20.944] SBL2:1210.0.1.0 [2025-09-24 05:47:20.976] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:47:21.088] j-A [2025-09-24 05:47:28.460] The R5 Autosar Classic is running [2025-09-24 05:47:28.460] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:47:28.460] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:47:29.067] INIT: version 2.96 booting [2025-09-24 05:47:29.179] INIT: Entering runlevel: 5 [2025-09-24 05:47:29.322] mtd24 attached [2025-09-24 05:47:29.339] mtd28 attached [2025-09-24 05:47:29.355] mtd32 attached [2025-09-24 05:47:29.403] ubi0:textures is mounted. [2025-09-24 05:47:29.470] RTNETLINK answers: File exists [2025-09-24 05:47:29.470] ubi1:animations is mounted. [2025-09-24 05:47:29.470] ubi2:dml_code is mounted. [2025-09-24 05:47:29.470] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:47:29.470] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:47:29.470] data.LB_FadeInType0=100 [2025-09-24 05:47:29.470] data.CHLH_FadeInType0=0 [2025-09-24 05:47:29.470] data.WU_FadeInDelay=0 [2025-09-24 05:47:29.470] max_time_out=0 [2025-09-24 05:47:29.470] No splash screen [2025-09-24 05:47:29.470] stop dss Done [2025-09-24 05:47:29.470] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:47:29.470] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:47:29.470] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:47:29.525] /dev/mem opened. [2025-09-24 05:47:29.525] Memory mapped at address 0xffffaa44f000. [2025-09-24 05:47:29.525] Read at address 0x00600018 (0xffffaa44f018): 0x00000000 [2025-09-24 05:47:29.525] Write at address 0x00600018 (0xffffaa44f018): 0x00400040, readback 0x00400040 [2025-09-24 05:47:29.556] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:47:29.573] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:47:29.652] Loaded PowerVR consumer services. [2025-09-24 05:47:29.781] Waiting data available... [2025-09-24 05:47:29.797] 512+0 records in [2025-09-24 05:47:29.797] 512+0 records out [2025-09-24 05:47:29.828] Starting syslogd/klogd: done [2025-09-24 05:47:29.845] DML Start [2025-09-24 05:47:30.052] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:47:30.260] DML res1: 0 [2025-09-24 05:47:30.734] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:47:30.734] Read Success [2025-09-24 05:47:30.734] Verifying certificate... [2025-09-24 05:47:30.990] Verified OK [2025-09-24 05:47:30.990] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:47:32.669] Verified OK [2025-09-24 05:47:32.669] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:47:33.313] Verified OK [2025-09-24 05:47:33.313] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:47:35.807] fs.protected_hardlinks = 1 [2025-09-24 05:47:35.807] fs.protected_symlinks = 1 [2025-09-24 05:47:35.824] kernel.modules_disabled = 1 [2025-09-24 05:47:36.015] [2025-09-24 05:47:36.015] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:47:37.259] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:47:45.123] SBL1:1210.0.1.0 [2025-09-24 05:47:45.171] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:47:46.737] SBL2:1210.0.1.0 [2025-09-24 05:47:46.785] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:47:46.881] j-A [2025-09-24 05:47:54.235] The R5 Autosar Classic is running [2025-09-24 05:47:54.257] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:47:54.257] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:47:54.866] INIT: version 2.96 booting [2025-09-24 05:47:54.977] INIT: Entering runlevel: 5 [2025-09-24 05:47:55.137] mtd24 attached [2025-09-24 05:47:55.137] mtd28 attached [2025-09-24 05:47:55.169] ubi0:textures is mounted. [2025-09-24 05:47:55.169] mtd32 attached [2025-09-24 05:47:55.201] ubi1:animations is mounted. [2025-09-24 05:47:55.261] RTNETLINK answers: File exists [2025-09-24 05:47:55.261] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:47:55.261] ubi2:dml_code is mounted. [2025-09-24 05:47:55.261] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:47:55.261] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:47:55.261] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:47:55.261] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:47:55.261] data.LB_FadeInType0=100 [2025-09-24 05:47:55.261] data.CHLH_FadeInType0=0 [2025-09-24 05:47:55.261] data.WU_FadeInDelay=0 [2025-09-24 05:47:55.261] max_time_out=0 [2025-09-24 05:47:55.261] No splash screen [2025-09-24 05:47:55.261] stop dss Done [2025-09-24 05:47:55.338] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:47:55.338] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:47:55.338] /dev/mem opened. [2025-09-24 05:47:55.338] Memory mapped at address 0xffff90b66000. [2025-09-24 05:47:55.338] Read at address 0x00600018 (0xffff90b66018): 0x00000000 [2025-09-24 05:47:55.338] Write at address 0x00600018 (0xffff90b66018): 0x00400040, readback 0x00400040 [2025-09-24 05:47:55.466] Loaded PowerVR consumer services. [2025-09-24 05:47:55.578] Waiting data available... [2025-09-24 05:47:55.594] 512+0 records in [2025-09-24 05:47:55.594] 512+0 records out [2025-09-24 05:47:55.625] Starting syslogd/klogd: done [2025-09-24 05:47:55.658] DML Start [2025-09-24 05:47:55.818] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:47:56.026] DML res1: 0 [2025-09-24 05:47:56.473] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:47:56.473] Read Success [2025-09-24 05:47:56.473] Verifying certificate... [2025-09-24 05:47:56.697] Verified OK [2025-09-24 05:47:56.713] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:47:58.328] Verified OK [2025-09-24 05:47:58.344] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:47:58.887] Verified OK [2025-09-24 05:47:58.887] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:48:01.557] fs.protected_hardlinks = 1 [2025-09-24 05:48:01.573] fs.protected_symlinks = 1 [2025-09-24 05:48:01.573] kernel.modules_disabled = 1 [2025-09-24 05:48:01.750] [2025-09-24 05:48:01.750] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:48:03.092] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:48:10.896] SBL1:1210.0.1.0 [2025-09-24 05:48:10.944] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:48:12.510] SBL2:1210.0.1.0 [2025-09-24 05:48:12.558] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:48:12.654] j-A [2025-09-24 05:48:20.008] The R5 Autosar Classic is running [2025-09-24 05:48:20.033] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:48:20.033] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:48:20.641] INIT: version 2.96 booting [2025-09-24 05:48:20.753] INIT: Entering runlevel: 5 [2025-09-24 05:48:20.912] mtd28 attached [2025-09-24 05:48:20.928] mtd24 attached [2025-09-24 05:48:20.944] mtd32 attached [2025-09-24 05:48:20.960] ubi0:animations is mounted. [2025-09-24 05:48:21.026] RTNETLINK answers: File exists [2025-09-24 05:48:21.026] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:48:21.026] ubi1:textures is mounted. [2025-09-24 05:48:21.026] ubi2:dml_code is mounted. [2025-09-24 05:48:21.026] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:48:21.026] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:48:21.026] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:48:21.026] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:48:21.047] data.LB_FadeInType0=100 [2025-09-24 05:48:21.047] data.CHLH_FadeInType0=0 [2025-09-24 05:48:21.047] data.WU_FadeInDelay=0 [2025-09-24 05:48:21.047] max_time_out=0 [2025-09-24 05:48:21.047] No splash screen [2025-09-24 05:48:21.047] stop dss Done [2025-09-24 05:48:21.063] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:48:21.079] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:48:21.095] /dev/mem opened. [2025-09-24 05:48:21.095] Memory mapped at address 0xffff82306000. [2025-09-24 05:48:21.121] Read at address 0x00600018 (0xffff82306018): 0x00000000 [2025-09-24 05:48:21.121] Write at address 0x00600018 (0xffff82306018): 0x00400040, readback 0x00400040 [2025-09-24 05:48:21.248] Loaded PowerVR consumer services. [2025-09-24 05:48:21.361] Waiting data available... [2025-09-24 05:48:21.377] 512+0 records in [2025-09-24 05:48:21.377] 512+0 records out [2025-09-24 05:48:21.409] Starting syslogd/klogd: done [2025-09-24 05:48:21.425] DML Start [2025-09-24 05:48:21.552] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:48:21.824] DML res1: 0 [2025-09-24 05:48:22.295] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:48:22.295] Read Success [2025-09-24 05:48:22.295] Verifying certificate... [2025-09-24 05:48:22.535] Verified OK [2025-09-24 05:48:22.535] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:48:24.205] Verified OK [2025-09-24 05:48:24.205] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:48:24.781] Verified OK [2025-09-24 05:48:24.781] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:48:27.531] fs.protected_hardlinks = 1 [2025-09-24 05:48:27.531] fs.protected_symlinks = 1 [2025-09-24 05:48:27.547] kernel.modules_disabled = 1 [2025-09-24 05:48:27.738] [2025-09-24 05:48:27.738] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:48:28.916] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:48:36.712] SBL1:1210.0.1.0 [2025-09-24 05:48:36.744] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:48:38.327] SBL2:1210.0.1.0 [2025-09-24 05:48:38.359] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:48:38.471] j-A [2025-09-24 05:48:45.846] The R5 Autosar Classic is running [2025-09-24 05:48:45.846] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:48:45.846] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:48:46.454] INIT: version 2.96 booting [2025-09-24 05:48:46.549] INIT: Entering runlevel: 5 [2025-09-24 05:48:46.709] mtd28 attached [2025-09-24 05:48:46.725] mtd32 attached [2025-09-24 05:48:46.741] mtd24 attached [2025-09-24 05:48:46.773] ubi0:animations is mounted. [2025-09-24 05:48:46.789] RTNETLINK answers: File exists [2025-09-24 05:48:46.845] ubi1:dml_code is mounted. [2025-09-24 05:48:46.845] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:48:46.845] ubi2:textures is mounted. [2025-09-24 05:48:46.845] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:48:46.845] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:48:46.845] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:48:46.845] data.LB_FadeInType0=100 [2025-09-24 05:48:46.845] data.CHLH_FadeInType0=0 [2025-09-24 05:48:46.845] data.WU_FadeInDelay=0 [2025-09-24 05:48:46.845] max_time_out=0 [2025-09-24 05:48:46.845] No splash screen [2025-09-24 05:48:46.845] stop dss Done [2025-09-24 05:48:46.845] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:48:46.892] /dev/mem opened. [2025-09-24 05:48:46.918] Memory mapped at address 0xffffa1fc6000. [2025-09-24 05:48:46.918] Read at address 0x00600018 (0xffffa1fc6018): 0x00000000 [2025-09-24 05:48:46.918] Write at address 0x00600018 (0xffffa1fc6018): 0x00400040, readback 0x00400040 [2025-09-24 05:48:46.934] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:48:46.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:48:47.031] Loaded PowerVR consumer services. [2025-09-24 05:48:47.184] Waiting data available... [2025-09-24 05:48:47.184] 512+0 records in [2025-09-24 05:48:47.184] 512+0 records out [2025-09-24 05:48:47.216] Starting syslogd/klogd: done [2025-09-24 05:48:47.232] DML Start [2025-09-24 05:48:47.393] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:48:47.600] DML res1: 0 [2025-09-24 05:48:48.149] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:48:48.149] Read Success [2025-09-24 05:48:48.149] Verifying certificate... [2025-09-24 05:48:48.389] Verified OK [2025-09-24 05:48:48.405] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:48:50.035] Verified OK [2025-09-24 05:48:50.035] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:48:50.612] Verified OK [2025-09-24 05:48:50.612] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:48:53.186] fs.protected_hardlinks = 1 [2025-09-24 05:48:53.202] fs.protected_symlinks = 1 [2025-09-24 05:48:53.202] kernel.modules_disabled = 1 [2025-09-24 05:48:53.394] [2025-09-24 05:48:53.394] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:48:54.715] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:49:02.518] SBL1:1210.0.1.0 [2025-09-24 05:49:02.549] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:49:04.132] SBL2:1210.0.1.0 [2025-09-24 05:49:04.165] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:49:04.277] j-A [2025-09-24 05:49:11.646] The R5 Autosar Classic is running [2025-09-24 05:49:11.646] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:49:11.646] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:49:12.253] INIT: version 2.96 booting [2025-09-24 05:49:12.349] INIT: Entering runlevel: 5 [2025-09-24 05:49:12.509] mtd28 attached [2025-09-24 05:49:12.525] mtd32 attached [2025-09-24 05:49:12.525] mtd24 attached [2025-09-24 05:49:12.573] ubi0:animations is mounted. [2025-09-24 05:49:12.589] ubi1:dml_code is mounted. [2025-09-24 05:49:12.589] ubi2:textures is mounted. [2025-09-24 05:49:12.605] RTNETLINK answers: File exists [2025-09-24 05:49:12.654] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:49:12.654] data.LB_FadeInType0=100 [2025-09-24 05:49:12.654] data.CHLH_FadeInType0=0 [2025-09-24 05:49:12.654] data.WU_FadeInDelay=0 [2025-09-24 05:49:12.654] max_time_out=0 [2025-09-24 05:49:12.654] No splash screen [2025-09-24 05:49:12.654] stop dss Done [2025-09-24 05:49:12.654] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:49:12.654] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:49:12.654] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:49:12.654] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:49:12.727] /dev/mem opened. [2025-09-24 05:49:12.727] Memory mapped at address 0xffff8f6fe000. [2025-09-24 05:49:12.727] Read at address 0x00600018 (0xffff8f6fe018): 0x00000000 [2025-09-24 05:49:12.727] Write at address 0x00600018 (0xffff8f6fe018): 0x00400040, readback 0x00400040 [2025-09-24 05:49:12.727] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:49:12.727] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:49:12.839] Loaded PowerVR consumer services. [2025-09-24 05:49:12.966] Waiting data available... [2025-09-24 05:49:12.982] 512+0 records in [2025-09-24 05:49:12.982] 512+0 records out [2025-09-24 05:49:13.030] Starting syslogd/klogd: done [2025-09-24 05:49:13.046] DML Start [2025-09-24 05:49:13.238] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:49:13.462] DML res1: 0 [2025-09-24 05:49:13.925] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:49:13.941] Read Success [2025-09-24 05:49:13.941] Verifying certificate... [2025-09-24 05:49:14.181] Verified OK [2025-09-24 05:49:14.197] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:49:15.909] Verified OK [2025-09-24 05:49:15.909] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:49:16.529] Verified OK [2025-09-24 05:49:16.529] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:49:19.055] fs.protected_hardlinks = 1 [2025-09-24 05:49:19.082] fs.protected_symlinks = 1 [2025-09-24 05:49:19.082] kernel.modules_disabled = 1 [2025-09-24 05:49:19.274] [2025-09-24 05:49:19.274] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:49:20.564] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:49:28.317] SBL1:1210.0.1.0 [2025-09-24 05:49:28.349] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:49:29.931] SBL2:1210.0.1.0 [2025-09-24 05:49:29.963] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:49:30.075] j-A [2025-09-24 05:49:37.446] The R5 Autosar Classic is running [2025-09-24 05:49:37.446] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:49:37.446] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:49:38.053] INIT: version 2.96 booting [2025-09-24 05:49:38.165] INIT: Entering runlevel: 5 [2025-09-24 05:49:38.308] mtd24 attached [2025-09-24 05:49:38.340] mtd28 attached [2025-09-24 05:49:38.340] ubi0:textures is mounted. [2025-09-24 05:49:38.356] mtd32 attached [2025-09-24 05:49:38.388] ubi1:animations is mounted. [2025-09-24 05:49:38.388] RTNETLINK answers: File exists [2025-09-24 05:49:38.453] ubi2:dml_code is mounted. [2025-09-24 05:49:38.453] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:49:38.453] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:49:38.453] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:49:38.453] data.LB_FadeInType0=100 [2025-09-24 05:49:38.453] data.CHLH_FadeInType0=0 [2025-09-24 05:49:38.453] data.WU_FadeInDelay=0 [2025-09-24 05:49:38.453] max_time_out=0 [2025-09-24 05:49:38.453] No splash screen [2025-09-24 05:49:38.453] stop dss Done [2025-09-24 05:49:38.453] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:49:38.453] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:49:38.485] /dev/mem opened. [2025-09-24 05:49:38.517] Memory mapped at address 0xffffbe92d000. [2025-09-24 05:49:38.517] Read at address 0x00600018 (0xffffbe92d018): 0x00000000 [2025-09-24 05:49:38.517] Write at address 0x00600018 (0xffffbe92d018): 0x00400040, readback 0x00400040 [2025-09-24 05:49:38.565] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:49:38.596] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:49:38.660] Loaded PowerVR consumer services. [2025-09-24 05:49:38.788] Waiting data available... [2025-09-24 05:49:38.804] 512+0 records in [2025-09-24 05:49:38.804] 512+0 records out [2025-09-24 05:49:38.820] Starting syslogd/klogd: done [2025-09-24 05:49:38.852] DML Start [2025-09-24 05:49:38.996] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:49:39.220] DML res1: 0 [2025-09-24 05:49:39.775] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:49:39.775] Read Success [2025-09-24 05:49:39.775] Verifying certificate... [2025-09-24 05:49:40.079] Verified OK [2025-09-24 05:49:40.111] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:49:41.659] Verified OK [2025-09-24 05:49:41.659] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:49:42.273] Verified OK [2025-09-24 05:49:42.273] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:49:44.863] fs.protected_hardlinks = 1 [2025-09-24 05:49:44.863] fs.protected_symlinks = 1 [2025-09-24 05:49:44.863] kernel.modules_disabled = 1 [2025-09-24 05:49:45.038] [2025-09-24 05:49:45.038] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:49:46.292] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:49:54.115] SBL1:1210.0.1.0 [2025-09-24 05:49:54.147] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:49:55.730] SBL2:1210.0.1.0 [2025-09-24 05:49:55.762] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:49:55.874] j-A [2025-09-24 05:50:03.244] The R5 Autosar Classic is running [2025-09-24 05:50:03.244] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:50:03.244] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:50:03.851] INIT: version 2.96 booting [2025-09-24 05:50:03.964] INIT: Entering runlevel: 5 [2025-09-24 05:50:04.123] mtd24 attached [2025-09-24 05:50:04.123] mtd28 attached [2025-09-24 05:50:04.139] mtd32 attached [2025-09-24 05:50:04.187] ubi0:textures is mounted. [2025-09-24 05:50:04.187] RTNETLINK answers: File exists [2025-09-24 05:50:04.245] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:50:04.245] ubi1:animations is mounted. [2025-09-24 05:50:04.245] ubi2:dml_code is mounted. [2025-09-24 05:50:04.245] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:50:04.245] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:50:04.245] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:50:04.245] data.LB_FadeInType0=100 [2025-09-24 05:50:04.245] data.CHLH_FadeInType0=0 [2025-09-24 05:50:04.245] data.WU_FadeInDelay=0 [2025-09-24 05:50:04.245] max_time_out=0 [2025-09-24 05:50:04.245] No splash screen [2025-09-24 05:50:04.245] stop dss Done [2025-09-24 05:50:04.245] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:50:04.277] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:50:04.293] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:50:04.293] /dev/mem opened. [2025-09-24 05:50:04.324] Memory mapped at address 0xffffa1ec8000. [2025-09-24 05:50:04.324] Read at address 0x00600018 (0xffffa1ec8018): 0x00000000 [2025-09-24 05:50:04.324] Write at address 0x00600018 (0xffffa1ec8018): 0x00400040, readback 0x00400040 [2025-09-24 05:50:04.516] Loaded PowerVR consumer services. [2025-09-24 05:50:04.581] Waiting data available... [2025-09-24 05:50:04.613] 512+0 records in [2025-09-24 05:50:04.613] 512+0 records out [2025-09-24 05:50:04.628] Starting syslogd/klogd: done [2025-09-24 05:50:04.644] DML Start [2025-09-24 05:50:04.836] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:50:05.076] DML res1: 0 [2025-09-24 05:50:05.460] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:50:05.481] Read Success [2025-09-24 05:50:05.481] Verifying certificate... [2025-09-24 05:50:05.720] Verified OK [2025-09-24 05:50:05.737] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:50:07.399] Verified OK [2025-09-24 05:50:07.399] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:50:07.936] Verified OK [2025-09-24 05:50:07.936] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:50:10.685] fs.protected_hardlinks = 1 [2025-09-24 05:50:10.701] fs.protected_symlinks = 1 [2025-09-24 05:50:10.701] kernel.modules_disabled = 1 [2025-09-24 05:50:10.893] [2025-09-24 05:50:10.893] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:50:12.170] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:50:19.921] SBL1:1210.0.1.0 [2025-09-24 05:50:19.953] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:50:21.537] SBL2:1210.0.1.0 [2025-09-24 05:50:21.569] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:50:21.680] j-A [2025-09-24 05:50:29.051] The R5 Autosar Classic is running [2025-09-24 05:50:29.051] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:50:29.051] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:50:29.659] INIT: version 2.96 booting [2025-09-24 05:50:29.771] INIT: Entering runlevel: 5 [2025-09-24 05:50:29.914] mtd32 attached [2025-09-24 05:50:29.930] mtd24 attached [2025-09-24 05:50:29.946] mtd28 attached [2025-09-24 05:50:29.978] RTNETLINK answers: File exists [2025-09-24 05:50:30.050] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:50:30.050] ubi0:dml_code is mounted. [2025-09-24 05:50:30.050] ubi1:textures is mounted. [2025-09-24 05:50:30.050] ubi2:animations is mounted. [2025-09-24 05:50:30.050] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:50:30.050] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:50:30.050] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:50:30.050] data.LB_FadeInType0=100 [2025-09-24 05:50:30.050] data.CHLH_FadeInType0=0 [2025-09-24 05:50:30.050] data.WU_FadeInDelay=0 [2025-09-24 05:50:30.050] max_time_out=0 [2025-09-24 05:50:30.050] No splash screen [2025-09-24 05:50:30.050] stop dss Done [2025-09-24 05:50:30.050] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:50:30.118] /dev/mem opened. [2025-09-24 05:50:30.118] Memory mapped at address 0xffffb7170000. [2025-09-24 05:50:30.118] Read at address 0x00600018 (0xffffb7170018): 0x00000000 [2025-09-24 05:50:30.118] Write at address 0x00600018 (0xffffb7170018): 0x00400040, readback 0x00400040 [2025-09-24 05:50:30.118] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:50:30.133] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:50:30.277] Loaded PowerVR consumer services. [2025-09-24 05:50:30.373] Waiting data available... [2025-09-24 05:50:30.389] 512+0 records in [2025-09-24 05:50:30.389] 512+0 records out [2025-09-24 05:50:30.421] Starting syslogd/klogd: done [2025-09-24 05:50:30.437] DML Start [2025-09-24 05:50:30.613] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:50:30.837] DML res1: 0 [2025-09-24 05:50:31.220] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:50:31.236] Read Success [2025-09-24 05:50:31.236] Verifying certificate... [2025-09-24 05:50:31.477] Verified OK [2025-09-24 05:50:31.493] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:50:33.043] Verified OK [2025-09-24 05:50:33.043] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:50:33.695] Verified OK [2025-09-24 05:50:33.695] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:50:36.412] fs.protected_hardlinks = 1 [2025-09-24 05:50:36.428] fs.protected_symlinks = 1 [2025-09-24 05:50:36.428] kernel.modules_disabled = 1 [2025-09-24 05:50:36.603] [2025-09-24 05:50:36.603] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:50:37.974] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:50:45.727] SBL1:1210.0.1.0 [2025-09-24 05:50:45.775] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:50:47.341] SBL2:1210.0.1.0 [2025-09-24 05:50:47.389] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:50:47.485] j-A [2025-09-24 05:50:54.840] The R5 Autosar Classic is running [2025-09-24 05:50:54.864] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:50:54.864] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:50:55.472] INIT: version 2.96 booting [2025-09-24 05:50:55.584] INIT: Entering runlevel: 5 [2025-09-24 05:50:55.744] mtd24 attached [2025-09-24 05:50:55.744] mtd28 attached [2025-09-24 05:50:55.760] mtd32 attached [2025-09-24 05:50:55.808] RTNETLINK answers: File exists [2025-09-24 05:50:55.855] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:50:55.855] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:50:55.855] ubi0:textures is mounted. [2025-09-24 05:50:55.855] ubi2:dml_code is mounted. [2025-09-24 05:50:55.855] ubi1:animations is mounted. [2025-09-24 05:50:55.855] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:50:55.855] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:50:55.855] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:50:55.876] data.LB_FadeInType0=100 [2025-09-24 05:50:55.876] data.CHLH_FadeInType0=0 [2025-09-24 05:50:55.876] data.WU_FadeInDelay=0 [2025-09-24 05:50:55.876] max_time_out=0 [2025-09-24 05:50:55.876] No splash screen [2025-09-24 05:50:55.876] stop dss Done [2025-09-24 05:50:55.906] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:50:55.906] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:50:55.945] /dev/mem opened. [2025-09-24 05:50:55.945] Memory mapped at address 0xffffb3966000. [2025-09-24 05:50:55.945] Read at address 0x00600018 (0xffffb3966018): 0x00000000 [2025-09-24 05:50:55.945] Write at address 0x00600018 (0xffffb3966018): 0x00400040, readback 0x00400040 [2025-09-24 05:50:56.057] Loaded PowerVR consumer services. [2025-09-24 05:50:56.213] Waiting data available... [2025-09-24 05:50:56.213] 512+0 records in [2025-09-24 05:50:56.213] 512+0 records out [2025-09-24 05:50:56.245] Starting syslogd/klogd: done [2025-09-24 05:50:56.261] DML Start [2025-09-24 05:50:56.453] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:50:56.694] DML res1: 0 [2025-09-24 05:50:56.997] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:50:57.018] Read Success [2025-09-24 05:50:57.018] Verifying certificate... [2025-09-24 05:50:57.306] Verified OK [2025-09-24 05:50:57.322] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:50:59.016] Verified OK [2025-09-24 05:50:59.016] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:50:59.702] Verified OK [2025-09-24 05:50:59.702] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:51:02.292] fs.protected_hardlinks = 1 [2025-09-24 05:51:02.292] fs.protected_symlinks = 1 [2025-09-24 05:51:02.307] kernel.modules_disabled = 1 [2025-09-24 05:51:02.499] [2025-09-24 05:51:02.499] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:51:03.773] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:51:11.548] SBL1:1210.0.1.0 [2025-09-24 05:51:11.596] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:51:13.162] SBL2:1210.0.1.0 [2025-09-24 05:51:13.210] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:51:13.306] j-A [2025-09-24 05:51:20.663] The R5 Autosar Classic is running [2025-09-24 05:51:20.685] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:51:20.685] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:51:21.291] INIT: version 2.96 booting [2025-09-24 05:51:21.404] INIT: Entering runlevel: 5 [2025-09-24 05:51:21.564] mtd24 attached [2025-09-24 05:51:21.564] mtd28 attached [2025-09-24 05:51:21.580] mtd32 attached [2025-09-24 05:51:21.611] ubi0:textures is mounted. [2025-09-24 05:51:21.698] RTNETLINK answers: File exists [2025-09-24 05:51:21.698] ubi1:animations is mounted. [2025-09-24 05:51:21.698] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:51:21.698] ubi2:dml_code is mounted. [2025-09-24 05:51:21.698] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:51:21.698] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:51:21.698] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:51:21.698] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:51:21.698] data.LB_FadeInType0=100 [2025-09-24 05:51:21.698] data.CHLH_FadeInType0=0 [2025-09-24 05:51:21.698] data.WU_FadeInDelay=0 [2025-09-24 05:51:21.698] max_time_out=0 [2025-09-24 05:51:21.698] No splash screen [2025-09-24 05:51:21.698] stop dss Done [2025-09-24 05:51:21.729] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:51:21.746] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:51:21.785] /dev/mem opened. [2025-09-24 05:51:21.785] Memory mapped at address 0xffff96c14000. [2025-09-24 05:51:21.785] Read at address 0x00600018 (0xffff96c14018): 0x00000000 [2025-09-24 05:51:21.785] Write at address 0x00600018 (0xffff96c14018): 0x00400040, readback 0x00400040 [2025-09-24 05:51:21.849] Loaded PowerVR consumer services. [2025-09-24 05:51:22.008] Waiting data available... [2025-09-24 05:51:22.008] 512+0 records in [2025-09-24 05:51:22.008] 512+0 records out [2025-09-24 05:51:22.041] Starting syslogd/klogd: done [2025-09-24 05:51:22.057] DML Start [2025-09-24 05:51:22.264] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:51:22.472] DML res1: 0 [2025-09-24 05:51:22.936] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:51:22.957] Read Success [2025-09-24 05:51:22.957] Verifying certificate... [2025-09-24 05:51:23.212] Verified OK [2025-09-24 05:51:23.228] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:51:24.874] Verified OK [2025-09-24 05:51:24.874] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:51:25.496] Verified OK [2025-09-24 05:51:25.496] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:51:28.150] fs.protected_hardlinks = 1 [2025-09-24 05:51:28.150] fs.protected_symlinks = 1 [2025-09-24 05:51:28.166] kernel.modules_disabled = 1 [2025-09-24 05:51:28.358] [2025-09-24 05:51:28.358] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:51:29.546] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:51:37.350] SBL1:1210.0.1.0 [2025-09-24 05:51:37.398] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:51:38.965] SBL2:1210.0.1.0 [2025-09-24 05:51:39.013] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:51:39.109] j-A [2025-09-24 05:51:46.464] The R5 Autosar Classic is running [2025-09-24 05:51:46.464] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:51:46.485] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:51:47.093] INIT: version 2.96 booting [2025-09-24 05:51:47.205] INIT: Entering runlevel: 5 [2025-09-24 05:51:47.365] mtd28 attached [2025-09-24 05:51:47.381] mtd32 attached [2025-09-24 05:51:47.381] mtd24 attached [2025-09-24 05:51:47.502] RTNETLINK answers: File exists [2025-09-24 05:51:47.502] ubi0:animations is mounted. [2025-09-24 05:51:47.502] ubi2:textures is mounted. [2025-09-24 05:51:47.502] ubi1:dml_code is mounted. [2025-09-24 05:51:47.502] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:51:47.502] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:51:47.502] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:51:47.502] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:51:47.502] data.LB_FadeInType0=100 [2025-09-24 05:51:47.502] data.CHLH_FadeInType0=0 [2025-09-24 05:51:47.502] data.WU_FadeInDelay=0 [2025-09-24 05:51:47.502] max_time_out=0 [2025-09-24 05:51:47.502] No splash screen [2025-09-24 05:51:47.502] stop dss Done [2025-09-24 05:51:47.502] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:51:47.533] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:51:47.549] /dev/mem opened. [2025-09-24 05:51:47.549] Memory mapped at address 0xffff8df9d000. [2025-09-24 05:51:47.581] Read at address 0x00600018 (0xffff8df9d018): 0x00000000 [2025-09-24 05:51:47.581] Write at address 0x00600018 (0xffff8df9d018): 0x00400040, readback 0x00400040 [2025-09-24 05:51:47.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:51:47.661] Loaded PowerVR consumer services. [2025-09-24 05:51:47.821] 512+0 records in [2025-09-24 05:51:47.821] 512+0 records out [2025-09-24 05:51:47.837] Waiting data available... [2025-09-24 05:51:47.869] Starting syslogd/klogd: done [2025-09-24 05:51:47.885] DML Start [2025-09-24 05:51:48.044] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:51:48.237] DML res1: 0 [2025-09-24 05:51:48.700] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:51:48.721] Read Success [2025-09-24 05:51:48.721] Verifying certificate... [2025-09-24 05:51:48.945] Verified OK [2025-09-24 05:51:48.961] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:51:50.527] Verified OK [2025-09-24 05:51:50.527] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:51:51.150] Verified OK [2025-09-24 05:51:51.150] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:51:54.012] fs.protected_hardlinks = 1 [2025-09-24 05:51:54.028] fs.protected_symlinks = 1 [2025-09-24 05:51:54.028] kernel.modules_disabled = 1 [2025-09-24 05:51:54.236] [2025-09-24 05:51:54.236] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:51:55.377] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:52:03.141] SBL1:1210.0.1.0 [2025-09-24 05:52:03.173] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:52:04.756] SBL2:1210.0.1.0 [2025-09-24 05:52:04.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:52:04.900] j-A [2025-09-24 05:52:12.274] The R5 Autosar Classic is running [2025-09-24 05:52:12.274] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:52:12.274] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:52:12.881] INIT: version 2.96 booting [2025-09-24 05:52:12.993] INIT: Entering runlevel: 5 [2025-09-24 05:52:13.152] mtd28 attached [2025-09-24 05:52:13.152] mtd24 attached [2025-09-24 05:52:13.168] mtd32 attached [2025-09-24 05:52:13.217] ubi1:textures is mounted. [2025-09-24 05:52:13.217] ubi0:animations is mounted. [2025-09-24 05:52:13.233] RTNETLINK answers: File exists [2025-09-24 05:52:13.233] ubi2:dml_code is mounted. [2025-09-24 05:52:13.286] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:52:13.286] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:52:13.286] data.LB_FadeInType0=100 [2025-09-24 05:52:13.286] data.CHLH_FadeInType0=0 [2025-09-24 05:52:13.286] data.WU_FadeInDelay=0 [2025-09-24 05:52:13.286] max_time_out=0 [2025-09-24 05:52:13.286] No splash screen [2025-09-24 05:52:13.286] stop dss Done [2025-09-24 05:52:13.286] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:52:13.286] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:52:13.286] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:52:13.344] /dev/mem opened. [2025-09-24 05:52:13.344] Memory mapped at address 0xffff8c5f1000. [2025-09-24 05:52:13.344] Read at address 0x00600018 (0xffff8c5f1018): 0x00000000 [2025-09-24 05:52:13.344] Write at address 0x00600018 (0xffff8c5f1018): 0x00400040, readback 0x00400040 [2025-09-24 05:52:13.408] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:52:13.408] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:52:13.536] Loaded PowerVR consumer services. [2025-09-24 05:52:13.628] 512+0 records in [2025-09-24 05:52:13.628] 512+0 records out [2025-09-24 05:52:13.628] Waiting data available... [2025-09-24 05:52:13.660] Starting syslogd/klogd: done [2025-09-24 05:52:13.676] DML Start [2025-09-24 05:52:13.836] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:52:14.108] DML res1: 0 [2025-09-24 05:52:14.536] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:52:14.536] Read Success [2025-09-24 05:52:14.536] Verifying certificate... [2025-09-24 05:52:14.760] Verified OK [2025-09-24 05:52:14.776] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:52:16.455] Verified OK [2025-09-24 05:52:16.455] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:52:17.174] Verified OK [2025-09-24 05:52:17.174] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:52:19.716] fs.protected_hardlinks = 1 [2025-09-24 05:52:19.716] fs.protected_symlinks = 1 [2025-09-24 05:52:19.732] kernel.modules_disabled = 1 [2025-09-24 05:52:19.923] [2025-09-24 05:52:19.923] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:52:21.155] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:52:28.940] SBL1:1210.0.1.0 [2025-09-24 05:52:28.988] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:52:30.554] SBL2:1210.0.1.0 [2025-09-24 05:52:30.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:52:30.697] j-A [2025-09-24 05:52:38.052] The R5 Autosar Classic is running [2025-09-24 05:52:38.073] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:52:38.073] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:52:38.681] INIT: version 2.96 booting [2025-09-24 05:52:38.793] INIT: Entering runlevel: 5 [2025-09-24 05:52:38.953] mtd24 attached [2025-09-24 05:52:38.953] mtd28 attached [2025-09-24 05:52:38.969] mtd32 attached [2025-09-24 05:52:39.017] ubi0:textures is mounted. [2025-09-24 05:52:39.083] ubi1:animations is mounted. [2025-09-24 05:52:39.083] RTNETLINK answers: File exists [2025-09-24 05:52:39.083] ubi2:dml_code is mounted. [2025-09-24 05:52:39.083] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:52:39.083] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:52:39.083] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:52:39.083] data.LB_FadeInType0=100 [2025-09-24 05:52:39.083] data.CHLH_FadeInType0=0 [2025-09-24 05:52:39.083] data.WU_FadeInDelay=0 [2025-09-24 05:52:39.083] max_time_out=0 [2025-09-24 05:52:39.083] No splash screen [2025-09-24 05:52:39.083] stop dss Done [2025-09-24 05:52:39.083] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:52:39.083] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:52:39.154] /dev/mem opened. [2025-09-24 05:52:39.154] Memory mapped at address 0xffffa0d7e000. [2025-09-24 05:52:39.154] Read at address 0x00600018 (0xffffa0d7e018): 0x00000000 [2025-09-24 05:52:39.154] Write at address 0x00600018 (0xffffa0d7e018): 0x00400040, readback 0x00400040 [2025-09-24 05:52:39.170] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:52:39.186] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:52:39.267] Loaded PowerVR consumer services. [2025-09-24 05:52:39.425] Waiting data available... [2025-09-24 05:52:39.425] 512+0 records in [2025-09-24 05:52:39.425] 512+0 records out [2025-09-24 05:52:39.457] Starting syslogd/klogd: done [2025-09-24 05:52:39.473] DML Start [2025-09-24 05:52:39.634] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:52:39.858] DML res1: 0 [2025-09-24 05:52:40.316] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:52:40.316] Read Success [2025-09-24 05:52:40.316] Verifying certificate... [2025-09-24 05:52:40.539] Verified OK [2025-09-24 05:52:40.555] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:52:42.273] Verified OK [2025-09-24 05:52:42.273] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:52:42.936] Verified OK [2025-09-24 05:52:42.936] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:52:45.478] fs.protected_hardlinks = 1 [2025-09-24 05:52:45.494] fs.protected_symlinks = 1 [2025-09-24 05:52:45.494] kernel.modules_disabled = 1 [2025-09-24 05:52:45.686] [2025-09-24 05:52:45.686] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:52:46.981] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:52:54.719] SBL1:1210.0.1.0 [2025-09-24 05:52:54.767] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:52:56.335] SBL2:1210.0.1.0 [2025-09-24 05:52:56.383] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:52:56.478] j-A [2025-09-24 05:53:03.832] The R5 Autosar Classic is running [2025-09-24 05:53:03.855] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:53:03.855] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:53:04.463] INIT: version 2.96 booting [2025-09-24 05:53:04.574] INIT: Entering runlevel: 5 [2025-09-24 05:53:04.735] mtd24 attached [2025-09-24 05:53:04.751] mtd32 attached [2025-09-24 05:53:04.767] mtd28 attached [2025-09-24 05:53:04.783] ubi0:textures is mounted. [2025-09-24 05:53:04.849] ubi1:dml_code is mounted. [2025-09-24 05:53:04.849] RTNETLINK answers: File exists [2025-09-24 05:53:04.849] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:53:04.849] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:53:04.849] ubi2:animations is mounted. [2025-09-24 05:53:04.849] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:53:04.849] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:53:04.849] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:53:04.849] data.LB_FadeInType0=100 [2025-09-24 05:53:04.849] data.CHLH_FadeInType0=0 [2025-09-24 05:53:04.870] data.WU_FadeInDelay=0 [2025-09-24 05:53:04.870] max_time_out=0 [2025-09-24 05:53:04.870] No splash screen [2025-09-24 05:53:04.870] stop dss Done [2025-09-24 05:53:04.918] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:53:04.918] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:53:04.918] /dev/mem opened. [2025-09-24 05:53:04.918] Memory mapped at address 0xffff8f750000. [2025-09-24 05:53:04.944] Read at address 0x00600018 (0xffff8f750018): 0x00000000 [2025-09-24 05:53:04.944] Write at address 0x00600018 (0xffff8f750018): 0x00400040, readback 0x00400040 [2025-09-24 05:53:05.055] Loaded PowerVR consumer services. [2025-09-24 05:53:05.199] Waiting data available... [2025-09-24 05:53:05.215] 512+0 records in [2025-09-24 05:53:05.215] 512+0 records out [2025-09-24 05:53:05.231] Starting syslogd/klogd: done [2025-09-24 05:53:05.247] DML Start [2025-09-24 05:53:05.455] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:53:05.663] DML res1: 0 [2025-09-24 05:53:06.045] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:53:06.045] Read Success [2025-09-24 05:53:06.045] Verifying certificate... [2025-09-24 05:53:06.285] Verified OK [2025-09-24 05:53:06.301] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:53:07.942] Verified OK [2025-09-24 05:53:07.942] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:53:08.613] Verified OK [2025-09-24 05:53:08.613] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:53:11.347] fs.protected_hardlinks = 1 [2025-09-24 05:53:11.363] fs.protected_symlinks = 1 [2025-09-24 05:53:11.363] kernel.modules_disabled = 1 [2025-09-24 05:53:11.555] [2025-09-24 05:53:11.555] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:53:12.778] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:53:20.544] SBL1:1210.0.1.0 [2025-09-24 05:53:20.576] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:53:22.159] SBL2:1210.0.1.0 [2025-09-24 05:53:22.191] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:53:22.303] j-A [2025-09-24 05:53:29.673] The R5 Autosar Classic is running [2025-09-24 05:53:29.673] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:53:29.673] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:53:30.281] INIT: version 2.96 booting [2025-09-24 05:53:30.393] INIT: Entering runlevel: 5 [2025-09-24 05:53:30.536] mtd32 attached [2025-09-24 05:53:30.552] mtd24 attached [2025-09-24 05:53:30.552] mtd28 attached [2025-09-24 05:53:30.584] ubi0:dml_code is mounted. [2025-09-24 05:53:30.650] RTNETLINK answers: File exists [2025-09-24 05:53:30.650] ubi1:textures is mounted. [2025-09-24 05:53:30.650] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:53:30.650] ubi2:animations is mounted. [2025-09-24 05:53:30.650] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:53:30.650] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:53:30.650] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:53:30.650] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:53:30.650] data.LB_FadeInType0=100 [2025-09-24 05:53:30.671] data.CHLH_FadeInType0=0 [2025-09-24 05:53:30.671] data.WU_FadeInDelay=0 [2025-09-24 05:53:30.671] max_time_out=0 [2025-09-24 05:53:30.671] No splash screen [2025-09-24 05:53:30.671] stop dss Done [2025-09-24 05:53:30.714] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:53:30.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:53:30.756] /dev/mem opened. [2025-09-24 05:53:30.756] Memory mapped at address 0xffffa7aec000. [2025-09-24 05:53:30.756] Read at address 0x00600018 (0xffffa7aec018): 0x00000000 [2025-09-24 05:53:30.756] Write at address 0x00600018 (0xffffa7aec018): 0x00400040, readback 0x00400040 [2025-09-24 05:53:30.819] Loaded PowerVR consumer services. [2025-09-24 05:53:31.008] Waiting data available... [2025-09-24 05:53:31.008] 512+0 records in [2025-09-24 05:53:31.008] 512+0 records out [2025-09-24 05:53:31.040] Starting syslogd/klogd: done [2025-09-24 05:53:31.056] DML Start [2025-09-24 05:53:31.232] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:53:31.472] DML res1: 0 [2025-09-24 05:53:31.949] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:53:31.949] Read Success [2025-09-24 05:53:31.949] Verifying certificate... [2025-09-24 05:53:32.174] Verified OK [2025-09-24 05:53:32.190] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:53:33.901] Verified OK [2025-09-24 05:53:33.901] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:53:34.529] Verified OK [2025-09-24 05:53:34.529] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:53:37.183] fs.protected_hardlinks = 1 [2025-09-24 05:53:37.183] fs.protected_symlinks = 1 [2025-09-24 05:53:37.199] kernel.modules_disabled = 1 [2025-09-24 05:53:37.391] [2025-09-24 05:53:37.391] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:53:38.619] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:53:46.331] SBL1:1210.0.1.0 [2025-09-24 05:53:46.363] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:53:47.946] SBL2:1210.0.1.0 [2025-09-24 05:53:47.978] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:53:48.090] j-A [2025-09-24 05:53:55.463] The R5 Autosar Classic is running [2025-09-24 05:53:55.463] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:53:55.463] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:53:56.070] INIT: version 2.96 booting [2025-09-24 05:53:56.182] INIT: Entering runlevel: 5 [2025-09-24 05:53:56.325] mtd24 attached [2025-09-24 05:53:56.341] mtd32 attached [2025-09-24 05:53:56.357] mtd28 attached [2025-09-24 05:53:56.389] ubi0:textures is mounted. [2025-09-24 05:53:56.405] ubi1:dml_code is mounted. [2025-09-24 05:53:56.467] RTNETLINK answers: File exists [2025-09-24 05:53:56.467] ubi2:animations is mounted. [2025-09-24 05:53:56.467] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:53:56.467] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:53:56.467] data.LB_FadeInType0=100 [2025-09-24 05:53:56.467] data.CHLH_FadeInType0=0 [2025-09-24 05:53:56.467] data.WU_FadeInDelay=0 [2025-09-24 05:53:56.467] max_time_out=0 [2025-09-24 05:53:56.467] No splash screen [2025-09-24 05:53:56.467] stop dss Done [2025-09-24 05:53:56.467] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:53:56.467] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:53:56.467] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:53:56.499] /dev/mem opened. [2025-09-24 05:53:56.499] Memory mapped at address 0xffff9a64e000. [2025-09-24 05:53:56.525] Read at address 0x00600018 (0xffff9a64e018): 0x00000000 [2025-09-24 05:53:56.525] Write at address 0x00600018 (0xffff9a64e018): 0x00400040, readback 0x00400040 [2025-09-24 05:53:56.553] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:53:56.553] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:53:56.793] Loaded PowerVR consumer services. [2025-09-24 05:53:56.809] Waiting data available... [2025-09-24 05:53:56.825] 512+0 records in [2025-09-24 05:53:56.825] 512+0 records out [2025-09-24 05:53:56.841] Starting syslogd/klogd: done [2025-09-24 05:53:56.857] DML Start [2025-09-24 05:53:57.081] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:53:57.304] DML res1: 0 [2025-09-24 05:53:57.721] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:53:57.737] Read Success [2025-09-24 05:53:57.737] Verifying certificate... [2025-09-24 05:53:57.960] Verified OK [2025-09-24 05:53:57.976] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:53:59.655] Verified OK [2025-09-24 05:53:59.655] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:54:00.278] Verified OK [2025-09-24 05:54:00.294] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:54:02.916] fs.protected_hardlinks = 1 [2025-09-24 05:54:02.916] fs.protected_symlinks = 1 [2025-09-24 05:54:02.932] kernel.modules_disabled = 1 [2025-09-24 05:54:03.124] [2025-09-24 05:54:03.124] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:54:04.353] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:54:12.138] SBL1:1210.0.1.0 [2025-09-24 05:54:12.170] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:54:13.752] SBL2:1210.0.1.0 [2025-09-24 05:54:13.784] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:54:13.897] j-A [2025-09-24 05:54:21.271] The R5 Autosar Classic is running [2025-09-24 05:54:21.271] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:54:21.271] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:54:21.878] INIT: version 2.96 booting [2025-09-24 05:54:21.990] INIT: Entering runlevel: 5 [2025-09-24 05:54:22.149] mtd28 attached [2025-09-24 05:54:22.149] mtd24 attached [2025-09-24 05:54:22.182] ubi0:animations is mounted. [2025-09-24 05:54:22.182] mtd32 attached [2025-09-24 05:54:22.214] ubi1:textures is mounted. [2025-09-24 05:54:22.214] RTNETLINK answers: File exists [2025-09-24 05:54:22.255] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:54:22.255] ubi2:dml_code is mounted. [2025-09-24 05:54:22.255] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:54:22.255] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:54:22.255] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:54:22.255] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:54:22.276] data.LB_FadeInType0=100 [2025-09-24 05:54:22.276] data.CHLH_FadeInType0=0 [2025-09-24 05:54:22.276] data.WU_FadeInDelay=0 [2025-09-24 05:54:22.276] max_time_out=0 [2025-09-24 05:54:22.276] No splash screen [2025-09-24 05:54:22.276] stop dss Done [2025-09-24 05:54:22.320] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:54:22.320] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:54:22.358] /dev/mem opened. [2025-09-24 05:54:22.358] Memory mapped at address 0xffffa7ad0000. [2025-09-24 05:54:22.358] Read at address 0x00600018 (0xffffa7ad0018): 0x00000000 [2025-09-24 05:54:22.358] Write at address 0x00600018 (0xffffa7ad0018): 0x00400040, readback 0x00400040 [2025-09-24 05:54:22.581] Loaded PowerVR consumer services. [2025-09-24 05:54:22.597] Waiting data available... [2025-09-24 05:54:22.629] 512+0 records in [2025-09-24 05:54:22.629] 512+0 records out [2025-09-24 05:54:22.645] Starting syslogd/klogd: done [2025-09-24 05:54:22.678] DML Start [2025-09-24 05:54:22.837] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:54:23.013] DML res1: 0 [2025-09-24 05:54:23.604] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:54:23.604] Read Success [2025-09-24 05:54:23.604] Verifying certificate... [2025-09-24 05:54:23.828] Verified OK [2025-09-24 05:54:23.844] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:54:25.377] Verified OK [2025-09-24 05:54:25.377] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:54:25.969] Verified OK [2025-09-24 05:54:25.969] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:54:28.635] fs.protected_hardlinks = 1 [2025-09-24 05:54:28.635] fs.protected_symlinks = 1 [2025-09-24 05:54:28.635] kernel.modules_disabled = 1 [2025-09-24 05:54:28.811] [2025-09-24 05:54:28.811] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:54:30.160] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:54:37.942] SBL1:1210.0.1.0 [2025-09-24 05:54:37.974] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:54:39.557] SBL2:1210.0.1.0 [2025-09-24 05:54:39.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:54:39.701] j-A [2025-09-24 05:54:47.074] The R5 Autosar Classic is running [2025-09-24 05:54:47.074] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:54:47.074] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:54:47.682] INIT: version 2.96 booting [2025-09-24 05:54:47.793] INIT: Entering runlevel: 5 [2025-09-24 05:54:47.937] mtd24 attached [2025-09-24 05:54:47.953] mtd28 attached [2025-09-24 05:54:47.969] mtd32 attached [2025-09-24 05:54:48.051] RTNETLINK answers: File exists [2025-09-24 05:54:48.051] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:54:48.051] ubi0:textures is mounted. [2025-09-24 05:54:48.051] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:54:48.051] ubi2:dml_code is mounted. [2025-09-24 05:54:48.051] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:54:48.051] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:54:48.051] ubi1:animations is mounted. [2025-09-24 05:54:48.051] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:54:48.075] data.LB_FadeInType0=100 [2025-09-24 05:54:48.075] data.CHLH_FadeInType0=0 [2025-09-24 05:54:48.075] data.WU_FadeInDelay=0 [2025-09-24 05:54:48.075] max_time_out=0 [2025-09-24 05:54:48.075] No splash screen [2025-09-24 05:54:48.075] stop dss Done [2025-09-24 05:54:48.146] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:54:48.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:54:48.146] /dev/mem opened. [2025-09-24 05:54:48.146] Memory mapped at address 0xffff881ad000. [2025-09-24 05:54:48.146] Read at address 0x00600018 (0xffff881ad018): 0x00000000 [2025-09-24 05:54:48.146] Write at address 0x00600018 (0xffff881ad018): 0x00400040, readback 0x00400040 [2025-09-24 05:54:48.242] Loaded PowerVR consumer services. [2025-09-24 05:54:48.386] Waiting data available... [2025-09-24 05:54:48.402] 512+0 records in [2025-09-24 05:54:48.402] 512+0 records out [2025-09-24 05:54:48.449] Starting syslogd/klogd: done [2025-09-24 05:54:48.482] DML Start [2025-09-24 05:54:48.690] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:54:48.914] DML res1: 0 [2025-09-24 05:54:49.313] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:54:49.334] Read Success [2025-09-24 05:54:49.334] Verifying certificate... [2025-09-24 05:54:49.574] Verified OK [2025-09-24 05:54:49.574] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:54:51.169] Verified OK [2025-09-24 05:54:51.169] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:54:51.798] Verified OK [2025-09-24 05:54:51.798] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:54:54.484] fs.protected_hardlinks = 1 [2025-09-24 05:54:54.499] fs.protected_symlinks = 1 [2025-09-24 05:54:54.499] kernel.modules_disabled = 1 [2025-09-24 05:54:54.692] [2025-09-24 05:54:54.692] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:54:55.964] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:55:03.774] SBL1:1210.0.1.0 [2025-09-24 05:55:03.806] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:55:05.388] SBL2:1210.0.1.0 [2025-09-24 05:55:05.420] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:55:05.533] j-A [2025-09-24 05:55:12.903] The R5 Autosar Classic is running [2025-09-24 05:55:12.903] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:55:12.903] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:55:13.510] INIT: version 2.96 booting [2025-09-24 05:55:13.623] INIT: Entering runlevel: 5 [2025-09-24 05:55:13.782] mtd28 attached [2025-09-24 05:55:13.782] mtd24 attached [2025-09-24 05:55:13.798] mtd32 attached [2025-09-24 05:55:13.846] ubi0:animations is mounted. [2025-09-24 05:55:13.846] RTNETLINK answers: File exists [2025-09-24 05:55:13.894] ubi1:textures is mounted. [2025-09-24 05:55:13.894] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:55:13.894] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:55:13.894] ubi2:dml_code is mounted. [2025-09-24 05:55:13.894] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:55:13.894] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:55:13.894] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:55:13.922] data.LB_FadeInType0=100 [2025-09-24 05:55:13.922] data.CHLH_FadeInType0=0 [2025-09-24 05:55:13.922] data.WU_FadeInDelay=0 [2025-09-24 05:55:13.922] max_time_out=0 [2025-09-24 05:55:13.922] No splash screen [2025-09-24 05:55:13.922] stop dss Done [2025-09-24 05:55:13.978] /dev/mem opened. [2025-09-24 05:55:13.978] Memory mapped at address 0xffffbf546000. [2025-09-24 05:55:13.978] Read at address 0x00600018 (0xffffbf546018): 0x00000000 [2025-09-24 05:55:13.978] Write at address 0x00600018 (0xffffbf546018): 0x00400040, readback 0x00400040 [2025-09-24 05:55:13.978] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:55:13.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:55:14.122] Loaded PowerVR consumer services. [2025-09-24 05:55:14.250] Waiting data available... [2025-09-24 05:55:14.266] 512+0 records in [2025-09-24 05:55:14.266] 512+0 records out [2025-09-24 05:55:14.298] Starting syslogd/klogd: done [2025-09-24 05:55:14.314] DML Start [2025-09-24 05:55:14.522] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:55:14.729] DML res1: 0 [2025-09-24 05:55:15.145] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:55:15.161] Read Success [2025-09-24 05:55:15.161] Verifying certificate... [2025-09-24 05:55:15.401] Verified OK [2025-09-24 05:55:15.416] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:55:17.094] Verified OK [2025-09-24 05:55:17.094] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:55:17.743] Verified OK [2025-09-24 05:55:17.743] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:55:20.363] fs.protected_hardlinks = 1 [2025-09-24 05:55:20.363] fs.protected_symlinks = 1 [2025-09-24 05:55:20.363] kernel.modules_disabled = 1 [2025-09-24 05:55:20.539] [2025-09-24 05:55:20.539] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:55:21.834] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:55:29.595] SBL1:1210.0.1.0 [2025-09-24 05:55:29.642] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:55:31.209] SBL2:1210.0.1.0 [2025-09-24 05:55:31.241] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:55:31.353] j-A [2025-09-24 05:55:38.730] The R5 Autosar Classic is running [2025-09-24 05:55:38.730] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:55:38.730] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:55:39.337] INIT: version 2.96 booting [2025-09-24 05:55:39.434] INIT: Entering runlevel: 5 [2025-09-24 05:55:39.593] mtd28 attached [2025-09-24 05:55:39.609] mtd24 attached [2025-09-24 05:55:39.609] mtd32 attached [2025-09-24 05:55:39.672] ubi0:animations is mounted. [2025-09-24 05:55:39.672] ubi1:textures is mounted. [2025-09-24 05:55:39.672] RTNETLINK answers: File exists [2025-09-24 05:55:39.672] ubi2:dml_code is mounted. [2025-09-24 05:55:39.698] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:55:39.698] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:55:39.698] data.LB_FadeInType0=100 [2025-09-24 05:55:39.698] data.CHLH_FadeInType0=0 [2025-09-24 05:55:39.730] data.WU_FadeInDelay=0 [2025-09-24 05:55:39.730] max_time_out=0 [2025-09-24 05:55:39.730] No splash screen [2025-09-24 05:55:39.730] stop dss Done [2025-09-24 05:55:39.730] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:55:39.730] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:55:39.730] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:55:39.762] /dev/mem opened. [2025-09-24 05:55:39.762] Memory mapped at address 0xffff85fc1000. [2025-09-24 05:55:39.800] Read at address 0x00600018 (0xffff85fc1018): 0x00000000 [2025-09-24 05:55:39.800] Write at address 0x00600018 (0xffff85fc1018): 0x00400040, readback 0x00400040 [2025-09-24 05:55:39.800] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:55:39.800] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:55:40.055] Loaded PowerVR consumer services. [2025-09-24 05:55:40.071] Waiting data available... [2025-09-24 05:55:40.087] 512+0 records in [2025-09-24 05:55:40.087] 512+0 records out [2025-09-24 05:55:40.135] Starting syslogd/klogd: done [2025-09-24 05:55:40.151] DML Start [2025-09-24 05:55:40.295] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:55:40.535] DML res1: 0 [2025-09-24 05:55:40.934] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:55:40.955] Read Success [2025-09-24 05:55:40.955] Verifying certificate... [2025-09-24 05:55:41.179] Verified OK [2025-09-24 05:55:41.196] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:55:42.904] Verified OK [2025-09-24 05:55:42.904] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:55:43.463] Verified OK [2025-09-24 05:55:43.479] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:55:46.101] fs.protected_hardlinks = 1 [2025-09-24 05:55:46.101] fs.protected_symlinks = 1 [2025-09-24 05:55:46.117] kernel.modules_disabled = 1 [2025-09-24 05:55:46.309] [2025-09-24 05:55:46.309] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:55:47.572] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:55:55.388] SBL1:1210.0.1.0 [2025-09-24 05:55:55.420] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:55:57.004] SBL2:1210.0.1.0 [2025-09-24 05:55:57.036] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:55:57.147] j-A [2025-09-24 05:56:04.487] The R5 Autosar Classic is running [2025-09-24 05:56:04.518] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:56:04.518] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:56:05.126] INIT: version 2.96 booting [2025-09-24 05:56:05.237] INIT: Entering runlevel: 5 [2025-09-24 05:56:05.381] mtd24 attached [2025-09-24 05:56:05.397] mtd28 attached [2025-09-24 05:56:05.413] mtd32 attached [2025-09-24 05:56:05.445] ubi0:textures is mounted. [2025-09-24 05:56:05.461] RTNETLINK answers: File exists [2025-09-24 05:56:05.521] ubi1:animations is mounted. [2025-09-24 05:56:05.521] ubi2:dml_code is mounted. [2025-09-24 05:56:05.521] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:56:05.521] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:56:05.521] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:56:05.521] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:56:05.521] data.LB_FadeInType0=100 [2025-09-24 05:56:05.521] data.CHLH_FadeInType0=0 [2025-09-24 05:56:05.521] data.WU_FadeInDelay=0 [2025-09-24 05:56:05.521] max_time_out=0 [2025-09-24 05:56:05.521] No splash screen [2025-09-24 05:56:05.521] stop dss Done [2025-09-24 05:56:05.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:56:05.553] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:56:05.569] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:56:05.606] /dev/mem opened. [2025-09-24 05:56:05.606] Memory mapped at address 0xffff84181000. [2025-09-24 05:56:05.606] Read at address 0x00600018 (0xffff84181018): 0x00000000 [2025-09-24 05:56:05.606] Write at address 0x00600018 (0xffff84181018): 0x00400040, readback 0x00400040 [2025-09-24 05:56:05.670] Loaded PowerVR consumer services. [2025-09-24 05:56:05.845] Waiting data available... [2025-09-24 05:56:05.861] 512+0 records in [2025-09-24 05:56:05.861] 512+0 records out [2025-09-24 05:56:05.925] Starting syslogd/klogd: done [2025-09-24 05:56:05.941] DML Start [2025-09-24 05:56:06.101] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:56:06.341] DML res1: 0 [2025-09-24 05:56:06.741] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:56:06.757] Read Success [2025-09-24 05:56:06.757] Verifying certificate... [2025-09-24 05:56:07.044] Verified OK [2025-09-24 05:56:07.060] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:56:08.702] Verified OK [2025-09-24 05:56:08.702] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:56:09.337] Verified OK [2025-09-24 05:56:09.337] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:56:11.991] fs.protected_hardlinks = 1 [2025-09-24 05:56:12.007] fs.protected_symlinks = 1 [2025-09-24 05:56:12.007] kernel.modules_disabled = 1 [2025-09-24 05:56:12.184] [2025-09-24 05:56:12.184] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:56:13.396] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:56:21.179] SBL1:1210.0.1.0 [2025-09-24 05:56:21.227] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:56:22.794] SBL2:1210.0.1.0 [2025-09-24 05:56:22.843] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:56:22.938] j-A [2025-09-24 05:56:30.293] The R5 Autosar Classic is running [2025-09-24 05:56:30.293] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:56:30.314] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:56:30.922] INIT: version 2.96 booting [2025-09-24 05:56:31.034] INIT: Entering runlevel: 5 [2025-09-24 05:56:31.194] mtd32 attached [2025-09-24 05:56:31.210] mtd24 attached [2025-09-24 05:56:31.226] mtd28 attached [2025-09-24 05:56:31.258] ubi0:dml_code is mounted. [2025-09-24 05:56:31.327] RTNETLINK answers: File exists [2025-09-24 05:56:31.327] ubi1:textures is mounted. [2025-09-24 05:56:31.327] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:56:31.327] ubi2:animations is mounted. [2025-09-24 05:56:31.327] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:56:31.327] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:56:31.327] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:56:31.327] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:56:31.327] data.LB_FadeInType0=100 [2025-09-24 05:56:31.327] data.CHLH_FadeInType0=0 [2025-09-24 05:56:31.327] data.WU_FadeInDelay=0 [2025-09-24 05:56:31.327] max_time_out=0 [2025-09-24 05:56:31.327] No splash screen [2025-09-24 05:56:31.327] stop dss Done [2025-09-24 05:56:31.375] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:56:31.375] /dev/mem opened. [2025-09-24 05:56:31.407] Memory mapped at address 0xffff9f5ae000. [2025-09-24 05:56:31.407] Read at address 0x00600018 (0xffff9f5ae018): 0x00000000 [2025-09-24 05:56:31.407] Write at address 0x00600018 (0xffff9f5ae018): 0x00400040, readback 0x00400040 [2025-09-24 05:56:31.407] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:56:31.471] Loaded PowerVR consumer services. [2025-09-24 05:56:31.646] Waiting data available... [2025-09-24 05:56:31.663] 512+0 records in [2025-09-24 05:56:31.663] 512+0 records out [2025-09-24 05:56:31.695] Starting syslogd/klogd: done [2025-09-24 05:56:31.711] DML Start [2025-09-24 05:56:31.887] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:56:32.143] DML res1: 0 [2025-09-24 05:56:32.585] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:56:32.585] Read Success [2025-09-24 05:56:32.585] Verifying certificate... [2025-09-24 05:56:32.825] Verified OK [2025-09-24 05:56:32.841] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:56:34.533] Verified OK [2025-09-24 05:56:34.533] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:56:35.133] Verified OK [2025-09-24 05:56:35.133] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:56:37.707] fs.protected_hardlinks = 1 [2025-09-24 05:56:37.723] fs.protected_symlinks = 1 [2025-09-24 05:56:37.723] kernel.modules_disabled = 1 [2025-09-24 05:56:37.915] [2025-09-24 05:56:37.915] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:56:39.211] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:56:46.980] SBL1:1210.0.1.0 [2025-09-24 05:56:47.027] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:56:48.595] SBL2:1210.0.1.0 [2025-09-24 05:56:48.643] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:56:48.739] j-A [2025-09-24 05:56:56.094] The R5 Autosar Classic is running [2025-09-24 05:56:56.117] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:56:56.117] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:56:56.724] INIT: version 2.96 booting [2025-09-24 05:56:56.837] INIT: Entering runlevel: 5 [2025-09-24 05:56:56.996] mtd24 attached [2025-09-24 05:56:56.996] mtd32 attached [2025-09-24 05:56:57.012] mtd28 attached [2025-09-24 05:56:57.060] ubi0:textures is mounted. [2025-09-24 05:56:57.122] RTNETLINK answers: File exists [2025-09-24 05:56:57.122] ubi2:animations is mounted. [2025-09-24 05:56:57.122] ubi1:dml_code is mounted. [2025-09-24 05:56:57.122] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:56:57.122] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:56:57.122] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:56:57.122] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:56:57.122] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:56:57.122] data.LB_FadeInType0=100 [2025-09-24 05:56:57.122] data.CHLH_FadeInType0=0 [2025-09-24 05:56:57.122] data.WU_FadeInDelay=0 [2025-09-24 05:56:57.122] max_time_out=0 [2025-09-24 05:56:57.122] No splash screen [2025-09-24 05:56:57.122] stop dss Done [2025-09-24 05:56:57.170] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:56:57.170] /dev/mem opened. [2025-09-24 05:56:57.202] Memory mapped at address 0xffff86415000. [2025-09-24 05:56:57.202] Read at address 0x00600018 (0xffff86415018): 0x00000000 [2025-09-24 05:56:57.202] Write at address 0x00600018 (0xffff86415018): 0x00400040, readback 0x00400040 [2025-09-24 05:56:57.202] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:56:57.346] Loaded PowerVR consumer services. [2025-09-24 05:56:57.458] Waiting data available... [2025-09-24 05:56:57.474] 512+0 records in [2025-09-24 05:56:57.474] 512+0 records out [2025-09-24 05:56:57.490] Starting syslogd/klogd: done [2025-09-24 05:56:57.522] DML Start [2025-09-24 05:56:57.682] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:56:57.874] DML res1: 0 [2025-09-24 05:56:58.354] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:56:58.370] Read Success [2025-09-24 05:56:58.370] Verifying certificate... [2025-09-24 05:56:58.610] Verified OK [2025-09-24 05:56:58.626] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:57:00.160] Verified OK [2025-09-24 05:57:00.160] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:57:00.788] Verified OK [2025-09-24 05:57:00.788] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:57:03.475] fs.protected_hardlinks = 1 [2025-09-24 05:57:03.492] fs.protected_symlinks = 1 [2025-09-24 05:57:03.492] kernel.modules_disabled = 1 [2025-09-24 05:57:03.683] [2025-09-24 05:57:03.683] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:57:04.994] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:57:12.783] SBL1:1210.0.1.0 [2025-09-24 05:57:12.831] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:57:14.397] SBL2:1210.0.1.0 [2025-09-24 05:57:14.445] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:57:14.542] j-A [2025-09-24 05:57:21.896] The R5 Autosar Classic is running [2025-09-24 05:57:21.919] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:57:21.919] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:57:22.527] INIT: version 2.96 booting [2025-09-24 05:57:22.639] INIT: Entering runlevel: 5 [2025-09-24 05:57:22.798] mtd24 attached [2025-09-24 05:57:22.814] mtd32 attached [2025-09-24 05:57:22.814] mtd28 attached [2025-09-24 05:57:22.846] ubi0:textures is mounted. [2025-09-24 05:57:22.862] ubi1:dml_code is mounted. [2025-09-24 05:57:22.932] RTNETLINK answers: File exists [2025-09-24 05:57:22.932] ubi2:animations is mounted. [2025-09-24 05:57:22.932] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:57:22.932] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:57:22.932] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:57:22.932] data.LB_FadeInType0=100 [2025-09-24 05:57:22.932] data.CHLH_FadeInType0=0 [2025-09-24 05:57:22.932] data.WU_FadeInDelay=0 [2025-09-24 05:57:22.932] max_time_out=0 [2025-09-24 05:57:22.932] No splash screen [2025-09-24 05:57:22.932] stop dss Done [2025-09-24 05:57:22.932] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:57:22.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:57:22.980] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:57:22.980] /dev/mem opened. [2025-09-24 05:57:22.980] Memory mapped at address 0xffff8967f000. [2025-09-24 05:57:23.012] Read at address 0x00600018 (0xffff8967f018): 0x00000000 [2025-09-24 05:57:23.012] Write at address 0x00600018 (0xffff8967f018): 0x00400040, readback 0x00400040 [2025-09-24 05:57:23.012] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:57:23.092] Loaded PowerVR consumer services. [2025-09-24 05:57:23.263] 512+0 records in [2025-09-24 05:57:23.263] 512+0 records out [2025-09-24 05:57:23.263] Waiting data available... [2025-09-24 05:57:23.295] Starting syslogd/klogd: done [2025-09-24 05:57:23.327] DML Start [2025-09-24 05:57:23.487] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:57:23.711] DML res1: 0 [2025-09-24 05:57:24.172] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:57:24.172] Read Success [2025-09-24 05:57:24.172] Verifying certificate... [2025-09-24 05:57:24.428] Verified OK [2025-09-24 05:57:24.428] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:57:26.265] Verified OK [2025-09-24 05:57:26.265] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:57:26.789] Verified OK [2025-09-24 05:57:26.789] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:57:29.220] fs.protected_hardlinks = 1 [2025-09-24 05:57:29.236] fs.protected_symlinks = 1 [2025-09-24 05:57:29.236] kernel.modules_disabled = 1 [2025-09-24 05:57:29.444] [2025-09-24 05:57:29.444] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:57:30.835] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:57:38.584] SBL1:1210.0.1.0 [2025-09-24 05:57:38.632] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:57:40.199] SBL2:1210.0.1.0 [2025-09-24 05:57:40.248] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:57:40.344] j-A [2025-09-24 05:57:47.698] The R5 Autosar Classic is running [2025-09-24 05:57:47.719] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:57:47.719] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:57:48.328] INIT: version 2.96 booting [2025-09-24 05:57:48.439] INIT: Entering runlevel: 5 [2025-09-24 05:57:48.599] mtd32 attached [2025-09-24 05:57:48.615] mtd24 attached [2025-09-24 05:57:48.631] mtd28 attached [2025-09-24 05:57:48.663] RTNETLINK answers: File exists [2025-09-24 05:57:48.717] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:57:48.717] ubi0:dml_code is mounted. [2025-09-24 05:57:48.717] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:57:48.717] ubi1:textures is mounted. [2025-09-24 05:57:48.717] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:57:48.717] ubi2:animations is mounted. [2025-09-24 05:57:48.717] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:57:48.717] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:57:48.717] data.LB_FadeInType0=100 [2025-09-24 05:57:48.738] data.CHLH_FadeInType0=0 [2025-09-24 05:57:48.738] data.WU_FadeInDelay=0 [2025-09-24 05:57:48.738] max_time_out=0 [2025-09-24 05:57:48.738] No splash screen [2025-09-24 05:57:48.738] stop dss Done [2025-09-24 05:57:48.753] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:57:48.770] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:57:48.785] /dev/mem opened. [2025-09-24 05:57:48.817] Memory mapped at address 0xffff8d2f9000. [2025-09-24 05:57:48.817] Read at address 0x00600018 (0xffff8d2f9018): 0x00000000 [2025-09-24 05:57:48.817] Write at address 0x00600018 (0xffff8d2f9018): 0x00400040, readback 0x00400040 [2025-09-24 05:57:48.929] Loaded PowerVR consumer services. [2025-09-24 05:57:49.057] Waiting data available... [2025-09-24 05:57:49.073] 512+0 records in [2025-09-24 05:57:49.073] 512+0 records out [2025-09-24 05:57:49.105] Starting syslogd/klogd: done [2025-09-24 05:57:49.137] DML Start [2025-09-24 05:57:49.312] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:57:49.537] DML res1: 0 [2025-09-24 05:57:49.946] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:57:49.946] Read Success [2025-09-24 05:57:49.946] Verifying certificate... [2025-09-24 05:57:50.171] Verified OK [2025-09-24 05:57:50.171] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:57:51.914] Verified OK [2025-09-24 05:57:51.914] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:57:52.559] Verified OK [2025-09-24 05:57:52.559] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:57:55.230] fs.protected_hardlinks = 1 [2025-09-24 05:57:55.230] fs.protected_symlinks = 1 [2025-09-24 05:57:55.245] kernel.modules_disabled = 1 [2025-09-24 05:57:55.421] [2025-09-24 05:57:55.421] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:57:56.631] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:58:04.389] SBL1:1210.0.1.0 [2025-09-24 05:58:04.421] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:58:06.004] SBL2:1210.0.1.0 [2025-09-24 05:58:06.036] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:58:06.148] j-A [2025-09-24 05:58:13.502] The R5 Autosar Classic is running [2025-09-24 05:58:13.502] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:58:13.523] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:58:14.130] INIT: version 2.96 booting [2025-09-24 05:58:14.242] INIT: Entering runlevel: 5 [2025-09-24 05:58:14.386] mtd24 attached [2025-09-24 05:58:14.402] mtd28 attached [2025-09-24 05:58:14.418] mtd32 attached [2025-09-24 05:58:14.450] ubi0:textures is mounted. [2025-09-24 05:58:14.450] ubi1:animations is mounted. [2025-09-24 05:58:14.466] RTNETLINK answers: File exists [2025-09-24 05:58:14.521] ubi2:dml_code is mounted. [2025-09-24 05:58:14.521] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:58:14.521] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:58:14.521] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:58:14.521] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:58:14.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:58:14.521] data.LB_FadeInType0=100 [2025-09-24 05:58:14.521] data.CHLH_FadeInType0=0 [2025-09-24 05:58:14.521] data.WU_FadeInDelay=0 [2025-09-24 05:58:14.521] max_time_out=0 [2025-09-24 05:58:14.521] No splash screen [2025-09-24 05:58:14.521] stop dss Done [2025-09-24 05:58:14.553] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:58:14.569] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:58:14.603] /dev/mem opened. [2025-09-24 05:58:14.603] Memory mapped at address 0xffffa398e000. [2025-09-24 05:58:14.603] Read at address 0x00600018 (0xffffa398e018): 0x00000000 [2025-09-24 05:58:14.603] Write at address 0x00600018 (0xffffa398e018): 0x00400040, readback 0x00400040 [2025-09-24 05:58:14.779] Loaded PowerVR consumer services. [2025-09-24 05:58:14.886] Waiting data available... [2025-09-24 05:58:14.886] 512+0 records in [2025-09-24 05:58:14.886] 512+0 records out [2025-09-24 05:58:14.918] Starting syslogd/klogd: done [2025-09-24 05:58:14.934] DML Start [2025-09-24 05:58:15.111] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:58:15.335] DML res1: 0 [2025-09-24 05:58:15.750] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:58:15.766] Read Success [2025-09-24 05:58:15.766] Verifying certificate... [2025-09-24 05:58:16.022] Verified OK [2025-09-24 05:58:16.038] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:58:17.669] Verified OK [2025-09-24 05:58:17.684] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:58:18.387] Verified OK [2025-09-24 05:58:18.387] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:58:20.993] fs.protected_hardlinks = 1 [2025-09-24 05:58:20.993] fs.protected_symlinks = 1 [2025-09-24 05:58:21.010] kernel.modules_disabled = 1 [2025-09-24 05:58:21.201] [2025-09-24 05:58:21.201] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:58:22.454] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:58:30.211] SBL1:1210.0.1.0 [2025-09-24 05:58:30.242] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:58:31.825] SBL2:1210.0.1.0 [2025-09-24 05:58:31.857] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:58:31.969] j-A [2025-09-24 05:58:39.345] The R5 Autosar Classic is running [2025-09-24 05:58:39.345] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:58:39.345] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:58:39.953] INIT: version 2.96 booting [2025-09-24 05:58:40.064] INIT: Entering runlevel: 5 [2025-09-24 05:58:40.208] mtd28 attached [2025-09-24 05:58:40.224] mtd32 attached [2025-09-24 05:58:40.240] mtd24 attached [2025-09-24 05:58:40.256] ubi0:animations is mounted. [2025-09-24 05:58:40.288] ubi1:dml_code is mounted. [2025-09-24 05:58:40.288] RTNETLINK answers: File exists [2025-09-24 05:58:40.349] ubi2:textures is mounted. [2025-09-24 05:58:40.349] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:58:40.349] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:58:40.349] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:58:40.349] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:58:40.349] data.LB_FadeInType0=100 [2025-09-24 05:58:40.349] data.CHLH_FadeInType0=0 [2025-09-24 05:58:40.349] data.WU_FadeInDelay=0 [2025-09-24 05:58:40.349] max_time_out=0 [2025-09-24 05:58:40.349] No splash screen [2025-09-24 05:58:40.349] stop dss Done [2025-09-24 05:58:40.349] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:58:40.415] /dev/mem opened. [2025-09-24 05:58:40.415] Memory mapped at address 0xffff980e7000. [2025-09-24 05:58:40.415] Read at address 0x00600018 (0xffff980e7018): 0x00000000 [2025-09-24 05:58:40.415] Write at address 0x00600018 (0xffff980e7018): 0x00400040, readback 0x00400040 [2025-09-24 05:58:40.459] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:58:40.459] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:58:40.651] Loaded PowerVR consumer services. [2025-09-24 05:58:40.722] Waiting data available... [2025-09-24 05:58:40.722] 512+0 records in [2025-09-24 05:58:40.722] 512+0 records out [2025-09-24 05:58:40.754] Starting syslogd/klogd: done [2025-09-24 05:58:40.770] DML Start [2025-09-24 05:58:40.946] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:58:41.187] DML res1: 0 [2025-09-24 05:58:41.554] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:58:41.570] Read Success [2025-09-24 05:58:41.570] Verifying certificate... [2025-09-24 05:58:41.794] Verified OK [2025-09-24 05:58:41.826] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:58:43.512] Verified OK [2025-09-24 05:58:43.512] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:58:44.120] Verified OK [2025-09-24 05:58:44.136] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:58:46.773] fs.protected_hardlinks = 1 [2025-09-24 05:58:46.789] fs.protected_symlinks = 1 [2025-09-24 05:58:46.805] kernel.modules_disabled = 1 [2025-09-24 05:58:46.997] [2025-09-24 05:58:46.997] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:58:48.221] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:58:56.004] SBL1:1210.0.1.0 [2025-09-24 05:58:56.035] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:58:57.619] SBL2:1210.0.1.0 [2025-09-24 05:58:57.651] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:58:57.762] j-A [2025-09-24 05:59:05.101] The R5 Autosar Classic is running [2025-09-24 05:59:05.132] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:59:05.132] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:59:05.740] INIT: version 2.96 booting [2025-09-24 05:59:05.851] INIT: Entering runlevel: 5 [2025-09-24 05:59:05.996] mtd24 attached [2025-09-24 05:59:06.012] mtd28 attached [2025-09-24 05:59:06.044] mtd32 attached [2025-09-24 05:59:06.044] ubi0:textures is mounted. [2025-09-24 05:59:06.060] ubi1:animations is mounted. [2025-09-24 05:59:06.076] RTNETLINK answers: File exists [2025-09-24 05:59:06.109] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:59:06.109] ubi2:dml_code is mounted. [2025-09-24 05:59:06.109] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:59:06.109] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:59:06.109] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:59:06.134] data.LB_FadeInType0=100 [2025-09-24 05:59:06.134] data.CHLH_FadeInType0=0 [2025-09-24 05:59:06.134] data.WU_FadeInDelay=0 [2025-09-24 05:59:06.134] max_time_out=0 [2025-09-24 05:59:06.134] No splash screen [2025-09-24 05:59:06.134] stop dss Done [2025-09-24 05:59:06.134] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:59:06.166] /dev/mem opened. [2025-09-24 05:59:06.166] Memory mapped at address 0xffff83507000. [2025-09-24 05:59:06.209] Read at address 0x00600018 (0xffff83507018): 0x00000000 [2025-09-24 05:59:06.209] Write at address 0x00600018 (0xffff83507018): 0x00400040, readback 0x00400040 [2025-09-24 05:59:06.209] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:59:06.209] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:59:06.475] Loaded PowerVR consumer services. [2025-09-24 05:59:06.475] Waiting data available... [2025-09-24 05:59:06.491] 512+0 records in [2025-09-24 05:59:06.491] 512+0 records out [2025-09-24 05:59:06.539] Starting syslogd/klogd: done [2025-09-24 05:59:06.555] DML Start [2025-09-24 05:59:06.699] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:59:06.923] DML res1: 0 [2025-09-24 05:59:07.386] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:59:07.386] Read Success [2025-09-24 05:59:07.386] Verifying certificate... [2025-09-24 05:59:07.593] Verified OK [2025-09-24 05:59:07.625] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:59:09.230] Verified OK [2025-09-24 05:59:09.230] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:59:09.906] Verified OK [2025-09-24 05:59:09.906] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:59:12.529] fs.protected_hardlinks = 1 [2025-09-24 05:59:12.545] fs.protected_symlinks = 1 [2025-09-24 05:59:12.545] kernel.modules_disabled = 1 [2025-09-24 05:59:12.737] [2025-09-24 05:59:12.737] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:59:14.008] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:59:21.799] SBL1:1210.0.1.0 [2025-09-24 05:59:21.847] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:59:23.413] SBL2:1210.0.1.0 [2025-09-24 05:59:23.461] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 05:59:23.558] j-A [2025-09-24 05:59:30.915] The R5 Autosar Classic is running [2025-09-24 05:59:30.915] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:59:30.936] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:59:31.543] INIT: version 2.96 booting [2025-09-24 05:59:31.654] INIT: Entering runlevel: 5 [2025-09-24 05:59:31.815] mtd24 attached [2025-09-24 05:59:31.815] mtd32 attached [2025-09-24 05:59:31.831] mtd28 attached [2025-09-24 05:59:31.879] ubi1:dml_code is mounted. [2025-09-24 05:59:31.943] RTNETLINK answers: File exists [2025-09-24 05:59:31.943] ubi2:animations is mounted. [2025-09-24 05:59:31.943] ubi0:textures is mounted. [2025-09-24 05:59:31.943] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:59:31.943] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:59:31.943] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:59:31.943] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:59:31.943] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:59:31.943] data.LB_FadeInType0=100 [2025-09-24 05:59:31.943] data.CHLH_FadeInType0=0 [2025-09-24 05:59:31.943] data.WU_FadeInDelay=0 [2025-09-24 05:59:31.943] max_time_out=0 [2025-09-24 05:59:31.943] No splash screen [2025-09-24 05:59:31.943] stop dss Done [2025-09-24 05:59:32.019] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:59:32.019] /dev/mem opened. [2025-09-24 05:59:32.019] Memory mapped at address 0xffff83a4c000. [2025-09-24 05:59:32.019] Read at address 0x00600018 (0xffff83a4c018): 0x00000000 [2025-09-24 05:59:32.019] Write at address 0x00600018 (0xffff83a4c018): 0x00400040, readback 0x00400040 [2025-09-24 05:59:32.019] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:59:32.115] Loaded PowerVR consumer services. [2025-09-24 05:59:32.275] Waiting data available... [2025-09-24 05:59:32.291] 512+0 records in [2025-09-24 05:59:32.291] 512+0 records out [2025-09-24 05:59:32.307] Starting syslogd/klogd: done [2025-09-24 05:59:32.323] DML Start [2025-09-24 05:59:32.515] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:59:32.738] DML res1: 0 [2025-09-24 05:59:33.199] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:59:33.199] Read Success [2025-09-24 05:59:33.199] Verifying certificate... [2025-09-24 05:59:33.454] Verified OK [2025-09-24 05:59:33.470] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 05:59:35.079] Verified OK [2025-09-24 05:59:35.079] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 05:59:35.758] Verified OK [2025-09-24 05:59:35.758] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 05:59:38.413] fs.protected_hardlinks = 1 [2025-09-24 05:59:38.429] fs.protected_symlinks = 1 [2025-09-24 05:59:38.429] kernel.modules_disabled = 1 [2025-09-24 05:59:38.636] [2025-09-24 05:59:38.636] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 05:59:39.795] RTNETLINK answers: Cannot assign requested address [2025-09-24 05:59:47.621] SBL1:1210.0.1.0 [2025-09-24 05:59:47.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:59:49.236] SBL2:1210.0.1.0 [2025-09-24 05:59:49.268] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 05:59:49.380] j-A [2025-09-24 05:59:56.752] The R5 Autosar Classic is running [2025-09-24 05:59:56.752] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 05:59:56.752] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 05:59:57.360] INIT: version 2.96 booting [2025-09-24 05:59:57.471] INIT: Entering runlevel: 5 [2025-09-24 05:59:57.632] mtd32 attached [2025-09-24 05:59:57.632] mtd24 attached [2025-09-24 05:59:57.648] mtd28 attached [2025-09-24 05:59:57.664] ubi0:dml_code is mounted. [2025-09-24 05:59:57.696] RTNETLINK answers: File exists [2025-09-24 05:59:57.751] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 05:59:57.751] ubi1:textures is mounted. [2025-09-24 05:59:57.751] ubi2:animations is mounted. [2025-09-24 05:59:57.751] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 05:59:57.751] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 05:59:57.751] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 05:59:57.751] data.LB_FadeInType0=100 [2025-09-24 05:59:57.751] data.CHLH_FadeInType0=0 [2025-09-24 05:59:57.751] data.WU_FadeInDelay=0 [2025-09-24 05:59:57.751] max_time_out=0 [2025-09-24 05:59:57.751] No splash screen [2025-09-24 05:59:57.751] stop dss Done [2025-09-24 05:59:57.751] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 05:59:57.825] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 05:59:57.825] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 05:59:57.825] /dev/mem opened. [2025-09-24 05:59:57.825] Memory mapped at address 0xffff9c09a000. [2025-09-24 05:59:57.825] Read at address 0x00600018 (0xffff9c09a018): 0x00000000 [2025-09-24 05:59:57.825] Write at address 0x00600018 (0xffff9c09a018): 0x00400040, readback 0x00400040 [2025-09-24 05:59:57.922] Loaded PowerVR consumer services. [2025-09-24 05:59:58.093] Waiting data available... [2025-09-24 05:59:58.093] 512+0 records in [2025-09-24 05:59:58.093] 512+0 records out [2025-09-24 05:59:58.124] Starting syslogd/klogd: done [2025-09-24 05:59:58.140] DML Start [2025-09-24 05:59:58.332] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 05:59:58.524] DML res1: 0 [2025-09-24 05:59:58.982] Read DML Algo certificate (mtd31) and save to file [2025-09-24 05:59:58.982] Read Success [2025-09-24 05:59:58.982] Verifying certificate... [2025-09-24 05:59:59.190] Verified OK [2025-09-24 05:59:59.206] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:00:00.877] Verified OK [2025-09-24 06:00:00.877] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:00:01.531] Verified OK [2025-09-24 06:00:01.531] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:00:04.169] fs.protected_hardlinks = 1 [2025-09-24 06:00:04.169] fs.protected_symlinks = 1 [2025-09-24 06:00:04.184] kernel.modules_disabled = 1 [2025-09-24 06:00:04.377] [2025-09-24 06:00:04.377] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:00:05.640] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:00:13.417] SBL1:1210.0.1.0 [2025-09-24 06:00:13.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:00:15.032] SBL2:1210.0.1.0 [2025-09-24 06:00:15.080] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:00:15.176] j-A [2025-09-24 06:00:22.552] The R5 Autosar Classic is running [2025-09-24 06:00:22.552] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:00:22.552] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:00:23.159] INIT: version 2.96 booting [2025-09-24 06:00:23.272] INIT: Entering runlevel: 5 [2025-09-24 06:00:23.415] mtd28 attached [2025-09-24 06:00:23.431] mtd24 attached [2025-09-24 06:00:23.447] mtd32 attached [2025-09-24 06:00:23.547] RTNETLINK answers: File exists [2025-09-24 06:00:23.547] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:00:23.547] ubi1:textures is mounted. [2025-09-24 06:00:23.547] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:00:23.547] ubi0:animations is mounted. [2025-09-24 06:00:23.547] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:00:23.547] ubi2:dml_code is mounted. [2025-09-24 06:00:23.547] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:00:23.547] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:00:23.547] data.LB_FadeInType0=100 [2025-09-24 06:00:23.547] data.CHLH_FadeInType0=0 [2025-09-24 06:00:23.547] data.WU_FadeInDelay=0 [2025-09-24 06:00:23.547] max_time_out=0 [2025-09-24 06:00:23.547] No splash screen [2025-09-24 06:00:23.547] stop dss Done [2025-09-24 06:00:23.563] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:00:23.579] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:00:23.631] /dev/mem opened. [2025-09-24 06:00:23.631] Memory mapped at address 0xffffa7ec5000. [2025-09-24 06:00:23.631] Read at address 0x00600018 (0xffffa7ec5018): 0x00000000 [2025-09-24 06:00:23.631] Write at address 0x00600018 (0xffffa7ec5018): 0x00400040, readback 0x00400040 [2025-09-24 06:00:23.727] Loaded PowerVR consumer services. [2025-09-24 06:00:23.888] Waiting data available... [2025-09-24 06:00:23.888] 512+0 records in [2025-09-24 06:00:23.888] 512+0 records out [2025-09-24 06:00:23.935] Starting syslogd/klogd: done [2025-09-24 06:00:23.951] DML Start [2025-09-24 06:00:24.159] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:00:24.383] DML res1: 0 [2025-09-24 06:00:24.779] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:00:24.779] Read Success [2025-09-24 06:00:24.779] Verifying certificate... [2025-09-24 06:00:25.051] Verified OK [2025-09-24 06:00:25.066] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:00:26.801] Verified OK [2025-09-24 06:00:26.801] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:00:27.433] Verified OK [2025-09-24 06:00:27.433] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:00:29.958] fs.protected_hardlinks = 1 [2025-09-24 06:00:29.958] fs.protected_symlinks = 1 [2025-09-24 06:00:29.974] kernel.modules_disabled = 1 [2025-09-24 06:00:30.167] [2025-09-24 06:00:30.167] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:00:31.422] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:00:39.219] SBL1:1210.0.1.0 [2025-09-24 06:00:39.267] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:00:40.833] SBL2:1210.0.1.0 [2025-09-24 06:00:40.881] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:00:40.978] j-A [2025-09-24 06:00:48.334] The R5 Autosar Classic is running [2025-09-24 06:00:48.357] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:00:48.357] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:00:48.963] INIT: version 2.96 booting [2025-09-24 06:00:49.076] INIT: Entering runlevel: 5 [2025-09-24 06:00:49.236] mtd24 attached [2025-09-24 06:00:49.236] mtd28 attached [2025-09-24 06:00:49.252] mtd32 attached [2025-09-24 06:00:49.300] ubi0:textures is mounted. [2025-09-24 06:00:49.300] RTNETLINK answers: File exists [2025-09-24 06:00:49.316] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:00:49.316] ubi1:animations is mounted. [2025-09-24 06:00:49.371] ubi2:dml_code is mounted. [2025-09-24 06:00:49.371] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:00:49.371] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:00:49.371] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:00:49.371] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:00:49.371] data.LB_FadeInType0=100 [2025-09-24 06:00:49.371] data.CHLH_FadeInType0=0 [2025-09-24 06:00:49.371] data.WU_FadeInDelay=0 [2025-09-24 06:00:49.371] max_time_out=0 [2025-09-24 06:00:49.371] No splash screen [2025-09-24 06:00:49.371] stop dss Done [2025-09-24 06:00:49.387] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:00:49.403] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:00:49.419] /dev/mem opened. [2025-09-24 06:00:49.419] Memory mapped at address 0xffff8d7d8000. [2025-09-24 06:00:49.445] Read at address 0x00600018 (0xffff8d7d8018): 0x00000000 [2025-09-24 06:00:49.445] Write at address 0x00600018 (0xffff8d7d8018): 0x00400040, readback 0x00400040 [2025-09-24 06:00:49.541] Loaded PowerVR consumer services. [2025-09-24 06:00:49.701] Waiting data available... [2025-09-24 06:00:49.716] 512+0 records in [2025-09-24 06:00:49.716] 512+0 records out [2025-09-24 06:00:49.732] Starting syslogd/klogd: done [2025-09-24 06:00:49.764] DML Start [2025-09-24 06:00:49.957] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:00:50.181] DML res1: 0 [2025-09-24 06:00:50.594] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:00:50.594] Read Success [2025-09-24 06:00:50.594] Verifying certificate... [2025-09-24 06:00:50.801] Verified OK [2025-09-24 06:00:50.817] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:00:52.560] Verified OK [2025-09-24 06:00:52.560] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:00:53.181] Verified OK [2025-09-24 06:00:53.181] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:00:55.677] fs.protected_hardlinks = 1 [2025-09-24 06:00:55.677] fs.protected_symlinks = 1 [2025-09-24 06:00:55.693] kernel.modules_disabled = 1 [2025-09-24 06:00:55.884] [2025-09-24 06:00:55.884] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:00:57.253] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:01:05.023] SBL1:1210.0.1.0 [2025-09-24 06:01:05.071] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:01:06.637] SBL2:1210.0.1.0 [2025-09-24 06:01:06.685] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:01:06.781] j-A [2025-09-24 06:01:14.136] The R5 Autosar Classic is running [2025-09-24 06:01:14.157] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:01:14.157] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:01:14.765] INIT: version 2.96 booting [2025-09-24 06:01:14.876] INIT: Entering runlevel: 5 [2025-09-24 06:01:15.037] mtd24 attached [2025-09-24 06:01:15.037] mtd28 attached [2025-09-24 06:01:15.053] mtd32 attached [2025-09-24 06:01:15.101] ubi0:textures is mounted. [2025-09-24 06:01:15.101] RTNETLINK answers: File exists [2025-09-24 06:01:15.169] ubi1:animations is mounted. [2025-09-24 06:01:15.170] ubi2:dml_code is mounted. [2025-09-24 06:01:15.170] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:01:15.170] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:01:15.170] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:01:15.170] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:01:15.170] data.LB_FadeInType0=100 [2025-09-24 06:01:15.170] data.CHLH_FadeInType0=0 [2025-09-24 06:01:15.170] data.WU_FadeInDelay=0 [2025-09-24 06:01:15.170] max_time_out=0 [2025-09-24 06:01:15.170] No splash screen [2025-09-24 06:01:15.170] stop dss Done [2025-09-24 06:01:15.170] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:01:15.201] /dev/mem opened. [2025-09-24 06:01:15.201] Memory mapped at address 0xffff8136a000. [2025-09-24 06:01:15.227] Read at address 0x00600018 (0xffff8136a018): 0x00000000 [2025-09-24 06:01:15.227] Write at address 0x00600018 (0xffff8136a018): 0x00400040, readback 0x00400040 [2025-09-24 06:01:15.253] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:01:15.253] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:01:15.429] Loaded PowerVR consumer services. [2025-09-24 06:01:15.509] Waiting data available... [2025-09-24 06:01:15.509] 512+0 records in [2025-09-24 06:01:15.509] 512+0 records out [2025-09-24 06:01:15.557] Starting syslogd/klogd: done [2025-09-24 06:01:15.590] DML Start [2025-09-24 06:01:15.733] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:01:15.957] DML res1: 0 [2025-09-24 06:01:16.435] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:01:16.435] Read Success [2025-09-24 06:01:16.435] Verifying certificate... [2025-09-24 06:01:16.659] Verified OK [2025-09-24 06:01:16.675] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:01:18.402] Verified OK [2025-09-24 06:01:18.402] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:01:19.019] Verified OK [2025-09-24 06:01:19.019] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:01:21.594] fs.protected_hardlinks = 1 [2025-09-24 06:01:21.610] fs.protected_symlinks = 1 [2025-09-24 06:01:21.610] kernel.modules_disabled = 1 [2025-09-24 06:01:21.817] [2025-09-24 06:01:21.817] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:01:23.041] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:01:30.822] SBL1:1210.0.1.0 [2025-09-24 06:01:30.854] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:01:32.437] SBL2:1210.0.1.0 [2025-09-24 06:01:32.468] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:01:32.581] j-A [2025-09-24 06:01:39.953] The R5 Autosar Classic is running [2025-09-24 06:01:39.953] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:01:39.953] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:01:40.561] INIT: version 2.96 booting [2025-09-24 06:01:40.673] INIT: Entering runlevel: 5 [2025-09-24 06:01:40.832] mtd24 attached [2025-09-24 06:01:40.832] mtd32 attached [2025-09-24 06:01:40.848] mtd28 attached [2025-09-24 06:01:40.897] ubi0:textures is mounted. [2025-09-24 06:01:40.965] RTNETLINK answers: File exists [2025-09-24 06:01:40.965] ubi2:animations is mounted. [2025-09-24 06:01:40.965] ubi1:dml_code is mounted. [2025-09-24 06:01:40.965] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:01:40.965] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:01:40.965] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:01:40.965] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:01:40.965] data.LB_FadeInType0=100 [2025-09-24 06:01:40.965] data.CHLH_FadeInType0=0 [2025-09-24 06:01:40.965] data.WU_FadeInDelay=0 [2025-09-24 06:01:40.965] max_time_out=0 [2025-09-24 06:01:40.965] No splash screen [2025-09-24 06:01:40.965] stop dss Done [2025-09-24 06:01:40.965] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:01:41.042] /dev/mem opened. [2025-09-24 06:01:41.042] Memory mapped at address 0xffff85b26000. [2025-09-24 06:01:41.042] Read at address 0x00600018 (0xffff85b26018): 0x00000000 [2025-09-24 06:01:41.042] Write at address 0x00600018 (0xffff85b26018): 0x00400040, readback 0x00400040 [2025-09-24 06:01:41.042] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:01:41.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:01:41.234] Loaded PowerVR consumer services. [2025-09-24 06:01:41.314] Waiting data available... [2025-09-24 06:01:41.330] 512+0 records in [2025-09-24 06:01:41.330] 512+0 records out [2025-09-24 06:01:41.378] Starting syslogd/klogd: done [2025-09-24 06:01:41.394] DML Start [2025-09-24 06:01:41.586] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:01:41.826] DML res1: 0 [2025-09-24 06:01:42.219] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:01:42.219] Read Success [2025-09-24 06:01:42.219] Verifying certificate... [2025-09-24 06:01:42.444] Verified OK [2025-09-24 06:01:42.460] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:01:44.088] Verified OK [2025-09-24 06:01:44.088] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:01:44.756] Verified OK [2025-09-24 06:01:44.756] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:01:47.315] fs.protected_hardlinks = 1 [2025-09-24 06:01:47.331] fs.protected_symlinks = 1 [2025-09-24 06:01:47.331] kernel.modules_disabled = 1 [2025-09-24 06:01:47.522] [2025-09-24 06:01:47.522] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:01:48.924] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:01:56.622] SBL1:1210.0.1.0 [2025-09-24 06:01:56.654] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:01:58.237] SBL2:1210.0.1.0 [2025-09-24 06:01:58.269] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:01:58.381] j-A [2025-09-24 06:02:05.756] The R5 Autosar Classic is running [2025-09-24 06:02:05.756] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:02:05.756] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:02:06.364] INIT: version 2.96 booting [2025-09-24 06:02:06.476] INIT: Entering runlevel: 5 [2025-09-24 06:02:06.619] mtd24 attached [2025-09-24 06:02:06.635] mtd28 attached [2025-09-24 06:02:06.651] mtd32 attached [2025-09-24 06:02:06.699] ubi0:textures is mounted. [2025-09-24 06:02:06.699] ubi1:animations is mounted. [2025-09-24 06:02:06.699] RTNETLINK answers: File exists [2025-09-24 06:02:06.755] ubi2:dml_code is mounted. [2025-09-24 06:02:06.755] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:02:06.755] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:02:06.755] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:02:06.755] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:02:06.755] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:02:06.755] data.LB_FadeInType0=100 [2025-09-24 06:02:06.755] data.CHLH_FadeInType0=0 [2025-09-24 06:02:06.755] data.WU_FadeInDelay=0 [2025-09-24 06:02:06.755] max_time_out=0 [2025-09-24 06:02:06.755] No splash screen [2025-09-24 06:02:06.755] stop dss Done [2025-09-24 06:02:06.787] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:02:06.803] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:02:06.837] /dev/mem opened. [2025-09-24 06:02:06.837] Memory mapped at address 0xffff80b7f000. [2025-09-24 06:02:06.837] Read at address 0x00600018 (0xffff80b7f018): 0x00000000 [2025-09-24 06:02:06.837] Write at address 0x00600018 (0xffff80b7f018): 0x00400040, readback 0x00400040 [2025-09-24 06:02:06.996] Loaded PowerVR consumer services. [2025-09-24 06:02:07.091] Waiting data available... [2025-09-24 06:02:07.108] 512+0 records in [2025-09-24 06:02:07.108] 512+0 records out [2025-09-24 06:02:07.156] Starting syslogd/klogd: done [2025-09-24 06:02:07.172] DML Start [2025-09-24 06:02:07.364] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:02:07.572] DML res1: 0 [2025-09-24 06:02:07.987] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:02:08.008] Read Success [2025-09-24 06:02:08.008] Verifying certificate... [2025-09-24 06:02:08.280] Verified OK [2025-09-24 06:02:08.296] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:02:10.015] Verified OK [2025-09-24 06:02:10.015] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:02:10.663] Verified OK [2025-09-24 06:02:10.663] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:02:13.269] fs.protected_hardlinks = 1 [2025-09-24 06:02:13.285] fs.protected_symlinks = 1 [2025-09-24 06:02:13.285] kernel.modules_disabled = 1 [2025-09-24 06:02:13.493] [2025-09-24 06:02:13.493] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:02:14.625] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:02:22.426] SBL1:1210.0.1.0 [2025-09-24 06:02:22.473] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:02:24.040] SBL2:1210.0.1.0 [2025-09-24 06:02:24.088] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:02:24.183] j-A [2025-09-24 06:02:31.538] The R5 Autosar Classic is running [2025-09-24 06:02:31.559] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:02:31.559] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:02:32.166] INIT: version 2.96 booting [2025-09-24 06:02:32.279] INIT: Entering runlevel: 5 [2025-09-24 06:02:32.438] mtd24 attached [2025-09-24 06:02:32.438] mtd28 attached [2025-09-24 06:02:32.454] mtd32 attached [2025-09-24 06:02:32.503] ubi1:animations is mounted. [2025-09-24 06:02:32.562] RTNETLINK answers: File exists [2025-09-24 06:02:32.562] ubi0:textures is mounted. [2025-09-24 06:02:32.562] ubi2:dml_code is mounted. [2025-09-24 06:02:32.562] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:02:32.562] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:02:32.562] data.LB_FadeInType0=100 [2025-09-24 06:02:32.562] data.CHLH_FadeInType0=0 [2025-09-24 06:02:32.562] data.WU_FadeInDelay=0 [2025-09-24 06:02:32.562] max_time_out=0 [2025-09-24 06:02:32.562] No splash screen [2025-09-24 06:02:32.562] stop dss Done [2025-09-24 06:02:32.562] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:02:32.562] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:02:32.577] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:02:32.631] /dev/mem opened. [2025-09-24 06:02:32.631] Memory mapped at address 0xffff9354e000. [2025-09-24 06:02:32.631] Read at address 0x00600018 (0xffff9354e018): 0x00000000 [2025-09-24 06:02:32.631] Write at address 0x00600018 (0xffff9354e018): 0x00400040, readback 0x00400040 [2025-09-24 06:02:32.631] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:02:32.647] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:02:32.887] Loaded PowerVR consumer services. [2025-09-24 06:02:32.950] 512+0 records in [2025-09-24 06:02:32.950] 512+0 records out [2025-09-24 06:02:32.950] Waiting data available... [2025-09-24 06:02:32.982] Starting syslogd/klogd: done [2025-09-24 06:02:32.998] DML Start [2025-09-24 06:02:33.142] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:02:33.366] DML res1: 0 [2025-09-24 06:02:33.873] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:02:33.873] Read Success [2025-09-24 06:02:33.873] Verifying certificate... [2025-09-24 06:02:34.097] Verified OK [2025-09-24 06:02:34.113] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:02:35.785] Verified OK [2025-09-24 06:02:35.785] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:02:36.369] Verified OK [2025-09-24 06:02:36.369] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:02:38.880] fs.protected_hardlinks = 1 [2025-09-24 06:02:38.896] fs.protected_symlinks = 1 [2025-09-24 06:02:38.896] kernel.modules_disabled = 1 [2025-09-24 06:02:39.088] [2025-09-24 06:02:39.088] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:02:40.492] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:02:48.218] SBL1:1210.0.1.0 [2025-09-24 06:02:48.266] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:02:49.832] SBL2:1210.0.1.0 [2025-09-24 06:02:49.880] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:02:49.992] j-A [2025-09-24 06:02:57.330] The R5 Autosar Classic is running [2025-09-24 06:02:57.355] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:02:57.355] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:02:57.963] INIT: version 2.96 booting [2025-09-24 06:02:58.075] INIT: Entering runlevel: 5 [2025-09-24 06:02:58.235] mtd24 attached [2025-09-24 06:02:58.235] mtd28 attached [2025-09-24 06:02:58.251] mtd32 attached [2025-09-24 06:02:58.283] ubi0:textures is mounted. [2025-09-24 06:02:58.299] RTNETLINK answers: File exists [2025-09-24 06:02:58.364] ubi1:animations is mounted. [2025-09-24 06:02:58.364] ubi2:dml_code is mounted. [2025-09-24 06:02:58.364] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:02:58.364] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:02:58.364] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:02:58.364] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:02:58.364] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:02:58.364] data.LB_FadeInType0=100 [2025-09-24 06:02:58.364] data.CHLH_FadeInType0=0 [2025-09-24 06:02:58.364] data.WU_FadeInDelay=0 [2025-09-24 06:02:58.364] max_time_out=0 [2025-09-24 06:02:58.364] No splash screen [2025-09-24 06:02:58.364] stop dss Done [2025-09-24 06:02:58.395] /dev/mem opened. [2025-09-24 06:02:58.395] Memory mapped at address 0xffffb03b9000. [2025-09-24 06:02:58.428] Read at address 0x00600018 (0xffffb03b9018): 0x00000000 [2025-09-24 06:02:58.428] Write at address 0x00600018 (0xffffb03b9018): 0x00400040, readback 0x00400040 [2025-09-24 06:02:58.428] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:02:58.428] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:02:58.523] Loaded PowerVR consumer services. [2025-09-24 06:02:58.700] Waiting data available... [2025-09-24 06:02:58.716] 512+0 records in [2025-09-24 06:02:58.716] 512+0 records out [2025-09-24 06:02:58.748] Starting syslogd/klogd: done [2025-09-24 06:02:58.764] DML Start [2025-09-24 06:02:58.956] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:02:59.131] DML res1: 0 [2025-09-24 06:02:59.638] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:02:59.638] Read Success [2025-09-24 06:02:59.638] Verifying certificate... [2025-09-24 06:02:59.878] Verified OK [2025-09-24 06:02:59.894] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:03:01.685] Verified OK [2025-09-24 06:03:01.685] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:03:02.252] Verified OK [2025-09-24 06:03:02.252] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:03:04.650] fs.protected_hardlinks = 1 [2025-09-24 06:03:04.650] fs.protected_symlinks = 1 [2025-09-24 06:03:04.666] kernel.modules_disabled = 1 [2025-09-24 06:03:04.874] [2025-09-24 06:03:04.874] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:03:06.195] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:03:14.056] SBL1:1210.0.1.0 [2025-09-24 06:03:14.088] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:03:15.670] SBL2:1210.0.1.0 [2025-09-24 06:03:15.702] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:03:15.815] j-A [2025-09-24 06:03:23.189] The R5 Autosar Classic is running [2025-09-24 06:03:23.189] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:03:23.189] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:03:23.797] INIT: version 2.96 booting [2025-09-24 06:03:23.908] INIT: Entering runlevel: 5 [2025-09-24 06:03:24.068] mtd24 attached [2025-09-24 06:03:24.084] mtd28 attached [2025-09-24 06:03:24.100] mtd32 attached [2025-09-24 06:03:24.132] ubi0:textures is mounted. [2025-09-24 06:03:24.180] RTNETLINK answers: File exists [2025-09-24 06:03:24.180] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:03:24.180] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:03:24.180] ubi1:animations is mounted. [2025-09-24 06:03:24.180] ubi2:dml_code is mounted. [2025-09-24 06:03:24.180] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:03:24.180] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:03:24.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:03:24.201] data.LB_FadeInType0=100 [2025-09-24 06:03:24.201] data.CHLH_FadeInType0=0 [2025-09-24 06:03:24.201] data.WU_FadeInDelay=0 [2025-09-24 06:03:24.201] max_time_out=0 [2025-09-24 06:03:24.201] No splash screen [2025-09-24 06:03:24.201] stop dss Done [2025-09-24 06:03:24.249] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:03:24.283] /dev/mem opened. [2025-09-24 06:03:24.283] Memory mapped at address 0xffff83650000. [2025-09-24 06:03:24.283] Read at address 0x00600018 (0xffff83650018): 0x00000000 [2025-09-24 06:03:24.283] Write at address 0x00600018 (0xffff83650018): 0x00400040, readback 0x00400040 [2025-09-24 06:03:24.283] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:03:24.427] Loaded PowerVR consumer services. [2025-09-24 06:03:24.567] Waiting data available... [2025-09-24 06:03:24.567] 512+0 records in [2025-09-24 06:03:24.567] 512+0 records out [2025-09-24 06:03:24.583] Starting syslogd/klogd: done [2025-09-24 06:03:24.599] DML Start [2025-09-24 06:03:24.775] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:03:24.999] DML res1: 0 [2025-09-24 06:03:25.414] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:03:25.414] Read Success [2025-09-24 06:03:25.430] Verifying certificate... [2025-09-24 06:03:25.718] Verified OK [2025-09-24 06:03:25.734] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:03:27.391] Verified OK [2025-09-24 06:03:27.391] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:03:28.071] Verified OK [2025-09-24 06:03:28.071] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:03:30.740] fs.protected_hardlinks = 1 [2025-09-24 06:03:30.740] fs.protected_symlinks = 1 [2025-09-24 06:03:30.756] kernel.modules_disabled = 1 [2025-09-24 06:03:30.948] [2025-09-24 06:03:30.948] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:03:32.053] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:03:39.868] SBL1:1210.0.1.0 [2025-09-24 06:03:39.916] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:03:41.484] SBL2:1210.0.1.0 [2025-09-24 06:03:41.532] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:03:41.627] j-A [2025-09-24 06:03:48.983] The R5 Autosar Classic is running [2025-09-24 06:03:48.983] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:03:49.005] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:03:49.612] INIT: version 2.96 booting [2025-09-24 06:03:49.724] INIT: Entering runlevel: 5 [2025-09-24 06:03:49.868] mtd24 attached [2025-09-24 06:03:49.884] mtd32 attached [2025-09-24 06:03:49.900] mtd28 attached [2025-09-24 06:03:49.994] RTNETLINK answers: File exists [2025-09-24 06:03:49.994] ubi0:textures is mounted. [2025-09-24 06:03:49.994] ubi1:dml_code is mounted. [2025-09-24 06:03:49.994] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:03:49.994] ubi2:animations is mounted. [2025-09-24 06:03:49.994] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:03:49.994] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:03:49.994] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:03:49.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:03:49.994] data.LB_FadeInType0=100 [2025-09-24 06:03:49.994] data.CHLH_FadeInType0=0 [2025-09-24 06:03:49.994] data.WU_FadeInDelay=0 [2025-09-24 06:03:49.994] max_time_out=0 [2025-09-24 06:03:49.994] No splash screen [2025-09-24 06:03:49.994] stop dss Done [2025-09-24 06:03:50.065] /dev/mem opened. [2025-09-24 06:03:50.065] Memory mapped at address 0xffff9d8d2000. [2025-09-24 06:03:50.065] Read at address 0x00600018 (0xffff9d8d2018): 0x00000000 [2025-09-24 06:03:50.065] Write at address 0x00600018 (0xffff9d8d2018): 0x00400040, readback 0x00400040 [2025-09-24 06:03:50.065] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:03:50.081] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:03:50.177] Loaded PowerVR consumer services. [2025-09-24 06:03:50.348] Waiting data available... [2025-09-24 06:03:50.348] 512+0 records in [2025-09-24 06:03:50.348] 512+0 records out [2025-09-24 06:03:50.381] Starting syslogd/klogd: done [2025-09-24 06:03:50.413] DML Start [2025-09-24 06:03:50.588] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:03:50.812] DML res1: 0 [2025-09-24 06:03:51.266] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:03:51.266] Read Success [2025-09-24 06:03:51.266] Verifying certificate... [2025-09-24 06:03:51.505] Verified OK [2025-09-24 06:03:51.521] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:03:53.231] Verified OK [2025-09-24 06:03:53.231] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:03:53.791] Verified OK [2025-09-24 06:03:53.791] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:03:56.397] fs.protected_hardlinks = 1 [2025-09-24 06:03:56.397] fs.protected_symlinks = 1 [2025-09-24 06:03:56.413] kernel.modules_disabled = 1 [2025-09-24 06:03:56.604] [2025-09-24 06:03:56.604] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:03:57.822] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:04:05.696] SBL1:1210.0.1.0 [2025-09-24 06:04:05.728] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:04:07.295] SBL2:1210.0.1.0 [2025-09-24 06:04:07.343] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:04:07.454] j-A [2025-09-24 06:04:14.795] The R5 Autosar Classic is running [2025-09-24 06:04:14.827] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:04:14.827] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:04:15.433] INIT: version 2.96 booting [2025-09-24 06:04:15.546] INIT: Entering runlevel: 5 [2025-09-24 06:04:15.706] mtd32 attached [2025-09-24 06:04:15.706] mtd24 attached [2025-09-24 06:04:15.722] mtd28 attached [2025-09-24 06:04:15.770] ubi0:dml_code is mounted. [2025-09-24 06:04:15.770] RTNETLINK answers: File exists [2025-09-24 06:04:15.830] ubi2:animations is mounted. [2025-09-24 06:04:15.830] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:04:15.830] ubi1:textures is mounted. [2025-09-24 06:04:15.830] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:04:15.830] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:04:15.830] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:04:15.830] data.LB_FadeInType0=100 [2025-09-24 06:04:15.830] data.CHLH_FadeInType0=0 [2025-09-24 06:04:15.830] data.WU_FadeInDelay=0 [2025-09-24 06:04:15.830] max_time_out=0 [2025-09-24 06:04:15.830] No splash screen [2025-09-24 06:04:15.830] stop dss Done [2025-09-24 06:04:15.830] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:04:15.905] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:04:15.905] /dev/mem opened. [2025-09-24 06:04:15.905] Memory mapped at address 0xffff91b95000. [2025-09-24 06:04:15.905] Read at address 0x00600018 (0xffff91b95018): 0x00000000 [2025-09-24 06:04:15.905] Write at address 0x00600018 (0xffff91b95018): 0x00400040, readback 0x00400040 [2025-09-24 06:04:15.905] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:04:16.016] Loaded PowerVR consumer services. [2025-09-24 06:04:16.160] Waiting data available... [2025-09-24 06:04:16.192] 512+0 records in [2025-09-24 06:04:16.192] 512+0 records out [2025-09-24 06:04:16.209] Starting syslogd/klogd: done [2025-09-24 06:04:16.225] DML Start [2025-09-24 06:04:16.384] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:04:16.640] DML res1: 0 [2025-09-24 06:04:17.055] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:04:17.077] Read Success [2025-09-24 06:04:17.077] Verifying certificate... [2025-09-24 06:04:17.316] Verified OK [2025-09-24 06:04:17.332] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:04:18.959] Verified OK [2025-09-24 06:04:18.959] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:04:19.551] Verified OK [2025-09-24 06:04:19.551] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:04:22.204] fs.protected_hardlinks = 1 [2025-09-24 06:04:22.220] fs.protected_symlinks = 1 [2025-09-24 06:04:22.236] kernel.modules_disabled = 1 [2025-09-24 06:04:22.428] [2025-09-24 06:04:22.428] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:04:23.674] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:04:31.467] SBL1:1210.0.1.0 [2025-09-24 06:04:31.515] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:04:33.082] SBL2:1210.0.1.0 [2025-09-24 06:04:33.130] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:04:33.242] j-A [2025-09-24 06:04:40.582] The R5 Autosar Classic is running [2025-09-24 06:04:40.607] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:04:40.607] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:04:41.215] INIT: version 2.96 booting [2025-09-24 06:04:41.327] INIT: Entering runlevel: 5 [2025-09-24 06:04:41.487] mtd28 attached [2025-09-24 06:04:41.503] mtd32 attached [2025-09-24 06:04:41.503] mtd24 attached [2025-09-24 06:04:41.518] ubi0:animations is mounted. [2025-09-24 06:04:41.550] RTNETLINK answers: File exists [2025-09-24 06:04:41.550] ubi1:dml_code is mounted. [2025-09-24 06:04:41.615] ubi2:textures is mounted. [2025-09-24 06:04:41.615] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:04:41.615] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:04:41.615] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:04:41.615] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:04:41.615] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:04:41.615] data.LB_FadeInType0=100 [2025-09-24 06:04:41.615] data.CHLH_FadeInType0=0 [2025-09-24 06:04:41.615] data.WU_FadeInDelay=0 [2025-09-24 06:04:41.615] max_time_out=0 [2025-09-24 06:04:41.615] No splash screen [2025-09-24 06:04:41.615] stop dss Done [2025-09-24 06:04:41.702] /dev/mem opened. [2025-09-24 06:04:41.702] Memory mapped at address 0xffff88d0c000. [2025-09-24 06:04:41.702] Read at address 0x00600018 (0xffff88d0c018): 0x00000000 [2025-09-24 06:04:41.702] Write at address 0x00600018 (0xffff88d0c018): 0x00400040, readback 0x00400040 [2025-09-24 06:04:41.702] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:04:41.702] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:04:41.941] Loaded PowerVR consumer services. [2025-09-24 06:04:41.989] Waiting data available... [2025-09-24 06:04:42.005] 512+0 records in [2025-09-24 06:04:42.005] 512+0 records out [2025-09-24 06:04:42.021] Starting syslogd/klogd: done [2025-09-24 06:04:42.037] DML Start [2025-09-24 06:04:42.197] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:04:42.406] DML res1: 0 [2025-09-24 06:04:42.893] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:04:42.893] Read Success [2025-09-24 06:04:42.893] Verifying certificate... [2025-09-24 06:04:43.181] Verified OK [2025-09-24 06:04:43.213] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:04:44.905] Verified OK [2025-09-24 06:04:44.905] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:04:45.495] Verified OK [2025-09-24 06:04:45.495] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:04:48.037] fs.protected_hardlinks = 1 [2025-09-24 06:04:48.037] fs.protected_symlinks = 1 [2025-09-24 06:04:48.052] kernel.modules_disabled = 1 [2025-09-24 06:04:48.244] [2025-09-24 06:04:48.244] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:04:49.548] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:04:57.290] SBL1:1210.0.1.0 [2025-09-24 06:04:57.338] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:04:58.905] SBL2:1210.0.1.0 [2025-09-24 06:04:58.953] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:04:59.049] j-A [2025-09-24 06:05:06.405] The R5 Autosar Classic is running [2025-09-24 06:05:06.405] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:05:06.426] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:05:07.033] INIT: version 2.96 booting [2025-09-24 06:05:07.144] INIT: Entering runlevel: 5 [2025-09-24 06:05:07.305] mtd24 attached [2025-09-24 06:05:07.305] mtd28 attached [2025-09-24 06:05:07.337] mtd32 attached [2025-09-24 06:05:07.353] ubi0:textures is mounted. [2025-09-24 06:05:07.369] RTNETLINK answers: File exists [2025-09-24 06:05:07.434] ubi1:animations is mounted. [2025-09-24 06:05:07.434] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:05:07.434] ubi2:dml_code is mounted. [2025-09-24 06:05:07.434] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:05:07.434] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:05:07.434] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:05:07.434] data.LB_FadeInType0=100 [2025-09-24 06:05:07.434] data.CHLH_FadeInType0=0 [2025-09-24 06:05:07.434] data.WU_FadeInDelay=0 [2025-09-24 06:05:07.434] max_time_out=0 [2025-09-24 06:05:07.434] No splash screen [2025-09-24 06:05:07.434] stop dss Done [2025-09-24 06:05:07.434] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:05:07.504] /dev/mem opened. [2025-09-24 06:05:07.504] Memory mapped at address 0xffff9dfb7000. [2025-09-24 06:05:07.504] Read at address 0x00600018 (0xffff9dfb7018): 0x00000000 [2025-09-24 06:05:07.504] Write at address 0x00600018 (0xffff9dfb7018): 0x00400040, readback 0x00400040 [2025-09-24 06:05:07.536] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:05:07.552] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:05:07.760] Loaded PowerVR consumer services. [2025-09-24 06:05:07.776] Waiting data available... [2025-09-24 06:05:07.792] 512+0 records in [2025-09-24 06:05:07.792] 512+0 records out [2025-09-24 06:05:07.823] Starting syslogd/klogd: done [2025-09-24 06:05:07.839] DML Start [2025-09-24 06:05:07.999] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:05:08.240] DML res1: 0 [2025-09-24 06:05:08.727] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:05:08.727] Read Success [2025-09-24 06:05:08.727] Verifying certificate... [2025-09-24 06:05:09.031] Verified OK [2025-09-24 06:05:09.079] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:05:10.804] Verified OK [2025-09-24 06:05:10.804] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:05:11.353] Verified OK [2025-09-24 06:05:11.353] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:05:13.959] fs.protected_hardlinks = 1 [2025-09-24 06:05:13.959] fs.protected_symlinks = 1 [2025-09-24 06:05:13.975] kernel.modules_disabled = 1 [2025-09-24 06:05:14.167] [2025-09-24 06:05:14.167] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:05:15.265] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:05:23.110] SBL1:1210.0.1.0 [2025-09-24 06:05:23.158] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:05:24.725] SBL2:1210.0.1.0 [2025-09-24 06:05:24.773] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:05:24.885] j-A [2025-09-24 06:05:32.254] The R5 Autosar Classic is running [2025-09-24 06:05:32.254] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:05:32.254] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:05:32.862] INIT: version 2.96 booting [2025-09-24 06:05:32.974] INIT: Entering runlevel: 5 [2025-09-24 06:05:33.134] mtd24 attached [2025-09-24 06:05:33.134] mtd32 attached [2025-09-24 06:05:33.150] mtd28 attached [2025-09-24 06:05:33.197] ubi0:textures is mounted. [2025-09-24 06:05:33.197] RTNETLINK answers: File exists [2025-09-24 06:05:33.263] ubi2:animations is mounted. [2025-09-24 06:05:33.263] ubi1:dml_code is mounted. [2025-09-24 06:05:33.263] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:05:33.263] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:05:33.263] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:05:33.263] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:05:33.263] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:05:33.263] data.LB_FadeInType0=100 [2025-09-24 06:05:33.263] data.CHLH_FadeInType0=0 [2025-09-24 06:05:33.263] data.WU_FadeInDelay=0 [2025-09-24 06:05:33.263] max_time_out=0 [2025-09-24 06:05:33.263] No splash screen [2025-09-24 06:05:33.263] stop dss Done [2025-09-24 06:05:33.294] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:05:33.344] /dev/mem opened. [2025-09-24 06:05:33.344] Memory mapped at address 0xffffb9f31000. [2025-09-24 06:05:33.344] Read at address 0x00600018 (0xffffb9f31018): 0x00000000 [2025-09-24 06:05:33.344] Write at address 0x00600018 (0xffffb9f31018): 0x00400040, readback 0x00400040 [2025-09-24 06:05:33.344] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:05:33.424] Loaded PowerVR consumer services. [2025-09-24 06:05:33.611] Waiting data available... [2025-09-24 06:05:33.611] 512+0 records in [2025-09-24 06:05:33.611] 512+0 records out [2025-09-24 06:05:33.643] Starting syslogd/klogd: done [2025-09-24 06:05:33.659] DML Start [2025-09-24 06:05:33.836] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:05:34.060] DML res1: 0 [2025-09-24 06:05:34.531] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:05:34.531] Read Success [2025-09-24 06:05:34.531] Verifying certificate... [2025-09-24 06:05:34.802] Verified OK [2025-09-24 06:05:34.834] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:05:36.429] Verified OK [2025-09-24 06:05:36.429] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:05:37.069] Verified OK [2025-09-24 06:05:37.069] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:05:39.723] fs.protected_hardlinks = 1 [2025-09-24 06:05:39.723] fs.protected_symlinks = 1 [2025-09-24 06:05:39.739] kernel.modules_disabled = 1 [2025-09-24 06:05:39.931] [2025-09-24 06:05:39.931] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:05:41.156] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:05:48.930] SBL1:1210.0.1.0 [2025-09-24 06:05:48.962] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:05:50.545] SBL2:1210.0.1.0 [2025-09-24 06:05:50.577] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:05:50.689] j-A [2025-09-24 06:05:58.063] The R5 Autosar Classic is running [2025-09-24 06:05:58.063] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:05:58.063] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:05:58.670] INIT: version 2.96 booting [2025-09-24 06:05:58.782] INIT: Entering runlevel: 5 [2025-09-24 06:05:58.925] mtd32 attached [2025-09-24 06:05:58.941] mtd28 attached [2025-09-24 06:05:58.941] mtd24 attached [2025-09-24 06:05:59.006] ubi1:animations is mounted. [2025-09-24 06:05:59.006] RTNETLINK answers: File exists [2025-09-24 06:05:59.069] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:05:59.069] ubi2:textures is mounted. [2025-09-24 06:05:59.069] ubi0:dml_code is mounted. [2025-09-24 06:05:59.069] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:05:59.069] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:05:59.069] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:05:59.069] data.LB_FadeInType0=100 [2025-09-24 06:05:59.069] data.CHLH_FadeInType0=0 [2025-09-24 06:05:59.069] data.WU_FadeInDelay=0 [2025-09-24 06:05:59.069] max_time_out=0 [2025-09-24 06:05:59.069] No splash screen [2025-09-24 06:05:59.069] stop dss Done [2025-09-24 06:05:59.069] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:05:59.101] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:05:59.148] /dev/mem opened. [2025-09-24 06:05:59.148] Memory mapped at address 0xffffb4f77000. [2025-09-24 06:05:59.148] Read at address 0x00600018 (0xffffb4f77018): 0x00000000 [2025-09-24 06:05:59.148] Write at address 0x00600018 (0xffffb4f77018): 0x00400040, readback 0x00400040 [2025-09-24 06:05:59.148] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:05:59.291] Loaded PowerVR consumer services. [2025-09-24 06:05:59.404] Waiting data available... [2025-09-24 06:05:59.404] 512+0 records in [2025-09-24 06:05:59.404] 512+0 records out [2025-09-24 06:05:59.435] Starting syslogd/klogd: done [2025-09-24 06:05:59.452] DML Start [2025-09-24 06:05:59.644] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:05:59.803] DML res1: 0 [2025-09-24 06:06:00.337] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:06:00.337] Read Success [2025-09-24 06:06:00.337] Verifying certificate... [2025-09-24 06:06:00.609] Verified OK [2025-09-24 06:06:00.625] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:06:02.445] Verified OK [2025-09-24 06:06:02.445] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:06:02.979] Verified OK [2025-09-24 06:06:02.979] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:06:05.442] fs.protected_hardlinks = 1 [2025-09-24 06:06:05.442] fs.protected_symlinks = 1 [2025-09-24 06:06:05.458] kernel.modules_disabled = 1 [2025-09-24 06:06:05.635] [2025-09-24 06:06:05.635] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:06:06.876] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:06:14.700] SBL1:1210.0.1.0 [2025-09-24 06:06:14.748] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:06:16.314] SBL2:1210.0.1.0 [2025-09-24 06:06:16.362] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:06:16.475] j-A [2025-09-24 06:06:23.813] The R5 Autosar Classic is running [2025-09-24 06:06:23.843] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:06:23.843] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:06:24.452] INIT: version 2.96 booting [2025-09-24 06:06:24.563] INIT: Entering runlevel: 5 [2025-09-24 06:06:24.723] mtd32 attached [2025-09-24 06:06:24.723] mtd28 attached [2025-09-24 06:06:24.739] mtd24 attached [2025-09-24 06:06:24.848] ubi0:dml_code is mounted. [2025-09-24 06:06:24.848] RTNETLINK answers: File exists [2025-09-24 06:06:24.848] ubi2:textures is mounted. [2025-09-24 06:06:24.848] ubi1:animations is mounted. [2025-09-24 06:06:24.848] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:06:24.848] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:06:24.848] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:06:24.848] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:06:24.848] data.LB_FadeInType0=100 [2025-09-24 06:06:24.848] data.CHLH_FadeInType0=0 [2025-09-24 06:06:24.848] data.WU_FadeInDelay=0 [2025-09-24 06:06:24.848] max_time_out=0 [2025-09-24 06:06:24.848] No splash screen [2025-09-24 06:06:24.848] stop dss Done [2025-09-24 06:06:24.848] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:06:24.896] /dev/mem opened. [2025-09-24 06:06:24.896] Memory mapped at address 0xffff9d4b6000. [2025-09-24 06:06:24.922] Read at address 0x00600018 (0xffff9d4b6018): 0x00000000 [2025-09-24 06:06:24.922] Write at address 0x00600018 (0xffff9d4b6018): 0x00400040, readback 0x00400040 [2025-09-24 06:06:24.922] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:06:24.938] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:06:25.050] Loaded PowerVR consumer services. [2025-09-24 06:06:25.194] Waiting data available... [2025-09-24 06:06:25.194] 512+0 records in [2025-09-24 06:06:25.194] 512+0 records out [2025-09-24 06:06:25.242] Starting syslogd/klogd: done [2025-09-24 06:06:25.258] DML Start [2025-09-24 06:06:25.433] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:06:25.625] DML res1: 0 [2025-09-24 06:06:26.055] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:06:26.055] Read Success [2025-09-24 06:06:26.055] Verifying certificate... [2025-09-24 06:06:26.343] Verified OK [2025-09-24 06:06:26.359] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:06:27.853] Verified OK [2025-09-24 06:06:27.853] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:06:28.461] Verified OK [2025-09-24 06:06:28.461] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:06:31.275] fs.protected_hardlinks = 1 [2025-09-24 06:06:31.275] fs.protected_symlinks = 1 [2025-09-24 06:06:31.291] kernel.modules_disabled = 1 [2025-09-24 06:06:31.483] [2025-09-24 06:06:31.483] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:06:32.697] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:06:40.532] SBL1:1210.0.1.0 [2025-09-24 06:06:40.580] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:06:42.148] SBL2:1210.0.1.0 [2025-09-24 06:06:42.196] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:06:42.291] j-A [2025-09-24 06:06:49.645] The R5 Autosar Classic is running [2025-09-24 06:06:49.667] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:06:49.667] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:06:50.274] INIT: version 2.96 booting [2025-09-24 06:06:50.387] INIT: Entering runlevel: 5 [2025-09-24 06:06:50.530] mtd24 attached [2025-09-24 06:06:50.546] mtd32 attached [2025-09-24 06:06:50.562] mtd28 attached [2025-09-24 06:06:50.594] ubi0:textures is mounted. [2025-09-24 06:06:50.610] RTNETLINK answers: File exists [2025-09-24 06:06:50.668] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:06:50.668] ubi1:dml_code is mounted. [2025-09-24 06:06:50.668] ubi2:animations is mounted. [2025-09-24 06:06:50.668] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:06:50.668] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:06:50.668] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:06:50.668] data.LB_FadeInType0=100 [2025-09-24 06:06:50.668] data.CHLH_FadeInType0=0 [2025-09-24 06:06:50.668] data.WU_FadeInDelay=0 [2025-09-24 06:06:50.668] max_time_out=0 [2025-09-24 06:06:50.668] No splash screen [2025-09-24 06:06:50.668] stop dss Done [2025-09-24 06:06:50.668] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:06:50.700] /dev/mem opened. [2025-09-24 06:06:50.700] Memory mapped at address 0xffffa32ac000. [2025-09-24 06:06:50.727] Read at address 0x00600018 (0xffffa32ac018): 0x00000000 [2025-09-24 06:06:50.727] Write at address 0x00600018 (0xffffa32ac018): 0x00400040, readback 0x00400040 [2025-09-24 06:06:50.774] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:06:50.790] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:06:50.918] Loaded PowerVR consumer services. [2025-09-24 06:06:51.014] Waiting data available... [2025-09-24 06:06:51.030] 512+0 records in [2025-09-24 06:06:51.030] 512+0 records out [2025-09-24 06:06:51.062] Starting syslogd/klogd: done [2025-09-24 06:06:51.078] DML Start [2025-09-24 06:06:51.270] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:06:51.478] DML res1: 0 [2025-09-24 06:06:51.914] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:06:51.914] Read Success [2025-09-24 06:06:51.914] Verifying certificate... [2025-09-24 06:06:52.186] Verified OK [2025-09-24 06:06:52.202] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:06:53.800] Verified OK [2025-09-24 06:06:53.816] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:06:54.456] Verified OK [2025-09-24 06:06:54.456] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:06:57.093] fs.protected_hardlinks = 1 [2025-09-24 06:06:57.110] fs.protected_symlinks = 1 [2025-09-24 06:06:57.110] kernel.modules_disabled = 1 [2025-09-24 06:06:57.301] [2025-09-24 06:06:57.301] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:06:58.508] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:07:06.373] SBL1:1210.0.1.0 [2025-09-24 06:07:06.405] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:07:07.988] SBL2:1210.0.1.0 [2025-09-24 06:07:08.020] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:07:08.132] j-A [2025-09-24 06:07:15.506] The R5 Autosar Classic is running [2025-09-24 06:07:15.506] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:07:15.506] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:07:16.113] INIT: version 2.96 booting [2025-09-24 06:07:16.224] INIT: Entering runlevel: 5 [2025-09-24 06:07:16.368] mtd24 attached [2025-09-24 06:07:16.384] mtd32 attached [2025-09-24 06:07:16.400] mtd28 attached [2025-09-24 06:07:16.400] ubi0:textures is mounted. [2025-09-24 06:07:16.449] ubi1:dml_code is mounted. [2025-09-24 06:07:16.449] RTNETLINK answers: File exists [2025-09-24 06:07:16.500] ubi2:animations is mounted. [2025-09-24 06:07:16.500] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:07:16.500] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:07:16.500] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:07:16.500] data.LB_FadeInType0=100 [2025-09-24 06:07:16.500] data.CHLH_FadeInType0=0 [2025-09-24 06:07:16.500] data.WU_FadeInDelay=0 [2025-09-24 06:07:16.500] max_time_out=0 [2025-09-24 06:07:16.500] No splash screen [2025-09-24 06:07:16.500] stop dss Done [2025-09-24 06:07:16.500] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:07:16.516] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:07:16.581] /dev/mem opened. [2025-09-24 06:07:16.581] Memory mapped at address 0xffffb2694000. [2025-09-24 06:07:16.581] Read at address 0x00600018 (0xffffb2694018): 0x00000000 [2025-09-24 06:07:16.581] Write at address 0x00600018 (0xffffb2694018): 0x00400040, readback 0x00400040 [2025-09-24 06:07:16.581] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:07:16.613] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:07:16.805] Loaded PowerVR consumer services. [2025-09-24 06:07:16.868] Waiting data available... [2025-09-24 06:07:16.900] 512+0 records in [2025-09-24 06:07:16.900] 512+0 records out [2025-09-24 06:07:16.932] Starting syslogd/klogd: done [2025-09-24 06:07:16.948] DML Start [2025-09-24 06:07:17.141] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:07:17.349] DML res1: 0 [2025-09-24 06:07:17.755] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:07:17.755] Read Success [2025-09-24 06:07:17.755] Verifying certificate... [2025-09-24 06:07:18.011] Verified OK [2025-09-24 06:07:18.027] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:07:19.745] Verified OK [2025-09-24 06:07:19.745] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:07:20.321] Verified OK [2025-09-24 06:07:20.321] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:07:22.814] fs.protected_hardlinks = 1 [2025-09-24 06:07:22.830] fs.protected_symlinks = 1 [2025-09-24 06:07:22.830] kernel.modules_disabled = 1 [2025-09-24 06:07:23.038] [2025-09-24 06:07:23.038] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:07:24.390] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:07:32.182] SBL1:1210.0.1.0 [2025-09-24 06:07:32.230] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:07:33.797] SBL2:1210.0.1.0 [2025-09-24 06:07:33.844] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:07:33.940] j-A [2025-09-24 06:07:41.296] The R5 Autosar Classic is running [2025-09-24 06:07:41.317] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:07:41.317] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:07:41.925] INIT: version 2.96 booting [2025-09-24 06:07:42.036] INIT: Entering runlevel: 5 [2025-09-24 06:07:42.196] mtd24 attached [2025-09-24 06:07:42.196] mtd28 attached [2025-09-24 06:07:42.213] mtd32 attached [2025-09-24 06:07:42.261] RTNETLINK answers: File exists [2025-09-24 06:07:42.325] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:07:42.325] ubi1:animations is mounted. [2025-09-24 06:07:42.325] ubi0:textures is mounted. [2025-09-24 06:07:42.325] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:07:42.325] ubi2:dml_code is mounted. [2025-09-24 06:07:42.325] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:07:42.325] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:07:42.325] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:07:42.325] data.LB_FadeInType0=100 [2025-09-24 06:07:42.325] data.CHLH_FadeInType0=0 [2025-09-24 06:07:42.325] data.WU_FadeInDelay=0 [2025-09-24 06:07:42.325] max_time_out=0 [2025-09-24 06:07:42.325] No splash screen [2025-09-24 06:07:42.325] stop dss Done [2025-09-24 06:07:42.400] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:07:42.400] /dev/mem opened. [2025-09-24 06:07:42.400] Memory mapped at address 0xffffb1420000. [2025-09-24 06:07:42.400] Read at address 0x00600018 (0xffffb1420018): 0x00000000 [2025-09-24 06:07:42.400] Write at address 0x00600018 (0xffffb1420018): 0x00400040, readback 0x00400040 [2025-09-24 06:07:42.400] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:07:42.543] Loaded PowerVR consumer services. [2025-09-24 06:07:42.672] Waiting data available... [2025-09-24 06:07:42.688] 512+0 records in [2025-09-24 06:07:42.688] 512+0 records out [2025-09-24 06:07:42.736] Starting syslogd/klogd: done [2025-09-24 06:07:42.752] DML Start [2025-09-24 06:07:42.944] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:07:43.183] DML res1: 0 [2025-09-24 06:07:43.625] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:07:43.625] Read Success [2025-09-24 06:07:43.626] Verifying certificate... [2025-09-24 06:07:43.897] Verified OK [2025-09-24 06:07:43.961] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:07:45.526] Verified OK [2025-09-24 06:07:45.526] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:07:46.213] Verified OK [2025-09-24 06:07:46.213] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:07:48.868] fs.protected_hardlinks = 1 [2025-09-24 06:07:48.868] fs.protected_symlinks = 1 [2025-09-24 06:07:48.883] kernel.modules_disabled = 1 [2025-09-24 06:07:49.075] [2025-09-24 06:07:49.075] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:07:50.227] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:07:57.988] SBL1:1210.0.1.0 [2025-09-24 06:07:58.036] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:07:59.603] SBL2:1210.0.1.0 [2025-09-24 06:07:59.651] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:07:59.746] j-A [2025-09-24 06:08:07.103] The R5 Autosar Classic is running [2025-09-24 06:08:07.127] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:08:07.127] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:08:07.735] INIT: version 2.96 booting [2025-09-24 06:08:07.846] INIT: Entering runlevel: 5 [2025-09-24 06:08:08.007] mtd28 attached [2025-09-24 06:08:08.007] mtd24 attached [2025-09-24 06:08:08.022] mtd32 attached [2025-09-24 06:08:08.070] RTNETLINK answers: File exists [2025-09-24 06:08:08.070] ubi0:animations is mounted. [2025-09-24 06:08:08.112] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:08:08.112] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:08:08.112] ubi1:textures is mounted. [2025-09-24 06:08:08.112] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:08:08.112] ubi2:dml_code is mounted. [2025-09-24 06:08:08.112] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:08:08.112] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:08:08.134] data.LB_FadeInType0=100 [2025-09-24 06:08:08.134] data.CHLH_FadeInType0=0 [2025-09-24 06:08:08.134] data.WU_FadeInDelay=0 [2025-09-24 06:08:08.134] max_time_out=0 [2025-09-24 06:08:08.134] No splash screen [2025-09-24 06:08:08.134] stop dss Done [2025-09-24 06:08:08.182] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:08:08.219] /dev/mem opened. [2025-09-24 06:08:08.219] Memory mapped at address 0xffffbceef000. [2025-09-24 06:08:08.219] Read at address 0x00600018 (0xffffbceef018): 0x00000000 [2025-09-24 06:08:08.219] Write at address 0x00600018 (0xffffbceef018): 0x00400040, readback 0x00400040 [2025-09-24 06:08:08.219] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:08:08.332] Loaded PowerVR consumer services. [2025-09-24 06:08:08.475] Waiting data available... [2025-09-24 06:08:08.491] 512+0 records in [2025-09-24 06:08:08.491] 512+0 records out [2025-09-24 06:08:08.538] Starting syslogd/klogd: done [2025-09-24 06:08:08.554] DML Start [2025-09-24 06:08:08.747] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:08:08.971] DML res1: 0 [2025-09-24 06:08:09.396] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:08:09.396] Read Success [2025-09-24 06:08:09.396] Verifying certificate... [2025-09-24 06:08:09.636] Verified OK [2025-09-24 06:08:09.652] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:08:11.309] Verified OK [2025-09-24 06:08:11.309] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:08:11.875] Verified OK [2025-09-24 06:08:11.875] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:08:14.482] fs.protected_hardlinks = 1 [2025-09-24 06:08:14.482] fs.protected_symlinks = 1 [2025-09-24 06:08:14.498] kernel.modules_disabled = 1 [2025-09-24 06:08:14.689] [2025-09-24 06:08:14.689] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:08:15.999] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:08:23.823] SBL1:1210.0.1.0 [2025-09-24 06:08:23.855] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:08:25.438] SBL2:1210.0.1.0 [2025-09-24 06:08:25.470] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:08:25.582] j-A [2025-09-24 06:08:32.953] The R5 Autosar Classic is running [2025-09-24 06:08:32.953] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:08:32.953] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:08:33.560] INIT: version 2.96 booting [2025-09-24 06:08:33.672] INIT: Entering runlevel: 5 [2025-09-24 06:08:33.833] mtd28 attached [2025-09-24 06:08:33.833] mtd32 attached [2025-09-24 06:08:33.848] mtd24 attached [2025-09-24 06:08:33.880] ubi0:animations is mounted. [2025-09-24 06:08:33.961] RTNETLINK answers: File exists [2025-09-24 06:08:33.961] ubi1:dml_code is mounted. [2025-09-24 06:08:33.961] ubi2:textures is mounted. [2025-09-24 06:08:33.961] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:08:33.961] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:08:33.961] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:08:33.961] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:08:33.961] data.LB_FadeInType0=100 [2025-09-24 06:08:33.961] data.CHLH_FadeInType0=0 [2025-09-24 06:08:33.961] data.WU_FadeInDelay=0 [2025-09-24 06:08:33.961] max_time_out=0 [2025-09-24 06:08:33.961] No splash screen [2025-09-24 06:08:33.961] stop dss Done [2025-09-24 06:08:33.961] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:08:34.009] /dev/mem opened. [2025-09-24 06:08:34.009] Memory mapped at address 0xffffa8768000. [2025-09-24 06:08:34.050] Read at address 0x00600018 (0xffffa8768018): 0x00000000 [2025-09-24 06:08:34.050] Write at address 0x00600018 (0xffffa8768018): 0x00400040, readback 0x00400040 [2025-09-24 06:08:34.050] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:08:34.082] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:08:34.301] Loaded PowerVR consumer services. [2025-09-24 06:08:34.301] Waiting data available... [2025-09-24 06:08:34.317] 512+0 records in [2025-09-24 06:08:34.317] 512+0 records out [2025-09-24 06:08:34.349] Starting syslogd/klogd: done [2025-09-24 06:08:34.365] DML Start [2025-09-24 06:08:34.509] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:08:34.701] DML res1: 0 [2025-09-24 06:08:35.319] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:08:35.319] Read Success [2025-09-24 06:08:35.319] Verifying certificate... [2025-09-24 06:08:35.575] Verified OK [2025-09-24 06:08:35.591] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:08:37.276] Verified OK [2025-09-24 06:08:37.276] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:08:37.912] Verified OK [2025-09-24 06:08:37.912] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:08:40.469] fs.protected_hardlinks = 1 [2025-09-24 06:08:40.469] fs.protected_symlinks = 1 [2025-09-24 06:08:40.469] kernel.modules_disabled = 1 [2025-09-24 06:08:40.677] [2025-09-24 06:08:40.677] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:08:41.860] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:08:49.595] SBL1:1210.0.1.0 [2025-09-24 06:08:49.643] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:08:51.211] SBL2:1210.0.1.0 [2025-09-24 06:08:51.259] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:08:51.370] j-A [2025-09-24 06:08:58.710] The R5 Autosar Classic is running [2025-09-24 06:08:58.735] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:08:58.735] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:08:59.343] INIT: version 2.96 booting [2025-09-24 06:08:59.455] INIT: Entering runlevel: 5 [2025-09-24 06:08:59.615] mtd28 attached [2025-09-24 06:08:59.615] mtd24 attached [2025-09-24 06:08:59.631] mtd32 attached [2025-09-24 06:08:59.679] RTNETLINK answers: File exists [2025-09-24 06:08:59.679] ubi1:textures is mounted. [2025-09-24 06:08:59.742] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:08:59.742] ubi0:animations is mounted. [2025-09-24 06:08:59.742] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:08:59.742] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:08:59.742] ubi2:dml_code is mounted. [2025-09-24 06:08:59.742] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:08:59.742] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:08:59.742] data.LB_FadeInType0=100 [2025-09-24 06:08:59.742] data.CHLH_FadeInType0=0 [2025-09-24 06:08:59.742] data.WU_FadeInDelay=0 [2025-09-24 06:08:59.742] max_time_out=0 [2025-09-24 06:08:59.742] No splash screen [2025-09-24 06:08:59.742] stop dss Done [2025-09-24 06:08:59.758] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:08:59.774] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:08:59.790] /dev/mem opened. [2025-09-24 06:08:59.790] Memory mapped at address 0xffffabbc7000. [2025-09-24 06:08:59.816] Read at address 0x00600018 (0xffffabbc7018): 0x00000000 [2025-09-24 06:08:59.816] Write at address 0x00600018 (0xffffabbc7018): 0x00400040, readback 0x00400040 [2025-09-24 06:08:59.896] Loaded PowerVR consumer services. [2025-09-24 06:09:00.072] Waiting data available... [2025-09-24 06:09:00.088] 512+0 records in [2025-09-24 06:09:00.088] 512+0 records out [2025-09-24 06:09:00.136] Starting syslogd/klogd: done [2025-09-24 06:09:00.152] DML Start [2025-09-24 06:09:00.327] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:09:00.567] DML res1: 0 [2025-09-24 06:09:00.919] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:09:00.940] Read Success [2025-09-24 06:09:00.940] Verifying certificate... [2025-09-24 06:09:01.212] Verified OK [2025-09-24 06:09:01.228] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:09:02.827] Verified OK [2025-09-24 06:09:02.827] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:09:03.498] Verified OK [2025-09-24 06:09:03.498] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:09:06.248] fs.protected_hardlinks = 1 [2025-09-24 06:09:06.264] fs.protected_symlinks = 1 [2025-09-24 06:09:06.264] kernel.modules_disabled = 1 [2025-09-24 06:09:06.472] [2025-09-24 06:09:06.472] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:09:07.655] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:09:15.414] SBL1:1210.0.1.0 [2025-09-24 06:09:15.446] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:09:17.029] SBL2:1210.0.1.0 [2025-09-24 06:09:17.060] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:09:17.173] j-A [2025-09-24 06:09:24.529] The R5 Autosar Classic is running [2025-09-24 06:09:24.529] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:09:24.550] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:09:25.158] INIT: version 2.96 booting [2025-09-24 06:09:25.269] INIT: Entering runlevel: 5 [2025-09-24 06:09:25.413] mtd28 attached [2025-09-24 06:09:25.430] mtd32 attached [2025-09-24 06:09:25.430] mtd24 attached [2025-09-24 06:09:25.525] RTNETLINK answers: File exists [2025-09-24 06:09:25.525] ubi0:animations is mounted. [2025-09-24 06:09:25.525] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:09:25.525] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:09:25.525] ubi1:dml_code is mounted. [2025-09-24 06:09:25.525] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:09:25.525] ubi2:textures is mounted. [2025-09-24 06:09:25.525] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:09:25.525] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:09:25.540] data.LB_FadeInType0=100 [2025-09-24 06:09:25.583] data.CHLH_FadeInType0=0 [2025-09-24 06:09:25.583] data.WU_FadeInDelay=0 [2025-09-24 06:09:25.583] max_time_out=0 [2025-09-24 06:09:25.583] No splash screen [2025-09-24 06:09:25.583] stop dss Done [2025-09-24 06:09:25.583] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:09:25.583] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:09:25.598] /dev/mem opened. [2025-09-24 06:09:25.598] Memory mapped at address 0xffff97683000. [2025-09-24 06:09:25.624] Read at address 0x00600018 (0xffff97683018): 0x00000000 [2025-09-24 06:09:25.624] Write at address 0x00600018 (0xffff97683018): 0x00400040, readback 0x00400040 [2025-09-24 06:09:25.688] Loaded PowerVR consumer services. [2025-09-24 06:09:25.880] Waiting data available... [2025-09-24 06:09:25.896] 512+0 records in [2025-09-24 06:09:25.896] 512+0 records out [2025-09-24 06:09:25.944] Starting syslogd/klogd: done [2025-09-24 06:09:25.960] DML Start [2025-09-24 06:09:26.152] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:09:26.360] DML res1: 0 [2025-09-24 06:09:26.792] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:09:26.813] Read Success [2025-09-24 06:09:26.813] Verifying certificate... [2025-09-24 06:09:27.085] Verified OK [2025-09-24 06:09:27.101] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:09:28.716] Verified OK [2025-09-24 06:09:28.732] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:09:29.260] Verified OK [2025-09-24 06:09:29.260] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:09:31.978] fs.protected_hardlinks = 1 [2025-09-24 06:09:31.994] fs.protected_symlinks = 1 [2025-09-24 06:09:31.994] kernel.modules_disabled = 1 [2025-09-24 06:09:32.187] [2025-09-24 06:09:32.187] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:09:33.380] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:09:41.218] SBL1:1210.0.1.0 [2025-09-24 06:09:41.266] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:09:42.832] SBL2:1210.0.1.0 [2025-09-24 06:09:42.880] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:09:42.992] j-A [2025-09-24 06:09:50.332] The R5 Autosar Classic is running [2025-09-24 06:09:50.363] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:09:50.363] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:09:50.970] INIT: version 2.96 booting [2025-09-24 06:09:51.082] INIT: Entering runlevel: 5 [2025-09-24 06:09:51.242] mtd28 attached [2025-09-24 06:09:51.242] mtd32 attached [2025-09-24 06:09:51.258] mtd24 attached [2025-09-24 06:09:51.274] ubi0:animations is mounted. [2025-09-24 06:09:51.306] RTNETLINK answers: File exists [2025-09-24 06:09:51.365] ubi2:textures is mounted. [2025-09-24 06:09:51.365] ubi1:dml_code is mounted. [2025-09-24 06:09:51.365] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:09:51.365] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:09:51.365] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:09:51.365] data.LB_FadeInType0=100 [2025-09-24 06:09:51.365] data.CHLH_FadeInType0=0 [2025-09-24 06:09:51.365] data.WU_FadeInDelay=0 [2025-09-24 06:09:51.365] max_time_out=0 [2025-09-24 06:09:51.365] No splash screen [2025-09-24 06:09:51.365] stop dss Done [2025-09-24 06:09:51.365] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:09:51.365] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:09:51.434] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:09:51.434] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:09:51.434] /dev/mem opened. [2025-09-24 06:09:51.434] Memory mapped at address 0xffffb52c3000. [2025-09-24 06:09:51.434] Read at address 0x00600018 (0xffffb52c3018): 0x00000000 [2025-09-24 06:09:51.434] Write at address 0x00600018 (0xffffb52c3018): 0x00400040, readback 0x00400040 [2025-09-24 06:09:51.578] Loaded PowerVR consumer services. [2025-09-24 06:09:51.705] Waiting data available... [2025-09-24 06:09:51.738] 512+0 records in [2025-09-24 06:09:51.738] 512+0 records out [2025-09-24 06:09:51.786] Starting syslogd/klogd: done [2025-09-24 06:09:51.802] DML Start [2025-09-24 06:09:51.962] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:09:52.202] DML res1: 0 [2025-09-24 06:09:52.695] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:09:52.695] Read Success [2025-09-24 06:09:52.695] Verifying certificate... [2025-09-24 06:09:52.919] Verified OK [2025-09-24 06:09:52.951] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:09:54.678] Verified OK [2025-09-24 06:09:54.678] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:09:55.231] Verified OK [2025-09-24 06:09:55.231] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:09:57.677] fs.protected_hardlinks = 1 [2025-09-24 06:09:57.693] fs.protected_symlinks = 1 [2025-09-24 06:09:57.693] kernel.modules_disabled = 1 [2025-09-24 06:09:57.902] [2025-09-24 06:09:57.902] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:09:59.256] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:10:07.039] SBL1:1210.0.1.0 [2025-09-24 06:10:07.071] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:10:08.654] SBL2:1210.0.1.0 [2025-09-24 06:10:08.686] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:10:08.798] j-A [2025-09-24 06:10:16.170] The R5 Autosar Classic is running [2025-09-24 06:10:16.170] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:10:16.170] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:10:16.777] INIT: version 2.96 booting [2025-09-24 06:10:16.890] INIT: Entering runlevel: 5 [2025-09-24 06:10:17.033] mtd24 attached [2025-09-24 06:10:17.049] mtd32 attached [2025-09-24 06:10:17.065] mtd28 attached [2025-09-24 06:10:17.097] ubi0:textures is mounted. [2025-09-24 06:10:17.169] RTNETLINK answers: File exists [2025-09-24 06:10:17.169] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:10:17.169] ubi1:dml_code is mounted. [2025-09-24 06:10:17.169] ubi2:animations is mounted. [2025-09-24 06:10:17.169] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:10:17.169] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:10:17.169] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:10:17.169] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:10:17.169] data.LB_FadeInType0=100 [2025-09-24 06:10:17.169] data.CHLH_FadeInType0=0 [2025-09-24 06:10:17.169] data.WU_FadeInDelay=0 [2025-09-24 06:10:17.169] max_time_out=0 [2025-09-24 06:10:17.169] No splash screen [2025-09-24 06:10:17.169] stop dss Done [2025-09-24 06:10:17.240] /dev/mem opened. [2025-09-24 06:10:17.240] Memory mapped at address 0xffff99b3f000. [2025-09-24 06:10:17.240] Read at address 0x00600018 (0xffff99b3f018): 0x00000000 [2025-09-24 06:10:17.240] Write at address 0x00600018 (0xffff99b3f018): 0x00400040, readback 0x00400040 [2025-09-24 06:10:17.270] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:10:17.270] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:10:17.478] Waiting data available... [2025-09-24 06:10:17.494] Loaded PowerVR consumer services. [2025-09-24 06:10:17.510] 512+0 records in [2025-09-24 06:10:17.526] 512+0 records out [2025-09-24 06:10:17.558] Starting syslogd/klogd: done [2025-09-24 06:10:17.574] DML Start [2025-09-24 06:10:17.718] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:10:17.974] DML res1: 0 [2025-09-24 06:10:18.428] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:10:18.428] Read Success [2025-09-24 06:10:18.428] Verifying certificate... [2025-09-24 06:10:18.651] Verified OK [2025-09-24 06:10:18.667] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:10:20.482] Verified OK [2025-09-24 06:10:20.482] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:10:21.067] Verified OK [2025-09-24 06:10:21.067] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:10:23.595] fs.protected_hardlinks = 1 [2025-09-24 06:10:23.611] fs.protected_symlinks = 1 [2025-09-24 06:10:23.611] kernel.modules_disabled = 1 [2025-09-24 06:10:23.803] [2025-09-24 06:10:23.803] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:10:25.010] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:10:32.843] SBL1:1210.0.1.0 [2025-09-24 06:10:32.875] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:10:34.458] SBL2:1210.0.1.0 [2025-09-24 06:10:34.490] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:10:34.602] j-A [2025-09-24 06:10:41.973] The R5 Autosar Classic is running [2025-09-24 06:10:41.973] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:10:41.973] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:10:42.581] INIT: version 2.96 booting [2025-09-24 06:10:42.692] INIT: Entering runlevel: 5 [2025-09-24 06:10:42.837] mtd28 attached [2025-09-24 06:10:42.853] mtd32 attached [2025-09-24 06:10:42.868] mtd24 attached [2025-09-24 06:10:42.900] ubi0:animations is mounted. [2025-09-24 06:10:42.916] RTNETLINK answers: File exists [2025-09-24 06:10:42.916] ubi1:dml_code is mounted. [2025-09-24 06:10:42.955] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:10:42.955] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:10:42.955] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:10:42.955] ubi2:textures is mounted. [2025-09-24 06:10:42.955] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:10:42.955] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:10:42.982] data.LB_FadeInType0=100 [2025-09-24 06:10:42.982] data.CHLH_FadeInType0=0 [2025-09-24 06:10:42.982] data.WU_FadeInDelay=0 [2025-09-24 06:10:42.982] max_time_out=0 [2025-09-24 06:10:42.982] No splash screen [2025-09-24 06:10:42.982] stop dss Done [2025-09-24 06:10:43.010] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:10:43.010] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:10:43.061] /dev/mem opened. [2025-09-24 06:10:43.061] Memory mapped at address 0xffff93de7000. [2025-09-24 06:10:43.061] Read at address 0x00600018 (0xffff93de7018): 0x00000000 [2025-09-24 06:10:43.061] Write at address 0x00600018 (0xffff93de7018): 0x00400040, readback 0x00400040 [2025-09-24 06:10:43.156] Loaded PowerVR consumer services. [2025-09-24 06:10:43.300] Waiting data available... [2025-09-24 06:10:43.317] 512+0 records in [2025-09-24 06:10:43.317] 512+0 records out [2025-09-24 06:10:43.348] Starting syslogd/klogd: done [2025-09-24 06:10:43.364] DML Start [2025-09-24 06:10:43.540] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:10:43.747] DML res1: 0 [2025-09-24 06:10:44.285] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:10:44.285] Read Success [2025-09-24 06:10:44.285] Verifying certificate... [2025-09-24 06:10:44.509] Verified OK [2025-09-24 06:10:44.525] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:10:46.260] Verified OK [2025-09-24 06:10:46.260] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:10:46.843] Verified OK [2025-09-24 06:10:46.843] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:10:49.354] fs.protected_hardlinks = 1 [2025-09-24 06:10:49.370] fs.protected_symlinks = 1 [2025-09-24 06:10:49.370] kernel.modules_disabled = 1 [2025-09-24 06:10:49.561] [2025-09-24 06:10:49.561] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:10:50.791] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:10:58.637] SBL1:1210.0.1.0 [2025-09-24 06:10:58.685] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:11:00.251] SBL2:1210.0.1.0 [2025-09-24 06:11:00.299] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:11:00.395] j-A [2025-09-24 06:11:07.749] The R5 Autosar Classic is running [2025-09-24 06:11:07.771] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:11:07.771] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:11:08.377] INIT: version 2.96 booting [2025-09-24 06:11:08.490] INIT: Entering runlevel: 5 [2025-09-24 06:11:08.650] mtd24 attached [2025-09-24 06:11:08.650] mtd32 attached [2025-09-24 06:11:08.666] mtd28 attached [2025-09-24 06:11:08.698] ubi0:textures is mounted. [2025-09-24 06:11:08.713] ubi1:dml_code is mounted. [2025-09-24 06:11:08.781] RTNETLINK answers: File exists [2025-09-24 06:11:08.781] ubi2:animations is mounted. [2025-09-24 06:11:08.781] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:11:08.781] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:11:08.781] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:11:08.781] data.LB_FadeInType0=100 [2025-09-24 06:11:08.781] data.CHLH_FadeInType0=0 [2025-09-24 06:11:08.781] data.WU_FadeInDelay=0 [2025-09-24 06:11:08.781] max_time_out=0 [2025-09-24 06:11:08.781] No splash screen [2025-09-24 06:11:08.781] stop dss Done [2025-09-24 06:11:08.781] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:11:08.781] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:11:08.813] /dev/mem opened. [2025-09-24 06:11:08.855] Memory mapped at address 0xffff80bd4000. [2025-09-24 06:11:08.855] Read at address 0x00600018 (0xffff80bd4018): 0x00000000 [2025-09-24 06:11:08.855] Write at address 0x00600018 (0xffff80bd4018): 0x00400040, readback 0x00400040 [2025-09-24 06:11:08.855] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:11:08.855] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:11:08.967] Loaded PowerVR consumer services. [2025-09-24 06:11:09.110] Waiting data available... [2025-09-24 06:11:09.126] 512+0 records in [2025-09-24 06:11:09.126] 512+0 records out [2025-09-24 06:11:09.174] Starting syslogd/klogd: done [2025-09-24 06:11:09.190] DML Start [2025-09-24 06:11:09.398] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:11:09.606] DML res1: 0 [2025-09-24 06:11:10.045] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:11:10.045] Read Success [2025-09-24 06:11:10.045] Verifying certificate... [2025-09-24 06:11:10.284] Verified OK [2025-09-24 06:11:10.300] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:11:12.064] Verified OK [2025-09-24 06:11:12.064] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:11:12.570] Verified OK [2025-09-24 06:11:12.570] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:11:15.111] fs.protected_hardlinks = 1 [2025-09-24 06:11:15.111] fs.protected_symlinks = 1 [2025-09-24 06:11:15.111] kernel.modules_disabled = 1 [2025-09-24 06:11:15.303] [2025-09-24 06:11:15.303] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:11:16.678] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:11:24.436] SBL1:1210.0.1.0 [2025-09-24 06:11:24.468] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:11:26.051] SBL2:1210.0.1.0 [2025-09-24 06:11:26.083] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:11:26.195] j-A [2025-09-24 06:11:33.571] The R5 Autosar Classic is running [2025-09-24 06:11:33.571] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:11:33.571] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:11:34.178] INIT: version 2.96 booting [2025-09-24 06:11:34.273] INIT: Entering runlevel: 5 [2025-09-24 06:11:34.433] mtd32 attached [2025-09-24 06:11:34.449] mtd28 attached [2025-09-24 06:11:34.465] mtd24 attached [2025-09-24 06:11:34.569] RTNETLINK answers: File exists [2025-09-24 06:11:34.569] ubi1:animations is mounted. [2025-09-24 06:11:34.569] ubi0:dml_code is mounted. [2025-09-24 06:11:34.569] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:11:34.569] ubi2:textures is mounted. [2025-09-24 06:11:34.569] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:11:34.569] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:11:34.569] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:11:34.569] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:11:34.569] data.LB_FadeInType0=100 [2025-09-24 06:11:34.569] data.CHLH_FadeInType0=0 [2025-09-24 06:11:34.569] data.WU_FadeInDelay=0 [2025-09-24 06:11:34.569] max_time_out=0 [2025-09-24 06:11:34.569] No splash screen [2025-09-24 06:11:34.569] stop dss Done [2025-09-24 06:11:34.616] /dev/mem opened. [2025-09-24 06:11:34.616] Memory mapped at address 0xffffa56b0000. [2025-09-24 06:11:34.649] Read at address 0x00600018 (0xffffa56b0018): 0x00000000 [2025-09-24 06:11:34.649] Write at address 0x00600018 (0xffffa56b0018): 0x00400040, readback 0x00400040 [2025-09-24 06:11:34.649] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:11:34.649] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:11:34.857] Loaded PowerVR consumer services. [2025-09-24 06:11:34.905] Waiting data available... [2025-09-24 06:11:34.921] 512+0 records in [2025-09-24 06:11:34.921] 512+0 records out [2025-09-24 06:11:34.968] Starting syslogd/klogd: done [2025-09-24 06:11:34.984] DML Start [2025-09-24 06:11:35.176] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:11:35.385] DML res1: 0 [2025-09-24 06:11:35.830] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:11:35.830] Read Success [2025-09-24 06:11:35.830] Verifying certificate... [2025-09-24 06:11:36.085] Verified OK [2025-09-24 06:11:36.101] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:11:37.772] Verified OK [2025-09-24 06:11:37.772] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:11:38.388] Verified OK [2025-09-24 06:11:38.388] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:11:41.073] fs.protected_hardlinks = 1 [2025-09-24 06:11:41.089] fs.protected_symlinks = 1 [2025-09-24 06:11:41.089] kernel.modules_disabled = 1 [2025-09-24 06:11:41.281] [2025-09-24 06:11:41.281] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:11:42.470] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:11:50.229] SBL1:1210.0.1.0 [2025-09-24 06:11:50.261] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:11:51.845] SBL2:1210.0.1.0 [2025-09-24 06:11:51.876] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:11:51.988] j-A [2025-09-24 06:11:59.343] The R5 Autosar Classic is running [2025-09-24 06:11:59.343] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:11:59.364] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:11:59.972] INIT: version 2.96 booting [2025-09-24 06:12:00.083] INIT: Entering runlevel: 5 [2025-09-24 06:12:00.228] mtd24 attached [2025-09-24 06:12:00.244] mtd28 attached [2025-09-24 06:12:00.260] mtd32 attached [2025-09-24 06:12:00.340] RTNETLINK answers: File exists [2025-09-24 06:12:00.340] ubi1:animations is mounted. [2025-09-24 06:12:00.340] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:12:00.340] ubi0:textures is mounted. [2025-09-24 06:12:00.340] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:12:00.340] ubi2:dml_code is mounted. [2025-09-24 06:12:00.340] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:12:00.340] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:12:00.340] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:12:00.366] data.LB_FadeInType0=100 [2025-09-24 06:12:00.366] data.CHLH_FadeInType0=0 [2025-09-24 06:12:00.366] data.WU_FadeInDelay=0 [2025-09-24 06:12:00.366] max_time_out=0 [2025-09-24 06:12:00.366] No splash screen [2025-09-24 06:12:00.366] stop dss Done [2025-09-24 06:12:00.452] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:12:00.452] /dev/mem opened. [2025-09-24 06:12:00.452] Memory mapped at address 0xffff8c005000. [2025-09-24 06:12:00.452] Read at address 0x00600018 (0xffff8c005018): 0x00000000 [2025-09-24 06:12:00.452] Write at address 0x00600018 (0xffff8c005018): 0x00400040, readback 0x00400040 [2025-09-24 06:12:00.452] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:12:00.676] Loaded PowerVR consumer services. [2025-09-24 06:12:00.708] Waiting data available... [2025-09-24 06:12:00.724] 512+0 records in [2025-09-24 06:12:00.724] 512+0 records out [2025-09-24 06:12:00.772] Starting syslogd/klogd: done [2025-09-24 06:12:00.788] DML Start [2025-09-24 06:12:00.996] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:12:01.204] DML res1: 0 [2025-09-24 06:12:01.645] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:12:01.645] Read Success [2025-09-24 06:12:01.645] Verifying certificate... [2025-09-24 06:12:01.901] Verified OK [2025-09-24 06:12:01.917] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:12:03.627] Verified OK [2025-09-24 06:12:03.627] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:12:04.216] Verified OK [2025-09-24 06:12:04.216] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:12:06.775] fs.protected_hardlinks = 1 [2025-09-24 06:12:06.775] fs.protected_symlinks = 1 [2025-09-24 06:12:06.791] kernel.modules_disabled = 1 [2025-09-24 06:12:06.983] [2025-09-24 06:12:06.983] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:12:08.261] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:12:16.052] SBL1:1210.0.1.0 [2025-09-24 06:12:16.100] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:12:17.667] SBL2:1210.0.1.0 [2025-09-24 06:12:17.715] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:12:17.811] j-A [2025-09-24 06:12:25.167] The R5 Autosar Classic is running [2025-09-24 06:12:25.190] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:12:25.190] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:12:25.798] INIT: version 2.96 booting [2025-09-24 06:12:25.910] INIT: Entering runlevel: 5 [2025-09-24 06:12:26.054] mtd28 attached [2025-09-24 06:12:26.070] mtd24 attached [2025-09-24 06:12:26.101] mtd32 attached [2025-09-24 06:12:26.117] ubi0:animations is mounted. [2025-09-24 06:12:26.117] ubi1:textures is mounted. [2025-09-24 06:12:26.133] RTNETLINK answers: File exists [2025-09-24 06:12:26.149] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:12:26.149] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:12:26.176] ubi2:dml_code is mounted. [2025-09-24 06:12:26.176] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:12:26.176] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:12:26.176] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:12:26.176] data.LB_FadeInType0=100 [2025-09-24 06:12:26.197] data.CHLH_FadeInType0=0 [2025-09-24 06:12:26.197] data.WU_FadeInDelay=0 [2025-09-24 06:12:26.197] max_time_out=0 [2025-09-24 06:12:26.197] No splash screen [2025-09-24 06:12:26.197] stop dss Done [2025-09-24 06:12:26.229] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:12:26.246] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:12:26.279] /dev/mem opened. [2025-09-24 06:12:26.279] Memory mapped at address 0xffffb33d9000. [2025-09-24 06:12:26.279] Read at address 0x00600018 (0xffffb33d9018): 0x00000000 [2025-09-24 06:12:26.279] Write at address 0x00600018 (0xffffb33d9018): 0x00400040, readback 0x00400040 [2025-09-24 06:12:26.424] Loaded PowerVR consumer services. [2025-09-24 06:12:26.535] Waiting data available... [2025-09-24 06:12:26.551] 512+0 records in [2025-09-24 06:12:26.551] 512+0 records out [2025-09-24 06:12:26.567] Starting syslogd/klogd: done [2025-09-24 06:12:26.599] DML Start [2025-09-24 06:12:26.743] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:12:27.015] DML res1: 0 [2025-09-24 06:12:27.425] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:12:27.425] Read Success [2025-09-24 06:12:27.425] Verifying certificate... [2025-09-24 06:12:27.649] Verified OK [2025-09-24 06:12:27.681] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:12:29.280] Verified OK [2025-09-24 06:12:29.280] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:12:29.849] Verified OK [2025-09-24 06:12:29.849] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:12:32.647] fs.protected_hardlinks = 1 [2025-09-24 06:12:32.647] fs.protected_symlinks = 1 [2025-09-24 06:12:32.647] kernel.modules_disabled = 1 [2025-09-24 06:12:32.838] [2025-09-24 06:12:32.838] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:12:34.054] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:12:41.845] SBL1:1210.0.1.0 [2025-09-24 06:12:41.877] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:12:43.459] SBL2:1210.0.1.0 [2025-09-24 06:12:43.492] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:12:43.603] j-A [2025-09-24 06:12:50.976] The R5 Autosar Classic is running [2025-09-24 06:12:50.976] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:12:50.976] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:12:51.583] INIT: version 2.96 booting [2025-09-24 06:12:51.695] INIT: Entering runlevel: 5 [2025-09-24 06:12:51.855] mtd28 attached [2025-09-24 06:12:51.871] mtd32 attached [2025-09-24 06:12:51.871] mtd24 attached [2025-09-24 06:12:51.902] ubi0:animations is mounted. [2025-09-24 06:12:51.918] RTNETLINK answers: File exists [2025-09-24 06:12:51.968] ubi2:textures is mounted. [2025-09-24 06:12:51.968] ubi1:dml_code is mounted. [2025-09-24 06:12:51.968] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:12:51.968] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:12:51.968] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:12:51.968] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:12:51.968] data.LB_FadeInType0=100 [2025-09-24 06:12:51.968] data.CHLH_FadeInType0=0 [2025-09-24 06:12:51.968] data.WU_FadeInDelay=0 [2025-09-24 06:12:51.968] max_time_out=0 [2025-09-24 06:12:51.968] No splash screen [2025-09-24 06:12:51.968] stop dss Done [2025-09-24 06:12:51.968] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:12:52.039] /dev/mem opened. [2025-09-24 06:12:52.039] Memory mapped at address 0xffff8064a000. [2025-09-24 06:12:52.039] Read at address 0x00600018 (0xffff8064a018): 0x00000000 [2025-09-24 06:12:52.039] Write at address 0x00600018 (0xffff8064a018): 0x00400040, readback 0x00400040 [2025-09-24 06:12:52.039] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:12:52.055] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:12:52.183] Loaded PowerVR consumer services. [2025-09-24 06:12:52.326] Waiting data available... [2025-09-24 06:12:52.342] 512+0 records in [2025-09-24 06:12:52.342] 512+0 records out [2025-09-24 06:12:52.390] Starting syslogd/klogd: done [2025-09-24 06:12:52.406] DML Start [2025-09-24 06:12:52.599] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:12:52.806] DML res1: 0 [2025-09-24 06:12:53.235] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:12:53.235] Read Success [2025-09-24 06:12:53.235] Verifying certificate... [2025-09-24 06:12:53.491] Verified OK [2025-09-24 06:12:53.507] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:12:55.242] Verified OK [2025-09-24 06:12:55.242] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:12:55.801] Verified OK [2025-09-24 06:12:55.801] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:12:58.327] fs.protected_hardlinks = 1 [2025-09-24 06:12:58.327] fs.protected_symlinks = 1 [2025-09-24 06:12:58.343] kernel.modules_disabled = 1 [2025-09-24 06:12:58.519] [2025-09-24 06:12:58.519] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:12:59.900] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:13:07.649] SBL1:1210.0.1.0 [2025-09-24 06:13:07.697] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:13:09.265] SBL2:1210.0.1.0 [2025-09-24 06:13:09.313] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:13:09.409] j-A [2025-09-24 06:13:16.764] The R5 Autosar Classic is running [2025-09-24 06:13:16.785] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:13:16.785] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:13:17.393] INIT: version 2.96 booting [2025-09-24 06:13:17.505] INIT: Entering runlevel: 5 [2025-09-24 06:13:17.665] mtd24 attached [2025-09-24 06:13:17.665] mtd28 attached [2025-09-24 06:13:17.681] mtd32 attached [2025-09-24 06:13:17.729] ubi0:textures is mounted. [2025-09-24 06:13:17.762] RTNETLINK answers: File exists [2025-09-24 06:13:17.762] ubi2:dml_code is mounted. [2025-09-24 06:13:17.762] ubi1:animations is mounted. [2025-09-24 06:13:17.762] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:13:17.762] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:13:17.795] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:13:17.795] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:13:17.795] data.LB_FadeInType0=100 [2025-09-24 06:13:17.795] data.CHLH_FadeInType0=0 [2025-09-24 06:13:17.795] data.WU_FadeInDelay=0 [2025-09-24 06:13:17.795] max_time_out=0 [2025-09-24 06:13:17.795] No splash screen [2025-09-24 06:13:17.795] stop dss Done [2025-09-24 06:13:17.795] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:13:17.865] /dev/mem opened. [2025-09-24 06:13:17.865] Memory mapped at address 0xffff814ce000. [2025-09-24 06:13:17.865] Read at address 0x00600018 (0xffff814ce018): 0x00000000 [2025-09-24 06:13:17.865] Write at address 0x00600018 (0xffff814ce018): 0x00400040, readback 0x00400040 [2025-09-24 06:13:17.865] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:13:17.865] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:13:17.962] Loaded PowerVR consumer services. [2025-09-24 06:13:18.138] Waiting data available... [2025-09-24 06:13:18.154] 512+0 records in [2025-09-24 06:13:18.154] 512+0 records out [2025-09-24 06:13:18.169] Starting syslogd/klogd: done [2025-09-24 06:13:18.201] DML Start [2025-09-24 06:13:18.394] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:13:18.634] DML res1: 0 [2025-09-24 06:13:18.970] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:13:18.986] Read Success [2025-09-24 06:13:18.986] Verifying certificate... [2025-09-24 06:13:19.226] Verified OK [2025-09-24 06:13:19.242] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:13:20.917] Verified OK [2025-09-24 06:13:20.917] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:13:21.540] Verified OK [2025-09-24 06:13:21.561] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:13:24.215] fs.protected_hardlinks = 1 [2025-09-24 06:13:24.215] fs.protected_symlinks = 1 [2025-09-24 06:13:24.231] kernel.modules_disabled = 1 [2025-09-24 06:13:24.423] [2025-09-24 06:13:24.423] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:13:25.677] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:13:33.469] SBL1:1210.0.1.0 [2025-09-24 06:13:33.501] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:13:35.084] SBL2:1210.0.1.0 [2025-09-24 06:13:35.132] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:13:35.228] j-A [2025-09-24 06:13:42.584] The R5 Autosar Classic is running [2025-09-24 06:13:42.584] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:13:42.605] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:13:43.212] INIT: version 2.96 booting [2025-09-24 06:13:43.324] INIT: Entering runlevel: 5 [2025-09-24 06:13:43.485] mtd28 attached [2025-09-24 06:13:43.485] mtd24 attached [2025-09-24 06:13:43.500] mtd32 attached [2025-09-24 06:13:43.548] ubi1:textures is mounted. [2025-09-24 06:13:43.548] RTNETLINK answers: File exists [2025-09-24 06:13:43.614] ubi0:animations is mounted. [2025-09-24 06:13:43.614] ubi2:dml_code is mounted. [2025-09-24 06:13:43.614] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:13:43.614] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:13:43.614] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:13:43.614] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:13:43.614] data.LB_FadeInType0=100 [2025-09-24 06:13:43.614] data.CHLH_FadeInType0=0 [2025-09-24 06:13:43.614] data.WU_FadeInDelay=0 [2025-09-24 06:13:43.614] max_time_out=0 [2025-09-24 06:13:43.614] No splash screen [2025-09-24 06:13:43.614] stop dss Done [2025-09-24 06:13:43.614] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:13:43.703] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:13:43.703] /dev/mem opened. [2025-09-24 06:13:43.703] Memory mapped at address 0xffffa184f000. [2025-09-24 06:13:43.703] Read at address 0x00600018 (0xffffa184f018): 0x00000000 [2025-09-24 06:13:43.703] Write at address 0x00600018 (0xffffa184f018): 0x00400040, readback 0x00400040 [2025-09-24 06:13:43.703] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:13:43.783] Loaded PowerVR consumer services. [2025-09-24 06:13:43.943] Waiting data available... [2025-09-24 06:13:43.959] 512+0 records in [2025-09-24 06:13:43.959] 512+0 records out [2025-09-24 06:13:43.975] Starting syslogd/klogd: done [2025-09-24 06:13:44.007] DML Start [2025-09-24 06:13:44.167] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:13:44.407] DML res1: 0 [2025-09-24 06:13:44.839] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:13:44.855] Read Success [2025-09-24 06:13:44.855] Verifying certificate... [2025-09-24 06:13:45.094] Verified OK [2025-09-24 06:13:45.094] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:13:46.721] Verified OK [2025-09-24 06:13:46.721] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:13:47.329] Verified OK [2025-09-24 06:13:47.329] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:13:50.128] fs.protected_hardlinks = 1 [2025-09-24 06:13:50.128] fs.protected_symlinks = 1 [2025-09-24 06:13:50.144] kernel.modules_disabled = 1 [2025-09-24 06:13:50.319] [2025-09-24 06:13:50.319] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:13:51.517] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:13:59.247] SBL1:1210.0.1.0 [2025-09-24 06:13:59.295] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:14:00.878] SBL2:1210.0.1.0 [2025-09-24 06:14:00.910] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:14:01.022] j-A [2025-09-24 06:14:08.393] The R5 Autosar Classic is running [2025-09-24 06:14:08.393] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:14:08.393] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:14:09.001] INIT: version 2.96 booting [2025-09-24 06:14:09.113] INIT: Entering runlevel: 5 [2025-09-24 06:14:09.273] mtd24 attached [2025-09-24 06:14:09.273] mtd32 attached [2025-09-24 06:14:09.289] mtd28 attached [2025-09-24 06:14:09.391] ubi0:textures is mounted. [2025-09-24 06:14:09.391] RTNETLINK answers: File exists [2025-09-24 06:14:09.391] ubi1:dml_code is mounted. [2025-09-24 06:14:09.391] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:14:09.391] ubi2:animations is mounted. [2025-09-24 06:14:09.391] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:14:09.391] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:14:09.391] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:14:09.391] data.LB_FadeInType0=100 [2025-09-24 06:14:09.391] data.CHLH_FadeInType0=0 [2025-09-24 06:14:09.391] data.WU_FadeInDelay=0 [2025-09-24 06:14:09.391] max_time_out=0 [2025-09-24 06:14:09.391] No splash screen [2025-09-24 06:14:09.391] stop dss Done [2025-09-24 06:14:09.391] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:14:09.460] /dev/mem opened. [2025-09-24 06:14:09.460] Memory mapped at address 0xffff920c4000. [2025-09-24 06:14:09.460] Read at address 0x00600018 (0xffff920c4018): 0x00000000 [2025-09-24 06:14:09.460] Write at address 0x00600018 (0xffff920c4018): 0x00400040, readback 0x00400040 [2025-09-24 06:14:09.460] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:14:09.476] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:14:09.651] Loaded PowerVR consumer services. [2025-09-24 06:14:09.748] Waiting data available... [2025-09-24 06:14:09.780] 512+0 records in [2025-09-24 06:14:09.780] 512+0 records out [2025-09-24 06:14:09.796] Starting syslogd/klogd: done [2025-09-24 06:14:09.812] DML Start [2025-09-24 06:14:10.003] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:14:10.228] DML res1: 0 [2025-09-24 06:14:10.664] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:14:10.664] Read Success [2025-09-24 06:14:10.664] Verifying certificate... [2025-09-24 06:14:10.952] Verified OK [2025-09-24 06:14:10.968] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:14:12.376] Verified OK [2025-09-24 06:14:12.376] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:14:12.979] Verified OK [2025-09-24 06:14:12.979] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:14:15.713] fs.protected_hardlinks = 1 [2025-09-24 06:14:15.713] fs.protected_symlinks = 1 [2025-09-24 06:14:15.729] kernel.modules_disabled = 1 [2025-09-24 06:14:15.921] [2025-09-24 06:14:15.921] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:14:17.237] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:14:25.056] SBL1:1210.0.1.0 [2025-09-24 06:14:25.088] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:14:26.671] SBL2:1210.0.1.0 [2025-09-24 06:14:26.703] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:14:26.815] j-A [2025-09-24 06:14:34.188] The R5 Autosar Classic is running [2025-09-24 06:14:34.188] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:14:34.188] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:14:34.795] INIT: version 2.96 booting [2025-09-24 06:14:34.907] INIT: Entering runlevel: 5 [2025-09-24 06:14:35.051] mtd28 attached [2025-09-24 06:14:35.066] mtd24 attached [2025-09-24 06:14:35.082] mtd32 attached [2025-09-24 06:14:35.130] RTNETLINK answers: File exists [2025-09-24 06:14:35.130] ubi0:animations is mounted. [2025-09-24 06:14:35.194] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:14:35.194] ubi2:dml_code is mounted. [2025-09-24 06:14:35.194] ubi1:textures is mounted. [2025-09-24 06:14:35.194] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:14:35.194] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:14:35.194] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:14:35.194] data.LB_FadeInType0=100 [2025-09-24 06:14:35.194] data.CHLH_FadeInType0=0 [2025-09-24 06:14:35.194] data.WU_FadeInDelay=0 [2025-09-24 06:14:35.194] max_time_out=0 [2025-09-24 06:14:35.194] No splash screen [2025-09-24 06:14:35.194] stop dss Done [2025-09-24 06:14:35.194] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:14:35.258] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:14:35.258] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:14:35.258] /dev/mem opened. [2025-09-24 06:14:35.258] Memory mapped at address 0xffff84b4f000. [2025-09-24 06:14:35.258] Read at address 0x00600018 (0xffff84b4f018): 0x00000000 [2025-09-24 06:14:35.258] Write at address 0x00600018 (0xffff84b4f018): 0x00400040, readback 0x00400040 [2025-09-24 06:14:35.467] Loaded PowerVR consumer services. [2025-09-24 06:14:35.530] Waiting data available... [2025-09-24 06:14:35.562] 512+0 records in [2025-09-24 06:14:35.562] 512+0 records out [2025-09-24 06:14:35.594] Starting syslogd/klogd: done [2025-09-24 06:14:35.610] DML Start [2025-09-24 06:14:35.787] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:14:36.026] DML res1: 0 [2025-09-24 06:14:36.410] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:14:36.433] Read Success [2025-09-24 06:14:36.433] Verifying certificate... [2025-09-24 06:14:36.721] Verified OK [2025-09-24 06:14:36.737] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:14:38.444] Verified OK [2025-09-24 06:14:38.444] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:14:39.019] Verified OK [2025-09-24 06:14:39.019] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:14:41.610] fs.protected_hardlinks = 1 [2025-09-24 06:14:41.610] fs.protected_symlinks = 1 [2025-09-24 06:14:41.626] kernel.modules_disabled = 1 [2025-09-24 06:14:41.818] [2025-09-24 06:14:41.818] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:14:43.097] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:14:50.856] SBL1:1210.0.1.0 [2025-09-24 06:14:50.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:14:52.472] SBL2:1210.0.1.0 [2025-09-24 06:14:52.519] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:14:52.615] j-A [2025-09-24 06:14:59.969] The R5 Autosar Classic is running [2025-09-24 06:14:59.992] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:14:59.992] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:15:00.600] INIT: version 2.96 booting [2025-09-24 06:15:00.712] INIT: Entering runlevel: 5 [2025-09-24 06:15:00.872] mtd24 attached [2025-09-24 06:15:00.888] mtd32 attached [2025-09-24 06:15:00.888] mtd28 attached [2025-09-24 06:15:00.936] ubi0:textures is mounted. [2025-09-24 06:15:00.936] RTNETLINK answers: File exists [2025-09-24 06:15:00.978] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:15:00.978] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:15:00.978] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:15:00.978] ubi1:dml_code is mounted. [2025-09-24 06:15:00.978] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:15:00.978] ubi2:animations is mounted. [2025-09-24 06:15:00.978] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:15:01.006] data.LB_FadeInType0=100 [2025-09-24 06:15:01.006] data.CHLH_FadeInType0=0 [2025-09-24 06:15:01.006] data.WU_FadeInDelay=0 [2025-09-24 06:15:01.006] max_time_out=0 [2025-09-24 06:15:01.006] No splash screen [2025-09-24 06:15:01.006] stop dss Done [2025-09-24 06:15:01.023] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:15:01.039] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:15:01.054] /dev/mem opened. [2025-09-24 06:15:01.054] Memory mapped at address 0xffffb4ffb000. [2025-09-24 06:15:01.080] Read at address 0x00600018 (0xffffb4ffb018): 0x00000000 [2025-09-24 06:15:01.080] Write at address 0x00600018 (0xffffb4ffb018): 0x00400040, readback 0x00400040 [2025-09-24 06:15:01.208] Loaded PowerVR consumer services. [2025-09-24 06:15:01.364] Waiting data available... [2025-09-24 06:15:01.364] 512+0 records in [2025-09-24 06:15:01.364] 512+0 records out [2025-09-24 06:15:01.396] Starting syslogd/klogd: done [2025-09-24 06:15:01.412] DML Start [2025-09-24 06:15:01.571] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:15:01.811] DML res1: 0 [2025-09-24 06:15:02.260] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:15:02.276] Read Success [2025-09-24 06:15:02.276] Verifying certificate... [2025-09-24 06:15:02.532] Verified OK [2025-09-24 06:15:02.563] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:15:04.323] Verified OK [2025-09-24 06:15:04.323] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:15:04.846] Verified OK [2025-09-24 06:15:04.846] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:15:07.228] fs.protected_hardlinks = 1 [2025-09-24 06:15:07.228] fs.protected_symlinks = 1 [2025-09-24 06:15:07.244] kernel.modules_disabled = 1 [2025-09-24 06:15:07.436] [2025-09-24 06:15:07.436] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:15:08.837] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:15:16.658] SBL1:1210.0.1.0 [2025-09-24 06:15:16.706] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:15:18.272] SBL2:1210.0.1.0 [2025-09-24 06:15:18.321] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:15:18.416] j-A [2025-09-24 06:15:25.771] The R5 Autosar Classic is running [2025-09-24 06:15:25.794] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:15:25.794] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:15:26.401] INIT: version 2.96 booting [2025-09-24 06:15:26.513] INIT: Entering runlevel: 5 [2025-09-24 06:15:26.673] mtd24 attached [2025-09-24 06:15:26.689] mtd28 attached [2025-09-24 06:15:26.721] mtd32 attached [2025-09-24 06:15:26.721] ubi0:textures is mounted. [2025-09-24 06:15:26.737] ubi1:animations is mounted. [2025-09-24 06:15:26.785] RTNETLINK answers: File exists [2025-09-24 06:15:26.785] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:15:26.785] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:15:26.785] ubi2:dml_code is mounted. [2025-09-24 06:15:26.785] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:15:26.785] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:15:26.785] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:15:26.785] data.LB_FadeInType0=100 [2025-09-24 06:15:26.785] data.CHLH_FadeInType0=0 [2025-09-24 06:15:26.806] data.WU_FadeInDelay=0 [2025-09-24 06:15:26.806] max_time_out=0 [2025-09-24 06:15:26.806] No splash screen [2025-09-24 06:15:26.806] stop dss Done [2025-09-24 06:15:26.879] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:15:26.879] /dev/mem opened. [2025-09-24 06:15:26.879] Memory mapped at address 0xffff9b1c9000. [2025-09-24 06:15:26.879] Read at address 0x00600018 (0xffff9b1c9018): 0x00000000 [2025-09-24 06:15:26.879] Write at address 0x00600018 (0xffff9b1c9018): 0x00400040, readback 0x00400040 [2025-09-24 06:15:26.879] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:15:27.055] Loaded PowerVR consumer services. [2025-09-24 06:15:27.135] Waiting data available... [2025-09-24 06:15:27.167] 512+0 records in [2025-09-24 06:15:27.167] 512+0 records out [2025-09-24 06:15:27.215] Starting syslogd/klogd: done [2025-09-24 06:15:27.232] DML Start [2025-09-24 06:15:27.391] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:15:27.599] DML res1: 0 [2025-09-24 06:15:28.060] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:15:28.060] Read Success [2025-09-24 06:15:28.060] Verifying certificate... [2025-09-24 06:15:28.316] Verified OK [2025-09-24 06:15:28.331] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:15:29.883] Verified OK [2025-09-24 06:15:29.883] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:15:30.517] Verified OK [2025-09-24 06:15:30.517] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:15:33.124] fs.protected_hardlinks = 1 [2025-09-24 06:15:33.139] fs.protected_symlinks = 1 [2025-09-24 06:15:33.139] kernel.modules_disabled = 1 [2025-09-24 06:15:33.346] [2025-09-24 06:15:33.346] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:15:34.687] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:15:42.460] SBL1:1210.0.1.0 [2025-09-24 06:15:42.492] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:15:44.075] SBL2:1210.0.1.0 [2025-09-24 06:15:44.107] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:15:44.219] j-A [2025-09-24 06:15:51.593] The R5 Autosar Classic is running [2025-09-24 06:15:51.593] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:15:51.593] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:15:52.201] INIT: version 2.96 booting [2025-09-24 06:15:52.312] INIT: Entering runlevel: 5 [2025-09-24 06:15:52.456] mtd24 attached [2025-09-24 06:15:52.472] mtd28 attached [2025-09-24 06:15:52.504] ubi0:textures is mounted. [2025-09-24 06:15:52.520] ubi1:animations is mounted. [2025-09-24 06:15:52.520] mtd32 attached [2025-09-24 06:15:52.536] RTNETLINK answers: File exists [2025-09-24 06:15:52.580] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:15:52.580] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:15:52.580] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:15:52.580] ubi2:dml_code is mounted. [2025-09-24 06:15:52.580] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:15:52.580] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:15:52.611] data.LB_FadeInType0=100 [2025-09-24 06:15:52.611] data.CHLH_FadeInType0=0 [2025-09-24 06:15:52.611] data.WU_FadeInDelay=0 [2025-09-24 06:15:52.611] max_time_out=0 [2025-09-24 06:15:52.611] No splash screen [2025-09-24 06:15:52.611] stop dss Done [2025-09-24 06:15:52.627] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:15:52.627] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:15:52.692] /dev/mem opened. [2025-09-24 06:15:52.692] Memory mapped at address 0xffff96916000. [2025-09-24 06:15:52.692] Read at address 0x00600018 (0xffff96916018): 0x00000000 [2025-09-24 06:15:52.692] Write at address 0x00600018 (0xffff96916018): 0x00400040, readback 0x00400040 [2025-09-24 06:15:52.788] Loaded PowerVR consumer services. [2025-09-24 06:15:52.931] Waiting data available... [2025-09-24 06:15:52.964] 512+0 records in [2025-09-24 06:15:52.964] 512+0 records out [2025-09-24 06:15:52.996] Starting syslogd/klogd: done [2025-09-24 06:15:53.012] DML Start [2025-09-24 06:15:53.187] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:15:53.427] DML res1: 0 [2025-09-24 06:15:53.884] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:15:53.884] Read Success [2025-09-24 06:15:53.884] Verifying certificate... [2025-09-24 06:15:54.107] Verified OK [2025-09-24 06:15:54.123] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:15:55.754] Verified OK [2025-09-24 06:15:55.754] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:15:56.362] Verified OK [2025-09-24 06:15:56.362] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:15:59.064] fs.protected_hardlinks = 1 [2025-09-24 06:15:59.064] fs.protected_symlinks = 1 [2025-09-24 06:15:59.080] kernel.modules_disabled = 1 [2025-09-24 06:15:59.287] [2025-09-24 06:15:59.287] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:16:00.452] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:16:08.264] SBL1:1210.0.1.0 [2025-09-24 06:16:08.311] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:16:09.878] SBL2:1210.0.1.0 [2025-09-24 06:16:09.926] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:16:10.039] j-A [2025-09-24 06:16:17.377] The R5 Autosar Classic is running [2025-09-24 06:16:17.402] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:16:17.402] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:16:18.010] INIT: version 2.96 booting [2025-09-24 06:16:18.122] INIT: Entering runlevel: 5 [2025-09-24 06:16:18.282] mtd28 attached [2025-09-24 06:16:18.282] mtd24 attached [2025-09-24 06:16:18.298] mtd32 attached [2025-09-24 06:16:18.346] RTNETLINK answers: File exists [2025-09-24 06:16:18.346] ubi1:textures is mounted. [2025-09-24 06:16:18.409] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:16:18.409] ubi0:animations is mounted. [2025-09-24 06:16:18.409] ubi2:dml_code is mounted. [2025-09-24 06:16:18.409] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:16:18.409] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:16:18.409] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:16:18.409] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:16:18.409] data.LB_FadeInType0=100 [2025-09-24 06:16:18.409] data.CHLH_FadeInType0=0 [2025-09-24 06:16:18.409] data.WU_FadeInDelay=0 [2025-09-24 06:16:18.409] max_time_out=0 [2025-09-24 06:16:18.409] No splash screen [2025-09-24 06:16:18.409] stop dss Done [2025-09-24 06:16:18.441] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:16:18.482] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:16:18.482] /dev/mem opened. [2025-09-24 06:16:18.482] Memory mapped at address 0xffffa6c77000. [2025-09-24 06:16:18.482] Read at address 0x00600018 (0xffffa6c77018): 0x00000000 [2025-09-24 06:16:18.482] Write at address 0x00600018 (0xffffa6c77018): 0x00400040, readback 0x00400040 [2025-09-24 06:16:18.737] Loaded PowerVR consumer services. [2025-09-24 06:16:18.786] Waiting data available... [2025-09-24 06:16:18.802] 512+0 records in [2025-09-24 06:16:18.802] 512+0 records out [2025-09-24 06:16:18.833] Starting syslogd/klogd: done [2025-09-24 06:16:18.849] DML Start [2025-09-24 06:16:19.073] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:16:19.281] DML res1: 0 [2025-09-24 06:16:19.664] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:16:19.680] Read Success [2025-09-24 06:16:19.680] Verifying certificate... [2025-09-24 06:16:19.904] Verified OK [2025-09-24 06:16:19.920] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:16:21.534] Verified OK [2025-09-24 06:16:21.534] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:16:22.189] Verified OK [2025-09-24 06:16:22.189] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:16:24.811] fs.protected_hardlinks = 1 [2025-09-24 06:16:24.826] fs.protected_symlinks = 1 [2025-09-24 06:16:24.826] kernel.modules_disabled = 1 [2025-09-24 06:16:25.018] [2025-09-24 06:16:25.018] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:16:26.362] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:16:34.071] SBL1:1210.0.1.0 [2025-09-24 06:16:34.119] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:16:35.686] SBL2:1210.0.1.0 [2025-09-24 06:16:35.734] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:16:35.830] j-A [2025-09-24 06:16:43.186] The R5 Autosar Classic is running [2025-09-24 06:16:43.210] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:16:43.210] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:16:43.818] INIT: version 2.96 booting [2025-09-24 06:16:43.929] INIT: Entering runlevel: 5 [2025-09-24 06:16:44.089] mtd32 attached [2025-09-24 06:16:44.089] mtd28 attached [2025-09-24 06:16:44.105] mtd24 attached [2025-09-24 06:16:44.154] RTNETLINK answers: File exists [2025-09-24 06:16:44.223] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:16:44.223] ubi1:animations is mounted. [2025-09-24 06:16:44.223] ubi2:textures is mounted. [2025-09-24 06:16:44.223] ubi0:dml_code is mounted. [2025-09-24 06:16:44.223] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:16:44.223] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:16:44.223] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:16:44.223] data.LB_FadeInType0=100 [2025-09-24 06:16:44.223] data.CHLH_FadeInType0=0 [2025-09-24 06:16:44.223] data.WU_FadeInDelay=0 [2025-09-24 06:16:44.223] max_time_out=0 [2025-09-24 06:16:44.223] No splash screen [2025-09-24 06:16:44.223] stop dss Done [2025-09-24 06:16:44.223] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:16:44.256] /dev/mem opened. [2025-09-24 06:16:44.288] Memory mapped at address 0xffff9e5f1000. [2025-09-24 06:16:44.288] Read at address 0x00600018 (0xffff9e5f1018): 0x00000000 [2025-09-24 06:16:44.288] Write at address 0x00600018 (0xffff9e5f1018): 0x00400040, readback 0x00400040 [2025-09-24 06:16:44.319] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:16:44.319] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:16:44.512] Loaded PowerVR consumer services. [2025-09-24 06:16:44.575] Waiting data available... [2025-09-24 06:16:44.591] 512+0 records in [2025-09-24 06:16:44.591] 512+0 records out [2025-09-24 06:16:44.623] Starting syslogd/klogd: done [2025-09-24 06:16:44.639] DML Start [2025-09-24 06:16:44.814] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:16:45.039] DML res1: 0 [2025-09-24 06:16:45.452] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:16:45.452] Read Success [2025-09-24 06:16:45.452] Verifying certificate... [2025-09-24 06:16:45.692] Verified OK [2025-09-24 06:16:45.724] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:16:47.306] Verified OK [2025-09-24 06:16:47.306] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:16:47.946] Verified OK [2025-09-24 06:16:47.946] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:16:50.647] fs.protected_hardlinks = 1 [2025-09-24 06:16:50.647] fs.protected_symlinks = 1 [2025-09-24 06:16:50.663] kernel.modules_disabled = 1 [2025-09-24 06:16:50.855] [2025-09-24 06:16:50.855] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:16:52.132] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:16:59.887] SBL1:1210.0.1.0 [2025-09-24 06:16:59.919] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:17:01.502] SBL2:1210.0.1.0 [2025-09-24 06:17:01.534] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:17:01.646] j-A [2025-09-24 06:17:09.021] The R5 Autosar Classic is running [2025-09-24 06:17:09.021] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:17:09.021] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:17:09.629] INIT: version 2.96 booting [2025-09-24 06:17:09.741] INIT: Entering runlevel: 5 [2025-09-24 06:17:09.901] mtd28 attached [2025-09-24 06:17:09.901] mtd32 attached [2025-09-24 06:17:09.917] mtd24 attached [2025-09-24 06:17:09.949] ubi0:animations is mounted. [2025-09-24 06:17:09.965] RTNETLINK answers: File exists [2025-09-24 06:17:10.031] ubi1:dml_code is mounted. [2025-09-24 06:17:10.031] ubi2:textures is mounted. [2025-09-24 06:17:10.031] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:17:10.031] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:17:10.031] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:17:10.031] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:17:10.031] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:17:10.031] data.LB_FadeInType0=100 [2025-09-24 06:17:10.031] data.CHLH_FadeInType0=0 [2025-09-24 06:17:10.031] data.WU_FadeInDelay=0 [2025-09-24 06:17:10.031] max_time_out=0 [2025-09-24 06:17:10.031] No splash screen [2025-09-24 06:17:10.031] stop dss Done [2025-09-24 06:17:10.078] /dev/mem opened. [2025-09-24 06:17:10.111] Memory mapped at address 0xffffa4e98000. [2025-09-24 06:17:10.111] Read at address 0x00600018 (0xffffa4e98018): 0x00000000 [2025-09-24 06:17:10.111] Write at address 0x00600018 (0xffffa4e98018): 0x00400040, readback 0x00400040 [2025-09-24 06:17:10.111] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:17:10.127] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:17:10.254] Loaded PowerVR consumer services. [2025-09-24 06:17:10.367] Waiting data available... [2025-09-24 06:17:10.383] 512+0 records in [2025-09-24 06:17:10.399] 512+0 records out [2025-09-24 06:17:10.414] Starting syslogd/klogd: done [2025-09-24 06:17:10.430] DML Start [2025-09-24 06:17:10.622] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:17:10.814] DML res1: 0 [2025-09-24 06:17:11.262] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:17:11.278] Read Success [2025-09-24 06:17:11.278] Verifying certificate... [2025-09-24 06:17:11.550] Verified OK [2025-09-24 06:17:11.566] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:17:13.245] Verified OK [2025-09-24 06:17:13.245] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:17:13.868] Verified OK [2025-09-24 06:17:13.868] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:17:16.458] fs.protected_hardlinks = 1 [2025-09-24 06:17:16.473] fs.protected_symlinks = 1 [2025-09-24 06:17:16.473] kernel.modules_disabled = 1 [2025-09-24 06:17:16.666] [2025-09-24 06:17:16.666] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:17:17.902] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:17:25.696] SBL1:1210.0.1.0 [2025-09-24 06:17:25.744] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:17:27.311] SBL2:1210.0.1.0 [2025-09-24 06:17:27.359] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:17:27.471] j-A [2025-09-24 06:17:34.811] The R5 Autosar Classic is running [2025-09-24 06:17:34.842] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:17:34.842] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:17:35.449] INIT: version 2.96 booting [2025-09-24 06:17:35.562] INIT: Entering runlevel: 5 [2025-09-24 06:17:35.705] mtd24 attached [2025-09-24 06:17:35.721] mtd32 attached [2025-09-24 06:17:35.737] mtd28 attached [2025-09-24 06:17:35.785] ubi0:textures is mounted. [2025-09-24 06:17:35.785] RTNETLINK answers: File exists [2025-09-24 06:17:35.850] ubi1:dml_code is mounted. [2025-09-24 06:17:35.850] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:17:35.850] ubi2:animations is mounted. [2025-09-24 06:17:35.850] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:17:35.850] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:17:35.850] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:17:35.850] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:17:35.850] data.LB_FadeInType0=100 [2025-09-24 06:17:35.850] data.CHLH_FadeInType0=0 [2025-09-24 06:17:35.850] data.WU_FadeInDelay=0 [2025-09-24 06:17:35.850] max_time_out=0 [2025-09-24 06:17:35.850] No splash screen [2025-09-24 06:17:35.850] stop dss Done [2025-09-24 06:17:35.934] /dev/mem opened. [2025-09-24 06:17:35.934] Memory mapped at address 0xffff91c07000. [2025-09-24 06:17:35.934] Read at address 0x00600018 (0xffff91c07018): 0x00000000 [2025-09-24 06:17:35.934] Write at address 0x00600018 (0xffff91c07018): 0x00400040, readback 0x00400040 [2025-09-24 06:17:35.934] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:17:35.934] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:17:36.030] Loaded PowerVR consumer services. [2025-09-24 06:17:36.191] Waiting data available... [2025-09-24 06:17:36.191] 512+0 records in [2025-09-24 06:17:36.207] 512+0 records out [2025-09-24 06:17:36.222] Starting syslogd/klogd: done [2025-09-24 06:17:36.238] DML Start [2025-09-24 06:17:36.398] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:17:36.638] DML res1: 0 [2025-09-24 06:17:37.030] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:17:37.030] Read Success [2025-09-24 06:17:37.030] Verifying certificate... [2025-09-24 06:17:37.334] Verified OK [2025-09-24 06:17:37.350] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:17:39.060] Verified OK [2025-09-24 06:17:39.060] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:17:39.665] Verified OK [2025-09-24 06:17:39.665] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:17:42.336] fs.protected_hardlinks = 1 [2025-09-24 06:17:42.336] fs.protected_symlinks = 1 [2025-09-24 06:17:42.352] kernel.modules_disabled = 1 [2025-09-24 06:17:42.559] [2025-09-24 06:17:42.559] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:17:43.695] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:17:51.486] SBL1:1210.0.1.0 [2025-09-24 06:17:51.534] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:17:53.101] SBL2:1210.0.1.0 [2025-09-24 06:17:53.149] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:17:53.261] j-A [2025-09-24 06:18:00.600] The R5 Autosar Classic is running [2025-09-24 06:18:00.631] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:18:00.631] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:18:01.238] INIT: version 2.96 booting [2025-09-24 06:18:01.350] INIT: Entering runlevel: 5 [2025-09-24 06:18:01.494] mtd24 attached [2025-09-24 06:18:01.510] mtd28 attached [2025-09-24 06:18:01.510] mtd32 attached [2025-09-24 06:18:01.574] RTNETLINK answers: File exists [2025-09-24 06:18:01.574] ubi0:textures is mounted. [2025-09-24 06:18:01.628] ubi1:animations is mounted. [2025-09-24 06:18:01.628] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:18:01.628] ubi2:dml_code is mounted. [2025-09-24 06:18:01.628] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:18:01.628] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:18:01.628] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:18:01.628] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:18:01.628] data.LB_FadeInType0=100 [2025-09-24 06:18:01.628] data.CHLH_FadeInType0=0 [2025-09-24 06:18:01.628] data.WU_FadeInDelay=0 [2025-09-24 06:18:01.628] max_time_out=0 [2025-09-24 06:18:01.628] No splash screen [2025-09-24 06:18:01.628] stop dss Done [2025-09-24 06:18:01.702] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:18:01.702] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:18:01.702] /dev/mem opened. [2025-09-24 06:18:01.702] Memory mapped at address 0xffffba043000. [2025-09-24 06:18:01.702] Read at address 0x00600018 (0xffffba043018): 0x00000000 [2025-09-24 06:18:01.702] Write at address 0x00600018 (0xffffba043018): 0x00400040, readback 0x00400040 [2025-09-24 06:18:01.926] Loaded PowerVR consumer services. [2025-09-24 06:18:01.958] Waiting data available... [2025-09-24 06:18:01.990] 512+0 records in [2025-09-24 06:18:01.990] 512+0 records out [2025-09-24 06:18:02.007] Starting syslogd/klogd: done [2025-09-24 06:18:02.023] DML Start [2025-09-24 06:18:02.167] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:18:02.375] DML res1: 0 [2025-09-24 06:18:02.861] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:18:02.861] Read Success [2025-09-24 06:18:02.861] Verifying certificate... [2025-09-24 06:18:03.069] Verified OK [2025-09-24 06:18:03.085] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:18:04.700] Verified OK [2025-09-24 06:18:04.700] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:18:05.297] Verified OK [2025-09-24 06:18:05.297] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:18:07.920] fs.protected_hardlinks = 1 [2025-09-24 06:18:07.936] fs.protected_symlinks = 1 [2025-09-24 06:18:07.952] kernel.modules_disabled = 1 [2025-09-24 06:18:08.143] [2025-09-24 06:18:08.160] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:18:09.454] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:18:17.267] SBL1:1210.0.1.0 [2025-09-24 06:18:17.315] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:18:18.882] SBL2:1210.0.1.0 [2025-09-24 06:18:18.930] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:18:19.043] j-A [2025-09-24 06:18:26.413] The R5 Autosar Classic is running [2025-09-24 06:18:26.413] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:18:26.413] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:18:27.021] INIT: version 2.96 booting [2025-09-24 06:18:27.133] INIT: Entering runlevel: 5 [2025-09-24 06:18:27.292] mtd28 attached [2025-09-24 06:18:27.292] mtd24 attached [2025-09-24 06:18:27.325] mtd32 attached [2025-09-24 06:18:27.341] ubi1:textures is mounted. [2025-09-24 06:18:27.357] ubi0:animations is mounted. [2025-09-24 06:18:27.416] RTNETLINK answers: File exists [2025-09-24 06:18:27.416] ubi2:dml_code is mounted. [2025-09-24 06:18:27.416] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:18:27.416] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:18:27.416] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:18:27.416] data.LB_FadeInType0=100 [2025-09-24 06:18:27.416] data.CHLH_FadeInType0=0 [2025-09-24 06:18:27.416] data.WU_FadeInDelay=0 [2025-09-24 06:18:27.416] max_time_out=0 [2025-09-24 06:18:27.416] No splash screen [2025-09-24 06:18:27.416] stop dss Done [2025-09-24 06:18:27.416] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:18:27.416] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:18:27.484] /dev/mem opened. [2025-09-24 06:18:27.484] Memory mapped at address 0xffffa5fff000. [2025-09-24 06:18:27.484] Read at address 0x00600018 (0xffffa5fff018): 0x00000000 [2025-09-24 06:18:27.484] Write at address 0x00600018 (0xffffa5fff018): 0x00400040, readback 0x00400040 [2025-09-24 06:18:27.500] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:18:27.516] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:18:27.611] Loaded PowerVR consumer services. [2025-09-24 06:18:27.756] Waiting data available... [2025-09-24 06:18:27.788] 512+0 records in [2025-09-24 06:18:27.788] 512+0 records out [2025-09-24 06:18:27.804] Starting syslogd/klogd: done [2025-09-24 06:18:27.820] DML Start [2025-09-24 06:18:27.995] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:18:28.219] DML res1: 0 [2025-09-24 06:18:28.683] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:18:28.704] Read Success [2025-09-24 06:18:28.704] Verifying certificate... [2025-09-24 06:18:28.928] Verified OK [2025-09-24 06:18:28.944] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:18:30.617] Verified OK [2025-09-24 06:18:30.617] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:18:31.224] Verified OK [2025-09-24 06:18:31.224] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:18:33.816] fs.protected_hardlinks = 1 [2025-09-24 06:18:33.832] fs.protected_symlinks = 1 [2025-09-24 06:18:33.832] kernel.modules_disabled = 1 [2025-09-24 06:18:34.040] [2025-09-24 06:18:34.040] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:18:35.318] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:18:43.072] SBL1:1210.0.1.0 [2025-09-24 06:18:43.119] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:18:44.686] SBL2:1210.0.1.0 [2025-09-24 06:18:44.734] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:18:44.846] j-A [2025-09-24 06:18:52.184] The R5 Autosar Classic is running [2025-09-24 06:18:52.215] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:18:52.215] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:18:52.824] INIT: version 2.96 booting [2025-09-24 06:18:52.935] INIT: Entering runlevel: 5 [2025-09-24 06:18:53.079] mtd28 attached [2025-09-24 06:18:53.095] mtd24 attached [2025-09-24 06:18:53.095] mtd32 attached [2025-09-24 06:18:53.143] ubi0:animations is mounted. [2025-09-24 06:18:53.218] ubi1:textures is mounted. [2025-09-24 06:18:53.218] RTNETLINK answers: File exists [2025-09-24 06:18:53.218] ubi2:dml_code is mounted. [2025-09-24 06:18:53.218] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:18:53.218] data.LB_FadeInType0=100 [2025-09-24 06:18:53.218] data.CHLH_FadeInType0=0 [2025-09-24 06:18:53.218] data.WU_FadeInDelay=0 [2025-09-24 06:18:53.218] max_time_out=0 [2025-09-24 06:18:53.218] No splash screen [2025-09-24 06:18:53.218] stop dss Done [2025-09-24 06:18:53.218] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:18:53.218] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:18:53.218] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:18:53.234] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:18:53.250] /dev/mem opened. [2025-09-24 06:18:53.250] Memory mapped at address 0xffff94100000. [2025-09-24 06:18:53.276] Read at address 0x00600018 (0xffff94100018): 0x00000000 [2025-09-24 06:18:53.276] Write at address 0x00600018 (0xffff94100018): 0x00400040, readback 0x00400040 [2025-09-24 06:18:53.324] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:18:53.349] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:18:53.525] Loaded PowerVR consumer services. [2025-09-24 06:18:53.589] Waiting data available... [2025-09-24 06:18:53.604] 512+0 records in [2025-09-24 06:18:53.620] 512+0 records out [2025-09-24 06:18:53.636] Starting syslogd/klogd: done [2025-09-24 06:18:53.652] DML Start [2025-09-24 06:18:53.845] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:18:54.084] DML res1: 0 [2025-09-24 06:18:54.531] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:18:54.531] Read Success [2025-09-24 06:18:54.531] Verifying certificate... [2025-09-24 06:18:54.754] Verified OK [2025-09-24 06:18:54.770] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:18:56.537] Verified OK [2025-09-24 06:18:56.537] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:18:57.047] Verified OK [2025-09-24 06:18:57.047] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:18:59.461] fs.protected_hardlinks = 1 [2025-09-24 06:18:59.461] fs.protected_symlinks = 1 [2025-09-24 06:18:59.477] kernel.modules_disabled = 1 [2025-09-24 06:18:59.653] [2025-09-24 06:18:59.653] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:19:01.056] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:19:08.862] SBL1:1210.0.1.0 [2025-09-24 06:19:08.910] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:19:10.477] SBL2:1210.0.1.0 [2025-09-24 06:19:10.525] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:19:10.621] j-A [2025-09-24 06:19:17.975] The R5 Autosar Classic is running [2025-09-24 06:19:17.999] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:19:17.999] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:19:18.606] INIT: version 2.96 booting [2025-09-24 06:19:18.719] INIT: Entering runlevel: 5 [2025-09-24 06:19:18.878] mtd24 attached [2025-09-24 06:19:18.878] mtd28 attached [2025-09-24 06:19:18.910] ubi0:textures is mounted. [2025-09-24 06:19:18.926] ubi1:animations is mounted. [2025-09-24 06:19:18.926] mtd32 attached [2025-09-24 06:19:18.958] RTNETLINK answers: File exists [2025-09-24 06:19:18.958] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:19:18.978] ubi2:dml_code is mounted. [2025-09-24 06:19:18.978] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:19:18.978] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:19:19.013] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:19:19.013] data.LB_FadeInType0=100 [2025-09-24 06:19:19.013] data.CHLH_FadeInType0=0 [2025-09-24 06:19:19.013] data.WU_FadeInDelay=0 [2025-09-24 06:19:19.013] max_time_out=0 [2025-09-24 06:19:19.013] No splash screen [2025-09-24 06:19:19.013] stop dss Done [2025-09-24 06:19:19.013] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:19:19.083] /dev/mem opened. [2025-09-24 06:19:19.083] Memory mapped at address 0xffff9234f000. [2025-09-24 06:19:19.083] Read at address 0x00600018 (0xffff9234f018): 0x00000000 [2025-09-24 06:19:19.083] Write at address 0x00600018 (0xffff9234f018): 0x00400040, readback 0x00400040 [2025-09-24 06:19:19.115] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:19:19.115] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:19:19.194] Loaded PowerVR consumer services. [2025-09-24 06:19:19.355] Waiting data available... [2025-09-24 06:19:19.371] 512+0 records in [2025-09-24 06:19:19.371] 512+0 records out [2025-09-24 06:19:19.402] Starting syslogd/klogd: done [2025-09-24 06:19:19.418] DML Start [2025-09-24 06:19:19.610] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:19:19.851] DML res1: 0 [2025-09-24 06:19:20.259] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:19:20.259] Read Success [2025-09-24 06:19:20.259] Verifying certificate... [2025-09-24 06:19:20.483] Verified OK [2025-09-24 06:19:20.499] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:19:22.208] Verified OK [2025-09-24 06:19:22.208] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:19:22.823] Verified OK [2025-09-24 06:19:22.823] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:19:25.461] fs.protected_hardlinks = 1 [2025-09-24 06:19:25.477] fs.protected_symlinks = 1 [2025-09-24 06:19:25.493] kernel.modules_disabled = 1 [2025-09-24 06:19:25.685] [2025-09-24 06:19:25.685] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:19:26.836] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:19:34.655] SBL1:1210.0.1.0 [2025-09-24 06:19:34.703] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:19:36.269] SBL2:1210.0.1.0 [2025-09-24 06:19:36.318] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:19:36.429] j-A [2025-09-24 06:19:43.800] The R5 Autosar Classic is running [2025-09-24 06:19:43.800] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:19:43.800] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:19:44.407] INIT: version 2.96 booting [2025-09-24 06:19:44.519] INIT: Entering runlevel: 5 [2025-09-24 06:19:44.679] mtd28 attached [2025-09-24 06:19:44.679] mtd32 attached [2025-09-24 06:19:44.695] mtd24 attached [2025-09-24 06:19:44.711] ubi0:animations is mounted. [2025-09-24 06:19:44.743] RTNETLINK answers: File exists [2025-09-24 06:19:44.743] ubi1:dml_code is mounted. [2025-09-24 06:19:44.804] ubi2:textures is mounted. [2025-09-24 06:19:44.804] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:19:44.804] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:19:44.804] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:19:44.804] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:19:44.804] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:19:44.804] data.LB_FadeInType0=100 [2025-09-24 06:19:44.804] data.CHLH_FadeInType0=0 [2025-09-24 06:19:44.804] data.WU_FadeInDelay=0 [2025-09-24 06:19:44.804] max_time_out=0 [2025-09-24 06:19:44.804] No splash screen [2025-09-24 06:19:44.804] stop dss Done [2025-09-24 06:19:44.843] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:19:44.843] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:19:44.880] /dev/mem opened. [2025-09-24 06:19:44.880] Memory mapped at address 0xffff925a3000. [2025-09-24 06:19:44.880] Read at address 0x00600018 (0xffff925a3018): 0x00000000 [2025-09-24 06:19:44.880] Write at address 0x00600018 (0xffff925a3018): 0x00400040, readback 0x00400040 [2025-09-24 06:19:44.960] Loaded PowerVR consumer services. [2025-09-24 06:19:45.136] Waiting data available... [2025-09-24 06:19:45.152] 512+0 records in [2025-09-24 06:19:45.152] 512+0 records out [2025-09-24 06:19:45.200] Starting syslogd/klogd: done [2025-09-24 06:19:45.216] DML Start [2025-09-24 06:19:45.376] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:19:45.600] DML res1: 0 [2025-09-24 06:19:46.048] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:19:46.068] Read Success [2025-09-24 06:19:46.068] Verifying certificate... [2025-09-24 06:19:46.308] Verified OK [2025-09-24 06:19:46.308] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:19:47.918] Verified OK [2025-09-24 06:19:47.918] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:19:48.519] Verified OK [2025-09-24 06:19:48.519] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:19:51.285] fs.protected_hardlinks = 1 [2025-09-24 06:19:51.285] fs.protected_symlinks = 1 [2025-09-24 06:19:51.301] kernel.modules_disabled = 1 [2025-09-24 06:19:51.509] [2025-09-24 06:19:51.509] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:19:52.622] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:20:00.456] SBL1:1210.0.1.0 [2025-09-24 06:20:00.504] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:20:02.087] SBL2:1210.0.1.0 [2025-09-24 06:20:02.119] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:20:02.231] j-A [2025-09-24 06:20:09.602] The R5 Autosar Classic is running [2025-09-24 06:20:09.602] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:20:09.602] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:20:10.210] INIT: version 2.96 booting [2025-09-24 06:20:10.321] INIT: Entering runlevel: 5 [2025-09-24 06:20:10.482] mtd28 attached [2025-09-24 06:20:10.498] mtd32 attached [2025-09-24 06:20:10.498] mtd24 attached [2025-09-24 06:20:10.545] RTNETLINK answers: File exists [2025-09-24 06:20:10.591] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:20:10.591] ubi1:dml_code is mounted. [2025-09-24 06:20:10.591] ubi0:animations is mounted. [2025-09-24 06:20:10.591] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:20:10.591] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:20:10.591] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:20:10.591] ubi2:textures is mounted. [2025-09-24 06:20:10.591] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:20:10.615] data.LB_FadeInType0=100 [2025-09-24 06:20:10.615] data.CHLH_FadeInType0=0 [2025-09-24 06:20:10.615] data.WU_FadeInDelay=0 [2025-09-24 06:20:10.615] max_time_out=0 [2025-09-24 06:20:10.615] No splash screen [2025-09-24 06:20:10.615] stop dss Done [2025-09-24 06:20:10.644] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:20:10.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:20:10.660] /dev/mem opened. [2025-09-24 06:20:10.660] Memory mapped at address 0xffff803cd000. [2025-09-24 06:20:10.686] Read at address 0x00600018 (0xffff803cd018): 0x00000000 [2025-09-24 06:20:10.686] Write at address 0x00600018 (0xffff803cd018): 0x00400040, readback 0x00400040 [2025-09-24 06:20:10.829] Loaded PowerVR consumer services. [2025-09-24 06:20:10.958] Waiting data available... [2025-09-24 06:20:10.974] 512+0 records in [2025-09-24 06:20:10.974] 512+0 records out [2025-09-24 06:20:11.005] Starting syslogd/klogd: done [2025-09-24 06:20:11.021] DML Start [2025-09-24 06:20:11.197] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:20:11.405] DML res1: 0 [2025-09-24 06:20:11.956] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:20:11.956] Read Success [2025-09-24 06:20:11.956] Verifying certificate... [2025-09-24 06:20:12.212] Verified OK [2025-09-24 06:20:12.244] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:20:13.936] Verified OK [2025-09-24 06:20:13.936] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:20:14.476] Verified OK [2025-09-24 06:20:14.476] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:20:16.938] fs.protected_hardlinks = 1 [2025-09-24 06:20:16.954] fs.protected_symlinks = 1 [2025-09-24 06:20:16.970] kernel.modules_disabled = 1 [2025-09-24 06:20:17.162] [2025-09-24 06:20:17.162] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:20:18.436] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:20:26.251] SBL1:1210.0.1.0 [2025-09-24 06:20:26.299] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:20:27.866] SBL2:1210.0.1.0 [2025-09-24 06:20:27.913] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:20:28.009] j-A [2025-09-24 06:20:35.365] The R5 Autosar Classic is running [2025-09-24 06:20:35.386] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:20:35.386] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:20:35.994] INIT: version 2.96 booting [2025-09-24 06:20:36.107] INIT: Entering runlevel: 5 [2025-09-24 06:20:36.250] mtd24 attached [2025-09-24 06:20:36.266] mtd28 attached [2025-09-24 06:20:36.282] mtd32 attached [2025-09-24 06:20:36.298] ubi0:textures is mounted. [2025-09-24 06:20:36.330] ubi1:animations is mounted. [2025-09-24 06:20:36.330] RTNETLINK answers: File exists [2025-09-24 06:20:36.384] ubi2:dml_code is mounted. [2025-09-24 06:20:36.384] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:20:36.384] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:20:36.384] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:20:36.384] data.LB_FadeInType0=100 [2025-09-24 06:20:36.384] data.CHLH_FadeInType0=0 [2025-09-24 06:20:36.384] data.WU_FadeInDelay=0 [2025-09-24 06:20:36.384] max_time_out=0 [2025-09-24 06:20:36.384] No splash screen [2025-09-24 06:20:36.384] stop dss Done [2025-09-24 06:20:36.384] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:20:36.384] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:20:36.449] /dev/mem opened. [2025-09-24 06:20:36.449] Memory mapped at address 0xffffad844000. [2025-09-24 06:20:36.449] Read at address 0x00600018 (0xffffad844018): 0x00000000 [2025-09-24 06:20:36.449] Write at address 0x00600018 (0xffffad844018): 0x00400040, readback 0x00400040 [2025-09-24 06:20:36.464] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:20:36.480] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:20:36.561] Loaded PowerVR consumer services. [2025-09-24 06:20:36.720] Waiting data available... [2025-09-24 06:20:36.736] 512+0 records in [2025-09-24 06:20:36.736] 512+0 records out [2025-09-24 06:20:36.768] Starting syslogd/klogd: done [2025-09-24 06:20:36.784] DML Start [2025-09-24 06:20:36.992] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:20:37.232] DML res1: 0 [2025-09-24 06:20:37.550] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:20:37.550] Read Success [2025-09-24 06:20:37.550] Verifying certificate... [2025-09-24 06:20:37.774] Verified OK [2025-09-24 06:20:37.790] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:20:39.277] Verified OK [2025-09-24 06:20:39.277] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:20:39.915] Verified OK [2025-09-24 06:20:39.915] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:20:42.729] fs.protected_hardlinks = 1 [2025-09-24 06:20:42.745] fs.protected_symlinks = 1 [2025-09-24 06:20:42.745] kernel.modules_disabled = 1 [2025-09-24 06:20:42.936] [2025-09-24 06:20:42.936] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:20:44.278] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:20:52.058] SBL1:1210.0.1.0 [2025-09-24 06:20:52.106] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:20:53.672] SBL2:1210.0.1.0 [2025-09-24 06:20:53.720] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:20:53.816] j-A [2025-09-24 06:21:01.173] The R5 Autosar Classic is running [2025-09-24 06:21:01.195] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:21:01.195] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:21:01.802] INIT: version 2.96 booting [2025-09-24 06:21:01.914] INIT: Entering runlevel: 5 [2025-09-24 06:21:02.074] mtd32 attached [2025-09-24 06:21:02.074] mtd28 attached [2025-09-24 06:21:02.090] mtd24 attached [2025-09-24 06:21:02.122] ubi0:dml_code is mounted. [2025-09-24 06:21:02.138] RTNETLINK answers: File exists [2025-09-24 06:21:02.138] ubi1:animations is mounted. [2025-09-24 06:21:02.202] ubi2:textures is mounted. [2025-09-24 06:21:02.202] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:21:02.202] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:21:02.202] data.LB_FadeInType0=100 [2025-09-24 06:21:02.202] data.CHLH_FadeInType0=0 [2025-09-24 06:21:02.202] data.WU_FadeInDelay=0 [2025-09-24 06:21:02.202] max_time_out=0 [2025-09-24 06:21:02.202] No splash screen [2025-09-24 06:21:02.202] stop dss Done [2025-09-24 06:21:02.202] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:21:02.202] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:21:02.202] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:21:02.234] /dev/mem opened. [2025-09-24 06:21:02.234] Memory mapped at address 0xffff82326000. [2025-09-24 06:21:02.260] Read at address 0x00600018 (0xffff82326018): 0x00000000 [2025-09-24 06:21:02.260] Write at address 0x00600018 (0xffff82326018): 0x00400040, readback 0x00400040 [2025-09-24 06:21:02.319] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:21:02.319] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:21:02.539] Loaded PowerVR consumer services. [2025-09-24 06:21:02.539] Waiting data available... [2025-09-24 06:21:02.555] 512+0 records in [2025-09-24 06:21:02.555] 512+0 records out [2025-09-24 06:21:02.586] Starting syslogd/klogd: done [2025-09-24 06:21:02.602] DML Start [2025-09-24 06:21:02.763] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:21:03.003] DML res1: 0 [2025-09-24 06:21:03.466] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:21:03.482] Read Success [2025-09-24 06:21:03.482] Verifying certificate... [2025-09-24 06:21:03.738] Verified OK [2025-09-24 06:21:03.754] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:21:05.513] Verified OK [2025-09-24 06:21:05.513] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:21:06.087] Verified OK [2025-09-24 06:21:06.087] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:21:08.565] fs.protected_hardlinks = 1 [2025-09-24 06:21:08.581] fs.protected_symlinks = 1 [2025-09-24 06:21:08.581] kernel.modules_disabled = 1 [2025-09-24 06:21:08.773] [2025-09-24 06:21:08.773] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:21:10.015] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:21:17.867] SBL1:1210.0.1.0 [2025-09-24 06:21:17.899] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:21:19.482] SBL2:1210.0.1.0 [2025-09-24 06:21:19.514] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:21:19.626] j-A [2025-09-24 06:21:27.002] The R5 Autosar Classic is running [2025-09-24 06:21:27.002] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:21:27.002] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:21:27.609] INIT: version 2.96 booting [2025-09-24 06:21:27.721] INIT: Entering runlevel: 5 [2025-09-24 06:21:27.865] mtd24 attached [2025-09-24 06:21:27.881] mtd32 attached [2025-09-24 06:21:27.897] mtd28 attached [2025-09-24 06:21:27.929] ubi0:textures is mounted. [2025-09-24 06:21:27.945] RTNETLINK answers: File exists [2025-09-24 06:21:27.975] ubi1:dml_code is mounted. [2025-09-24 06:21:27.975] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:21:27.975] ubi2:animations is mounted. [2025-09-24 06:21:27.975] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:21:27.975] data.LB_FadeInType0=100 [2025-09-24 06:21:28.007] data.CHLH_FadeInType0=0 [2025-09-24 06:21:28.007] data.WU_FadeInDelay=0 [2025-09-24 06:21:28.007] max_time_out=0 [2025-09-24 06:21:28.007] No splash screen [2025-09-24 06:21:28.007] stop dss Done [2025-09-24 06:21:28.007] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:21:28.007] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:21:28.007] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:21:28.089] /dev/mem opened. [2025-09-24 06:21:28.089] Memory mapped at address 0xffffa6d22000. [2025-09-24 06:21:28.089] Read at address 0x00600018 (0xffffa6d22018): 0x00000000 [2025-09-24 06:21:28.089] Write at address 0x00600018 (0xffffa6d22018): 0x00400040, readback 0x00400040 [2025-09-24 06:21:28.089] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:21:28.089] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:21:28.153] Loaded PowerVR consumer services. [2025-09-24 06:21:28.345] Waiting data available... [2025-09-24 06:21:28.361] 512+0 records in [2025-09-24 06:21:28.361] 512+0 records out [2025-09-24 06:21:28.425] Starting syslogd/klogd: done [2025-09-24 06:21:28.440] DML Start [2025-09-24 06:21:28.617] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:21:28.857] DML res1: 0 [2025-09-24 06:21:29.241] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:21:29.241] Read Success [2025-09-24 06:21:29.257] Verifying certificate... [2025-09-24 06:21:29.512] Verified OK [2025-09-24 06:21:29.528] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:21:31.184] Verified OK [2025-09-24 06:21:31.184] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:21:31.822] Verified OK [2025-09-24 06:21:31.822] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:21:34.460] fs.protected_hardlinks = 1 [2025-09-24 06:21:34.476] fs.protected_symlinks = 1 [2025-09-24 06:21:34.476] kernel.modules_disabled = 1 [2025-09-24 06:21:34.668] [2025-09-24 06:21:34.668] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:21:35.863] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:21:43.652] SBL1:1210.0.1.0 [2025-09-24 06:21:43.684] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:21:45.266] SBL2:1210.0.1.0 [2025-09-24 06:21:45.298] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:21:45.410] j-A [2025-09-24 06:21:52.783] The R5 Autosar Classic is running [2025-09-24 06:21:52.783] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:21:52.783] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:21:53.391] INIT: version 2.96 booting [2025-09-24 06:21:53.502] INIT: Entering runlevel: 5 [2025-09-24 06:21:53.663] mtd28 attached [2025-09-24 06:21:53.663] mtd24 attached [2025-09-24 06:21:53.679] mtd32 attached [2025-09-24 06:21:53.727] ubi0:animations is mounted. [2025-09-24 06:21:53.727] RTNETLINK answers: File exists [2025-09-24 06:21:53.788] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:21:53.788] ubi1:textures is mounted. [2025-09-24 06:21:53.788] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:21:53.788] ubi2:dml_code is mounted. [2025-09-24 06:21:53.788] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:21:53.788] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:21:53.788] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:21:53.788] data.LB_FadeInType0=100 [2025-09-24 06:21:53.788] data.CHLH_FadeInType0=0 [2025-09-24 06:21:53.788] data.WU_FadeInDelay=0 [2025-09-24 06:21:53.788] max_time_out=0 [2025-09-24 06:21:53.788] No splash screen [2025-09-24 06:21:53.788] stop dss Done [2025-09-24 06:21:53.819] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:21:53.819] /dev/mem opened. [2025-09-24 06:21:53.851] Memory mapped at address 0xffffaf1a3000. [2025-09-24 06:21:53.851] Read at address 0x00600018 (0xffffaf1a3018): 0x00000000 [2025-09-24 06:21:53.851] Write at address 0x00600018 (0xffffaf1a3018): 0x00400040, readback 0x00400040 [2025-09-24 06:21:53.851] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:21:54.091] Loaded PowerVR consumer services. [2025-09-24 06:21:54.155] Waiting data available... [2025-09-24 06:21:54.188] 512+0 records in [2025-09-24 06:21:54.188] 512+0 records out [2025-09-24 06:21:54.219] Starting syslogd/klogd: done [2025-09-24 06:21:54.235] DML Start [2025-09-24 06:21:54.379] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:21:54.571] DML res1: 0 [2025-09-24 06:21:55.139] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:21:55.139] Read Success [2025-09-24 06:21:55.139] Verifying certificate... [2025-09-24 06:21:55.394] Verified OK [2025-09-24 06:21:55.427] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:21:57.118] Verified OK [2025-09-24 06:21:57.118] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:21:57.629] Verified OK [2025-09-24 06:21:57.629] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:22:00.044] fs.protected_hardlinks = 1 [2025-09-24 06:22:00.044] fs.protected_symlinks = 1 [2025-09-24 06:22:00.060] kernel.modules_disabled = 1 [2025-09-24 06:22:00.236] [2025-09-24 06:22:00.236] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:22:01.654] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:22:09.445] SBL1:1210.0.1.0 [2025-09-24 06:22:09.477] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:22:11.060] SBL2:1210.0.1.0 [2025-09-24 06:22:11.091] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:22:11.204] j-A [2025-09-24 06:22:18.580] The R5 Autosar Classic is running [2025-09-24 06:22:18.580] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:22:18.580] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:22:19.189] INIT: version 2.96 booting [2025-09-24 06:22:19.300] INIT: Entering runlevel: 5 [2025-09-24 06:22:19.445] mtd24 attached [2025-09-24 06:22:19.461] mtd28 attached [2025-09-24 06:22:19.493] ubi0:textures is mounted. [2025-09-24 06:22:19.493] mtd32 attached [2025-09-24 06:22:19.525] ubi1:animations is mounted. [2025-09-24 06:22:19.525] RTNETLINK answers: File exists [2025-09-24 06:22:19.566] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:22:19.566] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:22:19.566] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:22:19.566] ubi2:dml_code is mounted. [2025-09-24 06:22:19.566] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:22:19.566] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:22:19.566] data.LB_FadeInType0=100 [2025-09-24 06:22:19.587] data.CHLH_FadeInType0=0 [2025-09-24 06:22:19.587] data.WU_FadeInDelay=0 [2025-09-24 06:22:19.587] max_time_out=0 [2025-09-24 06:22:19.587] No splash screen [2025-09-24 06:22:19.587] stop dss Done [2025-09-24 06:22:19.619] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:22:19.619] /dev/mem opened. [2025-09-24 06:22:19.651] Memory mapped at address 0xffff92997000. [2025-09-24 06:22:19.651] Read at address 0x00600018 (0xffff92997018): 0x00000000 [2025-09-24 06:22:19.651] Write at address 0x00600018 (0xffff92997018): 0x00400040, readback 0x00400040 [2025-09-24 06:22:19.651] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:22:19.763] Loaded PowerVR consumer services. [2025-09-24 06:22:19.923] Waiting data available... [2025-09-24 06:22:19.939] 512+0 records in [2025-09-24 06:22:19.955] 512+0 records out [2025-09-24 06:22:20.003] Starting syslogd/klogd: done [2025-09-24 06:22:20.019] DML Start [2025-09-24 06:22:20.195] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:22:20.467] DML res1: 0 [2025-09-24 06:22:20.786] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:22:20.808] Read Success [2025-09-24 06:22:20.808] Verifying certificate... [2025-09-24 06:22:21.047] Verified OK [2025-09-24 06:22:21.063] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:22:22.674] Verified OK [2025-09-24 06:22:22.674] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:22:23.306] Verified OK [2025-09-24 06:22:23.306] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:22:25.993] fs.protected_hardlinks = 1 [2025-09-24 06:22:26.009] fs.protected_symlinks = 1 [2025-09-24 06:22:26.009] kernel.modules_disabled = 1 [2025-09-24 06:22:26.200] [2025-09-24 06:22:26.200] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:22:27.527] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:22:35.226] SBL1:1210.0.1.0 [2025-09-24 06:22:35.258] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:22:36.841] SBL2:1210.0.1.0 [2025-09-24 06:22:36.873] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:22:36.985] j-A [2025-09-24 06:22:44.340] The R5 Autosar Classic is running [2025-09-24 06:22:44.340] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:22:44.361] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:22:44.969] INIT: version 2.96 booting [2025-09-24 06:22:45.080] INIT: Entering runlevel: 5 [2025-09-24 06:22:45.225] mtd28 attached [2025-09-24 06:22:45.240] mtd24 attached [2025-09-24 06:22:45.256] mtd32 attached [2025-09-24 06:22:45.288] ubi1:textures is mounted. [2025-09-24 06:22:45.362] RTNETLINK answers: File exists [2025-09-24 06:22:45.362] ubi0:animations is mounted. [2025-09-24 06:22:45.362] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:22:45.362] ubi2:dml_code is mounted. [2025-09-24 06:22:45.362] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:22:45.362] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:22:45.362] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:22:45.362] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:22:45.362] data.LB_FadeInType0=100 [2025-09-24 06:22:45.362] data.CHLH_FadeInType0=0 [2025-09-24 06:22:45.362] data.WU_FadeInDelay=0 [2025-09-24 06:22:45.362] max_time_out=0 [2025-09-24 06:22:45.362] No splash screen [2025-09-24 06:22:45.362] stop dss Done [2025-09-24 06:22:45.394] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:22:45.435] /dev/mem opened. [2025-09-24 06:22:45.435] Memory mapped at address 0xffffbf514000. [2025-09-24 06:22:45.435] Read at address 0x00600018 (0xffffbf514018): 0x00000000 [2025-09-24 06:22:45.435] Write at address 0x00600018 (0xffffbf514018): 0x00400040, readback 0x00400040 [2025-09-24 06:22:45.435] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:22:45.595] Loaded PowerVR consumer services. [2025-09-24 06:22:45.707] Waiting data available... [2025-09-24 06:22:45.739] 512+0 records in [2025-09-24 06:22:45.739] 512+0 records out [2025-09-24 06:22:45.755] Starting syslogd/klogd: done [2025-09-24 06:22:45.787] DML Start [2025-09-24 06:22:45.963] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:22:46.139] DML res1: 0 [2025-09-24 06:22:46.651] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:22:46.666] Read Success [2025-09-24 06:22:46.666] Verifying certificate... [2025-09-24 06:22:46.970] Verified OK [2025-09-24 06:22:47.002] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:22:48.504] Verified OK [2025-09-24 06:22:48.504] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:22:49.032] Verified OK [2025-09-24 06:22:49.032] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:22:51.623] fs.protected_hardlinks = 1 [2025-09-24 06:22:51.652] fs.protected_symlinks = 1 [2025-09-24 06:22:51.652] kernel.modules_disabled = 1 [2025-09-24 06:22:51.827] [2025-09-24 06:22:51.827] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:22:53.195] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:23:01.031] SBL1:1210.0.1.0 [2025-09-24 06:23:01.079] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:23:02.647] SBL2:1210.0.1.0 [2025-09-24 06:23:02.694] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:23:02.806] j-A [2025-09-24 06:23:10.144] The R5 Autosar Classic is running [2025-09-24 06:23:10.175] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:23:10.175] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:23:10.783] INIT: version 2.96 booting [2025-09-24 06:23:10.895] INIT: Entering runlevel: 5 [2025-09-24 06:23:11.055] mtd24 attached [2025-09-24 06:23:11.071] mtd32 attached [2025-09-24 06:23:11.071] mtd28 attached [2025-09-24 06:23:11.103] ubi0:textures is mounted. [2025-09-24 06:23:11.187] RTNETLINK answers: File exists [2025-09-24 06:23:11.187] ubi1:dml_code is mounted. [2025-09-24 06:23:11.187] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:23:11.187] ubi2:animations is mounted. [2025-09-24 06:23:11.187] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:23:11.187] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:23:11.187] data.LB_FadeInType0=100 [2025-09-24 06:23:11.187] data.CHLH_FadeInType0=0 [2025-09-24 06:23:11.187] data.WU_FadeInDelay=0 [2025-09-24 06:23:11.187] max_time_out=0 [2025-09-24 06:23:11.187] No splash screen [2025-09-24 06:23:11.187] stop dss Done [2025-09-24 06:23:11.187] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:23:11.187] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:23:11.252] /dev/mem opened. [2025-09-24 06:23:11.252] Memory mapped at address 0xffff80018000. [2025-09-24 06:23:11.252] Read at address 0x00600018 (0xffff80018018): 0x00000000 [2025-09-24 06:23:11.252] Write at address 0x00600018 (0xffff80018018): 0x00400040, readback 0x00400040 [2025-09-24 06:23:11.267] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:23:11.283] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:23:11.460] Loaded PowerVR consumer services. [2025-09-24 06:23:11.555] Waiting data available... [2025-09-24 06:23:11.571] 512+0 records in [2025-09-24 06:23:11.571] 512+0 records out [2025-09-24 06:23:11.604] Starting syslogd/klogd: done [2025-09-24 06:23:11.620] DML Start [2025-09-24 06:23:11.780] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:23:12.003] DML res1: 0 [2025-09-24 06:23:12.473] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:23:12.473] Read Success [2025-09-24 06:23:12.473] Verifying certificate... [2025-09-24 06:23:12.713] Verified OK [2025-09-24 06:23:12.729] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:23:14.403] Verified OK [2025-09-24 06:23:14.403] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:23:15.023] Verified OK [2025-09-24 06:23:15.023] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:23:17.661] fs.protected_hardlinks = 1 [2025-09-24 06:23:17.661] fs.protected_symlinks = 1 [2025-09-24 06:23:17.677] kernel.modules_disabled = 1 [2025-09-24 06:23:17.885] [2025-09-24 06:23:17.885] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:23:19.049] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:23:26.838] SBL1:1210.0.1.0 [2025-09-24 06:23:26.869] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:23:28.452] SBL2:1210.0.1.0 [2025-09-24 06:23:28.484] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:23:28.596] j-A [2025-09-24 06:23:35.950] The R5 Autosar Classic is running [2025-09-24 06:23:35.950] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:23:35.971] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:23:36.579] INIT: version 2.96 booting [2025-09-24 06:23:36.691] INIT: Entering runlevel: 5 [2025-09-24 06:23:36.850] mtd24 attached [2025-09-24 06:23:36.866] mtd32 attached [2025-09-24 06:23:36.866] mtd28 attached [2025-09-24 06:23:36.882] ubi0:textures is mounted. [2025-09-24 06:23:36.914] ubi1:dml_code is mounted. [2025-09-24 06:23:36.981] RTNETLINK answers: File exists [2025-09-24 06:23:36.981] ubi2:animations is mounted. [2025-09-24 06:23:36.981] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:23:36.981] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:23:36.981] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:23:36.981] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:23:36.981] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:23:36.981] data.LB_FadeInType0=100 [2025-09-24 06:23:36.981] data.CHLH_FadeInType0=0 [2025-09-24 06:23:36.981] data.WU_FadeInDelay=0 [2025-09-24 06:23:36.981] max_time_out=0 [2025-09-24 06:23:36.981] No splash screen [2025-09-24 06:23:36.981] stop dss Done [2025-09-24 06:23:36.997] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:23:37.019] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:23:37.035] /dev/mem opened. [2025-09-24 06:23:37.035] Memory mapped at address 0xffff93869000. [2025-09-24 06:23:37.061] Read at address 0x00600018 (0xffff93869018): 0x00000000 [2025-09-24 06:23:37.061] Write at address 0x00600018 (0xffff93869018): 0x00400040, readback 0x00400040 [2025-09-24 06:23:37.140] Loaded PowerVR consumer services. [2025-09-24 06:23:37.316] Waiting data available... [2025-09-24 06:23:37.332] 512+0 records in [2025-09-24 06:23:37.332] 512+0 records out [2025-09-24 06:23:37.380] Starting syslogd/klogd: done [2025-09-24 06:23:37.396] DML Start [2025-09-24 06:23:37.588] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:23:37.780] DML res1: 0 [2025-09-24 06:23:38.220] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:23:38.220] Read Success [2025-09-24 06:23:38.220] Verifying certificate... [2025-09-24 06:23:38.444] Verified OK [2025-09-24 06:23:38.460] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:23:40.193] Verified OK [2025-09-24 06:23:40.193] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:23:40.824] Verified OK [2025-09-24 06:23:40.824] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:23:43.462] fs.protected_hardlinks = 1 [2025-09-24 06:23:43.462] fs.protected_symlinks = 1 [2025-09-24 06:23:43.478] kernel.modules_disabled = 1 [2025-09-24 06:23:43.686] [2025-09-24 06:23:43.686] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:23:44.829] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:23:52.648] SBL1:1210.0.1.0 [2025-09-24 06:23:52.696] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:23:54.262] SBL2:1210.0.1.0 [2025-09-24 06:23:54.310] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:23:54.407] j-A [2025-09-24 06:24:01.760] The R5 Autosar Classic is running [2025-09-24 06:24:01.783] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:24:01.783] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:24:02.391] INIT: version 2.96 booting [2025-09-24 06:24:02.502] INIT: Entering runlevel: 5 [2025-09-24 06:24:02.662] mtd24 attached [2025-09-24 06:24:02.662] mtd28 attached [2025-09-24 06:24:02.678] mtd32 attached [2025-09-24 06:24:02.727] RTNETLINK answers: File exists [2025-09-24 06:24:02.797] ubi0:textures is mounted. [2025-09-24 06:24:02.797] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:24:02.797] ubi1:animations is mounted. [2025-09-24 06:24:02.797] ubi2:dml_code is mounted. [2025-09-24 06:24:02.797] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:24:02.797] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:24:02.797] data.LB_FadeInType0=100 [2025-09-24 06:24:02.797] data.CHLH_FadeInType0=0 [2025-09-24 06:24:02.797] data.WU_FadeInDelay=0 [2025-09-24 06:24:02.797] max_time_out=0 [2025-09-24 06:24:02.797] No splash screen [2025-09-24 06:24:02.797] stop dss Done [2025-09-24 06:24:02.797] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:24:02.797] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:24:02.828] /dev/mem opened. [2025-09-24 06:24:02.828] Memory mapped at address 0xffff82090000. [2025-09-24 06:24:02.854] Read at address 0x00600018 (0xffff82090018): 0x00000000 [2025-09-24 06:24:02.854] Write at address 0x00600018 (0xffff82090018): 0x00400040, readback 0x00400040 [2025-09-24 06:24:02.886] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:24:02.902] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:24:03.110] Loaded PowerVR consumer services. [2025-09-24 06:24:03.174] Waiting data available... [2025-09-24 06:24:03.190] 512+0 records in [2025-09-24 06:24:03.190] 512+0 records out [2025-09-24 06:24:03.222] Starting syslogd/klogd: done [2025-09-24 06:24:03.222] DML Start [2025-09-24 06:24:03.382] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:24:03.670] DML res1: 0 [2025-09-24 06:24:04.046] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:24:04.046] Read Success [2025-09-24 06:24:04.046] Verifying certificate... [2025-09-24 06:24:04.302] Verified OK [2025-09-24 06:24:04.318] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:24:05.976] Verified OK [2025-09-24 06:24:05.976] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:24:06.536] Verified OK [2025-09-24 06:24:06.536] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:24:09.142] fs.protected_hardlinks = 1 [2025-09-24 06:24:09.158] fs.protected_symlinks = 1 [2025-09-24 06:24:09.174] kernel.modules_disabled = 1 [2025-09-24 06:24:09.366] [2025-09-24 06:24:09.366] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:24:10.738] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:24:18.442] SBL1:1210.0.1.0 [2025-09-24 06:24:18.474] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:24:20.057] SBL2:1210.0.1.0 [2025-09-24 06:24:20.089] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:24:20.200] j-A [2025-09-24 06:24:27.571] The R5 Autosar Classic is running [2025-09-24 06:24:27.571] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:24:27.571] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:24:28.179] INIT: version 2.96 booting [2025-09-24 06:24:28.290] INIT: Entering runlevel: 5 [2025-09-24 06:24:28.450] mtd32 attached [2025-09-24 06:24:28.450] mtd24 attached [2025-09-24 06:24:28.466] mtd28 attached [2025-09-24 06:24:28.514] ubi0:dml_code is mounted. [2025-09-24 06:24:28.514] RTNETLINK answers: File exists [2025-09-24 06:24:28.551] ubi2:animations is mounted. [2025-09-24 06:24:28.551] ubi1:textures is mounted. [2025-09-24 06:24:28.551] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:24:28.551] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:24:28.551] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:24:28.585] data.LB_FadeInType0=100 [2025-09-24 06:24:28.585] data.CHLH_FadeInType0=0 [2025-09-24 06:24:28.585] data.WU_FadeInDelay=0 [2025-09-24 06:24:28.585] max_time_out=0 [2025-09-24 06:24:28.585] No splash screen [2025-09-24 06:24:28.585] stop dss Done [2025-09-24 06:24:28.585] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:24:28.585] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:24:28.657] /dev/mem opened. [2025-09-24 06:24:28.657] Memory mapped at address 0xffffab8b9000. [2025-09-24 06:24:28.657] Read at address 0x00600018 (0xffffab8b9018): 0x00000000 [2025-09-24 06:24:28.657] Write at address 0x00600018 (0xffffab8b9018): 0x00400040, readback 0x00400040 [2025-09-24 06:24:28.721] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:24:28.737] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:24:28.865] Loaded PowerVR consumer services. [2025-09-24 06:24:28.945] Waiting data available... [2025-09-24 06:24:28.961] 512+0 records in [2025-09-24 06:24:28.961] 512+0 records out [2025-09-24 06:24:28.993] Starting syslogd/klogd: done [2025-09-24 06:24:29.008] DML Start [2025-09-24 06:24:29.201] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:24:29.377] DML res1: 0 [2025-09-24 06:24:29.885] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:24:29.885] Read Success [2025-09-24 06:24:29.885] Verifying certificate... [2025-09-24 06:24:30.125] Verified OK [2025-09-24 06:24:30.141] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:24:31.799] Verified OK [2025-09-24 06:24:31.799] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:24:32.384] Verified OK [2025-09-24 06:24:32.384] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:24:34.894] fs.protected_hardlinks = 1 [2025-09-24 06:24:34.923] fs.protected_symlinks = 1 [2025-09-24 06:24:34.923] kernel.modules_disabled = 1 [2025-09-24 06:24:35.115] [2025-09-24 06:24:35.115] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:24:36.453] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:24:44.214] SBL1:1210.0.1.0 [2025-09-24 06:24:44.262] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:24:45.829] SBL2:1210.0.1.0 [2025-09-24 06:24:45.877] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:24:45.989] j-A [2025-09-24 06:24:53.328] The R5 Autosar Classic is running [2025-09-24 06:24:53.359] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:24:53.359] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:24:53.966] INIT: version 2.96 booting [2025-09-24 06:24:54.079] INIT: Entering runlevel: 5 [2025-09-24 06:24:54.222] mtd24 attached [2025-09-24 06:24:54.238] mtd28 attached [2025-09-24 06:24:54.254] mtd32 attached [2025-09-24 06:24:54.358] ubi0:textures is mounted. [2025-09-24 06:24:54.358] RTNETLINK answers: File exists [2025-09-24 06:24:54.358] ubi1:animations is mounted. [2025-09-24 06:24:54.358] ubi2:dml_code is mounted. [2025-09-24 06:24:54.358] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:24:54.358] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:24:54.358] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:24:54.358] data.LB_FadeInType0=100 [2025-09-24 06:24:54.358] data.CHLH_FadeInType0=0 [2025-09-24 06:24:54.358] data.WU_FadeInDelay=0 [2025-09-24 06:24:54.358] max_time_out=0 [2025-09-24 06:24:54.358] No splash screen [2025-09-24 06:24:54.358] stop dss Done [2025-09-24 06:24:54.358] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:24:54.358] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:24:54.424] /dev/mem opened. [2025-09-24 06:24:54.424] Memory mapped at address 0xffffb5a30000. [2025-09-24 06:24:54.424] Read at address 0x00600018 (0xffffb5a30018): 0x00000000 [2025-09-24 06:24:54.424] Write at address 0x00600018 (0xffffb5a30018): 0x00400040, readback 0x00400040 [2025-09-24 06:24:54.448] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:24:54.448] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:24:54.512] Loaded PowerVR consumer services. [2025-09-24 06:24:54.704] Waiting data available... [2025-09-24 06:24:54.720] 512+0 records in [2025-09-24 06:24:54.720] 512+0 records out [2025-09-24 06:24:54.752] Starting syslogd/klogd: done [2025-09-24 06:24:54.768] DML Start [2025-09-24 06:24:54.944] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:24:55.152] DML res1: 0 [2025-09-24 06:24:55.604] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:24:55.604] Read Success [2025-09-24 06:24:55.604] Verifying certificate... [2025-09-24 06:24:55.828] Verified OK [2025-09-24 06:24:55.844] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:24:57.667] Verified OK [2025-09-24 06:24:57.667] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:24:58.241] Verified OK [2025-09-24 06:24:58.241] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:25:00.574] fs.protected_hardlinks = 1 [2025-09-24 06:25:00.590] fs.protected_symlinks = 1 [2025-09-24 06:25:00.590] kernel.modules_disabled = 1 [2025-09-24 06:25:00.783] [2025-09-24 06:25:00.783] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:25:02.185] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:25:09.995] SBL1:1210.0.1.0 [2025-09-24 06:25:10.043] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:25:11.610] SBL2:1210.0.1.0 [2025-09-24 06:25:11.658] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:25:11.770] j-A [2025-09-24 06:25:19.109] The R5 Autosar Classic is running [2025-09-24 06:25:19.134] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:25:19.134] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:25:19.742] INIT: version 2.96 booting [2025-09-24 06:25:19.853] INIT: Entering runlevel: 5 [2025-09-24 06:25:19.997] mtd24 attached [2025-09-24 06:25:20.013] mtd32 attached [2025-09-24 06:25:20.030] mtd28 attached [2025-09-24 06:25:20.077] ubi0:textures is mounted. [2025-09-24 06:25:20.077] RTNETLINK answers: File exists [2025-09-24 06:25:20.139] ubi2:animations is mounted. [2025-09-24 06:25:20.139] ubi1:dml_code is mounted. [2025-09-24 06:25:20.139] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:25:20.139] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:25:20.139] data.LB_FadeInType0=100 [2025-09-24 06:25:20.139] data.CHLH_FadeInType0=0 [2025-09-24 06:25:20.139] data.WU_FadeInDelay=0 [2025-09-24 06:25:20.139] max_time_out=0 [2025-09-24 06:25:20.139] No splash screen [2025-09-24 06:25:20.139] stop dss Done [2025-09-24 06:25:20.139] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:25:20.139] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:25:20.139] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:25:20.208] /dev/mem opened. [2025-09-24 06:25:20.208] Memory mapped at address 0xffff8db31000. [2025-09-24 06:25:20.208] Read at address 0x00600018 (0xffff8db31018): 0x00000000 [2025-09-24 06:25:20.208] Write at address 0x00600018 (0xffff8db31018): 0x00400040, readback 0x00400040 [2025-09-24 06:25:20.240] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:25:20.256] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:25:20.353] Loaded PowerVR consumer services. [2025-09-24 06:25:20.480] Waiting data available... [2025-09-24 06:25:20.512] 512+0 records in [2025-09-24 06:25:20.512] 512+0 records out [2025-09-24 06:25:20.544] Starting syslogd/klogd: done [2025-09-24 06:25:20.560] DML Start [2025-09-24 06:25:20.736] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:25:20.927] DML res1: 0 [2025-09-24 06:25:21.433] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:25:21.433] Read Success [2025-09-24 06:25:21.433] Verifying certificate... [2025-09-24 06:25:21.704] Verified OK [2025-09-24 06:25:21.752] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:25:23.526] Verified OK [2025-09-24 06:25:23.526] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:25:24.031] Verified OK [2025-09-24 06:25:24.031] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:25:26.397] fs.protected_hardlinks = 1 [2025-09-24 06:25:26.397] fs.protected_symlinks = 1 [2025-09-24 06:25:26.413] kernel.modules_disabled = 1 [2025-09-24 06:25:26.620] [2025-09-24 06:25:26.620] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:25:27.990] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:25:35.794] SBL1:1210.0.1.0 [2025-09-24 06:25:35.842] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:25:37.409] SBL2:1210.0.1.0 [2025-09-24 06:25:37.457] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:25:37.553] j-A [2025-09-24 06:25:44.909] The R5 Autosar Classic is running [2025-09-24 06:25:44.930] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:25:44.930] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:25:45.538] INIT: version 2.96 booting [2025-09-24 06:25:45.650] INIT: Entering runlevel: 5 [2025-09-24 06:25:45.810] mtd32 attached [2025-09-24 06:25:45.810] mtd28 attached [2025-09-24 06:25:45.825] mtd24 attached [2025-09-24 06:25:45.874] ubi0:dml_code is mounted. [2025-09-24 06:25:45.943] RTNETLINK answers: File exists [2025-09-24 06:25:45.943] ubi1:animations is mounted. [2025-09-24 06:25:45.943] ubi2:textures is mounted. [2025-09-24 06:25:45.943] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:25:45.943] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:25:45.943] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:25:45.943] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:25:45.943] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:25:45.943] data.LB_FadeInType0=100 [2025-09-24 06:25:45.943] data.CHLH_FadeInType0=0 [2025-09-24 06:25:45.943] data.WU_FadeInDelay=0 [2025-09-24 06:25:45.943] max_time_out=0 [2025-09-24 06:25:45.943] No splash screen [2025-09-24 06:25:45.943] stop dss Done [2025-09-24 06:25:45.990] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:25:46.024] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:25:46.024] /dev/mem opened. [2025-09-24 06:25:46.024] Memory mapped at address 0xffff887f9000. [2025-09-24 06:25:46.024] Read at address 0x00600018 (0xffff887f9018): 0x00000000 [2025-09-24 06:25:46.024] Write at address 0x00600018 (0xffff887f9018): 0x00400040, readback 0x00400040 [2025-09-24 06:25:46.153] Loaded PowerVR consumer services. [2025-09-24 06:25:46.307] Waiting data available... [2025-09-24 06:25:46.307] 512+0 records in [2025-09-24 06:25:46.307] 512+0 records out [2025-09-24 06:25:46.323] Starting syslogd/klogd: done [2025-09-24 06:25:46.355] DML Start [2025-09-24 06:25:46.531] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:25:46.739] DML res1: 0 [2025-09-24 06:25:47.166] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:25:47.166] Read Success [2025-09-24 06:25:47.166] Verifying certificate... [2025-09-24 06:25:47.390] Verified OK [2025-09-24 06:25:47.406] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:25:48.908] Verified OK [2025-09-24 06:25:48.908] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:25:49.500] Verified OK [2025-09-24 06:25:49.500] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:25:52.346] fs.protected_hardlinks = 1 [2025-09-24 06:25:52.346] fs.protected_symlinks = 1 [2025-09-24 06:25:52.362] kernel.modules_disabled = 1 [2025-09-24 06:25:52.553] [2025-09-24 06:25:52.553] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:25:53.752] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:26:01.592] SBL1:1210.0.1.0 [2025-09-24 06:26:01.624] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:26:03.206] SBL2:1210.0.1.0 [2025-09-24 06:26:03.238] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:26:03.350] j-A [2025-09-24 06:26:10.726] The R5 Autosar Classic is running [2025-09-24 06:26:10.726] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:26:10.726] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:26:11.333] INIT: version 2.96 booting [2025-09-24 06:26:11.445] INIT: Entering runlevel: 5 [2025-09-24 06:26:11.605] mtd24 attached [2025-09-24 06:26:11.605] mtd28 attached [2025-09-24 06:26:11.637] mtd32 attached [2025-09-24 06:26:11.669] ubi0:textures is mounted. [2025-09-24 06:26:11.669] RTNETLINK answers: File exists [2025-09-24 06:26:11.711] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:26:11.711] ubi1:animations is mounted. [2025-09-24 06:26:11.711] ubi2:dml_code is mounted. [2025-09-24 06:26:11.711] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:26:11.711] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:26:11.711] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:26:11.738] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:26:11.738] data.LB_FadeInType0=100 [2025-09-24 06:26:11.738] data.CHLH_FadeInType0=0 [2025-09-24 06:26:11.738] data.WU_FadeInDelay=0 [2025-09-24 06:26:11.738] max_time_out=0 [2025-09-24 06:26:11.738] No splash screen [2025-09-24 06:26:11.738] stop dss Done [2025-09-24 06:26:11.817] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:26:11.817] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:26:11.817] /dev/mem opened. [2025-09-24 06:26:11.817] Memory mapped at address 0xffff85be0000. [2025-09-24 06:26:11.817] Read at address 0x00600018 (0xffff85be0018): 0x00000000 [2025-09-24 06:26:11.817] Write at address 0x00600018 (0xffff85be0018): 0x00400040, readback 0x00400040 [2025-09-24 06:26:11.913] Loaded PowerVR consumer services. [2025-09-24 06:26:12.089] Waiting data available... [2025-09-24 06:26:12.089] 512+0 records in [2025-09-24 06:26:12.105] 512+0 records out [2025-09-24 06:26:12.121] Starting syslogd/klogd: done [2025-09-24 06:26:12.137] DML Start [2025-09-24 06:26:12.282] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:26:12.474] DML res1: 0 [2025-09-24 06:26:12.981] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:26:12.981] Read Success [2025-09-24 06:26:12.981] Verifying certificate... [2025-09-24 06:26:13.221] Verified OK [2025-09-24 06:26:13.237] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:26:14.912] Verified OK [2025-09-24 06:26:14.912] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:26:15.589] Verified OK [2025-09-24 06:26:15.589] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:26:18.227] fs.protected_hardlinks = 1 [2025-09-24 06:26:18.257] fs.protected_symlinks = 1 [2025-09-24 06:26:18.257] kernel.modules_disabled = 1 [2025-09-24 06:26:18.433] [2025-09-24 06:26:18.433] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:26:19.629] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:26:27.393] SBL1:1210.0.1.0 [2025-09-24 06:26:27.425] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:26:29.007] SBL2:1210.0.1.0 [2025-09-24 06:26:29.039] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:26:29.152] j-A [2025-09-24 06:26:36.507] The R5 Autosar Classic is running [2025-09-24 06:26:36.507] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:26:36.528] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:26:37.136] INIT: version 2.96 booting [2025-09-24 06:26:37.247] INIT: Entering runlevel: 5 [2025-09-24 06:26:37.408] mtd32 attached [2025-09-24 06:26:37.408] mtd28 attached [2025-09-24 06:26:37.424] mtd24 attached [2025-09-24 06:26:37.472] ubi0:dml_code is mounted. [2025-09-24 06:26:37.472] RTNETLINK answers: File exists [2025-09-24 06:26:37.512] ubi1:animations is mounted. [2025-09-24 06:26:37.512] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:26:37.512] ubi2:textures is mounted. [2025-09-24 06:26:37.512] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:26:37.512] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:26:37.512] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:26:37.512] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:26:37.541] data.LB_FadeInType0=100 [2025-09-24 06:26:37.541] data.CHLH_FadeInType0=0 [2025-09-24 06:26:37.541] data.WU_FadeInDelay=0 [2025-09-24 06:26:37.541] max_time_out=0 [2025-09-24 06:26:37.541] No splash screen [2025-09-24 06:26:37.541] stop dss Done [2025-09-24 06:26:37.572] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:26:37.588] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:26:37.631] /dev/mem opened. [2025-09-24 06:26:37.631] Memory mapped at address 0xffff80c5a000. [2025-09-24 06:26:37.631] Read at address 0x00600018 (0xffff80c5a018): 0x00000000 [2025-09-24 06:26:37.631] Write at address 0x00600018 (0xffff80c5a018): 0x00400040, readback 0x00400040 [2025-09-24 06:26:37.727] Loaded PowerVR consumer services. [2025-09-24 06:26:37.880] 512+0 records in [2025-09-24 06:26:37.880] 512+0 records out [2025-09-24 06:26:37.880] Waiting data available... [2025-09-24 06:26:37.896] Starting syslogd/klogd: done [2025-09-24 06:26:37.912] DML Start [2025-09-24 06:26:38.088] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:26:38.312] DML res1: 0 [2025-09-24 06:26:38.752] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:26:38.752] Read Success [2025-09-24 06:26:38.752] Verifying certificate... [2025-09-24 06:26:38.976] Verified OK [2025-09-24 06:26:38.992] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:26:40.639] Verified OK [2025-09-24 06:26:40.639] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:26:41.290] Verified OK [2025-09-24 06:26:41.290] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:26:43.992] fs.protected_hardlinks = 1 [2025-09-24 06:26:44.021] fs.protected_symlinks = 1 [2025-09-24 06:26:44.021] kernel.modules_disabled = 1 [2025-09-24 06:26:44.197] [2025-09-24 06:26:44.197] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:26:45.349] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:26:53.159] SBL1:1210.0.1.0 [2025-09-24 06:26:53.207] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:26:54.774] SBL2:1210.0.1.0 [2025-09-24 06:26:54.821] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:26:54.934] j-A [2025-09-24 06:27:02.273] The R5 Autosar Classic is running [2025-09-24 06:27:02.298] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:27:02.298] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:27:02.905] INIT: version 2.96 booting [2025-09-24 06:27:03.017] INIT: Entering runlevel: 5 [2025-09-24 06:27:03.177] mtd32 attached [2025-09-24 06:27:03.177] mtd24 attached [2025-09-24 06:27:03.193] mtd28 attached [2025-09-24 06:27:03.241] RTNETLINK answers: File exists [2025-09-24 06:27:03.285] ubi1:textures is mounted. [2025-09-24 06:27:03.285] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:27:03.285] ubi0:dml_code is mounted. [2025-09-24 06:27:03.285] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:27:03.285] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:27:03.285] ubi2:animations is mounted. [2025-09-24 06:27:03.285] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:27:03.285] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:27:03.311] data.LB_FadeInType0=100 [2025-09-24 06:27:03.311] data.CHLH_FadeInType0=0 [2025-09-24 06:27:03.311] data.WU_FadeInDelay=0 [2025-09-24 06:27:03.311] max_time_out=0 [2025-09-24 06:27:03.311] No splash screen [2025-09-24 06:27:03.311] stop dss Done [2025-09-24 06:27:03.338] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:27:03.338] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:27:03.375] /dev/mem opened. [2025-09-24 06:27:03.375] Memory mapped at address 0xffff9cf3d000. [2025-09-24 06:27:03.375] Read at address 0x00600018 (0xffff9cf3d018): 0x00000000 [2025-09-24 06:27:03.375] Write at address 0x00600018 (0xffff9cf3d018): 0x00400040, readback 0x00400040 [2025-09-24 06:27:03.551] Loaded PowerVR consumer services. [2025-09-24 06:27:03.663] Waiting data available... [2025-09-24 06:27:03.679] 512+0 records in [2025-09-24 06:27:03.679] 512+0 records out [2025-09-24 06:27:03.726] Starting syslogd/klogd: done [2025-09-24 06:27:03.742] DML Start [2025-09-24 06:27:03.903] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:27:04.126] DML res1: 0 [2025-09-24 06:27:04.590] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:27:04.606] Read Success [2025-09-24 06:27:04.606] Verifying certificate... [2025-09-24 06:27:04.847] Verified OK [2025-09-24 06:27:04.863] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:27:06.572] Verified OK [2025-09-24 06:27:06.572] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:27:07.137] Verified OK [2025-09-24 06:27:07.137] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:27:09.664] fs.protected_hardlinks = 1 [2025-09-24 06:27:09.664] fs.protected_symlinks = 1 [2025-09-24 06:27:09.680] kernel.modules_disabled = 1 [2025-09-24 06:27:09.872] [2025-09-24 06:27:09.872] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:27:11.182] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:27:18.953] SBL1:1210.0.1.0 [2025-09-24 06:27:18.985] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:27:20.567] SBL2:1210.0.1.0 [2025-09-24 06:27:20.599] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:27:20.712] j-A [2025-09-24 06:27:28.066] The R5 Autosar Classic is running [2025-09-24 06:27:28.066] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:27:28.087] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:27:28.694] INIT: version 2.96 booting [2025-09-24 06:27:28.807] INIT: Entering runlevel: 5 [2025-09-24 06:27:28.950] mtd28 attached [2025-09-24 06:27:28.966] mtd24 attached [2025-09-24 06:27:28.982] mtd32 attached [2025-09-24 06:27:29.079] ubi0:animations is mounted. [2025-09-24 06:27:29.079] RTNETLINK answers: File exists [2025-09-24 06:27:29.079] ubi1:textures is mounted. [2025-09-24 06:27:29.079] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:27:29.079] ubi2:dml_code is mounted. [2025-09-24 06:27:29.079] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:27:29.079] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:27:29.079] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:27:29.079] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:27:29.079] data.LB_FadeInType0=100 [2025-09-24 06:27:29.079] data.CHLH_FadeInType0=0 [2025-09-24 06:27:29.079] data.WU_FadeInDelay=0 [2025-09-24 06:27:29.079] max_time_out=0 [2025-09-24 06:27:29.079] No splash screen [2025-09-24 06:27:29.079] stop dss Done [2025-09-24 06:27:29.127] /dev/mem opened. [2025-09-24 06:27:29.127] Memory mapped at address 0xffffb833c000. [2025-09-24 06:27:29.159] Read at address 0x00600018 (0xffffb833c018): 0x00000000 [2025-09-24 06:27:29.159] Write at address 0x00600018 (0xffffb833c018): 0x00400040, readback 0x00400040 [2025-09-24 06:27:29.159] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:27:29.159] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:27:29.255] Loaded PowerVR consumer services. [2025-09-24 06:27:29.415] Waiting data available... [2025-09-24 06:27:29.431] 512+0 records in [2025-09-24 06:27:29.431] 512+0 records out [2025-09-24 06:27:29.478] Starting syslogd/klogd: done [2025-09-24 06:27:29.511] DML Start [2025-09-24 06:27:29.703] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:27:29.927] DML res1: 0 [2025-09-24 06:27:30.294] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:27:30.294] Read Success [2025-09-24 06:27:30.311] Verifying certificate... [2025-09-24 06:27:30.518] Verified OK [2025-09-24 06:27:30.534] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:27:32.242] Verified OK [2025-09-24 06:27:32.242] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:27:32.770] Verified OK [2025-09-24 06:27:32.770] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:27:35.297] fs.protected_hardlinks = 1 [2025-09-24 06:27:35.312] fs.protected_symlinks = 1 [2025-09-24 06:27:35.312] kernel.modules_disabled = 1 [2025-09-24 06:27:35.521] [2025-09-24 06:27:35.521] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:27:36.975] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:27:44.735] SBL1:1210.0.1.0 [2025-09-24 06:27:44.783] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:27:46.349] SBL2:1210.0.1.0 [2025-09-24 06:27:46.397] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:27:46.509] j-A [2025-09-24 06:27:53.847] The R5 Autosar Classic is running [2025-09-24 06:27:53.878] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:27:53.878] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:27:54.486] INIT: version 2.96 booting [2025-09-24 06:27:54.598] INIT: Entering runlevel: 5 [2025-09-24 06:27:54.741] mtd24 attached [2025-09-24 06:27:54.757] mtd28 attached [2025-09-24 06:27:54.773] mtd32 attached [2025-09-24 06:27:54.874] ubi1:animations is mounted. [2025-09-24 06:27:54.874] RTNETLINK answers: File exists [2025-09-24 06:27:54.874] ubi0:textures is mounted. [2025-09-24 06:27:54.874] ubi2:dml_code is mounted. [2025-09-24 06:27:54.874] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:27:54.874] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:27:54.874] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:27:54.874] data.LB_FadeInType0=100 [2025-09-24 06:27:54.874] data.CHLH_FadeInType0=0 [2025-09-24 06:27:54.874] data.WU_FadeInDelay=0 [2025-09-24 06:27:54.874] max_time_out=0 [2025-09-24 06:27:54.874] No splash screen [2025-09-24 06:27:54.874] stop dss Done [2025-09-24 06:27:54.874] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:27:54.874] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:27:54.944] /dev/mem opened. [2025-09-24 06:27:54.944] Memory mapped at address 0xffff90826000. [2025-09-24 06:27:54.944] Read at address 0x00600018 (0xffff90826018): 0x00000000 [2025-09-24 06:27:54.944] Write at address 0x00600018 (0xffff90826018): 0x00400040, readback 0x00400040 [2025-09-24 06:27:54.990] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:27:54.990] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:27:55.134] Loaded PowerVR consumer services. [2025-09-24 06:27:55.230] Waiting data available... [2025-09-24 06:27:55.246] 512+0 records in [2025-09-24 06:27:55.246] 512+0 records out [2025-09-24 06:27:55.294] Starting syslogd/klogd: done [2025-09-24 06:27:55.310] DML Start [2025-09-24 06:27:55.485] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:27:55.693] DML res1: 0 [2025-09-24 06:27:56.124] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:27:56.124] Read Success [2025-09-24 06:27:56.124] Verifying certificate... [2025-09-24 06:27:56.396] Verified OK [2025-09-24 06:27:56.412] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:27:57.922] Verified OK [2025-09-24 06:27:57.922] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:27:58.562] Verified OK [2025-09-24 06:27:58.562] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:28:01.344] fs.protected_hardlinks = 1 [2025-09-24 06:28:01.344] fs.protected_symlinks = 1 [2025-09-24 06:28:01.360] kernel.modules_disabled = 1 [2025-09-24 06:28:01.552] [2025-09-24 06:28:01.552] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:28:02.773] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:28:10.548] SBL1:1210.0.1.0 [2025-09-24 06:28:10.596] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:28:12.163] SBL2:1210.0.1.0 [2025-09-24 06:28:12.210] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:28:12.307] j-A [2025-09-24 06:28:19.661] The R5 Autosar Classic is running [2025-09-24 06:28:19.686] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:28:19.686] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:28:20.294] INIT: version 2.96 booting [2025-09-24 06:28:20.421] INIT: Entering runlevel: 5 [2025-09-24 06:28:20.566] mtd28 attached [2025-09-24 06:28:20.582] mtd32 attached [2025-09-24 06:28:20.582] mtd24 attached [2025-09-24 06:28:20.629] ubi0:animations is mounted. [2025-09-24 06:28:20.645] RTNETLINK answers: File exists [2025-09-24 06:28:20.645] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:28:20.681] ubi2:textures is mounted. [2025-09-24 06:28:20.681] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:28:20.681] ubi1:dml_code is mounted. [2025-09-24 06:28:20.681] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:28:20.681] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:28:20.681] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:28:20.706] data.LB_FadeInType0=100 [2025-09-24 06:28:20.706] data.CHLH_FadeInType0=0 [2025-09-24 06:28:20.706] data.WU_FadeInDelay=0 [2025-09-24 06:28:20.706] max_time_out=0 [2025-09-24 06:28:20.706] No splash screen [2025-09-24 06:28:20.706] stop dss Done [2025-09-24 06:28:20.801] /dev/mem opened. [2025-09-24 06:28:20.801] Memory mapped at address 0xffff996de000. [2025-09-24 06:28:20.801] Read at address 0x00600018 (0xffff996de018): 0x00000000 [2025-09-24 06:28:20.801] Write at address 0x00600018 (0xffff996de018): 0x00400040, readback 0x00400040 [2025-09-24 06:28:20.801] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:28:20.801] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:28:20.865] Loaded PowerVR consumer services. [2025-09-24 06:28:21.057] Waiting data available... [2025-09-24 06:28:21.073] 512+0 records in [2025-09-24 06:28:21.073] 512+0 records out [2025-09-24 06:28:21.121] Starting syslogd/klogd: done [2025-09-24 06:28:21.121] DML Start [2025-09-24 06:28:21.313] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:28:21.568] DML res1: 0 [2025-09-24 06:28:21.936] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:28:21.957] Read Success [2025-09-24 06:28:21.957] Verifying certificate... [2025-09-24 06:28:22.245] Verified OK [2025-09-24 06:28:22.261] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:28:23.865] Verified OK [2025-09-24 06:28:23.865] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:28:24.409] Verified OK [2025-09-24 06:28:24.409] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:28:26.936] fs.protected_hardlinks = 1 [2025-09-24 06:28:26.936] fs.protected_symlinks = 1 [2025-09-24 06:28:26.952] kernel.modules_disabled = 1 [2025-09-24 06:28:27.144] [2025-09-24 06:28:27.144] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:28:28.628] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:28:36.335] SBL1:1210.0.1.0 [2025-09-24 06:28:36.367] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:28:37.950] SBL2:1210.0.1.0 [2025-09-24 06:28:37.982] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:28:38.095] j-A [2025-09-24 06:28:45.469] The R5 Autosar Classic is running [2025-09-24 06:28:45.469] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:28:45.469] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:28:46.077] INIT: version 2.96 booting [2025-09-24 06:28:46.188] INIT: Entering runlevel: 5 [2025-09-24 06:28:46.332] mtd28 attached [2025-09-24 06:28:46.348] mtd24 attached [2025-09-24 06:28:46.364] mtd32 attached [2025-09-24 06:28:46.467] RTNETLINK answers: File exists [2025-09-24 06:28:46.467] ubi0:animations is mounted. [2025-09-24 06:28:46.467] ubi2:dml_code is mounted. [2025-09-24 06:28:46.467] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:28:46.467] ubi1:textures is mounted. [2025-09-24 06:28:46.467] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:28:46.467] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:28:46.467] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:28:46.467] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:28:46.467] data.LB_FadeInType0=100 [2025-09-24 06:28:46.467] data.CHLH_FadeInType0=0 [2025-09-24 06:28:46.467] data.WU_FadeInDelay=0 [2025-09-24 06:28:46.467] max_time_out=0 [2025-09-24 06:28:46.467] No splash screen [2025-09-24 06:28:46.467] stop dss Done [2025-09-24 06:28:46.499] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:28:46.548] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:28:46.548] /dev/mem opened. [2025-09-24 06:28:46.548] Memory mapped at address 0xffffacd3e000. [2025-09-24 06:28:46.548] Read at address 0x00600018 (0xffffacd3e018): 0x00000000 [2025-09-24 06:28:46.548] Write at address 0x00600018 (0xffffacd3e018): 0x00400040, readback 0x00400040 [2025-09-24 06:28:46.803] Waiting data available... [2025-09-24 06:28:46.819] Loaded PowerVR consumer services. [2025-09-24 06:28:46.852] 512+0 records in [2025-09-24 06:28:46.852] 512+0 records out [2025-09-24 06:28:46.884] Starting syslogd/klogd: done [2025-09-24 06:28:46.900] DML Start [2025-09-24 06:28:47.107] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:28:47.331] DML res1: 0 [2025-09-24 06:28:47.699] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:28:47.720] Read Success [2025-09-24 06:28:47.720] Verifying certificate... [2025-09-24 06:28:47.976] Verified OK [2025-09-24 06:28:47.992] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:28:49.575] Verified OK [2025-09-24 06:28:49.575] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:28:50.188] Verified OK [2025-09-24 06:28:50.188] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:28:52.889] fs.protected_hardlinks = 1 [2025-09-24 06:28:52.889] fs.protected_symlinks = 1 [2025-09-24 06:28:52.905] kernel.modules_disabled = 1 [2025-09-24 06:28:53.098] [2025-09-24 06:28:53.098] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:28:54.407] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:29:02.136] SBL1:1210.0.1.0 [2025-09-24 06:29:02.184] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:29:03.751] SBL2:1210.0.1.0 [2025-09-24 06:29:03.799] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:29:03.894] j-A [2025-09-24 06:29:11.251] The R5 Autosar Classic is running [2025-09-24 06:29:11.274] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:29:11.274] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:29:11.882] INIT: version 2.96 booting [2025-09-24 06:29:11.993] INIT: Entering runlevel: 5 [2025-09-24 06:29:12.136] mtd24 attached [2025-09-24 06:29:12.153] mtd28 attached [2025-09-24 06:29:12.169] mtd32 attached [2025-09-24 06:29:12.185] ubi0:textures is mounted. [2025-09-24 06:29:12.217] RTNETLINK answers: File exists [2025-09-24 06:29:12.217] ubi1:animations is mounted. [2025-09-24 06:29:12.277] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:29:12.277] ubi2:dml_code is mounted. [2025-09-24 06:29:12.277] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:29:12.277] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:29:12.277] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:29:12.277] data.LB_FadeInType0=100 [2025-09-24 06:29:12.277] data.CHLH_FadeInType0=0 [2025-09-24 06:29:12.277] data.WU_FadeInDelay=0 [2025-09-24 06:29:12.277] max_time_out=0 [2025-09-24 06:29:12.277] No splash screen [2025-09-24 06:29:12.277] stop dss Done [2025-09-24 06:29:12.277] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:29:12.309] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:29:12.347] /dev/mem opened. [2025-09-24 06:29:12.347] Memory mapped at address 0xffffae333000. [2025-09-24 06:29:12.347] Read at address 0x00600018 (0xffffae333018): 0x00000000 [2025-09-24 06:29:12.347] Write at address 0x00600018 (0xffffae333018): 0x00400040, readback 0x00400040 [2025-09-24 06:29:12.347] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:29:12.426] Loaded PowerVR consumer services. [2025-09-24 06:29:12.619] Waiting data available... [2025-09-24 06:29:12.634] 512+0 records in [2025-09-24 06:29:12.634] 512+0 records out [2025-09-24 06:29:12.683] Starting syslogd/klogd: done [2025-09-24 06:29:12.699] DML Start [2025-09-24 06:29:12.874] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:29:13.130] DML res1: 0 [2025-09-24 06:29:13.535] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:29:13.535] Read Success [2025-09-24 06:29:13.535] Verifying certificate... [2025-09-24 06:29:13.774] Verified OK [2025-09-24 06:29:13.790] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:29:15.476] Verified OK [2025-09-24 06:29:15.476] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:29:16.076] Verified OK [2025-09-24 06:29:16.076] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:29:18.603] fs.protected_hardlinks = 1 [2025-09-24 06:29:18.619] fs.protected_symlinks = 1 [2025-09-24 06:29:18.619] kernel.modules_disabled = 1 [2025-09-24 06:29:18.827] [2025-09-24 06:29:18.827] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:29:20.187] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:29:27.946] SBL1:1210.0.1.0 [2025-09-24 06:29:27.978] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:29:29.561] SBL2:1210.0.1.0 [2025-09-24 06:29:29.593] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:29:29.705] j-A [2025-09-24 06:29:37.080] The R5 Autosar Classic is running [2025-09-24 06:29:37.080] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:29:37.080] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:29:37.687] INIT: version 2.96 booting [2025-09-24 06:29:37.800] INIT: Entering runlevel: 5 [2025-09-24 06:29:37.960] mtd32 attached [2025-09-24 06:29:37.960] mtd28 attached [2025-09-24 06:29:37.960] mtd24 attached [2025-09-24 06:29:38.024] RTNETLINK answers: File exists [2025-09-24 06:29:38.024] ubi0:dml_code is mounted. [2025-09-24 06:29:38.040] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:29:38.040] ubi2:textures is mounted. [2025-09-24 06:29:38.095] ubi1:animations is mounted. [2025-09-24 06:29:38.095] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:29:38.095] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:29:38.095] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:29:38.095] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:29:38.095] data.LB_FadeInType0=100 [2025-09-24 06:29:38.095] data.CHLH_FadeInType0=0 [2025-09-24 06:29:38.095] data.WU_FadeInDelay=0 [2025-09-24 06:29:38.095] max_time_out=0 [2025-09-24 06:29:38.095] No splash screen [2025-09-24 06:29:38.095] stop dss Done [2025-09-24 06:29:38.143] /dev/mem opened. [2025-09-24 06:29:38.143] Memory mapped at address 0xffffb1013000. [2025-09-24 06:29:38.169] Read at address 0x00600018 (0xffffb1013018): 0x00000000 [2025-09-24 06:29:38.169] Write at address 0x00600018 (0xffffb1013018): 0x00400040, readback 0x00400040 [2025-09-24 06:29:38.169] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:29:38.185] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:29:38.361] Loaded PowerVR consumer services. [2025-09-24 06:29:38.441] Waiting data available... [2025-09-24 06:29:38.473] 512+0 records in [2025-09-24 06:29:38.473] 512+0 records out [2025-09-24 06:29:38.505] Starting syslogd/klogd: done [2025-09-24 06:29:38.522] DML Start [2025-09-24 06:29:38.681] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:29:38.905] DML res1: 0 [2025-09-24 06:29:39.366] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:29:39.366] Read Success [2025-09-24 06:29:39.366] Verifying certificate... [2025-09-24 06:29:39.590] Verified OK [2025-09-24 06:29:39.606] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:29:41.252] Verified OK [2025-09-24 06:29:41.252] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:29:41.902] Verified OK [2025-09-24 06:29:41.902] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:29:44.508] fs.protected_hardlinks = 1 [2025-09-24 06:29:44.524] fs.protected_symlinks = 1 [2025-09-24 06:29:44.524] kernel.modules_disabled = 1 [2025-09-24 06:29:44.716] [2025-09-24 06:29:44.716] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:29:45.975] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:29:53.749] SBL1:1210.0.1.0 [2025-09-24 06:29:53.797] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:29:55.364] SBL2:1210.0.1.0 [2025-09-24 06:29:55.412] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:29:55.508] j-A [2025-09-24 06:30:02.864] The R5 Autosar Classic is running [2025-09-24 06:30:02.885] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:30:02.885] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:30:03.493] INIT: version 2.96 booting [2025-09-24 06:30:03.606] INIT: Entering runlevel: 5 [2025-09-24 06:30:03.749] mtd24 attached [2025-09-24 06:30:03.765] mtd28 attached [2025-09-24 06:30:03.781] mtd32 attached [2025-09-24 06:30:03.829] RTNETLINK answers: File exists [2025-09-24 06:30:03.829] ubi1:animations is mounted. [2025-09-24 06:30:03.885] ubi0:textures is mounted. [2025-09-24 06:30:03.885] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:30:03.885] ubi2:dml_code is mounted. [2025-09-24 06:30:03.885] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:30:03.885] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:30:03.885] data.LB_FadeInType0=100 [2025-09-24 06:30:03.885] data.CHLH_FadeInType0=0 [2025-09-24 06:30:03.885] data.WU_FadeInDelay=0 [2025-09-24 06:30:03.885] max_time_out=0 [2025-09-24 06:30:03.885] No splash screen [2025-09-24 06:30:03.885] stop dss Done [2025-09-24 06:30:03.885] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:30:03.885] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:30:03.953] /dev/mem opened. [2025-09-24 06:30:03.953] Memory mapped at address 0xffff84989000. [2025-09-24 06:30:03.953] Read at address 0x00600018 (0xffff84989018): 0x00000000 [2025-09-24 06:30:03.953] Write at address 0x00600018 (0xffff84989018): 0x00400040, readback 0x00400040 [2025-09-24 06:30:03.984] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:30:04.000] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:30:04.144] Loaded PowerVR consumer services. [2025-09-24 06:30:04.240] Waiting data available... [2025-09-24 06:30:04.256] 512+0 records in [2025-09-24 06:30:04.256] 512+0 records out [2025-09-24 06:30:04.304] Starting syslogd/klogd: done [2025-09-24 06:30:04.320] DML Start [2025-09-24 06:30:04.464] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:30:04.688] DML res1: 0 [2025-09-24 06:30:05.183] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:30:05.199] Read Success [2025-09-24 06:30:05.199] Verifying certificate... [2025-09-24 06:30:05.423] Verified OK [2025-09-24 06:30:05.439] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:30:07.273] Verified OK [2025-09-24 06:30:07.273] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:30:07.720] Verified OK [2025-09-24 06:30:07.720] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:30:10.086] fs.protected_hardlinks = 1 [2025-09-24 06:30:10.086] fs.protected_symlinks = 1 [2025-09-24 06:30:10.102] kernel.modules_disabled = 1 [2025-09-24 06:30:10.294] [2025-09-24 06:30:10.294] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:30:11.732] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:30:19.561] SBL1:1210.0.1.0 [2025-09-24 06:30:19.593] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:30:21.175] SBL2:1210.0.1.0 [2025-09-24 06:30:21.223] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:30:21.319] j-A [2025-09-24 06:30:28.675] The R5 Autosar Classic is running [2025-09-24 06:30:28.675] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:30:28.696] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:30:29.304] INIT: version 2.96 booting [2025-09-24 06:30:29.415] INIT: Entering runlevel: 5 [2025-09-24 06:30:29.576] mtd32 attached [2025-09-24 06:30:29.576] mtd28 attached [2025-09-24 06:30:29.592] mtd24 attached [2025-09-24 06:30:29.676] RTNETLINK answers: File exists [2025-09-24 06:30:29.676] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:30:29.676] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:30:29.676] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:30:29.676] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:30:29.676] ubi0:dml_code is mounted. [2025-09-24 06:30:29.676] ubi2:textures is mounted. [2025-09-24 06:30:29.676] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:30:29.676] ubi1:animations is mounted. [2025-09-24 06:30:29.692] data.LB_FadeInType0=100 [2025-09-24 06:30:29.729] data.CHLH_FadeInType0=0 [2025-09-24 06:30:29.729] data.WU_FadeInDelay=0 [2025-09-24 06:30:29.729] max_time_out=0 [2025-09-24 06:30:29.729] No splash screen [2025-09-24 06:30:29.729] stop dss Done [2025-09-24 06:30:29.729] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:30:29.729] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:30:29.785] /dev/mem opened. [2025-09-24 06:30:29.785] Memory mapped at address 0xffffacdd8000. [2025-09-24 06:30:29.785] Read at address 0x00600018 (0xffffacdd8018): 0x00000000 [2025-09-24 06:30:29.785] Write at address 0x00600018 (0xffffacdd8018): 0x00400040, readback 0x00400040 [2025-09-24 06:30:29.897] Loaded PowerVR consumer services. [2025-09-24 06:30:30.040] Waiting data available... [2025-09-24 06:30:30.056] 512+0 records in [2025-09-24 06:30:30.056] 512+0 records out [2025-09-24 06:30:30.120] Starting syslogd/klogd: done [2025-09-24 06:30:30.120] DML Start [2025-09-24 06:30:30.296] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:30:30.536] DML res1: 0 [2025-09-24 06:30:30.942] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:30:30.942] Read Success [2025-09-24 06:30:30.942] Verifying certificate... [2025-09-24 06:30:31.165] Verified OK [2025-09-24 06:30:31.182] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:30:32.857] Verified OK [2025-09-24 06:30:32.857] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:30:33.480] Verified OK [2025-09-24 06:30:33.496] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:30:36.182] fs.protected_hardlinks = 1 [2025-09-24 06:30:36.182] fs.protected_symlinks = 1 [2025-09-24 06:30:36.182] kernel.modules_disabled = 1 [2025-09-24 06:30:36.373] [2025-09-24 06:30:36.373] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:30:37.632] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:30:45.368] SBL1:1210.0.1.0 [2025-09-24 06:30:45.400] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:30:46.983] SBL2:1210.0.1.0 [2025-09-24 06:30:47.015] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:30:47.126] j-A [2025-09-24 06:30:54.501] The R5 Autosar Classic is running [2025-09-24 06:30:54.501] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:30:54.501] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:30:55.108] INIT: version 2.96 booting [2025-09-24 06:30:55.220] INIT: Entering runlevel: 5 [2025-09-24 06:30:55.379] mtd32 attached [2025-09-24 06:30:55.379] mtd24 attached [2025-09-24 06:30:55.395] mtd28 attached [2025-09-24 06:30:55.443] ubi0:dml_code is mounted. [2025-09-24 06:30:55.460] RTNETLINK answers: File exists [2025-09-24 06:30:55.460] ubi1:textures is mounted. [2025-09-24 06:30:55.481] ubi2:animations is mounted. [2025-09-24 06:30:55.481] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:30:55.481] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:30:55.514] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:30:55.514] data.LB_FadeInType0=100 [2025-09-24 06:30:55.514] data.CHLH_FadeInType0=0 [2025-09-24 06:30:55.514] data.WU_FadeInDelay=0 [2025-09-24 06:30:55.514] max_time_out=0 [2025-09-24 06:30:55.514] No splash screen [2025-09-24 06:30:55.514] stop dss Done [2025-09-24 06:30:55.514] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:30:55.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:30:55.576] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:30:55.576] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:30:55.576] /dev/mem opened. [2025-09-24 06:30:55.576] Memory mapped at address 0xffff892d6000. [2025-09-24 06:30:55.576] Read at address 0x00600018 (0xffff892d6018): 0x00000000 [2025-09-24 06:30:55.576] Write at address 0x00600018 (0xffff892d6018): 0x00400040, readback 0x00400040 [2025-09-24 06:30:55.784] Loaded PowerVR consumer services. [2025-09-24 06:30:55.880] Waiting data available... [2025-09-24 06:30:55.912] 512+0 records in [2025-09-24 06:30:55.912] 512+0 records out [2025-09-24 06:30:55.944] Starting syslogd/klogd: done [2025-09-24 06:30:55.960] DML Start [2025-09-24 06:30:56.104] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:30:56.345] DML res1: 0 [2025-09-24 06:30:56.839] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:30:56.839] Read Success [2025-09-24 06:30:56.839] Verifying certificate... [2025-09-24 06:30:57.079] Verified OK [2025-09-24 06:30:57.094] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:30:58.598] Verified OK [2025-09-24 06:30:58.598] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:30:59.201] Verified OK [2025-09-24 06:30:59.201] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:31:01.951] fs.protected_hardlinks = 1 [2025-09-24 06:31:01.951] fs.protected_symlinks = 1 [2025-09-24 06:31:01.967] kernel.modules_disabled = 1 [2025-09-24 06:31:02.159] [2025-09-24 06:31:02.159] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:31:03.388] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:31:11.176] SBL1:1210.0.1.0 [2025-09-24 06:31:11.208] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:31:12.790] SBL2:1210.0.1.0 [2025-09-24 06:31:12.838] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:31:12.935] j-A [2025-09-24 06:31:20.289] The R5 Autosar Classic is running [2025-09-24 06:31:20.311] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:31:20.311] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:31:20.919] INIT: version 2.96 booting [2025-09-24 06:31:21.030] INIT: Entering runlevel: 5 [2025-09-24 06:31:21.175] mtd24 attached [2025-09-24 06:31:21.191] mtd28 attached [2025-09-24 06:31:21.207] mtd32 attached [2025-09-24 06:31:21.310] ubi0:textures is mounted. [2025-09-24 06:31:21.310] RTNETLINK answers: File exists [2025-09-24 06:31:21.310] ubi1:animations is mounted. [2025-09-24 06:31:21.310] ubi2:dml_code is mounted. [2025-09-24 06:31:21.310] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:31:21.310] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:31:21.310] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:31:21.310] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:31:21.310] data.LB_FadeInType0=100 [2025-09-24 06:31:21.310] data.CHLH_FadeInType0=0 [2025-09-24 06:31:21.310] data.WU_FadeInDelay=0 [2025-09-24 06:31:21.310] max_time_out=0 [2025-09-24 06:31:21.310] No splash screen [2025-09-24 06:31:21.310] stop dss Done [2025-09-24 06:31:21.310] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:31:21.342] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:31:21.396] /dev/mem opened. [2025-09-24 06:31:21.396] Memory mapped at address 0xffffa3e86000. [2025-09-24 06:31:21.396] Read at address 0x00600018 (0xffffa3e86018): 0x00000000 [2025-09-24 06:31:21.396] Write at address 0x00600018 (0xffffa3e86018): 0x00400040, readback 0x00400040 [2025-09-24 06:31:21.396] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:31:21.475] Loaded PowerVR consumer services. [2025-09-24 06:31:21.651] Waiting data available... [2025-09-24 06:31:21.684] 512+0 records in [2025-09-24 06:31:21.684] 512+0 records out [2025-09-24 06:31:21.716] Starting syslogd/klogd: done [2025-09-24 06:31:21.732] DML Start [2025-09-24 06:31:21.907] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:31:22.147] DML res1: 0 [2025-09-24 06:31:22.591] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:31:22.591] Read Success [2025-09-24 06:31:22.591] Verifying certificate... [2025-09-24 06:31:22.863] Verified OK [2025-09-24 06:31:22.879] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:31:24.645] Verified OK [2025-09-24 06:31:24.645] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:31:25.125] Verified OK [2025-09-24 06:31:25.141] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:31:27.684] fs.protected_hardlinks = 1 [2025-09-24 06:31:27.684] fs.protected_symlinks = 1 [2025-09-24 06:31:27.699] kernel.modules_disabled = 1 [2025-09-24 06:31:27.891] [2025-09-24 06:31:27.891] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:31:29.170] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:31:36.950] SBL1:1210.0.1.0 [2025-09-24 06:31:36.998] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:31:38.565] SBL2:1210.0.1.0 [2025-09-24 06:31:38.613] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:31:38.726] j-A [2025-09-24 06:31:46.097] The R5 Autosar Classic is running [2025-09-24 06:31:46.097] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:31:46.097] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:31:46.704] INIT: version 2.96 booting [2025-09-24 06:31:46.816] INIT: Entering runlevel: 5 [2025-09-24 06:31:46.959] mtd24 attached [2025-09-24 06:31:46.975] mtd28 attached [2025-09-24 06:31:46.992] mtd32 attached [2025-09-24 06:31:47.071] RTNETLINK answers: File exists [2025-09-24 06:31:47.071] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:31:47.071] ubi0:textures is mounted. [2025-09-24 06:31:47.071] ubi2:dml_code is mounted. [2025-09-24 06:31:47.071] ubi1:animations is mounted. [2025-09-24 06:31:47.071] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:31:47.071] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:31:47.071] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:31:47.071] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:31:47.094] data.LB_FadeInType0=100 [2025-09-24 06:31:47.094] data.CHLH_FadeInType0=0 [2025-09-24 06:31:47.094] data.WU_FadeInDelay=0 [2025-09-24 06:31:47.094] max_time_out=0 [2025-09-24 06:31:47.094] No splash screen [2025-09-24 06:31:47.094] stop dss Done [2025-09-24 06:31:47.172] /dev/mem opened. [2025-09-24 06:31:47.172] Memory mapped at address 0xffff953cc000. [2025-09-24 06:31:47.172] Read at address 0x00600018 (0xffff953cc018): 0x00000000 [2025-09-24 06:31:47.172] Write at address 0x00600018 (0xffff953cc018): 0x00400040, readback 0x00400040 [2025-09-24 06:31:47.172] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:31:47.172] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:31:47.363] Loaded PowerVR consumer services. [2025-09-24 06:31:47.459] Waiting data available... [2025-09-24 06:31:47.491] 512+0 records in [2025-09-24 06:31:47.491] 512+0 records out [2025-09-24 06:31:47.523] Starting syslogd/klogd: done [2025-09-24 06:31:47.539] DML Start [2025-09-24 06:31:47.715] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:31:47.875] DML res1: 0 [2025-09-24 06:31:48.444] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:31:48.444] Read Success [2025-09-24 06:31:48.444] Verifying certificate... [2025-09-24 06:31:48.683] Verified OK [2025-09-24 06:31:48.699] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:31:50.264] Verified OK [2025-09-24 06:31:50.264] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:31:50.892] Verified OK [2025-09-24 06:31:50.892] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:31:53.499] fs.protected_hardlinks = 1 [2025-09-24 06:31:53.515] fs.protected_symlinks = 1 [2025-09-24 06:31:53.515] kernel.modules_disabled = 1 [2025-09-24 06:31:53.707] [2025-09-24 06:31:53.707] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:31:54.948] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:32:02.743] SBL1:1210.0.1.0 [2025-09-24 06:32:02.791] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:32:04.357] SBL2:1210.0.1.0 [2025-09-24 06:32:04.405] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:32:04.517] j-A [2025-09-24 06:32:11.888] The R5 Autosar Classic is running [2025-09-24 06:32:11.888] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:32:11.888] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:32:12.496] INIT: version 2.96 booting [2025-09-24 06:32:12.608] INIT: Entering runlevel: 5 [2025-09-24 06:32:12.752] mtd24 attached [2025-09-24 06:32:12.768] mtd28 attached [2025-09-24 06:32:12.784] mtd32 attached [2025-09-24 06:32:12.831] RTNETLINK answers: File exists [2025-09-24 06:32:12.831] ubi0:textures is mounted. [2025-09-24 06:32:12.891] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:32:12.891] ubi1:animations is mounted. [2025-09-24 06:32:12.891] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:32:12.891] ubi2:dml_code is mounted. [2025-09-24 06:32:12.891] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:32:12.891] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:32:12.891] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:32:12.891] data.LB_FadeInType0=100 [2025-09-24 06:32:12.891] data.CHLH_FadeInType0=0 [2025-09-24 06:32:12.891] data.WU_FadeInDelay=0 [2025-09-24 06:32:12.891] max_time_out=0 [2025-09-24 06:32:12.891] No splash screen [2025-09-24 06:32:12.891] stop dss Done [2025-09-24 06:32:12.932] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:32:12.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:32:12.948] /dev/mem opened. [2025-09-24 06:32:12.948] Memory mapped at address 0xffffa86f9000. [2025-09-24 06:32:12.974] Read at address 0x00600018 (0xffffa86f9018): 0x00000000 [2025-09-24 06:32:12.974] Write at address 0x00600018 (0xffffa86f9018): 0x00400040, readback 0x00400040 [2025-09-24 06:32:13.087] Loaded PowerVR consumer services. [2025-09-24 06:32:13.246] Waiting data available... [2025-09-24 06:32:13.262] 512+0 records in [2025-09-24 06:32:13.262] 512+0 records out [2025-09-24 06:32:13.294] Starting syslogd/klogd: done [2025-09-24 06:32:13.310] DML Start [2025-09-24 06:32:13.534] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:32:13.726] DML res1: 0 [2025-09-24 06:32:14.107] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:32:14.107] Read Success [2025-09-24 06:32:14.107] Verifying certificate... [2025-09-24 06:32:14.346] Verified OK [2025-09-24 06:32:14.362] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:32:15.893] Verified OK [2025-09-24 06:32:15.893] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:32:16.478] Verified OK [2025-09-24 06:32:16.478] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:32:19.356] fs.protected_hardlinks = 1 [2025-09-24 06:32:19.356] fs.protected_symlinks = 1 [2025-09-24 06:32:19.356] kernel.modules_disabled = 1 [2025-09-24 06:32:19.547] [2025-09-24 06:32:19.547] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:32:20.811] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:32:23.108] "SBL1:1210.0.1.0 [2025-09-24 06:32:28.608] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:32:30.191] SBL2:1210.0.1.0 [2025-09-24 06:32:30.240] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:32:30.335] j-A [2025-09-24 06:32:37.690] The R5 Autosar Classic is running [2025-09-24 06:32:37.711] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:32:37.711] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:32:38.318] INIT: version 2.96 booting [2025-09-24 06:32:38.430] INIT: Entering runlevel: 5 [2025-09-24 06:32:38.591] mtd24 attached [2025-09-24 06:32:38.606] mtd32 attached [2025-09-24 06:32:38.606] mtd28 attached [2025-09-24 06:32:38.622] ubi0:textures is mounted. [2025-09-24 06:32:38.654] RTNETLINK answers: File exists [2025-09-24 06:32:38.707] ubi1:dml_code is mounted. [2025-09-24 06:32:38.707] ubi2:animations is mounted. [2025-09-24 06:32:38.707] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:32:38.707] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:32:38.707] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:32:38.707] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:32:38.707] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:32:38.707] data.LB_FadeInType0=100 [2025-09-24 06:32:38.707] data.CHLH_FadeInType0=0 [2025-09-24 06:32:38.707] data.WU_FadeInDelay=0 [2025-09-24 06:32:38.707] max_time_out=0 [2025-09-24 06:32:38.707] No splash screen [2025-09-24 06:32:38.707] stop dss Done [2025-09-24 06:32:38.755] /dev/mem opened. [2025-09-24 06:32:38.755] Memory mapped at address 0xffff82119000. [2025-09-24 06:32:38.787] Read at address 0x00600018 (0xffff82119018): 0x00000000 [2025-09-24 06:32:38.787] Write at address 0x00600018 (0xffff82119018): 0x00400040, readback 0x00400040 [2025-09-24 06:32:38.787] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:32:38.787] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:32:39.010] Loaded PowerVR consumer services. [2025-09-24 06:32:39.042] Waiting data available... [2025-09-24 06:32:39.075] 512+0 records in [2025-09-24 06:32:39.075] 512+0 records out [2025-09-24 06:32:39.123] Starting syslogd/klogd: done [2025-09-24 06:32:39.139] DML Start [2025-09-24 06:32:39.283] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:32:39.538] DML res1: 0 [2025-09-24 06:32:39.954] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:32:39.954] Read Success [2025-09-24 06:32:39.954] Verifying certificate... [2025-09-24 06:32:40.177] Verified OK [2025-09-24 06:32:40.193] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:32:41.951] Verified OK [2025-09-24 06:32:41.951] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:32:42.587] Verified OK [2025-09-24 06:32:42.587] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:32:45.097] fs.protected_hardlinks = 1 [2025-09-24 06:32:45.097] fs.protected_symlinks = 1 [2025-09-24 06:32:45.113] kernel.modules_disabled = 1 [2025-09-24 06:32:45.320] [2025-09-24 06:32:45.320] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:32:46.615] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:32:54.393] SBL1:1210.0.1.0 [2025-09-24 06:32:54.425] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:32:56.008] SBL2:1210.0.1.0 [2025-09-24 06:32:56.040] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:32:56.151] j-A [2025-09-24 06:33:03.525] The R5 Autosar Classic is running [2025-09-24 06:33:03.525] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:33:03.525] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:33:04.132] INIT: version 2.96 booting [2025-09-24 06:33:04.243] INIT: Entering runlevel: 5 [2025-09-24 06:33:04.404] mtd28 attached [2025-09-24 06:33:04.404] mtd24 attached [2025-09-24 06:33:04.420] mtd32 attached [2025-09-24 06:33:04.483] ubi0:animations is mounted. [2025-09-24 06:33:04.483] ubi1:textures is mounted. [2025-09-24 06:33:04.483] RTNETLINK answers: File exists [2025-09-24 06:33:04.483] ubi2:dml_code is mounted. [2025-09-24 06:33:04.483] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:33:04.530] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:33:04.530] data.LB_FadeInType0=100 [2025-09-24 06:33:04.530] data.CHLH_FadeInType0=0 [2025-09-24 06:33:04.530] data.WU_FadeInDelay=0 [2025-09-24 06:33:04.530] max_time_out=0 [2025-09-24 06:33:04.530] No splash screen [2025-09-24 06:33:04.530] stop dss Done [2025-09-24 06:33:04.530] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:33:04.530] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:33:04.530] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:33:04.602] /dev/mem opened. [2025-09-24 06:33:04.602] Memory mapped at address 0xffffa09f8000. [2025-09-24 06:33:04.602] Read at address 0x00600018 (0xffffa09f8018): 0x00000000 [2025-09-24 06:33:04.602] Write at address 0x00600018 (0xffffa09f8018): 0x00400040, readback 0x00400040 [2025-09-24 06:33:04.618] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:33:04.634] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:33:04.794] Loaded PowerVR consumer services. [2025-09-24 06:33:04.906] Waiting data available... [2025-09-24 06:33:04.938] 512+0 records in [2025-09-24 06:33:04.938] 512+0 records out [2025-09-24 06:33:04.954] Starting syslogd/klogd: done [2025-09-24 06:33:04.970] DML Start [2025-09-24 06:33:05.114] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:33:05.370] DML res1: 0 [2025-09-24 06:33:05.794] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:33:05.794] Read Success [2025-09-24 06:33:05.794] Verifying certificate... [2025-09-24 06:33:06.017] Verified OK [2025-09-24 06:33:06.017] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:33:07.553] Verified OK [2025-09-24 06:33:07.553] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:33:08.173] Verified OK [2025-09-24 06:33:08.173] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:33:10.939] fs.protected_hardlinks = 1 [2025-09-24 06:33:10.939] fs.protected_symlinks = 1 [2025-09-24 06:33:10.955] kernel.modules_disabled = 1 [2025-09-24 06:33:11.162] [2025-09-24 06:33:11.162] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:33:12.494] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:33:20.178] SBL1:1210.0.1.0 [2025-09-24 06:33:20.226] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:33:21.792] SBL2:1210.0.1.0 [2025-09-24 06:33:21.840] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:33:21.953] j-A [2025-09-24 06:33:29.324] The R5 Autosar Classic is running [2025-09-24 06:33:29.324] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:33:29.324] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:33:29.932] INIT: version 2.96 booting [2025-09-24 06:33:30.044] INIT: Entering runlevel: 5 [2025-09-24 06:33:30.204] mtd28 attached [2025-09-24 06:33:30.204] mtd24 attached [2025-09-24 06:33:30.236] mtd32 attached [2025-09-24 06:33:30.252] ubi0:animations is mounted. [2025-09-24 06:33:30.268] RTNETLINK answers: File exists [2025-09-24 06:33:30.335] ubi1:textures is mounted. [2025-09-24 06:33:30.335] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:33:30.335] ubi2:dml_code is mounted. [2025-09-24 06:33:30.335] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:33:30.335] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:33:30.335] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:33:30.335] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:33:30.335] data.LB_FadeInType0=100 [2025-09-24 06:33:30.335] data.CHLH_FadeInType0=0 [2025-09-24 06:33:30.335] data.WU_FadeInDelay=0 [2025-09-24 06:33:30.335] max_time_out=0 [2025-09-24 06:33:30.335] No splash screen [2025-09-24 06:33:30.335] stop dss Done [2025-09-24 06:33:30.420] /dev/mem opened. [2025-09-24 06:33:30.420] Memory mapped at address 0xffff8e7da000. [2025-09-24 06:33:30.420] Read at address 0x00600018 (0xffff8e7da018): 0x00000000 [2025-09-24 06:33:30.420] Write at address 0x00600018 (0xffff8e7da018): 0x00400040, readback 0x00400040 [2025-09-24 06:33:30.451] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:33:30.451] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:33:30.642] Loaded PowerVR consumer services. [2025-09-24 06:33:30.735] Waiting data available... [2025-09-24 06:33:30.735] 512+0 records in [2025-09-24 06:33:30.735] 512+0 records out [2025-09-24 06:33:30.751] Starting syslogd/klogd: done [2025-09-24 06:33:30.767] DML Start [2025-09-24 06:33:30.958] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:33:31.167] DML res1: 0 [2025-09-24 06:33:31.592] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:33:31.592] Read Success [2025-09-24 06:33:31.592] Verifying certificate... [2025-09-24 06:33:31.832] Verified OK [2025-09-24 06:33:31.832] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:33:33.485] Verified OK [2025-09-24 06:33:33.485] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:33:34.137] Verified OK [2025-09-24 06:33:34.137] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:33:36.807] fs.protected_hardlinks = 1 [2025-09-24 06:33:36.807] fs.protected_symlinks = 1 [2025-09-24 06:33:36.823] kernel.modules_disabled = 1 [2025-09-24 06:33:36.999] [2025-09-24 06:33:36.999] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:33:38.198] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:33:45.998] SBL1:1210.0.1.0 [2025-09-24 06:33:46.046] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:33:47.613] SBL2:1210.0.1.0 [2025-09-24 06:33:47.661] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:33:47.772] j-A [2025-09-24 06:33:55.113] The R5 Autosar Classic is running [2025-09-24 06:33:55.138] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:33:55.138] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:33:55.745] INIT: version 2.96 booting [2025-09-24 06:33:55.857] INIT: Entering runlevel: 5 [2025-09-24 06:33:56.017] mtd24 attached [2025-09-24 06:33:56.017] mtd28 attached [2025-09-24 06:33:56.049] mtd32 attached [2025-09-24 06:33:56.065] ubi0:textures is mounted. [2025-09-24 06:33:56.081] ubi1:animations is mounted. [2025-09-24 06:33:56.081] RTNETLINK answers: File exists [2025-09-24 06:33:56.142] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:33:56.142] ubi2:dml_code is mounted. [2025-09-24 06:33:56.142] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:33:56.142] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:33:56.142] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:33:56.142] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:33:56.142] data.LB_FadeInType0=100 [2025-09-24 06:33:56.142] data.CHLH_FadeInType0=0 [2025-09-24 06:33:56.142] data.WU_FadeInDelay=0 [2025-09-24 06:33:56.142] max_time_out=0 [2025-09-24 06:33:56.142] No splash screen [2025-09-24 06:33:56.142] stop dss Done [2025-09-24 06:33:56.232] /dev/mem opened. [2025-09-24 06:33:56.232] Memory mapped at address 0xffffb7614000. [2025-09-24 06:33:56.232] Read at address 0x00600018 (0xffffb7614018): 0x00000000 [2025-09-24 06:33:56.232] Write at address 0x00600018 (0xffffb7614018): 0x00400040, readback 0x00400040 [2025-09-24 06:33:56.232] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:33:56.232] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:33:56.488] Loaded PowerVR consumer services. [2025-09-24 06:33:56.504] Waiting data available... [2025-09-24 06:33:56.536] 512+0 records in [2025-09-24 06:33:56.536] 512+0 records out [2025-09-24 06:33:56.584] Starting syslogd/klogd: done [2025-09-24 06:33:56.600] DML Start [2025-09-24 06:33:56.759] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:33:56.967] DML res1: 0 [2025-09-24 06:33:57.463] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:33:57.484] Read Success [2025-09-24 06:33:57.484] Verifying certificate... [2025-09-24 06:33:57.708] Verified OK [2025-09-24 06:33:57.740] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:33:59.370] Verified OK [2025-09-24 06:33:59.370] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:34:00.036] Verified OK [2025-09-24 06:34:00.036] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:34:02.658] fs.protected_hardlinks = 1 [2025-09-24 06:34:02.658] fs.protected_symlinks = 1 [2025-09-24 06:34:02.674] kernel.modules_disabled = 1 [2025-09-24 06:34:02.882] [2025-09-24 06:34:02.882] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:34:04.009] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:34:11.800] SBL1:1210.0.1.0 [2025-09-24 06:34:11.848] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:34:13.415] SBL2:1210.0.1.0 [2025-09-24 06:34:13.463] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:34:13.575] j-A [2025-09-24 06:34:20.915] The R5 Autosar Classic is running [2025-09-24 06:34:20.947] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:34:20.947] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:34:21.553] INIT: version 2.96 booting [2025-09-24 06:34:21.666] INIT: Entering runlevel: 5 [2025-09-24 06:34:21.809] mtd24 attached [2025-09-24 06:34:21.825] mtd32 attached [2025-09-24 06:34:21.857] ubi0:textures is mounted. [2025-09-24 06:34:21.874] ubi1:dml_code is mounted. [2025-09-24 06:34:21.874] mtd28 attached [2025-09-24 06:34:21.890] RTNETLINK answers: File exists [2025-09-24 06:34:21.932] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:34:21.932] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:34:21.932] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:34:21.932] ubi2:animations is mounted. [2025-09-24 06:34:21.932] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:34:21.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:34:21.932] data.LB_FadeInType0=100 [2025-09-24 06:34:21.953] data.CHLH_FadeInType0=0 [2025-09-24 06:34:21.953] data.WU_FadeInDelay=0 [2025-09-24 06:34:21.953] max_time_out=0 [2025-09-24 06:34:21.953] No splash screen [2025-09-24 06:34:21.953] stop dss Done [2025-09-24 06:34:21.985] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:34:22.039] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:34:22.039] /dev/mem opened. [2025-09-24 06:34:22.039] Memory mapped at address 0xffff9dece000. [2025-09-24 06:34:22.039] Read at address 0x00600018 (0xffff9dece018): 0x00000000 [2025-09-24 06:34:22.039] Write at address 0x00600018 (0xffff9dece018): 0x00400040, readback 0x00400040 [2025-09-24 06:34:22.264] Loaded PowerVR consumer services. [2025-09-24 06:34:22.280] Waiting data available... [2025-09-24 06:34:22.312] 512+0 records in [2025-09-24 06:34:22.312] 512+0 records out [2025-09-24 06:34:22.359] Starting syslogd/klogd: done [2025-09-24 06:34:22.375] DML Start [2025-09-24 06:34:22.519] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:34:22.727] DML res1: 0 [2025-09-24 06:34:23.159] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:34:23.186] Read Success [2025-09-24 06:34:23.186] Verifying certificate... [2025-09-24 06:34:23.442] Verified OK [2025-09-24 06:34:23.457] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:34:25.101] Verified OK [2025-09-24 06:34:25.101] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:34:25.740] Verified OK [2025-09-24 06:34:25.740] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:34:28.442] fs.protected_hardlinks = 1 [2025-09-24 06:34:28.458] fs.protected_symlinks = 1 [2025-09-24 06:34:28.458] kernel.modules_disabled = 1 [2025-09-24 06:34:28.650] [2025-09-24 06:34:28.650] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:34:29.849] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:34:37.604] SBL1:1210.0.1.0 [2025-09-24 06:34:37.652] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:34:39.218] SBL2:1210.0.1.0 [2025-09-24 06:34:39.266] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:34:39.378] j-A [2025-09-24 06:34:46.718] The R5 Autosar Classic is running [2025-09-24 06:34:46.749] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:34:46.749] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:34:47.357] INIT: version 2.96 booting [2025-09-24 06:34:47.469] INIT: Entering runlevel: 5 [2025-09-24 06:34:47.612] mtd24 attached [2025-09-24 06:34:47.628] mtd32 attached [2025-09-24 06:34:47.644] mtd28 attached [2025-09-24 06:34:47.661] ubi0:textures is mounted. [2025-09-24 06:34:47.746] RTNETLINK answers: File exists [2025-09-24 06:34:47.746] ubi1:dml_code is mounted. [2025-09-24 06:34:47.746] ubi2:animations is mounted. [2025-09-24 06:34:47.746] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:34:47.746] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:34:47.746] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:34:47.746] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:34:47.746] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:34:47.746] data.LB_FadeInType0=100 [2025-09-24 06:34:47.746] data.CHLH_FadeInType0=0 [2025-09-24 06:34:47.746] data.WU_FadeInDelay=0 [2025-09-24 06:34:47.746] max_time_out=0 [2025-09-24 06:34:47.746] No splash screen [2025-09-24 06:34:47.746] stop dss Done [2025-09-24 06:34:47.825] /dev/mem opened. [2025-09-24 06:34:47.825] Memory mapped at address 0xffff9de75000. [2025-09-24 06:34:47.825] Read at address 0x00600018 (0xffff9de75018): 0x00000000 [2025-09-24 06:34:47.825] Write at address 0x00600018 (0xffff9de75018): 0x00400040, readback 0x00400040 [2025-09-24 06:34:47.841] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:34:47.842] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:34:47.937] Loaded PowerVR consumer services. [2025-09-24 06:34:48.097] Waiting data available... [2025-09-24 06:34:48.113] 512+0 records in [2025-09-24 06:34:48.113] 512+0 records out [2025-09-24 06:34:48.145] Starting syslogd/klogd: done [2025-09-24 06:34:48.162] DML Start [2025-09-24 06:34:48.338] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:34:48.513] DML res1: 0 [2025-09-24 06:34:49.068] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:34:49.068] Read Success [2025-09-24 06:34:49.068] Verifying certificate... [2025-09-24 06:34:49.324] Verified OK [2025-09-24 06:34:49.340] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:34:50.955] Verified OK [2025-09-24 06:34:50.955] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:34:51.616] Verified OK [2025-09-24 06:34:51.616] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:34:54.221] fs.protected_hardlinks = 1 [2025-09-24 06:34:54.238] fs.protected_symlinks = 1 [2025-09-24 06:34:54.238] kernel.modules_disabled = 1 [2025-09-24 06:34:54.430] [2025-09-24 06:34:54.430] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:34:55.594] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:35:03.413] SBL1:1210.0.1.0 [2025-09-24 06:35:03.461] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:35:05.028] SBL2:1210.0.1.0 [2025-09-24 06:35:05.076] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:35:05.187] j-A [2025-09-24 06:35:12.560] The R5 Autosar Classic is running [2025-09-24 06:35:12.560] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:35:12.560] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:35:13.168] INIT: version 2.96 booting [2025-09-24 06:35:13.280] INIT: Entering runlevel: 5 [2025-09-24 06:35:13.424] mtd24 attached [2025-09-24 06:35:13.440] mtd28 attached [2025-09-24 06:35:13.456] mtd32 attached [2025-09-24 06:35:13.504] RTNETLINK answers: File exists [2025-09-24 06:35:13.565] ubi0:textures is mounted. [2025-09-24 06:35:13.565] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:35:13.565] ubi1:animations is mounted. [2025-09-24 06:35:13.565] ubi2:dml_code is mounted. [2025-09-24 06:35:13.565] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:35:13.565] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:35:13.565] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:35:13.565] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:35:13.565] data.LB_FadeInType0=100 [2025-09-24 06:35:13.565] data.CHLH_FadeInType0=0 [2025-09-24 06:35:13.565] data.WU_FadeInDelay=0 [2025-09-24 06:35:13.565] max_time_out=0 [2025-09-24 06:35:13.565] No splash screen [2025-09-24 06:35:13.565] stop dss Done [2025-09-24 06:35:13.582] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:35:13.597] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:35:13.635] /dev/mem opened. [2025-09-24 06:35:13.635] Memory mapped at address 0xffff96971000. [2025-09-24 06:35:13.635] Read at address 0x00600018 (0xffff96971018): 0x00000000 [2025-09-24 06:35:13.635] Write at address 0x00600018 (0xffff96971018): 0x00400040, readback 0x00400040 [2025-09-24 06:35:13.843] Loaded PowerVR consumer services. [2025-09-24 06:35:13.938] Waiting data available... [2025-09-24 06:35:13.954] 512+0 records in [2025-09-24 06:35:13.970] 512+0 records out [2025-09-24 06:35:13.987] Starting syslogd/klogd: done [2025-09-24 06:35:14.003] DML Start [2025-09-24 06:35:14.178] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:35:14.435] DML res1: 0 [2025-09-24 06:35:14.843] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:35:14.843] Read Success [2025-09-24 06:35:14.843] Verifying certificate... [2025-09-24 06:35:15.052] Verified OK [2025-09-24 06:35:15.067] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:35:16.744] Verified OK [2025-09-24 06:35:16.744] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:35:17.342] Verified OK [2025-09-24 06:35:17.342] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:35:19.917] fs.protected_hardlinks = 1 [2025-09-24 06:35:19.933] fs.protected_symlinks = 1 [2025-09-24 06:35:19.949] kernel.modules_disabled = 1 [2025-09-24 06:35:20.141] [2025-09-24 06:35:20.141] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:35:21.458] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:35:29.216] SBL1:1210.0.1.0 [2025-09-24 06:35:29.248] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:35:30.815] SBL2:1210.0.1.0 [2025-09-24 06:35:30.863] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:35:30.975] j-A [2025-09-24 06:35:38.347] The R5 Autosar Classic is running [2025-09-24 06:35:38.347] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:35:38.347] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:35:38.955] INIT: version 2.96 booting [2025-09-24 06:35:39.066] INIT: Entering runlevel: 5 [2025-09-24 06:35:39.211] mtd24 attached [2025-09-24 06:35:39.227] mtd28 attached [2025-09-24 06:35:39.243] mtd32 attached [2025-09-24 06:35:39.275] ubi0:textures is mounted. [2025-09-24 06:35:39.348] RTNETLINK answers: File exists [2025-09-24 06:35:39.348] ubi1:animations is mounted. [2025-09-24 06:35:39.348] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:35:39.348] ubi2:dml_code is mounted. [2025-09-24 06:35:39.348] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:35:39.348] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:35:39.348] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:35:39.348] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:35:39.348] data.LB_FadeInType0=100 [2025-09-24 06:35:39.348] data.CHLH_FadeInType0=0 [2025-09-24 06:35:39.348] data.WU_FadeInDelay=0 [2025-09-24 06:35:39.348] max_time_out=0 [2025-09-24 06:35:39.348] No splash screen [2025-09-24 06:35:39.348] stop dss Done [2025-09-24 06:35:39.426] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:35:39.426] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:35:39.426] /dev/mem opened. [2025-09-24 06:35:39.426] Memory mapped at address 0xffff994a1000. [2025-09-24 06:35:39.426] Read at address 0x00600018 (0xffff994a1018): 0x00000000 [2025-09-24 06:35:39.426] Write at address 0x00600018 (0xffff994a1018): 0x00400040, readback 0x00400040 [2025-09-24 06:35:39.571] Loaded PowerVR consumer services. [2025-09-24 06:35:39.682] Waiting data available... [2025-09-24 06:35:39.698] 512+0 records in [2025-09-24 06:35:39.698] 512+0 records out [2025-09-24 06:35:39.746] Starting syslogd/klogd: done [2025-09-24 06:35:39.762] DML Start [2025-09-24 06:35:39.938] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:35:40.162] DML res1: 0 [2025-09-24 06:35:40.610] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:35:40.631] Read Success [2025-09-24 06:35:40.631] Verifying certificate... [2025-09-24 06:35:40.855] Verified OK [2025-09-24 06:35:40.871] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:35:42.502] Verified OK [2025-09-24 06:35:42.502] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:35:43.124] Verified OK [2025-09-24 06:35:43.124] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:35:45.824] fs.protected_hardlinks = 1 [2025-09-24 06:35:45.824] fs.protected_symlinks = 1 [2025-09-24 06:35:45.824] kernel.modules_disabled = 1 [2025-09-24 06:35:46.000] [2025-09-24 06:35:46.000] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:35:47.188] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:35:55.024] SBL1:1210.0.1.0 [2025-09-24 06:35:55.056] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:35:56.640] SBL2:1210.0.1.0 [2025-09-24 06:35:56.671] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:35:56.783] j-A [2025-09-24 06:36:04.159] The R5 Autosar Classic is running [2025-09-24 06:36:04.159] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:36:04.159] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:36:04.767] INIT: version 2.96 booting [2025-09-24 06:36:04.878] INIT: Entering runlevel: 5 [2025-09-24 06:36:05.023] mtd32 attached [2025-09-24 06:36:05.039] mtd28 attached [2025-09-24 06:36:05.039] mtd24 attached [2025-09-24 06:36:05.102] ubi0:dml_code is mounted. [2025-09-24 06:36:05.102] RTNETLINK answers: File exists [2025-09-24 06:36:05.157] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:36:05.157] ubi1:animations is mounted. [2025-09-24 06:36:05.157] ubi2:textures is mounted. [2025-09-24 06:36:05.157] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:36:05.157] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:36:05.157] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:36:05.157] data.LB_FadeInType0=100 [2025-09-24 06:36:05.157] data.CHLH_FadeInType0=0 [2025-09-24 06:36:05.157] data.WU_FadeInDelay=0 [2025-09-24 06:36:05.157] max_time_out=0 [2025-09-24 06:36:05.157] No splash screen [2025-09-24 06:36:05.157] stop dss Done [2025-09-24 06:36:05.157] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:36:05.189] /dev/mem opened. [2025-09-24 06:36:05.189] Memory mapped at address 0xffff9a5c6000. [2025-09-24 06:36:05.215] Read at address 0x00600018 (0xffff9a5c6018): 0x00000000 [2025-09-24 06:36:05.215] Write at address 0x00600018 (0xffff9a5c6018): 0x00400040, readback 0x00400040 [2025-09-24 06:36:05.244] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:36:05.244] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:36:05.355] Loaded PowerVR consumer services. [2025-09-24 06:36:05.499] Waiting data available... [2025-09-24 06:36:05.531] 512+0 records in [2025-09-24 06:36:05.531] 512+0 records out [2025-09-24 06:36:05.563] Starting syslogd/klogd: done [2025-09-24 06:36:05.579] DML Start [2025-09-24 06:36:05.755] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:36:05.995] DML res1: 0 [2025-09-24 06:36:06.341] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:36:06.341] Read Success [2025-09-24 06:36:06.341] Verifying certificate... [2025-09-24 06:36:06.581] Verified OK [2025-09-24 06:36:06.597] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:36:08.267] Verified OK [2025-09-24 06:36:08.267] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:36:08.912] Verified OK [2025-09-24 06:36:08.912] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:36:11.615] fs.protected_hardlinks = 1 [2025-09-24 06:36:11.615] fs.protected_symlinks = 1 [2025-09-24 06:36:11.631] kernel.modules_disabled = 1 [2025-09-24 06:36:11.839] [2025-09-24 06:36:11.839] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:36:13.108] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:36:20.814] SBL1:1210.0.1.0 [2025-09-24 06:36:20.846] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:36:22.429] SBL2:1210.0.1.0 [2025-09-24 06:36:22.477] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:36:22.573] j-A [2025-09-24 06:36:29.928] The R5 Autosar Classic is running [2025-09-24 06:36:29.950] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:36:29.950] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:36:30.557] INIT: version 2.96 booting [2025-09-24 06:36:30.669] INIT: Entering runlevel: 5 [2025-09-24 06:36:30.813] mtd24 attached [2025-09-24 06:36:30.829] mtd28 attached [2025-09-24 06:36:30.845] mtd32 attached [2025-09-24 06:36:30.861] ubi0:textures is mounted. [2025-09-24 06:36:30.893] RTNETLINK answers: File exists [2025-09-24 06:36:30.893] ubi2:dml_code is mounted. [2025-09-24 06:36:30.918] ubi1:animations is mounted. [2025-09-24 06:36:30.918] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:36:30.918] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:36:30.956] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:36:30.956] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:36:30.956] data.LB_FadeInType0=100 [2025-09-24 06:36:30.956] data.CHLH_FadeInType0=0 [2025-09-24 06:36:30.956] data.WU_FadeInDelay=0 [2025-09-24 06:36:30.956] max_time_out=0 [2025-09-24 06:36:30.956] No splash screen [2025-09-24 06:36:30.956] stop dss Done [2025-09-24 06:36:30.956] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:36:30.988] /dev/mem opened. [2025-09-24 06:36:31.014] Memory mapped at address 0xffff94745000. [2025-09-24 06:36:31.014] Read at address 0x00600018 (0xffff94745018): 0x00000000 [2025-09-24 06:36:31.014] Write at address 0x00600018 (0xffff94745018): 0x00400040, readback 0x00400040 [2025-09-24 06:36:31.075] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:36:31.075] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:36:31.172] Loaded PowerVR consumer services. [2025-09-24 06:36:31.299] Waiting data available... [2025-09-24 06:36:31.315] 512+0 records in [2025-09-24 06:36:31.315] 512+0 records out [2025-09-24 06:36:31.331] Starting syslogd/klogd: done [2025-09-24 06:36:31.363] DML Start [2025-09-24 06:36:31.524] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:36:31.764] DML res1: 0 [2025-09-24 06:36:32.211] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:36:32.211] Read Success [2025-09-24 06:36:32.227] Verifying certificate... [2025-09-24 06:36:32.483] Verified OK [2025-09-24 06:36:32.499] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:36:34.146] Verified OK [2025-09-24 06:36:34.146] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:36:34.764] Verified OK [2025-09-24 06:36:34.764] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:36:37.450] fs.protected_hardlinks = 1 [2025-09-24 06:36:37.450] fs.protected_symlinks = 1 [2025-09-24 06:36:37.466] kernel.modules_disabled = 1 [2025-09-24 06:36:37.658] [2025-09-24 06:36:37.658] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:36:38.832] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:36:46.627] SBL1:1210.0.1.0 [2025-09-24 06:36:46.675] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:36:48.241] SBL2:1210.0.1.0 [2025-09-24 06:36:48.289] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:36:48.401] j-A [2025-09-24 06:36:55.741] The R5 Autosar Classic is running [2025-09-24 06:36:55.766] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:36:55.766] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:36:56.373] INIT: version 2.96 booting [2025-09-24 06:36:56.484] INIT: Entering runlevel: 5 [2025-09-24 06:36:56.645] mtd24 attached [2025-09-24 06:36:56.645] mtd28 attached [2025-09-24 06:36:56.660] mtd32 attached [2025-09-24 06:36:56.692] ubi0:textures is mounted. [2025-09-24 06:36:56.692] ubi1:animations is mounted. [2025-09-24 06:36:56.764] RTNETLINK answers: File exists [2025-09-24 06:36:56.764] ubi2:dml_code is mounted. [2025-09-24 06:36:56.764] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:36:56.764] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:36:56.764] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:36:56.764] data.LB_FadeInType0=100 [2025-09-24 06:36:56.764] data.CHLH_FadeInType0=0 [2025-09-24 06:36:56.764] data.WU_FadeInDelay=0 [2025-09-24 06:36:56.764] max_time_out=0 [2025-09-24 06:36:56.764] No splash screen [2025-09-24 06:36:56.764] stop dss Done [2025-09-24 06:36:56.764] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:36:56.764] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:36:56.857] /dev/mem opened. [2025-09-24 06:36:56.857] Memory mapped at address 0xffff8362e000. [2025-09-24 06:36:56.857] Read at address 0x00600018 (0xffff8362e018): 0x00000000 [2025-09-24 06:36:56.857] Write at address 0x00600018 (0xffff8362e018): 0x00400040, readback 0x00400040 [2025-09-24 06:36:56.857] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:36:56.857] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:36:57.048] Loaded PowerVR consumer services. [2025-09-24 06:36:57.144] Waiting data available... [2025-09-24 06:36:57.176] 512+0 records in [2025-09-24 06:36:57.176] 512+0 records out [2025-09-24 06:36:57.208] Starting syslogd/klogd: done [2025-09-24 06:36:57.224] DML Start [2025-09-24 06:36:57.384] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:36:57.592] DML res1: 0 [2025-09-24 06:36:58.049] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:36:58.049] Read Success [2025-09-24 06:36:58.049] Verifying certificate... [2025-09-24 06:36:58.304] Verified OK [2025-09-24 06:36:58.320] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:36:59.856] Verified OK [2025-09-24 06:36:59.856] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:37:00.516] Verified OK [2025-09-24 06:37:00.516] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:37:03.171] fs.protected_hardlinks = 1 [2025-09-24 06:37:03.171] fs.protected_symlinks = 1 [2025-09-24 06:37:03.187] kernel.modules_disabled = 1 [2025-09-24 06:37:03.379] [2025-09-24 06:37:03.379] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:37:04.636] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:37:12.432] SBL1:1210.0.1.0 [2025-09-24 06:37:12.464] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:37:14.046] SBL2:1210.0.1.0 [2025-09-24 06:37:14.077] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:37:14.190] j-A [2025-09-24 06:37:21.544] The R5 Autosar Classic is running [2025-09-24 06:37:21.544] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:37:21.565] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:37:22.173] INIT: version 2.96 booting [2025-09-24 06:37:22.285] INIT: Entering runlevel: 5 [2025-09-24 06:37:22.428] mtd24 attached [2025-09-24 06:37:22.461] mtd32 attached [2025-09-24 06:37:22.461] mtd28 attached [2025-09-24 06:37:22.493] ubi0:textures is mounted. [2025-09-24 06:37:22.509] RTNETLINK answers: File exists [2025-09-24 06:37:22.570] ubi2:animations is mounted. [2025-09-24 06:37:22.570] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:37:22.570] ubi1:dml_code is mounted. [2025-09-24 06:37:22.570] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:37:22.570] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:37:22.570] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:37:22.570] data.LB_FadeInType0=100 [2025-09-24 06:37:22.570] data.CHLH_FadeInType0=0 [2025-09-24 06:37:22.570] data.WU_FadeInDelay=0 [2025-09-24 06:37:22.570] max_time_out=0 [2025-09-24 06:37:22.570] No splash screen [2025-09-24 06:37:22.570] stop dss Done [2025-09-24 06:37:22.570] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:37:22.639] /dev/mem opened. [2025-09-24 06:37:22.639] Memory mapped at address 0xffffb8036000. [2025-09-24 06:37:22.639] Read at address 0x00600018 (0xffffb8036018): 0x00000000 [2025-09-24 06:37:22.639] Write at address 0x00600018 (0xffffb8036018): 0x00400040, readback 0x00400040 [2025-09-24 06:37:22.686] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:37:22.686] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:37:22.939] Loaded PowerVR consumer services. [2025-09-24 06:37:22.939] Waiting data available... [2025-09-24 06:37:22.971] 512+0 records in [2025-09-24 06:37:22.971] 512+0 records out [2025-09-24 06:37:23.003] Starting syslogd/klogd: done [2025-09-24 06:37:23.019] DML Start [2025-09-24 06:37:23.163] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:37:23.403] DML res1: 0 [2025-09-24 06:37:23.851] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:37:23.871] Read Success [2025-09-24 06:37:23.871] Verifying certificate... [2025-09-24 06:37:24.127] Verified OK [2025-09-24 06:37:24.159] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:37:25.912] Verified OK [2025-09-24 06:37:25.912] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:37:26.517] Verified OK [2025-09-24 06:37:26.517] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:37:29.124] fs.protected_hardlinks = 1 [2025-09-24 06:37:29.124] fs.protected_symlinks = 1 [2025-09-24 06:37:29.139] kernel.modules_disabled = 1 [2025-09-24 06:37:29.332] [2025-09-24 06:37:29.332] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:37:30.439] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:37:38.218] SBL1:1210.0.1.0 [2025-09-24 06:37:38.266] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:37:39.834] SBL2:1210.0.1.0 [2025-09-24 06:37:39.881] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:37:39.977] j-A [2025-09-24 06:37:47.333] The R5 Autosar Classic is running [2025-09-24 06:37:47.355] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:37:47.355] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:37:47.963] INIT: version 2.96 booting [2025-09-24 06:37:48.074] INIT: Entering runlevel: 5 [2025-09-24 06:37:48.219] mtd24 attached [2025-09-24 06:37:48.235] mtd28 attached [2025-09-24 06:37:48.250] mtd32 attached [2025-09-24 06:37:48.282] ubi0:textures is mounted. [2025-09-24 06:37:48.298] RTNETLINK answers: File exists [2025-09-24 06:37:48.298] ubi1:animations is mounted. [2025-09-24 06:37:48.354] ubi2:dml_code is mounted. [2025-09-24 06:37:48.354] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:37:48.354] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:37:48.354] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:37:48.354] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:37:48.354] data.LB_FadeInType0=100 [2025-09-24 06:37:48.354] data.CHLH_FadeInType0=0 [2025-09-24 06:37:48.354] data.WU_FadeInDelay=0 [2025-09-24 06:37:48.354] max_time_out=0 [2025-09-24 06:37:48.354] No splash screen [2025-09-24 06:37:48.354] stop dss Done [2025-09-24 06:37:48.354] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:37:48.434] /dev/mem opened. [2025-09-24 06:37:48.434] Memory mapped at address 0xffff8977d000. [2025-09-24 06:37:48.434] Read at address 0x00600018 (0xffff8977d018): 0x00000000 [2025-09-24 06:37:48.434] Write at address 0x00600018 (0xffff8977d018): 0x00400040, readback 0x00400040 [2025-09-24 06:37:48.434] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:37:48.434] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:37:48.609] Loaded PowerVR consumer services. [2025-09-24 06:37:48.705] Waiting data available... [2025-09-24 06:37:48.737] 512+0 records in [2025-09-24 06:37:48.737] 512+0 records out [2025-09-24 06:37:48.769] Starting syslogd/klogd: done [2025-09-24 06:37:48.785] DML Start [2025-09-24 06:37:48.977] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:37:49.217] DML res1: 0 [2025-09-24 06:37:49.671] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:37:49.671] Read Success [2025-09-24 06:37:49.671] Verifying certificate... [2025-09-24 06:37:49.894] Verified OK [2025-09-24 06:37:49.910] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:37:51.524] Verified OK [2025-09-24 06:37:51.541] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:37:52.178] Verified OK [2025-09-24 06:37:52.178] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:37:54.736] fs.protected_hardlinks = 1 [2025-09-24 06:37:54.752] fs.protected_symlinks = 1 [2025-09-24 06:37:54.752] kernel.modules_disabled = 1 [2025-09-24 06:37:54.944] [2025-09-24 06:37:54.944] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:37:56.219] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:38:04.014] SBL1:1210.0.1.0 [2025-09-24 06:38:04.046] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:38:05.629] SBL2:1210.0.1.0 [2025-09-24 06:38:05.661] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:38:05.773] j-A [2025-09-24 06:38:13.149] The R5 Autosar Classic is running [2025-09-24 06:38:13.149] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:38:13.149] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:38:13.755] INIT: version 2.96 booting [2025-09-24 06:38:13.868] INIT: Entering runlevel: 5 [2025-09-24 06:38:14.027] mtd28 attached [2025-09-24 06:38:14.027] mtd32 attached [2025-09-24 06:38:14.043] mtd24 attached [2025-09-24 06:38:14.076] ubi0:animations is mounted. [2025-09-24 06:38:14.092] RTNETLINK answers: File exists [2025-09-24 06:38:14.092] ubi1:dml_code is mounted. [2025-09-24 06:38:14.147] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:38:14.147] ubi2:textures is mounted. [2025-09-24 06:38:14.147] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:38:14.147] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:38:14.147] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:38:14.147] data.LB_FadeInType0=100 [2025-09-24 06:38:14.147] data.CHLH_FadeInType0=0 [2025-09-24 06:38:14.147] data.WU_FadeInDelay=0 [2025-09-24 06:38:14.147] max_time_out=0 [2025-09-24 06:38:14.147] No splash screen [2025-09-24 06:38:14.147] stop dss Done [2025-09-24 06:38:14.147] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:38:14.218] /dev/mem opened. [2025-09-24 06:38:14.218] Memory mapped at address 0xffffaf3f5000. [2025-09-24 06:38:14.218] Read at address 0x00600018 (0xffffaf3f5018): 0x00000000 [2025-09-24 06:38:14.218] Write at address 0x00600018 (0xffffaf3f5018): 0x00400040, readback 0x00400040 [2025-09-24 06:38:14.234] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:38:14.234] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:38:14.346] Loaded PowerVR consumer services. [2025-09-24 06:38:14.506] Waiting data available... [2025-09-24 06:38:14.522] 512+0 records in [2025-09-24 06:38:14.522] 512+0 records out [2025-09-24 06:38:14.570] Starting syslogd/klogd: done [2025-09-24 06:38:14.586] DML Start [2025-09-24 06:38:14.762] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:38:14.970] DML res1: 0 [2025-09-24 06:38:15.414] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:38:15.414] Read Success [2025-09-24 06:38:15.414] Verifying certificate... [2025-09-24 06:38:15.653] Verified OK [2025-09-24 06:38:15.669] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:38:17.387] Verified OK [2025-09-24 06:38:17.387] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:38:17.898] Verified OK [2025-09-24 06:38:17.898] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:38:20.376] fs.protected_hardlinks = 1 [2025-09-24 06:38:20.376] fs.protected_symlinks = 1 [2025-09-24 06:38:20.392] kernel.modules_disabled = 1 [2025-09-24 06:38:20.584] [2025-09-24 06:38:20.584] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:38:22.004] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:38:29.817] SBL1:1210.0.1.0 [2025-09-24 06:38:29.865] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:38:31.432] SBL2:1210.0.1.0 [2025-09-24 06:38:31.480] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:38:31.591] j-A [2025-09-24 06:38:38.932] The R5 Autosar Classic is running [2025-09-24 06:38:38.963] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:38:38.963] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:38:39.570] INIT: version 2.96 booting [2025-09-24 06:38:39.682] INIT: Entering runlevel: 5 [2025-09-24 06:38:39.842] mtd28 attached [2025-09-24 06:38:39.857] mtd24 attached [2025-09-24 06:38:39.874] mtd32 attached [2025-09-24 06:38:39.890] ubi0:animations is mounted. [2025-09-24 06:38:39.906] ubi1:textures is mounted. [2025-09-24 06:38:39.922] RTNETLINK answers: File exists [2025-09-24 06:38:39.922] ubi2:dml_code is mounted. [2025-09-24 06:38:39.976] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:38:39.976] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:38:39.976] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:38:39.976] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:38:39.976] data.LB_FadeInType0=100 [2025-09-24 06:38:39.976] data.CHLH_FadeInType0=0 [2025-09-24 06:38:39.976] data.WU_FadeInDelay=0 [2025-09-24 06:38:39.976] max_time_out=0 [2025-09-24 06:38:39.976] No splash screen [2025-09-24 06:38:39.976] stop dss Done [2025-09-24 06:38:39.976] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:38:40.042] /dev/mem opened. [2025-09-24 06:38:40.042] Memory mapped at address 0xffffae564000. [2025-09-24 06:38:40.042] Read at address 0x00600018 (0xffffae564018): 0x00000000 [2025-09-24 06:38:40.042] Write at address 0x00600018 (0xffffae564018): 0x00400040, readback 0x00400040 [2025-09-24 06:38:40.042] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:38:40.058] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:38:40.234] Loaded PowerVR consumer services. [2025-09-24 06:38:40.330] Waiting data available... [2025-09-24 06:38:40.346] 512+0 records in [2025-09-24 06:38:40.346] 512+0 records out [2025-09-24 06:38:40.378] Starting syslogd/klogd: done [2025-09-24 06:38:40.393] DML Start [2025-09-24 06:38:40.570] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:38:40.762] DML res1: 0 [2025-09-24 06:38:41.257] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:38:41.273] Read Success [2025-09-24 06:38:41.273] Verifying certificate... [2025-09-24 06:38:41.545] Verified OK [2025-09-24 06:38:41.577] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:38:43.191] Verified OK [2025-09-24 06:38:43.191] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:38:43.827] Verified OK [2025-09-24 06:38:43.827] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:38:46.385] fs.protected_hardlinks = 1 [2025-09-24 06:38:46.385] fs.protected_symlinks = 1 [2025-09-24 06:38:46.400] kernel.modules_disabled = 1 [2025-09-24 06:38:46.592] [2025-09-24 06:38:46.592] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:38:47.800] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:38:55.642] SBL1:1210.0.1.0 [2025-09-24 06:38:55.690] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:38:57.258] SBL2:1210.0.1.0 [2025-09-24 06:38:57.306] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:38:57.417] j-A [2025-09-24 06:39:04.758] The R5 Autosar Classic is running [2025-09-24 06:39:04.783] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:39:04.783] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:39:05.390] INIT: version 2.96 booting [2025-09-24 06:39:05.502] INIT: Entering runlevel: 5 [2025-09-24 06:39:05.647] mtd24 attached [2025-09-24 06:39:05.663] mtd32 attached [2025-09-24 06:39:05.678] mtd28 attached [2025-09-24 06:39:05.710] ubi0:textures is mounted. [2025-09-24 06:39:05.726] RTNETLINK answers: File exists [2025-09-24 06:39:05.785] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:39:05.785] ubi2:animations is mounted. [2025-09-24 06:39:05.785] ubi1:dml_code is mounted. [2025-09-24 06:39:05.785] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:39:05.785] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:39:05.785] data.LB_FadeInType0=100 [2025-09-24 06:39:05.785] data.CHLH_FadeInType0=0 [2025-09-24 06:39:05.785] data.WU_FadeInDelay=0 [2025-09-24 06:39:05.785] max_time_out=0 [2025-09-24 06:39:05.785] No splash screen [2025-09-24 06:39:05.785] stop dss Done [2025-09-24 06:39:05.785] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:39:05.785] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:39:05.851] /dev/mem opened. [2025-09-24 06:39:05.851] Memory mapped at address 0xffff8e724000. [2025-09-24 06:39:05.851] Read at address 0x00600018 (0xffff8e724018): 0x00000000 [2025-09-24 06:39:05.851] Write at address 0x00600018 (0xffff8e724018): 0x00400040, readback 0x00400040 [2025-09-24 06:39:05.851] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:39:05.867] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:39:06.011] Loaded PowerVR consumer services. [2025-09-24 06:39:06.139] Waiting data available... [2025-09-24 06:39:06.155] 512+0 records in [2025-09-24 06:39:06.155] 512+0 records out [2025-09-24 06:39:06.171] Starting syslogd/klogd: done [2025-09-24 06:39:06.203] DML Start [2025-09-24 06:39:06.379] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:39:06.587] DML res1: 0 [2025-09-24 06:39:07.064] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:39:07.064] Read Success [2025-09-24 06:39:07.064] Verifying certificate... [2025-09-24 06:39:07.271] Verified OK [2025-09-24 06:39:07.303] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:39:09.025] Verified OK [2025-09-24 06:39:09.025] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:39:09.617] Verified OK [2025-09-24 06:39:09.617] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:39:12.191] fs.protected_hardlinks = 1 [2025-09-24 06:39:12.191] fs.protected_symlinks = 1 [2025-09-24 06:39:12.207] kernel.modules_disabled = 1 [2025-09-24 06:39:12.399] [2025-09-24 06:39:12.399] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:39:13.587] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:39:21.445] SBL1:1210.0.1.0 [2025-09-24 06:39:21.493] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:39:23.059] SBL2:1210.0.1.0 [2025-09-24 06:39:23.107] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:39:23.204] j-A [2025-09-24 06:39:30.559] The R5 Autosar Classic is running [2025-09-24 06:39:30.581] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:39:30.581] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:39:31.189] INIT: version 2.96 booting [2025-09-24 06:39:31.301] INIT: Entering runlevel: 5 [2025-09-24 06:39:31.462] mtd24 attached [2025-09-24 06:39:31.462] mtd28 attached [2025-09-24 06:39:31.477] mtd32 attached [2025-09-24 06:39:31.509] ubi0:textures is mounted. [2025-09-24 06:39:31.526] ubi1:animations is mounted. [2025-09-24 06:39:31.526] RTNETLINK answers: File exists [2025-09-24 06:39:31.587] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:39:31.587] ubi2:dml_code is mounted. [2025-09-24 06:39:31.587] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:39:31.587] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:39:31.587] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:39:31.587] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:39:31.587] data.LB_FadeInType0=100 [2025-09-24 06:39:31.587] data.CHLH_FadeInType0=0 [2025-09-24 06:39:31.587] data.WU_FadeInDelay=0 [2025-09-24 06:39:31.587] max_time_out=0 [2025-09-24 06:39:31.587] No splash screen [2025-09-24 06:39:31.587] stop dss Done [2025-09-24 06:39:31.619] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:39:31.635] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:39:31.667] /dev/mem opened. [2025-09-24 06:39:31.667] Memory mapped at address 0xffffa2ac6000. [2025-09-24 06:39:31.667] Read at address 0x00600018 (0xffffa2ac6018): 0x00000000 [2025-09-24 06:39:31.667] Write at address 0x00600018 (0xffffa2ac6018): 0x00400040, readback 0x00400040 [2025-09-24 06:39:31.747] Loaded PowerVR consumer services. [2025-09-24 06:39:31.939] Waiting data available... [2025-09-24 06:39:31.955] 512+0 records in [2025-09-24 06:39:31.955] 512+0 records out [2025-09-24 06:39:32.003] Starting syslogd/klogd: done [2025-09-24 06:39:32.019] DML Start [2025-09-24 06:39:32.178] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:39:32.354] DML res1: 0 [2025-09-24 06:39:32.899] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:39:32.920] Read Success [2025-09-24 06:39:32.920] Verifying certificate... [2025-09-24 06:39:33.159] Verified OK [2025-09-24 06:39:33.191] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:39:34.914] Verified OK [2025-09-24 06:39:34.914] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:39:35.467] Verified OK [2025-09-24 06:39:35.467] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:39:37.929] fs.protected_hardlinks = 1 [2025-09-24 06:39:37.929] fs.protected_symlinks = 1 [2025-09-24 06:39:37.945] kernel.modules_disabled = 1 [2025-09-24 06:39:38.137] [2025-09-24 06:39:38.137] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:39:39.406] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:39:47.238] SBL1:1210.0.1.0 [2025-09-24 06:39:47.270] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:39:48.852] SBL2:1210.0.1.0 [2025-09-24 06:39:48.900] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:39:48.997] j-A [2025-09-24 06:39:56.351] The R5 Autosar Classic is running [2025-09-24 06:39:56.351] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:39:56.372] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:39:56.980] INIT: version 2.96 booting [2025-09-24 06:39:57.092] INIT: Entering runlevel: 5 [2025-09-24 06:39:57.236] mtd24 attached [2025-09-24 06:39:57.252] mtd28 attached [2025-09-24 06:39:57.268] mtd32 attached [2025-09-24 06:39:57.316] ubi0:textures is mounted. [2025-09-24 06:39:57.316] RTNETLINK answers: File exists [2025-09-24 06:39:57.369] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:39:57.369] ubi1:animations is mounted. [2025-09-24 06:39:57.369] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:39:57.369] ubi2:dml_code is mounted. [2025-09-24 06:39:57.369] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:39:57.369] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:39:57.369] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:39:57.369] data.LB_FadeInType0=100 [2025-09-24 06:39:57.369] data.CHLH_FadeInType0=0 [2025-09-24 06:39:57.369] data.WU_FadeInDelay=0 [2025-09-24 06:39:57.369] max_time_out=0 [2025-09-24 06:39:57.369] No splash screen [2025-09-24 06:39:57.369] stop dss Done [2025-09-24 06:39:57.400] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:39:57.417] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:39:57.465] /dev/mem opened. [2025-09-24 06:39:57.465] Memory mapped at address 0xffffb0d5b000. [2025-09-24 06:39:57.465] Read at address 0x00600018 (0xffffb0d5b018): 0x00000000 [2025-09-24 06:39:57.465] Write at address 0x00600018 (0xffffb0d5b018): 0x00400040, readback 0x00400040 [2025-09-24 06:39:57.610] Loaded PowerVR consumer services. [2025-09-24 06:39:57.737] Waiting data available... [2025-09-24 06:39:57.753] 512+0 records in [2025-09-24 06:39:57.753] 512+0 records out [2025-09-24 06:39:57.769] Starting syslogd/klogd: done [2025-09-24 06:39:57.801] DML Start [2025-09-24 06:39:57.978] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:39:58.201] DML res1: 0 [2025-09-24 06:39:58.617] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:39:58.633] Read Success [2025-09-24 06:39:58.633] Verifying certificate... [2025-09-24 06:39:58.921] Verified OK [2025-09-24 06:39:58.937] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:40:00.549] Verified OK [2025-09-24 06:40:00.549] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:40:01.167] Verified OK [2025-09-24 06:40:01.167] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:40:03.726] fs.protected_hardlinks = 1 [2025-09-24 06:40:03.742] fs.protected_symlinks = 1 [2025-09-24 06:40:03.742] kernel.modules_disabled = 1 [2025-09-24 06:40:03.934] [2025-09-24 06:40:03.934] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:40:05.267] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:40:13.036] SBL1:1210.0.1.0 [2025-09-24 06:40:13.084] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:40:14.651] SBL2:1210.0.1.0 [2025-09-24 06:40:14.699] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:40:14.811] j-A [2025-09-24 06:40:22.150] The R5 Autosar Classic is running [2025-09-24 06:40:22.181] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:40:22.181] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:40:22.788] INIT: version 2.96 booting [2025-09-24 06:40:22.900] INIT: Entering runlevel: 5 [2025-09-24 06:40:23.044] mtd28 attached [2025-09-24 06:40:23.060] mtd24 attached [2025-09-24 06:40:23.076] mtd32 attached [2025-09-24 06:40:23.108] RTNETLINK answers: File exists [2025-09-24 06:40:23.124] ubi0:animations is mounted. [2025-09-24 06:40:23.124] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:40:23.159] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:40:23.159] ubi1:textures is mounted. [2025-09-24 06:40:23.159] ubi2:dml_code is mounted. [2025-09-24 06:40:23.159] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:40:23.159] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:40:23.159] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:40:23.184] data.LB_FadeInType0=100 [2025-09-24 06:40:23.184] data.CHLH_FadeInType0=0 [2025-09-24 06:40:23.184] data.WU_FadeInDelay=0 [2025-09-24 06:40:23.184] max_time_out=0 [2025-09-24 06:40:23.184] No splash screen [2025-09-24 06:40:23.184] stop dss Done [2025-09-24 06:40:23.199] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:40:23.228] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:40:23.263] /dev/mem opened. [2025-09-24 06:40:23.263] Memory mapped at address 0xffffbc531000. [2025-09-24 06:40:23.263] Read at address 0x00600018 (0xffffbc531018): 0x00000000 [2025-09-24 06:40:23.263] Write at address 0x00600018 (0xffffbc531018): 0x00400040, readback 0x00400040 [2025-09-24 06:40:23.535] Loaded PowerVR consumer services. [2025-09-24 06:40:23.583] Waiting data available... [2025-09-24 06:40:23.599] 512+0 records in [2025-09-24 06:40:23.599] 512+0 records out [2025-09-24 06:40:23.615] Starting syslogd/klogd: done [2025-09-24 06:40:23.631] DML Start [2025-09-24 06:40:23.823] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:40:24.047] DML res1: 0 [2025-09-24 06:40:24.525] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:40:24.525] Read Success [2025-09-24 06:40:24.525] Verifying certificate... [2025-09-24 06:40:24.749] Verified OK [2025-09-24 06:40:24.764] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:40:26.316] Verified OK [2025-09-24 06:40:26.316] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:40:26.931] Verified OK [2025-09-24 06:40:26.931] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:40:29.634] fs.protected_hardlinks = 1 [2025-09-24 06:40:29.634] fs.protected_symlinks = 1 [2025-09-24 06:40:29.650] kernel.modules_disabled = 1 [2025-09-24 06:40:29.842] [2025-09-24 06:40:29.842] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:40:31.062] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:40:38.847] SBL1:1210.0.1.0 [2025-09-24 06:40:38.878] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:40:40.462] SBL2:1210.0.1.0 [2025-09-24 06:40:40.494] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:40:40.606] j-A [2025-09-24 06:40:47.979] The R5 Autosar Classic is running [2025-09-24 06:40:47.979] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:40:47.979] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:40:48.586] INIT: version 2.96 booting [2025-09-24 06:40:48.699] INIT: Entering runlevel: 5 [2025-09-24 06:40:48.842] mtd24 attached [2025-09-24 06:40:48.858] mtd28 attached [2025-09-24 06:40:48.875] mtd32 attached [2025-09-24 06:40:48.923] RTNETLINK answers: File exists [2025-09-24 06:40:48.923] ubi1:animations is mounted. [2025-09-24 06:40:48.982] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:40:48.982] ubi0:textures is mounted. [2025-09-24 06:40:48.982] ubi2:dml_code is mounted. [2025-09-24 06:40:48.982] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:40:48.982] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:40:48.982] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:40:48.982] data.LB_FadeInType0=100 [2025-09-24 06:40:48.982] data.CHLH_FadeInType0=0 [2025-09-24 06:40:48.982] data.WU_FadeInDelay=0 [2025-09-24 06:40:48.982] max_time_out=0 [2025-09-24 06:40:48.982] No splash screen [2025-09-24 06:40:48.982] stop dss Done [2025-09-24 06:40:48.982] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:40:49.060] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:40:49.060] /dev/mem opened. [2025-09-24 06:40:49.060] Memory mapped at address 0xffffb4d77000. [2025-09-24 06:40:49.060] Read at address 0x00600018 (0xffffb4d77018): 0x00000000 [2025-09-24 06:40:49.060] Write at address 0x00600018 (0xffffb4d77018): 0x00400040, readback 0x00400040 [2025-09-24 06:40:49.060] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:40:49.189] Loaded PowerVR consumer services. [2025-09-24 06:40:49.332] Waiting data available... [2025-09-24 06:40:49.364] 512+0 records in [2025-09-24 06:40:49.364] 512+0 records out [2025-09-24 06:40:49.380] Starting syslogd/klogd: done [2025-09-24 06:40:49.396] DML Start [2025-09-24 06:40:49.620] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:40:49.828] DML res1: 0 [2025-09-24 06:40:50.209] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:40:50.209] Read Success [2025-09-24 06:40:50.209] Verifying certificate... [2025-09-24 06:40:50.449] Verified OK [2025-09-24 06:40:50.465] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:40:52.167] Verified OK [2025-09-24 06:40:52.167] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:40:52.679] Verified OK [2025-09-24 06:40:52.695] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:40:55.461] fs.protected_hardlinks = 1 [2025-09-24 06:40:55.477] fs.protected_symlinks = 1 [2025-09-24 06:40:55.477] kernel.modules_disabled = 1 [2025-09-24 06:40:55.669] [2025-09-24 06:40:55.669] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:40:56.852] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:41:04.639] SBL1:1210.0.1.0 [2025-09-24 06:41:04.687] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:41:06.253] SBL2:1210.0.1.0 [2025-09-24 06:41:06.301] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:41:06.413] j-A [2025-09-24 06:41:13.752] The R5 Autosar Classic is running [2025-09-24 06:41:13.777] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:41:13.777] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:41:14.385] INIT: version 2.96 booting [2025-09-24 06:41:14.513] INIT: Entering runlevel: 5 [2025-09-24 06:41:14.657] mtd24 attached [2025-09-24 06:41:14.672] mtd32 attached [2025-09-24 06:41:14.688] mtd28 attached [2025-09-24 06:41:14.705] ubi0:textures is mounted. [2025-09-24 06:41:14.737] RTNETLINK answers: File exists [2025-09-24 06:41:14.737] ubi2:animations is mounted. [2025-09-24 06:41:14.787] ubi1:dml_code is mounted. [2025-09-24 06:41:14.787] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:41:14.787] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:41:14.787] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:41:14.787] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:41:14.787] data.LB_FadeInType0=100 [2025-09-24 06:41:14.787] data.CHLH_FadeInType0=0 [2025-09-24 06:41:14.787] data.WU_FadeInDelay=0 [2025-09-24 06:41:14.787] max_time_out=0 [2025-09-24 06:41:14.787] No splash screen [2025-09-24 06:41:14.787] stop dss Done [2025-09-24 06:41:14.787] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:41:14.819] /dev/mem opened. [2025-09-24 06:41:14.819] Memory mapped at address 0xffff8bd94000. [2025-09-24 06:41:14.860] Read at address 0x00600018 (0xffff8bd94018): 0x00000000 [2025-09-24 06:41:14.860] Write at address 0x00600018 (0xffff8bd94018): 0x00400040, readback 0x00400040 [2025-09-24 06:41:14.860] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:41:14.860] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:41:15.020] Loaded PowerVR consumer services. [2025-09-24 06:41:15.148] Waiting data available... [2025-09-24 06:41:15.179] 512+0 records in [2025-09-24 06:41:15.179] 512+0 records out [2025-09-24 06:41:15.211] Starting syslogd/klogd: done [2025-09-24 06:41:15.227] DML Start [2025-09-24 06:41:15.372] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:41:15.612] DML res1: 0 [2025-09-24 06:41:16.091] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:41:16.112] Read Success [2025-09-24 06:41:16.112] Verifying certificate... [2025-09-24 06:41:16.400] Verified OK [2025-09-24 06:41:16.432] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:41:18.084] Verified OK [2025-09-24 06:41:18.084] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:41:18.659] Verified OK [2025-09-24 06:41:18.659] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:41:21.234] fs.protected_hardlinks = 1 [2025-09-24 06:41:21.234] fs.protected_symlinks = 1 [2025-09-24 06:41:21.250] kernel.modules_disabled = 1 [2025-09-24 06:41:21.442] [2025-09-24 06:41:21.442] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:41:22.641] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:41:30.451] SBL1:1210.0.1.0 [2025-09-24 06:41:30.483] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:41:32.067] SBL2:1210.0.1.0 [2025-09-24 06:41:32.098] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:41:32.210] j-A [2025-09-24 06:41:39.565] The R5 Autosar Classic is running [2025-09-24 06:41:39.565] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:41:39.586] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:41:40.193] INIT: version 2.96 booting [2025-09-24 06:41:40.305] INIT: Entering runlevel: 5 [2025-09-24 06:41:40.450] mtd24 attached [2025-09-24 06:41:40.466] mtd32 attached [2025-09-24 06:41:40.482] mtd28 attached [2025-09-24 06:41:40.529] RTNETLINK answers: File exists [2025-09-24 06:41:40.529] ubi0:textures is mounted. [2025-09-24 06:41:40.583] ubi1:dml_code is mounted. [2025-09-24 06:41:40.584] ubi2:animations is mounted. [2025-09-24 06:41:40.584] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:41:40.584] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:41:40.584] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:41:40.584] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:41:40.584] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:41:40.584] data.LB_FadeInType0=100 [2025-09-24 06:41:40.584] data.CHLH_FadeInType0=0 [2025-09-24 06:41:40.584] data.WU_FadeInDelay=0 [2025-09-24 06:41:40.584] max_time_out=0 [2025-09-24 06:41:40.584] No splash screen [2025-09-24 06:41:40.584] stop dss Done [2025-09-24 06:41:40.615] /dev/mem opened. [2025-09-24 06:41:40.661] Memory mapped at address 0xffffb4dcc000. [2025-09-24 06:41:40.661] Read at address 0x00600018 (0xffffb4dcc018): 0x00000000 [2025-09-24 06:41:40.661] Write at address 0x00600018 (0xffffb4dcc018): 0x00400040, readback 0x00400040 [2025-09-24 06:41:40.661] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:41:40.661] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:41:40.789] Loaded PowerVR consumer services. [2025-09-24 06:41:40.933] Waiting data available... [2025-09-24 06:41:40.965] 512+0 records in [2025-09-24 06:41:40.965] 512+0 records out [2025-09-24 06:41:41.013] Starting syslogd/klogd: done [2025-09-24 06:41:41.029] DML Start [2025-09-24 06:41:41.173] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:41:41.428] DML res1: 0 [2025-09-24 06:41:41.840] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:41:41.840] Read Success [2025-09-24 06:41:41.840] Verifying certificate... [2025-09-24 06:41:42.079] Verified OK [2025-09-24 06:41:42.095] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:41:43.742] Verified OK [2025-09-24 06:41:43.742] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:41:44.348] Verified OK [2025-09-24 06:41:44.348] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:41:46.987] fs.protected_hardlinks = 1 [2025-09-24 06:41:47.003] fs.protected_symlinks = 1 [2025-09-24 06:41:47.003] kernel.modules_disabled = 1 [2025-09-24 06:41:47.195] [2025-09-24 06:41:47.195] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:41:48.450] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:41:56.262] SBL1:1210.0.1.0 [2025-09-24 06:41:56.293] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:41:57.877] SBL2:1210.0.1.0 [2025-09-24 06:41:57.909] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:41:58.021] j-A [2025-09-24 06:42:05.395] The R5 Autosar Classic is running [2025-09-24 06:42:05.395] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:42:05.395] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:42:06.003] INIT: version 2.96 booting [2025-09-24 06:42:06.114] INIT: Entering runlevel: 5 [2025-09-24 06:42:06.275] mtd24 attached [2025-09-24 06:42:06.275] mtd28 attached [2025-09-24 06:42:06.291] mtd32 attached [2025-09-24 06:42:06.338] ubi1:animations is mounted. [2025-09-24 06:42:06.405] ubi0:textures is mounted. [2025-09-24 06:42:06.405] ubi2:dml_code is mounted. [2025-09-24 06:42:06.405] RTNETLINK answers: File exists [2025-09-24 06:42:06.405] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:42:06.405] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:42:06.405] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:42:06.405] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:42:06.405] data.LB_FadeInType0=100 [2025-09-24 06:42:06.405] data.CHLH_FadeInType0=0 [2025-09-24 06:42:06.405] data.WU_FadeInDelay=0 [2025-09-24 06:42:06.405] max_time_out=0 [2025-09-24 06:42:06.405] No splash screen [2025-09-24 06:42:06.405] stop dss Done [2025-09-24 06:42:06.405] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:42:06.454] /dev/mem opened. [2025-09-24 06:42:06.480] Memory mapped at address 0xffffb80ae000. [2025-09-24 06:42:06.480] Read at address 0x00600018 (0xffffb80ae018): 0x00000000 [2025-09-24 06:42:06.480] Write at address 0x00600018 (0xffffb80ae018): 0x00400040, readback 0x00400040 [2025-09-24 06:42:06.507] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:42:06.507] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:42:06.571] Loaded PowerVR consumer services. [2025-09-24 06:42:06.747] Waiting data available... [2025-09-24 06:42:06.763] 512+0 records in [2025-09-24 06:42:06.763] 512+0 records out [2025-09-24 06:42:06.811] Starting syslogd/klogd: done [2025-09-24 06:42:06.827] DML Start [2025-09-24 06:42:07.003] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:42:07.211] DML res1: 0 [2025-09-24 06:42:07.705] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:42:07.705] Read Success [2025-09-24 06:42:07.705] Verifying certificate... [2025-09-24 06:42:07.945] Verified OK [2025-09-24 06:42:07.961] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:42:09.624] Verified OK [2025-09-24 06:42:09.624] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:42:10.261] Verified OK [2025-09-24 06:42:10.261] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:42:12.852] fs.protected_hardlinks = 1 [2025-09-24 06:42:12.867] fs.protected_symlinks = 1 [2025-09-24 06:42:12.867] kernel.modules_disabled = 1 [2025-09-24 06:42:13.075] [2025-09-24 06:42:13.075] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:42:14.270] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:42:22.041] SBL1:1210.0.1.0 [2025-09-24 06:42:22.089] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:42:23.671] SBL2:1210.0.1.0 [2025-09-24 06:42:23.703] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:42:23.816] j-A [2025-09-24 06:42:31.190] The R5 Autosar Classic is running [2025-09-24 06:42:31.190] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:42:31.190] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:42:31.797] INIT: version 2.96 booting [2025-09-24 06:42:31.910] INIT: Entering runlevel: 5 [2025-09-24 06:42:32.053] mtd24 attached [2025-09-24 06:42:32.069] mtd28 attached [2025-09-24 06:42:32.085] mtd32 attached [2025-09-24 06:42:32.117] ubi0:textures is mounted. [2025-09-24 06:42:32.133] RTNETLINK answers: File exists [2025-09-24 06:42:32.133] ubi2:dml_code is mounted. [2025-09-24 06:42:32.156] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:42:32.156] ubi1:animations is mounted. [2025-09-24 06:42:32.156] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:42:32.192] data.LB_FadeInType0=100 [2025-09-24 06:42:32.192] data.CHLH_FadeInType0=0 [2025-09-24 06:42:32.192] data.WU_FadeInDelay=0 [2025-09-24 06:42:32.192] max_time_out=0 [2025-09-24 06:42:32.192] No splash screen [2025-09-24 06:42:32.192] stop dss Done [2025-09-24 06:42:32.192] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:42:32.192] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:42:32.192] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:42:32.241] /dev/mem opened. [2025-09-24 06:42:32.241] Memory mapped at address 0xffffaf71d000. [2025-09-24 06:42:32.241] Read at address 0x00600018 (0xffffaf71d018): 0x00000000 [2025-09-24 06:42:32.241] Write at address 0x00600018 (0xffffaf71d018): 0x00400040, readback 0x00400040 [2025-09-24 06:42:32.257] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:42:32.273] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:42:32.401] Loaded PowerVR consumer services. [2025-09-24 06:42:32.529] Waiting data available... [2025-09-24 06:42:32.577] 512+0 records in [2025-09-24 06:42:32.577] 512+0 records out [2025-09-24 06:42:32.625] Starting syslogd/klogd: done [2025-09-24 06:42:32.641] DML Start [2025-09-24 06:42:32.801] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:42:32.992] DML res1: 0 [2025-09-24 06:42:33.498] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:42:33.498] Read Success [2025-09-24 06:42:33.498] Verifying certificate... [2025-09-24 06:42:33.737] Verified OK [2025-09-24 06:42:33.753] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:42:35.432] Verified OK [2025-09-24 06:42:35.432] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:42:35.976] Verified OK [2025-09-24 06:42:35.991] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:42:38.389] fs.protected_hardlinks = 1 [2025-09-24 06:42:38.389] fs.protected_symlinks = 1 [2025-09-24 06:42:38.405] kernel.modules_disabled = 1 [2025-09-24 06:42:38.582] [2025-09-24 06:42:38.582] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:42:40.067] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:42:47.837] SBL1:1210.0.1.0 [2025-09-24 06:42:47.870] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:42:49.453] SBL2:1210.0.1.0 [2025-09-24 06:42:49.501] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:42:49.597] j-A [2025-09-24 06:42:56.952] The R5 Autosar Classic is running [2025-09-24 06:42:56.952] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:42:56.973] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:42:57.581] INIT: version 2.96 booting [2025-09-24 06:42:57.693] INIT: Entering runlevel: 5 [2025-09-24 06:42:57.836] mtd28 attached [2025-09-24 06:42:57.852] mtd32 attached [2025-09-24 06:42:57.868] mtd24 attached [2025-09-24 06:42:57.900] ubi0:animations is mounted. [2025-09-24 06:42:57.916] RTNETLINK answers: File exists [2025-09-24 06:42:57.953] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:42:57.953] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:42:57.953] ubi2:textures is mounted. [2025-09-24 06:42:57.953] ubi1:dml_code is mounted. [2025-09-24 06:42:57.953] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:42:57.953] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:42:57.953] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:42:57.969] data.LB_FadeInType0=100 [2025-09-24 06:42:57.969] data.CHLH_FadeInType0=0 [2025-09-24 06:42:57.990] data.WU_FadeInDelay=0 [2025-09-24 06:42:57.990] max_time_out=0 [2025-09-24 06:42:57.990] No splash screen [2025-09-24 06:42:57.990] stop dss Done [2025-09-24 06:42:58.021] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:42:58.021] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:42:58.059] /dev/mem opened. [2025-09-24 06:42:58.059] Memory mapped at address 0xffff9fadd000. [2025-09-24 06:42:58.059] Read at address 0x00600018 (0xffff9fadd018): 0x00000000 [2025-09-24 06:42:58.059] Write at address 0x00600018 (0xffff9fadd018): 0x00400040, readback 0x00400040 [2025-09-24 06:42:58.235] Loaded PowerVR consumer services. [2025-09-24 06:42:58.331] Waiting data available... [2025-09-24 06:42:58.363] 512+0 records in [2025-09-24 06:42:58.363] 512+0 records out [2025-09-24 06:42:58.395] Starting syslogd/klogd: done [2025-09-24 06:42:58.411] DML Start [2025-09-24 06:42:58.603] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:42:58.843] DML res1: 0 [2025-09-24 06:42:59.266] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:42:59.266] Read Success [2025-09-24 06:42:59.266] Verifying certificate... [2025-09-24 06:42:59.489] Verified OK [2025-09-24 06:42:59.489] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:43:01.096] Verified OK [2025-09-24 06:43:01.096] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:43:01.714] Verified OK [2025-09-24 06:43:01.714] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:43:04.303] fs.protected_hardlinks = 1 [2025-09-24 06:43:04.336] fs.protected_symlinks = 1 [2025-09-24 06:43:04.336] kernel.modules_disabled = 1 [2025-09-24 06:43:04.543] [2025-09-24 06:43:04.543] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:43:05.846] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:43:13.640] SBL1:1210.0.1.0 [2025-09-24 06:43:13.688] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:43:15.255] SBL2:1210.0.1.0 [2025-09-24 06:43:15.302] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:43:15.398] j-A [2025-09-24 06:43:22.754] The R5 Autosar Classic is running [2025-09-24 06:43:22.778] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:43:22.778] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:43:23.384] INIT: version 2.96 booting [2025-09-24 06:43:23.497] INIT: Entering runlevel: 5 [2025-09-24 06:43:23.641] mtd24 attached [2025-09-24 06:43:23.657] mtd28 attached [2025-09-24 06:43:23.673] mtd32 attached [2025-09-24 06:43:23.704] ubi0:textures is mounted. [2025-09-24 06:43:23.720] ubi1:animations is mounted. [2025-09-24 06:43:23.720] RTNETLINK answers: File exists [2025-09-24 06:43:23.781] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:43:23.781] ubi2:dml_code is mounted. [2025-09-24 06:43:23.781] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:43:23.781] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:43:23.781] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:43:23.781] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:43:23.781] data.LB_FadeInType0=100 [2025-09-24 06:43:23.781] data.CHLH_FadeInType0=0 [2025-09-24 06:43:23.781] data.WU_FadeInDelay=0 [2025-09-24 06:43:23.781] max_time_out=0 [2025-09-24 06:43:23.781] No splash screen [2025-09-24 06:43:23.781] stop dss Done [2025-09-24 06:43:23.814] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:43:23.851] /dev/mem opened. [2025-09-24 06:43:23.851] Memory mapped at address 0xffffaaf91000. [2025-09-24 06:43:23.851] Read at address 0x00600018 (0xffffaaf91018): 0x00000000 [2025-09-24 06:43:23.851] Write at address 0x00600018 (0xffffaaf91018): 0x00400040, readback 0x00400040 [2025-09-24 06:43:23.851] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:43:23.946] Loaded PowerVR consumer services. [2025-09-24 06:43:24.123] Waiting data available... [2025-09-24 06:43:24.170] 512+0 records in [2025-09-24 06:43:24.170] 512+0 records out [2025-09-24 06:43:24.202] Starting syslogd/klogd: done [2025-09-24 06:43:24.219] DML Start [2025-09-24 06:43:24.394] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:43:24.666] DML res1: 0 [2025-09-24 06:43:25.058] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:43:25.058] Read Success [2025-09-24 06:43:25.058] Verifying certificate... [2025-09-24 06:43:25.266] Verified OK [2025-09-24 06:43:25.282] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:43:26.862] Verified OK [2025-09-24 06:43:26.862] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:43:27.429] Verified OK [2025-09-24 06:43:27.429] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:43:30.227] fs.protected_hardlinks = 1 [2025-09-24 06:43:30.242] fs.protected_symlinks = 1 [2025-09-24 06:43:30.242] kernel.modules_disabled = 1 [2025-09-24 06:43:30.434] [2025-09-24 06:43:30.434] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:43:31.665] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:43:39.431] SBL1:1210.0.1.0 [2025-09-24 06:43:39.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:43:41.046] SBL2:1210.0.1.0 [2025-09-24 06:43:41.093] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:43:41.205] j-A [2025-09-24 06:43:48.545] The R5 Autosar Classic is running [2025-09-24 06:43:48.570] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:43:48.570] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:43:49.177] INIT: version 2.96 booting [2025-09-24 06:43:49.290] INIT: Entering runlevel: 5 [2025-09-24 06:43:49.450] mtd28 attached [2025-09-24 06:43:49.466] mtd32 attached [2025-09-24 06:43:49.466] mtd24 attached [2025-09-24 06:43:49.562] RTNETLINK answers: File exists [2025-09-24 06:43:49.562] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:43:49.562] ubi0:animations is mounted. [2025-09-24 06:43:49.562] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:43:49.562] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:43:49.562] ubi2:textures is mounted. [2025-09-24 06:43:49.562] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:43:49.562] ubi1:dml_code is mounted. [2025-09-24 06:43:49.562] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:43:49.591] data.LB_FadeInType0=100 [2025-09-24 06:43:49.591] data.CHLH_FadeInType0=0 [2025-09-24 06:43:49.591] data.WU_FadeInDelay=0 [2025-09-24 06:43:49.591] max_time_out=0 [2025-09-24 06:43:49.591] No splash screen [2025-09-24 06:43:49.591] stop dss Done [2025-09-24 06:43:49.623] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:43:49.623] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:43:49.640] /dev/mem opened. [2025-09-24 06:43:49.666] Memory mapped at address 0xffffb84a6000. [2025-09-24 06:43:49.666] Read at address 0x00600018 (0xffffb84a6018): 0x00000000 [2025-09-24 06:43:49.666] Write at address 0x00600018 (0xffffb84a6018): 0x00400040, readback 0x00400040 [2025-09-24 06:43:49.905] Loaded PowerVR consumer services. [2025-09-24 06:43:49.921] Waiting data available... [2025-09-24 06:43:49.953] 512+0 records in [2025-09-24 06:43:49.953] 512+0 records out [2025-09-24 06:43:50.001] Starting syslogd/klogd: done [2025-09-24 06:43:50.018] DML Start [2025-09-24 06:43:50.226] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:43:50.433] DML res1: 0 [2025-09-24 06:43:50.872] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:43:50.872] Read Success [2025-09-24 06:43:50.872] Verifying certificate... [2025-09-24 06:43:51.143] Verified OK [2025-09-24 06:43:51.160] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:43:52.864] Verified OK [2025-09-24 06:43:52.864] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:43:53.449] Verified OK [2025-09-24 06:43:53.449] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:43:55.959] fs.protected_hardlinks = 1 [2025-09-24 06:43:55.986] fs.protected_symlinks = 1 [2025-09-24 06:43:55.986] kernel.modules_disabled = 1 [2025-09-24 06:43:56.179] [2025-09-24 06:43:56.179] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:43:57.438] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:44:05.233] SBL1:1210.0.1.0 [2025-09-24 06:44:05.281] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:44:06.849] SBL2:1210.0.1.0 [2025-09-24 06:44:06.896] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:44:07.009] j-A [2025-09-24 06:44:14.382] The R5 Autosar Classic is running [2025-09-24 06:44:14.382] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:44:14.382] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:44:14.990] INIT: version 2.96 booting [2025-09-24 06:44:15.102] INIT: Entering runlevel: 5 [2025-09-24 06:44:15.262] mtd32 attached [2025-09-24 06:44:15.262] mtd24 attached [2025-09-24 06:44:15.278] mtd28 attached [2025-09-24 06:44:15.325] RTNETLINK answers: File exists [2025-09-24 06:44:15.373] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:44:15.373] ubi1:textures is mounted. [2025-09-24 06:44:15.373] ubi0:dml_code is mounted. [2025-09-24 06:44:15.373] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:44:15.373] ubi2:animations is mounted. [2025-09-24 06:44:15.373] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:44:15.373] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:44:15.373] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:44:15.394] data.LB_FadeInType0=100 [2025-09-24 06:44:15.394] data.CHLH_FadeInType0=0 [2025-09-24 06:44:15.394] data.WU_FadeInDelay=0 [2025-09-24 06:44:15.394] max_time_out=0 [2025-09-24 06:44:15.394] No splash screen [2025-09-24 06:44:15.394] stop dss Done [2025-09-24 06:44:15.473] /dev/mem opened. [2025-09-24 06:44:15.473] Memory mapped at address 0xffff9c359000. [2025-09-24 06:44:15.473] Read at address 0x00600018 (0xffff9c359018): 0x00000000 [2025-09-24 06:44:15.473] Write at address 0x00600018 (0xffff9c359018): 0x00400040, readback 0x00400040 [2025-09-24 06:44:15.473] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:44:15.473] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:44:15.586] Loaded PowerVR consumer services. [2025-09-24 06:44:15.745] Waiting data available... [2025-09-24 06:44:15.777] 512+0 records in [2025-09-24 06:44:15.777] 512+0 records out [2025-09-24 06:44:15.809] Starting syslogd/klogd: done [2025-09-24 06:44:15.825] DML Start [2025-09-24 06:44:16.033] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:44:16.226] DML res1: 0 [2025-09-24 06:44:16.673] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:44:16.689] Read Success [2025-09-24 06:44:16.689] Verifying certificate... [2025-09-24 06:44:16.945] Verified OK [2025-09-24 06:44:16.961] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:44:18.710] Verified OK [2025-09-24 06:44:18.710] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:44:19.285] Verified OK [2025-09-24 06:44:19.285] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:44:21.795] fs.protected_hardlinks = 1 [2025-09-24 06:44:21.825] fs.protected_symlinks = 1 [2025-09-24 06:44:21.825] kernel.modules_disabled = 1 [2025-09-24 06:44:22.001] [2025-09-24 06:44:22.001] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:44:23.270] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:44:31.044] SBL1:1210.0.1.0 [2025-09-24 06:44:31.092] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:44:32.658] SBL2:1210.0.1.0 [2025-09-24 06:44:32.706] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:44:32.818] j-A [2025-09-24 06:44:40.190] The R5 Autosar Classic is running [2025-09-24 06:44:40.190] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:44:40.190] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:44:40.798] INIT: version 2.96 booting [2025-09-24 06:44:40.911] INIT: Entering runlevel: 5 [2025-09-24 06:44:41.070] mtd32 attached [2025-09-24 06:44:41.086] mtd28 attached [2025-09-24 06:44:41.086] mtd24 attached [2025-09-24 06:44:41.134] RTNETLINK answers: File exists [2025-09-24 06:44:41.183] ubi1:animations is mounted. [2025-09-24 06:44:41.183] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:44:41.183] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:44:41.183] ubi2:textures is mounted. [2025-09-24 06:44:41.183] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:44:41.183] ubi0:dml_code is mounted. [2025-09-24 06:44:41.183] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:44:41.183] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:44:41.183] data.LB_FadeInType0=100 [2025-09-24 06:44:41.205] data.CHLH_FadeInType0=0 [2025-09-24 06:44:41.205] data.WU_FadeInDelay=0 [2025-09-24 06:44:41.205] max_time_out=0 [2025-09-24 06:44:41.205] No splash screen [2025-09-24 06:44:41.205] stop dss Done [2025-09-24 06:44:41.237] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:44:41.272] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:44:41.272] /dev/mem opened. [2025-09-24 06:44:41.272] Memory mapped at address 0xffff8451f000. [2025-09-24 06:44:41.272] Read at address 0x00600018 (0xffff8451f018): 0x00000000 [2025-09-24 06:44:41.272] Write at address 0x00600018 (0xffff8451f018): 0x00400040, readback 0x00400040 [2025-09-24 06:44:41.543] Loaded PowerVR consumer services. [2025-09-24 06:44:41.575] Waiting data available... [2025-09-24 06:44:41.590] 512+0 records in [2025-09-24 06:44:41.590] 512+0 records out [2025-09-24 06:44:41.623] Starting syslogd/klogd: done [2025-09-24 06:44:41.639] DML Start [2025-09-24 06:44:41.831] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:44:42.055] DML res1: 0 [2025-09-24 06:44:42.407] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:44:42.423] Read Success [2025-09-24 06:44:42.423] Verifying certificate... [2025-09-24 06:44:42.646] Verified OK [2025-09-24 06:44:42.662] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:44:44.316] Verified OK [2025-09-24 06:44:44.316] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:44:44.860] Verified OK [2025-09-24 06:44:44.860] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:44:47.371] fs.protected_hardlinks = 1 [2025-09-24 06:44:47.371] fs.protected_symlinks = 1 [2025-09-24 06:44:47.387] kernel.modules_disabled = 1 [2025-09-24 06:44:47.579] [2025-09-24 06:44:47.579] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:44:49.136] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:44:56.874] SBL1:1210.0.1.0 [2025-09-24 06:44:56.922] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:44:58.489] SBL2:1210.0.1.0 [2025-09-24 06:44:58.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:44:58.649] j-A [2025-09-24 06:45:06.020] The R5 Autosar Classic is running [2025-09-24 06:45:06.020] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:45:06.020] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:45:06.628] INIT: version 2.96 booting [2025-09-24 06:45:06.739] INIT: Entering runlevel: 5 [2025-09-24 06:45:06.884] mtd24 attached [2025-09-24 06:45:06.900] mtd28 attached [2025-09-24 06:45:06.916] mtd32 attached [2025-09-24 06:45:06.931] ubi0:textures is mounted. [2025-09-24 06:45:07.020] ubi1:animations is mounted. [2025-09-24 06:45:07.020] ubi2:dml_code is mounted. [2025-09-24 06:45:07.020] RTNETLINK answers: File exists [2025-09-24 06:45:07.020] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:45:07.020] data.LB_FadeInType0=100 [2025-09-24 06:45:07.020] data.CHLH_FadeInType0=0 [2025-09-24 06:45:07.020] data.WU_FadeInDelay=0 [2025-09-24 06:45:07.020] max_time_out=0 [2025-09-24 06:45:07.020] No splash screen [2025-09-24 06:45:07.020] stop dss Done [2025-09-24 06:45:07.020] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:45:07.020] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:45:07.020] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:45:07.020] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:45:07.052] /dev/mem opened. [2025-09-24 06:45:07.084] Memory mapped at address 0xffff9c265000. [2025-09-24 06:45:07.084] Read at address 0x00600018 (0xffff9c265018): 0x00000000 [2025-09-24 06:45:07.084] Write at address 0x00600018 (0xffff9c265018): 0x00400040, readback 0x00400040 [2025-09-24 06:45:07.108] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:45:07.108] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:45:07.205] Loaded PowerVR consumer services. [2025-09-24 06:45:07.380] Waiting data available... [2025-09-24 06:45:07.396] 512+0 records in [2025-09-24 06:45:07.396] 512+0 records out [2025-09-24 06:45:07.444] Starting syslogd/klogd: done [2025-09-24 06:45:07.460] DML Start [2025-09-24 06:45:07.636] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:45:07.860] DML res1: 0 [2025-09-24 06:45:08.228] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:45:08.244] Read Success [2025-09-24 06:45:08.244] Verifying certificate... [2025-09-24 06:45:08.499] Verified OK [2025-09-24 06:45:08.515] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:45:10.269] Verified OK [2025-09-24 06:45:10.269] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:45:10.842] Verified OK [2025-09-24 06:45:10.842] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:45:13.337] fs.protected_hardlinks = 1 [2025-09-24 06:45:13.337] fs.protected_symlinks = 1 [2025-09-24 06:45:13.353] kernel.modules_disabled = 1 [2025-09-24 06:45:13.561] [2025-09-24 06:45:13.561] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:45:14.917] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:45:22.664] SBL1:1210.0.1.0 [2025-09-24 06:45:22.696] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:45:24.278] SBL2:1210.0.1.0 [2025-09-24 06:45:24.326] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:45:24.422] j-A [2025-09-24 06:45:31.777] The R5 Autosar Classic is running [2025-09-24 06:45:31.800] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:45:31.800] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:45:32.407] INIT: version 2.96 booting [2025-09-24 06:45:32.518] INIT: Entering runlevel: 5 [2025-09-24 06:45:32.679] mtd32 attached [2025-09-24 06:45:32.679] mtd24 attached [2025-09-24 06:45:32.695] mtd28 attached [2025-09-24 06:45:32.743] ubi0:dml_code is mounted. [2025-09-24 06:45:32.743] RTNETLINK answers: File exists [2025-09-24 06:45:32.781] ubi1:textures is mounted. [2025-09-24 06:45:32.781] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:45:32.781] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:45:32.781] ubi2:animations is mounted. [2025-09-24 06:45:32.781] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:45:32.781] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:45:32.781] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:45:32.810] data.LB_FadeInType0=100 [2025-09-24 06:45:32.810] data.CHLH_FadeInType0=0 [2025-09-24 06:45:32.810] data.WU_FadeInDelay=0 [2025-09-24 06:45:32.810] max_time_out=0 [2025-09-24 06:45:32.810] No splash screen [2025-09-24 06:45:32.810] stop dss Done [2025-09-24 06:45:32.858] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:45:32.897] /dev/mem opened. [2025-09-24 06:45:32.897] Memory mapped at address 0xffff9b928000. [2025-09-24 06:45:32.897] Read at address 0x00600018 (0xffff9b928018): 0x00000000 [2025-09-24 06:45:32.897] Write at address 0x00600018 (0xffff9b928018): 0x00400040, readback 0x00400040 [2025-09-24 06:45:32.897] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:45:33.074] Loaded PowerVR consumer services. [2025-09-24 06:45:33.169] Waiting data available... [2025-09-24 06:45:33.185] 512+0 records in [2025-09-24 06:45:33.185] 512+0 records out [2025-09-24 06:45:33.217] Starting syslogd/klogd: done [2025-09-24 06:45:33.233] DML Start [2025-09-24 06:45:33.426] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:45:33.681] DML res1: 0 [2025-09-24 06:45:34.059] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:45:34.059] Read Success [2025-09-24 06:45:34.059] Verifying certificate... [2025-09-24 06:45:34.283] Verified OK [2025-09-24 06:45:34.299] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:45:36.021] Verified OK [2025-09-24 06:45:36.021] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:45:36.654] Verified OK [2025-09-24 06:45:36.654] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:45:39.324] fs.protected_hardlinks = 1 [2025-09-24 06:45:39.324] fs.protected_symlinks = 1 [2025-09-24 06:45:39.340] kernel.modules_disabled = 1 [2025-09-24 06:45:39.532] [2025-09-24 06:45:39.532] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:45:40.691] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:45:48.452] SBL1:1210.0.1.0 [2025-09-24 06:45:48.500] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:45:50.067] SBL2:1210.0.1.0 [2025-09-24 06:45:50.115] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:45:50.228] j-A [2025-09-24 06:45:57.566] The R5 Autosar Classic is running [2025-09-24 06:45:57.591] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:45:57.591] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:45:58.198] INIT: version 2.96 booting [2025-09-24 06:45:58.310] INIT: Entering runlevel: 5 [2025-09-24 06:45:58.470] mtd32 attached [2025-09-24 06:45:58.470] mtd28 attached [2025-09-24 06:45:58.486] mtd24 attached [2025-09-24 06:45:58.534] ubi0:dml_code is mounted. [2025-09-24 06:45:58.534] RTNETLINK answers: File exists [2025-09-24 06:45:58.574] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:45:58.574] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:45:58.574] ubi2:textures is mounted. [2025-09-24 06:45:58.574] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:45:58.574] ubi1:animations is mounted. [2025-09-24 06:45:58.574] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:45:58.574] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:45:58.600] data.LB_FadeInType0=100 [2025-09-24 06:45:58.600] data.CHLH_FadeInType0=0 [2025-09-24 06:45:58.600] data.WU_FadeInDelay=0 [2025-09-24 06:45:58.600] max_time_out=0 [2025-09-24 06:45:58.600] No splash screen [2025-09-24 06:45:58.600] stop dss Done [2025-09-24 06:45:58.616] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:45:58.631] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:45:58.648] /dev/mem opened. [2025-09-24 06:45:58.680] Memory mapped at address 0xffff88621000. [2025-09-24 06:45:58.680] Read at address 0x00600018 (0xffff88621018): 0x00000000 [2025-09-24 06:45:58.680] Write at address 0x00600018 (0xffff88621018): 0x00400040, readback 0x00400040 [2025-09-24 06:45:58.760] Loaded PowerVR consumer services. [2025-09-24 06:45:58.935] Waiting data available... [2025-09-24 06:45:58.952] 512+0 records in [2025-09-24 06:45:58.968] 512+0 records out [2025-09-24 06:45:59.000] Starting syslogd/klogd: done [2025-09-24 06:45:59.016] DML Start [2025-09-24 06:45:59.160] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:45:59.415] DML res1: 0 [2025-09-24 06:45:59.816] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:45:59.837] Read Success [2025-09-24 06:45:59.837] Verifying certificate... [2025-09-24 06:46:00.076] Verified OK [2025-09-24 06:46:00.092] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:46:01.744] Verified OK [2025-09-24 06:46:01.744] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:46:02.336] Verified OK [2025-09-24 06:46:02.352] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:46:03.119] 5452 GC [0] [2025-09-24 06:46:03.200] 5519 GC [1] [2025-09-24 06:46:03.279] 5592 GC [2] [2025-09-24 06:46:03.343] 5670 GC [3] [2025-09-24 06:46:03.407] 5731 GC [4] [2025-09-24 06:46:03.487] 5809 GC [5] [2025-09-24 06:46:03.567] 5883 GC [6] [2025-09-24 06:46:03.631] 5960 GC [7] [2025-09-24 06:46:03.711] 6031 GC [8] [2025-09-24 06:46:03.775] 6101 GC [9] [2025-09-24 06:46:03.855] 6179 GC [10] [2025-09-24 06:46:03.919] 6230 GC [11] [2025-09-24 06:46:03.983] 6300 GC [12] [2025-09-24 06:46:04.031] 6362 GC [13] [2025-09-24 06:46:04.094] 6419 GC [14] [2025-09-24 06:46:04.143] 6473 GC [15] [2025-09-24 06:46:04.207] 6529 GC [16] [2025-09-24 06:46:04.271] 6593 GC [17] [2025-09-24 06:46:04.335] 6651 GC [18] [2025-09-24 06:46:04.383] 6713 GC [19] [2025-09-24 06:46:04.446] 6771 GC [20] [2025-09-24 06:46:04.511] 6823 GC [21] [2025-09-24 06:46:04.559] 6891 GC [22] [2025-09-24 06:46:04.622] 6953 GC [23] [2025-09-24 06:46:04.671] 6999 GC [24] [2025-09-24 06:46:04.750] 7068 GC [25] [2025-09-24 06:46:04.814] 7130 GC [26] [2025-09-24 06:46:04.862] 7193 GC [27] [2025-09-24 06:46:04.926] 7261 GC [28] [2025-09-24 06:46:04.990] 7322 GC [29] [2025-09-24 06:46:05.006] GC DONE [2025-09-24 06:46:05.006] fs.protected_hardlinks = 1 [2025-09-24 06:46:05.023] fs.protected_symlinks = 1 [2025-09-24 06:46:05.023] kernel.modules_disabled = 1 [2025-09-24 06:46:05.214] [2025-09-24 06:46:05.214] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:46:06.420] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:46:14.251] SBL1:1210.0.1.0 [2025-09-24 06:46:14.283] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:46:15.867] SBL2:1210.0.1.0 [2025-09-24 06:46:15.899] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:46:16.011] j-A [2025-09-24 06:46:23.349] The R5 Autosar Classic is running [2025-09-24 06:46:23.380] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:46:23.380] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:46:23.988] INIT: version 2.96 booting [2025-09-24 06:46:24.099] INIT: Entering runlevel: 5 [2025-09-24 06:46:24.244] mtd24 attached [2025-09-24 06:46:24.260] mtd28 attached [2025-09-24 06:46:24.276] mtd32 attached [2025-09-24 06:46:24.308] ubi0:textures is mounted. [2025-09-24 06:46:24.324] RTNETLINK answers: File exists [2025-09-24 06:46:24.388] ubi1:animations is mounted. [2025-09-24 06:46:24.388] ubi2:dml_code is mounted. [2025-09-24 06:46:24.388] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:46:24.388] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:46:24.388] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:46:24.388] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:46:24.388] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:46:24.388] data.LB_FadeInType0=100 [2025-09-24 06:46:24.388] data.CHLH_FadeInType0=0 [2025-09-24 06:46:24.388] data.WU_FadeInDelay=0 [2025-09-24 06:46:24.388] max_time_out=0 [2025-09-24 06:46:24.388] No splash screen [2025-09-24 06:46:24.388] stop dss Done [2025-09-24 06:46:24.420] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:46:24.457] /dev/mem opened. [2025-09-24 06:46:24.457] Memory mapped at address 0xffffb1884000. [2025-09-24 06:46:24.457] Read at address 0x00600018 (0xffffb1884018): 0x00000000 [2025-09-24 06:46:24.457] Write at address 0x00600018 (0xffffb1884018): 0x00400040, readback 0x00400040 [2025-09-24 06:46:24.457] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:46:24.649] Loaded PowerVR consumer services. [2025-09-24 06:46:24.666] 512+0 records in [2025-09-24 06:46:24.666] 512+0 records out [2025-09-24 06:46:24.697] Starting syslogd/klogd: done [2025-09-24 06:46:24.730] Waiting data available... [2025-09-24 06:46:24.730] DML Start [2025-09-24 06:46:24.921] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:46:25.161] DML res1: 0 [2025-09-24 06:46:25.589] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:46:25.589] Read Success [2025-09-24 06:46:25.589] Verifying certificate... [2025-09-24 06:46:25.844] Verified OK [2025-09-24 06:46:25.876] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:46:27.555] Verified OK [2025-09-24 06:46:27.576] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:46:28.228] Verified OK [2025-09-24 06:46:28.228] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:46:30.864] fs.protected_hardlinks = 1 [2025-09-24 06:46:30.864] fs.protected_symlinks = 1 [2025-09-24 06:46:30.864] kernel.modules_disabled = 1 [2025-09-24 06:46:31.057] [2025-09-24 06:46:31.057] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:46:32.208] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:46:40.023] SBL1:1210.0.1.0 [2025-09-24 06:46:40.071] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:46:41.638] SBL2:1210.0.1.0 [2025-09-24 06:46:41.670] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:46:41.782] j-A [2025-09-24 06:46:49.156] The R5 Autosar Classic is running [2025-09-24 06:46:49.156] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:46:49.156] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:46:49.764] INIT: version 2.96 booting [2025-09-24 06:46:49.876] INIT: Entering runlevel: 5 [2025-09-24 06:46:50.036] mtd32 attached [2025-09-24 06:46:50.036] mtd24 attached [2025-09-24 06:46:50.052] mtd28 attached [2025-09-24 06:46:50.084] ubi0:dml_code is mounted. [2025-09-24 06:46:50.156] ubi1:textures is mounted. [2025-09-24 06:46:50.156] RTNETLINK answers: File exists [2025-09-24 06:46:50.156] ubi2:animations is mounted. [2025-09-24 06:46:50.156] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:46:50.156] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:46:50.156] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:46:50.156] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:46:50.156] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:46:50.156] data.LB_FadeInType0=100 [2025-09-24 06:46:50.156] data.CHLH_FadeInType0=0 [2025-09-24 06:46:50.156] data.WU_FadeInDelay=0 [2025-09-24 06:46:50.156] max_time_out=0 [2025-09-24 06:46:50.156] No splash screen [2025-09-24 06:46:50.156] stop dss Done [2025-09-24 06:46:50.188] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:46:50.224] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:46:50.224] /dev/mem opened. [2025-09-24 06:46:50.224] Memory mapped at address 0xffff8cab8000. [2025-09-24 06:46:50.224] Read at address 0x00600018 (0xffff8cab8018): 0x00000000 [2025-09-24 06:46:50.224] Write at address 0x00600018 (0xffff8cab8018): 0x00400040, readback 0x00400040 [2025-09-24 06:46:50.399] Loaded PowerVR consumer services. [2025-09-24 06:46:50.447] 512+0 records in [2025-09-24 06:46:50.447] 512+0 records out [2025-09-24 06:46:50.479] Waiting data available... [2025-09-24 06:46:50.496] Starting syslogd/klogd: done [2025-09-24 06:46:50.512] DML Start [2025-09-24 06:46:50.735] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:46:50.959] DML res1: 0 [2025-09-24 06:46:51.355] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:46:51.355] Read Success [2025-09-24 06:46:51.355] Verifying certificate... [2025-09-24 06:46:51.594] Verified OK [2025-09-24 06:46:51.610] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:46:53.317] Verified OK [2025-09-24 06:46:53.317] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:46:53.930] Verified OK [2025-09-24 06:46:53.930] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:46:56.488] fs.protected_hardlinks = 1 [2025-09-24 06:46:56.488] fs.protected_symlinks = 1 [2025-09-24 06:46:56.504] kernel.modules_disabled = 1 [2025-09-24 06:46:56.696] [2025-09-24 06:46:56.696] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:46:58.038] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:47:05.828] SBL1:1210.0.1.0 [2025-09-24 06:47:05.860] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:47:07.443] SBL2:1210.0.1.0 [2025-09-24 06:47:07.475] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:47:07.572] j-A [2025-09-24 06:47:14.927] The R5 Autosar Classic is running [2025-09-24 06:47:14.950] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:47:14.950] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:47:15.557] INIT: version 2.96 booting [2025-09-24 06:47:15.669] INIT: Entering runlevel: 5 [2025-09-24 06:47:15.828] mtd28 attached [2025-09-24 06:47:15.844] mtd32 attached [2025-09-24 06:47:15.844] mtd24 attached [2025-09-24 06:47:15.876] ubi0:animations is mounted. [2025-09-24 06:47:15.892] RTNETLINK answers: File exists [2025-09-24 06:47:15.949] ubi2:textures is mounted. [2025-09-24 06:47:15.949] ubi1:dml_code is mounted. [2025-09-24 06:47:15.949] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:47:15.949] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:47:15.949] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:47:15.949] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:47:15.949] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:47:15.949] data.LB_FadeInType0=100 [2025-09-24 06:47:15.949] data.CHLH_FadeInType0=0 [2025-09-24 06:47:15.949] data.WU_FadeInDelay=0 [2025-09-24 06:47:15.949] max_time_out=0 [2025-09-24 06:47:15.949] No splash screen [2025-09-24 06:47:15.949] stop dss Done [2025-09-24 06:47:15.997] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:47:15.997] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:47:16.029] /dev/mem opened. [2025-09-24 06:47:16.029] Memory mapped at address 0xffffa5c56000. [2025-09-24 06:47:16.029] Read at address 0x00600018 (0xffffa5c56018): 0x00000000 [2025-09-24 06:47:16.029] Write at address 0x00600018 (0xffffa5c56018): 0x00400040, readback 0x00400040 [2025-09-24 06:47:16.124] Loaded PowerVR consumer services. [2025-09-24 06:47:16.237] 512+0 records in [2025-09-24 06:47:16.237] 512+0 records out [2025-09-24 06:47:16.269] Waiting data available... [2025-09-24 06:47:16.285] Starting syslogd/klogd: done [2025-09-24 06:47:16.300] DML Start [2025-09-24 06:47:16.492] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:47:16.700] DML res1: 0 [2025-09-24 06:47:17.145] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:47:17.145] Read Success [2025-09-24 06:47:17.145] Verifying certificate... [2025-09-24 06:47:17.417] Verified OK [2025-09-24 06:47:17.432] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:47:19.000] Verified OK [2025-09-24 06:47:19.016] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:47:19.607] Verified OK [2025-09-24 06:47:19.607] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:47:22.341] fs.protected_hardlinks = 1 [2025-09-24 06:47:22.341] fs.protected_symlinks = 1 [2025-09-24 06:47:22.357] kernel.modules_disabled = 1 [2025-09-24 06:47:22.549] [2025-09-24 06:47:22.549] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:47:23.797] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:47:31.621] SBL1:1210.0.1.0 [2025-09-24 06:47:31.669] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:47:33.236] SBL2:1210.0.1.0 [2025-09-24 06:47:33.268] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:47:33.379] j-A [2025-09-24 06:47:40.750] The R5 Autosar Classic is running [2025-09-24 06:47:40.750] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:47:40.750] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:47:41.358] INIT: version 2.96 booting [2025-09-24 06:47:41.469] INIT: Entering runlevel: 5 [2025-09-24 06:47:41.629] mtd32 attached [2025-09-24 06:47:41.629] mtd24 attached [2025-09-24 06:47:41.661] mtd28 attached [2025-09-24 06:47:41.661] ubi0:dml_code is mounted. [2025-09-24 06:47:41.693] RTNETLINK answers: File exists [2025-09-24 06:47:41.693] ubi1:textures is mounted. [2025-09-24 06:47:41.726] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:47:41.726] ubi2:animations is mounted. [2025-09-24 06:47:41.726] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:47:41.726] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:47:41.726] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:47:41.726] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:47:41.761] data.LB_FadeInType0=100 [2025-09-24 06:47:41.761] data.CHLH_FadeInType0=0 [2025-09-24 06:47:41.761] data.WU_FadeInDelay=0 [2025-09-24 06:47:41.761] max_time_out=0 [2025-09-24 06:47:41.761] No splash screen [2025-09-24 06:47:41.761] stop dss Done [2025-09-24 06:47:41.777] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:47:41.799] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:47:41.849] /dev/mem opened. [2025-09-24 06:47:41.849] Memory mapped at address 0xffff935a2000. [2025-09-24 06:47:41.849] Read at address 0x00600018 (0xffff935a2018): 0x00000000 [2025-09-24 06:47:41.849] Write at address 0x00600018 (0xffff935a2018): 0x00400040, readback 0x00400040 [2025-09-24 06:47:41.960] Loaded PowerVR consumer services. [2025-09-24 06:47:42.025] 512+0 records in [2025-09-24 06:47:42.025] 512+0 records out [2025-09-24 06:47:42.041] Starting syslogd/klogd: done [2025-09-24 06:47:42.105] Waiting data available... [2025-09-24 06:47:42.105] DML Start [2025-09-24 06:47:42.281] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:47:42.472] DML res1: 0 [2025-09-24 06:47:42.949] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:47:42.949] Read Success [2025-09-24 06:47:42.949] Verifying certificate... [2025-09-24 06:47:43.237] Verified OK [2025-09-24 06:47:43.253] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:47:44.884] Verified OK [2025-09-24 06:47:44.884] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:47:45.537] Verified OK [2025-09-24 06:47:45.537] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:47:48.111] fs.protected_hardlinks = 1 [2025-09-24 06:47:48.111] fs.protected_symlinks = 1 [2025-09-24 06:47:48.127] kernel.modules_disabled = 1 [2025-09-24 06:47:48.334] [2025-09-24 06:47:48.334] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:47:49.568] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:47:57.449] SBL1:1210.0.1.0 [2025-09-24 06:47:57.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:47:59.063] SBL2:1210.0.1.0 [2025-09-24 06:47:59.095] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:47:59.207] j-A [2025-09-24 06:48:06.547] The R5 Autosar Classic is running [2025-09-24 06:48:06.572] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:48:06.572] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:48:07.179] INIT: version 2.96 booting [2025-09-24 06:48:07.291] INIT: Entering runlevel: 5 [2025-09-24 06:48:07.451] mtd28 attached [2025-09-24 06:48:07.467] mtd24 attached [2025-09-24 06:48:07.483] mtd32 attached [2025-09-24 06:48:07.499] ubi0:animations is mounted. [2025-09-24 06:48:07.515] ubi1:textures is mounted. [2025-09-24 06:48:07.531] RTNETLINK answers: File exists [2025-09-24 06:48:07.531] ubi2:dml_code is mounted. [2025-09-24 06:48:07.592] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:48:07.592] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:48:07.592] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:48:07.592] data.LB_FadeInType0=100 [2025-09-24 06:48:07.592] data.CHLH_FadeInType0=0 [2025-09-24 06:48:07.592] data.WU_FadeInDelay=0 [2025-09-24 06:48:07.592] max_time_out=0 [2025-09-24 06:48:07.592] No splash screen [2025-09-24 06:48:07.592] stop dss Done [2025-09-24 06:48:07.592] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:48:07.592] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:48:07.658] /dev/mem opened. [2025-09-24 06:48:07.658] Memory mapped at address 0xffffa617f000. [2025-09-24 06:48:07.658] Read at address 0x00600018 (0xffffa617f018): 0x00000000 [2025-09-24 06:48:07.658] Write at address 0x00600018 (0xffffa617f018): 0x00400040, readback 0x00400040 [2025-09-24 06:48:07.722] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:48:07.722] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:48:07.802] Loaded PowerVR consumer services. [2025-09-24 06:48:07.882] 512+0 records in [2025-09-24 06:48:07.882] 512+0 records out [2025-09-24 06:48:07.914] Waiting data available... [2025-09-24 06:48:07.930] Starting syslogd/klogd: done [2025-09-24 06:48:07.946] DML Start [2025-09-24 06:48:08.138] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:48:08.361] DML res1: 0 [2025-09-24 06:48:08.729] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:48:08.729] Read Success [2025-09-24 06:48:08.745] Verifying certificate... [2025-09-24 06:48:08.985] Verified OK [2025-09-24 06:48:09.001] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:48:10.614] Verified OK [2025-09-24 06:48:10.614] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:48:11.254] Verified OK [2025-09-24 06:48:11.254] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:48:13.988] fs.protected_hardlinks = 1 [2025-09-24 06:48:14.004] fs.protected_symlinks = 1 [2025-09-24 06:48:14.004] kernel.modules_disabled = 1 [2025-09-24 06:48:14.196] [2025-09-24 06:48:14.196] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:48:15.441] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:48:23.245] SBL1:1210.0.1.0 [2025-09-24 06:48:23.293] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:48:24.860] SBL2:1210.0.1.0 [2025-09-24 06:48:24.908] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:48:25.004] j-A [2025-09-24 06:48:32.360] The R5 Autosar Classic is running [2025-09-24 06:48:32.360] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:48:32.381] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:48:32.989] INIT: version 2.96 booting [2025-09-24 06:48:33.101] INIT: Entering runlevel: 5 [2025-09-24 06:48:33.245] mtd24 attached [2025-09-24 06:48:33.261] mtd28 attached [2025-09-24 06:48:33.277] mtd32 attached [2025-09-24 06:48:33.293] ubi0:textures is mounted. [2025-09-24 06:48:33.325] ubi1:animations is mounted. [2025-09-24 06:48:33.325] RTNETLINK answers: File exists [2025-09-24 06:48:33.382] ubi2:dml_code is mounted. [2025-09-24 06:48:33.382] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:48:33.382] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:48:33.382] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:48:33.382] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:48:33.382] data.LB_FadeInType0=100 [2025-09-24 06:48:33.382] data.CHLH_FadeInType0=0 [2025-09-24 06:48:33.382] data.WU_FadeInDelay=0 [2025-09-24 06:48:33.382] max_time_out=0 [2025-09-24 06:48:33.382] No splash screen [2025-09-24 06:48:33.382] stop dss Done [2025-09-24 06:48:33.382] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:48:33.449] /dev/mem opened. [2025-09-24 06:48:33.449] Memory mapped at address 0xffff7fda5000. [2025-09-24 06:48:33.449] Read at address 0x00600018 (0xffff7fda5018): 0x00000000 [2025-09-24 06:48:33.449] Write at address 0x00600018 (0xffff7fda5018): 0x00400040, readback 0x00400040 [2025-09-24 06:48:33.449] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:48:33.465] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:48:33.545] Loaded PowerVR consumer services. [2025-09-24 06:48:33.697] Waiting data available... [2025-09-24 06:48:33.697] 512+0 records in [2025-09-24 06:48:33.697] 512+0 records out [2025-09-24 06:48:33.730] Starting syslogd/klogd: done [2025-09-24 06:48:33.746] DML Start [2025-09-24 06:48:33.937] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:48:34.161] DML res1: 0 [2025-09-24 06:48:34.614] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:48:34.614] Read Success [2025-09-24 06:48:34.614] Verifying certificate... [2025-09-24 06:48:34.870] Verified OK [2025-09-24 06:48:34.870] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:48:36.525] Verified OK [2025-09-24 06:48:36.525] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:48:37.145] Verified OK [2025-09-24 06:48:37.146] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:48:39.719] fs.protected_hardlinks = 1 [2025-09-24 06:48:39.735] fs.protected_symlinks = 1 [2025-09-24 06:48:39.735] kernel.modules_disabled = 1 [2025-09-24 06:48:39.927] [2025-09-24 06:48:39.927] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:48:41.266] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:48:49.070] SBL1:1210.0.1.0 [2025-09-24 06:48:49.102] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:48:50.686] SBL2:1210.0.1.0 [2025-09-24 06:48:50.717] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:48:50.829] j-A [2025-09-24 06:48:58.169] The R5 Autosar Classic is running [2025-09-24 06:48:58.194] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:48:58.194] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:48:58.802] INIT: version 2.96 booting [2025-09-24 06:48:58.913] INIT: Entering runlevel: 5 [2025-09-24 06:48:59.074] mtd24 attached [2025-09-24 06:48:59.074] mtd28 attached [2025-09-24 06:48:59.090] mtd32 attached [2025-09-24 06:48:59.122] ubi0:textures is mounted. [2025-09-24 06:48:59.199] RTNETLINK answers: File exists [2025-09-24 06:48:59.199] ubi1:animations is mounted. [2025-09-24 06:48:59.199] ubi2:dml_code is mounted. [2025-09-24 06:48:59.199] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:48:59.199] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:48:59.199] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:48:59.199] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:48:59.199] data.LB_FadeInType0=100 [2025-09-24 06:48:59.199] data.CHLH_FadeInType0=0 [2025-09-24 06:48:59.199] data.WU_FadeInDelay=0 [2025-09-24 06:48:59.199] max_time_out=0 [2025-09-24 06:48:59.199] No splash screen [2025-09-24 06:48:59.199] stop dss Done [2025-09-24 06:48:59.199] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:48:59.276] /dev/mem opened. [2025-09-24 06:48:59.276] Memory mapped at address 0xffff92fd4000. [2025-09-24 06:48:59.276] Read at address 0x00600018 (0xffff92fd4018): 0x00000000 [2025-09-24 06:48:59.276] Write at address 0x00600018 (0xffff92fd4018): 0x00400040, readback 0x00400040 [2025-09-24 06:48:59.276] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:48:59.276] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:48:59.389] Loaded PowerVR consumer services. [2025-09-24 06:48:59.500] Waiting data available... [2025-09-24 06:48:59.516] 512+0 records in [2025-09-24 06:48:59.516] 512+0 records out [2025-09-24 06:48:59.548] Starting syslogd/klogd: done [2025-09-24 06:48:59.564] DML Start [2025-09-24 06:48:59.757] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:48:59.964] DML res1: 0 [2025-09-24 06:49:00.395] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:49:00.395] Read Success [2025-09-24 06:49:00.395] Verifying certificate... [2025-09-24 06:49:00.667] Verified OK [2025-09-24 06:49:00.683] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:49:02.417] Verified OK [2025-09-24 06:49:02.417] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:49:02.976] Verified OK [2025-09-24 06:49:02.976] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:49:05.679] fs.protected_hardlinks = 1 [2025-09-24 06:49:05.695] fs.protected_symlinks = 1 [2025-09-24 06:49:05.695] kernel.modules_disabled = 1 [2025-09-24 06:49:05.903] [2025-09-24 06:49:05.903] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:49:07.077] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:49:14.876] SBL1:1210.0.1.0 [2025-09-24 06:49:14.924] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:49:16.490] SBL2:1210.0.1.0 [2025-09-24 06:49:16.538] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:49:16.634] j-A [2025-09-24 06:49:23.989] The R5 Autosar Classic is running [2025-09-24 06:49:23.989] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:49:24.011] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:49:24.618] INIT: version 2.96 booting [2025-09-24 06:49:24.730] INIT: Entering runlevel: 5 [2025-09-24 06:49:24.874] mtd24 attached [2025-09-24 06:49:24.890] mtd32 attached [2025-09-24 06:49:24.906] mtd28 attached [2025-09-24 06:49:24.938] ubi0:textures is mounted. [2025-09-24 06:49:24.954] RTNETLINK answers: File exists [2025-09-24 06:49:24.954] ubi1:dml_code is mounted. [2025-09-24 06:49:25.017] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:49:25.017] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:49:25.017] ubi2:animations is mounted. [2025-09-24 06:49:25.017] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:49:25.017] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:49:25.017] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:49:25.017] data.LB_FadeInType0=100 [2025-09-24 06:49:25.017] data.CHLH_FadeInType0=0 [2025-09-24 06:49:25.017] data.WU_FadeInDelay=0 [2025-09-24 06:49:25.017] max_time_out=0 [2025-09-24 06:49:25.017] No splash screen [2025-09-24 06:49:25.017] stop dss Done [2025-09-24 06:49:25.103] /dev/mem opened. [2025-09-24 06:49:25.103] Memory mapped at address 0xffffb919b000. [2025-09-24 06:49:25.103] Read at address 0x00600018 (0xffffb919b018): 0x00000000 [2025-09-24 06:49:25.103] Write at address 0x00600018 (0xffffb919b018): 0x00400040, readback 0x00400040 [2025-09-24 06:49:25.103] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:49:25.103] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:49:25.278] Loaded PowerVR consumer services. [2025-09-24 06:49:25.310] 512+0 records in [2025-09-24 06:49:25.310] 512+0 records out [2025-09-24 06:49:25.342] Waiting data available... [2025-09-24 06:49:25.342] Starting syslogd/klogd: done [2025-09-24 06:49:25.374] DML Start [2025-09-24 06:49:25.534] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:49:25.742] DML res1: 0 [2025-09-24 06:49:26.267] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:49:26.267] Read Success [2025-09-24 06:49:26.267] Verifying certificate... [2025-09-24 06:49:26.523] Verified OK [2025-09-24 06:49:26.539] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:49:28.304] Verified OK [2025-09-24 06:49:28.304] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:49:28.896] Verified OK [2025-09-24 06:49:28.896] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:49:31.434] fs.protected_hardlinks = 1 [2025-09-24 06:49:31.434] fs.protected_symlinks = 1 [2025-09-24 06:49:31.434] kernel.modules_disabled = 1 [2025-09-24 06:49:31.626] [2025-09-24 06:49:31.626] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:49:32.880] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:49:40.690] SBL1:1210.0.1.0 [2025-09-24 06:49:40.722] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:49:42.305] SBL2:1210.0.1.0 [2025-09-24 06:49:42.337] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:49:42.449] j-A [2025-09-24 06:49:49.788] The R5 Autosar Classic is running [2025-09-24 06:49:49.813] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:49:49.813] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:49:50.421] INIT: version 2.96 booting [2025-09-24 06:49:50.532] INIT: Entering runlevel: 5 [2025-09-24 06:49:50.693] mtd24 attached [2025-09-24 06:49:50.709] mtd32 attached [2025-09-24 06:49:50.725] ubi0:textures is mounted. [2025-09-24 06:49:50.741] mtd28 attached [2025-09-24 06:49:50.741] ubi1:dml_code is mounted. [2025-09-24 06:49:50.824] RTNETLINK answers: File exists [2025-09-24 06:49:50.824] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:49:50.824] ubi2:animations is mounted. [2025-09-24 06:49:50.824] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:49:50.824] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:49:50.824] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:49:50.824] data.LB_FadeInType0=100 [2025-09-24 06:49:50.824] data.CHLH_FadeInType0=0 [2025-09-24 06:49:50.824] data.WU_FadeInDelay=0 [2025-09-24 06:49:50.824] max_time_out=0 [2025-09-24 06:49:50.824] No splash screen [2025-09-24 06:49:50.824] stop dss Done [2025-09-24 06:49:50.824] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:49:50.904] /dev/mem opened. [2025-09-24 06:49:50.904] Memory mapped at address 0xffff8047f000. [2025-09-24 06:49:50.904] Read at address 0x00600018 (0xffff8047f018): 0x00000000 [2025-09-24 06:49:50.904] Write at address 0x00600018 (0xffff8047f018): 0x00400040, readback 0x00400040 [2025-09-24 06:49:50.904] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:49:50.904] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:49:51.080] Loaded PowerVR consumer services. [2025-09-24 06:49:51.112] 512+0 records in [2025-09-24 06:49:51.112] 512+0 records out [2025-09-24 06:49:51.128] Waiting data available... [2025-09-24 06:49:51.161] Starting syslogd/klogd: done [2025-09-24 06:49:51.177] DML Start [2025-09-24 06:49:51.368] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:49:51.592] DML res1: 0 [2025-09-24 06:49:52.036] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:49:52.036] Read Success [2025-09-24 06:49:52.036] Verifying certificate... [2025-09-24 06:49:52.307] Verified OK [2025-09-24 06:49:52.323] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:49:54.076] Verified OK [2025-09-24 06:49:54.076] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:49:54.690] Verified OK [2025-09-24 06:49:54.690] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:49:57.265] fs.protected_hardlinks = 1 [2025-09-24 06:49:57.265] fs.protected_symlinks = 1 [2025-09-24 06:49:57.280] kernel.modules_disabled = 1 [2025-09-24 06:49:57.472] [2025-09-24 06:49:57.472] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:49:58.682] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:50:06.481] SBL1:1210.0.1.0 [2025-09-24 06:50:06.529] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:50:08.095] SBL2:1210.0.1.0 [2025-09-24 06:50:08.127] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:50:08.240] j-A [2025-09-24 06:50:15.613] The R5 Autosar Classic is running [2025-09-24 06:50:15.613] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:50:15.613] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:50:16.221] INIT: version 2.96 booting [2025-09-24 06:50:16.333] INIT: Entering runlevel: 5 [2025-09-24 06:50:16.477] mtd28 attached [2025-09-24 06:50:16.493] mtd24 attached [2025-09-24 06:50:16.508] mtd32 attached [2025-09-24 06:50:16.556] RTNETLINK answers: File exists [2025-09-24 06:50:16.557] ubi0:animations is mounted. [2025-09-24 06:50:16.623] ubi1:textures is mounted. [2025-09-24 06:50:16.623] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:50:16.623] ubi2:dml_code is mounted. [2025-09-24 06:50:16.623] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:50:16.623] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:50:16.623] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:50:16.623] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:50:16.623] data.LB_FadeInType0=100 [2025-09-24 06:50:16.623] data.CHLH_FadeInType0=0 [2025-09-24 06:50:16.623] data.WU_FadeInDelay=0 [2025-09-24 06:50:16.623] max_time_out=0 [2025-09-24 06:50:16.623] No splash screen [2025-09-24 06:50:16.623] stop dss Done [2025-09-24 06:50:16.639] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:50:16.671] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:50:16.671] /dev/mem opened. [2025-09-24 06:50:16.703] Memory mapped at address 0xffffa30e1000. [2025-09-24 06:50:16.703] Read at address 0x00600018 (0xffffa30e1018): 0x00000000 [2025-09-24 06:50:16.703] Write at address 0x00600018 (0xffffa30e1018): 0x00400040, readback 0x00400040 [2025-09-24 06:50:16.879] Loaded PowerVR consumer services. [2025-09-24 06:50:16.911] 512+0 records in [2025-09-24 06:50:16.911] 512+0 records out [2025-09-24 06:50:16.975] Starting syslogd/klogd: Waiting data available... [2025-09-24 06:50:16.991] done [2025-09-24 06:50:16.991] DML Start [2025-09-24 06:50:17.183] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:50:17.406] DML res1: 0 [2025-09-24 06:50:17.853] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:50:17.853] Read Success [2025-09-24 06:50:17.853] Verifying certificate... [2025-09-24 06:50:18.109] Verified OK [2025-09-24 06:50:18.125] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:50:19.755] Verified OK [2025-09-24 06:50:19.755] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:50:20.368] Verified OK [2025-09-24 06:50:20.368] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:50:23.118] fs.protected_hardlinks = 1 [2025-09-24 06:50:23.134] fs.protected_symlinks = 1 [2025-09-24 06:50:23.134] kernel.modules_disabled = 1 [2025-09-24 06:50:23.342] [2025-09-24 06:50:23.342] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:50:24.499] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:50:32.286] SBL1:1210.0.1.0 [2025-09-24 06:50:32.334] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:50:33.900] SBL2:1210.0.1.0 [2025-09-24 06:50:33.933] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:50:34.045] j-A [2025-09-24 06:50:41.399] The R5 Autosar Classic is running [2025-09-24 06:50:41.399] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:50:41.420] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:50:42.028] INIT: version 2.96 booting [2025-09-24 06:50:42.139] INIT: Entering runlevel: 5 [2025-09-24 06:50:42.300] mtd28 attached [2025-09-24 06:50:42.300] mtd24 attached [2025-09-24 06:50:42.316] mtd32 attached [2025-09-24 06:50:42.363] RTNETLINK answers: File exists [2025-09-24 06:50:42.429] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:50:42.429] ubi1:textures is mounted. [2025-09-24 06:50:42.429] ubi0:animations is mounted. [2025-09-24 06:50:42.429] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:50:42.429] ubi2:dml_code is mounted. [2025-09-24 06:50:42.429] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:50:42.429] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:50:42.429] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:50:42.429] data.LB_FadeInType0=100 [2025-09-24 06:50:42.429] data.CHLH_FadeInType0=0 [2025-09-24 06:50:42.429] data.WU_FadeInDelay=0 [2025-09-24 06:50:42.429] max_time_out=0 [2025-09-24 06:50:42.429] No splash screen [2025-09-24 06:50:42.429] stop dss Done [2025-09-24 06:50:42.445] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:50:42.461] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:50:42.518] /dev/mem opened. [2025-09-24 06:50:42.518] Memory mapped at address 0xffffa172e000. [2025-09-24 06:50:42.518] Read at address 0x00600018 (0xffffa172e018): 0x00000000 [2025-09-24 06:50:42.518] Write at address 0x00600018 (0xffffa172e018): 0x00400040, readback 0x00400040 [2025-09-24 06:50:42.646] Loaded PowerVR consumer services. [2025-09-24 06:50:42.726] 512+0 records in [2025-09-24 06:50:42.726] 512+0 records out [2025-09-24 06:50:42.742] Waiting data available... [2025-09-24 06:50:42.774] Starting syslogd/klogd: done [2025-09-24 06:50:42.790] DML Start [2025-09-24 06:50:42.950] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:50:43.190] DML res1: 0 [2025-09-24 06:50:43.637] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:50:43.653] Read Success [2025-09-24 06:50:43.653] Verifying certificate... [2025-09-24 06:50:43.893] Verified OK [2025-09-24 06:50:43.909] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:50:45.764] Verified OK [2025-09-24 06:50:45.764] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:50:46.316] Verified OK [2025-09-24 06:50:46.316] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:50:48.730] fs.protected_hardlinks = 1 [2025-09-24 06:50:48.746] fs.protected_symlinks = 1 [2025-09-24 06:50:48.746] kernel.modules_disabled = 1 [2025-09-24 06:50:48.954] [2025-09-24 06:50:48.954] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:50:50.287] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:50:58.074] SBL1:1210.0.1.0 [2025-09-24 06:50:58.122] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:50:59.688] SBL2:1210.0.1.0 [2025-09-24 06:50:59.736] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:50:59.832] j-A [2025-09-24 06:51:07.187] The R5 Autosar Classic is running [2025-09-24 06:51:07.210] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:51:07.210] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:51:07.817] INIT: version 2.96 booting [2025-09-24 06:51:07.929] INIT: Entering runlevel: 5 [2025-09-24 06:51:08.089] mtd32 attached [2025-09-24 06:51:08.089] mtd28 attached [2025-09-24 06:51:08.105] mtd24 attached [2025-09-24 06:51:08.153] RTNETLINK answers: File exists [2025-09-24 06:51:08.153] ubi1:animations is mounted. [2025-09-24 06:51:08.196] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:51:08.196] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:51:08.196] ubi0:dml_code is mounted. [2025-09-24 06:51:08.196] ubi2:textures is mounted. [2025-09-24 06:51:08.196] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:51:08.196] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:51:08.196] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:51:08.217] data.LB_FadeInType0=100 [2025-09-24 06:51:08.217] data.CHLH_FadeInType0=0 [2025-09-24 06:51:08.217] data.WU_FadeInDelay=0 [2025-09-24 06:51:08.217] max_time_out=0 [2025-09-24 06:51:08.217] No splash screen [2025-09-24 06:51:08.217] stop dss Done [2025-09-24 06:51:08.233] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:51:08.257] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:51:08.306] /dev/mem opened. [2025-09-24 06:51:08.306] Memory mapped at address 0xffff9dbf2000. [2025-09-24 06:51:08.306] Read at address 0x00600018 (0xffff9dbf2018): 0x00000000 [2025-09-24 06:51:08.306] Write at address 0x00600018 (0xffff9dbf2018): 0x00400040, readback 0x00400040 [2025-09-24 06:51:08.450] Loaded PowerVR consumer services. [2025-09-24 06:51:08.514] 512+0 records in [2025-09-24 06:51:08.514] 512+0 records out [2025-09-24 06:51:08.530] Waiting data available... [2025-09-24 06:51:08.561] Starting syslogd/klogd: done [2025-09-24 06:51:08.577] DML Start [2025-09-24 06:51:08.770] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:51:08.993] DML res1: 0 [2025-09-24 06:51:09.486] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:51:09.486] Read Success [2025-09-24 06:51:09.486] Verifying certificate... [2025-09-24 06:51:09.710] Verified OK [2025-09-24 06:51:09.726] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:51:11.388] Verified OK [2025-09-24 06:51:11.409] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:51:12.033] Verified OK [2025-09-24 06:51:12.049] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:51:14.688] fs.protected_hardlinks = 1 [2025-09-24 06:51:14.688] fs.protected_symlinks = 1 [2025-09-24 06:51:14.703] kernel.modules_disabled = 1 [2025-09-24 06:51:14.896] [2025-09-24 06:51:14.896] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:51:16.090] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:51:23.872] SBL1:1210.0.1.0 [2025-09-24 06:51:23.920] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:51:25.486] SBL2:1210.0.1.0 [2025-09-24 06:51:25.518] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:51:25.630] j-A [2025-09-24 06:51:33.003] The R5 Autosar Classic is running [2025-09-24 06:51:33.003] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:51:33.003] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:51:33.610] INIT: version 2.96 booting [2025-09-24 06:51:33.722] INIT: Entering runlevel: 5 [2025-09-24 06:51:33.881] mtd24 attached [2025-09-24 06:51:33.881] mtd28 attached [2025-09-24 06:51:33.898] mtd32 attached [2025-09-24 06:51:33.946] ubi0:textures is mounted. [2025-09-24 06:51:33.946] RTNETLINK answers: File exists [2025-09-24 06:51:34.008] ubi1:animations is mounted. [2025-09-24 06:51:34.008] ubi2:dml_code is mounted. [2025-09-24 06:51:34.008] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:51:34.008] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:51:34.008] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:51:34.008] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:51:34.008] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:51:34.008] data.LB_FadeInType0=100 [2025-09-24 06:51:34.008] data.CHLH_FadeInType0=0 [2025-09-24 06:51:34.008] data.WU_FadeInDelay=0 [2025-09-24 06:51:34.008] max_time_out=0 [2025-09-24 06:51:34.008] No splash screen [2025-09-24 06:51:34.008] stop dss Done [2025-09-24 06:51:34.080] /dev/mem opened. [2025-09-24 06:51:34.080] Memory mapped at address 0xffff85fe4000. [2025-09-24 06:51:34.080] Read at address 0x00600018 (0xffff85fe4018): 0x00000000 [2025-09-24 06:51:34.080] Write at address 0x00600018 (0xffff85fe4018): 0x00400040, readback 0x00400040 [2025-09-24 06:51:34.110] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:51:34.110] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:51:34.190] Loaded PowerVR consumer services. [2025-09-24 06:51:34.301] 512+0 records in [2025-09-24 06:51:34.301] 512+0 records out [2025-09-24 06:51:34.317] Waiting data available... [2025-09-24 06:51:34.349] Starting syslogd/klogd: done [2025-09-24 06:51:34.365] DML Start [2025-09-24 06:51:34.557] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:51:34.798] DML res1: 0 [2025-09-24 06:51:35.188] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:51:35.188] Read Success [2025-09-24 06:51:35.188] Verifying certificate... [2025-09-24 06:51:35.428] Verified OK [2025-09-24 06:51:35.444] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:51:36.961] Verified OK [2025-09-24 06:51:36.961] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:51:37.592] Verified OK [2025-09-24 06:51:37.592] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:51:40.342] fs.protected_hardlinks = 1 [2025-09-24 06:51:40.342] fs.protected_symlinks = 1 [2025-09-24 06:51:40.358] kernel.modules_disabled = 1 [2025-09-24 06:51:40.535] [2025-09-24 06:51:40.535] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:51:41.878] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:51:49.682] SBL1:1210.0.1.0 [2025-09-24 06:51:49.729] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:51:51.296] SBL2:1210.0.1.0 [2025-09-24 06:51:51.328] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:51:51.439] j-A [2025-09-24 06:51:58.814] The R5 Autosar Classic is running [2025-09-24 06:51:58.814] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:51:58.814] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:51:59.422] INIT: version 2.96 booting [2025-09-24 06:51:59.533] INIT: Entering runlevel: 5 [2025-09-24 06:51:59.678] mtd24 attached [2025-09-24 06:51:59.694] mtd28 attached [2025-09-24 06:51:59.710] mtd32 attached [2025-09-24 06:51:59.757] ubi0:textures is mounted. [2025-09-24 06:51:59.757] RTNETLINK answers: File exists [2025-09-24 06:51:59.818] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:51:59.818] ubi2:dml_code is mounted. [2025-09-24 06:51:59.818] ubi1:animations is mounted. [2025-09-24 06:51:59.818] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:51:59.818] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:51:59.818] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:51:59.818] data.LB_FadeInType0=100 [2025-09-24 06:51:59.818] data.CHLH_FadeInType0=0 [2025-09-24 06:51:59.818] data.WU_FadeInDelay=0 [2025-09-24 06:51:59.818] max_time_out=0 [2025-09-24 06:51:59.818] No splash screen [2025-09-24 06:51:59.818] stop dss Done [2025-09-24 06:51:59.818] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:51:59.892] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:51:59.892] /dev/mem opened. [2025-09-24 06:51:59.892] Memory mapped at address 0xffffad7f1000. [2025-09-24 06:51:59.892] Read at address 0x00600018 (0xffffad7f1018): 0x00000000 [2025-09-24 06:51:59.892] Write at address 0x00600018 (0xffffad7f1018): 0x00400040, readback 0x00400040 [2025-09-24 06:51:59.892] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:51:59.988] Loaded PowerVR consumer services. [2025-09-24 06:52:00.116] 512+0 records in [2025-09-24 06:52:00.132] 512+0 records out [2025-09-24 06:52:00.132] Waiting data available... [2025-09-24 06:52:00.164] Starting syslogd/klogd: done [2025-09-24 06:52:00.180] DML Start [2025-09-24 06:52:00.372] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:52:00.596] DML res1: 0 [2025-09-24 06:52:01.048] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:52:01.048] Read Success [2025-09-24 06:52:01.048] Verifying certificate... [2025-09-24 06:52:01.304] Verified OK [2025-09-24 06:52:01.320] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:52:03.044] Verified OK [2025-09-24 06:52:03.044] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:52:03.572] Verified OK [2025-09-24 06:52:03.572] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:52:06.146] fs.protected_hardlinks = 1 [2025-09-24 06:52:06.162] fs.protected_symlinks = 1 [2025-09-24 06:52:06.162] kernel.modules_disabled = 1 [2025-09-24 06:52:06.354] [2025-09-24 06:52:06.354] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:52:07.695] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:52:15.481] SBL1:1210.0.1.0 [2025-09-24 06:52:15.513] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:52:17.096] SBL2:1210.0.1.0 [2025-09-24 06:52:17.128] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:52:17.223] j-A [2025-09-24 06:52:24.580] The R5 Autosar Classic is running [2025-09-24 06:52:24.603] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:52:24.603] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:52:25.210] INIT: version 2.96 booting [2025-09-24 06:52:25.322] INIT: Entering runlevel: 5 [2025-09-24 06:52:25.482] mtd32 attached [2025-09-24 06:52:25.482] mtd28 attached [2025-09-24 06:52:25.497] mtd24 attached [2025-09-24 06:52:25.545] RTNETLINK answers: File exists [2025-09-24 06:52:25.590] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:52:25.590] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:52:25.590] ubi2:textures is mounted. [2025-09-24 06:52:25.590] ubi0:dml_code is mounted. [2025-09-24 06:52:25.590] ubi1:animations is mounted. [2025-09-24 06:52:25.590] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:52:25.590] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:52:25.590] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:52:25.590] data.LB_FadeInType0=100 [2025-09-24 06:52:25.611] data.CHLH_FadeInType0=0 [2025-09-24 06:52:25.611] data.WU_FadeInDelay=0 [2025-09-24 06:52:25.611] max_time_out=0 [2025-09-24 06:52:25.611] No splash screen [2025-09-24 06:52:25.611] stop dss Done [2025-09-24 06:52:25.628] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:52:25.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:52:25.660] /dev/mem opened. [2025-09-24 06:52:25.660] Memory mapped at address 0xffff959a7000. [2025-09-24 06:52:25.686] Read at address 0x00600018 (0xffff959a7018): 0x00000000 [2025-09-24 06:52:25.686] Write at address 0x00600018 (0xffff959a7018): 0x00400040, readback 0x00400040 [2025-09-24 06:52:25.765] Loaded PowerVR consumer services. [2025-09-24 06:52:25.909] 512+0 records in [2025-09-24 06:52:25.909] 512+0 records out [2025-09-24 06:52:25.909] Waiting data available... [2025-09-24 06:52:25.957] Starting syslogd/klogd: done [2025-09-24 06:52:25.974] DML Start [2025-09-24 06:52:26.134] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:52:26.373] DML res1: 0 [2025-09-24 06:52:26.843] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:52:26.843] Read Success [2025-09-24 06:52:26.843] Verifying certificate... [2025-09-24 06:52:27.130] Verified OK [2025-09-24 06:52:27.146] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:52:28.804] Verified OK [2025-09-24 06:52:28.804] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:52:29.390] Verified OK [2025-09-24 06:52:29.390] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:52:32.044] fs.protected_hardlinks = 1 [2025-09-24 06:52:32.044] fs.protected_symlinks = 1 [2025-09-24 06:52:32.060] kernel.modules_disabled = 1 [2025-09-24 06:52:32.251] [2025-09-24 06:52:32.251] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:52:33.435] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:52:41.273] SBL1:1210.0.1.0 [2025-09-24 06:52:41.305] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:52:42.888] SBL2:1210.0.1.0 [2025-09-24 06:52:42.920] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:52:43.031] j-A [2025-09-24 06:52:50.371] The R5 Autosar Classic is running [2025-09-24 06:52:50.403] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:52:50.403] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:52:51.010] INIT: version 2.96 booting [2025-09-24 06:52:51.122] INIT: Entering runlevel: 5 [2025-09-24 06:52:51.265] mtd24 attached [2025-09-24 06:52:51.281] mtd28 attached [2025-09-24 06:52:51.297] mtd32 attached [2025-09-24 06:52:51.314] ubi0:textures is mounted. [2025-09-24 06:52:51.346] RTNETLINK answers: File exists [2025-09-24 06:52:51.396] ubi1:animations is mounted. [2025-09-24 06:52:51.396] ubi2:dml_code is mounted. [2025-09-24 06:52:51.396] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:52:51.396] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:52:51.396] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:52:51.396] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:52:51.396] data.LB_FadeInType0=100 [2025-09-24 06:52:51.396] data.CHLH_FadeInType0=0 [2025-09-24 06:52:51.396] data.WU_FadeInDelay=0 [2025-09-24 06:52:51.396] max_time_out=0 [2025-09-24 06:52:51.396] No splash screen [2025-09-24 06:52:51.396] stop dss Done [2025-09-24 06:52:51.396] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:52:51.463] /dev/mem opened. [2025-09-24 06:52:51.463] Memory mapped at address 0xffffb0bf6000. [2025-09-24 06:52:51.463] Read at address 0x00600018 (0xffffb0bf6018): 0x00000000 [2025-09-24 06:52:51.463] Write at address 0x00600018 (0xffffb0bf6018): 0x00400040, readback 0x00400040 [2025-09-24 06:52:51.479] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:52:51.494] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:52:51.622] Loaded PowerVR consumer services. [2025-09-24 06:52:51.703] 512+0 records in [2025-09-24 06:52:51.703] 512+0 records out [2025-09-24 06:52:51.719] Waiting data available... [2025-09-24 06:52:51.735] Starting syslogd/klogd: done [2025-09-24 06:52:51.751] DML Start [2025-09-24 06:52:51.959] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:52:52.198] DML res1: 0 [2025-09-24 06:52:52.591] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:52:52.591] Read Success [2025-09-24 06:52:52.591] Verifying certificate... [2025-09-24 06:52:52.815] Verified OK [2025-09-24 06:52:52.831] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:52:54.393] Verified OK [2025-09-24 06:52:54.393] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:52:55.013] Verified OK [2025-09-24 06:52:55.013] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:52:57.843] fs.protected_hardlinks = 1 [2025-09-24 06:52:57.843] fs.protected_symlinks = 1 [2025-09-24 06:52:57.843] kernel.modules_disabled = 1 [2025-09-24 06:52:58.035] [2025-09-24 06:52:58.035] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:52:59.240] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:53:07.048] SBL1:1210.0.1.0 [2025-09-24 06:53:07.096] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:53:08.679] SBL2:1210.0.1.0 [2025-09-24 06:53:08.711] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:53:08.807] j-A [2025-09-24 06:53:16.163] The R5 Autosar Classic is running [2025-09-24 06:53:16.185] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:53:16.185] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:53:16.793] INIT: version 2.96 booting [2025-09-24 06:53:16.904] INIT: Entering runlevel: 5 [2025-09-24 06:53:17.064] mtd24 attached [2025-09-24 06:53:17.064] mtd28 attached [2025-09-24 06:53:17.080] mtd32 attached [2025-09-24 06:53:17.096] ubi0:textures is mounted. [2025-09-24 06:53:17.128] RTNETLINK answers: File exists [2025-09-24 06:53:17.185] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:53:17.185] ubi1:animations is mounted. [2025-09-24 06:53:17.185] ubi2:dml_code is mounted. [2025-09-24 06:53:17.185] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:53:17.185] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:53:17.185] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:53:17.185] data.LB_FadeInType0=100 [2025-09-24 06:53:17.185] data.CHLH_FadeInType0=0 [2025-09-24 06:53:17.185] data.WU_FadeInDelay=0 [2025-09-24 06:53:17.185] max_time_out=0 [2025-09-24 06:53:17.185] No splash screen [2025-09-24 06:53:17.185] stop dss Done [2025-09-24 06:53:17.185] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:53:17.258] /dev/mem opened. [2025-09-24 06:53:17.258] Memory mapped at address 0xffff80262000. [2025-09-24 06:53:17.258] Read at address 0x00600018 (0xffff80262018): 0x00000000 [2025-09-24 06:53:17.258] Write at address 0x00600018 (0xffff80262018): 0x00400040, readback 0x00400040 [2025-09-24 06:53:17.290] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:53:17.306] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:53:17.370] Loaded PowerVR consumer services. [2025-09-24 06:53:17.506] 512+0 records in [2025-09-24 06:53:17.506] 512+0 records out [2025-09-24 06:53:17.506] Waiting data available... [2025-09-24 06:53:17.538] Starting syslogd/klogd: done [2025-09-24 06:53:17.570] DML Start [2025-09-24 06:53:17.746] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:53:17.986] DML res1: 0 [2025-09-24 06:53:18.337] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:53:18.358] Read Success [2025-09-24 06:53:18.358] Verifying certificate... [2025-09-24 06:53:18.566] Verified OK [2025-09-24 06:53:18.583] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:53:20.133] Verified OK [2025-09-24 06:53:20.133] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:53:20.817] Verified OK [2025-09-24 06:53:20.817] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:53:23.486] fs.protected_hardlinks = 1 [2025-09-24 06:53:23.502] fs.protected_symlinks = 1 [2025-09-24 06:53:23.502] kernel.modules_disabled = 1 [2025-09-24 06:53:23.695] [2025-09-24 06:53:23.695] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:53:25.066] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:53:27.419] SBL1:1210.0.1.0 [2025-09-24 06:53:32.917] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:53:34.485] SBL2:1210.0.1.0 [2025-09-24 06:53:34.516] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:53:34.628] j-A [2025-09-24 06:53:42.000] The R5 Autosar Classic is running [2025-09-24 06:53:42.000] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:53:42.000] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:53:42.608] INIT: version 2.96 booting [2025-09-24 06:53:42.720] INIT: Entering runlevel: 5 [2025-09-24 06:53:42.879] mtd28 attached [2025-09-24 06:53:42.879] mtd24 attached [2025-09-24 06:53:42.896] mtd32 attached [2025-09-24 06:53:43.006] ubi0:animations is mounted. [2025-09-24 06:53:43.006] RTNETLINK answers: File exists [2025-09-24 06:53:43.006] ubi1:textures is mounted. [2025-09-24 06:53:43.006] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:53:43.006] ubi2:dml_code is mounted. [2025-09-24 06:53:43.006] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:53:43.006] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:53:43.006] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:53:43.006] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:53:43.006] data.LB_FadeInType0=100 [2025-09-24 06:53:43.006] data.CHLH_FadeInType0=0 [2025-09-24 06:53:43.006] data.WU_FadeInDelay=0 [2025-09-24 06:53:43.006] max_time_out=0 [2025-09-24 06:53:43.006] No splash screen [2025-09-24 06:53:43.006] stop dss Done [2025-09-24 06:53:43.077] /dev/mem opened. [2025-09-24 06:53:43.077] Memory mapped at address 0xffff8c831000. [2025-09-24 06:53:43.077] Read at address 0x00600018 (0xffff8c831018): 0x00000000 [2025-09-24 06:53:43.077] Write at address 0x00600018 (0xffff8c831018): 0x00400040, readback 0x00400040 [2025-09-24 06:53:43.077] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:53:43.108] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:53:43.269] Loaded PowerVR consumer services. [2025-09-24 06:53:43.301] 512+0 records in [2025-09-24 06:53:43.301] 512+0 records out [2025-09-24 06:53:43.333] Waiting data available... [2025-09-24 06:53:43.349] Starting syslogd/klogd: done [2025-09-24 06:53:43.365] DML Start [2025-09-24 06:53:43.556] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:53:43.765] DML res1: 0 [2025-09-24 06:53:44.244] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:53:44.265] Read Success [2025-09-24 06:53:44.265] Verifying certificate... [2025-09-24 06:53:44.521] Verified OK [2025-09-24 06:53:44.536] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:53:46.276] Verified OK [2025-09-24 06:53:46.276] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:53:46.794] Verified OK [2025-09-24 06:53:46.794] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:53:49.369] fs.protected_hardlinks = 1 [2025-09-24 06:53:49.385] fs.protected_symlinks = 1 [2025-09-24 06:53:49.385] kernel.modules_disabled = 1 [2025-09-24 06:53:49.577] [2025-09-24 06:53:49.577] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:53:50.876] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:53:58.687] SBL1:1210.0.1.0 [2025-09-24 06:53:58.735] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:54:00.301] SBL2:1210.0.1.0 [2025-09-24 06:54:00.333] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:54:00.446] j-A [2025-09-24 06:54:07.819] The R5 Autosar Classic is running [2025-09-24 06:54:07.819] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:54:07.819] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:54:08.427] INIT: version 2.96 booting [2025-09-24 06:54:08.538] INIT: Entering runlevel: 5 [2025-09-24 06:54:08.699] mtd28 attached [2025-09-24 06:54:08.699] mtd24 attached [2025-09-24 06:54:08.715] mtd32 attached [2025-09-24 06:54:08.747] ubi0:animations is mounted. [2025-09-24 06:54:08.763] RTNETLINK answers: File exists [2025-09-24 06:54:08.826] ubi1:textures is mounted. [2025-09-24 06:54:08.826] ubi2:dml_code is mounted. [2025-09-24 06:54:08.826] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:54:08.826] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:54:08.826] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:54:08.826] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:54:08.826] data.LB_FadeInType0=100 [2025-09-24 06:54:08.826] data.CHLH_FadeInType0=0 [2025-09-24 06:54:08.826] data.WU_FadeInDelay=0 [2025-09-24 06:54:08.826] max_time_out=0 [2025-09-24 06:54:08.826] No splash screen [2025-09-24 06:54:08.826] stop dss Done [2025-09-24 06:54:08.826] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:54:08.874] /dev/mem opened. [2025-09-24 06:54:08.874] Memory mapped at address 0xffffb65c5000. [2025-09-24 06:54:08.900] Read at address 0x00600018 (0xffffb65c5018): 0x00000000 [2025-09-24 06:54:08.900] Write at address 0x00600018 (0xffffb65c5018): 0x00400040, readback 0x00400040 [2025-09-24 06:54:08.933] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:54:08.949] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:54:09.045] Loaded PowerVR consumer services. [2025-09-24 06:54:09.124] 512+0 records in [2025-09-24 06:54:09.124] 512+0 records out [2025-09-24 06:54:09.156] Waiting data available... [2025-09-24 06:54:09.172] Starting syslogd/klogd: done [2025-09-24 06:54:09.188] DML Start [2025-09-24 06:54:09.380] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:54:09.636] DML res1: 0 [2025-09-24 06:54:10.001] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:54:10.001] Read Success [2025-09-24 06:54:10.001] Verifying certificate... [2025-09-24 06:54:10.225] Verified OK [2025-09-24 06:54:10.241] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:54:11.920] Verified OK [2025-09-24 06:54:11.936] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:54:12.528] Verified OK [2025-09-24 06:54:12.528] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:54:15.247] fs.protected_hardlinks = 1 [2025-09-24 06:54:15.263] fs.protected_symlinks = 1 [2025-09-24 06:54:15.263] kernel.modules_disabled = 1 [2025-09-24 06:54:15.471] [2025-09-24 06:54:15.471] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:54:16.697] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:54:24.501] SBL1:1210.0.1.0 [2025-09-24 06:54:24.549] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:54:26.116] SBL2:1210.0.1.0 [2025-09-24 06:54:26.148] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:54:26.259] j-A [2025-09-24 06:54:33.634] The R5 Autosar Classic is running [2025-09-24 06:54:33.634] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:54:33.634] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:54:34.243] INIT: version 2.96 booting [2025-09-24 06:54:34.354] INIT: Entering runlevel: 5 [2025-09-24 06:54:34.498] mtd28 attached [2025-09-24 06:54:34.514] mtd32 attached [2025-09-24 06:54:34.514] mtd24 attached [2025-09-24 06:54:34.562] RTNETLINK answers: File exists [2025-09-24 06:54:34.633] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:54:34.633] ubi0:animations is mounted. [2025-09-24 06:54:34.633] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:54:34.633] ubi1:dml_code is mounted. [2025-09-24 06:54:34.633] ubi2:textures is mounted. [2025-09-24 06:54:34.633] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:54:34.633] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:54:34.633] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:54:34.633] data.LB_FadeInType0=100 [2025-09-24 06:54:34.633] data.CHLH_FadeInType0=0 [2025-09-24 06:54:34.633] data.WU_FadeInDelay=0 [2025-09-24 06:54:34.633] max_time_out=0 [2025-09-24 06:54:34.633] No splash screen [2025-09-24 06:54:34.633] stop dss Done [2025-09-24 06:54:34.714] /dev/mem opened. [2025-09-24 06:54:34.714] Memory mapped at address 0xffff848b6000. [2025-09-24 06:54:34.714] Read at address 0x00600018 (0xffff848b6018): 0x00000000 [2025-09-24 06:54:34.714] Write at address 0x00600018 (0xffff848b6018): 0x00400040, readback 0x00400040 [2025-09-24 06:54:34.714] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:54:34.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:54:34.890] Loaded PowerVR consumer services. [2025-09-24 06:54:34.906] 512+0 records in [2025-09-24 06:54:34.906] 512+0 records out [2025-09-24 06:54:34.954] Starting syslogd/klogd: done [2025-09-24 06:54:34.986] Waiting data available... [2025-09-24 06:54:34.986] DML Start [2025-09-24 06:54:35.177] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:54:35.385] DML res1: 0 [2025-09-24 06:54:35.815] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:54:35.815] Read Success [2025-09-24 06:54:35.815] Verifying certificate... [2025-09-24 06:54:36.055] Verified OK [2025-09-24 06:54:36.071] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:54:37.664] Verified OK [2025-09-24 06:54:37.664] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:54:38.223] Verified OK [2025-09-24 06:54:38.223] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:54:41.038] fs.protected_hardlinks = 1 [2025-09-24 06:54:41.066] fs.protected_symlinks = 1 [2025-09-24 06:54:41.066] kernel.modules_disabled = 1 [2025-09-24 06:54:41.241] [2025-09-24 06:54:41.241] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:54:42.479] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:54:50.302] SBL1:1210.0.1.0 [2025-09-24 06:54:50.350] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:54:51.917] SBL2:1210.0.1.0 [2025-09-24 06:54:51.948] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:54:52.060] j-A [2025-09-24 06:54:59.435] The R5 Autosar Classic is running [2025-09-24 06:54:59.435] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:54:59.435] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:55:00.043] INIT: version 2.96 booting [2025-09-24 06:55:00.155] INIT: Entering runlevel: 5 [2025-09-24 06:55:00.315] mtd28 attached [2025-09-24 06:55:00.315] mtd24 attached [2025-09-24 06:55:00.331] mtd32 attached [2025-09-24 06:55:00.363] ubi0:animations is mounted. [2025-09-24 06:55:00.379] RTNETLINK answers: File exists [2025-09-24 06:55:00.379] ubi2:dml_code is mounted. [2025-09-24 06:55:00.438] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:55:00.438] ubi1:textures is mounted. [2025-09-24 06:55:00.438] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:55:00.438] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:55:00.438] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:55:00.438] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:55:00.438] data.LB_FadeInType0=100 [2025-09-24 06:55:00.438] data.CHLH_FadeInType0=0 [2025-09-24 06:55:00.438] data.WU_FadeInDelay=0 [2025-09-24 06:55:00.438] max_time_out=0 [2025-09-24 06:55:00.438] No splash screen [2025-09-24 06:55:00.438] stop dss Done [2025-09-24 06:55:00.508] /dev/mem opened. [2025-09-24 06:55:00.508] Memory mapped at address 0xffffa97cf000. [2025-09-24 06:55:00.508] Read at address 0x00600018 (0xffffa97cf018): 0x00000000 [2025-09-24 06:55:00.508] Write at address 0x00600018 (0xffffa97cf018): 0x00400040, readback 0x00400040 [2025-09-24 06:55:00.524] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:55:00.540] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:55:00.716] Loaded PowerVR consumer services. [2025-09-24 06:55:00.764] 512+0 records in [2025-09-24 06:55:00.764] 512+0 records out [2025-09-24 06:55:00.780] Waiting data available... [2025-09-24 06:55:00.796] Starting syslogd/klogd: done [2025-09-24 06:55:00.812] DML Start [2025-09-24 06:55:01.004] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:55:01.196] DML res1: 0 [2025-09-24 06:55:01.687] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:55:01.687] Read Success [2025-09-24 06:55:01.687] Verifying certificate... [2025-09-24 06:55:01.910] Verified OK [2025-09-24 06:55:01.942] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:55:03.759] Verified OK [2025-09-24 06:55:03.759] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:55:04.278] Verified OK [2025-09-24 06:55:04.278] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:55:06.756] fs.protected_hardlinks = 1 [2025-09-24 06:55:06.756] fs.protected_symlinks = 1 [2025-09-24 06:55:06.772] kernel.modules_disabled = 1 [2025-09-24 06:55:06.964] [2025-09-24 06:55:06.964] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:55:08.318] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:55:16.210] SBL1:1210.0.1.0 [2025-09-24 06:55:16.242] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:55:17.825] SBL2:1210.0.1.0 [2025-09-24 06:55:17.857] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:55:17.953] j-A [2025-09-24 06:55:25.308] The R5 Autosar Classic is running [2025-09-24 06:55:25.333] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:55:25.333] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:55:25.941] INIT: version 2.96 booting [2025-09-24 06:55:26.053] INIT: Entering runlevel: 5 [2025-09-24 06:55:26.212] mtd24 attached [2025-09-24 06:55:26.212] mtd32 attached [2025-09-24 06:55:26.228] mtd28 attached [2025-09-24 06:55:26.277] RTNETLINK answers: File exists [2025-09-24 06:55:26.341] ubi1:dml_code is mounted. [2025-09-24 06:55:26.341] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:55:26.341] ubi0:textures is mounted. [2025-09-24 06:55:26.341] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:55:26.341] ubi2:animations is mounted. [2025-09-24 06:55:26.341] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:55:26.341] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:55:26.341] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:55:26.341] data.LB_FadeInType0=100 [2025-09-24 06:55:26.341] data.CHLH_FadeInType0=0 [2025-09-24 06:55:26.341] data.WU_FadeInDelay=0 [2025-09-24 06:55:26.341] max_time_out=0 [2025-09-24 06:55:26.341] No splash screen [2025-09-24 06:55:26.341] stop dss Done [2025-09-24 06:55:26.417] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:55:26.417] /dev/mem opened. [2025-09-24 06:55:26.417] Memory mapped at address 0xffff8f611000. [2025-09-24 06:55:26.417] Read at address 0x00600018 (0xffff8f611018): 0x00000000 [2025-09-24 06:55:26.417] Write at address 0x00600018 (0xffff8f611018): 0x00400040, readback 0x00400040 [2025-09-24 06:55:26.417] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:55:26.512] Loaded PowerVR consumer services. [2025-09-24 06:55:26.641] 512+0 records in [2025-09-24 06:55:26.641] 512+0 records out [2025-09-24 06:55:26.673] Waiting data available... [2025-09-24 06:55:26.689] Starting syslogd/klogd: done [2025-09-24 06:55:26.705] DML Start [2025-09-24 06:55:26.896] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:55:27.088] DML res1: 0 [2025-09-24 06:55:27.568] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:55:27.568] Read Success [2025-09-24 06:55:27.584] Verifying certificate... [2025-09-24 06:55:27.856] Verified OK [2025-09-24 06:55:27.872] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:55:29.635] Verified OK [2025-09-24 06:55:29.635] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:55:30.125] Verified OK [2025-09-24 06:55:30.125] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:55:32.555] fs.protected_hardlinks = 1 [2025-09-24 06:55:32.555] fs.protected_symlinks = 1 [2025-09-24 06:55:32.570] kernel.modules_disabled = 1 [2025-09-24 06:55:32.763] [2025-09-24 06:55:32.763] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:55:34.215] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:55:42.063] SBL1:1210.0.1.0 [2025-09-24 06:55:42.111] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:55:43.678] SBL2:1210.0.1.0 [2025-09-24 06:55:43.710] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:55:43.821] j-A [2025-09-24 06:55:51.197] The R5 Autosar Classic is running [2025-09-24 06:55:51.197] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:55:51.197] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:55:51.805] INIT: version 2.96 booting [2025-09-24 06:55:51.916] INIT: Entering runlevel: 5 [2025-09-24 06:55:52.060] mtd24 attached [2025-09-24 06:55:52.076] mtd28 attached [2025-09-24 06:55:52.092] mtd32 attached [2025-09-24 06:55:52.124] ubi0:textures is mounted. [2025-09-24 06:55:52.140] RTNETLINK answers: File exists [2025-09-24 06:55:52.140] ubi1:animations is mounted. [2025-09-24 06:55:52.203] ubi2:dml_code is mounted. [2025-09-24 06:55:52.203] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:55:52.203] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:55:52.203] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:55:52.203] data.LB_FadeInType0=100 [2025-09-24 06:55:52.203] data.CHLH_FadeInType0=0 [2025-09-24 06:55:52.203] data.WU_FadeInDelay=0 [2025-09-24 06:55:52.203] max_time_out=0 [2025-09-24 06:55:52.203] No splash screen [2025-09-24 06:55:52.203] stop dss Done [2025-09-24 06:55:52.203] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:55:52.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:55:52.235] /dev/mem opened. [2025-09-24 06:55:52.267] Memory mapped at address 0xffff8c690000. [2025-09-24 06:55:52.267] Read at address 0x00600018 (0xffff8c690018): 0x00000000 [2025-09-24 06:55:52.267] Write at address 0x00600018 (0xffff8c690018): 0x00400040, readback 0x00400040 [2025-09-24 06:55:52.283] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:55:52.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:55:52.395] Loaded PowerVR consumer services. [2025-09-24 06:55:52.491] 512+0 records in [2025-09-24 06:55:52.491] 512+0 records out [2025-09-24 06:55:52.523] Waiting data available... [2025-09-24 06:55:52.523] Starting syslogd/klogd: done [2025-09-24 06:55:52.555] DML Start [2025-09-24 06:55:52.731] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:55:52.954] DML res1: 0 [2025-09-24 06:55:53.354] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:55:53.375] Read Success [2025-09-24 06:55:53.375] Verifying certificate... [2025-09-24 06:55:53.647] Verified OK [2025-09-24 06:55:53.663] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:55:55.253] Verified OK [2025-09-24 06:55:55.253] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:55:55.893] Verified OK [2025-09-24 06:55:55.893] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:55:58.640] fs.protected_hardlinks = 1 [2025-09-24 06:55:58.640] fs.protected_symlinks = 1 [2025-09-24 06:55:58.640] kernel.modules_disabled = 1 [2025-09-24 06:55:58.816] [2025-09-24 06:55:58.816] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:56:00.051] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:56:02.423] [2025-09-24 06:56:07.892] SBL1:1210.0.1.0 [2025-09-24 06:56:07.940] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:56:09.506] SBL2:1210.0.1.0 [2025-09-24 06:56:09.554] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:56:09.650] j-A [2025-09-24 06:56:17.004] The R5 Autosar Classic is running [2025-09-24 06:56:17.026] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:56:17.026] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:56:17.634] INIT: version 2.96 booting [2025-09-24 06:56:17.746] INIT: Entering runlevel: 5 [2025-09-24 06:56:17.906] mtd24 attached [2025-09-24 06:56:17.906] mtd28 attached [2025-09-24 06:56:17.922] mtd32 attached [2025-09-24 06:56:17.970] RTNETLINK answers: File exists [2025-09-24 06:56:18.033] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:56:18.033] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:56:18.033] ubi1:animations is mounted. [2025-09-24 06:56:18.033] ubi0:textures is mounted. [2025-09-24 06:56:18.033] ubi2:dml_code is mounted. [2025-09-24 06:56:18.033] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:56:18.033] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:56:18.033] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:56:18.033] data.LB_FadeInType0=100 [2025-09-24 06:56:18.033] data.CHLH_FadeInType0=0 [2025-09-24 06:56:18.033] data.WU_FadeInDelay=0 [2025-09-24 06:56:18.033] max_time_out=0 [2025-09-24 06:56:18.033] No splash screen [2025-09-24 06:56:18.033] stop dss Done [2025-09-24 06:56:18.072] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:56:18.072] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:56:18.105] /dev/mem opened. [2025-09-24 06:56:18.105] Memory mapped at address 0xffffbc583000. [2025-09-24 06:56:18.105] Read at address 0x00600018 (0xffffbc583018): 0x00000000 [2025-09-24 06:56:18.105] Write at address 0x00600018 (0xffffbc583018): 0x00400040, readback 0x00400040 [2025-09-24 06:56:18.266] Loaded PowerVR consumer services. [2025-09-24 06:56:18.362] Waiting data available... [2025-09-24 06:56:18.362] 512+0 records in [2025-09-24 06:56:18.362] 512+0 records out [2025-09-24 06:56:18.410] Starting syslogd/klogd: done [2025-09-24 06:56:18.426] DML Start [2025-09-24 06:56:18.617] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:56:18.842] DML res1: 0 [2025-09-24 06:56:19.265] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:56:19.265] Read Success [2025-09-24 06:56:19.265] Verifying certificate... [2025-09-24 06:56:19.473] Verified OK [2025-09-24 06:56:19.505] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:56:21.257] Verified OK [2025-09-24 06:56:21.257] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:56:21.891] Verified OK [2025-09-24 06:56:21.891] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:56:24.545] fs.protected_hardlinks = 1 [2025-09-24 06:56:24.545] fs.protected_symlinks = 1 [2025-09-24 06:56:24.561] kernel.modules_disabled = 1 [2025-09-24 06:56:24.754] [2025-09-24 06:56:24.754] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:56:25.918] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:56:33.736] SBL1:1210.0.1.0 [2025-09-24 06:56:33.768] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:56:35.351] SBL2:1210.0.1.0 [2025-09-24 06:56:35.383] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:56:35.479] j-A [2025-09-24 06:56:42.834] The R5 Autosar Classic is running [2025-09-24 06:56:42.857] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:56:42.857] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:56:43.464] INIT: version 2.96 booting [2025-09-24 06:56:43.576] INIT: Entering runlevel: 5 [2025-09-24 06:56:43.720] mtd24 attached [2025-09-24 06:56:43.736] mtd28 attached [2025-09-24 06:56:43.752] mtd32 attached [2025-09-24 06:56:43.768] ubi0:textures is mounted. [2025-09-24 06:56:43.801] RTNETLINK answers: File exists [2025-09-24 06:56:43.801] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:56:43.848] ubi1:animations is mounted. [2025-09-24 06:56:43.848] ubi2:dml_code is mounted. [2025-09-24 06:56:43.848] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:56:43.848] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:56:43.848] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:56:43.848] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:56:43.848] data.LB_FadeInType0=100 [2025-09-24 06:56:43.848] data.CHLH_FadeInType0=0 [2025-09-24 06:56:43.848] data.WU_FadeInDelay=0 [2025-09-24 06:56:43.848] max_time_out=0 [2025-09-24 06:56:43.848] No splash screen [2025-09-24 06:56:43.848] stop dss Done [2025-09-24 06:56:43.896] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:56:43.929] /dev/mem opened. [2025-09-24 06:56:43.929] Memory mapped at address 0xffff94f02000. [2025-09-24 06:56:43.929] Read at address 0x00600018 (0xffff94f02018): 0x00000000 [2025-09-24 06:56:43.929] Write at address 0x00600018 (0xffff94f02018): 0x00400040, readback 0x00400040 [2025-09-24 06:56:43.929] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:56:44.137] Loaded PowerVR consumer services. [2025-09-24 06:56:44.153] 512+0 records in [2025-09-24 06:56:44.153] 512+0 records out [2025-09-24 06:56:44.201] Waiting data available... [2025-09-24 06:56:44.217] Starting syslogd/klogd: done [2025-09-24 06:56:44.233] DML Start [2025-09-24 06:56:44.393] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:56:44.633] DML res1: 0 [2025-09-24 06:56:45.108] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:56:45.108] Read Success [2025-09-24 06:56:45.108] Verifying certificate... [2025-09-24 06:56:45.332] Verified OK [2025-09-24 06:56:45.348] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:56:47.074] Verified OK [2025-09-24 06:56:47.074] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:56:47.664] Verified OK [2025-09-24 06:56:47.664] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:56:50.223] fs.protected_hardlinks = 1 [2025-09-24 06:56:50.223] fs.protected_symlinks = 1 [2025-09-24 06:56:50.238] kernel.modules_disabled = 1 [2025-09-24 06:56:50.446] [2025-09-24 06:56:50.446] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:56:51.719] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:56:59.566] SBL1:1210.0.1.0 [2025-09-24 06:56:59.596] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:57:01.179] SBL2:1210.0.1.0 [2025-09-24 06:57:01.211] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:57:01.323] j-A [2025-09-24 06:57:08.662] The R5 Autosar Classic is running [2025-09-24 06:57:08.693] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:57:08.693] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:57:09.285] INIT: version 2.96 booting [2025-09-24 06:57:09.397] INIT: Entering runlevel: 5 [2025-09-24 06:57:09.556] mtd24 attached [2025-09-24 06:57:09.573] mtd32 attached [2025-09-24 06:57:09.589] mtd28 attached [2025-09-24 06:57:09.605] ubi0:textures is mounted. [2025-09-24 06:57:09.637] RTNETLINK answers: File exists [2025-09-24 06:57:09.688] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:57:09.688] ubi1:dml_code is mounted. [2025-09-24 06:57:09.688] ubi2:animations is mounted. [2025-09-24 06:57:09.688] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:57:09.688] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:57:09.688] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:57:09.688] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:57:09.688] data.LB_FadeInType0=100 [2025-09-24 06:57:09.688] data.CHLH_FadeInType0=0 [2025-09-24 06:57:09.688] data.WU_FadeInDelay=0 [2025-09-24 06:57:09.688] max_time_out=0 [2025-09-24 06:57:09.688] No splash screen [2025-09-24 06:57:09.688] stop dss Done [2025-09-24 06:57:09.770] /dev/mem opened. [2025-09-24 06:57:09.770] Memory mapped at address 0xffff93566000. [2025-09-24 06:57:09.770] Read at address 0x00600018 (0xffff93566018): 0x00000000 [2025-09-24 06:57:09.770] Write at address 0x00600018 (0xffff93566018): 0x00400040, readback 0x00400040 [2025-09-24 06:57:09.770] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:57:09.770] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:57:09.963] Loaded PowerVR consumer services. [2025-09-24 06:57:10.010] 512+0 records in [2025-09-24 06:57:10.010] 512+0 records out [2025-09-24 06:57:10.042] Waiting data available... [2025-09-24 06:57:10.058] Starting syslogd/klogd: done [2025-09-24 06:57:10.074] DML Start [2025-09-24 06:57:10.218] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:57:10.458] DML res1: 0 [2025-09-24 06:57:10.917] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:57:10.917] Read Success [2025-09-24 06:57:10.917] Verifying certificate... [2025-09-24 06:57:11.173] Verified OK [2025-09-24 06:57:11.205] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:57:12.703] Verified OK [2025-09-24 06:57:12.703] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:57:13.271] Verified OK [2025-09-24 06:57:13.271] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:57:16.053] fs.protected_hardlinks = 1 [2025-09-24 06:57:16.053] fs.protected_symlinks = 1 [2025-09-24 06:57:16.069] kernel.modules_disabled = 1 [2025-09-24 06:57:16.261] [2025-09-24 06:57:16.261] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:57:17.571] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:57:25.430] SBL1:1210.0.1.0 [2025-09-24 06:57:25.462] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:57:27.045] SBL2:1210.0.1.0 [2025-09-24 06:57:27.077] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:57:27.173] j-A [2025-09-24 06:57:34.528] The R5 Autosar Classic is running [2025-09-24 06:57:34.552] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:57:34.552] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:57:35.160] INIT: version 2.96 booting [2025-09-24 06:57:35.272] INIT: Entering runlevel: 5 [2025-09-24 06:57:35.431] mtd24 attached [2025-09-24 06:57:35.447] mtd32 attached [2025-09-24 06:57:35.447] mtd28 attached [2025-09-24 06:57:35.479] ubi0:textures is mounted. [2025-09-24 06:57:35.561] RTNETLINK answers: File exists [2025-09-24 06:57:35.561] ubi1:dml_code is mounted. [2025-09-24 06:57:35.561] ubi2:animations is mounted. [2025-09-24 06:57:35.561] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:57:35.561] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:57:35.561] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:57:35.561] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:57:35.561] data.LB_FadeInType0=100 [2025-09-24 06:57:35.561] data.CHLH_FadeInType0=0 [2025-09-24 06:57:35.561] data.WU_FadeInDelay=0 [2025-09-24 06:57:35.561] max_time_out=0 [2025-09-24 06:57:35.561] No splash screen [2025-09-24 06:57:35.561] stop dss Done [2025-09-24 06:57:35.561] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:57:35.617] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:57:35.617] /dev/mem opened. [2025-09-24 06:57:35.617] Memory mapped at address 0xffffa117d000. [2025-09-24 06:57:35.617] Read at address 0x00600018 (0xffffa117d018): 0x00000000 [2025-09-24 06:57:35.617] Write at address 0x00600018 (0xffffa117d018): 0x00400040, readback 0x00400040 [2025-09-24 06:57:35.617] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:57:35.777] Loaded PowerVR consumer services. [2025-09-24 06:57:35.888] Waiting data available... [2025-09-24 06:57:35.904] 512+0 records in [2025-09-24 06:57:35.904] 512+0 records out [2025-09-24 06:57:35.920] Starting syslogd/klogd: done [2025-09-24 06:57:35.953] DML Start [2025-09-24 06:57:36.112] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:57:36.320] DML res1: 0 [2025-09-24 06:57:36.793] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:57:36.793] Read Success [2025-09-24 06:57:36.793] Verifying certificate... [2025-09-24 06:57:37.065] Verified OK [2025-09-24 06:57:37.097] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:57:38.744] Verified OK [2025-09-24 06:57:38.760] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:57:39.374] Verified OK [2025-09-24 06:57:39.374] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:57:41.965] fs.protected_hardlinks = 1 [2025-09-24 06:57:41.965] fs.protected_symlinks = 1 [2025-09-24 06:57:41.981] kernel.modules_disabled = 1 [2025-09-24 06:57:42.172] [2025-09-24 06:57:42.172] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:57:43.435] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:57:51.269] SBL1:1210.0.1.0 [2025-09-24 06:57:51.317] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 06:57:52.883] SBL2:1210.0.1.0 [2025-09-24 06:57:52.915] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:57:53.027] j-A [2025-09-24 06:58:00.401] The R5 Autosar Classic is running [2025-09-24 06:58:00.401] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:58:00.401] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:58:01.010] INIT: version 2.96 booting [2025-09-24 06:58:01.121] INIT: Entering runlevel: 5 [2025-09-24 06:58:01.281] mtd24 attached [2025-09-24 06:58:01.281] mtd28 attached [2025-09-24 06:58:01.297] mtd32 attached [2025-09-24 06:58:01.345] ubi0:textures is mounted. [2025-09-24 06:58:01.345] ubi1:animations is mounted. [2025-09-24 06:58:01.345] RTNETLINK answers: File exists [2025-09-24 06:58:01.404] ubi2:dml_code is mounted. [2025-09-24 06:58:01.404] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:58:01.404] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:58:01.404] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:58:01.404] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:58:01.404] data.LB_FadeInType0=100 [2025-09-24 06:58:01.404] data.CHLH_FadeInType0=0 [2025-09-24 06:58:01.404] data.WU_FadeInDelay=0 [2025-09-24 06:58:01.404] max_time_out=0 [2025-09-24 06:58:01.404] No splash screen [2025-09-24 06:58:01.404] stop dss Done [2025-09-24 06:58:01.404] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:58:01.452] /dev/mem opened. [2025-09-24 06:58:01.452] Memory mapped at address 0xffffb08d0000. [2025-09-24 06:58:01.478] Read at address 0x00600018 (0xffffb08d0018): 0x00000000 [2025-09-24 06:58:01.478] Write at address 0x00600018 (0xffffb08d0018): 0x00400040, readback 0x00400040 [2025-09-24 06:58:01.510] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:58:01.526] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:58:01.670] Loaded PowerVR consumer services. [2025-09-24 06:58:01.702] 512+0 records in [2025-09-24 06:58:01.702] 512+0 records out [2025-09-24 06:58:01.734] Waiting data available... [2025-09-24 06:58:01.750] Starting syslogd/klogd: done [2025-09-24 06:58:01.766] DML Start [2025-09-24 06:58:01.942] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:58:02.150] DML res1: 0 [2025-09-24 06:58:02.629] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:58:02.629] Read Success [2025-09-24 06:58:02.629] Verifying certificate... [2025-09-24 06:58:02.868] Verified OK [2025-09-24 06:58:02.884] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:58:04.499] Verified OK [2025-09-24 06:58:04.499] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:58:05.148] Verified OK [2025-09-24 06:58:05.148] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:58:07.835] fs.protected_hardlinks = 1 [2025-09-24 06:58:07.835] fs.protected_symlinks = 1 [2025-09-24 06:58:07.850] kernel.modules_disabled = 1 [2025-09-24 06:58:08.027] [2025-09-24 06:58:08.027] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:58:09.283] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:58:17.092] SBL1:1210.0.1.0 [2025-09-24 06:58:17.140] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:58:18.707] SBL2:1210.0.1.0 [2025-09-24 06:58:18.755] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:58:18.851] j-A [2025-09-24 06:58:26.207] The R5 Autosar Classic is running [2025-09-24 06:58:26.207] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:58:26.228] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:58:26.836] INIT: version 2.96 booting [2025-09-24 06:58:26.948] INIT: Entering runlevel: 5 [2025-09-24 06:58:27.092] mtd28 attached [2025-09-24 06:58:27.108] mtd24 attached [2025-09-24 06:58:27.124] mtd32 attached [2025-09-24 06:58:27.156] ubi0:animations is mounted. [2025-09-24 06:58:27.172] ubi1:textures is mounted. [2025-09-24 06:58:27.230] RTNETLINK answers: File exists [2025-09-24 06:58:27.230] ubi2:dml_code is mounted. [2025-09-24 06:58:27.230] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:58:27.230] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:58:27.230] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:58:27.230] data.LB_FadeInType0=100 [2025-09-24 06:58:27.230] data.CHLH_FadeInType0=0 [2025-09-24 06:58:27.230] data.WU_FadeInDelay=0 [2025-09-24 06:58:27.230] max_time_out=0 [2025-09-24 06:58:27.230] No splash screen [2025-09-24 06:58:27.230] stop dss Done [2025-09-24 06:58:27.230] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:58:27.230] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:58:27.261] /dev/mem opened. [2025-09-24 06:58:27.294] Memory mapped at address 0xffff9f897000. [2025-09-24 06:58:27.294] Read at address 0x00600018 (0xffff9f897018): 0x00000000 [2025-09-24 06:58:27.294] Write at address 0x00600018 (0xffff9f897018): 0x00400040, readback 0x00400040 [2025-09-24 06:58:27.358] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:58:27.374] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:58:27.533] Loaded PowerVR consumer services. [2025-09-24 06:58:27.549] 512+0 records in [2025-09-24 06:58:27.549] 512+0 records out [2025-09-24 06:58:27.581] Waiting data available... [2025-09-24 06:58:27.581] Starting syslogd/klogd: done [2025-09-24 06:58:27.597] DML Start [2025-09-24 06:58:27.741] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:58:27.949] DML res1: 0 [2025-09-24 06:58:28.476] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:58:28.497] Read Success [2025-09-24 06:58:28.497] Verifying certificate... [2025-09-24 06:58:28.705] Verified OK [2025-09-24 06:58:28.721] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:58:30.385] Verified OK [2025-09-24 06:58:30.385] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:58:30.952] Verified OK [2025-09-24 06:58:30.952] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:58:33.558] fs.protected_hardlinks = 1 [2025-09-24 06:58:33.558] fs.protected_symlinks = 1 [2025-09-24 06:58:33.573] kernel.modules_disabled = 1 [2025-09-24 06:58:33.765] [2025-09-24 06:58:33.765] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:58:35.100] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:58:42.927] SBL1:1210.0.1.0 [2025-09-24 06:58:42.975] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:58:44.558] SBL2:1210.0.1.0 [2025-09-24 06:58:44.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:58:44.685] j-A [2025-09-24 06:58:52.042] The R5 Autosar Classic is running [2025-09-24 06:58:52.065] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:58:52.065] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:58:52.672] INIT: version 2.96 booting [2025-09-24 06:58:52.784] INIT: Entering runlevel: 5 [2025-09-24 06:58:52.929] mtd24 attached [2025-09-24 06:58:52.945] mtd28 attached [2025-09-24 06:58:52.961] mtd32 attached [2025-09-24 06:58:53.063] ubi0:textures is mounted. [2025-09-24 06:58:53.063] ubi1:animations is mounted. [2025-09-24 06:58:53.063] RTNETLINK answers: File exists [2025-09-24 06:58:53.063] ubi2:dml_code is mounted. [2025-09-24 06:58:53.063] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:58:53.063] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:58:53.063] data.LB_FadeInType0=100 [2025-09-24 06:58:53.063] data.CHLH_FadeInType0=0 [2025-09-24 06:58:53.063] data.WU_FadeInDelay=0 [2025-09-24 06:58:53.063] max_time_out=0 [2025-09-24 06:58:53.063] No splash screen [2025-09-24 06:58:53.063] stop dss Done [2025-09-24 06:58:53.063] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:58:53.063] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:58:53.063] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:58:53.095] /dev/mem opened. [2025-09-24 06:58:53.095] Memory mapped at address 0xffff9afac000. [2025-09-24 06:58:53.121] Read at address 0x00600018 (0xffff9afac018): 0x00000000 [2025-09-24 06:58:53.121] Write at address 0x00600018 (0xffff9afac018): 0x00400040, readback 0x00400040 [2025-09-24 06:58:53.185] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:58:53.185] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:58:53.281] Loaded PowerVR consumer services. [2025-09-24 06:58:53.377] Waiting data available... [2025-09-24 06:58:53.393] 512+0 records in [2025-09-24 06:58:53.393] 512+0 records out [2025-09-24 06:58:53.441] Starting syslogd/klogd: done [2025-09-24 06:58:53.457] DML Start [2025-09-24 06:58:53.601] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:58:53.792] DML res1: 0 [2025-09-24 06:58:54.410] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:58:54.410] Read Success [2025-09-24 06:58:54.410] Verifying certificate... [2025-09-24 06:58:54.666] Verified OK [2025-09-24 06:58:54.698] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:58:56.454] Verified OK [2025-09-24 06:58:56.454] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:58:56.922] Verified OK [2025-09-24 06:58:56.922] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:58:59.304] fs.protected_hardlinks = 1 [2025-09-24 06:58:59.304] fs.protected_symlinks = 1 [2025-09-24 06:58:59.320] kernel.modules_disabled = 1 [2025-09-24 06:58:59.513] [2025-09-24 06:58:59.513] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:59:00.960] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:59:08.780] SBL1:1210.0.1.0 [2025-09-24 06:59:08.828] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:59:10.395] SBL2:1210.0.1.0 [2025-09-24 06:59:10.427] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:59:10.539] j-A [2025-09-24 06:59:17.913] The R5 Autosar Classic is running [2025-09-24 06:59:17.913] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:59:17.913] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:59:18.521] INIT: version 2.96 booting [2025-09-24 06:59:18.632] INIT: Entering runlevel: 5 [2025-09-24 06:59:18.776] mtd24 attached [2025-09-24 06:59:18.792] mtd28 attached [2025-09-24 06:59:18.808] mtd32 attached [2025-09-24 06:59:18.856] RTNETLINK answers: File exists [2025-09-24 06:59:18.856] ubi0:textures is mounted. [2025-09-24 06:59:18.915] ubi1:animations is mounted. [2025-09-24 06:59:18.915] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:59:18.915] ubi2:dml_code is mounted. [2025-09-24 06:59:18.915] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:59:18.915] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:59:18.915] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:59:18.915] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:59:18.915] data.LB_FadeInType0=100 [2025-09-24 06:59:18.915] data.CHLH_FadeInType0=0 [2025-09-24 06:59:18.915] data.WU_FadeInDelay=0 [2025-09-24 06:59:18.915] max_time_out=0 [2025-09-24 06:59:18.915] No splash screen [2025-09-24 06:59:18.915] stop dss Done [2025-09-24 06:59:18.962] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:59:19.000] /dev/mem opened. [2025-09-24 06:59:19.000] Memory mapped at address 0xffffb7ee3000. [2025-09-24 06:59:19.000] Read at address 0x00600018 (0xffffb7ee3018): 0x00000000 [2025-09-24 06:59:19.000] Write at address 0x00600018 (0xffffb7ee3018): 0x00400040, readback 0x00400040 [2025-09-24 06:59:19.000] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:59:19.080] Loaded PowerVR consumer services. [2025-09-24 06:59:19.208] 512+0 records in [2025-09-24 06:59:19.224] 512+0 records out [2025-09-24 06:59:19.240] Waiting data available... [2025-09-24 06:59:19.256] Starting syslogd/klogd: done [2025-09-24 06:59:19.288] DML Start [2025-09-24 06:59:19.464] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:59:19.688] DML res1: 0 [2025-09-24 06:59:20.163] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:59:20.163] Read Success [2025-09-24 06:59:20.163] Verifying certificate... [2025-09-24 06:59:20.404] Verified OK [2025-09-24 06:59:20.420] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:59:22.031] Verified OK [2025-09-24 06:59:22.031] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:59:22.638] Verified OK [2025-09-24 06:59:22.654] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:59:25.340] fs.protected_hardlinks = 1 [2025-09-24 06:59:25.371] fs.protected_symlinks = 1 [2025-09-24 06:59:25.371] kernel.modules_disabled = 1 [2025-09-24 06:59:25.562] [2025-09-24 06:59:25.562] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:59:26.818] RTNETLINK answers: Cannot assign requested address [2025-09-24 06:59:34.613] SBL1:1210.0.1.0 [2025-09-24 06:59:34.661] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:59:36.228] SBL2:1210.0.1.0 [2025-09-24 06:59:36.259] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 06:59:36.371] j-A [2025-09-24 06:59:43.748] The R5 Autosar Classic is running [2025-09-24 06:59:43.748] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 06:59:43.748] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 06:59:44.356] INIT: version 2.96 booting [2025-09-24 06:59:44.467] INIT: Entering runlevel: 5 [2025-09-24 06:59:44.627] mtd24 attached [2025-09-24 06:59:44.627] mtd28 attached [2025-09-24 06:59:44.675] ubi0:textures is mounted. [2025-09-24 06:59:44.734] mtd32 attached [2025-09-24 06:59:44.734] ubi1:animations is mounted. [2025-09-24 06:59:44.734] RTNETLINK answers: File exists [2025-09-24 06:59:44.734] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 06:59:44.734] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 06:59:44.734] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 06:59:44.734] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 06:59:44.734] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 06:59:44.734] ubi2:dml_code is mounted. [2025-09-24 06:59:44.750] data.LB_FadeInType0=100 [2025-09-24 06:59:44.750] data.CHLH_FadeInType0=0 [2025-09-24 06:59:44.750] data.WU_FadeInDelay=0 [2025-09-24 06:59:44.784] max_time_out=0 [2025-09-24 06:59:44.784] No splash screen [2025-09-24 06:59:44.784] stop dss Done [2025-09-24 06:59:44.784] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 06:59:44.784] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 06:59:44.858] /dev/mem opened. [2025-09-24 06:59:44.858] Memory mapped at address 0xffff83e2e000. [2025-09-24 06:59:44.858] Read at address 0x00600018 (0xffff83e2e018): 0x00000000 [2025-09-24 06:59:44.858] Write at address 0x00600018 (0xffff83e2e018): 0x00400040, readback 0x00400040 [2025-09-24 06:59:45.001] Loaded PowerVR consumer services. [2025-09-24 06:59:45.033] 512+0 records in [2025-09-24 06:59:45.049] 512+0 records out [2025-09-24 06:59:45.097] Starting syslogd/klogd: done [2025-09-24 06:59:45.129] Waiting data available... [2025-09-24 06:59:45.129] DML Start [2025-09-24 06:59:45.289] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 06:59:45.481] DML res1: 0 [2025-09-24 06:59:46.030] Read DML Algo certificate (mtd31) and save to file [2025-09-24 06:59:46.030] Read Success [2025-09-24 06:59:46.030] Verifying certificate... [2025-09-24 06:59:46.286] Verified OK [2025-09-24 06:59:46.302] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 06:59:48.009] Verified OK [2025-09-24 06:59:48.009] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 06:59:48.543] Verified OK [2025-09-24 06:59:48.543] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 06:59:51.230] fs.protected_hardlinks = 1 [2025-09-24 06:59:51.230] fs.protected_symlinks = 1 [2025-09-24 06:59:51.246] kernel.modules_disabled = 1 [2025-09-24 06:59:51.438] [2025-09-24 06:59:51.438] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 06:59:52.620] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:00:00.449] SBL1:1210.0.1.0 [2025-09-24 07:00:00.497] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:00:02.064] SBL2:1210.0.1.0 [2025-09-24 07:00:02.096] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:00:02.207] j-A [2025-09-24 07:00:09.562] The R5 Autosar Classic is running [2025-09-24 07:00:09.562] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:00:09.583] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:00:10.191] INIT: version 2.96 booting [2025-09-24 07:00:10.302] INIT: Entering runlevel: 5 [2025-09-24 07:00:10.462] mtd28 attached [2025-09-24 07:00:10.478] mtd24 attached [2025-09-24 07:00:10.494] mtd32 attached [2025-09-24 07:00:10.526] ubi0:animations is mounted. [2025-09-24 07:00:10.591] ubi1:textures is mounted. [2025-09-24 07:00:10.591] RTNETLINK answers: File exists [2025-09-24 07:00:10.591] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:00:10.591] ubi2:dml_code is mounted. [2025-09-24 07:00:10.591] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:00:10.591] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:00:10.591] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:00:10.591] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:00:10.591] data.LB_FadeInType0=100 [2025-09-24 07:00:10.591] data.CHLH_FadeInType0=0 [2025-09-24 07:00:10.591] data.WU_FadeInDelay=0 [2025-09-24 07:00:10.591] max_time_out=0 [2025-09-24 07:00:10.591] No splash screen [2025-09-24 07:00:10.591] stop dss Done [2025-09-24 07:00:10.668] /dev/mem opened. [2025-09-24 07:00:10.668] Memory mapped at address 0xffffa4e50000. [2025-09-24 07:00:10.668] Read at address 0x00600018 (0xffffa4e50018): 0x00000000 [2025-09-24 07:00:10.668] Write at address 0x00600018 (0xffffa4e50018): 0x00400040, readback 0x00400040 [2025-09-24 07:00:10.668] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:00:10.668] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:00:10.765] Loaded PowerVR consumer services. [2025-09-24 07:00:10.905] 512+0 records in [2025-09-24 07:00:10.905] 512+0 records out [2025-09-24 07:00:10.905] Waiting data available... [2025-09-24 07:00:10.937] Starting syslogd/klogd: done [2025-09-24 07:00:10.953] DML Start [2025-09-24 07:00:11.145] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:00:11.353] DML res1: 0 [2025-09-24 07:00:11.768] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:00:11.768] Read Success [2025-09-24 07:00:11.768] Verifying certificate... [2025-09-24 07:00:12.039] Verified OK [2025-09-24 07:00:12.055] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:00:13.655] Verified OK [2025-09-24 07:00:13.671] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:00:14.304] Verified OK [2025-09-24 07:00:14.304] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:00:16.974] fs.protected_hardlinks = 1 [2025-09-24 07:00:16.989] fs.protected_symlinks = 1 [2025-09-24 07:00:16.989] kernel.modules_disabled = 1 [2025-09-24 07:00:17.198] [2025-09-24 07:00:17.198] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:00:18.444] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:00:26.295] SBL1:1210.0.1.0 [2025-09-24 07:00:26.327] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:00:27.910] SBL2:1210.0.1.0 [2025-09-24 07:00:27.941] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:00:28.053] j-A [2025-09-24 07:00:35.425] The R5 Autosar Classic is running [2025-09-24 07:00:35.425] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:00:35.425] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:00:36.032] INIT: version 2.96 booting [2025-09-24 07:00:36.144] INIT: Entering runlevel: 5 [2025-09-24 07:00:36.287] mtd28 attached [2025-09-24 07:00:36.303] mtd24 attached [2025-09-24 07:00:36.319] mtd32 attached [2025-09-24 07:00:36.419] RTNETLINK answers: File exists [2025-09-24 07:00:36.419] ubi0:animations is mounted. [2025-09-24 07:00:36.419] ubi1:textures is mounted. [2025-09-24 07:00:36.419] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:00:36.419] ubi2:dml_code is mounted. [2025-09-24 07:00:36.419] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:00:36.419] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:00:36.419] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:00:36.419] data.LB_FadeInType0=100 [2025-09-24 07:00:36.419] data.CHLH_FadeInType0=0 [2025-09-24 07:00:36.419] data.WU_FadeInDelay=0 [2025-09-24 07:00:36.419] max_time_out=0 [2025-09-24 07:00:36.419] No splash screen [2025-09-24 07:00:36.419] stop dss Done [2025-09-24 07:00:36.419] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:00:36.467] /dev/mem opened. [2025-09-24 07:00:36.467] Memory mapped at address 0xffffa2729000. [2025-09-24 07:00:36.507] Read at address 0x00600018 (0xffffa2729018): 0x00000000 [2025-09-24 07:00:36.508] Write at address 0x00600018 (0xffffa2729018): 0x00400040, readback 0x00400040 [2025-09-24 07:00:36.508] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:00:36.508] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:00:36.603] Loaded PowerVR consumer services. [2025-09-24 07:00:36.741] Waiting data available... [2025-09-24 07:00:36.741] 512+0 records in [2025-09-24 07:00:36.741] 512+0 records out [2025-09-24 07:00:36.772] Starting syslogd/klogd: done [2025-09-24 07:00:36.788] DML Start [2025-09-24 07:00:37.013] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:00:37.236] DML res1: 0 [2025-09-24 07:00:37.615] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:00:37.615] Read Success [2025-09-24 07:00:37.615] Verifying certificate... [2025-09-24 07:00:37.855] Verified OK [2025-09-24 07:00:37.871] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:00:39.525] Verified OK [2025-09-24 07:00:39.525] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:00:40.144] Verified OK [2025-09-24 07:00:40.144] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:00:42.831] fs.protected_hardlinks = 1 [2025-09-24 07:00:42.847] fs.protected_symlinks = 1 [2025-09-24 07:00:42.863] kernel.modules_disabled = 1 [2025-09-24 07:00:43.054] [2025-09-24 07:00:43.054] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:00:44.309] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:00:52.135] SBL1:1210.0.1.0 [2025-09-24 07:00:52.183] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:00:53.750] SBL2:1210.0.1.0 [2025-09-24 07:00:53.782] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:00:53.894] j-A [2025-09-24 07:01:01.269] The R5 Autosar Classic is running [2025-09-24 07:01:01.269] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:01:01.269] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:01:01.876] INIT: version 2.96 booting [2025-09-24 07:01:01.987] INIT: Entering runlevel: 5 [2025-09-24 07:01:02.132] mtd24 attached [2025-09-24 07:01:02.165] mtd32 attached [2025-09-24 07:01:02.165] mtd28 attached [2025-09-24 07:01:02.180] ubi0:textures is mounted. [2025-09-24 07:01:02.212] RTNETLINK answers: File exists [2025-09-24 07:01:02.212] ubi1:dml_code is mounted. [2025-09-24 07:01:02.273] ubi2:animations is mounted. [2025-09-24 07:01:02.273] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:01:02.273] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:01:02.273] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:01:02.273] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:01:02.273] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:01:02.273] data.LB_FadeInType0=100 [2025-09-24 07:01:02.273] data.CHLH_FadeInType0=0 [2025-09-24 07:01:02.273] data.WU_FadeInDelay=0 [2025-09-24 07:01:02.273] max_time_out=0 [2025-09-24 07:01:02.273] No splash screen [2025-09-24 07:01:02.273] stop dss Done [2025-09-24 07:01:02.304] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:01:02.347] /dev/mem opened. [2025-09-24 07:01:02.347] Memory mapped at address 0xffff89e83000. [2025-09-24 07:01:02.347] Read at address 0x00600018 (0xffff89e83018): 0x00000000 [2025-09-24 07:01:02.347] Write at address 0x00600018 (0xffff89e83018): 0x00400040, readback 0x00400040 [2025-09-24 07:01:02.347] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:01:02.539] Loaded PowerVR consumer services. [2025-09-24 07:01:02.571] 512+0 records in [2025-09-24 07:01:02.571] 512+0 records out [2025-09-24 07:01:02.603] Waiting data available... [2025-09-24 07:01:02.635] Starting syslogd/klogd: done [2025-09-24 07:01:02.651] DML Start [2025-09-24 07:01:02.795] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:01:03.019] DML res1: 0 [2025-09-24 07:01:03.482] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:01:03.498] Read Success [2025-09-24 07:01:03.498] Verifying certificate... [2025-09-24 07:01:03.722] Verified OK [2025-09-24 07:01:03.738] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:01:05.474] Verified OK [2025-09-24 07:01:05.474] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:01:06.093] Verified OK [2025-09-24 07:01:06.093] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:01:08.694] fs.protected_hardlinks = 1 [2025-09-24 07:01:08.694] fs.protected_symlinks = 1 [2025-09-24 07:01:08.694] kernel.modules_disabled = 1 [2025-09-24 07:01:08.887] [2025-09-24 07:01:08.887] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:01:10.148] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:01:17.996] SBL1:1210.0.1.0 [2025-09-24 07:01:18.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:01:19.627] SBL2:1210.0.1.0 [2025-09-24 07:01:19.659] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:01:19.755] j-A [2025-09-24 07:01:27.109] The R5 Autosar Classic is running [2025-09-24 07:01:27.133] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:01:27.133] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:01:27.741] INIT: version 2.96 booting [2025-09-24 07:01:27.852] INIT: Entering runlevel: 5 [2025-09-24 07:01:27.996] mtd24 attached [2025-09-24 07:01:28.012] mtd28 attached [2025-09-24 07:01:28.028] mtd32 attached [2025-09-24 07:01:28.076] ubi0:textures is mounted. [2025-09-24 07:01:28.076] RTNETLINK answers: File exists [2025-09-24 07:01:28.133] ubi2:dml_code is mounted. [2025-09-24 07:01:28.133] ubi1:animations is mounted. [2025-09-24 07:01:28.133] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:01:28.133] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:01:28.133] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:01:28.133] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:01:28.133] data.LB_FadeInType0=100 [2025-09-24 07:01:28.133] data.CHLH_FadeInType0=0 [2025-09-24 07:01:28.133] data.WU_FadeInDelay=0 [2025-09-24 07:01:28.133] max_time_out=0 [2025-09-24 07:01:28.133] No splash screen [2025-09-24 07:01:28.133] stop dss Done [2025-09-24 07:01:28.133] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:01:28.182] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:01:28.217] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:01:28.217] /dev/mem opened. [2025-09-24 07:01:28.217] Memory mapped at address 0xffff8f83f000. [2025-09-24 07:01:28.217] Read at address 0x00600018 (0xffff8f83f018): 0x00000000 [2025-09-24 07:01:28.217] Write at address 0x00600018 (0xffff8f83f018): 0x00400040, readback 0x00400040 [2025-09-24 07:01:28.393] Loaded PowerVR consumer services. [2025-09-24 07:01:28.425] 512+0 records in [2025-09-24 07:01:28.441] 512+0 records out [2025-09-24 07:01:28.456] Waiting data available... [2025-09-24 07:01:28.488] Starting syslogd/klogd: done [2025-09-24 07:01:28.504] DML Start [2025-09-24 07:01:28.680] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:01:28.904] DML res1: 0 [2025-09-24 07:01:29.360] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:01:29.360] Read Success [2025-09-24 07:01:29.360] Verifying certificate... [2025-09-24 07:01:29.600] Verified OK [2025-09-24 07:01:29.616] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:01:31.259] Verified OK [2025-09-24 07:01:31.259] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:01:31.946] Verified OK [2025-09-24 07:01:31.946] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:01:34.599] fs.protected_hardlinks = 1 [2025-09-24 07:01:34.599] fs.protected_symlinks = 1 [2025-09-24 07:01:34.615] kernel.modules_disabled = 1 [2025-09-24 07:01:34.807] [2025-09-24 07:01:34.807] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:01:36.030] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:01:43.881] SBL1:1210.0.1.0 [2025-09-24 07:01:43.929] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:01:45.496] SBL2:1210.0.1.0 [2025-09-24 07:01:45.528] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:01:45.640] j-A [2025-09-24 07:01:53.014] The R5 Autosar Classic is running [2025-09-24 07:01:53.014] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:01:53.014] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:01:53.622] INIT: version 2.96 booting [2025-09-24 07:01:53.733] INIT: Entering runlevel: 5 [2025-09-24 07:01:53.893] mtd28 attached [2025-09-24 07:01:53.893] mtd32 attached [2025-09-24 07:01:53.909] mtd24 attached [2025-09-24 07:01:53.957] ubi0:animations is mounted. [2025-09-24 07:01:54.021] RTNETLINK answers: File exists [2025-09-24 07:01:54.021] ubi1:dml_code is mounted. [2025-09-24 07:01:54.021] ubi2:textures is mounted. [2025-09-24 07:01:54.021] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:01:54.021] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:01:54.021] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:01:54.021] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:01:54.021] data.LB_FadeInType0=100 [2025-09-24 07:01:54.021] data.CHLH_FadeInType0=0 [2025-09-24 07:01:54.021] data.WU_FadeInDelay=0 [2025-09-24 07:01:54.021] max_time_out=0 [2025-09-24 07:01:54.021] No splash screen [2025-09-24 07:01:54.021] stop dss Done [2025-09-24 07:01:54.021] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:01:54.117] /dev/mem opened. [2025-09-24 07:01:54.117] Memory mapped at address 0xffffad0c1000. [2025-09-24 07:01:54.117] Read at address 0x00600018 (0xffffad0c1018): 0x00000000 [2025-09-24 07:01:54.117] Write at address 0x00600018 (0xffffad0c1018): 0x00400040, readback 0x00400040 [2025-09-24 07:01:54.117] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:01:54.117] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:01:54.213] Loaded PowerVR consumer services. [2025-09-24 07:01:54.325] 512+0 records in [2025-09-24 07:01:54.325] 512+0 records out [2025-09-24 07:01:54.341] Waiting data available... [2025-09-24 07:01:54.373] Starting syslogd/klogd: done [2025-09-24 07:01:54.389] DML Start [2025-09-24 07:01:54.596] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:01:54.804] DML res1: 0 [2025-09-24 07:01:55.219] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:01:55.219] Read Success [2025-09-24 07:01:55.219] Verifying certificate... [2025-09-24 07:01:55.475] Verified OK [2025-09-24 07:01:55.491] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:01:57.136] Verified OK [2025-09-24 07:01:57.136] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:01:57.821] Verified OK [2025-09-24 07:01:57.821] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:02:00.442] fs.protected_hardlinks = 1 [2025-09-24 07:02:00.442] fs.protected_symlinks = 1 [2025-09-24 07:02:00.442] kernel.modules_disabled = 1 [2025-09-24 07:02:00.650] [2025-09-24 07:02:00.650] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:02:01.892] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:02:09.714] SBL1:1210.0.1.0 [2025-09-24 07:02:09.746] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:02:11.328] SBL2:1210.0.1.0 [2025-09-24 07:02:11.360] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:02:11.473] j-A [2025-09-24 07:02:18.843] The R5 Autosar Classic is running [2025-09-24 07:02:18.843] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:02:18.843] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:02:19.451] INIT: version 2.96 booting [2025-09-24 07:02:19.563] INIT: Entering runlevel: 5 [2025-09-24 07:02:19.723] mtd24 attached [2025-09-24 07:02:19.723] mtd28 attached [2025-09-24 07:02:19.755] mtd32 attached [2025-09-24 07:02:19.771] ubi0:textures is mounted. [2025-09-24 07:02:19.787] RTNETLINK answers: File exists [2025-09-24 07:02:19.847] ubi1:animations is mounted. [2025-09-24 07:02:19.847] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:02:19.847] ubi2:dml_code is mounted. [2025-09-24 07:02:19.847] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:02:19.847] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:02:19.847] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:02:19.847] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:02:19.847] data.LB_FadeInType0=100 [2025-09-24 07:02:19.847] data.CHLH_FadeInType0=0 [2025-09-24 07:02:19.847] data.WU_FadeInDelay=0 [2025-09-24 07:02:19.847] max_time_out=0 [2025-09-24 07:02:19.847] No splash screen [2025-09-24 07:02:19.847] stop dss Done [2025-09-24 07:02:19.937] /dev/mem opened. [2025-09-24 07:02:19.937] Memory mapped at address 0xffffb57bf000. [2025-09-24 07:02:19.937] Read at address 0x00600018 (0xffffb57bf018): 0x00000000 [2025-09-24 07:02:19.937] Write at address 0x00600018 (0xffffb57bf018): 0x00400040, readback 0x00400040 [2025-09-24 07:02:19.937] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:02:19.937] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:02:20.018] Loaded PowerVR consumer services. [2025-09-24 07:02:20.145] 512+0 records in [2025-09-24 07:02:20.145] 512+0 records out [2025-09-24 07:02:20.177] Waiting data available... [2025-09-24 07:02:20.177] Starting syslogd/klogd: done [2025-09-24 07:02:20.193] DML Start [2025-09-24 07:02:20.401] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:02:20.641] DML res1: 0 [2025-09-24 07:02:21.008] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:02:21.008] Read Success [2025-09-24 07:02:21.008] Verifying certificate... [2025-09-24 07:02:21.264] Verified OK [2025-09-24 07:02:21.280] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:02:22.895] Verified OK [2025-09-24 07:02:22.895] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:02:23.540] Verified OK [2025-09-24 07:02:23.540] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:02:26.210] fs.protected_hardlinks = 1 [2025-09-24 07:02:26.226] fs.protected_symlinks = 1 [2025-09-24 07:02:26.226] kernel.modules_disabled = 1 [2025-09-24 07:02:26.433] [2025-09-24 07:02:26.433] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:02:27.710] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:02:35.595] SBL1:1210.0.1.0 [2025-09-24 07:02:35.627] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:02:37.210] SBL2:1210.0.1.0 [2025-09-24 07:02:37.242] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:02:37.353] j-A [2025-09-24 07:02:44.693] The R5 Autosar Classic is running [2025-09-24 07:02:44.719] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:02:44.719] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:02:45.326] INIT: version 2.96 booting [2025-09-24 07:02:45.437] INIT: Entering runlevel: 5 [2025-09-24 07:02:45.598] mtd28 attached [2025-09-24 07:02:45.598] mtd24 attached [2025-09-24 07:02:45.614] mtd32 attached [2025-09-24 07:02:45.661] ubi0:animations is mounted. [2025-09-24 07:02:45.732] RTNETLINK answers: File exists [2025-09-24 07:02:45.732] ubi1:textures is mounted. [2025-09-24 07:02:45.732] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:02:45.732] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:02:45.732] ubi2:dml_code is mounted. [2025-09-24 07:02:45.732] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:02:45.732] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:02:45.732] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:02:45.732] data.LB_FadeInType0=100 [2025-09-24 07:02:45.732] data.CHLH_FadeInType0=0 [2025-09-24 07:02:45.732] data.WU_FadeInDelay=0 [2025-09-24 07:02:45.732] max_time_out=0 [2025-09-24 07:02:45.732] No splash screen [2025-09-24 07:02:45.732] stop dss Done [2025-09-24 07:02:45.781] /dev/mem opened. [2025-09-24 07:02:45.818] Memory mapped at address 0xffff9d0af000. [2025-09-24 07:02:45.818] Read at address 0x00600018 (0xffff9d0af018): 0x00000000 [2025-09-24 07:02:45.818] Write at address 0x00600018 (0xffff9d0af018): 0x00400040, readback 0x00400040 [2025-09-24 07:02:45.818] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:02:45.818] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:02:45.993] Loaded PowerVR consumer services. [2025-09-24 07:02:46.057] 512+0 records in [2025-09-24 07:02:46.057] 512+0 records out [2025-09-24 07:02:46.073] Waiting data available... [2025-09-24 07:02:46.105] Starting syslogd/klogd: done [2025-09-24 07:02:46.121] DML Start [2025-09-24 07:02:46.297] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:02:46.537] DML res1: 0 [2025-09-24 07:02:46.953] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:02:46.969] Read Success [2025-09-24 07:02:46.969] Verifying certificate... [2025-09-24 07:02:47.256] Verified OK [2025-09-24 07:02:47.289] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:02:49.105] Verified OK [2025-09-24 07:02:49.105] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:02:49.601] Verified OK [2025-09-24 07:02:49.601] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:02:52.031] fs.protected_hardlinks = 1 [2025-09-24 07:02:52.047] fs.protected_symlinks = 1 [2025-09-24 07:02:52.047] kernel.modules_disabled = 1 [2025-09-24 07:02:52.238] [2025-09-24 07:02:52.238] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:02:53.626] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:03:01.434] SBL1:1210.0.1.0 [2025-09-24 07:03:01.466] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:03:03.049] SBL2:1210.0.1.0 [2025-09-24 07:03:03.080] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:03:03.192] j-A [2025-09-24 07:03:10.564] The R5 Autosar Classic is running [2025-09-24 07:03:10.564] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:03:10.564] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:03:11.171] INIT: version 2.96 booting [2025-09-24 07:03:11.284] INIT: Entering runlevel: 5 [2025-09-24 07:03:11.427] mtd24 attached [2025-09-24 07:03:11.443] mtd32 attached [2025-09-24 07:03:11.459] mtd28 attached [2025-09-24 07:03:11.491] ubi0:textures is mounted. [2025-09-24 07:03:11.507] RTNETLINK answers: File exists [2025-09-24 07:03:11.507] ubi1:dml_code is mounted. [2025-09-24 07:03:11.559] ubi2:animations is mounted. [2025-09-24 07:03:11.559] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:03:11.559] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:03:11.559] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:03:11.559] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:03:11.559] data.LB_FadeInType0=100 [2025-09-24 07:03:11.559] data.CHLH_FadeInType0=0 [2025-09-24 07:03:11.559] data.WU_FadeInDelay=0 [2025-09-24 07:03:11.559] max_time_out=0 [2025-09-24 07:03:11.559] No splash screen [2025-09-24 07:03:11.559] stop dss Done [2025-09-24 07:03:11.559] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:03:11.638] /dev/mem opened. [2025-09-24 07:03:11.638] Memory mapped at address 0xffff95621000. [2025-09-24 07:03:11.638] Read at address 0x00600018 (0xffff95621018): 0x00000000 [2025-09-24 07:03:11.638] Write at address 0x00600018 (0xffff95621018): 0x00400040, readback 0x00400040 [2025-09-24 07:03:11.638] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:03:11.638] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:03:11.717] Loaded PowerVR consumer services. [2025-09-24 07:03:11.874] 512+0 records in [2025-09-24 07:03:11.874] 512+0 records out [2025-09-24 07:03:11.874] Waiting data available... [2025-09-24 07:03:11.906] Starting syslogd/klogd: done [2025-09-24 07:03:11.922] DML Start [2025-09-24 07:03:12.114] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:03:12.337] DML res1: 0 [2025-09-24 07:03:12.801] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:03:12.817] Read Success [2025-09-24 07:03:12.817] Verifying certificate... [2025-09-24 07:03:13.089] Verified OK [2025-09-24 07:03:13.105] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:03:14.698] Verified OK [2025-09-24 07:03:14.698] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:03:15.317] Verified OK [2025-09-24 07:03:15.317] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:03:17.857] fs.protected_hardlinks = 1 [2025-09-24 07:03:17.857] fs.protected_symlinks = 1 [2025-09-24 07:03:17.857] kernel.modules_disabled = 1 [2025-09-24 07:03:18.033] [2025-09-24 07:03:18.033] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:03:19.417] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:03:27.285] SBL1:1210.0.1.0 [2025-09-24 07:03:27.333] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:03:28.900] SBL2:1210.0.1.0 [2025-09-24 07:03:28.932] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:03:29.044] j-A [2025-09-24 07:03:36.399] The R5 Autosar Classic is running [2025-09-24 07:03:36.399] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:03:36.420] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:03:37.028] INIT: version 2.96 booting [2025-09-24 07:03:37.140] INIT: Entering runlevel: 5 [2025-09-24 07:03:37.284] mtd32 attached [2025-09-24 07:03:37.300] mtd28 attached [2025-09-24 07:03:37.300] mtd24 attached [2025-09-24 07:03:37.363] RTNETLINK answers: File exists [2025-09-24 07:03:37.402] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:03:37.402] ubi1:animations is mounted. [2025-09-24 07:03:37.402] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:03:37.402] ubi0:dml_code is mounted. [2025-09-24 07:03:37.402] ubi2:textures is mounted. [2025-09-24 07:03:37.402] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:03:37.402] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:03:37.402] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:03:37.426] data.LB_FadeInType0=100 [2025-09-24 07:03:37.426] data.CHLH_FadeInType0=0 [2025-09-24 07:03:37.426] data.WU_FadeInDelay=0 [2025-09-24 07:03:37.426] max_time_out=0 [2025-09-24 07:03:37.426] No splash screen [2025-09-24 07:03:37.426] stop dss Done [2025-09-24 07:03:37.457] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:03:37.457] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:03:37.512] /dev/mem opened. [2025-09-24 07:03:37.512] Memory mapped at address 0xffff9cbd5000. [2025-09-24 07:03:37.512] Read at address 0x00600018 (0xffff9cbd5018): 0x00000000 [2025-09-24 07:03:37.512] Write at address 0x00600018 (0xffff9cbd5018): 0x00400040, readback 0x00400040 [2025-09-24 07:03:37.593] Loaded PowerVR consumer services. [2025-09-24 07:03:37.720] Waiting data available... [2025-09-24 07:03:37.720] 512+0 records in [2025-09-24 07:03:37.736] 512+0 records out [2025-09-24 07:03:37.752] Starting syslogd/klogd: done [2025-09-24 07:03:37.768] DML Start [2025-09-24 07:03:37.961] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:03:38.216] DML res1: 0 [2025-09-24 07:03:38.584] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:03:38.606] Read Success [2025-09-24 07:03:38.606] Verifying certificate... [2025-09-24 07:03:38.846] Verified OK [2025-09-24 07:03:38.862] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:03:40.616] Verified OK [2025-09-24 07:03:40.616] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:03:41.255] Verified OK [2025-09-24 07:03:41.255] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:03:43.829] fs.protected_hardlinks = 1 [2025-09-24 07:03:43.829] fs.protected_symlinks = 1 [2025-09-24 07:03:43.845] kernel.modules_disabled = 1 [2025-09-24 07:03:44.052] [2025-09-24 07:03:44.052] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:03:45.293] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:03:53.151] SBL1:1210.0.1.0 [2025-09-24 07:03:53.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:03:54.765] SBL2:1210.0.1.0 [2025-09-24 07:03:54.813] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:03:54.909] j-A [2025-09-24 07:04:02.264] The R5 Autosar Classic is running [2025-09-24 07:04:02.286] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:04:02.286] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:04:02.894] INIT: version 2.96 booting [2025-09-24 07:04:03.006] INIT: Entering runlevel: 5 [2025-09-24 07:04:03.150] mtd24 attached [2025-09-24 07:04:03.166] mtd32 attached [2025-09-24 07:04:03.182] mtd28 attached [2025-09-24 07:04:03.198] ubi0:textures is mounted. [2025-09-24 07:04:03.230] RTNETLINK answers: File exists [2025-09-24 07:04:03.261] ubi2:animations is mounted. [2025-09-24 07:04:03.261] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:04:03.261] ubi1:dml_code is mounted. [2025-09-24 07:04:03.261] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:04:03.261] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:04:03.294] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:04:03.294] data.LB_FadeInType0=100 [2025-09-24 07:04:03.294] data.CHLH_FadeInType0=0 [2025-09-24 07:04:03.294] data.WU_FadeInDelay=0 [2025-09-24 07:04:03.294] max_time_out=0 [2025-09-24 07:04:03.294] No splash screen [2025-09-24 07:04:03.294] stop dss Done [2025-09-24 07:04:03.294] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:04:03.363] /dev/mem opened. [2025-09-24 07:04:03.363] Memory mapped at address 0xffff99768000. [2025-09-24 07:04:03.363] Read at address 0x00600018 (0xffff99768018): 0x00000000 [2025-09-24 07:04:03.363] Write at address 0x00600018 (0xffff99768018): 0x00400040, readback 0x00400040 [2025-09-24 07:04:03.378] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:04:03.394] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:04:03.490] Loaded PowerVR consumer services. [2025-09-24 07:04:03.609] Waiting data available... [2025-09-24 07:04:03.609] 512+0 records in [2025-09-24 07:04:03.609] 512+0 records out [2025-09-24 07:04:03.625] Starting syslogd/klogd: done [2025-09-24 07:04:03.641] DML Start [2025-09-24 07:04:03.817] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:04:04.041] DML res1: 0 [2025-09-24 07:04:04.516] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:04:04.516] Read Success [2025-09-24 07:04:04.516] Verifying certificate... [2025-09-24 07:04:04.756] Verified OK [2025-09-24 07:04:04.772] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:04:06.602] Verified OK [2025-09-24 07:04:06.602] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:04:07.144] Verified OK [2025-09-24 07:04:07.144] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:04:09.606] fs.protected_hardlinks = 1 [2025-09-24 07:04:09.622] fs.protected_symlinks = 1 [2025-09-24 07:04:09.622] kernel.modules_disabled = 1 [2025-09-24 07:04:09.830] [2025-09-24 07:04:09.830] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:04:11.135] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:04:19.004] SBL1:1210.0.1.0 [2025-09-24 07:04:19.036] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:04:20.619] SBL2:1210.0.1.0 [2025-09-24 07:04:20.651] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:04:20.762] j-A [2025-09-24 07:04:28.133] The R5 Autosar Classic is running [2025-09-24 07:04:28.133] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:04:28.133] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:04:28.741] INIT: version 2.96 booting [2025-09-24 07:04:28.853] INIT: Entering runlevel: 5 [2025-09-24 07:04:28.996] mtd24 attached [2025-09-24 07:04:29.012] mtd28 attached [2025-09-24 07:04:29.012] mtd32 attached [2025-09-24 07:04:29.060] ubi0:textures is mounted. [2025-09-24 07:04:29.076] RTNETLINK answers: File exists [2025-09-24 07:04:29.076] ubi2:dml_code is mounted. [2025-09-24 07:04:29.129] ubi1:animations is mounted. [2025-09-24 07:04:29.129] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:04:29.129] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:04:29.129] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:04:29.129] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:04:29.129] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:04:29.129] data.LB_FadeInType0=100 [2025-09-24 07:04:29.129] data.CHLH_FadeInType0=0 [2025-09-24 07:04:29.129] data.WU_FadeInDelay=0 [2025-09-24 07:04:29.129] max_time_out=0 [2025-09-24 07:04:29.129] No splash screen [2025-09-24 07:04:29.129] stop dss Done [2025-09-24 07:04:29.176] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:04:29.213] /dev/mem opened. [2025-09-24 07:04:29.213] Memory mapped at address 0xffff83fe5000. [2025-09-24 07:04:29.213] Read at address 0x00600018 (0xffff83fe5018): 0x00000000 [2025-09-24 07:04:29.213] Write at address 0x00600018 (0xffff83fe5018): 0x00400040, readback 0x00400040 [2025-09-24 07:04:29.213] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:04:29.341] Loaded PowerVR consumer services. [2025-09-24 07:04:29.437] 512+0 records in [2025-09-24 07:04:29.437] 512+0 records out [2025-09-24 07:04:29.452] Waiting data available... [2025-09-24 07:04:29.485] Starting syslogd/klogd: done [2025-09-24 07:04:29.501] DML Start [2025-09-24 07:04:29.677] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:04:29.884] DML res1: 0 [2025-09-24 07:04:30.348] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:04:30.369] Read Success [2025-09-24 07:04:30.369] Verifying certificate... [2025-09-24 07:04:30.609] Verified OK [2025-09-24 07:04:30.625] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:04:32.193] Verified OK [2025-09-24 07:04:32.193] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:04:32.768] Verified OK [2025-09-24 07:04:32.768] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:04:35.519] fs.protected_hardlinks = 1 [2025-09-24 07:04:35.519] fs.protected_symlinks = 1 [2025-09-24 07:04:35.535] kernel.modules_disabled = 1 [2025-09-24 07:04:35.727] [2025-09-24 07:04:35.727] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:04:36.987] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:04:44.874] SBL1:1210.0.1.0 [2025-09-24 07:04:44.922] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:04:46.505] SBL2:1210.0.1.0 [2025-09-24 07:04:46.536] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:04:46.633] j-A [2025-09-24 07:04:53.987] The R5 Autosar Classic is running [2025-09-24 07:04:54.011] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:04:54.011] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:04:54.619] INIT: version 2.96 booting [2025-09-24 07:04:54.731] INIT: Entering runlevel: 5 [2025-09-24 07:04:54.891] mtd24 attached [2025-09-24 07:04:54.891] mtd28 attached [2025-09-24 07:04:54.907] mtd32 attached [2025-09-24 07:04:54.954] RTNETLINK answers: File exists [2025-09-24 07:04:54.954] ubi1:animations is mounted. [2025-09-24 07:04:54.995] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:04:54.995] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:04:54.995] ubi0:textures is mounted. [2025-09-24 07:04:54.995] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:04:54.995] ubi2:dml_code is mounted. [2025-09-24 07:04:54.995] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:04:54.995] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:04:55.019] data.LB_FadeInType0=100 [2025-09-24 07:04:55.019] data.CHLH_FadeInType0=0 [2025-09-24 07:04:55.019] data.WU_FadeInDelay=0 [2025-09-24 07:04:55.019] max_time_out=0 [2025-09-24 07:04:55.019] No splash screen [2025-09-24 07:04:55.019] stop dss Done [2025-09-24 07:04:55.067] /dev/mem opened. [2025-09-24 07:04:55.104] Memory mapped at address 0xffffb0bdb000. [2025-09-24 07:04:55.104] Read at address 0x00600018 (0xffffb0bdb018): 0x00000000 [2025-09-24 07:04:55.104] Write at address 0x00600018 (0xffffb0bdb018): 0x00400040, readback 0x00400040 [2025-09-24 07:04:55.104] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:04:55.104] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:04:55.183] Loaded PowerVR consumer services. [2025-09-24 07:04:55.311] 512+0 records in [2025-09-24 07:04:55.328] 512+0 records out [2025-09-24 07:04:55.328] Waiting data available... [2025-09-24 07:04:55.360] Starting syslogd/klogd: done [2025-09-24 07:04:55.376] DML Start [2025-09-24 07:04:55.583] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:04:55.807] DML res1: 0 [2025-09-24 07:04:56.202] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:04:56.202] Read Success [2025-09-24 07:04:56.202] Verifying certificate... [2025-09-24 07:04:56.441] Verified OK [2025-09-24 07:04:56.457] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:04:58.254] Verified OK [2025-09-24 07:04:58.254] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:04:58.856] Verified OK [2025-09-24 07:04:58.856] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:05:01.429] fs.protected_hardlinks = 1 [2025-09-24 07:05:01.429] fs.protected_symlinks = 1 [2025-09-24 07:05:01.429] kernel.modules_disabled = 1 [2025-09-24 07:05:01.620] [2025-09-24 07:05:01.620] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:05:02.882] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:05:10.712] SBL1:1210.0.1.0 [2025-09-24 07:05:10.760] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:05:12.327] SBL2:1210.0.1.0 [2025-09-24 07:05:12.359] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:05:12.471] j-A [2025-09-24 07:05:19.846] The R5 Autosar Classic is running [2025-09-24 07:05:19.846] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:05:19.846] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:05:20.454] INIT: version 2.96 booting [2025-09-24 07:05:20.565] INIT: Entering runlevel: 5 [2025-09-24 07:05:20.727] mtd24 attached [2025-09-24 07:05:20.727] mtd28 attached [2025-09-24 07:05:20.743] mtd32 attached [2025-09-24 07:05:20.790] ubi0:textures is mounted. [2025-09-24 07:05:20.790] RTNETLINK answers: File exists [2025-09-24 07:05:20.846] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:05:20.846] ubi1:animations is mounted. [2025-09-24 07:05:20.846] ubi2:dml_code is mounted. [2025-09-24 07:05:20.846] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:05:20.846] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:05:20.846] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:05:20.846] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:05:20.846] data.LB_FadeInType0=100 [2025-09-24 07:05:20.846] data.CHLH_FadeInType0=0 [2025-09-24 07:05:20.846] data.WU_FadeInDelay=0 [2025-09-24 07:05:20.846] max_time_out=0 [2025-09-24 07:05:20.846] No splash screen [2025-09-24 07:05:20.846] stop dss Done [2025-09-24 07:05:20.877] /dev/mem opened. [2025-09-24 07:05:20.877] Memory mapped at address 0xffff821bc000. [2025-09-24 07:05:20.903] Read at address 0x00600018 (0xffff821bc018): 0x00000000 [2025-09-24 07:05:20.903] Write at address 0x00600018 (0xffff821bc018): 0x00400040, readback 0x00400040 [2025-09-24 07:05:20.919] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:05:20.919] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:05:21.142] Loaded PowerVR consumer services. [2025-09-24 07:05:21.174] 512+0 records in [2025-09-24 07:05:21.174] 512+0 records out [2025-09-24 07:05:21.190] Waiting data available... [2025-09-24 07:05:21.222] Starting syslogd/klogd: done [2025-09-24 07:05:21.238] DML Start [2025-09-24 07:05:21.398] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:05:21.654] DML res1: 0 [2025-09-24 07:05:22.098] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:05:22.098] Read Success [2025-09-24 07:05:22.098] Verifying certificate... [2025-09-24 07:05:22.355] Verified OK [2025-09-24 07:05:22.371] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:05:24.107] Verified OK [2025-09-24 07:05:24.107] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:05:24.680] Verified OK [2025-09-24 07:05:24.680] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:05:27.254] fs.protected_hardlinks = 1 [2025-09-24 07:05:27.254] fs.protected_symlinks = 1 [2025-09-24 07:05:27.270] kernel.modules_disabled = 1 [2025-09-24 07:05:27.463] [2025-09-24 07:05:27.463] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:05:28.730] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:05:36.570] SBL1:1210.0.1.0 [2025-09-24 07:05:36.601] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:05:38.184] SBL2:1210.0.1.0 [2025-09-24 07:05:38.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:05:38.328] j-A [2025-09-24 07:05:45.666] The R5 Autosar Classic is running [2025-09-24 07:05:45.697] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:05:45.697] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:05:46.304] INIT: version 2.96 booting [2025-09-24 07:05:46.417] INIT: Entering runlevel: 5 [2025-09-24 07:05:46.561] mtd32 attached [2025-09-24 07:05:46.577] mtd24 attached [2025-09-24 07:05:46.593] mtd28 attached [2025-09-24 07:05:46.625] ubi1:textures is mounted. [2025-09-24 07:05:46.625] ubi0:dml_code is mounted. [2025-09-24 07:05:46.641] RTNETLINK answers: File exists [2025-09-24 07:05:46.700] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:05:46.700] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:05:46.700] ubi2:animations is mounted. [2025-09-24 07:05:46.700] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:05:46.700] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:05:46.700] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:05:46.700] data.LB_FadeInType0=100 [2025-09-24 07:05:46.700] data.CHLH_FadeInType0=0 [2025-09-24 07:05:46.700] data.WU_FadeInDelay=0 [2025-09-24 07:05:46.700] max_time_out=0 [2025-09-24 07:05:46.700] No splash screen [2025-09-24 07:05:46.700] stop dss Done [2025-09-24 07:05:46.747] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:05:46.747] /dev/mem opened. [2025-09-24 07:05:46.779] Memory mapped at address 0xffffbb412000. [2025-09-24 07:05:46.779] Read at address 0x00600018 (0xffffbb412018): 0x00000000 [2025-09-24 07:05:46.779] Write at address 0x00600018 (0xffffbb412018): 0x00400040, readback 0x00400040 [2025-09-24 07:05:46.779] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:05:46.892] Loaded PowerVR consumer services. [2025-09-24 07:05:47.003] 512+0 records in [2025-09-24 07:05:47.003] 512+0 records out [2025-09-24 07:05:47.003] Waiting data available... [2025-09-24 07:05:47.068] Starting syslogd/klogd: done [2025-09-24 07:05:47.084] DML Start [2025-09-24 07:05:47.227] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:05:47.451] DML res1: 0 [2025-09-24 07:05:47.956] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:05:47.956] Read Success [2025-09-24 07:05:47.956] Verifying certificate... [2025-09-24 07:05:48.180] Verified OK [2025-09-24 07:05:48.180] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:05:49.922] Verified OK [2025-09-24 07:05:49.922] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:05:50.511] Verified OK [2025-09-24 07:05:50.511] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:05:53.054] fs.protected_hardlinks = 1 [2025-09-24 07:05:53.054] fs.protected_symlinks = 1 [2025-09-24 07:05:53.070] kernel.modules_disabled = 1 [2025-09-24 07:05:53.262] [2025-09-24 07:05:53.262] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:05:54.579] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:06:02.400] SBL1:1210.0.1.0 [2025-09-24 07:06:02.448] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:06:04.015] SBL2:1210.0.1.0 [2025-09-24 07:06:04.063] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:06:04.158] j-A [2025-09-24 07:06:11.512] The R5 Autosar Classic is running [2025-09-24 07:06:11.536] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:06:11.536] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:06:12.144] INIT: version 2.96 booting [2025-09-24 07:06:12.256] INIT: Entering runlevel: 5 [2025-09-24 07:06:12.415] mtd24 attached [2025-09-24 07:06:12.415] mtd32 attached [2025-09-24 07:06:12.431] mtd28 attached [2025-09-24 07:06:12.479] RTNETLINK answers: File exists [2025-09-24 07:06:12.544] ubi0:textures is mounted. [2025-09-24 07:06:12.544] ubi1:dml_code is mounted. [2025-09-24 07:06:12.544] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:06:12.544] ubi2:animations is mounted. [2025-09-24 07:06:12.544] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:06:12.544] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:06:12.544] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:06:12.544] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:06:12.544] data.LB_FadeInType0=100 [2025-09-24 07:06:12.544] data.CHLH_FadeInType0=0 [2025-09-24 07:06:12.544] data.WU_FadeInDelay=0 [2025-09-24 07:06:12.544] max_time_out=0 [2025-09-24 07:06:12.544] No splash screen [2025-09-24 07:06:12.544] stop dss Done [2025-09-24 07:06:12.618] /dev/mem opened. [2025-09-24 07:06:12.618] Memory mapped at address 0xffffaf6bd000. [2025-09-24 07:06:12.618] Read at address 0x00600018 (0xffffaf6bd018): 0x00000000 [2025-09-24 07:06:12.618] Write at address 0x00600018 (0xffffaf6bd018): 0x00400040, readback 0x00400040 [2025-09-24 07:06:12.646] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:06:12.646] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:06:12.742] Loaded PowerVR consumer services. [2025-09-24 07:06:12.854] 512+0 records in [2025-09-24 07:06:12.854] 512+0 records out [2025-09-24 07:06:12.886] Starting syslogd/klogd: Waiting data available... [2025-09-24 07:06:12.902] done [2025-09-24 07:06:12.902] DML Start [2025-09-24 07:06:13.110] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:06:13.317] DML res1: 0 [2025-09-24 07:06:13.746] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:06:13.746] Read Success [2025-09-24 07:06:13.746] Verifying certificate... [2025-09-24 07:06:14.017] Verified OK [2025-09-24 07:06:14.033] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:06:15.711] Verified OK [2025-09-24 07:06:15.711] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:06:16.286] Verified OK [2025-09-24 07:06:16.286] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:06:18.877] fs.protected_hardlinks = 1 [2025-09-24 07:06:18.905] fs.protected_symlinks = 1 [2025-09-24 07:06:18.905] kernel.modules_disabled = 1 [2025-09-24 07:06:19.096] [2025-09-24 07:06:19.096] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:06:20.420] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:06:28.278] SBL1:1210.0.1.0 [2025-09-24 07:06:28.326] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:06:29.892] SBL2:1210.0.1.0 [2025-09-24 07:06:29.940] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:06:30.036] j-A [2025-09-24 07:06:37.391] The R5 Autosar Classic is running [2025-09-24 07:06:37.391] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:06:37.412] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:06:38.020] INIT: version 2.96 booting [2025-09-24 07:06:38.132] INIT: Entering runlevel: 5 [2025-09-24 07:06:38.292] mtd28 attached [2025-09-24 07:06:38.307] mtd24 attached [2025-09-24 07:06:38.323] mtd32 attached [2025-09-24 07:06:38.323] ubi0:animations is mounted. [2025-09-24 07:06:38.355] RTNETLINK answers: File exists [2025-09-24 07:06:38.406] ubi2:dml_code is mounted. [2025-09-24 07:06:38.406] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:06:38.406] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:06:38.406] ubi1:textures is mounted. [2025-09-24 07:06:38.406] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:06:38.406] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:06:38.406] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:06:38.406] data.LB_FadeInType0=100 [2025-09-24 07:06:38.406] data.CHLH_FadeInType0=0 [2025-09-24 07:06:38.427] data.WU_FadeInDelay=0 [2025-09-24 07:06:38.427] max_time_out=0 [2025-09-24 07:06:38.427] No splash screen [2025-09-24 07:06:38.427] stop dss Done [2025-09-24 07:06:38.459] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:06:38.475] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:06:38.511] /dev/mem opened. [2025-09-24 07:06:38.511] Memory mapped at address 0xffff9a8ce000. [2025-09-24 07:06:38.511] Read at address 0x00600018 (0xffff9a8ce018): 0x00000000 [2025-09-24 07:06:38.511] Write at address 0x00600018 (0xffff9a8ce018): 0x00400040, readback 0x00400040 [2025-09-24 07:06:38.639] Loaded PowerVR consumer services. [2025-09-24 07:06:38.735] 512+0 records in [2025-09-24 07:06:38.735] 512+0 records out [2025-09-24 07:06:38.751] Waiting data available... [2025-09-24 07:06:38.767] Starting syslogd/klogd: done [2025-09-24 07:06:38.783] DML Start [2025-09-24 07:06:38.991] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:06:39.215] DML res1: 0 [2025-09-24 07:06:39.636] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:06:39.636] Read Success [2025-09-24 07:06:39.636] Verifying certificate... [2025-09-24 07:06:39.860] Verified OK [2025-09-24 07:06:39.876] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:06:41.597] Verified OK [2025-09-24 07:06:41.597] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:06:42.197] Verified OK [2025-09-24 07:06:42.197] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:06:44.772] fs.protected_hardlinks = 1 [2025-09-24 07:06:44.772] fs.protected_symlinks = 1 [2025-09-24 07:06:44.788] kernel.modules_disabled = 1 [2025-09-24 07:06:44.980] [2025-09-24 07:06:44.980] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:06:46.283] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:06:54.137] SBL1:1210.0.1.0 [2025-09-24 07:06:54.185] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:06:55.753] SBL2:1210.0.1.0 [2025-09-24 07:06:55.801] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:06:55.896] j-A [2025-09-24 07:07:03.251] The R5 Autosar Classic is running [2025-09-24 07:07:03.273] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:07:03.273] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:07:03.880] INIT: version 2.96 booting [2025-09-24 07:07:03.992] INIT: Entering runlevel: 5 [2025-09-24 07:07:04.136] mtd24 attached [2025-09-24 07:07:04.151] mtd28 attached [2025-09-24 07:07:04.184] ubi0:textures is mounted. [2025-09-24 07:07:04.200] ubi1:animations is mounted. [2025-09-24 07:07:04.200] mtd32 attached [2025-09-24 07:07:04.216] RTNETLINK answers: File exists [2025-09-24 07:07:04.248] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:07:04.248] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:07:04.248] ubi2:dml_code is mounted. [2025-09-24 07:07:04.248] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:07:04.248] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:07:04.275] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:07:04.275] data.LB_FadeInType0=100 [2025-09-24 07:07:04.275] data.CHLH_FadeInType0=0 [2025-09-24 07:07:04.275] data.WU_FadeInDelay=0 [2025-09-24 07:07:04.275] max_time_out=0 [2025-09-24 07:07:04.275] No splash screen [2025-09-24 07:07:04.275] stop dss Done [2025-09-24 07:07:04.345] /dev/mem opened. [2025-09-24 07:07:04.345] Memory mapped at address 0xffffa91c0000. [2025-09-24 07:07:04.345] Read at address 0x00600018 (0xffffa91c0018): 0x00000000 [2025-09-24 07:07:04.345] Write at address 0x00600018 (0xffffa91c0018): 0x00400040, readback 0x00400040 [2025-09-24 07:07:04.345] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:07:04.361] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:07:04.552] Loaded PowerVR consumer services. [2025-09-24 07:07:04.585] 512+0 records in [2025-09-24 07:07:04.585] 512+0 records out [2025-09-24 07:07:04.601] Waiting data available... [2025-09-24 07:07:04.633] Starting syslogd/klogd: done [2025-09-24 07:07:04.649] DML Start [2025-09-24 07:07:04.808] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:07:05.032] DML res1: 0 [2025-09-24 07:07:05.541] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:07:05.541] Read Success [2025-09-24 07:07:05.541] Verifying certificate... [2025-09-24 07:07:05.813] Verified OK [2025-09-24 07:07:05.845] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:07:07.475] Verified OK [2025-09-24 07:07:07.492] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:07:08.145] Verified OK [2025-09-24 07:07:08.145] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:07:10.704] fs.protected_hardlinks = 1 [2025-09-24 07:07:10.720] fs.protected_symlinks = 1 [2025-09-24 07:07:10.720] kernel.modules_disabled = 1 [2025-09-24 07:07:10.927] [2025-09-24 07:07:10.927] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:07:12.140] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:07:19.959] SBL1:1210.0.1.0 [2025-09-24 07:07:20.007] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:07:21.574] SBL2:1210.0.1.0 [2025-09-24 07:07:21.622] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:07:21.719] j-A [2025-09-24 07:07:29.074] The R5 Autosar Classic is running [2025-09-24 07:07:29.097] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:07:29.097] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:07:29.704] INIT: version 2.96 booting [2025-09-24 07:07:29.816] INIT: Entering runlevel: 5 [2025-09-24 07:07:29.960] mtd24 attached [2025-09-24 07:07:29.976] mtd28 attached [2025-09-24 07:07:29.992] mtd32 attached [2025-09-24 07:07:30.040] ubi0:textures is mounted. [2025-09-24 07:07:30.040] RTNETLINK answers: File exists [2025-09-24 07:07:30.092] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:07:30.092] ubi1:animations is mounted. [2025-09-24 07:07:30.092] ubi2:dml_code is mounted. [2025-09-24 07:07:30.092] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:07:30.092] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:07:30.092] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:07:30.092] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:07:30.092] data.LB_FadeInType0=100 [2025-09-24 07:07:30.092] data.CHLH_FadeInType0=0 [2025-09-24 07:07:30.092] data.WU_FadeInDelay=0 [2025-09-24 07:07:30.092] max_time_out=0 [2025-09-24 07:07:30.092] No splash screen [2025-09-24 07:07:30.092] stop dss Done [2025-09-24 07:07:30.140] /dev/mem opened. [2025-09-24 07:07:30.191] Memory mapped at address 0xffff93942000. [2025-09-24 07:07:30.191] Read at address 0x00600018 (0xffff93942018): 0x00000000 [2025-09-24 07:07:30.191] Write at address 0x00600018 (0xffff93942018): 0x00400040, readback 0x00400040 [2025-09-24 07:07:30.191] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:07:30.191] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:07:30.271] Loaded PowerVR consumer services. [2025-09-24 07:07:30.419] 512+0 records in [2025-09-24 07:07:30.419] 512+0 records out [2025-09-24 07:07:30.419] Waiting data available... [2025-09-24 07:07:30.451] Starting syslogd/klogd: done [2025-09-24 07:07:30.484] DML Start [2025-09-24 07:07:30.628] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:07:30.852] DML res1: 0 [2025-09-24 07:07:31.342] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:07:31.342] Read Success [2025-09-24 07:07:31.342] Verifying certificate... [2025-09-24 07:07:31.565] Verified OK [2025-09-24 07:07:31.581] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:07:33.258] Verified OK [2025-09-24 07:07:33.258] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:07:33.881] Verified OK [2025-09-24 07:07:33.881] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:07:36.535] fs.protected_hardlinks = 1 [2025-09-24 07:07:36.551] fs.protected_symlinks = 1 [2025-09-24 07:07:36.551] kernel.modules_disabled = 1 [2025-09-24 07:07:36.727] [2025-09-24 07:07:36.727] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:07:37.987] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:07:45.813] SBL1:1210.0.1.0 [2025-09-24 07:07:45.844] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:07:47.428] SBL2:1210.0.1.0 [2025-09-24 07:07:47.459] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:07:47.571] j-A [2025-09-24 07:07:54.910] The R5 Autosar Classic is running [2025-09-24 07:07:54.935] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:07:54.935] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:07:55.543] INIT: version 2.96 booting [2025-09-24 07:07:55.655] INIT: Entering runlevel: 5 [2025-09-24 07:07:55.814] mtd24 attached [2025-09-24 07:07:55.814] mtd32 attached [2025-09-24 07:07:55.830] mtd28 attached [2025-09-24 07:07:55.878] RTNETLINK answers: File exists [2025-09-24 07:07:55.944] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:07:55.944] ubi2:animations is mounted. [2025-09-24 07:07:55.944] ubi0:textures is mounted. [2025-09-24 07:07:55.944] ubi1:dml_code is mounted. [2025-09-24 07:07:55.944] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:07:55.944] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:07:55.944] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:07:55.944] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:07:55.944] data.LB_FadeInType0=100 [2025-09-24 07:07:55.944] data.CHLH_FadeInType0=0 [2025-09-24 07:07:55.944] data.WU_FadeInDelay=0 [2025-09-24 07:07:55.944] max_time_out=0 [2025-09-24 07:07:55.944] No splash screen [2025-09-24 07:07:55.944] stop dss Done [2025-09-24 07:07:56.002] /dev/mem opened. [2025-09-24 07:07:56.002] Memory mapped at address 0xffff92782000. [2025-09-24 07:07:56.002] Read at address 0x00600018 (0xffff92782018): 0x00000000 [2025-09-24 07:07:56.002] Write at address 0x00600018 (0xffff92782018): 0x00400040, readback 0x00400040 [2025-09-24 07:07:56.002] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:07:56.032] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:07:56.224] Loaded PowerVR consumer services. [2025-09-24 07:07:56.255] Waiting data available... [2025-09-24 07:07:56.271] 512+0 records in [2025-09-24 07:07:56.271] 512+0 records out [2025-09-24 07:07:56.319] Starting syslogd/klogd: done [2025-09-24 07:07:56.335] DML Start [2025-09-24 07:07:56.495] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:07:56.703] DML res1: 0 [2025-09-24 07:07:57.198] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:07:57.219] Read Success [2025-09-24 07:07:57.219] Verifying certificate... [2025-09-24 07:07:57.459] Verified OK [2025-09-24 07:07:57.475] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:07:59.175] Verified OK [2025-09-24 07:07:59.175] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:07:59.735] Verified OK [2025-09-24 07:07:59.735] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:08:02.371] fs.protected_hardlinks = 1 [2025-09-24 07:08:02.371] fs.protected_symlinks = 1 [2025-09-24 07:08:02.371] kernel.modules_disabled = 1 [2025-09-24 07:08:02.546] [2025-09-24 07:08:02.546] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:08:03.842] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:08:11.665] SBL1:1210.0.1.0 [2025-09-24 07:08:11.697] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:08:13.280] SBL2:1210.0.1.0 [2025-09-24 07:08:13.312] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:08:13.424] j-A [2025-09-24 07:08:20.764] The R5 Autosar Classic is running [2025-09-24 07:08:20.795] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:08:20.795] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:08:21.403] INIT: version 2.96 booting [2025-09-24 07:08:21.514] INIT: Entering runlevel: 5 [2025-09-24 07:08:21.674] mtd24 attached [2025-09-24 07:08:21.674] mtd28 attached [2025-09-24 07:08:21.722] mtd32 attached [2025-09-24 07:08:21.722] ubi1:animations is mounted. [2025-09-24 07:08:21.738] ubi0:textures is mounted. [2025-09-24 07:08:21.754] RTNETLINK answers: File exists [2025-09-24 07:08:21.809] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:08:21.809] ubi2:dml_code is mounted. [2025-09-24 07:08:21.809] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:08:21.809] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:08:21.809] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:08:21.809] data.LB_FadeInType0=100 [2025-09-24 07:08:21.809] data.CHLH_FadeInType0=0 [2025-09-24 07:08:21.809] data.WU_FadeInDelay=0 [2025-09-24 07:08:21.809] max_time_out=0 [2025-09-24 07:08:21.809] No splash screen [2025-09-24 07:08:21.809] stop dss Done [2025-09-24 07:08:21.809] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:08:21.857] /dev/mem opened. [2025-09-24 07:08:21.857] Memory mapped at address 0xffff851be000. [2025-09-24 07:08:21.883] Read at address 0x00600018 (0xffff851be018): 0x00000000 [2025-09-24 07:08:21.883] Write at address 0x00600018 (0xffff851be018): 0x00400040, readback 0x00400040 [2025-09-24 07:08:21.883] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:08:21.905] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:08:22.017] Loaded PowerVR consumer services. [2025-09-24 07:08:22.129] 512+0 records in [2025-09-24 07:08:22.129] 512+0 records out [2025-09-24 07:08:22.145] Waiting data available... [2025-09-24 07:08:22.161] Starting syslogd/klogd: done [2025-09-24 07:08:22.176] DML Start [2025-09-24 07:08:22.353] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:08:22.592] DML res1: 0 [2025-09-24 07:08:23.073] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:08:23.089] Read Success [2025-09-24 07:08:23.089] Verifying certificate... [2025-09-24 07:08:23.344] Verified OK [2025-09-24 07:08:23.360] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:08:25.051] Verified OK [2025-09-24 07:08:25.051] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:08:25.687] Verified OK [2025-09-24 07:08:25.687] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:08:28.230] fs.protected_hardlinks = 1 [2025-09-24 07:08:28.246] fs.protected_symlinks = 1 [2025-09-24 07:08:28.246] kernel.modules_disabled = 1 [2025-09-24 07:08:28.453] [2025-09-24 07:08:28.453] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:08:29.684] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:08:37.470] SBL1:1210.0.1.0 [2025-09-24 07:08:37.518] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:08:39.085] SBL2:1210.0.1.0 [2025-09-24 07:08:39.133] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:08:39.228] j-A [2025-09-24 07:08:46.584] The R5 Autosar Classic is running [2025-09-24 07:08:46.584] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:08:46.605] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:08:47.213] INIT: version 2.96 booting [2025-09-24 07:08:47.325] INIT: Entering runlevel: 5 [2025-09-24 07:08:47.484] mtd28 attached [2025-09-24 07:08:47.484] mtd24 attached [2025-09-24 07:08:47.500] mtd32 attached [2025-09-24 07:08:47.549] ubi0:animations is mounted. [2025-09-24 07:08:47.549] RTNETLINK answers: File exists [2025-09-24 07:08:47.589] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:08:47.589] ubi1:textures is mounted. [2025-09-24 07:08:47.589] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:08:47.589] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:08:47.589] ubi2:dml_code is mounted. [2025-09-24 07:08:47.589] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:08:47.589] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:08:47.612] data.LB_FadeInType0=100 [2025-09-24 07:08:47.612] data.CHLH_FadeInType0=0 [2025-09-24 07:08:47.612] data.WU_FadeInDelay=0 [2025-09-24 07:08:47.612] max_time_out=0 [2025-09-24 07:08:47.612] No splash screen [2025-09-24 07:08:47.612] stop dss Done [2025-09-24 07:08:47.687] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:08:47.687] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:08:47.687] /dev/mem opened. [2025-09-24 07:08:47.687] Memory mapped at address 0xffff9e7a2000. [2025-09-24 07:08:47.687] Read at address 0x00600018 (0xffff9e7a2018): 0x00000000 [2025-09-24 07:08:47.687] Write at address 0x00600018 (0xffff9e7a2018): 0x00400040, readback 0x00400040 [2025-09-24 07:08:47.784] Loaded PowerVR consumer services. [2025-09-24 07:08:47.911] Waiting data available... [2025-09-24 07:08:47.928] 512+0 records in [2025-09-24 07:08:47.928] 512+0 records out [2025-09-24 07:08:47.975] Starting syslogd/klogd: done [2025-09-24 07:08:47.991] DML Start [2025-09-24 07:08:48.167] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:08:48.391] DML res1: 0 [2025-09-24 07:08:48.833] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:08:48.833] Read Success [2025-09-24 07:08:48.833] Verifying certificate... [2025-09-24 07:08:49.073] Verified OK [2025-09-24 07:08:49.073] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:08:50.736] Verified OK [2025-09-24 07:08:50.736] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:08:51.369] Verified OK [2025-09-24 07:08:51.369] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:08:54.071] fs.protected_hardlinks = 1 [2025-09-24 07:08:54.087] fs.protected_symlinks = 1 [2025-09-24 07:08:54.087] kernel.modules_disabled = 1 [2025-09-24 07:08:54.311] [2025-09-24 07:08:54.311] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:08:55.490] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:09:03.292] SBL1:1210.0.1.0 [2025-09-24 07:09:03.340] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:09:04.907] SBL2:1210.0.1.0 [2025-09-24 07:09:04.955] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:09:05.051] j-A [2025-09-24 07:09:12.407] The R5 Autosar Classic is running [2025-09-24 07:09:12.428] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:09:12.428] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:09:13.037] INIT: version 2.96 booting [2025-09-24 07:09:13.149] INIT: Entering runlevel: 5 [2025-09-24 07:09:13.308] mtd28 attached [2025-09-24 07:09:13.308] mtd24 attached [2025-09-24 07:09:13.324] mtd32 attached [2025-09-24 07:09:13.373] ubi0:animations is mounted. [2025-09-24 07:09:13.438] RTNETLINK answers: File exists [2025-09-24 07:09:13.438] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:09:13.438] ubi2:dml_code is mounted. [2025-09-24 07:09:13.438] ubi1:textures is mounted. [2025-09-24 07:09:13.438] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:09:13.438] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:09:13.438] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:09:13.438] data.LB_FadeInType0=100 [2025-09-24 07:09:13.438] data.CHLH_FadeInType0=0 [2025-09-24 07:09:13.438] data.WU_FadeInDelay=0 [2025-09-24 07:09:13.438] max_time_out=0 [2025-09-24 07:09:13.438] No splash screen [2025-09-24 07:09:13.438] stop dss Done [2025-09-24 07:09:13.438] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:09:13.470] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:09:13.511] /dev/mem opened. [2025-09-24 07:09:13.511] Memory mapped at address 0xffff8800f000. [2025-09-24 07:09:13.511] Read at address 0x00600018 (0xffff8800f018): 0x00000000 [2025-09-24 07:09:13.511] Write at address 0x00600018 (0xffff8800f018): 0x00400040, readback 0x00400040 [2025-09-24 07:09:13.511] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:09:13.607] Loaded PowerVR consumer services. [2025-09-24 07:09:13.757] 512+0 records in [2025-09-24 07:09:13.757] 512+0 records out [2025-09-24 07:09:13.757] Waiting data available... [2025-09-24 07:09:13.805] Starting syslogd/klogd: done [2025-09-24 07:09:13.821] DML Start [2025-09-24 07:09:13.965] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:09:14.173] DML res1: 0 [2025-09-24 07:09:14.709] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:09:14.709] Read Success [2025-09-24 07:09:14.709] Verifying certificate... [2025-09-24 07:09:14.948] Verified OK [2025-09-24 07:09:14.964] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:09:16.628] Verified OK [2025-09-24 07:09:16.628] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:09:17.282] Verified OK [2025-09-24 07:09:17.282] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:09:19.917] fs.protected_hardlinks = 1 [2025-09-24 07:09:19.917] fs.protected_symlinks = 1 [2025-09-24 07:09:19.917] kernel.modules_disabled = 1 [2025-09-24 07:09:20.092] [2025-09-24 07:09:20.092] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:09:21.316] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:09:29.129] SBL1:1210.0.1.0 [2025-09-24 07:09:29.177] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:09:30.743] SBL2:1210.0.1.0 [2025-09-24 07:09:30.791] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:09:30.887] j-A [2025-09-24 07:09:38.242] The R5 Autosar Classic is running [2025-09-24 07:09:38.242] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:09:38.262] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:09:38.870] INIT: version 2.96 booting [2025-09-24 07:09:38.982] INIT: Entering runlevel: 5 [2025-09-24 07:09:39.142] mtd28 attached [2025-09-24 07:09:39.158] mtd24 attached [2025-09-24 07:09:39.174] mtd32 attached [2025-09-24 07:09:39.190] ubi0:animations is mounted. [2025-09-24 07:09:39.206] ubi1:textures is mounted. [2025-09-24 07:09:39.223] RTNETLINK answers: File exists [2025-09-24 07:09:39.223] ubi2:dml_code is mounted. [2025-09-24 07:09:39.275] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:09:39.275] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:09:39.275] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:09:39.275] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:09:39.275] data.LB_FadeInType0=100 [2025-09-24 07:09:39.275] data.CHLH_FadeInType0=0 [2025-09-24 07:09:39.275] data.WU_FadeInDelay=0 [2025-09-24 07:09:39.275] max_time_out=0 [2025-09-24 07:09:39.275] No splash screen [2025-09-24 07:09:39.275] stop dss Done [2025-09-24 07:09:39.275] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:09:39.354] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:09:39.354] /dev/mem opened. [2025-09-24 07:09:39.354] Memory mapped at address 0xffff9000d000. [2025-09-24 07:09:39.354] Read at address 0x00600018 (0xffff9000d018): 0x00000000 [2025-09-24 07:09:39.354] Write at address 0x00600018 (0xffff9000d018): 0x00400040, readback 0x00400040 [2025-09-24 07:09:39.354] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:09:39.530] Loaded PowerVR consumer services. [2025-09-24 07:09:39.578] Waiting data available... [2025-09-24 07:09:39.594] 512+0 records in [2025-09-24 07:09:39.594] 512+0 records out [2025-09-24 07:09:39.641] Starting syslogd/klogd: done [2025-09-24 07:09:39.657] DML Start [2025-09-24 07:09:39.834] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:09:40.058] DML res1: 0 [2025-09-24 07:09:40.458] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:09:40.473] Read Success [2025-09-24 07:09:40.473] Verifying certificate... [2025-09-24 07:09:40.729] Verified OK [2025-09-24 07:09:40.745] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:09:42.324] Verified OK [2025-09-24 07:09:42.324] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:09:43.003] Verified OK [2025-09-24 07:09:43.003] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:09:45.705] fs.protected_hardlinks = 1 [2025-09-24 07:09:45.705] fs.protected_symlinks = 1 [2025-09-24 07:09:45.721] kernel.modules_disabled = 1 [2025-09-24 07:09:45.913] [2025-09-24 07:09:45.913] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:09:47.150] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:09:54.979] SBL1:1210.0.1.0 [2025-09-24 07:09:55.011] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:09:56.593] SBL2:1210.0.1.0 [2025-09-24 07:09:56.625] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:09:56.721] j-A [2025-09-24 07:10:04.075] The R5 Autosar Classic is running [2025-09-24 07:10:04.100] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:10:04.100] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:10:04.709] INIT: version 2.96 booting [2025-09-24 07:10:04.820] INIT: Entering runlevel: 5 [2025-09-24 07:10:04.981] mtd24 attached [2025-09-24 07:10:04.996] mtd28 attached [2025-09-24 07:10:05.028] ubi0:textures is mounted. [2025-09-24 07:10:05.044] ubi1:animations is mounted. [2025-09-24 07:10:05.044] mtd32 attached [2025-09-24 07:10:05.096] RTNETLINK answers: File exists [2025-09-24 07:10:05.096] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:10:05.096] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:10:05.096] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:10:05.096] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:10:05.096] ubi2:dml_code is mounted. [2025-09-24 07:10:05.096] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:10:05.124] data.LB_FadeInType0=100 [2025-09-24 07:10:05.124] data.CHLH_FadeInType0=0 [2025-09-24 07:10:05.124] data.WU_FadeInDelay=0 [2025-09-24 07:10:05.124] max_time_out=0 [2025-09-24 07:10:05.124] No splash screen [2025-09-24 07:10:05.124] stop dss Done [2025-09-24 07:10:05.166] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:10:05.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:10:05.166] /dev/mem opened. [2025-09-24 07:10:05.166] Memory mapped at address 0xffffa8dbc000. [2025-09-24 07:10:05.192] Read at address 0x00600018 (0xffffa8dbc018): 0x00000000 [2025-09-24 07:10:05.192] Write at address 0x00600018 (0xffffa8dbc018): 0x00400040, readback 0x00400040 [2025-09-24 07:10:05.336] Loaded PowerVR consumer services. [2025-09-24 07:10:05.432] 512+0 records in [2025-09-24 07:10:05.432] 512+0 records out [2025-09-24 07:10:05.448] Starting syslogd/klogd: Waiting data available... [2025-09-24 07:10:05.464] done [2025-09-24 07:10:05.464] DML Start [2025-09-24 07:10:05.640] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:10:05.912] DML res1: 0 [2025-09-24 07:10:06.334] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:10:06.334] Read Success [2025-09-24 07:10:06.334] Verifying certificate... [2025-09-24 07:10:06.557] Verified OK [2025-09-24 07:10:06.573] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:10:08.156] Verified OK [2025-09-24 07:10:08.156] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:10:08.891] Verified OK [2025-09-24 07:10:08.891] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:10:11.433] fs.protected_hardlinks = 1 [2025-09-24 07:10:11.449] fs.protected_symlinks = 1 [2025-09-24 07:10:11.449] kernel.modules_disabled = 1 [2025-09-24 07:10:11.641] [2025-09-24 07:10:11.641] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:10:12.984] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:10:20.806] SBL1:1210.0.1.0 [2025-09-24 07:10:20.838] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:10:22.422] SBL2:1210.0.1.0 [2025-09-24 07:10:22.454] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 07:10:22.566] j-A [2025-09-24 07:10:29.904] The R5 Autosar Classic is running [2025-09-24 07:10:29.935] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:10:29.935] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:10:30.543] INIT: version 2.96 booting [2025-09-24 07:10:30.654] INIT: Entering runlevel: 5 [2025-09-24 07:10:30.814] mtd32 attached [2025-09-24 07:10:30.814] mtd24 attached [2025-09-24 07:10:30.830] mtd28 attached [2025-09-24 07:10:30.846] ubi0:dml_code is mounted. [2025-09-24 07:10:30.933] RTNETLINK answers: File exists [2025-09-24 07:10:30.933] ubi2:animations is mounted. [2025-09-24 07:10:30.933] ubi1:textures is mounted. [2025-09-24 07:10:30.933] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:10:30.933] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:10:30.933] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:10:30.933] data.LB_FadeInType0=100 [2025-09-24 07:10:30.933] data.CHLH_FadeInType0=0 [2025-09-24 07:10:30.933] data.WU_FadeInDelay=0 [2025-09-24 07:10:30.933] max_time_out=0 [2025-09-24 07:10:30.933] No splash screen [2025-09-24 07:10:30.933] stop dss Done [2025-09-24 07:10:30.933] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:10:30.933] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:10:30.965] /dev/mem opened. [2025-09-24 07:10:30.965] Memory mapped at address 0xffff9dc6e000. [2025-09-24 07:10:30.997] Read at address 0x00600018 (0xffff9dc6e018): 0x00000000 [2025-09-24 07:10:30.997] Write at address 0x00600018 (0xffff9dc6e018): 0x00400040, readback 0x00400040 [2025-09-24 07:10:30.997] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:10:30.997] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:10:31.141] Loaded PowerVR consumer services. [2025-09-24 07:10:31.276] Waiting data available... [2025-09-24 07:10:31.276] 512+0 records in [2025-09-24 07:10:31.276] 512+0 records out [2025-09-24 07:10:31.292] Starting syslogd/klogd: done [2025-09-24 07:10:31.308] DML Start [2025-09-24 07:10:31.484] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:10:31.708] DML res1: 0 [2025-09-24 07:10:32.139] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:10:32.163] Read Success [2025-09-24 07:10:32.163] Verifying certificate... [2025-09-24 07:10:32.435] Verified OK [2025-09-24 07:10:32.451] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:10:34.095] Verified OK [2025-09-24 07:10:34.095] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:10:34.757] Verified OK [2025-09-24 07:10:34.757] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:10:37.394] fs.protected_hardlinks = 1 [2025-09-24 07:10:37.421] fs.protected_symlinks = 1 [2025-09-24 07:10:37.421] kernel.modules_disabled = 1 [2025-09-24 07:10:37.597] [2025-09-24 07:10:37.597] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:10:38.809] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:10:46.627] SBL1:1210.0.1.0 [2025-09-24 07:10:46.674] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:10:48.241] SBL2:1210.0.1.0 [2025-09-24 07:10:48.273] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:10:48.386] j-A [2025-09-24 07:10:55.759] The R5 Autosar Classic is running [2025-09-24 07:10:55.759] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:10:55.759] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:10:56.367] INIT: version 2.96 booting [2025-09-24 07:10:56.479] INIT: Entering runlevel: 5 [2025-09-24 07:10:56.622] mtd24 attached [2025-09-24 07:10:56.638] mtd28 attached [2025-09-24 07:10:56.654] mtd32 attached [2025-09-24 07:10:56.760] ubi1:animations is mounted. [2025-09-24 07:10:56.760] RTNETLINK answers: File exists [2025-09-24 07:10:56.760] ubi0:textures is mounted. [2025-09-24 07:10:56.760] ubi2:dml_code is mounted. [2025-09-24 07:10:56.760] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:10:56.760] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:10:56.760] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:10:56.760] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:10:56.760] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:10:56.760] data.LB_FadeInType0=100 [2025-09-24 07:10:56.760] data.CHLH_FadeInType0=0 [2025-09-24 07:10:56.760] data.WU_FadeInDelay=0 [2025-09-24 07:10:56.760] max_time_out=0 [2025-09-24 07:10:56.760] No splash screen [2025-09-24 07:10:56.760] stop dss Done [2025-09-24 07:10:56.807] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:10:56.847] /dev/mem opened. [2025-09-24 07:10:56.847] Memory mapped at address 0xffff97a87000. [2025-09-24 07:10:56.847] Read at address 0x00600018 (0xffff97a87018): 0x00000000 [2025-09-24 07:10:56.847] Write at address 0x00600018 (0xffff97a87018): 0x00400040, readback 0x00400040 [2025-09-24 07:10:56.847] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:10:57.040] Loaded PowerVR consumer services. [2025-09-24 07:10:57.071] 512+0 records in [2025-09-24 07:10:57.071] 512+0 records out [2025-09-24 07:10:57.103] Waiting data available... [2025-09-24 07:10:57.103] Starting syslogd/klogd: done [2025-09-24 07:10:57.135] DML Start [2025-09-24 07:10:57.311] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:10:57.535] DML res1: 0 [2025-09-24 07:10:57.950] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:10:57.971] Read Success [2025-09-24 07:10:57.971] Verifying certificate... [2025-09-24 07:10:58.227] Verified OK [2025-09-24 07:10:58.243] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:10:59.970] Verified OK [2025-09-24 07:10:59.970] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:11:00.654] Verified OK [2025-09-24 07:11:00.654] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:11:03.276] fs.protected_hardlinks = 1 [2025-09-24 07:11:03.292] fs.protected_symlinks = 1 [2025-09-24 07:11:03.292] kernel.modules_disabled = 1 [2025-09-24 07:11:03.501] [2025-09-24 07:11:03.501] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:11:04.632] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:11:12.446] SBL1:1210.0.1.0 [2025-09-24 07:11:12.478] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:11:14.061] SBL2:1210.0.1.0 [2025-09-24 07:11:14.092] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:11:14.204] j-A [2025-09-24 07:11:21.542] The R5 Autosar Classic is running [2025-09-24 07:11:21.574] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:11:21.574] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:11:22.180] INIT: version 2.96 booting [2025-09-24 07:11:22.293] INIT: Entering runlevel: 5 [2025-09-24 07:11:22.436] mtd24 attached [2025-09-24 07:11:22.452] mtd28 attached [2025-09-24 07:11:22.468] mtd32 attached [2025-09-24 07:11:22.516] RTNETLINK answers: File exists [2025-09-24 07:11:22.516] ubi0:textures is mounted. [2025-09-24 07:11:22.576] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:11:22.576] ubi1:animations is mounted. [2025-09-24 07:11:22.576] ubi2:dml_code is mounted. [2025-09-24 07:11:22.576] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:11:22.576] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:11:22.576] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:11:22.576] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:11:22.576] data.LB_FadeInType0=100 [2025-09-24 07:11:22.576] data.CHLH_FadeInType0=0 [2025-09-24 07:11:22.576] data.WU_FadeInDelay=0 [2025-09-24 07:11:22.576] max_time_out=0 [2025-09-24 07:11:22.576] No splash screen [2025-09-24 07:11:22.576] stop dss Done [2025-09-24 07:11:22.657] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:11:22.657] /dev/mem opened. [2025-09-24 07:11:22.657] Memory mapped at address 0xffff82605000. [2025-09-24 07:11:22.657] Read at address 0x00600018 (0xffff82605018): 0x00000000 [2025-09-24 07:11:22.657] Write at address 0x00600018 (0xffff82605018): 0x00400040, readback 0x00400040 [2025-09-24 07:11:22.657] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:11:22.864] Loaded PowerVR consumer services. [2025-09-24 07:11:22.897] Waiting data available... [2025-09-24 07:11:22.913] 512+0 records in [2025-09-24 07:11:22.913] 512+0 records out [2025-09-24 07:11:22.929] Starting syslogd/klogd: done [2025-09-24 07:11:22.960] DML Start [2025-09-24 07:11:23.152] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:11:23.376] DML res1: 0 [2025-09-24 07:11:23.791] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:11:23.808] Read Success [2025-09-24 07:11:23.808] Verifying certificate... [2025-09-24 07:11:24.047] Verified OK [2025-09-24 07:11:24.063] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:11:25.669] Verified OK [2025-09-24 07:11:25.669] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:11:26.331] Verified OK [2025-09-24 07:11:26.331] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:11:29.080] fs.protected_hardlinks = 1 [2025-09-24 07:11:29.096] fs.protected_symlinks = 1 [2025-09-24 07:11:29.096] kernel.modules_disabled = 1 [2025-09-24 07:11:29.288] [2025-09-24 07:11:29.288] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:11:30.435] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:11:38.252] SBL1:1210.0.1.0 [2025-09-24 07:11:38.300] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:11:39.867] SBL2:1210.0.1.0 [2025-09-24 07:11:39.899] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:11:40.011] j-A [2025-09-24 07:11:47.365] The R5 Autosar Classic is running [2025-09-24 07:11:47.365] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:11:47.386] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:11:47.994] INIT: version 2.96 booting [2025-09-24 07:11:48.105] INIT: Entering runlevel: 5 [2025-09-24 07:11:48.266] mtd24 attached [2025-09-24 07:11:48.281] mtd28 attached [2025-09-24 07:11:48.297] mtd32 attached [2025-09-24 07:11:48.313] ubi0:textures is mounted. [2025-09-24 07:11:48.394] RTNETLINK answers: File exists [2025-09-24 07:11:48.394] ubi2:dml_code is mounted. [2025-09-24 07:11:48.394] ubi1:animations is mounted. [2025-09-24 07:11:48.394] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:11:48.394] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:11:48.394] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:11:48.394] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:11:48.394] data.LB_FadeInType0=100 [2025-09-24 07:11:48.394] data.CHLH_FadeInType0=0 [2025-09-24 07:11:48.394] data.WU_FadeInDelay=0 [2025-09-24 07:11:48.394] max_time_out=0 [2025-09-24 07:11:48.394] No splash screen [2025-09-24 07:11:48.394] stop dss Done [2025-09-24 07:11:48.394] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:11:48.426] /dev/mem opened. [2025-09-24 07:11:48.426] Memory mapped at address 0xffffa7152000. [2025-09-24 07:11:48.458] Read at address 0x00600018 (0xffffa7152018): 0x00000000 [2025-09-24 07:11:48.458] Write at address 0x00600018 (0xffffa7152018): 0x00400040, readback 0x00400040 [2025-09-24 07:11:48.458] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:11:48.458] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:11:48.555] Loaded PowerVR consumer services. [2025-09-24 07:11:48.698] 512+0 records in [2025-09-24 07:11:48.698] 512+0 records out [2025-09-24 07:11:48.698] Waiting data available... [2025-09-24 07:11:48.746] Starting syslogd/klogd: done [2025-09-24 07:11:48.762] DML Start [2025-09-24 07:11:48.922] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:11:49.146] DML res1: 0 [2025-09-24 07:11:49.623] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:11:49.623] Read Success [2025-09-24 07:11:49.623] Verifying certificate... [2025-09-24 07:11:49.830] Verified OK [2025-09-24 07:11:49.846] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:11:51.484] Verified OK [2025-09-24 07:11:51.484] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:11:52.119] Verified OK [2025-09-24 07:11:52.119] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:11:54.837] fs.protected_hardlinks = 1 [2025-09-24 07:11:54.837] fs.protected_symlinks = 1 [2025-09-24 07:11:54.853] kernel.modules_disabled = 1 [2025-09-24 07:11:55.045] [2025-09-24 07:11:55.045] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:11:56.236] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:12:04.077] SBL1:1210.0.1.0 [2025-09-24 07:12:04.109] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:12:05.691] SBL2:1210.0.1.0 [2025-09-24 07:12:05.723] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:12:05.835] j-A [2025-09-24 07:12:13.206] The R5 Autosar Classic is running [2025-09-24 07:12:13.206] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:12:13.206] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:12:13.813] INIT: version 2.96 booting [2025-09-24 07:12:13.926] INIT: Entering runlevel: 5 [2025-09-24 07:12:14.086] mtd24 attached [2025-09-24 07:12:14.086] mtd32 attached [2025-09-24 07:12:14.102] mtd28 attached [2025-09-24 07:12:14.150] RTNETLINK answers: File exists [2025-09-24 07:12:14.166] ubi1:dml_code is mounted. [2025-09-24 07:12:14.166] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:12:14.219] ubi0:textures is mounted. [2025-09-24 07:12:14.219] ubi2:animations is mounted. [2025-09-24 07:12:14.219] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:12:14.219] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:12:14.219] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:12:14.219] data.LB_FadeInType0=100 [2025-09-24 07:12:14.219] data.CHLH_FadeInType0=0 [2025-09-24 07:12:14.219] data.WU_FadeInDelay=0 [2025-09-24 07:12:14.219] max_time_out=0 [2025-09-24 07:12:14.219] No splash screen [2025-09-24 07:12:14.219] stop dss Done [2025-09-24 07:12:14.219] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:12:14.289] /dev/mem opened. [2025-09-24 07:12:14.289] Memory mapped at address 0xffff923e3000. [2025-09-24 07:12:14.289] Read at address 0x00600018 (0xffff923e3018): 0x00000000 [2025-09-24 07:12:14.289] Write at address 0x00600018 (0xffff923e3018): 0x00400040, readback 0x00400040 [2025-09-24 07:12:14.289] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:12:14.289] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:12:14.449] Loaded PowerVR consumer services. [2025-09-24 07:12:14.545] Waiting data available... [2025-09-24 07:12:14.545] 512+0 records in [2025-09-24 07:12:14.545] 512+0 records out [2025-09-24 07:12:14.577] Starting syslogd/klogd: done [2025-09-24 07:12:14.609] DML Start [2025-09-24 07:12:14.785] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:12:14.992] DML res1: 0 [2025-09-24 07:12:15.438] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:12:15.438] Read Success [2025-09-24 07:12:15.438] Verifying certificate... [2025-09-24 07:12:15.710] Verified OK [2025-09-24 07:12:15.710] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:12:17.512] Verified OK [2025-09-24 07:12:17.512] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:12:18.103] Verified OK [2025-09-24 07:12:18.119] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:12:20.630] fs.protected_hardlinks = 1 [2025-09-24 07:12:20.630] fs.protected_symlinks = 1 [2025-09-24 07:12:20.646] kernel.modules_disabled = 1 [2025-09-24 07:12:20.838] [2025-09-24 07:12:20.838] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:12:22.121] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:12:29.898] SBL1:1210.0.1.0 [2025-09-24 07:12:29.930] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:12:31.514] SBL2:1210.0.1.0 [2025-09-24 07:12:31.546] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:12:31.657] j-A [2025-09-24 07:12:38.997] The R5 Autosar Classic is running [2025-09-24 07:12:39.028] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:12:39.028] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:12:39.635] INIT: version 2.96 booting [2025-09-24 07:12:39.731] INIT: Entering runlevel: 5 [2025-09-24 07:12:39.890] mtd24 attached [2025-09-24 07:12:39.906] mtd28 attached [2025-09-24 07:12:39.923] mtd32 attached [2025-09-24 07:12:39.955] ubi0:textures is mounted. [2025-09-24 07:12:39.997] RTNETLINK answers: File exists [2025-09-24 07:12:39.997] ubi1:animations is mounted. [2025-09-24 07:12:39.997] ubi2:dml_code is mounted. [2025-09-24 07:12:39.997] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:12:39.997] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:12:40.037] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:12:40.037] data.LB_FadeInType0=100 [2025-09-24 07:12:40.037] data.CHLH_FadeInType0=0 [2025-09-24 07:12:40.037] data.WU_FadeInDelay=0 [2025-09-24 07:12:40.037] max_time_out=0 [2025-09-24 07:12:40.037] No splash screen [2025-09-24 07:12:40.037] stop dss Done [2025-09-24 07:12:40.037] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:12:40.037] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:12:40.104] /dev/mem opened. [2025-09-24 07:12:40.104] Memory mapped at address 0xffff98410000. [2025-09-24 07:12:40.104] Read at address 0x00600018 (0xffff98410018): 0x00000000 [2025-09-24 07:12:40.104] Write at address 0x00600018 (0xffff98410018): 0x00400040, readback 0x00400040 [2025-09-24 07:12:40.136] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:12:40.152] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:12:40.216] Loaded PowerVR consumer services. [2025-09-24 07:12:40.344] 512+0 records in [2025-09-24 07:12:40.360] 512+0 records out [2025-09-24 07:12:40.360] Waiting data available... [2025-09-24 07:12:40.392] Starting syslogd/klogd: done [2025-09-24 07:12:40.408] DML Start [2025-09-24 07:12:40.584] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:12:40.823] DML res1: 0 [2025-09-24 07:12:41.222] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:12:41.222] Read Success [2025-09-24 07:12:41.222] Verifying certificate... [2025-09-24 07:12:41.430] Verified OK [2025-09-24 07:12:41.446] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:12:43.040] Verified OK [2025-09-24 07:12:43.040] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:12:43.661] Verified OK [2025-09-24 07:12:43.661] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:12:46.379] fs.protected_hardlinks = 1 [2025-09-24 07:12:46.379] fs.protected_symlinks = 1 [2025-09-24 07:12:46.395] kernel.modules_disabled = 1 [2025-09-24 07:12:46.571] [2025-09-24 07:12:46.571] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:12:47.923] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:12:55.697] SBL1:1210.0.1.0 [2025-09-24 07:12:55.729] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:12:57.311] SBL2:1210.0.1.0 [2025-09-24 07:12:57.343] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:12:57.455] j-A [2025-09-24 07:13:04.795] The R5 Autosar Classic is running [2025-09-24 07:13:04.820] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:13:04.820] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:13:05.427] INIT: version 2.96 booting [2025-09-24 07:13:05.539] INIT: Entering runlevel: 5 [2025-09-24 07:13:05.699] mtd28 attached [2025-09-24 07:13:05.715] mtd32 attached [2025-09-24 07:13:05.715] mtd24 attached [2025-09-24 07:13:05.763] ubi0:animations is mounted. [2025-09-24 07:13:05.779] RTNETLINK answers: File exists [2025-09-24 07:13:05.779] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:13:05.835] ubi2:textures is mounted. [2025-09-24 07:13:05.835] ubi1:dml_code is mounted. [2025-09-24 07:13:05.835] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:13:05.835] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:13:05.835] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:13:05.835] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:13:05.835] data.LB_FadeInType0=100 [2025-09-24 07:13:05.835] data.CHLH_FadeInType0=0 [2025-09-24 07:13:05.835] data.WU_FadeInDelay=0 [2025-09-24 07:13:05.835] max_time_out=0 [2025-09-24 07:13:05.835] No splash screen [2025-09-24 07:13:05.835] stop dss Done [2025-09-24 07:13:05.882] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:13:05.919] /dev/mem opened. [2025-09-24 07:13:05.919] Memory mapped at address 0xffff8809c000. [2025-09-24 07:13:05.919] Read at address 0x00600018 (0xffff8809c018): 0x00000000 [2025-09-24 07:13:05.919] Write at address 0x00600018 (0xffff8809c018): 0x00400040, readback 0x00400040 [2025-09-24 07:13:05.919] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:13:06.128] Loaded PowerVR consumer services. [2025-09-24 07:13:06.189] Waiting data available... [2025-09-24 07:13:06.189] 512+0 records in [2025-09-24 07:13:06.189] 512+0 records out [2025-09-24 07:13:06.221] Starting syslogd/klogd: done [2025-09-24 07:13:06.237] DML Start [2025-09-24 07:13:06.428] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:13:06.653] DML res1: 0 [2025-09-24 07:13:07.123] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:13:07.123] Read Success [2025-09-24 07:13:07.123] Verifying certificate... [2025-09-24 07:13:07.362] Verified OK [2025-09-24 07:13:07.378] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:13:09.073] Verified OK [2025-09-24 07:13:09.073] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:13:09.681] Verified OK [2025-09-24 07:13:09.681] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:13:12.287] fs.protected_hardlinks = 1 [2025-09-24 07:13:12.303] fs.protected_symlinks = 1 [2025-09-24 07:13:12.303] kernel.modules_disabled = 1 [2025-09-24 07:13:12.494] [2025-09-24 07:13:12.494] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:13:13.724] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:13:21.519] SBL1:1210.0.1.0 [2025-09-24 07:13:21.551] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:13:23.133] SBL2:1210.0.1.0 [2025-09-24 07:13:23.165] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:13:23.277] j-A [2025-09-24 07:13:30.617] The R5 Autosar Classic is running [2025-09-24 07:13:30.642] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:13:30.642] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:13:31.249] INIT: version 2.96 booting [2025-09-24 07:13:31.362] INIT: Entering runlevel: 5 [2025-09-24 07:13:31.521] mtd28 attached [2025-09-24 07:13:31.521] mtd24 attached [2025-09-24 07:13:31.553] mtd32 attached [2025-09-24 07:13:31.553] ubi0:animations is mounted. [2025-09-24 07:13:31.585] ubi1:textures is mounted. [2025-09-24 07:13:31.640] RTNETLINK answers: File exists [2025-09-24 07:13:31.640] ubi2:dml_code is mounted. [2025-09-24 07:13:31.640] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:13:31.640] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:13:31.640] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:13:31.640] data.LB_FadeInType0=100 [2025-09-24 07:13:31.640] data.CHLH_FadeInType0=0 [2025-09-24 07:13:31.640] data.WU_FadeInDelay=0 [2025-09-24 07:13:31.640] max_time_out=0 [2025-09-24 07:13:31.640] No splash screen [2025-09-24 07:13:31.640] stop dss Done [2025-09-24 07:13:31.640] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:13:31.640] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:13:31.714] /dev/mem opened. [2025-09-24 07:13:31.714] Memory mapped at address 0xffffadd14000. [2025-09-24 07:13:31.714] Read at address 0x00600018 (0xffffadd14018): 0x00000000 [2025-09-24 07:13:31.714] Write at address 0x00600018 (0xffffadd14018): 0x00400040, readback 0x00400040 [2025-09-24 07:13:31.714] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:13:31.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:13:31.922] Loaded PowerVR consumer services. [2025-09-24 07:13:31.969] Waiting data available... [2025-09-24 07:13:31.985] 512+0 records in [2025-09-24 07:13:31.985] 512+0 records out [2025-09-24 07:13:32.018] Starting syslogd/klogd: done [2025-09-24 07:13:32.034] DML Start [2025-09-24 07:13:32.209] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:13:32.497] DML res1: 0 [2025-09-24 07:13:32.874] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:13:32.874] Read Success [2025-09-24 07:13:32.874] Verifying certificate... [2025-09-24 07:13:33.130] Verified OK [2025-09-24 07:13:33.146] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:13:34.868] Verified OK [2025-09-24 07:13:34.868] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:13:35.502] Verified OK [2025-09-24 07:13:35.502] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:13:38.124] fs.protected_hardlinks = 1 [2025-09-24 07:13:38.140] fs.protected_symlinks = 1 [2025-09-24 07:13:38.140] kernel.modules_disabled = 1 [2025-09-24 07:13:38.332] [2025-09-24 07:13:38.332] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:13:39.529] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:13:47.304] SBL1:1210.0.1.0 [2025-09-24 07:13:47.336] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:13:48.919] SBL2:1210.0.1.0 [2025-09-24 07:13:48.951] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:13:49.063] j-A [2025-09-24 07:13:56.401] The R5 Autosar Classic is running [2025-09-24 07:13:56.426] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:13:56.426] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:13:57.034] INIT: version 2.96 booting [2025-09-24 07:13:57.146] INIT: Entering runlevel: 5 [2025-09-24 07:13:57.306] mtd28 attached [2025-09-24 07:13:57.306] mtd24 attached [2025-09-24 07:13:57.338] mtd32 attached [2025-09-24 07:13:57.354] ubi0:animations is mounted. [2025-09-24 07:13:57.370] RTNETLINK answers: File exists [2025-09-24 07:13:57.410] ubi1:textures is mounted. [2025-09-24 07:13:57.410] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:13:57.410] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:13:57.410] ubi2:dml_code is mounted. [2025-09-24 07:13:57.410] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:13:57.410] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:13:57.410] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:13:57.436] data.LB_FadeInType0=100 [2025-09-24 07:13:57.436] data.CHLH_FadeInType0=0 [2025-09-24 07:13:57.436] data.WU_FadeInDelay=0 [2025-09-24 07:13:57.436] max_time_out=0 [2025-09-24 07:13:57.436] No splash screen [2025-09-24 07:13:57.436] stop dss Done [2025-09-24 07:13:57.468] /dev/mem opened. [2025-09-24 07:13:57.468] Memory mapped at address 0xffff9d151000. [2025-09-24 07:13:57.494] Read at address 0x00600018 (0xffff9d151018): 0x00000000 [2025-09-24 07:13:57.494] Write at address 0x00600018 (0xffff9d151018): 0x00400040, readback 0x00400040 [2025-09-24 07:13:57.510] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:13:57.526] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:13:57.622] Loaded PowerVR consumer services. [2025-09-24 07:13:57.734] Waiting data available... [2025-09-24 07:13:57.750] 512+0 records in [2025-09-24 07:13:57.765] 512+0 records out [2025-09-24 07:13:57.781] Starting syslogd/klogd: done [2025-09-24 07:13:57.798] DML Start [2025-09-24 07:13:57.958] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:13:58.166] DML res1: 0 [2025-09-24 07:13:58.668] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:13:58.668] Read Success [2025-09-24 07:13:58.668] Verifying certificate... [2025-09-24 07:13:58.892] Verified OK [2025-09-24 07:13:58.908] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:14:00.444] Verified OK [2025-09-24 07:14:00.444] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:14:01.034] Verified OK [2025-09-24 07:14:01.034] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:14:03.784] fs.protected_hardlinks = 1 [2025-09-24 07:14:03.784] fs.protected_symlinks = 1 [2025-09-24 07:14:03.800] kernel.modules_disabled = 1 [2025-09-24 07:14:04.008] [2025-09-24 07:14:04.008] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:14:05.297] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:14:13.124] SBL1:1210.0.1.0 [2025-09-24 07:14:13.156] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:14:14.738] SBL2:1210.0.1.0 [2025-09-24 07:14:14.770] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:14:14.882] j-A [2025-09-24 07:14:22.221] The R5 Autosar Classic is running [2025-09-24 07:14:22.246] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:14:22.246] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:14:22.854] INIT: version 2.96 booting [2025-09-24 07:14:22.982] INIT: Entering runlevel: 5 [2025-09-24 07:14:23.126] mtd32 attached [2025-09-24 07:14:23.142] mtd28 attached [2025-09-24 07:14:23.142] mtd24 attached [2025-09-24 07:14:23.173] ubi0:dml_code is mounted. [2025-09-24 07:14:23.206] RTNETLINK answers: File exists [2025-09-24 07:14:23.206] ubi1:animations is mounted. [2025-09-24 07:14:23.257] ubi2:textures is mounted. [2025-09-24 07:14:23.257] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:14:23.257] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:14:23.257] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:14:23.257] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:14:23.257] data.LB_FadeInType0=100 [2025-09-24 07:14:23.257] data.CHLH_FadeInType0=0 [2025-09-24 07:14:23.257] data.WU_FadeInDelay=0 [2025-09-24 07:14:23.257] max_time_out=0 [2025-09-24 07:14:23.257] No splash screen [2025-09-24 07:14:23.257] stop dss Done [2025-09-24 07:14:23.257] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:14:23.289] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:14:23.326] /dev/mem opened. [2025-09-24 07:14:23.326] Memory mapped at address 0xffffa46e7000. [2025-09-24 07:14:23.326] Read at address 0x00600018 (0xffffa46e7018): 0x00000000 [2025-09-24 07:14:23.326] Write at address 0x00600018 (0xffffa46e7018): 0x00400040, readback 0x00400040 [2025-09-24 07:14:23.326] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:14:23.470] Loaded PowerVR consumer services. [2025-09-24 07:14:23.595] Waiting data available... [2025-09-24 07:14:23.595] 512+0 records in [2025-09-24 07:14:23.595] 512+0 records out [2025-09-24 07:14:23.627] Starting syslogd/klogd: done [2025-09-24 07:14:23.643] DML Start [2025-09-24 07:14:23.819] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:14:24.059] DML res1: 0 [2025-09-24 07:14:24.490] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:14:24.490] Read Success [2025-09-24 07:14:24.490] Verifying certificate... [2025-09-24 07:14:24.714] Verified OK [2025-09-24 07:14:24.730] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:14:26.344] Verified OK [2025-09-24 07:14:26.344] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:14:26.934] Verified OK [2025-09-24 07:14:26.934] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:14:29.603] fs.protected_hardlinks = 1 [2025-09-24 07:14:29.619] fs.protected_symlinks = 1 [2025-09-24 07:14:29.619] kernel.modules_disabled = 1 [2025-09-24 07:14:29.811] [2025-09-24 07:14:29.811] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:14:31.147] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:14:38.915] SBL1:1210.0.1.0 [2025-09-24 07:14:38.963] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:14:40.530] SBL2:1210.0.1.0 [2025-09-24 07:14:40.562] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:14:40.674] j-A [2025-09-24 07:14:48.048] The R5 Autosar Classic is running [2025-09-24 07:14:48.048] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:14:48.048] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:14:48.656] INIT: version 2.96 booting [2025-09-24 07:14:48.767] INIT: Entering runlevel: 5 [2025-09-24 07:14:48.911] mtd24 attached [2025-09-24 07:14:48.927] mtd28 attached [2025-09-24 07:14:48.943] mtd32 attached [2025-09-24 07:14:48.976] ubi0:textures is mounted. [2025-09-24 07:14:48.992] RTNETLINK answers: File exists [2025-09-24 07:14:49.024] ubi1:animations is mounted. [2025-09-24 07:14:49.024] ubi2:dml_code is mounted. [2025-09-24 07:14:49.024] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:14:49.024] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:14:49.024] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:14:49.056] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:14:49.056] data.LB_FadeInType0=100 [2025-09-24 07:14:49.056] data.CHLH_FadeInType0=0 [2025-09-24 07:14:49.056] data.WU_FadeInDelay=0 [2025-09-24 07:14:49.056] max_time_out=0 [2025-09-24 07:14:49.056] No splash screen [2025-09-24 07:14:49.056] stop dss Done [2025-09-24 07:14:49.056] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:14:49.125] /dev/mem opened. [2025-09-24 07:14:49.125] Memory mapped at address 0xffffb4d3d000. [2025-09-24 07:14:49.125] Read at address 0x00600018 (0xffffb4d3d018): 0x00000000 [2025-09-24 07:14:49.125] Write at address 0x00600018 (0xffffb4d3d018): 0x00400040, readback 0x00400040 [2025-09-24 07:14:49.125] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:14:49.125] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:14:49.221] Loaded PowerVR consumer services. [2025-09-24 07:14:49.380] Waiting data available... [2025-09-24 07:14:49.380] 512+0 records in [2025-09-24 07:14:49.380] 512+0 records out [2025-09-24 07:14:49.412] Starting syslogd/klogd: done [2025-09-24 07:14:49.428] DML Start [2025-09-24 07:14:49.620] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:14:49.844] DML res1: 0 [2025-09-24 07:14:50.260] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:14:50.281] Read Success [2025-09-24 07:14:50.281] Verifying certificate... [2025-09-24 07:14:50.553] Verified OK [2025-09-24 07:14:50.568] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:14:52.437] Verified OK [2025-09-24 07:14:52.437] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:14:52.965] Verified OK [2025-09-24 07:14:52.965] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:14:55.444] fs.protected_hardlinks = 1 [2025-09-24 07:14:55.459] fs.protected_symlinks = 1 [2025-09-24 07:14:55.459] kernel.modules_disabled = 1 [2025-09-24 07:14:55.667] [2025-09-24 07:14:55.667] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:14:56.912] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:15:04.691] SBL1:1210.0.1.0 [2025-09-24 07:15:04.723] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:15:06.305] SBL2:1210.0.1.0 [2025-09-24 07:15:06.337] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:15:06.449] j-A [2025-09-24 07:15:13.789] The R5 Autosar Classic is running [2025-09-24 07:15:13.814] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:15:13.814] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:15:14.421] INIT: version 2.96 booting [2025-09-24 07:15:14.532] INIT: Entering runlevel: 5 [2025-09-24 07:15:14.693] mtd24 attached [2025-09-24 07:15:14.693] mtd28 attached [2025-09-24 07:15:14.709] mtd32 attached [2025-09-24 07:15:14.757] ubi0:textures is mounted. [2025-09-24 07:15:14.757] ubi1:animations is mounted. [2025-09-24 07:15:14.772] ubi2:dml_code is mounted. [2025-09-24 07:15:14.772] RTNETLINK answers: File exists [2025-09-24 07:15:14.808] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:15:14.808] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:15:14.808] data.LB_FadeInType0=100 [2025-09-24 07:15:14.808] data.CHLH_FadeInType0=0 [2025-09-24 07:15:14.808] data.WU_FadeInDelay=0 [2025-09-24 07:15:14.808] max_time_out=0 [2025-09-24 07:15:14.808] No splash screen [2025-09-24 07:15:14.808] stop dss Done [2025-09-24 07:15:14.808] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:15:14.825] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:15:14.841] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:15:14.883] /dev/mem opened. [2025-09-24 07:15:14.883] Memory mapped at address 0xffffad18d000. [2025-09-24 07:15:14.883] Read at address 0x00600018 (0xffffad18d018): 0x00000000 [2025-09-24 07:15:14.883] Write at address 0x00600018 (0xffffad18d018): 0x00400040, readback 0x00400040 [2025-09-24 07:15:14.947] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:15:14.963] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:15:15.107] Loaded PowerVR consumer services. [2025-09-24 07:15:15.155] 512+0 records in [2025-09-24 07:15:15.155] 512+0 records out [2025-09-24 07:15:15.187] Waiting data available... [2025-09-24 07:15:15.203] Starting syslogd/klogd: done [2025-09-24 07:15:15.218] DML Start [2025-09-24 07:15:15.394] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:15:15.603] DML res1: 0 [2025-09-24 07:15:16.062] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:15:16.062] Read Success [2025-09-24 07:15:16.062] Verifying certificate... [2025-09-24 07:15:16.318] Verified OK [2025-09-24 07:15:16.333] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:15:18.077] Verified OK [2025-09-24 07:15:18.097] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:15:18.673] Verified OK [2025-09-24 07:15:18.673] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:15:21.264] fs.protected_hardlinks = 1 [2025-09-24 07:15:21.279] fs.protected_symlinks = 1 [2025-09-24 07:15:21.279] kernel.modules_disabled = 1 [2025-09-24 07:15:21.472] [2025-09-24 07:15:21.472] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:15:22.681] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:15:30.479] SBL1:1210.0.1.0 [2025-09-24 07:15:30.511] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:15:32.093] SBL2:1210.0.1.0 [2025-09-24 07:15:32.125] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:15:32.238] j-A [2025-09-24 07:15:39.609] The R5 Autosar Classic is running [2025-09-24 07:15:39.609] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:15:39.609] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:15:40.216] INIT: version 2.96 booting [2025-09-24 07:15:40.328] INIT: Entering runlevel: 5 [2025-09-24 07:15:40.488] mtd32 attached [2025-09-24 07:15:40.504] mtd28 attached [2025-09-24 07:15:40.504] mtd24 attached [2025-09-24 07:15:40.552] RTNETLINK answers: File exists [2025-09-24 07:15:40.623] ubi0:dml_code is mounted. [2025-09-24 07:15:40.623] ubi2:textures is mounted. [2025-09-24 07:15:40.623] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:15:40.623] ubi1:animations is mounted. [2025-09-24 07:15:40.623] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:15:40.623] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:15:40.623] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:15:40.623] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:15:40.623] data.LB_FadeInType0=100 [2025-09-24 07:15:40.623] data.CHLH_FadeInType0=0 [2025-09-24 07:15:40.623] data.WU_FadeInDelay=0 [2025-09-24 07:15:40.623] max_time_out=0 [2025-09-24 07:15:40.623] No splash screen [2025-09-24 07:15:40.623] stop dss Done [2025-09-24 07:15:40.638] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:15:40.655] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:15:40.670] /dev/mem opened. [2025-09-24 07:15:40.670] Memory mapped at address 0xffffb1938000. [2025-09-24 07:15:40.697] Read at address 0x00600018 (0xffffb1938018): 0x00000000 [2025-09-24 07:15:40.697] Write at address 0x00600018 (0xffffb1938018): 0x00400040, readback 0x00400040 [2025-09-24 07:15:40.888] Loaded PowerVR consumer services. [2025-09-24 07:15:40.937] Waiting data available... [2025-09-24 07:15:40.953] 512+0 records in [2025-09-24 07:15:40.953] 512+0 records out [2025-09-24 07:15:40.969] Starting syslogd/klogd: done [2025-09-24 07:15:41.001] DML Start [2025-09-24 07:15:41.176] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:15:41.384] DML res1: 0 [2025-09-24 07:15:41.859] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:15:41.859] Read Success [2025-09-24 07:15:41.859] Verifying certificate... [2025-09-24 07:15:42.163] Verified OK [2025-09-24 07:15:42.179] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:15:43.677] Verified OK [2025-09-24 07:15:43.677] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:15:44.309] Verified OK [2025-09-24 07:15:44.309] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:15:46.979] fs.protected_hardlinks = 1 [2025-09-24 07:15:46.995] fs.protected_symlinks = 1 [2025-09-24 07:15:46.995] kernel.modules_disabled = 1 [2025-09-24 07:15:47.170] [2025-09-24 07:15:47.170] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:15:48.434] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:15:56.256] SBL1:1210.0.1.0 [2025-09-24 07:15:56.304] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:15:57.871] SBL2:1210.0.1.0 [2025-09-24 07:15:57.903] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:15:58.015] j-A [2025-09-24 07:16:05.369] The R5 Autosar Classic is running [2025-09-24 07:16:05.369] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:16:05.390] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:16:05.997] INIT: version 2.96 booting [2025-09-24 07:16:06.110] INIT: Entering runlevel: 5 [2025-09-24 07:16:06.269] mtd24 attached [2025-09-24 07:16:06.269] mtd28 attached [2025-09-24 07:16:06.285] mtd32 attached [2025-09-24 07:16:06.317] ubi0:textures is mounted. [2025-09-24 07:16:06.333] RTNETLINK answers: File exists [2025-09-24 07:16:06.374] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:16:06.374] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:16:06.374] ubi2:dml_code is mounted. [2025-09-24 07:16:06.374] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:16:06.374] ubi1:animations is mounted. [2025-09-24 07:16:06.374] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:16:06.374] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:16:06.398] data.LB_FadeInType0=100 [2025-09-24 07:16:06.398] data.CHLH_FadeInType0=0 [2025-09-24 07:16:06.398] data.WU_FadeInDelay=0 [2025-09-24 07:16:06.398] max_time_out=0 [2025-09-24 07:16:06.398] No splash screen [2025-09-24 07:16:06.398] stop dss Done [2025-09-24 07:16:06.476] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:16:06.476] /dev/mem opened. [2025-09-24 07:16:06.476] Memory mapped at address 0xffffb395c000. [2025-09-24 07:16:06.476] Read at address 0x00600018 (0xffffb395c018): 0x00000000 [2025-09-24 07:16:06.476] Write at address 0x00600018 (0xffffb395c018): 0x00400040, readback 0x00400040 [2025-09-24 07:16:06.476] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:16:06.669] Loaded PowerVR consumer services. [2025-09-24 07:16:06.701] 512+0 records in [2025-09-24 07:16:06.701] 512+0 records out [2025-09-24 07:16:06.732] Waiting data available... [2025-09-24 07:16:06.748] Starting syslogd/klogd: done [2025-09-24 07:16:06.780] DML Start [2025-09-24 07:16:06.924] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:16:07.132] DML res1: 0 [2025-09-24 07:16:07.603] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:16:07.603] Read Success [2025-09-24 07:16:07.603] Verifying certificate... [2025-09-24 07:16:07.874] Verified OK [2025-09-24 07:16:07.890] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:16:09.644] Verified OK [2025-09-24 07:16:09.644] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:16:10.209] Verified OK [2025-09-24 07:16:10.209] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:16:12.671] fs.protected_hardlinks = 1 [2025-09-24 07:16:12.687] fs.protected_symlinks = 1 [2025-09-24 07:16:12.687] kernel.modules_disabled = 1 [2025-09-24 07:16:12.879] [2025-09-24 07:16:12.879] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:16:14.260] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:16:22.029] SBL1:1210.0.1.0 [2025-09-24 07:16:22.076] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:16:23.643] SBL2:1210.0.1.0 [2025-09-24 07:16:23.692] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:16:23.788] j-A [2025-09-24 07:16:31.141] The R5 Autosar Classic is running [2025-09-24 07:16:31.141] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:16:31.162] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:16:31.770] INIT: version 2.96 booting [2025-09-24 07:16:31.882] INIT: Entering runlevel: 5 [2025-09-24 07:16:32.041] mtd24 attached [2025-09-24 07:16:32.041] mtd28 attached [2025-09-24 07:16:32.057] mtd32 attached [2025-09-24 07:16:32.073] ubi0:textures is mounted. [2025-09-24 07:16:32.106] RTNETLINK answers: File exists [2025-09-24 07:16:32.131] ubi2:dml_code is mounted. [2025-09-24 07:16:32.131] ubi1:animations is mounted. [2025-09-24 07:16:32.131] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:16:32.171] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:16:32.171] data.LB_FadeInType0=100 [2025-09-24 07:16:32.171] data.CHLH_FadeInType0=0 [2025-09-24 07:16:32.171] data.WU_FadeInDelay=0 [2025-09-24 07:16:32.171] max_time_out=0 [2025-09-24 07:16:32.171] No splash screen [2025-09-24 07:16:32.171] stop dss Done [2025-09-24 07:16:32.171] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:16:32.171] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:16:32.171] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:16:32.239] /dev/mem opened. [2025-09-24 07:16:32.239] Memory mapped at address 0xffffbd4b9000. [2025-09-24 07:16:32.239] Read at address 0x00600018 (0xffffbd4b9018): 0x00000000 [2025-09-24 07:16:32.239] Write at address 0x00600018 (0xffffbd4b9018): 0x00400040, readback 0x00400040 [2025-09-24 07:16:32.239] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:16:32.261] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:16:32.437] Loaded PowerVR consumer services. [2025-09-24 07:16:32.500] 512+0 records in [2025-09-24 07:16:32.500] 512+0 records out [2025-09-24 07:16:32.516] Waiting data available... [2025-09-24 07:16:32.516] Starting syslogd/klogd: done [2025-09-24 07:16:32.548] DML Start [2025-09-24 07:16:32.756] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:16:32.980] DML res1: 0 [2025-09-24 07:16:33.369] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:16:33.369] Read Success [2025-09-24 07:16:33.369] Verifying certificate... [2025-09-24 07:16:33.626] Verified OK [2025-09-24 07:16:33.626] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:16:35.049] Verified OK [2025-09-24 07:16:35.049] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:16:35.784] Verified OK [2025-09-24 07:16:35.784] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:16:38.613] fs.protected_hardlinks = 1 [2025-09-24 07:16:38.613] fs.protected_symlinks = 1 [2025-09-24 07:16:38.630] kernel.modules_disabled = 1 [2025-09-24 07:16:38.821] [2025-09-24 07:16:38.821] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:16:40.053] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:16:47.819] SBL1:1210.0.1.0 [2025-09-24 07:16:47.866] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:16:49.434] SBL2:1210.0.1.0 [2025-09-24 07:16:49.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:16:49.577] j-A [2025-09-24 07:16:56.931] The R5 Autosar Classic is running [2025-09-24 07:16:56.931] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:16:56.952] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:16:57.560] INIT: version 2.96 booting [2025-09-24 07:16:57.671] INIT: Entering runlevel: 5 [2025-09-24 07:16:57.832] mtd24 attached [2025-09-24 07:16:57.832] mtd28 attached [2025-09-24 07:16:57.863] mtd32 attached [2025-09-24 07:16:57.895] ubi1:animations is mounted. [2025-09-24 07:16:57.895] ubi0:textures is mounted. [2025-09-24 07:16:57.970] RTNETLINK answers: File exists [2025-09-24 07:16:57.970] ubi2:dml_code is mounted. [2025-09-24 07:16:57.970] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:16:57.970] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:16:57.970] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:16:57.970] data.LB_FadeInType0=100 [2025-09-24 07:16:57.970] data.CHLH_FadeInType0=0 [2025-09-24 07:16:57.970] data.WU_FadeInDelay=0 [2025-09-24 07:16:57.970] max_time_out=0 [2025-09-24 07:16:57.970] No splash screen [2025-09-24 07:16:57.970] stop dss Done [2025-09-24 07:16:57.970] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:16:57.970] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:16:58.026] /dev/mem opened. [2025-09-24 07:16:58.026] Memory mapped at address 0xffffa4494000. [2025-09-24 07:16:58.026] Read at address 0x00600018 (0xffffa4494018): 0x00000000 [2025-09-24 07:16:58.026] Write at address 0x00600018 (0xffffa4494018): 0x00400040, readback 0x00400040 [2025-09-24 07:16:58.057] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:16:58.080] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:16:58.224] Loaded PowerVR consumer services. [2025-09-24 07:16:58.273] 512+0 records in [2025-09-24 07:16:58.273] 512+0 records out [2025-09-24 07:16:58.321] Waiting data available... [2025-09-24 07:16:58.321] Starting syslogd/klogd: done [2025-09-24 07:16:58.336] DML Start [2025-09-24 07:16:58.528] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:16:58.752] DML res1: 0 [2025-09-24 07:16:59.142] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:16:59.142] Read Success [2025-09-24 07:16:59.142] Verifying certificate... [2025-09-24 07:16:59.366] Verified OK [2025-09-24 07:16:59.382] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:17:00.955] Verified OK [2025-09-24 07:17:00.955] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:17:01.520] Verified OK [2025-09-24 07:17:01.520] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:17:04.334] fs.protected_hardlinks = 1 [2025-09-24 07:17:04.334] fs.protected_symlinks = 1 [2025-09-24 07:17:04.350] kernel.modules_disabled = 1 [2025-09-24 07:17:04.542] [2025-09-24 07:17:04.542] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:17:05.814] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:17:13.575] SBL1:1210.0.1.0 [2025-09-24 07:17:13.607] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:17:15.190] SBL2:1210.0.1.0 [2025-09-24 07:17:15.221] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:17:15.334] j-A [2025-09-24 07:17:22.705] The R5 Autosar Classic is running [2025-09-24 07:17:22.705] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:17:22.705] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:17:23.312] INIT: version 2.96 booting [2025-09-24 07:17:23.424] INIT: Entering runlevel: 5 [2025-09-24 07:17:23.568] mtd28 attached [2025-09-24 07:17:23.583] mtd24 attached [2025-09-24 07:17:23.599] mtd32 attached [2025-09-24 07:17:23.631] ubi0:animations is mounted. [2025-09-24 07:17:23.647] RTNETLINK answers: File exists [2025-09-24 07:17:23.695] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:17:23.695] ubi1:textures is mounted. [2025-09-24 07:17:23.695] ubi2:dml_code is mounted. [2025-09-24 07:17:23.695] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:17:23.695] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:17:23.695] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:17:23.695] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:17:23.695] data.LB_FadeInType0=100 [2025-09-24 07:17:23.695] data.CHLH_FadeInType0=0 [2025-09-24 07:17:23.695] data.WU_FadeInDelay=0 [2025-09-24 07:17:23.695] max_time_out=0 [2025-09-24 07:17:23.695] No splash screen [2025-09-24 07:17:23.695] stop dss Done [2025-09-24 07:17:23.780] /dev/mem opened. [2025-09-24 07:17:23.780] Memory mapped at address 0xffff9b73e000. [2025-09-24 07:17:23.780] Read at address 0x00600018 (0xffff9b73e018): 0x00000000 [2025-09-24 07:17:23.780] Write at address 0x00600018 (0xffff9b73e018): 0x00400040, readback 0x00400040 [2025-09-24 07:17:23.780] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:17:23.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:17:23.971] Loaded PowerVR consumer services. [2025-09-24 07:17:24.019] Waiting data available... [2025-09-24 07:17:24.035] 512+0 records in [2025-09-24 07:17:24.035] 512+0 records out [2025-09-24 07:17:24.067] Starting syslogd/klogd: done [2025-09-24 07:17:24.083] DML Start [2025-09-24 07:17:24.259] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:17:24.483] DML res1: 0 [2025-09-24 07:17:24.941] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:17:24.941] Read Success [2025-09-24 07:17:24.941] Verifying certificate... [2025-09-24 07:17:25.181] Verified OK [2025-09-24 07:17:25.197] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:17:26.870] Verified OK [2025-09-24 07:17:26.870] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:17:27.517] Verified OK [2025-09-24 07:17:27.517] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:17:30.028] fs.protected_hardlinks = 1 [2025-09-24 07:17:30.044] fs.protected_symlinks = 1 [2025-09-24 07:17:30.044] kernel.modules_disabled = 1 [2025-09-24 07:17:30.236] [2025-09-24 07:17:30.236] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:17:31.577] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:17:39.332] SBL1:1210.0.1.0 [2025-09-24 07:17:39.364] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:17:40.931] SBL2:1210.0.1.0 [2025-09-24 07:17:40.979] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:17:41.076] j-A [2025-09-24 07:17:48.430] The R5 Autosar Classic is running [2025-09-24 07:17:48.455] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:17:48.455] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:17:49.063] INIT: version 2.96 booting [2025-09-24 07:17:49.175] INIT: Entering runlevel: 5 [2025-09-24 07:17:49.334] mtd32 attached [2025-09-24 07:17:49.334] mtd24 attached [2025-09-24 07:17:49.366] mtd28 attached [2025-09-24 07:17:49.398] ubi0:dml_code is mounted. [2025-09-24 07:17:49.398] RTNETLINK answers: File exists [2025-09-24 07:17:49.459] ubi1:textures is mounted. [2025-09-24 07:17:49.459] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:17:49.459] ubi2:animations is mounted. [2025-09-24 07:17:49.459] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:17:49.459] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:17:49.459] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:17:49.459] data.LB_FadeInType0=100 [2025-09-24 07:17:49.459] data.CHLH_FadeInType0=0 [2025-09-24 07:17:49.459] data.WU_FadeInDelay=0 [2025-09-24 07:17:49.459] max_time_out=0 [2025-09-24 07:17:49.459] No splash screen [2025-09-24 07:17:49.459] stop dss Done [2025-09-24 07:17:49.459] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:17:49.546] /dev/mem opened. [2025-09-24 07:17:49.546] Memory mapped at address 0xffffb72b8000. [2025-09-24 07:17:49.546] Read at address 0x00600018 (0xffffb72b8018): 0x00000000 [2025-09-24 07:17:49.546] Write at address 0x00600018 (0xffffb72b8018): 0x00400040, readback 0x00400040 [2025-09-24 07:17:49.546] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:17:49.546] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:17:49.738] Loaded PowerVR consumer services. [2025-09-24 07:17:49.787] 512+0 records in [2025-09-24 07:17:49.787] 512+0 records out [2025-09-24 07:17:49.787] Waiting data available... [2025-09-24 07:17:49.834] Starting syslogd/klogd: done [2025-09-24 07:17:49.850] DML Start [2025-09-24 07:17:50.010] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:17:50.250] DML res1: 0 [2025-09-24 07:17:50.705] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:17:50.705] Read Success [2025-09-24 07:17:50.705] Verifying certificate... [2025-09-24 07:17:50.928] Verified OK [2025-09-24 07:17:50.944] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:17:52.623] Verified OK [2025-09-24 07:17:52.623] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:17:53.161] Verified OK [2025-09-24 07:17:53.161] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:17:55.751] fs.protected_hardlinks = 1 [2025-09-24 07:17:55.751] fs.protected_symlinks = 1 [2025-09-24 07:17:55.768] kernel.modules_disabled = 1 [2025-09-24 07:17:55.975] [2025-09-24 07:17:55.975] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:17:57.358] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:18:05.110] SBL1:1210.0.1.0 [2025-09-24 07:18:05.158] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:18:06.724] SBL2:1210.0.1.0 [2025-09-24 07:18:06.772] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:18:06.868] j-A [2025-09-24 07:18:14.224] The R5 Autosar Classic is running [2025-09-24 07:18:14.248] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:18:14.248] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:18:14.855] INIT: version 2.96 booting [2025-09-24 07:18:14.967] INIT: Entering runlevel: 5 [2025-09-24 07:18:15.127] mtd28 attached [2025-09-24 07:18:15.127] mtd32 attached [2025-09-24 07:18:15.143] mtd24 attached [2025-09-24 07:18:15.190] ubi0:animations is mounted. [2025-09-24 07:18:15.190] RTNETLINK answers: File exists [2025-09-24 07:18:15.251] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:18:15.251] ubi1:dml_code is mounted. [2025-09-24 07:18:15.251] ubi2:textures is mounted. [2025-09-24 07:18:15.251] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:18:15.251] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:18:15.251] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:18:15.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:18:15.251] data.LB_FadeInType0=100 [2025-09-24 07:18:15.251] data.CHLH_FadeInType0=0 [2025-09-24 07:18:15.251] data.WU_FadeInDelay=0 [2025-09-24 07:18:15.251] max_time_out=0 [2025-09-24 07:18:15.251] No splash screen [2025-09-24 07:18:15.251] stop dss Done [2025-09-24 07:18:15.316] /dev/mem opened. [2025-09-24 07:18:15.316] Memory mapped at address 0xffff98c2d000. [2025-09-24 07:18:15.356] Read at address 0x00600018 (0xffff98c2d018): 0x00000000 [2025-09-24 07:18:15.356] Write at address 0x00600018 (0xffff98c2d018): 0x00400040, readback 0x00400040 [2025-09-24 07:18:15.356] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:18:15.356] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:18:15.484] Loaded PowerVR consumer services. [2025-09-24 07:18:15.549] 512+0 records in [2025-09-24 07:18:15.549] 512+0 records out [2025-09-24 07:18:15.596] Starting syslogd/klogd: done [2025-09-24 07:18:15.644] Waiting data available... [2025-09-24 07:18:15.644] DML Start [2025-09-24 07:18:15.852] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:18:16.076] DML res1: 0 [2025-09-24 07:18:16.440] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:18:16.440] Read Success [2025-09-24 07:18:16.440] Verifying certificate... [2025-09-24 07:18:16.712] Verified OK [2025-09-24 07:18:16.728] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:18:18.272] Verified OK [2025-09-24 07:18:18.272] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:18:18.934] Verified OK [2025-09-24 07:18:18.934] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:18:21.684] fs.protected_hardlinks = 1 [2025-09-24 07:18:21.700] fs.protected_symlinks = 1 [2025-09-24 07:18:21.700] kernel.modules_disabled = 1 [2025-09-24 07:18:21.908] [2025-09-24 07:18:21.908] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:18:23.123] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:18:30.899] SBL1:1210.0.1.0 [2025-09-24 07:18:30.947] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:18:32.513] SBL2:1210.0.1.0 [2025-09-24 07:18:32.545] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:18:32.657] j-A [2025-09-24 07:18:40.033] The R5 Autosar Classic is running [2025-09-24 07:18:40.033] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:18:40.033] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:18:40.640] INIT: version 2.96 booting [2025-09-24 07:18:40.753] INIT: Entering runlevel: 5 [2025-09-24 07:18:40.896] mtd24 attached [2025-09-24 07:18:40.912] mtd28 attached [2025-09-24 07:18:40.928] mtd32 attached [2025-09-24 07:18:40.961] ubi0:textures is mounted. [2025-09-24 07:18:40.976] RTNETLINK answers: File exists [2025-09-24 07:18:40.976] ubi1:animations is mounted. [2025-09-24 07:18:41.031] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:18:41.031] ubi2:dml_code is mounted. [2025-09-24 07:18:41.031] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:18:41.031] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:18:41.031] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:18:41.031] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:18:41.031] data.LB_FadeInType0=100 [2025-09-24 07:18:41.031] data.CHLH_FadeInType0=0 [2025-09-24 07:18:41.031] data.WU_FadeInDelay=0 [2025-09-24 07:18:41.031] max_time_out=0 [2025-09-24 07:18:41.031] No splash screen [2025-09-24 07:18:41.031] stop dss Done [2025-09-24 07:18:41.125] /dev/mem opened. [2025-09-24 07:18:41.125] Memory mapped at address 0xffff87cd4000. [2025-09-24 07:18:41.125] Read at address 0x00600018 (0xffff87cd4018): 0x00000000 [2025-09-24 07:18:41.125] Write at address 0x00600018 (0xffff87cd4018): 0x00400040, readback 0x00400040 [2025-09-24 07:18:41.125] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:18:41.125] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:18:41.221] Loaded PowerVR consumer services. [2025-09-24 07:18:41.380] Waiting data available... [2025-09-24 07:18:41.380] 512+0 records in [2025-09-24 07:18:41.380] 512+0 records out [2025-09-24 07:18:41.412] Starting syslogd/klogd: done [2025-09-24 07:18:41.428] DML Start [2025-09-24 07:18:41.604] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:18:41.844] DML res1: 0 [2025-09-24 07:18:42.266] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:18:42.266] Read Success [2025-09-24 07:18:42.266] Verifying certificate... [2025-09-24 07:18:42.490] Verified OK [2025-09-24 07:18:42.506] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:18:44.073] Verified OK [2025-09-24 07:18:44.073] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:18:44.664] Verified OK [2025-09-24 07:18:44.686] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:18:47.419] fs.protected_hardlinks = 1 [2025-09-24 07:18:47.435] fs.protected_symlinks = 1 [2025-09-24 07:18:47.435] kernel.modules_disabled = 1 [2025-09-24 07:18:47.627] [2025-09-24 07:18:47.627] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:18:48.874] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:18:56.660] SBL1:1210.0.1.0 [2025-09-24 07:18:56.692] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:18:58.274] SBL2:1210.0.1.0 [2025-09-24 07:18:58.306] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:18:58.418] j-A [2025-09-24 07:19:05.793] The R5 Autosar Classic is running [2025-09-24 07:19:05.793] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:19:05.793] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:19:06.400] INIT: version 2.96 booting [2025-09-24 07:19:06.512] INIT: Entering runlevel: 5 [2025-09-24 07:19:06.671] mtd28 attached [2025-09-24 07:19:06.671] mtd32 attached [2025-09-24 07:19:06.687] mtd24 attached [2025-09-24 07:19:06.703] ubi0:animations is mounted. [2025-09-24 07:19:06.735] ubi1:dml_code is mounted. [2025-09-24 07:19:06.735] RTNETLINK answers: File exists [2025-09-24 07:19:06.794] ubi2:textures is mounted. [2025-09-24 07:19:06.794] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:19:06.794] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:19:06.794] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:19:06.794] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:19:06.794] data.LB_FadeInType0=100 [2025-09-24 07:19:06.794] data.CHLH_FadeInType0=0 [2025-09-24 07:19:06.794] data.WU_FadeInDelay=0 [2025-09-24 07:19:06.794] max_time_out=0 [2025-09-24 07:19:06.794] No splash screen [2025-09-24 07:19:06.794] stop dss Done [2025-09-24 07:19:06.794] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:19:06.842] /dev/mem opened. [2025-09-24 07:19:06.842] Memory mapped at address 0xffffa2410000. [2025-09-24 07:19:06.869] Read at address 0x00600018 (0xffffa2410018): 0x00000000 [2025-09-24 07:19:06.869] Write at address 0x00600018 (0xffffa2410018): 0x00400040, readback 0x00400040 [2025-09-24 07:19:06.884] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:19:06.884] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:19:06.996] Loaded PowerVR consumer services. [2025-09-24 07:19:07.124] 512+0 records in [2025-09-24 07:19:07.124] 512+0 records out [2025-09-24 07:19:07.124] Waiting data available... [2025-09-24 07:19:07.156] Starting syslogd/klogd: done [2025-09-24 07:19:07.172] DML Start [2025-09-24 07:19:07.396] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:19:07.636] DML res1: 0 [2025-09-24 07:19:07.940] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:19:07.961] Read Success [2025-09-24 07:19:07.961] Verifying certificate... [2025-09-24 07:19:08.185] Verified OK [2025-09-24 07:19:08.201] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:19:09.800] Verified OK [2025-09-24 07:19:09.800] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:19:10.421] Verified OK [2025-09-24 07:19:10.421] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:19:13.138] fs.protected_hardlinks = 1 [2025-09-24 07:19:13.154] fs.protected_symlinks = 1 [2025-09-24 07:19:13.154] kernel.modules_disabled = 1 [2025-09-24 07:19:13.345] [2025-09-24 07:19:13.345] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:19:14.670] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:19:22.444] SBL1:1210.0.1.0 [2025-09-24 07:19:22.475] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:19:24.058] SBL2:1210.0.1.0 [2025-09-24 07:19:24.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:19:24.202] j-A [2025-09-24 07:19:31.542] The R5 Autosar Classic is running [2025-09-24 07:19:31.573] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:19:31.573] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:19:32.181] INIT: version 2.96 booting [2025-09-24 07:19:32.292] INIT: Entering runlevel: 5 [2025-09-24 07:19:32.436] mtd24 attached [2025-09-24 07:19:32.452] mtd32 attached [2025-09-24 07:19:32.452] mtd28 attached [2025-09-24 07:19:32.569] RTNETLINK answers: File exists [2025-09-24 07:19:32.569] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:19:32.569] ubi1:dml_code is mounted. [2025-09-24 07:19:32.569] ubi0:textures is mounted. [2025-09-24 07:19:32.569] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:19:32.569] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:19:32.569] ubi2:animations is mounted. [2025-09-24 07:19:32.569] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:19:32.569] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:19:32.569] data.LB_FadeInType0=100 [2025-09-24 07:19:32.569] data.CHLH_FadeInType0=0 [2025-09-24 07:19:32.569] data.WU_FadeInDelay=0 [2025-09-24 07:19:32.569] max_time_out=0 [2025-09-24 07:19:32.569] No splash screen [2025-09-24 07:19:32.569] stop dss Done [2025-09-24 07:19:32.617] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:19:32.649] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:19:32.649] /dev/mem opened. [2025-09-24 07:19:32.649] Memory mapped at address 0xffff8058b000. [2025-09-24 07:19:32.649] Read at address 0x00600018 (0xffff8058b018): 0x00000000 [2025-09-24 07:19:32.649] Write at address 0x00600018 (0xffff8058b018): 0x00400040, readback 0x00400040 [2025-09-24 07:19:32.873] Loaded PowerVR consumer services. [2025-09-24 07:19:32.905] Waiting data available... [2025-09-24 07:19:32.905] 512+0 records in [2025-09-24 07:19:32.905] 512+0 records out [2025-09-24 07:19:32.969] Starting syslogd/klogd: done [2025-09-24 07:19:32.985] DML Start [2025-09-24 07:19:33.145] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:19:33.352] DML res1: 0 [2025-09-24 07:19:33.864] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:19:33.886] Read Success [2025-09-24 07:19:33.886] Verifying certificate... [2025-09-24 07:19:34.109] Verified OK [2025-09-24 07:19:34.125] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:19:35.796] Verified OK [2025-09-24 07:19:35.796] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:19:36.418] Verified OK [2025-09-24 07:19:36.418] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:19:39.057] fs.protected_hardlinks = 1 [2025-09-24 07:19:39.073] fs.protected_symlinks = 1 [2025-09-24 07:19:39.073] kernel.modules_disabled = 1 [2025-09-24 07:19:39.280] [2025-09-24 07:19:39.280] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:19:40.415] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:19:48.266] SBL1:1210.0.1.0 [2025-09-24 07:19:48.314] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:19:49.881] SBL2:1210.0.1.0 [2025-09-24 07:19:49.929] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:19:50.025] j-A [2025-09-24 07:19:57.379] The R5 Autosar Classic is running [2025-09-24 07:19:57.405] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:19:57.405] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:19:58.013] INIT: version 2.96 booting [2025-09-24 07:19:58.124] INIT: Entering runlevel: 5 [2025-09-24 07:19:58.269] mtd24 attached [2025-09-24 07:19:58.284] mtd32 attached [2025-09-24 07:19:58.300] mtd28 attached [2025-09-24 07:19:58.332] ubi0:textures is mounted. [2025-09-24 07:19:58.348] RTNETLINK answers: File exists [2025-09-24 07:19:58.348] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:19:58.405] ubi1:dml_code is mounted. [2025-09-24 07:19:58.405] ubi2:animations is mounted. [2025-09-24 07:19:58.405] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:19:58.405] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:19:58.405] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:19:58.405] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:19:58.405] data.LB_FadeInType0=100 [2025-09-24 07:19:58.405] data.CHLH_FadeInType0=0 [2025-09-24 07:19:58.405] data.WU_FadeInDelay=0 [2025-09-24 07:19:58.405] max_time_out=0 [2025-09-24 07:19:58.405] No splash screen [2025-09-24 07:19:58.405] stop dss Done [2025-09-24 07:19:58.452] /dev/mem opened. [2025-09-24 07:19:58.452] Memory mapped at address 0xffff84fc5000. [2025-09-24 07:19:58.478] Read at address 0x00600018 (0xffff84fc5018): 0x00000000 [2025-09-24 07:19:58.478] Write at address 0x00600018 (0xffff84fc5018): 0x00400040, readback 0x00400040 [2025-09-24 07:19:58.494] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:19:58.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:19:58.682] Loaded PowerVR consumer services. [2025-09-24 07:19:58.753] 512+0 records in [2025-09-24 07:19:58.753] 512+0 records out [2025-09-24 07:19:58.753] Waiting data available... [2025-09-24 07:19:58.785] Starting syslogd/klogd: done [2025-09-24 07:19:58.801] DML Start [2025-09-24 07:19:58.993] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:19:59.217] DML res1: 0 [2025-09-24 07:19:59.709] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:19:59.709] Read Success [2025-09-24 07:19:59.709] Verifying certificate... [2025-09-24 07:19:59.965] Verified OK [2025-09-24 07:19:59.997] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:20:01.564] Verified OK [2025-09-24 07:20:01.564] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:20:02.293] Verified OK [2025-09-24 07:20:02.293] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:20:04.915] fs.protected_hardlinks = 1 [2025-09-24 07:20:04.931] fs.protected_symlinks = 1 [2025-09-24 07:20:04.931] kernel.modules_disabled = 1 [2025-09-24 07:20:05.139] [2025-09-24 07:20:05.139] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:20:06.303] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:20:14.039] SBL1:1210.0.1.0 [2025-09-24 07:20:14.087] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:20:15.653] SBL2:1210.0.1.0 [2025-09-24 07:20:15.685] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:20:15.797] j-A [2025-09-24 07:20:23.152] The R5 Autosar Classic is running [2025-09-24 07:20:23.152] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:20:23.173] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:20:23.780] INIT: version 2.96 booting [2025-09-24 07:20:23.893] INIT: Entering runlevel: 5 [2025-09-24 07:20:24.052] mtd32 attached [2025-09-24 07:20:24.068] mtd28 attached [2025-09-24 07:20:24.068] mtd24 attached [2025-09-24 07:20:24.116] RTNETLINK answers: File exists [2025-09-24 07:20:24.163] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:20:24.163] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:20:24.163] ubi1:animations is mounted. [2025-09-24 07:20:24.163] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:20:24.163] ubi0:dml_code is mounted. [2025-09-24 07:20:24.163] ubi2:textures is mounted. [2025-09-24 07:20:24.163] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:20:24.163] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:20:24.189] data.LB_FadeInType0=100 [2025-09-24 07:20:24.189] data.CHLH_FadeInType0=0 [2025-09-24 07:20:24.189] data.WU_FadeInDelay=0 [2025-09-24 07:20:24.189] max_time_out=0 [2025-09-24 07:20:24.189] No splash screen [2025-09-24 07:20:24.189] stop dss Done [2025-09-24 07:20:24.221] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:20:24.267] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:20:24.267] /dev/mem opened. [2025-09-24 07:20:24.267] Memory mapped at address 0xffffb6aa3000. [2025-09-24 07:20:24.267] Read at address 0x00600018 (0xffffb6aa3018): 0x00000000 [2025-09-24 07:20:24.267] Write at address 0x00600018 (0xffffb6aa3018): 0x00400040, readback 0x00400040 [2025-09-24 07:20:24.379] Loaded PowerVR consumer services. [2025-09-24 07:20:24.516] 512+0 records in [2025-09-24 07:20:24.516] 512+0 records out [2025-09-24 07:20:24.516] Waiting data available... [2025-09-24 07:20:24.548] Starting syslogd/klogd: done [2025-09-24 07:20:24.564] DML Start [2025-09-24 07:20:24.756] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:20:25.012] DML res1: 0 [2025-09-24 07:20:25.389] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:20:25.389] Read Success [2025-09-24 07:20:25.389] Verifying certificate... [2025-09-24 07:20:25.613] Verified OK [2025-09-24 07:20:25.629] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:20:27.336] Verified OK [2025-09-24 07:20:27.336] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:20:27.936] Verified OK [2025-09-24 07:20:27.936] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:20:30.604] fs.protected_hardlinks = 1 [2025-09-24 07:20:30.604] fs.protected_symlinks = 1 [2025-09-24 07:20:30.604] kernel.modules_disabled = 1 [2025-09-24 07:20:30.796] [2025-09-24 07:20:30.796] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:20:32.078] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:20:39.813] SBL1:1210.0.1.0 [2025-09-24 07:20:39.860] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:20:41.427] SBL2:1210.0.1.0 [2025-09-24 07:20:41.476] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:20:41.571] j-A [2025-09-24 07:20:48.926] The R5 Autosar Classic is running [2025-09-24 07:20:48.948] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:20:48.948] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:20:49.555] INIT: version 2.96 booting [2025-09-24 07:20:49.668] INIT: Entering runlevel: 5 [2025-09-24 07:20:49.811] mtd24 attached [2025-09-24 07:20:49.827] mtd28 attached [2025-09-24 07:20:49.889] mtd32 attached [2025-09-24 07:20:49.889] ubi0:textures is mounted. [2025-09-24 07:20:49.889] ubi1:animations is mounted. [2025-09-24 07:20:49.889] RTNETLINK answers: File exists [2025-09-24 07:20:49.934] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:20:49.934] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:20:49.934] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:20:49.934] ubi2:dml_code is mounted. [2025-09-24 07:20:49.934] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:20:49.934] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:20:49.955] data.LB_FadeInType0=100 [2025-09-24 07:20:49.955] data.CHLH_FadeInType0=0 [2025-09-24 07:20:49.955] data.WU_FadeInDelay=0 [2025-09-24 07:20:49.955] max_time_out=0 [2025-09-24 07:20:49.955] No splash screen [2025-09-24 07:20:49.955] stop dss Done [2025-09-24 07:20:49.970] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:20:49.987] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:20:50.037] /dev/mem opened. [2025-09-24 07:20:50.037] Memory mapped at address 0xffff8ab68000. [2025-09-24 07:20:50.037] Read at address 0x00600018 (0xffff8ab68018): 0x00000000 [2025-09-24 07:20:50.037] Write at address 0x00600018 (0xffff8ab68018): 0x00400040, readback 0x00400040 [2025-09-24 07:20:50.101] Loaded PowerVR consumer services. [2025-09-24 07:20:50.261] Waiting data available... [2025-09-24 07:20:50.277] 512+0 records in [2025-09-24 07:20:50.277] 512+0 records out [2025-09-24 07:20:50.325] Starting syslogd/klogd: done [2025-09-24 07:20:50.341] DML Start [2025-09-24 07:20:50.501] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:20:50.773] DML res1: 0 [2025-09-24 07:20:51.200] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:20:51.200] Read Success [2025-09-24 07:20:51.200] Verifying certificate... [2025-09-24 07:20:51.488] Verified OK [2025-09-24 07:20:51.504] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:20:53.150] Verified OK [2025-09-24 07:20:53.171] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:20:53.838] Verified OK [2025-09-24 07:20:53.838] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:20:56.396] fs.protected_hardlinks = 1 [2025-09-24 07:20:56.412] fs.protected_symlinks = 1 [2025-09-24 07:20:56.412] kernel.modules_disabled = 1 [2025-09-24 07:20:56.605] [2025-09-24 07:20:56.605] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:20:57.829] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:21:05.588] SBL1:1210.0.1.0 [2025-09-24 07:21:05.620] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:21:07.202] SBL2:1210.0.1.0 [2025-09-24 07:21:07.235] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:21:07.347] j-A [2025-09-24 07:21:14.685] The R5 Autosar Classic is running [2025-09-24 07:21:14.710] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:21:14.710] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:21:15.317] INIT: version 2.96 booting [2025-09-24 07:21:15.429] INIT: Entering runlevel: 5 [2025-09-24 07:21:15.589] mtd24 attached [2025-09-24 07:21:15.605] mtd28 attached [2025-09-24 07:21:15.605] mtd32 attached [2025-09-24 07:21:15.669] RTNETLINK answers: File exists [2025-09-24 07:21:15.669] ubi0:textures is mounted. [2025-09-24 07:21:15.729] ubi1:animations is mounted. [2025-09-24 07:21:15.729] ubi2:dml_code is mounted. [2025-09-24 07:21:15.729] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:21:15.729] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:21:15.729] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:21:15.729] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:21:15.729] data.LB_FadeInType0=100 [2025-09-24 07:21:15.729] data.CHLH_FadeInType0=0 [2025-09-24 07:21:15.729] data.WU_FadeInDelay=0 [2025-09-24 07:21:15.729] max_time_out=0 [2025-09-24 07:21:15.729] No splash screen [2025-09-24 07:21:15.729] stop dss Done [2025-09-24 07:21:15.729] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:21:15.798] /dev/mem opened. [2025-09-24 07:21:15.798] Memory mapped at address 0xffff9c59f000. [2025-09-24 07:21:15.798] Read at address 0x00600018 (0xffff9c59f018): 0x00000000 [2025-09-24 07:21:15.798] Write at address 0x00600018 (0xffff9c59f018): 0x00400040, readback 0x00400040 [2025-09-24 07:21:15.830] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:21:15.846] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:21:16.006] Loaded PowerVR consumer services. [2025-09-24 07:21:16.066] Waiting data available... [2025-09-24 07:21:16.066] 512+0 records in [2025-09-24 07:21:16.066] 512+0 records out [2025-09-24 07:21:16.082] Starting syslogd/klogd: done [2025-09-24 07:21:16.099] DML Start [2025-09-24 07:21:16.259] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:21:16.483] DML res1: 0 [2025-09-24 07:21:16.985] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:21:16.985] Read Success [2025-09-24 07:21:16.985] Verifying certificate... [2025-09-24 07:21:17.209] Verified OK [2025-09-24 07:21:17.241] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:21:18.969] Verified OK [2025-09-24 07:21:18.969] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:21:19.608] Verified OK [2025-09-24 07:21:19.629] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:21:22.235] fs.protected_hardlinks = 1 [2025-09-24 07:21:22.251] fs.protected_symlinks = 1 [2025-09-24 07:21:22.251] kernel.modules_disabled = 1 [2025-09-24 07:21:22.459] [2025-09-24 07:21:22.459] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:21:23.593] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:21:31.343] SBL1:1210.0.1.0 [2025-09-24 07:21:31.375] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:21:32.958] SBL2:1210.0.1.0 [2025-09-24 07:21:32.990] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 07:21:33.101] j-A [2025-09-24 07:21:40.440] The R5 Autosar Classic is running [2025-09-24 07:21:40.471] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:21:40.471] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:21:41.078] INIT: version 2.96 booting [2025-09-24 07:21:41.190] INIT: Entering runlevel: 5 [2025-09-24 07:21:41.334] mtd24 attached [2025-09-24 07:21:41.350] mtd28 attached [2025-09-24 07:21:41.366] mtd32 attached [2025-09-24 07:21:41.414] RTNETLINK answers: File exists [2025-09-24 07:21:41.414] ubi0:textures is mounted. [2025-09-24 07:21:41.471] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:21:41.471] ubi1:animations is mounted. [2025-09-24 07:21:41.471] ubi2:dml_code is mounted. [2025-09-24 07:21:41.471] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:21:41.471] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:21:41.471] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:21:41.471] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:21:41.471] data.LB_FadeInType0=100 [2025-09-24 07:21:41.471] data.CHLH_FadeInType0=0 [2025-09-24 07:21:41.471] data.WU_FadeInDelay=0 [2025-09-24 07:21:41.471] max_time_out=0 [2025-09-24 07:21:41.471] No splash screen [2025-09-24 07:21:41.471] stop dss Done [2025-09-24 07:21:41.503] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:21:41.549] /dev/mem opened. [2025-09-24 07:21:41.549] Memory mapped at address 0xffff80bbd000. [2025-09-24 07:21:41.549] Read at address 0x00600018 (0xffff80bbd018): 0x00000000 [2025-09-24 07:21:41.549] Write at address 0x00600018 (0xffff80bbd018): 0x00400040, readback 0x00400040 [2025-09-24 07:21:41.549] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:21:41.789] Loaded PowerVR consumer services. [2025-09-24 07:21:41.821] Waiting data available... [2025-09-24 07:21:41.837] 512+0 records in [2025-09-24 07:21:41.837] 512+0 records out [2025-09-24 07:21:41.869] Starting syslogd/klogd: done [2025-09-24 07:21:41.885] DML Start [2025-09-24 07:21:42.077] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:21:42.300] DML res1: 0 [2025-09-24 07:21:42.731] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:21:42.755] Read Success [2025-09-24 07:21:42.755] Verifying certificate... [2025-09-24 07:21:42.994] Verified OK [2025-09-24 07:21:43.026] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:21:44.717] Verified OK [2025-09-24 07:21:44.717] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:21:45.260] Verified OK [2025-09-24 07:21:45.260] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:21:47.914] fs.protected_hardlinks = 1 [2025-09-24 07:21:47.914] fs.protected_symlinks = 1 [2025-09-24 07:21:47.930] kernel.modules_disabled = 1 [2025-09-24 07:21:48.122] [2025-09-24 07:21:48.122] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:21:49.391] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:21:57.094] SBL1:1210.0.1.0 [2025-09-24 07:21:57.141] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:21:58.709] SBL2:1210.0.1.0 [2025-09-24 07:21:58.756] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:21:58.852] j-A [2025-09-24 07:22:06.206] The R5 Autosar Classic is running [2025-09-24 07:22:06.231] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:22:06.231] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:22:06.838] INIT: version 2.96 booting [2025-09-24 07:22:06.950] INIT: Entering runlevel: 5 [2025-09-24 07:22:07.110] mtd24 attached [2025-09-24 07:22:07.126] mtd28 attached [2025-09-24 07:22:07.158] ubi0:textures is mounted. [2025-09-24 07:22:07.158] ubi1:animations is mounted. [2025-09-24 07:22:07.174] mtd32 attached [2025-09-24 07:22:07.190] RTNETLINK answers: File exists [2025-09-24 07:22:07.244] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:22:07.244] ubi2:dml_code is mounted. [2025-09-24 07:22:07.244] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:22:07.244] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:22:07.244] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:22:07.244] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:22:07.244] data.LB_FadeInType0=100 [2025-09-24 07:22:07.244] data.CHLH_FadeInType0=0 [2025-09-24 07:22:07.244] data.WU_FadeInDelay=0 [2025-09-24 07:22:07.244] max_time_out=0 [2025-09-24 07:22:07.244] No splash screen [2025-09-24 07:22:07.244] stop dss Done [2025-09-24 07:22:07.276] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:22:07.292] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:22:07.324] /dev/mem opened. [2025-09-24 07:22:07.324] Memory mapped at address 0xffff8743e000. [2025-09-24 07:22:07.324] Read at address 0x00600018 (0xffff8743e018): 0x00000000 [2025-09-24 07:22:07.324] Write at address 0x00600018 (0xffff8743e018): 0x00400040, readback 0x00400040 [2025-09-24 07:22:07.388] Loaded PowerVR consumer services. [2025-09-24 07:22:07.572] Waiting data available... [2025-09-24 07:22:07.572] 512+0 records in [2025-09-24 07:22:07.572] 512+0 records out [2025-09-24 07:22:07.588] Starting syslogd/klogd: done [2025-09-24 07:22:07.605] DML Start [2025-09-24 07:22:07.780] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:22:08.005] DML res1: 0 [2025-09-24 07:22:08.469] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:22:08.469] Read Success [2025-09-24 07:22:08.484] Verifying certificate... [2025-09-24 07:22:08.723] Verified OK [2025-09-24 07:22:08.739] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:22:10.435] Verified OK [2025-09-24 07:22:10.435] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:22:11.027] Verified OK [2025-09-24 07:22:11.047] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:22:13.765] fs.protected_hardlinks = 1 [2025-09-24 07:22:13.765] fs.protected_symlinks = 1 [2025-09-24 07:22:13.782] kernel.modules_disabled = 1 [2025-09-24 07:22:13.973] [2025-09-24 07:22:13.973] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:22:15.121] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:22:22.855] SBL1:1210.0.1.0 [2025-09-24 07:22:22.903] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:22:24.469] SBL2:1210.0.1.0 [2025-09-24 07:22:24.517] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:22:24.613] j-A [2025-09-24 07:22:31.967] The R5 Autosar Classic is running [2025-09-24 07:22:31.988] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:22:31.988] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:22:32.596] INIT: version 2.96 booting [2025-09-24 07:22:32.708] INIT: Entering runlevel: 5 [2025-09-24 07:22:32.867] mtd28 attached [2025-09-24 07:22:32.867] mtd32 attached [2025-09-24 07:22:32.883] mtd24 attached [2025-09-24 07:22:32.931] RTNETLINK answers: File exists [2025-09-24 07:22:32.931] ubi0:animations is mounted. [2025-09-24 07:22:32.997] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:22:32.997] ubi2:textures is mounted. [2025-09-24 07:22:32.997] ubi1:dml_code is mounted. [2025-09-24 07:22:32.997] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:22:32.997] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:22:32.997] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:22:32.997] data.LB_FadeInType0=100 [2025-09-24 07:22:32.997] data.CHLH_FadeInType0=0 [2025-09-24 07:22:32.997] data.WU_FadeInDelay=0 [2025-09-24 07:22:32.997] max_time_out=0 [2025-09-24 07:22:32.997] No splash screen [2025-09-24 07:22:32.997] stop dss Done [2025-09-24 07:22:32.997] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:22:33.071] /dev/mem opened. [2025-09-24 07:22:33.071] Memory mapped at address 0xffff89044000. [2025-09-24 07:22:33.071] Read at address 0x00600018 (0xffff89044018): 0x00000000 [2025-09-24 07:22:33.071] Write at address 0x00600018 (0xffff89044018): 0x00400040, readback 0x00400040 [2025-09-24 07:22:33.071] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:22:33.093] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:22:33.222] Loaded PowerVR consumer services. [2025-09-24 07:22:33.341] Waiting data available... [2025-09-24 07:22:33.341] 512+0 records in [2025-09-24 07:22:33.341] 512+0 records out [2025-09-24 07:22:33.373] Starting syslogd/klogd: done [2025-09-24 07:22:33.389] DML Start [2025-09-24 07:22:33.533] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:22:33.773] DML res1: 0 [2025-09-24 07:22:34.276] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:22:34.276] Read Success [2025-09-24 07:22:34.276] Verifying certificate... [2025-09-24 07:22:34.532] Verified OK [2025-09-24 07:22:34.548] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:22:36.307] Verified OK [2025-09-24 07:22:36.307] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:22:36.878] Verified OK [2025-09-24 07:22:36.878] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:22:39.309] fs.protected_hardlinks = 1 [2025-09-24 07:22:39.325] fs.protected_symlinks = 1 [2025-09-24 07:22:39.325] kernel.modules_disabled = 1 [2025-09-24 07:22:39.517] [2025-09-24 07:22:39.517] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:22:40.818] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:22:48.632] SBL1:1210.0.1.0 [2025-09-24 07:22:48.679] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:22:50.246] SBL2:1210.0.1.0 [2025-09-24 07:22:50.294] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:22:50.391] j-A [2025-09-24 07:22:57.745] The R5 Autosar Classic is running [2025-09-24 07:22:57.745] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:22:57.766] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:22:58.374] INIT: version 2.96 booting [2025-09-24 07:22:58.485] INIT: Entering runlevel: 5 [2025-09-24 07:22:58.645] mtd32 attached [2025-09-24 07:22:58.661] mtd28 attached [2025-09-24 07:22:58.661] mtd24 attached [2025-09-24 07:22:58.693] ubi0:dml_code is mounted. [2025-09-24 07:22:58.709] RTNETLINK answers: File exists [2025-09-24 07:22:58.750] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:22:58.750] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:22:58.750] ubi2:textures is mounted. [2025-09-24 07:22:58.750] ubi1:animations is mounted. [2025-09-24 07:22:58.750] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:22:58.750] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:22:58.750] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:22:58.773] data.LB_FadeInType0=100 [2025-09-24 07:22:58.773] data.CHLH_FadeInType0=0 [2025-09-24 07:22:58.773] data.WU_FadeInDelay=0 [2025-09-24 07:22:58.773] max_time_out=0 [2025-09-24 07:22:58.773] No splash screen [2025-09-24 07:22:58.773] stop dss Done [2025-09-24 07:22:58.789] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:22:58.789] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:22:58.858] /dev/mem opened. [2025-09-24 07:22:58.858] Memory mapped at address 0xffffb8481000. [2025-09-24 07:22:58.858] Read at address 0x00600018 (0xffffb8481018): 0x00000000 [2025-09-24 07:22:58.858] Write at address 0x00600018 (0xffffb8481018): 0x00400040, readback 0x00400040 [2025-09-24 07:22:58.938] Loaded PowerVR consumer services. [2025-09-24 07:22:59.081] 512+0 records in [2025-09-24 07:22:59.097] 512+0 records out [2025-09-24 07:22:59.097] Waiting data available... [2025-09-24 07:22:59.113] Starting syslogd/klogd: done [2025-09-24 07:22:59.129] DML Start [2025-09-24 07:22:59.290] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:22:59.513] DML res1: 0 [2025-09-24 07:23:00.018] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:23:00.018] Read Success [2025-09-24 07:23:00.018] Verifying certificate... [2025-09-24 07:23:00.242] Verified OK [2025-09-24 07:23:00.290] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:23:01.952] Verified OK [2025-09-24 07:23:01.952] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:23:02.607] Verified OK [2025-09-24 07:23:02.607] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:23:05.287] fs.protected_hardlinks = 1 [2025-09-24 07:23:05.287] fs.protected_symlinks = 1 [2025-09-24 07:23:05.287] kernel.modules_disabled = 1 [2025-09-24 07:23:05.478] [2025-09-24 07:23:05.478] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:23:06.642] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:23:14.388] SBL1:1210.0.1.0 [2025-09-24 07:23:14.437] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:23:16.020] SBL2:1210.0.1.0 [2025-09-24 07:23:16.052] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:23:16.163] j-A [2025-09-24 07:23:23.501] The R5 Autosar Classic is running [2025-09-24 07:23:23.526] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:23:23.526] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:23:24.134] INIT: version 2.96 booting [2025-09-24 07:23:24.246] INIT: Entering runlevel: 5 [2025-09-24 07:23:24.406] mtd24 attached [2025-09-24 07:23:24.406] mtd32 attached [2025-09-24 07:23:24.422] mtd28 attached [2025-09-24 07:23:24.470] RTNETLINK answers: File exists [2025-09-24 07:23:24.511] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:23:24.511] ubi1:dml_code is mounted. [2025-09-24 07:23:24.511] ubi2:animations is mounted. [2025-09-24 07:23:24.511] ubi0:textures is mounted. [2025-09-24 07:23:24.511] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:23:24.511] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:23:24.511] data.LB_FadeInType0=100 [2025-09-24 07:23:24.511] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:23:24.537] data.CHLH_FadeInType0=0 [2025-09-24 07:23:24.537] data.WU_FadeInDelay=0 [2025-09-24 07:23:24.537] max_time_out=0 [2025-09-24 07:23:24.537] No splash screen [2025-09-24 07:23:24.537] stop dss Done [2025-09-24 07:23:24.537] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:23:24.611] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:23:24.611] /dev/mem opened. [2025-09-24 07:23:24.611] Memory mapped at address 0xffff945a9000. [2025-09-24 07:23:24.611] Read at address 0x00600018 (0xffff945a9018): 0x00000000 [2025-09-24 07:23:24.611] Write at address 0x00600018 (0xffff945a9018): 0x00400040, readback 0x00400040 [2025-09-24 07:23:24.611] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:23:24.819] Loaded PowerVR consumer services. [2025-09-24 07:23:24.851] Waiting data available... [2025-09-24 07:23:24.867] 512+0 records in [2025-09-24 07:23:24.867] 512+0 records out [2025-09-24 07:23:24.915] Starting syslogd/klogd: done [2025-09-24 07:23:24.931] DML Start [2025-09-24 07:23:25.091] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:23:25.282] DML res1: 0 [2025-09-24 07:23:25.773] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:23:25.773] Read Success [2025-09-24 07:23:25.773] Verifying certificate... [2025-09-24 07:23:26.077] Verified OK [2025-09-24 07:23:26.077] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:23:27.738] Verified OK [2025-09-24 07:23:27.738] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:23:28.409] Verified OK [2025-09-24 07:23:28.409] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:23:31.014] fs.protected_hardlinks = 1 [2025-09-24 07:23:31.030] fs.protected_symlinks = 1 [2025-09-24 07:23:31.030] kernel.modules_disabled = 1 [2025-09-24 07:23:31.222] [2025-09-24 07:23:31.222] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:23:32.440] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:23:40.157] SBL1:1210.0.1.0 [2025-09-24 07:23:40.205] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:23:41.772] SBL2:1210.0.1.0 [2025-09-24 07:23:41.820] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:23:41.916] j-A [2025-09-24 07:23:49.271] The R5 Autosar Classic is running [2025-09-24 07:23:49.296] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:23:49.296] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:23:49.904] INIT: version 2.96 booting [2025-09-24 07:23:50.016] INIT: Entering runlevel: 5 [2025-09-24 07:23:50.160] mtd24 attached [2025-09-24 07:23:50.176] mtd28 attached [2025-09-24 07:23:50.191] mtd32 attached [2025-09-24 07:23:50.223] ubi0:textures is mounted. [2025-09-24 07:23:50.239] RTNETLINK answers: File exists [2025-09-24 07:23:50.239] ubi1:animations is mounted. [2025-09-24 07:23:50.294] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:23:50.294] ubi2:dml_code is mounted. [2025-09-24 07:23:50.294] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:23:50.294] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:23:50.294] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:23:50.294] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:23:50.294] data.LB_FadeInType0=100 [2025-09-24 07:23:50.294] data.CHLH_FadeInType0=0 [2025-09-24 07:23:50.294] data.WU_FadeInDelay=0 [2025-09-24 07:23:50.294] max_time_out=0 [2025-09-24 07:23:50.294] No splash screen [2025-09-24 07:23:50.294] stop dss Done [2025-09-24 07:23:50.364] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:23:50.364] /dev/mem opened. [2025-09-24 07:23:50.364] Memory mapped at address 0xffffa764d000. [2025-09-24 07:23:50.364] Read at address 0x00600018 (0xffffa764d018): 0x00000000 [2025-09-24 07:23:50.364] Write at address 0x00600018 (0xffffa764d018): 0x00400040, readback 0x00400040 [2025-09-24 07:23:50.364] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:23:50.460] Loaded PowerVR consumer services. [2025-09-24 07:23:50.604] Waiting data available... [2025-09-24 07:23:50.604] 512+0 records in [2025-09-24 07:23:50.620] 512+0 records out [2025-09-24 07:23:50.651] Starting syslogd/klogd: done [2025-09-24 07:23:50.683] DML Start [2025-09-24 07:23:50.876] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:23:51.083] DML res1: 0 [2025-09-24 07:23:51.499] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:23:51.515] Read Success [2025-09-24 07:23:51.515] Verifying certificate... [2025-09-24 07:23:51.755] Verified OK [2025-09-24 07:23:51.771] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:23:53.417] Verified OK [2025-09-24 07:23:53.417] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:23:54.044] Verified OK [2025-09-24 07:23:54.044] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:23:56.747] fs.protected_hardlinks = 1 [2025-09-24 07:23:56.777] fs.protected_symlinks = 1 [2025-09-24 07:23:56.778] kernel.modules_disabled = 1 [2025-09-24 07:23:56.969] [2025-09-24 07:23:56.969] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:23:58.171] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:24:05.939] SBL1:1210.0.1.0 [2025-09-24 07:24:05.971] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:24:07.554] SBL2:1210.0.1.0 [2025-09-24 07:24:07.586] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:24:07.698] j-A [2025-09-24 07:24:15.072] The R5 Autosar Classic is running [2025-09-24 07:24:15.072] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:24:15.072] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:24:15.680] INIT: version 2.96 booting [2025-09-24 07:24:15.792] INIT: Entering runlevel: 5 [2025-09-24 07:24:15.951] mtd28 attached [2025-09-24 07:24:15.951] mtd24 attached [2025-09-24 07:24:15.968] mtd32 attached [2025-09-24 07:24:16.016] ubi0:animations is mounted. [2025-09-24 07:24:16.082] RTNETLINK answers: File exists [2025-09-24 07:24:16.082] ubi1:textures is mounted. [2025-09-24 07:24:16.082] ubi2:dml_code is mounted. [2025-09-24 07:24:16.082] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:24:16.082] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:24:16.082] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:24:16.082] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:24:16.082] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:24:16.082] data.LB_FadeInType0=100 [2025-09-24 07:24:16.082] data.CHLH_FadeInType0=0 [2025-09-24 07:24:16.082] data.WU_FadeInDelay=0 [2025-09-24 07:24:16.082] max_time_out=0 [2025-09-24 07:24:16.082] No splash screen [2025-09-24 07:24:16.082] stop dss Done [2025-09-24 07:24:16.148] /dev/mem opened. [2025-09-24 07:24:16.148] Memory mapped at address 0xffffa0631000. [2025-09-24 07:24:16.148] Read at address 0x00600018 (0xffffa0631018): 0x00000000 [2025-09-24 07:24:16.148] Write at address 0x00600018 (0xffffa0631018): 0x00400040, readback 0x00400040 [2025-09-24 07:24:16.165] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:24:16.188] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:24:16.252] Loaded PowerVR consumer services. [2025-09-24 07:24:16.405] Waiting data available... [2025-09-24 07:24:16.405] 512+0 records in [2025-09-24 07:24:16.405] 512+0 records out [2025-09-24 07:24:16.437] Starting syslogd/klogd: done [2025-09-24 07:24:16.453] DML Start [2025-09-24 07:24:16.645] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:24:16.885] DML res1: 0 [2025-09-24 07:24:17.312] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:24:17.312] Read Success [2025-09-24 07:24:17.312] Verifying certificate... [2025-09-24 07:24:17.535] Verified OK [2025-09-24 07:24:17.535] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:24:19.317] Verified OK [2025-09-24 07:24:19.317] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:24:19.915] Verified OK [2025-09-24 07:24:19.915] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:24:22.489] fs.protected_hardlinks = 1 [2025-09-24 07:24:22.489] fs.protected_symlinks = 1 [2025-09-24 07:24:22.505] kernel.modules_disabled = 1 [2025-09-24 07:24:22.697] [2025-09-24 07:24:22.697] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:24:23.950] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:24:31.684] SBL1:1210.0.1.0 [2025-09-24 07:24:31.732] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:24:33.299] SBL2:1210.0.1.0 [2025-09-24 07:24:33.347] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:24:33.443] j-A [2025-09-24 07:24:40.798] The R5 Autosar Classic is running [2025-09-24 07:24:40.820] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:24:40.820] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:24:41.428] INIT: version 2.96 booting [2025-09-24 07:24:41.540] INIT: Entering runlevel: 5 [2025-09-24 07:24:41.683] mtd24 attached [2025-09-24 07:24:41.699] mtd28 attached [2025-09-24 07:24:41.716] mtd32 attached [2025-09-24 07:24:41.732] ubi0:textures is mounted. [2025-09-24 07:24:41.764] ubi1:animations is mounted. [2025-09-24 07:24:41.764] RTNETLINK answers: File exists [2025-09-24 07:24:41.821] ubi2:dml_code is mounted. [2025-09-24 07:24:41.821] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:24:41.821] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:24:41.821] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:24:41.821] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:24:41.821] data.LB_FadeInType0=100 [2025-09-24 07:24:41.821] data.CHLH_FadeInType0=0 [2025-09-24 07:24:41.821] data.WU_FadeInDelay=0 [2025-09-24 07:24:41.821] max_time_out=0 [2025-09-24 07:24:41.821] No splash screen [2025-09-24 07:24:41.821] stop dss Done [2025-09-24 07:24:41.821] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:24:41.922] /dev/mem opened. [2025-09-24 07:24:41.922] Memory mapped at address 0xffffb7b7c000. [2025-09-24 07:24:41.922] Read at address 0x00600018 (0xffffb7b7c018): 0x00000000 [2025-09-24 07:24:41.922] Write at address 0x00600018 (0xffffb7b7c018): 0x00400040, readback 0x00400040 [2025-09-24 07:24:41.922] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:24:41.922] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:24:42.114] Loaded PowerVR consumer services. [2025-09-24 07:24:42.146] Waiting data available... [2025-09-24 07:24:42.162] 512+0 records in [2025-09-24 07:24:42.162] 512+0 records out [2025-09-24 07:24:42.179] Starting syslogd/klogd: done [2025-09-24 07:24:42.195] DML Start [2025-09-24 07:24:42.386] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:24:42.562] DML res1: 0 [2025-09-24 07:24:43.097] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:24:43.097] Read Success [2025-09-24 07:24:43.097] Verifying certificate... [2025-09-24 07:24:43.385] Verified OK [2025-09-24 07:24:43.401] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:24:44.968] Verified OK [2025-09-24 07:24:44.968] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:24:45.591] Verified OK [2025-09-24 07:24:45.591] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:24:48.197] fs.protected_hardlinks = 1 [2025-09-24 07:24:48.197] fs.protected_symlinks = 1 [2025-09-24 07:24:48.213] kernel.modules_disabled = 1 [2025-09-24 07:24:48.405] [2025-09-24 07:24:48.405] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:24:49.665] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:24:57.446] SBL1:1210.0.1.0 [2025-09-24 07:24:57.494] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:24:59.061] SBL2:1210.0.1.0 [2025-09-24 07:24:59.108] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:24:59.204] j-A [2025-09-24 07:25:06.559] The R5 Autosar Classic is running [2025-09-24 07:25:06.582] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:25:06.582] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:25:07.190] INIT: version 2.96 booting [2025-09-24 07:25:07.302] INIT: Entering runlevel: 5 [2025-09-24 07:25:07.461] mtd32 attached [2025-09-24 07:25:07.461] mtd28 attached [2025-09-24 07:25:07.477] mtd24 attached [2025-09-24 07:25:07.584] RTNETLINK answers: File exists [2025-09-24 07:25:07.584] ubi1:animations is mounted. [2025-09-24 07:25:07.584] ubi0:dml_code is mounted. [2025-09-24 07:25:07.584] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:25:07.584] ubi2:textures is mounted. [2025-09-24 07:25:07.584] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:25:07.584] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:25:07.584] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:25:07.584] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:25:07.584] data.LB_FadeInType0=100 [2025-09-24 07:25:07.584] data.CHLH_FadeInType0=0 [2025-09-24 07:25:07.584] data.WU_FadeInDelay=0 [2025-09-24 07:25:07.584] max_time_out=0 [2025-09-24 07:25:07.584] No splash screen [2025-09-24 07:25:07.584] stop dss Done [2025-09-24 07:25:07.653] /dev/mem opened. [2025-09-24 07:25:07.653] Memory mapped at address 0xffffa1eaa000. [2025-09-24 07:25:07.653] Read at address 0x00600018 (0xffffa1eaa018): 0x00000000 [2025-09-24 07:25:07.653] Write at address 0x00600018 (0xffffa1eaa018): 0x00400040, readback 0x00400040 [2025-09-24 07:25:07.684] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:25:07.684] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:25:07.860] Loaded PowerVR consumer services. [2025-09-24 07:25:07.944] 512+0 records in [2025-09-24 07:25:07.944] 512+0 records out [2025-09-24 07:25:07.944] Waiting data available... [2025-09-24 07:25:07.960] Starting syslogd/klogd: done [2025-09-24 07:25:07.976] DML Start [2025-09-24 07:25:08.136] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:25:08.328] DML res1: 0 [2025-09-24 07:25:08.840] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:25:08.861] Read Success [2025-09-24 07:25:08.861] Verifying certificate... [2025-09-24 07:25:09.116] Verified OK [2025-09-24 07:25:09.132] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:25:10.756] Verified OK [2025-09-24 07:25:10.756] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:25:11.369] Verified OK [2025-09-24 07:25:11.369] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:25:13.911] fs.protected_hardlinks = 1 [2025-09-24 07:25:13.911] fs.protected_symlinks = 1 [2025-09-24 07:25:13.927] kernel.modules_disabled = 1 [2025-09-24 07:25:14.119] [2025-09-24 07:25:14.119] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:25:15.444] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:25:23.211] SBL1:1210.0.1.0 [2025-09-24 07:25:23.243] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:25:24.826] SBL2:1210.0.1.0 [2025-09-24 07:25:24.858] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:25:24.969] j-A [2025-09-24 07:25:32.343] The R5 Autosar Classic is running [2025-09-24 07:25:32.343] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:25:32.343] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:25:32.950] INIT: version 2.96 booting [2025-09-24 07:25:33.063] INIT: Entering runlevel: 5 [2025-09-24 07:25:33.222] mtd24 attached [2025-09-24 07:25:33.222] mtd28 attached [2025-09-24 07:25:33.238] mtd32 attached [2025-09-24 07:25:33.287] ubi0:textures is mounted. [2025-09-24 07:25:33.287] RTNETLINK answers: File exists [2025-09-24 07:25:33.326] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:25:33.326] ubi1:animations is mounted. [2025-09-24 07:25:33.326] ubi2:dml_code is mounted. [2025-09-24 07:25:33.326] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:25:33.326] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:25:33.326] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:25:33.326] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:25:33.351] data.LB_FadeInType0=100 [2025-09-24 07:25:33.351] data.CHLH_FadeInType0=0 [2025-09-24 07:25:33.351] data.WU_FadeInDelay=0 [2025-09-24 07:25:33.351] max_time_out=0 [2025-09-24 07:25:33.351] No splash screen [2025-09-24 07:25:33.351] stop dss Done [2025-09-24 07:25:33.382] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:25:33.420] /dev/mem opened. [2025-09-24 07:25:33.420] Memory mapped at address 0xffffab8a3000. [2025-09-24 07:25:33.420] Read at address 0x00600018 (0xffffab8a3018): 0x00000000 [2025-09-24 07:25:33.420] Write at address 0x00600018 (0xffffab8a3018): 0x00400040, readback 0x00400040 [2025-09-24 07:25:33.420] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:25:33.500] Loaded PowerVR consumer services. [2025-09-24 07:25:33.660] 512+0 records in [2025-09-24 07:25:33.660] 512+0 records out [2025-09-24 07:25:33.676] Waiting data available... [2025-09-24 07:25:33.708] Starting syslogd/klogd: done [2025-09-24 07:25:33.724] DML Start [2025-09-24 07:25:33.931] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:25:34.187] DML res1: 0 [2025-09-24 07:25:34.601] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:25:34.601] Read Success [2025-09-24 07:25:34.601] Verifying certificate... [2025-09-24 07:25:34.856] Verified OK [2025-09-24 07:25:34.888] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:25:36.390] Verified OK [2025-09-24 07:25:36.390] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:25:37.029] Verified OK [2025-09-24 07:25:37.029] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:25:39.827] fs.protected_hardlinks = 1 [2025-09-24 07:25:39.827] fs.protected_symlinks = 1 [2025-09-24 07:25:39.843] kernel.modules_disabled = 1 [2025-09-24 07:25:40.035] [2025-09-24 07:25:40.035] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:25:41.249] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:25:48.971] SBL1:1210.0.1.0 [2025-09-24 07:25:49.019] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:25:50.586] SBL2:1210.0.1.0 [2025-09-24 07:25:50.633] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:25:50.730] j-A [2025-09-24 07:25:58.085] The R5 Autosar Classic is running [2025-09-24 07:25:58.085] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:25:58.106] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:25:58.713] INIT: version 2.96 booting [2025-09-24 07:25:58.826] INIT: Entering runlevel: 5 [2025-09-24 07:25:58.969] mtd24 attached [2025-09-24 07:25:58.985] mtd28 attached [2025-09-24 07:25:59.001] mtd32 attached [2025-09-24 07:25:59.017] ubi0:textures is mounted. [2025-09-24 07:25:59.049] ubi1:animations is mounted. [2025-09-24 07:25:59.049] RTNETLINK answers: File exists [2025-09-24 07:25:59.104] ubi2:dml_code is mounted. [2025-09-24 07:25:59.104] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:25:59.104] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:25:59.104] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:25:59.104] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:25:59.104] data.LB_FadeInType0=100 [2025-09-24 07:25:59.104] data.CHLH_FadeInType0=0 [2025-09-24 07:25:59.104] data.WU_FadeInDelay=0 [2025-09-24 07:25:59.104] max_time_out=0 [2025-09-24 07:25:59.104] No splash screen [2025-09-24 07:25:59.104] stop dss Done [2025-09-24 07:25:59.104] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:25:59.135] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:25:59.179] /dev/mem opened. [2025-09-24 07:25:59.179] Memory mapped at address 0xffffbacb7000. [2025-09-24 07:25:59.179] Read at address 0x00600018 (0xffffbacb7018): 0x00000000 [2025-09-24 07:25:59.179] Write at address 0x00600018 (0xffffbacb7018): 0x00400040, readback 0x00400040 [2025-09-24 07:25:59.179] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:25:59.387] Loaded PowerVR consumer services. [2025-09-24 07:25:59.434] Waiting data available... [2025-09-24 07:25:59.434] 512+0 records in [2025-09-24 07:25:59.434] 512+0 records out [2025-09-24 07:25:59.450] Starting syslogd/klogd: done [2025-09-24 07:25:59.466] DML Start [2025-09-24 07:25:59.626] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:25:59.865] DML res1: 0 [2025-09-24 07:26:00.368] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:26:00.368] Read Success [2025-09-24 07:26:00.368] Verifying certificate... [2025-09-24 07:26:00.640] Verified OK [2025-09-24 07:26:00.656] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:26:02.160] Verified OK [2025-09-24 07:26:02.160] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:26:02.847] Verified OK [2025-09-24 07:26:02.847] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:26:05.629] fs.protected_hardlinks = 1 [2025-09-24 07:26:05.645] fs.protected_symlinks = 1 [2025-09-24 07:26:05.645] kernel.modules_disabled = 1 [2025-09-24 07:26:05.853] [2025-09-24 07:26:05.853] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:26:06.966] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:26:14.719] SBL1:1210.0.1.0 [2025-09-24 07:26:14.750] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:26:16.333] SBL2:1210.0.1.0 [2025-09-24 07:26:16.365] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:26:16.477] j-A [2025-09-24 07:26:23.847] The R5 Autosar Classic is running [2025-09-24 07:26:23.847] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:26:23.847] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:26:24.455] INIT: version 2.96 booting [2025-09-24 07:26:24.566] INIT: Entering runlevel: 5 [2025-09-24 07:26:24.727] mtd24 attached [2025-09-24 07:26:24.727] mtd32 attached [2025-09-24 07:26:24.743] mtd28 attached [2025-09-24 07:26:24.791] ubi0:textures is mounted. [2025-09-24 07:26:24.791] RTNETLINK answers: File exists [2025-09-24 07:26:24.807] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:26:24.807] ubi2:animations is mounted. [2025-09-24 07:26:24.842] ubi1:dml_code is mounted. [2025-09-24 07:26:24.842] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:26:24.842] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:26:24.842] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:26:24.842] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:26:24.865] data.LB_FadeInType0=100 [2025-09-24 07:26:24.865] data.CHLH_FadeInType0=0 [2025-09-24 07:26:24.865] data.WU_FadeInDelay=0 [2025-09-24 07:26:24.865] max_time_out=0 [2025-09-24 07:26:24.865] No splash screen [2025-09-24 07:26:24.865] stop dss Done [2025-09-24 07:26:24.954] /dev/mem opened. [2025-09-24 07:26:24.954] Memory mapped at address 0xffffa24c5000. [2025-09-24 07:26:24.954] Read at address 0x00600018 (0xffffa24c5018): 0x00000000 [2025-09-24 07:26:24.954] Write at address 0x00600018 (0xffffa24c5018): 0x00400040, readback 0x00400040 [2025-09-24 07:26:24.954] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:26:24.954] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:26:25.066] Loaded PowerVR consumer services. [2025-09-24 07:26:25.177] Waiting data available... [2025-09-24 07:26:25.177] 512+0 records in [2025-09-24 07:26:25.177] 512+0 records out [2025-09-24 07:26:25.226] Starting syslogd/klogd: done [2025-09-24 07:26:25.242] DML Start [2025-09-24 07:26:25.401] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:26:25.609] DML res1: 0 [2025-09-24 07:26:26.120] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:26:26.120] Read Success [2025-09-24 07:26:26.120] Verifying certificate... [2025-09-24 07:26:26.360] Verified OK [2025-09-24 07:26:26.376] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:26:28.039] Verified OK [2025-09-24 07:26:28.039] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:26:28.709] Verified OK [2025-09-24 07:26:28.709] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:26:31.378] fs.protected_hardlinks = 1 [2025-09-24 07:26:31.394] fs.protected_symlinks = 1 [2025-09-24 07:26:31.394] kernel.modules_disabled = 1 [2025-09-24 07:26:31.603] [2025-09-24 07:26:31.603] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:26:32.765] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:26:40.442] SBL1:1210.0.1.0 [2025-09-24 07:26:40.474] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:26:42.057] SBL2:1210.0.1.0 [2025-09-24 07:26:42.089] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:26:42.200] j-A [2025-09-24 07:26:49.575] The R5 Autosar Classic is running [2025-09-24 07:26:49.575] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:26:49.575] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:26:50.183] INIT: version 2.96 booting [2025-09-24 07:26:50.294] INIT: Entering runlevel: 5 [2025-09-24 07:26:50.438] mtd24 attached [2025-09-24 07:26:50.454] mtd28 attached [2025-09-24 07:26:50.454] mtd32 attached [2025-09-24 07:26:50.502] ubi0:textures is mounted. [2025-09-24 07:26:50.518] RTNETLINK answers: File exists [2025-09-24 07:26:50.518] ubi1:animations is mounted. [2025-09-24 07:26:50.573] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:26:50.573] ubi2:dml_code is mounted. [2025-09-24 07:26:50.573] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:26:50.573] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:26:50.573] data.LB_FadeInType0=100 [2025-09-24 07:26:50.573] data.CHLH_FadeInType0=0 [2025-09-24 07:26:50.573] data.WU_FadeInDelay=0 [2025-09-24 07:26:50.573] max_time_out=0 [2025-09-24 07:26:50.573] No splash screen [2025-09-24 07:26:50.573] stop dss Done [2025-09-24 07:26:50.573] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:26:50.573] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:26:50.656] /dev/mem opened. [2025-09-24 07:26:50.656] Memory mapped at address 0xffffa8f87000. [2025-09-24 07:26:50.656] Read at address 0x00600018 (0xffffa8f87018): 0x00000000 [2025-09-24 07:26:50.656] Write at address 0x00600018 (0xffffa8f87018): 0x00400040, readback 0x00400040 [2025-09-24 07:26:50.656] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:26:50.672] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:26:50.880] Loaded PowerVR consumer services. [2025-09-24 07:26:50.912] 512+0 records in [2025-09-24 07:26:50.912] 512+0 records out [2025-09-24 07:26:50.944] Waiting data available... [2025-09-24 07:26:50.960] Starting syslogd/klogd: done [2025-09-24 07:26:50.976] DML Start [2025-09-24 07:26:51.120] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:26:51.343] DML res1: 0 [2025-09-24 07:26:51.848] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:26:51.848] Read Success [2025-09-24 07:26:51.848] Verifying certificate... [2025-09-24 07:26:52.152] Verified OK [2025-09-24 07:26:52.168] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:26:53.830] Verified OK [2025-09-24 07:26:53.830] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:26:54.419] Verified OK [2025-09-24 07:26:54.419] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:26:57.121] fs.protected_hardlinks = 1 [2025-09-24 07:26:57.136] fs.protected_symlinks = 1 [2025-09-24 07:26:57.136] kernel.modules_disabled = 1 [2025-09-24 07:26:57.345] [2025-09-24 07:26:57.345] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:26:58.475] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:27:06.196] SBL1:1210.0.1.0 [2025-09-24 07:27:06.228] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:27:07.811] SBL2:1210.0.1.0 [2025-09-24 07:27:07.843] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:27:07.955] j-A [2025-09-24 07:27:15.293] The R5 Autosar Classic is running [2025-09-24 07:27:15.324] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:27:15.324] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:27:15.931] INIT: version 2.96 booting [2025-09-24 07:27:16.044] INIT: Entering runlevel: 5 [2025-09-24 07:27:16.187] mtd24 attached [2025-09-24 07:27:16.204] mtd28 attached [2025-09-24 07:27:16.220] mtd32 attached [2025-09-24 07:27:16.267] ubi0:textures is mounted. [2025-09-24 07:27:16.267] RTNETLINK answers: File exists [2025-09-24 07:27:16.328] ubi1:animations is mounted. [2025-09-24 07:27:16.328] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:27:16.328] ubi2:dml_code is mounted. [2025-09-24 07:27:16.328] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:27:16.328] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:27:16.328] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:27:16.328] data.LB_FadeInType0=100 [2025-09-24 07:27:16.328] data.CHLH_FadeInType0=0 [2025-09-24 07:27:16.328] data.WU_FadeInDelay=0 [2025-09-24 07:27:16.328] max_time_out=0 [2025-09-24 07:27:16.328] No splash screen [2025-09-24 07:27:16.328] stop dss Done [2025-09-24 07:27:16.328] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:27:16.404] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:27:16.404] /dev/mem opened. [2025-09-24 07:27:16.404] Memory mapped at address 0xffffb9686000. [2025-09-24 07:27:16.404] Read at address 0x00600018 (0xffffb9686018): 0x00000000 [2025-09-24 07:27:16.404] Write at address 0x00600018 (0xffffb9686018): 0x00400040, readback 0x00400040 [2025-09-24 07:27:16.404] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:27:16.532] Loaded PowerVR consumer services. [2025-09-24 07:27:16.660] Waiting data available... [2025-09-24 07:27:16.675] 512+0 records in [2025-09-24 07:27:16.675] 512+0 records out [2025-09-24 07:27:16.724] Starting syslogd/klogd: done [2025-09-24 07:27:16.740] DML Start [2025-09-24 07:27:16.900] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:27:17.139] DML res1: 0 [2025-09-24 07:27:17.597] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:27:17.597] Read Success [2025-09-24 07:27:17.597] Verifying certificate... [2025-09-24 07:27:17.820] Verified OK [2025-09-24 07:27:17.836] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:27:19.592] Verified OK [2025-09-24 07:27:19.592] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:27:20.204] Verified OK [2025-09-24 07:27:20.204] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:27:22.715] fs.protected_hardlinks = 1 [2025-09-24 07:27:22.731] fs.protected_symlinks = 1 [2025-09-24 07:27:22.731] kernel.modules_disabled = 1 [2025-09-24 07:27:22.922] [2025-09-24 07:27:22.922] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:27:24.216] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:27:31.952] SBL1:1210.0.1.0 [2025-09-24 07:27:32.000] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:27:33.567] SBL2:1210.0.1.0 [2025-09-24 07:27:33.599] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:27:33.710] j-A [2025-09-24 07:27:41.086] The R5 Autosar Classic is running [2025-09-24 07:27:41.086] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:27:41.086] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:27:41.693] INIT: version 2.96 booting [2025-09-24 07:27:41.805] INIT: Entering runlevel: 5 [2025-09-24 07:27:41.949] mtd24 attached [2025-09-24 07:27:41.965] mtd28 attached [2025-09-24 07:27:41.981] mtd32 attached [2025-09-24 07:27:42.013] ubi0:textures is mounted. [2025-09-24 07:27:42.029] RTNETLINK answers: File exists [2025-09-24 07:27:42.029] ubi1:animations is mounted. [2025-09-24 07:27:42.082] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:27:42.082] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:27:42.082] ubi2:dml_code is mounted. [2025-09-24 07:27:42.082] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:27:42.082] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:27:42.082] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:27:42.082] data.LB_FadeInType0=100 [2025-09-24 07:27:42.082] data.CHLH_FadeInType0=0 [2025-09-24 07:27:42.082] data.WU_FadeInDelay=0 [2025-09-24 07:27:42.082] max_time_out=0 [2025-09-24 07:27:42.082] No splash screen [2025-09-24 07:27:42.082] stop dss Done [2025-09-24 07:27:42.114] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:27:42.130] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:27:42.169] /dev/mem opened. [2025-09-24 07:27:42.169] Memory mapped at address 0xffff8bb45000. [2025-09-24 07:27:42.169] Read at address 0x00600018 (0xffff8bb45018): 0x00000000 [2025-09-24 07:27:42.169] Write at address 0x00600018 (0xffff8bb45018): 0x00400040, readback 0x00400040 [2025-09-24 07:27:42.345] Loaded PowerVR consumer services. [2025-09-24 07:27:42.409] 512+0 records in [2025-09-24 07:27:42.409] 512+0 records out [2025-09-24 07:27:42.425] Waiting data available... [2025-09-24 07:27:42.441] Starting syslogd/klogd: done [2025-09-24 07:27:42.472] DML Start [2025-09-24 07:27:42.648] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:27:42.856] DML res1: 0 [2025-09-24 07:27:43.329] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:27:43.329] Read Success [2025-09-24 07:27:43.329] Verifying certificate... [2025-09-24 07:27:43.585] Verified OK [2025-09-24 07:27:43.618] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:27:45.103] Verified OK [2025-09-24 07:27:45.103] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:27:45.719] Verified OK [2025-09-24 07:27:45.719] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:27:48.501] fs.protected_hardlinks = 1 [2025-09-24 07:27:48.517] fs.protected_symlinks = 1 [2025-09-24 07:27:48.533] kernel.modules_disabled = 1 [2025-09-24 07:27:48.725] [2025-09-24 07:27:48.725] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:27:49.936] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:27:57.698] SBL1:1210.0.1.0 [2025-09-24 07:27:57.746] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:27:59.313] SBL2:1210.0.1.0 [2025-09-24 07:27:59.345] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:27:59.457] j-A [2025-09-24 07:28:06.831] The R5 Autosar Classic is running [2025-09-24 07:28:06.831] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:28:06.831] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:28:07.438] INIT: version 2.96 booting [2025-09-24 07:28:07.550] INIT: Entering runlevel: 5 [2025-09-24 07:28:07.710] mtd32 attached [2025-09-24 07:28:07.710] mtd24 attached [2025-09-24 07:28:07.726] mtd28 attached [2025-09-24 07:28:07.775] RTNETLINK answers: File exists [2025-09-24 07:28:07.837] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:28:07.837] ubi1:textures is mounted. [2025-09-24 07:28:07.837] ubi2:animations is mounted. [2025-09-24 07:28:07.837] ubi0:dml_code is mounted. [2025-09-24 07:28:07.837] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:28:07.837] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:28:07.837] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:28:07.837] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:28:07.837] data.LB_FadeInType0=100 [2025-09-24 07:28:07.837] data.CHLH_FadeInType0=0 [2025-09-24 07:28:07.837] data.WU_FadeInDelay=0 [2025-09-24 07:28:07.837] max_time_out=0 [2025-09-24 07:28:07.837] No splash screen [2025-09-24 07:28:07.837] stop dss Done [2025-09-24 07:28:07.923] /dev/mem opened. [2025-09-24 07:28:07.923] Memory mapped at address 0xffffbd8fe000. [2025-09-24 07:28:07.923] Read at address 0x00600018 (0xffffbd8fe018): 0x00000000 [2025-09-24 07:28:07.923] Write at address 0x00600018 (0xffffbd8fe018): 0x00400040, readback 0x00400040 [2025-09-24 07:28:07.923] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:28:07.923] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:28:08.131] Loaded PowerVR consumer services. [2025-09-24 07:28:08.163] Waiting data available... [2025-09-24 07:28:08.179] 512+0 records in [2025-09-24 07:28:08.179] 512+0 records out [2025-09-24 07:28:08.227] Starting syslogd/klogd: done [2025-09-24 07:28:08.243] DML Start [2025-09-24 07:28:08.386] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:28:08.626] DML res1: 0 [2025-09-24 07:28:09.074] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:28:09.090] Read Success [2025-09-24 07:28:09.090] Verifying certificate... [2025-09-24 07:28:09.346] Verified OK [2025-09-24 07:28:09.362] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:28:10.973] Verified OK [2025-09-24 07:28:10.973] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:28:11.626] Verified OK [2025-09-24 07:28:11.626] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:28:14.232] fs.protected_hardlinks = 1 [2025-09-24 07:28:14.232] fs.protected_symlinks = 1 [2025-09-24 07:28:14.248] kernel.modules_disabled = 1 [2025-09-24 07:28:14.424] [2025-09-24 07:28:14.424] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:28:15.671] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:28:23.431] SBL1:1210.0.1.0 [2025-09-24 07:28:23.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:28:25.045] SBL2:1210.0.1.0 [2025-09-24 07:28:25.093] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:28:25.189] j-A [2025-09-24 07:28:32.544] The R5 Autosar Classic is running [2025-09-24 07:28:32.566] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:28:32.566] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:28:33.173] INIT: version 2.96 booting [2025-09-24 07:28:33.285] INIT: Entering runlevel: 5 [2025-09-24 07:28:33.446] mtd28 attached [2025-09-24 07:28:33.446] mtd24 attached [2025-09-24 07:28:33.462] mtd32 attached [2025-09-24 07:28:33.509] ubi0:animations is mounted. [2025-09-24 07:28:33.509] RTNETLINK answers: File exists [2025-09-24 07:28:33.572] ubi1:textures is mounted. [2025-09-24 07:28:33.572] ubi2:dml_code is mounted. [2025-09-24 07:28:33.572] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:28:33.572] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:28:33.572] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:28:33.572] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:28:33.572] data.LB_FadeInType0=100 [2025-09-24 07:28:33.572] data.CHLH_FadeInType0=0 [2025-09-24 07:28:33.572] data.WU_FadeInDelay=0 [2025-09-24 07:28:33.572] max_time_out=0 [2025-09-24 07:28:33.572] No splash screen [2025-09-24 07:28:33.572] stop dss Done [2025-09-24 07:28:33.572] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:28:33.604] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:28:33.604] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:28:33.653] /dev/mem opened. [2025-09-24 07:28:33.653] Memory mapped at address 0xffff921b3000. [2025-09-24 07:28:33.653] Read at address 0x00600018 (0xffff921b3018): 0x00000000 [2025-09-24 07:28:33.653] Write at address 0x00600018 (0xffff921b3018): 0x00400040, readback 0x00400040 [2025-09-24 07:28:33.781] Loaded PowerVR consumer services. [2025-09-24 07:28:33.905] Waiting data available... [2025-09-24 07:28:33.905] 512+0 records in [2025-09-24 07:28:33.905] 512+0 records out [2025-09-24 07:28:33.936] Starting syslogd/klogd: done [2025-09-24 07:28:33.953] DML Start [2025-09-24 07:28:34.144] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:28:34.417] DML res1: 0 [2025-09-24 07:28:34.817] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:28:34.833] Read Success [2025-09-24 07:28:34.833] Verifying certificate... [2025-09-24 07:28:35.120] Verified OK [2025-09-24 07:28:35.136] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:28:36.702] Verified OK [2025-09-24 07:28:36.702] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:28:37.358] Verified OK [2025-09-24 07:28:37.358] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:28:40.028] fs.protected_hardlinks = 1 [2025-09-24 07:28:40.059] fs.protected_symlinks = 1 [2025-09-24 07:28:40.059] kernel.modules_disabled = 1 [2025-09-24 07:28:40.235] [2025-09-24 07:28:40.235] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:28:41.478] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:28:49.178] SBL1:1210.0.1.0 [2025-09-24 07:28:49.210] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:28:50.793] SBL2:1210.0.1.0 [2025-09-24 07:28:50.825] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:28:50.936] j-A [2025-09-24 07:28:58.276] The R5 Autosar Classic is running [2025-09-24 07:28:58.301] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:28:58.301] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:28:58.908] INIT: version 2.96 booting [2025-09-24 07:28:59.020] INIT: Entering runlevel: 5 [2025-09-24 07:28:59.180] mtd24 attached [2025-09-24 07:28:59.180] mtd28 attached [2025-09-24 07:28:59.212] mtd32 attached [2025-09-24 07:28:59.243] ubi1:animations is mounted. [2025-09-24 07:28:59.243] ubi0:textures is mounted. [2025-09-24 07:28:59.243] RTNETLINK answers: File exists [2025-09-24 07:28:59.286] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:28:59.286] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:28:59.286] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:28:59.286] ubi2:dml_code is mounted. [2025-09-24 07:28:59.286] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:28:59.286] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:28:59.317] data.LB_FadeInType0=100 [2025-09-24 07:28:59.317] data.CHLH_FadeInType0=0 [2025-09-24 07:28:59.317] data.WU_FadeInDelay=0 [2025-09-24 07:28:59.317] max_time_out=0 [2025-09-24 07:28:59.317] No splash screen [2025-09-24 07:28:59.317] stop dss Done [2025-09-24 07:28:59.343] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:28:59.343] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:28:59.392] /dev/mem opened. [2025-09-24 07:28:59.392] Memory mapped at address 0xffffa12a0000. [2025-09-24 07:28:59.392] Read at address 0x00600018 (0xffffa12a0018): 0x00000000 [2025-09-24 07:28:59.392] Write at address 0x00600018 (0xffffa12a0018): 0x00400040, readback 0x00400040 [2025-09-24 07:28:59.488] Loaded PowerVR consumer services. [2025-09-24 07:28:59.638] Waiting data available... [2025-09-24 07:28:59.638] 512+0 records in [2025-09-24 07:28:59.638] 512+0 records out [2025-09-24 07:28:59.654] Starting syslogd/klogd: done [2025-09-24 07:28:59.670] DML Start [2025-09-24 07:28:59.878] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:29:00.102] DML res1: 0 [2025-09-24 07:29:00.477] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:29:00.477] Read Success [2025-09-24 07:29:00.477] Verifying certificate... [2025-09-24 07:29:00.732] Verified OK [2025-09-24 07:29:00.748] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:29:02.321] Verified OK [2025-09-24 07:29:02.321] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:29:03.037] Verified OK [2025-09-24 07:29:03.037] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:29:05.771] fs.protected_hardlinks = 1 [2025-09-24 07:29:05.786] fs.protected_symlinks = 1 [2025-09-24 07:29:05.786] kernel.modules_disabled = 1 [2025-09-24 07:29:05.979] [2025-09-24 07:29:05.979] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:29:07.201] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:29:14.909] SBL1:1210.0.1.0 [2025-09-24 07:29:14.941] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:29:16.524] SBL2:1210.0.1.0 [2025-09-24 07:29:16.556] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:29:16.668] j-A [2025-09-24 07:29:24.038] The R5 Autosar Classic is running [2025-09-24 07:29:24.038] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:29:24.038] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:29:24.645] INIT: version 2.96 booting [2025-09-24 07:29:24.757] INIT: Entering runlevel: 5 [2025-09-24 07:29:24.917] mtd24 attached [2025-09-24 07:29:24.933] mtd32 attached [2025-09-24 07:29:24.933] mtd28 attached [2025-09-24 07:29:24.981] ubi0:textures is mounted. [2025-09-24 07:29:25.051] RTNETLINK answers: File exists [2025-09-24 07:29:25.051] ubi2:animations is mounted. [2025-09-24 07:29:25.051] ubi1:dml_code is mounted. [2025-09-24 07:29:25.051] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:29:25.051] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:29:25.051] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:29:25.051] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:29:25.051] data.LB_FadeInType0=100 [2025-09-24 07:29:25.051] data.CHLH_FadeInType0=0 [2025-09-24 07:29:25.051] data.WU_FadeInDelay=0 [2025-09-24 07:29:25.051] max_time_out=0 [2025-09-24 07:29:25.051] No splash screen [2025-09-24 07:29:25.051] stop dss Done [2025-09-24 07:29:25.051] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:29:25.130] /dev/mem opened. [2025-09-24 07:29:25.130] Memory mapped at address 0xffff8d156000. [2025-09-24 07:29:25.130] Read at address 0x00600018 (0xffff8d156018): 0x00000000 [2025-09-24 07:29:25.130] Write at address 0x00600018 (0xffff8d156018): 0x00400040, readback 0x00400040 [2025-09-24 07:29:25.130] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:29:25.130] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:29:25.257] Loaded PowerVR consumer services. [2025-09-24 07:29:25.380] Waiting data available... [2025-09-24 07:29:25.380] 512+0 records in [2025-09-24 07:29:25.380] 512+0 records out [2025-09-24 07:29:25.412] Starting syslogd/klogd: done [2025-09-24 07:29:25.428] DML Start [2025-09-24 07:29:25.620] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:29:25.827] DML res1: 0 [2025-09-24 07:29:26.286] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:29:26.286] Read Success [2025-09-24 07:29:26.286] Verifying certificate... [2025-09-24 07:29:26.509] Verified OK [2025-09-24 07:29:26.525] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:29:28.156] Verified OK [2025-09-24 07:29:28.156] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:29:28.804] Verified OK [2025-09-24 07:29:28.804] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:29:31.506] fs.protected_hardlinks = 1 [2025-09-24 07:29:31.533] fs.protected_symlinks = 1 [2025-09-24 07:29:31.533] kernel.modules_disabled = 1 [2025-09-24 07:29:31.708] [2025-09-24 07:29:31.708] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:29:32.933] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:29:40.634] SBL1:1210.0.1.0 [2025-09-24 07:29:40.666] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:29:42.249] SBL2:1210.0.1.0 [2025-09-24 07:29:42.281] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:29:42.392] j-A [2025-09-24 07:29:49.732] The R5 Autosar Classic is running [2025-09-24 07:29:49.757] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:29:49.757] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:29:50.365] INIT: version 2.96 booting [2025-09-24 07:29:50.476] INIT: Entering runlevel: 5 [2025-09-24 07:29:50.636] mtd28 attached [2025-09-24 07:29:50.652] mtd32 attached [2025-09-24 07:29:50.652] mtd24 attached [2025-09-24 07:29:50.701] RTNETLINK answers: File exists [2025-09-24 07:29:50.766] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:29:50.766] ubi0:animations is mounted. [2025-09-24 07:29:50.766] ubi1:dml_code is mounted. [2025-09-24 07:29:50.766] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:29:50.766] ubi2:textures is mounted. [2025-09-24 07:29:50.766] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:29:50.766] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:29:50.766] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:29:50.766] data.LB_FadeInType0=100 [2025-09-24 07:29:50.766] data.CHLH_FadeInType0=0 [2025-09-24 07:29:50.766] data.WU_FadeInDelay=0 [2025-09-24 07:29:50.766] max_time_out=0 [2025-09-24 07:29:50.766] No splash screen [2025-09-24 07:29:50.766] stop dss Done [2025-09-24 07:29:50.813] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:29:50.847] /dev/mem opened. [2025-09-24 07:29:50.847] Memory mapped at address 0xffff882c8000. [2025-09-24 07:29:50.847] Read at address 0x00600018 (0xffff882c8018): 0x00000000 [2025-09-24 07:29:50.847] Write at address 0x00600018 (0xffff882c8018): 0x00400040, readback 0x00400040 [2025-09-24 07:29:50.847] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:29:50.943] Loaded PowerVR consumer services. [2025-09-24 07:29:51.087] 512+0 records in [2025-09-24 07:29:51.087] 512+0 records out [2025-09-24 07:29:51.087] Waiting data available... [2025-09-24 07:29:51.134] Starting syslogd/klogd: done [2025-09-24 07:29:51.150] DML Start [2025-09-24 07:29:51.343] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:29:51.567] DML res1: 0 [2025-09-24 07:29:51.977] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:29:51.977] Read Success [2025-09-24 07:29:51.977] Verifying certificate... [2025-09-24 07:29:52.250] Verified OK [2025-09-24 07:29:52.265] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:29:53.895] Verified OK [2025-09-24 07:29:53.895] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:29:54.519] Verified OK [2025-09-24 07:29:54.535] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:29:57.204] fs.protected_hardlinks = 1 [2025-09-24 07:29:57.204] fs.protected_symlinks = 1 [2025-09-24 07:29:57.220] kernel.modules_disabled = 1 [2025-09-24 07:29:57.412] [2025-09-24 07:29:57.412] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:29:58.643] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:30:06.370] SBL1:1210.0.1.0 [2025-09-24 07:30:06.417] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:30:07.985] SBL2:1210.0.1.0 [2025-09-24 07:30:08.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:30:08.129] j-A [2025-09-24 07:30:15.504] The R5 Autosar Classic is running [2025-09-24 07:30:15.504] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:30:15.504] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:30:16.112] INIT: version 2.96 booting [2025-09-24 07:30:16.223] INIT: Entering runlevel: 5 [2025-09-24 07:30:16.368] mtd24 attached [2025-09-24 07:30:16.384] mtd28 attached [2025-09-24 07:30:16.400] mtd32 attached [2025-09-24 07:30:16.448] ubi0:textures is mounted. [2025-09-24 07:30:16.448] ubi1:animations is mounted. [2025-09-24 07:30:16.509] RTNETLINK answers: File exists [2025-09-24 07:30:16.509] ubi2:dml_code is mounted. [2025-09-24 07:30:16.509] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:30:16.509] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:30:16.509] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:30:16.509] data.LB_FadeInType0=100 [2025-09-24 07:30:16.509] data.CHLH_FadeInType0=0 [2025-09-24 07:30:16.509] data.WU_FadeInDelay=0 [2025-09-24 07:30:16.509] max_time_out=0 [2025-09-24 07:30:16.509] No splash screen [2025-09-24 07:30:16.509] stop dss Done [2025-09-24 07:30:16.509] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:30:16.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:30:16.581] /dev/mem opened. [2025-09-24 07:30:16.581] Memory mapped at address 0xffffba8d8000. [2025-09-24 07:30:16.581] Read at address 0x00600018 (0xffffba8d8018): 0x00000000 [2025-09-24 07:30:16.581] Write at address 0x00600018 (0xffffba8d8018): 0x00400040, readback 0x00400040 [2025-09-24 07:30:16.613] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:30:16.629] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:30:16.788] Loaded PowerVR consumer services. [2025-09-24 07:30:16.820] 512+0 records in [2025-09-24 07:30:16.820] 512+0 records out [2025-09-24 07:30:16.868] Starting syslogd/klogd: done [2025-09-24 07:30:16.884] Waiting data available... [2025-09-24 07:30:16.900] DML Start [2025-09-24 07:30:17.076] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:30:17.300] DML res1: 0 [2025-09-24 07:30:17.739] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:30:17.739] Read Success [2025-09-24 07:30:17.739] Verifying certificate... [2025-09-24 07:30:17.995] Verified OK [2025-09-24 07:30:18.011] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:30:19.658] Verified OK [2025-09-24 07:30:19.658] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:30:20.260] Verified OK [2025-09-24 07:30:20.260] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:30:22.850] fs.protected_hardlinks = 1 [2025-09-24 07:30:22.850] fs.protected_symlinks = 1 [2025-09-24 07:30:22.866] kernel.modules_disabled = 1 [2025-09-24 07:30:23.057] [2025-09-24 07:30:23.057] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:30:24.375] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:30:32.108] SBL1:1210.0.1.0 [2025-09-24 07:30:32.140] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:30:33.723] SBL2:1210.0.1.0 [2025-09-24 07:30:33.755] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:30:33.867] j-A [2025-09-24 07:30:41.206] The R5 Autosar Classic is running [2025-09-24 07:30:41.237] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:30:41.237] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:30:41.844] INIT: version 2.96 booting [2025-09-24 07:30:41.956] INIT: Entering runlevel: 5 [2025-09-24 07:30:42.116] mtd24 attached [2025-09-24 07:30:42.116] mtd28 attached [2025-09-24 07:30:42.132] mtd32 attached [2025-09-24 07:30:42.164] ubi0:textures is mounted. [2025-09-24 07:30:42.180] ubi1:animations is mounted. [2025-09-24 07:30:42.244] RTNETLINK answers: File exists [2025-09-24 07:30:42.244] ubi2:dml_code is mounted. [2025-09-24 07:30:42.244] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:30:42.244] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:30:42.244] data.LB_FadeInType0=100 [2025-09-24 07:30:42.244] data.CHLH_FadeInType0=0 [2025-09-24 07:30:42.244] data.WU_FadeInDelay=0 [2025-09-24 07:30:42.244] max_time_out=0 [2025-09-24 07:30:42.244] No splash screen [2025-09-24 07:30:42.244] stop dss Done [2025-09-24 07:30:42.244] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:30:42.244] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:30:42.244] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:30:42.300] /dev/mem opened. [2025-09-24 07:30:42.300] Memory mapped at address 0xffffa4362000. [2025-09-24 07:30:42.300] Read at address 0x00600018 (0xffffa4362018): 0x00000000 [2025-09-24 07:30:42.300] Write at address 0x00600018 (0xffffa4362018): 0x00400040, readback 0x00400040 [2025-09-24 07:30:42.300] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:30:42.316] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:30:42.428] Loaded PowerVR consumer services. [2025-09-24 07:30:42.583] Waiting data available... [2025-09-24 07:30:42.583] 512+0 records in [2025-09-24 07:30:42.583] 512+0 records out [2025-09-24 07:30:42.614] Starting syslogd/klogd: done [2025-09-24 07:30:42.630] DML Start [2025-09-24 07:30:42.822] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:30:43.062] DML res1: 0 [2025-09-24 07:30:43.478] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:30:43.494] Read Success [2025-09-24 07:30:43.494] Verifying certificate... [2025-09-24 07:30:43.718] Verified OK [2025-09-24 07:30:43.734] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:30:45.541] Verified OK [2025-09-24 07:30:45.541] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:30:46.098] Verified OK [2025-09-24 07:30:46.098] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:30:48.655] fs.protected_hardlinks = 1 [2025-09-24 07:30:48.686] fs.protected_symlinks = 1 [2025-09-24 07:30:48.686] kernel.modules_disabled = 1 [2025-09-24 07:30:48.863] [2025-09-24 07:30:48.863] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:30:50.120] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:30:57.844] SBL1:1210.0.1.0 [2025-09-24 07:30:57.892] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 07:30:59.459] SBL2:1210.0.1.0 [2025-09-24 07:30:59.506] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:30:59.603] j-A [2025-09-24 07:31:06.957] The R5 Autosar Classic is running [2025-09-24 07:31:06.982] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:31:06.982] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:31:07.590] INIT: version 2.96 booting [2025-09-24 07:31:07.703] INIT: Entering runlevel: 5 [2025-09-24 07:31:07.846] mtd24 attached [2025-09-24 07:31:07.862] mtd28 attached [2025-09-24 07:31:07.878] mtd32 attached [2025-09-24 07:31:07.910] ubi0:textures is mounted. [2025-09-24 07:31:07.926] RTNETLINK answers: File exists [2025-09-24 07:31:07.981] ubi2:dml_code is mounted. [2025-09-24 07:31:07.981] ubi1:animations is mounted. [2025-09-24 07:31:07.981] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:31:07.981] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:31:07.981] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:31:07.981] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:31:07.981] data.LB_FadeInType0=100 [2025-09-24 07:31:07.981] data.CHLH_FadeInType0=0 [2025-09-24 07:31:07.981] data.WU_FadeInDelay=0 [2025-09-24 07:31:07.981] max_time_out=0 [2025-09-24 07:31:07.981] No splash screen [2025-09-24 07:31:07.981] stop dss Done [2025-09-24 07:31:07.981] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:31:08.029] /dev/mem opened. [2025-09-24 07:31:08.073] Memory mapped at address 0xffff9ed1f000. [2025-09-24 07:31:08.073] Read at address 0x00600018 (0xffff9ed1f018): 0x00000000 [2025-09-24 07:31:08.073] Write at address 0x00600018 (0xffff9ed1f018): 0x00400040, readback 0x00400040 [2025-09-24 07:31:08.073] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:31:08.073] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:31:08.185] Loaded PowerVR consumer services. [2025-09-24 07:31:08.326] Waiting data available... [2025-09-24 07:31:08.326] 512+0 records in [2025-09-24 07:31:08.326] 512+0 records out [2025-09-24 07:31:08.342] Starting syslogd/klogd: done [2025-09-24 07:31:08.358] DML Start [2025-09-24 07:31:08.550] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:31:08.774] DML res1: 0 [2025-09-24 07:31:09.212] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:31:09.212] Read Success [2025-09-24 07:31:09.212] Verifying certificate... [2025-09-24 07:31:09.452] Verified OK [2025-09-24 07:31:09.468] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:31:11.097] Verified OK [2025-09-24 07:31:11.097] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:31:11.737] Verified OK [2025-09-24 07:31:11.737] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:31:14.423] fs.protected_hardlinks = 1 [2025-09-24 07:31:14.423] fs.protected_symlinks = 1 [2025-09-24 07:31:14.438] kernel.modules_disabled = 1 [2025-09-24 07:31:14.631] [2025-09-24 07:31:14.631] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:31:15.853] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:31:23.584] SBL1:1210.0.1.0 [2025-09-24 07:31:23.632] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:31:25.198] SBL2:1210.0.1.0 [2025-09-24 07:31:25.230] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:31:25.342] j-A [2025-09-24 07:31:32.697] The R5 Autosar Classic is running [2025-09-24 07:31:32.697] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:31:32.718] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:31:33.325] INIT: version 2.96 booting [2025-09-24 07:31:33.437] INIT: Entering runlevel: 5 [2025-09-24 07:31:33.580] mtd28 attached [2025-09-24 07:31:33.596] mtd24 attached [2025-09-24 07:31:33.612] mtd32 attached [2025-09-24 07:31:33.660] RTNETLINK answers: File exists [2025-09-24 07:31:33.722] ubi0:animations is mounted. [2025-09-24 07:31:33.722] ubi1:textures is mounted. [2025-09-24 07:31:33.722] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:31:33.722] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:31:33.722] ubi2:dml_code is mounted. [2025-09-24 07:31:33.722] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:31:33.722] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:31:33.722] data.LB_FadeInType0=100 [2025-09-24 07:31:33.722] data.CHLH_FadeInType0=0 [2025-09-24 07:31:33.722] data.WU_FadeInDelay=0 [2025-09-24 07:31:33.722] max_time_out=0 [2025-09-24 07:31:33.722] No splash screen [2025-09-24 07:31:33.722] stop dss Done [2025-09-24 07:31:33.722] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:31:33.770] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:31:33.770] /dev/mem opened. [2025-09-24 07:31:33.770] Memory mapped at address 0xffffb771d000. [2025-09-24 07:31:33.802] Read at address 0x00600018 (0xffffb771d018): 0x00000000 [2025-09-24 07:31:33.802] Write at address 0x00600018 (0xffffb771d018): 0x00400040, readback 0x00400040 [2025-09-24 07:31:33.802] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:31:33.913] Loaded PowerVR consumer services. [2025-09-24 07:31:34.042] Waiting data available... [2025-09-24 07:31:34.058] 512+0 records in [2025-09-24 07:31:34.058] 512+0 records out [2025-09-24 07:31:34.106] Starting syslogd/klogd: done [2025-09-24 07:31:34.122] DML Start [2025-09-24 07:31:34.297] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:31:34.521] DML res1: 0 [2025-09-24 07:31:34.968] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:31:34.968] Read Success [2025-09-24 07:31:34.968] Verifying certificate... [2025-09-24 07:31:35.192] Verified OK [2025-09-24 07:31:35.207] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:31:37.026] Verified OK [2025-09-24 07:31:37.026] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:31:37.511] Verified OK [2025-09-24 07:31:37.511] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:31:39.989] fs.protected_hardlinks = 1 [2025-09-24 07:31:40.005] fs.protected_symlinks = 1 [2025-09-24 07:31:40.021] kernel.modules_disabled = 1 [2025-09-24 07:31:40.214] [2025-09-24 07:31:40.214] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:31:41.620] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:31:49.291] SBL1:1210.0.1.0 [2025-09-24 07:31:49.339] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:31:50.905] SBL2:1210.0.1.0 [2025-09-24 07:31:50.953] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:31:51.049] j-A [2025-09-24 07:31:58.403] The R5 Autosar Classic is running [2025-09-24 07:31:58.427] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:31:58.427] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:31:59.035] INIT: version 2.96 booting [2025-09-24 07:31:59.147] INIT: Entering runlevel: 5 [2025-09-24 07:31:59.307] mtd28 attached [2025-09-24 07:31:59.307] mtd24 attached [2025-09-24 07:31:59.323] mtd32 attached [2025-09-24 07:31:59.372] ubi0:animations is mounted. [2025-09-24 07:31:59.372] RTNETLINK answers: File exists [2025-09-24 07:31:59.427] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:31:59.427] ubi1:textures is mounted. [2025-09-24 07:31:59.427] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:31:59.427] ubi2:dml_code is mounted. [2025-09-24 07:31:59.427] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:31:59.427] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:31:59.427] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:31:59.427] data.LB_FadeInType0=100 [2025-09-24 07:31:59.427] data.CHLH_FadeInType0=0 [2025-09-24 07:31:59.427] data.WU_FadeInDelay=0 [2025-09-24 07:31:59.427] max_time_out=0 [2025-09-24 07:31:59.427] No splash screen [2025-09-24 07:31:59.427] stop dss Done [2025-09-24 07:31:59.503] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:31:59.503] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:31:59.503] /dev/mem opened. [2025-09-24 07:31:59.503] Memory mapped at address 0xffff85e5a000. [2025-09-24 07:31:59.503] Read at address 0x00600018 (0xffff85e5a018): 0x00000000 [2025-09-24 07:31:59.503] Write at address 0x00600018 (0xffff85e5a018): 0x00400040, readback 0x00400040 [2025-09-24 07:31:59.599] Loaded PowerVR consumer services. [2025-09-24 07:31:59.765] 512+0 records in [2025-09-24 07:31:59.765] 512+0 records out [2025-09-24 07:31:59.765] Waiting data available... [2025-09-24 07:31:59.797] Starting syslogd/klogd: done [2025-09-24 07:31:59.813] DML Start [2025-09-24 07:32:00.021] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:32:00.245] DML res1: 0 [2025-09-24 07:32:00.651] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:32:00.651] Read Success [2025-09-24 07:32:00.651] Verifying certificate... [2025-09-24 07:32:00.890] Verified OK [2025-09-24 07:32:00.906] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:32:02.543] Verified OK [2025-09-24 07:32:02.543] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:32:03.157] Verified OK [2025-09-24 07:32:03.157] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:32:05.876] fs.protected_hardlinks = 1 [2025-09-24 07:32:05.892] fs.protected_symlinks = 1 [2025-09-24 07:32:05.892] kernel.modules_disabled = 1 [2025-09-24 07:32:06.100] [2025-09-24 07:32:06.100] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:32:07.312] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:32:15.030] SBL1:1210.0.1.0 [2025-09-24 07:32:15.062] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:32:16.645] SBL2:1210.0.1.0 [2025-09-24 07:32:16.676] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:32:16.788] j-A [2025-09-24 07:32:24.126] The R5 Autosar Classic is running [2025-09-24 07:32:24.157] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:32:24.157] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:32:24.764] INIT: version 2.96 booting [2025-09-24 07:32:24.877] INIT: Entering runlevel: 5 [2025-09-24 07:32:25.021] mtd28 attached [2025-09-24 07:32:25.037] mtd24 attached [2025-09-24 07:32:25.053] mtd32 attached [2025-09-24 07:32:25.085] ubi0:animations is mounted. [2025-09-24 07:32:25.101] RTNETLINK answers: File exists [2025-09-24 07:32:25.101] ubi1:textures is mounted. [2025-09-24 07:32:25.159] ubi2:dml_code is mounted. [2025-09-24 07:32:25.159] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:32:25.159] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:32:25.159] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:32:25.159] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:32:25.159] data.LB_FadeInType0=100 [2025-09-24 07:32:25.159] data.CHLH_FadeInType0=0 [2025-09-24 07:32:25.159] data.WU_FadeInDelay=0 [2025-09-24 07:32:25.159] max_time_out=0 [2025-09-24 07:32:25.159] No splash screen [2025-09-24 07:32:25.159] stop dss Done [2025-09-24 07:32:25.159] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:32:25.191] /dev/mem opened. [2025-09-24 07:32:25.191] Memory mapped at address 0xffff8d249000. [2025-09-24 07:32:25.223] Read at address 0x00600018 (0xffff8d249018): 0x00000000 [2025-09-24 07:32:25.223] Write at address 0x00600018 (0xffff8d249018): 0x00400040, readback 0x00400040 [2025-09-24 07:32:25.223] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:32:25.223] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:32:25.335] Loaded PowerVR consumer services. [2025-09-24 07:32:25.479] Waiting data available... [2025-09-24 07:32:25.495] 512+0 records in [2025-09-24 07:32:25.495] 512+0 records out [2025-09-24 07:32:25.542] Starting syslogd/klogd: done [2025-09-24 07:32:25.558] DML Start [2025-09-24 07:32:25.735] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:32:25.942] DML res1: 0 [2025-09-24 07:32:26.390] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:32:26.411] Read Success [2025-09-24 07:32:26.411] Verifying certificate... [2025-09-24 07:32:26.651] Verified OK [2025-09-24 07:32:26.667] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:32:28.186] Verified OK [2025-09-24 07:32:28.186] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:32:28.778] Verified OK [2025-09-24 07:32:28.778] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:32:31.496] fs.protected_hardlinks = 1 [2025-09-24 07:32:31.496] fs.protected_symlinks = 1 [2025-09-24 07:32:31.512] kernel.modules_disabled = 1 [2025-09-24 07:32:31.687] [2025-09-24 07:32:31.687] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:32:33.021] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:32:40.749] SBL1:1210.0.1.0 [2025-09-24 07:32:40.797] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:32:42.364] SBL2:1210.0.1.0 [2025-09-24 07:32:42.396] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:32:42.507] j-A [2025-09-24 07:32:49.882] The R5 Autosar Classic is running [2025-09-24 07:32:49.882] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:32:49.882] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:32:50.490] INIT: version 2.96 booting [2025-09-24 07:32:50.585] INIT: Entering runlevel: 5 [2025-09-24 07:32:50.745] mtd24 attached [2025-09-24 07:32:50.745] mtd28 attached [2025-09-24 07:32:50.777] mtd32 attached [2025-09-24 07:32:50.777] ubi0:textures is mounted. [2025-09-24 07:32:50.809] RTNETLINK answers: File exists [2025-09-24 07:32:50.875] ubi1:animations is mounted. [2025-09-24 07:32:50.875] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:32:50.875] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:32:50.875] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:32:50.875] ubi2:dml_code is mounted. [2025-09-24 07:32:50.875] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:32:50.875] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:32:50.875] data.LB_FadeInType0=100 [2025-09-24 07:32:50.875] data.CHLH_FadeInType0=0 [2025-09-24 07:32:50.875] data.WU_FadeInDelay=0 [2025-09-24 07:32:50.875] max_time_out=0 [2025-09-24 07:32:50.875] No splash screen [2025-09-24 07:32:50.875] stop dss Done [2025-09-24 07:32:50.942] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:32:50.942] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:32:50.942] /dev/mem opened. [2025-09-24 07:32:50.942] Memory mapped at address 0xffff939b6000. [2025-09-24 07:32:50.942] Read at address 0x00600018 (0xffff939b6018): 0x00000000 [2025-09-24 07:32:50.942] Write at address 0x00600018 (0xffff939b6018): 0x00400040, readback 0x00400040 [2025-09-24 07:32:51.054] Loaded PowerVR consumer services. [2025-09-24 07:32:51.211] Waiting data available... [2025-09-24 07:32:51.211] 512+0 records in [2025-09-24 07:32:51.211] 512+0 records out [2025-09-24 07:32:51.227] Starting syslogd/klogd: done [2025-09-24 07:32:51.243] DML Start [2025-09-24 07:32:51.402] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:32:51.627] DML res1: 0 [2025-09-24 07:32:52.134] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:32:52.134] Read Success [2025-09-24 07:32:52.134] Verifying certificate... [2025-09-24 07:32:52.358] Verified OK [2025-09-24 07:32:52.374] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:32:54.085] Verified OK [2025-09-24 07:32:54.085] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:32:54.674] Verified OK [2025-09-24 07:32:54.674] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:32:57.200] fs.protected_hardlinks = 1 [2025-09-24 07:32:57.216] fs.protected_symlinks = 1 [2025-09-24 07:32:57.216] kernel.modules_disabled = 1 [2025-09-24 07:32:57.408] [2025-09-24 07:32:57.408] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:32:58.767] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:33:06.474] SBL1:1210.0.1.0 [2025-09-24 07:33:06.522] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:33:08.089] SBL2:1210.0.1.0 [2025-09-24 07:33:08.137] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:33:08.233] j-A [2025-09-24 07:33:15.587] The R5 Autosar Classic is running [2025-09-24 07:33:15.611] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:33:15.611] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:33:16.218] INIT: version 2.96 booting [2025-09-24 07:33:16.330] INIT: Entering runlevel: 5 [2025-09-24 07:33:16.473] mtd24 attached [2025-09-24 07:33:16.489] mtd32 attached [2025-09-24 07:33:16.505] mtd28 attached [2025-09-24 07:33:16.537] ubi0:textures is mounted. [2025-09-24 07:33:16.554] ubi1:dml_code is mounted. [2025-09-24 07:33:16.570] ubi2:animations is mounted. [2025-09-24 07:33:16.570] RTNETLINK answers: File exists [2025-09-24 07:33:16.625] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:33:16.625] data.LB_FadeInType0=100 [2025-09-24 07:33:16.625] data.CHLH_FadeInType0=0 [2025-09-24 07:33:16.625] data.WU_FadeInDelay=0 [2025-09-24 07:33:16.625] max_time_out=0 [2025-09-24 07:33:16.625] No splash screen [2025-09-24 07:33:16.625] stop dss Done [2025-09-24 07:33:16.625] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:33:16.625] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:33:16.625] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:33:16.625] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:33:16.676] /dev/mem opened. [2025-09-24 07:33:16.676] Memory mapped at address 0xffffae47d000. [2025-09-24 07:33:16.676] Read at address 0x00600018 (0xffffae47d018): 0x00000000 [2025-09-24 07:33:16.676] Write at address 0x00600018 (0xffffae47d018): 0x00400040, readback 0x00400040 [2025-09-24 07:33:16.715] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:33:16.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:33:16.779] Loaded PowerVR consumer services. [2025-09-24 07:33:16.923] Waiting data available... [2025-09-24 07:33:16.923] 512+0 records in [2025-09-24 07:33:16.923] 512+0 records out [2025-09-24 07:33:16.955] Starting syslogd/klogd: done [2025-09-24 07:33:16.971] DML Start [2025-09-24 07:33:17.147] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:33:17.355] DML res1: 0 [2025-09-24 07:33:17.875] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:33:17.875] Read Success [2025-09-24 07:33:17.875] Verifying certificate... [2025-09-24 07:33:18.147] Verified OK [2025-09-24 07:33:18.147] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:33:19.858] Verified OK [2025-09-24 07:33:19.858] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:33:20.401] Verified OK [2025-09-24 07:33:20.401] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:33:22.863] fs.protected_hardlinks = 1 [2025-09-24 07:33:22.879] fs.protected_symlinks = 1 [2025-09-24 07:33:22.879] kernel.modules_disabled = 1 [2025-09-24 07:33:23.072] [2025-09-24 07:33:23.072] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:33:24.447] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:33:32.205] SBL1:1210.0.1.0 [2025-09-24 07:33:32.237] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:33:33.819] SBL2:1210.0.1.0 [2025-09-24 07:33:33.851] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:33:33.963] j-A [2025-09-24 07:33:41.333] The R5 Autosar Classic is running [2025-09-24 07:33:41.333] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:33:41.333] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:33:41.941] INIT: version 2.96 booting [2025-09-24 07:33:42.036] INIT: Entering runlevel: 5 [2025-09-24 07:33:42.197] mtd28 attached [2025-09-24 07:33:42.213] mtd24 attached [2025-09-24 07:33:42.229] mtd32 attached [2025-09-24 07:33:42.245] ubi0:animations is mounted. [2025-09-24 07:33:42.261] ubi1:textures is mounted. [2025-09-24 07:33:42.276] RTNETLINK answers: File exists [2025-09-24 07:33:42.333] ubi2:dml_code is mounted. [2025-09-24 07:33:42.333] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:33:42.333] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:33:42.333] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:33:42.333] data.LB_FadeInType0=100 [2025-09-24 07:33:42.333] data.CHLH_FadeInType0=0 [2025-09-24 07:33:42.333] data.WU_FadeInDelay=0 [2025-09-24 07:33:42.333] max_time_out=0 [2025-09-24 07:33:42.333] No splash screen [2025-09-24 07:33:42.333] stop dss Done [2025-09-24 07:33:42.333] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:33:42.333] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:33:42.364] /dev/mem opened. [2025-09-24 07:33:42.364] Memory mapped at address 0xffff897ad000. [2025-09-24 07:33:42.390] Read at address 0x00600018 (0xffff897ad018): 0x00000000 [2025-09-24 07:33:42.390] Write at address 0x00600018 (0xffff897ad018): 0x00400040, readback 0x00400040 [2025-09-24 07:33:42.438] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:33:42.468] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:33:42.660] Loaded PowerVR consumer services. [2025-09-24 07:33:42.676] Waiting data available... [2025-09-24 07:33:42.692] 512+0 records in [2025-09-24 07:33:42.692] 512+0 records out [2025-09-24 07:33:42.740] Starting syslogd/klogd: done [2025-09-24 07:33:42.756] DML Start [2025-09-24 07:33:42.947] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:33:43.172] DML res1: 0 [2025-09-24 07:33:43.588] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:33:43.609] Read Success [2025-09-24 07:33:43.609] Verifying certificate... [2025-09-24 07:33:43.849] Verified OK [2025-09-24 07:33:43.865] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:33:45.496] Verified OK [2025-09-24 07:33:45.496] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:33:46.141] Verified OK [2025-09-24 07:33:46.141] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:33:48.763] fs.protected_hardlinks = 1 [2025-09-24 07:33:48.763] fs.protected_symlinks = 1 [2025-09-24 07:33:48.779] kernel.modules_disabled = 1 [2025-09-24 07:33:48.971] [2025-09-24 07:33:48.971] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:33:50.232] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:33:57.933] SBL1:1210.0.1.0 [2025-09-24 07:33:57.981] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:33:59.548] SBL2:1210.0.1.0 [2025-09-24 07:33:59.596] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:33:59.691] j-A [2025-09-24 07:34:07.047] The R5 Autosar Classic is running [2025-09-24 07:34:07.069] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:34:07.069] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:34:07.676] INIT: version 2.96 booting [2025-09-24 07:34:07.787] INIT: Entering runlevel: 5 [2025-09-24 07:34:07.948] mtd32 attached [2025-09-24 07:34:07.948] mtd28 attached [2025-09-24 07:34:07.964] mtd24 attached [2025-09-24 07:34:08.012] RTNETLINK answers: File exists [2025-09-24 07:34:08.055] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:34:08.055] ubi1:animations is mounted. [2025-09-24 07:34:08.055] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:34:08.055] ubi0:dml_code is mounted. [2025-09-24 07:34:08.055] ubi2:textures is mounted. [2025-09-24 07:34:08.055] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:34:08.055] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:34:08.055] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:34:08.055] data.LB_FadeInType0=100 [2025-09-24 07:34:08.076] data.CHLH_FadeInType0=0 [2025-09-24 07:34:08.076] data.WU_FadeInDelay=0 [2025-09-24 07:34:08.076] max_time_out=0 [2025-09-24 07:34:08.076] No splash screen [2025-09-24 07:34:08.076] stop dss Done [2025-09-24 07:34:08.108] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:34:08.124] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:34:08.157] /dev/mem opened. [2025-09-24 07:34:08.157] Memory mapped at address 0xffff94914000. [2025-09-24 07:34:08.157] Read at address 0x00600018 (0xffff94914018): 0x00000000 [2025-09-24 07:34:08.157] Write at address 0x00600018 (0xffff94914018): 0x00400040, readback 0x00400040 [2025-09-24 07:34:08.349] Loaded PowerVR consumer services. [2025-09-24 07:34:08.397] 512+0 records in [2025-09-24 07:34:08.397] 512+0 records out [2025-09-24 07:34:08.429] Waiting data available... [2025-09-24 07:34:08.445] Starting syslogd/klogd: done [2025-09-24 07:34:08.478] DML Start [2025-09-24 07:34:08.637] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:34:08.861] DML res1: 0 [2025-09-24 07:34:09.316] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:34:09.316] Read Success [2025-09-24 07:34:09.316] Verifying certificate... [2025-09-24 07:34:09.571] Verified OK [2025-09-24 07:34:09.587] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:34:11.276] Verified OK [2025-09-24 07:34:11.276] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:34:11.866] Verified OK [2025-09-24 07:34:11.866] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:34:14.392] fs.protected_hardlinks = 1 [2025-09-24 07:34:14.408] fs.protected_symlinks = 1 [2025-09-24 07:34:14.408] kernel.modules_disabled = 1 [2025-09-24 07:34:14.584] [2025-09-24 07:34:14.584] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:34:15.904] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:34:23.656] SBL1:1210.0.1.0 [2025-09-24 07:34:23.704] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:34:25.287] SBL2:1210.0.1.0 [2025-09-24 07:34:25.318] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 07:34:25.431] j-A [2025-09-24 07:34:32.769] The R5 Autosar Classic is running [2025-09-24 07:34:32.795] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:34:32.795] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:34:33.402] INIT: version 2.96 booting [2025-09-24 07:34:33.514] INIT: Entering runlevel: 5 [2025-09-24 07:34:33.674] mtd24 attached [2025-09-24 07:34:33.690] mtd32 attached [2025-09-24 07:34:33.706] mtd28 attached [2025-09-24 07:34:33.722] ubi0:textures is mounted. [2025-09-24 07:34:33.722] ubi1:dml_code is mounted. [2025-09-24 07:34:33.803] RTNETLINK answers: File exists [2025-09-24 07:34:33.803] ubi2:animations is mounted. [2025-09-24 07:34:33.803] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:34:33.803] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:34:33.803] data.LB_FadeInType0=100 [2025-09-24 07:34:33.803] data.CHLH_FadeInType0=0 [2025-09-24 07:34:33.803] data.WU_FadeInDelay=0 [2025-09-24 07:34:33.803] max_time_out=0 [2025-09-24 07:34:33.803] No splash screen [2025-09-24 07:34:33.803] stop dss Done [2025-09-24 07:34:33.803] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:34:33.803] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:34:33.803] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:34:33.867] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:34:33.867] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:34:33.867] /dev/mem opened. [2025-09-24 07:34:33.867] Memory mapped at address 0xffff8e829000. [2025-09-24 07:34:33.867] Read at address 0x00600018 (0xffff8e829018): 0x00000000 [2025-09-24 07:34:33.867] Write at address 0x00600018 (0xffff8e829018): 0x00400040, readback 0x00400040 [2025-09-24 07:34:34.043] Loaded PowerVR consumer services. [2025-09-24 07:34:34.139] Waiting data available... [2025-09-24 07:34:34.155] 512+0 records in [2025-09-24 07:34:34.155] 512+0 records out [2025-09-24 07:34:34.202] Starting syslogd/klogd: done [2025-09-24 07:34:34.218] DML Start [2025-09-24 07:34:34.394] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:34:34.634] DML res1: 0 [2025-09-24 07:34:35.077] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:34:35.077] Read Success [2025-09-24 07:34:35.077] Verifying certificate... [2025-09-24 07:34:35.348] Verified OK [2025-09-24 07:34:35.364] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:34:37.048] Verified OK [2025-09-24 07:34:37.048] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:34:37.540] Verified OK [2025-09-24 07:34:37.540] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:34:39.955] fs.protected_hardlinks = 1 [2025-09-24 07:34:39.955] fs.protected_symlinks = 1 [2025-09-24 07:34:39.971] kernel.modules_disabled = 1 [2025-09-24 07:34:40.179] [2025-09-24 07:34:40.179] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:34:41.730] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:34:49.403] SBL1:1210.0.1.0 [2025-09-24 07:34:49.435] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:34:51.019] SBL2:1210.0.1.0 [2025-09-24 07:34:51.050] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:34:51.163] j-A [2025-09-24 07:34:58.537] The R5 Autosar Classic is running [2025-09-24 07:34:58.537] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:34:58.537] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:34:59.145] INIT: version 2.96 booting [2025-09-24 07:34:59.257] INIT: Entering runlevel: 5 [2025-09-24 07:34:59.400] mtd24 attached [2025-09-24 07:34:59.416] mtd32 attached [2025-09-24 07:34:59.432] mtd28 attached [2025-09-24 07:34:59.464] ubi0:textures is mounted. [2025-09-24 07:34:59.480] RTNETLINK answers: File exists [2025-09-24 07:34:59.480] ubi2:animations is mounted. [2025-09-24 07:34:59.535] ubi1:dml_code is mounted. [2025-09-24 07:34:59.535] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:34:59.535] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:34:59.535] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:34:59.535] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:34:59.535] data.LB_FadeInType0=100 [2025-09-24 07:34:59.535] data.CHLH_FadeInType0=0 [2025-09-24 07:34:59.535] data.WU_FadeInDelay=0 [2025-09-24 07:34:59.535] max_time_out=0 [2025-09-24 07:34:59.535] No splash screen [2025-09-24 07:34:59.535] stop dss Done [2025-09-24 07:34:59.535] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:34:59.603] /dev/mem opened. [2025-09-24 07:34:59.603] Memory mapped at address 0xffff8bf28000. [2025-09-24 07:34:59.603] Read at address 0x00600018 (0xffff8bf28018): 0x00000000 [2025-09-24 07:34:59.603] Write at address 0x00600018 (0xffff8bf28018): 0x00400040, readback 0x00400040 [2025-09-24 07:34:59.642] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:34:59.642] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:34:59.818] Loaded PowerVR consumer services. [2025-09-24 07:34:59.866] 512+0 records in [2025-09-24 07:34:59.882] 512+0 records out [2025-09-24 07:34:59.882] Waiting data available... [2025-09-24 07:34:59.914] Starting syslogd/klogd: done [2025-09-24 07:34:59.930] DML Start [2025-09-24 07:35:00.122] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:35:00.297] DML res1: 0 [2025-09-24 07:35:00.784] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:35:00.784] Read Success [2025-09-24 07:35:00.785] Verifying certificate... [2025-09-24 07:35:01.088] Verified OK [2025-09-24 07:35:01.104] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:35:02.895] Verified OK [2025-09-24 07:35:02.895] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:35:03.436] Verified OK [2025-09-24 07:35:03.436] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:35:05.882] fs.protected_hardlinks = 1 [2025-09-24 07:35:05.882] fs.protected_symlinks = 1 [2025-09-24 07:35:05.898] kernel.modules_disabled = 1 [2025-09-24 07:35:06.090] [2025-09-24 07:35:06.090] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:35:07.416] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:35:15.114] SBL1:1210.0.1.0 [2025-09-24 07:35:15.146] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:35:16.728] SBL2:1210.0.1.0 [2025-09-24 07:35:16.760] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:35:16.873] j-A [2025-09-24 07:35:24.212] The R5 Autosar Classic is running [2025-09-24 07:35:24.243] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:35:24.243] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:35:24.850] INIT: version 2.96 booting [2025-09-24 07:35:24.963] INIT: Entering runlevel: 5 [2025-09-24 07:35:25.122] mtd32 attached [2025-09-24 07:35:25.138] mtd28 attached [2025-09-24 07:35:25.138] mtd24 attached [2025-09-24 07:35:25.186] ubi0:dml_code is mounted. [2025-09-24 07:35:25.236] RTNETLINK answers: File exists [2025-09-24 07:35:25.236] ubi1:animations is mounted. [2025-09-24 07:35:25.236] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:35:25.236] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:35:25.236] ubi2:textures is mounted. [2025-09-24 07:35:25.236] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:35:25.236] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:35:25.236] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:35:25.236] data.LB_FadeInType0=100 [2025-09-24 07:35:25.257] data.CHLH_FadeInType0=0 [2025-09-24 07:35:25.257] data.WU_FadeInDelay=0 [2025-09-24 07:35:25.257] max_time_out=0 [2025-09-24 07:35:25.257] No splash screen [2025-09-24 07:35:25.257] stop dss Done [2025-09-24 07:35:25.335] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:35:25.335] /dev/mem opened. [2025-09-24 07:35:25.335] Memory mapped at address 0xffff90199000. [2025-09-24 07:35:25.335] Read at address 0x00600018 (0xffff90199018): 0x00000000 [2025-09-24 07:35:25.335] Write at address 0x00600018 (0xffff90199018): 0x00400040, readback 0x00400040 [2025-09-24 07:35:25.335] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:35:25.559] Loaded PowerVR consumer services. [2025-09-24 07:35:25.575] Waiting data available... [2025-09-24 07:35:25.591] 512+0 records in [2025-09-24 07:35:25.607] 512+0 records out [2025-09-24 07:35:25.639] Starting syslogd/klogd: done [2025-09-24 07:35:25.655] DML Start [2025-09-24 07:35:25.847] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:35:26.087] DML res1: 0 [2025-09-24 07:35:26.454] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:35:26.475] Read Success [2025-09-24 07:35:26.475] Verifying certificate... [2025-09-24 07:35:26.763] Verified OK [2025-09-24 07:35:26.779] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:35:28.489] Verified OK [2025-09-24 07:35:28.489] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:35:29.138] Verified OK [2025-09-24 07:35:29.138] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:35:31.696] fs.protected_hardlinks = 1 [2025-09-24 07:35:31.696] fs.protected_symlinks = 1 [2025-09-24 07:35:31.712] kernel.modules_disabled = 1 [2025-09-24 07:35:31.904] [2025-09-24 07:35:31.904] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:35:33.164] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:35:40.839] SBL1:1210.0.1.0 [2025-09-24 07:35:40.887] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:35:42.454] SBL2:1210.0.1.0 [2025-09-24 07:35:42.486] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:35:42.598] j-A [2025-09-24 07:35:49.953] The R5 Autosar Classic is running [2025-09-24 07:35:49.953] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:35:49.974] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:35:50.581] INIT: version 2.96 booting [2025-09-24 07:35:50.693] INIT: Entering runlevel: 5 [2025-09-24 07:35:50.853] mtd28 attached [2025-09-24 07:35:50.853] mtd24 attached [2025-09-24 07:35:50.901] mtd32 attached [2025-09-24 07:35:50.917] ubi0:animations is mounted. [2025-09-24 07:35:50.917] ubi1:textures is mounted. [2025-09-24 07:35:50.933] RTNETLINK answers: File exists [2025-09-24 07:35:50.933] ubi2:dml_code is mounted. [2025-09-24 07:35:50.984] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:35:50.984] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:35:50.984] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:35:50.984] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:35:50.984] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:35:50.984] data.LB_FadeInType0=100 [2025-09-24 07:35:50.984] data.CHLH_FadeInType0=0 [2025-09-24 07:35:50.984] data.WU_FadeInDelay=0 [2025-09-24 07:35:50.984] max_time_out=0 [2025-09-24 07:35:50.984] No splash screen [2025-09-24 07:35:50.984] stop dss Done [2025-09-24 07:35:51.016] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:35:51.032] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:35:51.068] /dev/mem opened. [2025-09-24 07:35:51.068] Memory mapped at address 0xffff91931000. [2025-09-24 07:35:51.068] Read at address 0x00600018 (0xffff91931018): 0x00000000 [2025-09-24 07:35:51.068] Write at address 0x00600018 (0xffff91931018): 0x00400040, readback 0x00400040 [2025-09-24 07:35:51.147] Loaded PowerVR consumer services. [2025-09-24 07:35:51.317] Waiting data available... [2025-09-24 07:35:51.317] 512+0 records in [2025-09-24 07:35:51.317] 512+0 records out [2025-09-24 07:35:51.349] Starting syslogd/klogd: done [2025-09-24 07:35:51.364] DML Start [2025-09-24 07:35:51.557] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:35:51.780] DML res1: 0 [2025-09-24 07:35:52.228] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:35:52.244] Read Success [2025-09-24 07:35:52.244] Verifying certificate... [2025-09-24 07:35:52.467] Verified OK [2025-09-24 07:35:52.483] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:35:54.179] Verified OK [2025-09-24 07:35:54.194] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:35:54.803] Verified OK [2025-09-24 07:35:54.803] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:35:57.440] fs.protected_hardlinks = 1 [2025-09-24 07:35:57.456] fs.protected_symlinks = 1 [2025-09-24 07:35:57.456] kernel.modules_disabled = 1 [2025-09-24 07:35:57.648] [2025-09-24 07:35:57.648] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:35:58.847] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:36:01.143] @SBL1:1210.0.1.0 [2025-09-24 07:36:06.593] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:36:08.176] SBL2:1210.0.1.0 [2025-09-24 07:36:08.208] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:36:08.320] j-A [2025-09-24 07:36:15.659] The R5 Autosar Classic is running [2025-09-24 07:36:15.690] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:36:15.690] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:36:16.298] INIT: version 2.96 booting [2025-09-24 07:36:16.409] INIT: Entering runlevel: 5 [2025-09-24 07:36:16.569] mtd32 attached [2025-09-24 07:36:16.569] mtd28 attached [2025-09-24 07:36:16.585] mtd24 attached [2025-09-24 07:36:16.633] RTNETLINK answers: File exists [2025-09-24 07:36:16.633] ubi0:dml_code is mounted. [2025-09-24 07:36:16.698] ubi2:textures is mounted. [2025-09-24 07:36:16.698] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:36:16.698] ubi1:animations is mounted. [2025-09-24 07:36:16.698] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:36:16.698] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:36:16.698] data.LB_FadeInType0=100 [2025-09-24 07:36:16.698] data.CHLH_FadeInType0=0 [2025-09-24 07:36:16.698] data.WU_FadeInDelay=0 [2025-09-24 07:36:16.698] max_time_out=0 [2025-09-24 07:36:16.698] No splash screen [2025-09-24 07:36:16.698] stop dss Done [2025-09-24 07:36:16.698] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:36:16.698] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:36:16.771] /dev/mem opened. [2025-09-24 07:36:16.771] Memory mapped at address 0xffffbf67e000. [2025-09-24 07:36:16.771] Read at address 0x00600018 (0xffffbf67e018): 0x00000000 [2025-09-24 07:36:16.771] Write at address 0x00600018 (0xffffbf67e018): 0x00400040, readback 0x00400040 [2025-09-24 07:36:16.771] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:36:16.787] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:36:16.852] Loaded PowerVR consumer services. [2025-09-24 07:36:17.012] Waiting data available... [2025-09-24 07:36:17.028] 512+0 records in [2025-09-24 07:36:17.028] 512+0 records out [2025-09-24 07:36:17.075] Starting syslogd/klogd: done [2025-09-24 07:36:17.107] DML Start [2025-09-24 07:36:17.284] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:36:17.508] DML res1: 0 [2025-09-24 07:36:17.932] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:36:17.932] Read Success [2025-09-24 07:36:17.932] Verifying certificate... [2025-09-24 07:36:18.187] Verified OK [2025-09-24 07:36:18.203] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:36:19.818] Verified OK [2025-09-24 07:36:19.818] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:36:20.442] Verified OK [2025-09-24 07:36:20.458] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:36:23.064] fs.protected_hardlinks = 1 [2025-09-24 07:36:23.080] fs.protected_symlinks = 1 [2025-09-24 07:36:23.080] kernel.modules_disabled = 1 [2025-09-24 07:36:23.272] [2025-09-24 07:36:23.272] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:36:24.623] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:36:32.278] SBL1:1210.0.1.0 [2025-09-24 07:36:32.310] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:36:33.894] SBL2:1210.0.1.0 [2025-09-24 07:36:33.925] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:36:34.037] j-A [2025-09-24 07:36:41.411] The R5 Autosar Classic is running [2025-09-24 07:36:41.411] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:36:41.411] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:36:42.019] INIT: version 2.96 booting [2025-09-24 07:36:42.130] INIT: Entering runlevel: 5 [2025-09-24 07:36:42.291] mtd24 attached [2025-09-24 07:36:42.291] mtd32 attached [2025-09-24 07:36:42.307] mtd28 attached [2025-09-24 07:36:42.355] RTNETLINK answers: File exists [2025-09-24 07:36:42.355] ubi0:textures is mounted. [2025-09-24 07:36:42.418] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:36:42.418] ubi2:animations is mounted. [2025-09-24 07:36:42.418] ubi1:dml_code is mounted. [2025-09-24 07:36:42.418] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:36:42.418] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:36:42.418] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:36:42.418] data.LB_FadeInType0=100 [2025-09-24 07:36:42.418] data.CHLH_FadeInType0=0 [2025-09-24 07:36:42.418] data.WU_FadeInDelay=0 [2025-09-24 07:36:42.418] max_time_out=0 [2025-09-24 07:36:42.418] No splash screen [2025-09-24 07:36:42.418] stop dss Done [2025-09-24 07:36:42.418] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:36:42.509] /dev/mem opened. [2025-09-24 07:36:42.509] Memory mapped at address 0xffffa20d6000. [2025-09-24 07:36:42.509] Read at address 0x00600018 (0xffffa20d6018): 0x00000000 [2025-09-24 07:36:42.509] Write at address 0x00600018 (0xffffa20d6018): 0x00400040, readback 0x00400040 [2025-09-24 07:36:42.509] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:36:42.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:36:42.605] Loaded PowerVR consumer services. [2025-09-24 07:36:42.733] Waiting data available... [2025-09-24 07:36:42.749] 512+0 records in [2025-09-24 07:36:42.749] 512+0 records out [2025-09-24 07:36:42.781] Starting syslogd/klogd: done [2025-09-24 07:36:42.797] DML Start [2025-09-24 07:36:42.957] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:36:43.197] DML res1: 0 [2025-09-24 07:36:43.653] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:36:43.653] Read Success [2025-09-24 07:36:43.653] Verifying certificate... [2025-09-24 07:36:43.942] Verified OK [2025-09-24 07:36:43.958] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:36:45.617] Verified OK [2025-09-24 07:36:45.617] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:36:46.240] Verified OK [2025-09-24 07:36:46.240] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:36:48.926] fs.protected_hardlinks = 1 [2025-09-24 07:36:48.926] fs.protected_symlinks = 1 [2025-09-24 07:36:48.942] kernel.modules_disabled = 1 [2025-09-24 07:36:49.150] [2025-09-24 07:36:49.150] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:36:50.321] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:36:58.004] SBL1:1210.0.1.0 [2025-09-24 07:36:58.053] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:36:59.619] SBL2:1210.0.1.0 [2025-09-24 07:36:59.667] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:36:59.763] j-A [2025-09-24 07:37:07.117] The R5 Autosar Classic is running [2025-09-24 07:37:07.139] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:37:07.139] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:37:07.747] INIT: version 2.96 booting [2025-09-24 07:37:07.859] INIT: Entering runlevel: 5 [2025-09-24 07:37:08.019] mtd24 attached [2025-09-24 07:37:08.019] mtd28 attached [2025-09-24 07:37:08.035] mtd32 attached [2025-09-24 07:37:08.083] ubi0:textures is mounted. [2025-09-24 07:37:08.083] RTNETLINK answers: File exists [2025-09-24 07:37:08.121] ubi1:animations is mounted. [2025-09-24 07:37:08.121] ubi2:dml_code is mounted. [2025-09-24 07:37:08.121] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:37:08.121] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:37:08.121] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:37:08.121] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:37:08.121] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:37:08.143] data.LB_FadeInType0=100 [2025-09-24 07:37:08.143] data.CHLH_FadeInType0=0 [2025-09-24 07:37:08.143] data.WU_FadeInDelay=0 [2025-09-24 07:37:08.143] max_time_out=0 [2025-09-24 07:37:08.143] No splash screen [2025-09-24 07:37:08.143] stop dss Done [2025-09-24 07:37:08.215] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:37:08.215] /dev/mem opened. [2025-09-24 07:37:08.215] Memory mapped at address 0xffff9e2cc000. [2025-09-24 07:37:08.215] Read at address 0x00600018 (0xffff9e2cc018): 0x00000000 [2025-09-24 07:37:08.215] Write at address 0x00600018 (0xffff9e2cc018): 0x00400040, readback 0x00400040 [2025-09-24 07:37:08.215] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:37:08.439] Loaded PowerVR consumer services. [2025-09-24 07:37:08.471] Waiting data available... [2025-09-24 07:37:08.486] 512+0 records in [2025-09-24 07:37:08.486] 512+0 records out [2025-09-24 07:37:08.534] Starting syslogd/klogd: done [2025-09-24 07:37:08.550] DML Start [2025-09-24 07:37:08.710] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:37:08.935] DML res1: 0 [2025-09-24 07:37:09.435] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:37:09.435] Read Success [2025-09-24 07:37:09.435] Verifying certificate... [2025-09-24 07:37:09.675] Verified OK [2025-09-24 07:37:09.691] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:37:11.185] Verified OK [2025-09-24 07:37:11.185] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:37:11.833] Verified OK [2025-09-24 07:37:11.833] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:37:14.583] fs.protected_hardlinks = 1 [2025-09-24 07:37:14.583] fs.protected_symlinks = 1 [2025-09-24 07:37:14.599] kernel.modules_disabled = 1 [2025-09-24 07:37:14.791] [2025-09-24 07:37:14.791] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:37:15.974] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:37:23.739] SBL1:1210.0.1.0 [2025-09-24 07:37:23.771] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:37:25.353] SBL2:1210.0.1.0 [2025-09-24 07:37:25.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:37:25.497] j-A [2025-09-24 07:37:32.872] The R5 Autosar Classic is running [2025-09-24 07:37:32.872] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:37:32.872] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:37:33.480] INIT: version 2.96 booting [2025-09-24 07:37:33.591] INIT: Entering runlevel: 5 [2025-09-24 07:37:33.751] mtd24 attached [2025-09-24 07:37:33.751] mtd32 attached [2025-09-24 07:37:33.767] mtd28 attached [2025-09-24 07:37:33.815] RTNETLINK answers: File exists [2025-09-24 07:37:33.815] ubi0:textures is mounted. [2025-09-24 07:37:33.880] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:37:33.880] ubi2:animations is mounted. [2025-09-24 07:37:33.880] ubi1:dml_code is mounted. [2025-09-24 07:37:33.880] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:37:33.880] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:37:33.880] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:37:33.880] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:37:33.880] data.LB_FadeInType0=100 [2025-09-24 07:37:33.880] data.CHLH_FadeInType0=0 [2025-09-24 07:37:33.880] data.WU_FadeInDelay=0 [2025-09-24 07:37:33.880] max_time_out=0 [2025-09-24 07:37:33.880] No splash screen [2025-09-24 07:37:33.880] stop dss Done [2025-09-24 07:37:33.921] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:37:33.921] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:37:33.921] /dev/mem opened. [2025-09-24 07:37:33.921] Memory mapped at address 0xffff9ba22000. [2025-09-24 07:37:33.947] Read at address 0x00600018 (0xffff9ba22018): 0x00000000 [2025-09-24 07:37:33.947] Write at address 0x00600018 (0xffff9ba22018): 0x00400040, readback 0x00400040 [2025-09-24 07:37:34.091] Loaded PowerVR consumer services. [2025-09-24 07:37:34.219] Waiting data available... [2025-09-24 07:37:34.219] 512+0 records in [2025-09-24 07:37:34.219] 512+0 records out [2025-09-24 07:37:34.267] Starting syslogd/klogd: done [2025-09-24 07:37:34.283] DML Start [2025-09-24 07:37:34.475] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:37:34.699] DML res1: 0 [2025-09-24 07:37:35.098] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:37:35.114] Read Success [2025-09-24 07:37:35.114] Verifying certificate... [2025-09-24 07:37:35.338] Verified OK [2025-09-24 07:37:35.354] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:37:37.017] Verified OK [2025-09-24 07:37:37.017] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:37:37.664] Verified OK [2025-09-24 07:37:37.664] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:37:40.302] fs.protected_hardlinks = 1 [2025-09-24 07:37:40.302] fs.protected_symlinks = 1 [2025-09-24 07:37:40.318] kernel.modules_disabled = 1 [2025-09-24 07:37:40.509] [2025-09-24 07:37:40.509] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:37:41.722] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:37:49.454] SBL1:1210.0.1.0 [2025-09-24 07:37:49.502] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:37:51.069] SBL2:1210.0.1.0 [2025-09-24 07:37:51.116] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:37:51.213] j-A [2025-09-24 07:37:58.566] The R5 Autosar Classic is running [2025-09-24 07:37:58.589] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:37:58.589] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:37:59.196] INIT: version 2.96 booting [2025-09-24 07:37:59.308] INIT: Entering runlevel: 5 [2025-09-24 07:37:59.469] mtd32 attached [2025-09-24 07:37:59.469] mtd28 attached [2025-09-24 07:37:59.485] mtd24 attached [2025-09-24 07:37:59.590] RTNETLINK answers: File exists [2025-09-24 07:37:59.590] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:37:59.590] ubi1:animations is mounted. [2025-09-24 07:37:59.590] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:37:59.590] ubi0:dml_code is mounted. [2025-09-24 07:37:59.590] ubi2:textures is mounted. [2025-09-24 07:37:59.590] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:37:59.590] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:37:59.590] data.LB_FadeInType0=100 [2025-09-24 07:37:59.590] data.CHLH_FadeInType0=0 [2025-09-24 07:37:59.590] data.WU_FadeInDelay=0 [2025-09-24 07:37:59.590] max_time_out=0 [2025-09-24 07:37:59.590] No splash screen [2025-09-24 07:37:59.590] stop dss Done [2025-09-24 07:37:59.590] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:37:59.638] /dev/mem opened. [2025-09-24 07:37:59.638] Memory mapped at address 0xffffa042b000. [2025-09-24 07:37:59.671] Read at address 0x00600018 (0xffffa042b018): 0x00000000 [2025-09-24 07:37:59.671] Write at address 0x00600018 (0xffffa042b018): 0x00400040, readback 0x00400040 [2025-09-24 07:37:59.671] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:37:59.671] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:37:59.766] Loaded PowerVR consumer services. [2025-09-24 07:37:59.909] Waiting data available... [2025-09-24 07:37:59.926] 512+0 records in [2025-09-24 07:37:59.926] 512+0 records out [2025-09-24 07:37:59.958] Starting syslogd/klogd: done [2025-09-24 07:37:59.974] DML Start [2025-09-24 07:38:00.150] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:38:00.374] DML res1: 0 [2025-09-24 07:38:00.883] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:38:00.883] Read Success [2025-09-24 07:38:00.883] Verifying certificate... [2025-09-24 07:38:01.139] Verified OK [2025-09-24 07:38:01.155] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:38:02.793] Verified OK [2025-09-24 07:38:02.793] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:38:03.369] Verified OK [2025-09-24 07:38:03.369] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:38:05.959] fs.protected_hardlinks = 1 [2025-09-24 07:38:05.959] fs.protected_symlinks = 1 [2025-09-24 07:38:05.975] kernel.modules_disabled = 1 [2025-09-24 07:38:06.167] [2025-09-24 07:38:06.167] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:38:07.413] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:38:15.187] SBL1:1210.0.1.0 [2025-09-24 07:38:15.219] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:38:16.802] SBL2:1210.0.1.0 [2025-09-24 07:38:16.834] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:38:16.946] j-A [2025-09-24 07:38:24.316] The R5 Autosar Classic is running [2025-09-24 07:38:24.316] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:38:24.316] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:38:24.923] INIT: version 2.96 booting [2025-09-24 07:38:25.034] INIT: Entering runlevel: 5 [2025-09-24 07:38:25.179] mtd24 attached [2025-09-24 07:38:25.195] mtd32 attached [2025-09-24 07:38:25.211] mtd28 attached [2025-09-24 07:38:25.259] ubi0:textures is mounted. [2025-09-24 07:38:25.259] RTNETLINK answers: File exists [2025-09-24 07:38:25.294] ubi1:dml_code is mounted. [2025-09-24 07:38:25.294] ubi2:animations is mounted. [2025-09-24 07:38:25.294] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:38:25.294] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:38:25.294] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:38:25.328] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:38:25.328] data.LB_FadeInType0=100 [2025-09-24 07:38:25.328] data.CHLH_FadeInType0=0 [2025-09-24 07:38:25.328] data.WU_FadeInDelay=0 [2025-09-24 07:38:25.328] max_time_out=0 [2025-09-24 07:38:25.328] No splash screen [2025-09-24 07:38:25.328] stop dss Done [2025-09-24 07:38:25.328] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:38:25.397] /dev/mem opened. [2025-09-24 07:38:25.397] Memory mapped at address 0xffffa108a000. [2025-09-24 07:38:25.397] Read at address 0x00600018 (0xffffa108a018): 0x00000000 [2025-09-24 07:38:25.397] Write at address 0x00600018 (0xffffa108a018): 0x00400040, readback 0x00400040 [2025-09-24 07:38:25.430] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:38:25.446] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:38:25.605] Loaded PowerVR consumer services. [2025-09-24 07:38:25.637] 512+0 records in [2025-09-24 07:38:25.637] 512+0 records out [2025-09-24 07:38:25.669] Waiting data available... [2025-09-24 07:38:25.685] Starting syslogd/klogd: done [2025-09-24 07:38:25.702] DML Start [2025-09-24 07:38:25.894] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:38:26.117] DML res1: 0 [2025-09-24 07:38:26.555] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:38:26.555] Read Success [2025-09-24 07:38:26.555] Verifying certificate... [2025-09-24 07:38:26.779] Verified OK [2025-09-24 07:38:26.795] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:38:28.439] Verified OK [2025-09-24 07:38:28.439] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:38:29.030] Verified OK [2025-09-24 07:38:29.046] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:38:31.796] fs.protected_hardlinks = 1 [2025-09-24 07:38:31.796] fs.protected_symlinks = 1 [2025-09-24 07:38:31.812] kernel.modules_disabled = 1 [2025-09-24 07:38:32.004] [2025-09-24 07:38:32.004] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:38:33.167] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:38:40.896] SBL1:1210.0.1.0 [2025-09-24 07:38:40.944] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:38:42.510] SBL2:1210.0.1.0 [2025-09-24 07:38:42.558] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:38:42.655] j-A [2025-09-24 07:38:50.008] The R5 Autosar Classic is running [2025-09-24 07:38:50.030] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:38:50.030] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:38:50.637] INIT: version 2.96 booting [2025-09-24 07:38:50.750] INIT: Entering runlevel: 5 [2025-09-24 07:38:50.909] mtd28 attached [2025-09-24 07:38:50.909] mtd24 attached [2025-09-24 07:38:50.925] mtd32 attached [2025-09-24 07:38:50.957] ubi0:animations is mounted. [2025-09-24 07:38:50.973] RTNETLINK answers: File exists [2025-09-24 07:38:51.017] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:38:51.017] ubi2:dml_code is mounted. [2025-09-24 07:38:51.017] ubi1:textures is mounted. [2025-09-24 07:38:51.017] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:38:51.017] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:38:51.017] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:38:51.017] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:38:51.038] data.LB_FadeInType0=100 [2025-09-24 07:38:51.038] data.CHLH_FadeInType0=0 [2025-09-24 07:38:51.038] data.WU_FadeInDelay=0 [2025-09-24 07:38:51.038] max_time_out=0 [2025-09-24 07:38:51.038] No splash screen [2025-09-24 07:38:51.038] stop dss Done [2025-09-24 07:38:51.128] /dev/mem opened. [2025-09-24 07:38:51.128] Memory mapped at address 0xffff9e991000. [2025-09-24 07:38:51.128] Read at address 0x00600018 (0xffff9e991018): 0x00000000 [2025-09-24 07:38:51.128] Write at address 0x00600018 (0xffff9e991018): 0x00400040, readback 0x00400040 [2025-09-24 07:38:51.128] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:38:51.128] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:38:51.319] Loaded PowerVR consumer services. [2025-09-24 07:38:51.399] Waiting data available... [2025-09-24 07:38:51.415] 512+0 records in [2025-09-24 07:38:51.415] 512+0 records out [2025-09-24 07:38:51.463] Starting syslogd/klogd: done [2025-09-24 07:38:51.479] DML Start [2025-09-24 07:38:51.639] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:38:51.847] DML res1: 0 [2025-09-24 07:38:52.331] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:38:52.331] Read Success [2025-09-24 07:38:52.331] Verifying certificate... [2025-09-24 07:38:52.604] Verified OK [2025-09-24 07:38:52.620] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:38:54.378] Verified OK [2025-09-24 07:38:54.378] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:38:54.906] Verified OK [2025-09-24 07:38:54.906] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:38:57.414] fs.protected_hardlinks = 1 [2025-09-24 07:38:57.414] fs.protected_symlinks = 1 [2025-09-24 07:38:57.414] kernel.modules_disabled = 1 [2025-09-24 07:38:57.590] [2025-09-24 07:38:57.590] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:38:58.958] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:39:06.645] SBL1:1210.0.1.0 [2025-09-24 07:39:06.677] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:39:08.261] SBL2:1210.0.1.0 [2025-09-24 07:39:08.292] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 07:39:08.404] j-A [2025-09-24 07:39:15.773] The R5 Autosar Classic is running [2025-09-24 07:39:15.773] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:39:15.773] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:39:16.381] INIT: version 2.96 booting [2025-09-24 07:39:16.493] INIT: Entering runlevel: 5 [2025-09-24 07:39:16.653] mtd32 attached [2025-09-24 07:39:16.653] mtd24 attached [2025-09-24 07:39:16.669] mtd28 attached [2025-09-24 07:39:16.717] RTNETLINK answers: File exists [2025-09-24 07:39:16.717] ubi0:dml_code is mounted. [2025-09-24 07:39:16.774] ubi1:textures is mounted. [2025-09-24 07:39:16.774] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:39:16.774] ubi2:animations is mounted. [2025-09-24 07:39:16.774] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:39:16.774] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:39:16.774] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:39:16.774] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:39:16.774] data.LB_FadeInType0=100 [2025-09-24 07:39:16.774] data.CHLH_FadeInType0=0 [2025-09-24 07:39:16.774] data.WU_FadeInDelay=0 [2025-09-24 07:39:16.774] max_time_out=0 [2025-09-24 07:39:16.774] No splash screen [2025-09-24 07:39:16.774] stop dss Done [2025-09-24 07:39:16.846] /dev/mem opened. [2025-09-24 07:39:16.846] Memory mapped at address 0xffff93289000. [2025-09-24 07:39:16.846] Read at address 0x00600018 (0xffff93289018): 0x00000000 [2025-09-24 07:39:16.846] Write at address 0x00600018 (0xffff93289018): 0x00400040, readback 0x00400040 [2025-09-24 07:39:16.874] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:39:16.874] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:39:17.099] Loaded PowerVR consumer services. [2025-09-24 07:39:17.115] Waiting data available... [2025-09-24 07:39:17.131] 512+0 records in [2025-09-24 07:39:17.131] 512+0 records out [2025-09-24 07:39:17.178] Starting syslogd/klogd: done [2025-09-24 07:39:17.194] DML Start [2025-09-24 07:39:17.370] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:39:17.578] DML res1: 0 [2025-09-24 07:39:18.010] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:39:18.031] Read Success [2025-09-24 07:39:18.031] Verifying certificate... [2025-09-24 07:39:18.286] Verified OK [2025-09-24 07:39:18.302] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:39:19.981] Verified OK [2025-09-24 07:39:19.981] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:39:20.570] Verified OK [2025-09-24 07:39:20.570] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:39:23.208] fs.protected_hardlinks = 1 [2025-09-24 07:39:23.208] fs.protected_symlinks = 1 [2025-09-24 07:39:23.224] kernel.modules_disabled = 1 [2025-09-24 07:39:23.416] [2025-09-24 07:39:23.416] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:39:24.645] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:39:32.343] SBL1:1210.0.1.0 [2025-09-24 07:39:32.391] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:39:33.958] SBL2:1210.0.1.0 [2025-09-24 07:39:34.006] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:39:34.102] j-A [2025-09-24 07:39:41.456] The R5 Autosar Classic is running [2025-09-24 07:39:41.481] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:39:41.481] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:39:42.089] INIT: version 2.96 booting [2025-09-24 07:39:42.201] INIT: Entering runlevel: 5 [2025-09-24 07:39:42.360] mtd24 attached [2025-09-24 07:39:42.360] mtd28 attached [2025-09-24 07:39:42.376] mtd32 attached [2025-09-24 07:39:42.424] RTNETLINK answers: File exists [2025-09-24 07:39:42.424] ubi0:textures is mounted. [2025-09-24 07:39:42.489] ubi1:animations is mounted. [2025-09-24 07:39:42.489] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:39:42.489] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:39:42.489] ubi2:dml_code is mounted. [2025-09-24 07:39:42.489] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:39:42.489] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:39:42.489] data.LB_FadeInType0=100 [2025-09-24 07:39:42.489] data.CHLH_FadeInType0=0 [2025-09-24 07:39:42.489] data.WU_FadeInDelay=0 [2025-09-24 07:39:42.489] max_time_out=0 [2025-09-24 07:39:42.489] No splash screen [2025-09-24 07:39:42.489] stop dss Done [2025-09-24 07:39:42.489] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:39:42.557] /dev/mem opened. [2025-09-24 07:39:42.557] Memory mapped at address 0xffff7fc0d000. [2025-09-24 07:39:42.557] Read at address 0x00600018 (0xffff7fc0d018): 0x00000000 [2025-09-24 07:39:42.557] Write at address 0x00600018 (0xffff7fc0d018): 0x00400040, readback 0x00400040 [2025-09-24 07:39:42.573] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:39:42.589] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:39:42.716] Loaded PowerVR consumer services. [2025-09-24 07:39:42.858] Waiting data available... [2025-09-24 07:39:42.858] 512+0 records in [2025-09-24 07:39:42.858] 512+0 records out [2025-09-24 07:39:42.873] Starting syslogd/klogd: done [2025-09-24 07:39:42.889] DML Start [2025-09-24 07:39:43.097] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:39:43.321] DML res1: 0 [2025-09-24 07:39:43.769] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:39:43.785] Read Success [2025-09-24 07:39:43.785] Verifying certificate... [2025-09-24 07:39:44.056] Verified OK [2025-09-24 07:39:44.072] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:39:45.836] Verified OK [2025-09-24 07:39:45.836] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:39:46.365] Verified OK [2025-09-24 07:39:46.365] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:39:48.922] fs.protected_hardlinks = 1 [2025-09-24 07:39:48.922] fs.protected_symlinks = 1 [2025-09-24 07:39:48.938] kernel.modules_disabled = 1 [2025-09-24 07:39:49.130] [2025-09-24 07:39:49.130] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:39:50.374] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:39:58.053] SBL1:1210.0.1.0 [2025-09-24 07:39:58.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:39:59.668] SBL2:1210.0.1.0 [2025-09-24 07:39:59.716] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:39:59.812] j-A [2025-09-24 07:40:07.167] The R5 Autosar Classic is running [2025-09-24 07:40:07.190] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:40:07.190] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:40:07.797] INIT: version 2.96 booting [2025-09-24 07:40:07.909] INIT: Entering runlevel: 5 [2025-09-24 07:40:08.053] mtd24 attached [2025-09-24 07:40:08.069] mtd32 attached [2025-09-24 07:40:08.085] mtd28 attached [2025-09-24 07:40:08.165] ubi0:textures is mounted. [2025-09-24 07:40:08.165] RTNETLINK answers: File exists [2025-09-24 07:40:08.165] ubi1:dml_code is mounted. [2025-09-24 07:40:08.165] ubi2:animations is mounted. [2025-09-24 07:40:08.165] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:40:08.165] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:40:08.165] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:40:08.165] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:40:08.193] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:40:08.193] data.LB_FadeInType0=100 [2025-09-24 07:40:08.193] data.CHLH_FadeInType0=0 [2025-09-24 07:40:08.193] data.WU_FadeInDelay=0 [2025-09-24 07:40:08.193] max_time_out=0 [2025-09-24 07:40:08.193] No splash screen [2025-09-24 07:40:08.193] stop dss Done [2025-09-24 07:40:08.282] /dev/mem opened. [2025-09-24 07:40:08.282] Memory mapped at address 0xffffa2ea6000. [2025-09-24 07:40:08.282] Read at address 0x00600018 (0xffffa2ea6018): 0x00000000 [2025-09-24 07:40:08.282] Write at address 0x00600018 (0xffffa2ea6018): 0x00400040, readback 0x00400040 [2025-09-24 07:40:08.282] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:40:08.282] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:40:08.410] Loaded PowerVR consumer services. [2025-09-24 07:40:08.522] Waiting data available... [2025-09-24 07:40:08.537] 512+0 records in [2025-09-24 07:40:08.553] 512+0 records out [2025-09-24 07:40:08.569] Starting syslogd/klogd: done [2025-09-24 07:40:08.585] DML Start [2025-09-24 07:40:08.761] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:40:08.969] DML res1: 0 [2025-09-24 07:40:09.385] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:40:09.406] Read Success [2025-09-24 07:40:09.406] Verifying certificate... [2025-09-24 07:40:09.630] Verified OK [2025-09-24 07:40:09.646] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:40:11.352] Verified OK [2025-09-24 07:40:11.352] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:40:11.972] Verified OK [2025-09-24 07:40:11.972] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:40:14.513] fs.protected_hardlinks = 1 [2025-09-24 07:40:14.529] fs.protected_symlinks = 1 [2025-09-24 07:40:14.529] kernel.modules_disabled = 1 [2025-09-24 07:40:14.721] [2025-09-24 07:40:14.721] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:40:16.043] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:40:23.783] SBL1:1210.0.1.0 [2025-09-24 07:40:23.815] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:40:25.397] SBL2:1210.0.1.0 [2025-09-24 07:40:25.429] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:40:25.541] j-A [2025-09-24 07:40:32.912] The R5 Autosar Classic is running [2025-09-24 07:40:32.912] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:40:32.912] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:40:33.519] INIT: version 2.96 booting [2025-09-24 07:40:33.631] INIT: Entering runlevel: 5 [2025-09-24 07:40:33.775] mtd32 attached [2025-09-24 07:40:33.791] mtd28 attached [2025-09-24 07:40:33.791] mtd24 attached [2025-09-24 07:40:33.839] ubi0:dml_code is mounted. [2025-09-24 07:40:33.855] RTNETLINK answers: File exists [2025-09-24 07:40:33.855] ubi1:animations is mounted. [2025-09-24 07:40:33.913] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:40:33.913] ubi2:textures is mounted. [2025-09-24 07:40:33.913] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:40:33.913] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:40:33.913] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:40:33.913] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:40:33.913] data.LB_FadeInType0=100 [2025-09-24 07:40:33.913] data.CHLH_FadeInType0=0 [2025-09-24 07:40:33.913] data.WU_FadeInDelay=0 [2025-09-24 07:40:33.913] max_time_out=0 [2025-09-24 07:40:33.913] No splash screen [2025-09-24 07:40:33.913] stop dss Done [2025-09-24 07:40:33.993] /dev/mem opened. [2025-09-24 07:40:33.993] Memory mapped at address 0xffff93482000. [2025-09-24 07:40:33.993] Read at address 0x00600018 (0xffff93482018): 0x00000000 [2025-09-24 07:40:33.993] Write at address 0x00600018 (0xffff93482018): 0x00400040, readback 0x00400040 [2025-09-24 07:40:33.993] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:40:33.993] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:40:34.168] Loaded PowerVR consumer services. [2025-09-24 07:40:34.249] Waiting data available... [2025-09-24 07:40:34.265] 512+0 records in [2025-09-24 07:40:34.265] 512+0 records out [2025-09-24 07:40:34.312] Starting syslogd/klogd: done [2025-09-24 07:40:34.328] DML Start [2025-09-24 07:40:34.473] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:40:34.664] DML res1: 0 [2025-09-24 07:40:35.169] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:40:35.169] Read Success [2025-09-24 07:40:35.169] Verifying certificate... [2025-09-24 07:40:35.377] Verified OK [2025-09-24 07:40:35.393] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:40:37.048] Verified OK [2025-09-24 07:40:37.048] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:40:37.629] Verified OK [2025-09-24 07:40:37.629] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:40:40.250] fs.protected_hardlinks = 1 [2025-09-24 07:40:40.250] fs.protected_symlinks = 1 [2025-09-24 07:40:40.266] kernel.modules_disabled = 1 [2025-09-24 07:40:40.458] [2025-09-24 07:40:40.458] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:40:41.754] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:40:49.506] SBL1:1210.0.1.0 [2025-09-24 07:40:49.538] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:40:51.121] SBL2:1210.0.1.0 [2025-09-24 07:40:51.152] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:40:51.265] j-A [2025-09-24 07:40:58.637] The R5 Autosar Classic is running [2025-09-24 07:40:58.637] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:40:58.637] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:40:59.245] INIT: version 2.96 booting [2025-09-24 07:40:59.357] INIT: Entering runlevel: 5 [2025-09-24 07:40:59.501] mtd24 attached [2025-09-24 07:40:59.517] mtd28 attached [2025-09-24 07:40:59.533] mtd32 attached [2025-09-24 07:40:59.616] RTNETLINK answers: File exists [2025-09-24 07:40:59.616] ubi0:textures is mounted. [2025-09-24 07:40:59.616] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:40:59.616] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:40:59.616] ubi1:animations is mounted. [2025-09-24 07:40:59.616] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:40:59.616] ubi2:dml_code is mounted. [2025-09-24 07:40:59.616] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:40:59.616] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:40:59.638] data.LB_FadeInType0=100 [2025-09-24 07:40:59.638] data.CHLH_FadeInType0=0 [2025-09-24 07:40:59.638] data.WU_FadeInDelay=0 [2025-09-24 07:40:59.638] max_time_out=0 [2025-09-24 07:40:59.638] No splash screen [2025-09-24 07:40:59.638] stop dss Done [2025-09-24 07:40:59.717] /dev/mem opened. [2025-09-24 07:40:59.717] Memory mapped at address 0xffff9bf84000. [2025-09-24 07:40:59.717] Read at address 0x00600018 (0xffff9bf84018): 0x00000000 [2025-09-24 07:40:59.717] Write at address 0x00600018 (0xffff9bf84018): 0x00400040, readback 0x00400040 [2025-09-24 07:40:59.717] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:40:59.717] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:40:59.942] Loaded PowerVR consumer services. [2025-09-24 07:40:59.958] Waiting data available... [2025-09-24 07:40:59.973] 512+0 records in [2025-09-24 07:40:59.989] 512+0 records out [2025-09-24 07:41:00.021] Starting syslogd/klogd: done [2025-09-24 07:41:00.037] DML Start [2025-09-24 07:41:00.198] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:41:00.453] DML res1: 0 [2025-09-24 07:41:00.846] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:41:00.846] Read Success [2025-09-24 07:41:00.846] Verifying certificate... [2025-09-24 07:41:01.085] Verified OK [2025-09-24 07:41:01.117] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:41:02.731] Verified OK [2025-09-24 07:41:02.731] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:41:03.399] Verified OK [2025-09-24 07:41:03.399] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:41:06.164] fs.protected_hardlinks = 1 [2025-09-24 07:41:06.164] fs.protected_symlinks = 1 [2025-09-24 07:41:06.164] kernel.modules_disabled = 1 [2025-09-24 07:41:06.357] [2025-09-24 07:41:06.357] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:41:07.547] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:41:15.221] SBL1:1210.0.1.0 [2025-09-24 07:41:15.253] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:41:16.836] SBL2:1210.0.1.0 [2025-09-24 07:41:16.868] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:41:16.979] j-A [2025-09-24 07:41:24.354] The R5 Autosar Classic is running [2025-09-24 07:41:24.354] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:41:24.354] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:41:24.961] INIT: version 2.96 booting [2025-09-24 07:41:25.073] INIT: Entering runlevel: 5 [2025-09-24 07:41:25.234] mtd28 attached [2025-09-24 07:41:25.234] mtd24 attached [2025-09-24 07:41:25.250] mtd32 attached [2025-09-24 07:41:25.297] RTNETLINK answers: File exists [2025-09-24 07:41:25.297] ubi0:animations is mounted. [2025-09-24 07:41:25.355] ubi2:dml_code is mounted. [2025-09-24 07:41:25.355] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:41:25.355] ubi1:textures is mounted. [2025-09-24 07:41:25.355] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:41:25.355] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:41:25.355] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:41:25.355] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:41:25.355] data.LB_FadeInType0=100 [2025-09-24 07:41:25.355] data.CHLH_FadeInType0=0 [2025-09-24 07:41:25.355] data.WU_FadeInDelay=0 [2025-09-24 07:41:25.355] max_time_out=0 [2025-09-24 07:41:25.355] No splash screen [2025-09-24 07:41:25.355] stop dss Done [2025-09-24 07:41:25.403] /dev/mem opened. [2025-09-24 07:41:25.445] Memory mapped at address 0xffff9906a000. [2025-09-24 07:41:25.445] Read at address 0x00600018 (0xffff9906a018): 0x00000000 [2025-09-24 07:41:25.445] Write at address 0x00600018 (0xffff9906a018): 0x00400040, readback 0x00400040 [2025-09-24 07:41:25.445] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:41:25.445] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:41:25.524] Loaded PowerVR consumer services. [2025-09-24 07:41:25.707] Waiting data available... [2025-09-24 07:41:25.707] 512+0 records in [2025-09-24 07:41:25.707] 512+0 records out [2025-09-24 07:41:25.739] Starting syslogd/klogd: done [2025-09-24 07:41:25.755] DML Start [2025-09-24 07:41:25.915] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:41:26.139] DML res1: 0 [2025-09-24 07:41:26.602] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:41:26.602] Read Success [2025-09-24 07:41:26.602] Verifying certificate... [2025-09-24 07:41:26.873] Verified OK [2025-09-24 07:41:26.889] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:41:28.564] Verified OK [2025-09-24 07:41:28.564] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:41:29.107] Verified OK [2025-09-24 07:41:29.107] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:41:31.761] fs.protected_hardlinks = 1 [2025-09-24 07:41:31.761] fs.protected_symlinks = 1 [2025-09-24 07:41:31.777] kernel.modules_disabled = 1 [2025-09-24 07:41:31.968] [2025-09-24 07:41:31.968] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:41:33.184] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:41:40.928] SBL1:1210.0.1.0 [2025-09-24 07:41:40.976] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:41:42.543] SBL2:1210.0.1.0 [2025-09-24 07:41:42.591] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:41:42.687] j-A [2025-09-24 07:41:50.042] The R5 Autosar Classic is running [2025-09-24 07:41:50.067] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:41:50.067] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:41:50.674] INIT: version 2.96 booting [2025-09-24 07:41:50.786] INIT: Entering runlevel: 5 [2025-09-24 07:41:50.946] mtd28 attached [2025-09-24 07:41:50.946] mtd24 attached [2025-09-24 07:41:50.962] mtd32 attached [2025-09-24 07:41:51.010] ubi0:animations is mounted. [2025-09-24 07:41:51.010] RTNETLINK answers: File exists [2025-09-24 07:41:51.067] ubi1:textures is mounted. [2025-09-24 07:41:51.067] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:41:51.067] ubi2:dml_code is mounted. [2025-09-24 07:41:51.067] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:41:51.067] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:41:51.067] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:41:51.067] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:41:51.067] data.LB_FadeInType0=100 [2025-09-24 07:41:51.067] data.CHLH_FadeInType0=0 [2025-09-24 07:41:51.067] data.WU_FadeInDelay=0 [2025-09-24 07:41:51.067] max_time_out=0 [2025-09-24 07:41:51.067] No splash screen [2025-09-24 07:41:51.067] stop dss Done [2025-09-24 07:41:51.130] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:41:51.130] /dev/mem opened. [2025-09-24 07:41:51.130] Memory mapped at address 0xffff82785000. [2025-09-24 07:41:51.130] Read at address 0x00600018 (0xffff82785018): 0x00000000 [2025-09-24 07:41:51.130] Write at address 0x00600018 (0xffff82785018): 0x00400040, readback 0x00400040 [2025-09-24 07:41:51.130] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:41:51.258] Loaded PowerVR consumer services. [2025-09-24 07:41:51.401] Waiting data available... [2025-09-24 07:41:51.417] 512+0 records in [2025-09-24 07:41:51.417] 512+0 records out [2025-09-24 07:41:51.449] Starting syslogd/klogd: done [2025-09-24 07:41:51.466] DML Start [2025-09-24 07:41:51.625] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:41:51.833] DML res1: 0 [2025-09-24 07:41:52.339] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:41:52.339] Read Success [2025-09-24 07:41:52.339] Verifying certificate... [2025-09-24 07:41:52.579] Verified OK [2025-09-24 07:41:52.595] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:41:54.280] Verified OK [2025-09-24 07:41:54.280] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:41:54.833] Verified OK [2025-09-24 07:41:54.833] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:41:57.295] fs.protected_hardlinks = 1 [2025-09-24 07:41:57.295] fs.protected_symlinks = 1 [2025-09-24 07:41:57.310] kernel.modules_disabled = 1 [2025-09-24 07:41:57.503] [2025-09-24 07:41:57.503] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:41:58.978] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:42:06.644] SBL1:1210.0.1.0 [2025-09-24 07:42:06.676] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:42:08.258] SBL2:1210.0.1.0 [2025-09-24 07:42:08.290] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:42:08.403] j-A [2025-09-24 07:42:15.772] The R5 Autosar Classic is running [2025-09-24 07:42:15.772] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:42:15.772] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:42:16.380] INIT: version 2.96 booting [2025-09-24 07:42:16.492] INIT: Entering runlevel: 5 [2025-09-24 07:42:16.636] mtd28 attached [2025-09-24 07:42:16.652] mtd24 attached [2025-09-24 07:42:16.668] mtd32 attached [2025-09-24 07:42:16.716] ubi0:animations is mounted. [2025-09-24 07:42:16.716] RTNETLINK answers: File exists [2025-09-24 07:42:16.773] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:42:16.773] ubi1:textures is mounted. [2025-09-24 07:42:16.773] ubi2:dml_code is mounted. [2025-09-24 07:42:16.773] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:42:16.773] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:42:16.773] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:42:16.773] data.LB_FadeInType0=100 [2025-09-24 07:42:16.773] data.CHLH_FadeInType0=0 [2025-09-24 07:42:16.773] data.WU_FadeInDelay=0 [2025-09-24 07:42:16.773] max_time_out=0 [2025-09-24 07:42:16.773] No splash screen [2025-09-24 07:42:16.773] stop dss Done [2025-09-24 07:42:16.773] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:42:16.874] /dev/mem opened. [2025-09-24 07:42:16.874] Memory mapped at address 0xffff838b3000. [2025-09-24 07:42:16.874] Read at address 0x00600018 (0xffff838b3018): 0x00000000 [2025-09-24 07:42:16.874] Write at address 0x00600018 (0xffff838b3018): 0x00400040, readback 0x00400040 [2025-09-24 07:42:16.874] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:42:16.874] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:42:17.034] Loaded PowerVR consumer services. [2025-09-24 07:42:17.129] Waiting data available... [2025-09-24 07:42:17.145] 512+0 records in [2025-09-24 07:42:17.145] 512+0 records out [2025-09-24 07:42:17.177] Starting syslogd/klogd: done [2025-09-24 07:42:17.193] DML Start [2025-09-24 07:42:17.386] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:42:17.578] DML res1: 0 [2025-09-24 07:42:18.073] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:42:18.089] Read Success [2025-09-24 07:42:18.089] Verifying certificate... [2025-09-24 07:42:18.377] Verified OK [2025-09-24 07:42:18.393] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:42:19.880] Verified OK [2025-09-24 07:42:19.880] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:42:20.503] Verified OK [2025-09-24 07:42:20.503] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:42:23.173] fs.protected_hardlinks = 1 [2025-09-24 07:42:23.173] fs.protected_symlinks = 1 [2025-09-24 07:42:23.189] kernel.modules_disabled = 1 [2025-09-24 07:42:23.381] [2025-09-24 07:42:23.381] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:42:24.643] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:42:32.355] SBL1:1210.0.1.0 [2025-09-24 07:42:32.403] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:42:33.971] SBL2:1210.0.1.0 [2025-09-24 07:42:34.018] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:42:34.130] j-A [2025-09-24 07:42:41.469] The R5 Autosar Classic is running [2025-09-24 07:42:41.500] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:42:41.500] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:42:42.107] INIT: version 2.96 booting [2025-09-24 07:42:42.203] INIT: Entering runlevel: 5 [2025-09-24 07:42:42.363] mtd32 attached [2025-09-24 07:42:42.379] mtd28 attached [2025-09-24 07:42:42.379] mtd24 attached [2025-09-24 07:42:42.427] ubi0:dml_code is mounted. [2025-09-24 07:42:42.479] RTNETLINK answers: File exists [2025-09-24 07:42:42.479] ubi1:animations is mounted. [2025-09-24 07:42:42.479] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:42:42.479] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:42:42.479] ubi2:textures is mounted. [2025-09-24 07:42:42.479] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:42:42.479] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:42:42.479] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:42:42.479] data.LB_FadeInType0=100 [2025-09-24 07:42:42.500] data.CHLH_FadeInType0=0 [2025-09-24 07:42:42.500] data.WU_FadeInDelay=0 [2025-09-24 07:42:42.500] max_time_out=0 [2025-09-24 07:42:42.500] No splash screen [2025-09-24 07:42:42.500] stop dss Done [2025-09-24 07:42:42.548] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:42:42.580] /dev/mem opened. [2025-09-24 07:42:42.580] Memory mapped at address 0xffff8d731000. [2025-09-24 07:42:42.580] Read at address 0x00600018 (0xffff8d731018): 0x00000000 [2025-09-24 07:42:42.580] Write at address 0x00600018 (0xffff8d731018): 0x00400040, readback 0x00400040 [2025-09-24 07:42:42.580] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:42:42.756] Loaded PowerVR consumer services. [2025-09-24 07:42:42.849] 512+0 records in [2025-09-24 07:42:42.849] 512+0 records out [2025-09-24 07:42:42.849] Waiting data available... [2025-09-24 07:42:42.866] Starting syslogd/klogd: done [2025-09-24 07:42:42.882] DML Start [2025-09-24 07:42:43.041] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:42:43.249] DML res1: 0 [2025-09-24 07:42:43.729] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:42:43.729] Read Success [2025-09-24 07:42:43.729] Verifying certificate... [2025-09-24 07:42:43.952] Verified OK [2025-09-24 07:42:43.968] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:42:45.676] Verified OK [2025-09-24 07:42:45.676] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:42:46.290] Verified OK [2025-09-24 07:42:46.290] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:42:48.993] fs.protected_hardlinks = 1 [2025-09-24 07:42:49.009] fs.protected_symlinks = 1 [2025-09-24 07:42:49.009] kernel.modules_disabled = 1 [2025-09-24 07:42:49.200] [2025-09-24 07:42:49.200] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:42:50.297] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:42:58.090] SBL1:1210.0.1.0 [2025-09-24 07:42:58.122] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:42:59.705] SBL2:1210.0.1.0 [2025-09-24 07:42:59.737] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:42:59.849] j-A [2025-09-24 07:43:07.222] The R5 Autosar Classic is running [2025-09-24 07:43:07.222] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:43:07.222] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:43:07.830] INIT: version 2.96 booting [2025-09-24 07:43:07.925] INIT: Entering runlevel: 5 [2025-09-24 07:43:08.085] mtd24 attached [2025-09-24 07:43:08.101] mtd28 attached [2025-09-24 07:43:08.117] mtd32 attached [2025-09-24 07:43:08.149] ubi0:textures is mounted. [2025-09-24 07:43:08.165] RTNETLINK answers: File exists [2025-09-24 07:43:08.219] ubi1:animations is mounted. [2025-09-24 07:43:08.219] ubi2:dml_code is mounted. [2025-09-24 07:43:08.219] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:43:08.219] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:43:08.219] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:43:08.219] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:43:08.219] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:43:08.219] data.LB_FadeInType0=100 [2025-09-24 07:43:08.219] data.CHLH_FadeInType0=0 [2025-09-24 07:43:08.219] data.WU_FadeInDelay=0 [2025-09-24 07:43:08.219] max_time_out=0 [2025-09-24 07:43:08.219] No splash screen [2025-09-24 07:43:08.219] stop dss Done [2025-09-24 07:43:08.312] /dev/mem opened. [2025-09-24 07:43:08.312] Memory mapped at address 0xffff85ec2000. [2025-09-24 07:43:08.312] Read at address 0x00600018 (0xffff85ec2018): 0x00000000 [2025-09-24 07:43:08.312] Write at address 0x00600018 (0xffff85ec2018): 0x00400040, readback 0x00400040 [2025-09-24 07:43:08.312] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:43:08.312] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:43:08.536] Loaded PowerVR consumer services. [2025-09-24 07:43:08.568] Waiting data available... [2025-09-24 07:43:08.584] 512+0 records in [2025-09-24 07:43:08.584] 512+0 records out [2025-09-24 07:43:08.632] Starting syslogd/klogd: done [2025-09-24 07:43:08.648] DML Start [2025-09-24 07:43:08.840] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:43:09.048] DML res1: 0 [2025-09-24 07:43:09.489] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:43:09.489] Read Success [2025-09-24 07:43:09.489] Verifying certificate... [2025-09-24 07:43:09.729] Verified OK [2025-09-24 07:43:09.745] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:43:11.289] Verified OK [2025-09-24 07:43:11.289] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:43:11.934] Verified OK [2025-09-24 07:43:11.934] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:43:14.668] fs.protected_hardlinks = 1 [2025-09-24 07:43:14.684] fs.protected_symlinks = 1 [2025-09-24 07:43:14.684] kernel.modules_disabled = 1 [2025-09-24 07:43:14.875] [2025-09-24 07:43:14.875] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:43:16.139] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:43:23.816] SBL1:1210.0.1.0 [2025-09-24 07:43:23.864] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:43:25.431] SBL2:1210.0.1.0 [2025-09-24 07:43:25.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:43:25.575] j-A [2025-09-24 07:43:32.928] The R5 Autosar Classic is running [2025-09-24 07:43:32.951] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:43:32.951] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:43:33.559] INIT: version 2.96 booting [2025-09-24 07:43:33.671] INIT: Entering runlevel: 5 [2025-09-24 07:43:33.831] mtd28 attached [2025-09-24 07:43:33.847] mtd32 attached [2025-09-24 07:43:33.847] mtd24 attached [2025-09-24 07:43:33.895] RTNETLINK answers: File exists [2025-09-24 07:43:33.966] ubi0:animations is mounted. [2025-09-24 07:43:33.966] ubi1:dml_code is mounted. [2025-09-24 07:43:33.966] ubi2:textures is mounted. [2025-09-24 07:43:33.966] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:43:33.966] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:43:33.966] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:43:33.966] data.LB_FadeInType0=100 [2025-09-24 07:43:33.966] data.CHLH_FadeInType0=0 [2025-09-24 07:43:33.966] data.WU_FadeInDelay=0 [2025-09-24 07:43:33.966] max_time_out=0 [2025-09-24 07:43:33.966] No splash screen [2025-09-24 07:43:33.966] stop dss Done [2025-09-24 07:43:33.966] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:43:33.966] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:43:34.031] /dev/mem opened. [2025-09-24 07:43:34.031] Memory mapped at address 0xffff9f5d8000. [2025-09-24 07:43:34.031] Read at address 0x00600018 (0xffff9f5d8018): 0x00000000 [2025-09-24 07:43:34.031] Write at address 0x00600018 (0xffff9f5d8018): 0x00400040, readback 0x00400040 [2025-09-24 07:43:34.048] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:43:34.064] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:43:34.143] Loaded PowerVR consumer services. [2025-09-24 07:43:34.298] Waiting data available... [2025-09-24 07:43:34.298] 512+0 records in [2025-09-24 07:43:34.298] 512+0 records out [2025-09-24 07:43:34.346] Starting syslogd/klogd: done [2025-09-24 07:43:34.362] DML Start [2025-09-24 07:43:34.505] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:43:34.729] DML res1: 0 [2025-09-24 07:43:35.238] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:43:35.238] Read Success [2025-09-24 07:43:35.238] Verifying certificate... [2025-09-24 07:43:35.509] Verified OK [2025-09-24 07:43:35.525] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:43:37.152] Verified OK [2025-09-24 07:43:37.152] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:43:37.744] Verified OK [2025-09-24 07:43:37.744] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:43:40.302] fs.protected_hardlinks = 1 [2025-09-24 07:43:40.319] fs.protected_symlinks = 1 [2025-09-24 07:43:40.335] kernel.modules_disabled = 1 [2025-09-24 07:43:40.526] [2025-09-24 07:43:40.526] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:43:41.800] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:43:49.515] SBL1:1210.0.1.0 [2025-09-24 07:43:49.546] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:43:51.129] SBL2:1210.0.1.0 [2025-09-24 07:43:51.161] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:43:51.273] j-A [2025-09-24 07:43:58.626] The R5 Autosar Classic is running [2025-09-24 07:43:58.626] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:43:58.647] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:43:59.255] INIT: version 2.96 booting [2025-09-24 07:43:59.366] INIT: Entering runlevel: 5 [2025-09-24 07:43:59.511] mtd24 attached [2025-09-24 07:43:59.527] mtd28 attached [2025-09-24 07:43:59.543] mtd32 attached [2025-09-24 07:43:59.575] ubi0:textures is mounted. [2025-09-24 07:43:59.591] RTNETLINK answers: File exists [2025-09-24 07:43:59.644] ubi1:animations is mounted. [2025-09-24 07:43:59.644] ubi2:dml_code is mounted. [2025-09-24 07:43:59.644] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:43:59.644] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:43:59.644] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:43:59.644] data.LB_FadeInType0=100 [2025-09-24 07:43:59.644] data.CHLH_FadeInType0=0 [2025-09-24 07:43:59.644] data.WU_FadeInDelay=0 [2025-09-24 07:43:59.644] max_time_out=0 [2025-09-24 07:43:59.644] No splash screen [2025-09-24 07:43:59.644] stop dss Done [2025-09-24 07:43:59.644] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:43:59.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:43:59.710] /dev/mem opened. [2025-09-24 07:43:59.710] Memory mapped at address 0xffff95f10000. [2025-09-24 07:43:59.710] Read at address 0x00600018 (0xffff95f10018): 0x00000000 [2025-09-24 07:43:59.710] Write at address 0x00600018 (0xffff95f10018): 0x00400040, readback 0x00400040 [2025-09-24 07:43:59.726] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:43:59.742] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:43:59.935] Loaded PowerVR consumer services. [2025-09-24 07:43:59.982] 512+0 records in [2025-09-24 07:43:59.982] 512+0 records out [2025-09-24 07:43:59.998] Waiting data available... [2025-09-24 07:44:00.014] Starting syslogd/klogd: done [2025-09-24 07:44:00.030] DML Start [2025-09-24 07:44:00.222] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:44:00.494] DML res1: 0 [2025-09-24 07:44:00.798] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:44:00.814] Read Success [2025-09-24 07:44:00.814] Verifying certificate... [2025-09-24 07:44:01.038] Verified OK [2025-09-24 07:44:01.054] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:44:02.737] Verified OK [2025-09-24 07:44:02.737] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:44:03.329] Verified OK [2025-09-24 07:44:03.329] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:44:05.791] fs.protected_hardlinks = 1 [2025-09-24 07:44:05.807] fs.protected_symlinks = 1 [2025-09-24 07:44:05.807] kernel.modules_disabled = 1 [2025-09-24 07:44:05.998] [2025-09-24 07:44:05.998] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:44:07.550] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:44:15.230] SBL1:1210.0.1.0 [2025-09-24 07:44:15.278] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:44:16.845] SBL2:1210.0.1.0 [2025-09-24 07:44:16.892] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:44:16.988] j-A [2025-09-24 07:44:24.342] The R5 Autosar Classic is running [2025-09-24 07:44:24.363] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:44:24.363] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:44:24.971] INIT: version 2.96 booting [2025-09-24 07:44:25.082] INIT: Entering runlevel: 5 [2025-09-24 07:44:25.226] mtd28 attached [2025-09-24 07:44:25.242] mtd32 attached [2025-09-24 07:44:25.258] mtd24 attached [2025-09-24 07:44:25.290] ubi0:animations is mounted. [2025-09-24 07:44:25.306] RTNETLINK answers: File exists [2025-09-24 07:44:25.367] ubi2:textures is mounted. [2025-09-24 07:44:25.367] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:44:25.367] ubi1:dml_code is mounted. [2025-09-24 07:44:25.367] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:44:25.367] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:44:25.367] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:44:25.367] data.LB_FadeInType0=100 [2025-09-24 07:44:25.367] data.CHLH_FadeInType0=0 [2025-09-24 07:44:25.367] data.WU_FadeInDelay=0 [2025-09-24 07:44:25.367] max_time_out=0 [2025-09-24 07:44:25.367] No splash screen [2025-09-24 07:44:25.367] stop dss Done [2025-09-24 07:44:25.367] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:44:25.439] /dev/mem opened. [2025-09-24 07:44:25.439] Memory mapped at address 0xffff8da49000. [2025-09-24 07:44:25.439] Read at address 0x00600018 (0xffff8da49018): 0x00000000 [2025-09-24 07:44:25.439] Write at address 0x00600018 (0xffff8da49018): 0x00400040, readback 0x00400040 [2025-09-24 07:44:25.454] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:44:25.485] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:44:25.549] Loaded PowerVR consumer services. [2025-09-24 07:44:25.717] Waiting data available... [2025-09-24 07:44:25.717] 512+0 records in [2025-09-24 07:44:25.717] 512+0 records out [2025-09-24 07:44:25.749] Starting syslogd/klogd: done [2025-09-24 07:44:25.781] DML Start [2025-09-24 07:44:25.958] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:44:26.165] DML res1: 0 [2025-09-24 07:44:26.597] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:44:26.618] Read Success [2025-09-24 07:44:26.618] Verifying certificate... [2025-09-24 07:44:26.842] Verified OK [2025-09-24 07:44:26.858] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:44:28.473] Verified OK [2025-09-24 07:44:28.489] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:44:29.120] Verified OK [2025-09-24 07:44:29.120] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:44:31.838] fs.protected_hardlinks = 1 [2025-09-24 07:44:31.854] fs.protected_symlinks = 1 [2025-09-24 07:44:31.854] kernel.modules_disabled = 1 [2025-09-24 07:44:32.062] [2025-09-24 07:44:32.062] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:44:33.269] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:44:40.929] SBL1:1210.0.1.0 [2025-09-24 07:44:40.977] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:44:42.544] SBL2:1210.0.1.0 [2025-09-24 07:44:42.592] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:44:42.688] j-A [2025-09-24 07:44:50.042] The R5 Autosar Classic is running [2025-09-24 07:44:50.067] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:44:50.067] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:44:50.673] INIT: version 2.96 booting [2025-09-24 07:44:50.786] INIT: Entering runlevel: 5 [2025-09-24 07:44:50.945] mtd32 attached [2025-09-24 07:44:50.945] mtd24 attached [2025-09-24 07:44:50.961] mtd28 attached [2025-09-24 07:44:50.994] RTNETLINK answers: File exists [2025-09-24 07:44:51.046] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:44:51.046] ubi0:dml_code is mounted. [2025-09-24 07:44:51.046] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:44:51.046] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:44:51.046] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:44:51.046] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:44:51.046] ubi2:animations is mounted. [2025-09-24 07:44:51.046] ubi1:textures is mounted. [2025-09-24 07:44:51.096] data.LB_FadeInType0=100 [2025-09-24 07:44:51.096] data.CHLH_FadeInType0=0 [2025-09-24 07:44:51.096] data.WU_FadeInDelay=0 [2025-09-24 07:44:51.096] max_time_out=0 [2025-09-24 07:44:51.096] No splash screen [2025-09-24 07:44:51.096] stop dss Done [2025-09-24 07:44:51.096] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:44:51.096] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:44:51.128] /dev/mem opened. [2025-09-24 07:44:51.128] Memory mapped at address 0xffffbcc1d000. [2025-09-24 07:44:51.154] Read at address 0x00600018 (0xffffbcc1d018): 0x00000000 [2025-09-24 07:44:51.154] Write at address 0x00600018 (0xffffbcc1d018): 0x00400040, readback 0x00400040 [2025-09-24 07:44:51.251] Loaded PowerVR consumer services. [2025-09-24 07:44:51.394] Waiting data available... [2025-09-24 07:44:51.394] 512+0 records in [2025-09-24 07:44:51.411] 512+0 records out [2025-09-24 07:44:51.427] Starting syslogd/klogd: done [2025-09-24 07:44:51.443] DML Start [2025-09-24 07:44:51.602] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:44:51.810] DML res1: 0 [2025-09-24 07:44:52.289] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:44:52.310] Read Success [2025-09-24 07:44:52.310] Verifying certificate... [2025-09-24 07:44:52.550] Verified OK [2025-09-24 07:44:52.566] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:44:54.197] Verified OK [2025-09-24 07:44:54.197] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:44:54.834] Verified OK [2025-09-24 07:44:54.834] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:44:57.407] fs.protected_hardlinks = 1 [2025-09-24 07:44:57.423] fs.protected_symlinks = 1 [2025-09-24 07:44:57.423] kernel.modules_disabled = 1 [2025-09-24 07:44:57.631] [2025-09-24 07:44:57.631] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:44:58.890] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:45:06.654] SBL1:1210.0.1.0 [2025-09-24 07:45:06.702] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:45:08.269] SBL2:1210.0.1.0 [2025-09-24 07:45:08.317] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:45:08.413] j-A [2025-09-24 07:45:15.767] The R5 Autosar Classic is running [2025-09-24 07:45:15.787] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:45:15.787] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:45:16.395] INIT: version 2.96 booting [2025-09-24 07:45:16.506] INIT: Entering runlevel: 5 [2025-09-24 07:45:16.667] mtd24 attached [2025-09-24 07:45:16.683] mtd32 attached [2025-09-24 07:45:16.698] mtd28 attached [2025-09-24 07:45:16.698] ubi0:textures is mounted. [2025-09-24 07:45:16.730] ubi1:dml_code is mounted. [2025-09-24 07:45:16.746] RTNETLINK answers: File exists [2025-09-24 07:45:16.746] ubi2:animations is mounted. [2025-09-24 07:45:16.804] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:45:16.804] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:45:16.804] data.LB_FadeInType0=100 [2025-09-24 07:45:16.804] data.CHLH_FadeInType0=0 [2025-09-24 07:45:16.804] data.WU_FadeInDelay=0 [2025-09-24 07:45:16.804] max_time_out=0 [2025-09-24 07:45:16.804] No splash screen [2025-09-24 07:45:16.804] stop dss Done [2025-09-24 07:45:16.804] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:45:16.804] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:45:16.804] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:45:16.836] /dev/mem opened. [2025-09-24 07:45:16.862] Memory mapped at address 0xffff97fc1000. [2025-09-24 07:45:16.862] Read at address 0x00600018 (0xffff97fc1018): 0x00000000 [2025-09-24 07:45:16.862] Write at address 0x00600018 (0xffff97fc1018): 0x00400040, readback 0x00400040 [2025-09-24 07:45:16.878] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:45:16.893] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:45:16.989] Loaded PowerVR consumer services. [2025-09-24 07:45:17.141] Waiting data available... [2025-09-24 07:45:17.141] 512+0 records in [2025-09-24 07:45:17.141] 512+0 records out [2025-09-24 07:45:17.173] Starting syslogd/klogd: done [2025-09-24 07:45:17.206] DML Start [2025-09-24 07:45:17.349] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:45:17.588] DML res1: 0 [2025-09-24 07:45:18.044] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:45:18.044] Read Success [2025-09-24 07:45:18.044] Verifying certificate... [2025-09-24 07:45:18.268] Verified OK [2025-09-24 07:45:18.268] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:45:19.835] Verified OK [2025-09-24 07:45:19.835] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:45:20.441] Verified OK [2025-09-24 07:45:20.441] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:45:23.284] fs.protected_hardlinks = 1 [2025-09-24 07:45:23.284] fs.protected_symlinks = 1 [2025-09-24 07:45:23.284] kernel.modules_disabled = 1 [2025-09-24 07:45:23.475] [2025-09-24 07:45:23.475] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:45:24.684] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:45:32.343] SBL1:1210.0.1.0 [2025-09-24 07:45:32.391] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:45:33.957] SBL2:1210.0.1.0 [2025-09-24 07:45:34.006] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:45:34.102] j-A [2025-09-24 07:45:41.456] The R5 Autosar Classic is running [2025-09-24 07:45:41.481] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:45:41.481] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:45:42.088] INIT: version 2.96 booting [2025-09-24 07:45:42.200] INIT: Entering runlevel: 5 [2025-09-24 07:45:42.344] mtd24 attached [2025-09-24 07:45:42.360] mtd28 attached [2025-09-24 07:45:42.376] mtd32 attached [2025-09-24 07:45:42.391] ubi0:textures is mounted. [2025-09-24 07:45:42.424] RTNETLINK answers: File exists [2025-09-24 07:45:42.424] ubi2:dml_code is mounted. [2025-09-24 07:45:42.480] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:45:42.480] ubi1:animations is mounted. [2025-09-24 07:45:42.480] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:45:42.480] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:45:42.480] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:45:42.480] data.LB_FadeInType0=100 [2025-09-24 07:45:42.480] data.CHLH_FadeInType0=0 [2025-09-24 07:45:42.480] data.WU_FadeInDelay=0 [2025-09-24 07:45:42.480] max_time_out=0 [2025-09-24 07:45:42.480] No splash screen [2025-09-24 07:45:42.480] stop dss Done [2025-09-24 07:45:42.480] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:45:42.528] /dev/mem opened. [2025-09-24 07:45:42.528] Memory mapped at address 0xffffa6112000. [2025-09-24 07:45:42.564] Read at address 0x00600018 (0xffffa6112018): 0x00000000 [2025-09-24 07:45:42.564] Write at address 0x00600018 (0xffffa6112018): 0x00400040, readback 0x00400040 [2025-09-24 07:45:42.564] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:45:42.564] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:45:42.787] Loaded PowerVR consumer services. [2025-09-24 07:45:42.860] Waiting data available... [2025-09-24 07:45:42.860] 512+0 records in [2025-09-24 07:45:42.860] 512+0 records out [2025-09-24 07:45:42.877] Starting syslogd/klogd: done [2025-09-24 07:45:42.893] DML Start [2025-09-24 07:45:43.068] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:45:43.308] DML res1: 0 [2025-09-24 07:45:43.739] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:45:43.739] Read Success [2025-09-24 07:45:43.755] Verifying certificate... [2025-09-24 07:45:44.011] Verified OK [2025-09-24 07:45:44.027] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:45:45.684] Verified OK [2025-09-24 07:45:45.684] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:45:46.225] Verified OK [2025-09-24 07:45:46.225] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:45:48.782] fs.protected_hardlinks = 1 [2025-09-24 07:45:48.798] fs.protected_symlinks = 1 [2025-09-24 07:45:48.798] kernel.modules_disabled = 1 [2025-09-24 07:45:48.990] [2025-09-24 07:45:48.990] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:45:50.349] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:45:58.074] SBL1:1210.0.1.0 [2025-09-24 07:45:58.122] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:45:59.689] SBL2:1210.0.1.0 [2025-09-24 07:45:59.721] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:45:59.833] j-A [2025-09-24 07:46:07.188] The R5 Autosar Classic is running [2025-09-24 07:46:07.188] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:46:07.209] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:46:07.816] INIT: version 2.96 booting [2025-09-24 07:46:07.928] INIT: Entering runlevel: 5 [2025-09-24 07:46:08.088] mtd28 attached [2025-09-24 07:46:08.104] mtd32 attached [2025-09-24 07:46:08.104] mtd24 attached [2025-09-24 07:46:08.152] RTNETLINK answers: File exists [2025-09-24 07:46:08.152] ubi0:animations is mounted. [2025-09-24 07:46:08.213] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:46:08.213] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:46:08.213] ubi2:textures is mounted. [2025-09-24 07:46:08.213] ubi1:dml_code is mounted. [2025-09-24 07:46:08.213] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:46:08.213] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:46:08.213] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:46:08.213] data.LB_FadeInType0=100 [2025-09-24 07:46:08.213] data.CHLH_FadeInType0=0 [2025-09-24 07:46:08.213] data.WU_FadeInDelay=0 [2025-09-24 07:46:08.213] max_time_out=0 [2025-09-24 07:46:08.213] No splash screen [2025-09-24 07:46:08.213] stop dss Done [2025-09-24 07:46:08.278] /dev/mem opened. [2025-09-24 07:46:08.278] Memory mapped at address 0xffff9322b000. [2025-09-24 07:46:08.317] Read at address 0x00600018 (0xffff9322b018): 0x00000000 [2025-09-24 07:46:08.317] Write at address 0x00600018 (0xffff9322b018): 0x00400040, readback 0x00400040 [2025-09-24 07:46:08.317] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:46:08.317] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:46:08.493] Loaded PowerVR consumer services. [2025-09-24 07:46:08.589] Waiting data available... [2025-09-24 07:46:08.589] 512+0 records in [2025-09-24 07:46:08.604] 512+0 records out [2025-09-24 07:46:08.636] Starting syslogd/klogd: done [2025-09-24 07:46:08.653] DML Start [2025-09-24 07:46:08.860] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:46:09.037] DML res1: 0 [2025-09-24 07:46:09.530] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:46:09.530] Read Success [2025-09-24 07:46:09.530] Verifying certificate... [2025-09-24 07:46:09.802] Verified OK [2025-09-24 07:46:09.834] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:46:11.497] Verified OK [2025-09-24 07:46:11.513] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:46:12.083] Verified OK [2025-09-24 07:46:12.083] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:46:14.514] fs.protected_hardlinks = 1 [2025-09-24 07:46:14.530] fs.protected_symlinks = 1 [2025-09-24 07:46:14.530] kernel.modules_disabled = 1 [2025-09-24 07:46:14.738] [2025-09-24 07:46:14.738] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:46:16.061] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:46:23.783] SBL1:1210.0.1.0 [2025-09-24 07:46:23.831] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:46:25.397] SBL2:1210.0.1.0 [2025-09-24 07:46:25.445] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:46:25.541] j-A [2025-09-24 07:46:32.895] The R5 Autosar Classic is running [2025-09-24 07:46:32.920] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:46:32.920] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:46:33.527] INIT: version 2.96 booting [2025-09-24 07:46:33.638] INIT: Entering runlevel: 5 [2025-09-24 07:46:33.799] mtd32 attached [2025-09-24 07:46:33.814] mtd28 attached [2025-09-24 07:46:33.814] mtd24 attached [2025-09-24 07:46:33.862] ubi0:dml_code is mounted. [2025-09-24 07:46:33.878] RTNETLINK answers: File exists [2025-09-24 07:46:33.878] ubi1:animations is mounted. [2025-09-24 07:46:33.909] ubi2:textures is mounted. [2025-09-24 07:46:33.909] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:46:33.909] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:46:33.909] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:46:33.909] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:46:33.939] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:46:33.939] data.LB_FadeInType0=100 [2025-09-24 07:46:33.939] data.CHLH_FadeInType0=0 [2025-09-24 07:46:33.939] data.WU_FadeInDelay=0 [2025-09-24 07:46:33.939] max_time_out=0 [2025-09-24 07:46:33.939] No splash screen [2025-09-24 07:46:33.939] stop dss Done [2025-09-24 07:46:33.987] /dev/mem opened. [2025-09-24 07:46:33.987] Memory mapped at address 0xffff86fff000. [2025-09-24 07:46:34.014] Read at address 0x00600018 (0xffff86fff018): 0x00000000 [2025-09-24 07:46:34.014] Write at address 0x00600018 (0xffff86fff018): 0x00400040, readback 0x00400040 [2025-09-24 07:46:34.030] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:46:34.046] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:46:34.109] Loaded PowerVR consumer services. [2025-09-24 07:46:34.254] 512+0 records in [2025-09-24 07:46:34.254] 512+0 records out [2025-09-24 07:46:34.270] Waiting data available... [2025-09-24 07:46:34.285] Starting syslogd/klogd: done [2025-09-24 07:46:34.301] DML Start [2025-09-24 07:46:34.461] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:46:34.685] DML res1: 0 [2025-09-24 07:46:35.133] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:46:35.133] Read Success [2025-09-24 07:46:35.149] Verifying certificate... [2025-09-24 07:46:35.436] Verified OK [2025-09-24 07:46:35.452] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:46:37.051] Verified OK [2025-09-24 07:46:37.051] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:46:37.706] Verified OK [2025-09-24 07:46:37.706] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:46:40.312] fs.protected_hardlinks = 1 [2025-09-24 07:46:40.312] fs.protected_symlinks = 1 [2025-09-24 07:46:40.328] kernel.modules_disabled = 1 [2025-09-24 07:46:40.520] [2025-09-24 07:46:40.520] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:46:41.747] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:46:49.504] SBL1:1210.0.1.0 [2025-09-24 07:46:49.552] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:46:51.119] SBL2:1210.0.1.0 [2025-09-24 07:46:51.167] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:46:51.263] j-A [2025-09-24 07:46:58.618] The R5 Autosar Classic is running [2025-09-24 07:46:58.641] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:46:58.642] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:46:59.249] INIT: version 2.96 booting [2025-09-24 07:46:59.361] INIT: Entering runlevel: 5 [2025-09-24 07:46:59.521] mtd32 attached [2025-09-24 07:46:59.521] mtd24 attached [2025-09-24 07:46:59.537] mtd28 attached [2025-09-24 07:46:59.569] ubi0:dml_code is mounted. [2025-09-24 07:46:59.585] ubi1:textures is mounted. [2025-09-24 07:46:59.601] RTNETLINK answers: File exists [2025-09-24 07:46:59.601] ubi2:animations is mounted. [2025-09-24 07:46:59.651] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:46:59.651] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:46:59.651] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:46:59.651] data.LB_FadeInType0=100 [2025-09-24 07:46:59.651] data.CHLH_FadeInType0=0 [2025-09-24 07:46:59.651] data.WU_FadeInDelay=0 [2025-09-24 07:46:59.651] max_time_out=0 [2025-09-24 07:46:59.651] No splash screen [2025-09-24 07:46:59.651] stop dss Done [2025-09-24 07:46:59.651] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:46:59.651] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:46:59.684] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:46:59.717] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:46:59.717] /dev/mem opened. [2025-09-24 07:46:59.717] Memory mapped at address 0xffffb15bc000. [2025-09-24 07:46:59.717] Read at address 0x00600018 (0xffffb15bc018): 0x00000000 [2025-09-24 07:46:59.717] Write at address 0x00600018 (0xffffb15bc018): 0x00400040, readback 0x00400040 [2025-09-24 07:46:59.828] Loaded PowerVR consumer services. [2025-09-24 07:46:59.988] Waiting data available... [2025-09-24 07:47:00.004] 512+0 records in [2025-09-24 07:47:00.004] 512+0 records out [2025-09-24 07:47:00.037] Starting syslogd/klogd: done [2025-09-24 07:47:00.053] DML Start [2025-09-24 07:47:00.244] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:47:00.484] DML res1: 0 [2025-09-24 07:47:00.922] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:47:00.922] Read Success [2025-09-24 07:47:00.922] Verifying certificate... [2025-09-24 07:47:01.210] Verified OK [2025-09-24 07:47:01.226] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:47:02.712] Verified OK [2025-09-24 07:47:02.712] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:47:03.359] Verified OK [2025-09-24 07:47:03.359] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:47:06.045] fs.protected_hardlinks = 1 [2025-09-24 07:47:06.061] fs.protected_symlinks = 1 [2025-09-24 07:47:06.061] kernel.modules_disabled = 1 [2025-09-24 07:47:06.253] [2025-09-24 07:47:06.253] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:47:07.523] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:47:15.216] SBL1:1210.0.1.0 [2025-09-24 07:47:15.247] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:47:16.830] SBL2:1210.0.1.0 [2025-09-24 07:47:16.862] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:47:16.975] j-A [2025-09-24 07:47:24.348] The R5 Autosar Classic is running [2025-09-24 07:47:24.348] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:47:24.348] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:47:24.956] INIT: version 2.96 booting [2025-09-24 07:47:25.068] INIT: Entering runlevel: 5 [2025-09-24 07:47:25.211] mtd28 attached [2025-09-24 07:47:25.227] mtd32 attached [2025-09-24 07:47:25.243] mtd24 attached [2025-09-24 07:47:25.325] RTNETLINK answers: File exists [2025-09-24 07:47:25.325] ubi0:animations is mounted. [2025-09-24 07:47:25.325] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:47:25.325] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:47:25.325] ubi2:textures is mounted. [2025-09-24 07:47:25.325] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:47:25.325] ubi1:dml_code is mounted. [2025-09-24 07:47:25.325] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:47:25.325] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:47:25.341] data.LB_FadeInType0=100 [2025-09-24 07:47:25.341] data.CHLH_FadeInType0=0 [2025-09-24 07:47:25.341] data.WU_FadeInDelay=0 [2025-09-24 07:47:25.362] max_time_out=0 [2025-09-24 07:47:25.362] No splash screen [2025-09-24 07:47:25.362] stop dss Done [2025-09-24 07:47:25.362] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:47:25.385] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:47:25.435] /dev/mem opened. [2025-09-24 07:47:25.435] Memory mapped at address 0xffffa15b8000. [2025-09-24 07:47:25.435] Read at address 0x00600018 (0xffffa15b8018): 0x00000000 [2025-09-24 07:47:25.435] Write at address 0x00600018 (0xffffa15b8018): 0x00400040, readback 0x00400040 [2025-09-24 07:47:25.499] Loaded PowerVR consumer services. [2025-09-24 07:47:25.674] Waiting data available... [2025-09-24 07:47:25.690] 512+0 records in [2025-09-24 07:47:25.690] 512+0 records out [2025-09-24 07:47:25.722] Starting syslogd/klogd: done [2025-09-24 07:47:25.738] DML Start [2025-09-24 07:47:25.914] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:47:26.154] DML res1: 0 [2025-09-24 07:47:26.570] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:47:26.591] Read Success [2025-09-24 07:47:26.591] Verifying certificate... [2025-09-24 07:47:26.831] Verified OK [2025-09-24 07:47:26.846] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:47:28.389] Verified OK [2025-09-24 07:47:28.389] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:47:29.060] Verified OK [2025-09-24 07:47:29.060] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:47:31.823] fs.protected_hardlinks = 1 [2025-09-24 07:47:31.823] fs.protected_symlinks = 1 [2025-09-24 07:47:31.823] kernel.modules_disabled = 1 [2025-09-24 07:47:31.999] [2025-09-24 07:47:31.999] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:47:33.239] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:47:40.938] SBL1:1210.0.1.0 [2025-09-24 07:47:40.986] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:47:42.554] SBL2:1210.0.1.0 [2025-09-24 07:47:42.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:47:42.713] j-A [2025-09-24 07:47:50.052] The R5 Autosar Classic is running [2025-09-24 07:47:50.077] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:47:50.077] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:47:50.684] INIT: version 2.96 booting [2025-09-24 07:47:50.796] INIT: Entering runlevel: 5 [2025-09-24 07:47:50.956] mtd32 attached [2025-09-24 07:47:50.956] mtd24 attached [2025-09-24 07:47:50.972] mtd28 attached [2025-09-24 07:47:51.004] ubi0:dml_code is mounted. [2025-09-24 07:47:51.021] RTNETLINK answers: File exists [2025-09-24 07:47:51.056] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:47:51.056] ubi1:textures is mounted. [2025-09-24 07:47:51.056] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:47:51.056] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:47:51.056] ubi2:animations is mounted. [2025-09-24 07:47:51.056] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:47:51.056] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:47:51.081] data.LB_FadeInType0=100 [2025-09-24 07:47:51.081] data.CHLH_FadeInType0=0 [2025-09-24 07:47:51.081] data.WU_FadeInDelay=0 [2025-09-24 07:47:51.081] max_time_out=0 [2025-09-24 07:47:51.081] No splash screen [2025-09-24 07:47:51.081] stop dss Done [2025-09-24 07:47:51.157] /dev/mem opened. [2025-09-24 07:47:51.157] Memory mapped at address 0xffffbdc03000. [2025-09-24 07:47:51.157] Read at address 0x00600018 (0xffffbdc03018): 0x00000000 [2025-09-24 07:47:51.157] Write at address 0x00600018 (0xffffbdc03018): 0x00400040, readback 0x00400040 [2025-09-24 07:47:51.157] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:47:51.157] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:47:51.365] Loaded PowerVR consumer services. [2025-09-24 07:47:51.429] Waiting data available... [2025-09-24 07:47:51.445] 512+0 records in [2025-09-24 07:47:51.445] 512+0 records out [2025-09-24 07:47:51.477] Starting syslogd/klogd: done [2025-09-24 07:47:51.493] DML Start [2025-09-24 07:47:51.668] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:47:51.908] DML res1: 0 [2025-09-24 07:47:52.292] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:47:52.309] Read Success [2025-09-24 07:47:52.309] Verifying certificate... [2025-09-24 07:47:52.549] Verified OK [2025-09-24 07:47:52.581] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:47:54.097] Verified OK [2025-09-24 07:47:54.097] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:47:54.794] Verified OK [2025-09-24 07:47:54.794] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:47:57.512] fs.protected_hardlinks = 1 [2025-09-24 07:47:57.528] fs.protected_symlinks = 1 [2025-09-24 07:47:57.528] kernel.modules_disabled = 1 [2025-09-24 07:47:57.735] [2025-09-24 07:47:57.735] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:47:58.998] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:48:06.668] SBL1:1210.0.1.0 [2025-09-24 07:48:06.700] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:48:08.282] SBL2:1210.0.1.0 [2025-09-24 07:48:08.314] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:48:08.426] j-A [2025-09-24 07:48:15.798] The R5 Autosar Classic is running [2025-09-24 07:48:15.798] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:48:15.798] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:48:16.405] INIT: version 2.96 booting [2025-09-24 07:48:16.517] INIT: Entering runlevel: 5 [2025-09-24 07:48:16.661] mtd28 attached [2025-09-24 07:48:16.677] mtd32 attached [2025-09-24 07:48:16.677] mtd24 attached [2025-09-24 07:48:16.741] RTNETLINK answers: File exists [2025-09-24 07:48:16.803] ubi0:animations is mounted. [2025-09-24 07:48:16.803] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:48:16.803] ubi2:textures is mounted. [2025-09-24 07:48:16.803] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:48:16.803] ubi1:dml_code is mounted. [2025-09-24 07:48:16.803] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:48:16.803] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:48:16.803] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:48:16.803] data.LB_FadeInType0=100 [2025-09-24 07:48:16.803] data.CHLH_FadeInType0=0 [2025-09-24 07:48:16.803] data.WU_FadeInDelay=0 [2025-09-24 07:48:16.803] max_time_out=0 [2025-09-24 07:48:16.803] No splash screen [2025-09-24 07:48:16.803] stop dss Done [2025-09-24 07:48:16.845] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:48:16.845] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:48:16.885] /dev/mem opened. [2025-09-24 07:48:16.885] Memory mapped at address 0xffffa0c97000. [2025-09-24 07:48:16.885] Read at address 0x00600018 (0xffffa0c97018): 0x00000000 [2025-09-24 07:48:16.885] Write at address 0x00600018 (0xffffa0c97018): 0x00400040, readback 0x00400040 [2025-09-24 07:48:17.013] Loaded PowerVR consumer services. [2025-09-24 07:48:17.152] Waiting data available... [2025-09-24 07:48:17.152] 512+0 records in [2025-09-24 07:48:17.152] 512+0 records out [2025-09-24 07:48:17.183] Starting syslogd/klogd: done [2025-09-24 07:48:17.199] DML Start [2025-09-24 07:48:17.376] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:48:17.583] DML res1: 0 [2025-09-24 07:48:18.058] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:48:18.058] Read Success [2025-09-24 07:48:18.058] Verifying certificate... [2025-09-24 07:48:18.298] Verified OK [2025-09-24 07:48:18.298] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:48:19.961] Verified OK [2025-09-24 07:48:19.961] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:48:20.621] Verified OK [2025-09-24 07:48:20.621] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:48:23.243] fs.protected_hardlinks = 1 [2025-09-24 07:48:23.243] fs.protected_symlinks = 1 [2025-09-24 07:48:23.260] kernel.modules_disabled = 1 [2025-09-24 07:48:23.452] [2025-09-24 07:48:23.452] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:48:24.658] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:48:32.388] SBL1:1210.0.1.0 [2025-09-24 07:48:32.420] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:48:34.003] SBL2:1210.0.1.0 [2025-09-24 07:48:34.035] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:48:34.147] j-A [2025-09-24 07:48:41.517] The R5 Autosar Classic is running [2025-09-24 07:48:41.517] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:48:41.517] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:48:42.126] INIT: version 2.96 booting [2025-09-24 07:48:42.237] INIT: Entering runlevel: 5 [2025-09-24 07:48:42.381] mtd32 attached [2025-09-24 07:48:42.397] mtd24 attached [2025-09-24 07:48:42.397] mtd28 attached [2025-09-24 07:48:42.491] RTNETLINK answers: File exists [2025-09-24 07:48:42.491] ubi1:textures is mounted. [2025-09-24 07:48:42.491] ubi2:animations is mounted. [2025-09-24 07:48:42.491] ubi0:dml_code is mounted. [2025-09-24 07:48:42.491] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:48:42.491] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:48:42.491] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:48:42.491] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:48:42.519] data.LB_FadeInType0=100 [2025-09-24 07:48:42.519] data.CHLH_FadeInType0=0 [2025-09-24 07:48:42.519] data.WU_FadeInDelay=0 [2025-09-24 07:48:42.519] max_time_out=0 [2025-09-24 07:48:42.519] No splash screen [2025-09-24 07:48:42.519] stop dss Done [2025-09-24 07:48:42.519] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:48:42.592] /dev/mem opened. [2025-09-24 07:48:42.592] Memory mapped at address 0xffff885b5000. [2025-09-24 07:48:42.592] Read at address 0x00600018 (0xffff885b5018): 0x00000000 [2025-09-24 07:48:42.592] Write at address 0x00600018 (0xffff885b5018): 0x00400040, readback 0x00400040 [2025-09-24 07:48:42.592] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:48:42.592] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:48:42.736] Loaded PowerVR consumer services. [2025-09-24 07:48:42.876] Waiting data available... [2025-09-24 07:48:42.876] 512+0 records in [2025-09-24 07:48:42.876] 512+0 records out [2025-09-24 07:48:42.891] Starting syslogd/klogd: done [2025-09-24 07:48:42.907] DML Start [2025-09-24 07:48:43.116] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:48:43.340] DML res1: 0 [2025-09-24 07:48:43.752] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:48:43.752] Read Success [2025-09-24 07:48:43.752] Verifying certificate... [2025-09-24 07:48:43.992] Verified OK [2025-09-24 07:48:44.007] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:48:45.696] Verified OK [2025-09-24 07:48:45.696] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:48:46.319] Verified OK [2025-09-24 07:48:46.319] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:48:48.829] fs.protected_hardlinks = 1 [2025-09-24 07:48:48.829] fs.protected_symlinks = 1 [2025-09-24 07:48:48.845] kernel.modules_disabled = 1 [2025-09-24 07:48:49.037] [2025-09-24 07:48:49.037] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:48:50.395] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:48:58.100] SBL1:1210.0.1.0 [2025-09-24 07:48:58.148] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:48:59.715] SBL2:1210.0.1.0 [2025-09-24 07:48:59.763] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:48:59.858] j-A [2025-09-24 07:49:07.213] The R5 Autosar Classic is running [2025-09-24 07:49:07.235] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:49:07.235] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:49:07.842] INIT: version 2.96 booting [2025-09-24 07:49:07.953] INIT: Entering runlevel: 5 [2025-09-24 07:49:08.098] mtd24 attached [2025-09-24 07:49:08.114] mtd32 attached [2025-09-24 07:49:08.130] mtd28 attached [2025-09-24 07:49:08.162] ubi0:textures is mounted. [2025-09-24 07:49:08.178] RTNETLINK answers: File exists [2025-09-24 07:49:08.235] ubi2:animations is mounted. [2025-09-24 07:49:08.235] ubi1:dml_code is mounted. [2025-09-24 07:49:08.235] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:49:08.235] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:49:08.235] data.LB_FadeInType0=100 [2025-09-24 07:49:08.235] data.CHLH_FadeInType0=0 [2025-09-24 07:49:08.235] data.WU_FadeInDelay=0 [2025-09-24 07:49:08.235] max_time_out=0 [2025-09-24 07:49:08.235] No splash screen [2025-09-24 07:49:08.235] stop dss Done [2025-09-24 07:49:08.235] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:49:08.235] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:49:08.235] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:49:08.306] /dev/mem opened. [2025-09-24 07:49:08.306] Memory mapped at address 0xffff857c6000. [2025-09-24 07:49:08.306] Read at address 0x00600018 (0xffff857c6018): 0x00000000 [2025-09-24 07:49:08.306] Write at address 0x00600018 (0xffff857c6018): 0x00400040, readback 0x00400040 [2025-09-24 07:49:08.306] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:49:08.323] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:49:08.547] Loaded PowerVR consumer services. [2025-09-24 07:49:08.547] Waiting data available... [2025-09-24 07:49:08.579] 512+0 records in [2025-09-24 07:49:08.579] 512+0 records out [2025-09-24 07:49:08.627] Starting syslogd/klogd: done [2025-09-24 07:49:08.642] DML Start [2025-09-24 07:49:08.834] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:49:09.058] DML res1: 0 [2025-09-24 07:49:09.452] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:49:09.452] Read Success [2025-09-24 07:49:09.452] Verifying certificate... [2025-09-24 07:49:09.691] Verified OK [2025-09-24 07:49:09.707] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:49:11.386] Verified OK [2025-09-24 07:49:11.386] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:49:12.005] Verified OK [2025-09-24 07:49:12.005] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:49:14.548] fs.protected_hardlinks = 1 [2025-09-24 07:49:14.548] fs.protected_symlinks = 1 [2025-09-24 07:49:14.563] kernel.modules_disabled = 1 [2025-09-24 07:49:14.754] [2025-09-24 07:49:14.754] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:49:16.150] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:49:23.828] SBL1:1210.0.1.0 [2025-09-24 07:49:23.876] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:49:25.443] SBL2:1210.0.1.0 [2025-09-24 07:49:25.491] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:49:25.602] j-A [2025-09-24 07:49:32.940] The R5 Autosar Classic is running [2025-09-24 07:49:32.971] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:49:32.971] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:49:33.578] INIT: version 2.96 booting [2025-09-24 07:49:33.691] INIT: Entering runlevel: 5 [2025-09-24 07:49:33.850] mtd24 attached [2025-09-24 07:49:33.850] mtd28 attached [2025-09-24 07:49:33.866] mtd32 attached [2025-09-24 07:49:33.914] ubi0:textures is mounted. [2025-09-24 07:49:33.976] ubi1:animations is mounted. [2025-09-24 07:49:33.976] RTNETLINK answers: File exists [2025-09-24 07:49:33.976] ubi2:dml_code is mounted. [2025-09-24 07:49:33.976] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:49:33.976] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:49:33.976] data.LB_FadeInType0=100 [2025-09-24 07:49:33.976] data.CHLH_FadeInType0=0 [2025-09-24 07:49:33.976] data.WU_FadeInDelay=0 [2025-09-24 07:49:33.976] max_time_out=0 [2025-09-24 07:49:33.976] No splash screen [2025-09-24 07:49:33.976] stop dss Done [2025-09-24 07:49:33.976] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:49:33.976] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:49:33.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:49:34.045] /dev/mem opened. [2025-09-24 07:49:34.045] Memory mapped at address 0xffff96db7000. [2025-09-24 07:49:34.045] Read at address 0x00600018 (0xffff96db7018): 0x00000000 [2025-09-24 07:49:34.045] Write at address 0x00600018 (0xffff96db7018): 0x00400040, readback 0x00400040 [2025-09-24 07:49:34.072] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:49:34.072] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:49:34.280] Loaded PowerVR consumer services. [2025-09-24 07:49:34.327] 512+0 records in [2025-09-24 07:49:34.327] 512+0 records out [2025-09-24 07:49:34.327] Waiting data available... [2025-09-24 07:49:34.376] Starting syslogd/klogd: done [2025-09-24 07:49:34.392] DML Start [2025-09-24 07:49:34.536] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:49:34.792] DML res1: 0 [2025-09-24 07:49:35.168] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:49:35.168] Read Success [2025-09-24 07:49:35.168] Verifying certificate... [2025-09-24 07:49:35.424] Verified OK [2025-09-24 07:49:35.456] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:49:37.116] Verified OK [2025-09-24 07:49:37.116] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:49:37.691] Verified OK [2025-09-24 07:49:37.691] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:49:40.361] fs.protected_hardlinks = 1 [2025-09-24 07:49:40.361] fs.protected_symlinks = 1 [2025-09-24 07:49:40.377] kernel.modules_disabled = 1 [2025-09-24 07:49:40.569] [2025-09-24 07:49:40.569] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:49:41.897] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:49:49.559] SBL1:1210.0.1.0 [2025-09-24 07:49:49.591] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:49:51.174] SBL2:1210.0.1.0 [2025-09-24 07:49:51.205] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:49:51.317] j-A [2025-09-24 07:49:58.689] The R5 Autosar Classic is running [2025-09-24 07:49:58.689] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:49:58.689] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:49:59.298] INIT: version 2.96 booting [2025-09-24 07:49:59.393] INIT: Entering runlevel: 5 [2025-09-24 07:49:59.553] mtd32 attached [2025-09-24 07:49:59.569] mtd24 attached [2025-09-24 07:49:59.569] mtd28 attached [2025-09-24 07:49:59.617] RTNETLINK answers: File exists [2025-09-24 07:49:59.664] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:49:59.664] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:49:59.664] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:49:59.664] ubi0:dml_code is mounted. [2025-09-24 07:49:59.664] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:49:59.664] ubi1:textures is mounted. [2025-09-24 07:49:59.664] ubi2:animations is mounted. [2025-09-24 07:49:59.664] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:49:59.685] data.LB_FadeInType0=100 [2025-09-24 07:49:59.685] data.CHLH_FadeInType0=0 [2025-09-24 07:49:59.685] data.WU_FadeInDelay=0 [2025-09-24 07:49:59.685] max_time_out=0 [2025-09-24 07:49:59.685] No splash screen [2025-09-24 07:49:59.685] stop dss Done [2025-09-24 07:49:59.753] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:49:59.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:49:59.753] /dev/mem opened. [2025-09-24 07:49:59.753] Memory mapped at address 0xffffa85c8000. [2025-09-24 07:49:59.753] Read at address 0x00600018 (0xffffa85c8018): 0x00000000 [2025-09-24 07:49:59.753] Write at address 0x00600018 (0xffffa85c8018): 0x00400040, readback 0x00400040 [2025-09-24 07:49:59.896] Loaded PowerVR consumer services. [2025-09-24 07:50:00.025] Waiting data available... [2025-09-24 07:50:00.041] 512+0 records in [2025-09-24 07:50:00.041] 512+0 records out [2025-09-24 07:50:00.089] Starting syslogd/klogd: done [2025-09-24 07:50:00.089] DML Start [2025-09-24 07:50:00.281] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:50:00.504] DML res1: 0 [2025-09-24 07:50:00.919] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:50:00.946] Read Success [2025-09-24 07:50:00.946] Verifying certificate... [2025-09-24 07:50:01.186] Verified OK [2025-09-24 07:50:01.202] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:50:03.175] Verified OK [2025-09-24 07:50:03.175] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:50:03.559] Verified OK [2025-09-24 07:50:03.559] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:50:05.827] fs.protected_hardlinks = 1 [2025-09-24 07:50:05.827] fs.protected_symlinks = 1 [2025-09-24 07:50:05.827] kernel.modules_disabled = 1 [2025-09-24 07:50:06.002] [2025-09-24 07:50:06.002] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:50:07.596] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:50:15.276] SBL1:1210.0.1.0 [2025-09-24 07:50:15.308] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:50:16.891] SBL2:1210.0.1.0 [2025-09-24 07:50:16.922] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:50:17.034] j-A [2025-09-24 07:50:24.388] The R5 Autosar Classic is running [2025-09-24 07:50:24.388] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:50:24.409] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:50:25.016] INIT: version 2.96 booting [2025-09-24 07:50:25.128] INIT: Entering runlevel: 5 [2025-09-24 07:50:25.271] mtd24 attached [2025-09-24 07:50:25.287] mtd28 attached [2025-09-24 07:50:25.303] mtd32 attached [2025-09-24 07:50:25.351] RTNETLINK answers: File exists [2025-09-24 07:50:25.411] ubi0:textures is mounted. [2025-09-24 07:50:25.411] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:50:25.411] ubi1:animations is mounted. [2025-09-24 07:50:25.411] ubi2:dml_code is mounted. [2025-09-24 07:50:25.411] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:50:25.411] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:50:25.411] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:50:25.411] data.LB_FadeInType0=100 [2025-09-24 07:50:25.411] data.CHLH_FadeInType0=0 [2025-09-24 07:50:25.411] data.WU_FadeInDelay=0 [2025-09-24 07:50:25.411] max_time_out=0 [2025-09-24 07:50:25.411] No splash screen [2025-09-24 07:50:25.411] stop dss Done [2025-09-24 07:50:25.411] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:50:25.484] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:50:25.484] /dev/mem opened. [2025-09-24 07:50:25.484] Memory mapped at address 0xffff8f07d000. [2025-09-24 07:50:25.484] Read at address 0x00600018 (0xffff8f07d018): 0x00000000 [2025-09-24 07:50:25.484] Write at address 0x00600018 (0xffff8f07d018): 0x00400040, readback 0x00400040 [2025-09-24 07:50:25.484] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:50:25.595] Loaded PowerVR consumer services. [2025-09-24 07:50:25.740] Waiting data available... [2025-09-24 07:50:25.755] 512+0 records in [2025-09-24 07:50:25.755] 512+0 records out [2025-09-24 07:50:25.803] Starting syslogd/klogd: done [2025-09-24 07:50:25.819] DML Start [2025-09-24 07:50:25.979] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:50:26.203] DML res1: 0 [2025-09-24 07:50:26.619] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:50:26.635] Read Success [2025-09-24 07:50:26.635] Verifying certificate... [2025-09-24 07:50:26.874] Verified OK [2025-09-24 07:50:26.890] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:50:28.415] Verified OK [2025-09-24 07:50:28.415] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:50:28.956] Verified OK [2025-09-24 07:50:28.956] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:50:31.818] fs.protected_hardlinks = 1 [2025-09-24 07:50:31.818] fs.protected_symlinks = 1 [2025-09-24 07:50:31.833] kernel.modules_disabled = 1 [2025-09-24 07:50:32.026] [2025-09-24 07:50:32.026] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:50:33.255] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:50:41.000] SBL1:1210.0.1.0 [2025-09-24 07:50:41.033] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:50:42.616] SBL2:1210.0.1.0 [2025-09-24 07:50:42.647] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:50:42.759] j-A [2025-09-24 07:50:50.131] The R5 Autosar Classic is running [2025-09-24 07:50:50.131] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:50:50.131] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:50:50.738] INIT: version 2.96 booting [2025-09-24 07:50:50.851] INIT: Entering runlevel: 5 [2025-09-24 07:50:51.010] mtd32 attached [2025-09-24 07:50:51.010] mtd28 attached [2025-09-24 07:50:51.027] mtd24 attached [2025-09-24 07:50:51.075] RTNETLINK answers: File exists [2025-09-24 07:50:51.140] ubi1:animations is mounted. [2025-09-24 07:50:51.140] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:50:51.140] ubi2:textures is mounted. [2025-09-24 07:50:51.140] ubi0:dml_code is mounted. [2025-09-24 07:50:51.140] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:50:51.140] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:50:51.140] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:50:51.140] data.LB_FadeInType0=100 [2025-09-24 07:50:51.140] data.CHLH_FadeInType0=0 [2025-09-24 07:50:51.140] data.WU_FadeInDelay=0 [2025-09-24 07:50:51.140] max_time_out=0 [2025-09-24 07:50:51.140] No splash screen [2025-09-24 07:50:51.140] stop dss Done [2025-09-24 07:50:51.140] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:50:51.188] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:50:51.223] /dev/mem opened. [2025-09-24 07:50:51.223] Memory mapped at address 0xffff84b8d000. [2025-09-24 07:50:51.223] Read at address 0x00600018 (0xffff84b8d018): 0x00000000 [2025-09-24 07:50:51.223] Write at address 0x00600018 (0xffff84b8d018): 0x00400040, readback 0x00400040 [2025-09-24 07:50:51.223] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:50:51.319] Loaded PowerVR consumer services. [2025-09-24 07:50:51.490] Waiting data available... [2025-09-24 07:50:51.490] 512+0 records in [2025-09-24 07:50:51.490] 512+0 records out [2025-09-24 07:50:51.522] Starting syslogd/klogd: done [2025-09-24 07:50:51.538] DML Start [2025-09-24 07:50:51.714] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:50:51.921] DML res1: 0 [2025-09-24 07:50:52.438] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:50:52.438] Read Success [2025-09-24 07:50:52.438] Verifying certificate... [2025-09-24 07:50:52.678] Verified OK [2025-09-24 07:50:52.710] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:50:54.384] Verified OK [2025-09-24 07:50:54.384] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:50:54.893] Verified OK [2025-09-24 07:50:54.893] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:50:57.418] fs.protected_hardlinks = 1 [2025-09-24 07:50:57.434] fs.protected_symlinks = 1 [2025-09-24 07:50:57.434] kernel.modules_disabled = 1 [2025-09-24 07:50:57.610] [2025-09-24 07:50:57.610] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:50:58.957] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:51:06.721] SBL1:1210.0.1.0 [2025-09-24 07:51:06.769] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:51:08.336] SBL2:1210.0.1.0 [2025-09-24 07:51:08.384] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:51:08.480] j-A [2025-09-24 07:51:15.833] The R5 Autosar Classic is running [2025-09-24 07:51:15.859] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:51:15.859] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:51:16.467] INIT: version 2.96 booting [2025-09-24 07:51:16.578] INIT: Entering runlevel: 5 [2025-09-24 07:51:16.738] mtd32 attached [2025-09-24 07:51:16.738] mtd28 attached [2025-09-24 07:51:16.754] mtd24 attached [2025-09-24 07:51:16.770] ubi0:dml_code is mounted. [2025-09-24 07:51:16.803] RTNETLINK answers: File exists [2025-09-24 07:51:16.834] ubi1:animations is mounted. [2025-09-24 07:51:16.834] ubi2:textures is mounted. [2025-09-24 07:51:16.834] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:51:16.834] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:51:16.834] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:51:16.866] data.LB_FadeInType0=100 [2025-09-24 07:51:16.866] data.CHLH_FadeInType0=0 [2025-09-24 07:51:16.866] data.WU_FadeInDelay=0 [2025-09-24 07:51:16.866] max_time_out=0 [2025-09-24 07:51:16.866] No splash screen [2025-09-24 07:51:16.866] stop dss Done [2025-09-24 07:51:16.866] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:51:16.866] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:51:16.942] /dev/mem opened. [2025-09-24 07:51:16.942] Memory mapped at address 0xffffb01e1000. [2025-09-24 07:51:16.942] Read at address 0x00600018 (0xffffb01e1018): 0x00000000 [2025-09-24 07:51:16.942] Write at address 0x00600018 (0xffffb01e1018): 0x00400040, readback 0x00400040 [2025-09-24 07:51:16.942] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:51:16.942] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:51:17.150] Loaded PowerVR consumer services. [2025-09-24 07:51:17.198] Waiting data available... [2025-09-24 07:51:17.214] 512+0 records in [2025-09-24 07:51:17.214] 512+0 records out [2025-09-24 07:51:17.262] Starting syslogd/klogd: done [2025-09-24 07:51:17.278] DML Start [2025-09-24 07:51:17.470] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:51:17.693] DML res1: 0 [2025-09-24 07:51:18.109] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:51:18.125] Read Success [2025-09-24 07:51:18.125] Verifying certificate... [2025-09-24 07:51:18.365] Verified OK [2025-09-24 07:51:18.397] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:51:20.144] Verified OK [2025-09-24 07:51:20.144] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:51:20.751] Verified OK [2025-09-24 07:51:20.767] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:51:23.341] fs.protected_hardlinks = 1 [2025-09-24 07:51:23.357] fs.protected_symlinks = 1 [2025-09-24 07:51:23.357] kernel.modules_disabled = 1 [2025-09-24 07:51:23.565] [2025-09-24 07:51:23.565] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:51:24.759] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:51:32.438] SBL1:1210.0.1.0 [2025-09-24 07:51:32.470] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:51:34.052] SBL2:1210.0.1.0 [2025-09-24 07:51:34.085] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 07:51:34.197] j-A [2025-09-24 07:51:41.571] The R5 Autosar Classic is running [2025-09-24 07:51:41.571] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:51:41.571] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:51:42.178] INIT: version 2.96 booting [2025-09-24 07:51:42.290] INIT: Entering runlevel: 5 [2025-09-24 07:51:42.434] mtd32 attached [2025-09-24 07:51:42.450] mtd24 attached [2025-09-24 07:51:42.466] mtd28 attached [2025-09-24 07:51:42.514] RTNETLINK answers: File exists [2025-09-24 07:51:42.514] ubi0:dml_code is mounted. [2025-09-24 07:51:42.571] ubi1:textures is mounted. [2025-09-24 07:51:42.571] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:51:42.571] ubi2:animations is mounted. [2025-09-24 07:51:42.571] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:51:42.571] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:51:42.571] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:51:42.571] data.LB_FadeInType0=100 [2025-09-24 07:51:42.571] data.CHLH_FadeInType0=0 [2025-09-24 07:51:42.571] data.WU_FadeInDelay=0 [2025-09-24 07:51:42.571] max_time_out=0 [2025-09-24 07:51:42.571] No splash screen [2025-09-24 07:51:42.571] stop dss Done [2025-09-24 07:51:42.571] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:51:42.603] /dev/mem opened. [2025-09-24 07:51:42.603] Memory mapped at address 0xffffaa72f000. [2025-09-24 07:51:42.654] Read at address 0x00600018 (0xffffaa72f018): 0x00000000 [2025-09-24 07:51:42.654] Write at address 0x00600018 (0xffffaa72f018): 0x00400040, readback 0x00400040 [2025-09-24 07:51:42.654] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:51:42.654] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:51:42.830] Loaded PowerVR consumer services. [2025-09-24 07:51:42.925] Waiting data available... [2025-09-24 07:51:42.958] 512+0 records in [2025-09-24 07:51:42.958] 512+0 records out [2025-09-24 07:51:42.990] Starting syslogd/klogd: done [2025-09-24 07:51:43.006] DML Start [2025-09-24 07:51:43.166] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:51:43.341] DML res1: 0 [2025-09-24 07:51:43.846] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:51:43.846] Read Success [2025-09-24 07:51:43.846] Verifying certificate... [2025-09-24 07:51:44.070] Verified OK [2025-09-24 07:51:44.086] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:51:45.781] Verified OK [2025-09-24 07:51:45.781] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:51:46.420] Verified OK [2025-09-24 07:51:46.420] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:51:48.989] fs.protected_hardlinks = 1 [2025-09-24 07:51:48.989] fs.protected_symlinks = 1 [2025-09-24 07:51:48.989] kernel.modules_disabled = 1 [2025-09-24 07:51:49.180] [2025-09-24 07:51:49.180] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:51:50.439] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:51:58.163] SBL1:1210.0.1.0 [2025-09-24 07:51:58.195] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:51:59.777] SBL2:1210.0.1.0 [2025-09-24 07:51:59.809] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:51:59.921] j-A [2025-09-24 07:52:07.296] The R5 Autosar Classic is running [2025-09-24 07:52:07.296] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:52:07.296] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:52:07.904] INIT: version 2.96 booting [2025-09-24 07:52:08.015] INIT: Entering runlevel: 5 [2025-09-24 07:52:08.159] mtd28 attached [2025-09-24 07:52:08.175] mtd24 attached [2025-09-24 07:52:08.191] mtd32 attached [2025-09-24 07:52:08.223] ubi0:animations is mounted. [2025-09-24 07:52:08.239] RTNETLINK answers: File exists [2025-09-24 07:52:08.239] ubi2:dml_code is mounted. [2025-09-24 07:52:08.295] ubi1:textures is mounted. [2025-09-24 07:52:08.295] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:52:08.295] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:52:08.295] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:52:08.295] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:52:08.295] data.LB_FadeInType0=100 [2025-09-24 07:52:08.295] data.CHLH_FadeInType0=0 [2025-09-24 07:52:08.295] data.WU_FadeInDelay=0 [2025-09-24 07:52:08.295] max_time_out=0 [2025-09-24 07:52:08.295] No splash screen [2025-09-24 07:52:08.295] stop dss Done [2025-09-24 07:52:08.295] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:52:08.371] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:52:08.371] /dev/mem opened. [2025-09-24 07:52:08.371] Memory mapped at address 0xffff9a555000. [2025-09-24 07:52:08.371] Read at address 0x00600018 (0xffff9a555018): 0x00000000 [2025-09-24 07:52:08.371] Write at address 0x00600018 (0xffff9a555018): 0x00400040, readback 0x00400040 [2025-09-24 07:52:08.371] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:52:08.531] Loaded PowerVR consumer services. [2025-09-24 07:52:08.628] Waiting data available... [2025-09-24 07:52:08.644] 512+0 records in [2025-09-24 07:52:08.644] 512+0 records out [2025-09-24 07:52:08.691] Starting syslogd/klogd: done [2025-09-24 07:52:08.707] DML Start [2025-09-24 07:52:08.868] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:52:09.075] DML res1: 0 [2025-09-24 07:52:09.601] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:52:09.601] Read Success [2025-09-24 07:52:09.601] Verifying certificate... [2025-09-24 07:52:09.824] Verified OK [2025-09-24 07:52:09.840] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:52:11.466] Verified OK [2025-09-24 07:52:11.466] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:52:12.025] Verified OK [2025-09-24 07:52:12.047] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:52:14.572] fs.protected_hardlinks = 1 [2025-09-24 07:52:14.572] fs.protected_symlinks = 1 [2025-09-24 07:52:14.588] kernel.modules_disabled = 1 [2025-09-24 07:52:14.796] [2025-09-24 07:52:14.796] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:52:16.123] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:52:23.871] SBL1:1210.0.1.0 [2025-09-24 07:52:23.903] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:52:25.485] SBL2:1210.0.1.0 [2025-09-24 07:52:25.517] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:52:25.630] j-A [2025-09-24 07:52:33.001] The R5 Autosar Classic is running [2025-09-24 07:52:33.001] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:52:33.001] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:52:33.608] INIT: version 2.96 booting [2025-09-24 07:52:33.720] INIT: Entering runlevel: 5 [2025-09-24 07:52:33.864] mtd32 attached [2025-09-24 07:52:33.880] mtd28 attached [2025-09-24 07:52:33.880] mtd24 attached [2025-09-24 07:52:33.944] RTNETLINK answers: File exists [2025-09-24 07:52:33.944] ubi0:dml_code is mounted. [2025-09-24 07:52:33.977] ubi1:animations is mounted. [2025-09-24 07:52:33.977] ubi2:textures is mounted. [2025-09-24 07:52:33.977] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:52:33.977] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:52:33.977] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:52:34.009] data.LB_FadeInType0=100 [2025-09-24 07:52:34.009] data.CHLH_FadeInType0=0 [2025-09-24 07:52:34.009] data.WU_FadeInDelay=0 [2025-09-24 07:52:34.009] max_time_out=0 [2025-09-24 07:52:34.009] No splash screen [2025-09-24 07:52:34.009] stop dss Done [2025-09-24 07:52:34.009] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:52:34.009] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:52:34.041] /dev/mem opened. [2025-09-24 07:52:34.041] Memory mapped at address 0xffffba423000. [2025-09-24 07:52:34.067] Read at address 0x00600018 (0xffffba423018): 0x00000000 [2025-09-24 07:52:34.067] Write at address 0x00600018 (0xffffba423018): 0x00400040, readback 0x00400040 [2025-09-24 07:52:34.111] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:52:34.111] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:52:34.303] Loaded PowerVR consumer services. [2025-09-24 07:52:34.335] Waiting data available... [2025-09-24 07:52:34.351] 512+0 records in [2025-09-24 07:52:34.351] 512+0 records out [2025-09-24 07:52:34.383] Starting syslogd/klogd: done [2025-09-24 07:52:34.399] DML Start [2025-09-24 07:52:34.559] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:52:34.783] DML res1: 0 [2025-09-24 07:52:35.214] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:52:35.235] Read Success [2025-09-24 07:52:35.235] Verifying certificate... [2025-09-24 07:52:35.491] Verified OK [2025-09-24 07:52:35.507] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:52:37.160] Verified OK [2025-09-24 07:52:37.160] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:52:37.783] Verified OK [2025-09-24 07:52:37.783] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:52:40.485] fs.protected_hardlinks = 1 [2025-09-24 07:52:40.501] fs.protected_symlinks = 1 [2025-09-24 07:52:40.501] kernel.modules_disabled = 1 [2025-09-24 07:52:40.709] [2025-09-24 07:52:40.709] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:52:41.833] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:52:49.591] SBL1:1210.0.1.0 [2025-09-24 07:52:49.623] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:52:51.206] SBL2:1210.0.1.0 [2025-09-24 07:52:51.238] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:52:51.349] j-A [2025-09-24 07:52:58.689] The R5 Autosar Classic is running [2025-09-24 07:52:58.720] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:52:58.720] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:52:59.327] INIT: version 2.96 booting [2025-09-24 07:52:59.439] INIT: Entering runlevel: 5 [2025-09-24 07:52:59.599] mtd24 attached [2025-09-24 07:52:59.599] mtd32 attached [2025-09-24 07:52:59.615] mtd28 attached [2025-09-24 07:52:59.663] RTNETLINK answers: File exists [2025-09-24 07:52:59.707] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:52:59.707] ubi1:dml_code is mounted. [2025-09-24 07:52:59.707] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:52:59.707] ubi0:textures is mounted. [2025-09-24 07:52:59.707] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:52:59.707] ubi2:animations is mounted. [2025-09-24 07:52:59.707] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:52:59.707] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:52:59.731] data.LB_FadeInType0=100 [2025-09-24 07:52:59.731] data.CHLH_FadeInType0=0 [2025-09-24 07:52:59.731] data.WU_FadeInDelay=0 [2025-09-24 07:52:59.731] max_time_out=0 [2025-09-24 07:52:59.731] No splash screen [2025-09-24 07:52:59.731] stop dss Done [2025-09-24 07:52:59.763] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:52:59.811] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:52:59.811] /dev/mem opened. [2025-09-24 07:52:59.811] Memory mapped at address 0xffffba4f1000. [2025-09-24 07:52:59.811] Read at address 0x00600018 (0xffffba4f1018): 0x00000000 [2025-09-24 07:52:59.811] Write at address 0x00600018 (0xffffba4f1018): 0x00400040, readback 0x00400040 [2025-09-24 07:52:59.891] Loaded PowerVR consumer services. [2025-09-24 07:53:00.078] Waiting data available... [2025-09-24 07:53:00.078] 512+0 records in [2025-09-24 07:53:00.078] 512+0 records out [2025-09-24 07:53:00.111] Starting syslogd/klogd: done [2025-09-24 07:53:00.127] DML Start [2025-09-24 07:53:00.335] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:53:00.606] DML res1: 0 [2025-09-24 07:53:00.983] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:53:00.983] Read Success [2025-09-24 07:53:00.983] Verifying certificate... [2025-09-24 07:53:01.207] Verified OK [2025-09-24 07:53:01.223] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:53:02.803] Verified OK [2025-09-24 07:53:02.803] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:53:03.384] Verified OK [2025-09-24 07:53:03.384] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:53:06.150] fs.protected_hardlinks = 1 [2025-09-24 07:53:06.180] fs.protected_symlinks = 1 [2025-09-24 07:53:06.180] kernel.modules_disabled = 1 [2025-09-24 07:53:06.372] [2025-09-24 07:53:06.372] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:53:07.642] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:53:15.288] SBL1:1210.0.1.0 [2025-09-24 07:53:15.320] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:53:16.902] SBL2:1210.0.1.0 [2025-09-24 07:53:16.934] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:53:17.047] j-A [2025-09-24 07:53:24.422] The R5 Autosar Classic is running [2025-09-24 07:53:24.422] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:53:24.422] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:53:25.030] INIT: version 2.96 booting [2025-09-24 07:53:25.142] INIT: Entering runlevel: 5 [2025-09-24 07:53:25.285] mtd24 attached [2025-09-24 07:53:25.301] mtd28 attached [2025-09-24 07:53:25.317] mtd32 attached [2025-09-24 07:53:25.365] ubi0:textures is mounted. [2025-09-24 07:53:25.365] RTNETLINK answers: File exists [2025-09-24 07:53:25.427] ubi1:animations is mounted. [2025-09-24 07:53:25.427] ubi2:dml_code is mounted. [2025-09-24 07:53:25.427] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:53:25.427] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:53:25.427] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:53:25.427] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:53:25.427] data.LB_FadeInType0=100 [2025-09-24 07:53:25.427] data.CHLH_FadeInType0=0 [2025-09-24 07:53:25.427] data.WU_FadeInDelay=0 [2025-09-24 07:53:25.427] max_time_out=0 [2025-09-24 07:53:25.427] No splash screen [2025-09-24 07:53:25.427] stop dss Done [2025-09-24 07:53:25.427] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:53:25.506] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:53:25.506] /dev/mem opened. [2025-09-24 07:53:25.506] Memory mapped at address 0xffffb2fee000. [2025-09-24 07:53:25.506] Read at address 0x00600018 (0xffffb2fee018): 0x00000000 [2025-09-24 07:53:25.506] Write at address 0x00600018 (0xffffb2fee018): 0x00400040, readback 0x00400040 [2025-09-24 07:53:25.506] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:53:25.618] Loaded PowerVR consumer services. [2025-09-24 07:53:25.776] Waiting data available... [2025-09-24 07:53:25.776] 512+0 records in [2025-09-24 07:53:25.776] 512+0 records out [2025-09-24 07:53:25.807] Starting syslogd/klogd: done [2025-09-24 07:53:25.839] DML Start [2025-09-24 07:53:26.000] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:53:26.208] DML res1: 0 [2025-09-24 07:53:26.716] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:53:26.716] Read Success [2025-09-24 07:53:26.716] Verifying certificate... [2025-09-24 07:53:26.971] Verified OK [2025-09-24 07:53:26.987] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:53:28.666] Verified OK [2025-09-24 07:53:28.666] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:53:29.321] Verified OK [2025-09-24 07:53:29.342] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:53:31.933] fs.protected_hardlinks = 1 [2025-09-24 07:53:31.949] fs.protected_symlinks = 1 [2025-09-24 07:53:31.949] kernel.modules_disabled = 1 [2025-09-24 07:53:32.156] [2025-09-24 07:53:32.156] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:53:33.282] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:53:40.992] SBL1:1210.0.1.0 [2025-09-24 07:53:41.024] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:53:42.607] SBL2:1210.0.1.0 [2025-09-24 07:53:42.639] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:53:42.751] j-A [2025-09-24 07:53:50.106] The R5 Autosar Classic is running [2025-09-24 07:53:50.106] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:53:50.127] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:53:50.734] INIT: version 2.96 booting [2025-09-24 07:53:50.846] INIT: Entering runlevel: 5 [2025-09-24 07:53:50.990] mtd24 attached [2025-09-24 07:53:51.006] mtd28 attached [2025-09-24 07:53:51.022] mtd32 attached [2025-09-24 07:53:51.070] ubi0:textures is mounted. [2025-09-24 07:53:51.070] RTNETLINK answers: File exists [2025-09-24 07:53:51.125] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:53:51.125] ubi2:dml_code is mounted. [2025-09-24 07:53:51.125] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:53:51.125] ubi1:animations is mounted. [2025-09-24 07:53:51.125] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:53:51.125] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:53:51.125] data.LB_FadeInType0=100 [2025-09-24 07:53:51.125] data.CHLH_FadeInType0=0 [2025-09-24 07:53:51.125] data.WU_FadeInDelay=0 [2025-09-24 07:53:51.125] max_time_out=0 [2025-09-24 07:53:51.125] No splash screen [2025-09-24 07:53:51.125] stop dss Done [2025-09-24 07:53:51.125] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:53:51.172] /dev/mem opened. [2025-09-24 07:53:51.172] Memory mapped at address 0xffff988be000. [2025-09-24 07:53:51.198] Read at address 0x00600018 (0xffff988be018): 0x00000000 [2025-09-24 07:53:51.198] Write at address 0x00600018 (0xffff988be018): 0x00400040, readback 0x00400040 [2025-09-24 07:53:51.198] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:53:51.214] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:53:51.343] Loaded PowerVR consumer services. [2025-09-24 07:53:51.470] Waiting data available... [2025-09-24 07:53:51.486] 512+0 records in [2025-09-24 07:53:51.486] 512+0 records out [2025-09-24 07:53:51.519] Starting syslogd/klogd: done [2025-09-24 07:53:51.535] DML Start [2025-09-24 07:53:51.727] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:53:51.950] DML res1: 0 [2025-09-24 07:53:52.421] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:53:52.421] Read Success [2025-09-24 07:53:52.421] Verifying certificate... [2025-09-24 07:53:52.661] Verified OK [2025-09-24 07:53:52.677] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:53:54.366] Verified OK [2025-09-24 07:53:54.366] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:53:54.918] Verified OK [2025-09-24 07:53:54.918] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:53:57.396] fs.protected_hardlinks = 1 [2025-09-24 07:53:57.396] fs.protected_symlinks = 1 [2025-09-24 07:53:57.411] kernel.modules_disabled = 1 [2025-09-24 07:53:57.619] [2025-09-24 07:53:57.619] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:53:59.010] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:54:06.690] SBL1:1210.0.1.0 [2025-09-24 07:54:06.738] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:54:08.304] SBL2:1210.0.1.0 [2025-09-24 07:54:08.352] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:54:08.447] j-A [2025-09-24 07:54:15.802] The R5 Autosar Classic is running [2025-09-24 07:54:15.827] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:54:15.827] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:54:16.435] INIT: version 2.96 booting [2025-09-24 07:54:16.546] INIT: Entering runlevel: 5 [2025-09-24 07:54:16.707] mtd24 attached [2025-09-24 07:54:16.722] mtd28 attached [2025-09-24 07:54:16.722] mtd32 attached [2025-09-24 07:54:16.787] RTNETLINK answers: File exists [2025-09-24 07:54:16.787] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:54:16.827] ubi1:animations is mounted. [2025-09-24 07:54:16.827] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:54:16.827] ubi0:textures is mounted. [2025-09-24 07:54:16.827] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:54:16.827] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:54:16.827] ubi2:dml_code is mounted. [2025-09-24 07:54:16.827] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:54:16.851] data.LB_FadeInType0=100 [2025-09-24 07:54:16.851] data.CHLH_FadeInType0=0 [2025-09-24 07:54:16.851] data.WU_FadeInDelay=0 [2025-09-24 07:54:16.851] max_time_out=0 [2025-09-24 07:54:16.851] No splash screen [2025-09-24 07:54:16.851] stop dss Done [2025-09-24 07:54:16.867] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:54:16.883] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:54:16.939] /dev/mem opened. [2025-09-24 07:54:16.939] Memory mapped at address 0xffffb0b99000. [2025-09-24 07:54:16.939] Read at address 0x00600018 (0xffffb0b99018): 0x00000000 [2025-09-24 07:54:16.939] Write at address 0x00600018 (0xffffb0b99018): 0x00400040, readback 0x00400040 [2025-09-24 07:54:17.019] Loaded PowerVR consumer services. [2025-09-24 07:54:17.179] Waiting data available... [2025-09-24 07:54:17.195] 512+0 records in [2025-09-24 07:54:17.195] 512+0 records out [2025-09-24 07:54:17.211] Starting syslogd/klogd: done [2025-09-24 07:54:17.244] DML Start [2025-09-24 07:54:17.403] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:54:17.611] DML res1: 0 [2025-09-24 07:54:18.103] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:54:18.103] Read Success [2025-09-24 07:54:18.103] Verifying certificate... [2025-09-24 07:54:18.326] Verified OK [2025-09-24 07:54:18.342] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:54:20.038] Verified OK [2025-09-24 07:54:20.054] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:54:20.639] Verified OK [2025-09-24 07:54:20.639] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:54:23.309] fs.protected_hardlinks = 1 [2025-09-24 07:54:23.325] fs.protected_symlinks = 1 [2025-09-24 07:54:23.325] kernel.modules_disabled = 1 [2025-09-24 07:54:23.533] [2025-09-24 07:54:23.533] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:54:24.700] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:54:32.414] SBL1:1210.0.1.0 [2025-09-24 07:54:32.446] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:54:34.028] SBL2:1210.0.1.0 [2025-09-24 07:54:34.060] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:54:34.172] j-A [2025-09-24 07:54:41.526] The R5 Autosar Classic is running [2025-09-24 07:54:41.526] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:54:41.547] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:54:42.154] INIT: version 2.96 booting [2025-09-24 07:54:42.267] INIT: Entering runlevel: 5 [2025-09-24 07:54:42.427] mtd28 attached [2025-09-24 07:54:42.427] mtd24 attached [2025-09-24 07:54:42.443] mtd32 attached [2025-09-24 07:54:42.491] RTNETLINK answers: File exists [2025-09-24 07:54:42.491] ubi0:animations is mounted. [2025-09-24 07:54:42.534] ubi1:textures is mounted. [2025-09-24 07:54:42.534] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:54:42.534] ubi2:dml_code is mounted. [2025-09-24 07:54:42.534] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:54:42.534] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:54:42.534] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:54:42.534] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:54:42.557] data.LB_FadeInType0=100 [2025-09-24 07:54:42.557] data.CHLH_FadeInType0=0 [2025-09-24 07:54:42.557] data.WU_FadeInDelay=0 [2025-09-24 07:54:42.557] max_time_out=0 [2025-09-24 07:54:42.557] No splash screen [2025-09-24 07:54:42.557] stop dss Done [2025-09-24 07:54:42.573] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:54:42.573] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:54:42.605] /dev/mem opened. [2025-09-24 07:54:42.605] Memory mapped at address 0xffffae2f6000. [2025-09-24 07:54:42.631] Read at address 0x00600018 (0xffffae2f6018): 0x00000000 [2025-09-24 07:54:42.631] Write at address 0x00600018 (0xffffae2f6018): 0x00400040, readback 0x00400040 [2025-09-24 07:54:42.743] Loaded PowerVR consumer services. [2025-09-24 07:54:42.901] Waiting data available... [2025-09-24 07:54:42.901] 512+0 records in [2025-09-24 07:54:42.901] 512+0 records out [2025-09-24 07:54:42.917] Starting syslogd/klogd: done [2025-09-24 07:54:42.933] DML Start [2025-09-24 07:54:43.077] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:54:43.316] DML res1: 0 [2025-09-24 07:54:43.761] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:54:43.761] Read Success [2025-09-24 07:54:43.761] Verifying certificate... [2025-09-24 07:54:44.049] Verified OK [2025-09-24 07:54:44.065] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:54:45.782] Verified OK [2025-09-24 07:54:45.782] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:54:46.433] Verified OK [2025-09-24 07:54:46.433] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:54:49.005] fs.protected_hardlinks = 1 [2025-09-24 07:54:49.005] fs.protected_symlinks = 1 [2025-09-24 07:54:49.005] kernel.modules_disabled = 1 [2025-09-24 07:54:49.197] [2025-09-24 07:54:49.197] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:54:50.439] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:54:58.127] SBL1:1210.0.1.0 [2025-09-24 07:54:58.174] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:54:59.741] SBL2:1210.0.1.0 [2025-09-24 07:54:59.789] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:54:59.885] j-A [2025-09-24 07:55:07.238] The R5 Autosar Classic is running [2025-09-24 07:55:07.262] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:55:07.262] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:55:07.869] INIT: version 2.96 booting [2025-09-24 07:55:07.981] INIT: Entering runlevel: 5 [2025-09-24 07:55:08.141] mtd32 attached [2025-09-24 07:55:08.141] mtd24 attached [2025-09-24 07:55:08.157] mtd28 attached [2025-09-24 07:55:08.237] RTNETLINK answers: File exists [2025-09-24 07:55:08.237] ubi0:dml_code is mounted. [2025-09-24 07:55:08.237] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:55:08.237] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:55:08.237] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:55:08.237] ubi1:textures is mounted. [2025-09-24 07:55:08.237] ubi2:animations is mounted. [2025-09-24 07:55:08.237] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:55:08.237] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:55:08.261] data.LB_FadeInType0=100 [2025-09-24 07:55:08.261] data.CHLH_FadeInType0=0 [2025-09-24 07:55:08.261] data.WU_FadeInDelay=0 [2025-09-24 07:55:08.261] max_time_out=0 [2025-09-24 07:55:08.261] No splash screen [2025-09-24 07:55:08.261] stop dss Done [2025-09-24 07:55:08.291] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:55:08.291] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:55:08.342] /dev/mem opened. [2025-09-24 07:55:08.342] Memory mapped at address 0xffffbf5a5000. [2025-09-24 07:55:08.342] Read at address 0x00600018 (0xffffbf5a5018): 0x00000000 [2025-09-24 07:55:08.342] Write at address 0x00600018 (0xffffbf5a5018): 0x00400040, readback 0x00400040 [2025-09-24 07:55:08.454] Loaded PowerVR consumer services. [2025-09-24 07:55:08.613] Waiting data available... [2025-09-24 07:55:08.613] 512+0 records in [2025-09-24 07:55:08.613] 512+0 records out [2025-09-24 07:55:08.645] Starting syslogd/klogd: done [2025-09-24 07:55:08.661] DML Start [2025-09-24 07:55:08.820] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:55:09.028] DML res1: 0 [2025-09-24 07:55:09.516] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:55:09.516] Read Success [2025-09-24 07:55:09.516] Verifying certificate... [2025-09-24 07:55:09.756] Verified OK [2025-09-24 07:55:09.772] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:55:11.408] Verified OK [2025-09-24 07:55:11.408] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:55:12.038] Verified OK [2025-09-24 07:55:12.038] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:55:14.757] fs.protected_hardlinks = 1 [2025-09-24 07:55:14.757] fs.protected_symlinks = 1 [2025-09-24 07:55:14.772] kernel.modules_disabled = 1 [2025-09-24 07:55:14.964] [2025-09-24 07:55:14.964] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:55:16.112] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:55:23.864] SBL1:1210.0.1.0 [2025-09-24 07:55:23.912] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:55:25.479] SBL2:1210.0.1.0 [2025-09-24 07:55:25.527] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:55:25.639] j-A [2025-09-24 07:55:32.976] The R5 Autosar Classic is running [2025-09-24 07:55:33.007] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:55:33.007] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:55:33.615] INIT: version 2.96 booting [2025-09-24 07:55:33.726] INIT: Entering runlevel: 5 [2025-09-24 07:55:33.870] mtd28 attached [2025-09-24 07:55:33.886] mtd24 attached [2025-09-24 07:55:33.902] mtd32 attached [2025-09-24 07:55:33.950] ubi0:animations is mounted. [2025-09-24 07:55:33.950] RTNETLINK answers: File exists [2025-09-24 07:55:34.001] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:55:34.001] ubi1:textures is mounted. [2025-09-24 07:55:34.001] ubi2:dml_code is mounted. [2025-09-24 07:55:34.001] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:55:34.001] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:55:34.001] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:55:34.001] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:55:34.001] data.LB_FadeInType0=100 [2025-09-24 07:55:34.001] data.CHLH_FadeInType0=0 [2025-09-24 07:55:34.001] data.WU_FadeInDelay=0 [2025-09-24 07:55:34.001] max_time_out=0 [2025-09-24 07:55:34.001] No splash screen [2025-09-24 07:55:34.001] stop dss Done [2025-09-24 07:55:34.073] /dev/mem opened. [2025-09-24 07:55:34.073] Memory mapped at address 0xffff880f0000. [2025-09-24 07:55:34.073] Read at address 0x00600018 (0xffff880f0018): 0x00000000 [2025-09-24 07:55:34.073] Write at address 0x00600018 (0xffff880f0018): 0x00400040, readback 0x00400040 [2025-09-24 07:55:34.100] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:55:34.100] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:55:34.179] Loaded PowerVR consumer services. [2025-09-24 07:55:34.323] Waiting data available... [2025-09-24 07:55:34.339] 512+0 records in [2025-09-24 07:55:34.339] 512+0 records out [2025-09-24 07:55:34.387] Starting syslogd/klogd: done [2025-09-24 07:55:34.403] DML Start [2025-09-24 07:55:34.579] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:55:34.803] DML res1: 0 [2025-09-24 07:55:35.243] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:55:35.243] Read Success [2025-09-24 07:55:35.243] Verifying certificate... [2025-09-24 07:55:35.484] Verified OK [2025-09-24 07:55:35.499] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:55:37.146] Verified OK [2025-09-24 07:55:37.146] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:55:37.705] Verified OK [2025-09-24 07:55:37.705] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:55:40.408] fs.protected_hardlinks = 1 [2025-09-24 07:55:40.424] fs.protected_symlinks = 1 [2025-09-24 07:55:40.424] kernel.modules_disabled = 1 [2025-09-24 07:55:40.632] [2025-09-24 07:55:40.632] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:55:41.859] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:55:49.579] SBL1:1210.0.1.0 [2025-09-24 07:55:49.611] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:55:51.194] SBL2:1210.0.1.0 [2025-09-24 07:55:51.226] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 07:55:51.337] j-A [2025-09-24 07:55:58.711] The R5 Autosar Classic is running [2025-09-24 07:55:58.711] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:55:58.711] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:55:59.318] INIT: version 2.96 booting [2025-09-24 07:55:59.429] INIT: Entering runlevel: 5 [2025-09-24 07:55:59.573] mtd24 attached [2025-09-24 07:55:59.590] mtd28 attached [2025-09-24 07:55:59.605] mtd32 attached [2025-09-24 07:55:59.638] ubi0:textures is mounted. [2025-09-24 07:55:59.654] RTNETLINK answers: File exists [2025-09-24 07:55:59.654] ubi1:animations is mounted. [2025-09-24 07:55:59.713] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:55:59.713] ubi2:dml_code is mounted. [2025-09-24 07:55:59.713] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:55:59.713] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:55:59.713] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:55:59.713] data.LB_FadeInType0=100 [2025-09-24 07:55:59.713] data.CHLH_FadeInType0=0 [2025-09-24 07:55:59.713] data.WU_FadeInDelay=0 [2025-09-24 07:55:59.713] max_time_out=0 [2025-09-24 07:55:59.713] No splash screen [2025-09-24 07:55:59.713] stop dss Done [2025-09-24 07:55:59.713] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:55:59.745] /dev/mem opened. [2025-09-24 07:55:59.788] Memory mapped at address 0xffffa7db7000. [2025-09-24 07:55:59.788] Read at address 0x00600018 (0xffffa7db7018): 0x00000000 [2025-09-24 07:55:59.788] Write at address 0x00600018 (0xffffa7db7018): 0x00400040, readback 0x00400040 [2025-09-24 07:55:59.788] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:55:59.788] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:56:00.028] Loaded PowerVR consumer services. [2025-09-24 07:56:00.044] Waiting data available... [2025-09-24 07:56:00.076] 512+0 records in [2025-09-24 07:56:00.076] 512+0 records out [2025-09-24 07:56:00.124] Starting syslogd/klogd: done [2025-09-24 07:56:00.140] DML Start [2025-09-24 07:56:00.316] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:56:00.539] DML res1: 0 [2025-09-24 07:56:00.938] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:56:00.954] Read Success [2025-09-24 07:56:00.954] Verifying certificate... [2025-09-24 07:56:01.194] Verified OK [2025-09-24 07:56:01.210] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:56:02.879] Verified OK [2025-09-24 07:56:02.879] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:56:03.423] Verified OK [2025-09-24 07:56:03.423] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:56:05.965] fs.protected_hardlinks = 1 [2025-09-24 07:56:05.965] fs.protected_symlinks = 1 [2025-09-24 07:56:05.981] kernel.modules_disabled = 1 [2025-09-24 07:56:06.173] [2025-09-24 07:56:06.173] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:56:07.577] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:56:15.287] SBL1:1210.0.1.0 [2025-09-24 07:56:15.319] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:56:16.901] SBL2:1210.0.1.0 [2025-09-24 07:56:16.933] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:56:17.046] j-A [2025-09-24 07:56:24.417] The R5 Autosar Classic is running [2025-09-24 07:56:24.417] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:56:24.417] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:56:25.025] INIT: version 2.96 booting [2025-09-24 07:56:25.137] INIT: Entering runlevel: 5 [2025-09-24 07:56:25.297] mtd28 attached [2025-09-24 07:56:25.297] mtd32 attached [2025-09-24 07:56:25.313] mtd24 attached [2025-09-24 07:56:25.360] ubi0:animations is mounted. [2025-09-24 07:56:25.360] RTNETLINK answers: File exists [2025-09-24 07:56:25.421] ubi2:textures is mounted. [2025-09-24 07:56:25.421] ubi1:dml_code is mounted. [2025-09-24 07:56:25.421] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:56:25.421] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:56:25.421] data.LB_FadeInType0=100 [2025-09-24 07:56:25.421] data.CHLH_FadeInType0=0 [2025-09-24 07:56:25.421] data.WU_FadeInDelay=0 [2025-09-24 07:56:25.421] max_time_out=0 [2025-09-24 07:56:25.421] No splash screen [2025-09-24 07:56:25.421] stop dss Done [2025-09-24 07:56:25.421] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:56:25.421] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:56:25.421] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:56:25.453] /dev/mem opened. [2025-09-24 07:56:25.453] Memory mapped at address 0xffff86f13000. [2025-09-24 07:56:25.479] Read at address 0x00600018 (0xffff86f13018): 0x00000000 [2025-09-24 07:56:25.479] Write at address 0x00600018 (0xffff86f13018): 0x00400040, readback 0x00400040 [2025-09-24 07:56:25.519] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:56:25.519] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:56:25.614] Loaded PowerVR consumer services. [2025-09-24 07:56:25.758] Waiting data available... [2025-09-24 07:56:25.790] 512+0 records in [2025-09-24 07:56:25.790] 512+0 records out [2025-09-24 07:56:25.806] Starting syslogd/klogd: done [2025-09-24 07:56:25.822] DML Start [2025-09-24 07:56:25.982] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:56:26.206] DML res1: 0 [2025-09-24 07:56:26.661] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:56:26.661] Read Success [2025-09-24 07:56:26.661] Verifying certificate... [2025-09-24 07:56:26.901] Verified OK [2025-09-24 07:56:26.916] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:56:28.655] Verified OK [2025-09-24 07:56:28.655] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:56:29.278] Verified OK [2025-09-24 07:56:29.278] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:56:31.852] fs.protected_hardlinks = 1 [2025-09-24 07:56:31.852] fs.protected_symlinks = 1 [2025-09-24 07:56:31.868] kernel.modules_disabled = 1 [2025-09-24 07:56:32.060] [2025-09-24 07:56:32.060] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:56:33.273] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:56:41.006] SBL1:1210.0.1.0 [2025-09-24 07:56:41.038] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:56:42.620] SBL2:1210.0.1.0 [2025-09-24 07:56:42.652] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:56:42.765] j-A [2025-09-24 07:56:50.137] The R5 Autosar Classic is running [2025-09-24 07:56:50.137] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:56:50.137] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:56:50.744] INIT: version 2.96 booting [2025-09-24 07:56:50.856] INIT: Entering runlevel: 5 [2025-09-24 07:56:50.999] mtd24 attached [2025-09-24 07:56:51.015] mtd28 attached [2025-09-24 07:56:51.031] mtd32 attached [2025-09-24 07:56:51.064] ubi0:textures is mounted. [2025-09-24 07:56:51.080] ubi1:animations is mounted. [2025-09-24 07:56:51.080] RTNETLINK answers: File exists [2025-09-24 07:56:51.128] ubi2:dml_code is mounted. [2025-09-24 07:56:51.128] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:56:51.128] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:56:51.128] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:56:51.128] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:56:51.128] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:56:51.128] data.LB_FadeInType0=100 [2025-09-24 07:56:51.128] data.CHLH_FadeInType0=0 [2025-09-24 07:56:51.128] data.WU_FadeInDelay=0 [2025-09-24 07:56:51.128] max_time_out=0 [2025-09-24 07:56:51.128] No splash screen [2025-09-24 07:56:51.128] stop dss Done [2025-09-24 07:56:51.176] /dev/mem opened. [2025-09-24 07:56:51.176] Memory mapped at address 0xffff8b545000. [2025-09-24 07:56:51.208] Read at address 0x00600018 (0xffff8b545018): 0x00000000 [2025-09-24 07:56:51.208] Write at address 0x00600018 (0xffff8b545018): 0x00400040, readback 0x00400040 [2025-09-24 07:56:51.208] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:56:51.208] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:56:51.335] Loaded PowerVR consumer services. [2025-09-24 07:56:51.494] Waiting data available... [2025-09-24 07:56:51.494] 512+0 records in [2025-09-24 07:56:51.494] 512+0 records out [2025-09-24 07:56:51.526] Starting syslogd/klogd: done [2025-09-24 07:56:51.542] DML Start [2025-09-24 07:56:51.734] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:56:51.942] DML res1: 0 [2025-09-24 07:56:52.372] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:56:52.372] Read Success [2025-09-24 07:56:52.372] Verifying certificate... [2025-09-24 07:56:52.660] Verified OK [2025-09-24 07:56:52.675] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:56:54.379] Verified OK [2025-09-24 07:56:54.379] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:56:54.939] Verified OK [2025-09-24 07:56:54.939] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:56:57.528] fs.protected_hardlinks = 1 [2025-09-24 07:56:57.528] fs.protected_symlinks = 1 [2025-09-24 07:56:57.544] kernel.modules_disabled = 1 [2025-09-24 07:56:57.736] [2025-09-24 07:56:57.736] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:56:59.046] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:57:06.699] SBL1:1210.0.1.0 [2025-09-24 07:57:06.747] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:57:08.313] SBL2:1210.0.1.0 [2025-09-24 07:57:08.361] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:57:08.457] j-A [2025-09-24 07:57:15.811] The R5 Autosar Classic is running [2025-09-24 07:57:15.836] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:57:15.836] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:57:16.444] INIT: version 2.96 booting [2025-09-24 07:57:16.555] INIT: Entering runlevel: 5 [2025-09-24 07:57:16.716] mtd28 attached [2025-09-24 07:57:16.716] mtd24 attached [2025-09-24 07:57:16.732] mtd32 attached [2025-09-24 07:57:16.779] ubi0:animations is mounted. [2025-09-24 07:57:16.846] RTNETLINK answers: File exists [2025-09-24 07:57:16.846] ubi1:textures is mounted. [2025-09-24 07:57:16.846] ubi2:dml_code is mounted. [2025-09-24 07:57:16.846] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:57:16.846] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:57:16.846] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:57:16.846] data.LB_FadeInType0=100 [2025-09-24 07:57:16.846] data.CHLH_FadeInType0=0 [2025-09-24 07:57:16.846] data.WU_FadeInDelay=0 [2025-09-24 07:57:16.846] max_time_out=0 [2025-09-24 07:57:16.846] No splash screen [2025-09-24 07:57:16.846] stop dss Done [2025-09-24 07:57:16.846] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:57:16.846] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:57:16.916] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:57:16.916] /dev/mem opened. [2025-09-24 07:57:16.916] Memory mapped at address 0xffff8426a000. [2025-09-24 07:57:16.916] Read at address 0x00600018 (0xffff8426a018): 0x00000000 [2025-09-24 07:57:16.916] Write at address 0x00600018 (0xffff8426a018): 0x00400040, readback 0x00400040 [2025-09-24 07:57:16.916] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:57:17.140] Loaded PowerVR consumer services. [2025-09-24 07:57:17.172] Waiting data available... [2025-09-24 07:57:17.188] 512+0 records in [2025-09-24 07:57:17.204] 512+0 records out [2025-09-24 07:57:17.236] Starting syslogd/klogd: done [2025-09-24 07:57:17.268] DML Start [2025-09-24 07:57:17.443] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:57:17.651] DML res1: 0 [2025-09-24 07:57:18.107] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:57:18.107] Read Success [2025-09-24 07:57:18.107] Verifying certificate... [2025-09-24 07:57:18.347] Verified OK [2025-09-24 07:57:18.347] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:57:20.087] Verified OK [2025-09-24 07:57:20.087] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:57:20.675] Verified OK [2025-09-24 07:57:20.675] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:57:23.137] fs.protected_hardlinks = 1 [2025-09-24 07:57:23.153] fs.protected_symlinks = 1 [2025-09-24 07:57:23.153] kernel.modules_disabled = 1 [2025-09-24 07:57:23.360] [2025-09-24 07:57:23.360] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:57:24.703] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:57:32.417] SBL1:1210.0.1.0 [2025-09-24 07:57:32.449] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:57:34.031] SBL2:1210.0.1.0 [2025-09-24 07:57:34.063] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:57:34.176] j-A [2025-09-24 07:57:41.547] The R5 Autosar Classic is running [2025-09-24 07:57:41.547] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:57:41.547] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:57:42.154] INIT: version 2.96 booting [2025-09-24 07:57:42.267] INIT: Entering runlevel: 5 [2025-09-24 07:57:42.410] mtd24 attached [2025-09-24 07:57:42.427] mtd28 attached [2025-09-24 07:57:42.427] mtd32 attached [2025-09-24 07:57:42.459] ubi0:textures is mounted. [2025-09-24 07:57:42.475] ubi1:animations is mounted. [2025-09-24 07:57:42.542] RTNETLINK answers: File exists [2025-09-24 07:57:42.542] ubi2:dml_code is mounted. [2025-09-24 07:57:42.542] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:57:42.542] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:57:42.542] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:57:42.542] data.LB_FadeInType0=100 [2025-09-24 07:57:42.542] data.CHLH_FadeInType0=0 [2025-09-24 07:57:42.542] data.WU_FadeInDelay=0 [2025-09-24 07:57:42.542] max_time_out=0 [2025-09-24 07:57:42.542] No splash screen [2025-09-24 07:57:42.542] stop dss Done [2025-09-24 07:57:42.542] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:57:42.542] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:57:42.605] /dev/mem opened. [2025-09-24 07:57:42.605] Memory mapped at address 0xffffb2666000. [2025-09-24 07:57:42.605] Read at address 0x00600018 (0xffffb2666018): 0x00000000 [2025-09-24 07:57:42.605] Write at address 0x00600018 (0xffffb2666018): 0x00400040, readback 0x00400040 [2025-09-24 07:57:42.668] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:57:42.668] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:57:42.796] Loaded PowerVR consumer services. [2025-09-24 07:57:42.892] Waiting data available... [2025-09-24 07:57:42.908] 512+0 records in [2025-09-24 07:57:42.924] 512+0 records out [2025-09-24 07:57:42.940] Starting syslogd/klogd: done [2025-09-24 07:57:42.956] DML Start [2025-09-24 07:57:43.131] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:57:43.339] DML res1: 0 [2025-09-24 07:57:43.797] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:57:43.797] Read Success [2025-09-24 07:57:43.797] Verifying certificate... [2025-09-24 07:57:44.020] Verified OK [2025-09-24 07:57:44.036] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:57:45.564] Verified OK [2025-09-24 07:57:45.564] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:57:46.082] Verified OK [2025-09-24 07:57:46.082] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:57:48.959] fs.protected_hardlinks = 1 [2025-09-24 07:57:48.985] fs.protected_symlinks = 1 [2025-09-24 07:57:48.985] kernel.modules_disabled = 1 [2025-09-24 07:57:49.161] [2025-09-24 07:57:49.161] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:57:50.451] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:57:58.128] SBL1:1210.0.1.0 [2025-09-24 07:57:58.160] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:57:59.742] SBL2:1210.0.1.0 [2025-09-24 07:57:59.774] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:57:59.887] j-A [2025-09-24 07:58:07.262] The R5 Autosar Classic is running [2025-09-24 07:58:07.262] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:58:07.262] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:58:07.869] INIT: version 2.96 booting [2025-09-24 07:58:07.965] INIT: Entering runlevel: 5 [2025-09-24 07:58:08.141] mtd28 attached [2025-09-24 07:58:08.141] mtd24 attached [2025-09-24 07:58:08.157] mtd32 attached [2025-09-24 07:58:08.205] ubi1:textures is mounted. [2025-09-24 07:58:08.205] ubi0:animations is mounted. [2025-09-24 07:58:08.271] RTNETLINK answers: File exists [2025-09-24 07:58:08.271] ubi2:dml_code is mounted. [2025-09-24 07:58:08.271] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:58:08.271] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:58:08.271] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:58:08.271] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:58:08.271] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:58:08.271] data.LB_FadeInType0=100 [2025-09-24 07:58:08.271] data.CHLH_FadeInType0=0 [2025-09-24 07:58:08.271] data.WU_FadeInDelay=0 [2025-09-24 07:58:08.271] max_time_out=0 [2025-09-24 07:58:08.271] No splash screen [2025-09-24 07:58:08.271] stop dss Done [2025-09-24 07:58:08.319] /dev/mem opened. [2025-09-24 07:58:08.319] Memory mapped at address 0xffffa086d000. [2025-09-24 07:58:08.354] Read at address 0x00600018 (0xffffa086d018): 0x00000000 [2025-09-24 07:58:08.354] Write at address 0x00600018 (0xffffa086d018): 0x00400040, readback 0x00400040 [2025-09-24 07:58:08.354] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:58:08.354] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:58:08.578] Loaded PowerVR consumer services. [2025-09-24 07:58:08.642] Waiting data available... [2025-09-24 07:58:08.658] 512+0 records in [2025-09-24 07:58:08.658] 512+0 records out [2025-09-24 07:58:08.705] Starting syslogd/klogd: done [2025-09-24 07:58:08.721] DML Start [2025-09-24 07:58:08.866] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:58:09.105] DML res1: 0 [2025-09-24 07:58:09.503] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:58:09.503] Read Success [2025-09-24 07:58:09.503] Verifying certificate... [2025-09-24 07:58:09.806] Verified OK [2025-09-24 07:58:09.822] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:58:11.557] Verified OK [2025-09-24 07:58:11.557] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:58:12.116] Verified OK [2025-09-24 07:58:12.116] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:58:14.641] fs.protected_hardlinks = 1 [2025-09-24 07:58:14.657] fs.protected_symlinks = 1 [2025-09-24 07:58:14.673] kernel.modules_disabled = 1 [2025-09-24 07:58:14.881] [2025-09-24 07:58:14.881] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:58:16.154] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:58:23.825] SBL1:1210.0.1.0 [2025-09-24 07:58:23.873] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:58:25.440] SBL2:1210.0.1.0 [2025-09-24 07:58:25.487] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:58:25.583] j-A [2025-09-24 07:58:32.938] The R5 Autosar Classic is running [2025-09-24 07:58:32.959] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:58:32.959] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:58:33.566] INIT: version 2.96 booting [2025-09-24 07:58:33.679] INIT: Entering runlevel: 5 [2025-09-24 07:58:33.838] mtd24 attached [2025-09-24 07:58:33.838] mtd28 attached [2025-09-24 07:58:33.854] mtd32 attached [2025-09-24 07:58:33.902] ubi0:textures is mounted. [2025-09-24 07:58:33.902] RTNETLINK answers: File exists [2025-09-24 07:58:33.963] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:58:33.963] ubi2:dml_code is mounted. [2025-09-24 07:58:33.963] ubi1:animations is mounted. [2025-09-24 07:58:33.963] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:58:33.963] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:58:33.963] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:58:33.963] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:58:33.963] data.LB_FadeInType0=100 [2025-09-24 07:58:33.963] data.CHLH_FadeInType0=0 [2025-09-24 07:58:33.963] data.WU_FadeInDelay=0 [2025-09-24 07:58:33.963] max_time_out=0 [2025-09-24 07:58:33.963] No splash screen [2025-09-24 07:58:33.963] stop dss Done [2025-09-24 07:58:33.995] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:58:34.032] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:58:34.032] /dev/mem opened. [2025-09-24 07:58:34.032] Memory mapped at address 0xffff8d9ca000. [2025-09-24 07:58:34.032] Read at address 0x00600018 (0xffff8d9ca018): 0x00000000 [2025-09-24 07:58:34.032] Write at address 0x00600018 (0xffff8d9ca018): 0x00400040, readback 0x00400040 [2025-09-24 07:58:34.144] Loaded PowerVR consumer services. [2025-09-24 07:58:34.303] Waiting data available... [2025-09-24 07:58:34.320] 512+0 records in [2025-09-24 07:58:34.320] 512+0 records out [2025-09-24 07:58:34.368] Starting syslogd/klogd: done [2025-09-24 07:58:34.384] DML Start [2025-09-24 07:58:34.576] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:58:34.800] DML res1: 0 [2025-09-24 07:58:35.230] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:58:35.230] Read Success [2025-09-24 07:58:35.230] Verifying certificate... [2025-09-24 07:58:35.470] Verified OK [2025-09-24 07:58:35.486] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:58:37.101] Verified OK [2025-09-24 07:58:37.101] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:58:37.675] Verified OK [2025-09-24 07:58:37.675] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:58:40.345] fs.protected_hardlinks = 1 [2025-09-24 07:58:40.361] fs.protected_symlinks = 1 [2025-09-24 07:58:40.361] kernel.modules_disabled = 1 [2025-09-24 07:58:40.553] [2025-09-24 07:58:40.553] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:58:41.813] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:58:49.535] SBL1:1210.0.1.0 [2025-09-24 07:58:49.567] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:58:51.150] SBL2:1210.0.1.0 [2025-09-24 07:58:51.181] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:58:51.293] j-A [2025-09-24 07:58:58.648] The R5 Autosar Classic is running [2025-09-24 07:58:58.648] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:58:58.669] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:58:59.276] INIT: version 2.96 booting [2025-09-24 07:58:59.388] INIT: Entering runlevel: 5 [2025-09-24 07:58:59.548] mtd32 attached [2025-09-24 07:58:59.564] mtd28 attached [2025-09-24 07:58:59.564] mtd24 attached [2025-09-24 07:58:59.612] ubi0:dml_code is mounted. [2025-09-24 07:58:59.681] RTNETLINK answers: File exists [2025-09-24 07:58:59.681] ubi1:animations is mounted. [2025-09-24 07:58:59.681] ubi2:textures is mounted. [2025-09-24 07:58:59.681] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:58:59.681] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:58:59.681] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:58:59.681] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:58:59.681] data.LB_FadeInType0=100 [2025-09-24 07:58:59.681] data.CHLH_FadeInType0=0 [2025-09-24 07:58:59.681] data.WU_FadeInDelay=0 [2025-09-24 07:58:59.681] max_time_out=0 [2025-09-24 07:58:59.681] No splash screen [2025-09-24 07:58:59.681] stop dss Done [2025-09-24 07:58:59.681] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:58:59.748] /dev/mem opened. [2025-09-24 07:58:59.748] Memory mapped at address 0xffffba935000. [2025-09-24 07:58:59.748] Read at address 0x00600018 (0xffffba935018): 0x00000000 [2025-09-24 07:58:59.748] Write at address 0x00600018 (0xffffba935018): 0x00400040, readback 0x00400040 [2025-09-24 07:58:59.764] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:58:59.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:58:59.924] Loaded PowerVR consumer services. [2025-09-24 07:59:00.035] Waiting data available... [2025-09-24 07:59:00.051] 512+0 records in [2025-09-24 07:59:00.051] 512+0 records out [2025-09-24 07:59:00.115] Starting syslogd/klogd: done [2025-09-24 07:59:00.115] DML Start [2025-09-24 07:59:00.292] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:59:00.515] DML res1: 0 [2025-09-24 07:59:00.970] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:59:00.970] Read Success [2025-09-24 07:59:00.970] Verifying certificate... [2025-09-24 07:59:01.194] Verified OK [2025-09-24 07:59:01.210] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:59:02.820] Verified OK [2025-09-24 07:59:02.820] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:59:03.388] Verified OK [2025-09-24 07:59:03.388] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:59:06.122] fs.protected_hardlinks = 1 [2025-09-24 07:59:06.122] fs.protected_symlinks = 1 [2025-09-24 07:59:06.138] kernel.modules_disabled = 1 [2025-09-24 07:59:06.314] [2025-09-24 07:59:06.314] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:59:07.539] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:59:15.235] SBL1:1210.0.1.0 [2025-09-24 07:59:15.283] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:59:16.849] SBL2:1210.0.1.0 [2025-09-24 07:59:16.898] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:59:16.993] j-A [2025-09-24 07:59:24.348] The R5 Autosar Classic is running [2025-09-24 07:59:24.373] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:59:24.373] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:59:24.981] INIT: version 2.96 booting [2025-09-24 07:59:25.092] INIT: Entering runlevel: 5 [2025-09-24 07:59:25.253] mtd32 attached [2025-09-24 07:59:25.253] mtd24 attached [2025-09-24 07:59:25.268] mtd28 attached [2025-09-24 07:59:25.316] RTNETLINK answers: File exists [2025-09-24 07:59:25.386] ubi1:textures is mounted. [2025-09-24 07:59:25.386] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:59:25.386] ubi2:animations is mounted. [2025-09-24 07:59:25.386] ubi0:dml_code is mounted. [2025-09-24 07:59:25.386] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:59:25.386] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:59:25.386] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:59:25.386] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:59:25.386] data.LB_FadeInType0=100 [2025-09-24 07:59:25.386] data.CHLH_FadeInType0=0 [2025-09-24 07:59:25.386] data.WU_FadeInDelay=0 [2025-09-24 07:59:25.386] max_time_out=0 [2025-09-24 07:59:25.386] No splash screen [2025-09-24 07:59:25.386] stop dss Done [2025-09-24 07:59:25.418] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:59:25.434] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:59:25.469] /dev/mem opened. [2025-09-24 07:59:25.469] Memory mapped at address 0xffffa0ab8000. [2025-09-24 07:59:25.469] Read at address 0x00600018 (0xffffa0ab8018): 0x00000000 [2025-09-24 07:59:25.469] Write at address 0x00600018 (0xffffa0ab8018): 0x00400040, readback 0x00400040 [2025-09-24 07:59:25.661] Loaded PowerVR consumer services. [2025-09-24 07:59:25.725] Waiting data available... [2025-09-24 07:59:25.741] 512+0 records in [2025-09-24 07:59:25.741] 512+0 records out [2025-09-24 07:59:25.789] Starting syslogd/klogd: done [2025-09-24 07:59:25.805] DML Start [2025-09-24 07:59:25.981] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:59:26.189] DML res1: 0 [2025-09-24 07:59:26.602] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:59:26.602] Read Success [2025-09-24 07:59:26.602] Verifying certificate... [2025-09-24 07:59:26.810] Verified OK [2025-09-24 07:59:26.826] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:59:28.457] Verified OK [2025-09-24 07:59:28.457] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:59:29.095] Verified OK [2025-09-24 07:59:29.095] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:59:31.670] fs.protected_hardlinks = 1 [2025-09-24 07:59:31.670] fs.protected_symlinks = 1 [2025-09-24 07:59:31.686] kernel.modules_disabled = 1 [2025-09-24 07:59:31.877] [2025-09-24 07:59:31.877] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:59:33.229] RTNETLINK answers: Cannot assign requested address [2025-09-24 07:59:40.953] SBL1:1210.0.1.0 [2025-09-24 07:59:40.985] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:59:42.568] SBL2:1210.0.1.0 [2025-09-24 07:59:42.599] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 07:59:42.712] j-A [2025-09-24 07:59:50.086] The R5 Autosar Classic is running [2025-09-24 07:59:50.086] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 07:59:50.086] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 07:59:50.693] INIT: version 2.96 booting [2025-09-24 07:59:50.805] INIT: Entering runlevel: 5 [2025-09-24 07:59:50.964] mtd28 attached [2025-09-24 07:59:50.964] mtd32 attached [2025-09-24 07:59:50.980] mtd24 attached [2025-09-24 07:59:51.028] ubi0:animations is mounted. [2025-09-24 07:59:51.028] RTNETLINK answers: File exists [2025-09-24 07:59:51.085] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 07:59:51.085] ubi1:dml_code is mounted. [2025-09-24 07:59:51.085] ubi2:textures is mounted. [2025-09-24 07:59:51.085] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 07:59:51.085] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 07:59:51.085] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 07:59:51.085] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 07:59:51.085] data.LB_FadeInType0=100 [2025-09-24 07:59:51.085] data.CHLH_FadeInType0=0 [2025-09-24 07:59:51.085] data.WU_FadeInDelay=0 [2025-09-24 07:59:51.085] max_time_out=0 [2025-09-24 07:59:51.085] No splash screen [2025-09-24 07:59:51.085] stop dss Done [2025-09-24 07:59:51.170] /dev/mem opened. [2025-09-24 07:59:51.170] Memory mapped at address 0xffffb656a000. [2025-09-24 07:59:51.170] Read at address 0x00600018 (0xffffb656a018): 0x00000000 [2025-09-24 07:59:51.170] Write at address 0x00600018 (0xffffb656a018): 0x00400040, readback 0x00400040 [2025-09-24 07:59:51.197] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 07:59:51.197] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 07:59:51.373] Loaded PowerVR consumer services. [2025-09-24 07:59:51.469] Waiting data available... [2025-09-24 07:59:51.485] 512+0 records in [2025-09-24 07:59:51.485] 512+0 records out [2025-09-24 07:59:51.517] Starting syslogd/klogd: done [2025-09-24 07:59:51.533] DML Start [2025-09-24 07:59:51.709] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 07:59:51.949] DML res1: 0 [2025-09-24 07:59:52.333] Read DML Algo certificate (mtd31) and save to file [2025-09-24 07:59:52.354] Read Success [2025-09-24 07:59:52.354] Verifying certificate... [2025-09-24 07:59:52.593] Verified OK [2025-09-24 07:59:52.609] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 07:59:54.209] Verified OK [2025-09-24 07:59:54.225] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 07:59:54.861] Verified OK [2025-09-24 07:59:54.861] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 07:59:57.464] fs.protected_hardlinks = 1 [2025-09-24 07:59:57.464] fs.protected_symlinks = 1 [2025-09-24 07:59:57.464] kernel.modules_disabled = 1 [2025-09-24 07:59:57.656] [2025-09-24 07:59:57.656] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 07:59:59.029] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:00:06.655] SBL1:1210.0.1.0 [2025-09-24 08:00:06.703] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:00:08.270] SBL2:1210.0.1.0 [2025-09-24 08:00:08.317] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:00:08.414] j-A [2025-09-24 08:00:15.769] The R5 Autosar Classic is running [2025-09-24 08:00:15.791] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:00:15.791] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:00:16.398] INIT: version 2.96 booting [2025-09-24 08:00:16.509] INIT: Entering runlevel: 5 [2025-09-24 08:00:16.654] mtd24 attached [2025-09-24 08:00:16.669] mtd32 attached [2025-09-24 08:00:16.685] mtd28 attached [2025-09-24 08:00:16.701] ubi0:textures is mounted. [2025-09-24 08:00:16.733] RTNETLINK answers: File exists [2025-09-24 08:00:16.771] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:00:16.771] ubi2:animations is mounted. [2025-09-24 08:00:16.771] ubi1:dml_code is mounted. [2025-09-24 08:00:16.771] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:00:16.771] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:00:16.771] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:00:16.771] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:00:16.792] data.LB_FadeInType0=100 [2025-09-24 08:00:16.792] data.CHLH_FadeInType0=0 [2025-09-24 08:00:16.792] data.WU_FadeInDelay=0 [2025-09-24 08:00:16.792] max_time_out=0 [2025-09-24 08:00:16.792] No splash screen [2025-09-24 08:00:16.792] stop dss Done [2025-09-24 08:00:16.840] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:00:16.840] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:00:16.856] /dev/mem opened. [2025-09-24 08:00:16.856] Memory mapped at address 0xffffa36bd000. [2025-09-24 08:00:16.882] Read at address 0x00600018 (0xffffa36bd018): 0x00000000 [2025-09-24 08:00:16.882] Write at address 0x00600018 (0xffffa36bd018): 0x00400040, readback 0x00400040 [2025-09-24 08:00:16.961] Loaded PowerVR consumer services. [2025-09-24 08:00:17.122] Waiting data available... [2025-09-24 08:00:17.137] 512+0 records in [2025-09-24 08:00:17.137] 512+0 records out [2025-09-24 08:00:17.153] Starting syslogd/klogd: done [2025-09-24 08:00:17.185] DML Start [2025-09-24 08:00:17.345] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:00:17.617] DML res1: 0 [2025-09-24 08:00:17.983] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:00:17.983] Read Success [2025-09-24 08:00:17.983] Verifying certificate... [2025-09-24 08:00:18.238] Verified OK [2025-09-24 08:00:18.270] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:00:19.962] Verified OK [2025-09-24 08:00:19.962] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:00:20.602] Verified OK [2025-09-24 08:00:20.602] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:00:23.238] fs.protected_hardlinks = 1 [2025-09-24 08:00:23.238] fs.protected_symlinks = 1 [2025-09-24 08:00:23.238] kernel.modules_disabled = 1 [2025-09-24 08:00:23.413] [2025-09-24 08:00:23.413] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:00:24.666] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:00:32.363] SBL1:1210.0.1.0 [2025-09-24 08:00:32.411] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:00:33.977] SBL2:1210.0.1.0 [2025-09-24 08:00:34.024] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:00:34.121] j-A [2025-09-24 08:00:41.475] The R5 Autosar Classic is running [2025-09-24 08:00:41.499] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:00:41.499] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:00:42.106] INIT: version 2.96 booting [2025-09-24 08:00:42.218] INIT: Entering runlevel: 5 [2025-09-24 08:00:42.362] mtd24 attached [2025-09-24 08:00:42.378] mtd28 attached [2025-09-24 08:00:42.426] ubi0:textures is mounted. [2025-09-24 08:00:42.442] ubi1:animations is mounted. [2025-09-24 08:00:42.442] mtd32 attached [2025-09-24 08:00:42.458] RTNETLINK answers: File exists [2025-09-24 08:00:42.514] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:00:42.514] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:00:42.514] ubi2:dml_code is mounted. [2025-09-24 08:00:42.514] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:00:42.514] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:00:42.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:00:42.514] data.LB_FadeInType0=100 [2025-09-24 08:00:42.514] data.CHLH_FadeInType0=0 [2025-09-24 08:00:42.514] data.WU_FadeInDelay=0 [2025-09-24 08:00:42.514] max_time_out=0 [2025-09-24 08:00:42.514] No splash screen [2025-09-24 08:00:42.514] stop dss Done [2025-09-24 08:00:42.544] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:00:42.544] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:00:42.599] /dev/mem opened. [2025-09-24 08:00:42.599] Memory mapped at address 0xffffaf1aa000. [2025-09-24 08:00:42.599] Read at address 0x00600018 (0xffffaf1aa018): 0x00000000 [2025-09-24 08:00:42.599] Write at address 0x00600018 (0xffffaf1aa018): 0x00400040, readback 0x00400040 [2025-09-24 08:00:42.776] Loaded PowerVR consumer services. [2025-09-24 08:00:42.872] Waiting data available... [2025-09-24 08:00:42.888] 512+0 records in [2025-09-24 08:00:42.888] 512+0 records out [2025-09-24 08:00:42.919] Starting syslogd/klogd: done [2025-09-24 08:00:42.935] DML Start [2025-09-24 08:00:43.128] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:00:43.335] DML res1: 0 [2025-09-24 08:00:43.831] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:00:43.852] Read Success [2025-09-24 08:00:43.852] Verifying certificate... [2025-09-24 08:00:44.076] Verified OK [2025-09-24 08:00:44.108] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:00:45.761] Verified OK [2025-09-24 08:00:45.761] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:00:46.270] Verified OK [2025-09-24 08:00:46.270] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:00:48.955] fs.protected_hardlinks = 1 [2025-09-24 08:00:48.955] fs.protected_symlinks = 1 [2025-09-24 08:00:48.971] kernel.modules_disabled = 1 [2025-09-24 08:00:49.163] [2025-09-24 08:00:49.163] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:00:50.355] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:00:58.074] SBL1:1210.0.1.0 [2025-09-24 08:00:58.122] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:00:59.689] SBL2:1210.0.1.0 [2025-09-24 08:00:59.737] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:00:59.833] j-A [2025-09-24 08:01:07.186] The R5 Autosar Classic is running [2025-09-24 08:01:07.211] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:01:07.211] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:01:07.819] INIT: version 2.96 booting [2025-09-24 08:01:07.930] INIT: Entering runlevel: 5 [2025-09-24 08:01:08.091] mtd32 attached [2025-09-24 08:01:08.107] mtd28 attached [2025-09-24 08:01:08.107] mtd24 attached [2025-09-24 08:01:08.155] RTNETLINK answers: File exists [2025-09-24 08:01:08.223] ubi0:dml_code is mounted. [2025-09-24 08:01:08.223] ubi1:animations is mounted. [2025-09-24 08:01:08.223] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:01:08.223] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:01:08.223] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:01:08.223] ubi2:textures is mounted. [2025-09-24 08:01:08.223] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:01:08.223] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:01:08.223] data.LB_FadeInType0=100 [2025-09-24 08:01:08.223] data.CHLH_FadeInType0=0 [2025-09-24 08:01:08.223] data.WU_FadeInDelay=0 [2025-09-24 08:01:08.223] max_time_out=0 [2025-09-24 08:01:08.223] No splash screen [2025-09-24 08:01:08.223] stop dss Done [2025-09-24 08:01:08.307] /dev/mem opened. [2025-09-24 08:01:08.307] Memory mapped at address 0xffffbe777000. [2025-09-24 08:01:08.307] Read at address 0x00600018 (0xffffbe777018): 0x00000000 [2025-09-24 08:01:08.307] Write at address 0x00600018 (0xffffbe777018): 0x00400040, readback 0x00400040 [2025-09-24 08:01:08.307] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:01:08.307] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:01:08.451] Loaded PowerVR consumer services. [2025-09-24 08:01:08.564] Waiting data available... [2025-09-24 08:01:08.580] 512+0 records in [2025-09-24 08:01:08.580] 512+0 records out [2025-09-24 08:01:08.612] Starting syslogd/klogd: done [2025-09-24 08:01:08.628] DML Start [2025-09-24 08:01:08.835] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:01:09.075] DML res1: 0 [2025-09-24 08:01:09.459] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:01:09.475] Read Success [2025-09-24 08:01:09.475] Verifying certificate... [2025-09-24 08:01:09.714] Verified OK [2025-09-24 08:01:09.714] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:01:11.390] Verified OK [2025-09-24 08:01:11.390] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:01:12.090] Verified OK [2025-09-24 08:01:12.090] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:01:14.712] fs.protected_hardlinks = 1 [2025-09-24 08:01:14.742] fs.protected_symlinks = 1 [2025-09-24 08:01:14.742] kernel.modules_disabled = 1 [2025-09-24 08:01:14.934] [2025-09-24 08:01:14.934] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:01:16.147] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:01:23.802] SBL1:1210.0.1.0 [2025-09-24 08:01:23.850] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:01:25.417] SBL2:1210.0.1.0 [2025-09-24 08:01:25.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:01:25.562] j-A [2025-09-24 08:01:32.915] The R5 Autosar Classic is running [2025-09-24 08:01:32.940] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:01:32.940] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:01:33.547] INIT: version 2.96 booting [2025-09-24 08:01:33.659] INIT: Entering runlevel: 5 [2025-09-24 08:01:33.819] mtd24 attached [2025-09-24 08:01:33.819] mtd32 attached [2025-09-24 08:01:33.835] mtd28 attached [2025-09-24 08:01:33.883] ubi0:textures is mounted. [2025-09-24 08:01:33.899] RTNETLINK answers: File exists [2025-09-24 08:01:33.899] ubi1:dml_code is mounted. [2025-09-24 08:01:33.951] ubi2:animations is mounted. [2025-09-24 08:01:33.951] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:01:33.951] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:01:33.952] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:01:33.952] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:01:33.952] data.LB_FadeInType0=100 [2025-09-24 08:01:33.952] data.CHLH_FadeInType0=0 [2025-09-24 08:01:33.952] data.WU_FadeInDelay=0 [2025-09-24 08:01:33.952] max_time_out=0 [2025-09-24 08:01:33.952] No splash screen [2025-09-24 08:01:33.952] stop dss Done [2025-09-24 08:01:33.952] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:01:34.025] /dev/mem opened. [2025-09-24 08:01:34.025] Memory mapped at address 0xffff8a58d000. [2025-09-24 08:01:34.025] Read at address 0x00600018 (0xffff8a58d018): 0x00000000 [2025-09-24 08:01:34.025] Write at address 0x00600018 (0xffff8a58d018): 0x00400040, readback 0x00400040 [2025-09-24 08:01:34.025] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:01:34.041] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:01:34.280] Waiting data available... [2025-09-24 08:01:34.296] Loaded PowerVR consumer services. [2025-09-24 08:01:34.328] 512+0 records in [2025-09-24 08:01:34.328] 512+0 records out [2025-09-24 08:01:34.360] Starting syslogd/klogd: done [2025-09-24 08:01:34.376] DML Start [2025-09-24 08:01:34.537] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:01:34.776] DML res1: 0 [2025-09-24 08:01:35.233] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:01:35.233] Read Success [2025-09-24 08:01:35.233] Verifying certificate... [2025-09-24 08:01:35.474] Verified OK [2025-09-24 08:01:35.489] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:01:37.072] Verified OK [2025-09-24 08:01:37.073] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:01:37.689] Verified OK [2025-09-24 08:01:37.689] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:01:40.262] fs.protected_hardlinks = 1 [2025-09-24 08:01:40.262] fs.protected_symlinks = 1 [2025-09-24 08:01:40.262] kernel.modules_disabled = 1 [2025-09-24 08:01:40.454] [2025-09-24 08:01:40.454] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:01:41.828] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:01:49.496] SBL1:1210.0.1.0 [2025-09-24 08:01:49.544] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:01:51.111] SBL2:1210.0.1.0 [2025-09-24 08:01:51.159] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:01:51.255] j-A [2025-09-24 08:01:58.608] The R5 Autosar Classic is running [2025-09-24 08:01:58.633] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:01:58.633] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:01:59.240] INIT: version 2.96 booting [2025-09-24 08:01:59.352] INIT: Entering runlevel: 5 [2025-09-24 08:01:59.512] mtd24 attached [2025-09-24 08:01:59.528] mtd32 attached [2025-09-24 08:01:59.528] mtd28 attached [2025-09-24 08:01:59.560] ubi0:textures is mounted. [2025-09-24 08:01:59.642] RTNETLINK answers: File exists [2025-09-24 08:01:59.642] ubi2:animations is mounted. [2025-09-24 08:01:59.642] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:01:59.642] ubi1:dml_code is mounted. [2025-09-24 08:01:59.642] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:01:59.642] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:01:59.642] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:01:59.642] data.LB_FadeInType0=100 [2025-09-24 08:01:59.642] data.CHLH_FadeInType0=0 [2025-09-24 08:01:59.642] data.WU_FadeInDelay=0 [2025-09-24 08:01:59.642] max_time_out=0 [2025-09-24 08:01:59.642] No splash screen [2025-09-24 08:01:59.642] stop dss Done [2025-09-24 08:01:59.642] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:01:59.710] /dev/mem opened. [2025-09-24 08:01:59.710] Memory mapped at address 0xffffb2786000. [2025-09-24 08:01:59.710] Read at address 0x00600018 (0xffffb2786018): 0x00000000 [2025-09-24 08:01:59.710] Write at address 0x00600018 (0xffffb2786018): 0x00400040, readback 0x00400040 [2025-09-24 08:01:59.742] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:01:59.742] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:01:59.885] Loaded PowerVR consumer services. [2025-09-24 08:01:59.982] Waiting data available... [2025-09-24 08:01:59.998] 512+0 records in [2025-09-24 08:01:59.998] 512+0 records out [2025-09-24 08:02:00.046] Starting syslogd/klogd: done [2025-09-24 08:02:00.062] DML Start [2025-09-24 08:02:00.253] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:02:00.477] DML res1: 0 [2025-09-24 08:02:00.904] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:02:00.904] Read Success [2025-09-24 08:02:00.904] Verifying certificate... [2025-09-24 08:02:01.144] Verified OK [2025-09-24 08:02:01.160] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:02:02.879] Verified OK [2025-09-24 08:02:02.879] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:02:03.515] Verified OK [2025-09-24 08:02:03.515] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:02:05.962] fs.protected_hardlinks = 1 [2025-09-24 08:02:05.978] fs.protected_symlinks = 1 [2025-09-24 08:02:05.978] kernel.modules_disabled = 1 [2025-09-24 08:02:06.170] [2025-09-24 08:02:06.170] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:02:07.512] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:02:15.205] SBL1:1210.0.1.0 [2025-09-24 08:02:15.253] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:02:16.819] SBL2:1210.0.1.0 [2025-09-24 08:02:16.867] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:02:16.963] j-A [2025-09-24 08:02:24.316] The R5 Autosar Classic is running [2025-09-24 08:02:24.341] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:02:24.341] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:02:24.948] INIT: version 2.96 booting [2025-09-24 08:02:25.061] INIT: Entering runlevel: 5 [2025-09-24 08:02:25.220] mtd28 attached [2025-09-24 08:02:25.220] mtd24 attached [2025-09-24 08:02:25.236] mtd32 attached [2025-09-24 08:02:25.285] ubi0:animations is mounted. [2025-09-24 08:02:25.285] RTNETLINK answers: File exists [2025-09-24 08:02:25.347] ubi1:textures is mounted. [2025-09-24 08:02:25.347] ubi2:dml_code is mounted. [2025-09-24 08:02:25.347] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:02:25.347] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:02:25.347] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:02:25.347] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:02:25.347] data.LB_FadeInType0=100 [2025-09-24 08:02:25.347] data.CHLH_FadeInType0=0 [2025-09-24 08:02:25.347] data.WU_FadeInDelay=0 [2025-09-24 08:02:25.347] max_time_out=0 [2025-09-24 08:02:25.347] No splash screen [2025-09-24 08:02:25.347] stop dss Done [2025-09-24 08:02:25.347] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:02:25.379] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:02:25.420] /dev/mem opened. [2025-09-24 08:02:25.420] Memory mapped at address 0xffff822e3000. [2025-09-24 08:02:25.420] Read at address 0x00600018 (0xffff822e3018): 0x00000000 [2025-09-24 08:02:25.420] Write at address 0x00600018 (0xffff822e3018): 0x00400040, readback 0x00400040 [2025-09-24 08:02:25.420] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:02:25.676] Loaded PowerVR consumer services. [2025-09-24 08:02:25.739] Waiting data available... [2025-09-24 08:02:25.755] 512+0 records in [2025-09-24 08:02:25.755] 512+0 records out [2025-09-24 08:02:25.787] Starting syslogd/klogd: done [2025-09-24 08:02:25.803] DML Start [2025-09-24 08:02:25.994] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:02:26.234] DML res1: 0 [2025-09-24 08:02:26.618] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:02:26.618] Read Success [2025-09-24 08:02:26.618] Verifying certificate... [2025-09-24 08:02:26.857] Verified OK [2025-09-24 08:02:26.873] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:02:28.737] Verified OK [2025-09-24 08:02:28.737] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:02:29.287] Verified OK [2025-09-24 08:02:29.287] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:02:31.701] fs.protected_hardlinks = 1 [2025-09-24 08:02:31.701] fs.protected_symlinks = 1 [2025-09-24 08:02:31.717] kernel.modules_disabled = 1 [2025-09-24 08:02:31.909] [2025-09-24 08:02:31.909] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:02:33.344] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:02:40.923] SBL1:1210.0.1.0 [2025-09-24 08:02:40.955] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:02:42.537] SBL2:1210.0.1.0 [2025-09-24 08:02:42.568] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:02:42.681] j-A [2025-09-24 08:02:50.034] The R5 Autosar Classic is running [2025-09-24 08:02:50.034] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:02:50.055] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:02:50.663] INIT: version 2.96 booting [2025-09-24 08:02:50.774] INIT: Entering runlevel: 5 [2025-09-24 08:02:50.934] mtd28 attached [2025-09-24 08:02:50.950] mtd32 attached [2025-09-24 08:02:50.950] mtd24 attached [2025-09-24 08:02:50.982] ubi0:animations is mounted. [2025-09-24 08:02:51.065] RTNETLINK answers: File exists [2025-09-24 08:02:51.065] ubi2:textures is mounted. [2025-09-24 08:02:51.065] ubi1:dml_code is mounted. [2025-09-24 08:02:51.065] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:02:51.065] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:02:51.065] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:02:51.065] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:02:51.065] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:02:51.065] data.LB_FadeInType0=100 [2025-09-24 08:02:51.065] data.CHLH_FadeInType0=0 [2025-09-24 08:02:51.065] data.WU_FadeInDelay=0 [2025-09-24 08:02:51.065] max_time_out=0 [2025-09-24 08:02:51.065] No splash screen [2025-09-24 08:02:51.065] stop dss Done [2025-09-24 08:02:51.141] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:02:51.141] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:02:51.141] /dev/mem opened. [2025-09-24 08:02:51.141] Memory mapped at address 0xffffbe8e4000. [2025-09-24 08:02:51.141] Read at address 0x00600018 (0xffffbe8e4018): 0x00000000 [2025-09-24 08:02:51.141] Write at address 0x00600018 (0xffffbe8e4018): 0x00400040, readback 0x00400040 [2025-09-24 08:02:51.268] Loaded PowerVR consumer services. [2025-09-24 08:02:51.396] Waiting data available... [2025-09-24 08:02:51.412] 512+0 records in [2025-09-24 08:02:51.412] 512+0 records out [2025-09-24 08:02:51.428] Starting syslogd/klogd: done [2025-09-24 08:02:51.460] DML Start [2025-09-24 08:02:51.604] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:02:51.811] DML res1: 0 [2025-09-24 08:02:52.355] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:02:52.371] Read Success [2025-09-24 08:02:52.371] Verifying certificate... [2025-09-24 08:02:52.627] Verified OK [2025-09-24 08:02:52.643] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:02:54.268] Verified OK [2025-09-24 08:02:54.268] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:02:54.827] Verified OK [2025-09-24 08:02:54.827] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:02:57.481] fs.protected_hardlinks = 1 [2025-09-24 08:02:57.497] fs.protected_symlinks = 1 [2025-09-24 08:02:57.497] kernel.modules_disabled = 1 [2025-09-24 08:02:57.673] [2025-09-24 08:02:57.673] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:02:58.946] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:03:06.631] SBL1:1210.0.1.0 [2025-09-24 08:03:06.679] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:03:08.245] SBL2:1210.0.1.0 [2025-09-24 08:03:08.293] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:03:08.390] j-A [2025-09-24 08:03:15.743] The R5 Autosar Classic is running [2025-09-24 08:03:15.768] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:03:15.768] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:03:16.375] INIT: version 2.96 booting [2025-09-24 08:03:16.487] INIT: Entering runlevel: 5 [2025-09-24 08:03:16.647] mtd28 attached [2025-09-24 08:03:16.663] mtd32 attached [2025-09-24 08:03:16.663] mtd24 attached [2025-09-24 08:03:16.711] ubi0:animations is mounted. [2025-09-24 08:03:16.711] RTNETLINK answers: File exists [2025-09-24 08:03:16.777] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:03:16.777] ubi2:textures is mounted. [2025-09-24 08:03:16.777] ubi1:dml_code is mounted. [2025-09-24 08:03:16.777] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:03:16.777] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:03:16.777] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:03:16.777] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:03:16.777] data.LB_FadeInType0=100 [2025-09-24 08:03:16.777] data.CHLH_FadeInType0=0 [2025-09-24 08:03:16.777] data.WU_FadeInDelay=0 [2025-09-24 08:03:16.777] max_time_out=0 [2025-09-24 08:03:16.777] No splash screen [2025-09-24 08:03:16.777] stop dss Done [2025-09-24 08:03:16.862] /dev/mem opened. [2025-09-24 08:03:16.862] Memory mapped at address 0xffff806ce000. [2025-09-24 08:03:16.862] Read at address 0x00600018 (0xffff806ce018): 0x00000000 [2025-09-24 08:03:16.862] Write at address 0x00600018 (0xffff806ce018): 0x00400040, readback 0x00400040 [2025-09-24 08:03:16.862] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:03:16.862] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:03:17.071] Loaded PowerVR consumer services. [2025-09-24 08:03:17.103] Waiting data available... [2025-09-24 08:03:17.135] 512+0 records in [2025-09-24 08:03:17.135] 512+0 records out [2025-09-24 08:03:17.166] Starting syslogd/klogd: done [2025-09-24 08:03:17.182] DML Start [2025-09-24 08:03:17.375] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:03:17.567] DML res1: 0 [2025-09-24 08:03:18.022] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:03:18.022] Read Success [2025-09-24 08:03:18.022] Verifying certificate... [2025-09-24 08:03:18.262] Verified OK [2025-09-24 08:03:18.278] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:03:20.046] Verified OK [2025-09-24 08:03:20.046] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:03:20.647] Verified OK [2025-09-24 08:03:20.647] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:03:23.205] fs.protected_hardlinks = 1 [2025-09-24 08:03:23.205] fs.protected_symlinks = 1 [2025-09-24 08:03:23.221] kernel.modules_disabled = 1 [2025-09-24 08:03:23.412] [2025-09-24 08:03:23.412] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:03:24.616] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:03:32.342] SBL1:1210.0.1.0 [2025-09-24 08:03:32.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:03:33.956] SBL2:1210.0.1.0 [2025-09-24 08:03:34.005] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:03:34.101] j-A [2025-09-24 08:03:41.455] The R5 Autosar Classic is running [2025-09-24 08:03:41.455] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:03:41.476] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:03:42.082] INIT: version 2.96 booting [2025-09-24 08:03:42.195] INIT: Entering runlevel: 5 [2025-09-24 08:03:42.354] mtd24 attached [2025-09-24 08:03:42.354] mtd32 attached [2025-09-24 08:03:42.370] mtd28 attached [2025-09-24 08:03:42.386] ubi0:textures is mounted. [2025-09-24 08:03:42.419] ubi1:dml_code is mounted. [2025-09-24 08:03:42.419] RTNETLINK answers: File exists [2025-09-24 08:03:42.476] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:03:42.476] ubi2:animations is mounted. [2025-09-24 08:03:42.476] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:03:42.476] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:03:42.476] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:03:42.476] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:03:42.476] data.LB_FadeInType0=100 [2025-09-24 08:03:42.476] data.CHLH_FadeInType0=0 [2025-09-24 08:03:42.476] data.WU_FadeInDelay=0 [2025-09-24 08:03:42.476] max_time_out=0 [2025-09-24 08:03:42.476] No splash screen [2025-09-24 08:03:42.476] stop dss Done [2025-09-24 08:03:42.555] /dev/mem opened. [2025-09-24 08:03:42.555] Memory mapped at address 0xffffa6c01000. [2025-09-24 08:03:42.555] Read at address 0x00600018 (0xffffa6c01018): 0x00000000 [2025-09-24 08:03:42.555] Write at address 0x00600018 (0xffffa6c01018): 0x00400040, readback 0x00400040 [2025-09-24 08:03:42.555] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:03:42.571] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:03:42.683] Loaded PowerVR consumer services. [2025-09-24 08:03:42.812] Waiting data available... [2025-09-24 08:03:42.828] 512+0 records in [2025-09-24 08:03:42.828] 512+0 records out [2025-09-24 08:03:42.875] Starting syslogd/klogd: done [2025-09-24 08:03:42.892] DML Start [2025-09-24 08:03:43.035] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:03:43.259] DML res1: 0 [2025-09-24 08:03:43.754] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:03:43.770] Read Success [2025-09-24 08:03:43.770] Verifying certificate... [2025-09-24 08:03:44.026] Verified OK [2025-09-24 08:03:44.042] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:03:45.497] Verified OK [2025-09-24 08:03:45.513] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:03:46.180] Verified OK [2025-09-24 08:03:46.180] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:03:48.898] fs.protected_hardlinks = 1 [2025-09-24 08:03:48.914] fs.protected_symlinks = 1 [2025-09-24 08:03:48.914] kernel.modules_disabled = 1 [2025-09-24 08:03:49.121] [2025-09-24 08:03:49.121] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:03:50.328] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:03:58.059] SBL1:1210.0.1.0 [2025-09-24 08:03:58.107] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:03:59.673] SBL2:1210.0.1.0 [2025-09-24 08:03:59.721] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:03:59.833] j-A [2025-09-24 08:04:07.172] The R5 Autosar Classic is running [2025-09-24 08:04:07.197] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:04:07.197] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:04:07.804] INIT: version 2.96 booting [2025-09-24 08:04:07.916] INIT: Entering runlevel: 5 [2025-09-24 08:04:08.076] mtd32 attached [2025-09-24 08:04:08.076] mtd24 attached [2025-09-24 08:04:08.092] mtd28 attached [2025-09-24 08:04:08.124] ubi0:dml_code is mounted. [2025-09-24 08:04:08.140] RTNETLINK answers: File exists [2025-09-24 08:04:08.203] ubi1:textures is mounted. [2025-09-24 08:04:08.203] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:04:08.203] ubi2:animations is mounted. [2025-09-24 08:04:08.203] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:04:08.203] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:04:08.203] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:04:08.203] data.LB_FadeInType0=100 [2025-09-24 08:04:08.203] data.CHLH_FadeInType0=0 [2025-09-24 08:04:08.203] data.WU_FadeInDelay=0 [2025-09-24 08:04:08.203] max_time_out=0 [2025-09-24 08:04:08.203] No splash screen [2025-09-24 08:04:08.203] stop dss Done [2025-09-24 08:04:08.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:04:08.272] /dev/mem opened. [2025-09-24 08:04:08.272] Memory mapped at address 0xffff84e23000. [2025-09-24 08:04:08.272] Read at address 0x00600018 (0xffff84e23018): 0x00000000 [2025-09-24 08:04:08.272] Write at address 0x00600018 (0xffff84e23018): 0x00400040, readback 0x00400040 [2025-09-24 08:04:08.272] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:04:08.272] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:04:08.383] Loaded PowerVR consumer services. [2025-09-24 08:04:08.544] Waiting data available... [2025-09-24 08:04:08.560] 512+0 records in [2025-09-24 08:04:08.560] 512+0 records out [2025-09-24 08:04:08.591] Starting syslogd/klogd: done [2025-09-24 08:04:08.607] DML Start [2025-09-24 08:04:08.768] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:04:09.007] DML res1: 0 [2025-09-24 08:04:09.439] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:04:09.455] Read Success [2025-09-24 08:04:09.455] Verifying certificate... [2025-09-24 08:04:09.711] Verified OK [2025-09-24 08:04:09.727] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:04:11.448] Verified OK [2025-09-24 08:04:11.448] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:04:12.024] Verified OK [2025-09-24 08:04:12.024] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:04:14.549] fs.protected_hardlinks = 1 [2025-09-24 08:04:14.565] fs.protected_symlinks = 1 [2025-09-24 08:04:14.565] kernel.modules_disabled = 1 [2025-09-24 08:04:14.773] [2025-09-24 08:04:14.773] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:04:16.125] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:04:23.765] SBL1:1210.0.1.0 [2025-09-24 08:04:23.797] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:04:25.381] SBL2:1210.0.1.0 [2025-09-24 08:04:25.412] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:04:25.524] j-A [2025-09-24 08:04:32.879] The R5 Autosar Classic is running [2025-09-24 08:04:32.879] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:04:32.900] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:04:33.507] INIT: version 2.96 booting [2025-09-24 08:04:33.620] INIT: Entering runlevel: 5 [2025-09-24 08:04:33.763] mtd24 attached [2025-09-24 08:04:33.779] mtd28 attached [2025-09-24 08:04:33.795] mtd32 attached [2025-09-24 08:04:33.827] ubi0:textures is mounted. [2025-09-24 08:04:33.843] RTNETLINK answers: File exists [2025-09-24 08:04:33.843] ubi1:animations is mounted. [2025-09-24 08:04:33.899] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:04:33.899] ubi2:dml_code is mounted. [2025-09-24 08:04:33.899] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:04:33.899] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:04:33.899] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:04:33.899] data.LB_FadeInType0=100 [2025-09-24 08:04:33.899] data.CHLH_FadeInType0=0 [2025-09-24 08:04:33.899] data.WU_FadeInDelay=0 [2025-09-24 08:04:33.899] max_time_out=0 [2025-09-24 08:04:33.899] No splash screen [2025-09-24 08:04:33.899] stop dss Done [2025-09-24 08:04:33.899] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:04:33.947] /dev/mem opened. [2025-09-24 08:04:33.947] Memory mapped at address 0xffff83aba000. [2025-09-24 08:04:33.988] Read at address 0x00600018 (0xffff83aba018): 0x00000000 [2025-09-24 08:04:33.988] Write at address 0x00600018 (0xffff83aba018): 0x00400040, readback 0x00400040 [2025-09-24 08:04:33.988] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:04:34.004] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:04:34.051] Loaded PowerVR consumer services. [2025-09-24 08:04:34.227] Waiting data available... [2025-09-24 08:04:34.227] 512+0 records in [2025-09-24 08:04:34.243] 512+0 records out [2025-09-24 08:04:34.275] Starting syslogd/klogd: done [2025-09-24 08:04:34.307] DML Start [2025-09-24 08:04:34.483] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:04:34.755] DML res1: 0 [2025-09-24 08:04:35.130] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:04:35.130] Read Success [2025-09-24 08:04:35.130] Verifying certificate... [2025-09-24 08:04:35.354] Verified OK [2025-09-24 08:04:35.370] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:04:36.914] Verified OK [2025-09-24 08:04:36.914] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:04:37.545] Verified OK [2025-09-24 08:04:37.545] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:04:40.295] fs.protected_hardlinks = 1 [2025-09-24 08:04:40.295] fs.protected_symlinks = 1 [2025-09-24 08:04:40.311] kernel.modules_disabled = 1 [2025-09-24 08:04:40.503] [2025-09-24 08:04:40.503] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:04:41.801] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:04:49.461] SBL1:1210.0.1.0 [2025-09-24 08:04:49.508] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:04:51.076] SBL2:1210.0.1.0 [2025-09-24 08:04:51.124] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:04:51.219] j-A [2025-09-24 08:04:58.575] The R5 Autosar Classic is running [2025-09-24 08:04:58.598] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:04:58.598] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:04:59.205] INIT: version 2.96 booting [2025-09-24 08:04:59.317] INIT: Entering runlevel: 5 [2025-09-24 08:04:59.461] mtd28 attached [2025-09-24 08:04:59.477] mtd32 attached [2025-09-24 08:04:59.493] mtd24 attached [2025-09-24 08:04:59.541] RTNETLINK answers: File exists [2025-09-24 08:04:59.541] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:04:59.582] ubi0:animations is mounted. [2025-09-24 08:04:59.582] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:04:59.582] ubi2:textures is mounted. [2025-09-24 08:04:59.582] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:04:59.582] ubi1:dml_code is mounted. [2025-09-24 08:04:59.582] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:04:59.582] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:04:59.607] data.LB_FadeInType0=100 [2025-09-24 08:04:59.607] data.CHLH_FadeInType0=0 [2025-09-24 08:04:59.607] data.WU_FadeInDelay=0 [2025-09-24 08:04:59.607] max_time_out=0 [2025-09-24 08:04:59.607] No splash screen [2025-09-24 08:04:59.607] stop dss Done [2025-09-24 08:04:59.623] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:04:59.623] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:04:59.674] /dev/mem opened. [2025-09-24 08:04:59.674] Memory mapped at address 0xffff9b94b000. [2025-09-24 08:04:59.674] Read at address 0x00600018 (0xffff9b94b018): 0x00000000 [2025-09-24 08:04:59.674] Write at address 0x00600018 (0xffff9b94b018): 0x00400040, readback 0x00400040 [2025-09-24 08:04:59.898] Loaded PowerVR consumer services. [2025-09-24 08:04:59.930] Waiting data available... [2025-09-24 08:04:59.962] 512+0 records in [2025-09-24 08:04:59.962] 512+0 records out [2025-09-24 08:04:59.978] Starting syslogd/klogd: done [2025-09-24 08:04:59.994] DML Start [2025-09-24 08:05:00.169] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:05:00.393] DML res1: 0 [2025-09-24 08:05:00.868] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:05:00.868] Read Success [2025-09-24 08:05:00.868] Verifying certificate... [2025-09-24 08:05:01.108] Verified OK [2025-09-24 08:05:01.124] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:05:02.735] Verified OK [2025-09-24 08:05:02.735] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:05:03.342] Verified OK [2025-09-24 08:05:03.342] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:05:06.023] fs.protected_hardlinks = 1 [2025-09-24 08:05:06.023] fs.protected_symlinks = 1 [2025-09-24 08:05:06.023] kernel.modules_disabled = 1 [2025-09-24 08:05:06.215] [2025-09-24 08:05:06.215] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:05:07.423] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:05:15.177] SBL1:1210.0.1.0 [2025-09-24 08:05:15.225] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:05:16.792] SBL2:1210.0.1.0 [2025-09-24 08:05:16.840] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:05:16.935] j-A [2025-09-24 08:05:24.290] The R5 Autosar Classic is running [2025-09-24 08:05:24.313] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:05:24.313] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:05:24.920] INIT: version 2.96 booting [2025-09-24 08:05:25.032] INIT: Entering runlevel: 5 [2025-09-24 08:05:25.192] mtd24 attached [2025-09-24 08:05:25.192] mtd28 attached [2025-09-24 08:05:25.208] mtd32 attached [2025-09-24 08:05:25.256] ubi0:textures is mounted. [2025-09-24 08:05:25.256] RTNETLINK answers: File exists [2025-09-24 08:05:25.272] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:05:25.326] ubi1:animations is mounted. [2025-09-24 08:05:25.326] ubi2:dml_code is mounted. [2025-09-24 08:05:25.326] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:05:25.326] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:05:25.326] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:05:25.326] data.LB_FadeInType0=100 [2025-09-24 08:05:25.326] data.CHLH_FadeInType0=0 [2025-09-24 08:05:25.326] data.WU_FadeInDelay=0 [2025-09-24 08:05:25.326] max_time_out=0 [2025-09-24 08:05:25.326] No splash screen [2025-09-24 08:05:25.326] stop dss Done [2025-09-24 08:05:25.326] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:05:25.389] /dev/mem opened. [2025-09-24 08:05:25.389] Memory mapped at address 0xffffba06b000. [2025-09-24 08:05:25.430] Read at address 0x00600018 (0xffffba06b018): 0x00000000 [2025-09-24 08:05:25.430] Write at address 0x00600018 (0xffffba06b018): 0x00400040, readback 0x00400040 [2025-09-24 08:05:25.430] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:05:25.430] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:05:25.638] Loaded PowerVR consumer services. [2025-09-24 08:05:25.670] Waiting data available... [2025-09-24 08:05:25.685] 512+0 records in [2025-09-24 08:05:25.685] 512+0 records out [2025-09-24 08:05:25.701] Starting syslogd/klogd: done [2025-09-24 08:05:25.734] DML Start [2025-09-24 08:05:25.926] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:05:26.165] DML res1: 0 [2025-09-24 08:05:26.579] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:05:26.579] Read Success [2025-09-24 08:05:26.579] Verifying certificate... [2025-09-24 08:05:26.818] Verified OK [2025-09-24 08:05:26.834] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:05:28.542] Verified OK [2025-09-24 08:05:28.542] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:05:29.203] Verified OK [2025-09-24 08:05:29.203] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:05:31.730] fs.protected_hardlinks = 1 [2025-09-24 08:05:31.730] fs.protected_symlinks = 1 [2025-09-24 08:05:31.745] kernel.modules_disabled = 1 [2025-09-24 08:05:31.953] [2025-09-24 08:05:31.953] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:05:33.248] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:05:40.884] SBL1:1210.0.1.0 [2025-09-24 08:05:40.932] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:05:42.499] SBL2:1210.0.1.0 [2025-09-24 08:05:42.547] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:05:42.643] j-A [2025-09-24 08:05:49.998] The R5 Autosar Classic is running [2025-09-24 08:05:50.021] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:05:50.021] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:05:50.628] INIT: version 2.96 booting [2025-09-24 08:05:50.740] INIT: Entering runlevel: 5 [2025-09-24 08:05:50.884] mtd24 attached [2025-09-24 08:05:50.900] mtd28 attached [2025-09-24 08:05:50.916] mtd32 attached [2025-09-24 08:05:50.948] ubi0:textures is mounted. [2025-09-24 08:05:50.964] ubi1:animations is mounted. [2025-09-24 08:05:51.018] RTNETLINK answers: File exists [2025-09-24 08:05:51.018] ubi2:dml_code is mounted. [2025-09-24 08:05:51.018] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:05:51.018] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:05:51.018] data.LB_FadeInType0=100 [2025-09-24 08:05:51.018] data.CHLH_FadeInType0=0 [2025-09-24 08:05:51.018] data.WU_FadeInDelay=0 [2025-09-24 08:05:51.018] max_time_out=0 [2025-09-24 08:05:51.018] No splash screen [2025-09-24 08:05:51.018] stop dss Done [2025-09-24 08:05:51.018] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:05:51.034] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:05:51.034] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:05:51.050] /dev/mem opened. [2025-09-24 08:05:51.050] Memory mapped at address 0xffff96b50000. [2025-09-24 08:05:51.075] Read at address 0x00600018 (0xffff96b50018): 0x00000000 [2025-09-24 08:05:51.075] Write at address 0x00600018 (0xffff96b50018): 0x00400040, readback 0x00400040 [2025-09-24 08:05:51.146] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:05:51.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:05:51.383] Waiting data available... [2025-09-24 08:05:51.383] Loaded PowerVR consumer services. [2025-09-24 08:05:51.399] 512+0 records in [2025-09-24 08:05:51.399] 512+0 records out [2025-09-24 08:05:51.415] Starting syslogd/klogd: done [2025-09-24 08:05:51.448] DML Start [2025-09-24 08:05:51.591] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:05:51.847] DML res1: 0 [2025-09-24 08:05:52.321] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:05:52.321] Read Success [2025-09-24 08:05:52.321] Verifying certificate... [2025-09-24 08:05:52.561] Verified OK [2025-09-24 08:05:52.578] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:05:54.345] Verified OK [2025-09-24 08:05:54.345] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:05:54.824] Verified OK [2025-09-24 08:05:54.840] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:05:57.318] fs.protected_hardlinks = 1 [2025-09-24 08:05:57.318] fs.protected_symlinks = 1 [2025-09-24 08:05:57.334] kernel.modules_disabled = 1 [2025-09-24 08:05:57.542] [2025-09-24 08:05:57.542] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:05:58.869] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:06:06.597] SBL1:1210.0.1.0 [2025-09-24 08:06:06.629] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:06:08.213] SBL2:1210.0.1.0 [2025-09-24 08:06:08.244] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:06:08.356] j-A [2025-09-24 08:06:15.710] The R5 Autosar Classic is running [2025-09-24 08:06:15.710] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:06:15.731] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:06:16.339] INIT: version 2.96 booting [2025-09-24 08:06:16.451] INIT: Entering runlevel: 5 [2025-09-24 08:06:16.610] mtd28 attached [2025-09-24 08:06:16.610] mtd32 attached [2025-09-24 08:06:16.626] mtd24 attached [2025-09-24 08:06:16.674] RTNETLINK answers: File exists [2025-09-24 08:06:16.717] ubi0:animations is mounted. [2025-09-24 08:06:16.717] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:06:16.717] ubi2:textures is mounted. [2025-09-24 08:06:16.717] ubi1:dml_code is mounted. [2025-09-24 08:06:16.717] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:06:16.717] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:06:16.717] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:06:16.717] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:06:16.743] data.LB_FadeInType0=100 [2025-09-24 08:06:16.743] data.CHLH_FadeInType0=0 [2025-09-24 08:06:16.743] data.WU_FadeInDelay=0 [2025-09-24 08:06:16.743] max_time_out=0 [2025-09-24 08:06:16.743] No splash screen [2025-09-24 08:06:16.743] stop dss Done [2025-09-24 08:06:16.828] /dev/mem opened. [2025-09-24 08:06:16.828] Memory mapped at address 0xffffb20b7000. [2025-09-24 08:06:16.828] Read at address 0x00600018 (0xffffb20b7018): 0x00000000 [2025-09-24 08:06:16.828] Write at address 0x00600018 (0xffffb20b7018): 0x00400040, readback 0x00400040 [2025-09-24 08:06:16.859] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:06:16.891] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:06:17.035] Loaded PowerVR consumer services. [2025-09-24 08:06:17.099] Waiting data available... [2025-09-24 08:06:17.115] 512+0 records in [2025-09-24 08:06:17.115] 512+0 records out [2025-09-24 08:06:17.163] Starting syslogd/klogd: done [2025-09-24 08:06:17.163] DML Start [2025-09-24 08:06:17.355] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:06:17.563] DML res1: 0 [2025-09-24 08:06:17.963] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:06:17.978] Read Success [2025-09-24 08:06:17.978] Verifying certificate... [2025-09-24 08:06:18.203] Verified OK [2025-09-24 08:06:18.219] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:06:19.826] Verified OK [2025-09-24 08:06:19.826] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:06:20.418] Verified OK [2025-09-24 08:06:20.418] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:06:23.184] fs.protected_hardlinks = 1 [2025-09-24 08:06:23.184] fs.protected_symlinks = 1 [2025-09-24 08:06:23.200] kernel.modules_disabled = 1 [2025-09-24 08:06:23.392] [2025-09-24 08:06:23.392] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:06:24.575] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:06:32.281] SBL1:1210.0.1.0 [2025-09-24 08:06:32.313] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:06:33.895] SBL2:1210.0.1.0 [2025-09-24 08:06:33.943] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:06:34.039] j-A [2025-09-24 08:06:41.393] The R5 Autosar Classic is running [2025-09-24 08:06:41.415] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:06:41.415] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:06:42.021] INIT: version 2.96 booting [2025-09-24 08:06:42.133] INIT: Entering runlevel: 5 [2025-09-24 08:06:42.293] mtd24 attached [2025-09-24 08:06:42.293] mtd28 attached [2025-09-24 08:06:42.309] mtd32 attached [2025-09-24 08:06:42.357] RTNETLINK answers: File exists [2025-09-24 08:06:42.392] ubi0:textures is mounted. [2025-09-24 08:06:42.392] ubi1:animations is mounted. [2025-09-24 08:06:42.392] ubi2:dml_code is mounted. [2025-09-24 08:06:42.392] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:06:42.392] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:06:42.392] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:06:42.426] data.LB_FadeInType0=100 [2025-09-24 08:06:42.426] data.CHLH_FadeInType0=0 [2025-09-24 08:06:42.426] data.WU_FadeInDelay=0 [2025-09-24 08:06:42.426] max_time_out=0 [2025-09-24 08:06:42.426] No splash screen [2025-09-24 08:06:42.426] stop dss Done [2025-09-24 08:06:42.426] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:06:42.426] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:06:42.481] /dev/mem opened. [2025-09-24 08:06:42.481] Memory mapped at address 0xffff91b43000. [2025-09-24 08:06:42.481] Read at address 0x00600018 (0xffff91b43018): 0x00000000 [2025-09-24 08:06:42.481] Write at address 0x00600018 (0xffff91b43018): 0x00400040, readback 0x00400040 [2025-09-24 08:06:42.513] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:06:42.535] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:06:42.631] Loaded PowerVR consumer services. [2025-09-24 08:06:42.760] Waiting data available... [2025-09-24 08:06:42.775] 512+0 records in [2025-09-24 08:06:42.775] 512+0 records out [2025-09-24 08:06:42.823] Starting syslogd/klogd: done [2025-09-24 08:06:42.839] DML Start [2025-09-24 08:06:43.047] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:06:43.303] DML res1: 0 [2025-09-24 08:06:43.636] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:06:43.636] Read Success [2025-09-24 08:06:43.636] Verifying certificate... [2025-09-24 08:06:43.860] Verified OK [2025-09-24 08:06:43.860] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:06:45.594] Verified OK [2025-09-24 08:06:45.594] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:06:46.131] Verified OK [2025-09-24 08:06:46.131] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:06:48.705] fs.protected_hardlinks = 1 [2025-09-24 08:06:48.705] fs.protected_symlinks = 1 [2025-09-24 08:06:48.721] kernel.modules_disabled = 1 [2025-09-24 08:06:48.913] [2025-09-24 08:06:48.913] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:06:50.352] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:06:57.991] SBL1:1210.0.1.0 [2025-09-24 08:06:58.023] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:06:59.606] SBL2:1210.0.1.0 [2025-09-24 08:06:59.638] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:06:59.750] j-A [2025-09-24 08:07:07.104] The R5 Autosar Classic is running [2025-09-24 08:07:07.104] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:07:07.125] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:07:07.732] INIT: version 2.96 booting [2025-09-24 08:07:07.845] INIT: Entering runlevel: 5 [2025-09-24 08:07:08.004] mtd28 attached [2025-09-24 08:07:08.004] mtd24 attached [2025-09-24 08:07:08.020] mtd32 attached [2025-09-24 08:07:08.068] RTNETLINK answers: File exists [2025-09-24 08:07:08.139] ubi0:animations is mounted. [2025-09-24 08:07:08.139] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:07:08.139] ubi1:textures is mounted. [2025-09-24 08:07:08.139] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:07:08.139] ubi2:dml_code is mounted. [2025-09-24 08:07:08.139] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:07:08.139] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:07:08.139] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:07:08.139] data.LB_FadeInType0=100 [2025-09-24 08:07:08.139] data.CHLH_FadeInType0=0 [2025-09-24 08:07:08.139] data.WU_FadeInDelay=0 [2025-09-24 08:07:08.139] max_time_out=0 [2025-09-24 08:07:08.139] No splash screen [2025-09-24 08:07:08.139] stop dss Done [2025-09-24 08:07:08.186] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:07:08.186] /dev/mem opened. [2025-09-24 08:07:08.186] Memory mapped at address 0xffff81665000. [2025-09-24 08:07:08.218] Read at address 0x00600018 (0xffff81665018): 0x00000000 [2025-09-24 08:07:08.218] Write at address 0x00600018 (0xffff81665018): 0x00400040, readback 0x00400040 [2025-09-24 08:07:08.218] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:07:08.378] Loaded PowerVR consumer services. [2025-09-24 08:07:08.474] Waiting data available... [2025-09-24 08:07:08.490] 512+0 records in [2025-09-24 08:07:08.490] 512+0 records out [2025-09-24 08:07:08.506] Starting syslogd/klogd: done [2025-09-24 08:07:08.538] DML Start [2025-09-24 08:07:08.730] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:07:08.954] DML res1: 0 [2025-09-24 08:07:09.391] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:07:09.391] Read Success [2025-09-24 08:07:09.391] Verifying certificate... [2025-09-24 08:07:09.631] Verified OK [2025-09-24 08:07:09.647] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:07:11.414] Verified OK [2025-09-24 08:07:11.414] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:07:11.941] Verified OK [2025-09-24 08:07:11.941] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:07:14.435] fs.protected_hardlinks = 1 [2025-09-24 08:07:14.451] fs.protected_symlinks = 1 [2025-09-24 08:07:14.467] kernel.modules_disabled = 1 [2025-09-24 08:07:14.643] [2025-09-24 08:07:14.659] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:07:16.024] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:07:23.695] SBL1:1210.0.1.0 [2025-09-24 08:07:23.727] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:07:25.309] SBL2:1210.0.1.0 [2025-09-24 08:07:25.341] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:07:25.453] j-A [2025-09-24 08:07:32.826] The R5 Autosar Classic is running [2025-09-24 08:07:32.826] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:07:32.826] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:07:33.433] INIT: version 2.96 booting [2025-09-24 08:07:33.545] INIT: Entering runlevel: 5 [2025-09-24 08:07:33.689] mtd24 attached [2025-09-24 08:07:33.704] mtd28 attached [2025-09-24 08:07:33.737] ubi0:textures is mounted. [2025-09-24 08:07:33.737] mtd32 attached [2025-09-24 08:07:33.753] ubi1:animations is mounted. [2025-09-24 08:07:33.834] RTNETLINK answers: File exists [2025-09-24 08:07:33.834] ubi2:dml_code is mounted. [2025-09-24 08:07:33.834] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:07:33.834] data.LB_FadeInType0=100 [2025-09-24 08:07:33.834] data.CHLH_FadeInType0=0 [2025-09-24 08:07:33.834] data.WU_FadeInDelay=0 [2025-09-24 08:07:33.834] max_time_out=0 [2025-09-24 08:07:33.834] No splash screen [2025-09-24 08:07:33.834] stop dss Done [2025-09-24 08:07:33.834] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:07:33.834] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:07:33.834] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:07:33.834] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:07:33.866] /dev/mem opened. [2025-09-24 08:07:33.866] Memory mapped at address 0xffffb5cc3000. [2025-09-24 08:07:33.892] Read at address 0x00600018 (0xffffb5cc3018): 0x00000000 [2025-09-24 08:07:33.892] Write at address 0x00600018 (0xffffb5cc3018): 0x00400040, readback 0x00400040 [2025-09-24 08:07:33.924] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:07:33.940] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:07:34.099] Loaded PowerVR consumer services. [2025-09-24 08:07:34.196] Waiting data available... [2025-09-24 08:07:34.212] 512+0 records in [2025-09-24 08:07:34.212] 512+0 records out [2025-09-24 08:07:34.260] Starting syslogd/klogd: done [2025-09-24 08:07:34.260] DML Start [2025-09-24 08:07:34.467] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:07:34.708] DML res1: 0 [2025-09-24 08:07:35.059] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:07:35.075] Read Success [2025-09-24 08:07:35.075] Verifying certificate... [2025-09-24 08:07:35.379] Verified OK [2025-09-24 08:07:35.410] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:07:37.100] Verified OK [2025-09-24 08:07:37.100] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:07:37.691] Verified OK [2025-09-24 08:07:37.691] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:07:40.345] fs.protected_hardlinks = 1 [2025-09-24 08:07:40.345] fs.protected_symlinks = 1 [2025-09-24 08:07:40.361] kernel.modules_disabled = 1 [2025-09-24 08:07:40.569] [2025-09-24 08:07:40.569] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:07:41.793] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:07:49.395] SBL1:1210.0.1.0 [2025-09-24 08:07:49.443] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:07:51.010] SBL2:1210.0.1.0 [2025-09-24 08:07:51.057] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:07:51.170] j-A [2025-09-24 08:07:58.540] The R5 Autosar Classic is running [2025-09-24 08:07:58.540] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:07:58.540] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:07:59.148] INIT: version 2.96 booting [2025-09-24 08:07:59.259] INIT: Entering runlevel: 5 [2025-09-24 08:07:59.420] mtd24 attached [2025-09-24 08:07:59.420] mtd28 attached [2025-09-24 08:07:59.451] mtd32 attached [2025-09-24 08:07:59.467] ubi0:textures is mounted. [2025-09-24 08:07:59.483] ubi1:animations is mounted. [2025-09-24 08:07:59.545] RTNETLINK answers: File exists [2025-09-24 08:07:59.545] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:07:59.545] ubi2:dml_code is mounted. [2025-09-24 08:07:59.545] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:07:59.545] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:07:59.545] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:07:59.545] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:07:59.546] data.LB_FadeInType0=100 [2025-09-24 08:07:59.546] data.CHLH_FadeInType0=0 [2025-09-24 08:07:59.546] data.WU_FadeInDelay=0 [2025-09-24 08:07:59.546] max_time_out=0 [2025-09-24 08:07:59.546] No splash screen [2025-09-24 08:07:59.546] stop dss Done [2025-09-24 08:07:59.609] /dev/mem opened. [2025-09-24 08:07:59.609] Memory mapped at address 0xffff97e33000. [2025-09-24 08:07:59.662] Read at address 0x00600018 (0xffff97e33018): 0x00000000 [2025-09-24 08:07:59.662] Write at address 0x00600018 (0xffff97e33018): 0x00400040, readback 0x00400040 [2025-09-24 08:07:59.662] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:07:59.662] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:07:59.790] Loaded PowerVR consumer services. [2025-09-24 08:07:59.918] Waiting data available... [2025-09-24 08:07:59.934] 512+0 records in [2025-09-24 08:07:59.934] 512+0 records out [2025-09-24 08:07:59.982] Starting syslogd/klogd: done [2025-09-24 08:07:59.998] DML Start [2025-09-24 08:08:00.158] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:08:00.413] DML res1: 0 [2025-09-24 08:08:00.830] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:08:00.851] Read Success [2025-09-24 08:08:00.851] Verifying certificate... [2025-09-24 08:08:01.074] Verified OK [2025-09-24 08:08:01.090] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:08:02.796] Verified OK [2025-09-24 08:08:02.796] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:08:03.435] Verified OK [2025-09-24 08:08:03.435] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:08:06.089] fs.protected_hardlinks = 1 [2025-09-24 08:08:06.105] fs.protected_symlinks = 1 [2025-09-24 08:08:06.121] kernel.modules_disabled = 1 [2025-09-24 08:08:06.296] [2025-09-24 08:08:06.296] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:08:07.485] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:08:15.101] SBL1:1210.0.1.0 [2025-09-24 08:08:15.149] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:08:16.715] SBL2:1210.0.1.0 [2025-09-24 08:08:16.764] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:08:16.860] j-A [2025-09-24 08:08:24.213] The R5 Autosar Classic is running [2025-09-24 08:08:24.238] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:08:24.238] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:08:24.845] INIT: version 2.96 booting [2025-09-24 08:08:24.958] INIT: Entering runlevel: 5 [2025-09-24 08:08:25.117] mtd32 attached [2025-09-24 08:08:25.117] mtd24 attached [2025-09-24 08:08:25.133] mtd28 attached [2025-09-24 08:08:25.181] RTNETLINK answers: File exists [2025-09-24 08:08:25.245] ubi0:dml_code is mounted. [2025-09-24 08:08:25.245] ubi2:animations is mounted. [2025-09-24 08:08:25.245] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:08:25.245] ubi1:textures is mounted. [2025-09-24 08:08:25.245] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:08:25.245] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:08:25.245] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:08:25.245] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:08:25.245] data.LB_FadeInType0=100 [2025-09-24 08:08:25.245] data.CHLH_FadeInType0=0 [2025-09-24 08:08:25.245] data.WU_FadeInDelay=0 [2025-09-24 08:08:25.245] max_time_out=0 [2025-09-24 08:08:25.245] No splash screen [2025-09-24 08:08:25.245] stop dss Done [2025-09-24 08:08:25.329] /dev/mem opened. [2025-09-24 08:08:25.329] Memory mapped at address 0xffffbb9fe000. [2025-09-24 08:08:25.329] Read at address 0x00600018 (0xffffbb9fe018): 0x00000000 [2025-09-24 08:08:25.329] Write at address 0x00600018 (0xffffbb9fe018): 0x00400040, readback 0x00400040 [2025-09-24 08:08:25.329] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:08:25.345] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:08:25.504] Loaded PowerVR consumer services. [2025-09-24 08:08:25.601] Waiting data available... [2025-09-24 08:08:25.617] 512+0 records in [2025-09-24 08:08:25.617] 512+0 records out [2025-09-24 08:08:25.664] Starting syslogd/klogd: done [2025-09-24 08:08:25.680] DML Start [2025-09-24 08:08:25.824] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:08:26.032] DML res1: 0 [2025-09-24 08:08:26.550] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:08:26.550] Read Success [2025-09-24 08:08:26.550] Verifying certificate... [2025-09-24 08:08:26.790] Verified OK [2025-09-24 08:08:26.806] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:08:28.579] Verified OK [2025-09-24 08:08:28.579] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:08:29.123] Verified OK [2025-09-24 08:08:29.123] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:08:31.536] fs.protected_hardlinks = 1 [2025-09-24 08:08:31.552] fs.protected_symlinks = 1 [2025-09-24 08:08:31.552] kernel.modules_disabled = 1 [2025-09-24 08:08:31.760] [2025-09-24 08:08:31.760] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:08:33.101] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:08:40.844] SBL1:1210.0.1.0 [2025-09-24 08:08:40.876] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:08:42.458] SBL2:1210.0.1.0 [2025-09-24 08:08:42.490] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:08:42.602] j-A [2025-09-24 08:08:49.974] The R5 Autosar Classic is running [2025-09-24 08:08:49.974] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:08:49.974] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:08:50.582] INIT: version 2.96 booting [2025-09-24 08:08:50.693] INIT: Entering runlevel: 5 [2025-09-24 08:08:50.853] mtd28 attached [2025-09-24 08:08:50.853] mtd24 attached [2025-09-24 08:08:50.869] mtd32 attached [2025-09-24 08:08:50.917] RTNETLINK answers: File exists [2025-09-24 08:08:50.917] ubi1:textures is mounted. [2025-09-24 08:08:50.973] ubi2:dml_code is mounted. [2025-09-24 08:08:50.973] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:08:50.973] ubi0:animations is mounted. [2025-09-24 08:08:50.973] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:08:50.973] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:08:50.973] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:08:50.973] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:08:50.973] data.LB_FadeInType0=100 [2025-09-24 08:08:50.973] data.CHLH_FadeInType0=0 [2025-09-24 08:08:50.973] data.WU_FadeInDelay=0 [2025-09-24 08:08:50.973] max_time_out=0 [2025-09-24 08:08:50.973] No splash screen [2025-09-24 08:08:50.973] stop dss Done [2025-09-24 08:08:51.021] /dev/mem opened. [2025-09-24 08:08:51.021] Memory mapped at address 0xffffbda57000. [2025-09-24 08:08:51.047] Read at address 0x00600018 (0xffffbda57018): 0x00000000 [2025-09-24 08:08:51.047] Write at address 0x00600018 (0xffffbda57018): 0x00400040, readback 0x00400040 [2025-09-24 08:08:51.047] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:08:51.063] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:08:51.239] Loaded PowerVR consumer services. [2025-09-24 08:08:51.351] Waiting data available... [2025-09-24 08:08:51.367] 512+0 records in [2025-09-24 08:08:51.367] 512+0 records out [2025-09-24 08:08:51.399] Starting syslogd/klogd: done [2025-09-24 08:08:51.415] DML Start [2025-09-24 08:08:51.591] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:08:51.846] DML res1: 0 [2025-09-24 08:08:52.255] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:08:52.255] Read Success [2025-09-24 08:08:52.255] Verifying certificate... [2025-09-24 08:08:52.479] Verified OK [2025-09-24 08:08:52.495] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:08:54.230] Verified OK [2025-09-24 08:08:54.230] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:08:54.834] Verified OK [2025-09-24 08:08:54.834] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:08:57.376] fs.protected_hardlinks = 1 [2025-09-24 08:08:57.392] fs.protected_symlinks = 1 [2025-09-24 08:08:57.392] kernel.modules_disabled = 1 [2025-09-24 08:08:57.600] [2025-09-24 08:08:57.600] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:08:58.923] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:09:06.537] SBL1:1210.0.1.0 [2025-09-24 08:09:06.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:09:08.152] SBL2:1210.0.1.0 [2025-09-24 08:09:08.200] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:09:08.296] j-A [2025-09-24 08:09:15.650] The R5 Autosar Classic is running [2025-09-24 08:09:15.673] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:09:15.673] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:09:16.280] INIT: version 2.96 booting [2025-09-24 08:09:16.393] INIT: Entering runlevel: 5 [2025-09-24 08:09:16.536] mtd24 attached [2025-09-24 08:09:16.552] mtd32 attached [2025-09-24 08:09:16.568] mtd28 attached [2025-09-24 08:09:16.616] ubi0:textures is mounted. [2025-09-24 08:09:16.616] RTNETLINK answers: File exists [2025-09-24 08:09:16.616] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:09:16.675] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:09:16.675] ubi1:dml_code is mounted. [2025-09-24 08:09:16.675] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:09:16.675] ubi2:animations is mounted. [2025-09-24 08:09:16.675] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:09:16.676] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:09:16.676] data.LB_FadeInType0=100 [2025-09-24 08:09:16.676] data.CHLH_FadeInType0=0 [2025-09-24 08:09:16.676] data.WU_FadeInDelay=0 [2025-09-24 08:09:16.676] max_time_out=0 [2025-09-24 08:09:16.676] No splash screen [2025-09-24 08:09:16.676] stop dss Done [2025-09-24 08:09:16.746] /dev/mem opened. [2025-09-24 08:09:16.746] Memory mapped at address 0xffff9c694000. [2025-09-24 08:09:16.746] Read at address 0x00600018 (0xffff9c694018): 0x00000000 [2025-09-24 08:09:16.746] Write at address 0x00600018 (0xffff9c694018): 0x00400040, readback 0x00400040 [2025-09-24 08:09:16.762] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:09:16.778] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:09:17.002] Loaded PowerVR consumer services. [2025-09-24 08:09:17.018] Waiting data available... [2025-09-24 08:09:17.050] 512+0 records in [2025-09-24 08:09:17.050] 512+0 records out [2025-09-24 08:09:17.082] Starting syslogd/klogd: done [2025-09-24 08:09:17.098] DML Start [2025-09-24 08:09:17.274] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:09:17.482] DML res1: 0 [2025-09-24 08:09:17.960] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:09:17.960] Read Success [2025-09-24 08:09:17.960] Verifying certificate... [2025-09-24 08:09:18.215] Verified OK [2025-09-24 08:09:18.231] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:09:19.838] Verified OK [2025-09-24 08:09:19.838] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:09:20.509] Verified OK [2025-09-24 08:09:20.509] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:09:23.097] fs.protected_hardlinks = 1 [2025-09-24 08:09:23.097] fs.protected_symlinks = 1 [2025-09-24 08:09:23.097] kernel.modules_disabled = 1 [2025-09-24 08:09:23.273] [2025-09-24 08:09:23.273] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:09:24.519] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:09:32.262] SBL1:1210.0.1.0 [2025-09-24 08:09:32.310] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:09:33.876] SBL2:1210.0.1.0 [2025-09-24 08:09:33.924] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:09:34.035] j-A [2025-09-24 08:09:41.406] The R5 Autosar Classic is running [2025-09-24 08:09:41.406] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:09:41.406] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:09:42.014] INIT: version 2.96 booting [2025-09-24 08:09:42.125] INIT: Entering runlevel: 5 [2025-09-24 08:09:42.269] mtd24 attached [2025-09-24 08:09:42.285] mtd28 attached [2025-09-24 08:09:42.301] mtd32 attached [2025-09-24 08:09:42.333] ubi0:textures is mounted. [2025-09-24 08:09:42.349] ubi1:animations is mounted. [2025-09-24 08:09:42.349] RTNETLINK answers: File exists [2025-09-24 08:09:42.407] ubi2:dml_code is mounted. [2025-09-24 08:09:42.407] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:09:42.407] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:09:42.407] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:09:42.407] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:09:42.407] data.LB_FadeInType0=100 [2025-09-24 08:09:42.407] data.CHLH_FadeInType0=0 [2025-09-24 08:09:42.407] data.WU_FadeInDelay=0 [2025-09-24 08:09:42.407] max_time_out=0 [2025-09-24 08:09:42.407] No splash screen [2025-09-24 08:09:42.407] stop dss Done [2025-09-24 08:09:42.407] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:09:42.485] /dev/mem opened. [2025-09-24 08:09:42.485] Memory mapped at address 0xffffbd0c4000. [2025-09-24 08:09:42.485] Read at address 0x00600018 (0xffffbd0c4018): 0x00000000 [2025-09-24 08:09:42.485] Write at address 0x00600018 (0xffffbd0c4018): 0x00400040, readback 0x00400040 [2025-09-24 08:09:42.485] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:09:42.485] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:09:42.597] Loaded PowerVR consumer services. [2025-09-24 08:09:42.741] Waiting data available... [2025-09-24 08:09:42.757] 512+0 records in [2025-09-24 08:09:42.757] 512+0 records out [2025-09-24 08:09:42.804] Starting syslogd/klogd: done [2025-09-24 08:09:42.820] DML Start [2025-09-24 08:09:43.013] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:09:43.221] DML res1: 0 [2025-09-24 08:09:43.636] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:09:43.652] Read Success [2025-09-24 08:09:43.652] Verifying certificate... [2025-09-24 08:09:43.940] Verified OK [2025-09-24 08:09:43.956] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:09:45.632] Verified OK [2025-09-24 08:09:45.632] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:09:46.230] Verified OK [2025-09-24 08:09:46.230] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:09:48.884] fs.protected_hardlinks = 1 [2025-09-24 08:09:48.913] fs.protected_symlinks = 1 [2025-09-24 08:09:48.913] kernel.modules_disabled = 1 [2025-09-24 08:09:49.089] [2025-09-24 08:09:49.089] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:09:50.240] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:09:57.978] SBL1:1210.0.1.0 [2025-09-24 08:09:58.010] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:09:59.593] SBL2:1210.0.1.0 [2025-09-24 08:09:59.626] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:09:59.738] j-A [2025-09-24 08:10:07.114] The R5 Autosar Classic is running [2025-09-24 08:10:07.114] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:10:07.114] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:10:07.721] INIT: version 2.96 booting [2025-09-24 08:10:07.833] INIT: Entering runlevel: 5 [2025-09-24 08:10:07.977] mtd28 attached [2025-09-24 08:10:07.993] mtd24 attached [2025-09-24 08:10:08.009] mtd32 attached [2025-09-24 08:10:08.056] RTNETLINK answers: File exists [2025-09-24 08:10:08.056] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:10:08.098] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:10:08.098] ubi0:animations is mounted. [2025-09-24 08:10:08.098] ubi1:textures is mounted. [2025-09-24 08:10:08.098] ubi2:dml_code is mounted. [2025-09-24 08:10:08.098] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:10:08.098] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:10:08.098] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:10:08.098] data.LB_FadeInType0=100 [2025-09-24 08:10:08.119] data.CHLH_FadeInType0=0 [2025-09-24 08:10:08.119] data.WU_FadeInDelay=0 [2025-09-24 08:10:08.119] max_time_out=0 [2025-09-24 08:10:08.119] No splash screen [2025-09-24 08:10:08.119] stop dss Done [2025-09-24 08:10:08.151] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:10:08.187] /dev/mem opened. [2025-09-24 08:10:08.187] Memory mapped at address 0xffff89f95000. [2025-09-24 08:10:08.187] Read at address 0x00600018 (0xffff89f95018): 0x00000000 [2025-09-24 08:10:08.187] Write at address 0x00600018 (0xffff89f95018): 0x00400040, readback 0x00400040 [2025-09-24 08:10:08.187] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:10:08.284] Loaded PowerVR consumer services. [2025-09-24 08:10:08.444] Waiting data available... [2025-09-24 08:10:08.476] 512+0 records in [2025-09-24 08:10:08.476] 512+0 records out [2025-09-24 08:10:08.523] Starting syslogd/klogd: done [2025-09-24 08:10:08.539] DML Start [2025-09-24 08:10:08.747] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:10:08.939] DML res1: 0 [2025-09-24 08:10:09.384] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:10:09.384] Read Success [2025-09-24 08:10:09.384] Verifying certificate... [2025-09-24 08:10:09.639] Verified OK [2025-09-24 08:10:09.639] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:10:11.316] Verified OK [2025-09-24 08:10:11.316] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:10:11.968] Verified OK [2025-09-24 08:10:11.968] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:10:14.574] fs.protected_hardlinks = 1 [2025-09-24 08:10:14.590] fs.protected_symlinks = 1 [2025-09-24 08:10:14.590] kernel.modules_disabled = 1 [2025-09-24 08:10:14.798] [2025-09-24 08:10:14.798] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:10:15.944] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:10:23.686] SBL1:1210.0.1.0 [2025-09-24 08:10:23.718] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:10:25.301] SBL2:1210.0.1.0 [2025-09-24 08:10:25.349] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:10:25.444] j-A [2025-09-24 08:10:32.800] The R5 Autosar Classic is running [2025-09-24 08:10:32.800] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:10:32.821] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:10:33.428] INIT: version 2.96 booting [2025-09-24 08:10:33.539] INIT: Entering runlevel: 5 [2025-09-24 08:10:33.700] mtd32 attached [2025-09-24 08:10:33.700] mtd24 attached [2025-09-24 08:10:33.716] mtd28 attached [2025-09-24 08:10:33.763] RTNETLINK answers: File exists [2025-09-24 08:10:33.763] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:10:33.822] ubi2:animations is mounted. [2025-09-24 08:10:33.822] ubi0:dml_code is mounted. [2025-09-24 08:10:33.822] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:10:33.822] ubi1:textures is mounted. [2025-09-24 08:10:33.822] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:10:33.822] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:10:33.822] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:10:33.822] data.LB_FadeInType0=100 [2025-09-24 08:10:33.822] data.CHLH_FadeInType0=0 [2025-09-24 08:10:33.822] data.WU_FadeInDelay=0 [2025-09-24 08:10:33.822] max_time_out=0 [2025-09-24 08:10:33.822] No splash screen [2025-09-24 08:10:33.822] stop dss Done [2025-09-24 08:10:33.862] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:10:33.862] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:10:33.862] /dev/mem opened. [2025-09-24 08:10:33.862] Memory mapped at address 0xffff9ce9a000. [2025-09-24 08:10:33.888] Read at address 0x00600018 (0xffff9ce9a018): 0x00000000 [2025-09-24 08:10:33.888] Write at address 0x00600018 (0xffff9ce9a018): 0x00400040, readback 0x00400040 [2025-09-24 08:10:34.128] Loaded PowerVR consumer services. [2025-09-24 08:10:34.144] Waiting data available... [2025-09-24 08:10:34.193] 512+0 records in [2025-09-24 08:10:34.193] 512+0 records out [2025-09-24 08:10:34.240] Starting syslogd/klogd: done [2025-09-24 08:10:34.240] DML Start [2025-09-24 08:10:34.416] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:10:34.672] DML res1: 0 [2025-09-24 08:10:35.101] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:10:35.101] Read Success [2025-09-24 08:10:35.101] Verifying certificate... [2025-09-24 08:10:35.357] Verified OK [2025-09-24 08:10:35.389] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:10:36.940] Verified OK [2025-09-24 08:10:36.940] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:10:37.671] Verified OK [2025-09-24 08:10:37.671] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:10:40.357] fs.protected_hardlinks = 1 [2025-09-24 08:10:40.373] fs.protected_symlinks = 1 [2025-09-24 08:10:40.373] kernel.modules_disabled = 1 [2025-09-24 08:10:40.581] [2025-09-24 08:10:40.581] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:10:41.697] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:10:49.394] SBL1:1210.0.1.0 [2025-09-24 08:10:49.442] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:10:51.009] SBL2:1210.0.1.0 [2025-09-24 08:10:51.057] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:10:51.153] j-A [2025-09-24 08:10:58.507] The R5 Autosar Classic is running [2025-09-24 08:10:58.530] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:10:58.530] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:10:59.138] INIT: version 2.96 booting [2025-09-24 08:10:59.249] INIT: Entering runlevel: 5 [2025-09-24 08:10:59.410] mtd28 attached [2025-09-24 08:10:59.410] mtd24 attached [2025-09-24 08:10:59.426] mtd32 attached [2025-09-24 08:10:59.474] ubi0:animations is mounted. [2025-09-24 08:10:59.490] RTNETLINK answers: File exists [2025-09-24 08:10:59.540] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:10:59.540] ubi2:dml_code is mounted. [2025-09-24 08:10:59.540] ubi1:textures is mounted. [2025-09-24 08:10:59.540] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:10:59.540] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:10:59.540] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:10:59.540] data.LB_FadeInType0=100 [2025-09-24 08:10:59.540] data.CHLH_FadeInType0=0 [2025-09-24 08:10:59.540] data.WU_FadeInDelay=0 [2025-09-24 08:10:59.540] max_time_out=0 [2025-09-24 08:10:59.540] No splash screen [2025-09-24 08:10:59.540] stop dss Done [2025-09-24 08:10:59.540] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:10:59.587] /dev/mem opened. [2025-09-24 08:10:59.587] Memory mapped at address 0xffff8f6d5000. [2025-09-24 08:10:59.613] Read at address 0x00600018 (0xffff8f6d5018): 0x00000000 [2025-09-24 08:10:59.613] Write at address 0x00600018 (0xffff8f6d5018): 0x00400040, readback 0x00400040 [2025-09-24 08:10:59.613] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:10:59.629] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:10:59.901] Waiting data available... [2025-09-24 08:10:59.901] Loaded PowerVR consumer services. [2025-09-24 08:10:59.917] 512+0 records in [2025-09-24 08:10:59.917] 512+0 records out [2025-09-24 08:10:59.964] Starting syslogd/klogd: done [2025-09-24 08:10:59.980] DML Start [2025-09-24 08:11:00.173] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:11:00.396] DML res1: 0 [2025-09-24 08:11:00.857] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:11:00.857] Read Success [2025-09-24 08:11:00.857] Verifying certificate... [2025-09-24 08:11:01.112] Verified OK [2025-09-24 08:11:01.128] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:11:02.785] Verified OK [2025-09-24 08:11:02.785] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:11:03.281] Verified OK [2025-09-24 08:11:03.281] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:11:05.726] fs.protected_hardlinks = 1 [2025-09-24 08:11:05.726] fs.protected_symlinks = 1 [2025-09-24 08:11:05.742] kernel.modules_disabled = 1 [2025-09-24 08:11:05.933] [2025-09-24 08:11:05.933] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:11:07.417] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:11:15.093] SBL1:1210.0.1.0 [2025-09-24 08:11:15.141] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:11:16.707] SBL2:1210.0.1.0 [2025-09-24 08:11:16.755] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:11:16.868] j-A [2025-09-24 08:11:24.206] The R5 Autosar Classic is running [2025-09-24 08:11:24.231] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:11:24.231] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:11:24.838] INIT: version 2.96 booting [2025-09-24 08:11:24.950] INIT: Entering runlevel: 5 [2025-09-24 08:11:25.110] mtd32 attached [2025-09-24 08:11:25.110] mtd24 attached [2025-09-24 08:11:25.126] mtd28 attached [2025-09-24 08:11:25.230] RTNETLINK answers: File exists [2025-09-24 08:11:25.230] ubi0:dml_code is mounted. [2025-09-24 08:11:25.230] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:11:25.230] ubi1:textures is mounted. [2025-09-24 08:11:25.230] ubi2:animations is mounted. [2025-09-24 08:11:25.230] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:11:25.230] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:11:25.230] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:11:25.230] data.LB_FadeInType0=100 [2025-09-24 08:11:25.231] data.CHLH_FadeInType0=0 [2025-09-24 08:11:25.231] data.WU_FadeInDelay=0 [2025-09-24 08:11:25.231] max_time_out=0 [2025-09-24 08:11:25.231] No splash screen [2025-09-24 08:11:25.231] stop dss Done [2025-09-24 08:11:25.231] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:11:25.278] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:11:25.278] /dev/mem opened. [2025-09-24 08:11:25.278] Memory mapped at address 0xffff982ff000. [2025-09-24 08:11:25.310] Read at address 0x00600018 (0xffff982ff018): 0x00000000 [2025-09-24 08:11:25.310] Write at address 0x00600018 (0xffff982ff018): 0x00400040, readback 0x00400040 [2025-09-24 08:11:25.310] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:11:25.406] Loaded PowerVR consumer services. [2025-09-24 08:11:25.566] Waiting data available... [2025-09-24 08:11:25.582] 512+0 records in [2025-09-24 08:11:25.582] 512+0 records out [2025-09-24 08:11:25.614] Starting syslogd/klogd: done [2025-09-24 08:11:25.646] DML Start [2025-09-24 08:11:25.806] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:11:26.029] DML res1: 0 [2025-09-24 08:11:26.461] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:11:26.461] Read Success [2025-09-24 08:11:26.477] Verifying certificate... [2025-09-24 08:11:26.701] Verified OK [2025-09-24 08:11:26.733] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:11:28.427] Verified OK [2025-09-24 08:11:28.427] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:11:29.092] Verified OK [2025-09-24 08:11:29.092] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:11:31.730] fs.protected_hardlinks = 1 [2025-09-24 08:11:31.730] fs.protected_symlinks = 1 [2025-09-24 08:11:31.746] kernel.modules_disabled = 1 [2025-09-24 08:11:31.937] [2025-09-24 08:11:31.937] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:11:33.104] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:11:40.814] SBL1:1210.0.1.0 [2025-09-24 08:11:40.862] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:11:42.429] SBL2:1210.0.1.0 [2025-09-24 08:11:42.476] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:11:42.572] j-A [2025-09-24 08:11:49.926] The R5 Autosar Classic is running [2025-09-24 08:11:49.951] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:11:49.951] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:11:50.559] INIT: version 2.96 booting [2025-09-24 08:11:50.670] INIT: Entering runlevel: 5 [2025-09-24 08:11:50.831] mtd32 attached [2025-09-24 08:11:50.831] mtd24 attached [2025-09-24 08:11:50.847] mtd28 attached [2025-09-24 08:11:50.894] RTNETLINK answers: File exists [2025-09-24 08:11:50.958] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:11:50.958] ubi0:dml_code is mounted. [2025-09-24 08:11:50.958] ubi1:textures is mounted. [2025-09-24 08:11:50.958] ubi2:animations is mounted. [2025-09-24 08:11:50.958] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:11:50.958] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:11:50.958] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:11:50.958] data.LB_FadeInType0=100 [2025-09-24 08:11:50.958] data.CHLH_FadeInType0=0 [2025-09-24 08:11:50.958] data.WU_FadeInDelay=0 [2025-09-24 08:11:50.958] max_time_out=0 [2025-09-24 08:11:50.958] No splash screen [2025-09-24 08:11:50.958] stop dss Done [2025-09-24 08:11:50.958] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:11:50.991] /dev/mem opened. [2025-09-24 08:11:50.991] Memory mapped at address 0xffffb6e5b000. [2025-09-24 08:11:51.017] Read at address 0x00600018 (0xffffb6e5b018): 0x00000000 [2025-09-24 08:11:51.017] Write at address 0x00600018 (0xffffb6e5b018): 0x00400040, readback 0x00400040 [2025-09-24 08:11:51.017] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:11:51.047] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:11:51.126] Loaded PowerVR consumer services. [2025-09-24 08:11:51.287] Waiting data available... [2025-09-24 08:11:51.319] 512+0 records in [2025-09-24 08:11:51.319] 512+0 records out [2025-09-24 08:11:51.350] Starting syslogd/klogd: done [2025-09-24 08:11:51.382] DML Start [2025-09-24 08:11:51.559] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:11:51.815] DML res1: 0 [2025-09-24 08:11:52.134] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:11:52.155] Read Success [2025-09-24 08:11:52.155] Verifying certificate... [2025-09-24 08:11:52.410] Verified OK [2025-09-24 08:11:52.426] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:11:54.080] Verified OK [2025-09-24 08:11:54.080] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:11:54.736] Verified OK [2025-09-24 08:11:54.736] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:11:57.390] fs.protected_hardlinks = 1 [2025-09-24 08:11:57.406] fs.protected_symlinks = 1 [2025-09-24 08:11:57.406] kernel.modules_disabled = 1 [2025-09-24 08:11:57.598] [2025-09-24 08:11:57.598] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:11:58.795] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:12:06.522] SBL1:1210.0.1.0 [2025-09-24 08:12:06.570] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:12:08.136] SBL2:1210.0.1.0 [2025-09-24 08:12:08.184] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:12:08.280] j-A [2025-09-24 08:12:15.634] The R5 Autosar Classic is running [2025-09-24 08:12:15.657] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:12:15.657] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:12:16.265] INIT: version 2.96 booting [2025-09-24 08:12:16.377] INIT: Entering runlevel: 5 [2025-09-24 08:12:16.521] mtd28 attached [2025-09-24 08:12:16.537] mtd24 attached [2025-09-24 08:12:16.552] mtd32 attached [2025-09-24 08:12:16.600] ubi0:animations is mounted. [2025-09-24 08:12:16.600] RTNETLINK answers: File exists [2025-09-24 08:12:16.658] ubi1:textures is mounted. [2025-09-24 08:12:16.658] ubi2:dml_code is mounted. [2025-09-24 08:12:16.658] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:12:16.658] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:12:16.658] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:12:16.658] data.LB_FadeInType0=100 [2025-09-24 08:12:16.658] data.CHLH_FadeInType0=0 [2025-09-24 08:12:16.658] data.WU_FadeInDelay=0 [2025-09-24 08:12:16.658] max_time_out=0 [2025-09-24 08:12:16.658] No splash screen [2025-09-24 08:12:16.658] stop dss Done [2025-09-24 08:12:16.658] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:12:16.658] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:12:16.690] /dev/mem opened. [2025-09-24 08:12:16.690] Memory mapped at address 0xffff9c8b1000. [2025-09-24 08:12:16.716] Read at address 0x00600018 (0xffff9c8b1018): 0x00000000 [2025-09-24 08:12:16.716] Write at address 0x00600018 (0xffff9c8b1018): 0x00400040, readback 0x00400040 [2025-09-24 08:12:16.772] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:12:16.772] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:12:16.835] Loaded PowerVR consumer services. [2025-09-24 08:12:16.996] Waiting data available... [2025-09-24 08:12:17.012] 512+0 records in [2025-09-24 08:12:17.012] 512+0 records out [2025-09-24 08:12:17.043] Starting syslogd/klogd: done [2025-09-24 08:12:17.076] DML Start [2025-09-24 08:12:17.235] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:12:17.443] DML res1: 0 [2025-09-24 08:12:17.947] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:12:17.947] Read Success [2025-09-24 08:12:17.947] Verifying certificate... [2025-09-24 08:12:18.170] Verified OK [2025-09-24 08:12:18.186] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:12:19.848] Verified OK [2025-09-24 08:12:19.848] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:12:20.447] Verified OK [2025-09-24 08:12:20.447] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:12:23.100] fs.protected_hardlinks = 1 [2025-09-24 08:12:23.100] fs.protected_symlinks = 1 [2025-09-24 08:12:23.100] kernel.modules_disabled = 1 [2025-09-24 08:12:23.276] [2025-09-24 08:12:23.276] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:12:24.529] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:12:32.228] SBL1:1210.0.1.0 [2025-09-24 08:12:32.276] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:12:33.844] SBL2:1210.0.1.0 [2025-09-24 08:12:33.891] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:12:34.003] j-A [2025-09-24 08:12:41.341] The R5 Autosar Classic is running [2025-09-24 08:12:41.372] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:12:41.372] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:12:41.979] INIT: version 2.96 booting [2025-09-24 08:12:42.092] INIT: Entering runlevel: 5 [2025-09-24 08:12:42.235] mtd24 attached [2025-09-24 08:12:42.251] mtd32 attached [2025-09-24 08:12:42.283] mtd28 attached [2025-09-24 08:12:42.283] ubi0:textures is mounted. [2025-09-24 08:12:42.299] ubi1:dml_code is mounted. [2025-09-24 08:12:42.379] RTNETLINK answers: File exists [2025-09-24 08:12:42.379] ubi2:animations is mounted. [2025-09-24 08:12:42.379] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:12:42.379] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:12:42.379] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:12:42.379] data.LB_FadeInType0=100 [2025-09-24 08:12:42.379] data.CHLH_FadeInType0=0 [2025-09-24 08:12:42.379] data.WU_FadeInDelay=0 [2025-09-24 08:12:42.379] max_time_out=0 [2025-09-24 08:12:42.379] No splash screen [2025-09-24 08:12:42.379] stop dss Done [2025-09-24 08:12:42.379] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:12:42.379] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:12:42.411] /dev/mem opened. [2025-09-24 08:12:42.437] Memory mapped at address 0xffffa12e7000. [2025-09-24 08:12:42.437] Read at address 0x00600018 (0xffffa12e7018): 0x00000000 [2025-09-24 08:12:42.437] Write at address 0x00600018 (0xffffa12e7018): 0x00400040, readback 0x00400040 [2025-09-24 08:12:42.468] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:12:42.468] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:12:42.532] Loaded PowerVR consumer services. [2025-09-24 08:12:42.708] Waiting data available... [2025-09-24 08:12:42.724] 512+0 records in [2025-09-24 08:12:42.724] 512+0 records out [2025-09-24 08:12:42.756] Starting syslogd/klogd: done [2025-09-24 08:12:42.772] DML Start [2025-09-24 08:12:42.932] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:12:43.171] DML res1: 0 [2025-09-24 08:12:43.587] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:12:43.603] Read Success [2025-09-24 08:12:43.603] Verifying certificate... [2025-09-24 08:12:43.875] Verified OK [2025-09-24 08:12:43.891] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:12:45.418] Verified OK [2025-09-24 08:12:45.418] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:12:46.051] Verified OK [2025-09-24 08:12:46.051] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:12:48.738] fs.protected_hardlinks = 1 [2025-09-24 08:12:48.753] fs.protected_symlinks = 1 [2025-09-24 08:12:48.753] kernel.modules_disabled = 1 [2025-09-24 08:12:48.962] [2025-09-24 08:12:48.962] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:12:50.209] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:12:57.934] SBL1:1210.0.1.0 [2025-09-24 08:12:57.982] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:12:59.548] SBL2:1210.0.1.0 [2025-09-24 08:12:59.596] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:12:59.708] j-A [2025-09-24 08:13:07.078] The R5 Autosar Classic is running [2025-09-24 08:13:07.078] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:13:07.078] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:13:07.685] INIT: version 2.96 booting [2025-09-24 08:13:07.797] INIT: Entering runlevel: 5 [2025-09-24 08:13:07.941] mtd32 attached [2025-09-24 08:13:07.957] mtd28 attached [2025-09-24 08:13:07.973] mtd24 attached [2025-09-24 08:13:08.005] ubi0:dml_code is mounted. [2025-09-24 08:13:08.076] RTNETLINK answers: File exists [2025-09-24 08:13:08.076] ubi1:animations is mounted. [2025-09-24 08:13:08.076] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:13:08.076] ubi2:textures is mounted. [2025-09-24 08:13:08.076] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:13:08.076] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:13:08.076] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:13:08.076] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:13:08.076] data.LB_FadeInType0=100 [2025-09-24 08:13:08.076] data.CHLH_FadeInType0=0 [2025-09-24 08:13:08.076] data.WU_FadeInDelay=0 [2025-09-24 08:13:08.076] max_time_out=0 [2025-09-24 08:13:08.076] No splash screen [2025-09-24 08:13:08.076] stop dss Done [2025-09-24 08:13:08.123] /dev/mem opened. [2025-09-24 08:13:08.123] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:13:08.160] Memory mapped at address 0xffff9df8e000. [2025-09-24 08:13:08.160] Read at address 0x00600018 (0xffff9df8e018): 0x00000000 [2025-09-24 08:13:08.160] Write at address 0x00600018 (0xffff9df8e018): 0x00400040, readback 0x00400040 [2025-09-24 08:13:08.160] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:13:08.257] Loaded PowerVR consumer services. [2025-09-24 08:13:08.447] Waiting data available... [2025-09-24 08:13:08.447] 512+0 records in [2025-09-24 08:13:08.447] 512+0 records out [2025-09-24 08:13:08.480] Starting syslogd/klogd: done [2025-09-24 08:13:08.496] DML Start [2025-09-24 08:13:08.655] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:13:08.879] DML res1: 0 [2025-09-24 08:13:09.364] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:13:09.364] Read Success [2025-09-24 08:13:09.364] Verifying certificate... [2025-09-24 08:13:09.620] Verified OK [2025-09-24 08:13:09.635] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:13:11.234] Verified OK [2025-09-24 08:13:11.255] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:13:11.916] Verified OK [2025-09-24 08:13:11.916] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:13:14.555] fs.protected_hardlinks = 1 [2025-09-24 08:13:14.555] fs.protected_symlinks = 1 [2025-09-24 08:13:14.570] kernel.modules_disabled = 1 [2025-09-24 08:13:14.762] [2025-09-24 08:13:14.762] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:13:15.930] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:13:23.654] SBL1:1210.0.1.0 [2025-09-24 08:13:23.686] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:13:25.269] SBL2:1210.0.1.0 [2025-09-24 08:13:25.301] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:13:25.413] j-A [2025-09-24 08:13:32.766] The R5 Autosar Classic is running [2025-09-24 08:13:32.766] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:13:32.787] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:13:33.395] INIT: version 2.96 booting [2025-09-24 08:13:33.506] INIT: Entering runlevel: 5 [2025-09-24 08:13:33.666] mtd28 attached [2025-09-24 08:13:33.682] mtd24 attached [2025-09-24 08:13:33.698] mtd32 attached [2025-09-24 08:13:33.731] ubi0:animations is mounted. [2025-09-24 08:13:33.731] ubi1:textures is mounted. [2025-09-24 08:13:33.747] RTNETLINK answers: File exists [2025-09-24 08:13:33.747] ubi2:dml_code is mounted. [2025-09-24 08:13:33.773] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:13:33.773] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:13:33.807] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:13:33.807] data.LB_FadeInType0=100 [2025-09-24 08:13:33.807] data.CHLH_FadeInType0=0 [2025-09-24 08:13:33.807] data.WU_FadeInDelay=0 [2025-09-24 08:13:33.807] max_time_out=0 [2025-09-24 08:13:33.807] No splash screen [2025-09-24 08:13:33.807] stop dss Done [2025-09-24 08:13:33.807] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:13:33.807] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:13:33.879] /dev/mem opened. [2025-09-24 08:13:33.879] Memory mapped at address 0xffffb54ad000. [2025-09-24 08:13:33.879] Read at address 0x00600018 (0xffffb54ad018): 0x00000000 [2025-09-24 08:13:33.879] Write at address 0x00600018 (0xffffb54ad018): 0x00400040, readback 0x00400040 [2025-09-24 08:13:33.927] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:13:33.943] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:13:34.056] Loaded PowerVR consumer services. [2025-09-24 08:13:34.152] Waiting data available... [2025-09-24 08:13:34.168] 512+0 records in [2025-09-24 08:13:34.168] 512+0 records out [2025-09-24 08:13:34.215] Starting syslogd/klogd: done [2025-09-24 08:13:34.231] DML Start [2025-09-24 08:13:34.407] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:13:34.599] DML res1: 0 [2025-09-24 08:13:35.063] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:13:35.079] Read Success [2025-09-24 08:13:35.079] Verifying certificate... [2025-09-24 08:13:35.334] Verified OK [2025-09-24 08:13:35.350] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:13:37.022] Verified OK [2025-09-24 08:13:37.022] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:13:37.686] Verified OK [2025-09-24 08:13:37.686] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:13:40.324] fs.protected_hardlinks = 1 [2025-09-24 08:13:40.324] fs.protected_symlinks = 1 [2025-09-24 08:13:40.340] kernel.modules_disabled = 1 [2025-09-24 08:13:40.532] [2025-09-24 08:13:40.532] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:13:41.647] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:13:49.365] SBL1:1210.0.1.0 [2025-09-24 08:13:49.397] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:13:50.980] SBL2:1210.0.1.0 [2025-09-24 08:13:51.012] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:13:51.124] j-A [2025-09-24 08:13:58.477] The R5 Autosar Classic is running [2025-09-24 08:13:58.477] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:13:58.499] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:13:59.106] INIT: version 2.96 booting [2025-09-24 08:13:59.217] INIT: Entering runlevel: 5 [2025-09-24 08:13:59.377] mtd32 attached [2025-09-24 08:13:59.377] mtd24 attached [2025-09-24 08:13:59.393] mtd28 attached [2025-09-24 08:13:59.506] ubi1:textures is mounted. [2025-09-24 08:13:59.506] RTNETLINK answers: File exists [2025-09-24 08:13:59.506] ubi0:dml_code is mounted. [2025-09-24 08:13:59.506] ubi2:animations is mounted. [2025-09-24 08:13:59.506] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:13:59.506] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:13:59.506] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:13:59.506] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:13:59.506] data.LB_FadeInType0=100 [2025-09-24 08:13:59.506] data.CHLH_FadeInType0=0 [2025-09-24 08:13:59.506] data.WU_FadeInDelay=0 [2025-09-24 08:13:59.506] max_time_out=0 [2025-09-24 08:13:59.506] No splash screen [2025-09-24 08:13:59.506] stop dss Done [2025-09-24 08:13:59.506] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:13:59.569] /dev/mem opened. [2025-09-24 08:13:59.569] Memory mapped at address 0xffffa79ae000. [2025-09-24 08:13:59.569] Read at address 0x00600018 (0xffffa79ae018): 0x00000000 [2025-09-24 08:13:59.569] Write at address 0x00600018 (0xffffa79ae018): 0x00400040, readback 0x00400040 [2025-09-24 08:13:59.569] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:13:59.585] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:13:59.810] Loaded PowerVR consumer services. [2025-09-24 08:13:59.857] Waiting data available... [2025-09-24 08:13:59.889] 512+0 records in [2025-09-24 08:13:59.889] 512+0 records out [2025-09-24 08:13:59.921] Starting syslogd/klogd: done [2025-09-24 08:13:59.937] DML Start [2025-09-24 08:14:00.112] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:14:00.352] DML res1: 0 [2025-09-24 08:14:00.746] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:14:00.746] Read Success [2025-09-24 08:14:00.746] Verifying certificate... [2025-09-24 08:14:01.049] Verified OK [2025-09-24 08:14:01.082] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:14:02.670] Verified OK [2025-09-24 08:14:02.670] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:14:03.319] Verified OK [2025-09-24 08:14:03.319] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:14:05.877] fs.protected_hardlinks = 1 [2025-09-24 08:14:05.877] fs.protected_symlinks = 1 [2025-09-24 08:14:05.893] kernel.modules_disabled = 1 [2025-09-24 08:14:06.085] [2025-09-24 08:14:06.085] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:14:07.440] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:14:15.059] SBL1:1210.0.1.0 [2025-09-24 08:14:15.107] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:14:16.674] SBL2:1210.0.1.0 [2025-09-24 08:14:16.721] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:14:16.818] j-A [2025-09-24 08:14:24.171] The R5 Autosar Classic is running [2025-09-24 08:14:24.196] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:14:24.196] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:14:24.803] INIT: version 2.96 booting [2025-09-24 08:14:24.915] INIT: Entering runlevel: 5 [2025-09-24 08:14:25.075] mtd32 attached [2025-09-24 08:14:25.091] mtd28 attached [2025-09-24 08:14:25.091] mtd24 attached [2025-09-24 08:14:25.204] RTNETLINK answers: File exists [2025-09-24 08:14:25.204] ubi0:dml_code is mounted. [2025-09-24 08:14:25.204] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:14:25.204] ubi1:animations is mounted. [2025-09-24 08:14:25.204] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:14:25.204] ubi2:textures is mounted. [2025-09-24 08:14:25.204] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:14:25.204] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:14:25.204] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:14:25.204] data.LB_FadeInType0=100 [2025-09-24 08:14:25.204] data.CHLH_FadeInType0=0 [2025-09-24 08:14:25.204] data.WU_FadeInDelay=0 [2025-09-24 08:14:25.204] max_time_out=0 [2025-09-24 08:14:25.204] No splash screen [2025-09-24 08:14:25.204] stop dss Done [2025-09-24 08:14:25.281] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:14:25.281] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:14:25.281] /dev/mem opened. [2025-09-24 08:14:25.281] Memory mapped at address 0xffffa9f16000. [2025-09-24 08:14:25.281] Read at address 0x00600018 (0xffffa9f16018): 0x00000000 [2025-09-24 08:14:25.281] Write at address 0x00600018 (0xffffa9f16018): 0x00400040, readback 0x00400040 [2025-09-24 08:14:25.376] Loaded PowerVR consumer services. [2025-09-24 08:14:25.537] Waiting data available... [2025-09-24 08:14:25.568] 512+0 records in [2025-09-24 08:14:25.568] 512+0 records out [2025-09-24 08:14:25.584] Starting syslogd/klogd: done [2025-09-24 08:14:25.616] DML Start [2025-09-24 08:14:25.776] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:14:26.000] DML res1: 0 [2025-09-24 08:14:26.480] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:14:26.501] Read Success [2025-09-24 08:14:26.501] Verifying certificate... [2025-09-24 08:14:26.740] Verified OK [2025-09-24 08:14:26.756] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:14:28.467] Verified OK [2025-09-24 08:14:28.467] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:14:29.103] Verified OK [2025-09-24 08:14:29.103] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:14:31.581] fs.protected_hardlinks = 1 [2025-09-24 08:14:31.596] fs.protected_symlinks = 1 [2025-09-24 08:14:31.596] kernel.modules_disabled = 1 [2025-09-24 08:14:31.789] [2025-09-24 08:14:31.789] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:14:33.043] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:14:40.789] SBL1:1210.0.1.0 [2025-09-24 08:14:40.820] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:14:42.403] SBL2:1210.0.1.0 [2025-09-24 08:14:42.451] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:14:42.547] j-A [2025-09-24 08:14:49.901] The R5 Autosar Classic is running [2025-09-24 08:14:49.923] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:14:49.923] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:14:50.530] INIT: version 2.96 booting [2025-09-24 08:14:50.642] INIT: Entering runlevel: 5 [2025-09-24 08:14:50.786] mtd28 attached [2025-09-24 08:14:50.802] mtd24 attached [2025-09-24 08:14:50.817] mtd32 attached [2025-09-24 08:14:50.926] RTNETLINK answers: File exists [2025-09-24 08:14:50.926] ubi1:textures is mounted. [2025-09-24 08:14:50.926] ubi0:animations is mounted. [2025-09-24 08:14:50.926] ubi2:dml_code is mounted. [2025-09-24 08:14:50.926] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:14:50.926] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:14:50.926] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:14:50.926] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:14:50.926] data.LB_FadeInType0=100 [2025-09-24 08:14:50.926] data.CHLH_FadeInType0=0 [2025-09-24 08:14:50.926] data.WU_FadeInDelay=0 [2025-09-24 08:14:50.926] max_time_out=0 [2025-09-24 08:14:50.926] No splash screen [2025-09-24 08:14:50.926] stop dss Done [2025-09-24 08:14:50.926] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:14:50.995] /dev/mem opened. [2025-09-24 08:14:50.995] Memory mapped at address 0xffffbf12f000. [2025-09-24 08:14:50.995] Read at address 0x00600018 (0xffffbf12f018): 0x00000000 [2025-09-24 08:14:50.995] Write at address 0x00600018 (0xffffbf12f018): 0x00400040, readback 0x00400040 [2025-09-24 08:14:50.995] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:14:51.011] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:14:51.250] Loaded PowerVR consumer services. [2025-09-24 08:14:51.314] Waiting data available... [2025-09-24 08:14:51.330] 512+0 records in [2025-09-24 08:14:51.330] 512+0 records out [2025-09-24 08:14:51.362] Starting syslogd/klogd: done [2025-09-24 08:14:51.378] DML Start [2025-09-24 08:14:51.522] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:14:51.714] DML res1: 0 [2025-09-24 08:14:52.178] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:14:52.199] Read Success [2025-09-24 08:14:52.199] Verifying certificate... [2025-09-24 08:14:52.406] Verified OK [2025-09-24 08:14:52.422] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:14:53.962] Verified OK [2025-09-24 08:14:53.962] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:14:54.642] Verified OK [2025-09-24 08:14:54.642] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:14:57.408] fs.protected_hardlinks = 1 [2025-09-24 08:14:57.424] fs.protected_symlinks = 1 [2025-09-24 08:14:57.424] kernel.modules_disabled = 1 [2025-09-24 08:14:57.631] [2025-09-24 08:14:57.631] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:14:58.830] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:15:06.500] SBL1:1210.0.1.0 [2025-09-24 08:15:06.548] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:15:08.114] SBL2:1210.0.1.0 [2025-09-24 08:15:08.162] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:15:08.258] j-A [2025-09-24 08:15:15.613] The R5 Autosar Classic is running [2025-09-24 08:15:15.636] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:15:15.636] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:15:16.243] INIT: version 2.96 booting [2025-09-24 08:15:16.355] INIT: Entering runlevel: 5 [2025-09-24 08:15:16.499] mtd24 attached [2025-09-24 08:15:16.515] mtd28 attached [2025-09-24 08:15:16.531] mtd32 attached [2025-09-24 08:15:16.547] ubi0:textures is mounted. [2025-09-24 08:15:16.579] RTNETLINK answers: File exists [2025-09-24 08:15:16.635] ubi1:animations is mounted. [2025-09-24 08:15:16.635] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:15:16.635] ubi2:dml_code is mounted. [2025-09-24 08:15:16.635] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:15:16.635] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:15:16.635] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:15:16.635] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:15:16.635] data.LB_FadeInType0=100 [2025-09-24 08:15:16.635] data.CHLH_FadeInType0=0 [2025-09-24 08:15:16.635] data.WU_FadeInDelay=0 [2025-09-24 08:15:16.635] max_time_out=0 [2025-09-24 08:15:16.635] No splash screen [2025-09-24 08:15:16.635] stop dss Done [2025-09-24 08:15:16.717] /dev/mem opened. [2025-09-24 08:15:16.717] Memory mapped at address 0xffff9795e000. [2025-09-24 08:15:16.717] Read at address 0x00600018 (0xffff9795e018): 0x00000000 [2025-09-24 08:15:16.717] Write at address 0x00600018 (0xffff9795e018): 0x00400040, readback 0x00400040 [2025-09-24 08:15:16.748] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:15:16.764] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:15:16.861] Loaded PowerVR consumer services. [2025-09-24 08:15:17.002] Waiting data available... [2025-09-24 08:15:17.002] 512+0 records in [2025-09-24 08:15:17.002] 512+0 records out [2025-09-24 08:15:17.018] Starting syslogd/klogd: done [2025-09-24 08:15:17.034] DML Start [2025-09-24 08:15:17.194] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:15:17.498] DML res1: 0 [2025-09-24 08:15:17.817] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:15:17.817] Read Success [2025-09-24 08:15:17.817] Verifying certificate... [2025-09-24 08:15:18.041] Verified OK [2025-09-24 08:15:18.057] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:15:19.743] Verified OK [2025-09-24 08:15:19.743] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:15:20.366] Verified OK [2025-09-24 08:15:20.366] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:15:23.100] fs.protected_hardlinks = 1 [2025-09-24 08:15:23.115] fs.protected_symlinks = 1 [2025-09-24 08:15:23.115] kernel.modules_disabled = 1 [2025-09-24 08:15:23.308] [2025-09-24 08:15:23.308] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:15:24.544] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:15:26.805] @SBL1:1210.0.1.0 [2025-09-24 08:15:32.256] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:15:33.838] SBL2:1210.0.1.0 [2025-09-24 08:15:33.886] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:15:33.983] j-A [2025-09-24 08:15:41.337] The R5 Autosar Classic is running [2025-09-24 08:15:41.359] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:15:41.359] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:15:41.966] INIT: version 2.96 booting [2025-09-24 08:15:42.078] INIT: Entering runlevel: 5 [2025-09-24 08:15:42.238] mtd28 attached [2025-09-24 08:15:42.238] mtd24 attached [2025-09-24 08:15:42.254] mtd32 attached [2025-09-24 08:15:42.286] ubi0:animations is mounted. [2025-09-24 08:15:42.302] ubi1:textures is mounted. [2025-09-24 08:15:42.369] RTNETLINK answers: File exists [2025-09-24 08:15:42.369] ubi2:dml_code is mounted. [2025-09-24 08:15:42.369] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:15:42.369] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:15:42.369] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:15:42.369] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:15:42.369] data.LB_FadeInType0=100 [2025-09-24 08:15:42.369] data.CHLH_FadeInType0=0 [2025-09-24 08:15:42.369] data.WU_FadeInDelay=0 [2025-09-24 08:15:42.369] max_time_out=0 [2025-09-24 08:15:42.369] No splash screen [2025-09-24 08:15:42.369] stop dss Done [2025-09-24 08:15:42.369] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:15:42.413] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:15:42.413] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:15:42.413] /dev/mem opened. [2025-09-24 08:15:42.439] Memory mapped at address 0xffff88413000. [2025-09-24 08:15:42.439] Read at address 0x00600018 (0xffff88413018): 0x00000000 [2025-09-24 08:15:42.439] Write at address 0x00600018 (0xffff88413018): 0x00400040, readback 0x00400040 [2025-09-24 08:15:42.582] Loaded PowerVR consumer services. [2025-09-24 08:15:42.710] Waiting data available... [2025-09-24 08:15:42.726] 512+0 records in [2025-09-24 08:15:42.726] 512+0 records out [2025-09-24 08:15:42.774] Starting syslogd/klogd: done [2025-09-24 08:15:42.790] DML Start [2025-09-24 08:15:42.966] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:15:43.174] DML res1: 0 [2025-09-24 08:15:43.631] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:15:43.631] Read Success [2025-09-24 08:15:43.631] Verifying certificate... [2025-09-24 08:15:43.855] Verified OK [2025-09-24 08:15:43.871] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:15:45.503] Verified OK [2025-09-24 08:15:45.503] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:15:46.110] Verified OK [2025-09-24 08:15:46.126] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:15:48.764] fs.protected_hardlinks = 1 [2025-09-24 08:15:48.780] fs.protected_symlinks = 1 [2025-09-24 08:15:48.796] kernel.modules_disabled = 1 [2025-09-24 08:15:48.972] [2025-09-24 08:15:48.972] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:15:50.215] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:15:57.920] SBL1:1210.0.1.0 [2025-09-24 08:15:57.968] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:15:59.536] SBL2:1210.0.1.0 [2025-09-24 08:15:59.584] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:15:59.695] j-A [2025-09-24 08:16:07.035] The R5 Autosar Classic is running [2025-09-24 08:16:07.066] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:16:07.066] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:16:07.674] INIT: version 2.96 booting [2025-09-24 08:16:07.785] INIT: Entering runlevel: 5 [2025-09-24 08:16:07.930] mtd24 attached [2025-09-24 08:16:07.945] mtd28 attached [2025-09-24 08:16:07.961] mtd32 attached [2025-09-24 08:16:07.977] ubi0:textures is mounted. [2025-09-24 08:16:08.009] RTNETLINK answers: File exists [2025-09-24 08:16:08.009] ubi1:animations is mounted. [2025-09-24 08:16:08.059] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:16:08.059] ubi2:dml_code is mounted. [2025-09-24 08:16:08.059] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:16:08.059] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:16:08.059] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:16:08.059] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:16:08.059] data.LB_FadeInType0=100 [2025-09-24 08:16:08.059] data.CHLH_FadeInType0=0 [2025-09-24 08:16:08.059] data.WU_FadeInDelay=0 [2025-09-24 08:16:08.059] max_time_out=0 [2025-09-24 08:16:08.059] No splash screen [2025-09-24 08:16:08.059] stop dss Done [2025-09-24 08:16:08.122] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:16:08.122] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:16:08.122] /dev/mem opened. [2025-09-24 08:16:08.122] Memory mapped at address 0xffff94bfd000. [2025-09-24 08:16:08.122] Read at address 0x00600018 (0xffff94bfd018): 0x00000000 [2025-09-24 08:16:08.122] Write at address 0x00600018 (0xffff94bfd018): 0x00400040, readback 0x00400040 [2025-09-24 08:16:08.394] Waiting data available... [2025-09-24 08:16:08.410] Loaded PowerVR consumer services. [2025-09-24 08:16:08.441] 512+0 records in [2025-09-24 08:16:08.457] 512+0 records out [2025-09-24 08:16:08.474] Starting syslogd/klogd: done [2025-09-24 08:16:08.490] DML Start [2025-09-24 08:16:08.650] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:16:08.874] DML res1: 0 [2025-09-24 08:16:09.305] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:16:09.305] Read Success [2025-09-24 08:16:09.321] Verifying certificate... [2025-09-24 08:16:09.530] Verified OK [2025-09-24 08:16:09.546] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:16:11.266] Verified OK [2025-09-24 08:16:11.266] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:16:11.885] Verified OK [2025-09-24 08:16:11.885] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:16:14.506] fs.protected_hardlinks = 1 [2025-09-24 08:16:14.522] fs.protected_symlinks = 1 [2025-09-24 08:16:14.522] kernel.modules_disabled = 1 [2025-09-24 08:16:14.714] [2025-09-24 08:16:14.714] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:16:15.926] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:16:23.632] SBL1:1210.0.1.0 [2025-09-24 08:16:23.680] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:16:25.246] SBL2:1210.0.1.0 [2025-09-24 08:16:25.294] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:16:25.407] j-A [2025-09-24 08:16:32.746] The R5 Autosar Classic is running [2025-09-24 08:16:32.777] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:16:32.777] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:16:33.385] INIT: version 2.96 booting [2025-09-24 08:16:33.480] INIT: Entering runlevel: 5 [2025-09-24 08:16:33.641] mtd32 attached [2025-09-24 08:16:33.657] mtd24 attached [2025-09-24 08:16:33.673] mtd28 attached [2025-09-24 08:16:33.705] ubi0:dml_code is mounted. [2025-09-24 08:16:33.774] RTNETLINK answers: File exists [2025-09-24 08:16:33.774] ubi1:textures is mounted. [2025-09-24 08:16:33.774] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:16:33.774] ubi2:animations is mounted. [2025-09-24 08:16:33.774] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:16:33.774] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:16:33.774] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:16:33.774] data.LB_FadeInType0=100 [2025-09-24 08:16:33.774] data.CHLH_FadeInType0=0 [2025-09-24 08:16:33.774] data.WU_FadeInDelay=0 [2025-09-24 08:16:33.774] max_time_out=0 [2025-09-24 08:16:33.774] No splash screen [2025-09-24 08:16:33.774] stop dss Done [2025-09-24 08:16:33.774] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:16:33.806] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:16:33.806] /dev/mem opened. [2025-09-24 08:16:33.838] Memory mapped at address 0xffffacb43000. [2025-09-24 08:16:33.838] Read at address 0x00600018 (0xffffacb43018): 0x00000000 [2025-09-24 08:16:33.838] Write at address 0x00600018 (0xffffacb43018): 0x00400040, readback 0x00400040 [2025-09-24 08:16:33.838] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:16:34.142] Loaded PowerVR consumer services. [2025-09-24 08:16:34.174] Waiting data available... [2025-09-24 08:16:34.206] 512+0 records in [2025-09-24 08:16:34.206] 512+0 records out [2025-09-24 08:16:34.238] Starting syslogd/klogd: done [2025-09-24 08:16:34.254] DML Start [2025-09-24 08:16:34.413] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:16:34.654] DML res1: 0 [2025-09-24 08:16:35.117] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:16:35.133] Read Success [2025-09-24 08:16:35.133] Verifying certificate... [2025-09-24 08:16:35.357] Verified OK [2025-09-24 08:16:35.389] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:16:37.050] Verified OK [2025-09-24 08:16:37.050] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:16:37.634] Verified OK [2025-09-24 08:16:37.634] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:16:40.127] fs.protected_hardlinks = 1 [2025-09-24 08:16:40.143] fs.protected_symlinks = 1 [2025-09-24 08:16:40.159] kernel.modules_disabled = 1 [2025-09-24 08:16:40.367] [2025-09-24 08:16:40.367] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:16:41.691] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:16:49.354] SBL1:1210.0.1.0 [2025-09-24 08:16:49.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:16:50.970] SBL2:1210.0.1.0 [2025-09-24 08:16:51.018] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:16:51.129] j-A [2025-09-24 08:16:58.469] The R5 Autosar Classic is running [2025-09-24 08:16:58.494] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:16:58.494] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:16:59.102] INIT: version 2.96 booting [2025-09-24 08:16:59.213] INIT: Entering runlevel: 5 [2025-09-24 08:16:59.357] mtd24 attached [2025-09-24 08:16:59.373] mtd28 attached [2025-09-24 08:16:59.389] mtd32 attached [2025-09-24 08:16:59.405] ubi0:textures is mounted. [2025-09-24 08:16:59.437] RTNETLINK answers: File exists [2025-09-24 08:16:59.496] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:16:59.496] ubi1:animations is mounted. [2025-09-24 08:16:59.496] ubi2:dml_code is mounted. [2025-09-24 08:16:59.496] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:16:59.496] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:16:59.496] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:16:59.496] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:16:59.496] data.LB_FadeInType0=100 [2025-09-24 08:16:59.496] data.CHLH_FadeInType0=0 [2025-09-24 08:16:59.496] data.WU_FadeInDelay=0 [2025-09-24 08:16:59.496] max_time_out=0 [2025-09-24 08:16:59.496] No splash screen [2025-09-24 08:16:59.496] stop dss Done [2025-09-24 08:16:59.528] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:16:59.565] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:16:59.565] /dev/mem opened. [2025-09-24 08:16:59.565] Memory mapped at address 0xffffa30b7000. [2025-09-24 08:16:59.565] Read at address 0x00600018 (0xffffa30b7018): 0x00000000 [2025-09-24 08:16:59.565] Write at address 0x00600018 (0xffffa30b7018): 0x00400040, readback 0x00400040 [2025-09-24 08:16:59.804] Loaded PowerVR consumer services. [2025-09-24 08:16:59.868] Waiting data available... [2025-09-24 08:16:59.900] 512+0 records in [2025-09-24 08:16:59.900] 512+0 records out [2025-09-24 08:16:59.932] Starting syslogd/klogd: done [2025-09-24 08:16:59.948] DML Start [2025-09-24 08:17:00.140] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:17:00.396] DML res1: 0 [2025-09-24 08:17:00.732] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:17:00.753] Read Success [2025-09-24 08:17:00.753] Verifying certificate... [2025-09-24 08:17:00.961] Verified OK [2025-09-24 08:17:00.977] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:17:02.592] Verified OK [2025-09-24 08:17:02.592] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:17:03.198] Verified OK [2025-09-24 08:17:03.220] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:17:05.746] fs.protected_hardlinks = 1 [2025-09-24 08:17:05.746] fs.protected_symlinks = 1 [2025-09-24 08:17:05.762] kernel.modules_disabled = 1 [2025-09-24 08:17:05.953] [2025-09-24 08:17:05.953] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:17:07.437] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:17:15.049] SBL1:1210.0.1.0 [2025-09-24 08:17:15.097] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:17:16.663] SBL2:1210.0.1.0 [2025-09-24 08:17:16.711] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:17:16.823] j-A [2025-09-24 08:17:24.162] The R5 Autosar Classic is running [2025-09-24 08:17:24.193] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:17:24.193] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:17:24.801] INIT: version 2.96 booting [2025-09-24 08:17:24.898] INIT: Entering runlevel: 5 [2025-09-24 08:17:25.057] mtd24 attached [2025-09-24 08:17:25.073] mtd32 attached [2025-09-24 08:17:25.073] mtd28 attached [2025-09-24 08:17:25.105] ubi0:textures is mounted. [2025-09-24 08:17:25.194] RTNETLINK answers: File exists [2025-09-24 08:17:25.194] ubi1:dml_code is mounted. [2025-09-24 08:17:25.194] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:17:25.194] ubi2:animations is mounted. [2025-09-24 08:17:25.194] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:17:25.194] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:17:25.194] data.LB_FadeInType0=100 [2025-09-24 08:17:25.194] data.CHLH_FadeInType0=0 [2025-09-24 08:17:25.194] data.WU_FadeInDelay=0 [2025-09-24 08:17:25.194] max_time_out=0 [2025-09-24 08:17:25.194] No splash screen [2025-09-24 08:17:25.194] stop dss Done [2025-09-24 08:17:25.194] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:17:25.194] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:17:25.248] /dev/mem opened. [2025-09-24 08:17:25.248] Memory mapped at address 0xffffbe742000. [2025-09-24 08:17:25.248] Read at address 0x00600018 (0xffffbe742018): 0x00000000 [2025-09-24 08:17:25.248] Write at address 0x00600018 (0xffffbe742018): 0x00400040, readback 0x00400040 [2025-09-24 08:17:25.328] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:17:25.344] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:17:25.408] Loaded PowerVR consumer services. [2025-09-24 08:17:25.552] Waiting data available... [2025-09-24 08:17:25.568] 512+0 records in [2025-09-24 08:17:25.568] 512+0 records out [2025-09-24 08:17:25.616] Starting syslogd/klogd: done [2025-09-24 08:17:25.632] DML Start [2025-09-24 08:17:25.807] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:17:26.032] DML res1: 0 [2025-09-24 08:17:26.489] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:17:26.489] Read Success [2025-09-24 08:17:26.489] Verifying certificate... [2025-09-24 08:17:26.728] Verified OK [2025-09-24 08:17:26.744] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:17:28.417] Verified OK [2025-09-24 08:17:28.417] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:17:29.017] Verified OK [2025-09-24 08:17:29.017] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:17:31.560] fs.protected_hardlinks = 1 [2025-09-24 08:17:31.560] fs.protected_symlinks = 1 [2025-09-24 08:17:31.575] kernel.modules_disabled = 1 [2025-09-24 08:17:31.767] [2025-09-24 08:17:31.767] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:17:33.071] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:17:40.754] SBL1:1210.0.1.0 [2025-09-24 08:17:40.802] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:17:42.369] SBL2:1210.0.1.0 [2025-09-24 08:17:42.416] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:17:42.513] j-A [2025-09-24 08:17:49.868] The R5 Autosar Classic is running [2025-09-24 08:17:49.893] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:17:49.893] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:17:50.500] INIT: version 2.96 booting [2025-09-24 08:17:50.612] INIT: Entering runlevel: 5 [2025-09-24 08:17:50.772] mtd28 attached [2025-09-24 08:17:50.772] mtd32 attached [2025-09-24 08:17:50.788] mtd24 attached [2025-09-24 08:17:50.870] RTNETLINK answers: File exists [2025-09-24 08:17:50.870] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:17:50.870] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:17:50.870] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:17:50.870] ubi1:dml_code is mounted. [2025-09-24 08:17:50.870] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:17:50.870] ubi2:textures is mounted. [2025-09-24 08:17:50.870] ubi0:animations is mounted. [2025-09-24 08:17:50.870] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:17:50.896] data.LB_FadeInType0=100 [2025-09-24 08:17:50.896] data.CHLH_FadeInType0=0 [2025-09-24 08:17:50.896] data.WU_FadeInDelay=0 [2025-09-24 08:17:50.896] max_time_out=0 [2025-09-24 08:17:50.896] No splash screen [2025-09-24 08:17:50.896] stop dss Done [2025-09-24 08:17:50.944] /dev/mem opened. [2025-09-24 08:17:50.981] Memory mapped at address 0xffffb2953000. [2025-09-24 08:17:50.981] Read at address 0x00600018 (0xffffb2953018): 0x00000000 [2025-09-24 08:17:50.981] Write at address 0x00600018 (0xffffb2953018): 0x00400040, readback 0x00400040 [2025-09-24 08:17:50.981] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:17:50.981] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:17:51.109] Loaded PowerVR consumer services. [2025-09-24 08:17:51.253] Waiting data available... [2025-09-24 08:17:51.269] 512+0 records in [2025-09-24 08:17:51.269] 512+0 records out [2025-09-24 08:17:51.317] Starting syslogd/klogd: done [2025-09-24 08:17:51.333] DML Start [2025-09-24 08:17:51.508] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:17:51.781] DML res1: 0 [2025-09-24 08:17:52.159] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:17:52.159] Read Success [2025-09-24 08:17:52.159] Verifying certificate... [2025-09-24 08:17:52.431] Verified OK [2025-09-24 08:17:52.447] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:17:54.197] Verified OK [2025-09-24 08:17:54.197] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:17:54.778] Verified OK [2025-09-24 08:17:54.778] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:17:57.321] fs.protected_hardlinks = 1 [2025-09-24 08:17:57.350] fs.protected_symlinks = 1 [2025-09-24 08:17:57.350] kernel.modules_disabled = 1 [2025-09-24 08:17:57.541] [2025-09-24 08:17:57.541] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:17:58.836] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:18:06.452] SBL1:1210.0.1.0 [2025-09-24 08:18:06.500] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:18:08.067] SBL2:1210.0.1.0 [2025-09-24 08:18:08.115] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:18:08.210] j-A [2025-09-24 08:18:15.565] The R5 Autosar Classic is running [2025-09-24 08:18:15.589] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:18:15.589] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:18:16.197] INIT: version 2.96 booting [2025-09-24 08:18:16.308] INIT: Entering runlevel: 5 [2025-09-24 08:18:16.453] mtd28 attached [2025-09-24 08:18:16.469] mtd24 attached [2025-09-24 08:18:16.485] mtd32 attached [2025-09-24 08:18:16.566] RTNETLINK answers: File exists [2025-09-24 08:18:16.566] ubi0:animations is mounted. [2025-09-24 08:18:16.566] ubi1:textures is mounted. [2025-09-24 08:18:16.566] ubi2:dml_code is mounted. [2025-09-24 08:18:16.566] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:18:16.566] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:18:16.566] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:18:16.567] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:18:16.600] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:18:16.600] data.LB_FadeInType0=100 [2025-09-24 08:18:16.600] data.CHLH_FadeInType0=0 [2025-09-24 08:18:16.600] data.WU_FadeInDelay=0 [2025-09-24 08:18:16.600] max_time_out=0 [2025-09-24 08:18:16.600] No splash screen [2025-09-24 08:18:16.600] stop dss Done [2025-09-24 08:18:16.665] /dev/mem opened. [2025-09-24 08:18:16.665] Memory mapped at address 0xffffb16fe000. [2025-09-24 08:18:16.665] Read at address 0x00600018 (0xffffb16fe018): 0x00000000 [2025-09-24 08:18:16.665] Write at address 0x00600018 (0xffffb16fe018): 0x00400040, readback 0x00400040 [2025-09-24 08:18:16.681] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:18:16.697] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:18:16.938] Waiting data available... [2025-09-24 08:18:16.954] Loaded PowerVR consumer services. [2025-09-24 08:18:16.985] 512+0 records in [2025-09-24 08:18:16.985] 512+0 records out [2025-09-24 08:18:17.017] Starting syslogd/klogd: done [2025-09-24 08:18:17.033] DML Start [2025-09-24 08:18:17.178] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:18:17.385] DML res1: 0 [2025-09-24 08:18:17.873] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:18:17.873] Read Success [2025-09-24 08:18:17.873] Verifying certificate... [2025-09-24 08:18:18.097] Verified OK [2025-09-24 08:18:18.113] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:18:19.743] Verified OK [2025-09-24 08:18:19.759] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:18:20.423] Verified OK [2025-09-24 08:18:20.423] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:18:23.077] fs.protected_hardlinks = 1 [2025-09-24 08:18:23.077] fs.protected_symlinks = 1 [2025-09-24 08:18:23.093] kernel.modules_disabled = 1 [2025-09-24 08:18:23.285] [2025-09-24 08:18:23.285] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:18:24.448] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:18:32.157] SBL1:1210.0.1.0 [2025-09-24 08:18:32.189] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 08:18:33.771] SBL2:1210.0.1.0 [2025-09-24 08:18:33.819] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:18:33.915] j-A [2025-09-24 08:18:41.291] The R5 Autosar Classic is running [2025-09-24 08:18:41.291] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:18:41.291] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:18:41.898] INIT: version 2.96 booting [2025-09-24 08:18:42.010] INIT: Entering runlevel: 5 [2025-09-24 08:18:42.154] mtd28 attached [2025-09-24 08:18:42.170] mtd24 attached [2025-09-24 08:18:42.186] mtd32 attached [2025-09-24 08:18:42.284] RTNETLINK answers: File exists [2025-09-24 08:18:42.284] ubi0:animations is mounted. [2025-09-24 08:18:42.284] ubi1:textures is mounted. [2025-09-24 08:18:42.284] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:18:42.284] ubi2:dml_code is mounted. [2025-09-24 08:18:42.284] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:18:42.284] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:18:42.284] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:18:42.284] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:18:42.284] data.LB_FadeInType0=100 [2025-09-24 08:18:42.284] data.CHLH_FadeInType0=0 [2025-09-24 08:18:42.284] data.WU_FadeInDelay=0 [2025-09-24 08:18:42.284] max_time_out=0 [2025-09-24 08:18:42.284] No splash screen [2025-09-24 08:18:42.284] stop dss Done [2025-09-24 08:18:42.364] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:18:42.364] /dev/mem opened. [2025-09-24 08:18:42.364] Memory mapped at address 0xffff85067000. [2025-09-24 08:18:42.364] Read at address 0x00600018 (0xffff85067018): 0x00000000 [2025-09-24 08:18:42.364] Write at address 0x00600018 (0xffff85067018): 0x00400040, readback 0x00400040 [2025-09-24 08:18:42.364] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:18:42.619] Loaded PowerVR consumer services. [2025-09-24 08:18:42.619] Waiting data available... [2025-09-24 08:18:42.651] 512+0 records in [2025-09-24 08:18:42.667] 512+0 records out [2025-09-24 08:18:42.683] Starting syslogd/klogd: done [2025-09-24 08:18:42.699] DML Start [2025-09-24 08:18:42.876] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:18:43.051] DML res1: 0 [2025-09-24 08:18:43.561] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:18:43.561] Read Success [2025-09-24 08:18:43.562] Verifying certificate... [2025-09-24 08:18:43.816] Verified OK [2025-09-24 08:18:43.832] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:18:45.421] Verified OK [2025-09-24 08:18:45.421] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:18:46.049] Verified OK [2025-09-24 08:18:46.049] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:18:48.623] fs.protected_hardlinks = 1 [2025-09-24 08:18:48.623] fs.protected_symlinks = 1 [2025-09-24 08:18:48.623] kernel.modules_disabled = 1 [2025-09-24 08:18:48.816] [2025-09-24 08:18:48.816] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:18:50.139] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:18:57.872] SBL1:1210.0.1.0 [2025-09-24 08:18:57.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:18:59.487] SBL2:1210.0.1.0 [2025-09-24 08:18:59.520] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:18:59.631] j-A [2025-09-24 08:19:06.985] The R5 Autosar Classic is running [2025-09-24 08:19:06.985] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:19:07.006] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:19:07.614] INIT: version 2.96 booting [2025-09-24 08:19:07.725] INIT: Entering runlevel: 5 [2025-09-24 08:19:07.886] mtd28 attached [2025-09-24 08:19:07.886] mtd32 attached [2025-09-24 08:19:07.902] mtd24 attached [2025-09-24 08:19:07.934] ubi0:animations is mounted. [2025-09-24 08:19:07.950] ubi1:dml_code is mounted. [2025-09-24 08:19:07.950] RTNETLINK answers: File exists [2025-09-24 08:19:08.012] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:19:08.012] ubi2:textures is mounted. [2025-09-24 08:19:08.012] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:19:08.012] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:19:08.012] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:19:08.012] data.LB_FadeInType0=100 [2025-09-24 08:19:08.012] data.CHLH_FadeInType0=0 [2025-09-24 08:19:08.012] data.WU_FadeInDelay=0 [2025-09-24 08:19:08.012] max_time_out=0 [2025-09-24 08:19:08.012] No splash screen [2025-09-24 08:19:08.012] stop dss Done [2025-09-24 08:19:08.012] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:19:08.027] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:19:08.049] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:19:08.083] /dev/mem opened. [2025-09-24 08:19:08.083] Memory mapped at address 0xffff999c8000. [2025-09-24 08:19:08.083] Read at address 0x00600018 (0xffff999c8018): 0x00000000 [2025-09-24 08:19:08.083] Write at address 0x00600018 (0xffff999c8018): 0x00400040, readback 0x00400040 [2025-09-24 08:19:08.369] Loaded PowerVR consumer services. [2025-09-24 08:19:08.369] Waiting data available... [2025-09-24 08:19:08.401] 512+0 records in [2025-09-24 08:19:08.401] 512+0 records out [2025-09-24 08:19:08.434] Starting syslogd/klogd: done [2025-09-24 08:19:08.450] DML Start [2025-09-24 08:19:08.625] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:19:08.849] DML res1: 0 [2025-09-24 08:19:09.292] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:19:09.292] Read Success [2025-09-24 08:19:09.292] Verifying certificate... [2025-09-24 08:19:09.564] Verified OK [2025-09-24 08:19:09.580] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:19:11.067] Verified OK [2025-09-24 08:19:11.088] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:19:11.719] Verified OK [2025-09-24 08:19:11.719] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:19:14.454] fs.protected_hardlinks = 1 [2025-09-24 08:19:14.454] fs.protected_symlinks = 1 [2025-09-24 08:19:14.470] kernel.modules_disabled = 1 [2025-09-24 08:19:14.661] [2025-09-24 08:19:14.661] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:19:15.893] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:19:23.564] SBL1:1210.0.1.0 [2025-09-24 08:19:23.612] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:19:25.179] SBL2:1210.0.1.0 [2025-09-24 08:19:25.227] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:19:25.323] j-A [2025-09-24 08:19:32.677] The R5 Autosar Classic is running [2025-09-24 08:19:32.702] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:19:32.702] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:19:33.310] INIT: version 2.96 booting [2025-09-24 08:19:33.421] INIT: Entering runlevel: 5 [2025-09-24 08:19:33.581] mtd24 attached [2025-09-24 08:19:33.581] mtd28 attached [2025-09-24 08:19:33.613] mtd32 attached [2025-09-24 08:19:33.629] ubi0:textures is mounted. [2025-09-24 08:19:33.711] RTNETLINK answers: File exists [2025-09-24 08:19:33.711] ubi1:animations is mounted. [2025-09-24 08:19:33.711] ubi2:dml_code is mounted. [2025-09-24 08:19:33.711] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:19:33.711] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:19:33.711] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:19:33.711] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:19:33.711] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:19:33.711] data.LB_FadeInType0=100 [2025-09-24 08:19:33.711] data.CHLH_FadeInType0=0 [2025-09-24 08:19:33.711] data.WU_FadeInDelay=0 [2025-09-24 08:19:33.711] max_time_out=0 [2025-09-24 08:19:33.711] No splash screen [2025-09-24 08:19:33.711] stop dss Done [2025-09-24 08:19:33.759] /dev/mem opened. [2025-09-24 08:19:33.759] Memory mapped at address 0xffff93872000. [2025-09-24 08:19:33.791] Read at address 0x00600018 (0xffff93872018): 0x00000000 [2025-09-24 08:19:33.791] Write at address 0x00600018 (0xffff93872018): 0x00400040, readback 0x00400040 [2025-09-24 08:19:33.791] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:19:33.791] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:19:33.951] Loaded PowerVR consumer services. [2025-09-24 08:19:34.079] Waiting data available... [2025-09-24 08:19:34.095] 512+0 records in [2025-09-24 08:19:34.095] 512+0 records out [2025-09-24 08:19:34.143] Starting syslogd/klogd: done [2025-09-24 08:19:34.159] DML Start [2025-09-24 08:19:34.319] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:19:34.510] DML res1: 0 [2025-09-24 08:19:35.016] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:19:35.016] Read Success [2025-09-24 08:19:35.016] Verifying certificate... [2025-09-24 08:19:35.272] Verified OK [2025-09-24 08:19:35.288] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:19:36.980] Verified OK [2025-09-24 08:19:36.980] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:19:37.569] Verified OK [2025-09-24 08:19:37.569] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:19:40.207] fs.protected_hardlinks = 1 [2025-09-24 08:19:40.223] fs.protected_symlinks = 1 [2025-09-24 08:19:40.223] kernel.modules_disabled = 1 [2025-09-24 08:19:40.415] [2025-09-24 08:19:40.415] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:19:41.577] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:19:49.292] SBL1:1210.0.1.0 [2025-09-24 08:19:49.324] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:19:50.907] SBL2:1210.0.1.0 [2025-09-24 08:19:50.939] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:19:51.051] j-A [2025-09-24 08:19:58.422] The R5 Autosar Classic is running [2025-09-24 08:19:58.422] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:19:58.422] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:19:59.029] INIT: version 2.96 booting [2025-09-24 08:19:59.141] INIT: Entering runlevel: 5 [2025-09-24 08:19:59.285] mtd24 attached [2025-09-24 08:19:59.301] mtd28 attached [2025-09-24 08:19:59.317] mtd32 attached [2025-09-24 08:19:59.365] ubi0:textures is mounted. [2025-09-24 08:19:59.365] RTNETLINK answers: File exists [2025-09-24 08:19:59.425] ubi2:dml_code is mounted. [2025-09-24 08:19:59.425] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:19:59.425] ubi1:animations is mounted. [2025-09-24 08:19:59.425] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:19:59.425] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:19:59.425] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:19:59.425] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:19:59.425] data.LB_FadeInType0=100 [2025-09-24 08:19:59.425] data.CHLH_FadeInType0=0 [2025-09-24 08:19:59.425] data.WU_FadeInDelay=0 [2025-09-24 08:19:59.425] max_time_out=0 [2025-09-24 08:19:59.425] No splash screen [2025-09-24 08:19:59.425] stop dss Done [2025-09-24 08:19:59.513] /dev/mem opened. [2025-09-24 08:19:59.513] Memory mapped at address 0xffff8408a000. [2025-09-24 08:19:59.513] Read at address 0x00600018 (0xffff8408a018): 0x00000000 [2025-09-24 08:19:59.513] Write at address 0x00600018 (0xffff8408a018): 0x00400040, readback 0x00400040 [2025-09-24 08:19:59.513] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:19:59.513] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:19:59.609] Loaded PowerVR consumer services. [2025-09-24 08:19:59.785] Waiting data available... [2025-09-24 08:19:59.801] 512+0 records in [2025-09-24 08:19:59.801] 512+0 records out [2025-09-24 08:19:59.849] Starting syslogd/klogd: done [2025-09-24 08:19:59.865] DML Start [2025-09-24 08:20:00.042] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:20:00.248] DML res1: 0 [2025-09-24 08:20:00.711] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:20:00.711] Read Success [2025-09-24 08:20:00.711] Verifying certificate... [2025-09-24 08:20:00.967] Verified OK [2025-09-24 08:20:00.983] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:20:02.626] Verified OK [2025-09-24 08:20:02.626] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:20:03.266] Verified OK [2025-09-24 08:20:03.266] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:20:05.856] fs.protected_hardlinks = 1 [2025-09-24 08:20:05.856] fs.protected_symlinks = 1 [2025-09-24 08:20:05.872] kernel.modules_disabled = 1 [2025-09-24 08:20:06.064] [2025-09-24 08:20:06.064] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:20:07.318] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:20:14.994] SBL1:1210.0.1.0 [2025-09-24 08:20:15.042] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:20:16.609] SBL2:1210.0.1.0 [2025-09-24 08:20:16.657] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:20:16.770] j-A [2025-09-24 08:20:24.140] The R5 Autosar Classic is running [2025-09-24 08:20:24.140] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:20:24.140] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:20:24.748] INIT: version 2.96 booting [2025-09-24 08:20:24.860] INIT: Entering runlevel: 5 [2025-09-24 08:20:25.019] mtd24 attached [2025-09-24 08:20:25.019] mtd28 attached [2025-09-24 08:20:25.035] mtd32 attached [2025-09-24 08:20:25.067] ubi0:textures is mounted. [2025-09-24 08:20:25.083] RTNETLINK answers: File exists [2025-09-24 08:20:25.083] ubi1:animations is mounted. [2025-09-24 08:20:25.139] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:20:25.139] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:20:25.139] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:20:25.139] ubi2:dml_code is mounted. [2025-09-24 08:20:25.139] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:20:25.139] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:20:25.139] data.LB_FadeInType0=100 [2025-09-24 08:20:25.139] data.CHLH_FadeInType0=0 [2025-09-24 08:20:25.139] data.WU_FadeInDelay=0 [2025-09-24 08:20:25.139] max_time_out=0 [2025-09-24 08:20:25.139] No splash screen [2025-09-24 08:20:25.139] stop dss Done [2025-09-24 08:20:25.186] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:20:25.186] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:20:25.225] /dev/mem opened. [2025-09-24 08:20:25.225] Memory mapped at address 0xffffa2b35000. [2025-09-24 08:20:25.225] Read at address 0x00600018 (0xffffa2b35018): 0x00000000 [2025-09-24 08:20:25.225] Write at address 0x00600018 (0xffffa2b35018): 0x00400040, readback 0x00400040 [2025-09-24 08:20:25.304] Loaded PowerVR consumer services. [2025-09-24 08:20:25.480] Waiting data available... [2025-09-24 08:20:25.512] 512+0 records in [2025-09-24 08:20:25.512] 512+0 records out [2025-09-24 08:20:25.543] Starting syslogd/klogd: done [2025-09-24 08:20:25.560] DML Start [2025-09-24 08:20:25.720] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:20:25.960] DML res1: 0 [2025-09-24 08:20:26.419] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:20:26.419] Read Success [2025-09-24 08:20:26.419] Verifying certificate... [2025-09-24 08:20:26.660] Verified OK [2025-09-24 08:20:26.660] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:20:28.258] Verified OK [2025-09-24 08:20:28.258] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:20:28.897] Verified OK [2025-09-24 08:20:28.913] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:20:31.632] fs.protected_hardlinks = 1 [2025-09-24 08:20:31.648] fs.protected_symlinks = 1 [2025-09-24 08:20:31.648] kernel.modules_disabled = 1 [2025-09-24 08:20:31.855] [2025-09-24 08:20:31.855] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:20:33.012] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:20:40.716] SBL1:1210.0.1.0 [2025-09-24 08:20:40.764] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:20:42.331] SBL2:1210.0.1.0 [2025-09-24 08:20:42.379] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:20:42.474] j-A [2025-09-24 08:20:49.829] The R5 Autosar Classic is running [2025-09-24 08:20:49.853] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:20:49.853] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:20:50.460] INIT: version 2.96 booting [2025-09-24 08:20:50.573] INIT: Entering runlevel: 5 [2025-09-24 08:20:50.716] mtd24 attached [2025-09-24 08:20:50.732] mtd28 attached [2025-09-24 08:20:50.748] mtd32 attached [2025-09-24 08:20:50.831] RTNETLINK answers: File exists [2025-09-24 08:20:50.831] ubi0:textures is mounted. [2025-09-24 08:20:50.831] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:20:50.831] ubi1:animations is mounted. [2025-09-24 08:20:50.831] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:20:50.831] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:20:50.831] ubi2:dml_code is mounted. [2025-09-24 08:20:50.831] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:20:50.831] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:20:50.860] data.LB_FadeInType0=100 [2025-09-24 08:20:50.860] data.CHLH_FadeInType0=0 [2025-09-24 08:20:50.860] data.WU_FadeInDelay=0 [2025-09-24 08:20:50.860] max_time_out=0 [2025-09-24 08:20:50.860] No splash screen [2025-09-24 08:20:50.860] stop dss Done [2025-09-24 08:20:50.876] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:20:50.892] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:20:50.934] /dev/mem opened. [2025-09-24 08:20:50.934] Memory mapped at address 0xffff99e8c000. [2025-09-24 08:20:50.934] Read at address 0x00600018 (0xffff99e8c018): 0x00000000 [2025-09-24 08:20:50.934] Write at address 0x00600018 (0xffff99e8c018): 0x00400040, readback 0x00400040 [2025-09-24 08:20:51.029] Loaded PowerVR consumer services. [2025-09-24 08:20:51.205] Waiting data available... [2025-09-24 08:20:51.221] 512+0 records in [2025-09-24 08:20:51.221] 512+0 records out [2025-09-24 08:20:51.238] Starting syslogd/klogd: done [2025-09-24 08:20:51.254] DML Start [2025-09-24 08:20:51.398] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:20:51.622] DML res1: 0 [2025-09-24 08:20:52.085] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:20:52.106] Read Success [2025-09-24 08:20:52.106] Verifying certificate... [2025-09-24 08:20:52.393] Verified OK [2025-09-24 08:20:52.410] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:20:54.065] Verified OK [2025-09-24 08:20:54.065] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:20:54.650] Verified OK [2025-09-24 08:20:54.650] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:20:57.336] fs.protected_hardlinks = 1 [2025-09-24 08:20:57.336] fs.protected_symlinks = 1 [2025-09-24 08:20:57.351] kernel.modules_disabled = 1 [2025-09-24 08:20:57.544] [2025-09-24 08:20:57.544] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:20:58.705] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:21:06.435] SBL1:1210.0.1.0 [2025-09-24 08:21:06.467] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:21:08.049] SBL2:1210.0.1.0 [2025-09-24 08:21:08.081] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:21:08.194] j-A [2025-09-24 08:21:15.547] The R5 Autosar Classic is running [2025-09-24 08:21:15.547] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:21:15.568] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:21:16.176] INIT: version 2.96 booting [2025-09-24 08:21:16.288] INIT: Entering runlevel: 5 [2025-09-24 08:21:16.448] mtd32 attached [2025-09-24 08:21:16.448] mtd28 attached [2025-09-24 08:21:16.464] mtd24 attached [2025-09-24 08:21:16.512] ubi0:dml_code is mounted. [2025-09-24 08:21:16.512] RTNETLINK answers: File exists [2025-09-24 08:21:16.528] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:21:16.528] ubi2:textures is mounted. [2025-09-24 08:21:16.549] ubi1:animations is mounted. [2025-09-24 08:21:16.549] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:21:16.549] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:21:16.581] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:21:16.581] data.LB_FadeInType0=100 [2025-09-24 08:21:16.581] data.CHLH_FadeInType0=0 [2025-09-24 08:21:16.581] data.WU_FadeInDelay=0 [2025-09-24 08:21:16.581] max_time_out=0 [2025-09-24 08:21:16.581] No splash screen [2025-09-24 08:21:16.581] stop dss Done [2025-09-24 08:21:16.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:21:16.612] /dev/mem opened. [2025-09-24 08:21:16.612] Memory mapped at address 0xffffa1a15000. [2025-09-24 08:21:16.638] Read at address 0x00600018 (0xffffa1a15018): 0x00000000 [2025-09-24 08:21:16.638] Write at address 0x00600018 (0xffffa1a15018): 0x00400040, readback 0x00400040 [2025-09-24 08:21:16.670] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:21:16.686] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:21:16.895] Loaded PowerVR consumer services. [2025-09-24 08:21:16.927] Waiting data available... [2025-09-24 08:21:16.943] 512+0 records in [2025-09-24 08:21:16.943] 512+0 records out [2025-09-24 08:21:16.990] Starting syslogd/klogd: done [2025-09-24 08:21:17.006] DML Start [2025-09-24 08:21:17.215] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:21:17.438] DML res1: 0 [2025-09-24 08:21:17.789] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:21:17.805] Read Success [2025-09-24 08:21:17.805] Verifying certificate... [2025-09-24 08:21:18.029] Verified OK [2025-09-24 08:21:18.045] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:21:19.618] Verified OK [2025-09-24 08:21:19.618] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:21:20.193] Verified OK [2025-09-24 08:21:20.193] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:21:23.007] fs.protected_hardlinks = 1 [2025-09-24 08:21:23.023] fs.protected_symlinks = 1 [2025-09-24 08:21:23.023] kernel.modules_disabled = 1 [2025-09-24 08:21:23.215] [2025-09-24 08:21:23.215] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:21:24.511] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:21:32.155] SBL1:1210.0.1.0 [2025-09-24 08:21:32.187] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:21:33.769] SBL2:1210.0.1.0 [2025-09-24 08:21:33.801] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:21:33.914] j-A [2025-09-24 08:21:41.287] The R5 Autosar Classic is running [2025-09-24 08:21:41.287] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:21:41.287] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:21:41.895] INIT: version 2.96 booting [2025-09-24 08:21:42.006] INIT: Entering runlevel: 5 [2025-09-24 08:21:42.166] mtd24 attached [2025-09-24 08:21:42.166] mtd28 attached [2025-09-24 08:21:42.182] mtd32 attached [2025-09-24 08:21:42.214] ubi0:textures is mounted. [2025-09-24 08:21:42.230] ubi1:animations is mounted. [2025-09-24 08:21:42.299] RTNETLINK answers: File exists [2025-09-24 08:21:42.299] ubi2:dml_code is mounted. [2025-09-24 08:21:42.299] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:21:42.299] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:21:42.299] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:21:42.299] data.LB_FadeInType0=100 [2025-09-24 08:21:42.299] data.CHLH_FadeInType0=0 [2025-09-24 08:21:42.299] data.WU_FadeInDelay=0 [2025-09-24 08:21:42.299] max_time_out=0 [2025-09-24 08:21:42.299] No splash screen [2025-09-24 08:21:42.299] stop dss Done [2025-09-24 08:21:42.299] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:21:42.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:21:42.370] /dev/mem opened. [2025-09-24 08:21:42.370] Memory mapped at address 0xffffa5ea7000. [2025-09-24 08:21:42.370] Read at address 0x00600018 (0xffffa5ea7018): 0x00000000 [2025-09-24 08:21:42.370] Write at address 0x00600018 (0xffffa5ea7018): 0x00400040, readback 0x00400040 [2025-09-24 08:21:42.402] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:21:42.418] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:21:42.482] Loaded PowerVR consumer services. [2025-09-24 08:21:42.642] Waiting data available... [2025-09-24 08:21:42.674] 512+0 records in [2025-09-24 08:21:42.674] 512+0 records out [2025-09-24 08:21:42.706] Starting syslogd/klogd: done [2025-09-24 08:21:42.722] DML Start [2025-09-24 08:21:42.898] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:21:43.122] DML res1: 0 [2025-09-24 08:21:43.579] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:21:43.579] Read Success [2025-09-24 08:21:43.579] Verifying certificate... [2025-09-24 08:21:43.819] Verified OK [2025-09-24 08:21:43.835] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:21:45.556] Verified OK [2025-09-24 08:21:45.556] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:21:46.172] Verified OK [2025-09-24 08:21:46.172] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:21:48.746] fs.protected_hardlinks = 1 [2025-09-24 08:21:48.746] fs.protected_symlinks = 1 [2025-09-24 08:21:48.762] kernel.modules_disabled = 1 [2025-09-24 08:21:48.969] [2025-09-24 08:21:48.969] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:21:50.178] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:21:57.863] SBL1:1210.0.1.0 [2025-09-24 08:21:57.895] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:21:59.478] SBL2:1210.0.1.0 [2025-09-24 08:21:59.510] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:21:59.622] j-A [2025-09-24 08:22:06.977] The R5 Autosar Classic is running [2025-09-24 08:22:06.977] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:22:06.998] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:22:07.606] INIT: version 2.96 booting [2025-09-24 08:22:07.717] INIT: Entering runlevel: 5 [2025-09-24 08:22:07.862] mtd24 attached [2025-09-24 08:22:07.878] mtd32 attached [2025-09-24 08:22:07.893] mtd28 attached [2025-09-24 08:22:07.909] ubi0:textures is mounted. [2025-09-24 08:22:07.925] RTNETLINK answers: File exists [2025-09-24 08:22:07.964] ubi1:dml_code is mounted. [2025-09-24 08:22:07.964] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:22:07.964] ubi2:animations is mounted. [2025-09-24 08:22:07.964] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:22:07.964] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:22:07.964] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:22:07.992] data.LB_FadeInType0=100 [2025-09-24 08:22:07.992] data.CHLH_FadeInType0=0 [2025-09-24 08:22:07.992] data.WU_FadeInDelay=0 [2025-09-24 08:22:07.992] max_time_out=0 [2025-09-24 08:22:07.992] No splash screen [2025-09-24 08:22:07.992] stop dss Done [2025-09-24 08:22:07.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:22:08.078] /dev/mem opened. [2025-09-24 08:22:08.078] Memory mapped at address 0xffff823a9000. [2025-09-24 08:22:08.078] Read at address 0x00600018 (0xffff823a9018): 0x00000000 [2025-09-24 08:22:08.078] Write at address 0x00600018 (0xffff823a9018): 0x00400040, readback 0x00400040 [2025-09-24 08:22:08.078] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:22:08.078] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:22:08.238] Loaded PowerVR consumer services. [2025-09-24 08:22:08.366] Waiting data available... [2025-09-24 08:22:08.382] 512+0 records in [2025-09-24 08:22:08.382] 512+0 records out [2025-09-24 08:22:08.430] Starting syslogd/klogd: done [2025-09-24 08:22:08.446] DML Start [2025-09-24 08:22:08.622] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:22:08.798] DML res1: 0 [2025-09-24 08:22:09.245] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:22:09.266] Read Success [2025-09-24 08:22:09.266] Verifying certificate... [2025-09-24 08:22:09.538] Verified OK [2025-09-24 08:22:09.554] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:22:11.162] Verified OK [2025-09-24 08:22:11.162] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:22:11.785] Verified OK [2025-09-24 08:22:11.785] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:22:14.471] fs.protected_hardlinks = 1 [2025-09-24 08:22:14.471] fs.protected_symlinks = 1 [2025-09-24 08:22:14.471] kernel.modules_disabled = 1 [2025-09-24 08:22:14.678] [2025-09-24 08:22:14.678] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:22:15.872] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:22:23.555] SBL1:1210.0.1.0 [2025-09-24 08:22:23.603] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:22:25.171] SBL2:1210.0.1.0 [2025-09-24 08:22:25.219] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:22:25.330] j-A [2025-09-24 08:22:32.703] The R5 Autosar Classic is running [2025-09-24 08:22:32.703] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:22:32.703] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:22:33.310] INIT: version 2.96 booting [2025-09-24 08:22:33.422] INIT: Entering runlevel: 5 [2025-09-24 08:22:33.566] mtd24 attached [2025-09-24 08:22:33.582] mtd32 attached [2025-09-24 08:22:33.598] mtd28 attached [2025-09-24 08:22:33.630] ubi0:textures is mounted. [2025-09-24 08:22:33.646] RTNETLINK answers: File exists [2025-09-24 08:22:33.703] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:22:33.703] ubi2:animations is mounted. [2025-09-24 08:22:33.703] ubi1:dml_code is mounted. [2025-09-24 08:22:33.703] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:22:33.703] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:22:33.703] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:22:33.703] data.LB_FadeInType0=100 [2025-09-24 08:22:33.703] data.CHLH_FadeInType0=0 [2025-09-24 08:22:33.703] data.WU_FadeInDelay=0 [2025-09-24 08:22:33.703] max_time_out=0 [2025-09-24 08:22:33.703] No splash screen [2025-09-24 08:22:33.703] stop dss Done [2025-09-24 08:22:33.703] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:22:33.777] /dev/mem opened. [2025-09-24 08:22:33.777] Memory mapped at address 0xffffbe7fb000. [2025-09-24 08:22:33.777] Read at address 0x00600018 (0xffffbe7fb018): 0x00000000 [2025-09-24 08:22:33.777] Write at address 0x00600018 (0xffffbe7fb018): 0x00400040, readback 0x00400040 [2025-09-24 08:22:33.777] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:22:33.793] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:22:33.889] Loaded PowerVR consumer services. [2025-09-24 08:22:34.065] Waiting data available... [2025-09-24 08:22:34.080] 512+0 records in [2025-09-24 08:22:34.096] 512+0 records out [2025-09-24 08:22:34.128] Starting syslogd/klogd: done [2025-09-24 08:22:34.144] DML Start [2025-09-24 08:22:34.336] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:22:34.544] DML res1: 0 [2025-09-24 08:22:34.960] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:22:34.976] Read Success [2025-09-24 08:22:34.976] Verifying certificate... [2025-09-24 08:22:35.216] Verified OK [2025-09-24 08:22:35.232] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:22:36.909] Verified OK [2025-09-24 08:22:36.909] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:22:37.563] Verified OK [2025-09-24 08:22:37.563] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:22:40.169] fs.protected_hardlinks = 1 [2025-09-24 08:22:40.197] fs.protected_symlinks = 1 [2025-09-24 08:22:40.197] kernel.modules_disabled = 1 [2025-09-24 08:22:40.373] [2025-09-24 08:22:40.373] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:22:41.562] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:22:49.270] SBL1:1210.0.1.0 [2025-09-24 08:22:49.302] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:22:50.885] SBL2:1210.0.1.0 [2025-09-24 08:22:50.917] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:22:51.028] j-A [2025-09-24 08:22:58.384] The R5 Autosar Classic is running [2025-09-24 08:22:58.384] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:22:58.405] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:22:59.012] INIT: version 2.96 booting [2025-09-24 08:22:59.124] INIT: Entering runlevel: 5 [2025-09-24 08:22:59.284] mtd32 attached [2025-09-24 08:22:59.300] mtd28 attached [2025-09-24 08:22:59.300] mtd24 attached [2025-09-24 08:22:59.348] ubi0:dml_code is mounted. [2025-09-24 08:22:59.348] RTNETLINK answers: File exists [2025-09-24 08:22:59.389] ubi1:animations is mounted. [2025-09-24 08:22:59.389] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:22:59.389] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:22:59.389] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:22:59.389] ubi2:textures is mounted. [2025-09-24 08:22:59.389] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:22:59.389] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:22:59.411] data.LB_FadeInType0=100 [2025-09-24 08:22:59.411] data.CHLH_FadeInType0=0 [2025-09-24 08:22:59.411] data.WU_FadeInDelay=0 [2025-09-24 08:22:59.411] max_time_out=0 [2025-09-24 08:22:59.411] No splash screen [2025-09-24 08:22:59.411] stop dss Done [2025-09-24 08:22:59.443] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:22:59.458] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:22:59.497] /dev/mem opened. [2025-09-24 08:22:59.497] Memory mapped at address 0xffff81d0b000. [2025-09-24 08:22:59.497] Read at address 0x00600018 (0xffff81d0b018): 0x00000000 [2025-09-24 08:22:59.497] Write at address 0x00600018 (0xffff81d0b018): 0x00400040, readback 0x00400040 [2025-09-24 08:22:59.577] Loaded PowerVR consumer services. [2025-09-24 08:22:59.769] Waiting data available... [2025-09-24 08:22:59.785] 512+0 records in [2025-09-24 08:22:59.785] 512+0 records out [2025-09-24 08:22:59.817] Starting syslogd/klogd: done [2025-09-24 08:22:59.833] DML Start [2025-09-24 08:22:59.992] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:23:00.200] DML res1: 0 [2025-09-24 08:23:00.632] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:23:00.648] Read Success [2025-09-24 08:23:00.648] Verifying certificate... [2025-09-24 08:23:00.888] Verified OK [2025-09-24 08:23:00.904] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:23:02.438] Verified OK [2025-09-24 08:23:02.438] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:23:03.031] Verified OK [2025-09-24 08:23:03.031] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:23:05.812] fs.protected_hardlinks = 1 [2025-09-24 08:23:05.812] fs.protected_symlinks = 1 [2025-09-24 08:23:05.828] kernel.modules_disabled = 1 [2025-09-24 08:23:06.020] [2025-09-24 08:23:06.020] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:23:07.264] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:23:14.975] SBL1:1210.0.1.0 [2025-09-24 08:23:15.023] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:23:16.590] SBL2:1210.0.1.0 [2025-09-24 08:23:16.638] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:23:16.750] j-A [2025-09-24 08:23:24.089] The R5 Autosar Classic is running [2025-09-24 08:23:24.114] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:23:24.114] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:23:24.722] INIT: version 2.96 booting [2025-09-24 08:23:24.833] INIT: Entering runlevel: 5 [2025-09-24 08:23:24.978] mtd24 attached [2025-09-24 08:23:24.994] mtd28 attached [2025-09-24 08:23:25.010] mtd32 attached [2025-09-24 08:23:25.042] ubi0:textures is mounted. [2025-09-24 08:23:25.058] RTNETLINK answers: File exists [2025-09-24 08:23:25.121] ubi1:animations is mounted. [2025-09-24 08:23:25.121] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:23:25.121] ubi2:dml_code is mounted. [2025-09-24 08:23:25.121] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:23:25.121] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:23:25.121] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:23:25.121] data.LB_FadeInType0=100 [2025-09-24 08:23:25.121] data.CHLH_FadeInType0=0 [2025-09-24 08:23:25.121] data.WU_FadeInDelay=0 [2025-09-24 08:23:25.121] max_time_out=0 [2025-09-24 08:23:25.121] No splash screen [2025-09-24 08:23:25.121] stop dss Done [2025-09-24 08:23:25.121] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:23:25.201] /dev/mem opened. [2025-09-24 08:23:25.201] Memory mapped at address 0xffffb266e000. [2025-09-24 08:23:25.201] Read at address 0x00600018 (0xffffb266e018): 0x00000000 [2025-09-24 08:23:25.201] Write at address 0x00600018 (0xffffb266e018): 0x00400040, readback 0x00400040 [2025-09-24 08:23:25.229] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:23:25.229] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:23:25.293] Loaded PowerVR consumer services. [2025-09-24 08:23:25.469] Waiting data available... [2025-09-24 08:23:25.485] 512+0 records in [2025-09-24 08:23:25.485] 512+0 records out [2025-09-24 08:23:25.517] Starting syslogd/klogd: done [2025-09-24 08:23:25.533] DML Start [2025-09-24 08:23:25.677] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:23:25.869] DML res1: 0 [2025-09-24 08:23:26.395] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:23:26.395] Read Success [2025-09-24 08:23:26.395] Verifying certificate... [2025-09-24 08:23:26.619] Verified OK [2025-09-24 08:23:26.651] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:23:28.250] Verified OK [2025-09-24 08:23:28.250] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:23:28.882] Verified OK [2025-09-24 08:23:28.882] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:23:31.472] fs.protected_hardlinks = 1 [2025-09-24 08:23:31.488] fs.protected_symlinks = 1 [2025-09-24 08:23:31.488] kernel.modules_disabled = 1 [2025-09-24 08:23:31.679] [2025-09-24 08:23:31.679] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:23:32.974] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:23:40.677] SBL1:1210.0.1.0 [2025-09-24 08:23:40.725] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:23:42.292] SBL2:1210.0.1.0 [2025-09-24 08:23:42.340] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:23:42.436] j-A [2025-09-24 08:23:49.790] The R5 Autosar Classic is running [2025-09-24 08:23:49.814] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:23:49.814] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:23:50.422] INIT: version 2.96 booting [2025-09-24 08:23:50.535] INIT: Entering runlevel: 5 [2025-09-24 08:23:50.678] mtd24 attached [2025-09-24 08:23:50.694] mtd28 attached [2025-09-24 08:23:50.710] mtd32 attached [2025-09-24 08:23:50.742] ubi0:textures is mounted. [2025-09-24 08:23:50.758] RTNETLINK answers: File exists [2025-09-24 08:23:50.790] ubi1:animations is mounted. [2025-09-24 08:23:50.790] ubi2:dml_code is mounted. [2025-09-24 08:23:50.790] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:23:50.790] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:23:50.790] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:23:50.790] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:23:50.822] data.LB_FadeInType0=100 [2025-09-24 08:23:50.822] data.CHLH_FadeInType0=0 [2025-09-24 08:23:50.822] data.WU_FadeInDelay=0 [2025-09-24 08:23:50.822] max_time_out=0 [2025-09-24 08:23:50.822] No splash screen [2025-09-24 08:23:50.822] stop dss Done [2025-09-24 08:23:50.822] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:23:50.881] /dev/mem opened. [2025-09-24 08:23:50.881] Memory mapped at address 0xffff8e6e1000. [2025-09-24 08:23:50.881] Read at address 0x00600018 (0xffff8e6e1018): 0x00000000 [2025-09-24 08:23:50.881] Write at address 0x00600018 (0xffff8e6e1018): 0x00400040, readback 0x00400040 [2025-09-24 08:23:50.929] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:23:50.945] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:23:51.056] Loaded PowerVR consumer services. [2025-09-24 08:23:51.168] Waiting data available... [2025-09-24 08:23:51.184] 512+0 records in [2025-09-24 08:23:51.200] 512+0 records out [2025-09-24 08:23:51.232] Starting syslogd/klogd: done [2025-09-24 08:23:51.248] DML Start [2025-09-24 08:23:51.439] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:23:51.727] DML res1: 0 [2025-09-24 08:23:51.974] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:23:51.974] Read Success [2025-09-24 08:23:51.974] Verifying certificate... [2025-09-24 08:23:52.230] Verified OK [2025-09-24 08:23:52.246] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:23:53.885] Verified OK [2025-09-24 08:23:53.885] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:23:54.480] Verified OK [2025-09-24 08:23:54.480] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:23:57.136] fs.protected_hardlinks = 1 [2025-09-24 08:23:57.151] fs.protected_symlinks = 1 [2025-09-24 08:23:57.151] kernel.modules_disabled = 1 [2025-09-24 08:23:57.359] [2025-09-24 08:23:57.359] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:23:58.761] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:24:06.400] SBL1:1210.0.1.0 [2025-09-24 08:24:06.432] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:24:08.014] SBL2:1210.0.1.0 [2025-09-24 08:24:08.046] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:24:08.159] j-A [2025-09-24 08:24:15.534] The R5 Autosar Classic is running [2025-09-24 08:24:15.534] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:24:15.534] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:24:16.141] INIT: version 2.96 booting [2025-09-24 08:24:16.253] INIT: Entering runlevel: 5 [2025-09-24 08:24:16.413] mtd24 attached [2025-09-24 08:24:16.430] mtd28 attached [2025-09-24 08:24:16.430] mtd32 attached [2025-09-24 08:24:16.477] ubi0:textures is mounted. [2025-09-24 08:24:16.493] RTNETLINK answers: File exists [2025-09-24 08:24:16.493] ubi1:animations is mounted. [2025-09-24 08:24:16.516] ubi2:dml_code is mounted. [2025-09-24 08:24:16.516] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:24:16.516] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:24:16.516] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:24:16.548] data.LB_FadeInType0=100 [2025-09-24 08:24:16.548] data.CHLH_FadeInType0=0 [2025-09-24 08:24:16.548] data.WU_FadeInDelay=0 [2025-09-24 08:24:16.548] max_time_out=0 [2025-09-24 08:24:16.548] No splash screen [2025-09-24 08:24:16.548] stop dss Done [2025-09-24 08:24:16.548] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:24:16.548] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:24:16.616] /dev/mem opened. [2025-09-24 08:24:16.616] Memory mapped at address 0xffffb3e41000. [2025-09-24 08:24:16.616] Read at address 0x00600018 (0xffffb3e41018): 0x00000000 [2025-09-24 08:24:16.616] Write at address 0x00600018 (0xffffb3e41018): 0x00400040, readback 0x00400040 [2025-09-24 08:24:16.647] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:24:16.647] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:24:16.727] Loaded PowerVR consumer services. [2025-09-24 08:24:16.903] Waiting data available... [2025-09-24 08:24:16.919] 512+0 records in [2025-09-24 08:24:16.919] 512+0 records out [2025-09-24 08:24:16.951] Starting syslogd/klogd: done [2025-09-24 08:24:16.967] DML Start [2025-09-24 08:24:17.158] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:24:17.335] DML res1: 0 [2025-09-24 08:24:17.789] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:24:17.789] Read Success [2025-09-24 08:24:17.789] Verifying certificate... [2025-09-24 08:24:18.061] Verified OK [2025-09-24 08:24:18.092] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:24:19.849] Verified OK [2025-09-24 08:24:19.849] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:24:20.328] Verified OK [2025-09-24 08:24:20.328] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:24:23.015] fs.protected_hardlinks = 1 [2025-09-24 08:24:23.015] fs.protected_symlinks = 1 [2025-09-24 08:24:23.030] kernel.modules_disabled = 1 [2025-09-24 08:24:23.222] [2025-09-24 08:24:23.222] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:24:24.371] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:24:32.108] SBL1:1210.0.1.0 [2025-09-24 08:24:32.139] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:24:33.722] SBL2:1210.0.1.0 [2025-09-24 08:24:33.769] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:24:33.866] j-A [2025-09-24 08:24:41.220] The R5 Autosar Classic is running [2025-09-24 08:24:41.243] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:24:41.243] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:24:41.851] INIT: version 2.96 booting [2025-09-24 08:24:41.963] INIT: Entering runlevel: 5 [2025-09-24 08:24:42.123] mtd28 attached [2025-09-24 08:24:42.123] mtd24 attached [2025-09-24 08:24:42.139] mtd32 attached [2025-09-24 08:24:42.187] RTNETLINK answers: File exists [2025-09-24 08:24:42.230] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:24:42.230] ubi0:animations is mounted. [2025-09-24 08:24:42.230] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:24:42.230] ubi2:dml_code is mounted. [2025-09-24 08:24:42.230] ubi1:textures is mounted. [2025-09-24 08:24:42.230] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:24:42.230] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:24:42.230] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:24:42.230] data.LB_FadeInType0=100 [2025-09-24 08:24:42.252] data.CHLH_FadeInType0=0 [2025-09-24 08:24:42.252] data.WU_FadeInDelay=0 [2025-09-24 08:24:42.252] max_time_out=0 [2025-09-24 08:24:42.252] No splash screen [2025-09-24 08:24:42.252] stop dss Done [2025-09-24 08:24:42.321] /dev/mem opened. [2025-09-24 08:24:42.321] Memory mapped at address 0xffff9a33c000. [2025-09-24 08:24:42.321] Read at address 0x00600018 (0xffff9a33c018): 0x00000000 [2025-09-24 08:24:42.321] Write at address 0x00600018 (0xffff9a33c018): 0x00400040, readback 0x00400040 [2025-09-24 08:24:42.321] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:24:42.337] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:24:42.448] Loaded PowerVR consumer services. [2025-09-24 08:24:42.609] Waiting data available... [2025-09-24 08:24:42.625] 512+0 records in [2025-09-24 08:24:42.625] 512+0 records out [2025-09-24 08:24:42.672] Starting syslogd/klogd: done [2025-09-24 08:24:42.688] DML Start [2025-09-24 08:24:42.881] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:24:43.137] DML res1: 0 [2025-09-24 08:24:43.486] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:24:43.486] Read Success [2025-09-24 08:24:43.486] Verifying certificate... [2025-09-24 08:24:43.790] Verified OK [2025-09-24 08:24:43.806] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:24:45.496] Verified OK [2025-09-24 08:24:45.496] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:24:46.120] Verified OK [2025-09-24 08:24:46.120] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:24:48.695] fs.protected_hardlinks = 1 [2025-09-24 08:24:48.695] fs.protected_symlinks = 1 [2025-09-24 08:24:48.711] kernel.modules_disabled = 1 [2025-09-24 08:24:48.903] [2025-09-24 08:24:48.903] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:24:50.187] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:24:57.817] SBL1:1210.0.1.0 [2025-09-24 08:24:57.849] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:24:59.431] SBL2:1210.0.1.0 [2025-09-24 08:24:59.463] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:24:59.576] j-A [2025-09-24 08:25:06.929] The R5 Autosar Classic is running [2025-09-24 08:25:06.929] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:25:06.950] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:25:07.558] INIT: version 2.96 booting [2025-09-24 08:25:07.670] INIT: Entering runlevel: 5 [2025-09-24 08:25:07.829] mtd28 attached [2025-09-24 08:25:07.829] mtd24 attached [2025-09-24 08:25:07.845] mtd32 attached [2025-09-24 08:25:07.893] ubi1:textures is mounted. [2025-09-24 08:25:07.959] RTNETLINK answers: File exists [2025-09-24 08:25:07.959] ubi0:animations is mounted. [2025-09-24 08:25:07.959] ubi2:dml_code is mounted. [2025-09-24 08:25:07.959] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:25:07.959] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:25:07.959] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:25:07.959] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:25:07.959] data.LB_FadeInType0=100 [2025-09-24 08:25:07.959] data.CHLH_FadeInType0=0 [2025-09-24 08:25:07.959] data.WU_FadeInDelay=0 [2025-09-24 08:25:07.959] max_time_out=0 [2025-09-24 08:25:07.959] No splash screen [2025-09-24 08:25:07.959] stop dss Done [2025-09-24 08:25:07.959] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:25:08.030] /dev/mem opened. [2025-09-24 08:25:08.030] Memory mapped at address 0xffff8e74f000. [2025-09-24 08:25:08.030] Read at address 0x00600018 (0xffff8e74f018): 0x00000000 [2025-09-24 08:25:08.030] Write at address 0x00600018 (0xffff8e74f018): 0x00400040, readback 0x00400040 [2025-09-24 08:25:08.030] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:25:08.046] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:25:08.125] Loaded PowerVR consumer services. [2025-09-24 08:25:08.301] Waiting data available... [2025-09-24 08:25:08.333] 512+0 records in [2025-09-24 08:25:08.333] 512+0 records out [2025-09-24 08:25:08.365] Starting syslogd/klogd: done [2025-09-24 08:25:08.382] DML Start [2025-09-24 08:25:08.557] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:25:08.765] DML res1: 0 [2025-09-24 08:25:09.228] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:25:09.244] Read Success [2025-09-24 08:25:09.244] Verifying certificate... [2025-09-24 08:25:09.500] Verified OK [2025-09-24 08:25:09.516] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:25:11.202] Verified OK [2025-09-24 08:25:11.202] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:25:11.790] Verified OK [2025-09-24 08:25:11.790] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:25:14.334] fs.protected_hardlinks = 1 [2025-09-24 08:25:14.334] fs.protected_symlinks = 1 [2025-09-24 08:25:14.349] kernel.modules_disabled = 1 [2025-09-24 08:25:14.541] [2025-09-24 08:25:14.541] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:25:15.809] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:25:23.506] SBL1:1210.0.1.0 [2025-09-24 08:25:23.538] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:25:25.122] SBL2:1210.0.1.0 [2025-09-24 08:25:25.169] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:25:25.265] j-A [2025-09-24 08:25:32.618] The R5 Autosar Classic is running [2025-09-24 08:25:32.641] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:25:32.641] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:25:33.249] INIT: version 2.96 booting [2025-09-24 08:25:33.361] INIT: Entering runlevel: 5 [2025-09-24 08:25:33.521] mtd32 attached [2025-09-24 08:25:33.521] mtd28 attached [2025-09-24 08:25:33.537] mtd24 attached [2025-09-24 08:25:33.625] ubi1:animations is mounted. [2025-09-24 08:25:33.625] RTNETLINK answers: File exists [2025-09-24 08:25:33.625] ubi0:dml_code is mounted. [2025-09-24 08:25:33.625] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:25:33.625] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:25:33.625] ubi2:textures is mounted. [2025-09-24 08:25:33.625] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:25:33.625] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:25:33.625] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:25:33.648] data.LB_FadeInType0=100 [2025-09-24 08:25:33.648] data.CHLH_FadeInType0=0 [2025-09-24 08:25:33.648] data.WU_FadeInDelay=0 [2025-09-24 08:25:33.648] max_time_out=0 [2025-09-24 08:25:33.648] No splash screen [2025-09-24 08:25:33.648] stop dss Done [2025-09-24 08:25:33.664] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:25:33.680] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:25:33.715] /dev/mem opened. [2025-09-24 08:25:33.715] Memory mapped at address 0xffff86fbd000. [2025-09-24 08:25:33.715] Read at address 0x00600018 (0xffff86fbd018): 0x00000000 [2025-09-24 08:25:33.715] Write at address 0x00600018 (0xffff86fbd018): 0x00400040, readback 0x00400040 [2025-09-24 08:25:33.827] Loaded PowerVR consumer services. [2025-09-24 08:25:33.988] Waiting data available... [2025-09-24 08:25:34.004] 512+0 records in [2025-09-24 08:25:34.004] 512+0 records out [2025-09-24 08:25:34.051] Starting syslogd/klogd: done [2025-09-24 08:25:34.067] DML Start [2025-09-24 08:25:34.243] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:25:34.467] DML res1: 0 [2025-09-24 08:25:34.953] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:25:34.953] Read Success [2025-09-24 08:25:34.953] Verifying certificate... [2025-09-24 08:25:35.256] Verified OK [2025-09-24 08:25:35.320] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:25:36.952] Verified OK [2025-09-24 08:25:36.952] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:25:37.536] Verified OK [2025-09-24 08:25:37.536] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:25:39.966] fs.protected_hardlinks = 1 [2025-09-24 08:25:39.982] fs.protected_symlinks = 1 [2025-09-24 08:25:39.982] kernel.modules_disabled = 1 [2025-09-24 08:25:40.190] [2025-09-24 08:25:40.190] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:25:41.501] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:25:49.215] SBL1:1210.0.1.0 [2025-09-24 08:25:49.247] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:25:50.830] SBL2:1210.0.1.0 [2025-09-24 08:25:50.878] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:25:50.974] j-A [2025-09-24 08:25:58.328] The R5 Autosar Classic is running [2025-09-24 08:25:58.349] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:25:58.349] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:25:58.956] INIT: version 2.96 booting [2025-09-24 08:25:59.067] INIT: Entering runlevel: 5 [2025-09-24 08:25:59.211] mtd28 attached [2025-09-24 08:25:59.227] mtd24 attached [2025-09-24 08:25:59.243] mtd32 attached [2025-09-24 08:25:59.259] ubi0:animations is mounted. [2025-09-24 08:25:59.275] ubi1:textures is mounted. [2025-09-24 08:25:59.291] RTNETLINK answers: File exists [2025-09-24 08:25:59.351] ubi2:dml_code is mounted. [2025-09-24 08:25:59.351] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:25:59.351] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:25:59.351] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:25:59.351] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:25:59.351] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:25:59.351] data.LB_FadeInType0=100 [2025-09-24 08:25:59.351] data.CHLH_FadeInType0=0 [2025-09-24 08:25:59.351] data.WU_FadeInDelay=0 [2025-09-24 08:25:59.351] max_time_out=0 [2025-09-24 08:25:59.351] No splash screen [2025-09-24 08:25:59.351] stop dss Done [2025-09-24 08:25:59.399] /dev/mem opened. [2025-09-24 08:25:59.399] Memory mapped at address 0xffff85a14000. [2025-09-24 08:25:59.425] Read at address 0x00600018 (0xffff85a14018): 0x00000000 [2025-09-24 08:25:59.425] Write at address 0x00600018 (0xffff85a14018): 0x00400040, readback 0x00400040 [2025-09-24 08:25:59.456] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:25:59.456] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:25:59.664] Loaded PowerVR consumer services. [2025-09-24 08:25:59.697] Waiting data available... [2025-09-24 08:25:59.713] 512+0 records in [2025-09-24 08:25:59.713] 512+0 records out [2025-09-24 08:25:59.760] Starting syslogd/klogd: done [2025-09-24 08:25:59.776] DML Start [2025-09-24 08:25:59.936] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:26:00.128] DML res1: 0 [2025-09-24 08:26:00.559] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:26:00.559] Read Success [2025-09-24 08:26:00.559] Verifying certificate... [2025-09-24 08:26:00.862] Verified OK [2025-09-24 08:26:00.878] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:26:02.499] Verified OK [2025-09-24 08:26:02.499] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:26:03.058] Verified OK [2025-09-24 08:26:03.058] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:26:05.584] fs.protected_hardlinks = 1 [2025-09-24 08:26:05.600] fs.protected_symlinks = 1 [2025-09-24 08:26:05.600] kernel.modules_disabled = 1 [2025-09-24 08:26:05.792] [2025-09-24 08:26:05.792] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:26:07.211] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:26:14.902] SBL1:1210.0.1.0 [2025-09-24 08:26:14.934] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:26:16.517] SBL2:1210.0.1.0 [2025-09-24 08:26:16.565] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:26:16.661] j-A [2025-09-24 08:26:24.014] The R5 Autosar Classic is running [2025-09-24 08:26:24.014] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:26:24.035] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:26:24.642] INIT: version 2.96 booting [2025-09-24 08:26:24.771] INIT: Entering runlevel: 5 [2025-09-24 08:26:24.915] mtd32 attached [2025-09-24 08:26:24.931] mtd24 attached [2025-09-24 08:26:24.931] mtd28 attached [2025-09-24 08:26:24.995] RTNETLINK answers: File exists [2025-09-24 08:26:25.055] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:26:25.055] ubi1:textures is mounted. [2025-09-24 08:26:25.055] ubi2:animations is mounted. [2025-09-24 08:26:25.055] ubi0:dml_code is mounted. [2025-09-24 08:26:25.055] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:26:25.055] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:26:25.055] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:26:25.055] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:26:25.055] data.LB_FadeInType0=100 [2025-09-24 08:26:25.055] data.CHLH_FadeInType0=0 [2025-09-24 08:26:25.055] data.WU_FadeInDelay=0 [2025-09-24 08:26:25.055] max_time_out=0 [2025-09-24 08:26:25.055] No splash screen [2025-09-24 08:26:25.055] stop dss Done [2025-09-24 08:26:25.133] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:26:25.133] /dev/mem opened. [2025-09-24 08:26:25.133] Memory mapped at address 0xffffae6cf000. [2025-09-24 08:26:25.133] Read at address 0x00600018 (0xffffae6cf018): 0x00000000 [2025-09-24 08:26:25.133] Write at address 0x00600018 (0xffffae6cf018): 0x00400040, readback 0x00400040 [2025-09-24 08:26:25.133] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:26:25.389] Loaded PowerVR consumer services. [2025-09-24 08:26:25.405] Waiting data available... [2025-09-24 08:26:25.453] 512+0 records in [2025-09-24 08:26:25.453] 512+0 records out [2025-09-24 08:26:25.485] Starting syslogd/klogd: done [2025-09-24 08:26:25.501] DML Start [2025-09-24 08:26:25.645] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:26:25.885] DML res1: 0 [2025-09-24 08:26:26.395] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:26:26.395] Read Success [2025-09-24 08:26:26.395] Verifying certificate... [2025-09-24 08:26:26.650] Verified OK [2025-09-24 08:26:26.666] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:26:28.294] Verified OK [2025-09-24 08:26:28.294] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:26:28.939] Verified OK [2025-09-24 08:26:28.939] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:26:31.497] fs.protected_hardlinks = 1 [2025-09-24 08:26:31.513] fs.protected_symlinks = 1 [2025-09-24 08:26:31.513] kernel.modules_disabled = 1 [2025-09-24 08:26:31.704] [2025-09-24 08:26:31.704] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:26:32.911] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:26:40.622] SBL1:1210.0.1.0 [2025-09-24 08:26:40.670] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:26:42.236] SBL2:1210.0.1.0 [2025-09-24 08:26:42.285] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:26:42.397] j-A [2025-09-24 08:26:49.768] The R5 Autosar Classic is running [2025-09-24 08:26:49.768] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:26:49.768] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:26:50.375] INIT: version 2.96 booting [2025-09-24 08:26:50.487] INIT: Entering runlevel: 5 [2025-09-24 08:26:50.631] mtd24 attached [2025-09-24 08:26:50.647] mtd28 attached [2025-09-24 08:26:50.663] mtd32 attached [2025-09-24 08:26:50.711] RTNETLINK answers: File exists [2025-09-24 08:26:50.711] ubi1:animations is mounted. [2025-09-24 08:26:50.779] ubi0:textures is mounted. [2025-09-24 08:26:50.779] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:26:50.779] ubi2:dml_code is mounted. [2025-09-24 08:26:50.779] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:26:50.779] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:26:50.779] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:26:50.779] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:26:50.779] data.LB_FadeInType0=100 [2025-09-24 08:26:50.779] data.CHLH_FadeInType0=0 [2025-09-24 08:26:50.779] data.WU_FadeInDelay=0 [2025-09-24 08:26:50.779] max_time_out=0 [2025-09-24 08:26:50.779] No splash screen [2025-09-24 08:26:50.779] stop dss Done [2025-09-24 08:26:50.795] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:26:50.811] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:26:50.850] /dev/mem opened. [2025-09-24 08:26:50.850] Memory mapped at address 0xffff94f3d000. [2025-09-24 08:26:50.850] Read at address 0x00600018 (0xffff94f3d018): 0x00000000 [2025-09-24 08:26:50.850] Write at address 0x00600018 (0xffff94f3d018): 0x00400040, readback 0x00400040 [2025-09-24 08:26:51.058] Loaded PowerVR consumer services. [2025-09-24 08:26:51.137] Waiting data available... [2025-09-24 08:26:51.153] 512+0 records in [2025-09-24 08:26:51.153] 512+0 records out [2025-09-24 08:26:51.185] Starting syslogd/klogd: done [2025-09-24 08:26:51.201] DML Start [2025-09-24 08:26:51.362] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:26:51.569] DML res1: 0 [2025-09-24 08:26:52.030] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:26:52.030] Read Success [2025-09-24 08:26:52.030] Verifying certificate... [2025-09-24 08:26:52.254] Verified OK [2025-09-24 08:26:52.286] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:26:53.878] Verified OK [2025-09-24 08:26:53.878] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:26:54.530] Verified OK [2025-09-24 08:26:54.530] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:26:57.168] fs.protected_hardlinks = 1 [2025-09-24 08:26:57.168] fs.protected_symlinks = 1 [2025-09-24 08:26:57.184] kernel.modules_disabled = 1 [2025-09-24 08:26:57.360] [2025-09-24 08:26:57.360] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:26:58.614] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:27:06.331] SBL1:1210.0.1.0 [2025-09-24 08:27:06.363] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:27:07.946] SBL2:1210.0.1.0 [2025-09-24 08:27:07.994] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:27:08.090] j-A [2025-09-24 08:27:15.444] The R5 Autosar Classic is running [2025-09-24 08:27:15.466] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:27:15.466] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:27:16.074] INIT: version 2.96 booting [2025-09-24 08:27:16.185] INIT: Entering runlevel: 5 [2025-09-24 08:27:16.345] mtd32 attached [2025-09-24 08:27:16.345] mtd24 attached [2025-09-24 08:27:16.361] mtd28 attached [2025-09-24 08:27:16.409] ubi0:dml_code is mounted. [2025-09-24 08:27:16.409] RTNETLINK answers: File exists [2025-09-24 08:27:16.469] ubi1:textures is mounted. [2025-09-24 08:27:16.469] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:27:16.469] ubi2:animations is mounted. [2025-09-24 08:27:16.469] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:27:16.469] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:27:16.469] data.LB_FadeInType0=100 [2025-09-24 08:27:16.469] data.CHLH_FadeInType0=0 [2025-09-24 08:27:16.469] data.WU_FadeInDelay=0 [2025-09-24 08:27:16.469] max_time_out=0 [2025-09-24 08:27:16.469] No splash screen [2025-09-24 08:27:16.469] stop dss Done [2025-09-24 08:27:16.469] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:27:16.469] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:27:16.540] /dev/mem opened. [2025-09-24 08:27:16.540] Memory mapped at address 0xffffa276d000. [2025-09-24 08:27:16.540] Read at address 0x00600018 (0xffffa276d018): 0x00000000 [2025-09-24 08:27:16.540] Write at address 0x00600018 (0xffffa276d018): 0x00400040, readback 0x00400040 [2025-09-24 08:27:16.540] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:27:16.556] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:27:16.795] Loaded PowerVR consumer services. [2025-09-24 08:27:16.811] Waiting data available... [2025-09-24 08:27:16.844] 512+0 records in [2025-09-24 08:27:16.844] 512+0 records out [2025-09-24 08:27:16.891] Starting syslogd/klogd: done [2025-09-24 08:27:16.907] DML Start [2025-09-24 08:27:17.035] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:27:17.226] DML res1: 0 [2025-09-24 08:27:17.801] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:27:17.801] Read Success [2025-09-24 08:27:17.801] Verifying certificate... [2025-09-24 08:27:18.073] Verified OK [2025-09-24 08:27:18.089] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:27:19.719] Verified OK [2025-09-24 08:27:19.719] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:27:20.247] Verified OK [2025-09-24 08:27:20.263] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:27:22.805] fs.protected_hardlinks = 1 [2025-09-24 08:27:22.805] fs.protected_symlinks = 1 [2025-09-24 08:27:22.821] kernel.modules_disabled = 1 [2025-09-24 08:27:23.013] [2025-09-24 08:27:23.013] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:27:24.302] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:27:32.040] SBL1:1210.0.1.0 [2025-09-24 08:27:32.088] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:27:33.654] SBL2:1210.0.1.0 [2025-09-24 08:27:33.702] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:27:33.798] j-A [2025-09-24 08:27:41.153] The R5 Autosar Classic is running [2025-09-24 08:27:41.177] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:27:41.177] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:27:41.784] INIT: version 2.96 booting [2025-09-24 08:27:41.896] INIT: Entering runlevel: 5 [2025-09-24 08:27:42.041] mtd24 attached [2025-09-24 08:27:42.056] mtd32 attached [2025-09-24 08:27:42.072] mtd28 attached [2025-09-24 08:27:42.104] ubi0:textures is mounted. [2025-09-24 08:27:42.120] RTNETLINK answers: File exists [2025-09-24 08:27:42.120] ubi1:dml_code is mounted. [2025-09-24 08:27:42.174] ubi2:animations is mounted. [2025-09-24 08:27:42.174] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:27:42.174] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:27:42.174] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:27:42.174] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:27:42.174] data.LB_FadeInType0=100 [2025-09-24 08:27:42.174] data.CHLH_FadeInType0=0 [2025-09-24 08:27:42.174] data.WU_FadeInDelay=0 [2025-09-24 08:27:42.174] max_time_out=0 [2025-09-24 08:27:42.174] No splash screen [2025-09-24 08:27:42.174] stop dss Done [2025-09-24 08:27:42.174] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:27:42.239] /dev/mem opened. [2025-09-24 08:27:42.239] Memory mapped at address 0xffff93e9d000. [2025-09-24 08:27:42.239] Read at address 0x00600018 (0xffff93e9d018): 0x00000000 [2025-09-24 08:27:42.239] Write at address 0x00600018 (0xffff93e9d018): 0x00400040, readback 0x00400040 [2025-09-24 08:27:42.255] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:27:42.271] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:27:42.367] Loaded PowerVR consumer services. [2025-09-24 08:27:42.527] Waiting data available... [2025-09-24 08:27:42.543] 512+0 records in [2025-09-24 08:27:42.543] 512+0 records out [2025-09-24 08:27:42.590] Starting syslogd/klogd: done [2025-09-24 08:27:42.607] DML Start [2025-09-24 08:27:42.798] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:27:43.023] DML res1: 0 [2025-09-24 08:27:43.406] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:27:43.429] Read Success [2025-09-24 08:27:43.429] Verifying certificate... [2025-09-24 08:27:43.716] Verified OK [2025-09-24 08:27:43.732] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:27:45.507] Verified OK [2025-09-24 08:27:45.507] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:27:46.064] Verified OK [2025-09-24 08:27:46.064] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:27:48.510] fs.protected_hardlinks = 1 [2025-09-24 08:27:48.510] fs.protected_symlinks = 1 [2025-09-24 08:27:48.526] kernel.modules_disabled = 1 [2025-09-24 08:27:48.717] [2025-09-24 08:27:48.717] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:27:50.024] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:27:57.729] SBL1:1210.0.1.0 [2025-09-24 08:27:57.777] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:27:59.344] SBL2:1210.0.1.0 [2025-09-24 08:27:59.392] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:27:59.504] j-A [2025-09-24 08:28:06.877] The R5 Autosar Classic is running [2025-09-24 08:28:06.877] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:28:06.877] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:28:07.485] INIT: version 2.96 booting [2025-09-24 08:28:07.581] INIT: Entering runlevel: 5 [2025-09-24 08:28:07.741] mtd32 attached [2025-09-24 08:28:07.757] mtd24 attached [2025-09-24 08:28:07.773] mtd28 attached [2025-09-24 08:28:07.804] ubi0:dml_code is mounted. [2025-09-24 08:28:07.804] RTNETLINK answers: File exists [2025-09-24 08:28:07.871] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:28:07.871] ubi2:animations is mounted. [2025-09-24 08:28:07.871] ubi1:textures is mounted. [2025-09-24 08:28:07.871] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:28:07.871] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:28:07.871] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:28:07.871] data.LB_FadeInType0=100 [2025-09-24 08:28:07.871] data.CHLH_FadeInType0=0 [2025-09-24 08:28:07.871] data.WU_FadeInDelay=0 [2025-09-24 08:28:07.871] max_time_out=0 [2025-09-24 08:28:07.871] No splash screen [2025-09-24 08:28:07.871] stop dss Done [2025-09-24 08:28:07.871] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:28:07.903] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:28:07.945] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:28:07.945] /dev/mem opened. [2025-09-24 08:28:07.945] Memory mapped at address 0xffffacf29000. [2025-09-24 08:28:07.945] Read at address 0x00600018 (0xffffacf29018): 0x00000000 [2025-09-24 08:28:07.945] Write at address 0x00600018 (0xffffacf29018): 0x00400040, readback 0x00400040 [2025-09-24 08:28:08.058] Loaded PowerVR consumer services. [2025-09-24 08:28:08.218] Waiting data available... [2025-09-24 08:28:08.249] 512+0 records in [2025-09-24 08:28:08.249] 512+0 records out [2025-09-24 08:28:08.281] Starting syslogd/klogd: done [2025-09-24 08:28:08.297] DML Start [2025-09-24 08:28:08.457] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:28:08.680] DML res1: 0 [2025-09-24 08:28:09.187] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:28:09.187] Read Success [2025-09-24 08:28:09.187] Verifying certificate... [2025-09-24 08:28:09.442] Verified OK [2025-09-24 08:28:09.458] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:28:11.161] Verified OK [2025-09-24 08:28:11.161] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:28:11.704] Verified OK [2025-09-24 08:28:11.704] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:28:14.214] fs.protected_hardlinks = 1 [2025-09-24 08:28:14.214] fs.protected_symlinks = 1 [2025-09-24 08:28:14.230] kernel.modules_disabled = 1 [2025-09-24 08:28:14.421] [2025-09-24 08:28:14.421] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:28:15.712] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:28:23.444] SBL1:1210.0.1.0 [2025-09-24 08:28:23.492] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:28:25.058] SBL2:1210.0.1.0 [2025-09-24 08:28:25.106] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:28:25.217] j-A [2025-09-24 08:28:32.588] The R5 Autosar Classic is running [2025-09-24 08:28:32.588] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:28:32.588] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:28:33.196] INIT: version 2.96 booting [2025-09-24 08:28:33.307] INIT: Entering runlevel: 5 [2025-09-24 08:28:33.452] mtd32 attached [2025-09-24 08:28:33.468] mtd28 attached [2025-09-24 08:28:33.483] mtd24 attached [2025-09-24 08:28:33.515] ubi0:dml_code is mounted. [2025-09-24 08:28:33.562] RTNETLINK answers: File exists [2025-09-24 08:28:33.562] ubi1:animations is mounted. [2025-09-24 08:28:33.562] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:28:33.562] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:28:33.562] ubi2:textures is mounted. [2025-09-24 08:28:33.562] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:28:33.562] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:28:33.562] data.LB_FadeInType0=100 [2025-09-24 08:28:33.588] data.CHLH_FadeInType0=0 [2025-09-24 08:28:33.588] data.WU_FadeInDelay=0 [2025-09-24 08:28:33.588] max_time_out=0 [2025-09-24 08:28:33.588] No splash screen [2025-09-24 08:28:33.588] stop dss Done [2025-09-24 08:28:33.588] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:28:33.670] /dev/mem opened. [2025-09-24 08:28:33.670] Memory mapped at address 0xffff84c8e000. [2025-09-24 08:28:33.670] Read at address 0x00600018 (0xffff84c8e018): 0x00000000 [2025-09-24 08:28:33.670] Write at address 0x00600018 (0xffff84c8e018): 0x00400040, readback 0x00400040 [2025-09-24 08:28:33.716] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:28:33.716] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:28:33.796] Loaded PowerVR consumer services. [2025-09-24 08:28:33.956] Waiting data available... [2025-09-24 08:28:33.972] 512+0 records in [2025-09-24 08:28:33.972] 512+0 records out [2025-09-24 08:28:34.020] Starting syslogd/klogd: done [2025-09-24 08:28:34.036] DML Start [2025-09-24 08:28:34.228] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:28:34.468] DML res1: 0 [2025-09-24 08:28:34.786] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:28:34.786] Read Success [2025-09-24 08:28:34.786] Verifying certificate... [2025-09-24 08:28:35.074] Verified OK [2025-09-24 08:28:35.090] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:28:36.744] Verified OK [2025-09-24 08:28:36.744] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:28:37.346] Verified OK [2025-09-24 08:28:37.346] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:28:40.048] fs.protected_hardlinks = 1 [2025-09-24 08:28:40.048] fs.protected_symlinks = 1 [2025-09-24 08:28:40.063] kernel.modules_disabled = 1 [2025-09-24 08:28:40.240] [2025-09-24 08:28:40.240] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:28:41.464] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:28:49.147] SBL1:1210.0.1.0 [2025-09-24 08:28:49.195] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:28:50.762] SBL2:1210.0.1.0 [2025-09-24 08:28:50.809] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:28:50.922] j-A [2025-09-24 08:28:58.261] The R5 Autosar Classic is running [2025-09-24 08:28:58.292] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:28:58.292] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:28:58.899] INIT: version 2.96 booting [2025-09-24 08:28:59.012] INIT: Entering runlevel: 5 [2025-09-24 08:28:59.155] mtd24 attached [2025-09-24 08:28:59.171] mtd28 attached [2025-09-24 08:28:59.187] mtd32 attached [2025-09-24 08:28:59.203] ubi0:textures is mounted. [2025-09-24 08:28:59.235] RTNETLINK answers: File exists [2025-09-24 08:28:59.235] ubi1:animations is mounted. [2025-09-24 08:28:59.299] ubi2:dml_code is mounted. [2025-09-24 08:28:59.299] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:28:59.299] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:28:59.299] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:28:59.299] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:28:59.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:28:59.299] data.LB_FadeInType0=100 [2025-09-24 08:28:59.299] data.CHLH_FadeInType0=0 [2025-09-24 08:28:59.299] data.WU_FadeInDelay=0 [2025-09-24 08:28:59.299] max_time_out=0 [2025-09-24 08:28:59.299] No splash screen [2025-09-24 08:28:59.299] stop dss Done [2025-09-24 08:28:59.372] /dev/mem opened. [2025-09-24 08:28:59.372] Memory mapped at address 0xffff84a31000. [2025-09-24 08:28:59.372] Read at address 0x00600018 (0xffff84a31018): 0x00000000 [2025-09-24 08:28:59.372] Write at address 0x00600018 (0xffff84a31018): 0x00400040, readback 0x00400040 [2025-09-24 08:28:59.388] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:28:59.413] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:28:59.667] Loaded PowerVR consumer services. [2025-09-24 08:28:59.667] Waiting data available... [2025-09-24 08:28:59.683] 512+0 records in [2025-09-24 08:28:59.683] 512+0 records out [2025-09-24 08:28:59.714] Starting syslogd/klogd: done [2025-09-24 08:28:59.730] DML Start [2025-09-24 08:28:59.907] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:29:00.162] DML res1: 0 [2025-09-24 08:29:00.531] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:29:00.531] Read Success [2025-09-24 08:29:00.546] Verifying certificate... [2025-09-24 08:29:00.769] Verified OK [2025-09-24 08:29:00.785] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:29:02.592] Verified OK [2025-09-24 08:29:02.592] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:29:03.136] Verified OK [2025-09-24 08:29:03.136] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:29:05.534] fs.protected_hardlinks = 1 [2025-09-24 08:29:05.550] fs.protected_symlinks = 1 [2025-09-24 08:29:05.550] kernel.modules_disabled = 1 [2025-09-24 08:29:05.741] [2025-09-24 08:29:05.741] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:29:07.269] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:29:14.849] SBL1:1210.0.1.0 [2025-09-24 08:29:14.897] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:29:16.464] SBL2:1210.0.1.0 [2025-09-24 08:29:16.512] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:29:16.608] j-A [2025-09-24 08:29:23.963] The R5 Autosar Classic is running [2025-09-24 08:29:23.986] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:29:23.986] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:29:24.593] INIT: version 2.96 booting [2025-09-24 08:29:24.705] INIT: Entering runlevel: 5 [2025-09-24 08:29:24.865] mtd28 attached [2025-09-24 08:29:24.865] mtd24 attached [2025-09-24 08:29:24.881] mtd32 attached [2025-09-24 08:29:24.929] RTNETLINK answers: File exists [2025-09-24 08:29:24.929] ubi0:animations is mounted. [2025-09-24 08:29:24.995] ubi1:textures is mounted. [2025-09-24 08:29:24.995] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:29:24.995] ubi2:dml_code is mounted. [2025-09-24 08:29:24.995] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:29:24.995] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:29:24.995] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:29:24.995] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:29:24.995] data.LB_FadeInType0=100 [2025-09-24 08:29:24.995] data.CHLH_FadeInType0=0 [2025-09-24 08:29:24.995] data.WU_FadeInDelay=0 [2025-09-24 08:29:24.995] max_time_out=0 [2025-09-24 08:29:24.995] No splash screen [2025-09-24 08:29:24.995] stop dss Done [2025-09-24 08:29:25.043] /dev/mem opened. [2025-09-24 08:29:25.043] Memory mapped at address 0xffffaddc7000. [2025-09-24 08:29:25.084] Read at address 0x00600018 (0xffffaddc7018): 0x00000000 [2025-09-24 08:29:25.084] Write at address 0x00600018 (0xffffaddc7018): 0x00400040, readback 0x00400040 [2025-09-24 08:29:25.084] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:29:25.084] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:29:25.211] Loaded PowerVR consumer services. [2025-09-24 08:29:25.340] Waiting data available... [2025-09-24 08:29:25.372] 512+0 records in [2025-09-24 08:29:25.372] 512+0 records out [2025-09-24 08:29:25.419] Starting syslogd/klogd: done [2025-09-24 08:29:25.435] DML Start [2025-09-24 08:29:25.580] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:29:25.820] DML res1: 0 [2025-09-24 08:29:26.236] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:29:26.252] Read Success [2025-09-24 08:29:26.252] Verifying certificate... [2025-09-24 08:29:26.475] Verified OK [2025-09-24 08:29:26.491] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:29:28.176] Verified OK [2025-09-24 08:29:28.176] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:29:28.797] Verified OK [2025-09-24 08:29:28.797] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:29:31.435] fs.protected_hardlinks = 1 [2025-09-24 08:29:31.451] fs.protected_symlinks = 1 [2025-09-24 08:29:31.451] kernel.modules_disabled = 1 [2025-09-24 08:29:31.643] [2025-09-24 08:29:31.643] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:29:32.902] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:29:40.564] SBL1:1210.0.1.0 [2025-09-24 08:29:40.611] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:29:42.178] SBL2:1210.0.1.0 [2025-09-24 08:29:42.227] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:29:42.338] j-A [2025-09-24 08:29:49.677] The R5 Autosar Classic is running [2025-09-24 08:29:49.707] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:29:49.707] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:29:50.315] INIT: version 2.96 booting [2025-09-24 08:29:50.427] INIT: Entering runlevel: 5 [2025-09-24 08:29:50.587] mtd32 attached [2025-09-24 08:29:50.587] mtd24 attached [2025-09-24 08:29:50.603] mtd28 attached [2025-09-24 08:29:50.651] ubi0:dml_code is mounted. [2025-09-24 08:29:50.651] RTNETLINK answers: File exists [2025-09-24 08:29:50.708] ubi2:animations is mounted. [2025-09-24 08:29:50.708] ubi1:textures is mounted. [2025-09-24 08:29:50.708] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:29:50.708] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:29:50.708] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:29:50.708] data.LB_FadeInType0=100 [2025-09-24 08:29:50.708] data.CHLH_FadeInType0=0 [2025-09-24 08:29:50.708] data.WU_FadeInDelay=0 [2025-09-24 08:29:50.708] max_time_out=0 [2025-09-24 08:29:50.708] No splash screen [2025-09-24 08:29:50.708] stop dss Done [2025-09-24 08:29:50.708] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:29:50.708] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:29:50.779] /dev/mem opened. [2025-09-24 08:29:50.779] Memory mapped at address 0xffff9ffe9000. [2025-09-24 08:29:50.779] Read at address 0x00600018 (0xffff9ffe9018): 0x00000000 [2025-09-24 08:29:50.779] Write at address 0x00600018 (0xffff9ffe9018): 0x00400040, readback 0x00400040 [2025-09-24 08:29:50.810] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:29:50.810] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:29:50.954] Loaded PowerVR consumer services. [2025-09-24 08:29:51.066] Waiting data available... [2025-09-24 08:29:51.082] 512+0 records in [2025-09-24 08:29:51.082] 512+0 records out [2025-09-24 08:29:51.129] Starting syslogd/klogd: done [2025-09-24 08:29:51.145] DML Start [2025-09-24 08:29:51.322] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:29:51.578] DML res1: 0 [2025-09-24 08:29:52.063] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:29:52.063] Read Success [2025-09-24 08:29:52.063] Verifying certificate... [2025-09-24 08:29:52.287] Verified OK [2025-09-24 08:29:52.287] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:29:54.026] Verified OK [2025-09-24 08:29:54.026] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:29:54.614] Verified OK [2025-09-24 08:29:54.614] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:29:57.124] fs.protected_hardlinks = 1 [2025-09-24 08:29:57.124] fs.protected_symlinks = 1 [2025-09-24 08:29:57.140] kernel.modules_disabled = 1 [2025-09-24 08:29:57.348] [2025-09-24 08:29:57.348] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:29:58.572] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:30:06.263] SBL1:1210.0.1.0 [2025-09-24 08:30:06.311] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:30:07.878] SBL2:1210.0.1.0 [2025-09-24 08:30:07.926] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:30:08.037] j-A [2025-09-24 08:30:15.376] The R5 Autosar Classic is running [2025-09-24 08:30:15.401] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:30:15.401] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:30:16.009] INIT: version 2.96 booting [2025-09-24 08:30:16.120] INIT: Entering runlevel: 5 [2025-09-24 08:30:16.281] mtd28 attached [2025-09-24 08:30:16.281] mtd24 attached [2025-09-24 08:30:16.296] mtd32 attached [2025-09-24 08:30:16.328] ubi0:animations is mounted. [2025-09-24 08:30:16.344] ubi1:textures is mounted. [2025-09-24 08:30:16.378] RTNETLINK answers: File exists [2025-09-24 08:30:16.378] ubi2:dml_code is mounted. [2025-09-24 08:30:16.378] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:30:16.378] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:30:16.378] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:30:16.378] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:30:16.410] data.LB_FadeInType0=100 [2025-09-24 08:30:16.410] data.CHLH_FadeInType0=0 [2025-09-24 08:30:16.410] data.WU_FadeInDelay=0 [2025-09-24 08:30:16.410] max_time_out=0 [2025-09-24 08:30:16.410] No splash screen [2025-09-24 08:30:16.410] stop dss Done [2025-09-24 08:30:16.410] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:30:16.477] /dev/mem opened. [2025-09-24 08:30:16.477] Memory mapped at address 0xffff839b8000. [2025-09-24 08:30:16.477] Read at address 0x00600018 (0xffff839b8018): 0x00000000 [2025-09-24 08:30:16.477] Write at address 0x00600018 (0xffff839b8018): 0x00400040, readback 0x00400040 [2025-09-24 08:30:16.493] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:30:16.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:30:16.589] Loaded PowerVR consumer services. [2025-09-24 08:30:16.748] Waiting data available... [2025-09-24 08:30:16.780] 512+0 records in [2025-09-24 08:30:16.780] 512+0 records out [2025-09-24 08:30:16.812] Starting syslogd/klogd: done [2025-09-24 08:30:16.828] DML Start [2025-09-24 08:30:17.036] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:30:17.276] DML res1: 0 [2025-09-24 08:30:17.656] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:30:17.656] Read Success [2025-09-24 08:30:17.656] Verifying certificate... [2025-09-24 08:30:17.929] Verified OK [2025-09-24 08:30:17.944] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:30:19.678] Verified OK [2025-09-24 08:30:19.678] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:30:20.204] Verified OK [2025-09-24 08:30:20.204] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:30:22.682] fs.protected_hardlinks = 1 [2025-09-24 08:30:22.698] fs.protected_symlinks = 1 [2025-09-24 08:30:22.698] kernel.modules_disabled = 1 [2025-09-24 08:30:22.906] [2025-09-24 08:30:22.906] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:30:24.327] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:30:31.971] SBL1:1210.0.1.0 [2025-09-24 08:30:32.019] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:30:33.587] SBL2:1210.0.1.0 [2025-09-24 08:30:33.635] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:30:33.730] j-A [2025-09-24 08:30:41.085] The R5 Autosar Classic is running [2025-09-24 08:30:41.109] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:30:41.109] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:30:41.716] INIT: version 2.96 booting [2025-09-24 08:30:41.829] INIT: Entering runlevel: 5 [2025-09-24 08:30:41.972] mtd24 attached [2025-09-24 08:30:41.988] mtd28 attached [2025-09-24 08:30:42.004] mtd32 attached [2025-09-24 08:30:42.036] ubi0:textures is mounted. [2025-09-24 08:30:42.110] ubi1:animations is mounted. [2025-09-24 08:30:42.110] RTNETLINK answers: File exists [2025-09-24 08:30:42.110] ubi2:dml_code is mounted. [2025-09-24 08:30:42.110] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:30:42.110] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:30:42.110] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:30:42.110] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:30:42.110] data.LB_FadeInType0=100 [2025-09-24 08:30:42.110] data.CHLH_FadeInType0=0 [2025-09-24 08:30:42.110] data.WU_FadeInDelay=0 [2025-09-24 08:30:42.110] max_time_out=0 [2025-09-24 08:30:42.110] No splash screen [2025-09-24 08:30:42.110] stop dss Done [2025-09-24 08:30:42.110] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:30:42.186] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:30:42.186] /dev/mem opened. [2025-09-24 08:30:42.186] Memory mapped at address 0xffffb5175000. [2025-09-24 08:30:42.186] Read at address 0x00600018 (0xffffb5175018): 0x00000000 [2025-09-24 08:30:42.186] Write at address 0x00600018 (0xffffb5175018): 0x00400040, readback 0x00400040 [2025-09-24 08:30:42.186] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:30:42.282] Loaded PowerVR consumer services. [2025-09-24 08:30:42.457] Waiting data available... [2025-09-24 08:30:42.474] 512+0 records in [2025-09-24 08:30:42.490] 512+0 records out [2025-09-24 08:30:42.538] Starting syslogd/klogd: done [2025-09-24 08:30:42.554] DML Start [2025-09-24 08:30:42.746] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:30:42.985] DML res1: 0 [2025-09-24 08:30:43.362] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:30:43.362] Read Success [2025-09-24 08:30:43.362] Verifying certificate... [2025-09-24 08:30:43.584] Verified OK [2025-09-24 08:30:43.617] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:30:45.375] Verified OK [2025-09-24 08:30:45.392] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:30:45.936] Verified OK [2025-09-24 08:30:45.936] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:30:48.430] fs.protected_hardlinks = 1 [2025-09-24 08:30:48.430] fs.protected_symlinks = 1 [2025-09-24 08:30:48.446] kernel.modules_disabled = 1 [2025-09-24 08:30:48.638] [2025-09-24 08:30:48.638] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:30:50.034] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:30:57.699] SBL1:1210.0.1.0 [2025-09-24 08:30:57.731] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:30:59.314] SBL2:1210.0.1.0 [2025-09-24 08:30:59.362] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:30:59.457] j-A [2025-09-24 08:31:06.812] The R5 Autosar Classic is running [2025-09-24 08:31:06.833] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:31:06.833] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:31:07.441] INIT: version 2.96 booting [2025-09-24 08:31:07.553] INIT: Entering runlevel: 5 [2025-09-24 08:31:07.713] mtd28 attached [2025-09-24 08:31:07.713] mtd24 attached [2025-09-24 08:31:07.729] mtd32 attached [2025-09-24 08:31:07.777] ubi0:animations is mounted. [2025-09-24 08:31:07.777] RTNETLINK answers: File exists [2025-09-24 08:31:07.819] ubi1:textures is mounted. [2025-09-24 08:31:07.819] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:31:07.819] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:31:07.819] ubi2:dml_code is mounted. [2025-09-24 08:31:07.819] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:31:07.819] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:31:07.819] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:31:07.843] data.LB_FadeInType0=100 [2025-09-24 08:31:07.843] data.CHLH_FadeInType0=0 [2025-09-24 08:31:07.843] data.WU_FadeInDelay=0 [2025-09-24 08:31:07.843] max_time_out=0 [2025-09-24 08:31:07.843] No splash screen [2025-09-24 08:31:07.843] stop dss Done [2025-09-24 08:31:07.859] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:31:07.875] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:31:07.930] /dev/mem opened. [2025-09-24 08:31:07.930] Memory mapped at address 0xffff98b76000. [2025-09-24 08:31:07.930] Read at address 0x00600018 (0xffff98b76018): 0x00000000 [2025-09-24 08:31:07.930] Write at address 0x00600018 (0xffff98b76018): 0x00400040, readback 0x00400040 [2025-09-24 08:31:08.138] Loaded PowerVR consumer services. [2025-09-24 08:31:08.169] Waiting data available... [2025-09-24 08:31:08.217] 512+0 records in [2025-09-24 08:31:08.217] 512+0 records out [2025-09-24 08:31:08.233] Starting syslogd/klogd: done [2025-09-24 08:31:08.249] DML Start [2025-09-24 08:31:08.410] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:31:08.666] DML res1: 0 [2025-09-24 08:31:09.094] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:31:09.094] Read Success [2025-09-24 08:31:09.094] Verifying certificate... [2025-09-24 08:31:09.365] Verified OK [2025-09-24 08:31:09.381] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:31:11.105] Verified OK [2025-09-24 08:31:11.105] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:31:11.754] Verified OK [2025-09-24 08:31:11.754] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:31:14.356] fs.protected_hardlinks = 1 [2025-09-24 08:31:14.356] fs.protected_symlinks = 1 [2025-09-24 08:31:14.356] kernel.modules_disabled = 1 [2025-09-24 08:31:14.531] [2025-09-24 08:31:14.531] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:31:15.697] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:31:23.413] SBL1:1210.0.1.0 [2025-09-24 08:31:23.445] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:31:25.027] SBL2:1210.0.1.0 [2025-09-24 08:31:25.076] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 08:31:25.172] j-A [2025-09-24 08:31:32.525] The R5 Autosar Classic is running [2025-09-24 08:31:32.548] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:31:32.548] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:31:33.156] INIT: version 2.96 booting [2025-09-24 08:31:33.268] INIT: Entering runlevel: 5 [2025-09-24 08:31:33.427] mtd24 attached [2025-09-24 08:31:33.443] mtd28 attached [2025-09-24 08:31:33.459] mtd32 attached [2025-09-24 08:31:33.491] ubi0:textures is mounted. [2025-09-24 08:31:33.508] RTNETLINK answers: File exists [2025-09-24 08:31:33.562] ubi1:animations is mounted. [2025-09-24 08:31:33.562] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:31:33.562] ubi2:dml_code is mounted. [2025-09-24 08:31:33.562] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:31:33.562] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:31:33.562] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:31:33.562] data.LB_FadeInType0=100 [2025-09-24 08:31:33.562] data.CHLH_FadeInType0=0 [2025-09-24 08:31:33.562] data.WU_FadeInDelay=0 [2025-09-24 08:31:33.562] max_time_out=0 [2025-09-24 08:31:33.562] No splash screen [2025-09-24 08:31:33.562] stop dss Done [2025-09-24 08:31:33.562] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:31:33.593] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:31:33.593] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:31:33.625] /dev/mem opened. [2025-09-24 08:31:33.625] Memory mapped at address 0xffff913f8000. [2025-09-24 08:31:33.625] Read at address 0x00600018 (0xffff913f8018): 0x00000000 [2025-09-24 08:31:33.625] Write at address 0x00600018 (0xffff913f8018): 0x00400040, readback 0x00400040 [2025-09-24 08:31:33.802] Loaded PowerVR consumer services. [2025-09-24 08:31:33.913] Waiting data available... [2025-09-24 08:31:33.961] 512+0 records in [2025-09-24 08:31:33.961] 512+0 records out [2025-09-24 08:31:33.993] Starting syslogd/klogd: done [2025-09-24 08:31:34.009] DML Start [2025-09-24 08:31:34.153] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:31:34.393] DML res1: 0 [2025-09-24 08:31:34.824] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:31:34.845] Read Success [2025-09-24 08:31:34.845] Verifying certificate... [2025-09-24 08:31:35.117] Verified OK [2025-09-24 08:31:35.133] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:31:36.711] Verified OK [2025-09-24 08:31:36.711] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:31:37.394] Verified OK [2025-09-24 08:31:37.394] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:31:40.016] fs.protected_hardlinks = 1 [2025-09-24 08:31:40.046] fs.protected_symlinks = 1 [2025-09-24 08:31:40.046] kernel.modules_disabled = 1 [2025-09-24 08:31:40.237] [2025-09-24 08:31:40.237] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:31:41.432] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:31:49.120] SBL1:1210.0.1.0 [2025-09-24 08:31:49.168] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:31:50.734] SBL2:1210.0.1.0 [2025-09-24 08:31:50.782] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:31:50.894] j-A [2025-09-24 08:31:58.232] The R5 Autosar Classic is running [2025-09-24 08:31:58.263] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:31:58.263] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:31:58.870] INIT: version 2.96 booting [2025-09-24 08:31:58.983] INIT: Entering runlevel: 5 [2025-09-24 08:31:59.142] mtd32 attached [2025-09-24 08:31:59.142] mtd28 attached [2025-09-24 08:31:59.158] mtd24 attached [2025-09-24 08:31:59.206] ubi0:dml_code is mounted. [2025-09-24 08:31:59.206] RTNETLINK answers: File exists [2025-09-24 08:31:59.254] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:31:59.254] ubi1:animations is mounted. [2025-09-24 08:31:59.254] ubi2:textures is mounted. [2025-09-24 08:31:59.254] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:31:59.254] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:31:59.254] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:31:59.254] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:31:59.280] data.LB_FadeInType0=100 [2025-09-24 08:31:59.280] data.CHLH_FadeInType0=0 [2025-09-24 08:31:59.280] data.WU_FadeInDelay=0 [2025-09-24 08:31:59.280] max_time_out=0 [2025-09-24 08:31:59.280] No splash screen [2025-09-24 08:31:59.280] stop dss Done [2025-09-24 08:31:59.312] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:31:59.328] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:31:59.362] /dev/mem opened. [2025-09-24 08:31:59.362] Memory mapped at address 0xffff9662b000. [2025-09-24 08:31:59.362] Read at address 0x00600018 (0xffff9662b018): 0x00000000 [2025-09-24 08:31:59.362] Write at address 0x00600018 (0xffff9662b018): 0x00400040, readback 0x00400040 [2025-09-24 08:31:59.521] Loaded PowerVR consumer services. [2025-09-24 08:31:59.634] Waiting data available... [2025-09-24 08:31:59.666] 512+0 records in [2025-09-24 08:31:59.666] 512+0 records out [2025-09-24 08:31:59.697] Starting syslogd/klogd: done [2025-09-24 08:31:59.713] DML Start [2025-09-24 08:31:59.857] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:32:00.065] DML res1: 0 [2025-09-24 08:32:00.641] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:32:00.657] Read Success [2025-09-24 08:32:00.657] Verifying certificate... [2025-09-24 08:32:00.881] Verified OK [2025-09-24 08:32:00.913] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:32:02.671] Verified OK [2025-09-24 08:32:02.688] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:32:03.225] Verified OK [2025-09-24 08:32:03.225] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:32:05.624] fs.protected_hardlinks = 1 [2025-09-24 08:32:05.640] fs.protected_symlinks = 1 [2025-09-24 08:32:05.640] kernel.modules_disabled = 1 [2025-09-24 08:32:05.848] [2025-09-24 08:32:05.848] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:32:07.136] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:32:14.837] SBL1:1210.0.1.0 [2025-09-24 08:32:14.885] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:32:16.451] SBL2:1210.0.1.0 [2025-09-24 08:32:16.499] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:32:16.611] j-A [2025-09-24 08:32:23.983] The R5 Autosar Classic is running [2025-09-24 08:32:23.983] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:32:23.983] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:32:24.591] INIT: version 2.96 booting [2025-09-24 08:32:24.686] INIT: Entering runlevel: 5 [2025-09-24 08:32:24.846] mtd24 attached [2025-09-24 08:32:24.862] mtd32 attached [2025-09-24 08:32:24.862] mtd28 attached [2025-09-24 08:32:24.910] ubi0:textures is mounted. [2025-09-24 08:32:24.971] RTNETLINK answers: File exists [2025-09-24 08:32:24.971] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:32:24.971] ubi2:animations is mounted. [2025-09-24 08:32:24.971] ubi1:dml_code is mounted. [2025-09-24 08:32:24.971] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:32:24.971] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:32:24.971] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:32:24.971] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:32:24.971] data.LB_FadeInType0=100 [2025-09-24 08:32:24.971] data.CHLH_FadeInType0=0 [2025-09-24 08:32:24.971] data.WU_FadeInDelay=0 [2025-09-24 08:32:24.971] max_time_out=0 [2025-09-24 08:32:24.971] No splash screen [2025-09-24 08:32:24.971] stop dss Done [2025-09-24 08:32:25.003] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:32:25.018] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:32:25.018] /dev/mem opened. [2025-09-24 08:32:25.045] Memory mapped at address 0xffffb744e000. [2025-09-24 08:32:25.045] Read at address 0x00600018 (0xffffb744e018): 0x00000000 [2025-09-24 08:32:25.045] Write at address 0x00600018 (0xffffb744e018): 0x00400040, readback 0x00400040 [2025-09-24 08:32:25.300] Loaded PowerVR consumer services. [2025-09-24 08:32:25.316] Waiting data available... [2025-09-24 08:32:25.347] 512+0 records in [2025-09-24 08:32:25.347] 512+0 records out [2025-09-24 08:32:25.396] Starting syslogd/klogd: done [2025-09-24 08:32:25.412] DML Start [2025-09-24 08:32:25.572] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:32:25.796] DML res1: 0 [2025-09-24 08:32:26.274] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:32:26.274] Read Success [2025-09-24 08:32:26.274] Verifying certificate... [2025-09-24 08:32:26.497] Verified OK [2025-09-24 08:32:26.513] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:32:28.031] Verified OK [2025-09-24 08:32:28.031] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:32:28.668] Verified OK [2025-09-24 08:32:28.668] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:32:31.339] fs.protected_hardlinks = 1 [2025-09-24 08:32:31.339] fs.protected_symlinks = 1 [2025-09-24 08:32:31.354] kernel.modules_disabled = 1 [2025-09-24 08:32:31.546] [2025-09-24 08:32:31.546] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:32:32.830] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:32:40.533] SBL1:1210.0.1.0 [2025-09-24 08:32:40.580] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:32:42.162] SBL2:1210.0.1.0 [2025-09-24 08:32:42.194] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:32:42.307] j-A [2025-09-24 08:32:49.682] The R5 Autosar Classic is running [2025-09-24 08:32:49.682] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:32:49.682] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:32:50.288] INIT: version 2.96 booting [2025-09-24 08:32:50.401] INIT: Entering runlevel: 5 [2025-09-24 08:32:50.545] mtd24 attached [2025-09-24 08:32:50.561] mtd28 attached [2025-09-24 08:32:50.561] mtd32 attached [2025-09-24 08:32:50.608] ubi0:textures is mounted. [2025-09-24 08:32:50.625] RTNETLINK answers: File exists [2025-09-24 08:32:50.659] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:32:50.659] ubi2:dml_code is mounted. [2025-09-24 08:32:50.659] ubi1:animations is mounted. [2025-09-24 08:32:50.659] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:32:50.659] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:32:50.659] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:32:50.659] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:32:50.680] data.LB_FadeInType0=100 [2025-09-24 08:32:50.680] data.CHLH_FadeInType0=0 [2025-09-24 08:32:50.680] data.WU_FadeInDelay=0 [2025-09-24 08:32:50.680] max_time_out=0 [2025-09-24 08:32:50.680] No splash screen [2025-09-24 08:32:50.680] stop dss Done [2025-09-24 08:32:50.719] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:32:50.719] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:32:50.758] /dev/mem opened. [2025-09-24 08:32:50.758] Memory mapped at address 0xffffaa4e3000. [2025-09-24 08:32:50.758] Read at address 0x00600018 (0xffffaa4e3018): 0x00000000 [2025-09-24 08:32:50.758] Write at address 0x00600018 (0xffffaa4e3018): 0x00400040, readback 0x00400040 [2025-09-24 08:32:50.886] Loaded PowerVR consumer services. [2025-09-24 08:32:51.030] Waiting data available... [2025-09-24 08:32:51.062] 512+0 records in [2025-09-24 08:32:51.062] 512+0 records out [2025-09-24 08:32:51.110] Starting syslogd/klogd: done [2025-09-24 08:32:51.110] DML Start [2025-09-24 08:32:51.301] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:32:51.542] DML res1: 0 [2025-09-24 08:32:51.914] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:32:51.914] Read Success [2025-09-24 08:32:51.914] Verifying certificate... [2025-09-24 08:32:52.138] Verified OK [2025-09-24 08:32:52.154] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:32:53.811] Verified OK [2025-09-24 08:32:53.811] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:32:54.418] Verified OK [2025-09-24 08:32:54.418] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:32:55.250] 5491 GC [0] [2025-09-24 08:32:55.329] 5559 GC [1] [2025-09-24 08:32:55.394] 5640 GC [2] [2025-09-24 08:32:55.474] 5703 GC [3] [2025-09-24 08:32:55.553] 5781 GC [4] [2025-09-24 08:32:55.617] 5859 GC [5] [2025-09-24 08:32:55.681] 5920 GC [6] [2025-09-24 08:32:55.761] 5992 GC [7] [2025-09-24 08:32:55.825] 6072 GC [8] [2025-09-24 08:32:55.905] 6133 GC [9] [2025-09-24 08:32:55.969] 6210 GC [10] [2025-09-24 08:32:56.049] 6279 GC [11] [2025-09-24 08:32:56.113] 6352 GC [12] [2025-09-24 08:32:56.177] 6413 GC [13] [2025-09-24 08:32:56.225] 6472 GC [14] [2025-09-24 08:32:56.288] 6523 GC [15] [2025-09-24 08:32:56.352] 6590 GC [16] [2025-09-24 08:32:56.416] 6652 GC [17] [2025-09-24 08:32:56.481] 6708 GC [18] [2025-09-24 08:32:56.529] 6772 GC [19] [2025-09-24 08:32:56.592] 6833 GC [20] [2025-09-24 08:32:56.657] 6893 GC [21] [2025-09-24 08:32:56.721] 6961 GC [22] [2025-09-24 08:32:56.784] 7022 GC [23] [2025-09-24 08:32:56.848] 7080 GC [24] [2025-09-24 08:32:56.912] 7142 GC [25] [2025-09-24 08:32:56.977] 7209 GC [26] [2025-09-24 08:32:57.040] 7272 GC [27] [2025-09-24 08:32:57.072] fs.protected_hardlinks = 1 [2025-09-24 08:32:57.088] fs.protected_symlinks = 1 [2025-09-24 08:32:57.104] kernel.modules_disabled = 1 [2025-09-24 08:32:57.104] 7339 GC [28] [2025-09-24 08:32:57.104] 7351 GC [29] [2025-09-24 08:32:57.184] GC DONE [2025-09-24 08:32:57.297] [2025-09-24 08:32:57.297] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:32:58.503] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:33:06.239] SBL1:1210.0.1.0 [2025-09-24 08:33:06.287] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:33:07.854] SBL2:1210.0.1.0 [2025-09-24 08:33:07.886] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:33:07.997] j-A [2025-09-24 08:33:15.352] The R5 Autosar Classic is running [2025-09-24 08:33:15.352] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:33:15.373] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:33:15.980] INIT: version 2.96 booting [2025-09-24 08:33:16.092] INIT: Entering runlevel: 5 [2025-09-24 08:33:16.253] mtd32 attached [2025-09-24 08:33:16.253] mtd28 attached [2025-09-24 08:33:16.269] mtd24 attached [2025-09-24 08:33:16.300] ubi0:dml_code is mounted. [2025-09-24 08:33:16.316] RTNETLINK answers: File exists [2025-09-24 08:33:16.374] ubi1:animations is mounted. [2025-09-24 08:33:16.374] ubi2:textures is mounted. [2025-09-24 08:33:16.374] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:33:16.374] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:33:16.374] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:33:16.374] data.LB_FadeInType0=100 [2025-09-24 08:33:16.374] data.CHLH_FadeInType0=0 [2025-09-24 08:33:16.374] data.WU_FadeInDelay=0 [2025-09-24 08:33:16.374] max_time_out=0 [2025-09-24 08:33:16.374] No splash screen [2025-09-24 08:33:16.374] stop dss Done [2025-09-24 08:33:16.374] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:33:16.374] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:33:16.441] /dev/mem opened. [2025-09-24 08:33:16.441] Memory mapped at address 0xffffb76c5000. [2025-09-24 08:33:16.441] Read at address 0x00600018 (0xffffb76c5018): 0x00000000 [2025-09-24 08:33:16.441] Write at address 0x00600018 (0xffffb76c5018): 0x00400040, readback 0x00400040 [2025-09-24 08:33:16.489] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:33:16.505] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:33:16.601] Loaded PowerVR consumer services. [2025-09-24 08:33:16.709] Waiting data available... [2025-09-24 08:33:16.709] 512+0 records in [2025-09-24 08:33:16.709] 512+0 records out [2025-09-24 08:33:16.742] Starting syslogd/klogd: done [2025-09-24 08:33:16.758] DML Start [2025-09-24 08:33:16.919] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:33:17.158] DML res1: 0 [2025-09-24 08:33:17.605] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:33:17.621] Read Success [2025-09-24 08:33:17.621] Verifying certificate... [2025-09-24 08:33:17.861] Verified OK [2025-09-24 08:33:17.877] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:33:19.353] Verified OK [2025-09-24 08:33:19.353] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:33:19.912] Verified OK [2025-09-24 08:33:19.912] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:33:22.774] fs.protected_hardlinks = 1 [2025-09-24 08:33:22.790] fs.protected_symlinks = 1 [2025-09-24 08:33:22.790] kernel.modules_disabled = 1 [2025-09-24 08:33:22.982] [2025-09-24 08:33:22.982] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:33:24.253] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:33:31.953] SBL1:1210.0.1.0 [2025-09-24 08:33:31.985] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:33:33.567] SBL2:1210.0.1.0 [2025-09-24 08:33:33.599] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:33:33.695] j-A [2025-09-24 08:33:41.050] The R5 Autosar Classic is running [2025-09-24 08:33:41.075] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:33:41.075] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:33:41.682] INIT: version 2.96 booting [2025-09-24 08:33:41.794] INIT: Entering runlevel: 5 [2025-09-24 08:33:41.954] mtd24 attached [2025-09-24 08:33:41.954] mtd32 attached [2025-09-24 08:33:41.970] mtd28 attached [2025-09-24 08:33:41.986] ubi0:textures is mounted. [2025-09-24 08:33:42.018] RTNETLINK answers: File exists [2025-09-24 08:33:42.018] ubi2:animations is mounted. [2025-09-24 08:33:42.078] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:33:42.078] ubi1:dml_code is mounted. [2025-09-24 08:33:42.078] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:33:42.078] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:33:42.078] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:33:42.078] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:33:42.078] data.LB_FadeInType0=100 [2025-09-24 08:33:42.078] data.CHLH_FadeInType0=0 [2025-09-24 08:33:42.078] data.WU_FadeInDelay=0 [2025-09-24 08:33:42.078] max_time_out=0 [2025-09-24 08:33:42.078] No splash screen [2025-09-24 08:33:42.078] stop dss Done [2025-09-24 08:33:42.094] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:33:42.117] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:33:42.156] /dev/mem opened. [2025-09-24 08:33:42.156] Memory mapped at address 0xffff830af000. [2025-09-24 08:33:42.156] Read at address 0x00600018 (0xffff830af018): 0x00000000 [2025-09-24 08:33:42.156] Write at address 0x00600018 (0xffff830af018): 0x00400040, readback 0x00400040 [2025-09-24 08:33:42.332] Loaded PowerVR consumer services. [2025-09-24 08:33:42.364] 512+0 records in [2025-09-24 08:33:42.364] 512+0 records out [2025-09-24 08:33:42.380] Waiting data available... [2025-09-24 08:33:42.395] Starting syslogd/klogd: done [2025-09-24 08:33:42.411] DML Start [2025-09-24 08:33:42.588] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:33:42.827] DML res1: 0 [2025-09-24 08:33:43.312] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:33:43.312] Read Success [2025-09-24 08:33:43.312] Verifying certificate... [2025-09-24 08:33:43.535] Verified OK [2025-09-24 08:33:43.551] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:33:45.384] Verified OK [2025-09-24 08:33:45.384] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:33:45.911] Verified OK [2025-09-24 08:33:45.911] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:33:48.422] fs.protected_hardlinks = 1 [2025-09-24 08:33:48.422] fs.protected_symlinks = 1 [2025-09-24 08:33:48.438] kernel.modules_disabled = 1 [2025-09-24 08:33:48.629] [2025-09-24 08:33:48.629] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:33:49.905] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:33:57.656] SBL1:1210.0.1.0 [2025-09-24 08:33:57.688] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:33:59.271] SBL2:1210.0.1.0 [2025-09-24 08:33:59.303] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:33:59.399] j-A [2025-09-24 08:34:06.753] The R5 Autosar Classic is running [2025-09-24 08:34:06.778] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:34:06.778] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:34:07.386] INIT: version 2.96 booting [2025-09-24 08:34:07.497] INIT: Entering runlevel: 5 [2025-09-24 08:34:07.658] mtd28 attached [2025-09-24 08:34:07.658] mtd32 attached [2025-09-24 08:34:07.673] mtd24 attached [2025-09-24 08:34:07.721] ubi0:animations is mounted. [2025-09-24 08:34:07.721] RTNETLINK answers: File exists [2025-09-24 08:34:07.780] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:34:07.780] ubi1:dml_code is mounted. [2025-09-24 08:34:07.780] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:34:07.780] ubi2:textures is mounted. [2025-09-24 08:34:07.780] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:34:07.780] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:34:07.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:34:07.780] data.LB_FadeInType0=100 [2025-09-24 08:34:07.780] data.CHLH_FadeInType0=0 [2025-09-24 08:34:07.780] data.WU_FadeInDelay=0 [2025-09-24 08:34:07.780] max_time_out=0 [2025-09-24 08:34:07.780] No splash screen [2025-09-24 08:34:07.780] stop dss Done [2025-09-24 08:34:07.848] /dev/mem opened. [2025-09-24 08:34:07.848] Memory mapped at address 0xffff99e6b000. [2025-09-24 08:34:07.848] Read at address 0x00600018 (0xffff99e6b018): 0x00000000 [2025-09-24 08:34:07.848] Write at address 0x00600018 (0xffff99e6b018): 0x00400040, readback 0x00400040 [2025-09-24 08:34:07.863] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:34:07.879] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:34:07.943] Loaded PowerVR consumer services. [2025-09-24 08:34:08.071] 512+0 records in [2025-09-24 08:34:08.071] 512+0 records out [2025-09-24 08:34:08.087] Waiting data available... [2025-09-24 08:34:08.118] Starting syslogd/klogd: done [2025-09-24 08:34:08.135] DML Start [2025-09-24 08:34:08.326] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:34:08.551] DML res1: 0 [2025-09-24 08:34:09.040] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:34:09.040] Read Success [2025-09-24 08:34:09.040] Verifying certificate... [2025-09-24 08:34:09.328] Verified OK [2025-09-24 08:34:09.344] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:34:11.039] Verified OK [2025-09-24 08:34:11.039] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:34:11.597] Verified OK [2025-09-24 08:34:11.618] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:34:14.240] fs.protected_hardlinks = 1 [2025-09-24 08:34:14.256] fs.protected_symlinks = 1 [2025-09-24 08:34:14.256] kernel.modules_disabled = 1 [2025-09-24 08:34:14.448] [2025-09-24 08:34:14.448] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:34:15.658] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:34:23.370] SBL1:1210.0.1.0 [2025-09-24 08:34:23.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:34:24.985] SBL2:1210.0.1.0 [2025-09-24 08:34:25.017] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 08:34:25.129] j-A [2025-09-24 08:34:32.468] The R5 Autosar Classic is running [2025-09-24 08:34:32.493] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:34:32.493] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:34:33.100] INIT: version 2.96 booting [2025-09-24 08:34:33.212] INIT: Entering runlevel: 5 [2025-09-24 08:34:33.372] mtd28 attached [2025-09-24 08:34:33.372] mtd24 attached [2025-09-24 08:34:33.404] mtd32 attached [2025-09-24 08:34:33.436] ubi0:animations is mounted. [2025-09-24 08:34:33.502] RTNETLINK answers: File exists [2025-09-24 08:34:33.502] ubi1:textures is mounted. [2025-09-24 08:34:33.502] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:34:33.502] ubi2:dml_code is mounted. [2025-09-24 08:34:33.502] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:34:33.502] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:34:33.502] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:34:33.502] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:34:33.502] data.LB_FadeInType0=100 [2025-09-24 08:34:33.502] data.CHLH_FadeInType0=0 [2025-09-24 08:34:33.502] data.WU_FadeInDelay=0 [2025-09-24 08:34:33.502] max_time_out=0 [2025-09-24 08:34:33.502] No splash screen [2025-09-24 08:34:33.502] stop dss Done [2025-09-24 08:34:33.546] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:34:33.546] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:34:33.587] /dev/mem opened. [2025-09-24 08:34:33.587] Memory mapped at address 0xffff97aef000. [2025-09-24 08:34:33.587] Read at address 0x00600018 (0xffff97aef018): 0x00000000 [2025-09-24 08:34:33.587] Write at address 0x00600018 (0xffff97aef018): 0x00400040, readback 0x00400040 [2025-09-24 08:34:33.699] Loaded PowerVR consumer services. [2025-09-24 08:34:33.795] 512+0 records in [2025-09-24 08:34:33.795] 512+0 records out [2025-09-24 08:34:33.827] Waiting data available... [2025-09-24 08:34:33.859] Starting syslogd/klogd: done [2025-09-24 08:34:33.875] DML Start [2025-09-24 08:34:34.034] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:34:34.258] DML res1: 0 [2025-09-24 08:34:34.760] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:34:34.760] Read Success [2025-09-24 08:34:34.760] Verifying certificate... [2025-09-24 08:34:34.984] Verified OK [2025-09-24 08:34:35.000] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:34:36.662] Verified OK [2025-09-24 08:34:36.662] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:34:37.300] Verified OK [2025-09-24 08:34:37.300] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:34:39.761] fs.protected_hardlinks = 1 [2025-09-24 08:34:39.761] fs.protected_symlinks = 1 [2025-09-24 08:34:39.777] kernel.modules_disabled = 1 [2025-09-24 08:34:39.953] [2025-09-24 08:34:39.953] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:34:41.383] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:34:49.085] SBL1:1210.0.1.0 [2025-09-24 08:34:49.133] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:34:50.700] SBL2:1210.0.1.0 [2025-09-24 08:34:50.731] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:34:50.844] j-A [2025-09-24 08:34:58.215] The R5 Autosar Classic is running [2025-09-24 08:34:58.215] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:34:58.215] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:34:58.822] INIT: version 2.96 booting [2025-09-24 08:34:58.934] INIT: Entering runlevel: 5 [2025-09-24 08:34:59.078] mtd28 attached [2025-09-24 08:34:59.094] mtd24 attached [2025-09-24 08:34:59.110] mtd32 attached [2025-09-24 08:34:59.158] ubi0:animations is mounted. [2025-09-24 08:34:59.158] ubi1:textures is mounted. [2025-09-24 08:34:59.222] RTNETLINK answers: File exists [2025-09-24 08:34:59.222] ubi2:dml_code is mounted. [2025-09-24 08:34:59.222] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:34:59.222] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:34:59.222] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:34:59.222] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:34:59.222] data.LB_FadeInType0=100 [2025-09-24 08:34:59.222] data.CHLH_FadeInType0=0 [2025-09-24 08:34:59.222] data.WU_FadeInDelay=0 [2025-09-24 08:34:59.222] max_time_out=0 [2025-09-24 08:34:59.222] No splash screen [2025-09-24 08:34:59.222] stop dss Done [2025-09-24 08:34:59.222] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:34:59.270] /dev/mem opened. [2025-09-24 08:34:59.295] Memory mapped at address 0xffffbb2ca000. [2025-09-24 08:34:59.295] Read at address 0x00600018 (0xffffbb2ca018): 0x00000000 [2025-09-24 08:34:59.295] Write at address 0x00600018 (0xffffbb2ca018): 0x00400040, readback 0x00400040 [2025-09-24 08:34:59.328] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:34:59.354] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:34:59.386] Loaded PowerVR consumer services. [2025-09-24 08:34:59.497] 512+0 records in [2025-09-24 08:34:59.497] 512+0 records out [2025-09-24 08:34:59.513] Starting syslogd/klogd: done [2025-09-24 08:34:59.562] Waiting data available... [2025-09-24 08:34:59.562] DML Start [2025-09-24 08:34:59.754] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:34:59.962] DML res1: 0 [2025-09-24 08:35:00.451] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:35:00.451] Read Success [2025-09-24 08:35:00.451] Verifying certificate... [2025-09-24 08:35:00.675] Verified OK [2025-09-24 08:35:00.691] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:35:02.183] Verified OK [2025-09-24 08:35:02.183] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:35:02.831] Verified OK [2025-09-24 08:35:02.831] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:35:05.661] fs.protected_hardlinks = 1 [2025-09-24 08:35:05.661] fs.protected_symlinks = 1 [2025-09-24 08:35:05.677] kernel.modules_disabled = 1 [2025-09-24 08:35:05.852] [2025-09-24 08:35:05.852] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:35:07.061] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:35:14.799] SBL1:1210.0.1.0 [2025-09-24 08:35:14.831] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:35:16.414] SBL2:1210.0.1.0 [2025-09-24 08:35:16.446] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:35:16.558] j-A [2025-09-24 08:35:23.896] The R5 Autosar Classic is running [2025-09-24 08:35:23.921] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:35:23.921] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:35:24.529] INIT: version 2.96 booting [2025-09-24 08:35:24.642] INIT: Entering runlevel: 5 [2025-09-24 08:35:24.801] mtd28 attached [2025-09-24 08:35:24.801] mtd24 attached [2025-09-24 08:35:24.818] mtd32 attached [2025-09-24 08:35:24.865] ubi0:animations is mounted. [2025-09-24 08:35:24.865] RTNETLINK answers: File exists [2025-09-24 08:35:24.930] ubi1:textures is mounted. [2025-09-24 08:35:24.930] ubi2:dml_code is mounted. [2025-09-24 08:35:24.930] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:35:24.930] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:35:24.930] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:35:24.930] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:35:24.930] data.LB_FadeInType0=100 [2025-09-24 08:35:24.930] data.CHLH_FadeInType0=0 [2025-09-24 08:35:24.930] data.WU_FadeInDelay=0 [2025-09-24 08:35:24.930] max_time_out=0 [2025-09-24 08:35:24.930] No splash screen [2025-09-24 08:35:24.930] stop dss Done [2025-09-24 08:35:24.930] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:35:24.997] /dev/mem opened. [2025-09-24 08:35:24.997] Memory mapped at address 0xffff8b9e7000. [2025-09-24 08:35:24.997] Read at address 0x00600018 (0xffff8b9e7018): 0x00000000 [2025-09-24 08:35:24.997] Write at address 0x00600018 (0xffff8b9e7018): 0x00400040, readback 0x00400040 [2025-09-24 08:35:24.997] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:35:25.020] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:35:25.180] Loaded PowerVR consumer services. [2025-09-24 08:35:25.212] 512+0 records in [2025-09-24 08:35:25.212] 512+0 records out [2025-09-24 08:35:25.244] Waiting data available... [2025-09-24 08:35:25.259] Starting syslogd/klogd: done [2025-09-24 08:35:25.276] DML Start [2025-09-24 08:35:25.436] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:35:25.644] DML res1: 0 [2025-09-24 08:35:26.197] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:35:26.197] Read Success [2025-09-24 08:35:26.197] Verifying certificate... [2025-09-24 08:35:26.453] Verified OK [2025-09-24 08:35:26.453] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:35:27.988] Verified OK [2025-09-24 08:35:27.988] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:35:28.595] Verified OK [2025-09-24 08:35:28.616] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:35:31.365] fs.protected_hardlinks = 1 [2025-09-24 08:35:31.394] fs.protected_symlinks = 1 [2025-09-24 08:35:31.394] kernel.modules_disabled = 1 [2025-09-24 08:35:31.585] [2025-09-24 08:35:31.585] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:35:32.788] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:35:40.493] SBL1:1210.0.1.0 [2025-09-24 08:35:40.525] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:35:42.108] SBL2:1210.0.1.0 [2025-09-24 08:35:42.139] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:35:42.235] j-A [2025-09-24 08:35:49.590] The R5 Autosar Classic is running [2025-09-24 08:35:49.615] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:35:49.615] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:35:50.223] INIT: version 2.96 booting [2025-09-24 08:35:50.334] INIT: Entering runlevel: 5 [2025-09-24 08:35:50.479] mtd28 attached [2025-09-24 08:35:50.495] mtd32 attached [2025-09-24 08:35:50.511] mtd24 attached [2025-09-24 08:35:50.569] ubi0:animations is mounted. [2025-09-24 08:35:50.569] RTNETLINK answers: File exists [2025-09-24 08:35:50.569] ubi1:dml_code is mounted. [2025-09-24 08:35:50.569] ubi2:textures is mounted. [2025-09-24 08:35:50.569] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:35:50.615] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:35:50.615] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:35:50.615] data.LB_FadeInType0=100 [2025-09-24 08:35:50.615] data.CHLH_FadeInType0=0 [2025-09-24 08:35:50.615] data.WU_FadeInDelay=0 [2025-09-24 08:35:50.615] max_time_out=0 [2025-09-24 08:35:50.615] No splash screen [2025-09-24 08:35:50.615] stop dss Done [2025-09-24 08:35:50.615] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:35:50.615] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:35:50.696] /dev/mem opened. [2025-09-24 08:35:50.696] Memory mapped at address 0xffff831e4000. [2025-09-24 08:35:50.696] Read at address 0x00600018 (0xffff831e4018): 0x00000000 [2025-09-24 08:35:50.696] Write at address 0x00600018 (0xffff831e4018): 0x00400040, readback 0x00400040 [2025-09-24 08:35:50.712] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:35:50.734] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:35:50.829] Loaded PowerVR consumer services. [2025-09-24 08:35:50.909] 512+0 records in [2025-09-24 08:35:50.909] 512+0 records out [2025-09-24 08:35:50.925] Waiting data available... [2025-09-24 08:35:50.957] Starting syslogd/klogd: done [2025-09-24 08:35:50.973] DML Start [2025-09-24 08:35:51.165] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:35:51.405] DML res1: 0 [2025-09-24 08:35:51.787] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:35:51.787] Read Success [2025-09-24 08:35:51.787] Verifying certificate... [2025-09-24 08:35:52.043] Verified OK [2025-09-24 08:35:52.059] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:35:53.730] Verified OK [2025-09-24 08:35:53.730] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:35:54.344] Verified OK [2025-09-24 08:35:54.344] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:35:57.077] fs.protected_hardlinks = 1 [2025-09-24 08:35:57.077] fs.protected_symlinks = 1 [2025-09-24 08:35:57.077] kernel.modules_disabled = 1 [2025-09-24 08:35:57.285] [2025-09-24 08:35:57.285] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:35:58.492] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:36:06.177] SBL1:1210.0.1.0 [2025-09-24 08:36:06.225] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:36:07.792] SBL2:1210.0.1.0 [2025-09-24 08:36:07.824] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:36:07.936] j-A [2025-09-24 08:36:15.309] The R5 Autosar Classic is running [2025-09-24 08:36:15.309] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:36:15.309] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:36:15.916] INIT: version 2.96 booting [2025-09-24 08:36:16.029] INIT: Entering runlevel: 5 [2025-09-24 08:36:16.173] mtd28 attached [2025-09-24 08:36:16.189] mtd24 attached [2025-09-24 08:36:16.189] mtd32 attached [2025-09-24 08:36:16.286] RTNETLINK answers: File exists [2025-09-24 08:36:16.286] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:36:16.286] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:36:16.286] ubi1:textures is mounted. [2025-09-24 08:36:16.286] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:36:16.286] ubi0:animations is mounted. [2025-09-24 08:36:16.286] ubi2:dml_code is mounted. [2025-09-24 08:36:16.286] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:36:16.286] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:36:16.317] data.LB_FadeInType0=100 [2025-09-24 08:36:16.317] data.CHLH_FadeInType0=0 [2025-09-24 08:36:16.317] data.WU_FadeInDelay=0 [2025-09-24 08:36:16.317] max_time_out=0 [2025-09-24 08:36:16.317] No splash screen [2025-09-24 08:36:16.317] stop dss Done [2025-09-24 08:36:16.348] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:36:16.348] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:36:16.381] /dev/mem opened. [2025-09-24 08:36:16.381] Memory mapped at address 0xffffb32a2000. [2025-09-24 08:36:16.381] Read at address 0x00600018 (0xffffb32a2018): 0x00000000 [2025-09-24 08:36:16.381] Write at address 0x00600018 (0xffffb32a2018): 0x00400040, readback 0x00400040 [2025-09-24 08:36:16.478] Loaded PowerVR consumer services. [2025-09-24 08:36:16.605] Waiting data available... [2025-09-24 08:36:16.621] 512+0 records in [2025-09-24 08:36:16.621] 512+0 records out [2025-09-24 08:36:16.653] Starting syslogd/klogd: done [2025-09-24 08:36:16.670] DML Start [2025-09-24 08:36:16.877] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:36:17.054] DML res1: 0 [2025-09-24 08:36:17.529] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:36:17.529] Read Success [2025-09-24 08:36:17.529] Verifying certificate... [2025-09-24 08:36:17.817] Verified OK [2025-09-24 08:36:17.833] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:36:19.554] Verified OK [2025-09-24 08:36:19.554] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:36:20.123] Verified OK [2025-09-24 08:36:20.123] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:36:22.712] fs.protected_hardlinks = 1 [2025-09-24 08:36:22.728] fs.protected_symlinks = 1 [2025-09-24 08:36:22.728] kernel.modules_disabled = 1 [2025-09-24 08:36:22.937] [2025-09-24 08:36:22.937] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:36:24.195] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:36:31.888] SBL1:1210.0.1.0 [2025-09-24 08:36:31.936] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:36:33.504] SBL2:1210.0.1.0 [2025-09-24 08:36:33.535] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:36:33.647] j-A [2025-09-24 08:36:41.020] The R5 Autosar Classic is running [2025-09-24 08:36:41.020] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:36:41.020] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:36:41.627] INIT: version 2.96 booting [2025-09-24 08:36:41.739] INIT: Entering runlevel: 5 [2025-09-24 08:36:41.900] mtd24 attached [2025-09-24 08:36:41.900] mtd28 attached [2025-09-24 08:36:41.916] mtd32 attached [2025-09-24 08:36:41.963] RTNETLINK answers: File exists [2025-09-24 08:36:42.025] ubi0:textures is mounted. [2025-09-24 08:36:42.025] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:36:42.025] ubi1:animations is mounted. [2025-09-24 08:36:42.025] ubi2:dml_code is mounted. [2025-09-24 08:36:42.025] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:36:42.025] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:36:42.025] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:36:42.025] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:36:42.025] data.LB_FadeInType0=100 [2025-09-24 08:36:42.025] data.CHLH_FadeInType0=0 [2025-09-24 08:36:42.025] data.WU_FadeInDelay=0 [2025-09-24 08:36:42.025] max_time_out=0 [2025-09-24 08:36:42.025] No splash screen [2025-09-24 08:36:42.025] stop dss Done [2025-09-24 08:36:42.102] /dev/mem opened. [2025-09-24 08:36:42.102] Memory mapped at address 0xffffb36c6000. [2025-09-24 08:36:42.102] Read at address 0x00600018 (0xffffb36c6018): 0x00000000 [2025-09-24 08:36:42.102] Write at address 0x00600018 (0xffffb36c6018): 0x00400040, readback 0x00400040 [2025-09-24 08:36:42.102] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:36:42.102] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:36:42.278] Loaded PowerVR consumer services. [2025-09-24 08:36:42.326] 512+0 records in [2025-09-24 08:36:42.326] 512+0 records out [2025-09-24 08:36:42.358] Waiting data available... [2025-09-24 08:36:42.374] Starting syslogd/klogd: done [2025-09-24 08:36:42.390] DML Start [2025-09-24 08:36:42.598] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:36:42.774] DML res1: 0 [2025-09-24 08:36:43.301] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:36:43.317] Read Success [2025-09-24 08:36:43.317] Verifying certificate... [2025-09-24 08:36:43.573] Verified OK [2025-09-24 08:36:43.589] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:36:45.100] Verified OK [2025-09-24 08:36:45.100] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:36:45.707] Verified OK [2025-09-24 08:36:45.707] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:36:48.410] fs.protected_hardlinks = 1 [2025-09-24 08:36:48.425] fs.protected_symlinks = 1 [2025-09-24 08:36:48.441] kernel.modules_disabled = 1 [2025-09-24 08:36:48.634] [2025-09-24 08:36:48.634] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:36:49.920] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:36:57.605] SBL1:1210.0.1.0 [2025-09-24 08:36:57.637] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:36:59.219] SBL2:1210.0.1.0 [2025-09-24 08:36:59.251] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:36:59.363] j-A [2025-09-24 08:37:06.701] The R5 Autosar Classic is running [2025-09-24 08:37:06.726] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:37:06.726] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:37:07.334] INIT: version 2.96 booting [2025-09-24 08:37:07.446] INIT: Entering runlevel: 5 [2025-09-24 08:37:07.590] mtd24 attached [2025-09-24 08:37:07.622] mtd32 attached [2025-09-24 08:37:07.622] mtd28 attached [2025-09-24 08:37:07.638] ubi0:textures is mounted. [2025-09-24 08:37:07.669] ubi1:dml_code is mounted. [2025-09-24 08:37:07.669] RTNETLINK answers: File exists [2025-09-24 08:37:07.729] ubi2:animations is mounted. [2025-09-24 08:37:07.729] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:37:07.729] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:37:07.729] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:37:07.729] data.LB_FadeInType0=100 [2025-09-24 08:37:07.729] data.CHLH_FadeInType0=0 [2025-09-24 08:37:07.729] data.WU_FadeInDelay=0 [2025-09-24 08:37:07.729] max_time_out=0 [2025-09-24 08:37:07.729] No splash screen [2025-09-24 08:37:07.729] stop dss Done [2025-09-24 08:37:07.729] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:37:07.729] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:37:07.803] /dev/mem opened. [2025-09-24 08:37:07.803] Memory mapped at address 0xffff88ad5000. [2025-09-24 08:37:07.803] Read at address 0x00600018 (0xffff88ad5018): 0x00000000 [2025-09-24 08:37:07.803] Write at address 0x00600018 (0xffff88ad5018): 0x00400040, readback 0x00400040 [2025-09-24 08:37:07.803] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:37:07.819] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:37:07.995] Loaded PowerVR consumer services. [2025-09-24 08:37:08.027] 512+0 records in [2025-09-24 08:37:08.027] 512+0 records out [2025-09-24 08:37:08.042] Starting syslogd/klogd: done [2025-09-24 08:37:08.106] Waiting data available... [2025-09-24 08:37:08.106] DML Start [2025-09-24 08:37:08.299] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:37:08.506] DML res1: 0 [2025-09-24 08:37:08.922] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:37:08.943] Read Success [2025-09-24 08:37:08.943] Verifying certificate... [2025-09-24 08:37:09.215] Verified OK [2025-09-24 08:37:09.231] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:37:10.862] Verified OK [2025-09-24 08:37:10.878] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:37:11.524] Verified OK [2025-09-24 08:37:11.524] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:37:14.210] fs.protected_hardlinks = 1 [2025-09-24 08:37:14.238] fs.protected_symlinks = 1 [2025-09-24 08:37:14.238] kernel.modules_disabled = 1 [2025-09-24 08:37:14.430] [2025-09-24 08:37:14.430] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:37:15.594] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:37:23.312] SBL1:1210.0.1.0 [2025-09-24 08:37:23.360] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:37:24.928] SBL2:1210.0.1.0 [2025-09-24 08:37:24.959] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:37:25.071] j-A [2025-09-24 08:37:32.445] The R5 Autosar Classic is running [2025-09-24 08:37:32.445] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:37:32.445] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:37:33.053] INIT: version 2.96 booting [2025-09-24 08:37:33.165] INIT: Entering runlevel: 5 [2025-09-24 08:37:33.325] mtd24 attached [2025-09-24 08:37:33.325] mtd28 attached [2025-09-24 08:37:33.341] mtd32 attached [2025-09-24 08:37:33.373] ubi0:textures is mounted. [2025-09-24 08:37:33.388] ubi1:animations is mounted. [2025-09-24 08:37:33.414] RTNETLINK answers: File exists [2025-09-24 08:37:33.414] ubi2:dml_code is mounted. [2025-09-24 08:37:33.414] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:37:33.446] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:37:33.446] data.LB_FadeInType0=100 [2025-09-24 08:37:33.446] data.CHLH_FadeInType0=0 [2025-09-24 08:37:33.446] data.WU_FadeInDelay=0 [2025-09-24 08:37:33.446] max_time_out=0 [2025-09-24 08:37:33.446] No splash screen [2025-09-24 08:37:33.446] stop dss Done [2025-09-24 08:37:33.446] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:37:33.446] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:37:33.462] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:37:33.478] /dev/mem opened. [2025-09-24 08:37:33.478] Memory mapped at address 0xffffb9552000. [2025-09-24 08:37:33.504] Read at address 0x00600018 (0xffffb9552018): 0x00000000 [2025-09-24 08:37:33.504] Write at address 0x00600018 (0xffffb9552018): 0x00400040, readback 0x00400040 [2025-09-24 08:37:33.536] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:37:33.552] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:37:33.696] Loaded PowerVR consumer services. [2025-09-24 08:37:33.744] 512+0 records in [2025-09-24 08:37:33.744] 512+0 records out [2025-09-24 08:37:33.760] Starting syslogd/klogd: done [2025-09-24 08:37:33.808] Waiting data available... [2025-09-24 08:37:33.824] DML Start [2025-09-24 08:37:34.000] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:37:34.223] DML res1: 0 [2025-09-24 08:37:34.650] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:37:34.650] Read Success [2025-09-24 08:37:34.650] Verifying certificate... [2025-09-24 08:37:34.938] Verified OK [2025-09-24 08:37:34.955] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:37:36.674] Verified OK [2025-09-24 08:37:36.674] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:37:37.328] Verified OK [2025-09-24 08:37:37.328] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:37:39.968] fs.protected_hardlinks = 1 [2025-09-24 08:37:39.968] fs.protected_symlinks = 1 [2025-09-24 08:37:39.983] kernel.modules_disabled = 1 [2025-09-24 08:37:40.175] [2025-09-24 08:37:40.175] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:37:41.343] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:37:49.007] SBL1:1210.0.1.0 [2025-09-24 08:37:49.055] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:37:50.622] SBL2:1210.0.1.0 [2025-09-24 08:37:50.654] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:37:50.766] j-A [2025-09-24 08:37:58.120] The R5 Autosar Classic is running [2025-09-24 08:37:58.120] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:37:58.141] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:37:58.748] INIT: version 2.96 booting [2025-09-24 08:37:58.861] INIT: Entering runlevel: 5 [2025-09-24 08:37:59.005] mtd24 attached [2025-09-24 08:37:59.021] mtd32 attached [2025-09-24 08:37:59.036] mtd28 attached [2025-09-24 08:37:59.052] ubi0:textures is mounted. [2025-09-24 08:37:59.084] RTNETLINK answers: File exists [2025-09-24 08:37:59.084] ubi1:dml_code is mounted. [2025-09-24 08:37:59.134] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:37:59.134] ubi2:animations is mounted. [2025-09-24 08:37:59.134] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:37:59.134] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:37:59.134] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:37:59.134] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:37:59.134] data.LB_FadeInType0=100 [2025-09-24 08:37:59.134] data.CHLH_FadeInType0=0 [2025-09-24 08:37:59.134] data.WU_FadeInDelay=0 [2025-09-24 08:37:59.134] max_time_out=0 [2025-09-24 08:37:59.134] No splash screen [2025-09-24 08:37:59.134] stop dss Done [2025-09-24 08:37:59.166] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:37:59.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:37:59.203] /dev/mem opened. [2025-09-24 08:37:59.203] Memory mapped at address 0xffffb04fd000. [2025-09-24 08:37:59.203] Read at address 0x00600018 (0xffffb04fd018): 0x00000000 [2025-09-24 08:37:59.203] Write at address 0x00600018 (0xffffb04fd018): 0x00400040, readback 0x00400040 [2025-09-24 08:37:59.348] Loaded PowerVR consumer services. [2025-09-24 08:37:59.443] Waiting data available... [2025-09-24 08:37:59.443] 512+0 records in [2025-09-24 08:37:59.443] 512+0 records out [2025-09-24 08:37:59.491] Starting syslogd/klogd: done [2025-09-24 08:37:59.507] DML Start [2025-09-24 08:37:59.683] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:37:59.907] DML res1: 0 [2025-09-24 08:38:00.331] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:38:00.331] Read Success [2025-09-24 08:38:00.331] Verifying certificate... [2025-09-24 08:38:00.555] Verified OK [2025-09-24 08:38:00.571] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:38:02.180] Verified OK [2025-09-24 08:38:02.180] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:38:02.768] Verified OK [2025-09-24 08:38:02.768] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:38:05.326] fs.protected_hardlinks = 1 [2025-09-24 08:38:05.356] fs.protected_symlinks = 1 [2025-09-24 08:38:05.356] kernel.modules_disabled = 1 [2025-09-24 08:38:05.532] [2025-09-24 08:38:05.532] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:38:07.026] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:38:14.708] SBL1:1210.0.1.0 [2025-09-24 08:38:14.756] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:38:16.323] SBL2:1210.0.1.0 [2025-09-24 08:38:16.371] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:38:16.468] j-A [2025-09-24 08:38:23.821] The R5 Autosar Classic is running [2025-09-24 08:38:23.845] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:38:23.845] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:38:24.452] INIT: version 2.96 booting [2025-09-24 08:38:24.564] INIT: Entering runlevel: 5 [2025-09-24 08:38:24.708] mtd28 attached [2025-09-24 08:38:24.724] mtd24 attached [2025-09-24 08:38:24.740] mtd32 attached [2025-09-24 08:38:24.772] ubi0:animations is mounted. [2025-09-24 08:38:24.788] ubi1:textures is mounted. [2025-09-24 08:38:24.845] RTNETLINK answers: File exists [2025-09-24 08:38:24.845] ubi2:dml_code is mounted. [2025-09-24 08:38:24.845] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:38:24.845] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:38:24.845] data.LB_FadeInType0=100 [2025-09-24 08:38:24.845] data.CHLH_FadeInType0=0 [2025-09-24 08:38:24.845] data.WU_FadeInDelay=0 [2025-09-24 08:38:24.845] max_time_out=0 [2025-09-24 08:38:24.845] No splash screen [2025-09-24 08:38:24.845] stop dss Done [2025-09-24 08:38:24.845] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:38:24.845] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:38:24.845] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:38:24.900] /dev/mem opened. [2025-09-24 08:38:24.900] Memory mapped at address 0xffffafa7c000. [2025-09-24 08:38:24.900] Read at address 0x00600018 (0xffffafa7c018): 0x00000000 [2025-09-24 08:38:24.900] Write at address 0x00600018 (0xffffafa7c018): 0x00400040, readback 0x00400040 [2025-09-24 08:38:24.900] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:38:24.916] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:38:25.012] Loaded PowerVR consumer services. [2025-09-24 08:38:25.167] 512+0 records in [2025-09-24 08:38:25.167] 512+0 records out [2025-09-24 08:38:25.167] Waiting data available... [2025-09-24 08:38:25.199] Starting syslogd/klogd: done [2025-09-24 08:38:25.215] DML Start [2025-09-24 08:38:25.390] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:38:25.598] DML res1: 0 [2025-09-24 08:38:26.094] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:38:26.116] Read Success [2025-09-24 08:38:26.116] Verifying certificate... [2025-09-24 08:38:26.355] Verified OK [2025-09-24 08:38:26.371] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:38:28.001] Verified OK [2025-09-24 08:38:28.001] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:38:28.550] Verified OK [2025-09-24 08:38:28.550] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:38:31.093] fs.protected_hardlinks = 1 [2025-09-24 08:38:31.093] fs.protected_symlinks = 1 [2025-09-24 08:38:31.109] kernel.modules_disabled = 1 [2025-09-24 08:38:31.284] [2025-09-24 08:38:31.284] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:38:32.718] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:38:40.427] SBL1:1210.0.1.0 [2025-09-24 08:38:40.475] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:38:42.042] SBL2:1210.0.1.0 [2025-09-24 08:38:42.074] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:38:42.186] j-A [2025-09-24 08:38:49.559] The R5 Autosar Classic is running [2025-09-24 08:38:49.559] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:38:49.559] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:38:50.167] INIT: version 2.96 booting [2025-09-24 08:38:50.278] INIT: Entering runlevel: 5 [2025-09-24 08:38:50.422] mtd28 attached [2025-09-24 08:38:50.438] mtd32 attached [2025-09-24 08:38:50.454] mtd24 attached [2025-09-24 08:38:50.557] RTNETLINK answers: File exists [2025-09-24 08:38:50.557] ubi1:dml_code is mounted. [2025-09-24 08:38:50.557] ubi0:animations is mounted. [2025-09-24 08:38:50.557] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:38:50.557] ubi2:textures is mounted. [2025-09-24 08:38:50.557] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:38:50.557] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:38:50.557] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:38:50.557] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:38:50.557] data.LB_FadeInType0=100 [2025-09-24 08:38:50.557] data.CHLH_FadeInType0=0 [2025-09-24 08:38:50.557] data.WU_FadeInDelay=0 [2025-09-24 08:38:50.557] max_time_out=0 [2025-09-24 08:38:50.557] No splash screen [2025-09-24 08:38:50.557] stop dss Done [2025-09-24 08:38:50.604] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:38:50.645] /dev/mem opened. [2025-09-24 08:38:50.645] Memory mapped at address 0xffffb053d000. [2025-09-24 08:38:50.645] Read at address 0x00600018 (0xffffb053d018): 0x00000000 [2025-09-24 08:38:50.645] Write at address 0x00600018 (0xffffb053d018): 0x00400040, readback 0x00400040 [2025-09-24 08:38:50.645] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:38:50.709] Loaded PowerVR consumer services. [2025-09-24 08:38:50.853] 512+0 records in [2025-09-24 08:38:50.869] 512+0 records out [2025-09-24 08:38:50.869] Waiting data available... [2025-09-24 08:38:50.901] Starting syslogd/klogd: done [2025-09-24 08:38:50.917] DML Start [2025-09-24 08:38:51.093] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:38:51.365] DML res1: 0 [2025-09-24 08:38:51.765] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:38:51.786] Read Success [2025-09-24 08:38:51.786] Verifying certificate... [2025-09-24 08:38:52.041] Verified OK [2025-09-24 08:38:52.058] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:38:53.832] Verified OK [2025-09-24 08:38:53.832] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:38:54.357] Verified OK [2025-09-24 08:38:54.357] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:38:56.835] fs.protected_hardlinks = 1 [2025-09-24 08:38:56.835] fs.protected_symlinks = 1 [2025-09-24 08:38:56.851] kernel.modules_disabled = 1 [2025-09-24 08:38:57.027] [2025-09-24 08:38:57.027] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:38:58.445] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:39:06.145] SBL1:1210.0.1.0 [2025-09-24 08:39:06.176] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:39:07.759] SBL2:1210.0.1.0 [2025-09-24 08:39:07.791] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:39:07.903] j-A [2025-09-24 08:39:15.273] The R5 Autosar Classic is running [2025-09-24 08:39:15.273] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:39:15.273] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:39:15.880] INIT: version 2.96 booting [2025-09-24 08:39:15.992] INIT: Entering runlevel: 5 [2025-09-24 08:39:16.136] mtd24 attached [2025-09-24 08:39:16.152] mtd28 attached [2025-09-24 08:39:16.168] mtd32 attached [2025-09-24 08:39:16.200] ubi0:textures is mounted. [2025-09-24 08:39:16.251] RTNETLINK answers: File exists [2025-09-24 08:39:16.251] ubi1:animations is mounted. [2025-09-24 08:39:16.251] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:39:16.251] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:39:16.251] ubi2:dml_code is mounted. [2025-09-24 08:39:16.251] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:39:16.251] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:39:16.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:39:16.272] data.LB_FadeInType0=100 [2025-09-24 08:39:16.272] data.CHLH_FadeInType0=0 [2025-09-24 08:39:16.272] data.WU_FadeInDelay=0 [2025-09-24 08:39:16.272] max_time_out=0 [2025-09-24 08:39:16.272] No splash screen [2025-09-24 08:39:16.272] stop dss Done [2025-09-24 08:39:16.288] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:39:16.288] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:39:16.341] /dev/mem opened. [2025-09-24 08:39:16.341] Memory mapped at address 0xffffb28a8000. [2025-09-24 08:39:16.341] Read at address 0x00600018 (0xffffb28a8018): 0x00000000 [2025-09-24 08:39:16.341] Write at address 0x00600018 (0xffffb28a8018): 0x00400040, readback 0x00400040 [2025-09-24 08:39:16.532] Loaded PowerVR consumer services. [2025-09-24 08:39:16.579] Waiting data available... [2025-09-24 08:39:16.579] 512+0 records in [2025-09-24 08:39:16.579] 512+0 records out [2025-09-24 08:39:16.612] Starting syslogd/klogd: done [2025-09-24 08:39:16.628] DML Start [2025-09-24 08:39:16.771] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:39:17.011] DML res1: 0 [2025-09-24 08:39:17.498] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:39:17.498] Read Success [2025-09-24 08:39:17.498] Verifying certificate... [2025-09-24 08:39:17.769] Verified OK [2025-09-24 08:39:17.785] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:39:19.504] Verified OK [2025-09-24 08:39:19.504] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:39:20.136] Verified OK [2025-09-24 08:39:20.136] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:39:22.679] fs.protected_hardlinks = 1 [2025-09-24 08:39:22.695] fs.protected_symlinks = 1 [2025-09-24 08:39:22.695] kernel.modules_disabled = 1 [2025-09-24 08:39:22.902] [2025-09-24 08:39:22.902] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:39:24.118] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:39:31.856] SBL1:1210.0.1.0 [2025-09-24 08:39:31.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:39:33.470] SBL2:1210.0.1.0 [2025-09-24 08:39:33.502] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:39:33.614] j-A [2025-09-24 08:39:40.989] The R5 Autosar Classic is running [2025-09-24 08:39:40.989] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:39:40.989] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:39:41.596] INIT: version 2.96 booting [2025-09-24 08:39:41.709] INIT: Entering runlevel: 5 [2025-09-24 08:39:41.852] mtd24 attached [2025-09-24 08:39:41.868] mtd28 attached [2025-09-24 08:39:41.884] mtd32 attached [2025-09-24 08:39:41.932] ubi0:textures is mounted. [2025-09-24 08:39:41.932] RTNETLINK answers: File exists [2025-09-24 08:39:42.000] ubi1:animations is mounted. [2025-09-24 08:39:42.000] ubi2:dml_code is mounted. [2025-09-24 08:39:42.000] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:39:42.000] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:39:42.000] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:39:42.000] data.LB_FadeInType0=100 [2025-09-24 08:39:42.000] data.CHLH_FadeInType0=0 [2025-09-24 08:39:42.000] data.WU_FadeInDelay=0 [2025-09-24 08:39:42.000] max_time_out=0 [2025-09-24 08:39:42.000] No splash screen [2025-09-24 08:39:42.000] stop dss Done [2025-09-24 08:39:42.000] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:39:42.000] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:39:42.065] /dev/mem opened. [2025-09-24 08:39:42.065] Memory mapped at address 0xffff9b5ee000. [2025-09-24 08:39:42.065] Read at address 0x00600018 (0xffff9b5ee018): 0x00000000 [2025-09-24 08:39:42.065] Write at address 0x00600018 (0xffff9b5ee018): 0x00400040, readback 0x00400040 [2025-09-24 08:39:42.081] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:39:42.097] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:39:42.193] Loaded PowerVR consumer services. [2025-09-24 08:39:42.320] Waiting data available... [2025-09-24 08:39:42.320] 512+0 records in [2025-09-24 08:39:42.320] 512+0 records out [2025-09-24 08:39:42.352] Starting syslogd/klogd: done [2025-09-24 08:39:42.368] DML Start [2025-09-24 08:39:42.559] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:39:42.783] DML res1: 0 [2025-09-24 08:39:43.215] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:39:43.232] Read Success [2025-09-24 08:39:43.232] Verifying certificate... [2025-09-24 08:39:43.487] Verified OK [2025-09-24 08:39:43.502] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:39:45.150] Verified OK [2025-09-24 08:39:45.150] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:39:45.787] Verified OK [2025-09-24 08:39:45.787] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:39:48.473] fs.protected_hardlinks = 1 [2025-09-24 08:39:48.473] fs.protected_symlinks = 1 [2025-09-24 08:39:48.489] kernel.modules_disabled = 1 [2025-09-24 08:39:48.697] [2025-09-24 08:39:48.697] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:39:49.878] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:39:57.565] SBL1:1210.0.1.0 [2025-09-24 08:39:57.597] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:39:59.181] SBL2:1210.0.1.0 [2025-09-24 08:39:59.213] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:39:59.325] j-A [2025-09-24 08:40:06.662] The R5 Autosar Classic is running [2025-09-24 08:40:06.694] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:40:06.694] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:40:07.302] INIT: version 2.96 booting [2025-09-24 08:40:07.413] INIT: Entering runlevel: 5 [2025-09-24 08:40:07.557] mtd24 attached [2025-09-24 08:40:07.573] mtd32 attached [2025-09-24 08:40:07.589] mtd28 attached [2025-09-24 08:40:07.621] ubi0:textures is mounted. [2025-09-24 08:40:07.637] RTNETLINK answers: File exists [2025-09-24 08:40:07.637] ubi1:dml_code is mounted. [2025-09-24 08:40:07.697] ubi2:animations is mounted. [2025-09-24 08:40:07.697] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:40:07.697] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:40:07.697] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:40:07.697] data.LB_FadeInType0=100 [2025-09-24 08:40:07.697] data.CHLH_FadeInType0=0 [2025-09-24 08:40:07.697] data.WU_FadeInDelay=0 [2025-09-24 08:40:07.697] max_time_out=0 [2025-09-24 08:40:07.697] No splash screen [2025-09-24 08:40:07.697] stop dss Done [2025-09-24 08:40:07.697] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:40:07.697] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:40:07.745] /dev/mem opened. [2025-09-24 08:40:07.745] Memory mapped at address 0xffff9f857000. [2025-09-24 08:40:07.771] Read at address 0x00600018 (0xffff9f857018): 0x00000000 [2025-09-24 08:40:07.771] Write at address 0x00600018 (0xffff9f857018): 0x00400040, readback 0x00400040 [2025-09-24 08:40:07.771] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:40:07.795] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:40:07.859] Loaded PowerVR consumer services. [2025-09-24 08:40:07.986] 512+0 records in [2025-09-24 08:40:07.986] 512+0 records out [2025-09-24 08:40:08.018] Starting syslogd/klogd: Waiting data available... [2025-09-24 08:40:08.034] done [2025-09-24 08:40:08.034] DML Start [2025-09-24 08:40:08.243] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:40:08.450] DML res1: 0 [2025-09-24 08:40:08.896] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:40:08.896] Read Success [2025-09-24 08:40:08.896] Verifying certificate... [2025-09-24 08:40:09.136] Verified OK [2025-09-24 08:40:09.152] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:40:10.724] Verified OK [2025-09-24 08:40:10.724] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:40:11.300] Verified OK [2025-09-24 08:40:11.300] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:40:14.050] fs.protected_hardlinks = 1 [2025-09-24 08:40:14.050] fs.protected_symlinks = 1 [2025-09-24 08:40:14.065] kernel.modules_disabled = 1 [2025-09-24 08:40:14.257] [2025-09-24 08:40:14.257] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:40:15.526] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:40:23.263] SBL1:1210.0.1.0 [2025-09-24 08:40:23.311] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:40:24.877] SBL2:1210.0.1.0 [2025-09-24 08:40:24.909] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:40:25.022] j-A [2025-09-24 08:40:32.395] The R5 Autosar Classic is running [2025-09-24 08:40:32.395] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:40:32.395] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:40:33.002] INIT: version 2.96 booting [2025-09-24 08:40:33.114] INIT: Entering runlevel: 5 [2025-09-24 08:40:33.274] mtd24 attached [2025-09-24 08:40:33.290] mtd28 attached [2025-09-24 08:40:33.352] mtd32 attached [2025-09-24 08:40:33.352] ubi0:textures is mounted. [2025-09-24 08:40:33.352] ubi1:animations is mounted. [2025-09-24 08:40:33.352] RTNETLINK answers: File exists [2025-09-24 08:40:33.386] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:40:33.386] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:40:33.386] ubi2:dml_code is mounted. [2025-09-24 08:40:33.386] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:40:33.386] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:40:33.386] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:40:33.413] data.LB_FadeInType0=100 [2025-09-24 08:40:33.413] data.CHLH_FadeInType0=0 [2025-09-24 08:40:33.413] data.WU_FadeInDelay=0 [2025-09-24 08:40:33.413] max_time_out=0 [2025-09-24 08:40:33.413] No splash screen [2025-09-24 08:40:33.413] stop dss Done [2025-09-24 08:40:33.453] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:40:33.453] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:40:33.485] /dev/mem opened. [2025-09-24 08:40:33.485] Memory mapped at address 0xffff9c02a000. [2025-09-24 08:40:33.485] Read at address 0x00600018 (0xffff9c02a018): 0x00000000 [2025-09-24 08:40:33.485] Write at address 0x00600018 (0xffff9c02a018): 0x00400040, readback 0x00400040 [2025-09-24 08:40:33.580] Loaded PowerVR consumer services. [2025-09-24 08:40:33.721] Waiting data available... [2025-09-24 08:40:33.721] 512+0 records in [2025-09-24 08:40:33.721] 512+0 records out [2025-09-24 08:40:33.737] Starting syslogd/klogd: done [2025-09-24 08:40:33.753] DML Start [2025-09-24 08:40:33.928] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:40:34.152] DML res1: 0 [2025-09-24 08:40:34.601] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:40:34.601] Read Success [2025-09-24 08:40:34.616] Verifying certificate... [2025-09-24 08:40:34.888] Verified OK [2025-09-24 08:40:34.903] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:40:36.359] Verified OK [2025-09-24 08:40:36.375] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:40:37.009] Verified OK [2025-09-24 08:40:37.009] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:40:39.790] fs.protected_hardlinks = 1 [2025-09-24 08:40:39.821] fs.protected_symlinks = 1 [2025-09-24 08:40:39.821] kernel.modules_disabled = 1 [2025-09-24 08:40:39.996] [2025-09-24 08:40:39.996] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:40:41.289] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:40:48.970] SBL1:1210.0.1.0 [2025-09-24 08:40:49.018] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:40:50.584] SBL2:1210.0.1.0 [2025-09-24 08:40:50.616] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:40:50.729] j-A [2025-09-24 08:40:58.105] The R5 Autosar Classic is running [2025-09-24 08:40:58.105] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:40:58.105] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:40:58.712] INIT: version 2.96 booting [2025-09-24 08:40:58.823] INIT: Entering runlevel: 5 [2025-09-24 08:40:58.984] mtd24 attached [2025-09-24 08:40:58.984] mtd28 attached [2025-09-24 08:40:59.016] mtd32 attached [2025-09-24 08:40:59.032] ubi0:textures is mounted. [2025-09-24 08:40:59.048] RTNETLINK answers: File exists [2025-09-24 08:40:59.048] ubi1:animations is mounted. [2025-09-24 08:40:59.107] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:40:59.107] ubi2:dml_code is mounted. [2025-09-24 08:40:59.107] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:40:59.107] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:40:59.107] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:40:59.107] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:40:59.107] data.LB_FadeInType0=100 [2025-09-24 08:40:59.107] data.CHLH_FadeInType0=0 [2025-09-24 08:40:59.107] data.WU_FadeInDelay=0 [2025-09-24 08:40:59.107] max_time_out=0 [2025-09-24 08:40:59.107] No splash screen [2025-09-24 08:40:59.107] stop dss Done [2025-09-24 08:40:59.189] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:40:59.189] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:40:59.189] /dev/mem opened. [2025-09-24 08:40:59.189] Memory mapped at address 0xffff94d10000. [2025-09-24 08:40:59.189] Read at address 0x00600018 (0xffff94d10018): 0x00000000 [2025-09-24 08:40:59.189] Write at address 0x00600018 (0xffff94d10018): 0x00400040, readback 0x00400040 [2025-09-24 08:40:59.349] Loaded PowerVR consumer services. [2025-09-24 08:40:59.396] 512+0 records in [2025-09-24 08:40:59.396] 512+0 records out [2025-09-24 08:40:59.444] Waiting data available... [2025-09-24 08:40:59.444] Starting syslogd/klogd: done [2025-09-24 08:40:59.460] DML Start [2025-09-24 08:40:59.636] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:40:59.876] DML res1: 0 [2025-09-24 08:41:00.339] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:41:00.356] Read Success [2025-09-24 08:41:00.356] Verifying certificate... [2025-09-24 08:41:00.627] Verified OK [2025-09-24 08:41:00.643] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:41:02.427] Verified OK [2025-09-24 08:41:02.427] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:41:03.025] Verified OK [2025-09-24 08:41:03.025] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:41:05.486] fs.protected_hardlinks = 1 [2025-09-24 08:41:05.486] fs.protected_symlinks = 1 [2025-09-24 08:41:05.486] kernel.modules_disabled = 1 [2025-09-24 08:41:05.694] [2025-09-24 08:41:05.694] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:41:06.940] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:41:14.670] SBL1:1210.0.1.0 [2025-09-24 08:41:14.717] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:41:16.284] SBL2:1210.0.1.0 [2025-09-24 08:41:16.316] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:41:16.429] j-A [2025-09-24 08:41:23.783] The R5 Autosar Classic is running [2025-09-24 08:41:23.783] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:41:23.805] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:41:24.412] INIT: version 2.96 booting [2025-09-24 08:41:24.524] INIT: Entering runlevel: 5 [2025-09-24 08:41:24.668] mtd24 attached [2025-09-24 08:41:24.684] mtd28 attached [2025-09-24 08:41:24.700] mtd32 attached [2025-09-24 08:41:24.732] ubi0:textures is mounted. [2025-09-24 08:41:24.748] RTNETLINK answers: File exists [2025-09-24 08:41:24.775] ubi1:animations is mounted. [2025-09-24 08:41:24.775] ubi2:dml_code is mounted. [2025-09-24 08:41:24.775] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:41:24.775] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:41:24.815] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:41:24.815] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:41:24.815] data.LB_FadeInType0=100 [2025-09-24 08:41:24.815] data.CHLH_FadeInType0=0 [2025-09-24 08:41:24.815] data.WU_FadeInDelay=0 [2025-09-24 08:41:24.815] max_time_out=0 [2025-09-24 08:41:24.815] No splash screen [2025-09-24 08:41:24.815] stop dss Done [2025-09-24 08:41:24.815] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:41:24.848] /dev/mem opened. [2025-09-24 08:41:24.848] Memory mapped at address 0xffffacbe9000. [2025-09-24 08:41:24.874] Read at address 0x00600018 (0xffffacbe9018): 0x00000000 [2025-09-24 08:41:24.874] Write at address 0x00600018 (0xffffacbe9018): 0x00400040, readback 0x00400040 [2025-09-24 08:41:24.906] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:41:24.922] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:41:25.081] Loaded PowerVR consumer services. [2025-09-24 08:41:25.113] Waiting data available... [2025-09-24 08:41:25.129] 512+0 records in [2025-09-24 08:41:25.129] 512+0 records out [2025-09-24 08:41:25.161] Starting syslogd/klogd: done [2025-09-24 08:41:25.178] DML Start [2025-09-24 08:41:25.337] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:41:25.561] DML res1: 0 [2025-09-24 08:41:26.051] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:41:26.051] Read Success [2025-09-24 08:41:26.051] Verifying certificate... [2025-09-24 08:41:26.274] Verified OK [2025-09-24 08:41:26.290] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:41:28.006] Verified OK [2025-09-24 08:41:28.006] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:41:28.606] Verified OK [2025-09-24 08:41:28.606] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:41:31.195] fs.protected_hardlinks = 1 [2025-09-24 08:41:31.195] fs.protected_symlinks = 1 [2025-09-24 08:41:31.212] kernel.modules_disabled = 1 [2025-09-24 08:41:31.403] [2025-09-24 08:41:31.403] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:41:32.697] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:41:40.401] SBL1:1210.0.1.0 [2025-09-24 08:41:40.432] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:41:42.015] SBL2:1210.0.1.0 [2025-09-24 08:41:42.046] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:41:42.159] j-A [2025-09-24 08:41:49.498] The R5 Autosar Classic is running [2025-09-24 08:41:49.529] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:41:49.529] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:41:50.137] INIT: version 2.96 booting [2025-09-24 08:41:50.248] INIT: Entering runlevel: 5 [2025-09-24 08:41:50.393] mtd24 attached [2025-09-24 08:41:50.408] mtd28 attached [2025-09-24 08:41:50.440] ubi0:textures is mounted. [2025-09-24 08:41:50.440] mtd32 attached [2025-09-24 08:41:50.456] ubi1:animations is mounted. [2025-09-24 08:41:50.472] RTNETLINK answers: File exists [2025-09-24 08:41:50.533] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:41:50.533] ubi2:dml_code is mounted. [2025-09-24 08:41:50.533] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:41:50.533] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:41:50.533] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:41:50.533] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:41:50.533] data.LB_FadeInType0=100 [2025-09-24 08:41:50.533] data.CHLH_FadeInType0=0 [2025-09-24 08:41:50.533] data.WU_FadeInDelay=0 [2025-09-24 08:41:50.533] max_time_out=0 [2025-09-24 08:41:50.533] No splash screen [2025-09-24 08:41:50.533] stop dss Done [2025-09-24 08:41:50.622] /dev/mem opened. [2025-09-24 08:41:50.622] Memory mapped at address 0xffffaed44000. [2025-09-24 08:41:50.622] Read at address 0x00600018 (0xffffaed44018): 0x00000000 [2025-09-24 08:41:50.622] Write at address 0x00600018 (0xffffaed44018): 0x00400040, readback 0x00400040 [2025-09-24 08:41:50.622] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:41:50.622] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:41:50.781] Loaded PowerVR consumer services. [2025-09-24 08:41:50.813] 512+0 records in [2025-09-24 08:41:50.813] 512+0 records out [2025-09-24 08:41:50.845] Starting syslogd/klogd: done [2025-09-24 08:41:50.877] Waiting data available... [2025-09-24 08:41:50.877] DML Start [2025-09-24 08:41:51.037] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:41:51.260] DML res1: 0 [2025-09-24 08:41:51.739] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:41:51.739] Read Success [2025-09-24 08:41:51.739] Verifying certificate... [2025-09-24 08:41:51.962] Verified OK [2025-09-24 08:41:51.978] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:41:53.569] Verified OK [2025-09-24 08:41:53.569] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:41:54.161] Verified OK [2025-09-24 08:41:54.161] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:41:56.990] fs.protected_hardlinks = 1 [2025-09-24 08:41:57.006] fs.protected_symlinks = 1 [2025-09-24 08:41:57.006] kernel.modules_disabled = 1 [2025-09-24 08:41:57.214] [2025-09-24 08:41:57.214] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:41:58.396] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:42:06.108] SBL1:1210.0.1.0 [2025-09-24 08:42:06.140] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:42:07.723] SBL2:1210.0.1.0 [2025-09-24 08:42:07.755] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:42:07.867] j-A [2025-09-24 08:42:15.237] The R5 Autosar Classic is running [2025-09-24 08:42:15.237] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:42:15.237] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:42:15.845] INIT: version 2.96 booting [2025-09-24 08:42:15.956] INIT: Entering runlevel: 5 [2025-09-24 08:42:16.116] mtd32 attached [2025-09-24 08:42:16.116] mtd28 attached [2025-09-24 08:42:16.132] mtd24 attached [2025-09-24 08:42:16.180] RTNETLINK answers: File exists [2025-09-24 08:42:16.242] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:42:16.242] ubi2:textures is mounted. [2025-09-24 08:42:16.242] ubi0:dml_code is mounted. [2025-09-24 08:42:16.242] ubi1:animations is mounted. [2025-09-24 08:42:16.242] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:42:16.242] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:42:16.242] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:42:16.242] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:42:16.242] data.LB_FadeInType0=100 [2025-09-24 08:42:16.242] data.CHLH_FadeInType0=0 [2025-09-24 08:42:16.242] data.WU_FadeInDelay=0 [2025-09-24 08:42:16.242] max_time_out=0 [2025-09-24 08:42:16.242] No splash screen [2025-09-24 08:42:16.242] stop dss Done [2025-09-24 08:42:16.313] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:42:16.313] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:42:16.313] /dev/mem opened. [2025-09-24 08:42:16.313] Memory mapped at address 0xffff89ff5000. [2025-09-24 08:42:16.313] Read at address 0x00600018 (0xffff89ff5018): 0x00000000 [2025-09-24 08:42:16.313] Write at address 0x00600018 (0xffff89ff5018): 0x00400040, readback 0x00400040 [2025-09-24 08:42:16.425] Loaded PowerVR consumer services. [2025-09-24 08:42:16.537] 512+0 records in [2025-09-24 08:42:16.537] 512+0 records out [2025-09-24 08:42:16.553] Waiting data available... [2025-09-24 08:42:16.585] Starting syslogd/klogd: done [2025-09-24 08:42:16.601] DML Start [2025-09-24 08:42:16.745] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:42:16.936] DML res1: 0 [2025-09-24 08:42:17.480] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:42:17.501] Read Success [2025-09-24 08:42:17.501] Verifying certificate... [2025-09-24 08:42:17.725] Verified OK [2025-09-24 08:42:17.741] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:42:19.420] Verified OK [2025-09-24 08:42:19.420] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:42:20.059] Verified OK [2025-09-24 08:42:20.059] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:42:22.586] fs.protected_hardlinks = 1 [2025-09-24 08:42:22.601] fs.protected_symlinks = 1 [2025-09-24 08:42:22.601] kernel.modules_disabled = 1 [2025-09-24 08:42:22.808] [2025-09-24 08:42:22.808] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:42:24.094] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:42:31.818] SBL1:1210.0.1.0 [2025-09-24 08:42:31.849] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:42:33.432] SBL2:1210.0.1.0 [2025-09-24 08:42:33.464] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:42:33.576] j-A [2025-09-24 08:42:40.946] The R5 Autosar Classic is running [2025-09-24 08:42:40.946] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:42:40.946] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:42:41.553] INIT: version 2.96 booting [2025-09-24 08:42:41.666] INIT: Entering runlevel: 5 [2025-09-24 08:42:41.809] mtd24 attached [2025-09-24 08:42:41.825] mtd28 attached [2025-09-24 08:42:41.841] mtd32 attached [2025-09-24 08:42:41.857] ubi0:textures is mounted. [2025-09-24 08:42:41.873] ubi1:animations is mounted. [2025-09-24 08:42:41.889] RTNETLINK answers: File exists [2025-09-24 08:42:41.889] ubi2:dml_code is mounted. [2025-09-24 08:42:41.942] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:42:41.942] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:42:41.942] data.LB_FadeInType0=100 [2025-09-24 08:42:41.942] data.CHLH_FadeInType0=0 [2025-09-24 08:42:41.942] data.WU_FadeInDelay=0 [2025-09-24 08:42:41.942] max_time_out=0 [2025-09-24 08:42:41.942] No splash screen [2025-09-24 08:42:41.942] stop dss Done [2025-09-24 08:42:41.942] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:42:41.942] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:42:41.958] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:42:41.995] /dev/mem opened. [2025-09-24 08:42:41.995] Memory mapped at address 0xffff891bd000. [2025-09-24 08:42:41.995] Read at address 0x00600018 (0xffff891bd018): 0x00000000 [2025-09-24 08:42:41.995] Write at address 0x00600018 (0xffff891bd018): 0x00400040, readback 0x00400040 [2025-09-24 08:42:42.043] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:42:42.066] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:42:42.129] Loaded PowerVR consumer services. [2025-09-24 08:42:42.242] 512+0 records in [2025-09-24 08:42:42.242] 512+0 records out [2025-09-24 08:42:42.258] Waiting data available... [2025-09-24 08:42:42.273] Starting syslogd/klogd: done [2025-09-24 08:42:42.289] DML Start [2025-09-24 08:42:42.466] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:42:42.689] DML res1: 0 [2025-09-24 08:42:43.181] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:42:43.181] Read Success [2025-09-24 08:42:43.181] Verifying certificate... [2025-09-24 08:42:43.437] Verified OK [2025-09-24 08:42:43.453] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:42:45.105] Verified OK [2025-09-24 08:42:45.105] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:42:45.696] Verified OK [2025-09-24 08:42:45.696] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:42:48.367] fs.protected_hardlinks = 1 [2025-09-24 08:42:48.383] fs.protected_symlinks = 1 [2025-09-24 08:42:48.399] kernel.modules_disabled = 1 [2025-09-24 08:42:48.590] [2025-09-24 08:42:48.590] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:42:49.780] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:42:57.511] SBL1:1210.0.1.0 [2025-09-24 08:42:57.543] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:42:59.125] SBL2:1210.0.1.0 [2025-09-24 08:42:59.157] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 08:42:59.270] j-A [2025-09-24 08:43:06.640] The R5 Autosar Classic is running [2025-09-24 08:43:06.640] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:43:06.640] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:43:07.249] INIT: version 2.96 booting [2025-09-24 08:43:07.360] INIT: Entering runlevel: 5 [2025-09-24 08:43:07.520] mtd32 attached [2025-09-24 08:43:07.536] mtd28 attached [2025-09-24 08:43:07.536] mtd24 attached [2025-09-24 08:43:07.583] RTNETLINK answers: File exists [2025-09-24 08:43:07.646] ubi0:dml_code is mounted. [2025-09-24 08:43:07.646] ubi1:animations is mounted. [2025-09-24 08:43:07.646] ubi2:textures is mounted. [2025-09-24 08:43:07.646] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:43:07.646] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:43:07.646] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:43:07.646] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:43:07.646] data.LB_FadeInType0=100 [2025-09-24 08:43:07.646] data.CHLH_FadeInType0=0 [2025-09-24 08:43:07.646] data.WU_FadeInDelay=0 [2025-09-24 08:43:07.646] max_time_out=0 [2025-09-24 08:43:07.646] No splash screen [2025-09-24 08:43:07.646] stop dss Done [2025-09-24 08:43:07.646] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:43:07.724] /dev/mem opened. [2025-09-24 08:43:07.724] Memory mapped at address 0xffff979a3000. [2025-09-24 08:43:07.724] Read at address 0x00600018 (0xffff979a3018): 0x00000000 [2025-09-24 08:43:07.724] Write at address 0x00600018 (0xffff979a3018): 0x00400040, readback 0x00400040 [2025-09-24 08:43:07.724] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:43:07.724] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:43:07.900] Loaded PowerVR consumer services. [2025-09-24 08:43:07.932] 512+0 records in [2025-09-24 08:43:07.932] 512+0 records out [2025-09-24 08:43:07.964] Starting syslogd/klogd: done [2025-09-24 08:43:08.012] Waiting data available... [2025-09-24 08:43:08.012] DML Start [2025-09-24 08:43:08.188] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:43:08.411] DML res1: 0 [2025-09-24 08:43:08.851] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:43:08.851] Read Success [2025-09-24 08:43:08.851] Verifying certificate... [2025-09-24 08:43:09.122] Verified OK [2025-09-24 08:43:09.138] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:43:10.737] Verified OK [2025-09-24 08:43:10.737] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:43:11.392] Verified OK [2025-09-24 08:43:11.392] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:43:14.062] fs.protected_hardlinks = 1 [2025-09-24 08:43:14.062] fs.protected_symlinks = 1 [2025-09-24 08:43:14.079] kernel.modules_disabled = 1 [2025-09-24 08:43:14.270] [2025-09-24 08:43:14.270] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:43:15.481] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:43:23.214] SBL1:1210.0.1.0 [2025-09-24 08:43:23.262] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:43:24.829] SBL2:1210.0.1.0 [2025-09-24 08:43:24.860] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:43:24.973] j-A [2025-09-24 08:43:32.345] The R5 Autosar Classic is running [2025-09-24 08:43:32.345] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:43:32.345] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:43:32.952] INIT: version 2.96 booting [2025-09-24 08:43:33.064] INIT: Entering runlevel: 5 [2025-09-24 08:43:33.208] mtd28 attached [2025-09-24 08:43:33.224] mtd24 attached [2025-09-24 08:43:33.240] mtd32 attached [2025-09-24 08:43:33.271] ubi0:animations is mounted. [2025-09-24 08:43:33.287] RTNETLINK answers: File exists [2025-09-24 08:43:33.347] ubi1:textures is mounted. [2025-09-24 08:43:33.347] ubi2:dml_code is mounted. [2025-09-24 08:43:33.347] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:43:33.347] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:43:33.347] data.LB_FadeInType0=100 [2025-09-24 08:43:33.347] data.CHLH_FadeInType0=0 [2025-09-24 08:43:33.347] data.WU_FadeInDelay=0 [2025-09-24 08:43:33.347] max_time_out=0 [2025-09-24 08:43:33.347] No splash screen [2025-09-24 08:43:33.347] stop dss Done [2025-09-24 08:43:33.347] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:43:33.347] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:43:33.347] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:43:33.404] /dev/mem opened. [2025-09-24 08:43:33.404] Memory mapped at address 0xffffafbde000. [2025-09-24 08:43:33.404] Read at address 0x00600018 (0xffffafbde018): 0x00000000 [2025-09-24 08:43:33.404] Write at address 0x00600018 (0xffffafbde018): 0x00400040, readback 0x00400040 [2025-09-24 08:43:33.404] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:43:33.420] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:43:33.548] Loaded PowerVR consumer services. [2025-09-24 08:43:33.659] 512+0 records in [2025-09-24 08:43:33.659] 512+0 records out [2025-09-24 08:43:33.675] Waiting data available... [2025-09-24 08:43:33.707] Starting syslogd/klogd: done [2025-09-24 08:43:33.723] DML Start [2025-09-24 08:43:33.932] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:43:34.139] DML res1: 0 [2025-09-24 08:43:34.599] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:43:34.599] Read Success [2025-09-24 08:43:34.599] Verifying certificate... [2025-09-24 08:43:34.839] Verified OK [2025-09-24 08:43:34.855] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:43:36.613] Verified OK [2025-09-24 08:43:36.613] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:43:37.188] Verified OK [2025-09-24 08:43:37.188] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:43:39.746] fs.protected_hardlinks = 1 [2025-09-24 08:43:39.762] fs.protected_symlinks = 1 [2025-09-24 08:43:39.762] kernel.modules_disabled = 1 [2025-09-24 08:43:39.953] [2025-09-24 08:43:39.953] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:43:41.232] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:43:48.922] SBL1:1210.0.1.0 [2025-09-24 08:43:48.954] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:43:50.537] SBL2:1210.0.1.0 [2025-09-24 08:43:50.569] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:43:50.681] j-A [2025-09-24 08:43:58.019] The R5 Autosar Classic is running [2025-09-24 08:43:58.050] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:43:58.050] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:43:58.658] INIT: version 2.96 booting [2025-09-24 08:43:58.769] INIT: Entering runlevel: 5 [2025-09-24 08:43:58.930] mtd28 attached [2025-09-24 08:43:58.930] mtd24 attached [2025-09-24 08:43:58.946] mtd32 attached [2025-09-24 08:43:58.977] ubi0:animations is mounted. [2025-09-24 08:43:58.993] RTNETLINK answers: File exists [2025-09-24 08:43:59.030] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:43:59.030] ubi1:textures is mounted. [2025-09-24 08:43:59.030] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:43:59.030] ubi2:dml_code is mounted. [2025-09-24 08:43:59.030] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:43:59.030] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:43:59.030] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:43:59.052] data.LB_FadeInType0=100 [2025-09-24 08:43:59.052] data.CHLH_FadeInType0=0 [2025-09-24 08:43:59.052] data.WU_FadeInDelay=0 [2025-09-24 08:43:59.052] max_time_out=0 [2025-09-24 08:43:59.052] No splash screen [2025-09-24 08:43:59.052] stop dss Done [2025-09-24 08:43:59.130] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:43:59.130] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:43:59.130] /dev/mem opened. [2025-09-24 08:43:59.130] Memory mapped at address 0xffffa7a25000. [2025-09-24 08:43:59.130] Read at address 0x00600018 (0xffffa7a25018): 0x00000000 [2025-09-24 08:43:59.130] Write at address 0x00600018 (0xffffa7a25018): 0x00400040, readback 0x00400040 [2025-09-24 08:43:59.306] Loaded PowerVR consumer services. [2025-09-24 08:43:59.338] 512+0 records in [2025-09-24 08:43:59.338] 512+0 records out [2025-09-24 08:43:59.370] Waiting data available... [2025-09-24 08:43:59.402] Starting syslogd/klogd: done [2025-09-24 08:43:59.418] DML Start [2025-09-24 08:43:59.577] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:43:59.802] DML res1: 0 [2025-09-24 08:44:00.233] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:44:00.254] Read Success [2025-09-24 08:44:00.254] Verifying certificate... [2025-09-24 08:44:00.510] Verified OK [2025-09-24 08:44:00.510] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:44:02.157] Verified OK [2025-09-24 08:44:02.173] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:44:02.778] Verified OK [2025-09-24 08:44:02.778] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:44:05.401] fs.protected_hardlinks = 1 [2025-09-24 08:44:05.401] fs.protected_symlinks = 1 [2025-09-24 08:44:05.417] kernel.modules_disabled = 1 [2025-09-24 08:44:05.609] [2025-09-24 08:44:05.609] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:44:06.929] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:44:14.624] SBL1:1210.0.1.0 [2025-09-24 08:44:14.672] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:44:16.239] SBL2:1210.0.1.0 [2025-09-24 08:44:16.271] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:44:16.383] j-A [2025-09-24 08:44:23.757] The R5 Autosar Classic is running [2025-09-24 08:44:23.757] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:44:23.757] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:44:24.365] INIT: version 2.96 booting [2025-09-24 08:44:24.477] INIT: Entering runlevel: 5 [2025-09-24 08:44:24.637] mtd32 attached [2025-09-24 08:44:24.637] mtd24 attached [2025-09-24 08:44:24.652] mtd28 attached [2025-09-24 08:44:24.700] ubi1:textures is mounted. [2025-09-24 08:44:24.700] RTNETLINK answers: File exists [2025-09-24 08:44:24.760] ubi0:dml_code is mounted. [2025-09-24 08:44:24.760] ubi2:animations is mounted. [2025-09-24 08:44:24.760] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:44:24.760] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:44:24.760] data.LB_FadeInType0=100 [2025-09-24 08:44:24.760] data.CHLH_FadeInType0=0 [2025-09-24 08:44:24.760] data.WU_FadeInDelay=0 [2025-09-24 08:44:24.760] max_time_out=0 [2025-09-24 08:44:24.760] No splash screen [2025-09-24 08:44:24.760] stop dss Done [2025-09-24 08:44:24.760] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:44:24.760] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:44:24.760] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:44:24.816] /dev/mem opened. [2025-09-24 08:44:24.816] Memory mapped at address 0xffffa8a6e000. [2025-09-24 08:44:24.816] Read at address 0x00600018 (0xffffa8a6e018): 0x00000000 [2025-09-24 08:44:24.816] Write at address 0x00600018 (0xffffa8a6e018): 0x00400040, readback 0x00400040 [2025-09-24 08:44:24.816] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:44:24.816] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:44:25.008] Loaded PowerVR consumer services. [2025-09-24 08:44:25.103] Waiting data available... [2025-09-24 08:44:25.103] 512+0 records in [2025-09-24 08:44:25.103] 512+0 records out [2025-09-24 08:44:25.151] Starting syslogd/klogd: done [2025-09-24 08:44:25.183] DML Start [2025-09-24 08:44:25.375] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:44:25.616] DML res1: 0 [2025-09-24 08:44:26.011] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:44:26.011] Read Success [2025-09-24 08:44:26.011] Verifying certificate... [2025-09-24 08:44:26.235] Verified OK [2025-09-24 08:44:26.251] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:44:27.897] Verified OK [2025-09-24 08:44:27.897] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:44:28.437] Verified OK [2025-09-24 08:44:28.437] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:44:30.947] fs.protected_hardlinks = 1 [2025-09-24 08:44:30.962] fs.protected_symlinks = 1 [2025-09-24 08:44:30.962] kernel.modules_disabled = 1 [2025-09-24 08:44:31.155] [2025-09-24 08:44:31.155] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:44:32.686] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:44:40.344] SBL1:1210.0.1.0 [2025-09-24 08:44:40.392] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:44:41.959] SBL2:1210.0.1.0 [2025-09-24 08:44:41.991] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:44:42.102] j-A [2025-09-24 08:44:49.476] The R5 Autosar Classic is running [2025-09-24 08:44:49.476] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:44:49.476] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:44:50.083] INIT: version 2.96 booting [2025-09-24 08:44:50.196] INIT: Entering runlevel: 5 [2025-09-24 08:44:50.339] mtd24 attached [2025-09-24 08:44:50.355] mtd32 attached [2025-09-24 08:44:50.371] mtd28 attached [2025-09-24 08:44:50.387] ubi0:textures is mounted. [2025-09-24 08:44:50.419] RTNETLINK answers: File exists [2025-09-24 08:44:50.419] ubi1:dml_code is mounted. [2025-09-24 08:44:50.472] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:44:50.472] ubi2:animations is mounted. [2025-09-24 08:44:50.472] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:44:50.472] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:44:50.472] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:44:50.472] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:44:50.472] data.LB_FadeInType0=100 [2025-09-24 08:44:50.472] data.CHLH_FadeInType0=0 [2025-09-24 08:44:50.472] data.WU_FadeInDelay=0 [2025-09-24 08:44:50.472] max_time_out=0 [2025-09-24 08:44:50.472] No splash screen [2025-09-24 08:44:50.472] stop dss Done [2025-09-24 08:44:50.488] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:44:50.515] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:44:50.548] /dev/mem opened. [2025-09-24 08:44:50.548] Memory mapped at address 0xffff85be2000. [2025-09-24 08:44:50.548] Read at address 0x00600018 (0xffff85be2018): 0x00000000 [2025-09-24 08:44:50.548] Write at address 0x00600018 (0xffff85be2018): 0x00400040, readback 0x00400040 [2025-09-24 08:44:50.723] Loaded PowerVR consumer services. [2025-09-24 08:44:50.776] 512+0 records in [2025-09-24 08:44:50.776] 512+0 records out [2025-09-24 08:44:50.776] Waiting data available... [2025-09-24 08:44:50.809] Starting syslogd/klogd: done [2025-09-24 08:44:50.824] DML Start [2025-09-24 08:44:50.984] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:44:51.176] DML res1: 0 [2025-09-24 08:44:51.717] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:44:51.717] Read Success [2025-09-24 08:44:51.717] Verifying certificate... [2025-09-24 08:44:51.972] Verified OK [2025-09-24 08:44:51.988] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:44:53.817] Verified OK [2025-09-24 08:44:53.817] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:44:54.358] Verified OK [2025-09-24 08:44:54.358] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:44:56.772] fs.protected_hardlinks = 1 [2025-09-24 08:44:56.772] fs.protected_symlinks = 1 [2025-09-24 08:44:56.788] kernel.modules_disabled = 1 [2025-09-24 08:44:56.996] [2025-09-24 08:44:56.996] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:44:58.317] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:45:06.033] SBL1:1210.0.1.0 [2025-09-24 08:45:06.081] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:45:07.648] SBL2:1210.0.1.0 [2025-09-24 08:45:07.679] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:45:07.791] j-A [2025-09-24 08:45:15.144] The R5 Autosar Classic is running [2025-09-24 08:45:15.144] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:45:15.165] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:45:15.773] INIT: version 2.96 booting [2025-09-24 08:45:15.885] INIT: Entering runlevel: 5 [2025-09-24 08:45:16.044] mtd32 attached [2025-09-24 08:45:16.044] mtd24 attached [2025-09-24 08:45:16.061] mtd28 attached [2025-09-24 08:45:16.109] ubi0:dml_code is mounted. [2025-09-24 08:45:16.109] RTNETLINK answers: File exists [2025-09-24 08:45:16.168] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:45:16.168] ubi1:textures is mounted. [2025-09-24 08:45:16.168] ubi2:animations is mounted. [2025-09-24 08:45:16.168] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:45:16.168] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:45:16.168] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:45:16.168] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:45:16.168] data.LB_FadeInType0=100 [2025-09-24 08:45:16.168] data.CHLH_FadeInType0=0 [2025-09-24 08:45:16.168] data.WU_FadeInDelay=0 [2025-09-24 08:45:16.168] max_time_out=0 [2025-09-24 08:45:16.168] No splash screen [2025-09-24 08:45:16.168] stop dss Done [2025-09-24 08:45:16.217] /dev/mem opened. [2025-09-24 08:45:16.217] Memory mapped at address 0xffff9fda2000. [2025-09-24 08:45:16.249] Read at address 0x00600018 (0xffff9fda2018): 0x00000000 [2025-09-24 08:45:16.249] Write at address 0x00600018 (0xffff9fda2018): 0x00400040, readback 0x00400040 [2025-09-24 08:45:16.249] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:45:16.249] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:45:16.345] Loaded PowerVR consumer services. [2025-09-24 08:45:16.501] 512+0 records in [2025-09-24 08:45:16.501] 512+0 records out [2025-09-24 08:45:16.501] Waiting data available... [2025-09-24 08:45:16.517] Starting syslogd/klogd: done [2025-09-24 08:45:16.533] DML Start [2025-09-24 08:45:16.725] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:45:16.933] DML res1: 0 [2025-09-24 08:45:17.333] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:45:17.349] Read Success [2025-09-24 08:45:17.349] Verifying certificate... [2025-09-24 08:45:17.573] Verified OK [2025-09-24 08:45:17.573] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:45:19.247] Verified OK [2025-09-24 08:45:19.247] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:45:19.928] Verified OK [2025-09-24 08:45:19.928] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:45:22.598] fs.protected_hardlinks = 1 [2025-09-24 08:45:22.614] fs.protected_symlinks = 1 [2025-09-24 08:45:22.614] kernel.modules_disabled = 1 [2025-09-24 08:45:22.822] [2025-09-24 08:45:22.822] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:45:24.033] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:45:31.755] SBL1:1210.0.1.0 [2025-09-24 08:45:31.787] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:45:33.370] SBL2:1210.0.1.0 [2025-09-24 08:45:33.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:45:33.497] j-A [2025-09-24 08:45:40.851] The R5 Autosar Classic is running [2025-09-24 08:45:40.877] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:45:40.877] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:45:41.484] INIT: version 2.96 booting [2025-09-24 08:45:41.596] INIT: Entering runlevel: 5 [2025-09-24 08:45:41.755] mtd28 attached [2025-09-24 08:45:41.771] mtd32 attached [2025-09-24 08:45:41.771] mtd24 attached [2025-09-24 08:45:41.819] ubi0:animations is mounted. [2025-09-24 08:45:41.835] RTNETLINK answers: File exists [2025-09-24 08:45:41.835] ubi2:textures is mounted. [2025-09-24 08:45:41.892] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:45:41.892] ubi1:dml_code is mounted. [2025-09-24 08:45:41.892] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:45:41.892] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:45:41.892] data.LB_FadeInType0=100 [2025-09-24 08:45:41.892] data.CHLH_FadeInType0=0 [2025-09-24 08:45:41.892] data.WU_FadeInDelay=0 [2025-09-24 08:45:41.892] max_time_out=0 [2025-09-24 08:45:41.892] No splash screen [2025-09-24 08:45:41.892] stop dss Done [2025-09-24 08:45:41.892] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:45:41.892] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:45:41.964] /dev/mem opened. [2025-09-24 08:45:41.964] Memory mapped at address 0xffffa1b7a000. [2025-09-24 08:45:41.964] Read at address 0x00600018 (0xffffa1b7a018): 0x00000000 [2025-09-24 08:45:41.964] Write at address 0x00600018 (0xffffa1b7a018): 0x00400040, readback 0x00400040 [2025-09-24 08:45:41.964] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:45:41.980] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:45:42.043] Loaded PowerVR consumer services. [2025-09-24 08:45:42.171] 512+0 records in [2025-09-24 08:45:42.171] 512+0 records out [2025-09-24 08:45:42.203] Waiting data available... [2025-09-24 08:45:42.235] Starting syslogd/klogd: done [2025-09-24 08:45:42.251] DML Start [2025-09-24 08:45:42.427] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:45:42.635] DML res1: 0 [2025-09-24 08:45:43.074] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:45:43.074] Read Success [2025-09-24 08:45:43.074] Verifying certificate... [2025-09-24 08:45:43.297] Verified OK [2025-09-24 08:45:43.313] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:45:44.960] Verified OK [2025-09-24 08:45:44.960] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:45:45.593] Verified OK [2025-09-24 08:45:45.593] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:45:48.086] fs.protected_hardlinks = 1 [2025-09-24 08:45:48.102] fs.protected_symlinks = 1 [2025-09-24 08:45:48.102] kernel.modules_disabled = 1 [2025-09-24 08:45:48.311] [2025-09-24 08:45:48.326] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:45:49.747] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:45:57.444] SBL1:1210.0.1.0 [2025-09-24 08:45:57.492] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:45:59.059] SBL2:1210.0.1.0 [2025-09-24 08:45:59.091] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:45:59.203] j-A [2025-09-24 08:46:06.557] The R5 Autosar Classic is running [2025-09-24 08:46:06.557] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:46:06.577] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:46:07.185] INIT: version 2.96 booting [2025-09-24 08:46:07.297] INIT: Entering runlevel: 5 [2025-09-24 08:46:07.457] mtd28 attached [2025-09-24 08:46:07.457] mtd32 attached [2025-09-24 08:46:07.472] mtd24 attached [2025-09-24 08:46:07.520] ubi0:animations is mounted. [2025-09-24 08:46:07.520] RTNETLINK answers: File exists [2025-09-24 08:46:07.585] ubi1:dml_code is mounted. [2025-09-24 08:46:07.585] ubi2:textures is mounted. [2025-09-24 08:46:07.585] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:46:07.585] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:46:07.585] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:46:07.585] data.LB_FadeInType0=100 [2025-09-24 08:46:07.585] data.CHLH_FadeInType0=0 [2025-09-24 08:46:07.585] data.WU_FadeInDelay=0 [2025-09-24 08:46:07.585] max_time_out=0 [2025-09-24 08:46:07.585] No splash screen [2025-09-24 08:46:07.585] stop dss Done [2025-09-24 08:46:07.585] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:46:07.585] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:46:07.651] /dev/mem opened. [2025-09-24 08:46:07.651] Memory mapped at address 0xffff9948b000. [2025-09-24 08:46:07.651] Read at address 0x00600018 (0xffff9948b018): 0x00000000 [2025-09-24 08:46:07.651] Write at address 0x00600018 (0xffff9948b018): 0x00400040, readback 0x00400040 [2025-09-24 08:46:07.667] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:46:07.683] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:46:07.842] Loaded PowerVR consumer services. [2025-09-24 08:46:07.874] 512+0 records in [2025-09-24 08:46:07.874] 512+0 records out [2025-09-24 08:46:07.922] Starting syslogd/klogd: Waiting data available... [2025-09-24 08:46:07.938] done [2025-09-24 08:46:07.938] DML Start [2025-09-24 08:46:08.098] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:46:08.322] DML res1: 0 [2025-09-24 08:46:08.754] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:46:08.775] Read Success [2025-09-24 08:46:08.775] Verifying certificate... [2025-09-24 08:46:08.998] Verified OK [2025-09-24 08:46:08.998] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:46:10.645] Verified OK [2025-09-24 08:46:10.666] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:46:11.306] Verified OK [2025-09-24 08:46:11.306] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:46:13.991] fs.protected_hardlinks = 1 [2025-09-24 08:46:13.991] fs.protected_symlinks = 1 [2025-09-24 08:46:14.007] kernel.modules_disabled = 1 [2025-09-24 08:46:14.199] [2025-09-24 08:46:14.199] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:46:15.484] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:46:23.170] SBL1:1210.0.1.0 [2025-09-24 08:46:23.201] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:46:24.784] SBL2:1210.0.1.0 [2025-09-24 08:46:24.816] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:46:24.929] j-A [2025-09-24 08:46:32.266] The R5 Autosar Classic is running [2025-09-24 08:46:32.297] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:46:32.297] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:46:32.905] INIT: version 2.96 booting [2025-09-24 08:46:33.000] INIT: Entering runlevel: 5 [2025-09-24 08:46:33.161] mtd28 attached [2025-09-24 08:46:33.177] mtd32 attached [2025-09-24 08:46:33.193] mtd24 attached [2025-09-24 08:46:33.224] ubi0:animations is mounted. [2025-09-24 08:46:33.254] ubi1:dml_code is mounted. [2025-09-24 08:46:33.254] RTNETLINK answers: File exists [2025-09-24 08:46:33.254] ubi2:textures is mounted. [2025-09-24 08:46:33.254] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:46:33.297] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:46:33.297] data.LB_FadeInType0=100 [2025-09-24 08:46:33.297] data.CHLH_FadeInType0=0 [2025-09-24 08:46:33.297] data.WU_FadeInDelay=0 [2025-09-24 08:46:33.297] max_time_out=0 [2025-09-24 08:46:33.297] No splash screen [2025-09-24 08:46:33.297] stop dss Done [2025-09-24 08:46:33.297] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:46:33.297] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:46:33.297] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:46:33.329] /dev/mem opened. [2025-09-24 08:46:33.329] Memory mapped at address 0xffffa0007000. [2025-09-24 08:46:33.355] Read at address 0x00600018 (0xffffa0007018): 0x00000000 [2025-09-24 08:46:33.355] Write at address 0x00600018 (0xffffa0007018): 0x00400040, readback 0x00400040 [2025-09-24 08:46:33.385] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:46:33.385] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:46:33.465] Loaded PowerVR consumer services. [2025-09-24 08:46:33.616] 512+0 records in [2025-09-24 08:46:33.616] 512+0 records out [2025-09-24 08:46:33.616] Waiting data available... [2025-09-24 08:46:33.632] Starting syslogd/klogd: done [2025-09-24 08:46:33.648] DML Start [2025-09-24 08:46:33.872] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:46:34.111] DML res1: 0 [2025-09-24 08:46:34.463] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:46:34.463] Read Success [2025-09-24 08:46:34.479] Verifying certificate... [2025-09-24 08:46:34.719] Verified OK [2025-09-24 08:46:34.735] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:46:36.457] Verified OK [2025-09-24 08:46:36.457] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:46:37.110] Verified OK [2025-09-24 08:46:37.110] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:46:39.730] fs.protected_hardlinks = 1 [2025-09-24 08:46:39.730] fs.protected_symlinks = 1 [2025-09-24 08:46:39.730] kernel.modules_disabled = 1 [2025-09-24 08:46:39.923] [2025-09-24 08:46:39.923] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:46:41.165] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:46:48.876] SBL1:1210.0.1.0 [2025-09-24 08:46:48.908] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:46:50.491] SBL2:1210.0.1.0 [2025-09-24 08:46:50.523] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:46:50.619] j-A [2025-09-24 08:46:57.973] The R5 Autosar Classic is running [2025-09-24 08:46:57.998] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:46:57.998] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:46:58.606] INIT: version 2.96 booting [2025-09-24 08:46:58.717] INIT: Entering runlevel: 5 [2025-09-24 08:46:58.861] mtd24 attached [2025-09-24 08:46:58.877] mtd28 attached [2025-09-24 08:46:58.909] ubi0:textures is mounted. [2025-09-24 08:46:58.909] mtd32 attached [2025-09-24 08:46:58.926] ubi1:animations is mounted. [2025-09-24 08:46:58.942] RTNETLINK answers: File exists [2025-09-24 08:46:58.979] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:46:58.979] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:46:58.979] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:46:58.979] ubi2:dml_code is mounted. [2025-09-24 08:46:58.979] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:46:58.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:46:58.979] data.LB_FadeInType0=100 [2025-09-24 08:46:58.999] data.CHLH_FadeInType0=0 [2025-09-24 08:46:58.999] data.WU_FadeInDelay=0 [2025-09-24 08:46:58.999] max_time_out=0 [2025-09-24 08:46:58.999] No splash screen [2025-09-24 08:46:58.999] stop dss Done [2025-09-24 08:46:59.031] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:46:59.047] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:46:59.082] /dev/mem opened. [2025-09-24 08:46:59.082] Memory mapped at address 0xffff9ad7f000. [2025-09-24 08:46:59.082] Read at address 0x00600018 (0xffff9ad7f018): 0x00000000 [2025-09-24 08:46:59.082] Write at address 0x00600018 (0xffff9ad7f018): 0x00400040, readback 0x00400040 [2025-09-24 08:46:59.258] Loaded PowerVR consumer services. [2025-09-24 08:46:59.306] 512+0 records in [2025-09-24 08:46:59.306] 512+0 records out [2025-09-24 08:46:59.354] Waiting data available... [2025-09-24 08:46:59.354] Starting syslogd/klogd: done [2025-09-24 08:46:59.386] DML Start [2025-09-24 08:46:59.545] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:46:59.754] DML res1: 0 [2025-09-24 08:47:00.249] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:47:00.265] Read Success [2025-09-24 08:47:00.265] Verifying certificate... [2025-09-24 08:47:00.489] Verified OK [2025-09-24 08:47:00.505] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:47:02.055] Verified OK [2025-09-24 08:47:02.055] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:47:02.652] Verified OK [2025-09-24 08:47:02.652] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:47:05.386] fs.protected_hardlinks = 1 [2025-09-24 08:47:05.386] fs.protected_symlinks = 1 [2025-09-24 08:47:05.401] kernel.modules_disabled = 1 [2025-09-24 08:47:05.593] [2025-09-24 08:47:05.593] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:47:06.881] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:47:14.566] SBL1:1210.0.1.0 [2025-09-24 08:47:14.614] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:47:16.181] SBL2:1210.0.1.0 [2025-09-24 08:47:16.229] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:47:16.325] j-A [2025-09-24 08:47:23.679] The R5 Autosar Classic is running [2025-09-24 08:47:23.703] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:47:23.703] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:47:24.311] INIT: version 2.96 booting [2025-09-24 08:47:24.422] INIT: Entering runlevel: 5 [2025-09-24 08:47:24.567] mtd24 attached [2025-09-24 08:47:24.583] mtd28 attached [2025-09-24 08:47:24.599] mtd32 attached [2025-09-24 08:47:24.647] ubi0:textures is mounted. [2025-09-24 08:47:24.647] RTNETLINK answers: File exists [2025-09-24 08:47:24.707] ubi1:animations is mounted. [2025-09-24 08:47:24.707] ubi2:dml_code is mounted. [2025-09-24 08:47:24.707] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:47:24.707] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:47:24.707] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:47:24.707] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:47:24.707] data.LB_FadeInType0=100 [2025-09-24 08:47:24.707] data.CHLH_FadeInType0=0 [2025-09-24 08:47:24.707] data.WU_FadeInDelay=0 [2025-09-24 08:47:24.707] max_time_out=0 [2025-09-24 08:47:24.707] No splash screen [2025-09-24 08:47:24.707] stop dss Done [2025-09-24 08:47:24.707] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:47:24.771] /dev/mem opened. [2025-09-24 08:47:24.771] Memory mapped at address 0xffffa569a000. [2025-09-24 08:47:24.771] Read at address 0x00600018 (0xffffa569a018): 0x00000000 [2025-09-24 08:47:24.771] Write at address 0x00600018 (0xffffa569a018): 0x00400040, readback 0x00400040 [2025-09-24 08:47:24.803] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:47:24.819] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:47:24.932] Loaded PowerVR consumer services. [2025-09-24 08:47:25.027] Waiting data available... [2025-09-24 08:47:25.043] 512+0 records in [2025-09-24 08:47:25.043] 512+0 records out [2025-09-24 08:47:25.075] Starting syslogd/klogd: done [2025-09-24 08:47:25.091] DML Start [2025-09-24 08:47:25.251] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:47:25.491] DML res1: 0 [2025-09-24 08:47:25.938] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:47:25.954] Read Success [2025-09-24 08:47:25.954] Verifying certificate... [2025-09-24 08:47:26.194] Verified OK [2025-09-24 08:47:26.210] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:47:28.062] Verified OK [2025-09-24 08:47:28.062] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:47:28.569] Verified OK [2025-09-24 08:47:28.569] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:47:31.074] fs.protected_hardlinks = 1 [2025-09-24 08:47:31.074] fs.protected_symlinks = 1 [2025-09-24 08:47:31.074] kernel.modules_disabled = 1 [2025-09-24 08:47:31.249] [2025-09-24 08:47:31.249] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:47:32.597] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:47:40.288] SBL1:1210.0.1.0 [2025-09-24 08:47:40.320] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:47:41.904] SBL2:1210.0.1.0 [2025-09-24 08:47:41.935] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:47:42.047] j-A [2025-09-24 08:47:49.419] The R5 Autosar Classic is running [2025-09-24 08:47:49.419] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:47:49.419] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:47:50.027] INIT: version 2.96 booting [2025-09-24 08:47:50.138] INIT: Entering runlevel: 5 [2025-09-24 08:47:50.298] mtd24 attached [2025-09-24 08:47:50.298] mtd28 attached [2025-09-24 08:47:50.330] mtd32 attached [2025-09-24 08:47:50.346] ubi0:textures is mounted. [2025-09-24 08:47:50.399] RTNETLINK answers: File exists [2025-09-24 08:47:50.399] ubi1:animations is mounted. [2025-09-24 08:47:50.399] ubi2:dml_code is mounted. [2025-09-24 08:47:50.399] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:47:50.399] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:47:50.399] data.LB_FadeInType0=100 [2025-09-24 08:47:50.436] data.CHLH_FadeInType0=0 [2025-09-24 08:47:50.436] data.WU_FadeInDelay=0 [2025-09-24 08:47:50.436] max_time_out=0 [2025-09-24 08:47:50.436] No splash screen [2025-09-24 08:47:50.436] stop dss Done [2025-09-24 08:47:50.436] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:47:50.436] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:47:50.436] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:47:50.484] /dev/mem opened. [2025-09-24 08:47:50.484] Memory mapped at address 0xffff8dc33000. [2025-09-24 08:47:50.484] Read at address 0x00600018 (0xffff8dc33018): 0x00000000 [2025-09-24 08:47:50.484] Write at address 0x00600018 (0xffff8dc33018): 0x00400040, readback 0x00400040 [2025-09-24 08:47:50.500] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:47:50.516] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:47:50.628] Loaded PowerVR consumer services. [2025-09-24 08:47:50.739] Waiting data available... [2025-09-24 08:47:50.739] 512+0 records in [2025-09-24 08:47:50.756] 512+0 records out [2025-09-24 08:47:50.772] Starting syslogd/klogd: done [2025-09-24 08:47:50.804] DML Start [2025-09-24 08:47:50.996] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:47:51.236] DML res1: 0 [2025-09-24 08:47:51.624] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:47:51.624] Read Success [2025-09-24 08:47:51.624] Verifying certificate... [2025-09-24 08:47:51.848] Verified OK [2025-09-24 08:47:51.864] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:47:53.664] Verified OK [2025-09-24 08:47:53.664] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:47:54.261] Verified OK [2025-09-24 08:47:54.261] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:47:56.772] fs.protected_hardlinks = 1 [2025-09-24 08:47:56.772] fs.protected_symlinks = 1 [2025-09-24 08:47:56.787] kernel.modules_disabled = 1 [2025-09-24 08:47:56.964] [2025-09-24 08:47:56.964] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:47:58.286] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:48:05.978] SBL1:1210.0.1.0 [2025-09-24 08:48:06.026] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:48:07.592] SBL2:1210.0.1.0 [2025-09-24 08:48:07.624] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:48:07.737] j-A [2025-09-24 08:48:15.112] The R5 Autosar Classic is running [2025-09-24 08:48:15.112] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:48:15.112] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:48:15.719] INIT: version 2.96 booting [2025-09-24 08:48:15.831] INIT: Entering runlevel: 5 [2025-09-24 08:48:15.991] mtd32 attached [2025-09-24 08:48:16.007] mtd28 attached [2025-09-24 08:48:16.007] mtd24 attached [2025-09-24 08:48:16.039] ubi0:dml_code is mounted. [2025-09-24 08:48:16.055] RTNETLINK answers: File exists [2025-09-24 08:48:16.116] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:48:16.116] ubi1:animations is mounted. [2025-09-24 08:48:16.116] ubi2:textures is mounted. [2025-09-24 08:48:16.116] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:48:16.116] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:48:16.116] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:48:16.116] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:48:16.116] data.LB_FadeInType0=100 [2025-09-24 08:48:16.116] data.CHLH_FadeInType0=0 [2025-09-24 08:48:16.116] data.WU_FadeInDelay=0 [2025-09-24 08:48:16.117] max_time_out=0 [2025-09-24 08:48:16.117] No splash screen [2025-09-24 08:48:16.117] stop dss Done [2025-09-24 08:48:16.148] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:48:16.164] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:48:16.201] /dev/mem opened. [2025-09-24 08:48:16.201] Memory mapped at address 0xffffb816c000. [2025-09-24 08:48:16.201] Read at address 0x00600018 (0xffffb816c018): 0x00000000 [2025-09-24 08:48:16.201] Write at address 0x00600018 (0xffffb816c018): 0x00400040, readback 0x00400040 [2025-09-24 08:48:16.344] Loaded PowerVR consumer services. [2025-09-24 08:48:16.424] 512+0 records in [2025-09-24 08:48:16.424] 512+0 records out [2025-09-24 08:48:16.456] Waiting data available... [2025-09-24 08:48:16.488] Starting syslogd/klogd: done [2025-09-24 08:48:16.504] DML Start [2025-09-24 08:48:16.632] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:48:16.856] DML res1: 0 [2025-09-24 08:48:17.359] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:48:17.359] Read Success [2025-09-24 08:48:17.359] Verifying certificate... [2025-09-24 08:48:17.582] Verified OK [2025-09-24 08:48:17.598] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:48:19.268] Verified OK [2025-09-24 08:48:19.268] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:48:19.867] Verified OK [2025-09-24 08:48:19.867] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:48:22.454] fs.protected_hardlinks = 1 [2025-09-24 08:48:22.454] fs.protected_symlinks = 1 [2025-09-24 08:48:22.454] kernel.modules_disabled = 1 [2025-09-24 08:48:22.630] [2025-09-24 08:48:22.630] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:48:24.002] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:48:31.677] SBL1:1210.0.1.0 [2025-09-24 08:48:31.725] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:48:33.292] SBL2:1210.0.1.0 [2025-09-24 08:48:33.340] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:48:33.436] j-A [2025-09-24 08:48:40.791] The R5 Autosar Classic is running [2025-09-24 08:48:40.812] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:48:40.812] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:48:41.419] INIT: version 2.96 booting [2025-09-24 08:48:41.531] INIT: Entering runlevel: 5 [2025-09-24 08:48:41.675] mtd24 attached [2025-09-24 08:48:41.691] mtd28 attached [2025-09-24 08:48:41.707] mtd32 attached [2025-09-24 08:48:41.814] ubi0:textures is mounted. [2025-09-24 08:48:41.814] RTNETLINK answers: File exists [2025-09-24 08:48:41.814] ubi1:animations is mounted. [2025-09-24 08:48:41.814] ubi2:dml_code is mounted. [2025-09-24 08:48:41.814] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:48:41.814] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:48:41.814] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:48:41.814] data.LB_FadeInType0=100 [2025-09-24 08:48:41.814] data.CHLH_FadeInType0=0 [2025-09-24 08:48:41.814] data.WU_FadeInDelay=0 [2025-09-24 08:48:41.814] max_time_out=0 [2025-09-24 08:48:41.814] No splash screen [2025-09-24 08:48:41.814] stop dss Done [2025-09-24 08:48:41.814] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:48:41.814] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:48:41.846] /dev/mem opened. [2025-09-24 08:48:41.893] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:48:41.893] Memory mapped at address 0xffff8cd74000. [2025-09-24 08:48:41.893] Read at address 0x00600018 (0xffff8cd74018): 0x00000000 [2025-09-24 08:48:41.893] Write at address 0x00600018 (0xffff8cd74018): 0x00400040, readback 0x00400040 [2025-09-24 08:48:41.893] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:48:42.004] Loaded PowerVR consumer services. [2025-09-24 08:48:42.137] Waiting data available... [2025-09-24 08:48:42.137] 512+0 records in [2025-09-24 08:48:42.137] 512+0 records out [2025-09-24 08:48:42.153] Starting syslogd/klogd: done [2025-09-24 08:48:42.170] DML Start [2025-09-24 08:48:42.346] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:48:42.585] DML res1: 0 [2025-09-24 08:48:43.065] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:48:43.065] Read Success [2025-09-24 08:48:43.065] Verifying certificate... [2025-09-24 08:48:43.336] Verified OK [2025-09-24 08:48:43.352] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:48:45.045] Verified OK [2025-09-24 08:48:45.045] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:48:45.667] Verified OK [2025-09-24 08:48:45.667] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:48:48.289] fs.protected_hardlinks = 1 [2025-09-24 08:48:48.305] fs.protected_symlinks = 1 [2025-09-24 08:48:48.305] kernel.modules_disabled = 1 [2025-09-24 08:48:48.497] [2025-09-24 08:48:48.497] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:48:49.689] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:48:57.382] SBL1:1210.0.1.0 [2025-09-24 08:48:57.430] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:48:58.998] SBL2:1210.0.1.0 [2025-09-24 08:48:59.030] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:48:59.141] j-A [2025-09-24 08:49:06.515] The R5 Autosar Classic is running [2025-09-24 08:49:06.515] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:49:06.515] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:49:07.122] INIT: version 2.96 booting [2025-09-24 08:49:07.235] INIT: Entering runlevel: 5 [2025-09-24 08:49:07.378] mtd24 attached [2025-09-24 08:49:07.394] mtd28 attached [2025-09-24 08:49:07.410] mtd32 attached [2025-09-24 08:49:07.490] RTNETLINK answers: File exists [2025-09-24 08:49:07.490] ubi0:textures is mounted. [2025-09-24 08:49:07.490] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:49:07.490] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:49:07.490] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:49:07.490] ubi1:animations is mounted. [2025-09-24 08:49:07.490] ubi2:dml_code is mounted. [2025-09-24 08:49:07.490] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:49:07.490] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:49:07.520] data.LB_FadeInType0=100 [2025-09-24 08:49:07.520] data.CHLH_FadeInType0=0 [2025-09-24 08:49:07.520] data.WU_FadeInDelay=0 [2025-09-24 08:49:07.520] max_time_out=0 [2025-09-24 08:49:07.520] No splash screen [2025-09-24 08:49:07.520] stop dss Done [2025-09-24 08:49:07.549] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:49:07.549] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:49:07.605] /dev/mem opened. [2025-09-24 08:49:07.605] Memory mapped at address 0xffff9ec81000. [2025-09-24 08:49:07.605] Read at address 0x00600018 (0xffff9ec81018): 0x00000000 [2025-09-24 08:49:07.605] Write at address 0x00600018 (0xffff9ec81018): 0x00400040, readback 0x00400040 [2025-09-24 08:49:07.684] Loaded PowerVR consumer services. [2025-09-24 08:49:07.813] 512+0 records in [2025-09-24 08:49:07.813] 512+0 records out [2025-09-24 08:49:07.828] Waiting data available... [2025-09-24 08:49:07.876] Starting syslogd/klogd: done [2025-09-24 08:49:07.892] DML Start [2025-09-24 08:49:08.052] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:49:08.276] DML res1: 0 [2025-09-24 08:49:08.724] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:49:08.740] Read Success [2025-09-24 08:49:08.740] Verifying certificate... [2025-09-24 08:49:09.011] Verified OK [2025-09-24 08:49:09.027] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:49:10.780] Verified OK [2025-09-24 08:49:10.780] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:49:11.336] Verified OK [2025-09-24 08:49:11.336] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:49:13.942] fs.protected_hardlinks = 1 [2025-09-24 08:49:13.942] fs.protected_symlinks = 1 [2025-09-24 08:49:13.958] kernel.modules_disabled = 1 [2025-09-24 08:49:14.149] [2025-09-24 08:49:14.149] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:49:15.381] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:49:23.081] SBL1:1210.0.1.0 [2025-09-24 08:49:23.129] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:49:24.695] SBL2:1210.0.1.0 [2025-09-24 08:49:24.728] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:49:24.840] j-A [2025-09-24 08:49:32.213] The R5 Autosar Classic is running [2025-09-24 08:49:32.213] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:49:32.213] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:49:32.820] INIT: version 2.96 booting [2025-09-24 08:49:32.932] INIT: Entering runlevel: 5 [2025-09-24 08:49:33.092] mtd32 attached [2025-09-24 08:49:33.108] mtd28 attached [2025-09-24 08:49:33.124] mtd24 attached [2025-09-24 08:49:33.156] ubi0:dml_code is mounted. [2025-09-24 08:49:33.156] RTNETLINK answers: File exists [2025-09-24 08:49:33.213] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:49:33.213] ubi2:textures is mounted. [2025-09-24 08:49:33.213] ubi1:animations is mounted. [2025-09-24 08:49:33.213] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:49:33.213] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:49:33.213] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:49:33.213] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:49:33.213] data.LB_FadeInType0=100 [2025-09-24 08:49:33.213] data.CHLH_FadeInType0=0 [2025-09-24 08:49:33.213] data.WU_FadeInDelay=0 [2025-09-24 08:49:33.213] max_time_out=0 [2025-09-24 08:49:33.213] No splash screen [2025-09-24 08:49:33.213] stop dss Done [2025-09-24 08:49:33.278] /dev/mem opened. [2025-09-24 08:49:33.278] Memory mapped at address 0xffffac667000. [2025-09-24 08:49:33.278] Read at address 0x00600018 (0xffffac667018): 0x00000000 [2025-09-24 08:49:33.278] Write at address 0x00600018 (0xffffac667018): 0x00400040, readback 0x00400040 [2025-09-24 08:49:33.278] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:49:33.294] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:49:33.390] Loaded PowerVR consumer services. [2025-09-24 08:49:33.518] Waiting data available... [2025-09-24 08:49:33.518] 512+0 records in [2025-09-24 08:49:33.534] 512+0 records out [2025-09-24 08:49:33.550] Starting syslogd/klogd: done [2025-09-24 08:49:33.566] DML Start [2025-09-24 08:49:33.758] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:49:33.966] DML res1: 0 [2025-09-24 08:49:34.444] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:49:34.444] Read Success [2025-09-24 08:49:34.444] Verifying certificate... [2025-09-24 08:49:34.700] Verified OK [2025-09-24 08:49:34.716] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:49:36.379] Verified OK [2025-09-24 08:49:36.379] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:49:37.031] Verified OK [2025-09-24 08:49:37.031] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:49:39.525] fs.protected_hardlinks = 1 [2025-09-24 08:49:39.541] fs.protected_symlinks = 1 [2025-09-24 08:49:39.541] kernel.modules_disabled = 1 [2025-09-24 08:49:39.717] [2025-09-24 08:49:39.717] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:49:41.095] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:49:48.793] SBL1:1210.0.1.0 [2025-09-24 08:49:48.825] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:49:50.409] SBL2:1210.0.1.0 [2025-09-24 08:49:50.440] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:49:50.552] j-A [2025-09-24 08:49:57.890] The R5 Autosar Classic is running [2025-09-24 08:49:57.922] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:49:57.922] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:49:58.529] INIT: version 2.96 booting [2025-09-24 08:49:58.640] INIT: Entering runlevel: 5 [2025-09-24 08:49:58.785] mtd28 attached [2025-09-24 08:49:58.801] mtd32 attached [2025-09-24 08:49:58.817] mtd24 attached [2025-09-24 08:49:58.849] ubi0:animations is mounted. [2025-09-24 08:49:58.865] RTNETLINK answers: File exists [2025-09-24 08:49:58.865] ubi1:dml_code is mounted. [2025-09-24 08:49:58.926] ubi2:textures is mounted. [2025-09-24 08:49:58.926] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:49:58.926] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:49:58.926] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:49:58.926] data.LB_FadeInType0=100 [2025-09-24 08:49:58.926] data.CHLH_FadeInType0=0 [2025-09-24 08:49:58.926] data.WU_FadeInDelay=0 [2025-09-24 08:49:58.926] max_time_out=0 [2025-09-24 08:49:58.926] No splash screen [2025-09-24 08:49:58.926] stop dss Done [2025-09-24 08:49:58.926] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:49:58.926] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:49:59.012] /dev/mem opened. [2025-09-24 08:49:59.012] Memory mapped at address 0xffff85fd2000. [2025-09-24 08:49:59.012] Read at address 0x00600018 (0xffff85fd2018): 0x00000000 [2025-09-24 08:49:59.012] Write at address 0x00600018 (0xffff85fd2018): 0x00400040, readback 0x00400040 [2025-09-24 08:49:59.012] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:49:59.012] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:49:59.173] Loaded PowerVR consumer services. [2025-09-24 08:49:59.220] Waiting data available... [2025-09-24 08:49:59.236] 512+0 records in [2025-09-24 08:49:59.236] 512+0 records out [2025-09-24 08:49:59.252] Starting syslogd/klogd: done [2025-09-24 08:49:59.284] DML Start [2025-09-24 08:49:59.460] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:49:59.684] DML res1: 0 [2025-09-24 08:50:00.128] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:50:00.128] Read Success [2025-09-24 08:50:00.128] Verifying certificate... [2025-09-24 08:50:00.368] Verified OK [2025-09-24 08:50:00.384] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:50:02.092] Verified OK [2025-09-24 08:50:02.092] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:50:02.730] Verified OK [2025-09-24 08:50:02.730] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:50:05.272] fs.protected_hardlinks = 1 [2025-09-24 08:50:05.288] fs.protected_symlinks = 1 [2025-09-24 08:50:05.304] kernel.modules_disabled = 1 [2025-09-24 08:50:05.496] [2025-09-24 08:50:05.496] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:50:06.788] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:50:14.500] SBL1:1210.0.1.0 [2025-09-24 08:50:14.548] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:50:16.115] SBL2:1210.0.1.0 [2025-09-24 08:50:16.163] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:50:16.259] j-A [2025-09-24 08:50:23.613] The R5 Autosar Classic is running [2025-09-24 08:50:23.635] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:50:23.635] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:50:24.242] INIT: version 2.96 booting [2025-09-24 08:50:24.354] INIT: Entering runlevel: 5 [2025-09-24 08:50:24.514] mtd28 attached [2025-09-24 08:50:24.530] mtd32 attached [2025-09-24 08:50:24.530] mtd24 attached [2025-09-24 08:50:24.578] ubi0:animations is mounted. [2025-09-24 08:50:24.594] RTNETLINK answers: File exists [2025-09-24 08:50:24.594] ubi2:textures is mounted. [2025-09-24 08:50:24.645] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:50:24.646] ubi1:dml_code is mounted. [2025-09-24 08:50:24.646] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:50:24.646] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:50:24.646] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:50:24.646] data.LB_FadeInType0=100 [2025-09-24 08:50:24.646] data.CHLH_FadeInType0=0 [2025-09-24 08:50:24.646] data.WU_FadeInDelay=0 [2025-09-24 08:50:24.646] max_time_out=0 [2025-09-24 08:50:24.646] No splash screen [2025-09-24 08:50:24.646] stop dss Done [2025-09-24 08:50:24.646] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:50:24.728] /dev/mem opened. [2025-09-24 08:50:24.728] Memory mapped at address 0xffff96ab6000. [2025-09-24 08:50:24.728] Read at address 0x00600018 (0xffff96ab6018): 0x00000000 [2025-09-24 08:50:24.728] Write at address 0x00600018 (0xffff96ab6018): 0x00400040, readback 0x00400040 [2025-09-24 08:50:24.728] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:50:24.728] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:50:24.855] Loaded PowerVR consumer services. [2025-09-24 08:50:24.982] 512+0 records in [2025-09-24 08:50:24.982] 512+0 records out [2025-09-24 08:50:24.982] Waiting data available... [2025-09-24 08:50:25.014] Starting syslogd/klogd: done [2025-09-24 08:50:25.030] DML Start [2025-09-24 08:50:25.206] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:50:25.413] DML res1: 0 [2025-09-24 08:50:25.845] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:50:25.866] Read Success [2025-09-24 08:50:25.866] Verifying certificate... [2025-09-24 08:50:26.106] Verified OK [2025-09-24 08:50:26.122] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:50:27.753] Verified OK [2025-09-24 08:50:27.753] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:50:28.360] Verified OK [2025-09-24 08:50:28.360] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:50:31.046] fs.protected_hardlinks = 1 [2025-09-24 08:50:31.061] fs.protected_symlinks = 1 [2025-09-24 08:50:31.061] kernel.modules_disabled = 1 [2025-09-24 08:50:31.254] [2025-09-24 08:50:31.254] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:50:32.548] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:50:40.189] SBL1:1210.0.1.0 [2025-09-24 08:50:40.237] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:50:41.804] SBL2:1210.0.1.0 [2025-09-24 08:50:41.835] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:50:41.948] j-A [2025-09-24 08:50:49.323] The R5 Autosar Classic is running [2025-09-24 08:50:49.323] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:50:49.323] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:50:49.930] INIT: version 2.96 booting [2025-09-24 08:50:50.042] INIT: Entering runlevel: 5 [2025-09-24 08:50:50.202] mtd32 attached [2025-09-24 08:50:50.202] mtd28 attached [2025-09-24 08:50:50.218] mtd24 attached [2025-09-24 08:50:50.266] RTNETLINK answers: File exists [2025-09-24 08:50:50.266] ubi1:animations is mounted. [2025-09-24 08:50:50.329] ubi0:dml_code is mounted. [2025-09-24 08:50:50.329] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:50:50.329] ubi2:textures is mounted. [2025-09-24 08:50:50.329] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:50:50.329] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:50:50.329] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:50:50.329] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:50:50.329] data.LB_FadeInType0=100 [2025-09-24 08:50:50.329] data.CHLH_FadeInType0=0 [2025-09-24 08:50:50.329] data.WU_FadeInDelay=0 [2025-09-24 08:50:50.329] max_time_out=0 [2025-09-24 08:50:50.329] No splash screen [2025-09-24 08:50:50.329] stop dss Done [2025-09-24 08:50:50.361] /dev/mem opened. [2025-09-24 08:50:50.397] Memory mapped at address 0xffff86b14000. [2025-09-24 08:50:50.397] Read at address 0x00600018 (0xffff86b14018): 0x00000000 [2025-09-24 08:50:50.397] Write at address 0x00600018 (0xffff86b14018): 0x00400040, readback 0x00400040 [2025-09-24 08:50:50.397] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:50:50.397] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:50:50.542] Loaded PowerVR consumer services. [2025-09-24 08:50:50.653] Waiting data available... [2025-09-24 08:50:50.670] 512+0 records in [2025-09-24 08:50:50.670] 512+0 records out [2025-09-24 08:50:50.718] Starting syslogd/klogd: done [2025-09-24 08:50:50.734] DML Start [2025-09-24 08:50:50.877] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:50:51.101] DML res1: 0 [2025-09-24 08:50:51.595] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:50:51.595] Read Success [2025-09-24 08:50:51.595] Verifying certificate... [2025-09-24 08:50:51.867] Verified OK [2025-09-24 08:50:51.883] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:50:53.684] Verified OK [2025-09-24 08:50:53.684] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:50:54.269] Verified OK [2025-09-24 08:50:54.269] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:50:56.780] fs.protected_hardlinks = 1 [2025-09-24 08:50:56.796] fs.protected_symlinks = 1 [2025-09-24 08:50:56.812] kernel.modules_disabled = 1 [2025-09-24 08:50:57.003] [2025-09-24 08:50:57.003] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:50:58.229] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:51:05.902] SBL1:1210.0.1.0 [2025-09-24 08:51:05.934] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:51:07.516] SBL2:1210.0.1.0 [2025-09-24 08:51:07.548] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:51:07.644] j-A [2025-09-24 08:51:14.997] The R5 Autosar Classic is running [2025-09-24 08:51:15.022] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:51:15.022] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:51:15.630] INIT: version 2.96 booting [2025-09-24 08:51:15.742] INIT: Entering runlevel: 5 [2025-09-24 08:51:15.901] mtd28 attached [2025-09-24 08:51:15.901] mtd24 attached [2025-09-24 08:51:15.933] ubi0:animations is mounted. [2025-09-24 08:51:15.949] mtd32 attached [2025-09-24 08:51:15.982] RTNETLINK answers: File exists [2025-09-24 08:51:15.982] ubi1:textures is mounted. [2025-09-24 08:51:16.037] ubi2:dml_code is mounted. [2025-09-24 08:51:16.037] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:51:16.037] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:51:16.037] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:51:16.037] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:51:16.037] data.LB_FadeInType0=100 [2025-09-24 08:51:16.037] data.CHLH_FadeInType0=0 [2025-09-24 08:51:16.037] data.WU_FadeInDelay=0 [2025-09-24 08:51:16.037] max_time_out=0 [2025-09-24 08:51:16.037] No splash screen [2025-09-24 08:51:16.037] stop dss Done [2025-09-24 08:51:16.037] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:51:16.069] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:51:16.107] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:51:16.107] /dev/mem opened. [2025-09-24 08:51:16.107] Memory mapped at address 0xffffb1506000. [2025-09-24 08:51:16.107] Read at address 0x00600018 (0xffffb1506018): 0x00000000 [2025-09-24 08:51:16.107] Write at address 0x00600018 (0xffffb1506018): 0x00400040, readback 0x00400040 [2025-09-24 08:51:16.282] Loaded PowerVR consumer services. [2025-09-24 08:51:16.363] 512+0 records in [2025-09-24 08:51:16.363] 512+0 records out [2025-09-24 08:51:16.379] Waiting data available... [2025-09-24 08:51:16.411] Starting syslogd/klogd: done [2025-09-24 08:51:16.427] DML Start [2025-09-24 08:51:16.634] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:51:16.858] DML res1: 0 [2025-09-24 08:51:17.255] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:51:17.255] Read Success [2025-09-24 08:51:17.255] Verifying certificate... [2025-09-24 08:51:17.542] Verified OK [2025-09-24 08:51:17.542] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:51:19.203] Verified OK [2025-09-24 08:51:19.203] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:51:19.810] Verified OK [2025-09-24 08:51:19.810] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:51:22.400] fs.protected_hardlinks = 1 [2025-09-24 08:51:22.400] fs.protected_symlinks = 1 [2025-09-24 08:51:22.400] kernel.modules_disabled = 1 [2025-09-24 08:51:22.592] [2025-09-24 08:51:22.592] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:51:23.974] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:51:31.595] SBL1:1210.0.1.0 [2025-09-24 08:51:31.643] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:51:33.210] SBL2:1210.0.1.0 [2025-09-24 08:51:33.242] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:51:33.354] j-A [2025-09-24 08:51:40.708] The R5 Autosar Classic is running [2025-09-24 08:51:40.708] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:51:40.729] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:51:41.336] INIT: version 2.96 booting [2025-09-24 08:51:41.448] INIT: Entering runlevel: 5 [2025-09-24 08:51:41.608] mtd24 attached [2025-09-24 08:51:41.608] mtd28 attached [2025-09-24 08:51:41.624] mtd32 attached [2025-09-24 08:51:41.656] ubi0:textures is mounted. [2025-09-24 08:51:41.672] RTNETLINK answers: File exists [2025-09-24 08:51:41.732] ubi1:animations is mounted. [2025-09-24 08:51:41.732] ubi2:dml_code is mounted. [2025-09-24 08:51:41.732] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:51:41.732] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:51:41.732] data.LB_FadeInType0=100 [2025-09-24 08:51:41.732] data.CHLH_FadeInType0=0 [2025-09-24 08:51:41.732] data.WU_FadeInDelay=0 [2025-09-24 08:51:41.732] max_time_out=0 [2025-09-24 08:51:41.732] No splash screen [2025-09-24 08:51:41.732] stop dss Done [2025-09-24 08:51:41.732] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:51:41.732] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:51:41.732] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:51:41.812] /dev/mem opened. [2025-09-24 08:51:41.812] Memory mapped at address 0xffff85fa5000. [2025-09-24 08:51:41.812] Read at address 0x00600018 (0xffff85fa5018): 0x00000000 [2025-09-24 08:51:41.812] Write at address 0x00600018 (0xffff85fa5018): 0x00400040, readback 0x00400040 [2025-09-24 08:51:41.812] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:51:41.812] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:51:41.877] Loaded PowerVR consumer services. [2025-09-24 08:51:42.037] 512+0 records in [2025-09-24 08:51:42.037] 512+0 records out [2025-09-24 08:51:42.053] Waiting data available... [2025-09-24 08:51:42.085] Starting syslogd/klogd: done [2025-09-24 08:51:42.101] DML Start [2025-09-24 08:51:42.260] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:51:42.484] DML res1: 0 [2025-09-24 08:51:42.963] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:51:42.963] Read Success [2025-09-24 08:51:42.979] Verifying certificate... [2025-09-24 08:51:43.220] Verified OK [2025-09-24 08:51:43.236] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:51:44.877] Verified OK [2025-09-24 08:51:44.877] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:51:45.540] Verified OK [2025-09-24 08:51:45.540] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:51:48.290] fs.protected_hardlinks = 1 [2025-09-24 08:51:48.316] fs.protected_symlinks = 1 [2025-09-24 08:51:48.316] kernel.modules_disabled = 1 [2025-09-24 08:51:48.492] [2025-09-24 08:51:48.492] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:51:49.652] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:51:57.327] SBL1:1210.0.1.0 [2025-09-24 08:51:57.359] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:51:58.941] SBL2:1210.0.1.0 [2025-09-24 08:51:58.973] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:51:59.070] j-A [2025-09-24 08:52:06.422] The R5 Autosar Classic is running [2025-09-24 08:52:06.447] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:52:06.447] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:52:07.054] INIT: version 2.96 booting [2025-09-24 08:52:07.167] INIT: Entering runlevel: 5 [2025-09-24 08:52:07.326] mtd28 attached [2025-09-24 08:52:07.343] mtd32 attached [2025-09-24 08:52:07.359] mtd24 attached [2025-09-24 08:52:07.391] ubi0:animations is mounted. [2025-09-24 08:52:07.407] RTNETLINK answers: File exists [2025-09-24 08:52:07.469] ubi1:dml_code is mounted. [2025-09-24 08:52:07.469] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:52:07.469] ubi2:textures is mounted. [2025-09-24 08:52:07.469] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:52:07.469] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:52:07.469] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:52:07.469] data.LB_FadeInType0=100 [2025-09-24 08:52:07.469] data.CHLH_FadeInType0=0 [2025-09-24 08:52:07.469] data.WU_FadeInDelay=0 [2025-09-24 08:52:07.469] max_time_out=0 [2025-09-24 08:52:07.469] No splash screen [2025-09-24 08:52:07.469] stop dss Done [2025-09-24 08:52:07.469] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:52:07.533] /dev/mem opened. [2025-09-24 08:52:07.533] Memory mapped at address 0xffff926f0000. [2025-09-24 08:52:07.533] Read at address 0x00600018 (0xffff926f0018): 0x00000000 [2025-09-24 08:52:07.533] Write at address 0x00600018 (0xffff926f0018): 0x00400040, readback 0x00400040 [2025-09-24 08:52:07.549] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:52:07.565] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:52:07.645] Loaded PowerVR consumer services. [2025-09-24 08:52:07.795] 512+0 records in [2025-09-24 08:52:07.795] 512+0 records out [2025-09-24 08:52:07.795] Waiting data available... [2025-09-24 08:52:07.827] Starting syslogd/klogd: done [2025-09-24 08:52:07.843] DML Start [2025-09-24 08:52:08.019] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:52:08.226] DML res1: 0 [2025-09-24 08:52:08.737] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:52:08.737] Read Success [2025-09-24 08:52:08.737] Verifying certificate... [2025-09-24 08:52:08.975] Verified OK [2025-09-24 08:52:08.992] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:52:10.747] Verified OK [2025-09-24 08:52:10.747] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:52:11.398] Verified OK [2025-09-24 08:52:11.398] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:52:14.020] fs.protected_hardlinks = 1 [2025-09-24 08:52:14.020] fs.protected_symlinks = 1 [2025-09-24 08:52:14.036] kernel.modules_disabled = 1 [2025-09-24 08:52:14.227] [2025-09-24 08:52:14.227] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:52:15.331] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:52:23.013] SBL1:1210.0.1.0 [2025-09-24 08:52:23.061] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:52:24.644] SBL2:1210.0.1.0 [2025-09-24 08:52:24.675] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:52:24.771] j-A [2025-09-24 08:52:32.126] The R5 Autosar Classic is running [2025-09-24 08:52:32.151] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:52:32.151] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:52:32.758] INIT: version 2.96 booting [2025-09-24 08:52:32.870] INIT: Entering runlevel: 5 [2025-09-24 08:52:33.030] mtd32 attached [2025-09-24 08:52:33.046] mtd28 attached [2025-09-24 08:52:33.046] mtd24 attached [2025-09-24 08:52:33.062] ubi0:dml_code is mounted. [2025-09-24 08:52:33.093] RTNETLINK answers: File exists [2025-09-24 08:52:33.157] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:52:33.157] ubi1:animations is mounted. [2025-09-24 08:52:33.157] ubi2:textures is mounted. [2025-09-24 08:52:33.157] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:52:33.157] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:52:33.157] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:52:33.157] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:52:33.157] data.LB_FadeInType0=100 [2025-09-24 08:52:33.157] data.CHLH_FadeInType0=0 [2025-09-24 08:52:33.157] data.WU_FadeInDelay=0 [2025-09-24 08:52:33.157] max_time_out=0 [2025-09-24 08:52:33.157] No splash screen [2025-09-24 08:52:33.157] stop dss Done [2025-09-24 08:52:33.189] /dev/mem opened. [2025-09-24 08:52:33.189] Memory mapped at address 0xffff86a45000. [2025-09-24 08:52:33.215] Read at address 0x00600018 (0xffff86a45018): 0x00000000 [2025-09-24 08:52:33.215] Write at address 0x00600018 (0xffff86a45018): 0x00400040, readback 0x00400040 [2025-09-24 08:52:33.231] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:52:33.247] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:52:33.358] Loaded PowerVR consumer services. [2025-09-24 08:52:33.471] Waiting data available... [2025-09-24 08:52:33.471] 512+0 records in [2025-09-24 08:52:33.471] 512+0 records out [2025-09-24 08:52:33.534] Starting syslogd/klogd: done [2025-09-24 08:52:33.550] DML Start [2025-09-24 08:52:33.726] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:52:33.949] DML res1: 0 [2025-09-24 08:52:34.365] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:52:34.381] Read Success [2025-09-24 08:52:34.381] Verifying certificate... [2025-09-24 08:52:34.606] Verified OK [2025-09-24 08:52:34.621] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:52:36.299] Verified OK [2025-09-24 08:52:36.320] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:52:36.928] Verified OK [2025-09-24 08:52:36.944] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:52:39.566] fs.protected_hardlinks = 1 [2025-09-24 08:52:39.582] fs.protected_symlinks = 1 [2025-09-24 08:52:39.582] kernel.modules_disabled = 1 [2025-09-24 08:52:39.774] [2025-09-24 08:52:39.774] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:52:41.060] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:52:48.739] SBL1:1210.0.1.0 [2025-09-24 08:52:48.787] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:52:50.354] SBL2:1210.0.1.0 [2025-09-24 08:52:50.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:52:50.497] j-A [2025-09-24 08:52:57.851] The R5 Autosar Classic is running [2025-09-24 08:52:57.873] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:52:57.873] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:52:58.481] INIT: version 2.96 booting [2025-09-24 08:52:58.593] INIT: Entering runlevel: 5 [2025-09-24 08:52:58.752] mtd24 attached [2025-09-24 08:52:58.752] mtd28 attached [2025-09-24 08:52:58.768] mtd32 attached [2025-09-24 08:52:58.784] ubi0:textures is mounted. [2025-09-24 08:52:58.816] RTNETLINK answers: File exists [2025-09-24 08:52:58.874] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:52:58.874] ubi2:dml_code is mounted. [2025-09-24 08:52:58.874] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:52:58.874] ubi1:animations is mounted. [2025-09-24 08:52:58.874] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:52:58.874] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:52:58.874] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:52:58.874] data.LB_FadeInType0=100 [2025-09-24 08:52:58.874] data.CHLH_FadeInType0=0 [2025-09-24 08:52:58.874] data.WU_FadeInDelay=0 [2025-09-24 08:52:58.874] max_time_out=0 [2025-09-24 08:52:58.874] No splash screen [2025-09-24 08:52:58.874] stop dss Done [2025-09-24 08:52:58.921] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:52:58.921] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:52:58.961] /dev/mem opened. [2025-09-24 08:52:58.961] Memory mapped at address 0xffff8050d000. [2025-09-24 08:52:58.961] Read at address 0x00600018 (0xffff8050d018): 0x00000000 [2025-09-24 08:52:58.961] Write at address 0x00600018 (0xffff8050d018): 0x00400040, readback 0x00400040 [2025-09-24 08:52:59.025] Loaded PowerVR consumer services. [2025-09-24 08:52:59.191] 512+0 records in [2025-09-24 08:52:59.191] 512+0 records out [2025-09-24 08:52:59.191] Waiting data available... [2025-09-24 08:52:59.224] Starting syslogd/klogd: done [2025-09-24 08:52:59.239] DML Start [2025-09-24 08:52:59.431] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:52:59.638] DML res1: 0 [2025-09-24 08:53:00.095] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:53:00.095] Read Success [2025-09-24 08:53:00.095] Verifying certificate... [2025-09-24 08:53:00.334] Verified OK [2025-09-24 08:53:00.350] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:53:01.943] Verified OK [2025-09-24 08:53:01.943] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:53:02.588] Verified OK [2025-09-24 08:53:02.588] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:53:05.178] fs.protected_hardlinks = 1 [2025-09-24 08:53:05.194] fs.protected_symlinks = 1 [2025-09-24 08:53:05.194] kernel.modules_disabled = 1 [2025-09-24 08:53:05.386] [2025-09-24 08:53:05.386] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:53:06.742] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:53:14.433] SBL1:1210.0.1.0 [2025-09-24 08:53:14.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:53:16.048] SBL2:1210.0.1.0 [2025-09-24 08:53:16.079] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:53:16.191] j-A [2025-09-24 08:53:23.546] The R5 Autosar Classic is running [2025-09-24 08:53:23.546] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:53:23.567] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:53:24.174] INIT: version 2.96 booting [2025-09-24 08:53:24.286] INIT: Entering runlevel: 5 [2025-09-24 08:53:24.446] mtd24 attached [2025-09-24 08:53:24.446] mtd28 attached [2025-09-24 08:53:24.462] mtd32 attached [2025-09-24 08:53:24.510] ubi0:textures is mounted. [2025-09-24 08:53:24.510] RTNETLINK answers: File exists [2025-09-24 08:53:24.575] ubi2:dml_code is mounted. [2025-09-24 08:53:24.575] ubi1:animations is mounted. [2025-09-24 08:53:24.575] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:53:24.575] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:53:24.575] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:53:24.575] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:53:24.575] data.LB_FadeInType0=100 [2025-09-24 08:53:24.575] data.CHLH_FadeInType0=0 [2025-09-24 08:53:24.575] data.WU_FadeInDelay=0 [2025-09-24 08:53:24.575] max_time_out=0 [2025-09-24 08:53:24.575] No splash screen [2025-09-24 08:53:24.575] stop dss Done [2025-09-24 08:53:24.575] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:53:24.607] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:53:24.647] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:53:24.647] /dev/mem opened. [2025-09-24 08:53:24.647] Memory mapped at address 0xffff94428000. [2025-09-24 08:53:24.647] Read at address 0x00600018 (0xffff94428018): 0x00000000 [2025-09-24 08:53:24.647] Write at address 0x00600018 (0xffff94428018): 0x00400040, readback 0x00400040 [2025-09-24 08:53:24.840] Loaded PowerVR consumer services. [2025-09-24 08:53:24.904] 512+0 records in [2025-09-24 08:53:24.904] 512+0 records out [2025-09-24 08:53:24.920] Waiting data available... [2025-09-24 08:53:24.952] Starting syslogd/klogd: done [2025-09-24 08:53:24.968] DML Start [2025-09-24 08:53:25.159] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:53:25.399] DML res1: 0 [2025-09-24 08:53:25.799] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:53:25.799] Read Success [2025-09-24 08:53:25.815] Verifying certificate... [2025-09-24 08:53:26.103] Verified OK [2025-09-24 08:53:26.119] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:53:27.796] Verified OK [2025-09-24 08:53:27.812] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:53:28.388] Verified OK [2025-09-24 08:53:28.388] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:53:30.882] fs.protected_hardlinks = 1 [2025-09-24 08:53:30.910] fs.protected_symlinks = 1 [2025-09-24 08:53:30.910] kernel.modules_disabled = 1 [2025-09-24 08:53:31.086] [2025-09-24 08:53:31.086] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:53:32.480] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:53:40.158] SBL1:1210.0.1.0 [2025-09-24 08:53:40.205] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:53:41.773] SBL2:1210.0.1.0 [2025-09-24 08:53:41.821] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:53:41.917] j-A [2025-09-24 08:53:49.272] The R5 Autosar Classic is running [2025-09-24 08:53:49.294] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:53:49.294] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:53:49.902] INIT: version 2.96 booting [2025-09-24 08:53:50.013] INIT: Entering runlevel: 5 [2025-09-24 08:53:50.158] mtd24 attached [2025-09-24 08:53:50.174] mtd28 attached [2025-09-24 08:53:50.190] mtd32 attached [2025-09-24 08:53:50.237] RTNETLINK answers: File exists [2025-09-24 08:53:50.300] ubi0:textures is mounted. [2025-09-24 08:53:50.300] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:53:50.300] ubi1:animations is mounted. [2025-09-24 08:53:50.300] ubi2:dml_code is mounted. [2025-09-24 08:53:50.300] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:53:50.300] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:53:50.300] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:53:50.300] data.LB_FadeInType0=100 [2025-09-24 08:53:50.300] data.CHLH_FadeInType0=0 [2025-09-24 08:53:50.300] data.WU_FadeInDelay=0 [2025-09-24 08:53:50.300] max_time_out=0 [2025-09-24 08:53:50.300] No splash screen [2025-09-24 08:53:50.300] stop dss Done [2025-09-24 08:53:50.300] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:53:50.317] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:53:50.366] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:53:50.366] /dev/mem opened. [2025-09-24 08:53:50.366] Memory mapped at address 0xffffa1870000. [2025-09-24 08:53:50.366] Read at address 0x00600018 (0xffffa1870018): 0x00000000 [2025-09-24 08:53:50.366] Write at address 0x00600018 (0xffffa1870018): 0x00400040, readback 0x00400040 [2025-09-24 08:53:50.574] Loaded PowerVR consumer services. [2025-09-24 08:53:50.636] 512+0 records in [2025-09-24 08:53:50.636] 512+0 records out [2025-09-24 08:53:50.636] Waiting data available... [2025-09-24 08:53:50.667] Starting syslogd/klogd: done [2025-09-24 08:53:50.683] DML Start [2025-09-24 08:53:50.875] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:53:51.083] DML res1: 0 [2025-09-24 08:53:51.563] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:53:51.578] Read Success [2025-09-24 08:53:51.578] Verifying certificate... [2025-09-24 08:53:51.802] Verified OK [2025-09-24 08:53:51.818] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:53:53.456] Verified OK [2025-09-24 08:53:53.456] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:53:54.093] Verified OK [2025-09-24 08:53:54.093] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:53:56.683] fs.protected_hardlinks = 1 [2025-09-24 08:53:56.699] fs.protected_symlinks = 1 [2025-09-24 08:53:56.699] kernel.modules_disabled = 1 [2025-09-24 08:53:56.906] [2025-09-24 08:53:56.906] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:53:58.193] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:54:05.859] SBL1:1210.0.1.0 [2025-09-24 08:54:05.907] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:54:07.474] SBL2:1210.0.1.0 [2025-09-24 08:54:07.522] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:54:07.617] j-A [2025-09-24 08:54:14.973] The R5 Autosar Classic is running [2025-09-24 08:54:14.994] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:54:14.994] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:54:15.603] INIT: version 2.96 booting [2025-09-24 08:54:15.714] INIT: Entering runlevel: 5 [2025-09-24 08:54:15.873] mtd28 attached [2025-09-24 08:54:15.873] mtd32 attached [2025-09-24 08:54:15.890] mtd24 attached [2025-09-24 08:54:15.922] ubi0:animations is mounted. [2025-09-24 08:54:15.938] ubi1:dml_code is mounted. [2025-09-24 08:54:16.003] RTNETLINK answers: File exists [2025-09-24 08:54:16.003] ubi2:textures is mounted. [2025-09-24 08:54:16.003] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:54:16.003] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:54:16.003] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:54:16.003] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:54:16.003] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:54:16.003] data.LB_FadeInType0=100 [2025-09-24 08:54:16.003] data.CHLH_FadeInType0=0 [2025-09-24 08:54:16.003] data.WU_FadeInDelay=0 [2025-09-24 08:54:16.003] max_time_out=0 [2025-09-24 08:54:16.003] No splash screen [2025-09-24 08:54:16.003] stop dss Done [2025-09-24 08:54:16.075] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:54:16.075] /dev/mem opened. [2025-09-24 08:54:16.075] Memory mapped at address 0xffffa10ca000. [2025-09-24 08:54:16.075] Read at address 0x00600018 (0xffffa10ca018): 0x00000000 [2025-09-24 08:54:16.075] Write at address 0x00600018 (0xffffa10ca018): 0x00400040, readback 0x00400040 [2025-09-24 08:54:16.075] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:54:16.251] Loaded PowerVR consumer services. [2025-09-24 08:54:16.298] 512+0 records in [2025-09-24 08:54:16.298] 512+0 records out [2025-09-24 08:54:16.346] Waiting data available... [2025-09-24 08:54:16.362] Starting syslogd/klogd: done [2025-09-24 08:54:16.378] DML Start [2025-09-24 08:54:16.538] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:54:16.730] DML res1: 0 [2025-09-24 08:54:17.210] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:54:17.237] Read Success [2025-09-24 08:54:17.237] Verifying certificate... [2025-09-24 08:54:17.493] Verified OK [2025-09-24 08:54:17.524] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:54:19.137] Verified OK [2025-09-24 08:54:19.137] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:54:19.774] Verified OK [2025-09-24 08:54:19.774] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:54:22.427] fs.protected_hardlinks = 1 [2025-09-24 08:54:22.427] fs.protected_symlinks = 1 [2025-09-24 08:54:22.443] kernel.modules_disabled = 1 [2025-09-24 08:54:22.635] [2025-09-24 08:54:22.635] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:54:23.863] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:54:31.568] SBL1:1210.0.1.0 [2025-09-24 08:54:31.616] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:54:33.182] SBL2:1210.0.1.0 [2025-09-24 08:54:33.214] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:54:33.327] j-A [2025-09-24 08:54:40.700] The R5 Autosar Classic is running [2025-09-24 08:54:40.700] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:54:40.700] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:54:41.308] INIT: version 2.96 booting [2025-09-24 08:54:41.419] INIT: Entering runlevel: 5 [2025-09-24 08:54:41.563] mtd24 attached [2025-09-24 08:54:41.579] mtd28 attached [2025-09-24 08:54:41.595] mtd32 attached [2025-09-24 08:54:41.611] ubi0:textures is mounted. [2025-09-24 08:54:41.643] RTNETLINK answers: File exists [2025-09-24 08:54:41.700] ubi1:animations is mounted. [2025-09-24 08:54:41.700] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:54:41.700] ubi2:dml_code is mounted. [2025-09-24 08:54:41.700] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:54:41.700] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:54:41.700] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:54:41.700] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:54:41.700] data.LB_FadeInType0=100 [2025-09-24 08:54:41.700] data.CHLH_FadeInType0=0 [2025-09-24 08:54:41.700] data.WU_FadeInDelay=0 [2025-09-24 08:54:41.700] max_time_out=0 [2025-09-24 08:54:41.700] No splash screen [2025-09-24 08:54:41.700] stop dss Done [2025-09-24 08:54:41.786] /dev/mem opened. [2025-09-24 08:54:41.786] Memory mapped at address 0xffff99c79000. [2025-09-24 08:54:41.786] Read at address 0x00600018 (0xffff99c79018): 0x00000000 [2025-09-24 08:54:41.786] Write at address 0x00600018 (0xffff99c79018): 0x00400040, readback 0x00400040 [2025-09-24 08:54:41.786] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:54:41.786] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:54:41.961] Loaded PowerVR consumer services. [2025-09-24 08:54:42.026] 512+0 records in [2025-09-24 08:54:42.026] 512+0 records out [2025-09-24 08:54:42.057] Waiting data available... [2025-09-24 08:54:42.073] Starting syslogd/klogd: done [2025-09-24 08:54:42.089] DML Start [2025-09-24 08:54:42.281] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:54:42.489] DML res1: 0 [2025-09-24 08:54:42.929] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:54:42.929] Read Success [2025-09-24 08:54:42.929] Verifying certificate... [2025-09-24 08:54:43.152] Verified OK [2025-09-24 08:54:43.168] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:54:44.718] Verified OK [2025-09-24 08:54:44.718] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:54:45.324] Verified OK [2025-09-24 08:54:45.324] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:54:48.119] fs.protected_hardlinks = 1 [2025-09-24 08:54:48.119] fs.protected_symlinks = 1 [2025-09-24 08:54:48.119] kernel.modules_disabled = 1 [2025-09-24 08:54:48.310] [2025-09-24 08:54:48.310] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:54:49.613] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:54:57.295] SBL1:1210.0.1.0 [2025-09-24 08:54:57.343] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:54:58.910] SBL2:1210.0.1.0 [2025-09-24 08:54:58.942] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:54:59.054] j-A [2025-09-24 08:55:06.430] The R5 Autosar Classic is running [2025-09-24 08:55:06.430] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:55:06.430] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:55:07.037] INIT: version 2.96 booting [2025-09-24 08:55:07.149] INIT: Entering runlevel: 5 [2025-09-24 08:55:07.309] mtd28 attached [2025-09-24 08:55:07.309] mtd24 attached [2025-09-24 08:55:07.325] mtd32 attached [2025-09-24 08:55:07.373] ubi0:animations is mounted. [2025-09-24 08:55:07.373] RTNETLINK answers: File exists [2025-09-24 08:55:07.389] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:55:07.389] ubi2:dml_code is mounted. [2025-09-24 08:55:07.438] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:55:07.438] ubi1:textures is mounted. [2025-09-24 08:55:07.438] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:55:07.438] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:55:07.438] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:55:07.438] data.LB_FadeInType0=100 [2025-09-24 08:55:07.438] data.CHLH_FadeInType0=0 [2025-09-24 08:55:07.438] data.WU_FadeInDelay=0 [2025-09-24 08:55:07.438] max_time_out=0 [2025-09-24 08:55:07.438] No splash screen [2025-09-24 08:55:07.438] stop dss Done [2025-09-24 08:55:07.530] /dev/mem opened. [2025-09-24 08:55:07.530] Memory mapped at address 0xffffbcd92000. [2025-09-24 08:55:07.530] Read at address 0x00600018 (0xffffbcd92018): 0x00000000 [2025-09-24 08:55:07.530] Write at address 0x00600018 (0xffffbcd92018): 0x00400040, readback 0x00400040 [2025-09-24 08:55:07.530] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:55:07.530] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:55:07.594] Loaded PowerVR consumer services. [2025-09-24 08:55:07.738] 512+0 records in [2025-09-24 08:55:07.738] 512+0 records out [2025-09-24 08:55:07.770] Waiting data available... [2025-09-24 08:55:07.786] Starting syslogd/klogd: done [2025-09-24 08:55:07.801] DML Start [2025-09-24 08:55:07.994] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:55:08.217] DML res1: 0 [2025-09-24 08:55:08.633] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:55:08.655] Read Success [2025-09-24 08:55:08.655] Verifying certificate... [2025-09-24 08:55:08.911] Verified OK [2025-09-24 08:55:08.926] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:55:10.691] Verified OK [2025-09-24 08:55:10.691] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:55:11.313] Verified OK [2025-09-24 08:55:11.313] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:55:13.855] fs.protected_hardlinks = 1 [2025-09-24 08:55:13.883] fs.protected_symlinks = 1 [2025-09-24 08:55:13.883] kernel.modules_disabled = 1 [2025-09-24 08:55:14.059] [2025-09-24 08:55:14.059] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:55:15.305] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:55:23.030] SBL1:1210.0.1.0 [2025-09-24 08:55:23.078] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:55:24.644] SBL2:1210.0.1.0 [2025-09-24 08:55:24.676] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:55:24.788] j-A [2025-09-24 08:55:32.161] The R5 Autosar Classic is running [2025-09-24 08:55:32.161] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:55:32.161] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:55:32.769] INIT: version 2.96 booting [2025-09-24 08:55:32.865] INIT: Entering runlevel: 5 [2025-09-24 08:55:33.024] mtd24 attached [2025-09-24 08:55:33.040] mtd32 attached [2025-09-24 08:55:33.056] mtd28 attached [2025-09-24 08:55:33.072] ubi0:textures is mounted. [2025-09-24 08:55:33.130] RTNETLINK answers: File exists [2025-09-24 08:55:33.130] ubi2:animations is mounted. [2025-09-24 08:55:33.130] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:55:33.130] ubi1:dml_code is mounted. [2025-09-24 08:55:33.130] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:55:33.130] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:55:33.130] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:55:33.159] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:55:33.159] data.LB_FadeInType0=100 [2025-09-24 08:55:33.159] data.CHLH_FadeInType0=0 [2025-09-24 08:55:33.159] data.WU_FadeInDelay=0 [2025-09-24 08:55:33.159] max_time_out=0 [2025-09-24 08:55:33.159] No splash screen [2025-09-24 08:55:33.159] stop dss Done [2025-09-24 08:55:33.237] /dev/mem opened. [2025-09-24 08:55:33.237] Memory mapped at address 0xffffbeeb4000. [2025-09-24 08:55:33.237] Read at address 0x00600018 (0xffffbeeb4018): 0x00000000 [2025-09-24 08:55:33.237] Write at address 0x00600018 (0xffffbeeb4018): 0x00400040, readback 0x00400040 [2025-09-24 08:55:33.237] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:55:33.237] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:55:33.348] Loaded PowerVR consumer services. [2025-09-24 08:55:33.460] 512+0 records in [2025-09-24 08:55:33.460] 512+0 records out [2025-09-24 08:55:33.476] Waiting data available... [2025-09-24 08:55:33.508] Starting syslogd/klogd: done [2025-09-24 08:55:33.540] DML Start [2025-09-24 08:55:33.716] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:55:33.940] DML res1: 0 [2025-09-24 08:55:34.431] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:55:34.431] Read Success [2025-09-24 08:55:34.431] Verifying certificate... [2025-09-24 08:55:34.671] Verified OK [2025-09-24 08:55:34.703] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:55:36.396] Verified OK [2025-09-24 08:55:36.396] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:55:36.995] Verified OK [2025-09-24 08:55:36.995] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:55:39.682] fs.protected_hardlinks = 1 [2025-09-24 08:55:39.697] fs.protected_symlinks = 1 [2025-09-24 08:55:39.713] kernel.modules_disabled = 1 [2025-09-24 08:55:39.905] [2025-09-24 08:55:39.905] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:55:41.041] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:55:48.743] SBL1:1210.0.1.0 [2025-09-24 08:55:48.775] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:55:50.357] SBL2:1210.0.1.0 [2025-09-24 08:55:50.390] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:55:50.486] j-A [2025-09-24 08:55:57.840] The R5 Autosar Classic is running [2025-09-24 08:55:57.865] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:55:57.865] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:55:58.472] INIT: version 2.96 booting [2025-09-24 08:55:58.584] INIT: Entering runlevel: 5 [2025-09-24 08:55:58.744] mtd28 attached [2025-09-24 08:55:58.744] mtd24 attached [2025-09-24 08:55:58.760] mtd32 attached [2025-09-24 08:55:58.847] RTNETLINK answers: File exists [2025-09-24 08:55:58.847] ubi1:textures is mounted. [2025-09-24 08:55:58.847] ubi0:animations is mounted. [2025-09-24 08:55:58.847] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:55:58.847] ubi2:dml_code is mounted. [2025-09-24 08:55:58.847] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:55:58.847] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:55:58.847] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:55:58.847] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:55:58.868] data.LB_FadeInType0=100 [2025-09-24 08:55:58.868] data.CHLH_FadeInType0=0 [2025-09-24 08:55:58.868] data.WU_FadeInDelay=0 [2025-09-24 08:55:58.868] max_time_out=0 [2025-09-24 08:55:58.868] No splash screen [2025-09-24 08:55:58.868] stop dss Done [2025-09-24 08:55:58.901] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:55:58.917] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:55:58.954] /dev/mem opened. [2025-09-24 08:55:58.954] Memory mapped at address 0xffff85223000. [2025-09-24 08:55:58.954] Read at address 0x00600018 (0xffff85223018): 0x00000000 [2025-09-24 08:55:58.954] Write at address 0x00600018 (0xffff85223018): 0x00400040, readback 0x00400040 [2025-09-24 08:55:59.034] Loaded PowerVR consumer services. [2025-09-24 08:55:59.177] 512+0 records in [2025-09-24 08:55:59.177] 512+0 records out [2025-09-24 08:55:59.193] Waiting data available... [2025-09-24 08:55:59.226] Starting syslogd/klogd: done [2025-09-24 08:55:59.242] DML Start [2025-09-24 08:55:59.418] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:55:59.658] DML res1: 0 [2025-09-24 08:56:00.128] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:56:00.128] Read Success [2025-09-24 08:56:00.128] Verifying certificate... [2025-09-24 08:56:00.368] Verified OK [2025-09-24 08:56:00.384] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:56:02.055] Verified OK [2025-09-24 08:56:02.055] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:56:02.692] Verified OK [2025-09-24 08:56:02.692] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:56:05.394] fs.protected_hardlinks = 1 [2025-09-24 08:56:05.410] fs.protected_symlinks = 1 [2025-09-24 08:56:05.410] kernel.modules_disabled = 1 [2025-09-24 08:56:05.617] [2025-09-24 08:56:05.617] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:56:06.742] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:56:14.447] SBL1:1210.0.1.0 [2025-09-24 08:56:14.495] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:56:16.061] SBL2:1210.0.1.0 [2025-09-24 08:56:16.109] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:56:16.205] j-A [2025-09-24 08:56:23.560] The R5 Autosar Classic is running [2025-09-24 08:56:23.582] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:56:23.582] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:56:24.188] INIT: version 2.96 booting [2025-09-24 08:56:24.300] INIT: Entering runlevel: 5 [2025-09-24 08:56:24.461] mtd24 attached [2025-09-24 08:56:24.461] mtd28 attached [2025-09-24 08:56:24.477] mtd32 attached [2025-09-24 08:56:24.508] ubi0:textures is mounted. [2025-09-24 08:56:24.593] RTNETLINK answers: File exists [2025-09-24 08:56:24.593] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:56:24.593] ubi1:animations is mounted. [2025-09-24 08:56:24.593] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:56:24.593] ubi2:dml_code is mounted. [2025-09-24 08:56:24.593] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:56:24.593] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:56:24.593] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:56:24.593] data.LB_FadeInType0=100 [2025-09-24 08:56:24.593] data.CHLH_FadeInType0=0 [2025-09-24 08:56:24.593] data.WU_FadeInDelay=0 [2025-09-24 08:56:24.593] max_time_out=0 [2025-09-24 08:56:24.593] No splash screen [2025-09-24 08:56:24.593] stop dss Done [2025-09-24 08:56:24.608] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:56:24.624] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:56:24.665] /dev/mem opened. [2025-09-24 08:56:24.665] Memory mapped at address 0xffff8034b000. [2025-09-24 08:56:24.665] Read at address 0x00600018 (0xffff8034b018): 0x00000000 [2025-09-24 08:56:24.665] Write at address 0x00600018 (0xffff8034b018): 0x00400040, readback 0x00400040 [2025-09-24 08:56:24.873] Loaded PowerVR consumer services. [2025-09-24 08:56:24.905] 512+0 records in [2025-09-24 08:56:24.905] 512+0 records out [2025-09-24 08:56:24.953] Waiting data available... [2025-09-24 08:56:24.953] Starting syslogd/klogd: done [2025-09-24 08:56:24.969] DML Start [2025-09-24 08:56:25.161] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:56:25.400] DML res1: 0 [2025-09-24 08:56:25.826] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:56:25.826] Read Success [2025-09-24 08:56:25.826] Verifying certificate... [2025-09-24 08:56:26.051] Verified OK [2025-09-24 08:56:26.067] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:56:27.822] Verified OK [2025-09-24 08:56:27.822] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:56:28.398] Verified OK [2025-09-24 08:56:28.398] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:56:31.052] fs.protected_hardlinks = 1 [2025-09-24 08:56:31.052] fs.protected_symlinks = 1 [2025-09-24 08:56:31.068] kernel.modules_disabled = 1 [2025-09-24 08:56:31.276] [2025-09-24 08:56:31.276] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:56:32.468] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:56:40.142] SBL1:1210.0.1.0 [2025-09-24 08:56:40.190] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:56:41.757] SBL2:1210.0.1.0 [2025-09-24 08:56:41.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:56:41.901] j-A [2025-09-24 08:56:49.255] The R5 Autosar Classic is running [2025-09-24 08:56:49.255] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:56:49.276] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:56:49.883] INIT: version 2.96 booting [2025-09-24 08:56:49.995] INIT: Entering runlevel: 5 [2025-09-24 08:56:50.155] mtd32 attached [2025-09-24 08:56:50.171] mtd28 attached [2025-09-24 08:56:50.171] mtd24 attached [2025-09-24 08:56:50.219] RTNETLINK answers: File exists [2025-09-24 08:56:50.288] ubi0:dml_code is mounted. [2025-09-24 08:56:50.288] ubi1:animations is mounted. [2025-09-24 08:56:50.288] ubi2:textures is mounted. [2025-09-24 08:56:50.288] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:56:50.288] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:56:50.288] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:56:50.288] data.LB_FadeInType0=100 [2025-09-24 08:56:50.288] data.CHLH_FadeInType0=0 [2025-09-24 08:56:50.288] data.WU_FadeInDelay=0 [2025-09-24 08:56:50.288] max_time_out=0 [2025-09-24 08:56:50.288] No splash screen [2025-09-24 08:56:50.288] stop dss Done [2025-09-24 08:56:50.288] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:56:50.288] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:56:50.356] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:56:50.356] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:56:50.356] /dev/mem opened. [2025-09-24 08:56:50.356] Memory mapped at address 0xffffaaf8c000. [2025-09-24 08:56:50.356] Read at address 0x00600018 (0xffffaaf8c018): 0x00000000 [2025-09-24 08:56:50.356] Write at address 0x00600018 (0xffffaaf8c018): 0x00400040, readback 0x00400040 [2025-09-24 08:56:50.548] Loaded PowerVR consumer services. [2025-09-24 08:56:50.611] 512+0 records in [2025-09-24 08:56:50.611] 512+0 records out [2025-09-24 08:56:50.628] Waiting data available... [2025-09-24 08:56:50.660] Starting syslogd/klogd: done [2025-09-24 08:56:50.676] DML Start [2025-09-24 08:56:50.835] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:56:51.044] DML res1: 0 [2025-09-24 08:56:51.508] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:56:51.508] Read Success [2025-09-24 08:56:51.523] Verifying certificate... [2025-09-24 08:56:51.779] Verified OK [2025-09-24 08:56:51.795] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:56:53.471] Verified OK [2025-09-24 08:56:53.471] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:56:54.046] Verified OK [2025-09-24 08:56:54.046] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:56:56.605] fs.protected_hardlinks = 1 [2025-09-24 08:56:56.621] fs.protected_symlinks = 1 [2025-09-24 08:56:56.621] kernel.modules_disabled = 1 [2025-09-24 08:56:56.813] [2025-09-24 08:56:56.813] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:56:58.155] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:57:05.865] SBL1:1210.0.1.0 [2025-09-24 08:57:05.897] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:57:07.479] SBL2:1210.0.1.0 [2025-09-24 08:57:07.511] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:57:07.607] j-A [2025-09-24 08:57:14.961] The R5 Autosar Classic is running [2025-09-24 08:57:14.986] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:57:14.986] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:57:15.594] INIT: version 2.96 booting [2025-09-24 08:57:15.705] INIT: Entering runlevel: 5 [2025-09-24 08:57:15.865] mtd28 attached [2025-09-24 08:57:15.865] mtd24 attached [2025-09-24 08:57:15.881] mtd32 attached [2025-09-24 08:57:15.930] ubi0:animations is mounted. [2025-09-24 08:57:15.930] RTNETLINK answers: File exists [2025-09-24 08:57:15.965] ubi2:dml_code is mounted. [2025-09-24 08:57:15.965] ubi1:textures is mounted. [2025-09-24 08:57:15.965] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:57:15.965] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:57:15.965] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:57:15.965] data.LB_FadeInType0=100 [2025-09-24 08:57:15.999] data.CHLH_FadeInType0=0 [2025-09-24 08:57:15.999] data.WU_FadeInDelay=0 [2025-09-24 08:57:15.999] max_time_out=0 [2025-09-24 08:57:15.999] No splash screen [2025-09-24 08:57:15.999] stop dss Done [2025-09-24 08:57:15.999] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:57:15.999] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:57:16.063] /dev/mem opened. [2025-09-24 08:57:16.063] Memory mapped at address 0xffffa8fdf000. [2025-09-24 08:57:16.063] Read at address 0x00600018 (0xffffa8fdf018): 0x00000000 [2025-09-24 08:57:16.063] Write at address 0x00600018 (0xffffa8fdf018): 0x00400040, readback 0x00400040 [2025-09-24 08:57:16.079] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:57:16.109] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:57:16.174] Loaded PowerVR consumer services. [2025-09-24 08:57:16.315] Waiting data available... [2025-09-24 08:57:16.315] 512+0 records in [2025-09-24 08:57:16.315] 512+0 records out [2025-09-24 08:57:16.331] Starting syslogd/klogd: done [2025-09-24 08:57:16.346] DML Start [2025-09-24 08:57:16.555] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:57:16.795] DML res1: 0 [2025-09-24 08:57:17.194] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:57:17.194] Read Success [2025-09-24 08:57:17.210] Verifying certificate... [2025-09-24 08:57:17.434] Verified OK [2025-09-24 08:57:17.467] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:57:19.221] Verified OK [2025-09-24 08:57:19.221] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:57:19.812] Verified OK [2025-09-24 08:57:19.812] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:57:22.306] fs.protected_hardlinks = 1 [2025-09-24 08:57:22.322] fs.protected_symlinks = 1 [2025-09-24 08:57:22.338] kernel.modules_disabled = 1 [2025-09-24 08:57:22.531] [2025-09-24 08:57:22.531] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:57:23.876] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:57:31.590] SBL1:1210.0.1.0 [2025-09-24 08:57:31.639] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:57:33.206] SBL2:1210.0.1.0 [2025-09-24 08:57:33.254] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:57:33.349] j-A [2025-09-24 08:57:40.703] The R5 Autosar Classic is running [2025-09-24 08:57:40.729] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:57:40.729] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:57:41.336] INIT: version 2.96 booting [2025-09-24 08:57:41.447] INIT: Entering runlevel: 5 [2025-09-24 08:57:41.608] mtd24 attached [2025-09-24 08:57:41.608] mtd28 attached [2025-09-24 08:57:41.623] mtd32 attached [2025-09-24 08:57:41.728] ubi0:textures is mounted. [2025-09-24 08:57:41.728] RTNETLINK answers: File exists [2025-09-24 08:57:41.728] ubi1:animations is mounted. [2025-09-24 08:57:41.728] ubi2:dml_code is mounted. [2025-09-24 08:57:41.728] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:57:41.728] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:57:41.728] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:57:41.728] data.LB_FadeInType0=100 [2025-09-24 08:57:41.728] data.CHLH_FadeInType0=0 [2025-09-24 08:57:41.728] data.WU_FadeInDelay=0 [2025-09-24 08:57:41.728] max_time_out=0 [2025-09-24 08:57:41.728] No splash screen [2025-09-24 08:57:41.728] stop dss Done [2025-09-24 08:57:41.728] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:57:41.728] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:57:41.814] /dev/mem opened. [2025-09-24 08:57:41.814] Memory mapped at address 0xffff82026000. [2025-09-24 08:57:41.814] Read at address 0x00600018 (0xffff82026018): 0x00000000 [2025-09-24 08:57:41.814] Write at address 0x00600018 (0xffff82026018): 0x00400040, readback 0x00400040 [2025-09-24 08:57:41.814] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:57:41.814] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:57:41.893] Loaded PowerVR consumer services. [2025-09-24 08:57:42.038] 512+0 records in [2025-09-24 08:57:42.038] 512+0 records out [2025-09-24 08:57:42.053] Waiting data available... [2025-09-24 08:57:42.085] Starting syslogd/klogd: done [2025-09-24 08:57:42.101] DML Start [2025-09-24 08:57:42.293] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:57:42.533] DML res1: 0 [2025-09-24 08:57:42.932] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:57:42.932] Read Success [2025-09-24 08:57:42.932] Verifying certificate... [2025-09-24 08:57:43.155] Verified OK [2025-09-24 08:57:43.187] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:57:44.718] Verified OK [2025-09-24 08:57:44.718] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:57:45.449] Verified OK [2025-09-24 08:57:45.449] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:57:48.183] fs.protected_hardlinks = 1 [2025-09-24 08:57:48.198] fs.protected_symlinks = 1 [2025-09-24 08:57:48.198] kernel.modules_disabled = 1 [2025-09-24 08:57:48.407] [2025-09-24 08:57:48.407] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:57:49.621] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:57:57.292] SBL1:1210.0.1.0 [2025-09-24 08:57:57.340] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:57:58.907] SBL2:1210.0.1.0 [2025-09-24 08:57:58.954] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:57:59.050] j-A [2025-09-24 08:58:06.404] The R5 Autosar Classic is running [2025-09-24 08:58:06.426] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:58:06.426] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:58:07.033] INIT: version 2.96 booting [2025-09-24 08:58:07.144] INIT: Entering runlevel: 5 [2025-09-24 08:58:07.289] mtd24 attached [2025-09-24 08:58:07.305] mtd28 attached [2025-09-24 08:58:07.320] mtd32 attached [2025-09-24 08:58:07.368] RTNETLINK answers: File exists [2025-09-24 08:58:07.430] ubi0:textures is mounted. [2025-09-24 08:58:07.430] ubi1:animations is mounted. [2025-09-24 08:58:07.430] ubi2:dml_code is mounted. [2025-09-24 08:58:07.430] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:58:07.430] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:58:07.430] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:58:07.430] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:58:07.430] data.LB_FadeInType0=100 [2025-09-24 08:58:07.430] data.CHLH_FadeInType0=0 [2025-09-24 08:58:07.430] data.WU_FadeInDelay=0 [2025-09-24 08:58:07.430] max_time_out=0 [2025-09-24 08:58:07.430] No splash screen [2025-09-24 08:58:07.430] stop dss Done [2025-09-24 08:58:07.430] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:58:07.496] /dev/mem opened. [2025-09-24 08:58:07.496] Memory mapped at address 0xffff94878000. [2025-09-24 08:58:07.496] Read at address 0x00600018 (0xffff94878018): 0x00000000 [2025-09-24 08:58:07.496] Write at address 0x00600018 (0xffff94878018): 0x00400040, readback 0x00400040 [2025-09-24 08:58:07.512] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:58:07.528] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:58:07.639] Loaded PowerVR consumer services. [2025-09-24 08:58:07.764] Waiting data available... [2025-09-24 08:58:07.764] 512+0 records in [2025-09-24 08:58:07.764] 512+0 records out [2025-09-24 08:58:07.797] Starting syslogd/klogd: done [2025-09-24 08:58:07.813] DML Start [2025-09-24 08:58:07.988] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:58:08.212] DML res1: 0 [2025-09-24 08:58:08.676] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:58:08.676] Read Success [2025-09-24 08:58:08.692] Verifying certificate... [2025-09-24 08:58:08.915] Verified OK [2025-09-24 08:58:08.931] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:58:10.584] Verified OK [2025-09-24 08:58:10.584] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:58:11.240] Verified OK [2025-09-24 08:58:11.240] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:58:13.894] fs.protected_hardlinks = 1 [2025-09-24 08:58:13.909] fs.protected_symlinks = 1 [2025-09-24 08:58:13.909] kernel.modules_disabled = 1 [2025-09-24 08:58:14.086] [2025-09-24 08:58:14.086] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:58:15.326] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:58:23.011] SBL1:1210.0.1.0 [2025-09-24 08:58:23.059] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:58:24.625] SBL2:1210.0.1.0 [2025-09-24 08:58:24.657] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:58:24.769] j-A [2025-09-24 08:58:32.142] The R5 Autosar Classic is running [2025-09-24 08:58:32.142] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:58:32.143] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:58:32.750] INIT: version 2.96 booting [2025-09-24 08:58:32.861] INIT: Entering runlevel: 5 [2025-09-24 08:58:33.005] mtd24 attached [2025-09-24 08:58:33.021] mtd28 attached [2025-09-24 08:58:33.038] mtd32 attached [2025-09-24 08:58:33.144] RTNETLINK answers: File exists [2025-09-24 08:58:33.144] ubi1:animations is mounted. [2025-09-24 08:58:33.144] ubi0:textures is mounted. [2025-09-24 08:58:33.144] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:58:33.144] ubi2:dml_code is mounted. [2025-09-24 08:58:33.145] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:58:33.145] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:58:33.145] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:58:33.145] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:58:33.145] data.LB_FadeInType0=100 [2025-09-24 08:58:33.145] data.CHLH_FadeInType0=0 [2025-09-24 08:58:33.145] data.WU_FadeInDelay=0 [2025-09-24 08:58:33.145] max_time_out=0 [2025-09-24 08:58:33.145] No splash screen [2025-09-24 08:58:33.145] stop dss Done [2025-09-24 08:58:33.233] /dev/mem opened. [2025-09-24 08:58:33.233] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:58:33.233] Memory mapped at address 0xffff9c488000. [2025-09-24 08:58:33.233] Read at address 0x00600018 (0xffff9c488018): 0x00000000 [2025-09-24 08:58:33.233] Write at address 0x00600018 (0xffff9c488018): 0x00400040, readback 0x00400040 [2025-09-24 08:58:33.233] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:58:33.426] Loaded PowerVR consumer services. [2025-09-24 08:58:33.441] 512+0 records in [2025-09-24 08:58:33.441] 512+0 records out [2025-09-24 08:58:33.505] Starting syslogd/klogd: Waiting data available... [2025-09-24 08:58:33.521] done [2025-09-24 08:58:33.521] DML Start [2025-09-24 08:58:33.681] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:58:33.905] DML res1: 0 [2025-09-24 08:58:34.378] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:58:34.378] Read Success [2025-09-24 08:58:34.378] Verifying certificate... [2025-09-24 08:58:34.618] Verified OK [2025-09-24 08:58:34.634] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:58:36.356] Verified OK [2025-09-24 08:58:36.356] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:58:36.948] Verified OK [2025-09-24 08:58:36.964] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:58:39.602] fs.protected_hardlinks = 1 [2025-09-24 08:58:39.602] fs.protected_symlinks = 1 [2025-09-24 08:58:39.618] kernel.modules_disabled = 1 [2025-09-24 08:58:39.810] [2025-09-24 08:58:39.810] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:58:41.008] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:58:48.707] SBL1:1210.0.1.0 [2025-09-24 08:58:48.755] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:58:50.321] SBL2:1210.0.1.0 [2025-09-24 08:58:50.369] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:58:50.465] j-A [2025-09-24 08:58:57.819] The R5 Autosar Classic is running [2025-09-24 08:58:57.843] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:58:57.843] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:58:58.450] INIT: version 2.96 booting [2025-09-24 08:58:58.561] INIT: Entering runlevel: 5 [2025-09-24 08:58:58.721] mtd24 attached [2025-09-24 08:58:58.737] mtd32 attached [2025-09-24 08:58:58.737] mtd28 attached [2025-09-24 08:58:58.753] ubi0:textures is mounted. [2025-09-24 08:58:58.785] RTNETLINK answers: File exists [2025-09-24 08:58:58.844] ubi1:dml_code is mounted. [2025-09-24 08:58:58.844] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:58:58.844] ubi2:animations is mounted. [2025-09-24 08:58:58.844] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:58:58.844] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:58:58.844] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:58:58.844] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:58:58.844] data.LB_FadeInType0=100 [2025-09-24 08:58:58.844] data.CHLH_FadeInType0=0 [2025-09-24 08:58:58.844] data.WU_FadeInDelay=0 [2025-09-24 08:58:58.844] max_time_out=0 [2025-09-24 08:58:58.844] No splash screen [2025-09-24 08:58:58.844] stop dss Done [2025-09-24 08:58:58.935] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:58:58.935] /dev/mem opened. [2025-09-24 08:58:58.935] Memory mapped at address 0xffff92b25000. [2025-09-24 08:58:58.935] Read at address 0x00600018 (0xffff92b25018): 0x00000000 [2025-09-24 08:58:58.935] Write at address 0x00600018 (0xffff92b25018): 0x00400040, readback 0x00400040 [2025-09-24 08:58:58.935] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:58:58.999] Loaded PowerVR consumer services. [2025-09-24 08:58:59.170] 512+0 records in [2025-09-24 08:58:59.170] 512+0 records out [2025-09-24 08:58:59.170] Waiting data available... [2025-09-24 08:58:59.186] Starting syslogd/klogd: done [2025-09-24 08:58:59.201] DML Start [2025-09-24 08:58:59.410] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:58:59.602] DML res1: 0 [2025-09-24 08:59:00.033] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:59:00.049] Read Success [2025-09-24 08:59:00.049] Verifying certificate... [2025-09-24 08:59:00.321] Verified OK [2025-09-24 08:59:00.353] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:59:02.063] Verified OK [2025-09-24 08:59:02.079] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:59:02.687] Verified OK [2025-09-24 08:59:02.687] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:59:05.277] fs.protected_hardlinks = 1 [2025-09-24 08:59:05.277] fs.protected_symlinks = 1 [2025-09-24 08:59:05.293] kernel.modules_disabled = 1 [2025-09-24 08:59:05.485] [2025-09-24 08:59:05.485] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:59:06.711] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:59:14.417] SBL1:1210.0.1.0 [2025-09-24 08:59:14.464] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:59:16.031] SBL2:1210.0.1.0 [2025-09-24 08:59:16.079] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:59:16.175] j-A [2025-09-24 08:59:23.550] The R5 Autosar Classic is running [2025-09-24 08:59:23.550] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:59:23.550] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:59:24.158] INIT: version 2.96 booting [2025-09-24 08:59:24.269] INIT: Entering runlevel: 5 [2025-09-24 08:59:24.413] mtd24 attached [2025-09-24 08:59:24.429] mtd28 attached [2025-09-24 08:59:24.445] mtd32 attached [2025-09-24 08:59:24.493] ubi0:textures is mounted. [2025-09-24 08:59:24.493] RTNETLINK answers: File exists [2025-09-24 08:59:24.559] ubi1:animations is mounted. [2025-09-24 08:59:24.559] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:59:24.559] ubi2:dml_code is mounted. [2025-09-24 08:59:24.559] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:59:24.559] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:59:24.559] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:59:24.559] data.LB_FadeInType0=100 [2025-09-24 08:59:24.559] data.CHLH_FadeInType0=0 [2025-09-24 08:59:24.559] data.WU_FadeInDelay=0 [2025-09-24 08:59:24.559] max_time_out=0 [2025-09-24 08:59:24.559] No splash screen [2025-09-24 08:59:24.559] stop dss Done [2025-09-24 08:59:24.559] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:59:24.607] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:59:24.640] /dev/mem opened. [2025-09-24 08:59:24.640] Memory mapped at address 0xffff874c9000. [2025-09-24 08:59:24.640] Read at address 0x00600018 (0xffff874c9018): 0x00000000 [2025-09-24 08:59:24.640] Write at address 0x00600018 (0xffff874c9018): 0x00400040, readback 0x00400040 [2025-09-24 08:59:24.640] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:59:24.815] Loaded PowerVR consumer services. [2025-09-24 08:59:24.864] 512+0 records in [2025-09-24 08:59:24.864] 512+0 records out [2025-09-24 08:59:24.896] Waiting data available... [2025-09-24 08:59:24.896] Starting syslogd/klogd: done [2025-09-24 08:59:24.928] DML Start [2025-09-24 08:59:25.103] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:59:25.311] DML res1: 0 [2025-09-24 08:59:25.807] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:59:25.828] Read Success [2025-09-24 08:59:25.828] Verifying certificate... [2025-09-24 08:59:26.052] Verified OK [2025-09-24 08:59:26.068] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:59:27.898] Verified OK [2025-09-24 08:59:27.898] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:59:28.502] Verified OK [2025-09-24 08:59:28.502] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:59:30.980] fs.protected_hardlinks = 1 [2025-09-24 08:59:31.009] fs.protected_symlinks = 1 [2025-09-24 08:59:31.009] kernel.modules_disabled = 1 [2025-09-24 08:59:31.201] [2025-09-24 08:59:31.201] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:59:32.389] RTNETLINK answers: Cannot assign requested address [2025-09-24 08:59:40.104] SBL1:1210.0.1.0 [2025-09-24 08:59:40.136] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:59:41.718] SBL2:1210.0.1.0 [2025-09-24 08:59:41.750] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 08:59:41.863] j-A [2025-09-24 08:59:49.235] The R5 Autosar Classic is running [2025-09-24 08:59:49.235] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 08:59:49.235] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 08:59:49.843] INIT: version 2.96 booting [2025-09-24 08:59:49.954] INIT: Entering runlevel: 5 [2025-09-24 08:59:50.114] mtd28 attached [2025-09-24 08:59:50.114] mtd24 attached [2025-09-24 08:59:50.130] mtd32 attached [2025-09-24 08:59:50.162] ubi0:animations is mounted. [2025-09-24 08:59:50.178] ubi1:textures is mounted. [2025-09-24 08:59:50.215] RTNETLINK answers: File exists [2025-09-24 08:59:50.215] ubi2:dml_code is mounted. [2025-09-24 08:59:50.215] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 08:59:50.215] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 08:59:50.215] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 08:59:50.215] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 08:59:50.247] data.LB_FadeInType0=100 [2025-09-24 08:59:50.247] data.CHLH_FadeInType0=0 [2025-09-24 08:59:50.247] data.WU_FadeInDelay=0 [2025-09-24 08:59:50.247] max_time_out=0 [2025-09-24 08:59:50.247] No splash screen [2025-09-24 08:59:50.247] stop dss Done [2025-09-24 08:59:50.247] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 08:59:50.280] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 08:59:50.322] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 08:59:50.322] /dev/mem opened. [2025-09-24 08:59:50.322] Memory mapped at address 0xffffa6ffe000. [2025-09-24 08:59:50.322] Read at address 0x00600018 (0xffffa6ffe018): 0x00000000 [2025-09-24 08:59:50.322] Write at address 0x00600018 (0xffffa6ffe018): 0x00400040, readback 0x00400040 [2025-09-24 08:59:50.449] Loaded PowerVR consumer services. [2025-09-24 08:59:50.587] Waiting data available... [2025-09-24 08:59:50.587] 512+0 records in [2025-09-24 08:59:50.587] 512+0 records out [2025-09-24 08:59:50.603] Starting syslogd/klogd: done [2025-09-24 08:59:50.619] DML Start [2025-09-24 08:59:50.810] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 08:59:51.018] DML res1: 0 [2025-09-24 08:59:51.497] Read DML Algo certificate (mtd31) and save to file [2025-09-24 08:59:51.513] Read Success [2025-09-24 08:59:51.513] Verifying certificate... [2025-09-24 08:59:51.769] Verified OK [2025-09-24 08:59:51.785] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 08:59:53.590] Verified OK [2025-09-24 08:59:53.590] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 08:59:54.101] Verified OK [2025-09-24 08:59:54.101] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 08:59:56.594] fs.protected_hardlinks = 1 [2025-09-24 08:59:56.594] fs.protected_symlinks = 1 [2025-09-24 08:59:56.610] kernel.modules_disabled = 1 [2025-09-24 08:59:56.803] [2025-09-24 08:59:56.803] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 08:59:58.089] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:00:05.810] SBL1:1210.0.1.0 [2025-09-24 09:00:05.858] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:00:07.424] SBL2:1210.0.1.0 [2025-09-24 09:00:07.473] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:00:07.569] j-A [2025-09-24 09:00:14.923] The R5 Autosar Classic is running [2025-09-24 09:00:14.945] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:00:14.945] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:00:15.552] INIT: version 2.96 booting [2025-09-24 09:00:15.665] INIT: Entering runlevel: 5 [2025-09-24 09:00:15.824] mtd24 attached [2025-09-24 09:00:15.824] mtd28 attached [2025-09-24 09:00:15.840] mtd32 attached [2025-09-24 09:00:15.888] ubi0:textures is mounted. [2025-09-24 09:00:15.888] RTNETLINK answers: File exists [2025-09-24 09:00:15.947] ubi1:animations is mounted. [2025-09-24 09:00:15.947] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:00:15.947] ubi2:dml_code is mounted. [2025-09-24 09:00:15.947] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:00:15.947] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:00:15.947] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:00:15.947] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:00:15.947] data.LB_FadeInType0=100 [2025-09-24 09:00:15.947] data.CHLH_FadeInType0=0 [2025-09-24 09:00:15.947] data.WU_FadeInDelay=0 [2025-09-24 09:00:15.947] max_time_out=0 [2025-09-24 09:00:15.947] No splash screen [2025-09-24 09:00:15.947] stop dss Done [2025-09-24 09:00:16.012] /dev/mem opened. [2025-09-24 09:00:16.012] Memory mapped at address 0xffff9c6dc000. [2025-09-24 09:00:16.012] Read at address 0x00600018 (0xffff9c6dc018): 0x00000000 [2025-09-24 09:00:16.012] Write at address 0x00600018 (0xffff9c6dc018): 0x00400040, readback 0x00400040 [2025-09-24 09:00:16.028] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:00:16.044] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:00:16.172] Loaded PowerVR consumer services. [2025-09-24 09:00:16.268] 512+0 records in [2025-09-24 09:00:16.268] 512+0 records out [2025-09-24 09:00:16.300] Waiting data available... [2025-09-24 09:00:16.316] Starting syslogd/klogd: done [2025-09-24 09:00:16.332] DML Start [2025-09-24 09:00:16.508] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:00:16.715] DML res1: 0 [2025-09-24 09:00:17.179] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:00:17.195] Read Success [2025-09-24 09:00:17.195] Verifying certificate... [2025-09-24 09:00:17.419] Verified OK [2025-09-24 09:00:17.434] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:00:19.086] Verified OK [2025-09-24 09:00:19.086] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:00:19.710] Verified OK [2025-09-24 09:00:19.710] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:00:22.267] fs.protected_hardlinks = 1 [2025-09-24 09:00:22.283] fs.protected_symlinks = 1 [2025-09-24 09:00:22.283] kernel.modules_disabled = 1 [2025-09-24 09:00:22.491] [2025-09-24 09:00:22.491] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:00:23.858] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:00:31.520] SBL1:1210.0.1.0 [2025-09-24 09:00:31.552] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:00:33.135] SBL2:1210.0.1.0 [2025-09-24 09:00:33.167] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:00:33.279] j-A [2025-09-24 09:00:40.618] The R5 Autosar Classic is running [2025-09-24 09:00:40.649] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:00:40.649] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:00:41.256] INIT: version 2.96 booting [2025-09-24 09:00:41.368] INIT: Entering runlevel: 5 [2025-09-24 09:00:41.528] mtd28 attached [2025-09-24 09:00:41.528] mtd32 attached [2025-09-24 09:00:41.544] mtd24 attached [2025-09-24 09:00:41.592] RTNETLINK answers: File exists [2025-09-24 09:00:41.658] ubi0:animations is mounted. [2025-09-24 09:00:41.658] ubi2:textures is mounted. [2025-09-24 09:00:41.658] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:00:41.658] ubi1:dml_code is mounted. [2025-09-24 09:00:41.658] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:00:41.658] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:00:41.658] data.LB_FadeInType0=100 [2025-09-24 09:00:41.658] data.CHLH_FadeInType0=0 [2025-09-24 09:00:41.658] data.WU_FadeInDelay=0 [2025-09-24 09:00:41.658] max_time_out=0 [2025-09-24 09:00:41.658] No splash screen [2025-09-24 09:00:41.658] stop dss Done [2025-09-24 09:00:41.658] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:00:41.658] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:00:41.716] /dev/mem opened. [2025-09-24 09:00:41.716] Memory mapped at address 0xffffbcaba000. [2025-09-24 09:00:41.716] Read at address 0x00600018 (0xffffbcaba018): 0x00000000 [2025-09-24 09:00:41.716] Write at address 0x00600018 (0xffffbcaba018): 0x00400040, readback 0x00400040 [2025-09-24 09:00:41.732] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:00:41.732] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:00:41.891] Loaded PowerVR consumer services. [2025-09-24 09:00:42.009] Waiting data available... [2025-09-24 09:00:42.009] 512+0 records in [2025-09-24 09:00:42.009] 512+0 records out [2025-09-24 09:00:42.041] Starting syslogd/klogd: done [2025-09-24 09:00:42.073] DML Start [2025-09-24 09:00:42.232] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:00:42.456] DML res1: 0 [2025-09-24 09:00:42.904] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:00:42.925] Read Success [2025-09-24 09:00:42.925] Verifying certificate... [2025-09-24 09:00:43.149] Verified OK [2025-09-24 09:00:43.181] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:00:44.778] Verified OK [2025-09-24 09:00:44.778] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:00:45.434] Verified OK [2025-09-24 09:00:45.450] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:00:48.135] fs.protected_hardlinks = 1 [2025-09-24 09:00:48.151] fs.protected_symlinks = 1 [2025-09-24 09:00:48.151] kernel.modules_disabled = 1 [2025-09-24 09:00:48.344] [2025-09-24 09:00:48.344] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:00:49.494] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:00:57.231] SBL1:1210.0.1.0 [2025-09-24 09:00:57.263] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:00:58.845] SBL2:1210.0.1.0 [2025-09-24 09:00:58.878] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:00:58.990] j-A [2025-09-24 09:01:06.360] The R5 Autosar Classic is running [2025-09-24 09:01:06.360] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:01:06.360] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:01:06.967] INIT: version 2.96 booting [2025-09-24 09:01:07.078] INIT: Entering runlevel: 5 [2025-09-24 09:01:07.239] mtd24 attached [2025-09-24 09:01:07.239] mtd28 attached [2025-09-24 09:01:07.255] mtd32 attached [2025-09-24 09:01:07.303] ubi0:textures is mounted. [2025-09-24 09:01:07.352] RTNETLINK answers: File exists [2025-09-24 09:01:07.352] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:01:07.352] ubi2:dml_code is mounted. [2025-09-24 09:01:07.352] ubi1:animations is mounted. [2025-09-24 09:01:07.352] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:01:07.352] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:01:07.352] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:01:07.352] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:01:07.374] data.LB_FadeInType0=100 [2025-09-24 09:01:07.374] data.CHLH_FadeInType0=0 [2025-09-24 09:01:07.374] data.WU_FadeInDelay=0 [2025-09-24 09:01:07.374] max_time_out=0 [2025-09-24 09:01:07.374] No splash screen [2025-09-24 09:01:07.374] stop dss Done [2025-09-24 09:01:07.451] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:01:07.451] /dev/mem opened. [2025-09-24 09:01:07.451] Memory mapped at address 0xffffbe9e7000. [2025-09-24 09:01:07.451] Read at address 0x00600018 (0xffffbe9e7018): 0x00000000 [2025-09-24 09:01:07.451] Write at address 0x00600018 (0xffffbe9e7018): 0x00400040, readback 0x00400040 [2025-09-24 09:01:07.451] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:01:07.627] Loaded PowerVR consumer services. [2025-09-24 09:01:07.691] 512+0 records in [2025-09-24 09:01:07.691] 512+0 records out [2025-09-24 09:01:07.707] Waiting data available... [2025-09-24 09:01:07.723] Starting syslogd/klogd: done [2025-09-24 09:01:07.739] DML Start [2025-09-24 09:01:07.947] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:01:08.171] DML res1: 0 [2025-09-24 09:01:08.592] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:01:08.592] Read Success [2025-09-24 09:01:08.592] Verifying certificate... [2025-09-24 09:01:08.864] Verified OK [2025-09-24 09:01:08.880] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:01:10.407] Verified OK [2025-09-24 09:01:10.407] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:01:11.029] Verified OK [2025-09-24 09:01:11.029] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:01:13.683] fs.protected_hardlinks = 1 [2025-09-24 09:01:13.699] fs.protected_symlinks = 1 [2025-09-24 09:01:13.715] kernel.modules_disabled = 1 [2025-09-24 09:01:13.891] [2025-09-24 09:01:13.891] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:01:15.275] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:01:22.949] SBL1:1210.0.1.0 [2025-09-24 09:01:22.981] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:01:24.563] SBL2:1210.0.1.0 [2025-09-24 09:01:24.595] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:01:24.707] j-A [2025-09-24 09:01:32.046] The R5 Autosar Classic is running [2025-09-24 09:01:32.077] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:01:32.077] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:01:32.685] INIT: version 2.96 booting [2025-09-24 09:01:32.797] INIT: Entering runlevel: 5 [2025-09-24 09:01:32.940] mtd24 attached [2025-09-24 09:01:32.956] mtd28 attached [2025-09-24 09:01:32.972] mtd32 attached [2025-09-24 09:01:33.020] ubi0:textures is mounted. [2025-09-24 09:01:33.020] RTNETLINK answers: File exists [2025-09-24 09:01:33.061] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:01:33.061] ubi2:dml_code is mounted. [2025-09-24 09:01:33.061] ubi1:animations is mounted. [2025-09-24 09:01:33.061] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:01:33.061] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:01:33.061] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:01:33.061] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:01:33.082] data.LB_FadeInType0=100 [2025-09-24 09:01:33.082] data.CHLH_FadeInType0=0 [2025-09-24 09:01:33.082] data.WU_FadeInDelay=0 [2025-09-24 09:01:33.082] max_time_out=0 [2025-09-24 09:01:33.082] No splash screen [2025-09-24 09:01:33.082] stop dss Done [2025-09-24 09:01:33.114] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:01:33.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:01:33.151] /dev/mem opened. [2025-09-24 09:01:33.151] Memory mapped at address 0xffff9f5ba000. [2025-09-24 09:01:33.151] Read at address 0x00600018 (0xffff9f5ba018): 0x00000000 [2025-09-24 09:01:33.151] Write at address 0x00600018 (0xffff9f5ba018): 0x00400040, readback 0x00400040 [2025-09-24 09:01:33.390] Loaded PowerVR consumer services. [2025-09-24 09:01:33.406] Waiting data available... [2025-09-24 09:01:33.422] 512+0 records in [2025-09-24 09:01:33.422] 512+0 records out [2025-09-24 09:01:33.438] Starting syslogd/klogd: done [2025-09-24 09:01:33.454] DML Start [2025-09-24 09:01:33.614] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:01:33.870] DML res1: 0 [2025-09-24 09:01:34.254] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:01:34.274] Read Success [2025-09-24 09:01:34.274] Verifying certificate... [2025-09-24 09:01:34.514] Verified OK [2025-09-24 09:01:34.530] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:01:36.184] Verified OK [2025-09-24 09:01:36.184] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:01:36.802] Verified OK [2025-09-24 09:01:36.802] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:01:39.392] fs.protected_hardlinks = 1 [2025-09-24 09:01:39.408] fs.protected_symlinks = 1 [2025-09-24 09:01:39.408] kernel.modules_disabled = 1 [2025-09-24 09:01:39.615] [2025-09-24 09:01:39.615] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:01:40.970] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:01:48.688] SBL1:1210.0.1.0 [2025-09-24 09:01:48.736] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:01:50.303] SBL2:1210.0.1.0 [2025-09-24 09:01:50.335] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:01:50.447] j-A [2025-09-24 09:01:57.802] The R5 Autosar Classic is running [2025-09-24 09:01:57.802] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:01:57.823] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:01:58.430] INIT: version 2.96 booting [2025-09-24 09:01:58.542] INIT: Entering runlevel: 5 [2025-09-24 09:01:58.702] mtd24 attached [2025-09-24 09:01:58.702] mtd28 attached [2025-09-24 09:01:58.718] mtd32 attached [2025-09-24 09:01:58.767] RTNETLINK answers: File exists [2025-09-24 09:01:58.833] ubi0:textures is mounted. [2025-09-24 09:01:58.833] ubi1:animations is mounted. [2025-09-24 09:01:58.833] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:01:58.833] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:01:58.833] ubi2:dml_code is mounted. [2025-09-24 09:01:58.833] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:01:58.833] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:01:58.833] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:01:58.833] data.LB_FadeInType0=100 [2025-09-24 09:01:58.833] data.CHLH_FadeInType0=0 [2025-09-24 09:01:58.833] data.WU_FadeInDelay=0 [2025-09-24 09:01:58.833] max_time_out=0 [2025-09-24 09:01:58.833] No splash screen [2025-09-24 09:01:58.833] stop dss Done [2025-09-24 09:01:58.848] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:01:58.870] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:01:58.904] /dev/mem opened. [2025-09-24 09:01:58.904] Memory mapped at address 0xffffb7533000. [2025-09-24 09:01:58.904] Read at address 0x00600018 (0xffffb7533018): 0x00000000 [2025-09-24 09:01:58.904] Write at address 0x00600018 (0xffffb7533018): 0x00400040, readback 0x00400040 [2025-09-24 09:01:59.064] Loaded PowerVR consumer services. [2025-09-24 09:01:59.159] Waiting data available... [2025-09-24 09:01:59.176] 512+0 records in [2025-09-24 09:01:59.176] 512+0 records out [2025-09-24 09:01:59.208] Starting syslogd/klogd: done [2025-09-24 09:01:59.223] DML Start [2025-09-24 09:01:59.432] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:01:59.624] DML res1: 0 [2025-09-24 09:02:00.151] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:02:00.172] Read Success [2025-09-24 09:02:00.172] Verifying certificate... [2025-09-24 09:02:00.460] Verified OK [2025-09-24 09:02:00.492] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:02:02.283] Verified OK [2025-09-24 09:02:02.283] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:02:02.810] Verified OK [2025-09-24 09:02:02.810] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:02:05.289] fs.protected_hardlinks = 1 [2025-09-24 09:02:05.304] fs.protected_symlinks = 1 [2025-09-24 09:02:05.304] kernel.modules_disabled = 1 [2025-09-24 09:02:05.496] [2025-09-24 09:02:05.496] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:02:06.695] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:02:14.386] SBL1:1210.0.1.0 [2025-09-24 09:02:14.434] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:02:16.000] SBL2:1210.0.1.0 [2025-09-24 09:02:16.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:02:16.144] j-A [2025-09-24 09:02:23.499] The R5 Autosar Classic is running [2025-09-24 09:02:23.499] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:02:23.520] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:02:24.126] INIT: version 2.96 booting [2025-09-24 09:02:24.239] INIT: Entering runlevel: 5 [2025-09-24 09:02:24.383] mtd28 attached [2025-09-24 09:02:24.399] mtd24 attached [2025-09-24 09:02:24.415] mtd32 attached [2025-09-24 09:02:24.447] ubi1:textures is mounted. [2025-09-24 09:02:24.516] RTNETLINK answers: File exists [2025-09-24 09:02:24.516] ubi0:animations is mounted. [2025-09-24 09:02:24.516] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:02:24.516] ubi2:dml_code is mounted. [2025-09-24 09:02:24.516] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:02:24.516] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:02:24.516] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:02:24.516] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:02:24.516] data.LB_FadeInType0=100 [2025-09-24 09:02:24.516] data.CHLH_FadeInType0=0 [2025-09-24 09:02:24.516] data.WU_FadeInDelay=0 [2025-09-24 09:02:24.516] max_time_out=0 [2025-09-24 09:02:24.516] No splash screen [2025-09-24 09:02:24.516] stop dss Done [2025-09-24 09:02:24.586] /dev/mem opened. [2025-09-24 09:02:24.586] Memory mapped at address 0xffffad25b000. [2025-09-24 09:02:24.586] Read at address 0x00600018 (0xffffad25b018): 0x00000000 [2025-09-24 09:02:24.586] Write at address 0x00600018 (0xffffad25b018): 0x00400040, readback 0x00400040 [2025-09-24 09:02:24.586] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:02:24.618] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:02:24.730] Loaded PowerVR consumer services. [2025-09-24 09:02:24.827] Waiting data available... [2025-09-24 09:02:24.843] 512+0 records in [2025-09-24 09:02:24.843] 512+0 records out [2025-09-24 09:02:24.891] Starting syslogd/klogd: done [2025-09-24 09:02:24.907] DML Start [2025-09-24 09:02:25.130] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:02:25.322] DML res1: 0 [2025-09-24 09:02:25.751] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:02:25.751] Read Success [2025-09-24 09:02:25.751] Verifying certificate... [2025-09-24 09:02:25.990] Verified OK [2025-09-24 09:02:26.007] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:02:27.589] Verified OK [2025-09-24 09:02:27.605] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:02:28.223] Verified OK [2025-09-24 09:02:28.223] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:02:30.973] fs.protected_hardlinks = 1 [2025-09-24 09:02:30.989] fs.protected_symlinks = 1 [2025-09-24 09:02:31.005] kernel.modules_disabled = 1 [2025-09-24 09:02:31.196] [2025-09-24 09:02:31.196] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:02:32.405] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:02:40.086] SBL1:1210.0.1.0 [2025-09-24 09:02:40.134] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:02:41.700] SBL2:1210.0.1.0 [2025-09-24 09:02:41.748] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:02:41.844] j-A [2025-09-24 09:02:49.199] The R5 Autosar Classic is running [2025-09-24 09:02:49.221] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:02:49.221] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:02:49.828] INIT: version 2.96 booting [2025-09-24 09:02:49.940] INIT: Entering runlevel: 5 [2025-09-24 09:02:50.084] mtd24 attached [2025-09-24 09:02:50.100] mtd28 attached [2025-09-24 09:02:50.116] mtd32 attached [2025-09-24 09:02:50.217] ubi0:textures is mounted. [2025-09-24 09:02:50.217] RTNETLINK answers: File exists [2025-09-24 09:02:50.217] ubi1:animations is mounted. [2025-09-24 09:02:50.217] ubi2:dml_code is mounted. [2025-09-24 09:02:50.217] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:02:50.217] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:02:50.217] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:02:50.217] data.LB_FadeInType0=100 [2025-09-24 09:02:50.217] data.CHLH_FadeInType0=0 [2025-09-24 09:02:50.217] data.WU_FadeInDelay=0 [2025-09-24 09:02:50.217] max_time_out=0 [2025-09-24 09:02:50.217] No splash screen [2025-09-24 09:02:50.217] stop dss Done [2025-09-24 09:02:50.217] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:02:50.217] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:02:50.295] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:02:50.295] /dev/mem opened. [2025-09-24 09:02:50.295] Memory mapped at address 0xffff869c4000. [2025-09-24 09:02:50.295] Read at address 0x00600018 (0xffff869c4018): 0x00000000 [2025-09-24 09:02:50.295] Write at address 0x00600018 (0xffff869c4018): 0x00400040, readback 0x00400040 [2025-09-24 09:02:50.295] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:02:50.486] Loaded PowerVR consumer services. [2025-09-24 09:02:50.535] 512+0 records in [2025-09-24 09:02:50.535] 512+0 records out [2025-09-24 09:02:50.567] Starting syslogd/klogd: done [2025-09-24 09:02:50.599] Waiting data available... [2025-09-24 09:02:50.599] DML Start [2025-09-24 09:02:50.774] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:02:50.967] DML res1: 0 [2025-09-24 09:02:51.446] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:02:51.462] Read Success [2025-09-24 09:02:51.462] Verifying certificate... [2025-09-24 09:02:51.717] Verified OK [2025-09-24 09:02:51.734] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:02:53.438] Verified OK [2025-09-24 09:02:53.438] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:02:54.059] Verified OK [2025-09-24 09:02:54.059] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:02:56.521] fs.protected_hardlinks = 1 [2025-09-24 09:02:56.537] fs.protected_symlinks = 1 [2025-09-24 09:02:56.537] kernel.modules_disabled = 1 [2025-09-24 09:02:56.745] [2025-09-24 09:02:56.745] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:02:58.120] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:03:05.787] SBL1:1210.0.1.0 [2025-09-24 09:03:05.819] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:03:07.402] SBL2:1210.0.1.0 [2025-09-24 09:03:07.434] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:03:07.546] j-A [2025-09-24 09:03:14.919] The R5 Autosar Classic is running [2025-09-24 09:03:14.919] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:03:14.919] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:03:15.526] INIT: version 2.96 booting [2025-09-24 09:03:15.638] INIT: Entering runlevel: 5 [2025-09-24 09:03:15.798] mtd24 attached [2025-09-24 09:03:15.798] mtd32 attached [2025-09-24 09:03:15.814] mtd28 attached [2025-09-24 09:03:15.846] ubi0:textures is mounted. [2025-09-24 09:03:15.863] RTNETLINK answers: File exists [2025-09-24 09:03:15.907] ubi1:dml_code is mounted. [2025-09-24 09:03:15.907] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:03:15.907] ubi2:animations is mounted. [2025-09-24 09:03:15.907] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:03:15.907] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:03:15.907] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:03:15.907] data.LB_FadeInType0=100 [2025-09-24 09:03:15.907] data.CHLH_FadeInType0=0 [2025-09-24 09:03:15.932] data.WU_FadeInDelay=0 [2025-09-24 09:03:15.932] max_time_out=0 [2025-09-24 09:03:15.932] No splash screen [2025-09-24 09:03:15.932] stop dss Done [2025-09-24 09:03:15.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:03:15.998] /dev/mem opened. [2025-09-24 09:03:15.998] Memory mapped at address 0xffffbe81e000. [2025-09-24 09:03:15.998] Read at address 0x00600018 (0xffffbe81e018): 0x00000000 [2025-09-24 09:03:15.998] Write at address 0x00600018 (0xffffbe81e018): 0x00400040, readback 0x00400040 [2025-09-24 09:03:15.998] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:03:16.014] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:03:16.174] Loaded PowerVR consumer services. [2025-09-24 09:03:16.265] Waiting data available... [2025-09-24 09:03:16.265] 512+0 records in [2025-09-24 09:03:16.265] 512+0 records out [2025-09-24 09:03:16.281] Starting syslogd/klogd: done [2025-09-24 09:03:16.296] DML Start [2025-09-24 09:03:16.489] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:03:16.665] DML res1: 0 [2025-09-24 09:03:17.140] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:03:17.140] Read Success [2025-09-24 09:03:17.140] Verifying certificate... [2025-09-24 09:03:17.396] Verified OK [2025-09-24 09:03:17.412] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:03:19.050] Verified OK [2025-09-24 09:03:19.050] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:03:19.626] Verified OK [2025-09-24 09:03:19.647] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:03:22.333] fs.protected_hardlinks = 1 [2025-09-24 09:03:22.349] fs.protected_symlinks = 1 [2025-09-24 09:03:22.349] kernel.modules_disabled = 1 [2025-09-24 09:03:22.556] [2025-09-24 09:03:22.556] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:03:23.796] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:03:31.512] SBL1:1210.0.1.0 [2025-09-24 09:03:31.560] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:03:33.127] SBL2:1210.0.1.0 [2025-09-24 09:03:33.175] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:03:33.270] j-A [2025-09-24 09:03:40.624] The R5 Autosar Classic is running [2025-09-24 09:03:40.650] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:03:40.650] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:03:41.257] INIT: version 2.96 booting [2025-09-24 09:03:41.369] INIT: Entering runlevel: 5 [2025-09-24 09:03:41.528] mtd28 attached [2025-09-24 09:03:41.528] mtd24 attached [2025-09-24 09:03:41.544] mtd32 attached [2025-09-24 09:03:41.592] RTNETLINK answers: File exists [2025-09-24 09:03:41.658] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:03:41.658] ubi0:animations is mounted. [2025-09-24 09:03:41.658] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:03:41.658] ubi1:textures is mounted. [2025-09-24 09:03:41.658] ubi2:dml_code is mounted. [2025-09-24 09:03:41.658] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:03:41.658] data.LB_FadeInType0=100 [2025-09-24 09:03:41.658] data.CHLH_FadeInType0=0 [2025-09-24 09:03:41.658] data.WU_FadeInDelay=0 [2025-09-24 09:03:41.658] max_time_out=0 [2025-09-24 09:03:41.658] No splash screen [2025-09-24 09:03:41.658] stop dss Done [2025-09-24 09:03:41.658] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:03:41.658] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:03:41.725] /dev/mem opened. [2025-09-24 09:03:41.725] Memory mapped at address 0xffffa6e93000. [2025-09-24 09:03:41.725] Read at address 0x00600018 (0xffffa6e93018): 0x00000000 [2025-09-24 09:03:41.725] Write at address 0x00600018 (0xffffa6e93018): 0x00400040, readback 0x00400040 [2025-09-24 09:03:41.725] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:03:41.742] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:03:41.837] Loaded PowerVR consumer services. [2025-09-24 09:03:41.988] Waiting data available... [2025-09-24 09:03:41.988] 512+0 records in [2025-09-24 09:03:41.988] 512+0 records out [2025-09-24 09:03:42.020] Starting syslogd/klogd: done [2025-09-24 09:03:42.036] DML Start [2025-09-24 09:03:42.196] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:03:42.420] DML res1: 0 [2025-09-24 09:03:42.922] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:03:42.922] Read Success [2025-09-24 09:03:42.922] Verifying certificate... [2025-09-24 09:03:43.146] Verified OK [2025-09-24 09:03:43.163] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:03:44.825] Verified OK [2025-09-24 09:03:44.846] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:03:45.446] Verified OK [2025-09-24 09:03:45.446] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:03:48.113] fs.protected_hardlinks = 1 [2025-09-24 09:03:48.113] fs.protected_symlinks = 1 [2025-09-24 09:03:48.113] kernel.modules_disabled = 1 [2025-09-24 09:03:48.305] [2025-09-24 09:03:48.305] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:03:49.511] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:03:57.230] SBL1:1210.0.1.0 [2025-09-24 09:03:57.278] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:03:58.844] SBL2:1210.0.1.0 [2025-09-24 09:03:58.876] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:03:58.989] j-A [2025-09-24 09:04:06.363] The R5 Autosar Classic is running [2025-09-24 09:04:06.363] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:04:06.363] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:04:06.970] INIT: version 2.96 booting [2025-09-24 09:04:07.082] INIT: Entering runlevel: 5 [2025-09-24 09:04:07.242] mtd32 attached [2025-09-24 09:04:07.242] mtd28 attached [2025-09-24 09:04:07.258] mtd24 attached [2025-09-24 09:04:07.305] ubi0:dml_code is mounted. [2025-09-24 09:04:07.305] RTNETLINK answers: File exists [2025-09-24 09:04:07.351] ubi1:animations is mounted. [2025-09-24 09:04:07.351] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:04:07.351] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:04:07.351] ubi2:textures is mounted. [2025-09-24 09:04:07.351] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:04:07.351] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:04:07.351] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:04:07.375] data.LB_FadeInType0=100 [2025-09-24 09:04:07.375] data.CHLH_FadeInType0=0 [2025-09-24 09:04:07.375] data.WU_FadeInDelay=0 [2025-09-24 09:04:07.375] max_time_out=0 [2025-09-24 09:04:07.375] No splash screen [2025-09-24 09:04:07.375] stop dss Done [2025-09-24 09:04:07.466] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:04:07.466] /dev/mem opened. [2025-09-24 09:04:07.466] Memory mapped at address 0xffff8b844000. [2025-09-24 09:04:07.466] Read at address 0x00600018 (0xffff8b844018): 0x00000000 [2025-09-24 09:04:07.466] Write at address 0x00600018 (0xffff8b844018): 0x00400040, readback 0x00400040 [2025-09-24 09:04:07.466] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:04:07.562] Loaded PowerVR consumer services. [2025-09-24 09:04:07.689] 512+0 records in [2025-09-24 09:04:07.689] 512+0 records out [2025-09-24 09:04:07.705] Waiting data available... [2025-09-24 09:04:07.721] Starting syslogd/klogd: done [2025-09-24 09:04:07.737] DML Start [2025-09-24 09:04:07.945] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:04:08.201] DML res1: 0 [2025-09-24 09:04:08.553] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:04:08.569] Read Success [2025-09-24 09:04:08.569] Verifying certificate... [2025-09-24 09:04:08.841] Verified OK [2025-09-24 09:04:08.873] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:04:10.531] Verified OK [2025-09-24 09:04:10.531] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:04:11.186] Verified OK [2025-09-24 09:04:11.202] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:04:13.872] fs.protected_hardlinks = 1 [2025-09-24 09:04:13.888] fs.protected_symlinks = 1 [2025-09-24 09:04:13.888] kernel.modules_disabled = 1 [2025-09-24 09:04:14.080] [2025-09-24 09:04:14.080] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:04:15.225] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:04:22.944] SBL1:1210.0.1.0 [2025-09-24 09:04:22.976] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:04:24.558] SBL2:1210.0.1.0 [2025-09-24 09:04:24.591] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:04:24.702] j-A [2025-09-24 09:04:32.072] The R5 Autosar Classic is running [2025-09-24 09:04:32.072] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:04:32.072] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:04:32.679] INIT: version 2.96 booting [2025-09-24 09:04:32.791] INIT: Entering runlevel: 5 [2025-09-24 09:04:32.951] mtd28 attached [2025-09-24 09:04:32.951] mtd24 attached [2025-09-24 09:04:32.967] mtd32 attached [2025-09-24 09:04:33.015] ubi0:animations is mounted. [2025-09-24 09:04:33.082] RTNETLINK answers: File exists [2025-09-24 09:04:33.082] ubi1:textures is mounted. [2025-09-24 09:04:33.082] ubi2:dml_code is mounted. [2025-09-24 09:04:33.082] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:04:33.082] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:04:33.082] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:04:33.082] data.LB_FadeInType0=100 [2025-09-24 09:04:33.082] data.CHLH_FadeInType0=0 [2025-09-24 09:04:33.082] data.WU_FadeInDelay=0 [2025-09-24 09:04:33.082] max_time_out=0 [2025-09-24 09:04:33.082] No splash screen [2025-09-24 09:04:33.082] stop dss Done [2025-09-24 09:04:33.082] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:04:33.082] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:04:33.140] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:04:33.140] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:04:33.140] /dev/mem opened. [2025-09-24 09:04:33.140] Memory mapped at address 0xffff91dcd000. [2025-09-24 09:04:33.140] Read at address 0x00600018 (0xffff91dcd018): 0x00000000 [2025-09-24 09:04:33.140] Write at address 0x00600018 (0xffff91dcd018): 0x00400040, readback 0x00400040 [2025-09-24 09:04:33.348] Loaded PowerVR consumer services. [2025-09-24 09:04:33.412] Waiting data available... [2025-09-24 09:04:33.428] 512+0 records in [2025-09-24 09:04:33.428] 512+0 records out [2025-09-24 09:04:33.460] Starting syslogd/klogd: done [2025-09-24 09:04:33.476] DML Start [2025-09-24 09:04:33.667] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:04:33.891] DML res1: 0 [2025-09-24 09:04:34.319] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:04:34.319] Read Success [2025-09-24 09:04:34.319] Verifying certificate... [2025-09-24 09:04:34.558] Verified OK [2025-09-24 09:04:34.590] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:04:36.281] Verified OK [2025-09-24 09:04:36.281] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:04:36.927] Verified OK [2025-09-24 09:04:36.927] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:04:39.565] fs.protected_hardlinks = 1 [2025-09-24 09:04:39.565] fs.protected_symlinks = 1 [2025-09-24 09:04:39.581] kernel.modules_disabled = 1 [2025-09-24 09:04:39.757] [2025-09-24 09:04:39.757] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:04:40.981] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:04:48.646] SBL1:1210.0.1.0 [2025-09-24 09:04:48.694] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:04:50.261] SBL2:1210.0.1.0 [2025-09-24 09:04:50.309] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:04:50.405] j-A [2025-09-24 09:04:57.758] The R5 Autosar Classic is running [2025-09-24 09:04:57.782] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:04:57.782] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:04:58.389] INIT: version 2.96 booting [2025-09-24 09:04:58.501] INIT: Entering runlevel: 5 [2025-09-24 09:04:58.661] mtd32 attached [2025-09-24 09:04:58.661] mtd24 attached [2025-09-24 09:04:58.677] mtd28 attached [2025-09-24 09:04:58.709] RTNETLINK answers: File exists [2025-09-24 09:04:58.757] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:04:58.757] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:04:58.757] ubi0:dml_code is mounted. [2025-09-24 09:04:58.757] ubi1:textures is mounted. [2025-09-24 09:04:58.757] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:04:58.757] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:04:58.757] ubi2:animations is mounted. [2025-09-24 09:04:58.757] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:04:58.786] data.LB_FadeInType0=100 [2025-09-24 09:04:58.786] data.CHLH_FadeInType0=0 [2025-09-24 09:04:58.786] data.WU_FadeInDelay=0 [2025-09-24 09:04:58.786] max_time_out=0 [2025-09-24 09:04:58.786] No splash screen [2025-09-24 09:04:58.786] stop dss Done [2025-09-24 09:04:58.802] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:04:58.818] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:04:58.834] /dev/mem opened. [2025-09-24 09:04:58.834] Memory mapped at address 0xffffb1aad000. [2025-09-24 09:04:58.860] Read at address 0x00600018 (0xffffb1aad018): 0x00000000 [2025-09-24 09:04:58.860] Write at address 0x00600018 (0xffffb1aad018): 0x00400040, readback 0x00400040 [2025-09-24 09:04:58.972] Loaded PowerVR consumer services. [2025-09-24 09:04:59.110] Waiting data available... [2025-09-24 09:04:59.110] 512+0 records in [2025-09-24 09:04:59.110] 512+0 records out [2025-09-24 09:04:59.142] Starting syslogd/klogd: done [2025-09-24 09:04:59.158] DML Start [2025-09-24 09:04:59.366] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:04:59.606] DML res1: 0 [2025-09-24 09:04:59.983] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:04:59.983] Read Success [2025-09-24 09:04:59.983] Verifying certificate... [2025-09-24 09:05:00.207] Verified OK [2025-09-24 09:05:00.223] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:05:01.815] Verified OK [2025-09-24 09:05:01.815] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:05:02.391] Verified OK [2025-09-24 09:05:02.391] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:05:05.205] fs.protected_hardlinks = 1 [2025-09-24 09:05:05.205] fs.protected_symlinks = 1 [2025-09-24 09:05:05.221] kernel.modules_disabled = 1 [2025-09-24 09:05:05.413] [2025-09-24 09:05:05.413] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:05:06.676] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:05:14.349] SBL1:1210.0.1.0 [2025-09-24 09:05:14.397] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:05:15.963] SBL2:1210.0.1.0 [2025-09-24 09:05:16.011] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:05:16.107] j-A [2025-09-24 09:05:23.461] The R5 Autosar Classic is running [2025-09-24 09:05:23.486] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:05:23.486] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:05:24.093] INIT: version 2.96 booting [2025-09-24 09:05:24.205] INIT: Entering runlevel: 5 [2025-09-24 09:05:24.349] mtd28 attached [2025-09-24 09:05:24.365] mtd32 attached [2025-09-24 09:05:24.365] mtd24 attached [2025-09-24 09:05:24.413] ubi0:animations is mounted. [2025-09-24 09:05:24.490] RTNETLINK answers: File exists [2025-09-24 09:05:24.490] ubi2:textures is mounted. [2025-09-24 09:05:24.490] ubi1:dml_code is mounted. [2025-09-24 09:05:24.490] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:05:24.490] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:05:24.490] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:05:24.490] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:05:24.490] data.LB_FadeInType0=100 [2025-09-24 09:05:24.490] data.CHLH_FadeInType0=0 [2025-09-24 09:05:24.490] data.WU_FadeInDelay=0 [2025-09-24 09:05:24.490] max_time_out=0 [2025-09-24 09:05:24.490] No splash screen [2025-09-24 09:05:24.490] stop dss Done [2025-09-24 09:05:24.490] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:05:24.571] /dev/mem opened. [2025-09-24 09:05:24.571] Memory mapped at address 0xffffb1aa3000. [2025-09-24 09:05:24.571] Read at address 0x00600018 (0xffffb1aa3018): 0x00000000 [2025-09-24 09:05:24.571] Write at address 0x00600018 (0xffffb1aa3018): 0x00400040, readback 0x00400040 [2025-09-24 09:05:24.571] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:05:24.587] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:05:24.684] Loaded PowerVR consumer services. [2025-09-24 09:05:24.795] 512+0 records in [2025-09-24 09:05:24.811] 512+0 records out [2025-09-24 09:05:24.827] Waiting data available... [2025-09-24 09:05:24.843] Starting syslogd/klogd: done [2025-09-24 09:05:24.859] DML Start [2025-09-24 09:05:25.067] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:05:25.275] DML res1: 0 [2025-09-24 09:05:25.675] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:05:25.696] Read Success [2025-09-24 09:05:25.696] Verifying certificate... [2025-09-24 09:05:25.935] Verified OK [2025-09-24 09:05:25.951] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:05:27.550] Verified OK [2025-09-24 09:05:27.565] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:05:28.235] Verified OK [2025-09-24 09:05:28.235] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:05:30.969] fs.protected_hardlinks = 1 [2025-09-24 09:05:30.969] fs.protected_symlinks = 1 [2025-09-24 09:05:30.985] kernel.modules_disabled = 1 [2025-09-24 09:05:31.193] [2025-09-24 09:05:31.193] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:05:32.350] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:05:40.056] SBL1:1210.0.1.0 [2025-09-24 09:05:40.104] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:05:41.671] SBL2:1210.0.1.0 [2025-09-24 09:05:41.718] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:05:41.814] j-A [2025-09-24 09:05:49.168] The R5 Autosar Classic is running [2025-09-24 09:05:49.192] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:05:49.192] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:05:49.799] INIT: version 2.96 booting [2025-09-24 09:05:49.911] INIT: Entering runlevel: 5 [2025-09-24 09:05:50.071] mtd32 attached [2025-09-24 09:05:50.071] mtd24 attached [2025-09-24 09:05:50.087] mtd28 attached [2025-09-24 09:05:50.135] RTNETLINK answers: File exists [2025-09-24 09:05:50.185] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:05:50.185] ubi1:textures is mounted. [2025-09-24 09:05:50.185] ubi0:dml_code is mounted. [2025-09-24 09:05:50.185] ubi2:animations is mounted. [2025-09-24 09:05:50.185] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:05:50.185] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:05:50.185] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:05:50.185] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:05:50.185] data.LB_FadeInType0=100 [2025-09-24 09:05:50.185] data.CHLH_FadeInType0=0 [2025-09-24 09:05:50.206] data.WU_FadeInDelay=0 [2025-09-24 09:05:50.206] max_time_out=0 [2025-09-24 09:05:50.206] No splash screen [2025-09-24 09:05:50.206] stop dss Done [2025-09-24 09:05:50.296] /dev/mem opened. [2025-09-24 09:05:50.296] Memory mapped at address 0xffffb7094000. [2025-09-24 09:05:50.296] Read at address 0x00600018 (0xffffb7094018): 0x00000000 [2025-09-24 09:05:50.296] Write at address 0x00600018 (0xffffb7094018): 0x00400040, readback 0x00400040 [2025-09-24 09:05:50.296] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:05:50.296] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:05:50.376] Loaded PowerVR consumer services. [2025-09-24 09:05:50.526] 512+0 records in [2025-09-24 09:05:50.526] 512+0 records out [2025-09-24 09:05:50.526] Waiting data available... [2025-09-24 09:05:50.558] Starting syslogd/klogd: done [2025-09-24 09:05:50.575] DML Start [2025-09-24 09:05:50.750] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:05:50.974] DML res1: 0 [2025-09-24 09:05:51.438] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:05:51.459] Read Success [2025-09-24 09:05:51.459] Verifying certificate... [2025-09-24 09:05:51.731] Verified OK [2025-09-24 09:05:51.747] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:05:53.353] Verified OK [2025-09-24 09:05:53.353] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:05:53.865] Verified OK [2025-09-24 09:05:53.865] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:05:56.628] fs.protected_hardlinks = 1 [2025-09-24 09:05:56.628] fs.protected_symlinks = 1 [2025-09-24 09:05:56.628] kernel.modules_disabled = 1 [2025-09-24 09:05:56.819] [2025-09-24 09:05:56.819] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:05:58.096] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:06:05.761] SBL1:1210.0.1.0 [2025-09-24 09:06:05.809] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:06:07.375] SBL2:1210.0.1.0 [2025-09-24 09:06:07.407] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:06:07.519] j-A [2025-09-24 09:06:14.873] The R5 Autosar Classic is running [2025-09-24 09:06:14.873] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:06:14.894] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:06:15.502] INIT: version 2.96 booting [2025-09-24 09:06:15.614] INIT: Entering runlevel: 5 [2025-09-24 09:06:15.774] mtd24 attached [2025-09-24 09:06:15.790] mtd28 attached [2025-09-24 09:06:15.790] mtd32 attached [2025-09-24 09:06:15.838] ubi0:textures is mounted. [2025-09-24 09:06:15.903] RTNETLINK answers: File exists [2025-09-24 09:06:15.903] ubi1:animations is mounted. [2025-09-24 09:06:15.903] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:06:15.903] ubi2:dml_code is mounted. [2025-09-24 09:06:15.903] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:06:15.903] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:06:15.903] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:06:15.903] data.LB_FadeInType0=100 [2025-09-24 09:06:15.903] data.CHLH_FadeInType0=0 [2025-09-24 09:06:15.903] data.WU_FadeInDelay=0 [2025-09-24 09:06:15.903] max_time_out=0 [2025-09-24 09:06:15.903] No splash screen [2025-09-24 09:06:15.903] stop dss Done [2025-09-24 09:06:15.903] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:06:15.951] /dev/mem opened. [2025-09-24 09:06:15.951] Memory mapped at address 0xffff94954000. [2025-09-24 09:06:15.984] Read at address 0x00600018 (0xffff94954018): 0x00000000 [2025-09-24 09:06:15.984] Write at address 0x00600018 (0xffff94954018): 0x00400040, readback 0x00400040 [2025-09-24 09:06:15.984] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:06:15.984] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:06:16.065] Loaded PowerVR consumer services. [2025-09-24 09:06:16.230] Waiting data available... [2025-09-24 09:06:16.230] 512+0 records in [2025-09-24 09:06:16.230] 512+0 records out [2025-09-24 09:06:16.246] Starting syslogd/klogd: done [2025-09-24 09:06:16.279] DML Start [2025-09-24 09:06:16.470] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:06:16.678] DML res1: 0 [2025-09-24 09:06:17.165] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:06:17.165] Read Success [2025-09-24 09:06:17.165] Verifying certificate... [2025-09-24 09:06:17.437] Verified OK [2025-09-24 09:06:17.469] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:06:19.259] Verified OK [2025-09-24 09:06:19.280] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:06:19.742] Verified OK [2025-09-24 09:06:19.742] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:06:22.219] fs.protected_hardlinks = 1 [2025-09-24 09:06:22.219] fs.protected_symlinks = 1 [2025-09-24 09:06:22.235] kernel.modules_disabled = 1 [2025-09-24 09:06:22.428] [2025-09-24 09:06:22.428] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:06:23.742] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:06:31.473] SBL1:1210.0.1.0 [2025-09-24 09:06:31.521] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:06:33.089] SBL2:1210.0.1.0 [2025-09-24 09:06:33.120] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:06:33.232] j-A [2025-09-24 09:06:40.587] The R5 Autosar Classic is running [2025-09-24 09:06:40.587] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:06:40.608] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:06:41.215] INIT: version 2.96 booting [2025-09-24 09:06:41.326] INIT: Entering runlevel: 5 [2025-09-24 09:06:41.471] mtd24 attached [2025-09-24 09:06:41.487] mtd28 attached [2025-09-24 09:06:41.503] mtd32 attached [2025-09-24 09:06:41.535] ubi0:textures is mounted. [2025-09-24 09:06:41.551] RTNETLINK answers: File exists [2025-09-24 09:06:41.608] ubi1:animations is mounted. [2025-09-24 09:06:41.608] ubi2:dml_code is mounted. [2025-09-24 09:06:41.608] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:06:41.608] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:06:41.608] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:06:41.608] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:06:41.608] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:06:41.608] data.LB_FadeInType0=100 [2025-09-24 09:06:41.608] data.CHLH_FadeInType0=0 [2025-09-24 09:06:41.608] data.WU_FadeInDelay=0 [2025-09-24 09:06:41.608] max_time_out=0 [2025-09-24 09:06:41.608] No splash screen [2025-09-24 09:06:41.608] stop dss Done [2025-09-24 09:06:41.639] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:06:41.677] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:06:41.677] /dev/mem opened. [2025-09-24 09:06:41.677] Memory mapped at address 0xffffa581b000. [2025-09-24 09:06:41.677] Read at address 0x00600018 (0xffffa581b018): 0x00000000 [2025-09-24 09:06:41.677] Write at address 0x00600018 (0xffffa581b018): 0x00400040, readback 0x00400040 [2025-09-24 09:06:41.822] Loaded PowerVR consumer services. [2025-09-24 09:06:41.948] Waiting data available... [2025-09-24 09:06:41.948] 512+0 records in [2025-09-24 09:06:41.948] 512+0 records out [2025-09-24 09:06:41.964] Starting syslogd/klogd: done [2025-09-24 09:06:41.980] DML Start [2025-09-24 09:06:42.156] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:06:42.411] DML res1: 0 [2025-09-24 09:06:42.812] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:06:42.827] Read Success [2025-09-24 09:06:42.827] Verifying certificate... [2025-09-24 09:06:43.067] Verified OK [2025-09-24 09:06:43.083] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:06:44.886] Verified OK [2025-09-24 09:06:44.886] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:06:45.403] Verified OK [2025-09-24 09:06:45.403] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:06:47.861] fs.protected_hardlinks = 1 [2025-09-24 09:06:47.861] fs.protected_symlinks = 1 [2025-09-24 09:06:47.861] kernel.modules_disabled = 1 [2025-09-24 09:06:48.052] [2025-09-24 09:06:48.052] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:06:49.475] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:06:57.172] SBL1:1210.0.1.0 [2025-09-24 09:06:57.221] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:06:58.788] SBL2:1210.0.1.0 [2025-09-24 09:06:58.836] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:06:58.932] j-A [2025-09-24 09:07:06.287] The R5 Autosar Classic is running [2025-09-24 09:07:06.312] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:07:06.312] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:07:06.919] INIT: version 2.96 booting [2025-09-24 09:07:07.031] INIT: Entering runlevel: 5 [2025-09-24 09:07:07.191] mtd32 attached [2025-09-24 09:07:07.191] mtd28 attached [2025-09-24 09:07:07.207] mtd24 attached [2025-09-24 09:07:07.239] ubi0:dml_code is mounted. [2025-09-24 09:07:07.255] RTNETLINK answers: File exists [2025-09-24 09:07:07.290] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:07:07.290] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:07:07.290] ubi1:animations is mounted. [2025-09-24 09:07:07.290] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:07:07.290] ubi2:textures is mounted. [2025-09-24 09:07:07.290] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:07:07.290] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:07:07.314] data.LB_FadeInType0=100 [2025-09-24 09:07:07.314] data.CHLH_FadeInType0=0 [2025-09-24 09:07:07.314] data.WU_FadeInDelay=0 [2025-09-24 09:07:07.314] max_time_out=0 [2025-09-24 09:07:07.314] No splash screen [2025-09-24 09:07:07.314] stop dss Done [2025-09-24 09:07:07.345] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:07:07.361] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:07:07.361] /dev/mem opened. [2025-09-24 09:07:07.387] Memory mapped at address 0xffff9ca8e000. [2025-09-24 09:07:07.387] Read at address 0x00600018 (0xffff9ca8e018): 0x00000000 [2025-09-24 09:07:07.387] Write at address 0x00600018 (0xffff9ca8e018): 0x00400040, readback 0x00400040 [2025-09-24 09:07:07.484] Loaded PowerVR consumer services. [2025-09-24 09:07:07.643] 512+0 records in [2025-09-24 09:07:07.643] 512+0 records out [2025-09-24 09:07:07.643] Waiting data available... [2025-09-24 09:07:07.674] Starting syslogd/klogd: done [2025-09-24 09:07:07.690] DML Start [2025-09-24 09:07:07.866] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:07:08.139] DML res1: 0 [2025-09-24 09:07:08.536] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:07:08.536] Read Success [2025-09-24 09:07:08.536] Verifying certificate... [2025-09-24 09:07:08.792] Verified OK [2025-09-24 09:07:08.808] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:07:10.357] Verified OK [2025-09-24 09:07:10.357] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:07:10.876] Verified OK [2025-09-24 09:07:10.876] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:07:13.705] fs.protected_hardlinks = 1 [2025-09-24 09:07:13.705] fs.protected_symlinks = 1 [2025-09-24 09:07:13.721] kernel.modules_disabled = 1 [2025-09-24 09:07:13.897] [2025-09-24 09:07:13.897] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:07:15.189] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:07:22.876] SBL1:1210.0.1.0 [2025-09-24 09:07:22.924] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:07:24.490] SBL2:1210.0.1.0 [2025-09-24 09:07:24.538] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:07:24.634] j-A [2025-09-24 09:07:31.990] The R5 Autosar Classic is running [2025-09-24 09:07:32.011] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:07:32.011] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:07:32.618] INIT: version 2.96 booting [2025-09-24 09:07:32.730] INIT: Entering runlevel: 5 [2025-09-24 09:07:32.874] mtd28 attached [2025-09-24 09:07:32.890] mtd32 attached [2025-09-24 09:07:32.906] mtd24 attached [2025-09-24 09:07:32.938] ubi0:animations is mounted. [2025-09-24 09:07:32.954] RTNETLINK answers: File exists [2025-09-24 09:07:32.954] ubi1:dml_code is mounted. [2025-09-24 09:07:33.011] ubi2:textures is mounted. [2025-09-24 09:07:33.011] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:07:33.011] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:07:33.011] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:07:33.011] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:07:33.011] data.LB_FadeInType0=100 [2025-09-24 09:07:33.011] data.CHLH_FadeInType0=0 [2025-09-24 09:07:33.011] data.WU_FadeInDelay=0 [2025-09-24 09:07:33.011] max_time_out=0 [2025-09-24 09:07:33.011] No splash screen [2025-09-24 09:07:33.011] stop dss Done [2025-09-24 09:07:33.011] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:07:33.082] /dev/mem opened. [2025-09-24 09:07:33.082] Memory mapped at address 0xffff99a52000. [2025-09-24 09:07:33.082] Read at address 0x00600018 (0xffff99a52018): 0x00000000 [2025-09-24 09:07:33.082] Write at address 0x00600018 (0xffff99a52018): 0x00400040, readback 0x00400040 [2025-09-24 09:07:33.131] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:07:33.147] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:07:33.275] Loaded PowerVR consumer services. [2025-09-24 09:07:33.351] Waiting data available... [2025-09-24 09:07:33.351] 512+0 records in [2025-09-24 09:07:33.351] 512+0 records out [2025-09-24 09:07:33.367] Starting syslogd/klogd: done [2025-09-24 09:07:33.383] DML Start [2025-09-24 09:07:33.526] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:07:33.734] DML res1: 0 [2025-09-24 09:07:34.268] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:07:34.268] Read Success [2025-09-24 09:07:34.268] Verifying certificate... [2025-09-24 09:07:34.508] Verified OK [2025-09-24 09:07:34.524] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:07:36.136] Verified OK [2025-09-24 09:07:36.136] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:07:36.748] Verified OK [2025-09-24 09:07:36.748] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:07:39.481] fs.protected_hardlinks = 1 [2025-09-24 09:07:39.481] fs.protected_symlinks = 1 [2025-09-24 09:07:39.497] kernel.modules_disabled = 1 [2025-09-24 09:07:39.689] [2025-09-24 09:07:39.689] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:07:40.904] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:07:48.605] SBL1:1210.0.1.0 [2025-09-24 09:07:48.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:07:50.220] SBL2:1210.0.1.0 [2025-09-24 09:07:50.268] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:07:50.364] j-A [2025-09-24 09:07:57.719] The R5 Autosar Classic is running [2025-09-24 09:07:57.743] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:07:57.743] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:07:58.350] INIT: version 2.96 booting [2025-09-24 09:07:58.478] INIT: Entering runlevel: 5 [2025-09-24 09:07:58.622] mtd28 attached [2025-09-24 09:07:58.638] mtd32 attached [2025-09-24 09:07:58.638] mtd24 attached [2025-09-24 09:07:58.686] RTNETLINK answers: File exists [2025-09-24 09:07:58.738] ubi0:animations is mounted. [2025-09-24 09:07:58.738] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:07:58.738] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:07:58.738] ubi1:dml_code is mounted. [2025-09-24 09:07:58.738] ubi2:textures is mounted. [2025-09-24 09:07:58.738] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:07:58.738] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:07:58.738] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:07:58.762] data.LB_FadeInType0=100 [2025-09-24 09:07:58.762] data.CHLH_FadeInType0=0 [2025-09-24 09:07:58.762] data.WU_FadeInDelay=0 [2025-09-24 09:07:58.762] max_time_out=0 [2025-09-24 09:07:58.762] No splash screen [2025-09-24 09:07:58.762] stop dss Done [2025-09-24 09:07:58.832] /dev/mem opened. [2025-09-24 09:07:58.832] Memory mapped at address 0xffffba0b4000. [2025-09-24 09:07:58.832] Read at address 0x00600018 (0xffffba0b4018): 0x00000000 [2025-09-24 09:07:58.832] Write at address 0x00600018 (0xffffba0b4018): 0x00400040, readback 0x00400040 [2025-09-24 09:07:58.862] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:07:58.862] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:07:59.055] Loaded PowerVR consumer services. [2025-09-24 09:07:59.087] 512+0 records in [2025-09-24 09:07:59.087] 512+0 records out [2025-09-24 09:07:59.102] Waiting data available... [2025-09-24 09:07:59.134] Starting syslogd/klogd: done [2025-09-24 09:07:59.150] DML Start [2025-09-24 09:07:59.327] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:07:59.550] DML res1: 0 [2025-09-24 09:08:00.013] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:08:00.030] Read Success [2025-09-24 09:08:00.030] Verifying certificate... [2025-09-24 09:08:00.301] Verified OK [2025-09-24 09:08:00.317] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:08:02.085] Verified OK [2025-09-24 09:08:02.085] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:08:02.676] Verified OK [2025-09-24 09:08:02.676] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:08:05.185] fs.protected_hardlinks = 1 [2025-09-24 09:08:05.185] fs.protected_symlinks = 1 [2025-09-24 09:08:05.185] kernel.modules_disabled = 1 [2025-09-24 09:08:05.376] [2025-09-24 09:08:05.376] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:08:06.595] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:08:14.329] SBL1:1210.0.1.0 [2025-09-24 09:08:14.377] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:08:15.943] SBL2:1210.0.1.0 [2025-09-24 09:08:15.975] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:08:16.087] j-A [2025-09-24 09:08:23.461] The R5 Autosar Classic is running [2025-09-24 09:08:23.461] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:08:23.461] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:08:24.070] INIT: version 2.96 booting [2025-09-24 09:08:24.181] INIT: Entering runlevel: 5 [2025-09-24 09:08:24.341] mtd28 attached [2025-09-24 09:08:24.341] mtd24 attached [2025-09-24 09:08:24.357] mtd32 attached [2025-09-24 09:08:24.406] RTNETLINK answers: File exists [2025-09-24 09:08:24.442] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:08:24.442] ubi1:textures is mounted. [2025-09-24 09:08:24.442] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:08:24.442] ubi2:dml_code is mounted. [2025-09-24 09:08:24.442] ubi0:animations is mounted. [2025-09-24 09:08:24.442] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:08:24.442] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:08:24.442] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:08:24.468] data.LB_FadeInType0=100 [2025-09-24 09:08:24.468] data.CHLH_FadeInType0=0 [2025-09-24 09:08:24.468] data.WU_FadeInDelay=0 [2025-09-24 09:08:24.468] max_time_out=0 [2025-09-24 09:08:24.468] No splash screen [2025-09-24 09:08:24.468] stop dss Done [2025-09-24 09:08:24.500] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:08:24.536] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:08:24.536] /dev/mem opened. [2025-09-24 09:08:24.536] Memory mapped at address 0xffff81d1b000. [2025-09-24 09:08:24.536] Read at address 0x00600018 (0xffff81d1b018): 0x00000000 [2025-09-24 09:08:24.536] Write at address 0x00600018 (0xffff81d1b018): 0x00400040, readback 0x00400040 [2025-09-24 09:08:24.663] Loaded PowerVR consumer services. [2025-09-24 09:08:24.805] Waiting data available... [2025-09-24 09:08:24.805] 512+0 records in [2025-09-24 09:08:24.805] 512+0 records out [2025-09-24 09:08:24.837] Starting syslogd/klogd: done [2025-09-24 09:08:24.853] DML Start [2025-09-24 09:08:25.044] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:08:25.268] DML res1: 0 [2025-09-24 09:08:25.726] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:08:25.726] Read Success [2025-09-24 09:08:25.726] Verifying certificate... [2025-09-24 09:08:25.949] Verified OK [2025-09-24 09:08:25.965] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:08:27.594] Verified OK [2025-09-24 09:08:27.594] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:08:28.256] Verified OK [2025-09-24 09:08:28.256] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:08:30.941] fs.protected_hardlinks = 1 [2025-09-24 09:08:30.941] fs.protected_symlinks = 1 [2025-09-24 09:08:30.957] kernel.modules_disabled = 1 [2025-09-24 09:08:31.133] [2025-09-24 09:08:31.133] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:08:32.364] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:08:40.036] SBL1:1210.0.1.0 [2025-09-24 09:08:40.068] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:08:41.651] SBL2:1210.0.1.0 [2025-09-24 09:08:41.683] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:08:41.795] j-A [2025-09-24 09:08:49.164] The R5 Autosar Classic is running [2025-09-24 09:08:49.164] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:08:49.164] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:08:49.772] INIT: version 2.96 booting [2025-09-24 09:08:49.884] INIT: Entering runlevel: 5 [2025-09-24 09:08:50.027] mtd24 attached [2025-09-24 09:08:50.043] mtd28 attached [2025-09-24 09:08:50.043] mtd32 attached [2025-09-24 09:08:50.108] ubi0:textures is mounted. [2025-09-24 09:08:50.108] RTNETLINK answers: File exists [2025-09-24 09:08:50.147] ubi1:animations is mounted. [2025-09-24 09:08:50.147] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:08:50.147] ubi2:dml_code is mounted. [2025-09-24 09:08:50.147] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:08:50.147] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:08:50.147] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:08:50.147] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:08:50.174] data.LB_FadeInType0=100 [2025-09-24 09:08:50.174] data.CHLH_FadeInType0=0 [2025-09-24 09:08:50.174] data.WU_FadeInDelay=0 [2025-09-24 09:08:50.174] max_time_out=0 [2025-09-24 09:08:50.174] No splash screen [2025-09-24 09:08:50.174] stop dss Done [2025-09-24 09:08:50.202] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:08:50.202] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:08:50.251] /dev/mem opened. [2025-09-24 09:08:50.251] Memory mapped at address 0xffffabc14000. [2025-09-24 09:08:50.251] Read at address 0x00600018 (0xffffabc14018): 0x00000000 [2025-09-24 09:08:50.251] Write at address 0x00600018 (0xffffabc14018): 0x00400040, readback 0x00400040 [2025-09-24 09:08:50.443] Loaded PowerVR consumer services. [2025-09-24 09:08:50.475] Waiting data available... [2025-09-24 09:08:50.491] 512+0 records in [2025-09-24 09:08:50.491] 512+0 records out [2025-09-24 09:08:50.523] Starting syslogd/klogd: done [2025-09-24 09:08:50.555] DML Start [2025-09-24 09:08:50.715] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:08:50.971] DML res1: 0 [2025-09-24 09:08:51.348] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:08:51.348] Read Success [2025-09-24 09:08:51.348] Verifying certificate... [2025-09-24 09:08:51.619] Verified OK [2025-09-24 09:08:51.635] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:08:53.408] Verified OK [2025-09-24 09:08:53.408] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:08:54.016] Verified OK [2025-09-24 09:08:54.037] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:08:56.482] fs.protected_hardlinks = 1 [2025-09-24 09:08:56.498] fs.protected_symlinks = 1 [2025-09-24 09:08:56.498] kernel.modules_disabled = 1 [2025-09-24 09:08:56.706] [2025-09-24 09:08:56.706] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:08:58.081] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:09:05.758] SBL1:1210.0.1.0 [2025-09-24 09:09:05.789] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:09:07.372] SBL2:1210.0.1.0 [2025-09-24 09:09:07.403] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:09:07.516] j-A [2025-09-24 09:09:14.890] The R5 Autosar Classic is running [2025-09-24 09:09:14.890] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:09:14.890] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:09:15.482] INIT: version 2.96 booting [2025-09-24 09:09:15.594] INIT: Entering runlevel: 5 [2025-09-24 09:09:15.754] mtd28 attached [2025-09-24 09:09:15.754] mtd32 attached [2025-09-24 09:09:15.770] mtd24 attached [2025-09-24 09:09:15.817] ubi0:animations is mounted. [2025-09-24 09:09:15.817] RTNETLINK answers: File exists [2025-09-24 09:09:15.877] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:09:15.877] ubi2:textures is mounted. [2025-09-24 09:09:15.877] ubi1:dml_code is mounted. [2025-09-24 09:09:15.877] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:09:15.877] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:09:15.877] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:09:15.877] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:09:15.877] data.LB_FadeInType0=100 [2025-09-24 09:09:15.877] data.CHLH_FadeInType0=0 [2025-09-24 09:09:15.877] data.WU_FadeInDelay=0 [2025-09-24 09:09:15.877] max_time_out=0 [2025-09-24 09:09:15.877] No splash screen [2025-09-24 09:09:15.877] stop dss Done [2025-09-24 09:09:15.919] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:09:15.919] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:09:15.955] /dev/mem opened. [2025-09-24 09:09:15.955] Memory mapped at address 0xffffa4f8c000. [2025-09-24 09:09:15.955] Read at address 0x00600018 (0xffffa4f8c018): 0x00000000 [2025-09-24 09:09:15.955] Write at address 0x00600018 (0xffffa4f8c018): 0x00400040, readback 0x00400040 [2025-09-24 09:09:16.035] Loaded PowerVR consumer services. [2025-09-24 09:09:16.207] Waiting data available... [2025-09-24 09:09:16.207] 512+0 records in [2025-09-24 09:09:16.207] 512+0 records out [2025-09-24 09:09:16.239] Starting syslogd/klogd: done [2025-09-24 09:09:16.255] DML Start [2025-09-24 09:09:16.431] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:09:16.671] DML res1: 0 [2025-09-24 09:09:17.148] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:09:17.148] Read Success [2025-09-24 09:09:17.148] Verifying certificate... [2025-09-24 09:09:17.403] Verified OK [2025-09-24 09:09:17.419] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:09:19.121] Verified OK [2025-09-24 09:09:19.121] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:09:19.704] Verified OK [2025-09-24 09:09:19.704] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:09:22.262] fs.protected_hardlinks = 1 [2025-09-24 09:09:22.262] fs.protected_symlinks = 1 [2025-09-24 09:09:22.278] kernel.modules_disabled = 1 [2025-09-24 09:09:22.471] [2025-09-24 09:09:22.471] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:09:23.776] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:09:31.455] SBL1:1210.0.1.0 [2025-09-24 09:09:31.503] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:09:33.070] SBL2:1210.0.1.0 [2025-09-24 09:09:33.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:09:33.213] j-A [2025-09-24 09:09:40.567] The R5 Autosar Classic is running [2025-09-24 09:09:40.567] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:09:40.588] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:09:41.196] INIT: version 2.96 booting [2025-09-24 09:09:41.308] INIT: Entering runlevel: 5 [2025-09-24 09:09:41.451] mtd24 attached [2025-09-24 09:09:41.467] mtd28 attached [2025-09-24 09:09:41.483] mtd32 attached [2025-09-24 09:09:41.532] RTNETLINK answers: File exists [2025-09-24 09:09:41.597] ubi2:dml_code is mounted. [2025-09-24 09:09:41.597] ubi0:textures is mounted. [2025-09-24 09:09:41.597] ubi1:animations is mounted. [2025-09-24 09:09:41.597] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:09:41.597] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:09:41.597] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:09:41.597] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:09:41.597] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:09:41.597] data.LB_FadeInType0=100 [2025-09-24 09:09:41.597] data.CHLH_FadeInType0=0 [2025-09-24 09:09:41.597] data.WU_FadeInDelay=0 [2025-09-24 09:09:41.597] max_time_out=0 [2025-09-24 09:09:41.597] No splash screen [2025-09-24 09:09:41.597] stop dss Done [2025-09-24 09:09:41.664] /dev/mem opened. [2025-09-24 09:09:41.664] Memory mapped at address 0xffffb3798000. [2025-09-24 09:09:41.664] Read at address 0x00600018 (0xffffb3798018): 0x00000000 [2025-09-24 09:09:41.664] Write at address 0x00600018 (0xffffb3798018): 0x00400040, readback 0x00400040 [2025-09-24 09:09:41.695] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:09:41.695] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:09:41.871] Loaded PowerVR consumer services. [2025-09-24 09:09:41.919] 512+0 records in [2025-09-24 09:09:41.919] 512+0 records out [2025-09-24 09:09:41.951] Waiting data available... [2025-09-24 09:09:41.967] Starting syslogd/klogd: done [2025-09-24 09:09:41.999] DML Start [2025-09-24 09:09:42.175] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:09:42.399] DML res1: 0 [2025-09-24 09:09:42.829] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:09:42.829] Read Success [2025-09-24 09:09:42.829] Verifying certificate... [2025-09-24 09:09:43.117] Verified OK [2025-09-24 09:09:43.133] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:09:44.948] Verified OK [2025-09-24 09:09:44.948] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:09:45.460] Verified OK [2025-09-24 09:09:45.460] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:09:47.938] fs.protected_hardlinks = 1 [2025-09-24 09:09:47.953] fs.protected_symlinks = 1 [2025-09-24 09:09:47.954] kernel.modules_disabled = 1 [2025-09-24 09:09:48.161] [2025-09-24 09:09:48.161] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:09:49.465] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:09:57.186] SBL1:1210.0.1.0 [2025-09-24 09:09:57.234] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:09:58.802] SBL2:1210.0.1.0 [2025-09-24 09:09:58.834] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:09:58.945] j-A [2025-09-24 09:10:06.320] The R5 Autosar Classic is running [2025-09-24 09:10:06.320] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:10:06.320] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:10:06.927] INIT: version 2.96 booting [2025-09-24 09:10:07.039] INIT: Entering runlevel: 5 [2025-09-24 09:10:07.182] mtd24 attached [2025-09-24 09:10:07.199] mtd28 attached [2025-09-24 09:10:07.215] mtd32 attached [2025-09-24 09:10:07.231] ubi0:textures is mounted. [2025-09-24 09:10:07.263] ubi1:animations is mounted. [2025-09-24 09:10:07.263] RTNETLINK answers: File exists [2025-09-24 09:10:07.319] ubi2:dml_code is mounted. [2025-09-24 09:10:07.319] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:10:07.319] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:10:07.319] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:10:07.319] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:10:07.319] data.LB_FadeInType0=100 [2025-09-24 09:10:07.319] data.CHLH_FadeInType0=0 [2025-09-24 09:10:07.319] data.WU_FadeInDelay=0 [2025-09-24 09:10:07.319] max_time_out=0 [2025-09-24 09:10:07.319] No splash screen [2025-09-24 09:10:07.319] stop dss Done [2025-09-24 09:10:07.319] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:10:07.405] /dev/mem opened. [2025-09-24 09:10:07.405] Memory mapped at address 0xffffa33e0000. [2025-09-24 09:10:07.405] Read at address 0x00600018 (0xffffa33e0018): 0x00000000 [2025-09-24 09:10:07.405] Write at address 0x00600018 (0xffffa33e0018): 0x00400040, readback 0x00400040 [2025-09-24 09:10:07.405] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:10:07.405] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:10:07.581] Loaded PowerVR consumer services. [2025-09-24 09:10:07.660] Waiting data available... [2025-09-24 09:10:07.676] 512+0 records in [2025-09-24 09:10:07.676] 512+0 records out [2025-09-24 09:10:07.692] Starting syslogd/klogd: done [2025-09-24 09:10:07.708] DML Start [2025-09-24 09:10:07.932] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:10:08.124] DML res1: 0 [2025-09-24 09:10:08.476] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:10:08.497] Read Success [2025-09-24 09:10:08.497] Verifying certificate... [2025-09-24 09:10:08.720] Verified OK [2025-09-24 09:10:08.736] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:10:10.237] Verified OK [2025-09-24 09:10:10.237] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:10:10.860] Verified OK [2025-09-24 09:10:10.860] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:10:13.687] fs.protected_hardlinks = 1 [2025-09-24 09:10:13.687] fs.protected_symlinks = 1 [2025-09-24 09:10:13.687] kernel.modules_disabled = 1 [2025-09-24 09:10:13.863] [2025-09-24 09:10:13.863] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:10:15.248] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:10:22.890] SBL1:1210.0.1.0 [2025-09-24 09:10:22.938] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 09:10:24.504] SBL2:1210.0.1.0 [2025-09-24 09:10:24.536] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:10:24.649] j-A [2025-09-24 09:10:32.001] The R5 Autosar Classic is running [2025-09-24 09:10:32.001] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:10:32.022] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:10:32.630] INIT: version 2.96 booting [2025-09-24 09:10:32.742] INIT: Entering runlevel: 5 [2025-09-24 09:10:32.887] mtd28 attached [2025-09-24 09:10:32.903] mtd32 attached [2025-09-24 09:10:32.918] mtd24 attached [2025-09-24 09:10:32.934] ubi0:animations is mounted. [2025-09-24 09:10:32.950] ubi1:dml_code is mounted. [2025-09-24 09:10:32.966] RTNETLINK answers: File exists [2025-09-24 09:10:33.017] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:10:33.017] ubi2:textures is mounted. [2025-09-24 09:10:33.017] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:10:33.017] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:10:33.017] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:10:33.017] data.LB_FadeInType0=100 [2025-09-24 09:10:33.017] data.CHLH_FadeInType0=0 [2025-09-24 09:10:33.017] data.WU_FadeInDelay=0 [2025-09-24 09:10:33.017] max_time_out=0 [2025-09-24 09:10:33.017] No splash screen [2025-09-24 09:10:33.017] stop dss Done [2025-09-24 09:10:33.017] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:10:33.087] /dev/mem opened. [2025-09-24 09:10:33.087] Memory mapped at address 0xffff88368000. [2025-09-24 09:10:33.087] Read at address 0x00600018 (0xffff88368018): 0x00000000 [2025-09-24 09:10:33.087] Write at address 0x00600018 (0xffff88368018): 0x00400040, readback 0x00400040 [2025-09-24 09:10:33.145] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:10:33.145] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:10:33.242] Loaded PowerVR consumer services. [2025-09-24 09:10:33.354] Waiting data available... [2025-09-24 09:10:33.370] 512+0 records in [2025-09-24 09:10:33.370] 512+0 records out [2025-09-24 09:10:33.386] Starting syslogd/klogd: done [2025-09-24 09:10:33.402] DML Start [2025-09-24 09:10:33.577] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:10:33.754] DML res1: 0 [2025-09-24 09:10:34.233] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:10:34.249] Read Success [2025-09-24 09:10:34.249] Verifying certificate... [2025-09-24 09:10:34.489] Verified OK [2025-09-24 09:10:34.505] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:10:36.152] Verified OK [2025-09-24 09:10:36.152] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:10:36.850] Verified OK [2025-09-24 09:10:36.850] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:10:39.471] fs.protected_hardlinks = 1 [2025-09-24 09:10:39.487] fs.protected_symlinks = 1 [2025-09-24 09:10:39.487] kernel.modules_disabled = 1 [2025-09-24 09:10:39.695] [2025-09-24 09:10:39.695] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:10:40.863] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:10:48.615] SBL1:1210.0.1.0 [2025-09-24 09:10:48.647] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:10:50.231] SBL2:1210.0.1.0 [2025-09-24 09:10:50.262] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:10:50.374] j-A [2025-09-24 09:10:57.712] The R5 Autosar Classic is running [2025-09-24 09:10:57.743] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:10:57.743] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:10:58.350] INIT: version 2.96 booting [2025-09-24 09:10:58.462] INIT: Entering runlevel: 5 [2025-09-24 09:10:58.621] mtd28 attached [2025-09-24 09:10:58.621] mtd24 attached [2025-09-24 09:10:58.637] mtd32 attached [2025-09-24 09:10:58.686] ubi0:animations is mounted. [2025-09-24 09:10:58.759] RTNETLINK answers: File exists [2025-09-24 09:10:58.759] ubi1:textures is mounted. [2025-09-24 09:10:58.759] ubi2:dml_code is mounted. [2025-09-24 09:10:58.759] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:10:58.759] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:10:58.759] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:10:58.759] data.LB_FadeInType0=100 [2025-09-24 09:10:58.759] data.CHLH_FadeInType0=0 [2025-09-24 09:10:58.759] data.WU_FadeInDelay=0 [2025-09-24 09:10:58.759] max_time_out=0 [2025-09-24 09:10:58.759] No splash screen [2025-09-24 09:10:58.759] stop dss Done [2025-09-24 09:10:58.759] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:10:58.759] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:10:58.806] /dev/mem opened. [2025-09-24 09:10:58.806] Memory mapped at address 0xffffbb1ab000. [2025-09-24 09:10:58.832] Read at address 0x00600018 (0xffffbb1ab018): 0x00000000 [2025-09-24 09:10:58.832] Write at address 0x00600018 (0xffffbb1ab018): 0x00400040, readback 0x00400040 [2025-09-24 09:10:58.894] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:10:58.894] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:10:59.081] Loaded PowerVR consumer services. [2025-09-24 09:10:59.081] 512+0 records in [2025-09-24 09:10:59.081] 512+0 records out [2025-09-24 09:10:59.128] Waiting data available... [2025-09-24 09:10:59.128] Starting syslogd/klogd: done [2025-09-24 09:10:59.144] DML Start [2025-09-24 09:10:59.321] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:10:59.544] DML res1: 0 [2025-09-24 09:11:00.008] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:11:00.024] Read Success [2025-09-24 09:11:00.024] Verifying certificate... [2025-09-24 09:11:00.296] Verified OK [2025-09-24 09:11:00.311] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:11:01.972] Verified OK [2025-09-24 09:11:01.972] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:11:02.621] Verified OK [2025-09-24 09:11:02.621] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:11:05.212] fs.protected_hardlinks = 1 [2025-09-24 09:11:05.228] fs.protected_symlinks = 1 [2025-09-24 09:11:05.228] kernel.modules_disabled = 1 [2025-09-24 09:11:05.419] [2025-09-24 09:11:05.419] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:11:06.626] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:11:14.338] SBL1:1210.0.1.0 [2025-09-24 09:11:14.370] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:11:15.952] SBL2:1210.0.1.0 [2025-09-24 09:11:15.984] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:11:16.097] j-A [2025-09-24 09:11:23.464] The R5 Autosar Classic is running [2025-09-24 09:11:23.464] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:11:23.464] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:11:24.072] INIT: version 2.96 booting [2025-09-24 09:11:24.184] INIT: Entering runlevel: 5 [2025-09-24 09:11:24.343] mtd32 attached [2025-09-24 09:11:24.359] mtd24 attached [2025-09-24 09:11:24.359] mtd28 attached [2025-09-24 09:11:24.392] ubi0:dml_code is mounted. [2025-09-24 09:11:24.408] ubi1:textures is mounted. [2025-09-24 09:11:24.472] RTNETLINK answers: File exists [2025-09-24 09:11:24.472] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:11:24.472] ubi2:animations is mounted. [2025-09-24 09:11:24.472] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:11:24.472] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:11:24.472] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:11:24.472] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:11:24.472] data.LB_FadeInType0=100 [2025-09-24 09:11:24.472] data.CHLH_FadeInType0=0 [2025-09-24 09:11:24.472] data.WU_FadeInDelay=0 [2025-09-24 09:11:24.472] max_time_out=0 [2025-09-24 09:11:24.472] No splash screen [2025-09-24 09:11:24.472] stop dss Done [2025-09-24 09:11:24.520] /dev/mem opened. [2025-09-24 09:11:24.520] Memory mapped at address 0xffff9b642000. [2025-09-24 09:11:24.559] Read at address 0x00600018 (0xffff9b642018): 0x00000000 [2025-09-24 09:11:24.559] Write at address 0x00600018 (0xffff9b642018): 0x00400040, readback 0x00400040 [2025-09-24 09:11:24.559] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:11:24.559] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:11:24.784] Loaded PowerVR consumer services. [2025-09-24 09:11:24.827] Waiting data available... [2025-09-24 09:11:24.827] 512+0 records in [2025-09-24 09:11:24.827] 512+0 records out [2025-09-24 09:11:24.843] Starting syslogd/klogd: done [2025-09-24 09:11:24.859] DML Start [2025-09-24 09:11:25.019] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:11:25.212] DML res1: 0 [2025-09-24 09:11:25.767] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:11:25.767] Read Success [2025-09-24 09:11:25.767] Verifying certificate... [2025-09-24 09:11:26.070] Verified OK [2025-09-24 09:11:26.086] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:11:27.811] Verified OK [2025-09-24 09:11:27.811] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:11:28.363] Verified OK [2025-09-24 09:11:28.363] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:11:30.921] fs.protected_hardlinks = 1 [2025-09-24 09:11:30.937] fs.protected_symlinks = 1 [2025-09-24 09:11:30.953] kernel.modules_disabled = 1 [2025-09-24 09:11:31.144] [2025-09-24 09:11:31.144] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:11:32.354] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:11:40.050] SBL1:1210.0.1.0 [2025-09-24 09:11:40.098] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:11:41.665] SBL2:1210.0.1.0 [2025-09-24 09:11:41.713] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:11:41.808] j-A [2025-09-24 09:11:49.162] The R5 Autosar Classic is running [2025-09-24 09:11:49.184] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:11:49.184] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:11:49.792] INIT: version 2.96 booting [2025-09-24 09:11:49.904] INIT: Entering runlevel: 5 [2025-09-24 09:11:50.064] mtd32 attached [2025-09-24 09:11:50.064] mtd28 attached [2025-09-24 09:11:50.080] mtd24 attached [2025-09-24 09:11:50.128] RTNETLINK answers: File exists [2025-09-24 09:11:50.191] ubi0:dml_code is mounted. [2025-09-24 09:11:50.191] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:11:50.191] ubi1:animations is mounted. [2025-09-24 09:11:50.191] ubi2:textures is mounted. [2025-09-24 09:11:50.191] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:11:50.191] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:11:50.191] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:11:50.191] data.LB_FadeInType0=100 [2025-09-24 09:11:50.191] data.CHLH_FadeInType0=0 [2025-09-24 09:11:50.191] data.WU_FadeInDelay=0 [2025-09-24 09:11:50.191] max_time_out=0 [2025-09-24 09:11:50.191] No splash screen [2025-09-24 09:11:50.191] stop dss Done [2025-09-24 09:11:50.191] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:11:50.265] /dev/mem opened. [2025-09-24 09:11:50.265] Memory mapped at address 0xffffaf4b4000. [2025-09-24 09:11:50.265] Read at address 0x00600018 (0xffffaf4b4018): 0x00000000 [2025-09-24 09:11:50.265] Write at address 0x00600018 (0xffffaf4b4018): 0x00400040, readback 0x00400040 [2025-09-24 09:11:50.294] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:11:50.294] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:11:50.374] Loaded PowerVR consumer services. [2025-09-24 09:11:50.528] Waiting data available... [2025-09-24 09:11:50.528] 512+0 records in [2025-09-24 09:11:50.528] 512+0 records out [2025-09-24 09:11:50.560] Starting syslogd/klogd: done [2025-09-24 09:11:50.592] DML Start [2025-09-24 09:11:50.751] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:11:50.976] DML res1: 0 [2025-09-24 09:11:51.440] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:11:51.460] Read Success [2025-09-24 09:11:51.460] Verifying certificate... [2025-09-24 09:11:51.731] Verified OK [2025-09-24 09:11:51.748] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:11:53.454] Verified OK [2025-09-24 09:11:53.454] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:11:54.030] Verified OK [2025-09-24 09:11:54.030] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:11:56.603] fs.protected_hardlinks = 1 [2025-09-24 09:11:56.631] fs.protected_symlinks = 1 [2025-09-24 09:11:56.631] kernel.modules_disabled = 1 [2025-09-24 09:11:56.823] [2025-09-24 09:11:56.823] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:11:58.092] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:12:05.774] SBL1:1210.0.1.0 [2025-09-24 09:12:05.822] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:12:07.388] SBL2:1210.0.1.0 [2025-09-24 09:12:07.436] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:12:07.532] j-A [2025-09-24 09:12:14.886] The R5 Autosar Classic is running [2025-09-24 09:12:14.909] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:12:14.909] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:12:15.517] INIT: version 2.96 booting [2025-09-24 09:12:15.628] INIT: Entering runlevel: 5 [2025-09-24 09:12:15.788] mtd32 attached [2025-09-24 09:12:15.804] mtd24 attached [2025-09-24 09:12:15.820] mtd28 attached [2025-09-24 09:12:15.836] ubi0:dml_code is mounted. [2025-09-24 09:12:15.917] RTNETLINK answers: File exists [2025-09-24 09:12:15.917] ubi2:animations is mounted. [2025-09-24 09:12:15.917] ubi1:textures is mounted. [2025-09-24 09:12:15.917] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:12:15.917] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:12:15.917] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:12:15.917] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:12:15.917] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:12:15.917] data.LB_FadeInType0=100 [2025-09-24 09:12:15.917] data.CHLH_FadeInType0=0 [2025-09-24 09:12:15.917] data.WU_FadeInDelay=0 [2025-09-24 09:12:15.917] max_time_out=0 [2025-09-24 09:12:15.917] No splash screen [2025-09-24 09:12:15.917] stop dss Done [2025-09-24 09:12:15.958] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:12:15.958] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:12:15.958] /dev/mem opened. [2025-09-24 09:12:15.990] Memory mapped at address 0xffff85efe000. [2025-09-24 09:12:15.990] Read at address 0x00600018 (0xffff85efe018): 0x00000000 [2025-09-24 09:12:15.990] Write at address 0x00600018 (0xffff85efe018): 0x00400040, readback 0x00400040 [2025-09-24 09:12:16.214] Loaded PowerVR consumer services. [2025-09-24 09:12:16.230] Waiting data available... [2025-09-24 09:12:16.245] 512+0 records in [2025-09-24 09:12:16.261] 512+0 records out [2025-09-24 09:12:16.293] Starting syslogd/klogd: done [2025-09-24 09:12:16.309] DML Start [2025-09-24 09:12:16.486] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:12:16.709] DML res1: 0 [2025-09-24 09:12:17.168] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:12:17.168] Read Success [2025-09-24 09:12:17.168] Verifying certificate... [2025-09-24 09:12:17.424] Verified OK [2025-09-24 09:12:17.440] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:12:19.128] Verified OK [2025-09-24 09:12:19.128] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:12:19.732] Verified OK [2025-09-24 09:12:19.732] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:12:22.291] fs.protected_hardlinks = 1 [2025-09-24 09:12:22.306] fs.protected_symlinks = 1 [2025-09-24 09:12:22.306] kernel.modules_disabled = 1 [2025-09-24 09:12:22.514] [2025-09-24 09:12:22.514] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:12:23.761] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:12:31.494] SBL1:1210.0.1.0 [2025-09-24 09:12:31.542] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:12:33.109] SBL2:1210.0.1.0 [2025-09-24 09:12:33.157] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:12:33.254] j-A [2025-09-24 09:12:40.608] The R5 Autosar Classic is running [2025-09-24 09:12:40.631] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:12:40.631] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:12:41.238] INIT: version 2.96 booting [2025-09-24 09:12:41.350] INIT: Entering runlevel: 5 [2025-09-24 09:12:41.510] mtd24 attached [2025-09-24 09:12:41.510] mtd28 attached [2025-09-24 09:12:41.525] mtd32 attached [2025-09-24 09:12:41.573] RTNETLINK answers: File exists [2025-09-24 09:12:41.638] ubi1:animations is mounted. [2025-09-24 09:12:41.638] ubi0:textures is mounted. [2025-09-24 09:12:41.638] ubi2:dml_code is mounted. [2025-09-24 09:12:41.638] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:12:41.638] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:12:41.638] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:12:41.638] data.LB_FadeInType0=100 [2025-09-24 09:12:41.638] data.CHLH_FadeInType0=0 [2025-09-24 09:12:41.638] data.WU_FadeInDelay=0 [2025-09-24 09:12:41.638] max_time_out=0 [2025-09-24 09:12:41.638] No splash screen [2025-09-24 09:12:41.638] stop dss Done [2025-09-24 09:12:41.638] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:12:41.638] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:12:41.718] /dev/mem opened. [2025-09-24 09:12:41.718] Memory mapped at address 0xffffa8a2d000. [2025-09-24 09:12:41.718] Read at address 0x00600018 (0xffffa8a2d018): 0x00000000 [2025-09-24 09:12:41.718] Write at address 0x00600018 (0xffffa8a2d018): 0x00400040, readback 0x00400040 [2025-09-24 09:12:41.718] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:12:41.718] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:12:41.910] Loaded PowerVR consumer services. [2025-09-24 09:12:41.958] Waiting data available... [2025-09-24 09:12:41.973] 512+0 records in [2025-09-24 09:12:41.973] 512+0 records out [2025-09-24 09:12:41.989] Starting syslogd/klogd: done [2025-09-24 09:12:42.021] DML Start [2025-09-24 09:12:42.181] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:12:42.469] DML res1: 0 [2025-09-24 09:12:42.820] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:12:42.820] Read Success [2025-09-24 09:12:42.836] Verifying certificate... [2025-09-24 09:12:43.124] Verified OK [2025-09-24 09:12:43.140] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:12:44.857] Verified OK [2025-09-24 09:12:44.857] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:12:45.439] Verified OK [2025-09-24 09:12:45.439] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:12:48.172] fs.protected_hardlinks = 1 [2025-09-24 09:12:48.172] fs.protected_symlinks = 1 [2025-09-24 09:12:48.188] kernel.modules_disabled = 1 [2025-09-24 09:12:48.380] [2025-09-24 09:12:48.380] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:12:49.514] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:12:57.207] SBL1:1210.0.1.0 [2025-09-24 09:12:57.255] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:12:58.821] SBL2:1210.0.1.0 [2025-09-24 09:12:58.869] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:12:58.965] j-A [2025-09-24 09:13:06.319] The R5 Autosar Classic is running [2025-09-24 09:13:06.344] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:13:06.344] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:13:06.952] INIT: version 2.96 booting [2025-09-24 09:13:07.063] INIT: Entering runlevel: 5 [2025-09-24 09:13:07.224] mtd32 attached [2025-09-24 09:13:07.224] mtd24 attached [2025-09-24 09:13:07.240] mtd28 attached [2025-09-24 09:13:07.272] ubi0:dml_code is mounted. [2025-09-24 09:13:07.288] RTNETLINK answers: File exists [2025-09-24 09:13:07.288] ubi1:textures is mounted. [2025-09-24 09:13:07.341] ubi2:animations is mounted. [2025-09-24 09:13:07.341] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:13:07.341] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:13:07.341] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:13:07.341] data.LB_FadeInType0=100 [2025-09-24 09:13:07.341] data.CHLH_FadeInType0=0 [2025-09-24 09:13:07.341] data.WU_FadeInDelay=0 [2025-09-24 09:13:07.341] max_time_out=0 [2025-09-24 09:13:07.341] No splash screen [2025-09-24 09:13:07.341] stop dss Done [2025-09-24 09:13:07.341] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:13:07.341] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:13:07.393] /dev/mem opened. [2025-09-24 09:13:07.393] Memory mapped at address 0xffffb8bff000. [2025-09-24 09:13:07.393] Read at address 0x00600018 (0xffffb8bff018): 0x00000000 [2025-09-24 09:13:07.393] Write at address 0x00600018 (0xffffb8bff018): 0x00400040, readback 0x00400040 [2025-09-24 09:13:07.457] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:13:07.457] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:13:07.671] Waiting data available... [2025-09-24 09:13:07.671] Loaded PowerVR consumer services. [2025-09-24 09:13:07.687] 512+0 records in [2025-09-24 09:13:07.687] 512+0 records out [2025-09-24 09:13:07.735] Starting syslogd/klogd: done [2025-09-24 09:13:07.752] DML Start [2025-09-24 09:13:07.927] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:13:08.135] DML res1: 0 [2025-09-24 09:13:08.606] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:13:08.606] Read Success [2025-09-24 09:13:08.606] Verifying certificate... [2025-09-24 09:13:08.862] Verified OK [2025-09-24 09:13:08.862] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:13:10.587] Verified OK [2025-09-24 09:13:10.587] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:13:11.185] Verified OK [2025-09-24 09:13:11.185] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:13:13.694] fs.protected_hardlinks = 1 [2025-09-24 09:13:13.710] fs.protected_symlinks = 1 [2025-09-24 09:13:13.710] kernel.modules_disabled = 1 [2025-09-24 09:13:13.903] [2025-09-24 09:13:13.903] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:13:15.253] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:13:22.906] SBL1:1210.0.1.0 [2025-09-24 09:13:22.954] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:13:24.521] SBL2:1210.0.1.0 [2025-09-24 09:13:24.568] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:13:24.665] j-A [2025-09-24 09:13:32.019] The R5 Autosar Classic is running [2025-09-24 09:13:32.041] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:13:32.041] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:13:32.649] INIT: version 2.96 booting [2025-09-24 09:13:32.760] INIT: Entering runlevel: 5 [2025-09-24 09:13:32.921] mtd24 attached [2025-09-24 09:13:32.921] mtd28 attached [2025-09-24 09:13:32.937] mtd32 attached [2025-09-24 09:13:33.033] RTNETLINK answers: File exists [2025-09-24 09:13:33.033] ubi0:textures is mounted. [2025-09-24 09:13:33.033] ubi1:animations is mounted. [2025-09-24 09:13:33.033] ubi2:dml_code is mounted. [2025-09-24 09:13:33.033] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:13:33.033] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:13:33.033] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:13:33.033] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:13:33.033] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:13:33.057] data.LB_FadeInType0=100 [2025-09-24 09:13:33.057] data.CHLH_FadeInType0=0 [2025-09-24 09:13:33.057] data.WU_FadeInDelay=0 [2025-09-24 09:13:33.057] max_time_out=0 [2025-09-24 09:13:33.057] No splash screen [2025-09-24 09:13:33.057] stop dss Done [2025-09-24 09:13:33.089] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:13:33.089] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:13:33.146] /dev/mem opened. [2025-09-24 09:13:33.146] Memory mapped at address 0xffffbf296000. [2025-09-24 09:13:33.146] Read at address 0x00600018 (0xffffbf296018): 0x00000000 [2025-09-24 09:13:33.146] Write at address 0x00600018 (0xffffbf296018): 0x00400040, readback 0x00400040 [2025-09-24 09:13:33.226] Loaded PowerVR consumer services. [2025-09-24 09:13:33.384] 512+0 records in [2025-09-24 09:13:33.384] 512+0 records out [2025-09-24 09:13:33.384] Waiting data available... [2025-09-24 09:13:33.416] Starting syslogd/klogd: done [2025-09-24 09:13:33.432] DML Start [2025-09-24 09:13:33.608] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:13:33.864] DML res1: 0 [2025-09-24 09:13:34.215] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:13:34.215] Read Success [2025-09-24 09:13:34.231] Verifying certificate... [2025-09-24 09:13:34.455] Verified OK [2025-09-24 09:13:34.471] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:13:36.170] Verified OK [2025-09-24 09:13:36.170] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:13:36.760] Verified OK [2025-09-24 09:13:36.760] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:13:39.477] fs.protected_hardlinks = 1 [2025-09-24 09:13:39.477] fs.protected_symlinks = 1 [2025-09-24 09:13:39.493] kernel.modules_disabled = 1 [2025-09-24 09:13:39.686] [2025-09-24 09:13:39.686] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:13:40.936] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:13:48.631] SBL1:1210.0.1.0 [2025-09-24 09:13:48.663] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:13:50.245] SBL2:1210.0.1.0 [2025-09-24 09:13:50.277] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:13:50.390] j-A [2025-09-24 09:13:57.762] The R5 Autosar Classic is running [2025-09-24 09:13:57.762] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:13:57.762] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:13:58.369] INIT: version 2.96 booting [2025-09-24 09:13:58.480] INIT: Entering runlevel: 5 [2025-09-24 09:13:58.641] mtd32 attached [2025-09-24 09:13:58.641] mtd24 attached [2025-09-24 09:13:58.657] mtd28 attached [2025-09-24 09:13:58.704] ubi0:dml_code is mounted. [2025-09-24 09:13:58.704] RTNETLINK answers: File exists [2025-09-24 09:13:58.704] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:13:58.762] ubi1:textures is mounted. [2025-09-24 09:13:58.762] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:13:58.762] ubi2:animations is mounted. [2025-09-24 09:13:58.762] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:13:58.762] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:13:58.762] data.LB_FadeInType0=100 [2025-09-24 09:13:58.762] data.CHLH_FadeInType0=0 [2025-09-24 09:13:58.762] data.WU_FadeInDelay=0 [2025-09-24 09:13:58.762] max_time_out=0 [2025-09-24 09:13:58.762] No splash screen [2025-09-24 09:13:58.762] stop dss Done [2025-09-24 09:13:58.762] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:13:58.840] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:13:58.840] /dev/mem opened. [2025-09-24 09:13:58.840] Memory mapped at address 0xffff94686000. [2025-09-24 09:13:58.840] Read at address 0x00600018 (0xffff94686018): 0x00000000 [2025-09-24 09:13:58.840] Write at address 0x00600018 (0xffff94686018): 0x00400040, readback 0x00400040 [2025-09-24 09:13:58.840] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:13:58.984] Loaded PowerVR consumer services. [2025-09-24 09:13:59.095] Waiting data available... [2025-09-24 09:13:59.127] 512+0 records in [2025-09-24 09:13:59.127] 512+0 records out [2025-09-24 09:13:59.143] Starting syslogd/klogd: done [2025-09-24 09:13:59.159] DML Start [2025-09-24 09:13:59.335] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:13:59.591] DML res1: 0 [2025-09-24 09:14:00.034] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:14:00.034] Read Success [2025-09-24 09:14:00.034] Verifying certificate... [2025-09-24 09:14:00.306] Verified OK [2025-09-24 09:14:00.322] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:14:01.883] Verified OK [2025-09-24 09:14:01.883] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:14:02.506] Verified OK [2025-09-24 09:14:02.522] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:14:05.112] fs.protected_hardlinks = 1 [2025-09-24 09:14:05.112] fs.protected_symlinks = 1 [2025-09-24 09:14:05.128] kernel.modules_disabled = 1 [2025-09-24 09:14:05.304] [2025-09-24 09:14:05.304] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:14:06.612] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:14:14.328] SBL1:1210.0.1.0 [2025-09-24 09:14:14.376] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:14:15.943] SBL2:1210.0.1.0 [2025-09-24 09:14:15.975] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:14:16.086] j-A [2025-09-24 09:14:23.460] The R5 Autosar Classic is running [2025-09-24 09:14:23.460] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:14:23.460] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:14:24.068] INIT: version 2.96 booting [2025-09-24 09:14:24.179] INIT: Entering runlevel: 5 [2025-09-24 09:14:24.323] mtd32 attached [2025-09-24 09:14:24.339] mtd28 attached [2025-09-24 09:14:24.355] mtd24 attached [2025-09-24 09:14:24.403] RTNETLINK answers: File exists [2025-09-24 09:14:24.468] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:14:24.468] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:14:24.468] ubi0:dml_code is mounted. [2025-09-24 09:14:24.468] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:14:24.468] ubi1:animations is mounted. [2025-09-24 09:14:24.468] ubi2:textures is mounted. [2025-09-24 09:14:24.468] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:14:24.468] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:14:24.468] data.LB_FadeInType0=100 [2025-09-24 09:14:24.468] data.CHLH_FadeInType0=0 [2025-09-24 09:14:24.468] data.WU_FadeInDelay=0 [2025-09-24 09:14:24.468] max_time_out=0 [2025-09-24 09:14:24.468] No splash screen [2025-09-24 09:14:24.468] stop dss Done [2025-09-24 09:14:24.535] /dev/mem opened. [2025-09-24 09:14:24.535] Memory mapped at address 0xffff9caaa000. [2025-09-24 09:14:24.535] Read at address 0x00600018 (0xffff9caaa018): 0x00000000 [2025-09-24 09:14:24.535] Write at address 0x00600018 (0xffff9caaa018): 0x00400040, readback 0x00400040 [2025-09-24 09:14:24.535] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:14:24.551] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:14:24.727] Loaded PowerVR consumer services. [2025-09-24 09:14:24.818] 512+0 records in [2025-09-24 09:14:24.818] 512+0 records out [2025-09-24 09:14:24.818] Waiting data available... [2025-09-24 09:14:24.834] Starting syslogd/klogd: done [2025-09-24 09:14:24.850] DML Start [2025-09-24 09:14:25.026] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:14:25.250] DML res1: 0 [2025-09-24 09:14:25.725] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:14:25.725] Read Success [2025-09-24 09:14:25.725] Verifying certificate... [2025-09-24 09:14:25.981] Verified OK [2025-09-24 09:14:25.997] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:14:27.688] Verified OK [2025-09-24 09:14:27.688] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:14:28.263] Verified OK [2025-09-24 09:14:28.263] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:14:30.833] fs.protected_hardlinks = 1 [2025-09-24 09:14:30.833] fs.protected_symlinks = 1 [2025-09-24 09:14:30.833] kernel.modules_disabled = 1 [2025-09-24 09:14:31.025] [2025-09-24 09:14:31.025] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:14:32.326] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:14:40.031] SBL1:1210.0.1.0 [2025-09-24 09:14:40.079] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:14:41.645] SBL2:1210.0.1.0 [2025-09-24 09:14:41.693] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:14:41.806] j-A [2025-09-24 09:14:49.145] The R5 Autosar Classic is running [2025-09-24 09:14:49.170] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:14:49.170] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:14:49.777] INIT: version 2.96 booting [2025-09-24 09:14:49.905] INIT: Entering runlevel: 5 [2025-09-24 09:14:50.049] mtd28 attached [2025-09-24 09:14:50.065] mtd32 attached [2025-09-24 09:14:50.081] mtd24 attached [2025-09-24 09:14:50.097] ubi0:animations is mounted. [2025-09-24 09:14:50.175] RTNETLINK answers: File exists [2025-09-24 09:14:50.175] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:14:50.175] ubi1:dml_code is mounted. [2025-09-24 09:14:50.175] ubi2:textures is mounted. [2025-09-24 09:14:50.175] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:14:50.175] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:14:50.175] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:14:50.175] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:14:50.175] data.LB_FadeInType0=100 [2025-09-24 09:14:50.175] data.CHLH_FadeInType0=0 [2025-09-24 09:14:50.175] data.WU_FadeInDelay=0 [2025-09-24 09:14:50.175] max_time_out=0 [2025-09-24 09:14:50.175] No splash screen [2025-09-24 09:14:50.175] stop dss Done [2025-09-24 09:14:50.236] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:14:50.236] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:14:50.236] /dev/mem opened. [2025-09-24 09:14:50.236] Memory mapped at address 0xffffb9a60000. [2025-09-24 09:14:50.236] Read at address 0x00600018 (0xffffb9a60018): 0x00000000 [2025-09-24 09:14:50.236] Write at address 0x00600018 (0xffffb9a60018): 0x00400040, readback 0x00400040 [2025-09-24 09:14:50.331] Loaded PowerVR consumer services. [2025-09-24 09:14:50.504] 512+0 records in [2025-09-24 09:14:50.504] 512+0 records out [2025-09-24 09:14:50.504] Waiting data available... [2025-09-24 09:14:50.553] Starting syslogd/klogd: done [2025-09-24 09:14:50.569] DML Start [2025-09-24 09:14:50.744] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:14:50.968] DML res1: 0 [2025-09-24 09:14:51.454] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:14:51.454] Read Success [2025-09-24 09:14:51.454] Verifying certificate... [2025-09-24 09:14:51.678] Verified OK [2025-09-24 09:14:51.694] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:14:53.462] Verified OK [2025-09-24 09:14:53.462] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:14:54.038] Verified OK [2025-09-24 09:14:54.038] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:14:56.676] fs.protected_hardlinks = 1 [2025-09-24 09:14:56.692] fs.protected_symlinks = 1 [2025-09-24 09:14:56.692] kernel.modules_disabled = 1 [2025-09-24 09:14:56.900] [2025-09-24 09:14:56.900] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:14:58.033] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:15:05.749] SBL1:1210.0.1.0 [2025-09-24 09:15:05.780] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:15:07.364] SBL2:1210.0.1.0 [2025-09-24 09:15:07.396] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:15:07.507] j-A [2025-09-24 09:15:14.877] The R5 Autosar Classic is running [2025-09-24 09:15:14.877] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:15:14.877] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:15:15.485] INIT: version 2.96 booting [2025-09-24 09:15:15.596] INIT: Entering runlevel: 5 [2025-09-24 09:15:15.756] mtd24 attached [2025-09-24 09:15:15.756] mtd28 attached [2025-09-24 09:15:15.788] mtd32 attached [2025-09-24 09:15:15.788] ubi0:textures is mounted. [2025-09-24 09:15:15.819] RTNETLINK answers: File exists [2025-09-24 09:15:15.864] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:15:15.864] ubi1:animations is mounted. [2025-09-24 09:15:15.864] ubi2:dml_code is mounted. [2025-09-24 09:15:15.864] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:15:15.864] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:15:15.864] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:15:15.864] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:15:15.889] data.LB_FadeInType0=100 [2025-09-24 09:15:15.889] data.CHLH_FadeInType0=0 [2025-09-24 09:15:15.889] data.WU_FadeInDelay=0 [2025-09-24 09:15:15.889] max_time_out=0 [2025-09-24 09:15:15.889] No splash screen [2025-09-24 09:15:15.889] stop dss Done [2025-09-24 09:15:15.905] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:15:15.926] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:15:15.967] /dev/mem opened. [2025-09-24 09:15:15.967] Memory mapped at address 0xffff9cabe000. [2025-09-24 09:15:15.967] Read at address 0x00600018 (0xffff9cabe018): 0x00000000 [2025-09-24 09:15:15.967] Write at address 0x00600018 (0xffff9cabe018): 0x00400040, readback 0x00400040 [2025-09-24 09:15:16.031] Loaded PowerVR consumer services. [2025-09-24 09:15:16.204] Waiting data available... [2025-09-24 09:15:16.204] 512+0 records in [2025-09-24 09:15:16.204] 512+0 records out [2025-09-24 09:15:16.236] Starting syslogd/klogd: done [2025-09-24 09:15:16.252] DML Start [2025-09-24 09:15:16.428] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:15:16.636] DML res1: 0 [2025-09-24 09:15:17.112] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:15:17.112] Read Success [2025-09-24 09:15:17.112] Verifying certificate... [2025-09-24 09:15:17.368] Verified OK [2025-09-24 09:15:17.384] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:15:19.007] Verified OK [2025-09-24 09:15:19.007] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:15:19.564] Verified OK [2025-09-24 09:15:19.564] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:15:22.283] fs.protected_hardlinks = 1 [2025-09-24 09:15:22.298] fs.protected_symlinks = 1 [2025-09-24 09:15:22.298] kernel.modules_disabled = 1 [2025-09-24 09:15:22.491] [2025-09-24 09:15:22.491] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:15:23.752] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:15:31.442] SBL1:1210.0.1.0 [2025-09-24 09:15:31.490] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:15:33.057] SBL2:1210.0.1.0 [2025-09-24 09:15:33.105] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:15:33.202] j-A [2025-09-24 09:15:40.556] The R5 Autosar Classic is running [2025-09-24 09:15:40.581] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:15:40.581] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:15:41.188] INIT: version 2.96 booting [2025-09-24 09:15:41.301] INIT: Entering runlevel: 5 [2025-09-24 09:15:41.460] mtd32 attached [2025-09-24 09:15:41.460] mtd28 attached [2025-09-24 09:15:41.476] mtd24 attached [2025-09-24 09:15:41.524] RTNETLINK answers: File exists [2025-09-24 09:15:41.524] ubi1:animations is mounted. [2025-09-24 09:15:41.588] ubi0:dml_code is mounted. [2025-09-24 09:15:41.588] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:15:41.588] ubi2:textures is mounted. [2025-09-24 09:15:41.588] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:15:41.588] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:15:41.588] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:15:41.588] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:15:41.588] data.LB_FadeInType0=100 [2025-09-24 09:15:41.588] data.CHLH_FadeInType0=0 [2025-09-24 09:15:41.588] data.WU_FadeInDelay=0 [2025-09-24 09:15:41.588] max_time_out=0 [2025-09-24 09:15:41.588] No splash screen [2025-09-24 09:15:41.588] stop dss Done [2025-09-24 09:15:41.680] /dev/mem opened. [2025-09-24 09:15:41.680] Memory mapped at address 0xffffb1c7f000. [2025-09-24 09:15:41.680] Read at address 0x00600018 (0xffffb1c7f018): 0x00000000 [2025-09-24 09:15:41.680] Write at address 0x00600018 (0xffffb1c7f018): 0x00400040, readback 0x00400040 [2025-09-24 09:15:41.680] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:15:41.680] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:15:41.856] Loaded PowerVR consumer services. [2025-09-24 09:15:41.920] 512+0 records in [2025-09-24 09:15:41.936] 512+0 records out [2025-09-24 09:15:41.936] Waiting data available... [2025-09-24 09:15:41.968] Starting syslogd/klogd: done [2025-09-24 09:15:42.000] DML Start [2025-09-24 09:15:42.160] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:15:42.399] DML res1: 0 [2025-09-24 09:15:42.846] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:15:42.846] Read Success [2025-09-24 09:15:42.846] Verifying certificate... [2025-09-24 09:15:43.069] Verified OK [2025-09-24 09:15:43.085] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:15:44.666] Verified OK [2025-09-24 09:15:44.666] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:15:45.242] Verified OK [2025-09-24 09:15:45.242] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:15:48.071] fs.protected_hardlinks = 1 [2025-09-24 09:15:48.072] fs.protected_symlinks = 1 [2025-09-24 09:15:48.087] kernel.modules_disabled = 1 [2025-09-24 09:15:48.280] [2025-09-24 09:15:48.280] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:15:49.510] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:15:57.158] SBL1:1210.0.1.0 [2025-09-24 09:15:57.190] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:15:58.773] SBL2:1210.0.1.0 [2025-09-24 09:15:58.805] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:15:58.917] j-A [2025-09-24 09:16:06.289] The R5 Autosar Classic is running [2025-09-24 09:16:06.289] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:16:06.289] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:16:06.896] INIT: version 2.96 booting [2025-09-24 09:16:07.008] INIT: Entering runlevel: 5 [2025-09-24 09:16:07.152] mtd28 attached [2025-09-24 09:16:07.168] mtd32 attached [2025-09-24 09:16:07.184] mtd24 attached [2025-09-24 09:16:07.200] ubi0:animations is mounted. [2025-09-24 09:16:07.283] ubi1:dml_code is mounted. [2025-09-24 09:16:07.283] RTNETLINK answers: File exists [2025-09-24 09:16:07.283] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:16:07.283] ubi2:textures is mounted. [2025-09-24 09:16:07.283] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:16:07.283] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:16:07.283] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:16:07.283] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:16:07.283] data.LB_FadeInType0=100 [2025-09-24 09:16:07.283] data.CHLH_FadeInType0=0 [2025-09-24 09:16:07.283] data.WU_FadeInDelay=0 [2025-09-24 09:16:07.283] max_time_out=0 [2025-09-24 09:16:07.283] No splash screen [2025-09-24 09:16:07.283] stop dss Done [2025-09-24 09:16:07.328] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:16:07.328] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:16:07.363] /dev/mem opened. [2025-09-24 09:16:07.363] Memory mapped at address 0xffffb14b0000. [2025-09-24 09:16:07.363] Read at address 0x00600018 (0xffffb14b0018): 0x00000000 [2025-09-24 09:16:07.363] Write at address 0x00600018 (0xffffb14b0018): 0x00400040, readback 0x00400040 [2025-09-24 09:16:07.460] Loaded PowerVR consumer services. [2025-09-24 09:16:07.604] 512+0 records in [2025-09-24 09:16:07.604] 512+0 records out [2025-09-24 09:16:07.619] Waiting data available... [2025-09-24 09:16:07.651] Starting syslogd/klogd: done [2025-09-24 09:16:07.667] DML Start [2025-09-24 09:16:07.876] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:16:08.099] DML res1: 0 [2025-09-24 09:16:08.530] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:16:08.530] Read Success [2025-09-24 09:16:08.530] Verifying certificate... [2025-09-24 09:16:08.802] Verified OK [2025-09-24 09:16:08.818] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:16:10.571] Verified OK [2025-09-24 09:16:10.571] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:16:11.083] Verified OK [2025-09-24 09:16:11.104] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:16:13.502] fs.protected_hardlinks = 1 [2025-09-24 09:16:13.502] fs.protected_symlinks = 1 [2025-09-24 09:16:13.502] kernel.modules_disabled = 1 [2025-09-24 09:16:13.693] [2025-09-24 09:16:13.693] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:16:15.143] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:16:22.885] SBL1:1210.0.1.0 [2025-09-24 09:16:22.917] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:16:24.500] SBL2:1210.0.1.0 [2025-09-24 09:16:24.532] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:16:24.644] j-A [2025-09-24 09:16:31.981] The R5 Autosar Classic is running [2025-09-24 09:16:32.012] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:16:32.012] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:16:32.620] INIT: version 2.96 booting [2025-09-24 09:16:32.731] INIT: Entering runlevel: 5 [2025-09-24 09:16:32.892] mtd28 attached [2025-09-24 09:16:32.892] mtd32 attached [2025-09-24 09:16:32.908] mtd24 attached [2025-09-24 09:16:32.956] RTNETLINK answers: File exists [2025-09-24 09:16:33.022] ubi0:animations is mounted. [2025-09-24 09:16:33.022] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:16:33.022] ubi1:dml_code is mounted. [2025-09-24 09:16:33.022] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:16:33.022] ubi2:textures is mounted. [2025-09-24 09:16:33.022] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:16:33.022] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:16:33.022] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:16:33.022] data.LB_FadeInType0=100 [2025-09-24 09:16:33.022] data.CHLH_FadeInType0=0 [2025-09-24 09:16:33.022] data.WU_FadeInDelay=0 [2025-09-24 09:16:33.022] max_time_out=0 [2025-09-24 09:16:33.022] No splash screen [2025-09-24 09:16:33.022] stop dss Done [2025-09-24 09:16:33.053] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:16:33.095] /dev/mem opened. [2025-09-24 09:16:33.095] Memory mapped at address 0xffffbc057000. [2025-09-24 09:16:33.095] Read at address 0x00600018 (0xffffbc057018): 0x00000000 [2025-09-24 09:16:33.095] Write at address 0x00600018 (0xffffbc057018): 0x00400040, readback 0x00400040 [2025-09-24 09:16:33.095] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:16:33.287] Loaded PowerVR consumer services. [2025-09-24 09:16:33.335] Waiting data available... [2025-09-24 09:16:33.351] 512+0 records in [2025-09-24 09:16:33.351] 512+0 records out [2025-09-24 09:16:33.367] Starting syslogd/klogd: done [2025-09-24 09:16:33.399] DML Start [2025-09-24 09:16:33.559] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:16:33.831] DML res1: 0 [2025-09-24 09:16:34.246] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:16:34.267] Read Success [2025-09-24 09:16:34.267] Verifying certificate... [2025-09-24 09:16:34.507] Verified OK [2025-09-24 09:16:34.539] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:16:36.351] Verified OK [2025-09-24 09:16:36.351] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:16:36.855] Verified OK [2025-09-24 09:16:36.855] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:16:39.236] fs.protected_hardlinks = 1 [2025-09-24 09:16:39.268] fs.protected_symlinks = 1 [2025-09-24 09:16:39.268] kernel.modules_disabled = 1 [2025-09-24 09:16:39.459] [2025-09-24 09:16:39.460] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:16:40.887] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:16:48.595] SBL1:1210.0.1.0 [2025-09-24 09:16:48.627] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:16:50.210] SBL2:1210.0.1.0 [2025-09-24 09:16:50.242] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:16:50.354] j-A [2025-09-24 09:16:57.722] The R5 Autosar Classic is running [2025-09-24 09:16:57.722] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:16:57.722] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:16:58.330] INIT: version 2.96 booting [2025-09-24 09:16:58.442] INIT: Entering runlevel: 5 [2025-09-24 09:16:58.602] mtd32 attached [2025-09-24 09:16:58.602] mtd28 attached [2025-09-24 09:16:58.618] mtd24 attached [2025-09-24 09:16:58.666] RTNETLINK answers: File exists [2025-09-24 09:16:58.731] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:16:58.731] ubi2:textures is mounted. [2025-09-24 09:16:58.731] ubi0:dml_code is mounted. [2025-09-24 09:16:58.731] ubi1:animations is mounted. [2025-09-24 09:16:58.731] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:16:58.731] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:16:58.731] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:16:58.731] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:16:58.731] data.LB_FadeInType0=100 [2025-09-24 09:16:58.731] data.CHLH_FadeInType0=0 [2025-09-24 09:16:58.731] data.WU_FadeInDelay=0 [2025-09-24 09:16:58.731] max_time_out=0 [2025-09-24 09:16:58.731] No splash screen [2025-09-24 09:16:58.731] stop dss Done [2025-09-24 09:16:58.762] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:16:58.795] /dev/mem opened. [2025-09-24 09:16:58.795] Memory mapped at address 0xffffb2ff0000. [2025-09-24 09:16:58.795] Read at address 0x00600018 (0xffffb2ff0018): 0x00000000 [2025-09-24 09:16:58.795] Write at address 0x00600018 (0xffffb2ff0018): 0x00400040, readback 0x00400040 [2025-09-24 09:16:58.795] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:16:59.034] Loaded PowerVR consumer services. [2025-09-24 09:16:59.066] Waiting data available... [2025-09-24 09:16:59.066] 512+0 records in [2025-09-24 09:16:59.082] 512+0 records out [2025-09-24 09:16:59.114] Starting syslogd/klogd: done [2025-09-24 09:16:59.130] DML Start [2025-09-24 09:16:59.322] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:16:59.515] DML res1: 0 [2025-09-24 09:17:00.008] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:17:00.008] Read Success [2025-09-24 09:17:00.008] Verifying certificate... [2025-09-24 09:17:00.232] Verified OK [2025-09-24 09:17:00.248] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:17:01.927] Verified OK [2025-09-24 09:17:01.927] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:17:02.519] Verified OK [2025-09-24 09:17:02.519] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:17:05.172] fs.protected_hardlinks = 1 [2025-09-24 09:17:05.172] fs.protected_symlinks = 1 [2025-09-24 09:17:05.188] kernel.modules_disabled = 1 [2025-09-24 09:17:05.380] [2025-09-24 09:17:05.380] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:17:06.595] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:17:14.311] SBL1:1210.0.1.0 [2025-09-24 09:17:14.359] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:17:15.925] SBL2:1210.0.1.0 [2025-09-24 09:17:15.973] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:17:16.070] j-A [2025-09-24 09:17:23.423] The R5 Autosar Classic is running [2025-09-24 09:17:23.446] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:17:23.446] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:17:24.053] INIT: version 2.96 booting [2025-09-24 09:17:24.165] INIT: Entering runlevel: 5 [2025-09-24 09:17:24.324] mtd24 attached [2025-09-24 09:17:24.324] mtd28 attached [2025-09-24 09:17:24.340] mtd32 attached [2025-09-24 09:17:24.389] RTNETLINK answers: File exists [2025-09-24 09:17:24.456] ubi1:animations is mounted. [2025-09-24 09:17:24.456] ubi0:textures is mounted. [2025-09-24 09:17:24.456] ubi2:dml_code is mounted. [2025-09-24 09:17:24.456] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:17:24.456] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:17:24.456] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:17:24.456] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:17:24.456] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:17:24.456] data.LB_FadeInType0=100 [2025-09-24 09:17:24.456] data.CHLH_FadeInType0=0 [2025-09-24 09:17:24.456] data.WU_FadeInDelay=0 [2025-09-24 09:17:24.456] max_time_out=0 [2025-09-24 09:17:24.456] No splash screen [2025-09-24 09:17:24.456] stop dss Done [2025-09-24 09:17:24.527] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:17:24.527] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:17:24.527] /dev/mem opened. [2025-09-24 09:17:24.527] Memory mapped at address 0xffffb0e74000. [2025-09-24 09:17:24.527] Read at address 0x00600018 (0xffffb0e74018): 0x00000000 [2025-09-24 09:17:24.527] Write at address 0x00600018 (0xffffb0e74018): 0x00400040, readback 0x00400040 [2025-09-24 09:17:24.638] Loaded PowerVR consumer services. [2025-09-24 09:17:24.766] 512+0 records in [2025-09-24 09:17:24.766] 512+0 records out [2025-09-24 09:17:24.783] Waiting data available... [2025-09-24 09:17:24.815] Starting syslogd/klogd: done [2025-09-24 09:17:24.831] DML Start [2025-09-24 09:17:25.022] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:17:25.246] DML res1: 0 [2025-09-24 09:17:25.678] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:17:25.694] Read Success [2025-09-24 09:17:25.694] Verifying certificate... [2025-09-24 09:17:25.966] Verified OK [2025-09-24 09:17:25.982] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:17:27.691] Verified OK [2025-09-24 09:17:27.691] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:17:28.299] Verified OK [2025-09-24 09:17:28.299] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:17:30.841] fs.protected_hardlinks = 1 [2025-09-24 09:17:30.841] fs.protected_symlinks = 1 [2025-09-24 09:17:30.857] kernel.modules_disabled = 1 [2025-09-24 09:17:31.049] [2025-09-24 09:17:31.049] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:17:32.333] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:17:40.035] SBL1:1210.0.1.0 [2025-09-24 09:17:40.067] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:17:41.649] SBL2:1210.0.1.0 [2025-09-24 09:17:41.681] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:17:41.792] j-A [2025-09-24 09:17:49.163] The R5 Autosar Classic is running [2025-09-24 09:17:49.163] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:17:49.163] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:17:49.771] INIT: version 2.96 booting [2025-09-24 09:17:49.882] INIT: Entering runlevel: 5 [2025-09-24 09:17:50.042] mtd28 attached [2025-09-24 09:17:50.058] mtd24 attached [2025-09-24 09:17:50.074] mtd32 attached [2025-09-24 09:17:50.107] ubi1:textures is mounted. [2025-09-24 09:17:50.173] ubi0:animations is mounted. [2025-09-24 09:17:50.173] RTNETLINK answers: File exists [2025-09-24 09:17:50.173] ubi2:dml_code is mounted. [2025-09-24 09:17:50.173] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:17:50.173] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:17:50.173] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:17:50.173] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:17:50.173] data.LB_FadeInType0=100 [2025-09-24 09:17:50.173] data.CHLH_FadeInType0=0 [2025-09-24 09:17:50.173] data.WU_FadeInDelay=0 [2025-09-24 09:17:50.173] max_time_out=0 [2025-09-24 09:17:50.173] No splash screen [2025-09-24 09:17:50.173] stop dss Done [2025-09-24 09:17:50.173] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:17:50.238] /dev/mem opened. [2025-09-24 09:17:50.238] Memory mapped at address 0xffffa3a9e000. [2025-09-24 09:17:50.238] Read at address 0x00600018 (0xffffa3a9e018): 0x00000000 [2025-09-24 09:17:50.238] Write at address 0x00600018 (0xffffa3a9e018): 0x00400040, readback 0x00400040 [2025-09-24 09:17:50.238] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:17:50.254] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:17:50.399] Loaded PowerVR consumer services. [2025-09-24 09:17:50.494] Waiting data available... [2025-09-24 09:17:50.510] 512+0 records in [2025-09-24 09:17:50.510] 512+0 records out [2025-09-24 09:17:50.542] Starting syslogd/klogd: done [2025-09-24 09:17:50.558] DML Start [2025-09-24 09:17:50.734] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:17:50.958] DML res1: 0 [2025-09-24 09:17:51.403] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:17:51.403] Read Success [2025-09-24 09:17:51.403] Verifying certificate... [2025-09-24 09:17:51.642] Verified OK [2025-09-24 09:17:51.658] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:17:53.337] Verified OK [2025-09-24 09:17:53.353] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:17:53.983] Verified OK [2025-09-24 09:17:53.983] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:17:56.652] fs.protected_hardlinks = 1 [2025-09-24 09:17:56.684] fs.protected_symlinks = 1 [2025-09-24 09:17:56.684] kernel.modules_disabled = 1 [2025-09-24 09:17:56.859] [2025-09-24 09:17:56.859] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:17:58.087] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:18:05.717] SBL1:1210.0.1.0 [2025-09-24 09:18:05.765] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:18:07.332] SBL2:1210.0.1.0 [2025-09-24 09:18:07.380] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:18:07.476] j-A [2025-09-24 09:18:14.829] The R5 Autosar Classic is running [2025-09-24 09:18:14.854] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:18:14.854] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:18:15.461] INIT: version 2.96 booting [2025-09-24 09:18:15.573] INIT: Entering runlevel: 5 [2025-09-24 09:18:15.733] mtd24 attached [2025-09-24 09:18:15.733] mtd28 attached [2025-09-24 09:18:15.749] mtd32 attached [2025-09-24 09:18:15.797] RTNETLINK answers: File exists [2025-09-24 09:18:15.813] ubi0:textures is mounted. [2025-09-24 09:18:15.813] ubi1:animations is mounted. [2025-09-24 09:18:15.868] ubi2:dml_code is mounted. [2025-09-24 09:18:15.868] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:18:15.868] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:18:15.868] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:18:15.868] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:18:15.868] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:18:15.868] data.LB_FadeInType0=100 [2025-09-24 09:18:15.868] data.CHLH_FadeInType0=0 [2025-09-24 09:18:15.868] data.WU_FadeInDelay=0 [2025-09-24 09:18:15.868] max_time_out=0 [2025-09-24 09:18:15.868] No splash screen [2025-09-24 09:18:15.868] stop dss Done [2025-09-24 09:18:15.916] /dev/mem opened. [2025-09-24 09:18:15.916] Memory mapped at address 0xffffb5624000. [2025-09-24 09:18:15.942] Read at address 0x00600018 (0xffffb5624018): 0x00000000 [2025-09-24 09:18:15.942] Write at address 0x00600018 (0xffffb5624018): 0x00400040, readback 0x00400040 [2025-09-24 09:18:15.986] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:18:15.986] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:18:16.034] Loaded PowerVR consumer services. [2025-09-24 09:18:16.178] Waiting data available... [2025-09-24 09:18:16.178] 512+0 records in [2025-09-24 09:18:16.178] 512+0 records out [2025-09-24 09:18:16.226] Starting syslogd/klogd: done [2025-09-24 09:18:16.242] DML Start [2025-09-24 09:18:16.417] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:18:16.641] DML res1: 0 [2025-09-24 09:18:17.136] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:18:17.136] Read Success [2025-09-24 09:18:17.136] Verifying certificate... [2025-09-24 09:18:17.360] Verified OK [2025-09-24 09:18:17.376] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:18:18.997] Verified OK [2025-09-24 09:18:18.997] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:18:19.629] Verified OK [2025-09-24 09:18:19.629] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:18:22.347] fs.protected_hardlinks = 1 [2025-09-24 09:18:22.347] fs.protected_symlinks = 1 [2025-09-24 09:18:22.363] kernel.modules_disabled = 1 [2025-09-24 09:18:22.554] [2025-09-24 09:18:22.554] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:18:23.695] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:18:31.422] SBL1:1210.0.1.0 [2025-09-24 09:18:31.470] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:18:33.036] SBL2:1210.0.1.0 [2025-09-24 09:18:33.068] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:18:33.181] j-A [2025-09-24 09:18:40.534] The R5 Autosar Classic is running [2025-09-24 09:18:40.534] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:18:40.555] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:18:41.163] INIT: version 2.96 booting [2025-09-24 09:18:41.274] INIT: Entering runlevel: 5 [2025-09-24 09:18:41.434] mtd32 attached [2025-09-24 09:18:41.434] mtd24 attached [2025-09-24 09:18:41.450] mtd28 attached [2025-09-24 09:18:41.482] ubi0:dml_code is mounted. [2025-09-24 09:18:41.498] RTNETLINK answers: File exists [2025-09-24 09:18:41.560] ubi1:textures is mounted. [2025-09-24 09:18:41.560] ubi2:animations is mounted. [2025-09-24 09:18:41.560] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:18:41.560] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:18:41.560] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:18:41.560] data.LB_FadeInType0=100 [2025-09-24 09:18:41.560] data.CHLH_FadeInType0=0 [2025-09-24 09:18:41.560] data.WU_FadeInDelay=0 [2025-09-24 09:18:41.560] max_time_out=0 [2025-09-24 09:18:41.560] No splash screen [2025-09-24 09:18:41.560] stop dss Done [2025-09-24 09:18:41.560] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:18:41.560] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:18:41.608] /dev/mem opened. [2025-09-24 09:18:41.608] Memory mapped at address 0xffffb47a4000. [2025-09-24 09:18:41.634] Read at address 0x00600018 (0xffffb47a4018): 0x00000000 [2025-09-24 09:18:41.634] Write at address 0x00600018 (0xffffb47a4018): 0x00400040, readback 0x00400040 [2025-09-24 09:18:41.650] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:18:41.666] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:18:41.762] Loaded PowerVR consumer services. [2025-09-24 09:18:41.874] 512+0 records in [2025-09-24 09:18:41.874] 512+0 records out [2025-09-24 09:18:41.890] Waiting data available... [2025-09-24 09:18:41.922] Starting syslogd/klogd: done [2025-09-24 09:18:41.938] DML Start [2025-09-24 09:18:42.177] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:18:42.418] DML res1: 0 [2025-09-24 09:18:42.752] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:18:42.752] Read Success [2025-09-24 09:18:42.752] Verifying certificate... [2025-09-24 09:18:42.992] Verified OK [2025-09-24 09:18:43.008] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:18:44.660] Verified OK [2025-09-24 09:18:44.660] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:18:45.305] Verified OK [2025-09-24 09:18:45.305] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:18:47.880] fs.protected_hardlinks = 1 [2025-09-24 09:18:47.880] fs.protected_symlinks = 1 [2025-09-24 09:18:47.896] kernel.modules_disabled = 1 [2025-09-24 09:18:48.088] [2025-09-24 09:18:48.088] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:18:49.447] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:18:57.135] SBL1:1210.0.1.0 [2025-09-24 09:18:57.183] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:18:58.749] SBL2:1210.0.1.0 [2025-09-24 09:18:58.797] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:18:58.893] j-A [2025-09-24 09:19:06.246] The R5 Autosar Classic is running [2025-09-24 09:19:06.269] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:19:06.269] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:19:06.877] INIT: version 2.96 booting [2025-09-24 09:19:06.990] INIT: Entering runlevel: 5 [2025-09-24 09:19:07.149] mtd24 attached [2025-09-24 09:19:07.149] mtd28 attached [2025-09-24 09:19:07.165] mtd32 attached [2025-09-24 09:19:07.196] ubi0:textures is mounted. [2025-09-24 09:19:07.212] ubi1:animations is mounted. [2025-09-24 09:19:07.212] RTNETLINK answers: File exists [2025-09-24 09:19:07.274] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:19:07.274] ubi2:dml_code is mounted. [2025-09-24 09:19:07.274] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:19:07.274] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:19:07.274] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:19:07.274] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:19:07.274] data.LB_FadeInType0=100 [2025-09-24 09:19:07.274] data.CHLH_FadeInType0=0 [2025-09-24 09:19:07.274] data.WU_FadeInDelay=0 [2025-09-24 09:19:07.274] max_time_out=0 [2025-09-24 09:19:07.274] No splash screen [2025-09-24 09:19:07.274] stop dss Done [2025-09-24 09:19:07.322] /dev/mem opened. [2025-09-24 09:19:07.322] Memory mapped at address 0xffff8cbaa000. [2025-09-24 09:19:07.348] Read at address 0x00600018 (0xffff8cbaa018): 0x00000000 [2025-09-24 09:19:07.348] Write at address 0x00600018 (0xffff8cbaa018): 0x00400040, readback 0x00400040 [2025-09-24 09:19:07.364] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:19:07.380] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:19:07.476] Loaded PowerVR consumer services. [2025-09-24 09:19:07.627] Waiting data available... [2025-09-24 09:19:07.627] 512+0 records in [2025-09-24 09:19:07.627] 512+0 records out [2025-09-24 09:19:07.643] Starting syslogd/klogd: done [2025-09-24 09:19:07.659] DML Start [2025-09-24 09:19:07.868] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:19:08.092] DML res1: 0 [2025-09-24 09:19:08.498] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:19:08.498] Read Success [2025-09-24 09:19:08.498] Verifying certificate... [2025-09-24 09:19:08.738] Verified OK [2025-09-24 09:19:08.754] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:19:10.636] Verified OK [2025-09-24 09:19:10.636] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:19:11.140] Verified OK [2025-09-24 09:19:11.140] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:19:13.506] fs.protected_hardlinks = 1 [2025-09-24 09:19:13.522] fs.protected_symlinks = 1 [2025-09-24 09:19:13.522] kernel.modules_disabled = 1 [2025-09-24 09:19:13.714] [2025-09-24 09:19:13.714] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:19:15.161] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:19:22.826] SBL1:1210.0.1.0 [2025-09-24 09:19:22.874] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:19:24.440] SBL2:1210.0.1.0 [2025-09-24 09:19:24.472] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:19:24.585] j-A [2025-09-24 09:19:31.939] The R5 Autosar Classic is running [2025-09-24 09:19:31.939] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:19:31.960] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:19:32.567] INIT: version 2.96 booting [2025-09-24 09:19:32.679] INIT: Entering runlevel: 5 [2025-09-24 09:19:32.839] mtd32 attached [2025-09-24 09:19:32.839] mtd24 attached [2025-09-24 09:19:32.855] mtd28 attached [2025-09-24 09:19:32.938] RTNETLINK answers: File exists [2025-09-24 09:19:32.938] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:19:32.938] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:19:32.938] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:19:32.938] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:19:32.938] ubi2:animations is mounted. [2025-09-24 09:19:32.938] ubi1:textures is mounted. [2025-09-24 09:19:32.938] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:19:32.938] ubi0:dml_code is mounted. [2025-09-24 09:19:32.978] data.LB_FadeInType0=100 [2025-09-24 09:19:32.978] data.CHLH_FadeInType0=0 [2025-09-24 09:19:32.978] data.WU_FadeInDelay=0 [2025-09-24 09:19:32.978] max_time_out=0 [2025-09-24 09:19:32.978] No splash screen [2025-09-24 09:19:32.978] stop dss Done [2025-09-24 09:19:32.994] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:19:33.010] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:19:33.052] /dev/mem opened. [2025-09-24 09:19:33.052] Memory mapped at address 0xffffb69dd000. [2025-09-24 09:19:33.052] Read at address 0x00600018 (0xffffb69dd018): 0x00000000 [2025-09-24 09:19:33.052] Write at address 0x00600018 (0xffffb69dd018): 0x00400040, readback 0x00400040 [2025-09-24 09:19:33.164] Loaded PowerVR consumer services. [2025-09-24 09:19:33.299] Waiting data available... [2025-09-24 09:19:33.299] 512+0 records in [2025-09-24 09:19:33.299] 512+0 records out [2025-09-24 09:19:33.331] Starting syslogd/klogd: done [2025-09-24 09:19:33.363] DML Start [2025-09-24 09:19:33.554] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:19:33.778] DML res1: 0 [2025-09-24 09:19:34.199] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:19:34.199] Read Success [2025-09-24 09:19:34.199] Verifying certificate... [2025-09-24 09:19:34.439] Verified OK [2025-09-24 09:19:34.455] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:19:36.107] Verified OK [2025-09-24 09:19:36.107] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:19:36.691] Verified OK [2025-09-24 09:19:36.691] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:19:39.456] fs.protected_hardlinks = 1 [2025-09-24 09:19:39.472] fs.protected_symlinks = 1 [2025-09-24 09:19:39.472] kernel.modules_disabled = 1 [2025-09-24 09:19:39.681] [2025-09-24 09:19:39.681] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:19:40.857] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:19:48.538] SBL1:1210.0.1.0 [2025-09-24 09:19:48.570] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:19:50.153] SBL2:1210.0.1.0 [2025-09-24 09:19:50.185] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:19:50.297] j-A [2025-09-24 09:19:57.668] The R5 Autosar Classic is running [2025-09-24 09:19:57.668] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:19:57.668] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:19:58.275] INIT: version 2.96 booting [2025-09-24 09:19:58.387] INIT: Entering runlevel: 5 [2025-09-24 09:19:58.530] mtd28 attached [2025-09-24 09:19:58.546] mtd32 attached [2025-09-24 09:19:58.562] mtd24 attached [2025-09-24 09:19:58.662] RTNETLINK answers: File exists [2025-09-24 09:19:58.662] ubi0:animations is mounted. [2025-09-24 09:19:58.662] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:19:58.662] ubi2:textures is mounted. [2025-09-24 09:19:58.662] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:19:58.662] ubi1:dml_code is mounted. [2025-09-24 09:19:58.662] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:19:58.662] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:19:58.662] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:19:58.662] data.LB_FadeInType0=100 [2025-09-24 09:19:58.662] data.CHLH_FadeInType0=0 [2025-09-24 09:19:58.662] data.WU_FadeInDelay=0 [2025-09-24 09:19:58.662] max_time_out=0 [2025-09-24 09:19:58.662] No splash screen [2025-09-24 09:19:58.662] stop dss Done [2025-09-24 09:19:58.694] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:19:58.736] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:19:58.736] /dev/mem opened. [2025-09-24 09:19:58.736] Memory mapped at address 0xffffb7772000. [2025-09-24 09:19:58.736] Read at address 0x00600018 (0xffffb7772018): 0x00000000 [2025-09-24 09:19:58.736] Write at address 0x00600018 (0xffffb7772018): 0x00400040, readback 0x00400040 [2025-09-24 09:19:58.960] Loaded PowerVR consumer services. [2025-09-24 09:19:58.992] Waiting data available... [2025-09-24 09:19:59.008] 512+0 records in [2025-09-24 09:19:59.008] 512+0 records out [2025-09-24 09:19:59.055] Starting syslogd/klogd: done [2025-09-24 09:19:59.071] DML Start [2025-09-24 09:19:59.263] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:19:59.519] DML res1: 0 [2025-09-24 09:19:59.884] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:19:59.884] Read Success [2025-09-24 09:19:59.884] Verifying certificate... [2025-09-24 09:20:00.171] Verified OK [2025-09-24 09:20:00.187] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:20:01.770] Verified OK [2025-09-24 09:20:01.770] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:20:02.353] Verified OK [2025-09-24 09:20:02.353] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:20:05.071] fs.protected_hardlinks = 1 [2025-09-24 09:20:05.087] fs.protected_symlinks = 1 [2025-09-24 09:20:05.087] kernel.modules_disabled = 1 [2025-09-24 09:20:05.278] [2025-09-24 09:20:05.278] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:20:06.585] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:20:14.257] SBL1:1210.0.1.0 [2025-09-24 09:20:14.289] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 09:20:15.872] SBL2:1210.0.1.0 [2025-09-24 09:20:15.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:20:16.016] j-A [2025-09-24 09:20:23.390] The R5 Autosar Classic is running [2025-09-24 09:20:23.390] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:20:23.390] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:20:23.998] INIT: version 2.96 booting [2025-09-24 09:20:24.109] INIT: Entering runlevel: 5 [2025-09-24 09:20:24.269] mtd28 attached [2025-09-24 09:20:24.269] mtd24 attached [2025-09-24 09:20:24.285] mtd32 attached [2025-09-24 09:20:24.301] ubi0:animations is mounted. [2025-09-24 09:20:24.333] RTNETLINK answers: File exists [2025-09-24 09:20:24.370] ubi2:dml_code is mounted. [2025-09-24 09:20:24.370] ubi1:textures is mounted. [2025-09-24 09:20:24.370] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:20:24.370] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:20:24.370] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:20:24.401] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:20:24.401] data.LB_FadeInType0=100 [2025-09-24 09:20:24.401] data.CHLH_FadeInType0=0 [2025-09-24 09:20:24.401] data.WU_FadeInDelay=0 [2025-09-24 09:20:24.401] max_time_out=0 [2025-09-24 09:20:24.401] No splash screen [2025-09-24 09:20:24.401] stop dss Done [2025-09-24 09:20:24.401] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:20:24.472] /dev/mem opened. [2025-09-24 09:20:24.472] Memory mapped at address 0xffffbbfb9000. [2025-09-24 09:20:24.472] Read at address 0x00600018 (0xffffbbfb9018): 0x00000000 [2025-09-24 09:20:24.472] Write at address 0x00600018 (0xffffbbfb9018): 0x00400040, readback 0x00400040 [2025-09-24 09:20:24.472] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:20:24.488] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:20:24.568] Loaded PowerVR consumer services. [2025-09-24 09:20:24.739] Waiting data available... [2025-09-24 09:20:24.739] 512+0 records in [2025-09-24 09:20:24.739] 512+0 records out [2025-09-24 09:20:24.771] Starting syslogd/klogd: done [2025-09-24 09:20:24.787] DML Start [2025-09-24 09:20:24.979] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:20:25.219] DML res1: 0 [2025-09-24 09:20:25.664] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:20:25.664] Read Success [2025-09-24 09:20:25.664] Verifying certificate... [2025-09-24 09:20:25.903] Verified OK [2025-09-24 09:20:25.919] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:20:27.709] Verified OK [2025-09-24 09:20:27.709] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:20:28.308] Verified OK [2025-09-24 09:20:28.308] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:20:30.802] fs.protected_hardlinks = 1 [2025-09-24 09:20:30.818] fs.protected_symlinks = 1 [2025-09-24 09:20:30.818] kernel.modules_disabled = 1 [2025-09-24 09:20:31.009] [2025-09-24 09:20:31.009] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:20:32.300] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:20:39.955] SBL1:1210.0.1.0 [2025-09-24 09:20:40.003] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:20:41.570] SBL2:1210.0.1.0 [2025-09-24 09:20:41.618] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:20:41.714] j-A [2025-09-24 09:20:49.069] The R5 Autosar Classic is running [2025-09-24 09:20:49.069] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:20:49.090] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:20:49.697] INIT: version 2.96 booting [2025-09-24 09:20:49.809] INIT: Entering runlevel: 5 [2025-09-24 09:20:49.968] mtd32 attached [2025-09-24 09:20:49.968] mtd28 attached [2025-09-24 09:20:49.984] mtd24 attached [2025-09-24 09:20:50.033] ubi0:dml_code is mounted. [2025-09-24 09:20:50.033] RTNETLINK answers: File exists [2025-09-24 09:20:50.067] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:20:50.067] ubi1:animations is mounted. [2025-09-24 09:20:50.067] ubi2:textures is mounted. [2025-09-24 09:20:50.067] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:20:50.067] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:20:50.067] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:20:50.099] data.LB_FadeInType0=100 [2025-09-24 09:20:50.099] data.CHLH_FadeInType0=0 [2025-09-24 09:20:50.099] data.WU_FadeInDelay=0 [2025-09-24 09:20:50.099] max_time_out=0 [2025-09-24 09:20:50.099] No splash screen [2025-09-24 09:20:50.099] stop dss Done [2025-09-24 09:20:50.099] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:20:50.131] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:20:50.166] /dev/mem opened. [2025-09-24 09:20:50.166] Memory mapped at address 0xffffab546000. [2025-09-24 09:20:50.166] Read at address 0x00600018 (0xffffab546018): 0x00000000 [2025-09-24 09:20:50.166] Write at address 0x00600018 (0xffffab546018): 0x00400040, readback 0x00400040 [2025-09-24 09:20:50.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:20:50.277] Loaded PowerVR consumer services. [2025-09-24 09:20:50.405] Waiting data available... [2025-09-24 09:20:50.421] 512+0 records in [2025-09-24 09:20:50.421] 512+0 records out [2025-09-24 09:20:50.453] Starting syslogd/klogd: done [2025-09-24 09:20:50.485] DML Start [2025-09-24 09:20:50.646] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:20:50.869] DML res1: 0 [2025-09-24 09:20:51.365] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:20:51.386] Read Success [2025-09-24 09:20:51.386] Verifying certificate... [2025-09-24 09:20:51.625] Verified OK [2025-09-24 09:20:51.641] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:20:53.315] Verified OK [2025-09-24 09:20:53.315] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:20:53.914] Verified OK [2025-09-24 09:20:53.914] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:20:56.503] fs.protected_hardlinks = 1 [2025-09-24 09:20:56.503] fs.protected_symlinks = 1 [2025-09-24 09:20:56.518] kernel.modules_disabled = 1 [2025-09-24 09:20:56.711] [2025-09-24 09:20:56.711] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:20:57.987] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:21:05.657] SBL1:1210.0.1.0 [2025-09-24 09:21:05.705] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:21:07.272] SBL2:1210.0.1.0 [2025-09-24 09:21:07.303] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:21:07.416] j-A [2025-09-24 09:21:14.791] The R5 Autosar Classic is running [2025-09-24 09:21:14.791] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:21:14.791] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:21:15.399] INIT: version 2.96 booting [2025-09-24 09:21:15.510] INIT: Entering runlevel: 5 [2025-09-24 09:21:15.670] mtd32 attached [2025-09-24 09:21:15.670] mtd28 attached [2025-09-24 09:21:15.670] mtd24 attached [2025-09-24 09:21:15.734] RTNETLINK answers: File exists [2025-09-24 09:21:15.778] ubi0:dml_code is mounted. [2025-09-24 09:21:15.778] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:21:15.778] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:21:15.778] ubi2:textures is mounted. [2025-09-24 09:21:15.778] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:21:15.778] ubi1:animations is mounted. [2025-09-24 09:21:15.778] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:21:15.778] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:21:15.795] data.LB_FadeInType0=100 [2025-09-24 09:21:15.795] data.CHLH_FadeInType0=0 [2025-09-24 09:21:15.795] data.WU_FadeInDelay=0 [2025-09-24 09:21:15.811] max_time_out=0 [2025-09-24 09:21:15.811] No splash screen [2025-09-24 09:21:15.811] stop dss Done [2025-09-24 09:21:15.856] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:21:15.856] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:21:15.890] /dev/mem opened. [2025-09-24 09:21:15.890] Memory mapped at address 0xffffbe357000. [2025-09-24 09:21:15.890] Read at address 0x00600018 (0xffffbe357018): 0x00000000 [2025-09-24 09:21:15.890] Write at address 0x00600018 (0xffffbe357018): 0x00400040, readback 0x00400040 [2025-09-24 09:21:15.986] Loaded PowerVR consumer services. [2025-09-24 09:21:16.113] Waiting data available... [2025-09-24 09:21:16.129] 512+0 records in [2025-09-24 09:21:16.129] 512+0 records out [2025-09-24 09:21:16.161] Starting syslogd/klogd: done [2025-09-24 09:21:16.177] DML Start [2025-09-24 09:21:16.353] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:21:16.609] DML res1: 0 [2025-09-24 09:21:17.038] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:21:17.038] Read Success [2025-09-24 09:21:17.038] Verifying certificate... [2025-09-24 09:21:17.310] Verified OK [2025-09-24 09:21:17.326] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:21:19.019] Verified OK [2025-09-24 09:21:19.019] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:21:19.615] Verified OK [2025-09-24 09:21:19.615] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:21:22.190] fs.protected_hardlinks = 1 [2025-09-24 09:21:22.204] fs.protected_symlinks = 1 [2025-09-24 09:21:22.204] kernel.modules_disabled = 1 [2025-09-24 09:21:22.396] [2025-09-24 09:21:22.397] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:21:23.674] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:21:31.365] SBL1:1210.0.1.0 [2025-09-24 09:21:31.413] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:21:32.979] SBL2:1210.0.1.0 [2025-09-24 09:21:33.011] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:21:33.124] j-A [2025-09-24 09:21:40.479] The R5 Autosar Classic is running [2025-09-24 09:21:40.479] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:21:40.500] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:21:41.106] INIT: version 2.96 booting [2025-09-24 09:21:41.219] INIT: Entering runlevel: 5 [2025-09-24 09:21:41.362] mtd28 attached [2025-09-24 09:21:41.378] mtd32 attached [2025-09-24 09:21:41.378] mtd24 attached [2025-09-24 09:21:41.426] RTNETLINK answers: File exists [2025-09-24 09:21:41.474] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:21:41.474] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:21:41.474] ubi0:animations is mounted. [2025-09-24 09:21:41.474] ubi2:textures is mounted. [2025-09-24 09:21:41.474] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:21:41.474] ubi1:dml_code is mounted. [2025-09-24 09:21:41.474] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:21:41.474] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:21:41.499] data.LB_FadeInType0=100 [2025-09-24 09:21:41.499] data.CHLH_FadeInType0=0 [2025-09-24 09:21:41.499] data.WU_FadeInDelay=0 [2025-09-24 09:21:41.499] max_time_out=0 [2025-09-24 09:21:41.499] No splash screen [2025-09-24 09:21:41.499] stop dss Done [2025-09-24 09:21:41.515] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:21:41.530] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:21:41.586] /dev/mem opened. [2025-09-24 09:21:41.586] Memory mapped at address 0xffffbd6e3000. [2025-09-24 09:21:41.586] Read at address 0x00600018 (0xffffbd6e3018): 0x00000000 [2025-09-24 09:21:41.586] Write at address 0x00600018 (0xffffbd6e3018): 0x00400040, readback 0x00400040 [2025-09-24 09:21:41.762] Loaded PowerVR consumer services. [2025-09-24 09:21:41.842] 512+0 records in [2025-09-24 09:21:41.842] 512+0 records out [2025-09-24 09:21:41.842] Waiting data available... [2025-09-24 09:21:41.890] Starting syslogd/klogd: done [2025-09-24 09:21:41.906] DML Start [2025-09-24 09:21:42.066] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:21:42.306] DML res1: 0 [2025-09-24 09:21:42.780] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:21:42.780] Read Success [2025-09-24 09:21:42.780] Verifying certificate... [2025-09-24 09:21:43.003] Verified OK [2025-09-24 09:21:43.020] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:21:44.698] Verified OK [2025-09-24 09:21:44.698] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:21:45.248] Verified OK [2025-09-24 09:21:45.248] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:21:47.934] fs.protected_hardlinks = 1 [2025-09-24 09:21:47.934] fs.protected_symlinks = 1 [2025-09-24 09:21:47.950] kernel.modules_disabled = 1 [2025-09-24 09:21:48.141] [2025-09-24 09:21:48.141] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:21:49.423] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:21:57.077] SBL1:1210.0.1.0 [2025-09-24 09:21:57.109] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:21:58.692] SBL2:1210.0.1.0 [2025-09-24 09:21:58.724] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:21:58.836] j-A [2025-09-24 09:22:06.206] The R5 Autosar Classic is running [2025-09-24 09:22:06.206] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:22:06.206] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:22:06.813] INIT: version 2.96 booting [2025-09-24 09:22:06.925] INIT: Entering runlevel: 5 [2025-09-24 09:22:07.069] mtd24 attached [2025-09-24 09:22:07.085] mtd28 attached [2025-09-24 09:22:07.101] mtd32 attached [2025-09-24 09:22:07.117] ubi0:textures is mounted. [2025-09-24 09:22:07.149] RTNETLINK answers: File exists [2025-09-24 09:22:07.149] ubi1:animations is mounted. [2025-09-24 09:22:07.203] ubi2:dml_code is mounted. [2025-09-24 09:22:07.203] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:22:07.203] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:22:07.203] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:22:07.203] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:22:07.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:22:07.203] data.LB_FadeInType0=100 [2025-09-24 09:22:07.203] data.CHLH_FadeInType0=0 [2025-09-24 09:22:07.203] data.WU_FadeInDelay=0 [2025-09-24 09:22:07.203] max_time_out=0 [2025-09-24 09:22:07.203] No splash screen [2025-09-24 09:22:07.203] stop dss Done [2025-09-24 09:22:07.276] /dev/mem opened. [2025-09-24 09:22:07.276] Memory mapped at address 0xffff9c6fe000. [2025-09-24 09:22:07.276] Read at address 0x00600018 (0xffff9c6fe018): 0x00000000 [2025-09-24 09:22:07.276] Write at address 0x00600018 (0xffff9c6fe018): 0x00400040, readback 0x00400040 [2025-09-24 09:22:07.291] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:22:07.291] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:22:07.420] Loaded PowerVR consumer services. [2025-09-24 09:22:07.557] Waiting data available... [2025-09-24 09:22:07.557] 512+0 records in [2025-09-24 09:22:07.557] 512+0 records out [2025-09-24 09:22:07.573] Starting syslogd/klogd: done [2025-09-24 09:22:07.589] DML Start [2025-09-24 09:22:07.766] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:22:08.022] DML res1: 0 [2025-09-24 09:22:08.421] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:22:08.442] Read Success [2025-09-24 09:22:08.442] Verifying certificate... [2025-09-24 09:22:08.666] Verified OK [2025-09-24 09:22:08.681] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:22:10.422] Verified OK [2025-09-24 09:22:10.422] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:22:11.042] Verified OK [2025-09-24 09:22:11.042] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:22:13.631] fs.protected_hardlinks = 1 [2025-09-24 09:22:13.647] fs.protected_symlinks = 1 [2025-09-24 09:22:13.647] kernel.modules_disabled = 1 [2025-09-24 09:22:13.855] [2025-09-24 09:22:13.855] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:22:15.102] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:22:22.770] SBL1:1210.0.1.0 [2025-09-24 09:22:22.818] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:22:24.385] SBL2:1210.0.1.0 [2025-09-24 09:22:24.416] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:22:24.528] j-A [2025-09-24 09:22:31.883] The R5 Autosar Classic is running [2025-09-24 09:22:31.883] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:22:31.903] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:22:32.511] INIT: version 2.96 booting [2025-09-24 09:22:32.623] INIT: Entering runlevel: 5 [2025-09-24 09:22:32.782] mtd32 attached [2025-09-24 09:22:32.782] mtd28 attached [2025-09-24 09:22:32.798] mtd24 attached [2025-09-24 09:22:32.847] RTNETLINK answers: File exists [2025-09-24 09:22:32.895] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:22:32.895] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:22:32.895] ubi0:dml_code is mounted. [2025-09-24 09:22:32.895] ubi1:animations is mounted. [2025-09-24 09:22:32.895] ubi2:textures is mounted. [2025-09-24 09:22:32.895] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:22:32.895] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:22:32.895] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:22:32.895] data.LB_FadeInType0=100 [2025-09-24 09:22:32.916] data.CHLH_FadeInType0=0 [2025-09-24 09:22:32.916] data.WU_FadeInDelay=0 [2025-09-24 09:22:32.916] max_time_out=0 [2025-09-24 09:22:32.916] No splash screen [2025-09-24 09:22:32.916] stop dss Done [2025-09-24 09:22:32.947] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:22:32.979] /dev/mem opened. [2025-09-24 09:22:32.979] Memory mapped at address 0xffffb54c9000. [2025-09-24 09:22:32.979] Read at address 0x00600018 (0xffffb54c9018): 0x00000000 [2025-09-24 09:22:32.979] Write at address 0x00600018 (0xffffb54c9018): 0x00400040, readback 0x00400040 [2025-09-24 09:22:32.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:22:33.203] Loaded PowerVR consumer services. [2025-09-24 09:22:33.236] 512+0 records in [2025-09-24 09:22:33.236] 512+0 records out [2025-09-24 09:22:33.268] Waiting data available... [2025-09-24 09:22:33.283] Starting syslogd/klogd: done [2025-09-24 09:22:33.299] DML Start [2025-09-24 09:22:33.475] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:22:33.699] DML res1: 0 [2025-09-24 09:22:34.162] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:22:34.178] Read Success [2025-09-24 09:22:34.178] Verifying certificate... [2025-09-24 09:22:34.483] Verified OK [2025-09-24 09:22:34.499] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:22:36.238] Verified OK [2025-09-24 09:22:36.238] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:22:36.824] Verified OK [2025-09-24 09:22:36.824] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:22:39.350] fs.protected_hardlinks = 1 [2025-09-24 09:22:39.366] fs.protected_symlinks = 1 [2025-09-24 09:22:39.366] kernel.modules_disabled = 1 [2025-09-24 09:22:39.574] [2025-09-24 09:22:39.574] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:22:40.804] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:22:48.484] SBL1:1210.0.1.0 [2025-09-24 09:22:48.516] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:22:50.098] SBL2:1210.0.1.0 [2025-09-24 09:22:50.130] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:22:50.241] j-A [2025-09-24 09:22:57.616] The R5 Autosar Classic is running [2025-09-24 09:22:57.616] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:22:57.616] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:22:58.223] INIT: version 2.96 booting [2025-09-24 09:22:58.334] INIT: Entering runlevel: 5 [2025-09-24 09:22:58.494] mtd28 attached [2025-09-24 09:22:58.494] mtd24 attached [2025-09-24 09:22:58.510] mtd32 attached [2025-09-24 09:22:58.558] ubi0:animations is mounted. [2025-09-24 09:22:58.558] RTNETLINK answers: File exists [2025-09-24 09:22:58.619] ubi1:textures is mounted. [2025-09-24 09:22:58.619] ubi2:dml_code is mounted. [2025-09-24 09:22:58.619] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:22:58.619] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:22:58.619] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:22:58.619] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:22:58.619] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:22:58.619] data.LB_FadeInType0=100 [2025-09-24 09:22:58.619] data.CHLH_FadeInType0=0 [2025-09-24 09:22:58.619] data.WU_FadeInDelay=0 [2025-09-24 09:22:58.619] max_time_out=0 [2025-09-24 09:22:58.619] No splash screen [2025-09-24 09:22:58.619] stop dss Done [2025-09-24 09:22:58.719] /dev/mem opened. [2025-09-24 09:22:58.719] Memory mapped at address 0xffff80ba8000. [2025-09-24 09:22:58.719] Read at address 0x00600018 (0xffff80ba8018): 0x00000000 [2025-09-24 09:22:58.719] Write at address 0x00600018 (0xffff80ba8018): 0x00400040, readback 0x00400040 [2025-09-24 09:22:58.719] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:22:58.719] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:22:58.815] Loaded PowerVR consumer services. [2025-09-24 09:22:58.943] 512+0 records in [2025-09-24 09:22:58.943] 512+0 records out [2025-09-24 09:22:58.959] Waiting data available... [2025-09-24 09:22:58.975] Starting syslogd/klogd: done [2025-09-24 09:22:58.991] DML Start [2025-09-24 09:22:59.167] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:22:59.454] DML res1: 0 [2025-09-24 09:22:59.775] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:22:59.795] Read Success [2025-09-24 09:22:59.795] Verifying certificate... [2025-09-24 09:23:00.067] Verified OK [2025-09-24 09:23:00.083] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:23:01.666] Verified OK [2025-09-24 09:23:01.666] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:23:02.304] Verified OK [2025-09-24 09:23:02.304] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:23:05.023] fs.protected_hardlinks = 1 [2025-09-24 09:23:05.038] fs.protected_symlinks = 1 [2025-09-24 09:23:05.038] kernel.modules_disabled = 1 [2025-09-24 09:23:05.215] [2025-09-24 09:23:05.215] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:23:06.518] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:23:14.160] SBL1:1210.0.1.0 [2025-09-24 09:23:14.208] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:23:15.775] SBL2:1210.0.1.0 [2025-09-24 09:23:15.807] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:23:15.919] j-A [2025-09-24 09:23:23.272] The R5 Autosar Classic is running [2025-09-24 09:23:23.272] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:23:23.293] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:23:23.901] INIT: version 2.96 booting [2025-09-24 09:23:24.013] INIT: Entering runlevel: 5 [2025-09-24 09:23:24.173] mtd24 attached [2025-09-24 09:23:24.173] mtd28 attached [2025-09-24 09:23:24.188] mtd32 attached [2025-09-24 09:23:24.220] ubi0:textures is mounted. [2025-09-24 09:23:24.299] RTNETLINK answers: File exists [2025-09-24 09:23:24.299] ubi1:animations is mounted. [2025-09-24 09:23:24.299] ubi2:dml_code is mounted. [2025-09-24 09:23:24.299] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:23:24.299] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:23:24.299] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:23:24.299] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:23:24.299] data.LB_FadeInType0=100 [2025-09-24 09:23:24.299] data.CHLH_FadeInType0=0 [2025-09-24 09:23:24.299] data.WU_FadeInDelay=0 [2025-09-24 09:23:24.299] max_time_out=0 [2025-09-24 09:23:24.299] No splash screen [2025-09-24 09:23:24.299] stop dss Done [2025-09-24 09:23:24.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:23:24.332] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:23:24.371] /dev/mem opened. [2025-09-24 09:23:24.371] Memory mapped at address 0xffffb251a000. [2025-09-24 09:23:24.371] Read at address 0x00600018 (0xffffb251a018): 0x00000000 [2025-09-24 09:23:24.371] Write at address 0x00600018 (0xffffb251a018): 0x00400040, readback 0x00400040 [2025-09-24 09:23:24.371] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:23:24.466] Loaded PowerVR consumer services. [2025-09-24 09:23:24.610] Waiting data available... [2025-09-24 09:23:24.642] 512+0 records in [2025-09-24 09:23:24.642] 512+0 records out [2025-09-24 09:23:24.658] Starting syslogd/klogd: done [2025-09-24 09:23:24.690] DML Start [2025-09-24 09:23:24.882] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:23:25.122] DML res1: 0 [2025-09-24 09:23:25.551] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:23:25.551] Read Success [2025-09-24 09:23:25.551] Verifying certificate... [2025-09-24 09:23:25.806] Verified OK [2025-09-24 09:23:25.822] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:23:27.534] Verified OK [2025-09-24 09:23:27.534] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:23:28.188] Verified OK [2025-09-24 09:23:28.205] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:23:30.827] fs.protected_hardlinks = 1 [2025-09-24 09:23:30.843] fs.protected_symlinks = 1 [2025-09-24 09:23:30.859] kernel.modules_disabled = 1 [2025-09-24 09:23:31.066] [2025-09-24 09:23:31.066] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:23:32.209] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:23:39.884] SBL1:1210.0.1.0 [2025-09-24 09:23:39.915] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:23:41.498] SBL2:1210.0.1.0 [2025-09-24 09:23:41.530] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:23:41.642] j-A [2025-09-24 09:23:49.014] The R5 Autosar Classic is running [2025-09-24 09:23:49.014] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:23:49.014] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:23:49.622] INIT: version 2.96 booting [2025-09-24 09:23:49.733] INIT: Entering runlevel: 5 [2025-09-24 09:23:49.878] mtd24 attached [2025-09-24 09:23:49.894] mtd28 attached [2025-09-24 09:23:49.909] mtd32 attached [2025-09-24 09:23:50.012] ubi0:textures is mounted. [2025-09-24 09:23:50.012] ubi1:animations is mounted. [2025-09-24 09:23:50.012] RTNETLINK answers: File exists [2025-09-24 09:23:50.012] ubi2:dml_code is mounted. [2025-09-24 09:23:50.012] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:23:50.012] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:23:50.012] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:23:50.012] data.LB_FadeInType0=100 [2025-09-24 09:23:50.012] data.CHLH_FadeInType0=0 [2025-09-24 09:23:50.012] data.WU_FadeInDelay=0 [2025-09-24 09:23:50.012] max_time_out=0 [2025-09-24 09:23:50.012] No splash screen [2025-09-24 09:23:50.012] stop dss Done [2025-09-24 09:23:50.012] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:23:50.012] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:23:50.087] /dev/mem opened. [2025-09-24 09:23:50.087] Memory mapped at address 0xffff886d6000. [2025-09-24 09:23:50.087] Read at address 0x00600018 (0xffff886d6018): 0x00000000 [2025-09-24 09:23:50.087] Write at address 0x00600018 (0xffff886d6018): 0x00400040, readback 0x00400040 [2025-09-24 09:23:50.087] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:23:50.087] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:23:50.199] Loaded PowerVR consumer services. [2025-09-24 09:23:50.354] Waiting data available... [2025-09-24 09:23:50.354] 512+0 records in [2025-09-24 09:23:50.354] 512+0 records out [2025-09-24 09:23:50.385] Starting syslogd/klogd: done [2025-09-24 09:23:50.401] DML Start [2025-09-24 09:23:50.610] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:23:50.833] DML res1: 0 [2025-09-24 09:23:51.212] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:23:51.212] Read Success [2025-09-24 09:23:51.212] Verifying certificate... [2025-09-24 09:23:51.468] Verified OK [2025-09-24 09:23:51.484] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:23:53.109] Verified OK [2025-09-24 09:23:53.109] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:23:53.722] Verified OK [2025-09-24 09:23:53.722] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:23:56.503] fs.protected_hardlinks = 1 [2025-09-24 09:23:56.519] fs.protected_symlinks = 1 [2025-09-24 09:23:56.519] kernel.modules_disabled = 1 [2025-09-24 09:23:56.727] [2025-09-24 09:23:56.727] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:23:57.918] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:24:05.595] SBL1:1210.0.1.0 [2025-09-24 09:24:05.626] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:24:07.209] SBL2:1210.0.1.0 [2025-09-24 09:24:07.241] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:24:07.353] j-A [2025-09-24 09:24:14.724] The R5 Autosar Classic is running [2025-09-24 09:24:14.724] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:24:14.724] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:24:15.332] INIT: version 2.96 booting [2025-09-24 09:24:15.443] INIT: Entering runlevel: 5 [2025-09-24 09:24:15.587] mtd24 attached [2025-09-24 09:24:15.603] mtd28 attached [2025-09-24 09:24:15.620] mtd32 attached [2025-09-24 09:24:15.636] ubi0:textures is mounted. [2025-09-24 09:24:15.668] RTNETLINK answers: File exists [2025-09-24 09:24:15.727] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:24:15.727] ubi2:dml_code is mounted. [2025-09-24 09:24:15.727] ubi1:animations is mounted. [2025-09-24 09:24:15.727] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:24:15.727] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:24:15.727] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:24:15.727] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:24:15.727] data.LB_FadeInType0=100 [2025-09-24 09:24:15.727] data.CHLH_FadeInType0=0 [2025-09-24 09:24:15.727] data.WU_FadeInDelay=0 [2025-09-24 09:24:15.727] max_time_out=0 [2025-09-24 09:24:15.727] No splash screen [2025-09-24 09:24:15.727] stop dss Done [2025-09-24 09:24:15.812] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:24:15.812] /dev/mem opened. [2025-09-24 09:24:15.812] Memory mapped at address 0xffffab72b000. [2025-09-24 09:24:15.812] Read at address 0x00600018 (0xffffab72b018): 0x00000000 [2025-09-24 09:24:15.812] Write at address 0x00600018 (0xffffab72b018): 0x00400040, readback 0x00400040 [2025-09-24 09:24:15.812] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:24:16.037] Loaded PowerVR consumer services. [2025-09-24 09:24:16.068] Waiting data available... [2025-09-24 09:24:16.084] 512+0 records in [2025-09-24 09:24:16.084] 512+0 records out [2025-09-24 09:24:16.116] Starting syslogd/klogd: done [2025-09-24 09:24:16.148] DML Start [2025-09-24 09:24:16.308] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:24:16.532] DML res1: 0 [2025-09-24 09:24:17.019] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:24:17.019] Read Success [2025-09-24 09:24:17.019] Verifying certificate... [2025-09-24 09:24:17.291] Verified OK [2025-09-24 09:24:17.308] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:24:18.914] Verified OK [2025-09-24 09:24:18.914] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:24:19.542] Verified OK [2025-09-24 09:24:19.542] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:24:22.117] fs.protected_hardlinks = 1 [2025-09-24 09:24:22.117] fs.protected_symlinks = 1 [2025-09-24 09:24:22.133] kernel.modules_disabled = 1 [2025-09-24 09:24:22.324] [2025-09-24 09:24:22.324] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:24:23.575] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:24:31.304] SBL1:1210.0.1.0 [2025-09-24 09:24:31.352] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:24:32.919] SBL2:1210.0.1.0 [2025-09-24 09:24:32.951] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:24:33.063] j-A [2025-09-24 09:24:40.416] The R5 Autosar Classic is running [2025-09-24 09:24:40.438] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:24:40.438] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:24:41.045] INIT: version 2.96 booting [2025-09-24 09:24:41.157] INIT: Entering runlevel: 5 [2025-09-24 09:24:41.317] mtd32 attached [2025-09-24 09:24:41.317] mtd28 attached [2025-09-24 09:24:41.317] mtd24 attached [2025-09-24 09:24:41.436] RTNETLINK answers: File exists [2025-09-24 09:24:41.436] ubi0:dml_code is mounted. [2025-09-24 09:24:41.436] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:24:41.436] ubi2:textures is mounted. [2025-09-24 09:24:41.436] ubi1:animations is mounted. [2025-09-24 09:24:41.436] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:24:41.436] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:24:41.436] data.LB_FadeInType0=100 [2025-09-24 09:24:41.436] data.CHLH_FadeInType0=0 [2025-09-24 09:24:41.436] data.WU_FadeInDelay=0 [2025-09-24 09:24:41.436] max_time_out=0 [2025-09-24 09:24:41.436] No splash screen [2025-09-24 09:24:41.436] stop dss Done [2025-09-24 09:24:41.436] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:24:41.436] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:24:41.509] /dev/mem opened. [2025-09-24 09:24:41.509] Memory mapped at address 0xffff8e89e000. [2025-09-24 09:24:41.509] Read at address 0x00600018 (0xffff8e89e018): 0x00000000 [2025-09-24 09:24:41.509] Write at address 0x00600018 (0xffff8e89e018): 0x00400040, readback 0x00400040 [2025-09-24 09:24:41.551] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:24:41.551] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:24:41.630] Loaded PowerVR consumer services. [2025-09-24 09:24:41.770] Waiting data available... [2025-09-24 09:24:41.770] 512+0 records in [2025-09-24 09:24:41.770] 512+0 records out [2025-09-24 09:24:41.786] Starting syslogd/klogd: done [2025-09-24 09:24:41.818] DML Start [2025-09-24 09:24:41.978] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:24:42.234] DML res1: 0 [2025-09-24 09:24:42.634] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:24:42.660] Read Success [2025-09-24 09:24:42.660] Verifying certificate... [2025-09-24 09:24:42.931] Verified OK [2025-09-24 09:24:42.948] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:24:44.642] Verified OK [2025-09-24 09:24:44.642] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:24:45.275] Verified OK [2025-09-24 09:24:45.275] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:24:47.913] fs.protected_hardlinks = 1 [2025-09-24 09:24:47.913] fs.protected_symlinks = 1 [2025-09-24 09:24:47.929] kernel.modules_disabled = 1 [2025-09-24 09:24:48.105] [2025-09-24 09:24:48.105] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:24:49.303] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:24:57.006] SBL1:1210.0.1.0 [2025-09-24 09:24:57.038] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:24:58.621] SBL2:1210.0.1.0 [2025-09-24 09:24:58.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:24:58.765] j-A [2025-09-24 09:25:06.138] The R5 Autosar Classic is running [2025-09-24 09:25:06.138] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:25:06.138] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:25:06.745] INIT: version 2.96 booting [2025-09-24 09:25:06.856] INIT: Entering runlevel: 5 [2025-09-24 09:25:07.016] mtd28 attached [2025-09-24 09:25:07.016] mtd24 attached [2025-09-24 09:25:07.032] mtd32 attached [2025-09-24 09:25:07.064] ubi0:animations is mounted. [2025-09-24 09:25:07.080] RTNETLINK answers: File exists [2025-09-24 09:25:07.143] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:25:07.143] ubi1:textures is mounted. [2025-09-24 09:25:07.143] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:25:07.143] ubi2:dml_code is mounted. [2025-09-24 09:25:07.143] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:25:07.143] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:25:07.143] data.LB_FadeInType0=100 [2025-09-24 09:25:07.143] data.CHLH_FadeInType0=0 [2025-09-24 09:25:07.143] data.WU_FadeInDelay=0 [2025-09-24 09:25:07.143] max_time_out=0 [2025-09-24 09:25:07.143] No splash screen [2025-09-24 09:25:07.143] stop dss Done [2025-09-24 09:25:07.143] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:25:07.175] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:25:07.175] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:25:07.191] /dev/mem opened. [2025-09-24 09:25:07.191] Memory mapped at address 0xffff946ac000. [2025-09-24 09:25:07.216] Read at address 0x00600018 (0xffff946ac018): 0x00000000 [2025-09-24 09:25:07.216] Write at address 0x00600018 (0xffff946ac018): 0x00400040, readback 0x00400040 [2025-09-24 09:25:07.328] Loaded PowerVR consumer services. [2025-09-24 09:25:07.472] Waiting data available... [2025-09-24 09:25:07.488] 512+0 records in [2025-09-24 09:25:07.488] 512+0 records out [2025-09-24 09:25:07.504] Starting syslogd/klogd: done [2025-09-24 09:25:07.536] DML Start [2025-09-24 09:25:07.712] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:25:07.888] DML res1: 0 [2025-09-24 09:25:08.374] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:25:08.374] Read Success [2025-09-24 09:25:08.374] Verifying certificate... [2025-09-24 09:25:08.614] Verified OK [2025-09-24 09:25:08.630] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:25:10.282] Verified OK [2025-09-24 09:25:10.282] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:25:10.858] Verified OK [2025-09-24 09:25:10.858] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:25:13.400] fs.protected_hardlinks = 1 [2025-09-24 09:25:13.416] fs.protected_symlinks = 1 [2025-09-24 09:25:13.432] kernel.modules_disabled = 1 [2025-09-24 09:25:13.624] [2025-09-24 09:25:13.624] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:25:14.965] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:25:22.698] SBL1:1210.0.1.0 [2025-09-24 09:25:22.746] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:25:24.314] SBL2:1210.0.1.0 [2025-09-24 09:25:24.362] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:25:24.457] j-A [2025-09-24 09:25:31.811] The R5 Autosar Classic is running [2025-09-24 09:25:31.832] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:25:31.832] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:25:32.441] INIT: version 2.96 booting [2025-09-24 09:25:32.552] INIT: Entering runlevel: 5 [2025-09-24 09:25:32.712] mtd32 attached [2025-09-24 09:25:32.712] mtd28 attached [2025-09-24 09:25:32.728] mtd24 attached [2025-09-24 09:25:32.776] RTNETLINK answers: File exists [2025-09-24 09:25:32.819] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:25:32.819] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:25:32.819] ubi2:textures is mounted. [2025-09-24 09:25:32.819] ubi0:dml_code is mounted. [2025-09-24 09:25:32.819] ubi1:animations is mounted. [2025-09-24 09:25:32.819] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:25:32.819] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:25:32.819] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:25:32.819] data.LB_FadeInType0=100 [2025-09-24 09:25:32.840] data.CHLH_FadeInType0=0 [2025-09-24 09:25:32.840] data.WU_FadeInDelay=0 [2025-09-24 09:25:32.840] max_time_out=0 [2025-09-24 09:25:32.840] No splash screen [2025-09-24 09:25:32.840] stop dss Done [2025-09-24 09:25:32.919] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:25:32.919] /dev/mem opened. [2025-09-24 09:25:32.919] Memory mapped at address 0xffff9d5e5000. [2025-09-24 09:25:32.919] Read at address 0x00600018 (0xffff9d5e5018): 0x00000000 [2025-09-24 09:25:32.919] Write at address 0x00600018 (0xffff9d5e5018): 0x00400040, readback 0x00400040 [2025-09-24 09:25:32.919] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:25:33.127] Loaded PowerVR consumer services. [2025-09-24 09:25:33.159] 512+0 records in [2025-09-24 09:25:33.159] 512+0 records out [2025-09-24 09:25:33.190] Starting syslogd/klogd: Waiting data available... [2025-09-24 09:25:33.206] done [2025-09-24 09:25:33.206] DML Start [2025-09-24 09:25:33.399] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:25:33.623] DML res1: 0 [2025-09-24 09:25:34.043] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:25:34.043] Read Success [2025-09-24 09:25:34.043] Verifying certificate... [2025-09-24 09:25:34.282] Verified OK [2025-09-24 09:25:34.314] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:25:36.089] Verified OK [2025-09-24 09:25:36.089] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:25:36.568] Verified OK [2025-09-24 09:25:36.568] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:25:38.994] fs.protected_hardlinks = 1 [2025-09-24 09:25:38.994] fs.protected_symlinks = 1 [2025-09-24 09:25:38.994] kernel.modules_disabled = 1 [2025-09-24 09:25:39.169] [2025-09-24 09:25:39.169] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:25:40.688] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:25:48.410] SBL1:1210.0.1.0 [2025-09-24 09:25:48.442] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:25:50.025] SBL2:1210.0.1.0 [2025-09-24 09:25:50.056] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:25:50.169] j-A [2025-09-24 09:25:57.543] The R5 Autosar Classic is running [2025-09-24 09:25:57.543] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:25:57.543] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:25:58.150] INIT: version 2.96 booting [2025-09-24 09:25:58.262] INIT: Entering runlevel: 5 [2025-09-24 09:25:58.422] mtd28 attached [2025-09-24 09:25:58.422] mtd32 attached [2025-09-24 09:25:58.438] mtd24 attached [2025-09-24 09:25:58.486] RTNETLINK answers: File exists [2025-09-24 09:25:58.534] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:25:58.534] ubi2:textures is mounted. [2025-09-24 09:25:58.534] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:25:58.534] ubi0:animations is mounted. [2025-09-24 09:25:58.534] ubi1:dml_code is mounted. [2025-09-24 09:25:58.534] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:25:58.534] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:25:58.534] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:25:58.556] data.LB_FadeInType0=100 [2025-09-24 09:25:58.556] data.CHLH_FadeInType0=0 [2025-09-24 09:25:58.556] data.WU_FadeInDelay=0 [2025-09-24 09:25:58.556] max_time_out=0 [2025-09-24 09:25:58.556] No splash screen [2025-09-24 09:25:58.556] stop dss Done [2025-09-24 09:25:58.588] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:25:58.626] /dev/mem opened. [2025-09-24 09:25:58.626] Memory mapped at address 0xffff887e4000. [2025-09-24 09:25:58.626] Read at address 0x00600018 (0xffff887e4018): 0x00000000 [2025-09-24 09:25:58.626] Write at address 0x00600018 (0xffff887e4018): 0x00400040, readback 0x00400040 [2025-09-24 09:25:58.626] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:25:58.738] Loaded PowerVR consumer services. [2025-09-24 09:25:58.890] 512+0 records in [2025-09-24 09:25:58.890] 512+0 records out [2025-09-24 09:25:58.890] Waiting data available... [2025-09-24 09:25:58.906] Starting syslogd/klogd: done [2025-09-24 09:25:58.922] DML Start [2025-09-24 09:25:59.082] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:25:59.306] DML res1: 0 [2025-09-24 09:25:59.800] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:25:59.800] Read Success [2025-09-24 09:25:59.800] Verifying certificate... [2025-09-24 09:26:00.039] Verified OK [2025-09-24 09:26:00.055] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:26:01.830] Verified OK [2025-09-24 09:26:01.830] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:26:02.444] Verified OK [2025-09-24 09:26:02.444] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:26:04.954] fs.protected_hardlinks = 1 [2025-09-24 09:26:04.954] fs.protected_symlinks = 1 [2025-09-24 09:26:04.969] kernel.modules_disabled = 1 [2025-09-24 09:26:05.162] [2025-09-24 09:26:05.162] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:26:06.417] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:26:14.102] SBL1:1210.0.1.0 [2025-09-24 09:26:14.150] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:26:15.716] SBL2:1210.0.1.0 [2025-09-24 09:26:15.764] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:26:15.861] j-A [2025-09-24 09:26:23.215] The R5 Autosar Classic is running [2025-09-24 09:26:23.215] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:26:23.236] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:26:23.844] INIT: version 2.96 booting [2025-09-24 09:26:23.955] INIT: Entering runlevel: 5 [2025-09-24 09:26:24.115] mtd24 attached [2025-09-24 09:26:24.131] mtd32 attached [2025-09-24 09:26:24.131] mtd28 attached [2025-09-24 09:26:24.179] ubi0:textures is mounted. [2025-09-24 09:26:24.249] RTNETLINK answers: File exists [2025-09-24 09:26:24.249] ubi1:dml_code is mounted. [2025-09-24 09:26:24.249] ubi2:animations is mounted. [2025-09-24 09:26:24.249] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:26:24.249] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:26:24.249] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:26:24.249] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:26:24.249] data.LB_FadeInType0=100 [2025-09-24 09:26:24.249] data.CHLH_FadeInType0=0 [2025-09-24 09:26:24.249] data.WU_FadeInDelay=0 [2025-09-24 09:26:24.249] max_time_out=0 [2025-09-24 09:26:24.249] No splash screen [2025-09-24 09:26:24.249] stop dss Done [2025-09-24 09:26:24.249] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:26:24.321] /dev/mem opened. [2025-09-24 09:26:24.321] Memory mapped at address 0xffff9cc0f000. [2025-09-24 09:26:24.321] Read at address 0x00600018 (0xffff9cc0f018): 0x00000000 [2025-09-24 09:26:24.321] Write at address 0x00600018 (0xffff9cc0f018): 0x00400040, readback 0x00400040 [2025-09-24 09:26:24.321] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:26:24.352] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:26:24.464] Loaded PowerVR consumer services. [2025-09-24 09:26:24.607] Waiting data available... [2025-09-24 09:26:24.607] 512+0 records in [2025-09-24 09:26:24.607] 512+0 records out [2025-09-24 09:26:24.639] Starting syslogd/klogd: done [2025-09-24 09:26:24.671] DML Start [2025-09-24 09:26:24.831] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:26:25.055] DML res1: 0 [2025-09-24 09:26:25.454] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:26:25.475] Read Success [2025-09-24 09:26:25.475] Verifying certificate... [2025-09-24 09:26:25.746] Verified OK [2025-09-24 09:26:25.762] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:26:27.296] Verified OK [2025-09-24 09:26:27.296] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:26:27.950] Verified OK [2025-09-24 09:26:27.950] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:26:30.700] fs.protected_hardlinks = 1 [2025-09-24 09:26:30.700] fs.protected_symlinks = 1 [2025-09-24 09:26:30.716] kernel.modules_disabled = 1 [2025-09-24 09:26:30.908] [2025-09-24 09:26:30.908] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:26:32.106] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:26:39.824] SBL1:1210.0.1.0 [2025-09-24 09:26:39.856] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:26:41.439] SBL2:1210.0.1.0 [2025-09-24 09:26:41.471] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:26:41.583] j-A [2025-09-24 09:26:48.953] The R5 Autosar Classic is running [2025-09-24 09:26:48.953] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:26:48.953] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:26:49.560] INIT: version 2.96 booting [2025-09-24 09:26:49.672] INIT: Entering runlevel: 5 [2025-09-24 09:26:49.815] mtd28 attached [2025-09-24 09:26:49.831] mtd24 attached [2025-09-24 09:26:49.848] mtd32 attached [2025-09-24 09:26:49.864] ubi0:animations is mounted. [2025-09-24 09:26:49.896] RTNETLINK answers: File exists [2025-09-24 09:26:49.896] ubi1:textures is mounted. [2025-09-24 09:26:49.896] ubi2:dml_code is mounted. [2025-09-24 09:26:49.950] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:26:49.950] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:26:49.950] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:26:49.950] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:26:49.950] data.LB_FadeInType0=100 [2025-09-24 09:26:49.950] data.CHLH_FadeInType0=0 [2025-09-24 09:26:49.950] data.WU_FadeInDelay=0 [2025-09-24 09:26:49.950] max_time_out=0 [2025-09-24 09:26:49.950] No splash screen [2025-09-24 09:26:49.950] stop dss Done [2025-09-24 09:26:49.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:26:49.982] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:26:50.020] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:26:50.020] /dev/mem opened. [2025-09-24 09:26:50.020] Memory mapped at address 0xffff9acf2000. [2025-09-24 09:26:50.020] Read at address 0x00600018 (0xffff9acf2018): 0x00000000 [2025-09-24 09:26:50.020] Write at address 0x00600018 (0xffff9acf2018): 0x00400040, readback 0x00400040 [2025-09-24 09:26:50.196] Loaded PowerVR consumer services. [2025-09-24 09:26:50.277] Waiting data available... [2025-09-24 09:26:50.293] 512+0 records in [2025-09-24 09:26:50.293] 512+0 records out [2025-09-24 09:26:50.324] Starting syslogd/klogd: done [2025-09-24 09:26:50.340] DML Start [2025-09-24 09:26:50.516] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:26:50.708] DML res1: 0 [2025-09-24 09:26:51.220] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:26:51.243] Read Success [2025-09-24 09:26:51.243] Verifying certificate... [2025-09-24 09:26:51.498] Verified OK [2025-09-24 09:26:51.498] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:26:53.185] Verified OK [2025-09-24 09:26:53.185] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:26:53.735] Verified OK [2025-09-24 09:26:53.735] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:26:56.165] fs.protected_hardlinks = 1 [2025-09-24 09:26:56.181] fs.protected_symlinks = 1 [2025-09-24 09:26:56.181] kernel.modules_disabled = 1 [2025-09-24 09:26:56.389] [2025-09-24 09:26:56.389] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:26:57.823] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:27:05.538] SBL1:1210.0.1.0 [2025-09-24 09:27:05.586] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:27:07.153] SBL2:1210.0.1.0 [2025-09-24 09:27:07.201] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:27:07.297] j-A [2025-09-24 09:27:14.652] The R5 Autosar Classic is running [2025-09-24 09:27:14.652] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:27:14.673] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:27:15.281] INIT: version 2.96 booting [2025-09-24 09:27:15.392] INIT: Entering runlevel: 5 [2025-09-24 09:27:15.536] mtd24 attached [2025-09-24 09:27:15.552] mtd28 attached [2025-09-24 09:27:15.568] mtd32 attached [2025-09-24 09:27:15.600] ubi0:textures is mounted. [2025-09-24 09:27:15.616] RTNETLINK answers: File exists [2025-09-24 09:27:15.675] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:27:15.675] ubi1:animations is mounted. [2025-09-24 09:27:15.675] ubi2:dml_code is mounted. [2025-09-24 09:27:15.675] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:27:15.675] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:27:15.675] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:27:15.675] data.LB_FadeInType0=100 [2025-09-24 09:27:15.675] data.CHLH_FadeInType0=0 [2025-09-24 09:27:15.675] data.WU_FadeInDelay=0 [2025-09-24 09:27:15.675] max_time_out=0 [2025-09-24 09:27:15.675] No splash screen [2025-09-24 09:27:15.675] stop dss Done [2025-09-24 09:27:15.675] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:27:15.766] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:27:15.766] /dev/mem opened. [2025-09-24 09:27:15.766] Memory mapped at address 0xffffa0d8b000. [2025-09-24 09:27:15.766] Read at address 0x00600018 (0xffffa0d8b018): 0x00000000 [2025-09-24 09:27:15.766] Write at address 0x00600018 (0xffffa0d8b018): 0x00400040, readback 0x00400040 [2025-09-24 09:27:15.766] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:27:15.878] Loaded PowerVR consumer services. [2025-09-24 09:27:16.021] Waiting data available... [2025-09-24 09:27:16.037] 512+0 records in [2025-09-24 09:27:16.037] 512+0 records out [2025-09-24 09:27:16.085] Starting syslogd/klogd: done [2025-09-24 09:27:16.101] DML Start [2025-09-24 09:27:16.293] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:27:16.517] DML res1: 0 [2025-09-24 09:27:16.941] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:27:16.941] Read Success [2025-09-24 09:27:16.941] Verifying certificate... [2025-09-24 09:27:17.213] Verified OK [2025-09-24 09:27:17.229] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:27:18.791] Verified OK [2025-09-24 09:27:18.791] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:27:19.447] Verified OK [2025-09-24 09:27:19.447] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:27:22.098] fs.protected_hardlinks = 1 [2025-09-24 09:27:22.098] fs.protected_symlinks = 1 [2025-09-24 09:27:22.098] kernel.modules_disabled = 1 [2025-09-24 09:27:22.290] [2025-09-24 09:27:22.290] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:27:23.566] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:27:31.241] SBL1:1210.0.1.0 [2025-09-24 09:27:31.289] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:27:32.856] SBL2:1210.0.1.0 [2025-09-24 09:27:32.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:27:32.999] j-A [2025-09-24 09:27:40.354] The R5 Autosar Classic is running [2025-09-24 09:27:40.376] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:27:40.376] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:27:40.983] INIT: version 2.96 booting [2025-09-24 09:27:41.096] INIT: Entering runlevel: 5 [2025-09-24 09:27:41.239] mtd32 attached [2025-09-24 09:27:41.255] mtd28 attached [2025-09-24 09:27:41.255] mtd24 attached [2025-09-24 09:27:41.319] ubi0:dml_code is mounted. [2025-09-24 09:27:41.319] RTNETLINK answers: File exists [2025-09-24 09:27:41.374] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:27:41.374] ubi1:animations is mounted. [2025-09-24 09:27:41.374] ubi2:textures is mounted. [2025-09-24 09:27:41.374] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:27:41.374] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:27:41.374] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:27:41.374] data.LB_FadeInType0=100 [2025-09-24 09:27:41.374] data.CHLH_FadeInType0=0 [2025-09-24 09:27:41.374] data.WU_FadeInDelay=0 [2025-09-24 09:27:41.374] max_time_out=0 [2025-09-24 09:27:41.374] No splash screen [2025-09-24 09:27:41.374] stop dss Done [2025-09-24 09:27:41.374] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:27:41.422] /dev/mem opened. [2025-09-24 09:27:41.463] Memory mapped at address 0xffffae1d7000. [2025-09-24 09:27:41.463] Read at address 0x00600018 (0xffffae1d7018): 0x00000000 [2025-09-24 09:27:41.463] Write at address 0x00600018 (0xffffae1d7018): 0x00400040, readback 0x00400040 [2025-09-24 09:27:41.463] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:27:41.463] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:27:41.671] Loaded PowerVR consumer services. [2025-09-24 09:27:41.719] 512+0 records in [2025-09-24 09:27:41.719] 512+0 records out [2025-09-24 09:27:41.735] Waiting data available... [2025-09-24 09:27:41.767] Starting syslogd/klogd: done [2025-09-24 09:27:41.783] DML Start [2025-09-24 09:27:41.975] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:27:42.182] DML res1: 0 [2025-09-24 09:27:42.662] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:27:42.678] Read Success [2025-09-24 09:27:42.678] Verifying certificate... [2025-09-24 09:27:42.902] Verified OK [2025-09-24 09:27:42.917] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:27:44.542] Verified OK [2025-09-24 09:27:44.542] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:27:45.070] Verified OK [2025-09-24 09:27:45.070] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:27:47.771] fs.protected_hardlinks = 1 [2025-09-24 09:27:47.771] fs.protected_symlinks = 1 [2025-09-24 09:27:47.787] kernel.modules_disabled = 1 [2025-09-24 09:27:47.979] [2025-09-24 09:27:47.979] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:27:49.261] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:27:56.962] SBL1:1210.0.1.0 [2025-09-24 09:27:56.993] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:27:58.577] SBL2:1210.0.1.0 [2025-09-24 09:27:58.609] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:27:58.721] j-A [2025-09-24 09:28:06.094] The R5 Autosar Classic is running [2025-09-24 09:28:06.094] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:28:06.094] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:28:06.702] INIT: version 2.96 booting [2025-09-24 09:28:06.814] INIT: Entering runlevel: 5 [2025-09-24 09:28:06.958] mtd24 attached [2025-09-24 09:28:06.974] mtd28 attached [2025-09-24 09:28:06.989] mtd32 attached [2025-09-24 09:28:07.021] ubi0:textures is mounted. [2025-09-24 09:28:07.037] RTNETLINK answers: File exists [2025-09-24 09:28:07.091] ubi1:animations is mounted. [2025-09-24 09:28:07.091] ubi2:dml_code is mounted. [2025-09-24 09:28:07.091] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:28:07.091] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:28:07.091] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:28:07.091] data.LB_FadeInType0=100 [2025-09-24 09:28:07.091] data.CHLH_FadeInType0=0 [2025-09-24 09:28:07.091] data.WU_FadeInDelay=0 [2025-09-24 09:28:07.091] max_time_out=0 [2025-09-24 09:28:07.091] No splash screen [2025-09-24 09:28:07.091] stop dss Done [2025-09-24 09:28:07.091] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:28:07.091] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:28:07.123] /dev/mem opened. [2025-09-24 09:28:07.160] Memory mapped at address 0xffffa8fd5000. [2025-09-24 09:28:07.160] Read at address 0x00600018 (0xffffa8fd5018): 0x00000000 [2025-09-24 09:28:07.160] Write at address 0x00600018 (0xffffa8fd5018): 0x00400040, readback 0x00400040 [2025-09-24 09:28:07.160] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:28:07.160] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:28:07.336] Loaded PowerVR consumer services. [2025-09-24 09:28:07.432] Waiting data available... [2025-09-24 09:28:07.464] 512+0 records in [2025-09-24 09:28:07.464] 512+0 records out [2025-09-24 09:28:07.480] Starting syslogd/klogd: done [2025-09-24 09:28:07.512] DML Start [2025-09-24 09:28:07.640] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:28:07.863] DML res1: 0 [2025-09-24 09:28:08.323] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:28:08.323] Read Success [2025-09-24 09:28:08.323] Verifying certificate... [2025-09-24 09:28:08.610] Verified OK [2025-09-24 09:28:08.627] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:28:10.315] Verified OK [2025-09-24 09:28:10.315] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:28:10.841] Verified OK [2025-09-24 09:28:10.841] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:28:13.288] fs.protected_hardlinks = 1 [2025-09-24 09:28:13.318] fs.protected_symlinks = 1 [2025-09-24 09:28:13.318] kernel.modules_disabled = 1 [2025-09-24 09:28:13.493] [2025-09-24 09:28:13.493] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:28:14.974] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:28:22.678] SBL1:1210.0.1.0 [2025-09-24 09:28:22.710] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:28:24.292] SBL2:1210.0.1.0 [2025-09-24 09:28:24.325] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:28:24.437] j-A [2025-09-24 09:28:31.807] The R5 Autosar Classic is running [2025-09-24 09:28:31.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:28:31.807] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:28:32.414] INIT: version 2.96 booting [2025-09-24 09:28:32.527] INIT: Entering runlevel: 5 [2025-09-24 09:28:32.670] mtd28 attached [2025-09-24 09:28:32.686] mtd24 attached [2025-09-24 09:28:32.702] mtd32 attached [2025-09-24 09:28:32.718] ubi0:animations is mounted. [2025-09-24 09:28:32.802] RTNETLINK answers: File exists [2025-09-24 09:28:32.802] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:28:32.802] ubi2:dml_code is mounted. [2025-09-24 09:28:32.802] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:28:32.802] ubi1:textures is mounted. [2025-09-24 09:28:32.802] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:28:32.802] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:28:32.802] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:28:32.802] data.LB_FadeInType0=100 [2025-09-24 09:28:32.802] data.CHLH_FadeInType0=0 [2025-09-24 09:28:32.802] data.WU_FadeInDelay=0 [2025-09-24 09:28:32.802] max_time_out=0 [2025-09-24 09:28:32.802] No splash screen [2025-09-24 09:28:32.802] stop dss Done [2025-09-24 09:28:32.873] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:28:32.873] /dev/mem opened. [2025-09-24 09:28:32.873] Memory mapped at address 0xffffb28c9000. [2025-09-24 09:28:32.873] Read at address 0x00600018 (0xffffb28c9018): 0x00000000 [2025-09-24 09:28:32.873] Write at address 0x00600018 (0xffffb28c9018): 0x00400040, readback 0x00400040 [2025-09-24 09:28:32.873] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:28:33.096] Loaded PowerVR consumer services. [2025-09-24 09:28:33.128] Waiting data available... [2025-09-24 09:28:33.144] 512+0 records in [2025-09-24 09:28:33.144] 512+0 records out [2025-09-24 09:28:33.176] Starting syslogd/klogd: done [2025-09-24 09:28:33.192] DML Start [2025-09-24 09:28:33.336] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:28:33.528] DML res1: 0 [2025-09-24 09:28:34.040] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:28:34.061] Read Success [2025-09-24 09:28:34.061] Verifying certificate... [2025-09-24 09:28:34.285] Verified OK [2025-09-24 09:28:34.301] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:28:35.979] Verified OK [2025-09-24 09:28:35.979] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:28:36.627] Verified OK [2025-09-24 09:28:36.627] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:28:39.169] fs.protected_hardlinks = 1 [2025-09-24 09:28:39.169] fs.protected_symlinks = 1 [2025-09-24 09:28:39.185] kernel.modules_disabled = 1 [2025-09-24 09:28:39.377] [2025-09-24 09:28:39.377] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:28:40.647] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:28:48.384] SBL1:1210.0.1.0 [2025-09-24 09:28:48.416] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:28:49.998] SBL2:1210.0.1.0 [2025-09-24 09:28:50.030] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:28:50.142] j-A [2025-09-24 09:28:57.513] The R5 Autosar Classic is running [2025-09-24 09:28:57.513] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:28:57.513] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:28:58.121] INIT: version 2.96 booting [2025-09-24 09:28:58.232] INIT: Entering runlevel: 5 [2025-09-24 09:28:58.376] mtd28 attached [2025-09-24 09:28:58.392] mtd24 attached [2025-09-24 09:28:58.408] mtd32 attached [2025-09-24 09:28:58.424] ubi0:animations is mounted. [2025-09-24 09:28:58.456] ubi1:textures is mounted. [2025-09-24 09:28:58.515] RTNETLINK answers: File exists [2025-09-24 09:28:58.515] ubi2:dml_code is mounted. [2025-09-24 09:28:58.515] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:28:58.515] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:28:58.515] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:28:58.515] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:28:58.515] data.LB_FadeInType0=100 [2025-09-24 09:28:58.515] data.CHLH_FadeInType0=0 [2025-09-24 09:28:58.515] data.WU_FadeInDelay=0 [2025-09-24 09:28:58.515] max_time_out=0 [2025-09-24 09:28:58.515] No splash screen [2025-09-24 09:28:58.515] stop dss Done [2025-09-24 09:28:58.515] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:28:58.588] /dev/mem opened. [2025-09-24 09:28:58.588] Memory mapped at address 0xffffb34a2000. [2025-09-24 09:28:58.588] Read at address 0x00600018 (0xffffb34a2018): 0x00000000 [2025-09-24 09:28:58.588] Write at address 0x00600018 (0xffffb34a2018): 0x00400040, readback 0x00400040 [2025-09-24 09:28:58.588] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:28:58.588] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:28:58.811] Loaded PowerVR consumer services. [2025-09-24 09:28:58.875] 512+0 records in [2025-09-24 09:28:58.875] 512+0 records out [2025-09-24 09:28:58.875] Waiting data available... [2025-09-24 09:28:58.906] Starting syslogd/klogd: done [2025-09-24 09:28:58.938] DML Start [2025-09-24 09:28:59.083] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:28:59.306] DML res1: 0 [2025-09-24 09:28:59.802] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:28:59.818] Read Success [2025-09-24 09:28:59.818] Verifying certificate... [2025-09-24 09:29:00.106] Verified OK [2025-09-24 09:29:00.122] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:29:01.776] Verified OK [2025-09-24 09:29:01.776] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:29:02.425] Verified OK [2025-09-24 09:29:02.425] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:29:04.983] fs.protected_hardlinks = 1 [2025-09-24 09:29:04.983] fs.protected_symlinks = 1 [2025-09-24 09:29:04.999] kernel.modules_disabled = 1 [2025-09-24 09:29:05.191] [2025-09-24 09:29:05.191] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:29:06.400] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:29:14.084] SBL1:1210.0.1.0 [2025-09-24 09:29:14.116] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:29:15.698] SBL2:1210.0.1.0 [2025-09-24 09:29:15.730] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:29:15.842] j-A [2025-09-24 09:29:23.214] The R5 Autosar Classic is running [2025-09-24 09:29:23.214] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:29:23.214] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:29:23.823] INIT: version 2.96 booting [2025-09-24 09:29:23.934] INIT: Entering runlevel: 5 [2025-09-24 09:29:24.094] mtd32 attached [2025-09-24 09:29:24.094] mtd24 attached [2025-09-24 09:29:24.110] mtd28 attached [2025-09-24 09:29:24.158] RTNETLINK answers: File exists [2025-09-24 09:29:24.158] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:29:24.199] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:29:24.199] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:29:24.199] ubi0:dml_code is mounted. [2025-09-24 09:29:24.199] ubi2:animations is mounted. [2025-09-24 09:29:24.199] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:29:24.199] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:29:24.199] ubi1:textures is mounted. [2025-09-24 09:29:24.224] data.LB_FadeInType0=100 [2025-09-24 09:29:24.224] data.CHLH_FadeInType0=0 [2025-09-24 09:29:24.224] data.WU_FadeInDelay=0 [2025-09-24 09:29:24.224] max_time_out=0 [2025-09-24 09:29:24.224] No splash screen [2025-09-24 09:29:24.224] stop dss Done [2025-09-24 09:29:24.240] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:29:24.256] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:29:24.308] /dev/mem opened. [2025-09-24 09:29:24.308] Memory mapped at address 0xffff913fc000. [2025-09-24 09:29:24.308] Read at address 0x00600018 (0xffff913fc018): 0x00000000 [2025-09-24 09:29:24.308] Write at address 0x00600018 (0xffff913fc018): 0x00400040, readback 0x00400040 [2025-09-24 09:29:24.468] Loaded PowerVR consumer services. [2025-09-24 09:29:24.548] Waiting data available... [2025-09-24 09:29:24.564] 512+0 records in [2025-09-24 09:29:24.564] 512+0 records out [2025-09-24 09:29:24.596] Starting syslogd/klogd: done [2025-09-24 09:29:24.612] DML Start [2025-09-24 09:29:24.788] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:29:25.076] DML res1: 0 [2025-09-24 09:29:25.391] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:29:25.391] Read Success [2025-09-24 09:29:25.391] Verifying certificate... [2025-09-24 09:29:25.631] Verified OK [2025-09-24 09:29:25.647] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:29:27.331] Verified OK [2025-09-24 09:29:27.331] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:29:27.923] Verified OK [2025-09-24 09:29:27.923] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:29:30.529] fs.protected_hardlinks = 1 [2025-09-24 09:29:30.545] fs.protected_symlinks = 1 [2025-09-24 09:29:30.545] kernel.modules_disabled = 1 [2025-09-24 09:29:30.736] [2025-09-24 09:29:30.736] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:29:32.101] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:29:39.793] SBL1:1210.0.1.0 [2025-09-24 09:29:39.841] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:29:41.408] SBL2:1210.0.1.0 [2025-09-24 09:29:41.455] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:29:41.551] j-A [2025-09-24 09:29:48.905] The R5 Autosar Classic is running [2025-09-24 09:29:48.930] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:29:48.930] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:29:49.537] INIT: version 2.96 booting [2025-09-24 09:29:49.649] INIT: Entering runlevel: 5 [2025-09-24 09:29:49.809] mtd24 attached [2025-09-24 09:29:49.809] mtd28 attached [2025-09-24 09:29:49.857] mtd32 attached [2025-09-24 09:29:49.857] ubi0:textures is mounted. [2025-09-24 09:29:49.873] ubi1:animations is mounted. [2025-09-24 09:29:49.873] RTNETLINK answers: File exists [2025-09-24 09:29:49.918] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:29:49.918] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:29:49.918] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:29:49.918] ubi2:dml_code is mounted. [2025-09-24 09:29:49.918] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:29:49.918] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:29:49.943] data.LB_FadeInType0=100 [2025-09-24 09:29:49.943] data.CHLH_FadeInType0=0 [2025-09-24 09:29:49.943] data.WU_FadeInDelay=0 [2025-09-24 09:29:49.943] max_time_out=0 [2025-09-24 09:29:49.943] No splash screen [2025-09-24 09:29:49.943] stop dss Done [2025-09-24 09:29:49.959] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:29:49.975] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:29:49.991] /dev/mem opened. [2025-09-24 09:29:49.991] Memory mapped at address 0xffff9a6eb000. [2025-09-24 09:29:50.018] Read at address 0x00600018 (0xffff9a6eb018): 0x00000000 [2025-09-24 09:29:50.018] Write at address 0x00600018 (0xffff9a6eb018): 0x00400040, readback 0x00400040 [2025-09-24 09:29:50.129] Loaded PowerVR consumer services. [2025-09-24 09:29:50.257] Waiting data available... [2025-09-24 09:29:50.273] 512+0 records in [2025-09-24 09:29:50.273] 512+0 records out [2025-09-24 09:29:50.289] Starting syslogd/klogd: done [2025-09-24 09:29:50.305] DML Start [2025-09-24 09:29:50.481] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:29:50.705] DML res1: 0 [2025-09-24 09:29:51.191] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:29:51.191] Read Success [2025-09-24 09:29:51.191] Verifying certificate... [2025-09-24 09:29:51.415] Verified OK [2025-09-24 09:29:51.415] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:29:53.266] Verified OK [2025-09-24 09:29:53.266] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:29:53.802] Verified OK [2025-09-24 09:29:53.802] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:29:56.248] fs.protected_hardlinks = 1 [2025-09-24 09:29:56.276] fs.protected_symlinks = 1 [2025-09-24 09:29:56.276] kernel.modules_disabled = 1 [2025-09-24 09:29:56.468] [2025-09-24 09:29:56.468] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:29:57.748] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:30:05.517] SBL1:1210.0.1.0 [2025-09-24 09:30:05.549] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:30:07.132] SBL2:1210.0.1.0 [2025-09-24 09:30:07.164] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:30:07.275] j-A [2025-09-24 09:30:14.629] The R5 Autosar Classic is running [2025-09-24 09:30:14.629] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:30:14.650] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:30:15.258] INIT: version 2.96 booting [2025-09-24 09:30:15.369] INIT: Entering runlevel: 5 [2025-09-24 09:30:15.513] mtd24 attached [2025-09-24 09:30:15.529] mtd28 attached [2025-09-24 09:30:15.545] mtd32 attached [2025-09-24 09:30:15.648] ubi0:textures is mounted. [2025-09-24 09:30:15.648] RTNETLINK answers: File exists [2025-09-24 09:30:15.648] ubi1:animations is mounted. [2025-09-24 09:30:15.648] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:30:15.648] ubi2:dml_code is mounted. [2025-09-24 09:30:15.648] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:30:15.648] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:30:15.648] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:30:15.648] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:30:15.648] data.LB_FadeInType0=100 [2025-09-24 09:30:15.648] data.CHLH_FadeInType0=0 [2025-09-24 09:30:15.648] data.WU_FadeInDelay=0 [2025-09-24 09:30:15.648] max_time_out=0 [2025-09-24 09:30:15.648] No splash screen [2025-09-24 09:30:15.648] stop dss Done [2025-09-24 09:30:15.696] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:30:15.696] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:30:15.730] /dev/mem opened. [2025-09-24 09:30:15.730] Memory mapped at address 0xffffbe8d3000. [2025-09-24 09:30:15.730] Read at address 0x00600018 (0xffffbe8d3018): 0x00000000 [2025-09-24 09:30:15.730] Write at address 0x00600018 (0xffffbe8d3018): 0x00400040, readback 0x00400040 [2025-09-24 09:30:15.842] Loaded PowerVR consumer services. [2025-09-24 09:30:15.997] Waiting data available... [2025-09-24 09:30:15.997] 512+0 records in [2025-09-24 09:30:15.997] 512+0 records out [2025-09-24 09:30:16.028] Starting syslogd/klogd: done [2025-09-24 09:30:16.045] DML Start [2025-09-24 09:30:16.221] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:30:16.444] DML res1: 0 [2025-09-24 09:30:16.929] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:30:16.929] Read Success [2025-09-24 09:30:16.929] Verifying certificate... [2025-09-24 09:30:17.153] Verified OK [2025-09-24 09:30:17.169] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:30:18.896] Verified OK [2025-09-24 09:30:18.896] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:30:19.563] Verified OK [2025-09-24 09:30:19.563] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:30:22.074] fs.protected_hardlinks = 1 [2025-09-24 09:30:22.074] fs.protected_symlinks = 1 [2025-09-24 09:30:22.090] kernel.modules_disabled = 1 [2025-09-24 09:30:22.281] [2025-09-24 09:30:22.281] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:30:23.476] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:30:31.223] SBL1:1210.0.1.0 [2025-09-24 09:30:31.271] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:30:32.838] SBL2:1210.0.1.0 [2025-09-24 09:30:32.886] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:30:32.998] j-A [2025-09-24 09:30:40.367] The R5 Autosar Classic is running [2025-09-24 09:30:40.367] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:30:40.367] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:30:40.974] INIT: version 2.96 booting [2025-09-24 09:30:41.087] INIT: Entering runlevel: 5 [2025-09-24 09:30:41.247] mtd32 attached [2025-09-24 09:30:41.247] mtd24 attached [2025-09-24 09:30:41.262] mtd28 attached [2025-09-24 09:30:41.310] ubi0:dml_code is mounted. [2025-09-24 09:30:41.310] RTNETLINK answers: File exists [2025-09-24 09:30:41.350] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:30:41.350] ubi1:textures is mounted. [2025-09-24 09:30:41.350] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:30:41.350] ubi2:animations is mounted. [2025-09-24 09:30:41.350] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:30:41.350] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:30:41.350] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:30:41.371] data.LB_FadeInType0=100 [2025-09-24 09:30:41.371] data.CHLH_FadeInType0=0 [2025-09-24 09:30:41.371] data.WU_FadeInDelay=0 [2025-09-24 09:30:41.371] max_time_out=0 [2025-09-24 09:30:41.371] No splash screen [2025-09-24 09:30:41.371] stop dss Done [2025-09-24 09:30:41.420] /dev/mem opened. [2025-09-24 09:30:41.420] Memory mapped at address 0xffff8443b000. [2025-09-24 09:30:41.459] Read at address 0x00600018 (0xffff8443b018): 0x00000000 [2025-09-24 09:30:41.459] Write at address 0x00600018 (0xffff8443b018): 0x00400040, readback 0x00400040 [2025-09-24 09:30:41.459] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:30:41.459] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:30:41.667] Loaded PowerVR consumer services. [2025-09-24 09:30:41.715] Waiting data available... [2025-09-24 09:30:41.731] 512+0 records in [2025-09-24 09:30:41.731] 512+0 records out [2025-09-24 09:30:41.747] Starting syslogd/klogd: done [2025-09-24 09:30:41.763] DML Start [2025-09-24 09:30:41.923] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:30:42.162] DML res1: 0 [2025-09-24 09:30:42.606] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:30:42.606] Read Success [2025-09-24 09:30:42.606] Verifying certificate... [2025-09-24 09:30:42.878] Verified OK [2025-09-24 09:30:42.894] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:30:44.419] Verified OK [2025-09-24 09:30:44.419] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:30:45.024] Verified OK [2025-09-24 09:30:45.024] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:30:47.742] fs.protected_hardlinks = 1 [2025-09-24 09:30:47.742] fs.protected_symlinks = 1 [2025-09-24 09:30:47.757] kernel.modules_disabled = 1 [2025-09-24 09:30:47.949] [2025-09-24 09:30:47.949] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:30:49.189] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:30:56.955] SBL1:1210.0.1.0 [2025-09-24 09:30:56.987] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:30:58.569] SBL2:1210.0.1.0 [2025-09-24 09:30:58.601] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:30:58.713] j-A [2025-09-24 09:31:06.066] The R5 Autosar Classic is running [2025-09-24 09:31:06.066] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:31:06.087] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:31:06.695] INIT: version 2.96 booting [2025-09-24 09:31:06.806] INIT: Entering runlevel: 5 [2025-09-24 09:31:06.950] mtd28 attached [2025-09-24 09:31:06.966] mtd24 attached [2025-09-24 09:31:06.966] mtd32 attached [2025-09-24 09:31:06.998] ubi0:animations is mounted. [2025-09-24 09:31:07.030] ubi1:textures is mounted. [2025-09-24 09:31:07.030] RTNETLINK answers: File exists [2025-09-24 09:31:07.085] ubi2:dml_code is mounted. [2025-09-24 09:31:07.085] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:31:07.085] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:31:07.085] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:31:07.085] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:31:07.085] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:31:07.085] data.LB_FadeInType0=100 [2025-09-24 09:31:07.085] data.CHLH_FadeInType0=0 [2025-09-24 09:31:07.085] data.WU_FadeInDelay=0 [2025-09-24 09:31:07.085] max_time_out=0 [2025-09-24 09:31:07.085] No splash screen [2025-09-24 09:31:07.085] stop dss Done [2025-09-24 09:31:07.158] /dev/mem opened. [2025-09-24 09:31:07.158] Memory mapped at address 0xffff9a647000. [2025-09-24 09:31:07.158] Read at address 0x00600018 (0xffff9a647018): 0x00000000 [2025-09-24 09:31:07.158] Write at address 0x00600018 (0xffff9a647018): 0x00400040, readback 0x00400040 [2025-09-24 09:31:07.183] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:31:07.183] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:31:07.294] Loaded PowerVR consumer services. [2025-09-24 09:31:07.423] Waiting data available... [2025-09-24 09:31:07.439] 512+0 records in [2025-09-24 09:31:07.439] 512+0 records out [2025-09-24 09:31:07.470] Starting syslogd/klogd: done [2025-09-24 09:31:07.486] DML Start [2025-09-24 09:31:07.647] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:31:07.886] DML res1: 0 [2025-09-24 09:31:08.346] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:31:08.346] Read Success [2025-09-24 09:31:08.346] Verifying certificate... [2025-09-24 09:31:08.587] Verified OK [2025-09-24 09:31:08.603] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:31:10.351] Verified OK [2025-09-24 09:31:10.351] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:31:10.879] Verified OK [2025-09-24 09:31:10.879] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:31:13.421] fs.protected_hardlinks = 1 [2025-09-24 09:31:13.437] fs.protected_symlinks = 1 [2025-09-24 09:31:13.437] kernel.modules_disabled = 1 [2025-09-24 09:31:13.645] [2025-09-24 09:31:13.645] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:31:14.931] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:31:22.655] SBL1:1210.0.1.0 [2025-09-24 09:31:22.687] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:31:24.270] SBL2:1210.0.1.0 [2025-09-24 09:31:24.302] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:31:24.415] j-A [2025-09-24 09:31:31.768] The R5 Autosar Classic is running [2025-09-24 09:31:31.768] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:31:31.788] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:31:32.396] INIT: version 2.96 booting [2025-09-24 09:31:32.507] INIT: Entering runlevel: 5 [2025-09-24 09:31:32.668] mtd28 attached [2025-09-24 09:31:32.668] mtd24 attached [2025-09-24 09:31:32.684] mtd32 attached [2025-09-24 09:31:32.715] ubi0:animations is mounted. [2025-09-24 09:31:32.731] RTNETLINK answers: File exists [2025-09-24 09:31:32.731] ubi1:textures is mounted. [2025-09-24 09:31:32.792] ubi2:dml_code is mounted. [2025-09-24 09:31:32.792] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:31:32.792] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:31:32.792] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:31:32.792] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:31:32.792] data.LB_FadeInType0=100 [2025-09-24 09:31:32.792] data.CHLH_FadeInType0=0 [2025-09-24 09:31:32.792] data.WU_FadeInDelay=0 [2025-09-24 09:31:32.792] max_time_out=0 [2025-09-24 09:31:32.792] No splash screen [2025-09-24 09:31:32.792] stop dss Done [2025-09-24 09:31:32.792] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:31:32.840] /dev/mem opened. [2025-09-24 09:31:32.840] Memory mapped at address 0xffff8f4c3000. [2025-09-24 09:31:32.866] Read at address 0x00600018 (0xffff8f4c3018): 0x00000000 [2025-09-24 09:31:32.866] Write at address 0x00600018 (0xffff8f4c3018): 0x00400040, readback 0x00400040 [2025-09-24 09:31:32.898] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:31:32.898] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:31:33.106] Loaded PowerVR consumer services. [2025-09-24 09:31:33.138] 512+0 records in [2025-09-24 09:31:33.138] 512+0 records out [2025-09-24 09:31:33.186] Starting syslogd/klogd: Waiting data available... [2025-09-24 09:31:33.202] done [2025-09-24 09:31:33.202] DML Start [2025-09-24 09:31:33.378] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:31:33.586] DML res1: 0 [2025-09-24 09:31:34.041] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:31:34.041] Read Success [2025-09-24 09:31:34.041] Verifying certificate... [2025-09-24 09:31:34.313] Verified OK [2025-09-24 09:31:34.345] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:31:35.895] Verified OK [2025-09-24 09:31:35.911] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:31:36.582] Verified OK [2025-09-24 09:31:36.582] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:31:39.236] fs.protected_hardlinks = 1 [2025-09-24 09:31:39.251] fs.protected_symlinks = 1 [2025-09-24 09:31:39.251] kernel.modules_disabled = 1 [2025-09-24 09:31:39.443] [2025-09-24 09:31:39.443] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:31:40.645] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:31:48.355] SBL1:1210.0.1.0 [2025-09-24 09:31:48.403] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:31:49.970] SBL2:1210.0.1.0 [2025-09-24 09:31:50.018] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:31:50.129] j-A [2025-09-24 09:31:57.467] The R5 Autosar Classic is running [2025-09-24 09:31:57.492] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:31:57.492] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:31:58.100] INIT: version 2.96 booting [2025-09-24 09:31:58.212] INIT: Entering runlevel: 5 [2025-09-24 09:31:58.371] mtd24 attached [2025-09-24 09:31:58.371] mtd28 attached [2025-09-24 09:31:58.387] mtd32 attached [2025-09-24 09:31:58.436] ubi0:textures is mounted. [2025-09-24 09:31:58.436] RTNETLINK answers: File exists [2025-09-24 09:31:58.452] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:31:58.452] ubi1:animations is mounted. [2025-09-24 09:31:58.502] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:31:58.502] ubi2:dml_code is mounted. [2025-09-24 09:31:58.502] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:31:58.502] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:31:58.502] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:31:58.502] data.LB_FadeInType0=100 [2025-09-24 09:31:58.502] data.CHLH_FadeInType0=0 [2025-09-24 09:31:58.502] data.WU_FadeInDelay=0 [2025-09-24 09:31:58.502] max_time_out=0 [2025-09-24 09:31:58.502] No splash screen [2025-09-24 09:31:58.502] stop dss Done [2025-09-24 09:31:58.549] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:31:58.593] /dev/mem opened. [2025-09-24 09:31:58.593] Memory mapped at address 0xffff94551000. [2025-09-24 09:31:58.593] Read at address 0x00600018 (0xffff94551018): 0x00000000 [2025-09-24 09:31:58.593] Write at address 0x00600018 (0xffff94551018): 0x00400040, readback 0x00400040 [2025-09-24 09:31:58.593] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:31:58.673] Loaded PowerVR consumer services. [2025-09-24 09:31:58.845] Waiting data available... [2025-09-24 09:31:58.845] 512+0 records in [2025-09-24 09:31:58.845] 512+0 records out [2025-09-24 09:31:58.860] Starting syslogd/klogd: done [2025-09-24 09:31:58.877] DML Start [2025-09-24 09:31:59.053] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:31:59.276] DML res1: 0 [2025-09-24 09:31:59.729] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:31:59.729] Read Success [2025-09-24 09:31:59.729] Verifying certificate... [2025-09-24 09:31:59.984] Verified OK [2025-09-24 09:31:59.984] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:32:01.599] Verified OK [2025-09-24 09:32:01.599] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:32:02.249] Verified OK [2025-09-24 09:32:02.249] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:32:05.030] fs.protected_hardlinks = 1 [2025-09-24 09:32:05.057] fs.protected_symlinks = 1 [2025-09-24 09:32:05.057] kernel.modules_disabled = 1 [2025-09-24 09:32:05.250] [2025-09-24 09:32:05.250] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:32:06.366] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:32:14.075] SBL1:1210.0.1.0 [2025-09-24 09:32:14.106] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:32:15.689] SBL2:1210.0.1.0 [2025-09-24 09:32:15.721] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:32:15.832] j-A [2025-09-24 09:32:23.202] The R5 Autosar Classic is running [2025-09-24 09:32:23.202] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:32:23.202] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:32:23.810] INIT: version 2.96 booting [2025-09-24 09:32:23.922] INIT: Entering runlevel: 5 [2025-09-24 09:32:24.082] mtd24 attached [2025-09-24 09:32:24.082] mtd28 attached [2025-09-24 09:32:24.097] mtd32 attached [2025-09-24 09:32:24.113] ubi0:textures is mounted. [2025-09-24 09:32:24.145] RTNETLINK answers: File exists [2025-09-24 09:32:24.206] ubi1:animations is mounted. [2025-09-24 09:32:24.206] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:32:24.206] ubi2:dml_code is mounted. [2025-09-24 09:32:24.206] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:32:24.206] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:32:24.206] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:32:24.206] data.LB_FadeInType0=100 [2025-09-24 09:32:24.206] data.CHLH_FadeInType0=0 [2025-09-24 09:32:24.206] data.WU_FadeInDelay=0 [2025-09-24 09:32:24.206] max_time_out=0 [2025-09-24 09:32:24.206] No splash screen [2025-09-24 09:32:24.206] stop dss Done [2025-09-24 09:32:24.206] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:32:24.254] /dev/mem opened. [2025-09-24 09:32:24.279] Memory mapped at address 0xffffb9bd8000. [2025-09-24 09:32:24.279] Read at address 0x00600018 (0xffffb9bd8018): 0x00000000 [2025-09-24 09:32:24.279] Write at address 0x00600018 (0xffffb9bd8018): 0x00400040, readback 0x00400040 [2025-09-24 09:32:24.327] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:32:24.343] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:32:24.471] Loaded PowerVR consumer services. [2025-09-24 09:32:24.567] Waiting data available... [2025-09-24 09:32:24.583] 512+0 records in [2025-09-24 09:32:24.583] 512+0 records out [2025-09-24 09:32:24.631] Starting syslogd/klogd: done [2025-09-24 09:32:24.648] DML Start [2025-09-24 09:32:24.807] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:32:24.999] DML res1: 0 [2025-09-24 09:32:25.478] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:32:25.499] Read Success [2025-09-24 09:32:25.499] Verifying certificate... [2025-09-24 09:32:25.723] Verified OK [2025-09-24 09:32:25.739] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:32:27.480] Verified OK [2025-09-24 09:32:27.480] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:32:28.098] Verified OK [2025-09-24 09:32:28.098] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:32:30.607] fs.protected_hardlinks = 1 [2025-09-24 09:32:30.624] fs.protected_symlinks = 1 [2025-09-24 09:32:30.624] kernel.modules_disabled = 1 [2025-09-24 09:32:30.799] [2025-09-24 09:32:30.799] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:32:32.086] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:32:39.778] SBL1:1210.0.1.0 [2025-09-24 09:32:39.810] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:32:41.393] SBL2:1210.0.1.0 [2025-09-24 09:32:41.424] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:32:41.536] j-A [2025-09-24 09:32:48.908] The R5 Autosar Classic is running [2025-09-24 09:32:48.908] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:32:48.908] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:32:49.515] INIT: version 2.96 booting [2025-09-24 09:32:49.626] INIT: Entering runlevel: 5 [2025-09-24 09:32:49.771] mtd24 attached [2025-09-24 09:32:49.787] mtd28 attached [2025-09-24 09:32:49.803] mtd32 attached [2025-09-24 09:32:49.835] ubi0:textures is mounted. [2025-09-24 09:32:49.906] RTNETLINK answers: File exists [2025-09-24 09:32:49.906] ubi1:animations is mounted. [2025-09-24 09:32:49.906] ubi2:dml_code is mounted. [2025-09-24 09:32:49.906] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:32:49.906] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:32:49.906] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:32:49.906] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:32:49.906] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:32:49.906] data.LB_FadeInType0=100 [2025-09-24 09:32:49.906] data.CHLH_FadeInType0=0 [2025-09-24 09:32:49.906] data.WU_FadeInDelay=0 [2025-09-24 09:32:49.906] max_time_out=0 [2025-09-24 09:32:49.906] No splash screen [2025-09-24 09:32:49.906] stop dss Done [2025-09-24 09:32:49.979] /dev/mem opened. [2025-09-24 09:32:49.979] Memory mapped at address 0xffff9587f000. [2025-09-24 09:32:49.979] Read at address 0x00600018 (0xffff9587f018): 0x00000000 [2025-09-24 09:32:49.979] Write at address 0x00600018 (0xffff9587f018): 0x00400040, readback 0x00400040 [2025-09-24 09:32:49.979] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:32:49.995] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:32:50.235] Loaded PowerVR consumer services. [2025-09-24 09:32:50.235] Waiting data available... [2025-09-24 09:32:50.266] 512+0 records in [2025-09-24 09:32:50.266] 512+0 records out [2025-09-24 09:32:50.314] Starting syslogd/klogd: done [2025-09-24 09:32:50.330] DML Start [2025-09-24 09:32:50.474] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:32:50.714] DML res1: 0 [2025-09-24 09:32:51.183] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:32:51.183] Read Success [2025-09-24 09:32:51.183] Verifying certificate... [2025-09-24 09:32:51.407] Verified OK [2025-09-24 09:32:51.423] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:32:53.141] Verified OK [2025-09-24 09:32:53.141] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:32:53.748] Verified OK [2025-09-24 09:32:53.748] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:32:56.305] fs.protected_hardlinks = 1 [2025-09-24 09:32:56.305] fs.protected_symlinks = 1 [2025-09-24 09:32:56.322] kernel.modules_disabled = 1 [2025-09-24 09:32:56.513] [2025-09-24 09:32:56.513] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:32:57.769] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:33:05.485] SBL1:1210.0.1.0 [2025-09-24 09:33:05.533] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:33:07.099] SBL2:1210.0.1.0 [2025-09-24 09:33:07.131] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:33:07.244] j-A [2025-09-24 09:33:14.598] The R5 Autosar Classic is running [2025-09-24 09:33:14.598] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:33:14.619] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:33:15.227] INIT: version 2.96 booting [2025-09-24 09:33:15.338] INIT: Entering runlevel: 5 [2025-09-24 09:33:15.499] mtd32 attached [2025-09-24 09:33:15.514] mtd28 attached [2025-09-24 09:33:15.514] mtd24 attached [2025-09-24 09:33:15.562] RTNETLINK answers: File exists [2025-09-24 09:33:15.610] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:33:15.610] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:33:15.610] ubi0:dml_code is mounted. [2025-09-24 09:33:15.610] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:33:15.610] ubi2:textures is mounted. [2025-09-24 09:33:15.610] ubi1:animations is mounted. [2025-09-24 09:33:15.610] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:33:15.610] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:33:15.639] data.LB_FadeInType0=100 [2025-09-24 09:33:15.639] data.CHLH_FadeInType0=0 [2025-09-24 09:33:15.639] data.WU_FadeInDelay=0 [2025-09-24 09:33:15.639] max_time_out=0 [2025-09-24 09:33:15.639] No splash screen [2025-09-24 09:33:15.639] stop dss Done [2025-09-24 09:33:15.665] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:33:15.665] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:33:15.718] /dev/mem opened. [2025-09-24 09:33:15.718] Memory mapped at address 0xffffb51df000. [2025-09-24 09:33:15.718] Read at address 0x00600018 (0xffffb51df018): 0x00000000 [2025-09-24 09:33:15.718] Write at address 0x00600018 (0xffffb51df018): 0x00400040, readback 0x00400040 [2025-09-24 09:33:15.782] Loaded PowerVR consumer services. [2025-09-24 09:33:15.942] Waiting data available... [2025-09-24 09:33:15.958] 512+0 records in [2025-09-24 09:33:15.958] 512+0 records out [2025-09-24 09:33:16.005] Starting syslogd/klogd: done [2025-09-24 09:33:16.021] DML Start [2025-09-24 09:33:16.198] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:33:16.405] DML res1: 0 [2025-09-24 09:33:16.877] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:33:16.877] Read Success [2025-09-24 09:33:16.877] Verifying certificate... [2025-09-24 09:33:17.117] Verified OK [2025-09-24 09:33:17.133] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:33:18.817] Verified OK [2025-09-24 09:33:18.817] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:33:19.409] Verified OK [2025-09-24 09:33:19.409] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:33:22.094] fs.protected_hardlinks = 1 [2025-09-24 09:33:22.094] fs.protected_symlinks = 1 [2025-09-24 09:33:22.110] kernel.modules_disabled = 1 [2025-09-24 09:33:22.302] [2025-09-24 09:33:22.302] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:33:23.446] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:33:31.172] SBL1:1210.0.1.0 [2025-09-24 09:33:31.204] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:33:32.786] SBL2:1210.0.1.0 [2025-09-24 09:33:32.818] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:33:32.931] j-A [2025-09-24 09:33:40.305] The R5 Autosar Classic is running [2025-09-24 09:33:40.305] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:33:40.305] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:33:40.913] INIT: version 2.96 booting [2025-09-24 09:33:41.025] INIT: Entering runlevel: 5 [2025-09-24 09:33:41.169] mtd28 attached [2025-09-24 09:33:41.185] mtd24 attached [2025-09-24 09:33:41.201] mtd32 attached [2025-09-24 09:33:41.217] ubi0:animations is mounted. [2025-09-24 09:33:41.249] ubi1:textures is mounted. [2025-09-24 09:33:41.249] RTNETLINK answers: File exists [2025-09-24 09:33:41.275] ubi2:dml_code is mounted. [2025-09-24 09:33:41.275] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:33:41.275] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:33:41.309] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:33:41.309] data.LB_FadeInType0=100 [2025-09-24 09:33:41.309] data.CHLH_FadeInType0=0 [2025-09-24 09:33:41.309] data.WU_FadeInDelay=0 [2025-09-24 09:33:41.309] max_time_out=0 [2025-09-24 09:33:41.309] No splash screen [2025-09-24 09:33:41.309] stop dss Done [2025-09-24 09:33:41.309] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:33:41.309] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:33:41.390] /dev/mem opened. [2025-09-24 09:33:41.390] Memory mapped at address 0xffff86f5d000. [2025-09-24 09:33:41.390] Read at address 0x00600018 (0xffff86f5d018): 0x00000000 [2025-09-24 09:33:41.390] Write at address 0x00600018 (0xffff86f5d018): 0x00400040, readback 0x00400040 [2025-09-24 09:33:41.406] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:33:41.439] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:33:41.614] Loaded PowerVR consumer services. [2025-09-24 09:33:41.687] Waiting data available... [2025-09-24 09:33:41.687] 512+0 records in [2025-09-24 09:33:41.687] 512+0 records out [2025-09-24 09:33:41.719] Starting syslogd/klogd: done [2025-09-24 09:33:41.735] DML Start [2025-09-24 09:33:41.912] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:33:42.103] DML res1: 0 [2025-09-24 09:33:42.564] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:33:42.564] Read Success [2025-09-24 09:33:42.564] Verifying certificate... [2025-09-24 09:33:42.771] Verified OK [2025-09-24 09:33:42.787] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:33:44.375] Verified OK [2025-09-24 09:33:44.375] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:33:44.962] Verified OK [2025-09-24 09:33:44.962] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:33:47.775] fs.protected_hardlinks = 1 [2025-09-24 09:33:47.791] fs.protected_symlinks = 1 [2025-09-24 09:33:47.791] kernel.modules_disabled = 1 [2025-09-24 09:33:48.014] [2025-09-24 09:33:48.014] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:33:49.176] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:33:56.866] SBL1:1210.0.1.0 [2025-09-24 09:33:56.914] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:33:58.481] SBL2:1210.0.1.0 [2025-09-24 09:33:58.530] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:33:58.641] j-A [2025-09-24 09:34:05.980] The R5 Autosar Classic is running [2025-09-24 09:34:06.005] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:34:06.005] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:34:06.612] INIT: version 2.96 booting [2025-09-24 09:34:06.724] INIT: Entering runlevel: 5 [2025-09-24 09:34:06.884] mtd24 attached [2025-09-24 09:34:06.900] mtd32 attached [2025-09-24 09:34:06.900] mtd28 attached [2025-09-24 09:34:06.948] ubi0:textures is mounted. [2025-09-24 09:34:07.015] RTNETLINK answers: File exists [2025-09-24 09:34:07.015] ubi2:animations is mounted. [2025-09-24 09:34:07.015] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:34:07.015] ubi1:dml_code is mounted. [2025-09-24 09:34:07.015] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:34:07.015] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:34:07.015] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:34:07.015] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:34:07.015] data.LB_FadeInType0=100 [2025-09-24 09:34:07.015] data.CHLH_FadeInType0=0 [2025-09-24 09:34:07.015] data.WU_FadeInDelay=0 [2025-09-24 09:34:07.015] max_time_out=0 [2025-09-24 09:34:07.015] No splash screen [2025-09-24 09:34:07.015] stop dss Done [2025-09-24 09:34:07.046] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:34:07.046] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:34:07.078] /dev/mem opened. [2025-09-24 09:34:07.078] Memory mapped at address 0xffffb249b000. [2025-09-24 09:34:07.078] Read at address 0x00600018 (0xffffb249b018): 0x00000000 [2025-09-24 09:34:07.078] Write at address 0x00600018 (0xffffb249b018): 0x00400040, readback 0x00400040 [2025-09-24 09:34:07.318] Loaded PowerVR consumer services. [2025-09-24 09:34:07.350] Waiting data available... [2025-09-24 09:34:07.366] 512+0 records in [2025-09-24 09:34:07.366] 512+0 records out [2025-09-24 09:34:07.414] Starting syslogd/klogd: done [2025-09-24 09:34:07.430] DML Start [2025-09-24 09:34:07.638] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:34:07.845] DML res1: 0 [2025-09-24 09:34:08.235] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:34:08.235] Read Success [2025-09-24 09:34:08.235] Verifying certificate... [2025-09-24 09:34:08.507] Verified OK [2025-09-24 09:34:08.523] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:34:10.182] Verified OK [2025-09-24 09:34:10.182] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:34:10.741] Verified OK [2025-09-24 09:34:10.741] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:34:13.411] fs.protected_hardlinks = 1 [2025-09-24 09:34:13.427] fs.protected_symlinks = 1 [2025-09-24 09:34:13.427] kernel.modules_disabled = 1 [2025-09-24 09:34:13.635] [2025-09-24 09:34:13.635] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:34:14.863] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:34:22.587] SBL1:1210.0.1.0 [2025-09-24 09:34:22.619] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:34:24.201] SBL2:1210.0.1.0 [2025-09-24 09:34:24.233] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:34:24.345] j-A [2025-09-24 09:34:31.716] The R5 Autosar Classic is running [2025-09-24 09:34:31.716] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:34:31.716] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:34:32.325] INIT: version 2.96 booting [2025-09-24 09:34:32.436] INIT: Entering runlevel: 5 [2025-09-24 09:34:32.580] mtd32 attached [2025-09-24 09:34:32.596] mtd24 attached [2025-09-24 09:34:32.612] mtd28 attached [2025-09-24 09:34:32.660] RTNETLINK answers: File exists [2025-09-24 09:34:32.660] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:34:32.704] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:34:32.704] ubi0:dml_code is mounted. [2025-09-24 09:34:32.704] ubi1:textures is mounted. [2025-09-24 09:34:32.704] ubi2:animations is mounted. [2025-09-24 09:34:32.704] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:34:32.704] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:34:32.704] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:34:32.704] data.LB_FadeInType0=100 [2025-09-24 09:34:32.725] data.CHLH_FadeInType0=0 [2025-09-24 09:34:32.725] data.WU_FadeInDelay=0 [2025-09-24 09:34:32.725] max_time_out=0 [2025-09-24 09:34:32.725] No splash screen [2025-09-24 09:34:32.725] stop dss Done [2025-09-24 09:34:32.773] /dev/mem opened. [2025-09-24 09:34:32.773] Memory mapped at address 0xffff946b3000. [2025-09-24 09:34:32.810] Read at address 0x00600018 (0xffff946b3018): 0x00000000 [2025-09-24 09:34:32.810] Write at address 0x00600018 (0xffff946b3018): 0x00400040, readback 0x00400040 [2025-09-24 09:34:32.810] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:34:32.810] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:34:33.018] Loaded PowerVR consumer services. [2025-09-24 09:34:33.066] Waiting data available... [2025-09-24 09:34:33.082] 512+0 records in [2025-09-24 09:34:33.082] 512+0 records out [2025-09-24 09:34:33.098] Starting syslogd/klogd: done [2025-09-24 09:34:33.130] DML Start [2025-09-24 09:34:33.290] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:34:33.498] DML res1: 0 [2025-09-24 09:34:33.993] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:34:34.014] Read Success [2025-09-24 09:34:34.014] Verifying certificate... [2025-09-24 09:34:34.254] Verified OK [2025-09-24 09:34:34.270] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:34:35.910] Verified OK [2025-09-24 09:34:35.910] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:34:36.485] Verified OK [2025-09-24 09:34:36.501] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:34:39.091] fs.protected_hardlinks = 1 [2025-09-24 09:34:39.107] fs.protected_symlinks = 1 [2025-09-24 09:34:39.107] kernel.modules_disabled = 1 [2025-09-24 09:34:39.315] [2025-09-24 09:34:39.315] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:34:40.616] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:34:48.305] SBL1:1210.0.1.0 [2025-09-24 09:34:48.337] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:34:49.920] SBL2:1210.0.1.0 [2025-09-24 09:34:49.952] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:34:50.064] j-A [2025-09-24 09:34:57.435] The R5 Autosar Classic is running [2025-09-24 09:34:57.435] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:34:57.435] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:34:58.042] INIT: version 2.96 booting [2025-09-24 09:34:58.154] INIT: Entering runlevel: 5 [2025-09-24 09:34:58.298] mtd24 attached [2025-09-24 09:34:58.314] mtd32 attached [2025-09-24 09:34:58.330] mtd28 attached [2025-09-24 09:34:58.378] ubi0:textures is mounted. [2025-09-24 09:34:58.378] RTNETLINK answers: File exists [2025-09-24 09:34:58.436] ubi1:dml_code is mounted. [2025-09-24 09:34:58.436] ubi2:animations is mounted. [2025-09-24 09:34:58.436] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:34:58.436] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:34:58.436] data.LB_FadeInType0=100 [2025-09-24 09:34:58.436] data.CHLH_FadeInType0=0 [2025-09-24 09:34:58.436] data.WU_FadeInDelay=0 [2025-09-24 09:34:58.436] max_time_out=0 [2025-09-24 09:34:58.436] No splash screen [2025-09-24 09:34:58.436] stop dss Done [2025-09-24 09:34:58.436] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:34:58.436] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:34:58.436] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:34:58.504] /dev/mem opened. [2025-09-24 09:34:58.504] Memory mapped at address 0xffff81336000. [2025-09-24 09:34:58.504] Read at address 0x00600018 (0xffff81336018): 0x00000000 [2025-09-24 09:34:58.504] Write at address 0x00600018 (0xffff81336018): 0x00400040, readback 0x00400040 [2025-09-24 09:34:58.504] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:34:58.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:34:58.664] Loaded PowerVR consumer services. [2025-09-24 09:34:58.777] Waiting data available... [2025-09-24 09:34:58.793] 512+0 records in [2025-09-24 09:34:58.793] 512+0 records out [2025-09-24 09:34:58.824] Starting syslogd/klogd: done [2025-09-24 09:34:58.856] DML Start [2025-09-24 09:34:59.048] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:34:59.272] DML res1: 0 [2025-09-24 09:34:59.686] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:34:59.686] Read Success [2025-09-24 09:34:59.686] Verifying certificate... [2025-09-24 09:34:59.974] Verified OK [2025-09-24 09:34:59.990] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:35:01.645] Verified OK [2025-09-24 09:35:01.645] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:35:02.195] Verified OK [2025-09-24 09:35:02.195] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:35:04.657] fs.protected_hardlinks = 1 [2025-09-24 09:35:04.674] fs.protected_symlinks = 1 [2025-09-24 09:35:04.674] kernel.modules_disabled = 1 [2025-09-24 09:35:04.881] [2025-09-24 09:35:04.881] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:35:06.300] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:35:14.022] SBL1:1210.0.1.0 [2025-09-24 09:35:14.054] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:35:15.638] SBL2:1210.0.1.0 [2025-09-24 09:35:15.670] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:35:15.781] j-A [2025-09-24 09:35:23.154] The R5 Autosar Classic is running [2025-09-24 09:35:23.154] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:35:23.154] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:35:23.761] INIT: version 2.96 booting [2025-09-24 09:35:23.873] INIT: Entering runlevel: 5 [2025-09-24 09:35:24.032] mtd24 attached [2025-09-24 09:35:24.032] mtd28 attached [2025-09-24 09:35:24.048] mtd32 attached [2025-09-24 09:35:24.097] RTNETLINK answers: File exists [2025-09-24 09:35:24.097] ubi1:animations is mounted. [2025-09-24 09:35:24.142] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:35:24.142] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:35:24.142] ubi2:dml_code is mounted. [2025-09-24 09:35:24.142] ubi0:textures is mounted. [2025-09-24 09:35:24.142] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:35:24.142] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:35:24.142] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:35:24.170] data.LB_FadeInType0=100 [2025-09-24 09:35:24.170] data.CHLH_FadeInType0=0 [2025-09-24 09:35:24.170] data.WU_FadeInDelay=0 [2025-09-24 09:35:24.170] max_time_out=0 [2025-09-24 09:35:24.170] No splash screen [2025-09-24 09:35:24.170] stop dss Done [2025-09-24 09:35:24.186] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:35:24.202] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:35:24.241] /dev/mem opened. [2025-09-24 09:35:24.241] Memory mapped at address 0xffff98ff5000. [2025-09-24 09:35:24.241] Read at address 0x00600018 (0xffff98ff5018): 0x00000000 [2025-09-24 09:35:24.241] Write at address 0x00600018 (0xffff98ff5018): 0x00400040, readback 0x00400040 [2025-09-24 09:35:24.433] Loaded PowerVR consumer services. [2025-09-24 09:35:24.543] Waiting data available... [2025-09-24 09:35:24.543] 512+0 records in [2025-09-24 09:35:24.543] 512+0 records out [2025-09-24 09:35:24.559] Starting syslogd/klogd: done [2025-09-24 09:35:24.574] DML Start [2025-09-24 09:35:24.782] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:35:24.990] DML res1: 0 [2025-09-24 09:35:25.342] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:35:25.363] Read Success [2025-09-24 09:35:25.363] Verifying certificate... [2025-09-24 09:35:25.619] Verified OK [2025-09-24 09:35:25.635] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:35:27.292] Verified OK [2025-09-24 09:35:27.292] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:35:27.929] Verified OK [2025-09-24 09:35:27.929] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:35:30.615] fs.protected_hardlinks = 1 [2025-09-24 09:35:30.615] fs.protected_symlinks = 1 [2025-09-24 09:35:30.631] kernel.modules_disabled = 1 [2025-09-24 09:35:30.823] [2025-09-24 09:35:30.823] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:35:32.070] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:35:39.742] SBL1:1210.0.1.0 [2025-09-24 09:35:39.774] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:35:41.357] SBL2:1210.0.1.0 [2025-09-24 09:35:41.388] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:35:41.501] j-A [2025-09-24 09:35:48.855] The R5 Autosar Classic is running [2025-09-24 09:35:48.855] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:35:48.876] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:35:49.483] INIT: version 2.96 booting [2025-09-24 09:35:49.595] INIT: Entering runlevel: 5 [2025-09-24 09:35:49.739] mtd28 attached [2025-09-24 09:35:49.755] mtd24 attached [2025-09-24 09:35:49.771] mtd32 attached [2025-09-24 09:35:49.803] ubi0:animations is mounted. [2025-09-24 09:35:49.819] RTNETLINK answers: File exists [2025-09-24 09:35:49.819] ubi1:textures is mounted. [2025-09-24 09:35:49.875] ubi2:dml_code is mounted. [2025-09-24 09:35:49.875] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:35:49.875] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:35:49.875] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:35:49.875] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:35:49.875] data.LB_FadeInType0=100 [2025-09-24 09:35:49.875] data.CHLH_FadeInType0=0 [2025-09-24 09:35:49.875] data.WU_FadeInDelay=0 [2025-09-24 09:35:49.875] max_time_out=0 [2025-09-24 09:35:49.875] No splash screen [2025-09-24 09:35:49.875] stop dss Done [2025-09-24 09:35:49.875] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:35:49.939] /dev/mem opened. [2025-09-24 09:35:49.939] Memory mapped at address 0xffff99205000. [2025-09-24 09:35:49.939] Read at address 0x00600018 (0xffff99205018): 0x00000000 [2025-09-24 09:35:49.939] Write at address 0x00600018 (0xffff99205018): 0x00400040, readback 0x00400040 [2025-09-24 09:35:49.967] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:35:49.967] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:35:50.095] Loaded PowerVR consumer services. [2025-09-24 09:35:50.222] Waiting data available... [2025-09-24 09:35:50.238] 512+0 records in [2025-09-24 09:35:50.238] 512+0 records out [2025-09-24 09:35:50.254] Starting syslogd/klogd: done [2025-09-24 09:35:50.286] DML Start [2025-09-24 09:35:50.447] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:35:50.670] DML res1: 0 [2025-09-24 09:35:51.118] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:35:51.134] Read Success [2025-09-24 09:35:51.134] Verifying certificate... [2025-09-24 09:35:51.374] Verified OK [2025-09-24 09:35:51.390] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:35:53.046] Verified OK [2025-09-24 09:35:53.046] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:35:53.646] Verified OK [2025-09-24 09:35:53.646] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:35:56.221] fs.protected_hardlinks = 1 [2025-09-24 09:35:56.237] fs.protected_symlinks = 1 [2025-09-24 09:35:56.237] kernel.modules_disabled = 1 [2025-09-24 09:35:56.429] [2025-09-24 09:35:56.429] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:35:57.699] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:36:05.428] SBL1:1210.0.1.0 [2025-09-24 09:36:05.476] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:36:07.043] SBL2:1210.0.1.0 [2025-09-24 09:36:07.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:36:07.186] j-A [2025-09-24 09:36:14.540] The R5 Autosar Classic is running [2025-09-24 09:36:14.565] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:36:14.565] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:36:15.172] INIT: version 2.96 booting [2025-09-24 09:36:15.285] INIT: Entering runlevel: 5 [2025-09-24 09:36:15.444] mtd32 attached [2025-09-24 09:36:15.444] mtd28 attached [2025-09-24 09:36:15.460] mtd24 attached [2025-09-24 09:36:15.508] RTNETLINK answers: File exists [2025-09-24 09:36:15.552] ubi1:animations is mounted. [2025-09-24 09:36:15.552] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:36:15.552] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:36:15.552] ubi0:dml_code is mounted. [2025-09-24 09:36:15.552] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:36:15.552] ubi2:textures is mounted. [2025-09-24 09:36:15.552] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:36:15.552] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:36:15.552] data.LB_FadeInType0=100 [2025-09-24 09:36:15.552] data.CHLH_FadeInType0=0 [2025-09-24 09:36:15.573] data.WU_FadeInDelay=0 [2025-09-24 09:36:15.573] max_time_out=0 [2025-09-24 09:36:15.573] No splash screen [2025-09-24 09:36:15.573] stop dss Done [2025-09-24 09:36:15.647] /dev/mem opened. [2025-09-24 09:36:15.647] Memory mapped at address 0xffff82275000. [2025-09-24 09:36:15.647] Read at address 0x00600018 (0xffff82275018): 0x00000000 [2025-09-24 09:36:15.647] Write at address 0x00600018 (0xffff82275018): 0x00400040, readback 0x00400040 [2025-09-24 09:36:15.647] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:36:15.663] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:36:15.823] Loaded PowerVR consumer services. [2025-09-24 09:36:15.919] Waiting data available... [2025-09-24 09:36:15.934] 512+0 records in [2025-09-24 09:36:15.934] 512+0 records out [2025-09-24 09:36:15.983] Starting syslogd/klogd: done [2025-09-24 09:36:15.999] DML Start [2025-09-24 09:36:16.175] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:36:16.382] DML res1: 0 [2025-09-24 09:36:16.814] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:36:16.835] Read Success [2025-09-24 09:36:16.835] Verifying certificate... [2025-09-24 09:36:17.091] Verified OK [2025-09-24 09:36:17.107] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:36:18.862] Verified OK [2025-09-24 09:36:18.862] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:36:19.406] Verified OK [2025-09-24 09:36:19.422] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:36:21.901] fs.protected_hardlinks = 1 [2025-09-24 09:36:21.901] fs.protected_symlinks = 1 [2025-09-24 09:36:21.917] kernel.modules_disabled = 1 [2025-09-24 09:36:22.108] [2025-09-24 09:36:22.108] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:36:23.468] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:36:31.153] SBL1:1210.0.1.0 [2025-09-24 09:36:31.185] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:36:32.767] SBL2:1210.0.1.0 [2025-09-24 09:36:32.798] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 09:36:32.910] j-A [2025-09-24 09:36:40.263] The R5 Autosar Classic is running [2025-09-24 09:36:40.263] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:36:40.285] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:36:40.892] INIT: version 2.96 booting [2025-09-24 09:36:41.004] INIT: Entering runlevel: 5 [2025-09-24 09:36:41.148] mtd24 attached [2025-09-24 09:36:41.164] mtd32 attached [2025-09-24 09:36:41.164] mtd28 attached [2025-09-24 09:36:41.196] ubi0:textures is mounted. [2025-09-24 09:36:41.274] RTNETLINK answers: File exists [2025-09-24 09:36:41.274] ubi1:dml_code is mounted. [2025-09-24 09:36:41.274] ubi2:animations is mounted. [2025-09-24 09:36:41.274] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:36:41.274] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:36:41.274] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:36:41.274] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:36:41.274] data.LB_FadeInType0=100 [2025-09-24 09:36:41.274] data.CHLH_FadeInType0=0 [2025-09-24 09:36:41.274] data.WU_FadeInDelay=0 [2025-09-24 09:36:41.274] max_time_out=0 [2025-09-24 09:36:41.274] No splash screen [2025-09-24 09:36:41.274] stop dss Done [2025-09-24 09:36:41.274] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:36:41.332] /dev/mem opened. [2025-09-24 09:36:41.332] Memory mapped at address 0xffff825f7000. [2025-09-24 09:36:41.332] Read at address 0x00600018 (0xffff825f7018): 0x00000000 [2025-09-24 09:36:41.332] Write at address 0x00600018 (0xffff825f7018): 0x00400040, readback 0x00400040 [2025-09-24 09:36:41.364] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:36:41.380] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:36:41.588] Loaded PowerVR consumer services. [2025-09-24 09:36:41.620] Waiting data available... [2025-09-24 09:36:41.636] 512+0 records in [2025-09-24 09:36:41.636] 512+0 records out [2025-09-24 09:36:41.668] Starting syslogd/klogd: done [2025-09-24 09:36:41.684] DML Start [2025-09-24 09:36:41.875] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:36:42.115] DML res1: 0 [2025-09-24 09:36:42.435] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:36:42.451] Read Success [2025-09-24 09:36:42.451] Verifying certificate... [2025-09-24 09:36:42.707] Verified OK [2025-09-24 09:36:42.723] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:36:44.379] Verified OK [2025-09-24 09:36:44.379] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:36:45.017] Verified OK [2025-09-24 09:36:45.017] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:36:47.751] fs.protected_hardlinks = 1 [2025-09-24 09:36:47.751] fs.protected_symlinks = 1 [2025-09-24 09:36:47.767] kernel.modules_disabled = 1 [2025-09-24 09:36:47.959] [2025-09-24 09:36:47.959] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:36:49.184] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:36:56.872] SBL1:1210.0.1.0 [2025-09-24 09:36:56.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:36:58.486] SBL2:1210.0.1.0 [2025-09-24 09:36:58.518] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:36:58.630] j-A [2025-09-24 09:37:05.983] The R5 Autosar Classic is running [2025-09-24 09:37:05.983] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:37:06.004] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:37:06.612] INIT: version 2.96 booting [2025-09-24 09:37:06.724] INIT: Entering runlevel: 5 [2025-09-24 09:37:06.884] mtd28 attached [2025-09-24 09:37:06.884] mtd24 attached [2025-09-24 09:37:06.900] mtd32 attached [2025-09-24 09:37:06.972] ubi1:textures is mounted. [2025-09-24 09:37:06.972] RTNETLINK answers: File exists [2025-09-24 09:37:06.972] ubi0:animations is mounted. [2025-09-24 09:37:06.972] ubi2:dml_code is mounted. [2025-09-24 09:37:07.022] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:37:07.022] data.LB_FadeInType0=100 [2025-09-24 09:37:07.022] data.CHLH_FadeInType0=0 [2025-09-24 09:37:07.022] data.WU_FadeInDelay=0 [2025-09-24 09:37:07.022] max_time_out=0 [2025-09-24 09:37:07.022] No splash screen [2025-09-24 09:37:07.022] stop dss Done [2025-09-24 09:37:07.022] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:37:07.022] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:37:07.022] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:37:07.022] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:37:07.073] /dev/mem opened. [2025-09-24 09:37:07.073] Memory mapped at address 0xffff90615000. [2025-09-24 09:37:07.073] Read at address 0x00600018 (0xffff90615018): 0x00000000 [2025-09-24 09:37:07.073] Write at address 0x00600018 (0xffff90615018): 0x00400040, readback 0x00400040 [2025-09-24 09:37:07.120] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:37:07.120] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:37:07.216] Loaded PowerVR consumer services. [2025-09-24 09:37:07.344] Waiting data available... [2025-09-24 09:37:07.360] 512+0 records in [2025-09-24 09:37:07.360] 512+0 records out [2025-09-24 09:37:07.408] Starting syslogd/klogd: done [2025-09-24 09:37:07.424] DML Start [2025-09-24 09:37:07.600] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:37:07.807] DML res1: 0 [2025-09-24 09:37:08.216] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:37:08.216] Read Success [2025-09-24 09:37:08.216] Verifying certificate... [2025-09-24 09:37:08.439] Verified OK [2025-09-24 09:37:08.455] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:37:10.149] Verified OK [2025-09-24 09:37:10.171] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:37:10.795] Verified OK [2025-09-24 09:37:10.811] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:37:13.353] fs.protected_hardlinks = 1 [2025-09-24 09:37:13.353] fs.protected_symlinks = 1 [2025-09-24 09:37:13.369] kernel.modules_disabled = 1 [2025-09-24 09:37:13.560] [2025-09-24 09:37:13.560] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:37:14.839] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:37:22.597] SBL1:1210.0.1.0 [2025-09-24 09:37:22.629] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:37:24.212] SBL2:1210.0.1.0 [2025-09-24 09:37:24.244] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:37:24.356] j-A [2025-09-24 09:37:31.728] The R5 Autosar Classic is running [2025-09-24 09:37:31.728] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:37:31.728] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:37:32.336] INIT: version 2.96 booting [2025-09-24 09:37:32.447] INIT: Entering runlevel: 5 [2025-09-24 09:37:32.591] mtd28 attached [2025-09-24 09:37:32.607] mtd24 attached [2025-09-24 09:37:32.639] ubi0:animations is mounted. [2025-09-24 09:37:32.639] mtd32 attached [2025-09-24 09:37:32.656] ubi1:textures is mounted. [2025-09-24 09:37:32.671] RTNETLINK answers: File exists [2025-09-24 09:37:32.737] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:37:32.737] ubi2:dml_code is mounted. [2025-09-24 09:37:32.737] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:37:32.737] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:37:32.737] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:37:32.737] data.LB_FadeInType0=100 [2025-09-24 09:37:32.737] data.CHLH_FadeInType0=0 [2025-09-24 09:37:32.737] data.WU_FadeInDelay=0 [2025-09-24 09:37:32.737] max_time_out=0 [2025-09-24 09:37:32.737] No splash screen [2025-09-24 09:37:32.737] stop dss Done [2025-09-24 09:37:32.737] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:37:32.769] /dev/mem opened. [2025-09-24 09:37:32.825] Memory mapped at address 0xffffad838000. [2025-09-24 09:37:32.825] Read at address 0x00600018 (0xffffad838018): 0x00000000 [2025-09-24 09:37:32.825] Write at address 0x00600018 (0xffffad838018): 0x00400040, readback 0x00400040 [2025-09-24 09:37:32.825] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:37:32.825] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:37:32.889] Loaded PowerVR consumer services. [2025-09-24 09:37:33.076] Waiting data available... [2025-09-24 09:37:33.076] 512+0 records in [2025-09-24 09:37:33.076] 512+0 records out [2025-09-24 09:37:33.092] Starting syslogd/klogd: done [2025-09-24 09:37:33.108] DML Start [2025-09-24 09:37:33.267] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:37:33.459] DML res1: 0 [2025-09-24 09:37:33.948] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:37:33.948] Read Success [2025-09-24 09:37:33.948] Verifying certificate... [2025-09-24 09:37:34.189] Verified OK [2025-09-24 09:37:34.205] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:37:35.957] Verified OK [2025-09-24 09:37:35.957] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:37:36.532] Verified OK [2025-09-24 09:37:36.532] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:37:39.121] fs.protected_hardlinks = 1 [2025-09-24 09:37:39.121] fs.protected_symlinks = 1 [2025-09-24 09:37:39.138] kernel.modules_disabled = 1 [2025-09-24 09:37:39.330] [2025-09-24 09:37:39.330] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:37:40.525] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:37:48.305] SBL1:1210.0.1.0 [2025-09-24 09:37:48.337] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:37:49.919] SBL2:1210.0.1.0 [2025-09-24 09:37:49.951] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:37:50.063] j-A [2025-09-24 09:37:57.435] The R5 Autosar Classic is running [2025-09-24 09:37:57.435] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:37:57.435] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:37:58.042] INIT: version 2.96 booting [2025-09-24 09:37:58.154] INIT: Entering runlevel: 5 [2025-09-24 09:37:58.298] mtd24 attached [2025-09-24 09:37:58.314] mtd32 attached [2025-09-24 09:37:58.330] mtd28 attached [2025-09-24 09:37:58.378] ubi0:textures is mounted. [2025-09-24 09:37:58.378] RTNETLINK answers: File exists [2025-09-24 09:37:58.415] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:37:58.415] ubi2:animations is mounted. [2025-09-24 09:37:58.415] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:37:58.415] ubi1:dml_code is mounted. [2025-09-24 09:37:58.415] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:37:58.415] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:37:58.415] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:37:58.440] data.LB_FadeInType0=100 [2025-09-24 09:37:58.440] data.CHLH_FadeInType0=0 [2025-09-24 09:37:58.440] data.WU_FadeInDelay=0 [2025-09-24 09:37:58.440] max_time_out=0 [2025-09-24 09:37:58.440] No splash screen [2025-09-24 09:37:58.440] stop dss Done [2025-09-24 09:37:58.456] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:37:58.472] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:37:58.488] /dev/mem opened. [2025-09-24 09:37:58.488] Memory mapped at address 0xffffb76ec000. [2025-09-24 09:37:58.514] Read at address 0x00600018 (0xffffb76ec018): 0x00000000 [2025-09-24 09:37:58.514] Write at address 0x00600018 (0xffffb76ec018): 0x00400040, readback 0x00400040 [2025-09-24 09:37:58.609] Loaded PowerVR consumer services. [2025-09-24 09:37:58.783] Waiting data available... [2025-09-24 09:37:58.783] 512+0 records in [2025-09-24 09:37:58.783] 512+0 records out [2025-09-24 09:37:58.799] Starting syslogd/klogd: done [2025-09-24 09:37:58.815] DML Start [2025-09-24 09:37:58.991] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:37:59.247] DML res1: 0 [2025-09-24 09:37:59.679] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:37:59.679] Read Success [2025-09-24 09:37:59.694] Verifying certificate... [2025-09-24 09:37:59.934] Verified OK [2025-09-24 09:37:59.950] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:38:01.657] Verified OK [2025-09-24 09:38:01.657] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:38:02.321] Verified OK [2025-09-24 09:38:02.321] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:38:04.896] fs.protected_hardlinks = 1 [2025-09-24 09:38:04.912] fs.protected_symlinks = 1 [2025-09-24 09:38:04.927] kernel.modules_disabled = 1 [2025-09-24 09:38:05.103] [2025-09-24 09:38:05.103] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:38:06.318] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:38:14.012] SBL1:1210.0.1.0 [2025-09-24 09:38:14.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:38:15.627] SBL2:1210.0.1.0 [2025-09-24 09:38:15.659] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:38:15.771] j-A [2025-09-24 09:38:23.144] The R5 Autosar Classic is running [2025-09-24 09:38:23.144] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:38:23.144] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:38:23.751] INIT: version 2.96 booting [2025-09-24 09:38:23.864] INIT: Entering runlevel: 5 [2025-09-24 09:38:24.008] mtd24 attached [2025-09-24 09:38:24.024] mtd28 attached [2025-09-24 09:38:24.040] mtd32 attached [2025-09-24 09:38:24.072] ubi0:textures is mounted. [2025-09-24 09:38:24.087] ubi1:animations is mounted. [2025-09-24 09:38:24.087] RTNETLINK answers: File exists [2025-09-24 09:38:24.124] ubi2:dml_code is mounted. [2025-09-24 09:38:24.124] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:38:24.124] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:38:24.124] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:38:24.124] data.LB_FadeInType0=100 [2025-09-24 09:38:24.124] data.CHLH_FadeInType0=0 [2025-09-24 09:38:24.150] data.WU_FadeInDelay=0 [2025-09-24 09:38:24.150] max_time_out=0 [2025-09-24 09:38:24.150] No splash screen [2025-09-24 09:38:24.150] stop dss Done [2025-09-24 09:38:24.150] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:38:24.150] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:38:24.182] /dev/mem opened. [2025-09-24 09:38:24.182] Memory mapped at address 0xffffb5214000. [2025-09-24 09:38:24.215] Read at address 0x00600018 (0xffffb5214018): 0x00000000 [2025-09-24 09:38:24.215] Write at address 0x00600018 (0xffffb5214018): 0x00400040, readback 0x00400040 [2025-09-24 09:38:24.215] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:38:24.231] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:38:24.390] Loaded PowerVR consumer services. [2025-09-24 09:38:24.503] Waiting data available... [2025-09-24 09:38:24.518] 512+0 records in [2025-09-24 09:38:24.518] 512+0 records out [2025-09-24 09:38:24.534] Starting syslogd/klogd: done [2025-09-24 09:38:24.566] DML Start [2025-09-24 09:38:24.757] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:38:24.966] DML res1: 0 [2025-09-24 09:38:25.349] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:38:25.370] Read Success [2025-09-24 09:38:25.370] Verifying certificate... [2025-09-24 09:38:25.610] Verified OK [2025-09-24 09:38:25.626] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:38:27.381] Verified OK [2025-09-24 09:38:27.381] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:38:27.909] Verified OK [2025-09-24 09:38:27.930] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:38:30.440] fs.protected_hardlinks = 1 [2025-09-24 09:38:30.440] fs.protected_symlinks = 1 [2025-09-24 09:38:30.456] kernel.modules_disabled = 1 [2025-09-24 09:38:30.647] [2025-09-24 09:38:30.647] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:38:32.049] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:38:39.730] SBL1:1210.0.1.0 [2025-09-24 09:38:39.762] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:38:41.344] SBL2:1210.0.1.0 [2025-09-24 09:38:41.376] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:38:41.489] j-A [2025-09-24 09:38:48.861] The R5 Autosar Classic is running [2025-09-24 09:38:48.861] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:38:48.861] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:38:49.468] INIT: version 2.96 booting [2025-09-24 09:38:49.581] INIT: Entering runlevel: 5 [2025-09-24 09:38:49.741] mtd32 attached [2025-09-24 09:38:49.741] mtd24 attached [2025-09-24 09:38:49.757] mtd28 attached [2025-09-24 09:38:49.805] ubi0:dml_code is mounted. [2025-09-24 09:38:49.805] RTNETLINK answers: File exists [2025-09-24 09:38:49.866] ubi1:textures is mounted. [2025-09-24 09:38:49.866] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:38:49.866] ubi2:animations is mounted. [2025-09-24 09:38:49.866] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:38:49.866] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:38:49.866] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:38:49.866] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:38:49.866] data.LB_FadeInType0=100 [2025-09-24 09:38:49.866] data.CHLH_FadeInType0=0 [2025-09-24 09:38:49.866] data.WU_FadeInDelay=0 [2025-09-24 09:38:49.866] max_time_out=0 [2025-09-24 09:38:49.866] No splash screen [2025-09-24 09:38:49.866] stop dss Done [2025-09-24 09:38:49.882] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:38:49.898] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:38:49.914] /dev/mem opened. [2025-09-24 09:38:49.914] Memory mapped at address 0xffff95abf000. [2025-09-24 09:38:49.940] Read at address 0x00600018 (0xffff95abf018): 0x00000000 [2025-09-24 09:38:49.940] Write at address 0x00600018 (0xffff95abf018): 0x00400040, readback 0x00400040 [2025-09-24 09:38:50.037] Loaded PowerVR consumer services. [2025-09-24 09:38:50.196] Waiting data available... [2025-09-24 09:38:50.211] 512+0 records in [2025-09-24 09:38:50.211] 512+0 records out [2025-09-24 09:38:50.243] Starting syslogd/klogd: done [2025-09-24 09:38:50.259] DML Start [2025-09-24 09:38:50.420] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:38:50.660] DML res1: 0 [2025-09-24 09:38:51.116] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:38:51.116] Read Success [2025-09-24 09:38:51.116] Verifying certificate... [2025-09-24 09:38:51.371] Verified OK [2025-09-24 09:38:51.387] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:38:53.030] Verified OK [2025-09-24 09:38:53.030] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:38:53.692] Verified OK [2025-09-24 09:38:53.692] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:38:56.297] fs.protected_hardlinks = 1 [2025-09-24 09:38:56.313] fs.protected_symlinks = 1 [2025-09-24 09:38:56.313] kernel.modules_disabled = 1 [2025-09-24 09:38:56.521] [2025-09-24 09:38:56.521] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:38:57.752] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:39:05.436] SBL1:1210.0.1.0 [2025-09-24 09:39:05.467] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:39:07.050] SBL2:1210.0.1.0 [2025-09-24 09:39:07.082] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:39:07.195] j-A [2025-09-24 09:39:14.549] The R5 Autosar Classic is running [2025-09-24 09:39:14.549] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:39:14.569] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:39:15.177] INIT: version 2.96 booting [2025-09-24 09:39:15.288] INIT: Entering runlevel: 5 [2025-09-24 09:39:15.449] mtd24 attached [2025-09-24 09:39:15.449] mtd28 attached [2025-09-24 09:39:15.464] mtd32 attached [2025-09-24 09:39:15.496] ubi0:textures is mounted. [2025-09-24 09:39:15.574] RTNETLINK answers: File exists [2025-09-24 09:39:15.574] ubi1:animations is mounted. [2025-09-24 09:39:15.574] ubi2:dml_code is mounted. [2025-09-24 09:39:15.574] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:39:15.574] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:39:15.574] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:39:15.574] data.LB_FadeInType0=100 [2025-09-24 09:39:15.574] data.CHLH_FadeInType0=0 [2025-09-24 09:39:15.574] data.WU_FadeInDelay=0 [2025-09-24 09:39:15.574] max_time_out=0 [2025-09-24 09:39:15.574] No splash screen [2025-09-24 09:39:15.574] stop dss Done [2025-09-24 09:39:15.574] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:39:15.574] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:39:15.643] /dev/mem opened. [2025-09-24 09:39:15.643] Memory mapped at address 0xffffae616000. [2025-09-24 09:39:15.643] Read at address 0x00600018 (0xffffae616018): 0x00000000 [2025-09-24 09:39:15.643] Write at address 0x00600018 (0xffffae616018): 0x00400040, readback 0x00400040 [2025-09-24 09:39:15.723] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:39:15.723] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:39:15.898] Loaded PowerVR consumer services. [2025-09-24 09:39:15.960] 512+0 records in [2025-09-24 09:39:15.960] 512+0 records out [2025-09-24 09:39:15.960] Waiting data available... [2025-09-24 09:39:15.992] Starting syslogd/klogd: done [2025-09-24 09:39:16.008] DML Start [2025-09-24 09:39:16.184] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:39:16.407] DML res1: 0 [2025-09-24 09:39:16.791] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:39:16.806] Read Success [2025-09-24 09:39:16.806] Verifying certificate... [2025-09-24 09:39:17.031] Verified OK [2025-09-24 09:39:17.046] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:39:18.660] Verified OK [2025-09-24 09:39:18.660] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:39:19.296] Verified OK [2025-09-24 09:39:19.296] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:39:22.013] fs.protected_hardlinks = 1 [2025-09-24 09:39:22.013] fs.protected_symlinks = 1 [2025-09-24 09:39:22.029] kernel.modules_disabled = 1 [2025-09-24 09:39:22.221] [2025-09-24 09:39:22.221] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:39:23.436] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:39:31.157] SBL1:1210.0.1.0 [2025-09-24 09:39:31.189] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:39:32.771] SBL2:1210.0.1.0 [2025-09-24 09:39:32.803] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 09:39:32.915] j-A [2025-09-24 09:39:40.287] The R5 Autosar Classic is running [2025-09-24 09:39:40.287] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:39:40.287] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:39:40.894] INIT: version 2.96 booting [2025-09-24 09:39:41.006] INIT: Entering runlevel: 5 [2025-09-24 09:39:41.166] mtd24 attached [2025-09-24 09:39:41.182] mtd28 attached [2025-09-24 09:39:41.182] mtd32 attached [2025-09-24 09:39:41.230] ubi0:textures is mounted. [2025-09-24 09:39:41.299] RTNETLINK answers: File exists [2025-09-24 09:39:41.299] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:39:41.299] ubi2:dml_code is mounted. [2025-09-24 09:39:41.299] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:39:41.299] ubi1:animations is mounted. [2025-09-24 09:39:41.299] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:39:41.299] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:39:41.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:39:41.299] data.LB_FadeInType0=100 [2025-09-24 09:39:41.299] data.CHLH_FadeInType0=0 [2025-09-24 09:39:41.299] data.WU_FadeInDelay=0 [2025-09-24 09:39:41.299] max_time_out=0 [2025-09-24 09:39:41.299] No splash screen [2025-09-24 09:39:41.299] stop dss Done [2025-09-24 09:39:41.314] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:39:41.330] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:39:41.346] /dev/mem opened. [2025-09-24 09:39:41.346] Memory mapped at address 0xffff8b603000. [2025-09-24 09:39:41.372] Read at address 0x00600018 (0xffff8b603018): 0x00000000 [2025-09-24 09:39:41.372] Write at address 0x00600018 (0xffff8b603018): 0x00400040, readback 0x00400040 [2025-09-24 09:39:41.452] Loaded PowerVR consumer services. [2025-09-24 09:39:41.628] Waiting data available... [2025-09-24 09:39:41.644] 512+0 records in [2025-09-24 09:39:41.644] 512+0 records out [2025-09-24 09:39:41.660] Starting syslogd/klogd: done [2025-09-24 09:39:41.691] DML Start [2025-09-24 09:39:41.884] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:39:42.091] DML res1: 0 [2025-09-24 09:39:42.552] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:39:42.552] Read Success [2025-09-24 09:39:42.552] Verifying certificate... [2025-09-24 09:39:42.775] Verified OK [2025-09-24 09:39:42.791] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:39:44.511] Verified OK [2025-09-24 09:39:44.511] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:39:45.039] Verified OK [2025-09-24 09:39:45.039] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:39:47.548] fs.protected_hardlinks = 1 [2025-09-24 09:39:47.548] fs.protected_symlinks = 1 [2025-09-24 09:39:47.564] kernel.modules_disabled = 1 [2025-09-24 09:39:47.756] [2025-09-24 09:39:47.756] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:39:49.174] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:39:56.843] SBL1:1210.0.1.0 [2025-09-24 09:39:56.875] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:39:58.457] SBL2:1210.0.1.0 [2025-09-24 09:39:58.489] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:39:58.602] j-A [2025-09-24 09:40:05.976] The R5 Autosar Classic is running [2025-09-24 09:40:05.976] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:40:05.976] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:40:06.582] INIT: version 2.96 booting [2025-09-24 09:40:06.695] INIT: Entering runlevel: 5 [2025-09-24 09:40:06.854] mtd32 attached [2025-09-24 09:40:06.870] mtd28 attached [2025-09-24 09:40:06.870] mtd24 attached [2025-09-24 09:40:06.919] ubi0:dml_code is mounted. [2025-09-24 09:40:06.919] RTNETLINK answers: File exists [2025-09-24 09:40:06.979] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:40:06.979] ubi1:animations is mounted. [2025-09-24 09:40:06.979] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:40:06.979] ubi2:textures is mounted. [2025-09-24 09:40:06.979] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:40:06.979] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:40:06.979] data.LB_FadeInType0=100 [2025-09-24 09:40:06.979] data.CHLH_FadeInType0=0 [2025-09-24 09:40:06.979] data.WU_FadeInDelay=0 [2025-09-24 09:40:06.979] max_time_out=0 [2025-09-24 09:40:06.979] No splash screen [2025-09-24 09:40:06.979] stop dss Done [2025-09-24 09:40:06.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:40:07.010] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:40:07.010] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:40:07.042] /dev/mem opened. [2025-09-24 09:40:07.042] Memory mapped at address 0xffffbb993000. [2025-09-24 09:40:07.042] Read at address 0x00600018 (0xffffbb993018): 0x00000000 [2025-09-24 09:40:07.042] Write at address 0x00600018 (0xffffbb993018): 0x00400040, readback 0x00400040 [2025-09-24 09:40:07.138] Loaded PowerVR consumer services. [2025-09-24 09:40:07.314] Waiting data available... [2025-09-24 09:40:07.330] 512+0 records in [2025-09-24 09:40:07.330] 512+0 records out [2025-09-24 09:40:07.378] Starting syslogd/klogd: done [2025-09-24 09:40:07.394] DML Start [2025-09-24 09:40:07.570] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:40:07.762] DML res1: 0 [2025-09-24 09:40:08.251] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:40:08.251] Read Success [2025-09-24 09:40:08.251] Verifying certificate... [2025-09-24 09:40:08.506] Verified OK [2025-09-24 09:40:08.523] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:40:10.238] Verified OK [2025-09-24 09:40:10.238] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:40:10.854] Verified OK [2025-09-24 09:40:10.854] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:40:13.412] fs.protected_hardlinks = 1 [2025-09-24 09:40:13.427] fs.protected_symlinks = 1 [2025-09-24 09:40:13.427] kernel.modules_disabled = 1 [2025-09-24 09:40:13.619] [2025-09-24 09:40:13.619] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:40:14.858] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:40:22.536] SBL1:1210.0.1.0 [2025-09-24 09:40:22.584] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:40:24.151] SBL2:1210.0.1.0 [2025-09-24 09:40:24.182] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:40:24.294] j-A [2025-09-24 09:40:31.649] The R5 Autosar Classic is running [2025-09-24 09:40:31.649] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:40:31.670] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:40:32.278] INIT: version 2.96 booting [2025-09-24 09:40:32.389] INIT: Entering runlevel: 5 [2025-09-24 09:40:32.533] mtd28 attached [2025-09-24 09:40:32.549] mtd32 attached [2025-09-24 09:40:32.565] mtd24 attached [2025-09-24 09:40:32.598] ubi0:animations is mounted. [2025-09-24 09:40:32.670] RTNETLINK answers: File exists [2025-09-24 09:40:32.670] ubi2:textures is mounted. [2025-09-24 09:40:32.670] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:40:32.670] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:40:32.670] ubi1:dml_code is mounted. [2025-09-24 09:40:32.670] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:40:32.670] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:40:32.670] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:40:32.670] data.LB_FadeInType0=100 [2025-09-24 09:40:32.670] data.CHLH_FadeInType0=0 [2025-09-24 09:40:32.670] data.WU_FadeInDelay=0 [2025-09-24 09:40:32.670] max_time_out=0 [2025-09-24 09:40:32.670] No splash screen [2025-09-24 09:40:32.670] stop dss Done [2025-09-24 09:40:32.714] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:40:32.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:40:32.754] /dev/mem opened. [2025-09-24 09:40:32.754] Memory mapped at address 0xffffa3cca000. [2025-09-24 09:40:32.754] Read at address 0x00600018 (0xffffa3cca018): 0x00000000 [2025-09-24 09:40:32.754] Write at address 0x00600018 (0xffffa3cca018): 0x00400040, readback 0x00400040 [2025-09-24 09:40:32.818] Loaded PowerVR consumer services. [2025-09-24 09:40:32.994] Waiting data available... [2025-09-24 09:40:33.010] 512+0 records in [2025-09-24 09:40:33.010] 512+0 records out [2025-09-24 09:40:33.042] Starting syslogd/klogd: done [2025-09-24 09:40:33.058] DML Start [2025-09-24 09:40:33.234] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:40:33.442] DML res1: 0 [2025-09-24 09:40:33.932] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:40:33.932] Read Success [2025-09-24 09:40:33.932] Verifying certificate... [2025-09-24 09:40:34.155] Verified OK [2025-09-24 09:40:34.171] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:40:35.877] Verified OK [2025-09-24 09:40:35.877] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:40:36.529] Verified OK [2025-09-24 09:40:36.529] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:40:39.167] fs.protected_hardlinks = 1 [2025-09-24 09:40:39.182] fs.protected_symlinks = 1 [2025-09-24 09:40:39.182] kernel.modules_disabled = 1 [2025-09-24 09:40:39.375] [2025-09-24 09:40:39.375] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:40:40.510] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:40:48.236] SBL1:1210.0.1.0 [2025-09-24 09:40:48.284] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:40:49.851] SBL2:1210.0.1.0 [2025-09-24 09:40:49.898] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:40:49.994] j-A [2025-09-24 09:40:57.349] The R5 Autosar Classic is running [2025-09-24 09:40:57.370] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:40:57.370] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:40:57.977] INIT: version 2.96 booting [2025-09-24 09:40:58.090] INIT: Entering runlevel: 5 [2025-09-24 09:40:58.233] mtd28 attached [2025-09-24 09:40:58.249] mtd32 attached [2025-09-24 09:40:58.265] mtd24 attached [2025-09-24 09:40:58.313] ubi0:animations is mounted. [2025-09-24 09:40:58.313] RTNETLINK answers: File exists [2025-09-24 09:40:58.377] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:40:58.377] ubi2:textures is mounted. [2025-09-24 09:40:58.377] ubi1:dml_code is mounted. [2025-09-24 09:40:58.377] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:40:58.377] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:40:58.377] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:40:58.377] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:40:58.377] data.LB_FadeInType0=100 [2025-09-24 09:40:58.377] data.CHLH_FadeInType0=0 [2025-09-24 09:40:58.377] data.WU_FadeInDelay=0 [2025-09-24 09:40:58.377] max_time_out=0 [2025-09-24 09:40:58.377] No splash screen [2025-09-24 09:40:58.377] stop dss Done [2025-09-24 09:40:58.447] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:40:58.447] /dev/mem opened. [2025-09-24 09:40:58.447] Memory mapped at address 0xffffb6ca6000. [2025-09-24 09:40:58.447] Read at address 0x00600018 (0xffffb6ca6018): 0x00000000 [2025-09-24 09:40:58.447] Write at address 0x00600018 (0xffffb6ca6018): 0x00400040, readback 0x00400040 [2025-09-24 09:40:58.447] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:40:58.559] Loaded PowerVR consumer services. [2025-09-24 09:40:58.703] Waiting data available... [2025-09-24 09:40:58.719] 512+0 records in [2025-09-24 09:40:58.719] 512+0 records out [2025-09-24 09:40:58.735] Starting syslogd/klogd: done [2025-09-24 09:40:58.767] DML Start [2025-09-24 09:40:58.926] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:40:59.134] DML res1: 0 [2025-09-24 09:40:59.582] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:40:59.598] Read Success [2025-09-24 09:40:59.598] Verifying certificate... [2025-09-24 09:40:59.854] Verified OK [2025-09-24 09:40:59.870] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:41:01.652] Verified OK [2025-09-24 09:41:01.652] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:41:02.228] Verified OK [2025-09-24 09:41:02.228] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:41:04.782] fs.protected_hardlinks = 1 [2025-09-24 09:41:04.782] fs.protected_symlinks = 1 [2025-09-24 09:41:04.782] kernel.modules_disabled = 1 [2025-09-24 09:41:04.974] [2025-09-24 09:41:04.974] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:41:06.262] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:41:13.955] SBL1:1210.0.1.0 [2025-09-24 09:41:13.987] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:41:15.571] SBL2:1210.0.1.0 [2025-09-24 09:41:15.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:41:15.714] j-A [2025-09-24 09:41:23.088] The R5 Autosar Classic is running [2025-09-24 09:41:23.088] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:41:23.088] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:41:23.696] INIT: version 2.96 booting [2025-09-24 09:41:23.807] INIT: Entering runlevel: 5 [2025-09-24 09:41:23.950] mtd24 attached [2025-09-24 09:41:23.966] mtd32 attached [2025-09-24 09:41:23.982] mtd28 attached [2025-09-24 09:41:24.031] RTNETLINK answers: File exists [2025-09-24 09:41:24.095] ubi1:dml_code is mounted. [2025-09-24 09:41:24.095] ubi2:animations is mounted. [2025-09-24 09:41:24.095] ubi0:textures is mounted. [2025-09-24 09:41:24.095] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:41:24.095] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:41:24.095] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:41:24.095] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:41:24.095] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:41:24.095] data.LB_FadeInType0=100 [2025-09-24 09:41:24.095] data.CHLH_FadeInType0=0 [2025-09-24 09:41:24.095] data.WU_FadeInDelay=0 [2025-09-24 09:41:24.095] max_time_out=0 [2025-09-24 09:41:24.095] No splash screen [2025-09-24 09:41:24.095] stop dss Done [2025-09-24 09:41:24.166] /dev/mem opened. [2025-09-24 09:41:24.166] Memory mapped at address 0xffffa0362000. [2025-09-24 09:41:24.166] Read at address 0x00600018 (0xffffa0362018): 0x00000000 [2025-09-24 09:41:24.166] Write at address 0x00600018 (0xffffa0362018): 0x00400040, readback 0x00400040 [2025-09-24 09:41:24.192] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:41:24.192] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:41:24.272] Loaded PowerVR consumer services. [2025-09-24 09:41:24.431] Waiting data available... [2025-09-24 09:41:24.448] 512+0 records in [2025-09-24 09:41:24.448] 512+0 records out [2025-09-24 09:41:24.464] Starting syslogd/klogd: done [2025-09-24 09:41:24.480] DML Start [2025-09-24 09:41:24.655] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:41:24.895] DML res1: 0 [2025-09-24 09:41:25.292] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:41:25.292] Read Success [2025-09-24 09:41:25.292] Verifying certificate... [2025-09-24 09:41:25.595] Verified OK [2025-09-24 09:41:25.611] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:41:27.112] Verified OK [2025-09-24 09:41:27.112] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:41:27.704] Verified OK [2025-09-24 09:41:27.704] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:41:30.468] fs.protected_hardlinks = 1 [2025-09-24 09:41:30.468] fs.protected_symlinks = 1 [2025-09-24 09:41:30.484] kernel.modules_disabled = 1 [2025-09-24 09:41:30.676] [2025-09-24 09:41:30.676] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:41:31.979] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:41:39.666] SBL1:1210.0.1.0 [2025-09-24 09:41:39.714] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:41:41.282] SBL2:1210.0.1.0 [2025-09-24 09:41:41.329] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:41:41.425] j-A [2025-09-24 09:41:48.780] The R5 Autosar Classic is running [2025-09-24 09:41:48.801] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:41:48.801] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:41:49.407] INIT: version 2.96 booting [2025-09-24 09:41:49.520] INIT: Entering runlevel: 5 [2025-09-24 09:41:49.679] mtd32 attached [2025-09-24 09:41:49.679] mtd24 attached [2025-09-24 09:41:49.695] mtd28 attached [2025-09-24 09:41:49.744] RTNETLINK answers: File exists [2025-09-24 09:41:49.744] ubi0:dml_code is mounted. [2025-09-24 09:41:49.808] ubi1:textures is mounted. [2025-09-24 09:41:49.808] ubi2:animations is mounted. [2025-09-24 09:41:49.808] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:41:49.808] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:41:49.808] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:41:49.808] data.LB_FadeInType0=100 [2025-09-24 09:41:49.808] data.CHLH_FadeInType0=0 [2025-09-24 09:41:49.808] data.WU_FadeInDelay=0 [2025-09-24 09:41:49.808] max_time_out=0 [2025-09-24 09:41:49.808] No splash screen [2025-09-24 09:41:49.808] stop dss Done [2025-09-24 09:41:49.808] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:41:49.808] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:41:49.840] /dev/mem opened. [2025-09-24 09:41:49.840] Memory mapped at address 0xffffa143d000. [2025-09-24 09:41:49.866] Read at address 0x00600018 (0xffffa143d018): 0x00000000 [2025-09-24 09:41:49.866] Write at address 0x00600018 (0xffffa143d018): 0x00400040, readback 0x00400040 [2025-09-24 09:41:49.898] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:41:49.914] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:41:49.993] Loaded PowerVR consumer services. [2025-09-24 09:41:50.138] Waiting data available... [2025-09-24 09:41:50.138] 512+0 records in [2025-09-24 09:41:50.138] 512+0 records out [2025-09-24 09:41:50.185] Starting syslogd/klogd: done [2025-09-24 09:41:50.217] DML Start [2025-09-24 09:41:50.393] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:41:50.585] DML res1: 0 [2025-09-24 09:41:51.139] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:41:51.139] Read Success [2025-09-24 09:41:51.139] Verifying certificate... [2025-09-24 09:41:51.379] Verified OK [2025-09-24 09:41:51.395] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:41:53.079] Verified OK [2025-09-24 09:41:53.079] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:41:53.676] Verified OK [2025-09-24 09:41:53.676] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:41:56.298] fs.protected_hardlinks = 1 [2025-09-24 09:41:56.298] fs.protected_symlinks = 1 [2025-09-24 09:41:56.314] kernel.modules_disabled = 1 [2025-09-24 09:41:56.506] [2025-09-24 09:41:56.506] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:41:57.715] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:42:05.365] SBL1:1210.0.1.0 [2025-09-24 09:42:05.413] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:42:06.979] SBL2:1210.0.1.0 [2025-09-24 09:42:07.027] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:42:07.139] j-A [2025-09-24 09:42:14.477] The R5 Autosar Classic is running [2025-09-24 09:42:14.502] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:42:14.502] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:42:15.109] INIT: version 2.96 booting [2025-09-24 09:42:15.221] INIT: Entering runlevel: 5 [2025-09-24 09:42:15.380] mtd32 attached [2025-09-24 09:42:15.396] mtd28 attached [2025-09-24 09:42:15.396] mtd24 attached [2025-09-24 09:42:15.445] ubi0:dml_code is mounted. [2025-09-24 09:42:15.518] RTNETLINK answers: File exists [2025-09-24 09:42:15.518] ubi1:animations is mounted. [2025-09-24 09:42:15.518] ubi2:textures is mounted. [2025-09-24 09:42:15.518] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:42:15.518] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:42:15.518] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:42:15.518] data.LB_FadeInType0=100 [2025-09-24 09:42:15.518] data.CHLH_FadeInType0=0 [2025-09-24 09:42:15.518] data.WU_FadeInDelay=0 [2025-09-24 09:42:15.518] max_time_out=0 [2025-09-24 09:42:15.518] No splash screen [2025-09-24 09:42:15.518] stop dss Done [2025-09-24 09:42:15.518] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:42:15.518] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:42:15.585] /dev/mem opened. [2025-09-24 09:42:15.585] Memory mapped at address 0xffffb5f01000. [2025-09-24 09:42:15.585] Read at address 0x00600018 (0xffffb5f01018): 0x00000000 [2025-09-24 09:42:15.585] Write at address 0x00600018 (0xffffb5f01018): 0x00400040, readback 0x00400040 [2025-09-24 09:42:15.600] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:42:15.616] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:42:15.840] Loaded PowerVR consumer services. [2025-09-24 09:42:15.856] Waiting data available... [2025-09-24 09:42:15.872] 512+0 records in [2025-09-24 09:42:15.872] 512+0 records out [2025-09-24 09:42:15.904] Starting syslogd/klogd: done [2025-09-24 09:42:15.920] DML Start [2025-09-24 09:42:16.097] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:42:16.289] DML res1: 0 [2025-09-24 09:42:16.720] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:42:16.741] Read Success [2025-09-24 09:42:16.741] Verifying certificate... [2025-09-24 09:42:16.964] Verified OK [2025-09-24 09:42:16.980] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:42:18.595] Verified OK [2025-09-24 09:42:18.595] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:42:19.235] Verified OK [2025-09-24 09:42:19.235] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:42:21.922] fs.protected_hardlinks = 1 [2025-09-24 09:42:21.922] fs.protected_symlinks = 1 [2025-09-24 09:42:21.937] kernel.modules_disabled = 1 [2025-09-24 09:42:22.113] [2025-09-24 09:42:22.113] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:42:23.328] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:42:31.067] SBL1:1210.0.1.0 [2025-09-24 09:42:31.115] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:42:32.681] SBL2:1210.0.1.0 [2025-09-24 09:42:32.729] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:42:32.825] j-A [2025-09-24 09:42:40.179] The R5 Autosar Classic is running [2025-09-24 09:42:40.204] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:42:40.204] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:42:40.812] INIT: version 2.96 booting [2025-09-24 09:42:40.923] INIT: Entering runlevel: 5 [2025-09-24 09:42:41.083] mtd28 attached [2025-09-24 09:42:41.083] mtd24 attached [2025-09-24 09:42:41.099] mtd32 attached [2025-09-24 09:42:41.131] ubi0:animations is mounted. [2025-09-24 09:42:41.147] RTNETLINK answers: File exists [2025-09-24 09:42:41.147] ubi1:textures is mounted. [2025-09-24 09:42:41.205] ubi2:dml_code is mounted. [2025-09-24 09:42:41.205] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:42:41.205] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:42:41.205] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:42:41.205] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:42:41.205] data.LB_FadeInType0=100 [2025-09-24 09:42:41.205] data.CHLH_FadeInType0=0 [2025-09-24 09:42:41.205] data.WU_FadeInDelay=0 [2025-09-24 09:42:41.205] max_time_out=0 [2025-09-24 09:42:41.205] No splash screen [2025-09-24 09:42:41.205] stop dss Done [2025-09-24 09:42:41.205] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:42:41.278] /dev/mem opened. [2025-09-24 09:42:41.278] Memory mapped at address 0xffffa7772000. [2025-09-24 09:42:41.278] Read at address 0x00600018 (0xffffa7772018): 0x00000000 [2025-09-24 09:42:41.278] Write at address 0x00600018 (0xffffa7772018): 0x00400040, readback 0x00400040 [2025-09-24 09:42:41.278] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:42:41.278] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:42:41.390] Loaded PowerVR consumer services. [2025-09-24 09:42:41.534] Waiting data available... [2025-09-24 09:42:41.550] 512+0 records in [2025-09-24 09:42:41.550] 512+0 records out [2025-09-24 09:42:41.582] Starting syslogd/klogd: done [2025-09-24 09:42:41.598] DML Start [2025-09-24 09:42:41.773] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:42:41.997] DML res1: 0 [2025-09-24 09:42:42.491] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:42:42.491] Read Success [2025-09-24 09:42:42.491] Verifying certificate... [2025-09-24 09:42:42.730] Verified OK [2025-09-24 09:42:42.746] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:42:44.505] Verified OK [2025-09-24 09:42:44.505] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:42:45.064] Verified OK [2025-09-24 09:42:45.080] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:42:47.559] fs.protected_hardlinks = 1 [2025-09-24 09:42:47.559] fs.protected_symlinks = 1 [2025-09-24 09:42:47.575] kernel.modules_disabled = 1 [2025-09-24 09:42:47.782] [2025-09-24 09:42:47.782] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:42:49.007] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:42:56.775] SBL1:1210.0.1.0 [2025-09-24 09:42:56.823] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:42:58.406] SBL2:1210.0.1.0 [2025-09-24 09:42:58.438] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:42:58.549] j-A [2025-09-24 09:43:05.920] The R5 Autosar Classic is running [2025-09-24 09:43:05.920] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:43:05.920] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:43:06.527] INIT: version 2.96 booting [2025-09-24 09:43:06.639] INIT: Entering runlevel: 5 [2025-09-24 09:43:06.800] mtd32 attached [2025-09-24 09:43:06.800] mtd24 attached [2025-09-24 09:43:06.815] mtd28 attached [2025-09-24 09:43:06.864] ubi0:dml_code is mounted. [2025-09-24 09:43:06.864] RTNETLINK answers: File exists [2025-09-24 09:43:06.898] ubi1:textures is mounted. [2025-09-24 09:43:06.898] ubi2:animations is mounted. [2025-09-24 09:43:06.898] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:43:06.898] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:43:06.898] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:43:06.940] data.LB_FadeInType0=100 [2025-09-24 09:43:06.940] data.CHLH_FadeInType0=0 [2025-09-24 09:43:06.940] data.WU_FadeInDelay=0 [2025-09-24 09:43:06.940] max_time_out=0 [2025-09-24 09:43:06.940] No splash screen [2025-09-24 09:43:06.940] stop dss Done [2025-09-24 09:43:06.940] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:43:06.940] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:43:06.972] /dev/mem opened. [2025-09-24 09:43:06.998] Memory mapped at address 0xffffa25fd000. [2025-09-24 09:43:06.998] Read at address 0x00600018 (0xffffa25fd018): 0x00000000 [2025-09-24 09:43:06.998] Write at address 0x00600018 (0xffffa25fd018): 0x00400040, readback 0x00400040 [2025-09-24 09:43:07.030] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:43:07.046] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:43:07.142] Loaded PowerVR consumer services. [2025-09-24 09:43:07.281] Waiting data available... [2025-09-24 09:43:07.281] 512+0 records in [2025-09-24 09:43:07.281] 512+0 records out [2025-09-24 09:43:07.297] Starting syslogd/klogd: done [2025-09-24 09:43:07.313] DML Start [2025-09-24 09:43:07.473] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:43:07.649] DML res1: 0 [2025-09-24 09:43:08.183] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:43:08.183] Read Success [2025-09-24 09:43:08.183] Verifying certificate... [2025-09-24 09:43:08.423] Verified OK [2025-09-24 09:43:08.439] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:43:10.118] Verified OK [2025-09-24 09:43:10.118] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:43:10.725] Verified OK [2025-09-24 09:43:10.725] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:43:13.428] fs.protected_hardlinks = 1 [2025-09-24 09:43:13.457] fs.protected_symlinks = 1 [2025-09-24 09:43:13.457] kernel.modules_disabled = 1 [2025-09-24 09:43:13.648] [2025-09-24 09:43:13.648] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:43:14.798] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:43:22.493] SBL1:1210.0.1.0 [2025-09-24 09:43:22.541] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:43:24.108] SBL2:1210.0.1.0 [2025-09-24 09:43:24.156] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:43:24.252] j-A [2025-09-24 09:43:31.605] The R5 Autosar Classic is running [2025-09-24 09:43:31.630] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:43:31.630] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:43:32.238] INIT: version 2.96 booting [2025-09-24 09:43:32.349] INIT: Entering runlevel: 5 [2025-09-24 09:43:32.509] mtd32 attached [2025-09-24 09:43:32.509] mtd28 attached [2025-09-24 09:43:32.525] mtd24 attached [2025-09-24 09:43:32.574] RTNETLINK answers: File exists [2025-09-24 09:43:32.574] ubi0:dml_code is mounted. [2025-09-24 09:43:32.642] ubi1:animations is mounted. [2025-09-24 09:43:32.642] ubi2:textures is mounted. [2025-09-24 09:43:32.642] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:43:32.642] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:43:32.642] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:43:32.642] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:43:32.642] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:43:32.642] data.LB_FadeInType0=100 [2025-09-24 09:43:32.642] data.CHLH_FadeInType0=0 [2025-09-24 09:43:32.642] data.WU_FadeInDelay=0 [2025-09-24 09:43:32.642] max_time_out=0 [2025-09-24 09:43:32.642] No splash screen [2025-09-24 09:43:32.642] stop dss Done [2025-09-24 09:43:32.690] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:43:32.727] /dev/mem opened. [2025-09-24 09:43:32.727] Memory mapped at address 0xffffb7324000. [2025-09-24 09:43:32.727] Read at address 0x00600018 (0xffffb7324018): 0x00000000 [2025-09-24 09:43:32.727] Write at address 0x00600018 (0xffffb7324018): 0x00400040, readback 0x00400040 [2025-09-24 09:43:32.727] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:43:32.823] Loaded PowerVR consumer services. [2025-09-24 09:43:32.967] Waiting data available... [2025-09-24 09:43:32.967] 512+0 records in [2025-09-24 09:43:32.983] 512+0 records out [2025-09-24 09:43:32.999] Starting syslogd/klogd: done [2025-09-24 09:43:33.015] DML Start [2025-09-24 09:43:33.206] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:43:33.415] DML res1: 0 [2025-09-24 09:43:33.847] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:43:33.863] Read Success [2025-09-24 09:43:33.863] Verifying certificate... [2025-09-24 09:43:34.102] Verified OK [2025-09-24 09:43:34.118] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:43:35.797] Verified OK [2025-09-24 09:43:35.797] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:43:36.427] Verified OK [2025-09-24 09:43:36.427] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:43:39.016] fs.protected_hardlinks = 1 [2025-09-24 09:43:39.016] fs.protected_symlinks = 1 [2025-09-24 09:43:39.032] kernel.modules_disabled = 1 [2025-09-24 09:43:39.224] [2025-09-24 09:43:39.224] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:43:40.470] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:43:48.186] SBL1:1210.0.1.0 [2025-09-24 09:43:48.217] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:43:49.800] SBL2:1210.0.1.0 [2025-09-24 09:43:49.832] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:43:49.944] j-A [2025-09-24 09:43:57.297] The R5 Autosar Classic is running [2025-09-24 09:43:57.318] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:43:57.318] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:43:57.926] INIT: version 2.96 booting [2025-09-24 09:43:58.037] INIT: Entering runlevel: 5 [2025-09-24 09:43:58.181] mtd24 attached [2025-09-24 09:43:58.213] mtd32 attached [2025-09-24 09:43:58.229] mtd28 attached [2025-09-24 09:43:58.229] ubi0:textures is mounted. [2025-09-24 09:43:58.260] ubi1:dml_code is mounted. [2025-09-24 09:43:58.260] RTNETLINK answers: File exists [2025-09-24 09:43:58.317] ubi2:animations is mounted. [2025-09-24 09:43:58.317] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:43:58.317] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:43:58.317] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:43:58.317] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:43:58.317] data.LB_FadeInType0=100 [2025-09-24 09:43:58.317] data.CHLH_FadeInType0=0 [2025-09-24 09:43:58.317] data.WU_FadeInDelay=0 [2025-09-24 09:43:58.317] max_time_out=0 [2025-09-24 09:43:58.317] No splash screen [2025-09-24 09:43:58.317] stop dss Done [2025-09-24 09:43:58.317] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:43:58.401] /dev/mem opened. [2025-09-24 09:43:58.401] Memory mapped at address 0xffffb979b000. [2025-09-24 09:43:58.401] Read at address 0x00600018 (0xffffb979b018): 0x00000000 [2025-09-24 09:43:58.401] Write at address 0x00600018 (0xffffb979b018): 0x00400040, readback 0x00400040 [2025-09-24 09:43:58.401] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:43:58.401] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:43:58.513] Loaded PowerVR consumer services. [2025-09-24 09:43:58.656] Waiting data available... [2025-09-24 09:43:58.672] 512+0 records in [2025-09-24 09:43:58.672] 512+0 records out [2025-09-24 09:43:58.688] Starting syslogd/klogd: done [2025-09-24 09:43:58.720] DML Start [2025-09-24 09:43:58.865] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:43:59.056] DML res1: 0 [2025-09-24 09:43:59.567] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:43:59.583] Read Success [2025-09-24 09:43:59.583] Verifying certificate... [2025-09-24 09:43:59.840] Verified OK [2025-09-24 09:43:59.856] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:44:01.374] Verified OK [2025-09-24 09:44:01.374] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:44:01.998] Verified OK [2025-09-24 09:44:01.998] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:44:04.588] fs.protected_hardlinks = 1 [2025-09-24 09:44:04.588] fs.protected_symlinks = 1 [2025-09-24 09:44:04.603] kernel.modules_disabled = 1 [2025-09-24 09:44:04.812] [2025-09-24 09:44:04.812] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:44:06.120] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:44:13.907] SBL1:1210.0.1.0 [2025-09-24 09:44:13.955] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:44:15.522] SBL2:1210.0.1.0 [2025-09-24 09:44:15.570] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:44:15.666] j-A [2025-09-24 09:44:23.019] The R5 Autosar Classic is running [2025-09-24 09:44:23.044] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:44:23.044] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:44:23.652] INIT: version 2.96 booting [2025-09-24 09:44:23.764] INIT: Entering runlevel: 5 [2025-09-24 09:44:23.923] mtd32 attached [2025-09-24 09:44:23.923] mtd28 attached [2025-09-24 09:44:23.940] mtd24 attached [2025-09-24 09:44:23.987] RTNETLINK answers: File exists [2025-09-24 09:44:24.053] ubi0:dml_code is mounted. [2025-09-24 09:44:24.053] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:44:24.053] ubi1:animations is mounted. [2025-09-24 09:44:24.053] ubi2:textures is mounted. [2025-09-24 09:44:24.053] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:44:24.053] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:44:24.053] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:44:24.053] data.LB_FadeInType0=100 [2025-09-24 09:44:24.053] data.CHLH_FadeInType0=0 [2025-09-24 09:44:24.053] data.WU_FadeInDelay=0 [2025-09-24 09:44:24.053] max_time_out=0 [2025-09-24 09:44:24.053] No splash screen [2025-09-24 09:44:24.053] stop dss Done [2025-09-24 09:44:24.053] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:44:24.101] /dev/mem opened. [2025-09-24 09:44:24.101] Memory mapped at address 0xffffbb1d4000. [2025-09-24 09:44:24.134] Read at address 0x00600018 (0xffffbb1d4018): 0x00000000 [2025-09-24 09:44:24.134] Write at address 0x00600018 (0xffffbb1d4018): 0x00400040, readback 0x00400040 [2025-09-24 09:44:24.134] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:44:24.134] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:44:24.341] Loaded PowerVR consumer services. [2025-09-24 09:44:24.373] Waiting data available... [2025-09-24 09:44:24.404] 512+0 records in [2025-09-24 09:44:24.405] 512+0 records out [2025-09-24 09:44:24.452] Starting syslogd/klogd: done [2025-09-24 09:44:24.468] DML Start [2025-09-24 09:44:24.660] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:44:24.869] DML res1: 0 [2025-09-24 09:44:25.284] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:44:25.300] Read Success [2025-09-24 09:44:25.300] Verifying certificate... [2025-09-24 09:44:25.524] Verified OK [2025-09-24 09:44:25.540] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:44:27.242] Verified OK [2025-09-24 09:44:27.242] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:44:27.812] Verified OK [2025-09-24 09:44:27.812] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:44:30.546] fs.protected_hardlinks = 1 [2025-09-24 09:44:30.546] fs.protected_symlinks = 1 [2025-09-24 09:44:30.562] kernel.modules_disabled = 1 [2025-09-24 09:44:30.753] [2025-09-24 09:44:30.753] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:44:31.894] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:44:39.619] SBL1:1210.0.1.0 [2025-09-24 09:44:39.667] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:44:41.235] SBL2:1210.0.1.0 [2025-09-24 09:44:41.283] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:44:41.378] j-A [2025-09-24 09:44:48.732] The R5 Autosar Classic is running [2025-09-24 09:44:48.757] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:44:48.757] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:44:49.364] INIT: version 2.96 booting [2025-09-24 09:44:49.475] INIT: Entering runlevel: 5 [2025-09-24 09:44:49.636] mtd28 attached [2025-09-24 09:44:49.636] mtd24 attached [2025-09-24 09:44:49.652] mtd32 attached [2025-09-24 09:44:49.700] ubi0:animations is mounted. [2025-09-24 09:44:49.700] RTNETLINK answers: File exists [2025-09-24 09:44:49.760] ubi1:textures is mounted. [2025-09-24 09:44:49.760] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:44:49.760] ubi2:dml_code is mounted. [2025-09-24 09:44:49.760] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:44:49.760] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:44:49.760] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:44:49.760] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:44:49.760] data.LB_FadeInType0=100 [2025-09-24 09:44:49.760] data.CHLH_FadeInType0=0 [2025-09-24 09:44:49.760] data.WU_FadeInDelay=0 [2025-09-24 09:44:49.760] max_time_out=0 [2025-09-24 09:44:49.760] No splash screen [2025-09-24 09:44:49.760] stop dss Done [2025-09-24 09:44:49.792] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:44:49.837] /dev/mem opened. [2025-09-24 09:44:49.837] Memory mapped at address 0xffffa227b000. [2025-09-24 09:44:49.837] Read at address 0x00600018 (0xffffa227b018): 0x00000000 [2025-09-24 09:44:49.837] Write at address 0x00600018 (0xffffa227b018): 0x00400040, readback 0x00400040 [2025-09-24 09:44:49.837] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:44:49.965] Loaded PowerVR consumer services. [2025-09-24 09:44:50.109] Waiting data available... [2025-09-24 09:44:50.125] 512+0 records in [2025-09-24 09:44:50.125] 512+0 records out [2025-09-24 09:44:50.141] Starting syslogd/klogd: done [2025-09-24 09:44:50.173] DML Start [2025-09-24 09:44:50.381] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:44:50.588] DML res1: 0 [2025-09-24 09:44:50.999] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:44:50.999] Read Success [2025-09-24 09:44:50.999] Verifying certificate... [2025-09-24 09:44:51.254] Verified OK [2025-09-24 09:44:51.271] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:44:52.970] Verified OK [2025-09-24 09:44:52.970] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:44:53.578] Verified OK [2025-09-24 09:44:53.594] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:44:56.232] fs.protected_hardlinks = 1 [2025-09-24 09:44:56.248] fs.protected_symlinks = 1 [2025-09-24 09:44:56.248] kernel.modules_disabled = 1 [2025-09-24 09:44:56.424] [2025-09-24 09:44:56.424] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:44:57.623] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:45:05.309] SBL1:1210.0.1.0 [2025-09-24 09:45:05.357] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:45:06.924] SBL2:1210.0.1.0 [2025-09-24 09:45:06.972] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:45:07.068] j-A [2025-09-24 09:45:14.422] The R5 Autosar Classic is running [2025-09-24 09:45:14.447] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:45:14.447] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:45:15.054] INIT: version 2.96 booting [2025-09-24 09:45:15.166] INIT: Entering runlevel: 5 [2025-09-24 09:45:15.310] mtd24 attached [2025-09-24 09:45:15.325] mtd28 attached [2025-09-24 09:45:15.341] mtd32 attached [2025-09-24 09:45:15.373] ubi0:textures is mounted. [2025-09-24 09:45:15.447] RTNETLINK answers: File exists [2025-09-24 09:45:15.447] ubi1:animations is mounted. [2025-09-24 09:45:15.447] ubi2:dml_code is mounted. [2025-09-24 09:45:15.447] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:45:15.447] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:45:15.447] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:45:15.447] data.LB_FadeInType0=100 [2025-09-24 09:45:15.447] data.CHLH_FadeInType0=0 [2025-09-24 09:45:15.447] data.WU_FadeInDelay=0 [2025-09-24 09:45:15.447] max_time_out=0 [2025-09-24 09:45:15.447] No splash screen [2025-09-24 09:45:15.447] stop dss Done [2025-09-24 09:45:15.447] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:45:15.447] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:45:15.479] /dev/mem opened. [2025-09-24 09:45:15.511] Memory mapped at address 0xffff8527b000. [2025-09-24 09:45:15.511] Read at address 0x00600018 (0xffff8527b018): 0x00000000 [2025-09-24 09:45:15.511] Write at address 0x00600018 (0xffff8527b018): 0x00400040, readback 0x00400040 [2025-09-24 09:45:15.537] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:45:15.537] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:45:15.617] Loaded PowerVR consumer services. [2025-09-24 09:45:15.778] Waiting data available... [2025-09-24 09:45:15.778] 512+0 records in [2025-09-24 09:45:15.794] 512+0 records out [2025-09-24 09:45:15.825] Starting syslogd/klogd: done [2025-09-24 09:45:15.841] DML Start [2025-09-24 09:45:16.017] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:45:16.272] DML res1: 0 [2025-09-24 09:45:16.624] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:45:16.640] Read Success [2025-09-24 09:45:16.640] Verifying certificate... [2025-09-24 09:45:16.928] Verified OK [2025-09-24 09:45:16.960] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:45:18.575] Verified OK [2025-09-24 09:45:18.591] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:45:19.225] Verified OK [2025-09-24 09:45:19.225] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:45:21.798] fs.protected_hardlinks = 1 [2025-09-24 09:45:21.814] fs.protected_symlinks = 1 [2025-09-24 09:45:21.814] kernel.modules_disabled = 1 [2025-09-24 09:45:22.007] [2025-09-24 09:45:22.007] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:45:23.357] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:45:31.023] SBL1:1210.0.1.0 [2025-09-24 09:45:31.055] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:45:32.638] SBL2:1210.0.1.0 [2025-09-24 09:45:32.670] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:45:32.781] j-A [2025-09-24 09:45:40.137] The R5 Autosar Classic is running [2025-09-24 09:45:40.137] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:45:40.158] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:45:40.765] INIT: version 2.96 booting [2025-09-24 09:45:40.876] INIT: Entering runlevel: 5 [2025-09-24 09:45:41.021] mtd28 attached [2025-09-24 09:45:41.037] mtd24 attached [2025-09-24 09:45:41.052] mtd32 attached [2025-09-24 09:45:41.084] ubi0:animations is mounted. [2025-09-24 09:45:41.100] ubi1:textures is mounted. [2025-09-24 09:45:41.100] RTNETLINK answers: File exists [2025-09-24 09:45:41.129] ubi2:dml_code is mounted. [2025-09-24 09:45:41.129] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:45:41.129] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:45:41.164] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:45:41.164] data.LB_FadeInType0=100 [2025-09-24 09:45:41.164] data.CHLH_FadeInType0=0 [2025-09-24 09:45:41.164] data.WU_FadeInDelay=0 [2025-09-24 09:45:41.164] max_time_out=0 [2025-09-24 09:45:41.164] No splash screen [2025-09-24 09:45:41.164] stop dss Done [2025-09-24 09:45:41.164] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:45:41.164] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:45:41.250] /dev/mem opened. [2025-09-24 09:45:41.250] Memory mapped at address 0xffff98434000. [2025-09-24 09:45:41.250] Read at address 0x00600018 (0xffff98434018): 0x00000000 [2025-09-24 09:45:41.250] Write at address 0x00600018 (0xffff98434018): 0x00400040, readback 0x00400040 [2025-09-24 09:45:41.250] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:45:41.250] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:45:41.362] Loaded PowerVR consumer services. [2025-09-24 09:45:41.505] Waiting data available... [2025-09-24 09:45:41.522] 512+0 records in [2025-09-24 09:45:41.522] 512+0 records out [2025-09-24 09:45:41.570] Starting syslogd/klogd: done [2025-09-24 09:45:41.586] DML Start [2025-09-24 09:45:41.777] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:45:41.986] DML res1: 0 [2025-09-24 09:45:42.414] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:45:42.414] Read Success [2025-09-24 09:45:42.414] Verifying certificate... [2025-09-24 09:45:42.638] Verified OK [2025-09-24 09:45:42.654] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:45:44.274] Verified OK [2025-09-24 09:45:44.274] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:45:44.908] Verified OK [2025-09-24 09:45:44.908] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:45:47.481] fs.protected_hardlinks = 1 [2025-09-24 09:45:47.498] fs.protected_symlinks = 1 [2025-09-24 09:45:47.498] kernel.modules_disabled = 1 [2025-09-24 09:45:47.689] [2025-09-24 09:45:47.689] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:45:49.030] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:45:56.730] SBL1:1210.0.1.0 [2025-09-24 09:45:56.778] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:45:58.344] SBL2:1210.0.1.0 [2025-09-24 09:45:58.392] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:45:58.488] j-A [2025-09-24 09:46:05.842] The R5 Autosar Classic is running [2025-09-24 09:46:05.866] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:46:05.866] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:46:06.472] INIT: version 2.96 booting [2025-09-24 09:46:06.585] INIT: Entering runlevel: 5 [2025-09-24 09:46:06.729] mtd28 attached [2025-09-24 09:46:06.744] mtd24 attached [2025-09-24 09:46:06.760] mtd32 attached [2025-09-24 09:46:06.792] ubi0:animations is mounted. [2025-09-24 09:46:06.845] RTNETLINK answers: File exists [2025-09-24 09:46:06.845] ubi1:textures is mounted. [2025-09-24 09:46:06.845] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:46:06.845] ubi2:dml_code is mounted. [2025-09-24 09:46:06.845] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:46:06.845] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:46:06.845] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:46:06.845] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:46:06.868] data.LB_FadeInType0=100 [2025-09-24 09:46:06.868] data.CHLH_FadeInType0=0 [2025-09-24 09:46:06.868] data.WU_FadeInDelay=0 [2025-09-24 09:46:06.868] max_time_out=0 [2025-09-24 09:46:06.868] No splash screen [2025-09-24 09:46:06.868] stop dss Done [2025-09-24 09:46:06.947] /dev/mem opened. [2025-09-24 09:46:06.947] Memory mapped at address 0xffff9f7f9000. [2025-09-24 09:46:06.947] Read at address 0x00600018 (0xffff9f7f9018): 0x00000000 [2025-09-24 09:46:06.947] Write at address 0x00600018 (0xffff9f7f9018): 0x00400040, readback 0x00400040 [2025-09-24 09:46:06.947] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:46:06.947] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:46:07.123] Loaded PowerVR consumer services. [2025-09-24 09:46:07.235] Waiting data available... [2025-09-24 09:46:07.251] 512+0 records in [2025-09-24 09:46:07.251] 512+0 records out [2025-09-24 09:46:07.300] Starting syslogd/klogd: done [2025-09-24 09:46:07.316] DML Start [2025-09-24 09:46:07.507] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:46:07.779] DML res1: 0 [2025-09-24 09:46:08.130] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:46:08.151] Read Success [2025-09-24 09:46:08.151] Verifying certificate... [2025-09-24 09:46:08.439] Verified OK [2025-09-24 09:46:08.455] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:46:10.230] Verified OK [2025-09-24 09:46:10.230] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:46:10.801] Verified OK [2025-09-24 09:46:10.801] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:46:13.327] fs.protected_hardlinks = 1 [2025-09-24 09:46:13.343] fs.protected_symlinks = 1 [2025-09-24 09:46:13.343] kernel.modules_disabled = 1 [2025-09-24 09:46:13.534] [2025-09-24 09:46:13.534] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:46:14.832] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:46:22.444] SBL1:1210.0.1.0 [2025-09-24 09:46:22.476] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:46:24.058] SBL2:1210.0.1.0 [2025-09-24 09:46:24.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:46:24.202] j-A [2025-09-24 09:46:31.577] The R5 Autosar Classic is running [2025-09-24 09:46:31.577] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:46:31.577] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:46:32.184] INIT: version 2.96 booting [2025-09-24 09:46:32.280] INIT: Entering runlevel: 5 [2025-09-24 09:46:32.439] mtd32 attached [2025-09-24 09:46:32.455] mtd24 attached [2025-09-24 09:46:32.455] mtd28 attached [2025-09-24 09:46:32.554] RTNETLINK answers: File exists [2025-09-24 09:46:32.554] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:46:32.554] ubi0:dml_code is mounted. [2025-09-24 09:46:32.554] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:46:32.554] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:46:32.554] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:46:32.554] ubi2:animations is mounted. [2025-09-24 09:46:32.554] ubi1:textures is mounted. [2025-09-24 09:46:32.554] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:46:32.585] data.LB_FadeInType0=100 [2025-09-24 09:46:32.585] data.CHLH_FadeInType0=0 [2025-09-24 09:46:32.585] data.WU_FadeInDelay=0 [2025-09-24 09:46:32.585] max_time_out=0 [2025-09-24 09:46:32.585] No splash screen [2025-09-24 09:46:32.585] stop dss Done [2025-09-24 09:46:32.633] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:46:32.633] /dev/mem opened. [2025-09-24 09:46:32.633] Memory mapped at address 0xffff7f76f000. [2025-09-24 09:46:32.665] Read at address 0x00600018 (0xffff7f76f018): 0x00000000 [2025-09-24 09:46:32.665] Write at address 0x00600018 (0xffff7f76f018): 0x00400040, readback 0x00400040 [2025-09-24 09:46:32.665] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:46:32.825] Loaded PowerVR consumer services. [2025-09-24 09:46:32.936] Waiting data available... [2025-09-24 09:46:32.936] 512+0 records in [2025-09-24 09:46:32.936] 512+0 records out [2025-09-24 09:46:32.984] Starting syslogd/klogd: done [2025-09-24 09:46:33.000] DML Start [2025-09-24 09:46:33.192] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:46:33.464] DML res1: 0 [2025-09-24 09:46:33.816] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:46:33.816] Read Success [2025-09-24 09:46:33.832] Verifying certificate... [2025-09-24 09:46:34.056] Verified OK [2025-09-24 09:46:34.072] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:46:35.844] Verified OK [2025-09-24 09:46:35.844] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:46:36.428] Verified OK [2025-09-24 09:46:36.428] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:46:39.048] fs.protected_hardlinks = 1 [2025-09-24 09:46:39.048] fs.protected_symlinks = 1 [2025-09-24 09:46:39.064] kernel.modules_disabled = 1 [2025-09-24 09:46:39.240] [2025-09-24 09:46:39.240] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:46:40.503] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:46:48.152] SBL1:1210.0.1.0 [2025-09-24 09:46:48.184] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:46:49.767] SBL2:1210.0.1.0 [2025-09-24 09:46:49.799] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:46:49.910] j-A [2025-09-24 09:46:57.282] The R5 Autosar Classic is running [2025-09-24 09:46:57.282] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:46:57.282] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:46:57.889] INIT: version 2.96 booting [2025-09-24 09:46:58.001] INIT: Entering runlevel: 5 [2025-09-24 09:46:58.145] mtd24 attached [2025-09-24 09:46:58.161] mtd32 attached [2025-09-24 09:46:58.177] mtd28 attached [2025-09-24 09:46:58.193] ubi0:textures is mounted. [2025-09-24 09:46:58.258] RTNETLINK answers: File exists [2025-09-24 09:46:58.258] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:46:58.258] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:46:58.258] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:46:58.258] ubi1:dml_code is mounted. [2025-09-24 09:46:58.258] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:46:58.258] ubi2:animations is mounted. [2025-09-24 09:46:58.258] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:46:58.286] data.LB_FadeInType0=100 [2025-09-24 09:46:58.286] data.CHLH_FadeInType0=0 [2025-09-24 09:46:58.286] data.WU_FadeInDelay=0 [2025-09-24 09:46:58.286] max_time_out=0 [2025-09-24 09:46:58.286] No splash screen [2025-09-24 09:46:58.286] stop dss Done [2025-09-24 09:46:58.334] /dev/mem opened. [2025-09-24 09:46:58.334] Memory mapped at address 0xffff8cd47000. [2025-09-24 09:46:58.371] Read at address 0x00600018 (0xffff8cd47018): 0x00000000 [2025-09-24 09:46:58.371] Write at address 0x00600018 (0xffff8cd47018): 0x00400040, readback 0x00400040 [2025-09-24 09:46:58.371] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:46:58.371] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:46:58.579] Loaded PowerVR consumer services. [2025-09-24 09:46:58.643] Waiting data available... [2025-09-24 09:46:58.659] 512+0 records in [2025-09-24 09:46:58.659] 512+0 records out [2025-09-24 09:46:58.691] Starting syslogd/klogd: done [2025-09-24 09:46:58.707] DML Start [2025-09-24 09:46:58.851] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:46:59.122] DML res1: 0 [2025-09-24 09:46:59.518] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:46:59.518] Read Success [2025-09-24 09:46:59.518] Verifying certificate... [2025-09-24 09:46:59.758] Verified OK [2025-09-24 09:46:59.774] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:47:01.431] Verified OK [2025-09-24 09:47:01.431] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:47:02.006] Verified OK [2025-09-24 09:47:02.006] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:47:04.676] fs.protected_hardlinks = 1 [2025-09-24 09:47:04.692] fs.protected_symlinks = 1 [2025-09-24 09:47:04.692] kernel.modules_disabled = 1 [2025-09-24 09:47:04.883] [2025-09-24 09:47:04.883] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:47:06.130] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:47:08.443] SBL1:1210.0.1.0 [2025-09-24 09:47:13.893] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:47:15.461] SBL2:1210.0.1.0 [2025-09-24 09:47:15.509] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:47:15.605] j-A [2025-09-24 09:47:22.960] The R5 Autosar Classic is running [2025-09-24 09:47:22.982] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:47:22.982] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:47:23.589] INIT: version 2.96 booting [2025-09-24 09:47:23.701] INIT: Entering runlevel: 5 [2025-09-24 09:47:23.844] mtd24 attached [2025-09-24 09:47:23.860] mtd28 attached [2025-09-24 09:47:23.876] mtd32 attached [2025-09-24 09:47:23.893] ubi0:textures is mounted. [2025-09-24 09:47:23.925] RTNETLINK answers: File exists [2025-09-24 09:47:23.925] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:47:23.959] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:47:23.959] ubi2:dml_code is mounted. [2025-09-24 09:47:23.959] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:47:23.959] ubi1:animations is mounted. [2025-09-24 09:47:23.959] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:47:23.959] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:47:23.987] data.LB_FadeInType0=100 [2025-09-24 09:47:23.987] data.CHLH_FadeInType0=0 [2025-09-24 09:47:23.987] data.WU_FadeInDelay=0 [2025-09-24 09:47:23.987] max_time_out=0 [2025-09-24 09:47:23.987] No splash screen [2025-09-24 09:47:23.987] stop dss Done [2025-09-24 09:47:24.011] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:47:24.011] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:47:24.065] /dev/mem opened. [2025-09-24 09:47:24.065] Memory mapped at address 0xffffb88c8000. [2025-09-24 09:47:24.065] Read at address 0x00600018 (0xffffb88c8018): 0x00000000 [2025-09-24 09:47:24.065] Write at address 0x00600018 (0xffffb88c8018): 0x00400040, readback 0x00400040 [2025-09-24 09:47:24.273] Loaded PowerVR consumer services. [2025-09-24 09:47:24.321] Waiting data available... [2025-09-24 09:47:24.337] 512+0 records in [2025-09-24 09:47:24.337] 512+0 records out [2025-09-24 09:47:24.369] Starting syslogd/klogd: done [2025-09-24 09:47:24.385] DML Start [2025-09-24 09:47:24.593] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:47:24.834] DML res1: 0 [2025-09-24 09:47:25.191] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:47:25.191] Read Success [2025-09-24 09:47:25.191] Verifying certificate... [2025-09-24 09:47:25.463] Verified OK [2025-09-24 09:47:25.478] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:47:27.056] Verified OK [2025-09-24 09:47:27.056] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:47:27.670] Verified OK [2025-09-24 09:47:27.670] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:47:30.339] fs.protected_hardlinks = 1 [2025-09-24 09:47:30.355] fs.protected_symlinks = 1 [2025-09-24 09:47:30.355] kernel.modules_disabled = 1 [2025-09-24 09:47:30.547] [2025-09-24 09:47:30.547] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:47:31.915] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:47:39.541] SBL1:1210.0.1.0 [2025-09-24 09:47:39.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:47:41.156] SBL2:1210.0.1.0 [2025-09-24 09:47:41.204] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:47:41.300] j-A [2025-09-24 09:47:48.654] The R5 Autosar Classic is running [2025-09-24 09:47:48.678] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:47:48.678] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:47:49.285] INIT: version 2.96 booting [2025-09-24 09:47:49.397] INIT: Entering runlevel: 5 [2025-09-24 09:47:49.557] mtd24 attached [2025-09-24 09:47:49.557] mtd28 attached [2025-09-24 09:47:49.590] mtd32 attached [2025-09-24 09:47:49.622] ubi1:animations is mounted. [2025-09-24 09:47:49.691] ubi0:textures is mounted. [2025-09-24 09:47:49.691] RTNETLINK answers: File exists [2025-09-24 09:47:49.691] ubi2:dml_code is mounted. [2025-09-24 09:47:49.691] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:47:49.691] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:47:49.691] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:47:49.691] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:47:49.691] data.LB_FadeInType0=100 [2025-09-24 09:47:49.691] data.CHLH_FadeInType0=0 [2025-09-24 09:47:49.691] data.WU_FadeInDelay=0 [2025-09-24 09:47:49.691] max_time_out=0 [2025-09-24 09:47:49.691] No splash screen [2025-09-24 09:47:49.691] stop dss Done [2025-09-24 09:47:49.691] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:47:49.722] /dev/mem opened. [2025-09-24 09:47:49.722] Memory mapped at address 0xffffb74eb000. [2025-09-24 09:47:49.756] Read at address 0x00600018 (0xffffb74eb018): 0x00000000 [2025-09-24 09:47:49.756] Write at address 0x00600018 (0xffffb74eb018): 0x00400040, readback 0x00400040 [2025-09-24 09:47:49.756] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:47:49.772] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:47:50.039] Loaded PowerVR consumer services. [2025-09-24 09:47:50.039] Waiting data available... [2025-09-24 09:47:50.055] 512+0 records in [2025-09-24 09:47:50.055] 512+0 records out [2025-09-24 09:47:50.087] Starting syslogd/klogd: done [2025-09-24 09:47:50.103] DML Start [2025-09-24 09:47:50.263] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:47:50.487] DML res1: 0 [2025-09-24 09:47:50.964] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:47:50.964] Read Success [2025-09-24 09:47:50.964] Verifying certificate... [2025-09-24 09:47:51.219] Verified OK [2025-09-24 09:47:51.235] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:47:52.831] Verified OK [2025-09-24 09:47:52.831] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:47:53.464] Verified OK [2025-09-24 09:47:53.464] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:47:55.942] fs.protected_hardlinks = 1 [2025-09-24 09:47:55.942] fs.protected_symlinks = 1 [2025-09-24 09:47:55.958] kernel.modules_disabled = 1 [2025-09-24 09:47:56.151] [2025-09-24 09:47:56.151] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:47:57.552] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:48:05.269] SBL1:1210.0.1.0 [2025-09-24 09:48:05.301] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:48:06.883] SBL2:1210.0.1.0 [2025-09-24 09:48:06.915] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:48:07.027] j-A [2025-09-24 09:48:14.399] The R5 Autosar Classic is running [2025-09-24 09:48:14.399] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:48:14.399] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:48:15.006] INIT: version 2.96 booting [2025-09-24 09:48:15.118] INIT: Entering runlevel: 5 [2025-09-24 09:48:15.278] mtd24 attached [2025-09-24 09:48:15.278] mtd32 attached [2025-09-24 09:48:15.294] mtd28 attached [2025-09-24 09:48:15.325] ubi0:textures is mounted. [2025-09-24 09:48:15.341] RTNETLINK answers: File exists [2025-09-24 09:48:15.380] ubi1:dml_code is mounted. [2025-09-24 09:48:15.380] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:48:15.380] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:48:15.380] ubi2:animations is mounted. [2025-09-24 09:48:15.380] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:48:15.380] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:48:15.380] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:48:15.404] data.LB_FadeInType0=100 [2025-09-24 09:48:15.404] data.CHLH_FadeInType0=0 [2025-09-24 09:48:15.404] data.WU_FadeInDelay=0 [2025-09-24 09:48:15.404] max_time_out=0 [2025-09-24 09:48:15.404] No splash screen [2025-09-24 09:48:15.404] stop dss Done [2025-09-24 09:48:15.475] /dev/mem opened. [2025-09-24 09:48:15.475] Memory mapped at address 0xffff840a8000. [2025-09-24 09:48:15.475] Read at address 0x00600018 (0xffff840a8018): 0x00000000 [2025-09-24 09:48:15.475] Write at address 0x00600018 (0xffff840a8018): 0x00400040, readback 0x00400040 [2025-09-24 09:48:15.475] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:48:15.475] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:48:15.602] Loaded PowerVR consumer services. [2025-09-24 09:48:15.731] Waiting data available... [2025-09-24 09:48:15.747] 512+0 records in [2025-09-24 09:48:15.747] 512+0 records out [2025-09-24 09:48:15.779] Starting syslogd/klogd: done [2025-09-24 09:48:15.795] DML Start [2025-09-24 09:48:15.986] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:48:16.194] DML res1: 0 [2025-09-24 09:48:16.607] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:48:16.607] Read Success [2025-09-24 09:48:16.607] Verifying certificate... [2025-09-24 09:48:16.815] Verified OK [2025-09-24 09:48:16.831] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:48:18.439] Verified OK [2025-09-24 09:48:18.439] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:48:19.057] Verified OK [2025-09-24 09:48:19.057] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:48:21.759] fs.protected_hardlinks = 1 [2025-09-24 09:48:21.775] fs.protected_symlinks = 1 [2025-09-24 09:48:21.775] kernel.modules_disabled = 1 [2025-09-24 09:48:21.967] [2025-09-24 09:48:21.967] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:48:23.224] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:48:30.962] SBL1:1210.0.1.0 [2025-09-24 09:48:31.009] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:48:32.577] SBL2:1210.0.1.0 [2025-09-24 09:48:32.624] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:48:32.720] j-A [2025-09-24 09:48:40.074] The R5 Autosar Classic is running [2025-09-24 09:48:40.096] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:48:40.096] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:48:40.703] INIT: version 2.96 booting [2025-09-24 09:48:40.816] INIT: Entering runlevel: 5 [2025-09-24 09:48:40.976] mtd24 attached [2025-09-24 09:48:40.976] mtd28 attached [2025-09-24 09:48:40.992] mtd32 attached [2025-09-24 09:48:41.039] ubi1:animations is mounted. [2025-09-24 09:48:41.039] ubi0:textures is mounted. [2025-09-24 09:48:41.055] RTNETLINK answers: File exists [2025-09-24 09:48:41.055] ubi2:dml_code is mounted. [2025-09-24 09:48:41.109] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:48:41.109] data.LB_FadeInType0=100 [2025-09-24 09:48:41.109] data.CHLH_FadeInType0=0 [2025-09-24 09:48:41.109] data.WU_FadeInDelay=0 [2025-09-24 09:48:41.109] max_time_out=0 [2025-09-24 09:48:41.109] No splash screen [2025-09-24 09:48:41.109] stop dss Done [2025-09-24 09:48:41.109] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:48:41.109] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:48:41.109] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:48:41.125] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:48:41.158] /dev/mem opened. [2025-09-24 09:48:41.158] Memory mapped at address 0xffff93e39000. [2025-09-24 09:48:41.158] Read at address 0x00600018 (0xffff93e39018): 0x00000000 [2025-09-24 09:48:41.158] Write at address 0x00600018 (0xffff93e39018): 0x00400040, readback 0x00400040 [2025-09-24 09:48:41.222] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:48:41.238] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:48:41.430] Loaded PowerVR consumer services. [2025-09-24 09:48:41.462] Waiting data available... [2025-09-24 09:48:41.494] 512+0 records in [2025-09-24 09:48:41.494] 512+0 records out [2025-09-24 09:48:41.526] Starting syslogd/klogd: done [2025-09-24 09:48:41.526] DML Start [2025-09-24 09:48:41.686] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:48:41.893] DML res1: 0 [2025-09-24 09:48:42.454] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:48:42.454] Read Success [2025-09-24 09:48:42.469] Verifying certificate... [2025-09-24 09:48:42.757] Verified OK [2025-09-24 09:48:42.773] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:48:44.433] Verified OK [2025-09-24 09:48:44.433] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:48:44.975] Verified OK [2025-09-24 09:48:44.975] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:48:47.596] fs.protected_hardlinks = 1 [2025-09-24 09:48:47.596] fs.protected_symlinks = 1 [2025-09-24 09:48:47.613] kernel.modules_disabled = 1 [2025-09-24 09:48:47.804] [2025-09-24 09:48:47.804] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:48:49.064] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:48:56.671] SBL1:1210.0.1.0 [2025-09-24 09:48:56.702] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:48:58.286] SBL2:1210.0.1.0 [2025-09-24 09:48:58.318] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:48:58.429] j-A [2025-09-24 09:49:05.803] The R5 Autosar Classic is running [2025-09-24 09:49:05.803] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:49:05.803] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:49:06.410] INIT: version 2.96 booting [2025-09-24 09:49:06.522] INIT: Entering runlevel: 5 [2025-09-24 09:49:06.666] mtd24 attached [2025-09-24 09:49:06.682] mtd32 attached [2025-09-24 09:49:06.698] mtd28 attached [2025-09-24 09:49:06.714] ubi0:textures is mounted. [2025-09-24 09:49:06.746] RTNETLINK answers: File exists [2025-09-24 09:49:06.746] ubi1:dml_code is mounted. [2025-09-24 09:49:06.778] ubi2:animations is mounted. [2025-09-24 09:49:06.778] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:49:06.778] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:49:06.778] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:49:06.778] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:49:06.810] data.LB_FadeInType0=100 [2025-09-24 09:49:06.810] data.CHLH_FadeInType0=0 [2025-09-24 09:49:06.810] data.WU_FadeInDelay=0 [2025-09-24 09:49:06.810] max_time_out=0 [2025-09-24 09:49:06.810] No splash screen [2025-09-24 09:49:06.810] stop dss Done [2025-09-24 09:49:06.810] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:49:06.881] /dev/mem opened. [2025-09-24 09:49:06.881] Memory mapped at address 0xffff8db8d000. [2025-09-24 09:49:06.881] Read at address 0x00600018 (0xffff8db8d018): 0x00000000 [2025-09-24 09:49:06.881] Write at address 0x00600018 (0xffff8db8d018): 0x00400040, readback 0x00400040 [2025-09-24 09:49:06.881] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:49:06.881] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:49:07.120] Loaded PowerVR consumer services. [2025-09-24 09:49:07.168] Waiting data available... [2025-09-24 09:49:07.168] 512+0 records in [2025-09-24 09:49:07.184] 512+0 records out [2025-09-24 09:49:07.216] Starting syslogd/klogd: done [2025-09-24 09:49:07.232] DML Start [2025-09-24 09:49:07.424] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:49:07.648] DML res1: 0 [2025-09-24 09:49:08.086] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:49:08.086] Read Success [2025-09-24 09:49:08.086] Verifying certificate... [2025-09-24 09:49:08.309] Verified OK [2025-09-24 09:49:08.325] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:49:09.892] Verified OK [2025-09-24 09:49:09.892] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:49:10.531] Verified OK [2025-09-24 09:49:10.531] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:49:13.230] fs.protected_hardlinks = 1 [2025-09-24 09:49:13.230] fs.protected_symlinks = 1 [2025-09-24 09:49:13.230] kernel.modules_disabled = 1 [2025-09-24 09:49:13.406] [2025-09-24 09:49:13.406] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:49:14.717] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:49:22.357] SBL1:1210.0.1.0 [2025-09-24 09:49:22.405] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:49:23.971] SBL2:1210.0.1.0 [2025-09-24 09:49:24.019] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:49:24.132] j-A [2025-09-24 09:49:31.500] The R5 Autosar Classic is running [2025-09-24 09:49:31.500] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:49:31.500] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:49:32.109] INIT: version 2.96 booting [2025-09-24 09:49:32.220] INIT: Entering runlevel: 5 [2025-09-24 09:49:32.364] mtd32 attached [2025-09-24 09:49:32.380] mtd28 attached [2025-09-24 09:49:32.380] mtd24 attached [2025-09-24 09:49:32.477] RTNETLINK answers: File exists [2025-09-24 09:49:32.477] ubi0:dml_code is mounted. [2025-09-24 09:49:32.477] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:49:32.477] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:49:32.477] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:49:32.477] ubi1:animations is mounted. [2025-09-24 09:49:32.477] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:49:32.477] ubi2:textures is mounted. [2025-09-24 09:49:32.477] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:49:32.505] data.LB_FadeInType0=100 [2025-09-24 09:49:32.505] data.CHLH_FadeInType0=0 [2025-09-24 09:49:32.505] data.WU_FadeInDelay=0 [2025-09-24 09:49:32.505] max_time_out=0 [2025-09-24 09:49:32.505] No splash screen [2025-09-24 09:49:32.505] stop dss Done [2025-09-24 09:49:32.521] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:49:32.537] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:49:32.601] /dev/mem opened. [2025-09-24 09:49:32.601] Memory mapped at address 0xffffb2cdc000. [2025-09-24 09:49:32.601] Read at address 0x00600018 (0xffffb2cdc018): 0x00000000 [2025-09-24 09:49:32.601] Write at address 0x00600018 (0xffffb2cdc018): 0x00400040, readback 0x00400040 [2025-09-24 09:49:32.665] Loaded PowerVR consumer services. [2025-09-24 09:49:32.855] Waiting data available... [2025-09-24 09:49:32.855] 512+0 records in [2025-09-24 09:49:32.855] 512+0 records out [2025-09-24 09:49:32.870] Starting syslogd/klogd: done [2025-09-24 09:49:32.886] DML Start [2025-09-24 09:49:33.063] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:49:33.270] DML res1: 0 [2025-09-24 09:49:33.728] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:49:33.728] Read Success [2025-09-24 09:49:33.728] Verifying certificate... [2025-09-24 09:49:33.984] Verified OK [2025-09-24 09:49:34.000] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:49:35.629] Verified OK [2025-09-24 09:49:35.629] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:49:36.252] Verified OK [2025-09-24 09:49:36.252] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:49:38.938] fs.protected_hardlinks = 1 [2025-09-24 09:49:38.954] fs.protected_symlinks = 1 [2025-09-24 09:49:38.954] kernel.modules_disabled = 1 [2025-09-24 09:49:39.146] [2025-09-24 09:49:39.146] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:49:40.345] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:49:48.071] SBL1:1210.0.1.0 [2025-09-24 09:49:48.103] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:49:49.686] SBL2:1210.0.1.0 [2025-09-24 09:49:49.718] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:49:49.829] j-A [2025-09-24 09:49:57.202] The R5 Autosar Classic is running [2025-09-24 09:49:57.202] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:49:57.202] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:49:57.809] INIT: version 2.96 booting [2025-09-24 09:49:57.921] INIT: Entering runlevel: 5 [2025-09-24 09:49:58.065] mtd24 attached [2025-09-24 09:49:58.081] mtd32 attached [2025-09-24 09:49:58.097] mtd28 attached [2025-09-24 09:49:58.113] ubi0:textures is mounted. [2025-09-24 09:49:58.145] RTNETLINK answers: File exists [2025-09-24 09:49:58.145] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:49:58.199] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:49:58.199] ubi1:dml_code is mounted. [2025-09-24 09:49:58.199] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:49:58.199] ubi2:animations is mounted. [2025-09-24 09:49:58.199] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:49:58.199] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:49:58.199] data.LB_FadeInType0=100 [2025-09-24 09:49:58.199] data.CHLH_FadeInType0=0 [2025-09-24 09:49:58.199] data.WU_FadeInDelay=0 [2025-09-24 09:49:58.199] max_time_out=0 [2025-09-24 09:49:58.199] No splash screen [2025-09-24 09:49:58.199] stop dss Done [2025-09-24 09:49:58.246] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:49:58.280] /dev/mem opened. [2025-09-24 09:49:58.280] Memory mapped at address 0xffffa19fe000. [2025-09-24 09:49:58.280] Read at address 0x00600018 (0xffffa19fe018): 0x00000000 [2025-09-24 09:49:58.280] Write at address 0x00600018 (0xffffa19fe018): 0x00400040, readback 0x00400040 [2025-09-24 09:49:58.280] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:49:58.408] Loaded PowerVR consumer services. [2025-09-24 09:49:58.536] Waiting data available... [2025-09-24 09:49:58.552] 512+0 records in [2025-09-24 09:49:58.552] 512+0 records out [2025-09-24 09:49:58.600] Starting syslogd/klogd: done [2025-09-24 09:49:58.616] DML Start [2025-09-24 09:49:58.823] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:49:58.999] DML res1: 0 [2025-09-24 09:49:59.447] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:49:59.468] Read Success [2025-09-24 09:49:59.468] Verifying certificate... [2025-09-24 09:49:59.739] Verified OK [2025-09-24 09:49:59.755] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:50:01.434] Verified OK [2025-09-24 09:50:01.450] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:50:02.011] Verified OK [2025-09-24 09:50:02.011] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:50:04.536] fs.protected_hardlinks = 1 [2025-09-24 09:50:04.536] fs.protected_symlinks = 1 [2025-09-24 09:50:04.552] kernel.modules_disabled = 1 [2025-09-24 09:50:04.744] [2025-09-24 09:50:04.744] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:50:06.035] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:50:13.803] SBL1:1210.0.1.0 [2025-09-24 09:50:13.834] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:50:15.417] SBL2:1210.0.1.0 [2025-09-24 09:50:15.449] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:50:15.562] j-A [2025-09-24 09:50:22.936] The R5 Autosar Classic is running [2025-09-24 09:50:22.936] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:50:22.936] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:50:23.543] INIT: version 2.96 booting [2025-09-24 09:50:23.655] INIT: Entering runlevel: 5 [2025-09-24 09:50:23.798] mtd28 attached [2025-09-24 09:50:23.814] mtd24 attached [2025-09-24 09:50:23.830] mtd32 attached [2025-09-24 09:50:23.878] RTNETLINK answers: File exists [2025-09-24 09:50:23.878] ubi0:animations is mounted. [2025-09-24 09:50:23.933] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:50:23.933] ubi1:textures is mounted. [2025-09-24 09:50:23.933] ubi2:dml_code is mounted. [2025-09-24 09:50:23.933] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:50:23.933] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:50:23.933] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:50:23.933] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:50:23.933] data.LB_FadeInType0=100 [2025-09-24 09:50:23.933] data.CHLH_FadeInType0=0 [2025-09-24 09:50:23.933] data.WU_FadeInDelay=0 [2025-09-24 09:50:23.933] max_time_out=0 [2025-09-24 09:50:23.933] No splash screen [2025-09-24 09:50:23.933] stop dss Done [2025-09-24 09:50:23.976] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:50:23.976] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:50:24.014] /dev/mem opened. [2025-09-24 09:50:24.014] Memory mapped at address 0xffff82f73000. [2025-09-24 09:50:24.014] Read at address 0x00600018 (0xffff82f73018): 0x00000000 [2025-09-24 09:50:24.014] Write at address 0x00600018 (0xffff82f73018): 0x00400040, readback 0x00400040 [2025-09-24 09:50:24.110] Loaded PowerVR consumer services. [2025-09-24 09:50:24.270] Waiting data available... [2025-09-24 09:50:24.285] 512+0 records in [2025-09-24 09:50:24.302] 512+0 records out [2025-09-24 09:50:24.318] Starting syslogd/klogd: done [2025-09-24 09:50:24.334] DML Start [2025-09-24 09:50:24.510] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:50:24.718] DML res1: 0 [2025-09-24 09:50:25.193] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:50:25.193] Read Success [2025-09-24 09:50:25.193] Verifying certificate... [2025-09-24 09:50:25.401] Verified OK [2025-09-24 09:50:25.417] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:50:27.121] Verified OK [2025-09-24 09:50:27.121] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:50:27.713] Verified OK [2025-09-24 09:50:27.713] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:50:30.300] fs.protected_hardlinks = 1 [2025-09-24 09:50:30.300] fs.protected_symlinks = 1 [2025-09-24 09:50:30.300] kernel.modules_disabled = 1 [2025-09-24 09:50:30.492] [2025-09-24 09:50:30.492] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:50:31.786] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:50:39.508] SBL1:1210.0.1.0 [2025-09-24 09:50:39.540] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:50:41.123] SBL2:1210.0.1.0 [2025-09-24 09:50:41.155] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:50:41.267] j-A [2025-09-24 09:50:48.619] The R5 Autosar Classic is running [2025-09-24 09:50:48.619] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:50:48.640] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:50:49.247] INIT: version 2.96 booting [2025-09-24 09:50:49.359] INIT: Entering runlevel: 5 [2025-09-24 09:50:49.503] mtd24 attached [2025-09-24 09:50:49.519] mtd28 attached [2025-09-24 09:50:49.519] mtd32 attached [2025-09-24 09:50:49.567] ubi0:textures is mounted. [2025-09-24 09:50:49.583] RTNETLINK answers: File exists [2025-09-24 09:50:49.613] ubi1:animations is mounted. [2025-09-24 09:50:49.613] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:50:49.613] ubi2:dml_code is mounted. [2025-09-24 09:50:49.613] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:50:49.613] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:50:49.613] data.LB_FadeInType0=100 [2025-09-24 09:50:49.645] data.CHLH_FadeInType0=0 [2025-09-24 09:50:49.645] data.WU_FadeInDelay=0 [2025-09-24 09:50:49.645] max_time_out=0 [2025-09-24 09:50:49.645] No splash screen [2025-09-24 09:50:49.645] stop dss Done [2025-09-24 09:50:49.645] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:50:49.645] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:50:49.718] /dev/mem opened. [2025-09-24 09:50:49.718] Memory mapped at address 0xffffb34d4000. [2025-09-24 09:50:49.718] Read at address 0x00600018 (0xffffb34d4018): 0x00000000 [2025-09-24 09:50:49.718] Write at address 0x00600018 (0xffffb34d4018): 0x00400040, readback 0x00400040 [2025-09-24 09:50:49.734] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:50:49.750] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:50:49.958] Loaded PowerVR consumer services. [2025-09-24 09:50:50.032] Waiting data available... [2025-09-24 09:50:50.032] 512+0 records in [2025-09-24 09:50:50.032] 512+0 records out [2025-09-24 09:50:50.048] Starting syslogd/klogd: done [2025-09-24 09:50:50.064] DML Start [2025-09-24 09:50:50.224] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:50:50.463] DML res1: 0 [2025-09-24 09:50:50.911] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:50:50.927] Read Success [2025-09-24 09:50:50.927] Verifying certificate... [2025-09-24 09:50:51.231] Verified OK [2025-09-24 09:50:51.246] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:50:52.820] Verified OK [2025-09-24 09:50:52.820] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:50:53.425] Verified OK [2025-09-24 09:50:53.425] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:50:56.144] fs.protected_hardlinks = 1 [2025-09-24 09:50:56.144] fs.protected_symlinks = 1 [2025-09-24 09:50:56.160] kernel.modules_disabled = 1 [2025-09-24 09:50:56.352] [2025-09-24 09:50:56.352] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:50:57.497] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:51:05.220] SBL1:1210.0.1.0 [2025-09-24 09:51:05.252] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:51:06.834] SBL2:1210.0.1.0 [2025-09-24 09:51:06.866] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:51:06.979] j-A [2025-09-24 09:51:14.348] The R5 Autosar Classic is running [2025-09-24 09:51:14.348] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:51:14.348] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:51:14.956] INIT: version 2.96 booting [2025-09-24 09:51:15.067] INIT: Entering runlevel: 5 [2025-09-24 09:51:15.228] mtd28 attached [2025-09-24 09:51:15.228] mtd24 attached [2025-09-24 09:51:15.243] mtd32 attached [2025-09-24 09:51:15.291] ubi0:animations is mounted. [2025-09-24 09:51:15.291] RTNETLINK answers: File exists [2025-09-24 09:51:15.347] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:51:15.347] ubi1:textures is mounted. [2025-09-24 09:51:15.347] ubi2:dml_code is mounted. [2025-09-24 09:51:15.347] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:51:15.347] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:51:15.347] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:51:15.347] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:51:15.347] data.LB_FadeInType0=100 [2025-09-24 09:51:15.347] data.CHLH_FadeInType0=0 [2025-09-24 09:51:15.347] data.WU_FadeInDelay=0 [2025-09-24 09:51:15.347] max_time_out=0 [2025-09-24 09:51:15.347] No splash screen [2025-09-24 09:51:15.347] stop dss Done [2025-09-24 09:51:15.379] /dev/mem opened. [2025-09-24 09:51:15.379] Memory mapped at address 0xffffb7842000. [2025-09-24 09:51:15.405] Read at address 0x00600018 (0xffffb7842018): 0x00000000 [2025-09-24 09:51:15.405] Write at address 0x00600018 (0xffffb7842018): 0x00400040, readback 0x00400040 [2025-09-24 09:51:15.437] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:51:15.437] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:51:15.581] Loaded PowerVR consumer services. [2025-09-24 09:51:15.692] Waiting data available... [2025-09-24 09:51:15.724] 512+0 records in [2025-09-24 09:51:15.724] 512+0 records out [2025-09-24 09:51:15.772] Starting syslogd/klogd: done [2025-09-24 09:51:15.788] DML Start [2025-09-24 09:51:15.948] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:51:16.125] DML res1: 0 [2025-09-24 09:51:16.620] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:51:16.649] Read Success [2025-09-24 09:51:16.649] Verifying certificate... [2025-09-24 09:51:16.921] Verified OK [2025-09-24 09:51:16.937] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:51:18.533] Verified OK [2025-09-24 09:51:18.533] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:51:19.122] Verified OK [2025-09-24 09:51:19.122] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:51:21.707] fs.protected_hardlinks = 1 [2025-09-24 09:51:21.707] fs.protected_symlinks = 1 [2025-09-24 09:51:21.707] kernel.modules_disabled = 1 [2025-09-24 09:51:21.883] [2025-09-24 09:51:21.883] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:51:23.223] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:51:30.935] SBL1:1210.0.1.0 [2025-09-24 09:51:30.967] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:51:32.550] SBL2:1210.0.1.0 [2025-09-24 09:51:32.581] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:51:32.693] j-A [2025-09-24 09:51:40.047] The R5 Autosar Classic is running [2025-09-24 09:51:40.047] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:51:40.068] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:51:40.675] INIT: version 2.96 booting [2025-09-24 09:51:40.787] INIT: Entering runlevel: 5 [2025-09-24 09:51:40.946] mtd28 attached [2025-09-24 09:51:40.946] mtd24 attached [2025-09-24 09:51:40.962] mtd32 attached [2025-09-24 09:51:41.010] ubi0:animations is mounted. [2025-09-24 09:51:41.010] ubi1:textures is mounted. [2025-09-24 09:51:41.072] RTNETLINK answers: File exists [2025-09-24 09:51:41.072] ubi2:dml_code is mounted. [2025-09-24 09:51:41.072] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:51:41.072] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:51:41.072] data.LB_FadeInType0=100 [2025-09-24 09:51:41.072] data.CHLH_FadeInType0=0 [2025-09-24 09:51:41.072] data.WU_FadeInDelay=0 [2025-09-24 09:51:41.072] max_time_out=0 [2025-09-24 09:51:41.072] No splash screen [2025-09-24 09:51:41.072] stop dss Done [2025-09-24 09:51:41.072] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:51:41.072] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:51:41.072] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:51:41.103] /dev/mem opened. [2025-09-24 09:51:41.103] Memory mapped at address 0xffffa9212000. [2025-09-24 09:51:41.129] Read at address 0x00600018 (0xffffa9212018): 0x00000000 [2025-09-24 09:51:41.129] Write at address 0x00600018 (0xffffa9212018): 0x00400040, readback 0x00400040 [2025-09-24 09:51:41.177] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:51:41.193] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:51:41.417] Loaded PowerVR consumer services. [2025-09-24 09:51:41.433] Waiting data available... [2025-09-24 09:51:41.449] 512+0 records in [2025-09-24 09:51:41.449] 512+0 records out [2025-09-24 09:51:41.482] Starting syslogd/klogd: done [2025-09-24 09:51:41.498] DML Start [2025-09-24 09:51:41.705] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:51:41.881] DML res1: 0 [2025-09-24 09:51:42.399] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:51:42.399] Read Success [2025-09-24 09:51:42.399] Verifying certificate... [2025-09-24 09:51:42.703] Verified OK [2025-09-24 09:51:42.719] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:51:44.349] Verified OK [2025-09-24 09:51:44.349] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:51:44.925] Verified OK [2025-09-24 09:51:44.925] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:51:47.435] fs.protected_hardlinks = 1 [2025-09-24 09:51:47.451] fs.protected_symlinks = 1 [2025-09-24 09:51:47.451] kernel.modules_disabled = 1 [2025-09-24 09:51:47.642] [2025-09-24 09:51:47.642] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:51:48.916] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:51:56.658] SBL1:1210.0.1.0 [2025-09-24 09:51:56.706] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:51:58.272] SBL2:1210.0.1.0 [2025-09-24 09:51:58.320] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:51:58.432] j-A [2025-09-24 09:52:05.802] The R5 Autosar Classic is running [2025-09-24 09:52:05.802] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:52:05.802] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:52:06.410] INIT: version 2.96 booting [2025-09-24 09:52:06.521] INIT: Entering runlevel: 5 [2025-09-24 09:52:06.681] mtd28 attached [2025-09-24 09:52:06.681] mtd32 attached [2025-09-24 09:52:06.696] mtd24 attached [2025-09-24 09:52:06.712] ubi0:animations is mounted. [2025-09-24 09:52:06.745] RTNETLINK answers: File exists [2025-09-24 09:52:06.745] ubi1:dml_code is mounted. [2025-09-24 09:52:06.806] ubi2:textures is mounted. [2025-09-24 09:52:06.806] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:52:06.806] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:52:06.806] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:52:06.806] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:52:06.806] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:52:06.806] data.LB_FadeInType0=100 [2025-09-24 09:52:06.806] data.CHLH_FadeInType0=0 [2025-09-24 09:52:06.806] data.WU_FadeInDelay=0 [2025-09-24 09:52:06.806] max_time_out=0 [2025-09-24 09:52:06.806] No splash screen [2025-09-24 09:52:06.806] stop dss Done [2025-09-24 09:52:06.838] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:52:06.881] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:52:06.881] /dev/mem opened. [2025-09-24 09:52:06.881] Memory mapped at address 0xffff80dd4000. [2025-09-24 09:52:06.881] Read at address 0x00600018 (0xffff80dd4018): 0x00000000 [2025-09-24 09:52:06.881] Write at address 0x00600018 (0xffff80dd4018): 0x00400040, readback 0x00400040 [2025-09-24 09:52:06.976] Loaded PowerVR consumer services. [2025-09-24 09:52:07.153] Waiting data available... [2025-09-24 09:52:07.184] 512+0 records in [2025-09-24 09:52:07.184] 512+0 records out [2025-09-24 09:52:07.232] Starting syslogd/klogd: done [2025-09-24 09:52:07.248] DML Start [2025-09-24 09:52:07.408] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:52:07.632] DML res1: 0 [2025-09-24 09:52:08.103] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:52:08.103] Read Success [2025-09-24 09:52:08.103] Verifying certificate... [2025-09-24 09:52:08.342] Verified OK [2025-09-24 09:52:08.358] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:52:10.001] Verified OK [2025-09-24 09:52:10.001] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:52:10.545] Verified OK [2025-09-24 09:52:10.545] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:52:13.022] fs.protected_hardlinks = 1 [2025-09-24 09:52:13.049] fs.protected_symlinks = 1 [2025-09-24 09:52:13.049] kernel.modules_disabled = 1 [2025-09-24 09:52:13.225] [2025-09-24 09:52:13.225] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:52:14.679] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:52:22.357] SBL1:1210.0.1.0 [2025-09-24 09:52:22.405] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:52:23.972] SBL2:1210.0.1.0 [2025-09-24 09:52:24.020] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:52:24.116] j-A [2025-09-24 09:52:31.471] The R5 Autosar Classic is running [2025-09-24 09:52:31.493] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:52:31.493] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:52:32.101] INIT: version 2.96 booting [2025-09-24 09:52:32.213] INIT: Entering runlevel: 5 [2025-09-24 09:52:32.373] mtd32 attached [2025-09-24 09:52:32.373] mtd28 attached [2025-09-24 09:52:32.389] mtd24 attached [2025-09-24 09:52:32.437] ubi0:dml_code is mounted. [2025-09-24 09:52:32.437] RTNETLINK answers: File exists [2025-09-24 09:52:32.476] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:52:32.476] ubi2:textures is mounted. [2025-09-24 09:52:32.476] ubi1:animations is mounted. [2025-09-24 09:52:32.476] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:52:32.476] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:52:32.476] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:52:32.476] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:52:32.498] data.LB_FadeInType0=100 [2025-09-24 09:52:32.498] data.CHLH_FadeInType0=0 [2025-09-24 09:52:32.498] data.WU_FadeInDelay=0 [2025-09-24 09:52:32.498] max_time_out=0 [2025-09-24 09:52:32.498] No splash screen [2025-09-24 09:52:32.498] stop dss Done [2025-09-24 09:52:32.546] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:52:32.587] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:52:32.587] /dev/mem opened. [2025-09-24 09:52:32.587] Memory mapped at address 0xffff9e391000. [2025-09-24 09:52:32.587] Read at address 0x00600018 (0xffff9e391018): 0x00000000 [2025-09-24 09:52:32.587] Write at address 0x00600018 (0xffff9e391018): 0x00400040, readback 0x00400040 [2025-09-24 09:52:32.666] Loaded PowerVR consumer services. [2025-09-24 09:52:32.854] Waiting data available... [2025-09-24 09:52:32.854] 512+0 records in [2025-09-24 09:52:32.854] 512+0 records out [2025-09-24 09:52:32.902] Starting syslogd/klogd: done [2025-09-24 09:52:32.919] DML Start [2025-09-24 09:52:33.046] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:52:33.302] DML res1: 0 [2025-09-24 09:52:33.811] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:52:33.811] Read Success [2025-09-24 09:52:33.811] Verifying certificate... [2025-09-24 09:52:34.035] Verified OK [2025-09-24 09:52:34.050] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:52:35.818] Verified OK [2025-09-24 09:52:35.818] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:52:36.394] Verified OK [2025-09-24 09:52:36.410] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:52:38.964] fs.protected_hardlinks = 1 [2025-09-24 09:52:38.964] fs.protected_symlinks = 1 [2025-09-24 09:52:38.964] kernel.modules_disabled = 1 [2025-09-24 09:52:39.155] [2025-09-24 09:52:39.155] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:52:40.355] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:52:48.064] SBL1:1210.0.1.0 [2025-09-24 09:52:48.112] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:52:49.680] SBL2:1210.0.1.0 [2025-09-24 09:52:49.728] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:52:49.824] j-A [2025-09-24 09:52:57.178] The R5 Autosar Classic is running [2025-09-24 09:52:57.203] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:52:57.203] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:52:57.811] INIT: version 2.96 booting [2025-09-24 09:52:57.922] INIT: Entering runlevel: 5 [2025-09-24 09:52:58.066] mtd24 attached [2025-09-24 09:52:58.082] mtd28 attached [2025-09-24 09:52:58.098] mtd32 attached [2025-09-24 09:52:58.129] ubi0:textures is mounted. [2025-09-24 09:52:58.146] RTNETLINK answers: File exists [2025-09-24 09:52:58.196] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:52:58.196] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:52:58.196] ubi1:animations is mounted. [2025-09-24 09:52:58.196] ubi2:dml_code is mounted. [2025-09-24 09:52:58.196] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:52:58.196] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:52:58.196] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:52:58.196] data.LB_FadeInType0=100 [2025-09-24 09:52:58.196] data.CHLH_FadeInType0=0 [2025-09-24 09:52:58.196] data.WU_FadeInDelay=0 [2025-09-24 09:52:58.196] max_time_out=0 [2025-09-24 09:52:58.196] No splash screen [2025-09-24 09:52:58.196] stop dss Done [2025-09-24 09:52:58.278] /dev/mem opened. [2025-09-24 09:52:58.278] Memory mapped at address 0xffffba6fa000. [2025-09-24 09:52:58.278] Read at address 0x00600018 (0xffffba6fa018): 0x00000000 [2025-09-24 09:52:58.278] Write at address 0x00600018 (0xffffba6fa018): 0x00400040, readback 0x00400040 [2025-09-24 09:52:58.278] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:52:58.278] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:52:58.541] Waiting data available... [2025-09-24 09:52:58.541] Loaded PowerVR consumer services. [2025-09-24 09:52:58.573] 512+0 records in [2025-09-24 09:52:58.573] 512+0 records out [2025-09-24 09:52:58.621] Starting syslogd/klogd: done [2025-09-24 09:52:58.637] DML Start [2025-09-24 09:52:58.813] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:52:59.053] DML res1: 0 [2025-09-24 09:52:59.445] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:52:59.445] Read Success [2025-09-24 09:52:59.445] Verifying certificate... [2025-09-24 09:52:59.716] Verified OK [2025-09-24 09:52:59.732] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:53:01.251] Verified OK [2025-09-24 09:53:01.267] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:53:01.952] Verified OK [2025-09-24 09:53:01.952] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:53:04.733] fs.protected_hardlinks = 1 [2025-09-24 09:53:04.749] fs.protected_symlinks = 1 [2025-09-24 09:53:04.749] kernel.modules_disabled = 1 [2025-09-24 09:53:04.940] [2025-09-24 09:53:04.940] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:53:06.086] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:53:13.781] SBL1:1210.0.1.0 [2025-09-24 09:53:13.813] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:53:15.395] SBL2:1210.0.1.0 [2025-09-24 09:53:15.428] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:53:15.539] j-A [2025-09-24 09:53:22.913] The R5 Autosar Classic is running [2025-09-24 09:53:22.913] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:53:22.913] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:53:23.521] INIT: version 2.96 booting [2025-09-24 09:53:23.633] INIT: Entering runlevel: 5 [2025-09-24 09:53:23.793] mtd32 attached [2025-09-24 09:53:23.793] mtd24 attached [2025-09-24 09:53:23.809] mtd28 attached [2025-09-24 09:53:23.857] ubi0:dml_code is mounted. [2025-09-24 09:53:23.857] RTNETLINK answers: File exists [2025-09-24 09:53:23.914] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:53:23.914] ubi2:animations is mounted. [2025-09-24 09:53:23.914] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:53:23.914] ubi1:textures is mounted. [2025-09-24 09:53:23.914] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:53:23.914] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:53:23.914] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:53:23.914] data.LB_FadeInType0=100 [2025-09-24 09:53:23.914] data.CHLH_FadeInType0=0 [2025-09-24 09:53:23.914] data.WU_FadeInDelay=0 [2025-09-24 09:53:23.914] max_time_out=0 [2025-09-24 09:53:23.914] No splash screen [2025-09-24 09:53:23.914] stop dss Done [2025-09-24 09:53:23.946] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:53:23.962] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:53:23.997] /dev/mem opened. [2025-09-24 09:53:23.997] Memory mapped at address 0xffff8d21b000. [2025-09-24 09:53:23.997] Read at address 0x00600018 (0xffff8d21b018): 0x00000000 [2025-09-24 09:53:23.997] Write at address 0x00600018 (0xffff8d21b018): 0x00400040, readback 0x00400040 [2025-09-24 09:53:24.270] Loaded PowerVR consumer services. [2025-09-24 09:53:24.317] Waiting data available... [2025-09-24 09:53:24.317] 512+0 records in [2025-09-24 09:53:24.317] 512+0 records out [2025-09-24 09:53:24.350] Starting syslogd/klogd: done [2025-09-24 09:53:24.366] DML Start [2025-09-24 09:53:24.509] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:53:24.749] DML res1: 0 [2025-09-24 09:53:25.224] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:53:25.224] Read Success [2025-09-24 09:53:25.224] Verifying certificate... [2025-09-24 09:53:25.528] Verified OK [2025-09-24 09:53:25.544] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:53:27.335] Verified OK [2025-09-24 09:53:27.335] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:53:27.825] Verified OK [2025-09-24 09:53:27.825] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:53:30.239] fs.protected_hardlinks = 1 [2025-09-24 09:53:30.255] fs.protected_symlinks = 1 [2025-09-24 09:53:30.255] kernel.modules_disabled = 1 [2025-09-24 09:53:30.464] [2025-09-24 09:53:30.464] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:53:31.790] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:53:39.509] SBL1:1210.0.1.0 [2025-09-24 09:53:39.541] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:53:41.123] SBL2:1210.0.1.0 [2025-09-24 09:53:41.155] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 09:53:41.267] j-A [2025-09-24 09:53:48.640] The R5 Autosar Classic is running [2025-09-24 09:53:48.640] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:53:48.640] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:53:49.247] INIT: version 2.96 booting [2025-09-24 09:53:49.344] INIT: Entering runlevel: 5 [2025-09-24 09:53:49.504] mtd24 attached [2025-09-24 09:53:49.520] mtd28 attached [2025-09-24 09:53:49.536] mtd32 attached [2025-09-24 09:53:49.568] ubi0:textures is mounted. [2025-09-24 09:53:49.639] ubi1:animations is mounted. [2025-09-24 09:53:49.639] RTNETLINK answers: File exists [2025-09-24 09:53:49.639] ubi2:dml_code is mounted. [2025-09-24 09:53:49.639] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:53:49.639] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:53:49.639] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:53:49.639] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:53:49.639] data.LB_FadeInType0=100 [2025-09-24 09:53:49.639] data.CHLH_FadeInType0=0 [2025-09-24 09:53:49.639] data.WU_FadeInDelay=0 [2025-09-24 09:53:49.639] max_time_out=0 [2025-09-24 09:53:49.639] No splash screen [2025-09-24 09:53:49.639] stop dss Done [2025-09-24 09:53:49.639] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:53:49.716] /dev/mem opened. [2025-09-24 09:53:49.716] Memory mapped at address 0xffff910bf000. [2025-09-24 09:53:49.716] Read at address 0x00600018 (0xffff910bf018): 0x00000000 [2025-09-24 09:53:49.716] Write at address 0x00600018 (0xffff910bf018): 0x00400040, readback 0x00400040 [2025-09-24 09:53:49.716] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:53:49.716] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:53:49.811] Loaded PowerVR consumer services. [2025-09-24 09:53:49.971] Waiting data available... [2025-09-24 09:53:49.987] 512+0 records in [2025-09-24 09:53:49.987] 512+0 records out [2025-09-24 09:53:50.035] Starting syslogd/klogd: done [2025-09-24 09:53:50.051] DML Start [2025-09-24 09:53:50.212] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:53:50.434] DML res1: 0 [2025-09-24 09:53:50.931] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:53:50.951] Read Success [2025-09-24 09:53:50.951] Verifying certificate... [2025-09-24 09:53:51.191] Verified OK [2025-09-24 09:53:51.207] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:53:53.012] Verified OK [2025-09-24 09:53:53.012] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:53:53.515] Verified OK [2025-09-24 09:53:53.515] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:53:55.930] fs.protected_hardlinks = 1 [2025-09-24 09:53:55.945] fs.protected_symlinks = 1 [2025-09-24 09:53:55.945] kernel.modules_disabled = 1 [2025-09-24 09:53:56.152] [2025-09-24 09:53:56.152] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:53:57.477] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:54:05.192] SBL1:1210.0.1.0 [2025-09-24 09:54:05.240] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:54:06.807] SBL2:1210.0.1.0 [2025-09-24 09:54:06.855] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:54:06.966] j-A [2025-09-24 09:54:14.305] The R5 Autosar Classic is running [2025-09-24 09:54:14.336] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:54:14.336] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:54:14.944] INIT: version 2.96 booting [2025-09-24 09:54:15.056] INIT: Entering runlevel: 5 [2025-09-24 09:54:15.200] mtd24 attached [2025-09-24 09:54:15.231] mtd32 attached [2025-09-24 09:54:15.231] mtd28 attached [2025-09-24 09:54:15.263] ubi0:textures is mounted. [2025-09-24 09:54:15.279] RTNETLINK answers: File exists [2025-09-24 09:54:15.344] ubi1:dml_code is mounted. [2025-09-24 09:54:15.344] ubi2:animations is mounted. [2025-09-24 09:54:15.344] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:54:15.344] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:54:15.344] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:54:15.344] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:54:15.344] data.LB_FadeInType0=100 [2025-09-24 09:54:15.344] data.CHLH_FadeInType0=0 [2025-09-24 09:54:15.344] data.WU_FadeInDelay=0 [2025-09-24 09:54:15.344] max_time_out=0 [2025-09-24 09:54:15.344] No splash screen [2025-09-24 09:54:15.344] stop dss Done [2025-09-24 09:54:15.344] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:54:15.411] /dev/mem opened. [2025-09-24 09:54:15.411] Memory mapped at address 0xffffbf421000. [2025-09-24 09:54:15.411] Read at address 0x00600018 (0xffffbf421018): 0x00000000 [2025-09-24 09:54:15.411] Write at address 0x00600018 (0xffffbf421018): 0x00400040, readback 0x00400040 [2025-09-24 09:54:15.459] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:54:15.474] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:54:15.682] Loaded PowerVR consumer services. [2025-09-24 09:54:15.698] Waiting data available... [2025-09-24 09:54:15.714] 512+0 records in [2025-09-24 09:54:15.714] 512+0 records out [2025-09-24 09:54:15.747] Starting syslogd/klogd: done [2025-09-24 09:54:15.763] DML Start [2025-09-24 09:54:15.922] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:54:16.146] DML res1: 0 [2025-09-24 09:54:16.562] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:54:16.578] Read Success [2025-09-24 09:54:16.578] Verifying certificate... [2025-09-24 09:54:16.802] Verified OK [2025-09-24 09:54:16.817] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:54:18.413] Verified OK [2025-09-24 09:54:18.413] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:54:19.052] Verified OK [2025-09-24 09:54:19.052] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:54:21.754] fs.protected_hardlinks = 1 [2025-09-24 09:54:21.770] fs.protected_symlinks = 1 [2025-09-24 09:54:21.770] kernel.modules_disabled = 1 [2025-09-24 09:54:21.962] [2025-09-24 09:54:21.962] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:54:23.193] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:54:30.902] SBL1:1210.0.1.0 [2025-09-24 09:54:30.950] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:54:32.517] SBL2:1210.0.1.0 [2025-09-24 09:54:32.565] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:54:32.661] j-A [2025-09-24 09:54:40.015] The R5 Autosar Classic is running [2025-09-24 09:54:40.037] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:54:40.037] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:54:40.645] INIT: version 2.96 booting [2025-09-24 09:54:40.757] INIT: Entering runlevel: 5 [2025-09-24 09:54:40.901] mtd28 attached [2025-09-24 09:54:40.917] mtd32 attached [2025-09-24 09:54:40.933] mtd24 attached [2025-09-24 09:54:40.949] ubi0:animations is mounted. [2025-09-24 09:54:40.981] RTNETLINK answers: File exists [2025-09-24 09:54:40.981] ubi2:textures is mounted. [2025-09-24 09:54:41.036] ubi1:dml_code is mounted. [2025-09-24 09:54:41.036] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:54:41.036] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:54:41.036] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:54:41.036] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:54:41.036] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:54:41.036] data.LB_FadeInType0=100 [2025-09-24 09:54:41.036] data.CHLH_FadeInType0=0 [2025-09-24 09:54:41.036] data.WU_FadeInDelay=0 [2025-09-24 09:54:41.036] max_time_out=0 [2025-09-24 09:54:41.036] No splash screen [2025-09-24 09:54:41.036] stop dss Done [2025-09-24 09:54:41.084] /dev/mem opened. [2025-09-24 09:54:41.084] Memory mapped at address 0xffffacd7a000. [2025-09-24 09:54:41.110] Read at address 0x00600018 (0xffffacd7a018): 0x00000000 [2025-09-24 09:54:41.110] Write at address 0x00600018 (0xffffacd7a018): 0x00400040, readback 0x00400040 [2025-09-24 09:54:41.110] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:54:41.126] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:54:41.269] Loaded PowerVR consumer services. [2025-09-24 09:54:41.398] Waiting data available... [2025-09-24 09:54:41.414] 512+0 records in [2025-09-24 09:54:41.414] 512+0 records out [2025-09-24 09:54:41.462] Starting syslogd/klogd: done [2025-09-24 09:54:41.477] DML Start [2025-09-24 09:54:41.621] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:54:41.846] DML res1: 0 [2025-09-24 09:54:42.293] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:54:42.314] Read Success [2025-09-24 09:54:42.314] Verifying certificate... [2025-09-24 09:54:42.538] Verified OK [2025-09-24 09:54:42.554] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:54:44.195] Verified OK [2025-09-24 09:54:44.195] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:54:44.739] Verified OK [2025-09-24 09:54:44.739] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:54:47.473] fs.protected_hardlinks = 1 [2025-09-24 09:54:47.489] fs.protected_symlinks = 1 [2025-09-24 09:54:47.489] kernel.modules_disabled = 1 [2025-09-24 09:54:47.697] [2025-09-24 09:54:47.697] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:54:48.901] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:54:56.628] SBL1:1210.0.1.0 [2025-09-24 09:54:56.675] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:54:58.243] SBL2:1210.0.1.0 [2025-09-24 09:54:58.290] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:54:58.402] j-A [2025-09-24 09:55:05.741] The R5 Autosar Classic is running [2025-09-24 09:55:05.766] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:55:05.766] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:55:06.374] INIT: version 2.96 booting [2025-09-24 09:55:06.485] INIT: Entering runlevel: 5 [2025-09-24 09:55:06.645] mtd28 attached [2025-09-24 09:55:06.645] mtd24 attached [2025-09-24 09:55:06.677] mtd32 attached [2025-09-24 09:55:06.709] ubi0:animations is mounted. [2025-09-24 09:55:06.709] RTNETLINK answers: File exists [2025-09-24 09:55:06.774] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:55:06.774] ubi1:textures is mounted. [2025-09-24 09:55:06.774] ubi2:dml_code is mounted. [2025-09-24 09:55:06.774] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:55:06.774] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:55:06.774] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:55:06.774] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:55:06.774] data.LB_FadeInType0=100 [2025-09-24 09:55:06.774] data.CHLH_FadeInType0=0 [2025-09-24 09:55:06.774] data.WU_FadeInDelay=0 [2025-09-24 09:55:06.774] max_time_out=0 [2025-09-24 09:55:06.774] No splash screen [2025-09-24 09:55:06.774] stop dss Done [2025-09-24 09:55:06.822] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:55:06.860] /dev/mem opened. [2025-09-24 09:55:06.860] Memory mapped at address 0xffffbc00c000. [2025-09-24 09:55:06.860] Read at address 0x00600018 (0xffffbc00c018): 0x00000000 [2025-09-24 09:55:06.860] Write at address 0x00600018 (0xffffbc00c018): 0x00400040, readback 0x00400040 [2025-09-24 09:55:06.860] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:55:06.988] Loaded PowerVR consumer services. [2025-09-24 09:55:07.116] 512+0 records in [2025-09-24 09:55:07.116] 512+0 records out [2025-09-24 09:55:07.132] Waiting data available... [2025-09-24 09:55:07.148] Starting syslogd/klogd: done [2025-09-24 09:55:07.164] DML Start [2025-09-24 09:55:07.340] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:55:07.563] DML res1: 0 [2025-09-24 09:55:08.043] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:55:08.059] Read Success [2025-09-24 09:55:08.059] Verifying certificate... [2025-09-24 09:55:08.363] Verified OK [2025-09-24 09:55:08.379] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:55:09.958] Verified OK [2025-09-24 09:55:09.958] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:55:10.625] Verified OK [2025-09-24 09:55:10.625] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:55:13.279] fs.protected_hardlinks = 1 [2025-09-24 09:55:13.279] fs.protected_symlinks = 1 [2025-09-24 09:55:13.295] kernel.modules_disabled = 1 [2025-09-24 09:55:13.487] [2025-09-24 09:55:13.487] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:55:14.613] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:55:22.349] SBL1:1210.0.1.0 [2025-09-24 09:55:22.397] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:55:23.964] SBL2:1210.0.1.0 [2025-09-24 09:55:24.012] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:55:24.108] j-A [2025-09-24 09:55:31.462] The R5 Autosar Classic is running [2025-09-24 09:55:31.487] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:55:31.487] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:55:32.095] INIT: version 2.96 booting [2025-09-24 09:55:32.206] INIT: Entering runlevel: 5 [2025-09-24 09:55:32.366] mtd32 attached [2025-09-24 09:55:32.382] mtd28 attached [2025-09-24 09:55:32.382] mtd24 attached [2025-09-24 09:55:32.430] ubi0:dml_code is mounted. [2025-09-24 09:55:32.430] RTNETLINK answers: File exists [2025-09-24 09:55:32.446] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:55:32.446] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:55:32.499] ubi1:animations is mounted. [2025-09-24 09:55:32.499] ubi2:textures is mounted. [2025-09-24 09:55:32.499] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:55:32.499] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:55:32.499] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:55:32.499] data.LB_FadeInType0=100 [2025-09-24 09:55:32.499] data.CHLH_FadeInType0=0 [2025-09-24 09:55:32.499] data.WU_FadeInDelay=0 [2025-09-24 09:55:32.499] max_time_out=0 [2025-09-24 09:55:32.499] No splash screen [2025-09-24 09:55:32.499] stop dss Done [2025-09-24 09:55:32.530] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:55:32.572] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:55:32.572] /dev/mem opened. [2025-09-24 09:55:32.572] Memory mapped at address 0xffff8667e000. [2025-09-24 09:55:32.572] Read at address 0x00600018 (0xffff8667e018): 0x00000000 [2025-09-24 09:55:32.572] Write at address 0x00600018 (0xffff8667e018): 0x00400040, readback 0x00400040 [2025-09-24 09:55:32.667] Loaded PowerVR consumer services. [2025-09-24 09:55:32.843] Waiting data available... [2025-09-24 09:55:32.859] 512+0 records in [2025-09-24 09:55:32.859] 512+0 records out [2025-09-24 09:55:32.907] Starting syslogd/klogd: done [2025-09-24 09:55:32.923] DML Start [2025-09-24 09:55:33.162] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:55:33.355] DML res1: 0 [2025-09-24 09:55:33.764] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:55:33.764] Read Success [2025-09-24 09:55:33.764] Verifying certificate... [2025-09-24 09:55:33.987] Verified OK [2025-09-24 09:55:34.003] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:55:35.678] Verified OK [2025-09-24 09:55:35.678] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:55:36.327] Verified OK [2025-09-24 09:55:36.327] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:55:38.966] fs.protected_hardlinks = 1 [2025-09-24 09:55:38.981] fs.protected_symlinks = 1 [2025-09-24 09:55:38.981] kernel.modules_disabled = 1 [2025-09-24 09:55:39.174] [2025-09-24 09:55:39.174] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:55:40.414] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:55:48.070] SBL1:1210.0.1.0 [2025-09-24 09:55:48.118] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:55:49.684] SBL2:1210.0.1.0 [2025-09-24 09:55:49.732] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:55:49.829] j-A [2025-09-24 09:55:57.182] The R5 Autosar Classic is running [2025-09-24 09:55:57.206] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:55:57.206] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:55:57.813] INIT: version 2.96 booting [2025-09-24 09:55:57.925] INIT: Entering runlevel: 5 [2025-09-24 09:55:58.085] mtd28 attached [2025-09-24 09:55:58.101] mtd24 attached [2025-09-24 09:55:58.117] mtd32 attached [2025-09-24 09:55:58.149] ubi0:animations is mounted. [2025-09-24 09:55:58.149] ubi1:textures is mounted. [2025-09-24 09:55:58.215] RTNETLINK answers: File exists [2025-09-24 09:55:58.215] ubi2:dml_code is mounted. [2025-09-24 09:55:58.215] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:55:58.215] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:55:58.215] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:55:58.215] data.LB_FadeInType0=100 [2025-09-24 09:55:58.215] data.CHLH_FadeInType0=0 [2025-09-24 09:55:58.215] data.WU_FadeInDelay=0 [2025-09-24 09:55:58.215] max_time_out=0 [2025-09-24 09:55:58.215] No splash screen [2025-09-24 09:55:58.215] stop dss Done [2025-09-24 09:55:58.215] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:55:58.215] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:55:58.247] /dev/mem opened. [2025-09-24 09:55:58.247] Memory mapped at address 0xffffb974a000. [2025-09-24 09:55:58.283] Read at address 0x00600018 (0xffffb974a018): 0x00000000 [2025-09-24 09:55:58.283] Write at address 0x00600018 (0xffffb974a018): 0x00400040, readback 0x00400040 [2025-09-24 09:55:58.283] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:55:58.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:55:58.582] Loaded PowerVR consumer services. [2025-09-24 09:55:58.582] Waiting data available... [2025-09-24 09:55:58.597] 512+0 records in [2025-09-24 09:55:58.597] 512+0 records out [2025-09-24 09:55:58.645] Starting syslogd/klogd: done [2025-09-24 09:55:58.661] DML Start [2025-09-24 09:55:58.853] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:55:59.078] DML res1: 0 [2025-09-24 09:55:59.507] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:55:59.507] Read Success [2025-09-24 09:55:59.507] Verifying certificate... [2025-09-24 09:55:59.746] Verified OK [2025-09-24 09:55:59.762] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:56:01.465] Verified OK [2025-09-24 09:56:01.465] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:56:02.015] Verified OK [2025-09-24 09:56:02.015] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:56:04.462] fs.protected_hardlinks = 1 [2025-09-24 09:56:04.462] fs.protected_symlinks = 1 [2025-09-24 09:56:04.478] kernel.modules_disabled = 1 [2025-09-24 09:56:04.670] [2025-09-24 09:56:04.670] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:56:06.113] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:56:13.760] SBL1:1210.0.1.0 [2025-09-24 09:56:13.808] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:56:15.374] SBL2:1210.0.1.0 [2025-09-24 09:56:15.422] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:56:15.518] j-A [2025-09-24 09:56:22.871] The R5 Autosar Classic is running [2025-09-24 09:56:22.896] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:56:22.896] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:56:23.504] INIT: version 2.96 booting [2025-09-24 09:56:23.616] INIT: Entering runlevel: 5 [2025-09-24 09:56:23.776] mtd28 attached [2025-09-24 09:56:23.791] mtd24 attached [2025-09-24 09:56:23.791] mtd32 attached [2025-09-24 09:56:23.840] RTNETLINK answers: File exists [2025-09-24 09:56:23.884] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:56:23.884] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:56:23.884] ubi0:animations is mounted. [2025-09-24 09:56:23.884] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:56:23.884] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:56:23.884] ubi1:textures is mounted. [2025-09-24 09:56:23.884] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:56:23.884] ubi2:dml_code is mounted. [2025-09-24 09:56:23.911] data.LB_FadeInType0=100 [2025-09-24 09:56:23.911] data.CHLH_FadeInType0=0 [2025-09-24 09:56:23.911] data.WU_FadeInDelay=0 [2025-09-24 09:56:23.911] max_time_out=0 [2025-09-24 09:56:23.911] No splash screen [2025-09-24 09:56:23.911] stop dss Done [2025-09-24 09:56:23.927] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:56:23.943] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:56:23.976] /dev/mem opened. [2025-09-24 09:56:23.976] Memory mapped at address 0xffffbef2d000. [2025-09-24 09:56:23.976] Read at address 0x00600018 (0xffffbef2d018): 0x00000000 [2025-09-24 09:56:23.976] Write at address 0x00600018 (0xffffbef2d018): 0x00400040, readback 0x00400040 [2025-09-24 09:56:24.072] Loaded PowerVR consumer services. [2025-09-24 09:56:24.264] Waiting data available... [2025-09-24 09:56:24.280] 512+0 records in [2025-09-24 09:56:24.280] 512+0 records out [2025-09-24 09:56:24.296] Starting syslogd/klogd: done [2025-09-24 09:56:24.328] DML Start [2025-09-24 09:56:24.488] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:56:24.744] DML res1: 0 [2025-09-24 09:56:25.095] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:56:25.116] Read Success [2025-09-24 09:56:25.116] Verifying certificate... [2025-09-24 09:56:25.373] Verified OK [2025-09-24 09:56:25.373] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:56:27.019] Verified OK [2025-09-24 09:56:27.036] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:56:27.716] Verified OK [2025-09-24 09:56:27.716] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:56:30.305] fs.protected_hardlinks = 1 [2025-09-24 09:56:30.321] fs.protected_symlinks = 1 [2025-09-24 09:56:30.321] kernel.modules_disabled = 1 [2025-09-24 09:56:30.529] [2025-09-24 09:56:30.529] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:56:31.754] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:56:39.490] SBL1:1210.0.1.0 [2025-09-24 09:56:39.538] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:56:41.105] SBL2:1210.0.1.0 [2025-09-24 09:56:41.153] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:56:41.249] j-A [2025-09-24 09:56:48.602] The R5 Autosar Classic is running [2025-09-24 09:56:48.626] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:56:48.626] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:56:49.234] INIT: version 2.96 booting [2025-09-24 09:56:49.345] INIT: Entering runlevel: 5 [2025-09-24 09:56:49.506] mtd24 attached [2025-09-24 09:56:49.506] mtd28 attached [2025-09-24 09:56:49.522] mtd32 attached [2025-09-24 09:56:49.569] ubi0:textures is mounted. [2025-09-24 09:56:49.604] ubi1:animations is mounted. [2025-09-24 09:56:49.604] RTNETLINK answers: File exists [2025-09-24 09:56:49.604] ubi2:dml_code is mounted. [2025-09-24 09:56:49.604] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:56:49.604] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:56:49.641] data.LB_FadeInType0=100 [2025-09-24 09:56:49.641] data.CHLH_FadeInType0=0 [2025-09-24 09:56:49.641] data.WU_FadeInDelay=0 [2025-09-24 09:56:49.641] max_time_out=0 [2025-09-24 09:56:49.641] No splash screen [2025-09-24 09:56:49.641] stop dss Done [2025-09-24 09:56:49.641] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:56:49.641] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:56:49.641] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:56:49.709] /dev/mem opened. [2025-09-24 09:56:49.709] Memory mapped at address 0xffff9fef8000. [2025-09-24 09:56:49.709] Read at address 0x00600018 (0xffff9fef8018): 0x00000000 [2025-09-24 09:56:49.709] Write at address 0x00600018 (0xffff9fef8018): 0x00400040, readback 0x00400040 [2025-09-24 09:56:49.752] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:56:49.752] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:56:49.799] Loaded PowerVR consumer services. [2025-09-24 09:56:49.959] Waiting data available... [2025-09-24 09:56:49.975] 512+0 records in [2025-09-24 09:56:49.991] 512+0 records out [2025-09-24 09:56:50.007] Starting syslogd/klogd: done [2025-09-24 09:56:50.023] DML Start [2025-09-24 09:56:50.183] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:56:50.390] DML res1: 0 [2025-09-24 09:56:50.835] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:56:50.835] Read Success [2025-09-24 09:56:50.835] Verifying certificate... [2025-09-24 09:56:51.091] Verified OK [2025-09-24 09:56:51.123] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:56:52.765] Verified OK [2025-09-24 09:56:52.765] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:56:53.404] Verified OK [2025-09-24 09:56:53.420] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:56:56.074] fs.protected_hardlinks = 1 [2025-09-24 09:56:56.074] fs.protected_symlinks = 1 [2025-09-24 09:56:56.074] kernel.modules_disabled = 1 [2025-09-24 09:56:56.281] [2025-09-24 09:56:56.281] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:56:57.459] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:57:05.192] SBL1:1210.0.1.0 [2025-09-24 09:57:05.224] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:57:06.807] SBL2:1210.0.1.0 [2025-09-24 09:57:06.838] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 09:57:06.950] j-A [2025-09-24 09:57:14.304] The R5 Autosar Classic is running [2025-09-24 09:57:14.325] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:57:14.325] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:57:14.932] INIT: version 2.96 booting [2025-09-24 09:57:15.044] INIT: Entering runlevel: 5 [2025-09-24 09:57:15.188] mtd24 attached [2025-09-24 09:57:15.204] mtd32 attached [2025-09-24 09:57:15.204] mtd28 attached [2025-09-24 09:57:15.304] ubi0:textures is mounted. [2025-09-24 09:57:15.304] RTNETLINK answers: File exists [2025-09-24 09:57:15.304] ubi2:animations is mounted. [2025-09-24 09:57:15.304] ubi1:dml_code is mounted. [2025-09-24 09:57:15.304] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:57:15.304] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:57:15.304] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:57:15.304] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:57:15.304] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:57:15.304] data.LB_FadeInType0=100 [2025-09-24 09:57:15.325] data.CHLH_FadeInType0=0 [2025-09-24 09:57:15.325] data.WU_FadeInDelay=0 [2025-09-24 09:57:15.325] max_time_out=0 [2025-09-24 09:57:15.325] No splash screen [2025-09-24 09:57:15.325] stop dss Done [2025-09-24 09:57:15.357] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:57:15.399] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:57:15.399] /dev/mem opened. [2025-09-24 09:57:15.399] Memory mapped at address 0xffff8a3ec000. [2025-09-24 09:57:15.399] Read at address 0x00600018 (0xffff8a3ec018): 0x00000000 [2025-09-24 09:57:15.399] Write at address 0x00600018 (0xffff8a3ec018): 0x00400040, readback 0x00400040 [2025-09-24 09:57:15.558] Loaded PowerVR consumer services. [2025-09-24 09:57:15.687] Waiting data available... [2025-09-24 09:57:15.703] 512+0 records in [2025-09-24 09:57:15.703] 512+0 records out [2025-09-24 09:57:15.751] Starting syslogd/klogd: done [2025-09-24 09:57:15.767] DML Start [2025-09-24 09:57:15.910] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:57:16.151] DML res1: 0 [2025-09-24 09:57:16.661] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:57:16.662] Read Success [2025-09-24 09:57:16.662] Verifying certificate... [2025-09-24 09:57:16.949] Verified OK [2025-09-24 09:57:16.981] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:57:18.659] Verified OK [2025-09-24 09:57:18.680] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:57:19.286] Verified OK [2025-09-24 09:57:19.286] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:57:21.844] fs.protected_hardlinks = 1 [2025-09-24 09:57:21.860] fs.protected_symlinks = 1 [2025-09-24 09:57:21.860] kernel.modules_disabled = 1 [2025-09-24 09:57:22.068] [2025-09-24 09:57:22.068] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:57:23.184] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:57:30.875] SBL1:1210.0.1.0 [2025-09-24 09:57:30.923] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:57:32.489] SBL2:1210.0.1.0 [2025-09-24 09:57:32.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:57:32.633] j-A [2025-09-24 09:57:39.987] The R5 Autosar Classic is running [2025-09-24 09:57:40.011] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:57:40.011] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:57:40.618] INIT: version 2.96 booting [2025-09-24 09:57:40.731] INIT: Entering runlevel: 5 [2025-09-24 09:57:40.890] mtd28 attached [2025-09-24 09:57:40.890] mtd24 attached [2025-09-24 09:57:40.906] mtd32 attached [2025-09-24 09:57:40.938] ubi0:animations is mounted. [2025-09-24 09:57:40.954] ubi1:textures is mounted. [2025-09-24 09:57:40.970] RTNETLINK answers: File exists [2025-09-24 09:57:40.970] ubi2:dml_code is mounted. [2025-09-24 09:57:41.022] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:57:41.022] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:57:41.022] data.LB_FadeInType0=100 [2025-09-24 09:57:41.022] data.CHLH_FadeInType0=0 [2025-09-24 09:57:41.022] data.WU_FadeInDelay=0 [2025-09-24 09:57:41.022] max_time_out=0 [2025-09-24 09:57:41.022] No splash screen [2025-09-24 09:57:41.022] stop dss Done [2025-09-24 09:57:41.022] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:57:41.022] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:57:41.022] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:57:41.038] /dev/mem opened. [2025-09-24 09:57:41.038] Memory mapped at address 0xffffadf21000. [2025-09-24 09:57:41.064] Read at address 0x00600018 (0xffffadf21018): 0x00000000 [2025-09-24 09:57:41.064] Write at address 0x00600018 (0xffffadf21018): 0x00400040, readback 0x00400040 [2025-09-24 09:57:41.096] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:57:41.121] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:57:41.200] Loaded PowerVR consumer services. [2025-09-24 09:57:41.344] Waiting data available... [2025-09-24 09:57:41.376] 512+0 records in [2025-09-24 09:57:41.376] 512+0 records out [2025-09-24 09:57:41.392] Starting syslogd/klogd: done [2025-09-24 09:57:41.408] DML Start [2025-09-24 09:57:41.568] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:57:41.840] DML res1: 0 [2025-09-24 09:57:42.239] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:57:42.255] Read Success [2025-09-24 09:57:42.255] Verifying certificate... [2025-09-24 09:57:42.543] Verified OK [2025-09-24 09:57:42.558] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:57:44.290] Verified OK [2025-09-24 09:57:44.290] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:57:44.856] Verified OK [2025-09-24 09:57:44.856] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:57:47.302] fs.protected_hardlinks = 1 [2025-09-24 09:57:47.302] fs.protected_symlinks = 1 [2025-09-24 09:57:47.318] kernel.modules_disabled = 1 [2025-09-24 09:57:47.510] [2025-09-24 09:57:47.510] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:57:48.915] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:57:56.587] SBL1:1210.0.1.0 [2025-09-24 09:57:56.619] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:57:58.202] SBL2:1210.0.1.0 [2025-09-24 09:57:58.235] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:57:58.346] j-A [2025-09-24 09:58:05.720] The R5 Autosar Classic is running [2025-09-24 09:58:05.720] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:58:05.720] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:58:06.327] INIT: version 2.96 booting [2025-09-24 09:58:06.439] INIT: Entering runlevel: 5 [2025-09-24 09:58:06.599] mtd32 attached [2025-09-24 09:58:06.599] mtd24 attached [2025-09-24 09:58:06.615] mtd28 attached [2025-09-24 09:58:06.697] RTNETLINK answers: File exists [2025-09-24 09:58:06.697] ubi1:textures is mounted. [2025-09-24 09:58:06.697] ubi0:dml_code is mounted. [2025-09-24 09:58:06.697] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:58:06.697] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:58:06.697] ubi2:animations is mounted. [2025-09-24 09:58:06.697] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:58:06.697] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:58:06.697] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:58:06.722] data.LB_FadeInType0=100 [2025-09-24 09:58:06.722] data.CHLH_FadeInType0=0 [2025-09-24 09:58:06.722] data.WU_FadeInDelay=0 [2025-09-24 09:58:06.722] max_time_out=0 [2025-09-24 09:58:06.722] No splash screen [2025-09-24 09:58:06.722] stop dss Done [2025-09-24 09:58:06.753] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:58:06.769] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:58:06.802] /dev/mem opened. [2025-09-24 09:58:06.802] Memory mapped at address 0xffffb524f000. [2025-09-24 09:58:06.802] Read at address 0x00600018 (0xffffb524f018): 0x00000000 [2025-09-24 09:58:06.802] Write at address 0x00600018 (0xffffb524f018): 0x00400040, readback 0x00400040 [2025-09-24 09:58:07.027] Loaded PowerVR consumer services. [2025-09-24 09:58:07.058] Waiting data available... [2025-09-24 09:58:07.074] 512+0 records in [2025-09-24 09:58:07.090] 512+0 records out [2025-09-24 09:58:07.139] Starting syslogd/klogd: done [2025-09-24 09:58:07.155] DML Start [2025-09-24 09:58:07.299] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:58:07.554] DML res1: 0 [2025-09-24 09:58:07.964] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:58:07.964] Read Success [2025-09-24 09:58:07.964] Verifying certificate... [2025-09-24 09:58:08.188] Verified OK [2025-09-24 09:58:08.204] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:58:09.798] Verified OK [2025-09-24 09:58:09.798] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:58:10.492] Verified OK [2025-09-24 09:58:10.492] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:58:13.126] fs.protected_hardlinks = 1 [2025-09-24 09:58:13.126] fs.protected_symlinks = 1 [2025-09-24 09:58:13.126] kernel.modules_disabled = 1 [2025-09-24 09:58:13.318] [2025-09-24 09:58:13.318] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:58:14.630] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:58:22.298] SBL1:1210.0.1.0 [2025-09-24 09:58:22.330] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:58:23.913] SBL2:1210.0.1.0 [2025-09-24 09:58:23.960] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:58:24.057] j-A [2025-09-24 09:58:31.410] The R5 Autosar Classic is running [2025-09-24 09:58:31.432] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:58:31.432] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:58:32.040] INIT: version 2.96 booting [2025-09-24 09:58:32.151] INIT: Entering runlevel: 5 [2025-09-24 09:58:32.311] mtd24 attached [2025-09-24 09:58:32.311] mtd28 attached [2025-09-24 09:58:32.327] mtd32 attached [2025-09-24 09:58:32.375] ubi0:textures is mounted. [2025-09-24 09:58:32.375] RTNETLINK answers: File exists [2025-09-24 09:58:32.391] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:58:32.445] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:58:32.445] ubi1:animations is mounted. [2025-09-24 09:58:32.445] ubi2:dml_code is mounted. [2025-09-24 09:58:32.445] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:58:32.445] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:58:32.445] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:58:32.445] data.LB_FadeInType0=100 [2025-09-24 09:58:32.445] data.CHLH_FadeInType0=0 [2025-09-24 09:58:32.445] data.WU_FadeInDelay=0 [2025-09-24 09:58:32.445] max_time_out=0 [2025-09-24 09:58:32.445] No splash screen [2025-09-24 09:58:32.445] stop dss Done [2025-09-24 09:58:32.510] /dev/mem opened. [2025-09-24 09:58:32.510] Memory mapped at address 0xffff8153c000. [2025-09-24 09:58:32.542] Read at address 0x00600018 (0xffff8153c018): 0x00000000 [2025-09-24 09:58:32.542] Write at address 0x00600018 (0xffff8153c018): 0x00400040, readback 0x00400040 [2025-09-24 09:58:32.542] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:58:32.542] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:58:32.605] Loaded PowerVR consumer services. [2025-09-24 09:58:32.798] Waiting data available... [2025-09-24 09:58:32.798] 512+0 records in [2025-09-24 09:58:32.813] 512+0 records out [2025-09-24 09:58:32.829] Starting syslogd/klogd: done [2025-09-24 09:58:32.845] DML Start [2025-09-24 09:58:33.068] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:58:33.292] DML res1: 0 [2025-09-24 09:58:33.629] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:58:33.649] Read Success [2025-09-24 09:58:33.649] Verifying certificate... [2025-09-24 09:58:33.969] Verified OK [2025-09-24 09:58:33.985] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:58:35.647] Verified OK [2025-09-24 09:58:35.663] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:58:36.286] Verified OK [2025-09-24 09:58:36.286] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:58:38.844] fs.protected_hardlinks = 1 [2025-09-24 09:58:38.844] fs.protected_symlinks = 1 [2025-09-24 09:58:38.860] kernel.modules_disabled = 1 [2025-09-24 09:58:39.052] [2025-09-24 09:58:39.052] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:58:40.383] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:58:48.002] SBL1:1210.0.1.0 [2025-09-24 09:58:48.034] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:58:49.617] SBL2:1210.0.1.0 [2025-09-24 09:58:49.649] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:58:49.761] j-A [2025-09-24 09:58:57.134] The R5 Autosar Classic is running [2025-09-24 09:58:57.134] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:58:57.134] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:58:57.741] INIT: version 2.96 booting [2025-09-24 09:58:57.852] INIT: Entering runlevel: 5 [2025-09-24 09:58:57.997] mtd24 attached [2025-09-24 09:58:58.013] mtd32 attached [2025-09-24 09:58:58.029] mtd28 attached [2025-09-24 09:58:58.045] ubi0:textures is mounted. [2025-09-24 09:58:58.110] RTNETLINK answers: File exists [2025-09-24 09:58:58.110] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:58:58.110] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:58:58.110] ubi2:animations is mounted. [2025-09-24 09:58:58.110] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:58:58.110] ubi1:dml_code is mounted. [2025-09-24 09:58:58.110] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:58:58.110] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:58:58.110] data.LB_FadeInType0=100 [2025-09-24 09:58:58.130] data.CHLH_FadeInType0=0 [2025-09-24 09:58:58.130] data.WU_FadeInDelay=0 [2025-09-24 09:58:58.130] max_time_out=0 [2025-09-24 09:58:58.130] No splash screen [2025-09-24 09:58:58.130] stop dss Done [2025-09-24 09:58:58.146] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:58:58.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:58:58.195] /dev/mem opened. [2025-09-24 09:58:58.195] Memory mapped at address 0xffffa4de6000. [2025-09-24 09:58:58.195] Read at address 0x00600018 (0xffffa4de6018): 0x00000000 [2025-09-24 09:58:58.195] Write at address 0x00600018 (0xffffa4de6018): 0x00400040, readback 0x00400040 [2025-09-24 09:58:58.388] Loaded PowerVR consumer services. [2025-09-24 09:58:58.467] Waiting data available... [2025-09-24 09:58:58.499] 512+0 records in [2025-09-24 09:58:58.499] 512+0 records out [2025-09-24 09:58:58.547] Starting syslogd/klogd: done [2025-09-24 09:58:58.563] DML Start [2025-09-24 09:58:58.739] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:58:58.947] DML res1: 0 [2025-09-24 09:58:59.458] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:58:59.479] Read Success [2025-09-24 09:58:59.479] Verifying certificate... [2025-09-24 09:58:59.767] Verified OK [2025-09-24 09:58:59.783] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:59:01.425] Verified OK [2025-09-24 09:59:01.425] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:59:02.070] Verified OK [2025-09-24 09:59:02.070] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:59:04.675] fs.protected_hardlinks = 1 [2025-09-24 09:59:04.675] fs.protected_symlinks = 1 [2025-09-24 09:59:04.691] kernel.modules_disabled = 1 [2025-09-24 09:59:04.883] [2025-09-24 09:59:04.883] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:59:06.002] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:59:13.685] SBL1:1210.0.1.0 [2025-09-24 09:59:13.716] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:59:15.299] SBL2:1210.0.1.0 [2025-09-24 09:59:15.331] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:59:15.443] j-A [2025-09-24 09:59:22.798] The R5 Autosar Classic is running [2025-09-24 09:59:22.798] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:59:22.819] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:59:23.426] INIT: version 2.96 booting [2025-09-24 09:59:23.538] INIT: Entering runlevel: 5 [2025-09-24 09:59:23.682] mtd24 attached [2025-09-24 09:59:23.698] mtd28 attached [2025-09-24 09:59:23.714] mtd32 attached [2025-09-24 09:59:23.762] ubi0:textures is mounted. [2025-09-24 09:59:23.762] RTNETLINK answers: File exists [2025-09-24 09:59:23.824] ubi1:animations is mounted. [2025-09-24 09:59:23.824] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:59:23.824] ubi2:dml_code is mounted. [2025-09-24 09:59:23.824] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:59:23.824] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:59:23.824] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:59:23.824] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:59:23.824] data.LB_FadeInType0=100 [2025-09-24 09:59:23.824] data.CHLH_FadeInType0=0 [2025-09-24 09:59:23.824] data.WU_FadeInDelay=0 [2025-09-24 09:59:23.824] max_time_out=0 [2025-09-24 09:59:23.824] No splash screen [2025-09-24 09:59:23.824] stop dss Done [2025-09-24 09:59:23.909] /dev/mem opened. [2025-09-24 09:59:23.909] Memory mapped at address 0xffffb954b000. [2025-09-24 09:59:23.909] Read at address 0x00600018 (0xffffb954b018): 0x00000000 [2025-09-24 09:59:23.909] Write at address 0x00600018 (0xffffb954b018): 0x00400040, readback 0x00400040 [2025-09-24 09:59:23.909] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:59:23.909] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:59:24.053] Loaded PowerVR consumer services. [2025-09-24 09:59:24.180] Waiting data available... [2025-09-24 09:59:24.212] 512+0 records in [2025-09-24 09:59:24.212] 512+0 records out [2025-09-24 09:59:24.228] Starting syslogd/klogd: done [2025-09-24 09:59:24.244] DML Start [2025-09-24 09:59:24.420] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:59:24.724] DML res1: 0 [2025-09-24 09:59:25.067] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:59:25.067] Read Success [2025-09-24 09:59:25.067] Verifying certificate... [2025-09-24 09:59:25.291] Verified OK [2025-09-24 09:59:25.307] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:59:26.985] Verified OK [2025-09-24 09:59:26.985] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:59:27.640] Verified OK [2025-09-24 09:59:27.640] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:59:30.276] fs.protected_hardlinks = 1 [2025-09-24 09:59:30.276] fs.protected_symlinks = 1 [2025-09-24 09:59:30.276] kernel.modules_disabled = 1 [2025-09-24 09:59:30.467] [2025-09-24 09:59:30.467] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:59:31.760] RTNETLINK answers: Cannot assign requested address [2025-09-24 09:59:39.394] SBL1:1210.0.1.0 [2025-09-24 09:59:39.426] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:59:41.009] SBL2:1210.0.1.0 [2025-09-24 09:59:41.056] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 09:59:41.152] j-A [2025-09-24 09:59:48.507] The R5 Autosar Classic is running [2025-09-24 09:59:48.528] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 09:59:48.528] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 09:59:49.136] INIT: version 2.96 booting [2025-09-24 09:59:49.248] INIT: Entering runlevel: 5 [2025-09-24 09:59:49.408] mtd32 attached [2025-09-24 09:59:49.408] mtd24 attached [2025-09-24 09:59:49.424] mtd28 attached [2025-09-24 09:59:49.472] RTNETLINK answers: File exists [2025-09-24 09:59:49.472] ubi0:dml_code is mounted. [2025-09-24 09:59:49.511] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 09:59:49.511] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 09:59:49.511] ubi1:textures is mounted. [2025-09-24 09:59:49.511] ubi2:animations is mounted. [2025-09-24 09:59:49.511] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 09:59:49.511] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 09:59:49.539] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 09:59:49.539] data.LB_FadeInType0=100 [2025-09-24 09:59:49.539] data.CHLH_FadeInType0=0 [2025-09-24 09:59:49.539] data.WU_FadeInDelay=0 [2025-09-24 09:59:49.539] max_time_out=0 [2025-09-24 09:59:49.539] No splash screen [2025-09-24 09:59:49.539] stop dss Done [2025-09-24 09:59:49.587] /dev/mem opened. [2025-09-24 09:59:49.587] Memory mapped at address 0xffffbbb5a000. [2025-09-24 09:59:49.619] Read at address 0x00600018 (0xffffbbb5a018): 0x00000000 [2025-09-24 09:59:49.619] Write at address 0x00600018 (0xffffbbb5a018): 0x00400040, readback 0x00400040 [2025-09-24 09:59:49.619] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 09:59:49.635] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 09:59:49.714] Loaded PowerVR consumer services. [2025-09-24 09:59:49.875] Waiting data available... [2025-09-24 09:59:49.891] 512+0 records in [2025-09-24 09:59:49.891] 512+0 records out [2025-09-24 09:59:49.938] Starting syslogd/klogd: done [2025-09-24 09:59:49.954] DML Start [2025-09-24 09:59:50.162] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 09:59:50.370] DML res1: 0 [2025-09-24 09:59:50.815] Read DML Algo certificate (mtd31) and save to file [2025-09-24 09:59:50.815] Read Success [2025-09-24 09:59:50.815] Verifying certificate... [2025-09-24 09:59:51.070] Verified OK [2025-09-24 09:59:51.086] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 09:59:52.786] Verified OK [2025-09-24 09:59:52.786] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 09:59:53.386] Verified OK [2025-09-24 09:59:53.386] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 09:59:56.055] fs.protected_hardlinks = 1 [2025-09-24 09:59:56.055] fs.protected_symlinks = 1 [2025-09-24 09:59:56.071] kernel.modules_disabled = 1 [2025-09-24 09:59:56.278] [2025-09-24 09:59:56.278] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 09:59:57.431] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:00:05.137] SBL1:1210.0.1.0 [2025-09-24 10:00:05.185] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:00:06.752] SBL2:1210.0.1.0 [2025-09-24 10:00:06.799] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:00:06.911] j-A [2025-09-24 10:00:14.250] The R5 Autosar Classic is running [2025-09-24 10:00:14.275] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:00:14.275] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:00:14.882] INIT: version 2.96 booting [2025-09-24 10:00:14.994] INIT: Entering runlevel: 5 [2025-09-24 10:00:15.154] mtd28 attached [2025-09-24 10:00:15.170] mtd32 attached [2025-09-24 10:00:15.170] mtd24 attached [2025-09-24 10:00:15.186] ubi0:animations is mounted. [2025-09-24 10:00:15.218] RTNETLINK answers: File exists [2025-09-24 10:00:15.279] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:00:15.279] ubi1:dml_code is mounted. [2025-09-24 10:00:15.279] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:00:15.279] ubi2:textures is mounted. [2025-09-24 10:00:15.279] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:00:15.279] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:00:15.279] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:00:15.279] data.LB_FadeInType0=100 [2025-09-24 10:00:15.279] data.CHLH_FadeInType0=0 [2025-09-24 10:00:15.279] data.WU_FadeInDelay=0 [2025-09-24 10:00:15.279] max_time_out=0 [2025-09-24 10:00:15.279] No splash screen [2025-09-24 10:00:15.279] stop dss Done [2025-09-24 10:00:15.326] /dev/mem opened. [2025-09-24 10:00:15.363] Memory mapped at address 0xffff8aae6000. [2025-09-24 10:00:15.363] Read at address 0x00600018 (0xffff8aae6018): 0x00000000 [2025-09-24 10:00:15.363] Write at address 0x00600018 (0xffff8aae6018): 0x00400040, readback 0x00400040 [2025-09-24 10:00:15.363] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:00:15.363] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:00:15.587] Loaded PowerVR consumer services. [2025-09-24 10:00:15.619] Waiting data available... [2025-09-24 10:00:15.650] 512+0 records in [2025-09-24 10:00:15.650] 512+0 records out [2025-09-24 10:00:15.682] Starting syslogd/klogd: done [2025-09-24 10:00:15.698] DML Start [2025-09-24 10:00:15.858] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:00:16.066] DML res1: 0 [2025-09-24 10:00:16.524] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:00:16.524] Read Success [2025-09-24 10:00:16.524] Verifying certificate... [2025-09-24 10:00:16.763] Verified OK [2025-09-24 10:00:16.779] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:00:18.537] Verified OK [2025-09-24 10:00:18.537] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:00:19.112] Verified OK [2025-09-24 10:00:19.112] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:00:21.605] fs.protected_hardlinks = 1 [2025-09-24 10:00:21.605] fs.protected_symlinks = 1 [2025-09-24 10:00:21.621] kernel.modules_disabled = 1 [2025-09-24 10:00:21.797] [2025-09-24 10:00:21.797] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:00:23.115] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:00:30.826] SBL1:1210.0.1.0 [2025-09-24 10:00:30.874] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:00:32.441] SBL2:1210.0.1.0 [2025-09-24 10:00:32.489] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:00:32.601] j-A [2025-09-24 10:00:39.971] The R5 Autosar Classic is running [2025-09-24 10:00:39.971] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:00:39.971] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:00:40.579] INIT: version 2.96 booting [2025-09-24 10:00:40.691] INIT: Entering runlevel: 5 [2025-09-24 10:00:40.851] mtd24 attached [2025-09-24 10:00:40.851] mtd28 attached [2025-09-24 10:00:40.867] mtd32 attached [2025-09-24 10:00:40.915] RTNETLINK answers: File exists [2025-09-24 10:00:40.915] ubi0:textures is mounted. [2025-09-24 10:00:40.979] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:00:40.979] ubi1:animations is mounted. [2025-09-24 10:00:40.979] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:00:40.979] ubi2:dml_code is mounted. [2025-09-24 10:00:40.979] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:00:40.979] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:00:40.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:00:40.979] data.LB_FadeInType0=100 [2025-09-24 10:00:40.979] data.CHLH_FadeInType0=0 [2025-09-24 10:00:40.979] data.WU_FadeInDelay=0 [2025-09-24 10:00:40.979] max_time_out=0 [2025-09-24 10:00:40.979] No splash screen [2025-09-24 10:00:40.979] stop dss Done [2025-09-24 10:00:41.075] /dev/mem opened. [2025-09-24 10:00:41.075] Memory mapped at address 0xffffa5657000. [2025-09-24 10:00:41.075] Read at address 0x00600018 (0xffffa5657018): 0x00000000 [2025-09-24 10:00:41.075] Write at address 0x00600018 (0xffffa5657018): 0x00400040, readback 0x00400040 [2025-09-24 10:00:41.075] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:00:41.075] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:00:41.204] Loaded PowerVR consumer services. [2025-09-24 10:00:41.331] Waiting data available... [2025-09-24 10:00:41.363] 512+0 records in [2025-09-24 10:00:41.363] 512+0 records out [2025-09-24 10:00:41.395] Starting syslogd/klogd: done [2025-09-24 10:00:41.427] DML Start [2025-09-24 10:00:41.588] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:00:41.859] DML res1: 0 [2025-09-24 10:00:42.259] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:00:42.259] Read Success [2025-09-24 10:00:42.275] Verifying certificate... [2025-09-24 10:00:42.514] Verified OK [2025-09-24 10:00:42.530] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:00:44.289] Verified OK [2025-09-24 10:00:44.289] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:00:44.734] Verified OK [2025-09-24 10:00:44.734] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:00:47.115] fs.protected_hardlinks = 1 [2025-09-24 10:00:47.131] fs.protected_symlinks = 1 [2025-09-24 10:00:47.131] kernel.modules_disabled = 1 [2025-09-24 10:00:47.324] [2025-09-24 10:00:47.324] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:00:48.871] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:00:56.547] SBL1:1210.0.1.0 [2025-09-24 10:00:56.595] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:00:58.162] SBL2:1210.0.1.0 [2025-09-24 10:00:58.210] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:00:58.305] j-A [2025-09-24 10:01:05.659] The R5 Autosar Classic is running [2025-09-24 10:01:05.684] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:01:05.684] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:01:06.292] INIT: version 2.96 booting [2025-09-24 10:01:06.403] INIT: Entering runlevel: 5 [2025-09-24 10:01:06.548] mtd28 attached [2025-09-24 10:01:06.563] mtd24 attached [2025-09-24 10:01:06.579] mtd32 attached [2025-09-24 10:01:06.611] ubi0:animations is mounted. [2025-09-24 10:01:06.627] RTNETLINK answers: File exists [2025-09-24 10:01:06.627] ubi1:textures is mounted. [2025-09-24 10:01:06.685] ubi2:dml_code is mounted. [2025-09-24 10:01:06.685] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:01:06.685] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:01:06.685] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:01:06.685] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:01:06.685] data.LB_FadeInType0=100 [2025-09-24 10:01:06.685] data.CHLH_FadeInType0=0 [2025-09-24 10:01:06.685] data.WU_FadeInDelay=0 [2025-09-24 10:01:06.685] max_time_out=0 [2025-09-24 10:01:06.685] No splash screen [2025-09-24 10:01:06.685] stop dss Done [2025-09-24 10:01:06.685] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:01:06.753] /dev/mem opened. [2025-09-24 10:01:06.753] Memory mapped at address 0xffffa30f2000. [2025-09-24 10:01:06.753] Read at address 0x00600018 (0xffffa30f2018): 0x00000000 [2025-09-24 10:01:06.753] Write at address 0x00600018 (0xffffa30f2018): 0x00400040, readback 0x00400040 [2025-09-24 10:01:06.753] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:01:06.769] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:01:06.881] Loaded PowerVR consumer services. [2025-09-24 10:01:07.052] Waiting data available... [2025-09-24 10:01:07.052] 512+0 records in [2025-09-24 10:01:07.052] 512+0 records out [2025-09-24 10:01:07.084] Starting syslogd/klogd: done [2025-09-24 10:01:07.100] DML Start [2025-09-24 10:01:07.260] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:01:07.501] DML res1: 0 [2025-09-24 10:01:07.956] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:01:07.956] Read Success [2025-09-24 10:01:07.956] Verifying certificate... [2025-09-24 10:01:08.212] Verified OK [2025-09-24 10:01:08.228] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:01:09.873] Verified OK [2025-09-24 10:01:09.873] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:01:10.448] Verified OK [2025-09-24 10:01:10.448] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:01:13.023] fs.protected_hardlinks = 1 [2025-09-24 10:01:13.054] fs.protected_symlinks = 1 [2025-09-24 10:01:13.054] kernel.modules_disabled = 1 [2025-09-24 10:01:13.245] [2025-09-24 10:01:13.245] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:01:14.540] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:01:22.256] SBL1:1210.0.1.0 [2025-09-24 10:01:22.304] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:01:23.870] SBL2:1210.0.1.0 [2025-09-24 10:01:23.918] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:01:24.030] j-A [2025-09-24 10:01:31.401] The R5 Autosar Classic is running [2025-09-24 10:01:31.401] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:01:31.401] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:01:32.009] INIT: version 2.96 booting [2025-09-24 10:01:32.120] INIT: Entering runlevel: 5 [2025-09-24 10:01:32.264] mtd32 attached [2025-09-24 10:01:32.280] mtd24 attached [2025-09-24 10:01:32.296] mtd28 attached [2025-09-24 10:01:32.328] ubi0:dml_code is mounted. [2025-09-24 10:01:32.344] RTNETLINK answers: File exists [2025-09-24 10:01:32.395] ubi1:textures is mounted. [2025-09-24 10:01:32.395] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:01:32.395] ubi2:animations is mounted. [2025-09-24 10:01:32.395] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:01:32.395] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:01:32.395] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:01:32.395] data.LB_FadeInType0=100 [2025-09-24 10:01:32.395] data.CHLH_FadeInType0=0 [2025-09-24 10:01:32.395] data.WU_FadeInDelay=0 [2025-09-24 10:01:32.395] max_time_out=0 [2025-09-24 10:01:32.395] No splash screen [2025-09-24 10:01:32.395] stop dss Done [2025-09-24 10:01:32.395] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:01:32.467] /dev/mem opened. [2025-09-24 10:01:32.467] Memory mapped at address 0xffff96517000. [2025-09-24 10:01:32.467] Read at address 0x00600018 (0xffff96517018): 0x00000000 [2025-09-24 10:01:32.467] Write at address 0x00600018 (0xffff96517018): 0x00400040, readback 0x00400040 [2025-09-24 10:01:32.467] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:01:32.467] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:01:32.642] Loaded PowerVR consumer services. [2025-09-24 10:01:32.770] Waiting data available... [2025-09-24 10:01:32.802] 512+0 records in [2025-09-24 10:01:32.802] 512+0 records out [2025-09-24 10:01:32.818] Starting syslogd/klogd: done [2025-09-24 10:01:32.834] DML Start [2025-09-24 10:01:32.994] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:01:33.234] DML res1: 0 [2025-09-24 10:01:33.703] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:01:33.703] Read Success [2025-09-24 10:01:33.703] Verifying certificate... [2025-09-24 10:01:34.006] Verified OK [2025-09-24 10:01:34.070] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:01:35.653] Verified OK [2025-09-24 10:01:35.653] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:01:36.293] Verified OK [2025-09-24 10:01:36.293] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:01:38.851] fs.protected_hardlinks = 1 [2025-09-24 10:01:38.867] fs.protected_symlinks = 1 [2025-09-24 10:01:38.867] kernel.modules_disabled = 1 [2025-09-24 10:01:39.075] [2025-09-24 10:01:39.075] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:01:40.254] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:01:47.972] SBL1:1210.0.1.0 [2025-09-24 10:01:48.020] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:01:49.587] SBL2:1210.0.1.0 [2025-09-24 10:01:49.635] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:01:49.731] j-A [2025-09-24 10:01:57.084] The R5 Autosar Classic is running [2025-09-24 10:01:57.108] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:01:57.108] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:01:57.716] INIT: version 2.96 booting [2025-09-24 10:01:57.828] INIT: Entering runlevel: 5 [2025-09-24 10:01:57.988] mtd28 attached [2025-09-24 10:01:57.988] mtd24 attached [2025-09-24 10:01:58.019] mtd32 attached [2025-09-24 10:01:58.035] ubi0:animations is mounted. [2025-09-24 10:01:58.051] RTNETLINK answers: File exists [2025-09-24 10:01:58.118] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:01:58.118] ubi2:dml_code is mounted. [2025-09-24 10:01:58.118] ubi1:textures is mounted. [2025-09-24 10:01:58.118] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:01:58.118] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:01:58.118] data.LB_FadeInType0=100 [2025-09-24 10:01:58.118] data.CHLH_FadeInType0=0 [2025-09-24 10:01:58.118] data.WU_FadeInDelay=0 [2025-09-24 10:01:58.118] max_time_out=0 [2025-09-24 10:01:58.118] No splash screen [2025-09-24 10:01:58.118] stop dss Done [2025-09-24 10:01:58.118] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:01:58.118] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:01:58.184] /dev/mem opened. [2025-09-24 10:01:58.184] Memory mapped at address 0xffffb2591000. [2025-09-24 10:01:58.184] Read at address 0x00600018 (0xffffb2591018): 0x00000000 [2025-09-24 10:01:58.184] Write at address 0x00600018 (0xffffb2591018): 0x00400040, readback 0x00400040 [2025-09-24 10:01:58.216] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:01:58.232] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:01:58.471] Loaded PowerVR consumer services. [2025-09-24 10:01:58.471] Waiting data available... [2025-09-24 10:01:58.519] 512+0 records in [2025-09-24 10:01:58.519] 512+0 records out [2025-09-24 10:01:58.551] Starting syslogd/klogd: done [2025-09-24 10:01:58.567] DML Start [2025-09-24 10:01:58.759] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:01:58.983] DML res1: 0 [2025-09-24 10:01:59.347] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:01:59.347] Read Success [2025-09-24 10:01:59.347] Verifying certificate... [2025-09-24 10:01:59.587] Verified OK [2025-09-24 10:01:59.603] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:02:01.295] Verified OK [2025-09-24 10:02:01.295] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:02:01.941] Verified OK [2025-09-24 10:02:01.941] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:02:04.531] fs.protected_hardlinks = 1 [2025-09-24 10:02:04.531] fs.protected_symlinks = 1 [2025-09-24 10:02:04.547] kernel.modules_disabled = 1 [2025-09-24 10:02:04.739] [2025-09-24 10:02:04.739] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:02:06.036] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:02:13.690] SBL1:1210.0.1.0 [2025-09-24 10:02:13.738] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:02:15.305] SBL2:1210.0.1.0 [2025-09-24 10:02:15.353] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:02:15.449] j-A [2025-09-24 10:02:22.803] The R5 Autosar Classic is running [2025-09-24 10:02:22.828] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:02:22.828] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:02:23.435] INIT: version 2.96 booting [2025-09-24 10:02:23.547] INIT: Entering runlevel: 5 [2025-09-24 10:02:23.707] mtd28 attached [2025-09-24 10:02:23.723] mtd24 attached [2025-09-24 10:02:23.739] mtd32 attached [2025-09-24 10:02:23.812] RTNETLINK answers: File exists [2025-09-24 10:02:23.812] ubi0:animations is mounted. [2025-09-24 10:02:23.812] ubi1:textures is mounted. [2025-09-24 10:02:23.812] ubi2:dml_code is mounted. [2025-09-24 10:02:23.812] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:02:23.812] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:02:23.812] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:02:23.845] data.LB_FadeInType0=100 [2025-09-24 10:02:23.845] data.CHLH_FadeInType0=0 [2025-09-24 10:02:23.845] data.WU_FadeInDelay=0 [2025-09-24 10:02:23.845] max_time_out=0 [2025-09-24 10:02:23.845] No splash screen [2025-09-24 10:02:23.845] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:02:23.845] stop dss Done [2025-09-24 10:02:23.845] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:02:23.913] /dev/mem opened. [2025-09-24 10:02:23.913] Memory mapped at address 0xffffba6d2000. [2025-09-24 10:02:23.913] Read at address 0x00600018 (0xffffba6d2018): 0x00000000 [2025-09-24 10:02:23.913] Write at address 0x00600018 (0xffffba6d2018): 0x00400040, readback 0x00400040 [2025-09-24 10:02:23.930] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:02:23.946] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:02:24.010] Loaded PowerVR consumer services. [2025-09-24 10:02:24.186] Waiting data available... [2025-09-24 10:02:24.202] 512+0 records in [2025-09-24 10:02:24.202] 512+0 records out [2025-09-24 10:02:24.234] Starting syslogd/klogd: done [2025-09-24 10:02:24.250] DML Start [2025-09-24 10:02:24.410] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:02:24.602] DML res1: 0 [2025-09-24 10:02:25.065] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:02:25.065] Read Success [2025-09-24 10:02:25.081] Verifying certificate... [2025-09-24 10:02:25.321] Verified OK [2025-09-24 10:02:25.353] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:02:27.144] Verified OK [2025-09-24 10:02:27.167] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:02:27.758] Verified OK [2025-09-24 10:02:27.758] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:02:30.284] fs.protected_hardlinks = 1 [2025-09-24 10:02:30.300] fs.protected_symlinks = 1 [2025-09-24 10:02:30.300] kernel.modules_disabled = 1 [2025-09-24 10:02:30.492] [2025-09-24 10:02:30.492] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:02:31.656] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:02:39.398] SBL1:1210.0.1.0 [2025-09-24 10:02:39.446] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:02:41.012] SBL2:1210.0.1.0 [2025-09-24 10:02:41.061] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:02:41.157] j-A [2025-09-24 10:02:48.510] The R5 Autosar Classic is running [2025-09-24 10:02:48.535] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:02:48.535] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:02:49.142] INIT: version 2.96 booting [2025-09-24 10:02:49.255] INIT: Entering runlevel: 5 [2025-09-24 10:02:49.414] mtd24 attached [2025-09-24 10:02:49.430] mtd32 attached [2025-09-24 10:02:49.430] mtd28 attached [2025-09-24 10:02:49.462] ubi0:textures is mounted. [2025-09-24 10:02:49.478] RTNETLINK answers: File exists [2025-09-24 10:02:49.515] ubi1:dml_code is mounted. [2025-09-24 10:02:49.515] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:02:49.515] ubi2:animations is mounted. [2025-09-24 10:02:49.515] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:02:49.515] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:02:49.515] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:02:49.515] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:02:49.537] data.LB_FadeInType0=100 [2025-09-24 10:02:49.537] data.CHLH_FadeInType0=0 [2025-09-24 10:02:49.537] data.WU_FadeInDelay=0 [2025-09-24 10:02:49.537] max_time_out=0 [2025-09-24 10:02:49.537] No splash screen [2025-09-24 10:02:49.537] stop dss Done [2025-09-24 10:02:49.569] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:02:49.569] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:02:49.601] /dev/mem opened. [2025-09-24 10:02:49.601] Memory mapped at address 0xffff86310000. [2025-09-24 10:02:49.627] Read at address 0x00600018 (0xffff86310018): 0x00000000 [2025-09-24 10:02:49.627] Write at address 0x00600018 (0xffff86310018): 0x00400040, readback 0x00400040 [2025-09-24 10:02:49.771] Loaded PowerVR consumer services. [2025-09-24 10:02:49.882] Waiting data available... [2025-09-24 10:02:49.898] 512+0 records in [2025-09-24 10:02:49.898] 512+0 records out [2025-09-24 10:02:49.946] Starting syslogd/klogd: done [2025-09-24 10:02:49.962] DML Start [2025-09-24 10:02:50.122] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:02:50.363] DML res1: 0 [2025-09-24 10:02:50.805] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:02:50.805] Read Success [2025-09-24 10:02:50.805] Verifying certificate... [2025-09-24 10:02:51.029] Verified OK [2025-09-24 10:02:51.045] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:02:52.690] Verified OK [2025-09-24 10:02:52.690] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:02:53.281] Verified OK [2025-09-24 10:02:53.281] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:02:56.032] fs.protected_hardlinks = 1 [2025-09-24 10:02:56.032] fs.protected_symlinks = 1 [2025-09-24 10:02:56.048] kernel.modules_disabled = 1 [2025-09-24 10:02:56.224] [2025-09-24 10:02:56.224] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:02:57.414] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:03:05.114] SBL1:1210.0.1.0 [2025-09-24 10:03:05.146] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:03:06.729] SBL2:1210.0.1.0 [2025-09-24 10:03:06.761] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:03:06.872] j-A [2025-09-24 10:03:14.245] The R5 Autosar Classic is running [2025-09-24 10:03:14.245] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:03:14.245] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:03:14.853] INIT: version 2.96 booting [2025-09-24 10:03:14.964] INIT: Entering runlevel: 5 [2025-09-24 10:03:15.125] mtd32 attached [2025-09-24 10:03:15.141] mtd28 attached [2025-09-24 10:03:15.141] mtd24 attached [2025-09-24 10:03:15.188] RTNETLINK answers: File exists [2025-09-24 10:03:15.253] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:03:15.253] ubi1:animations is mounted. [2025-09-24 10:03:15.253] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:03:15.253] ubi2:textures is mounted. [2025-09-24 10:03:15.253] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:03:15.253] ubi0:dml_code is mounted. [2025-09-24 10:03:15.253] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:03:15.253] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:03:15.253] data.LB_FadeInType0=100 [2025-09-24 10:03:15.253] data.CHLH_FadeInType0=0 [2025-09-24 10:03:15.253] data.WU_FadeInDelay=0 [2025-09-24 10:03:15.253] max_time_out=0 [2025-09-24 10:03:15.253] No splash screen [2025-09-24 10:03:15.253] stop dss Done [2025-09-24 10:03:15.285] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:03:15.301] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:03:15.335] /dev/mem opened. [2025-09-24 10:03:15.335] Memory mapped at address 0xffff89328000. [2025-09-24 10:03:15.335] Read at address 0x00600018 (0xffff89328018): 0x00000000 [2025-09-24 10:03:15.335] Write at address 0x00600018 (0xffff89328018): 0x00400040, readback 0x00400040 [2025-09-24 10:03:15.431] Loaded PowerVR consumer services. [2025-09-24 10:03:15.607] Waiting data available... [2025-09-24 10:03:15.623] 512+0 records in [2025-09-24 10:03:15.639] 512+0 records out [2025-09-24 10:03:15.655] Starting syslogd/klogd: done [2025-09-24 10:03:15.671] DML Start [2025-09-24 10:03:15.815] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:03:16.007] DML res1: 0 [2025-09-24 10:03:16.578] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:03:16.578] Read Success [2025-09-24 10:03:16.578] Verifying certificate... [2025-09-24 10:03:16.898] Verified OK [2025-09-24 10:03:16.929] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:03:18.558] Verified OK [2025-09-24 10:03:18.558] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:03:19.143] Verified OK [2025-09-24 10:03:19.143] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:03:21.717] fs.protected_hardlinks = 1 [2025-09-24 10:03:21.717] fs.protected_symlinks = 1 [2025-09-24 10:03:21.733] kernel.modules_disabled = 1 [2025-09-24 10:03:21.940] [2025-09-24 10:03:21.940] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:03:23.099] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:03:30.819] SBL1:1210.0.1.0 [2025-09-24 10:03:30.851] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:03:32.433] SBL2:1210.0.1.0 [2025-09-24 10:03:32.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:03:32.577] j-A [2025-09-24 10:03:39.930] The R5 Autosar Classic is running [2025-09-24 10:03:39.930] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:03:39.951] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:03:40.559] INIT: version 2.96 booting [2025-09-24 10:03:40.671] INIT: Entering runlevel: 5 [2025-09-24 10:03:40.831] mtd32 attached [2025-09-24 10:03:40.831] mtd24 attached [2025-09-24 10:03:40.847] mtd28 attached [2025-09-24 10:03:40.878] ubi0:dml_code is mounted. [2025-09-24 10:03:40.894] RTNETLINK answers: File exists [2025-09-24 10:03:40.894] ubi1:textures is mounted. [2025-09-24 10:03:40.940] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:03:40.940] ubi2:animations is mounted. [2025-09-24 10:03:40.940] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:03:40.940] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:03:40.940] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:03:40.940] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:03:40.940] data.LB_FadeInType0=100 [2025-09-24 10:03:40.961] data.CHLH_FadeInType0=0 [2025-09-24 10:03:40.961] data.WU_FadeInDelay=0 [2025-09-24 10:03:40.961] max_time_out=0 [2025-09-24 10:03:40.961] No splash screen [2025-09-24 10:03:40.961] stop dss Done [2025-09-24 10:03:41.009] /dev/mem opened. [2025-09-24 10:03:41.009] Memory mapped at address 0xffffafa58000. [2025-09-24 10:03:41.042] Read at address 0x00600018 (0xffffafa58018): 0x00000000 [2025-09-24 10:03:41.042] Write at address 0x00600018 (0xffffafa58018): 0x00400040, readback 0x00400040 [2025-09-24 10:03:41.042] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:03:41.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:03:41.311] Loaded PowerVR consumer services. [2025-09-24 10:03:41.311] Waiting data available... [2025-09-24 10:03:41.327] 512+0 records in [2025-09-24 10:03:41.327] 512+0 records out [2025-09-24 10:03:41.359] Starting syslogd/klogd: done [2025-09-24 10:03:41.375] DML Start [2025-09-24 10:03:41.583] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:03:41.806] DML res1: 0 [2025-09-24 10:03:42.188] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:03:42.188] Read Success [2025-09-24 10:03:42.188] Verifying certificate... [2025-09-24 10:03:42.428] Verified OK [2025-09-24 10:03:42.444] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:03:44.069] Verified OK [2025-09-24 10:03:44.069] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:03:44.582] Verified OK [2025-09-24 10:03:44.582] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:03:47.283] fs.protected_hardlinks = 1 [2025-09-24 10:03:47.299] fs.protected_symlinks = 1 [2025-09-24 10:03:47.299] kernel.modules_disabled = 1 [2025-09-24 10:03:47.491] [2025-09-24 10:03:47.491] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:03:48.809] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:03:56.521] SBL1:1210.0.1.0 [2025-09-24 10:03:56.553] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:03:58.136] SBL2:1210.0.1.0 [2025-09-24 10:03:58.167] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:03:58.280] j-A [2025-09-24 10:04:05.633] The R5 Autosar Classic is running [2025-09-24 10:04:05.654] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:04:05.654] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:04:06.261] INIT: version 2.96 booting [2025-09-24 10:04:06.373] INIT: Entering runlevel: 5 [2025-09-24 10:04:06.517] mtd28 attached [2025-09-24 10:04:06.533] mtd32 attached [2025-09-24 10:04:06.549] mtd24 attached [2025-09-24 10:04:06.652] ubi0:animations is mounted. [2025-09-24 10:04:06.652] RTNETLINK answers: File exists [2025-09-24 10:04:06.652] ubi1:dml_code is mounted. [2025-09-24 10:04:06.652] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:04:06.652] ubi2:textures is mounted. [2025-09-24 10:04:06.652] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:04:06.652] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:04:06.652] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:04:06.652] data.LB_FadeInType0=100 [2025-09-24 10:04:06.652] data.CHLH_FadeInType0=0 [2025-09-24 10:04:06.652] data.WU_FadeInDelay=0 [2025-09-24 10:04:06.652] max_time_out=0 [2025-09-24 10:04:06.652] No splash screen [2025-09-24 10:04:06.652] stop dss Done [2025-09-24 10:04:06.652] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:04:06.724] /dev/mem opened. [2025-09-24 10:04:06.724] Memory mapped at address 0xffff9f531000. [2025-09-24 10:04:06.724] Read at address 0x00600018 (0xffff9f531018): 0x00000000 [2025-09-24 10:04:06.724] Write at address 0x00600018 (0xffff9f531018): 0x00400040, readback 0x00400040 [2025-09-24 10:04:06.724] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:04:06.755] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:04:06.963] Loaded PowerVR consumer services. [2025-09-24 10:04:07.027] Waiting data available... [2025-09-24 10:04:07.059] 512+0 records in [2025-09-24 10:04:07.059] 512+0 records out [2025-09-24 10:04:07.091] Starting syslogd/klogd: done [2025-09-24 10:04:07.107] DML Start [2025-09-24 10:04:07.266] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:04:07.459] DML res1: 0 [2025-09-24 10:04:07.949] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:04:07.949] Read Success [2025-09-24 10:04:07.949] Verifying certificate... [2025-09-24 10:04:08.189] Verified OK [2025-09-24 10:04:08.205] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:04:09.863] Verified OK [2025-09-24 10:04:09.863] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:04:10.481] Verified OK [2025-09-24 10:04:10.481] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:04:13.039] fs.protected_hardlinks = 1 [2025-09-24 10:04:13.040] fs.protected_symlinks = 1 [2025-09-24 10:04:13.040] kernel.modules_disabled = 1 [2025-09-24 10:04:13.247] [2025-09-24 10:04:13.247] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:04:14.566] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:04:22.211] SBL1:1210.0.1.0 [2025-09-24 10:04:22.259] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:04:23.825] SBL2:1210.0.1.0 [2025-09-24 10:04:23.873] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:04:23.969] j-A [2025-09-24 10:04:31.323] The R5 Autosar Classic is running [2025-09-24 10:04:31.348] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:04:31.348] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:04:31.955] INIT: version 2.96 booting [2025-09-24 10:04:32.067] INIT: Entering runlevel: 5 [2025-09-24 10:04:32.227] mtd24 attached [2025-09-24 10:04:32.227] mtd32 attached [2025-09-24 10:04:32.243] mtd28 attached [2025-09-24 10:04:32.290] RTNETLINK answers: File exists [2025-09-24 10:04:32.352] ubi0:textures is mounted. [2025-09-24 10:04:32.352] ubi1:dml_code is mounted. [2025-09-24 10:04:32.352] ubi2:animations is mounted. [2025-09-24 10:04:32.352] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:04:32.352] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:04:32.352] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:04:32.352] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:04:32.352] data.LB_FadeInType0=100 [2025-09-24 10:04:32.352] data.CHLH_FadeInType0=0 [2025-09-24 10:04:32.352] data.WU_FadeInDelay=0 [2025-09-24 10:04:32.352] max_time_out=0 [2025-09-24 10:04:32.352] No splash screen [2025-09-24 10:04:32.352] stop dss Done [2025-09-24 10:04:32.352] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:04:32.434] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:04:32.434] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:04:32.434] /dev/mem opened. [2025-09-24 10:04:32.434] Memory mapped at address 0xffffa8abf000. [2025-09-24 10:04:32.434] Read at address 0x00600018 (0xffffa8abf018): 0x00000000 [2025-09-24 10:04:32.434] Write at address 0x00600018 (0xffffa8abf018): 0x00400040, readback 0x00400040 [2025-09-24 10:04:32.577] Loaded PowerVR consumer services. [2025-09-24 10:04:32.705] Waiting data available... [2025-09-24 10:04:32.721] 512+0 records in [2025-09-24 10:04:32.721] 512+0 records out [2025-09-24 10:04:32.753] Starting syslogd/klogd: done [2025-09-24 10:04:32.769] DML Start [2025-09-24 10:04:32.929] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:04:33.120] DML res1: 0 [2025-09-24 10:04:33.633] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:04:33.653] Read Success [2025-09-24 10:04:33.653] Verifying certificate... [2025-09-24 10:04:33.893] Verified OK [2025-09-24 10:04:33.909] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:04:35.403] Verified OK [2025-09-24 10:04:35.403] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:04:35.921] Verified OK [2025-09-24 10:04:35.921] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:04:38.799] fs.protected_hardlinks = 1 [2025-09-24 10:04:38.815] fs.protected_symlinks = 1 [2025-09-24 10:04:38.815] kernel.modules_disabled = 1 [2025-09-24 10:04:39.023] [2025-09-24 10:04:39.023] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:04:40.182] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:04:47.922] SBL1:1210.0.1.0 [2025-09-24 10:04:47.954] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:04:49.537] SBL2:1210.0.1.0 [2025-09-24 10:04:49.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:04:49.681] j-A [2025-09-24 10:04:57.035] The R5 Autosar Classic is running [2025-09-24 10:04:57.035] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:04:57.056] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:04:57.663] INIT: version 2.96 booting [2025-09-24 10:04:57.775] INIT: Entering runlevel: 5 [2025-09-24 10:04:57.935] mtd32 attached [2025-09-24 10:04:57.935] mtd24 attached [2025-09-24 10:04:57.967] mtd28 attached [2025-09-24 10:04:58.040] ubi0:dml_code is mounted. [2025-09-24 10:04:58.040] RTNETLINK answers: File exists [2025-09-24 10:04:58.040] ubi1:textures is mounted. [2025-09-24 10:04:58.040] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:04:58.040] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:04:58.040] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:04:58.040] ubi2:animations is mounted. [2025-09-24 10:04:58.040] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:04:58.040] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:04:58.065] data.LB_FadeInType0=100 [2025-09-24 10:04:58.065] data.CHLH_FadeInType0=0 [2025-09-24 10:04:58.065] data.WU_FadeInDelay=0 [2025-09-24 10:04:58.065] max_time_out=0 [2025-09-24 10:04:58.065] No splash screen [2025-09-24 10:04:58.065] stop dss Done [2025-09-24 10:04:58.095] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:04:58.095] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:04:58.111] /dev/mem opened. [2025-09-24 10:04:58.111] Memory mapped at address 0xffff89abe000. [2025-09-24 10:04:58.137] Read at address 0x00600018 (0xffff89abe018): 0x00000000 [2025-09-24 10:04:58.137] Write at address 0x00600018 (0xffff89abe018): 0x00400040, readback 0x00400040 [2025-09-24 10:04:58.233] Loaded PowerVR consumer services. [2025-09-24 10:04:58.408] Waiting data available... [2025-09-24 10:04:58.456] 512+0 records in [2025-09-24 10:04:58.456] 512+0 records out [2025-09-24 10:04:58.489] Starting syslogd/klogd: done [2025-09-24 10:04:58.505] DML Start [2025-09-24 10:04:58.696] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:04:58.936] DML res1: 0 [2025-09-24 10:04:59.303] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:04:59.319] Read Success [2025-09-24 10:04:59.319] Verifying certificate... [2025-09-24 10:04:59.575] Verified OK [2025-09-24 10:04:59.591] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:05:01.282] Verified OK [2025-09-24 10:05:01.282] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:05:01.931] Verified OK [2025-09-24 10:05:01.931] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:05:04.502] fs.protected_hardlinks = 1 [2025-09-24 10:05:04.502] fs.protected_symlinks = 1 [2025-09-24 10:05:04.502] kernel.modules_disabled = 1 [2025-09-24 10:05:04.678] [2025-09-24 10:05:04.678] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:05:05.988] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:05:13.629] SBL1:1210.0.1.0 [2025-09-24 10:05:13.677] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:05:15.243] SBL2:1210.0.1.0 [2025-09-24 10:05:15.291] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:05:15.387] j-A [2025-09-24 10:05:22.741] The R5 Autosar Classic is running [2025-09-24 10:05:22.765] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:05:22.765] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:05:23.372] INIT: version 2.96 booting [2025-09-24 10:05:23.485] INIT: Entering runlevel: 5 [2025-09-24 10:05:23.628] mtd24 attached [2025-09-24 10:05:23.644] mtd28 attached [2025-09-24 10:05:23.660] mtd32 attached [2025-09-24 10:05:23.709] ubi0:textures is mounted. [2025-09-24 10:05:23.709] RTNETLINK answers: File exists [2025-09-24 10:05:23.746] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:05:23.746] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:05:23.746] ubi1:animations is mounted. [2025-09-24 10:05:23.746] ubi2:dml_code is mounted. [2025-09-24 10:05:23.746] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:05:23.746] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:05:23.746] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:05:23.767] data.LB_FadeInType0=100 [2025-09-24 10:05:23.767] data.CHLH_FadeInType0=0 [2025-09-24 10:05:23.767] data.WU_FadeInDelay=0 [2025-09-24 10:05:23.767] max_time_out=0 [2025-09-24 10:05:23.767] No splash screen [2025-09-24 10:05:23.767] stop dss Done [2025-09-24 10:05:23.814] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:05:23.859] /dev/mem opened. [2025-09-24 10:05:23.859] Memory mapped at address 0xffffaab09000. [2025-09-24 10:05:23.859] Read at address 0x00600018 (0xffffaab09018): 0x00000000 [2025-09-24 10:05:23.859] Write at address 0x00600018 (0xffffaab09018): 0x00400040, readback 0x00400040 [2025-09-24 10:05:23.859] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:05:23.940] Loaded PowerVR consumer services. [2025-09-24 10:05:24.099] Waiting data available... [2025-09-24 10:05:24.131] 512+0 records in [2025-09-24 10:05:24.131] 512+0 records out [2025-09-24 10:05:24.179] Starting syslogd/klogd: done [2025-09-24 10:05:24.195] DML Start [2025-09-24 10:05:24.371] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:05:24.594] DML res1: 0 [2025-09-24 10:05:25.074] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:05:25.095] Read Success [2025-09-24 10:05:25.095] Verifying certificate... [2025-09-24 10:05:25.335] Verified OK [2025-09-24 10:05:25.335] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:05:26.997] Verified OK [2025-09-24 10:05:27.014] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:05:27.612] Verified OK [2025-09-24 10:05:27.612] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:05:30.298] fs.protected_hardlinks = 1 [2025-09-24 10:05:30.314] fs.protected_symlinks = 1 [2025-09-24 10:05:30.314] kernel.modules_disabled = 1 [2025-09-24 10:05:30.505] [2025-09-24 10:05:30.505] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:05:31.616] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:05:39.346] SBL1:1210.0.1.0 [2025-09-24 10:05:39.394] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:05:40.961] SBL2:1210.0.1.0 [2025-09-24 10:05:41.008] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:05:41.104] j-A [2025-09-24 10:05:48.459] The R5 Autosar Classic is running [2025-09-24 10:05:48.484] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:05:48.484] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:05:49.091] INIT: version 2.96 booting [2025-09-24 10:05:49.203] INIT: Entering runlevel: 5 [2025-09-24 10:05:49.363] mtd28 attached [2025-09-24 10:05:49.363] mtd24 attached [2025-09-24 10:05:49.379] mtd32 attached [2025-09-24 10:05:49.411] ubi1:textures is mounted. [2025-09-24 10:05:49.426] RTNETLINK answers: File exists [2025-09-24 10:05:49.488] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:05:49.488] ubi2:dml_code is mounted. [2025-09-24 10:05:49.488] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:05:49.488] ubi0:animations is mounted. [2025-09-24 10:05:49.488] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:05:49.488] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:05:49.488] data.LB_FadeInType0=100 [2025-09-24 10:05:49.488] data.CHLH_FadeInType0=0 [2025-09-24 10:05:49.488] data.WU_FadeInDelay=0 [2025-09-24 10:05:49.488] max_time_out=0 [2025-09-24 10:05:49.488] No splash screen [2025-09-24 10:05:49.488] stop dss Done [2025-09-24 10:05:49.488] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:05:49.564] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:05:49.564] /dev/mem opened. [2025-09-24 10:05:49.564] Memory mapped at address 0xffff865b5000. [2025-09-24 10:05:49.564] Read at address 0x00600018 (0xffff865b5018): 0x00000000 [2025-09-24 10:05:49.564] Write at address 0x00600018 (0xffff865b5018): 0x00400040, readback 0x00400040 [2025-09-24 10:05:49.564] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:05:49.676] Loaded PowerVR consumer services. [2025-09-24 10:05:49.835] Waiting data available... [2025-09-24 10:05:49.851] 512+0 records in [2025-09-24 10:05:49.851] 512+0 records out [2025-09-24 10:05:49.884] Starting syslogd/klogd: done [2025-09-24 10:05:49.900] DML Start [2025-09-24 10:05:50.107] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:05:50.315] DML res1: 0 [2025-09-24 10:05:50.792] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:05:50.792] Read Success [2025-09-24 10:05:50.792] Verifying certificate... [2025-09-24 10:05:51.063] Verified OK [2025-09-24 10:05:51.079] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:05:52.642] Verified OK [2025-09-24 10:05:52.642] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:05:53.202] Verified OK [2025-09-24 10:05:53.202] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:05:55.968] fs.protected_hardlinks = 1 [2025-09-24 10:05:55.968] fs.protected_symlinks = 1 [2025-09-24 10:05:55.984] kernel.modules_disabled = 1 [2025-09-24 10:05:56.176] [2025-09-24 10:05:56.176] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:05:57.320] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:06:05.062] SBL1:1210.0.1.0 [2025-09-24 10:06:05.110] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:06:06.676] SBL2:1210.0.1.0 [2025-09-24 10:06:06.723] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:06:06.819] j-A [2025-09-24 10:06:14.174] The R5 Autosar Classic is running [2025-09-24 10:06:14.199] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:06:14.199] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:06:14.806] INIT: version 2.96 booting [2025-09-24 10:06:14.919] INIT: Entering runlevel: 5 [2025-09-24 10:06:15.078] mtd28 attached [2025-09-24 10:06:15.078] mtd24 attached [2025-09-24 10:06:15.095] mtd32 attached [2025-09-24 10:06:15.211] RTNETLINK answers: File exists [2025-09-24 10:06:15.211] ubi0:animations is mounted. [2025-09-24 10:06:15.211] ubi1:textures is mounted. [2025-09-24 10:06:15.211] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:06:15.211] ubi2:dml_code is mounted. [2025-09-24 10:06:15.211] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:06:15.211] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:06:15.211] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:06:15.211] data.LB_FadeInType0=100 [2025-09-24 10:06:15.211] data.CHLH_FadeInType0=0 [2025-09-24 10:06:15.211] data.WU_FadeInDelay=0 [2025-09-24 10:06:15.211] max_time_out=0 [2025-09-24 10:06:15.211] No splash screen [2025-09-24 10:06:15.211] stop dss Done [2025-09-24 10:06:15.211] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:06:15.277] /dev/mem opened. [2025-09-24 10:06:15.277] Memory mapped at address 0xffff9a181000. [2025-09-24 10:06:15.277] Read at address 0x00600018 (0xffff9a181018): 0x00000000 [2025-09-24 10:06:15.277] Write at address 0x00600018 (0xffff9a181018): 0x00400040, readback 0x00400040 [2025-09-24 10:06:15.277] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:06:15.277] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:06:15.485] Loaded PowerVR consumer services. [2025-09-24 10:06:15.597] Waiting data available... [2025-09-24 10:06:15.612] 512+0 records in [2025-09-24 10:06:15.612] 512+0 records out [2025-09-24 10:06:15.645] Starting syslogd/klogd: done [2025-09-24 10:06:15.661] DML Start [2025-09-24 10:06:15.869] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:06:16.092] DML res1: 0 [2025-09-24 10:06:16.453] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:06:16.453] Read Success [2025-09-24 10:06:16.453] Verifying certificate... [2025-09-24 10:06:16.677] Verified OK [2025-09-24 10:06:16.677] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:06:18.324] Verified OK [2025-09-24 10:06:18.324] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:06:18.972] Verified OK [2025-09-24 10:06:18.972] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:06:21.545] fs.protected_hardlinks = 1 [2025-09-24 10:06:21.561] fs.protected_symlinks = 1 [2025-09-24 10:06:21.561] kernel.modules_disabled = 1 [2025-09-24 10:06:21.769] [2025-09-24 10:06:21.769] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:06:23.125] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:06:30.766] SBL1:1210.0.1.0 [2025-09-24 10:06:30.798] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:06:32.382] SBL2:1210.0.1.0 [2025-09-24 10:06:32.414] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:06:32.525] j-A [2025-09-24 10:06:39.899] The R5 Autosar Classic is running [2025-09-24 10:06:39.899] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:06:39.899] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:06:40.507] INIT: version 2.96 booting [2025-09-24 10:06:40.618] INIT: Entering runlevel: 5 [2025-09-24 10:06:40.763] mtd24 attached [2025-09-24 10:06:40.779] mtd32 attached [2025-09-24 10:06:40.795] mtd28 attached [2025-09-24 10:06:40.842] ubi0:textures is mounted. [2025-09-24 10:06:40.842] RTNETLINK answers: File exists [2025-09-24 10:06:40.898] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:06:40.898] ubi1:dml_code is mounted. [2025-09-24 10:06:40.898] ubi2:animations is mounted. [2025-09-24 10:06:40.898] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:06:40.898] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:06:40.898] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:06:40.898] data.LB_FadeInType0=100 [2025-09-24 10:06:40.898] data.CHLH_FadeInType0=0 [2025-09-24 10:06:40.898] data.WU_FadeInDelay=0 [2025-09-24 10:06:40.898] max_time_out=0 [2025-09-24 10:06:40.898] No splash screen [2025-09-24 10:06:40.898] stop dss Done [2025-09-24 10:06:40.898] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:06:40.946] /dev/mem opened. [2025-09-24 10:06:40.972] Memory mapped at address 0xffffb1c3c000. [2025-09-24 10:06:40.972] Read at address 0x00600018 (0xffffb1c3c018): 0x00000000 [2025-09-24 10:06:40.972] Write at address 0x00600018 (0xffffb1c3c018): 0x00400040, readback 0x00400040 [2025-09-24 10:06:41.004] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:06:41.004] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:06:41.100] Loaded PowerVR consumer services. [2025-09-24 10:06:41.243] Waiting data available... [2025-09-24 10:06:41.259] 512+0 records in [2025-09-24 10:06:41.259] 512+0 records out [2025-09-24 10:06:41.308] Starting syslogd/klogd: done [2025-09-24 10:06:41.324] DML Start [2025-09-24 10:06:41.516] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:06:41.756] DML res1: 0 [2025-09-24 10:06:42.140] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:06:42.160] Read Success [2025-09-24 10:06:42.161] Verifying certificate... [2025-09-24 10:06:42.385] Verified OK [2025-09-24 10:06:42.400] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:06:44.104] Verified OK [2025-09-24 10:06:44.104] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:06:44.680] Verified OK [2025-09-24 10:06:44.680] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:06:47.285] fs.protected_hardlinks = 1 [2025-09-24 10:06:47.285] fs.protected_symlinks = 1 [2025-09-24 10:06:47.301] kernel.modules_disabled = 1 [2025-09-24 10:06:47.493] [2025-09-24 10:06:47.493] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:06:48.755] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:06:56.457] SBL1:1210.0.1.0 [2025-09-24 10:06:56.505] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:06:58.072] SBL2:1210.0.1.0 [2025-09-24 10:06:58.120] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:06:58.232] j-A [2025-09-24 10:07:05.601] The R5 Autosar Classic is running [2025-09-24 10:07:05.601] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:07:05.601] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:07:06.208] INIT: version 2.96 booting [2025-09-24 10:07:06.320] INIT: Entering runlevel: 5 [2025-09-24 10:07:06.481] mtd28 attached [2025-09-24 10:07:06.481] mtd24 attached [2025-09-24 10:07:06.512] mtd32 attached [2025-09-24 10:07:06.528] ubi0:animations is mounted. [2025-09-24 10:07:06.544] RTNETLINK answers: File exists [2025-09-24 10:07:06.544] ubi1:textures is mounted. [2025-09-24 10:07:06.605] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:07:06.605] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:07:06.605] ubi2:dml_code is mounted. [2025-09-24 10:07:06.605] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:07:06.605] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:07:06.605] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:07:06.605] data.LB_FadeInType0=100 [2025-09-24 10:07:06.605] data.CHLH_FadeInType0=0 [2025-09-24 10:07:06.605] data.WU_FadeInDelay=0 [2025-09-24 10:07:06.605] max_time_out=0 [2025-09-24 10:07:06.605] No splash screen [2025-09-24 10:07:06.605] stop dss Done [2025-09-24 10:07:06.621] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:07:06.643] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:07:06.643] /dev/mem opened. [2025-09-24 10:07:06.643] Memory mapped at address 0xffffbcb7b000. [2025-09-24 10:07:06.669] Read at address 0x00600018 (0xffffbcb7b018): 0x00000000 [2025-09-24 10:07:06.669] Write at address 0x00600018 (0xffffbcb7b018): 0x00400040, readback 0x00400040 [2025-09-24 10:07:06.876] Loaded PowerVR consumer services. [2025-09-24 10:07:06.973] Waiting data available... [2025-09-24 10:07:06.989] 512+0 records in [2025-09-24 10:07:06.989] 512+0 records out [2025-09-24 10:07:07.021] Starting syslogd/klogd: done [2025-09-24 10:07:07.037] DML Start [2025-09-24 10:07:07.229] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:07:07.484] DML res1: 0 [2025-09-24 10:07:07.818] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:07:07.818] Read Success [2025-09-24 10:07:07.818] Verifying certificate... [2025-09-24 10:07:08.073] Verified OK [2025-09-24 10:07:08.089] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:07:09.764] Verified OK [2025-09-24 10:07:09.764] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:07:10.398] Verified OK [2025-09-24 10:07:10.398] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:07:12.955] fs.protected_hardlinks = 1 [2025-09-24 10:07:12.955] fs.protected_symlinks = 1 [2025-09-24 10:07:12.971] kernel.modules_disabled = 1 [2025-09-24 10:07:13.163] [2025-09-24 10:07:13.163] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:07:14.513] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:07:22.188] SBL1:1210.0.1.0 [2025-09-24 10:07:22.236] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:07:23.802] SBL2:1210.0.1.0 [2025-09-24 10:07:23.850] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:07:23.963] j-A [2025-09-24 10:07:31.333] The R5 Autosar Classic is running [2025-09-24 10:07:31.333] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:07:31.333] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:07:31.941] INIT: version 2.96 booting [2025-09-24 10:07:32.052] INIT: Entering runlevel: 5 [2025-09-24 10:07:32.212] mtd32 attached [2025-09-24 10:07:32.213] mtd24 attached [2025-09-24 10:07:32.229] mtd28 attached [2025-09-24 10:07:32.276] ubi0:dml_code is mounted. [2025-09-24 10:07:32.276] RTNETLINK answers: File exists [2025-09-24 10:07:32.313] ubi1:textures is mounted. [2025-09-24 10:07:32.313] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:07:32.313] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:07:32.313] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:07:32.313] ubi2:animations is mounted. [2025-09-24 10:07:32.313] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:07:32.313] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:07:32.337] data.LB_FadeInType0=100 [2025-09-24 10:07:32.337] data.CHLH_FadeInType0=0 [2025-09-24 10:07:32.337] data.WU_FadeInDelay=0 [2025-09-24 10:07:32.337] max_time_out=0 [2025-09-24 10:07:32.337] No splash screen [2025-09-24 10:07:32.337] stop dss Done [2025-09-24 10:07:32.369] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:07:32.413] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:07:32.413] /dev/mem opened. [2025-09-24 10:07:32.413] Memory mapped at address 0xffffbc5ff000. [2025-09-24 10:07:32.413] Read at address 0x00600018 (0xffffbc5ff018): 0x00000000 [2025-09-24 10:07:32.413] Write at address 0x00600018 (0xffffbc5ff018): 0x00400040, readback 0x00400040 [2025-09-24 10:07:32.682] Loaded PowerVR consumer services. [2025-09-24 10:07:32.682] Waiting data available... [2025-09-24 10:07:32.714] 512+0 records in [2025-09-24 10:07:32.714] 512+0 records out [2025-09-24 10:07:32.730] Starting syslogd/klogd: done [2025-09-24 10:07:32.746] DML Start [2025-09-24 10:07:32.906] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:07:33.097] DML res1: 0 [2025-09-24 10:07:33.605] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:07:33.605] Read Success [2025-09-24 10:07:33.605] Verifying certificate... [2025-09-24 10:07:33.860] Verified OK [2025-09-24 10:07:33.860] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:07:35.440] Verified OK [2025-09-24 10:07:35.440] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:07:36.031] Verified OK [2025-09-24 10:07:36.031] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:07:38.877] fs.protected_hardlinks = 1 [2025-09-24 10:07:38.877] fs.protected_symlinks = 1 [2025-09-24 10:07:38.893] kernel.modules_disabled = 1 [2025-09-24 10:07:39.068] [2025-09-24 10:07:39.068] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:07:40.171] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:07:47.896] SBL1:1210.0.1.0 [2025-09-24 10:07:47.944] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:07:49.511] SBL2:1210.0.1.0 [2025-09-24 10:07:49.558] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:07:49.654] j-A [2025-09-24 10:07:57.009] The R5 Autosar Classic is running [2025-09-24 10:07:57.034] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:07:57.034] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:07:57.641] INIT: version 2.96 booting [2025-09-24 10:07:57.753] INIT: Entering runlevel: 5 [2025-09-24 10:07:57.897] mtd28 attached [2025-09-24 10:07:57.913] mtd32 attached [2025-09-24 10:07:57.929] mtd24 attached [2025-09-24 10:07:57.977] RTNETLINK answers: File exists [2025-09-24 10:07:57.977] ubi0:animations is mounted. [2025-09-24 10:07:58.012] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:07:58.012] ubi2:textures is mounted. [2025-09-24 10:07:58.012] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:07:58.012] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:07:58.012] ubi1:dml_code is mounted. [2025-09-24 10:07:58.012] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:07:58.012] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:07:58.038] data.LB_FadeInType0=100 [2025-09-24 10:07:58.038] data.CHLH_FadeInType0=0 [2025-09-24 10:07:58.038] data.WU_FadeInDelay=0 [2025-09-24 10:07:58.038] max_time_out=0 [2025-09-24 10:07:58.038] No splash screen [2025-09-24 10:07:58.038] stop dss Done [2025-09-24 10:07:58.087] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:07:58.123] /dev/mem opened. [2025-09-24 10:07:58.123] Memory mapped at address 0xffffa82fe000. [2025-09-24 10:07:58.123] Read at address 0x00600018 (0xffffa82fe018): 0x00000000 [2025-09-24 10:07:58.123] Write at address 0x00600018 (0xffffa82fe018): 0x00400040, readback 0x00400040 [2025-09-24 10:07:58.123] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:07:58.218] Loaded PowerVR consumer services. [2025-09-24 10:07:58.395] Waiting data available... [2025-09-24 10:07:58.410] 512+0 records in [2025-09-24 10:07:58.426] 512+0 records out [2025-09-24 10:07:58.442] Starting syslogd/klogd: done [2025-09-24 10:07:58.458] DML Start [2025-09-24 10:07:58.651] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:07:58.906] DML res1: 0 [2025-09-24 10:07:59.274] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:07:59.290] Read Success [2025-09-24 10:07:59.290] Verifying certificate... [2025-09-24 10:07:59.530] Verified OK [2025-09-24 10:07:59.546] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:08:01.012] Verified OK [2025-09-24 10:08:01.012] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:08:01.668] Verified OK [2025-09-24 10:08:01.668] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:08:04.495] fs.protected_hardlinks = 1 [2025-09-24 10:08:04.495] fs.protected_symlinks = 1 [2025-09-24 10:08:04.495] kernel.modules_disabled = 1 [2025-09-24 10:08:04.670] [2025-09-24 10:08:04.670] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:08:05.916] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:08:13.622] SBL1:1210.0.1.0 [2025-09-24 10:08:13.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:08:15.236] SBL2:1210.0.1.0 [2025-09-24 10:08:15.284] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:08:15.379] j-A [2025-09-24 10:08:22.734] The R5 Autosar Classic is running [2025-09-24 10:08:22.755] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:08:22.755] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:08:23.363] INIT: version 2.96 booting [2025-09-24 10:08:23.475] INIT: Entering runlevel: 5 [2025-09-24 10:08:23.635] mtd32 attached [2025-09-24 10:08:23.635] mtd24 attached [2025-09-24 10:08:23.651] mtd28 attached [2025-09-24 10:08:23.757] ubi0:dml_code is mounted. [2025-09-24 10:08:23.757] RTNETLINK answers: File exists [2025-09-24 10:08:23.757] ubi1:textures is mounted. [2025-09-24 10:08:23.757] ubi2:animations is mounted. [2025-09-24 10:08:23.757] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:08:23.757] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:08:23.757] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:08:23.757] data.LB_FadeInType0=100 [2025-09-24 10:08:23.757] data.CHLH_FadeInType0=0 [2025-09-24 10:08:23.757] data.WU_FadeInDelay=0 [2025-09-24 10:08:23.757] max_time_out=0 [2025-09-24 10:08:23.757] No splash screen [2025-09-24 10:08:23.757] stop dss Done [2025-09-24 10:08:23.757] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:08:23.757] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:08:23.805] /dev/mem opened. [2025-09-24 10:08:23.849] Memory mapped at address 0xffff95501000. [2025-09-24 10:08:23.849] Read at address 0x00600018 (0xffff95501018): 0x00000000 [2025-09-24 10:08:23.849] Write at address 0x00600018 (0xffff95501018): 0x00400040, readback 0x00400040 [2025-09-24 10:08:23.849] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:08:23.849] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:08:23.992] Loaded PowerVR consumer services. [2025-09-24 10:08:24.105] Waiting data available... [2025-09-24 10:08:24.120] 512+0 records in [2025-09-24 10:08:24.120] 512+0 records out [2025-09-24 10:08:24.184] Starting syslogd/klogd: done [2025-09-24 10:08:24.200] DML Start [2025-09-24 10:08:24.345] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:08:24.504] DML res1: 0 [2025-09-24 10:08:25.096] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:08:25.096] Read Success [2025-09-24 10:08:25.112] Verifying certificate... [2025-09-24 10:08:25.352] Verified OK [2025-09-24 10:08:25.368] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:08:27.110] Verified OK [2025-09-24 10:08:27.110] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:08:27.597] Verified OK [2025-09-24 10:08:27.597] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:08:30.107] fs.protected_hardlinks = 1 [2025-09-24 10:08:30.138] fs.protected_symlinks = 1 [2025-09-24 10:08:30.138] kernel.modules_disabled = 1 [2025-09-24 10:08:30.331] [2025-09-24 10:08:30.331] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:08:31.617] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:08:39.331] SBL1:1210.0.1.0 [2025-09-24 10:08:39.379] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:08:40.946] SBL2:1210.0.1.0 [2025-09-24 10:08:40.993] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:08:41.090] j-A [2025-09-24 10:08:48.444] The R5 Autosar Classic is running [2025-09-24 10:08:48.468] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:08:48.468] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:08:49.075] INIT: version 2.96 booting [2025-09-24 10:08:49.187] INIT: Entering runlevel: 5 [2025-09-24 10:08:49.347] mtd24 attached [2025-09-24 10:08:49.347] mtd32 attached [2025-09-24 10:08:49.363] mtd28 attached [2025-09-24 10:08:49.411] ubi0:textures is mounted. [2025-09-24 10:08:49.411] ubi1:dml_code is mounted. [2025-09-24 10:08:49.482] RTNETLINK answers: File exists [2025-09-24 10:08:49.482] ubi2:animations is mounted. [2025-09-24 10:08:49.482] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:08:49.482] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:08:49.482] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:08:49.482] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:08:49.482] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:08:49.482] data.LB_FadeInType0=100 [2025-09-24 10:08:49.482] data.CHLH_FadeInType0=0 [2025-09-24 10:08:49.482] data.WU_FadeInDelay=0 [2025-09-24 10:08:49.482] max_time_out=0 [2025-09-24 10:08:49.482] No splash screen [2025-09-24 10:08:49.482] stop dss Done [2025-09-24 10:08:49.514] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:08:49.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:08:49.548] /dev/mem opened. [2025-09-24 10:08:49.548] Memory mapped at address 0xffff90e98000. [2025-09-24 10:08:49.548] Read at address 0x00600018 (0xffff90e98018): 0x00000000 [2025-09-24 10:08:49.548] Write at address 0x00600018 (0xffff90e98018): 0x00400040, readback 0x00400040 [2025-09-24 10:08:49.820] Waiting data available... [2025-09-24 10:08:49.835] Loaded PowerVR consumer services. [2025-09-24 10:08:49.868] 512+0 records in [2025-09-24 10:08:49.868] 512+0 records out [2025-09-24 10:08:49.899] Starting syslogd/klogd: done [2025-09-24 10:08:49.915] DML Start [2025-09-24 10:08:50.075] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:08:50.331] DML res1: 0 [2025-09-24 10:08:50.741] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:08:50.741] Read Success [2025-09-24 10:08:50.741] Verifying certificate... [2025-09-24 10:08:50.980] Verified OK [2025-09-24 10:08:50.996] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:08:52.633] Verified OK [2025-09-24 10:08:52.633] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:08:53.233] Verified OK [2025-09-24 10:08:53.233] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:08:55.903] fs.protected_hardlinks = 1 [2025-09-24 10:08:55.903] fs.protected_symlinks = 1 [2025-09-24 10:08:55.918] kernel.modules_disabled = 1 [2025-09-24 10:08:56.126] [2025-09-24 10:08:56.126] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:08:57.385] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:09:05.053] SBL1:1210.0.1.0 [2025-09-24 10:09:05.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:09:06.668] SBL2:1210.0.1.0 [2025-09-24 10:09:06.715] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:09:06.828] j-A [2025-09-24 10:09:14.199] The R5 Autosar Classic is running [2025-09-24 10:09:14.199] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:09:14.199] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:09:14.807] INIT: version 2.96 booting [2025-09-24 10:09:14.903] INIT: Entering runlevel: 5 [2025-09-24 10:09:15.062] mtd24 attached [2025-09-24 10:09:15.078] mtd28 attached [2025-09-24 10:09:15.078] mtd32 attached [2025-09-24 10:09:15.126] ubi0:textures is mounted. [2025-09-24 10:09:15.126] RTNETLINK answers: File exists [2025-09-24 10:09:15.193] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:09:15.193] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:09:15.193] ubi1:animations is mounted. [2025-09-24 10:09:15.193] ubi2:dml_code is mounted. [2025-09-24 10:09:15.193] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:09:15.193] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:09:15.193] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:09:15.193] data.LB_FadeInType0=100 [2025-09-24 10:09:15.193] data.CHLH_FadeInType0=0 [2025-09-24 10:09:15.193] data.WU_FadeInDelay=0 [2025-09-24 10:09:15.193] max_time_out=0 [2025-09-24 10:09:15.193] No splash screen [2025-09-24 10:09:15.193] stop dss Done [2025-09-24 10:09:15.267] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:09:15.267] /dev/mem opened. [2025-09-24 10:09:15.267] Memory mapped at address 0xffff82b2b000. [2025-09-24 10:09:15.267] Read at address 0x00600018 (0xffff82b2b018): 0x00000000 [2025-09-24 10:09:15.267] Write at address 0x00600018 (0xffff82b2b018): 0x00400040, readback 0x00400040 [2025-09-24 10:09:15.267] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:09:15.427] Loaded PowerVR consumer services. [2025-09-24 10:09:15.539] Waiting data available... [2025-09-24 10:09:15.571] 512+0 records in [2025-09-24 10:09:15.571] 512+0 records out [2025-09-24 10:09:15.618] Starting syslogd/klogd: done [2025-09-24 10:09:15.634] DML Start [2025-09-24 10:09:15.763] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:09:15.971] DML res1: 0 [2025-09-24 10:09:16.450] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:09:16.472] Read Success [2025-09-24 10:09:16.472] Verifying certificate... [2025-09-24 10:09:16.712] Verified OK [2025-09-24 10:09:16.728] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:09:18.342] Verified OK [2025-09-24 10:09:18.342] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:09:18.981] Verified OK [2025-09-24 10:09:18.981] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:09:21.650] fs.protected_hardlinks = 1 [2025-09-24 10:09:21.650] fs.protected_symlinks = 1 [2025-09-24 10:09:21.650] kernel.modules_disabled = 1 [2025-09-24 10:09:21.842] [2025-09-24 10:09:21.842] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:09:23.055] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:09:30.768] SBL1:1210.0.1.0 [2025-09-24 10:09:30.816] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:09:32.399] SBL2:1210.0.1.0 [2025-09-24 10:09:32.431] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:09:32.542] j-A [2025-09-24 10:09:39.915] The R5 Autosar Classic is running [2025-09-24 10:09:39.915] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:09:39.915] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:09:40.522] INIT: version 2.96 booting [2025-09-24 10:09:40.635] INIT: Entering runlevel: 5 [2025-09-24 10:09:40.794] mtd28 attached [2025-09-24 10:09:40.794] mtd24 attached [2025-09-24 10:09:40.810] mtd32 attached [2025-09-24 10:09:40.858] ubi0:animations is mounted. [2025-09-24 10:09:40.858] RTNETLINK answers: File exists [2025-09-24 10:09:40.926] ubi1:textures is mounted. [2025-09-24 10:09:40.926] ubi2:dml_code is mounted. [2025-09-24 10:09:40.926] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:09:40.926] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:09:40.926] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:09:40.926] data.LB_FadeInType0=100 [2025-09-24 10:09:40.926] data.CHLH_FadeInType0=0 [2025-09-24 10:09:40.926] data.WU_FadeInDelay=0 [2025-09-24 10:09:40.926] max_time_out=0 [2025-09-24 10:09:40.926] No splash screen [2025-09-24 10:09:40.926] stop dss Done [2025-09-24 10:09:40.926] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:09:40.926] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:09:41.001] /dev/mem opened. [2025-09-24 10:09:41.001] Memory mapped at address 0xffff9a10c000. [2025-09-24 10:09:41.001] Read at address 0x00600018 (0xffff9a10c018): 0x00000000 [2025-09-24 10:09:41.001] Write at address 0x00600018 (0xffff9a10c018): 0x00400040, readback 0x00400040 [2025-09-24 10:09:41.001] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:09:41.001] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:09:41.240] Loaded PowerVR consumer services. [2025-09-24 10:09:41.256] Waiting data available... [2025-09-24 10:09:41.288] 512+0 records in [2025-09-24 10:09:41.288] 512+0 records out [2025-09-24 10:09:41.335] Starting syslogd/klogd: done [2025-09-24 10:09:41.351] DML Start [2025-09-24 10:09:41.528] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:09:41.768] DML res1: 0 [2025-09-24 10:09:42.199] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:09:42.220] Read Success [2025-09-24 10:09:42.220] Verifying certificate... [2025-09-24 10:09:42.476] Verified OK [2025-09-24 10:09:42.507] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:09:44.107] Verified OK [2025-09-24 10:09:44.107] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:09:44.745] Verified OK [2025-09-24 10:09:44.745] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:09:47.319] fs.protected_hardlinks = 1 [2025-09-24 10:09:47.335] fs.protected_symlinks = 1 [2025-09-24 10:09:47.335] kernel.modules_disabled = 1 [2025-09-24 10:09:47.543] [2025-09-24 10:09:47.543] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:09:48.767] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:09:56.505] SBL1:1210.0.1.0 [2025-09-24 10:09:56.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:09:58.119] SBL2:1210.0.1.0 [2025-09-24 10:09:58.151] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:09:58.264] j-A [2025-09-24 10:10:05.616] The R5 Autosar Classic is running [2025-09-24 10:10:05.639] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:10:05.639] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:10:06.246] INIT: version 2.96 booting [2025-09-24 10:10:06.358] INIT: Entering runlevel: 5 [2025-09-24 10:10:06.518] mtd24 attached [2025-09-24 10:10:06.534] mtd32 attached [2025-09-24 10:10:06.534] mtd28 attached [2025-09-24 10:10:06.582] RTNETLINK answers: File exists [2025-09-24 10:10:06.652] ubi0:textures is mounted. [2025-09-24 10:10:06.652] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:10:06.652] ubi2:animations is mounted. [2025-09-24 10:10:06.652] ubi1:dml_code is mounted. [2025-09-24 10:10:06.652] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:10:06.652] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:10:06.652] data.LB_FadeInType0=100 [2025-09-24 10:10:06.652] data.CHLH_FadeInType0=0 [2025-09-24 10:10:06.652] data.WU_FadeInDelay=0 [2025-09-24 10:10:06.652] max_time_out=0 [2025-09-24 10:10:06.652] No splash screen [2025-09-24 10:10:06.652] stop dss Done [2025-09-24 10:10:06.652] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:10:06.652] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:10:06.719] /dev/mem opened. [2025-09-24 10:10:06.719] Memory mapped at address 0xffff9997d000. [2025-09-24 10:10:06.719] Read at address 0x00600018 (0xffff9997d018): 0x00000000 [2025-09-24 10:10:06.719] Write at address 0x00600018 (0xffff9997d018): 0x00400040, readback 0x00400040 [2025-09-24 10:10:06.759] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:10:06.759] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:10:06.887] Loaded PowerVR consumer services. [2025-09-24 10:10:07.030] Waiting data available... [2025-09-24 10:10:07.047] 512+0 records in [2025-09-24 10:10:07.047] 512+0 records out [2025-09-24 10:10:07.078] Starting syslogd/klogd: done [2025-09-24 10:10:07.094] DML Start [2025-09-24 10:10:07.238] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:10:07.430] DML res1: 0 [2025-09-24 10:10:07.958] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:10:07.958] Read Success [2025-09-24 10:10:07.973] Verifying certificate... [2025-09-24 10:10:08.229] Verified OK [2025-09-24 10:10:08.229] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:10:09.882] Verified OK [2025-09-24 10:10:09.882] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:10:10.515] Verified OK [2025-09-24 10:10:10.515] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:10:13.106] fs.protected_hardlinks = 1 [2025-09-24 10:10:13.106] fs.protected_symlinks = 1 [2025-09-24 10:10:13.121] kernel.modules_disabled = 1 [2025-09-24 10:10:13.313] [2025-09-24 10:10:13.313] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:10:14.493] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:10:22.203] SBL1:1210.0.1.0 [2025-09-24 10:10:22.251] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:10:23.818] SBL2:1210.0.1.0 [2025-09-24 10:10:23.866] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:10:23.979] j-A [2025-09-24 10:10:31.315] The R5 Autosar Classic is running [2025-09-24 10:10:31.346] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:10:31.346] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:10:31.953] INIT: version 2.96 booting [2025-09-24 10:10:32.065] INIT: Entering runlevel: 5 [2025-09-24 10:10:32.225] mtd28 attached [2025-09-24 10:10:32.225] mtd24 attached [2025-09-24 10:10:32.241] mtd32 attached [2025-09-24 10:10:32.289] ubi0:animations is mounted. [2025-09-24 10:10:32.289] RTNETLINK answers: File exists [2025-09-24 10:10:32.339] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:10:32.339] ubi1:textures is mounted. [2025-09-24 10:10:32.339] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:10:32.339] ubi2:dml_code is mounted. [2025-09-24 10:10:32.340] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:10:32.340] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:10:32.340] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:10:32.363] data.LB_FadeInType0=100 [2025-09-24 10:10:32.363] data.CHLH_FadeInType0=0 [2025-09-24 10:10:32.363] data.WU_FadeInDelay=0 [2025-09-24 10:10:32.363] max_time_out=0 [2025-09-24 10:10:32.363] No splash screen [2025-09-24 10:10:32.363] stop dss Done [2025-09-24 10:10:32.411] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:10:32.451] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:10:32.451] /dev/mem opened. [2025-09-24 10:10:32.451] Memory mapped at address 0xffffa7067000. [2025-09-24 10:10:32.451] Read at address 0x00600018 (0xffffa7067018): 0x00000000 [2025-09-24 10:10:32.451] Write at address 0x00600018 (0xffffa7067018): 0x00400040, readback 0x00400040 [2025-09-24 10:10:32.531] Loaded PowerVR consumer services. [2025-09-24 10:10:32.707] Waiting data available... [2025-09-24 10:10:32.739] 512+0 records in [2025-09-24 10:10:32.739] 512+0 records out [2025-09-24 10:10:32.786] Starting syslogd/klogd: done [2025-09-24 10:10:32.802] DML Start [2025-09-24 10:10:32.994] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:10:33.250] DML res1: 0 [2025-09-24 10:10:33.657] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:10:33.657] Read Success [2025-09-24 10:10:33.657] Verifying certificate... [2025-09-24 10:10:33.928] Verified OK [2025-09-24 10:10:33.944] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:10:35.711] Verified OK [2025-09-24 10:10:35.711] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:10:36.293] Verified OK [2025-09-24 10:10:36.293] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:10:38.785] fs.protected_hardlinks = 1 [2025-09-24 10:10:38.785] fs.protected_symlinks = 1 [2025-09-24 10:10:38.785] kernel.modules_disabled = 1 [2025-09-24 10:10:38.961] [2025-09-24 10:10:38.961] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:10:40.214] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:10:47.914] SBL1:1210.0.1.0 [2025-09-24 10:10:47.946] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:10:49.529] SBL2:1210.0.1.0 [2025-09-24 10:10:49.576] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:10:49.672] j-A [2025-09-24 10:10:57.026] The R5 Autosar Classic is running [2025-09-24 10:10:57.050] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:10:57.050] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:10:57.657] INIT: version 2.96 booting [2025-09-24 10:10:57.769] INIT: Entering runlevel: 5 [2025-09-24 10:10:57.913] mtd24 attached [2025-09-24 10:10:57.929] mtd28 attached [2025-09-24 10:10:57.961] ubi0:textures is mounted. [2025-09-24 10:10:57.961] mtd32 attached [2025-09-24 10:10:57.976] ubi1:animations is mounted. [2025-09-24 10:10:57.993] RTNETLINK answers: File exists [2025-09-24 10:10:58.052] ubi2:dml_code is mounted. [2025-09-24 10:10:58.052] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:10:58.052] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:10:58.052] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:10:58.052] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:10:58.052] data.LB_FadeInType0=100 [2025-09-24 10:10:58.052] data.CHLH_FadeInType0=0 [2025-09-24 10:10:58.052] data.WU_FadeInDelay=0 [2025-09-24 10:10:58.052] max_time_out=0 [2025-09-24 10:10:58.052] No splash screen [2025-09-24 10:10:58.052] stop dss Done [2025-09-24 10:10:58.052] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:10:58.135] /dev/mem opened. [2025-09-24 10:10:58.135] Memory mapped at address 0xffffa58a7000. [2025-09-24 10:10:58.135] Read at address 0x00600018 (0xffffa58a7018): 0x00000000 [2025-09-24 10:10:58.135] Write at address 0x00600018 (0xffffa58a7018): 0x00400040, readback 0x00400040 [2025-09-24 10:10:58.135] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:10:58.151] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:10:58.262] Loaded PowerVR consumer services. [2025-09-24 10:10:58.390] Waiting data available... [2025-09-24 10:10:58.422] 512+0 records in [2025-09-24 10:10:58.422] 512+0 records out [2025-09-24 10:10:58.438] Starting syslogd/klogd: done [2025-09-24 10:10:58.454] DML Start [2025-09-24 10:10:58.630] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:10:58.854] DML res1: 0 [2025-09-24 10:10:59.309] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:10:59.309] Read Success [2025-09-24 10:10:59.309] Verifying certificate... [2025-09-24 10:10:59.565] Verified OK [2025-09-24 10:10:59.581] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:11:01.223] Verified OK [2025-09-24 10:11:01.223] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:11:01.840] Verified OK [2025-09-24 10:11:01.840] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:11:04.509] fs.protected_hardlinks = 1 [2025-09-24 10:11:04.509] fs.protected_symlinks = 1 [2025-09-24 10:11:04.509] kernel.modules_disabled = 1 [2025-09-24 10:11:04.717] [2025-09-24 10:11:04.717] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:11:05.884] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:11:13.634] SBL1:1210.0.1.0 [2025-09-24 10:11:13.666] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:11:15.249] SBL2:1210.0.1.0 [2025-09-24 10:11:15.297] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:11:15.393] j-A [2025-09-24 10:11:22.747] The R5 Autosar Classic is running [2025-09-24 10:11:22.768] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:11:22.768] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:11:23.375] INIT: version 2.96 booting [2025-09-24 10:11:23.487] INIT: Entering runlevel: 5 [2025-09-24 10:11:23.631] mtd24 attached [2025-09-24 10:11:23.647] mtd28 attached [2025-09-24 10:11:23.663] mtd32 attached [2025-09-24 10:11:23.711] ubi0:textures is mounted. [2025-09-24 10:11:23.711] RTNETLINK answers: File exists [2025-09-24 10:11:23.748] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:11:23.748] ubi1:animations is mounted. [2025-09-24 10:11:23.748] ubi2:dml_code is mounted. [2025-09-24 10:11:23.748] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:11:23.748] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:11:23.748] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:11:23.748] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:11:23.769] data.LB_FadeInType0=100 [2025-09-24 10:11:23.769] data.CHLH_FadeInType0=0 [2025-09-24 10:11:23.769] data.WU_FadeInDelay=0 [2025-09-24 10:11:23.769] max_time_out=0 [2025-09-24 10:11:23.769] No splash screen [2025-09-24 10:11:23.769] stop dss Done [2025-09-24 10:11:23.845] /dev/mem opened. [2025-09-24 10:11:23.845] Memory mapped at address 0xffffa4950000. [2025-09-24 10:11:23.845] Read at address 0x00600018 (0xffffa4950018): 0x00000000 [2025-09-24 10:11:23.845] Write at address 0x00600018 (0xffffa4950018): 0x00400040, readback 0x00400040 [2025-09-24 10:11:23.845] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:11:23.845] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:11:23.957] Loaded PowerVR consumer services. [2025-09-24 10:11:24.117] Waiting data available... [2025-09-24 10:11:24.149] 512+0 records in [2025-09-24 10:11:24.149] 512+0 records out [2025-09-24 10:11:24.197] Starting syslogd/klogd: done [2025-09-24 10:11:24.212] DML Start [2025-09-24 10:11:24.405] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:11:24.629] DML res1: 0 [2025-09-24 10:11:25.010] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:11:25.010] Read Success [2025-09-24 10:11:25.010] Verifying certificate... [2025-09-24 10:11:25.234] Verified OK [2025-09-24 10:11:25.250] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:11:26.945] Verified OK [2025-09-24 10:11:26.961] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:11:27.563] Verified OK [2025-09-24 10:11:27.563] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:11:30.136] fs.protected_hardlinks = 1 [2025-09-24 10:11:30.136] fs.protected_symlinks = 1 [2025-09-24 10:11:30.152] kernel.modules_disabled = 1 [2025-09-24 10:11:30.343] [2025-09-24 10:11:30.343] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:11:31.726] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:11:39.340] SBL1:1210.0.1.0 [2025-09-24 10:11:39.372] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:11:40.955] SBL2:1210.0.1.0 [2025-09-24 10:11:40.986] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 10:11:41.098] j-A [2025-09-24 10:11:48.453] The R5 Autosar Classic is running [2025-09-24 10:11:48.453] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:11:48.474] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:11:49.082] INIT: version 2.96 booting [2025-09-24 10:11:49.193] INIT: Entering runlevel: 5 [2025-09-24 10:11:49.352] mtd28 attached [2025-09-24 10:11:49.352] mtd24 attached [2025-09-24 10:11:49.368] mtd32 attached [2025-09-24 10:11:49.417] RTNETLINK answers: File exists [2025-09-24 10:11:49.483] ubi0:animations is mounted. [2025-09-24 10:11:49.483] ubi1:textures is mounted. [2025-09-24 10:11:49.483] ubi2:dml_code is mounted. [2025-09-24 10:11:49.483] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:11:49.483] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:11:49.483] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:11:49.483] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:11:49.483] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:11:49.483] data.LB_FadeInType0=100 [2025-09-24 10:11:49.483] data.CHLH_FadeInType0=0 [2025-09-24 10:11:49.483] data.WU_FadeInDelay=0 [2025-09-24 10:11:49.483] max_time_out=0 [2025-09-24 10:11:49.483] No splash screen [2025-09-24 10:11:49.483] stop dss Done [2025-09-24 10:11:49.531] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:11:49.569] /dev/mem opened. [2025-09-24 10:11:49.569] Memory mapped at address 0xffffab397000. [2025-09-24 10:11:49.569] Read at address 0x00600018 (0xffffab397018): 0x00000000 [2025-09-24 10:11:49.569] Write at address 0x00600018 (0xffffab397018): 0x00400040, readback 0x00400040 [2025-09-24 10:11:49.569] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:11:49.778] Loaded PowerVR consumer services. [2025-09-24 10:11:49.842] Waiting data available... [2025-09-24 10:11:49.858] 512+0 records in [2025-09-24 10:11:49.858] 512+0 records out [2025-09-24 10:11:49.889] Starting syslogd/klogd: done [2025-09-24 10:11:49.921] DML Start [2025-09-24 10:11:50.097] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:11:50.337] DML res1: 0 [2025-09-24 10:11:50.796] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:11:50.796] Read Success [2025-09-24 10:11:50.796] Verifying certificate... [2025-09-24 10:11:51.068] Verified OK [2025-09-24 10:11:51.099] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:11:52.790] Verified OK [2025-09-24 10:11:52.790] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:11:53.326] Verified OK [2025-09-24 10:11:53.326] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:11:55.818] fs.protected_hardlinks = 1 [2025-09-24 10:11:55.818] fs.protected_symlinks = 1 [2025-09-24 10:11:55.834] kernel.modules_disabled = 1 [2025-09-24 10:11:56.026] [2025-09-24 10:11:56.026] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:11:57.350] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:12:05.041] SBL1:1210.0.1.0 [2025-09-24 10:12:05.089] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:12:06.657] SBL2:1210.0.1.0 [2025-09-24 10:12:06.705] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:12:06.801] j-A [2025-09-24 10:12:14.155] The R5 Autosar Classic is running [2025-09-24 10:12:14.178] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:12:14.178] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:12:14.786] INIT: version 2.96 booting [2025-09-24 10:12:14.897] INIT: Entering runlevel: 5 [2025-09-24 10:12:15.057] mtd28 attached [2025-09-24 10:12:15.073] mtd32 attached [2025-09-24 10:12:15.073] mtd24 attached [2025-09-24 10:12:15.121] ubi0:animations is mounted. [2025-09-24 10:12:15.121] RTNETLINK answers: File exists [2025-09-24 10:12:15.179] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:12:15.179] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:12:15.179] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:12:15.179] ubi1:dml_code is mounted. [2025-09-24 10:12:15.179] ubi2:textures is mounted. [2025-09-24 10:12:15.179] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:12:15.179] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:12:15.179] data.LB_FadeInType0=100 [2025-09-24 10:12:15.179] data.CHLH_FadeInType0=0 [2025-09-24 10:12:15.179] data.WU_FadeInDelay=0 [2025-09-24 10:12:15.179] max_time_out=0 [2025-09-24 10:12:15.179] No splash screen [2025-09-24 10:12:15.179] stop dss Done [2025-09-24 10:12:15.238] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:12:15.238] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:12:15.238] /dev/mem opened. [2025-09-24 10:12:15.238] Memory mapped at address 0xffffb7ccd000. [2025-09-24 10:12:15.238] Read at address 0x00600018 (0xffffb7ccd018): 0x00000000 [2025-09-24 10:12:15.238] Write at address 0x00600018 (0xffffb7ccd018): 0x00400040, readback 0x00400040 [2025-09-24 10:12:15.365] Loaded PowerVR consumer services. [2025-09-24 10:12:15.525] Waiting data available... [2025-09-24 10:12:15.557] 512+0 records in [2025-09-24 10:12:15.557] 512+0 records out [2025-09-24 10:12:15.605] Starting syslogd/klogd: done [2025-09-24 10:12:15.621] DML Start [2025-09-24 10:12:15.797] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:12:16.005] DML res1: 0 [2025-09-24 10:12:16.452] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:12:16.452] Read Success [2025-09-24 10:12:16.469] Verifying certificate... [2025-09-24 10:12:16.772] Verified OK [2025-09-24 10:12:16.788] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:12:18.513] Verified OK [2025-09-24 10:12:18.513] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:12:19.034] Verified OK [2025-09-24 10:12:19.034] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:12:21.511] fs.protected_hardlinks = 1 [2025-09-24 10:12:21.511] fs.protected_symlinks = 1 [2025-09-24 10:12:21.527] kernel.modules_disabled = 1 [2025-09-24 10:12:21.719] [2025-09-24 10:12:21.719] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:12:23.042] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:12:30.763] SBL1:1210.0.1.0 [2025-09-24 10:12:30.795] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:12:32.378] SBL2:1210.0.1.0 [2025-09-24 10:12:32.410] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:12:32.521] j-A [2025-09-24 10:12:39.897] The R5 Autosar Classic is running [2025-09-24 10:12:39.897] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:12:39.897] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:12:40.504] INIT: version 2.96 booting [2025-09-24 10:12:40.615] INIT: Entering runlevel: 5 [2025-09-24 10:12:40.760] mtd24 attached [2025-09-24 10:12:40.776] mtd32 attached [2025-09-24 10:12:40.792] mtd28 attached [2025-09-24 10:12:40.824] ubi0:textures is mounted. [2025-09-24 10:12:40.840] RTNETLINK answers: File exists [2025-09-24 10:12:40.894] ubi2:animations is mounted. [2025-09-24 10:12:40.894] ubi1:dml_code is mounted. [2025-09-24 10:12:40.894] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:12:40.894] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:12:40.894] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:12:40.894] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:12:40.894] data.LB_FadeInType0=100 [2025-09-24 10:12:40.894] data.CHLH_FadeInType0=0 [2025-09-24 10:12:40.894] data.WU_FadeInDelay=0 [2025-09-24 10:12:40.894] max_time_out=0 [2025-09-24 10:12:40.894] No splash screen [2025-09-24 10:12:40.894] stop dss Done [2025-09-24 10:12:40.894] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:12:40.925] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:12:40.966] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:12:40.966] /dev/mem opened. [2025-09-24 10:12:40.966] Memory mapped at address 0xffff844e8000. [2025-09-24 10:12:40.966] Read at address 0x00600018 (0xffff844e8018): 0x00000000 [2025-09-24 10:12:40.966] Write at address 0x00600018 (0xffff844e8018): 0x00400040, readback 0x00400040 [2025-09-24 10:12:41.253] Loaded PowerVR consumer services. [2025-09-24 10:12:41.253] Waiting data available... [2025-09-24 10:12:41.285] 512+0 records in [2025-09-24 10:12:41.285] 512+0 records out [2025-09-24 10:12:41.317] Starting syslogd/klogd: done [2025-09-24 10:12:41.333] DML Start [2025-09-24 10:12:41.525] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:12:41.764] DML res1: 0 [2025-09-24 10:12:42.223] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:12:42.223] Read Success [2025-09-24 10:12:42.223] Verifying certificate... [2025-09-24 10:12:42.463] Verified OK [2025-09-24 10:12:42.495] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:12:44.135] Verified OK [2025-09-24 10:12:44.135] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:12:44.770] Verified OK [2025-09-24 10:12:44.770] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:12:47.292] fs.protected_hardlinks = 1 [2025-09-24 10:12:47.292] fs.protected_symlinks = 1 [2025-09-24 10:12:47.292] kernel.modules_disabled = 1 [2025-09-24 10:12:47.468] [2025-09-24 10:12:47.468] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:12:48.755] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:12:56.447] SBL1:1210.0.1.0 [2025-09-24 10:12:56.495] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:12:58.062] SBL2:1210.0.1.0 [2025-09-24 10:12:58.110] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:12:58.222] j-A [2025-09-24 10:13:05.595] The R5 Autosar Classic is running [2025-09-24 10:13:05.595] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:13:05.595] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:13:06.202] INIT: version 2.96 booting [2025-09-24 10:13:06.298] INIT: Entering runlevel: 5 [2025-09-24 10:13:06.459] mtd24 attached [2025-09-24 10:13:06.459] mtd28 attached [2025-09-24 10:13:06.491] mtd32 attached [2025-09-24 10:13:06.491] ubi0:textures is mounted. [2025-09-24 10:13:06.587] ubi1:animations is mounted. [2025-09-24 10:13:06.587] RTNETLINK answers: File exists [2025-09-24 10:13:06.587] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:13:06.587] ubi2:dml_code is mounted. [2025-09-24 10:13:06.587] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:13:06.587] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:13:06.587] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:13:06.587] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:13:06.587] data.LB_FadeInType0=100 [2025-09-24 10:13:06.587] data.CHLH_FadeInType0=0 [2025-09-24 10:13:06.587] data.WU_FadeInDelay=0 [2025-09-24 10:13:06.587] max_time_out=0 [2025-09-24 10:13:06.587] No splash screen [2025-09-24 10:13:06.587] stop dss Done [2025-09-24 10:13:06.652] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:13:06.652] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:13:06.652] /dev/mem opened. [2025-09-24 10:13:06.652] Memory mapped at address 0xffffa67ba000. [2025-09-24 10:13:06.652] Read at address 0x00600018 (0xffffa67ba018): 0x00000000 [2025-09-24 10:13:06.652] Write at address 0x00600018 (0xffffa67ba018): 0x00400040, readback 0x00400040 [2025-09-24 10:13:06.780] Loaded PowerVR consumer services. [2025-09-24 10:13:06.940] Waiting data available... [2025-09-24 10:13:06.956] 512+0 records in [2025-09-24 10:13:06.956] 512+0 records out [2025-09-24 10:13:07.004] Starting syslogd/klogd: done [2025-09-24 10:13:07.020] DML Start [2025-09-24 10:13:07.228] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:13:07.484] DML res1: 0 [2025-09-24 10:13:07.878] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:13:07.878] Read Success [2025-09-24 10:13:07.878] Verifying certificate... [2025-09-24 10:13:08.166] Verified OK [2025-09-24 10:13:08.182] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:13:09.749] Verified OK [2025-09-24 10:13:09.749] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:13:10.339] Verified OK [2025-09-24 10:13:10.339] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:13:12.993] fs.protected_hardlinks = 1 [2025-09-24 10:13:12.993] fs.protected_symlinks = 1 [2025-09-24 10:13:13.009] kernel.modules_disabled = 1 [2025-09-24 10:13:13.216] [2025-09-24 10:13:13.216] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:13:14.492] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:13:22.147] SBL1:1210.0.1.0 [2025-09-24 10:13:22.195] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:13:23.761] SBL2:1210.0.1.0 [2025-09-24 10:13:23.809] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 10:13:23.922] j-A [2025-09-24 10:13:31.293] The R5 Autosar Classic is running [2025-09-24 10:13:31.293] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:13:31.293] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:13:31.901] INIT: version 2.96 booting [2025-09-24 10:13:32.012] INIT: Entering runlevel: 5 [2025-09-24 10:13:32.172] mtd32 attached [2025-09-24 10:13:32.172] mtd28 attached [2025-09-24 10:13:32.188] mtd24 attached [2025-09-24 10:13:32.204] ubi0:dml_code is mounted. [2025-09-24 10:13:32.236] RTNETLINK answers: File exists [2025-09-24 10:13:32.236] ubi1:animations is mounted. [2025-09-24 10:13:32.271] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:13:32.271] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:13:32.271] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:13:32.271] ubi2:textures is mounted. [2025-09-24 10:13:32.271] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:13:32.271] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:13:32.300] data.LB_FadeInType0=100 [2025-09-24 10:13:32.300] data.CHLH_FadeInType0=0 [2025-09-24 10:13:32.300] data.WU_FadeInDelay=0 [2025-09-24 10:13:32.300] max_time_out=0 [2025-09-24 10:13:32.300] No splash screen [2025-09-24 10:13:32.300] stop dss Done [2025-09-24 10:13:32.315] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:13:32.343] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:13:32.381] /dev/mem opened. [2025-09-24 10:13:32.381] Memory mapped at address 0xffff99e01000. [2025-09-24 10:13:32.381] Read at address 0x00600018 (0xffff99e01018): 0x00000000 [2025-09-24 10:13:32.381] Write at address 0x00600018 (0xffff99e01018): 0x00400040, readback 0x00400040 [2025-09-24 10:13:32.605] Loaded PowerVR consumer services. [2025-09-24 10:13:32.637] Waiting data available... [2025-09-24 10:13:32.670] 512+0 records in [2025-09-24 10:13:32.670] 512+0 records out [2025-09-24 10:13:32.686] Starting syslogd/klogd: done [2025-09-24 10:13:32.702] DML Start [2025-09-24 10:13:32.893] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:13:33.117] DML res1: 0 [2025-09-24 10:13:33.565] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:13:33.581] Read Success [2025-09-24 10:13:33.581] Verifying certificate... [2025-09-24 10:13:33.805] Verified OK [2025-09-24 10:13:33.821] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:13:35.490] Verified OK [2025-09-24 10:13:35.490] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:13:36.140] Verified OK [2025-09-24 10:13:36.140] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:13:38.810] fs.protected_hardlinks = 1 [2025-09-24 10:13:38.826] fs.protected_symlinks = 1 [2025-09-24 10:13:38.826] kernel.modules_disabled = 1 [2025-09-24 10:13:39.002] [2025-09-24 10:13:39.002] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:13:40.143] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:13:47.852] SBL1:1210.0.1.0 [2025-09-24 10:13:47.900] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:13:49.467] SBL2:1210.0.1.0 [2025-09-24 10:13:49.515] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:13:49.627] j-A [2025-09-24 10:13:56.965] The R5 Autosar Classic is running [2025-09-24 10:13:56.996] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:13:56.996] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:13:57.604] INIT: version 2.96 booting [2025-09-24 10:13:57.700] INIT: Entering runlevel: 5 [2025-09-24 10:13:57.860] mtd28 attached [2025-09-24 10:13:57.876] mtd32 attached [2025-09-24 10:13:57.876] mtd24 attached [2025-09-24 10:13:57.924] ubi0:animations is mounted. [2025-09-24 10:13:57.924] RTNETLINK answers: File exists [2025-09-24 10:13:57.989] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:13:57.990] ubi1:dml_code is mounted. [2025-09-24 10:13:57.990] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:13:57.990] ubi2:textures is mounted. [2025-09-24 10:13:57.990] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:13:57.990] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:13:57.990] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:13:57.990] data.LB_FadeInType0=100 [2025-09-24 10:13:57.990] data.CHLH_FadeInType0=0 [2025-09-24 10:13:57.990] data.WU_FadeInDelay=0 [2025-09-24 10:13:57.990] max_time_out=0 [2025-09-24 10:13:57.990] No splash screen [2025-09-24 10:13:57.990] stop dss Done [2025-09-24 10:13:58.021] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:13:58.068] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:13:58.068] /dev/mem opened. [2025-09-24 10:13:58.068] Memory mapped at address 0xffff810eb000. [2025-09-24 10:13:58.068] Read at address 0x00600018 (0xffff810eb018): 0x00000000 [2025-09-24 10:13:58.068] Write at address 0x00600018 (0xffff810eb018): 0x00400040, readback 0x00400040 [2025-09-24 10:13:58.148] Loaded PowerVR consumer services. [2025-09-24 10:13:58.323] Waiting data available... [2025-09-24 10:13:58.355] 512+0 records in [2025-09-24 10:13:58.355] 512+0 records out [2025-09-24 10:13:58.387] Starting syslogd/klogd: done [2025-09-24 10:13:58.404] DML Start [2025-09-24 10:13:58.548] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:13:58.787] DML res1: 0 [2025-09-24 10:13:59.259] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:13:59.259] Read Success [2025-09-24 10:13:59.259] Verifying certificate... [2025-09-24 10:13:59.498] Verified OK [2025-09-24 10:13:59.514] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:14:01.201] Verified OK [2025-09-24 10:14:01.201] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:14:01.810] Verified OK [2025-09-24 10:14:01.810] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:14:04.382] fs.protected_hardlinks = 1 [2025-09-24 10:14:04.399] fs.protected_symlinks = 1 [2025-09-24 10:14:04.399] kernel.modules_disabled = 1 [2025-09-24 10:14:04.606] [2025-09-24 10:14:04.606] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:14:05.844] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:14:13.553] SBL1:1210.0.1.0 [2025-09-24 10:14:13.601] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:14:15.168] SBL2:1210.0.1.0 [2025-09-24 10:14:15.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:14:15.327] j-A [2025-09-24 10:14:22.665] The R5 Autosar Classic is running [2025-09-24 10:14:22.696] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:14:22.696] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:14:23.303] INIT: version 2.96 booting [2025-09-24 10:14:23.416] INIT: Entering runlevel: 5 [2025-09-24 10:14:23.576] mtd32 attached [2025-09-24 10:14:23.576] mtd24 attached [2025-09-24 10:14:23.591] mtd28 attached [2025-09-24 10:14:23.607] ubi0:dml_code is mounted. [2025-09-24 10:14:23.639] RTNETLINK answers: File exists [2025-09-24 10:14:23.698] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:14:23.698] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:14:23.698] ubi1:textures is mounted. [2025-09-24 10:14:23.698] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:14:23.698] ubi2:animations is mounted. [2025-09-24 10:14:23.698] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:14:23.698] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:14:23.698] data.LB_FadeInType0=100 [2025-09-24 10:14:23.698] data.CHLH_FadeInType0=0 [2025-09-24 10:14:23.698] data.WU_FadeInDelay=0 [2025-09-24 10:14:23.698] max_time_out=0 [2025-09-24 10:14:23.698] No splash screen [2025-09-24 10:14:23.698] stop dss Done [2025-09-24 10:14:23.746] /dev/mem opened. [2025-09-24 10:14:23.793] Memory mapped at address 0xffffba696000. [2025-09-24 10:14:23.793] Read at address 0x00600018 (0xffffba696018): 0x00000000 [2025-09-24 10:14:23.793] Write at address 0x00600018 (0xffffba696018): 0x00400040, readback 0x00400040 [2025-09-24 10:14:23.793] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:14:23.793] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:14:23.858] Loaded PowerVR consumer services. [2025-09-24 10:14:24.033] Waiting data available... [2025-09-24 10:14:24.065] 512+0 records in [2025-09-24 10:14:24.065] 512+0 records out [2025-09-24 10:14:24.129] Starting syslogd/klogd: done [2025-09-24 10:14:24.145] DML Start [2025-09-24 10:14:24.321] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:14:24.529] DML res1: 0 [2025-09-24 10:14:24.936] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:14:24.936] Read Success [2025-09-24 10:14:24.936] Verifying certificate... [2025-09-24 10:14:25.193] Verified OK [2025-09-24 10:14:25.208] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:14:26.895] Verified OK [2025-09-24 10:14:26.895] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:14:27.419] Verified OK [2025-09-24 10:14:27.419] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:14:29.914] fs.protected_hardlinks = 1 [2025-09-24 10:14:29.944] fs.protected_symlinks = 1 [2025-09-24 10:14:29.944] kernel.modules_disabled = 1 [2025-09-24 10:14:30.136] [2025-09-24 10:14:30.136] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:14:31.565] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:14:39.265] SBL1:1210.0.1.0 [2025-09-24 10:14:39.313] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:14:40.880] SBL2:1210.0.1.0 [2025-09-24 10:14:40.927] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:14:41.039] j-A [2025-09-24 10:14:48.409] The R5 Autosar Classic is running [2025-09-24 10:14:48.409] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:14:48.409] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:14:49.016] INIT: version 2.96 booting [2025-09-24 10:14:49.128] INIT: Entering runlevel: 5 [2025-09-24 10:14:49.288] mtd28 attached [2025-09-24 10:14:49.288] mtd24 attached [2025-09-24 10:14:49.320] mtd32 attached [2025-09-24 10:14:49.352] ubi0:animations is mounted. [2025-09-24 10:14:49.352] RTNETLINK answers: File exists [2025-09-24 10:14:49.411] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:14:49.411] ubi1:textures is mounted. [2025-09-24 10:14:49.411] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:14:49.411] ubi2:dml_code is mounted. [2025-09-24 10:14:49.411] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:14:49.411] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:14:49.411] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:14:49.411] data.LB_FadeInType0=100 [2025-09-24 10:14:49.411] data.CHLH_FadeInType0=0 [2025-09-24 10:14:49.411] data.WU_FadeInDelay=0 [2025-09-24 10:14:49.411] max_time_out=0 [2025-09-24 10:14:49.411] No splash screen [2025-09-24 10:14:49.411] stop dss Done [2025-09-24 10:14:49.458] /dev/mem opened. [2025-09-24 10:14:49.498] Memory mapped at address 0xffffa7ab8000. [2025-09-24 10:14:49.498] Read at address 0x00600018 (0xffffa7ab8018): 0x00000000 [2025-09-24 10:14:49.498] Write at address 0x00600018 (0xffffa7ab8018): 0x00400040, readback 0x00400040 [2025-09-24 10:14:49.498] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:14:49.498] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:14:49.674] Loaded PowerVR consumer services. [2025-09-24 10:14:49.785] Waiting data available... [2025-09-24 10:14:49.817] 512+0 records in [2025-09-24 10:14:49.817] 512+0 records out [2025-09-24 10:14:49.833] Starting syslogd/klogd: done [2025-09-24 10:14:49.849] DML Start [2025-09-24 10:14:50.058] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:14:50.282] DML res1: 0 [2025-09-24 10:14:50.713] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:14:50.734] Read Success [2025-09-24 10:14:50.734] Verifying certificate... [2025-09-24 10:14:50.990] Verified OK [2025-09-24 10:14:51.006] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:14:52.678] Verified OK [2025-09-24 10:14:52.678] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:14:53.267] Verified OK [2025-09-24 10:14:53.267] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:14:55.793] fs.protected_hardlinks = 1 [2025-09-24 10:14:55.809] fs.protected_symlinks = 1 [2025-09-24 10:14:55.809] kernel.modules_disabled = 1 [2025-09-24 10:14:56.001] [2025-09-24 10:14:56.001] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:14:57.340] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:15:04.970] SBL1:1210.0.1.0 [2025-09-24 10:15:05.018] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:15:06.584] SBL2:1210.0.1.0 [2025-09-24 10:15:06.633] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:15:06.744] j-A [2025-09-24 10:15:14.115] The R5 Autosar Classic is running [2025-09-24 10:15:14.115] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:15:14.115] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:15:14.723] INIT: version 2.96 booting [2025-09-24 10:15:14.835] INIT: Entering runlevel: 5 [2025-09-24 10:15:14.979] mtd28 attached [2025-09-24 10:15:14.995] mtd24 attached [2025-09-24 10:15:15.011] mtd32 attached [2025-09-24 10:15:15.043] ubi0:animations is mounted. [2025-09-24 10:15:15.114] RTNETLINK answers: File exists [2025-09-24 10:15:15.114] ubi1:textures is mounted. [2025-09-24 10:15:15.114] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:15:15.114] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:15:15.114] ubi2:dml_code is mounted. [2025-09-24 10:15:15.114] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:15:15.114] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:15:15.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:15:15.114] data.LB_FadeInType0=100 [2025-09-24 10:15:15.114] data.CHLH_FadeInType0=0 [2025-09-24 10:15:15.114] data.WU_FadeInDelay=0 [2025-09-24 10:15:15.114] max_time_out=0 [2025-09-24 10:15:15.114] No splash screen [2025-09-24 10:15:15.114] stop dss Done [2025-09-24 10:15:15.187] /dev/mem opened. [2025-09-24 10:15:15.187] Memory mapped at address 0xffff8d93b000. [2025-09-24 10:15:15.187] Read at address 0x00600018 (0xffff8d93b018): 0x00000000 [2025-09-24 10:15:15.187] Write at address 0x00600018 (0xffff8d93b018): 0x00400040, readback 0x00400040 [2025-09-24 10:15:15.187] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:15:15.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:15:15.299] Loaded PowerVR consumer services. [2025-09-24 10:15:15.459] Waiting data available... [2025-09-24 10:15:15.474] 512+0 records in [2025-09-24 10:15:15.490] 512+0 records out [2025-09-24 10:15:15.538] Starting syslogd/klogd: done [2025-09-24 10:15:15.554] DML Start [2025-09-24 10:15:15.714] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:15:15.922] DML res1: 0 [2025-09-24 10:15:16.395] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:15:16.395] Read Success [2025-09-24 10:15:16.395] Verifying certificate... [2025-09-24 10:15:16.603] Verified OK [2025-09-24 10:15:16.619] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:15:18.291] Verified OK [2025-09-24 10:15:18.291] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:15:18.920] Verified OK [2025-09-24 10:15:18.920] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:15:21.543] fs.protected_hardlinks = 1 [2025-09-24 10:15:21.543] fs.protected_symlinks = 1 [2025-09-24 10:15:21.558] kernel.modules_disabled = 1 [2025-09-24 10:15:21.734] [2025-09-24 10:15:21.734] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:15:22.979] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:15:30.684] SBL1:1210.0.1.0 [2025-09-24 10:15:30.716] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:15:32.298] SBL2:1210.0.1.0 [2025-09-24 10:15:32.346] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:15:32.443] j-A [2025-09-24 10:15:39.796] The R5 Autosar Classic is running [2025-09-24 10:15:39.820] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:15:39.820] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:15:40.427] INIT: version 2.96 booting [2025-09-24 10:15:40.539] INIT: Entering runlevel: 5 [2025-09-24 10:15:40.683] mtd24 attached [2025-09-24 10:15:40.699] mtd28 attached [2025-09-24 10:15:40.715] mtd32 attached [2025-09-24 10:15:40.731] ubi0:textures is mounted. [2025-09-24 10:15:40.763] ubi1:animations is mounted. [2025-09-24 10:15:40.763] RTNETLINK answers: File exists [2025-09-24 10:15:40.823] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:15:40.823] ubi2:dml_code is mounted. [2025-09-24 10:15:40.823] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:15:40.823] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:15:40.823] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:15:40.823] data.LB_FadeInType0=100 [2025-09-24 10:15:40.823] data.CHLH_FadeInType0=0 [2025-09-24 10:15:40.823] data.WU_FadeInDelay=0 [2025-09-24 10:15:40.823] max_time_out=0 [2025-09-24 10:15:40.823] No splash screen [2025-09-24 10:15:40.823] stop dss Done [2025-09-24 10:15:40.823] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:15:40.855] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:15:40.901] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:15:40.901] /dev/mem opened. [2025-09-24 10:15:40.901] Memory mapped at address 0xffffb2c92000. [2025-09-24 10:15:40.901] Read at address 0x00600018 (0xffffb2c92018): 0x00000000 [2025-09-24 10:15:40.901] Write at address 0x00600018 (0xffffb2c92018): 0x00400040, readback 0x00400040 [2025-09-24 10:15:41.141] Loaded PowerVR consumer services. [2025-09-24 10:15:41.157] Waiting data available... [2025-09-24 10:15:41.189] 512+0 records in [2025-09-24 10:15:41.189] 512+0 records out [2025-09-24 10:15:41.237] Starting syslogd/klogd: done [2025-09-24 10:15:41.237] DML Start [2025-09-24 10:15:41.380] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:15:41.668] DML res1: 0 [2025-09-24 10:15:41.988] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:15:42.004] Read Success [2025-09-24 10:15:42.004] Verifying certificate... [2025-09-24 10:15:42.244] Verified OK [2025-09-24 10:15:42.259] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:15:43.921] Verified OK [2025-09-24 10:15:43.921] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:15:44.506] Verified OK [2025-09-24 10:15:44.506] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:15:47.192] fs.protected_hardlinks = 1 [2025-09-24 10:15:47.208] fs.protected_symlinks = 1 [2025-09-24 10:15:47.208] kernel.modules_disabled = 1 [2025-09-24 10:15:47.400] [2025-09-24 10:15:47.400] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:15:48.676] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:15:56.394] SBL1:1210.0.1.0 [2025-09-24 10:15:56.442] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:15:58.009] SBL2:1210.0.1.0 [2025-09-24 10:15:58.057] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:15:58.169] j-A [2025-09-24 10:16:05.506] The R5 Autosar Classic is running [2025-09-24 10:16:05.537] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:16:05.537] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:16:06.144] INIT: version 2.96 booting [2025-09-24 10:16:06.256] INIT: Entering runlevel: 5 [2025-09-24 10:16:06.400] mtd28 attached [2025-09-24 10:16:06.416] mtd24 attached [2025-09-24 10:16:06.432] mtd32 attached [2025-09-24 10:16:06.448] ubi0:animations is mounted. [2025-09-24 10:16:06.479] ubi1:textures is mounted. [2025-09-24 10:16:06.495] ubi2:dml_code is mounted. [2025-09-24 10:16:06.495] RTNETLINK answers: File exists [2025-09-24 10:16:06.557] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:16:06.557] data.LB_FadeInType0=100 [2025-09-24 10:16:06.557] data.CHLH_FadeInType0=0 [2025-09-24 10:16:06.557] data.WU_FadeInDelay=0 [2025-09-24 10:16:06.557] max_time_out=0 [2025-09-24 10:16:06.557] No splash screen [2025-09-24 10:16:06.557] stop dss Done [2025-09-24 10:16:06.557] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:16:06.557] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:16:06.557] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:16:06.557] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:16:06.573] /dev/mem opened. [2025-09-24 10:16:06.573] Memory mapped at address 0xffff91a9c000. [2025-09-24 10:16:06.599] Read at address 0x00600018 (0xffff91a9c018): 0x00000000 [2025-09-24 10:16:06.599] Write at address 0x00600018 (0xffff91a9c018): 0x00400040, readback 0x00400040 [2025-09-24 10:16:06.615] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:16:06.631] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:16:06.791] Loaded PowerVR consumer services. [2025-09-24 10:16:06.919] Waiting data available... [2025-09-24 10:16:06.935] 512+0 records in [2025-09-24 10:16:06.935] 512+0 records out [2025-09-24 10:16:06.966] Starting syslogd/klogd: done [2025-09-24 10:16:06.982] DML Start [2025-09-24 10:16:07.159] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:16:07.351] DML res1: 0 [2025-09-24 10:16:07.840] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:16:07.840] Read Success [2025-09-24 10:16:07.840] Verifying certificate... [2025-09-24 10:16:08.080] Verified OK [2025-09-24 10:16:08.095] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:16:09.774] Verified OK [2025-09-24 10:16:09.774] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:16:10.389] Verified OK [2025-09-24 10:16:10.389] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:16:13.027] fs.protected_hardlinks = 1 [2025-09-24 10:16:13.027] fs.protected_symlinks = 1 [2025-09-24 10:16:13.042] kernel.modules_disabled = 1 [2025-09-24 10:16:13.251] [2025-09-24 10:16:13.251] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:16:14.414] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:16:22.114] SBL1:1210.0.1.0 [2025-09-24 10:16:22.162] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:16:23.728] SBL2:1210.0.1.0 [2025-09-24 10:16:23.776] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:16:23.888] j-A [2025-09-24 10:16:31.256] The R5 Autosar Classic is running [2025-09-24 10:16:31.256] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:16:31.256] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:16:31.864] INIT: version 2.96 booting [2025-09-24 10:16:31.975] INIT: Entering runlevel: 5 [2025-09-24 10:16:32.136] mtd32 attached [2025-09-24 10:16:32.136] mtd28 attached [2025-09-24 10:16:32.136] mtd24 attached [2025-09-24 10:16:32.200] RTNETLINK answers: File exists [2025-09-24 10:16:32.200] ubi1:animations is mounted. [2025-09-24 10:16:32.233] ubi2:textures is mounted. [2025-09-24 10:16:32.233] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:16:32.233] ubi0:dml_code is mounted. [2025-09-24 10:16:32.233] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:16:32.233] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:16:32.265] data.LB_FadeInType0=100 [2025-09-24 10:16:32.265] data.CHLH_FadeInType0=0 [2025-09-24 10:16:32.265] data.WU_FadeInDelay=0 [2025-09-24 10:16:32.265] max_time_out=0 [2025-09-24 10:16:32.265] No splash screen [2025-09-24 10:16:32.265] stop dss Done [2025-09-24 10:16:32.265] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:16:32.265] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:16:32.297] /dev/mem opened. [2025-09-24 10:16:32.297] Memory mapped at address 0xffffb652a000. [2025-09-24 10:16:32.337] Read at address 0x00600018 (0xffffb652a018): 0x00000000 [2025-09-24 10:16:32.337] Write at address 0x00600018 (0xffffb652a018): 0x00400040, readback 0x00400040 [2025-09-24 10:16:32.337] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:16:32.337] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:16:32.481] Loaded PowerVR consumer services. [2025-09-24 10:16:32.625] Waiting data available... [2025-09-24 10:16:32.657] 512+0 records in [2025-09-24 10:16:32.657] 512+0 records out [2025-09-24 10:16:32.704] Starting syslogd/klogd: done [2025-09-24 10:16:32.720] DML Start [2025-09-24 10:16:32.881] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:16:33.137] DML res1: 0 [2025-09-24 10:16:33.532] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:16:33.532] Read Success [2025-09-24 10:16:33.532] Verifying certificate... [2025-09-24 10:16:33.788] Verified OK [2025-09-24 10:16:33.804] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:16:35.465] Verified OK [2025-09-24 10:16:35.465] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:16:36.046] Verified OK [2025-09-24 10:16:36.046] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:16:38.555] fs.protected_hardlinks = 1 [2025-09-24 10:16:38.571] fs.protected_symlinks = 1 [2025-09-24 10:16:38.571] kernel.modules_disabled = 1 [2025-09-24 10:16:38.779] [2025-09-24 10:16:38.779] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:16:40.149] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:16:47.832] SBL1:1210.0.1.0 [2025-09-24 10:16:47.880] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:16:49.447] SBL2:1210.0.1.0 [2025-09-24 10:16:49.495] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:16:49.607] j-A [2025-09-24 10:16:56.943] The R5 Autosar Classic is running [2025-09-24 10:16:56.974] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:16:56.974] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:16:57.582] INIT: version 2.96 booting [2025-09-24 10:16:57.694] INIT: Entering runlevel: 5 [2025-09-24 10:16:57.838] mtd28 attached [2025-09-24 10:16:57.854] mtd24 attached [2025-09-24 10:16:57.870] mtd32 attached [2025-09-24 10:16:57.886] ubi0:animations is mounted. [2025-09-24 10:16:57.918] ubi1:textures is mounted. [2025-09-24 10:16:57.918] RTNETLINK answers: File exists [2025-09-24 10:16:57.971] ubi2:dml_code is mounted. [2025-09-24 10:16:57.971] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:16:57.971] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:16:57.971] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:16:57.971] data.LB_FadeInType0=100 [2025-09-24 10:16:57.971] data.CHLH_FadeInType0=0 [2025-09-24 10:16:57.971] data.WU_FadeInDelay=0 [2025-09-24 10:16:57.971] max_time_out=0 [2025-09-24 10:16:57.971] No splash screen [2025-09-24 10:16:57.971] stop dss Done [2025-09-24 10:16:57.971] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:16:57.971] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:16:58.020] /dev/mem opened. [2025-09-24 10:16:58.020] Memory mapped at address 0xffffa6b8e000. [2025-09-24 10:16:58.020] Read at address 0x00600018 (0xffffa6b8e018): 0x00000000 [2025-09-24 10:16:58.020] Write at address 0x00600018 (0xffffa6b8e018): 0x00400040, readback 0x00400040 [2025-09-24 10:16:58.036] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:16:58.052] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:16:58.320] Loaded PowerVR consumer services. [2025-09-24 10:16:58.320] Waiting data available... [2025-09-24 10:16:58.352] 512+0 records in [2025-09-24 10:16:58.352] 512+0 records out [2025-09-24 10:16:58.401] Starting syslogd/klogd: done [2025-09-24 10:16:58.417] DML Start [2025-09-24 10:16:58.608] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:16:58.864] DML res1: 0 [2025-09-24 10:16:59.248] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:16:59.272] Read Success [2025-09-24 10:16:59.272] Verifying certificate... [2025-09-24 10:16:59.495] Verified OK [2025-09-24 10:16:59.511] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:17:01.296] Verified OK [2025-09-24 10:17:01.296] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:17:01.844] Verified OK [2025-09-24 10:17:01.844] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:17:04.275] fs.protected_hardlinks = 1 [2025-09-24 10:17:04.301] fs.protected_symlinks = 1 [2025-09-24 10:17:04.301] kernel.modules_disabled = 1 [2025-09-24 10:17:04.493] [2025-09-24 10:17:04.493] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:17:05.847] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:17:13.535] SBL1:1210.0.1.0 [2025-09-24 10:17:13.583] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:17:15.150] SBL2:1210.0.1.0 [2025-09-24 10:17:15.198] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:17:15.294] j-A [2025-09-24 10:17:22.647] The R5 Autosar Classic is running [2025-09-24 10:17:22.672] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:17:22.672] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:17:23.280] INIT: version 2.96 booting [2025-09-24 10:17:23.391] INIT: Entering runlevel: 5 [2025-09-24 10:17:23.551] mtd24 attached [2025-09-24 10:17:23.551] mtd28 attached [2025-09-24 10:17:23.567] mtd32 attached [2025-09-24 10:17:23.615] RTNETLINK answers: File exists [2025-09-24 10:17:23.615] ubi0:textures is mounted. [2025-09-24 10:17:23.663] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:17:23.663] ubi1:animations is mounted. [2025-09-24 10:17:23.663] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:17:23.663] ubi2:dml_code is mounted. [2025-09-24 10:17:23.663] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:17:23.663] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:17:23.663] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:17:23.687] data.LB_FadeInType0=100 [2025-09-24 10:17:23.687] data.CHLH_FadeInType0=0 [2025-09-24 10:17:23.687] data.WU_FadeInDelay=0 [2025-09-24 10:17:23.687] max_time_out=0 [2025-09-24 10:17:23.687] No splash screen [2025-09-24 10:17:23.687] stop dss Done [2025-09-24 10:17:23.714] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:17:23.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:17:23.753] /dev/mem opened. [2025-09-24 10:17:23.753] Memory mapped at address 0xffff8a9f1000. [2025-09-24 10:17:23.753] Read at address 0x00600018 (0xffff8a9f1018): 0x00000000 [2025-09-24 10:17:23.753] Write at address 0x00600018 (0xffff8a9f1018): 0x00400040, readback 0x00400040 [2025-09-24 10:17:23.832] Loaded PowerVR consumer services. [2025-09-24 10:17:24.025] Waiting data available... [2025-09-24 10:17:24.057] 512+0 records in [2025-09-24 10:17:24.057] 512+0 records out [2025-09-24 10:17:24.088] Starting syslogd/klogd: done [2025-09-24 10:17:24.120] DML Start [2025-09-24 10:17:24.296] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:17:24.568] DML res1: 0 [2025-09-24 10:17:24.919] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:17:24.919] Read Success [2025-09-24 10:17:24.919] Verifying certificate... [2025-09-24 10:17:25.175] Verified OK [2025-09-24 10:17:25.190] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:17:26.959] Verified OK [2025-09-24 10:17:26.959] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:17:27.535] Verified OK [2025-09-24 10:17:27.535] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:17:30.173] fs.protected_hardlinks = 1 [2025-09-24 10:17:30.173] fs.protected_symlinks = 1 [2025-09-24 10:17:30.189] kernel.modules_disabled = 1 [2025-09-24 10:17:30.364] [2025-09-24 10:17:30.364] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:17:31.541] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:17:39.242] SBL1:1210.0.1.0 [2025-09-24 10:17:39.290] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:17:40.856] SBL2:1210.0.1.0 [2025-09-24 10:17:40.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:17:41.000] j-A [2025-09-24 10:17:48.354] The R5 Autosar Classic is running [2025-09-24 10:17:48.379] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:17:48.379] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:17:48.986] INIT: version 2.96 booting [2025-09-24 10:17:49.098] INIT: Entering runlevel: 5 [2025-09-24 10:17:49.258] mtd28 attached [2025-09-24 10:17:49.258] mtd24 attached [2025-09-24 10:17:49.274] mtd32 attached [2025-09-24 10:17:49.306] ubi0:animations is mounted. [2025-09-24 10:17:49.321] RTNETLINK answers: File exists [2025-09-24 10:17:49.380] ubi1:textures is mounted. [2025-09-24 10:17:49.380] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:17:49.380] ubi2:dml_code is mounted. [2025-09-24 10:17:49.380] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:17:49.380] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:17:49.380] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:17:49.380] data.LB_FadeInType0=100 [2025-09-24 10:17:49.380] data.CHLH_FadeInType0=0 [2025-09-24 10:17:49.380] data.WU_FadeInDelay=0 [2025-09-24 10:17:49.380] max_time_out=0 [2025-09-24 10:17:49.380] No splash screen [2025-09-24 10:17:49.380] stop dss Done [2025-09-24 10:17:49.380] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:17:49.466] /dev/mem opened. [2025-09-24 10:17:49.466] Memory mapped at address 0xffff85733000. [2025-09-24 10:17:49.466] Read at address 0x00600018 (0xffff85733018): 0x00000000 [2025-09-24 10:17:49.466] Write at address 0x00600018 (0xffff85733018): 0x00400040, readback 0x00400040 [2025-09-24 10:17:49.466] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:17:49.466] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:17:49.530] Loaded PowerVR consumer services. [2025-09-24 10:17:49.738] Waiting data available... [2025-09-24 10:17:49.754] 512+0 records in [2025-09-24 10:17:49.754] 512+0 records out [2025-09-24 10:17:49.801] Starting syslogd/klogd: done [2025-09-24 10:17:49.817] DML Start [2025-09-24 10:17:49.978] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:17:50.169] DML res1: 0 [2025-09-24 10:17:50.708] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:17:50.708] Read Success [2025-09-24 10:17:50.708] Verifying certificate... [2025-09-24 10:17:50.932] Verified OK [2025-09-24 10:17:50.964] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:17:52.618] Verified OK [2025-09-24 10:17:52.618] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:17:53.267] Verified OK [2025-09-24 10:17:53.267] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:17:55.841] fs.protected_hardlinks = 1 [2025-09-24 10:17:55.841] fs.protected_symlinks = 1 [2025-09-24 10:17:55.857] kernel.modules_disabled = 1 [2025-09-24 10:17:56.065] [2025-09-24 10:17:56.065] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:17:57.255] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:18:04.949] SBL1:1210.0.1.0 [2025-09-24 10:18:04.981] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:18:06.565] SBL2:1210.0.1.0 [2025-09-24 10:18:06.612] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:18:06.708] j-A [2025-09-24 10:18:14.062] The R5 Autosar Classic is running [2025-09-24 10:18:14.083] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:18:14.083] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:18:14.691] INIT: version 2.96 booting [2025-09-24 10:18:14.803] INIT: Entering runlevel: 5 [2025-09-24 10:18:14.963] mtd24 attached [2025-09-24 10:18:14.979] mtd32 attached [2025-09-24 10:18:14.979] mtd28 attached [2025-09-24 10:18:15.026] RTNETLINK answers: File exists [2025-09-24 10:18:15.076] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:18:15.076] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:18:15.076] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:18:15.076] ubi0:textures is mounted. [2025-09-24 10:18:15.076] ubi2:animations is mounted. [2025-09-24 10:18:15.076] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:18:15.076] ubi1:dml_code is mounted. [2025-09-24 10:18:15.076] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:18:15.099] data.LB_FadeInType0=100 [2025-09-24 10:18:15.099] data.CHLH_FadeInType0=0 [2025-09-24 10:18:15.099] data.WU_FadeInDelay=0 [2025-09-24 10:18:15.099] max_time_out=0 [2025-09-24 10:18:15.099] No splash screen [2025-09-24 10:18:15.099] stop dss Done [2025-09-24 10:18:15.169] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:18:15.169] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:18:15.169] /dev/mem opened. [2025-09-24 10:18:15.169] Memory mapped at address 0xffffb2c1f000. [2025-09-24 10:18:15.169] Read at address 0x00600018 (0xffffb2c1f018): 0x00000000 [2025-09-24 10:18:15.169] Write at address 0x00600018 (0xffffb2c1f018): 0x00400040, readback 0x00400040 [2025-09-24 10:18:15.264] Loaded PowerVR consumer services. [2025-09-24 10:18:15.441] Waiting data available... [2025-09-24 10:18:15.473] 512+0 records in [2025-09-24 10:18:15.473] 512+0 records out [2025-09-24 10:18:15.504] Starting syslogd/klogd: done [2025-09-24 10:18:15.520] DML Start [2025-09-24 10:18:15.681] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:18:15.904] DML res1: 0 [2025-09-24 10:18:16.358] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:18:16.358] Read Success [2025-09-24 10:18:16.358] Verifying certificate... [2025-09-24 10:18:16.598] Verified OK [2025-09-24 10:18:16.614] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:18:18.260] Verified OK [2025-09-24 10:18:18.281] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:18:18.863] Verified OK [2025-09-24 10:18:18.863] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:18:21.580] fs.protected_hardlinks = 1 [2025-09-24 10:18:21.596] fs.protected_symlinks = 1 [2025-09-24 10:18:21.596] kernel.modules_disabled = 1 [2025-09-24 10:18:21.788] [2025-09-24 10:18:21.788] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:18:22.955] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:18:30.647] SBL1:1210.0.1.0 [2025-09-24 10:18:30.679] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:18:32.262] SBL2:1210.0.1.0 [2025-09-24 10:18:32.310] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:18:32.406] j-A [2025-09-24 10:18:39.760] The R5 Autosar Classic is running [2025-09-24 10:18:39.783] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:18:39.783] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:18:40.391] INIT: version 2.96 booting [2025-09-24 10:18:40.502] INIT: Entering runlevel: 5 [2025-09-24 10:18:40.663] mtd24 attached [2025-09-24 10:18:40.663] mtd28 attached [2025-09-24 10:18:40.679] mtd32 attached [2025-09-24 10:18:40.726] ubi0:textures is mounted. [2025-09-24 10:18:40.792] RTNETLINK answers: File exists [2025-09-24 10:18:40.792] ubi1:animations is mounted. [2025-09-24 10:18:40.792] ubi2:dml_code is mounted. [2025-09-24 10:18:40.792] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:18:40.792] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:18:40.792] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:18:40.792] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:18:40.792] data.LB_FadeInType0=100 [2025-09-24 10:18:40.792] data.CHLH_FadeInType0=0 [2025-09-24 10:18:40.792] data.WU_FadeInDelay=0 [2025-09-24 10:18:40.792] max_time_out=0 [2025-09-24 10:18:40.792] No splash screen [2025-09-24 10:18:40.792] stop dss Done [2025-09-24 10:18:40.792] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:18:40.879] /dev/mem opened. [2025-09-24 10:18:40.879] Memory mapped at address 0xffff87b52000. [2025-09-24 10:18:40.879] Read at address 0x00600018 (0xffff87b52018): 0x00000000 [2025-09-24 10:18:40.879] Write at address 0x00600018 (0xffff87b52018): 0x00400040, readback 0x00400040 [2025-09-24 10:18:40.879] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:18:40.895] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:18:41.071] Loaded PowerVR consumer services. [2025-09-24 10:18:41.134] Waiting data available... [2025-09-24 10:18:41.166] 512+0 records in [2025-09-24 10:18:41.166] 512+0 records out [2025-09-24 10:18:41.214] Starting syslogd/klogd: done [2025-09-24 10:18:41.230] DML Start [2025-09-24 10:18:41.390] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:18:41.646] DML res1: 0 [2025-09-24 10:18:42.092] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:18:42.092] Read Success [2025-09-24 10:18:42.092] Verifying certificate... [2025-09-24 10:18:42.315] Verified OK [2025-09-24 10:18:42.331] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:18:44.021] Verified OK [2025-09-24 10:18:44.021] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:18:44.590] Verified OK [2025-09-24 10:18:44.590] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:18:47.100] fs.protected_hardlinks = 1 [2025-09-24 10:18:47.116] fs.protected_symlinks = 1 [2025-09-24 10:18:47.132] kernel.modules_disabled = 1 [2025-09-24 10:18:47.324] [2025-09-24 10:18:47.324] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:18:48.648] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:18:56.359] SBL1:1210.0.1.0 [2025-09-24 10:18:56.407] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 10:18:57.973] SBL2:1210.0.1.0 [2025-09-24 10:18:58.021] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:18:58.134] j-A [2025-09-24 10:19:05.472] The R5 Autosar Classic is running [2025-09-24 10:19:05.497] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:19:05.497] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:19:06.105] INIT: version 2.96 booting [2025-09-24 10:19:06.217] INIT: Entering runlevel: 5 [2025-09-24 10:19:06.377] mtd32 attached [2025-09-24 10:19:06.377] mtd24 attached [2025-09-24 10:19:06.393] mtd28 attached [2025-09-24 10:19:06.409] ubi0:dml_code is mounted. [2025-09-24 10:19:06.440] RTNETLINK answers: File exists [2025-09-24 10:19:06.502] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:19:06.502] ubi1:textures is mounted. [2025-09-24 10:19:06.502] ubi2:animations is mounted. [2025-09-24 10:19:06.502] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:19:06.502] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:19:06.502] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:19:06.502] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:19:06.502] data.LB_FadeInType0=100 [2025-09-24 10:19:06.502] data.CHLH_FadeInType0=0 [2025-09-24 10:19:06.502] data.WU_FadeInDelay=0 [2025-09-24 10:19:06.502] max_time_out=0 [2025-09-24 10:19:06.502] No splash screen [2025-09-24 10:19:06.502] stop dss Done [2025-09-24 10:19:06.583] /dev/mem opened. [2025-09-24 10:19:06.583] Memory mapped at address 0xffff9a01d000. [2025-09-24 10:19:06.583] Read at address 0x00600018 (0xffff9a01d018): 0x00000000 [2025-09-24 10:19:06.583] Write at address 0x00600018 (0xffff9a01d018): 0x00400040, readback 0x00400040 [2025-09-24 10:19:06.583] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:19:06.583] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:19:06.791] Loaded PowerVR consumer services. [2025-09-24 10:19:06.887] Waiting data available... [2025-09-24 10:19:06.919] 512+0 records in [2025-09-24 10:19:06.919] 512+0 records out [2025-09-24 10:19:06.934] Starting syslogd/klogd: done [2025-09-24 10:19:06.950] DML Start [2025-09-24 10:19:07.127] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:19:07.383] DML res1: 0 [2025-09-24 10:19:07.764] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:19:07.764] Read Success [2025-09-24 10:19:07.764] Verifying certificate... [2025-09-24 10:19:07.988] Verified OK [2025-09-24 10:19:08.004] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:19:09.689] Verified OK [2025-09-24 10:19:09.689] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:19:10.287] Verified OK [2025-09-24 10:19:10.287] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:19:13.005] fs.protected_hardlinks = 1 [2025-09-24 10:19:13.005] fs.protected_symlinks = 1 [2025-09-24 10:19:13.021] kernel.modules_disabled = 1 [2025-09-24 10:19:13.229] [2025-09-24 10:19:13.229] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:19:14.428] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:19:22.058] SBL1:1210.0.1.0 [2025-09-24 10:19:22.106] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:19:23.673] SBL2:1210.0.1.0 [2025-09-24 10:19:23.721] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:19:23.833] j-A [2025-09-24 10:19:31.172] The R5 Autosar Classic is running [2025-09-24 10:19:31.203] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:19:31.203] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:19:31.811] INIT: version 2.96 booting [2025-09-24 10:19:31.922] INIT: Entering runlevel: 5 [2025-09-24 10:19:32.083] mtd24 attached [2025-09-24 10:19:32.083] mtd32 attached [2025-09-24 10:19:32.099] mtd28 attached [2025-09-24 10:19:32.131] ubi0:textures is mounted. [2025-09-24 10:19:32.146] RTNETLINK answers: File exists [2025-09-24 10:19:32.181] ubi2:animations is mounted. [2025-09-24 10:19:32.181] ubi1:dml_code is mounted. [2025-09-24 10:19:32.181] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:19:32.181] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:19:32.181] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:19:32.181] data.LB_FadeInType0=100 [2025-09-24 10:19:32.213] data.CHLH_FadeInType0=0 [2025-09-24 10:19:32.213] data.WU_FadeInDelay=0 [2025-09-24 10:19:32.213] max_time_out=0 [2025-09-24 10:19:32.213] No splash screen [2025-09-24 10:19:32.213] stop dss Done [2025-09-24 10:19:32.213] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:19:32.213] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:19:32.245] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:19:32.283] /dev/mem opened. [2025-09-24 10:19:32.283] Memory mapped at address 0xffff865c7000. [2025-09-24 10:19:32.283] Read at address 0x00600018 (0xffff865c7018): 0x00000000 [2025-09-24 10:19:32.283] Write at address 0x00600018 (0xffff865c7018): 0x00400040, readback 0x00400040 [2025-09-24 10:19:32.283] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:19:32.363] Loaded PowerVR consumer services. [2025-09-24 10:19:32.555] Waiting data available... [2025-09-24 10:19:32.587] 512+0 records in [2025-09-24 10:19:32.587] 512+0 records out [2025-09-24 10:19:32.634] Starting syslogd/klogd: done [2025-09-24 10:19:32.650] DML Start [2025-09-24 10:19:32.842] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:19:33.114] DML res1: 0 [2025-09-24 10:19:33.480] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:19:33.480] Read Success [2025-09-24 10:19:33.480] Verifying certificate... [2025-09-24 10:19:33.752] Verified OK [2025-09-24 10:19:33.768] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:19:35.398] Verified OK [2025-09-24 10:19:35.398] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:19:36.014] Verified OK [2025-09-24 10:19:36.014] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:19:36.765] 5478 GC [0] [2025-09-24 10:19:36.846] 5560 GC [1] [2025-09-24 10:19:36.910] 5627 GC [2] [2025-09-24 10:19:36.989] 5702 GC [3] [2025-09-24 10:19:37.069] 5780 GC [4] [2025-09-24 10:19:37.133] 5851 GC [5] [2025-09-24 10:19:37.198] 5919 GC [6] [2025-09-24 10:19:37.262] 5987 GC [7] [2025-09-24 10:19:37.341] 6048 GC [8] [2025-09-24 10:19:37.405] 6122 GC [9] [2025-09-24 10:19:37.469] 6190 GC [10] [2025-09-24 10:19:37.533] 6252 GC [11] [2025-09-24 10:19:37.613] 6332 GC [12] [2025-09-24 10:19:37.677] 6399 GC [13] [2025-09-24 10:19:37.741] 6451 GC [14] [2025-09-24 10:19:37.805] 6519 GC [15] [2025-09-24 10:19:37.853] 6571 GC [16] [2025-09-24 10:19:37.917] 6637 GC [17] [2025-09-24 10:19:37.981] 6691 GC [18] [2025-09-24 10:19:38.029] 6752 GC [19] [2025-09-24 10:19:38.093] 6809 GC [20] [2025-09-24 10:19:38.156] 6877 GC [21] [2025-09-24 10:19:38.220] 6938 GC [22] [2025-09-24 10:19:38.284] 6998 GC [23] [2025-09-24 10:19:38.348] 7059 GC [24] [2025-09-24 10:19:38.412] 7130 GC [25] [2025-09-24 10:19:38.476] 7189 GC [26] [2025-09-24 10:19:38.524] 7250 GC [27] [2025-09-24 10:19:38.588] 7307 GC [28] [2025-09-24 10:19:38.667] fs.protected_hardlinks = 1 [2025-09-24 10:19:38.667] fs.protected_symlinks = 1 [2025-09-24 10:19:38.667] 7380 GC [29] [2025-09-24 10:19:38.667] kernel.modules_disabled = 1 [2025-09-24 10:19:38.667] GC DONE [2025-09-24 10:19:38.859] [2025-09-24 10:19:38.859] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:19:40.050] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:19:47.753] SBL1:1210.0.1.0 [2025-09-24 10:19:47.784] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:19:49.367] SBL2:1210.0.1.0 [2025-09-24 10:19:49.400] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:19:49.511] j-A [2025-09-24 10:19:56.850] The R5 Autosar Classic is running [2025-09-24 10:19:56.875] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:19:56.875] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:19:57.483] INIT: version 2.96 booting [2025-09-24 10:19:57.595] INIT: Entering runlevel: 5 [2025-09-24 10:19:57.755] mtd28 attached [2025-09-24 10:19:57.755] mtd24 attached [2025-09-24 10:19:57.771] mtd32 attached [2025-09-24 10:19:57.803] ubi0:animations is mounted. [2025-09-24 10:19:57.882] RTNETLINK answers: File exists [2025-09-24 10:19:57.882] ubi1:textures is mounted. [2025-09-24 10:19:57.882] ubi2:dml_code is mounted. [2025-09-24 10:19:57.882] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:19:57.882] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:19:57.883] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:19:57.883] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:19:57.883] data.LB_FadeInType0=100 [2025-09-24 10:19:57.883] data.CHLH_FadeInType0=0 [2025-09-24 10:19:57.883] data.WU_FadeInDelay=0 [2025-09-24 10:19:57.883] max_time_out=0 [2025-09-24 10:19:57.883] No splash screen [2025-09-24 10:19:57.883] stop dss Done [2025-09-24 10:19:57.883] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:19:57.956] /dev/mem opened. [2025-09-24 10:19:57.956] Memory mapped at address 0xffffb41e4000. [2025-09-24 10:19:57.956] Read at address 0x00600018 (0xffffb41e4018): 0x00000000 [2025-09-24 10:19:57.956] Write at address 0x00600018 (0xffffb41e4018): 0x00400040, readback 0x00400040 [2025-09-24 10:19:57.956] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:19:57.956] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:19:58.053] Loaded PowerVR consumer services. [2025-09-24 10:19:58.190] Waiting data available... [2025-09-24 10:19:58.190] 512+0 records in [2025-09-24 10:19:58.190] 512+0 records out [2025-09-24 10:19:58.222] Starting syslogd/klogd: done [2025-09-24 10:19:58.238] DML Start [2025-09-24 10:19:58.430] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:19:58.654] DML res1: 0 [2025-09-24 10:19:59.096] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:19:59.096] Read Success [2025-09-24 10:19:59.096] Verifying certificate... [2025-09-24 10:19:59.319] Verified OK [2025-09-24 10:19:59.335] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:20:01.150] Verified OK [2025-09-24 10:20:01.150] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:20:01.694] Verified OK [2025-09-24 10:20:01.715] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:20:04.192] fs.protected_hardlinks = 1 [2025-09-24 10:20:04.192] fs.protected_symlinks = 1 [2025-09-24 10:20:04.192] kernel.modules_disabled = 1 [2025-09-24 10:20:04.383] [2025-09-24 10:20:04.383] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:20:05.758] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:20:13.455] SBL1:1210.0.1.0 [2025-09-24 10:20:13.487] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:20:15.070] SBL2:1210.0.1.0 [2025-09-24 10:20:15.102] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:20:15.213] j-A [2025-09-24 10:20:22.552] The R5 Autosar Classic is running [2025-09-24 10:20:22.583] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:20:22.583] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:20:23.191] INIT: version 2.96 booting [2025-09-24 10:20:23.302] INIT: Entering runlevel: 5 [2025-09-24 10:20:23.446] mtd24 attached [2025-09-24 10:20:23.462] mtd28 attached [2025-09-24 10:20:23.478] mtd32 attached [2025-09-24 10:20:23.510] ubi1:animations is mounted. [2025-09-24 10:20:23.582] ubi0:textures is mounted. [2025-09-24 10:20:23.582] RTNETLINK answers: File exists [2025-09-24 10:20:23.582] ubi2:dml_code is mounted. [2025-09-24 10:20:23.582] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:20:23.582] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:20:23.582] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:20:23.582] data.LB_FadeInType0=100 [2025-09-24 10:20:23.582] data.CHLH_FadeInType0=0 [2025-09-24 10:20:23.582] data.WU_FadeInDelay=0 [2025-09-24 10:20:23.582] max_time_out=0 [2025-09-24 10:20:23.582] No splash screen [2025-09-24 10:20:23.582] stop dss Done [2025-09-24 10:20:23.582] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:20:23.582] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:20:23.613] /dev/mem opened. [2025-09-24 10:20:23.639] Memory mapped at address 0xffffa6867000. [2025-09-24 10:20:23.639] Read at address 0x00600018 (0xffffa6867018): 0x00000000 [2025-09-24 10:20:23.639] Write at address 0x00600018 (0xffffa6867018): 0x00400040, readback 0x00400040 [2025-09-24 10:20:23.671] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:20:23.687] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:20:23.847] Loaded PowerVR consumer services. [2025-09-24 10:20:23.879] 512+0 records in [2025-09-24 10:20:23.879] 512+0 records out [2025-09-24 10:20:23.911] Waiting data available... [2025-09-24 10:20:23.927] Starting syslogd/klogd: done [2025-09-24 10:20:23.943] DML Start [2025-09-24 10:20:24.119] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:20:24.375] DML res1: 0 [2025-09-24 10:20:24.817] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:20:24.817] Read Success [2025-09-24 10:20:24.817] Verifying certificate... [2025-09-24 10:20:25.104] Verified OK [2025-09-24 10:20:25.120] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:20:26.741] Verified OK [2025-09-24 10:20:26.741] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:20:27.387] Verified OK [2025-09-24 10:20:27.387] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:20:29.913] fs.protected_hardlinks = 1 [2025-09-24 10:20:29.929] fs.protected_symlinks = 1 [2025-09-24 10:20:29.945] kernel.modules_disabled = 1 [2025-09-24 10:20:30.153] [2025-09-24 10:20:30.153] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:20:31.475] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:20:39.159] SBL1:1210.0.1.0 [2025-09-24 10:20:39.191] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:20:40.773] SBL2:1210.0.1.0 [2025-09-24 10:20:40.806] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:20:40.902] j-A [2025-09-24 10:20:48.255] The R5 Autosar Classic is running [2025-09-24 10:20:48.281] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:20:48.281] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:20:48.888] INIT: version 2.96 booting [2025-09-24 10:20:49.000] INIT: Entering runlevel: 5 [2025-09-24 10:20:49.144] mtd24 attached [2025-09-24 10:20:49.160] mtd32 attached [2025-09-24 10:20:49.175] mtd28 attached [2025-09-24 10:20:49.207] ubi0:textures is mounted. [2025-09-24 10:20:49.223] RTNETLINK answers: File exists [2025-09-24 10:20:49.281] ubi1:dml_code is mounted. [2025-09-24 10:20:49.281] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:20:49.281] ubi2:animations is mounted. [2025-09-24 10:20:49.281] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:20:49.281] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:20:49.281] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:20:49.281] data.LB_FadeInType0=100 [2025-09-24 10:20:49.281] data.CHLH_FadeInType0=0 [2025-09-24 10:20:49.281] data.WU_FadeInDelay=0 [2025-09-24 10:20:49.281] max_time_out=0 [2025-09-24 10:20:49.281] No splash screen [2025-09-24 10:20:49.281] stop dss Done [2025-09-24 10:20:49.281] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:20:49.329] /dev/mem opened. [2025-09-24 10:20:49.329] Memory mapped at address 0xffffb2044000. [2025-09-24 10:20:49.361] Read at address 0x00600018 (0xffffb2044018): 0x00000000 [2025-09-24 10:20:49.361] Write at address 0x00600018 (0xffffb2044018): 0x00400040, readback 0x00400040 [2025-09-24 10:20:49.361] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:20:49.361] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:20:49.505] Loaded PowerVR consumer services. [2025-09-24 10:20:49.585] Waiting data available... [2025-09-24 10:20:49.601] 512+0 records in [2025-09-24 10:20:49.601] 512+0 records out [2025-09-24 10:20:49.617] Starting syslogd/klogd: done [2025-09-24 10:20:49.649] DML Start [2025-09-24 10:20:49.840] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:20:50.064] DML res1: 0 [2025-09-24 10:20:50.510] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:20:50.510] Read Success [2025-09-24 10:20:50.510] Verifying certificate... [2025-09-24 10:20:50.782] Verified OK [2025-09-24 10:20:50.798] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:20:52.517] Verified OK [2025-09-24 10:20:52.517] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:20:53.135] Verified OK [2025-09-24 10:20:53.135] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:20:55.756] fs.protected_hardlinks = 1 [2025-09-24 10:20:55.756] fs.protected_symlinks = 1 [2025-09-24 10:20:55.756] kernel.modules_disabled = 1 [2025-09-24 10:20:55.963] [2025-09-24 10:20:55.963] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:20:57.141] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:21:05.061] SBL1:1210.0.1.0 [2025-09-24 10:21:05.109] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:21:06.676] SBL2:1210.0.1.0 [2025-09-24 10:21:06.707] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:21:06.819] j-A [2025-09-24 10:21:14.193] The R5 Autosar Classic is running [2025-09-24 10:21:14.194] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:21:14.194] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:21:14.801] INIT: version 2.96 booting [2025-09-24 10:21:14.913] INIT: Entering runlevel: 5 [2025-09-24 10:21:15.073] mtd24 attached [2025-09-24 10:21:15.089] mtd32 attached [2025-09-24 10:21:15.105] mtd28 attached [2025-09-24 10:21:15.121] ubi0:textures is mounted. [2025-09-24 10:21:15.121] ubi1:dml_code is mounted. [2025-09-24 10:21:15.204] RTNETLINK answers: File exists [2025-09-24 10:21:15.204] ubi2:animations is mounted. [2025-09-24 10:21:15.204] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:21:15.204] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:21:15.204] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:21:15.204] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:21:15.204] data.LB_FadeInType0=100 [2025-09-24 10:21:15.204] data.CHLH_FadeInType0=0 [2025-09-24 10:21:15.204] data.WU_FadeInDelay=0 [2025-09-24 10:21:15.204] max_time_out=0 [2025-09-24 10:21:15.204] No splash screen [2025-09-24 10:21:15.204] stop dss Done [2025-09-24 10:21:15.204] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:21:15.274] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:21:15.274] /dev/mem opened. [2025-09-24 10:21:15.274] Memory mapped at address 0xffff93505000. [2025-09-24 10:21:15.274] Read at address 0x00600018 (0xffff93505018): 0x00000000 [2025-09-24 10:21:15.274] Write at address 0x00600018 (0xffff93505018): 0x00400040, readback 0x00400040 [2025-09-24 10:21:15.274] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:21:15.449] Loaded PowerVR consumer services. [2025-09-24 10:21:15.482] 512+0 records in [2025-09-24 10:21:15.482] 512+0 records out [2025-09-24 10:21:15.530] Starting syslogd/klogd: done [2025-09-24 10:21:15.578] Waiting data available... [2025-09-24 10:21:15.578] DML Start [2025-09-24 10:21:15.802] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:21:16.073] DML res1: 0 [2025-09-24 10:21:16.569] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:21:16.590] Read Success [2025-09-24 10:21:16.590] Verifying certificate... [2025-09-24 10:21:16.878] Verified OK [2025-09-24 10:21:16.894] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:21:18.403] Verified OK [2025-09-24 10:21:18.403] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:21:18.962] Verified OK [2025-09-24 10:21:18.962] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:21:21.664] fs.protected_hardlinks = 1 [2025-09-24 10:21:21.664] fs.protected_symlinks = 1 [2025-09-24 10:21:21.664] kernel.modules_disabled = 1 [2025-09-24 10:21:21.856] [2025-09-24 10:21:21.856] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:21:23.030] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:21:30.767] SBL1:1210.0.1.0 [2025-09-24 10:21:30.799] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:21:32.381] SBL2:1210.0.1.0 [2025-09-24 10:21:32.414] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:21:32.526] j-A [2025-09-24 10:21:39.897] The R5 Autosar Classic is running [2025-09-24 10:21:39.897] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:21:39.897] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:21:40.503] INIT: version 2.96 booting [2025-09-24 10:21:40.616] INIT: Entering runlevel: 5 [2025-09-24 10:21:40.775] mtd28 attached [2025-09-24 10:21:40.775] mtd32 attached [2025-09-24 10:21:40.791] mtd24 attached [2025-09-24 10:21:40.807] ubi0:animations is mounted. [2025-09-24 10:21:40.839] RTNETLINK answers: File exists [2025-09-24 10:21:40.900] ubi2:textures is mounted. [2025-09-24 10:21:40.900] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:21:40.900] ubi1:dml_code is mounted. [2025-09-24 10:21:40.900] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:21:40.900] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:21:40.900] data.LB_FadeInType0=100 [2025-09-24 10:21:40.900] data.CHLH_FadeInType0=0 [2025-09-24 10:21:40.900] data.WU_FadeInDelay=0 [2025-09-24 10:21:40.900] max_time_out=0 [2025-09-24 10:21:40.900] No splash screen [2025-09-24 10:21:40.900] stop dss Done [2025-09-24 10:21:40.900] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:21:40.900] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:21:40.932] /dev/mem opened. [2025-09-24 10:21:40.932] Memory mapped at address 0xffffbd23b000. [2025-09-24 10:21:40.964] Read at address 0x00600018 (0xffffbd23b018): 0x00000000 [2025-09-24 10:21:40.964] Write at address 0x00600018 (0xffffbd23b018): 0x00400040, readback 0x00400040 [2025-09-24 10:21:40.964] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:21:40.980] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:21:41.156] Loaded PowerVR consumer services. [2025-09-24 10:21:41.172] 512+0 records in [2025-09-24 10:21:41.172] 512+0 records out [2025-09-24 10:21:41.236] Starting syslogd/klogd: done [2025-09-24 10:21:41.284] Waiting data available... [2025-09-24 10:21:41.284] DML Start [2025-09-24 10:21:41.476] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:21:41.683] DML res1: 0 [2025-09-24 10:21:42.138] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:21:42.138] Read Success [2025-09-24 10:21:42.138] Verifying certificate... [2025-09-24 10:21:42.393] Verified OK [2025-09-24 10:21:42.393] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:21:43.940] Verified OK [2025-09-24 10:21:43.940] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:21:44.483] Verified OK [2025-09-24 10:21:44.483] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:21:47.250] fs.protected_hardlinks = 1 [2025-09-24 10:21:47.266] fs.protected_symlinks = 1 [2025-09-24 10:21:47.266] kernel.modules_disabled = 1 [2025-09-24 10:21:47.457] [2025-09-24 10:21:47.457] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:21:48.764] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:21:56.475] SBL1:1210.0.1.0 [2025-09-24 10:21:56.523] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:21:58.089] SBL2:1210.0.1.0 [2025-09-24 10:21:58.137] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:21:58.232] j-A [2025-09-24 10:22:05.587] The R5 Autosar Classic is running [2025-09-24 10:22:05.610] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:22:05.610] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:22:06.217] INIT: version 2.96 booting [2025-09-24 10:22:06.329] INIT: Entering runlevel: 5 [2025-09-24 10:22:06.473] mtd28 attached [2025-09-24 10:22:06.489] mtd32 attached [2025-09-24 10:22:06.505] mtd24 attached [2025-09-24 10:22:06.537] ubi0:animations is mounted. [2025-09-24 10:22:06.613] RTNETLINK answers: File exists [2025-09-24 10:22:06.613] ubi1:dml_code is mounted. [2025-09-24 10:22:06.613] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:22:06.613] ubi2:textures is mounted. [2025-09-24 10:22:06.613] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:22:06.613] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:22:06.613] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:22:06.613] data.LB_FadeInType0=100 [2025-09-24 10:22:06.613] data.CHLH_FadeInType0=0 [2025-09-24 10:22:06.613] data.WU_FadeInDelay=0 [2025-09-24 10:22:06.613] max_time_out=0 [2025-09-24 10:22:06.613] No splash screen [2025-09-24 10:22:06.613] stop dss Done [2025-09-24 10:22:06.613] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:22:06.671] /dev/mem opened. [2025-09-24 10:22:06.671] Memory mapped at address 0xffff821a8000. [2025-09-24 10:22:06.671] Read at address 0x00600018 (0xffff821a8018): 0x00000000 [2025-09-24 10:22:06.671] Write at address 0x00600018 (0xffff821a8018): 0x00400040, readback 0x00400040 [2025-09-24 10:22:06.703] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:22:06.719] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:22:06.878] Loaded PowerVR consumer services. [2025-09-24 10:22:06.910] 512+0 records in [2025-09-24 10:22:06.910] 512+0 records out [2025-09-24 10:22:06.942] Waiting data available... [2025-09-24 10:22:06.958] Starting syslogd/klogd: done [2025-09-24 10:22:06.974] DML Start [2025-09-24 10:22:07.166] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:22:07.406] DML res1: 0 [2025-09-24 10:22:07.844] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:22:07.844] Read Success [2025-09-24 10:22:07.844] Verifying certificate... [2025-09-24 10:22:08.068] Verified OK [2025-09-24 10:22:08.084] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:22:09.768] Verified OK [2025-09-24 10:22:09.768] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:22:10.450] Verified OK [2025-09-24 10:22:10.450] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:22:13.104] fs.protected_hardlinks = 1 [2025-09-24 10:22:13.120] fs.protected_symlinks = 1 [2025-09-24 10:22:13.120] kernel.modules_disabled = 1 [2025-09-24 10:22:13.312] [2025-09-24 10:22:13.312] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:22:14.493] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:22:22.202] SBL1:1210.0.1.0 [2025-09-24 10:22:22.250] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:22:23.816] SBL2:1210.0.1.0 [2025-09-24 10:22:23.848] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:22:23.961] j-A [2025-09-24 10:22:31.335] The R5 Autosar Classic is running [2025-09-24 10:22:31.335] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:22:31.335] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:22:31.942] INIT: version 2.96 booting [2025-09-24 10:22:32.055] INIT: Entering runlevel: 5 [2025-09-24 10:22:32.198] mtd24 attached [2025-09-24 10:22:32.214] mtd28 attached [2025-09-24 10:22:32.230] mtd32 attached [2025-09-24 10:22:32.246] ubi0:textures is mounted. [2025-09-24 10:22:32.278] RTNETLINK answers: File exists [2025-09-24 10:22:32.278] ubi1:animations is mounted. [2025-09-24 10:22:32.312] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:22:32.312] ubi2:dml_code is mounted. [2025-09-24 10:22:32.312] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:22:32.312] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:22:32.312] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:22:32.338] data.LB_FadeInType0=100 [2025-09-24 10:22:32.338] data.CHLH_FadeInType0=0 [2025-09-24 10:22:32.338] data.WU_FadeInDelay=0 [2025-09-24 10:22:32.338] max_time_out=0 [2025-09-24 10:22:32.338] No splash screen [2025-09-24 10:22:32.338] stop dss Done [2025-09-24 10:22:32.338] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:22:32.386] /dev/mem opened. [2025-09-24 10:22:32.425] Memory mapped at address 0xffff98a61000. [2025-09-24 10:22:32.425] Read at address 0x00600018 (0xffff98a61018): 0x00000000 [2025-09-24 10:22:32.425] Write at address 0x00600018 (0xffff98a61018): 0x00400040, readback 0x00400040 [2025-09-24 10:22:32.425] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:22:32.425] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:22:32.505] Loaded PowerVR consumer services. [2025-09-24 10:22:32.633] 512+0 records in [2025-09-24 10:22:32.633] 512+0 records out [2025-09-24 10:22:32.648] Waiting data available... [2025-09-24 10:22:32.681] Starting syslogd/klogd: done [2025-09-24 10:22:32.697] DML Start [2025-09-24 10:22:32.873] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:22:33.097] DML res1: 0 [2025-09-24 10:22:33.528] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:22:33.528] Read Success [2025-09-24 10:22:33.528] Verifying certificate... [2025-09-24 10:22:33.751] Verified OK [2025-09-24 10:22:33.767] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:22:35.441] Verified OK [2025-09-24 10:22:35.441] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:22:36.032] Verified OK [2025-09-24 10:22:36.048] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:22:38.687] fs.protected_hardlinks = 1 [2025-09-24 10:22:38.702] fs.protected_symlinks = 1 [2025-09-24 10:22:38.702] kernel.modules_disabled = 1 [2025-09-24 10:22:38.895] [2025-09-24 10:22:38.895] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:22:40.238] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:22:47.908] SBL1:1210.0.1.0 [2025-09-24 10:22:47.939] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:22:49.522] SBL2:1210.0.1.0 [2025-09-24 10:22:49.554] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:22:49.667] j-A [2025-09-24 10:22:57.036] The R5 Autosar Classic is running [2025-09-24 10:22:57.036] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:22:57.036] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:22:57.644] INIT: version 2.96 booting [2025-09-24 10:22:57.755] INIT: Entering runlevel: 5 [2025-09-24 10:22:57.915] mtd24 attached [2025-09-24 10:22:57.915] mtd32 attached [2025-09-24 10:22:57.931] mtd28 attached [2025-09-24 10:22:57.979] RTNETLINK answers: File exists [2025-09-24 10:22:57.979] ubi0:textures is mounted. [2025-09-24 10:22:58.043] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:22:58.043] ubi1:dml_code is mounted. [2025-09-24 10:22:58.043] ubi2:animations is mounted. [2025-09-24 10:22:58.043] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:22:58.043] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:22:58.043] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:22:58.043] data.LB_FadeInType0=100 [2025-09-24 10:22:58.043] data.CHLH_FadeInType0=0 [2025-09-24 10:22:58.043] data.WU_FadeInDelay=0 [2025-09-24 10:22:58.043] max_time_out=0 [2025-09-24 10:22:58.043] No splash screen [2025-09-24 10:22:58.043] stop dss Done [2025-09-24 10:22:58.043] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:22:58.125] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:22:58.125] /dev/mem opened. [2025-09-24 10:22:58.125] Memory mapped at address 0xffffb5486000. [2025-09-24 10:22:58.125] Read at address 0x00600018 (0xffffb5486018): 0x00000000 [2025-09-24 10:22:58.125] Write at address 0x00600018 (0xffffb5486018): 0x00400040, readback 0x00400040 [2025-09-24 10:22:58.125] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:22:58.301] Loaded PowerVR consumer services. [2025-09-24 10:22:58.333] 512+0 records in [2025-09-24 10:22:58.333] 512+0 records out [2025-09-24 10:22:58.365] Waiting data available... [2025-09-24 10:22:58.381] Starting syslogd/klogd: done [2025-09-24 10:22:58.396] DML Start [2025-09-24 10:22:58.573] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:22:58.797] DML res1: 0 [2025-09-24 10:22:59.266] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:22:59.266] Read Success [2025-09-24 10:22:59.266] Verifying certificate... [2025-09-24 10:22:59.490] Verified OK [2025-09-24 10:22:59.506] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:23:01.131] Verified OK [2025-09-24 10:23:01.131] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:23:01.748] Verified OK [2025-09-24 10:23:01.748] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:23:04.498] fs.protected_hardlinks = 1 [2025-09-24 10:23:04.514] fs.protected_symlinks = 1 [2025-09-24 10:23:04.514] kernel.modules_disabled = 1 [2025-09-24 10:23:04.706] [2025-09-24 10:23:04.706] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:23:05.905] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:23:13.597] SBL1:1210.0.1.0 [2025-09-24 10:23:13.645] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:23:15.211] SBL2:1210.0.1.0 [2025-09-24 10:23:15.243] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:23:15.356] j-A [2025-09-24 10:23:22.726] The R5 Autosar Classic is running [2025-09-24 10:23:22.726] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:23:22.726] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:23:23.334] INIT: version 2.96 booting [2025-09-24 10:23:23.445] INIT: Entering runlevel: 5 [2025-09-24 10:23:23.605] mtd28 attached [2025-09-24 10:23:23.621] mtd32 attached [2025-09-24 10:23:23.638] mtd24 attached [2025-09-24 10:23:23.654] ubi0:animations is mounted. [2025-09-24 10:23:23.670] RTNETLINK answers: File exists [2025-09-24 10:23:23.737] ubi1:dml_code is mounted. [2025-09-24 10:23:23.737] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:23:23.737] ubi2:textures is mounted. [2025-09-24 10:23:23.737] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:23:23.737] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:23:23.737] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:23:23.737] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:23:23.737] data.LB_FadeInType0=100 [2025-09-24 10:23:23.737] data.CHLH_FadeInType0=0 [2025-09-24 10:23:23.737] data.WU_FadeInDelay=0 [2025-09-24 10:23:23.737] max_time_out=0 [2025-09-24 10:23:23.737] No splash screen [2025-09-24 10:23:23.737] stop dss Done [2025-09-24 10:23:23.752] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:23:23.768] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:23:23.784] /dev/mem opened. [2025-09-24 10:23:23.784] Memory mapped at address 0xffffb7926000. [2025-09-24 10:23:23.810] Read at address 0x00600018 (0xffffb7926018): 0x00000000 [2025-09-24 10:23:23.810] Write at address 0x00600018 (0xffffb7926018): 0x00400040, readback 0x00400040 [2025-09-24 10:23:23.906] Loaded PowerVR consumer services. [2025-09-24 10:23:24.034] 512+0 records in [2025-09-24 10:23:24.034] 512+0 records out [2025-09-24 10:23:24.050] Waiting data available... [2025-09-24 10:23:24.050] Starting syslogd/klogd: done [2025-09-24 10:23:24.082] DML Start [2025-09-24 10:23:24.242] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:23:24.418] DML res1: 0 [2025-09-24 10:23:24.927] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:23:24.927] Read Success [2025-09-24 10:23:24.927] Verifying certificate... [2025-09-24 10:23:25.216] Verified OK [2025-09-24 10:23:25.231] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:23:26.837] Verified OK [2025-09-24 10:23:26.837] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:23:27.537] Verified OK [2025-09-24 10:23:27.537] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:23:30.175] fs.protected_hardlinks = 1 [2025-09-24 10:23:30.175] fs.protected_symlinks = 1 [2025-09-24 10:23:30.192] kernel.modules_disabled = 1 [2025-09-24 10:23:30.383] [2025-09-24 10:23:30.383] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:23:31.594] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:23:39.290] SBL1:1210.0.1.0 [2025-09-24 10:23:39.338] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:23:40.905] SBL2:1210.0.1.0 [2025-09-24 10:23:40.937] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:23:41.049] j-A [2025-09-24 10:23:48.420] The R5 Autosar Classic is running [2025-09-24 10:23:48.420] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:23:48.420] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:23:49.027] INIT: version 2.96 booting [2025-09-24 10:23:49.140] INIT: Entering runlevel: 5 [2025-09-24 10:23:49.283] mtd24 attached [2025-09-24 10:23:49.299] mtd28 attached [2025-09-24 10:23:49.315] mtd32 attached [2025-09-24 10:23:49.363] RTNETLINK answers: File exists [2025-09-24 10:23:49.404] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:23:49.404] ubi0:textures is mounted. [2025-09-24 10:23:49.404] ubi1:animations is mounted. [2025-09-24 10:23:49.404] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:23:49.404] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:23:49.404] ubi2:dml_code is mounted. [2025-09-24 10:23:49.404] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:23:49.404] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:23:49.429] data.LB_FadeInType0=100 [2025-09-24 10:23:49.429] data.CHLH_FadeInType0=0 [2025-09-24 10:23:49.429] data.WU_FadeInDelay=0 [2025-09-24 10:23:49.429] max_time_out=0 [2025-09-24 10:23:49.429] No splash screen [2025-09-24 10:23:49.429] stop dss Done [2025-09-24 10:23:49.445] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:23:49.461] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:23:49.514] /dev/mem opened. [2025-09-24 10:23:49.514] Memory mapped at address 0xffffbb959000. [2025-09-24 10:23:49.514] Read at address 0x00600018 (0xffffbb959018): 0x00000000 [2025-09-24 10:23:49.514] Write at address 0x00600018 (0xffffbb959018): 0x00400040, readback 0x00400040 [2025-09-24 10:23:49.594] Loaded PowerVR consumer services. [2025-09-24 10:23:49.705] 512+0 records in [2025-09-24 10:23:49.705] 512+0 records out [2025-09-24 10:23:49.737] Waiting data available... [2025-09-24 10:23:49.753] Starting syslogd/klogd: done [2025-09-24 10:23:49.769] DML Start [2025-09-24 10:23:49.977] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:23:50.185] DML res1: 0 [2025-09-24 10:23:50.625] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:23:50.625] Read Success [2025-09-24 10:23:50.625] Verifying certificate... [2025-09-24 10:23:50.880] Verified OK [2025-09-24 10:23:50.896] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:23:52.605] Verified OK [2025-09-24 10:23:52.605] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:23:53.213] Verified OK [2025-09-24 10:23:53.213] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:23:55.802] fs.protected_hardlinks = 1 [2025-09-24 10:23:55.802] fs.protected_symlinks = 1 [2025-09-24 10:23:55.818] kernel.modules_disabled = 1 [2025-09-24 10:23:56.026] [2025-09-24 10:23:56.026] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:23:57.283] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:24:05.012] SBL1:1210.0.1.0 [2025-09-24 10:24:05.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:24:06.628] SBL2:1210.0.1.0 [2025-09-24 10:24:06.659] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:24:06.771] j-A [2025-09-24 10:24:14.109] The R5 Autosar Classic is running [2025-09-24 10:24:14.135] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:24:14.135] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:24:14.742] INIT: version 2.96 booting [2025-09-24 10:24:14.854] INIT: Entering runlevel: 5 [2025-09-24 10:24:15.014] mtd24 attached [2025-09-24 10:24:15.014] mtd28 attached [2025-09-24 10:24:15.029] mtd32 attached [2025-09-24 10:24:15.078] RTNETLINK answers: File exists [2025-09-24 10:24:15.078] ubi1:animations is mounted. [2025-09-24 10:24:15.114] ubi0:textures is mounted. [2025-09-24 10:24:15.114] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:24:15.114] ubi2:dml_code is mounted. [2025-09-24 10:24:15.114] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:24:15.114] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:24:15.146] data.LB_FadeInType0=100 [2025-09-24 10:24:15.146] data.CHLH_FadeInType0=0 [2025-09-24 10:24:15.146] data.WU_FadeInDelay=0 [2025-09-24 10:24:15.146] max_time_out=0 [2025-09-24 10:24:15.146] No splash screen [2025-09-24 10:24:15.146] stop dss Done [2025-09-24 10:24:15.146] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:24:15.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:24:15.194] /dev/mem opened. [2025-09-24 10:24:15.194] Memory mapped at address 0xffff8ccd4000. [2025-09-24 10:24:15.235] Read at address 0x00600018 (0xffff8ccd4018): 0x00000000 [2025-09-24 10:24:15.235] Write at address 0x00600018 (0xffff8ccd4018): 0x00400040, readback 0x00400040 [2025-09-24 10:24:15.235] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:24:15.235] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:24:15.394] Loaded PowerVR consumer services. [2025-09-24 10:24:15.427] 512+0 records in [2025-09-24 10:24:15.427] 512+0 records out [2025-09-24 10:24:15.491] Waiting data available... [2025-09-24 10:24:15.491] Starting syslogd/klogd: done [2025-09-24 10:24:15.507] DML Start [2025-09-24 10:24:15.699] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:24:15.906] DML res1: 0 [2025-09-24 10:24:16.399] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:24:16.399] Read Success [2025-09-24 10:24:16.399] Verifying certificate... [2025-09-24 10:24:16.622] Verified OK [2025-09-24 10:24:16.638] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:24:18.221] Verified OK [2025-09-24 10:24:18.221] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:24:18.874] Verified OK [2025-09-24 10:24:18.874] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:24:21.592] fs.protected_hardlinks = 1 [2025-09-24 10:24:21.592] fs.protected_symlinks = 1 [2025-09-24 10:24:21.608] kernel.modules_disabled = 1 [2025-09-24 10:24:21.800] [2025-09-24 10:24:21.800] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:24:22.994] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:24:30.714] SBL1:1210.0.1.0 [2025-09-24 10:24:30.762] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:24:32.328] SBL2:1210.0.1.0 [2025-09-24 10:24:32.360] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:24:32.472] j-A [2025-09-24 10:24:39.843] The R5 Autosar Classic is running [2025-09-24 10:24:39.843] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:24:39.843] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:24:40.450] INIT: version 2.96 booting [2025-09-24 10:24:40.563] INIT: Entering runlevel: 5 [2025-09-24 10:24:40.706] mtd24 attached [2025-09-24 10:24:40.722] mtd28 attached [2025-09-24 10:24:40.722] mtd32 attached [2025-09-24 10:24:40.771] ubi0:textures is mounted. [2025-09-24 10:24:40.787] RTNETLINK answers: File exists [2025-09-24 10:24:40.787] ubi1:animations is mounted. [2025-09-24 10:24:40.842] ubi2:dml_code is mounted. [2025-09-24 10:24:40.842] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:24:40.842] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:24:40.842] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:24:40.842] data.LB_FadeInType0=100 [2025-09-24 10:24:40.842] data.CHLH_FadeInType0=0 [2025-09-24 10:24:40.842] data.WU_FadeInDelay=0 [2025-09-24 10:24:40.842] max_time_out=0 [2025-09-24 10:24:40.842] No splash screen [2025-09-24 10:24:40.842] stop dss Done [2025-09-24 10:24:40.842] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:24:40.842] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:24:40.910] /dev/mem opened. [2025-09-24 10:24:40.910] Memory mapped at address 0xffffae4db000. [2025-09-24 10:24:40.910] Read at address 0x00600018 (0xffffae4db018): 0x00000000 [2025-09-24 10:24:40.910] Write at address 0x00600018 (0xffffae4db018): 0x00400040, readback 0x00400040 [2025-09-24 10:24:40.910] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:24:40.926] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:24:40.990] Loaded PowerVR consumer services. [2025-09-24 10:24:41.155] 512+0 records in [2025-09-24 10:24:41.155] 512+0 records out [2025-09-24 10:24:41.155] Waiting data available... [2025-09-24 10:24:41.187] Starting syslogd/klogd: done [2025-09-24 10:24:41.203] DML Start [2025-09-24 10:24:41.363] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:24:41.586] DML res1: 0 [2025-09-24 10:24:42.096] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:24:42.096] Read Success [2025-09-24 10:24:42.096] Verifying certificate... [2025-09-24 10:24:42.320] Verified OK [2025-09-24 10:24:42.335] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:24:44.073] Verified OK [2025-09-24 10:24:44.073] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:24:44.648] Verified OK [2025-09-24 10:24:44.648] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:24:47.168] fs.protected_hardlinks = 1 [2025-09-24 10:24:47.168] fs.protected_symlinks = 1 [2025-09-24 10:24:47.168] kernel.modules_disabled = 1 [2025-09-24 10:24:47.359] [2025-09-24 10:24:47.359] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:24:48.706] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:24:56.438] SBL1:1210.0.1.0 [2025-09-24 10:24:56.486] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:24:58.052] SBL2:1210.0.1.0 [2025-09-24 10:24:58.084] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:24:58.196] j-A [2025-09-24 10:25:05.568] The R5 Autosar Classic is running [2025-09-24 10:25:05.568] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:25:05.568] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:25:06.176] INIT: version 2.96 booting [2025-09-24 10:25:06.287] INIT: Entering runlevel: 5 [2025-09-24 10:25:06.447] mtd24 attached [2025-09-24 10:25:06.463] mtd32 attached [2025-09-24 10:25:06.463] mtd28 attached [2025-09-24 10:25:06.495] ubi0:textures is mounted. [2025-09-24 10:25:06.588] ubi1:dml_code is mounted. [2025-09-24 10:25:06.588] RTNETLINK answers: File exists [2025-09-24 10:25:06.588] ubi2:animations is mounted. [2025-09-24 10:25:06.588] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:25:06.588] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:25:06.588] data.LB_FadeInType0=100 [2025-09-24 10:25:06.588] data.CHLH_FadeInType0=0 [2025-09-24 10:25:06.588] data.WU_FadeInDelay=0 [2025-09-24 10:25:06.588] max_time_out=0 [2025-09-24 10:25:06.588] No splash screen [2025-09-24 10:25:06.588] stop dss Done [2025-09-24 10:25:06.588] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:25:06.588] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:25:06.588] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:25:06.645] /dev/mem opened. [2025-09-24 10:25:06.645] Memory mapped at address 0xffffb84f9000. [2025-09-24 10:25:06.645] Read at address 0x00600018 (0xffffb84f9018): 0x00000000 [2025-09-24 10:25:06.645] Write at address 0x00600018 (0xffffb84f9018): 0x00400040, readback 0x00400040 [2025-09-24 10:25:06.661] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:25:06.677] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:25:06.837] Loaded PowerVR consumer services. [2025-09-24 10:25:06.869] 512+0 records in [2025-09-24 10:25:06.869] 512+0 records out [2025-09-24 10:25:06.933] Starting syslogd/klogd: done [2025-09-24 10:25:06.949] Waiting data available... [2025-09-24 10:25:06.949] DML Start [2025-09-24 10:25:07.141] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:25:07.381] DML res1: 0 [2025-09-24 10:25:07.859] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:25:07.859] Read Success [2025-09-24 10:25:07.859] Verifying certificate... [2025-09-24 10:25:08.115] Verified OK [2025-09-24 10:25:08.132] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:25:09.883] Verified OK [2025-09-24 10:25:09.883] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:25:10.391] Verified OK [2025-09-24 10:25:10.391] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:25:12.868] fs.protected_hardlinks = 1 [2025-09-24 10:25:12.868] fs.protected_symlinks = 1 [2025-09-24 10:25:12.868] kernel.modules_disabled = 1 [2025-09-24 10:25:13.044] [2025-09-24 10:25:13.044] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:25:14.430] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:25:22.146] SBL1:1210.0.1.0 [2025-09-24 10:25:22.177] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:25:23.760] SBL2:1210.0.1.0 [2025-09-24 10:25:23.791] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:25:23.904] j-A [2025-09-24 10:25:31.275] The R5 Autosar Classic is running [2025-09-24 10:25:31.275] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:25:31.275] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:25:31.882] INIT: version 2.96 booting [2025-09-24 10:25:31.979] INIT: Entering runlevel: 5 [2025-09-24 10:25:32.138] mtd24 attached [2025-09-24 10:25:32.154] mtd28 attached [2025-09-24 10:25:32.154] mtd32 attached [2025-09-24 10:25:32.202] RTNETLINK answers: File exists [2025-09-24 10:25:32.240] ubi0:textures is mounted. [2025-09-24 10:25:32.240] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:25:32.240] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:25:32.240] ubi2:dml_code is mounted. [2025-09-24 10:25:32.240] ubi1:animations is mounted. [2025-09-24 10:25:32.240] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:25:32.240] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:25:32.266] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:25:32.266] data.LB_FadeInType0=100 [2025-09-24 10:25:32.266] data.CHLH_FadeInType0=0 [2025-09-24 10:25:32.266] data.WU_FadeInDelay=0 [2025-09-24 10:25:32.266] max_time_out=0 [2025-09-24 10:25:32.266] No splash screen [2025-09-24 10:25:32.266] stop dss Done [2025-09-24 10:25:32.298] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:25:32.339] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:25:32.339] /dev/mem opened. [2025-09-24 10:25:32.339] Memory mapped at address 0xffffa1e7e000. [2025-09-24 10:25:32.339] Read at address 0x00600018 (0xffffa1e7e018): 0x00000000 [2025-09-24 10:25:32.339] Write at address 0x00600018 (0xffffa1e7e018): 0x00400040, readback 0x00400040 [2025-09-24 10:25:32.515] Loaded PowerVR consumer services. [2025-09-24 10:25:32.563] 512+0 records in [2025-09-24 10:25:32.563] 512+0 records out [2025-09-24 10:25:32.595] Waiting data available... [2025-09-24 10:25:32.595] Starting syslogd/klogd: done [2025-09-24 10:25:32.611] DML Start [2025-09-24 10:25:32.771] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:25:32.947] DML res1: 0 [2025-09-24 10:25:33.520] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:25:33.520] Read Success [2025-09-24 10:25:33.520] Verifying certificate... [2025-09-24 10:25:33.807] Verified OK [2025-09-24 10:25:33.839] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:25:35.608] Verified OK [2025-09-24 10:25:35.608] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:25:36.150] Verified OK [2025-09-24 10:25:36.150] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:25:38.612] fs.protected_hardlinks = 1 [2025-09-24 10:25:38.628] fs.protected_symlinks = 1 [2025-09-24 10:25:38.628] kernel.modules_disabled = 1 [2025-09-24 10:25:38.820] [2025-09-24 10:25:38.820] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:25:40.125] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:25:47.848] SBL1:1210.0.1.0 [2025-09-24 10:25:47.896] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:25:49.462] SBL2:1210.0.1.0 [2025-09-24 10:25:49.494] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:25:49.606] j-A [2025-09-24 10:25:56.978] The R5 Autosar Classic is running [2025-09-24 10:25:56.978] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:25:56.978] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:25:57.585] INIT: version 2.96 booting [2025-09-24 10:25:57.698] INIT: Entering runlevel: 5 [2025-09-24 10:25:57.841] mtd24 attached [2025-09-24 10:25:57.857] mtd28 attached [2025-09-24 10:25:57.916] ubi1:animations is mounted. [2025-09-24 10:25:57.916] mtd32 attached [2025-09-24 10:25:57.916] ubi0:textures is mounted. [2025-09-24 10:25:57.916] RTNETLINK answers: File exists [2025-09-24 10:25:57.984] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:25:57.984] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:25:57.984] ubi2:dml_code is mounted. [2025-09-24 10:25:57.984] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:25:57.984] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:25:57.984] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:25:57.984] data.LB_FadeInType0=100 [2025-09-24 10:25:57.984] data.CHLH_FadeInType0=0 [2025-09-24 10:25:57.984] data.WU_FadeInDelay=0 [2025-09-24 10:25:57.984] max_time_out=0 [2025-09-24 10:25:57.984] No splash screen [2025-09-24 10:25:57.984] stop dss Done [2025-09-24 10:25:58.032] /dev/mem opened. [2025-09-24 10:25:58.032] Memory mapped at address 0xffffabc26000. [2025-09-24 10:25:58.065] Read at address 0x00600018 (0xffffabc26018): 0x00000000 [2025-09-24 10:25:58.065] Write at address 0x00600018 (0xffffabc26018): 0x00400040, readback 0x00400040 [2025-09-24 10:25:58.065] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:25:58.065] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:25:58.257] Loaded PowerVR consumer services. [2025-09-24 10:25:58.272] 512+0 records in [2025-09-24 10:25:58.272] 512+0 records out [2025-09-24 10:25:58.304] Starting syslogd/klogd: done [2025-09-24 10:25:58.336] Waiting data available... [2025-09-24 10:25:58.336] DML Start [2025-09-24 10:25:58.528] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:25:58.736] DML res1: 0 [2025-09-24 10:25:59.199] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:25:59.220] Read Success [2025-09-24 10:25:59.220] Verifying certificate... [2025-09-24 10:25:59.461] Verified OK [2025-09-24 10:25:59.477] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:26:01.139] Verified OK [2025-09-24 10:26:01.139] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:26:01.779] Verified OK [2025-09-24 10:26:01.779] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:26:04.496] fs.protected_hardlinks = 1 [2025-09-24 10:26:04.512] fs.protected_symlinks = 1 [2025-09-24 10:26:04.512] kernel.modules_disabled = 1 [2025-09-24 10:26:04.705] [2025-09-24 10:26:04.705] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:26:05.865] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:26:13.553] SBL1:1210.0.1.0 [2025-09-24 10:26:13.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:26:15.167] SBL2:1210.0.1.0 [2025-09-24 10:26:15.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:26:15.295] j-A [2025-09-24 10:26:22.650] The R5 Autosar Classic is running [2025-09-24 10:26:22.675] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:26:22.675] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:26:23.282] INIT: version 2.96 booting [2025-09-24 10:26:23.395] INIT: Entering runlevel: 5 [2025-09-24 10:26:23.555] mtd24 attached [2025-09-24 10:26:23.570] mtd28 attached [2025-09-24 10:26:23.586] mtd32 attached [2025-09-24 10:26:23.618] ubi0:textures is mounted. [2025-09-24 10:26:23.685] ubi1:animations is mounted. [2025-09-24 10:26:23.685] RTNETLINK answers: File exists [2025-09-24 10:26:23.685] ubi2:dml_code is mounted. [2025-09-24 10:26:23.685] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:26:23.685] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:26:23.685] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:26:23.685] data.LB_FadeInType0=100 [2025-09-24 10:26:23.685] data.CHLH_FadeInType0=0 [2025-09-24 10:26:23.685] data.WU_FadeInDelay=0 [2025-09-24 10:26:23.685] max_time_out=0 [2025-09-24 10:26:23.685] No splash screen [2025-09-24 10:26:23.685] stop dss Done [2025-09-24 10:26:23.685] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:26:23.685] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:26:23.773] /dev/mem opened. [2025-09-24 10:26:23.773] Memory mapped at address 0xffff9d5b6000. [2025-09-24 10:26:23.773] Read at address 0x00600018 (0xffff9d5b6018): 0x00000000 [2025-09-24 10:26:23.773] Write at address 0x00600018 (0xffff9d5b6018): 0x00400040, readback 0x00400040 [2025-09-24 10:26:23.773] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:26:23.773] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:26:23.853] Loaded PowerVR consumer services. [2025-09-24 10:26:23.981] 512+0 records in [2025-09-24 10:26:23.981] 512+0 records out [2025-09-24 10:26:23.997] Waiting data available... [2025-09-24 10:26:23.997] Starting syslogd/klogd: done [2025-09-24 10:26:24.029] DML Start [2025-09-24 10:26:24.205] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:26:24.397] DML res1: 0 [2025-09-24 10:26:24.888] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:26:24.888] Read Success [2025-09-24 10:26:24.888] Verifying certificate... [2025-09-24 10:26:25.127] Verified OK [2025-09-24 10:26:25.143] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:26:26.847] Verified OK [2025-09-24 10:26:26.847] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:26:27.462] Verified OK [2025-09-24 10:26:27.462] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:26:30.069] fs.protected_hardlinks = 1 [2025-09-24 10:26:30.069] fs.protected_symlinks = 1 [2025-09-24 10:26:30.084] kernel.modules_disabled = 1 [2025-09-24 10:26:30.276] [2025-09-24 10:26:30.276] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:26:31.507] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:26:39.244] SBL1:1210.0.1.0 [2025-09-24 10:26:39.292] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:26:40.858] SBL2:1210.0.1.0 [2025-09-24 10:26:40.906] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:26:41.003] j-A [2025-09-24 10:26:48.357] The R5 Autosar Classic is running [2025-09-24 10:26:48.357] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:26:48.378] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:26:48.985] INIT: version 2.96 booting [2025-09-24 10:26:49.097] INIT: Entering runlevel: 5 [2025-09-24 10:26:49.258] mtd24 attached [2025-09-24 10:26:49.258] mtd32 attached [2025-09-24 10:26:49.274] mtd28 attached [2025-09-24 10:26:49.290] ubi0:textures is mounted. [2025-09-24 10:26:49.321] RTNETLINK answers: File exists [2025-09-24 10:26:49.379] ubi1:dml_code is mounted. [2025-09-24 10:26:49.379] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:26:49.379] ubi2:animations is mounted. [2025-09-24 10:26:49.379] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:26:49.379] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:26:49.379] data.LB_FadeInType0=100 [2025-09-24 10:26:49.379] data.CHLH_FadeInType0=0 [2025-09-24 10:26:49.379] data.WU_FadeInDelay=0 [2025-09-24 10:26:49.379] max_time_out=0 [2025-09-24 10:26:49.379] No splash screen [2025-09-24 10:26:49.379] stop dss Done [2025-09-24 10:26:49.379] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:26:49.379] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:26:49.452] /dev/mem opened. [2025-09-24 10:26:49.452] Memory mapped at address 0xffff97865000. [2025-09-24 10:26:49.452] Read at address 0x00600018 (0xffff97865018): 0x00000000 [2025-09-24 10:26:49.452] Write at address 0x00600018 (0xffff97865018): 0x00400040, readback 0x00400040 [2025-09-24 10:26:49.484] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:26:49.500] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:26:49.644] Loaded PowerVR consumer services. [2025-09-24 10:26:49.676] 512+0 records in [2025-09-24 10:26:49.676] 512+0 records out [2025-09-24 10:26:49.723] Starting syslogd/klogd: done [2025-09-24 10:26:49.739] Waiting data available... [2025-09-24 10:26:49.739] DML Start [2025-09-24 10:26:49.931] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:26:50.139] DML res1: 0 [2025-09-24 10:26:50.567] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:26:50.567] Read Success [2025-09-24 10:26:50.567] Verifying certificate... [2025-09-24 10:26:50.838] Verified OK [2025-09-24 10:26:50.854] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:26:52.497] Verified OK [2025-09-24 10:26:52.497] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:26:53.136] Verified OK [2025-09-24 10:26:53.136] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:26:55.710] fs.protected_hardlinks = 1 [2025-09-24 10:26:55.726] fs.protected_symlinks = 1 [2025-09-24 10:26:55.726] kernel.modules_disabled = 1 [2025-09-24 10:26:55.918] [2025-09-24 10:26:55.918] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:26:57.258] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:27:04.950] SBL1:1210.0.1.0 [2025-09-24 10:27:04.998] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:27:06.565] SBL2:1210.0.1.0 [2025-09-24 10:27:06.597] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:27:06.709] j-A [2025-09-24 10:27:14.085] The R5 Autosar Classic is running [2025-09-24 10:27:14.085] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:27:14.085] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:27:14.692] INIT: version 2.96 booting [2025-09-24 10:27:14.804] INIT: Entering runlevel: 5 [2025-09-24 10:27:14.948] mtd24 attached [2025-09-24 10:27:14.964] mtd32 attached [2025-09-24 10:27:14.980] mtd28 attached [2025-09-24 10:27:14.996] ubi0:textures is mounted. [2025-09-24 10:27:15.028] RTNETLINK answers: File exists [2025-09-24 10:27:15.028] ubi1:dml_code is mounted. [2025-09-24 10:27:15.082] ubi2:animations is mounted. [2025-09-24 10:27:15.082] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:27:15.082] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:27:15.082] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:27:15.082] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:27:15.082] data.LB_FadeInType0=100 [2025-09-24 10:27:15.082] data.CHLH_FadeInType0=0 [2025-09-24 10:27:15.082] data.WU_FadeInDelay=0 [2025-09-24 10:27:15.082] max_time_out=0 [2025-09-24 10:27:15.082] No splash screen [2025-09-24 10:27:15.082] stop dss Done [2025-09-24 10:27:15.082] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:27:15.156] /dev/mem opened. [2025-09-24 10:27:15.156] Memory mapped at address 0xffffa1529000. [2025-09-24 10:27:15.156] Read at address 0x00600018 (0xffffa1529018): 0x00000000 [2025-09-24 10:27:15.156] Write at address 0x00600018 (0xffffa1529018): 0x00400040, readback 0x00400040 [2025-09-24 10:27:15.156] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:27:15.156] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:27:15.365] Loaded PowerVR consumer services. [2025-09-24 10:27:15.381] Waiting data available... [2025-09-24 10:27:15.397] 512+0 records in [2025-09-24 10:27:15.397] 512+0 records out [2025-09-24 10:27:15.445] Starting syslogd/klogd: done [2025-09-24 10:27:15.461] DML Start [2025-09-24 10:27:15.620] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:27:15.828] DML res1: 0 [2025-09-24 10:27:16.340] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:27:16.356] Read Success [2025-09-24 10:27:16.356] Verifying certificate... [2025-09-24 10:27:16.628] Verified OK [2025-09-24 10:27:16.643] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:27:18.160] Verified OK [2025-09-24 10:27:18.160] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:27:18.709] Verified OK [2025-09-24 10:27:18.709] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:27:21.491] fs.protected_hardlinks = 1 [2025-09-24 10:27:21.507] fs.protected_symlinks = 1 [2025-09-24 10:27:21.507] kernel.modules_disabled = 1 [2025-09-24 10:27:21.700] [2025-09-24 10:27:21.700] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:27:23.008] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:27:30.671] SBL1:1210.0.1.0 [2025-09-24 10:27:30.702] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:27:32.285] SBL2:1210.0.1.0 [2025-09-24 10:27:32.316] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:27:32.429] j-A [2025-09-24 10:27:39.800] The R5 Autosar Classic is running [2025-09-24 10:27:39.800] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:27:39.800] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:27:40.407] INIT: version 2.96 booting [2025-09-24 10:27:40.518] INIT: Entering runlevel: 5 [2025-09-24 10:27:40.678] mtd32 attached [2025-09-24 10:27:40.694] mtd28 attached [2025-09-24 10:27:40.694] mtd24 attached [2025-09-24 10:27:40.726] ubi0:dml_code is mounted. [2025-09-24 10:27:40.809] ubi2:textures is mounted. [2025-09-24 10:27:40.809] RTNETLINK answers: File exists [2025-09-24 10:27:40.809] ubi1:animations is mounted. [2025-09-24 10:27:40.809] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:27:40.809] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:27:40.809] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:27:40.809] data.LB_FadeInType0=100 [2025-09-24 10:27:40.809] data.CHLH_FadeInType0=0 [2025-09-24 10:27:40.809] data.WU_FadeInDelay=0 [2025-09-24 10:27:40.809] max_time_out=0 [2025-09-24 10:27:40.809] No splash screen [2025-09-24 10:27:40.809] stop dss Done [2025-09-24 10:27:40.809] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:27:40.809] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:27:40.841] /dev/mem opened. [2025-09-24 10:27:40.878] Memory mapped at address 0xffffa3007000. [2025-09-24 10:27:40.878] Read at address 0x00600018 (0xffffa3007018): 0x00000000 [2025-09-24 10:27:40.878] Write at address 0x00600018 (0xffffa3007018): 0x00400040, readback 0x00400040 [2025-09-24 10:27:40.878] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:27:40.878] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:27:41.070] Loaded PowerVR consumer services. [2025-09-24 10:27:41.102] 512+0 records in [2025-09-24 10:27:41.102] 512+0 records out [2025-09-24 10:27:41.118] Waiting data available... [2025-09-24 10:27:41.149] Starting syslogd/klogd: done [2025-09-24 10:27:41.165] DML Start [2025-09-24 10:27:41.326] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:27:41.518] DML res1: 0 [2025-09-24 10:27:42.007] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:27:42.007] Read Success [2025-09-24 10:27:42.007] Verifying certificate... [2025-09-24 10:27:42.279] Verified OK [2025-09-24 10:27:42.295] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:27:43.908] Verified OK [2025-09-24 10:27:43.908] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:27:44.474] Verified OK [2025-09-24 10:27:44.474] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:27:47.256] fs.protected_hardlinks = 1 [2025-09-24 10:27:47.256] fs.protected_symlinks = 1 [2025-09-24 10:27:47.272] kernel.modules_disabled = 1 [2025-09-24 10:27:47.463] [2025-09-24 10:27:47.463] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:27:48.673] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:27:56.397] SBL1:1210.0.1.0 [2025-09-24 10:27:56.429] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:27:58.012] SBL2:1210.0.1.0 [2025-09-24 10:27:58.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:27:58.140] j-A [2025-09-24 10:28:05.494] The R5 Autosar Classic is running [2025-09-24 10:28:05.517] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:28:05.517] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:28:06.125] INIT: version 2.96 booting [2025-09-24 10:28:06.237] INIT: Entering runlevel: 5 [2025-09-24 10:28:06.397] mtd32 attached [2025-09-24 10:28:06.397] mtd28 attached [2025-09-24 10:28:06.414] mtd24 attached [2025-09-24 10:28:06.461] RTNETLINK answers: File exists [2025-09-24 10:28:06.461] ubi0:dml_code is mounted. [2025-09-24 10:28:06.493] ubi1:animations is mounted. [2025-09-24 10:28:06.493] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:28:06.493] ubi2:textures is mounted. [2025-09-24 10:28:06.493] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:28:06.493] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:28:06.493] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:28:06.526] data.LB_FadeInType0=100 [2025-09-24 10:28:06.526] data.CHLH_FadeInType0=0 [2025-09-24 10:28:06.526] data.WU_FadeInDelay=0 [2025-09-24 10:28:06.526] max_time_out=0 [2025-09-24 10:28:06.526] No splash screen [2025-09-24 10:28:06.526] stop dss Done [2025-09-24 10:28:06.526] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:28:06.565] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:28:06.565] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:28:06.565] /dev/mem opened. [2025-09-24 10:28:06.565] Memory mapped at address 0xffffa9287000. [2025-09-24 10:28:06.591] Read at address 0x00600018 (0xffffa9287018): 0x00000000 [2025-09-24 10:28:06.591] Write at address 0x00600018 (0xffffa9287018): 0x00400040, readback 0x00400040 [2025-09-24 10:28:06.687] Loaded PowerVR consumer services. [2025-09-24 10:28:06.815] 512+0 records in [2025-09-24 10:28:06.836] 512+0 records out [2025-09-24 10:28:06.836] Waiting data available... [2025-09-24 10:28:06.868] Starting syslogd/klogd: done [2025-09-24 10:28:06.884] DML Start [2025-09-24 10:28:07.027] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:28:07.268] DML res1: 0 [2025-09-24 10:28:07.743] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:28:07.743] Read Success [2025-09-24 10:28:07.743] Verifying certificate... [2025-09-24 10:28:07.982] Verified OK [2025-09-24 10:28:08.014] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:28:09.661] Verified OK [2025-09-24 10:28:09.661] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:28:10.221] Verified OK [2025-09-24 10:28:10.236] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:28:12.827] fs.protected_hardlinks = 1 [2025-09-24 10:28:12.843] fs.protected_symlinks = 1 [2025-09-24 10:28:12.843] kernel.modules_disabled = 1 [2025-09-24 10:28:13.051] [2025-09-24 10:28:13.051] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:28:14.394] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:28:22.106] SBL1:1210.0.1.0 [2025-09-24 10:28:22.138] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:28:23.722] SBL2:1210.0.1.0 [2025-09-24 10:28:23.753] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:28:23.865] j-A [2025-09-24 10:28:31.203] The R5 Autosar Classic is running [2025-09-24 10:28:31.228] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:28:31.228] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:28:31.836] INIT: version 2.96 booting [2025-09-24 10:28:31.947] INIT: Entering runlevel: 5 [2025-09-24 10:28:32.091] mtd24 attached [2025-09-24 10:28:32.107] mtd28 attached [2025-09-24 10:28:32.123] mtd32 attached [2025-09-24 10:28:32.139] ubi0:textures is mounted. [2025-09-24 10:28:32.171] RTNETLINK answers: File exists [2025-09-24 10:28:32.223] ubi2:dml_code is mounted. [2025-09-24 10:28:32.223] ubi1:animations is mounted. [2025-09-24 10:28:32.223] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:28:32.223] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:28:32.223] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:28:32.224] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:28:32.224] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:28:32.224] data.LB_FadeInType0=100 [2025-09-24 10:28:32.224] data.CHLH_FadeInType0=0 [2025-09-24 10:28:32.224] data.WU_FadeInDelay=0 [2025-09-24 10:28:32.224] max_time_out=0 [2025-09-24 10:28:32.224] No splash screen [2025-09-24 10:28:32.224] stop dss Done [2025-09-24 10:28:32.255] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:28:32.295] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:28:32.295] /dev/mem opened. [2025-09-24 10:28:32.295] Memory mapped at address 0xffff9f4c5000. [2025-09-24 10:28:32.295] Read at address 0x00600018 (0xffff9f4c5018): 0x00000000 [2025-09-24 10:28:32.295] Write at address 0x00600018 (0xffff9f4c5018): 0x00400040, readback 0x00400040 [2025-09-24 10:28:32.391] Loaded PowerVR consumer services. [2025-09-24 10:28:32.519] 512+0 records in [2025-09-24 10:28:32.519] 512+0 records out [2025-09-24 10:28:32.535] Waiting data available... [2025-09-24 10:28:32.567] Starting syslogd/klogd: done [2025-09-24 10:28:32.583] DML Start [2025-09-24 10:28:32.759] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:28:32.999] DML res1: 0 [2025-09-24 10:28:33.446] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:28:33.462] Read Success [2025-09-24 10:28:33.462] Verifying certificate... [2025-09-24 10:28:33.734] Verified OK [2025-09-24 10:28:33.750] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:28:35.332] Verified OK [2025-09-24 10:28:35.332] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:28:35.892] Verified OK [2025-09-24 10:28:35.908] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:28:38.578] fs.protected_hardlinks = 1 [2025-09-24 10:28:38.594] fs.protected_symlinks = 1 [2025-09-24 10:28:38.610] kernel.modules_disabled = 1 [2025-09-24 10:28:38.802] [2025-09-24 10:28:38.802] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:28:40.127] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:28:47.796] SBL1:1210.0.1.0 [2025-09-24 10:28:47.844] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:28:49.411] SBL2:1210.0.1.0 [2025-09-24 10:28:49.459] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:28:49.555] j-A [2025-09-24 10:28:56.908] The R5 Autosar Classic is running [2025-09-24 10:28:56.930] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:28:56.930] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:28:57.538] INIT: version 2.96 booting [2025-09-24 10:28:57.650] INIT: Entering runlevel: 5 [2025-09-24 10:28:57.810] mtd28 attached [2025-09-24 10:28:57.826] mtd24 attached [2025-09-24 10:28:57.842] mtd32 attached [2025-09-24 10:28:57.874] ubi0:animations is mounted. [2025-09-24 10:28:57.890] RTNETLINK answers: File exists [2025-09-24 10:28:57.890] ubi1:textures is mounted. [2025-09-24 10:28:57.945] ubi2:dml_code is mounted. [2025-09-24 10:28:57.945] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:28:57.945] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:28:57.945] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:28:57.945] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:28:57.945] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:28:57.945] data.LB_FadeInType0=100 [2025-09-24 10:28:57.945] data.CHLH_FadeInType0=0 [2025-09-24 10:28:57.945] data.WU_FadeInDelay=0 [2025-09-24 10:28:57.945] max_time_out=0 [2025-09-24 10:28:57.945] No splash screen [2025-09-24 10:28:57.945] stop dss Done [2025-09-24 10:28:57.992] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:28:58.029] /dev/mem opened. [2025-09-24 10:28:58.029] Memory mapped at address 0xffffb1710000. [2025-09-24 10:28:58.029] Read at address 0x00600018 (0xffffb1710018): 0x00000000 [2025-09-24 10:28:58.029] Write at address 0x00600018 (0xffffb1710018): 0x00400040, readback 0x00400040 [2025-09-24 10:28:58.029] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:28:58.142] Loaded PowerVR consumer services. [2025-09-24 10:28:58.238] 512+0 records in [2025-09-24 10:28:58.238] 512+0 records out [2025-09-24 10:28:58.269] Waiting data available... [2025-09-24 10:28:58.285] Starting syslogd/klogd: done [2025-09-24 10:28:58.301] DML Start [2025-09-24 10:28:58.494] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:28:58.717] DML res1: 0 [2025-09-24 10:28:59.133] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:28:59.154] Read Success [2025-09-24 10:28:59.154] Verifying certificate... [2025-09-24 10:28:59.377] Verified OK [2025-09-24 10:28:59.393] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:29:00.992] Verified OK [2025-09-24 10:29:00.992] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:29:01.691] Verified OK [2025-09-24 10:29:01.691] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:29:04.282] fs.protected_hardlinks = 1 [2025-09-24 10:29:04.297] fs.protected_symlinks = 1 [2025-09-24 10:29:04.297] kernel.modules_disabled = 1 [2025-09-24 10:29:04.490] [2025-09-24 10:29:04.490] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:29:05.810] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:29:13.523] SBL1:1210.0.1.0 [2025-09-24 10:29:13.555] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:29:15.138] SBL2:1210.0.1.0 [2025-09-24 10:29:15.170] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:29:15.282] j-A [2025-09-24 10:29:22.653] The R5 Autosar Classic is running [2025-09-24 10:29:22.653] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:29:22.653] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:29:23.260] INIT: version 2.96 booting [2025-09-24 10:29:23.372] INIT: Entering runlevel: 5 [2025-09-24 10:29:23.516] mtd24 attached [2025-09-24 10:29:23.532] mtd28 attached [2025-09-24 10:29:23.548] mtd32 attached [2025-09-24 10:29:23.580] ubi0:textures is mounted. [2025-09-24 10:29:23.595] RTNETLINK answers: File exists [2025-09-24 10:29:23.595] ubi1:animations is mounted. [2025-09-24 10:29:23.632] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:29:23.632] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:29:23.632] ubi2:dml_code is mounted. [2025-09-24 10:29:23.632] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:29:23.632] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:29:23.632] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:29:23.655] data.LB_FadeInType0=100 [2025-09-24 10:29:23.655] data.CHLH_FadeInType0=0 [2025-09-24 10:29:23.655] data.WU_FadeInDelay=0 [2025-09-24 10:29:23.655] max_time_out=0 [2025-09-24 10:29:23.655] No splash screen [2025-09-24 10:29:23.655] stop dss Done [2025-09-24 10:29:23.681] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:29:23.681] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:29:23.697] /dev/mem opened. [2025-09-24 10:29:23.697] Memory mapped at address 0xffffb31d4000. [2025-09-24 10:29:23.723] Read at address 0x00600018 (0xffffb31d4018): 0x00000000 [2025-09-24 10:29:23.723] Write at address 0x00600018 (0xffffb31d4018): 0x00400040, readback 0x00400040 [2025-09-24 10:29:23.915] Loaded PowerVR consumer services. [2025-09-24 10:29:23.947] 512+0 records in [2025-09-24 10:29:23.947] 512+0 records out [2025-09-24 10:29:23.979] Waiting data available... [2025-09-24 10:29:23.995] Starting syslogd/klogd: done [2025-09-24 10:29:24.011] DML Start [2025-09-24 10:29:24.203] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:29:24.427] DML res1: 0 [2025-09-24 10:29:24.874] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:29:24.891] Read Success [2025-09-24 10:29:24.891] Verifying certificate... [2025-09-24 10:29:25.130] Verified OK [2025-09-24 10:29:25.146] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:29:26.840] Verified OK [2025-09-24 10:29:26.840] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:29:27.445] Verified OK [2025-09-24 10:29:27.445] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:29:30.035] fs.protected_hardlinks = 1 [2025-09-24 10:29:30.035] fs.protected_symlinks = 1 [2025-09-24 10:29:30.051] kernel.modules_disabled = 1 [2025-09-24 10:29:30.243] [2025-09-24 10:29:30.243] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:29:31.513] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:29:39.216] SBL1:1210.0.1.0 [2025-09-24 10:29:39.263] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:29:40.830] SBL2:1210.0.1.0 [2025-09-24 10:29:40.862] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:29:40.974] j-A [2025-09-24 10:29:48.347] The R5 Autosar Classic is running [2025-09-24 10:29:48.347] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:29:48.347] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:29:48.955] INIT: version 2.96 booting [2025-09-24 10:29:49.066] INIT: Entering runlevel: 5 [2025-09-24 10:29:49.210] mtd32 attached [2025-09-24 10:29:49.226] mtd24 attached [2025-09-24 10:29:49.242] mtd28 attached [2025-09-24 10:29:49.290] RTNETLINK answers: File exists [2025-09-24 10:29:49.290] ubi0:dml_code is mounted. [2025-09-24 10:29:49.290] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:29:49.344] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:29:49.344] ubi1:textures is mounted. [2025-09-24 10:29:49.344] ubi2:animations is mounted. [2025-09-24 10:29:49.344] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:29:49.344] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:29:49.344] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:29:49.344] data.LB_FadeInType0=100 [2025-09-24 10:29:49.344] data.CHLH_FadeInType0=0 [2025-09-24 10:29:49.344] data.WU_FadeInDelay=0 [2025-09-24 10:29:49.344] max_time_out=0 [2025-09-24 10:29:49.344] No splash screen [2025-09-24 10:29:49.344] stop dss Done [2025-09-24 10:29:49.376] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:29:49.419] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:29:49.419] /dev/mem opened. [2025-09-24 10:29:49.419] Memory mapped at address 0xffff9affe000. [2025-09-24 10:29:49.419] Read at address 0x00600018 (0xffff9affe018): 0x00000000 [2025-09-24 10:29:49.419] Write at address 0x00600018 (0xffff9affe018): 0x00400040, readback 0x00400040 [2025-09-24 10:29:49.627] Loaded PowerVR consumer services. [2025-09-24 10:29:49.674] Waiting data available... [2025-09-24 10:29:49.674] 512+0 records in [2025-09-24 10:29:49.674] 512+0 records out [2025-09-24 10:29:49.706] Starting syslogd/klogd: done [2025-09-24 10:29:49.722] DML Start [2025-09-24 10:29:49.914] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:29:50.122] DML res1: 0 [2025-09-24 10:29:50.554] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:29:50.570] Read Success [2025-09-24 10:29:50.570] Verifying certificate... [2025-09-24 10:29:50.858] Verified OK [2025-09-24 10:29:50.874] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:29:52.702] Verified OK [2025-09-24 10:29:52.702] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:29:53.193] Verified OK [2025-09-24 10:29:53.193] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:29:55.511] fs.protected_hardlinks = 1 [2025-09-24 10:29:55.527] fs.protected_symlinks = 1 [2025-09-24 10:29:55.543] kernel.modules_disabled = 1 [2025-09-24 10:29:55.751] [2025-09-24 10:29:55.751] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:29:57.218] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:30:04.916] SBL1:1210.0.1.0 [2025-09-24 10:30:04.964] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:30:06.530] SBL2:1210.0.1.0 [2025-09-24 10:30:06.563] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:30:06.675] j-A [2025-09-24 10:30:14.048] The R5 Autosar Classic is running [2025-09-24 10:30:14.048] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:30:14.048] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:30:14.656] INIT: version 2.96 booting [2025-09-24 10:30:14.751] INIT: Entering runlevel: 5 [2025-09-24 10:30:14.912] mtd28 attached [2025-09-24 10:30:14.928] mtd24 attached [2025-09-24 10:30:14.944] mtd32 attached [2025-09-24 10:30:14.960] ubi0:animations is mounted. [2025-09-24 10:30:14.992] ubi1:textures is mounted. [2025-09-24 10:30:14.992] RTNETLINK answers: File exists [2025-09-24 10:30:15.047] ubi2:dml_code is mounted. [2025-09-24 10:30:15.047] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:30:15.047] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:30:15.047] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:30:15.047] data.LB_FadeInType0=100 [2025-09-24 10:30:15.047] data.CHLH_FadeInType0=0 [2025-09-24 10:30:15.047] data.WU_FadeInDelay=0 [2025-09-24 10:30:15.047] max_time_out=0 [2025-09-24 10:30:15.047] No splash screen [2025-09-24 10:30:15.047] stop dss Done [2025-09-24 10:30:15.047] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:30:15.047] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:30:15.112] /dev/mem opened. [2025-09-24 10:30:15.112] Memory mapped at address 0xffffb374f000. [2025-09-24 10:30:15.112] Read at address 0x00600018 (0xffffb374f018): 0x00000000 [2025-09-24 10:30:15.112] Write at address 0x00600018 (0xffffb374f018): 0x00400040, readback 0x00400040 [2025-09-24 10:30:15.160] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:30:15.176] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:30:15.304] Loaded PowerVR consumer services. [2025-09-24 10:30:15.320] 512+0 records in [2025-09-24 10:30:15.320] 512+0 records out [2025-09-24 10:30:15.384] Starting syslogd/klogd: done [2025-09-24 10:30:15.416] Waiting data available... [2025-09-24 10:30:15.432] DML Start [2025-09-24 10:30:15.624] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:30:15.848] DML res1: 0 [2025-09-24 10:30:16.295] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:30:16.295] Read Success [2025-09-24 10:30:16.311] Verifying certificate... [2025-09-24 10:30:16.551] Verified OK [2025-09-24 10:30:16.567] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:30:18.147] Verified OK [2025-09-24 10:30:18.147] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:30:18.818] Verified OK [2025-09-24 10:30:18.818] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:30:21.521] fs.protected_hardlinks = 1 [2025-09-24 10:30:21.537] fs.protected_symlinks = 1 [2025-09-24 10:30:21.537] kernel.modules_disabled = 1 [2025-09-24 10:30:21.744] [2025-09-24 10:30:21.744] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:30:22.905] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:30:30.634] SBL1:1210.0.1.0 [2025-09-24 10:30:30.666] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:30:32.250] SBL2:1210.0.1.0 [2025-09-24 10:30:32.282] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:30:32.393] j-A [2025-09-24 10:30:39.764] The R5 Autosar Classic is running [2025-09-24 10:30:39.764] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:30:39.764] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:30:40.372] INIT: version 2.96 booting [2025-09-24 10:30:40.483] INIT: Entering runlevel: 5 [2025-09-24 10:30:40.644] mtd24 attached [2025-09-24 10:30:40.644] mtd28 attached [2025-09-24 10:30:40.675] mtd32 attached [2025-09-24 10:30:40.707] ubi0:textures is mounted. [2025-09-24 10:30:40.707] ubi1:animations is mounted. [2025-09-24 10:30:40.723] ubi2:dml_code is mounted. [2025-09-24 10:30:40.723] RTNETLINK answers: File exists [2025-09-24 10:30:40.778] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:30:40.778] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:30:40.778] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:30:40.778] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:30:40.778] data.LB_FadeInType0=100 [2025-09-24 10:30:40.778] data.CHLH_FadeInType0=0 [2025-09-24 10:30:40.778] data.WU_FadeInDelay=0 [2025-09-24 10:30:40.778] max_time_out=0 [2025-09-24 10:30:40.778] No splash screen [2025-09-24 10:30:40.778] stop dss Done [2025-09-24 10:30:40.778] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:30:40.842] /dev/mem opened. [2025-09-24 10:30:40.842] Memory mapped at address 0xffff93410000. [2025-09-24 10:30:40.842] Read at address 0x00600018 (0xffff93410018): 0x00000000 [2025-09-24 10:30:40.842] Write at address 0x00600018 (0xffff93410018): 0x00400040, readback 0x00400040 [2025-09-24 10:30:40.842] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:30:40.858] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:30:41.003] Loaded PowerVR consumer services. [2025-09-24 10:30:41.082] Waiting data available... [2025-09-24 10:30:41.082] 512+0 records in [2025-09-24 10:30:41.082] 512+0 records out [2025-09-24 10:30:41.130] Starting syslogd/klogd: done [2025-09-24 10:30:41.146] DML Start [2025-09-24 10:30:41.322] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:30:41.529] DML res1: 0 [2025-09-24 10:30:42.023] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:30:42.023] Read Success [2025-09-24 10:30:42.023] Verifying certificate... [2025-09-24 10:30:42.263] Verified OK [2025-09-24 10:30:42.279] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:30:43.997] Verified OK [2025-09-24 10:30:43.997] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:30:44.675] Verified OK [2025-09-24 10:30:44.675] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:30:47.374] fs.protected_hardlinks = 1 [2025-09-24 10:30:47.374] fs.protected_symlinks = 1 [2025-09-24 10:30:47.374] kernel.modules_disabled = 1 [2025-09-24 10:30:47.567] [2025-09-24 10:30:47.567] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:30:48.717] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:30:56.331] SBL1:1210.0.1.0 [2025-09-24 10:30:56.363] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:30:57.946] SBL2:1210.0.1.0 [2025-09-24 10:30:57.977] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:30:58.073] j-A [2025-09-24 10:31:05.430] The R5 Autosar Classic is running [2025-09-24 10:31:05.452] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:31:05.452] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:31:06.061] INIT: version 2.96 booting [2025-09-24 10:31:06.172] INIT: Entering runlevel: 5 [2025-09-24 10:31:06.316] mtd24 attached [2025-09-24 10:31:06.332] mtd28 attached [2025-09-24 10:31:06.348] mtd32 attached [2025-09-24 10:31:06.380] ubi0:textures is mounted. [2025-09-24 10:31:06.396] RTNETLINK answers: File exists [2025-09-24 10:31:06.396] ubi1:animations is mounted. [2025-09-24 10:31:06.451] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:31:06.451] ubi2:dml_code is mounted. [2025-09-24 10:31:06.451] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:31:06.451] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:31:06.451] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:31:06.451] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:31:06.451] data.LB_FadeInType0=100 [2025-09-24 10:31:06.451] data.CHLH_FadeInType0=0 [2025-09-24 10:31:06.451] data.WU_FadeInDelay=0 [2025-09-24 10:31:06.451] max_time_out=0 [2025-09-24 10:31:06.451] No splash screen [2025-09-24 10:31:06.451] stop dss Done [2025-09-24 10:31:06.482] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:31:06.498] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:31:06.532] /dev/mem opened. [2025-09-24 10:31:06.532] Memory mapped at address 0xffff81fab000. [2025-09-24 10:31:06.532] Read at address 0x00600018 (0xffff81fab018): 0x00000000 [2025-09-24 10:31:06.532] Write at address 0x00600018 (0xffff81fab018): 0x00400040, readback 0x00400040 [2025-09-24 10:31:06.597] Loaded PowerVR consumer services. [2025-09-24 10:31:06.740] 512+0 records in [2025-09-24 10:31:06.740] 512+0 records out [2025-09-24 10:31:06.756] Waiting data available... [2025-09-24 10:31:06.804] Starting syslogd/klogd: done [2025-09-24 10:31:06.821] DML Start [2025-09-24 10:31:07.012] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:31:07.236] DML res1: 0 [2025-09-24 10:31:07.684] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:31:07.700] Read Success [2025-09-24 10:31:07.700] Verifying certificate... [2025-09-24 10:31:07.956] Verified OK [2025-09-24 10:31:07.972] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:31:09.715] Verified OK [2025-09-24 10:31:09.715] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:31:10.290] Verified OK [2025-09-24 10:31:10.290] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:31:12.784] fs.protected_hardlinks = 1 [2025-09-24 10:31:12.784] fs.protected_symlinks = 1 [2025-09-24 10:31:12.800] kernel.modules_disabled = 1 [2025-09-24 10:31:12.992] [2025-09-24 10:31:12.992] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:31:14.329] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:31:22.032] SBL1:1210.0.1.0 [2025-09-24 10:31:22.064] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:31:23.647] SBL2:1210.0.1.0 [2025-09-24 10:31:23.679] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:31:23.776] j-A [2025-09-24 10:31:31.131] The R5 Autosar Classic is running [2025-09-24 10:31:31.155] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:31:31.155] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:31:31.763] INIT: version 2.96 booting [2025-09-24 10:31:31.874] INIT: Entering runlevel: 5 [2025-09-24 10:31:32.035] mtd24 attached [2025-09-24 10:31:32.035] mtd32 attached [2025-09-24 10:31:32.051] mtd28 attached [2025-09-24 10:31:32.083] ubi0:textures is mounted. [2025-09-24 10:31:32.161] RTNETLINK answers: File exists [2025-09-24 10:31:32.161] ubi2:animations is mounted. [2025-09-24 10:31:32.161] ubi1:dml_code is mounted. [2025-09-24 10:31:32.161] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:31:32.161] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:31:32.161] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:31:32.161] data.LB_FadeInType0=100 [2025-09-24 10:31:32.161] data.CHLH_FadeInType0=0 [2025-09-24 10:31:32.161] data.WU_FadeInDelay=0 [2025-09-24 10:31:32.161] max_time_out=0 [2025-09-24 10:31:32.161] No splash screen [2025-09-24 10:31:32.161] stop dss Done [2025-09-24 10:31:32.161] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:31:32.161] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:31:32.226] /dev/mem opened. [2025-09-24 10:31:32.226] Memory mapped at address 0xffffa650f000. [2025-09-24 10:31:32.226] Read at address 0x00600018 (0xffffa650f018): 0x00000000 [2025-09-24 10:31:32.226] Write at address 0x00600018 (0xffffa650f018): 0x00400040, readback 0x00400040 [2025-09-24 10:31:32.242] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:31:32.264] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:31:32.345] Loaded PowerVR consumer services. [2025-09-24 10:31:32.478] Waiting data available... [2025-09-24 10:31:32.478] 512+0 records in [2025-09-24 10:31:32.478] 512+0 records out [2025-09-24 10:31:32.494] Starting syslogd/klogd: done [2025-09-24 10:31:32.510] DML Start [2025-09-24 10:31:32.719] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:31:32.942] DML res1: 0 [2025-09-24 10:31:33.348] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:31:33.348] Read Success [2025-09-24 10:31:33.348] Verifying certificate... [2025-09-24 10:31:33.604] Verified OK [2025-09-24 10:31:33.620] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:31:35.351] Verified OK [2025-09-24 10:31:35.351] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:31:35.916] Verified OK [2025-09-24 10:31:35.916] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:31:38.570] fs.protected_hardlinks = 1 [2025-09-24 10:31:38.570] fs.protected_symlinks = 1 [2025-09-24 10:31:38.586] kernel.modules_disabled = 1 [2025-09-24 10:31:38.778] [2025-09-24 10:31:38.778] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:31:40.025] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:31:47.778] SBL1:1210.0.1.0 [2025-09-24 10:31:47.826] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:31:49.394] SBL2:1210.0.1.0 [2025-09-24 10:31:49.426] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:31:49.537] j-A [2025-09-24 10:31:56.910] The R5 Autosar Classic is running [2025-09-24 10:31:56.910] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:31:56.910] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:31:57.517] INIT: version 2.96 booting [2025-09-24 10:31:57.613] INIT: Entering runlevel: 5 [2025-09-24 10:31:57.773] mtd24 attached [2025-09-24 10:31:57.789] mtd28 attached [2025-09-24 10:31:57.805] mtd32 attached [2025-09-24 10:31:57.837] RTNETLINK answers: File exists [2025-09-24 10:31:57.899] ubi0:textures is mounted. [2025-09-24 10:31:57.899] ubi1:animations is mounted. [2025-09-24 10:31:57.899] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:31:57.899] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:31:57.899] ubi2:dml_code is mounted. [2025-09-24 10:31:57.899] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:31:57.899] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:31:57.899] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:31:57.899] data.LB_FadeInType0=100 [2025-09-24 10:31:57.899] data.CHLH_FadeInType0=0 [2025-09-24 10:31:57.899] data.WU_FadeInDelay=0 [2025-09-24 10:31:57.899] max_time_out=0 [2025-09-24 10:31:57.899] No splash screen [2025-09-24 10:31:57.899] stop dss Done [2025-09-24 10:31:57.931] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:31:57.965] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:31:57.965] /dev/mem opened. [2025-09-24 10:31:57.965] Memory mapped at address 0xffff9aef9000. [2025-09-24 10:31:57.965] Read at address 0x00600018 (0xffff9aef9018): 0x00000000 [2025-09-24 10:31:57.965] Write at address 0x00600018 (0xffff9aef9018): 0x00400040, readback 0x00400040 [2025-09-24 10:31:58.125] Loaded PowerVR consumer services. [2025-09-24 10:31:58.221] 512+0 records in [2025-09-24 10:31:58.221] 512+0 records out [2025-09-24 10:31:58.221] Waiting data available... [2025-09-24 10:31:58.269] Starting syslogd/klogd: done [2025-09-24 10:31:58.301] DML Start [2025-09-24 10:31:58.477] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:31:58.685] DML res1: 0 [2025-09-24 10:31:59.155] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:31:59.155] Read Success [2025-09-24 10:31:59.155] Verifying certificate... [2025-09-24 10:31:59.395] Verified OK [2025-09-24 10:31:59.411] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:32:01.015] Verified OK [2025-09-24 10:32:01.015] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:32:01.699] Verified OK [2025-09-24 10:32:01.699] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:32:04.448] fs.protected_hardlinks = 1 [2025-09-24 10:32:04.448] fs.protected_symlinks = 1 [2025-09-24 10:32:04.448] kernel.modules_disabled = 1 [2025-09-24 10:32:04.623] [2025-09-24 10:32:04.623] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:32:05.773] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:32:13.469] SBL1:1210.0.1.0 [2025-09-24 10:32:13.517] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:32:15.084] SBL2:1210.0.1.0 [2025-09-24 10:32:15.116] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:32:15.228] j-A [2025-09-24 10:32:22.601] The R5 Autosar Classic is running [2025-09-24 10:32:22.601] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:32:22.601] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:32:23.208] INIT: version 2.96 booting [2025-09-24 10:32:23.320] INIT: Entering runlevel: 5 [2025-09-24 10:32:23.480] mtd28 attached [2025-09-24 10:32:23.480] mtd24 attached [2025-09-24 10:32:23.496] mtd32 attached [2025-09-24 10:32:23.544] ubi1:textures is mounted. [2025-09-24 10:32:23.544] ubi0:animations is mounted. [2025-09-24 10:32:23.605] RTNETLINK answers: File exists [2025-09-24 10:32:23.605] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:32:23.605] ubi2:dml_code is mounted. [2025-09-24 10:32:23.605] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:32:23.605] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:32:23.605] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:32:23.605] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:32:23.605] data.LB_FadeInType0=100 [2025-09-24 10:32:23.605] data.CHLH_FadeInType0=0 [2025-09-24 10:32:23.605] data.WU_FadeInDelay=0 [2025-09-24 10:32:23.605] max_time_out=0 [2025-09-24 10:32:23.605] No splash screen [2025-09-24 10:32:23.605] stop dss Done [2025-09-24 10:32:23.653] /dev/mem opened. [2025-09-24 10:32:23.653] Memory mapped at address 0xffff9828a000. [2025-09-24 10:32:23.685] Read at address 0x00600018 (0xffff9828a018): 0x00000000 [2025-09-24 10:32:23.685] Write at address 0x00600018 (0xffff9828a018): 0x00400040, readback 0x00400040 [2025-09-24 10:32:23.685] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:32:23.685] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:32:23.845] Loaded PowerVR consumer services. [2025-09-24 10:32:23.893] 512+0 records in [2025-09-24 10:32:23.909] 512+0 records out [2025-09-24 10:32:23.941] Waiting data available... [2025-09-24 10:32:23.956] Starting syslogd/klogd: done [2025-09-24 10:32:23.973] DML Start [2025-09-24 10:32:24.165] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:32:24.388] DML res1: 0 [2025-09-24 10:32:24.810] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:32:24.810] Read Success [2025-09-24 10:32:24.810] Verifying certificate... [2025-09-24 10:32:25.098] Verified OK [2025-09-24 10:32:25.114] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:32:26.782] Verified OK [2025-09-24 10:32:26.782] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:32:27.358] Verified OK [2025-09-24 10:32:27.358] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:32:30.092] fs.protected_hardlinks = 1 [2025-09-24 10:32:30.108] fs.protected_symlinks = 1 [2025-09-24 10:32:30.108] kernel.modules_disabled = 1 [2025-09-24 10:32:30.316] [2025-09-24 10:32:30.316] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:32:31.481] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:32:39.169] SBL1:1210.0.1.0 [2025-09-24 10:32:39.217] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:32:40.784] SBL2:1210.0.1.0 [2025-09-24 10:32:40.832] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:32:40.929] j-A [2025-09-24 10:32:48.284] The R5 Autosar Classic is running [2025-09-24 10:32:48.307] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:32:48.307] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:32:48.915] INIT: version 2.96 booting [2025-09-24 10:32:49.026] INIT: Entering runlevel: 5 [2025-09-24 10:32:49.186] mtd32 attached [2025-09-24 10:32:49.186] mtd28 attached [2025-09-24 10:32:49.202] mtd24 attached [2025-09-24 10:32:49.250] RTNETLINK answers: File exists [2025-09-24 10:32:49.311] ubi0:dml_code is mounted. [2025-09-24 10:32:49.311] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:32:49.311] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:32:49.311] ubi1:animations is mounted. [2025-09-24 10:32:49.311] ubi2:textures is mounted. [2025-09-24 10:32:49.311] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:32:49.311] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:32:49.311] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:32:49.311] data.LB_FadeInType0=100 [2025-09-24 10:32:49.311] data.CHLH_FadeInType0=0 [2025-09-24 10:32:49.311] data.WU_FadeInDelay=0 [2025-09-24 10:32:49.311] max_time_out=0 [2025-09-24 10:32:49.311] No splash screen [2025-09-24 10:32:49.311] stop dss Done [2025-09-24 10:32:49.353] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:32:49.353] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:32:49.353] /dev/mem opened. [2025-09-24 10:32:49.353] Memory mapped at address 0xffff98d76000. [2025-09-24 10:32:49.379] Read at address 0x00600018 (0xffff98d76018): 0x00000000 [2025-09-24 10:32:49.379] Write at address 0x00600018 (0xffff98d76018): 0x00400040, readback 0x00400040 [2025-09-24 10:32:49.506] Loaded PowerVR consumer services. [2025-09-24 10:32:49.618] Waiting data available... [2025-09-24 10:32:49.618] 512+0 records in [2025-09-24 10:32:49.634] 512+0 records out [2025-09-24 10:32:49.682] Starting syslogd/klogd: done [2025-09-24 10:32:49.698] DML Start [2025-09-24 10:32:49.858] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:32:50.050] DML res1: 0 [2025-09-24 10:32:50.590] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:32:50.590] Read Success [2025-09-24 10:32:50.590] Verifying certificate... [2025-09-24 10:32:50.831] Verified OK [2025-09-24 10:32:50.847] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:32:52.590] Verified OK [2025-09-24 10:32:52.590] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:32:53.117] Verified OK [2025-09-24 10:32:53.117] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:32:55.643] fs.protected_hardlinks = 1 [2025-09-24 10:32:55.643] fs.protected_symlinks = 1 [2025-09-24 10:32:55.659] kernel.modules_disabled = 1 [2025-09-24 10:32:55.868] [2025-09-24 10:32:55.868] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:32:57.211] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:33:04.872] SBL1:1210.0.1.0 [2025-09-24 10:33:04.920] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:33:06.487] SBL2:1210.0.1.0 [2025-09-24 10:33:06.519] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:33:06.631] j-A [2025-09-24 10:33:13.985] The R5 Autosar Classic is running [2025-09-24 10:33:13.985] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:33:14.006] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:33:14.614] INIT: version 2.96 booting [2025-09-24 10:33:14.726] INIT: Entering runlevel: 5 [2025-09-24 10:33:14.886] mtd24 attached [2025-09-24 10:33:14.886] mtd28 attached [2025-09-24 10:33:14.918] ubi0:textures is mounted. [2025-09-24 10:33:14.992] ubi1:animations is mounted. [2025-09-24 10:33:14.992] mtd32 attached [2025-09-24 10:33:14.992] RTNETLINK answers: File exists [2025-09-24 10:33:14.992] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:33:14.992] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:33:14.992] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:33:14.992] ubi2:dml_code is mounted. [2025-09-24 10:33:14.992] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:33:14.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:33:15.020] data.LB_FadeInType0=100 [2025-09-24 10:33:15.020] data.CHLH_FadeInType0=0 [2025-09-24 10:33:15.020] data.WU_FadeInDelay=0 [2025-09-24 10:33:15.020] max_time_out=0 [2025-09-24 10:33:15.020] No splash screen [2025-09-24 10:33:15.020] stop dss Done [2025-09-24 10:33:15.052] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:33:15.068] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:33:15.101] /dev/mem opened. [2025-09-24 10:33:15.101] Memory mapped at address 0xffffb67b2000. [2025-09-24 10:33:15.101] Read at address 0x00600018 (0xffffb67b2018): 0x00000000 [2025-09-24 10:33:15.101] Write at address 0x00600018 (0xffffb67b2018): 0x00400040, readback 0x00400040 [2025-09-24 10:33:15.229] Loaded PowerVR consumer services. [2025-09-24 10:33:15.324] Waiting data available... [2025-09-24 10:33:15.340] 512+0 records in [2025-09-24 10:33:15.340] 512+0 records out [2025-09-24 10:33:15.388] Starting syslogd/klogd: done [2025-09-24 10:33:15.404] DML Start [2025-09-24 10:33:15.597] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:33:15.804] DML res1: 0 [2025-09-24 10:33:16.324] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:33:16.324] Read Success [2025-09-24 10:33:16.324] Verifying certificate... [2025-09-24 10:33:16.547] Verified OK [2025-09-24 10:33:16.563] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:33:18.355] Verified OK [2025-09-24 10:33:18.355] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:33:18.923] Verified OK [2025-09-24 10:33:18.923] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:33:21.417] fs.protected_hardlinks = 1 [2025-09-24 10:33:21.417] fs.protected_symlinks = 1 [2025-09-24 10:33:21.433] kernel.modules_disabled = 1 [2025-09-24 10:33:21.625] [2025-09-24 10:33:21.625] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:33:22.900] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:33:30.569] SBL1:1210.0.1.0 [2025-09-24 10:33:30.617] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:33:32.183] SBL2:1210.0.1.0 [2025-09-24 10:33:32.232] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:33:32.327] j-A [2025-09-24 10:33:39.683] The R5 Autosar Classic is running [2025-09-24 10:33:39.706] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:33:39.706] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:33:40.314] INIT: version 2.96 booting [2025-09-24 10:33:40.425] INIT: Entering runlevel: 5 [2025-09-24 10:33:40.569] mtd28 attached [2025-09-24 10:33:40.585] mtd24 attached [2025-09-24 10:33:40.601] mtd32 attached [2025-09-24 10:33:40.649] RTNETLINK answers: File exists [2025-09-24 10:33:40.649] ubi0:animations is mounted. [2025-09-24 10:33:40.706] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:33:40.706] ubi2:dml_code is mounted. [2025-09-24 10:33:40.706] ubi1:textures is mounted. [2025-09-24 10:33:40.706] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:33:40.706] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:33:40.706] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:33:40.706] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:33:40.706] data.LB_FadeInType0=100 [2025-09-24 10:33:40.706] data.CHLH_FadeInType0=0 [2025-09-24 10:33:40.706] data.WU_FadeInDelay=0 [2025-09-24 10:33:40.706] max_time_out=0 [2025-09-24 10:33:40.706] No splash screen [2025-09-24 10:33:40.706] stop dss Done [2025-09-24 10:33:40.754] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:33:40.787] /dev/mem opened. [2025-09-24 10:33:40.787] Memory mapped at address 0xffffb6335000. [2025-09-24 10:33:40.787] Read at address 0x00600018 (0xffffb6335018): 0x00000000 [2025-09-24 10:33:40.787] Write at address 0x00600018 (0xffffb6335018): 0x00400040, readback 0x00400040 [2025-09-24 10:33:40.787] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:33:40.867] Loaded PowerVR consumer services. [2025-09-24 10:33:41.026] 512+0 records in [2025-09-24 10:33:41.026] 512+0 records out [2025-09-24 10:33:41.026] Waiting data available... [2025-09-24 10:33:41.041] Starting syslogd/klogd: done [2025-09-24 10:33:41.057] DML Start [2025-09-24 10:33:41.218] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:33:41.425] DML res1: 0 [2025-09-24 10:33:41.887] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:33:41.887] Read Success [2025-09-24 10:33:41.887] Verifying certificate... [2025-09-24 10:33:42.126] Verified OK [2025-09-24 10:33:42.126] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:33:43.700] Verified OK [2025-09-24 10:33:43.700] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:33:44.356] Verified OK [2025-09-24 10:33:44.372] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:33:47.122] fs.protected_hardlinks = 1 [2025-09-24 10:33:47.138] fs.protected_symlinks = 1 [2025-09-24 10:33:47.138] kernel.modules_disabled = 1 [2025-09-24 10:33:47.330] [2025-09-24 10:33:47.330] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:33:48.563] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:33:56.275] SBL1:1210.0.1.0 [2025-09-24 10:33:56.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:33:57.890] SBL2:1210.0.1.0 [2025-09-24 10:33:57.922] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:33:58.034] j-A [2025-09-24 10:34:05.406] The R5 Autosar Classic is running [2025-09-24 10:34:05.406] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:34:05.406] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:34:06.013] INIT: version 2.96 booting [2025-09-24 10:34:06.126] INIT: Entering runlevel: 5 [2025-09-24 10:34:06.286] mtd32 attached [2025-09-24 10:34:06.286] mtd28 attached [2025-09-24 10:34:06.302] mtd24 attached [2025-09-24 10:34:06.334] ubi0:dml_code is mounted. [2025-09-24 10:34:06.350] RTNETLINK answers: File exists [2025-09-24 10:34:06.408] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:34:06.408] ubi1:animations is mounted. [2025-09-24 10:34:06.408] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:34:06.408] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:34:06.408] ubi2:textures is mounted. [2025-09-24 10:34:06.408] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:34:06.408] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:34:06.408] data.LB_FadeInType0=100 [2025-09-24 10:34:06.408] data.CHLH_FadeInType0=0 [2025-09-24 10:34:06.408] data.WU_FadeInDelay=0 [2025-09-24 10:34:06.408] max_time_out=0 [2025-09-24 10:34:06.408] No splash screen [2025-09-24 10:34:06.408] stop dss Done [2025-09-24 10:34:06.454] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:34:06.454] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:34:06.488] /dev/mem opened. [2025-09-24 10:34:06.488] Memory mapped at address 0xffffbbdcf000. [2025-09-24 10:34:06.488] Read at address 0x00600018 (0xffffbbdcf018): 0x00000000 [2025-09-24 10:34:06.488] Write at address 0x00600018 (0xffffbbdcf018): 0x00400040, readback 0x00400040 [2025-09-24 10:34:06.616] Loaded PowerVR consumer services. [2025-09-24 10:34:06.712] Waiting data available... [2025-09-24 10:34:06.728] 512+0 records in [2025-09-24 10:34:06.728] 512+0 records out [2025-09-24 10:34:06.744] Starting syslogd/klogd: done [2025-09-24 10:34:06.760] DML Start [2025-09-24 10:34:06.952] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:34:07.192] DML res1: 0 [2025-09-24 10:34:07.634] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:34:07.634] Read Success [2025-09-24 10:34:07.634] Verifying certificate... [2025-09-24 10:34:07.890] Verified OK [2025-09-24 10:34:07.922] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:34:09.627] Verified OK [2025-09-24 10:34:09.627] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:34:10.246] Verified OK [2025-09-24 10:34:10.246] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:34:12.835] fs.protected_hardlinks = 1 [2025-09-24 10:34:12.851] fs.protected_symlinks = 1 [2025-09-24 10:34:12.851] kernel.modules_disabled = 1 [2025-09-24 10:34:13.044] [2025-09-24 10:34:13.044] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:34:14.272] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:34:22.002] SBL1:1210.0.1.0 [2025-09-24 10:34:22.050] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:34:23.617] SBL2:1210.0.1.0 [2025-09-24 10:34:23.649] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:34:23.761] j-A [2025-09-24 10:34:31.135] The R5 Autosar Classic is running [2025-09-24 10:34:31.135] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:34:31.135] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:34:31.744] INIT: version 2.96 booting [2025-09-24 10:34:31.839] INIT: Entering runlevel: 5 [2025-09-24 10:34:31.999] mtd24 attached [2025-09-24 10:34:32.015] mtd28 attached [2025-09-24 10:34:32.047] ubi0:textures is mounted. [2025-09-24 10:34:32.063] ubi1:animations is mounted. [2025-09-24 10:34:32.063] mtd32 attached [2025-09-24 10:34:32.079] RTNETLINK answers: File exists [2025-09-24 10:34:32.138] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:34:32.138] ubi2:dml_code is mounted. [2025-09-24 10:34:32.138] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:34:32.138] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:34:32.138] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:34:32.138] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:34:32.138] data.LB_FadeInType0=100 [2025-09-24 10:34:32.138] data.CHLH_FadeInType0=0 [2025-09-24 10:34:32.138] data.WU_FadeInDelay=0 [2025-09-24 10:34:32.138] max_time_out=0 [2025-09-24 10:34:32.138] No splash screen [2025-09-24 10:34:32.138] stop dss Done [2025-09-24 10:34:32.169] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:34:32.207] /dev/mem opened. [2025-09-24 10:34:32.207] Memory mapped at address 0xffffb4211000. [2025-09-24 10:34:32.207] Read at address 0x00600018 (0xffffb4211018): 0x00000000 [2025-09-24 10:34:32.207] Write at address 0x00600018 (0xffffb4211018): 0x00400040, readback 0x00400040 [2025-09-24 10:34:32.207] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:34:32.335] Loaded PowerVR consumer services. [2025-09-24 10:34:32.459] Waiting data available... [2025-09-24 10:34:32.459] 512+0 records in [2025-09-24 10:34:32.459] 512+0 records out [2025-09-24 10:34:32.492] Starting syslogd/klogd: done [2025-09-24 10:34:32.508] DML Start [2025-09-24 10:34:32.716] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:34:32.924] DML res1: 0 [2025-09-24 10:34:33.369] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:34:33.369] Read Success [2025-09-24 10:34:33.369] Verifying certificate... [2025-09-24 10:34:33.625] Verified OK [2025-09-24 10:34:33.641] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:34:35.425] Verified OK [2025-09-24 10:34:35.425] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:34:36.016] Verified OK [2025-09-24 10:34:36.016] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:34:38.526] fs.protected_hardlinks = 1 [2025-09-24 10:34:38.542] fs.protected_symlinks = 1 [2025-09-24 10:34:38.542] kernel.modules_disabled = 1 [2025-09-24 10:34:38.733] [2025-09-24 10:34:38.733] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:34:40.010] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:34:47.699] SBL1:1210.0.1.0 [2025-09-24 10:34:47.747] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:34:49.313] SBL2:1210.0.1.0 [2025-09-24 10:34:49.345] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:34:49.457] j-A [2025-09-24 10:34:56.812] The R5 Autosar Classic is running [2025-09-24 10:34:56.812] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:34:56.832] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:34:57.440] INIT: version 2.96 booting [2025-09-24 10:34:57.552] INIT: Entering runlevel: 5 [2025-09-24 10:34:57.713] mtd24 attached [2025-09-24 10:34:57.713] mtd28 attached [2025-09-24 10:34:57.729] mtd32 attached [2025-09-24 10:34:57.776] ubi0:textures is mounted. [2025-09-24 10:34:57.776] RTNETLINK answers: File exists [2025-09-24 10:34:57.840] ubi2:dml_code is mounted. [2025-09-24 10:34:57.840] ubi1:animations is mounted. [2025-09-24 10:34:57.840] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:34:57.840] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:34:57.840] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:34:57.840] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:34:57.840] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:34:57.840] data.LB_FadeInType0=100 [2025-09-24 10:34:57.840] data.CHLH_FadeInType0=0 [2025-09-24 10:34:57.840] data.WU_FadeInDelay=0 [2025-09-24 10:34:57.840] max_time_out=0 [2025-09-24 10:34:57.840] No splash screen [2025-09-24 10:34:57.840] stop dss Done [2025-09-24 10:34:57.905] /dev/mem opened. [2025-09-24 10:34:57.905] Memory mapped at address 0xffffbccda000. [2025-09-24 10:34:57.905] Read at address 0x00600018 (0xffffbccda018): 0x00000000 [2025-09-24 10:34:57.905] Write at address 0x00600018 (0xffffbccda018): 0x00400040, readback 0x00400040 [2025-09-24 10:34:57.905] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:34:57.921] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:34:58.049] Loaded PowerVR consumer services. [2025-09-24 10:34:58.161] Waiting data available... [2025-09-24 10:34:58.161] 512+0 records in [2025-09-24 10:34:58.161] 512+0 records out [2025-09-24 10:34:58.209] Starting syslogd/klogd: done [2025-09-24 10:34:58.225] DML Start [2025-09-24 10:34:58.384] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:34:58.608] DML res1: 0 [2025-09-24 10:34:59.112] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:34:59.112] Read Success [2025-09-24 10:34:59.112] Verifying certificate... [2025-09-24 10:34:59.383] Verified OK [2025-09-24 10:34:59.399] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:35:01.014] Verified OK [2025-09-24 10:35:01.014] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:35:01.618] Verified OK [2025-09-24 10:35:01.618] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:35:04.335] fs.protected_hardlinks = 1 [2025-09-24 10:35:04.335] fs.protected_symlinks = 1 [2025-09-24 10:35:04.335] kernel.modules_disabled = 1 [2025-09-24 10:35:04.511] [2025-09-24 10:35:04.511] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:35:05.722] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:35:13.410] SBL1:1210.0.1.0 [2025-09-24 10:35:13.458] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:35:15.025] SBL2:1210.0.1.0 [2025-09-24 10:35:15.073] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:35:15.169] j-A [2025-09-24 10:35:22.544] The R5 Autosar Classic is running [2025-09-24 10:35:22.544] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:35:22.544] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:35:23.152] INIT: version 2.96 booting [2025-09-24 10:35:23.248] INIT: Entering runlevel: 5 [2025-09-24 10:35:23.408] mtd24 attached [2025-09-24 10:35:23.424] mtd28 attached [2025-09-24 10:35:23.455] ubi0:textures is mounted. [2025-09-24 10:35:23.455] mtd32 attached [2025-09-24 10:35:23.471] ubi1:animations is mounted. [2025-09-24 10:35:23.487] RTNETLINK answers: File exists [2025-09-24 10:35:23.539] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:35:23.539] ubi2:dml_code is mounted. [2025-09-24 10:35:23.539] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:35:23.539] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:35:23.539] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:35:23.539] data.LB_FadeInType0=100 [2025-09-24 10:35:23.539] data.CHLH_FadeInType0=0 [2025-09-24 10:35:23.539] data.WU_FadeInDelay=0 [2025-09-24 10:35:23.539] max_time_out=0 [2025-09-24 10:35:23.539] No splash screen [2025-09-24 10:35:23.539] stop dss Done [2025-09-24 10:35:23.539] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:35:23.602] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:35:23.602] /dev/mem opened. [2025-09-24 10:35:23.602] Memory mapped at address 0xffff92d32000. [2025-09-24 10:35:23.602] Read at address 0x00600018 (0xffff92d32018): 0x00000000 [2025-09-24 10:35:23.602] Write at address 0x00600018 (0xffff92d32018): 0x00400040, readback 0x00400040 [2025-09-24 10:35:23.602] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:35:23.858] Loaded PowerVR consumer services. [2025-09-24 10:35:23.858] Waiting data available... [2025-09-24 10:35:23.890] 512+0 records in [2025-09-24 10:35:23.890] 512+0 records out [2025-09-24 10:35:23.939] Starting syslogd/klogd: done [2025-09-24 10:35:23.955] DML Start [2025-09-24 10:35:24.130] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:35:24.386] DML res1: 0 [2025-09-24 10:35:24.720] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:35:24.720] Read Success [2025-09-24 10:35:24.720] Verifying certificate... [2025-09-24 10:35:24.959] Verified OK [2025-09-24 10:35:24.975] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:35:26.575] Verified OK [2025-09-24 10:35:26.575] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:35:27.183] Verified OK [2025-09-24 10:35:27.183] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:35:29.869] fs.protected_hardlinks = 1 [2025-09-24 10:35:29.885] fs.protected_symlinks = 1 [2025-09-24 10:35:29.885] kernel.modules_disabled = 1 [2025-09-24 10:35:30.076] [2025-09-24 10:35:30.076] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:35:31.468] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:35:39.142] SBL1:1210.0.1.0 [2025-09-24 10:35:39.190] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:35:40.757] SBL2:1210.0.1.0 [2025-09-24 10:35:40.805] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 10:35:40.900] j-A [2025-09-24 10:35:48.256] The R5 Autosar Classic is running [2025-09-24 10:35:48.256] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:35:48.276] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:35:48.884] INIT: version 2.96 booting [2025-09-24 10:35:48.996] INIT: Entering runlevel: 5 [2025-09-24 10:35:49.155] mtd24 attached [2025-09-24 10:35:49.155] mtd32 attached [2025-09-24 10:35:49.171] mtd28 attached [2025-09-24 10:35:49.219] RTNETLINK answers: File exists [2025-09-24 10:35:49.288] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:35:49.288] ubi1:dml_code is mounted. [2025-09-24 10:35:49.288] ubi2:animations is mounted. [2025-09-24 10:35:49.288] ubi0:textures is mounted. [2025-09-24 10:35:49.288] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:35:49.288] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:35:49.288] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:35:49.288] data.LB_FadeInType0=100 [2025-09-24 10:35:49.288] data.CHLH_FadeInType0=0 [2025-09-24 10:35:49.288] data.WU_FadeInDelay=0 [2025-09-24 10:35:49.288] max_time_out=0 [2025-09-24 10:35:49.288] No splash screen [2025-09-24 10:35:49.288] stop dss Done [2025-09-24 10:35:49.288] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:35:49.304] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:35:49.352] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:35:49.352] /dev/mem opened. [2025-09-24 10:35:49.352] Memory mapped at address 0xffffa77b2000. [2025-09-24 10:35:49.352] Read at address 0x00600018 (0xffffa77b2018): 0x00000000 [2025-09-24 10:35:49.352] Write at address 0x00600018 (0xffffa77b2018): 0x00400040, readback 0x00400040 [2025-09-24 10:35:49.512] Loaded PowerVR consumer services. [2025-09-24 10:35:49.620] 512+0 records in [2025-09-24 10:35:49.620] 512+0 records out [2025-09-24 10:35:49.620] Waiting data available... [2025-09-24 10:35:49.636] Starting syslogd/klogd: done [2025-09-24 10:35:49.651] DML Start [2025-09-24 10:35:49.811] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:35:50.002] DML res1: 0 [2025-09-24 10:35:50.508] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:35:50.508] Read Success [2025-09-24 10:35:50.508] Verifying certificate... [2025-09-24 10:35:50.747] Verified OK [2025-09-24 10:35:50.763] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:35:52.435] Verified OK [2025-09-24 10:35:52.435] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:35:52.942] Verified OK [2025-09-24 10:35:52.942] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:35:55.452] fs.protected_hardlinks = 1 [2025-09-24 10:35:55.468] fs.protected_symlinks = 1 [2025-09-24 10:35:55.468] kernel.modules_disabled = 1 [2025-09-24 10:35:55.660] [2025-09-24 10:35:55.660] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:35:57.143] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:36:04.874] SBL1:1210.0.1.0 [2025-09-24 10:36:04.922] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:36:06.488] SBL2:1210.0.1.0 [2025-09-24 10:36:06.520] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:36:06.632] j-A [2025-09-24 10:36:14.005] The R5 Autosar Classic is running [2025-09-24 10:36:14.005] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:36:14.005] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:36:14.613] INIT: version 2.96 booting [2025-09-24 10:36:14.725] INIT: Entering runlevel: 5 [2025-09-24 10:36:14.869] mtd32 attached [2025-09-24 10:36:14.885] mtd24 attached [2025-09-24 10:36:14.901] mtd28 attached [2025-09-24 10:36:14.933] ubi0:dml_code is mounted. [2025-09-24 10:36:14.949] RTNETLINK answers: File exists [2025-09-24 10:36:15.005] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:36:15.005] ubi2:animations is mounted. [2025-09-24 10:36:15.005] ubi1:textures is mounted. [2025-09-24 10:36:15.005] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:36:15.005] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:36:15.005] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:36:15.005] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:36:15.005] data.LB_FadeInType0=100 [2025-09-24 10:36:15.005] data.CHLH_FadeInType0=0 [2025-09-24 10:36:15.005] data.WU_FadeInDelay=0 [2025-09-24 10:36:15.005] max_time_out=0 [2025-09-24 10:36:15.005] No splash screen [2025-09-24 10:36:15.005] stop dss Done [2025-09-24 10:36:15.036] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:36:15.052] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:36:15.084] /dev/mem opened. [2025-09-24 10:36:15.084] Memory mapped at address 0xffff85b2b000. [2025-09-24 10:36:15.084] Read at address 0x00600018 (0xffff85b2b018): 0x00000000 [2025-09-24 10:36:15.084] Write at address 0x00600018 (0xffff85b2b018): 0x00400040, readback 0x00400040 [2025-09-24 10:36:15.245] Loaded PowerVR consumer services. [2025-09-24 10:36:15.341] 512+0 records in [2025-09-24 10:36:15.341] 512+0 records out [2025-09-24 10:36:15.356] Waiting data available... [2025-09-24 10:36:15.388] Starting syslogd/klogd: done [2025-09-24 10:36:15.404] DML Start [2025-09-24 10:36:15.597] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:36:15.804] DML res1: 0 [2025-09-24 10:36:16.220] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:36:16.241] Read Success [2025-09-24 10:36:16.241] Verifying certificate... [2025-09-24 10:36:16.465] Verified OK [2025-09-24 10:36:16.481] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:36:18.127] Verified OK [2025-09-24 10:36:18.127] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:36:18.793] Verified OK [2025-09-24 10:36:18.793] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:36:21.543] fs.protected_hardlinks = 1 [2025-09-24 10:36:21.559] fs.protected_symlinks = 1 [2025-09-24 10:36:21.559] kernel.modules_disabled = 1 [2025-09-24 10:36:21.751] [2025-09-24 10:36:21.751] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:36:22.927] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:36:30.588] SBL1:1210.0.1.0 [2025-09-24 10:36:30.620] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:36:32.203] SBL2:1210.0.1.0 [2025-09-24 10:36:32.235] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 10:36:32.347] j-A [2025-09-24 10:36:39.687] The R5 Autosar Classic is running [2025-09-24 10:36:39.718] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:36:39.718] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:36:40.325] INIT: version 2.96 booting [2025-09-24 10:36:40.438] INIT: Entering runlevel: 5 [2025-09-24 10:36:40.597] mtd32 attached [2025-09-24 10:36:40.597] mtd28 attached [2025-09-24 10:36:40.613] mtd24 attached [2025-09-24 10:36:40.676] RTNETLINK answers: File exists [2025-09-24 10:36:40.676] ubi0:dml_code is mounted. [2025-09-24 10:36:40.676] ubi1:animations is mounted. [2025-09-24 10:36:40.676] ubi2:textures is mounted. [2025-09-24 10:36:40.676] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:36:40.730] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:36:40.730] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:36:40.730] data.LB_FadeInType0=100 [2025-09-24 10:36:40.730] data.CHLH_FadeInType0=0 [2025-09-24 10:36:40.730] data.WU_FadeInDelay=0 [2025-09-24 10:36:40.730] max_time_out=0 [2025-09-24 10:36:40.730] No splash screen [2025-09-24 10:36:40.730] stop dss Done [2025-09-24 10:36:40.730] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:36:40.730] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:36:40.796] /dev/mem opened. [2025-09-24 10:36:40.796] Memory mapped at address 0xffff99739000. [2025-09-24 10:36:40.796] Read at address 0x00600018 (0xffff99739018): 0x00000000 [2025-09-24 10:36:40.796] Write at address 0x00600018 (0xffff99739018): 0x00400040, readback 0x00400040 [2025-09-24 10:36:40.812] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:36:40.828] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:36:40.940] Loaded PowerVR consumer services. [2025-09-24 10:36:41.036] 512+0 records in [2025-09-24 10:36:41.036] 512+0 records out [2025-09-24 10:36:41.051] Waiting data available... [2025-09-24 10:36:41.067] Starting syslogd/klogd: done [2025-09-24 10:36:41.099] DML Start [2025-09-24 10:36:41.292] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:36:41.500] DML res1: 0 [2025-09-24 10:36:41.969] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:36:41.969] Read Success [2025-09-24 10:36:41.969] Verifying certificate... [2025-09-24 10:36:42.192] Verified OK [2025-09-24 10:36:42.207] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:36:43.759] Verified OK [2025-09-24 10:36:43.775] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:36:44.425] Verified OK [2025-09-24 10:36:44.425] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:36:47.222] fs.protected_hardlinks = 1 [2025-09-24 10:36:47.238] fs.protected_symlinks = 1 [2025-09-24 10:36:47.238] kernel.modules_disabled = 1 [2025-09-24 10:36:47.431] [2025-09-24 10:36:47.431] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:36:48.591] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:36:56.286] SBL1:1210.0.1.0 [2025-09-24 10:36:56.334] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:36:57.901] SBL2:1210.0.1.0 [2025-09-24 10:36:57.933] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:36:58.046] j-A [2025-09-24 10:37:05.422] The R5 Autosar Classic is running [2025-09-24 10:37:05.422] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:37:05.422] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:37:06.030] INIT: version 2.96 booting [2025-09-24 10:37:06.142] INIT: Entering runlevel: 5 [2025-09-24 10:37:06.286] mtd32 attached [2025-09-24 10:37:06.302] mtd28 attached [2025-09-24 10:37:06.302] mtd24 attached [2025-09-24 10:37:06.396] RTNETLINK answers: File exists [2025-09-24 10:37:06.396] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:37:06.396] ubi2:textures is mounted. [2025-09-24 10:37:06.396] ubi0:dml_code is mounted. [2025-09-24 10:37:06.396] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:37:06.396] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:37:06.396] ubi1:animations is mounted. [2025-09-24 10:37:06.396] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:37:06.396] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:37:06.412] data.LB_FadeInType0=100 [2025-09-24 10:37:06.438] data.CHLH_FadeInType0=0 [2025-09-24 10:37:06.438] data.WU_FadeInDelay=0 [2025-09-24 10:37:06.438] max_time_out=0 [2025-09-24 10:37:06.438] No splash screen [2025-09-24 10:37:06.438] stop dss Done [2025-09-24 10:37:06.438] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:37:06.454] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:37:06.486] /dev/mem opened. [2025-09-24 10:37:06.486] Memory mapped at address 0xffffa3cce000. [2025-09-24 10:37:06.512] Read at address 0x00600018 (0xffffa3cce018): 0x00000000 [2025-09-24 10:37:06.512] Write at address 0x00600018 (0xffffa3cce018): 0x00400040, readback 0x00400040 [2025-09-24 10:37:06.688] Loaded PowerVR consumer services. [2025-09-24 10:37:06.720] 512+0 records in [2025-09-24 10:37:06.736] 512+0 records out [2025-09-24 10:37:06.752] Waiting data available... [2025-09-24 10:37:06.752] Starting syslogd/klogd: done [2025-09-24 10:37:06.784] DML Start [2025-09-24 10:37:06.943] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:37:07.168] DML res1: 0 [2025-09-24 10:37:07.702] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:37:07.702] Read Success [2025-09-24 10:37:07.702] Verifying certificate... [2025-09-24 10:37:07.974] Verified OK [2025-09-24 10:37:08.006] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:37:09.714] Verified OK [2025-09-24 10:37:09.714] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:37:10.225] Verified OK [2025-09-24 10:37:10.225] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:37:12.816] fs.protected_hardlinks = 1 [2025-09-24 10:37:12.832] fs.protected_symlinks = 1 [2025-09-24 10:37:12.832] kernel.modules_disabled = 1 [2025-09-24 10:37:13.023] [2025-09-24 10:37:13.023] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:37:14.260] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:37:22.012] SBL1:1210.0.1.0 [2025-09-24 10:37:22.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:37:23.627] SBL2:1210.0.1.0 [2025-09-24 10:37:23.659] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:37:23.755] j-A [2025-09-24 10:37:31.112] The R5 Autosar Classic is running [2025-09-24 10:37:31.136] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:37:31.136] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:37:31.743] INIT: version 2.96 booting [2025-09-24 10:37:31.855] INIT: Entering runlevel: 5 [2025-09-24 10:37:32.014] mtd24 attached [2025-09-24 10:37:32.014] mtd28 attached [2025-09-24 10:37:32.030] mtd32 attached [2025-09-24 10:37:32.063] ubi0:textures is mounted. [2025-09-24 10:37:32.079] RTNETLINK answers: File exists [2025-09-24 10:37:32.145] ubi2:dml_code is mounted. [2025-09-24 10:37:32.145] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:37:32.145] ubi1:animations is mounted. [2025-09-24 10:37:32.145] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:37:32.145] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:37:32.145] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:37:32.145] data.LB_FadeInType0=100 [2025-09-24 10:37:32.145] data.CHLH_FadeInType0=0 [2025-09-24 10:37:32.145] data.WU_FadeInDelay=0 [2025-09-24 10:37:32.145] max_time_out=0 [2025-09-24 10:37:32.145] No splash screen [2025-09-24 10:37:32.145] stop dss Done [2025-09-24 10:37:32.145] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:37:32.215] /dev/mem opened. [2025-09-24 10:37:32.215] Memory mapped at address 0xffff953ce000. [2025-09-24 10:37:32.215] Read at address 0x00600018 (0xffff953ce018): 0x00000000 [2025-09-24 10:37:32.215] Write at address 0x00600018 (0xffff953ce018): 0x00400040, readback 0x00400040 [2025-09-24 10:37:32.215] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:37:32.242] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:37:32.418] Loaded PowerVR consumer services. [2025-09-24 10:37:32.450] 512+0 records in [2025-09-24 10:37:32.450] 512+0 records out [2025-09-24 10:37:32.497] Starting syslogd/klogd: Waiting data available... [2025-09-24 10:37:32.513] done [2025-09-24 10:37:32.513] DML Start [2025-09-24 10:37:32.673] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:37:32.897] DML res1: 0 [2025-09-24 10:37:33.383] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:37:33.383] Read Success [2025-09-24 10:37:33.383] Verifying certificate... [2025-09-24 10:37:33.623] Verified OK [2025-09-24 10:37:33.623] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:37:35.189] Verified OK [2025-09-24 10:37:35.189] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:37:35.773] Verified OK [2025-09-24 10:37:35.773] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:37:38.554] fs.protected_hardlinks = 1 [2025-09-24 10:37:38.570] fs.protected_symlinks = 1 [2025-09-24 10:37:38.570] kernel.modules_disabled = 1 [2025-09-24 10:37:38.762] [2025-09-24 10:37:38.762] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:37:40.013] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:37:47.724] SBL1:1210.0.1.0 [2025-09-24 10:37:47.755] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:37:49.338] SBL2:1210.0.1.0 [2025-09-24 10:37:49.370] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:37:49.482] j-A [2025-09-24 10:37:56.822] The R5 Autosar Classic is running [2025-09-24 10:37:56.847] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:37:56.847] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:37:57.455] INIT: version 2.96 booting [2025-09-24 10:37:57.567] INIT: Entering runlevel: 5 [2025-09-24 10:37:57.743] mtd32 attached [2025-09-24 10:37:57.743] mtd28 attached [2025-09-24 10:37:57.759] mtd24 attached [2025-09-24 10:37:57.807] RTNETLINK answers: File exists [2025-09-24 10:37:57.869] ubi0:dml_code is mounted. [2025-09-24 10:37:57.869] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:37:57.869] ubi1:animations is mounted. [2025-09-24 10:37:57.869] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:37:57.869] ubi2:textures is mounted. [2025-09-24 10:37:57.869] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:37:57.869] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:37:57.869] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:37:57.869] data.LB_FadeInType0=100 [2025-09-24 10:37:57.869] data.CHLH_FadeInType0=0 [2025-09-24 10:37:57.869] data.WU_FadeInDelay=0 [2025-09-24 10:37:57.869] max_time_out=0 [2025-09-24 10:37:57.869] No splash screen [2025-09-24 10:37:57.869] stop dss Done [2025-09-24 10:37:57.900] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:37:57.917] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:37:57.958] /dev/mem opened. [2025-09-24 10:37:57.958] Memory mapped at address 0xffffa4c59000. [2025-09-24 10:37:57.958] Read at address 0x00600018 (0xffffa4c59018): 0x00000000 [2025-09-24 10:37:57.958] Write at address 0x00600018 (0xffffa4c59018): 0x00400040, readback 0x00400040 [2025-09-24 10:37:58.119] Loaded PowerVR consumer services. [2025-09-24 10:37:58.167] 512+0 records in [2025-09-24 10:37:58.167] 512+0 records out [2025-09-24 10:37:58.199] Waiting data available... [2025-09-24 10:37:58.214] Starting syslogd/klogd: done [2025-09-24 10:37:58.230] DML Start [2025-09-24 10:37:58.407] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:37:58.631] DML res1: 0 [2025-09-24 10:37:59.078] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:37:59.103] Read Success [2025-09-24 10:37:59.103] Verifying certificate... [2025-09-24 10:37:59.375] Verified OK [2025-09-24 10:37:59.391] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:38:00.942] Verified OK [2025-09-24 10:38:00.942] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:38:01.621] Verified OK [2025-09-24 10:38:01.621] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:38:04.211] fs.protected_hardlinks = 1 [2025-09-24 10:38:04.227] fs.protected_symlinks = 1 [2025-09-24 10:38:04.227] kernel.modules_disabled = 1 [2025-09-24 10:38:04.419] [2025-09-24 10:38:04.419] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:38:05.727] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:38:13.444] SBL1:1210.0.1.0 [2025-09-24 10:38:13.475] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:38:15.058] SBL2:1210.0.1.0 [2025-09-24 10:38:15.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:38:15.202] j-A [2025-09-24 10:38:22.542] The R5 Autosar Classic is running [2025-09-24 10:38:22.573] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:38:22.573] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:38:23.180] INIT: version 2.96 booting [2025-09-24 10:38:23.293] INIT: Entering runlevel: 5 [2025-09-24 10:38:23.452] mtd24 attached [2025-09-24 10:38:23.452] mtd28 attached [2025-09-24 10:38:23.468] mtd32 attached [2025-09-24 10:38:23.516] ubi0:textures is mounted. [2025-09-24 10:38:23.516] RTNETLINK answers: File exists [2025-09-24 10:38:23.581] ubi1:animations is mounted. [2025-09-24 10:38:23.581] ubi2:dml_code is mounted. [2025-09-24 10:38:23.581] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:38:23.581] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:38:23.581] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:38:23.581] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:38:23.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:38:23.581] data.LB_FadeInType0=100 [2025-09-24 10:38:23.581] data.CHLH_FadeInType0=0 [2025-09-24 10:38:23.581] data.WU_FadeInDelay=0 [2025-09-24 10:38:23.581] max_time_out=0 [2025-09-24 10:38:23.581] No splash screen [2025-09-24 10:38:23.581] stop dss Done [2025-09-24 10:38:23.638] /dev/mem opened. [2025-09-24 10:38:23.638] Memory mapped at address 0xffffa1fb5000. [2025-09-24 10:38:23.638] Read at address 0x00600018 (0xffffa1fb5018): 0x00000000 [2025-09-24 10:38:23.638] Write at address 0x00600018 (0xffffa1fb5018): 0x00400040, readback 0x00400040 [2025-09-24 10:38:23.638] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:38:23.638] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:38:23.766] Loaded PowerVR consumer services. [2025-09-24 10:38:23.878] Waiting data available... [2025-09-24 10:38:23.894] 512+0 records in [2025-09-24 10:38:23.894] 512+0 records out [2025-09-24 10:38:23.910] Starting syslogd/klogd: done [2025-09-24 10:38:23.926] DML Start [2025-09-24 10:38:24.085] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:38:24.293] DML res1: 0 [2025-09-24 10:38:24.830] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:38:24.830] Read Success [2025-09-24 10:38:24.830] Verifying certificate... [2025-09-24 10:38:25.070] Verified OK [2025-09-24 10:38:25.086] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:38:26.758] Verified OK [2025-09-24 10:38:26.758] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:38:27.386] Verified OK [2025-09-24 10:38:27.386] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:38:30.056] fs.protected_hardlinks = 1 [2025-09-24 10:38:30.072] fs.protected_symlinks = 1 [2025-09-24 10:38:30.088] kernel.modules_disabled = 1 [2025-09-24 10:38:30.264] [2025-09-24 10:38:30.265] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:38:31.447] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:38:39.167] SBL1:1210.0.1.0 [2025-09-24 10:38:39.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:38:40.781] SBL2:1210.0.1.0 [2025-09-24 10:38:40.813] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:38:40.925] j-A [2025-09-24 10:38:48.264] The R5 Autosar Classic is running [2025-09-24 10:38:48.296] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:38:48.296] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:38:48.903] INIT: version 2.96 booting [2025-09-24 10:38:49.015] INIT: Entering runlevel: 5 [2025-09-24 10:38:49.159] mtd24 attached [2025-09-24 10:38:49.175] mtd28 attached [2025-09-24 10:38:49.191] mtd32 attached [2025-09-24 10:38:49.223] ubi0:textures is mounted. [2025-09-24 10:38:49.239] ubi1:animations is mounted. [2025-09-24 10:38:49.239] RTNETLINK answers: File exists [2025-09-24 10:38:49.298] ubi2:dml_code is mounted. [2025-09-24 10:38:49.298] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:38:49.298] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:38:49.298] data.LB_FadeInType0=100 [2025-09-24 10:38:49.298] data.CHLH_FadeInType0=0 [2025-09-24 10:38:49.298] data.WU_FadeInDelay=0 [2025-09-24 10:38:49.298] max_time_out=0 [2025-09-24 10:38:49.298] No splash screen [2025-09-24 10:38:49.298] stop dss Done [2025-09-24 10:38:49.298] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:38:49.298] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:38:49.298] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:38:49.377] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:38:49.377] /dev/mem opened. [2025-09-24 10:38:49.377] Memory mapped at address 0xffff92430000. [2025-09-24 10:38:49.377] Read at address 0x00600018 (0xffff92430018): 0x00000000 [2025-09-24 10:38:49.377] Write at address 0x00600018 (0xffff92430018): 0x00400040, readback 0x00400040 [2025-09-24 10:38:49.377] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:38:49.584] Loaded PowerVR consumer services. [2025-09-24 10:38:49.617] 512+0 records in [2025-09-24 10:38:49.633] 512+0 records out [2025-09-24 10:38:49.649] Waiting data available... [2025-09-24 10:38:49.681] Starting syslogd/klogd: done [2025-09-24 10:38:49.697] DML Start [2025-09-24 10:38:49.856] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:38:50.081] DML res1: 0 [2025-09-24 10:38:50.524] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:38:50.524] Read Success [2025-09-24 10:38:50.524] Verifying certificate... [2025-09-24 10:38:50.795] Verified OK [2025-09-24 10:38:50.827] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:38:52.650] Verified OK [2025-09-24 10:38:52.650] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:38:53.120] Verified OK [2025-09-24 10:38:53.120] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:38:55.438] fs.protected_hardlinks = 1 [2025-09-24 10:38:55.454] fs.protected_symlinks = 1 [2025-09-24 10:38:55.454] kernel.modules_disabled = 1 [2025-09-24 10:38:55.663] [2025-09-24 10:38:55.663] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:38:57.194] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:39:04.890] SBL1:1210.0.1.0 [2025-09-24 10:39:04.938] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:39:06.504] SBL2:1210.0.1.0 [2025-09-24 10:39:06.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:39:06.649] j-A [2025-09-24 10:39:14.024] The R5 Autosar Classic is running [2025-09-24 10:39:14.024] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:39:14.024] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:39:14.632] INIT: version 2.96 booting [2025-09-24 10:39:14.744] INIT: Entering runlevel: 5 [2025-09-24 10:39:14.903] mtd24 attached [2025-09-24 10:39:14.903] mtd28 attached [2025-09-24 10:39:14.920] mtd32 attached [2025-09-24 10:39:14.936] ubi0:textures is mounted. [2025-09-24 10:39:14.968] ubi1:animations is mounted. [2025-09-24 10:39:15.033] RTNETLINK answers: File exists [2025-09-24 10:39:15.033] ubi2:dml_code is mounted. [2025-09-24 10:39:15.033] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:39:15.033] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:39:15.033] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:39:15.033] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:39:15.033] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:39:15.033] data.LB_FadeInType0=100 [2025-09-24 10:39:15.033] data.CHLH_FadeInType0=0 [2025-09-24 10:39:15.033] data.WU_FadeInDelay=0 [2025-09-24 10:39:15.033] max_time_out=0 [2025-09-24 10:39:15.033] No splash screen [2025-09-24 10:39:15.033] stop dss Done [2025-09-24 10:39:15.102] /dev/mem opened. [2025-09-24 10:39:15.102] Memory mapped at address 0xffffaf795000. [2025-09-24 10:39:15.102] Read at address 0x00600018 (0xffffaf795018): 0x00000000 [2025-09-24 10:39:15.102] Write at address 0x00600018 (0xffffaf795018): 0x00400040, readback 0x00400040 [2025-09-24 10:39:15.118] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:39:15.134] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:39:15.295] Loaded PowerVR consumer services. [2025-09-24 10:39:15.327] 512+0 records in [2025-09-24 10:39:15.327] 512+0 records out [2025-09-24 10:39:15.374] Starting syslogd/klogd: Waiting data available... [2025-09-24 10:39:15.406] done [2025-09-24 10:39:15.406] DML Start [2025-09-24 10:39:15.598] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:39:15.838] DML res1: 0 [2025-09-24 10:39:16.297] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:39:16.297] Read Success [2025-09-24 10:39:16.297] Verifying certificate... [2025-09-24 10:39:16.521] Verified OK [2025-09-24 10:39:16.537] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:39:18.168] Verified OK [2025-09-24 10:39:18.168] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:39:18.852] Verified OK [2025-09-24 10:39:18.852] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:39:21.540] fs.protected_hardlinks = 1 [2025-09-24 10:39:21.555] fs.protected_symlinks = 1 [2025-09-24 10:39:21.555] kernel.modules_disabled = 1 [2025-09-24 10:39:21.763] [2025-09-24 10:39:21.763] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:39:22.898] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:39:30.599] SBL1:1210.0.1.0 [2025-09-24 10:39:30.630] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:39:32.214] SBL2:1210.0.1.0 [2025-09-24 10:39:32.246] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:39:32.358] j-A [2025-09-24 10:39:39.730] The R5 Autosar Classic is running [2025-09-24 10:39:39.730] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:39:39.730] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:39:40.337] INIT: version 2.96 booting [2025-09-24 10:39:40.450] INIT: Entering runlevel: 5 [2025-09-24 10:39:40.609] mtd28 attached [2025-09-24 10:39:40.609] mtd24 attached [2025-09-24 10:39:40.625] mtd32 attached [2025-09-24 10:39:40.673] ubi0:animations is mounted. [2025-09-24 10:39:40.673] RTNETLINK answers: File exists [2025-09-24 10:39:40.739] ubi1:textures is mounted. [2025-09-24 10:39:40.739] ubi2:dml_code is mounted. [2025-09-24 10:39:40.739] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:39:40.739] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:39:40.739] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:39:40.739] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:39:40.739] data.LB_FadeInType0=100 [2025-09-24 10:39:40.739] data.CHLH_FadeInType0=0 [2025-09-24 10:39:40.739] data.WU_FadeInDelay=0 [2025-09-24 10:39:40.739] max_time_out=0 [2025-09-24 10:39:40.739] No splash screen [2025-09-24 10:39:40.739] stop dss Done [2025-09-24 10:39:40.739] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:39:40.786] /dev/mem opened. [2025-09-24 10:39:40.823] Memory mapped at address 0xffff88da3000. [2025-09-24 10:39:40.823] Read at address 0x00600018 (0xffff88da3018): 0x00000000 [2025-09-24 10:39:40.823] Write at address 0x00600018 (0xffff88da3018): 0x00400040, readback 0x00400040 [2025-09-24 10:39:40.823] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:39:40.823] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:39:40.935] Loaded PowerVR consumer services. [2025-09-24 10:39:41.031] 512+0 records in [2025-09-24 10:39:41.031] 512+0 records out [2025-09-24 10:39:41.063] Waiting data available... [2025-09-24 10:39:41.095] Starting syslogd/klogd: done [2025-09-24 10:39:41.111] DML Start [2025-09-24 10:39:41.318] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:39:41.527] DML res1: 0 [2025-09-24 10:39:41.894] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:39:41.894] Read Success [2025-09-24 10:39:41.894] Verifying certificate... [2025-09-24 10:39:42.117] Verified OK [2025-09-24 10:39:42.133] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:39:43.620] Verified OK [2025-09-24 10:39:43.620] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:39:44.289] Verified OK [2025-09-24 10:39:44.289] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:39:47.184] fs.protected_hardlinks = 1 [2025-09-24 10:39:47.184] fs.protected_symlinks = 1 [2025-09-24 10:39:47.200] kernel.modules_disabled = 1 [2025-09-24 10:39:47.392] [2025-09-24 10:39:47.392] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:39:48.615] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:39:56.304] SBL1:1210.0.1.0 [2025-09-24 10:39:56.352] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:39:57.919] SBL2:1210.0.1.0 [2025-09-24 10:39:57.967] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:39:58.063] j-A [2025-09-24 10:40:05.417] The R5 Autosar Classic is running [2025-09-24 10:40:05.439] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:40:05.439] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:40:06.047] INIT: version 2.96 booting [2025-09-24 10:40:06.159] INIT: Entering runlevel: 5 [2025-09-24 10:40:06.303] mtd24 attached [2025-09-24 10:40:06.319] mtd28 attached [2025-09-24 10:40:06.350] ubi0:textures is mounted. [2025-09-24 10:40:06.366] ubi1:animations is mounted. [2025-09-24 10:40:06.366] mtd32 attached [2025-09-24 10:40:06.382] RTNETLINK answers: File exists [2025-09-24 10:40:06.443] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:40:06.443] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:40:06.443] ubi2:dml_code is mounted. [2025-09-24 10:40:06.443] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:40:06.443] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:40:06.443] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:40:06.443] data.LB_FadeInType0=100 [2025-09-24 10:40:06.443] data.CHLH_FadeInType0=0 [2025-09-24 10:40:06.443] data.WU_FadeInDelay=0 [2025-09-24 10:40:06.443] max_time_out=0 [2025-09-24 10:40:06.443] No splash screen [2025-09-24 10:40:06.443] stop dss Done [2025-09-24 10:40:06.459] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:40:06.475] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:40:06.491] /dev/mem opened. [2025-09-24 10:40:06.523] Memory mapped at address 0xffff85d55000. [2025-09-24 10:40:06.523] Read at address 0x00600018 (0xffff85d55018): 0x00000000 [2025-09-24 10:40:06.523] Write at address 0x00600018 (0xffff85d55018): 0x00400040, readback 0x00400040 [2025-09-24 10:40:06.634] Loaded PowerVR consumer services. [2025-09-24 10:40:06.746] 512+0 records in [2025-09-24 10:40:06.762] 512+0 records out [2025-09-24 10:40:06.762] Waiting data available... [2025-09-24 10:40:06.794] Starting syslogd/klogd: done [2025-09-24 10:40:06.810] DML Start [2025-09-24 10:40:07.018] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:40:07.242] DML res1: 0 [2025-09-24 10:40:07.658] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:40:07.674] Read Success [2025-09-24 10:40:07.674] Verifying certificate... [2025-09-24 10:40:07.914] Verified OK [2025-09-24 10:40:07.930] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:40:09.689] Verified OK [2025-09-24 10:40:09.689] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:40:10.313] Verified OK [2025-09-24 10:40:10.313] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:40:12.871] fs.protected_hardlinks = 1 [2025-09-24 10:40:12.887] fs.protected_symlinks = 1 [2025-09-24 10:40:12.887] kernel.modules_disabled = 1 [2025-09-24 10:40:13.079] [2025-09-24 10:40:13.079] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:40:14.320] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:40:22.022] SBL1:1210.0.1.0 [2025-09-24 10:40:22.070] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:40:23.637] SBL2:1210.0.1.0 [2025-09-24 10:40:23.685] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:40:23.780] j-A [2025-09-24 10:40:31.136] The R5 Autosar Classic is running [2025-09-24 10:40:31.160] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:40:31.160] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:40:31.767] INIT: version 2.96 booting [2025-09-24 10:40:31.879] INIT: Entering runlevel: 5 [2025-09-24 10:40:32.023] mtd24 attached [2025-09-24 10:40:32.039] mtd28 attached [2025-09-24 10:40:32.055] mtd32 attached [2025-09-24 10:40:32.087] ubi0:textures is mounted. [2025-09-24 10:40:32.160] RTNETLINK answers: File exists [2025-09-24 10:40:32.160] ubi1:animations is mounted. [2025-09-24 10:40:32.160] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:40:32.160] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:40:32.160] ubi2:dml_code is mounted. [2025-09-24 10:40:32.160] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:40:32.160] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:40:32.160] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:40:32.160] data.LB_FadeInType0=100 [2025-09-24 10:40:32.160] data.CHLH_FadeInType0=0 [2025-09-24 10:40:32.160] data.WU_FadeInDelay=0 [2025-09-24 10:40:32.160] max_time_out=0 [2025-09-24 10:40:32.160] No splash screen [2025-09-24 10:40:32.160] stop dss Done [2025-09-24 10:40:32.239] /dev/mem opened. [2025-09-24 10:40:32.239] Memory mapped at address 0xffff7ffdd000. [2025-09-24 10:40:32.239] Read at address 0x00600018 (0xffff7ffdd018): 0x00000000 [2025-09-24 10:40:32.239] Write at address 0x00600018 (0xffff7ffdd018): 0x00400040, readback 0x00400040 [2025-09-24 10:40:32.239] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:40:32.239] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:40:32.334] Loaded PowerVR consumer services. [2025-09-24 10:40:32.462] 512+0 records in [2025-09-24 10:40:32.462] 512+0 records out [2025-09-24 10:40:32.494] Waiting data available... [2025-09-24 10:40:32.509] Starting syslogd/klogd: done [2025-09-24 10:40:32.526] DML Start [2025-09-24 10:40:32.702] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:40:32.942] DML res1: 0 [2025-09-24 10:40:33.369] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:40:33.369] Read Success [2025-09-24 10:40:33.369] Verifying certificate... [2025-09-24 10:40:33.641] Verified OK [2025-09-24 10:40:33.657] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:40:35.176] Verified OK [2025-09-24 10:40:35.176] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:40:35.825] Verified OK [2025-09-24 10:40:35.825] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:40:38.575] fs.protected_hardlinks = 1 [2025-09-24 10:40:38.591] fs.protected_symlinks = 1 [2025-09-24 10:40:38.591] kernel.modules_disabled = 1 [2025-09-24 10:40:38.783] [2025-09-24 10:40:38.783] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:40:40.023] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:40:47.730] SBL1:1210.0.1.0 [2025-09-24 10:40:47.778] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:40:49.344] SBL2:1210.0.1.0 [2025-09-24 10:40:49.376] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 10:40:49.488] j-A [2025-09-24 10:40:56.862] The R5 Autosar Classic is running [2025-09-24 10:40:56.862] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:40:56.862] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:40:57.470] INIT: version 2.96 booting [2025-09-24 10:40:57.581] INIT: Entering runlevel: 5 [2025-09-24 10:40:57.742] mtd28 attached [2025-09-24 10:40:57.757] mtd32 attached [2025-09-24 10:40:57.757] mtd24 attached [2025-09-24 10:40:57.805] ubi0:animations is mounted. [2025-09-24 10:40:57.867] ubi1:dml_code is mounted. [2025-09-24 10:40:57.867] RTNETLINK answers: File exists [2025-09-24 10:40:57.867] ubi2:textures is mounted. [2025-09-24 10:40:57.867] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:40:57.867] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:40:57.867] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:40:57.867] data.LB_FadeInType0=100 [2025-09-24 10:40:57.867] data.CHLH_FadeInType0=0 [2025-09-24 10:40:57.867] data.WU_FadeInDelay=0 [2025-09-24 10:40:57.867] max_time_out=0 [2025-09-24 10:40:57.867] No splash screen [2025-09-24 10:40:57.867] stop dss Done [2025-09-24 10:40:57.867] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:40:57.867] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:40:57.937] /dev/mem opened. [2025-09-24 10:40:57.937] Memory mapped at address 0xffffb4c43000. [2025-09-24 10:40:57.937] Read at address 0x00600018 (0xffffb4c43018): 0x00000000 [2025-09-24 10:40:57.937] Write at address 0x00600018 (0xffffb4c43018): 0x00400040, readback 0x00400040 [2025-09-24 10:40:57.953] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:40:57.968] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:40:58.112] Loaded PowerVR consumer services. [2025-09-24 10:40:58.193] Waiting data available... [2025-09-24 10:40:58.208] 512+0 records in [2025-09-24 10:40:58.208] 512+0 records out [2025-09-24 10:40:58.240] Starting syslogd/klogd: done [2025-09-24 10:40:58.256] DML Start [2025-09-24 10:40:58.432] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:40:58.688] DML res1: 0 [2025-09-24 10:40:59.072] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:40:59.093] Read Success [2025-09-24 10:40:59.093] Verifying certificate... [2025-09-24 10:40:59.333] Verified OK [2025-09-24 10:40:59.349] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:41:00.929] Verified OK [2025-09-24 10:41:00.929] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:41:01.483] Verified OK [2025-09-24 10:41:01.483] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:41:04.201] fs.protected_hardlinks = 1 [2025-09-24 10:41:04.217] fs.protected_symlinks = 1 [2025-09-24 10:41:04.217] kernel.modules_disabled = 1 [2025-09-24 10:41:04.409] [2025-09-24 10:41:04.409] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:41:05.753] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:41:13.432] SBL1:1210.0.1.0 [2025-09-24 10:41:13.480] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:41:15.047] SBL2:1210.0.1.0 [2025-09-24 10:41:15.078] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:41:15.190] j-A [2025-09-24 10:41:22.563] The R5 Autosar Classic is running [2025-09-24 10:41:22.563] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:41:22.563] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:41:23.171] INIT: version 2.96 booting [2025-09-24 10:41:23.282] INIT: Entering runlevel: 5 [2025-09-24 10:41:23.426] mtd24 attached [2025-09-24 10:41:23.443] mtd28 attached [2025-09-24 10:41:23.475] mtd32 attached [2025-09-24 10:41:23.491] ubi0:textures is mounted. [2025-09-24 10:41:23.507] ubi1:animations is mounted. [2025-09-24 10:41:23.567] RTNETLINK answers: File exists [2025-09-24 10:41:23.567] ubi2:dml_code is mounted. [2025-09-24 10:41:23.567] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:41:23.567] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:41:23.567] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:41:23.567] data.LB_FadeInType0=100 [2025-09-24 10:41:23.567] data.CHLH_FadeInType0=0 [2025-09-24 10:41:23.567] data.WU_FadeInDelay=0 [2025-09-24 10:41:23.567] max_time_out=0 [2025-09-24 10:41:23.567] No splash screen [2025-09-24 10:41:23.567] stop dss Done [2025-09-24 10:41:23.567] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:41:23.567] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:41:23.626] /dev/mem opened. [2025-09-24 10:41:23.626] Memory mapped at address 0xffff8ccb3000. [2025-09-24 10:41:23.626] Read at address 0x00600018 (0xffff8ccb3018): 0x00000000 [2025-09-24 10:41:23.626] Write at address 0x00600018 (0xffff8ccb3018): 0x00400040, readback 0x00400040 [2025-09-24 10:41:23.626] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:41:23.626] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:41:23.866] Loaded PowerVR consumer services. [2025-09-24 10:41:23.882] Waiting data available... [2025-09-24 10:41:23.898] 512+0 records in [2025-09-24 10:41:23.898] 512+0 records out [2025-09-24 10:41:23.946] Starting syslogd/klogd: done [2025-09-24 10:41:23.962] DML Start [2025-09-24 10:41:24.170] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:41:24.345] DML res1: 0 [2025-09-24 10:41:24.822] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:41:24.822] Read Success [2025-09-24 10:41:24.822] Verifying certificate... [2025-09-24 10:41:25.046] Verified OK [2025-09-24 10:41:25.062] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:41:26.670] Verified OK [2025-09-24 10:41:26.670] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:41:27.294] Verified OK [2025-09-24 10:41:27.294] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:41:30.060] fs.protected_hardlinks = 1 [2025-09-24 10:41:30.060] fs.protected_symlinks = 1 [2025-09-24 10:41:30.076] kernel.modules_disabled = 1 [2025-09-24 10:41:30.268] [2025-09-24 10:41:30.268] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:41:31.451] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:41:39.162] SBL1:1210.0.1.0 [2025-09-24 10:41:39.194] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:41:40.777] SBL2:1210.0.1.0 [2025-09-24 10:41:40.809] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:41:40.922] j-A [2025-09-24 10:41:48.260] The R5 Autosar Classic is running [2025-09-24 10:41:48.291] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:41:48.291] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:41:48.899] INIT: version 2.96 booting [2025-09-24 10:41:49.011] INIT: Entering runlevel: 5 [2025-09-24 10:41:49.155] mtd28 attached [2025-09-24 10:41:49.171] mtd32 attached [2025-09-24 10:41:49.187] mtd24 attached [2025-09-24 10:41:49.203] ubi0:animations is mounted. [2025-09-24 10:41:49.235] RTNETLINK answers: File exists [2025-09-24 10:41:49.235] ubi1:dml_code is mounted. [2025-09-24 10:41:49.289] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:41:49.289] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:41:49.289] ubi2:textures is mounted. [2025-09-24 10:41:49.289] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:41:49.289] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:41:49.289] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:41:49.289] data.LB_FadeInType0=100 [2025-09-24 10:41:49.289] data.CHLH_FadeInType0=0 [2025-09-24 10:41:49.289] data.WU_FadeInDelay=0 [2025-09-24 10:41:49.289] max_time_out=0 [2025-09-24 10:41:49.289] No splash screen [2025-09-24 10:41:49.289] stop dss Done [2025-09-24 10:41:49.373] /dev/mem opened. [2025-09-24 10:41:49.373] Memory mapped at address 0xffff9d578000. [2025-09-24 10:41:49.373] Read at address 0x00600018 (0xffff9d578018): 0x00000000 [2025-09-24 10:41:49.373] Write at address 0x00600018 (0xffff9d578018): 0x00400040, readback 0x00400040 [2025-09-24 10:41:49.373] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:41:49.389] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:41:49.565] Loaded PowerVR consumer services. [2025-09-24 10:41:49.597] Waiting data available... [2025-09-24 10:41:49.614] 512+0 records in [2025-09-24 10:41:49.614] 512+0 records out [2025-09-24 10:41:49.646] Starting syslogd/klogd: done [2025-09-24 10:41:49.662] DML Start [2025-09-24 10:41:49.837] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:41:50.061] DML res1: 0 [2025-09-24 10:41:50.504] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:41:50.504] Read Success [2025-09-24 10:41:50.504] Verifying certificate... [2025-09-24 10:41:50.743] Verified OK [2025-09-24 10:41:50.759] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:41:52.557] Verified OK [2025-09-24 10:41:52.557] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:41:53.149] Verified OK [2025-09-24 10:41:53.149] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:41:55.755] fs.protected_hardlinks = 1 [2025-09-24 10:41:55.770] fs.protected_symlinks = 1 [2025-09-24 10:41:55.770] kernel.modules_disabled = 1 [2025-09-24 10:41:55.963] [2025-09-24 10:41:55.963] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:41:57.155] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:42:04.890] SBL1:1210.0.1.0 [2025-09-24 10:42:04.922] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:42:06.505] SBL2:1210.0.1.0 [2025-09-24 10:42:06.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:42:06.649] j-A [2025-09-24 10:42:13.989] The R5 Autosar Classic is running [2025-09-24 10:42:14.020] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:42:14.020] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:42:14.628] INIT: version 2.96 booting [2025-09-24 10:42:14.740] INIT: Entering runlevel: 5 [2025-09-24 10:42:14.900] mtd28 attached [2025-09-24 10:42:14.900] mtd24 attached [2025-09-24 10:42:14.931] mtd32 attached [2025-09-24 10:42:14.963] ubi0:animations is mounted. [2025-09-24 10:42:15.031] RTNETLINK answers: File exists [2025-09-24 10:42:15.031] ubi1:textures is mounted. [2025-09-24 10:42:15.031] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:42:15.031] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:42:15.031] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:42:15.031] ubi2:dml_code is mounted. [2025-09-24 10:42:15.031] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:42:15.031] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:42:15.031] data.LB_FadeInType0=100 [2025-09-24 10:42:15.031] data.CHLH_FadeInType0=0 [2025-09-24 10:42:15.031] data.WU_FadeInDelay=0 [2025-09-24 10:42:15.031] max_time_out=0 [2025-09-24 10:42:15.031] No splash screen [2025-09-24 10:42:15.031] stop dss Done [2025-09-24 10:42:15.063] /dev/mem opened. [2025-09-24 10:42:15.063] Memory mapped at address 0xffff993d9000. [2025-09-24 10:42:15.099] Read at address 0x00600018 (0xffff993d9018): 0x00000000 [2025-09-24 10:42:15.099] Write at address 0x00600018 (0xffff993d9018): 0x00400040, readback 0x00400040 [2025-09-24 10:42:15.099] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:42:15.115] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:42:15.324] Loaded PowerVR consumer services. [2025-09-24 10:42:15.369] 512+0 records in [2025-09-24 10:42:15.369] 512+0 records out [2025-09-24 10:42:15.369] Waiting data available... [2025-09-24 10:42:15.401] Starting syslogd/klogd: done [2025-09-24 10:42:15.417] DML Start [2025-09-24 10:42:15.577] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:42:15.753] DML res1: 0 [2025-09-24 10:42:16.274] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:42:16.274] Read Success [2025-09-24 10:42:16.274] Verifying certificate... [2025-09-24 10:42:16.498] Verified OK [2025-09-24 10:42:16.514] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:42:18.198] Verified OK [2025-09-24 10:42:18.198] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:42:18.774] Verified OK [2025-09-24 10:42:18.774] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:42:21.426] fs.protected_hardlinks = 1 [2025-09-24 10:42:21.426] fs.protected_symlinks = 1 [2025-09-24 10:42:21.426] kernel.modules_disabled = 1 [2025-09-24 10:42:21.617] [2025-09-24 10:42:21.617] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:42:22.881] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:42:30.611] SBL1:1210.0.1.0 [2025-09-24 10:42:30.643] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:42:32.226] SBL2:1210.0.1.0 [2025-09-24 10:42:32.258] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:42:32.354] j-A [2025-09-24 10:42:39.711] The R5 Autosar Classic is running [2025-09-24 10:42:39.734] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:42:39.734] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:42:40.342] INIT: version 2.96 booting [2025-09-24 10:42:40.454] INIT: Entering runlevel: 5 [2025-09-24 10:42:40.614] mtd24 attached [2025-09-24 10:42:40.630] mtd32 attached [2025-09-24 10:42:40.630] mtd28 attached [2025-09-24 10:42:40.678] ubi0:textures is mounted. [2025-09-24 10:42:40.678] RTNETLINK answers: File exists [2025-09-24 10:42:40.739] ubi2:animations is mounted. [2025-09-24 10:42:40.739] ubi1:dml_code is mounted. [2025-09-24 10:42:40.739] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:42:40.739] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:42:40.739] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:42:40.739] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:42:40.739] data.LB_FadeInType0=100 [2025-09-24 10:42:40.739] data.CHLH_FadeInType0=0 [2025-09-24 10:42:40.739] data.WU_FadeInDelay=0 [2025-09-24 10:42:40.739] max_time_out=0 [2025-09-24 10:42:40.739] No splash screen [2025-09-24 10:42:40.739] stop dss Done [2025-09-24 10:42:40.739] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:42:40.804] /dev/mem opened. [2025-09-24 10:42:40.804] Memory mapped at address 0xffff81ecc000. [2025-09-24 10:42:40.804] Read at address 0x00600018 (0xffff81ecc018): 0x00000000 [2025-09-24 10:42:40.804] Write at address 0x00600018 (0xffff81ecc018): 0x00400040, readback 0x00400040 [2025-09-24 10:42:40.836] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:42:40.852] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:42:41.012] Loaded PowerVR consumer services. [2025-09-24 10:42:41.091] 512+0 records in [2025-09-24 10:42:41.091] 512+0 records out [2025-09-24 10:42:41.091] Waiting data available... [2025-09-24 10:42:41.122] Starting syslogd/klogd: done [2025-09-24 10:42:41.138] DML Start [2025-09-24 10:42:41.299] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:42:41.570] DML res1: 0 [2025-09-24 10:42:41.969] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:42:41.986] Read Success [2025-09-24 10:42:41.986] Verifying certificate... [2025-09-24 10:42:42.242] Verified OK [2025-09-24 10:42:42.258] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:42:44.026] Verified OK [2025-09-24 10:42:44.026] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:42:44.590] Verified OK [2025-09-24 10:42:44.590] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:42:47.020] fs.protected_hardlinks = 1 [2025-09-24 10:42:47.047] fs.protected_symlinks = 1 [2025-09-24 10:42:47.047] kernel.modules_disabled = 1 [2025-09-24 10:42:47.223] [2025-09-24 10:42:47.223] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:42:48.655] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:42:56.332] SBL1:1210.0.1.0 [2025-09-24 10:42:56.379] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:42:57.947] SBL2:1210.0.1.0 [2025-09-24 10:42:57.995] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:42:58.091] j-A [2025-09-24 10:43:05.447] The R5 Autosar Classic is running [2025-09-24 10:43:05.469] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:43:05.469] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:43:06.076] INIT: version 2.96 booting [2025-09-24 10:43:06.188] INIT: Entering runlevel: 5 [2025-09-24 10:43:06.348] mtd24 attached [2025-09-24 10:43:06.348] mtd28 attached [2025-09-24 10:43:06.363] mtd32 attached [2025-09-24 10:43:06.412] ubi0:textures is mounted. [2025-09-24 10:43:06.479] RTNETLINK answers: File exists [2025-09-24 10:43:06.479] ubi1:animations is mounted. [2025-09-24 10:43:06.479] ubi2:dml_code is mounted. [2025-09-24 10:43:06.479] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:43:06.479] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:43:06.479] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:43:06.479] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:43:06.479] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:43:06.479] data.LB_FadeInType0=100 [2025-09-24 10:43:06.479] data.CHLH_FadeInType0=0 [2025-09-24 10:43:06.479] data.WU_FadeInDelay=0 [2025-09-24 10:43:06.479] max_time_out=0 [2025-09-24 10:43:06.479] No splash screen [2025-09-24 10:43:06.479] stop dss Done [2025-09-24 10:43:06.511] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:43:06.548] /dev/mem opened. [2025-09-24 10:43:06.548] Memory mapped at address 0xffffb04d9000. [2025-09-24 10:43:06.548] Read at address 0x00600018 (0xffffb04d9018): 0x00000000 [2025-09-24 10:43:06.548] Write at address 0x00600018 (0xffffb04d9018): 0x00400040, readback 0x00400040 [2025-09-24 10:43:06.548] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:43:06.772] Loaded PowerVR consumer services. [2025-09-24 10:43:06.788] Waiting data available... [2025-09-24 10:43:06.805] 512+0 records in [2025-09-24 10:43:06.805] 512+0 records out [2025-09-24 10:43:06.837] Starting syslogd/klogd: done [2025-09-24 10:43:06.869] DML Start [2025-09-24 10:43:07.012] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:43:07.204] DML res1: 0 [2025-09-24 10:43:07.730] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:43:07.730] Read Success [2025-09-24 10:43:07.730] Verifying certificate... [2025-09-24 10:43:08.001] Verified OK [2025-09-24 10:43:08.017] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:43:09.617] Verified OK [2025-09-24 10:43:09.633] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:43:10.240] Verified OK [2025-09-24 10:43:10.240] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:43:12.895] fs.protected_hardlinks = 1 [2025-09-24 10:43:12.924] fs.protected_symlinks = 1 [2025-09-24 10:43:12.924] kernel.modules_disabled = 1 [2025-09-24 10:43:13.099] [2025-09-24 10:43:13.099] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:43:14.328] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:43:22.033] SBL1:1210.0.1.0 [2025-09-24 10:43:22.064] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:43:23.648] SBL2:1210.0.1.0 [2025-09-24 10:43:23.680] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:43:23.792] j-A [2025-09-24 10:43:31.164] The R5 Autosar Classic is running [2025-09-24 10:43:31.164] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:43:31.164] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:43:31.771] INIT: version 2.96 booting [2025-09-24 10:43:31.884] INIT: Entering runlevel: 5 [2025-09-24 10:43:32.043] mtd24 attached [2025-09-24 10:43:32.043] mtd28 attached [2025-09-24 10:43:32.059] mtd32 attached [2025-09-24 10:43:32.107] RTNETLINK answers: File exists [2025-09-24 10:43:32.143] ubi0:textures is mounted. [2025-09-24 10:43:32.143] ubi1:animations is mounted. [2025-09-24 10:43:32.143] ubi2:dml_code is mounted. [2025-09-24 10:43:32.143] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:43:32.143] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:43:32.143] data.LB_FadeInType0=100 [2025-09-24 10:43:32.179] data.CHLH_FadeInType0=0 [2025-09-24 10:43:32.179] data.WU_FadeInDelay=0 [2025-09-24 10:43:32.179] max_time_out=0 [2025-09-24 10:43:32.179] No splash screen [2025-09-24 10:43:32.179] stop dss Done [2025-09-24 10:43:32.179] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:43:32.179] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:43:32.179] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:43:32.268] /dev/mem opened. [2025-09-24 10:43:32.268] Memory mapped at address 0xffffb168b000. [2025-09-24 10:43:32.268] Read at address 0x00600018 (0xffffb168b018): 0x00000000 [2025-09-24 10:43:32.268] Write at address 0x00600018 (0xffffb168b018): 0x00400040, readback 0x00400040 [2025-09-24 10:43:32.268] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:43:32.268] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:43:32.332] Loaded PowerVR consumer services. [2025-09-24 10:43:32.476] 512+0 records in [2025-09-24 10:43:32.476] 512+0 records out [2025-09-24 10:43:32.508] Waiting data available... [2025-09-24 10:43:32.524] Starting syslogd/klogd: done [2025-09-24 10:43:32.539] DML Start [2025-09-24 10:43:32.748] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:43:32.971] DML res1: 0 [2025-09-24 10:43:33.364] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:43:33.364] Read Success [2025-09-24 10:43:33.364] Verifying certificate... [2025-09-24 10:43:33.604] Verified OK [2025-09-24 10:43:33.620] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:43:35.187] Verified OK [2025-09-24 10:43:35.187] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:43:35.888] Verified OK [2025-09-24 10:43:35.888] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:43:38.574] fs.protected_hardlinks = 1 [2025-09-24 10:43:38.601] fs.protected_symlinks = 1 [2025-09-24 10:43:38.601] kernel.modules_disabled = 1 [2025-09-24 10:43:38.793] [2025-09-24 10:43:38.793] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:43:40.066] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:43:47.769] SBL1:1210.0.1.0 [2025-09-24 10:43:47.800] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:43:49.384] SBL2:1210.0.1.0 [2025-09-24 10:43:49.415] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:43:49.511] j-A [2025-09-24 10:43:56.868] The R5 Autosar Classic is running [2025-09-24 10:43:56.893] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:43:56.893] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:43:57.500] INIT: version 2.96 booting [2025-09-24 10:43:57.612] INIT: Entering runlevel: 5 [2025-09-24 10:43:57.772] mtd28 attached [2025-09-24 10:43:57.772] mtd32 attached [2025-09-24 10:43:57.788] mtd24 attached [2025-09-24 10:43:57.836] ubi0:animations is mounted. [2025-09-24 10:43:57.836] RTNETLINK answers: File exists [2025-09-24 10:43:57.895] ubi2:textures is mounted. [2025-09-24 10:43:57.895] ubi1:dml_code is mounted. [2025-09-24 10:43:57.895] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:43:57.895] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:43:57.895] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:43:57.895] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:43:57.895] data.LB_FadeInType0=100 [2025-09-24 10:43:57.895] data.CHLH_FadeInType0=0 [2025-09-24 10:43:57.895] data.WU_FadeInDelay=0 [2025-09-24 10:43:57.895] max_time_out=0 [2025-09-24 10:43:57.895] No splash screen [2025-09-24 10:43:57.895] stop dss Done [2025-09-24 10:43:57.895] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:43:57.976] /dev/mem opened. [2025-09-24 10:43:57.976] Memory mapped at address 0xffff9287f000. [2025-09-24 10:43:57.976] Read at address 0x00600018 (0xffff9287f018): 0x00000000 [2025-09-24 10:43:57.976] Write at address 0x00600018 (0xffff9287f018): 0x00400040, readback 0x00400040 [2025-09-24 10:43:57.976] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:43:57.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:43:58.104] Loaded PowerVR consumer services. [2025-09-24 10:43:58.229] 512+0 records in [2025-09-24 10:43:58.229] 512+0 records out [2025-09-24 10:43:58.229] Waiting data available... [2025-09-24 10:43:58.245] Starting syslogd/klogd: done [2025-09-24 10:43:58.261] DML Start [2025-09-24 10:43:58.438] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:43:58.678] DML res1: 0 [2025-09-24 10:43:59.107] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:43:59.107] Read Success [2025-09-24 10:43:59.107] Verifying certificate... [2025-09-24 10:43:59.363] Verified OK [2025-09-24 10:43:59.379] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:44:01.058] Verified OK [2025-09-24 10:44:01.058] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:44:01.673] Verified OK [2025-09-24 10:44:01.673] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:44:04.279] fs.protected_hardlinks = 1 [2025-09-24 10:44:04.279] fs.protected_symlinks = 1 [2025-09-24 10:44:04.295] kernel.modules_disabled = 1 [2025-09-24 10:44:04.471] [2025-09-24 10:44:04.471] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:44:05.761] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:44:13.489] SBL1:1210.0.1.0 [2025-09-24 10:44:13.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:44:15.103] SBL2:1210.0.1.0 [2025-09-24 10:44:15.151] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:44:15.248] j-A [2025-09-24 10:44:22.604] The R5 Autosar Classic is running [2025-09-24 10:44:22.604] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:44:22.624] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:44:23.232] INIT: version 2.96 booting [2025-09-24 10:44:23.345] INIT: Entering runlevel: 5 [2025-09-24 10:44:23.488] mtd24 attached [2025-09-24 10:44:23.504] mtd32 attached [2025-09-24 10:44:23.520] mtd28 attached [2025-09-24 10:44:23.552] ubi0:textures is mounted. [2025-09-24 10:44:23.568] ubi1:dml_code is mounted. [2025-09-24 10:44:23.568] RTNETLINK answers: File exists [2025-09-24 10:44:23.628] ubi2:animations is mounted. [2025-09-24 10:44:23.628] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:44:23.628] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:44:23.628] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:44:23.628] data.LB_FadeInType0=100 [2025-09-24 10:44:23.628] data.CHLH_FadeInType0=0 [2025-09-24 10:44:23.628] data.WU_FadeInDelay=0 [2025-09-24 10:44:23.628] max_time_out=0 [2025-09-24 10:44:23.628] No splash screen [2025-09-24 10:44:23.628] stop dss Done [2025-09-24 10:44:23.628] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:44:23.628] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:44:23.695] /dev/mem opened. [2025-09-24 10:44:23.695] Memory mapped at address 0xffffa9670000. [2025-09-24 10:44:23.695] Read at address 0x00600018 (0xffffa9670018): 0x00000000 [2025-09-24 10:44:23.695] Write at address 0x00600018 (0xffffa9670018): 0x00400040, readback 0x00400040 [2025-09-24 10:44:23.742] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:44:23.742] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:44:23.870] Loaded PowerVR consumer services. [2025-09-24 10:44:23.949] 512+0 records in [2025-09-24 10:44:23.965] 512+0 records out [2025-09-24 10:44:23.965] Waiting data available... [2025-09-24 10:44:23.997] Starting syslogd/klogd: done [2025-09-24 10:44:24.013] DML Start [2025-09-24 10:44:24.206] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:44:24.397] DML res1: 0 [2025-09-24 10:44:24.891] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:44:24.891] Read Success [2025-09-24 10:44:24.891] Verifying certificate... [2025-09-24 10:44:25.162] Verified OK [2025-09-24 10:44:25.162] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:44:26.729] Verified OK [2025-09-24 10:44:26.729] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:44:27.353] Verified OK [2025-09-24 10:44:27.374] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:44:30.060] fs.protected_hardlinks = 1 [2025-09-24 10:44:30.060] fs.protected_symlinks = 1 [2025-09-24 10:44:30.077] kernel.modules_disabled = 1 [2025-09-24 10:44:30.268] [2025-09-24 10:44:30.268] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:44:31.511] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:44:39.187] SBL1:1210.0.1.0 [2025-09-24 10:44:39.235] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:44:40.801] SBL2:1210.0.1.0 [2025-09-24 10:44:40.849] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:44:40.946] j-A [2025-09-24 10:44:48.301] The R5 Autosar Classic is running [2025-09-24 10:44:48.323] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:44:48.323] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:44:48.931] INIT: version 2.96 booting [2025-09-24 10:44:49.043] INIT: Entering runlevel: 5 [2025-09-24 10:44:49.203] mtd28 attached [2025-09-24 10:44:49.219] mtd24 attached [2025-09-24 10:44:49.235] mtd32 attached [2025-09-24 10:44:49.267] ubi0:animations is mounted. [2025-09-24 10:44:49.267] RTNETLINK answers: File exists [2025-09-24 10:44:49.310] ubi1:textures is mounted. [2025-09-24 10:44:49.310] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:44:49.310] ubi2:dml_code is mounted. [2025-09-24 10:44:49.310] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:44:49.310] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:44:49.310] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:44:49.310] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:44:49.331] data.LB_FadeInType0=100 [2025-09-24 10:44:49.331] data.CHLH_FadeInType0=0 [2025-09-24 10:44:49.331] data.WU_FadeInDelay=0 [2025-09-24 10:44:49.331] max_time_out=0 [2025-09-24 10:44:49.331] No splash screen [2025-09-24 10:44:49.331] stop dss Done [2025-09-24 10:44:49.398] /dev/mem opened. [2025-09-24 10:44:49.398] Memory mapped at address 0xffffb5286000. [2025-09-24 10:44:49.398] Read at address 0x00600018 (0xffffb5286018): 0x00000000 [2025-09-24 10:44:49.398] Write at address 0x00600018 (0xffffb5286018): 0x00400040, readback 0x00400040 [2025-09-24 10:44:49.414] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:44:49.446] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:44:49.526] Loaded PowerVR consumer services. [2025-09-24 10:44:49.654] Waiting data available... [2025-09-24 10:44:49.654] 512+0 records in [2025-09-24 10:44:49.654] 512+0 records out [2025-09-24 10:44:49.702] Starting syslogd/klogd: done [2025-09-24 10:44:49.718] DML Start [2025-09-24 10:44:49.911] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:44:50.086] DML res1: 0 [2025-09-24 10:44:50.559] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:44:50.559] Read Success [2025-09-24 10:44:50.559] Verifying certificate... [2025-09-24 10:44:50.799] Verified OK [2025-09-24 10:44:50.815] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:44:52.488] Verified OK [2025-09-24 10:44:52.488] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:44:53.096] Verified OK [2025-09-24 10:44:53.096] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:44:55.734] fs.protected_hardlinks = 1 [2025-09-24 10:44:55.734] fs.protected_symlinks = 1 [2025-09-24 10:44:55.750] kernel.modules_disabled = 1 [2025-09-24 10:44:55.942] [2025-09-24 10:44:55.942] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:44:57.222] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:45:04.900] SBL1:1210.0.1.0 [2025-09-24 10:45:04.948] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:45:06.515] SBL2:1210.0.1.0 [2025-09-24 10:45:06.547] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:45:06.659] j-A [2025-09-24 10:45:14.014] The R5 Autosar Classic is running [2025-09-24 10:45:14.014] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:45:14.035] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:45:14.642] INIT: version 2.96 booting [2025-09-24 10:45:14.755] INIT: Entering runlevel: 5 [2025-09-24 10:45:14.898] mtd24 attached [2025-09-24 10:45:14.914] mtd28 attached [2025-09-24 10:45:14.930] mtd32 attached [2025-09-24 10:45:14.946] ubi0:textures is mounted. [2025-09-24 10:45:15.013] RTNETLINK answers: File exists [2025-09-24 10:45:15.013] ubi1:animations is mounted. [2025-09-24 10:45:15.013] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:45:15.013] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:45:15.013] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:45:15.013] ubi2:dml_code is mounted. [2025-09-24 10:45:15.013] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:45:15.013] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:45:15.037] data.LB_FadeInType0=100 [2025-09-24 10:45:15.037] data.CHLH_FadeInType0=0 [2025-09-24 10:45:15.037] data.WU_FadeInDelay=0 [2025-09-24 10:45:15.037] max_time_out=0 [2025-09-24 10:45:15.037] No splash screen [2025-09-24 10:45:15.037] stop dss Done [2025-09-24 10:45:15.053] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:45:15.069] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:45:15.104] /dev/mem opened. [2025-09-24 10:45:15.104] Memory mapped at address 0xffff8c032000. [2025-09-24 10:45:15.104] Read at address 0x00600018 (0xffff8c032018): 0x00000000 [2025-09-24 10:45:15.104] Write at address 0x00600018 (0xffff8c032018): 0x00400040, readback 0x00400040 [2025-09-24 10:45:15.200] Loaded PowerVR consumer services. [2025-09-24 10:45:15.356] 512+0 records in [2025-09-24 10:45:15.356] 512+0 records out [2025-09-24 10:45:15.356] Waiting data available... [2025-09-24 10:45:15.372] Starting syslogd/klogd: done [2025-09-24 10:45:15.388] DML Start [2025-09-24 10:45:15.596] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:45:15.835] DML res1: 0 [2025-09-24 10:45:16.213] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:45:16.213] Read Success [2025-09-24 10:45:16.213] Verifying certificate... [2025-09-24 10:45:16.468] Verified OK [2025-09-24 10:45:16.484] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:45:18.222] Verified OK [2025-09-24 10:45:18.222] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:45:18.814] Verified OK [2025-09-24 10:45:18.814] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:45:21.549] fs.protected_hardlinks = 1 [2025-09-24 10:45:21.565] fs.protected_symlinks = 1 [2025-09-24 10:45:21.565] kernel.modules_disabled = 1 [2025-09-24 10:45:21.756] [2025-09-24 10:45:21.756] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:45:22.881] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:45:30.605] SBL1:1210.0.1.0 [2025-09-24 10:45:30.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:45:32.219] SBL2:1210.0.1.0 [2025-09-24 10:45:32.251] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:45:32.363] j-A [2025-09-24 10:45:39.737] The R5 Autosar Classic is running [2025-09-24 10:45:39.737] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:45:39.737] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:45:40.345] INIT: version 2.96 booting [2025-09-24 10:45:40.456] INIT: Entering runlevel: 5 [2025-09-24 10:45:40.600] mtd24 attached [2025-09-24 10:45:40.616] mtd32 attached [2025-09-24 10:45:40.633] mtd28 attached [2025-09-24 10:45:40.681] ubi0:textures is mounted. [2025-09-24 10:45:40.681] RTNETLINK answers: File exists [2025-09-24 10:45:40.739] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:45:40.739] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:45:40.739] ubi2:animations is mounted. [2025-09-24 10:45:40.739] ubi1:dml_code is mounted. [2025-09-24 10:45:40.739] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:45:40.739] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:45:40.739] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:45:40.739] data.LB_FadeInType0=100 [2025-09-24 10:45:40.739] data.CHLH_FadeInType0=0 [2025-09-24 10:45:40.739] data.WU_FadeInDelay=0 [2025-09-24 10:45:40.739] max_time_out=0 [2025-09-24 10:45:40.739] No splash screen [2025-09-24 10:45:40.739] stop dss Done [2025-09-24 10:45:40.787] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:45:40.819] /dev/mem opened. [2025-09-24 10:45:40.819] Memory mapped at address 0xffff7f98e000. [2025-09-24 10:45:40.819] Read at address 0x00600018 (0xffff7f98e018): 0x00000000 [2025-09-24 10:45:40.819] Write at address 0x00600018 (0xffff7f98e018): 0x00400040, readback 0x00400040 [2025-09-24 10:45:40.819] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:45:40.931] Loaded PowerVR consumer services. [2025-09-24 10:45:41.044] 512+0 records in [2025-09-24 10:45:41.044] 512+0 records out [2025-09-24 10:45:41.092] Waiting data available... [2025-09-24 10:45:41.092] Starting syslogd/klogd: done [2025-09-24 10:45:41.108] DML Start [2025-09-24 10:45:41.251] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:45:41.523] DML res1: 0 [2025-09-24 10:45:41.963] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:45:41.963] Read Success [2025-09-24 10:45:41.963] Verifying certificate... [2025-09-24 10:45:42.187] Verified OK [2025-09-24 10:45:42.203] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:45:43.847] Verified OK [2025-09-24 10:45:43.847] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:45:44.463] Verified OK [2025-09-24 10:45:44.463] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:45:47.006] fs.protected_hardlinks = 1 [2025-09-24 10:45:47.006] fs.protected_symlinks = 1 [2025-09-24 10:45:47.022] kernel.modules_disabled = 1 [2025-09-24 10:45:47.214] [2025-09-24 10:45:47.214] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:45:48.587] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:45:56.309] SBL1:1210.0.1.0 [2025-09-24 10:45:56.357] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:45:57.924] SBL2:1210.0.1.0 [2025-09-24 10:45:57.957] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:45:58.068] j-A [2025-09-24 10:46:05.423] The R5 Autosar Classic is running [2025-09-24 10:46:05.423] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:46:05.444] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:46:06.051] INIT: version 2.96 booting [2025-09-24 10:46:06.164] INIT: Entering runlevel: 5 [2025-09-24 10:46:06.323] mtd28 attached [2025-09-24 10:46:06.339] mtd32 attached [2025-09-24 10:46:06.339] mtd24 attached [2025-09-24 10:46:06.388] ubi0:animations is mounted. [2025-09-24 10:46:06.457] RTNETLINK answers: File exists [2025-09-24 10:46:06.457] ubi1:dml_code is mounted. [2025-09-24 10:46:06.457] ubi2:textures is mounted. [2025-09-24 10:46:06.457] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:46:06.457] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:46:06.457] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:46:06.457] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:46:06.457] data.LB_FadeInType0=100 [2025-09-24 10:46:06.457] data.CHLH_FadeInType0=0 [2025-09-24 10:46:06.457] data.WU_FadeInDelay=0 [2025-09-24 10:46:06.457] max_time_out=0 [2025-09-24 10:46:06.457] No splash screen [2025-09-24 10:46:06.457] stop dss Done [2025-09-24 10:46:06.457] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:46:06.489] /dev/mem opened. [2025-09-24 10:46:06.521] Memory mapped at address 0xffff98cfb000. [2025-09-24 10:46:06.521] Read at address 0x00600018 (0xffff98cfb018): 0x00000000 [2025-09-24 10:46:06.521] Write at address 0x00600018 (0xffff98cfb018): 0x00400040, readback 0x00400040 [2025-09-24 10:46:06.552] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:46:06.552] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:46:06.744] Loaded PowerVR consumer services. [2025-09-24 10:46:06.796] Waiting data available... [2025-09-24 10:46:06.796] 512+0 records in [2025-09-24 10:46:06.796] 512+0 records out [2025-09-24 10:46:06.828] Starting syslogd/klogd: done [2025-09-24 10:46:06.844] DML Start [2025-09-24 10:46:07.019] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:46:07.244] DML res1: 0 [2025-09-24 10:46:07.700] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:46:07.700] Read Success [2025-09-24 10:46:07.700] Verifying certificate... [2025-09-24 10:46:07.939] Verified OK [2025-09-24 10:46:07.955] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:46:09.602] Verified OK [2025-09-24 10:46:09.623] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:46:10.258] Verified OK [2025-09-24 10:46:10.258] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:46:12.977] fs.protected_hardlinks = 1 [2025-09-24 10:46:12.977] fs.protected_symlinks = 1 [2025-09-24 10:46:12.977] kernel.modules_disabled = 1 [2025-09-24 10:46:13.168] [2025-09-24 10:46:13.168] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:46:14.349] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:46:22.019] SBL1:1210.0.1.0 [2025-09-24 10:46:22.067] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:46:23.634] SBL2:1210.0.1.0 [2025-09-24 10:46:23.682] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:46:23.778] j-A [2025-09-24 10:46:31.133] The R5 Autosar Classic is running [2025-09-24 10:46:31.157] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:46:31.157] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:46:31.764] INIT: version 2.96 booting [2025-09-24 10:46:31.876] INIT: Entering runlevel: 5 [2025-09-24 10:46:32.036] mtd24 attached [2025-09-24 10:46:32.036] mtd28 attached [2025-09-24 10:46:32.052] mtd32 attached [2025-09-24 10:46:32.100] ubi0:textures is mounted. [2025-09-24 10:46:32.100] RTNETLINK answers: File exists [2025-09-24 10:46:32.156] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:46:32.156] ubi1:animations is mounted. [2025-09-24 10:46:32.156] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:46:32.156] ubi2:dml_code is mounted. [2025-09-24 10:46:32.156] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:46:32.156] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:46:32.156] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:46:32.156] data.LB_FadeInType0=100 [2025-09-24 10:46:32.156] data.CHLH_FadeInType0=0 [2025-09-24 10:46:32.156] data.WU_FadeInDelay=0 [2025-09-24 10:46:32.156] max_time_out=0 [2025-09-24 10:46:32.156] No splash screen [2025-09-24 10:46:32.156] stop dss Done [2025-09-24 10:46:32.188] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:46:32.211] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:46:32.211] /dev/mem opened. [2025-09-24 10:46:32.243] Memory mapped at address 0xffff879ef000. [2025-09-24 10:46:32.243] Read at address 0x00600018 (0xffff879ef018): 0x00000000 [2025-09-24 10:46:32.243] Write at address 0x00600018 (0xffff879ef018): 0x00400040, readback 0x00400040 [2025-09-24 10:46:32.355] Loaded PowerVR consumer services. [2025-09-24 10:46:32.467] 512+0 records in [2025-09-24 10:46:32.467] 512+0 records out [2025-09-24 10:46:32.483] Waiting data available... [2025-09-24 10:46:32.530] Starting syslogd/klogd: done [2025-09-24 10:46:32.546] DML Start [2025-09-24 10:46:32.755] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:46:32.978] DML res1: 0 [2025-09-24 10:46:33.346] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:46:33.362] Read Success [2025-09-24 10:46:33.362] Verifying certificate... [2025-09-24 10:46:33.618] Verified OK [2025-09-24 10:46:33.618] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:46:35.180] Verified OK [2025-09-24 10:46:35.180] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:46:35.747] Verified OK [2025-09-24 10:46:35.747] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:46:38.561] fs.protected_hardlinks = 1 [2025-09-24 10:46:38.577] fs.protected_symlinks = 1 [2025-09-24 10:46:38.577] kernel.modules_disabled = 1 [2025-09-24 10:46:38.785] [2025-09-24 10:46:38.785] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:46:40.043] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:46:47.743] SBL1:1210.0.1.0 [2025-09-24 10:46:47.790] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:46:49.357] SBL2:1210.0.1.0 [2025-09-24 10:46:49.404] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:46:49.500] j-A [2025-09-24 10:46:56.855] The R5 Autosar Classic is running [2025-09-24 10:46:56.880] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:46:56.880] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:46:57.488] INIT: version 2.96 booting [2025-09-24 10:46:57.599] INIT: Entering runlevel: 5 [2025-09-24 10:46:57.744] mtd24 attached [2025-09-24 10:46:57.760] mtd32 attached [2025-09-24 10:46:57.776] mtd28 attached [2025-09-24 10:46:57.792] ubi0:textures is mounted. [2025-09-24 10:46:57.824] RTNETLINK answers: File exists [2025-09-24 10:46:57.879] ubi2:animations is mounted. [2025-09-24 10:46:57.880] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:46:57.880] ubi1:dml_code is mounted. [2025-09-24 10:46:57.880] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:46:57.880] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:46:57.880] data.LB_FadeInType0=100 [2025-09-24 10:46:57.880] data.CHLH_FadeInType0=0 [2025-09-24 10:46:57.880] data.WU_FadeInDelay=0 [2025-09-24 10:46:57.880] max_time_out=0 [2025-09-24 10:46:57.880] No splash screen [2025-09-24 10:46:57.880] stop dss Done [2025-09-24 10:46:57.880] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:46:57.880] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:46:57.911] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:46:57.956] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:46:57.956] /dev/mem opened. [2025-09-24 10:46:57.956] Memory mapped at address 0xffffafa06000. [2025-09-24 10:46:57.956] Read at address 0x00600018 (0xffffafa06018): 0x00000000 [2025-09-24 10:46:57.956] Write at address 0x00600018 (0xffffafa06018): 0x00400040, readback 0x00400040 [2025-09-24 10:46:58.148] Loaded PowerVR consumer services. [2025-09-24 10:46:58.196] Waiting data available... [2025-09-24 10:46:58.212] 512+0 records in [2025-09-24 10:46:58.212] 512+0 records out [2025-09-24 10:46:58.228] Starting syslogd/klogd: done [2025-09-24 10:46:58.260] DML Start [2025-09-24 10:46:58.452] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:46:58.691] DML res1: 0 [2025-09-24 10:46:59.044] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:46:59.060] Read Success [2025-09-24 10:46:59.060] Verifying certificate... [2025-09-24 10:46:59.300] Verified OK [2025-09-24 10:46:59.316] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:47:00.946] Verified OK [2025-09-24 10:47:00.946] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:47:01.617] Verified OK [2025-09-24 10:47:01.638] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:47:04.244] fs.protected_hardlinks = 1 [2025-09-24 10:47:04.260] fs.protected_symlinks = 1 [2025-09-24 10:47:04.260] kernel.modules_disabled = 1 [2025-09-24 10:47:04.468] [2025-09-24 10:47:04.468] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:47:05.754] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:47:13.454] SBL1:1210.0.1.0 [2025-09-24 10:47:13.502] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:47:15.069] SBL2:1210.0.1.0 [2025-09-24 10:47:15.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:47:15.213] j-A [2025-09-24 10:47:22.567] The R5 Autosar Classic is running [2025-09-24 10:47:22.567] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:47:22.588] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:47:23.196] INIT: version 2.96 booting [2025-09-24 10:47:23.308] INIT: Entering runlevel: 5 [2025-09-24 10:47:23.468] mtd28 attached [2025-09-24 10:47:23.484] mtd32 attached [2025-09-24 10:47:23.484] mtd24 attached [2025-09-24 10:47:23.531] ubi0:animations is mounted. [2025-09-24 10:47:23.531] RTNETLINK answers: File exists [2025-09-24 10:47:23.603] ubi2:textures is mounted. [2025-09-24 10:47:23.603] ubi1:dml_code is mounted. [2025-09-24 10:47:23.603] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:47:23.603] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:47:23.603] data.LB_FadeInType0=100 [2025-09-24 10:47:23.603] data.CHLH_FadeInType0=0 [2025-09-24 10:47:23.603] data.WU_FadeInDelay=0 [2025-09-24 10:47:23.603] max_time_out=0 [2025-09-24 10:47:23.603] No splash screen [2025-09-24 10:47:23.603] stop dss Done [2025-09-24 10:47:23.603] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:47:23.603] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:47:23.603] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:47:23.661] /dev/mem opened. [2025-09-24 10:47:23.661] Memory mapped at address 0xffff8d42c000. [2025-09-24 10:47:23.661] Read at address 0x00600018 (0xffff8d42c018): 0x00000000 [2025-09-24 10:47:23.661] Write at address 0x00600018 (0xffff8d42c018): 0x00400040, readback 0x00400040 [2025-09-24 10:47:23.721] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:47:23.721] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:47:23.897] Loaded PowerVR consumer services. [2025-09-24 10:47:23.929] 512+0 records in [2025-09-24 10:47:23.929] 512+0 records out [2025-09-24 10:47:23.945] Waiting data available... [2025-09-24 10:47:23.977] Starting syslogd/klogd: done [2025-09-24 10:47:23.993] DML Start [2025-09-24 10:47:24.186] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:47:24.409] DML res1: 0 [2025-09-24 10:47:24.841] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:47:24.862] Read Success [2025-09-24 10:47:24.862] Verifying certificate... [2025-09-24 10:47:25.134] Verified OK [2025-09-24 10:47:25.149] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:47:26.780] Verified OK [2025-09-24 10:47:26.801] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:47:27.468] Verified OK [2025-09-24 10:47:27.468] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:47:30.090] fs.protected_hardlinks = 1 [2025-09-24 10:47:30.106] fs.protected_symlinks = 1 [2025-09-24 10:47:30.106] kernel.modules_disabled = 1 [2025-09-24 10:47:30.298] [2025-09-24 10:47:30.298] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:47:31.427] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:47:39.158] SBL1:1210.0.1.0 [2025-09-24 10:47:39.206] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:47:40.772] SBL2:1210.0.1.0 [2025-09-24 10:47:40.804] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:47:40.916] j-A [2025-09-24 10:47:48.291] The R5 Autosar Classic is running [2025-09-24 10:47:48.291] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:47:48.291] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:47:48.899] INIT: version 2.96 booting [2025-09-24 10:47:49.010] INIT: Entering runlevel: 5 [2025-09-24 10:47:49.171] mtd32 attached [2025-09-24 10:47:49.171] mtd28 attached [2025-09-24 10:47:49.186] mtd24 attached [2025-09-24 10:47:49.234] ubi0:dml_code is mounted. [2025-09-24 10:47:49.234] RTNETLINK answers: File exists [2025-09-24 10:47:49.292] ubi1:animations is mounted. [2025-09-24 10:47:49.292] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:47:49.292] ubi2:textures is mounted. [2025-09-24 10:47:49.292] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:47:49.292] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:47:49.292] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:47:49.292] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:47:49.292] data.LB_FadeInType0=100 [2025-09-24 10:47:49.292] data.CHLH_FadeInType0=0 [2025-09-24 10:47:49.292] data.WU_FadeInDelay=0 [2025-09-24 10:47:49.292] max_time_out=0 [2025-09-24 10:47:49.292] No splash screen [2025-09-24 10:47:49.292] stop dss Done [2025-09-24 10:47:49.367] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:47:49.367] /dev/mem opened. [2025-09-24 10:47:49.367] Memory mapped at address 0xffffb3377000. [2025-09-24 10:47:49.367] Read at address 0x00600018 (0xffffb3377018): 0x00000000 [2025-09-24 10:47:49.367] Write at address 0x00600018 (0xffffb3377018): 0x00400040, readback 0x00400040 [2025-09-24 10:47:49.367] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:47:49.574] Loaded PowerVR consumer services. [2025-09-24 10:47:49.606] Waiting data available... [2025-09-24 10:47:49.606] 512+0 records in [2025-09-24 10:47:49.606] 512+0 records out [2025-09-24 10:47:49.654] Starting syslogd/klogd: done [2025-09-24 10:47:49.670] DML Start [2025-09-24 10:47:49.879] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:47:50.102] DML res1: 0 [2025-09-24 10:47:50.510] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:47:50.510] Read Success [2025-09-24 10:47:50.510] Verifying certificate... [2025-09-24 10:47:50.733] Verified OK [2025-09-24 10:47:50.749] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:47:52.450] Verified OK [2025-09-24 10:47:52.450] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:47:53.026] Verified OK [2025-09-24 10:47:53.047] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:47:55.573] fs.protected_hardlinks = 1 [2025-09-24 10:47:55.573] fs.protected_symlinks = 1 [2025-09-24 10:47:55.589] kernel.modules_disabled = 1 [2025-09-24 10:47:55.781] [2025-09-24 10:47:55.781] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:47:57.176] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:48:04.863] SBL1:1210.0.1.0 [2025-09-24 10:48:04.911] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:48:06.477] SBL2:1210.0.1.0 [2025-09-24 10:48:06.525] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:48:06.622] j-A [2025-09-24 10:48:13.976] The R5 Autosar Classic is running [2025-09-24 10:48:13.976] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:48:13.997] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:48:14.606] INIT: version 2.96 booting [2025-09-24 10:48:14.717] INIT: Entering runlevel: 5 [2025-09-24 10:48:14.861] mtd28 attached [2025-09-24 10:48:14.877] mtd32 attached [2025-09-24 10:48:14.893] mtd24 attached [2025-09-24 10:48:14.909] ubi0:animations is mounted. [2025-09-24 10:48:14.999] RTNETLINK answers: File exists [2025-09-24 10:48:14.999] ubi1:dml_code is mounted. [2025-09-24 10:48:14.999] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:48:14.999] ubi2:textures is mounted. [2025-09-24 10:48:14.999] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:48:14.999] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:48:14.999] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:48:14.999] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:48:14.999] data.LB_FadeInType0=100 [2025-09-24 10:48:14.999] data.CHLH_FadeInType0=0 [2025-09-24 10:48:14.999] data.WU_FadeInDelay=0 [2025-09-24 10:48:14.999] max_time_out=0 [2025-09-24 10:48:14.999] No splash screen [2025-09-24 10:48:14.999] stop dss Done [2025-09-24 10:48:15.030] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:48:15.030] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:48:15.080] /dev/mem opened. [2025-09-24 10:48:15.080] Memory mapped at address 0xffffa2f7e000. [2025-09-24 10:48:15.080] Read at address 0x00600018 (0xffffa2f7e018): 0x00000000 [2025-09-24 10:48:15.080] Write at address 0x00600018 (0xffffa2f7e018): 0x00400040, readback 0x00400040 [2025-09-24 10:48:15.272] Loaded PowerVR consumer services. [2025-09-24 10:48:15.304] 512+0 records in [2025-09-24 10:48:15.304] 512+0 records out [2025-09-24 10:48:15.336] Waiting data available... [2025-09-24 10:48:15.352] Starting syslogd/klogd: done [2025-09-24 10:48:15.368] DML Start [2025-09-24 10:48:15.527] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:48:15.751] DML res1: 0 [2025-09-24 10:48:16.260] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:48:16.260] Read Success [2025-09-24 10:48:16.260] Verifying certificate... [2025-09-24 10:48:16.548] Verified OK [2025-09-24 10:48:16.564] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:48:18.195] Verified OK [2025-09-24 10:48:18.195] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:48:18.768] Verified OK [2025-09-24 10:48:18.768] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:48:21.423] fs.protected_hardlinks = 1 [2025-09-24 10:48:21.423] fs.protected_symlinks = 1 [2025-09-24 10:48:21.439] kernel.modules_disabled = 1 [2025-09-24 10:48:21.614] [2025-09-24 10:48:21.614] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:48:22.859] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:48:25.172] SBL1:1210.0.1.0 [2025-09-24 10:48:30.624] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:48:32.207] SBL2:1210.0.1.0 [2025-09-24 10:48:32.239] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:48:32.335] j-A [2025-09-24 10:48:39.691] The R5 Autosar Classic is running [2025-09-24 10:48:39.715] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:48:39.715] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:48:40.323] INIT: version 2.96 booting [2025-09-24 10:48:40.434] INIT: Entering runlevel: 5 [2025-09-24 10:48:40.594] mtd32 attached [2025-09-24 10:48:40.594] mtd28 attached [2025-09-24 10:48:40.594] mtd24 attached [2025-09-24 10:48:40.710] RTNETLINK answers: File exists [2025-09-24 10:48:40.710] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:48:40.710] ubi0:dml_code is mounted. [2025-09-24 10:48:40.710] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:48:40.710] ubi1:animations is mounted. [2025-09-24 10:48:40.710] ubi2:textures is mounted. [2025-09-24 10:48:40.710] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:48:40.710] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:48:40.710] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:48:40.710] data.LB_FadeInType0=100 [2025-09-24 10:48:40.710] data.CHLH_FadeInType0=0 [2025-09-24 10:48:40.710] data.WU_FadeInDelay=0 [2025-09-24 10:48:40.710] max_time_out=0 [2025-09-24 10:48:40.710] No splash screen [2025-09-24 10:48:40.710] stop dss Done [2025-09-24 10:48:40.793] /dev/mem opened. [2025-09-24 10:48:40.793] Memory mapped at address 0xffff8bb1e000. [2025-09-24 10:48:40.793] Read at address 0x00600018 (0xffff8bb1e018): 0x00000000 [2025-09-24 10:48:40.793] Write at address 0x00600018 (0xffff8bb1e018): 0x00400040, readback 0x00400040 [2025-09-24 10:48:40.793] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:48:40.793] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:48:40.921] Loaded PowerVR consumer services. [2025-09-24 10:48:41.047] 512+0 records in [2025-09-24 10:48:41.047] 512+0 records out [2025-09-24 10:48:41.047] Waiting data available... [2025-09-24 10:48:41.063] Starting syslogd/klogd: done [2025-09-24 10:48:41.079] DML Start [2025-09-24 10:48:41.271] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:48:41.495] DML res1: 0 [2025-09-24 10:48:41.855] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:48:41.855] Read Success [2025-09-24 10:48:41.855] Verifying certificate... [2025-09-24 10:48:42.062] Verified OK [2025-09-24 10:48:42.078] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:48:43.819] Verified OK [2025-09-24 10:48:43.819] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:48:44.471] Verified OK [2025-09-24 10:48:44.471] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:48:46.918] fs.protected_hardlinks = 1 [2025-09-24 10:48:46.934] fs.protected_symlinks = 1 [2025-09-24 10:48:46.934] kernel.modules_disabled = 1 [2025-09-24 10:48:47.158] [2025-09-24 10:48:47.158] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:48:48.604] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:48:56.282] SBL1:1210.0.1.0 [2025-09-24 10:48:56.330] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:48:57.897] SBL2:1210.0.1.0 [2025-09-24 10:48:57.929] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:48:58.042] j-A [2025-09-24 10:49:05.418] The R5 Autosar Classic is running [2025-09-24 10:49:05.418] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:49:05.418] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:49:06.026] INIT: version 2.96 booting [2025-09-24 10:49:06.137] INIT: Entering runlevel: 5 [2025-09-24 10:49:06.281] mtd32 attached [2025-09-24 10:49:06.297] mtd24 attached [2025-09-24 10:49:06.314] mtd28 attached [2025-09-24 10:49:06.361] RTNETLINK answers: File exists [2025-09-24 10:49:06.403] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:49:06.403] ubi1:textures is mounted. [2025-09-24 10:49:06.403] ubi2:animations is mounted. [2025-09-24 10:49:06.403] ubi0:dml_code is mounted. [2025-09-24 10:49:06.403] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:49:06.403] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:49:06.403] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:49:06.403] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:49:06.403] data.LB_FadeInType0=100 [2025-09-24 10:49:06.403] data.CHLH_FadeInType0=0 [2025-09-24 10:49:06.424] data.WU_FadeInDelay=0 [2025-09-24 10:49:06.424] max_time_out=0 [2025-09-24 10:49:06.424] No splash screen [2025-09-24 10:49:06.424] stop dss Done [2025-09-24 10:49:06.440] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:49:06.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:49:06.504] /dev/mem opened. [2025-09-24 10:49:06.504] Memory mapped at address 0xffff9245f000. [2025-09-24 10:49:06.504] Read at address 0x00600018 (0xffff9245f018): 0x00000000 [2025-09-24 10:49:06.504] Write at address 0x00600018 (0xffff9245f018): 0x00400040, readback 0x00400040 [2025-09-24 10:49:06.712] Loaded PowerVR consumer services. [2025-09-24 10:49:06.744] 512+0 records in [2025-09-24 10:49:06.744] 512+0 records out [2025-09-24 10:49:06.776] Waiting data available... [2025-09-24 10:49:06.808] Starting syslogd/klogd: done [2025-09-24 10:49:06.824] DML Start [2025-09-24 10:49:06.984] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:49:07.224] DML res1: 0 [2025-09-24 10:49:07.650] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:49:07.650] Read Success [2025-09-24 10:49:07.650] Verifying certificate... [2025-09-24 10:49:07.874] Verified OK [2025-09-24 10:49:07.890] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:49:09.585] Verified OK [2025-09-24 10:49:09.585] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:49:10.224] Verified OK [2025-09-24 10:49:10.224] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:49:12.767] fs.protected_hardlinks = 1 [2025-09-24 10:49:12.783] fs.protected_symlinks = 1 [2025-09-24 10:49:12.783] kernel.modules_disabled = 1 [2025-09-24 10:49:12.974] [2025-09-24 10:49:12.974] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:49:14.337] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:49:22.019] SBL1:1210.0.1.0 [2025-09-24 10:49:22.051] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:49:23.634] SBL2:1210.0.1.0 [2025-09-24 10:49:23.665] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:49:23.777] j-A [2025-09-24 10:49:31.117] The R5 Autosar Classic is running [2025-09-24 10:49:31.148] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:49:31.148] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:49:31.756] INIT: version 2.96 booting [2025-09-24 10:49:31.868] INIT: Entering runlevel: 5 [2025-09-24 10:49:32.012] mtd28 attached [2025-09-24 10:49:32.028] mtd24 attached [2025-09-24 10:49:32.044] mtd32 attached [2025-09-24 10:49:32.092] RTNETLINK answers: File exists [2025-09-24 10:49:32.092] ubi0:animations is mounted. [2025-09-24 10:49:32.129] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:49:32.129] ubi1:textures is mounted. [2025-09-24 10:49:32.129] ubi2:dml_code is mounted. [2025-09-24 10:49:32.129] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:49:32.129] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:49:32.129] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:49:32.129] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:49:32.129] data.LB_FadeInType0=100 [2025-09-24 10:49:32.150] data.CHLH_FadeInType0=0 [2025-09-24 10:49:32.150] data.WU_FadeInDelay=0 [2025-09-24 10:49:32.150] max_time_out=0 [2025-09-24 10:49:32.150] No splash screen [2025-09-24 10:49:32.150] stop dss Done [2025-09-24 10:49:32.166] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:49:32.182] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:49:32.198] /dev/mem opened. [2025-09-24 10:49:32.198] Memory mapped at address 0xffff83c57000. [2025-09-24 10:49:32.224] Read at address 0x00600018 (0xffff83c57018): 0x00000000 [2025-09-24 10:49:32.224] Write at address 0x00600018 (0xffff83c57018): 0x00400040, readback 0x00400040 [2025-09-24 10:49:32.384] Loaded PowerVR consumer services. [2025-09-24 10:49:32.496] Waiting data available... [2025-09-24 10:49:32.496] 512+0 records in [2025-09-24 10:49:32.512] 512+0 records out [2025-09-24 10:49:32.528] Starting syslogd/klogd: done [2025-09-24 10:49:32.560] DML Start [2025-09-24 10:49:32.752] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:49:32.960] DML res1: 0 [2025-09-24 10:49:33.367] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:49:33.367] Read Success [2025-09-24 10:49:33.367] Verifying certificate... [2025-09-24 10:49:33.654] Verified OK [2025-09-24 10:49:33.670] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:49:35.377] Verified OK [2025-09-24 10:49:35.377] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:49:35.964] Verified OK [2025-09-24 10:49:35.964] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:49:38.554] fs.protected_hardlinks = 1 [2025-09-24 10:49:38.570] fs.protected_symlinks = 1 [2025-09-24 10:49:38.570] kernel.modules_disabled = 1 [2025-09-24 10:49:38.762] [2025-09-24 10:49:38.762] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:49:40.017] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:49:47.770] SBL1:1210.0.1.0 [2025-09-24 10:49:47.802] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:49:49.384] SBL2:1210.0.1.0 [2025-09-24 10:49:49.417] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:49:49.528] j-A [2025-09-24 10:49:56.868] The R5 Autosar Classic is running [2025-09-24 10:49:56.894] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:49:56.894] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:49:57.501] INIT: version 2.96 booting [2025-09-24 10:49:57.612] INIT: Entering runlevel: 5 [2025-09-24 10:49:57.773] mtd28 attached [2025-09-24 10:49:57.773] mtd24 attached [2025-09-24 10:49:57.805] ubi0:animations is mounted. [2025-09-24 10:49:57.821] mtd32 attached [2025-09-24 10:49:57.821] ubi1:textures is mounted. [2025-09-24 10:49:57.837] RTNETLINK answers: File exists [2025-09-24 10:49:57.881] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:49:57.881] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:49:57.881] ubi2:dml_code is mounted. [2025-09-24 10:49:57.881] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:49:57.881] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:49:57.881] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:49:57.881] data.LB_FadeInType0=100 [2025-09-24 10:49:57.902] data.CHLH_FadeInType0=0 [2025-09-24 10:49:57.902] data.WU_FadeInDelay=0 [2025-09-24 10:49:57.902] max_time_out=0 [2025-09-24 10:49:57.902] No splash screen [2025-09-24 10:49:57.902] stop dss Done [2025-09-24 10:49:57.950] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:49:57.985] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:49:57.985] /dev/mem opened. [2025-09-24 10:49:57.985] Memory mapped at address 0xffffad46a000. [2025-09-24 10:49:57.985] Read at address 0x00600018 (0xffffad46a018): 0x00000000 [2025-09-24 10:49:57.985] Write at address 0x00600018 (0xffffad46a018): 0x00400040, readback 0x00400040 [2025-09-24 10:49:58.080] Loaded PowerVR consumer services. [2025-09-24 10:49:58.209] 512+0 records in [2025-09-24 10:49:58.225] 512+0 records out [2025-09-24 10:49:58.225] Waiting data available... [2025-09-24 10:49:58.241] Starting syslogd/klogd: done [2025-09-24 10:49:58.257] DML Start [2025-09-24 10:49:58.464] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:49:58.688] DML res1: 0 [2025-09-24 10:49:59.097] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:49:59.097] Read Success [2025-09-24 10:49:59.097] Verifying certificate... [2025-09-24 10:49:59.337] Verified OK [2025-09-24 10:49:59.337] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:50:01.016] Verified OK [2025-09-24 10:50:01.032] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:50:01.709] Verified OK [2025-09-24 10:50:01.709] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:50:04.395] fs.protected_hardlinks = 1 [2025-09-24 10:50:04.395] fs.protected_symlinks = 1 [2025-09-24 10:50:04.411] kernel.modules_disabled = 1 [2025-09-24 10:50:04.603] [2025-09-24 10:50:04.603] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:50:05.749] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:50:13.481] SBL1:1210.0.1.0 [2025-09-24 10:50:13.529] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:50:15.096] SBL2:1210.0.1.0 [2025-09-24 10:50:15.128] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:50:15.240] j-A [2025-09-24 10:50:22.614] The R5 Autosar Classic is running [2025-09-24 10:50:22.614] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:50:22.614] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:50:23.221] INIT: version 2.96 booting [2025-09-24 10:50:23.334] INIT: Entering runlevel: 5 [2025-09-24 10:50:23.478] mtd28 attached [2025-09-24 10:50:23.494] mtd24 attached [2025-09-24 10:50:23.494] mtd32 attached [2025-09-24 10:50:23.542] ubi0:animations is mounted. [2025-09-24 10:50:23.558] RTNETLINK answers: File exists [2025-09-24 10:50:23.558] ubi1:textures is mounted. [2025-09-24 10:50:23.591] ubi2:dml_code is mounted. [2025-09-24 10:50:23.591] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:50:23.591] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:50:23.591] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:50:23.591] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:50:23.623] data.LB_FadeInType0=100 [2025-09-24 10:50:23.623] data.CHLH_FadeInType0=0 [2025-09-24 10:50:23.623] data.WU_FadeInDelay=0 [2025-09-24 10:50:23.623] max_time_out=0 [2025-09-24 10:50:23.623] No splash screen [2025-09-24 10:50:23.623] stop dss Done [2025-09-24 10:50:23.623] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:50:23.702] /dev/mem opened. [2025-09-24 10:50:23.702] Memory mapped at address 0xffff971cf000. [2025-09-24 10:50:23.702] Read at address 0x00600018 (0xffff971cf018): 0x00000000 [2025-09-24 10:50:23.702] Write at address 0x00600018 (0xffff971cf018): 0x00400040, readback 0x00400040 [2025-09-24 10:50:23.702] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:50:23.702] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:50:23.910] Loaded PowerVR consumer services. [2025-09-24 10:50:23.943] Waiting data available... [2025-09-24 10:50:23.959] 512+0 records in [2025-09-24 10:50:23.959] 512+0 records out [2025-09-24 10:50:23.975] Starting syslogd/klogd: done [2025-09-24 10:50:23.991] DML Start [2025-09-24 10:50:24.166] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:50:24.407] DML res1: 0 [2025-09-24 10:50:24.854] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:50:24.874] Read Success [2025-09-24 10:50:24.874] Verifying certificate... [2025-09-24 10:50:25.115] Verified OK [2025-09-24 10:50:25.131] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:50:26.634] Verified OK [2025-09-24 10:50:26.634] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:50:27.238] Verified OK [2025-09-24 10:50:27.238] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:50:29.956] fs.protected_hardlinks = 1 [2025-09-24 10:50:29.972] fs.protected_symlinks = 1 [2025-09-24 10:50:29.972] kernel.modules_disabled = 1 [2025-09-24 10:50:30.164] [2025-09-24 10:50:30.164] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:50:31.530] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:50:39.200] SBL1:1210.0.1.0 [2025-09-24 10:50:39.248] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:50:40.815] SBL2:1210.0.1.0 [2025-09-24 10:50:40.847] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:50:40.959] j-A [2025-09-24 10:50:48.335] The R5 Autosar Classic is running [2025-09-24 10:50:48.335] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:50:48.335] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:50:48.943] INIT: version 2.96 booting [2025-09-24 10:50:49.054] INIT: Entering runlevel: 5 [2025-09-24 10:50:49.215] mtd24 attached [2025-09-24 10:50:49.215] mtd28 attached [2025-09-24 10:50:49.231] mtd32 attached [2025-09-24 10:50:49.278] RTNETLINK answers: File exists [2025-09-24 10:50:49.294] ubi0:textures is mounted. [2025-09-24 10:50:49.294] ubi1:animations is mounted. [2025-09-24 10:50:49.323] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:50:49.323] ubi2:dml_code is mounted. [2025-09-24 10:50:49.323] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:50:49.323] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:50:49.323] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:50:49.354] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:50:49.354] data.LB_FadeInType0=100 [2025-09-24 10:50:49.354] data.CHLH_FadeInType0=0 [2025-09-24 10:50:49.354] data.WU_FadeInDelay=0 [2025-09-24 10:50:49.354] max_time_out=0 [2025-09-24 10:50:49.354] No splash screen [2025-09-24 10:50:49.354] stop dss Done [2025-09-24 10:50:49.402] /dev/mem opened. [2025-09-24 10:50:49.402] Memory mapped at address 0xffff8acaf000. [2025-09-24 10:50:49.440] Read at address 0x00600018 (0xffff8acaf018): 0x00000000 [2025-09-24 10:50:49.440] Write at address 0x00600018 (0xffff8acaf018): 0x00400040, readback 0x00400040 [2025-09-24 10:50:49.440] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:50:49.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:50:49.615] Loaded PowerVR consumer services. [2025-09-24 10:50:49.663] Waiting data available... [2025-09-24 10:50:49.663] 512+0 records in [2025-09-24 10:50:49.679] 512+0 records out [2025-09-24 10:50:49.695] Starting syslogd/klogd: done [2025-09-24 10:50:49.712] DML Start [2025-09-24 10:50:49.887] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:50:50.080] DML res1: 0 [2025-09-24 10:50:50.621] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:50:50.621] Read Success [2025-09-24 10:50:50.621] Verifying certificate... [2025-09-24 10:50:50.844] Verified OK [2025-09-24 10:50:50.860] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:50:52.428] Verified OK [2025-09-24 10:50:52.450] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:50:53.131] Verified OK [2025-09-24 10:50:53.131] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:50:55.866] fs.protected_hardlinks = 1 [2025-09-24 10:50:55.866] fs.protected_symlinks = 1 [2025-09-24 10:50:55.882] kernel.modules_disabled = 1 [2025-09-24 10:50:56.090] [2025-09-24 10:50:56.090] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:50:57.206] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:51:04.947] SBL1:1210.0.1.0 [2025-09-24 10:51:04.979] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:51:06.562] SBL2:1210.0.1.0 [2025-09-24 10:51:06.594] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:51:06.706] j-A [2025-09-24 10:51:14.076] The R5 Autosar Classic is running [2025-09-24 10:51:14.076] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:51:14.076] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:51:14.683] INIT: version 2.96 booting [2025-09-24 10:51:14.796] INIT: Entering runlevel: 5 [2025-09-24 10:51:14.939] mtd24 attached [2025-09-24 10:51:14.955] mtd32 attached [2025-09-24 10:51:14.971] mtd28 attached [2025-09-24 10:51:14.971] ubi0:textures is mounted. [2025-09-24 10:51:15.055] RTNETLINK answers: File exists [2025-09-24 10:51:15.055] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:51:15.055] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:51:15.055] ubi1:dml_code is mounted. [2025-09-24 10:51:15.055] ubi2:animations is mounted. [2025-09-24 10:51:15.055] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:51:15.055] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:51:15.055] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:51:15.079] data.LB_FadeInType0=100 [2025-09-24 10:51:15.079] data.CHLH_FadeInType0=0 [2025-09-24 10:51:15.079] data.WU_FadeInDelay=0 [2025-09-24 10:51:15.079] max_time_out=0 [2025-09-24 10:51:15.079] No splash screen [2025-09-24 10:51:15.079] stop dss Done [2025-09-24 10:51:15.095] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:51:15.111] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:51:15.151] /dev/mem opened. [2025-09-24 10:51:15.151] Memory mapped at address 0xffffab6dd000. [2025-09-24 10:51:15.151] Read at address 0x00600018 (0xffffab6dd018): 0x00000000 [2025-09-24 10:51:15.151] Write at address 0x00600018 (0xffffab6dd018): 0x00400040, readback 0x00400040 [2025-09-24 10:51:15.248] Loaded PowerVR consumer services. [2025-09-24 10:51:15.375] Waiting data available... [2025-09-24 10:51:15.391] 512+0 records in [2025-09-24 10:51:15.391] 512+0 records out [2025-09-24 10:51:15.439] Starting syslogd/klogd: done [2025-09-24 10:51:15.455] DML Start [2025-09-24 10:51:15.631] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:51:15.855] DML res1: 0 [2025-09-24 10:51:16.329] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:51:16.329] Read Success [2025-09-24 10:51:16.329] Verifying certificate... [2025-09-24 10:51:16.553] Verified OK [2025-09-24 10:51:16.569] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:51:18.215] Verified OK [2025-09-24 10:51:18.215] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:51:18.883] Verified OK [2025-09-24 10:51:18.883] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:51:21.522] fs.protected_hardlinks = 1 [2025-09-24 10:51:21.537] fs.protected_symlinks = 1 [2025-09-24 10:51:21.537] kernel.modules_disabled = 1 [2025-09-24 10:51:21.746] [2025-09-24 10:51:21.746] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:51:22.944] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:51:30.648] SBL1:1210.0.1.0 [2025-09-24 10:51:30.679] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:51:32.263] SBL2:1210.0.1.0 [2025-09-24 10:51:32.294] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:51:32.407] j-A [2025-09-24 10:51:39.777] The R5 Autosar Classic is running [2025-09-24 10:51:39.777] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:51:39.777] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:51:40.384] INIT: version 2.96 booting [2025-09-24 10:51:40.496] INIT: Entering runlevel: 5 [2025-09-24 10:51:40.656] mtd32 attached [2025-09-24 10:51:40.656] mtd28 attached [2025-09-24 10:51:40.656] mtd24 attached [2025-09-24 10:51:40.719] ubi0:dml_code is mounted. [2025-09-24 10:51:40.719] RTNETLINK answers: File exists [2025-09-24 10:51:40.778] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:51:40.778] ubi2:textures is mounted. [2025-09-24 10:51:40.778] ubi1:animations is mounted. [2025-09-24 10:51:40.778] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:51:40.778] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:51:40.778] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:51:40.778] data.LB_FadeInType0=100 [2025-09-24 10:51:40.778] data.CHLH_FadeInType0=0 [2025-09-24 10:51:40.778] data.WU_FadeInDelay=0 [2025-09-24 10:51:40.778] max_time_out=0 [2025-09-24 10:51:40.778] No splash screen [2025-09-24 10:51:40.778] stop dss Done [2025-09-24 10:51:40.778] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:51:40.826] /dev/mem opened. [2025-09-24 10:51:40.826] Memory mapped at address 0xffffaa10c000. [2025-09-24 10:51:40.866] Read at address 0x00600018 (0xffffaa10c018): 0x00000000 [2025-09-24 10:51:40.866] Write at address 0x00600018 (0xffffaa10c018): 0x00400040, readback 0x00400040 [2025-09-24 10:51:40.866] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:51:40.866] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:51:40.978] Loaded PowerVR consumer services. [2025-09-24 10:51:41.090] Waiting data available... [2025-09-24 10:51:41.090] 512+0 records in [2025-09-24 10:51:41.090] 512+0 records out [2025-09-24 10:51:41.138] Starting syslogd/klogd: done [2025-09-24 10:51:41.154] DML Start [2025-09-24 10:51:41.314] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:51:41.521] DML res1: 0 [2025-09-24 10:51:42.041] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:51:42.041] Read Success [2025-09-24 10:51:42.041] Verifying certificate... [2025-09-24 10:51:42.313] Verified OK [2025-09-24 10:51:42.329] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:51:44.039] Verified OK [2025-09-24 10:51:44.039] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:51:44.584] Verified OK [2025-09-24 10:51:44.584] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:51:47.030] fs.protected_hardlinks = 1 [2025-09-24 10:51:47.030] fs.protected_symlinks = 1 [2025-09-24 10:51:47.046] kernel.modules_disabled = 1 [2025-09-24 10:51:47.253] [2025-09-24 10:51:47.253] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:51:48.651] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:51:56.348] SBL1:1210.0.1.0 [2025-09-24 10:51:56.379] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:51:57.963] SBL2:1210.0.1.0 [2025-09-24 10:51:57.995] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:51:58.107] j-A [2025-09-24 10:52:05.479] The R5 Autosar Classic is running [2025-09-24 10:52:05.479] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:52:05.479] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:52:06.086] INIT: version 2.96 booting [2025-09-24 10:52:06.198] INIT: Entering runlevel: 5 [2025-09-24 10:52:06.342] mtd24 attached [2025-09-24 10:52:06.358] mtd28 attached [2025-09-24 10:52:06.374] mtd32 attached [2025-09-24 10:52:06.422] ubi0:textures is mounted. [2025-09-24 10:52:06.422] ubi1:animations is mounted. [2025-09-24 10:52:06.486] RTNETLINK answers: File exists [2025-09-24 10:52:06.486] ubi2:dml_code is mounted. [2025-09-24 10:52:06.486] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:52:06.486] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:52:06.486] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:52:06.486] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:52:06.486] data.LB_FadeInType0=100 [2025-09-24 10:52:06.486] data.CHLH_FadeInType0=0 [2025-09-24 10:52:06.486] data.WU_FadeInDelay=0 [2025-09-24 10:52:06.486] max_time_out=0 [2025-09-24 10:52:06.486] No splash screen [2025-09-24 10:52:06.486] stop dss Done [2025-09-24 10:52:06.486] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:52:06.551] /dev/mem opened. [2025-09-24 10:52:06.551] Memory mapped at address 0xffffadafd000. [2025-09-24 10:52:06.551] Read at address 0x00600018 (0xffffadafd018): 0x00000000 [2025-09-24 10:52:06.551] Write at address 0x00600018 (0xffffadafd018): 0x00400040, readback 0x00400040 [2025-09-24 10:52:06.567] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:52:06.583] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:52:06.679] Loaded PowerVR consumer services. [2025-09-24 10:52:06.813] 512+0 records in [2025-09-24 10:52:06.813] 512+0 records out [2025-09-24 10:52:06.813] Waiting data available... [2025-09-24 10:52:06.845] Starting syslogd/klogd: done [2025-09-24 10:52:06.861] DML Start [2025-09-24 10:52:07.020] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:52:07.260] DML res1: 0 [2025-09-24 10:52:07.706] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:52:07.706] Read Success [2025-09-24 10:52:07.706] Verifying certificate... [2025-09-24 10:52:07.962] Verified OK [2025-09-24 10:52:07.978] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:52:09.669] Verified OK [2025-09-24 10:52:09.669] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:52:10.213] Verified OK [2025-09-24 10:52:10.213] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:52:12.691] fs.protected_hardlinks = 1 [2025-09-24 10:52:12.707] fs.protected_symlinks = 1 [2025-09-24 10:52:12.707] kernel.modules_disabled = 1 [2025-09-24 10:52:12.915] [2025-09-24 10:52:12.915] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:52:14.362] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:52:22.050] SBL1:1210.0.1.0 [2025-09-24 10:52:22.098] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:52:23.665] SBL2:1210.0.1.0 [2025-09-24 10:52:23.696] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:52:23.809] j-A [2025-09-24 10:52:31.184] The R5 Autosar Classic is running [2025-09-24 10:52:31.184] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:52:31.184] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:52:31.791] INIT: version 2.96 booting [2025-09-24 10:52:31.903] INIT: Entering runlevel: 5 [2025-09-24 10:52:32.047] mtd28 attached [2025-09-24 10:52:32.063] mtd24 attached [2025-09-24 10:52:32.079] mtd32 attached [2025-09-24 10:52:32.127] RTNETLINK answers: File exists [2025-09-24 10:52:32.127] ubi1:textures is mounted. [2025-09-24 10:52:32.197] ubi0:animations is mounted. [2025-09-24 10:52:32.197] ubi2:dml_code is mounted. [2025-09-24 10:52:32.197] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:52:32.197] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:52:32.197] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:52:32.197] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:52:32.197] data.LB_FadeInType0=100 [2025-09-24 10:52:32.197] data.CHLH_FadeInType0=0 [2025-09-24 10:52:32.197] data.WU_FadeInDelay=0 [2025-09-24 10:52:32.197] max_time_out=0 [2025-09-24 10:52:32.197] No splash screen [2025-09-24 10:52:32.197] stop dss Done [2025-09-24 10:52:32.197] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:52:32.276] /dev/mem opened. [2025-09-24 10:52:32.276] Memory mapped at address 0xffff8f30a000. [2025-09-24 10:52:32.276] Read at address 0x00600018 (0xffff8f30a018): 0x00000000 [2025-09-24 10:52:32.276] Write at address 0x00600018 (0xffff8f30a018): 0x00400040, readback 0x00400040 [2025-09-24 10:52:32.276] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:52:32.292] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:52:32.468] Loaded PowerVR consumer services. [2025-09-24 10:52:32.532] 512+0 records in [2025-09-24 10:52:32.548] 512+0 records out [2025-09-24 10:52:32.548] Waiting data available... [2025-09-24 10:52:32.580] Starting syslogd/klogd: done [2025-09-24 10:52:32.596] DML Start [2025-09-24 10:52:32.740] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:52:32.916] DML res1: 0 [2025-09-24 10:52:33.458] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:52:33.458] Read Success [2025-09-24 10:52:33.458] Verifying certificate... [2025-09-24 10:52:33.762] Verified OK [2025-09-24 10:52:33.778] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:52:35.547] Verified OK [2025-09-24 10:52:35.547] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:52:36.027] Verified OK [2025-09-24 10:52:36.027] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:52:38.505] fs.protected_hardlinks = 1 [2025-09-24 10:52:38.505] fs.protected_symlinks = 1 [2025-09-24 10:52:38.521] kernel.modules_disabled = 1 [2025-09-24 10:52:38.712] [2025-09-24 10:52:38.712] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:52:40.082] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:52:47.762] SBL1:1210.0.1.0 [2025-09-24 10:52:47.810] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:52:49.376] SBL2:1210.0.1.0 [2025-09-24 10:52:49.423] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:52:49.519] j-A [2025-09-24 10:52:56.875] The R5 Autosar Classic is running [2025-09-24 10:52:56.899] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:52:56.899] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:52:57.507] INIT: version 2.96 booting [2025-09-24 10:52:57.619] INIT: Entering runlevel: 5 [2025-09-24 10:52:57.779] mtd24 attached [2025-09-24 10:52:57.779] mtd28 attached [2025-09-24 10:52:57.795] mtd32 attached [2025-09-24 10:52:57.843] ubi0:textures is mounted. [2025-09-24 10:52:57.911] RTNETLINK answers: File exists [2025-09-24 10:52:57.911] ubi2:dml_code is mounted. [2025-09-24 10:52:57.911] ubi1:animations is mounted. [2025-09-24 10:52:57.911] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:52:57.911] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:52:57.911] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:52:57.911] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:52:57.911] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:52:57.911] data.LB_FadeInType0=100 [2025-09-24 10:52:57.911] data.CHLH_FadeInType0=0 [2025-09-24 10:52:57.911] data.WU_FadeInDelay=0 [2025-09-24 10:52:57.911] max_time_out=0 [2025-09-24 10:52:57.911] No splash screen [2025-09-24 10:52:57.911] stop dss Done [2025-09-24 10:52:57.943] /dev/mem opened. [2025-09-24 10:52:57.975] Memory mapped at address 0xffff8b35f000. [2025-09-24 10:52:57.975] Read at address 0x00600018 (0xffff8b35f018): 0x00000000 [2025-09-24 10:52:57.975] Write at address 0x00600018 (0xffff8b35f018): 0x00400040, readback 0x00400040 [2025-09-24 10:52:57.975] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:52:58.002] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:52:58.163] Loaded PowerVR consumer services. [2025-09-24 10:52:58.227] 512+0 records in [2025-09-24 10:52:58.227] 512+0 records out [2025-09-24 10:52:58.259] Waiting data available... [2025-09-24 10:52:58.291] Starting syslogd/klogd: done [2025-09-24 10:52:58.307] DML Start [2025-09-24 10:52:58.450] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:52:58.754] DML res1: 0 [2025-09-24 10:52:59.136] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:52:59.136] Read Success [2025-09-24 10:52:59.136] Verifying certificate... [2025-09-24 10:52:59.391] Verified OK [2025-09-24 10:52:59.424] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:53:01.135] Verified OK [2025-09-24 10:53:01.135] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:53:01.710] Verified OK [2025-09-24 10:53:01.710] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:53:04.396] fs.protected_hardlinks = 1 [2025-09-24 10:53:04.396] fs.protected_symlinks = 1 [2025-09-24 10:53:04.412] kernel.modules_disabled = 1 [2025-09-24 10:53:04.604] [2025-09-24 10:53:04.604] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:53:05.810] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:53:13.488] SBL1:1210.0.1.0 [2025-09-24 10:53:13.520] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:53:15.103] SBL2:1210.0.1.0 [2025-09-24 10:53:15.134] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:53:15.246] j-A [2025-09-24 10:53:22.586] The R5 Autosar Classic is running [2025-09-24 10:53:22.617] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:53:22.617] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:53:23.225] INIT: version 2.96 booting [2025-09-24 10:53:23.337] INIT: Entering runlevel: 5 [2025-09-24 10:53:23.480] mtd24 attached [2025-09-24 10:53:23.497] mtd28 attached [2025-09-24 10:53:23.513] mtd32 attached [2025-09-24 10:53:23.545] ubi0:textures is mounted. [2025-09-24 10:53:23.561] RTNETLINK answers: File exists [2025-09-24 10:53:23.615] ubi1:animations is mounted. [2025-09-24 10:53:23.615] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:53:23.615] ubi2:dml_code is mounted. [2025-09-24 10:53:23.615] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:53:23.615] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:53:23.615] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:53:23.615] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:53:23.615] data.LB_FadeInType0=100 [2025-09-24 10:53:23.615] data.CHLH_FadeInType0=0 [2025-09-24 10:53:23.615] data.WU_FadeInDelay=0 [2025-09-24 10:53:23.615] max_time_out=0 [2025-09-24 10:53:23.615] No splash screen [2025-09-24 10:53:23.615] stop dss Done [2025-09-24 10:53:23.702] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:53:23.702] /dev/mem opened. [2025-09-24 10:53:23.702] Memory mapped at address 0xffffb14a2000. [2025-09-24 10:53:23.702] Read at address 0x00600018 (0xffffb14a2018): 0x00000000 [2025-09-24 10:53:23.702] Write at address 0x00600018 (0xffffb14a2018): 0x00400040, readback 0x00400040 [2025-09-24 10:53:23.702] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:53:23.894] Loaded PowerVR consumer services. [2025-09-24 10:53:23.969] Waiting data available... [2025-09-24 10:53:23.969] 512+0 records in [2025-09-24 10:53:23.969] 512+0 records out [2025-09-24 10:53:23.985] Starting syslogd/klogd: done [2025-09-24 10:53:24.001] DML Start [2025-09-24 10:53:24.177] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:53:24.433] DML res1: 0 [2025-09-24 10:53:24.816] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:53:24.837] Read Success [2025-09-24 10:53:24.837] Verifying certificate... [2025-09-24 10:53:25.093] Verified OK [2025-09-24 10:53:25.109] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:53:26.820] Verified OK [2025-09-24 10:53:26.842] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:53:27.432] Verified OK [2025-09-24 10:53:27.432] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:53:29.990] fs.protected_hardlinks = 1 [2025-09-24 10:53:30.005] fs.protected_symlinks = 1 [2025-09-24 10:53:30.005] kernel.modules_disabled = 1 [2025-09-24 10:53:30.214] [2025-09-24 10:53:30.214] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:53:31.522] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:53:39.193] SBL1:1210.0.1.0 [2025-09-24 10:53:39.225] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:53:40.808] SBL2:1210.0.1.0 [2025-09-24 10:53:40.840] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:53:40.953] j-A [2025-09-24 10:53:48.292] The R5 Autosar Classic is running [2025-09-24 10:53:48.324] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:53:48.324] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:53:48.931] INIT: version 2.96 booting [2025-09-24 10:53:49.043] INIT: Entering runlevel: 5 [2025-09-24 10:53:49.203] mtd28 attached [2025-09-24 10:53:49.203] mtd24 attached [2025-09-24 10:53:49.219] mtd32 attached [2025-09-24 10:53:49.267] ubi1:textures is mounted. [2025-09-24 10:53:49.330] ubi0:animations is mounted. [2025-09-24 10:53:49.330] RTNETLINK answers: File exists [2025-09-24 10:53:49.330] ubi2:dml_code is mounted. [2025-09-24 10:53:49.330] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:53:49.330] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:53:49.330] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:53:49.330] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:53:49.330] data.LB_FadeInType0=100 [2025-09-24 10:53:49.330] data.CHLH_FadeInType0=0 [2025-09-24 10:53:49.330] data.WU_FadeInDelay=0 [2025-09-24 10:53:49.330] max_time_out=0 [2025-09-24 10:53:49.330] No splash screen [2025-09-24 10:53:49.330] stop dss Done [2025-09-24 10:53:49.330] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:53:49.406] /dev/mem opened. [2025-09-24 10:53:49.406] Memory mapped at address 0xffffb60b1000. [2025-09-24 10:53:49.406] Read at address 0x00600018 (0xffffb60b1018): 0x00000000 [2025-09-24 10:53:49.406] Write at address 0x00600018 (0xffffb60b1018): 0x00400040, readback 0x00400040 [2025-09-24 10:53:49.406] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:53:49.406] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:53:49.518] Loaded PowerVR consumer services. [2025-09-24 10:53:49.674] Waiting data available... [2025-09-24 10:53:49.674] 512+0 records in [2025-09-24 10:53:49.674] 512+0 records out [2025-09-24 10:53:49.690] Starting syslogd/klogd: done [2025-09-24 10:53:49.706] DML Start [2025-09-24 10:53:49.898] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:53:50.073] DML res1: 0 [2025-09-24 10:53:50.570] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:53:50.586] Read Success [2025-09-24 10:53:50.586] Verifying certificate... [2025-09-24 10:53:50.809] Verified OK [2025-09-24 10:53:50.825] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:53:52.488] Verified OK [2025-09-24 10:53:52.488] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:53:53.103] Verified OK [2025-09-24 10:53:53.103] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:53:55.710] fs.protected_hardlinks = 1 [2025-09-24 10:53:55.710] fs.protected_symlinks = 1 [2025-09-24 10:53:55.726] kernel.modules_disabled = 1 [2025-09-24 10:53:55.917] [2025-09-24 10:53:55.917] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:53:57.126] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:54:04.900] SBL1:1210.0.1.0 [2025-09-24 10:54:04.948] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:54:06.515] SBL2:1210.0.1.0 [2025-09-24 10:54:06.563] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:54:06.659] j-A [2025-09-24 10:54:14.015] The R5 Autosar Classic is running [2025-09-24 10:54:14.038] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:54:14.038] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:54:14.645] INIT: version 2.96 booting [2025-09-24 10:54:14.757] INIT: Entering runlevel: 5 [2025-09-24 10:54:14.901] mtd24 attached [2025-09-24 10:54:14.917] mtd28 attached [2025-09-24 10:54:14.933] mtd32 attached [2025-09-24 10:54:14.965] ubi0:textures is mounted. [2025-09-24 10:54:14.981] ubi1:animations is mounted. [2025-09-24 10:54:15.040] RTNETLINK answers: File exists [2025-09-24 10:54:15.040] ubi2:dml_code is mounted. [2025-09-24 10:54:15.040] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:54:15.040] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:54:15.040] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:54:15.040] data.LB_FadeInType0=100 [2025-09-24 10:54:15.040] data.CHLH_FadeInType0=0 [2025-09-24 10:54:15.040] data.WU_FadeInDelay=0 [2025-09-24 10:54:15.040] max_time_out=0 [2025-09-24 10:54:15.040] No splash screen [2025-09-24 10:54:15.040] stop dss Done [2025-09-24 10:54:15.040] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:54:15.040] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:54:15.136] /dev/mem opened. [2025-09-24 10:54:15.136] Memory mapped at address 0xffffb02f0000. [2025-09-24 10:54:15.136] Read at address 0x00600018 (0xffffb02f0018): 0x00000000 [2025-09-24 10:54:15.136] Write at address 0x00600018 (0xffffb02f0018): 0x00400040, readback 0x00400040 [2025-09-24 10:54:15.136] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:54:15.136] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:54:15.216] Loaded PowerVR consumer services. [2025-09-24 10:54:15.370] 512+0 records in [2025-09-24 10:54:15.370] 512+0 records out [2025-09-24 10:54:15.370] Waiting data available... [2025-09-24 10:54:15.386] Starting syslogd/klogd: done [2025-09-24 10:54:15.402] DML Start [2025-09-24 10:54:15.578] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:54:15.801] DML res1: 0 [2025-09-24 10:54:16.254] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:54:16.254] Read Success [2025-09-24 10:54:16.254] Verifying certificate... [2025-09-24 10:54:16.542] Verified OK [2025-09-24 10:54:16.558] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:54:18.247] Verified OK [2025-09-24 10:54:18.247] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:54:18.855] Verified OK [2025-09-24 10:54:18.855] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:54:21.460] fs.protected_hardlinks = 1 [2025-09-24 10:54:21.460] fs.protected_symlinks = 1 [2025-09-24 10:54:21.460] kernel.modules_disabled = 1 [2025-09-24 10:54:21.636] [2025-09-24 10:54:21.636] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:54:22.910] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:54:30.624] SBL1:1210.0.1.0 [2025-09-24 10:54:30.672] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:54:32.238] SBL2:1210.0.1.0 [2025-09-24 10:54:32.287] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:54:32.382] j-A [2025-09-24 10:54:39.737] The R5 Autosar Classic is running [2025-09-24 10:54:39.760] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:54:39.760] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:54:40.368] INIT: version 2.96 booting [2025-09-24 10:54:40.480] INIT: Entering runlevel: 5 [2025-09-24 10:54:40.640] mtd28 attached [2025-09-24 10:54:40.656] mtd32 attached [2025-09-24 10:54:40.656] mtd24 attached [2025-09-24 10:54:40.703] RTNETLINK answers: File exists [2025-09-24 10:54:40.765] ubi1:dml_code is mounted. [2025-09-24 10:54:40.765] ubi0:animations is mounted. [2025-09-24 10:54:40.765] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:54:40.765] ubi2:textures is mounted. [2025-09-24 10:54:40.765] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:54:40.765] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:54:40.765] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:54:40.765] data.LB_FadeInType0=100 [2025-09-24 10:54:40.765] data.CHLH_FadeInType0=0 [2025-09-24 10:54:40.765] data.WU_FadeInDelay=0 [2025-09-24 10:54:40.765] max_time_out=0 [2025-09-24 10:54:40.765] No splash screen [2025-09-24 10:54:40.765] stop dss Done [2025-09-24 10:54:40.765] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:54:40.846] /dev/mem opened. [2025-09-24 10:54:40.846] Memory mapped at address 0xffff867bc000. [2025-09-24 10:54:40.846] Read at address 0x00600018 (0xffff867bc018): 0x00000000 [2025-09-24 10:54:40.846] Write at address 0x00600018 (0xffff867bc018): 0x00400040, readback 0x00400040 [2025-09-24 10:54:40.846] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:54:40.846] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:54:40.958] Loaded PowerVR consumer services. [2025-09-24 10:54:41.097] Waiting data available... [2025-09-24 10:54:41.097] 512+0 records in [2025-09-24 10:54:41.097] 512+0 records out [2025-09-24 10:54:41.129] Starting syslogd/klogd: done [2025-09-24 10:54:41.160] DML Start [2025-09-24 10:54:41.321] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:54:41.544] DML res1: 0 [2025-09-24 10:54:41.954] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:54:41.954] Read Success [2025-09-24 10:54:41.954] Verifying certificate... [2025-09-24 10:54:42.193] Verified OK [2025-09-24 10:54:42.225] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:54:43.918] Verified OK [2025-09-24 10:54:43.918] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:54:44.556] Verified OK [2025-09-24 10:54:44.556] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:54:47.194] fs.protected_hardlinks = 1 [2025-09-24 10:54:47.194] fs.protected_symlinks = 1 [2025-09-24 10:54:47.210] kernel.modules_disabled = 1 [2025-09-24 10:54:47.401] [2025-09-24 10:54:47.401] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:54:48.614] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:54:56.346] SBL1:1210.0.1.0 [2025-09-24 10:54:56.394] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:54:57.977] SBL2:1210.0.1.0 [2025-09-24 10:54:58.009] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:54:58.121] j-A [2025-09-24 10:55:05.461] The R5 Autosar Classic is running [2025-09-24 10:55:05.486] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:55:05.486] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:55:06.093] INIT: version 2.96 booting [2025-09-24 10:55:06.205] INIT: Entering runlevel: 5 [2025-09-24 10:55:06.365] mtd28 attached [2025-09-24 10:55:06.365] mtd24 attached [2025-09-24 10:55:06.381] mtd32 attached [2025-09-24 10:55:06.413] ubi0:animations is mounted. [2025-09-24 10:55:06.429] RTNETLINK answers: File exists [2025-09-24 10:55:06.490] ubi1:textures is mounted. [2025-09-24 10:55:06.490] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:55:06.490] ubi2:dml_code is mounted. [2025-09-24 10:55:06.490] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:55:06.490] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:55:06.490] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:55:06.490] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:55:06.490] data.LB_FadeInType0=100 [2025-09-24 10:55:06.490] data.CHLH_FadeInType0=0 [2025-09-24 10:55:06.490] data.WU_FadeInDelay=0 [2025-09-24 10:55:06.490] max_time_out=0 [2025-09-24 10:55:06.490] No splash screen [2025-09-24 10:55:06.490] stop dss Done [2025-09-24 10:55:06.538] /dev/mem opened. [2025-09-24 10:55:06.538] Memory mapped at address 0xffffa6d59000. [2025-09-24 10:55:06.570] Read at address 0x00600018 (0xffffa6d59018): 0x00000000 [2025-09-24 10:55:06.570] Write at address 0x00600018 (0xffffa6d59018): 0x00400040, readback 0x00400040 [2025-09-24 10:55:06.570] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:55:06.570] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:55:06.762] Loaded PowerVR consumer services. [2025-09-24 10:55:06.835] 512+0 records in [2025-09-24 10:55:06.835] 512+0 records out [2025-09-24 10:55:06.835] Waiting data available... [2025-09-24 10:55:06.867] Starting syslogd/klogd: done [2025-09-24 10:55:06.883] DML Start [2025-09-24 10:55:07.075] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:55:07.331] DML res1: 0 [2025-09-24 10:55:07.741] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:55:07.741] Read Success [2025-09-24 10:55:07.741] Verifying certificate... [2025-09-24 10:55:07.998] Verified OK [2025-09-24 10:55:07.998] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:55:09.612] Verified OK [2025-09-24 10:55:09.612] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:55:10.251] Verified OK [2025-09-24 10:55:10.251] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:55:12.775] fs.protected_hardlinks = 1 [2025-09-24 10:55:12.775] fs.protected_symlinks = 1 [2025-09-24 10:55:12.775] kernel.modules_disabled = 1 [2025-09-24 10:55:12.950] [2025-09-24 10:55:12.950] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:55:14.419] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:55:22.093] SBL1:1210.0.1.0 [2025-09-24 10:55:22.141] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:55:23.708] SBL2:1210.0.1.0 [2025-09-24 10:55:23.755] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:55:23.852] j-A [2025-09-24 10:55:31.207] The R5 Autosar Classic is running [2025-09-24 10:55:31.231] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:55:31.231] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:55:31.839] INIT: version 2.96 booting [2025-09-24 10:55:31.950] INIT: Entering runlevel: 5 [2025-09-24 10:55:32.095] mtd24 attached [2025-09-24 10:55:32.111] mtd32 attached [2025-09-24 10:55:32.127] mtd28 attached [2025-09-24 10:55:32.175] RTNETLINK answers: File exists [2025-09-24 10:55:32.175] ubi0:textures is mounted. [2025-09-24 10:55:32.235] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:55:32.235] ubi1:dml_code is mounted. [2025-09-24 10:55:32.235] ubi2:animations is mounted. [2025-09-24 10:55:32.235] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:55:32.235] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:55:32.235] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:55:32.235] data.LB_FadeInType0=100 [2025-09-24 10:55:32.235] data.CHLH_FadeInType0=0 [2025-09-24 10:55:32.235] data.WU_FadeInDelay=0 [2025-09-24 10:55:32.235] max_time_out=0 [2025-09-24 10:55:32.235] No splash screen [2025-09-24 10:55:32.235] stop dss Done [2025-09-24 10:55:32.235] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:55:32.282] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:55:32.318] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:55:32.318] /dev/mem opened. [2025-09-24 10:55:32.318] Memory mapped at address 0xffff9ede7000. [2025-09-24 10:55:32.318] Read at address 0x00600018 (0xffff9ede7018): 0x00000000 [2025-09-24 10:55:32.318] Write at address 0x00600018 (0xffff9ede7018): 0x00400040, readback 0x00400040 [2025-09-24 10:55:32.430] Loaded PowerVR consumer services. [2025-09-24 10:55:32.541] 512+0 records in [2025-09-24 10:55:32.541] 512+0 records out [2025-09-24 10:55:32.574] Starting syslogd/klogd: Waiting data available... [2025-09-24 10:55:32.590] done [2025-09-24 10:55:32.590] DML Start [2025-09-24 10:55:32.750] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:55:32.942] DML res1: 0 [2025-09-24 10:55:33.468] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:55:33.468] Read Success [2025-09-24 10:55:33.468] Verifying certificate... [2025-09-24 10:55:33.708] Verified OK [2025-09-24 10:55:33.724] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:55:35.316] Verified OK [2025-09-24 10:55:35.316] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:55:35.972] Verified OK [2025-09-24 10:55:35.972] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:55:38.627] fs.protected_hardlinks = 1 [2025-09-24 10:55:38.642] fs.protected_symlinks = 1 [2025-09-24 10:55:38.642] kernel.modules_disabled = 1 [2025-09-24 10:55:38.850] [2025-09-24 10:55:38.850] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:55:40.102] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:55:47.833] SBL1:1210.0.1.0 [2025-09-24 10:55:47.865] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:55:49.448] SBL2:1210.0.1.0 [2025-09-24 10:55:49.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:55:49.591] j-A [2025-09-24 10:55:56.965] The R5 Autosar Classic is running [2025-09-24 10:55:56.965] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:55:56.965] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:55:57.573] INIT: version 2.96 booting [2025-09-24 10:55:57.684] INIT: Entering runlevel: 5 [2025-09-24 10:55:57.828] mtd24 attached [2025-09-24 10:55:57.861] mtd32 attached [2025-09-24 10:55:57.877] mtd28 attached [2025-09-24 10:55:57.877] ubi0:textures is mounted. [2025-09-24 10:55:57.893] ubi1:dml_code is mounted. [2025-09-24 10:55:57.909] RTNETLINK answers: File exists [2025-09-24 10:55:57.945] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:55:57.945] ubi2:animations is mounted. [2025-09-24 10:55:57.945] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:55:57.945] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:55:57.945] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:55:57.972] data.LB_FadeInType0=100 [2025-09-24 10:55:57.972] data.CHLH_FadeInType0=0 [2025-09-24 10:55:57.972] data.WU_FadeInDelay=0 [2025-09-24 10:55:57.972] max_time_out=0 [2025-09-24 10:55:57.972] No splash screen [2025-09-24 10:55:57.972] stop dss Done [2025-09-24 10:55:57.972] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:55:58.037] /dev/mem opened. [2025-09-24 10:55:58.037] Memory mapped at address 0xffffab22a000. [2025-09-24 10:55:58.037] Read at address 0x00600018 (0xffffab22a018): 0x00000000 [2025-09-24 10:55:58.037] Write at address 0x00600018 (0xffffab22a018): 0x00400040, readback 0x00400040 [2025-09-24 10:55:58.037] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:55:58.069] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:55:58.229] Loaded PowerVR consumer services. [2025-09-24 10:55:58.293] 512+0 records in [2025-09-24 10:55:58.293] 512+0 records out [2025-09-24 10:55:58.309] Starting syslogd/klogd: done [2025-09-24 10:55:58.325] Waiting data available... [2025-09-24 10:55:58.341] DML Start [2025-09-24 10:55:58.517] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:55:58.725] DML res1: 0 [2025-09-24 10:55:59.164] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:55:59.164] Read Success [2025-09-24 10:55:59.164] Verifying certificate... [2025-09-24 10:55:59.404] Verified OK [2025-09-24 10:55:59.420] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:56:01.160] Verified OK [2025-09-24 10:56:01.160] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:56:01.714] Verified OK [2025-09-24 10:56:01.714] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:56:04.400] fs.protected_hardlinks = 1 [2025-09-24 10:56:04.416] fs.protected_symlinks = 1 [2025-09-24 10:56:04.416] kernel.modules_disabled = 1 [2025-09-24 10:56:04.592] [2025-09-24 10:56:04.592] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:56:05.805] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:56:13.568] SBL1:1210.0.1.0 [2025-09-24 10:56:13.600] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:56:15.183] SBL2:1210.0.1.0 [2025-09-24 10:56:15.215] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:56:15.327] j-A [2025-09-24 10:56:22.699] The R5 Autosar Classic is running [2025-09-24 10:56:22.699] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:56:22.699] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:56:23.306] INIT: version 2.96 booting [2025-09-24 10:56:23.401] INIT: Entering runlevel: 5 [2025-09-24 10:56:23.578] mtd28 attached [2025-09-24 10:56:23.578] mtd24 attached [2025-09-24 10:56:23.594] mtd32 attached [2025-09-24 10:56:23.642] RTNETLINK answers: File exists [2025-09-24 10:56:23.642] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:56:23.681] ubi0:animations is mounted. [2025-09-24 10:56:23.681] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:56:23.681] ubi1:textures is mounted. [2025-09-24 10:56:23.681] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:56:23.681] ubi2:dml_code is mounted. [2025-09-24 10:56:23.681] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:56:23.681] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:56:23.707] data.LB_FadeInType0=100 [2025-09-24 10:56:23.707] data.CHLH_FadeInType0=0 [2025-09-24 10:56:23.707] data.WU_FadeInDelay=0 [2025-09-24 10:56:23.707] max_time_out=0 [2025-09-24 10:56:23.707] No splash screen [2025-09-24 10:56:23.707] stop dss Done [2025-09-24 10:56:23.737] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:56:23.737] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:56:23.753] /dev/mem opened. [2025-09-24 10:56:23.779] Memory mapped at address 0xffffac217000. [2025-09-24 10:56:23.779] Read at address 0x00600018 (0xffffac217018): 0x00000000 [2025-09-24 10:56:23.779] Write at address 0x00600018 (0xffffac217018): 0x00400040, readback 0x00400040 [2025-09-24 10:56:23.906] Loaded PowerVR consumer services. [2025-09-24 10:56:24.018] Waiting data available... [2025-09-24 10:56:24.034] 512+0 records in [2025-09-24 10:56:24.034] 512+0 records out [2025-09-24 10:56:24.050] Starting syslogd/klogd: done [2025-09-24 10:56:24.082] DML Start [2025-09-24 10:56:24.243] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:56:24.450] DML res1: 0 [2025-09-24 10:56:24.913] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:56:24.929] Read Success [2025-09-24 10:56:24.929] Verifying certificate... [2025-09-24 10:56:25.154] Verified OK [2025-09-24 10:56:25.170] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:56:26.764] Verified OK [2025-09-24 10:56:26.764] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:56:27.435] Verified OK [2025-09-24 10:56:27.435] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:56:30.122] fs.protected_hardlinks = 1 [2025-09-24 10:56:30.138] fs.protected_symlinks = 1 [2025-09-24 10:56:30.138] kernel.modules_disabled = 1 [2025-09-24 10:56:30.346] [2025-09-24 10:56:30.346] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:56:31.571] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:56:39.288] SBL1:1210.0.1.0 [2025-09-24 10:56:39.336] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:56:40.903] SBL2:1210.0.1.0 [2025-09-24 10:56:40.951] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:56:41.047] j-A [2025-09-24 10:56:48.402] The R5 Autosar Classic is running [2025-09-24 10:56:48.424] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:56:48.424] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:56:49.030] INIT: version 2.96 booting [2025-09-24 10:56:49.143] INIT: Entering runlevel: 5 [2025-09-24 10:56:49.287] mtd24 attached [2025-09-24 10:56:49.302] mtd32 attached [2025-09-24 10:56:49.318] mtd28 attached [2025-09-24 10:56:49.334] ubi0:textures is mounted. [2025-09-24 10:56:49.400] RTNETLINK answers: File exists [2025-09-24 10:56:49.400] ubi1:dml_code is mounted. [2025-09-24 10:56:49.400] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:56:49.400] ubi2:animations is mounted. [2025-09-24 10:56:49.400] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:56:49.400] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:56:49.400] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:56:49.400] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:56:49.400] data.LB_FadeInType0=100 [2025-09-24 10:56:49.421] data.CHLH_FadeInType0=0 [2025-09-24 10:56:49.421] data.WU_FadeInDelay=0 [2025-09-24 10:56:49.421] max_time_out=0 [2025-09-24 10:56:49.421] No splash screen [2025-09-24 10:56:49.421] stop dss Done [2025-09-24 10:56:49.494] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:56:49.495] /dev/mem opened. [2025-09-24 10:56:49.495] Memory mapped at address 0xffff8dda9000. [2025-09-24 10:56:49.495] Read at address 0x00600018 (0xffff8dda9018): 0x00000000 [2025-09-24 10:56:49.495] Write at address 0x00600018 (0xffff8dda9018): 0x00400040, readback 0x00400040 [2025-09-24 10:56:49.495] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:56:49.703] Loaded PowerVR consumer services. [2025-09-24 10:56:49.718] 512+0 records in [2025-09-24 10:56:49.718] 512+0 records out [2025-09-24 10:56:49.750] Starting syslogd/klogd: Waiting data available... [2025-09-24 10:56:49.766] done [2025-09-24 10:56:49.766] DML Start [2025-09-24 10:56:49.942] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:56:50.150] DML res1: 0 [2025-09-24 10:56:50.642] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:56:50.642] Read Success [2025-09-24 10:56:50.642] Verifying certificate... [2025-09-24 10:56:50.899] Verified OK [2025-09-24 10:56:50.915] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:56:52.572] Verified OK [2025-09-24 10:56:52.572] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:56:53.218] Verified OK [2025-09-24 10:56:53.218] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:56:55.808] fs.protected_hardlinks = 1 [2025-09-24 10:56:55.808] fs.protected_symlinks = 1 [2025-09-24 10:56:55.808] kernel.modules_disabled = 1 [2025-09-24 10:56:55.999] [2025-09-24 10:56:55.999] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:56:57.275] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:57:05.034] SBL1:1210.0.1.0 [2025-09-24 10:57:05.065] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:57:06.648] SBL2:1210.0.1.0 [2025-09-24 10:57:06.680] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:57:06.792] j-A [2025-09-24 10:57:14.165] The R5 Autosar Classic is running [2025-09-24 10:57:14.165] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:57:14.165] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:57:14.773] INIT: version 2.96 booting [2025-09-24 10:57:14.884] INIT: Entering runlevel: 5 [2025-09-24 10:57:15.044] mtd32 attached [2025-09-24 10:57:15.044] mtd28 attached [2025-09-24 10:57:15.060] mtd24 attached [2025-09-24 10:57:15.143] ubi1:animations is mounted. [2025-09-24 10:57:15.143] RTNETLINK answers: File exists [2025-09-24 10:57:15.143] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:57:15.143] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:57:15.143] ubi2:textures is mounted. [2025-09-24 10:57:15.143] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:57:15.143] ubi0:dml_code is mounted. [2025-09-24 10:57:15.143] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:57:15.143] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:57:15.167] data.LB_FadeInType0=100 [2025-09-24 10:57:15.167] data.CHLH_FadeInType0=0 [2025-09-24 10:57:15.167] data.WU_FadeInDelay=0 [2025-09-24 10:57:15.167] max_time_out=0 [2025-09-24 10:57:15.167] No splash screen [2025-09-24 10:57:15.167] stop dss Done [2025-09-24 10:57:15.198] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:57:15.215] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:57:15.250] /dev/mem opened. [2025-09-24 10:57:15.250] Memory mapped at address 0xffff921fd000. [2025-09-24 10:57:15.250] Read at address 0x00600018 (0xffff921fd018): 0x00000000 [2025-09-24 10:57:15.250] Write at address 0x00600018 (0xffff921fd018): 0x00400040, readback 0x00400040 [2025-09-24 10:57:15.330] Loaded PowerVR consumer services. [2025-09-24 10:57:15.487] Waiting data available... [2025-09-24 10:57:15.487] 512+0 records in [2025-09-24 10:57:15.487] 512+0 records out [2025-09-24 10:57:15.503] Starting syslogd/klogd: done [2025-09-24 10:57:15.519] DML Start [2025-09-24 10:57:15.711] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:57:15.919] DML res1: 0 [2025-09-24 10:57:16.390] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:57:16.390] Read Success [2025-09-24 10:57:16.390] Verifying certificate... [2025-09-24 10:57:16.630] Verified OK [2025-09-24 10:57:16.646] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:57:18.196] Verified OK [2025-09-24 10:57:18.217] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:57:18.787] Verified OK [2025-09-24 10:57:18.787] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:57:21.650] fs.protected_hardlinks = 1 [2025-09-24 10:57:21.665] fs.protected_symlinks = 1 [2025-09-24 10:57:21.665] kernel.modules_disabled = 1 [2025-09-24 10:57:21.857] [2025-09-24 10:57:21.857] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:57:23.020] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:57:30.752] SBL1:1210.0.1.0 [2025-09-24 10:57:30.800] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:57:32.367] SBL2:1210.0.1.0 [2025-09-24 10:57:32.415] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 10:57:32.511] j-A [2025-09-24 10:57:39.865] The R5 Autosar Classic is running [2025-09-24 10:57:39.891] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:57:39.891] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:57:40.498] INIT: version 2.96 booting [2025-09-24 10:57:40.610] INIT: Entering runlevel: 5 [2025-09-24 10:57:40.770] mtd24 attached [2025-09-24 10:57:40.786] mtd32 attached [2025-09-24 10:57:40.786] mtd28 attached [2025-09-24 10:57:40.834] ubi0:textures is mounted. [2025-09-24 10:57:40.899] RTNETLINK answers: File exists [2025-09-24 10:57:40.899] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:57:40.899] ubi2:animations is mounted. [2025-09-24 10:57:40.899] ubi1:dml_code is mounted. [2025-09-24 10:57:40.899] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:57:40.899] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:57:40.899] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:57:40.899] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:57:40.899] data.LB_FadeInType0=100 [2025-09-24 10:57:40.899] data.CHLH_FadeInType0=0 [2025-09-24 10:57:40.899] data.WU_FadeInDelay=0 [2025-09-24 10:57:40.899] max_time_out=0 [2025-09-24 10:57:40.899] No splash screen [2025-09-24 10:57:40.899] stop dss Done [2025-09-24 10:57:40.964] /dev/mem opened. [2025-09-24 10:57:40.964] Memory mapped at address 0xffff9cfb0000. [2025-09-24 10:57:40.964] Read at address 0x00600018 (0xffff9cfb0018): 0x00000000 [2025-09-24 10:57:40.964] Write at address 0x00600018 (0xffff9cfb0018): 0x00400040, readback 0x00400040 [2025-09-24 10:57:40.964] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:57:40.980] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:57:41.156] Loaded PowerVR consumer services. [2025-09-24 10:57:41.236] Waiting data available... [2025-09-24 10:57:41.236] 512+0 records in [2025-09-24 10:57:41.236] 512+0 records out [2025-09-24 10:57:41.267] Starting syslogd/klogd: done [2025-09-24 10:57:41.283] DML Start [2025-09-24 10:57:41.491] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:57:41.732] DML res1: 0 [2025-09-24 10:57:42.189] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:57:42.189] Read Success [2025-09-24 10:57:42.189] Verifying certificate... [2025-09-24 10:57:42.413] Verified OK [2025-09-24 10:57:42.429] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:57:44.083] Verified OK [2025-09-24 10:57:44.083] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:57:44.754] Verified OK [2025-09-24 10:57:44.754] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:57:47.361] fs.protected_hardlinks = 1 [2025-09-24 10:57:47.377] fs.protected_symlinks = 1 [2025-09-24 10:57:47.377] kernel.modules_disabled = 1 [2025-09-24 10:57:47.585] [2025-09-24 10:57:47.585] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:57:48.775] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:57:56.492] SBL1:1210.0.1.0 [2025-09-24 10:57:56.539] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:57:58.106] SBL2:1210.0.1.0 [2025-09-24 10:57:58.154] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:57:58.250] j-A [2025-09-24 10:58:05.605] The R5 Autosar Classic is running [2025-09-24 10:58:05.605] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:58:05.626] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:58:06.234] INIT: version 2.96 booting [2025-09-24 10:58:06.346] INIT: Entering runlevel: 5 [2025-09-24 10:58:06.506] mtd32 attached [2025-09-24 10:58:06.506] mtd28 attached [2025-09-24 10:58:06.522] mtd24 attached [2025-09-24 10:58:06.538] ubi0:dml_code is mounted. [2025-09-24 10:58:06.570] RTNETLINK answers: File exists [2025-09-24 10:58:06.598] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:58:06.598] ubi1:animations is mounted. [2025-09-24 10:58:06.598] ubi2:textures is mounted. [2025-09-24 10:58:06.598] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:58:06.598] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:58:06.634] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:58:06.634] data.LB_FadeInType0=100 [2025-09-24 10:58:06.634] data.CHLH_FadeInType0=0 [2025-09-24 10:58:06.634] data.WU_FadeInDelay=0 [2025-09-24 10:58:06.634] max_time_out=0 [2025-09-24 10:58:06.634] No splash screen [2025-09-24 10:58:06.634] stop dss Done [2025-09-24 10:58:06.634] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:58:06.701] /dev/mem opened. [2025-09-24 10:58:06.701] Memory mapped at address 0xffffadb37000. [2025-09-24 10:58:06.701] Read at address 0x00600018 (0xffffadb37018): 0x00000000 [2025-09-24 10:58:06.701] Write at address 0x00600018 (0xffffadb37018): 0x00400040, readback 0x00400040 [2025-09-24 10:58:06.701] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:58:06.717] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:58:06.797] Loaded PowerVR consumer services. [2025-09-24 10:58:06.941] Waiting data available... [2025-09-24 10:58:06.941] 512+0 records in [2025-09-24 10:58:06.957] 512+0 records out [2025-09-24 10:58:06.989] Starting syslogd/klogd: done [2025-09-24 10:58:07.021] DML Start [2025-09-24 10:58:07.197] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:58:07.421] DML res1: 0 [2025-09-24 10:58:07.820] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:58:07.836] Read Success [2025-09-24 10:58:07.836] Verifying certificate... [2025-09-24 10:58:08.061] Verified OK [2025-09-24 10:58:08.076] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:58:09.737] Verified OK [2025-09-24 10:58:09.737] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:58:10.366] Verified OK [2025-09-24 10:58:10.366] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:58:12.972] fs.protected_hardlinks = 1 [2025-09-24 10:58:12.988] fs.protected_symlinks = 1 [2025-09-24 10:58:12.988] kernel.modules_disabled = 1 [2025-09-24 10:58:13.179] [2025-09-24 10:58:13.179] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:58:14.521] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:58:22.238] SBL1:1210.0.1.0 [2025-09-24 10:58:22.286] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:58:23.852] SBL2:1210.0.1.0 [2025-09-24 10:58:23.900] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:58:23.996] j-A [2025-09-24 10:58:31.352] The R5 Autosar Classic is running [2025-09-24 10:58:31.352] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:58:31.372] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:58:31.980] INIT: version 2.96 booting [2025-09-24 10:58:32.091] INIT: Entering runlevel: 5 [2025-09-24 10:58:32.236] mtd28 attached [2025-09-24 10:58:32.252] mtd24 attached [2025-09-24 10:58:32.268] mtd32 attached [2025-09-24 10:58:32.284] ubi0:animations is mounted. [2025-09-24 10:58:32.316] ubi1:textures is mounted. [2025-09-24 10:58:32.316] RTNETLINK answers: File exists [2025-09-24 10:58:32.340] ubi2:dml_code is mounted. [2025-09-24 10:58:32.340] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:58:32.340] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:58:32.373] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:58:32.373] data.LB_FadeInType0=100 [2025-09-24 10:58:32.373] data.CHLH_FadeInType0=0 [2025-09-24 10:58:32.373] data.WU_FadeInDelay=0 [2025-09-24 10:58:32.373] max_time_out=0 [2025-09-24 10:58:32.373] No splash screen [2025-09-24 10:58:32.373] stop dss Done [2025-09-24 10:58:32.373] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:58:32.373] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:58:32.421] /dev/mem opened. [2025-09-24 10:58:32.450] Memory mapped at address 0xffffbad09000. [2025-09-24 10:58:32.450] Read at address 0x00600018 (0xffffbad09018): 0x00000000 [2025-09-24 10:58:32.450] Write at address 0x00600018 (0xffffbad09018): 0x00400040, readback 0x00400040 [2025-09-24 10:58:32.466] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:58:32.466] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:58:32.545] Loaded PowerVR consumer services. [2025-09-24 10:58:32.673] 512+0 records in [2025-09-24 10:58:32.673] 512+0 records out [2025-09-24 10:58:32.705] Waiting data available... [2025-09-24 10:58:32.721] Starting syslogd/klogd: done [2025-09-24 10:58:32.737] DML Start [2025-09-24 10:58:32.945] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:58:33.169] DML res1: 0 [2025-09-24 10:58:33.608] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:58:33.608] Read Success [2025-09-24 10:58:33.608] Verifying certificate... [2025-09-24 10:58:33.879] Verified OK [2025-09-24 10:58:33.911] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:58:35.494] Verified OK [2025-09-24 10:58:35.494] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:58:36.086] Verified OK [2025-09-24 10:58:36.086] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:58:38.676] fs.protected_hardlinks = 1 [2025-09-24 10:58:38.691] fs.protected_symlinks = 1 [2025-09-24 10:58:38.691] kernel.modules_disabled = 1 [2025-09-24 10:58:38.883] [2025-09-24 10:58:38.883] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:58:40.241] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:58:47.968] SBL1:1210.0.1.0 [2025-09-24 10:58:48.016] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:58:49.582] SBL2:1210.0.1.0 [2025-09-24 10:58:49.630] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:58:49.726] j-A [2025-09-24 10:58:57.082] The R5 Autosar Classic is running [2025-09-24 10:58:57.082] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:58:57.103] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:58:57.711] INIT: version 2.96 booting [2025-09-24 10:58:57.823] INIT: Entering runlevel: 5 [2025-09-24 10:58:57.982] mtd28 attached [2025-09-24 10:58:57.982] mtd24 attached [2025-09-24 10:58:57.998] mtd32 attached [2025-09-24 10:58:58.046] RTNETLINK answers: File exists [2025-09-24 10:58:58.093] ubi0:animations is mounted. [2025-09-24 10:58:58.093] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:58:58.093] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:58:58.093] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:58:58.093] ubi1:textures is mounted. [2025-09-24 10:58:58.093] ubi2:dml_code is mounted. [2025-09-24 10:58:58.093] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:58:58.093] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:58:58.116] data.LB_FadeInType0=100 [2025-09-24 10:58:58.116] data.CHLH_FadeInType0=0 [2025-09-24 10:58:58.116] data.WU_FadeInDelay=0 [2025-09-24 10:58:58.116] max_time_out=0 [2025-09-24 10:58:58.116] No splash screen [2025-09-24 10:58:58.116] stop dss Done [2025-09-24 10:58:58.144] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:58:58.144] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:58:58.159] /dev/mem opened. [2025-09-24 10:58:58.192] Memory mapped at address 0xffffba331000. [2025-09-24 10:58:58.192] Read at address 0x00600018 (0xffffba331018): 0x00000000 [2025-09-24 10:58:58.192] Write at address 0x00600018 (0xffffba331018): 0x00400040, readback 0x00400040 [2025-09-24 10:58:58.273] Loaded PowerVR consumer services. [2025-09-24 10:58:58.432] 512+0 records in [2025-09-24 10:58:58.454] 512+0 records out [2025-09-24 10:58:58.454] Waiting data available... [2025-09-24 10:58:58.486] Starting syslogd/klogd: done [2025-09-24 10:58:58.502] DML Start [2025-09-24 10:58:58.710] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:58:58.918] DML res1: 0 [2025-09-24 10:58:59.357] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:58:59.357] Read Success [2025-09-24 10:58:59.357] Verifying certificate... [2025-09-24 10:58:59.613] Verified OK [2025-09-24 10:58:59.645] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:59:01.349] Verified OK [2025-09-24 10:59:01.349] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:59:01.904] Verified OK [2025-09-24 10:59:01.904] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:59:04.415] fs.protected_hardlinks = 1 [2025-09-24 10:59:04.415] fs.protected_symlinks = 1 [2025-09-24 10:59:04.430] kernel.modules_disabled = 1 [2025-09-24 10:59:04.623] [2025-09-24 10:59:04.623] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:59:06.007] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:59:13.694] SBL1:1210.0.1.0 [2025-09-24 10:59:13.726] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:59:15.308] SBL2:1210.0.1.0 [2025-09-24 10:59:15.341] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:59:15.453] j-A [2025-09-24 10:59:22.793] The R5 Autosar Classic is running [2025-09-24 10:59:22.825] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:59:22.825] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:59:23.432] INIT: version 2.96 booting [2025-09-24 10:59:23.544] INIT: Entering runlevel: 5 [2025-09-24 10:59:23.688] mtd24 attached [2025-09-24 10:59:23.703] mtd28 attached [2025-09-24 10:59:23.719] mtd32 attached [2025-09-24 10:59:23.751] ubi0:textures is mounted. [2025-09-24 10:59:23.767] RTNETLINK answers: File exists [2025-09-24 10:59:23.767] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:59:23.819] ubi1:animations is mounted. [2025-09-24 10:59:23.819] ubi2:dml_code is mounted. [2025-09-24 10:59:23.819] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:59:23.819] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:59:23.819] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:59:23.819] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:59:23.819] data.LB_FadeInType0=100 [2025-09-24 10:59:23.819] data.CHLH_FadeInType0=0 [2025-09-24 10:59:23.819] data.WU_FadeInDelay=0 [2025-09-24 10:59:23.819] max_time_out=0 [2025-09-24 10:59:23.819] No splash screen [2025-09-24 10:59:23.819] stop dss Done [2025-09-24 10:59:23.908] /dev/mem opened. [2025-09-24 10:59:23.908] Memory mapped at address 0xffff91241000. [2025-09-24 10:59:23.908] Read at address 0x00600018 (0xffff91241018): 0x00000000 [2025-09-24 10:59:23.908] Write at address 0x00600018 (0xffff91241018): 0x00400040, readback 0x00400040 [2025-09-24 10:59:23.908] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:59:23.908] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:59:24.004] Loaded PowerVR consumer services. [2025-09-24 10:59:24.156] Waiting data available... [2025-09-24 10:59:24.156] 512+0 records in [2025-09-24 10:59:24.156] 512+0 records out [2025-09-24 10:59:24.173] Starting syslogd/klogd: done [2025-09-24 10:59:24.189] DML Start [2025-09-24 10:59:24.396] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:59:24.588] DML res1: 0 [2025-09-24 10:59:25.082] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:59:25.082] Read Success [2025-09-24 10:59:25.082] Verifying certificate... [2025-09-24 10:59:25.338] Verified OK [2025-09-24 10:59:25.354] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:59:27.103] Verified OK [2025-09-24 10:59:27.103] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:59:27.689] Verified OK [2025-09-24 10:59:27.689] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:59:30.103] fs.protected_hardlinks = 1 [2025-09-24 10:59:30.133] fs.protected_symlinks = 1 [2025-09-24 10:59:30.133] kernel.modules_disabled = 1 [2025-09-24 10:59:30.309] [2025-09-24 10:59:30.309] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:59:31.698] RTNETLINK answers: Cannot assign requested address [2025-09-24 10:59:39.435] SBL1:1210.0.1.0 [2025-09-24 10:59:39.467] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:59:41.049] SBL2:1210.0.1.0 [2025-09-24 10:59:41.081] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 10:59:41.194] j-A [2025-09-24 10:59:48.533] The R5 Autosar Classic is running [2025-09-24 10:59:48.558] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 10:59:48.558] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 10:59:49.166] INIT: version 2.96 booting [2025-09-24 10:59:49.278] INIT: Entering runlevel: 5 [2025-09-24 10:59:49.438] mtd28 attached [2025-09-24 10:59:49.438] mtd24 attached [2025-09-24 10:59:49.454] mtd32 attached [2025-09-24 10:59:49.502] ubi0:animations is mounted. [2025-09-24 10:59:49.502] ubi1:textures is mounted. [2025-09-24 10:59:49.518] RTNETLINK answers: File exists [2025-09-24 10:59:49.518] ubi2:dml_code is mounted. [2025-09-24 10:59:49.571] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 10:59:49.571] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 10:59:49.571] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 10:59:49.571] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 10:59:49.571] data.LB_FadeInType0=100 [2025-09-24 10:59:49.571] data.CHLH_FadeInType0=0 [2025-09-24 10:59:49.571] data.WU_FadeInDelay=0 [2025-09-24 10:59:49.571] max_time_out=0 [2025-09-24 10:59:49.571] No splash screen [2025-09-24 10:59:49.571] stop dss Done [2025-09-24 10:59:49.571] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 10:59:49.623] /dev/mem opened. [2025-09-24 10:59:49.623] Memory mapped at address 0xffff83e5d000. [2025-09-24 10:59:49.623] Read at address 0x00600018 (0xffff83e5d018): 0x00000000 [2025-09-24 10:59:49.623] Write at address 0x00600018 (0xffff83e5d018): 0x00400040, readback 0x00400040 [2025-09-24 10:59:49.623] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 10:59:49.639] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 10:59:49.735] Loaded PowerVR consumer services. [2025-09-24 10:59:49.893] Waiting data available... [2025-09-24 10:59:49.893] 512+0 records in [2025-09-24 10:59:49.893] 512+0 records out [2025-09-24 10:59:49.909] Starting syslogd/klogd: done [2025-09-24 10:59:49.925] DML Start [2025-09-24 10:59:50.116] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 10:59:50.293] DML res1: 0 [2025-09-24 10:59:50.756] Read DML Algo certificate (mtd31) and save to file [2025-09-24 10:59:50.777] Read Success [2025-09-24 10:59:50.777] Verifying certificate... [2025-09-24 10:59:51.002] Verified OK [2025-09-24 10:59:51.018] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 10:59:52.552] Verified OK [2025-09-24 10:59:52.552] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 10:59:53.143] Verified OK [2025-09-24 10:59:53.143] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 10:59:55.957] fs.protected_hardlinks = 1 [2025-09-24 10:59:55.973] fs.protected_symlinks = 1 [2025-09-24 10:59:55.988] kernel.modules_disabled = 1 [2025-09-24 10:59:56.181] [2025-09-24 10:59:56.181] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 10:59:57.418] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:00:05.142] SBL1:1210.0.1.0 [2025-09-24 11:00:05.191] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:00:06.774] SBL2:1210.0.1.0 [2025-09-24 11:00:06.806] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:00:06.917] j-A [2025-09-24 11:00:14.257] The R5 Autosar Classic is running [2025-09-24 11:00:14.282] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:00:14.282] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:00:14.890] INIT: version 2.96 booting [2025-09-24 11:00:15.002] INIT: Entering runlevel: 5 [2025-09-24 11:00:15.161] mtd32 attached [2025-09-24 11:00:15.161] mtd24 attached [2025-09-24 11:00:15.177] mtd28 attached [2025-09-24 11:00:15.226] ubi0:dml_code is mounted. [2025-09-24 11:00:15.226] RTNETLINK answers: File exists [2025-09-24 11:00:15.264] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:00:15.264] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:00:15.264] ubi1:textures is mounted. [2025-09-24 11:00:15.264] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:00:15.264] ubi2:animations is mounted. [2025-09-24 11:00:15.264] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:00:15.264] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:00:15.289] data.LB_FadeInType0=100 [2025-09-24 11:00:15.289] data.CHLH_FadeInType0=0 [2025-09-24 11:00:15.289] data.WU_FadeInDelay=0 [2025-09-24 11:00:15.289] max_time_out=0 [2025-09-24 11:00:15.289] No splash screen [2025-09-24 11:00:15.289] stop dss Done [2025-09-24 11:00:15.305] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:00:15.321] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:00:15.362] /dev/mem opened. [2025-09-24 11:00:15.362] Memory mapped at address 0xffff8ef57000. [2025-09-24 11:00:15.362] Read at address 0x00600018 (0xffff8ef57018): 0x00000000 [2025-09-24 11:00:15.362] Write at address 0x00600018 (0xffff8ef57018): 0x00400040, readback 0x00400040 [2025-09-24 11:00:15.473] Loaded PowerVR consumer services. [2025-09-24 11:00:15.602] Waiting data available... [2025-09-24 11:00:15.602] 512+0 records in [2025-09-24 11:00:15.618] 512+0 records out [2025-09-24 11:00:15.650] Starting syslogd/klogd: done [2025-09-24 11:00:15.665] DML Start [2025-09-24 11:00:15.858] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:00:16.082] DML res1: 0 [2025-09-24 11:00:16.507] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:00:16.507] Read Success [2025-09-24 11:00:16.507] Verifying certificate... [2025-09-24 11:00:16.763] Verified OK [2025-09-24 11:00:16.779] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:00:18.438] Verified OK [2025-09-24 11:00:18.438] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:00:19.014] Verified OK [2025-09-24 11:00:19.014] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:00:21.716] fs.protected_hardlinks = 1 [2025-09-24 11:00:21.732] fs.protected_symlinks = 1 [2025-09-24 11:00:21.732] kernel.modules_disabled = 1 [2025-09-24 11:00:21.939] [2025-09-24 11:00:21.939] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:00:23.161] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:00:30.902] SBL1:1210.0.1.0 [2025-09-24 11:00:30.934] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:00:32.516] SBL2:1210.0.1.0 [2025-09-24 11:00:32.548] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:00:32.661] j-A [2025-09-24 11:00:40.000] The R5 Autosar Classic is running [2025-09-24 11:00:40.025] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:00:40.025] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:00:40.633] INIT: version 2.96 booting [2025-09-24 11:00:40.745] INIT: Entering runlevel: 5 [2025-09-24 11:00:40.905] mtd24 attached [2025-09-24 11:00:40.905] mtd32 attached [2025-09-24 11:00:40.921] mtd28 attached [2025-09-24 11:00:40.953] ubi0:textures is mounted. [2025-09-24 11:00:40.969] RTNETLINK answers: File exists [2025-09-24 11:00:41.029] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:00:41.029] ubi2:animations is mounted. [2025-09-24 11:00:41.029] ubi1:dml_code is mounted. [2025-09-24 11:00:41.029] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:00:41.029] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:00:41.029] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:00:41.029] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:00:41.029] data.LB_FadeInType0=100 [2025-09-24 11:00:41.029] data.CHLH_FadeInType0=0 [2025-09-24 11:00:41.029] data.WU_FadeInDelay=0 [2025-09-24 11:00:41.029] max_time_out=0 [2025-09-24 11:00:41.029] No splash screen [2025-09-24 11:00:41.029] stop dss Done [2025-09-24 11:00:41.123] /dev/mem opened. [2025-09-24 11:00:41.123] Memory mapped at address 0xffffb6690000. [2025-09-24 11:00:41.123] Read at address 0x00600018 (0xffffb6690018): 0x00000000 [2025-09-24 11:00:41.123] Write at address 0x00600018 (0xffffb6690018): 0x00400040, readback 0x00400040 [2025-09-24 11:00:41.123] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:00:41.123] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:00:41.314] Loaded PowerVR consumer services. [2025-09-24 11:00:41.346] 512+0 records in [2025-09-24 11:00:41.362] 512+0 records out [2025-09-24 11:00:41.395] Waiting data available... [2025-09-24 11:00:41.411] Starting syslogd/klogd: done [2025-09-24 11:00:41.427] DML Start [2025-09-24 11:00:41.635] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:00:41.826] DML res1: 0 [2025-09-24 11:00:42.259] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:00:42.274] Read Success [2025-09-24 11:00:42.274] Verifying certificate... [2025-09-24 11:00:42.530] Verified OK [2025-09-24 11:00:42.546] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:00:44.152] Verified OK [2025-09-24 11:00:44.152] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:00:44.759] Verified OK [2025-09-24 11:00:44.759] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:00:47.382] fs.protected_hardlinks = 1 [2025-09-24 11:00:47.382] fs.protected_symlinks = 1 [2025-09-24 11:00:47.397] kernel.modules_disabled = 1 [2025-09-24 11:00:47.590] [2025-09-24 11:00:47.590] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:00:48.920] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:00:56.615] SBL1:1210.0.1.0 [2025-09-24 11:00:56.663] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:00:58.246] SBL2:1210.0.1.0 [2025-09-24 11:00:58.278] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:00:58.390] j-A [2025-09-24 11:01:05.730] The R5 Autosar Classic is running [2025-09-24 11:01:05.755] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:01:05.755] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:01:06.362] INIT: version 2.96 booting [2025-09-24 11:01:06.474] INIT: Entering runlevel: 5 [2025-09-24 11:01:06.635] mtd28 attached [2025-09-24 11:01:06.635] mtd24 attached [2025-09-24 11:01:06.651] mtd32 attached [2025-09-24 11:01:06.767] RTNETLINK answers: File exists [2025-09-24 11:01:06.767] ubi1:textures is mounted. [2025-09-24 11:01:06.767] ubi0:animations is mounted. [2025-09-24 11:01:06.767] ubi2:dml_code is mounted. [2025-09-24 11:01:06.767] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:01:06.767] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:01:06.767] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:01:06.767] data.LB_FadeInType0=100 [2025-09-24 11:01:06.767] data.CHLH_FadeInType0=0 [2025-09-24 11:01:06.767] data.WU_FadeInDelay=0 [2025-09-24 11:01:06.767] max_time_out=0 [2025-09-24 11:01:06.767] No splash screen [2025-09-24 11:01:06.767] stop dss Done [2025-09-24 11:01:06.767] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:01:06.767] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:01:06.835] /dev/mem opened. [2025-09-24 11:01:06.835] Memory mapped at address 0xffffaea00000. [2025-09-24 11:01:06.835] Read at address 0x00600018 (0xffffaea00018): 0x00000000 [2025-09-24 11:01:06.835] Write at address 0x00600018 (0xffffaea00018): 0x00400040, readback 0x00400040 [2025-09-24 11:01:06.867] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:01:06.882] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:01:07.059] Loaded PowerVR consumer services. [2025-09-24 11:01:07.107] 512+0 records in [2025-09-24 11:01:07.107] 512+0 records out [2025-09-24 11:01:07.123] Waiting data available... [2025-09-24 11:01:07.138] Starting syslogd/klogd: done [2025-09-24 11:01:07.154] DML Start [2025-09-24 11:01:07.331] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:01:07.554] DML res1: 0 [2025-09-24 11:01:08.029] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:01:08.029] Read Success [2025-09-24 11:01:08.029] Verifying certificate... [2025-09-24 11:01:08.301] Verified OK [2025-09-24 11:01:08.301] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:01:09.885] Verified OK [2025-09-24 11:01:09.885] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:01:10.492] Verified OK [2025-09-24 11:01:10.492] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:01:13.179] fs.protected_hardlinks = 1 [2025-09-24 11:01:13.195] fs.protected_symlinks = 1 [2025-09-24 11:01:13.195] kernel.modules_disabled = 1 [2025-09-24 11:01:13.419] [2025-09-24 11:01:13.419] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:01:14.664] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:01:22.372] SBL1:1210.0.1.0 [2025-09-24 11:01:22.404] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:01:23.988] SBL2:1210.0.1.0 [2025-09-24 11:01:24.019] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:01:24.131] j-A [2025-09-24 11:01:31.502] The R5 Autosar Classic is running [2025-09-24 11:01:31.502] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:01:31.502] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:01:32.110] INIT: version 2.96 booting [2025-09-24 11:01:32.222] INIT: Entering runlevel: 5 [2025-09-24 11:01:32.382] mtd28 attached [2025-09-24 11:01:32.382] mtd24 attached [2025-09-24 11:01:32.398] mtd32 attached [2025-09-24 11:01:32.445] RTNETLINK answers: File exists [2025-09-24 11:01:32.445] ubi0:animations is mounted. [2025-09-24 11:01:32.488] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:01:32.488] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:01:32.488] ubi1:textures is mounted. [2025-09-24 11:01:32.488] ubi2:dml_code is mounted. [2025-09-24 11:01:32.488] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:01:32.488] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:01:32.488] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:01:32.488] data.LB_FadeInType0=100 [2025-09-24 11:01:32.509] data.CHLH_FadeInType0=0 [2025-09-24 11:01:32.509] data.WU_FadeInDelay=0 [2025-09-24 11:01:32.509] max_time_out=0 [2025-09-24 11:01:32.509] No splash screen [2025-09-24 11:01:32.509] stop dss Done [2025-09-24 11:01:32.558] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:01:32.597] /dev/mem opened. [2025-09-24 11:01:32.597] Memory mapped at address 0xffff92e63000. [2025-09-24 11:01:32.597] Read at address 0x00600018 (0xffff92e63018): 0x00000000 [2025-09-24 11:01:32.597] Write at address 0x00600018 (0xffff92e63018): 0x00400040, readback 0x00400040 [2025-09-24 11:01:32.597] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:01:32.821] Loaded PowerVR consumer services. [2025-09-24 11:01:32.853] Waiting data available... [2025-09-24 11:01:32.868] 512+0 records in [2025-09-24 11:01:32.868] 512+0 records out [2025-09-24 11:01:32.900] Starting syslogd/klogd: done [2025-09-24 11:01:32.916] DML Start [2025-09-24 11:01:33.076] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:01:33.300] DML res1: 0 [2025-09-24 11:01:33.821] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:01:33.821] Read Success [2025-09-24 11:01:33.821] Verifying certificate... [2025-09-24 11:01:34.093] Verified OK [2025-09-24 11:01:34.125] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:01:35.731] Verified OK [2025-09-24 11:01:35.731] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:01:36.354] Verified OK [2025-09-24 11:01:36.354] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:01:38.961] fs.protected_hardlinks = 1 [2025-09-24 11:01:38.961] fs.protected_symlinks = 1 [2025-09-24 11:01:38.977] kernel.modules_disabled = 1 [2025-09-24 11:01:39.185] [2025-09-24 11:01:39.185] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:01:40.475] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:01:48.098] SBL1:1210.0.1.0 [2025-09-24 11:01:48.130] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:01:49.712] SBL2:1210.0.1.0 [2025-09-24 11:01:49.745] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:01:49.856] j-A [2025-09-24 11:01:57.195] The R5 Autosar Classic is running [2025-09-24 11:01:57.226] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:01:57.226] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:01:57.833] INIT: version 2.96 booting [2025-09-24 11:01:57.946] INIT: Entering runlevel: 5 [2025-09-24 11:01:58.089] mtd24 attached [2025-09-24 11:01:58.105] mtd28 attached [2025-09-24 11:01:58.121] mtd32 attached [2025-09-24 11:01:58.153] ubi0:textures is mounted. [2025-09-24 11:01:58.169] RTNETLINK answers: File exists [2025-09-24 11:01:58.169] ubi1:animations is mounted. [2025-09-24 11:01:58.225] ubi2:dml_code is mounted. [2025-09-24 11:01:58.225] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:01:58.225] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:01:58.225] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:01:58.225] data.LB_FadeInType0=100 [2025-09-24 11:01:58.225] data.CHLH_FadeInType0=0 [2025-09-24 11:01:58.225] data.WU_FadeInDelay=0 [2025-09-24 11:01:58.225] max_time_out=0 [2025-09-24 11:01:58.225] No splash screen [2025-09-24 11:01:58.225] stop dss Done [2025-09-24 11:01:58.225] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:01:58.225] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:01:58.257] /dev/mem opened. [2025-09-24 11:01:58.289] Memory mapped at address 0xffff9f322000. [2025-09-24 11:01:58.289] Read at address 0x00600018 (0xffff9f322018): 0x00000000 [2025-09-24 11:01:58.289] Write at address 0x00600018 (0xffff9f322018): 0x00400040, readback 0x00400040 [2025-09-24 11:01:58.305] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:01:58.337] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:01:58.529] Loaded PowerVR consumer services. [2025-09-24 11:01:58.592] 512+0 records in [2025-09-24 11:01:58.592] 512+0 records out [2025-09-24 11:01:58.592] Waiting data available... [2025-09-24 11:01:58.608] Starting syslogd/klogd: done [2025-09-24 11:01:58.624] DML Start [2025-09-24 11:01:58.799] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:01:59.023] DML res1: 0 [2025-09-24 11:01:59.435] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:01:59.435] Read Success [2025-09-24 11:01:59.435] Verifying certificate... [2025-09-24 11:01:59.675] Verified OK [2025-09-24 11:01:59.691] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:02:01.418] Verified OK [2025-09-24 11:02:01.418] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:02:02.057] Verified OK [2025-09-24 11:02:02.057] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:02:04.712] fs.protected_hardlinks = 1 [2025-09-24 11:02:04.712] fs.protected_symlinks = 1 [2025-09-24 11:02:04.727] kernel.modules_disabled = 1 [2025-09-24 11:02:04.920] [2025-09-24 11:02:04.920] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:02:06.086] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:02:13.822] SBL1:1210.0.1.0 [2025-09-24 11:02:13.870] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:02:15.437] SBL2:1210.0.1.0 [2025-09-24 11:02:15.468] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:02:15.580] j-A [2025-09-24 11:02:22.936] The R5 Autosar Classic is running [2025-09-24 11:02:22.936] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:02:22.957] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:02:23.564] INIT: version 2.96 booting [2025-09-24 11:02:23.675] INIT: Entering runlevel: 5 [2025-09-24 11:02:23.836] mtd24 attached [2025-09-24 11:02:23.836] mtd28 attached [2025-09-24 11:02:23.852] mtd32 attached [2025-09-24 11:02:23.900] RTNETLINK answers: File exists [2025-09-24 11:02:23.948] ubi1:animations is mounted. [2025-09-24 11:02:23.948] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:02:23.948] ubi0:textures is mounted. [2025-09-24 11:02:23.948] ubi2:dml_code is mounted. [2025-09-24 11:02:23.948] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:02:23.948] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:02:23.948] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:02:23.948] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:02:23.971] data.LB_FadeInType0=100 [2025-09-24 11:02:23.971] data.CHLH_FadeInType0=0 [2025-09-24 11:02:23.971] data.WU_FadeInDelay=0 [2025-09-24 11:02:23.971] max_time_out=0 [2025-09-24 11:02:23.971] No splash screen [2025-09-24 11:02:23.971] stop dss Done [2025-09-24 11:02:24.012] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:02:24.012] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:02:24.052] /dev/mem opened. [2025-09-24 11:02:24.052] Memory mapped at address 0xffffbc572000. [2025-09-24 11:02:24.052] Read at address 0x00600018 (0xffffbc572018): 0x00000000 [2025-09-24 11:02:24.052] Write at address 0x00600018 (0xffffbc572018): 0x00400040, readback 0x00400040 [2025-09-24 11:02:24.115] Loaded PowerVR consumer services. [2025-09-24 11:02:24.297] 512+0 records in [2025-09-24 11:02:24.297] 512+0 records out [2025-09-24 11:02:24.297] Waiting data available... [2025-09-24 11:02:24.330] Starting syslogd/klogd: done [2025-09-24 11:02:24.362] DML Start [2025-09-24 11:02:24.553] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:02:24.777] DML res1: 0 [2025-09-24 11:02:25.182] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:02:25.182] Read Success [2025-09-24 11:02:25.182] Verifying certificate... [2025-09-24 11:02:25.486] Verified OK [2025-09-24 11:02:25.502] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:02:27.176] Verified OK [2025-09-24 11:02:27.176] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:02:27.782] Verified OK [2025-09-24 11:02:27.782] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:02:30.452] fs.protected_hardlinks = 1 [2025-09-24 11:02:30.452] fs.protected_symlinks = 1 [2025-09-24 11:02:30.469] kernel.modules_disabled = 1 [2025-09-24 11:02:30.660] [2025-09-24 11:02:30.660] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:02:31.856] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:02:39.532] SBL1:1210.0.1.0 [2025-09-24 11:02:39.580] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:02:41.147] SBL2:1210.0.1.0 [2025-09-24 11:02:41.194] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:02:41.291] j-A [2025-09-24 11:02:48.646] The R5 Autosar Classic is running [2025-09-24 11:02:48.668] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:02:48.668] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:02:49.275] INIT: version 2.96 booting [2025-09-24 11:02:49.387] INIT: Entering runlevel: 5 [2025-09-24 11:02:49.548] mtd32 attached [2025-09-24 11:02:49.548] mtd28 attached [2025-09-24 11:02:49.563] mtd24 attached [2025-09-24 11:02:49.595] RTNETLINK answers: File exists [2025-09-24 11:02:49.611] ubi0:dml_code is mounted. [2025-09-24 11:02:49.667] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:02:49.667] ubi1:animations is mounted. [2025-09-24 11:02:49.667] ubi2:textures is mounted. [2025-09-24 11:02:49.667] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:02:49.667] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:02:49.667] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:02:49.667] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:02:49.667] data.LB_FadeInType0=100 [2025-09-24 11:02:49.667] data.CHLH_FadeInType0=0 [2025-09-24 11:02:49.667] data.WU_FadeInDelay=0 [2025-09-24 11:02:49.667] max_time_out=0 [2025-09-24 11:02:49.667] No splash screen [2025-09-24 11:02:49.667] stop dss Done [2025-09-24 11:02:49.715] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:02:49.756] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:02:49.756] /dev/mem opened. [2025-09-24 11:02:49.756] Memory mapped at address 0xffffa5c31000. [2025-09-24 11:02:49.756] Read at address 0x00600018 (0xffffa5c31018): 0x00000000 [2025-09-24 11:02:49.756] Write at address 0x00600018 (0xffffa5c31018): 0x00400040, readback 0x00400040 [2025-09-24 11:02:49.948] Loaded PowerVR consumer services. [2025-09-24 11:02:49.996] 512+0 records in [2025-09-24 11:02:49.996] 512+0 records out [2025-09-24 11:02:50.028] Waiting data available... [2025-09-24 11:02:50.044] Starting syslogd/klogd: done [2025-09-24 11:02:50.060] DML Start [2025-09-24 11:02:50.219] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:02:50.428] DML res1: 0 [2025-09-24 11:02:50.916] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:02:50.916] Read Success [2025-09-24 11:02:50.916] Verifying certificate... [2025-09-24 11:02:51.172] Verified OK [2025-09-24 11:02:51.188] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:02:52.923] Verified OK [2025-09-24 11:02:52.923] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:02:53.530] Verified OK [2025-09-24 11:02:53.530] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:02:56.057] fs.protected_hardlinks = 1 [2025-09-24 11:02:56.073] fs.protected_symlinks = 1 [2025-09-24 11:02:56.073] kernel.modules_disabled = 1 [2025-09-24 11:02:56.264] [2025-09-24 11:02:56.264] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:02:57.545] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:03:05.263] SBL1:1210.0.1.0 [2025-09-24 11:03:05.294] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:03:06.878] SBL2:1210.0.1.0 [2025-09-24 11:03:06.910] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:03:07.022] j-A [2025-09-24 11:03:14.395] The R5 Autosar Classic is running [2025-09-24 11:03:14.395] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:03:14.395] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:03:15.003] INIT: version 2.96 booting [2025-09-24 11:03:15.115] INIT: Entering runlevel: 5 [2025-09-24 11:03:15.275] mtd28 attached [2025-09-24 11:03:15.275] mtd32 attached [2025-09-24 11:03:15.291] mtd24 attached [2025-09-24 11:03:15.339] RTNETLINK answers: File exists [2025-09-24 11:03:15.405] ubi2:textures is mounted. [2025-09-24 11:03:15.405] ubi1:dml_code is mounted. [2025-09-24 11:03:15.405] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:03:15.405] ubi0:animations is mounted. [2025-09-24 11:03:15.405] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:03:15.405] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:03:15.405] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:03:15.405] data.LB_FadeInType0=100 [2025-09-24 11:03:15.405] data.CHLH_FadeInType0=0 [2025-09-24 11:03:15.405] data.WU_FadeInDelay=0 [2025-09-24 11:03:15.405] max_time_out=0 [2025-09-24 11:03:15.405] No splash screen [2025-09-24 11:03:15.405] stop dss Done [2025-09-24 11:03:15.405] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:03:15.437] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:03:15.477] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:03:15.477] /dev/mem opened. [2025-09-24 11:03:15.477] Memory mapped at address 0xffff83d95000. [2025-09-24 11:03:15.477] Read at address 0x00600018 (0xffff83d95018): 0x00000000 [2025-09-24 11:03:15.477] Write at address 0x00600018 (0xffff83d95018): 0x00400040, readback 0x00400040 [2025-09-24 11:03:15.739] Loaded PowerVR consumer services. [2025-09-24 11:03:15.739] Waiting data available... [2025-09-24 11:03:15.770] 512+0 records in [2025-09-24 11:03:15.770] 512+0 records out [2025-09-24 11:03:15.802] Starting syslogd/klogd: done [2025-09-24 11:03:15.818] DML Start [2025-09-24 11:03:16.010] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:03:16.219] DML res1: 0 [2025-09-24 11:03:16.666] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:03:16.682] Read Success [2025-09-24 11:03:16.682] Verifying certificate... [2025-09-24 11:03:16.921] Verified OK [2025-09-24 11:03:16.937] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:03:18.613] Verified OK [2025-09-24 11:03:18.614] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:03:19.186] Verified OK [2025-09-24 11:03:19.186] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:03:21.777] fs.protected_hardlinks = 1 [2025-09-24 11:03:21.793] fs.protected_symlinks = 1 [2025-09-24 11:03:21.793] kernel.modules_disabled = 1 [2025-09-24 11:03:21.984] [2025-09-24 11:03:21.984] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:03:23.311] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:03:30.974] SBL1:1210.0.1.0 [2025-09-24 11:03:31.022] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:03:32.589] SBL2:1210.0.1.0 [2025-09-24 11:03:32.637] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:03:32.733] j-A [2025-09-24 11:03:40.088] The R5 Autosar Classic is running [2025-09-24 11:03:40.111] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:03:40.111] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:03:40.719] INIT: version 2.96 booting [2025-09-24 11:03:40.830] INIT: Entering runlevel: 5 [2025-09-24 11:03:40.975] mtd24 attached [2025-09-24 11:03:40.991] mtd32 attached [2025-09-24 11:03:41.007] mtd28 attached [2025-09-24 11:03:41.039] ubi0:textures is mounted. [2025-09-24 11:03:41.055] RTNETLINK answers: File exists [2025-09-24 11:03:41.055] ubi1:dml_code is mounted. [2025-09-24 11:03:41.090] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:03:41.090] ubi2:animations is mounted. [2025-09-24 11:03:41.090] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:03:41.090] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:03:41.090] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:03:41.090] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:03:41.090] data.LB_FadeInType0=100 [2025-09-24 11:03:41.111] data.CHLH_FadeInType0=0 [2025-09-24 11:03:41.111] data.WU_FadeInDelay=0 [2025-09-24 11:03:41.111] max_time_out=0 [2025-09-24 11:03:41.111] No splash screen [2025-09-24 11:03:41.111] stop dss Done [2025-09-24 11:03:41.177] /dev/mem opened. [2025-09-24 11:03:41.177] Memory mapped at address 0xffffaca28000. [2025-09-24 11:03:41.177] Read at address 0x00600018 (0xffffaca28018): 0x00000000 [2025-09-24 11:03:41.177] Write at address 0x00600018 (0xffffaca28018): 0x00400040, readback 0x00400040 [2025-09-24 11:03:41.177] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:03:41.210] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:03:41.337] Loaded PowerVR consumer services. [2025-09-24 11:03:41.433] Waiting data available... [2025-09-24 11:03:41.450] 512+0 records in [2025-09-24 11:03:41.450] 512+0 records out [2025-09-24 11:03:41.481] Starting syslogd/klogd: done [2025-09-24 11:03:41.497] DML Start [2025-09-24 11:03:41.657] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:03:41.849] DML res1: 0 [2025-09-24 11:03:42.345] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:03:42.366] Read Success [2025-09-24 11:03:42.366] Verifying certificate... [2025-09-24 11:03:42.589] Verified OK [2025-09-24 11:03:42.605] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:03:44.317] Verified OK [2025-09-24 11:03:44.333] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:03:44.924] Verified OK [2025-09-24 11:03:44.924] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:03:47.578] fs.protected_hardlinks = 1 [2025-09-24 11:03:47.578] fs.protected_symlinks = 1 [2025-09-24 11:03:47.594] kernel.modules_disabled = 1 [2025-09-24 11:03:47.786] [2025-09-24 11:03:47.786] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:03:48.965] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:03:56.701] SBL1:1210.0.1.0 [2025-09-24 11:03:56.749] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:03:58.316] SBL2:1210.0.1.0 [2025-09-24 11:03:58.364] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:03:58.460] j-A [2025-09-24 11:04:05.816] The R5 Autosar Classic is running [2025-09-24 11:04:05.839] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:04:05.839] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:04:06.446] INIT: version 2.96 booting [2025-09-24 11:04:06.558] INIT: Entering runlevel: 5 [2025-09-24 11:04:06.718] mtd24 attached [2025-09-24 11:04:06.734] mtd28 attached [2025-09-24 11:04:06.750] mtd32 attached [2025-09-24 11:04:06.782] ubi0:textures is mounted. [2025-09-24 11:04:06.798] RTNETLINK answers: File exists [2025-09-24 11:04:06.854] ubi1:animations is mounted. [2025-09-24 11:04:06.854] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:04:06.854] ubi2:dml_code is mounted. [2025-09-24 11:04:06.854] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:04:06.854] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:04:06.854] data.LB_FadeInType0=100 [2025-09-24 11:04:06.854] data.CHLH_FadeInType0=0 [2025-09-24 11:04:06.854] data.WU_FadeInDelay=0 [2025-09-24 11:04:06.854] max_time_out=0 [2025-09-24 11:04:06.854] No splash screen [2025-09-24 11:04:06.854] stop dss Done [2025-09-24 11:04:06.854] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:04:06.854] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:04:06.935] /dev/mem opened. [2025-09-24 11:04:06.935] Memory mapped at address 0xffff85adf000. [2025-09-24 11:04:06.935] Read at address 0x00600018 (0xffff85adf018): 0x00000000 [2025-09-24 11:04:06.935] Write at address 0x00600018 (0xffff85adf018): 0x00400040, readback 0x00400040 [2025-09-24 11:04:06.935] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:04:06.951] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:04:07.127] Loaded PowerVR consumer services. [2025-09-24 11:04:07.207] 512+0 records in [2025-09-24 11:04:07.207] 512+0 records out [2025-09-24 11:04:07.223] Waiting data available... [2025-09-24 11:04:07.255] Starting syslogd/klogd: done [2025-09-24 11:04:07.271] DML Start [2025-09-24 11:04:07.431] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:04:07.638] DML res1: 0 [2025-09-24 11:04:08.119] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:04:08.119] Read Success [2025-09-24 11:04:08.134] Verifying certificate... [2025-09-24 11:04:08.359] Verified OK [2025-09-24 11:04:08.390] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:04:09.956] Verified OK [2025-09-24 11:04:09.956] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:04:10.516] Verified OK [2025-09-24 11:04:10.532] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:04:13.314] fs.protected_hardlinks = 1 [2025-09-24 11:04:13.330] fs.protected_symlinks = 1 [2025-09-24 11:04:13.330] kernel.modules_disabled = 1 [2025-09-24 11:04:13.537] [2025-09-24 11:04:13.537] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:04:14.737] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:04:22.418] SBL1:1210.0.1.0 [2025-09-24 11:04:22.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:04:24.032] SBL2:1210.0.1.0 [2025-09-24 11:04:24.080] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:04:24.192] j-A [2025-09-24 11:04:31.533] The R5 Autosar Classic is running [2025-09-24 11:04:31.556] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:04:31.556] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:04:32.164] INIT: version 2.96 booting [2025-09-24 11:04:32.276] INIT: Entering runlevel: 5 [2025-09-24 11:04:32.420] mtd28 attached [2025-09-24 11:04:32.436] mtd24 attached [2025-09-24 11:04:32.452] mtd32 attached [2025-09-24 11:04:32.468] ubi0:animations is mounted. [2025-09-24 11:04:32.500] ubi1:textures is mounted. [2025-09-24 11:04:32.500] RTNETLINK answers: File exists [2025-09-24 11:04:32.527] ubi2:dml_code is mounted. [2025-09-24 11:04:32.527] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:04:32.527] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:04:32.527] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:04:32.563] data.LB_FadeInType0=100 [2025-09-24 11:04:32.563] data.CHLH_FadeInType0=0 [2025-09-24 11:04:32.563] data.WU_FadeInDelay=0 [2025-09-24 11:04:32.563] max_time_out=0 [2025-09-24 11:04:32.563] No splash screen [2025-09-24 11:04:32.563] stop dss Done [2025-09-24 11:04:32.563] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:04:32.563] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:04:32.632] /dev/mem opened. [2025-09-24 11:04:32.632] Memory mapped at address 0xffffb06f0000. [2025-09-24 11:04:32.632] Read at address 0x00600018 (0xffffb06f0018): 0x00000000 [2025-09-24 11:04:32.632] Write at address 0x00600018 (0xffffb06f0018): 0x00400040, readback 0x00400040 [2025-09-24 11:04:32.660] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:04:32.660] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:04:32.756] Loaded PowerVR consumer services. [2025-09-24 11:04:32.884] Waiting data available... [2025-09-24 11:04:32.884] 512+0 records in [2025-09-24 11:04:32.884] 512+0 records out [2025-09-24 11:04:32.932] Starting syslogd/klogd: done [2025-09-24 11:04:32.964] DML Start [2025-09-24 11:04:33.156] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:04:33.365] DML res1: 0 [2025-09-24 11:04:33.841] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:04:33.841] Read Success [2025-09-24 11:04:33.841] Verifying certificate... [2025-09-24 11:04:34.080] Verified OK [2025-09-24 11:04:34.096] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:04:35.822] Verified OK [2025-09-24 11:04:35.822] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:04:36.380] Verified OK [2025-09-24 11:04:36.402] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:04:38.912] fs.protected_hardlinks = 1 [2025-09-24 11:04:38.941] fs.protected_symlinks = 1 [2025-09-24 11:04:38.941] kernel.modules_disabled = 1 [2025-09-24 11:04:39.117] [2025-09-24 11:04:39.117] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:04:40.443] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:04:48.170] SBL1:1210.0.1.0 [2025-09-24 11:04:48.218] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:04:49.786] SBL2:1210.0.1.0 [2025-09-24 11:04:49.834] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:04:49.929] j-A [2025-09-24 11:04:57.285] The R5 Autosar Classic is running [2025-09-24 11:04:57.308] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:04:57.308] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:04:57.916] INIT: version 2.96 booting [2025-09-24 11:04:58.027] INIT: Entering runlevel: 5 [2025-09-24 11:04:58.187] mtd24 attached [2025-09-24 11:04:58.203] mtd28 attached [2025-09-24 11:04:58.235] ubi0:textures is mounted. [2025-09-24 11:04:58.235] mtd32 attached [2025-09-24 11:04:58.251] ubi1:animations is mounted. [2025-09-24 11:04:58.267] RTNETLINK answers: File exists [2025-09-24 11:04:58.306] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:04:58.306] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:04:58.306] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:04:58.306] ubi2:dml_code is mounted. [2025-09-24 11:04:58.306] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:04:58.306] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:04:58.331] data.LB_FadeInType0=100 [2025-09-24 11:04:58.331] data.CHLH_FadeInType0=0 [2025-09-24 11:04:58.331] data.WU_FadeInDelay=0 [2025-09-24 11:04:58.331] max_time_out=0 [2025-09-24 11:04:58.331] No splash screen [2025-09-24 11:04:58.331] stop dss Done [2025-09-24 11:04:58.363] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:04:58.397] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:04:58.397] /dev/mem opened. [2025-09-24 11:04:58.397] Memory mapped at address 0xffffa875d000. [2025-09-24 11:04:58.397] Read at address 0x00600018 (0xffffa875d018): 0x00000000 [2025-09-24 11:04:58.397] Write at address 0x00600018 (0xffffa875d018): 0x00400040, readback 0x00400040 [2025-09-24 11:04:58.492] Loaded PowerVR consumer services. [2025-09-24 11:04:58.637] Waiting data available... [2025-09-24 11:04:58.653] 512+0 records in [2025-09-24 11:04:58.653] 512+0 records out [2025-09-24 11:04:58.685] Starting syslogd/klogd: done [2025-09-24 11:04:58.701] DML Start [2025-09-24 11:04:58.893] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:04:59.117] DML res1: 0 [2025-09-24 11:04:59.612] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:04:59.612] Read Success [2025-09-24 11:04:59.628] Verifying certificate... [2025-09-24 11:04:59.852] Verified OK [2025-09-24 11:04:59.868] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:05:01.392] Verified OK [2025-09-24 11:05:01.392] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:05:02.016] Verified OK [2025-09-24 11:05:02.016] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:05:04.750] fs.protected_hardlinks = 1 [2025-09-24 11:05:04.750] fs.protected_symlinks = 1 [2025-09-24 11:05:04.766] kernel.modules_disabled = 1 [2025-09-24 11:05:04.958] [2025-09-24 11:05:04.958] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:05:06.181] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:05:13.919] SBL1:1210.0.1.0 [2025-09-24 11:05:13.951] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:05:15.534] SBL2:1210.0.1.0 [2025-09-24 11:05:15.566] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:05:15.678] j-A [2025-09-24 11:05:23.051] The R5 Autosar Classic is running [2025-09-24 11:05:23.051] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:05:23.051] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:05:23.658] INIT: version 2.96 booting [2025-09-24 11:05:23.771] INIT: Entering runlevel: 5 [2025-09-24 11:05:23.914] mtd24 attached [2025-09-24 11:05:23.930] mtd28 attached [2025-09-24 11:05:23.946] mtd32 attached [2025-09-24 11:05:23.995] ubi0:textures is mounted. [2025-09-24 11:05:23.995] RTNETLINK answers: File exists [2025-09-24 11:05:24.049] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:05:24.049] ubi1:animations is mounted. [2025-09-24 11:05:24.049] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:05:24.049] ubi2:dml_code is mounted. [2025-09-24 11:05:24.049] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:05:24.049] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:05:24.049] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:05:24.049] data.LB_FadeInType0=100 [2025-09-24 11:05:24.049] data.CHLH_FadeInType0=0 [2025-09-24 11:05:24.049] data.WU_FadeInDelay=0 [2025-09-24 11:05:24.049] max_time_out=0 [2025-09-24 11:05:24.049] No splash screen [2025-09-24 11:05:24.049] stop dss Done [2025-09-24 11:05:24.117] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:05:24.117] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:05:24.117] /dev/mem opened. [2025-09-24 11:05:24.117] Memory mapped at address 0xffff9e1cf000. [2025-09-24 11:05:24.117] Read at address 0x00600018 (0xffff9e1cf018): 0x00000000 [2025-09-24 11:05:24.117] Write at address 0x00600018 (0xffff9e1cf018): 0x00400040, readback 0x00400040 [2025-09-24 11:05:24.229] Loaded PowerVR consumer services. [2025-09-24 11:05:24.373] Waiting data available... [2025-09-24 11:05:24.373] 512+0 records in [2025-09-24 11:05:24.389] 512+0 records out [2025-09-24 11:05:24.421] Starting syslogd/klogd: done [2025-09-24 11:05:24.437] DML Start [2025-09-24 11:05:24.629] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:05:24.853] DML res1: 0 [2025-09-24 11:05:25.332] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:05:25.349] Read Success [2025-09-24 11:05:25.349] Verifying certificate... [2025-09-24 11:05:25.604] Verified OK [2025-09-24 11:05:25.620] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:05:27.331] Verified OK [2025-09-24 11:05:27.331] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:05:27.918] Verified OK [2025-09-24 11:05:27.918] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:05:30.361] fs.protected_hardlinks = 1 [2025-09-24 11:05:30.361] fs.protected_symlinks = 1 [2025-09-24 11:05:30.361] kernel.modules_disabled = 1 [2025-09-24 11:05:30.552] [2025-09-24 11:05:30.552] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:05:31.896] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:05:39.650] SBL1:1210.0.1.0 [2025-09-24 11:05:39.681] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:05:41.264] SBL2:1210.0.1.0 [2025-09-24 11:05:41.296] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:05:41.408] j-A [2025-09-24 11:05:48.782] The R5 Autosar Classic is running [2025-09-24 11:05:48.782] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:05:48.782] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:05:49.390] INIT: version 2.96 booting [2025-09-24 11:05:49.502] INIT: Entering runlevel: 5 [2025-09-24 11:05:49.645] mtd24 attached [2025-09-24 11:05:49.661] mtd32 attached [2025-09-24 11:05:49.678] mtd28 attached [2025-09-24 11:05:49.710] ubi0:textures is mounted. [2025-09-24 11:05:49.726] RTNETLINK answers: File exists [2025-09-24 11:05:49.726] ubi1:dml_code is mounted. [2025-09-24 11:05:49.781] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:05:49.781] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:05:49.781] ubi2:animations is mounted. [2025-09-24 11:05:49.781] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:05:49.781] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:05:49.781] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:05:49.781] data.LB_FadeInType0=100 [2025-09-24 11:05:49.781] data.CHLH_FadeInType0=0 [2025-09-24 11:05:49.781] data.WU_FadeInDelay=0 [2025-09-24 11:05:49.781] max_time_out=0 [2025-09-24 11:05:49.781] No splash screen [2025-09-24 11:05:49.781] stop dss Done [2025-09-24 11:05:49.814] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:05:49.852] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:05:49.852] /dev/mem opened. [2025-09-24 11:05:49.852] Memory mapped at address 0xffff95fc8000. [2025-09-24 11:05:49.852] Read at address 0x00600018 (0xffff95fc8018): 0x00000000 [2025-09-24 11:05:49.852] Write at address 0x00600018 (0xffff95fc8018): 0x00400040, readback 0x00400040 [2025-09-24 11:05:49.964] Loaded PowerVR consumer services. [2025-09-24 11:05:50.121] Waiting data available... [2025-09-24 11:05:50.121] 512+0 records in [2025-09-24 11:05:50.121] 512+0 records out [2025-09-24 11:05:50.138] Starting syslogd/klogd: done [2025-09-24 11:05:50.154] DML Start [2025-09-24 11:05:50.346] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:05:50.602] DML res1: 0 [2025-09-24 11:05:50.953] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:05:50.974] Read Success [2025-09-24 11:05:50.974] Verifying certificate... [2025-09-24 11:05:51.215] Verified OK [2025-09-24 11:05:51.230] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:05:53.026] Verified OK [2025-09-24 11:05:53.026] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:05:53.649] Verified OK [2025-09-24 11:05:53.649] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:05:56.240] fs.protected_hardlinks = 1 [2025-09-24 11:05:56.256] fs.protected_symlinks = 1 [2025-09-24 11:05:56.256] kernel.modules_disabled = 1 [2025-09-24 11:05:56.447] [2025-09-24 11:05:56.447] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:05:57.674] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:05:59.968] SBL1:1210.0.1.0 [2025-09-24 11:06:05.437] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:06:07.003] SBL2:1210.0.1.0 [2025-09-24 11:06:07.051] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:06:07.163] j-A [2025-09-24 11:06:14.502] The R5 Autosar Classic is running [2025-09-24 11:06:14.527] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:06:14.527] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:06:15.135] INIT: version 2.96 booting [2025-09-24 11:06:15.247] INIT: Entering runlevel: 5 [2025-09-24 11:06:15.406] mtd24 attached [2025-09-24 11:06:15.406] mtd28 attached [2025-09-24 11:06:15.422] mtd32 attached [2025-09-24 11:06:15.471] RTNETLINK answers: File exists [2025-09-24 11:06:15.487] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:06:15.487] ubi0:textures is mounted. [2025-09-24 11:06:15.520] ubi2:dml_code is mounted. [2025-09-24 11:06:15.520] ubi1:animations is mounted. [2025-09-24 11:06:15.520] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:06:15.520] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:06:15.520] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:06:15.520] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:06:15.543] data.LB_FadeInType0=100 [2025-09-24 11:06:15.543] data.CHLH_FadeInType0=0 [2025-09-24 11:06:15.543] data.WU_FadeInDelay=0 [2025-09-24 11:06:15.543] max_time_out=0 [2025-09-24 11:06:15.543] No splash screen [2025-09-24 11:06:15.543] stop dss Done [2025-09-24 11:06:15.575] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:06:15.591] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:06:15.591] /dev/mem opened. [2025-09-24 11:06:15.623] Memory mapped at address 0xffff883cc000. [2025-09-24 11:06:15.623] Read at address 0x00600018 (0xffff883cc018): 0x00000000 [2025-09-24 11:06:15.623] Write at address 0x00600018 (0xffff883cc018): 0x00400040, readback 0x00400040 [2025-09-24 11:06:15.703] Loaded PowerVR consumer services. [2025-09-24 11:06:15.862] 512+0 records in [2025-09-24 11:06:15.862] 512+0 records out [2025-09-24 11:06:15.878] Waiting data available... [2025-09-24 11:06:15.910] Starting syslogd/klogd: done [2025-09-24 11:06:15.926] DML Start [2025-09-24 11:06:16.071] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:06:16.246] DML res1: 0 [2025-09-24 11:06:16.798] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:06:16.798] Read Success [2025-09-24 11:06:16.798] Verifying certificate... [2025-09-24 11:06:17.086] Verified OK [2025-09-24 11:06:17.086] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:06:18.770] Verified OK [2025-09-24 11:06:18.770] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:06:19.409] Verified OK [2025-09-24 11:06:19.430] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:06:22.038] fs.protected_hardlinks = 1 [2025-09-24 11:06:22.038] fs.protected_symlinks = 1 [2025-09-24 11:06:22.054] kernel.modules_disabled = 1 [2025-09-24 11:06:22.245] [2025-09-24 11:06:22.245] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:06:23.394] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:06:31.106] SBL1:1210.0.1.0 [2025-09-24 11:06:31.138] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:06:32.721] SBL2:1210.0.1.0 [2025-09-24 11:06:32.753] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:06:32.865] j-A [2025-09-24 11:06:40.204] The R5 Autosar Classic is running [2025-09-24 11:06:40.235] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:06:40.235] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:06:40.843] INIT: version 2.96 booting [2025-09-24 11:06:40.955] INIT: Entering runlevel: 5 [2025-09-24 11:06:41.098] mtd24 attached [2025-09-24 11:06:41.114] mtd32 attached [2025-09-24 11:06:41.130] mtd28 attached [2025-09-24 11:06:41.239] ubi0:textures is mounted. [2025-09-24 11:06:41.239] RTNETLINK answers: File exists [2025-09-24 11:06:41.239] ubi2:animations is mounted. [2025-09-24 11:06:41.239] ubi1:dml_code is mounted. [2025-09-24 11:06:41.239] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:06:41.239] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:06:41.239] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:06:41.239] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:06:41.239] data.LB_FadeInType0=100 [2025-09-24 11:06:41.239] data.CHLH_FadeInType0=0 [2025-09-24 11:06:41.239] data.WU_FadeInDelay=0 [2025-09-24 11:06:41.239] max_time_out=0 [2025-09-24 11:06:41.239] No splash screen [2025-09-24 11:06:41.239] stop dss Done [2025-09-24 11:06:41.239] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:06:41.287] /dev/mem opened. [2025-09-24 11:06:41.287] Memory mapped at address 0xffff8e669000. [2025-09-24 11:06:41.318] Read at address 0x00600018 (0xffff8e669018): 0x00000000 [2025-09-24 11:06:41.318] Write at address 0x00600018 (0xffff8e669018): 0x00400040, readback 0x00400040 [2025-09-24 11:06:41.318] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:06:41.334] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:06:41.414] Loaded PowerVR consumer services. [2025-09-24 11:06:41.568] Waiting data available... [2025-09-24 11:06:41.568] 512+0 records in [2025-09-24 11:06:41.568] 512+0 records out [2025-09-24 11:06:41.616] Starting syslogd/klogd: done [2025-09-24 11:06:41.632] DML Start [2025-09-24 11:06:41.840] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:06:42.080] DML res1: 0 [2025-09-24 11:06:42.463] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:06:42.480] Read Success [2025-09-24 11:06:42.480] Verifying certificate... [2025-09-24 11:06:42.735] Verified OK [2025-09-24 11:06:42.751] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:06:44.455] Verified OK [2025-09-24 11:06:44.455] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:06:45.046] Verified OK [2025-09-24 11:06:45.062] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:06:47.589] fs.protected_hardlinks = 1 [2025-09-24 11:06:47.605] fs.protected_symlinks = 1 [2025-09-24 11:06:47.605] kernel.modules_disabled = 1 [2025-09-24 11:06:47.813] [2025-09-24 11:06:47.813] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:06:49.118] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:06:56.802] SBL1:1210.0.1.0 [2025-09-24 11:06:56.851] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:06:58.417] SBL2:1210.0.1.0 [2025-09-24 11:06:58.464] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:06:58.561] j-A [2025-09-24 11:07:05.915] The R5 Autosar Classic is running [2025-09-24 11:07:05.939] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:07:05.939] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:07:06.547] INIT: version 2.96 booting [2025-09-24 11:07:06.659] INIT: Entering runlevel: 5 [2025-09-24 11:07:06.819] mtd24 attached [2025-09-24 11:07:06.819] mtd28 attached [2025-09-24 11:07:06.835] mtd32 attached [2025-09-24 11:07:06.883] ubi1:animations is mounted. [2025-09-24 11:07:06.883] RTNETLINK answers: File exists [2025-09-24 11:07:06.923] ubi0:textures is mounted. [2025-09-24 11:07:06.923] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:07:06.923] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:07:06.923] ubi2:dml_code is mounted. [2025-09-24 11:07:06.923] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:07:06.923] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:07:06.923] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:07:06.944] data.LB_FadeInType0=100 [2025-09-24 11:07:06.944] data.CHLH_FadeInType0=0 [2025-09-24 11:07:06.944] data.WU_FadeInDelay=0 [2025-09-24 11:07:06.944] max_time_out=0 [2025-09-24 11:07:06.944] No splash screen [2025-09-24 11:07:06.944] stop dss Done [2025-09-24 11:07:06.960] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:07:06.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:07:07.025] /dev/mem opened. [2025-09-24 11:07:07.025] Memory mapped at address 0xffffba9f4000. [2025-09-24 11:07:07.025] Read at address 0x00600018 (0xffffba9f4018): 0x00000000 [2025-09-24 11:07:07.025] Write at address 0x00600018 (0xffffba9f4018): 0x00400040, readback 0x00400040 [2025-09-24 11:07:07.137] Loaded PowerVR consumer services. [2025-09-24 11:07:07.288] 512+0 records in [2025-09-24 11:07:07.288] 512+0 records out [2025-09-24 11:07:07.288] Waiting data available... [2025-09-24 11:07:07.320] Starting syslogd/klogd: done [2025-09-24 11:07:07.336] DML Start [2025-09-24 11:07:07.513] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:07:07.736] DML res1: 0 [2025-09-24 11:07:08.184] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:07:08.200] Read Success [2025-09-24 11:07:08.200] Verifying certificate... [2025-09-24 11:07:08.424] Verified OK [2025-09-24 11:07:08.439] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:07:10.065] Verified OK [2025-09-24 11:07:10.065] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:07:10.652] Verified OK [2025-09-24 11:07:10.652] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:07:13.227] fs.protected_hardlinks = 1 [2025-09-24 11:07:13.243] fs.protected_symlinks = 1 [2025-09-24 11:07:13.259] kernel.modules_disabled = 1 [2025-09-24 11:07:13.435] [2025-09-24 11:07:13.435] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:07:14.775] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:07:22.542] SBL1:1210.0.1.0 [2025-09-24 11:07:22.574] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:07:24.157] SBL2:1210.0.1.0 [2025-09-24 11:07:24.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:07:24.300] j-A [2025-09-24 11:07:31.638] The R5 Autosar Classic is running [2025-09-24 11:07:31.670] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:07:31.670] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:07:32.277] INIT: version 2.96 booting [2025-09-24 11:07:32.390] INIT: Entering runlevel: 5 [2025-09-24 11:07:32.549] mtd24 attached [2025-09-24 11:07:32.549] mtd28 attached [2025-09-24 11:07:32.565] mtd32 attached [2025-09-24 11:07:32.613] ubi0:textures is mounted. [2025-09-24 11:07:32.685] ubi1:animations is mounted. [2025-09-24 11:07:32.685] RTNETLINK answers: File exists [2025-09-24 11:07:32.685] ubi2:dml_code is mounted. [2025-09-24 11:07:32.685] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:07:32.685] data.LB_FadeInType0=100 [2025-09-24 11:07:32.685] data.CHLH_FadeInType0=0 [2025-09-24 11:07:32.685] data.WU_FadeInDelay=0 [2025-09-24 11:07:32.685] max_time_out=0 [2025-09-24 11:07:32.685] No splash screen [2025-09-24 11:07:32.685] stop dss Done [2025-09-24 11:07:32.685] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:07:32.685] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:07:32.685] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:07:32.685] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:07:32.716] /dev/mem opened. [2025-09-24 11:07:32.748] Memory mapped at address 0xffffa8758000. [2025-09-24 11:07:32.748] Read at address 0x00600018 (0xffffa8758018): 0x00000000 [2025-09-24 11:07:32.748] Write at address 0x00600018 (0xffffa8758018): 0x00400040, readback 0x00400040 [2025-09-24 11:07:32.748] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:07:32.764] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:07:32.972] Loaded PowerVR consumer services. [2025-09-24 11:07:33.020] 512+0 records in [2025-09-24 11:07:33.020] 512+0 records out [2025-09-24 11:07:33.020] Waiting data available... [2025-09-24 11:07:33.068] Starting syslogd/klogd: done [2025-09-24 11:07:33.084] DML Start [2025-09-24 11:07:33.260] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:07:33.484] DML res1: 0 [2025-09-24 11:07:33.961] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:07:33.961] Read Success [2025-09-24 11:07:33.961] Verifying certificate... [2025-09-24 11:07:34.184] Verified OK [2025-09-24 11:07:34.200] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:07:35.791] Verified OK [2025-09-24 11:07:35.791] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:07:36.405] Verified OK [2025-09-24 11:07:36.405] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:07:39.075] fs.protected_hardlinks = 1 [2025-09-24 11:07:39.075] fs.protected_symlinks = 1 [2025-09-24 11:07:39.091] kernel.modules_disabled = 1 [2025-09-24 11:07:39.283] [2025-09-24 11:07:39.283] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:07:40.624] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:07:48.277] SBL1:1210.0.1.0 [2025-09-24 11:07:48.325] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:07:49.892] SBL2:1210.0.1.0 [2025-09-24 11:07:49.940] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:07:50.052] j-A [2025-09-24 11:07:57.390] The R5 Autosar Classic is running [2025-09-24 11:07:57.416] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:07:57.416] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:07:58.024] INIT: version 2.96 booting [2025-09-24 11:07:58.135] INIT: Entering runlevel: 5 [2025-09-24 11:07:58.295] mtd24 attached [2025-09-24 11:07:58.311] mtd32 attached [2025-09-24 11:07:58.311] mtd28 attached [2025-09-24 11:07:58.343] ubi0:textures is mounted. [2025-09-24 11:07:58.359] RTNETLINK answers: File exists [2025-09-24 11:07:58.397] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:07:58.397] ubi1:dml_code is mounted. [2025-09-24 11:07:58.397] ubi2:animations is mounted. [2025-09-24 11:07:58.397] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:07:58.397] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:07:58.397] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:07:58.397] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:07:58.419] data.LB_FadeInType0=100 [2025-09-24 11:07:58.419] data.CHLH_FadeInType0=0 [2025-09-24 11:07:58.419] data.WU_FadeInDelay=0 [2025-09-24 11:07:58.419] max_time_out=0 [2025-09-24 11:07:58.419] No splash screen [2025-09-24 11:07:58.419] stop dss Done [2025-09-24 11:07:58.464] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:07:58.464] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:07:58.497] /dev/mem opened. [2025-09-24 11:07:58.497] Memory mapped at address 0xffff9176d000. [2025-09-24 11:07:58.497] Read at address 0x00600018 (0xffff9176d018): 0x00000000 [2025-09-24 11:07:58.497] Write at address 0x00600018 (0xffff9176d018): 0x00400040, readback 0x00400040 [2025-09-24 11:07:58.625] Loaded PowerVR consumer services. [2025-09-24 11:07:58.767] Waiting data available... [2025-09-24 11:07:58.767] 512+0 records in [2025-09-24 11:07:58.767] 512+0 records out [2025-09-24 11:07:58.799] Starting syslogd/klogd: done [2025-09-24 11:07:58.815] DML Start [2025-09-24 11:07:59.022] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:07:59.230] DML res1: 0 [2025-09-24 11:07:59.662] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:07:59.662] Read Success [2025-09-24 11:07:59.678] Verifying certificate... [2025-09-24 11:07:59.902] Verified OK [2025-09-24 11:07:59.918] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:08:01.581] Verified OK [2025-09-24 11:08:01.597] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:08:02.221] Verified OK [2025-09-24 11:08:02.221] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:08:04.765] fs.protected_hardlinks = 1 [2025-09-24 11:08:04.780] fs.protected_symlinks = 1 [2025-09-24 11:08:04.780] kernel.modules_disabled = 1 [2025-09-24 11:08:04.971] [2025-09-24 11:08:04.971] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:08:06.306] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:08:14.060] SBL1:1210.0.1.0 [2025-09-24 11:08:14.092] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:08:15.675] SBL2:1210.0.1.0 [2025-09-24 11:08:15.707] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:08:15.819] j-A [2025-09-24 11:08:23.376] The R5 Autosar Classic is running [2025-09-24 11:08:23.376] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:08:23.376] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:08:23.799] INIT: version 2.96 booting [2025-09-24 11:08:23.911] INIT: Entering runlevel: 5 [2025-09-24 11:08:24.071] mtd24 attached [2025-09-24 11:08:24.071] mtd28 attached [2025-09-24 11:08:24.087] mtd32 attached [2025-09-24 11:08:24.193] ubi0:textures is mounted. [2025-09-24 11:08:24.193] ubi1:animations is mounted. [2025-09-24 11:08:24.193] RTNETLINK answers: File exists [2025-09-24 11:08:24.193] ubi2:dml_code is mounted. [2025-09-24 11:08:24.193] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:08:24.193] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:08:24.193] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:08:24.193] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:08:24.193] data.LB_FadeInType0=100 [2025-09-24 11:08:24.193] data.CHLH_FadeInType0=0 [2025-09-24 11:08:24.193] data.WU_FadeInDelay=0 [2025-09-24 11:08:24.193] max_time_out=0 [2025-09-24 11:08:24.193] No splash screen [2025-09-24 11:08:24.193] stop dss Done [2025-09-24 11:08:24.193] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:08:24.225] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:08:24.260] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:08:24.260] /dev/mem opened. [2025-09-24 11:08:24.260] Memory mapped at address 0xffffbeed4000. [2025-09-24 11:08:24.260] Read at address 0x00600018 (0xffffbeed4018): 0x00000000 [2025-09-24 11:08:24.260] Write at address 0x00600018 (0xffffbeed4018): 0x00400040, readback 0x00400040 [2025-09-24 11:08:24.356] Loaded PowerVR consumer services. [2025-09-24 11:08:24.524] Waiting data available... [2025-09-24 11:08:24.524] 512+0 records in [2025-09-24 11:08:24.524] 512+0 records out [2025-09-24 11:08:24.557] Starting syslogd/klogd: done [2025-09-24 11:08:24.573] DML Start [2025-09-24 11:08:24.781] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:08:25.004] DML res1: 0 [2025-09-24 11:08:25.420] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:08:25.436] Read Success [2025-09-24 11:08:25.436] Verifying certificate... [2025-09-24 11:08:25.660] Verified OK [2025-09-24 11:08:25.676] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:08:27.387] Verified OK [2025-09-24 11:08:27.387] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:08:28.000] Verified OK [2025-09-24 11:08:28.000] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:08:30.703] fs.protected_hardlinks = 1 [2025-09-24 11:08:30.719] fs.protected_symlinks = 1 [2025-09-24 11:08:30.719] kernel.modules_disabled = 1 [2025-09-24 11:08:30.926] [2025-09-24 11:08:30.926] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:08:32.061] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:08:39.832] SBL1:1210.0.1.0 [2025-09-24 11:08:39.880] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:08:41.446] SBL2:1210.0.1.0 [2025-09-24 11:08:41.478] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:08:41.590] j-A [2025-09-24 11:08:48.946] The R5 Autosar Classic is running [2025-09-24 11:08:48.946] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:08:48.966] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:08:49.574] INIT: version 2.96 booting [2025-09-24 11:08:49.686] INIT: Entering runlevel: 5 [2025-09-24 11:08:49.846] mtd28 attached [2025-09-24 11:08:49.846] mtd24 attached [2025-09-24 11:08:49.862] mtd32 attached [2025-09-24 11:08:49.910] ubi0:animations is mounted. [2025-09-24 11:08:49.910] RTNETLINK answers: File exists [2025-09-24 11:08:49.969] ubi1:textures is mounted. [2025-09-24 11:08:49.969] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:08:49.969] ubi2:dml_code is mounted. [2025-09-24 11:08:49.969] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:08:49.969] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:08:49.969] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:08:49.969] data.LB_FadeInType0=100 [2025-09-24 11:08:49.969] data.CHLH_FadeInType0=0 [2025-09-24 11:08:49.969] data.WU_FadeInDelay=0 [2025-09-24 11:08:49.969] max_time_out=0 [2025-09-24 11:08:49.969] No splash screen [2025-09-24 11:08:49.969] stop dss Done [2025-09-24 11:08:49.969] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:08:50.001] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:08:50.053] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:08:50.053] /dev/mem opened. [2025-09-24 11:08:50.053] Memory mapped at address 0xffff88923000. [2025-09-24 11:08:50.053] Read at address 0x00600018 (0xffff88923018): 0x00000000 [2025-09-24 11:08:50.053] Write at address 0x00600018 (0xffff88923018): 0x00400040, readback 0x00400040 [2025-09-24 11:08:50.181] Loaded PowerVR consumer services. [2025-09-24 11:08:50.293] Waiting data available... [2025-09-24 11:08:50.293] 512+0 records in [2025-09-24 11:08:50.293] 512+0 records out [2025-09-24 11:08:50.325] Starting syslogd/klogd: done [2025-09-24 11:08:50.341] DML Start [2025-09-24 11:08:50.532] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:08:50.772] DML res1: 0 [2025-09-24 11:08:51.179] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:08:51.179] Read Success [2025-09-24 11:08:51.179] Verifying certificate... [2025-09-24 11:08:51.434] Verified OK [2025-09-24 11:08:51.450] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:08:52.964] Verified OK [2025-09-24 11:08:52.964] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:08:53.492] Verified OK [2025-09-24 11:08:53.492] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:08:56.386] fs.protected_hardlinks = 1 [2025-09-24 11:08:56.386] fs.protected_symlinks = 1 [2025-09-24 11:08:56.402] kernel.modules_disabled = 1 [2025-09-24 11:08:56.594] [2025-09-24 11:08:56.594] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:08:57.775] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:09:05.575] SBL1:1210.0.1.0 [2025-09-24 11:09:05.607] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:09:07.190] SBL2:1210.0.1.0 [2025-09-24 11:09:07.221] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:09:07.333] j-A [2025-09-24 11:09:14.707] The R5 Autosar Classic is running [2025-09-24 11:09:14.707] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:09:14.707] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:09:15.314] INIT: version 2.96 booting [2025-09-24 11:09:15.426] INIT: Entering runlevel: 5 [2025-09-24 11:09:15.587] mtd32 attached [2025-09-24 11:09:15.587] mtd28 attached [2025-09-24 11:09:15.603] mtd24 attached [2025-09-24 11:09:15.651] ubi0:dml_code is mounted. [2025-09-24 11:09:15.651] RTNETLINK answers: File exists [2025-09-24 11:09:15.715] ubi1:animations is mounted. [2025-09-24 11:09:15.715] ubi2:textures is mounted. [2025-09-24 11:09:15.715] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:09:15.715] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:09:15.715] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:09:15.715] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:09:15.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:09:15.715] data.LB_FadeInType0=100 [2025-09-24 11:09:15.715] data.CHLH_FadeInType0=0 [2025-09-24 11:09:15.715] data.WU_FadeInDelay=0 [2025-09-24 11:09:15.715] max_time_out=0 [2025-09-24 11:09:15.715] No splash screen [2025-09-24 11:09:15.715] stop dss Done [2025-09-24 11:09:15.785] /dev/mem opened. [2025-09-24 11:09:15.785] Memory mapped at address 0xffffba65b000. [2025-09-24 11:09:15.785] Read at address 0x00600018 (0xffffba65b018): 0x00000000 [2025-09-24 11:09:15.785] Write at address 0x00600018 (0xffffba65b018): 0x00400040, readback 0x00400040 [2025-09-24 11:09:15.785] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:09:15.801] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:09:15.881] Loaded PowerVR consumer services. [2025-09-24 11:09:16.055] Waiting data available... [2025-09-24 11:09:16.055] 512+0 records in [2025-09-24 11:09:16.055] 512+0 records out [2025-09-24 11:09:16.071] Starting syslogd/klogd: done [2025-09-24 11:09:16.087] DML Start [2025-09-24 11:09:16.247] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:09:16.487] DML res1: 0 [2025-09-24 11:09:16.914] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:09:16.914] Read Success [2025-09-24 11:09:16.914] Verifying certificate... [2025-09-24 11:09:17.170] Verified OK [2025-09-24 11:09:17.186] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:09:18.833] Verified OK [2025-09-24 11:09:18.833] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:09:19.424] Verified OK [2025-09-24 11:09:19.440] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:09:21.998] fs.protected_hardlinks = 1 [2025-09-24 11:09:22.014] fs.protected_symlinks = 1 [2025-09-24 11:09:22.014] kernel.modules_disabled = 1 [2025-09-24 11:09:22.191] [2025-09-24 11:09:22.191] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:09:23.511] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:09:31.366] SBL1:1210.0.1.0 [2025-09-24 11:09:31.414] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:09:32.981] SBL2:1210.0.1.0 [2025-09-24 11:09:33.012] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:09:33.124] j-A [2025-09-24 11:09:40.502] The R5 Autosar Classic is running [2025-09-24 11:09:40.502] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:09:40.502] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:09:41.109] INIT: version 2.96 booting [2025-09-24 11:09:41.204] INIT: Entering runlevel: 5 [2025-09-24 11:09:41.364] mtd24 attached [2025-09-24 11:09:41.380] mtd32 attached [2025-09-24 11:09:41.396] mtd28 attached [2025-09-24 11:09:41.412] ubi0:textures is mounted. [2025-09-24 11:09:41.428] ubi1:dml_code is mounted. [2025-09-24 11:09:41.445] RTNETLINK answers: File exists [2025-09-24 11:09:41.445] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:09:41.496] ubi2:animations is mounted. [2025-09-24 11:09:41.496] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:09:41.496] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:09:41.496] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:09:41.496] data.LB_FadeInType0=100 [2025-09-24 11:09:41.496] data.CHLH_FadeInType0=0 [2025-09-24 11:09:41.496] data.WU_FadeInDelay=0 [2025-09-24 11:09:41.496] max_time_out=0 [2025-09-24 11:09:41.496] No splash screen [2025-09-24 11:09:41.496] stop dss Done [2025-09-24 11:09:41.496] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:09:41.560] /dev/mem opened. [2025-09-24 11:09:41.560] Memory mapped at address 0xffffb0a55000. [2025-09-24 11:09:41.560] Read at address 0x00600018 (0xffffb0a55018): 0x00000000 [2025-09-24 11:09:41.560] Write at address 0x00600018 (0xffffb0a55018): 0x00400040, readback 0x00400040 [2025-09-24 11:09:41.560] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:09:41.560] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:09:41.768] Loaded PowerVR consumer services. [2025-09-24 11:09:41.816] Waiting data available... [2025-09-24 11:09:41.848] 512+0 records in [2025-09-24 11:09:41.848] 512+0 records out [2025-09-24 11:09:41.864] Starting syslogd/klogd: done [2025-09-24 11:09:41.896] DML Start [2025-09-24 11:09:42.072] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:09:42.279] DML res1: 0 [2025-09-24 11:09:42.728] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:09:42.744] Read Success [2025-09-24 11:09:42.744] Verifying certificate... [2025-09-24 11:09:43.047] Verified OK [2025-09-24 11:09:43.063] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:09:44.622] Verified OK [2025-09-24 11:09:44.622] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:09:45.285] Verified OK [2025-09-24 11:09:45.285] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:09:47.796] fs.protected_hardlinks = 1 [2025-09-24 11:09:47.811] fs.protected_symlinks = 1 [2025-09-24 11:09:47.827] kernel.modules_disabled = 1 [2025-09-24 11:09:48.019] [2025-09-24 11:09:48.019] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:09:49.378] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:09:57.132] SBL1:1210.0.1.0 [2025-09-24 11:09:57.163] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:09:58.746] SBL2:1210.0.1.0 [2025-09-24 11:09:58.778] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:09:58.890] j-A [2025-09-24 11:10:06.265] The R5 Autosar Classic is running [2025-09-24 11:10:06.265] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:10:06.265] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:10:06.873] INIT: version 2.96 booting [2025-09-24 11:10:06.985] INIT: Entering runlevel: 5 [2025-09-24 11:10:07.129] mtd32 attached [2025-09-24 11:10:07.144] mtd24 attached [2025-09-24 11:10:07.160] mtd28 attached [2025-09-24 11:10:07.260] RTNETLINK answers: File exists [2025-09-24 11:10:07.260] ubi0:dml_code is mounted. [2025-09-24 11:10:07.260] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:10:07.260] ubi1:textures is mounted. [2025-09-24 11:10:07.260] ubi2:animations is mounted. [2025-09-24 11:10:07.260] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:10:07.260] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:10:07.260] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:10:07.260] data.LB_FadeInType0=100 [2025-09-24 11:10:07.260] data.CHLH_FadeInType0=0 [2025-09-24 11:10:07.260] data.WU_FadeInDelay=0 [2025-09-24 11:10:07.260] max_time_out=0 [2025-09-24 11:10:07.260] No splash screen [2025-09-24 11:10:07.260] stop dss Done [2025-09-24 11:10:07.260] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:10:07.308] /dev/mem opened. [2025-09-24 11:10:07.308] Memory mapped at address 0xffffa0378000. [2025-09-24 11:10:07.335] Read at address 0x00600018 (0xffffa0378018): 0x00000000 [2025-09-24 11:10:07.335] Write at address 0x00600018 (0xffffa0378018): 0x00400040, readback 0x00400040 [2025-09-24 11:10:07.367] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:10:07.367] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:10:07.591] Loaded PowerVR consumer services. [2025-09-24 11:10:07.607] Waiting data available... [2025-09-24 11:10:07.638] 512+0 records in [2025-09-24 11:10:07.638] 512+0 records out [2025-09-24 11:10:07.654] Starting syslogd/klogd: done [2025-09-24 11:10:07.670] DML Start [2025-09-24 11:10:07.910] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:10:08.134] DML res1: 0 [2025-09-24 11:10:08.422] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:10:08.443] Read Success [2025-09-24 11:10:08.443] Verifying certificate... [2025-09-24 11:10:08.683] Verified OK [2025-09-24 11:10:08.683] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:10:10.312] Verified OK [2025-09-24 11:10:10.312] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:10:10.973] Verified OK [2025-09-24 11:10:10.973] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:10:13.691] fs.protected_hardlinks = 1 [2025-09-24 11:10:13.707] fs.protected_symlinks = 1 [2025-09-24 11:10:13.707] kernel.modules_disabled = 1 [2025-09-24 11:10:13.899] [2025-09-24 11:10:13.899] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:10:15.172] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:10:22.863] SBL1:1210.0.1.0 [2025-09-24 11:10:22.911] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:10:24.477] SBL2:1210.0.1.0 [2025-09-24 11:10:24.525] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:10:24.620] j-A [2025-09-24 11:10:31.977] The R5 Autosar Classic is running [2025-09-24 11:10:32.001] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:10:32.001] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:10:32.609] INIT: version 2.96 booting [2025-09-24 11:10:32.720] INIT: Entering runlevel: 5 [2025-09-24 11:10:32.881] mtd24 attached [2025-09-24 11:10:32.881] mtd28 attached [2025-09-24 11:10:32.897] mtd32 attached [2025-09-24 11:10:32.913] ubi0:textures is mounted. [2025-09-24 11:10:32.945] RTNETLINK answers: File exists [2025-09-24 11:10:33.004] ubi1:animations is mounted. [2025-09-24 11:10:33.004] ubi2:dml_code is mounted. [2025-09-24 11:10:33.004] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:10:33.004] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:10:33.004] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:10:33.004] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:10:33.004] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:10:33.004] data.LB_FadeInType0=100 [2025-09-24 11:10:33.004] data.CHLH_FadeInType0=0 [2025-09-24 11:10:33.004] data.WU_FadeInDelay=0 [2025-09-24 11:10:33.004] max_time_out=0 [2025-09-24 11:10:33.004] No splash screen [2025-09-24 11:10:33.004] stop dss Done [2025-09-24 11:10:33.052] /dev/mem opened. [2025-09-24 11:10:33.052] Memory mapped at address 0xffffb9c86000. [2025-09-24 11:10:33.083] Read at address 0x00600018 (0xffffb9c86018): 0x00000000 [2025-09-24 11:10:33.083] Write at address 0x00600018 (0xffffb9c86018): 0x00400040, readback 0x00400040 [2025-09-24 11:10:33.083] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:10:33.083] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:10:33.323] Loaded PowerVR consumer services. [2025-09-24 11:10:33.323] Waiting data available... [2025-09-24 11:10:33.356] 512+0 records in [2025-09-24 11:10:33.356] 512+0 records out [2025-09-24 11:10:33.404] Starting syslogd/klogd: done [2025-09-24 11:10:33.420] DML Start [2025-09-24 11:10:33.595] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:10:33.820] DML res1: 0 [2025-09-24 11:10:34.283] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:10:34.304] Read Success [2025-09-24 11:10:34.304] Verifying certificate... [2025-09-24 11:10:34.528] Verified OK [2025-09-24 11:10:34.560] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:10:36.152] Verified OK [2025-09-24 11:10:36.152] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:10:36.773] Verified OK [2025-09-24 11:10:36.773] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:10:39.460] fs.protected_hardlinks = 1 [2025-09-24 11:10:39.476] fs.protected_symlinks = 1 [2025-09-24 11:10:39.476] kernel.modules_disabled = 1 [2025-09-24 11:10:39.667] [2025-09-24 11:10:39.667] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:10:40.898] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:10:48.626] SBL1:1210.0.1.0 [2025-09-24 11:10:48.674] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:10:50.241] SBL2:1210.0.1.0 [2025-09-24 11:10:50.273] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:10:50.385] j-A [2025-09-24 11:10:57.762] The R5 Autosar Classic is running [2025-09-24 11:10:57.762] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:10:57.762] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:10:58.368] INIT: version 2.96 booting [2025-09-24 11:10:58.481] INIT: Entering runlevel: 5 [2025-09-24 11:10:58.625] mtd24 attached [2025-09-24 11:10:58.641] mtd28 attached [2025-09-24 11:10:58.657] mtd32 attached [2025-09-24 11:10:58.705] RTNETLINK answers: File exists [2025-09-24 11:10:58.705] ubi0:textures is mounted. [2025-09-24 11:10:58.767] ubi1:animations is mounted. [2025-09-24 11:10:58.767] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:10:58.767] ubi2:dml_code is mounted. [2025-09-24 11:10:58.767] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:10:58.767] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:10:58.767] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:10:58.767] data.LB_FadeInType0=100 [2025-09-24 11:10:58.767] data.CHLH_FadeInType0=0 [2025-09-24 11:10:58.767] data.WU_FadeInDelay=0 [2025-09-24 11:10:58.767] max_time_out=0 [2025-09-24 11:10:58.767] No splash screen [2025-09-24 11:10:58.767] stop dss Done [2025-09-24 11:10:58.767] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:10:58.836] /dev/mem opened. [2025-09-24 11:10:58.836] Memory mapped at address 0xffffa0101000. [2025-09-24 11:10:58.836] Read at address 0x00600018 (0xffffa0101018): 0x00000000 [2025-09-24 11:10:58.836] Write at address 0x00600018 (0xffffa0101018): 0x00400040, readback 0x00400040 [2025-09-24 11:10:58.867] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:10:58.899] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:10:59.059] Loaded PowerVR consumer services. [2025-09-24 11:10:59.118] Waiting data available... [2025-09-24 11:10:59.118] 512+0 records in [2025-09-24 11:10:59.118] 512+0 records out [2025-09-24 11:10:59.165] Starting syslogd/klogd: done [2025-09-24 11:10:59.181] DML Start [2025-09-24 11:10:59.341] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:10:59.565] DML res1: 0 [2025-09-24 11:10:59.991] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:10:59.991] Read Success [2025-09-24 11:10:59.991] Verifying certificate... [2025-09-24 11:11:00.247] Verified OK [2025-09-24 11:11:00.280] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:11:01.926] Verified OK [2025-09-24 11:11:01.926] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:11:02.534] Verified OK [2025-09-24 11:11:02.534] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:11:05.252] fs.protected_hardlinks = 1 [2025-09-24 11:11:05.268] fs.protected_symlinks = 1 [2025-09-24 11:11:05.268] kernel.modules_disabled = 1 [2025-09-24 11:11:05.460] [2025-09-24 11:11:05.460] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:11:06.672] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:11:14.372] SBL1:1210.0.1.0 [2025-09-24 11:11:14.420] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:11:15.987] SBL2:1210.0.1.0 [2025-09-24 11:11:16.019] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:11:16.131] j-A [2025-09-24 11:11:23.486] The R5 Autosar Classic is running [2025-09-24 11:11:23.486] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:11:23.507] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:11:24.115] INIT: version 2.96 booting [2025-09-24 11:11:24.227] INIT: Entering runlevel: 5 [2025-09-24 11:11:24.370] mtd24 attached [2025-09-24 11:11:24.386] mtd28 attached [2025-09-24 11:11:24.402] mtd32 attached [2025-09-24 11:11:24.485] RTNETLINK answers: File exists [2025-09-24 11:11:24.485] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:11:24.485] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:11:24.485] ubi0:textures is mounted. [2025-09-24 11:11:24.485] ubi1:animations is mounted. [2025-09-24 11:11:24.485] ubi2:dml_code is mounted. [2025-09-24 11:11:24.485] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:11:24.485] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:11:24.485] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:11:24.511] data.LB_FadeInType0=100 [2025-09-24 11:11:24.511] data.CHLH_FadeInType0=0 [2025-09-24 11:11:24.511] data.WU_FadeInDelay=0 [2025-09-24 11:11:24.511] max_time_out=0 [2025-09-24 11:11:24.511] No splash screen [2025-09-24 11:11:24.511] stop dss Done [2025-09-24 11:11:24.575] /dev/mem opened. [2025-09-24 11:11:24.575] Memory mapped at address 0xffff9c0a1000. [2025-09-24 11:11:24.606] Read at address 0x00600018 (0xffff9c0a1018): 0x00000000 [2025-09-24 11:11:24.606] Write at address 0x00600018 (0xffff9c0a1018): 0x00400040, readback 0x00400040 [2025-09-24 11:11:24.606] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:11:24.606] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:11:24.814] Loaded PowerVR consumer services. [2025-09-24 11:11:24.830] 512+0 records in [2025-09-24 11:11:24.830] 512+0 records out [2025-09-24 11:11:24.878] Starting syslogd/klogd: done [2025-09-24 11:11:24.910] Waiting data available... [2025-09-24 11:11:24.910] DML Start [2025-09-24 11:11:25.054] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:11:25.278] DML res1: 0 [2025-09-24 11:11:25.758] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:11:25.779] Read Success [2025-09-24 11:11:25.779] Verifying certificate... [2025-09-24 11:11:26.018] Verified OK [2025-09-24 11:11:26.034] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:11:27.709] Verified OK [2025-09-24 11:11:27.709] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:11:28.342] Verified OK [2025-09-24 11:11:28.342] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:11:30.997] fs.protected_hardlinks = 1 [2025-09-24 11:11:30.997] fs.protected_symlinks = 1 [2025-09-24 11:11:31.012] kernel.modules_disabled = 1 [2025-09-24 11:11:31.204] [2025-09-24 11:11:31.204] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:11:32.386] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:11:40.104] SBL1:1210.0.1.0 [2025-09-24 11:11:40.152] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:11:41.719] SBL2:1210.0.1.0 [2025-09-24 11:11:41.767] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:11:41.862] j-A [2025-09-24 11:11:49.218] The R5 Autosar Classic is running [2025-09-24 11:11:49.243] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:11:49.243] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:11:49.850] INIT: version 2.96 booting [2025-09-24 11:11:49.963] INIT: Entering runlevel: 5 [2025-09-24 11:11:50.123] mtd24 attached [2025-09-24 11:11:50.123] mtd28 attached [2025-09-24 11:11:50.138] mtd32 attached [2025-09-24 11:11:50.186] ubi0:textures is mounted. [2025-09-24 11:11:50.187] RTNETLINK answers: File exists [2025-09-24 11:11:50.219] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:11:50.219] ubi1:animations is mounted. [2025-09-24 11:11:50.219] ubi2:dml_code is mounted. [2025-09-24 11:11:50.219] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:11:50.219] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:11:50.219] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:11:50.254] data.LB_FadeInType0=100 [2025-09-24 11:11:50.254] data.CHLH_FadeInType0=0 [2025-09-24 11:11:50.254] data.WU_FadeInDelay=0 [2025-09-24 11:11:50.254] max_time_out=0 [2025-09-24 11:11:50.254] No splash screen [2025-09-24 11:11:50.254] stop dss Done [2025-09-24 11:11:50.254] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:11:50.328] /dev/mem opened. [2025-09-24 11:11:50.328] Memory mapped at address 0xffff93a59000. [2025-09-24 11:11:50.328] Read at address 0x00600018 (0xffff93a59018): 0x00000000 [2025-09-24 11:11:50.328] Write at address 0x00600018 (0xffff93a59018): 0x00400040, readback 0x00400040 [2025-09-24 11:11:50.352] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:11:50.352] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:11:50.416] Loaded PowerVR consumer services. [2025-09-24 11:11:50.587] Waiting data available... [2025-09-24 11:11:50.587] 512+0 records in [2025-09-24 11:11:50.587] 512+0 records out [2025-09-24 11:11:50.619] Starting syslogd/klogd: done [2025-09-24 11:11:50.635] DML Start [2025-09-24 11:11:50.810] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:11:51.050] DML res1: 0 [2025-09-24 11:11:51.464] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:11:51.464] Read Success [2025-09-24 11:11:51.464] Verifying certificate... [2025-09-24 11:11:51.688] Verified OK [2025-09-24 11:11:51.704] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:11:53.367] Verified OK [2025-09-24 11:11:53.383] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:11:53.975] Verified OK [2025-09-24 11:11:53.975] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:11:56.736] fs.protected_hardlinks = 1 [2025-09-24 11:11:56.736] fs.protected_symlinks = 1 [2025-09-24 11:11:56.736] kernel.modules_disabled = 1 [2025-09-24 11:11:56.913] [2025-09-24 11:11:56.913] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:11:58.053] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:12:05.834] SBL1:1210.0.1.0 [2025-09-24 11:12:05.866] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:12:07.449] SBL2:1210.0.1.0 [2025-09-24 11:12:07.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:12:07.594] j-A [2025-09-24 11:12:14.965] The R5 Autosar Classic is running [2025-09-24 11:12:14.965] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:12:14.965] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:12:15.573] INIT: version 2.96 booting [2025-09-24 11:12:15.685] INIT: Entering runlevel: 5 [2025-09-24 11:12:15.844] mtd24 attached [2025-09-24 11:12:15.844] mtd28 attached [2025-09-24 11:12:15.860] mtd32 attached [2025-09-24 11:12:15.892] ubi0:textures is mounted. [2025-09-24 11:12:15.976] RTNETLINK answers: File exists [2025-09-24 11:12:15.976] ubi2:dml_code is mounted. [2025-09-24 11:12:15.976] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:12:15.976] ubi1:animations is mounted. [2025-09-24 11:12:15.976] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:12:15.976] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:12:15.976] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:12:15.976] data.LB_FadeInType0=100 [2025-09-24 11:12:15.976] data.CHLH_FadeInType0=0 [2025-09-24 11:12:15.976] data.WU_FadeInDelay=0 [2025-09-24 11:12:15.976] max_time_out=0 [2025-09-24 11:12:15.976] No splash screen [2025-09-24 11:12:15.976] stop dss Done [2025-09-24 11:12:15.976] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:12:16.039] /dev/mem opened. [2025-09-24 11:12:16.039] Memory mapped at address 0xffffb4075000. [2025-09-24 11:12:16.039] Read at address 0x00600018 (0xffffb4075018): 0x00000000 [2025-09-24 11:12:16.039] Write at address 0x00600018 (0xffffb4075018): 0x00400040, readback 0x00400040 [2025-09-24 11:12:16.071] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:12:16.087] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:12:16.168] Loaded PowerVR consumer services. [2025-09-24 11:12:16.323] Waiting data available... [2025-09-24 11:12:16.323] 512+0 records in [2025-09-24 11:12:16.323] 512+0 records out [2025-09-24 11:12:16.339] Starting syslogd/klogd: done [2025-09-24 11:12:16.355] DML Start [2025-09-24 11:12:16.499] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:12:16.786] DML res1: 0 [2025-09-24 11:12:17.154] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:12:17.175] Read Success [2025-09-24 11:12:17.175] Verifying certificate... [2025-09-24 11:12:17.399] Verified OK [2025-09-24 11:12:17.415] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:12:19.071] Verified OK [2025-09-24 11:12:19.071] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:12:19.630] Verified OK [2025-09-24 11:12:19.630] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:12:22.380] fs.protected_hardlinks = 1 [2025-09-24 11:12:22.396] fs.protected_symlinks = 1 [2025-09-24 11:12:22.396] kernel.modules_disabled = 1 [2025-09-24 11:12:22.604] [2025-09-24 11:12:22.604] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:12:23.851] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:12:31.570] SBL1:1210.0.1.0 [2025-09-24 11:12:31.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:12:33.184] SBL2:1210.0.1.0 [2025-09-24 11:12:33.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:12:33.328] j-A [2025-09-24 11:12:40.704] The R5 Autosar Classic is running [2025-09-24 11:12:40.704] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:12:40.704] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:12:41.310] INIT: version 2.96 booting [2025-09-24 11:12:41.423] INIT: Entering runlevel: 5 [2025-09-24 11:12:41.582] mtd24 attached [2025-09-24 11:12:41.582] mtd32 attached [2025-09-24 11:12:41.598] mtd28 attached [2025-09-24 11:12:41.646] RTNETLINK answers: File exists [2025-09-24 11:12:41.715] ubi0:textures is mounted. [2025-09-24 11:12:41.715] ubi1:dml_code is mounted. [2025-09-24 11:12:41.715] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:12:41.715] ubi2:animations is mounted. [2025-09-24 11:12:41.715] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:12:41.715] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:12:41.715] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:12:41.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:12:41.715] data.LB_FadeInType0=100 [2025-09-24 11:12:41.715] data.CHLH_FadeInType0=0 [2025-09-24 11:12:41.715] data.WU_FadeInDelay=0 [2025-09-24 11:12:41.715] max_time_out=0 [2025-09-24 11:12:41.715] No splash screen [2025-09-24 11:12:41.715] stop dss Done [2025-09-24 11:12:41.762] /dev/mem opened. [2025-09-24 11:12:41.795] Memory mapped at address 0xffff8600a000. [2025-09-24 11:12:41.795] Read at address 0x00600018 (0xffff8600a018): 0x00000000 [2025-09-24 11:12:41.795] Write at address 0x00600018 (0xffff8600a018): 0x00400040, readback 0x00400040 [2025-09-24 11:12:41.811] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:12:41.827] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:12:41.906] Loaded PowerVR consumer services. [2025-09-24 11:12:42.061] Waiting data available... [2025-09-24 11:12:42.061] 512+0 records in [2025-09-24 11:12:42.061] 512+0 records out [2025-09-24 11:12:42.078] Starting syslogd/klogd: done [2025-09-24 11:12:42.110] DML Start [2025-09-24 11:12:42.285] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:12:42.541] DML res1: 0 [2025-09-24 11:12:42.945] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:12:42.945] Read Success [2025-09-24 11:12:42.945] Verifying certificate... [2025-09-24 11:12:43.169] Verified OK [2025-09-24 11:12:43.185] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:12:44.865] Verified OK [2025-09-24 11:12:44.865] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:12:45.431] Verified OK [2025-09-24 11:12:45.431] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:12:47.936] fs.protected_hardlinks = 1 [2025-09-24 11:12:47.936] fs.protected_symlinks = 1 [2025-09-24 11:12:47.936] kernel.modules_disabled = 1 [2025-09-24 11:12:48.128] [2025-09-24 11:12:48.128] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:12:49.584] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:12:57.319] SBL1:1210.0.1.0 [2025-09-24 11:12:57.351] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:12:58.935] SBL2:1210.0.1.0 [2025-09-24 11:12:58.966] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:12:59.078] j-A [2025-09-24 11:13:06.453] The R5 Autosar Classic is running [2025-09-24 11:13:06.453] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:13:06.453] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:13:07.060] INIT: version 2.96 booting [2025-09-24 11:13:07.172] INIT: Entering runlevel: 5 [2025-09-24 11:13:07.332] mtd28 attached [2025-09-24 11:13:07.332] mtd24 attached [2025-09-24 11:13:07.348] mtd32 attached [2025-09-24 11:13:07.364] ubi0:animations is mounted. [2025-09-24 11:13:07.396] RTNETLINK answers: File exists [2025-09-24 11:13:07.456] ubi1:textures is mounted. [2025-09-24 11:13:07.456] ubi2:dml_code is mounted. [2025-09-24 11:13:07.456] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:13:07.456] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:13:07.456] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:13:07.456] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:13:07.456] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:13:07.456] data.LB_FadeInType0=100 [2025-09-24 11:13:07.456] data.CHLH_FadeInType0=0 [2025-09-24 11:13:07.456] data.WU_FadeInDelay=0 [2025-09-24 11:13:07.456] max_time_out=0 [2025-09-24 11:13:07.456] No splash screen [2025-09-24 11:13:07.456] stop dss Done [2025-09-24 11:13:07.488] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:13:07.532] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:13:07.532] /dev/mem opened. [2025-09-24 11:13:07.532] Memory mapped at address 0xffff92076000. [2025-09-24 11:13:07.532] Read at address 0x00600018 (0xffff92076018): 0x00000000 [2025-09-24 11:13:07.532] Write at address 0x00600018 (0xffff92076018): 0x00400040, readback 0x00400040 [2025-09-24 11:13:07.661] Loaded PowerVR consumer services. [2025-09-24 11:13:07.800] Waiting data available... [2025-09-24 11:13:07.800] 512+0 records in [2025-09-24 11:13:07.800] 512+0 records out [2025-09-24 11:13:07.815] Starting syslogd/klogd: done [2025-09-24 11:13:07.831] DML Start [2025-09-24 11:13:08.024] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:13:08.247] DML res1: 0 [2025-09-24 11:13:08.663] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:13:08.684] Read Success [2025-09-24 11:13:08.684] Verifying certificate... [2025-09-24 11:13:08.908] Verified OK [2025-09-24 11:13:08.924] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:13:10.491] Verified OK [2025-09-24 11:13:10.491] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:13:11.067] Verified OK [2025-09-24 11:13:11.067] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:13:13.864] fs.protected_hardlinks = 1 [2025-09-24 11:13:13.864] fs.protected_symlinks = 1 [2025-09-24 11:13:13.881] kernel.modules_disabled = 1 [2025-09-24 11:13:14.073] [2025-09-24 11:13:14.073] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:13:15.377] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:13:23.052] SBL1:1210.0.1.0 [2025-09-24 11:13:23.100] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:13:24.667] SBL2:1210.0.1.0 [2025-09-24 11:13:24.715] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:13:24.811] j-A [2025-09-24 11:13:32.166] The R5 Autosar Classic is running [2025-09-24 11:13:32.190] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:13:32.190] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:13:32.796] INIT: version 2.96 booting [2025-09-24 11:13:32.909] INIT: Entering runlevel: 5 [2025-09-24 11:13:33.053] mtd24 attached [2025-09-24 11:13:33.069] mtd28 attached [2025-09-24 11:13:33.085] mtd32 attached [2025-09-24 11:13:33.117] ubi0:textures is mounted. [2025-09-24 11:13:33.132] ubi1:animations is mounted. [2025-09-24 11:13:33.195] RTNETLINK answers: File exists [2025-09-24 11:13:33.195] ubi2:dml_code is mounted. [2025-09-24 11:13:33.195] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:13:33.195] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:13:33.195] data.LB_FadeInType0=100 [2025-09-24 11:13:33.195] data.CHLH_FadeInType0=0 [2025-09-24 11:13:33.195] data.WU_FadeInDelay=0 [2025-09-24 11:13:33.195] max_time_out=0 [2025-09-24 11:13:33.195] No splash screen [2025-09-24 11:13:33.195] stop dss Done [2025-09-24 11:13:33.195] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:13:33.195] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:13:33.195] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:13:33.227] /dev/mem opened. [2025-09-24 11:13:33.227] Memory mapped at address 0xffff90e4b000. [2025-09-24 11:13:33.253] Read at address 0x00600018 (0xffff90e4b018): 0x00000000 [2025-09-24 11:13:33.253] Write at address 0x00600018 (0xffff90e4b018): 0x00400040, readback 0x00400040 [2025-09-24 11:13:33.301] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:13:33.301] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:13:33.492] Loaded PowerVR consumer services. [2025-09-24 11:13:33.508] Waiting data available... [2025-09-24 11:13:33.524] 512+0 records in [2025-09-24 11:13:33.524] 512+0 records out [2025-09-24 11:13:33.572] Starting syslogd/klogd: done [2025-09-24 11:13:33.588] DML Start [2025-09-24 11:13:33.764] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:13:33.971] DML res1: 0 [2025-09-24 11:13:34.442] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:13:34.442] Read Success [2025-09-24 11:13:34.442] Verifying certificate... [2025-09-24 11:13:34.713] Verified OK [2025-09-24 11:13:34.729] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:13:36.386] Verified OK [2025-09-24 11:13:36.386] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:13:37.036] Verified OK [2025-09-24 11:13:37.036] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:13:39.563] fs.protected_hardlinks = 1 [2025-09-24 11:13:39.563] fs.protected_symlinks = 1 [2025-09-24 11:13:39.563] kernel.modules_disabled = 1 [2025-09-24 11:13:39.771] [2025-09-24 11:13:39.771] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:13:41.029] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:13:48.795] SBL1:1210.0.1.0 [2025-09-24 11:13:48.843] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:13:50.410] SBL2:1210.0.1.0 [2025-09-24 11:13:50.457] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:13:50.554] j-A [2025-09-24 11:13:57.909] The R5 Autosar Classic is running [2025-09-24 11:13:57.932] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:13:57.932] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:13:58.540] INIT: version 2.96 booting [2025-09-24 11:13:58.651] INIT: Entering runlevel: 5 [2025-09-24 11:13:58.812] mtd24 attached [2025-09-24 11:13:58.812] mtd28 attached [2025-09-24 11:13:58.827] mtd32 attached [2025-09-24 11:13:58.875] RTNETLINK answers: File exists [2025-09-24 11:13:58.936] ubi2:dml_code is mounted. [2025-09-24 11:13:58.936] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:13:58.936] ubi1:animations is mounted. [2025-09-24 11:13:58.936] ubi0:textures is mounted. [2025-09-24 11:13:58.936] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:13:58.936] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:13:58.936] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:13:58.936] data.LB_FadeInType0=100 [2025-09-24 11:13:58.936] data.CHLH_FadeInType0=0 [2025-09-24 11:13:58.936] data.WU_FadeInDelay=0 [2025-09-24 11:13:58.936] max_time_out=0 [2025-09-24 11:13:58.936] No splash screen [2025-09-24 11:13:58.936] stop dss Done [2025-09-24 11:13:58.936] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:13:59.033] /dev/mem opened. [2025-09-24 11:13:59.033] Memory mapped at address 0xffffa5646000. [2025-09-24 11:13:59.033] Read at address 0x00600018 (0xffffa5646018): 0x00000000 [2025-09-24 11:13:59.033] Write at address 0x00600018 (0xffffa5646018): 0x00400040, readback 0x00400040 [2025-09-24 11:13:59.033] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:13:59.033] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:13:59.193] Loaded PowerVR consumer services. [2025-09-24 11:13:59.273] 512+0 records in [2025-09-24 11:13:59.273] 512+0 records out [2025-09-24 11:13:59.288] Waiting data available... [2025-09-24 11:13:59.304] Starting syslogd/klogd: done [2025-09-24 11:13:59.321] DML Start [2025-09-24 11:13:59.512] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:13:59.720] DML res1: 0 [2025-09-24 11:14:00.164] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:14:00.164] Read Success [2025-09-24 11:14:00.164] Verifying certificate... [2025-09-24 11:14:00.404] Verified OK [2025-09-24 11:14:00.435] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:14:02.082] Verified OK [2025-09-24 11:14:02.106] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:14:02.804] Verified OK [2025-09-24 11:14:02.804] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:14:05.458] fs.protected_hardlinks = 1 [2025-09-24 11:14:05.474] fs.protected_symlinks = 1 [2025-09-24 11:14:05.474] kernel.modules_disabled = 1 [2025-09-24 11:14:05.682] [2025-09-24 11:14:05.682] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:14:06.814] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:14:14.557] SBL1:1210.0.1.0 [2025-09-24 11:14:14.588] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:14:16.172] SBL2:1210.0.1.0 [2025-09-24 11:14:16.203] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:14:16.315] j-A [2025-09-24 11:14:23.655] The R5 Autosar Classic is running [2025-09-24 11:14:23.686] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:14:23.686] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:14:24.293] INIT: version 2.96 booting [2025-09-24 11:14:24.405] INIT: Entering runlevel: 5 [2025-09-24 11:14:24.565] mtd32 attached [2025-09-24 11:14:24.565] mtd28 attached [2025-09-24 11:14:24.581] mtd24 attached [2025-09-24 11:14:24.629] RTNETLINK answers: File exists [2025-09-24 11:14:24.629] ubi0:dml_code is mounted. [2025-09-24 11:14:24.692] ubi1:animations is mounted. [2025-09-24 11:14:24.692] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:14:24.692] ubi2:textures is mounted. [2025-09-24 11:14:24.692] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:14:24.692] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:14:24.692] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:14:24.692] data.LB_FadeInType0=100 [2025-09-24 11:14:24.692] data.CHLH_FadeInType0=0 [2025-09-24 11:14:24.692] data.WU_FadeInDelay=0 [2025-09-24 11:14:24.692] max_time_out=0 [2025-09-24 11:14:24.692] No splash screen [2025-09-24 11:14:24.692] stop dss Done [2025-09-24 11:14:24.692] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:14:24.724] /dev/mem opened. [2025-09-24 11:14:24.756] Memory mapped at address 0xffff8c78c000. [2025-09-24 11:14:24.756] Read at address 0x00600018 (0xffff8c78c018): 0x00000000 [2025-09-24 11:14:24.756] Write at address 0x00600018 (0xffff8c78c018): 0x00400040, readback 0x00400040 [2025-09-24 11:14:24.756] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:14:24.772] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:14:24.932] Loaded PowerVR consumer services. [2025-09-24 11:14:25.044] Waiting data available... [2025-09-24 11:14:25.060] 512+0 records in [2025-09-24 11:14:25.060] 512+0 records out [2025-09-24 11:14:25.108] Starting syslogd/klogd: done [2025-09-24 11:14:25.124] DML Start [2025-09-24 11:14:25.299] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:14:25.491] DML res1: 0 [2025-09-24 11:14:25.908] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:14:25.908] Read Success [2025-09-24 11:14:25.923] Verifying certificate... [2025-09-24 11:14:26.195] Verified OK [2025-09-24 11:14:26.227] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:14:27.954] Verified OK [2025-09-24 11:14:27.954] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:14:28.470] Verified OK [2025-09-24 11:14:28.470] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:14:30.900] fs.protected_hardlinks = 1 [2025-09-24 11:14:30.900] fs.protected_symlinks = 1 [2025-09-24 11:14:30.916] kernel.modules_disabled = 1 [2025-09-24 11:14:31.108] [2025-09-24 11:14:31.108] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:14:32.603] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:14:40.289] SBL1:1210.0.1.0 [2025-09-24 11:14:40.321] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:14:41.904] SBL2:1210.0.1.0 [2025-09-24 11:14:41.935] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:14:42.048] j-A [2025-09-24 11:14:49.422] The R5 Autosar Classic is running [2025-09-24 11:14:49.422] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:14:49.422] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:14:50.029] INIT: version 2.96 booting [2025-09-24 11:14:50.141] INIT: Entering runlevel: 5 [2025-09-24 11:14:50.301] mtd28 attached [2025-09-24 11:14:50.301] mtd32 attached [2025-09-24 11:14:50.317] mtd24 attached [2025-09-24 11:14:50.402] RTNETLINK answers: File exists [2025-09-24 11:14:50.402] ubi0:animations is mounted. [2025-09-24 11:14:50.402] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:14:50.402] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:14:50.402] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:14:50.402] ubi2:textures is mounted. [2025-09-24 11:14:50.402] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:14:50.402] ubi1:dml_code is mounted. [2025-09-24 11:14:50.402] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:14:50.431] data.LB_FadeInType0=100 [2025-09-24 11:14:50.431] data.CHLH_FadeInType0=0 [2025-09-24 11:14:50.431] data.WU_FadeInDelay=0 [2025-09-24 11:14:50.431] max_time_out=0 [2025-09-24 11:14:50.431] No splash screen [2025-09-24 11:14:50.431] stop dss Done [2025-09-24 11:14:50.506] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:14:50.506] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:14:50.506] /dev/mem opened. [2025-09-24 11:14:50.506] Memory mapped at address 0xffff9f93d000. [2025-09-24 11:14:50.506] Read at address 0x00600018 (0xffff9f93d018): 0x00000000 [2025-09-24 11:14:50.506] Write at address 0x00600018 (0xffff9f93d018): 0x00400040, readback 0x00400040 [2025-09-24 11:14:50.634] Loaded PowerVR consumer services. [2025-09-24 11:14:50.745] Waiting data available... [2025-09-24 11:14:50.761] 512+0 records in [2025-09-24 11:14:50.761] 512+0 records out [2025-09-24 11:14:50.809] Starting syslogd/klogd: done [2025-09-24 11:14:50.825] DML Start [2025-09-24 11:14:51.001] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:14:51.241] DML res1: 0 [2025-09-24 11:14:51.669] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:14:51.669] Read Success [2025-09-24 11:14:51.669] Verifying certificate... [2025-09-24 11:14:51.909] Verified OK [2025-09-24 11:14:51.925] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:14:53.700] Verified OK [2025-09-24 11:14:53.700] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:14:54.235] Verified OK [2025-09-24 11:14:54.235] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:14:56.553] fs.protected_hardlinks = 1 [2025-09-24 11:14:56.553] fs.protected_symlinks = 1 [2025-09-24 11:14:56.569] kernel.modules_disabled = 1 [2025-09-24 11:14:56.761] [2025-09-24 11:14:56.761] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:14:58.324] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:15:06.041] SBL1:1210.0.1.0 [2025-09-24 11:15:06.089] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:15:07.656] SBL2:1210.0.1.0 [2025-09-24 11:15:07.688] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:15:07.800] j-A [2025-09-24 11:15:15.176] The R5 Autosar Classic is running [2025-09-24 11:15:15.176] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:15:15.176] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:15:15.784] INIT: version 2.96 booting [2025-09-24 11:15:15.895] INIT: Entering runlevel: 5 [2025-09-24 11:15:16.039] mtd32 attached [2025-09-24 11:15:16.055] mtd24 attached [2025-09-24 11:15:16.071] mtd28 attached [2025-09-24 11:15:16.103] RTNETLINK answers: File exists [2025-09-24 11:15:16.119] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:15:16.119] ubi0:dml_code is mounted. [2025-09-24 11:15:16.176] ubi1:textures is mounted. [2025-09-24 11:15:16.176] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:15:16.176] ubi2:animations is mounted. [2025-09-24 11:15:16.176] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:15:16.176] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:15:16.176] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:15:16.176] data.LB_FadeInType0=100 [2025-09-24 11:15:16.176] data.CHLH_FadeInType0=0 [2025-09-24 11:15:16.176] data.WU_FadeInDelay=0 [2025-09-24 11:15:16.176] max_time_out=0 [2025-09-24 11:15:16.176] No splash screen [2025-09-24 11:15:16.176] stop dss Done [2025-09-24 11:15:16.208] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:15:16.224] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:15:16.259] /dev/mem opened. [2025-09-24 11:15:16.259] Memory mapped at address 0xffff8ca7f000. [2025-09-24 11:15:16.259] Read at address 0x00600018 (0xffff8ca7f018): 0x00000000 [2025-09-24 11:15:16.259] Write at address 0x00600018 (0xffff8ca7f018): 0x00400040, readback 0x00400040 [2025-09-24 11:15:16.339] Loaded PowerVR consumer services. [2025-09-24 11:15:16.513] Waiting data available... [2025-09-24 11:15:16.513] 512+0 records in [2025-09-24 11:15:16.513] 512+0 records out [2025-09-24 11:15:16.545] Starting syslogd/klogd: done [2025-09-24 11:15:16.577] DML Start [2025-09-24 11:15:16.753] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:15:16.976] DML res1: 0 [2025-09-24 11:15:17.450] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:15:17.450] Read Success [2025-09-24 11:15:17.450] Verifying certificate... [2025-09-24 11:15:17.674] Verified OK [2025-09-24 11:15:17.706] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:15:19.289] Verified OK [2025-09-24 11:15:19.289] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:15:19.912] Verified OK [2025-09-24 11:15:19.912] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:15:22.615] fs.protected_hardlinks = 1 [2025-09-24 11:15:22.615] fs.protected_symlinks = 1 [2025-09-24 11:15:22.631] kernel.modules_disabled = 1 [2025-09-24 11:15:22.822] [2025-09-24 11:15:22.822] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:15:24.027] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:15:31.799] SBL1:1210.0.1.0 [2025-09-24 11:15:31.831] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:15:33.414] SBL2:1210.0.1.0 [2025-09-24 11:15:33.446] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:15:33.558] j-A [2025-09-24 11:15:40.934] The R5 Autosar Classic is running [2025-09-24 11:15:40.934] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:15:40.934] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:15:41.541] INIT: version 2.96 booting [2025-09-24 11:15:41.653] INIT: Entering runlevel: 5 [2025-09-24 11:15:41.813] mtd32 attached [2025-09-24 11:15:41.813] mtd24 attached [2025-09-24 11:15:41.829] mtd28 attached [2025-09-24 11:15:41.877] ubi0:dml_code is mounted. [2025-09-24 11:15:41.940] RTNETLINK answers: File exists [2025-09-24 11:15:41.940] ubi2:animations is mounted. [2025-09-24 11:15:41.940] ubi1:textures is mounted. [2025-09-24 11:15:41.940] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:15:41.940] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:15:41.940] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:15:41.940] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:15:41.940] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:15:41.940] data.LB_FadeInType0=100 [2025-09-24 11:15:41.940] data.CHLH_FadeInType0=0 [2025-09-24 11:15:41.940] data.WU_FadeInDelay=0 [2025-09-24 11:15:41.940] max_time_out=0 [2025-09-24 11:15:41.940] No splash screen [2025-09-24 11:15:41.940] stop dss Done [2025-09-24 11:15:42.018] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:15:42.018] /dev/mem opened. [2025-09-24 11:15:42.018] Memory mapped at address 0xffff8d744000. [2025-09-24 11:15:42.018] Read at address 0x00600018 (0xffff8d744018): 0x00000000 [2025-09-24 11:15:42.018] Write at address 0x00600018 (0xffff8d744018): 0x00400040, readback 0x00400040 [2025-09-24 11:15:42.018] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:15:42.225] Loaded PowerVR consumer services. [2025-09-24 11:15:42.274] Waiting data available... [2025-09-24 11:15:42.290] 512+0 records in [2025-09-24 11:15:42.290] 512+0 records out [2025-09-24 11:15:42.322] Starting syslogd/klogd: done [2025-09-24 11:15:42.354] DML Start [2025-09-24 11:15:42.529] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:15:42.753] DML res1: 0 [2025-09-24 11:15:43.232] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:15:43.232] Read Success [2025-09-24 11:15:43.232] Verifying certificate... [2025-09-24 11:15:43.503] Verified OK [2025-09-24 11:15:43.519] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:15:45.263] Verified OK [2025-09-24 11:15:45.263] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:15:45.811] Verified OK [2025-09-24 11:15:45.811] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:15:48.322] fs.protected_hardlinks = 1 [2025-09-24 11:15:48.322] fs.protected_symlinks = 1 [2025-09-24 11:15:48.338] kernel.modules_disabled = 1 [2025-09-24 11:15:48.513] [2025-09-24 11:15:48.513] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:15:49.833] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:15:57.534] SBL1:1210.0.1.0 [2025-09-24 11:15:57.582] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:15:59.149] SBL2:1210.0.1.0 [2025-09-24 11:15:59.197] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 11:15:59.293] j-A [2025-09-24 11:16:06.648] The R5 Autosar Classic is running [2025-09-24 11:16:06.671] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:16:06.671] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:16:07.278] INIT: version 2.96 booting [2025-09-24 11:16:07.390] INIT: Entering runlevel: 5 [2025-09-24 11:16:07.550] mtd24 attached [2025-09-24 11:16:07.550] mtd28 attached [2025-09-24 11:16:07.582] mtd32 attached [2025-09-24 11:16:07.598] ubi0:textures is mounted. [2025-09-24 11:16:07.614] ubi1:animations is mounted. [2025-09-24 11:16:07.644] ubi2:dml_code is mounted. [2025-09-24 11:16:07.644] RTNETLINK answers: File exists [2025-09-24 11:16:07.690] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:16:07.690] data.LB_FadeInType0=100 [2025-09-24 11:16:07.690] data.CHLH_FadeInType0=0 [2025-09-24 11:16:07.690] data.WU_FadeInDelay=0 [2025-09-24 11:16:07.690] max_time_out=0 [2025-09-24 11:16:07.690] No splash screen [2025-09-24 11:16:07.690] stop dss Done [2025-09-24 11:16:07.690] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:16:07.690] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:16:07.690] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:16:07.690] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:16:07.741] /dev/mem opened. [2025-09-24 11:16:07.741] Memory mapped at address 0xffffb21c7000. [2025-09-24 11:16:07.741] Read at address 0x00600018 (0xffffb21c7018): 0x00000000 [2025-09-24 11:16:07.741] Write at address 0x00600018 (0xffffb21c7018): 0x00400040, readback 0x00400040 [2025-09-24 11:16:07.779] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:16:07.779] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:16:07.860] Loaded PowerVR consumer services. [2025-09-24 11:16:08.028] Waiting data available... [2025-09-24 11:16:08.028] 512+0 records in [2025-09-24 11:16:08.028] 512+0 records out [2025-09-24 11:16:08.044] Starting syslogd/klogd: done [2025-09-24 11:16:08.060] DML Start [2025-09-24 11:16:08.236] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:16:08.476] DML res1: 0 [2025-09-24 11:16:08.901] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:16:08.901] Read Success [2025-09-24 11:16:08.901] Verifying certificate... [2025-09-24 11:16:09.125] Verified OK [2025-09-24 11:16:09.141] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:16:10.852] Verified OK [2025-09-24 11:16:10.852] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:16:11.468] Verified OK [2025-09-24 11:16:11.468] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:16:14.043] fs.protected_hardlinks = 1 [2025-09-24 11:16:14.070] fs.protected_symlinks = 1 [2025-09-24 11:16:14.070] kernel.modules_disabled = 1 [2025-09-24 11:16:14.246] [2025-09-24 11:16:14.246] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:16:15.489] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:16:23.283] SBL1:1210.0.1.0 [2025-09-24 11:16:23.315] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:16:24.898] SBL2:1210.0.1.0 [2025-09-24 11:16:24.930] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:16:25.041] j-A [2025-09-24 11:16:32.381] The R5 Autosar Classic is running [2025-09-24 11:16:32.412] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:16:32.412] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:16:33.020] INIT: version 2.96 booting [2025-09-24 11:16:33.132] INIT: Entering runlevel: 5 [2025-09-24 11:16:33.275] mtd24 attached [2025-09-24 11:16:33.291] mtd32 attached [2025-09-24 11:16:33.307] mtd28 attached [2025-09-24 11:16:33.323] ubi0:textures is mounted. [2025-09-24 11:16:33.355] ubi1:dml_code is mounted. [2025-09-24 11:16:33.355] RTNETLINK answers: File exists [2025-09-24 11:16:33.414] ubi2:animations is mounted. [2025-09-24 11:16:33.414] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:16:33.414] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:16:33.414] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:16:33.414] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:16:33.414] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:16:33.414] data.LB_FadeInType0=100 [2025-09-24 11:16:33.414] data.CHLH_FadeInType0=0 [2025-09-24 11:16:33.414] data.WU_FadeInDelay=0 [2025-09-24 11:16:33.414] max_time_out=0 [2025-09-24 11:16:33.414] No splash screen [2025-09-24 11:16:33.414] stop dss Done [2025-09-24 11:16:33.461] /dev/mem opened. [2025-09-24 11:16:33.487] Memory mapped at address 0xffff937eb000. [2025-09-24 11:16:33.487] Read at address 0x00600018 (0xffff937eb018): 0x00000000 [2025-09-24 11:16:33.487] Write at address 0x00600018 (0xffff937eb018): 0x00400040, readback 0x00400040 [2025-09-24 11:16:33.519] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:16:33.535] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:16:33.711] Loaded PowerVR consumer services. [2025-09-24 11:16:33.743] Waiting data available... [2025-09-24 11:16:33.759] 512+0 records in [2025-09-24 11:16:33.759] 512+0 records out [2025-09-24 11:16:33.775] Starting syslogd/klogd: done [2025-09-24 11:16:33.807] DML Start [2025-09-24 11:16:33.999] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:16:34.254] DML res1: 0 [2025-09-24 11:16:34.652] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:16:34.652] Read Success [2025-09-24 11:16:34.652] Verifying certificate... [2025-09-24 11:16:34.892] Verified OK [2025-09-24 11:16:34.908] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:16:36.604] Verified OK [2025-09-24 11:16:36.604] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:16:37.195] Verified OK [2025-09-24 11:16:37.195] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:16:39.849] fs.protected_hardlinks = 1 [2025-09-24 11:16:39.849] fs.protected_symlinks = 1 [2025-09-24 11:16:39.865] kernel.modules_disabled = 1 [2025-09-24 11:16:40.058] [2025-09-24 11:16:40.058] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:16:41.296] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:16:49.024] SBL1:1210.0.1.0 [2025-09-24 11:16:49.072] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:16:50.639] SBL2:1210.0.1.0 [2025-09-24 11:16:50.688] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:16:50.783] j-A [2025-09-24 11:16:58.138] The R5 Autosar Classic is running [2025-09-24 11:16:58.138] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:16:58.159] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:16:58.766] INIT: version 2.96 booting [2025-09-24 11:16:58.879] INIT: Entering runlevel: 5 [2025-09-24 11:16:59.039] mtd24 attached [2025-09-24 11:16:59.039] mtd28 attached [2025-09-24 11:16:59.055] mtd32 attached [2025-09-24 11:16:59.087] ubi0:textures is mounted. [2025-09-24 11:16:59.102] RTNETLINK answers: File exists [2025-09-24 11:16:59.166] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:16:59.166] ubi1:animations is mounted. [2025-09-24 11:16:59.166] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:16:59.166] ubi2:dml_code is mounted. [2025-09-24 11:16:59.166] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:16:59.166] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:16:59.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:16:59.166] data.LB_FadeInType0=100 [2025-09-24 11:16:59.166] data.CHLH_FadeInType0=0 [2025-09-24 11:16:59.166] data.WU_FadeInDelay=0 [2025-09-24 11:16:59.166] max_time_out=0 [2025-09-24 11:16:59.166] No splash screen [2025-09-24 11:16:59.166] stop dss Done [2025-09-24 11:16:59.198] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:16:59.214] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:16:59.247] /dev/mem opened. [2025-09-24 11:16:59.247] Memory mapped at address 0xffff89e87000. [2025-09-24 11:16:59.247] Read at address 0x00600018 (0xffff89e87018): 0x00000000 [2025-09-24 11:16:59.247] Write at address 0x00600018 (0xffff89e87018): 0x00400040, readback 0x00400040 [2025-09-24 11:16:59.311] Loaded PowerVR consumer services. [2025-09-24 11:16:59.512] Waiting data available... [2025-09-24 11:16:59.512] 512+0 records in [2025-09-24 11:16:59.512] 512+0 records out [2025-09-24 11:16:59.528] Starting syslogd/klogd: done [2025-09-24 11:16:59.544] DML Start [2025-09-24 11:16:59.752] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:17:00.008] DML res1: 0 [2025-09-24 11:17:00.388] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:17:00.388] Read Success [2025-09-24 11:17:00.388] Verifying certificate... [2025-09-24 11:17:00.676] Verified OK [2025-09-24 11:17:00.692] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:17:02.283] Verified OK [2025-09-24 11:17:02.283] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:17:02.929] Verified OK [2025-09-24 11:17:02.929] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:17:05.471] fs.protected_hardlinks = 1 [2025-09-24 11:17:05.471] fs.protected_symlinks = 1 [2025-09-24 11:17:05.487] kernel.modules_disabled = 1 [2025-09-24 11:17:05.679] [2025-09-24 11:17:05.679] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:17:07.069] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:17:14.770] SBL1:1210.0.1.0 [2025-09-24 11:17:14.818] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:17:16.384] SBL2:1210.0.1.0 [2025-09-24 11:17:16.432] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:17:16.528] j-A [2025-09-24 11:17:23.883] The R5 Autosar Classic is running [2025-09-24 11:17:23.907] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:17:23.907] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:17:24.515] INIT: version 2.96 booting [2025-09-24 11:17:24.627] INIT: Entering runlevel: 5 [2025-09-24 11:17:24.770] mtd24 attached [2025-09-24 11:17:24.786] mtd32 attached [2025-09-24 11:17:24.802] mtd28 attached [2025-09-24 11:17:24.835] ubi0:textures is mounted. [2025-09-24 11:17:24.851] RTNETLINK answers: File exists [2025-09-24 11:17:24.851] ubi1:dml_code is mounted. [2025-09-24 11:17:24.907] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:17:24.907] ubi2:animations is mounted. [2025-09-24 11:17:24.907] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:17:24.907] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:17:24.907] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:17:24.907] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:17:24.907] data.LB_FadeInType0=100 [2025-09-24 11:17:24.907] data.CHLH_FadeInType0=0 [2025-09-24 11:17:24.907] data.WU_FadeInDelay=0 [2025-09-24 11:17:24.907] max_time_out=0 [2025-09-24 11:17:24.907] No splash screen [2025-09-24 11:17:24.907] stop dss Done [2025-09-24 11:17:24.955] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:17:24.955] /dev/mem opened. [2025-09-24 11:17:24.955] Memory mapped at address 0xffffa235d000. [2025-09-24 11:17:24.987] Read at address 0x00600018 (0xffffa235d018): 0x00000000 [2025-09-24 11:17:24.987] Write at address 0x00600018 (0xffffa235d018): 0x00400040, readback 0x00400040 [2025-09-24 11:17:24.987] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:17:25.131] Loaded PowerVR consumer services. [2025-09-24 11:17:25.242] Waiting data available... [2025-09-24 11:17:25.258] 512+0 records in [2025-09-24 11:17:25.258] 512+0 records out [2025-09-24 11:17:25.274] Starting syslogd/klogd: done [2025-09-24 11:17:25.306] DML Start [2025-09-24 11:17:25.466] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:17:25.706] DML res1: 0 [2025-09-24 11:17:26.138] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:17:26.154] Read Success [2025-09-24 11:17:26.154] Verifying certificate... [2025-09-24 11:17:26.393] Verified OK [2025-09-24 11:17:26.409] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:17:28.102] Verified OK [2025-09-24 11:17:28.102] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:17:28.741] Verified OK [2025-09-24 11:17:28.741] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:17:31.428] fs.protected_hardlinks = 1 [2025-09-24 11:17:31.428] fs.protected_symlinks = 1 [2025-09-24 11:17:31.443] kernel.modules_disabled = 1 [2025-09-24 11:17:31.652] [2025-09-24 11:17:31.652] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:17:32.787] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:17:40.520] SBL1:1210.0.1.0 [2025-09-24 11:17:40.552] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:17:42.134] SBL2:1210.0.1.0 [2025-09-24 11:17:42.166] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:17:42.279] j-A [2025-09-24 11:17:49.654] The R5 Autosar Classic is running [2025-09-24 11:17:49.654] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:17:49.654] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:17:50.261] INIT: version 2.96 booting [2025-09-24 11:17:50.373] INIT: Entering runlevel: 5 [2025-09-24 11:17:50.517] mtd24 attached [2025-09-24 11:17:50.533] mtd28 attached [2025-09-24 11:17:50.549] mtd32 attached [2025-09-24 11:17:50.564] ubi0:textures is mounted. [2025-09-24 11:17:50.597] RTNETLINK answers: File exists [2025-09-24 11:17:50.656] ubi2:dml_code is mounted. [2025-09-24 11:17:50.656] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:17:50.656] ubi1:animations is mounted. [2025-09-24 11:17:50.656] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:17:50.656] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:17:50.656] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:17:50.656] data.LB_FadeInType0=100 [2025-09-24 11:17:50.656] data.CHLH_FadeInType0=0 [2025-09-24 11:17:50.656] data.WU_FadeInDelay=0 [2025-09-24 11:17:50.656] max_time_out=0 [2025-09-24 11:17:50.656] No splash screen [2025-09-24 11:17:50.656] stop dss Done [2025-09-24 11:17:50.656] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:17:50.724] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:17:50.724] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:17:50.724] /dev/mem opened. [2025-09-24 11:17:50.724] Memory mapped at address 0xffff83226000. [2025-09-24 11:17:50.724] Read at address 0x00600018 (0xffff83226018): 0x00000000 [2025-09-24 11:17:50.724] Write at address 0x00600018 (0xffff83226018): 0x00400040, readback 0x00400040 [2025-09-24 11:17:50.868] Loaded PowerVR consumer services. [2025-09-24 11:17:50.979] Waiting data available... [2025-09-24 11:17:50.996] 512+0 records in [2025-09-24 11:17:50.996] 512+0 records out [2025-09-24 11:17:51.044] Starting syslogd/klogd: done [2025-09-24 11:17:51.060] DML Start [2025-09-24 11:17:51.219] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:17:51.443] DML res1: 0 [2025-09-24 11:17:51.923] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:17:51.944] Read Success [2025-09-24 11:17:51.944] Verifying certificate... [2025-09-24 11:17:52.184] Verified OK [2025-09-24 11:17:52.216] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:17:53.904] Verified OK [2025-09-24 11:17:53.904] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:17:54.415] Verified OK [2025-09-24 11:17:54.415] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:17:56.926] fs.protected_hardlinks = 1 [2025-09-24 11:17:56.926] fs.protected_symlinks = 1 [2025-09-24 11:17:56.942] kernel.modules_disabled = 1 [2025-09-24 11:17:57.150] [2025-09-24 11:17:57.150] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:17:58.538] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:18:00.833] [2025-09-24 11:18:06.268] SBL1:1210.0.1.0 [2025-09-24 11:18:06.300] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:18:07.883] SBL2:1210.0.1.0 [2025-09-24 11:18:07.915] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:18:08.026] j-A [2025-09-24 11:18:15.401] The R5 Autosar Classic is running [2025-09-24 11:18:15.401] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:18:15.401] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:18:16.009] INIT: version 2.96 booting [2025-09-24 11:18:16.121] INIT: Entering runlevel: 5 [2025-09-24 11:18:16.265] mtd24 attached [2025-09-24 11:18:16.281] mtd28 attached [2025-09-24 11:18:16.296] mtd32 attached [2025-09-24 11:18:16.344] RTNETLINK answers: File exists [2025-09-24 11:18:16.344] ubi0:textures is mounted. [2025-09-24 11:18:16.409] ubi1:animations is mounted. [2025-09-24 11:18:16.409] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:18:16.409] ubi2:dml_code is mounted. [2025-09-24 11:18:16.409] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:18:16.409] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:18:16.409] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:18:16.409] data.LB_FadeInType0=100 [2025-09-24 11:18:16.409] data.CHLH_FadeInType0=0 [2025-09-24 11:18:16.409] data.WU_FadeInDelay=0 [2025-09-24 11:18:16.409] max_time_out=0 [2025-09-24 11:18:16.409] No splash screen [2025-09-24 11:18:16.409] stop dss Done [2025-09-24 11:18:16.409] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:18:16.481] /dev/mem opened. [2025-09-24 11:18:16.481] Memory mapped at address 0xffffb879c000. [2025-09-24 11:18:16.481] Read at address 0x00600018 (0xffffb879c018): 0x00000000 [2025-09-24 11:18:16.481] Write at address 0x00600018 (0xffffb879c018): 0x00400040, readback 0x00400040 [2025-09-24 11:18:16.497] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:18:16.513] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:18:16.624] Loaded PowerVR consumer services. [2025-09-24 11:18:16.753] Waiting data available... [2025-09-24 11:18:16.753] 512+0 records in [2025-09-24 11:18:16.769] 512+0 records out [2025-09-24 11:18:16.800] Starting syslogd/klogd: done [2025-09-24 11:18:16.816] DML Start [2025-09-24 11:18:16.992] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:18:17.216] DML res1: 0 [2025-09-24 11:18:17.685] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:18:17.685] Read Success [2025-09-24 11:18:17.685] Verifying certificate... [2025-09-24 11:18:17.924] Verified OK [2025-09-24 11:18:17.940] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:18:19.572] Verified OK [2025-09-24 11:18:19.572] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:18:20.227] Verified OK [2025-09-24 11:18:20.227] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:18:22.897] fs.protected_hardlinks = 1 [2025-09-24 11:18:22.897] fs.protected_symlinks = 1 [2025-09-24 11:18:22.897] kernel.modules_disabled = 1 [2025-09-24 11:18:23.073] [2025-09-24 11:18:23.073] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:18:24.246] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:18:31.990] SBL1:1210.0.1.0 [2025-09-24 11:18:32.022] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:18:33.604] SBL2:1210.0.1.0 [2025-09-24 11:18:33.636] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:18:33.748] j-A [2025-09-24 11:18:41.087] The R5 Autosar Classic is running [2025-09-24 11:18:41.118] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:18:41.118] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:18:41.725] INIT: version 2.96 booting [2025-09-24 11:18:41.837] INIT: Entering runlevel: 5 [2025-09-24 11:18:41.982] mtd24 attached [2025-09-24 11:18:41.997] mtd32 attached [2025-09-24 11:18:42.013] mtd28 attached [2025-09-24 11:18:42.045] ubi0:textures is mounted. [2025-09-24 11:18:42.061] RTNETLINK answers: File exists [2025-09-24 11:18:42.061] ubi1:dml_code is mounted. [2025-09-24 11:18:42.120] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:18:42.120] ubi2:animations is mounted. [2025-09-24 11:18:42.120] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:18:42.120] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:18:42.120] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:18:42.120] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:18:42.120] data.LB_FadeInType0=100 [2025-09-24 11:18:42.120] data.CHLH_FadeInType0=0 [2025-09-24 11:18:42.120] data.WU_FadeInDelay=0 [2025-09-24 11:18:42.120] max_time_out=0 [2025-09-24 11:18:42.120] No splash screen [2025-09-24 11:18:42.120] stop dss Done [2025-09-24 11:18:42.192] /dev/mem opened. [2025-09-24 11:18:42.192] Memory mapped at address 0xffffb8243000. [2025-09-24 11:18:42.192] Read at address 0x00600018 (0xffffb8243018): 0x00000000 [2025-09-24 11:18:42.192] Write at address 0x00600018 (0xffffb8243018): 0x00400040, readback 0x00400040 [2025-09-24 11:18:42.223] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:18:42.240] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:18:42.457] Loaded PowerVR consumer services. [2025-09-24 11:18:42.457] Waiting data available... [2025-09-24 11:18:42.473] 512+0 records in [2025-09-24 11:18:42.473] 512+0 records out [2025-09-24 11:18:42.505] Starting syslogd/klogd: done [2025-09-24 11:18:42.521] DML Start [2025-09-24 11:18:42.697] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:18:42.921] DML res1: 0 [2025-09-24 11:18:43.320] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:18:43.336] Read Success [2025-09-24 11:18:43.336] Verifying certificate... [2025-09-24 11:18:43.560] Verified OK [2025-09-24 11:18:43.576] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:18:45.271] Verified OK [2025-09-24 11:18:45.271] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:18:45.922] Verified OK [2025-09-24 11:18:45.922] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:18:48.576] fs.protected_hardlinks = 1 [2025-09-24 11:18:48.605] fs.protected_symlinks = 1 [2025-09-24 11:18:48.605] kernel.modules_disabled = 1 [2025-09-24 11:18:48.780] [2025-09-24 11:18:48.780] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:18:49.938] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:18:57.715] SBL1:1210.0.1.0 [2025-09-24 11:18:57.763] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 11:18:59.330] SBL2:1210.0.1.0 [2025-09-24 11:18:59.378] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:18:59.473] j-A [2025-09-24 11:19:06.829] The R5 Autosar Classic is running [2025-09-24 11:19:06.852] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:19:06.852] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:19:07.460] INIT: version 2.96 booting [2025-09-24 11:19:07.571] INIT: Entering runlevel: 5 [2025-09-24 11:19:07.731] mtd24 attached [2025-09-24 11:19:07.731] mtd28 attached [2025-09-24 11:19:07.747] mtd32 attached [2025-09-24 11:19:07.795] ubi0:textures is mounted. [2025-09-24 11:19:07.795] RTNETLINK answers: File exists [2025-09-24 11:19:07.863] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:19:07.863] ubi1:animations is mounted. [2025-09-24 11:19:07.863] ubi2:dml_code is mounted. [2025-09-24 11:19:07.863] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:19:07.863] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:19:07.863] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:19:07.863] data.LB_FadeInType0=100 [2025-09-24 11:19:07.863] data.CHLH_FadeInType0=0 [2025-09-24 11:19:07.863] data.WU_FadeInDelay=0 [2025-09-24 11:19:07.863] max_time_out=0 [2025-09-24 11:19:07.863] No splash screen [2025-09-24 11:19:07.863] stop dss Done [2025-09-24 11:19:07.863] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:19:07.947] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:19:07.947] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:19:07.947] /dev/mem opened. [2025-09-24 11:19:07.947] Memory mapped at address 0xffff96ea2000. [2025-09-24 11:19:07.947] Read at address 0x00600018 (0xffff96ea2018): 0x00000000 [2025-09-24 11:19:07.947] Write at address 0x00600018 (0xffff96ea2018): 0x00400040, readback 0x00400040 [2025-09-24 11:19:08.155] Loaded PowerVR consumer services. [2025-09-24 11:19:08.187] Waiting data available... [2025-09-24 11:19:08.203] 512+0 records in [2025-09-24 11:19:08.203] 512+0 records out [2025-09-24 11:19:08.218] Starting syslogd/klogd: done [2025-09-24 11:19:08.235] DML Start [2025-09-24 11:19:08.427] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:19:08.650] DML res1: 0 [2025-09-24 11:19:09.082] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:19:09.103] Read Success [2025-09-24 11:19:09.103] Verifying certificate... [2025-09-24 11:19:09.343] Verified OK [2025-09-24 11:19:09.359] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:19:11.147] Verified OK [2025-09-24 11:19:11.147] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:19:11.750] Verified OK [2025-09-24 11:19:11.750] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:19:14.437] fs.protected_hardlinks = 1 [2025-09-24 11:19:14.453] fs.protected_symlinks = 1 [2025-09-24 11:19:14.453] kernel.modules_disabled = 1 [2025-09-24 11:19:14.644] [2025-09-24 11:19:14.644] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:19:15.744] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:19:23.454] SBL1:1210.0.1.0 [2025-09-24 11:19:23.502] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:19:25.069] SBL2:1210.0.1.0 [2025-09-24 11:19:25.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:19:25.214] j-A [2025-09-24 11:19:32.589] The R5 Autosar Classic is running [2025-09-24 11:19:32.589] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:19:32.589] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:19:33.196] INIT: version 2.96 booting [2025-09-24 11:19:33.308] INIT: Entering runlevel: 5 [2025-09-24 11:19:33.468] mtd28 attached [2025-09-24 11:19:33.468] mtd24 attached [2025-09-24 11:19:33.484] mtd32 attached [2025-09-24 11:19:33.532] RTNETLINK answers: File exists [2025-09-24 11:19:33.532] ubi0:animations is mounted. [2025-09-24 11:19:33.574] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:19:33.574] ubi1:textures is mounted. [2025-09-24 11:19:33.574] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:19:33.574] ubi2:dml_code is mounted. [2025-09-24 11:19:33.574] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:19:33.574] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:19:33.574] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:19:33.602] data.LB_FadeInType0=100 [2025-09-24 11:19:33.602] data.CHLH_FadeInType0=0 [2025-09-24 11:19:33.602] data.WU_FadeInDelay=0 [2025-09-24 11:19:33.602] max_time_out=0 [2025-09-24 11:19:33.602] No splash screen [2025-09-24 11:19:33.602] stop dss Done [2025-09-24 11:19:33.682] /dev/mem opened. [2025-09-24 11:19:33.682] Memory mapped at address 0xffff98184000. [2025-09-24 11:19:33.682] Read at address 0x00600018 (0xffff98184018): 0x00000000 [2025-09-24 11:19:33.682] Write at address 0x00600018 (0xffff98184018): 0x00400040, readback 0x00400040 [2025-09-24 11:19:33.682] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:19:33.682] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:19:33.874] Loaded PowerVR consumer services. [2025-09-24 11:19:33.953] Waiting data available... [2025-09-24 11:19:33.970] 512+0 records in [2025-09-24 11:19:33.970] 512+0 records out [2025-09-24 11:19:34.017] Starting syslogd/klogd: done [2025-09-24 11:19:34.033] DML Start [2025-09-24 11:19:34.225] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:19:34.434] DML res1: 0 [2025-09-24 11:19:34.881] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:19:34.897] Read Success [2025-09-24 11:19:34.897] Verifying certificate... [2025-09-24 11:19:35.169] Verified OK [2025-09-24 11:19:35.201] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:19:36.888] Verified OK [2025-09-24 11:19:36.888] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:19:37.524] Verified OK [2025-09-24 11:19:37.524] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:19:40.050] fs.protected_hardlinks = 1 [2025-09-24 11:19:40.066] fs.protected_symlinks = 1 [2025-09-24 11:19:40.066] kernel.modules_disabled = 1 [2025-09-24 11:19:40.258] [2025-09-24 11:19:40.258] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:19:41.480] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:19:49.201] SBL1:1210.0.1.0 [2025-09-24 11:19:49.249] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:19:50.816] SBL2:1210.0.1.0 [2025-09-24 11:19:50.864] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:19:50.960] j-A [2025-09-24 11:19:58.317] The R5 Autosar Classic is running [2025-09-24 11:19:58.317] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:19:58.338] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:19:58.945] INIT: version 2.96 booting [2025-09-24 11:19:59.057] INIT: Entering runlevel: 5 [2025-09-24 11:19:59.201] mtd24 attached [2025-09-24 11:19:59.217] mtd28 attached [2025-09-24 11:19:59.233] mtd32 attached [2025-09-24 11:19:59.338] RTNETLINK answers: File exists [2025-09-24 11:19:59.338] ubi0:textures is mounted. [2025-09-24 11:19:59.338] ubi1:animations is mounted. [2025-09-24 11:19:59.338] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:19:59.338] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:19:59.338] ubi2:dml_code is mounted. [2025-09-24 11:19:59.338] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:19:59.338] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:19:59.338] data.LB_FadeInType0=100 [2025-09-24 11:19:59.338] data.CHLH_FadeInType0=0 [2025-09-24 11:19:59.338] data.WU_FadeInDelay=0 [2025-09-24 11:19:59.338] max_time_out=0 [2025-09-24 11:19:59.338] No splash screen [2025-09-24 11:19:59.338] stop dss Done [2025-09-24 11:19:59.338] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:19:59.414] /dev/mem opened. [2025-09-24 11:19:59.414] Memory mapped at address 0xffff8242c000. [2025-09-24 11:19:59.414] Read at address 0x00600018 (0xffff8242c018): 0x00000000 [2025-09-24 11:19:59.414] Write at address 0x00600018 (0xffff8242c018): 0x00400040, readback 0x00400040 [2025-09-24 11:19:59.414] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:19:59.414] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:19:59.510] Loaded PowerVR consumer services. [2025-09-24 11:19:59.653] Waiting data available... [2025-09-24 11:19:59.669] 512+0 records in [2025-09-24 11:19:59.669] 512+0 records out [2025-09-24 11:19:59.701] Starting syslogd/klogd: done [2025-09-24 11:19:59.717] DML Start [2025-09-24 11:19:59.894] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:20:00.101] DML res1: 0 [2025-09-24 11:20:00.593] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:20:00.593] Read Success [2025-09-24 11:20:00.593] Verifying certificate... [2025-09-24 11:20:00.848] Verified OK [2025-09-24 11:20:00.864] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:20:02.540] Verified OK [2025-09-24 11:20:02.540] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:20:03.185] Verified OK [2025-09-24 11:20:03.185] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:20:05.743] fs.protected_hardlinks = 1 [2025-09-24 11:20:05.743] fs.protected_symlinks = 1 [2025-09-24 11:20:05.759] kernel.modules_disabled = 1 [2025-09-24 11:20:05.951] [2025-09-24 11:20:05.951] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:20:07.129] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:20:14.955] SBL1:1210.0.1.0 [2025-09-24 11:20:14.987] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:20:16.571] SBL2:1210.0.1.0 [2025-09-24 11:20:16.603] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:20:16.714] j-A [2025-09-24 11:20:24.086] The R5 Autosar Classic is running [2025-09-24 11:20:24.086] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:20:24.086] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:20:24.694] INIT: version 2.96 booting [2025-09-24 11:20:24.806] INIT: Entering runlevel: 5 [2025-09-24 11:20:24.950] mtd24 attached [2025-09-24 11:20:24.966] mtd28 attached [2025-09-24 11:20:24.982] mtd32 attached [2025-09-24 11:20:24.998] ubi0:textures is mounted. [2025-09-24 11:20:25.081] ubi1:animations is mounted. [2025-09-24 11:20:25.081] RTNETLINK answers: File exists [2025-09-24 11:20:25.081] ubi2:dml_code is mounted. [2025-09-24 11:20:25.081] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:20:25.081] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:20:25.081] data.LB_FadeInType0=100 [2025-09-24 11:20:25.081] data.CHLH_FadeInType0=0 [2025-09-24 11:20:25.081] data.WU_FadeInDelay=0 [2025-09-24 11:20:25.081] max_time_out=0 [2025-09-24 11:20:25.081] No splash screen [2025-09-24 11:20:25.081] stop dss Done [2025-09-24 11:20:25.081] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:20:25.081] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:20:25.081] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:20:25.113] /dev/mem opened. [2025-09-24 11:20:25.145] Memory mapped at address 0xffff818f7000. [2025-09-24 11:20:25.145] Read at address 0x00600018 (0xffff818f7018): 0x00000000 [2025-09-24 11:20:25.145] Write at address 0x00600018 (0xffff818f7018): 0x00400040, readback 0x00400040 [2025-09-24 11:20:25.176] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:20:25.176] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:20:25.288] Loaded PowerVR consumer services. [2025-09-24 11:20:25.417] Waiting data available... [2025-09-24 11:20:25.433] 512+0 records in [2025-09-24 11:20:25.433] 512+0 records out [2025-09-24 11:20:25.465] Starting syslogd/klogd: done [2025-09-24 11:20:25.481] DML Start [2025-09-24 11:20:25.672] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:20:25.880] DML res1: 0 [2025-09-24 11:20:26.343] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:20:26.360] Read Success [2025-09-24 11:20:26.360] Verifying certificate... [2025-09-24 11:20:26.616] Verified OK [2025-09-24 11:20:26.631] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:20:28.339] Verified OK [2025-09-24 11:20:28.339] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:20:29.002] Verified OK [2025-09-24 11:20:29.002] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:20:31.529] fs.protected_hardlinks = 1 [2025-09-24 11:20:31.544] fs.protected_symlinks = 1 [2025-09-24 11:20:31.560] kernel.modules_disabled = 1 [2025-09-24 11:20:31.736] [2025-09-24 11:20:31.736] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:20:32.983] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:20:40.691] SBL1:1210.0.1.0 [2025-09-24 11:20:40.739] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:20:42.306] SBL2:1210.0.1.0 [2025-09-24 11:20:42.354] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:20:42.466] j-A [2025-09-24 11:20:49.805] The R5 Autosar Classic is running [2025-09-24 11:20:49.830] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:20:49.830] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:20:50.438] INIT: version 2.96 booting [2025-09-24 11:20:50.549] INIT: Entering runlevel: 5 [2025-09-24 11:20:50.710] mtd24 attached [2025-09-24 11:20:50.710] mtd28 attached [2025-09-24 11:20:50.726] mtd32 attached [2025-09-24 11:20:50.811] RTNETLINK answers: File exists [2025-09-24 11:20:50.811] ubi1:animations is mounted. [2025-09-24 11:20:50.811] ubi0:textures is mounted. [2025-09-24 11:20:50.811] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:20:50.811] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:20:50.811] ubi2:dml_code is mounted. [2025-09-24 11:20:50.811] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:20:50.811] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:20:50.811] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:20:50.832] data.LB_FadeInType0=100 [2025-09-24 11:20:50.832] data.CHLH_FadeInType0=0 [2025-09-24 11:20:50.832] data.WU_FadeInDelay=0 [2025-09-24 11:20:50.832] max_time_out=0 [2025-09-24 11:20:50.832] No splash screen [2025-09-24 11:20:50.832] stop dss Done [2025-09-24 11:20:50.872] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:20:50.872] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:20:50.910] /dev/mem opened. [2025-09-24 11:20:50.910] Memory mapped at address 0xffff931a6000. [2025-09-24 11:20:50.910] Read at address 0x00600018 (0xffff931a6018): 0x00000000 [2025-09-24 11:20:50.910] Write at address 0x00600018 (0xffff931a6018): 0x00400040, readback 0x00400040 [2025-09-24 11:20:50.990] Loaded PowerVR consumer services. [2025-09-24 11:20:51.166] Waiting data available... [2025-09-24 11:20:51.166] 512+0 records in [2025-09-24 11:20:51.182] 512+0 records out [2025-09-24 11:20:51.230] Starting syslogd/klogd: done [2025-09-24 11:20:51.246] DML Start [2025-09-24 11:20:51.390] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:20:51.613] DML res1: 0 [2025-09-24 11:20:52.115] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:20:52.115] Read Success [2025-09-24 11:20:52.115] Verifying certificate... [2025-09-24 11:20:52.370] Verified OK [2025-09-24 11:20:52.387] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:20:54.095] Verified OK [2025-09-24 11:20:54.095] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:20:54.671] Verified OK [2025-09-24 11:20:54.671] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:20:57.181] fs.protected_hardlinks = 1 [2025-09-24 11:20:57.181] fs.protected_symlinks = 1 [2025-09-24 11:20:57.197] kernel.modules_disabled = 1 [2025-09-24 11:20:57.405] [2025-09-24 11:20:57.405] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:20:58.667] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:21:06.450] SBL1:1210.0.1.0 [2025-09-24 11:21:06.482] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:21:08.065] SBL2:1210.0.1.0 [2025-09-24 11:21:08.097] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:21:08.209] j-A [2025-09-24 11:21:15.582] The R5 Autosar Classic is running [2025-09-24 11:21:15.582] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:21:15.582] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:21:16.206] INIT: version 2.96 booting [2025-09-24 11:21:16.318] INIT: Entering runlevel: 5 [2025-09-24 11:21:16.462] mtd24 attached [2025-09-24 11:21:16.477] mtd28 attached [2025-09-24 11:21:16.477] mtd32 attached [2025-09-24 11:21:16.542] ubi0:textures is mounted. [2025-09-24 11:21:16.542] RTNETLINK answers: File exists [2025-09-24 11:21:16.599] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:21:16.599] ubi1:animations is mounted. [2025-09-24 11:21:16.599] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:21:16.599] ubi2:dml_code is mounted. [2025-09-24 11:21:16.599] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:21:16.599] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:21:16.599] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:21:16.599] data.LB_FadeInType0=100 [2025-09-24 11:21:16.599] data.CHLH_FadeInType0=0 [2025-09-24 11:21:16.599] data.WU_FadeInDelay=0 [2025-09-24 11:21:16.599] max_time_out=0 [2025-09-24 11:21:16.599] No splash screen [2025-09-24 11:21:16.599] stop dss Done [2025-09-24 11:21:16.631] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:21:16.668] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:21:16.668] /dev/mem opened. [2025-09-24 11:21:16.668] Memory mapped at address 0xffffa8768000. [2025-09-24 11:21:16.668] Read at address 0x00600018 (0xffffa8768018): 0x00000000 [2025-09-24 11:21:16.668] Write at address 0x00600018 (0xffffa8768018): 0x00400040, readback 0x00400040 [2025-09-24 11:21:16.891] Loaded PowerVR consumer services. [2025-09-24 11:21:16.940] Waiting data available... [2025-09-24 11:21:16.956] 512+0 records in [2025-09-24 11:21:16.972] 512+0 records out [2025-09-24 11:21:16.988] Starting syslogd/klogd: done [2025-09-24 11:21:17.004] DML Start [2025-09-24 11:21:17.164] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:21:17.340] DML res1: 0 [2025-09-24 11:21:17.941] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:21:17.941] Read Success [2025-09-24 11:21:17.941] Verifying certificate... [2025-09-24 11:21:18.309] Verified OK [2025-09-24 11:21:18.341] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:21:19.901] Verified OK [2025-09-24 11:21:19.901] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:21:20.521] Verified OK [2025-09-24 11:21:20.521] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:21:23.031] fs.protected_hardlinks = 1 [2025-09-24 11:21:23.047] fs.protected_symlinks = 1 [2025-09-24 11:21:23.047] kernel.modules_disabled = 1 [2025-09-24 11:21:23.239] [2025-09-24 11:21:23.239] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:21:24.518] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:21:32.184] SBL1:1210.0.1.0 [2025-09-24 11:21:32.232] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:21:33.799] SBL2:1210.0.1.0 [2025-09-24 11:21:33.846] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:21:33.942] j-A [2025-09-24 11:21:41.298] The R5 Autosar Classic is running [2025-09-24 11:21:41.320] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:21:41.320] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:21:41.928] INIT: version 2.96 booting [2025-09-24 11:21:42.039] INIT: Entering runlevel: 5 [2025-09-24 11:21:42.199] mtd28 attached [2025-09-24 11:21:42.199] mtd24 attached [2025-09-24 11:21:42.216] mtd32 attached [2025-09-24 11:21:42.264] RTNETLINK answers: File exists [2025-09-24 11:21:42.322] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:21:42.322] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:21:42.322] ubi0:animations is mounted. [2025-09-24 11:21:42.322] ubi1:textures is mounted. [2025-09-24 11:21:42.322] ubi2:dml_code is mounted. [2025-09-24 11:21:42.322] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:21:42.322] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:21:42.322] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:21:42.322] data.LB_FadeInType0=100 [2025-09-24 11:21:42.322] data.CHLH_FadeInType0=0 [2025-09-24 11:21:42.322] data.WU_FadeInDelay=0 [2025-09-24 11:21:42.322] max_time_out=0 [2025-09-24 11:21:42.322] No splash screen [2025-09-24 11:21:42.322] stop dss Done [2025-09-24 11:21:42.354] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:21:42.401] /dev/mem opened. [2025-09-24 11:21:42.401] Memory mapped at address 0xffff86994000. [2025-09-24 11:21:42.401] Read at address 0x00600018 (0xffff86994018): 0x00000000 [2025-09-24 11:21:42.401] Write at address 0x00600018 (0xffff86994018): 0x00400040, readback 0x00400040 [2025-09-24 11:21:42.401] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:21:42.481] Loaded PowerVR consumer services. [2025-09-24 11:21:42.656] Waiting data available... [2025-09-24 11:21:42.673] 512+0 records in [2025-09-24 11:21:42.673] 512+0 records out [2025-09-24 11:21:42.721] Starting syslogd/klogd: done [2025-09-24 11:21:42.737] DML Start [2025-09-24 11:21:42.913] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:21:43.137] DML res1: 0 [2025-09-24 11:21:43.552] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:21:43.568] Read Success [2025-09-24 11:21:43.568] Verifying certificate... [2025-09-24 11:21:43.840] Verified OK [2025-09-24 11:21:43.857] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:21:45.496] Verified OK [2025-09-24 11:21:45.496] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:21:46.039] Verified OK [2025-09-24 11:21:46.039] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:21:48.774] fs.protected_hardlinks = 1 [2025-09-24 11:21:48.802] fs.protected_symlinks = 1 [2025-09-24 11:21:48.802] kernel.modules_disabled = 1 [2025-09-24 11:21:48.993] [2025-09-24 11:21:48.993] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:21:50.171] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:21:57.927] SBL1:1210.0.1.0 [2025-09-24 11:21:57.975] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:21:59.542] SBL2:1210.0.1.0 [2025-09-24 11:21:59.590] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:21:59.686] j-A [2025-09-24 11:22:07.042] The R5 Autosar Classic is running [2025-09-24 11:22:07.064] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:22:07.064] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:22:07.671] INIT: version 2.96 booting [2025-09-24 11:22:07.783] INIT: Entering runlevel: 5 [2025-09-24 11:22:07.943] mtd28 attached [2025-09-24 11:22:07.959] mtd32 attached [2025-09-24 11:22:07.959] mtd24 attached [2025-09-24 11:22:07.975] ubi0:animations is mounted. [2025-09-24 11:22:08.007] RTNETLINK answers: File exists [2025-09-24 11:22:08.045] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:22:08.045] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:22:08.045] ubi1:dml_code is mounted. [2025-09-24 11:22:08.045] ubi2:textures is mounted. [2025-09-24 11:22:08.045] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:22:08.045] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:22:08.045] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:22:08.068] data.LB_FadeInType0=100 [2025-09-24 11:22:08.068] data.CHLH_FadeInType0=0 [2025-09-24 11:22:08.068] data.WU_FadeInDelay=0 [2025-09-24 11:22:08.068] max_time_out=0 [2025-09-24 11:22:08.068] No splash screen [2025-09-24 11:22:08.068] stop dss Done [2025-09-24 11:22:08.116] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:22:08.116] /dev/mem opened. [2025-09-24 11:22:08.148] Memory mapped at address 0xffff91d71000. [2025-09-24 11:22:08.148] Read at address 0x00600018 (0xffff91d71018): 0x00000000 [2025-09-24 11:22:08.148] Write at address 0x00600018 (0xffff91d71018): 0x00400040, readback 0x00400040 [2025-09-24 11:22:08.148] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:22:08.387] Loaded PowerVR consumer services. [2025-09-24 11:22:08.419] Waiting data available... [2025-09-24 11:22:08.435] 512+0 records in [2025-09-24 11:22:08.435] 512+0 records out [2025-09-24 11:22:08.484] Starting syslogd/klogd: done [2025-09-24 11:22:08.500] DML Start [2025-09-24 11:22:08.676] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:22:08.867] DML res1: 0 [2025-09-24 11:22:09.347] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:22:09.363] Read Success [2025-09-24 11:22:09.363] Verifying certificate... [2025-09-24 11:22:09.603] Verified OK [2025-09-24 11:22:09.619] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:22:11.275] Verified OK [2025-09-24 11:22:11.275] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:22:11.940] Verified OK [2025-09-24 11:22:11.940] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:22:14.562] fs.protected_hardlinks = 1 [2025-09-24 11:22:14.562] fs.protected_symlinks = 1 [2025-09-24 11:22:14.578] kernel.modules_disabled = 1 [2025-09-24 11:22:14.770] [2025-09-24 11:22:14.770] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:22:15.895] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:22:23.658] SBL1:1210.0.1.0 [2025-09-24 11:22:23.706] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:22:25.272] SBL2:1210.0.1.0 [2025-09-24 11:22:25.320] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 11:22:25.417] j-A [2025-09-24 11:22:32.771] The R5 Autosar Classic is running [2025-09-24 11:22:32.793] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:22:32.793] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:22:33.400] INIT: version 2.96 booting [2025-09-24 11:22:33.513] INIT: Entering runlevel: 5 [2025-09-24 11:22:33.673] mtd28 attached [2025-09-24 11:22:33.673] mtd24 attached [2025-09-24 11:22:33.688] mtd32 attached [2025-09-24 11:22:33.736] RTNETLINK answers: File exists [2025-09-24 11:22:33.799] ubi0:animations is mounted. [2025-09-24 11:22:33.799] ubi1:textures is mounted. [2025-09-24 11:22:33.799] ubi2:dml_code is mounted. [2025-09-24 11:22:33.799] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:22:33.799] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:22:33.799] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:22:33.799] data.LB_FadeInType0=100 [2025-09-24 11:22:33.799] data.CHLH_FadeInType0=0 [2025-09-24 11:22:33.799] data.WU_FadeInDelay=0 [2025-09-24 11:22:33.799] max_time_out=0 [2025-09-24 11:22:33.799] No splash screen [2025-09-24 11:22:33.799] stop dss Done [2025-09-24 11:22:33.799] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:22:33.799] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:22:33.871] /dev/mem opened. [2025-09-24 11:22:33.871] Memory mapped at address 0xffff9705a000. [2025-09-24 11:22:33.871] Read at address 0x00600018 (0xffff9705a018): 0x00000000 [2025-09-24 11:22:33.871] Write at address 0x00600018 (0xffff9705a018): 0x00400040, readback 0x00400040 [2025-09-24 11:22:33.871] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:22:33.903] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:22:34.016] Loaded PowerVR consumer services. [2025-09-24 11:22:34.127] Waiting data available... [2025-09-24 11:22:34.143] 512+0 records in [2025-09-24 11:22:34.143] 512+0 records out [2025-09-24 11:22:34.175] Starting syslogd/klogd: done [2025-09-24 11:22:34.191] DML Start [2025-09-24 11:22:34.335] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:22:34.542] DML res1: 0 [2025-09-24 11:22:35.035] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:22:35.035] Read Success [2025-09-24 11:22:35.035] Verifying certificate... [2025-09-24 11:22:35.260] Verified OK [2025-09-24 11:22:35.275] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:22:36.889] Verified OK [2025-09-24 11:22:36.889] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:22:37.476] Verified OK [2025-09-24 11:22:37.476] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:22:40.258] fs.protected_hardlinks = 1 [2025-09-24 11:22:40.258] fs.protected_symlinks = 1 [2025-09-24 11:22:40.275] kernel.modules_disabled = 1 [2025-09-24 11:22:40.482] [2025-09-24 11:22:40.482] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:22:41.678] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:22:49.386] SBL1:1210.0.1.0 [2025-09-24 11:22:49.434] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:22:51.001] SBL2:1210.0.1.0 [2025-09-24 11:22:51.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:22:51.144] j-A [2025-09-24 11:22:58.499] The R5 Autosar Classic is running [2025-09-24 11:22:58.499] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:22:58.520] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:22:59.128] INIT: version 2.96 booting [2025-09-24 11:22:59.240] INIT: Entering runlevel: 5 [2025-09-24 11:22:59.399] mtd24 attached [2025-09-24 11:22:59.399] mtd28 attached [2025-09-24 11:22:59.415] mtd32 attached [2025-09-24 11:22:59.463] RTNETLINK answers: File exists [2025-09-24 11:22:59.463] ubi1:animations is mounted. [2025-09-24 11:22:59.526] ubi0:textures is mounted. [2025-09-24 11:22:59.526] ubi2:dml_code is mounted. [2025-09-24 11:22:59.526] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:22:59.526] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:22:59.526] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:22:59.526] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:22:59.526] data.LB_FadeInType0=100 [2025-09-24 11:22:59.526] data.CHLH_FadeInType0=0 [2025-09-24 11:22:59.526] data.WU_FadeInDelay=0 [2025-09-24 11:22:59.526] max_time_out=0 [2025-09-24 11:22:59.526] No splash screen [2025-09-24 11:22:59.526] stop dss Done [2025-09-24 11:22:59.526] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:22:59.574] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:22:59.574] /dev/mem opened. [2025-09-24 11:22:59.609] Memory mapped at address 0xffff7ffc3000. [2025-09-24 11:22:59.609] Read at address 0x00600018 (0xffff7ffc3018): 0x00000000 [2025-09-24 11:22:59.609] Write at address 0x00600018 (0xffff7ffc3018): 0x00400040, readback 0x00400040 [2025-09-24 11:22:59.609] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:22:59.689] Loaded PowerVR consumer services. [2025-09-24 11:22:59.849] Waiting data available... [2025-09-24 11:22:59.865] 512+0 records in [2025-09-24 11:22:59.865] 512+0 records out [2025-09-24 11:22:59.913] Starting syslogd/klogd: done [2025-09-24 11:22:59.945] DML Start [2025-09-24 11:23:00.137] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:23:00.345] DML res1: 0 [2025-09-24 11:23:00.784] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:23:00.784] Read Success [2025-09-24 11:23:00.784] Verifying certificate... [2025-09-24 11:23:01.055] Verified OK [2025-09-24 11:23:01.071] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:23:02.734] Verified OK [2025-09-24 11:23:02.750] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:23:03.342] Verified OK [2025-09-24 11:23:03.358] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:23:05.948] fs.protected_hardlinks = 1 [2025-09-24 11:23:05.964] fs.protected_symlinks = 1 [2025-09-24 11:23:05.964] kernel.modules_disabled = 1 [2025-09-24 11:23:06.172] [2025-09-24 11:23:06.172] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:23:07.435] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:23:15.121] SBL1:1210.0.1.0 [2025-09-24 11:23:15.154] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:23:16.737] SBL2:1210.0.1.0 [2025-09-24 11:23:16.768] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 11:23:16.880] j-A [2025-09-24 11:23:24.252] The R5 Autosar Classic is running [2025-09-24 11:23:24.252] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:23:24.252] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:23:24.859] INIT: version 2.96 booting [2025-09-24 11:23:24.971] INIT: Entering runlevel: 5 [2025-09-24 11:23:25.131] mtd28 attached [2025-09-24 11:23:25.147] mtd24 attached [2025-09-24 11:23:25.147] mtd32 attached [2025-09-24 11:23:25.195] ubi0:animations is mounted. [2025-09-24 11:23:25.263] RTNETLINK answers: File exists [2025-09-24 11:23:25.263] ubi1:textures is mounted. [2025-09-24 11:23:25.263] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:23:25.263] ubi2:dml_code is mounted. [2025-09-24 11:23:25.263] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:23:25.263] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:23:25.263] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:23:25.263] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:23:25.263] data.LB_FadeInType0=100 [2025-09-24 11:23:25.263] data.CHLH_FadeInType0=0 [2025-09-24 11:23:25.263] data.WU_FadeInDelay=0 [2025-09-24 11:23:25.263] max_time_out=0 [2025-09-24 11:23:25.263] No splash screen [2025-09-24 11:23:25.263] stop dss Done [2025-09-24 11:23:25.296] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:23:25.344] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:23:25.344] /dev/mem opened. [2025-09-24 11:23:25.344] Memory mapped at address 0xffff93ef8000. [2025-09-24 11:23:25.344] Read at address 0x00600018 (0xffff93ef8018): 0x00000000 [2025-09-24 11:23:25.344] Write at address 0x00600018 (0xffff93ef8018): 0x00400040, readback 0x00400040 [2025-09-24 11:23:25.503] Loaded PowerVR consumer services. [2025-09-24 11:23:25.599] Waiting data available... [2025-09-24 11:23:25.615] 512+0 records in [2025-09-24 11:23:25.615] 512+0 records out [2025-09-24 11:23:25.631] Starting syslogd/klogd: done [2025-09-24 11:23:25.663] DML Start [2025-09-24 11:23:25.806] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:23:26.015] DML res1: 0 [2025-09-24 11:23:26.555] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:23:26.555] Read Success [2025-09-24 11:23:26.555] Verifying certificate... [2025-09-24 11:23:26.810] Verified OK [2025-09-24 11:23:26.826] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:23:28.458] Verified OK [2025-09-24 11:23:28.458] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:23:29.121] Verified OK [2025-09-24 11:23:29.121] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:23:31.743] fs.protected_hardlinks = 1 [2025-09-24 11:23:31.743] fs.protected_symlinks = 1 [2025-09-24 11:23:31.759] kernel.modules_disabled = 1 [2025-09-24 11:23:31.967] [2025-09-24 11:23:31.967] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:23:33.176] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:23:40.848] SBL1:1210.0.1.0 [2025-09-24 11:23:40.896] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:23:42.463] SBL2:1210.0.1.0 [2025-09-24 11:23:42.511] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:23:42.607] j-A [2025-09-24 11:23:49.962] The R5 Autosar Classic is running [2025-09-24 11:23:49.987] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:23:49.987] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:23:50.594] INIT: version 2.96 booting [2025-09-24 11:23:50.706] INIT: Entering runlevel: 5 [2025-09-24 11:23:50.865] mtd24 attached [2025-09-24 11:23:50.882] mtd28 attached [2025-09-24 11:23:50.882] mtd32 attached [2025-09-24 11:23:50.930] ubi0:textures is mounted. [2025-09-24 11:23:50.930] ubi1:animations is mounted. [2025-09-24 11:23:50.994] RTNETLINK answers: File exists [2025-09-24 11:23:50.994] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:23:50.994] ubi2:dml_code is mounted. [2025-09-24 11:23:50.994] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:23:50.994] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:23:50.994] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:23:50.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:23:50.994] data.LB_FadeInType0=100 [2025-09-24 11:23:50.994] data.CHLH_FadeInType0=0 [2025-09-24 11:23:50.994] data.WU_FadeInDelay=0 [2025-09-24 11:23:50.994] max_time_out=0 [2025-09-24 11:23:50.994] No splash screen [2025-09-24 11:23:50.994] stop dss Done [2025-09-24 11:23:51.041] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:23:51.074] /dev/mem opened. [2025-09-24 11:23:51.074] Memory mapped at address 0xffff9cbf6000. [2025-09-24 11:23:51.074] Read at address 0x00600018 (0xffff9cbf6018): 0x00000000 [2025-09-24 11:23:51.074] Write at address 0x00600018 (0xffff9cbf6018): 0x00400040, readback 0x00400040 [2025-09-24 11:23:51.074] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:23:51.186] Loaded PowerVR consumer services. [2025-09-24 11:23:51.330] Waiting data available... [2025-09-24 11:23:51.346] 512+0 records in [2025-09-24 11:23:51.346] 512+0 records out [2025-09-24 11:23:51.394] Starting syslogd/klogd: done [2025-09-24 11:23:51.410] DML Start [2025-09-24 11:23:51.570] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:23:51.825] DML res1: 0 [2025-09-24 11:23:52.235] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:23:52.235] Read Success [2025-09-24 11:23:52.235] Verifying certificate... [2025-09-24 11:23:52.475] Verified OK [2025-09-24 11:23:52.490] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:23:54.135] Verified OK [2025-09-24 11:23:54.135] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:23:54.774] Verified OK [2025-09-24 11:23:54.774] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:23:57.492] fs.protected_hardlinks = 1 [2025-09-24 11:23:57.492] fs.protected_symlinks = 1 [2025-09-24 11:23:57.508] kernel.modules_disabled = 1 [2025-09-24 11:23:57.700] [2025-09-24 11:23:57.700] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:23:58.850] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:24:06.598] SBL1:1210.0.1.0 [2025-09-24 11:24:06.646] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:24:08.213] SBL2:1210.0.1.0 [2025-09-24 11:24:08.261] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:24:08.373] j-A [2025-09-24 11:24:15.712] The R5 Autosar Classic is running [2025-09-24 11:24:15.737] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:24:15.737] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:24:16.345] INIT: version 2.96 booting [2025-09-24 11:24:16.472] INIT: Entering runlevel: 5 [2025-09-24 11:24:16.617] mtd24 attached [2025-09-24 11:24:16.632] mtd28 attached [2025-09-24 11:24:16.632] mtd32 attached [2025-09-24 11:24:16.680] ubi0:textures is mounted. [2025-09-24 11:24:16.749] RTNETLINK answers: File exists [2025-09-24 11:24:16.749] ubi1:animations is mounted. [2025-09-24 11:24:16.749] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:24:16.749] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:24:16.749] ubi2:dml_code is mounted. [2025-09-24 11:24:16.749] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:24:16.749] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:24:16.749] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:24:16.749] data.LB_FadeInType0=100 [2025-09-24 11:24:16.749] data.CHLH_FadeInType0=0 [2025-09-24 11:24:16.749] data.WU_FadeInDelay=0 [2025-09-24 11:24:16.749] max_time_out=0 [2025-09-24 11:24:16.749] No splash screen [2025-09-24 11:24:16.749] stop dss Done [2025-09-24 11:24:16.781] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:24:16.797] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:24:16.833] /dev/mem opened. [2025-09-24 11:24:16.833] Memory mapped at address 0xffffbca4b000. [2025-09-24 11:24:16.833] Read at address 0x00600018 (0xffffbca4b018): 0x00000000 [2025-09-24 11:24:16.833] Write at address 0x00600018 (0xffffbca4b018): 0x00400040, readback 0x00400040 [2025-09-24 11:24:16.913] Loaded PowerVR consumer services. [2025-09-24 11:24:17.073] Waiting data available... [2025-09-24 11:24:17.073] 512+0 records in [2025-09-24 11:24:17.073] 512+0 records out [2025-09-24 11:24:17.105] Starting syslogd/klogd: done [2025-09-24 11:24:17.121] DML Start [2025-09-24 11:24:17.313] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:24:17.537] DML res1: 0 [2025-09-24 11:24:17.889] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:24:17.910] Read Success [2025-09-24 11:24:17.910] Verifying certificate... [2025-09-24 11:24:18.117] Verified OK [2025-09-24 11:24:18.133] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:24:19.708] Verified OK [2025-09-24 11:24:19.708] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:24:20.316] Verified OK [2025-09-24 11:24:20.316] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:24:23.066] fs.protected_hardlinks = 1 [2025-09-24 11:24:23.066] fs.protected_symlinks = 1 [2025-09-24 11:24:23.082] kernel.modules_disabled = 1 [2025-09-24 11:24:23.258] [2025-09-24 11:24:23.258] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:24:24.567] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:24:32.341] SBL1:1210.0.1.0 [2025-09-24 11:24:32.389] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:24:33.956] SBL2:1210.0.1.0 [2025-09-24 11:24:34.004] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:24:34.100] j-A [2025-09-24 11:24:41.455] The R5 Autosar Classic is running [2025-09-24 11:24:41.478] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:24:41.478] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:24:42.085] INIT: version 2.96 booting [2025-09-24 11:24:42.198] INIT: Entering runlevel: 5 [2025-09-24 11:24:42.357] mtd24 attached [2025-09-24 11:24:42.373] mtd28 attached [2025-09-24 11:24:42.389] ubi0:textures is mounted. [2025-09-24 11:24:42.405] mtd32 attached [2025-09-24 11:24:42.421] ubi1:animations is mounted. [2025-09-24 11:24:42.421] RTNETLINK answers: File exists [2025-09-24 11:24:42.437] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:24:42.437] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:24:42.466] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:24:42.466] ubi2:dml_code is mounted. [2025-09-24 11:24:42.466] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:24:42.466] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:24:42.466] data.LB_FadeInType0=100 [2025-09-24 11:24:42.487] data.CHLH_FadeInType0=0 [2025-09-24 11:24:42.487] data.WU_FadeInDelay=0 [2025-09-24 11:24:42.487] max_time_out=0 [2025-09-24 11:24:42.487] No splash screen [2025-09-24 11:24:42.487] stop dss Done [2025-09-24 11:24:42.503] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:24:42.519] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:24:42.575] /dev/mem opened. [2025-09-24 11:24:42.575] Memory mapped at address 0xffffa9729000. [2025-09-24 11:24:42.575] Read at address 0x00600018 (0xffffa9729018): 0x00000000 [2025-09-24 11:24:42.575] Write at address 0x00600018 (0xffffa9729018): 0x00400040, readback 0x00400040 [2025-09-24 11:24:42.655] Loaded PowerVR consumer services. [2025-09-24 11:24:42.815] Waiting data available... [2025-09-24 11:24:42.831] 512+0 records in [2025-09-24 11:24:42.831] 512+0 records out [2025-09-24 11:24:42.879] Starting syslogd/klogd: done [2025-09-24 11:24:42.895] DML Start [2025-09-24 11:24:43.055] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:24:43.279] DML res1: 0 [2025-09-24 11:24:43.749] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:24:43.749] Read Success [2025-09-24 11:24:43.749] Verifying certificate... [2025-09-24 11:24:43.958] Verified OK [2025-09-24 11:24:43.974] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:24:45.572] Verified OK [2025-09-24 11:24:45.593] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:24:46.225] Verified OK [2025-09-24 11:24:46.225] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:24:48.911] fs.protected_hardlinks = 1 [2025-09-24 11:24:48.911] fs.protected_symlinks = 1 [2025-09-24 11:24:48.927] kernel.modules_disabled = 1 [2025-09-24 11:24:49.119] [2025-09-24 11:24:49.119] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:24:50.356] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:24:58.081] SBL1:1210.0.1.0 [2025-09-24 11:24:58.129] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:24:59.696] SBL2:1210.0.1.0 [2025-09-24 11:24:59.743] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:24:59.856] j-A [2025-09-24 11:25:07.196] The R5 Autosar Classic is running [2025-09-24 11:25:07.220] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:25:07.220] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:25:07.828] INIT: version 2.96 booting [2025-09-24 11:25:07.941] INIT: Entering runlevel: 5 [2025-09-24 11:25:08.100] mtd24 attached [2025-09-24 11:25:08.116] mtd32 attached [2025-09-24 11:25:08.116] mtd28 attached [2025-09-24 11:25:08.148] ubi0:textures is mounted. [2025-09-24 11:25:08.180] RTNETLINK answers: File exists [2025-09-24 11:25:08.180] ubi1:dml_code is mounted. [2025-09-24 11:25:08.235] ubi2:animations is mounted. [2025-09-24 11:25:08.235] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:25:08.235] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:25:08.235] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:25:08.235] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:25:08.235] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:25:08.235] data.LB_FadeInType0=100 [2025-09-24 11:25:08.235] data.CHLH_FadeInType0=0 [2025-09-24 11:25:08.235] data.WU_FadeInDelay=0 [2025-09-24 11:25:08.235] max_time_out=0 [2025-09-24 11:25:08.235] No splash screen [2025-09-24 11:25:08.235] stop dss Done [2025-09-24 11:25:08.313] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:25:08.313] /dev/mem opened. [2025-09-24 11:25:08.313] Memory mapped at address 0xffff8b21a000. [2025-09-24 11:25:08.313] Read at address 0x00600018 (0xffff8b21a018): 0x00000000 [2025-09-24 11:25:08.313] Write at address 0x00600018 (0xffff8b21a018): 0x00400040, readback 0x00400040 [2025-09-24 11:25:08.313] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:25:08.473] Loaded PowerVR consumer services. [2025-09-24 11:25:08.585] Waiting data available... [2025-09-24 11:25:08.601] 512+0 records in [2025-09-24 11:25:08.601] 512+0 records out [2025-09-24 11:25:08.617] Starting syslogd/klogd: done [2025-09-24 11:25:08.649] DML Start [2025-09-24 11:25:08.792] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:25:09.032] DML res1: 0 [2025-09-24 11:25:09.504] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:25:09.504] Read Success [2025-09-24 11:25:09.504] Verifying certificate... [2025-09-24 11:25:09.744] Verified OK [2025-09-24 11:25:09.760] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:25:11.478] Verified OK [2025-09-24 11:25:11.478] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:25:12.097] Verified OK [2025-09-24 11:25:12.097] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:25:14.720] fs.protected_hardlinks = 1 [2025-09-24 11:25:14.720] fs.protected_symlinks = 1 [2025-09-24 11:25:14.736] kernel.modules_disabled = 1 [2025-09-24 11:25:14.911] [2025-09-24 11:25:14.911] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:25:16.058] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:25:23.827] SBL1:1210.0.1.0 [2025-09-24 11:25:23.859] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:25:25.442] SBL2:1210.0.1.0 [2025-09-24 11:25:25.474] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:25:25.586] j-A [2025-09-24 11:25:32.957] The R5 Autosar Classic is running [2025-09-24 11:25:32.957] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:25:32.957] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:25:33.565] INIT: version 2.96 booting [2025-09-24 11:25:33.676] INIT: Entering runlevel: 5 [2025-09-24 11:25:33.837] mtd24 attached [2025-09-24 11:25:33.837] mtd28 attached [2025-09-24 11:25:33.853] mtd32 attached [2025-09-24 11:25:33.901] ubi0:textures is mounted. [2025-09-24 11:25:33.937] RTNETLINK answers: File exists [2025-09-24 11:25:33.937] ubi1:animations is mounted. [2025-09-24 11:25:33.937] ubi2:dml_code is mounted. [2025-09-24 11:25:33.937] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:25:33.937] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:25:33.937] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:25:33.975] data.LB_FadeInType0=100 [2025-09-24 11:25:33.975] data.CHLH_FadeInType0=0 [2025-09-24 11:25:33.975] data.WU_FadeInDelay=0 [2025-09-24 11:25:33.975] max_time_out=0 [2025-09-24 11:25:33.975] No splash screen [2025-09-24 11:25:33.975] stop dss Done [2025-09-24 11:25:33.975] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:25:33.975] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:25:34.046] /dev/mem opened. [2025-09-24 11:25:34.046] Memory mapped at address 0xffffb0c2f000. [2025-09-24 11:25:34.046] Read at address 0x00600018 (0xffffb0c2f018): 0x00000000 [2025-09-24 11:25:34.046] Write at address 0x00600018 (0xffffb0c2f018): 0x00400040, readback 0x00400040 [2025-09-24 11:25:34.046] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:25:34.046] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:25:34.207] Loaded PowerVR consumer services. [2025-09-24 11:25:34.302] Waiting data available... [2025-09-24 11:25:34.318] 512+0 records in [2025-09-24 11:25:34.318] 512+0 records out [2025-09-24 11:25:34.334] Starting syslogd/klogd: done [2025-09-24 11:25:34.366] DML Start [2025-09-24 11:25:34.526] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:25:34.734] DML res1: 0 [2025-09-24 11:25:35.222] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:25:35.222] Read Success [2025-09-24 11:25:35.222] Verifying certificate... [2025-09-24 11:25:35.494] Verified OK [2025-09-24 11:25:35.509] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:25:37.205] Verified OK [2025-09-24 11:25:37.205] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:25:37.780] Verified OK [2025-09-24 11:25:37.780] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:25:40.435] fs.protected_hardlinks = 1 [2025-09-24 11:25:40.451] fs.protected_symlinks = 1 [2025-09-24 11:25:40.451] kernel.modules_disabled = 1 [2025-09-24 11:25:40.658] [2025-09-24 11:25:40.658] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:25:41.853] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:25:49.574] SBL1:1210.0.1.0 [2025-09-24 11:25:49.606] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:25:51.189] SBL2:1210.0.1.0 [2025-09-24 11:25:51.221] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:25:51.333] j-A [2025-09-24 11:25:58.708] The R5 Autosar Classic is running [2025-09-24 11:25:58.708] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:25:58.708] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:25:59.316] INIT: version 2.96 booting [2025-09-24 11:25:59.428] INIT: Entering runlevel: 5 [2025-09-24 11:25:59.572] mtd24 attached [2025-09-24 11:25:59.588] mtd28 attached [2025-09-24 11:25:59.604] mtd32 attached [2025-09-24 11:25:59.706] ubi1:animations is mounted. [2025-09-24 11:25:59.706] RTNETLINK answers: File exists [2025-09-24 11:25:59.706] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:25:59.706] ubi0:textures is mounted. [2025-09-24 11:25:59.706] ubi2:dml_code is mounted. [2025-09-24 11:25:59.706] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:25:59.706] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:25:59.706] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:25:59.706] data.LB_FadeInType0=100 [2025-09-24 11:25:59.706] data.CHLH_FadeInType0=0 [2025-09-24 11:25:59.706] data.WU_FadeInDelay=0 [2025-09-24 11:25:59.706] max_time_out=0 [2025-09-24 11:25:59.706] No splash screen [2025-09-24 11:25:59.706] stop dss Done [2025-09-24 11:25:59.706] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:25:59.769] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:25:59.769] /dev/mem opened. [2025-09-24 11:25:59.769] Memory mapped at address 0xffffbb216000. [2025-09-24 11:25:59.769] Read at address 0x00600018 (0xffffbb216018): 0x00000000 [2025-09-24 11:25:59.769] Write at address 0x00600018 (0xffffbb216018): 0x00400040, readback 0x00400040 [2025-09-24 11:25:59.769] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:25:59.913] Loaded PowerVR consumer services. [2025-09-24 11:26:00.040] Waiting data available... [2025-09-24 11:26:00.056] 512+0 records in [2025-09-24 11:26:00.056] 512+0 records out [2025-09-24 11:26:00.088] Starting syslogd/klogd: done [2025-09-24 11:26:00.121] DML Start [2025-09-24 11:26:00.264] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:26:00.488] DML res1: 0 [2025-09-24 11:26:01.040] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:26:01.040] Read Success [2025-09-24 11:26:01.040] Verifying certificate... [2025-09-24 11:26:01.311] Verified OK [2025-09-24 11:26:01.327] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:26:02.904] Verified OK [2025-09-24 11:26:02.904] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:26:03.495] Verified OK [2025-09-24 11:26:03.511] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:26:06.181] fs.protected_hardlinks = 1 [2025-09-24 11:26:06.181] fs.protected_symlinks = 1 [2025-09-24 11:26:06.197] kernel.modules_disabled = 1 [2025-09-24 11:26:06.389] [2025-09-24 11:26:06.389] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:26:07.544] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:26:15.315] SBL1:1210.0.1.0 [2025-09-24 11:26:15.363] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:26:16.929] SBL2:1210.0.1.0 [2025-09-24 11:26:16.977] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:26:17.074] j-A [2025-09-24 11:26:24.429] The R5 Autosar Classic is running [2025-09-24 11:26:24.453] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:26:24.453] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:26:25.061] INIT: version 2.96 booting [2025-09-24 11:26:25.188] INIT: Entering runlevel: 5 [2025-09-24 11:26:25.332] mtd32 attached [2025-09-24 11:26:25.348] mtd28 attached [2025-09-24 11:26:25.348] mtd24 attached [2025-09-24 11:26:25.466] RTNETLINK answers: File exists [2025-09-24 11:26:25.466] ubi0:dml_code is mounted. [2025-09-24 11:26:25.466] ubi2:textures is mounted. [2025-09-24 11:26:25.466] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:26:25.466] ubi1:animations is mounted. [2025-09-24 11:26:25.466] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:26:25.466] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:26:25.466] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:26:25.466] data.LB_FadeInType0=100 [2025-09-24 11:26:25.466] data.CHLH_FadeInType0=0 [2025-09-24 11:26:25.466] data.WU_FadeInDelay=0 [2025-09-24 11:26:25.466] max_time_out=0 [2025-09-24 11:26:25.466] No splash screen [2025-09-24 11:26:25.466] stop dss Done [2025-09-24 11:26:25.466] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:26:25.536] /dev/mem opened. [2025-09-24 11:26:25.536] Memory mapped at address 0xffff84a15000. [2025-09-24 11:26:25.536] Read at address 0x00600018 (0xffff84a15018): 0x00000000 [2025-09-24 11:26:25.536] Write at address 0x00600018 (0xffff84a15018): 0x00400040, readback 0x00400040 [2025-09-24 11:26:25.584] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:26:25.600] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:26:25.664] Loaded PowerVR consumer services. [2025-09-24 11:26:25.808] Waiting data available... [2025-09-24 11:26:25.824] 512+0 records in [2025-09-24 11:26:25.824] 512+0 records out [2025-09-24 11:26:25.872] Starting syslogd/klogd: done [2025-09-24 11:26:25.888] DML Start [2025-09-24 11:26:26.048] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:26:26.272] DML res1: 0 [2025-09-24 11:26:26.752] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:26:26.773] Read Success [2025-09-24 11:26:26.773] Verifying certificate... [2025-09-24 11:26:27.028] Verified OK [2025-09-24 11:26:27.060] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:26:28.804] Verified OK [2025-09-24 11:26:28.804] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:26:29.363] Verified OK [2025-09-24 11:26:29.363] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:26:31.921] fs.protected_hardlinks = 1 [2025-09-24 11:26:31.921] fs.protected_symlinks = 1 [2025-09-24 11:26:31.921] kernel.modules_disabled = 1 [2025-09-24 11:26:32.097] [2025-09-24 11:26:32.097] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:26:33.309] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:26:41.067] SBL1:1210.0.1.0 [2025-09-24 11:26:41.115] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:26:42.682] SBL2:1210.0.1.0 [2025-09-24 11:26:42.730] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:26:42.826] j-A [2025-09-24 11:26:50.181] The R5 Autosar Classic is running [2025-09-24 11:26:50.181] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:26:50.202] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:26:50.810] INIT: version 2.96 booting [2025-09-24 11:26:50.922] INIT: Entering runlevel: 5 [2025-09-24 11:26:51.082] mtd24 attached [2025-09-24 11:26:51.082] mtd28 attached [2025-09-24 11:26:51.098] mtd32 attached [2025-09-24 11:26:51.146] ubi0:textures is mounted. [2025-09-24 11:26:51.191] ubi1:animations is mounted. [2025-09-24 11:26:51.191] RTNETLINK answers: File exists [2025-09-24 11:26:51.191] ubi2:dml_code is mounted. [2025-09-24 11:26:51.191] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:26:51.191] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:26:51.191] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:26:51.191] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:26:51.191] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:26:51.217] data.LB_FadeInType0=100 [2025-09-24 11:26:51.217] data.CHLH_FadeInType0=0 [2025-09-24 11:26:51.217] data.WU_FadeInDelay=0 [2025-09-24 11:26:51.217] max_time_out=0 [2025-09-24 11:26:51.217] No splash screen [2025-09-24 11:26:51.217] stop dss Done [2025-09-24 11:26:51.265] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:26:51.265] /dev/mem opened. [2025-09-24 11:26:51.296] Memory mapped at address 0xffffa6929000. [2025-09-24 11:26:51.296] Read at address 0x00600018 (0xffffa6929018): 0x00000000 [2025-09-24 11:26:51.296] Write at address 0x00600018 (0xffffa6929018): 0x00400040, readback 0x00400040 [2025-09-24 11:26:51.296] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:26:51.377] Loaded PowerVR consumer services. [2025-09-24 11:26:51.536] Waiting data available... [2025-09-24 11:26:51.552] 512+0 records in [2025-09-24 11:26:51.552] 512+0 records out [2025-09-24 11:26:51.584] Starting syslogd/klogd: done [2025-09-24 11:26:51.600] DML Start [2025-09-24 11:26:51.792] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:26:52.033] DML res1: 0 [2025-09-24 11:26:52.399] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:26:52.399] Read Success [2025-09-24 11:26:52.399] Verifying certificate... [2025-09-24 11:26:52.655] Verified OK [2025-09-24 11:26:52.671] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:26:54.376] Verified OK [2025-09-24 11:26:54.376] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:26:54.983] Verified OK [2025-09-24 11:26:54.983] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:26:57.589] fs.protected_hardlinks = 1 [2025-09-24 11:26:57.589] fs.protected_symlinks = 1 [2025-09-24 11:26:57.605] kernel.modules_disabled = 1 [2025-09-24 11:26:57.798] [2025-09-24 11:26:57.798] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:26:59.077] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:27:06.791] SBL1:1210.0.1.0 [2025-09-24 11:27:06.839] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:27:08.406] SBL2:1210.0.1.0 [2025-09-24 11:27:08.453] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:27:08.550] j-A [2025-09-24 11:27:15.905] The R5 Autosar Classic is running [2025-09-24 11:27:15.929] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:27:15.929] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:27:16.537] INIT: version 2.96 booting [2025-09-24 11:27:16.648] INIT: Entering runlevel: 5 [2025-09-24 11:27:16.809] mtd28 attached [2025-09-24 11:27:16.825] mtd24 attached [2025-09-24 11:27:16.825] mtd32 attached [2025-09-24 11:27:16.841] ubi0:animations is mounted. [2025-09-24 11:27:16.872] RTNETLINK answers: File exists [2025-09-24 11:27:16.910] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:27:16.910] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:27:16.910] ubi1:dml_code is mounted. [2025-09-24 11:27:16.910] ubi2:textures is mounted. [2025-09-24 11:27:16.910] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:27:16.910] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:27:16.910] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:27:16.936] data.LB_FadeInType0=100 [2025-09-24 11:27:16.936] data.CHLH_FadeInType0=0 [2025-09-24 11:27:16.936] data.WU_FadeInDelay=0 [2025-09-24 11:27:16.936] max_time_out=0 [2025-09-24 11:27:16.936] No splash screen [2025-09-24 11:27:16.936] stop dss Done [2025-09-24 11:27:16.968] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:27:16.984] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:27:17.017] /dev/mem opened. [2025-09-24 11:27:17.017] Memory mapped at address 0xffff8e6e1000. [2025-09-24 11:27:17.017] Read at address 0x00600018 (0xffff8e6e1018): 0x00000000 [2025-09-24 11:27:17.017] Write at address 0x00600018 (0xffff8e6e1018): 0x00400040, readback 0x00400040 [2025-09-24 11:27:17.241] Loaded PowerVR consumer services. [2025-09-24 11:27:17.289] Waiting data available... [2025-09-24 11:27:17.289] 512+0 records in [2025-09-24 11:27:17.289] 512+0 records out [2025-09-24 11:27:17.321] Starting syslogd/klogd: done [2025-09-24 11:27:17.337] DML Start [2025-09-24 11:27:17.545] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:27:17.769] DML res1: 0 [2025-09-24 11:27:18.200] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:27:18.200] Read Success [2025-09-24 11:27:18.200] Verifying certificate... [2025-09-24 11:27:18.455] Verified OK [2025-09-24 11:27:18.471] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:27:20.034] Verified OK [2025-09-24 11:27:20.034] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:27:20.638] Verified OK [2025-09-24 11:27:20.638] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:27:23.293] fs.protected_hardlinks = 1 [2025-09-24 11:27:23.309] fs.protected_symlinks = 1 [2025-09-24 11:27:23.309] kernel.modules_disabled = 1 [2025-09-24 11:27:23.516] [2025-09-24 11:27:23.516] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:27:24.852] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:27:32.528] SBL1:1210.0.1.0 [2025-09-24 11:27:32.576] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:27:34.142] SBL2:1210.0.1.0 [2025-09-24 11:27:34.191] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:27:34.287] j-A [2025-09-24 11:27:41.642] The R5 Autosar Classic is running [2025-09-24 11:27:41.667] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:27:41.667] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:27:42.274] INIT: version 2.96 booting [2025-09-24 11:27:42.386] INIT: Entering runlevel: 5 [2025-09-24 11:27:42.530] mtd24 attached [2025-09-24 11:27:42.546] mtd28 attached [2025-09-24 11:27:42.562] mtd32 attached [2025-09-24 11:27:42.610] ubi0:textures is mounted. [2025-09-24 11:27:42.610] RTNETLINK answers: File exists [2025-09-24 11:27:42.671] ubi1:animations is mounted. [2025-09-24 11:27:42.671] ubi2:dml_code is mounted. [2025-09-24 11:27:42.671] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:27:42.671] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:27:42.671] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:27:42.671] data.LB_FadeInType0=100 [2025-09-24 11:27:42.671] data.CHLH_FadeInType0=0 [2025-09-24 11:27:42.671] data.WU_FadeInDelay=0 [2025-09-24 11:27:42.671] max_time_out=0 [2025-09-24 11:27:42.671] No splash screen [2025-09-24 11:27:42.671] stop dss Done [2025-09-24 11:27:42.671] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:27:42.671] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:27:42.735] /dev/mem opened. [2025-09-24 11:27:42.735] Memory mapped at address 0xffff98107000. [2025-09-24 11:27:42.735] Read at address 0x00600018 (0xffff98107018): 0x00000000 [2025-09-24 11:27:42.735] Write at address 0x00600018 (0xffff98107018): 0x00400040, readback 0x00400040 [2025-09-24 11:27:42.767] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:27:42.783] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:27:42.895] Loaded PowerVR consumer services. [2025-09-24 11:27:43.006] Waiting data available... [2025-09-24 11:27:43.022] 512+0 records in [2025-09-24 11:27:43.038] 512+0 records out [2025-09-24 11:27:43.055] Starting syslogd/klogd: done [2025-09-24 11:27:43.071] DML Start [2025-09-24 11:27:43.230] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:27:43.455] DML res1: 0 [2025-09-24 11:27:43.930] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:27:43.930] Read Success [2025-09-24 11:27:43.930] Verifying certificate... [2025-09-24 11:27:44.154] Verified OK [2025-09-24 11:27:44.154] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:27:45.828] Verified OK [2025-09-24 11:27:45.828] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:27:46.494] Verified OK [2025-09-24 11:27:46.494] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:27:49.132] fs.protected_hardlinks = 1 [2025-09-24 11:27:49.148] fs.protected_symlinks = 1 [2025-09-24 11:27:49.148] kernel.modules_disabled = 1 [2025-09-24 11:27:49.356] [2025-09-24 11:27:49.356] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:27:50.568] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:27:58.290] SBL1:1210.0.1.0 [2025-09-24 11:27:58.322] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:27:59.904] SBL2:1210.0.1.0 [2025-09-24 11:27:59.936] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:28:00.048] j-A [2025-09-24 11:28:07.421] The R5 Autosar Classic is running [2025-09-24 11:28:07.421] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:28:07.421] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:28:08.029] INIT: version 2.96 booting [2025-09-24 11:28:08.141] INIT: Entering runlevel: 5 [2025-09-24 11:28:08.301] mtd28 attached [2025-09-24 11:28:08.301] mtd32 attached [2025-09-24 11:28:08.317] mtd24 attached [2025-09-24 11:28:08.365] ubi0:animations is mounted. [2025-09-24 11:28:08.430] RTNETLINK answers: File exists [2025-09-24 11:28:08.430] ubi1:dml_code is mounted. [2025-09-24 11:28:08.430] ubi2:textures is mounted. [2025-09-24 11:28:08.430] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:28:08.430] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:28:08.430] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:28:08.430] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:28:08.430] data.LB_FadeInType0=100 [2025-09-24 11:28:08.430] data.CHLH_FadeInType0=0 [2025-09-24 11:28:08.430] data.WU_FadeInDelay=0 [2025-09-24 11:28:08.430] max_time_out=0 [2025-09-24 11:28:08.430] No splash screen [2025-09-24 11:28:08.430] stop dss Done [2025-09-24 11:28:08.430] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:28:08.462] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:28:08.478] /dev/mem opened. [2025-09-24 11:28:08.510] Memory mapped at address 0xffff802ed000. [2025-09-24 11:28:08.510] Read at address 0x00600018 (0xffff802ed018): 0x00000000 [2025-09-24 11:28:08.510] Write at address 0x00600018 (0xffff802ed018): 0x00400040, readback 0x00400040 [2025-09-24 11:28:08.510] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:28:08.637] Loaded PowerVR consumer services. [2025-09-24 11:28:08.766] Waiting data available... [2025-09-24 11:28:08.782] 512+0 records in [2025-09-24 11:28:08.782] 512+0 records out [2025-09-24 11:28:08.830] Starting syslogd/klogd: done [2025-09-24 11:28:08.846] DML Start [2025-09-24 11:28:09.006] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:28:09.213] DML res1: 0 [2025-09-24 11:28:09.699] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:28:09.699] Read Success [2025-09-24 11:28:09.699] Verifying certificate... [2025-09-24 11:28:09.939] Verified OK [2025-09-24 11:28:09.955] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:28:11.643] Verified OK [2025-09-24 11:28:11.643] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:28:12.277] Verified OK [2025-09-24 11:28:12.277] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:28:14.818] fs.protected_hardlinks = 1 [2025-09-24 11:28:14.834] fs.protected_symlinks = 1 [2025-09-24 11:28:14.834] kernel.modules_disabled = 1 [2025-09-24 11:28:15.043] [2025-09-24 11:28:15.043] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:28:16.320] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:28:24.018] SBL1:1210.0.1.0 [2025-09-24 11:28:24.066] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:28:25.633] SBL2:1210.0.1.0 [2025-09-24 11:28:25.681] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:28:25.793] j-A [2025-09-24 11:28:33.131] The R5 Autosar Classic is running [2025-09-24 11:28:33.162] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:28:33.162] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:28:33.770] INIT: version 2.96 booting [2025-09-24 11:28:33.882] INIT: Entering runlevel: 5 [2025-09-24 11:28:34.042] mtd32 attached [2025-09-24 11:28:34.042] mtd28 attached [2025-09-24 11:28:34.058] mtd24 attached [2025-09-24 11:28:34.074] ubi0:dml_code is mounted. [2025-09-24 11:28:34.106] RTNETLINK answers: File exists [2025-09-24 11:28:34.163] ubi2:textures is mounted. [2025-09-24 11:28:34.163] ubi1:animations is mounted. [2025-09-24 11:28:34.163] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:28:34.163] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:28:34.163] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:28:34.163] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:28:34.163] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:28:34.163] data.LB_FadeInType0=100 [2025-09-24 11:28:34.163] data.CHLH_FadeInType0=0 [2025-09-24 11:28:34.163] data.WU_FadeInDelay=0 [2025-09-24 11:28:34.163] max_time_out=0 [2025-09-24 11:28:34.163] No splash screen [2025-09-24 11:28:34.163] stop dss Done [2025-09-24 11:28:34.211] /dev/mem opened. [2025-09-24 11:28:34.249] Memory mapped at address 0xffffac942000. [2025-09-24 11:28:34.249] Read at address 0x00600018 (0xffffac942018): 0x00000000 [2025-09-24 11:28:34.249] Write at address 0x00600018 (0xffffac942018): 0x00400040, readback 0x00400040 [2025-09-24 11:28:34.249] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:28:34.249] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:28:34.393] Loaded PowerVR consumer services. [2025-09-24 11:28:34.488] Waiting data available... [2025-09-24 11:28:34.504] 512+0 records in [2025-09-24 11:28:34.504] 512+0 records out [2025-09-24 11:28:34.553] Starting syslogd/klogd: done [2025-09-24 11:28:34.569] DML Start [2025-09-24 11:28:34.729] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:28:34.937] DML res1: 0 [2025-09-24 11:28:35.488] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:28:35.488] Read Success [2025-09-24 11:28:35.488] Verifying certificate... [2025-09-24 11:28:35.728] Verified OK [2025-09-24 11:28:35.744] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:28:37.407] Verified OK [2025-09-24 11:28:37.423] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:28:38.007] Verified OK [2025-09-24 11:28:38.007] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:28:40.485] fs.protected_hardlinks = 1 [2025-09-24 11:28:40.501] fs.protected_symlinks = 1 [2025-09-24 11:28:40.501] kernel.modules_disabled = 1 [2025-09-24 11:28:40.709] [2025-09-24 11:28:40.709] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:28:42.029] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:28:49.764] SBL1:1210.0.1.0 [2025-09-24 11:28:49.812] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:28:51.380] SBL2:1210.0.1.0 [2025-09-24 11:28:51.428] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:28:51.540] j-A [2025-09-24 11:28:58.878] The R5 Autosar Classic is running [2025-09-24 11:28:58.903] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:28:58.903] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:28:59.510] INIT: version 2.96 booting [2025-09-24 11:28:59.622] INIT: Entering runlevel: 5 [2025-09-24 11:28:59.782] mtd32 attached [2025-09-24 11:28:59.782] mtd28 attached [2025-09-24 11:28:59.798] mtd24 attached [2025-09-24 11:28:59.847] RTNETLINK answers: File exists [2025-09-24 11:28:59.909] ubi1:animations is mounted. [2025-09-24 11:28:59.909] ubi0:dml_code is mounted. [2025-09-24 11:28:59.909] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:28:59.909] ubi2:textures is mounted. [2025-09-24 11:28:59.909] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:28:59.909] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:28:59.909] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:28:59.909] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:28:59.909] data.LB_FadeInType0=100 [2025-09-24 11:28:59.909] data.CHLH_FadeInType0=0 [2025-09-24 11:28:59.909] data.WU_FadeInDelay=0 [2025-09-24 11:28:59.909] max_time_out=0 [2025-09-24 11:28:59.909] No splash screen [2025-09-24 11:28:59.909] stop dss Done [2025-09-24 11:28:59.940] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:28:59.974] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:28:59.974] /dev/mem opened. [2025-09-24 11:28:59.974] Memory mapped at address 0xffffa86e3000. [2025-09-24 11:28:59.974] Read at address 0x00600018 (0xffffa86e3018): 0x00000000 [2025-09-24 11:28:59.974] Write at address 0x00600018 (0xffffa86e3018): 0x00400040, readback 0x00400040 [2025-09-24 11:29:00.117] Loaded PowerVR consumer services. [2025-09-24 11:29:00.245] Waiting data available... [2025-09-24 11:29:00.261] 512+0 records in [2025-09-24 11:29:00.261] 512+0 records out [2025-09-24 11:29:00.309] Starting syslogd/klogd: done [2025-09-24 11:29:00.325] DML Start [2025-09-24 11:29:00.485] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:29:00.709] DML res1: 0 [2025-09-24 11:29:01.165] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:29:01.165] Read Success [2025-09-24 11:29:01.165] Verifying certificate... [2025-09-24 11:29:01.453] Verified OK [2025-09-24 11:29:01.468] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:29:03.142] Verified OK [2025-09-24 11:29:03.142] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:29:03.781] Verified OK [2025-09-24 11:29:03.781] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:29:06.435] fs.protected_hardlinks = 1 [2025-09-24 11:29:06.451] fs.protected_symlinks = 1 [2025-09-24 11:29:06.451] kernel.modules_disabled = 1 [2025-09-24 11:29:06.643] [2025-09-24 11:29:06.643] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:29:07.755] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:29:15.501] SBL1:1210.0.1.0 [2025-09-24 11:29:15.549] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:29:17.115] SBL2:1210.0.1.0 [2025-09-24 11:29:17.163] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:29:17.259] j-A [2025-09-24 11:29:24.614] The R5 Autosar Classic is running [2025-09-24 11:29:24.639] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:29:24.639] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:29:25.247] INIT: version 2.96 booting [2025-09-24 11:29:25.359] INIT: Entering runlevel: 5 [2025-09-24 11:29:25.503] mtd24 attached [2025-09-24 11:29:25.519] mtd28 attached [2025-09-24 11:29:25.551] mtd32 attached [2025-09-24 11:29:25.551] ubi0:textures is mounted. [2025-09-24 11:29:25.583] ubi1:animations is mounted. [2025-09-24 11:29:25.583] RTNETLINK answers: File exists [2025-09-24 11:29:25.641] ubi2:dml_code is mounted. [2025-09-24 11:29:25.641] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:29:25.641] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:29:25.641] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:29:25.641] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:29:25.641] data.LB_FadeInType0=100 [2025-09-24 11:29:25.641] data.CHLH_FadeInType0=0 [2025-09-24 11:29:25.641] data.WU_FadeInDelay=0 [2025-09-24 11:29:25.641] max_time_out=0 [2025-09-24 11:29:25.641] No splash screen [2025-09-24 11:29:25.641] stop dss Done [2025-09-24 11:29:25.641] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:29:25.672] /dev/mem opened. [2025-09-24 11:29:25.710] Memory mapped at address 0xffff9ec39000. [2025-09-24 11:29:25.710] Read at address 0x00600018 (0xffff9ec39018): 0x00000000 [2025-09-24 11:29:25.710] Write at address 0x00600018 (0xffff9ec39018): 0x00400040, readback 0x00400040 [2025-09-24 11:29:25.710] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:29:25.710] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:29:25.822] Loaded PowerVR consumer services. [2025-09-24 11:29:25.965] Waiting data available... [2025-09-24 11:29:25.981] 512+0 records in [2025-09-24 11:29:25.981] 512+0 records out [2025-09-24 11:29:26.029] Starting syslogd/klogd: done [2025-09-24 11:29:26.046] DML Start [2025-09-24 11:29:26.237] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:29:26.413] DML res1: 0 [2025-09-24 11:29:26.923] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:29:26.923] Read Success [2025-09-24 11:29:26.923] Verifying certificate... [2025-09-24 11:29:27.147] Verified OK [2025-09-24 11:29:27.164] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:29:28.866] Verified OK [2025-09-24 11:29:28.866] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:29:29.441] Verified OK [2025-09-24 11:29:29.441] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:29:32.015] fs.protected_hardlinks = 1 [2025-09-24 11:29:32.015] fs.protected_symlinks = 1 [2025-09-24 11:29:32.031] kernel.modules_disabled = 1 [2025-09-24 11:29:32.207] [2025-09-24 11:29:32.207] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:29:33.470] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:29:41.240] SBL1:1210.0.1.0 [2025-09-24 11:29:41.288] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:29:42.854] SBL2:1210.0.1.0 [2025-09-24 11:29:42.902] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:29:43.015] j-A [2025-09-24 11:29:50.354] The R5 Autosar Classic is running [2025-09-24 11:29:50.379] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:29:50.379] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:29:50.986] INIT: version 2.96 booting [2025-09-24 11:29:51.099] INIT: Entering runlevel: 5 [2025-09-24 11:29:51.242] mtd28 attached [2025-09-24 11:29:51.258] mtd32 attached [2025-09-24 11:29:51.274] mtd24 attached [2025-09-24 11:29:51.322] ubi0:animations is mounted. [2025-09-24 11:29:51.322] RTNETLINK answers: File exists [2025-09-24 11:29:51.379] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:29:51.379] ubi2:textures is mounted. [2025-09-24 11:29:51.379] ubi1:dml_code is mounted. [2025-09-24 11:29:51.379] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:29:51.379] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:29:51.379] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:29:51.379] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:29:51.379] data.LB_FadeInType0=100 [2025-09-24 11:29:51.379] data.CHLH_FadeInType0=0 [2025-09-24 11:29:51.379] data.WU_FadeInDelay=0 [2025-09-24 11:29:51.379] max_time_out=0 [2025-09-24 11:29:51.379] No splash screen [2025-09-24 11:29:51.379] stop dss Done [2025-09-24 11:29:51.427] /dev/mem opened. [2025-09-24 11:29:51.427] Memory mapped at address 0xffff85528000. [2025-09-24 11:29:51.454] Read at address 0x00600018 (0xffff85528018): 0x00000000 [2025-09-24 11:29:51.454] Write at address 0x00600018 (0xffff85528018): 0x00400040, readback 0x00400040 [2025-09-24 11:29:51.469] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:29:51.485] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:29:51.565] Loaded PowerVR consumer services. [2025-09-24 11:29:51.723] Waiting data available... [2025-09-24 11:29:51.723] 512+0 records in [2025-09-24 11:29:51.723] 512+0 records out [2025-09-24 11:29:51.755] Starting syslogd/klogd: done [2025-09-24 11:29:51.771] DML Start [2025-09-24 11:29:51.963] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:29:52.187] DML res1: 0 [2025-09-24 11:29:52.592] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:29:52.592] Read Success [2025-09-24 11:29:52.592] Verifying certificate... [2025-09-24 11:29:52.817] Verified OK [2025-09-24 11:29:52.833] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:29:54.443] Verified OK [2025-09-24 11:29:54.443] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:29:54.987] Verified OK [2025-09-24 11:29:54.987] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:29:57.832] fs.protected_hardlinks = 1 [2025-09-24 11:29:57.848] fs.protected_symlinks = 1 [2025-09-24 11:29:57.848] kernel.modules_disabled = 1 [2025-09-24 11:29:58.040] [2025-09-24 11:29:58.040] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:29:59.278] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:30:06.967] SBL1:1210.0.1.0 [2025-09-24 11:30:07.015] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:30:08.582] SBL2:1210.0.1.0 [2025-09-24 11:30:08.630] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:30:08.742] j-A [2025-09-24 11:30:16.082] The R5 Autosar Classic is running [2025-09-24 11:30:16.107] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:30:16.107] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:30:16.714] INIT: version 2.96 booting [2025-09-24 11:30:16.827] INIT: Entering runlevel: 5 [2025-09-24 11:30:16.986] mtd24 attached [2025-09-24 11:30:17.002] mtd28 attached [2025-09-24 11:30:17.034] mtd32 attached [2025-09-24 11:30:17.034] ubi0:textures is mounted. [2025-09-24 11:30:17.051] ubi1:animations is mounted. [2025-09-24 11:30:17.067] RTNETLINK answers: File exists [2025-09-24 11:30:17.094] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:30:17.094] ubi2:dml_code is mounted. [2025-09-24 11:30:17.094] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:30:17.094] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:30:17.094] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:30:17.120] data.LB_FadeInType0=100 [2025-09-24 11:30:17.120] data.CHLH_FadeInType0=0 [2025-09-24 11:30:17.120] data.WU_FadeInDelay=0 [2025-09-24 11:30:17.120] max_time_out=0 [2025-09-24 11:30:17.120] No splash screen [2025-09-24 11:30:17.120] stop dss Done [2025-09-24 11:30:17.120] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:30:17.193] /dev/mem opened. [2025-09-24 11:30:17.193] Memory mapped at address 0xffffbd5ba000. [2025-09-24 11:30:17.193] Read at address 0x00600018 (0xffffbd5ba018): 0x00000000 [2025-09-24 11:30:17.193] Write at address 0x00600018 (0xffffbd5ba018): 0x00400040, readback 0x00400040 [2025-09-24 11:30:17.208] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:30:17.224] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:30:17.304] Loaded PowerVR consumer services. [2025-09-24 11:30:17.449] Waiting data available... [2025-09-24 11:30:17.465] 512+0 records in [2025-09-24 11:30:17.465] 512+0 records out [2025-09-24 11:30:17.512] Starting syslogd/klogd: done [2025-09-24 11:30:17.528] DML Start [2025-09-24 11:30:17.704] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:30:17.896] DML res1: 0 [2025-09-24 11:30:18.407] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:30:18.407] Read Success [2025-09-24 11:30:18.407] Verifying certificate... [2025-09-24 11:30:18.711] Verified OK [2025-09-24 11:30:18.726] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:30:20.325] Verified OK [2025-09-24 11:30:20.325] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:30:20.932] Verified OK [2025-09-24 11:30:20.932] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:30:23.522] fs.protected_hardlinks = 1 [2025-09-24 11:30:23.538] fs.protected_symlinks = 1 [2025-09-24 11:30:23.538] kernel.modules_disabled = 1 [2025-09-24 11:30:23.729] [2025-09-24 11:30:23.729] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:30:24.956] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:30:32.707] SBL1:1210.0.1.0 [2025-09-24 11:30:32.755] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:30:34.321] SBL2:1210.0.1.0 [2025-09-24 11:30:34.369] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:30:34.465] j-A [2025-09-24 11:30:41.820] The R5 Autosar Classic is running [2025-09-24 11:30:41.820] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:30:41.841] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:30:42.449] INIT: version 2.96 booting [2025-09-24 11:30:42.561] INIT: Entering runlevel: 5 [2025-09-24 11:30:42.722] mtd28 attached [2025-09-24 11:30:42.722] mtd24 attached [2025-09-24 11:30:42.738] mtd32 attached [2025-09-24 11:30:42.843] RTNETLINK answers: File exists [2025-09-24 11:30:42.843] ubi1:textures is mounted. [2025-09-24 11:30:42.843] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:30:42.843] ubi0:animations is mounted. [2025-09-24 11:30:42.843] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:30:42.843] ubi2:dml_code is mounted. [2025-09-24 11:30:42.843] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:30:42.843] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:30:42.843] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:30:42.843] data.LB_FadeInType0=100 [2025-09-24 11:30:42.843] data.CHLH_FadeInType0=0 [2025-09-24 11:30:42.843] data.WU_FadeInDelay=0 [2025-09-24 11:30:42.843] max_time_out=0 [2025-09-24 11:30:42.843] No splash screen [2025-09-24 11:30:42.843] stop dss Done [2025-09-24 11:30:42.891] /dev/mem opened. [2025-09-24 11:30:42.940] Memory mapped at address 0xffffbedf8000. [2025-09-24 11:30:42.940] Read at address 0x00600018 (0xffffbedf8018): 0x00000000 [2025-09-24 11:30:42.940] Write at address 0x00600018 (0xffffbedf8018): 0x00400040, readback 0x00400040 [2025-09-24 11:30:42.940] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:30:42.940] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:30:43.052] Loaded PowerVR consumer services. [2025-09-24 11:30:43.207] Waiting data available... [2025-09-24 11:30:43.207] 512+0 records in [2025-09-24 11:30:43.207] 512+0 records out [2025-09-24 11:30:43.223] Starting syslogd/klogd: done [2025-09-24 11:30:43.239] DML Start [2025-09-24 11:30:43.416] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:30:43.656] DML res1: 0 [2025-09-24 11:30:44.050] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:30:44.050] Read Success [2025-09-24 11:30:44.050] Verifying certificate... [2025-09-24 11:30:44.338] Verified OK [2025-09-24 11:30:44.370] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:30:46.013] Verified OK [2025-09-24 11:30:46.013] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:30:46.476] Verified OK [2025-09-24 11:30:46.476] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:30:49.210] fs.protected_hardlinks = 1 [2025-09-24 11:30:49.210] fs.protected_symlinks = 1 [2025-09-24 11:30:49.226] kernel.modules_disabled = 1 [2025-09-24 11:30:49.418] [2025-09-24 11:30:49.418] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:30:50.677] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:30:58.423] SBL1:1210.0.1.0 [2025-09-24 11:30:58.471] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:31:00.039] SBL2:1210.0.1.0 [2025-09-24 11:31:00.086] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:31:00.182] j-A [2025-09-24 11:31:07.537] The R5 Autosar Classic is running [2025-09-24 11:31:07.537] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:31:07.558] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:31:08.166] INIT: version 2.96 booting [2025-09-24 11:31:08.278] INIT: Entering runlevel: 5 [2025-09-24 11:31:08.438] mtd32 attached [2025-09-24 11:31:08.438] mtd28 attached [2025-09-24 11:31:08.454] mtd24 attached [2025-09-24 11:31:08.502] ubi1:animations is mounted. [2025-09-24 11:31:08.523] ubi0:dml_code is mounted. [2025-09-24 11:31:08.523] RTNETLINK answers: File exists [2025-09-24 11:31:08.523] ubi2:textures is mounted. [2025-09-24 11:31:08.572] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:31:08.572] data.LB_FadeInType0=100 [2025-09-24 11:31:08.572] data.CHLH_FadeInType0=0 [2025-09-24 11:31:08.572] data.WU_FadeInDelay=0 [2025-09-24 11:31:08.572] max_time_out=0 [2025-09-24 11:31:08.572] No splash screen [2025-09-24 11:31:08.572] stop dss Done [2025-09-24 11:31:08.572] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:31:08.572] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:31:08.572] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:31:08.572] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:31:08.637] /dev/mem opened. [2025-09-24 11:31:08.637] Memory mapped at address 0xffffb42d9000. [2025-09-24 11:31:08.637] Read at address 0x00600018 (0xffffb42d9018): 0x00000000 [2025-09-24 11:31:08.637] Write at address 0x00600018 (0xffffb42d9018): 0x00400040, readback 0x00400040 [2025-09-24 11:31:08.637] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:31:08.637] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:31:08.797] Loaded PowerVR consumer services. [2025-09-24 11:31:08.908] Waiting data available... [2025-09-24 11:31:08.924] 512+0 records in [2025-09-24 11:31:08.924] 512+0 records out [2025-09-24 11:31:08.940] Starting syslogd/klogd: done [2025-09-24 11:31:08.972] DML Start [2025-09-24 11:31:09.164] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:31:09.389] DML res1: 0 [2025-09-24 11:31:09.813] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:31:09.813] Read Success [2025-09-24 11:31:09.813] Verifying certificate... [2025-09-24 11:31:10.053] Verified OK [2025-09-24 11:31:10.069] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:31:11.674] Verified OK [2025-09-24 11:31:11.674] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:31:12.353] Verified OK [2025-09-24 11:31:12.353] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:31:15.024] fs.protected_hardlinks = 1 [2025-09-24 11:31:15.040] fs.protected_symlinks = 1 [2025-09-24 11:31:15.040] kernel.modules_disabled = 1 [2025-09-24 11:31:15.248] [2025-09-24 11:31:15.248] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:31:16.467] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:31:24.155] SBL1:1210.0.1.0 [2025-09-24 11:31:24.203] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:31:25.770] SBL2:1210.0.1.0 [2025-09-24 11:31:25.818] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:31:25.913] j-A [2025-09-24 11:31:33.270] The R5 Autosar Classic is running [2025-09-24 11:31:33.270] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:31:33.291] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:31:33.898] INIT: version 2.96 booting [2025-09-24 11:31:34.010] INIT: Entering runlevel: 5 [2025-09-24 11:31:34.153] mtd24 attached [2025-09-24 11:31:34.170] mtd32 attached [2025-09-24 11:31:34.186] mtd28 attached [2025-09-24 11:31:34.292] ubi0:textures is mounted. [2025-09-24 11:31:34.292] ubi1:dml_code is mounted. [2025-09-24 11:31:34.292] RTNETLINK answers: File exists [2025-09-24 11:31:34.292] ubi2:animations is mounted. [2025-09-24 11:31:34.292] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:31:34.292] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:31:34.292] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:31:34.292] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:31:34.292] data.LB_FadeInType0=100 [2025-09-24 11:31:34.292] data.CHLH_FadeInType0=0 [2025-09-24 11:31:34.292] data.WU_FadeInDelay=0 [2025-09-24 11:31:34.292] max_time_out=0 [2025-09-24 11:31:34.292] No splash screen [2025-09-24 11:31:34.292] stop dss Done [2025-09-24 11:31:34.292] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:31:34.375] /dev/mem opened. [2025-09-24 11:31:34.375] Memory mapped at address 0xffff870db000. [2025-09-24 11:31:34.375] Read at address 0x00600018 (0xffff870db018): 0x00000000 [2025-09-24 11:31:34.375] Write at address 0x00600018 (0xffff870db018): 0x00400040, readback 0x00400040 [2025-09-24 11:31:34.375] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:31:34.375] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:31:34.519] Loaded PowerVR consumer services. [2025-09-24 11:31:34.630] Waiting data available... [2025-09-24 11:31:34.662] 512+0 records in [2025-09-24 11:31:34.662] 512+0 records out [2025-09-24 11:31:34.711] Starting syslogd/klogd: done [2025-09-24 11:31:34.727] DML Start [2025-09-24 11:31:34.918] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:31:35.142] DML res1: 0 [2025-09-24 11:31:35.558] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:31:35.579] Read Success [2025-09-24 11:31:35.579] Verifying certificate... [2025-09-24 11:31:35.819] Verified OK [2025-09-24 11:31:35.835] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:31:37.346] Verified OK [2025-09-24 11:31:37.346] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:31:37.952] Verified OK [2025-09-24 11:31:37.952] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:31:40.719] fs.protected_hardlinks = 1 [2025-09-24 11:31:40.734] fs.protected_symlinks = 1 [2025-09-24 11:31:40.734] kernel.modules_disabled = 1 [2025-09-24 11:31:40.926] [2025-09-24 11:31:40.926] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:31:42.235] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:31:49.872] SBL1:1210.0.1.0 [2025-09-24 11:31:49.920] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:31:51.487] SBL2:1210.0.1.0 [2025-09-24 11:31:51.535] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:31:51.647] j-A [2025-09-24 11:31:58.986] The R5 Autosar Classic is running [2025-09-24 11:31:59.011] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:31:59.011] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:31:59.619] INIT: version 2.96 booting [2025-09-24 11:31:59.731] INIT: Entering runlevel: 5 [2025-09-24 11:31:59.891] mtd24 attached [2025-09-24 11:31:59.891] mtd28 attached [2025-09-24 11:31:59.906] mtd32 attached [2025-09-24 11:31:59.954] ubi0:textures is mounted. [2025-09-24 11:31:59.954] RTNETLINK answers: File exists [2025-09-24 11:32:00.017] ubi1:animations is mounted. [2025-09-24 11:32:00.017] ubi2:dml_code is mounted. [2025-09-24 11:32:00.017] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:32:00.017] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:32:00.017] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:32:00.017] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:32:00.017] data.LB_FadeInType0=100 [2025-09-24 11:32:00.017] data.CHLH_FadeInType0=0 [2025-09-24 11:32:00.017] data.WU_FadeInDelay=0 [2025-09-24 11:32:00.017] max_time_out=0 [2025-09-24 11:32:00.017] No splash screen [2025-09-24 11:32:00.017] stop dss Done [2025-09-24 11:32:00.017] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:32:00.086] /dev/mem opened. [2025-09-24 11:32:00.086] Memory mapped at address 0xffff9cae9000. [2025-09-24 11:32:00.086] Read at address 0x00600018 (0xffff9cae9018): 0x00000000 [2025-09-24 11:32:00.086] Write at address 0x00600018 (0xffff9cae9018): 0x00400040, readback 0x00400040 [2025-09-24 11:32:00.102] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:32:00.118] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:32:00.326] Loaded PowerVR consumer services. [2025-09-24 11:32:00.386] 512+0 records in [2025-09-24 11:32:00.386] 512+0 records out [2025-09-24 11:32:00.386] Waiting data available... [2025-09-24 11:32:00.417] Starting syslogd/klogd: done [2025-09-24 11:32:00.433] DML Start [2025-09-24 11:32:00.593] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:32:00.817] DML res1: 0 [2025-09-24 11:32:01.320] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:32:01.320] Read Success [2025-09-24 11:32:01.320] Verifying certificate... [2025-09-24 11:32:01.591] Verified OK [2025-09-24 11:32:01.607] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:32:03.297] Verified OK [2025-09-24 11:32:03.297] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:32:03.888] Verified OK [2025-09-24 11:32:03.909] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:32:06.564] fs.protected_hardlinks = 1 [2025-09-24 11:32:06.564] fs.protected_symlinks = 1 [2025-09-24 11:32:06.580] kernel.modules_disabled = 1 [2025-09-24 11:32:06.772] [2025-09-24 11:32:06.772] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:32:07.883] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:32:15.636] SBL1:1210.0.1.0 [2025-09-24 11:32:15.668] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:32:17.251] SBL2:1210.0.1.0 [2025-09-24 11:32:17.299] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:32:17.395] j-A [2025-09-24 11:32:24.749] The R5 Autosar Classic is running [2025-09-24 11:32:24.749] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:32:24.770] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:32:25.378] INIT: version 2.96 booting [2025-09-24 11:32:25.489] INIT: Entering runlevel: 5 [2025-09-24 11:32:25.650] mtd28 attached [2025-09-24 11:32:25.650] mtd24 attached [2025-09-24 11:32:25.666] mtd32 attached [2025-09-24 11:32:25.714] RTNETLINK answers: File exists [2025-09-24 11:32:25.714] ubi0:animations is mounted. [2025-09-24 11:32:25.752] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:32:25.752] ubi1:textures is mounted. [2025-09-24 11:32:25.752] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:32:25.752] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:32:25.752] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:32:25.752] ubi2:dml_code is mounted. [2025-09-24 11:32:25.752] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:32:25.783] data.LB_FadeInType0=100 [2025-09-24 11:32:25.783] data.CHLH_FadeInType0=0 [2025-09-24 11:32:25.783] data.WU_FadeInDelay=0 [2025-09-24 11:32:25.783] max_time_out=0 [2025-09-24 11:32:25.783] No splash screen [2025-09-24 11:32:25.783] stop dss Done [2025-09-24 11:32:25.799] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:32:25.814] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:32:25.866] /dev/mem opened. [2025-09-24 11:32:25.866] Memory mapped at address 0xffffb75bb000. [2025-09-24 11:32:25.866] Read at address 0x00600018 (0xffffb75bb018): 0x00000000 [2025-09-24 11:32:25.866] Write at address 0x00600018 (0xffffb75bb018): 0x00400040, readback 0x00400040 [2025-09-24 11:32:25.930] Loaded PowerVR consumer services. [2025-09-24 11:32:26.107] Waiting data available... [2025-09-24 11:32:26.138] 512+0 records in [2025-09-24 11:32:26.138] 512+0 records out [2025-09-24 11:32:26.154] Starting syslogd/klogd: done [2025-09-24 11:32:26.186] DML Start [2025-09-24 11:32:26.347] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:32:26.522] DML res1: 0 [2025-09-24 11:32:27.082] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:32:27.098] Read Success [2025-09-24 11:32:27.098] Verifying certificate... [2025-09-24 11:32:27.321] Verified OK [2025-09-24 11:32:27.337] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:32:29.049] Verified OK [2025-09-24 11:32:29.049] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:32:29.641] Verified OK [2025-09-24 11:32:29.662] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:32:32.220] fs.protected_hardlinks = 1 [2025-09-24 11:32:32.250] fs.protected_symlinks = 1 [2025-09-24 11:32:32.250] kernel.modules_disabled = 1 [2025-09-24 11:32:32.442] [2025-09-24 11:32:32.442] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:32:33.653] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:32:41.362] SBL1:1210.0.1.0 [2025-09-24 11:32:41.410] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:32:42.976] SBL2:1210.0.1.0 [2025-09-24 11:32:43.024] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:32:43.136] j-A [2025-09-24 11:32:50.475] The R5 Autosar Classic is running [2025-09-24 11:32:50.506] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:32:50.506] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:32:51.114] INIT: version 2.96 booting [2025-09-24 11:32:51.225] INIT: Entering runlevel: 5 [2025-09-24 11:32:51.370] mtd24 attached [2025-09-24 11:32:51.386] mtd28 attached [2025-09-24 11:32:51.418] mtd32 attached [2025-09-24 11:32:51.418] ubi0:textures is mounted. [2025-09-24 11:32:51.433] ubi1:animations is mounted. [2025-09-24 11:32:51.512] RTNETLINK answers: File exists [2025-09-24 11:32:51.512] ubi2:dml_code is mounted. [2025-09-24 11:32:51.512] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:32:51.512] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:32:51.512] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:32:51.512] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:32:51.512] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:32:51.512] data.LB_FadeInType0=100 [2025-09-24 11:32:51.512] data.CHLH_FadeInType0=0 [2025-09-24 11:32:51.512] data.WU_FadeInDelay=0 [2025-09-24 11:32:51.512] max_time_out=0 [2025-09-24 11:32:51.512] No splash screen [2025-09-24 11:32:51.512] stop dss Done [2025-09-24 11:32:51.560] /dev/mem opened. [2025-09-24 11:32:51.608] Memory mapped at address 0xffff83a49000. [2025-09-24 11:32:51.608] Read at address 0x00600018 (0xffff83a49018): 0x00000000 [2025-09-24 11:32:51.608] Write at address 0x00600018 (0xffff83a49018): 0x00400040, readback 0x00400040 [2025-09-24 11:32:51.608] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:32:51.608] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:32:51.800] Loaded PowerVR consumer services. [2025-09-24 11:32:51.847] Waiting data available... [2025-09-24 11:32:51.863] 512+0 records in [2025-09-24 11:32:51.863] 512+0 records out [2025-09-24 11:32:51.896] Starting syslogd/klogd: done [2025-09-24 11:32:51.912] DML Start [2025-09-24 11:32:52.056] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:32:52.280] DML res1: 0 [2025-09-24 11:32:52.727] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:32:52.748] Read Success [2025-09-24 11:32:52.748] Verifying certificate... [2025-09-24 11:32:53.004] Verified OK [2025-09-24 11:32:53.020] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:32:54.743] Verified OK [2025-09-24 11:32:54.743] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:32:55.367] Verified OK [2025-09-24 11:32:55.367] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:32:57.974] fs.protected_hardlinks = 1 [2025-09-24 11:32:57.974] fs.protected_symlinks = 1 [2025-09-24 11:32:57.990] kernel.modules_disabled = 1 [2025-09-24 11:32:58.182] [2025-09-24 11:32:58.182] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:32:59.353] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:33:07.122] SBL1:1210.0.1.0 [2025-09-24 11:33:07.170] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:33:08.737] SBL2:1210.0.1.0 [2025-09-24 11:33:08.785] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:33:08.880] j-A [2025-09-24 11:33:16.235] The R5 Autosar Classic is running [2025-09-24 11:33:16.257] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:33:16.257] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:33:16.864] INIT: version 2.96 booting [2025-09-24 11:33:16.976] INIT: Entering runlevel: 5 [2025-09-24 11:33:17.137] mtd28 attached [2025-09-24 11:33:17.152] mtd24 attached [2025-09-24 11:33:17.169] mtd32 attached [2025-09-24 11:33:17.200] ubi0:animations is mounted. [2025-09-24 11:33:17.250] RTNETLINK answers: File exists [2025-09-24 11:33:17.250] ubi1:textures is mounted. [2025-09-24 11:33:17.250] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:33:17.250] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:33:17.250] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:33:17.250] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:33:17.250] ubi2:dml_code is mounted. [2025-09-24 11:33:17.250] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:33:17.276] data.LB_FadeInType0=100 [2025-09-24 11:33:17.276] data.CHLH_FadeInType0=0 [2025-09-24 11:33:17.276] data.WU_FadeInDelay=0 [2025-09-24 11:33:17.276] max_time_out=0 [2025-09-24 11:33:17.276] No splash screen [2025-09-24 11:33:17.276] stop dss Done [2025-09-24 11:33:17.303] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:33:17.303] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:33:17.356] /dev/mem opened. [2025-09-24 11:33:17.356] Memory mapped at address 0xffffbf0b7000. [2025-09-24 11:33:17.356] Read at address 0x00600018 (0xffffbf0b7018): 0x00000000 [2025-09-24 11:33:17.356] Write at address 0x00600018 (0xffffbf0b7018): 0x00400040, readback 0x00400040 [2025-09-24 11:33:17.436] Loaded PowerVR consumer services. [2025-09-24 11:33:17.596] Waiting data available... [2025-09-24 11:33:17.612] 512+0 records in [2025-09-24 11:33:17.612] 512+0 records out [2025-09-24 11:33:17.659] Starting syslogd/klogd: done [2025-09-24 11:33:17.675] DML Start [2025-09-24 11:33:17.884] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:33:18.123] DML res1: 0 [2025-09-24 11:33:18.466] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:33:18.466] Read Success [2025-09-24 11:33:18.466] Verifying certificate... [2025-09-24 11:33:18.738] Verified OK [2025-09-24 11:33:18.754] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:33:20.369] Verified OK [2025-09-24 11:33:20.385] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:33:20.987] Verified OK [2025-09-24 11:33:20.987] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:33:23.657] fs.protected_hardlinks = 1 [2025-09-24 11:33:23.673] fs.protected_symlinks = 1 [2025-09-24 11:33:23.673] kernel.modules_disabled = 1 [2025-09-24 11:33:23.865] [2025-09-24 11:33:23.865] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:33:25.204] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:33:32.832] SBL1:1210.0.1.0 [2025-09-24 11:33:32.881] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:33:34.464] SBL2:1210.0.1.0 [2025-09-24 11:33:34.496] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:33:34.607] j-A [2025-09-24 11:33:41.979] The R5 Autosar Classic is running [2025-09-24 11:33:41.979] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:33:41.979] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:33:42.585] INIT: version 2.96 booting [2025-09-24 11:33:42.697] INIT: Entering runlevel: 5 [2025-09-24 11:33:42.842] mtd28 attached [2025-09-24 11:33:42.858] mtd24 attached [2025-09-24 11:33:42.874] mtd32 attached [2025-09-24 11:33:42.921] RTNETLINK answers: File exists [2025-09-24 11:33:42.921] ubi0:animations is mounted. [2025-09-24 11:33:42.980] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:33:42.980] ubi1:textures is mounted. [2025-09-24 11:33:42.980] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:33:42.980] ubi2:dml_code is mounted. [2025-09-24 11:33:42.980] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:33:42.980] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:33:42.980] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:33:42.980] data.LB_FadeInType0=100 [2025-09-24 11:33:42.980] data.CHLH_FadeInType0=0 [2025-09-24 11:33:42.980] data.WU_FadeInDelay=0 [2025-09-24 11:33:42.980] max_time_out=0 [2025-09-24 11:33:42.980] No splash screen [2025-09-24 11:33:42.980] stop dss Done [2025-09-24 11:33:43.061] /dev/mem opened. [2025-09-24 11:33:43.061] Memory mapped at address 0xffffa194d000. [2025-09-24 11:33:43.061] Read at address 0x00600018 (0xffffa194d018): 0x00000000 [2025-09-24 11:33:43.061] Write at address 0x00600018 (0xffffa194d018): 0x00400040, readback 0x00400040 [2025-09-24 11:33:43.093] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:33:43.109] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:33:43.301] Loaded PowerVR consumer services. [2025-09-24 11:33:43.317] Waiting data available... [2025-09-24 11:33:43.349] 512+0 records in [2025-09-24 11:33:43.349] 512+0 records out [2025-09-24 11:33:43.397] Starting syslogd/klogd: done [2025-09-24 11:33:43.397] DML Start [2025-09-24 11:33:43.573] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:33:43.749] DML res1: 0 [2025-09-24 11:33:44.277] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:33:44.293] Read Success [2025-09-24 11:33:44.293] Verifying certificate... [2025-09-24 11:33:44.580] Verified OK [2025-09-24 11:33:44.612] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:33:46.291] Verified OK [2025-09-24 11:33:46.291] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:33:46.882] Verified OK [2025-09-24 11:33:46.903] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:33:49.350] fs.protected_hardlinks = 1 [2025-09-24 11:33:49.350] fs.protected_symlinks = 1 [2025-09-24 11:33:49.365] kernel.modules_disabled = 1 [2025-09-24 11:33:49.557] [2025-09-24 11:33:49.557] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:33:50.832] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:33:58.563] SBL1:1210.0.1.0 [2025-09-24 11:33:58.611] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:34:00.177] SBL2:1210.0.1.0 [2025-09-24 11:34:00.225] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:34:00.337] j-A [2025-09-24 11:34:07.706] The R5 Autosar Classic is running [2025-09-24 11:34:07.706] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:34:07.706] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:34:08.314] INIT: version 2.96 booting [2025-09-24 11:34:08.426] INIT: Entering runlevel: 5 [2025-09-24 11:34:08.586] mtd24 attached [2025-09-24 11:34:08.586] mtd28 attached [2025-09-24 11:34:08.602] mtd32 attached [2025-09-24 11:34:08.634] ubi0:textures is mounted. [2025-09-24 11:34:08.650] RTNETLINK answers: File exists [2025-09-24 11:34:08.650] ubi1:animations is mounted. [2025-09-24 11:34:08.710] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:34:08.710] ubi2:dml_code is mounted. [2025-09-24 11:34:08.710] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:34:08.710] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:34:08.710] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:34:08.710] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:34:08.710] data.LB_FadeInType0=100 [2025-09-24 11:34:08.710] data.CHLH_FadeInType0=0 [2025-09-24 11:34:08.710] data.WU_FadeInDelay=0 [2025-09-24 11:34:08.710] max_time_out=0 [2025-09-24 11:34:08.710] No splash screen [2025-09-24 11:34:08.710] stop dss Done [2025-09-24 11:34:08.758] /dev/mem opened. [2025-09-24 11:34:08.801] Memory mapped at address 0xffffa6b89000. [2025-09-24 11:34:08.801] Read at address 0x00600018 (0xffffa6b89018): 0x00000000 [2025-09-24 11:34:08.801] Write at address 0x00600018 (0xffffa6b89018): 0x00400040, readback 0x00400040 [2025-09-24 11:34:08.801] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:34:08.801] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:34:08.945] Loaded PowerVR consumer services. [2025-09-24 11:34:09.072] Waiting data available... [2025-09-24 11:34:09.088] 512+0 records in [2025-09-24 11:34:09.088] 512+0 records out [2025-09-24 11:34:09.136] Starting syslogd/klogd: done [2025-09-24 11:34:09.152] DML Start [2025-09-24 11:34:09.329] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:34:09.569] DML res1: 0 [2025-09-24 11:34:09.977] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:34:09.977] Read Success [2025-09-24 11:34:09.977] Verifying certificate... [2025-09-24 11:34:10.265] Verified OK [2025-09-24 11:34:10.281] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:34:11.871] Verified OK [2025-09-24 11:34:11.871] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:34:12.460] Verified OK [2025-09-24 11:34:12.460] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:34:14.954] fs.protected_hardlinks = 1 [2025-09-24 11:34:14.954] fs.protected_symlinks = 1 [2025-09-24 11:34:14.970] kernel.modules_disabled = 1 [2025-09-24 11:34:15.162] [2025-09-24 11:34:15.162] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:34:16.659] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:34:24.326] SBL1:1210.0.1.0 [2025-09-24 11:34:24.358] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:34:25.941] SBL2:1210.0.1.0 [2025-09-24 11:34:25.973] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:34:26.085] j-A [2025-09-24 11:34:33.457] The R5 Autosar Classic is running [2025-09-24 11:34:33.457] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:34:33.457] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:34:34.065] INIT: version 2.96 booting [2025-09-24 11:34:34.176] INIT: Entering runlevel: 5 [2025-09-24 11:34:34.320] mtd28 attached [2025-09-24 11:34:34.336] mtd24 attached [2025-09-24 11:34:34.352] mtd32 attached [2025-09-24 11:34:34.400] RTNETLINK answers: File exists [2025-09-24 11:34:34.440] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:34:34.440] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:34:34.440] ubi0:animations is mounted. [2025-09-24 11:34:34.440] ubi1:textures is mounted. [2025-09-24 11:34:34.440] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:34:34.440] ubi2:dml_code is mounted. [2025-09-24 11:34:34.440] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:34:34.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:34:34.466] data.LB_FadeInType0=100 [2025-09-24 11:34:34.466] data.CHLH_FadeInType0=0 [2025-09-24 11:34:34.466] data.WU_FadeInDelay=0 [2025-09-24 11:34:34.466] max_time_out=0 [2025-09-24 11:34:34.466] No splash screen [2025-09-24 11:34:34.466] stop dss Done [2025-09-24 11:34:34.528] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:34:34.528] /dev/mem opened. [2025-09-24 11:34:34.528] Memory mapped at address 0xffff7f95c000. [2025-09-24 11:34:34.528] Read at address 0x00600018 (0xffff7f95c018): 0x00000000 [2025-09-24 11:34:34.528] Write at address 0x00600018 (0xffff7f95c018): 0x00400040, readback 0x00400040 [2025-09-24 11:34:34.528] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:34:34.656] Loaded PowerVR consumer services. [2025-09-24 11:34:34.784] Waiting data available... [2025-09-24 11:34:34.800] 512+0 records in [2025-09-24 11:34:34.800] 512+0 records out [2025-09-24 11:34:34.833] Starting syslogd/klogd: done [2025-09-24 11:34:34.848] DML Start [2025-09-24 11:34:35.040] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:34:35.263] DML res1: 0 [2025-09-24 11:34:35.722] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:34:35.722] Read Success [2025-09-24 11:34:35.722] Verifying certificate... [2025-09-24 11:34:35.945] Verified OK [2025-09-24 11:34:35.961] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:34:37.640] Verified OK [2025-09-24 11:34:37.640] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:34:38.232] Verified OK [2025-09-24 11:34:38.232] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:34:40.885] fs.protected_hardlinks = 1 [2025-09-24 11:34:40.901] fs.protected_symlinks = 1 [2025-09-24 11:34:40.917] kernel.modules_disabled = 1 [2025-09-24 11:34:41.125] [2025-09-24 11:34:41.125] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:34:42.281] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:34:50.074] SBL1:1210.0.1.0 [2025-09-24 11:34:50.106] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:34:51.689] SBL2:1210.0.1.0 [2025-09-24 11:34:51.721] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:34:51.833] j-A [2025-09-24 11:34:59.206] The R5 Autosar Classic is running [2025-09-24 11:34:59.206] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:34:59.206] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:34:59.813] INIT: version 2.96 booting [2025-09-24 11:34:59.925] INIT: Entering runlevel: 5 [2025-09-24 11:35:00.069] mtd28 attached [2025-09-24 11:35:00.084] mtd24 attached [2025-09-24 11:35:00.100] mtd32 attached [2025-09-24 11:35:00.132] ubi0:animations is mounted. [2025-09-24 11:35:00.148] RTNETLINK answers: File exists [2025-09-24 11:35:00.209] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:35:00.209] ubi1:textures is mounted. [2025-09-24 11:35:00.209] ubi2:dml_code is mounted. [2025-09-24 11:35:00.209] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:35:00.209] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:35:00.209] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:35:00.209] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:35:00.209] data.LB_FadeInType0=100 [2025-09-24 11:35:00.209] data.CHLH_FadeInType0=0 [2025-09-24 11:35:00.209] data.WU_FadeInDelay=0 [2025-09-24 11:35:00.209] max_time_out=0 [2025-09-24 11:35:00.209] No splash screen [2025-09-24 11:35:00.209] stop dss Done [2025-09-24 11:35:00.257] /dev/mem opened. [2025-09-24 11:35:00.257] Memory mapped at address 0xffff8a90b000. [2025-09-24 11:35:00.283] Read at address 0x00600018 (0xffff8a90b018): 0x00000000 [2025-09-24 11:35:00.283] Write at address 0x00600018 (0xffff8a90b018): 0x00400040, readback 0x00400040 [2025-09-24 11:35:00.299] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:35:00.315] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:35:00.379] Loaded PowerVR consumer services. [2025-09-24 11:35:00.564] Waiting data available... [2025-09-24 11:35:00.564] 512+0 records in [2025-09-24 11:35:00.564] 512+0 records out [2025-09-24 11:35:00.596] Starting syslogd/klogd: done [2025-09-24 11:35:00.612] DML Start [2025-09-24 11:35:00.771] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:35:00.979] DML res1: 0 [2025-09-24 11:35:01.443] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:35:01.459] Read Success [2025-09-24 11:35:01.459] Verifying certificate... [2025-09-24 11:35:01.731] Verified OK [2025-09-24 11:35:01.747] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:35:03.370] Verified OK [2025-09-24 11:35:03.370] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:35:04.018] Verified OK [2025-09-24 11:35:04.018] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:35:06.577] fs.protected_hardlinks = 1 [2025-09-24 11:35:06.593] fs.protected_symlinks = 1 [2025-09-24 11:35:06.593] kernel.modules_disabled = 1 [2025-09-24 11:35:06.784] [2025-09-24 11:35:06.784] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:35:08.056] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:35:15.828] SBL1:1210.0.1.0 [2025-09-24 11:35:15.876] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:35:17.442] SBL2:1210.0.1.0 [2025-09-24 11:35:17.491] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:35:17.603] j-A [2025-09-24 11:35:24.942] The R5 Autosar Classic is running [2025-09-24 11:35:24.967] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:35:24.967] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:35:25.576] INIT: version 2.96 booting [2025-09-24 11:35:25.687] INIT: Entering runlevel: 5 [2025-09-24 11:35:25.846] mtd24 attached [2025-09-24 11:35:25.846] mtd28 attached [2025-09-24 11:35:25.878] ubi0:textures is mounted. [2025-09-24 11:35:25.878] mtd32 attached [2025-09-24 11:35:25.911] ubi1:animations is mounted. [2025-09-24 11:35:25.911] RTNETLINK answers: File exists [2025-09-24 11:35:25.973] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:35:25.973] ubi2:dml_code is mounted. [2025-09-24 11:35:25.973] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:35:25.973] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:35:25.973] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:35:25.973] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:35:25.973] data.LB_FadeInType0=100 [2025-09-24 11:35:25.973] data.CHLH_FadeInType0=0 [2025-09-24 11:35:25.973] data.WU_FadeInDelay=0 [2025-09-24 11:35:25.973] max_time_out=0 [2025-09-24 11:35:25.973] No splash screen [2025-09-24 11:35:25.973] stop dss Done [2025-09-24 11:35:26.021] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:35:26.061] /dev/mem opened. [2025-09-24 11:35:26.061] Memory mapped at address 0xffffaf0e5000. [2025-09-24 11:35:26.061] Read at address 0x00600018 (0xffffaf0e5018): 0x00000000 [2025-09-24 11:35:26.061] Write at address 0x00600018 (0xffffaf0e5018): 0x00400040, readback 0x00400040 [2025-09-24 11:35:26.061] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:35:26.269] Loaded PowerVR consumer services. [2025-09-24 11:35:26.301] Waiting data available... [2025-09-24 11:35:26.317] 512+0 records in [2025-09-24 11:35:26.333] 512+0 records out [2025-09-24 11:35:26.364] Starting syslogd/klogd: done [2025-09-24 11:35:26.380] DML Start [2025-09-24 11:35:26.541] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:35:26.765] DML res1: 0 [2025-09-24 11:35:27.274] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:35:27.274] Read Success [2025-09-24 11:35:27.274] Verifying certificate... [2025-09-24 11:35:27.546] Verified OK [2025-09-24 11:35:27.546] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:35:29.232] Verified OK [2025-09-24 11:35:29.232] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:35:29.799] Verified OK [2025-09-24 11:35:29.799] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:35:32.308] fs.protected_hardlinks = 1 [2025-09-24 11:35:32.308] fs.protected_symlinks = 1 [2025-09-24 11:35:32.324] kernel.modules_disabled = 1 [2025-09-24 11:35:32.516] [2025-09-24 11:35:32.516] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:35:33.825] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:35:41.556] SBL1:1210.0.1.0 [2025-09-24 11:35:41.604] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:35:43.170] SBL2:1210.0.1.0 [2025-09-24 11:35:43.218] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:35:43.330] j-A [2025-09-24 11:35:50.669] The R5 Autosar Classic is running [2025-09-24 11:35:50.700] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:35:50.700] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:35:51.308] INIT: version 2.96 booting [2025-09-24 11:35:51.420] INIT: Entering runlevel: 5 [2025-09-24 11:35:51.580] mtd24 attached [2025-09-24 11:35:51.580] mtd28 attached [2025-09-24 11:35:51.612] mtd32 attached [2025-09-24 11:35:51.612] ubi0:textures is mounted. [2025-09-24 11:35:51.644] RTNETLINK answers: File exists [2025-09-24 11:35:51.680] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:35:51.680] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:35:51.680] ubi1:animations is mounted. [2025-09-24 11:35:51.680] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:35:51.680] ubi2:dml_code is mounted. [2025-09-24 11:35:51.680] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:35:51.680] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:35:51.711] data.LB_FadeInType0=100 [2025-09-24 11:35:51.711] data.CHLH_FadeInType0=0 [2025-09-24 11:35:51.711] data.WU_FadeInDelay=0 [2025-09-24 11:35:51.711] max_time_out=0 [2025-09-24 11:35:51.711] No splash screen [2025-09-24 11:35:51.711] stop dss Done [2025-09-24 11:35:51.744] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:35:51.760] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:35:51.760] /dev/mem opened. [2025-09-24 11:35:51.792] Memory mapped at address 0xffff9768c000. [2025-09-24 11:35:51.792] Read at address 0x00600018 (0xffff9768c018): 0x00000000 [2025-09-24 11:35:51.792] Write at address 0x00600018 (0xffff9768c018): 0x00400040, readback 0x00400040 [2025-09-24 11:35:52.000] Loaded PowerVR consumer services. [2025-09-24 11:35:52.031] Waiting data available... [2025-09-24 11:35:52.063] 512+0 records in [2025-09-24 11:35:52.063] 512+0 records out [2025-09-24 11:35:52.079] Starting syslogd/klogd: done [2025-09-24 11:35:52.112] DML Start [2025-09-24 11:35:52.288] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:35:52.512] DML res1: 0 [2025-09-24 11:35:52.911] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:35:52.911] Read Success [2025-09-24 11:35:52.927] Verifying certificate... [2025-09-24 11:35:53.199] Verified OK [2025-09-24 11:35:53.215] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:35:54.942] Verified OK [2025-09-24 11:35:54.942] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:35:55.531] Verified OK [2025-09-24 11:35:55.531] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:35:58.137] fs.protected_hardlinks = 1 [2025-09-24 11:35:58.137] fs.protected_symlinks = 1 [2025-09-24 11:35:58.153] kernel.modules_disabled = 1 [2025-09-24 11:35:58.345] [2025-09-24 11:35:58.345] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:35:59.624] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:36:07.299] SBL1:1210.0.1.0 [2025-09-24 11:36:07.347] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:36:08.914] SBL2:1210.0.1.0 [2025-09-24 11:36:08.945] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:36:09.057] j-A [2025-09-24 11:36:16.431] The R5 Autosar Classic is running [2025-09-24 11:36:16.431] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:36:16.431] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:36:17.054] INIT: version 2.96 booting [2025-09-24 11:36:17.165] INIT: Entering runlevel: 5 [2025-09-24 11:36:17.326] mtd32 attached [2025-09-24 11:36:17.326] mtd24 attached [2025-09-24 11:36:17.342] mtd28 attached [2025-09-24 11:36:17.390] ubi0:dml_code is mounted. [2025-09-24 11:36:17.390] RTNETLINK answers: File exists [2025-09-24 11:36:17.454] ubi1:textures is mounted. [2025-09-24 11:36:17.454] ubi2:animations is mounted. [2025-09-24 11:36:17.454] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:36:17.454] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:36:17.454] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:36:17.454] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:36:17.454] data.LB_FadeInType0=100 [2025-09-24 11:36:17.454] data.CHLH_FadeInType0=0 [2025-09-24 11:36:17.454] data.WU_FadeInDelay=0 [2025-09-24 11:36:17.454] max_time_out=0 [2025-09-24 11:36:17.454] No splash screen [2025-09-24 11:36:17.454] stop dss Done [2025-09-24 11:36:17.454] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:36:17.518] /dev/mem opened. [2025-09-24 11:36:17.518] Memory mapped at address 0xffffb4d65000. [2025-09-24 11:36:17.518] Read at address 0x00600018 (0xffffb4d65018): 0x00000000 [2025-09-24 11:36:17.518] Write at address 0x00600018 (0xffffb4d65018): 0x00400040, readback 0x00400040 [2025-09-24 11:36:17.565] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:36:17.565] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:36:17.709] Loaded PowerVR consumer services. [2025-09-24 11:36:17.821] Waiting data available... [2025-09-24 11:36:17.836] 512+0 records in [2025-09-24 11:36:17.836] 512+0 records out [2025-09-24 11:36:17.868] Starting syslogd/klogd: done [2025-09-24 11:36:17.884] DML Start [2025-09-24 11:36:18.077] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:36:18.316] DML res1: 0 [2025-09-24 11:36:18.679] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:36:18.679] Read Success [2025-09-24 11:36:18.679] Verifying certificate... [2025-09-24 11:36:18.887] Verified OK [2025-09-24 11:36:18.903] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:36:20.466] Verified OK [2025-09-24 11:36:20.466] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:36:21.010] Verified OK [2025-09-24 11:36:21.010] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:36:23.840] fs.protected_hardlinks = 1 [2025-09-24 11:36:23.840] fs.protected_symlinks = 1 [2025-09-24 11:36:23.856] kernel.modules_disabled = 1 [2025-09-24 11:36:24.032] [2025-09-24 11:36:24.032] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:36:25.384] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:36:33.047] SBL1:1210.0.1.0 [2025-09-24 11:36:33.095] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:36:34.662] SBL2:1210.0.1.0 [2025-09-24 11:36:34.710] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 11:36:34.806] j-A [2025-09-24 11:36:42.162] The R5 Autosar Classic is running [2025-09-24 11:36:42.184] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:36:42.184] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:36:42.791] INIT: version 2.96 booting [2025-09-24 11:36:42.904] INIT: Entering runlevel: 5 [2025-09-24 11:36:43.047] mtd24 attached [2025-09-24 11:36:43.063] mtd32 attached [2025-09-24 11:36:43.079] mtd28 attached [2025-09-24 11:36:43.111] ubi0:textures is mounted. [2025-09-24 11:36:43.127] RTNETLINK answers: File exists [2025-09-24 11:36:43.191] ubi1:dml_code is mounted. [2025-09-24 11:36:43.191] ubi2:animations is mounted. [2025-09-24 11:36:43.191] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:36:43.191] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:36:43.191] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:36:43.191] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:36:43.191] data.LB_FadeInType0=100 [2025-09-24 11:36:43.191] data.CHLH_FadeInType0=0 [2025-09-24 11:36:43.191] data.WU_FadeInDelay=0 [2025-09-24 11:36:43.191] max_time_out=0 [2025-09-24 11:36:43.191] No splash screen [2025-09-24 11:36:43.191] stop dss Done [2025-09-24 11:36:43.191] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:36:43.231] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:36:43.231] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:36:43.263] /dev/mem opened. [2025-09-24 11:36:43.263] Memory mapped at address 0xffffac409000. [2025-09-24 11:36:43.263] Read at address 0x00600018 (0xffffac409018): 0x00000000 [2025-09-24 11:36:43.263] Write at address 0x00600018 (0xffffac409018): 0x00400040, readback 0x00400040 [2025-09-24 11:36:43.343] Loaded PowerVR consumer services. [2025-09-24 11:36:43.519] Waiting data available... [2025-09-24 11:36:43.535] 512+0 records in [2025-09-24 11:36:43.535] 512+0 records out [2025-09-24 11:36:43.583] Starting syslogd/klogd: done [2025-09-24 11:36:43.599] DML Start [2025-09-24 11:36:43.791] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:36:44.031] DML res1: 0 [2025-09-24 11:36:44.367] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:36:44.390] Read Success [2025-09-24 11:36:44.390] Verifying certificate... [2025-09-24 11:36:44.615] Verified OK [2025-09-24 11:36:44.631] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:36:46.309] Verified OK [2025-09-24 11:36:46.309] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:36:46.942] Verified OK [2025-09-24 11:36:46.942] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:36:49.596] fs.protected_hardlinks = 1 [2025-09-24 11:36:49.627] fs.protected_symlinks = 1 [2025-09-24 11:36:49.627] kernel.modules_disabled = 1 [2025-09-24 11:36:49.820] [2025-09-24 11:36:49.820] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:36:51.092] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:36:58.771] SBL1:1210.0.1.0 [2025-09-24 11:36:58.819] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:37:00.386] SBL2:1210.0.1.0 [2025-09-24 11:37:00.434] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:37:00.545] j-A [2025-09-24 11:37:07.885] The R5 Autosar Classic is running [2025-09-24 11:37:07.910] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:37:07.910] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:37:08.518] INIT: version 2.96 booting [2025-09-24 11:37:08.629] INIT: Entering runlevel: 5 [2025-09-24 11:37:08.773] mtd28 attached [2025-09-24 11:37:08.789] mtd24 attached [2025-09-24 11:37:08.805] mtd32 attached [2025-09-24 11:37:08.910] ubi0:animations is mounted. [2025-09-24 11:37:08.910] RTNETLINK answers: File exists [2025-09-24 11:37:08.910] ubi1:textures is mounted. [2025-09-24 11:37:08.910] ubi2:dml_code is mounted. [2025-09-24 11:37:08.910] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:37:08.910] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:37:08.910] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:37:08.910] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:37:08.910] data.LB_FadeInType0=100 [2025-09-24 11:37:08.910] data.CHLH_FadeInType0=0 [2025-09-24 11:37:08.910] data.WU_FadeInDelay=0 [2025-09-24 11:37:08.910] max_time_out=0 [2025-09-24 11:37:08.910] No splash screen [2025-09-24 11:37:08.910] stop dss Done [2025-09-24 11:37:08.910] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:37:08.958] /dev/mem opened. [2025-09-24 11:37:08.958] Memory mapped at address 0xffffb5757000. [2025-09-24 11:37:08.993] Read at address 0x00600018 (0xffffb5757018): 0x00000000 [2025-09-24 11:37:08.993] Write at address 0x00600018 (0xffffb5757018): 0x00400040, readback 0x00400040 [2025-09-24 11:37:08.993] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:37:08.993] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:37:09.185] Loaded PowerVR consumer services. [2025-09-24 11:37:09.281] Waiting data available... [2025-09-24 11:37:09.313] 512+0 records in [2025-09-24 11:37:09.313] 512+0 records out [2025-09-24 11:37:09.329] Starting syslogd/klogd: done [2025-09-24 11:37:09.361] DML Start [2025-09-24 11:37:09.505] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:37:09.713] DML res1: 0 [2025-09-24 11:37:10.176] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:37:10.192] Read Success [2025-09-24 11:37:10.192] Verifying certificate... [2025-09-24 11:37:10.449] Verified OK [2025-09-24 11:37:10.449] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:37:12.245] Verified OK [2025-09-24 11:37:12.245] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:37:12.741] Verified OK [2025-09-24 11:37:12.741] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:37:15.236] fs.protected_hardlinks = 1 [2025-09-24 11:37:15.252] fs.protected_symlinks = 1 [2025-09-24 11:37:15.252] kernel.modules_disabled = 1 [2025-09-24 11:37:15.460] [2025-09-24 11:37:15.460] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:37:16.849] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:37:24.527] SBL1:1210.0.1.0 [2025-09-24 11:37:24.575] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:37:26.141] SBL2:1210.0.1.0 [2025-09-24 11:37:26.189] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:37:26.301] j-A [2025-09-24 11:37:33.672] The R5 Autosar Classic is running [2025-09-24 11:37:33.672] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:37:33.672] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:37:34.280] INIT: version 2.96 booting [2025-09-24 11:37:34.391] INIT: Entering runlevel: 5 [2025-09-24 11:37:34.535] mtd24 attached [2025-09-24 11:37:34.551] mtd32 attached [2025-09-24 11:37:34.567] mtd28 attached [2025-09-24 11:37:34.615] RTNETLINK answers: File exists [2025-09-24 11:37:34.615] ubi0:textures is mounted. [2025-09-24 11:37:34.677] ubi2:animations is mounted. [2025-09-24 11:37:34.677] ubi1:dml_code is mounted. [2025-09-24 11:37:34.677] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:37:34.677] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:37:34.677] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:37:34.677] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:37:34.677] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:37:34.677] data.LB_FadeInType0=100 [2025-09-24 11:37:34.677] data.CHLH_FadeInType0=0 [2025-09-24 11:37:34.677] data.WU_FadeInDelay=0 [2025-09-24 11:37:34.677] max_time_out=0 [2025-09-24 11:37:34.677] No splash screen [2025-09-24 11:37:34.677] stop dss Done [2025-09-24 11:37:34.724] /dev/mem opened. [2025-09-24 11:37:34.724] Memory mapped at address 0xffffbbace000. [2025-09-24 11:37:34.750] Read at address 0x00600018 (0xffffbbace018): 0x00000000 [2025-09-24 11:37:34.750] Write at address 0x00600018 (0xffffbbace018): 0x00400040, readback 0x00400040 [2025-09-24 11:37:34.750] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:37:34.766] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:37:35.006] Loaded PowerVR consumer services. [2025-09-24 11:37:35.054] Waiting data available... [2025-09-24 11:37:35.070] 512+0 records in [2025-09-24 11:37:35.070] 512+0 records out [2025-09-24 11:37:35.102] Starting syslogd/klogd: done [2025-09-24 11:37:35.118] DML Start [2025-09-24 11:37:35.278] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:37:35.502] DML res1: 0 [2025-09-24 11:37:35.943] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:37:35.943] Read Success [2025-09-24 11:37:35.943] Verifying certificate... [2025-09-24 11:37:36.167] Verified OK [2025-09-24 11:37:36.183] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:37:37.957] Verified OK [2025-09-24 11:37:37.957] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:37:38.511] Verified OK [2025-09-24 11:37:38.511] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:37:40.974] fs.protected_hardlinks = 1 [2025-09-24 11:37:40.974] fs.protected_symlinks = 1 [2025-09-24 11:37:40.989] kernel.modules_disabled = 1 [2025-09-24 11:37:41.181] [2025-09-24 11:37:41.181] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:37:42.610] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:37:50.263] SBL1:1210.0.1.0 [2025-09-24 11:37:50.311] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:37:51.877] SBL2:1210.0.1.0 [2025-09-24 11:37:51.925] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:37:52.037] j-A [2025-09-24 11:37:59.408] The R5 Autosar Classic is running [2025-09-24 11:37:59.408] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:37:59.408] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:38:00.016] INIT: version 2.96 booting [2025-09-24 11:38:00.127] INIT: Entering runlevel: 5 [2025-09-24 11:38:00.271] mtd24 attached [2025-09-24 11:38:00.287] mtd32 attached [2025-09-24 11:38:00.319] mtd28 attached [2025-09-24 11:38:00.319] ubi0:textures is mounted. [2025-09-24 11:38:00.351] RTNETLINK answers: File exists [2025-09-24 11:38:00.351] ubi1:dml_code is mounted. [2025-09-24 11:38:00.408] ubi2:animations is mounted. [2025-09-24 11:38:00.408] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:38:00.408] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:38:00.408] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:38:00.408] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:38:00.408] data.LB_FadeInType0=100 [2025-09-24 11:38:00.408] data.CHLH_FadeInType0=0 [2025-09-24 11:38:00.408] data.WU_FadeInDelay=0 [2025-09-24 11:38:00.408] max_time_out=0 [2025-09-24 11:38:00.408] No splash screen [2025-09-24 11:38:00.408] stop dss Done [2025-09-24 11:38:00.408] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:38:00.482] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:38:00.482] /dev/mem opened. [2025-09-24 11:38:00.482] Memory mapped at address 0xffff98581000. [2025-09-24 11:38:00.482] Read at address 0x00600018 (0xffff98581018): 0x00000000 [2025-09-24 11:38:00.482] Write at address 0x00600018 (0xffff98581018): 0x00400040, readback 0x00400040 [2025-09-24 11:38:00.482] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:38:00.577] Loaded PowerVR consumer services. [2025-09-24 11:38:00.765] Waiting data available... [2025-09-24 11:38:00.765] 512+0 records in [2025-09-24 11:38:00.765] 512+0 records out [2025-09-24 11:38:00.781] Starting syslogd/klogd: done [2025-09-24 11:38:00.797] DML Start [2025-09-24 11:38:00.941] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:38:01.149] DML res1: 0 [2025-09-24 11:38:01.661] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:38:01.682] Read Success [2025-09-24 11:38:01.682] Verifying certificate... [2025-09-24 11:38:01.954] Verified OK [2025-09-24 11:38:01.970] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:38:03.705] Verified OK [2025-09-24 11:38:03.705] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:38:04.322] Verified OK [2025-09-24 11:38:04.322] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:38:06.832] fs.protected_hardlinks = 1 [2025-09-24 11:38:06.848] fs.protected_symlinks = 1 [2025-09-24 11:38:06.848] kernel.modules_disabled = 1 [2025-09-24 11:38:07.056] [2025-09-24 11:38:07.056] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:38:08.202] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:38:15.998] SBL1:1210.0.1.0 [2025-09-24 11:38:16.046] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:38:17.629] SBL2:1210.0.1.0 [2025-09-24 11:38:17.661] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:38:17.772] j-A [2025-09-24 11:38:25.144] The R5 Autosar Classic is running [2025-09-24 11:38:25.144] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:38:25.144] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:38:25.751] INIT: version 2.96 booting [2025-09-24 11:38:25.862] INIT: Entering runlevel: 5 [2025-09-24 11:38:26.007] mtd28 attached [2025-09-24 11:38:26.023] mtd32 attached [2025-09-24 11:38:26.039] mtd24 attached [2025-09-24 11:38:26.086] ubi0:animations is mounted. [2025-09-24 11:38:26.086] RTNETLINK answers: File exists [2025-09-24 11:38:26.142] ubi1:dml_code is mounted. [2025-09-24 11:38:26.142] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:38:26.142] ubi2:textures is mounted. [2025-09-24 11:38:26.142] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:38:26.142] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:38:26.142] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:38:26.142] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:38:26.142] data.LB_FadeInType0=100 [2025-09-24 11:38:26.142] data.CHLH_FadeInType0=0 [2025-09-24 11:38:26.142] data.WU_FadeInDelay=0 [2025-09-24 11:38:26.142] max_time_out=0 [2025-09-24 11:38:26.142] No splash screen [2025-09-24 11:38:26.142] stop dss Done [2025-09-24 11:38:26.217] /dev/mem opened. [2025-09-24 11:38:26.217] Memory mapped at address 0xffff97d1a000. [2025-09-24 11:38:26.217] Read at address 0x00600018 (0xffff97d1a018): 0x00000000 [2025-09-24 11:38:26.217] Write at address 0x00600018 (0xffff97d1a018): 0x00400040, readback 0x00400040 [2025-09-24 11:38:26.217] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:38:26.217] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:38:26.440] Loaded PowerVR consumer services. [2025-09-24 11:38:26.473] Waiting data available... [2025-09-24 11:38:26.489] 512+0 records in [2025-09-24 11:38:26.505] 512+0 records out [2025-09-24 11:38:26.537] Starting syslogd/klogd: done [2025-09-24 11:38:26.553] DML Start [2025-09-24 11:38:26.760] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:38:26.984] DML res1: 0 [2025-09-24 11:38:27.413] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:38:27.413] Read Success [2025-09-24 11:38:27.413] Verifying certificate... [2025-09-24 11:38:27.652] Verified OK [2025-09-24 11:38:27.668] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:38:29.380] Verified OK [2025-09-24 11:38:29.380] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:38:29.930] Verified OK [2025-09-24 11:38:29.931] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:38:32.377] fs.protected_hardlinks = 1 [2025-09-24 11:38:32.377] fs.protected_symlinks = 1 [2025-09-24 11:38:32.393] kernel.modules_disabled = 1 [2025-09-24 11:38:32.584] [2025-09-24 11:38:32.584] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:38:34.022] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:38:41.740] SBL1:1210.0.1.0 [2025-09-24 11:38:41.772] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:38:43.356] SBL2:1210.0.1.0 [2025-09-24 11:38:43.403] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:38:43.499] j-A [2025-09-24 11:38:50.854] The R5 Autosar Classic is running [2025-09-24 11:38:50.875] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:38:50.875] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:38:51.483] INIT: version 2.96 booting [2025-09-24 11:38:51.595] INIT: Entering runlevel: 5 [2025-09-24 11:38:51.755] mtd28 attached [2025-09-24 11:38:51.755] mtd24 attached [2025-09-24 11:38:51.771] mtd32 attached [2025-09-24 11:38:51.802] ubi0:animations is mounted. [2025-09-24 11:38:51.818] RTNETLINK answers: File exists [2025-09-24 11:38:51.859] ubi1:textures is mounted. [2025-09-24 11:38:51.859] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:38:51.859] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:38:51.859] ubi2:dml_code is mounted. [2025-09-24 11:38:51.859] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:38:51.859] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:38:51.859] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:38:51.882] data.LB_FadeInType0=100 [2025-09-24 11:38:51.882] data.CHLH_FadeInType0=0 [2025-09-24 11:38:51.882] data.WU_FadeInDelay=0 [2025-09-24 11:38:51.882] max_time_out=0 [2025-09-24 11:38:51.882] No splash screen [2025-09-24 11:38:51.882] stop dss Done [2025-09-24 11:38:51.930] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:38:51.967] /dev/mem opened. [2025-09-24 11:38:51.967] Memory mapped at address 0xffff9f2bc000. [2025-09-24 11:38:51.967] Read at address 0x00600018 (0xffff9f2bc018): 0x00000000 [2025-09-24 11:38:51.967] Write at address 0x00600018 (0xffff9f2bc018): 0x00400040, readback 0x00400040 [2025-09-24 11:38:51.967] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:38:52.175] Loaded PowerVR consumer services. [2025-09-24 11:38:52.255] Waiting data available... [2025-09-24 11:38:52.271] 512+0 records in [2025-09-24 11:38:52.271] 512+0 records out [2025-09-24 11:38:52.303] Starting syslogd/klogd: done [2025-09-24 11:38:52.319] DML Start [2025-09-24 11:38:52.478] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:38:52.702] DML res1: 0 [2025-09-24 11:38:53.164] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:38:53.164] Read Success [2025-09-24 11:38:53.164] Verifying certificate... [2025-09-24 11:38:53.420] Verified OK [2025-09-24 11:38:53.435] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:38:55.002] Verified OK [2025-09-24 11:38:55.002] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:38:55.610] Verified OK [2025-09-24 11:38:55.626] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:38:58.296] fs.protected_hardlinks = 1 [2025-09-24 11:38:58.313] fs.protected_symlinks = 1 [2025-09-24 11:38:58.328] kernel.modules_disabled = 1 [2025-09-24 11:38:58.504] [2025-09-24 11:38:58.504] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:38:59.751] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:39:07.477] SBL1:1210.0.1.0 [2025-09-24 11:39:07.525] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:39:09.093] SBL2:1210.0.1.0 [2025-09-24 11:39:09.140] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:39:09.236] j-A [2025-09-24 11:39:16.592] The R5 Autosar Classic is running [2025-09-24 11:39:16.617] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:39:16.617] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:39:17.225] INIT: version 2.96 booting [2025-09-24 11:39:17.336] INIT: Entering runlevel: 5 [2025-09-24 11:39:17.496] mtd24 attached [2025-09-24 11:39:17.496] mtd32 attached [2025-09-24 11:39:17.512] mtd28 attached [2025-09-24 11:39:17.545] ubi0:textures is mounted. [2025-09-24 11:39:17.561] RTNETLINK answers: File exists [2025-09-24 11:39:17.615] ubi2:animations is mounted. [2025-09-24 11:39:17.615] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:39:17.615] ubi1:dml_code is mounted. [2025-09-24 11:39:17.615] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:39:17.615] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:39:17.615] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:39:17.615] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:39:17.615] data.LB_FadeInType0=100 [2025-09-24 11:39:17.615] data.CHLH_FadeInType0=0 [2025-09-24 11:39:17.615] data.WU_FadeInDelay=0 [2025-09-24 11:39:17.615] max_time_out=0 [2025-09-24 11:39:17.615] No splash screen [2025-09-24 11:39:17.615] stop dss Done [2025-09-24 11:39:17.700] /dev/mem opened. [2025-09-24 11:39:17.700] Memory mapped at address 0xffff88aed000. [2025-09-24 11:39:17.700] Read at address 0x00600018 (0xffff88aed018): 0x00000000 [2025-09-24 11:39:17.700] Write at address 0x00600018 (0xffff88aed018): 0x00400040, readback 0x00400040 [2025-09-24 11:39:17.700] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:39:17.717] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:39:17.956] Loaded PowerVR consumer services. [2025-09-24 11:39:18.009] 512+0 records in [2025-09-24 11:39:18.009] 512+0 records out [2025-09-24 11:39:18.009] Waiting data available... [2025-09-24 11:39:18.041] Starting syslogd/klogd: done [2025-09-24 11:39:18.057] DML Start [2025-09-24 11:39:18.249] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:39:18.457] DML res1: 0 [2025-09-24 11:39:18.916] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:39:18.916] Read Success [2025-09-24 11:39:18.916] Verifying certificate... [2025-09-24 11:39:19.140] Verified OK [2025-09-24 11:39:19.156] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:39:20.764] Verified OK [2025-09-24 11:39:20.764] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:39:21.336] Verified OK [2025-09-24 11:39:21.336] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:39:24.021] fs.protected_hardlinks = 1 [2025-09-24 11:39:24.021] fs.protected_symlinks = 1 [2025-09-24 11:39:24.037] kernel.modules_disabled = 1 [2025-09-24 11:39:24.229] [2025-09-24 11:39:24.229] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:39:25.537] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:39:33.217] SBL1:1210.0.1.0 [2025-09-24 11:39:33.265] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:39:34.831] SBL2:1210.0.1.0 [2025-09-24 11:39:34.879] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 11:39:34.976] j-A [2025-09-24 11:39:42.331] The R5 Autosar Classic is running [2025-09-24 11:39:42.353] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:39:42.353] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:39:42.961] INIT: version 2.96 booting [2025-09-24 11:39:43.072] INIT: Entering runlevel: 5 [2025-09-24 11:39:43.216] mtd24 attached [2025-09-24 11:39:43.232] mtd28 attached [2025-09-24 11:39:43.248] mtd32 attached [2025-09-24 11:39:43.264] ubi0:textures is mounted. [2025-09-24 11:39:43.296] ubi1:animations is mounted. [2025-09-24 11:39:43.296] RTNETLINK answers: File exists [2025-09-24 11:39:43.354] ubi2:dml_code is mounted. [2025-09-24 11:39:43.354] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:39:43.354] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:39:43.354] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:39:43.354] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:39:43.354] data.LB_FadeInType0=100 [2025-09-24 11:39:43.354] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:39:43.354] data.CHLH_FadeInType0=0 [2025-09-24 11:39:43.354] data.WU_FadeInDelay=0 [2025-09-24 11:39:43.354] max_time_out=0 [2025-09-24 11:39:43.354] No splash screen [2025-09-24 11:39:43.354] stop dss Done [2025-09-24 11:39:43.420] /dev/mem opened. [2025-09-24 11:39:43.420] Memory mapped at address 0xffffb6002000. [2025-09-24 11:39:43.420] Read at address 0x00600018 (0xffffb6002018): 0x00000000 [2025-09-24 11:39:43.420] Write at address 0x00600018 (0xffffb6002018): 0x00400040, readback 0x00400040 [2025-09-24 11:39:43.420] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:39:43.436] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:39:43.659] Loaded PowerVR consumer services. [2025-09-24 11:39:43.723] Waiting data available... [2025-09-24 11:39:43.739] 512+0 records in [2025-09-24 11:39:43.739] 512+0 records out [2025-09-24 11:39:43.787] Starting syslogd/klogd: done [2025-09-24 11:39:43.787] DML Start [2025-09-24 11:39:43.979] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:39:44.203] DML res1: 0 [2025-09-24 11:39:44.629] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:39:44.629] Read Success [2025-09-24 11:39:44.629] Verifying certificate... [2025-09-24 11:39:44.884] Verified OK [2025-09-24 11:39:44.900] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:39:46.595] Verified OK [2025-09-24 11:39:46.595] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:39:47.186] Verified OK [2025-09-24 11:39:47.186] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:39:49.696] fs.protected_hardlinks = 1 [2025-09-24 11:39:49.712] fs.protected_symlinks = 1 [2025-09-24 11:39:49.712] kernel.modules_disabled = 1 [2025-09-24 11:39:49.904] [2025-09-24 11:39:49.904] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:39:51.231] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:39:58.978] SBL1:1210.0.1.0 [2025-09-24 11:39:59.010] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:40:00.593] SBL2:1210.0.1.0 [2025-09-24 11:40:00.641] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 11:40:00.736] j-A [2025-09-24 11:40:08.093] The R5 Autosar Classic is running [2025-09-24 11:40:08.093] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:40:08.114] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:40:08.722] INIT: version 2.96 booting [2025-09-24 11:40:08.834] INIT: Entering runlevel: 5 [2025-09-24 11:40:08.993] mtd24 attached [2025-09-24 11:40:08.993] mtd28 attached [2025-09-24 11:40:09.009] mtd32 attached [2025-09-24 11:40:09.057] ubi0:textures is mounted. [2025-09-24 11:40:09.057] RTNETLINK answers: File exists [2025-09-24 11:40:09.099] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:40:09.099] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:40:09.099] ubi1:animations is mounted. [2025-09-24 11:40:09.099] ubi2:dml_code is mounted. [2025-09-24 11:40:09.099] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:40:09.099] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:40:09.099] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:40:09.123] data.LB_FadeInType0=100 [2025-09-24 11:40:09.123] data.CHLH_FadeInType0=0 [2025-09-24 11:40:09.123] data.WU_FadeInDelay=0 [2025-09-24 11:40:09.123] max_time_out=0 [2025-09-24 11:40:09.123] No splash screen [2025-09-24 11:40:09.123] stop dss Done [2025-09-24 11:40:09.168] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:40:09.168] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:40:09.207] /dev/mem opened. [2025-09-24 11:40:09.207] Memory mapped at address 0xffff909b9000. [2025-09-24 11:40:09.207] Read at address 0x00600018 (0xffff909b9018): 0x00000000 [2025-09-24 11:40:09.207] Write at address 0x00600018 (0xffff909b9018): 0x00400040, readback 0x00400040 [2025-09-24 11:40:09.302] Loaded PowerVR consumer services. [2025-09-24 11:40:09.462] Waiting data available... [2025-09-24 11:40:09.478] 512+0 records in [2025-09-24 11:40:09.478] 512+0 records out [2025-09-24 11:40:09.510] Starting syslogd/klogd: done [2025-09-24 11:40:09.526] DML Start [2025-09-24 11:40:09.669] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:40:09.910] DML res1: 0 [2025-09-24 11:40:10.400] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:40:10.400] Read Success [2025-09-24 11:40:10.400] Verifying certificate... [2025-09-24 11:40:10.672] Verified OK [2025-09-24 11:40:10.705] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:40:12.299] Verified OK [2025-09-24 11:40:12.299] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:40:12.921] Verified OK [2025-09-24 11:40:12.921] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:40:15.493] fs.protected_hardlinks = 1 [2025-09-24 11:40:15.493] fs.protected_symlinks = 1 [2025-09-24 11:40:15.493] kernel.modules_disabled = 1 [2025-09-24 11:40:15.669] [2025-09-24 11:40:15.669] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:40:16.951] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:40:24.714] SBL1:1210.0.1.0 [2025-09-24 11:40:24.762] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:40:26.328] SBL2:1210.0.1.0 [2025-09-24 11:40:26.376] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:40:26.473] j-A [2025-09-24 11:40:33.828] The R5 Autosar Classic is running [2025-09-24 11:40:33.852] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:40:33.852] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:40:34.459] INIT: version 2.96 booting [2025-09-24 11:40:34.571] INIT: Entering runlevel: 5 [2025-09-24 11:40:34.732] mtd24 attached [2025-09-24 11:40:34.732] mtd32 attached [2025-09-24 11:40:34.748] mtd28 attached [2025-09-24 11:40:34.796] RTNETLINK answers: File exists [2025-09-24 11:40:34.841] ubi0:textures is mounted. [2025-09-24 11:40:34.841] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:40:34.841] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:40:34.841] ubi1:dml_code is mounted. [2025-09-24 11:40:34.841] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:40:34.841] ubi2:animations is mounted. [2025-09-24 11:40:34.841] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:40:34.841] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:40:34.862] data.LB_FadeInType0=100 [2025-09-24 11:40:34.862] data.CHLH_FadeInType0=0 [2025-09-24 11:40:34.862] data.WU_FadeInDelay=0 [2025-09-24 11:40:34.862] max_time_out=0 [2025-09-24 11:40:34.862] No splash screen [2025-09-24 11:40:34.862] stop dss Done [2025-09-24 11:40:34.905] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:40:34.905] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:40:34.905] /dev/mem opened. [2025-09-24 11:40:34.905] Memory mapped at address 0xffff82a6b000. [2025-09-24 11:40:34.931] Read at address 0x00600018 (0xffff82a6b018): 0x00000000 [2025-09-24 11:40:34.931] Write at address 0x00600018 (0xffff82a6b018): 0x00400040, readback 0x00400040 [2025-09-24 11:40:35.187] Waiting data available... [2025-09-24 11:40:35.203] Loaded PowerVR consumer services. [2025-09-24 11:40:35.219] 512+0 records in [2025-09-24 11:40:35.219] 512+0 records out [2025-09-24 11:40:35.267] Starting syslogd/klogd: done [2025-09-24 11:40:35.283] DML Start [2025-09-24 11:40:35.475] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:40:35.699] DML res1: 0 [2025-09-24 11:40:36.147] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:40:36.163] Read Success [2025-09-24 11:40:36.163] Verifying certificate... [2025-09-24 11:40:36.451] Verified OK [2025-09-24 11:40:36.499] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:40:38.162] Verified OK [2025-09-24 11:40:38.178] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:40:38.673] Verified OK [2025-09-24 11:40:38.673] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:40:41.120] fs.protected_hardlinks = 1 [2025-09-24 11:40:41.136] fs.protected_symlinks = 1 [2025-09-24 11:40:41.136] kernel.modules_disabled = 1 [2025-09-24 11:40:41.327] [2025-09-24 11:40:41.327] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:40:42.706] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:40:50.473] SBL1:1210.0.1.0 [2025-09-24 11:40:50.521] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:40:52.088] SBL2:1210.0.1.0 [2025-09-24 11:40:52.136] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:40:52.247] j-A [2025-09-24 11:40:59.587] The R5 Autosar Classic is running [2025-09-24 11:40:59.612] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:40:59.612] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:41:00.219] INIT: version 2.96 booting [2025-09-24 11:41:00.332] INIT: Entering runlevel: 5 [2025-09-24 11:41:00.491] mtd24 attached [2025-09-24 11:41:00.508] mtd28 attached [2025-09-24 11:41:00.539] ubi0:textures is mounted. [2025-09-24 11:41:00.539] mtd32 attached [2025-09-24 11:41:00.539] ubi1:animations is mounted. [2025-09-24 11:41:00.622] RTNETLINK answers: File exists [2025-09-24 11:41:00.622] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:41:00.622] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:41:00.622] ubi2:dml_code is mounted. [2025-09-24 11:41:00.622] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:41:00.622] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:41:00.622] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:41:00.622] data.LB_FadeInType0=100 [2025-09-24 11:41:00.622] data.CHLH_FadeInType0=0 [2025-09-24 11:41:00.622] data.WU_FadeInDelay=0 [2025-09-24 11:41:00.622] max_time_out=0 [2025-09-24 11:41:00.622] No splash screen [2025-09-24 11:41:00.622] stop dss Done [2025-09-24 11:41:00.704] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:41:00.704] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:41:00.704] /dev/mem opened. [2025-09-24 11:41:00.704] Memory mapped at address 0xffff98e39000. [2025-09-24 11:41:00.704] Read at address 0x00600018 (0xffff98e39018): 0x00000000 [2025-09-24 11:41:00.704] Write at address 0x00600018 (0xffff98e39018): 0x00400040, readback 0x00400040 [2025-09-24 11:41:00.863] Loaded PowerVR consumer services. [2025-09-24 11:41:00.959] Waiting data available... [2025-09-24 11:41:00.975] 512+0 records in [2025-09-24 11:41:00.991] 512+0 records out [2025-09-24 11:41:01.039] Starting syslogd/klogd: done [2025-09-24 11:41:01.055] DML Start [2025-09-24 11:41:01.199] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:41:01.407] DML res1: 0 [2025-09-24 11:41:01.935] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:41:01.956] Read Success [2025-09-24 11:41:01.956] Verifying certificate... [2025-09-24 11:41:02.212] Verified OK [2025-09-24 11:41:02.244] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:41:03.740] Verified OK [2025-09-24 11:41:03.740] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:41:04.316] Verified OK [2025-09-24 11:41:04.337] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:41:07.136] fs.protected_hardlinks = 1 [2025-09-24 11:41:07.152] fs.protected_symlinks = 1 [2025-09-24 11:41:07.152] kernel.modules_disabled = 1 [2025-09-24 11:41:07.343] [2025-09-24 11:41:07.343] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:41:08.470] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:41:16.229] SBL1:1210.0.1.0 [2025-09-24 11:41:16.261] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:41:17.844] SBL2:1210.0.1.0 [2025-09-24 11:41:17.876] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:41:17.987] j-A [2025-09-24 11:41:25.361] The R5 Autosar Classic is running [2025-09-24 11:41:25.361] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:41:25.361] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:41:25.968] INIT: version 2.96 booting [2025-09-24 11:41:26.080] INIT: Entering runlevel: 5 [2025-09-24 11:41:26.240] mtd32 attached [2025-09-24 11:41:26.240] mtd28 attached [2025-09-24 11:41:26.256] mtd24 attached [2025-09-24 11:41:26.304] RTNETLINK answers: File exists [2025-09-24 11:41:26.368] ubi0:dml_code is mounted. [2025-09-24 11:41:26.368] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:41:26.368] ubi1:animations is mounted. [2025-09-24 11:41:26.368] ubi2:textures is mounted. [2025-09-24 11:41:26.368] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:41:26.368] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:41:26.368] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:41:26.368] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:41:26.368] data.LB_FadeInType0=100 [2025-09-24 11:41:26.368] data.CHLH_FadeInType0=0 [2025-09-24 11:41:26.368] data.WU_FadeInDelay=0 [2025-09-24 11:41:26.368] max_time_out=0 [2025-09-24 11:41:26.368] No splash screen [2025-09-24 11:41:26.368] stop dss Done [2025-09-24 11:41:26.416] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:41:26.451] /dev/mem opened. [2025-09-24 11:41:26.451] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:41:26.451] Memory mapped at address 0xffff81cf2000. [2025-09-24 11:41:26.451] Read at address 0x00600018 (0xffff81cf2018): 0x00000000 [2025-09-24 11:41:26.451] Write at address 0x00600018 (0xffff81cf2018): 0x00400040, readback 0x00400040 [2025-09-24 11:41:26.659] Loaded PowerVR consumer services. [2025-09-24 11:41:26.707] Waiting data available... [2025-09-24 11:41:26.723] 512+0 records in [2025-09-24 11:41:26.723] 512+0 records out [2025-09-24 11:41:26.739] Starting syslogd/klogd: done [2025-09-24 11:41:26.755] DML Start [2025-09-24 11:41:26.947] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:41:27.171] DML res1: 0 [2025-09-24 11:41:27.569] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:41:27.569] Read Success [2025-09-24 11:41:27.569] Verifying certificate... [2025-09-24 11:41:27.825] Verified OK [2025-09-24 11:41:27.841] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:41:29.526] Verified OK [2025-09-24 11:41:29.526] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:41:30.124] Verified OK [2025-09-24 11:41:30.124] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:41:32.811] fs.protected_hardlinks = 1 [2025-09-24 11:41:32.826] fs.protected_symlinks = 1 [2025-09-24 11:41:32.826] kernel.modules_disabled = 1 [2025-09-24 11:41:33.019] [2025-09-24 11:41:33.019] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:41:34.225] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:41:41.974] SBL1:1210.0.1.0 [2025-09-24 11:41:42.006] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:41:43.589] SBL2:1210.0.1.0 [2025-09-24 11:41:43.620] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:41:43.733] j-A [2025-09-24 11:41:51.108] The R5 Autosar Classic is running [2025-09-24 11:41:51.108] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:41:51.108] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:41:51.716] INIT: version 2.96 booting [2025-09-24 11:41:51.812] INIT: Entering runlevel: 5 [2025-09-24 11:41:51.972] mtd24 attached [2025-09-24 11:41:51.988] mtd32 attached [2025-09-24 11:41:51.988] mtd28 attached [2025-09-24 11:41:52.084] RTNETLINK answers: File exists [2025-09-24 11:41:52.084] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:41:52.084] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:41:52.084] ubi0:textures is mounted. [2025-09-24 11:41:52.084] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:41:52.084] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:41:52.084] ubi2:animations is mounted. [2025-09-24 11:41:52.084] ubi1:dml_code is mounted. [2025-09-24 11:41:52.084] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:41:52.113] data.LB_FadeInType0=100 [2025-09-24 11:41:52.113] data.CHLH_FadeInType0=0 [2025-09-24 11:41:52.113] data.WU_FadeInDelay=0 [2025-09-24 11:41:52.113] max_time_out=0 [2025-09-24 11:41:52.113] No splash screen [2025-09-24 11:41:52.113] stop dss Done [2025-09-24 11:41:52.142] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:41:52.142] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:41:52.197] /dev/mem opened. [2025-09-24 11:41:52.197] Memory mapped at address 0xffff85700000. [2025-09-24 11:41:52.197] Read at address 0x00600018 (0xffff85700018): 0x00000000 [2025-09-24 11:41:52.197] Write at address 0x00600018 (0xffff85700018): 0x00400040, readback 0x00400040 [2025-09-24 11:41:52.421] Loaded PowerVR consumer services. [2025-09-24 11:41:52.421] Waiting data available... [2025-09-24 11:41:52.469] 512+0 records in [2025-09-24 11:41:52.469] 512+0 records out [2025-09-24 11:41:52.501] Starting syslogd/klogd: done [2025-09-24 11:41:52.517] DML Start [2025-09-24 11:41:52.660] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:41:52.901] DML res1: 0 [2025-09-24 11:41:53.402] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:41:53.402] Read Success [2025-09-24 11:41:53.402] Verifying certificate... [2025-09-24 11:41:53.673] Verified OK [2025-09-24 11:41:53.689] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:41:55.384] Verified OK [2025-09-24 11:41:55.384] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:41:55.952] Verified OK [2025-09-24 11:41:55.952] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:41:58.398] fs.protected_hardlinks = 1 [2025-09-24 11:41:58.425] fs.protected_symlinks = 1 [2025-09-24 11:41:58.425] kernel.modules_disabled = 1 [2025-09-24 11:41:58.618] [2025-09-24 11:41:58.618] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:41:59.961] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:42:07.735] SBL1:1210.0.1.0 [2025-09-24 11:42:07.767] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:42:09.351] SBL2:1210.0.1.0 [2025-09-24 11:42:09.398] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:42:09.494] j-A [2025-09-24 11:42:16.849] The R5 Autosar Classic is running [2025-09-24 11:42:16.849] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:42:16.870] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:42:17.477] INIT: version 2.96 booting [2025-09-24 11:42:17.589] INIT: Entering runlevel: 5 [2025-09-24 11:42:17.734] mtd24 attached [2025-09-24 11:42:17.750] mtd28 attached [2025-09-24 11:42:17.781] mtd32 attached [2025-09-24 11:42:17.781] ubi0:textures is mounted. [2025-09-24 11:42:17.813] ubi1:animations is mounted. [2025-09-24 11:42:17.873] RTNETLINK answers: File exists [2025-09-24 11:42:17.873] ubi2:dml_code is mounted. [2025-09-24 11:42:17.873] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:42:17.873] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:42:17.873] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:42:17.873] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:42:17.873] data.LB_FadeInType0=100 [2025-09-24 11:42:17.873] data.CHLH_FadeInType0=0 [2025-09-24 11:42:17.873] data.WU_FadeInDelay=0 [2025-09-24 11:42:17.873] max_time_out=0 [2025-09-24 11:42:17.873] No splash screen [2025-09-24 11:42:17.873] stop dss Done [2025-09-24 11:42:17.873] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:42:17.927] /dev/mem opened. [2025-09-24 11:42:17.927] Memory mapped at address 0xffff839eb000. [2025-09-24 11:42:17.927] Read at address 0x00600018 (0xffff839eb018): 0x00000000 [2025-09-24 11:42:17.927] Write at address 0x00600018 (0xffff839eb018): 0x00400040, readback 0x00400040 [2025-09-24 11:42:17.959] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:42:17.975] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:42:18.103] Loaded PowerVR consumer services. [2025-09-24 11:42:18.215] Waiting data available... [2025-09-24 11:42:18.247] 512+0 records in [2025-09-24 11:42:18.247] 512+0 records out [2025-09-24 11:42:18.263] Starting syslogd/klogd: done [2025-09-24 11:42:18.295] DML Start [2025-09-24 11:42:18.423] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:42:18.631] DML res1: 0 [2025-09-24 11:42:19.134] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:42:19.134] Read Success [2025-09-24 11:42:19.134] Verifying certificate... [2025-09-24 11:42:19.406] Verified OK [2025-09-24 11:42:19.422] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:42:21.194] Verified OK [2025-09-24 11:42:21.194] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:42:21.648] Verified OK [2025-09-24 11:42:21.648] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:42:24.030] fs.protected_hardlinks = 1 [2025-09-24 11:42:24.030] fs.protected_symlinks = 1 [2025-09-24 11:42:24.046] kernel.modules_disabled = 1 [2025-09-24 11:42:24.223] [2025-09-24 11:42:24.223] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:42:25.710] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:42:33.489] SBL1:1210.0.1.0 [2025-09-24 11:42:33.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:42:35.105] SBL2:1210.0.1.0 [2025-09-24 11:42:35.152] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 11:42:35.264] j-A [2025-09-24 11:42:42.604] The R5 Autosar Classic is running [2025-09-24 11:42:42.629] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:42:42.629] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:42:43.236] INIT: version 2.96 booting [2025-09-24 11:42:43.348] INIT: Entering runlevel: 5 [2025-09-24 11:42:43.508] mtd28 attached [2025-09-24 11:42:43.508] mtd24 attached [2025-09-24 11:42:43.524] mtd32 attached [2025-09-24 11:42:43.572] RTNETLINK answers: File exists [2025-09-24 11:42:43.644] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:42:43.644] ubi0:animations is mounted. [2025-09-24 11:42:43.644] ubi2:dml_code is mounted. [2025-09-24 11:42:43.644] ubi1:textures is mounted. [2025-09-24 11:42:43.644] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:42:43.644] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:42:43.644] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:42:43.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:42:43.644] data.LB_FadeInType0=100 [2025-09-24 11:42:43.644] data.CHLH_FadeInType0=0 [2025-09-24 11:42:43.644] data.WU_FadeInDelay=0 [2025-09-24 11:42:43.644] max_time_out=0 [2025-09-24 11:42:43.644] No splash screen [2025-09-24 11:42:43.644] stop dss Done [2025-09-24 11:42:43.692] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:42:43.730] /dev/mem opened. [2025-09-24 11:42:43.730] Memory mapped at address 0xffffb823b000. [2025-09-24 11:42:43.730] Read at address 0x00600018 (0xffffb823b018): 0x00000000 [2025-09-24 11:42:43.730] Write at address 0x00600018 (0xffffb823b018): 0x00400040, readback 0x00400040 [2025-09-24 11:42:43.730] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:42:43.874] Loaded PowerVR consumer services. [2025-09-24 11:42:44.002] Waiting data available... [2025-09-24 11:42:44.002] 512+0 records in [2025-09-24 11:42:44.002] 512+0 records out [2025-09-24 11:42:44.034] Starting syslogd/klogd: done [2025-09-24 11:42:44.050] DML Start [2025-09-24 11:42:44.241] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:42:44.497] DML res1: 0 [2025-09-24 11:42:44.845] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:42:44.845] Read Success [2025-09-24 11:42:44.845] Verifying certificate... [2025-09-24 11:42:45.069] Verified OK [2025-09-24 11:42:45.085] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:42:46.754] Verified OK [2025-09-24 11:42:46.754] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:42:47.372] Verified OK [2025-09-24 11:42:47.372] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:42:49.978] fs.protected_hardlinks = 1 [2025-09-24 11:42:49.978] fs.protected_symlinks = 1 [2025-09-24 11:42:49.994] kernel.modules_disabled = 1 [2025-09-24 11:42:50.186] [2025-09-24 11:42:50.186] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:42:51.545] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:42:59.215] SBL1:1210.0.1.0 [2025-09-24 11:42:59.263] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 11:43:00.830] SBL2:1210.0.1.0 [2025-09-24 11:43:00.878] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:43:00.990] j-A [2025-09-24 11:43:08.328] The R5 Autosar Classic is running [2025-09-24 11:43:08.359] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:43:08.359] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:43:08.967] INIT: version 2.96 booting [2025-09-24 11:43:09.079] INIT: Entering runlevel: 5 [2025-09-24 11:43:09.222] mtd28 attached [2025-09-24 11:43:09.238] mtd32 attached [2025-09-24 11:43:09.254] mtd24 attached [2025-09-24 11:43:09.303] RTNETLINK answers: File exists [2025-09-24 11:43:09.303] ubi0:animations is mounted. [2025-09-24 11:43:09.341] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:43:09.341] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:43:09.341] ubi1:dml_code is mounted. [2025-09-24 11:43:09.341] ubi2:textures is mounted. [2025-09-24 11:43:09.341] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:43:09.341] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:43:09.341] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:43:09.363] data.LB_FadeInType0=100 [2025-09-24 11:43:09.363] data.CHLH_FadeInType0=0 [2025-09-24 11:43:09.363] data.WU_FadeInDelay=0 [2025-09-24 11:43:09.363] max_time_out=0 [2025-09-24 11:43:09.363] No splash screen [2025-09-24 11:43:09.363] stop dss Done [2025-09-24 11:43:09.448] /dev/mem opened. [2025-09-24 11:43:09.448] Memory mapped at address 0xffff976ad000. [2025-09-24 11:43:09.448] Read at address 0x00600018 (0xffff976ad018): 0x00000000 [2025-09-24 11:43:09.448] Write at address 0x00600018 (0xffff976ad018): 0x00400040, readback 0x00400040 [2025-09-24 11:43:09.448] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:43:09.448] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:43:09.608] Loaded PowerVR consumer services. [2025-09-24 11:43:09.704] Waiting data available... [2025-09-24 11:43:09.721] 512+0 records in [2025-09-24 11:43:09.721] 512+0 records out [2025-09-24 11:43:09.768] Starting syslogd/klogd: done [2025-09-24 11:43:09.784] DML Start [2025-09-24 11:43:09.928] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:43:10.135] DML res1: 0 [2025-09-24 11:43:10.616] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:43:10.616] Read Success [2025-09-24 11:43:10.632] Verifying certificate... [2025-09-24 11:43:10.856] Verified OK [2025-09-24 11:43:10.887] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:43:12.693] Verified OK [2025-09-24 11:43:12.709] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:43:13.190] Verified OK [2025-09-24 11:43:13.190] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:43:15.652] fs.protected_hardlinks = 1 [2025-09-24 11:43:15.652] fs.protected_symlinks = 1 [2025-09-24 11:43:15.668] kernel.modules_disabled = 1 [2025-09-24 11:43:15.892] [2025-09-24 11:43:15.892] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:43:17.226] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:43:24.979] SBL1:1210.0.1.0 [2025-09-24 11:43:25.010] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:43:26.594] SBL2:1210.0.1.0 [2025-09-24 11:43:26.625] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:43:26.737] j-A [2025-09-24 11:43:34.112] The R5 Autosar Classic is running [2025-09-24 11:43:34.112] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:43:34.112] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:43:34.720] INIT: version 2.96 booting [2025-09-24 11:43:34.831] INIT: Entering runlevel: 5 [2025-09-24 11:43:34.975] mtd28 attached [2025-09-24 11:43:34.991] mtd24 attached [2025-09-24 11:43:35.007] mtd32 attached [2025-09-24 11:43:35.039] ubi0:animations is mounted. [2025-09-24 11:43:35.055] ubi1:textures is mounted. [2025-09-24 11:43:35.055] RTNETLINK answers: File exists [2025-09-24 11:43:35.110] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:43:35.110] ubi2:dml_code is mounted. [2025-09-24 11:43:35.110] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:43:35.110] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:43:35.110] data.LB_FadeInType0=100 [2025-09-24 11:43:35.110] data.CHLH_FadeInType0=0 [2025-09-24 11:43:35.110] data.WU_FadeInDelay=0 [2025-09-24 11:43:35.110] max_time_out=0 [2025-09-24 11:43:35.110] No splash screen [2025-09-24 11:43:35.110] stop dss Done [2025-09-24 11:43:35.110] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:43:35.110] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:43:35.157] /dev/mem opened. [2025-09-24 11:43:35.189] Memory mapped at address 0xffff8b6e1000. [2025-09-24 11:43:35.189] Read at address 0x00600018 (0xffff8b6e1018): 0x00000000 [2025-09-24 11:43:35.189] Write at address 0x00600018 (0xffff8b6e1018): 0x00400040, readback 0x00400040 [2025-09-24 11:43:35.205] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:43:35.221] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:43:35.333] Loaded PowerVR consumer services. [2025-09-24 11:43:35.446] Waiting data available... [2025-09-24 11:43:35.462] 512+0 records in [2025-09-24 11:43:35.462] 512+0 records out [2025-09-24 11:43:35.510] Starting syslogd/klogd: done [2025-09-24 11:43:35.525] DML Start [2025-09-24 11:43:35.701] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:43:35.942] DML res1: 0 [2025-09-24 11:43:36.333] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:43:36.333] Read Success [2025-09-24 11:43:36.333] Verifying certificate... [2025-09-24 11:43:36.620] Verified OK [2025-09-24 11:43:36.636] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:43:38.203] Verified OK [2025-09-24 11:43:38.219] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:43:38.880] Verified OK [2025-09-24 11:43:38.880] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:43:41.564] fs.protected_hardlinks = 1 [2025-09-24 11:43:41.564] fs.protected_symlinks = 1 [2025-09-24 11:43:41.564] kernel.modules_disabled = 1 [2025-09-24 11:43:41.756] [2025-09-24 11:43:41.756] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:43:42.996] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:43:50.729] SBL1:1210.0.1.0 [2025-09-24 11:43:50.777] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:43:52.343] SBL2:1210.0.1.0 [2025-09-24 11:43:52.391] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:43:52.487] j-A [2025-09-24 11:43:59.842] The R5 Autosar Classic is running [2025-09-24 11:43:59.864] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:43:59.864] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:44:00.472] INIT: version 2.96 booting [2025-09-24 11:44:00.584] INIT: Entering runlevel: 5 [2025-09-24 11:44:00.744] mtd28 attached [2025-09-24 11:44:00.760] mtd32 attached [2025-09-24 11:44:00.776] mtd24 attached [2025-09-24 11:44:00.808] ubi0:animations is mounted. [2025-09-24 11:44:00.824] RTNETLINK answers: File exists [2025-09-24 11:44:00.873] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:44:00.873] ubi2:textures is mounted. [2025-09-24 11:44:00.873] ubi1:dml_code is mounted. [2025-09-24 11:44:00.873] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:44:00.873] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:44:00.873] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:44:00.873] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:44:00.873] data.LB_FadeInType0=100 [2025-09-24 11:44:00.873] data.CHLH_FadeInType0=0 [2025-09-24 11:44:00.873] data.WU_FadeInDelay=0 [2025-09-24 11:44:00.873] max_time_out=0 [2025-09-24 11:44:00.873] No splash screen [2025-09-24 11:44:00.873] stop dss Done [2025-09-24 11:44:00.921] /dev/mem opened. [2025-09-24 11:44:00.921] Memory mapped at address 0xffffbc381000. [2025-09-24 11:44:00.961] Read at address 0x00600018 (0xffffbc381018): 0x00000000 [2025-09-24 11:44:00.961] Write at address 0x00600018 (0xffffbc381018): 0x00400040, readback 0x00400040 [2025-09-24 11:44:00.961] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:44:00.961] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:44:01.186] Loaded PowerVR consumer services. [2025-09-24 11:44:01.217] Waiting data available... [2025-09-24 11:44:01.249] 512+0 records in [2025-09-24 11:44:01.249] 512+0 records out [2025-09-24 11:44:01.297] Starting syslogd/klogd: done [2025-09-24 11:44:01.313] DML Start [2025-09-24 11:44:01.473] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:44:01.665] DML res1: 0 [2025-09-24 11:44:02.229] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:44:02.229] Read Success [2025-09-24 11:44:02.229] Verifying certificate... [2025-09-24 11:44:02.469] Verified OK [2025-09-24 11:44:02.517] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:44:04.148] Verified OK [2025-09-24 11:44:04.148] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:44:04.765] Verified OK [2025-09-24 11:44:04.765] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:44:07.387] fs.protected_hardlinks = 1 [2025-09-24 11:44:07.387] fs.protected_symlinks = 1 [2025-09-24 11:44:07.403] kernel.modules_disabled = 1 [2025-09-24 11:44:07.596] [2025-09-24 11:44:07.596] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:44:08.767] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:44:16.476] SBL1:1210.0.1.0 [2025-09-24 11:44:16.524] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:44:18.091] SBL2:1210.0.1.0 [2025-09-24 11:44:18.139] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:44:18.251] j-A [2025-09-24 11:44:25.622] The R5 Autosar Classic is running [2025-09-24 11:44:25.622] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:44:25.622] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:44:26.230] INIT: version 2.96 booting [2025-09-24 11:44:26.343] INIT: Entering runlevel: 5 [2025-09-24 11:44:26.487] mtd24 attached [2025-09-24 11:44:26.503] mtd28 attached [2025-09-24 11:44:26.519] mtd32 attached [2025-09-24 11:44:26.534] ubi0:textures is mounted. [2025-09-24 11:44:26.566] ubi1:animations is mounted. [2025-09-24 11:44:26.566] RTNETLINK answers: File exists [2025-09-24 11:44:26.624] ubi2:dml_code is mounted. [2025-09-24 11:44:26.624] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:44:26.624] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:44:26.624] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:44:26.624] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:44:26.624] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:44:26.624] data.LB_FadeInType0=100 [2025-09-24 11:44:26.624] data.CHLH_FadeInType0=0 [2025-09-24 11:44:26.624] data.WU_FadeInDelay=0 [2025-09-24 11:44:26.624] max_time_out=0 [2025-09-24 11:44:26.624] No splash screen [2025-09-24 11:44:26.624] stop dss Done [2025-09-24 11:44:26.672] /dev/mem opened. [2025-09-24 11:44:26.672] Memory mapped at address 0xffffb8c16000. [2025-09-24 11:44:26.704] Read at address 0x00600018 (0xffffb8c16018): 0x00000000 [2025-09-24 11:44:26.704] Write at address 0x00600018 (0xffffb8c16018): 0x00400040, readback 0x00400040 [2025-09-24 11:44:26.704] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:44:26.704] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:44:26.944] Loaded PowerVR consumer services. [2025-09-24 11:44:26.960] Waiting data available... [2025-09-24 11:44:26.991] 512+0 records in [2025-09-24 11:44:26.991] 512+0 records out [2025-09-24 11:44:27.024] Starting syslogd/klogd: done [2025-09-24 11:44:27.039] DML Start [2025-09-24 11:44:27.216] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:44:27.392] DML res1: 0 [2025-09-24 11:44:27.950] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:44:27.950] Read Success [2025-09-24 11:44:27.950] Verifying certificate... [2025-09-24 11:44:28.173] Verified OK [2025-09-24 11:44:28.189] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:44:29.738] Verified OK [2025-09-24 11:44:29.738] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:44:30.409] Verified OK [2025-09-24 11:44:30.409] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:44:33.079] fs.protected_hardlinks = 1 [2025-09-24 11:44:33.079] fs.protected_symlinks = 1 [2025-09-24 11:44:33.095] kernel.modules_disabled = 1 [2025-09-24 11:44:33.303] [2025-09-24 11:44:33.303] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:44:34.451] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:44:42.221] SBL1:1210.0.1.0 [2025-09-24 11:44:42.269] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:44:43.836] SBL2:1210.0.1.0 [2025-09-24 11:44:43.884] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:44:43.996] j-A [2025-09-24 11:44:51.367] The R5 Autosar Classic is running [2025-09-24 11:44:51.367] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:44:51.367] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:44:51.976] INIT: version 2.96 booting [2025-09-24 11:44:52.087] INIT: Entering runlevel: 5 [2025-09-24 11:44:52.247] mtd32 attached [2025-09-24 11:44:52.247] mtd24 attached [2025-09-24 11:44:52.263] mtd28 attached [2025-09-24 11:44:52.310] RTNETLINK answers: File exists [2025-09-24 11:44:52.356] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:44:52.356] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:44:52.356] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:44:52.356] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:44:52.356] ubi1:textures is mounted. [2025-09-24 11:44:52.356] ubi0:dml_code is mounted. [2025-09-24 11:44:52.356] ubi2:animations is mounted. [2025-09-24 11:44:52.356] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:44:52.385] data.LB_FadeInType0=100 [2025-09-24 11:44:52.385] data.CHLH_FadeInType0=0 [2025-09-24 11:44:52.385] data.WU_FadeInDelay=0 [2025-09-24 11:44:52.385] max_time_out=0 [2025-09-24 11:44:52.385] No splash screen [2025-09-24 11:44:52.385] stop dss Done [2025-09-24 11:44:52.411] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:44:52.411] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:44:52.427] /dev/mem opened. [2025-09-24 11:44:52.427] Memory mapped at address 0xffff81897000. [2025-09-24 11:44:52.453] Read at address 0x00600018 (0xffff81897018): 0x00000000 [2025-09-24 11:44:52.453] Write at address 0x00600018 (0xffff81897018): 0x00400040, readback 0x00400040 [2025-09-24 11:44:52.548] Loaded PowerVR consumer services. [2025-09-24 11:44:52.709] Waiting data available... [2025-09-24 11:44:52.725] 512+0 records in [2025-09-24 11:44:52.725] 512+0 records out [2025-09-24 11:44:52.741] Starting syslogd/klogd: done [2025-09-24 11:44:52.773] DML Start [2025-09-24 11:44:52.997] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:44:53.172] DML res1: 0 [2025-09-24 11:44:53.525] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:44:53.525] Read Success [2025-09-24 11:44:53.540] Verifying certificate... [2025-09-24 11:44:53.764] Verified OK [2025-09-24 11:44:53.780] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:44:55.421] Verified OK [2025-09-24 11:44:55.421] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:44:55.989] Verified OK [2025-09-24 11:44:55.989] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:44:58.738] fs.protected_hardlinks = 1 [2025-09-24 11:44:58.754] fs.protected_symlinks = 1 [2025-09-24 11:44:58.754] kernel.modules_disabled = 1 [2025-09-24 11:44:58.946] [2025-09-24 11:44:58.946] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:45:00.236] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:45:07.973] SBL1:1210.0.1.0 [2025-09-24 11:45:08.005] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:45:09.588] SBL2:1210.0.1.0 [2025-09-24 11:45:09.636] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:45:09.732] j-A [2025-09-24 11:45:17.088] The R5 Autosar Classic is running [2025-09-24 11:45:17.088] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:45:17.109] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:45:17.717] INIT: version 2.96 booting [2025-09-24 11:45:17.829] INIT: Entering runlevel: 5 [2025-09-24 11:45:17.989] mtd32 attached [2025-09-24 11:45:17.990] mtd28 attached [2025-09-24 11:45:18.005] mtd24 attached [2025-09-24 11:45:18.053] ubi0:dml_code is mounted. [2025-09-24 11:45:18.053] RTNETLINK answers: File exists [2025-09-24 11:45:18.095] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:45:18.095] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:45:18.095] ubi1:animations is mounted. [2025-09-24 11:45:18.095] ubi2:textures is mounted. [2025-09-24 11:45:18.095] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:45:18.095] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:45:18.095] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:45:18.116] data.LB_FadeInType0=100 [2025-09-24 11:45:18.116] data.CHLH_FadeInType0=0 [2025-09-24 11:45:18.116] data.WU_FadeInDelay=0 [2025-09-24 11:45:18.116] max_time_out=0 [2025-09-24 11:45:18.116] No splash screen [2025-09-24 11:45:18.116] stop dss Done [2025-09-24 11:45:18.164] /dev/mem opened. [2025-09-24 11:45:18.196] Memory mapped at address 0xffff906c7000. [2025-09-24 11:45:18.196] Read at address 0x00600018 (0xffff906c7018): 0x00000000 [2025-09-24 11:45:18.196] Write at address 0x00600018 (0xffff906c7018): 0x00400040, readback 0x00400040 [2025-09-24 11:45:18.196] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:45:18.212] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:45:18.324] Loaded PowerVR consumer services. [2025-09-24 11:45:18.481] Waiting data available... [2025-09-24 11:45:18.481] 512+0 records in [2025-09-24 11:45:18.481] 512+0 records out [2025-09-24 11:45:18.529] Starting syslogd/klogd: done [2025-09-24 11:45:18.529] DML Start [2025-09-24 11:45:18.704] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:45:18.960] DML res1: 0 [2025-09-24 11:45:19.339] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:45:19.339] Read Success [2025-09-24 11:45:19.339] Verifying certificate... [2025-09-24 11:45:19.548] Verified OK [2025-09-24 11:45:19.564] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:45:21.125] Verified OK [2025-09-24 11:45:21.125] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:45:21.813] Verified OK [2025-09-24 11:45:21.813] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:45:24.483] fs.protected_hardlinks = 1 [2025-09-24 11:45:24.483] fs.protected_symlinks = 1 [2025-09-24 11:45:24.499] kernel.modules_disabled = 1 [2025-09-24 11:45:24.675] [2025-09-24 11:45:24.675] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:45:26.032] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:45:33.724] SBL1:1210.0.1.0 [2025-09-24 11:45:33.756] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:45:35.339] SBL2:1210.0.1.0 [2025-09-24 11:45:35.371] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:45:35.483] j-A [2025-09-24 11:45:42.857] The R5 Autosar Classic is running [2025-09-24 11:45:42.857] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:45:42.857] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:45:43.448] INIT: version 2.96 booting [2025-09-24 11:45:43.560] INIT: Entering runlevel: 5 [2025-09-24 11:45:43.720] mtd24 attached [2025-09-24 11:45:43.736] mtd28 attached [2025-09-24 11:45:43.752] ubi0:textures is mounted. [2025-09-24 11:45:43.768] ubi1:animations is mounted. [2025-09-24 11:45:43.784] mtd32 attached [2025-09-24 11:45:43.800] RTNETLINK answers: File exists [2025-09-24 11:45:43.857] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:45:43.857] ubi2:dml_code is mounted. [2025-09-24 11:45:43.857] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:45:43.857] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:45:43.857] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:45:43.857] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:45:43.857] data.LB_FadeInType0=100 [2025-09-24 11:45:43.857] data.CHLH_FadeInType0=0 [2025-09-24 11:45:43.857] data.WU_FadeInDelay=0 [2025-09-24 11:45:43.857] max_time_out=0 [2025-09-24 11:45:43.857] No splash screen [2025-09-24 11:45:43.857] stop dss Done [2025-09-24 11:45:43.906] /dev/mem opened. [2025-09-24 11:45:43.948] Memory mapped at address 0xffff9488e000. [2025-09-24 11:45:43.948] Read at address 0x00600018 (0xffff9488e018): 0x00000000 [2025-09-24 11:45:43.948] Write at address 0x00600018 (0xffff9488e018): 0x00400040, readback 0x00400040 [2025-09-24 11:45:43.948] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:45:43.948] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:45:44.123] Loaded PowerVR consumer services. [2025-09-24 11:45:44.203] Waiting data available... [2025-09-24 11:45:44.235] 512+0 records in [2025-09-24 11:45:44.235] 512+0 records out [2025-09-24 11:45:44.267] Starting syslogd/klogd: done [2025-09-24 11:45:44.283] DML Start [2025-09-24 11:45:44.443] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:45:44.699] DML res1: 0 [2025-09-24 11:45:45.112] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:45:45.112] Read Success [2025-09-24 11:45:45.112] Verifying certificate... [2025-09-24 11:45:45.352] Verified OK [2025-09-24 11:45:45.352] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:45:46.932] Verified OK [2025-09-24 11:45:46.932] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:45:47.514] Verified OK [2025-09-24 11:45:47.514] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:45:50.227] fs.protected_hardlinks = 1 [2025-09-24 11:45:50.227] fs.protected_symlinks = 1 [2025-09-24 11:45:50.227] kernel.modules_disabled = 1 [2025-09-24 11:45:50.403] [2025-09-24 11:45:50.403] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:45:51.701] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:45:59.457] SBL1:1210.0.1.0 [2025-09-24 11:45:59.505] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:46:01.071] SBL2:1210.0.1.0 [2025-09-24 11:46:01.119] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:46:01.216] j-A [2025-09-24 11:46:08.571] The R5 Autosar Classic is running [2025-09-24 11:46:08.571] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:46:08.592] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:46:09.200] INIT: version 2.96 booting [2025-09-24 11:46:09.312] INIT: Entering runlevel: 5 [2025-09-24 11:46:09.471] mtd24 attached [2025-09-24 11:46:09.488] mtd32 attached [2025-09-24 11:46:09.488] mtd28 attached [2025-09-24 11:46:09.536] RTNETLINK answers: File exists [2025-09-24 11:46:09.536] ubi0:textures is mounted. [2025-09-24 11:46:09.576] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:46:09.576] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:46:09.576] ubi1:dml_code is mounted. [2025-09-24 11:46:09.576] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:46:09.576] ubi2:animations is mounted. [2025-09-24 11:46:09.576] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:46:09.576] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:46:09.628] data.LB_FadeInType0=100 [2025-09-24 11:46:09.628] data.CHLH_FadeInType0=0 [2025-09-24 11:46:09.628] data.WU_FadeInDelay=0 [2025-09-24 11:46:09.628] max_time_out=0 [2025-09-24 11:46:09.628] No splash screen [2025-09-24 11:46:09.628] stop dss Done [2025-09-24 11:46:09.628] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:46:09.628] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:46:09.685] /dev/mem opened. [2025-09-24 11:46:09.685] Memory mapped at address 0xffff8fe24000. [2025-09-24 11:46:09.685] Read at address 0x00600018 (0xffff8fe24018): 0x00000000 [2025-09-24 11:46:09.685] Write at address 0x00600018 (0xffff8fe24018): 0x00400040, readback 0x00400040 [2025-09-24 11:46:09.780] Loaded PowerVR consumer services. [2025-09-24 11:46:09.941] Waiting data available... [2025-09-24 11:46:09.956] 512+0 records in [2025-09-24 11:46:09.956] 512+0 records out [2025-09-24 11:46:09.972] Starting syslogd/klogd: done [2025-09-24 11:46:10.004] DML Start [2025-09-24 11:46:10.181] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:46:10.388] DML res1: 0 [2025-09-24 11:46:10.831] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:46:10.831] Read Success [2025-09-24 11:46:10.831] Verifying certificate... [2025-09-24 11:46:11.039] Verified OK [2025-09-24 11:46:11.054] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:46:12.677] Verified OK [2025-09-24 11:46:12.677] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:46:13.283] Verified OK [2025-09-24 11:46:13.283] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:46:15.985] fs.protected_hardlinks = 1 [2025-09-24 11:46:16.001] fs.protected_symlinks = 1 [2025-09-24 11:46:16.017] kernel.modules_disabled = 1 [2025-09-24 11:46:16.209] [2025-09-24 11:46:16.209] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:46:17.398] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:46:25.205] SBL1:1210.0.1.0 [2025-09-24 11:46:25.237] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:46:26.820] SBL2:1210.0.1.0 [2025-09-24 11:46:26.868] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:46:26.964] j-A [2025-09-24 11:46:34.320] The R5 Autosar Classic is running [2025-09-24 11:46:34.320] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:46:34.340] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:46:34.948] INIT: version 2.96 booting [2025-09-24 11:46:35.060] INIT: Entering runlevel: 5 [2025-09-24 11:46:35.219] mtd24 attached [2025-09-24 11:46:35.219] mtd28 attached [2025-09-24 11:46:35.235] mtd32 attached [2025-09-24 11:46:35.283] RTNETLINK answers: File exists [2025-09-24 11:46:35.345] ubi0:textures is mounted. [2025-09-24 11:46:35.345] ubi2:dml_code is mounted. [2025-09-24 11:46:35.345] ubi1:animations is mounted. [2025-09-24 11:46:35.345] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:46:35.345] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:46:35.345] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:46:35.345] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:46:35.345] data.LB_FadeInType0=100 [2025-09-24 11:46:35.345] data.CHLH_FadeInType0=0 [2025-09-24 11:46:35.345] data.WU_FadeInDelay=0 [2025-09-24 11:46:35.345] max_time_out=0 [2025-09-24 11:46:35.345] No splash screen [2025-09-24 11:46:35.345] stop dss Done [2025-09-24 11:46:35.345] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:46:35.393] /dev/mem opened. [2025-09-24 11:46:35.419] Memory mapped at address 0xffffacaee000. [2025-09-24 11:46:35.419] Read at address 0x00600018 (0xffffacaee018): 0x00000000 [2025-09-24 11:46:35.419] Write at address 0x00600018 (0xffffacaee018): 0x00400040, readback 0x00400040 [2025-09-24 11:46:35.435] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:46:35.451] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:46:35.685] Loaded PowerVR consumer services. [2025-09-24 11:46:35.685] Waiting data available... [2025-09-24 11:46:35.701] 512+0 records in [2025-09-24 11:46:35.701] 512+0 records out [2025-09-24 11:46:35.750] Starting syslogd/klogd: done [2025-09-24 11:46:35.766] DML Start [2025-09-24 11:46:35.925] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:46:36.149] DML res1: 0 [2025-09-24 11:46:36.629] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:46:36.653] Read Success [2025-09-24 11:46:36.653] Verifying certificate... [2025-09-24 11:46:36.877] Verified OK [2025-09-24 11:46:36.909] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:46:38.502] Verified OK [2025-09-24 11:46:38.502] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:46:39.125] Verified OK [2025-09-24 11:46:39.125] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:46:41.796] fs.protected_hardlinks = 1 [2025-09-24 11:46:41.796] fs.protected_symlinks = 1 [2025-09-24 11:46:41.812] kernel.modules_disabled = 1 [2025-09-24 11:46:42.004] [2025-09-24 11:46:42.004] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:46:43.178] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:46:50.932] SBL1:1210.0.1.0 [2025-09-24 11:46:50.964] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:46:52.548] SBL2:1210.0.1.0 [2025-09-24 11:46:52.580] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:46:52.691] j-A [2025-09-24 11:47:00.064] The R5 Autosar Classic is running [2025-09-24 11:47:00.064] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:47:00.064] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:47:00.671] INIT: version 2.96 booting [2025-09-24 11:47:00.783] INIT: Entering runlevel: 5 [2025-09-24 11:47:00.944] mtd32 attached [2025-09-24 11:47:00.944] mtd24 attached [2025-09-24 11:47:00.960] mtd28 attached [2025-09-24 11:47:01.008] ubi0:dml_code is mounted. [2025-09-24 11:47:01.008] RTNETLINK answers: File exists [2025-09-24 11:47:01.023] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:47:01.024] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:47:01.055] ubi1:textures is mounted. [2025-09-24 11:47:01.055] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:47:01.055] ubi2:animations is mounted. [2025-09-24 11:47:01.055] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:47:01.055] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:47:01.082] data.LB_FadeInType0=100 [2025-09-24 11:47:01.082] data.CHLH_FadeInType0=0 [2025-09-24 11:47:01.082] data.WU_FadeInDelay=0 [2025-09-24 11:47:01.082] max_time_out=0 [2025-09-24 11:47:01.082] No splash screen [2025-09-24 11:47:01.082] stop dss Done [2025-09-24 11:47:01.098] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:47:01.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:47:01.164] /dev/mem opened. [2025-09-24 11:47:01.164] Memory mapped at address 0xffff891fd000. [2025-09-24 11:47:01.164] Read at address 0x00600018 (0xffff891fd018): 0x00000000 [2025-09-24 11:47:01.164] Write at address 0x00600018 (0xffff891fd018): 0x00400040, readback 0x00400040 [2025-09-24 11:47:01.404] Loaded PowerVR consumer services. [2025-09-24 11:47:01.420] Waiting data available... [2025-09-24 11:47:01.436] 512+0 records in [2025-09-24 11:47:01.452] 512+0 records out [2025-09-24 11:47:01.484] Starting syslogd/klogd: done [2025-09-24 11:47:01.500] DML Start [2025-09-24 11:47:01.676] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:47:01.932] DML res1: 0 [2025-09-24 11:47:02.310] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:47:02.310] Read Success [2025-09-24 11:47:02.310] Verifying certificate... [2025-09-24 11:47:02.597] Verified OK [2025-09-24 11:47:02.613] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:47:04.333] Verified OK [2025-09-24 11:47:04.333] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:47:04.909] Verified OK [2025-09-24 11:47:04.909] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:47:07.596] fs.protected_hardlinks = 1 [2025-09-24 11:47:07.596] fs.protected_symlinks = 1 [2025-09-24 11:47:07.612] kernel.modules_disabled = 1 [2025-09-24 11:47:07.804] [2025-09-24 11:47:07.804] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:47:08.947] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:47:16.666] SBL1:1210.0.1.0 [2025-09-24 11:47:16.714] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:47:18.280] SBL2:1210.0.1.0 [2025-09-24 11:47:18.328] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:47:18.440] j-A [2025-09-24 11:47:25.812] The R5 Autosar Classic is running [2025-09-24 11:47:25.812] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:47:25.812] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:47:26.420] INIT: version 2.96 booting [2025-09-24 11:47:26.531] INIT: Entering runlevel: 5 [2025-09-24 11:47:26.675] mtd24 attached [2025-09-24 11:47:26.691] mtd32 attached [2025-09-24 11:47:26.706] mtd28 attached [2025-09-24 11:47:26.738] ubi0:textures is mounted. [2025-09-24 11:47:26.755] RTNETLINK answers: File exists [2025-09-24 11:47:26.755] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:47:26.784] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:47:26.784] ubi1:dml_code is mounted. [2025-09-24 11:47:26.784] ubi2:animations is mounted. [2025-09-24 11:47:26.784] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:47:26.784] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:47:26.814] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:47:26.814] data.LB_FadeInType0=100 [2025-09-24 11:47:26.814] data.CHLH_FadeInType0=0 [2025-09-24 11:47:26.814] data.WU_FadeInDelay=0 [2025-09-24 11:47:26.814] max_time_out=0 [2025-09-24 11:47:26.814] No splash screen [2025-09-24 11:47:26.814] stop dss Done [2025-09-24 11:47:26.893] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:47:26.893] /dev/mem opened. [2025-09-24 11:47:26.893] Memory mapped at address 0xffffa3b69000. [2025-09-24 11:47:26.893] Read at address 0x00600018 (0xffffa3b69018): 0x00000000 [2025-09-24 11:47:26.893] Write at address 0x00600018 (0xffffa3b69018): 0x00400040, readback 0x00400040 [2025-09-24 11:47:26.893] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:47:26.973] Loaded PowerVR consumer services. [2025-09-24 11:47:27.165] Waiting data available... [2025-09-24 11:47:27.165] 512+0 records in [2025-09-24 11:47:27.181] 512+0 records out [2025-09-24 11:47:27.212] Starting syslogd/klogd: done [2025-09-24 11:47:27.228] DML Start [2025-09-24 11:47:27.405] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:47:27.596] DML res1: 0 [2025-09-24 11:47:28.133] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:47:28.133] Read Success [2025-09-24 11:47:28.133] Verifying certificate... [2025-09-24 11:47:28.389] Verified OK [2025-09-24 11:47:28.420] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:47:30.105] Verified OK [2025-09-24 11:47:30.105] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:47:30.681] Verified OK [2025-09-24 11:47:30.681] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:47:33.303] fs.protected_hardlinks = 1 [2025-09-24 11:47:33.319] fs.protected_symlinks = 1 [2025-09-24 11:47:33.319] kernel.modules_disabled = 1 [2025-09-24 11:47:33.526] [2025-09-24 11:47:33.526] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:47:34.646] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:47:42.424] SBL1:1210.0.1.0 [2025-09-24 11:47:42.472] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:47:44.038] SBL2:1210.0.1.0 [2025-09-24 11:47:44.086] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:47:44.198] j-A [2025-09-24 11:47:51.569] The R5 Autosar Classic is running [2025-09-24 11:47:51.569] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:47:51.569] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:47:52.176] INIT: version 2.96 booting [2025-09-24 11:47:52.288] INIT: Entering runlevel: 5 [2025-09-24 11:47:52.448] mtd32 attached [2025-09-24 11:47:52.448] mtd24 attached [2025-09-24 11:47:52.464] mtd28 attached [2025-09-24 11:47:52.511] RTNETLINK answers: File exists [2025-09-24 11:47:52.581] ubi0:dml_code is mounted. [2025-09-24 11:47:52.581] ubi1:textures is mounted. [2025-09-24 11:47:52.581] ubi2:animations is mounted. [2025-09-24 11:47:52.581] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:47:52.581] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:47:52.581] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:47:52.581] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:47:52.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:47:52.581] data.LB_FadeInType0=100 [2025-09-24 11:47:52.581] data.CHLH_FadeInType0=0 [2025-09-24 11:47:52.581] data.WU_FadeInDelay=0 [2025-09-24 11:47:52.581] max_time_out=0 [2025-09-24 11:47:52.581] No splash screen [2025-09-24 11:47:52.581] stop dss Done [2025-09-24 11:47:52.651] /dev/mem opened. [2025-09-24 11:47:52.651] Memory mapped at address 0xffff9a6cb000. [2025-09-24 11:47:52.651] Read at address 0x00600018 (0xffff9a6cb018): 0x00000000 [2025-09-24 11:47:52.651] Write at address 0x00600018 (0xffff9a6cb018): 0x00400040, readback 0x00400040 [2025-09-24 11:47:52.651] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:47:52.667] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:47:52.923] Loaded PowerVR consumer services. [2025-09-24 11:47:52.971] Waiting data available... [2025-09-24 11:47:52.987] 512+0 records in [2025-09-24 11:47:53.003] 512+0 records out [2025-09-24 11:47:53.019] Starting syslogd/klogd: done [2025-09-24 11:47:53.035] DML Start [2025-09-24 11:47:53.210] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:47:53.386] DML res1: 0 [2025-09-24 11:47:53.929] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:47:53.929] Read Success [2025-09-24 11:47:53.929] Verifying certificate... [2025-09-24 11:47:54.201] Verified OK [2025-09-24 11:47:54.232] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:47:55.955] Verified OK [2025-09-24 11:47:55.955] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:47:56.527] Verified OK [2025-09-24 11:47:56.527] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:47:58.990] fs.protected_hardlinks = 1 [2025-09-24 11:47:59.006] fs.protected_symlinks = 1 [2025-09-24 11:47:59.006] kernel.modules_disabled = 1 [2025-09-24 11:47:59.181] [2025-09-24 11:47:59.181] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:48:00.453] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:48:08.148] SBL1:1210.0.1.0 [2025-09-24 11:48:08.180] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:48:09.763] SBL2:1210.0.1.0 [2025-09-24 11:48:09.811] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:48:09.908] j-A [2025-09-24 11:48:17.262] The R5 Autosar Classic is running [2025-09-24 11:48:17.262] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:48:17.283] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:48:17.891] INIT: version 2.96 booting [2025-09-24 11:48:18.002] INIT: Entering runlevel: 5 [2025-09-24 11:48:18.146] mtd24 attached [2025-09-24 11:48:18.162] mtd28 attached [2025-09-24 11:48:18.178] mtd32 attached [2025-09-24 11:48:18.226] ubi0:textures is mounted. [2025-09-24 11:48:18.226] RTNETLINK answers: File exists [2025-09-24 11:48:18.281] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:48:18.281] ubi1:animations is mounted. [2025-09-24 11:48:18.281] ubi2:dml_code is mounted. [2025-09-24 11:48:18.281] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:48:18.281] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:48:18.281] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:48:18.281] data.LB_FadeInType0=100 [2025-09-24 11:48:18.281] data.CHLH_FadeInType0=0 [2025-09-24 11:48:18.281] data.WU_FadeInDelay=0 [2025-09-24 11:48:18.281] max_time_out=0 [2025-09-24 11:48:18.281] No splash screen [2025-09-24 11:48:18.281] stop dss Done [2025-09-24 11:48:18.281] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:48:18.330] /dev/mem opened. [2025-09-24 11:48:18.330] Memory mapped at address 0xffff9de28000. [2025-09-24 11:48:18.355] Read at address 0x00600018 (0xffff9de28018): 0x00000000 [2025-09-24 11:48:18.355] Write at address 0x00600018 (0xffff9de28018): 0x00400040, readback 0x00400040 [2025-09-24 11:48:18.387] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:48:18.403] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:48:18.563] Loaded PowerVR consumer services. [2025-09-24 11:48:18.643] Waiting data available... [2025-09-24 11:48:18.659] 512+0 records in [2025-09-24 11:48:18.659] 512+0 records out [2025-09-24 11:48:18.706] Starting syslogd/klogd: done [2025-09-24 11:48:18.723] DML Start [2025-09-24 11:48:18.899] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:48:19.123] DML res1: 0 [2025-09-24 11:48:19.522] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:48:19.538] Read Success [2025-09-24 11:48:19.538] Verifying certificate... [2025-09-24 11:48:19.762] Verified OK [2025-09-24 11:48:19.778] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:48:21.440] Verified OK [2025-09-24 11:48:21.440] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:48:22.076] Verified OK [2025-09-24 11:48:22.076] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:48:24.618] fs.protected_hardlinks = 1 [2025-09-24 11:48:24.634] fs.protected_symlinks = 1 [2025-09-24 11:48:24.634] kernel.modules_disabled = 1 [2025-09-24 11:48:24.827] [2025-09-24 11:48:24.827] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:48:26.143] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:48:33.905] SBL1:1210.0.1.0 [2025-09-24 11:48:33.953] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:48:35.520] SBL2:1210.0.1.0 [2025-09-24 11:48:35.567] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:48:35.664] j-A [2025-09-24 11:48:43.019] The R5 Autosar Classic is running [2025-09-24 11:48:43.043] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:48:43.043] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:48:43.651] INIT: version 2.96 booting [2025-09-24 11:48:43.762] INIT: Entering runlevel: 5 [2025-09-24 11:48:43.922] mtd32 attached [2025-09-24 11:48:43.922] mtd24 attached [2025-09-24 11:48:43.938] mtd28 attached [2025-09-24 11:48:43.954] ubi0:dml_code is mounted. [2025-09-24 11:48:43.986] RTNETLINK answers: File exists [2025-09-24 11:48:44.045] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:48:44.045] ubi2:animations is mounted. [2025-09-24 11:48:44.045] ubi1:textures is mounted. [2025-09-24 11:48:44.045] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:48:44.045] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:48:44.045] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:48:44.045] data.LB_FadeInType0=100 [2025-09-24 11:48:44.045] data.CHLH_FadeInType0=0 [2025-09-24 11:48:44.045] data.WU_FadeInDelay=0 [2025-09-24 11:48:44.045] max_time_out=0 [2025-09-24 11:48:44.045] No splash screen [2025-09-24 11:48:44.045] stop dss Done [2025-09-24 11:48:44.045] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:48:44.077] /dev/mem opened. [2025-09-24 11:48:44.077] Memory mapped at address 0xffff99ed4000. [2025-09-24 11:48:44.114] Read at address 0x00600018 (0xffff99ed4018): 0x00000000 [2025-09-24 11:48:44.114] Write at address 0x00600018 (0xffff99ed4018): 0x00400040, readback 0x00400040 [2025-09-24 11:48:44.114] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:48:44.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:48:44.210] Loaded PowerVR consumer services. [2025-09-24 11:48:44.402] Waiting data available... [2025-09-24 11:48:44.434] 512+0 records in [2025-09-24 11:48:44.434] 512+0 records out [2025-09-24 11:48:44.466] Starting syslogd/klogd: done [2025-09-24 11:48:44.482] DML Start [2025-09-24 11:48:44.642] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:48:44.834] DML res1: 0 [2025-09-24 11:48:45.346] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:48:45.346] Read Success [2025-09-24 11:48:45.362] Verifying certificate... [2025-09-24 11:48:45.618] Verified OK [2025-09-24 11:48:45.634] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:48:47.323] Verified OK [2025-09-24 11:48:47.323] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:48:47.909] Verified OK [2025-09-24 11:48:47.909] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:48:50.371] fs.protected_hardlinks = 1 [2025-09-24 11:48:50.403] fs.protected_symlinks = 1 [2025-09-24 11:48:50.403] kernel.modules_disabled = 1 [2025-09-24 11:48:50.595] [2025-09-24 11:48:50.595] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:48:51.922] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:48:59.637] SBL1:1210.0.1.0 [2025-09-24 11:48:59.669] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:49:01.251] SBL2:1210.0.1.0 [2025-09-24 11:49:01.283] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:49:01.396] j-A [2025-09-24 11:49:08.771] The R5 Autosar Classic is running [2025-09-24 11:49:08.771] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:49:08.771] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:49:09.378] INIT: version 2.96 booting [2025-09-24 11:49:09.490] INIT: Entering runlevel: 5 [2025-09-24 11:49:09.634] mtd24 attached [2025-09-24 11:49:09.650] mtd28 attached [2025-09-24 11:49:09.666] mtd32 attached [2025-09-24 11:49:09.768] ubi0:textures is mounted. [2025-09-24 11:49:09.768] RTNETLINK answers: File exists [2025-09-24 11:49:09.768] ubi1:animations is mounted. [2025-09-24 11:49:09.768] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:49:09.768] ubi2:dml_code is mounted. [2025-09-24 11:49:09.768] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:49:09.768] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:49:09.768] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:49:09.768] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:49:09.768] data.LB_FadeInType0=100 [2025-09-24 11:49:09.768] data.CHLH_FadeInType0=0 [2025-09-24 11:49:09.768] data.WU_FadeInDelay=0 [2025-09-24 11:49:09.768] max_time_out=0 [2025-09-24 11:49:09.768] No splash screen [2025-09-24 11:49:09.768] stop dss Done [2025-09-24 11:49:09.799] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:49:09.816] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:49:09.816] /dev/mem opened. [2025-09-24 11:49:09.848] Memory mapped at address 0xffffbd010000. [2025-09-24 11:49:09.848] Read at address 0x00600018 (0xffffbd010018): 0x00000000 [2025-09-24 11:49:09.848] Write at address 0x00600018 (0xffffbd010018): 0x00400040, readback 0x00400040 [2025-09-24 11:49:09.959] Loaded PowerVR consumer services. [2025-09-24 11:49:10.120] Waiting data available... [2025-09-24 11:49:10.135] 512+0 records in [2025-09-24 11:49:10.135] 512+0 records out [2025-09-24 11:49:10.183] Starting syslogd/klogd: done [2025-09-24 11:49:10.199] DML Start [2025-09-24 11:49:10.408] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:49:10.631] DML res1: 0 [2025-09-24 11:49:11.010] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:49:11.010] Read Success [2025-09-24 11:49:11.010] Verifying certificate... [2025-09-24 11:49:11.250] Verified OK [2025-09-24 11:49:11.250] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:49:12.942] Verified OK [2025-09-24 11:49:12.942] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:49:13.580] Verified OK [2025-09-24 11:49:13.580] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:49:16.186] fs.protected_hardlinks = 1 [2025-09-24 11:49:16.186] fs.protected_symlinks = 1 [2025-09-24 11:49:16.202] kernel.modules_disabled = 1 [2025-09-24 11:49:16.378] [2025-09-24 11:49:16.378] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:49:17.625] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:49:25.380] SBL1:1210.0.1.0 [2025-09-24 11:49:25.428] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:49:26.994] SBL2:1210.0.1.0 [2025-09-24 11:49:27.042] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:49:27.154] j-A [2025-09-24 11:49:34.493] The R5 Autosar Classic is running [2025-09-24 11:49:34.518] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:49:34.518] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:49:35.126] INIT: version 2.96 booting [2025-09-24 11:49:35.238] INIT: Entering runlevel: 5 [2025-09-24 11:49:35.398] mtd28 attached [2025-09-24 11:49:35.414] mtd24 attached [2025-09-24 11:49:35.414] mtd32 attached [2025-09-24 11:49:35.462] ubi0:animations is mounted. [2025-09-24 11:49:35.462] RTNETLINK answers: File exists [2025-09-24 11:49:35.478] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:49:35.505] ubi1:textures is mounted. [2025-09-24 11:49:35.505] ubi2:dml_code is mounted. [2025-09-24 11:49:35.505] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:49:35.505] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:49:35.505] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:49:35.505] data.LB_FadeInType0=100 [2025-09-24 11:49:35.531] data.CHLH_FadeInType0=0 [2025-09-24 11:49:35.531] data.WU_FadeInDelay=0 [2025-09-24 11:49:35.531] max_time_out=0 [2025-09-24 11:49:35.531] No splash screen [2025-09-24 11:49:35.531] stop dss Done [2025-09-24 11:49:35.531] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:49:35.610] /dev/mem opened. [2025-09-24 11:49:35.610] Memory mapped at address 0xffffb3730000. [2025-09-24 11:49:35.610] Read at address 0x00600018 (0xffffb3730018): 0x00000000 [2025-09-24 11:49:35.610] Write at address 0x00600018 (0xffffb3730018): 0x00400040, readback 0x00400040 [2025-09-24 11:49:35.610] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:49:35.610] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:49:35.674] Loaded PowerVR consumer services. [2025-09-24 11:49:35.866] Waiting data available... [2025-09-24 11:49:35.898] 512+0 records in [2025-09-24 11:49:35.898] 512+0 records out [2025-09-24 11:49:35.946] Starting syslogd/klogd: done [2025-09-24 11:49:35.962] DML Start [2025-09-24 11:49:36.106] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:49:36.377] DML res1: 0 [2025-09-24 11:49:36.761] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:49:36.782] Read Success [2025-09-24 11:49:36.782] Verifying certificate... [2025-09-24 11:49:36.990] Verified OK [2025-09-24 11:49:37.006] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:49:38.707] Verified OK [2025-09-24 11:49:38.707] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:49:39.340] Verified OK [2025-09-24 11:49:39.340] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:49:41.866] fs.protected_hardlinks = 1 [2025-09-24 11:49:41.866] fs.protected_symlinks = 1 [2025-09-24 11:49:41.881] kernel.modules_disabled = 1 [2025-09-24 11:49:42.074] [2025-09-24 11:49:42.074] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:49:43.464] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:49:51.121] SBL1:1210.0.1.0 [2025-09-24 11:49:51.170] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:49:52.735] SBL2:1210.0.1.0 [2025-09-24 11:49:52.783] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:49:52.896] j-A [2025-09-24 11:50:00.235] The R5 Autosar Classic is running [2025-09-24 11:50:00.261] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:50:00.261] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:50:00.869] INIT: version 2.96 booting [2025-09-24 11:50:00.980] INIT: Entering runlevel: 5 [2025-09-24 11:50:01.124] mtd24 attached [2025-09-24 11:50:01.140] mtd28 attached [2025-09-24 11:50:01.156] mtd32 attached [2025-09-24 11:50:01.188] ubi0:textures is mounted. [2025-09-24 11:50:01.204] RTNETLINK answers: File exists [2025-09-24 11:50:01.261] ubi1:animations is mounted. [2025-09-24 11:50:01.261] ubi2:dml_code is mounted. [2025-09-24 11:50:01.261] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:50:01.261] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:50:01.261] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:50:01.261] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:50:01.261] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:50:01.261] data.LB_FadeInType0=100 [2025-09-24 11:50:01.261] data.CHLH_FadeInType0=0 [2025-09-24 11:50:01.261] data.WU_FadeInDelay=0 [2025-09-24 11:50:01.261] max_time_out=0 [2025-09-24 11:50:01.261] No splash screen [2025-09-24 11:50:01.261] stop dss Done [2025-09-24 11:50:01.331] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:50:01.331] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:50:01.331] /dev/mem opened. [2025-09-24 11:50:01.331] Memory mapped at address 0xffff98341000. [2025-09-24 11:50:01.331] Read at address 0x00600018 (0xffff98341018): 0x00000000 [2025-09-24 11:50:01.331] Write at address 0x00600018 (0xffff98341018): 0x00400040, readback 0x00400040 [2025-09-24 11:50:01.571] Loaded PowerVR consumer services. [2025-09-24 11:50:01.587] Waiting data available... [2025-09-24 11:50:01.619] 512+0 records in [2025-09-24 11:50:01.619] 512+0 records out [2025-09-24 11:50:01.667] Starting syslogd/klogd: done [2025-09-24 11:50:01.699] DML Start [2025-09-24 11:50:01.842] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:50:02.083] DML res1: 0 [2025-09-24 11:50:02.520] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:50:02.520] Read Success [2025-09-24 11:50:02.520] Verifying certificate... [2025-09-24 11:50:02.743] Verified OK [2025-09-24 11:50:02.759] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:50:04.391] Verified OK [2025-09-24 11:50:04.391] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:50:05.050] Verified OK [2025-09-24 11:50:05.050] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:50:07.640] fs.protected_hardlinks = 1 [2025-09-24 11:50:07.666] fs.protected_symlinks = 1 [2025-09-24 11:50:07.666] kernel.modules_disabled = 1 [2025-09-24 11:50:07.842] [2025-09-24 11:50:07.842] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:50:09.121] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:50:16.888] SBL1:1210.0.1.0 [2025-09-24 11:50:16.920] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:50:18.503] SBL2:1210.0.1.0 [2025-09-24 11:50:18.550] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:50:18.646] j-A [2025-09-24 11:50:26.002] The R5 Autosar Classic is running [2025-09-24 11:50:26.002] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:50:26.023] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:50:26.630] INIT: version 2.96 booting [2025-09-24 11:50:26.743] INIT: Entering runlevel: 5 [2025-09-24 11:50:26.886] mtd24 attached [2025-09-24 11:50:26.902] mtd32 attached [2025-09-24 11:50:26.935] mtd28 attached [2025-09-24 11:50:26.935] ubi0:textures is mounted. [2025-09-24 11:50:26.967] ubi1:dml_code is mounted. [2025-09-24 11:50:26.967] RTNETLINK answers: File exists [2025-09-24 11:50:27.022] ubi2:animations is mounted. [2025-09-24 11:50:27.022] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:50:27.022] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:50:27.022] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:50:27.022] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:50:27.022] data.LB_FadeInType0=100 [2025-09-24 11:50:27.022] data.CHLH_FadeInType0=0 [2025-09-24 11:50:27.022] data.WU_FadeInDelay=0 [2025-09-24 11:50:27.022] max_time_out=0 [2025-09-24 11:50:27.022] No splash screen [2025-09-24 11:50:27.022] stop dss Done [2025-09-24 11:50:27.022] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:50:27.099] /dev/mem opened. [2025-09-24 11:50:27.099] Memory mapped at address 0xffff9b3e3000. [2025-09-24 11:50:27.099] Read at address 0x00600018 (0xffff9b3e3018): 0x00000000 [2025-09-24 11:50:27.099] Write at address 0x00600018 (0xffff9b3e3018): 0x00400040, readback 0x00400040 [2025-09-24 11:50:27.099] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:50:27.099] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:50:27.291] Loaded PowerVR consumer services. [2025-09-24 11:50:27.387] Waiting data available... [2025-09-24 11:50:27.419] 512+0 records in [2025-09-24 11:50:27.419] 512+0 records out [2025-09-24 11:50:27.451] Starting syslogd/klogd: done [2025-09-24 11:50:27.451] DML Start [2025-09-24 11:50:27.610] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:50:27.851] DML res1: 0 [2025-09-24 11:50:28.313] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:50:28.313] Read Success [2025-09-24 11:50:28.313] Verifying certificate... [2025-09-24 11:50:28.617] Verified OK [2025-09-24 11:50:28.649] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:50:30.263] Verified OK [2025-09-24 11:50:30.263] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:50:30.829] Verified OK [2025-09-24 11:50:30.829] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:50:33.372] fs.protected_hardlinks = 1 [2025-09-24 11:50:33.388] fs.protected_symlinks = 1 [2025-09-24 11:50:33.404] kernel.modules_disabled = 1 [2025-09-24 11:50:33.596] [2025-09-24 11:50:33.596] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:50:34.885] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:50:42.610] SBL1:1210.0.1.0 [2025-09-24 11:50:42.658] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:50:44.225] SBL2:1210.0.1.0 [2025-09-24 11:50:44.273] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:50:44.385] j-A [2025-09-24 11:50:51.757] The R5 Autosar Classic is running [2025-09-24 11:50:51.757] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:50:51.757] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:50:52.364] INIT: version 2.96 booting [2025-09-24 11:50:52.476] INIT: Entering runlevel: 5 [2025-09-24 11:50:52.620] mtd24 attached [2025-09-24 11:50:52.636] mtd32 attached [2025-09-24 11:50:52.652] mtd28 attached [2025-09-24 11:50:52.700] RTNETLINK answers: File exists [2025-09-24 11:50:52.700] ubi0:textures is mounted. [2025-09-24 11:50:52.735] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:50:52.735] ubi2:animations is mounted. [2025-09-24 11:50:52.735] ubi1:dml_code is mounted. [2025-09-24 11:50:52.735] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:50:52.735] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:50:52.767] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:50:52.767] data.LB_FadeInType0=100 [2025-09-24 11:50:52.767] data.CHLH_FadeInType0=0 [2025-09-24 11:50:52.767] data.WU_FadeInDelay=0 [2025-09-24 11:50:52.767] max_time_out=0 [2025-09-24 11:50:52.767] No splash screen [2025-09-24 11:50:52.767] stop dss Done [2025-09-24 11:50:52.767] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:50:52.815] /dev/mem opened. [2025-09-24 11:50:52.815] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:50:52.851] Memory mapped at address 0xffffa721f000. [2025-09-24 11:50:52.851] Read at address 0x00600018 (0xffffa721f018): 0x00000000 [2025-09-24 11:50:52.851] Write at address 0x00600018 (0xffffa721f018): 0x00400040, readback 0x00400040 [2025-09-24 11:50:52.851] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:50:52.963] Loaded PowerVR consumer services. [2025-09-24 11:50:53.108] Waiting data available... [2025-09-24 11:50:53.124] 512+0 records in [2025-09-24 11:50:53.124] 512+0 records out [2025-09-24 11:50:53.172] Starting syslogd/klogd: done [2025-09-24 11:50:53.188] DML Start [2025-09-24 11:50:53.347] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:50:53.572] DML res1: 0 [2025-09-24 11:50:54.035] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:50:54.051] Read Success [2025-09-24 11:50:54.051] Verifying certificate... [2025-09-24 11:50:54.291] Verified OK [2025-09-24 11:50:54.307] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:50:55.900] Verified OK [2025-09-24 11:50:55.900] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:50:56.553] Verified OK [2025-09-24 11:50:56.553] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:50:59.207] fs.protected_hardlinks = 1 [2025-09-24 11:50:59.207] fs.protected_symlinks = 1 [2025-09-24 11:50:59.223] kernel.modules_disabled = 1 [2025-09-24 11:50:59.415] [2025-09-24 11:50:59.415] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:51:00.608] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:51:08.351] SBL1:1210.0.1.0 [2025-09-24 11:51:08.399] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:51:09.965] SBL2:1210.0.1.0 [2025-09-24 11:51:10.013] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:51:10.109] j-A [2025-09-24 11:51:17.464] The R5 Autosar Classic is running [2025-09-24 11:51:17.488] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:51:17.488] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:51:18.096] INIT: version 2.96 booting [2025-09-24 11:51:18.207] INIT: Entering runlevel: 5 [2025-09-24 11:51:18.368] mtd32 attached [2025-09-24 11:51:18.368] mtd24 attached [2025-09-24 11:51:18.383] mtd28 attached [2025-09-24 11:51:18.463] RTNETLINK answers: File exists [2025-09-24 11:51:18.463] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:51:18.463] ubi0:dml_code is mounted. [2025-09-24 11:51:18.463] ubi1:textures is mounted. [2025-09-24 11:51:18.463] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:51:18.463] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:51:18.463] ubi2:animations is mounted. [2025-09-24 11:51:18.463] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:51:18.463] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:51:18.492] data.LB_FadeInType0=100 [2025-09-24 11:51:18.492] data.CHLH_FadeInType0=0 [2025-09-24 11:51:18.492] data.WU_FadeInDelay=0 [2025-09-24 11:51:18.492] max_time_out=0 [2025-09-24 11:51:18.492] No splash screen [2025-09-24 11:51:18.492] stop dss Done [2025-09-24 11:51:18.519] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:51:18.519] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:51:18.568] /dev/mem opened. [2025-09-24 11:51:18.568] Memory mapped at address 0xffffa8e4e000. [2025-09-24 11:51:18.568] Read at address 0x00600018 (0xffffa8e4e018): 0x00000000 [2025-09-24 11:51:18.568] Write at address 0x00600018 (0xffffa8e4e018): 0x00400040, readback 0x00400040 [2025-09-24 11:51:18.855] Loaded PowerVR consumer services. [2025-09-24 11:51:18.887] Waiting data available... [2025-09-24 11:51:18.903] 512+0 records in [2025-09-24 11:51:18.903] 512+0 records out [2025-09-24 11:51:18.935] Starting syslogd/klogd: done [2025-09-24 11:51:18.951] DML Start [2025-09-24 11:51:19.110] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:51:19.350] DML res1: 0 [2025-09-24 11:51:19.813] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:51:19.813] Read Success [2025-09-24 11:51:19.813] Verifying certificate... [2025-09-24 11:51:20.134] Verified OK [2025-09-24 11:51:20.166] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:51:21.850] Verified OK [2025-09-24 11:51:21.850] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:51:22.377] Verified OK [2025-09-24 11:51:22.377] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:51:24.823] fs.protected_hardlinks = 1 [2025-09-24 11:51:24.823] fs.protected_symlinks = 1 [2025-09-24 11:51:24.839] kernel.modules_disabled = 1 [2025-09-24 11:51:25.032] [2025-09-24 11:51:25.032] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:51:26.402] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:51:34.089] SBL1:1210.0.1.0 [2025-09-24 11:51:34.136] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:51:35.703] SBL2:1210.0.1.0 [2025-09-24 11:51:35.751] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:51:35.847] j-A [2025-09-24 11:51:43.202] The R5 Autosar Classic is running [2025-09-24 11:51:43.227] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:51:43.227] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:51:43.833] INIT: version 2.96 booting [2025-09-24 11:51:43.962] INIT: Entering runlevel: 5 [2025-09-24 11:51:44.106] mtd24 attached [2025-09-24 11:51:44.122] mtd32 attached [2025-09-24 11:51:44.122] mtd28 attached [2025-09-24 11:51:44.153] ubi0:textures is mounted. [2025-09-24 11:51:44.233] ubi2:animations is mounted. [2025-09-24 11:51:44.233] RTNETLINK answers: File exists [2025-09-24 11:51:44.233] ubi1:dml_code is mounted. [2025-09-24 11:51:44.233] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:51:44.233] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:51:44.233] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:51:44.233] data.LB_FadeInType0=100 [2025-09-24 11:51:44.233] data.CHLH_FadeInType0=0 [2025-09-24 11:51:44.233] data.WU_FadeInDelay=0 [2025-09-24 11:51:44.233] max_time_out=0 [2025-09-24 11:51:44.233] No splash screen [2025-09-24 11:51:44.233] stop dss Done [2025-09-24 11:51:44.233] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:51:44.233] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:51:44.265] /dev/mem opened. [2025-09-24 11:51:44.265] Memory mapped at address 0xffff8e3b3000. [2025-09-24 11:51:44.291] Read at address 0x00600018 (0xffff8e3b3018): 0x00000000 [2025-09-24 11:51:44.291] Write at address 0x00600018 (0xffff8e3b3018): 0x00400040, readback 0x00400040 [2025-09-24 11:51:44.291] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:51:44.307] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:51:44.467] Loaded PowerVR consumer services. [2025-09-24 11:51:44.595] Waiting data available... [2025-09-24 11:51:44.610] 512+0 records in [2025-09-24 11:51:44.610] 512+0 records out [2025-09-24 11:51:44.658] Starting syslogd/klogd: done [2025-09-24 11:51:44.674] DML Start [2025-09-24 11:51:44.850] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:51:45.042] DML res1: 0 [2025-09-24 11:51:45.519] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:51:45.519] Read Success [2025-09-24 11:51:45.519] Verifying certificate... [2025-09-24 11:51:45.742] Verified OK [2025-09-24 11:51:45.758] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:51:47.390] Verified OK [2025-09-24 11:51:47.390] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:51:48.020] Verified OK [2025-09-24 11:51:48.020] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:51:50.706] fs.protected_hardlinks = 1 [2025-09-24 11:51:50.706] fs.protected_symlinks = 1 [2025-09-24 11:51:50.722] kernel.modules_disabled = 1 [2025-09-24 11:51:50.930] [2025-09-24 11:51:50.930] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:51:52.090] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:51:59.824] SBL1:1210.0.1.0 [2025-09-24 11:51:59.856] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:52:01.440] SBL2:1210.0.1.0 [2025-09-24 11:52:01.472] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:52:01.583] j-A [2025-09-24 11:52:08.958] The R5 Autosar Classic is running [2025-09-24 11:52:08.958] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:52:08.958] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:52:09.565] INIT: version 2.96 booting [2025-09-24 11:52:09.678] INIT: Entering runlevel: 5 [2025-09-24 11:52:09.821] mtd24 attached [2025-09-24 11:52:09.838] mtd28 attached [2025-09-24 11:52:09.853] mtd32 attached [2025-09-24 11:52:09.958] RTNETLINK answers: File exists [2025-09-24 11:52:09.958] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:52:09.958] ubi0:textures is mounted. [2025-09-24 11:52:09.958] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:52:09.958] ubi2:dml_code is mounted. [2025-09-24 11:52:09.958] ubi1:animations is mounted. [2025-09-24 11:52:09.958] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:52:09.958] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:52:09.958] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:52:09.958] data.LB_FadeInType0=100 [2025-09-24 11:52:09.958] data.CHLH_FadeInType0=0 [2025-09-24 11:52:09.958] data.WU_FadeInDelay=0 [2025-09-24 11:52:09.958] max_time_out=0 [2025-09-24 11:52:09.958] No splash screen [2025-09-24 11:52:09.958] stop dss Done [2025-09-24 11:52:09.990] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:52:10.006] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:52:10.046] /dev/mem opened. [2025-09-24 11:52:10.046] Memory mapped at address 0xffffa7289000. [2025-09-24 11:52:10.046] Read at address 0x00600018 (0xffffa7289018): 0x00000000 [2025-09-24 11:52:10.046] Write at address 0x00600018 (0xffffa7289018): 0x00400040, readback 0x00400040 [2025-09-24 11:52:10.174] Loaded PowerVR consumer services. [2025-09-24 11:52:10.318] Waiting data available... [2025-09-24 11:52:10.334] 512+0 records in [2025-09-24 11:52:10.334] 512+0 records out [2025-09-24 11:52:10.366] Starting syslogd/klogd: done [2025-09-24 11:52:10.382] DML Start [2025-09-24 11:52:10.557] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:52:10.765] DML res1: 0 [2025-09-24 11:52:11.293] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:52:11.314] Read Success [2025-09-24 11:52:11.314] Verifying certificate... [2025-09-24 11:52:11.602] Verified OK [2025-09-24 11:52:11.634] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:52:13.249] Verified OK [2025-09-24 11:52:13.249] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:52:13.904] Verified OK [2025-09-24 11:52:13.904] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:52:16.508] fs.protected_hardlinks = 1 [2025-09-24 11:52:16.508] fs.protected_symlinks = 1 [2025-09-24 11:52:16.508] kernel.modules_disabled = 1 [2025-09-24 11:52:16.683] [2025-09-24 11:52:16.683] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:52:17.833] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:52:25.551] SBL1:1210.0.1.0 [2025-09-24 11:52:25.583] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:52:27.166] SBL2:1210.0.1.0 [2025-09-24 11:52:27.214] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:52:27.310] j-A [2025-09-24 11:52:34.665] The R5 Autosar Classic is running [2025-09-24 11:52:34.686] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:52:34.686] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:52:35.293] INIT: version 2.96 booting [2025-09-24 11:52:35.405] INIT: Entering runlevel: 5 [2025-09-24 11:52:35.549] mtd24 attached [2025-09-24 11:52:35.564] mtd28 attached [2025-09-24 11:52:35.580] mtd32 attached [2025-09-24 11:52:35.688] ubi1:animations is mounted. [2025-09-24 11:52:35.688] RTNETLINK answers: File exists [2025-09-24 11:52:35.688] ubi0:textures is mounted. [2025-09-24 11:52:35.688] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:52:35.688] ubi2:dml_code is mounted. [2025-09-24 11:52:35.688] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:52:35.688] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:52:35.688] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:52:35.688] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:52:35.688] data.LB_FadeInType0=100 [2025-09-24 11:52:35.688] data.CHLH_FadeInType0=0 [2025-09-24 11:52:35.688] data.WU_FadeInDelay=0 [2025-09-24 11:52:35.688] max_time_out=0 [2025-09-24 11:52:35.688] No splash screen [2025-09-24 11:52:35.688] stop dss Done [2025-09-24 11:52:35.754] /dev/mem opened. [2025-09-24 11:52:35.754] Memory mapped at address 0xffff9d5a2000. [2025-09-24 11:52:35.754] Read at address 0x00600018 (0xffff9d5a2018): 0x00000000 [2025-09-24 11:52:35.754] Write at address 0x00600018 (0xffff9d5a2018): 0x00400040, readback 0x00400040 [2025-09-24 11:52:35.754] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:52:35.770] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:52:35.962] Loaded PowerVR consumer services. [2025-09-24 11:52:36.042] Waiting data available... [2025-09-24 11:52:36.073] 512+0 records in [2025-09-24 11:52:36.073] 512+0 records out [2025-09-24 11:52:36.105] Starting syslogd/klogd: done [2025-09-24 11:52:36.121] DML Start [2025-09-24 11:52:36.313] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:52:36.537] DML res1: 0 [2025-09-24 11:52:36.979] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:52:36.979] Read Success [2025-09-24 11:52:36.979] Verifying certificate... [2025-09-24 11:52:37.219] Verified OK [2025-09-24 11:52:37.235] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:52:38.973] Verified OK [2025-09-24 11:52:38.973] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:52:39.511] Verified OK [2025-09-24 11:52:39.511] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:52:42.021] fs.protected_hardlinks = 1 [2025-09-24 11:52:42.037] fs.protected_symlinks = 1 [2025-09-24 11:52:42.037] kernel.modules_disabled = 1 [2025-09-24 11:52:42.245] [2025-09-24 11:52:42.245] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:52:43.539] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:52:51.291] SBL1:1210.0.1.0 [2025-09-24 11:52:51.339] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:52:52.906] SBL2:1210.0.1.0 [2025-09-24 11:52:52.954] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:52:53.066] j-A [2025-09-24 11:53:00.404] The R5 Autosar Classic is running [2025-09-24 11:53:00.429] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:53:00.429] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:53:01.037] INIT: version 2.96 booting [2025-09-24 11:53:01.149] INIT: Entering runlevel: 5 [2025-09-24 11:53:01.293] mtd24 attached [2025-09-24 11:53:01.309] mtd28 attached [2025-09-24 11:53:01.325] mtd32 attached [2025-09-24 11:53:01.341] ubi0:textures is mounted. [2025-09-24 11:53:01.373] ubi1:animations is mounted. [2025-09-24 11:53:01.373] RTNETLINK answers: File exists [2025-09-24 11:53:01.432] ubi2:dml_code is mounted. [2025-09-24 11:53:01.432] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:53:01.432] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:53:01.432] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:53:01.432] data.LB_FadeInType0=100 [2025-09-24 11:53:01.432] data.CHLH_FadeInType0=0 [2025-09-24 11:53:01.432] data.WU_FadeInDelay=0 [2025-09-24 11:53:01.432] max_time_out=0 [2025-09-24 11:53:01.432] No splash screen [2025-09-24 11:53:01.432] stop dss Done [2025-09-24 11:53:01.432] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:53:01.432] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:53:01.463] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:53:01.479] /dev/mem opened. [2025-09-24 11:53:01.479] Memory mapped at address 0xffff9c364000. [2025-09-24 11:53:01.511] Read at address 0x00600018 (0xffff9c364018): 0x00000000 [2025-09-24 11:53:01.511] Write at address 0x00600018 (0xffff9c364018): 0x00400040, readback 0x00400040 [2025-09-24 11:53:01.511] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:53:01.575] Loaded PowerVR consumer services. [2025-09-24 11:53:01.783] Waiting data available... [2025-09-24 11:53:01.799] 512+0 records in [2025-09-24 11:53:01.799] 512+0 records out [2025-09-24 11:53:01.847] Starting syslogd/klogd: done [2025-09-24 11:53:01.863] DML Start [2025-09-24 11:53:02.039] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:53:02.278] DML res1: 0 [2025-09-24 11:53:02.711] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:53:02.731] Read Success [2025-09-24 11:53:02.731] Verifying certificate... [2025-09-24 11:53:02.971] Verified OK [2025-09-24 11:53:02.987] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:53:04.602] Verified OK [2025-09-24 11:53:04.602] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:53:05.238] Verified OK [2025-09-24 11:53:05.238] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:53:07.780] fs.protected_hardlinks = 1 [2025-09-24 11:53:07.796] fs.protected_symlinks = 1 [2025-09-24 11:53:07.796] kernel.modules_disabled = 1 [2025-09-24 11:53:07.988] [2025-09-24 11:53:07.988] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:53:09.261] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:53:17.051] SBL1:1210.0.1.0 [2025-09-24 11:53:17.082] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:53:18.665] SBL2:1210.0.1.0 [2025-09-24 11:53:18.697] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:53:18.809] j-A [2025-09-24 11:53:26.182] The R5 Autosar Classic is running [2025-09-24 11:53:26.182] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:53:26.182] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:53:26.790] INIT: version 2.96 booting [2025-09-24 11:53:26.901] INIT: Entering runlevel: 5 [2025-09-24 11:53:27.046] mtd24 attached [2025-09-24 11:53:27.061] mtd28 attached [2025-09-24 11:53:27.077] mtd32 attached [2025-09-24 11:53:27.109] ubi0:textures is mounted. [2025-09-24 11:53:27.125] RTNETLINK answers: File exists [2025-09-24 11:53:27.180] ubi1:animations is mounted. [2025-09-24 11:53:27.180] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:53:27.180] ubi2:dml_code is mounted. [2025-09-24 11:53:27.180] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:53:27.180] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:53:27.180] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:53:27.180] data.LB_FadeInType0=100 [2025-09-24 11:53:27.180] data.CHLH_FadeInType0=0 [2025-09-24 11:53:27.180] data.WU_FadeInDelay=0 [2025-09-24 11:53:27.180] max_time_out=0 [2025-09-24 11:53:27.180] No splash screen [2025-09-24 11:53:27.180] stop dss Done [2025-09-24 11:53:27.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:53:27.228] /dev/mem opened. [2025-09-24 11:53:27.228] Memory mapped at address 0xffffbd12f000. [2025-09-24 11:53:27.260] Read at address 0x00600018 (0xffffbd12f018): 0x00000000 [2025-09-24 11:53:27.260] Write at address 0x00600018 (0xffffbd12f018): 0x00400040, readback 0x00400040 [2025-09-24 11:53:27.260] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:53:27.260] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:53:27.516] Loaded PowerVR consumer services. [2025-09-24 11:53:27.516] Waiting data available... [2025-09-24 11:53:27.564] 512+0 records in [2025-09-24 11:53:27.564] 512+0 records out [2025-09-24 11:53:27.596] Starting syslogd/klogd: done [2025-09-24 11:53:27.612] DML Start [2025-09-24 11:53:27.804] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:53:28.012] DML res1: 0 [2025-09-24 11:53:28.427] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:53:28.443] Read Success [2025-09-24 11:53:28.443] Verifying certificate... [2025-09-24 11:53:28.683] Verified OK [2025-09-24 11:53:28.699] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:53:30.314] Verified OK [2025-09-24 11:53:30.314] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:53:30.867] Verified OK [2025-09-24 11:53:30.867] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:53:33.601] fs.protected_hardlinks = 1 [2025-09-24 11:53:33.601] fs.protected_symlinks = 1 [2025-09-24 11:53:33.617] kernel.modules_disabled = 1 [2025-09-24 11:53:33.809] [2025-09-24 11:53:33.809] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:53:35.017] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:53:42.767] SBL1:1210.0.1.0 [2025-09-24 11:53:42.815] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:53:44.382] SBL2:1210.0.1.0 [2025-09-24 11:53:44.430] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:53:44.542] j-A [2025-09-24 11:53:51.915] The R5 Autosar Classic is running [2025-09-24 11:53:51.915] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:53:51.915] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:53:52.522] INIT: version 2.96 booting [2025-09-24 11:53:52.633] INIT: Entering runlevel: 5 [2025-09-24 11:53:52.794] mtd32 attached [2025-09-24 11:53:52.794] mtd28 attached [2025-09-24 11:53:52.810] mtd24 attached [2025-09-24 11:53:52.842] ubi0:dml_code is mounted. [2025-09-24 11:53:52.858] ubi1:animations is mounted. [2025-09-24 11:53:52.858] RTNETLINK answers: File exists [2025-09-24 11:53:52.921] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:53:52.921] ubi2:textures is mounted. [2025-09-24 11:53:52.921] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:53:52.921] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:53:52.921] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:53:52.921] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:53:52.921] data.LB_FadeInType0=100 [2025-09-24 11:53:52.921] data.CHLH_FadeInType0=0 [2025-09-24 11:53:52.921] data.WU_FadeInDelay=0 [2025-09-24 11:53:52.921] max_time_out=0 [2025-09-24 11:53:52.921] No splash screen [2025-09-24 11:53:52.921] stop dss Done [2025-09-24 11:53:53.013] /dev/mem opened. [2025-09-24 11:53:53.013] Memory mapped at address 0xffffbebf3000. [2025-09-24 11:53:53.013] Read at address 0x00600018 (0xffffbebf3018): 0x00000000 [2025-09-24 11:53:53.013] Write at address 0x00600018 (0xffffbebf3018): 0x00400040, readback 0x00400040 [2025-09-24 11:53:53.013] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:53:53.013] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:53:53.108] Loaded PowerVR consumer services. [2025-09-24 11:53:53.269] Waiting data available... [2025-09-24 11:53:53.285] 512+0 records in [2025-09-24 11:53:53.285] 512+0 records out [2025-09-24 11:53:53.317] Starting syslogd/klogd: done [2025-09-24 11:53:53.333] DML Start [2025-09-24 11:53:53.508] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:53:53.732] DML res1: 0 [2025-09-24 11:53:54.173] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:53:54.173] Read Success [2025-09-24 11:53:54.173] Verifying certificate... [2025-09-24 11:53:54.462] Verified OK [2025-09-24 11:53:54.478] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:53:56.120] Verified OK [2025-09-24 11:53:56.120] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:53:56.702] Verified OK [2025-09-24 11:53:56.702] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:53:59.388] fs.protected_hardlinks = 1 [2025-09-24 11:53:59.388] fs.protected_symlinks = 1 [2025-09-24 11:53:59.404] kernel.modules_disabled = 1 [2025-09-24 11:53:59.579] [2025-09-24 11:53:59.579] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:54:00.755] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:54:08.528] SBL1:1210.0.1.0 [2025-09-24 11:54:08.576] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:54:10.143] SBL2:1210.0.1.0 [2025-09-24 11:54:10.191] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:54:10.288] j-A [2025-09-24 11:54:17.644] The R5 Autosar Classic is running [2025-09-24 11:54:17.668] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:54:17.668] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:54:18.275] INIT: version 2.96 booting [2025-09-24 11:54:18.387] INIT: Entering runlevel: 5 [2025-09-24 11:54:18.546] mtd32 attached [2025-09-24 11:54:18.546] mtd24 attached [2025-09-24 11:54:18.562] mtd28 attached [2025-09-24 11:54:18.611] RTNETLINK answers: File exists [2025-09-24 11:54:18.676] ubi0:dml_code is mounted. [2025-09-24 11:54:18.676] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:54:18.676] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:54:18.676] ubi1:textures is mounted. [2025-09-24 11:54:18.676] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:54:18.676] ubi2:animations is mounted. [2025-09-24 11:54:18.676] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:54:18.676] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:54:18.676] data.LB_FadeInType0=100 [2025-09-24 11:54:18.676] data.CHLH_FadeInType0=0 [2025-09-24 11:54:18.676] data.WU_FadeInDelay=0 [2025-09-24 11:54:18.676] max_time_out=0 [2025-09-24 11:54:18.676] No splash screen [2025-09-24 11:54:18.676] stop dss Done [2025-09-24 11:54:18.723] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:54:18.723] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:54:18.756] /dev/mem opened. [2025-09-24 11:54:18.756] Memory mapped at address 0xffff80488000. [2025-09-24 11:54:18.756] Read at address 0x00600018 (0xffff80488018): 0x00000000 [2025-09-24 11:54:18.756] Write at address 0x00600018 (0xffff80488018): 0x00400040, readback 0x00400040 [2025-09-24 11:54:18.835] Loaded PowerVR consumer services. [2025-09-24 11:54:19.012] Waiting data available... [2025-09-24 11:54:19.044] 512+0 records in [2025-09-24 11:54:19.044] 512+0 records out [2025-09-24 11:54:19.076] Starting syslogd/klogd: done [2025-09-24 11:54:19.092] DML Start [2025-09-24 11:54:19.267] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:54:19.491] DML res1: 0 [2025-09-24 11:54:19.961] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:54:19.961] Read Success [2025-09-24 11:54:19.961] Verifying certificate... [2025-09-24 11:54:20.217] Verified OK [2025-09-24 11:54:20.233] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:54:21.991] Verified OK [2025-09-24 11:54:22.008] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:54:22.530] Verified OK [2025-09-24 11:54:22.530] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:54:25.054] fs.protected_hardlinks = 1 [2025-09-24 11:54:25.054] fs.protected_symlinks = 1 [2025-09-24 11:54:25.054] kernel.modules_disabled = 1 [2025-09-24 11:54:25.230] [2025-09-24 11:54:25.230] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:54:26.514] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:54:34.267] SBL1:1210.0.1.0 [2025-09-24 11:54:34.314] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:54:35.881] SBL2:1210.0.1.0 [2025-09-24 11:54:35.929] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:54:36.026] j-A [2025-09-24 11:54:43.381] The R5 Autosar Classic is running [2025-09-24 11:54:43.405] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:54:43.405] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:54:44.013] INIT: version 2.96 booting [2025-09-24 11:54:44.124] INIT: Entering runlevel: 5 [2025-09-24 11:54:44.284] mtd28 attached [2025-09-24 11:54:44.284] mtd32 attached [2025-09-24 11:54:44.300] mtd24 attached [2025-09-24 11:54:44.348] ubi0:animations is mounted. [2025-09-24 11:54:44.348] RTNETLINK answers: File exists [2025-09-24 11:54:44.399] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:54:44.399] ubi1:dml_code is mounted. [2025-09-24 11:54:44.399] ubi2:textures is mounted. [2025-09-24 11:54:44.399] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:54:44.399] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:54:44.399] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:54:44.399] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:54:44.399] data.LB_FadeInType0=100 [2025-09-24 11:54:44.399] data.CHLH_FadeInType0=0 [2025-09-24 11:54:44.399] data.WU_FadeInDelay=0 [2025-09-24 11:54:44.399] max_time_out=0 [2025-09-24 11:54:44.399] No splash screen [2025-09-24 11:54:44.399] stop dss Done [2025-09-24 11:54:44.483] /dev/mem opened. [2025-09-24 11:54:44.483] Memory mapped at address 0xffffa313d000. [2025-09-24 11:54:44.483] Read at address 0x00600018 (0xffffa313d018): 0x00000000 [2025-09-24 11:54:44.483] Write at address 0x00600018 (0xffffa313d018): 0x00400040, readback 0x00400040 [2025-09-24 11:54:44.483] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:54:44.483] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:54:44.578] Loaded PowerVR consumer services. [2025-09-24 11:54:44.754] Waiting data available... [2025-09-24 11:54:44.771] 512+0 records in [2025-09-24 11:54:44.771] 512+0 records out [2025-09-24 11:54:44.803] Starting syslogd/klogd: done [2025-09-24 11:54:44.819] DML Start [2025-09-24 11:54:44.994] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:54:45.202] DML res1: 0 [2025-09-24 11:54:45.673] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:54:45.673] Read Success [2025-09-24 11:54:45.673] Verifying certificate... [2025-09-24 11:54:45.913] Verified OK [2025-09-24 11:54:45.929] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:54:47.623] Verified OK [2025-09-24 11:54:47.623] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:54:48.192] Verified OK [2025-09-24 11:54:48.192] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:54:50.683] fs.protected_hardlinks = 1 [2025-09-24 11:54:50.683] fs.protected_symlinks = 1 [2025-09-24 11:54:50.683] kernel.modules_disabled = 1 [2025-09-24 11:54:50.875] [2025-09-24 11:54:50.875] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:54:52.255] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:55:00.021] SBL1:1210.0.1.0 [2025-09-24 11:55:00.053] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:55:01.636] SBL2:1210.0.1.0 [2025-09-24 11:55:01.668] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 11:55:01.781] j-A [2025-09-24 11:55:09.155] The R5 Autosar Classic is running [2025-09-24 11:55:09.155] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:55:09.155] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:55:09.763] INIT: version 2.96 booting [2025-09-24 11:55:09.874] INIT: Entering runlevel: 5 [2025-09-24 11:55:10.018] mtd28 attached [2025-09-24 11:55:10.034] mtd24 attached [2025-09-24 11:55:10.050] mtd32 attached [2025-09-24 11:55:10.066] ubi0:animations is mounted. [2025-09-24 11:55:10.098] RTNETLINK answers: File exists [2025-09-24 11:55:10.156] ubi1:textures is mounted. [2025-09-24 11:55:10.156] ubi2:dml_code is mounted. [2025-09-24 11:55:10.156] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:55:10.156] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:55:10.156] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:55:10.156] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:55:10.156] data.LB_FadeInType0=100 [2025-09-24 11:55:10.156] data.CHLH_FadeInType0=0 [2025-09-24 11:55:10.156] data.WU_FadeInDelay=0 [2025-09-24 11:55:10.156] max_time_out=0 [2025-09-24 11:55:10.156] No splash screen [2025-09-24 11:55:10.156] stop dss Done [2025-09-24 11:55:10.156] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:55:10.188] /dev/mem opened. [2025-09-24 11:55:10.214] Memory mapped at address 0xffff8ca36000. [2025-09-24 11:55:10.214] Read at address 0x00600018 (0xffff8ca36018): 0x00000000 [2025-09-24 11:55:10.214] Write at address 0x00600018 (0xffff8ca36018): 0x00400040, readback 0x00400040 [2025-09-24 11:55:10.259] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:55:10.259] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:55:10.339] Loaded PowerVR consumer services. [2025-09-24 11:55:10.499] Waiting data available... [2025-09-24 11:55:10.531] 512+0 records in [2025-09-24 11:55:10.531] 512+0 records out [2025-09-24 11:55:10.579] Starting syslogd/klogd: done [2025-09-24 11:55:10.595] DML Start [2025-09-24 11:55:10.787] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:55:10.994] DML res1: 0 [2025-09-24 11:55:11.419] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:55:11.419] Read Success [2025-09-24 11:55:11.419] Verifying certificate... [2025-09-24 11:55:11.643] Verified OK [2025-09-24 11:55:11.659] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:55:13.348] Verified OK [2025-09-24 11:55:13.348] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:55:13.993] Verified OK [2025-09-24 11:55:13.993] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:55:16.552] fs.protected_hardlinks = 1 [2025-09-24 11:55:16.552] fs.protected_symlinks = 1 [2025-09-24 11:55:16.568] kernel.modules_disabled = 1 [2025-09-24 11:55:16.759] [2025-09-24 11:55:16.759] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:55:18.020] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:55:25.779] SBL1:1210.0.1.0 [2025-09-24 11:55:25.827] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:55:27.394] SBL2:1210.0.1.0 [2025-09-24 11:55:27.442] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:55:27.553] j-A [2025-09-24 11:55:34.926] The R5 Autosar Classic is running [2025-09-24 11:55:34.926] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:55:34.926] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:55:35.534] INIT: version 2.96 booting [2025-09-24 11:55:35.646] INIT: Entering runlevel: 5 [2025-09-24 11:55:35.806] mtd28 attached [2025-09-24 11:55:35.806] mtd32 attached [2025-09-24 11:55:35.822] mtd24 attached [2025-09-24 11:55:35.869] RTNETLINK answers: File exists [2025-09-24 11:55:35.937] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:55:35.937] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:55:35.937] ubi1:dml_code is mounted. [2025-09-24 11:55:35.937] ubi0:animations is mounted. [2025-09-24 11:55:35.937] ubi2:textures is mounted. [2025-09-24 11:55:35.937] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:55:35.937] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:55:35.937] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:55:35.937] data.LB_FadeInType0=100 [2025-09-24 11:55:35.937] data.CHLH_FadeInType0=0 [2025-09-24 11:55:35.937] data.WU_FadeInDelay=0 [2025-09-24 11:55:35.937] max_time_out=0 [2025-09-24 11:55:35.937] No splash screen [2025-09-24 11:55:35.937] stop dss Done [2025-09-24 11:55:36.004] /dev/mem opened. [2025-09-24 11:55:36.004] Memory mapped at address 0xffffa2373000. [2025-09-24 11:55:36.004] Read at address 0x00600018 (0xffffa2373018): 0x00000000 [2025-09-24 11:55:36.004] Write at address 0x00600018 (0xffffa2373018): 0x00400040, readback 0x00400040 [2025-09-24 11:55:36.036] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:55:36.036] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:55:36.211] Loaded PowerVR consumer services. [2025-09-24 11:55:36.308] Waiting data available... [2025-09-24 11:55:36.324] 512+0 records in [2025-09-24 11:55:36.340] 512+0 records out [2025-09-24 11:55:36.356] Starting syslogd/klogd: done [2025-09-24 11:55:36.372] DML Start [2025-09-24 11:55:36.515] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:55:36.692] DML res1: 0 [2025-09-24 11:55:37.260] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:55:37.260] Read Success [2025-09-24 11:55:37.260] Verifying certificate... [2025-09-24 11:55:37.484] Verified OK [2025-09-24 11:55:37.500] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:55:39.120] Verified OK [2025-09-24 11:55:39.120] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:55:39.727] Verified OK [2025-09-24 11:55:39.749] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:55:42.307] fs.protected_hardlinks = 1 [2025-09-24 11:55:42.323] fs.protected_symlinks = 1 [2025-09-24 11:55:42.339] kernel.modules_disabled = 1 [2025-09-24 11:55:42.547] [2025-09-24 11:55:42.547] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:55:43.799] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:55:51.526] SBL1:1210.0.1.0 [2025-09-24 11:55:51.574] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:55:53.157] SBL2:1210.0.1.0 [2025-09-24 11:55:53.189] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:55:53.300] j-A [2025-09-24 11:56:00.674] The R5 Autosar Classic is running [2025-09-24 11:56:00.674] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:56:00.674] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:56:01.281] INIT: version 2.96 booting [2025-09-24 11:56:01.393] INIT: Entering runlevel: 5 [2025-09-24 11:56:01.537] mtd28 attached [2025-09-24 11:56:01.553] mtd32 attached [2025-09-24 11:56:01.569] mtd24 attached [2025-09-24 11:56:01.654] ubi0:animations is mounted. [2025-09-24 11:56:01.654] RTNETLINK answers: File exists [2025-09-24 11:56:01.654] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:56:01.654] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:56:01.654] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:56:01.654] ubi2:textures is mounted. [2025-09-24 11:56:01.654] ubi1:dml_code is mounted. [2025-09-24 11:56:01.654] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:56:01.654] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:56:01.654] data.LB_FadeInType0=100 [2025-09-24 11:56:01.675] data.CHLH_FadeInType0=0 [2025-09-24 11:56:01.675] data.WU_FadeInDelay=0 [2025-09-24 11:56:01.675] max_time_out=0 [2025-09-24 11:56:01.675] No splash screen [2025-09-24 11:56:01.675] stop dss Done [2025-09-24 11:56:01.759] /dev/mem opened. [2025-09-24 11:56:01.759] Memory mapped at address 0xffffa7ddf000. [2025-09-24 11:56:01.759] Read at address 0x00600018 (0xffffa7ddf018): 0x00000000 [2025-09-24 11:56:01.759] Write at address 0x00600018 (0xffffa7ddf018): 0x00400040, readback 0x00400040 [2025-09-24 11:56:01.759] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:56:01.774] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:56:01.950] Loaded PowerVR consumer services. [2025-09-24 11:56:02.046] Waiting data available... [2025-09-24 11:56:02.062] 512+0 records in [2025-09-24 11:56:02.062] 512+0 records out [2025-09-24 11:56:02.093] Starting syslogd/klogd: done [2025-09-24 11:56:02.109] DML Start [2025-09-24 11:56:02.270] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:56:02.526] DML res1: 0 [2025-09-24 11:56:02.893] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:56:02.915] Read Success [2025-09-24 11:56:02.915] Verifying certificate... [2025-09-24 11:56:03.202] Verified OK [2025-09-24 11:56:03.218] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:56:04.928] Verified OK [2025-09-24 11:56:04.928] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:56:05.487] Verified OK [2025-09-24 11:56:05.487] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:56:08.030] fs.protected_hardlinks = 1 [2025-09-24 11:56:08.030] fs.protected_symlinks = 1 [2025-09-24 11:56:08.046] kernel.modules_disabled = 1 [2025-09-24 11:56:08.222] [2025-09-24 11:56:08.222] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:56:09.549] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:56:17.271] SBL1:1210.0.1.0 [2025-09-24 11:56:17.319] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:56:18.886] SBL2:1210.0.1.0 [2025-09-24 11:56:18.934] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:56:19.046] j-A [2025-09-24 11:56:26.385] The R5 Autosar Classic is running [2025-09-24 11:56:26.410] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:56:26.410] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:56:27.018] INIT: version 2.96 booting [2025-09-24 11:56:27.129] INIT: Entering runlevel: 5 [2025-09-24 11:56:27.274] mtd24 attached [2025-09-24 11:56:27.289] mtd28 attached [2025-09-24 11:56:27.306] mtd32 attached [2025-09-24 11:56:27.412] RTNETLINK answers: File exists [2025-09-24 11:56:27.412] ubi0:textures is mounted. [2025-09-24 11:56:27.412] ubi1:animations is mounted. [2025-09-24 11:56:27.412] ubi2:dml_code is mounted. [2025-09-24 11:56:27.412] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:56:27.412] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:56:27.412] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:56:27.412] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:56:27.412] data.LB_FadeInType0=100 [2025-09-24 11:56:27.412] data.CHLH_FadeInType0=0 [2025-09-24 11:56:27.412] data.WU_FadeInDelay=0 [2025-09-24 11:56:27.412] max_time_out=0 [2025-09-24 11:56:27.412] No splash screen [2025-09-24 11:56:27.412] stop dss Done [2025-09-24 11:56:27.412] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:56:27.460] /dev/mem opened. [2025-09-24 11:56:27.460] Memory mapped at address 0xffff8efd8000. [2025-09-24 11:56:27.487] Read at address 0x00600018 (0xffff8efd8018): 0x00000000 [2025-09-24 11:56:27.487] Write at address 0x00600018 (0xffff8efd8018): 0x00400040, readback 0x00400040 [2025-09-24 11:56:27.503] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:56:27.528] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:56:27.607] Loaded PowerVR consumer services. [2025-09-24 11:56:27.768] Waiting data available... [2025-09-24 11:56:27.800] 512+0 records in [2025-09-24 11:56:27.800] 512+0 records out [2025-09-24 11:56:27.831] Starting syslogd/klogd: done [2025-09-24 11:56:27.847] DML Start [2025-09-24 11:56:28.071] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:56:28.295] DML res1: 0 [2025-09-24 11:56:28.701] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:56:28.701] Read Success [2025-09-24 11:56:28.701] Verifying certificate... [2025-09-24 11:56:28.925] Verified OK [2025-09-24 11:56:28.941] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:56:30.699] Verified OK [2025-09-24 11:56:30.699] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:56:31.275] Verified OK [2025-09-24 11:56:31.296] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:56:33.774] fs.protected_hardlinks = 1 [2025-09-24 11:56:33.790] fs.protected_symlinks = 1 [2025-09-24 11:56:33.790] kernel.modules_disabled = 1 [2025-09-24 11:56:33.999] [2025-09-24 11:56:33.999] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:56:35.323] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:56:43.011] SBL1:1210.0.1.0 [2025-09-24 11:56:43.042] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:56:44.625] SBL2:1210.0.1.0 [2025-09-24 11:56:44.657] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:56:44.769] j-A [2025-09-24 11:56:52.123] The R5 Autosar Classic is running [2025-09-24 11:56:52.123] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:56:52.144] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:56:52.752] INIT: version 2.96 booting [2025-09-24 11:56:52.864] INIT: Entering runlevel: 5 [2025-09-24 11:56:53.008] mtd24 attached [2025-09-24 11:56:53.024] mtd28 attached [2025-09-24 11:56:53.040] mtd32 attached [2025-09-24 11:56:53.056] ubi0:textures is mounted. [2025-09-24 11:56:53.088] RTNETLINK answers: File exists [2025-09-24 11:56:53.088] ubi1:animations is mounted. [2025-09-24 11:56:53.147] ubi2:dml_code is mounted. [2025-09-24 11:56:53.147] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:56:53.147] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:56:53.147] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:56:53.147] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:56:53.147] data.LB_FadeInType0=100 [2025-09-24 11:56:53.147] data.CHLH_FadeInType0=0 [2025-09-24 11:56:53.147] data.WU_FadeInDelay=0 [2025-09-24 11:56:53.147] max_time_out=0 [2025-09-24 11:56:53.147] No splash screen [2025-09-24 11:56:53.147] stop dss Done [2025-09-24 11:56:53.147] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:56:53.189] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:56:53.189] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:56:53.189] /dev/mem opened. [2025-09-24 11:56:53.189] Memory mapped at address 0xffffa2cea000. [2025-09-24 11:56:53.214] Read at address 0x00600018 (0xffffa2cea018): 0x00000000 [2025-09-24 11:56:53.215] Write at address 0x00600018 (0xffffa2cea018): 0x00400040, readback 0x00400040 [2025-09-24 11:56:53.486] Loaded PowerVR consumer services. [2025-09-24 11:56:53.502] Waiting data available... [2025-09-24 11:56:53.534] 512+0 records in [2025-09-24 11:56:53.550] 512+0 records out [2025-09-24 11:56:53.582] Starting syslogd/klogd: done [2025-09-24 11:56:53.598] DML Start [2025-09-24 11:56:53.742] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:56:53.950] DML res1: 0 [2025-09-24 11:56:54.494] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:56:54.509] Read Success [2025-09-24 11:56:54.509] Verifying certificate... [2025-09-24 11:56:54.749] Verified OK [2025-09-24 11:56:54.766] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:56:56.356] Verified OK [2025-09-24 11:56:56.356] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:56:56.928] Verified OK [2025-09-24 11:56:56.928] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:56:59.599] fs.protected_hardlinks = 1 [2025-09-24 11:56:59.627] fs.protected_symlinks = 1 [2025-09-24 11:56:59.627] kernel.modules_disabled = 1 [2025-09-24 11:56:59.803] [2025-09-24 11:56:59.803] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:57:01.021] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:57:08.745] SBL1:1210.0.1.0 [2025-09-24 11:57:08.777] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:57:10.360] SBL2:1210.0.1.0 [2025-09-24 11:57:10.408] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:57:10.504] j-A [2025-09-24 11:57:17.859] The R5 Autosar Classic is running [2025-09-24 11:57:17.881] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:57:17.881] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:57:18.488] INIT: version 2.96 booting [2025-09-24 11:57:18.600] INIT: Entering runlevel: 5 [2025-09-24 11:57:18.760] mtd28 attached [2025-09-24 11:57:18.776] mtd32 attached [2025-09-24 11:57:18.776] mtd24 attached [2025-09-24 11:57:18.808] ubi0:animations is mounted. [2025-09-24 11:57:18.890] RTNETLINK answers: File exists [2025-09-24 11:57:18.890] ubi2:textures is mounted. [2025-09-24 11:57:18.890] ubi1:dml_code is mounted. [2025-09-24 11:57:18.890] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:57:18.890] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:57:18.890] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:57:18.890] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:57:18.890] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:57:18.890] data.LB_FadeInType0=100 [2025-09-24 11:57:18.890] data.CHLH_FadeInType0=0 [2025-09-24 11:57:18.890] data.WU_FadeInDelay=0 [2025-09-24 11:57:18.890] max_time_out=0 [2025-09-24 11:57:18.890] No splash screen [2025-09-24 11:57:18.890] stop dss Done [2025-09-24 11:57:18.950] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:57:18.950] /dev/mem opened. [2025-09-24 11:57:18.950] Memory mapped at address 0xffffa1e0a000. [2025-09-24 11:57:18.950] Read at address 0x00600018 (0xffffa1e0a018): 0x00000000 [2025-09-24 11:57:18.950] Write at address 0x00600018 (0xffffa1e0a018): 0x00400040, readback 0x00400040 [2025-09-24 11:57:18.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:57:19.094] Loaded PowerVR consumer services. [2025-09-24 11:57:19.239] Waiting data available... [2025-09-24 11:57:19.270] 512+0 records in [2025-09-24 11:57:19.270] 512+0 records out [2025-09-24 11:57:19.286] Starting syslogd/klogd: done [2025-09-24 11:57:19.318] DML Start [2025-09-24 11:57:19.479] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:57:19.670] DML res1: 0 [2025-09-24 11:57:20.206] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:57:20.206] Read Success [2025-09-24 11:57:20.206] Verifying certificate... [2025-09-24 11:57:20.461] Verified OK [2025-09-24 11:57:20.477] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:57:22.236] Verified OK [2025-09-24 11:57:22.236] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:57:22.716] Verified OK [2025-09-24 11:57:22.737] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:57:25.199] fs.protected_hardlinks = 1 [2025-09-24 11:57:25.199] fs.protected_symlinks = 1 [2025-09-24 11:57:25.215] kernel.modules_disabled = 1 [2025-09-24 11:57:25.408] [2025-09-24 11:57:25.408] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:57:26.727] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:57:34.480] SBL1:1210.0.1.0 [2025-09-24 11:57:34.528] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:57:36.094] SBL2:1210.0.1.0 [2025-09-24 11:57:36.142] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:57:36.255] j-A [2025-09-24 11:57:43.593] The R5 Autosar Classic is running [2025-09-24 11:57:43.624] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:57:43.624] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:57:44.232] INIT: version 2.96 booting [2025-09-24 11:57:44.328] INIT: Entering runlevel: 5 [2025-09-24 11:57:44.488] mtd32 attached [2025-09-24 11:57:44.504] mtd24 attached [2025-09-24 11:57:44.504] mtd28 attached [2025-09-24 11:57:44.536] ubi0:dml_code is mounted. [2025-09-24 11:57:44.599] RTNETLINK answers: File exists [2025-09-24 11:57:44.599] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:57:44.599] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:57:44.599] ubi2:animations is mounted. [2025-09-24 11:57:44.599] ubi1:textures is mounted. [2025-09-24 11:57:44.599] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:57:44.599] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:57:44.599] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:57:44.624] data.LB_FadeInType0=100 [2025-09-24 11:57:44.624] data.CHLH_FadeInType0=0 [2025-09-24 11:57:44.624] data.WU_FadeInDelay=0 [2025-09-24 11:57:44.624] max_time_out=0 [2025-09-24 11:57:44.624] No splash screen [2025-09-24 11:57:44.624] stop dss Done [2025-09-24 11:57:44.640] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:57:44.656] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:57:44.707] /dev/mem opened. [2025-09-24 11:57:44.707] Memory mapped at address 0xffffa146a000. [2025-09-24 11:57:44.707] Read at address 0x00600018 (0xffffa146a018): 0x00000000 [2025-09-24 11:57:44.707] Write at address 0x00600018 (0xffffa146a018): 0x00400040, readback 0x00400040 [2025-09-24 11:57:44.786] Loaded PowerVR consumer services. [2025-09-24 11:57:44.978] Waiting data available... [2025-09-24 11:57:44.994] 512+0 records in [2025-09-24 11:57:44.994] 512+0 records out [2025-09-24 11:57:45.042] Starting syslogd/klogd: done [2025-09-24 11:57:45.042] DML Start [2025-09-24 11:57:45.202] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:57:45.378] DML res1: 0 [2025-09-24 11:57:45.959] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:57:45.959] Read Success [2025-09-24 11:57:45.959] Verifying certificate... [2025-09-24 11:57:46.215] Verified OK [2025-09-24 11:57:46.247] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:57:48.003] Verified OK [2025-09-24 11:57:48.003] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:57:48.576] Verified OK [2025-09-24 11:57:48.576] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:57:51.038] fs.protected_hardlinks = 1 [2025-09-24 11:57:51.038] fs.protected_symlinks = 1 [2025-09-24 11:57:51.054] kernel.modules_disabled = 1 [2025-09-24 11:57:51.245] [2025-09-24 11:57:51.245] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:57:52.466] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:58:00.229] SBL1:1210.0.1.0 [2025-09-24 11:58:00.277] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:58:01.843] SBL2:1210.0.1.0 [2025-09-24 11:58:01.891] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:58:01.988] j-A [2025-09-24 11:58:09.343] The R5 Autosar Classic is running [2025-09-24 11:58:09.367] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:58:09.367] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:58:09.974] INIT: version 2.96 booting [2025-09-24 11:58:10.086] INIT: Entering runlevel: 5 [2025-09-24 11:58:10.246] mtd24 attached [2025-09-24 11:58:10.262] mtd32 attached [2025-09-24 11:58:10.262] mtd28 attached [2025-09-24 11:58:10.309] ubi0:textures is mounted. [2025-09-24 11:58:10.309] RTNETLINK answers: File exists [2025-09-24 11:58:10.368] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:58:10.368] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:58:10.368] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:58:10.368] ubi2:animations is mounted. [2025-09-24 11:58:10.368] ubi1:dml_code is mounted. [2025-09-24 11:58:10.368] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:58:10.368] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:58:10.368] data.LB_FadeInType0=100 [2025-09-24 11:58:10.368] data.CHLH_FadeInType0=0 [2025-09-24 11:58:10.368] data.WU_FadeInDelay=0 [2025-09-24 11:58:10.368] max_time_out=0 [2025-09-24 11:58:10.368] No splash screen [2025-09-24 11:58:10.368] stop dss Done [2025-09-24 11:58:10.443] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:58:10.443] /dev/mem opened. [2025-09-24 11:58:10.443] Memory mapped at address 0xffffbcc8e000. [2025-09-24 11:58:10.443] Read at address 0x00600018 (0xffffbcc8e018): 0x00000000 [2025-09-24 11:58:10.443] Write at address 0x00600018 (0xffffbcc8e018): 0x00400040, readback 0x00400040 [2025-09-24 11:58:10.443] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:58:10.539] Loaded PowerVR consumer services. [2025-09-24 11:58:10.715] Waiting data available... [2025-09-24 11:58:10.746] 512+0 records in [2025-09-24 11:58:10.746] 512+0 records out [2025-09-24 11:58:10.762] Starting syslogd/klogd: done [2025-09-24 11:58:10.778] DML Start [2025-09-24 11:58:10.971] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:58:11.210] DML res1: 0 [2025-09-24 11:58:11.639] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:58:11.639] Read Success [2025-09-24 11:58:11.639] Verifying certificate... [2025-09-24 11:58:11.879] Verified OK [2025-09-24 11:58:11.879] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:58:13.540] Verified OK [2025-09-24 11:58:13.540] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:58:14.124] Verified OK [2025-09-24 11:58:14.124] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:58:16.698] fs.protected_hardlinks = 1 [2025-09-24 11:58:16.714] fs.protected_symlinks = 1 [2025-09-24 11:58:16.714] kernel.modules_disabled = 1 [2025-09-24 11:58:16.906] [2025-09-24 11:58:16.906] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:58:18.205] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:58:25.991] SBL1:1210.0.1.0 [2025-09-24 11:58:26.039] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:58:27.606] SBL2:1210.0.1.0 [2025-09-24 11:58:27.654] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:58:27.749] j-A [2025-09-24 11:58:35.105] The R5 Autosar Classic is running [2025-09-24 11:58:35.128] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:58:35.128] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:58:35.735] INIT: version 2.96 booting [2025-09-24 11:58:35.848] INIT: Entering runlevel: 5 [2025-09-24 11:58:36.007] mtd24 attached [2025-09-24 11:58:36.007] mtd28 attached [2025-09-24 11:58:36.039] mtd32 attached [2025-09-24 11:58:36.039] ubi0:textures is mounted. [2025-09-24 11:58:36.072] RTNETLINK answers: File exists [2025-09-24 11:58:36.072] ubi1:animations is mounted. [2025-09-24 11:58:36.114] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:58:36.114] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:58:36.114] ubi2:dml_code is mounted. [2025-09-24 11:58:36.114] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:58:36.114] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:58:36.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:58:36.135] data.LB_FadeInType0=100 [2025-09-24 11:58:36.135] data.CHLH_FadeInType0=0 [2025-09-24 11:58:36.135] data.WU_FadeInDelay=0 [2025-09-24 11:58:36.135] max_time_out=0 [2025-09-24 11:58:36.135] No splash screen [2025-09-24 11:58:36.135] stop dss Done [2025-09-24 11:58:36.214] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:58:36.214] /dev/mem opened. [2025-09-24 11:58:36.214] Memory mapped at address 0xffff8814f000. [2025-09-24 11:58:36.214] Read at address 0x00600018 (0xffff8814f018): 0x00000000 [2025-09-24 11:58:36.214] Write at address 0x00600018 (0xffff8814f018): 0x00400040, readback 0x00400040 [2025-09-24 11:58:36.214] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:58:36.438] Loaded PowerVR consumer services. [2025-09-24 11:58:36.518] Waiting data available... [2025-09-24 11:58:36.550] 512+0 records in [2025-09-24 11:58:36.550] 512+0 records out [2025-09-24 11:58:36.582] Starting syslogd/klogd: done [2025-09-24 11:58:36.598] DML Start [2025-09-24 11:58:36.758] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:58:36.965] DML res1: 0 [2025-09-24 11:58:37.429] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:58:37.445] Read Success [2025-09-24 11:58:37.445] Verifying certificate... [2025-09-24 11:58:37.669] Verified OK [2025-09-24 11:58:37.685] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:58:39.263] Verified OK [2025-09-24 11:58:39.263] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:58:39.846] Verified OK [2025-09-24 11:58:39.846] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:58:42.484] fs.protected_hardlinks = 1 [2025-09-24 11:58:42.500] fs.protected_symlinks = 1 [2025-09-24 11:58:42.500] kernel.modules_disabled = 1 [2025-09-24 11:58:42.707] [2025-09-24 11:58:42.707] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:58:44.026] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:58:51.731] SBL1:1210.0.1.0 [2025-09-24 11:58:51.779] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:58:53.345] SBL2:1210.0.1.0 [2025-09-24 11:58:53.393] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:58:53.505] j-A [2025-09-24 11:59:00.878] The R5 Autosar Classic is running [2025-09-24 11:59:00.878] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:59:00.878] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:59:01.485] INIT: version 2.96 booting [2025-09-24 11:59:01.597] INIT: Entering runlevel: 5 [2025-09-24 11:59:01.740] mtd24 attached [2025-09-24 11:59:01.756] mtd28 attached [2025-09-24 11:59:01.772] mtd32 attached [2025-09-24 11:59:01.788] ubi0:textures is mounted. [2025-09-24 11:59:01.804] ubi1:animations is mounted. [2025-09-24 11:59:01.820] RTNETLINK answers: File exists [2025-09-24 11:59:01.847] ubi2:dml_code is mounted. [2025-09-24 11:59:01.847] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:59:01.847] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:59:01.883] data.LB_FadeInType0=100 [2025-09-24 11:59:01.883] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:59:01.883] data.CHLH_FadeInType0=0 [2025-09-24 11:59:01.883] data.WU_FadeInDelay=0 [2025-09-24 11:59:01.883] max_time_out=0 [2025-09-24 11:59:01.883] No splash screen [2025-09-24 11:59:01.883] stop dss Done [2025-09-24 11:59:01.883] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:59:01.883] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:59:01.956] /dev/mem opened. [2025-09-24 11:59:01.956] Memory mapped at address 0xffff9a923000. [2025-09-24 11:59:01.956] Read at address 0x00600018 (0xffff9a923018): 0x00000000 [2025-09-24 11:59:01.956] Write at address 0x00600018 (0xffff9a923018): 0x00400040, readback 0x00400040 [2025-09-24 11:59:01.972] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:59:01.972] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:59:02.164] Loaded PowerVR consumer services. [2025-09-24 11:59:02.243] Waiting data available... [2025-09-24 11:59:02.291] 512+0 records in [2025-09-24 11:59:02.291] 512+0 records out [2025-09-24 11:59:02.323] Starting syslogd/klogd: done [2025-09-24 11:59:02.339] DML Start [2025-09-24 11:59:02.548] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:59:02.772] DML res1: 0 [2025-09-24 11:59:03.123] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:59:03.147] Read Success [2025-09-24 11:59:03.147] Verifying certificate... [2025-09-24 11:59:03.418] Verified OK [2025-09-24 11:59:03.434] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:59:05.236] Verified OK [2025-09-24 11:59:05.236] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:59:05.786] Verified OK [2025-09-24 11:59:05.786] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:59:08.262] fs.protected_hardlinks = 1 [2025-09-24 11:59:08.262] fs.protected_symlinks = 1 [2025-09-24 11:59:08.262] kernel.modules_disabled = 1 [2025-09-24 11:59:08.470] [2025-09-24 11:59:08.470] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:59:09.781] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:59:17.532] SBL1:1210.0.1.0 [2025-09-24 11:59:17.581] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:59:19.147] SBL2:1210.0.1.0 [2025-09-24 11:59:19.196] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:59:19.308] j-A [2025-09-24 11:59:26.647] The R5 Autosar Classic is running [2025-09-24 11:59:26.672] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:59:26.672] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:59:27.280] INIT: version 2.96 booting [2025-09-24 11:59:27.392] INIT: Entering runlevel: 5 [2025-09-24 11:59:27.536] mtd24 attached [2025-09-24 11:59:27.552] mtd28 attached [2025-09-24 11:59:27.584] ubi0:textures is mounted. [2025-09-24 11:59:27.584] mtd32 attached [2025-09-24 11:59:27.615] ubi1:animations is mounted. [2025-09-24 11:59:27.615] RTNETLINK answers: File exists [2025-09-24 11:59:27.673] ubi2:dml_code is mounted. [2025-09-24 11:59:27.673] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:59:27.673] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:59:27.673] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:59:27.673] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:59:27.673] data.LB_FadeInType0=100 [2025-09-24 11:59:27.673] data.CHLH_FadeInType0=0 [2025-09-24 11:59:27.673] data.WU_FadeInDelay=0 [2025-09-24 11:59:27.673] max_time_out=0 [2025-09-24 11:59:27.673] No splash screen [2025-09-24 11:59:27.673] stop dss Done [2025-09-24 11:59:27.673] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:59:27.721] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:59:27.756] /dev/mem opened. [2025-09-24 11:59:27.756] Memory mapped at address 0xffff83190000. [2025-09-24 11:59:27.756] Read at address 0x00600018 (0xffff83190018): 0x00000000 [2025-09-24 11:59:27.756] Write at address 0x00600018 (0xffff83190018): 0x00400040, readback 0x00400040 [2025-09-24 11:59:27.756] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:59:27.869] Loaded PowerVR consumer services. [2025-09-24 11:59:28.028] Waiting data available... [2025-09-24 11:59:28.044] 512+0 records in [2025-09-24 11:59:28.044] 512+0 records out [2025-09-24 11:59:28.092] Starting syslogd/klogd: done [2025-09-24 11:59:28.108] DML Start [2025-09-24 11:59:28.285] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:59:28.540] DML res1: 0 [2025-09-24 11:59:28.979] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:59:28.979] Read Success [2025-09-24 11:59:28.979] Verifying certificate... [2025-09-24 11:59:29.219] Verified OK [2025-09-24 11:59:29.219] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:59:30.866] Verified OK [2025-09-24 11:59:30.886] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:59:31.500] Verified OK [2025-09-24 11:59:31.500] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:59:34.091] fs.protected_hardlinks = 1 [2025-09-24 11:59:34.106] fs.protected_symlinks = 1 [2025-09-24 11:59:34.106] kernel.modules_disabled = 1 [2025-09-24 11:59:34.297] [2025-09-24 11:59:34.297] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 11:59:35.558] RTNETLINK answers: Cannot assign requested address [2025-09-24 11:59:43.273] SBL1:1210.0.1.0 [2025-09-24 11:59:43.320] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:59:44.887] SBL2:1210.0.1.0 [2025-09-24 11:59:44.935] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 11:59:45.031] j-A [2025-09-24 11:59:52.386] The R5 Autosar Classic is running [2025-09-24 11:59:52.410] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 11:59:52.410] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 11:59:53.018] INIT: version 2.96 booting [2025-09-24 11:59:53.130] INIT: Entering runlevel: 5 [2025-09-24 11:59:53.290] mtd32 attached [2025-09-24 11:59:53.290] mtd24 attached [2025-09-24 11:59:53.306] mtd28 attached [2025-09-24 11:59:53.322] ubi0:dml_code is mounted. [2025-09-24 11:59:53.355] RTNETLINK answers: File exists [2025-09-24 11:59:53.391] ubi1:textures is mounted. [2025-09-24 11:59:53.391] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 11:59:53.391] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 11:59:53.391] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 11:59:53.391] ubi2:animations is mounted. [2025-09-24 11:59:53.391] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 11:59:53.391] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 11:59:53.421] data.LB_FadeInType0=100 [2025-09-24 11:59:53.421] data.CHLH_FadeInType0=0 [2025-09-24 11:59:53.421] data.WU_FadeInDelay=0 [2025-09-24 11:59:53.421] max_time_out=0 [2025-09-24 11:59:53.421] No splash screen [2025-09-24 11:59:53.421] stop dss Done [2025-09-24 11:59:53.468] /dev/mem opened. [2025-09-24 11:59:53.510] Memory mapped at address 0xffffad92e000. [2025-09-24 11:59:53.510] Read at address 0x00600018 (0xffffad92e018): 0x00000000 [2025-09-24 11:59:53.510] Write at address 0x00600018 (0xffffad92e018): 0x00400040, readback 0x00400040 [2025-09-24 11:59:53.510] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 11:59:53.510] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 11:59:53.606] Loaded PowerVR consumer services. [2025-09-24 11:59:53.766] Waiting data available... [2025-09-24 11:59:53.782] 512+0 records in [2025-09-24 11:59:53.782] 512+0 records out [2025-09-24 11:59:53.829] Starting syslogd/klogd: done [2025-09-24 11:59:53.845] DML Start [2025-09-24 11:59:54.022] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 11:59:54.198] DML res1: 0 [2025-09-24 11:59:54.677] Read DML Algo certificate (mtd31) and save to file [2025-09-24 11:59:54.693] Read Success [2025-09-24 11:59:54.693] Verifying certificate... [2025-09-24 11:59:54.917] Verified OK [2025-09-24 11:59:54.917] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 11:59:56.562] Verified OK [2025-09-24 11:59:56.562] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 11:59:57.138] Verified OK [2025-09-24 11:59:57.138] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 11:59:59.856] fs.protected_hardlinks = 1 [2025-09-24 11:59:59.872] fs.protected_symlinks = 1 [2025-09-24 11:59:59.872] kernel.modules_disabled = 1 [2025-09-24 12:00:00.080] [2025-09-24 12:00:00.080] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:00:01.266] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:00:09.027] SBL1:1210.0.1.0 [2025-09-24 12:00:09.059] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:00:10.642] SBL2:1210.0.1.0 [2025-09-24 12:00:10.674] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:00:10.785] j-A [2025-09-24 12:00:18.160] The R5 Autosar Classic is running [2025-09-24 12:00:18.160] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:00:18.160] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:00:18.767] INIT: version 2.96 booting [2025-09-24 12:00:18.879] INIT: Entering runlevel: 5 [2025-09-24 12:00:19.039] mtd32 attached [2025-09-24 12:00:19.054] mtd28 attached [2025-09-24 12:00:19.054] mtd24 attached [2025-09-24 12:00:19.103] ubi0:dml_code is mounted. [2025-09-24 12:00:19.103] RTNETLINK answers: File exists [2025-09-24 12:00:19.146] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:00:19.146] ubi1:animations is mounted. [2025-09-24 12:00:19.146] ubi2:textures is mounted. [2025-09-24 12:00:19.146] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:00:19.146] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:00:19.146] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:00:19.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:00:19.168] data.LB_FadeInType0=100 [2025-09-24 12:00:19.168] data.CHLH_FadeInType0=0 [2025-09-24 12:00:19.168] data.WU_FadeInDelay=0 [2025-09-24 12:00:19.168] max_time_out=0 [2025-09-24 12:00:19.168] No splash screen [2025-09-24 12:00:19.168] stop dss Done [2025-09-24 12:00:19.200] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:00:19.216] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:00:19.254] /dev/mem opened. [2025-09-24 12:00:19.254] Memory mapped at address 0xffffbbf65000. [2025-09-24 12:00:19.254] Read at address 0x00600018 (0xffffbbf65018): 0x00000000 [2025-09-24 12:00:19.254] Write at address 0x00600018 (0xffffbbf65018): 0x00400040, readback 0x00400040 [2025-09-24 12:00:19.334] Loaded PowerVR consumer services. [2025-09-24 12:00:19.525] Waiting data available... [2025-09-24 12:00:19.541] 512+0 records in [2025-09-24 12:00:19.557] 512+0 records out [2025-09-24 12:00:19.590] Starting syslogd/klogd: done [2025-09-24 12:00:19.606] DML Start [2025-09-24 12:00:19.750] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:00:19.989] DML res1: 0 [2025-09-24 12:00:20.398] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:00:20.398] Read Success [2025-09-24 12:00:20.398] Verifying certificate... [2025-09-24 12:00:20.623] Verified OK [2025-09-24 12:00:20.638] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:00:22.205] Verified OK [2025-09-24 12:00:22.226] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:00:22.861] Verified OK [2025-09-24 12:00:22.861] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:00:25.580] fs.protected_hardlinks = 1 [2025-09-24 12:00:25.580] fs.protected_symlinks = 1 [2025-09-24 12:00:25.596] kernel.modules_disabled = 1 [2025-09-24 12:00:25.789] [2025-09-24 12:00:25.789] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:00:27.027] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:00:34.772] SBL1:1210.0.1.0 [2025-09-24 12:00:34.820] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:00:36.387] SBL2:1210.0.1.0 [2025-09-24 12:00:36.435] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:00:36.531] j-A [2025-09-24 12:00:43.885] The R5 Autosar Classic is running [2025-09-24 12:00:43.910] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:00:43.910] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:00:44.519] INIT: version 2.96 booting [2025-09-24 12:00:44.630] INIT: Entering runlevel: 5 [2025-09-24 12:00:44.790] mtd24 attached [2025-09-24 12:00:44.806] mtd32 attached [2025-09-24 12:00:44.806] mtd28 attached [2025-09-24 12:00:44.854] ubi0:textures is mounted. [2025-09-24 12:00:44.895] RTNETLINK answers: File exists [2025-09-24 12:00:44.895] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:00:44.895] ubi2:animations is mounted. [2025-09-24 12:00:44.895] ubi1:dml_code is mounted. [2025-09-24 12:00:44.895] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:00:44.895] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:00:44.895] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:00:44.895] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:00:44.924] data.LB_FadeInType0=100 [2025-09-24 12:00:44.924] data.CHLH_FadeInType0=0 [2025-09-24 12:00:44.924] data.WU_FadeInDelay=0 [2025-09-24 12:00:44.924] max_time_out=0 [2025-09-24 12:00:44.924] No splash screen [2025-09-24 12:00:44.924] stop dss Done [2025-09-24 12:00:44.956] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:00:44.995] /dev/mem opened. [2025-09-24 12:00:44.995] Memory mapped at address 0xffff89dd3000. [2025-09-24 12:00:44.995] Read at address 0x00600018 (0xffff89dd3018): 0x00000000 [2025-09-24 12:00:44.995] Write at address 0x00600018 (0xffff89dd3018): 0x00400040, readback 0x00400040 [2025-09-24 12:00:44.995] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:00:45.091] Loaded PowerVR consumer services. [2025-09-24 12:00:45.283] Waiting data available... [2025-09-24 12:00:45.299] 512+0 records in [2025-09-24 12:00:45.299] 512+0 records out [2025-09-24 12:00:45.347] Starting syslogd/klogd: done [2025-09-24 12:00:45.363] DML Start [2025-09-24 12:00:45.522] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:00:45.731] DML res1: 0 [2025-09-24 12:00:46.289] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:00:46.289] Read Success [2025-09-24 12:00:46.289] Verifying certificate... [2025-09-24 12:00:46.561] Verified OK [2025-09-24 12:00:46.577] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:00:48.202] Verified OK [2025-09-24 12:00:48.202] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:00:48.810] Verified OK [2025-09-24 12:00:48.810] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:00:51.384] fs.protected_hardlinks = 1 [2025-09-24 12:00:51.401] fs.protected_symlinks = 1 [2025-09-24 12:00:51.401] kernel.modules_disabled = 1 [2025-09-24 12:00:51.592] [2025-09-24 12:00:51.592] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:00:52.791] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:01:00.529] SBL1:1210.0.1.0 [2025-09-24 12:01:00.577] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:01:02.143] SBL2:1210.0.1.0 [2025-09-24 12:01:02.191] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:01:02.287] j-A [2025-09-24 12:01:09.642] The R5 Autosar Classic is running [2025-09-24 12:01:09.666] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:01:09.666] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:01:10.273] INIT: version 2.96 booting [2025-09-24 12:01:10.386] INIT: Entering runlevel: 5 [2025-09-24 12:01:10.529] mtd24 attached [2025-09-24 12:01:10.545] mtd28 attached [2025-09-24 12:01:10.561] mtd32 attached [2025-09-24 12:01:10.664] ubi0:textures is mounted. [2025-09-24 12:01:10.664] RTNETLINK answers: File exists [2025-09-24 12:01:10.664] ubi1:animations is mounted. [2025-09-24 12:01:10.664] ubi2:dml_code is mounted. [2025-09-24 12:01:10.664] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:01:10.664] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:01:10.664] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:01:10.664] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:01:10.664] data.LB_FadeInType0=100 [2025-09-24 12:01:10.664] data.CHLH_FadeInType0=0 [2025-09-24 12:01:10.664] data.WU_FadeInDelay=0 [2025-09-24 12:01:10.664] max_time_out=0 [2025-09-24 12:01:10.664] No splash screen [2025-09-24 12:01:10.664] stop dss Done [2025-09-24 12:01:10.664] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:01:10.747] /dev/mem opened. [2025-09-24 12:01:10.747] Memory mapped at address 0xffff8ef87000. [2025-09-24 12:01:10.747] Read at address 0x00600018 (0xffff8ef87018): 0x00000000 [2025-09-24 12:01:10.747] Write at address 0x00600018 (0xffff8ef87018): 0x00400040, readback 0x00400040 [2025-09-24 12:01:10.747] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:01:10.747] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:01:10.875] Loaded PowerVR consumer services. [2025-09-24 12:01:11.035] Waiting data available... [2025-09-24 12:01:11.051] 512+0 records in [2025-09-24 12:01:11.066] 512+0 records out [2025-09-24 12:01:11.099] Starting syslogd/klogd: done [2025-09-24 12:01:11.115] DML Start [2025-09-24 12:01:11.291] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:01:11.499] DML res1: 0 [2025-09-24 12:01:11.952] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:01:11.952] Read Success [2025-09-24 12:01:11.952] Verifying certificate... [2025-09-24 12:01:12.191] Verified OK [2025-09-24 12:01:12.207] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:01:13.961] Verified OK [2025-09-24 12:01:13.961] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:01:14.494] Verified OK [2025-09-24 12:01:14.494] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:01:16.925] fs.protected_hardlinks = 1 [2025-09-24 12:01:16.941] fs.protected_symlinks = 1 [2025-09-24 12:01:16.941] kernel.modules_disabled = 1 [2025-09-24 12:01:17.133] [2025-09-24 12:01:17.133] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:01:18.535] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:01:26.256] SBL1:1210.0.1.0 [2025-09-24 12:01:26.288] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:01:27.871] SBL2:1210.0.1.0 [2025-09-24 12:01:27.902] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:01:28.015] j-A [2025-09-24 12:01:35.369] The R5 Autosar Classic is running [2025-09-24 12:01:35.369] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:01:35.390] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:01:35.998] INIT: version 2.96 booting [2025-09-24 12:01:36.110] INIT: Entering runlevel: 5 [2025-09-24 12:01:36.270] mtd28 attached [2025-09-24 12:01:36.270] mtd24 attached [2025-09-24 12:01:36.286] mtd32 attached [2025-09-24 12:01:36.317] ubi0:animations is mounted. [2025-09-24 12:01:36.333] RTNETLINK answers: File exists [2025-09-24 12:01:36.397] ubi1:textures is mounted. [2025-09-24 12:01:36.397] ubi2:dml_code is mounted. [2025-09-24 12:01:36.397] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:01:36.397] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:01:36.397] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:01:36.397] data.LB_FadeInType0=100 [2025-09-24 12:01:36.397] data.CHLH_FadeInType0=0 [2025-09-24 12:01:36.397] data.WU_FadeInDelay=0 [2025-09-24 12:01:36.397] max_time_out=0 [2025-09-24 12:01:36.397] No splash screen [2025-09-24 12:01:36.397] stop dss Done [2025-09-24 12:01:36.397] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:01:36.397] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:01:36.462] /dev/mem opened. [2025-09-24 12:01:36.462] Memory mapped at address 0xffff9bd3c000. [2025-09-24 12:01:36.462] Read at address 0x00600018 (0xffff9bd3c018): 0x00000000 [2025-09-24 12:01:36.462] Write at address 0x00600018 (0xffff9bd3c018): 0x00400040, readback 0x00400040 [2025-09-24 12:01:36.462] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:01:36.477] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:01:36.558] Loaded PowerVR consumer services. [2025-09-24 12:01:36.733] Waiting data available... [2025-09-24 12:01:36.765] 512+0 records in [2025-09-24 12:01:36.765] 512+0 records out [2025-09-24 12:01:36.797] Starting syslogd/klogd: done [2025-09-24 12:01:36.813] DML Start [2025-09-24 12:01:37.005] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:01:37.229] DML res1: 0 [2025-09-24 12:01:37.661] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:01:37.677] Read Success [2025-09-24 12:01:37.677] Verifying certificate... [2025-09-24 12:01:37.901] Verified OK [2025-09-24 12:01:37.933] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:01:39.634] Verified OK [2025-09-24 12:01:39.634] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:01:40.303] Verified OK [2025-09-24 12:01:40.303] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:01:42.926] fs.protected_hardlinks = 1 [2025-09-24 12:01:42.926] fs.protected_symlinks = 1 [2025-09-24 12:01:42.941] kernel.modules_disabled = 1 [2025-09-24 12:01:43.134] [2025-09-24 12:01:43.134] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:01:44.231] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:01:51.991] SBL1:1210.0.1.0 [2025-09-24 12:01:52.039] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:01:53.606] SBL2:1210.0.1.0 [2025-09-24 12:01:53.654] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:01:53.765] j-A [2025-09-24 12:02:01.104] The R5 Autosar Classic is running [2025-09-24 12:02:01.135] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:02:01.135] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:02:01.742] INIT: version 2.96 booting [2025-09-24 12:02:01.854] INIT: Entering runlevel: 5 [2025-09-24 12:02:01.999] mtd28 attached [2025-09-24 12:02:02.015] mtd24 attached [2025-09-24 12:02:02.031] mtd32 attached [2025-09-24 12:02:02.062] ubi0:animations is mounted. [2025-09-24 12:02:02.144] ubi1:textures is mounted. [2025-09-24 12:02:02.144] RTNETLINK answers: File exists [2025-09-24 12:02:02.144] ubi2:dml_code is mounted. [2025-09-24 12:02:02.144] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:02:02.144] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:02:02.144] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:02:02.144] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:02:02.144] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:02:02.144] data.LB_FadeInType0=100 [2025-09-24 12:02:02.144] data.CHLH_FadeInType0=0 [2025-09-24 12:02:02.144] data.WU_FadeInDelay=0 [2025-09-24 12:02:02.144] max_time_out=0 [2025-09-24 12:02:02.144] No splash screen [2025-09-24 12:02:02.144] stop dss Done [2025-09-24 12:02:02.192] /dev/mem opened. [2025-09-24 12:02:02.239] Memory mapped at address 0xffffbb3b6000. [2025-09-24 12:02:02.239] Read at address 0x00600018 (0xffffbb3b6018): 0x00000000 [2025-09-24 12:02:02.239] Write at address 0x00600018 (0xffffbb3b6018): 0x00400040, readback 0x00400040 [2025-09-24 12:02:02.239] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:02:02.239] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:02:02.287] Loaded PowerVR consumer services. [2025-09-24 12:02:02.479] Waiting data available... [2025-09-24 12:02:02.495] 512+0 records in [2025-09-24 12:02:02.495] 512+0 records out [2025-09-24 12:02:02.543] Starting syslogd/klogd: done [2025-09-24 12:02:02.559] DML Start [2025-09-24 12:02:02.719] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:02:02.975] DML res1: 0 [2025-09-24 12:02:03.358] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:02:03.374] Read Success [2025-09-24 12:02:03.374] Verifying certificate... [2025-09-24 12:02:03.646] Verified OK [2025-09-24 12:02:03.662] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:02:05.403] Verified OK [2025-09-24 12:02:05.403] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:02:05.995] Verified OK [2025-09-24 12:02:05.995] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:02:08.553] fs.protected_hardlinks = 1 [2025-09-24 12:02:08.569] fs.protected_symlinks = 1 [2025-09-24 12:02:08.569] kernel.modules_disabled = 1 [2025-09-24 12:02:08.777] [2025-09-24 12:02:08.777] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:02:09.989] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:02:17.712] SBL1:1210.0.1.0 [2025-09-24 12:02:17.760] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:02:19.327] SBL2:1210.0.1.0 [2025-09-24 12:02:19.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:02:19.486] j-A [2025-09-24 12:02:26.857] The R5 Autosar Classic is running [2025-09-24 12:02:26.857] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:02:26.857] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:02:27.464] INIT: version 2.96 booting [2025-09-24 12:02:27.576] INIT: Entering runlevel: 5 [2025-09-24 12:02:27.736] mtd24 attached [2025-09-24 12:02:27.736] mtd32 attached [2025-09-24 12:02:27.752] mtd28 attached [2025-09-24 12:02:27.768] ubi0:textures is mounted. [2025-09-24 12:02:27.801] RTNETLINK answers: File exists [2025-09-24 12:02:27.839] ubi2:animations is mounted. [2025-09-24 12:02:27.839] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:02:27.839] ubi1:dml_code is mounted. [2025-09-24 12:02:27.839] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:02:27.839] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:02:27.839] data.LB_FadeInType0=100 [2025-09-24 12:02:27.865] data.CHLH_FadeInType0=0 [2025-09-24 12:02:27.865] data.WU_FadeInDelay=0 [2025-09-24 12:02:27.865] max_time_out=0 [2025-09-24 12:02:27.865] No splash screen [2025-09-24 12:02:27.865] stop dss Done [2025-09-24 12:02:27.865] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:02:27.865] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:02:27.896] /dev/mem opened. [2025-09-24 12:02:27.928] Memory mapped at address 0xffff8b27f000. [2025-09-24 12:02:27.928] Read at address 0x00600018 (0xffff8b27f018): 0x00000000 [2025-09-24 12:02:27.928] Write at address 0x00600018 (0xffff8b27f018): 0x00400040, readback 0x00400040 [2025-09-24 12:02:27.944] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:02:27.960] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:02:28.040] Loaded PowerVR consumer services. [2025-09-24 12:02:28.216] Waiting data available... [2025-09-24 12:02:28.232] 512+0 records in [2025-09-24 12:02:28.232] 512+0 records out [2025-09-24 12:02:28.279] Starting syslogd/klogd: done [2025-09-24 12:02:28.295] DML Start [2025-09-24 12:02:28.440] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:02:28.664] DML res1: 0 [2025-09-24 12:02:29.110] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:02:29.110] Read Success [2025-09-24 12:02:29.110] Verifying certificate... [2025-09-24 12:02:29.334] Verified OK [2025-09-24 12:02:29.334] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:02:31.011] Verified OK [2025-09-24 12:02:31.011] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:02:31.640] Verified OK [2025-09-24 12:02:31.640] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:02:34.310] fs.protected_hardlinks = 1 [2025-09-24 12:02:34.326] fs.protected_symlinks = 1 [2025-09-24 12:02:34.326] kernel.modules_disabled = 1 [2025-09-24 12:02:34.533] [2025-09-24 12:02:34.533] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:02:35.712] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:02:43.462] SBL1:1210.0.1.0 [2025-09-24 12:02:43.510] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:02:45.076] SBL2:1210.0.1.0 [2025-09-24 12:02:45.124] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:02:45.236] j-A [2025-09-24 12:02:52.608] The R5 Autosar Classic is running [2025-09-24 12:02:52.608] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:02:52.608] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:02:53.215] INIT: version 2.96 booting [2025-09-24 12:02:53.326] INIT: Entering runlevel: 5 [2025-09-24 12:02:53.487] mtd24 attached [2025-09-24 12:02:53.487] mtd32 attached [2025-09-24 12:02:53.502] mtd28 attached [2025-09-24 12:02:53.550] RTNETLINK answers: File exists [2025-09-24 12:02:53.624] ubi0:textures is mounted. [2025-09-24 12:02:53.624] ubi2:animations is mounted. [2025-09-24 12:02:53.624] ubi1:dml_code is mounted. [2025-09-24 12:02:53.624] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:02:53.624] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:02:53.624] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:02:53.624] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:02:53.624] data.LB_FadeInType0=100 [2025-09-24 12:02:53.624] data.CHLH_FadeInType0=0 [2025-09-24 12:02:53.624] data.WU_FadeInDelay=0 [2025-09-24 12:02:53.624] max_time_out=0 [2025-09-24 12:02:53.624] No splash screen [2025-09-24 12:02:53.624] stop dss Done [2025-09-24 12:02:53.624] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:02:53.699] /dev/mem opened. [2025-09-24 12:02:53.699] Memory mapped at address 0xffffa66ee000. [2025-09-24 12:02:53.699] Read at address 0x00600018 (0xffffa66ee018): 0x00000000 [2025-09-24 12:02:53.699] Write at address 0x00600018 (0xffffa66ee018): 0x00400040, readback 0x00400040 [2025-09-24 12:02:53.699] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:02:53.699] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:02:53.779] Loaded PowerVR consumer services. [2025-09-24 12:02:53.955] Waiting data available... [2025-09-24 12:02:54.003] 512+0 records in [2025-09-24 12:02:54.003] 512+0 records out [2025-09-24 12:02:54.051] Starting syslogd/klogd: done [2025-09-24 12:02:54.067] DML Start [2025-09-24 12:02:54.211] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:02:54.435] DML res1: 0 [2025-09-24 12:02:54.893] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:02:54.893] Read Success [2025-09-24 12:02:54.893] Verifying certificate... [2025-09-24 12:02:55.116] Verified OK [2025-09-24 12:02:55.132] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:02:56.841] Verified OK [2025-09-24 12:02:56.841] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:02:57.400] Verified OK [2025-09-24 12:02:57.416] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:02:59.910] fs.protected_hardlinks = 1 [2025-09-24 12:02:59.936] fs.protected_symlinks = 1 [2025-09-24 12:02:59.936] kernel.modules_disabled = 1 [2025-09-24 12:03:00.112] [2025-09-24 12:03:00.112] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:03:01.483] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:03:09.196] SBL1:1210.0.1.0 [2025-09-24 12:03:09.244] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:03:10.811] SBL2:1210.0.1.0 [2025-09-24 12:03:10.859] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:03:10.971] j-A [2025-09-24 12:03:18.311] The R5 Autosar Classic is running [2025-09-24 12:03:18.336] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:03:18.336] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:03:18.944] INIT: version 2.96 booting [2025-09-24 12:03:19.055] INIT: Entering runlevel: 5 [2025-09-24 12:03:19.199] mtd24 attached [2025-09-24 12:03:19.215] mtd28 attached [2025-09-24 12:03:19.247] ubi0:textures is mounted. [2025-09-24 12:03:19.263] mtd32 attached [2025-09-24 12:03:19.279] ubi1:animations is mounted. [2025-09-24 12:03:19.279] RTNETLINK answers: File exists [2025-09-24 12:03:19.318] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:03:19.318] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:03:19.318] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:03:19.318] ubi2:dml_code is mounted. [2025-09-24 12:03:19.318] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:03:19.318] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:03:19.318] data.LB_FadeInType0=100 [2025-09-24 12:03:19.339] data.CHLH_FadeInType0=0 [2025-09-24 12:03:19.339] data.WU_FadeInDelay=0 [2025-09-24 12:03:19.339] max_time_out=0 [2025-09-24 12:03:19.339] No splash screen [2025-09-24 12:03:19.339] stop dss Done [2025-09-24 12:03:19.419] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:03:19.419] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:03:19.419] /dev/mem opened. [2025-09-24 12:03:19.419] Memory mapped at address 0xffffa86a9000. [2025-09-24 12:03:19.419] Read at address 0x00600018 (0xffffa86a9018): 0x00000000 [2025-09-24 12:03:19.419] Write at address 0x00600018 (0xffffa86a9018): 0x00400040, readback 0x00400040 [2025-09-24 12:03:19.547] Loaded PowerVR consumer services. [2025-09-24 12:03:19.691] Waiting data available... [2025-09-24 12:03:19.707] 512+0 records in [2025-09-24 12:03:19.707] 512+0 records out [2025-09-24 12:03:19.739] Starting syslogd/klogd: done [2025-09-24 12:03:19.755] DML Start [2025-09-24 12:03:19.931] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:03:20.155] DML res1: 0 [2025-09-24 12:03:20.579] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:03:20.579] Read Success [2025-09-24 12:03:20.579] Verifying certificate... [2025-09-24 12:03:20.850] Verified OK [2025-09-24 12:03:20.866] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:03:22.573] Verified OK [2025-09-24 12:03:22.573] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:03:23.126] Verified OK [2025-09-24 12:03:23.126] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:03:25.797] fs.protected_hardlinks = 1 [2025-09-24 12:03:25.797] fs.protected_symlinks = 1 [2025-09-24 12:03:25.813] kernel.modules_disabled = 1 [2025-09-24 12:03:26.020] [2025-09-24 12:03:26.020] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:03:27.198] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:03:34.928] SBL1:1210.0.1.0 [2025-09-24 12:03:34.960] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:03:36.542] SBL2:1210.0.1.0 [2025-09-24 12:03:36.590] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:03:36.686] j-A [2025-09-24 12:03:44.042] The R5 Autosar Classic is running [2025-09-24 12:03:44.042] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:03:44.063] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:03:44.671] INIT: version 2.96 booting [2025-09-24 12:03:44.782] INIT: Entering runlevel: 5 [2025-09-24 12:03:44.943] mtd24 attached [2025-09-24 12:03:44.943] mtd28 attached [2025-09-24 12:03:44.958] mtd32 attached [2025-09-24 12:03:45.044] ubi0:textures is mounted. [2025-09-24 12:03:45.044] RTNETLINK answers: File exists [2025-09-24 12:03:45.044] ubi1:animations is mounted. [2025-09-24 12:03:45.044] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:03:45.044] ubi2:dml_code is mounted. [2025-09-24 12:03:45.044] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:03:45.044] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:03:45.044] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:03:45.044] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:03:45.066] data.LB_FadeInType0=100 [2025-09-24 12:03:45.066] data.CHLH_FadeInType0=0 [2025-09-24 12:03:45.066] data.WU_FadeInDelay=0 [2025-09-24 12:03:45.066] max_time_out=0 [2025-09-24 12:03:45.066] No splash screen [2025-09-24 12:03:45.066] stop dss Done [2025-09-24 12:03:45.098] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:03:45.134] /dev/mem opened. [2025-09-24 12:03:45.134] Memory mapped at address 0xffff86d4b000. [2025-09-24 12:03:45.134] Read at address 0x00600018 (0xffff86d4b018): 0x00000000 [2025-09-24 12:03:45.134] Write at address 0x00600018 (0xffff86d4b018): 0x00400040, readback 0x00400040 [2025-09-24 12:03:45.134] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:03:45.405] Waiting data available... [2025-09-24 12:03:45.405] Loaded PowerVR consumer services. [2025-09-24 12:03:45.421] 512+0 records in [2025-09-24 12:03:45.421] 512+0 records out [2025-09-24 12:03:45.469] Starting syslogd/klogd: done [2025-09-24 12:03:45.485] DML Start [2025-09-24 12:03:45.644] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:03:45.868] DML res1: 0 [2025-09-24 12:03:46.332] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:03:46.348] Read Success [2025-09-24 12:03:46.348] Verifying certificate... [2025-09-24 12:03:46.619] Verified OK [2025-09-24 12:03:46.635] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:03:48.384] Verified OK [2025-09-24 12:03:48.384] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:03:48.959] Verified OK [2025-09-24 12:03:48.959] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:03:51.405] fs.protected_hardlinks = 1 [2025-09-24 12:03:51.421] fs.protected_symlinks = 1 [2025-09-24 12:03:51.421] kernel.modules_disabled = 1 [2025-09-24 12:03:51.613] [2025-09-24 12:03:51.613] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:03:52.905] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:04:00.667] SBL1:1210.0.1.0 [2025-09-24 12:04:00.699] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:04:02.281] SBL2:1210.0.1.0 [2025-09-24 12:04:02.313] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:04:02.426] j-A [2025-09-24 12:04:09.802] The R5 Autosar Classic is running [2025-09-24 12:04:09.802] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:04:09.802] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:04:10.409] INIT: version 2.96 booting [2025-09-24 12:04:10.521] INIT: Entering runlevel: 5 [2025-09-24 12:04:10.681] mtd24 attached [2025-09-24 12:04:10.681] mtd28 attached [2025-09-24 12:04:10.697] mtd32 attached [2025-09-24 12:04:10.745] RTNETLINK answers: File exists [2025-09-24 12:04:10.788] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:04:10.788] ubi1:animations is mounted. [2025-09-24 12:04:10.788] ubi0:textures is mounted. [2025-09-24 12:04:10.788] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:04:10.788] ubi2:dml_code is mounted. [2025-09-24 12:04:10.788] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:04:10.788] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:04:10.788] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:04:10.788] data.LB_FadeInType0=100 [2025-09-24 12:04:10.809] data.CHLH_FadeInType0=0 [2025-09-24 12:04:10.809] data.WU_FadeInDelay=0 [2025-09-24 12:04:10.809] max_time_out=0 [2025-09-24 12:04:10.809] No splash screen [2025-09-24 12:04:10.809] stop dss Done [2025-09-24 12:04:10.840] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:04:10.840] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:04:10.897] /dev/mem opened. [2025-09-24 12:04:10.897] Memory mapped at address 0xffffb3e1f000. [2025-09-24 12:04:10.897] Read at address 0x00600018 (0xffffb3e1f018): 0x00000000 [2025-09-24 12:04:10.897] Write at address 0x00600018 (0xffffb3e1f018): 0x00400040, readback 0x00400040 [2025-09-24 12:04:11.088] Loaded PowerVR consumer services. [2025-09-24 12:04:11.168] Waiting data available... [2025-09-24 12:04:11.201] 512+0 records in [2025-09-24 12:04:11.201] 512+0 records out [2025-09-24 12:04:11.248] Starting syslogd/klogd: done [2025-09-24 12:04:11.248] DML Start [2025-09-24 12:04:11.473] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:04:11.696] DML res1: 0 [2025-09-24 12:04:12.026] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:04:12.026] Read Success [2025-09-24 12:04:12.026] Verifying certificate... [2025-09-24 12:04:12.282] Verified OK [2025-09-24 12:04:12.298] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:04:13.977] Verified OK [2025-09-24 12:04:13.977] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:04:14.616] Verified OK [2025-09-24 12:04:14.637] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:04:17.259] fs.protected_hardlinks = 1 [2025-09-24 12:04:17.275] fs.protected_symlinks = 1 [2025-09-24 12:04:17.275] kernel.modules_disabled = 1 [2025-09-24 12:04:17.467] [2025-09-24 12:04:17.467] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:04:18.682] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:04:26.398] SBL1:1210.0.1.0 [2025-09-24 12:04:26.446] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:04:28.012] SBL2:1210.0.1.0 [2025-09-24 12:04:28.060] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:04:28.173] j-A [2025-09-24 12:04:35.512] The R5 Autosar Classic is running [2025-09-24 12:04:35.543] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:04:35.543] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:04:36.151] INIT: version 2.96 booting [2025-09-24 12:04:36.262] INIT: Entering runlevel: 5 [2025-09-24 12:04:36.422] mtd24 attached [2025-09-24 12:04:36.422] mtd28 attached [2025-09-24 12:04:36.455] ubi0:textures is mounted. [2025-09-24 12:04:36.471] ubi1:animations is mounted. [2025-09-24 12:04:36.471] mtd32 attached [2025-09-24 12:04:36.487] RTNETLINK answers: File exists [2025-09-24 12:04:36.503] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:04:36.503] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:04:36.550] ubi2:dml_code is mounted. [2025-09-24 12:04:36.550] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:04:36.550] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:04:36.550] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:04:36.550] data.LB_FadeInType0=100 [2025-09-24 12:04:36.550] data.CHLH_FadeInType0=0 [2025-09-24 12:04:36.550] data.WU_FadeInDelay=0 [2025-09-24 12:04:36.550] max_time_out=0 [2025-09-24 12:04:36.550] No splash screen [2025-09-24 12:04:36.550] stop dss Done [2025-09-24 12:04:36.634] /dev/mem opened. [2025-09-24 12:04:36.634] Memory mapped at address 0xffffa5d93000. [2025-09-24 12:04:36.634] Read at address 0x00600018 (0xffffa5d93018): 0x00000000 [2025-09-24 12:04:36.634] Write at address 0x00600018 (0xffffa5d93018): 0x00400040, readback 0x00400040 [2025-09-24 12:04:36.634] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:04:36.650] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:04:36.890] Loaded PowerVR consumer services. [2025-09-24 12:04:36.922] Waiting data available... [2025-09-24 12:04:36.939] 512+0 records in [2025-09-24 12:04:36.939] 512+0 records out [2025-09-24 12:04:36.971] Starting syslogd/klogd: done [2025-09-24 12:04:36.987] DML Start [2025-09-24 12:04:37.147] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:04:37.338] DML res1: 0 [2025-09-24 12:04:37.811] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:04:37.811] Read Success [2025-09-24 12:04:37.811] Verifying certificate... [2025-09-24 12:04:38.051] Verified OK [2025-09-24 12:04:38.083] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:04:39.754] Verified OK [2025-09-24 12:04:39.754] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:04:40.362] Verified OK [2025-09-24 12:04:40.362] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:04:42.985] fs.protected_hardlinks = 1 [2025-09-24 12:04:43.001] fs.protected_symlinks = 1 [2025-09-24 12:04:43.001] kernel.modules_disabled = 1 [2025-09-24 12:04:43.208] [2025-09-24 12:04:43.208] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:04:44.397] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:04:52.148] SBL1:1210.0.1.0 [2025-09-24 12:04:52.180] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:04:53.763] SBL2:1210.0.1.0 [2025-09-24 12:04:53.795] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:04:53.906] j-A [2025-09-24 12:05:01.280] The R5 Autosar Classic is running [2025-09-24 12:05:01.280] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:05:01.280] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:05:01.904] INIT: version 2.96 booting [2025-09-24 12:05:02.016] INIT: Entering runlevel: 5 [2025-09-24 12:05:02.160] mtd28 attached [2025-09-24 12:05:02.176] mtd32 attached [2025-09-24 12:05:02.191] mtd24 attached [2025-09-24 12:05:02.208] ubi0:animations is mounted. [2025-09-24 12:05:02.240] ubi1:dml_code is mounted. [2025-09-24 12:05:02.240] RTNETLINK answers: File exists [2025-09-24 12:05:02.298] ubi2:textures is mounted. [2025-09-24 12:05:02.298] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:05:02.298] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:05:02.298] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:05:02.298] data.LB_FadeInType0=100 [2025-09-24 12:05:02.298] data.CHLH_FadeInType0=0 [2025-09-24 12:05:02.298] data.WU_FadeInDelay=0 [2025-09-24 12:05:02.298] max_time_out=0 [2025-09-24 12:05:02.298] No splash screen [2025-09-24 12:05:02.298] stop dss Done [2025-09-24 12:05:02.298] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:05:02.298] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:05:02.346] /dev/mem opened. [2025-09-24 12:05:02.346] Memory mapped at address 0xffff823f6000. [2025-09-24 12:05:02.372] Read at address 0x00600018 (0xffff823f6018): 0x00000000 [2025-09-24 12:05:02.372] Write at address 0x00600018 (0xffff823f6018): 0x00400040, readback 0x00400040 [2025-09-24 12:05:02.388] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:05:02.404] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:05:02.564] Loaded PowerVR consumer services. [2025-09-24 12:05:02.676] Waiting data available... [2025-09-24 12:05:02.707] 512+0 records in [2025-09-24 12:05:02.707] 512+0 records out [2025-09-24 12:05:02.723] Starting syslogd/klogd: done [2025-09-24 12:05:02.740] DML Start [2025-09-24 12:05:02.916] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:05:03.107] DML res1: 0 [2025-09-24 12:05:03.549] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:05:03.549] Read Success [2025-09-24 12:05:03.549] Verifying certificate... [2025-09-24 12:05:03.789] Verified OK [2025-09-24 12:05:03.805] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:05:05.434] Verified OK [2025-09-24 12:05:05.434] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:05:06.089] Verified OK [2025-09-24 12:05:06.089] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:05:08.712] fs.protected_hardlinks = 1 [2025-09-24 12:05:08.712] fs.protected_symlinks = 1 [2025-09-24 12:05:08.728] kernel.modules_disabled = 1 [2025-09-24 12:05:08.904] [2025-09-24 12:05:08.904] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:05:10.163] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:05:17.878] SBL1:1210.0.1.0 [2025-09-24 12:05:17.910] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:05:19.493] SBL2:1210.0.1.0 [2025-09-24 12:05:19.541] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:05:19.637] j-A [2025-09-24 12:05:26.992] The R5 Autosar Classic is running [2025-09-24 12:05:26.992] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:05:27.013] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:05:27.621] INIT: version 2.96 booting [2025-09-24 12:05:27.733] INIT: Entering runlevel: 5 [2025-09-24 12:05:27.892] mtd28 attached [2025-09-24 12:05:27.892] mtd24 attached [2025-09-24 12:05:27.908] mtd32 attached [2025-09-24 12:05:27.956] ubi0:animations is mounted. [2025-09-24 12:05:27.956] ubi1:textures is mounted. [2025-09-24 12:05:27.956] RTNETLINK answers: File exists [2025-09-24 12:05:28.020] ubi2:dml_code is mounted. [2025-09-24 12:05:28.020] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:05:28.020] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:05:28.020] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:05:28.020] data.LB_FadeInType0=100 [2025-09-24 12:05:28.020] data.CHLH_FadeInType0=0 [2025-09-24 12:05:28.020] data.WU_FadeInDelay=0 [2025-09-24 12:05:28.020] max_time_out=0 [2025-09-24 12:05:28.020] No splash screen [2025-09-24 12:05:28.020] stop dss Done [2025-09-24 12:05:28.020] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:05:28.020] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:05:28.085] /dev/mem opened. [2025-09-24 12:05:28.085] Memory mapped at address 0xffffb5c13000. [2025-09-24 12:05:28.085] Read at address 0x00600018 (0xffffb5c13018): 0x00000000 [2025-09-24 12:05:28.085] Write at address 0x00600018 (0xffffb5c13018): 0x00400040, readback 0x00400040 [2025-09-24 12:05:28.116] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:05:28.132] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:05:28.228] Loaded PowerVR consumer services. [2025-09-24 12:05:28.372] Waiting data available... [2025-09-24 12:05:28.404] 512+0 records in [2025-09-24 12:05:28.404] 512+0 records out [2025-09-24 12:05:28.436] Starting syslogd/klogd: done [2025-09-24 12:05:28.452] DML Start [2025-09-24 12:05:28.645] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:05:28.804] DML res1: 0 [2025-09-24 12:05:29.268] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:05:29.289] Read Success [2025-09-24 12:05:29.289] Verifying certificate... [2025-09-24 12:05:29.529] Verified OK [2025-09-24 12:05:29.545] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:05:31.239] Verified OK [2025-09-24 12:05:31.239] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:05:31.856] Verified OK [2025-09-24 12:05:31.856] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:05:34.350] fs.protected_hardlinks = 1 [2025-09-24 12:05:34.367] fs.protected_symlinks = 1 [2025-09-24 12:05:34.367] kernel.modules_disabled = 1 [2025-09-24 12:05:34.558] [2025-09-24 12:05:34.558] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:05:35.868] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:05:43.622] SBL1:1210.0.1.0 [2025-09-24 12:05:43.654] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:05:45.237] SBL2:1210.0.1.0 [2025-09-24 12:05:45.285] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:05:45.380] j-A [2025-09-24 12:05:52.734] The R5 Autosar Classic is running [2025-09-24 12:05:52.755] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:05:52.755] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:05:53.363] INIT: version 2.96 booting [2025-09-24 12:05:53.475] INIT: Entering runlevel: 5 [2025-09-24 12:05:53.635] mtd24 attached [2025-09-24 12:05:53.635] mtd28 attached [2025-09-24 12:05:53.651] mtd32 attached [2025-09-24 12:05:53.699] ubi0:textures is mounted. [2025-09-24 12:05:53.763] RTNETLINK answers: File exists [2025-09-24 12:05:53.763] ubi1:animations is mounted. [2025-09-24 12:05:53.763] ubi2:dml_code is mounted. [2025-09-24 12:05:53.763] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:05:53.763] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:05:53.763] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:05:53.763] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:05:53.763] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:05:53.763] data.LB_FadeInType0=100 [2025-09-24 12:05:53.763] data.CHLH_FadeInType0=0 [2025-09-24 12:05:53.763] data.WU_FadeInDelay=0 [2025-09-24 12:05:53.763] max_time_out=0 [2025-09-24 12:05:53.763] No splash screen [2025-09-24 12:05:53.763] stop dss Done [2025-09-24 12:05:53.795] /dev/mem opened. [2025-09-24 12:05:53.795] Memory mapped at address 0xffffae799000. [2025-09-24 12:05:53.821] Read at address 0x00600018 (0xffffae799018): 0x00000000 [2025-09-24 12:05:53.821] Write at address 0x00600018 (0xffffae799018): 0x00400040, readback 0x00400040 [2025-09-24 12:05:53.836] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:05:53.859] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:05:54.020] Loaded PowerVR consumer services. [2025-09-24 12:05:54.131] Waiting data available... [2025-09-24 12:05:54.163] 512+0 records in [2025-09-24 12:05:54.163] 512+0 records out [2025-09-24 12:05:54.179] Starting syslogd/klogd: done [2025-09-24 12:05:54.195] DML Start [2025-09-24 12:05:54.404] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:05:54.628] DML res1: 0 [2025-09-24 12:05:55.017] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:05:55.017] Read Success [2025-09-24 12:05:55.017] Verifying certificate... [2025-09-24 12:05:55.240] Verified OK [2025-09-24 12:05:55.272] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:05:56.823] Verified OK [2025-09-24 12:05:56.823] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:05:57.459] Verified OK [2025-09-24 12:05:57.459] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:06:00.146] fs.protected_hardlinks = 1 [2025-09-24 12:06:00.162] fs.protected_symlinks = 1 [2025-09-24 12:06:00.162] kernel.modules_disabled = 1 [2025-09-24 12:06:00.354] [2025-09-24 12:06:00.354] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:06:01.639] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:06:09.374] SBL1:1210.0.1.0 [2025-09-24 12:06:09.406] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:06:10.989] SBL2:1210.0.1.0 [2025-09-24 12:06:11.020] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:06:11.133] j-A [2025-09-24 12:06:18.507] The R5 Autosar Classic is running [2025-09-24 12:06:18.507] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:06:18.507] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:06:19.114] INIT: version 2.96 booting [2025-09-24 12:06:19.225] INIT: Entering runlevel: 5 [2025-09-24 12:06:19.386] mtd28 attached [2025-09-24 12:06:19.386] mtd24 attached [2025-09-24 12:06:19.402] mtd32 attached [2025-09-24 12:06:19.450] RTNETLINK answers: File exists [2025-09-24 12:06:19.512] ubi0:animations is mounted. [2025-09-24 12:06:19.512] ubi1:textures is mounted. [2025-09-24 12:06:19.512] ubi2:dml_code is mounted. [2025-09-24 12:06:19.512] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:06:19.512] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:06:19.512] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:06:19.512] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:06:19.512] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:06:19.512] data.LB_FadeInType0=100 [2025-09-24 12:06:19.512] data.CHLH_FadeInType0=0 [2025-09-24 12:06:19.512] data.WU_FadeInDelay=0 [2025-09-24 12:06:19.512] max_time_out=0 [2025-09-24 12:06:19.512] No splash screen [2025-09-24 12:06:19.512] stop dss Done [2025-09-24 12:06:19.596] /dev/mem opened. [2025-09-24 12:06:19.596] Memory mapped at address 0xffffbeefc000. [2025-09-24 12:06:19.596] Read at address 0x00600018 (0xffffbeefc018): 0x00000000 [2025-09-24 12:06:19.596] Write at address 0x00600018 (0xffffbeefc018): 0x00400040, readback 0x00400040 [2025-09-24 12:06:19.596] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:06:19.596] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:06:19.677] Loaded PowerVR consumer services. [2025-09-24 12:06:19.852] Waiting data available... [2025-09-24 12:06:19.884] 512+0 records in [2025-09-24 12:06:19.884] 512+0 records out [2025-09-24 12:06:19.932] Starting syslogd/klogd: done [2025-09-24 12:06:19.949] DML Start [2025-09-24 12:06:20.124] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:06:20.300] DML res1: 0 [2025-09-24 12:06:20.807] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:06:20.807] Read Success [2025-09-24 12:06:20.807] Verifying certificate... [2025-09-24 12:06:21.064] Verified OK [2025-09-24 12:06:21.080] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:06:22.838] Verified OK [2025-09-24 12:06:22.838] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:06:23.393] Verified OK [2025-09-24 12:06:23.393] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:06:24.081] 5488 GC [0] [2025-09-24 12:06:24.144] 5549 GC [1] [2025-09-24 12:06:24.209] 5621 GC [2] [2025-09-24 12:06:24.288] 5690 GC [3] [2025-09-24 12:06:24.352] 5768 GC [4] [2025-09-24 12:06:24.432] 5839 GC [5] [2025-09-24 12:06:24.496] 5907 GC [6] [2025-09-24 12:06:24.560] 5969 GC [7] [2025-09-24 12:06:24.624] 6040 GC [8] [2025-09-24 12:06:24.704] 6108 GC [9] [2025-09-24 12:06:24.768] 6181 GC [10] [2025-09-24 12:06:24.832] 6242 GC [11] [2025-09-24 12:06:24.896] 6311 GC [12] [2025-09-24 12:06:24.960] 6368 GC [13] [2025-09-24 12:06:25.024] 6430 GC [14] [2025-09-24 12:06:25.072] 6487 GC [15] [2025-09-24 12:06:25.136] 6548 GC [16] [2025-09-24 12:06:25.200] 6610 GC [17] [2025-09-24 12:06:25.264] 6669 GC [18] [2025-09-24 12:06:25.312] 6730 GC [19] [2025-09-24 12:06:25.376] 6792 GC [20] [2025-09-24 12:06:25.440] 6848 GC [21] [2025-09-24 12:06:25.503] 6922 GC [22] [2025-09-24 12:06:25.567] 6980 GC [23] [2025-09-24 12:06:25.632] 7041 GC [24] [2025-09-24 12:06:25.695] 7100 GC [25] [2025-09-24 12:06:25.743] 7167 GC [26] [2025-09-24 12:06:25.807] 7218 GC [27] [2025-09-24 12:06:25.855] fs.protected_hardlinks = 1 [2025-09-24 12:06:25.855] fs.protected_symlinks = 1 [2025-09-24 12:06:25.872] kernel.modules_disabled = 1 [2025-09-24 12:06:25.872] 7287 GC [28] [2025-09-24 12:06:25.872] 7287 GC [29] [2025-09-24 12:06:25.951] GC DONE [2025-09-24 12:06:26.063] [2025-09-24 12:06:26.063] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:06:27.306] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:06:35.108] SBL1:1210.0.1.0 [2025-09-24 12:06:35.139] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:06:36.722] SBL2:1210.0.1.0 [2025-09-24 12:06:36.754] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:06:36.866] j-A [2025-09-24 12:06:44.204] The R5 Autosar Classic is running [2025-09-24 12:06:44.235] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:06:44.235] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:06:44.843] INIT: version 2.96 booting [2025-09-24 12:06:44.955] INIT: Entering runlevel: 5 [2025-09-24 12:06:45.099] mtd28 attached [2025-09-24 12:06:45.114] mtd32 attached [2025-09-24 12:06:45.130] mtd24 attached [2025-09-24 12:06:45.146] ubi0:animations is mounted. [2025-09-24 12:06:45.178] RTNETLINK answers: File exists [2025-09-24 12:06:45.178] ubi1:dml_code is mounted. [2025-09-24 12:06:45.240] ubi2:textures is mounted. [2025-09-24 12:06:45.240] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:06:45.240] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:06:45.240] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:06:45.240] data.LB_FadeInType0=100 [2025-09-24 12:06:45.240] data.CHLH_FadeInType0=0 [2025-09-24 12:06:45.240] data.WU_FadeInDelay=0 [2025-09-24 12:06:45.240] max_time_out=0 [2025-09-24 12:06:45.240] No splash screen [2025-09-24 12:06:45.240] stop dss Done [2025-09-24 12:06:45.240] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:06:45.240] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:06:45.283] /dev/mem opened. [2025-09-24 12:06:45.283] Memory mapped at address 0xffff9f75c000. [2025-09-24 12:06:45.283] Read at address 0x00600018 (0xffff9f75c018): 0x00000000 [2025-09-24 12:06:45.283] Write at address 0x00600018 (0xffff9f75c018): 0x00400040, readback 0x00400040 [2025-09-24 12:06:45.283] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:06:45.311] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:06:45.438] Loaded PowerVR consumer services. [2025-09-24 12:06:45.534] Waiting data available... [2025-09-24 12:06:45.550] 512+0 records in [2025-09-24 12:06:45.550] 512+0 records out [2025-09-24 12:06:45.582] Starting syslogd/klogd: done [2025-09-24 12:06:45.598] DML Start [2025-09-24 12:06:45.790] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:06:45.998] DML res1: 0 [2025-09-24 12:06:46.467] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:06:46.467] Read Success [2025-09-24 12:06:46.467] Verifying certificate... [2025-09-24 12:06:46.722] Verified OK [2025-09-24 12:06:46.738] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:06:48.560] Verified OK [2025-09-24 12:06:48.560] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:06:49.094] Verified OK [2025-09-24 12:06:49.094] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:06:51.556] fs.protected_hardlinks = 1 [2025-09-24 12:06:51.556] fs.protected_symlinks = 1 [2025-09-24 12:06:51.572] kernel.modules_disabled = 1 [2025-09-24 12:06:51.765] [2025-09-24 12:06:51.765] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:06:53.121] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:07:00.835] SBL1:1210.0.1.0 [2025-09-24 12:07:00.867] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:07:02.451] SBL2:1210.0.1.0 [2025-09-24 12:07:02.483] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:07:02.578] j-A [2025-09-24 12:07:09.933] The R5 Autosar Classic is running [2025-09-24 12:07:09.957] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:07:09.957] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:07:10.564] INIT: version 2.96 booting [2025-09-24 12:07:10.676] INIT: Entering runlevel: 5 [2025-09-24 12:07:10.821] mtd24 attached [2025-09-24 12:07:10.836] mtd28 attached [2025-09-24 12:07:10.853] mtd32 attached [2025-09-24 12:07:10.884] ubi0:textures is mounted. [2025-09-24 12:07:10.900] RTNETLINK answers: File exists [2025-09-24 12:07:10.954] ubi1:animations is mounted. [2025-09-24 12:07:10.954] ubi2:dml_code is mounted. [2025-09-24 12:07:10.954] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:07:10.954] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:07:10.954] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:07:10.954] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:07:10.954] data.LB_FadeInType0=100 [2025-09-24 12:07:10.954] data.CHLH_FadeInType0=0 [2025-09-24 12:07:10.954] data.WU_FadeInDelay=0 [2025-09-24 12:07:10.954] max_time_out=0 [2025-09-24 12:07:10.954] No splash screen [2025-09-24 12:07:10.954] stop dss Done [2025-09-24 12:07:10.954] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:07:11.001] /dev/mem opened. [2025-09-24 12:07:11.001] Memory mapped at address 0xffffb9f48000. [2025-09-24 12:07:11.033] Read at address 0x00600018 (0xffffb9f48018): 0x00000000 [2025-09-24 12:07:11.033] Write at address 0x00600018 (0xffffb9f48018): 0x00400040, readback 0x00400040 [2025-09-24 12:07:11.033] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:07:11.033] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:07:11.145] Loaded PowerVR consumer services. [2025-09-24 12:07:11.257] 512+0 records in [2025-09-24 12:07:11.257] 512+0 records out [2025-09-24 12:07:11.273] Waiting data available... [2025-09-24 12:07:11.289] Starting syslogd/klogd: done [2025-09-24 12:07:11.305] DML Start [2025-09-24 12:07:11.481] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:07:11.673] DML res1: 0 [2025-09-24 12:07:12.232] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:07:12.232] Read Success [2025-09-24 12:07:12.232] Verifying certificate... [2025-09-24 12:07:12.455] Verified OK [2025-09-24 12:07:12.470] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:07:14.092] Verified OK [2025-09-24 12:07:14.092] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:07:14.708] Verified OK [2025-09-24 12:07:14.708] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:07:17.362] fs.protected_hardlinks = 1 [2025-09-24 12:07:17.379] fs.protected_symlinks = 1 [2025-09-24 12:07:17.379] kernel.modules_disabled = 1 [2025-09-24 12:07:17.570] [2025-09-24 12:07:17.570] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:07:18.813] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:07:26.566] SBL1:1210.0.1.0 [2025-09-24 12:07:26.614] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:07:28.180] SBL2:1210.0.1.0 [2025-09-24 12:07:28.228] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:07:28.325] j-A [2025-09-24 12:07:35.681] The R5 Autosar Classic is running [2025-09-24 12:07:35.681] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:07:35.701] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:07:36.309] INIT: version 2.96 booting [2025-09-24 12:07:36.420] INIT: Entering runlevel: 5 [2025-09-24 12:07:36.565] mtd24 attached [2025-09-24 12:07:36.581] mtd32 attached [2025-09-24 12:07:36.596] mtd28 attached [2025-09-24 12:07:36.612] ubi0:textures is mounted. [2025-09-24 12:07:36.644] RTNETLINK answers: File exists [2025-09-24 12:07:36.644] ubi1:dml_code is mounted. [2025-09-24 12:07:36.702] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:07:36.702] ubi2:animations is mounted. [2025-09-24 12:07:36.702] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:07:36.702] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:07:36.702] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:07:36.702] data.LB_FadeInType0=100 [2025-09-24 12:07:36.702] data.CHLH_FadeInType0=0 [2025-09-24 12:07:36.702] data.WU_FadeInDelay=0 [2025-09-24 12:07:36.702] max_time_out=0 [2025-09-24 12:07:36.702] No splash screen [2025-09-24 12:07:36.702] stop dss Done [2025-09-24 12:07:36.702] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:07:36.780] /dev/mem opened. [2025-09-24 12:07:36.780] Memory mapped at address 0xffffa4dca000. [2025-09-24 12:07:36.780] Read at address 0x00600018 (0xffffa4dca018): 0x00000000 [2025-09-24 12:07:36.780] Write at address 0x00600018 (0xffffa4dca018): 0x00400040, readback 0x00400040 [2025-09-24 12:07:36.780] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:07:36.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:07:36.956] Loaded PowerVR consumer services. [2025-09-24 12:07:36.988] 512+0 records in [2025-09-24 12:07:36.988] 512+0 records out [2025-09-24 12:07:37.020] Waiting data available... [2025-09-24 12:07:37.036] Starting syslogd/klogd: done [2025-09-24 12:07:37.052] DML Start [2025-09-24 12:07:37.228] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:07:37.451] DML res1: 0 [2025-09-24 12:07:37.898] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:07:37.898] Read Success [2025-09-24 12:07:37.898] Verifying certificate... [2025-09-24 12:07:38.169] Verified OK [2025-09-24 12:07:38.185] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:07:39.821] Verified OK [2025-09-24 12:07:39.821] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:07:40.396] Verified OK [2025-09-24 12:07:40.396] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:07:43.082] fs.protected_hardlinks = 1 [2025-09-24 12:07:43.097] fs.protected_symlinks = 1 [2025-09-24 12:07:43.097] kernel.modules_disabled = 1 [2025-09-24 12:07:43.289] [2025-09-24 12:07:43.289] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:07:44.559] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:07:52.369] SBL1:1210.0.1.0 [2025-09-24 12:07:52.417] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:07:53.984] SBL2:1210.0.1.0 [2025-09-24 12:07:54.016] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 12:07:54.128] j-A [2025-09-24 12:08:01.500] The R5 Autosar Classic is running [2025-09-24 12:08:01.500] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:08:01.500] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:08:02.108] INIT: version 2.96 booting [2025-09-24 12:08:02.220] INIT: Entering runlevel: 5 [2025-09-24 12:08:02.363] mtd24 attached [2025-09-24 12:08:02.379] mtd32 attached [2025-09-24 12:08:02.396] mtd28 attached [2025-09-24 12:08:02.444] RTNETLINK answers: File exists [2025-09-24 12:08:02.444] ubi0:textures is mounted. [2025-09-24 12:08:02.444] ubi1:dml_code is mounted. [2025-09-24 12:08:02.504] ubi2:animations is mounted. [2025-09-24 12:08:02.504] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:08:02.504] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:08:02.504] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:08:02.504] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:08:02.504] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:08:02.504] data.LB_FadeInType0=100 [2025-09-24 12:08:02.504] data.CHLH_FadeInType0=0 [2025-09-24 12:08:02.504] data.WU_FadeInDelay=0 [2025-09-24 12:08:02.504] max_time_out=0 [2025-09-24 12:08:02.504] No splash screen [2025-09-24 12:08:02.504] stop dss Done [2025-09-24 12:08:02.573] /dev/mem opened. [2025-09-24 12:08:02.573] Memory mapped at address 0xffffa2074000. [2025-09-24 12:08:02.573] Read at address 0x00600018 (0xffffa2074018): 0x00000000 [2025-09-24 12:08:02.573] Write at address 0x00600018 (0xffffa2074018): 0x00400040, readback 0x00400040 [2025-09-24 12:08:02.573] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:08:02.589] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:08:02.781] Loaded PowerVR consumer services. [2025-09-24 12:08:02.797] 512+0 records in [2025-09-24 12:08:02.797] 512+0 records out [2025-09-24 12:08:02.862] Starting syslogd/klogd: done [2025-09-24 12:08:02.909] Waiting data available... [2025-09-24 12:08:02.909] DML Start [2025-09-24 12:08:03.085] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:08:03.309] DML res1: 0 [2025-09-24 12:08:03.736] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:08:03.736] Read Success [2025-09-24 12:08:03.736] Verifying certificate... [2025-09-24 12:08:03.960] Verified OK [2025-09-24 12:08:03.976] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:08:05.759] Verified OK [2025-09-24 12:08:05.759] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:08:06.344] Verified OK [2025-09-24 12:08:06.344] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:08:09.011] fs.protected_hardlinks = 1 [2025-09-24 12:08:09.011] fs.protected_symlinks = 1 [2025-09-24 12:08:09.011] kernel.modules_disabled = 1 [2025-09-24 12:08:09.219] [2025-09-24 12:08:09.219] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:08:10.370] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:08:18.104] SBL1:1210.0.1.0 [2025-09-24 12:08:18.152] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:08:19.720] SBL2:1210.0.1.0 [2025-09-24 12:08:19.751] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:08:19.863] j-A [2025-09-24 12:08:27.219] The R5 Autosar Classic is running [2025-09-24 12:08:27.219] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:08:27.240] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:08:27.847] INIT: version 2.96 booting [2025-09-24 12:08:27.959] INIT: Entering runlevel: 5 [2025-09-24 12:08:28.119] mtd24 attached [2025-09-24 12:08:28.119] mtd28 attached [2025-09-24 12:08:28.135] mtd32 attached [2025-09-24 12:08:28.183] RTNETLINK answers: File exists [2025-09-24 12:08:28.248] ubi1:animations is mounted. [2025-09-24 12:08:28.248] ubi0:textures is mounted. [2025-09-24 12:08:28.248] ubi2:dml_code is mounted. [2025-09-24 12:08:28.248] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:08:28.248] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:08:28.248] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:08:28.248] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:08:28.248] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:08:28.248] data.LB_FadeInType0=100 [2025-09-24 12:08:28.248] data.CHLH_FadeInType0=0 [2025-09-24 12:08:28.248] data.WU_FadeInDelay=0 [2025-09-24 12:08:28.248] max_time_out=0 [2025-09-24 12:08:28.248] No splash screen [2025-09-24 12:08:28.248] stop dss Done [2025-09-24 12:08:28.323] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:08:28.323] /dev/mem opened. [2025-09-24 12:08:28.323] Memory mapped at address 0xffffa7f2f000. [2025-09-24 12:08:28.323] Read at address 0x00600018 (0xffffa7f2f018): 0x00000000 [2025-09-24 12:08:28.323] Write at address 0x00600018 (0xffffa7f2f018): 0x00400040, readback 0x00400040 [2025-09-24 12:08:28.323] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:08:28.419] Loaded PowerVR consumer services. [2025-09-24 12:08:28.556] 512+0 records in [2025-09-24 12:08:28.556] 512+0 records out [2025-09-24 12:08:28.556] Waiting data available... [2025-09-24 12:08:28.572] Starting syslogd/klogd: done [2025-09-24 12:08:28.588] DML Start [2025-09-24 12:08:28.780] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:08:28.988] DML res1: 0 [2025-09-24 12:08:29.420] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:08:29.441] Read Success [2025-09-24 12:08:29.441] Verifying certificate... [2025-09-24 12:08:29.681] Verified OK [2025-09-24 12:08:29.697] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:08:31.543] Verified OK [2025-09-24 12:08:31.543] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:08:32.023] Verified OK [2025-09-24 12:08:32.023] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:08:34.453] fs.protected_hardlinks = 1 [2025-09-24 12:08:34.469] fs.protected_symlinks = 1 [2025-09-24 12:08:34.485] kernel.modules_disabled = 1 [2025-09-24 12:08:34.693] [2025-09-24 12:08:34.693] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:08:36.103] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:08:43.840] SBL1:1210.0.1.0 [2025-09-24 12:08:43.872] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:08:45.454] SBL2:1210.0.1.0 [2025-09-24 12:08:45.486] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:08:45.599] j-A [2025-09-24 12:08:52.938] The R5 Autosar Classic is running [2025-09-24 12:08:52.969] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:08:52.969] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:08:53.577] INIT: version 2.96 booting [2025-09-24 12:08:53.689] INIT: Entering runlevel: 5 [2025-09-24 12:08:53.833] mtd28 attached [2025-09-24 12:08:53.849] mtd32 attached [2025-09-24 12:08:53.865] mtd24 attached [2025-09-24 12:08:53.881] ubi0:animations is mounted. [2025-09-24 12:08:53.950] RTNETLINK answers: File exists [2025-09-24 12:08:53.950] ubi1:dml_code is mounted. [2025-09-24 12:08:53.950] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:08:53.950] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:08:53.950] ubi2:textures is mounted. [2025-09-24 12:08:53.950] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:08:53.950] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:08:53.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:08:53.950] data.LB_FadeInType0=100 [2025-09-24 12:08:53.971] data.CHLH_FadeInType0=0 [2025-09-24 12:08:53.971] data.WU_FadeInDelay=0 [2025-09-24 12:08:53.971] max_time_out=0 [2025-09-24 12:08:53.971] No splash screen [2025-09-24 12:08:53.971] stop dss Done [2025-09-24 12:08:54.041] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:08:54.041] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:08:54.041] /dev/mem opened. [2025-09-24 12:08:54.041] Memory mapped at address 0xffffa9157000. [2025-09-24 12:08:54.041] Read at address 0x00600018 (0xffffa9157018): 0x00000000 [2025-09-24 12:08:54.041] Write at address 0x00600018 (0xffffa9157018): 0x00400040, readback 0x00400040 [2025-09-24 12:08:54.153] Loaded PowerVR consumer services. [2025-09-24 12:08:54.265] 512+0 records in [2025-09-24 12:08:54.265] 512+0 records out [2025-09-24 12:08:54.280] Waiting data available... [2025-09-24 12:08:54.312] Starting syslogd/klogd: done [2025-09-24 12:08:54.344] DML Start [2025-09-24 12:08:54.537] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:08:54.745] DML res1: 0 [2025-09-24 12:08:55.233] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:08:55.233] Read Success [2025-09-24 12:08:55.233] Verifying certificate... [2025-09-24 12:08:55.472] Verified OK [2025-09-24 12:08:55.488] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:08:57.183] Verified OK [2025-09-24 12:08:57.199] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:08:57.748] Verified OK [2025-09-24 12:08:57.748] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:09:00.242] fs.protected_hardlinks = 1 [2025-09-24 12:09:00.242] fs.protected_symlinks = 1 [2025-09-24 12:09:00.257] kernel.modules_disabled = 1 [2025-09-24 12:09:00.449] [2025-09-24 12:09:00.449] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:09:01.846] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:09:09.571] SBL1:1210.0.1.0 [2025-09-24 12:09:09.619] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:09:11.185] SBL2:1210.0.1.0 [2025-09-24 12:09:11.217] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:09:11.329] j-A [2025-09-24 12:09:18.704] The R5 Autosar Classic is running [2025-09-24 12:09:18.704] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:09:18.704] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:09:19.312] INIT: version 2.96 booting [2025-09-24 12:09:19.425] INIT: Entering runlevel: 5 [2025-09-24 12:09:19.568] mtd24 attached [2025-09-24 12:09:19.584] mtd28 attached [2025-09-24 12:09:19.600] mtd32 attached [2025-09-24 12:09:19.706] RTNETLINK answers: File exists [2025-09-24 12:09:19.706] ubi1:animations is mounted. [2025-09-24 12:09:19.706] ubi0:textures is mounted. [2025-09-24 12:09:19.706] ubi2:dml_code is mounted. [2025-09-24 12:09:19.706] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:09:19.706] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:09:19.706] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:09:19.706] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:09:19.706] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:09:19.706] data.LB_FadeInType0=100 [2025-09-24 12:09:19.706] data.CHLH_FadeInType0=0 [2025-09-24 12:09:19.706] data.WU_FadeInDelay=0 [2025-09-24 12:09:19.706] max_time_out=0 [2025-09-24 12:09:19.706] No splash screen [2025-09-24 12:09:19.706] stop dss Done [2025-09-24 12:09:19.737] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:09:19.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:09:19.790] /dev/mem opened. [2025-09-24 12:09:19.790] Memory mapped at address 0xffff90b48000. [2025-09-24 12:09:19.790] Read at address 0x00600018 (0xffff90b48018): 0x00000000 [2025-09-24 12:09:19.790] Write at address 0x00600018 (0xffff90b48018): 0x00400040, readback 0x00400040 [2025-09-24 12:09:19.934] Loaded PowerVR consumer services. [2025-09-24 12:09:19.966] 512+0 records in [2025-09-24 12:09:19.966] 512+0 records out [2025-09-24 12:09:20.014] Starting syslogd/klogd: done [2025-09-24 12:09:20.110] Waiting data available... [2025-09-24 12:09:20.110] DML Start [2025-09-24 12:09:20.302] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:09:20.526] DML res1: 0 [2025-09-24 12:09:21.038] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:09:21.054] Read Success [2025-09-24 12:09:21.054] Verifying certificate... [2025-09-24 12:09:21.293] Verified OK [2025-09-24 12:09:21.309] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:09:23.084] Verified OK [2025-09-24 12:09:23.084] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:09:23.628] Verified OK [2025-09-24 12:09:23.649] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:09:26.112] fs.protected_hardlinks = 1 [2025-09-24 12:09:26.112] fs.protected_symlinks = 1 [2025-09-24 12:09:26.128] kernel.modules_disabled = 1 [2025-09-24 12:09:26.319] [2025-09-24 12:09:26.319] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:09:27.534] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:09:35.305] SBL1:1210.0.1.0 [2025-09-24 12:09:35.353] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:09:36.920] SBL2:1210.0.1.0 [2025-09-24 12:09:36.952] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:09:37.063] j-A [2025-09-24 12:09:44.438] The R5 Autosar Classic is running [2025-09-24 12:09:44.438] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:09:44.438] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:09:45.045] INIT: version 2.96 booting [2025-09-24 12:09:45.157] INIT: Entering runlevel: 5 [2025-09-24 12:09:45.301] mtd24 attached [2025-09-24 12:09:45.317] mtd28 attached [2025-09-24 12:09:45.333] mtd32 attached [2025-09-24 12:09:45.435] RTNETLINK answers: File exists [2025-09-24 12:09:45.435] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:09:45.435] ubi1:animations is mounted. [2025-09-24 12:09:45.435] ubi0:textures is mounted. [2025-09-24 12:09:45.435] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:09:45.435] ubi2:dml_code is mounted. [2025-09-24 12:09:45.435] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:09:45.435] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:09:45.435] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:09:45.435] data.LB_FadeInType0=100 [2025-09-24 12:09:45.435] data.CHLH_FadeInType0=0 [2025-09-24 12:09:45.435] data.WU_FadeInDelay=0 [2025-09-24 12:09:45.435] max_time_out=0 [2025-09-24 12:09:45.435] No splash screen [2025-09-24 12:09:45.435] stop dss Done [2025-09-24 12:09:45.502] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:09:45.502] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:09:45.502] /dev/mem opened. [2025-09-24 12:09:45.502] Memory mapped at address 0xffffb5278000. [2025-09-24 12:09:45.502] Read at address 0x00600018 (0xffffb5278018): 0x00000000 [2025-09-24 12:09:45.502] Write at address 0x00600018 (0xffffb5278018): 0x00400040, readback 0x00400040 [2025-09-24 12:09:45.597] Loaded PowerVR consumer services. [2025-09-24 12:09:45.726] 512+0 records in [2025-09-24 12:09:45.726] 512+0 records out [2025-09-24 12:09:45.742] Waiting data available... [2025-09-24 12:09:45.758] Starting syslogd/klogd: done [2025-09-24 12:09:45.774] DML Start [2025-09-24 12:09:45.934] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:09:46.141] DML res1: 0 [2025-09-24 12:09:46.645] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:09:46.645] Read Success [2025-09-24 12:09:46.645] Verifying certificate... [2025-09-24 12:09:46.885] Verified OK [2025-09-24 12:09:46.901] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:09:48.561] Verified OK [2025-09-24 12:09:48.561] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:09:49.073] Verified OK [2025-09-24 12:09:49.073] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:09:51.791] fs.protected_hardlinks = 1 [2025-09-24 12:09:51.791] fs.protected_symlinks = 1 [2025-09-24 12:09:51.807] kernel.modules_disabled = 1 [2025-09-24 12:09:51.999] [2025-09-24 12:09:51.999] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:09:53.285] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:10:01.051] SBL1:1210.0.1.0 [2025-09-24 12:10:01.083] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:10:02.666] SBL2:1210.0.1.0 [2025-09-24 12:10:02.698] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:10:02.810] j-A [2025-09-24 12:10:10.148] The R5 Autosar Classic is running [2025-09-24 12:10:10.180] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:10:10.180] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:10:10.788] INIT: version 2.96 booting [2025-09-24 12:10:10.900] INIT: Entering runlevel: 5 [2025-09-24 12:10:11.044] mtd24 attached [2025-09-24 12:10:11.060] mtd28 attached [2025-09-24 12:10:11.076] mtd32 attached [2025-09-24 12:10:11.108] ubi0:textures is mounted. [2025-09-24 12:10:11.124] ubi1:animations is mounted. [2025-09-24 12:10:11.124] RTNETLINK answers: File exists [2025-09-24 12:10:11.156] ubi2:dml_code is mounted. [2025-09-24 12:10:11.156] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:10:11.156] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:10:11.156] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:10:11.156] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:10:11.184] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:10:11.184] data.LB_FadeInType0=100 [2025-09-24 12:10:11.184] data.CHLH_FadeInType0=0 [2025-09-24 12:10:11.184] data.WU_FadeInDelay=0 [2025-09-24 12:10:11.184] max_time_out=0 [2025-09-24 12:10:11.184] No splash screen [2025-09-24 12:10:11.184] stop dss Done [2025-09-24 12:10:11.232] /dev/mem opened. [2025-09-24 12:10:11.232] Memory mapped at address 0xffffb43d0000. [2025-09-24 12:10:11.258] Read at address 0x00600018 (0xffffb43d0018): 0x00000000 [2025-09-24 12:10:11.258] Write at address 0x00600018 (0xffffb43d0018): 0x00400040, readback 0x00400040 [2025-09-24 12:10:11.288] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:10:11.288] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:10:11.353] Loaded PowerVR consumer services. [2025-09-24 12:10:11.480] 512+0 records in [2025-09-24 12:10:11.480] 512+0 records out [2025-09-24 12:10:11.496] Waiting data available... [2025-09-24 12:10:11.528] Starting syslogd/klogd: done [2025-09-24 12:10:11.544] DML Start [2025-09-24 12:10:11.720] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:10:11.928] DML res1: 0 [2025-09-24 12:10:12.404] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:10:12.404] Read Success [2025-09-24 12:10:12.404] Verifying certificate... [2025-09-24 12:10:12.644] Verified OK [2025-09-24 12:10:12.660] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:10:14.377] Verified OK [2025-09-24 12:10:14.377] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:10:14.879] Verified OK [2025-09-24 12:10:14.879] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:10:17.566] fs.protected_hardlinks = 1 [2025-09-24 12:10:17.596] fs.protected_symlinks = 1 [2025-09-24 12:10:17.596] kernel.modules_disabled = 1 [2025-09-24 12:10:17.787] [2025-09-24 12:10:17.787] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:10:19.025] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:10:26.769] SBL1:1210.0.1.0 [2025-09-24 12:10:26.817] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:10:28.384] SBL2:1210.0.1.0 [2025-09-24 12:10:28.432] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:10:28.529] j-A [2025-09-24 12:10:35.883] The R5 Autosar Classic is running [2025-09-24 12:10:35.905] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:10:35.905] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:10:36.512] INIT: version 2.96 booting [2025-09-24 12:10:36.624] INIT: Entering runlevel: 5 [2025-09-24 12:10:36.769] mtd32 attached [2025-09-24 12:10:36.785] mtd24 attached [2025-09-24 12:10:36.785] mtd28 attached [2025-09-24 12:10:36.833] ubi0:dml_code is mounted. [2025-09-24 12:10:36.848] RTNETLINK answers: File exists [2025-09-24 12:10:36.901] ubi1:textures is mounted. [2025-09-24 12:10:36.901] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:10:36.901] ubi2:animations is mounted. [2025-09-24 12:10:36.901] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:10:36.901] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:10:36.901] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:10:36.901] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:10:36.901] data.LB_FadeInType0=100 [2025-09-24 12:10:36.901] data.CHLH_FadeInType0=0 [2025-09-24 12:10:36.901] data.WU_FadeInDelay=0 [2025-09-24 12:10:36.901] max_time_out=0 [2025-09-24 12:10:36.901] No splash screen [2025-09-24 12:10:36.901] stop dss Done [2025-09-24 12:10:36.933] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:10:36.981] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:10:36.981] /dev/mem opened. [2025-09-24 12:10:36.981] Memory mapped at address 0xffff88ac0000. [2025-09-24 12:10:36.981] Read at address 0x00600018 (0xffff88ac0018): 0x00000000 [2025-09-24 12:10:36.981] Write at address 0x00600018 (0xffff88ac0018): 0x00400040, readback 0x00400040 [2025-09-24 12:10:37.173] Loaded PowerVR consumer services. [2025-09-24 12:10:37.236] Waiting data available... [2025-09-24 12:10:37.236] 512+0 records in [2025-09-24 12:10:37.236] 512+0 records out [2025-09-24 12:10:37.268] Starting syslogd/klogd: done [2025-09-24 12:10:37.283] DML Start [2025-09-24 12:10:37.492] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:10:37.700] DML res1: 0 [2025-09-24 12:10:38.140] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:10:38.140] Read Success [2025-09-24 12:10:38.140] Verifying certificate... [2025-09-24 12:10:38.365] Verified OK [2025-09-24 12:10:38.380] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:10:39.911] Verified OK [2025-09-24 12:10:39.911] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:10:40.534] Verified OK [2025-09-24 12:10:40.556] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:10:43.435] fs.protected_hardlinks = 1 [2025-09-24 12:10:43.435] fs.protected_symlinks = 1 [2025-09-24 12:10:43.451] kernel.modules_disabled = 1 [2025-09-24 12:10:43.626] [2025-09-24 12:10:43.626] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:10:44.802] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:10:52.509] SBL1:1210.0.1.0 [2025-09-24 12:10:52.541] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:10:54.124] SBL2:1210.0.1.0 [2025-09-24 12:10:54.156] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:10:54.268] j-A [2025-09-24 12:11:01.607] The R5 Autosar Classic is running [2025-09-24 12:11:01.632] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:11:01.632] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:11:02.239] INIT: version 2.96 booting [2025-09-24 12:11:02.351] INIT: Entering runlevel: 5 [2025-09-24 12:11:02.495] mtd24 attached [2025-09-24 12:11:02.511] mtd28 attached [2025-09-24 12:11:02.527] mtd32 attached [2025-09-24 12:11:02.575] ubi0:textures is mounted. [2025-09-24 12:11:02.576] ubi1:animations is mounted. [2025-09-24 12:11:02.640] RTNETLINK answers: File exists [2025-09-24 12:11:02.640] ubi2:dml_code is mounted. [2025-09-24 12:11:02.640] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:11:02.640] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:11:02.640] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:11:02.640] data.LB_FadeInType0=100 [2025-09-24 12:11:02.640] data.CHLH_FadeInType0=0 [2025-09-24 12:11:02.640] data.WU_FadeInDelay=0 [2025-09-24 12:11:02.640] max_time_out=0 [2025-09-24 12:11:02.640] No splash screen [2025-09-24 12:11:02.640] stop dss Done [2025-09-24 12:11:02.640] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:11:02.640] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:11:02.715] /dev/mem opened. [2025-09-24 12:11:02.715] Memory mapped at address 0xffffa0422000. [2025-09-24 12:11:02.715] Read at address 0x00600018 (0xffffa0422018): 0x00000000 [2025-09-24 12:11:02.715] Write at address 0x00600018 (0xffffa0422018): 0x00400040, readback 0x00400040 [2025-09-24 12:11:02.715] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:11:02.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:11:02.859] Loaded PowerVR consumer services. [2025-09-24 12:11:02.939] 512+0 records in [2025-09-24 12:11:02.939] 512+0 records out [2025-09-24 12:11:02.971] Waiting data available... [2025-09-24 12:11:02.987] Starting syslogd/klogd: done [2025-09-24 12:11:03.003] DML Start [2025-09-24 12:11:03.195] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:11:03.419] DML res1: 0 [2025-09-24 12:11:03.851] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:11:03.871] Read Success [2025-09-24 12:11:03.871] Verifying certificate... [2025-09-24 12:11:04.127] Verified OK [2025-09-24 12:11:04.143] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:11:05.774] Verified OK [2025-09-24 12:11:05.774] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:11:06.460] Verified OK [2025-09-24 12:11:06.460] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:11:09.130] fs.protected_hardlinks = 1 [2025-09-24 12:11:09.146] fs.protected_symlinks = 1 [2025-09-24 12:11:09.146] kernel.modules_disabled = 1 [2025-09-24 12:11:09.338] [2025-09-24 12:11:09.338] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:11:10.511] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:11:18.248] SBL1:1210.0.1.0 [2025-09-24 12:11:18.296] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:11:19.864] SBL2:1210.0.1.0 [2025-09-24 12:11:19.912] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:11:20.007] j-A [2025-09-24 12:11:27.362] The R5 Autosar Classic is running [2025-09-24 12:11:27.383] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:11:27.383] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:11:27.991] INIT: version 2.96 booting [2025-09-24 12:11:28.102] INIT: Entering runlevel: 5 [2025-09-24 12:11:28.246] mtd24 attached [2025-09-24 12:11:28.262] mtd28 attached [2025-09-24 12:11:28.278] mtd32 attached [2025-09-24 12:11:28.326] ubi0:textures is mounted. [2025-09-24 12:11:28.391] RTNETLINK answers: File exists [2025-09-24 12:11:28.391] ubi2:dml_code is mounted. [2025-09-24 12:11:28.391] ubi1:animations is mounted. [2025-09-24 12:11:28.391] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:11:28.391] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:11:28.391] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:11:28.391] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:11:28.391] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:11:28.391] data.LB_FadeInType0=100 [2025-09-24 12:11:28.391] data.CHLH_FadeInType0=0 [2025-09-24 12:11:28.391] data.WU_FadeInDelay=0 [2025-09-24 12:11:28.391] max_time_out=0 [2025-09-24 12:11:28.391] No splash screen [2025-09-24 12:11:28.391] stop dss Done [2025-09-24 12:11:28.477] /dev/mem opened. [2025-09-24 12:11:28.477] Memory mapped at address 0xffffa0cf9000. [2025-09-24 12:11:28.477] Read at address 0x00600018 (0xffffa0cf9018): 0x00000000 [2025-09-24 12:11:28.477] Write at address 0x00600018 (0xffffa0cf9018): 0x00400040, readback 0x00400040 [2025-09-24 12:11:28.506] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:11:28.506] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:11:28.650] Loaded PowerVR consumer services. [2025-09-24 12:11:28.665] 512+0 records in [2025-09-24 12:11:28.665] 512+0 records out [2025-09-24 12:11:28.729] Starting syslogd/klogd: done [2025-09-24 12:11:28.762] Waiting data available... [2025-09-24 12:11:28.762] DML Start [2025-09-24 12:11:28.954] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:11:29.193] DML res1: 0 [2025-09-24 12:11:29.593] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:11:29.609] Read Success [2025-09-24 12:11:29.609] Verifying certificate... [2025-09-24 12:11:29.833] Verified OK [2025-09-24 12:11:29.849] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:11:31.480] Verified OK [2025-09-24 12:11:31.480] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:11:32.097] Verified OK [2025-09-24 12:11:32.097] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:11:34.751] fs.protected_hardlinks = 1 [2025-09-24 12:11:34.751] fs.protected_symlinks = 1 [2025-09-24 12:11:34.766] kernel.modules_disabled = 1 [2025-09-24 12:11:34.959] [2025-09-24 12:11:34.959] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:11:36.242] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:11:43.998] SBL1:1210.0.1.0 [2025-09-24 12:11:44.030] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:11:45.613] SBL2:1210.0.1.0 [2025-09-24 12:11:45.645] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:11:45.757] j-A [2025-09-24 12:11:53.095] The R5 Autosar Classic is running [2025-09-24 12:11:53.120] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:11:53.120] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:11:53.729] INIT: version 2.96 booting [2025-09-24 12:11:53.840] INIT: Entering runlevel: 5 [2025-09-24 12:11:54.000] mtd24 attached [2025-09-24 12:11:54.000] mtd28 attached [2025-09-24 12:11:54.016] mtd32 attached [2025-09-24 12:11:54.136] ubi0:textures is mounted. [2025-09-24 12:11:54.136] RTNETLINK answers: File exists [2025-09-24 12:11:54.136] ubi2:dml_code is mounted. [2025-09-24 12:11:54.136] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:11:54.136] ubi1:animations is mounted. [2025-09-24 12:11:54.136] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:11:54.136] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:11:54.136] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:11:54.136] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:11:54.136] data.LB_FadeInType0=100 [2025-09-24 12:11:54.136] data.CHLH_FadeInType0=0 [2025-09-24 12:11:54.136] data.WU_FadeInDelay=0 [2025-09-24 12:11:54.136] max_time_out=0 [2025-09-24 12:11:54.136] No splash screen [2025-09-24 12:11:54.136] stop dss Done [2025-09-24 12:11:54.175] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:11:54.175] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:11:54.215] /dev/mem opened. [2025-09-24 12:11:54.215] Memory mapped at address 0xffff9026f000. [2025-09-24 12:11:54.215] Read at address 0x00600018 (0xffff9026f018): 0x00000000 [2025-09-24 12:11:54.215] Write at address 0x00600018 (0xffff9026f018): 0x00400040, readback 0x00400040 [2025-09-24 12:11:54.311] Loaded PowerVR consumer services. [2025-09-24 12:11:54.451] 512+0 records in [2025-09-24 12:11:54.451] 512+0 records out [2025-09-24 12:11:54.451] Waiting data available... [2025-09-24 12:11:54.483] Starting syslogd/klogd: done [2025-09-24 12:11:54.498] DML Start [2025-09-24 12:11:54.675] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:11:54.915] DML res1: 0 [2025-09-24 12:11:55.379] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:11:55.394] Read Success [2025-09-24 12:11:55.394] Verifying certificate... [2025-09-24 12:11:55.634] Verified OK [2025-09-24 12:11:55.650] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:11:57.206] Verified OK [2025-09-24 12:11:57.206] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:11:57.797] Verified OK [2025-09-24 12:11:57.797] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:12:00.563] fs.protected_hardlinks = 1 [2025-09-24 12:12:00.579] fs.protected_symlinks = 1 [2025-09-24 12:12:00.579] kernel.modules_disabled = 1 [2025-09-24 12:12:00.771] [2025-09-24 12:12:00.771] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:12:02.000] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:12:09.736] SBL1:1210.0.1.0 [2025-09-24 12:12:09.767] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:12:11.349] SBL2:1210.0.1.0 [2025-09-24 12:12:11.381] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:12:11.494] j-A [2025-09-24 12:12:18.833] The R5 Autosar Classic is running [2025-09-24 12:12:18.858] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:12:18.858] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:12:19.465] INIT: version 2.96 booting [2025-09-24 12:12:19.577] INIT: Entering runlevel: 5 [2025-09-24 12:12:19.722] mtd24 attached [2025-09-24 12:12:19.738] mtd28 attached [2025-09-24 12:12:19.754] mtd32 attached [2025-09-24 12:12:19.802] RTNETLINK answers: File exists [2025-09-24 12:12:19.802] ubi0:textures is mounted. [2025-09-24 12:12:19.841] ubi2:dml_code is mounted. [2025-09-24 12:12:19.841] ubi1:animations is mounted. [2025-09-24 12:12:19.841] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:12:19.841] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:12:19.841] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:12:19.873] data.LB_FadeInType0=100 [2025-09-24 12:12:19.873] data.CHLH_FadeInType0=0 [2025-09-24 12:12:19.873] data.WU_FadeInDelay=0 [2025-09-24 12:12:19.873] max_time_out=0 [2025-09-24 12:12:19.873] No splash screen [2025-09-24 12:12:19.873] stop dss Done [2025-09-24 12:12:19.873] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:12:19.873] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:12:19.905] /dev/mem opened. [2025-09-24 12:12:19.905] Memory mapped at address 0xffff9a6ee000. [2025-09-24 12:12:19.947] Read at address 0x00600018 (0xffff9a6ee018): 0x00000000 [2025-09-24 12:12:19.947] Write at address 0x00600018 (0xffff9a6ee018): 0x00400040, readback 0x00400040 [2025-09-24 12:12:19.947] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:12:19.947] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:12:20.044] Loaded PowerVR consumer services. [2025-09-24 12:12:20.180] Waiting data available... [2025-09-24 12:12:20.180] 512+0 records in [2025-09-24 12:12:20.180] 512+0 records out [2025-09-24 12:12:20.212] Starting syslogd/klogd: done [2025-09-24 12:12:20.228] DML Start [2025-09-24 12:12:20.420] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:12:20.691] DML res1: 0 [2025-09-24 12:12:21.027] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:12:21.043] Read Success [2025-09-24 12:12:21.043] Verifying certificate... [2025-09-24 12:12:21.283] Verified OK [2025-09-24 12:12:21.299] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:12:22.796] Verified OK [2025-09-24 12:12:22.796] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:12:23.482] Verified OK [2025-09-24 12:12:23.482] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:12:26.328] fs.protected_hardlinks = 1 [2025-09-24 12:12:26.328] fs.protected_symlinks = 1 [2025-09-24 12:12:26.343] kernel.modules_disabled = 1 [2025-09-24 12:12:26.520] [2025-09-24 12:12:26.520] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:12:27.748] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:12:35.487] SBL1:1210.0.1.0 [2025-09-24 12:12:35.519] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:12:37.101] SBL2:1210.0.1.0 [2025-09-24 12:12:37.133] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:12:37.229] j-A [2025-09-24 12:12:44.606] The R5 Autosar Classic is running [2025-09-24 12:12:44.606] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:12:44.606] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:12:45.213] INIT: version 2.96 booting [2025-09-24 12:12:45.309] INIT: Entering runlevel: 5 [2025-09-24 12:12:45.470] mtd24 attached [2025-09-24 12:12:45.485] mtd32 attached [2025-09-24 12:12:45.501] mtd28 attached [2025-09-24 12:12:45.533] ubi0:textures is mounted. [2025-09-24 12:12:45.549] RTNETLINK answers: File exists [2025-09-24 12:12:45.600] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:12:45.600] ubi2:animations is mounted. [2025-09-24 12:12:45.600] ubi1:dml_code is mounted. [2025-09-24 12:12:45.600] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:12:45.600] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:12:45.600] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:12:45.600] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:12:45.600] data.LB_FadeInType0=100 [2025-09-24 12:12:45.600] data.CHLH_FadeInType0=0 [2025-09-24 12:12:45.600] data.WU_FadeInDelay=0 [2025-09-24 12:12:45.600] max_time_out=0 [2025-09-24 12:12:45.600] No splash screen [2025-09-24 12:12:45.600] stop dss Done [2025-09-24 12:12:45.648] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:12:45.685] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:12:45.685] /dev/mem opened. [2025-09-24 12:12:45.685] Memory mapped at address 0xffffb9c0b000. [2025-09-24 12:12:45.685] Read at address 0x00600018 (0xffffb9c0b018): 0x00000000 [2025-09-24 12:12:45.685] Write at address 0x00600018 (0xffffb9c0b018): 0x00400040, readback 0x00400040 [2025-09-24 12:12:45.780] Loaded PowerVR consumer services. [2025-09-24 12:12:45.893] 512+0 records in [2025-09-24 12:12:45.909] 512+0 records out [2025-09-24 12:12:45.925] Starting syslogd/klogd: Waiting data available... [2025-09-24 12:12:45.941] done [2025-09-24 12:12:45.957] DML Start [2025-09-24 12:12:46.180] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:12:46.389] DML res1: 0 [2025-09-24 12:12:46.788] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:12:46.809] Read Success [2025-09-24 12:12:46.809] Verifying certificate... [2025-09-24 12:12:47.065] Verified OK [2025-09-24 12:12:47.081] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:12:48.647] Verified OK [2025-09-24 12:12:48.647] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:12:49.158] Verified OK [2025-09-24 12:12:49.179] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:12:52.010] fs.protected_hardlinks = 1 [2025-09-24 12:12:52.010] fs.protected_symlinks = 1 [2025-09-24 12:12:52.025] kernel.modules_disabled = 1 [2025-09-24 12:12:52.217] [2025-09-24 12:12:52.217] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:12:53.442] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:13:01.260] SBL1:1210.0.1.0 [2025-09-24 12:13:01.292] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:13:02.875] SBL2:1210.0.1.0 [2025-09-24 12:13:02.907] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:13:03.002] j-A [2025-09-24 12:13:10.358] The R5 Autosar Classic is running [2025-09-24 12:13:10.382] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:13:10.382] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:13:10.990] INIT: version 2.96 booting [2025-09-24 12:13:11.101] INIT: Entering runlevel: 5 [2025-09-24 12:13:11.246] mtd28 attached [2025-09-24 12:13:11.262] mtd24 attached [2025-09-24 12:13:11.278] mtd32 attached [2025-09-24 12:13:11.309] ubi0:animations is mounted. [2025-09-24 12:13:11.325] RTNETLINK answers: File exists [2025-09-24 12:13:11.382] ubi1:textures is mounted. [2025-09-24 12:13:11.382] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:13:11.382] ubi2:dml_code is mounted. [2025-09-24 12:13:11.382] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:13:11.383] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:13:11.383] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:13:11.383] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:13:11.383] data.LB_FadeInType0=100 [2025-09-24 12:13:11.383] data.CHLH_FadeInType0=0 [2025-09-24 12:13:11.383] data.WU_FadeInDelay=0 [2025-09-24 12:13:11.383] max_time_out=0 [2025-09-24 12:13:11.383] No splash screen [2025-09-24 12:13:11.383] stop dss Done [2025-09-24 12:13:11.427] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:13:11.427] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:13:11.427] /dev/mem opened. [2025-09-24 12:13:11.453] Memory mapped at address 0xffff91c0b000. [2025-09-24 12:13:11.453] Read at address 0x00600018 (0xffff91c0b018): 0x00000000 [2025-09-24 12:13:11.453] Write at address 0x00600018 (0xffff91c0b018): 0x00400040, readback 0x00400040 [2025-09-24 12:13:11.533] Loaded PowerVR consumer services. [2025-09-24 12:13:11.678] 512+0 records in [2025-09-24 12:13:11.678] 512+0 records out [2025-09-24 12:13:11.693] Waiting data available... [2025-09-24 12:13:11.725] Starting syslogd/klogd: done [2025-09-24 12:13:11.741] DML Start [2025-09-24 12:13:11.933] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:13:12.157] DML res1: 0 [2025-09-24 12:13:12.596] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:13:12.596] Read Success [2025-09-24 12:13:12.596] Verifying certificate... [2025-09-24 12:13:12.853] Verified OK [2025-09-24 12:13:12.869] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:13:14.648] Verified OK [2025-09-24 12:13:14.648] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:13:15.208] Verified OK [2025-09-24 12:13:15.229] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:13:17.738] fs.protected_hardlinks = 1 [2025-09-24 12:13:17.754] fs.protected_symlinks = 1 [2025-09-24 12:13:17.754] kernel.modules_disabled = 1 [2025-09-24 12:13:17.946] [2025-09-24 12:13:17.946] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:13:19.264] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:13:26.982] SBL1:1210.0.1.0 [2025-09-24 12:13:27.014] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:13:28.596] SBL2:1210.0.1.0 [2025-09-24 12:13:28.628] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:13:28.724] j-A [2025-09-24 12:13:36.080] The R5 Autosar Classic is running [2025-09-24 12:13:36.104] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:13:36.104] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:13:36.712] INIT: version 2.96 booting [2025-09-24 12:13:36.823] INIT: Entering runlevel: 5 [2025-09-24 12:13:36.984] mtd28 attached [2025-09-24 12:13:36.984] mtd24 attached [2025-09-24 12:13:37.000] mtd32 attached [2025-09-24 12:13:37.047] RTNETLINK answers: File exists [2025-09-24 12:13:37.047] ubi0:animations is mounted. [2025-09-24 12:13:37.081] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:13:37.081] ubi1:textures is mounted. [2025-09-24 12:13:37.081] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:13:37.081] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:13:37.081] ubi2:dml_code is mounted. [2025-09-24 12:13:37.081] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:13:37.081] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:13:37.097] data.LB_FadeInType0=100 [2025-09-24 12:13:37.138] data.CHLH_FadeInType0=0 [2025-09-24 12:13:37.138] data.WU_FadeInDelay=0 [2025-09-24 12:13:37.138] max_time_out=0 [2025-09-24 12:13:37.138] No splash screen [2025-09-24 12:13:37.138] stop dss Done [2025-09-24 12:13:37.138] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:13:37.138] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:13:37.192] /dev/mem opened. [2025-09-24 12:13:37.192] Memory mapped at address 0xffffb9966000. [2025-09-24 12:13:37.192] Read at address 0x00600018 (0xffffb9966018): 0x00000000 [2025-09-24 12:13:37.192] Write at address 0x00600018 (0xffffb9966018): 0x00400040, readback 0x00400040 [2025-09-24 12:13:37.273] Loaded PowerVR consumer services. [2025-09-24 12:13:37.400] 512+0 records in [2025-09-24 12:13:37.400] 512+0 records out [2025-09-24 12:13:37.432] Waiting data available... [2025-09-24 12:13:37.448] Starting syslogd/klogd: done [2025-09-24 12:13:37.464] DML Start [2025-09-24 12:13:37.656] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:13:37.880] DML res1: 0 [2025-09-24 12:13:38.271] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:13:38.271] Read Success [2025-09-24 12:13:38.271] Verifying certificate... [2025-09-24 12:13:38.510] Verified OK [2025-09-24 12:13:38.526] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:13:40.085] Verified OK [2025-09-24 12:13:40.085] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:13:40.670] Verified OK [2025-09-24 12:13:40.670] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:13:43.579] fs.protected_hardlinks = 1 [2025-09-24 12:13:43.596] fs.protected_symlinks = 1 [2025-09-24 12:13:43.596] kernel.modules_disabled = 1 [2025-09-24 12:13:43.787] [2025-09-24 12:13:43.787] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:13:44.978] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:13:52.712] SBL1:1210.0.1.0 [2025-09-24 12:13:52.760] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:13:54.326] SBL2:1210.0.1.0 [2025-09-24 12:13:54.373] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:13:54.470] j-A [2025-09-24 12:14:01.826] The R5 Autosar Classic is running [2025-09-24 12:14:01.826] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:14:01.847] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:14:02.455] INIT: version 2.96 booting [2025-09-24 12:14:02.566] INIT: Entering runlevel: 5 [2025-09-24 12:14:02.727] mtd24 attached [2025-09-24 12:14:02.727] mtd28 attached [2025-09-24 12:14:02.743] mtd32 attached [2025-09-24 12:14:02.791] RTNETLINK answers: File exists [2025-09-24 12:14:02.807] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:14:02.807] ubi2:dml_code is mounted. [2025-09-24 12:14:02.841] ubi1:animations is mounted. [2025-09-24 12:14:02.841] ubi0:textures is mounted. [2025-09-24 12:14:02.841] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:14:02.841] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:14:02.841] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:14:02.841] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:14:02.841] data.LB_FadeInType0=100 [2025-09-24 12:14:02.862] data.CHLH_FadeInType0=0 [2025-09-24 12:14:02.862] data.WU_FadeInDelay=0 [2025-09-24 12:14:02.862] max_time_out=0 [2025-09-24 12:14:02.862] No splash screen [2025-09-24 12:14:02.862] stop dss Done [2025-09-24 12:14:02.903] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:14:02.903] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:14:02.903] /dev/mem opened. [2025-09-24 12:14:02.903] Memory mapped at address 0xffff9e3ef000. [2025-09-24 12:14:02.930] Read at address 0x00600018 (0xffff9e3ef018): 0x00000000 [2025-09-24 12:14:02.930] Write at address 0x00600018 (0xffff9e3ef018): 0x00400040, readback 0x00400040 [2025-09-24 12:14:03.041] Loaded PowerVR consumer services. [2025-09-24 12:14:03.174] Waiting data available... [2025-09-24 12:14:03.174] 512+0 records in [2025-09-24 12:14:03.174] 512+0 records out [2025-09-24 12:14:03.206] Starting syslogd/klogd: done [2025-09-24 12:14:03.222] DML Start [2025-09-24 12:14:03.414] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:14:03.637] DML res1: 0 [2025-09-24 12:14:04.085] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:14:04.111] Read Success [2025-09-24 12:14:04.111] Verifying certificate... [2025-09-24 12:14:04.336] Verified OK [2025-09-24 12:14:04.351] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:14:06.159] Verified OK [2025-09-24 12:14:06.159] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:14:06.670] Verified OK [2025-09-24 12:14:06.670] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:14:09.068] fs.protected_hardlinks = 1 [2025-09-24 12:14:09.068] fs.protected_symlinks = 1 [2025-09-24 12:14:09.085] kernel.modules_disabled = 1 [2025-09-24 12:14:09.293] [2025-09-24 12:14:09.293] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:14:10.743] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:14:18.458] SBL1:1210.0.1.0 [2025-09-24 12:14:18.490] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:14:20.073] SBL2:1210.0.1.0 [2025-09-24 12:14:20.104] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:14:20.217] j-A [2025-09-24 12:14:27.556] The R5 Autosar Classic is running [2025-09-24 12:14:27.581] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:14:27.581] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:14:28.188] INIT: version 2.96 booting [2025-09-24 12:14:28.300] INIT: Entering runlevel: 5 [2025-09-24 12:14:28.445] mtd24 attached [2025-09-24 12:14:28.461] mtd28 attached [2025-09-24 12:14:28.477] mtd32 attached [2025-09-24 12:14:28.508] ubi0:textures is mounted. [2025-09-24 12:14:28.524] ubi1:animations is mounted. [2025-09-24 12:14:28.581] RTNETLINK answers: File exists [2025-09-24 12:14:28.581] ubi2:dml_code is mounted. [2025-09-24 12:14:28.581] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:14:28.581] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:14:28.581] data.LB_FadeInType0=100 [2025-09-24 12:14:28.581] data.CHLH_FadeInType0=0 [2025-09-24 12:14:28.581] data.WU_FadeInDelay=0 [2025-09-24 12:14:28.581] max_time_out=0 [2025-09-24 12:14:28.581] No splash screen [2025-09-24 12:14:28.581] stop dss Done [2025-09-24 12:14:28.581] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:14:28.581] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:14:28.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:14:28.650] /dev/mem opened. [2025-09-24 12:14:28.650] Memory mapped at address 0xffffbbe87000. [2025-09-24 12:14:28.650] Read at address 0x00600018 (0xffffbbe87018): 0x00000000 [2025-09-24 12:14:28.650] Write at address 0x00600018 (0xffffbbe87018): 0x00400040, readback 0x00400040 [2025-09-24 12:14:28.698] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:14:28.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:14:28.843] Loaded PowerVR consumer services. [2025-09-24 12:14:28.874] 512+0 records in [2025-09-24 12:14:28.874] 512+0 records out [2025-09-24 12:14:28.906] Waiting data available... [2025-09-24 12:14:28.922] Starting syslogd/klogd: done [2025-09-24 12:14:28.939] DML Start [2025-09-24 12:14:29.098] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:14:29.322] DML res1: 0 [2025-09-24 12:14:29.831] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:14:29.831] Read Success [2025-09-24 12:14:29.831] Verifying certificate... [2025-09-24 12:14:30.086] Verified OK [2025-09-24 12:14:30.102] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:14:31.749] Verified OK [2025-09-24 12:14:31.749] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:14:32.277] Verified OK [2025-09-24 12:14:32.293] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:14:34.756] fs.protected_hardlinks = 1 [2025-09-24 12:14:34.756] fs.protected_symlinks = 1 [2025-09-24 12:14:34.772] kernel.modules_disabled = 1 [2025-09-24 12:14:34.979] [2025-09-24 12:14:34.979] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:14:36.433] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:14:44.214] SBL1:1210.0.1.0 [2025-09-24 12:14:44.262] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:14:45.845] SBL2:1210.0.1.0 [2025-09-24 12:14:45.878] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:14:45.973] j-A [2025-09-24 12:14:53.328] The R5 Autosar Classic is running [2025-09-24 12:14:53.351] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:14:53.351] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:14:53.959] INIT: version 2.96 booting [2025-09-24 12:14:54.071] INIT: Entering runlevel: 5 [2025-09-24 12:14:54.230] mtd24 attached [2025-09-24 12:14:54.230] mtd28 attached [2025-09-24 12:14:54.262] mtd32 attached [2025-09-24 12:14:54.294] RTNETLINK answers: File exists [2025-09-24 12:14:54.362] ubi0:textures is mounted. [2025-09-24 12:14:54.362] ubi1:animations is mounted. [2025-09-24 12:14:54.362] ubi2:dml_code is mounted. [2025-09-24 12:14:54.362] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:14:54.362] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:14:54.362] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:14:54.362] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:14:54.362] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:14:54.362] data.LB_FadeInType0=100 [2025-09-24 12:14:54.362] data.CHLH_FadeInType0=0 [2025-09-24 12:14:54.362] data.WU_FadeInDelay=0 [2025-09-24 12:14:54.362] max_time_out=0 [2025-09-24 12:14:54.362] No splash screen [2025-09-24 12:14:54.362] stop dss Done [2025-09-24 12:14:54.434] /dev/mem opened. [2025-09-24 12:14:54.434] Memory mapped at address 0xffff7fd3e000. [2025-09-24 12:14:54.434] Read at address 0x00600018 (0xffff7fd3e018): 0x00000000 [2025-09-24 12:14:54.434] Write at address 0x00600018 (0xffff7fd3e018): 0x00400040, readback 0x00400040 [2025-09-24 12:14:54.434] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:14:54.450] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:14:54.545] Loaded PowerVR consumer services. [2025-09-24 12:14:54.641] 512+0 records in [2025-09-24 12:14:54.641] 512+0 records out [2025-09-24 12:14:54.674] Starting syslogd/klogd: done [2025-09-24 12:14:54.706] Waiting data available... [2025-09-24 12:14:54.706] DML Start [2025-09-24 12:14:54.881] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:14:55.073] DML res1: 0 [2025-09-24 12:14:55.595] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:14:55.595] Read Success [2025-09-24 12:14:55.595] Verifying certificate... [2025-09-24 12:14:55.836] Verified OK [2025-09-24 12:14:55.852] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:14:57.555] Verified OK [2025-09-24 12:14:57.555] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:14:58.190] Verified OK [2025-09-24 12:14:58.190] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:15:00.813] fs.protected_hardlinks = 1 [2025-09-24 12:15:00.842] fs.protected_symlinks = 1 [2025-09-24 12:15:00.842] kernel.modules_disabled = 1 [2025-09-24 12:15:01.034] [2025-09-24 12:15:01.034] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:15:02.199] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:15:09.976] SBL1:1210.0.1.0 [2025-09-24 12:15:10.024] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:15:11.591] SBL2:1210.0.1.0 [2025-09-24 12:15:11.623] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:15:11.735] j-A [2025-09-24 12:15:19.090] The R5 Autosar Classic is running [2025-09-24 12:15:19.090] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:15:19.111] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:15:19.718] INIT: version 2.96 booting [2025-09-24 12:15:19.830] INIT: Entering runlevel: 5 [2025-09-24 12:15:19.990] mtd28 attached [2025-09-24 12:15:19.990] mtd32 attached [2025-09-24 12:15:20.006] mtd24 attached [2025-09-24 12:15:20.038] ubi0:animations is mounted. [2025-09-24 12:15:20.054] RTNETLINK answers: File exists [2025-09-24 12:15:20.111] ubi1:dml_code is mounted. [2025-09-24 12:15:20.111] ubi2:textures is mounted. [2025-09-24 12:15:20.111] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:15:20.111] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:15:20.111] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:15:20.111] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:15:20.111] data.LB_FadeInType0=100 [2025-09-24 12:15:20.111] data.CHLH_FadeInType0=0 [2025-09-24 12:15:20.111] data.WU_FadeInDelay=0 [2025-09-24 12:15:20.111] max_time_out=0 [2025-09-24 12:15:20.111] No splash screen [2025-09-24 12:15:20.111] stop dss Done [2025-09-24 12:15:20.111] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:15:20.208] /dev/mem opened. [2025-09-24 12:15:20.208] Memory mapped at address 0xffffa1026000. [2025-09-24 12:15:20.208] Read at address 0x00600018 (0xffffa1026018): 0x00000000 [2025-09-24 12:15:20.208] Write at address 0x00600018 (0xffffa1026018): 0x00400040, readback 0x00400040 [2025-09-24 12:15:20.208] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:15:20.208] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:15:20.351] Loaded PowerVR consumer services. [2025-09-24 12:15:20.399] 512+0 records in [2025-09-24 12:15:20.399] 512+0 records out [2025-09-24 12:15:20.431] Waiting data available... [2025-09-24 12:15:20.447] Starting syslogd/klogd: done [2025-09-24 12:15:20.463] DML Start [2025-09-24 12:15:20.672] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:15:20.894] DML res1: 0 [2025-09-24 12:15:21.301] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:15:21.301] Read Success [2025-09-24 12:15:21.301] Verifying certificate... [2025-09-24 12:15:21.540] Verified OK [2025-09-24 12:15:21.556] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:15:23.274] Verified OK [2025-09-24 12:15:23.274] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:15:23.881] Verified OK [2025-09-24 12:15:23.881] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:15:26.568] fs.protected_hardlinks = 1 [2025-09-24 12:15:26.599] fs.protected_symlinks = 1 [2025-09-24 12:15:26.599] kernel.modules_disabled = 1 [2025-09-24 12:15:26.774] [2025-09-24 12:15:26.774] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:15:27.982] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:15:35.710] SBL1:1210.0.1.0 [2025-09-24 12:15:35.757] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:15:37.324] SBL2:1210.0.1.0 [2025-09-24 12:15:37.356] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:15:37.468] j-A [2025-09-24 12:15:44.842] The R5 Autosar Classic is running [2025-09-24 12:15:44.842] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:15:44.842] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:15:45.450] INIT: version 2.96 booting [2025-09-24 12:15:45.561] INIT: Entering runlevel: 5 [2025-09-24 12:15:45.721] mtd28 attached [2025-09-24 12:15:45.721] mtd24 attached [2025-09-24 12:15:45.737] mtd32 attached [2025-09-24 12:15:45.785] RTNETLINK answers: File exists [2025-09-24 12:15:45.851] ubi0:animations is mounted. [2025-09-24 12:15:45.851] ubi1:textures is mounted. [2025-09-24 12:15:45.851] ubi2:dml_code is mounted. [2025-09-24 12:15:45.851] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:15:45.851] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:15:45.851] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:15:45.851] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:15:45.851] data.LB_FadeInType0=100 [2025-09-24 12:15:45.851] data.CHLH_FadeInType0=0 [2025-09-24 12:15:45.851] data.WU_FadeInDelay=0 [2025-09-24 12:15:45.851] max_time_out=0 [2025-09-24 12:15:45.851] No splash screen [2025-09-24 12:15:45.851] stop dss Done [2025-09-24 12:15:45.851] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:15:45.918] /dev/mem opened. [2025-09-24 12:15:45.918] Memory mapped at address 0xffff818e7000. [2025-09-24 12:15:45.918] Read at address 0x00600018 (0xffff818e7018): 0x00000000 [2025-09-24 12:15:45.918] Write at address 0x00600018 (0xffff818e7018): 0x00400040, readback 0x00400040 [2025-09-24 12:15:45.918] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:15:45.935] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:15:46.111] Loaded PowerVR consumer services. [2025-09-24 12:15:46.127] 512+0 records in [2025-09-24 12:15:46.127] 512+0 records out [2025-09-24 12:15:46.158] Starting syslogd/klogd: done [2025-09-24 12:15:46.190] Waiting data available... [2025-09-24 12:15:46.190] DML Start [2025-09-24 12:15:46.367] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:15:46.558] DML res1: 0 [2025-09-24 12:15:47.083] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:15:47.083] Read Success [2025-09-24 12:15:47.083] Verifying certificate... [2025-09-24 12:15:47.339] Verified OK [2025-09-24 12:15:47.371] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:15:48.991] Verified OK [2025-09-24 12:15:48.991] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:15:49.644] Verified OK [2025-09-24 12:15:49.644] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:15:52.203] fs.protected_hardlinks = 1 [2025-09-24 12:15:52.203] fs.protected_symlinks = 1 [2025-09-24 12:15:52.219] kernel.modules_disabled = 1 [2025-09-24 12:15:52.395] [2025-09-24 12:15:52.395] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:15:53.689] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:16:01.447] SBL1:1210.0.1.0 [2025-09-24 12:16:01.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:16:03.062] SBL2:1210.0.1.0 [2025-09-24 12:16:03.094] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:16:03.206] j-A [2025-09-24 12:16:10.544] The R5 Autosar Classic is running [2025-09-24 12:16:10.575] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:16:10.575] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:16:11.183] INIT: version 2.96 booting [2025-09-24 12:16:11.294] INIT: Entering runlevel: 5 [2025-09-24 12:16:11.455] mtd24 attached [2025-09-24 12:16:11.455] mtd32 attached [2025-09-24 12:16:11.471] mtd28 attached [2025-09-24 12:16:11.518] RTNETLINK answers: File exists [2025-09-24 12:16:11.562] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:16:11.562] ubi2:animations is mounted. [2025-09-24 12:16:11.562] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:16:11.562] ubi1:dml_code is mounted. [2025-09-24 12:16:11.562] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:16:11.562] ubi0:textures is mounted. [2025-09-24 12:16:11.562] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:16:11.562] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:16:11.587] data.LB_FadeInType0=100 [2025-09-24 12:16:11.587] data.CHLH_FadeInType0=0 [2025-09-24 12:16:11.587] data.WU_FadeInDelay=0 [2025-09-24 12:16:11.587] max_time_out=0 [2025-09-24 12:16:11.587] No splash screen [2025-09-24 12:16:11.587] stop dss Done [2025-09-24 12:16:11.667] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:16:11.667] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:16:11.667] /dev/mem opened. [2025-09-24 12:16:11.667] Memory mapped at address 0xffff89dfd000. [2025-09-24 12:16:11.667] Read at address 0x00600018 (0xffff89dfd018): 0x00000000 [2025-09-24 12:16:11.667] Write at address 0x00600018 (0xffff89dfd018): 0x00400040, readback 0x00400040 [2025-09-24 12:16:11.794] Loaded PowerVR consumer services. [2025-09-24 12:16:11.917] 512+0 records in [2025-09-24 12:16:11.917] 512+0 records out [2025-09-24 12:16:11.917] Waiting data available... [2025-09-24 12:16:11.949] Starting syslogd/klogd: done [2025-09-24 12:16:11.981] DML Start [2025-09-24 12:16:12.125] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:16:12.317] DML res1: 0 [2025-09-24 12:16:12.823] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:16:12.823] Read Success [2025-09-24 12:16:12.823] Verifying certificate... [2025-09-24 12:16:13.048] Verified OK [2025-09-24 12:16:13.064] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:16:14.624] Verified OK [2025-09-24 12:16:14.624] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:16:15.286] Verified OK [2025-09-24 12:16:15.286] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:16:18.021] fs.protected_hardlinks = 1 [2025-09-24 12:16:18.037] fs.protected_symlinks = 1 [2025-09-24 12:16:18.037] kernel.modules_disabled = 1 [2025-09-24 12:16:18.228] [2025-09-24 12:16:18.228] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:16:19.486] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:16:27.186] SBL1:1210.0.1.0 [2025-09-24 12:16:27.218] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:16:28.801] SBL2:1210.0.1.0 [2025-09-24 12:16:28.833] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:16:28.944] j-A [2025-09-24 12:16:36.282] The R5 Autosar Classic is running [2025-09-24 12:16:36.313] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:16:36.313] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:16:36.921] INIT: version 2.96 booting [2025-09-24 12:16:37.033] INIT: Entering runlevel: 5 [2025-09-24 12:16:37.192] mtd32 attached [2025-09-24 12:16:37.192] mtd24 attached [2025-09-24 12:16:37.208] mtd28 attached [2025-09-24 12:16:37.256] RTNETLINK answers: File exists [2025-09-24 12:16:37.256] ubi0:dml_code is mounted. [2025-09-24 12:16:37.321] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:16:37.321] ubi2:animations is mounted. [2025-09-24 12:16:37.321] ubi1:textures is mounted. [2025-09-24 12:16:37.321] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:16:37.321] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:16:37.321] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:16:37.321] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:16:37.321] data.LB_FadeInType0=100 [2025-09-24 12:16:37.321] data.CHLH_FadeInType0=0 [2025-09-24 12:16:37.321] data.WU_FadeInDelay=0 [2025-09-24 12:16:37.321] max_time_out=0 [2025-09-24 12:16:37.321] No splash screen [2025-09-24 12:16:37.321] stop dss Done [2025-09-24 12:16:37.407] /dev/mem opened. [2025-09-24 12:16:37.407] Memory mapped at address 0xffffa518d000. [2025-09-24 12:16:37.407] Read at address 0x00600018 (0xffffa518d018): 0x00000000 [2025-09-24 12:16:37.407] Write at address 0x00600018 (0xffffa518d018): 0x00400040, readback 0x00400040 [2025-09-24 12:16:37.407] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:16:37.407] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:16:37.583] Loaded PowerVR consumer services. [2025-09-24 12:16:37.614] 512+0 records in [2025-09-24 12:16:37.614] 512+0 records out [2025-09-24 12:16:37.678] Starting syslogd/klogd: done [2025-09-24 12:16:37.694] Waiting data available... [2025-09-24 12:16:37.694] DML Start [2025-09-24 12:16:37.887] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:16:38.142] DML res1: 0 [2025-09-24 12:16:38.536] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:16:38.536] Read Success [2025-09-24 12:16:38.536] Verifying certificate... [2025-09-24 12:16:38.775] Verified OK [2025-09-24 12:16:38.791] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:16:40.454] Verified OK [2025-09-24 12:16:40.454] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:16:41.071] Verified OK [2025-09-24 12:16:41.071] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:16:43.854] fs.protected_hardlinks = 1 [2025-09-24 12:16:43.854] fs.protected_symlinks = 1 [2025-09-24 12:16:43.870] kernel.modules_disabled = 1 [2025-09-24 12:16:44.062] [2025-09-24 12:16:44.062] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:16:45.204] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:16:52.914] SBL1:1210.0.1.0 [2025-09-24 12:16:52.962] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:16:54.529] SBL2:1210.0.1.0 [2025-09-24 12:16:54.561] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:16:54.674] j-A [2025-09-24 12:17:02.047] The R5 Autosar Classic is running [2025-09-24 12:17:02.047] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:17:02.047] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:17:02.655] INIT: version 2.96 booting [2025-09-24 12:17:02.767] INIT: Entering runlevel: 5 [2025-09-24 12:17:02.911] mtd28 attached [2025-09-24 12:17:02.927] mtd24 attached [2025-09-24 12:17:02.943] mtd32 attached [2025-09-24 12:17:02.975] ubi0:animations is mounted. [2025-09-24 12:17:02.991] RTNETLINK answers: File exists [2025-09-24 12:17:02.991] ubi1:textures is mounted. [2025-09-24 12:17:03.054] ubi2:dml_code is mounted. [2025-09-24 12:17:03.054] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:17:03.054] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:17:03.054] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:17:03.054] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:17:03.054] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:17:03.054] data.LB_FadeInType0=100 [2025-09-24 12:17:03.054] data.CHLH_FadeInType0=0 [2025-09-24 12:17:03.054] data.WU_FadeInDelay=0 [2025-09-24 12:17:03.054] max_time_out=0 [2025-09-24 12:17:03.054] No splash screen [2025-09-24 12:17:03.054] stop dss Done [2025-09-24 12:17:03.146] /dev/mem opened. [2025-09-24 12:17:03.146] Memory mapped at address 0xffff9c12a000. [2025-09-24 12:17:03.146] Read at address 0x00600018 (0xffff9c12a018): 0x00000000 [2025-09-24 12:17:03.146] Write at address 0x00600018 (0xffff9c12a018): 0x00400040, readback 0x00400040 [2025-09-24 12:17:03.146] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:17:03.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:17:03.227] Loaded PowerVR consumer services. [2025-09-24 12:17:03.339] 512+0 records in [2025-09-24 12:17:03.339] 512+0 records out [2025-09-24 12:17:03.386] Starting syslogd/klogd: Waiting data available... [2025-09-24 12:17:03.402] done [2025-09-24 12:17:03.402] DML Start [2025-09-24 12:17:03.611] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:17:03.834] DML res1: 0 [2025-09-24 12:17:04.291] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:17:04.291] Read Success [2025-09-24 12:17:04.291] Verifying certificate... [2025-09-24 12:17:04.515] Verified OK [2025-09-24 12:17:04.531] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:17:06.208] Verified OK [2025-09-24 12:17:06.208] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:17:06.797] Verified OK [2025-09-24 12:17:06.797] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:17:09.497] fs.protected_hardlinks = 1 [2025-09-24 12:17:09.497] fs.protected_symlinks = 1 [2025-09-24 12:17:09.497] kernel.modules_disabled = 1 [2025-09-24 12:17:09.689] [2025-09-24 12:17:09.689] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:17:10.919] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:17:18.639] SBL1:1210.0.1.0 [2025-09-24 12:17:18.671] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:17:20.254] SBL2:1210.0.1.0 [2025-09-24 12:17:20.286] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:17:20.397] j-A [2025-09-24 12:17:27.737] The R5 Autosar Classic is running [2025-09-24 12:17:27.768] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:17:27.768] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:17:28.376] INIT: version 2.96 booting [2025-09-24 12:17:28.487] INIT: Entering runlevel: 5 [2025-09-24 12:17:28.631] mtd24 attached [2025-09-24 12:17:28.647] mtd32 attached [2025-09-24 12:17:28.663] mtd28 attached [2025-09-24 12:17:28.766] RTNETLINK answers: File exists [2025-09-24 12:17:28.767] ubi0:textures is mounted. [2025-09-24 12:17:28.767] ubi1:dml_code is mounted. [2025-09-24 12:17:28.767] ubi2:animations is mounted. [2025-09-24 12:17:28.767] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:17:28.767] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:17:28.767] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:17:28.767] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:17:28.767] data.LB_FadeInType0=100 [2025-09-24 12:17:28.767] data.CHLH_FadeInType0=0 [2025-09-24 12:17:28.767] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:17:28.767] data.WU_FadeInDelay=0 [2025-09-24 12:17:28.767] max_time_out=0 [2025-09-24 12:17:28.767] No splash screen [2025-09-24 12:17:28.767] stop dss Done [2025-09-24 12:17:28.798] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:17:28.814] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:17:28.846] /dev/mem opened. [2025-09-24 12:17:28.846] Memory mapped at address 0xffff85d35000. [2025-09-24 12:17:28.846] Read at address 0x00600018 (0xffff85d35018): 0x00000000 [2025-09-24 12:17:28.846] Write at address 0x00600018 (0xffff85d35018): 0x00400040, readback 0x00400040 [2025-09-24 12:17:28.974] Loaded PowerVR consumer services. [2025-09-24 12:17:29.093] 512+0 records in [2025-09-24 12:17:29.093] 512+0 records out [2025-09-24 12:17:29.093] Waiting data available... [2025-09-24 12:17:29.125] Starting syslogd/klogd: done [2025-09-24 12:17:29.141] DML Start [2025-09-24 12:17:29.301] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:17:29.460] DML res1: 0 [2025-09-24 12:17:30.036] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:17:30.052] Read Success [2025-09-24 12:17:30.052] Verifying certificate... [2025-09-24 12:17:30.308] Verified OK [2025-09-24 12:17:30.324] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:17:31.998] Verified OK [2025-09-24 12:17:31.998] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:17:32.651] Verified OK [2025-09-24 12:17:32.651] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:17:35.321] fs.protected_hardlinks = 1 [2025-09-24 12:17:35.321] fs.protected_symlinks = 1 [2025-09-24 12:17:35.336] kernel.modules_disabled = 1 [2025-09-24 12:17:35.513] [2025-09-24 12:17:35.513] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:17:36.691] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:17:44.363] SBL1:1210.0.1.0 [2025-09-24 12:17:44.411] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:17:45.978] SBL2:1210.0.1.0 [2025-09-24 12:17:46.026] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:17:46.122] j-A [2025-09-24 12:17:53.478] The R5 Autosar Classic is running [2025-09-24 12:17:53.478] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:17:53.499] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:17:54.107] INIT: version 2.96 booting [2025-09-24 12:17:54.218] INIT: Entering runlevel: 5 [2025-09-24 12:17:54.361] mtd24 attached [2025-09-24 12:17:54.377] mtd28 attached [2025-09-24 12:17:54.393] mtd32 attached [2025-09-24 12:17:54.482] RTNETLINK answers: File exists [2025-09-24 12:17:54.482] ubi0:textures is mounted. [2025-09-24 12:17:54.482] ubi1:animations is mounted. [2025-09-24 12:17:54.482] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:17:54.482] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:17:54.482] ubi2:dml_code is mounted. [2025-09-24 12:17:54.482] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:17:54.482] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:17:54.482] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:17:54.505] data.LB_FadeInType0=100 [2025-09-24 12:17:54.505] data.CHLH_FadeInType0=0 [2025-09-24 12:17:54.505] data.WU_FadeInDelay=0 [2025-09-24 12:17:54.505] max_time_out=0 [2025-09-24 12:17:54.505] No splash screen [2025-09-24 12:17:54.505] stop dss Done [2025-09-24 12:17:54.537] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:17:54.573] /dev/mem opened. [2025-09-24 12:17:54.573] Memory mapped at address 0xffffb3bc3000. [2025-09-24 12:17:54.573] Read at address 0x00600018 (0xffffb3bc3018): 0x00000000 [2025-09-24 12:17:54.573] Write at address 0x00600018 (0xffffb3bc3018): 0x00400040, readback 0x00400040 [2025-09-24 12:17:54.573] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:17:54.716] Loaded PowerVR consumer services. [2025-09-24 12:17:54.813] 512+0 records in [2025-09-24 12:17:54.813] 512+0 records out [2025-09-24 12:17:54.829] Waiting data available... [2025-09-24 12:17:54.861] Starting syslogd/klogd: done [2025-09-24 12:17:54.893] DML Start [2025-09-24 12:17:55.052] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:17:55.276] DML res1: 0 [2025-09-24 12:17:55.724] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:17:55.745] Read Success [2025-09-24 12:17:55.745] Verifying certificate... [2025-09-24 12:17:55.985] Verified OK [2025-09-24 12:17:56.001] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:17:57.551] Verified OK [2025-09-24 12:17:57.551] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:17:58.174] Verified OK [2025-09-24 12:17:58.174] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:18:00.843] fs.protected_hardlinks = 1 [2025-09-24 12:18:00.859] fs.protected_symlinks = 1 [2025-09-24 12:18:00.859] kernel.modules_disabled = 1 [2025-09-24 12:18:01.051] [2025-09-24 12:18:01.051] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:18:02.395] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:18:10.096] SBL1:1210.0.1.0 [2025-09-24 12:18:10.144] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:18:11.711] SBL2:1210.0.1.0 [2025-09-24 12:18:11.743] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:18:11.854] j-A [2025-09-24 12:18:19.229] The R5 Autosar Classic is running [2025-09-24 12:18:19.229] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:18:19.229] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:18:19.837] INIT: version 2.96 booting [2025-09-24 12:18:19.948] INIT: Entering runlevel: 5 [2025-09-24 12:18:20.109] mtd28 attached [2025-09-24 12:18:20.109] mtd24 attached [2025-09-24 12:18:20.125] mtd32 attached [2025-09-24 12:18:20.157] ubi0:animations is mounted. [2025-09-24 12:18:20.235] RTNETLINK answers: File exists [2025-09-24 12:18:20.235] ubi1:textures is mounted. [2025-09-24 12:18:20.235] ubi2:dml_code is mounted. [2025-09-24 12:18:20.235] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:18:20.235] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:18:20.235] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:18:20.235] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:18:20.235] data.LB_FadeInType0=100 [2025-09-24 12:18:20.235] data.CHLH_FadeInType0=0 [2025-09-24 12:18:20.235] data.WU_FadeInDelay=0 [2025-09-24 12:18:20.235] max_time_out=0 [2025-09-24 12:18:20.235] No splash screen [2025-09-24 12:18:20.235] stop dss Done [2025-09-24 12:18:20.235] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:18:20.301] /dev/mem opened. [2025-09-24 12:18:20.301] Memory mapped at address 0xffffaff54000. [2025-09-24 12:18:20.301] Read at address 0x00600018 (0xffffaff54018): 0x00000000 [2025-09-24 12:18:20.301] Write at address 0x00600018 (0xffffaff54018): 0x00400040, readback 0x00400040 [2025-09-24 12:18:20.357] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:18:20.357] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:18:20.468] Loaded PowerVR consumer services. [2025-09-24 12:18:20.558] Waiting data available... [2025-09-24 12:18:20.558] 512+0 records in [2025-09-24 12:18:20.558] 512+0 records out [2025-09-24 12:18:20.589] Starting syslogd/klogd: done [2025-09-24 12:18:20.606] DML Start [2025-09-24 12:18:20.782] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:18:21.021] DML res1: 0 [2025-09-24 12:18:21.452] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:18:21.452] Read Success [2025-09-24 12:18:21.452] Verifying certificate... [2025-09-24 12:18:21.707] Verified OK [2025-09-24 12:18:21.723] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:18:23.418] Verified OK [2025-09-24 12:18:23.418] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:18:24.105] Verified OK [2025-09-24 12:18:24.105] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:18:26.663] fs.protected_hardlinks = 1 [2025-09-24 12:18:26.663] fs.protected_symlinks = 1 [2025-09-24 12:18:26.679] kernel.modules_disabled = 1 [2025-09-24 12:18:26.871] [2025-09-24 12:18:26.871] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:18:28.110] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:18:35.828] SBL1:1210.0.1.0 [2025-09-24 12:18:35.875] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:18:37.442] SBL2:1210.0.1.0 [2025-09-24 12:18:37.490] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:18:37.586] j-A [2025-09-24 12:18:44.942] The R5 Autosar Classic is running [2025-09-24 12:18:44.963] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:18:44.963] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:18:45.570] INIT: version 2.96 booting [2025-09-24 12:18:45.682] INIT: Entering runlevel: 5 [2025-09-24 12:18:45.842] mtd28 attached [2025-09-24 12:18:45.842] mtd24 attached [2025-09-24 12:18:45.874] mtd32 attached [2025-09-24 12:18:45.906] RTNETLINK answers: File exists [2025-09-24 12:18:45.906] ubi0:animations is mounted. [2025-09-24 12:18:45.969] ubi1:textures is mounted. [2025-09-24 12:18:45.969] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:18:45.969] ubi2:dml_code is mounted. [2025-09-24 12:18:45.969] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:18:45.969] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:18:45.969] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:18:45.969] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:18:45.969] data.LB_FadeInType0=100 [2025-09-24 12:18:45.969] data.CHLH_FadeInType0=0 [2025-09-24 12:18:45.969] data.WU_FadeInDelay=0 [2025-09-24 12:18:45.969] max_time_out=0 [2025-09-24 12:18:45.969] No splash screen [2025-09-24 12:18:45.969] stop dss Done [2025-09-24 12:18:46.049] /dev/mem opened. [2025-09-24 12:18:46.049] Memory mapped at address 0xffffad5b7000. [2025-09-24 12:18:46.049] Read at address 0x00600018 (0xffffad5b7018): 0x00000000 [2025-09-24 12:18:46.049] Write at address 0x00600018 (0xffffad5b7018): 0x00400040, readback 0x00400040 [2025-09-24 12:18:46.065] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:18:46.065] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:18:46.241] Loaded PowerVR consumer services. [2025-09-24 12:18:46.273] 512+0 records in [2025-09-24 12:18:46.273] 512+0 records out [2025-09-24 12:18:46.321] Waiting data available... [2025-09-24 12:18:46.337] Starting syslogd/klogd: done [2025-09-24 12:18:46.353] DML Start [2025-09-24 12:18:46.497] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:18:46.720] DML res1: 0 [2025-09-24 12:18:47.227] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:18:47.227] Read Success [2025-09-24 12:18:47.227] Verifying certificate... [2025-09-24 12:18:47.499] Verified OK [2025-09-24 12:18:47.515] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:18:49.135] Verified OK [2025-09-24 12:18:49.135] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:18:49.791] Verified OK [2025-09-24 12:18:49.807] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:18:52.397] fs.protected_hardlinks = 1 [2025-09-24 12:18:52.397] fs.protected_symlinks = 1 [2025-09-24 12:18:52.413] kernel.modules_disabled = 1 [2025-09-24 12:18:52.604] [2025-09-24 12:18:52.604] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:18:53.836] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:19:01.577] SBL1:1210.0.1.0 [2025-09-24 12:19:01.608] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:19:03.192] SBL2:1210.0.1.0 [2025-09-24 12:19:03.223] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:19:03.336] j-A [2025-09-24 12:19:10.676] The R5 Autosar Classic is running [2025-09-24 12:19:10.707] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:19:10.707] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:19:11.314] INIT: version 2.96 booting [2025-09-24 12:19:11.425] INIT: Entering runlevel: 5 [2025-09-24 12:19:11.586] mtd32 attached [2025-09-24 12:19:11.586] mtd28 attached [2025-09-24 12:19:11.602] mtd24 attached [2025-09-24 12:19:11.650] RTNETLINK answers: File exists [2025-09-24 12:19:11.715] ubi1:animations is mounted. [2025-09-24 12:19:11.715] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:19:11.715] ubi0:dml_code is mounted. [2025-09-24 12:19:11.715] ubi2:textures is mounted. [2025-09-24 12:19:11.715] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:19:11.715] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:19:11.715] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:19:11.715] data.LB_FadeInType0=100 [2025-09-24 12:19:11.715] data.CHLH_FadeInType0=0 [2025-09-24 12:19:11.715] data.WU_FadeInDelay=0 [2025-09-24 12:19:11.715] max_time_out=0 [2025-09-24 12:19:11.715] No splash screen [2025-09-24 12:19:11.715] stop dss Done [2025-09-24 12:19:11.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:19:11.747] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:19:11.763] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:19:11.803] /dev/mem opened. [2025-09-24 12:19:11.803] Memory mapped at address 0xffff9ceae000. [2025-09-24 12:19:11.803] Read at address 0x00600018 (0xffff9ceae018): 0x00000000 [2025-09-24 12:19:11.803] Write at address 0x00600018 (0xffff9ceae018): 0x00400040, readback 0x00400040 [2025-09-24 12:19:11.964] Loaded PowerVR consumer services. [2025-09-24 12:19:11.996] 512+0 records in [2025-09-24 12:19:12.012] 512+0 records out [2025-09-24 12:19:12.028] Waiting data available... [2025-09-24 12:19:12.060] Starting syslogd/klogd: done [2025-09-24 12:19:12.076] DML Start [2025-09-24 12:19:12.251] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:19:12.475] DML res1: 0 [2025-09-24 12:19:12.899] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:19:12.899] Read Success [2025-09-24 12:19:12.899] Verifying certificate... [2025-09-24 12:19:13.155] Verified OK [2025-09-24 12:19:13.171] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:19:14.718] Verified OK [2025-09-24 12:19:14.718] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:19:15.379] Verified OK [2025-09-24 12:19:15.379] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:19:18.081] fs.protected_hardlinks = 1 [2025-09-24 12:19:18.081] fs.protected_symlinks = 1 [2025-09-24 12:19:18.097] kernel.modules_disabled = 1 [2025-09-24 12:19:18.272] [2025-09-24 12:19:18.272] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:19:19.598] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:19:27.289] SBL1:1210.0.1.0 [2025-09-24 12:19:27.337] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:19:28.904] SBL2:1210.0.1.0 [2025-09-24 12:19:28.936] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:19:29.048] j-A [2025-09-24 12:19:36.403] The R5 Autosar Classic is running [2025-09-24 12:19:36.403] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:19:36.424] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:19:37.031] INIT: version 2.96 booting [2025-09-24 12:19:37.128] INIT: Entering runlevel: 5 [2025-09-24 12:19:37.287] mtd32 attached [2025-09-24 12:19:37.303] mtd28 attached [2025-09-24 12:19:37.303] mtd24 attached [2025-09-24 12:19:37.335] ubi0:dml_code is mounted. [2025-09-24 12:19:37.351] RTNETLINK answers: File exists [2025-09-24 12:19:37.409] ubi1:animations is mounted. [2025-09-24 12:19:37.409] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:19:37.409] ubi2:textures is mounted. [2025-09-24 12:19:37.409] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:19:37.409] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:19:37.409] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:19:37.409] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:19:37.409] data.LB_FadeInType0=100 [2025-09-24 12:19:37.409] data.CHLH_FadeInType0=0 [2025-09-24 12:19:37.409] data.WU_FadeInDelay=0 [2025-09-24 12:19:37.409] max_time_out=0 [2025-09-24 12:19:37.409] No splash screen [2025-09-24 12:19:37.409] stop dss Done [2025-09-24 12:19:37.441] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:19:37.441] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:19:37.491] /dev/mem opened. [2025-09-24 12:19:37.491] Memory mapped at address 0xffffacb38000. [2025-09-24 12:19:37.491] Read at address 0x00600018 (0xffffacb38018): 0x00000000 [2025-09-24 12:19:37.491] Write at address 0x00600018 (0xffffacb38018): 0x00400040, readback 0x00400040 [2025-09-24 12:19:37.620] Loaded PowerVR consumer services. [2025-09-24 12:19:37.731] Waiting data available... [2025-09-24 12:19:37.731] 512+0 records in [2025-09-24 12:19:37.747] 512+0 records out [2025-09-24 12:19:37.779] Starting syslogd/klogd: done [2025-09-24 12:19:37.795] DML Start [2025-09-24 12:19:37.987] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:19:38.211] DML res1: 0 [2025-09-24 12:19:38.633] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:19:38.633] Read Success [2025-09-24 12:19:38.633] Verifying certificate... [2025-09-24 12:19:38.873] Verified OK [2025-09-24 12:19:38.889] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:19:40.542] Verified OK [2025-09-24 12:19:40.542] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:19:41.143] Verified OK [2025-09-24 12:19:41.143] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:19:43.685] fs.protected_hardlinks = 1 [2025-09-24 12:19:43.716] fs.protected_symlinks = 1 [2025-09-24 12:19:43.716] kernel.modules_disabled = 1 [2025-09-24 12:19:43.907] [2025-09-24 12:19:43.907] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:19:45.299] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:19:53.034] SBL1:1210.0.1.0 [2025-09-24 12:19:53.082] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:19:54.649] SBL2:1210.0.1.0 [2025-09-24 12:19:54.681] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:19:54.792] j-A [2025-09-24 12:20:02.164] The R5 Autosar Classic is running [2025-09-24 12:20:02.164] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:20:02.164] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:20:02.771] INIT: version 2.96 booting [2025-09-24 12:20:02.884] INIT: Entering runlevel: 5 [2025-09-24 12:20:03.044] mtd28 attached [2025-09-24 12:20:03.044] mtd24 attached [2025-09-24 12:20:03.060] mtd32 attached [2025-09-24 12:20:03.092] ubi0:animations is mounted. [2025-09-24 12:20:03.108] RTNETLINK answers: File exists [2025-09-24 12:20:03.168] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:20:03.168] ubi1:textures is mounted. [2025-09-24 12:20:03.168] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:20:03.168] ubi2:dml_code is mounted. [2025-09-24 12:20:03.168] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:20:03.168] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:20:03.168] data.LB_FadeInType0=100 [2025-09-24 12:20:03.168] data.CHLH_FadeInType0=0 [2025-09-24 12:20:03.168] data.WU_FadeInDelay=0 [2025-09-24 12:20:03.168] max_time_out=0 [2025-09-24 12:20:03.168] No splash screen [2025-09-24 12:20:03.168] stop dss Done [2025-09-24 12:20:03.168] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:20:03.250] /dev/mem opened. [2025-09-24 12:20:03.250] Memory mapped at address 0xffff9ff24000. [2025-09-24 12:20:03.250] Read at address 0x00600018 (0xffff9ff24018): 0x00000000 [2025-09-24 12:20:03.250] Write at address 0x00600018 (0xffff9ff24018): 0x00400040, readback 0x00400040 [2025-09-24 12:20:03.267] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:20:03.295] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:20:03.422] Loaded PowerVR consumer services. [2025-09-24 12:20:03.471] 512+0 records in [2025-09-24 12:20:03.487] 512+0 records out [2025-09-24 12:20:03.503] Waiting data available... [2025-09-24 12:20:03.535] Starting syslogd/klogd: done [2025-09-24 12:20:03.551] DML Start [2025-09-24 12:20:03.710] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:20:03.934] DML res1: 0 [2025-09-24 12:20:04.390] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:20:04.390] Read Success [2025-09-24 12:20:04.390] Verifying certificate... [2025-09-24 12:20:04.613] Verified OK [2025-09-24 12:20:04.629] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:20:06.133] Verified OK [2025-09-24 12:20:06.133] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:20:06.802] Verified OK [2025-09-24 12:20:06.802] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:20:09.553] fs.protected_hardlinks = 1 [2025-09-24 12:20:09.568] fs.protected_symlinks = 1 [2025-09-24 12:20:09.568] kernel.modules_disabled = 1 [2025-09-24 12:20:09.760] [2025-09-24 12:20:09.760] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:20:11.039] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:20:18.747] SBL1:1210.0.1.0 [2025-09-24 12:20:18.795] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:20:20.362] SBL2:1210.0.1.0 [2025-09-24 12:20:20.410] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:20:20.506] j-A [2025-09-24 12:20:27.860] The R5 Autosar Classic is running [2025-09-24 12:20:27.883] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:20:27.883] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:20:28.491] INIT: version 2.96 booting [2025-09-24 12:20:28.603] INIT: Entering runlevel: 5 [2025-09-24 12:20:28.762] mtd28 attached [2025-09-24 12:20:28.762] mtd32 attached [2025-09-24 12:20:28.779] mtd24 attached [2025-09-24 12:20:28.827] ubi0:animations is mounted. [2025-09-24 12:20:28.827] RTNETLINK answers: File exists [2025-09-24 12:20:28.895] ubi2:textures is mounted. [2025-09-24 12:20:28.895] ubi1:dml_code is mounted. [2025-09-24 12:20:28.895] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:20:28.895] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:20:28.895] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:20:28.895] data.LB_FadeInType0=100 [2025-09-24 12:20:28.895] data.CHLH_FadeInType0=0 [2025-09-24 12:20:28.895] data.WU_FadeInDelay=0 [2025-09-24 12:20:28.895] max_time_out=0 [2025-09-24 12:20:28.895] No splash screen [2025-09-24 12:20:28.895] stop dss Done [2025-09-24 12:20:28.895] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:20:28.895] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:20:28.968] /dev/mem opened. [2025-09-24 12:20:28.968] Memory mapped at address 0xffff8f6ef000. [2025-09-24 12:20:28.968] Read at address 0x00600018 (0xffff8f6ef018): 0x00000000 [2025-09-24 12:20:28.968] Write at address 0x00600018 (0xffff8f6ef018): 0x00400040, readback 0x00400040 [2025-09-24 12:20:28.968] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:20:28.984] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:20:29.063] Loaded PowerVR consumer services. [2025-09-24 12:20:29.192] 512+0 records in [2025-09-24 12:20:29.192] 512+0 records out [2025-09-24 12:20:29.192] Waiting data available... [2025-09-24 12:20:29.255] Starting syslogd/klogd: done [2025-09-24 12:20:29.271] DML Start [2025-09-24 12:20:29.463] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:20:29.671] DML res1: 0 [2025-09-24 12:20:30.146] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:20:30.146] Read Success [2025-09-24 12:20:30.146] Verifying certificate... [2025-09-24 12:20:30.385] Verified OK [2025-09-24 12:20:30.401] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:20:32.046] Verified OK [2025-09-24 12:20:32.046] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:20:32.685] Verified OK [2025-09-24 12:20:32.685] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:20:35.291] fs.protected_hardlinks = 1 [2025-09-24 12:20:35.307] fs.protected_symlinks = 1 [2025-09-24 12:20:35.323] kernel.modules_disabled = 1 [2025-09-24 12:20:35.516] [2025-09-24 12:20:35.516] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:20:36.775] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:20:44.489] SBL1:1210.0.1.0 [2025-09-24 12:20:44.521] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:20:46.104] SBL2:1210.0.1.0 [2025-09-24 12:20:46.136] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:20:46.247] j-A [2025-09-24 12:20:53.586] The R5 Autosar Classic is running [2025-09-24 12:20:53.612] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:20:53.612] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:20:54.219] INIT: version 2.96 booting [2025-09-24 12:20:54.331] INIT: Entering runlevel: 5 [2025-09-24 12:20:54.491] mtd32 attached [2025-09-24 12:20:54.507] mtd28 attached [2025-09-24 12:20:54.507] mtd24 attached [2025-09-24 12:20:54.555] ubi0:dml_code is mounted. [2025-09-24 12:20:54.555] RTNETLINK answers: File exists [2025-09-24 12:20:54.618] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:20:54.618] ubi1:animations is mounted. [2025-09-24 12:20:54.618] ubi2:textures is mounted. [2025-09-24 12:20:54.618] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:20:54.618] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:20:54.618] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:20:54.618] data.LB_FadeInType0=100 [2025-09-24 12:20:54.618] data.CHLH_FadeInType0=0 [2025-09-24 12:20:54.618] data.WU_FadeInDelay=0 [2025-09-24 12:20:54.618] max_time_out=0 [2025-09-24 12:20:54.618] No splash screen [2025-09-24 12:20:54.618] stop dss Done [2025-09-24 12:20:54.618] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:20:54.691] /dev/mem opened. [2025-09-24 12:20:54.691] Memory mapped at address 0xffff89d81000. [2025-09-24 12:20:54.691] Read at address 0x00600018 (0xffff89d81018): 0x00000000 [2025-09-24 12:20:54.691] Write at address 0x00600018 (0xffff89d81018): 0x00400040, readback 0x00400040 [2025-09-24 12:20:54.691] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:20:54.707] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:20:54.818] Loaded PowerVR consumer services. [2025-09-24 12:20:54.954] 512+0 records in [2025-09-24 12:20:54.954] 512+0 records out [2025-09-24 12:20:54.954] Waiting data available... [2025-09-24 12:20:54.986] Starting syslogd/klogd: done [2025-09-24 12:20:55.001] DML Start [2025-09-24 12:20:55.177] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:20:55.417] DML res1: 0 [2025-09-24 12:20:55.828] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:20:55.828] Read Success [2025-09-24 12:20:55.828] Verifying certificate... [2025-09-24 12:20:56.100] Verified OK [2025-09-24 12:20:56.116] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:20:57.817] Verified OK [2025-09-24 12:20:57.817] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:20:58.409] Verified OK [2025-09-24 12:20:58.409] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:21:00.984] fs.protected_hardlinks = 1 [2025-09-24 12:21:01.000] fs.protected_symlinks = 1 [2025-09-24 12:21:01.000] kernel.modules_disabled = 1 [2025-09-24 12:21:01.191] [2025-09-24 12:21:01.191] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:21:02.539] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:21:10.211] SBL1:1210.0.1.0 [2025-09-24 12:21:10.243] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:21:11.825] SBL2:1210.0.1.0 [2025-09-24 12:21:11.857] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:21:11.970] j-A [2025-09-24 12:21:19.339] The R5 Autosar Classic is running [2025-09-24 12:21:19.339] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:21:19.339] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:21:19.946] INIT: version 2.96 booting [2025-09-24 12:21:20.058] INIT: Entering runlevel: 5 [2025-09-24 12:21:20.202] mtd24 attached [2025-09-24 12:21:20.218] mtd32 attached [2025-09-24 12:21:20.234] mtd28 attached [2025-09-24 12:21:20.250] ubi0:textures is mounted. [2025-09-24 12:21:20.282] ubi1:dml_code is mounted. [2025-09-24 12:21:20.282] RTNETLINK answers: File exists [2025-09-24 12:21:20.282] ubi2:animations is mounted. [2025-09-24 12:21:20.309] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:21:20.309] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:21:20.309] data.LB_FadeInType0=100 [2025-09-24 12:21:20.335] data.CHLH_FadeInType0=0 [2025-09-24 12:21:20.335] data.WU_FadeInDelay=0 [2025-09-24 12:21:20.335] max_time_out=0 [2025-09-24 12:21:20.335] No splash screen [2025-09-24 12:21:20.335] stop dss Done [2025-09-24 12:21:20.335] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:21:20.335] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:21:20.351] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:21:20.403] /dev/mem opened. [2025-09-24 12:21:20.403] Memory mapped at address 0xffff83c69000. [2025-09-24 12:21:20.403] Read at address 0x00600018 (0xffff83c69018): 0x00000000 [2025-09-24 12:21:20.403] Write at address 0x00600018 (0xffff83c69018): 0x00400040, readback 0x00400040 [2025-09-24 12:21:20.451] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:21:20.467] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:21:20.531] Loaded PowerVR consumer services. [2025-09-24 12:21:20.658] Waiting data available... [2025-09-24 12:21:20.658] 512+0 records in [2025-09-24 12:21:20.674] 512+0 records out [2025-09-24 12:21:20.690] Starting syslogd/klogd: done [2025-09-24 12:21:20.706] DML Start [2025-09-24 12:21:20.882] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:21:21.074] DML res1: 0 [2025-09-24 12:21:21.586] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:21:21.607] Read Success [2025-09-24 12:21:21.607] Verifying certificate... [2025-09-24 12:21:21.847] Verified OK [2025-09-24 12:21:21.863] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:21:23.589] Verified OK [2025-09-24 12:21:23.589] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:21:24.207] Verified OK [2025-09-24 12:21:24.207] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:21:26.701] fs.protected_hardlinks = 1 [2025-09-24 12:21:26.717] fs.protected_symlinks = 1 [2025-09-24 12:21:26.717] kernel.modules_disabled = 1 [2025-09-24 12:21:26.908] [2025-09-24 12:21:26.908] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:21:28.201] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:21:35.923] SBL1:1210.0.1.0 [2025-09-24 12:21:35.955] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:21:37.539] SBL2:1210.0.1.0 [2025-09-24 12:21:37.570] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:21:37.683] j-A [2025-09-24 12:21:45.053] The R5 Autosar Classic is running [2025-09-24 12:21:45.053] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:21:45.053] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:21:45.660] INIT: version 2.96 booting [2025-09-24 12:21:45.772] INIT: Entering runlevel: 5 [2025-09-24 12:21:45.932] mtd28 attached [2025-09-24 12:21:45.932] mtd24 attached [2025-09-24 12:21:45.948] mtd32 attached [2025-09-24 12:21:46.053] ubi0:animations is mounted. [2025-09-24 12:21:46.053] ubi1:textures is mounted. [2025-09-24 12:21:46.053] RTNETLINK answers: File exists [2025-09-24 12:21:46.053] ubi2:dml_code is mounted. [2025-09-24 12:21:46.053] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:21:46.053] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:21:46.053] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:21:46.053] data.LB_FadeInType0=100 [2025-09-24 12:21:46.053] data.CHLH_FadeInType0=0 [2025-09-24 12:21:46.053] data.WU_FadeInDelay=0 [2025-09-24 12:21:46.053] max_time_out=0 [2025-09-24 12:21:46.053] No splash screen [2025-09-24 12:21:46.053] stop dss Done [2025-09-24 12:21:46.053] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:21:46.053] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:21:46.101] /dev/mem opened. [2025-09-24 12:21:46.101] Memory mapped at address 0xffffb9927000. [2025-09-24 12:21:46.137] Read at address 0x00600018 (0xffffb9927018): 0x00000000 [2025-09-24 12:21:46.137] Write at address 0x00600018 (0xffffb9927018): 0x00400040, readback 0x00400040 [2025-09-24 12:21:46.137] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:21:46.137] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:21:46.312] Loaded PowerVR consumer services. [2025-09-24 12:21:46.376] Waiting data available... [2025-09-24 12:21:46.376] 512+0 records in [2025-09-24 12:21:46.376] 512+0 records out [2025-09-24 12:21:46.408] Starting syslogd/klogd: done [2025-09-24 12:21:46.424] DML Start [2025-09-24 12:21:46.615] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:21:46.855] DML res1: 0 [2025-09-24 12:21:47.252] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:21:47.252] Read Success [2025-09-24 12:21:47.252] Verifying certificate... [2025-09-24 12:21:47.541] Verified OK [2025-09-24 12:21:47.557] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:21:49.135] Verified OK [2025-09-24 12:21:49.135] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:21:49.791] Verified OK [2025-09-24 12:21:49.791] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:21:52.349] fs.protected_hardlinks = 1 [2025-09-24 12:21:52.349] fs.protected_symlinks = 1 [2025-09-24 12:21:52.365] kernel.modules_disabled = 1 [2025-09-24 12:21:52.557] [2025-09-24 12:21:52.557] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:21:53.944] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:22:01.641] SBL1:1210.0.1.0 [2025-09-24 12:22:01.689] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:22:03.257] SBL2:1210.0.1.0 [2025-09-24 12:22:03.304] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:22:03.400] j-A [2025-09-24 12:22:10.755] The R5 Autosar Classic is running [2025-09-24 12:22:10.777] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:22:10.777] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:22:11.384] INIT: version 2.96 booting [2025-09-24 12:22:11.496] INIT: Entering runlevel: 5 [2025-09-24 12:22:11.656] mtd24 attached [2025-09-24 12:22:11.656] mtd28 attached [2025-09-24 12:22:11.672] mtd32 attached [2025-09-24 12:22:11.720] ubi0:textures is mounted. [2025-09-24 12:22:11.720] ubi1:animations is mounted. [2025-09-24 12:22:11.791] RTNETLINK answers: File exists [2025-09-24 12:22:11.791] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:22:11.791] ubi2:dml_code is mounted. [2025-09-24 12:22:11.791] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:22:11.791] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:22:11.791] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:22:11.791] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:22:11.791] data.LB_FadeInType0=100 [2025-09-24 12:22:11.791] data.CHLH_FadeInType0=0 [2025-09-24 12:22:11.791] data.WU_FadeInDelay=0 [2025-09-24 12:22:11.791] max_time_out=0 [2025-09-24 12:22:11.791] No splash screen [2025-09-24 12:22:11.791] stop dss Done [2025-09-24 12:22:11.823] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:22:11.823] /dev/mem opened. [2025-09-24 12:22:11.855] Memory mapped at address 0xffffb3cde000. [2025-09-24 12:22:11.855] Read at address 0x00600018 (0xffffb3cde018): 0x00000000 [2025-09-24 12:22:11.855] Write at address 0x00600018 (0xffffb3cde018): 0x00400040, readback 0x00400040 [2025-09-24 12:22:11.855] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:22:12.030] Loaded PowerVR consumer services. [2025-09-24 12:22:12.078] 512+0 records in [2025-09-24 12:22:12.078] 512+0 records out [2025-09-24 12:22:12.111] Starting syslogd/klogd: Waiting data available... [2025-09-24 12:22:12.127] done [2025-09-24 12:22:12.127] DML Start [2025-09-24 12:22:12.302] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:22:12.526] DML res1: 0 [2025-09-24 12:22:13.002] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:22:13.002] Read Success [2025-09-24 12:22:13.002] Verifying certificate... [2025-09-24 12:22:13.258] Verified OK [2025-09-24 12:22:13.274] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:22:14.964] Verified OK [2025-09-24 12:22:14.964] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:22:15.593] Verified OK [2025-09-24 12:22:15.593] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:22:18.280] fs.protected_hardlinks = 1 [2025-09-24 12:22:18.280] fs.protected_symlinks = 1 [2025-09-24 12:22:18.296] kernel.modules_disabled = 1 [2025-09-24 12:22:18.487] [2025-09-24 12:22:18.487] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:22:19.635] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:22:27.369] SBL1:1210.0.1.0 [2025-09-24 12:22:27.417] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:22:29.000] SBL2:1210.0.1.0 [2025-09-24 12:22:29.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:22:29.128] j-A [2025-09-24 12:22:36.483] The R5 Autosar Classic is running [2025-09-24 12:22:36.507] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:22:36.507] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:22:37.114] INIT: version 2.96 booting [2025-09-24 12:22:37.227] INIT: Entering runlevel: 5 [2025-09-24 12:22:37.386] mtd28 attached [2025-09-24 12:22:37.386] mtd24 attached [2025-09-24 12:22:37.402] mtd32 attached [2025-09-24 12:22:37.450] ubi0:animations is mounted. [2025-09-24 12:22:37.450] RTNETLINK answers: File exists [2025-09-24 12:22:37.480] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:22:37.480] ubi1:textures is mounted. [2025-09-24 12:22:37.480] ubi2:dml_code is mounted. [2025-09-24 12:22:37.480] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:22:37.480] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:22:37.480] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:22:37.512] data.LB_FadeInType0=100 [2025-09-24 12:22:37.512] data.CHLH_FadeInType0=0 [2025-09-24 12:22:37.512] data.WU_FadeInDelay=0 [2025-09-24 12:22:37.512] max_time_out=0 [2025-09-24 12:22:37.512] No splash screen [2025-09-24 12:22:37.512] stop dss Done [2025-09-24 12:22:37.512] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:22:37.544] /dev/mem opened. [2025-09-24 12:22:37.576] Memory mapped at address 0xffffabba9000. [2025-09-24 12:22:37.576] Read at address 0x00600018 (0xffffabba9018): 0x00000000 [2025-09-24 12:22:37.576] Write at address 0x00600018 (0xffffabba9018): 0x00400040, readback 0x00400040 [2025-09-24 12:22:37.576] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:22:37.592] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:22:37.688] Loaded PowerVR consumer services. [2025-09-24 12:22:37.816] 512+0 records in [2025-09-24 12:22:37.816] 512+0 records out [2025-09-24 12:22:37.832] Waiting data available... [2025-09-24 12:22:37.864] Starting syslogd/klogd: done [2025-09-24 12:22:37.880] DML Start [2025-09-24 12:22:38.071] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:22:38.311] DML res1: 0 [2025-09-24 12:22:38.732] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:22:38.732] Read Success [2025-09-24 12:22:38.732] Verifying certificate... [2025-09-24 12:22:38.956] Verified OK [2025-09-24 12:22:38.972] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:22:40.723] Verified OK [2025-09-24 12:22:40.723] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:22:41.345] Verified OK [2025-09-24 12:22:41.345] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:22:43.967] fs.protected_hardlinks = 1 [2025-09-24 12:22:43.967] fs.protected_symlinks = 1 [2025-09-24 12:22:43.983] kernel.modules_disabled = 1 [2025-09-24 12:22:44.191] [2025-09-24 12:22:44.191] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:22:45.386] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:22:53.119] SBL1:1210.0.1.0 [2025-09-24 12:22:53.167] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:22:54.734] SBL2:1210.0.1.0 [2025-09-24 12:22:54.765] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:22:54.877] j-A [2025-09-24 12:23:02.249] The R5 Autosar Classic is running [2025-09-24 12:23:02.249] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:23:02.249] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:23:02.857] INIT: version 2.96 booting [2025-09-24 12:23:02.968] INIT: Entering runlevel: 5 [2025-09-24 12:23:03.113] mtd24 attached [2025-09-24 12:23:03.129] mtd28 attached [2025-09-24 12:23:03.160] ubi0:textures is mounted. [2025-09-24 12:23:03.160] mtd32 attached [2025-09-24 12:23:03.193] ubi1:animations is mounted. [2025-09-24 12:23:03.193] RTNETLINK answers: File exists [2025-09-24 12:23:03.226] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:23:03.226] ubi2:dml_code is mounted. [2025-09-24 12:23:03.226] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:23:03.226] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:23:03.226] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:23:03.256] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:23:03.256] data.LB_FadeInType0=100 [2025-09-24 12:23:03.256] data.CHLH_FadeInType0=0 [2025-09-24 12:23:03.256] data.WU_FadeInDelay=0 [2025-09-24 12:23:03.256] max_time_out=0 [2025-09-24 12:23:03.256] No splash screen [2025-09-24 12:23:03.256] stop dss Done [2025-09-24 12:23:03.272] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:23:03.294] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:23:03.327] /dev/mem opened. [2025-09-24 12:23:03.327] Memory mapped at address 0xffffb3236000. [2025-09-24 12:23:03.327] Read at address 0x00600018 (0xffffb3236018): 0x00000000 [2025-09-24 12:23:03.327] Write at address 0x00600018 (0xffffb3236018): 0x00400040, readback 0x00400040 [2025-09-24 12:23:03.407] Loaded PowerVR consumer services. [2025-09-24 12:23:03.565] 512+0 records in [2025-09-24 12:23:03.565] 512+0 records out [2025-09-24 12:23:03.565] Waiting data available... [2025-09-24 12:23:03.596] Starting syslogd/klogd: done [2025-09-24 12:23:03.612] DML Start [2025-09-24 12:23:03.805] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:23:04.029] DML res1: 0 [2025-09-24 12:23:04.396] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:23:04.412] Read Success [2025-09-24 12:23:04.412] Verifying certificate... [2025-09-24 12:23:04.732] Verified OK [2025-09-24 12:23:04.748] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:23:06.422] Verified OK [2025-09-24 12:23:06.422] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:23:07.051] Verified OK [2025-09-24 12:23:07.051] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:23:09.625] fs.protected_hardlinks = 1 [2025-09-24 12:23:09.625] fs.protected_symlinks = 1 [2025-09-24 12:23:09.641] kernel.modules_disabled = 1 [2025-09-24 12:23:09.818] [2025-09-24 12:23:09.818] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:23:11.094] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:23:18.837] SBL1:1210.0.1.0 [2025-09-24 12:23:18.884] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:23:20.452] SBL2:1210.0.1.0 [2025-09-24 12:23:20.499] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:23:20.595] j-A [2025-09-24 12:23:27.951] The R5 Autosar Classic is running [2025-09-24 12:23:27.951] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:23:27.972] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:23:28.580] INIT: version 2.96 booting [2025-09-24 12:23:28.692] INIT: Entering runlevel: 5 [2025-09-24 12:23:28.836] mtd28 attached [2025-09-24 12:23:28.851] mtd32 attached [2025-09-24 12:23:28.867] mtd24 attached [2025-09-24 12:23:28.923] ubi1:dml_code is mounted. [2025-09-24 12:23:28.923] RTNETLINK answers: File exists [2025-09-24 12:23:28.923] ubi0:animations is mounted. [2025-09-24 12:23:28.923] ubi2:textures is mounted. [2025-09-24 12:23:28.923] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:23:28.966] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:23:28.966] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:23:28.966] data.LB_FadeInType0=100 [2025-09-24 12:23:28.966] data.CHLH_FadeInType0=0 [2025-09-24 12:23:28.966] data.WU_FadeInDelay=0 [2025-09-24 12:23:28.966] max_time_out=0 [2025-09-24 12:23:28.966] No splash screen [2025-09-24 12:23:28.966] stop dss Done [2025-09-24 12:23:28.966] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:23:28.966] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:23:29.022] /dev/mem opened. [2025-09-24 12:23:29.022] Memory mapped at address 0xffff811d6000. [2025-09-24 12:23:29.022] Read at address 0x00600018 (0xffff811d6018): 0x00000000 [2025-09-24 12:23:29.022] Write at address 0x00600018 (0xffff811d6018): 0x00400040, readback 0x00400040 [2025-09-24 12:23:29.039] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:23:29.054] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:23:29.214] Loaded PowerVR consumer services. [2025-09-24 12:23:29.319] Waiting data available... [2025-09-24 12:23:29.319] 512+0 records in [2025-09-24 12:23:29.319] 512+0 records out [2025-09-24 12:23:29.351] Starting syslogd/klogd: done [2025-09-24 12:23:29.383] DML Start [2025-09-24 12:23:29.576] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:23:29.800] DML res1: 0 [2025-09-24 12:23:30.183] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:23:30.183] Read Success [2025-09-24 12:23:30.199] Verifying certificate... [2025-09-24 12:23:30.455] Verified OK [2025-09-24 12:23:30.455] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:23:32.134] Verified OK [2025-09-24 12:23:32.134] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:23:32.780] Verified OK [2025-09-24 12:23:32.780] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:23:35.385] fs.protected_hardlinks = 1 [2025-09-24 12:23:35.385] fs.protected_symlinks = 1 [2025-09-24 12:23:35.401] kernel.modules_disabled = 1 [2025-09-24 12:23:35.578] [2025-09-24 12:23:35.578] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:23:36.878] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:23:44.571] SBL1:1210.0.1.0 [2025-09-24 12:23:44.603] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:23:46.186] SBL2:1210.0.1.0 [2025-09-24 12:23:46.218] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:23:46.314] j-A [2025-09-24 12:23:53.670] The R5 Autosar Classic is running [2025-09-24 12:23:53.690] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:23:53.690] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:23:54.298] INIT: version 2.96 booting [2025-09-24 12:23:54.410] INIT: Entering runlevel: 5 [2025-09-24 12:23:54.570] mtd24 attached [2025-09-24 12:23:54.570] mtd32 attached [2025-09-24 12:23:54.586] mtd28 attached [2025-09-24 12:23:54.634] ubi0:textures is mounted. [2025-09-24 12:23:54.650] RTNETLINK answers: File exists [2025-09-24 12:23:54.650] ubi1:dml_code is mounted. [2025-09-24 12:23:54.700] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:23:54.700] ubi2:animations is mounted. [2025-09-24 12:23:54.700] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:23:54.700] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:23:54.700] data.LB_FadeInType0=100 [2025-09-24 12:23:54.700] data.CHLH_FadeInType0=0 [2025-09-24 12:23:54.700] data.WU_FadeInDelay=0 [2025-09-24 12:23:54.700] max_time_out=0 [2025-09-24 12:23:54.700] No splash screen [2025-09-24 12:23:54.700] stop dss Done [2025-09-24 12:23:54.700] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:23:54.700] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:23:54.767] /dev/mem opened. [2025-09-24 12:23:54.767] Memory mapped at address 0xffffb124a000. [2025-09-24 12:23:54.767] Read at address 0x00600018 (0xffffb124a018): 0x00000000 [2025-09-24 12:23:54.767] Write at address 0x00600018 (0xffffb124a018): 0x00400040, readback 0x00400040 [2025-09-24 12:23:54.767] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:23:54.767] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:23:54.927] Loaded PowerVR consumer services. [2025-09-24 12:23:55.038] 512+0 records in [2025-09-24 12:23:55.038] 512+0 records out [2025-09-24 12:23:55.038] Waiting data available... [2025-09-24 12:23:55.071] Starting syslogd/klogd: done [2025-09-24 12:23:55.087] DML Start [2025-09-24 12:23:55.278] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:23:55.502] DML res1: 0 [2025-09-24 12:23:55.870] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:23:55.897] Read Success [2025-09-24 12:23:55.897] Verifying certificate... [2025-09-24 12:23:56.121] Verified OK [2025-09-24 12:23:56.137] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:23:57.763] Verified OK [2025-09-24 12:23:57.763] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:23:58.417] Verified OK [2025-09-24 12:23:58.417] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:24:01.151] fs.protected_hardlinks = 1 [2025-09-24 12:24:01.151] fs.protected_symlinks = 1 [2025-09-24 12:24:01.167] kernel.modules_disabled = 1 [2025-09-24 12:24:01.359] [2025-09-24 12:24:01.359] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:24:02.602] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:24:10.305] SBL1:1210.0.1.0 [2025-09-24 12:24:10.353] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:24:11.920] SBL2:1210.0.1.0 [2025-09-24 12:24:11.952] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:24:12.064] j-A [2025-09-24 12:24:19.438] The R5 Autosar Classic is running [2025-09-24 12:24:19.438] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:24:19.438] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:24:20.045] INIT: version 2.96 booting [2025-09-24 12:24:20.158] INIT: Entering runlevel: 5 [2025-09-24 12:24:20.317] mtd24 attached [2025-09-24 12:24:20.317] mtd28 attached [2025-09-24 12:24:20.333] mtd32 attached [2025-09-24 12:24:20.365] ubi0:textures is mounted. [2025-09-24 12:24:20.381] ubi1:animations is mounted. [2025-09-24 12:24:20.381] RTNETLINK answers: File exists [2025-09-24 12:24:20.440] ubi2:dml_code is mounted. [2025-09-24 12:24:20.440] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:24:20.440] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:24:20.440] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:24:20.440] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:24:20.440] data.LB_FadeInType0=100 [2025-09-24 12:24:20.440] data.CHLH_FadeInType0=0 [2025-09-24 12:24:20.440] data.WU_FadeInDelay=0 [2025-09-24 12:24:20.440] max_time_out=0 [2025-09-24 12:24:20.440] No splash screen [2025-09-24 12:24:20.440] stop dss Done [2025-09-24 12:24:20.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:24:20.488] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:24:20.524] /dev/mem opened. [2025-09-24 12:24:20.524] Memory mapped at address 0xffff96078000. [2025-09-24 12:24:20.524] Read at address 0x00600018 (0xffff96078018): 0x00000000 [2025-09-24 12:24:20.524] Write at address 0x00600018 (0xffff96078018): 0x00400040, readback 0x00400040 [2025-09-24 12:24:20.524] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:24:20.620] Loaded PowerVR consumer services. [2025-09-24 12:24:20.762] Waiting data available... [2025-09-24 12:24:20.762] 512+0 records in [2025-09-24 12:24:20.762] 512+0 records out [2025-09-24 12:24:20.778] Starting syslogd/klogd: done [2025-09-24 12:24:20.794] DML Start [2025-09-24 12:24:20.970] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:24:21.194] DML res1: 0 [2025-09-24 12:24:21.668] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:24:21.668] Read Success [2025-09-24 12:24:21.668] Verifying certificate... [2025-09-24 12:24:21.892] Verified OK [2025-09-24 12:24:21.908] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:24:23.570] Verified OK [2025-09-24 12:24:23.570] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:24:24.258] Verified OK [2025-09-24 12:24:24.258] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:24:26.976] fs.protected_hardlinks = 1 [2025-09-24 12:24:26.976] fs.protected_symlinks = 1 [2025-09-24 12:24:26.992] kernel.modules_disabled = 1 [2025-09-24 12:24:27.216] [2025-09-24 12:24:27.216] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:24:28.330] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:24:30.610] SBL1:1210.0.1.0 [2025-09-24 12:24:36.078] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:24:37.644] SBL2:1210.0.1.0 [2025-09-24 12:24:37.676] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:24:37.789] j-A [2025-09-24 12:24:45.162] The R5 Autosar Classic is running [2025-09-24 12:24:45.162] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:24:45.162] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:24:45.769] INIT: version 2.96 booting [2025-09-24 12:24:45.881] INIT: Entering runlevel: 5 [2025-09-24 12:24:46.042] mtd32 attached [2025-09-24 12:24:46.057] mtd28 attached [2025-09-24 12:24:46.057] mtd24 attached [2025-09-24 12:24:46.105] RTNETLINK answers: File exists [2025-09-24 12:24:46.180] ubi2:textures is mounted. [2025-09-24 12:24:46.180] ubi0:dml_code is mounted. [2025-09-24 12:24:46.180] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:24:46.180] ubi1:animations is mounted. [2025-09-24 12:24:46.180] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:24:46.180] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:24:46.180] data.LB_FadeInType0=100 [2025-09-24 12:24:46.180] data.CHLH_FadeInType0=0 [2025-09-24 12:24:46.180] data.WU_FadeInDelay=0 [2025-09-24 12:24:46.180] max_time_out=0 [2025-09-24 12:24:46.180] No splash screen [2025-09-24 12:24:46.180] stop dss Done [2025-09-24 12:24:46.180] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:24:46.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:24:46.212] /dev/mem opened. [2025-09-24 12:24:46.212] Memory mapped at address 0xffffa92ba000. [2025-09-24 12:24:46.239] Read at address 0x00600018 (0xffffa92ba018): 0x00000000 [2025-09-24 12:24:46.239] Write at address 0x00600018 (0xffffa92ba018): 0x00400040, readback 0x00400040 [2025-09-24 12:24:46.271] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:24:46.287] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:24:46.446] Loaded PowerVR consumer services. [2025-09-24 12:24:46.478] 512+0 records in [2025-09-24 12:24:46.494] 512+0 records out [2025-09-24 12:24:46.494] Waiting data available... [2025-09-24 12:24:46.526] Starting syslogd/klogd: done [2025-09-24 12:24:46.542] DML Start [2025-09-24 12:24:46.718] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:24:46.910] DML res1: 0 [2025-09-24 12:24:47.420] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:24:47.420] Read Success [2025-09-24 12:24:47.420] Verifying certificate... [2025-09-24 12:24:47.643] Verified OK [2025-09-24 12:24:47.659] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:24:49.419] Verified OK [2025-09-24 12:24:49.419] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:24:49.962] Verified OK [2025-09-24 12:24:49.962] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:24:52.553] fs.protected_hardlinks = 1 [2025-09-24 12:24:52.553] fs.protected_symlinks = 1 [2025-09-24 12:24:52.569] kernel.modules_disabled = 1 [2025-09-24 12:24:52.744] [2025-09-24 12:24:52.744] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:24:54.064] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:25:01.757] SBL1:1210.0.1.0 [2025-09-24 12:25:01.789] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:25:03.372] SBL2:1210.0.1.0 [2025-09-24 12:25:03.404] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:25:03.516] j-A [2025-09-24 12:25:10.855] The R5 Autosar Classic is running [2025-09-24 12:25:10.886] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:25:10.886] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:25:11.494] INIT: version 2.96 booting [2025-09-24 12:25:11.589] INIT: Entering runlevel: 5 [2025-09-24 12:25:11.749] mtd28 attached [2025-09-24 12:25:11.765] mtd32 attached [2025-09-24 12:25:11.781] mtd24 attached [2025-09-24 12:25:11.797] ubi0:animations is mounted. [2025-09-24 12:25:11.882] RTNETLINK answers: File exists [2025-09-24 12:25:11.882] ubi1:dml_code is mounted. [2025-09-24 12:25:11.882] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:25:11.882] ubi2:textures is mounted. [2025-09-24 12:25:11.882] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:25:11.882] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:25:11.882] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:25:11.882] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:25:11.882] data.LB_FadeInType0=100 [2025-09-24 12:25:11.882] data.CHLH_FadeInType0=0 [2025-09-24 12:25:11.882] data.WU_FadeInDelay=0 [2025-09-24 12:25:11.882] max_time_out=0 [2025-09-24 12:25:11.882] No splash screen [2025-09-24 12:25:11.882] stop dss Done [2025-09-24 12:25:11.897] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:25:11.944] /dev/mem opened. [2025-09-24 12:25:11.944] Memory mapped at address 0xffffb76df000. [2025-09-24 12:25:11.944] Read at address 0x00600018 (0xffffb76df018): 0x00000000 [2025-09-24 12:25:11.944] Write at address 0x00600018 (0xffffb76df018): 0x00400040, readback 0x00400040 [2025-09-24 12:25:11.944] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:25:12.168] Loaded PowerVR consumer services. [2025-09-24 12:25:12.200] 512+0 records in [2025-09-24 12:25:12.200] 512+0 records out [2025-09-24 12:25:12.232] Starting syslogd/klogd: Waiting data available... [2025-09-24 12:25:12.232] done [2025-09-24 12:25:12.248] DML Start [2025-09-24 12:25:12.439] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:25:12.679] DML res1: 0 [2025-09-24 12:25:13.061] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:25:13.061] Read Success [2025-09-24 12:25:13.061] Verifying certificate... [2025-09-24 12:25:13.317] Verified OK [2025-09-24 12:25:13.333] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:25:14.955] Verified OK [2025-09-24 12:25:14.955] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:25:15.578] Verified OK [2025-09-24 12:25:15.578] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:25:18.297] fs.protected_hardlinks = 1 [2025-09-24 12:25:18.297] fs.protected_symlinks = 1 [2025-09-24 12:25:18.313] kernel.modules_disabled = 1 [2025-09-24 12:25:18.521] [2025-09-24 12:25:18.521] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:25:19.768] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:25:27.467] SBL1:1210.0.1.0 [2025-09-24 12:25:27.515] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:25:29.081] SBL2:1210.0.1.0 [2025-09-24 12:25:29.129] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:25:29.225] j-A [2025-09-24 12:25:36.579] The R5 Autosar Classic is running [2025-09-24 12:25:36.579] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:25:36.600] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:25:37.208] INIT: version 2.96 booting [2025-09-24 12:25:37.320] INIT: Entering runlevel: 5 [2025-09-24 12:25:37.480] mtd32 attached [2025-09-24 12:25:37.480] mtd28 attached [2025-09-24 12:25:37.495] mtd24 attached [2025-09-24 12:25:37.582] RTNETLINK answers: File exists [2025-09-24 12:25:37.582] ubi0:dml_code is mounted. [2025-09-24 12:25:37.582] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:25:37.582] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:25:37.582] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:25:37.582] ubi1:animations is mounted. [2025-09-24 12:25:37.582] ubi2:textures is mounted. [2025-09-24 12:25:37.582] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:25:37.582] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:25:37.609] data.LB_FadeInType0=100 [2025-09-24 12:25:37.609] data.CHLH_FadeInType0=0 [2025-09-24 12:25:37.609] data.WU_FadeInDelay=0 [2025-09-24 12:25:37.609] max_time_out=0 [2025-09-24 12:25:37.609] No splash screen [2025-09-24 12:25:37.609] stop dss Done [2025-09-24 12:25:37.641] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:25:37.687] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:25:37.687] /dev/mem opened. [2025-09-24 12:25:37.687] Memory mapped at address 0xffffa5f58000. [2025-09-24 12:25:37.687] Read at address 0x00600018 (0xffffa5f58018): 0x00000000 [2025-09-24 12:25:37.687] Write at address 0x00600018 (0xffffa5f58018): 0x00400040, readback 0x00400040 [2025-09-24 12:25:37.862] Loaded PowerVR consumer services. [2025-09-24 12:25:37.894] 512+0 records in [2025-09-24 12:25:37.894] 512+0 records out [2025-09-24 12:25:37.942] Waiting data available... [2025-09-24 12:25:37.958] Starting syslogd/klogd: done [2025-09-24 12:25:37.974] DML Start [2025-09-24 12:25:38.135] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:25:38.438] DML res1: 0 [2025-09-24 12:25:38.771] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:25:38.771] Read Success [2025-09-24 12:25:38.771] Verifying certificate... [2025-09-24 12:25:38.995] Verified OK [2025-09-24 12:25:39.026] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:25:40.764] Verified OK [2025-09-24 12:25:40.764] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:25:41.376] Verified OK [2025-09-24 12:25:41.376] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:25:44.111] fs.protected_hardlinks = 1 [2025-09-24 12:25:44.127] fs.protected_symlinks = 1 [2025-09-24 12:25:44.127] kernel.modules_disabled = 1 [2025-09-24 12:25:44.334] [2025-09-24 12:25:44.334] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:25:45.501] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:25:53.195] SBL1:1210.0.1.0 [2025-09-24 12:25:53.243] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:25:54.810] SBL2:1210.0.1.0 [2025-09-24 12:25:54.842] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:25:54.954] j-A [2025-09-24 12:26:02.327] The R5 Autosar Classic is running [2025-09-24 12:26:02.327] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:26:02.327] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:26:02.934] INIT: version 2.96 booting [2025-09-24 12:26:03.046] INIT: Entering runlevel: 5 [2025-09-24 12:26:03.190] mtd28 attached [2025-09-24 12:26:03.206] mtd24 attached [2025-09-24 12:26:03.222] mtd32 attached [2025-09-24 12:26:03.270] RTNETLINK answers: File exists [2025-09-24 12:26:03.270] ubi0:animations is mounted. [2025-09-24 12:26:03.337] ubi1:textures is mounted. [2025-09-24 12:26:03.337] ubi2:dml_code is mounted. [2025-09-24 12:26:03.337] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:26:03.337] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:26:03.337] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:26:03.337] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:26:03.337] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:26:03.337] data.LB_FadeInType0=100 [2025-09-24 12:26:03.337] data.CHLH_FadeInType0=0 [2025-09-24 12:26:03.337] data.WU_FadeInDelay=0 [2025-09-24 12:26:03.337] max_time_out=0 [2025-09-24 12:26:03.337] No splash screen [2025-09-24 12:26:03.337] stop dss Done [2025-09-24 12:26:03.413] /dev/mem opened. [2025-09-24 12:26:03.413] Memory mapped at address 0xffff9fe9a000. [2025-09-24 12:26:03.413] Read at address 0x00600018 (0xffff9fe9a018): 0x00000000 [2025-09-24 12:26:03.413] Write at address 0x00600018 (0xffff9fe9a018): 0x00400040, readback 0x00400040 [2025-09-24 12:26:03.413] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:26:03.413] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:26:03.510] Loaded PowerVR consumer services. [2025-09-24 12:26:03.637] 512+0 records in [2025-09-24 12:26:03.637] 512+0 records out [2025-09-24 12:26:03.653] Waiting data available... [2025-09-24 12:26:03.685] Starting syslogd/klogd: done [2025-09-24 12:26:03.701] DML Start [2025-09-24 12:26:03.876] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:26:04.085] DML res1: 0 [2025-09-24 12:26:04.540] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:26:04.540] Read Success [2025-09-24 12:26:04.540] Verifying certificate... [2025-09-24 12:26:04.779] Verified OK [2025-09-24 12:26:04.812] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:26:06.385] Verified OK [2025-09-24 12:26:06.385] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:26:06.992] Verified OK [2025-09-24 12:26:06.992] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:26:09.743] fs.protected_hardlinks = 1 [2025-09-24 12:26:09.743] fs.protected_symlinks = 1 [2025-09-24 12:26:09.758] kernel.modules_disabled = 1 [2025-09-24 12:26:09.967] [2025-09-24 12:26:09.967] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:26:11.193] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:26:18.928] SBL1:1210.0.1.0 [2025-09-24 12:26:18.960] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:26:20.543] SBL2:1210.0.1.0 [2025-09-24 12:26:20.575] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:26:20.687] j-A [2025-09-24 12:26:28.059] The R5 Autosar Classic is running [2025-09-24 12:26:28.059] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:26:28.059] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:26:28.666] INIT: version 2.96 booting [2025-09-24 12:26:28.778] INIT: Entering runlevel: 5 [2025-09-24 12:26:28.922] mtd24 attached [2025-09-24 12:26:28.938] mtd32 attached [2025-09-24 12:26:28.954] mtd28 attached [2025-09-24 12:26:28.970] ubi0:textures is mounted. [2025-09-24 12:26:28.985] ubi1:dml_code is mounted. [2025-09-24 12:26:29.002] RTNETLINK answers: File exists [2025-09-24 12:26:29.054] ubi2:animations is mounted. [2025-09-24 12:26:29.054] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:26:29.054] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:26:29.054] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:26:29.054] data.LB_FadeInType0=100 [2025-09-24 12:26:29.054] data.CHLH_FadeInType0=0 [2025-09-24 12:26:29.054] data.WU_FadeInDelay=0 [2025-09-24 12:26:29.054] max_time_out=0 [2025-09-24 12:26:29.054] No splash screen [2025-09-24 12:26:29.054] stop dss Done [2025-09-24 12:26:29.054] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:26:29.054] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:26:29.086] /dev/mem opened. [2025-09-24 12:26:29.113] Memory mapped at address 0xffffa1799000. [2025-09-24 12:26:29.113] Read at address 0x00600018 (0xffffa1799018): 0x00000000 [2025-09-24 12:26:29.113] Write at address 0x00600018 (0xffffa1799018): 0x00400040, readback 0x00400040 [2025-09-24 12:26:29.168] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:26:29.168] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:26:29.264] Loaded PowerVR consumer services. [2025-09-24 12:26:29.387] 512+0 records in [2025-09-24 12:26:29.387] 512+0 records out [2025-09-24 12:26:29.387] Waiting data available... [2025-09-24 12:26:29.418] Starting syslogd/klogd: done [2025-09-24 12:26:29.434] DML Start [2025-09-24 12:26:29.627] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:26:29.867] DML res1: 0 [2025-09-24 12:26:30.281] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:26:30.281] Read Success [2025-09-24 12:26:30.281] Verifying certificate... [2025-09-24 12:26:30.536] Verified OK [2025-09-24 12:26:30.552] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:26:32.221] Verified OK [2025-09-24 12:26:32.221] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:26:32.839] Verified OK [2025-09-24 12:26:32.839] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:26:35.381] fs.protected_hardlinks = 1 [2025-09-24 12:26:35.381] fs.protected_symlinks = 1 [2025-09-24 12:26:35.397] kernel.modules_disabled = 1 [2025-09-24 12:26:35.573] [2025-09-24 12:26:35.573] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:26:36.972] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:26:44.637] SBL1:1210.0.1.0 [2025-09-24 12:26:44.685] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:26:46.268] SBL2:1210.0.1.0 [2025-09-24 12:26:46.300] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:26:46.396] j-A [2025-09-24 12:26:53.750] The R5 Autosar Classic is running [2025-09-24 12:26:53.775] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:26:53.775] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:26:54.382] INIT: version 2.96 booting [2025-09-24 12:26:54.494] INIT: Entering runlevel: 5 [2025-09-24 12:26:54.654] mtd32 attached [2025-09-24 12:26:54.654] mtd28 attached [2025-09-24 12:26:54.670] mtd24 attached [2025-09-24 12:26:54.718] RTNETLINK answers: File exists [2025-09-24 12:26:54.762] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:26:54.762] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:26:54.762] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:26:54.762] ubi1:animations is mounted. [2025-09-24 12:26:54.762] ubi0:dml_code is mounted. [2025-09-24 12:26:54.762] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:26:54.762] ubi2:textures is mounted. [2025-09-24 12:26:54.762] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:26:54.788] data.LB_FadeInType0=100 [2025-09-24 12:26:54.788] data.CHLH_FadeInType0=0 [2025-09-24 12:26:54.788] data.WU_FadeInDelay=0 [2025-09-24 12:26:54.788] max_time_out=0 [2025-09-24 12:26:54.788] No splash screen [2025-09-24 12:26:54.788] stop dss Done [2025-09-24 12:26:54.815] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:26:54.815] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:26:54.864] /dev/mem opened. [2025-09-24 12:26:54.864] Memory mapped at address 0xffff91395000. [2025-09-24 12:26:54.864] Read at address 0x00600018 (0xffff91395018): 0x00000000 [2025-09-24 12:26:54.864] Write at address 0x00600018 (0xffff91395018): 0x00400040, readback 0x00400040 [2025-09-24 12:26:54.961] Loaded PowerVR consumer services. [2025-09-24 12:26:55.103] Waiting data available... [2025-09-24 12:26:55.103] 512+0 records in [2025-09-24 12:26:55.103] 512+0 records out [2025-09-24 12:26:55.119] Starting syslogd/klogd: done [2025-09-24 12:26:55.135] DML Start [2025-09-24 12:26:55.312] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:26:55.520] DML res1: 0 [2025-09-24 12:26:56.009] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:26:56.009] Read Success [2025-09-24 12:26:56.009] Verifying certificate... [2025-09-24 12:26:56.281] Verified OK [2025-09-24 12:26:56.281] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:26:57.880] Verified OK [2025-09-24 12:26:57.880] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:26:58.547] Verified OK [2025-09-24 12:26:58.547] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:27:01.185] fs.protected_hardlinks = 1 [2025-09-24 12:27:01.185] fs.protected_symlinks = 1 [2025-09-24 12:27:01.201] kernel.modules_disabled = 1 [2025-09-24 12:27:01.378] [2025-09-24 12:27:01.378] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:27:02.648] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:27:10.371] SBL1:1210.0.1.0 [2025-09-24 12:27:10.403] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:27:11.986] SBL2:1210.0.1.0 [2025-09-24 12:27:12.018] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:27:12.114] j-A [2025-09-24 12:27:19.469] The R5 Autosar Classic is running [2025-09-24 12:27:19.493] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:27:19.493] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:27:20.100] INIT: version 2.96 booting [2025-09-24 12:27:20.212] INIT: Entering runlevel: 5 [2025-09-24 12:27:20.372] mtd28 attached [2025-09-24 12:27:20.372] mtd24 attached [2025-09-24 12:27:20.388] mtd32 attached [2025-09-24 12:27:20.436] RTNETLINK answers: File exists [2025-09-24 12:27:20.476] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:27:20.476] ubi0:animations is mounted. [2025-09-24 12:27:20.476] ubi1:textures is mounted. [2025-09-24 12:27:20.476] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:27:20.476] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:27:20.476] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:27:20.476] ubi2:dml_code is mounted. [2025-09-24 12:27:20.476] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:27:20.502] data.LB_FadeInType0=100 [2025-09-24 12:27:20.502] data.CHLH_FadeInType0=0 [2025-09-24 12:27:20.502] data.WU_FadeInDelay=0 [2025-09-24 12:27:20.502] max_time_out=0 [2025-09-24 12:27:20.502] No splash screen [2025-09-24 12:27:20.502] stop dss Done [2025-09-24 12:27:20.518] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:27:20.534] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:27:20.550] /dev/mem opened. [2025-09-24 12:27:20.550] Memory mapped at address 0xffff81b61000. [2025-09-24 12:27:20.576] Read at address 0x00600018 (0xffff81b61018): 0x00000000 [2025-09-24 12:27:20.576] Write at address 0x00600018 (0xffff81b61018): 0x00400040, readback 0x00400040 [2025-09-24 12:27:20.768] Loaded PowerVR consumer services. [2025-09-24 12:27:20.800] Waiting data available... [2025-09-24 12:27:20.800] 512+0 records in [2025-09-24 12:27:20.816] 512+0 records out [2025-09-24 12:27:20.848] Starting syslogd/klogd: done [2025-09-24 12:27:20.864] DML Start [2025-09-24 12:27:21.056] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:27:21.279] DML res1: 0 [2025-09-24 12:27:21.711] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:27:21.711] Read Success [2025-09-24 12:27:21.727] Verifying certificate... [2025-09-24 12:27:21.999] Verified OK [2025-09-24 12:27:22.014] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:27:23.588] Verified OK [2025-09-24 12:27:23.588] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:27:24.207] Verified OK [2025-09-24 12:27:24.207] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:27:26.973] fs.protected_hardlinks = 1 [2025-09-24 12:27:26.988] fs.protected_symlinks = 1 [2025-09-24 12:27:26.988] kernel.modules_disabled = 1 [2025-09-24 12:27:27.181] [2025-09-24 12:27:27.181] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:27:28.368] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:27:36.103] SBL1:1210.0.1.0 [2025-09-24 12:27:36.151] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:27:37.717] SBL2:1210.0.1.0 [2025-09-24 12:27:37.749] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:27:37.861] j-A [2025-09-24 12:27:45.233] The R5 Autosar Classic is running [2025-09-24 12:27:45.233] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:27:45.233] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:27:45.841] INIT: version 2.96 booting [2025-09-24 12:27:45.952] INIT: Entering runlevel: 5 [2025-09-24 12:27:46.113] mtd24 attached [2025-09-24 12:27:46.113] mtd28 attached [2025-09-24 12:27:46.129] mtd32 attached [2025-09-24 12:27:46.177] ubi0:textures is mounted. [2025-09-24 12:27:46.177] RTNETLINK answers: File exists [2025-09-24 12:27:46.241] ubi1:animations is mounted. [2025-09-24 12:27:46.241] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:27:46.241] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:27:46.241] ubi2:dml_code is mounted. [2025-09-24 12:27:46.241] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:27:46.241] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:27:46.241] data.LB_FadeInType0=100 [2025-09-24 12:27:46.241] data.CHLH_FadeInType0=0 [2025-09-24 12:27:46.241] data.WU_FadeInDelay=0 [2025-09-24 12:27:46.241] max_time_out=0 [2025-09-24 12:27:46.241] No splash screen [2025-09-24 12:27:46.241] stop dss Done [2025-09-24 12:27:46.241] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:27:46.329] /dev/mem opened. [2025-09-24 12:27:46.329] Memory mapped at address 0xffffabbf9000. [2025-09-24 12:27:46.329] Read at address 0x00600018 (0xffffabbf9018): 0x00000000 [2025-09-24 12:27:46.329] Write at address 0x00600018 (0xffffabbf9018): 0x00400040, readback 0x00400040 [2025-09-24 12:27:46.329] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:27:46.329] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:27:46.505] Loaded PowerVR consumer services. [2025-09-24 12:27:46.552] 512+0 records in [2025-09-24 12:27:46.552] 512+0 records out [2025-09-24 12:27:46.552] Waiting data available... [2025-09-24 12:27:46.600] Starting syslogd/klogd: done [2025-09-24 12:27:46.616] DML Start [2025-09-24 12:27:46.792] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:27:47.016] DML res1: 0 [2025-09-24 12:27:47.479] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:27:47.496] Read Success [2025-09-24 12:27:47.496] Verifying certificate... [2025-09-24 12:27:47.752] Verified OK [2025-09-24 12:27:47.767] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:27:49.423] Verified OK [2025-09-24 12:27:49.423] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:27:50.020] Verified OK [2025-09-24 12:27:50.020] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:27:52.659] fs.protected_hardlinks = 1 [2025-09-24 12:27:52.659] fs.protected_symlinks = 1 [2025-09-24 12:27:52.674] kernel.modules_disabled = 1 [2025-09-24 12:27:52.882] [2025-09-24 12:27:52.882] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:27:54.095] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:28:01.824] SBL1:1210.0.1.0 [2025-09-24 12:28:01.872] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:28:03.455] SBL2:1210.0.1.0 [2025-09-24 12:28:03.487] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:28:03.582] j-A [2025-09-24 12:28:10.938] The R5 Autosar Classic is running [2025-09-24 12:28:10.962] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:28:10.962] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:28:11.569] INIT: version 2.96 booting [2025-09-24 12:28:11.681] INIT: Entering runlevel: 5 [2025-09-24 12:28:11.841] mtd32 attached [2025-09-24 12:28:11.857] mtd24 attached [2025-09-24 12:28:11.857] mtd28 attached [2025-09-24 12:28:11.905] ubi0:dml_code is mounted. [2025-09-24 12:28:11.905] ubi1:textures is mounted. [2025-09-24 12:28:11.953] RTNETLINK answers: File exists [2025-09-24 12:28:11.953] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:28:11.953] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:28:11.953] ubi2:animations is mounted. [2025-09-24 12:28:11.953] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:28:11.953] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:28:11.953] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:28:11.953] data.LB_FadeInType0=100 [2025-09-24 12:28:11.953] data.CHLH_FadeInType0=0 [2025-09-24 12:28:11.974] data.WU_FadeInDelay=0 [2025-09-24 12:28:11.974] max_time_out=0 [2025-09-24 12:28:11.974] No splash screen [2025-09-24 12:28:11.974] stop dss Done [2025-09-24 12:28:12.022] /dev/mem opened. [2025-09-24 12:28:12.022] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:28:12.054] Memory mapped at address 0xffff9839c000. [2025-09-24 12:28:12.054] Read at address 0x00600018 (0xffff9839c018): 0x00000000 [2025-09-24 12:28:12.054] Write at address 0x00600018 (0xffff9839c018): 0x00400040, readback 0x00400040 [2025-09-24 12:28:12.054] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:28:12.262] Loaded PowerVR consumer services. [2025-09-24 12:28:12.294] 512+0 records in [2025-09-24 12:28:12.294] 512+0 records out [2025-09-24 12:28:12.310] Waiting data available... [2025-09-24 12:28:12.342] Starting syslogd/klogd: done [2025-09-24 12:28:12.358] DML Start [2025-09-24 12:28:12.518] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:28:12.725] DML res1: 0 [2025-09-24 12:28:13.229] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:28:13.229] Read Success [2025-09-24 12:28:13.229] Verifying certificate... [2025-09-24 12:28:13.438] Verified OK [2025-09-24 12:28:13.453] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:28:15.058] Verified OK [2025-09-24 12:28:15.058] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:28:15.648] Verified OK [2025-09-24 12:28:15.648] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:28:18.316] fs.protected_hardlinks = 1 [2025-09-24 12:28:18.316] fs.protected_symlinks = 1 [2025-09-24 12:28:18.316] kernel.modules_disabled = 1 [2025-09-24 12:28:18.508] [2025-09-24 12:28:18.508] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:28:19.875] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:28:27.557] SBL1:1210.0.1.0 [2025-09-24 12:28:27.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:28:29.172] SBL2:1210.0.1.0 [2025-09-24 12:28:29.204] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:28:29.315] j-A [2025-09-24 12:28:36.654] The R5 Autosar Classic is running [2025-09-24 12:28:36.686] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:28:36.686] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:28:37.293] INIT: version 2.96 booting [2025-09-24 12:28:37.405] INIT: Entering runlevel: 5 [2025-09-24 12:28:37.549] mtd24 attached [2025-09-24 12:28:37.565] mtd32 attached [2025-09-24 12:28:37.581] mtd28 attached [2025-09-24 12:28:37.597] ubi0:textures is mounted. [2025-09-24 12:28:37.629] RTNETLINK answers: File exists [2025-09-24 12:28:37.629] ubi2:animations is mounted. [2025-09-24 12:28:37.680] ubi1:dml_code is mounted. [2025-09-24 12:28:37.680] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:28:37.680] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:28:37.680] data.LB_FadeInType0=100 [2025-09-24 12:28:37.680] data.CHLH_FadeInType0=0 [2025-09-24 12:28:37.680] data.WU_FadeInDelay=0 [2025-09-24 12:28:37.680] max_time_out=0 [2025-09-24 12:28:37.680] No splash screen [2025-09-24 12:28:37.680] stop dss Done [2025-09-24 12:28:37.680] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:28:37.680] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:28:37.696] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:28:37.728] /dev/mem opened. [2025-09-24 12:28:37.728] Memory mapped at address 0xffff7fae4000. [2025-09-24 12:28:37.728] Read at address 0x00600018 (0xffff7fae4018): 0x00000000 [2025-09-24 12:28:37.754] Write at address 0x00600018 (0xffff7fae4018): 0x00400040, readback 0x00400040 [2025-09-24 12:28:37.754] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:28:37.770] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:28:37.961] Loaded PowerVR consumer services. [2025-09-24 12:28:37.993] 512+0 records in [2025-09-24 12:28:37.993] 512+0 records out [2025-09-24 12:28:37.993] Waiting data available... [2025-09-24 12:28:38.042] Starting syslogd/klogd: done [2025-09-24 12:28:38.058] DML Start [2025-09-24 12:28:38.234] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:28:38.474] DML res1: 0 [2025-09-24 12:28:38.899] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:28:38.899] Read Success [2025-09-24 12:28:38.899] Verifying certificate... [2025-09-24 12:28:39.155] Verified OK [2025-09-24 12:28:39.171] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:28:40.783] Verified OK [2025-09-24 12:28:40.783] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:28:41.401] Verified OK [2025-09-24 12:28:41.401] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:28:44.071] fs.protected_hardlinks = 1 [2025-09-24 12:28:44.071] fs.protected_symlinks = 1 [2025-09-24 12:28:44.087] kernel.modules_disabled = 1 [2025-09-24 12:28:44.279] [2025-09-24 12:28:44.279] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:28:45.571] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:28:53.254] SBL1:1210.0.1.0 [2025-09-24 12:28:53.302] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:28:54.869] SBL2:1210.0.1.0 [2025-09-24 12:28:54.917] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:28:55.013] j-A [2025-09-24 12:29:02.368] The R5 Autosar Classic is running [2025-09-24 12:29:02.392] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:29:02.392] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:29:03.000] INIT: version 2.96 booting [2025-09-24 12:29:03.112] INIT: Entering runlevel: 5 [2025-09-24 12:29:03.256] mtd28 attached [2025-09-24 12:29:03.272] mtd32 attached [2025-09-24 12:29:03.288] mtd24 attached [2025-09-24 12:29:03.303] ubi0:animations is mounted. [2025-09-24 12:29:03.319] ubi1:dml_code is mounted. [2025-09-24 12:29:03.335] RTNETLINK answers: File exists [2025-09-24 12:29:03.393] ubi2:textures is mounted. [2025-09-24 12:29:03.393] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:29:03.393] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:29:03.393] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:29:03.393] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:29:03.393] data.LB_FadeInType0=100 [2025-09-24 12:29:03.393] data.CHLH_FadeInType0=0 [2025-09-24 12:29:03.393] data.WU_FadeInDelay=0 [2025-09-24 12:29:03.393] max_time_out=0 [2025-09-24 12:29:03.393] No splash screen [2025-09-24 12:29:03.393] stop dss Done [2025-09-24 12:29:03.393] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:29:03.441] /dev/mem opened. [2025-09-24 12:29:03.441] Memory mapped at address 0xffff9e686000. [2025-09-24 12:29:03.473] Read at address 0x00600018 (0xffff9e686018): 0x00000000 [2025-09-24 12:29:03.473] Write at address 0x00600018 (0xffff9e686018): 0x00400040, readback 0x00400040 [2025-09-24 12:29:03.473] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:29:03.473] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:29:03.681] Loaded PowerVR consumer services. [2025-09-24 12:29:03.697] 512+0 records in [2025-09-24 12:29:03.697] 512+0 records out [2025-09-24 12:29:03.729] Starting syslogd/klogd: done [2025-09-24 12:29:03.745] Waiting data available... [2025-09-24 12:29:03.761] DML Start [2025-09-24 12:29:03.889] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:29:04.161] DML res1: 0 [2025-09-24 12:29:04.593] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:29:04.593] Read Success [2025-09-24 12:29:04.609] Verifying certificate... [2025-09-24 12:29:04.880] Verified OK [2025-09-24 12:29:04.896] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:29:06.568] Verified OK [2025-09-24 12:29:06.568] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:29:07.224] Verified OK [2025-09-24 12:29:07.224] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:29:09.847] fs.protected_hardlinks = 1 [2025-09-24 12:29:09.863] fs.protected_symlinks = 1 [2025-09-24 12:29:09.863] kernel.modules_disabled = 1 [2025-09-24 12:29:10.055] [2025-09-24 12:29:10.055] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:29:11.250] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:29:18.975] SBL1:1210.0.1.0 [2025-09-24 12:29:19.023] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:29:20.590] SBL2:1210.0.1.0 [2025-09-24 12:29:20.638] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:29:20.733] j-A [2025-09-24 12:29:28.088] The R5 Autosar Classic is running [2025-09-24 12:29:28.110] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:29:28.110] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:29:28.718] INIT: version 2.96 booting [2025-09-24 12:29:28.830] INIT: Entering runlevel: 5 [2025-09-24 12:29:28.990] mtd32 attached [2025-09-24 12:29:28.990] mtd24 attached [2025-09-24 12:29:29.006] mtd28 attached [2025-09-24 12:29:29.091] RTNETLINK answers: File exists [2025-09-24 12:29:29.091] ubi0:dml_code is mounted. [2025-09-24 12:29:29.091] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:29:29.091] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:29:29.091] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:29:29.091] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:29:29.091] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:29:29.091] ubi1:textures is mounted. [2025-09-24 12:29:29.091] ubi2:animations is mounted. [2025-09-24 12:29:29.107] data.LB_FadeInType0=100 [2025-09-24 12:29:29.107] data.CHLH_FadeInType0=0 [2025-09-24 12:29:29.128] data.WU_FadeInDelay=0 [2025-09-24 12:29:29.128] max_time_out=0 [2025-09-24 12:29:29.128] No splash screen [2025-09-24 12:29:29.128] stop dss Done [2025-09-24 12:29:29.144] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:29:29.160] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:29:29.195] /dev/mem opened. [2025-09-24 12:29:29.195] Memory mapped at address 0xffff87f6b000. [2025-09-24 12:29:29.195] Read at address 0x00600018 (0xffff87f6b018): 0x00000000 [2025-09-24 12:29:29.195] Write at address 0x00600018 (0xffff87f6b018): 0x00400040, readback 0x00400040 [2025-09-24 12:29:29.308] Loaded PowerVR consumer services. [2025-09-24 12:29:29.451] Waiting data available... [2025-09-24 12:29:29.451] 512+0 records in [2025-09-24 12:29:29.451] 512+0 records out [2025-09-24 12:29:29.482] Starting syslogd/klogd: done [2025-09-24 12:29:29.498] DML Start [2025-09-24 12:29:29.642] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:29:29.850] DML res1: 0 [2025-09-24 12:29:30.419] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:29:30.419] Read Success [2025-09-24 12:29:30.419] Verifying certificate... [2025-09-24 12:29:30.643] Verified OK [2025-09-24 12:29:30.659] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:29:32.290] Verified OK [2025-09-24 12:29:32.305] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:29:32.927] Verified OK [2025-09-24 12:29:32.927] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:29:35.581] fs.protected_hardlinks = 1 [2025-09-24 12:29:35.597] fs.protected_symlinks = 1 [2025-09-24 12:29:35.613] kernel.modules_disabled = 1 [2025-09-24 12:29:35.804] [2025-09-24 12:29:35.804] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:29:36.986] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:29:44.713] SBL1:1210.0.1.0 [2025-09-24 12:29:44.761] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:29:46.329] SBL2:1210.0.1.0 [2025-09-24 12:29:46.361] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:29:46.472] j-A [2025-09-24 12:29:53.845] The R5 Autosar Classic is running [2025-09-24 12:29:53.845] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:29:53.845] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:29:54.453] INIT: version 2.96 booting [2025-09-24 12:29:54.565] INIT: Entering runlevel: 5 [2025-09-24 12:29:54.724] mtd24 attached [2025-09-24 12:29:54.724] mtd28 attached [2025-09-24 12:29:54.756] ubi0:textures is mounted. [2025-09-24 12:29:54.773] mtd32 attached [2025-09-24 12:29:54.789] RTNETLINK answers: File exists [2025-09-24 12:29:54.854] ubi1:animations is mounted. [2025-09-24 12:29:54.854] ubi2:dml_code is mounted. [2025-09-24 12:29:54.854] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:29:54.854] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:29:54.854] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:29:54.854] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:29:54.854] data.LB_FadeInType0=100 [2025-09-24 12:29:54.854] data.CHLH_FadeInType0=0 [2025-09-24 12:29:54.854] data.WU_FadeInDelay=0 [2025-09-24 12:29:54.854] max_time_out=0 [2025-09-24 12:29:54.854] No splash screen [2025-09-24 12:29:54.854] stop dss Done [2025-09-24 12:29:54.854] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:29:54.885] /dev/mem opened. [2025-09-24 12:29:54.912] Memory mapped at address 0xffff9e0f4000. [2025-09-24 12:29:54.912] Read at address 0x00600018 (0xffff9e0f4018): 0x00000000 [2025-09-24 12:29:54.912] Write at address 0x00600018 (0xffff9e0f4018): 0x00400040, readback 0x00400040 [2025-09-24 12:29:54.959] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:29:54.975] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:29:55.071] Loaded PowerVR consumer services. [2025-09-24 12:29:55.196] Waiting data available... [2025-09-24 12:29:55.196] 512+0 records in [2025-09-24 12:29:55.196] 512+0 records out [2025-09-24 12:29:55.228] Starting syslogd/klogd: done [2025-09-24 12:29:55.244] DML Start [2025-09-24 12:29:55.436] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:29:55.644] DML res1: 0 [2025-09-24 12:29:56.075] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:29:56.091] Read Success [2025-09-24 12:29:56.091] Verifying certificate... [2025-09-24 12:29:56.315] Verified OK [2025-09-24 12:29:56.331] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:29:58.154] Verified OK [2025-09-24 12:29:58.154] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:29:58.730] Verified OK [2025-09-24 12:29:58.747] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:30:01.256] fs.protected_hardlinks = 1 [2025-09-24 12:30:01.272] fs.protected_symlinks = 1 [2025-09-24 12:30:01.272] kernel.modules_disabled = 1 [2025-09-24 12:30:01.480] [2025-09-24 12:30:01.480] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:30:02.741] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:30:10.436] SBL1:1210.0.1.0 [2025-09-24 12:30:10.468] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:30:12.050] SBL2:1210.0.1.0 [2025-09-24 12:30:12.082] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:30:12.195] j-A [2025-09-24 12:30:19.566] The R5 Autosar Classic is running [2025-09-24 12:30:19.566] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:30:19.566] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:30:20.173] INIT: version 2.96 booting [2025-09-24 12:30:20.285] INIT: Entering runlevel: 5 [2025-09-24 12:30:20.446] mtd32 attached [2025-09-24 12:30:20.446] mtd28 attached [2025-09-24 12:30:20.462] mtd24 attached [2025-09-24 12:30:20.494] ubi0:dml_code is mounted. [2025-09-24 12:30:20.510] RTNETLINK answers: File exists [2025-09-24 12:30:20.510] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:30:20.549] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:30:20.549] ubi1:animations is mounted. [2025-09-24 12:30:20.549] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:30:20.549] ubi2:textures is mounted. [2025-09-24 12:30:20.549] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:30:20.549] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:30:20.569] data.LB_FadeInType0=100 [2025-09-24 12:30:20.569] data.CHLH_FadeInType0=0 [2025-09-24 12:30:20.569] data.WU_FadeInDelay=0 [2025-09-24 12:30:20.569] max_time_out=0 [2025-09-24 12:30:20.569] No splash screen [2025-09-24 12:30:20.569] stop dss Done [2025-09-24 12:30:20.618] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:30:20.658] /dev/mem opened. [2025-09-24 12:30:20.658] Memory mapped at address 0xffff8915d000. [2025-09-24 12:30:20.658] Read at address 0x00600018 (0xffff8915d018): 0x00000000 [2025-09-24 12:30:20.658] Write at address 0x00600018 (0xffff8915d018): 0x00400040, readback 0x00400040 [2025-09-24 12:30:20.658] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:30:20.834] Loaded PowerVR consumer services. [2025-09-24 12:30:20.866] 512+0 records in [2025-09-24 12:30:20.866] 512+0 records out [2025-09-24 12:30:20.898] Starting syslogd/klogd: done [2025-09-24 12:30:20.946] Waiting data available... [2025-09-24 12:30:20.946] DML Start [2025-09-24 12:30:21.170] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:30:21.410] DML res1: 0 [2025-09-24 12:30:21.777] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:30:21.798] Read Success [2025-09-24 12:30:21.798] Verifying certificate... [2025-09-24 12:30:22.086] Verified OK [2025-09-24 12:30:22.102] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:30:23.883] Verified OK [2025-09-24 12:30:23.883] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:30:24.454] Verified OK [2025-09-24 12:30:24.454] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:30:26.997] fs.protected_hardlinks = 1 [2025-09-24 12:30:27.013] fs.protected_symlinks = 1 [2025-09-24 12:30:27.013] kernel.modules_disabled = 1 [2025-09-24 12:30:27.205] [2025-09-24 12:30:27.205] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:30:28.410] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:30:36.170] SBL1:1210.0.1.0 [2025-09-24 12:30:36.218] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:30:37.785] SBL2:1210.0.1.0 [2025-09-24 12:30:37.817] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:30:37.929] j-A [2025-09-24 12:30:45.283] The R5 Autosar Classic is running [2025-09-24 12:30:45.283] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:30:45.304] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:30:45.912] INIT: version 2.96 booting [2025-09-24 12:30:46.023] INIT: Entering runlevel: 5 [2025-09-24 12:30:46.168] mtd28 attached [2025-09-24 12:30:46.184] mtd24 attached [2025-09-24 12:30:46.200] mtd32 attached [2025-09-24 12:30:46.216] ubi0:animations is mounted. [2025-09-24 12:30:46.301] RTNETLINK answers: File exists [2025-09-24 12:30:46.301] ubi1:textures is mounted. [2025-09-24 12:30:46.301] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:30:46.301] ubi2:dml_code is mounted. [2025-09-24 12:30:46.301] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:30:46.301] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:30:46.301] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:30:46.301] data.LB_FadeInType0=100 [2025-09-24 12:30:46.301] data.CHLH_FadeInType0=0 [2025-09-24 12:30:46.301] data.WU_FadeInDelay=0 [2025-09-24 12:30:46.301] max_time_out=0 [2025-09-24 12:30:46.301] No splash screen [2025-09-24 12:30:46.301] stop dss Done [2025-09-24 12:30:46.301] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:30:46.333] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:30:46.377] /dev/mem opened. [2025-09-24 12:30:46.377] Memory mapped at address 0xffffb8a1e000. [2025-09-24 12:30:46.377] Read at address 0x00600018 (0xffffb8a1e018): 0x00000000 [2025-09-24 12:30:46.377] Write at address 0x00600018 (0xffffb8a1e018): 0x00400040, readback 0x00400040 [2025-09-24 12:30:46.377] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:30:46.488] Loaded PowerVR consumer services. [2025-09-24 12:30:46.616] Waiting data available... [2025-09-24 12:30:46.632] 512+0 records in [2025-09-24 12:30:46.632] 512+0 records out [2025-09-24 12:30:46.648] Starting syslogd/klogd: done [2025-09-24 12:30:46.664] DML Start [2025-09-24 12:30:46.856] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:30:47.096] DML res1: 0 [2025-09-24 12:30:47.464] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:30:47.480] Read Success [2025-09-24 12:30:47.480] Verifying certificate... [2025-09-24 12:30:47.751] Verified OK [2025-09-24 12:30:47.767] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:30:49.523] Verified OK [2025-09-24 12:30:49.523] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:30:50.115] Verified OK [2025-09-24 12:30:50.115] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:30:52.721] fs.protected_hardlinks = 1 [2025-09-24 12:30:52.737] fs.protected_symlinks = 1 [2025-09-24 12:30:52.737] kernel.modules_disabled = 1 [2025-09-24 12:30:52.945] [2025-09-24 12:30:52.945] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:30:54.170] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:31:01.896] SBL1:1210.0.1.0 [2025-09-24 12:31:01.928] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:31:03.511] SBL2:1210.0.1.0 [2025-09-24 12:31:03.543] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:31:03.654] j-A [2025-09-24 12:31:10.993] The R5 Autosar Classic is running [2025-09-24 12:31:11.018] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:31:11.018] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:31:11.625] INIT: version 2.96 booting [2025-09-24 12:31:11.737] INIT: Entering runlevel: 5 [2025-09-24 12:31:11.897] mtd28 attached [2025-09-24 12:31:11.897] mtd24 attached [2025-09-24 12:31:11.929] ubi0:animations is mounted. [2025-09-24 12:31:11.945] ubi1:textures is mounted. [2025-09-24 12:31:11.961] mtd32 attached [2025-09-24 12:31:12.022] RTNETLINK answers: File exists [2025-09-24 12:31:12.022] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:31:12.022] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:31:12.022] ubi2:dml_code is mounted. [2025-09-24 12:31:12.022] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:31:12.022] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:31:12.022] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:31:12.022] data.LB_FadeInType0=100 [2025-09-24 12:31:12.022] data.CHLH_FadeInType0=0 [2025-09-24 12:31:12.022] data.WU_FadeInDelay=0 [2025-09-24 12:31:12.022] max_time_out=0 [2025-09-24 12:31:12.022] No splash screen [2025-09-24 12:31:12.022] stop dss Done [2025-09-24 12:31:12.103] /dev/mem opened. [2025-09-24 12:31:12.103] Memory mapped at address 0xffffa273e000. [2025-09-24 12:31:12.103] Read at address 0x00600018 (0xffffa273e018): 0x00000000 [2025-09-24 12:31:12.103] Write at address 0x00600018 (0xffffa273e018): 0x00400040, readback 0x00400040 [2025-09-24 12:31:12.103] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:31:12.135] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:31:12.248] Loaded PowerVR consumer services. [2025-09-24 12:31:12.344] Waiting data available... [2025-09-24 12:31:12.359] 512+0 records in [2025-09-24 12:31:12.359] 512+0 records out [2025-09-24 12:31:12.375] Starting syslogd/klogd: done [2025-09-24 12:31:12.407] DML Start [2025-09-24 12:31:12.552] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:31:12.727] DML res1: 0 [2025-09-24 12:31:13.270] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:31:13.287] Read Success [2025-09-24 12:31:13.287] Verifying certificate... [2025-09-24 12:31:13.527] Verified OK [2025-09-24 12:31:13.543] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:31:15.250] Verified OK [2025-09-24 12:31:15.250] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:31:15.883] Verified OK [2025-09-24 12:31:15.883] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:31:18.554] fs.protected_hardlinks = 1 [2025-09-24 12:31:18.554] fs.protected_symlinks = 1 [2025-09-24 12:31:18.569] kernel.modules_disabled = 1 [2025-09-24 12:31:18.761] [2025-09-24 12:31:18.761] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:31:19.902] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:31:27.593] SBL1:1210.0.1.0 [2025-09-24 12:31:27.641] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:31:29.207] SBL2:1210.0.1.0 [2025-09-24 12:31:29.256] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:31:29.351] j-A [2025-09-24 12:31:36.706] The R5 Autosar Classic is running [2025-09-24 12:31:36.728] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:31:36.728] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:31:37.336] INIT: version 2.96 booting [2025-09-24 12:31:37.447] INIT: Entering runlevel: 5 [2025-09-24 12:31:37.591] mtd28 attached [2025-09-24 12:31:37.607] mtd24 attached [2025-09-24 12:31:37.623] mtd32 attached [2025-09-24 12:31:37.639] ubi0:animations is mounted. [2025-09-24 12:31:37.725] RTNETLINK answers: File exists [2025-09-24 12:31:37.725] ubi1:textures is mounted. [2025-09-24 12:31:37.725] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:31:37.725] ubi2:dml_code is mounted. [2025-09-24 12:31:37.725] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:31:37.725] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:31:37.725] data.LB_FadeInType0=100 [2025-09-24 12:31:37.725] data.CHLH_FadeInType0=0 [2025-09-24 12:31:37.725] data.WU_FadeInDelay=0 [2025-09-24 12:31:37.725] max_time_out=0 [2025-09-24 12:31:37.725] No splash screen [2025-09-24 12:31:37.725] stop dss Done [2025-09-24 12:31:37.725] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:31:37.725] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:31:37.808] /dev/mem opened. [2025-09-24 12:31:37.808] Memory mapped at address 0xffffb9144000. [2025-09-24 12:31:37.808] Read at address 0x00600018 (0xffffb9144018): 0x00000000 [2025-09-24 12:31:37.808] Write at address 0x00600018 (0xffffb9144018): 0x00400040, readback 0x00400040 [2025-09-24 12:31:37.808] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:31:37.808] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:31:37.920] Loaded PowerVR consumer services. [2025-09-24 12:31:38.058] 512+0 records in [2025-09-24 12:31:38.058] 512+0 records out [2025-09-24 12:31:38.058] Waiting data available... [2025-09-24 12:31:38.074] Starting syslogd/klogd: done [2025-09-24 12:31:38.090] DML Start [2025-09-24 12:31:38.281] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:31:38.505] DML res1: 0 [2025-09-24 12:31:38.966] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:31:38.966] Read Success [2025-09-24 12:31:38.966] Verifying certificate... [2025-09-24 12:31:39.206] Verified OK [2025-09-24 12:31:39.222] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:31:40.882] Verified OK [2025-09-24 12:31:40.882] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:31:41.548] Verified OK [2025-09-24 12:31:41.548] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:31:44.171] fs.protected_hardlinks = 1 [2025-09-24 12:31:44.187] fs.protected_symlinks = 1 [2025-09-24 12:31:44.187] kernel.modules_disabled = 1 [2025-09-24 12:31:44.379] [2025-09-24 12:31:44.379] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:31:45.577] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:31:53.322] SBL1:1210.0.1.0 [2025-09-24 12:31:53.370] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:31:54.936] SBL2:1210.0.1.0 [2025-09-24 12:31:54.968] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:31:55.081] j-A [2025-09-24 12:32:02.454] The R5 Autosar Classic is running [2025-09-24 12:32:02.454] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:32:02.454] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:32:03.061] INIT: version 2.96 booting [2025-09-24 12:32:03.172] INIT: Entering runlevel: 5 [2025-09-24 12:32:03.317] mtd24 attached [2025-09-24 12:32:03.333] mtd28 attached [2025-09-24 12:32:03.349] mtd32 attached [2025-09-24 12:32:03.397] RTNETLINK answers: File exists [2025-09-24 12:32:03.397] ubi0:textures is mounted. [2025-09-24 12:32:03.451] ubi1:animations is mounted. [2025-09-24 12:32:03.451] ubi2:dml_code is mounted. [2025-09-24 12:32:03.451] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:32:03.451] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:32:03.451] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:32:03.451] data.LB_FadeInType0=100 [2025-09-24 12:32:03.451] data.CHLH_FadeInType0=0 [2025-09-24 12:32:03.451] data.WU_FadeInDelay=0 [2025-09-24 12:32:03.451] max_time_out=0 [2025-09-24 12:32:03.451] No splash screen [2025-09-24 12:32:03.451] stop dss Done [2025-09-24 12:32:03.451] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:32:03.451] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:32:03.527] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:32:03.527] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:32:03.527] /dev/mem opened. [2025-09-24 12:32:03.527] Memory mapped at address 0xffffba296000. [2025-09-24 12:32:03.527] Read at address 0x00600018 (0xffffba296018): 0x00000000 [2025-09-24 12:32:03.527] Write at address 0x00600018 (0xffffba296018): 0x00400040, readback 0x00400040 [2025-09-24 12:32:03.656] Loaded PowerVR consumer services. [2025-09-24 12:32:03.767] Waiting data available... [2025-09-24 12:32:03.783] 512+0 records in [2025-09-24 12:32:03.783] 512+0 records out [2025-09-24 12:32:03.831] Starting syslogd/klogd: done [2025-09-24 12:32:03.847] DML Start [2025-09-24 12:32:04.023] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:32:04.247] DML res1: 0 [2025-09-24 12:32:04.695] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:32:04.715] Read Success [2025-09-24 12:32:04.716] Verifying certificate... [2025-09-24 12:32:04.940] Verified OK [2025-09-24 12:32:04.956] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:32:06.658] Verified OK [2025-09-24 12:32:06.658] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:32:07.254] Verified OK [2025-09-24 12:32:07.254] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:32:09.781] fs.protected_hardlinks = 1 [2025-09-24 12:32:09.797] fs.protected_symlinks = 1 [2025-09-24 12:32:09.797] kernel.modules_disabled = 1 [2025-09-24 12:32:09.989] [2025-09-24 12:32:09.989] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:32:11.311] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:32:19.058] SBL1:1210.0.1.0 [2025-09-24 12:32:19.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:32:20.674] SBL2:1210.0.1.0 [2025-09-24 12:32:20.706] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:32:20.818] j-A [2025-09-24 12:32:28.156] The R5 Autosar Classic is running [2025-09-24 12:32:28.182] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:32:28.182] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:32:28.790] INIT: version 2.96 booting [2025-09-24 12:32:28.901] INIT: Entering runlevel: 5 [2025-09-24 12:32:29.062] mtd32 attached [2025-09-24 12:32:29.062] mtd24 attached [2025-09-24 12:32:29.078] mtd28 attached [2025-09-24 12:32:29.125] RTNETLINK answers: File exists [2025-09-24 12:32:29.141] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:32:29.141] ubi0:dml_code is mounted. [2025-09-24 12:32:29.175] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:32:29.175] ubi1:textures is mounted. [2025-09-24 12:32:29.175] ubi2:animations is mounted. [2025-09-24 12:32:29.175] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:32:29.175] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:32:29.175] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:32:29.198] data.LB_FadeInType0=100 [2025-09-24 12:32:29.198] data.CHLH_FadeInType0=0 [2025-09-24 12:32:29.198] data.WU_FadeInDelay=0 [2025-09-24 12:32:29.198] max_time_out=0 [2025-09-24 12:32:29.198] No splash screen [2025-09-24 12:32:29.198] stop dss Done [2025-09-24 12:32:29.259] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:32:29.259] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:32:29.259] /dev/mem opened. [2025-09-24 12:32:29.259] Memory mapped at address 0xffffb89f8000. [2025-09-24 12:32:29.285] Read at address 0x00600018 (0xffffb89f8018): 0x00000000 [2025-09-24 12:32:29.285] Write at address 0x00600018 (0xffffb89f8018): 0x00400040, readback 0x00400040 [2025-09-24 12:32:29.381] Loaded PowerVR consumer services. [2025-09-24 12:32:29.509] 512+0 records in [2025-09-24 12:32:29.509] 512+0 records out [2025-09-24 12:32:29.525] Waiting data available... [2025-09-24 12:32:29.541] Starting syslogd/klogd: done [2025-09-24 12:32:29.557] DML Start [2025-09-24 12:32:29.733] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:32:29.956] DML res1: 0 [2025-09-24 12:32:30.404] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:32:30.420] Read Success [2025-09-24 12:32:30.420] Verifying certificate... [2025-09-24 12:32:30.644] Verified OK [2025-09-24 12:32:30.660] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:32:32.226] Verified OK [2025-09-24 12:32:32.226] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:32:32.913] Verified OK [2025-09-24 12:32:32.913] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:32:35.600] fs.protected_hardlinks = 1 [2025-09-24 12:32:35.600] fs.protected_symlinks = 1 [2025-09-24 12:32:35.615] kernel.modules_disabled = 1 [2025-09-24 12:32:35.824] [2025-09-24 12:32:35.824] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:32:37.050] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:32:44.761] SBL1:1210.0.1.0 [2025-09-24 12:32:44.808] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:32:46.376] SBL2:1210.0.1.0 [2025-09-24 12:32:46.407] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:32:46.519] j-A [2025-09-24 12:32:53.874] The R5 Autosar Classic is running [2025-09-24 12:32:53.874] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:32:53.896] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:32:54.503] INIT: version 2.96 booting [2025-09-24 12:32:54.614] INIT: Entering runlevel: 5 [2025-09-24 12:32:54.775] mtd24 attached [2025-09-24 12:32:54.775] mtd28 attached [2025-09-24 12:32:54.791] mtd32 attached [2025-09-24 12:32:54.823] ubi0:textures is mounted. [2025-09-24 12:32:54.838] RTNETLINK answers: File exists [2025-09-24 12:32:54.898] ubi1:animations is mounted. [2025-09-24 12:32:54.898] ubi2:dml_code is mounted. [2025-09-24 12:32:54.898] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:32:54.898] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:32:54.898] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:32:54.898] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:32:54.898] data.LB_FadeInType0=100 [2025-09-24 12:32:54.898] data.CHLH_FadeInType0=0 [2025-09-24 12:32:54.898] data.WU_FadeInDelay=0 [2025-09-24 12:32:54.898] max_time_out=0 [2025-09-24 12:32:54.898] No splash screen [2025-09-24 12:32:54.898] stop dss Done [2025-09-24 12:32:54.898] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:32:54.946] /dev/mem opened. [2025-09-24 12:32:54.978] Memory mapped at address 0xffffbd7b0000. [2025-09-24 12:32:54.978] Read at address 0x00600018 (0xffffbd7b0018): 0x00000000 [2025-09-24 12:32:54.978] Write at address 0x00600018 (0xffffbd7b0018): 0x00400040, readback 0x00400040 [2025-09-24 12:32:55.026] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:32:55.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:32:55.186] Loaded PowerVR consumer services. [2025-09-24 12:32:55.234] 512+0 records in [2025-09-24 12:32:55.234] 512+0 records out [2025-09-24 12:32:55.250] Waiting data available... [2025-09-24 12:32:55.267] Starting syslogd/klogd: done [2025-09-24 12:32:55.282] DML Start [2025-09-24 12:32:55.458] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:32:55.666] DML res1: 0 [2025-09-24 12:32:56.122] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:32:56.122] Read Success [2025-09-24 12:32:56.122] Verifying certificate... [2025-09-24 12:32:56.395] Verified OK [2025-09-24 12:32:56.410] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:32:57.993] Verified OK [2025-09-24 12:32:57.993] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:32:58.632] Verified OK [2025-09-24 12:32:58.632] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:33:01.334] fs.protected_hardlinks = 1 [2025-09-24 12:33:01.334] fs.protected_symlinks = 1 [2025-09-24 12:33:01.350] kernel.modules_disabled = 1 [2025-09-24 12:33:01.542] [2025-09-24 12:33:01.542] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:33:02.773] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:33:10.482] SBL1:1210.0.1.0 [2025-09-24 12:33:10.530] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:33:12.097] SBL2:1210.0.1.0 [2025-09-24 12:33:12.145] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:33:12.241] j-A [2025-09-24 12:33:19.596] The R5 Autosar Classic is running [2025-09-24 12:33:19.618] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:33:19.618] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:33:20.226] INIT: version 2.96 booting [2025-09-24 12:33:20.338] INIT: Entering runlevel: 5 [2025-09-24 12:33:20.499] mtd24 attached [2025-09-24 12:33:20.514] mtd32 attached [2025-09-24 12:33:20.530] mtd28 attached [2025-09-24 12:33:20.546] ubi0:textures is mounted. [2025-09-24 12:33:20.631] RTNETLINK answers: File exists [2025-09-24 12:33:20.631] ubi1:dml_code is mounted. [2025-09-24 12:33:20.631] ubi2:animations is mounted. [2025-09-24 12:33:20.631] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:33:20.631] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:33:20.631] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:33:20.631] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:33:20.631] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:33:20.631] data.LB_FadeInType0=100 [2025-09-24 12:33:20.631] data.CHLH_FadeInType0=0 [2025-09-24 12:33:20.631] data.WU_FadeInDelay=0 [2025-09-24 12:33:20.631] max_time_out=0 [2025-09-24 12:33:20.631] No splash screen [2025-09-24 12:33:20.631] stop dss Done [2025-09-24 12:33:20.679] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:33:20.719] /dev/mem opened. [2025-09-24 12:33:20.719] Memory mapped at address 0xffff9d56f000. [2025-09-24 12:33:20.719] Read at address 0x00600018 (0xffff9d56f018): 0x00000000 [2025-09-24 12:33:20.719] Write at address 0x00600018 (0xffff9d56f018): 0x00400040, readback 0x00400040 [2025-09-24 12:33:20.719] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:33:20.830] Loaded PowerVR consumer services. [2025-09-24 12:33:20.973] Waiting data available... [2025-09-24 12:33:20.973] 512+0 records in [2025-09-24 12:33:20.973] 512+0 records out [2025-09-24 12:33:21.021] Starting syslogd/klogd: done [2025-09-24 12:33:21.037] DML Start [2025-09-24 12:33:21.213] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:33:21.469] DML res1: 0 [2025-09-24 12:33:21.833] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:33:21.833] Read Success [2025-09-24 12:33:21.833] Verifying certificate... [2025-09-24 12:33:22.056] Verified OK [2025-09-24 12:33:22.072] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:33:23.656] Verified OK [2025-09-24 12:33:23.656] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:33:24.279] Verified OK [2025-09-24 12:33:24.279] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:33:26.869] fs.protected_hardlinks = 1 [2025-09-24 12:33:26.869] fs.protected_symlinks = 1 [2025-09-24 12:33:26.885] kernel.modules_disabled = 1 [2025-09-24 12:33:27.077] [2025-09-24 12:33:27.077] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:33:28.541] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:33:36.210] SBL1:1210.0.1.0 [2025-09-24 12:33:36.258] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:33:37.825] SBL2:1210.0.1.0 [2025-09-24 12:33:37.857] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:33:37.968] j-A [2025-09-24 12:33:45.344] The R5 Autosar Classic is running [2025-09-24 12:33:45.344] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:33:45.344] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:33:45.952] INIT: version 2.96 booting [2025-09-24 12:33:46.047] INIT: Entering runlevel: 5 [2025-09-24 12:33:46.207] mtd32 attached [2025-09-24 12:33:46.224] mtd28 attached [2025-09-24 12:33:46.224] mtd24 attached [2025-09-24 12:33:46.346] RTNETLINK answers: File exists [2025-09-24 12:33:46.346] ubi0:dml_code is mounted. [2025-09-24 12:33:46.346] ubi2:textures is mounted. [2025-09-24 12:33:46.346] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:33:46.346] ubi1:animations is mounted. [2025-09-24 12:33:46.346] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:33:46.346] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:33:46.346] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:33:46.346] data.LB_FadeInType0=100 [2025-09-24 12:33:46.346] data.CHLH_FadeInType0=0 [2025-09-24 12:33:46.346] data.WU_FadeInDelay=0 [2025-09-24 12:33:46.346] max_time_out=0 [2025-09-24 12:33:46.346] No splash screen [2025-09-24 12:33:46.346] stop dss Done [2025-09-24 12:33:46.346] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:33:46.443] /dev/mem opened. [2025-09-24 12:33:46.443] Memory mapped at address 0xffff98917000. [2025-09-24 12:33:46.443] Read at address 0x00600018 (0xffff98917018): 0x00000000 [2025-09-24 12:33:46.443] Write at address 0x00600018 (0xffff98917018): 0x00400040, readback 0x00400040 [2025-09-24 12:33:46.443] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:33:46.443] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:33:46.619] Loaded PowerVR consumer services. [2025-09-24 12:33:46.652] 512+0 records in [2025-09-24 12:33:46.652] 512+0 records out [2025-09-24 12:33:46.716] Starting syslogd/klogd: Waiting data available... [2025-09-24 12:33:46.716] done [2025-09-24 12:33:46.731] DML Start [2025-09-24 12:33:46.907] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:33:47.115] DML res1: 0 [2025-09-24 12:33:47.611] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:33:47.626] Read Success [2025-09-24 12:33:47.626] Verifying certificate... [2025-09-24 12:33:47.867] Verified OK [2025-09-24 12:33:47.883] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:33:49.559] Verified OK [2025-09-24 12:33:49.559] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:33:50.182] Verified OK [2025-09-24 12:33:50.182] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:33:52.804] fs.protected_hardlinks = 1 [2025-09-24 12:33:52.804] fs.protected_symlinks = 1 [2025-09-24 12:33:52.820] kernel.modules_disabled = 1 [2025-09-24 12:33:53.011] [2025-09-24 12:33:53.011] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:33:54.225] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:34:01.930] SBL1:1210.0.1.0 [2025-09-24 12:34:01.978] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:34:03.544] SBL2:1210.0.1.0 [2025-09-24 12:34:03.593] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:34:03.688] j-A [2025-09-24 12:34:11.043] The R5 Autosar Classic is running [2025-09-24 12:34:11.067] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:34:11.067] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:34:11.674] INIT: version 2.96 booting [2025-09-24 12:34:11.786] INIT: Entering runlevel: 5 [2025-09-24 12:34:11.930] mtd24 attached [2025-09-24 12:34:11.946] mtd32 attached [2025-09-24 12:34:11.962] mtd28 attached [2025-09-24 12:34:12.041] RTNETLINK answers: File exists [2025-09-24 12:34:12.041] ubi0:textures is mounted. [2025-09-24 12:34:12.041] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:34:12.041] ubi2:animations is mounted. [2025-09-24 12:34:12.041] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:34:12.041] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:34:12.041] ubi1:dml_code is mounted. [2025-09-24 12:34:12.041] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:34:12.041] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:34:12.071] data.LB_FadeInType0=100 [2025-09-24 12:34:12.071] data.CHLH_FadeInType0=0 [2025-09-24 12:34:12.071] data.WU_FadeInDelay=0 [2025-09-24 12:34:12.071] max_time_out=0 [2025-09-24 12:34:12.071] No splash screen [2025-09-24 12:34:12.071] stop dss Done [2025-09-24 12:34:12.115] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:34:12.115] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:34:12.131] /dev/mem opened. [2025-09-24 12:34:12.131] Memory mapped at address 0xffff98e1b000. [2025-09-24 12:34:12.157] Read at address 0x00600018 (0xffff98e1b018): 0x00000000 [2025-09-24 12:34:12.157] Write at address 0x00600018 (0xffff98e1b018): 0x00400040, readback 0x00400040 [2025-09-24 12:34:12.285] Loaded PowerVR consumer services. [2025-09-24 12:34:12.381] 512+0 records in [2025-09-24 12:34:12.381] 512+0 records out [2025-09-24 12:34:12.413] Waiting data available... [2025-09-24 12:34:12.429] Starting syslogd/klogd: done [2025-09-24 12:34:12.444] DML Start [2025-09-24 12:34:12.605] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:34:12.812] DML res1: 0 [2025-09-24 12:34:13.308] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:34:13.329] Read Success [2025-09-24 12:34:13.329] Verifying certificate... [2025-09-24 12:34:13.553] Verified OK [2025-09-24 12:34:13.569] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:34:15.280] Verified OK [2025-09-24 12:34:15.280] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:34:15.884] Verified OK [2025-09-24 12:34:15.884] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:34:18.361] fs.protected_hardlinks = 1 [2025-09-24 12:34:18.361] fs.protected_symlinks = 1 [2025-09-24 12:34:18.361] kernel.modules_disabled = 1 [2025-09-24 12:34:18.537] [2025-09-24 12:34:18.537] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:34:19.951] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:34:27.658] SBL1:1210.0.1.0 [2025-09-24 12:34:27.706] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:34:29.272] SBL2:1210.0.1.0 [2025-09-24 12:34:29.320] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:34:29.417] j-A [2025-09-24 12:34:36.772] The R5 Autosar Classic is running [2025-09-24 12:34:36.795] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:34:36.795] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:34:37.402] INIT: version 2.96 booting [2025-09-24 12:34:37.514] INIT: Entering runlevel: 5 [2025-09-24 12:34:37.673] mtd28 attached [2025-09-24 12:34:37.673] mtd24 attached [2025-09-24 12:34:37.689] mtd32 attached [2025-09-24 12:34:37.796] RTNETLINK answers: File exists [2025-09-24 12:34:37.796] ubi0:animations is mounted. [2025-09-24 12:34:37.796] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:34:37.796] ubi1:textures is mounted. [2025-09-24 12:34:37.796] ubi2:dml_code is mounted. [2025-09-24 12:34:37.796] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:34:37.796] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:34:37.796] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:34:37.796] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:34:37.796] data.LB_FadeInType0=100 [2025-09-24 12:34:37.796] data.CHLH_FadeInType0=0 [2025-09-24 12:34:37.796] data.WU_FadeInDelay=0 [2025-09-24 12:34:37.796] max_time_out=0 [2025-09-24 12:34:37.796] No splash screen [2025-09-24 12:34:37.796] stop dss Done [2025-09-24 12:34:37.883] /dev/mem opened. [2025-09-24 12:34:37.883] Memory mapped at address 0xffff7f796000. [2025-09-24 12:34:37.883] Read at address 0x00600018 (0xffff7f796018): 0x00000000 [2025-09-24 12:34:37.883] Write at address 0x00600018 (0xffff7f796018): 0x00400040, readback 0x00400040 [2025-09-24 12:34:37.883] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:34:37.883] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:34:37.994] Loaded PowerVR consumer services. [2025-09-24 12:34:38.106] Waiting data available... [2025-09-24 12:34:38.122] 512+0 records in [2025-09-24 12:34:38.122] 512+0 records out [2025-09-24 12:34:38.154] Starting syslogd/klogd: done [2025-09-24 12:34:38.186] DML Start [2025-09-24 12:34:38.330] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:34:38.586] DML res1: 0 [2025-09-24 12:34:39.002] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:34:39.002] Read Success [2025-09-24 12:34:39.018] Verifying certificate... [2025-09-24 12:34:39.241] Verified OK [2025-09-24 12:34:39.257] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:34:40.835] Verified OK [2025-09-24 12:34:40.835] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:34:41.465] Verified OK [2025-09-24 12:34:41.465] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:34:44.040] fs.protected_hardlinks = 1 [2025-09-24 12:34:44.056] fs.protected_symlinks = 1 [2025-09-24 12:34:44.056] kernel.modules_disabled = 1 [2025-09-24 12:34:44.231] [2025-09-24 12:34:44.231] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:34:45.685] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:34:53.394] SBL1:1210.0.1.0 [2025-09-24 12:34:53.425] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:34:55.008] SBL2:1210.0.1.0 [2025-09-24 12:34:55.040] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:34:55.152] j-A [2025-09-24 12:35:02.490] The R5 Autosar Classic is running [2025-09-24 12:35:02.515] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:35:02.515] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:35:03.123] INIT: version 2.96 booting [2025-09-24 12:35:03.235] INIT: Entering runlevel: 5 [2025-09-24 12:35:03.395] mtd24 attached [2025-09-24 12:35:03.411] mtd28 attached [2025-09-24 12:35:03.411] mtd32 attached [2025-09-24 12:35:03.459] ubi0:textures is mounted. [2025-09-24 12:35:03.459] RTNETLINK answers: File exists [2025-09-24 12:35:03.510] ubi1:animations is mounted. [2025-09-24 12:35:03.510] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:35:03.510] ubi2:dml_code is mounted. [2025-09-24 12:35:03.510] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:35:03.510] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:35:03.510] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:35:03.510] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:35:03.510] data.LB_FadeInType0=100 [2025-09-24 12:35:03.510] data.CHLH_FadeInType0=0 [2025-09-24 12:35:03.531] data.WU_FadeInDelay=0 [2025-09-24 12:35:03.531] max_time_out=0 [2025-09-24 12:35:03.531] No splash screen [2025-09-24 12:35:03.531] stop dss Done [2025-09-24 12:35:03.560] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:35:03.560] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:35:03.575] /dev/mem opened. [2025-09-24 12:35:03.575] Memory mapped at address 0xffffa1ae0000. [2025-09-24 12:35:03.601] Read at address 0x00600018 (0xffffa1ae0018): 0x00000000 [2025-09-24 12:35:03.601] Write at address 0x00600018 (0xffffa1ae0018): 0x00400040, readback 0x00400040 [2025-09-24 12:35:03.697] Loaded PowerVR consumer services. [2025-09-24 12:35:03.853] Waiting data available... [2025-09-24 12:35:03.853] 512+0 records in [2025-09-24 12:35:03.853] 512+0 records out [2025-09-24 12:35:03.885] Starting syslogd/klogd: done [2025-09-24 12:35:03.901] DML Start [2025-09-24 12:35:04.060] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:35:04.285] DML res1: 0 [2025-09-24 12:35:04.760] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:35:04.760] Read Success [2025-09-24 12:35:04.760] Verifying certificate... [2025-09-24 12:35:05.000] Verified OK [2025-09-24 12:35:05.016] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:35:06.500] Verified OK [2025-09-24 12:35:06.500] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:35:07.156] Verified OK [2025-09-24 12:35:07.156] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:35:09.856] fs.protected_hardlinks = 1 [2025-09-24 12:35:09.856] fs.protected_symlinks = 1 [2025-09-24 12:35:09.856] kernel.modules_disabled = 1 [2025-09-24 12:35:10.032] [2025-09-24 12:35:10.032] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:35:11.391] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:35:19.152] SBL1:1210.0.1.0 [2025-09-24 12:35:19.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:35:20.766] SBL2:1210.0.1.0 [2025-09-24 12:35:20.798] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:35:20.910] j-A [2025-09-24 12:35:28.265] The R5 Autosar Classic is running [2025-09-24 12:35:28.265] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:35:28.285] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:35:28.893] INIT: version 2.96 booting [2025-09-24 12:35:29.005] INIT: Entering runlevel: 5 [2025-09-24 12:35:29.148] mtd24 attached [2025-09-24 12:35:29.164] mtd28 attached [2025-09-24 12:35:29.181] mtd32 attached [2025-09-24 12:35:29.212] ubi0:textures is mounted. [2025-09-24 12:35:29.229] RTNETLINK answers: File exists [2025-09-24 12:35:29.284] ubi1:animations is mounted. [2025-09-24 12:35:29.284] ubi2:dml_code is mounted. [2025-09-24 12:35:29.284] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:35:29.284] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:35:29.284] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:35:29.284] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:35:29.284] data.LB_FadeInType0=100 [2025-09-24 12:35:29.284] data.CHLH_FadeInType0=0 [2025-09-24 12:35:29.284] data.WU_FadeInDelay=0 [2025-09-24 12:35:29.284] max_time_out=0 [2025-09-24 12:35:29.284] No splash screen [2025-09-24 12:35:29.284] stop dss Done [2025-09-24 12:35:29.284] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:35:29.331] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:35:29.331] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:35:29.369] /dev/mem opened. [2025-09-24 12:35:29.369] Memory mapped at address 0xffffadb05000. [2025-09-24 12:35:29.369] Read at address 0x00600018 (0xffffadb05018): 0x00000000 [2025-09-24 12:35:29.369] Write at address 0x00600018 (0xffffadb05018): 0x00400040, readback 0x00400040 [2025-09-24 12:35:29.577] Loaded PowerVR consumer services. [2025-09-24 12:35:29.593] 512+0 records in [2025-09-24 12:35:29.593] 512+0 records out [2025-09-24 12:35:29.625] Waiting data available... [2025-09-24 12:35:29.657] Starting syslogd/klogd: done [2025-09-24 12:35:29.673] DML Start [2025-09-24 12:35:29.817] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:35:30.057] DML res1: 0 [2025-09-24 12:35:30.563] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:35:30.563] Read Success [2025-09-24 12:35:30.563] Verifying certificate... [2025-09-24 12:35:30.788] Verified OK [2025-09-24 12:35:30.803] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:35:32.512] Verified OK [2025-09-24 12:35:32.512] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:35:33.148] Verified OK [2025-09-24 12:35:33.148] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:35:35.787] fs.protected_hardlinks = 1 [2025-09-24 12:35:35.787] fs.protected_symlinks = 1 [2025-09-24 12:35:35.803] kernel.modules_disabled = 1 [2025-09-24 12:35:35.979] [2025-09-24 12:35:35.979] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:35:37.160] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:35:44.881] SBL1:1210.0.1.0 [2025-09-24 12:35:44.913] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:35:46.495] SBL2:1210.0.1.0 [2025-09-24 12:35:46.527] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:35:46.639] j-A [2025-09-24 12:35:53.977] The R5 Autosar Classic is running [2025-09-24 12:35:54.007] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:35:54.007] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:35:54.615] INIT: version 2.96 booting [2025-09-24 12:35:54.727] INIT: Entering runlevel: 5 [2025-09-24 12:35:54.887] mtd24 attached [2025-09-24 12:35:54.887] mtd28 attached [2025-09-24 12:35:54.903] mtd32 attached [2025-09-24 12:35:54.919] ubi0:textures is mounted. [2025-09-24 12:35:55.016] ubi1:animations is mounted. [2025-09-24 12:35:55.016] RTNETLINK answers: File exists [2025-09-24 12:35:55.016] ubi2:dml_code is mounted. [2025-09-24 12:35:55.016] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:35:55.016] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:35:55.016] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:35:55.016] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:35:55.016] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:35:55.016] data.LB_FadeInType0=100 [2025-09-24 12:35:55.016] data.CHLH_FadeInType0=0 [2025-09-24 12:35:55.016] data.WU_FadeInDelay=0 [2025-09-24 12:35:55.016] max_time_out=0 [2025-09-24 12:35:55.016] No splash screen [2025-09-24 12:35:55.016] stop dss Done [2025-09-24 12:35:55.094] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:35:55.094] /dev/mem opened. [2025-09-24 12:35:55.094] Memory mapped at address 0xffff95634000. [2025-09-24 12:35:55.094] Read at address 0x00600018 (0xffff95634018): 0x00000000 [2025-09-24 12:35:55.094] Write at address 0x00600018 (0xffff95634018): 0x00400040, readback 0x00400040 [2025-09-24 12:35:55.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:35:55.254] Loaded PowerVR consumer services. [2025-09-24 12:35:55.334] 512+0 records in [2025-09-24 12:35:55.334] 512+0 records out [2025-09-24 12:35:55.366] Starting syslogd/klogd: done [2025-09-24 12:35:55.382] Waiting data available... [2025-09-24 12:35:55.382] DML Start [2025-09-24 12:35:55.557] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:35:55.765] DML res1: 0 [2025-09-24 12:35:56.229] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:35:56.245] Read Success [2025-09-24 12:35:56.245] Verifying certificate... [2025-09-24 12:35:56.468] Verified OK [2025-09-24 12:35:56.484] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:35:58.201] Verified OK [2025-09-24 12:35:58.201] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:35:58.793] Verified OK [2025-09-24 12:35:58.809] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:36:01.415] fs.protected_hardlinks = 1 [2025-09-24 12:36:01.415] fs.protected_symlinks = 1 [2025-09-24 12:36:01.415] kernel.modules_disabled = 1 [2025-09-24 12:36:01.607] [2025-09-24 12:36:01.607] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:36:02.879] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:36:10.609] SBL1:1210.0.1.0 [2025-09-24 12:36:10.641] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:36:12.224] SBL2:1210.0.1.0 [2025-09-24 12:36:12.256] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:36:12.369] j-A [2025-09-24 12:36:19.706] The R5 Autosar Classic is running [2025-09-24 12:36:19.731] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:36:19.731] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:36:20.339] INIT: version 2.96 booting [2025-09-24 12:36:20.451] INIT: Entering runlevel: 5 [2025-09-24 12:36:20.610] mtd32 attached [2025-09-24 12:36:20.610] mtd28 attached [2025-09-24 12:36:20.626] mtd24 attached [2025-09-24 12:36:20.658] ubi0:dml_code is mounted. [2025-09-24 12:36:20.674] RTNETLINK answers: File exists [2025-09-24 12:36:20.734] ubi1:animations is mounted. [2025-09-24 12:36:20.734] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:36:20.734] ubi2:textures is mounted. [2025-09-24 12:36:20.734] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:36:20.734] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:36:20.734] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:36:20.734] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:36:20.734] data.LB_FadeInType0=100 [2025-09-24 12:36:20.734] data.CHLH_FadeInType0=0 [2025-09-24 12:36:20.734] data.WU_FadeInDelay=0 [2025-09-24 12:36:20.734] max_time_out=0 [2025-09-24 12:36:20.734] No splash screen [2025-09-24 12:36:20.734] stop dss Done [2025-09-24 12:36:20.783] /dev/mem opened. [2025-09-24 12:36:20.783] Memory mapped at address 0xffff89e5f000. [2025-09-24 12:36:20.818] Read at address 0x00600018 (0xffff89e5f018): 0x00000000 [2025-09-24 12:36:20.818] Write at address 0x00600018 (0xffff89e5f018): 0x00400040, readback 0x00400040 [2025-09-24 12:36:20.818] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:36:20.818] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:36:21.026] Loaded PowerVR consumer services. [2025-09-24 12:36:21.082] 512+0 records in [2025-09-24 12:36:21.082] 512+0 records out [2025-09-24 12:36:21.082] Waiting data available... [2025-09-24 12:36:21.114] Starting syslogd/klogd: done [2025-09-24 12:36:21.130] DML Start [2025-09-24 12:36:21.306] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:36:21.530] DML res1: 0 [2025-09-24 12:36:21.993] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:36:21.993] Read Success [2025-09-24 12:36:21.993] Verifying certificate... [2025-09-24 12:36:22.248] Verified OK [2025-09-24 12:36:22.264] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:36:23.941] Verified OK [2025-09-24 12:36:23.941] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:36:24.595] Verified OK [2025-09-24 12:36:24.595] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:36:27.297] fs.protected_hardlinks = 1 [2025-09-24 12:36:27.313] fs.protected_symlinks = 1 [2025-09-24 12:36:27.313] kernel.modules_disabled = 1 [2025-09-24 12:36:27.521] [2025-09-24 12:36:27.521] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:36:28.641] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:36:36.326] SBL1:1210.0.1.0 [2025-09-24 12:36:36.374] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:36:37.940] SBL2:1210.0.1.0 [2025-09-24 12:36:37.988] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:36:38.084] j-A [2025-09-24 12:36:45.439] The R5 Autosar Classic is running [2025-09-24 12:36:45.464] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:36:45.464] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:36:46.071] INIT: version 2.96 booting [2025-09-24 12:36:46.183] INIT: Entering runlevel: 5 [2025-09-24 12:36:46.343] mtd24 attached [2025-09-24 12:36:46.343] mtd28 attached [2025-09-24 12:36:46.359] mtd32 attached [2025-09-24 12:36:46.407] ubi1:animations is mounted. [2025-09-24 12:36:46.476] RTNETLINK answers: File exists [2025-09-24 12:36:46.476] ubi2:dml_code is mounted. [2025-09-24 12:36:46.476] ubi0:textures is mounted. [2025-09-24 12:36:46.476] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:36:46.476] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:36:46.476] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:36:46.476] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:36:46.476] data.LB_FadeInType0=100 [2025-09-24 12:36:46.476] data.CHLH_FadeInType0=0 [2025-09-24 12:36:46.476] data.WU_FadeInDelay=0 [2025-09-24 12:36:46.476] max_time_out=0 [2025-09-24 12:36:46.476] No splash screen [2025-09-24 12:36:46.476] stop dss Done [2025-09-24 12:36:46.476] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:36:46.547] /dev/mem opened. [2025-09-24 12:36:46.547] Memory mapped at address 0xffffa82ba000. [2025-09-24 12:36:46.547] Read at address 0x00600018 (0xffffa82ba018): 0x00000000 [2025-09-24 12:36:46.547] Write at address 0x00600018 (0xffffa82ba018): 0x00400040, readback 0x00400040 [2025-09-24 12:36:46.563] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:36:46.587] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:36:46.651] Loaded PowerVR consumer services. [2025-09-24 12:36:46.778] Waiting data available... [2025-09-24 12:36:46.794] 512+0 records in [2025-09-24 12:36:46.794] 512+0 records out [2025-09-24 12:36:46.826] Starting syslogd/klogd: done [2025-09-24 12:36:46.842] DML Start [2025-09-24 12:36:47.018] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:36:47.227] DML res1: 0 [2025-09-24 12:36:47.731] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:36:47.731] Read Success [2025-09-24 12:36:47.731] Verifying certificate... [2025-09-24 12:36:47.955] Verified OK [2025-09-24 12:36:47.970] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:36:49.704] Verified OK [2025-09-24 12:36:49.704] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:36:50.253] Verified OK [2025-09-24 12:36:50.253] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:36:52.763] fs.protected_hardlinks = 1 [2025-09-24 12:36:52.763] fs.protected_symlinks = 1 [2025-09-24 12:36:52.779] kernel.modules_disabled = 1 [2025-09-24 12:36:52.972] [2025-09-24 12:36:52.972] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:36:54.343] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:37:02.053] SBL1:1210.0.1.0 [2025-09-24 12:37:02.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:37:03.667] SBL2:1210.0.1.0 [2025-09-24 12:37:03.715] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 12:37:03.812] j-A [2025-09-24 12:37:11.166] The R5 Autosar Classic is running [2025-09-24 12:37:11.189] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:37:11.189] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:37:11.797] INIT: version 2.96 booting [2025-09-24 12:37:11.908] INIT: Entering runlevel: 5 [2025-09-24 12:37:12.068] mtd24 attached [2025-09-24 12:37:12.068] mtd28 attached [2025-09-24 12:37:12.101] ubi0:textures is mounted. [2025-09-24 12:37:12.116] mtd32 attached [2025-09-24 12:37:12.116] ubi1:animations is mounted. [2025-09-24 12:37:12.133] RTNETLINK answers: File exists [2025-09-24 12:37:12.174] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:37:12.174] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:37:12.174] ubi2:dml_code is mounted. [2025-09-24 12:37:12.174] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:37:12.174] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:37:12.174] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:37:12.204] data.LB_FadeInType0=100 [2025-09-24 12:37:12.204] data.CHLH_FadeInType0=0 [2025-09-24 12:37:12.204] data.WU_FadeInDelay=0 [2025-09-24 12:37:12.204] max_time_out=0 [2025-09-24 12:37:12.204] No splash screen [2025-09-24 12:37:12.204] stop dss Done [2025-09-24 12:37:12.220] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:37:12.220] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:37:12.252] /dev/mem opened. [2025-09-24 12:37:12.252] Memory mapped at address 0xffff87d25000. [2025-09-24 12:37:12.278] Read at address 0x00600018 (0xffff87d25018): 0x00000000 [2025-09-24 12:37:12.278] Write at address 0x00600018 (0xffff87d25018): 0x00400040, readback 0x00400040 [2025-09-24 12:37:12.374] Loaded PowerVR consumer services. [2025-09-24 12:37:12.502] 512+0 records in [2025-09-24 12:37:12.502] 512+0 records out [2025-09-24 12:37:12.518] Waiting data available... [2025-09-24 12:37:12.549] Starting syslogd/klogd: done [2025-09-24 12:37:12.581] DML Start [2025-09-24 12:37:12.790] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:37:13.029] DML res1: 0 [2025-09-24 12:37:13.413] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:37:13.413] Read Success [2025-09-24 12:37:13.429] Verifying certificate... [2025-09-24 12:37:13.637] Verified OK [2025-09-24 12:37:13.653] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:37:15.256] Verified OK [2025-09-24 12:37:15.256] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:37:15.912] Verified OK [2025-09-24 12:37:15.912] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:37:18.646] fs.protected_hardlinks = 1 [2025-09-24 12:37:18.662] fs.protected_symlinks = 1 [2025-09-24 12:37:18.662] kernel.modules_disabled = 1 [2025-09-24 12:37:18.854] [2025-09-24 12:37:18.854] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:37:20.093] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:37:27.765] SBL1:1210.0.1.0 [2025-09-24 12:37:27.813] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:37:29.380] SBL2:1210.0.1.0 [2025-09-24 12:37:29.428] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:37:29.524] j-A [2025-09-24 12:37:36.879] The R5 Autosar Classic is running [2025-09-24 12:37:36.901] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:37:36.901] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:37:37.508] INIT: version 2.96 booting [2025-09-24 12:37:37.619] INIT: Entering runlevel: 5 [2025-09-24 12:37:37.779] mtd24 attached [2025-09-24 12:37:37.779] mtd28 attached [2025-09-24 12:37:37.796] mtd32 attached [2025-09-24 12:37:37.844] ubi0:textures is mounted. [2025-09-24 12:37:37.844] RTNETLINK answers: File exists [2025-09-24 12:37:37.910] ubi1:animations is mounted. [2025-09-24 12:37:37.910] ubi2:dml_code is mounted. [2025-09-24 12:37:37.910] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:37:37.910] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:37:37.910] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:37:37.910] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:37:37.910] data.LB_FadeInType0=100 [2025-09-24 12:37:37.910] data.CHLH_FadeInType0=0 [2025-09-24 12:37:37.910] data.WU_FadeInDelay=0 [2025-09-24 12:37:37.910] max_time_out=0 [2025-09-24 12:37:37.910] No splash screen [2025-09-24 12:37:37.910] stop dss Done [2025-09-24 12:37:37.910] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:37:37.958] /dev/mem opened. [2025-09-24 12:37:37.958] Memory mapped at address 0xffff8567b000. [2025-09-24 12:37:37.984] Read at address 0x00600018 (0xffff8567b018): 0x00000000 [2025-09-24 12:37:37.984] Write at address 0x00600018 (0xffff8567b018): 0x00400040, readback 0x00400040 [2025-09-24 12:37:37.984] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:37:37.984] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:37:38.079] Loaded PowerVR consumer services. [2025-09-24 12:37:38.207] Waiting data available... [2025-09-24 12:37:38.223] 512+0 records in [2025-09-24 12:37:38.223] 512+0 records out [2025-09-24 12:37:38.271] Starting syslogd/klogd: done [2025-09-24 12:37:38.287] DML Start [2025-09-24 12:37:38.447] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:37:38.671] DML res1: 0 [2025-09-24 12:37:39.165] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:37:39.165] Read Success [2025-09-24 12:37:39.165] Verifying certificate... [2025-09-24 12:37:39.421] Verified OK [2025-09-24 12:37:39.437] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:37:41.067] Verified OK [2025-09-24 12:37:41.067] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:37:41.686] Verified OK [2025-09-24 12:37:41.686] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:37:44.260] fs.protected_hardlinks = 1 [2025-09-24 12:37:44.276] fs.protected_symlinks = 1 [2025-09-24 12:37:44.276] kernel.modules_disabled = 1 [2025-09-24 12:37:44.467] [2025-09-24 12:37:44.467] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:37:45.727] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:37:53.489] SBL1:1210.0.1.0 [2025-09-24 12:37:53.521] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:37:55.103] SBL2:1210.0.1.0 [2025-09-24 12:37:55.136] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:37:55.248] j-A [2025-09-24 12:38:02.621] The R5 Autosar Classic is running [2025-09-24 12:38:02.621] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:38:02.621] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:38:03.229] INIT: version 2.96 booting [2025-09-24 12:38:03.340] INIT: Entering runlevel: 5 [2025-09-24 12:38:03.500] mtd28 attached [2025-09-24 12:38:03.516] mtd32 attached [2025-09-24 12:38:03.516] mtd24 attached [2025-09-24 12:38:03.564] ubi0:animations is mounted. [2025-09-24 12:38:03.564] RTNETLINK answers: File exists [2025-09-24 12:38:03.625] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:38:03.625] ubi1:dml_code is mounted. [2025-09-24 12:38:03.625] ubi2:textures is mounted. [2025-09-24 12:38:03.625] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:38:03.625] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:38:03.625] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:38:03.625] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:38:03.625] data.LB_FadeInType0=100 [2025-09-24 12:38:03.625] data.CHLH_FadeInType0=0 [2025-09-24 12:38:03.625] data.WU_FadeInDelay=0 [2025-09-24 12:38:03.625] max_time_out=0 [2025-09-24 12:38:03.625] No splash screen [2025-09-24 12:38:03.625] stop dss Done [2025-09-24 12:38:03.672] /dev/mem opened. [2025-09-24 12:38:03.719] Memory mapped at address 0xffffa1ccf000. [2025-09-24 12:38:03.719] Read at address 0x00600018 (0xffffa1ccf018): 0x00000000 [2025-09-24 12:38:03.719] Write at address 0x00600018 (0xffffa1ccf018): 0x00400040, readback 0x00400040 [2025-09-24 12:38:03.719] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:38:03.719] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:38:03.832] Loaded PowerVR consumer services. [2025-09-24 12:38:03.944] 512+0 records in [2025-09-24 12:38:03.944] 512+0 records out [2025-09-24 12:38:03.944] Waiting data available... [2025-09-24 12:38:03.992] Starting syslogd/klogd: done [2025-09-24 12:38:04.008] DML Start [2025-09-24 12:38:04.167] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:38:04.391] DML res1: 0 [2025-09-24 12:38:04.871] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:38:04.887] Read Success [2025-09-24 12:38:04.887] Verifying certificate... [2025-09-24 12:38:05.127] Verified OK [2025-09-24 12:38:05.143] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:38:06.869] Verified OK [2025-09-24 12:38:06.869] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:38:07.484] Verified OK [2025-09-24 12:38:07.484] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:38:10.058] fs.protected_hardlinks = 1 [2025-09-24 12:38:10.074] fs.protected_symlinks = 1 [2025-09-24 12:38:10.074] kernel.modules_disabled = 1 [2025-09-24 12:38:10.265] [2025-09-24 12:38:10.265] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:38:11.487] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:38:19.207] SBL1:1210.0.1.0 [2025-09-24 12:38:19.239] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:38:20.822] SBL2:1210.0.1.0 [2025-09-24 12:38:20.853] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:38:20.965] j-A [2025-09-24 12:38:28.337] The R5 Autosar Classic is running [2025-09-24 12:38:28.337] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:38:28.337] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:38:28.944] INIT: version 2.96 booting [2025-09-24 12:38:29.056] INIT: Entering runlevel: 5 [2025-09-24 12:38:29.201] mtd24 attached [2025-09-24 12:38:29.217] mtd28 attached [2025-09-24 12:38:29.233] mtd32 attached [2025-09-24 12:38:29.280] RTNETLINK answers: File exists [2025-09-24 12:38:29.280] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:38:29.322] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:38:29.322] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:38:29.322] ubi0:textures is mounted. [2025-09-24 12:38:29.322] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:38:29.322] ubi1:animations is mounted. [2025-09-24 12:38:29.322] ubi2:dml_code is mounted. [2025-09-24 12:38:29.322] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:38:29.345] data.LB_FadeInType0=100 [2025-09-24 12:38:29.345] data.CHLH_FadeInType0=0 [2025-09-24 12:38:29.345] data.WU_FadeInDelay=0 [2025-09-24 12:38:29.345] max_time_out=0 [2025-09-24 12:38:29.345] No splash screen [2025-09-24 12:38:29.345] stop dss Done [2025-09-24 12:38:29.361] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:38:29.361] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:38:29.393] /dev/mem opened. [2025-09-24 12:38:29.393] Memory mapped at address 0xffffb2531000. [2025-09-24 12:38:29.419] Read at address 0x00600018 (0xffffb2531018): 0x00000000 [2025-09-24 12:38:29.419] Write at address 0x00600018 (0xffffb2531018): 0x00400040, readback 0x00400040 [2025-09-24 12:38:29.515] Loaded PowerVR consumer services. [2025-09-24 12:38:29.643] 512+0 records in [2025-09-24 12:38:29.643] 512+0 records out [2025-09-24 12:38:29.659] Waiting data available... [2025-09-24 12:38:29.691] Starting syslogd/klogd: done [2025-09-24 12:38:29.707] DML Start [2025-09-24 12:38:29.883] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:38:30.107] DML res1: 0 [2025-09-24 12:38:30.632] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:38:30.632] Read Success [2025-09-24 12:38:30.632] Verifying certificate... [2025-09-24 12:38:30.887] Verified OK [2025-09-24 12:38:30.903] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:38:32.596] Verified OK [2025-09-24 12:38:32.596] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:38:33.180] Verified OK [2025-09-24 12:38:33.180] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:38:35.738] fs.protected_hardlinks = 1 [2025-09-24 12:38:35.755] fs.protected_symlinks = 1 [2025-09-24 12:38:35.755] kernel.modules_disabled = 1 [2025-09-24 12:38:35.946] [2025-09-24 12:38:35.946] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:38:37.199] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:38:44.942] SBL1:1210.0.1.0 [2025-09-24 12:38:44.989] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:38:46.557] SBL2:1210.0.1.0 [2025-09-24 12:38:46.588] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:38:46.700] j-A [2025-09-24 12:38:54.073] The R5 Autosar Classic is running [2025-09-24 12:38:54.073] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:38:54.073] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:38:54.680] INIT: version 2.96 booting [2025-09-24 12:38:54.793] INIT: Entering runlevel: 5 [2025-09-24 12:38:54.952] mtd32 attached [2025-09-24 12:38:54.952] mtd28 attached [2025-09-24 12:38:54.968] mtd24 attached [2025-09-24 12:38:55.000] ubi0:dml_code is mounted. [2025-09-24 12:38:55.016] RTNETLINK answers: File exists [2025-09-24 12:38:55.079] ubi2:textures is mounted. [2025-09-24 12:38:55.079] ubi1:animations is mounted. [2025-09-24 12:38:55.079] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:38:55.079] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:38:55.079] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:38:55.079] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:38:55.079] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:38:55.079] data.LB_FadeInType0=100 [2025-09-24 12:38:55.079] data.CHLH_FadeInType0=0 [2025-09-24 12:38:55.079] data.WU_FadeInDelay=0 [2025-09-24 12:38:55.079] max_time_out=0 [2025-09-24 12:38:55.079] No splash screen [2025-09-24 12:38:55.079] stop dss Done [2025-09-24 12:38:55.111] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:38:55.127] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:38:55.159] /dev/mem opened. [2025-09-24 12:38:55.159] Memory mapped at address 0xffffb0725000. [2025-09-24 12:38:55.159] Read at address 0x00600018 (0xffffb0725018): 0x00000000 [2025-09-24 12:38:55.159] Write at address 0x00600018 (0xffffb0725018): 0x00400040, readback 0x00400040 [2025-09-24 12:38:55.272] Loaded PowerVR consumer services. [2025-09-24 12:38:55.383] 512+0 records in [2025-09-24 12:38:55.399] 512+0 records out [2025-09-24 12:38:55.399] Waiting data available... [2025-09-24 12:38:55.431] Starting syslogd/klogd: done [2025-09-24 12:38:55.447] DML Start [2025-09-24 12:38:55.639] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:38:55.879] DML res1: 0 [2025-09-24 12:38:56.246] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:38:56.263] Read Success [2025-09-24 12:38:56.263] Verifying certificate... [2025-09-24 12:38:56.502] Verified OK [2025-09-24 12:38:56.534] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:38:58.229] Verified OK [2025-09-24 12:38:58.250] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:38:58.906] Verified OK [2025-09-24 12:38:58.906] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:39:01.528] fs.protected_hardlinks = 1 [2025-09-24 12:39:01.528] fs.protected_symlinks = 1 [2025-09-24 12:39:01.544] kernel.modules_disabled = 1 [2025-09-24 12:39:01.736] [2025-09-24 12:39:01.736] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:39:02.974] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:39:10.663] SBL1:1210.0.1.0 [2025-09-24 12:39:10.694] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:39:12.278] SBL2:1210.0.1.0 [2025-09-24 12:39:12.310] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:39:12.422] j-A [2025-09-24 12:39:19.794] The R5 Autosar Classic is running [2025-09-24 12:39:19.794] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:39:19.794] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:39:20.401] INIT: version 2.96 booting [2025-09-24 12:39:20.514] INIT: Entering runlevel: 5 [2025-09-24 12:39:20.657] mtd24 attached [2025-09-24 12:39:20.673] mtd28 attached [2025-09-24 12:39:20.689] mtd32 attached [2025-09-24 12:39:20.737] RTNETLINK answers: File exists [2025-09-24 12:39:20.803] ubi1:animations is mounted. [2025-09-24 12:39:20.803] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:39:20.803] ubi0:textures is mounted. [2025-09-24 12:39:20.803] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:39:20.803] ubi2:dml_code is mounted. [2025-09-24 12:39:20.803] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:39:20.803] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:39:20.803] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:39:20.803] data.LB_FadeInType0=100 [2025-09-24 12:39:20.803] data.CHLH_FadeInType0=0 [2025-09-24 12:39:20.803] data.WU_FadeInDelay=0 [2025-09-24 12:39:20.803] max_time_out=0 [2025-09-24 12:39:20.803] No splash screen [2025-09-24 12:39:20.803] stop dss Done [2025-09-24 12:39:20.876] /dev/mem opened. [2025-09-24 12:39:20.876] Memory mapped at address 0xffffbac80000. [2025-09-24 12:39:20.876] Read at address 0x00600018 (0xffffbac80018): 0x00000000 [2025-09-24 12:39:20.876] Write at address 0x00600018 (0xffffbac80018): 0x00400040, readback 0x00400040 [2025-09-24 12:39:20.922] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:39:20.922] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:39:21.082] Loaded PowerVR consumer services. [2025-09-24 12:39:21.114] 512+0 records in [2025-09-24 12:39:21.114] 512+0 records out [2025-09-24 12:39:21.162] Starting syslogd/klogd: done [2025-09-24 12:39:21.194] Waiting data available... [2025-09-24 12:39:21.194] DML Start [2025-09-24 12:39:21.370] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:39:21.593] DML res1: 0 [2025-09-24 12:39:22.022] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:39:22.022] Read Success [2025-09-24 12:39:22.022] Verifying certificate... [2025-09-24 12:39:22.294] Verified OK [2025-09-24 12:39:22.310] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:39:24.044] Verified OK [2025-09-24 12:39:24.044] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:39:24.556] Verified OK [2025-09-24 12:39:24.577] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:39:27.039] fs.protected_hardlinks = 1 [2025-09-24 12:39:27.039] fs.protected_symlinks = 1 [2025-09-24 12:39:27.055] kernel.modules_disabled = 1 [2025-09-24 12:39:27.247] [2025-09-24 12:39:27.247] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:39:28.695] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:39:36.367] SBL1:1210.0.1.0 [2025-09-24 12:39:36.415] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:39:37.981] SBL2:1210.0.1.0 [2025-09-24 12:39:38.029] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:39:38.126] j-A [2025-09-24 12:39:45.480] The R5 Autosar Classic is running [2025-09-24 12:39:45.504] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:39:45.504] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:39:46.111] INIT: version 2.96 booting [2025-09-24 12:39:46.223] INIT: Entering runlevel: 5 [2025-09-24 12:39:46.384] mtd24 attached [2025-09-24 12:39:46.384] mtd32 attached [2025-09-24 12:39:46.400] mtd28 attached [2025-09-24 12:39:46.448] ubi1:dml_code is mounted. [2025-09-24 12:39:46.448] RTNETLINK answers: File exists [2025-09-24 12:39:46.483] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:39:46.483] ubi2:animations is mounted. [2025-09-24 12:39:46.483] ubi0:textures is mounted. [2025-09-24 12:39:46.483] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:39:46.483] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:39:46.483] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:39:46.520] data.LB_FadeInType0=100 [2025-09-24 12:39:46.520] data.CHLH_FadeInType0=0 [2025-09-24 12:39:46.520] data.WU_FadeInDelay=0 [2025-09-24 12:39:46.520] max_time_out=0 [2025-09-24 12:39:46.520] No splash screen [2025-09-24 12:39:46.520] stop dss Done [2025-09-24 12:39:46.520] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:39:46.586] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:39:46.586] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:39:46.586] /dev/mem opened. [2025-09-24 12:39:46.586] Memory mapped at address 0xffffbbd0e000. [2025-09-24 12:39:46.586] Read at address 0x00600018 (0xffffbbd0e018): 0x00000000 [2025-09-24 12:39:46.586] Write at address 0x00600018 (0xffffbbd0e018): 0x00400040, readback 0x00400040 [2025-09-24 12:39:46.763] Loaded PowerVR consumer services. [2025-09-24 12:39:46.810] 512+0 records in [2025-09-24 12:39:46.810] 512+0 records out [2025-09-24 12:39:46.842] Waiting data available... [2025-09-24 12:39:46.858] Starting syslogd/klogd: done [2025-09-24 12:39:46.874] DML Start [2025-09-24 12:39:47.066] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:39:47.242] DML res1: 0 [2025-09-24 12:39:47.738] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:39:47.760] Read Success [2025-09-24 12:39:47.760] Verifying certificate... [2025-09-24 12:39:48.015] Verified OK [2025-09-24 12:39:48.031] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:39:49.706] Verified OK [2025-09-24 12:39:49.706] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:39:50.279] Verified OK [2025-09-24 12:39:50.279] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:39:52.916] fs.protected_hardlinks = 1 [2025-09-24 12:39:52.916] fs.protected_symlinks = 1 [2025-09-24 12:39:52.916] kernel.modules_disabled = 1 [2025-09-24 12:39:53.107] [2025-09-24 12:39:53.107] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:39:54.362] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:40:02.094] SBL1:1210.0.1.0 [2025-09-24 12:40:02.126] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:40:03.708] SBL2:1210.0.1.0 [2025-09-24 12:40:03.740] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:40:03.851] j-A [2025-09-24 12:40:11.191] The R5 Autosar Classic is running [2025-09-24 12:40:11.216] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:40:11.216] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:40:11.823] INIT: version 2.96 booting [2025-09-24 12:40:11.935] INIT: Entering runlevel: 5 [2025-09-24 12:40:12.095] mtd32 attached [2025-09-24 12:40:12.095] mtd24 attached [2025-09-24 12:40:12.111] mtd28 attached [2025-09-24 12:40:12.159] RTNETLINK answers: File exists [2025-09-24 12:40:12.159] ubi0:dml_code is mounted. [2025-09-24 12:40:12.221] ubi2:animations is mounted. [2025-09-24 12:40:12.221] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:40:12.221] ubi1:textures is mounted. [2025-09-24 12:40:12.221] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:40:12.221] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:40:12.221] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:40:12.221] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:40:12.221] data.LB_FadeInType0=100 [2025-09-24 12:40:12.221] data.CHLH_FadeInType0=0 [2025-09-24 12:40:12.221] data.WU_FadeInDelay=0 [2025-09-24 12:40:12.221] max_time_out=0 [2025-09-24 12:40:12.221] No splash screen [2025-09-24 12:40:12.221] stop dss Done [2025-09-24 12:40:12.310] /dev/mem opened. [2025-09-24 12:40:12.310] Memory mapped at address 0xffffbf013000. [2025-09-24 12:40:12.310] Read at address 0x00600018 (0xffffbf013018): 0x00000000 [2025-09-24 12:40:12.310] Write at address 0x00600018 (0xffffbf013018): 0x00400040, readback 0x00400040 [2025-09-24 12:40:12.310] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:40:12.342] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:40:12.453] Loaded PowerVR consumer services. [2025-09-24 12:40:12.550] 512+0 records in [2025-09-24 12:40:12.550] 512+0 records out [2025-09-24 12:40:12.566] Waiting data available... [2025-09-24 12:40:12.598] Starting syslogd/klogd: done [2025-09-24 12:40:12.614] DML Start [2025-09-24 12:40:12.789] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:40:12.998] DML res1: 0 [2025-09-24 12:40:13.483] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:40:13.483] Read Success [2025-09-24 12:40:13.483] Verifying certificate... [2025-09-24 12:40:13.723] Verified OK [2025-09-24 12:40:13.739] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:40:15.508] Verified OK [2025-09-24 12:40:15.508] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:40:16.124] Verified OK [2025-09-24 12:40:16.124] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:40:18.698] fs.protected_hardlinks = 1 [2025-09-24 12:40:18.698] fs.protected_symlinks = 1 [2025-09-24 12:40:18.714] kernel.modules_disabled = 1 [2025-09-24 12:40:18.906] [2025-09-24 12:40:18.906] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:40:20.073] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:40:27.808] SBL1:1210.0.1.0 [2025-09-24 12:40:27.856] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:40:29.423] SBL2:1210.0.1.0 [2025-09-24 12:40:29.455] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:40:29.567] j-A [2025-09-24 12:40:36.920] The R5 Autosar Classic is running [2025-09-24 12:40:36.920] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:40:36.941] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:40:37.549] INIT: version 2.96 booting [2025-09-24 12:40:37.661] INIT: Entering runlevel: 5 [2025-09-24 12:40:37.821] mtd32 attached [2025-09-24 12:40:37.821] mtd24 attached [2025-09-24 12:40:37.837] mtd28 attached [2025-09-24 12:40:37.885] ubi0:dml_code is mounted. [2025-09-24 12:40:37.885] RTNETLINK answers: File exists [2025-09-24 12:40:37.924] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:40:37.924] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:40:37.924] ubi1:textures is mounted. [2025-09-24 12:40:37.924] ubi2:animations is mounted. [2025-09-24 12:40:37.924] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:40:37.924] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:40:37.924] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:40:37.946] data.LB_FadeInType0=100 [2025-09-24 12:40:37.946] data.CHLH_FadeInType0=0 [2025-09-24 12:40:37.946] data.WU_FadeInDelay=0 [2025-09-24 12:40:37.946] max_time_out=0 [2025-09-24 12:40:37.946] No splash screen [2025-09-24 12:40:37.946] stop dss Done [2025-09-24 12:40:37.978] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:40:37.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:40:38.034] /dev/mem opened. [2025-09-24 12:40:38.034] Memory mapped at address 0xffff8605e000. [2025-09-24 12:40:38.034] Read at address 0x00600018 (0xffff8605e018): 0x00000000 [2025-09-24 12:40:38.035] Write at address 0x00600018 (0xffff8605e018): 0x00400040, readback 0x00400040 [2025-09-24 12:40:38.146] Loaded PowerVR consumer services. [2025-09-24 12:40:38.258] 512+0 records in [2025-09-24 12:40:38.258] 512+0 records out [2025-09-24 12:40:38.274] Waiting data available... [2025-09-24 12:40:38.307] Starting syslogd/klogd: done [2025-09-24 12:40:38.323] DML Start [2025-09-24 12:40:38.515] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:40:38.722] DML res1: 0 [2025-09-24 12:40:39.154] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:40:39.175] Read Success [2025-09-24 12:40:39.175] Verifying certificate... [2025-09-24 12:40:39.399] Verified OK [2025-09-24 12:40:39.415] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:40:41.086] Verified OK [2025-09-24 12:40:41.086] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:40:41.736] Verified OK [2025-09-24 12:40:41.736] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:40:44.246] fs.protected_hardlinks = 1 [2025-09-24 12:40:44.276] fs.protected_symlinks = 1 [2025-09-24 12:40:44.276] kernel.modules_disabled = 1 [2025-09-24 12:40:44.453] [2025-09-24 12:40:44.453] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:40:45.853] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:40:53.533] SBL1:1210.0.1.0 [2025-09-24 12:40:53.580] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:40:55.148] SBL2:1210.0.1.0 [2025-09-24 12:40:55.196] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:40:55.292] j-A [2025-09-24 12:41:02.646] The R5 Autosar Classic is running [2025-09-24 12:41:02.670] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:41:02.670] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:41:03.278] INIT: version 2.96 booting [2025-09-24 12:41:03.389] INIT: Entering runlevel: 5 [2025-09-24 12:41:03.534] mtd24 attached [2025-09-24 12:41:03.550] mtd28 attached [2025-09-24 12:41:03.566] mtd32 attached [2025-09-24 12:41:03.598] RTNETLINK answers: File exists [2025-09-24 12:41:03.649] ubi0:textures is mounted. [2025-09-24 12:41:03.649] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:41:03.649] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:41:03.649] ubi2:dml_code is mounted. [2025-09-24 12:41:03.649] ubi1:animations is mounted. [2025-09-24 12:41:03.649] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:41:03.649] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:41:03.649] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:41:03.670] data.LB_FadeInType0=100 [2025-09-24 12:41:03.670] data.CHLH_FadeInType0=0 [2025-09-24 12:41:03.670] data.WU_FadeInDelay=0 [2025-09-24 12:41:03.671] max_time_out=0 [2025-09-24 12:41:03.671] No splash screen [2025-09-24 12:41:03.671] stop dss Done [2025-09-24 12:41:03.686] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:41:03.708] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:41:03.724] /dev/mem opened. [2025-09-24 12:41:03.724] Memory mapped at address 0xffffa5f84000. [2025-09-24 12:41:03.750] Read at address 0x00600018 (0xffffa5f84018): 0x00000000 [2025-09-24 12:41:03.750] Write at address 0x00600018 (0xffffa5f84018): 0x00400040, readback 0x00400040 [2025-09-24 12:41:03.958] Loaded PowerVR consumer services. [2025-09-24 12:41:03.990] 512+0 records in [2025-09-24 12:41:03.990] 512+0 records out [2025-09-24 12:41:04.006] Waiting data available... [2025-09-24 12:41:04.038] Starting syslogd/klogd: done [2025-09-24 12:41:04.054] DML Start [2025-09-24 12:41:04.229] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:41:04.485] DML res1: 0 [2025-09-24 12:41:04.898] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:41:04.898] Read Success [2025-09-24 12:41:04.898] Verifying certificate... [2025-09-24 12:41:05.154] Verified OK [2025-09-24 12:41:05.170] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:41:06.865] Verified OK [2025-09-24 12:41:06.865] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:41:07.472] Verified OK [2025-09-24 12:41:07.472] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:41:10.078] fs.protected_hardlinks = 1 [2025-09-24 12:41:10.078] fs.protected_symlinks = 1 [2025-09-24 12:41:10.094] kernel.modules_disabled = 1 [2025-09-24 12:41:10.302] [2025-09-24 12:41:10.302] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:41:11.569] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:41:19.239] SBL1:1210.0.1.0 [2025-09-24 12:41:19.287] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:41:20.854] SBL2:1210.0.1.0 [2025-09-24 12:41:20.901] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:41:20.998] j-A [2025-09-24 12:41:28.351] The R5 Autosar Classic is running [2025-09-24 12:41:28.375] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:41:28.375] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:41:28.983] INIT: version 2.96 booting [2025-09-24 12:41:29.094] INIT: Entering runlevel: 5 [2025-09-24 12:41:29.255] mtd24 attached [2025-09-24 12:41:29.255] mtd28 attached [2025-09-24 12:41:29.287] mtd32 attached [2025-09-24 12:41:29.287] ubi0:textures is mounted. [2025-09-24 12:41:29.318] RTNETLINK answers: File exists [2025-09-24 12:41:29.318] ubi1:animations is mounted. [2025-09-24 12:41:29.348] ubi2:dml_code is mounted. [2025-09-24 12:41:29.348] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:41:29.348] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:41:29.380] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:41:29.380] data.LB_FadeInType0=100 [2025-09-24 12:41:29.380] data.CHLH_FadeInType0=0 [2025-09-24 12:41:29.380] data.WU_FadeInDelay=0 [2025-09-24 12:41:29.380] max_time_out=0 [2025-09-24 12:41:29.380] No splash screen [2025-09-24 12:41:29.380] stop dss Done [2025-09-24 12:41:29.380] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:41:29.380] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:41:29.412] /dev/mem opened. [2025-09-24 12:41:29.444] Memory mapped at address 0xffffa0a72000. [2025-09-24 12:41:29.444] Read at address 0x00600018 (0xffffa0a72018): 0x00000000 [2025-09-24 12:41:29.444] Write at address 0x00600018 (0xffffa0a72018): 0x00400040, readback 0x00400040 [2025-09-24 12:41:29.476] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:41:29.499] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:41:29.643] Loaded PowerVR consumer services. [2025-09-24 12:41:29.707] 512+0 records in [2025-09-24 12:41:29.707] 512+0 records out [2025-09-24 12:41:29.739] Waiting data available... [2025-09-24 12:41:29.739] Starting syslogd/klogd: done [2025-09-24 12:41:29.755] DML Start [2025-09-24 12:41:29.930] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:41:30.186] DML res1: 0 [2025-09-24 12:41:30.555] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:41:30.571] Read Success [2025-09-24 12:41:30.571] Verifying certificate... [2025-09-24 12:41:30.810] Verified OK [2025-09-24 12:41:30.826] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:41:32.457] Verified OK [2025-09-24 12:41:32.457] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:41:33.058] Verified OK [2025-09-24 12:41:33.058] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:41:35.775] fs.protected_hardlinks = 1 [2025-09-24 12:41:35.791] fs.protected_symlinks = 1 [2025-09-24 12:41:35.791] kernel.modules_disabled = 1 [2025-09-24 12:41:36.016] [2025-09-24 12:41:36.016] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:41:37.244] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:41:44.964] SBL1:1210.0.1.0 [2025-09-24 12:41:45.012] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:41:46.579] SBL2:1210.0.1.0 [2025-09-24 12:41:46.610] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:41:46.722] j-A [2025-09-24 12:41:54.077] The R5 Autosar Classic is running [2025-09-24 12:41:54.077] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:41:54.097] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:41:54.705] INIT: version 2.96 booting [2025-09-24 12:41:54.816] INIT: Entering runlevel: 5 [2025-09-24 12:41:54.961] mtd24 attached [2025-09-24 12:41:54.977] mtd28 attached [2025-09-24 12:41:54.993] mtd32 attached [2025-09-24 12:41:55.025] ubi0:textures is mounted. [2025-09-24 12:41:55.041] RTNETLINK answers: File exists [2025-09-24 12:41:55.041] ubi1:animations is mounted. [2025-09-24 12:41:55.097] ubi2:dml_code is mounted. [2025-09-24 12:41:55.097] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:41:55.097] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:41:55.097] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:41:55.097] data.LB_FadeInType0=100 [2025-09-24 12:41:55.097] data.CHLH_FadeInType0=0 [2025-09-24 12:41:55.097] data.WU_FadeInDelay=0 [2025-09-24 12:41:55.097] max_time_out=0 [2025-09-24 12:41:55.097] No splash screen [2025-09-24 12:41:55.097] stop dss Done [2025-09-24 12:41:55.097] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:41:55.097] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:41:55.128] /dev/mem opened. [2025-09-24 12:41:55.160] Memory mapped at address 0xffffad7be000. [2025-09-24 12:41:55.160] Read at address 0x00600018 (0xffffad7be018): 0x00000000 [2025-09-24 12:41:55.160] Write at address 0x00600018 (0xffffad7be018): 0x00400040, readback 0x00400040 [2025-09-24 12:41:55.160] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:41:55.176] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:41:55.321] Loaded PowerVR consumer services. [2025-09-24 12:41:55.416] Waiting data available... [2025-09-24 12:41:55.448] 512+0 records in [2025-09-24 12:41:55.448] 512+0 records out [2025-09-24 12:41:55.480] Starting syslogd/klogd: done [2025-09-24 12:41:55.496] DML Start [2025-09-24 12:41:55.688] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:41:55.880] DML res1: 0 [2025-09-24 12:41:56.354] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:41:56.354] Read Success [2025-09-24 12:41:56.354] Verifying certificate... [2025-09-24 12:41:56.641] Verified OK [2025-09-24 12:41:56.673] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:41:58.448] Verified OK [2025-09-24 12:41:58.448] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:41:58.943] Verified OK [2025-09-24 12:41:58.959] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:42:01.326] fs.protected_hardlinks = 1 [2025-09-24 12:42:01.326] fs.protected_symlinks = 1 [2025-09-24 12:42:01.342] kernel.modules_disabled = 1 [2025-09-24 12:42:01.534] [2025-09-24 12:42:01.534] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:42:02.980] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:42:10.689] SBL1:1210.0.1.0 [2025-09-24 12:42:10.720] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:42:12.304] SBL2:1210.0.1.0 [2025-09-24 12:42:12.336] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:42:12.447] j-A [2025-09-24 12:42:19.819] The R5 Autosar Classic is running [2025-09-24 12:42:19.819] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:42:19.819] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:42:20.426] INIT: version 2.96 booting [2025-09-24 12:42:20.539] INIT: Entering runlevel: 5 [2025-09-24 12:42:20.682] mtd24 attached [2025-09-24 12:42:20.698] mtd32 attached [2025-09-24 12:42:20.714] mtd28 attached [2025-09-24 12:42:20.746] ubi0:textures is mounted. [2025-09-24 12:42:20.762] RTNETLINK answers: File exists [2025-09-24 12:42:20.819] ubi2:animations is mounted. [2025-09-24 12:42:20.819] ubi1:dml_code is mounted. [2025-09-24 12:42:20.819] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:42:20.819] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:42:20.819] data.LB_FadeInType0=100 [2025-09-24 12:42:20.819] data.CHLH_FadeInType0=0 [2025-09-24 12:42:20.819] data.WU_FadeInDelay=0 [2025-09-24 12:42:20.819] max_time_out=0 [2025-09-24 12:42:20.819] No splash screen [2025-09-24 12:42:20.819] stop dss Done [2025-09-24 12:42:20.819] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:42:20.819] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:42:20.819] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:42:20.851] /dev/mem opened. [2025-09-24 12:42:20.851] Memory mapped at address 0xffffa2d86000. [2025-09-24 12:42:20.888] Read at address 0x00600018 (0xffffa2d86018): 0x00000000 [2025-09-24 12:42:20.888] Write at address 0x00600018 (0xffffa2d86018): 0x00400040, readback 0x00400040 [2025-09-24 12:42:20.888] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:42:20.888] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:42:21.127] Loaded PowerVR consumer services. [2025-09-24 12:42:21.143] Waiting data available... [2025-09-24 12:42:21.159] 512+0 records in [2025-09-24 12:42:21.159] 512+0 records out [2025-09-24 12:42:21.175] Starting syslogd/klogd: done [2025-09-24 12:42:21.192] DML Start [2025-09-24 12:42:21.367] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:42:21.591] DML res1: 0 [2025-09-24 12:42:22.030] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:42:22.030] Read Success [2025-09-24 12:42:22.030] Verifying certificate... [2025-09-24 12:42:22.317] Verified OK [2025-09-24 12:42:22.334] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:42:24.012] Verified OK [2025-09-24 12:42:24.012] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:42:24.626] Verified OK [2025-09-24 12:42:24.626] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:42:27.152] fs.protected_hardlinks = 1 [2025-09-24 12:42:27.152] fs.protected_symlinks = 1 [2025-09-24 12:42:27.168] kernel.modules_disabled = 1 [2025-09-24 12:42:27.360] [2025-09-24 12:42:27.360] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:42:28.639] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:42:36.406] SBL1:1210.0.1.0 [2025-09-24 12:42:36.438] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:42:38.021] SBL2:1210.0.1.0 [2025-09-24 12:42:38.053] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:42:38.165] j-A [2025-09-24 12:42:45.539] The R5 Autosar Classic is running [2025-09-24 12:42:45.539] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:42:45.539] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:42:46.147] INIT: version 2.96 booting [2025-09-24 12:42:46.258] INIT: Entering runlevel: 5 [2025-09-24 12:42:46.418] mtd24 attached [2025-09-24 12:42:46.418] mtd28 attached [2025-09-24 12:42:46.434] mtd32 attached [2025-09-24 12:42:46.482] ubi0:textures is mounted. [2025-09-24 12:42:46.552] RTNETLINK answers: File exists [2025-09-24 12:42:46.552] ubi2:dml_code is mounted. [2025-09-24 12:42:46.552] ubi1:animations is mounted. [2025-09-24 12:42:46.552] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:42:46.552] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:42:46.552] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:42:46.552] data.LB_FadeInType0=100 [2025-09-24 12:42:46.552] data.CHLH_FadeInType0=0 [2025-09-24 12:42:46.552] data.WU_FadeInDelay=0 [2025-09-24 12:42:46.552] max_time_out=0 [2025-09-24 12:42:46.552] No splash screen [2025-09-24 12:42:46.552] stop dss Done [2025-09-24 12:42:46.552] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:42:46.552] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:42:46.610] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:42:46.610] /dev/mem opened. [2025-09-24 12:42:46.610] Memory mapped at address 0xffff7fcca000. [2025-09-24 12:42:46.610] Read at address 0x00600018 (0xffff7fcca018): 0x00000000 [2025-09-24 12:42:46.610] Write at address 0x00600018 (0xffff7fcca018): 0x00400040, readback 0x00400040 [2025-09-24 12:42:46.610] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:42:46.834] Loaded PowerVR consumer services. [2025-09-24 12:42:46.866] Waiting data available... [2025-09-24 12:42:46.882] 512+0 records in [2025-09-24 12:42:46.882] 512+0 records out [2025-09-24 12:42:46.930] Starting syslogd/klogd: done [2025-09-24 12:42:46.946] DML Start [2025-09-24 12:42:47.106] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:42:47.345] DML res1: 0 [2025-09-24 12:42:47.848] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:42:47.848] Read Success [2025-09-24 12:42:47.848] Verifying certificate... [2025-09-24 12:42:48.072] Verified OK [2025-09-24 12:42:48.088] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:42:49.683] Verified OK [2025-09-24 12:42:49.683] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:42:50.330] Verified OK [2025-09-24 12:42:50.330] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:42:53.016] fs.protected_hardlinks = 1 [2025-09-24 12:42:53.032] fs.protected_symlinks = 1 [2025-09-24 12:42:53.032] kernel.modules_disabled = 1 [2025-09-24 12:42:53.239] [2025-09-24 12:42:53.239] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:42:54.439] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:43:02.127] SBL1:1210.0.1.0 [2025-09-24 12:43:02.159] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:43:03.741] SBL2:1210.0.1.0 [2025-09-24 12:43:03.773] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:43:03.885] j-A [2025-09-24 12:43:11.255] The R5 Autosar Classic is running [2025-09-24 12:43:11.255] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:43:11.255] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:43:11.863] INIT: version 2.96 booting [2025-09-24 12:43:11.975] INIT: Entering runlevel: 5 [2025-09-24 12:43:12.119] mtd24 attached [2025-09-24 12:43:12.135] mtd28 attached [2025-09-24 12:43:12.150] mtd32 attached [2025-09-24 12:43:12.254] ubi1:animations is mounted. [2025-09-24 12:43:12.254] RTNETLINK answers: File exists [2025-09-24 12:43:12.254] ubi0:textures is mounted. [2025-09-24 12:43:12.254] ubi2:dml_code is mounted. [2025-09-24 12:43:12.254] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:43:12.254] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:43:12.254] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:43:12.254] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:43:12.254] data.LB_FadeInType0=100 [2025-09-24 12:43:12.254] data.CHLH_FadeInType0=0 [2025-09-24 12:43:12.254] data.WU_FadeInDelay=0 [2025-09-24 12:43:12.254] max_time_out=0 [2025-09-24 12:43:12.254] No splash screen [2025-09-24 12:43:12.254] stop dss Done [2025-09-24 12:43:12.254] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:43:12.286] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:43:12.323] /dev/mem opened. [2025-09-24 12:43:12.323] Memory mapped at address 0xffffaf059000. [2025-09-24 12:43:12.323] Read at address 0x00600018 (0xffffaf059018): 0x00000000 [2025-09-24 12:43:12.323] Write at address 0x00600018 (0xffffaf059018): 0x00400040, readback 0x00400040 [2025-09-24 12:43:12.323] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:43:12.547] Loaded PowerVR consumer services. [2025-09-24 12:43:12.563] Waiting data available... [2025-09-24 12:43:12.579] 512+0 records in [2025-09-24 12:43:12.579] 512+0 records out [2025-09-24 12:43:12.627] Starting syslogd/klogd: done [2025-09-24 12:43:12.642] DML Start [2025-09-24 12:43:12.803] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:43:13.027] DML res1: 0 [2025-09-24 12:43:13.506] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:43:13.522] Read Success [2025-09-24 12:43:13.522] Verifying certificate... [2025-09-24 12:43:13.746] Verified OK [2025-09-24 12:43:13.762] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:43:15.454] Verified OK [2025-09-24 12:43:15.454] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:43:16.086] Verified OK [2025-09-24 12:43:16.086] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:43:18.705] fs.protected_hardlinks = 1 [2025-09-24 12:43:18.705] fs.protected_symlinks = 1 [2025-09-24 12:43:18.705] kernel.modules_disabled = 1 [2025-09-24 12:43:18.896] [2025-09-24 12:43:18.896] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:43:20.115] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:43:27.829] SBL1:1210.0.1.0 [2025-09-24 12:43:27.877] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:43:29.443] SBL2:1210.0.1.0 [2025-09-24 12:43:29.491] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:43:29.588] j-A [2025-09-24 12:43:36.943] The R5 Autosar Classic is running [2025-09-24 12:43:36.966] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:43:36.966] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:43:37.573] INIT: version 2.96 booting [2025-09-24 12:43:37.685] INIT: Entering runlevel: 5 [2025-09-24 12:43:37.844] mtd24 attached [2025-09-24 12:43:37.844] mtd28 attached [2025-09-24 12:43:37.860] mtd32 attached [2025-09-24 12:43:37.909] ubi0:textures is mounted. [2025-09-24 12:43:37.909] RTNETLINK answers: File exists [2025-09-24 12:43:37.951] ubi2:dml_code is mounted. [2025-09-24 12:43:37.951] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:43:37.951] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:43:37.951] ubi1:animations is mounted. [2025-09-24 12:43:37.951] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:43:37.951] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:43:37.951] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:43:37.972] data.LB_FadeInType0=100 [2025-09-24 12:43:37.972] data.CHLH_FadeInType0=0 [2025-09-24 12:43:37.972] data.WU_FadeInDelay=0 [2025-09-24 12:43:37.972] max_time_out=0 [2025-09-24 12:43:37.972] No splash screen [2025-09-24 12:43:37.972] stop dss Done [2025-09-24 12:43:38.051] /dev/mem opened. [2025-09-24 12:43:38.051] Memory mapped at address 0xffffb30e2000. [2025-09-24 12:43:38.051] Read at address 0x00600018 (0xffffb30e2018): 0x00000000 [2025-09-24 12:43:38.051] Write at address 0x00600018 (0xffffb30e2018): 0x00400040, readback 0x00400040 [2025-09-24 12:43:38.051] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:43:38.051] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:43:38.242] Loaded PowerVR consumer services. [2025-09-24 12:43:38.297] 512+0 records in [2025-09-24 12:43:38.297] 512+0 records out [2025-09-24 12:43:38.297] Waiting data available... [2025-09-24 12:43:38.313] Starting syslogd/klogd: done [2025-09-24 12:43:38.329] DML Start [2025-09-24 12:43:38.506] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:43:38.729] DML res1: 0 [2025-09-24 12:43:39.253] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:43:39.253] Read Success [2025-09-24 12:43:39.253] Verifying certificate... [2025-09-24 12:43:39.541] Verified OK [2025-09-24 12:43:39.557] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:43:41.236] Verified OK [2025-09-24 12:43:41.236] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:43:41.875] Verified OK [2025-09-24 12:43:41.875] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:43:44.432] fs.protected_hardlinks = 1 [2025-09-24 12:43:44.432] fs.protected_symlinks = 1 [2025-09-24 12:43:44.448] kernel.modules_disabled = 1 [2025-09-24 12:43:44.641] [2025-09-24 12:43:44.641] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:43:45.808] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:43:53.568] SBL1:1210.0.1.0 [2025-09-24 12:43:53.600] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:43:55.183] SBL2:1210.0.1.0 [2025-09-24 12:43:55.215] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:43:55.326] j-A [2025-09-24 12:44:02.665] The R5 Autosar Classic is running [2025-09-24 12:44:02.690] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:44:02.690] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:44:03.298] INIT: version 2.96 booting [2025-09-24 12:44:03.410] INIT: Entering runlevel: 5 [2025-09-24 12:44:03.554] mtd24 attached [2025-09-24 12:44:03.570] mtd32 attached [2025-09-24 12:44:03.586] mtd28 attached [2025-09-24 12:44:03.646] RTNETLINK answers: File exists [2025-09-24 12:44:03.646] ubi1:dml_code is mounted. [2025-09-24 12:44:03.646] ubi0:textures is mounted. [2025-09-24 12:44:03.646] ubi2:animations is mounted. [2025-09-24 12:44:03.698] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:44:03.698] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:44:03.698] data.LB_FadeInType0=100 [2025-09-24 12:44:03.698] data.CHLH_FadeInType0=0 [2025-09-24 12:44:03.698] data.WU_FadeInDelay=0 [2025-09-24 12:44:03.698] max_time_out=0 [2025-09-24 12:44:03.698] No splash screen [2025-09-24 12:44:03.698] stop dss Done [2025-09-24 12:44:03.698] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:44:03.698] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:44:03.698] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:44:03.730] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:44:03.765] /dev/mem opened. [2025-09-24 12:44:03.765] Memory mapped at address 0xffffba2be000. [2025-09-24 12:44:03.765] Read at address 0x00600018 (0xffffba2be018): 0x00000000 [2025-09-24 12:44:03.765] Write at address 0x00600018 (0xffffba2be018): 0x00400040, readback 0x00400040 [2025-09-24 12:44:03.765] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:44:03.862] Loaded PowerVR consumer services. [2025-09-24 12:44:04.027] 512+0 records in [2025-09-24 12:44:04.027] 512+0 records out [2025-09-24 12:44:04.027] Waiting data available... [2025-09-24 12:44:04.043] Starting syslogd/klogd: done [2025-09-24 12:44:04.059] DML Start [2025-09-24 12:44:04.252] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:44:04.475] DML res1: 0 [2025-09-24 12:44:04.934] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:44:04.934] Read Success [2025-09-24 12:44:04.934] Verifying certificate... [2025-09-24 12:44:05.206] Verified OK [2025-09-24 12:44:05.222] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:44:06.800] Verified OK [2025-09-24 12:44:06.800] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:44:07.345] Verified OK [2025-09-24 12:44:07.345] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:44:10.094] fs.protected_hardlinks = 1 [2025-09-24 12:44:10.123] fs.protected_symlinks = 1 [2025-09-24 12:44:10.123] kernel.modules_disabled = 1 [2025-09-24 12:44:10.299] [2025-09-24 12:44:10.299] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:44:11.569] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:44:19.290] SBL1:1210.0.1.0 [2025-09-24 12:44:19.338] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:44:20.905] SBL2:1210.0.1.0 [2025-09-24 12:44:20.953] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:44:21.049] j-A [2025-09-24 12:44:28.404] The R5 Autosar Classic is running [2025-09-24 12:44:28.428] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:44:28.428] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:44:29.035] INIT: version 2.96 booting [2025-09-24 12:44:29.147] INIT: Entering runlevel: 5 [2025-09-24 12:44:29.307] mtd32 attached [2025-09-24 12:44:29.323] mtd24 attached [2025-09-24 12:44:29.339] mtd28 attached [2025-09-24 12:44:29.339] ubi0:dml_code is mounted. [2025-09-24 12:44:29.371] RTNETLINK answers: File exists [2025-09-24 12:44:29.387] ubi1:textures is mounted. [2025-09-24 12:44:29.387] ubi2:animations is mounted. [2025-09-24 12:44:29.440] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:44:29.440] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:44:29.440] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:44:29.440] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:44:29.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:44:29.440] data.LB_FadeInType0=100 [2025-09-24 12:44:29.440] data.CHLH_FadeInType0=0 [2025-09-24 12:44:29.440] data.WU_FadeInDelay=0 [2025-09-24 12:44:29.440] max_time_out=0 [2025-09-24 12:44:29.440] No splash screen [2025-09-24 12:44:29.440] stop dss Done [2025-09-24 12:44:29.517] /dev/mem opened. [2025-09-24 12:44:29.517] Memory mapped at address 0xffff9907d000. [2025-09-24 12:44:29.517] Read at address 0x00600018 (0xffff9907d018): 0x00000000 [2025-09-24 12:44:29.517] Write at address 0x00600018 (0xffff9907d018): 0x00400040, readback 0x00400040 [2025-09-24 12:44:29.517] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:44:29.517] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:44:29.613] Loaded PowerVR consumer services. [2025-09-24 12:44:29.757] Waiting data available... [2025-09-24 12:44:29.773] 512+0 records in [2025-09-24 12:44:29.773] 512+0 records out [2025-09-24 12:44:29.789] Starting syslogd/klogd: done [2025-09-24 12:44:29.805] DML Start [2025-09-24 12:44:29.980] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:44:30.204] DML res1: 0 [2025-09-24 12:44:30.676] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:44:30.676] Read Success [2025-09-24 12:44:30.676] Verifying certificate... [2025-09-24 12:44:30.932] Verified OK [2025-09-24 12:44:30.932] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:44:32.575] Verified OK [2025-09-24 12:44:32.575] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:44:33.205] Verified OK [2025-09-24 12:44:33.205] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:44:35.778] fs.protected_hardlinks = 1 [2025-09-24 12:44:35.778] fs.protected_symlinks = 1 [2025-09-24 12:44:35.778] kernel.modules_disabled = 1 [2025-09-24 12:44:35.970] [2025-09-24 12:44:35.970] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:44:37.303] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:44:45.022] SBL1:1210.0.1.0 [2025-09-24 12:44:45.070] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:44:46.636] SBL2:1210.0.1.0 [2025-09-24 12:44:46.684] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:44:46.780] j-A [2025-09-24 12:44:54.134] The R5 Autosar Classic is running [2025-09-24 12:44:54.156] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:44:54.156] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:44:54.764] INIT: version 2.96 booting [2025-09-24 12:44:54.875] INIT: Entering runlevel: 5 [2025-09-24 12:44:55.036] mtd24 attached [2025-09-24 12:44:55.036] mtd28 attached [2025-09-24 12:44:55.052] mtd32 attached [2025-09-24 12:44:55.100] ubi0:textures is mounted. [2025-09-24 12:44:55.100] RTNETLINK answers: File exists [2025-09-24 12:44:55.160] ubi1:animations is mounted. [2025-09-24 12:44:55.160] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:44:55.160] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:44:55.160] ubi2:dml_code is mounted. [2025-09-24 12:44:55.160] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:44:55.160] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:44:55.160] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:44:55.160] data.LB_FadeInType0=100 [2025-09-24 12:44:55.160] data.CHLH_FadeInType0=0 [2025-09-24 12:44:55.160] data.WU_FadeInDelay=0 [2025-09-24 12:44:55.160] max_time_out=0 [2025-09-24 12:44:55.160] No splash screen [2025-09-24 12:44:55.160] stop dss Done [2025-09-24 12:44:55.191] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:44:55.232] /dev/mem opened. [2025-09-24 12:44:55.232] Memory mapped at address 0xffff8095b000. [2025-09-24 12:44:55.232] Read at address 0x00600018 (0xffff8095b018): 0x00000000 [2025-09-24 12:44:55.232] Write at address 0x00600018 (0xffff8095b018): 0x00400040, readback 0x00400040 [2025-09-24 12:44:55.232] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:44:55.312] Loaded PowerVR consumer services. [2025-09-24 12:44:55.494] Waiting data available... [2025-09-24 12:44:55.494] 512+0 records in [2025-09-24 12:44:55.494] 512+0 records out [2025-09-24 12:44:55.510] Starting syslogd/klogd: done [2025-09-24 12:44:55.526] DML Start [2025-09-24 12:44:55.734] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:44:55.958] DML res1: 0 [2025-09-24 12:44:56.400] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:44:56.400] Read Success [2025-09-24 12:44:56.400] Verifying certificate... [2025-09-24 12:44:56.704] Verified OK [2025-09-24 12:44:56.720] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:44:58.254] Verified OK [2025-09-24 12:44:58.254] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:44:58.926] Verified OK [2025-09-24 12:44:58.926] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:45:01.628] fs.protected_hardlinks = 1 [2025-09-24 12:45:01.644] fs.protected_symlinks = 1 [2025-09-24 12:45:01.644] kernel.modules_disabled = 1 [2025-09-24 12:45:01.836] [2025-09-24 12:45:01.836] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:45:03.009] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:45:10.751] SBL1:1210.0.1.0 [2025-09-24 12:45:10.799] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:45:12.366] SBL2:1210.0.1.0 [2025-09-24 12:45:12.414] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:45:12.510] j-A [2025-09-24 12:45:19.863] The R5 Autosar Classic is running [2025-09-24 12:45:19.887] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:45:19.887] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:45:20.496] INIT: version 2.96 booting [2025-09-24 12:45:20.607] INIT: Entering runlevel: 5 [2025-09-24 12:45:20.767] mtd24 attached [2025-09-24 12:45:20.783] mtd28 attached [2025-09-24 12:45:20.783] mtd32 attached [2025-09-24 12:45:20.831] RTNETLINK answers: File exists [2025-09-24 12:45:20.878] ubi1:animations is mounted. [2025-09-24 12:45:20.878] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:45:20.878] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:45:20.878] ubi0:textures is mounted. [2025-09-24 12:45:20.878] ubi2:dml_code is mounted. [2025-09-24 12:45:20.878] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:45:20.878] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:45:20.878] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:45:20.908] data.LB_FadeInType0=100 [2025-09-24 12:45:20.908] data.CHLH_FadeInType0=0 [2025-09-24 12:45:20.908] data.WU_FadeInDelay=0 [2025-09-24 12:45:20.908] max_time_out=0 [2025-09-24 12:45:20.908] No splash screen [2025-09-24 12:45:20.908] stop dss Done [2025-09-24 12:45:20.953] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:45:20.953] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:45:20.953] /dev/mem opened. [2025-09-24 12:45:20.985] Memory mapped at address 0xffffb987d000. [2025-09-24 12:45:20.985] Read at address 0x00600018 (0xffffb987d018): 0x00000000 [2025-09-24 12:45:20.985] Write at address 0x00600018 (0xffffb987d018): 0x00400040, readback 0x00400040 [2025-09-24 12:45:21.065] Loaded PowerVR consumer services. [2025-09-24 12:45:21.209] 512+0 records in [2025-09-24 12:45:21.209] 512+0 records out [2025-09-24 12:45:21.224] Waiting data available... [2025-09-24 12:45:21.257] Starting syslogd/klogd: done [2025-09-24 12:45:21.289] DML Start [2025-09-24 12:45:21.448] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:45:21.657] DML res1: 0 [2025-09-24 12:45:22.152] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:45:22.152] Read Success [2025-09-24 12:45:22.152] Verifying certificate... [2025-09-24 12:45:22.407] Verified OK [2025-09-24 12:45:22.423] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:45:24.180] Verified OK [2025-09-24 12:45:24.180] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:45:24.788] Verified OK [2025-09-24 12:45:24.788] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:45:27.314] fs.protected_hardlinks = 1 [2025-09-24 12:45:27.330] fs.protected_symlinks = 1 [2025-09-24 12:45:27.330] kernel.modules_disabled = 1 [2025-09-24 12:45:27.522] [2025-09-24 12:45:27.522] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:45:28.728] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:45:36.463] SBL1:1210.0.1.0 [2025-09-24 12:45:36.511] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 12:45:38.078] SBL2:1210.0.1.0 [2025-09-24 12:45:38.110] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:45:38.222] j-A [2025-09-24 12:45:45.576] The R5 Autosar Classic is running [2025-09-24 12:45:45.576] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:45:45.597] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:45:46.204] INIT: version 2.96 booting [2025-09-24 12:45:46.316] INIT: Entering runlevel: 5 [2025-09-24 12:45:46.461] mtd24 attached [2025-09-24 12:45:46.476] mtd28 attached [2025-09-24 12:45:46.476] mtd32 attached [2025-09-24 12:45:46.575] ubi0:textures is mounted. [2025-09-24 12:45:46.575] RTNETLINK answers: File exists [2025-09-24 12:45:46.575] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:45:46.575] ubi1:animations is mounted. [2025-09-24 12:45:46.575] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:45:46.575] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:45:46.575] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:45:46.575] ubi2:dml_code is mounted. [2025-09-24 12:45:46.575] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:45:46.604] data.LB_FadeInType0=100 [2025-09-24 12:45:46.604] data.CHLH_FadeInType0=0 [2025-09-24 12:45:46.604] data.WU_FadeInDelay=0 [2025-09-24 12:45:46.604] max_time_out=0 [2025-09-24 12:45:46.604] No splash screen [2025-09-24 12:45:46.604] stop dss Done [2025-09-24 12:45:46.632] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:45:46.632] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:45:46.673] /dev/mem opened. [2025-09-24 12:45:46.673] Memory mapped at address 0xffff8b49a000. [2025-09-24 12:45:46.673] Read at address 0x00600018 (0xffff8b49a018): 0x00000000 [2025-09-24 12:45:46.673] Write at address 0x00600018 (0xffff8b49a018): 0x00400040, readback 0x00400040 [2025-09-24 12:45:46.801] Loaded PowerVR consumer services. [2025-09-24 12:45:46.913] Waiting data available... [2025-09-24 12:45:46.929] 512+0 records in [2025-09-24 12:45:46.929] 512+0 records out [2025-09-24 12:45:46.993] Starting syslogd/klogd: done [2025-09-24 12:45:47.009] DML Start [2025-09-24 12:45:47.168] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:45:47.408] DML res1: 0 [2025-09-24 12:45:47.808] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:45:47.829] Read Success [2025-09-24 12:45:47.829] Verifying certificate... [2025-09-24 12:45:48.101] Verified OK [2025-09-24 12:45:48.117] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:45:49.716] Verified OK [2025-09-24 12:45:49.716] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:45:50.323] Verified OK [2025-09-24 12:45:50.339] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:45:53.025] fs.protected_hardlinks = 1 [2025-09-24 12:45:53.041] fs.protected_symlinks = 1 [2025-09-24 12:45:53.041] kernel.modules_disabled = 1 [2025-09-24 12:45:53.249] [2025-09-24 12:45:53.249] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:45:54.476] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:46:02.185] SBL1:1210.0.1.0 [2025-09-24 12:46:02.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:46:03.799] SBL2:1210.0.1.0 [2025-09-24 12:46:03.831] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:46:03.944] j-A [2025-09-24 12:46:11.313] The R5 Autosar Classic is running [2025-09-24 12:46:11.313] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:46:11.313] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:46:11.920] INIT: version 2.96 booting [2025-09-24 12:46:12.033] INIT: Entering runlevel: 5 [2025-09-24 12:46:12.192] mtd24 attached [2025-09-24 12:46:12.192] mtd32 attached [2025-09-24 12:46:12.208] mtd28 attached [2025-09-24 12:46:12.240] ubi0:textures is mounted. [2025-09-24 12:46:12.256] RTNETLINK answers: File exists [2025-09-24 12:46:12.321] ubi2:animations is mounted. [2025-09-24 12:46:12.321] ubi1:dml_code is mounted. [2025-09-24 12:46:12.321] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:46:12.321] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:46:12.321] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:46:12.321] data.LB_FadeInType0=100 [2025-09-24 12:46:12.321] data.CHLH_FadeInType0=0 [2025-09-24 12:46:12.321] data.WU_FadeInDelay=0 [2025-09-24 12:46:12.321] max_time_out=0 [2025-09-24 12:46:12.321] No splash screen [2025-09-24 12:46:12.321] stop dss Done [2025-09-24 12:46:12.321] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:46:12.321] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:46:12.391] /dev/mem opened. [2025-09-24 12:46:12.391] Memory mapped at address 0xffffa3d48000. [2025-09-24 12:46:12.391] Read at address 0x00600018 (0xffffa3d48018): 0x00000000 [2025-09-24 12:46:12.391] Write at address 0x00600018 (0xffffa3d48018): 0x00400040, readback 0x00400040 [2025-09-24 12:46:12.391] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:46:12.407] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:46:12.535] Loaded PowerVR consumer services. [2025-09-24 12:46:12.647] Waiting data available... [2025-09-24 12:46:12.663] 512+0 records in [2025-09-24 12:46:12.663] 512+0 records out [2025-09-24 12:46:12.679] Starting syslogd/klogd: done [2025-09-24 12:46:12.695] DML Start [2025-09-24 12:46:12.918] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:46:13.143] DML res1: 0 [2025-09-24 12:46:13.569] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:46:13.569] Read Success [2025-09-24 12:46:13.569] Verifying certificate... [2025-09-24 12:46:13.776] Verified OK [2025-09-24 12:46:13.792] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:46:15.391] Verified OK [2025-09-24 12:46:15.391] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:46:16.015] Verified OK [2025-09-24 12:46:16.015] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:46:18.813] fs.protected_hardlinks = 1 [2025-09-24 12:46:18.813] fs.protected_symlinks = 1 [2025-09-24 12:46:18.828] kernel.modules_disabled = 1 [2025-09-24 12:46:19.020] [2025-09-24 12:46:19.020] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:46:20.206] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:46:27.891] SBL1:1210.0.1.0 [2025-09-24 12:46:27.923] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:46:29.506] SBL2:1210.0.1.0 [2025-09-24 12:46:29.538] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:46:29.651] j-A [2025-09-24 12:46:37.021] The R5 Autosar Classic is running [2025-09-24 12:46:37.021] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:46:37.021] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:46:37.629] INIT: version 2.96 booting [2025-09-24 12:46:37.741] INIT: Entering runlevel: 5 [2025-09-24 12:46:37.901] mtd32 attached [2025-09-24 12:46:37.901] mtd24 attached [2025-09-24 12:46:37.933] mtd28 attached [2025-09-24 12:46:38.024] ubi0:dml_code is mounted. [2025-09-24 12:46:38.024] ubi1:textures is mounted. [2025-09-24 12:46:38.024] RTNETLINK answers: File exists [2025-09-24 12:46:38.024] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:46:38.024] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:46:38.024] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:46:38.024] ubi2:animations is mounted. [2025-09-24 12:46:38.024] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:46:38.024] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:46:38.024] data.LB_FadeInType0=100 [2025-09-24 12:46:38.024] data.CHLH_FadeInType0=0 [2025-09-24 12:46:38.024] data.WU_FadeInDelay=0 [2025-09-24 12:46:38.024] max_time_out=0 [2025-09-24 12:46:38.024] No splash screen [2025-09-24 12:46:38.024] stop dss Done [2025-09-24 12:46:38.039] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:46:38.062] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:46:38.101] /dev/mem opened. [2025-09-24 12:46:38.101] Memory mapped at address 0xffffbe835000. [2025-09-24 12:46:38.101] Read at address 0x00600018 (0xffffbe835018): 0x00000000 [2025-09-24 12:46:38.101] Write at address 0x00600018 (0xffffbe835018): 0x00400040, readback 0x00400040 [2025-09-24 12:46:38.229] Loaded PowerVR consumer services. [2025-09-24 12:46:38.357] Waiting data available... [2025-09-24 12:46:38.373] 512+0 records in [2025-09-24 12:46:38.373] 512+0 records out [2025-09-24 12:46:38.405] Starting syslogd/klogd: done [2025-09-24 12:46:38.437] DML Start [2025-09-24 12:46:38.580] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:46:38.820] DML res1: 0 [2025-09-24 12:46:39.316] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:46:39.316] Read Success [2025-09-24 12:46:39.332] Verifying certificate... [2025-09-24 12:46:39.572] Verified OK [2025-09-24 12:46:39.588] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:46:41.276] Verified OK [2025-09-24 12:46:41.276] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:46:41.897] Verified OK [2025-09-24 12:46:41.897] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:46:44.487] fs.protected_hardlinks = 1 [2025-09-24 12:46:44.487] fs.protected_symlinks = 1 [2025-09-24 12:46:44.503] kernel.modules_disabled = 1 [2025-09-24 12:46:44.695] [2025-09-24 12:46:44.695] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:46:45.878] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:46:53.594] SBL1:1210.0.1.0 [2025-09-24 12:46:53.641] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:46:55.209] SBL2:1210.0.1.0 [2025-09-24 12:46:55.257] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:46:55.352] j-A [2025-09-24 12:47:02.706] The R5 Autosar Classic is running [2025-09-24 12:47:02.730] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:47:02.730] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:47:03.338] INIT: version 2.96 booting [2025-09-24 12:47:03.449] INIT: Entering runlevel: 5 [2025-09-24 12:47:03.594] mtd28 attached [2025-09-24 12:47:03.610] mtd24 attached [2025-09-24 12:47:03.626] mtd32 attached [2025-09-24 12:47:03.730] RTNETLINK answers: File exists [2025-09-24 12:47:03.730] ubi0:animations is mounted. [2025-09-24 12:47:03.730] ubi1:textures is mounted. [2025-09-24 12:47:03.730] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:47:03.730] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:47:03.730] ubi2:dml_code is mounted. [2025-09-24 12:47:03.730] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:47:03.730] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:47:03.730] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:47:03.730] data.LB_FadeInType0=100 [2025-09-24 12:47:03.730] data.CHLH_FadeInType0=0 [2025-09-24 12:47:03.730] data.WU_FadeInDelay=0 [2025-09-24 12:47:03.730] max_time_out=0 [2025-09-24 12:47:03.730] No splash screen [2025-09-24 12:47:03.730] stop dss Done [2025-09-24 12:47:03.789] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:47:03.789] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:47:03.789] /dev/mem opened. [2025-09-24 12:47:03.789] Memory mapped at address 0xffffb8a9f000. [2025-09-24 12:47:03.815] Read at address 0x00600018 (0xffffb8a9f018): 0x00000000 [2025-09-24 12:47:03.815] Write at address 0x00600018 (0xffffb8a9f018): 0x00400040, readback 0x00400040 [2025-09-24 12:47:04.023] Loaded PowerVR consumer services. [2025-09-24 12:47:04.094] Waiting data available... [2025-09-24 12:47:04.094] 512+0 records in [2025-09-24 12:47:04.094] 512+0 records out [2025-09-24 12:47:04.126] Starting syslogd/klogd: done [2025-09-24 12:47:04.142] DML Start [2025-09-24 12:47:04.334] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:47:04.557] DML res1: 0 [2025-09-24 12:47:05.001] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:47:05.001] Read Success [2025-09-24 12:47:05.001] Verifying certificate... [2025-09-24 12:47:05.224] Verified OK [2025-09-24 12:47:05.240] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:47:06.935] Verified OK [2025-09-24 12:47:06.935] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:47:07.572] Verified OK [2025-09-24 12:47:07.572] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:47:10.129] fs.protected_hardlinks = 1 [2025-09-24 12:47:10.145] fs.protected_symlinks = 1 [2025-09-24 12:47:10.145] kernel.modules_disabled = 1 [2025-09-24 12:47:10.337] [2025-09-24 12:47:10.337] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:47:11.629] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:47:19.313] SBL1:1210.0.1.0 [2025-09-24 12:47:19.361] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:47:20.929] SBL2:1210.0.1.0 [2025-09-24 12:47:20.976] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:47:21.072] j-A [2025-09-24 12:47:28.426] The R5 Autosar Classic is running [2025-09-24 12:47:28.449] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:47:28.449] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:47:29.057] INIT: version 2.96 booting [2025-09-24 12:47:29.169] INIT: Entering runlevel: 5 [2025-09-24 12:47:29.329] mtd32 attached [2025-09-24 12:47:29.345] mtd28 attached [2025-09-24 12:47:29.345] mtd24 attached [2025-09-24 12:47:29.393] ubi0:dml_code is mounted. [2025-09-24 12:47:29.441] RTNETLINK answers: File exists [2025-09-24 12:47:29.441] ubi2:textures is mounted. [2025-09-24 12:47:29.441] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:47:29.441] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:47:29.441] ubi1:animations is mounted. [2025-09-24 12:47:29.441] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:47:29.441] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:47:29.441] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:47:29.441] data.LB_FadeInType0=100 [2025-09-24 12:47:29.462] data.CHLH_FadeInType0=0 [2025-09-24 12:47:29.462] data.WU_FadeInDelay=0 [2025-09-24 12:47:29.462] max_time_out=0 [2025-09-24 12:47:29.462] No splash screen [2025-09-24 12:47:29.462] stop dss Done [2025-09-24 12:47:29.555] /dev/mem opened. [2025-09-24 12:47:29.555] Memory mapped at address 0xffffab529000. [2025-09-24 12:47:29.555] Read at address 0x00600018 (0xffffab529018): 0x00000000 [2025-09-24 12:47:29.555] Write at address 0x00600018 (0xffffab529018): 0x00400040, readback 0x00400040 [2025-09-24 12:47:29.555] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:47:29.555] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:47:29.715] Loaded PowerVR consumer services. [2025-09-24 12:47:29.795] 512+0 records in [2025-09-24 12:47:29.795] 512+0 records out [2025-09-24 12:47:29.811] Waiting data available... [2025-09-24 12:47:29.843] Starting syslogd/klogd: done [2025-09-24 12:47:29.859] DML Start [2025-09-24 12:47:30.035] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:47:30.275] DML res1: 0 [2025-09-24 12:47:30.730] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:47:30.730] Read Success [2025-09-24 12:47:30.730] Verifying certificate... [2025-09-24 12:47:30.955] Verified OK [2025-09-24 12:47:30.971] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:47:32.674] Verified OK [2025-09-24 12:47:32.674] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:47:33.296] Verified OK [2025-09-24 12:47:33.296] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:47:35.839] fs.protected_hardlinks = 1 [2025-09-24 12:47:35.855] fs.protected_symlinks = 1 [2025-09-24 12:47:35.855] kernel.modules_disabled = 1 [2025-09-24 12:47:36.063] [2025-09-24 12:47:36.063] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:47:37.366] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:47:45.032] SBL1:1210.0.1.0 [2025-09-24 12:47:45.080] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:47:46.648] SBL2:1210.0.1.0 [2025-09-24 12:47:46.695] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:47:46.791] j-A [2025-09-24 12:47:54.146] The R5 Autosar Classic is running [2025-09-24 12:47:54.146] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:47:54.167] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:47:54.774] INIT: version 2.96 booting [2025-09-24 12:47:54.886] INIT: Entering runlevel: 5 [2025-09-24 12:47:55.030] mtd24 attached [2025-09-24 12:47:55.046] mtd32 attached [2025-09-24 12:47:55.062] mtd28 attached [2025-09-24 12:47:55.078] ubi0:textures is mounted. [2025-09-24 12:47:55.165] RTNETLINK answers: File exists [2025-09-24 12:47:55.165] ubi1:dml_code is mounted. [2025-09-24 12:47:55.165] ubi2:animations is mounted. [2025-09-24 12:47:55.165] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:47:55.165] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:47:55.165] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:47:55.165] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:47:55.165] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:47:55.165] data.LB_FadeInType0=100 [2025-09-24 12:47:55.165] data.CHLH_FadeInType0=0 [2025-09-24 12:47:55.165] data.WU_FadeInDelay=0 [2025-09-24 12:47:55.165] max_time_out=0 [2025-09-24 12:47:55.165] No splash screen [2025-09-24 12:47:55.165] stop dss Done [2025-09-24 12:47:55.212] /dev/mem opened. [2025-09-24 12:47:55.212] Memory mapped at address 0xffff80081000. [2025-09-24 12:47:55.245] Read at address 0x00600018 (0xffff80081018): 0x00000000 [2025-09-24 12:47:55.245] Write at address 0x00600018 (0xffff80081018): 0x00400040, readback 0x00400040 [2025-09-24 12:47:55.245] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:47:55.245] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:47:55.469] Loaded PowerVR consumer services. [2025-09-24 12:47:55.500] Waiting data available... [2025-09-24 12:47:55.500] 512+0 records in [2025-09-24 12:47:55.516] 512+0 records out [2025-09-24 12:47:55.548] Starting syslogd/klogd: done [2025-09-24 12:47:55.581] DML Start [2025-09-24 12:47:55.709] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:47:55.917] DML res1: 0 [2025-09-24 12:47:56.487] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:47:56.487] Read Success [2025-09-24 12:47:56.487] Verifying certificate... [2025-09-24 12:47:56.727] Verified OK [2025-09-24 12:47:56.743] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:47:58.422] Verified OK [2025-09-24 12:47:58.422] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:47:59.035] Verified OK [2025-09-24 12:47:59.035] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:48:01.545] fs.protected_hardlinks = 1 [2025-09-24 12:48:01.561] fs.protected_symlinks = 1 [2025-09-24 12:48:01.561] kernel.modules_disabled = 1 [2025-09-24 12:48:01.752] [2025-09-24 12:48:01.752] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:48:03.052] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:48:10.763] SBL1:1210.0.1.0 [2025-09-24 12:48:10.795] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:48:12.378] SBL2:1210.0.1.0 [2025-09-24 12:48:12.410] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:48:12.522] j-A [2025-09-24 12:48:19.895] The R5 Autosar Classic is running [2025-09-24 12:48:19.895] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:48:19.895] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:48:20.503] INIT: version 2.96 booting [2025-09-24 12:48:20.615] INIT: Entering runlevel: 5 [2025-09-24 12:48:20.759] mtd24 attached [2025-09-24 12:48:20.775] mtd28 attached [2025-09-24 12:48:20.791] mtd32 attached [2025-09-24 12:48:20.839] ubi0:textures is mounted. [2025-09-24 12:48:20.839] RTNETLINK answers: File exists [2025-09-24 12:48:20.875] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:48:20.875] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:48:20.875] ubi2:dml_code is mounted. [2025-09-24 12:48:20.875] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:48:20.875] ubi1:animations is mounted. [2025-09-24 12:48:20.875] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:48:20.875] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:48:20.891] data.LB_FadeInType0=100 [2025-09-24 12:48:20.891] data.CHLH_FadeInType0=0 [2025-09-24 12:48:20.912] data.WU_FadeInDelay=0 [2025-09-24 12:48:20.912] max_time_out=0 [2025-09-24 12:48:20.912] No splash screen [2025-09-24 12:48:20.912] stop dss Done [2025-09-24 12:48:20.944] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:48:20.977] /dev/mem opened. [2025-09-24 12:48:20.977] Memory mapped at address 0xffff9e8f9000. [2025-09-24 12:48:20.977] Read at address 0x00600018 (0xffff9e8f9018): 0x00000000 [2025-09-24 12:48:20.977] Write at address 0x00600018 (0xffff9e8f9018): 0x00400040, readback 0x00400040 [2025-09-24 12:48:20.977] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:48:21.217] Loaded PowerVR consumer services. [2025-09-24 12:48:21.233] Waiting data available... [2025-09-24 12:48:21.249] 512+0 records in [2025-09-24 12:48:21.265] 512+0 records out [2025-09-24 12:48:21.281] Starting syslogd/klogd: done [2025-09-24 12:48:21.312] DML Start [2025-09-24 12:48:21.472] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:48:21.664] DML res1: 0 [2025-09-24 12:48:22.232] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:48:22.232] Read Success [2025-09-24 12:48:22.232] Verifying certificate... [2025-09-24 12:48:22.504] Verified OK [2025-09-24 12:48:22.519] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:48:24.275] Verified OK [2025-09-24 12:48:24.275] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:48:24.802] Verified OK [2025-09-24 12:48:24.818] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:48:27.281] fs.protected_hardlinks = 1 [2025-09-24 12:48:27.281] fs.protected_symlinks = 1 [2025-09-24 12:48:27.296] kernel.modules_disabled = 1 [2025-09-24 12:48:27.504] [2025-09-24 12:48:27.504] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:48:28.749] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:48:36.482] SBL1:1210.0.1.0 [2025-09-24 12:48:36.530] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:48:38.097] SBL2:1210.0.1.0 [2025-09-24 12:48:38.145] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:48:38.240] j-A [2025-09-24 12:48:45.595] The R5 Autosar Classic is running [2025-09-24 12:48:45.618] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:48:45.618] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:48:46.225] INIT: version 2.96 booting [2025-09-24 12:48:46.336] INIT: Entering runlevel: 5 [2025-09-24 12:48:46.497] mtd24 attached [2025-09-24 12:48:46.513] mtd32 attached [2025-09-24 12:48:46.513] mtd28 attached [2025-09-24 12:48:46.545] ubi0:textures is mounted. [2025-09-24 12:48:46.561] RTNETLINK answers: File exists [2025-09-24 12:48:46.619] ubi2:animations is mounted. [2025-09-24 12:48:46.619] ubi1:dml_code is mounted. [2025-09-24 12:48:46.619] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:48:46.619] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:48:46.619] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:48:46.619] data.LB_FadeInType0=100 [2025-09-24 12:48:46.619] data.CHLH_FadeInType0=0 [2025-09-24 12:48:46.619] data.WU_FadeInDelay=0 [2025-09-24 12:48:46.619] max_time_out=0 [2025-09-24 12:48:46.619] No splash screen [2025-09-24 12:48:46.619] stop dss Done [2025-09-24 12:48:46.619] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:48:46.634] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:48:46.686] /dev/mem opened. [2025-09-24 12:48:46.686] Memory mapped at address 0xffff8b0a4000. [2025-09-24 12:48:46.686] Read at address 0x00600018 (0xffff8b0a4018): 0x00000000 [2025-09-24 12:48:46.686] Write at address 0x00600018 (0xffff8b0a4018): 0x00400040, readback 0x00400040 [2025-09-24 12:48:46.734] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:48:46.751] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:48:46.942] Loaded PowerVR consumer services. [2025-09-24 12:48:46.942] Waiting data available... [2025-09-24 12:48:46.974] 512+0 records in [2025-09-24 12:48:46.974] 512+0 records out [2025-09-24 12:48:47.006] Starting syslogd/klogd: done [2025-09-24 12:48:47.022] DML Start [2025-09-24 12:48:47.166] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:48:47.422] DML res1: 0 [2025-09-24 12:48:47.868] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:48:47.868] Read Success [2025-09-24 12:48:47.868] Verifying certificate... [2025-09-24 12:48:48.108] Verified OK [2025-09-24 12:48:48.108] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:48:49.674] Verified OK [2025-09-24 12:48:49.695] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:48:50.284] Verified OK [2025-09-24 12:48:50.284] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:48:52.841] fs.protected_hardlinks = 1 [2025-09-24 12:48:52.841] fs.protected_symlinks = 1 [2025-09-24 12:48:52.857] kernel.modules_disabled = 1 [2025-09-24 12:48:53.049] [2025-09-24 12:48:53.049] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:48:54.511] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:49:02.205] SBL1:1210.0.1.0 [2025-09-24 12:49:02.253] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:49:03.820] SBL2:1210.0.1.0 [2025-09-24 12:49:03.852] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:49:03.965] j-A [2025-09-24 12:49:11.339] The R5 Autosar Classic is running [2025-09-24 12:49:11.339] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:49:11.339] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:49:11.947] INIT: version 2.96 booting [2025-09-24 12:49:12.059] INIT: Entering runlevel: 5 [2025-09-24 12:49:12.203] mtd24 attached [2025-09-24 12:49:12.218] mtd32 attached [2025-09-24 12:49:12.234] mtd28 attached [2025-09-24 12:49:12.250] ubi0:textures is mounted. [2025-09-24 12:49:12.337] RTNETLINK answers: File exists [2025-09-24 12:49:12.337] ubi1:dml_code is mounted. [2025-09-24 12:49:12.337] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:49:12.337] ubi2:animations is mounted. [2025-09-24 12:49:12.337] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:49:12.337] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:49:12.337] data.LB_FadeInType0=100 [2025-09-24 12:49:12.337] data.CHLH_FadeInType0=0 [2025-09-24 12:49:12.337] data.WU_FadeInDelay=0 [2025-09-24 12:49:12.337] max_time_out=0 [2025-09-24 12:49:12.337] No splash screen [2025-09-24 12:49:12.337] stop dss Done [2025-09-24 12:49:12.337] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:49:12.337] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:49:12.385] /dev/mem opened. [2025-09-24 12:49:12.385] Memory mapped at address 0xffffa7cd7000. [2025-09-24 12:49:12.418] Read at address 0x00600018 (0xffffa7cd7018): 0x00000000 [2025-09-24 12:49:12.418] Write at address 0x00600018 (0xffffa7cd7018): 0x00400040, readback 0x00400040 [2025-09-24 12:49:12.418] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:49:12.418] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:49:12.514] Loaded PowerVR consumer services. [2025-09-24 12:49:12.668] Waiting data available... [2025-09-24 12:49:12.668] 512+0 records in [2025-09-24 12:49:12.668] 512+0 records out [2025-09-24 12:49:12.699] Starting syslogd/klogd: done [2025-09-24 12:49:12.732] DML Start [2025-09-24 12:49:12.875] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:49:13.051] DML res1: 0 [2025-09-24 12:49:13.697] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:49:13.697] Read Success [2025-09-24 12:49:13.697] Verifying certificate... [2025-09-24 12:49:13.921] Verified OK [2025-09-24 12:49:13.936] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:49:15.580] Verified OK [2025-09-24 12:49:15.580] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:49:16.146] Verified OK [2025-09-24 12:49:16.146] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:49:18.625] fs.protected_hardlinks = 1 [2025-09-24 12:49:18.640] fs.protected_symlinks = 1 [2025-09-24 12:49:18.640] kernel.modules_disabled = 1 [2025-09-24 12:49:18.816] [2025-09-24 12:49:18.816] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:49:20.174] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:49:27.910] SBL1:1210.0.1.0 [2025-09-24 12:49:27.942] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:49:29.525] SBL2:1210.0.1.0 [2025-09-24 12:49:29.557] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:49:29.669] j-A [2025-09-24 12:49:37.042] The R5 Autosar Classic is running [2025-09-24 12:49:37.043] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:49:37.043] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:49:37.650] INIT: version 2.96 booting [2025-09-24 12:49:37.761] INIT: Entering runlevel: 5 [2025-09-24 12:49:37.922] mtd24 attached [2025-09-24 12:49:37.922] mtd28 attached [2025-09-24 12:49:37.937] mtd32 attached [2025-09-24 12:49:37.969] ubi0:textures is mounted. [2025-09-24 12:49:37.985] RTNETLINK answers: File exists [2025-09-24 12:49:37.985] ubi1:animations is mounted. [2025-09-24 12:49:38.045] ubi2:dml_code is mounted. [2025-09-24 12:49:38.045] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:49:38.045] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:49:38.045] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:49:38.045] data.LB_FadeInType0=100 [2025-09-24 12:49:38.045] data.CHLH_FadeInType0=0 [2025-09-24 12:49:38.045] data.WU_FadeInDelay=0 [2025-09-24 12:49:38.045] max_time_out=0 [2025-09-24 12:49:38.045] No splash screen [2025-09-24 12:49:38.045] stop dss Done [2025-09-24 12:49:38.045] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:49:38.045] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:49:38.114] /dev/mem opened. [2025-09-24 12:49:38.114] Memory mapped at address 0xffffa9182000. [2025-09-24 12:49:38.114] Read at address 0x00600018 (0xffffa9182018): 0x00000000 [2025-09-24 12:49:38.114] Write at address 0x00600018 (0xffffa9182018): 0x00400040, readback 0x00400040 [2025-09-24 12:49:38.114] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:49:38.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:49:38.339] Loaded PowerVR consumer services. [2025-09-24 12:49:38.383] 512+0 records in [2025-09-24 12:49:38.383] 512+0 records out [2025-09-24 12:49:38.383] Waiting data available... [2025-09-24 12:49:38.399] Starting syslogd/klogd: done [2025-09-24 12:49:38.415] DML Start [2025-09-24 12:49:38.591] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:49:38.831] DML res1: 0 [2025-09-24 12:49:39.289] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:49:39.289] Read Success [2025-09-24 12:49:39.289] Verifying certificate... [2025-09-24 12:49:39.528] Verified OK [2025-09-24 12:49:39.544] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:49:41.143] Verified OK [2025-09-24 12:49:41.143] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:49:41.711] Verified OK [2025-09-24 12:49:41.711] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:49:44.458] fs.protected_hardlinks = 1 [2025-09-24 12:49:44.458] fs.protected_symlinks = 1 [2025-09-24 12:49:44.458] kernel.modules_disabled = 1 [2025-09-24 12:49:44.650] [2025-09-24 12:49:44.650] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:49:45.897] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:49:53.622] SBL1:1210.0.1.0 [2025-09-24 12:49:53.670] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:49:55.238] SBL2:1210.0.1.0 [2025-09-24 12:49:55.286] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:49:55.382] j-A [2025-09-24 12:50:02.735] The R5 Autosar Classic is running [2025-09-24 12:50:02.760] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:50:02.760] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:50:03.368] INIT: version 2.96 booting [2025-09-24 12:50:03.480] INIT: Entering runlevel: 5 [2025-09-24 12:50:03.640] mtd24 attached [2025-09-24 12:50:03.640] mtd32 attached [2025-09-24 12:50:03.655] mtd28 attached [2025-09-24 12:50:03.704] RTNETLINK answers: File exists [2025-09-24 12:50:03.772] ubi0:textures is mounted. [2025-09-24 12:50:03.772] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:50:03.772] ubi1:dml_code is mounted. [2025-09-24 12:50:03.772] ubi2:animations is mounted. [2025-09-24 12:50:03.772] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:50:03.772] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:50:03.772] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:50:03.772] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:50:03.772] data.LB_FadeInType0=100 [2025-09-24 12:50:03.772] data.CHLH_FadeInType0=0 [2025-09-24 12:50:03.772] data.WU_FadeInDelay=0 [2025-09-24 12:50:03.772] max_time_out=0 [2025-09-24 12:50:03.772] No splash screen [2025-09-24 12:50:03.772] stop dss Done [2025-09-24 12:50:03.804] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:50:03.820] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:50:03.854] /dev/mem opened. [2025-09-24 12:50:03.854] Memory mapped at address 0xffff9e63c000. [2025-09-24 12:50:03.854] Read at address 0x00600018 (0xffff9e63c018): 0x00000000 [2025-09-24 12:50:03.854] Write at address 0x00600018 (0xffff9e63c018): 0x00400040, readback 0x00400040 [2025-09-24 12:50:04.062] Loaded PowerVR consumer services. [2025-09-24 12:50:04.093] Waiting data available... [2025-09-24 12:50:04.093] 512+0 records in [2025-09-24 12:50:04.093] 512+0 records out [2025-09-24 12:50:04.141] Starting syslogd/klogd: done [2025-09-24 12:50:04.173] DML Start [2025-09-24 12:50:04.318] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:50:04.590] DML res1: 0 [2025-09-24 12:50:05.003] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:50:05.003] Read Success [2025-09-24 12:50:05.003] Verifying certificate... [2025-09-24 12:50:05.227] Verified OK [2025-09-24 12:50:05.242] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:50:06.890] Verified OK [2025-09-24 12:50:06.890] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:50:07.545] Verified OK [2025-09-24 12:50:07.545] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:50:10.200] fs.protected_hardlinks = 1 [2025-09-24 12:50:10.216] fs.protected_symlinks = 1 [2025-09-24 12:50:10.231] kernel.modules_disabled = 1 [2025-09-24 12:50:10.424] [2025-09-24 12:50:10.424] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:50:11.703] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:50:19.328] SBL1:1210.0.1.0 [2025-09-24 12:50:19.376] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:50:20.943] SBL2:1210.0.1.0 [2025-09-24 12:50:20.991] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:50:21.087] j-A [2025-09-24 12:50:28.442] The R5 Autosar Classic is running [2025-09-24 12:50:28.442] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:50:28.462] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:50:29.070] INIT: version 2.96 booting [2025-09-24 12:50:29.182] INIT: Entering runlevel: 5 [2025-09-24 12:50:29.342] mtd24 attached [2025-09-24 12:50:29.357] mtd32 attached [2025-09-24 12:50:29.374] mtd28 attached [2025-09-24 12:50:29.406] ubi0:textures is mounted. [2025-09-24 12:50:29.473] RTNETLINK answers: File exists [2025-09-24 12:50:29.473] ubi1:dml_code is mounted. [2025-09-24 12:50:29.473] ubi2:animations is mounted. [2025-09-24 12:50:29.473] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:50:29.473] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:50:29.473] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:50:29.473] data.LB_FadeInType0=100 [2025-09-24 12:50:29.473] data.CHLH_FadeInType0=0 [2025-09-24 12:50:29.473] data.WU_FadeInDelay=0 [2025-09-24 12:50:29.473] max_time_out=0 [2025-09-24 12:50:29.473] No splash screen [2025-09-24 12:50:29.473] stop dss Done [2025-09-24 12:50:29.473] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:50:29.473] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:50:29.521] /dev/mem opened. [2025-09-24 12:50:29.521] Memory mapped at address 0xffffb1909000. [2025-09-24 12:50:29.547] Read at address 0x00600018 (0xffffb1909018): 0x00000000 [2025-09-24 12:50:29.547] Write at address 0x00600018 (0xffffb1909018): 0x00400040, readback 0x00400040 [2025-09-24 12:50:29.563] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:50:29.595] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:50:29.754] Loaded PowerVR consumer services. [2025-09-24 12:50:29.813] 512+0 records in [2025-09-24 12:50:29.813] 512+0 records out [2025-09-24 12:50:29.813] Waiting data available... [2025-09-24 12:50:29.829] Starting syslogd/klogd: done [2025-09-24 12:50:29.845] DML Start [2025-09-24 12:50:30.068] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:50:30.325] DML res1: 0 [2025-09-24 12:50:30.627] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:50:30.627] Read Success [2025-09-24 12:50:30.627] Verifying certificate... [2025-09-24 12:50:30.883] Verified OK [2025-09-24 12:50:30.899] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:50:32.599] Verified OK [2025-09-24 12:50:32.599] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:50:33.262] Verified OK [2025-09-24 12:50:33.262] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:50:35.933] fs.protected_hardlinks = 1 [2025-09-24 12:50:35.949] fs.protected_symlinks = 1 [2025-09-24 12:50:35.949] kernel.modules_disabled = 1 [2025-09-24 12:50:36.140] [2025-09-24 12:50:36.140] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:50:37.362] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:50:45.037] SBL1:1210.0.1.0 [2025-09-24 12:50:45.085] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:50:46.652] SBL2:1210.0.1.0 [2025-09-24 12:50:46.700] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:50:46.796] j-A [2025-09-24 12:50:54.150] The R5 Autosar Classic is running [2025-09-24 12:50:54.172] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:50:54.172] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:50:54.779] INIT: version 2.96 booting [2025-09-24 12:50:54.892] INIT: Entering runlevel: 5 [2025-09-24 12:50:55.052] mtd24 attached [2025-09-24 12:50:55.052] mtd32 attached [2025-09-24 12:50:55.067] mtd28 attached [2025-09-24 12:50:55.115] RTNETLINK answers: File exists [2025-09-24 12:50:55.115] ubi0:textures is mounted. [2025-09-24 12:50:55.153] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:50:55.153] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:50:55.153] ubi2:animations is mounted. [2025-09-24 12:50:55.153] ubi1:dml_code is mounted. [2025-09-24 12:50:55.153] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:50:55.153] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:50:55.153] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:50:55.180] data.LB_FadeInType0=100 [2025-09-24 12:50:55.180] data.CHLH_FadeInType0=0 [2025-09-24 12:50:55.180] data.WU_FadeInDelay=0 [2025-09-24 12:50:55.180] max_time_out=0 [2025-09-24 12:50:55.180] No splash screen [2025-09-24 12:50:55.180] stop dss Done [2025-09-24 12:50:55.263] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:50:55.263] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:50:55.263] /dev/mem opened. [2025-09-24 12:50:55.263] Memory mapped at address 0xffffb7a9d000. [2025-09-24 12:50:55.263] Read at address 0x00600018 (0xffffb7a9d018): 0x00000000 [2025-09-24 12:50:55.263] Write at address 0x00600018 (0xffffb7a9d018): 0x00400040, readback 0x00400040 [2025-09-24 12:50:55.392] Loaded PowerVR consumer services. [2025-09-24 12:50:55.515] Waiting data available... [2025-09-24 12:50:55.515] 512+0 records in [2025-09-24 12:50:55.515] 512+0 records out [2025-09-24 12:50:55.531] Starting syslogd/klogd: done [2025-09-24 12:50:55.547] DML Start [2025-09-24 12:50:55.722] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:50:55.963] DML res1: 0 [2025-09-24 12:50:56.363] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:50:56.384] Read Success [2025-09-24 12:50:56.384] Verifying certificate... [2025-09-24 12:50:56.607] Verified OK [2025-09-24 12:50:56.623] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:50:58.217] Verified OK [2025-09-24 12:50:58.217] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:50:58.820] Verified OK [2025-09-24 12:50:58.820] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:51:01.618] fs.protected_hardlinks = 1 [2025-09-24 12:51:01.618] fs.protected_symlinks = 1 [2025-09-24 12:51:01.634] kernel.modules_disabled = 1 [2025-09-24 12:51:01.826] [2025-09-24 12:51:01.826] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:51:03.053] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:51:10.774] SBL1:1210.0.1.0 [2025-09-24 12:51:10.806] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:51:12.388] SBL2:1210.0.1.0 [2025-09-24 12:51:12.420] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:51:12.532] j-A [2025-09-24 12:51:19.901] The R5 Autosar Classic is running [2025-09-24 12:51:19.901] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:51:19.901] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:51:20.509] INIT: version 2.96 booting [2025-09-24 12:51:20.621] INIT: Entering runlevel: 5 [2025-09-24 12:51:20.765] mtd24 attached [2025-09-24 12:51:20.781] mtd28 attached [2025-09-24 12:51:20.797] mtd32 attached [2025-09-24 12:51:20.829] ubi0:textures is mounted. [2025-09-24 12:51:20.845] ubi1:animations is mounted. [2025-09-24 12:51:20.845] RTNETLINK answers: File exists [2025-09-24 12:51:20.905] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:51:20.905] ubi2:dml_code is mounted. [2025-09-24 12:51:20.905] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:51:20.905] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:51:20.905] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:51:20.905] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:51:20.905] data.LB_FadeInType0=100 [2025-09-24 12:51:20.905] data.CHLH_FadeInType0=0 [2025-09-24 12:51:20.905] data.WU_FadeInDelay=0 [2025-09-24 12:51:20.905] max_time_out=0 [2025-09-24 12:51:20.905] No splash screen [2025-09-24 12:51:20.905] stop dss Done [2025-09-24 12:51:20.937] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:51:20.953] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:51:20.953] /dev/mem opened. [2025-09-24 12:51:20.984] Memory mapped at address 0xffff9e8b3000. [2025-09-24 12:51:20.984] Read at address 0x00600018 (0xffff9e8b3018): 0x00000000 [2025-09-24 12:51:20.984] Write at address 0x00600018 (0xffff9e8b3018): 0x00400040, readback 0x00400040 [2025-09-24 12:51:21.209] Loaded PowerVR consumer services. [2025-09-24 12:51:21.241] Waiting data available... [2025-09-24 12:51:21.257] 512+0 records in [2025-09-24 12:51:21.257] 512+0 records out [2025-09-24 12:51:21.305] Starting syslogd/klogd: done [2025-09-24 12:51:21.321] DML Start [2025-09-24 12:51:21.496] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:51:21.720] DML res1: 0 [2025-09-24 12:51:22.238] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:51:22.238] Read Success [2025-09-24 12:51:22.238] Verifying certificate... [2025-09-24 12:51:22.479] Verified OK [2025-09-24 12:51:22.495] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:51:24.120] Verified OK [2025-09-24 12:51:24.120] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:51:24.768] Verified OK [2025-09-24 12:51:24.768] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:51:27.406] fs.protected_hardlinks = 1 [2025-09-24 12:51:27.423] fs.protected_symlinks = 1 [2025-09-24 12:51:27.423] kernel.modules_disabled = 1 [2025-09-24 12:51:27.614] [2025-09-24 12:51:27.614] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:51:28.725] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:51:36.461] SBL1:1210.0.1.0 [2025-09-24 12:51:36.509] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:51:38.076] SBL2:1210.0.1.0 [2025-09-24 12:51:38.124] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:51:38.220] j-A [2025-09-24 12:51:45.573] The R5 Autosar Classic is running [2025-09-24 12:51:45.597] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:51:45.597] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:51:46.205] INIT: version 2.96 booting [2025-09-24 12:51:46.316] INIT: Entering runlevel: 5 [2025-09-24 12:51:46.461] mtd24 attached [2025-09-24 12:51:46.477] mtd28 attached [2025-09-24 12:51:46.493] mtd32 attached [2025-09-24 12:51:46.595] RTNETLINK answers: File exists [2025-09-24 12:51:46.595] ubi0:textures is mounted. [2025-09-24 12:51:46.595] ubi1:animations is mounted. [2025-09-24 12:51:46.595] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:51:46.595] ubi2:dml_code is mounted. [2025-09-24 12:51:46.595] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:51:46.595] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:51:46.595] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:51:46.595] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:51:46.595] data.LB_FadeInType0=100 [2025-09-24 12:51:46.595] data.CHLH_FadeInType0=0 [2025-09-24 12:51:46.595] data.WU_FadeInDelay=0 [2025-09-24 12:51:46.595] max_time_out=0 [2025-09-24 12:51:46.595] No splash screen [2025-09-24 12:51:46.595] stop dss Done [2025-09-24 12:51:46.668] /dev/mem opened. [2025-09-24 12:51:46.668] Memory mapped at address 0xffffae0b6000. [2025-09-24 12:51:46.668] Read at address 0x00600018 (0xffffae0b6018): 0x00000000 [2025-09-24 12:51:46.668] Write at address 0x00600018 (0xffffae0b6018): 0x00400040, readback 0x00400040 [2025-09-24 12:51:46.668] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:51:46.668] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:51:46.908] Loaded PowerVR consumer services. [2025-09-24 12:51:46.924] Waiting data available... [2025-09-24 12:51:46.956] 512+0 records in [2025-09-24 12:51:46.956] 512+0 records out [2025-09-24 12:51:46.988] Starting syslogd/klogd: done [2025-09-24 12:51:47.004] DML Start [2025-09-24 12:51:47.180] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:51:47.420] DML res1: 0 [2025-09-24 12:51:47.836] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:51:47.852] Read Success [2025-09-24 12:51:47.852] Verifying certificate... [2025-09-24 12:51:48.139] Verified OK [2025-09-24 12:51:48.139] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:51:49.850] Verified OK [2025-09-24 12:51:49.850] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:51:50.486] Verified OK [2025-09-24 12:51:50.486] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:51:53.012] fs.protected_hardlinks = 1 [2025-09-24 12:51:53.028] fs.protected_symlinks = 1 [2025-09-24 12:51:53.028] kernel.modules_disabled = 1 [2025-09-24 12:51:53.220] [2025-09-24 12:51:53.220] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:51:54.515] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:52:02.193] SBL1:1210.0.1.0 [2025-09-24 12:52:02.225] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:52:03.808] SBL2:1210.0.1.0 [2025-09-24 12:52:03.840] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:52:03.952] j-A [2025-09-24 12:52:11.322] The R5 Autosar Classic is running [2025-09-24 12:52:11.322] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:52:11.322] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:52:11.930] INIT: version 2.96 booting [2025-09-24 12:52:12.041] INIT: Entering runlevel: 5 [2025-09-24 12:52:12.185] mtd28 attached [2025-09-24 12:52:12.201] mtd32 attached [2025-09-24 12:52:12.217] mtd24 attached [2025-09-24 12:52:12.233] ubi0:animations is mounted. [2025-09-24 12:52:12.265] RTNETLINK answers: File exists [2025-09-24 12:52:12.265] ubi1:dml_code is mounted. [2025-09-24 12:52:12.295] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:52:12.295] ubi2:textures is mounted. [2025-09-24 12:52:12.295] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:52:12.295] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:52:12.295] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:52:12.322] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:52:12.322] data.LB_FadeInType0=100 [2025-09-24 12:52:12.322] data.CHLH_FadeInType0=0 [2025-09-24 12:52:12.322] data.WU_FadeInDelay=0 [2025-09-24 12:52:12.322] max_time_out=0 [2025-09-24 12:52:12.322] No splash screen [2025-09-24 12:52:12.322] stop dss Done [2025-09-24 12:52:12.354] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:52:12.386] /dev/mem opened. [2025-09-24 12:52:12.386] Memory mapped at address 0xffffbb0c6000. [2025-09-24 12:52:12.386] Read at address 0x00600018 (0xffffbb0c6018): 0x00000000 [2025-09-24 12:52:12.386] Write at address 0x00600018 (0xffffbb0c6018): 0x00400040, readback 0x00400040 [2025-09-24 12:52:12.386] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:52:12.515] Loaded PowerVR consumer services. [2025-09-24 12:52:12.658] Waiting data available... [2025-09-24 12:52:12.658] 512+0 records in [2025-09-24 12:52:12.658] 512+0 records out [2025-09-24 12:52:12.706] Starting syslogd/klogd: done [2025-09-24 12:52:12.722] DML Start [2025-09-24 12:52:12.898] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:52:13.138] DML res1: 0 [2025-09-24 12:52:13.537] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:52:13.537] Read Success [2025-09-24 12:52:13.537] Verifying certificate... [2025-09-24 12:52:13.760] Verified OK [2025-09-24 12:52:13.776] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:52:15.465] Verified OK [2025-09-24 12:52:15.465] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:52:16.034] Verified OK [2025-09-24 12:52:16.034] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:52:18.672] fs.protected_hardlinks = 1 [2025-09-24 12:52:18.702] fs.protected_symlinks = 1 [2025-09-24 12:52:18.702] kernel.modules_disabled = 1 [2025-09-24 12:52:18.894] [2025-09-24 12:52:18.894] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:52:20.229] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:52:27.910] SBL1:1210.0.1.0 [2025-09-24 12:52:27.942] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:52:29.524] SBL2:1210.0.1.0 [2025-09-24 12:52:29.556] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:52:29.668] j-A [2025-09-24 12:52:37.042] The R5 Autosar Classic is running [2025-09-24 12:52:37.042] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:52:37.042] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:52:37.650] INIT: version 2.96 booting [2025-09-24 12:52:37.762] INIT: Entering runlevel: 5 [2025-09-24 12:52:37.906] mtd24 attached [2025-09-24 12:52:37.922] mtd28 attached [2025-09-24 12:52:37.954] mtd32 attached [2025-09-24 12:52:37.970] ubi0:textures is mounted. [2025-09-24 12:52:37.970] ubi1:animations is mounted. [2025-09-24 12:52:37.986] RTNETLINK answers: File exists [2025-09-24 12:52:38.029] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:52:38.029] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:52:38.029] ubi2:dml_code is mounted. [2025-09-24 12:52:38.029] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:52:38.029] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:52:38.029] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:52:38.029] data.LB_FadeInType0=100 [2025-09-24 12:52:38.050] data.CHLH_FadeInType0=0 [2025-09-24 12:52:38.050] data.WU_FadeInDelay=0 [2025-09-24 12:52:38.050] max_time_out=0 [2025-09-24 12:52:38.050] No splash screen [2025-09-24 12:52:38.050] stop dss Done [2025-09-24 12:52:38.082] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:52:38.098] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:52:38.098] /dev/mem opened. [2025-09-24 12:52:38.130] Memory mapped at address 0xffffbc835000. [2025-09-24 12:52:38.130] Read at address 0x00600018 (0xffffbc835018): 0x00000000 [2025-09-24 12:52:38.130] Write at address 0x00600018 (0xffffbc835018): 0x00400040, readback 0x00400040 [2025-09-24 12:52:38.338] Loaded PowerVR consumer services. [2025-09-24 12:52:38.386] 512+0 records in [2025-09-24 12:52:38.386] 512+0 records out [2025-09-24 12:52:38.418] Waiting data available... [2025-09-24 12:52:38.433] Starting syslogd/klogd: done [2025-09-24 12:52:38.449] DML Start [2025-09-24 12:52:38.642] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:52:38.881] DML res1: 0 [2025-09-24 12:52:39.257] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:52:39.257] Read Success [2025-09-24 12:52:39.257] Verifying certificate... [2025-09-24 12:52:39.528] Verified OK [2025-09-24 12:52:39.560] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:52:41.187] Verified OK [2025-09-24 12:52:41.187] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:52:41.763] Verified OK [2025-09-24 12:52:41.763] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:52:44.352] fs.protected_hardlinks = 1 [2025-09-24 12:52:44.352] fs.protected_symlinks = 1 [2025-09-24 12:52:44.368] kernel.modules_disabled = 1 [2025-09-24 12:52:44.560] [2025-09-24 12:52:44.560] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:52:45.983] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:52:53.627] SBL1:1210.0.1.0 [2025-09-24 12:52:53.675] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:52:55.242] SBL2:1210.0.1.0 [2025-09-24 12:52:55.290] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:52:55.386] j-A [2025-09-24 12:53:02.740] The R5 Autosar Classic is running [2025-09-24 12:53:02.740] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:53:02.761] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:53:03.369] INIT: version 2.96 booting [2025-09-24 12:53:03.480] INIT: Entering runlevel: 5 [2025-09-24 12:53:03.641] mtd32 attached [2025-09-24 12:53:03.641] mtd24 attached [2025-09-24 12:53:03.657] mtd28 attached [2025-09-24 12:53:03.705] ubi0:dml_code is mounted. [2025-09-24 12:53:03.705] ubi1:textures is mounted. [2025-09-24 12:53:03.742] ubi2:animations is mounted. [2025-09-24 12:53:03.742] RTNETLINK answers: File exists [2025-09-24 12:53:03.742] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:53:03.742] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:53:03.742] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:53:03.742] data.LB_FadeInType0=100 [2025-09-24 12:53:03.773] data.CHLH_FadeInType0=0 [2025-09-24 12:53:03.773] data.WU_FadeInDelay=0 [2025-09-24 12:53:03.773] max_time_out=0 [2025-09-24 12:53:03.773] No splash screen [2025-09-24 12:53:03.773] stop dss Done [2025-09-24 12:53:03.774] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:53:03.774] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:53:03.821] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:53:03.821] /dev/mem opened. [2025-09-24 12:53:03.853] Memory mapped at address 0xffffbec50000. [2025-09-24 12:53:03.853] Read at address 0x00600018 (0xffffbec50018): 0x00000000 [2025-09-24 12:53:03.853] Write at address 0x00600018 (0xffffbec50018): 0x00400040, readback 0x00400040 [2025-09-24 12:53:03.853] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:53:03.965] Loaded PowerVR consumer services. [2025-09-24 12:53:04.106] Waiting data available... [2025-09-24 12:53:04.106] 512+0 records in [2025-09-24 12:53:04.106] 512+0 records out [2025-09-24 12:53:04.122] Starting syslogd/klogd: done [2025-09-24 12:53:04.138] DML Start [2025-09-24 12:53:04.330] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:53:04.537] DML res1: 0 [2025-09-24 12:53:04.986] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:53:04.986] Read Success [2025-09-24 12:53:05.002] Verifying certificate... [2025-09-24 12:53:05.256] Verified OK [2025-09-24 12:53:05.272] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:53:06.840] Verified OK [2025-09-24 12:53:06.840] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:53:07.460] Verified OK [2025-09-24 12:53:07.460] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:53:10.210] fs.protected_hardlinks = 1 [2025-09-24 12:53:10.226] fs.protected_symlinks = 1 [2025-09-24 12:53:10.226] kernel.modules_disabled = 1 [2025-09-24 12:53:10.418] [2025-09-24 12:53:10.418] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:53:11.628] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:53:19.338] SBL1:1210.0.1.0 [2025-09-24 12:53:19.386] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:53:20.952] SBL2:1210.0.1.0 [2025-09-24 12:53:21.000] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:53:21.096] j-A [2025-09-24 12:53:28.451] The R5 Autosar Classic is running [2025-09-24 12:53:28.451] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:53:28.472] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:53:29.080] INIT: version 2.96 booting [2025-09-24 12:53:29.191] INIT: Entering runlevel: 5 [2025-09-24 12:53:29.352] mtd28 attached [2025-09-24 12:53:29.352] mtd24 attached [2025-09-24 12:53:29.368] mtd32 attached [2025-09-24 12:53:29.400] ubi0:animations is mounted. [2025-09-24 12:53:29.416] RTNETLINK answers: File exists [2025-09-24 12:53:29.477] ubi1:textures is mounted. [2025-09-24 12:53:29.477] ubi2:dml_code is mounted. [2025-09-24 12:53:29.477] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:53:29.477] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:53:29.477] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:53:29.477] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:53:29.477] data.LB_FadeInType0=100 [2025-09-24 12:53:29.477] data.CHLH_FadeInType0=0 [2025-09-24 12:53:29.477] data.WU_FadeInDelay=0 [2025-09-24 12:53:29.477] max_time_out=0 [2025-09-24 12:53:29.477] No splash screen [2025-09-24 12:53:29.477] stop dss Done [2025-09-24 12:53:29.477] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:53:29.551] /dev/mem opened. [2025-09-24 12:53:29.551] Memory mapped at address 0xffffa852e000. [2025-09-24 12:53:29.551] Read at address 0x00600018 (0xffffa852e018): 0x00000000 [2025-09-24 12:53:29.551] Write at address 0x00600018 (0xffffa852e018): 0x00400040, readback 0x00400040 [2025-09-24 12:53:29.551] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:53:29.551] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:53:29.663] Loaded PowerVR consumer services. [2025-09-24 12:53:29.814] Waiting data available... [2025-09-24 12:53:29.814] 512+0 records in [2025-09-24 12:53:29.814] 512+0 records out [2025-09-24 12:53:29.846] Starting syslogd/klogd: done [2025-09-24 12:53:29.862] DML Start [2025-09-24 12:53:30.023] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:53:30.246] DML res1: 0 [2025-09-24 12:53:30.768] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:53:30.768] Read Success [2025-09-24 12:53:30.768] Verifying certificate... [2025-09-24 12:53:31.071] Verified OK [2025-09-24 12:53:31.103] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:53:32.791] Verified OK [2025-09-24 12:53:32.791] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:53:33.302] Verified OK [2025-09-24 12:53:33.318] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:53:35.796] fs.protected_hardlinks = 1 [2025-09-24 12:53:35.813] fs.protected_symlinks = 1 [2025-09-24 12:53:35.813] kernel.modules_disabled = 1 [2025-09-24 12:53:36.020] [2025-09-24 12:53:36.020] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:53:37.339] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:53:45.042] SBL1:1210.0.1.0 [2025-09-24 12:53:45.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:53:46.656] SBL2:1210.0.1.0 [2025-09-24 12:53:46.704] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:53:46.801] j-A [2025-09-24 12:53:54.156] The R5 Autosar Classic is running [2025-09-24 12:53:54.179] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:53:54.179] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:53:54.786] INIT: version 2.96 booting [2025-09-24 12:53:54.898] INIT: Entering runlevel: 5 [2025-09-24 12:53:55.059] mtd32 attached [2025-09-24 12:53:55.059] mtd24 attached [2025-09-24 12:53:55.074] mtd28 attached [2025-09-24 12:53:55.122] RTNETLINK answers: File exists [2025-09-24 12:53:55.186] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:53:55.186] ubi2:animations is mounted. [2025-09-24 12:53:55.186] ubi0:dml_code is mounted. [2025-09-24 12:53:55.186] ubi1:textures is mounted. [2025-09-24 12:53:55.186] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:53:55.186] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:53:55.186] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:53:55.186] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:53:55.186] data.LB_FadeInType0=100 [2025-09-24 12:53:55.186] data.CHLH_FadeInType0=0 [2025-09-24 12:53:55.186] data.WU_FadeInDelay=0 [2025-09-24 12:53:55.186] max_time_out=0 [2025-09-24 12:53:55.186] No splash screen [2025-09-24 12:53:55.186] stop dss Done [2025-09-24 12:53:55.266] /dev/mem opened. [2025-09-24 12:53:55.266] Memory mapped at address 0xffff9d18b000. [2025-09-24 12:53:55.266] Read at address 0x00600018 (0xffff9d18b018): 0x00000000 [2025-09-24 12:53:55.266] Write at address 0x00600018 (0xffff9d18b018): 0x00400040, readback 0x00400040 [2025-09-24 12:53:55.266] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:53:55.266] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:53:55.426] Loaded PowerVR consumer services. [2025-09-24 12:53:55.537] Waiting data available... [2025-09-24 12:53:55.537] 512+0 records in [2025-09-24 12:53:55.553] 512+0 records out [2025-09-24 12:53:55.585] Starting syslogd/klogd: done [2025-09-24 12:53:55.602] DML Start [2025-09-24 12:53:55.793] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:53:56.065] DML res1: 0 [2025-09-24 12:53:56.399] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:53:56.399] Read Success [2025-09-24 12:53:56.399] Verifying certificate... [2025-09-24 12:53:56.623] Verified OK [2025-09-24 12:53:56.623] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:53:58.189] Verified OK [2025-09-24 12:53:58.189] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:53:58.854] Verified OK [2025-09-24 12:53:58.854] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:54:01.588] fs.protected_hardlinks = 1 [2025-09-24 12:54:01.588] fs.protected_symlinks = 1 [2025-09-24 12:54:01.604] kernel.modules_disabled = 1 [2025-09-24 12:54:01.796] [2025-09-24 12:54:01.796] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:54:03.120] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:54:10.760] SBL1:1210.0.1.0 [2025-09-24 12:54:10.808] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:54:12.375] SBL2:1210.0.1.0 [2025-09-24 12:54:12.423] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:54:12.519] j-A [2025-09-24 12:54:19.874] The R5 Autosar Classic is running [2025-09-24 12:54:19.896] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:54:19.896] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:54:20.504] INIT: version 2.96 booting [2025-09-24 12:54:20.615] INIT: Entering runlevel: 5 [2025-09-24 12:54:20.776] mtd32 attached [2025-09-24 12:54:20.776] mtd28 attached [2025-09-24 12:54:20.792] mtd24 attached [2025-09-24 12:54:20.839] RTNETLINK answers: File exists [2025-09-24 12:54:20.875] ubi1:animations is mounted. [2025-09-24 12:54:20.875] ubi2:textures is mounted. [2025-09-24 12:54:20.875] ubi0:dml_code is mounted. [2025-09-24 12:54:20.875] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:54:20.875] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:54:20.875] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:54:20.875] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:54:20.875] data.LB_FadeInType0=100 [2025-09-24 12:54:20.901] data.CHLH_FadeInType0=0 [2025-09-24 12:54:20.901] data.WU_FadeInDelay=0 [2025-09-24 12:54:20.901] max_time_out=0 [2025-09-24 12:54:20.901] No splash screen [2025-09-24 12:54:20.901] stop dss Done [2025-09-24 12:54:20.901] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:54:20.949] /dev/mem opened. [2025-09-24 12:54:20.949] Memory mapped at address 0xffffa926c000. [2025-09-24 12:54:20.975] Read at address 0x00600018 (0xffffa926c018): 0x00000000 [2025-09-24 12:54:20.975] Write at address 0x00600018 (0xffffa926c018): 0x00400040, readback 0x00400040 [2025-09-24 12:54:20.975] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:54:20.997] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:54:21.077] Loaded PowerVR consumer services. [2025-09-24 12:54:21.221] Waiting data available... [2025-09-24 12:54:21.221] 512+0 records in [2025-09-24 12:54:21.221] 512+0 records out [2025-09-24 12:54:21.269] Starting syslogd/klogd: done [2025-09-24 12:54:21.285] DML Start [2025-09-24 12:54:21.461] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:54:21.701] DML res1: 0 [2025-09-24 12:54:22.177] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:54:22.177] Read Success [2025-09-24 12:54:22.177] Verifying certificate... [2025-09-24 12:54:22.465] Verified OK [2025-09-24 12:54:22.481] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:54:24.149] Verified OK [2025-09-24 12:54:24.149] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:54:24.798] Verified OK [2025-09-24 12:54:24.798] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:54:27.452] fs.protected_hardlinks = 1 [2025-09-24 12:54:27.452] fs.protected_symlinks = 1 [2025-09-24 12:54:27.468] kernel.modules_disabled = 1 [2025-09-24 12:54:27.675] [2025-09-24 12:54:27.675] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:54:28.792] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:54:36.467] SBL1:1210.0.1.0 [2025-09-24 12:54:36.515] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:54:38.082] SBL2:1210.0.1.0 [2025-09-24 12:54:38.129] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:54:38.225] j-A [2025-09-24 12:54:45.580] The R5 Autosar Classic is running [2025-09-24 12:54:45.580] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:54:45.601] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:54:46.209] INIT: version 2.96 booting [2025-09-24 12:54:46.320] INIT: Entering runlevel: 5 [2025-09-24 12:54:46.481] mtd24 attached [2025-09-24 12:54:46.481] mtd28 attached [2025-09-24 12:54:46.497] mtd32 attached [2025-09-24 12:54:46.545] RTNETLINK answers: File exists [2025-09-24 12:54:46.612] ubi0:textures is mounted. [2025-09-24 12:54:46.612] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:54:46.612] ubi1:animations is mounted. [2025-09-24 12:54:46.612] ubi2:dml_code is mounted. [2025-09-24 12:54:46.612] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:54:46.612] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:54:46.612] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:54:46.612] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:54:46.612] data.LB_FadeInType0=100 [2025-09-24 12:54:46.612] data.CHLH_FadeInType0=0 [2025-09-24 12:54:46.612] data.WU_FadeInDelay=0 [2025-09-24 12:54:46.612] max_time_out=0 [2025-09-24 12:54:46.612] No splash screen [2025-09-24 12:54:46.612] stop dss Done [2025-09-24 12:54:46.628] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:54:46.644] /dev/mem opened. [2025-09-24 12:54:46.644] Memory mapped at address 0xffffb7a62000. [2025-09-24 12:54:46.676] Read at address 0x00600018 (0xffffb7a62018): 0x00000000 [2025-09-24 12:54:46.676] Write at address 0x00600018 (0xffffb7a62018): 0x00400040, readback 0x00400040 [2025-09-24 12:54:46.676] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:54:46.819] Loaded PowerVR consumer services. [2025-09-24 12:54:46.947] Waiting data available... [2025-09-24 12:54:46.963] 512+0 records in [2025-09-24 12:54:46.963] 512+0 records out [2025-09-24 12:54:47.012] Starting syslogd/klogd: done [2025-09-24 12:54:47.028] DML Start [2025-09-24 12:54:47.187] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:54:47.443] DML res1: 0 [2025-09-24 12:54:47.853] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:54:47.853] Read Success [2025-09-24 12:54:47.853] Verifying certificate... [2025-09-24 12:54:48.141] Verified OK [2025-09-24 12:54:48.157] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:54:49.836] Verified OK [2025-09-24 12:54:49.836] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:54:50.464] Verified OK [2025-09-24 12:54:50.464] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:54:52.958] fs.protected_hardlinks = 1 [2025-09-24 12:54:52.974] fs.protected_symlinks = 1 [2025-09-24 12:54:52.974] kernel.modules_disabled = 1 [2025-09-24 12:54:53.166] [2025-09-24 12:54:53.166] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:54:54.508] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:55:02.183] SBL1:1210.0.1.0 [2025-09-24 12:55:02.231] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:55:03.798] SBL2:1210.0.1.0 [2025-09-24 12:55:03.846] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:55:03.942] j-A [2025-09-24 12:55:11.296] The R5 Autosar Classic is running [2025-09-24 12:55:11.321] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:55:11.321] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:55:11.929] INIT: version 2.96 booting [2025-09-24 12:55:12.041] INIT: Entering runlevel: 5 [2025-09-24 12:55:12.185] mtd24 attached [2025-09-24 12:55:12.201] mtd32 attached [2025-09-24 12:55:12.217] mtd28 attached [2025-09-24 12:55:12.265] ubi0:textures is mounted. [2025-09-24 12:55:12.265] RTNETLINK answers: File exists [2025-09-24 12:55:12.317] ubi2:animations is mounted. [2025-09-24 12:55:12.317] ubi1:dml_code is mounted. [2025-09-24 12:55:12.317] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:55:12.317] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:55:12.317] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:55:12.317] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:55:12.317] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:55:12.317] data.LB_FadeInType0=100 [2025-09-24 12:55:12.317] data.CHLH_FadeInType0=0 [2025-09-24 12:55:12.317] data.WU_FadeInDelay=0 [2025-09-24 12:55:12.317] max_time_out=0 [2025-09-24 12:55:12.317] No splash screen [2025-09-24 12:55:12.317] stop dss Done [2025-09-24 12:55:12.349] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:55:12.365] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:55:12.381] /dev/mem opened. [2025-09-24 12:55:12.381] Memory mapped at address 0xffff82b0f000. [2025-09-24 12:55:12.407] Read at address 0x00600018 (0xffff82b0f018): 0x00000000 [2025-09-24 12:55:12.407] Write at address 0x00600018 (0xffff82b0f018): 0x00400040, readback 0x00400040 [2025-09-24 12:55:12.487] Loaded PowerVR consumer services. [2025-09-24 12:55:12.653] Waiting data available... [2025-09-24 12:55:12.653] 512+0 records in [2025-09-24 12:55:12.653] 512+0 records out [2025-09-24 12:55:12.669] Starting syslogd/klogd: done [2025-09-24 12:55:12.685] DML Start [2025-09-24 12:55:12.845] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:55:13.116] DML res1: 0 [2025-09-24 12:55:13.585] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:55:13.585] Read Success [2025-09-24 12:55:13.585] Verifying certificate... [2025-09-24 12:55:13.825] Verified OK [2025-09-24 12:55:13.841] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:55:15.564] Verified OK [2025-09-24 12:55:15.564] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:55:16.133] Verified OK [2025-09-24 12:55:16.133] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:55:18.835] fs.protected_hardlinks = 1 [2025-09-24 12:55:18.851] fs.protected_symlinks = 1 [2025-09-24 12:55:18.851] kernel.modules_disabled = 1 [2025-09-24 12:55:19.043] [2025-09-24 12:55:19.043] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:55:20.205] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:55:27.904] SBL1:1210.0.1.0 [2025-09-24 12:55:27.952] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:55:29.519] SBL2:1210.0.1.0 [2025-09-24 12:55:29.567] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:55:29.663] j-A [2025-09-24 12:55:37.018] The R5 Autosar Classic is running [2025-09-24 12:55:37.041] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:55:37.041] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:55:37.649] INIT: version 2.96 booting [2025-09-24 12:55:37.761] INIT: Entering runlevel: 5 [2025-09-24 12:55:37.920] mtd28 attached [2025-09-24 12:55:37.920] mtd24 attached [2025-09-24 12:55:37.936] mtd32 attached [2025-09-24 12:55:37.968] ubi0:animations is mounted. [2025-09-24 12:55:37.984] RTNETLINK answers: File exists [2025-09-24 12:55:38.044] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:55:38.044] ubi1:textures is mounted. [2025-09-24 12:55:38.044] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:55:38.044] ubi2:dml_code is mounted. [2025-09-24 12:55:38.044] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:55:38.044] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:55:38.044] data.LB_FadeInType0=100 [2025-09-24 12:55:38.044] data.CHLH_FadeInType0=0 [2025-09-24 12:55:38.044] data.WU_FadeInDelay=0 [2025-09-24 12:55:38.044] max_time_out=0 [2025-09-24 12:55:38.044] No splash screen [2025-09-24 12:55:38.044] stop dss Done [2025-09-24 12:55:38.044] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:55:38.117] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:55:38.117] /dev/mem opened. [2025-09-24 12:55:38.117] Memory mapped at address 0xffffac4aa000. [2025-09-24 12:55:38.117] Read at address 0x00600018 (0xffffac4aa018): 0x00000000 [2025-09-24 12:55:38.117] Write at address 0x00600018 (0xffffac4aa018): 0x00400040, readback 0x00400040 [2025-09-24 12:55:38.117] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:55:38.276] Loaded PowerVR consumer services. [2025-09-24 12:55:38.389] Waiting data available... [2025-09-24 12:55:38.405] 512+0 records in [2025-09-24 12:55:38.405] 512+0 records out [2025-09-24 12:55:38.468] Starting syslogd/klogd: done [2025-09-24 12:55:38.484] DML Start [2025-09-24 12:55:38.660] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:55:38.868] DML res1: 0 [2025-09-24 12:55:39.283] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:55:39.299] Read Success [2025-09-24 12:55:39.299] Verifying certificate... [2025-09-24 12:55:39.571] Verified OK [2025-09-24 12:55:39.588] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:55:41.322] Verified OK [2025-09-24 12:55:41.322] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:55:41.907] Verified OK [2025-09-24 12:55:41.907] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:55:44.418] fs.protected_hardlinks = 1 [2025-09-24 12:55:44.418] fs.protected_symlinks = 1 [2025-09-24 12:55:44.433] kernel.modules_disabled = 1 [2025-09-24 12:55:44.609] [2025-09-24 12:55:44.609] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:55:45.904] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:55:53.612] SBL1:1210.0.1.0 [2025-09-24 12:55:53.660] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:55:55.227] SBL2:1210.0.1.0 [2025-09-24 12:55:55.276] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:55:55.387] j-A [2025-09-24 12:56:02.726] The R5 Autosar Classic is running [2025-09-24 12:56:02.751] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:56:02.751] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:56:03.358] INIT: version 2.96 booting [2025-09-24 12:56:03.471] INIT: Entering runlevel: 5 [2025-09-24 12:56:03.630] mtd32 attached [2025-09-24 12:56:03.630] mtd24 attached [2025-09-24 12:56:03.646] mtd28 attached [2025-09-24 12:56:03.695] ubi0:dml_code is mounted. [2025-09-24 12:56:03.695] RTNETLINK answers: File exists [2025-09-24 12:56:03.753] ubi1:textures is mounted. [2025-09-24 12:56:03.753] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:56:03.753] ubi2:animations is mounted. [2025-09-24 12:56:03.753] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:56:03.753] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:56:03.753] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:56:03.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:56:03.753] data.LB_FadeInType0=100 [2025-09-24 12:56:03.753] data.CHLH_FadeInType0=0 [2025-09-24 12:56:03.753] data.WU_FadeInDelay=0 [2025-09-24 12:56:03.753] max_time_out=0 [2025-09-24 12:56:03.753] No splash screen [2025-09-24 12:56:03.753] stop dss Done [2025-09-24 12:56:03.799] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:56:03.799] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:56:03.832] /dev/mem opened. [2025-09-24 12:56:03.832] Memory mapped at address 0xffffaba12000. [2025-09-24 12:56:03.832] Read at address 0x00600018 (0xffffaba12018): 0x00000000 [2025-09-24 12:56:03.832] Write at address 0x00600018 (0xffffaba12018): 0x00400040, readback 0x00400040 [2025-09-24 12:56:03.912] Loaded PowerVR consumer services. [2025-09-24 12:56:04.072] 512+0 records in [2025-09-24 12:56:04.072] 512+0 records out [2025-09-24 12:56:04.072] Waiting data available... [2025-09-24 12:56:04.120] Starting syslogd/klogd: done [2025-09-24 12:56:04.152] DML Start [2025-09-24 12:56:04.344] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:56:04.584] DML res1: 0 [2025-09-24 12:56:04.965] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:56:04.965] Read Success [2025-09-24 12:56:04.965] Verifying certificate... [2025-09-24 12:56:05.221] Verified OK [2025-09-24 12:56:05.237] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:56:06.900] Verified OK [2025-09-24 12:56:06.916] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:56:07.497] Verified OK [2025-09-24 12:56:07.497] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:56:10.232] fs.protected_hardlinks = 1 [2025-09-24 12:56:10.248] fs.protected_symlinks = 1 [2025-09-24 12:56:10.248] kernel.modules_disabled = 1 [2025-09-24 12:56:10.456] [2025-09-24 12:56:10.456] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:56:11.633] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:56:19.352] SBL1:1210.0.1.0 [2025-09-24 12:56:19.399] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:56:20.967] SBL2:1210.0.1.0 [2025-09-24 12:56:21.014] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:56:21.126] j-A [2025-09-24 12:56:28.464] The R5 Autosar Classic is running [2025-09-24 12:56:28.489] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:56:28.489] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:56:29.097] INIT: version 2.96 booting [2025-09-24 12:56:29.208] INIT: Entering runlevel: 5 [2025-09-24 12:56:29.353] mtd24 attached [2025-09-24 12:56:29.368] mtd32 attached [2025-09-24 12:56:29.384] mtd28 attached [2025-09-24 12:56:29.400] ubi0:textures is mounted. [2025-09-24 12:56:29.432] RTNETLINK answers: File exists [2025-09-24 12:56:29.488] ubi2:animations is mounted. [2025-09-24 12:56:29.488] ubi1:dml_code is mounted. [2025-09-24 12:56:29.488] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:56:29.488] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:56:29.488] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:56:29.488] data.LB_FadeInType0=100 [2025-09-24 12:56:29.488] data.CHLH_FadeInType0=0 [2025-09-24 12:56:29.488] data.WU_FadeInDelay=0 [2025-09-24 12:56:29.488] max_time_out=0 [2025-09-24 12:56:29.488] No splash screen [2025-09-24 12:56:29.488] stop dss Done [2025-09-24 12:56:29.488] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:56:29.488] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:56:29.536] /dev/mem opened. [2025-09-24 12:56:29.536] Memory mapped at address 0xffff8bcb4000. [2025-09-24 12:56:29.562] Read at address 0x00600018 (0xffff8bcb4018): 0x00000000 [2025-09-24 12:56:29.562] Write at address 0x00600018 (0xffff8bcb4018): 0x00400040, readback 0x00400040 [2025-09-24 12:56:29.578] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:56:29.595] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:56:29.770] Loaded PowerVR consumer services. [2025-09-24 12:56:29.834] Waiting data available... [2025-09-24 12:56:29.850] 512+0 records in [2025-09-24 12:56:29.850] 512+0 records out [2025-09-24 12:56:29.866] Starting syslogd/klogd: done [2025-09-24 12:56:29.898] DML Start [2025-09-24 12:56:30.090] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:56:30.281] DML res1: 0 [2025-09-24 12:56:30.751] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:56:30.751] Read Success [2025-09-24 12:56:30.751] Verifying certificate... [2025-09-24 12:56:30.992] Verified OK [2025-09-24 12:56:31.007] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:56:32.843] Verified OK [2025-09-24 12:56:32.843] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:56:33.397] Verified OK [2025-09-24 12:56:33.397] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:56:35.748] fs.protected_hardlinks = 1 [2025-09-24 12:56:35.776] fs.protected_symlinks = 1 [2025-09-24 12:56:35.776] kernel.modules_disabled = 1 [2025-09-24 12:56:35.985] [2025-09-24 12:56:35.985] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:56:37.387] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:56:45.071] SBL1:1210.0.1.0 [2025-09-24 12:56:45.103] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:56:46.686] SBL2:1210.0.1.0 [2025-09-24 12:56:46.718] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:56:46.830] j-A [2025-09-24 12:56:54.202] The R5 Autosar Classic is running [2025-09-24 12:56:54.202] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:56:54.202] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:56:54.809] INIT: version 2.96 booting [2025-09-24 12:56:54.922] INIT: Entering runlevel: 5 [2025-09-24 12:56:55.066] mtd32 attached [2025-09-24 12:56:55.082] mtd28 attached [2025-09-24 12:56:55.098] mtd24 attached [2025-09-24 12:56:55.129] ubi0:dml_code is mounted. [2025-09-24 12:56:55.185] RTNETLINK answers: File exists [2025-09-24 12:56:55.185] ubi1:animations is mounted. [2025-09-24 12:56:55.185] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:56:55.185] ubi2:textures is mounted. [2025-09-24 12:56:55.185] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:56:55.185] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:56:55.185] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:56:55.185] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:56:55.206] data.LB_FadeInType0=100 [2025-09-24 12:56:55.206] data.CHLH_FadeInType0=0 [2025-09-24 12:56:55.206] data.WU_FadeInDelay=0 [2025-09-24 12:56:55.206] max_time_out=0 [2025-09-24 12:56:55.206] No splash screen [2025-09-24 12:56:55.206] stop dss Done [2025-09-24 12:56:55.270] /dev/mem opened. [2025-09-24 12:56:55.270] Memory mapped at address 0xffffa232d000. [2025-09-24 12:56:55.302] Read at address 0x00600018 (0xffffa232d018): 0x00000000 [2025-09-24 12:56:55.302] Write at address 0x00600018 (0xffffa232d018): 0x00400040, readback 0x00400040 [2025-09-24 12:56:55.302] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:56:55.302] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:56:55.398] Loaded PowerVR consumer services. [2025-09-24 12:56:55.538] 512+0 records in [2025-09-24 12:56:55.538] 512+0 records out [2025-09-24 12:56:55.538] Waiting data available... [2025-09-24 12:56:55.569] Starting syslogd/klogd: done [2025-09-24 12:56:55.586] DML Start [2025-09-24 12:56:55.762] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:56:55.970] DML res1: 0 [2025-09-24 12:56:56.473] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:56:56.473] Read Success [2025-09-24 12:56:56.473] Verifying certificate... [2025-09-24 12:56:56.712] Verified OK [2025-09-24 12:56:56.712] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:56:58.414] Verified OK [2025-09-24 12:56:58.414] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:56:59.005] Verified OK [2025-09-24 12:56:59.005] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:57:01.675] fs.protected_hardlinks = 1 [2025-09-24 12:57:01.703] fs.protected_symlinks = 1 [2025-09-24 12:57:01.703] kernel.modules_disabled = 1 [2025-09-24 12:57:01.895] [2025-09-24 12:57:01.895] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:57:03.036] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:57:10.788] SBL1:1210.0.1.0 [2025-09-24 12:57:10.836] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:57:12.403] SBL2:1210.0.1.0 [2025-09-24 12:57:12.435] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:57:12.547] j-A [2025-09-24 12:57:19.918] The R5 Autosar Classic is running [2025-09-24 12:57:19.918] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:57:19.918] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:57:20.526] INIT: version 2.96 booting [2025-09-24 12:57:20.637] INIT: Entering runlevel: 5 [2025-09-24 12:57:20.782] mtd24 attached [2025-09-24 12:57:20.798] mtd28 attached [2025-09-24 12:57:20.830] mtd32 attached [2025-09-24 12:57:20.830] ubi0:textures is mounted. [2025-09-24 12:57:20.862] ubi1:animations is mounted. [2025-09-24 12:57:20.862] RTNETLINK answers: File exists [2025-09-24 12:57:20.924] ubi2:dml_code is mounted. [2025-09-24 12:57:20.924] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:57:20.924] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:57:20.924] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:57:20.924] data.LB_FadeInType0=100 [2025-09-24 12:57:20.924] data.CHLH_FadeInType0=0 [2025-09-24 12:57:20.924] data.WU_FadeInDelay=0 [2025-09-24 12:57:20.924] max_time_out=0 [2025-09-24 12:57:20.924] No splash screen [2025-09-24 12:57:20.924] stop dss Done [2025-09-24 12:57:20.924] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:57:20.924] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:57:20.956] /dev/mem opened. [2025-09-24 12:57:20.956] Memory mapped at address 0xffffb65f7000. [2025-09-24 12:57:20.981] Read at address 0x00600018 (0xffffb65f7018): 0x00000000 [2025-09-24 12:57:20.981] Write at address 0x00600018 (0xffffb65f7018): 0x00400040, readback 0x00400040 [2025-09-24 12:57:21.013] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:57:21.029] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:57:21.125] Loaded PowerVR consumer services. [2025-09-24 12:57:21.253] Waiting data available... [2025-09-24 12:57:21.253] 512+0 records in [2025-09-24 12:57:21.253] 512+0 records out [2025-09-24 12:57:21.285] Starting syslogd/klogd: done [2025-09-24 12:57:21.301] DML Start [2025-09-24 12:57:21.476] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:57:21.685] DML res1: 0 [2025-09-24 12:57:22.114] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:57:22.114] Read Success [2025-09-24 12:57:22.114] Verifying certificate... [2025-09-24 12:57:22.322] Verified OK [2025-09-24 12:57:22.338] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:57:24.021] Verified OK [2025-09-24 12:57:24.021] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:57:24.645] Verified OK [2025-09-24 12:57:24.661] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:57:27.204] fs.protected_hardlinks = 1 [2025-09-24 12:57:27.204] fs.protected_symlinks = 1 [2025-09-24 12:57:27.219] kernel.modules_disabled = 1 [2025-09-24 12:57:27.411] [2025-09-24 12:57:27.411] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:57:28.802] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:57:36.507] SBL1:1210.0.1.0 [2025-09-24 12:57:36.555] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:57:38.121] SBL2:1210.0.1.0 [2025-09-24 12:57:38.169] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:57:38.266] j-A [2025-09-24 12:57:45.619] The R5 Autosar Classic is running [2025-09-24 12:57:45.643] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:57:45.643] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:57:46.251] INIT: version 2.96 booting [2025-09-24 12:57:46.363] INIT: Entering runlevel: 5 [2025-09-24 12:57:46.507] mtd24 attached [2025-09-24 12:57:46.523] mtd32 attached [2025-09-24 12:57:46.539] mtd28 attached [2025-09-24 12:57:46.555] ubi0:textures is mounted. [2025-09-24 12:57:46.587] RTNETLINK answers: File exists [2025-09-24 12:57:46.587] ubi1:dml_code is mounted. [2025-09-24 12:57:46.612] ubi2:animations is mounted. [2025-09-24 12:57:46.612] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:57:46.613] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:57:46.644] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:57:46.644] data.LB_FadeInType0=100 [2025-09-24 12:57:46.644] data.CHLH_FadeInType0=0 [2025-09-24 12:57:46.644] data.WU_FadeInDelay=0 [2025-09-24 12:57:46.644] max_time_out=0 [2025-09-24 12:57:46.644] No splash screen [2025-09-24 12:57:46.644] stop dss Done [2025-09-24 12:57:46.644] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:57:46.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:57:46.716] /dev/mem opened. [2025-09-24 12:57:46.716] Memory mapped at address 0xffff97f70000. [2025-09-24 12:57:46.716] Read at address 0x00600018 (0xffff97f70018): 0x00000000 [2025-09-24 12:57:46.716] Write at address 0x00600018 (0xffff97f70018): 0x00400040, readback 0x00400040 [2025-09-24 12:57:46.762] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:57:46.762] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:57:46.826] Loaded PowerVR consumer services. [2025-09-24 12:57:46.969] Waiting data available... [2025-09-24 12:57:46.969] 512+0 records in [2025-09-24 12:57:46.969] 512+0 records out [2025-09-24 12:57:47.018] Starting syslogd/klogd: done [2025-09-24 12:57:47.034] DML Start [2025-09-24 12:57:47.193] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:57:47.433] DML res1: 0 [2025-09-24 12:57:47.888] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:57:47.888] Read Success [2025-09-24 12:57:47.888] Verifying certificate... [2025-09-24 12:57:48.144] Verified OK [2025-09-24 12:57:48.160] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:57:49.708] Verified OK [2025-09-24 12:57:49.708] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:57:50.314] Verified OK [2025-09-24 12:57:50.314] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:57:53.000] fs.protected_hardlinks = 1 [2025-09-24 12:57:53.000] fs.protected_symlinks = 1 [2025-09-24 12:57:53.015] kernel.modules_disabled = 1 [2025-09-24 12:57:53.192] [2025-09-24 12:57:53.192] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:57:54.471] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:58:02.204] SBL1:1210.0.1.0 [2025-09-24 12:58:02.252] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:58:03.819] SBL2:1210.0.1.0 [2025-09-24 12:58:03.867] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:58:03.963] j-A [2025-09-24 12:58:11.317] The R5 Autosar Classic is running [2025-09-24 12:58:11.338] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:58:11.338] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:58:11.962] INIT: version 2.96 booting [2025-09-24 12:58:12.058] INIT: Entering runlevel: 5 [2025-09-24 12:58:12.218] mtd24 attached [2025-09-24 12:58:12.234] mtd28 attached [2025-09-24 12:58:12.250] mtd32 attached [2025-09-24 12:58:12.282] ubi0:textures is mounted. [2025-09-24 12:58:12.347] RTNETLINK answers: File exists [2025-09-24 12:58:12.347] ubi1:animations is mounted. [2025-09-24 12:58:12.347] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:58:12.347] ubi2:dml_code is mounted. [2025-09-24 12:58:12.347] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:58:12.347] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:58:12.347] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:58:12.347] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:58:12.347] data.LB_FadeInType0=100 [2025-09-24 12:58:12.347] data.CHLH_FadeInType0=0 [2025-09-24 12:58:12.347] data.WU_FadeInDelay=0 [2025-09-24 12:58:12.347] max_time_out=0 [2025-09-24 12:58:12.347] No splash screen [2025-09-24 12:58:12.347] stop dss Done [2025-09-24 12:58:12.379] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:58:12.426] /dev/mem opened. [2025-09-24 12:58:12.426] Memory mapped at address 0xffffa2d2e000. [2025-09-24 12:58:12.426] Read at address 0x00600018 (0xffffa2d2e018): 0x00000000 [2025-09-24 12:58:12.426] Write at address 0x00600018 (0xffffa2d2e018): 0x00400040, readback 0x00400040 [2025-09-24 12:58:12.426] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:58:12.570] Loaded PowerVR consumer services. [2025-09-24 12:58:12.682] Waiting data available... [2025-09-24 12:58:12.698] 512+0 records in [2025-09-24 12:58:12.698] 512+0 records out [2025-09-24 12:58:12.729] Starting syslogd/klogd: done [2025-09-24 12:58:12.745] DML Start [2025-09-24 12:58:12.922] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:58:13.114] DML res1: 0 [2025-09-24 12:58:13.625] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:58:13.646] Read Success [2025-09-24 12:58:13.646] Verifying certificate... [2025-09-24 12:58:13.886] Verified OK [2025-09-24 12:58:13.902] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:58:15.482] Verified OK [2025-09-24 12:58:15.482] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:58:16.088] Verified OK [2025-09-24 12:58:16.088] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:58:18.742] fs.protected_hardlinks = 1 [2025-09-24 12:58:18.742] fs.protected_symlinks = 1 [2025-09-24 12:58:18.758] kernel.modules_disabled = 1 [2025-09-24 12:58:18.966] [2025-09-24 12:58:18.966] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:58:20.229] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:58:27.909] SBL1:1210.0.1.0 [2025-09-24 12:58:27.957] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:58:29.523] SBL2:1210.0.1.0 [2025-09-24 12:58:29.571] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:58:29.667] j-A [2025-09-24 12:58:37.022] The R5 Autosar Classic is running [2025-09-24 12:58:37.022] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:58:37.043] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:58:37.650] INIT: version 2.96 booting [2025-09-24 12:58:37.762] INIT: Entering runlevel: 5 [2025-09-24 12:58:37.906] mtd28 attached [2025-09-24 12:58:37.922] mtd24 attached [2025-09-24 12:58:37.938] mtd32 attached [2025-09-24 12:58:38.042] RTNETLINK answers: File exists [2025-09-24 12:58:38.042] ubi0:animations is mounted. [2025-09-24 12:58:38.042] ubi1:textures is mounted. [2025-09-24 12:58:38.042] ubi2:dml_code is mounted. [2025-09-24 12:58:38.042] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:58:38.042] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:58:38.042] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:58:38.042] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:58:38.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:58:38.042] data.LB_FadeInType0=100 [2025-09-24 12:58:38.042] data.CHLH_FadeInType0=0 [2025-09-24 12:58:38.042] data.WU_FadeInDelay=0 [2025-09-24 12:58:38.042] max_time_out=0 [2025-09-24 12:58:38.042] No splash screen [2025-09-24 12:58:38.042] stop dss Done [2025-09-24 12:58:38.074] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:58:38.112] /dev/mem opened. [2025-09-24 12:58:38.112] Memory mapped at address 0xffffa171a000. [2025-09-24 12:58:38.112] Read at address 0x00600018 (0xffffa171a018): 0x00000000 [2025-09-24 12:58:38.112] Write at address 0x00600018 (0xffffa171a018): 0x00400040, readback 0x00400040 [2025-09-24 12:58:38.112] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:58:38.287] Loaded PowerVR consumer services. [2025-09-24 12:58:38.383] Waiting data available... [2025-09-24 12:58:38.415] 512+0 records in [2025-09-24 12:58:38.415] 512+0 records out [2025-09-24 12:58:38.464] Starting syslogd/klogd: done [2025-09-24 12:58:38.480] DML Start [2025-09-24 12:58:38.655] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:58:38.895] DML res1: 0 [2025-09-24 12:58:39.279] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:58:39.300] Read Success [2025-09-24 12:58:39.300] Verifying certificate... [2025-09-24 12:58:39.524] Verified OK [2025-09-24 12:58:39.539] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:58:41.283] Verified OK [2025-09-24 12:58:41.283] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:58:41.837] Verified OK [2025-09-24 12:58:41.837] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:58:44.331] fs.protected_hardlinks = 1 [2025-09-24 12:58:44.331] fs.protected_symlinks = 1 [2025-09-24 12:58:44.348] kernel.modules_disabled = 1 [2025-09-24 12:58:44.539] [2025-09-24 12:58:44.539] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:58:45.962] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:58:53.644] SBL1:1210.0.1.0 [2025-09-24 12:58:53.692] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:58:55.258] SBL2:1210.0.1.0 [2025-09-24 12:58:55.290] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:58:55.402] j-A [2025-09-24 12:59:02.757] The R5 Autosar Classic is running [2025-09-24 12:59:02.757] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:59:02.778] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:59:03.386] INIT: version 2.96 booting [2025-09-24 12:59:03.498] INIT: Entering runlevel: 5 [2025-09-24 12:59:03.641] mtd28 attached [2025-09-24 12:59:03.657] mtd32 attached [2025-09-24 12:59:03.673] mtd24 attached [2025-09-24 12:59:03.757] RTNETLINK answers: File exists [2025-09-24 12:59:03.757] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:59:03.757] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:59:03.757] ubi1:dml_code is mounted. [2025-09-24 12:59:03.757] ubi2:textures is mounted. [2025-09-24 12:59:03.757] ubi0:animations is mounted. [2025-09-24 12:59:03.757] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:59:03.757] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:59:03.757] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:59:03.777] data.LB_FadeInType0=100 [2025-09-24 12:59:03.777] data.CHLH_FadeInType0=0 [2025-09-24 12:59:03.777] data.WU_FadeInDelay=0 [2025-09-24 12:59:03.777] max_time_out=0 [2025-09-24 12:59:03.777] No splash screen [2025-09-24 12:59:03.777] stop dss Done [2025-09-24 12:59:03.825] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:59:03.863] /dev/mem opened. [2025-09-24 12:59:03.863] Memory mapped at address 0xffffbc107000. [2025-09-24 12:59:03.863] Read at address 0x00600018 (0xffffbc107018): 0x00000000 [2025-09-24 12:59:03.863] Write at address 0x00600018 (0xffffbc107018): 0x00400040, readback 0x00400040 [2025-09-24 12:59:03.863] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:59:04.024] Loaded PowerVR consumer services. [2025-09-24 12:59:04.119] Waiting data available... [2025-09-24 12:59:04.119] 512+0 records in [2025-09-24 12:59:04.119] 512+0 records out [2025-09-24 12:59:04.151] Starting syslogd/klogd: done [2025-09-24 12:59:04.167] DML Start [2025-09-24 12:59:04.310] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:59:04.503] DML res1: 0 [2025-09-24 12:59:05.061] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:59:05.061] Read Success [2025-09-24 12:59:05.061] Verifying certificate... [2025-09-24 12:59:05.332] Verified OK [2025-09-24 12:59:05.347] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:59:06.941] Verified OK [2025-09-24 12:59:06.941] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:59:07.588] Verified OK [2025-09-24 12:59:07.588] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:59:10.193] fs.protected_hardlinks = 1 [2025-09-24 12:59:10.220] fs.protected_symlinks = 1 [2025-09-24 12:59:10.220] kernel.modules_disabled = 1 [2025-09-24 12:59:10.413] [2025-09-24 12:59:10.413] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:59:11.621] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:59:19.365] SBL1:1210.0.1.0 [2025-09-24 12:59:19.396] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:59:20.978] SBL2:1210.0.1.0 [2025-09-24 12:59:21.010] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:59:21.122] j-A [2025-09-24 12:59:28.461] The R5 Autosar Classic is running [2025-09-24 12:59:28.492] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:59:28.492] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:59:29.101] INIT: version 2.96 booting [2025-09-24 12:59:29.213] INIT: Entering runlevel: 5 [2025-09-24 12:59:29.372] mtd28 attached [2025-09-24 12:59:29.372] mtd24 attached [2025-09-24 12:59:29.388] mtd32 attached [2025-09-24 12:59:29.436] ubi0:animations is mounted. [2025-09-24 12:59:29.436] ubi1:textures is mounted. [2025-09-24 12:59:29.436] RTNETLINK answers: File exists [2025-09-24 12:59:29.490] ubi2:dml_code is mounted. [2025-09-24 12:59:29.490] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:59:29.490] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:59:29.490] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:59:29.490] data.LB_FadeInType0=100 [2025-09-24 12:59:29.490] data.CHLH_FadeInType0=0 [2025-09-24 12:59:29.490] data.WU_FadeInDelay=0 [2025-09-24 12:59:29.490] max_time_out=0 [2025-09-24 12:59:29.490] No splash screen [2025-09-24 12:59:29.490] stop dss Done [2025-09-24 12:59:29.490] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:59:29.490] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:59:29.560] /dev/mem opened. [2025-09-24 12:59:29.560] Memory mapped at address 0xffff8988b000. [2025-09-24 12:59:29.560] Read at address 0x00600018 (0xffff8988b018): 0x00000000 [2025-09-24 12:59:29.560] Write at address 0x00600018 (0xffff8988b018): 0x00400040, readback 0x00400040 [2025-09-24 12:59:29.560] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:59:29.575] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:59:29.703] Loaded PowerVR consumer services. [2025-09-24 12:59:29.846] Waiting data available... [2025-09-24 12:59:29.846] 512+0 records in [2025-09-24 12:59:29.846] 512+0 records out [2025-09-24 12:59:29.894] Starting syslogd/klogd: done [2025-09-24 12:59:29.910] DML Start [2025-09-24 12:59:30.102] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:59:30.310] DML res1: 0 [2025-09-24 12:59:30.815] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:59:30.815] Read Success [2025-09-24 12:59:30.815] Verifying certificate... [2025-09-24 12:59:31.039] Verified OK [2025-09-24 12:59:31.055] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:59:32.627] Verified OK [2025-09-24 12:59:32.627] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:59:33.250] Verified OK [2025-09-24 12:59:33.250] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 12:59:35.968] fs.protected_hardlinks = 1 [2025-09-24 12:59:35.968] fs.protected_symlinks = 1 [2025-09-24 12:59:35.984] kernel.modules_disabled = 1 [2025-09-24 12:59:36.191] [2025-09-24 12:59:36.191] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 12:59:37.396] RTNETLINK answers: Cannot assign requested address [2025-09-24 12:59:45.069] SBL1:1210.0.1.0 [2025-09-24 12:59:45.101] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:59:46.682] SBL2:1210.0.1.0 [2025-09-24 12:59:46.714] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 12:59:46.827] j-A [2025-09-24 12:59:54.199] The R5 Autosar Classic is running [2025-09-24 12:59:54.199] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 12:59:54.199] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 12:59:54.807] INIT: version 2.96 booting [2025-09-24 12:59:54.918] INIT: Entering runlevel: 5 [2025-09-24 12:59:55.079] mtd32 attached [2025-09-24 12:59:55.079] mtd28 attached [2025-09-24 12:59:55.095] mtd24 attached [2025-09-24 12:59:55.127] ubi0:dml_code is mounted. [2025-09-24 12:59:55.143] ubi1:animations is mounted. [2025-09-24 12:59:55.143] RTNETLINK answers: File exists [2025-09-24 12:59:55.201] ubi2:textures is mounted. [2025-09-24 12:59:55.201] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 12:59:55.201] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 12:59:55.201] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 12:59:55.201] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 12:59:55.201] data.LB_FadeInType0=100 [2025-09-24 12:59:55.201] data.CHLH_FadeInType0=0 [2025-09-24 12:59:55.201] data.WU_FadeInDelay=0 [2025-09-24 12:59:55.201] max_time_out=0 [2025-09-24 12:59:55.201] No splash screen [2025-09-24 12:59:55.201] stop dss Done [2025-09-24 12:59:55.201] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 12:59:55.232] /dev/mem opened. [2025-09-24 12:59:55.264] Memory mapped at address 0xffffb0315000. [2025-09-24 12:59:55.264] Read at address 0x00600018 (0xffffb0315018): 0x00000000 [2025-09-24 12:59:55.264] Write at address 0x00600018 (0xffffb0315018): 0x00400040, readback 0x00400040 [2025-09-24 12:59:55.296] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 12:59:55.312] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 12:59:55.408] Loaded PowerVR consumer services. [2025-09-24 12:59:55.536] Waiting data available... [2025-09-24 12:59:55.552] 512+0 records in [2025-09-24 12:59:55.552] 512+0 records out [2025-09-24 12:59:55.600] Starting syslogd/klogd: done [2025-09-24 12:59:55.616] DML Start [2025-09-24 12:59:55.792] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 12:59:56.032] DML res1: 0 [2025-09-24 12:59:56.447] Read DML Algo certificate (mtd31) and save to file [2025-09-24 12:59:56.468] Read Success [2025-09-24 12:59:56.468] Verifying certificate... [2025-09-24 12:59:56.692] Verified OK [2025-09-24 12:59:56.708] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 12:59:58.355] Verified OK [2025-09-24 12:59:58.355] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 12:59:59.024] Verified OK [2025-09-24 12:59:59.024] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:00:01.693] fs.protected_hardlinks = 1 [2025-09-24 13:00:01.710] fs.protected_symlinks = 1 [2025-09-24 13:00:01.710] kernel.modules_disabled = 1 [2025-09-24 13:00:01.901] [2025-09-24 13:00:01.901] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:00:03.099] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:00:10.754] SBL1:1210.0.1.0 [2025-09-24 13:00:10.802] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:00:12.368] SBL2:1210.0.1.0 [2025-09-24 13:00:12.416] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:00:12.513] j-A [2025-09-24 13:00:19.868] The R5 Autosar Classic is running [2025-09-24 13:00:19.889] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:00:19.889] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:00:20.496] INIT: version 2.96 booting [2025-09-24 13:00:20.608] INIT: Entering runlevel: 5 [2025-09-24 13:00:20.768] mtd24 attached [2025-09-24 13:00:20.768] mtd32 attached [2025-09-24 13:00:20.784] mtd28 attached [2025-09-24 13:00:20.832] ubi0:textures is mounted. [2025-09-24 13:00:20.832] RTNETLINK answers: File exists [2025-09-24 13:00:20.898] ubi2:animations is mounted. [2025-09-24 13:00:20.898] ubi1:dml_code is mounted. [2025-09-24 13:00:20.898] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:00:20.898] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:00:20.898] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:00:20.898] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:00:20.898] data.LB_FadeInType0=100 [2025-09-24 13:00:20.898] data.CHLH_FadeInType0=0 [2025-09-24 13:00:20.898] data.WU_FadeInDelay=0 [2025-09-24 13:00:20.898] max_time_out=0 [2025-09-24 13:00:20.898] No splash screen [2025-09-24 13:00:20.898] stop dss Done [2025-09-24 13:00:20.898] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:00:20.963] /dev/mem opened. [2025-09-24 13:00:20.963] Memory mapped at address 0xffff9872a000. [2025-09-24 13:00:20.963] Read at address 0x00600018 (0xffff9872a018): 0x00000000 [2025-09-24 13:00:20.963] Write at address 0x00600018 (0xffff9872a018): 0x00400040, readback 0x00400040 [2025-09-24 13:00:20.963] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:00:20.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:00:21.059] Loaded PowerVR consumer services. [2025-09-24 13:00:21.243] Waiting data available... [2025-09-24 13:00:21.243] 512+0 records in [2025-09-24 13:00:21.243] 512+0 records out [2025-09-24 13:00:21.259] Starting syslogd/klogd: done [2025-09-24 13:00:21.275] DML Start [2025-09-24 13:00:21.451] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:00:21.676] DML res1: 0 [2025-09-24 13:00:22.145] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:00:22.145] Read Success [2025-09-24 13:00:22.145] Verifying certificate... [2025-09-24 13:00:22.385] Verified OK [2025-09-24 13:00:22.401] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:00:24.182] Verified OK [2025-09-24 13:00:24.182] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:00:24.693] Verified OK [2025-09-24 13:00:24.714] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:00:27.208] fs.protected_hardlinks = 1 [2025-09-24 13:00:27.236] fs.protected_symlinks = 1 [2025-09-24 13:00:27.236] kernel.modules_disabled = 1 [2025-09-24 13:00:27.413] [2025-09-24 13:00:27.413] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:00:28.767] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:00:36.469] SBL1:1210.0.1.0 [2025-09-24 13:00:36.517] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:00:38.083] SBL2:1210.0.1.0 [2025-09-24 13:00:38.132] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:00:38.227] j-A [2025-09-24 13:00:45.582] The R5 Autosar Classic is running [2025-09-24 13:00:45.606] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:00:45.606] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:00:46.214] INIT: version 2.96 booting [2025-09-24 13:00:46.326] INIT: Entering runlevel: 5 [2025-09-24 13:00:46.485] mtd24 attached [2025-09-24 13:00:46.485] mtd28 attached [2025-09-24 13:00:46.501] mtd32 attached [2025-09-24 13:00:46.617] RTNETLINK answers: File exists [2025-09-24 13:00:46.617] ubi0:textures is mounted. [2025-09-24 13:00:46.617] ubi1:animations is mounted. [2025-09-24 13:00:46.617] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:00:46.617] ubi2:dml_code is mounted. [2025-09-24 13:00:46.617] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:00:46.617] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:00:46.617] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:00:46.617] data.LB_FadeInType0=100 [2025-09-24 13:00:46.617] data.CHLH_FadeInType0=0 [2025-09-24 13:00:46.617] data.WU_FadeInDelay=0 [2025-09-24 13:00:46.617] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:00:46.617] max_time_out=0 [2025-09-24 13:00:46.617] No splash screen [2025-09-24 13:00:46.617] stop dss Done [2025-09-24 13:00:46.687] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:00:46.687] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:00:46.687] /dev/mem opened. [2025-09-24 13:00:46.687] Memory mapped at address 0xffffafc55000. [2025-09-24 13:00:46.687] Read at address 0x00600018 (0xffffafc55018): 0x00000000 [2025-09-24 13:00:46.687] Write at address 0x00600018 (0xffffafc55018): 0x00400040, readback 0x00400040 [2025-09-24 13:00:46.831] Loaded PowerVR consumer services. [2025-09-24 13:00:46.943] Waiting data available... [2025-09-24 13:00:46.959] 512+0 records in [2025-09-24 13:00:46.959] 512+0 records out [2025-09-24 13:00:47.006] Starting syslogd/klogd: done [2025-09-24 13:00:47.022] DML Start [2025-09-24 13:00:47.215] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:00:47.391] DML res1: 0 [2025-09-24 13:00:47.835] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:00:47.835] Read Success [2025-09-24 13:00:47.835] Verifying certificate... [2025-09-24 13:00:48.075] Verified OK [2025-09-24 13:00:48.091] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:00:49.557] Verified OK [2025-09-24 13:00:49.557] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:00:50.138] Verified OK [2025-09-24 13:00:50.138] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:00:52.936] fs.protected_hardlinks = 1 [2025-09-24 13:00:52.936] fs.protected_symlinks = 1 [2025-09-24 13:00:52.936] kernel.modules_disabled = 1 [2025-09-24 13:00:53.128] [2025-09-24 13:00:53.128] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:00:54.450] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:01:02.193] SBL1:1210.0.1.0 [2025-09-24 13:01:02.241] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:01:03.807] SBL2:1210.0.1.0 [2025-09-24 13:01:03.855] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:01:03.951] j-A [2025-09-24 13:01:11.306] The R5 Autosar Classic is running [2025-09-24 13:01:11.329] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:01:11.329] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:01:11.937] INIT: version 2.96 booting [2025-09-24 13:01:12.048] INIT: Entering runlevel: 5 [2025-09-24 13:01:12.192] mtd28 attached [2025-09-24 13:01:12.208] mtd24 attached [2025-09-24 13:01:12.224] mtd32 attached [2025-09-24 13:01:12.272] ubi1:textures is mounted. [2025-09-24 13:01:12.272] ubi0:animations is mounted. [2025-09-24 13:01:12.288] ubi2:dml_code is mounted. [2025-09-24 13:01:12.288] RTNETLINK answers: File exists [2025-09-24 13:01:12.333] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:01:12.333] data.LB_FadeInType0=100 [2025-09-24 13:01:12.333] data.CHLH_FadeInType0=0 [2025-09-24 13:01:12.333] data.WU_FadeInDelay=0 [2025-09-24 13:01:12.333] max_time_out=0 [2025-09-24 13:01:12.333] No splash screen [2025-09-24 13:01:12.333] stop dss Done [2025-09-24 13:01:12.333] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:01:12.333] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:01:12.333] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:01:12.333] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:01:12.403] /dev/mem opened. [2025-09-24 13:01:12.403] Memory mapped at address 0xffff8309e000. [2025-09-24 13:01:12.403] Read at address 0x00600018 (0xffff8309e018): 0x00000000 [2025-09-24 13:01:12.403] Write at address 0x00600018 (0xffff8309e018): 0x00400040, readback 0x00400040 [2025-09-24 13:01:12.435] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:01:12.467] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:01:12.643] Loaded PowerVR consumer services. [2025-09-24 13:01:12.687] Waiting data available... [2025-09-24 13:01:12.687] 512+0 records in [2025-09-24 13:01:12.687] 512+0 records out [2025-09-24 13:01:12.703] Starting syslogd/klogd: done [2025-09-24 13:01:12.718] DML Start [2025-09-24 13:01:12.911] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:01:13.151] DML res1: 0 [2025-09-24 13:01:13.566] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:01:13.582] Read Success [2025-09-24 13:01:13.582] Verifying certificate... [2025-09-24 13:01:13.870] Verified OK [2025-09-24 13:01:13.870] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:01:15.660] Verified OK [2025-09-24 13:01:15.660] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:01:16.187] Verified OK [2025-09-24 13:01:16.203] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:01:18.650] fs.protected_hardlinks = 1 [2025-09-24 13:01:18.650] fs.protected_symlinks = 1 [2025-09-24 13:01:18.666] kernel.modules_disabled = 1 [2025-09-24 13:01:18.858] [2025-09-24 13:01:18.858] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:01:20.201] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:01:27.903] SBL1:1210.0.1.0 [2025-09-24 13:01:27.951] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:01:29.517] SBL2:1210.0.1.0 [2025-09-24 13:01:29.565] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:01:29.662] j-A [2025-09-24 13:01:37.016] The R5 Autosar Classic is running [2025-09-24 13:01:37.038] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:01:37.038] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:01:37.647] INIT: version 2.96 booting [2025-09-24 13:01:37.758] INIT: Entering runlevel: 5 [2025-09-24 13:01:37.902] mtd24 attached [2025-09-24 13:01:37.918] mtd28 attached [2025-09-24 13:01:37.933] mtd32 attached [2025-09-24 13:01:37.966] ubi0:textures is mounted. [2025-09-24 13:01:37.982] ubi1:animations is mounted. [2025-09-24 13:01:37.982] RTNETLINK answers: File exists [2025-09-24 13:01:38.039] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:01:38.039] ubi2:dml_code is mounted. [2025-09-24 13:01:38.039] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:01:38.039] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:01:38.039] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:01:38.039] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:01:38.039] data.LB_FadeInType0=100 [2025-09-24 13:01:38.039] data.CHLH_FadeInType0=0 [2025-09-24 13:01:38.039] data.WU_FadeInDelay=0 [2025-09-24 13:01:38.039] max_time_out=0 [2025-09-24 13:01:38.039] No splash screen [2025-09-24 13:01:38.039] stop dss Done [2025-09-24 13:01:38.080] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:01:38.080] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:01:38.121] /dev/mem opened. [2025-09-24 13:01:38.121] Memory mapped at address 0xffffa908d000. [2025-09-24 13:01:38.121] Read at address 0x00600018 (0xffffa908d018): 0x00000000 [2025-09-24 13:01:38.121] Write at address 0x00600018 (0xffffa908d018): 0x00400040, readback 0x00400040 [2025-09-24 13:01:38.249] Loaded PowerVR consumer services. [2025-09-24 13:01:38.377] Waiting data available... [2025-09-24 13:01:38.392] 512+0 records in [2025-09-24 13:01:38.392] 512+0 records out [2025-09-24 13:01:38.408] Starting syslogd/klogd: done [2025-09-24 13:01:38.424] DML Start [2025-09-24 13:01:38.617] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:01:38.840] DML res1: 0 [2025-09-24 13:01:39.251] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:01:39.251] Read Success [2025-09-24 13:01:39.251] Verifying certificate... [2025-09-24 13:01:39.522] Verified OK [2025-09-24 13:01:39.539] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:01:41.122] Verified OK [2025-09-24 13:01:41.122] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:01:41.745] Verified OK [2025-09-24 13:01:41.745] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:01:44.416] fs.protected_hardlinks = 1 [2025-09-24 13:01:44.416] fs.protected_symlinks = 1 [2025-09-24 13:01:44.432] kernel.modules_disabled = 1 [2025-09-24 13:01:44.607] [2025-09-24 13:01:44.607] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:01:45.868] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:01:53.623] SBL1:1210.0.1.0 [2025-09-24 13:01:53.670] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:01:55.237] SBL2:1210.0.1.0 [2025-09-24 13:01:55.284] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:01:55.381] j-A [2025-09-24 13:02:02.735] The R5 Autosar Classic is running [2025-09-24 13:02:02.759] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:02:02.759] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:02:03.366] INIT: version 2.96 booting [2025-09-24 13:02:03.478] INIT: Entering runlevel: 5 [2025-09-24 13:02:03.638] mtd24 attached [2025-09-24 13:02:03.638] mtd28 attached [2025-09-24 13:02:03.654] mtd32 attached [2025-09-24 13:02:03.702] ubi0:textures is mounted. [2025-09-24 13:02:03.702] RTNETLINK answers: File exists [2025-09-24 13:02:03.741] ubi1:animations is mounted. [2025-09-24 13:02:03.741] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:02:03.741] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:02:03.741] ubi2:dml_code is mounted. [2025-09-24 13:02:03.741] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:02:03.741] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:02:03.741] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:02:03.767] data.LB_FadeInType0=100 [2025-09-24 13:02:03.767] data.CHLH_FadeInType0=0 [2025-09-24 13:02:03.767] data.WU_FadeInDelay=0 [2025-09-24 13:02:03.767] max_time_out=0 [2025-09-24 13:02:03.767] No splash screen [2025-09-24 13:02:03.767] stop dss Done [2025-09-24 13:02:03.799] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:02:03.831] /dev/mem opened. [2025-09-24 13:02:03.831] Memory mapped at address 0xffffb3475000. [2025-09-24 13:02:03.831] Read at address 0x00600018 (0xffffb3475018): 0x00000000 [2025-09-24 13:02:03.831] Write at address 0x00600018 (0xffffb3475018): 0x00400040, readback 0x00400040 [2025-09-24 13:02:03.831] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:02:03.911] Loaded PowerVR consumer services. [2025-09-24 13:02:04.088] Waiting data available... [2025-09-24 13:02:04.104] 512+0 records in [2025-09-24 13:02:04.104] 512+0 records out [2025-09-24 13:02:04.120] Starting syslogd/klogd: done [2025-09-24 13:02:04.152] DML Start [2025-09-24 13:02:04.343] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:02:04.551] DML res1: 0 [2025-09-24 13:02:04.978] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:02:04.978] Read Success [2025-09-24 13:02:04.978] Verifying certificate... [2025-09-24 13:02:05.234] Verified OK [2025-09-24 13:02:05.234] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:02:06.860] Verified OK [2025-09-24 13:02:06.860] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:02:07.526] Verified OK [2025-09-24 13:02:07.526] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:02:10.244] fs.protected_hardlinks = 1 [2025-09-24 13:02:10.260] fs.protected_symlinks = 1 [2025-09-24 13:02:10.260] kernel.modules_disabled = 1 [2025-09-24 13:02:10.452] [2025-09-24 13:02:10.452] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:02:11.603] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:02:19.325] SBL1:1210.0.1.0 [2025-09-24 13:02:19.373] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:02:20.939] SBL2:1210.0.1.0 [2025-09-24 13:02:20.987] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:02:21.083] j-A [2025-09-24 13:02:28.437] The R5 Autosar Classic is running [2025-09-24 13:02:28.459] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:02:28.459] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:02:29.066] INIT: version 2.96 booting [2025-09-24 13:02:29.179] INIT: Entering runlevel: 5 [2025-09-24 13:02:29.322] mtd24 attached [2025-09-24 13:02:29.354] mtd28 attached [2025-09-24 13:02:29.370] ubi0:textures is mounted. [2025-09-24 13:02:29.386] mtd32 attached [2025-09-24 13:02:29.386] ubi1:animations is mounted. [2025-09-24 13:02:29.462] RTNETLINK answers: File exists [2025-09-24 13:02:29.462] ubi2:dml_code is mounted. [2025-09-24 13:02:29.462] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:02:29.462] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:02:29.462] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:02:29.462] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:02:29.462] data.LB_FadeInType0=100 [2025-09-24 13:02:29.462] data.CHLH_FadeInType0=0 [2025-09-24 13:02:29.462] data.WU_FadeInDelay=0 [2025-09-24 13:02:29.462] max_time_out=0 [2025-09-24 13:02:29.462] No splash screen [2025-09-24 13:02:29.462] stop dss Done [2025-09-24 13:02:29.462] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:02:29.549] /dev/mem opened. [2025-09-24 13:02:29.549] Memory mapped at address 0xffff9a758000. [2025-09-24 13:02:29.549] Read at address 0x00600018 (0xffff9a758018): 0x00000000 [2025-09-24 13:02:29.549] Write at address 0x00600018 (0xffff9a758018): 0x00400040, readback 0x00400040 [2025-09-24 13:02:29.580] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:02:29.580] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:02:29.660] Loaded PowerVR consumer services. [2025-09-24 13:02:29.787] Waiting data available... [2025-09-24 13:02:29.803] 512+0 records in [2025-09-24 13:02:29.803] 512+0 records out [2025-09-24 13:02:29.835] Starting syslogd/klogd: done [2025-09-24 13:02:29.868] DML Start [2025-09-24 13:02:30.028] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:02:30.252] DML res1: 0 [2025-09-24 13:02:30.724] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:02:30.724] Read Success [2025-09-24 13:02:30.724] Verifying certificate... [2025-09-24 13:02:31.012] Verified OK [2025-09-24 13:02:31.028] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:02:32.685] Verified OK [2025-09-24 13:02:32.685] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:02:33.252] Verified OK [2025-09-24 13:02:33.252] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:02:35.953] fs.protected_hardlinks = 1 [2025-09-24 13:02:35.953] fs.protected_symlinks = 1 [2025-09-24 13:02:35.969] kernel.modules_disabled = 1 [2025-09-24 13:02:36.161] [2025-09-24 13:02:36.161] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:02:37.310] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:02:45.040] SBL1:1210.0.1.0 [2025-09-24 13:02:45.072] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:02:46.656] SBL2:1210.0.1.0 [2025-09-24 13:02:46.688] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:02:46.800] j-A [2025-09-24 13:02:54.171] The R5 Autosar Classic is running [2025-09-24 13:02:54.171] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:02:54.171] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:02:54.778] INIT: version 2.96 booting [2025-09-24 13:02:54.891] INIT: Entering runlevel: 5 [2025-09-24 13:02:55.050] mtd24 attached [2025-09-24 13:02:55.050] mtd28 attached [2025-09-24 13:02:55.067] mtd32 attached [2025-09-24 13:02:55.114] RTNETLINK answers: File exists [2025-09-24 13:02:55.114] ubi0:textures is mounted. [2025-09-24 13:02:55.182] ubi1:animations is mounted. [2025-09-24 13:02:55.182] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:02:55.182] ubi2:dml_code is mounted. [2025-09-24 13:02:55.182] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:02:55.182] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:02:55.182] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:02:55.182] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:02:55.182] data.LB_FadeInType0=100 [2025-09-24 13:02:55.182] data.CHLH_FadeInType0=0 [2025-09-24 13:02:55.182] data.WU_FadeInDelay=0 [2025-09-24 13:02:55.182] max_time_out=0 [2025-09-24 13:02:55.182] No splash screen [2025-09-24 13:02:55.182] stop dss Done [2025-09-24 13:02:55.261] /dev/mem opened. [2025-09-24 13:02:55.261] Memory mapped at address 0xffff990d8000. [2025-09-24 13:02:55.261] Read at address 0x00600018 (0xffff990d8018): 0x00000000 [2025-09-24 13:02:55.261] Write at address 0x00600018 (0xffff990d8018): 0x00400040, readback 0x00400040 [2025-09-24 13:02:55.261] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:02:55.277] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:02:55.438] Loaded PowerVR consumer services. [2025-09-24 13:02:55.529] Waiting data available... [2025-09-24 13:02:55.529] 512+0 records in [2025-09-24 13:02:55.529] 512+0 records out [2025-09-24 13:02:55.561] Starting syslogd/klogd: done [2025-09-24 13:02:55.577] DML Start [2025-09-24 13:02:55.721] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:02:55.897] DML res1: 0 [2025-09-24 13:02:56.489] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:02:56.510] Read Success [2025-09-24 13:02:56.510] Verifying certificate... [2025-09-24 13:02:56.749] Verified OK [2025-09-24 13:02:56.765] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:02:58.492] Verified OK [2025-09-24 13:02:58.492] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:02:59.019] Verified OK [2025-09-24 13:02:59.019] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:03:01.514] fs.protected_hardlinks = 1 [2025-09-24 13:03:01.514] fs.protected_symlinks = 1 [2025-09-24 13:03:01.529] kernel.modules_disabled = 1 [2025-09-24 13:03:01.721] [2025-09-24 13:03:01.721] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:03:03.091] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:03:10.735] SBL1:1210.0.1.0 [2025-09-24 13:03:10.767] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:03:12.350] SBL2:1210.0.1.0 [2025-09-24 13:03:12.381] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:03:12.494] j-A [2025-09-24 13:03:19.847] The R5 Autosar Classic is running [2025-09-24 13:03:19.847] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:03:19.868] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:03:20.476] INIT: version 2.96 booting [2025-09-24 13:03:20.588] INIT: Entering runlevel: 5 [2025-09-24 13:03:20.748] mtd28 attached [2025-09-24 13:03:20.748] mtd32 attached [2025-09-24 13:03:20.764] mtd24 attached [2025-09-24 13:03:20.780] ubi0:animations is mounted. [2025-09-24 13:03:20.812] RTNETLINK answers: File exists [2025-09-24 13:03:20.812] ubi1:dml_code is mounted. [2025-09-24 13:03:20.872] ubi2:textures is mounted. [2025-09-24 13:03:20.872] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:03:20.872] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:03:20.872] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:03:20.872] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:03:20.872] data.LB_FadeInType0=100 [2025-09-24 13:03:20.872] data.CHLH_FadeInType0=0 [2025-09-24 13:03:20.872] data.WU_FadeInDelay=0 [2025-09-24 13:03:20.872] max_time_out=0 [2025-09-24 13:03:20.872] No splash screen [2025-09-24 13:03:20.872] stop dss Done [2025-09-24 13:03:20.872] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:03:20.920] /dev/mem opened. [2025-09-24 13:03:20.920] Memory mapped at address 0xffff8febe000. [2025-09-24 13:03:20.946] Read at address 0x00600018 (0xffff8febe018): 0x00000000 [2025-09-24 13:03:20.946] Write at address 0x00600018 (0xffff8febe018): 0x00400040, readback 0x00400040 [2025-09-24 13:03:20.946] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:03:20.962] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:03:21.106] Loaded PowerVR consumer services. [2025-09-24 13:03:21.232] Waiting data available... [2025-09-24 13:03:21.232] 512+0 records in [2025-09-24 13:03:21.232] 512+0 records out [2025-09-24 13:03:21.248] Starting syslogd/klogd: done [2025-09-24 13:03:21.264] DML Start [2025-09-24 13:03:21.439] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:03:21.664] DML res1: 0 [2025-09-24 13:03:22.107] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:03:22.107] Read Success [2025-09-24 13:03:22.107] Verifying certificate... [2025-09-24 13:03:22.378] Verified OK [2025-09-24 13:03:22.394] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:03:24.025] Verified OK [2025-09-24 13:03:24.025] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:03:24.632] Verified OK [2025-09-24 13:03:24.632] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:03:27.286] fs.protected_hardlinks = 1 [2025-09-24 13:03:27.286] fs.protected_symlinks = 1 [2025-09-24 13:03:27.301] kernel.modules_disabled = 1 [2025-09-24 13:03:27.478] [2025-09-24 13:03:27.494] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:03:28.738] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:03:36.446] SBL1:1210.0.1.0 [2025-09-24 13:03:36.493] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:03:38.061] SBL2:1210.0.1.0 [2025-09-24 13:03:38.108] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:03:38.204] j-A [2025-09-24 13:03:45.558] The R5 Autosar Classic is running [2025-09-24 13:03:45.582] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:03:45.582] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:03:46.190] INIT: version 2.96 booting [2025-09-24 13:03:46.302] INIT: Entering runlevel: 5 [2025-09-24 13:03:46.445] mtd24 attached [2025-09-24 13:03:46.461] mtd28 attached [2025-09-24 13:03:46.461] mtd32 attached [2025-09-24 13:03:46.509] ubi0:textures is mounted. [2025-09-24 13:03:46.580] RTNETLINK answers: File exists [2025-09-24 13:03:46.580] ubi1:animations is mounted. [2025-09-24 13:03:46.580] ubi2:dml_code is mounted. [2025-09-24 13:03:46.580] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:03:46.580] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:03:46.580] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:03:46.580] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:03:46.580] data.LB_FadeInType0=100 [2025-09-24 13:03:46.580] data.CHLH_FadeInType0=0 [2025-09-24 13:03:46.580] data.WU_FadeInDelay=0 [2025-09-24 13:03:46.580] max_time_out=0 [2025-09-24 13:03:46.580] No splash screen [2025-09-24 13:03:46.580] stop dss Done [2025-09-24 13:03:46.580] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:03:46.613] /dev/mem opened. [2025-09-24 13:03:46.613] Memory mapped at address 0xffffa64d5000. [2025-09-24 13:03:46.639] Read at address 0x00600018 (0xffffa64d5018): 0x00000000 [2025-09-24 13:03:46.639] Write at address 0x00600018 (0xffffa64d5018): 0x00400040, readback 0x00400040 [2025-09-24 13:03:46.670] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:03:46.702] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:03:46.765] Loaded PowerVR consumer services. [2025-09-24 13:03:46.909] Waiting data available... [2025-09-24 13:03:46.941] 512+0 records in [2025-09-24 13:03:46.941] 512+0 records out [2025-09-24 13:03:46.989] Starting syslogd/klogd: done [2025-09-24 13:03:47.005] DML Start [2025-09-24 13:03:47.197] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:03:47.405] DML res1: 0 [2025-09-24 13:03:47.850] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:03:47.850] Read Success [2025-09-24 13:03:47.850] Verifying certificate... [2025-09-24 13:03:48.090] Verified OK [2025-09-24 13:03:48.105] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:03:49.858] Verified OK [2025-09-24 13:03:49.858] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:03:50.327] Verified OK [2025-09-24 13:03:50.327] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:03:52.725] fs.protected_hardlinks = 1 [2025-09-24 13:03:52.755] fs.protected_symlinks = 1 [2025-09-24 13:03:52.755] kernel.modules_disabled = 1 [2025-09-24 13:03:52.932] [2025-09-24 13:03:52.932] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:03:54.498] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:04:02.175] SBL1:1210.0.1.0 [2025-09-24 13:04:02.207] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:04:03.789] SBL2:1210.0.1.0 [2025-09-24 13:04:03.821] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:04:03.934] j-A [2025-09-24 13:04:11.308] The R5 Autosar Classic is running [2025-09-24 13:04:11.308] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:04:11.308] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:04:11.916] INIT: version 2.96 booting [2025-09-24 13:04:12.027] INIT: Entering runlevel: 5 [2025-09-24 13:04:12.172] mtd24 attached [2025-09-24 13:04:12.188] mtd28 attached [2025-09-24 13:04:12.204] mtd32 attached [2025-09-24 13:04:12.286] ubi0:textures is mounted. [2025-09-24 13:04:12.286] RTNETLINK answers: File exists [2025-09-24 13:04:12.286] ubi1:animations is mounted. [2025-09-24 13:04:12.286] ubi2:dml_code is mounted. [2025-09-24 13:04:12.286] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:04:12.286] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:04:12.286] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:04:12.326] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:04:12.326] data.LB_FadeInType0=100 [2025-09-24 13:04:12.326] data.CHLH_FadeInType0=0 [2025-09-24 13:04:12.326] data.WU_FadeInDelay=0 [2025-09-24 13:04:12.326] max_time_out=0 [2025-09-24 13:04:12.326] No splash screen [2025-09-24 13:04:12.326] stop dss Done [2025-09-24 13:04:12.326] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:04:12.358] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:04:12.374] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:04:12.415] /dev/mem opened. [2025-09-24 13:04:12.415] Memory mapped at address 0xffffa11a8000. [2025-09-24 13:04:12.415] Read at address 0x00600018 (0xffffa11a8018): 0x00000000 [2025-09-24 13:04:12.415] Write at address 0x00600018 (0xffffa11a8018): 0x00400040, readback 0x00400040 [2025-09-24 13:04:12.608] Loaded PowerVR consumer services. [2025-09-24 13:04:12.655] 512+0 records in [2025-09-24 13:04:12.655] 512+0 records out [2025-09-24 13:04:12.655] Waiting data available... [2025-09-24 13:04:12.687] Starting syslogd/klogd: done [2025-09-24 13:04:12.703] DML Start [2025-09-24 13:04:12.895] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:04:13.119] DML res1: 0 [2025-09-24 13:04:13.563] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:04:13.563] Read Success [2025-09-24 13:04:13.563] Verifying certificate... [2025-09-24 13:04:13.786] Verified OK [2025-09-24 13:04:13.802] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:04:15.534] Verified OK [2025-09-24 13:04:15.534] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:04:16.108] Verified OK [2025-09-24 13:04:16.109] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:04:18.714] fs.protected_hardlinks = 1 [2025-09-24 13:04:18.741] fs.protected_symlinks = 1 [2025-09-24 13:04:18.741] kernel.modules_disabled = 1 [2025-09-24 13:04:18.917] [2025-09-24 13:04:18.917] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:04:20.122] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:04:27.872] SBL1:1210.0.1.0 [2025-09-24 13:04:27.920] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:04:29.487] SBL2:1210.0.1.0 [2025-09-24 13:04:29.535] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:04:29.631] j-A [2025-09-24 13:04:36.986] The R5 Autosar Classic is running [2025-09-24 13:04:37.008] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:04:37.008] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:04:37.615] INIT: version 2.96 booting [2025-09-24 13:04:37.727] INIT: Entering runlevel: 5 [2025-09-24 13:04:37.871] mtd24 attached [2025-09-24 13:04:37.887] mtd32 attached [2025-09-24 13:04:37.902] mtd28 attached [2025-09-24 13:04:37.934] ubi0:textures is mounted. [2025-09-24 13:04:37.950] RTNETLINK answers: File exists [2025-09-24 13:04:37.951] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:04:38.008] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:04:38.008] ubi2:animations is mounted. [2025-09-24 13:04:38.008] ubi1:dml_code is mounted. [2025-09-24 13:04:38.008] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:04:38.008] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:04:38.008] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:04:38.008] data.LB_FadeInType0=100 [2025-09-24 13:04:38.008] data.CHLH_FadeInType0=0 [2025-09-24 13:04:38.008] data.WU_FadeInDelay=0 [2025-09-24 13:04:38.008] max_time_out=0 [2025-09-24 13:04:38.008] No splash screen [2025-09-24 13:04:38.008] stop dss Done [2025-09-24 13:04:38.040] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:04:38.056] /dev/mem opened. [2025-09-24 13:04:38.088] Memory mapped at address 0xffff80295000. [2025-09-24 13:04:38.088] Read at address 0x00600018 (0xffff80295018): 0x00000000 [2025-09-24 13:04:38.088] Write at address 0x00600018 (0xffff80295018): 0x00400040, readback 0x00400040 [2025-09-24 13:04:38.088] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:04:38.168] Loaded PowerVR consumer services. [2025-09-24 13:04:38.343] Waiting data available... [2025-09-24 13:04:38.359] 512+0 records in [2025-09-24 13:04:38.359] 512+0 records out [2025-09-24 13:04:38.392] Starting syslogd/klogd: done [2025-09-24 13:04:38.408] DML Start [2025-09-24 13:04:38.567] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:04:38.807] DML res1: 0 [2025-09-24 13:04:39.222] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:04:39.243] Read Success [2025-09-24 13:04:39.243] Verifying certificate... [2025-09-24 13:04:39.484] Verified OK [2025-09-24 13:04:39.500] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:04:41.208] Verified OK [2025-09-24 13:04:41.208] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:04:41.800] Verified OK [2025-09-24 13:04:41.816] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:04:44.421] fs.protected_hardlinks = 1 [2025-09-24 13:04:44.437] fs.protected_symlinks = 1 [2025-09-24 13:04:44.437] kernel.modules_disabled = 1 [2025-09-24 13:04:44.629] [2025-09-24 13:04:44.629] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:04:45.873] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:04:53.572] SBL1:1210.0.1.0 [2025-09-24 13:04:53.620] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:04:55.187] SBL2:1210.0.1.0 [2025-09-24 13:04:55.235] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:04:55.331] j-A [2025-09-24 13:05:02.687] The R5 Autosar Classic is running [2025-09-24 13:05:02.710] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:05:02.710] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:05:03.317] INIT: version 2.96 booting [2025-09-24 13:05:03.430] INIT: Entering runlevel: 5 [2025-09-24 13:05:03.574] mtd24 attached [2025-09-24 13:05:03.589] mtd28 attached [2025-09-24 13:05:03.605] mtd32 attached [2025-09-24 13:05:03.690] RTNETLINK answers: File exists [2025-09-24 13:05:03.690] ubi0:textures is mounted. [2025-09-24 13:05:03.690] ubi1:animations is mounted. [2025-09-24 13:05:03.690] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:05:03.690] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:05:03.690] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:05:03.690] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:05:03.690] ubi2:dml_code is mounted. [2025-09-24 13:05:03.690] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:05:03.707] data.LB_FadeInType0=100 [2025-09-24 13:05:03.707] data.CHLH_FadeInType0=0 [2025-09-24 13:05:03.728] data.WU_FadeInDelay=0 [2025-09-24 13:05:03.728] max_time_out=0 [2025-09-24 13:05:03.728] No splash screen [2025-09-24 13:05:03.728] stop dss Done [2025-09-24 13:05:03.773] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:05:03.773] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:05:03.789] /dev/mem opened. [2025-09-24 13:05:03.789] Memory mapped at address 0xffff8bcf1000. [2025-09-24 13:05:03.814] Read at address 0x00600018 (0xffff8bcf1018): 0x00000000 [2025-09-24 13:05:03.814] Write at address 0x00600018 (0xffff8bcf1018): 0x00400040, readback 0x00400040 [2025-09-24 13:05:04.039] Loaded PowerVR consumer services. [2025-09-24 13:05:04.055] Waiting data available... [2025-09-24 13:05:04.070] 512+0 records in [2025-09-24 13:05:04.070] 512+0 records out [2025-09-24 13:05:04.119] Starting syslogd/klogd: done [2025-09-24 13:05:04.134] DML Start [2025-09-24 13:05:04.326] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:05:04.502] DML res1: 0 [2025-09-24 13:05:04.972] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:05:04.972] Read Success [2025-09-24 13:05:04.972] Verifying certificate... [2025-09-24 13:05:05.245] Verified OK [2025-09-24 13:05:05.276] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:05:06.920] Verified OK [2025-09-24 13:05:06.920] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:05:07.500] Verified OK [2025-09-24 13:05:07.500] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:05:10.186] fs.protected_hardlinks = 1 [2025-09-24 13:05:10.202] fs.protected_symlinks = 1 [2025-09-24 13:05:10.202] kernel.modules_disabled = 1 [2025-09-24 13:05:10.410] [2025-09-24 13:05:10.410] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:05:11.561] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:05:19.307] SBL1:1210.0.1.0 [2025-09-24 13:05:19.355] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:05:20.921] SBL2:1210.0.1.0 [2025-09-24 13:05:20.969] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:05:21.065] j-A [2025-09-24 13:05:28.420] The R5 Autosar Classic is running [2025-09-24 13:05:28.420] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:05:28.441] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:05:29.049] INIT: version 2.96 booting [2025-09-24 13:05:29.161] INIT: Entering runlevel: 5 [2025-09-24 13:05:29.305] mtd24 attached [2025-09-24 13:05:29.321] mtd28 attached [2025-09-24 13:05:29.336] mtd32 attached [2025-09-24 13:05:29.352] ubi0:textures is mounted. [2025-09-24 13:05:29.384] ubi1:animations is mounted. [2025-09-24 13:05:29.384] RTNETLINK answers: File exists [2025-09-24 13:05:29.441] ubi2:dml_code is mounted. [2025-09-24 13:05:29.441] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:05:29.441] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:05:29.441] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:05:29.441] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:05:29.441] data.LB_FadeInType0=100 [2025-09-24 13:05:29.441] data.CHLH_FadeInType0=0 [2025-09-24 13:05:29.441] data.WU_FadeInDelay=0 [2025-09-24 13:05:29.441] max_time_out=0 [2025-09-24 13:05:29.441] No splash screen [2025-09-24 13:05:29.441] stop dss Done [2025-09-24 13:05:29.441] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:05:29.513] /dev/mem opened. [2025-09-24 13:05:29.513] Memory mapped at address 0xffffa3187000. [2025-09-24 13:05:29.513] Read at address 0x00600018 (0xffffa3187018): 0x00000000 [2025-09-24 13:05:29.513] Write at address 0x00600018 (0xffffa3187018): 0x00400040, readback 0x00400040 [2025-09-24 13:05:29.529] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:05:29.545] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:05:29.769] Loaded PowerVR consumer services. [2025-09-24 13:05:29.785] Waiting data available... [2025-09-24 13:05:29.800] 512+0 records in [2025-09-24 13:05:29.800] 512+0 records out [2025-09-24 13:05:29.864] Starting syslogd/klogd: done [2025-09-24 13:05:29.880] DML Start [2025-09-24 13:05:30.088] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:05:30.312] DML res1: 0 [2025-09-24 13:05:30.662] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:05:30.662] Read Success [2025-09-24 13:05:30.664] Verifying certificate... [2025-09-24 13:05:30.983] Verified OK [2025-09-24 13:05:30.999] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:05:32.783] Verified OK [2025-09-24 13:05:32.783] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:05:33.332] Verified OK [2025-09-24 13:05:33.332] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:05:35.842] fs.protected_hardlinks = 1 [2025-09-24 13:05:35.842] fs.protected_symlinks = 1 [2025-09-24 13:05:35.858] kernel.modules_disabled = 1 [2025-09-24 13:05:36.050] [2025-09-24 13:05:36.050] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:05:37.385] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:05:45.035] SBL1:1210.0.1.0 [2025-09-24 13:05:45.067] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:05:46.650] SBL2:1210.0.1.0 [2025-09-24 13:05:46.682] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:05:46.794] j-A [2025-09-24 13:05:54.166] The R5 Autosar Classic is running [2025-09-24 13:05:54.166] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:05:54.166] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:05:54.775] INIT: version 2.96 booting [2025-09-24 13:05:54.886] INIT: Entering runlevel: 5 [2025-09-24 13:05:55.030] mtd24 attached [2025-09-24 13:05:55.046] mtd28 attached [2025-09-24 13:05:55.062] mtd32 attached [2025-09-24 13:05:55.094] ubi0:textures is mounted. [2025-09-24 13:05:55.163] RTNETLINK answers: File exists [2025-09-24 13:05:55.163] ubi1:animations is mounted. [2025-09-24 13:05:55.163] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:05:55.163] ubi2:dml_code is mounted. [2025-09-24 13:05:55.163] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:05:55.163] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:05:55.163] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:05:55.163] data.LB_FadeInType0=100 [2025-09-24 13:05:55.163] data.CHLH_FadeInType0=0 [2025-09-24 13:05:55.163] data.WU_FadeInDelay=0 [2025-09-24 13:05:55.163] max_time_out=0 [2025-09-24 13:05:55.163] No splash screen [2025-09-24 13:05:55.163] stop dss Done [2025-09-24 13:05:55.163] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:05:55.195] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:05:55.240] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:05:55.240] /dev/mem opened. [2025-09-24 13:05:55.240] Memory mapped at address 0xffff993bf000. [2025-09-24 13:05:55.240] Read at address 0x00600018 (0xffff993bf018): 0x00000000 [2025-09-24 13:05:55.240] Write at address 0x00600018 (0xffff993bf018): 0x00400040, readback 0x00400040 [2025-09-24 13:05:55.496] Loaded PowerVR consumer services. [2025-09-24 13:05:55.496] Waiting data available... [2025-09-24 13:05:55.528] 512+0 records in [2025-09-24 13:05:55.528] 512+0 records out [2025-09-24 13:05:55.560] Starting syslogd/klogd: done [2025-09-24 13:05:55.576] DML Start [2025-09-24 13:05:55.768] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:05:55.976] DML res1: 0 [2025-09-24 13:05:56.415] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:05:56.415] Read Success [2025-09-24 13:05:56.415] Verifying certificate... [2025-09-24 13:05:56.656] Verified OK [2025-09-24 13:05:56.671] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:05:58.315] Verified OK [2025-09-24 13:05:58.315] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:05:58.955] Verified OK [2025-09-24 13:05:58.955] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:06:01.560] fs.protected_hardlinks = 1 [2025-09-24 13:06:01.577] fs.protected_symlinks = 1 [2025-09-24 13:06:01.577] kernel.modules_disabled = 1 [2025-09-24 13:06:01.785] [2025-09-24 13:06:01.785] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:06:03.000] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:06:10.733] SBL1:1210.0.1.0 [2025-09-24 13:06:10.780] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:06:12.347] SBL2:1210.0.1.0 [2025-09-24 13:06:12.395] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 13:06:12.491] j-A [2025-09-24 13:06:19.845] The R5 Autosar Classic is running [2025-09-24 13:06:19.867] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:06:19.867] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:06:20.475] INIT: version 2.96 booting [2025-09-24 13:06:20.587] INIT: Entering runlevel: 5 [2025-09-24 13:06:20.746] mtd32 attached [2025-09-24 13:06:20.746] mtd28 attached [2025-09-24 13:06:20.762] mtd24 attached [2025-09-24 13:06:20.794] ubi0:dml_code is mounted. [2025-09-24 13:06:20.810] RTNETLINK answers: File exists [2025-09-24 13:06:20.872] ubi1:animations is mounted. [2025-09-24 13:06:20.872] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:06:20.872] ubi2:textures is mounted. [2025-09-24 13:06:20.872] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:06:20.872] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:06:20.872] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:06:20.872] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:06:20.872] data.LB_FadeInType0=100 [2025-09-24 13:06:20.872] data.CHLH_FadeInType0=0 [2025-09-24 13:06:20.872] data.WU_FadeInDelay=0 [2025-09-24 13:06:20.872] max_time_out=0 [2025-09-24 13:06:20.872] No splash screen [2025-09-24 13:06:20.872] stop dss Done [2025-09-24 13:06:20.904] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:06:20.949] /dev/mem opened. [2025-09-24 13:06:20.949] Memory mapped at address 0xffffa78cb000. [2025-09-24 13:06:20.949] Read at address 0x00600018 (0xffffa78cb018): 0x00000000 [2025-09-24 13:06:20.949] Write at address 0x00600018 (0xffffa78cb018): 0x00400040, readback 0x00400040 [2025-09-24 13:06:20.949] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:06:21.044] Loaded PowerVR consumer services. [2025-09-24 13:06:21.188] Waiting data available... [2025-09-24 13:06:21.204] 512+0 records in [2025-09-24 13:06:21.204] 512+0 records out [2025-09-24 13:06:21.237] Starting syslogd/klogd: done [2025-09-24 13:06:21.268] DML Start [2025-09-24 13:06:21.444] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:06:21.684] DML res1: 0 [2025-09-24 13:06:22.052] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:06:22.068] Read Success [2025-09-24 13:06:22.068] Verifying certificate... [2025-09-24 13:06:22.308] Verified OK [2025-09-24 13:06:22.324] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:06:24.002] Verified OK [2025-09-24 13:06:24.002] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:06:24.650] Verified OK [2025-09-24 13:06:24.650] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:06:27.382] fs.protected_hardlinks = 1 [2025-09-24 13:06:27.382] fs.protected_symlinks = 1 [2025-09-24 13:06:27.382] kernel.modules_disabled = 1 [2025-09-24 13:06:27.574] [2025-09-24 13:06:27.574] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:06:28.713] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:06:36.459] SBL1:1210.0.1.0 [2025-09-24 13:06:36.491] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:06:38.075] SBL2:1210.0.1.0 [2025-09-24 13:06:38.106] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:06:38.218] j-A [2025-09-24 13:06:45.589] The R5 Autosar Classic is running [2025-09-24 13:06:45.589] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:06:45.589] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:06:46.197] INIT: version 2.96 booting [2025-09-24 13:06:46.309] INIT: Entering runlevel: 5 [2025-09-24 13:06:46.452] mtd24 attached [2025-09-24 13:06:46.468] mtd28 attached [2025-09-24 13:06:46.484] mtd32 attached [2025-09-24 13:06:46.532] RTNETLINK answers: File exists [2025-09-24 13:06:46.532] ubi0:textures is mounted. [2025-09-24 13:06:46.572] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:06:46.572] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:06:46.572] ubi2:dml_code is mounted. [2025-09-24 13:06:46.572] ubi1:animations is mounted. [2025-09-24 13:06:46.572] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:06:46.572] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:06:46.572] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:06:46.599] data.LB_FadeInType0=100 [2025-09-24 13:06:46.599] data.CHLH_FadeInType0=0 [2025-09-24 13:06:46.599] data.WU_FadeInDelay=0 [2025-09-24 13:06:46.599] max_time_out=0 [2025-09-24 13:06:46.599] No splash screen [2025-09-24 13:06:46.599] stop dss Done [2025-09-24 13:06:46.666] /dev/mem opened. [2025-09-24 13:06:46.666] Memory mapped at address 0xffffb228b000. [2025-09-24 13:06:46.666] Read at address 0x00600018 (0xffffb228b018): 0x00000000 [2025-09-24 13:06:46.666] Write at address 0x00600018 (0xffffb228b018): 0x00400040, readback 0x00400040 [2025-09-24 13:06:46.666] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:06:46.682] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:06:46.826] Loaded PowerVR consumer services. [2025-09-24 13:06:46.938] Waiting data available... [2025-09-24 13:06:46.938] 512+0 records in [2025-09-24 13:06:46.938] 512+0 records out [2025-09-24 13:06:46.970] Starting syslogd/klogd: done [2025-09-24 13:06:46.987] DML Start [2025-09-24 13:06:47.162] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:06:47.322] DML res1: 0 [2025-09-24 13:06:47.839] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:06:47.839] Read Success [2025-09-24 13:06:47.839] Verifying certificate... [2025-09-24 13:06:48.094] Verified OK [2025-09-24 13:06:48.110] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:06:49.930] Verified OK [2025-09-24 13:06:49.930] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:06:50.458] Verified OK [2025-09-24 13:06:50.458] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:06:52.904] fs.protected_hardlinks = 1 [2025-09-24 13:06:52.920] fs.protected_symlinks = 1 [2025-09-24 13:06:52.920] kernel.modules_disabled = 1 [2025-09-24 13:06:53.112] [2025-09-24 13:06:53.112] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:06:54.396] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:07:02.154] SBL1:1210.0.1.0 [2025-09-24 13:07:02.202] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:07:03.769] SBL2:1210.0.1.0 [2025-09-24 13:07:03.817] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 13:07:03.912] j-A [2025-09-24 13:07:11.267] The R5 Autosar Classic is running [2025-09-24 13:07:11.291] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:07:11.291] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:07:11.899] INIT: version 2.96 booting [2025-09-24 13:07:12.010] INIT: Entering runlevel: 5 [2025-09-24 13:07:12.171] mtd28 attached [2025-09-24 13:07:12.171] mtd32 attached [2025-09-24 13:07:12.187] mtd24 attached [2025-09-24 13:07:12.202] ubi0:animations is mounted. [2025-09-24 13:07:12.304] RTNETLINK answers: File exists [2025-09-24 13:07:12.304] ubi1:dml_code is mounted. [2025-09-24 13:07:12.304] ubi2:textures is mounted. [2025-09-24 13:07:12.304] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:07:12.304] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:07:12.304] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:07:12.304] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:07:12.304] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:07:12.304] data.LB_FadeInType0=100 [2025-09-24 13:07:12.304] data.CHLH_FadeInType0=0 [2025-09-24 13:07:12.304] data.WU_FadeInDelay=0 [2025-09-24 13:07:12.304] max_time_out=0 [2025-09-24 13:07:12.304] No splash screen [2025-09-24 13:07:12.304] stop dss Done [2025-09-24 13:07:12.320] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:07:12.336] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:07:12.376] /dev/mem opened. [2025-09-24 13:07:12.376] Memory mapped at address 0xffff87c40000. [2025-09-24 13:07:12.376] Read at address 0x00600018 (0xffff87c40018): 0x00000000 [2025-09-24 13:07:12.376] Write at address 0x00600018 (0xffff87c40018): 0x00400040, readback 0x00400040 [2025-09-24 13:07:12.520] Loaded PowerVR consumer services. [2025-09-24 13:07:12.659] Waiting data available... [2025-09-24 13:07:12.659] 512+0 records in [2025-09-24 13:07:12.659] 512+0 records out [2025-09-24 13:07:12.675] Starting syslogd/klogd: done [2025-09-24 13:07:12.707] DML Start [2025-09-24 13:07:12.899] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:07:13.123] DML res1: 0 [2025-09-24 13:07:13.582] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:07:13.582] Read Success [2025-09-24 13:07:13.582] Verifying certificate... [2025-09-24 13:07:13.821] Verified OK [2025-09-24 13:07:13.838] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:07:15.580] Verified OK [2025-09-24 13:07:15.580] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:07:16.181] Verified OK [2025-09-24 13:07:16.181] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:07:18.675] fs.protected_hardlinks = 1 [2025-09-24 13:07:18.705] fs.protected_symlinks = 1 [2025-09-24 13:07:18.705] kernel.modules_disabled = 1 [2025-09-24 13:07:18.880] [2025-09-24 13:07:18.880] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:07:20.125] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:07:27.869] SBL1:1210.0.1.0 [2025-09-24 13:07:27.901] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:07:29.484] SBL2:1210.0.1.0 [2025-09-24 13:07:29.516] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:07:29.627] j-A [2025-09-24 13:07:37.000] The R5 Autosar Classic is running [2025-09-24 13:07:37.000] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:07:37.000] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:07:37.607] INIT: version 2.96 booting [2025-09-24 13:07:37.703] INIT: Entering runlevel: 5 [2025-09-24 13:07:37.862] mtd24 attached [2025-09-24 13:07:37.878] mtd32 attached [2025-09-24 13:07:37.894] mtd28 attached [2025-09-24 13:07:37.910] ubi0:textures is mounted. [2025-09-24 13:07:37.977] RTNETLINK answers: File exists [2025-09-24 13:07:37.977] ubi1:dml_code is mounted. [2025-09-24 13:07:37.977] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:07:37.977] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:07:37.977] ubi2:animations is mounted. [2025-09-24 13:07:37.977] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:07:37.977] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:07:37.977] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:07:37.977] data.LB_FadeInType0=100 [2025-09-24 13:07:37.998] data.CHLH_FadeInType0=0 [2025-09-24 13:07:37.998] data.WU_FadeInDelay=0 [2025-09-24 13:07:37.998] max_time_out=0 [2025-09-24 13:07:37.998] No splash screen [2025-09-24 13:07:37.998] stop dss Done [2025-09-24 13:07:38.047] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:07:38.082] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:07:38.082] /dev/mem opened. [2025-09-24 13:07:38.082] Memory mapped at address 0xffff9a2a8000. [2025-09-24 13:07:38.082] Read at address 0x00600018 (0xffff9a2a8018): 0x00000000 [2025-09-24 13:07:38.082] Write at address 0x00600018 (0xffff9a2a8018): 0x00400040, readback 0x00400040 [2025-09-24 13:07:38.194] Loaded PowerVR consumer services. [2025-09-24 13:07:38.349] Waiting data available... [2025-09-24 13:07:38.349] 512+0 records in [2025-09-24 13:07:38.349] 512+0 records out [2025-09-24 13:07:38.381] Starting syslogd/klogd: done [2025-09-24 13:07:38.397] DML Start [2025-09-24 13:07:38.573] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:07:38.797] DML res1: 0 [2025-09-24 13:07:39.219] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:07:39.219] Read Success [2025-09-24 13:07:39.219] Verifying certificate... [2025-09-24 13:07:39.459] Verified OK [2025-09-24 13:07:39.475] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:07:41.233] Verified OK [2025-09-24 13:07:41.254] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:07:41.716] Verified OK [2025-09-24 13:07:41.716] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:07:44.242] fs.protected_hardlinks = 1 [2025-09-24 13:07:44.242] fs.protected_symlinks = 1 [2025-09-24 13:07:44.258] kernel.modules_disabled = 1 [2025-09-24 13:07:44.450] [2025-09-24 13:07:44.450] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:07:45.889] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:07:53.594] SBL1:1210.0.1.0 [2025-09-24 13:07:53.626] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:07:55.208] SBL2:1210.0.1.0 [2025-09-24 13:07:55.240] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:07:55.352] j-A [2025-09-24 13:08:02.724] The R5 Autosar Classic is running [2025-09-24 13:08:02.724] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:08:02.724] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:08:03.331] INIT: version 2.96 booting [2025-09-24 13:08:03.442] INIT: Entering runlevel: 5 [2025-09-24 13:08:03.603] mtd32 attached [2025-09-24 13:08:03.603] mtd28 attached [2025-09-24 13:08:03.619] mtd24 attached [2025-09-24 13:08:03.666] RTNETLINK answers: File exists [2025-09-24 13:08:03.740] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:08:03.740] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:08:03.740] ubi0:dml_code is mounted. [2025-09-24 13:08:03.740] ubi2:textures is mounted. [2025-09-24 13:08:03.740] ubi1:animations is mounted. [2025-09-24 13:08:03.740] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:08:03.740] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:08:03.740] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:08:03.740] data.LB_FadeInType0=100 [2025-09-24 13:08:03.740] data.CHLH_FadeInType0=0 [2025-09-24 13:08:03.740] data.WU_FadeInDelay=0 [2025-09-24 13:08:03.740] max_time_out=0 [2025-09-24 13:08:03.740] No splash screen [2025-09-24 13:08:03.740] stop dss Done [2025-09-24 13:08:03.755] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:08:03.771] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:08:03.804] /dev/mem opened. [2025-09-24 13:08:03.804] Memory mapped at address 0xffffa8cd4000. [2025-09-24 13:08:03.804] Read at address 0x00600018 (0xffffa8cd4018): 0x00000000 [2025-09-24 13:08:03.804] Write at address 0x00600018 (0xffffa8cd4018): 0x00400040, readback 0x00400040 [2025-09-24 13:08:03.948] Loaded PowerVR consumer services. [2025-09-24 13:08:04.060] Waiting data available... [2025-09-24 13:08:04.076] 512+0 records in [2025-09-24 13:08:04.076] 512+0 records out [2025-09-24 13:08:04.108] Starting syslogd/klogd: done [2025-09-24 13:08:04.140] DML Start [2025-09-24 13:08:04.300] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:08:04.524] DML res1: 0 [2025-09-24 13:08:04.935] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:08:04.935] Read Success [2025-09-24 13:08:04.935] Verifying certificate... [2025-09-24 13:08:05.158] Verified OK [2025-09-24 13:08:05.174] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:08:06.709] Verified OK [2025-09-24 13:08:06.709] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:08:07.317] Verified OK [2025-09-24 13:08:07.338] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:08:10.055] fs.protected_hardlinks = 1 [2025-09-24 13:08:10.071] fs.protected_symlinks = 1 [2025-09-24 13:08:10.071] kernel.modules_disabled = 1 [2025-09-24 13:08:10.280] [2025-09-24 13:08:10.280] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:08:11.583] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:08:19.282] SBL1:1210.0.1.0 [2025-09-24 13:08:19.330] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:08:20.896] SBL2:1210.0.1.0 [2025-09-24 13:08:20.944] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:08:21.040] j-A [2025-09-24 13:08:28.394] The R5 Autosar Classic is running [2025-09-24 13:08:28.414] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:08:28.414] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:08:29.022] INIT: version 2.96 booting [2025-09-24 13:08:29.134] INIT: Entering runlevel: 5 [2025-09-24 13:08:29.278] mtd24 attached [2025-09-24 13:08:29.310] mtd32 attached [2025-09-24 13:08:29.326] mtd28 attached [2025-09-24 13:08:29.342] ubi0:textures is mounted. [2025-09-24 13:08:29.342] ubi1:dml_code is mounted. [2025-09-24 13:08:29.424] RTNETLINK answers: File exists [2025-09-24 13:08:29.424] ubi2:animations is mounted. [2025-09-24 13:08:29.424] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:08:29.424] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:08:29.424] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:08:29.424] data.LB_FadeInType0=100 [2025-09-24 13:08:29.424] data.CHLH_FadeInType0=0 [2025-09-24 13:08:29.424] data.WU_FadeInDelay=0 [2025-09-24 13:08:29.424] max_time_out=0 [2025-09-24 13:08:29.424] No splash screen [2025-09-24 13:08:29.424] stop dss Done [2025-09-24 13:08:29.424] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:08:29.424] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:08:29.489] /dev/mem opened. [2025-09-24 13:08:29.489] Memory mapped at address 0xffffa3c0b000. [2025-09-24 13:08:29.489] Read at address 0x00600018 (0xffffa3c0b018): 0x00000000 [2025-09-24 13:08:29.489] Write at address 0x00600018 (0xffffa3c0b018): 0x00400040, readback 0x00400040 [2025-09-24 13:08:29.504] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:08:29.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:08:29.697] Loaded PowerVR consumer services. [2025-09-24 13:08:29.760] Waiting data available... [2025-09-24 13:08:29.760] 512+0 records in [2025-09-24 13:08:29.760] 512+0 records out [2025-09-24 13:08:29.808] Starting syslogd/klogd: done [2025-09-24 13:08:29.824] DML Start [2025-09-24 13:08:30.016] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:08:30.256] DML res1: 0 [2025-09-24 13:08:30.640] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:08:30.640] Read Success [2025-09-24 13:08:30.656] Verifying certificate... [2025-09-24 13:08:30.896] Verified OK [2025-09-24 13:08:30.912] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:08:32.630] Verified OK [2025-09-24 13:08:32.630] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:08:33.277] Verified OK [2025-09-24 13:08:33.277] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:08:35.834] fs.protected_hardlinks = 1 [2025-09-24 13:08:35.851] fs.protected_symlinks = 1 [2025-09-24 13:08:35.851] kernel.modules_disabled = 1 [2025-09-24 13:08:36.074] [2025-09-24 13:08:36.075] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:08:37.306] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:08:44.995] SBL1:1210.0.1.0 [2025-09-24 13:08:45.027] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:08:46.610] SBL2:1210.0.1.0 [2025-09-24 13:08:46.642] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:08:46.754] j-A [2025-09-24 13:08:54.129] The R5 Autosar Classic is running [2025-09-24 13:08:54.129] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:08:54.129] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:08:54.736] INIT: version 2.96 booting [2025-09-24 13:08:54.848] INIT: Entering runlevel: 5 [2025-09-24 13:08:55.008] mtd28 attached [2025-09-24 13:08:55.008] mtd32 attached [2025-09-24 13:08:55.024] mtd24 attached [2025-09-24 13:08:55.040] ubi0:animations is mounted. [2025-09-24 13:08:55.072] RTNETLINK answers: File exists [2025-09-24 13:08:55.114] ubi1:dml_code is mounted. [2025-09-24 13:08:55.114] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:08:55.114] ubi2:textures is mounted. [2025-09-24 13:08:55.114] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:08:55.114] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:08:55.114] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:08:55.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:08:55.137] data.LB_FadeInType0=100 [2025-09-24 13:08:55.137] data.CHLH_FadeInType0=0 [2025-09-24 13:08:55.137] data.WU_FadeInDelay=0 [2025-09-24 13:08:55.137] max_time_out=0 [2025-09-24 13:08:55.137] No splash screen [2025-09-24 13:08:55.137] stop dss Done [2025-09-24 13:08:55.224] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:08:55.224] /dev/mem opened. [2025-09-24 13:08:55.224] Memory mapped at address 0xffff910ed000. [2025-09-24 13:08:55.224] Read at address 0x00600018 (0xffff910ed018): 0x00000000 [2025-09-24 13:08:55.224] Write at address 0x00600018 (0xffff910ed018): 0x00400040, readback 0x00400040 [2025-09-24 13:08:55.224] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:08:55.288] Loaded PowerVR consumer services. [2025-09-24 13:08:55.487] Waiting data available... [2025-09-24 13:08:55.487] 512+0 records in [2025-09-24 13:08:55.487] 512+0 records out [2025-09-24 13:08:55.503] Starting syslogd/klogd: done [2025-09-24 13:08:55.519] DML Start [2025-09-24 13:08:55.710] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:08:55.966] DML res1: 0 [2025-09-24 13:08:56.328] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:08:56.328] Read Success [2025-09-24 13:08:56.328] Verifying certificate... [2025-09-24 13:08:56.568] Verified OK [2025-09-24 13:08:56.584] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:08:58.023] Verified OK [2025-09-24 13:08:58.023] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:08:58.657] Verified OK [2025-09-24 13:08:58.657] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:09:01.583] fs.protected_hardlinks = 1 [2025-09-24 13:09:01.583] fs.protected_symlinks = 1 [2025-09-24 13:09:01.598] kernel.modules_disabled = 1 [2025-09-24 13:09:01.791] [2025-09-24 13:09:01.791] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:09:03.027] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:09:10.692] SBL1:1210.0.1.0 [2025-09-24 13:09:10.740] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:09:12.305] SBL2:1210.0.1.0 [2025-09-24 13:09:12.353] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:09:12.466] j-A [2025-09-24 13:09:19.804] The R5 Autosar Classic is running [2025-09-24 13:09:19.835] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:09:19.835] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:09:20.442] INIT: version 2.96 booting [2025-09-24 13:09:20.555] INIT: Entering runlevel: 5 [2025-09-24 13:09:20.698] mtd24 attached [2025-09-24 13:09:20.714] mtd28 attached [2025-09-24 13:09:20.730] mtd32 attached [2025-09-24 13:09:20.839] ubi0:textures is mounted. [2025-09-24 13:09:20.839] ubi1:animations is mounted. [2025-09-24 13:09:20.839] RTNETLINK answers: File exists [2025-09-24 13:09:20.839] ubi2:dml_code is mounted. [2025-09-24 13:09:20.839] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:09:20.839] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:09:20.839] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:09:20.839] data.LB_FadeInType0=100 [2025-09-24 13:09:20.839] data.CHLH_FadeInType0=0 [2025-09-24 13:09:20.839] data.WU_FadeInDelay=0 [2025-09-24 13:09:20.839] max_time_out=0 [2025-09-24 13:09:20.839] No splash screen [2025-09-24 13:09:20.839] stop dss Done [2025-09-24 13:09:20.839] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:09:20.839] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:09:20.870] /dev/mem opened. [2025-09-24 13:09:20.870] Memory mapped at address 0xffffac74d000. [2025-09-24 13:09:20.907] Read at address 0x00600018 (0xffffac74d018): 0x00000000 [2025-09-24 13:09:20.907] Write at address 0x00600018 (0xffffac74d018): 0x00400040, readback 0x00400040 [2025-09-24 13:09:20.907] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:09:20.923] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:09:21.020] Loaded PowerVR consumer services. [2025-09-24 13:09:21.163] Waiting data available... [2025-09-24 13:09:21.179] 512+0 records in [2025-09-24 13:09:21.179] 512+0 records out [2025-09-24 13:09:21.211] Starting syslogd/klogd: done [2025-09-24 13:09:21.227] DML Start [2025-09-24 13:09:21.387] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:09:21.595] DML res1: 0 [2025-09-24 13:09:22.041] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:09:22.041] Read Success [2025-09-24 13:09:22.041] Verifying certificate... [2025-09-24 13:09:22.296] Verified OK [2025-09-24 13:09:22.312] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:09:23.937] Verified OK [2025-09-24 13:09:23.937] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:09:24.550] Verified OK [2025-09-24 13:09:24.550] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:09:27.235] fs.protected_hardlinks = 1 [2025-09-24 13:09:27.235] fs.protected_symlinks = 1 [2025-09-24 13:09:27.251] kernel.modules_disabled = 1 [2025-09-24 13:09:27.443] [2025-09-24 13:09:27.443] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:09:28.690] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:09:36.429] SBL1:1210.0.1.0 [2025-09-24 13:09:36.461] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:09:38.043] SBL2:1210.0.1.0 [2025-09-24 13:09:38.075] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:09:38.187] j-A [2025-09-24 13:09:45.562] The R5 Autosar Classic is running [2025-09-24 13:09:45.562] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:09:45.562] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:09:46.168] INIT: version 2.96 booting [2025-09-24 13:09:46.280] INIT: Entering runlevel: 5 [2025-09-24 13:09:46.424] mtd24 attached [2025-09-24 13:09:46.440] mtd28 attached [2025-09-24 13:09:46.456] mtd32 attached [2025-09-24 13:09:46.488] ubi0:textures is mounted. [2025-09-24 13:09:46.488] RTNETLINK answers: File exists [2025-09-24 13:09:46.538] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:09:46.538] ubi1:animations is mounted. [2025-09-24 13:09:46.538] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:09:46.538] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:09:46.538] ubi2:dml_code is mounted. [2025-09-24 13:09:46.538] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:09:46.538] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:09:46.566] data.LB_FadeInType0=100 [2025-09-24 13:09:46.566] data.CHLH_FadeInType0=0 [2025-09-24 13:09:46.566] data.WU_FadeInDelay=0 [2025-09-24 13:09:46.566] max_time_out=0 [2025-09-24 13:09:46.566] No splash screen [2025-09-24 13:09:46.566] stop dss Done [2025-09-24 13:09:46.598] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:09:46.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:09:46.647] /dev/mem opened. [2025-09-24 13:09:46.647] Memory mapped at address 0xffff9584d000. [2025-09-24 13:09:46.647] Read at address 0x00600018 (0xffff9584d018): 0x00000000 [2025-09-24 13:09:46.647] Write at address 0x00600018 (0xffff9584d018): 0x00400040, readback 0x00400040 [2025-09-24 13:09:46.743] Loaded PowerVR consumer services. [2025-09-24 13:09:46.902] Waiting data available... [2025-09-24 13:09:46.902] 512+0 records in [2025-09-24 13:09:46.902] 512+0 records out [2025-09-24 13:09:46.918] Starting syslogd/klogd: done [2025-09-24 13:09:46.934] DML Start [2025-09-24 13:09:47.142] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:09:47.366] DML res1: 0 [2025-09-24 13:09:47.803] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:09:47.803] Read Success [2025-09-24 13:09:47.803] Verifying certificate... [2025-09-24 13:09:48.043] Verified OK [2025-09-24 13:09:48.059] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:09:49.633] Verified OK [2025-09-24 13:09:49.633] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:09:50.303] Verified OK [2025-09-24 13:09:50.303] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:09:53.084] fs.protected_hardlinks = 1 [2025-09-24 13:09:53.100] fs.protected_symlinks = 1 [2025-09-24 13:09:53.116] kernel.modules_disabled = 1 [2025-09-24 13:09:53.309] [2025-09-24 13:09:53.309] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:09:54.423] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:10:02.145] SBL1:1210.0.1.0 [2025-09-24 13:10:02.177] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:10:03.760] SBL2:1210.0.1.0 [2025-09-24 13:10:03.792] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:10:03.904] j-A [2025-09-24 13:10:11.280] The R5 Autosar Classic is running [2025-09-24 13:10:11.280] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:10:11.280] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:10:11.886] INIT: version 2.96 booting [2025-09-24 13:10:11.998] INIT: Entering runlevel: 5 [2025-09-24 13:10:12.158] mtd24 attached [2025-09-24 13:10:12.158] mtd28 attached [2025-09-24 13:10:12.174] mtd32 attached [2025-09-24 13:10:12.206] ubi0:textures is mounted. [2025-09-24 13:10:12.222] RTNETLINK answers: File exists [2025-09-24 13:10:12.222] ubi1:animations is mounted. [2025-09-24 13:10:12.261] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:10:12.261] ubi2:dml_code is mounted. [2025-09-24 13:10:12.261] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:10:12.261] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:10:12.261] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:10:12.261] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:10:12.261] data.LB_FadeInType0=100 [2025-09-24 13:10:12.261] data.CHLH_FadeInType0=0 [2025-09-24 13:10:12.282] data.WU_FadeInDelay=0 [2025-09-24 13:10:12.282] max_time_out=0 [2025-09-24 13:10:12.282] No splash screen [2025-09-24 13:10:12.282] stop dss Done [2025-09-24 13:10:12.298] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:10:12.314] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:10:12.350] /dev/mem opened. [2025-09-24 13:10:12.350] Memory mapped at address 0xffff83d69000. [2025-09-24 13:10:12.350] Read at address 0x00600018 (0xffff83d69018): 0x00000000 [2025-09-24 13:10:12.350] Write at address 0x00600018 (0xffff83d69018): 0x00400040, readback 0x00400040 [2025-09-24 13:10:12.526] Loaded PowerVR consumer services. [2025-09-24 13:10:12.606] Waiting data available... [2025-09-24 13:10:12.638] 512+0 records in [2025-09-24 13:10:12.638] 512+0 records out [2025-09-24 13:10:12.670] Starting syslogd/klogd: done [2025-09-24 13:10:12.685] DML Start [2025-09-24 13:10:12.862] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:10:13.102] DML res1: 0 [2025-09-24 13:10:13.544] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:10:13.544] Read Success [2025-09-24 13:10:13.544] Verifying certificate... [2025-09-24 13:10:13.800] Verified OK [2025-09-24 13:10:13.832] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:10:15.591] Verified OK [2025-09-24 13:10:15.591] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:10:16.166] Verified OK [2025-09-24 13:10:16.166] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:10:18.611] fs.protected_hardlinks = 1 [2025-09-24 13:10:18.611] fs.protected_symlinks = 1 [2025-09-24 13:10:18.627] kernel.modules_disabled = 1 [2025-09-24 13:10:18.804] [2025-09-24 13:10:18.804] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:10:20.176] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:10:27.872] SBL1:1210.0.1.0 [2025-09-24 13:10:27.920] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:10:29.487] SBL2:1210.0.1.0 [2025-09-24 13:10:29.519] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:10:29.631] j-A [2025-09-24 13:10:36.986] The R5 Autosar Classic is running [2025-09-24 13:10:36.986] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:10:37.007] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:10:37.614] INIT: version 2.96 booting [2025-09-24 13:10:37.726] INIT: Entering runlevel: 5 [2025-09-24 13:10:37.870] mtd24 attached [2025-09-24 13:10:37.886] mtd28 attached [2025-09-24 13:10:37.902] mtd32 attached [2025-09-24 13:10:37.950] RTNETLINK answers: File exists [2025-09-24 13:10:38.017] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:10:38.017] ubi1:animations is mounted. [2025-09-24 13:10:38.017] ubi2:dml_code is mounted. [2025-09-24 13:10:38.017] ubi0:textures is mounted. [2025-09-24 13:10:38.017] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:10:38.017] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:10:38.017] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:10:38.017] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:10:38.017] data.LB_FadeInType0=100 [2025-09-24 13:10:38.017] data.CHLH_FadeInType0=0 [2025-09-24 13:10:38.017] data.WU_FadeInDelay=0 [2025-09-24 13:10:38.017] max_time_out=0 [2025-09-24 13:10:38.017] No splash screen [2025-09-24 13:10:38.017] stop dss Done [2025-09-24 13:10:38.048] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:10:38.088] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:10:38.088] /dev/mem opened. [2025-09-24 13:10:38.088] Memory mapped at address 0xffffacafc000. [2025-09-24 13:10:38.088] Read at address 0x00600018 (0xffffacafc018): 0x00000000 [2025-09-24 13:10:38.088] Write at address 0x00600018 (0xffffacafc018): 0x00400040, readback 0x00400040 [2025-09-24 13:10:38.296] Loaded PowerVR consumer services. [2025-09-24 13:10:38.328] Waiting data available... [2025-09-24 13:10:38.360] 512+0 records in [2025-09-24 13:10:38.360] 512+0 records out [2025-09-24 13:10:38.408] Starting syslogd/klogd: done [2025-09-24 13:10:38.424] DML Start [2025-09-24 13:10:38.584] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:10:38.824] DML res1: 0 [2025-09-24 13:10:39.208] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:10:39.208] Read Success [2025-09-24 13:10:39.223] Verifying certificate... [2025-09-24 13:10:39.447] Verified OK [2025-09-24 13:10:39.447] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:10:41.143] Verified OK [2025-09-24 13:10:41.143] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:10:41.669] Verified OK [2025-09-24 13:10:41.669] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:10:44.291] fs.protected_hardlinks = 1 [2025-09-24 13:10:44.307] fs.protected_symlinks = 1 [2025-09-24 13:10:44.307] kernel.modules_disabled = 1 [2025-09-24 13:10:44.531] [2025-09-24 13:10:44.531] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:10:45.873] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:10:53.655] SBL1:1210.0.1.0 [2025-09-24 13:10:53.703] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:10:55.269] SBL2:1210.0.1.0 [2025-09-24 13:10:55.317] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:10:55.413] j-A [2025-09-24 13:11:02.767] The R5 Autosar Classic is running [2025-09-24 13:11:02.791] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:11:02.791] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:11:03.399] INIT: version 2.96 booting [2025-09-24 13:11:03.511] INIT: Entering runlevel: 5 [2025-09-24 13:11:03.671] mtd24 attached [2025-09-24 13:11:03.671] mtd28 attached [2025-09-24 13:11:03.703] mtd32 attached [2025-09-24 13:11:03.719] ubi0:textures is mounted. [2025-09-24 13:11:03.734] ubi1:animations is mounted. [2025-09-24 13:11:03.751] RTNETLINK answers: File exists [2025-09-24 13:11:03.751] ubi2:dml_code is mounted. [2025-09-24 13:11:03.803] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:11:03.803] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:11:03.803] data.LB_FadeInType0=100 [2025-09-24 13:11:03.803] data.CHLH_FadeInType0=0 [2025-09-24 13:11:03.803] data.WU_FadeInDelay=0 [2025-09-24 13:11:03.803] max_time_out=0 [2025-09-24 13:11:03.803] No splash screen [2025-09-24 13:11:03.803] stop dss Done [2025-09-24 13:11:03.803] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:11:03.803] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:11:03.803] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:11:03.835] /dev/mem opened. [2025-09-24 13:11:03.835] Memory mapped at address 0xffffab9b3000. [2025-09-24 13:11:03.861] Read at address 0x00600018 (0xffffab9b3018): 0x00000000 [2025-09-24 13:11:03.861] Write at address 0x00600018 (0xffffab9b3018): 0x00400040, readback 0x00400040 [2025-09-24 13:11:03.892] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:11:03.908] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:11:03.972] Loaded PowerVR consumer services. [2025-09-24 13:11:04.116] Waiting data available... [2025-09-24 13:11:04.132] 512+0 records in [2025-09-24 13:11:04.148] 512+0 records out [2025-09-24 13:11:04.164] Starting syslogd/klogd: done [2025-09-24 13:11:04.180] DML Start [2025-09-24 13:11:04.388] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:11:04.596] DML res1: 0 [2025-09-24 13:11:05.012] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:11:05.028] Read Success [2025-09-24 13:11:05.028] Verifying certificate... [2025-09-24 13:11:05.268] Verified OK [2025-09-24 13:11:05.284] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:11:06.961] Verified OK [2025-09-24 13:11:06.961] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:11:07.558] Verified OK [2025-09-24 13:11:07.558] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:11:10.307] fs.protected_hardlinks = 1 [2025-09-24 13:11:10.307] fs.protected_symlinks = 1 [2025-09-24 13:11:10.323] kernel.modules_disabled = 1 [2025-09-24 13:11:10.531] [2025-09-24 13:11:10.531] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:11:11.683] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:11:19.448] SBL1:1210.0.1.0 [2025-09-24 13:11:19.496] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:11:21.062] SBL2:1210.0.1.0 [2025-09-24 13:11:21.110] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:11:21.205] j-A [2025-09-24 13:11:28.561] The R5 Autosar Classic is running [2025-09-24 13:11:28.585] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:11:28.585] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:11:29.192] INIT: version 2.96 booting [2025-09-24 13:11:29.304] INIT: Entering runlevel: 5 [2025-09-24 13:11:29.464] mtd24 attached [2025-09-24 13:11:29.464] mtd32 attached [2025-09-24 13:11:29.480] mtd28 attached [2025-09-24 13:11:29.528] ubi0:textures is mounted. [2025-09-24 13:11:29.594] RTNETLINK answers: File exists [2025-09-24 13:11:29.594] ubi1:dml_code is mounted. [2025-09-24 13:11:29.594] ubi2:animations is mounted. [2025-09-24 13:11:29.594] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:11:29.594] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:11:29.594] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:11:29.594] data.LB_FadeInType0=100 [2025-09-24 13:11:29.594] data.CHLH_FadeInType0=0 [2025-09-24 13:11:29.594] data.WU_FadeInDelay=0 [2025-09-24 13:11:29.594] max_time_out=0 [2025-09-24 13:11:29.594] No splash screen [2025-09-24 13:11:29.594] stop dss Done [2025-09-24 13:11:29.594] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:11:29.594] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:11:29.626] /dev/mem opened. [2025-09-24 13:11:29.626] Memory mapped at address 0xffff9dc65000. [2025-09-24 13:11:29.652] Read at address 0x00600018 (0xffff9dc65018): 0x00000000 [2025-09-24 13:11:29.652] Write at address 0x00600018 (0xffff9dc65018): 0x00400040, readback 0x00400040 [2025-09-24 13:11:29.652] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:11:29.668] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:11:29.892] Loaded PowerVR consumer services. [2025-09-24 13:11:29.956] Waiting data available... [2025-09-24 13:11:29.956] 512+0 records in [2025-09-24 13:11:29.972] 512+0 records out [2025-09-24 13:11:30.003] Starting syslogd/klogd: done [2025-09-24 13:11:30.019] DML Start [2025-09-24 13:11:30.195] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:11:30.371] DML res1: 0 [2025-09-24 13:11:30.942] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:11:30.942] Read Success [2025-09-24 13:11:30.942] Verifying certificate... [2025-09-24 13:11:31.181] Verified OK [2025-09-24 13:11:31.197] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:11:32.779] Verified OK [2025-09-24 13:11:32.779] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:11:33.444] Verified OK [2025-09-24 13:11:33.444] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:11:35.987] fs.protected_hardlinks = 1 [2025-09-24 13:11:35.987] fs.protected_symlinks = 1 [2025-09-24 13:11:36.003] kernel.modules_disabled = 1 [2025-09-24 13:11:36.179] [2025-09-24 13:11:36.179] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:11:37.489] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:11:45.292] SBL1:1210.0.1.0 [2025-09-24 13:11:45.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:11:46.906] SBL2:1210.0.1.0 [2025-09-24 13:11:46.938] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:11:47.050] j-A [2025-09-24 13:11:54.405] The R5 Autosar Classic is running [2025-09-24 13:11:54.405] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:11:54.426] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:11:55.033] INIT: version 2.96 booting [2025-09-24 13:11:55.145] INIT: Entering runlevel: 5 [2025-09-24 13:11:55.289] mtd28 attached [2025-09-24 13:11:55.305] mtd24 attached [2025-09-24 13:11:55.321] mtd32 attached [2025-09-24 13:11:55.429] ubi0:animations is mounted. [2025-09-24 13:11:55.429] RTNETLINK answers: File exists [2025-09-24 13:11:55.429] ubi1:textures is mounted. [2025-09-24 13:11:55.429] ubi2:dml_code is mounted. [2025-09-24 13:11:55.429] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:11:55.429] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:11:55.429] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:11:55.429] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:11:55.429] data.LB_FadeInType0=100 [2025-09-24 13:11:55.429] data.CHLH_FadeInType0=0 [2025-09-24 13:11:55.429] data.WU_FadeInDelay=0 [2025-09-24 13:11:55.429] max_time_out=0 [2025-09-24 13:11:55.429] No splash screen [2025-09-24 13:11:55.429] stop dss Done [2025-09-24 13:11:55.429] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:11:55.512] /dev/mem opened. [2025-09-24 13:11:55.512] Memory mapped at address 0xffffae0ae000. [2025-09-24 13:11:55.512] Read at address 0x00600018 (0xffffae0ae018): 0x00000000 [2025-09-24 13:11:55.512] Write at address 0x00600018 (0xffffae0ae018): 0x00400040, readback 0x00400040 [2025-09-24 13:11:55.576] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:11:55.592] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:11:55.672] Loaded PowerVR consumer services. [2025-09-24 13:11:55.784] Waiting data available... [2025-09-24 13:11:55.800] 512+0 records in [2025-09-24 13:11:55.800] 512+0 records out [2025-09-24 13:11:55.816] Starting syslogd/klogd: done [2025-09-24 13:11:55.848] DML Start [2025-09-24 13:11:56.040] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:11:56.215] DML res1: 0 [2025-09-24 13:11:56.691] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:11:56.691] Read Success [2025-09-24 13:11:56.691] Verifying certificate... [2025-09-24 13:11:56.915] Verified OK [2025-09-24 13:11:56.931] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:11:58.625] Verified OK [2025-09-24 13:11:58.625] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:11:59.305] Verified OK [2025-09-24 13:11:59.305] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:12:01.892] fs.protected_hardlinks = 1 [2025-09-24 13:12:01.892] fs.protected_symlinks = 1 [2025-09-24 13:12:01.892] kernel.modules_disabled = 1 [2025-09-24 13:12:02.068] [2025-09-24 13:12:02.068] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:12:03.320] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:12:11.139] SBL1:1210.0.1.0 [2025-09-24 13:12:11.171] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:12:12.753] SBL2:1210.0.1.0 [2025-09-24 13:12:12.785] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:12:12.897] j-A [2025-09-24 13:12:20.272] The R5 Autosar Classic is running [2025-09-24 13:12:20.272] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:12:20.272] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:12:20.879] INIT: version 2.96 booting [2025-09-24 13:12:20.991] INIT: Entering runlevel: 5 [2025-09-24 13:12:21.135] mtd28 attached [2025-09-24 13:12:21.151] mtd24 attached [2025-09-24 13:12:21.151] mtd32 attached [2025-09-24 13:12:21.183] ubi0:animations is mounted. [2025-09-24 13:12:21.251] RTNETLINK answers: File exists [2025-09-24 13:12:21.251] ubi1:textures is mounted. [2025-09-24 13:12:21.251] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:12:21.251] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:12:21.251] ubi2:dml_code is mounted. [2025-09-24 13:12:21.251] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:12:21.251] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:12:21.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:12:21.251] data.LB_FadeInType0=100 [2025-09-24 13:12:21.272] data.CHLH_FadeInType0=0 [2025-09-24 13:12:21.272] data.WU_FadeInDelay=0 [2025-09-24 13:12:21.272] max_time_out=0 [2025-09-24 13:12:21.272] No splash screen [2025-09-24 13:12:21.272] stop dss Done [2025-09-24 13:12:21.366] /dev/mem opened. [2025-09-24 13:12:21.366] Memory mapped at address 0xffff8655b000. [2025-09-24 13:12:21.366] Read at address 0x00600018 (0xffff8655b018): 0x00000000 [2025-09-24 13:12:21.366] Write at address 0x00600018 (0xffff8655b018): 0x00400040, readback 0x00400040 [2025-09-24 13:12:21.366] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:12:21.366] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:12:21.542] Loaded PowerVR consumer services. [2025-09-24 13:12:21.590] Waiting data available... [2025-09-24 13:12:21.622] 512+0 records in [2025-09-24 13:12:21.622] 512+0 records out [2025-09-24 13:12:21.654] Starting syslogd/klogd: done [2025-09-24 13:12:21.669] DML Start [2025-09-24 13:12:21.861] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:12:22.085] DML res1: 0 [2025-09-24 13:12:22.574] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:12:22.574] Read Success [2025-09-24 13:12:22.574] Verifying certificate... [2025-09-24 13:12:22.829] Verified OK [2025-09-24 13:12:22.845] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:12:24.530] Verified OK [2025-09-24 13:12:24.530] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:12:25.105] Verified OK [2025-09-24 13:12:25.105] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:12:27.694] fs.protected_hardlinks = 1 [2025-09-24 13:12:27.710] fs.protected_symlinks = 1 [2025-09-24 13:12:27.710] kernel.modules_disabled = 1 [2025-09-24 13:12:27.918] [2025-09-24 13:12:27.918] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:12:29.156] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:12:37.029] SBL1:1210.0.1.0 [2025-09-24 13:12:37.077] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:12:38.643] SBL2:1210.0.1.0 [2025-09-24 13:12:38.675] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:12:38.787] j-A [2025-09-24 13:12:46.141] The R5 Autosar Classic is running [2025-09-24 13:12:46.141] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:12:46.163] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:12:46.770] INIT: version 2.96 booting [2025-09-24 13:12:46.882] INIT: Entering runlevel: 5 [2025-09-24 13:12:47.025] mtd28 attached [2025-09-24 13:12:47.041] mtd32 attached [2025-09-24 13:12:47.057] mtd24 attached [2025-09-24 13:12:47.105] ubi0:animations is mounted. [2025-09-24 13:12:47.105] RTNETLINK answers: File exists [2025-09-24 13:12:47.160] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:12:47.160] ubi2:textures is mounted. [2025-09-24 13:12:47.160] ubi1:dml_code is mounted. [2025-09-24 13:12:47.160] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:12:47.160] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:12:47.160] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:12:47.160] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:12:47.160] data.LB_FadeInType0=100 [2025-09-24 13:12:47.160] data.CHLH_FadeInType0=0 [2025-09-24 13:12:47.160] data.WU_FadeInDelay=0 [2025-09-24 13:12:47.160] max_time_out=0 [2025-09-24 13:12:47.160] No splash screen [2025-09-24 13:12:47.160] stop dss Done [2025-09-24 13:12:47.208] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:12:47.244] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:12:47.244] /dev/mem opened. [2025-09-24 13:12:47.244] Memory mapped at address 0xffffa6c45000. [2025-09-24 13:12:47.244] Read at address 0x00600018 (0xffffa6c45018): 0x00000000 [2025-09-24 13:12:47.244] Write at address 0x00600018 (0xffffa6c45018): 0x00400040, readback 0x00400040 [2025-09-24 13:12:47.323] Loaded PowerVR consumer services. [2025-09-24 13:12:47.500] Waiting data available... [2025-09-24 13:12:47.516] 512+0 records in [2025-09-24 13:12:47.516] 512+0 records out [2025-09-24 13:12:47.563] Starting syslogd/klogd: done [2025-09-24 13:12:47.579] DML Start [2025-09-24 13:12:47.755] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:12:47.995] DML res1: 0 [2025-09-24 13:12:48.363] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:12:48.379] Read Success [2025-09-24 13:12:48.379] Verifying certificate... [2025-09-24 13:12:48.603] Verified OK [2025-09-24 13:12:48.619] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:12:50.211] Verified OK [2025-09-24 13:12:50.211] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:12:50.849] Verified OK [2025-09-24 13:12:50.849] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:12:53.533] fs.protected_hardlinks = 1 [2025-09-24 13:12:53.533] fs.protected_symlinks = 1 [2025-09-24 13:12:53.533] kernel.modules_disabled = 1 [2025-09-24 13:12:53.709] [2025-09-24 13:12:53.709] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:12:55.084] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:13:02.873] SBL1:1210.0.1.0 [2025-09-24 13:13:02.921] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:13:04.487] SBL2:1210.0.1.0 [2025-09-24 13:13:04.535] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 13:13:04.648] j-A [2025-09-24 13:13:12.018] The R5 Autosar Classic is running [2025-09-24 13:13:12.018] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:13:12.018] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:13:12.625] INIT: version 2.96 booting [2025-09-24 13:13:12.721] INIT: Entering runlevel: 5 [2025-09-24 13:13:12.880] mtd28 attached [2025-09-24 13:13:12.897] mtd24 attached [2025-09-24 13:13:12.913] mtd32 attached [2025-09-24 13:13:12.945] ubi1:textures is mounted. [2025-09-24 13:13:12.961] ubi0:animations is mounted. [2025-09-24 13:13:12.961] RTNETLINK answers: File exists [2025-09-24 13:13:13.015] ubi2:dml_code is mounted. [2025-09-24 13:13:13.015] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:13:13.015] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:13:13.015] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:13:13.015] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:13:13.015] data.LB_FadeInType0=100 [2025-09-24 13:13:13.015] data.CHLH_FadeInType0=0 [2025-09-24 13:13:13.015] data.WU_FadeInDelay=0 [2025-09-24 13:13:13.015] max_time_out=0 [2025-09-24 13:13:13.015] No splash screen [2025-09-24 13:13:13.015] stop dss Done [2025-09-24 13:13:13.015] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:13:13.062] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:13:13.098] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:13:13.098] /dev/mem opened. [2025-09-24 13:13:13.098] Memory mapped at address 0xffffb7741000. [2025-09-24 13:13:13.098] Read at address 0x00600018 (0xffffb7741018): 0x00000000 [2025-09-24 13:13:13.098] Write at address 0x00600018 (0xffffb7741018): 0x00400040, readback 0x00400040 [2025-09-24 13:13:13.306] Loaded PowerVR consumer services. [2025-09-24 13:13:13.354] Waiting data available... [2025-09-24 13:13:13.370] 512+0 records in [2025-09-24 13:13:13.370] 512+0 records out [2025-09-24 13:13:13.418] Starting syslogd/klogd: done [2025-09-24 13:13:13.434] DML Start [2025-09-24 13:13:13.626] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:13:13.850] DML res1: 0 [2025-09-24 13:13:14.215] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:13:14.215] Read Success [2025-09-24 13:13:14.215] Verifying certificate... [2025-09-24 13:13:14.423] Verified OK [2025-09-24 13:13:14.439] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:13:16.014] Verified OK [2025-09-24 13:13:16.014] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:13:16.637] Verified OK [2025-09-24 13:13:16.637] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:13:19.372] fs.protected_hardlinks = 1 [2025-09-24 13:13:19.372] fs.protected_symlinks = 1 [2025-09-24 13:13:19.388] kernel.modules_disabled = 1 [2025-09-24 13:13:19.563] [2025-09-24 13:13:19.563] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:13:20.888] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:13:28.708] SBL1:1210.0.1.0 [2025-09-24 13:13:28.740] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:13:30.323] SBL2:1210.0.1.0 [2025-09-24 13:13:30.355] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:13:30.466] j-A [2025-09-24 13:13:37.839] The R5 Autosar Classic is running [2025-09-24 13:13:37.839] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:13:37.839] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:13:38.446] INIT: version 2.96 booting [2025-09-24 13:13:38.558] INIT: Entering runlevel: 5 [2025-09-24 13:13:38.702] mtd32 attached [2025-09-24 13:13:38.718] mtd24 attached [2025-09-24 13:13:38.734] mtd28 attached [2025-09-24 13:13:38.766] RTNETLINK answers: File exists [2025-09-24 13:13:38.837] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:13:38.837] ubi2:animations is mounted. [2025-09-24 13:13:38.837] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:13:38.837] ubi0:dml_code is mounted. [2025-09-24 13:13:38.837] ubi1:textures is mounted. [2025-09-24 13:13:38.837] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:13:38.837] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:13:38.837] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:13:38.837] data.LB_FadeInType0=100 [2025-09-24 13:13:38.837] data.CHLH_FadeInType0=0 [2025-09-24 13:13:38.837] data.WU_FadeInDelay=0 [2025-09-24 13:13:38.837] max_time_out=0 [2025-09-24 13:13:38.837] No splash screen [2025-09-24 13:13:38.837] stop dss Done [2025-09-24 13:13:38.909] /dev/mem opened. [2025-09-24 13:13:38.909] Memory mapped at address 0xffff9661e000. [2025-09-24 13:13:38.909] Read at address 0x00600018 (0xffff9661e018): 0x00000000 [2025-09-24 13:13:38.909] Write at address 0x00600018 (0xffff9661e018): 0x00400040, readback 0x00400040 [2025-09-24 13:13:38.926] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:13:38.942] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:13:39.166] Waiting data available... [2025-09-24 13:13:39.166] Loaded PowerVR consumer services. [2025-09-24 13:13:39.197] 512+0 records in [2025-09-24 13:13:39.197] 512+0 records out [2025-09-24 13:13:39.213] Starting syslogd/klogd: done [2025-09-24 13:13:39.245] DML Start [2025-09-24 13:13:39.421] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:13:39.613] DML res1: 0 [2025-09-24 13:13:40.042] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:13:40.042] Read Success [2025-09-24 13:13:40.042] Verifying certificate... [2025-09-24 13:13:40.330] Verified OK [2025-09-24 13:13:40.346] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:13:42.003] Verified OK [2025-09-24 13:13:42.003] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:13:42.591] Verified OK [2025-09-24 13:13:42.591] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:13:45.306] fs.protected_hardlinks = 1 [2025-09-24 13:13:45.306] fs.protected_symlinks = 1 [2025-09-24 13:13:45.306] kernel.modules_disabled = 1 [2025-09-24 13:13:45.497] [2025-09-24 13:13:45.497] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:13:46.697] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:13:54.506] SBL1:1210.0.1.0 [2025-09-24 13:13:54.555] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:13:56.122] SBL2:1210.0.1.0 [2025-09-24 13:13:56.170] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:13:56.281] j-A [2025-09-24 13:14:03.619] The R5 Autosar Classic is running [2025-09-24 13:14:03.650] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:14:03.650] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:14:04.257] INIT: version 2.96 booting [2025-09-24 13:14:04.353] INIT: Entering runlevel: 5 [2025-09-24 13:14:04.513] mtd24 attached [2025-09-24 13:14:04.513] mtd28 attached [2025-09-24 13:14:04.529] mtd32 attached [2025-09-24 13:14:04.577] RTNETLINK answers: File exists [2025-09-24 13:14:04.627] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:14:04.627] ubi1:animations is mounted. [2025-09-24 13:14:04.627] ubi0:textures is mounted. [2025-09-24 13:14:04.627] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:14:04.627] ubi2:dml_code is mounted. [2025-09-24 13:14:04.627] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:14:04.627] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:14:04.627] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:14:04.648] data.LB_FadeInType0=100 [2025-09-24 13:14:04.648] data.CHLH_FadeInType0=0 [2025-09-24 13:14:04.648] data.WU_FadeInDelay=0 [2025-09-24 13:14:04.648] max_time_out=0 [2025-09-24 13:14:04.648] No splash screen [2025-09-24 13:14:04.648] stop dss Done [2025-09-24 13:14:04.680] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:14:04.696] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:14:04.728] /dev/mem opened. [2025-09-24 13:14:04.728] Memory mapped at address 0xffffaca92000. [2025-09-24 13:14:04.728] Read at address 0x00600018 (0xffffaca92018): 0x00000000 [2025-09-24 13:14:04.728] Write at address 0x00600018 (0xffffaca92018): 0x00400040, readback 0x00400040 [2025-09-24 13:14:04.951] Loaded PowerVR consumer services. [2025-09-24 13:14:05.032] Waiting data available... [2025-09-24 13:14:05.048] 512+0 records in [2025-09-24 13:14:05.048] 512+0 records out [2025-09-24 13:14:05.096] Starting syslogd/klogd: done [2025-09-24 13:14:05.096] DML Start [2025-09-24 13:14:05.287] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:14:05.479] DML res1: 0 [2025-09-24 13:14:05.933] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:14:05.933] Read Success [2025-09-24 13:14:05.933] Verifying certificate... [2025-09-24 13:14:06.173] Verified OK [2025-09-24 13:14:06.189] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:14:07.899] Verified OK [2025-09-24 13:14:07.899] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:14:08.450] Verified OK [2025-09-24 13:14:08.450] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:14:10.864] fs.protected_hardlinks = 1 [2025-09-24 13:14:10.894] fs.protected_symlinks = 1 [2025-09-24 13:14:10.894] kernel.modules_disabled = 1 [2025-09-24 13:14:11.070] [2025-09-24 13:14:11.070] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:14:12.540] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:14:20.306] SBL1:1210.0.1.0 [2025-09-24 13:14:20.354] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:14:21.921] SBL2:1210.0.1.0 [2025-09-24 13:14:21.969] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:14:22.081] j-A [2025-09-24 13:14:29.419] The R5 Autosar Classic is running [2025-09-24 13:14:29.450] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:14:29.450] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:14:30.057] INIT: version 2.96 booting [2025-09-24 13:14:30.168] INIT: Entering runlevel: 5 [2025-09-24 13:14:30.313] mtd24 attached [2025-09-24 13:14:30.329] mtd28 attached [2025-09-24 13:14:30.345] mtd32 attached [2025-09-24 13:14:30.449] ubi0:textures is mounted. [2025-09-24 13:14:30.449] ubi1:animations is mounted. [2025-09-24 13:14:30.449] RTNETLINK answers: File exists [2025-09-24 13:14:30.449] ubi2:dml_code is mounted. [2025-09-24 13:14:30.449] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:14:30.449] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:14:30.449] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:14:30.449] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:14:30.449] data.LB_FadeInType0=100 [2025-09-24 13:14:30.449] data.CHLH_FadeInType0=0 [2025-09-24 13:14:30.449] data.WU_FadeInDelay=0 [2025-09-24 13:14:30.449] max_time_out=0 [2025-09-24 13:14:30.449] No splash screen [2025-09-24 13:14:30.449] stop dss Done [2025-09-24 13:14:30.449] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:14:30.518] /dev/mem opened. [2025-09-24 13:14:30.518] Memory mapped at address 0xffffa5698000. [2025-09-24 13:14:30.518] Read at address 0x00600018 (0xffffa5698018): 0x00000000 [2025-09-24 13:14:30.518] Write at address 0x00600018 (0xffffa5698018): 0x00400040, readback 0x00400040 [2025-09-24 13:14:30.580] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:14:30.580] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:14:30.709] Loaded PowerVR consumer services. [2025-09-24 13:14:30.805] Waiting data available... [2025-09-24 13:14:30.820] 512+0 records in [2025-09-24 13:14:30.820] 512+0 records out [2025-09-24 13:14:30.884] Starting syslogd/klogd: done [2025-09-24 13:14:30.884] DML Start [2025-09-24 13:14:31.076] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:14:31.332] DML res1: 0 [2025-09-24 13:14:31.699] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:14:31.720] Read Success [2025-09-24 13:14:31.720] Verifying certificate... [2025-09-24 13:14:31.976] Verified OK [2025-09-24 13:14:31.992] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:14:33.648] Verified OK [2025-09-24 13:14:33.648] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:14:34.175] Verified OK [2025-09-24 13:14:34.175] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:14:36.861] fs.protected_hardlinks = 1 [2025-09-24 13:14:36.861] fs.protected_symlinks = 1 [2025-09-24 13:14:36.877] kernel.modules_disabled = 1 [2025-09-24 13:14:37.068] [2025-09-24 13:14:37.068] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:14:38.400] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:14:40.658] SBL1:1210.0.1.0 [2025-09-24 13:14:46.157] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:14:47.723] SBL2:1210.0.1.0 [2025-09-24 13:14:47.771] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:14:47.882] j-A [2025-09-24 13:14:55.221] The R5 Autosar Classic is running [2025-09-24 13:14:55.252] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:14:55.252] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:14:55.860] INIT: version 2.96 booting [2025-09-24 13:14:55.955] INIT: Entering runlevel: 5 [2025-09-24 13:14:56.116] mtd28 attached [2025-09-24 13:14:56.116] mtd24 attached [2025-09-24 13:14:56.131] mtd32 attached [2025-09-24 13:14:56.163] ubi0:animations is mounted. [2025-09-24 13:14:56.250] RTNETLINK answers: File exists [2025-09-24 13:14:56.250] ubi1:textures is mounted. [2025-09-24 13:14:56.250] ubi2:dml_code is mounted. [2025-09-24 13:14:56.250] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:14:56.250] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:14:56.250] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:14:56.250] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:14:56.250] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:14:56.250] data.LB_FadeInType0=100 [2025-09-24 13:14:56.250] data.CHLH_FadeInType0=0 [2025-09-24 13:14:56.250] data.WU_FadeInDelay=0 [2025-09-24 13:14:56.250] max_time_out=0 [2025-09-24 13:14:56.250] No splash screen [2025-09-24 13:14:56.250] stop dss Done [2025-09-24 13:14:56.319] /dev/mem opened. [2025-09-24 13:14:56.319] Memory mapped at address 0xffff901c7000. [2025-09-24 13:14:56.319] Read at address 0x00600018 (0xffff901c7018): 0x00000000 [2025-09-24 13:14:56.319] Write at address 0x00600018 (0xffff901c7018): 0x00400040, readback 0x00400040 [2025-09-24 13:14:56.319] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:14:56.335] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:14:56.527] Loaded PowerVR consumer services. [2025-09-24 13:14:56.620] Waiting data available... [2025-09-24 13:14:56.620] 512+0 records in [2025-09-24 13:14:56.620] 512+0 records out [2025-09-24 13:14:56.652] Starting syslogd/klogd: done [2025-09-24 13:14:56.668] DML Start [2025-09-24 13:14:56.812] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:14:57.051] DML res1: 0 [2025-09-24 13:14:57.515] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:14:57.531] Read Success [2025-09-24 13:14:57.531] Verifying certificate... [2025-09-24 13:14:57.787] Verified OK [2025-09-24 13:14:57.803] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:14:59.520] Verified OK [2025-09-24 13:14:59.520] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:15:00.112] Verified OK [2025-09-24 13:15:00.112] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:15:02.669] fs.protected_hardlinks = 1 [2025-09-24 13:15:02.669] fs.protected_symlinks = 1 [2025-09-24 13:15:02.685] kernel.modules_disabled = 1 [2025-09-24 13:15:02.877] [2025-09-24 13:15:02.877] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:15:04.177] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:15:11.909] SBL1:1210.0.1.0 [2025-09-24 13:15:11.941] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:15:13.523] SBL2:1210.0.1.0 [2025-09-24 13:15:13.555] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:15:13.668] j-A [2025-09-24 13:15:21.040] The R5 Autosar Classic is running [2025-09-24 13:15:21.040] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:15:21.040] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:15:21.646] INIT: version 2.96 booting [2025-09-24 13:15:21.758] INIT: Entering runlevel: 5 [2025-09-24 13:15:21.902] mtd24 attached [2025-09-24 13:15:21.918] mtd28 attached [2025-09-24 13:15:21.950] mtd32 attached [2025-09-24 13:15:21.950] ubi0:textures is mounted. [2025-09-24 13:15:21.982] RTNETLINK answers: File exists [2025-09-24 13:15:22.042] ubi1:animations is mounted. [2025-09-24 13:15:22.043] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:15:22.043] ubi2:dml_code is mounted. [2025-09-24 13:15:22.043] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:15:22.043] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:15:22.043] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:15:22.043] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:15:22.043] data.LB_FadeInType0=100 [2025-09-24 13:15:22.043] data.CHLH_FadeInType0=0 [2025-09-24 13:15:22.043] data.WU_FadeInDelay=0 [2025-09-24 13:15:22.043] max_time_out=0 [2025-09-24 13:15:22.043] No splash screen [2025-09-24 13:15:22.043] stop dss Done [2025-09-24 13:15:22.090] /dev/mem opened. [2025-09-24 13:15:22.090] Memory mapped at address 0xffffba49d000. [2025-09-24 13:15:22.128] Read at address 0x00600018 (0xffffba49d018): 0x00000000 [2025-09-24 13:15:22.128] Write at address 0x00600018 (0xffffba49d018): 0x00400040, readback 0x00400040 [2025-09-24 13:15:22.128] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:15:22.128] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:15:22.335] Loaded PowerVR consumer services. [2025-09-24 13:15:22.415] Waiting data available... [2025-09-24 13:15:22.430] 512+0 records in [2025-09-24 13:15:22.430] 512+0 records out [2025-09-24 13:15:22.479] Starting syslogd/klogd: done [2025-09-24 13:15:22.495] DML Start [2025-09-24 13:15:22.687] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:15:22.910] DML res1: 0 [2025-09-24 13:15:23.294] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:15:23.310] Read Success [2025-09-24 13:15:23.310] Verifying certificate... [2025-09-24 13:15:23.550] Verified OK [2025-09-24 13:15:23.566] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:15:25.229] Verified OK [2025-09-24 13:15:25.245] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:15:25.788] Verified OK [2025-09-24 13:15:25.788] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:15:28.490] fs.protected_hardlinks = 1 [2025-09-24 13:15:28.506] fs.protected_symlinks = 1 [2025-09-24 13:15:28.522] kernel.modules_disabled = 1 [2025-09-24 13:15:28.730] [2025-09-24 13:15:28.730] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:15:29.955] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:15:37.693] SBL1:1210.0.1.0 [2025-09-24 13:15:37.725] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:15:39.307] SBL2:1210.0.1.0 [2025-09-24 13:15:39.339] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:15:39.451] j-A [2025-09-24 13:15:46.807] The R5 Autosar Classic is running [2025-09-24 13:15:46.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:15:46.827] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:15:47.435] INIT: version 2.96 booting [2025-09-24 13:15:47.547] INIT: Entering runlevel: 5 [2025-09-24 13:15:47.691] mtd24 attached [2025-09-24 13:15:47.706] mtd28 attached [2025-09-24 13:15:47.738] ubi0:textures is mounted. [2025-09-24 13:15:47.738] mtd32 attached [2025-09-24 13:15:47.754] ubi1:animations is mounted. [2025-09-24 13:15:47.770] RTNETLINK answers: File exists [2025-09-24 13:15:47.808] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:15:47.808] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:15:47.808] ubi2:dml_code is mounted. [2025-09-24 13:15:47.808] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:15:47.808] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:15:47.808] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:15:47.831] data.LB_FadeInType0=100 [2025-09-24 13:15:47.831] data.CHLH_FadeInType0=0 [2025-09-24 13:15:47.831] data.WU_FadeInDelay=0 [2025-09-24 13:15:47.831] max_time_out=0 [2025-09-24 13:15:47.831] No splash screen [2025-09-24 13:15:47.831] stop dss Done [2025-09-24 13:15:47.864] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:15:47.880] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:15:47.915] /dev/mem opened. [2025-09-24 13:15:47.915] Memory mapped at address 0xffffa06a9000. [2025-09-24 13:15:47.915] Read at address 0x00600018 (0xffffa06a9018): 0x00000000 [2025-09-24 13:15:47.915] Write at address 0x00600018 (0xffffa06a9018): 0x00400040, readback 0x00400040 [2025-09-24 13:15:47.979] Loaded PowerVR consumer services. [2025-09-24 13:15:48.168] Waiting data available... [2025-09-24 13:15:48.168] 512+0 records in [2025-09-24 13:15:48.168] 512+0 records out [2025-09-24 13:15:48.200] Starting syslogd/klogd: done [2025-09-24 13:15:48.216] DML Start [2025-09-24 13:15:48.408] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:15:48.616] DML res1: 0 [2025-09-24 13:15:49.091] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:15:49.091] Read Success [2025-09-24 13:15:49.091] Verifying certificate... [2025-09-24 13:15:49.346] Verified OK [2025-09-24 13:15:49.362] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:15:51.015] Verified OK [2025-09-24 13:15:51.015] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:15:51.619] Verified OK [2025-09-24 13:15:51.619] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:15:54.256] fs.protected_hardlinks = 1 [2025-09-24 13:15:54.272] fs.protected_symlinks = 1 [2025-09-24 13:15:54.272] kernel.modules_disabled = 1 [2025-09-24 13:15:54.463] [2025-09-24 13:15:54.463] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:15:55.675] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:16:03.476] SBL1:1210.0.1.0 [2025-09-24 13:16:03.508] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:16:05.092] SBL2:1210.0.1.0 [2025-09-24 13:16:05.124] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:16:05.235] j-A [2025-09-24 13:16:12.609] The R5 Autosar Classic is running [2025-09-24 13:16:12.609] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:16:12.609] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:16:13.216] INIT: version 2.96 booting [2025-09-24 13:16:13.328] INIT: Entering runlevel: 5 [2025-09-24 13:16:13.472] mtd24 attached [2025-09-24 13:16:13.488] mtd28 attached [2025-09-24 13:16:13.504] ubi0:textures is mounted. [2025-09-24 13:16:13.520] mtd32 attached [2025-09-24 13:16:13.574] ubi1:animations is mounted. [2025-09-24 13:16:13.574] RTNETLINK answers: File exists [2025-09-24 13:16:13.574] ubi2:dml_code is mounted. [2025-09-24 13:16:13.574] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:16:13.574] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:16:13.608] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:16:13.608] data.LB_FadeInType0=100 [2025-09-24 13:16:13.608] data.CHLH_FadeInType0=0 [2025-09-24 13:16:13.608] data.WU_FadeInDelay=0 [2025-09-24 13:16:13.608] max_time_out=0 [2025-09-24 13:16:13.608] No splash screen [2025-09-24 13:16:13.608] stop dss Done [2025-09-24 13:16:13.608] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:16:13.608] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:16:13.695] /dev/mem opened. [2025-09-24 13:16:13.695] Memory mapped at address 0xffff98f12000. [2025-09-24 13:16:13.695] Read at address 0x00600018 (0xffff98f12018): 0x00000000 [2025-09-24 13:16:13.695] Write at address 0x00600018 (0xffff98f12018): 0x00400040, readback 0x00400040 [2025-09-24 13:16:13.695] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:16:13.695] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:16:13.822] Loaded PowerVR consumer services. [2025-09-24 13:16:13.935] Waiting data available... [2025-09-24 13:16:13.951] 512+0 records in [2025-09-24 13:16:13.951] 512+0 records out [2025-09-24 13:16:13.999] Starting syslogd/klogd: done [2025-09-24 13:16:14.015] DML Start [2025-09-24 13:16:14.175] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:16:14.399] DML res1: 0 [2025-09-24 13:16:14.878] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:16:14.894] Read Success [2025-09-24 13:16:14.894] Verifying certificate... [2025-09-24 13:16:15.150] Verified OK [2025-09-24 13:16:15.182] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:16:16.804] Verified OK [2025-09-24 13:16:16.804] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:16:17.405] Verified OK [2025-09-24 13:16:17.405] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:16:19.947] fs.protected_hardlinks = 1 [2025-09-24 13:16:19.947] fs.protected_symlinks = 1 [2025-09-24 13:16:19.962] kernel.modules_disabled = 1 [2025-09-24 13:16:20.155] [2025-09-24 13:16:20.155] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:16:21.441] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:16:29.244] SBL1:1210.0.1.0 [2025-09-24 13:16:29.292] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:16:30.858] SBL2:1210.0.1.0 [2025-09-24 13:16:30.906] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:16:31.003] j-A [2025-09-24 13:16:38.358] The R5 Autosar Classic is running [2025-09-24 13:16:38.382] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:16:38.382] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:16:38.988] INIT: version 2.96 booting [2025-09-24 13:16:39.101] INIT: Entering runlevel: 5 [2025-09-24 13:16:39.260] mtd32 attached [2025-09-24 13:16:39.276] mtd28 attached [2025-09-24 13:16:39.276] mtd24 attached [2025-09-24 13:16:39.324] RTNETLINK answers: File exists [2025-09-24 13:16:39.324] ubi0:dml_code is mounted. [2025-09-24 13:16:39.386] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:16:39.386] ubi1:animations is mounted. [2025-09-24 13:16:39.386] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:16:39.386] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:16:39.386] ubi2:textures is mounted. [2025-09-24 13:16:39.386] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:16:39.386] data.LB_FadeInType0=100 [2025-09-24 13:16:39.386] data.CHLH_FadeInType0=0 [2025-09-24 13:16:39.386] data.WU_FadeInDelay=0 [2025-09-24 13:16:39.386] max_time_out=0 [2025-09-24 13:16:39.386] No splash screen [2025-09-24 13:16:39.386] stop dss Done [2025-09-24 13:16:39.386] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:16:39.432] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:16:39.432] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:16:39.432] /dev/mem opened. [2025-09-24 13:16:39.432] Memory mapped at address 0xffffb85f9000. [2025-09-24 13:16:39.458] Read at address 0x00600018 (0xffffb85f9018): 0x00000000 [2025-09-24 13:16:39.458] Write at address 0x00600018 (0xffffb85f9018): 0x00400040, readback 0x00400040 [2025-09-24 13:16:39.553] Loaded PowerVR consumer services. [2025-09-24 13:16:39.744] Waiting data available... [2025-09-24 13:16:39.744] 512+0 records in [2025-09-24 13:16:39.744] 512+0 records out [2025-09-24 13:16:39.760] Starting syslogd/klogd: done [2025-09-24 13:16:39.776] DML Start [2025-09-24 13:16:39.936] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:16:40.224] DML res1: 0 [2025-09-24 13:16:40.560] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:16:40.581] Read Success [2025-09-24 13:16:40.581] Verifying certificate... [2025-09-24 13:16:40.836] Verified OK [2025-09-24 13:16:40.852] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:16:42.481] Verified OK [2025-09-24 13:16:42.481] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:16:43.165] Verified OK [2025-09-24 13:16:43.165] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:16:45.819] fs.protected_hardlinks = 1 [2025-09-24 13:16:45.835] fs.protected_symlinks = 1 [2025-09-24 13:16:45.835] kernel.modules_disabled = 1 [2025-09-24 13:16:46.026] [2025-09-24 13:16:46.026] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:16:47.279] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:16:55.041] SBL1:1210.0.1.0 [2025-09-24 13:16:55.089] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:16:56.655] SBL2:1210.0.1.0 [2025-09-24 13:16:56.703] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:16:56.799] j-A [2025-09-24 13:17:04.153] The R5 Autosar Classic is running [2025-09-24 13:17:04.153] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:17:04.175] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:17:04.782] INIT: version 2.96 booting [2025-09-24 13:17:04.894] INIT: Entering runlevel: 5 [2025-09-24 13:17:05.054] mtd28 attached [2025-09-24 13:17:05.054] mtd32 attached [2025-09-24 13:17:05.069] mtd24 attached [2025-09-24 13:17:05.117] ubi0:animations is mounted. [2025-09-24 13:17:05.117] RTNETLINK answers: File exists [2025-09-24 13:17:05.156] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:17:05.156] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:17:05.156] ubi1:dml_code is mounted. [2025-09-24 13:17:05.156] ubi2:textures is mounted. [2025-09-24 13:17:05.156] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:17:05.156] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:17:05.156] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:17:05.178] data.LB_FadeInType0=100 [2025-09-24 13:17:05.178] data.CHLH_FadeInType0=0 [2025-09-24 13:17:05.178] data.WU_FadeInDelay=0 [2025-09-24 13:17:05.178] max_time_out=0 [2025-09-24 13:17:05.178] No splash screen [2025-09-24 13:17:05.178] stop dss Done [2025-09-24 13:17:05.194] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:17:05.210] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:17:05.226] /dev/mem opened. [2025-09-24 13:17:05.226] Memory mapped at address 0xffff83af0000. [2025-09-24 13:17:05.252] Read at address 0x00600018 (0xffff83af0018): 0x00000000 [2025-09-24 13:17:05.252] Write at address 0x00600018 (0xffff83af0018): 0x00400040, readback 0x00400040 [2025-09-24 13:17:05.395] Loaded PowerVR consumer services. [2025-09-24 13:17:05.524] Waiting data available... [2025-09-24 13:17:05.540] 512+0 records in [2025-09-24 13:17:05.540] 512+0 records out [2025-09-24 13:17:05.556] Starting syslogd/klogd: done [2025-09-24 13:17:05.572] DML Start [2025-09-24 13:17:05.747] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:17:05.972] DML res1: 0 [2025-09-24 13:17:06.449] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:17:06.449] Read Success [2025-09-24 13:17:06.449] Verifying certificate... [2025-09-24 13:17:06.689] Verified OK [2025-09-24 13:17:06.705] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:17:08.315] Verified OK [2025-09-24 13:17:08.315] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:17:08.969] Verified OK [2025-09-24 13:17:08.969] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:17:11.703] fs.protected_hardlinks = 1 [2025-09-24 13:17:11.703] fs.protected_symlinks = 1 [2025-09-24 13:17:11.719] kernel.modules_disabled = 1 [2025-09-24 13:17:11.912] [2025-09-24 13:17:11.912] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:17:13.058] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:17:20.797] SBL1:1210.0.1.0 [2025-09-24 13:17:20.846] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:17:22.412] SBL2:1210.0.1.0 [2025-09-24 13:17:22.460] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:17:22.572] j-A [2025-09-24 13:17:29.911] The R5 Autosar Classic is running [2025-09-24 13:17:29.936] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:17:29.936] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:17:30.543] INIT: version 2.96 booting [2025-09-24 13:17:30.655] INIT: Entering runlevel: 5 [2025-09-24 13:17:30.815] mtd24 attached [2025-09-24 13:17:30.815] mtd28 attached [2025-09-24 13:17:30.831] mtd32 attached [2025-09-24 13:17:30.879] ubi0:textures is mounted. [2025-09-24 13:17:30.952] ubi1:animations is mounted. [2025-09-24 13:17:30.952] RTNETLINK answers: File exists [2025-09-24 13:17:30.952] ubi2:dml_code is mounted. [2025-09-24 13:17:30.952] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:17:30.952] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:17:30.952] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:17:30.952] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:17:30.952] data.LB_FadeInType0=100 [2025-09-24 13:17:30.952] data.CHLH_FadeInType0=0 [2025-09-24 13:17:30.952] data.WU_FadeInDelay=0 [2025-09-24 13:17:30.952] max_time_out=0 [2025-09-24 13:17:30.952] No splash screen [2025-09-24 13:17:30.952] stop dss Done [2025-09-24 13:17:30.952] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:17:31.021] /dev/mem opened. [2025-09-24 13:17:31.021] Memory mapped at address 0xffffb292a000. [2025-09-24 13:17:31.021] Read at address 0x00600018 (0xffffb292a018): 0x00000000 [2025-09-24 13:17:31.021] Write at address 0x00600018 (0xffffb292a018): 0x00400040, readback 0x00400040 [2025-09-24 13:17:31.053] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:17:31.069] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:17:31.261] Loaded PowerVR consumer services. [2025-09-24 13:17:31.277] Waiting data available... [2025-09-24 13:17:31.293] 512+0 records in [2025-09-24 13:17:31.293] 512+0 records out [2025-09-24 13:17:31.341] Starting syslogd/klogd: done [2025-09-24 13:17:31.357] DML Start [2025-09-24 13:17:31.517] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:17:31.741] DML res1: 0 [2025-09-24 13:17:32.226] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:17:32.226] Read Success [2025-09-24 13:17:32.226] Verifying certificate... [2025-09-24 13:17:32.467] Verified OK [2025-09-24 13:17:32.483] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:17:34.104] Verified OK [2025-09-24 13:17:34.104] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:17:34.704] Verified OK [2025-09-24 13:17:34.704] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:17:37.274] fs.protected_hardlinks = 1 [2025-09-24 13:17:37.274] fs.protected_symlinks = 1 [2025-09-24 13:17:37.274] kernel.modules_disabled = 1 [2025-09-24 13:17:37.449] [2025-09-24 13:17:37.449] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:17:38.771] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:17:46.572] SBL1:1210.0.1.0 [2025-09-24 13:17:46.604] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:17:48.186] SBL2:1210.0.1.0 [2025-09-24 13:17:48.218] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:17:48.330] j-A [2025-09-24 13:17:55.706] The R5 Autosar Classic is running [2025-09-24 13:17:55.706] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:17:55.706] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:17:56.313] INIT: version 2.96 booting [2025-09-24 13:17:56.425] INIT: Entering runlevel: 5 [2025-09-24 13:17:56.585] mtd32 attached [2025-09-24 13:17:56.585] mtd24 attached [2025-09-24 13:17:56.601] mtd28 attached [2025-09-24 13:17:56.649] RTNETLINK answers: File exists [2025-09-24 13:17:56.649] ubi1:textures is mounted. [2025-09-24 13:17:56.684] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:17:56.684] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:17:56.684] ubi0:dml_code is mounted. [2025-09-24 13:17:56.684] ubi2:animations is mounted. [2025-09-24 13:17:56.684] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:17:56.684] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:17:56.684] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:17:56.710] data.LB_FadeInType0=100 [2025-09-24 13:17:56.710] data.CHLH_FadeInType0=0 [2025-09-24 13:17:56.710] data.WU_FadeInDelay=0 [2025-09-24 13:17:56.710] max_time_out=0 [2025-09-24 13:17:56.710] No splash screen [2025-09-24 13:17:56.710] stop dss Done [2025-09-24 13:17:56.742] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:17:56.758] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:17:56.795] /dev/mem opened. [2025-09-24 13:17:56.795] Memory mapped at address 0xffffa1f28000. [2025-09-24 13:17:56.795] Read at address 0x00600018 (0xffffa1f28018): 0x00000000 [2025-09-24 13:17:56.795] Write at address 0x00600018 (0xffffa1f28018): 0x00400040, readback 0x00400040 [2025-09-24 13:17:56.875] Loaded PowerVR consumer services. [2025-09-24 13:17:57.034] Waiting data available... [2025-09-24 13:17:57.066] 512+0 records in [2025-09-24 13:17:57.066] 512+0 records out [2025-09-24 13:17:57.082] Starting syslogd/klogd: done [2025-09-24 13:17:57.098] DML Start [2025-09-24 13:17:57.322] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:17:57.546] DML res1: 0 [2025-09-24 13:17:57.911] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:17:57.911] Read Success [2025-09-24 13:17:57.911] Verifying certificate... [2025-09-24 13:17:58.166] Verified OK [2025-09-24 13:17:58.182] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:17:59.814] Verified OK [2025-09-24 13:17:59.814] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:18:00.479] Verified OK [2025-09-24 13:18:00.479] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:18:03.164] fs.protected_hardlinks = 1 [2025-09-24 13:18:03.164] fs.protected_symlinks = 1 [2025-09-24 13:18:03.164] kernel.modules_disabled = 1 [2025-09-24 13:18:03.356] [2025-09-24 13:18:03.356] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:18:04.601] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:18:12.344] SBL1:1210.0.1.0 [2025-09-24 13:18:12.376] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:18:13.959] SBL2:1210.0.1.0 [2025-09-24 13:18:13.990] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:18:14.102] j-A [2025-09-24 13:18:21.457] The R5 Autosar Classic is running [2025-09-24 13:18:21.457] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:18:21.478] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:18:22.085] INIT: version 2.96 booting [2025-09-24 13:18:22.197] INIT: Entering runlevel: 5 [2025-09-24 13:18:22.357] mtd28 attached [2025-09-24 13:18:22.357] mtd24 attached [2025-09-24 13:18:22.373] mtd32 attached [2025-09-24 13:18:22.421] RTNETLINK answers: File exists [2025-09-24 13:18:22.486] ubi0:animations is mounted. [2025-09-24 13:18:22.486] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:18:22.486] ubi1:textures is mounted. [2025-09-24 13:18:22.486] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:18:22.486] ubi2:dml_code is mounted. [2025-09-24 13:18:22.486] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:18:22.486] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:18:22.486] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:18:22.486] data.LB_FadeInType0=100 [2025-09-24 13:18:22.486] data.CHLH_FadeInType0=0 [2025-09-24 13:18:22.486] data.WU_FadeInDelay=0 [2025-09-24 13:18:22.486] max_time_out=0 [2025-09-24 13:18:22.486] No splash screen [2025-09-24 13:18:22.486] stop dss Done [2025-09-24 13:18:22.526] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:18:22.526] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:18:22.561] /dev/mem opened. [2025-09-24 13:18:22.561] Memory mapped at address 0xffff993ba000. [2025-09-24 13:18:22.561] Read at address 0x00600018 (0xffff993ba018): 0x00000000 [2025-09-24 13:18:22.561] Write at address 0x00600018 (0xffff993ba018): 0x00400040, readback 0x00400040 [2025-09-24 13:18:22.642] Loaded PowerVR consumer services. [2025-09-24 13:18:22.818] Waiting data available... [2025-09-24 13:18:22.834] 512+0 records in [2025-09-24 13:18:22.834] 512+0 records out [2025-09-24 13:18:22.882] Starting syslogd/klogd: done [2025-09-24 13:18:22.898] DML Start [2025-09-24 13:18:23.089] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:18:23.313] DML res1: 0 [2025-09-24 13:18:23.697] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:18:23.718] Read Success [2025-09-24 13:18:23.718] Verifying certificate... [2025-09-24 13:18:23.958] Verified OK [2025-09-24 13:18:23.958] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:18:25.583] Verified OK [2025-09-24 13:18:25.583] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:18:26.205] Verified OK [2025-09-24 13:18:26.205] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:18:28.908] fs.protected_hardlinks = 1 [2025-09-24 13:18:28.938] fs.protected_symlinks = 1 [2025-09-24 13:18:28.938] kernel.modules_disabled = 1 [2025-09-24 13:18:29.131] [2025-09-24 13:18:29.131] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:18:30.356] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:18:38.131] SBL1:1210.0.1.0 [2025-09-24 13:18:38.179] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:18:39.746] SBL2:1210.0.1.0 [2025-09-24 13:18:39.794] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:18:39.905] j-A [2025-09-24 13:18:47.243] The R5 Autosar Classic is running [2025-09-24 13:18:47.268] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:18:47.268] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:18:47.875] INIT: version 2.96 booting [2025-09-24 13:18:47.988] INIT: Entering runlevel: 5 [2025-09-24 13:18:48.147] mtd28 attached [2025-09-24 13:18:48.147] mtd32 attached [2025-09-24 13:18:48.163] mtd24 attached [2025-09-24 13:18:48.211] RTNETLINK answers: File exists [2025-09-24 13:18:48.211] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:18:48.254] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:18:48.254] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:18:48.254] ubi0:animations is mounted. [2025-09-24 13:18:48.254] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:18:48.254] ubi2:textures is mounted. [2025-09-24 13:18:48.254] ubi1:dml_code is mounted. [2025-09-24 13:18:48.254] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:18:48.270] data.LB_FadeInType0=100 [2025-09-24 13:18:48.270] data.CHLH_FadeInType0=0 [2025-09-24 13:18:48.270] data.WU_FadeInDelay=0 [2025-09-24 13:18:48.291] max_time_out=0 [2025-09-24 13:18:48.291] No splash screen [2025-09-24 13:18:48.291] stop dss Done [2025-09-24 13:18:48.291] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:18:48.307] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:18:48.323] /dev/mem opened. [2025-09-24 13:18:48.323] Memory mapped at address 0xffff8273a000. [2025-09-24 13:18:48.349] Read at address 0x00600018 (0xffff8273a018): 0x00000000 [2025-09-24 13:18:48.349] Write at address 0x00600018 (0xffff8273a018): 0x00400040, readback 0x00400040 [2025-09-24 13:18:48.572] Loaded PowerVR consumer services. [2025-09-24 13:18:48.604] Waiting data available... [2025-09-24 13:18:48.636] 512+0 records in [2025-09-24 13:18:48.636] 512+0 records out [2025-09-24 13:18:48.652] Starting syslogd/klogd: done [2025-09-24 13:18:48.684] DML Start [2025-09-24 13:18:48.844] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:18:49.068] DML res1: 0 [2025-09-24 13:18:49.500] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:18:49.521] Read Success [2025-09-24 13:18:49.521] Verifying certificate... [2025-09-24 13:18:49.744] Verified OK [2025-09-24 13:18:49.744] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:18:51.479] Verified OK [2025-09-24 13:18:51.479] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:18:52.119] Verified OK [2025-09-24 13:18:52.119] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:18:54.774] fs.protected_hardlinks = 1 [2025-09-24 13:18:54.789] fs.protected_symlinks = 1 [2025-09-24 13:18:54.789] kernel.modules_disabled = 1 [2025-09-24 13:18:54.982] [2025-09-24 13:18:54.982] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:18:56.141] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:19:03.896] SBL1:1210.0.1.0 [2025-09-24 13:19:03.945] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:19:05.511] SBL2:1210.0.1.0 [2025-09-24 13:19:05.559] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:19:05.654] j-A [2025-09-24 13:19:13.009] The R5 Autosar Classic is running [2025-09-24 13:19:13.032] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:19:13.032] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:19:13.639] INIT: version 2.96 booting [2025-09-24 13:19:13.751] INIT: Entering runlevel: 5 [2025-09-24 13:19:13.911] mtd32 attached [2025-09-24 13:19:13.927] mtd28 attached [2025-09-24 13:19:13.927] mtd24 attached [2025-09-24 13:19:13.975] ubi0:dml_code is mounted. [2025-09-24 13:19:14.041] ubi1:animations is mounted. [2025-09-24 13:19:14.041] RTNETLINK answers: File exists [2025-09-24 13:19:14.041] ubi2:textures is mounted. [2025-09-24 13:19:14.041] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:19:14.041] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:19:14.041] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:19:14.041] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:19:14.041] data.LB_FadeInType0=100 [2025-09-24 13:19:14.041] data.CHLH_FadeInType0=0 [2025-09-24 13:19:14.041] data.WU_FadeInDelay=0 [2025-09-24 13:19:14.041] max_time_out=0 [2025-09-24 13:19:14.041] No splash screen [2025-09-24 13:19:14.041] stop dss Done [2025-09-24 13:19:14.041] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:19:14.089] /dev/mem opened. [2025-09-24 13:19:14.089] Memory mapped at address 0xffff85826000. [2025-09-24 13:19:14.114] Read at address 0x00600018 (0xffff85826018): 0x00000000 [2025-09-24 13:19:14.114] Write at address 0x00600018 (0xffff85826018): 0x00400040, readback 0x00400040 [2025-09-24 13:19:14.114] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:19:14.130] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:19:14.291] Loaded PowerVR consumer services. [2025-09-24 13:19:14.386] Waiting data available... [2025-09-24 13:19:14.418] 512+0 records in [2025-09-24 13:19:14.418] 512+0 records out [2025-09-24 13:19:14.467] Starting syslogd/klogd: done [2025-09-24 13:19:14.483] DML Start [2025-09-24 13:19:14.642] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:19:14.850] DML res1: 0 [2025-09-24 13:19:15.314] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:19:15.334] Read Success [2025-09-24 13:19:15.334] Verifying certificate... [2025-09-24 13:19:15.559] Verified OK [2025-09-24 13:19:15.574] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:19:17.205] Verified OK [2025-09-24 13:19:17.226] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:19:17.814] Verified OK [2025-09-24 13:19:17.814] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:19:20.468] fs.protected_hardlinks = 1 [2025-09-24 13:19:20.498] fs.protected_symlinks = 1 [2025-09-24 13:19:20.498] kernel.modules_disabled = 1 [2025-09-24 13:19:20.690] [2025-09-24 13:19:20.690] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:19:21.914] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:19:29.655] SBL1:1210.0.1.0 [2025-09-24 13:19:29.703] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:19:31.270] SBL2:1210.0.1.0 [2025-09-24 13:19:31.318] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:19:31.430] j-A [2025-09-24 13:19:38.799] The R5 Autosar Classic is running [2025-09-24 13:19:38.799] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:19:38.799] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:19:39.407] INIT: version 2.96 booting [2025-09-24 13:19:39.519] INIT: Entering runlevel: 5 [2025-09-24 13:19:39.662] mtd28 attached [2025-09-24 13:19:39.679] mtd24 attached [2025-09-24 13:19:39.695] mtd32 attached [2025-09-24 13:19:39.802] ubi0:animations is mounted. [2025-09-24 13:19:39.802] RTNETLINK answers: File exists [2025-09-24 13:19:39.802] ubi1:textures is mounted. [2025-09-24 13:19:39.802] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:19:39.802] ubi2:dml_code is mounted. [2025-09-24 13:19:39.802] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:19:39.802] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:19:39.802] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:19:39.802] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:19:39.802] data.LB_FadeInType0=100 [2025-09-24 13:19:39.802] data.CHLH_FadeInType0=0 [2025-09-24 13:19:39.802] data.WU_FadeInDelay=0 [2025-09-24 13:19:39.802] max_time_out=0 [2025-09-24 13:19:39.802] No splash screen [2025-09-24 13:19:39.802] stop dss Done [2025-09-24 13:19:39.880] /dev/mem opened. [2025-09-24 13:19:39.880] Memory mapped at address 0xffffba475000. [2025-09-24 13:19:39.880] Read at address 0x00600018 (0xffffba475018): 0x00000000 [2025-09-24 13:19:39.880] Write at address 0x00600018 (0xffffba475018): 0x00400040, readback 0x00400040 [2025-09-24 13:19:39.880] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:19:39.880] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:19:40.024] Loaded PowerVR consumer services. [2025-09-24 13:19:40.135] Waiting data available... [2025-09-24 13:19:40.151] 512+0 records in [2025-09-24 13:19:40.167] 512+0 records out [2025-09-24 13:19:40.199] Starting syslogd/klogd: done [2025-09-24 13:19:40.215] DML Start [2025-09-24 13:19:40.408] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:19:40.631] DML res1: 0 [2025-09-24 13:19:41.077] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:19:41.077] Read Success [2025-09-24 13:19:41.077] Verifying certificate... [2025-09-24 13:19:41.302] Verified OK [2025-09-24 13:19:41.318] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:19:42.970] Verified OK [2025-09-24 13:19:42.970] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:19:43.552] Verified OK [2025-09-24 13:19:43.552] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:19:46.253] fs.protected_hardlinks = 1 [2025-09-24 13:19:46.269] fs.protected_symlinks = 1 [2025-09-24 13:19:46.269] kernel.modules_disabled = 1 [2025-09-24 13:19:46.477] [2025-09-24 13:19:46.477] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:19:47.683] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:19:55.420] SBL1:1210.0.1.0 [2025-09-24 13:19:55.469] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:19:57.035] SBL2:1210.0.1.0 [2025-09-24 13:19:57.083] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:19:57.195] j-A [2025-09-24 13:20:04.565] The R5 Autosar Classic is running [2025-09-24 13:20:04.565] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:20:04.565] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:20:05.173] INIT: version 2.96 booting [2025-09-24 13:20:05.284] INIT: Entering runlevel: 5 [2025-09-24 13:20:05.428] mtd32 attached [2025-09-24 13:20:05.443] mtd28 attached [2025-09-24 13:20:05.459] mtd24 attached [2025-09-24 13:20:05.475] ubi0:dml_code is mounted. [2025-09-24 13:20:05.491] RTNETLINK answers: File exists [2025-09-24 13:20:05.559] ubi2:textures is mounted. [2025-09-24 13:20:05.559] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:20:05.559] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:20:05.559] ubi1:animations is mounted. [2025-09-24 13:20:05.559] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:20:05.559] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:20:05.559] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:20:05.559] data.LB_FadeInType0=100 [2025-09-24 13:20:05.559] data.CHLH_FadeInType0=0 [2025-09-24 13:20:05.559] data.WU_FadeInDelay=0 [2025-09-24 13:20:05.559] max_time_out=0 [2025-09-24 13:20:05.559] No splash screen [2025-09-24 13:20:05.559] stop dss Done [2025-09-24 13:20:05.591] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:20:05.633] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:20:05.633] /dev/mem opened. [2025-09-24 13:20:05.633] Memory mapped at address 0xffff98ab5000. [2025-09-24 13:20:05.633] Read at address 0x00600018 (0xffff98ab5018): 0x00000000 [2025-09-24 13:20:05.633] Write at address 0x00600018 (0xffff98ab5018): 0x00400040, readback 0x00400040 [2025-09-24 13:20:05.744] Loaded PowerVR consumer services. [2025-09-24 13:20:05.888] Waiting data available... [2025-09-24 13:20:05.904] 512+0 records in [2025-09-24 13:20:05.904] 512+0 records out [2025-09-24 13:20:05.937] Starting syslogd/klogd: done [2025-09-24 13:20:05.953] DML Start [2025-09-24 13:20:06.096] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:20:06.368] DML res1: 0 [2025-09-24 13:20:06.815] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:20:06.816] Read Success [2025-09-24 13:20:06.831] Verifying certificate... [2025-09-24 13:20:07.072] Verified OK [2025-09-24 13:20:07.088] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:20:08.732] Verified OK [2025-09-24 13:20:08.732] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:20:09.368] Verified OK [2025-09-24 13:20:09.368] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:20:12.006] fs.protected_hardlinks = 1 [2025-09-24 13:20:12.022] fs.protected_symlinks = 1 [2025-09-24 13:20:12.022] kernel.modules_disabled = 1 [2025-09-24 13:20:12.214] [2025-09-24 13:20:12.214] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:20:13.413] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:20:21.177] SBL1:1210.0.1.0 [2025-09-24 13:20:21.225] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:20:22.792] SBL2:1210.0.1.0 [2025-09-24 13:20:22.840] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:20:22.936] j-A [2025-09-24 13:20:30.290] The R5 Autosar Classic is running [2025-09-24 13:20:30.312] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:20:30.312] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:20:30.919] INIT: version 2.96 booting [2025-09-24 13:20:31.031] INIT: Entering runlevel: 5 [2025-09-24 13:20:31.175] mtd24 attached [2025-09-24 13:20:31.191] mtd32 attached [2025-09-24 13:20:31.207] mtd28 attached [2025-09-24 13:20:31.255] ubi0:textures is mounted. [2025-09-24 13:20:31.255] RTNETLINK answers: File exists [2025-09-24 13:20:31.312] ubi1:dml_code is mounted. [2025-09-24 13:20:31.312] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:20:31.312] ubi2:animations is mounted. [2025-09-24 13:20:31.312] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:20:31.312] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:20:31.312] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:20:31.312] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:20:31.312] data.LB_FadeInType0=100 [2025-09-24 13:20:31.312] data.CHLH_FadeInType0=0 [2025-09-24 13:20:31.312] data.WU_FadeInDelay=0 [2025-09-24 13:20:31.312] max_time_out=0 [2025-09-24 13:20:31.312] No splash screen [2025-09-24 13:20:31.312] stop dss Done [2025-09-24 13:20:31.344] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:20:31.360] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:20:31.360] /dev/mem opened. [2025-09-24 13:20:31.392] Memory mapped at address 0xffff9d2ad000. [2025-09-24 13:20:31.392] Read at address 0x00600018 (0xffff9d2ad018): 0x00000000 [2025-09-24 13:20:31.392] Write at address 0x00600018 (0xffff9d2ad018): 0x00400040, readback 0x00400040 [2025-09-24 13:20:31.504] Loaded PowerVR consumer services. [2025-09-24 13:20:31.648] Waiting data available... [2025-09-24 13:20:31.679] 512+0 records in [2025-09-24 13:20:31.679] 512+0 records out [2025-09-24 13:20:31.727] Starting syslogd/klogd: done [2025-09-24 13:20:31.743] DML Start [2025-09-24 13:20:31.919] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:20:32.143] DML res1: 0 [2025-09-24 13:20:32.571] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:20:32.571] Read Success [2025-09-24 13:20:32.571] Verifying certificate... [2025-09-24 13:20:32.794] Verified OK [2025-09-24 13:20:32.810] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:20:34.577] Verified OK [2025-09-24 13:20:34.577] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:20:35.120] Verified OK [2025-09-24 13:20:35.120] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:20:37.822] fs.protected_hardlinks = 1 [2025-09-24 13:20:37.822] fs.protected_symlinks = 1 [2025-09-24 13:20:37.838] kernel.modules_disabled = 1 [2025-09-24 13:20:38.030] [2025-09-24 13:20:38.030] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:20:39.171] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:20:46.933] SBL1:1210.0.1.0 [2025-09-24 13:20:46.965] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:20:48.548] SBL2:1210.0.1.0 [2025-09-24 13:20:48.580] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 13:20:48.692] j-A [2025-09-24 13:20:56.047] The R5 Autosar Classic is running [2025-09-24 13:20:56.047] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:20:56.068] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:20:56.675] INIT: version 2.96 booting [2025-09-24 13:20:56.787] INIT: Entering runlevel: 5 [2025-09-24 13:20:56.947] mtd28 attached [2025-09-24 13:20:56.947] mtd24 attached [2025-09-24 13:20:56.963] mtd32 attached [2025-09-24 13:20:56.995] ubi0:animations is mounted. [2025-09-24 13:20:57.011] ubi1:textures is mounted. [2025-09-24 13:20:57.083] RTNETLINK answers: File exists [2025-09-24 13:20:57.083] ubi2:dml_code is mounted. [2025-09-24 13:20:57.083] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:20:57.083] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:20:57.083] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:20:57.083] data.LB_FadeInType0=100 [2025-09-24 13:20:57.083] data.CHLH_FadeInType0=0 [2025-09-24 13:20:57.083] data.WU_FadeInDelay=0 [2025-09-24 13:20:57.083] max_time_out=0 [2025-09-24 13:20:57.083] No splash screen [2025-09-24 13:20:57.083] stop dss Done [2025-09-24 13:20:57.083] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:20:57.083] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:20:57.099] /dev/mem opened. [2025-09-24 13:20:57.099] Memory mapped at address 0xffff94d25000. [2025-09-24 13:20:57.125] Read at address 0x00600018 (0xffff94d25018): 0x00000000 [2025-09-24 13:20:57.125] Write at address 0x00600018 (0xffff94d25018): 0x00400040, readback 0x00400040 [2025-09-24 13:20:57.204] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:20:57.204] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:20:57.397] Waiting data available... [2025-09-24 13:20:57.413] Loaded PowerVR consumer services. [2025-09-24 13:20:57.444] 512+0 records in [2025-09-24 13:20:57.444] 512+0 records out [2025-09-24 13:20:57.492] Starting syslogd/klogd: done [2025-09-24 13:20:57.508] DML Start [2025-09-24 13:20:57.684] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:20:57.940] DML res1: 0 [2025-09-24 13:20:58.347] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:20:58.347] Read Success [2025-09-24 13:20:58.347] Verifying certificate... [2025-09-24 13:20:58.587] Verified OK [2025-09-24 13:20:58.603] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:21:00.298] Verified OK [2025-09-24 13:21:00.298] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:21:00.889] Verified OK [2025-09-24 13:21:00.905] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:21:03.480] fs.protected_hardlinks = 1 [2025-09-24 13:21:03.480] fs.protected_symlinks = 1 [2025-09-24 13:21:03.495] kernel.modules_disabled = 1 [2025-09-24 13:21:03.688] [2025-09-24 13:21:03.688] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:21:04.999] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:21:12.697] SBL1:1210.0.1.0 [2025-09-24 13:21:12.745] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:21:14.312] SBL2:1210.0.1.0 [2025-09-24 13:21:14.360] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:21:14.456] j-A [2025-09-24 13:21:21.811] The R5 Autosar Classic is running [2025-09-24 13:21:21.836] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:21:21.836] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:21:22.444] INIT: version 2.96 booting [2025-09-24 13:21:22.555] INIT: Entering runlevel: 5 [2025-09-24 13:21:22.715] mtd28 attached [2025-09-24 13:21:22.731] mtd24 attached [2025-09-24 13:21:22.731] mtd32 attached [2025-09-24 13:21:22.746] ubi0:animations is mounted. [2025-09-24 13:21:22.779] RTNETLINK answers: File exists [2025-09-24 13:21:22.826] ubi2:dml_code is mounted. [2025-09-24 13:21:22.826] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:21:22.826] ubi1:textures is mounted. [2025-09-24 13:21:22.826] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:21:22.826] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:21:22.826] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:21:22.826] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:21:22.847] data.LB_FadeInType0=100 [2025-09-24 13:21:22.847] data.CHLH_FadeInType0=0 [2025-09-24 13:21:22.847] data.WU_FadeInDelay=0 [2025-09-24 13:21:22.847] max_time_out=0 [2025-09-24 13:21:22.847] No splash screen [2025-09-24 13:21:22.847] stop dss Done [2025-09-24 13:21:22.895] /dev/mem opened. [2025-09-24 13:21:22.895] Memory mapped at address 0xffffb0146000. [2025-09-24 13:21:22.927] Read at address 0x00600018 (0xffffb0146018): 0x00000000 [2025-09-24 13:21:22.927] Write at address 0x00600018 (0xffffb0146018): 0x00400040, readback 0x00400040 [2025-09-24 13:21:22.927] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:21:22.927] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:21:23.151] Loaded PowerVR consumer services. [2025-09-24 13:21:23.199] Waiting data available... [2025-09-24 13:21:23.214] 512+0 records in [2025-09-24 13:21:23.231] 512+0 records out [2025-09-24 13:21:23.278] Starting syslogd/klogd: done [2025-09-24 13:21:23.294] DML Start [2025-09-24 13:21:23.455] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:21:23.695] DML res1: 0 [2025-09-24 13:21:24.084] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:21:24.084] Read Success [2025-09-24 13:21:24.084] Verifying certificate... [2025-09-24 13:21:24.324] Verified OK [2025-09-24 13:21:24.340] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:21:26.050] Verified OK [2025-09-24 13:21:26.050] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:21:26.658] Verified OK [2025-09-24 13:21:26.658] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:21:29.296] fs.protected_hardlinks = 1 [2025-09-24 13:21:29.296] fs.protected_symlinks = 1 [2025-09-24 13:21:29.311] kernel.modules_disabled = 1 [2025-09-24 13:21:29.504] [2025-09-24 13:21:29.504] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:21:30.785] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:21:38.474] SBL1:1210.0.1.0 [2025-09-24 13:21:38.506] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:21:40.088] SBL2:1210.0.1.0 [2025-09-24 13:21:40.120] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:21:40.232] j-A [2025-09-24 13:21:47.604] The R5 Autosar Classic is running [2025-09-24 13:21:47.604] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:21:47.604] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:21:48.212] INIT: version 2.96 booting [2025-09-24 13:21:48.323] INIT: Entering runlevel: 5 [2025-09-24 13:21:48.483] mtd32 attached [2025-09-24 13:21:48.483] mtd24 attached [2025-09-24 13:21:48.499] mtd28 attached [2025-09-24 13:21:48.547] ubi0:dml_code is mounted. [2025-09-24 13:21:48.547] RTNETLINK answers: File exists [2025-09-24 13:21:48.607] ubi1:textures is mounted. [2025-09-24 13:21:48.607] ubi2:animations is mounted. [2025-09-24 13:21:48.607] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:21:48.607] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:21:48.607] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:21:48.607] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:21:48.607] data.LB_FadeInType0=100 [2025-09-24 13:21:48.607] data.CHLH_FadeInType0=0 [2025-09-24 13:21:48.607] data.WU_FadeInDelay=0 [2025-09-24 13:21:48.607] max_time_out=0 [2025-09-24 13:21:48.607] No splash screen [2025-09-24 13:21:48.607] stop dss Done [2025-09-24 13:21:48.607] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:21:48.639] /dev/mem opened. [2025-09-24 13:21:48.639] Memory mapped at address 0xffffbbc2a000. [2025-09-24 13:21:48.639] Read at address 0x00600018 (0xffffbbc2a018): 0x00000000 [2025-09-24 13:21:48.665] Write at address 0x00600018 (0xffffbbc2a018): 0x00400040, readback 0x00400040 [2025-09-24 13:21:48.680] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:21:48.696] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:21:48.904] Loaded PowerVR consumer services. [2025-09-24 13:21:48.952] Waiting data available... [2025-09-24 13:21:48.984] 512+0 records in [2025-09-24 13:21:48.984] 512+0 records out [2025-09-24 13:21:48.999] Starting syslogd/klogd: done [2025-09-24 13:21:49.015] DML Start [2025-09-24 13:21:49.224] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:21:49.416] DML res1: 0 [2025-09-24 13:21:49.863] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:21:49.884] Read Success [2025-09-24 13:21:49.884] Verifying certificate... [2025-09-24 13:21:50.124] Verified OK [2025-09-24 13:21:50.140] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:21:51.881] Verified OK [2025-09-24 13:21:51.881] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:21:52.499] Verified OK [2025-09-24 13:21:52.499] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:21:55.041] fs.protected_hardlinks = 1 [2025-09-24 13:21:55.071] fs.protected_symlinks = 1 [2025-09-24 13:21:55.071] kernel.modules_disabled = 1 [2025-09-24 13:21:55.279] [2025-09-24 13:21:55.279] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:21:56.465] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:22:04.253] SBL1:1210.0.1.0 [2025-09-24 13:22:04.285] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:22:05.867] SBL2:1210.0.1.0 [2025-09-24 13:22:05.899] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:22:06.012] j-A [2025-09-24 13:22:13.386] The R5 Autosar Classic is running [2025-09-24 13:22:13.386] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:22:13.386] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:22:13.994] INIT: version 2.96 booting [2025-09-24 13:22:14.105] INIT: Entering runlevel: 5 [2025-09-24 13:22:14.265] mtd28 attached [2025-09-24 13:22:14.281] mtd24 attached [2025-09-24 13:22:14.297] mtd32 attached [2025-09-24 13:22:14.330] ubi0:animations is mounted. [2025-09-24 13:22:14.345] RTNETLINK answers: File exists [2025-09-24 13:22:14.345] ubi1:textures is mounted. [2025-09-24 13:22:14.397] ubi2:dml_code is mounted. [2025-09-24 13:22:14.397] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:22:14.397] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:22:14.397] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:22:14.397] data.LB_FadeInType0=100 [2025-09-24 13:22:14.397] data.CHLH_FadeInType0=0 [2025-09-24 13:22:14.397] data.WU_FadeInDelay=0 [2025-09-24 13:22:14.397] max_time_out=0 [2025-09-24 13:22:14.397] No splash screen [2025-09-24 13:22:14.397] stop dss Done [2025-09-24 13:22:14.397] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:22:14.397] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:22:14.429] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:22:14.429] /dev/mem opened. [2025-09-24 13:22:14.462] Memory mapped at address 0xffff9aba8000. [2025-09-24 13:22:14.462] Read at address 0x00600018 (0xffff9aba8018): 0x00000000 [2025-09-24 13:22:14.462] Write at address 0x00600018 (0xffff9aba8018): 0x00400040, readback 0x00400040 [2025-09-24 13:22:14.462] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:22:14.589] Loaded PowerVR consumer services. [2025-09-24 13:22:14.733] Waiting data available... [2025-09-24 13:22:14.748] 512+0 records in [2025-09-24 13:22:14.748] 512+0 records out [2025-09-24 13:22:14.796] Starting syslogd/klogd: done [2025-09-24 13:22:14.812] DML Start [2025-09-24 13:22:14.988] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:22:15.197] DML res1: 0 [2025-09-24 13:22:15.697] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:22:15.697] Read Success [2025-09-24 13:22:15.697] Verifying certificate... [2025-09-24 13:22:15.969] Verified OK [2025-09-24 13:22:15.985] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:22:17.696] Verified OK [2025-09-24 13:22:17.696] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:22:18.222] Verified OK [2025-09-24 13:22:18.239] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:22:20.733] fs.protected_hardlinks = 1 [2025-09-24 13:22:20.749] fs.protected_symlinks = 1 [2025-09-24 13:22:20.749] kernel.modules_disabled = 1 [2025-09-24 13:22:20.941] [2025-09-24 13:22:20.941] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:22:22.278] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:22:30.003] SBL1:1210.0.1.0 [2025-09-24 13:22:30.034] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:22:31.617] SBL2:1210.0.1.0 [2025-09-24 13:22:31.649] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:22:31.761] j-A [2025-09-24 13:22:39.115] The R5 Autosar Classic is running [2025-09-24 13:22:39.115] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:22:39.136] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:22:39.744] INIT: version 2.96 booting [2025-09-24 13:22:39.856] INIT: Entering runlevel: 5 [2025-09-24 13:22:40.016] mtd32 attached [2025-09-24 13:22:40.016] mtd24 attached [2025-09-24 13:22:40.032] mtd28 attached [2025-09-24 13:22:40.080] RTNETLINK answers: File exists [2025-09-24 13:22:40.123] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:22:40.123] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:22:40.123] ubi2:animations is mounted. [2025-09-24 13:22:40.123] ubi1:textures is mounted. [2025-09-24 13:22:40.123] ubi0:dml_code is mounted. [2025-09-24 13:22:40.123] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:22:40.123] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:22:40.123] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:22:40.147] data.LB_FadeInType0=100 [2025-09-24 13:22:40.147] data.CHLH_FadeInType0=0 [2025-09-24 13:22:40.147] data.WU_FadeInDelay=0 [2025-09-24 13:22:40.147] max_time_out=0 [2025-09-24 13:22:40.147] No splash screen [2025-09-24 13:22:40.147] stop dss Done [2025-09-24 13:22:40.163] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:22:40.163] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:22:40.195] /dev/mem opened. [2025-09-24 13:22:40.195] Memory mapped at address 0xffff84a11000. [2025-09-24 13:22:40.221] Read at address 0x00600018 (0xffff84a11018): 0x00000000 [2025-09-24 13:22:40.221] Write at address 0x00600018 (0xffff84a11018): 0x00400040, readback 0x00400040 [2025-09-24 13:22:40.332] Loaded PowerVR consumer services. [2025-09-24 13:22:40.477] Waiting data available... [2025-09-24 13:22:40.493] 512+0 records in [2025-09-24 13:22:40.493] 512+0 records out [2025-09-24 13:22:40.557] Starting syslogd/klogd: done [2025-09-24 13:22:40.572] DML Start [2025-09-24 13:22:40.732] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:22:40.956] DML res1: 0 [2025-09-24 13:22:41.398] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:22:41.398] Read Success [2025-09-24 13:22:41.398] Verifying certificate... [2025-09-24 13:22:41.638] Verified OK [2025-09-24 13:22:41.670] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:22:43.237] Verified OK [2025-09-24 13:22:43.237] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:22:43.915] Verified OK [2025-09-24 13:22:43.915] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:22:46.633] fs.protected_hardlinks = 1 [2025-09-24 13:22:46.633] fs.protected_symlinks = 1 [2025-09-24 13:22:46.649] kernel.modules_disabled = 1 [2025-09-24 13:22:46.841] [2025-09-24 13:22:46.841] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:22:48.055] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:22:55.752] SBL1:1210.0.1.0 [2025-09-24 13:22:55.800] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:22:57.367] SBL2:1210.0.1.0 [2025-09-24 13:22:57.415] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:22:57.511] j-A [2025-09-24 13:23:04.865] The R5 Autosar Classic is running [2025-09-24 13:23:04.888] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:23:04.888] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:23:05.496] INIT: version 2.96 booting [2025-09-24 13:23:05.607] INIT: Entering runlevel: 5 [2025-09-24 13:23:05.751] mtd28 attached [2025-09-24 13:23:05.767] mtd32 attached [2025-09-24 13:23:05.783] mtd24 attached [2025-09-24 13:23:05.831] RTNETLINK answers: File exists [2025-09-24 13:23:05.831] ubi0:animations is mounted. [2025-09-24 13:23:05.869] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:23:05.869] ubi2:textures is mounted. [2025-09-24 13:23:05.869] ubi1:dml_code is mounted. [2025-09-24 13:23:05.869] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:23:05.869] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:23:05.869] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:23:05.869] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:23:05.898] data.LB_FadeInType0=100 [2025-09-24 13:23:05.898] data.CHLH_FadeInType0=0 [2025-09-24 13:23:05.898] data.WU_FadeInDelay=0 [2025-09-24 13:23:05.898] max_time_out=0 [2025-09-24 13:23:05.898] No splash screen [2025-09-24 13:23:05.898] stop dss Done [2025-09-24 13:23:05.914] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:23:05.930] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:23:05.946] /dev/mem opened. [2025-09-24 13:23:05.946] Memory mapped at address 0xffffb262d000. [2025-09-24 13:23:05.972] Read at address 0x00600018 (0xffffb262d018): 0x00000000 [2025-09-24 13:23:05.972] Write at address 0x00600018 (0xffffb262d018): 0x00400040, readback 0x00400040 [2025-09-24 13:23:06.052] Loaded PowerVR consumer services. [2025-09-24 13:23:06.228] Waiting data available... [2025-09-24 13:23:06.244] 512+0 records in [2025-09-24 13:23:06.244] 512+0 records out [2025-09-24 13:23:06.260] Starting syslogd/klogd: done [2025-09-24 13:23:06.276] DML Start [2025-09-24 13:23:06.468] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:23:06.691] DML res1: 0 [2025-09-24 13:23:07.123] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:23:07.144] Read Success [2025-09-24 13:23:07.144] Verifying certificate... [2025-09-24 13:23:07.400] Verified OK [2025-09-24 13:23:07.416] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:23:09.220] Verified OK [2025-09-24 13:23:09.220] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:23:09.732] Verified OK [2025-09-24 13:23:09.732] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:23:12.227] fs.protected_hardlinks = 1 [2025-09-24 13:23:12.227] fs.protected_symlinks = 1 [2025-09-24 13:23:12.243] kernel.modules_disabled = 1 [2025-09-24 13:23:12.435] [2025-09-24 13:23:12.435] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:23:13.758] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:23:21.537] SBL1:1210.0.1.0 [2025-09-24 13:23:21.569] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:23:23.151] SBL2:1210.0.1.0 [2025-09-24 13:23:23.183] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:23:23.295] j-A [2025-09-24 13:23:30.649] The R5 Autosar Classic is running [2025-09-24 13:23:30.649] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:23:30.670] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:23:31.278] INIT: version 2.96 booting [2025-09-24 13:23:31.390] INIT: Entering runlevel: 5 [2025-09-24 13:23:31.550] mtd28 attached [2025-09-24 13:23:31.566] mtd32 attached [2025-09-24 13:23:31.566] mtd24 attached [2025-09-24 13:23:31.582] ubi0:animations is mounted. [2025-09-24 13:23:31.614] RTNETLINK answers: File exists [2025-09-24 13:23:31.675] ubi2:textures is mounted. [2025-09-24 13:23:31.675] ubi1:dml_code is mounted. [2025-09-24 13:23:31.675] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:23:31.675] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:23:31.675] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:23:31.675] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:23:31.675] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:23:31.675] data.LB_FadeInType0=100 [2025-09-24 13:23:31.675] data.CHLH_FadeInType0=0 [2025-09-24 13:23:31.675] data.WU_FadeInDelay=0 [2025-09-24 13:23:31.675] max_time_out=0 [2025-09-24 13:23:31.675] No splash screen [2025-09-24 13:23:31.675] stop dss Done [2025-09-24 13:23:31.707] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:23:31.723] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:23:31.723] /dev/mem opened. [2025-09-24 13:23:31.755] Memory mapped at address 0xffff81162000. [2025-09-24 13:23:31.755] Read at address 0x00600018 (0xffff81162018): 0x00000000 [2025-09-24 13:23:31.755] Write at address 0x00600018 (0xffff81162018): 0x00400040, readback 0x00400040 [2025-09-24 13:23:31.979] Loaded PowerVR consumer services. [2025-09-24 13:23:32.027] Waiting data available... [2025-09-24 13:23:32.042] 512+0 records in [2025-09-24 13:23:32.042] 512+0 records out [2025-09-24 13:23:32.091] Starting syslogd/klogd: done [2025-09-24 13:23:32.107] DML Start [2025-09-24 13:23:32.282] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:23:32.507] DML res1: 0 [2025-09-24 13:23:32.964] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:23:32.964] Read Success [2025-09-24 13:23:32.964] Verifying certificate... [2025-09-24 13:23:33.236] Verified OK [2025-09-24 13:23:33.252] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:23:35.053] Verified OK [2025-09-24 13:23:35.053] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:23:35.594] Verified OK [2025-09-24 13:23:35.594] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:23:38.009] fs.protected_hardlinks = 1 [2025-09-24 13:23:38.025] fs.protected_symlinks = 1 [2025-09-24 13:23:38.025] kernel.modules_disabled = 1 [2025-09-24 13:23:38.216] [2025-09-24 13:23:38.216] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:23:39.538] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:23:47.274] SBL1:1210.0.1.0 [2025-09-24 13:23:47.322] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:23:48.888] SBL2:1210.0.1.0 [2025-09-24 13:23:48.936] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:23:49.032] j-A [2025-09-24 13:23:56.386] The R5 Autosar Classic is running [2025-09-24 13:23:56.411] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:23:56.411] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:23:57.019] INIT: version 2.96 booting [2025-09-24 13:23:57.131] INIT: Entering runlevel: 5 [2025-09-24 13:23:57.275] mtd32 attached [2025-09-24 13:23:57.291] mtd28 attached [2025-09-24 13:23:57.307] mtd24 attached [2025-09-24 13:23:57.409] RTNETLINK answers: File exists [2025-09-24 13:23:57.409] ubi0:dml_code is mounted. [2025-09-24 13:23:57.409] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:23:57.409] ubi1:animations is mounted. [2025-09-24 13:23:57.409] ubi2:textures is mounted. [2025-09-24 13:23:57.409] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:23:57.409] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:23:57.409] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:23:57.409] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:23:57.409] data.LB_FadeInType0=100 [2025-09-24 13:23:57.409] data.CHLH_FadeInType0=0 [2025-09-24 13:23:57.409] data.WU_FadeInDelay=0 [2025-09-24 13:23:57.409] max_time_out=0 [2025-09-24 13:23:57.409] No splash screen [2025-09-24 13:23:57.409] stop dss Done [2025-09-24 13:23:57.487] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:23:57.487] /dev/mem opened. [2025-09-24 13:23:57.487] Memory mapped at address 0xffff82048000. [2025-09-24 13:23:57.487] Read at address 0x00600018 (0xffff82048018): 0x00000000 [2025-09-24 13:23:57.487] Write at address 0x00600018 (0xffff82048018): 0x00400040, readback 0x00400040 [2025-09-24 13:23:57.487] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:23:57.648] Loaded PowerVR consumer services. [2025-09-24 13:23:57.759] Waiting data available... [2025-09-24 13:23:57.775] 512+0 records in [2025-09-24 13:23:57.792] 512+0 records out [2025-09-24 13:23:57.808] Starting syslogd/klogd: done [2025-09-24 13:23:57.824] DML Start [2025-09-24 13:23:57.983] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:23:58.207] DML res1: 0 [2025-09-24 13:23:58.703] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:23:58.719] Read Success [2025-09-24 13:23:58.719] Verifying certificate... [2025-09-24 13:23:58.959] Verified OK [2025-09-24 13:23:58.975] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:24:00.685] Verified OK [2025-09-24 13:24:00.685] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:24:01.273] Verified OK [2025-09-24 13:24:01.273] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:24:03.751] fs.protected_hardlinks = 1 [2025-09-24 13:24:03.768] fs.protected_symlinks = 1 [2025-09-24 13:24:03.768] kernel.modules_disabled = 1 [2025-09-24 13:24:03.975] [2025-09-24 13:24:03.975] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:24:05.264] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:24:13.008] SBL1:1210.0.1.0 [2025-09-24 13:24:13.056] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:24:14.622] SBL2:1210.0.1.0 [2025-09-24 13:24:14.670] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:24:14.782] j-A [2025-09-24 13:24:22.151] The R5 Autosar Classic is running [2025-09-24 13:24:22.151] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:24:22.151] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:24:22.758] INIT: version 2.96 booting [2025-09-24 13:24:22.870] INIT: Entering runlevel: 5 [2025-09-24 13:24:23.014] mtd24 attached [2025-09-24 13:24:23.029] mtd28 attached [2025-09-24 13:24:23.061] ubi0:textures is mounted. [2025-09-24 13:24:23.077] mtd32 attached [2025-09-24 13:24:23.077] RTNETLINK answers: File exists [2025-09-24 13:24:23.131] ubi1:animations is mounted. [2025-09-24 13:24:23.131] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:24:23.131] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:24:23.131] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:24:23.131] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:24:23.131] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:24:23.131] ubi2:dml_code is mounted. [2025-09-24 13:24:23.162] data.LB_FadeInType0=100 [2025-09-24 13:24:23.162] data.CHLH_FadeInType0=0 [2025-09-24 13:24:23.162] data.WU_FadeInDelay=0 [2025-09-24 13:24:23.162] max_time_out=0 [2025-09-24 13:24:23.162] No splash screen [2025-09-24 13:24:23.162] stop dss Done [2025-09-24 13:24:23.178] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:24:23.194] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:24:23.248] /dev/mem opened. [2025-09-24 13:24:23.248] Memory mapped at address 0xffff9c7e5000. [2025-09-24 13:24:23.248] Read at address 0x00600018 (0xffff9c7e5018): 0x00000000 [2025-09-24 13:24:23.248] Write at address 0x00600018 (0xffff9c7e5018): 0x00400040, readback 0x00400040 [2025-09-24 13:24:23.488] Loaded PowerVR consumer services. [2025-09-24 13:24:23.536] Waiting data available... [2025-09-24 13:24:23.536] 512+0 records in [2025-09-24 13:24:23.552] 512+0 records out [2025-09-24 13:24:23.567] Starting syslogd/klogd: done [2025-09-24 13:24:23.583] DML Start [2025-09-24 13:24:23.792] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:24:24.031] DML res1: 0 [2025-09-24 13:24:24.420] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:24:24.420] Read Success [2025-09-24 13:24:24.420] Verifying certificate... [2025-09-24 13:24:24.645] Verified OK [2025-09-24 13:24:24.677] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:24:26.252] Verified OK [2025-09-24 13:24:26.252] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:24:26.812] Verified OK [2025-09-24 13:24:26.828] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:24:29.482] fs.protected_hardlinks = 1 [2025-09-24 13:24:29.482] fs.protected_symlinks = 1 [2025-09-24 13:24:29.498] kernel.modules_disabled = 1 [2025-09-24 13:24:29.690] [2025-09-24 13:24:29.690] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:24:31.093] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:24:38.764] SBL1:1210.0.1.0 [2025-09-24 13:24:38.796] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:24:40.378] SBL2:1210.0.1.0 [2025-09-24 13:24:40.410] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:24:40.522] j-A [2025-09-24 13:24:47.876] The R5 Autosar Classic is running [2025-09-24 13:24:47.876] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:24:47.897] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:24:48.505] INIT: version 2.96 booting [2025-09-24 13:24:48.616] INIT: Entering runlevel: 5 [2025-09-24 13:24:48.777] mtd28 attached [2025-09-24 13:24:48.777] mtd24 attached [2025-09-24 13:24:48.792] mtd32 attached [2025-09-24 13:24:48.840] ubi0:animations is mounted. [2025-09-24 13:24:48.840] RTNETLINK answers: File exists [2025-09-24 13:24:48.912] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:24:48.912] ubi1:textures is mounted. [2025-09-24 13:24:48.912] ubi2:dml_code is mounted. [2025-09-24 13:24:48.912] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:24:48.912] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:24:48.912] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:24:48.912] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:24:48.912] data.LB_FadeInType0=100 [2025-09-24 13:24:48.912] data.CHLH_FadeInType0=0 [2025-09-24 13:24:48.912] data.WU_FadeInDelay=0 [2025-09-24 13:24:48.912] max_time_out=0 [2025-09-24 13:24:48.912] No splash screen [2025-09-24 13:24:48.912] stop dss Done [2025-09-24 13:24:48.979] /dev/mem opened. [2025-09-24 13:24:48.979] Memory mapped at address 0xffff8665b000. [2025-09-24 13:24:48.979] Read at address 0x00600018 (0xffff8665b018): 0x00000000 [2025-09-24 13:24:48.979] Write at address 0x00600018 (0xffff8665b018): 0x00400040, readback 0x00400040 [2025-09-24 13:24:48.979] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:24:48.995] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:24:49.059] Loaded PowerVR consumer services. [2025-09-24 13:24:49.235] Waiting data available... [2025-09-24 13:24:49.266] 512+0 records in [2025-09-24 13:24:49.266] 512+0 records out [2025-09-24 13:24:49.315] Starting syslogd/klogd: done [2025-09-24 13:24:49.331] DML Start [2025-09-24 13:24:49.507] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:24:49.763] DML res1: 0 [2025-09-24 13:24:50.146] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:24:50.146] Read Success [2025-09-24 13:24:50.162] Verifying certificate... [2025-09-24 13:24:50.386] Verified OK [2025-09-24 13:24:50.402] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:24:52.017] Verified OK [2025-09-24 13:24:52.017] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:24:52.697] Verified OK [2025-09-24 13:24:52.697] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:24:55.351] fs.protected_hardlinks = 1 [2025-09-24 13:24:55.367] fs.protected_symlinks = 1 [2025-09-24 13:24:55.367] kernel.modules_disabled = 1 [2025-09-24 13:24:55.575] [2025-09-24 13:24:55.575] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:24:56.861] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:25:04.516] SBL1:1210.0.1.0 [2025-09-24 13:25:04.548] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:25:06.130] SBL2:1210.0.1.0 [2025-09-24 13:25:06.162] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:25:06.274] j-A [2025-09-24 13:25:13.628] The R5 Autosar Classic is running [2025-09-24 13:25:13.628] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:25:13.649] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:25:14.256] INIT: version 2.96 booting [2025-09-24 13:25:14.368] INIT: Entering runlevel: 5 [2025-09-24 13:25:14.529] mtd32 attached [2025-09-24 13:25:14.529] mtd28 attached [2025-09-24 13:25:14.544] mtd24 attached [2025-09-24 13:25:14.576] ubi0:dml_code is mounted. [2025-09-24 13:25:14.592] RTNETLINK answers: File exists [2025-09-24 13:25:14.625] ubi1:animations is mounted. [2025-09-24 13:25:14.625] ubi2:textures is mounted. [2025-09-24 13:25:14.625] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:25:14.625] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:25:14.625] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:25:14.625] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:25:14.657] data.LB_FadeInType0=100 [2025-09-24 13:25:14.657] data.CHLH_FadeInType0=0 [2025-09-24 13:25:14.657] data.WU_FadeInDelay=0 [2025-09-24 13:25:14.657] max_time_out=0 [2025-09-24 13:25:14.657] No splash screen [2025-09-24 13:25:14.657] stop dss Done [2025-09-24 13:25:14.657] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:25:14.689] /dev/mem opened. [2025-09-24 13:25:14.726] Memory mapped at address 0xffffb0dec000. [2025-09-24 13:25:14.726] Read at address 0x00600018 (0xffffb0dec018): 0x00000000 [2025-09-24 13:25:14.726] Write at address 0x00600018 (0xffffb0dec018): 0x00400040, readback 0x00400040 [2025-09-24 13:25:14.726] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:25:14.726] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:25:14.822] Loaded PowerVR consumer services. [2025-09-24 13:25:14.998] Waiting data available... [2025-09-24 13:25:15.014] 512+0 records in [2025-09-24 13:25:15.014] 512+0 records out [2025-09-24 13:25:15.046] Starting syslogd/klogd: done [2025-09-24 13:25:15.061] DML Start [2025-09-24 13:25:15.238] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:25:15.445] DML res1: 0 [2025-09-24 13:25:15.893] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:25:15.914] Read Success [2025-09-24 13:25:15.914] Verifying certificate... [2025-09-24 13:25:16.186] Verified OK [2025-09-24 13:25:16.202] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:25:17.876] Verified OK [2025-09-24 13:25:17.876] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:25:18.514] Verified OK [2025-09-24 13:25:18.535] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:25:21.094] fs.protected_hardlinks = 1 [2025-09-24 13:25:21.110] fs.protected_symlinks = 1 [2025-09-24 13:25:21.126] kernel.modules_disabled = 1 [2025-09-24 13:25:21.302] [2025-09-24 13:25:21.302] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:25:22.490] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:25:30.272] SBL1:1210.0.1.0 [2025-09-24 13:25:30.304] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:25:31.886] SBL2:1210.0.1.0 [2025-09-24 13:25:31.918] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:25:32.031] j-A [2025-09-24 13:25:39.384] The R5 Autosar Classic is running [2025-09-24 13:25:39.384] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:25:39.405] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:25:40.013] INIT: version 2.96 booting [2025-09-24 13:25:40.124] INIT: Entering runlevel: 5 [2025-09-24 13:25:40.285] mtd28 attached [2025-09-24 13:25:40.285] mtd24 attached [2025-09-24 13:25:40.301] mtd32 attached [2025-09-24 13:25:40.417] RTNETLINK answers: File exists [2025-09-24 13:25:40.417] ubi1:textures is mounted. [2025-09-24 13:25:40.417] ubi0:animations is mounted. [2025-09-24 13:25:40.417] ubi2:dml_code is mounted. [2025-09-24 13:25:40.417] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:25:40.417] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:25:40.417] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:25:40.417] data.LB_FadeInType0=100 [2025-09-24 13:25:40.417] data.CHLH_FadeInType0=0 [2025-09-24 13:25:40.417] data.WU_FadeInDelay=0 [2025-09-24 13:25:40.417] max_time_out=0 [2025-09-24 13:25:40.417] No splash screen [2025-09-24 13:25:40.417] stop dss Done [2025-09-24 13:25:40.417] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:25:40.417] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:25:40.481] /dev/mem opened. [2025-09-24 13:25:40.481] Memory mapped at address 0xffffb1986000. [2025-09-24 13:25:40.481] Read at address 0x00600018 (0xffffb1986018): 0x00000000 [2025-09-24 13:25:40.481] Write at address 0x00600018 (0xffffb1986018): 0x00400040, readback 0x00400040 [2025-09-24 13:25:40.497] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:25:40.513] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:25:40.721] Loaded PowerVR consumer services. [2025-09-24 13:25:40.737] Waiting data available... [2025-09-24 13:25:40.769] 512+0 records in [2025-09-24 13:25:40.769] 512+0 records out [2025-09-24 13:25:40.801] Starting syslogd/klogd: done [2025-09-24 13:25:40.817] DML Start [2025-09-24 13:25:41.009] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:25:41.233] DML res1: 0 [2025-09-24 13:25:41.632] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:25:41.653] Read Success [2025-09-24 13:25:41.653] Verifying certificate... [2025-09-24 13:25:41.909] Verified OK [2025-09-24 13:25:41.925] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:25:43.683] Verified OK [2025-09-24 13:25:43.683] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:25:44.286] Verified OK [2025-09-24 13:25:44.286] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:25:46.827] fs.protected_hardlinks = 1 [2025-09-24 13:25:46.843] fs.protected_symlinks = 1 [2025-09-24 13:25:46.843] kernel.modules_disabled = 1 [2025-09-24 13:25:47.035] [2025-09-24 13:25:47.035] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:25:48.281] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:25:56.026] SBL1:1210.0.1.0 [2025-09-24 13:25:56.074] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:25:57.641] SBL2:1210.0.1.0 [2025-09-24 13:25:57.689] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:25:57.784] j-A [2025-09-24 13:26:05.138] The R5 Autosar Classic is running [2025-09-24 13:26:05.161] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:26:05.161] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:26:05.769] INIT: version 2.96 booting [2025-09-24 13:26:05.880] INIT: Entering runlevel: 5 [2025-09-24 13:26:06.041] mtd24 attached [2025-09-24 13:26:06.041] mtd32 attached [2025-09-24 13:26:06.057] mtd28 attached [2025-09-24 13:26:06.105] RTNETLINK answers: File exists [2025-09-24 13:26:06.172] ubi1:dml_code is mounted. [2025-09-24 13:26:06.172] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:26:06.172] ubi0:textures is mounted. [2025-09-24 13:26:06.172] ubi2:animations is mounted. [2025-09-24 13:26:06.172] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:26:06.172] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:26:06.172] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:26:06.172] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:26:06.172] data.LB_FadeInType0=100 [2025-09-24 13:26:06.172] data.CHLH_FadeInType0=0 [2025-09-24 13:26:06.172] data.WU_FadeInDelay=0 [2025-09-24 13:26:06.172] max_time_out=0 [2025-09-24 13:26:06.172] No splash screen [2025-09-24 13:26:06.172] stop dss Done [2025-09-24 13:26:06.204] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:26:06.239] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:26:06.239] /dev/mem opened. [2025-09-24 13:26:06.239] Memory mapped at address 0xffffb0def000. [2025-09-24 13:26:06.239] Read at address 0x00600018 (0xffffb0def018): 0x00000000 [2025-09-24 13:26:06.239] Write at address 0x00600018 (0xffffb0def018): 0x00400040, readback 0x00400040 [2025-09-24 13:26:06.399] Loaded PowerVR consumer services. [2025-09-24 13:26:06.511] Waiting data available... [2025-09-24 13:26:06.527] 512+0 records in [2025-09-24 13:26:06.527] 512+0 records out [2025-09-24 13:26:06.543] Starting syslogd/klogd: done [2025-09-24 13:26:06.576] DML Start [2025-09-24 13:26:06.719] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:26:06.959] DML res1: 0 [2025-09-24 13:26:07.382] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:26:07.382] Read Success [2025-09-24 13:26:07.382] Verifying certificate... [2025-09-24 13:26:07.621] Verified OK [2025-09-24 13:26:07.637] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:26:09.316] Verified OK [2025-09-24 13:26:09.316] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:26:09.936] Verified OK [2025-09-24 13:26:09.936] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:26:12.637] fs.protected_hardlinks = 1 [2025-09-24 13:26:12.653] fs.protected_symlinks = 1 [2025-09-24 13:26:12.653] kernel.modules_disabled = 1 [2025-09-24 13:26:12.846] [2025-09-24 13:26:12.846] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:26:14.004] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:26:21.761] SBL1:1210.0.1.0 [2025-09-24 13:26:21.793] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:26:23.375] SBL2:1210.0.1.0 [2025-09-24 13:26:23.423] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:26:23.519] j-A [2025-09-24 13:26:30.874] The R5 Autosar Classic is running [2025-09-24 13:26:30.874] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:26:30.895] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:26:31.502] INIT: version 2.96 booting [2025-09-24 13:26:31.614] INIT: Entering runlevel: 5 [2025-09-24 13:26:31.774] mtd32 attached [2025-09-24 13:26:31.790] mtd28 attached [2025-09-24 13:26:31.790] mtd24 attached [2025-09-24 13:26:31.838] RTNETLINK answers: File exists [2025-09-24 13:26:31.901] ubi0:dml_code is mounted. [2025-09-24 13:26:31.901] ubi1:animations is mounted. [2025-09-24 13:26:31.901] ubi2:textures is mounted. [2025-09-24 13:26:31.901] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:26:31.901] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:26:31.901] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:26:31.901] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:26:31.901] data.LB_FadeInType0=100 [2025-09-24 13:26:31.901] data.CHLH_FadeInType0=0 [2025-09-24 13:26:31.901] data.WU_FadeInDelay=0 [2025-09-24 13:26:31.901] max_time_out=0 [2025-09-24 13:26:31.901] No splash screen [2025-09-24 13:26:31.901] stop dss Done [2025-09-24 13:26:31.901] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:26:31.980] /dev/mem opened. [2025-09-24 13:26:31.980] Memory mapped at address 0xffffbf491000. [2025-09-24 13:26:31.980] Read at address 0x00600018 (0xffffbf491018): 0x00000000 [2025-09-24 13:26:31.980] Write at address 0x00600018 (0xffffbf491018): 0x00400040, readback 0x00400040 [2025-09-24 13:26:31.980] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:26:31.980] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:26:32.044] Loaded PowerVR consumer services. [2025-09-24 13:26:32.236] Waiting data available... [2025-09-24 13:26:32.267] 512+0 records in [2025-09-24 13:26:32.267] 512+0 records out [2025-09-24 13:26:32.299] Starting syslogd/klogd: done [2025-09-24 13:26:32.315] DML Start [2025-09-24 13:26:32.507] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:26:32.699] DML res1: 0 [2025-09-24 13:26:33.163] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:26:33.179] Read Success [2025-09-24 13:26:33.179] Verifying certificate... [2025-09-24 13:26:33.402] Verified OK [2025-09-24 13:26:33.418] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:26:35.207] Verified OK [2025-09-24 13:26:35.207] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:26:35.793] Verified OK [2025-09-24 13:26:35.793] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:26:38.351] fs.protected_hardlinks = 1 [2025-09-24 13:26:38.351] fs.protected_symlinks = 1 [2025-09-24 13:26:38.351] kernel.modules_disabled = 1 [2025-09-24 13:26:38.559] [2025-09-24 13:26:38.559] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:26:39.765] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:26:47.512] SBL1:1210.0.1.0 [2025-09-24 13:26:47.544] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:26:49.127] SBL2:1210.0.1.0 [2025-09-24 13:26:49.159] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:26:49.271] j-A [2025-09-24 13:26:56.643] The R5 Autosar Classic is running [2025-09-24 13:26:56.643] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:26:56.643] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:26:57.250] INIT: version 2.96 booting [2025-09-24 13:26:57.362] INIT: Entering runlevel: 5 [2025-09-24 13:26:57.506] mtd24 attached [2025-09-24 13:26:57.521] mtd32 attached [2025-09-24 13:26:57.537] mtd28 attached [2025-09-24 13:26:57.569] ubi0:textures is mounted. [2025-09-24 13:26:57.585] ubi1:dml_code is mounted. [2025-09-24 13:26:57.585] ubi2:animations is mounted. [2025-09-24 13:26:57.636] RTNETLINK answers: File exists [2025-09-24 13:26:57.636] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:26:57.636] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:26:57.636] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:26:57.636] data.LB_FadeInType0=100 [2025-09-24 13:26:57.636] data.CHLH_FadeInType0=0 [2025-09-24 13:26:57.636] data.WU_FadeInDelay=0 [2025-09-24 13:26:57.636] max_time_out=0 [2025-09-24 13:26:57.636] No splash screen [2025-09-24 13:26:57.636] stop dss Done [2025-09-24 13:26:57.636] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:26:57.636] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:26:57.702] /dev/mem opened. [2025-09-24 13:26:57.702] Memory mapped at address 0xffffa8d6e000. [2025-09-24 13:26:57.702] Read at address 0x00600018 (0xffffa8d6e018): 0x00000000 [2025-09-24 13:26:57.702] Write at address 0x00600018 (0xffffa8d6e018): 0x00400040, readback 0x00400040 [2025-09-24 13:26:57.734] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:26:57.750] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:26:57.797] Loaded PowerVR consumer services. [2025-09-24 13:26:57.974] Waiting data available... [2025-09-24 13:26:57.990] 512+0 records in [2025-09-24 13:26:58.006] 512+0 records out [2025-09-24 13:26:58.022] Starting syslogd/klogd: done [2025-09-24 13:26:58.054] DML Start [2025-09-24 13:26:58.197] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:26:58.389] DML res1: 0 [2025-09-24 13:26:58.891] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:26:58.891] Read Success [2025-09-24 13:26:58.891] Verifying certificate... [2025-09-24 13:26:59.147] Verified OK [2025-09-24 13:26:59.179] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:27:00.867] Verified OK [2025-09-24 13:27:00.867] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:27:01.442] Verified OK [2025-09-24 13:27:01.442] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:27:04.128] fs.protected_hardlinks = 1 [2025-09-24 13:27:04.144] fs.protected_symlinks = 1 [2025-09-24 13:27:04.144] kernel.modules_disabled = 1 [2025-09-24 13:27:04.351] [2025-09-24 13:27:04.351] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:27:05.535] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:27:13.246] SBL1:1210.0.1.0 [2025-09-24 13:27:13.294] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:27:14.877] SBL2:1210.0.1.0 [2025-09-24 13:27:14.909] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:27:15.021] j-A [2025-09-24 13:27:22.392] The R5 Autosar Classic is running [2025-09-24 13:27:22.392] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:27:22.392] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:27:22.999] INIT: version 2.96 booting [2025-09-24 13:27:23.111] INIT: Entering runlevel: 5 [2025-09-24 13:27:23.270] mtd28 attached [2025-09-24 13:27:23.270] mtd24 attached [2025-09-24 13:27:23.286] mtd32 attached [2025-09-24 13:27:23.334] ubi1:textures is mounted. [2025-09-24 13:27:23.334] RTNETLINK answers: File exists [2025-09-24 13:27:23.334] ubi0:animations is mounted. [2025-09-24 13:27:23.379] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:27:23.379] ubi2:dml_code is mounted. [2025-09-24 13:27:23.379] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:27:23.379] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:27:23.379] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:27:23.379] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:27:23.400] data.LB_FadeInType0=100 [2025-09-24 13:27:23.400] data.CHLH_FadeInType0=0 [2025-09-24 13:27:23.400] data.WU_FadeInDelay=0 [2025-09-24 13:27:23.400] max_time_out=0 [2025-09-24 13:27:23.400] No splash screen [2025-09-24 13:27:23.400] stop dss Done [2025-09-24 13:27:23.484] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:27:23.484] /dev/mem opened. [2025-09-24 13:27:23.484] Memory mapped at address 0xffff9f588000. [2025-09-24 13:27:23.484] Read at address 0x00600018 (0xffff9f588018): 0x00000000 [2025-09-24 13:27:23.484] Write at address 0x00600018 (0xffff9f588018): 0x00400040, readback 0x00400040 [2025-09-24 13:27:23.484] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:27:23.548] Loaded PowerVR consumer services. [2025-09-24 13:27:23.741] Waiting data available... [2025-09-24 13:27:23.756] 512+0 records in [2025-09-24 13:27:23.756] 512+0 records out [2025-09-24 13:27:23.804] Starting syslogd/klogd: done [2025-09-24 13:27:23.820] DML Start [2025-09-24 13:27:24.028] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:27:24.236] DML res1: 0 [2025-09-24 13:27:24.699] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:27:24.720] Read Success [2025-09-24 13:27:24.720] Verifying certificate... [2025-09-24 13:27:25.008] Verified OK [2025-09-24 13:27:25.024] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:27:26.654] Verified OK [2025-09-24 13:27:26.654] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:27:27.278] Verified OK [2025-09-24 13:27:27.278] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:27:29.852] fs.protected_hardlinks = 1 [2025-09-24 13:27:29.867] fs.protected_symlinks = 1 [2025-09-24 13:27:29.868] kernel.modules_disabled = 1 [2025-09-24 13:27:30.060] [2025-09-24 13:27:30.060] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:27:31.234] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:27:38.992] SBL1:1210.0.1.0 [2025-09-24 13:27:39.040] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:27:40.607] SBL2:1210.0.1.0 [2025-09-24 13:27:40.654] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:27:40.767] j-A [2025-09-24 13:27:48.105] The R5 Autosar Classic is running [2025-09-24 13:27:48.136] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:27:48.136] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:27:48.744] INIT: version 2.96 booting [2025-09-24 13:27:48.856] INIT: Entering runlevel: 5 [2025-09-24 13:27:48.999] mtd24 attached [2025-09-24 13:27:49.015] mtd28 attached [2025-09-24 13:27:49.048] ubi0:textures is mounted. [2025-09-24 13:27:49.048] mtd32 attached [2025-09-24 13:27:49.080] ubi1:animations is mounted. [2025-09-24 13:27:49.080] RTNETLINK answers: File exists [2025-09-24 13:27:49.138] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:27:49.138] ubi2:dml_code is mounted. [2025-09-24 13:27:49.138] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:27:49.138] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:27:49.138] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:27:49.138] data.LB_FadeInType0=100 [2025-09-24 13:27:49.138] data.CHLH_FadeInType0=0 [2025-09-24 13:27:49.138] data.WU_FadeInDelay=0 [2025-09-24 13:27:49.138] max_time_out=0 [2025-09-24 13:27:49.138] No splash screen [2025-09-24 13:27:49.138] stop dss Done [2025-09-24 13:27:49.138] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:27:49.210] /dev/mem opened. [2025-09-24 13:27:49.210] Memory mapped at address 0xffffaf567000. [2025-09-24 13:27:49.210] Read at address 0x00600018 (0xffffaf567018): 0x00000000 [2025-09-24 13:27:49.210] Write at address 0x00600018 (0xffffaf567018): 0x00400040, readback 0x00400040 [2025-09-24 13:27:49.210] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:27:49.226] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:27:49.481] Loaded PowerVR consumer services. [2025-09-24 13:27:49.497] Waiting data available... [2025-09-24 13:27:49.529] 512+0 records in [2025-09-24 13:27:49.529] 512+0 records out [2025-09-24 13:27:49.561] Starting syslogd/klogd: done [2025-09-24 13:27:49.577] DML Start [2025-09-24 13:27:49.769] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:27:49.993] DML res1: 0 [2025-09-24 13:27:50.391] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:27:50.391] Read Success [2025-09-24 13:27:50.391] Verifying certificate... [2025-09-24 13:27:50.632] Verified OK [2025-09-24 13:27:50.647] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:27:52.385] Verified OK [2025-09-24 13:27:52.385] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:27:53.014] Verified OK [2025-09-24 13:27:53.014] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:27:55.620] fs.protected_hardlinks = 1 [2025-09-24 13:27:55.636] fs.protected_symlinks = 1 [2025-09-24 13:27:55.636] kernel.modules_disabled = 1 [2025-09-24 13:27:55.844] [2025-09-24 13:27:55.844] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:27:57.019] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:28:04.717] SBL1:1210.0.1.0 [2025-09-24 13:28:04.765] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:28:06.331] SBL2:1210.0.1.0 [2025-09-24 13:28:06.379] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:28:06.491] j-A [2025-09-24 13:28:13.829] The R5 Autosar Classic is running [2025-09-24 13:28:13.860] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:28:13.860] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:28:14.468] INIT: version 2.96 booting [2025-09-24 13:28:14.581] INIT: Entering runlevel: 5 [2025-09-24 13:28:14.724] mtd28 attached [2025-09-24 13:28:14.740] mtd24 attached [2025-09-24 13:28:14.756] mtd32 attached [2025-09-24 13:28:14.860] RTNETLINK answers: File exists [2025-09-24 13:28:14.860] ubi0:animations is mounted. [2025-09-24 13:28:14.860] ubi1:textures is mounted. [2025-09-24 13:28:14.860] ubi2:dml_code is mounted. [2025-09-24 13:28:14.860] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:28:14.860] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:28:14.860] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:28:14.860] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:28:14.860] data.LB_FadeInType0=100 [2025-09-24 13:28:14.860] data.CHLH_FadeInType0=0 [2025-09-24 13:28:14.860] data.WU_FadeInDelay=0 [2025-09-24 13:28:14.860] max_time_out=0 [2025-09-24 13:28:14.860] No splash screen [2025-09-24 13:28:14.860] stop dss Done [2025-09-24 13:28:14.860] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:28:14.940] /dev/mem opened. [2025-09-24 13:28:14.940] Memory mapped at address 0xffffa30fc000. [2025-09-24 13:28:14.940] Read at address 0x00600018 (0xffffa30fc018): 0x00000000 [2025-09-24 13:28:14.940] Write at address 0x00600018 (0xffffa30fc018): 0x00400040, readback 0x00400040 [2025-09-24 13:28:14.971] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:28:14.971] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:28:15.195] Loaded PowerVR consumer services. [2025-09-24 13:28:15.211] Waiting data available... [2025-09-24 13:28:15.227] 512+0 records in [2025-09-24 13:28:15.227] 512+0 records out [2025-09-24 13:28:15.275] Starting syslogd/klogd: done [2025-09-24 13:28:15.291] DML Start [2025-09-24 13:28:15.467] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:28:15.691] DML res1: 0 [2025-09-24 13:28:16.134] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:28:16.134] Read Success [2025-09-24 13:28:16.134] Verifying certificate... [2025-09-24 13:28:16.390] Verified OK [2025-09-24 13:28:16.406] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:28:18.037] Verified OK [2025-09-24 13:28:18.053] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:28:18.661] Verified OK [2025-09-24 13:28:18.661] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:28:21.378] fs.protected_hardlinks = 1 [2025-09-24 13:28:21.394] fs.protected_symlinks = 1 [2025-09-24 13:28:21.394] kernel.modules_disabled = 1 [2025-09-24 13:28:21.585] [2025-09-24 13:28:21.585] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:28:22.717] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:28:30.479] SBL1:1210.0.1.0 [2025-09-24 13:28:30.511] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:28:32.093] SBL2:1210.0.1.0 [2025-09-24 13:28:32.125] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:28:32.237] j-A [2025-09-24 13:28:39.611] The R5 Autosar Classic is running [2025-09-24 13:28:39.611] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:28:39.611] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:28:40.219] INIT: version 2.96 booting [2025-09-24 13:28:40.330] INIT: Entering runlevel: 5 [2025-09-24 13:28:40.490] mtd28 attached [2025-09-24 13:28:40.490] mtd32 attached [2025-09-24 13:28:40.506] mtd24 attached [2025-09-24 13:28:40.554] ubi0:animations is mounted. [2025-09-24 13:28:40.554] RTNETLINK answers: File exists [2025-09-24 13:28:40.619] ubi2:textures is mounted. [2025-09-24 13:28:40.619] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:28:40.619] ubi1:dml_code is mounted. [2025-09-24 13:28:40.619] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:28:40.619] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:28:40.619] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:28:40.619] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:28:40.619] data.LB_FadeInType0=100 [2025-09-24 13:28:40.619] data.CHLH_FadeInType0=0 [2025-09-24 13:28:40.619] data.WU_FadeInDelay=0 [2025-09-24 13:28:40.619] max_time_out=0 [2025-09-24 13:28:40.619] No splash screen [2025-09-24 13:28:40.619] stop dss Done [2025-09-24 13:28:40.660] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:28:40.660] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:28:40.695] /dev/mem opened. [2025-09-24 13:28:40.695] Memory mapped at address 0xffffbbd34000. [2025-09-24 13:28:40.695] Read at address 0x00600018 (0xffffbbd34018): 0x00000000 [2025-09-24 13:28:40.695] Write at address 0x00600018 (0xffffbbd34018): 0x00400040, readback 0x00400040 [2025-09-24 13:28:40.948] Loaded PowerVR consumer services. [2025-09-24 13:28:40.948] Waiting data available... [2025-09-24 13:28:40.964] 512+0 records in [2025-09-24 13:28:40.964] 512+0 records out [2025-09-24 13:28:41.029] Starting syslogd/klogd: done [2025-09-24 13:28:41.044] DML Start [2025-09-24 13:28:41.188] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:28:41.396] DML res1: 0 [2025-09-24 13:28:41.947] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:28:41.947] Read Success [2025-09-24 13:28:41.947] Verifying certificate... [2025-09-24 13:28:42.170] Verified OK [2025-09-24 13:28:42.186] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:28:43.769] Verified OK [2025-09-24 13:28:43.769] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:28:44.464] Verified OK [2025-09-24 13:28:44.464] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:28:47.086] fs.protected_hardlinks = 1 [2025-09-24 13:28:47.103] fs.protected_symlinks = 1 [2025-09-24 13:28:47.103] kernel.modules_disabled = 1 [2025-09-24 13:28:47.310] [2025-09-24 13:28:47.310] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:28:48.455] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:28:56.197] SBL1:1210.0.1.0 [2025-09-24 13:28:56.245] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:28:57.811] SBL2:1210.0.1.0 [2025-09-24 13:28:57.859] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:28:57.971] j-A [2025-09-24 13:29:05.342] The R5 Autosar Classic is running [2025-09-24 13:29:05.342] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:29:05.342] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:29:05.949] INIT: version 2.96 booting [2025-09-24 13:29:06.061] INIT: Entering runlevel: 5 [2025-09-24 13:29:06.220] mtd32 attached [2025-09-24 13:29:06.220] mtd24 attached [2025-09-24 13:29:06.236] mtd28 attached [2025-09-24 13:29:06.285] ubi0:dml_code is mounted. [2025-09-24 13:29:06.285] RTNETLINK answers: File exists [2025-09-24 13:29:06.325] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:29:06.325] ubi1:textures is mounted. [2025-09-24 13:29:06.325] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:29:06.325] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:29:06.325] ubi2:animations is mounted. [2025-09-24 13:29:06.325] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:29:06.325] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:29:06.347] data.LB_FadeInType0=100 [2025-09-24 13:29:06.347] data.CHLH_FadeInType0=0 [2025-09-24 13:29:06.347] data.WU_FadeInDelay=0 [2025-09-24 13:29:06.347] max_time_out=0 [2025-09-24 13:29:06.347] No splash screen [2025-09-24 13:29:06.347] stop dss Done [2025-09-24 13:29:06.395] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:29:06.395] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:29:06.426] /dev/mem opened. [2025-09-24 13:29:06.426] Memory mapped at address 0xffffa6fa3000. [2025-09-24 13:29:06.426] Read at address 0x00600018 (0xffffa6fa3018): 0x00000000 [2025-09-24 13:29:06.426] Write at address 0x00600018 (0xffffa6fa3018): 0x00400040, readback 0x00400040 [2025-09-24 13:29:06.571] Loaded PowerVR consumer services. [2025-09-24 13:29:06.715] Waiting data available... [2025-09-24 13:29:06.730] 512+0 records in [2025-09-24 13:29:06.730] 512+0 records out [2025-09-24 13:29:06.778] Starting syslogd/klogd: done [2025-09-24 13:29:06.778] DML Start [2025-09-24 13:29:06.922] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:29:07.099] DML res1: 0 [2025-09-24 13:29:07.654] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:29:07.654] Read Success [2025-09-24 13:29:07.654] Verifying certificate... [2025-09-24 13:29:07.910] Verified OK [2025-09-24 13:29:07.926] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:29:09.588] Verified OK [2025-09-24 13:29:09.604] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:29:10.130] Verified OK [2025-09-24 13:29:10.130] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:29:12.672] fs.protected_hardlinks = 1 [2025-09-24 13:29:12.688] fs.protected_symlinks = 1 [2025-09-24 13:29:12.704] kernel.modules_disabled = 1 [2025-09-24 13:29:12.897] [2025-09-24 13:29:12.897] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:29:14.290] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:29:21.952] SBL1:1210.0.1.0 [2025-09-24 13:29:22.000] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:29:23.566] SBL2:1210.0.1.0 [2025-09-24 13:29:23.614] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:29:23.710] j-A [2025-09-24 13:29:31.065] The R5 Autosar Classic is running [2025-09-24 13:29:31.089] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:29:31.089] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:29:31.696] INIT: version 2.96 booting [2025-09-24 13:29:31.808] INIT: Entering runlevel: 5 [2025-09-24 13:29:31.952] mtd28 attached [2025-09-24 13:29:31.968] mtd32 attached [2025-09-24 13:29:31.984] mtd24 attached [2025-09-24 13:29:32.016] ubi0:animations is mounted. [2025-09-24 13:29:32.032] RTNETLINK answers: File exists [2025-09-24 13:29:32.032] ubi1:dml_code is mounted. [2025-09-24 13:29:32.092] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:29:32.092] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:29:32.092] ubi2:textures is mounted. [2025-09-24 13:29:32.092] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:29:32.092] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:29:32.092] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:29:32.092] data.LB_FadeInType0=100 [2025-09-24 13:29:32.092] data.CHLH_FadeInType0=0 [2025-09-24 13:29:32.092] data.WU_FadeInDelay=0 [2025-09-24 13:29:32.092] max_time_out=0 [2025-09-24 13:29:32.092] No splash screen [2025-09-24 13:29:32.092] stop dss Done [2025-09-24 13:29:32.166] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:29:32.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:29:32.166] /dev/mem opened. [2025-09-24 13:29:32.166] Memory mapped at address 0xffff97139000. [2025-09-24 13:29:32.166] Read at address 0x00600018 (0xffff97139018): 0x00000000 [2025-09-24 13:29:32.166] Write at address 0x00600018 (0xffff97139018): 0x00400040, readback 0x00400040 [2025-09-24 13:29:32.309] Loaded PowerVR consumer services. [2025-09-24 13:29:32.453] Waiting data available... [2025-09-24 13:29:32.469] 512+0 records in [2025-09-24 13:29:32.469] 512+0 records out [2025-09-24 13:29:32.517] Starting syslogd/klogd: done [2025-09-24 13:29:32.517] DML Start [2025-09-24 13:29:32.693] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:29:32.853] DML res1: 0 [2025-09-24 13:29:33.391] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:29:33.391] Read Success [2025-09-24 13:29:33.391] Verifying certificate... [2025-09-24 13:29:33.664] Verified OK [2025-09-24 13:29:33.680] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:29:35.357] Verified OK [2025-09-24 13:29:35.357] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:29:35.949] Verified OK [2025-09-24 13:29:35.970] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:29:38.545] fs.protected_hardlinks = 1 [2025-09-24 13:29:38.545] fs.protected_symlinks = 1 [2025-09-24 13:29:38.560] kernel.modules_disabled = 1 [2025-09-24 13:29:38.752] [2025-09-24 13:29:38.752] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:29:39.937] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:29:47.666] SBL1:1210.0.1.0 [2025-09-24 13:29:47.714] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:29:49.280] SBL2:1210.0.1.0 [2025-09-24 13:29:49.328] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:29:49.441] j-A [2025-09-24 13:29:56.811] The R5 Autosar Classic is running [2025-09-24 13:29:56.811] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:29:56.811] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:29:57.418] INIT: version 2.96 booting [2025-09-24 13:29:57.531] INIT: Entering runlevel: 5 [2025-09-24 13:29:57.690] mtd32 attached [2025-09-24 13:29:57.690] mtd24 attached [2025-09-24 13:29:57.706] mtd28 attached [2025-09-24 13:29:57.754] ubi0:dml_code is mounted. [2025-09-24 13:29:57.754] RTNETLINK answers: File exists [2025-09-24 13:29:57.813] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:29:57.813] ubi2:animations is mounted. [2025-09-24 13:29:57.813] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:29:57.813] ubi1:textures is mounted. [2025-09-24 13:29:57.813] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:29:57.813] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:29:57.813] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:29:57.813] data.LB_FadeInType0=100 [2025-09-24 13:29:57.813] data.CHLH_FadeInType0=0 [2025-09-24 13:29:57.813] data.WU_FadeInDelay=0 [2025-09-24 13:29:57.813] max_time_out=0 [2025-09-24 13:29:57.813] No splash screen [2025-09-24 13:29:57.813] stop dss Done [2025-09-24 13:29:57.845] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:29:57.882] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:29:57.882] /dev/mem opened. [2025-09-24 13:29:57.882] Memory mapped at address 0xffffaf404000. [2025-09-24 13:29:57.882] Read at address 0x00600018 (0xffffaf404018): 0x00000000 [2025-09-24 13:29:57.882] Write at address 0x00600018 (0xffffaf404018): 0x00400040, readback 0x00400040 [2025-09-24 13:29:58.027] Loaded PowerVR consumer services. [2025-09-24 13:29:58.154] Waiting data available... [2025-09-24 13:29:58.170] 512+0 records in [2025-09-24 13:29:58.170] 512+0 records out [2025-09-24 13:29:58.202] Starting syslogd/klogd: done [2025-09-24 13:29:58.218] DML Start [2025-09-24 13:29:58.426] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:29:58.666] DML res1: 0 [2025-09-24 13:29:59.049] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:29:59.065] Read Success [2025-09-24 13:29:59.065] Verifying certificate... [2025-09-24 13:29:59.369] Verified OK [2025-09-24 13:29:59.385] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:30:00.977] Verified OK [2025-09-24 13:30:00.977] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:30:01.609] Verified OK [2025-09-24 13:30:01.609] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:30:04.183] fs.protected_hardlinks = 1 [2025-09-24 13:30:04.183] fs.protected_symlinks = 1 [2025-09-24 13:30:04.199] kernel.modules_disabled = 1 [2025-09-24 13:30:04.391] [2025-09-24 13:30:04.391] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:30:05.675] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:30:13.390] SBL1:1210.0.1.0 [2025-09-24 13:30:13.438] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:30:15.005] SBL2:1210.0.1.0 [2025-09-24 13:30:15.053] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:30:15.150] j-A [2025-09-24 13:30:22.503] The R5 Autosar Classic is running [2025-09-24 13:30:22.503] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:30:22.524] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:30:23.131] INIT: version 2.96 booting [2025-09-24 13:30:23.243] INIT: Entering runlevel: 5 [2025-09-24 13:30:23.387] mtd28 attached [2025-09-24 13:30:23.403] mtd24 attached [2025-09-24 13:30:23.419] mtd32 attached [2025-09-24 13:30:23.520] RTNETLINK answers: File exists [2025-09-24 13:30:23.520] ubi0:animations is mounted. [2025-09-24 13:30:23.520] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:30:23.520] ubi1:textures is mounted. [2025-09-24 13:30:23.520] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:30:23.520] ubi2:dml_code is mounted. [2025-09-24 13:30:23.520] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:30:23.520] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:30:23.520] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:30:23.520] data.LB_FadeInType0=100 [2025-09-24 13:30:23.520] data.CHLH_FadeInType0=0 [2025-09-24 13:30:23.520] data.WU_FadeInDelay=0 [2025-09-24 13:30:23.520] max_time_out=0 [2025-09-24 13:30:23.520] No splash screen [2025-09-24 13:30:23.520] stop dss Done [2025-09-24 13:30:23.567] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:30:23.567] /dev/mem opened. [2025-09-24 13:30:23.600] Memory mapped at address 0xffff9d232000. [2025-09-24 13:30:23.600] Read at address 0x00600018 (0xffff9d232018): 0x00000000 [2025-09-24 13:30:23.600] Write at address 0x00600018 (0xffff9d232018): 0x00400040, readback 0x00400040 [2025-09-24 13:30:23.600] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:30:23.680] Loaded PowerVR consumer services. [2025-09-24 13:30:23.856] Waiting data available... [2025-09-24 13:30:23.888] 512+0 records in [2025-09-24 13:30:23.888] 512+0 records out [2025-09-24 13:30:23.920] Starting syslogd/klogd: done [2025-09-24 13:30:23.936] DML Start [2025-09-24 13:30:24.143] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:30:24.351] DML res1: 0 [2025-09-24 13:30:24.810] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:30:24.810] Read Success [2025-09-24 13:30:24.810] Verifying certificate... [2025-09-24 13:30:25.082] Verified OK [2025-09-24 13:30:25.098] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:30:26.822] Verified OK [2025-09-24 13:30:26.822] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:30:27.383] Verified OK [2025-09-24 13:30:27.383] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:30:29.860] fs.protected_hardlinks = 1 [2025-09-24 13:30:29.860] fs.protected_symlinks = 1 [2025-09-24 13:30:29.876] kernel.modules_disabled = 1 [2025-09-24 13:30:30.069] [2025-09-24 13:30:30.069] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:30:31.359] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:30:39.121] SBL1:1210.0.1.0 [2025-09-24 13:30:39.169] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:30:40.736] SBL2:1210.0.1.0 [2025-09-24 13:30:40.784] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:30:40.880] j-A [2025-09-24 13:30:48.233] The R5 Autosar Classic is running [2025-09-24 13:30:48.257] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:30:48.257] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:30:48.865] INIT: version 2.96 booting [2025-09-24 13:30:48.977] INIT: Entering runlevel: 5 [2025-09-24 13:30:49.136] mtd24 attached [2025-09-24 13:30:49.136] mtd28 attached [2025-09-24 13:30:49.152] mtd32 attached [2025-09-24 13:30:49.200] RTNETLINK answers: File exists [2025-09-24 13:30:49.200] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:30:49.266] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:30:49.266] ubi1:animations is mounted. [2025-09-24 13:30:49.266] ubi2:dml_code is mounted. [2025-09-24 13:30:49.266] ubi0:textures is mounted. [2025-09-24 13:30:49.266] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:30:49.266] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:30:49.266] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:30:49.266] data.LB_FadeInType0=100 [2025-09-24 13:30:49.266] data.CHLH_FadeInType0=0 [2025-09-24 13:30:49.266] data.WU_FadeInDelay=0 [2025-09-24 13:30:49.266] max_time_out=0 [2025-09-24 13:30:49.266] No splash screen [2025-09-24 13:30:49.266] stop dss Done [2025-09-24 13:30:49.282] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:30:49.298] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:30:49.331] /dev/mem opened. [2025-09-24 13:30:49.331] Memory mapped at address 0xffff89f12000. [2025-09-24 13:30:49.331] Read at address 0x00600018 (0xffff89f12018): 0x00000000 [2025-09-24 13:30:49.331] Write at address 0x00600018 (0xffff89f12018): 0x00400040, readback 0x00400040 [2025-09-24 13:30:49.475] Loaded PowerVR consumer services. [2025-09-24 13:30:49.603] Waiting data available... [2025-09-24 13:30:49.619] 512+0 records in [2025-09-24 13:30:49.619] 512+0 records out [2025-09-24 13:30:49.683] Starting syslogd/klogd: done [2025-09-24 13:30:49.699] DML Start [2025-09-24 13:30:49.859] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:30:50.083] DML res1: 0 [2025-09-24 13:30:50.541] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:30:50.541] Read Success [2025-09-24 13:30:50.541] Verifying certificate... [2025-09-24 13:30:50.749] Verified OK [2025-09-24 13:30:50.765] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:30:52.437] Verified OK [2025-09-24 13:30:52.437] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:30:52.992] Verified OK [2025-09-24 13:30:52.992] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:30:55.662] fs.protected_hardlinks = 1 [2025-09-24 13:30:55.688] fs.protected_symlinks = 1 [2025-09-24 13:30:55.688] kernel.modules_disabled = 1 [2025-09-24 13:30:55.864] [2025-09-24 13:30:55.864] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:30:57.143] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:31:04.856] SBL1:1210.0.1.0 [2025-09-24 13:31:04.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:31:06.471] SBL2:1210.0.1.0 [2025-09-24 13:31:06.519] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 13:31:06.616] j-A [2025-09-24 13:31:13.968] The R5 Autosar Classic is running [2025-09-24 13:31:13.991] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:31:13.991] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:31:14.599] INIT: version 2.96 booting [2025-09-24 13:31:14.711] INIT: Entering runlevel: 5 [2025-09-24 13:31:14.855] mtd24 attached [2025-09-24 13:31:14.871] mtd28 attached [2025-09-24 13:31:14.902] ubi0:textures is mounted. [2025-09-24 13:31:14.902] mtd32 attached [2025-09-24 13:31:14.934] ubi1:animations is mounted. [2025-09-24 13:31:14.934] RTNETLINK answers: File exists [2025-09-24 13:31:14.995] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:31:14.995] ubi2:dml_code is mounted. [2025-09-24 13:31:14.995] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:31:14.995] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:31:14.995] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:31:14.995] data.LB_FadeInType0=100 [2025-09-24 13:31:14.995] data.CHLH_FadeInType0=0 [2025-09-24 13:31:14.995] data.WU_FadeInDelay=0 [2025-09-24 13:31:14.995] max_time_out=0 [2025-09-24 13:31:14.995] No splash screen [2025-09-24 13:31:14.995] stop dss Done [2025-09-24 13:31:14.995] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:31:15.055] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:31:15.055] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:31:15.055] /dev/mem opened. [2025-09-24 13:31:15.055] Memory mapped at address 0xffffaed36000. [2025-09-24 13:31:15.055] Read at address 0x00600018 (0xffffaed36018): 0x00000000 [2025-09-24 13:31:15.055] Write at address 0x00600018 (0xffffaed36018): 0x00400040, readback 0x00400040 [2025-09-24 13:31:15.232] Loaded PowerVR consumer services. [2025-09-24 13:31:15.343] Waiting data available... [2025-09-24 13:31:15.375] 512+0 records in [2025-09-24 13:31:15.375] 512+0 records out [2025-09-24 13:31:15.423] Starting syslogd/klogd: done [2025-09-24 13:31:15.439] DML Start [2025-09-24 13:31:15.615] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:31:15.854] DML res1: 0 [2025-09-24 13:31:16.248] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:31:16.248] Read Success [2025-09-24 13:31:16.248] Verifying certificate... [2025-09-24 13:31:16.520] Verified OK [2025-09-24 13:31:16.536] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:31:18.322] Verified OK [2025-09-24 13:31:18.322] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:31:18.872] Verified OK [2025-09-24 13:31:18.872] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:31:21.367] fs.protected_hardlinks = 1 [2025-09-24 13:31:21.382] fs.protected_symlinks = 1 [2025-09-24 13:31:21.382] kernel.modules_disabled = 1 [2025-09-24 13:31:21.590] [2025-09-24 13:31:21.590] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:31:22.931] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:31:30.588] SBL1:1210.0.1.0 [2025-09-24 13:31:30.636] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:31:32.203] SBL2:1210.0.1.0 [2025-09-24 13:31:32.250] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:31:32.362] j-A [2025-09-24 13:31:39.700] The R5 Autosar Classic is running [2025-09-24 13:31:39.731] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:31:39.731] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:31:40.339] INIT: version 2.96 booting [2025-09-24 13:31:40.451] INIT: Entering runlevel: 5 [2025-09-24 13:31:40.610] mtd32 attached [2025-09-24 13:31:40.610] mtd24 attached [2025-09-24 13:31:40.626] mtd28 attached [2025-09-24 13:31:40.674] RTNETLINK answers: File exists [2025-09-24 13:31:40.674] ubi0:dml_code is mounted. [2025-09-24 13:31:40.714] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:31:40.714] ubi1:textures is mounted. [2025-09-24 13:31:40.714] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:31:40.714] ubi2:animations is mounted. [2025-09-24 13:31:40.714] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:31:40.714] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:31:40.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:31:40.734] data.LB_FadeInType0=100 [2025-09-24 13:31:40.734] data.CHLH_FadeInType0=0 [2025-09-24 13:31:40.734] data.WU_FadeInDelay=0 [2025-09-24 13:31:40.734] max_time_out=0 [2025-09-24 13:31:40.734] No splash screen [2025-09-24 13:31:40.734] stop dss Done [2025-09-24 13:31:40.783] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:31:40.783] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:31:40.818] /dev/mem opened. [2025-09-24 13:31:40.818] Memory mapped at address 0xffff9a00c000. [2025-09-24 13:31:40.818] Read at address 0x00600018 (0xffff9a00c018): 0x00000000 [2025-09-24 13:31:40.818] Write at address 0x00600018 (0xffff9a00c018): 0x00400040, readback 0x00400040 [2025-09-24 13:31:40.977] Loaded PowerVR consumer services. [2025-09-24 13:31:41.074] Waiting data available... [2025-09-24 13:31:41.089] 512+0 records in [2025-09-24 13:31:41.089] 512+0 records out [2025-09-24 13:31:41.137] Starting syslogd/klogd: done [2025-09-24 13:31:41.153] DML Start [2025-09-24 13:31:41.313] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:31:41.521] DML res1: 0 [2025-09-24 13:31:41.982] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:31:41.982] Read Success [2025-09-24 13:31:41.982] Verifying certificate... [2025-09-24 13:31:42.238] Verified OK [2025-09-24 13:31:42.253] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:31:43.788] Verified OK [2025-09-24 13:31:43.788] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:31:44.452] Verified OK [2025-09-24 13:31:44.452] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:31:47.171] fs.protected_hardlinks = 1 [2025-09-24 13:31:47.171] fs.protected_symlinks = 1 [2025-09-24 13:31:47.186] kernel.modules_disabled = 1 [2025-09-24 13:31:47.378] [2025-09-24 13:31:47.378] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:31:48.599] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:31:56.352] SBL1:1210.0.1.0 [2025-09-24 13:31:56.384] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:31:57.967] SBL2:1210.0.1.0 [2025-09-24 13:31:57.999] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 13:31:58.111] j-A [2025-09-24 13:32:05.486] The R5 Autosar Classic is running [2025-09-24 13:32:05.486] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:32:05.486] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:32:06.093] INIT: version 2.96 booting [2025-09-24 13:32:06.205] INIT: Entering runlevel: 5 [2025-09-24 13:32:06.364] mtd24 attached [2025-09-24 13:32:06.364] mtd28 attached [2025-09-24 13:32:06.396] mtd32 attached [2025-09-24 13:32:06.493] ubi0:textures is mounted. [2025-09-24 13:32:06.493] RTNETLINK answers: File exists [2025-09-24 13:32:06.493] ubi1:animations is mounted. [2025-09-24 13:32:06.493] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:32:06.493] ubi2:dml_code is mounted. [2025-09-24 13:32:06.493] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:32:06.493] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:32:06.493] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:32:06.493] data.LB_FadeInType0=100 [2025-09-24 13:32:06.493] data.CHLH_FadeInType0=0 [2025-09-24 13:32:06.493] data.WU_FadeInDelay=0 [2025-09-24 13:32:06.493] max_time_out=0 [2025-09-24 13:32:06.493] No splash screen [2025-09-24 13:32:06.493] stop dss Done [2025-09-24 13:32:06.493] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:32:06.541] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:32:06.576] /dev/mem opened. [2025-09-24 13:32:06.576] Memory mapped at address 0xffffbdfb5000. [2025-09-24 13:32:06.576] Read at address 0x00600018 (0xffffbdfb5018): 0x00000000 [2025-09-24 13:32:06.576] Write at address 0x00600018 (0xffffbdfb5018): 0x00400040, readback 0x00400040 [2025-09-24 13:32:06.576] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:32:06.655] Loaded PowerVR consumer services. [2025-09-24 13:32:06.831] Waiting data available... [2025-09-24 13:32:06.847] 512+0 records in [2025-09-24 13:32:06.847] 512+0 records out [2025-09-24 13:32:06.895] Starting syslogd/klogd: done [2025-09-24 13:32:06.911] DML Start [2025-09-24 13:32:07.087] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:32:07.327] DML res1: 0 [2025-09-24 13:32:07.741] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:32:07.741] Read Success [2025-09-24 13:32:07.741] Verifying certificate... [2025-09-24 13:32:08.028] Verified OK [2025-09-24 13:32:08.044] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:32:09.672] Verified OK [2025-09-24 13:32:09.672] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:32:10.272] Verified OK [2025-09-24 13:32:10.272] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:32:12.894] fs.protected_hardlinks = 1 [2025-09-24 13:32:12.910] fs.protected_symlinks = 1 [2025-09-24 13:32:12.910] kernel.modules_disabled = 1 [2025-09-24 13:32:13.101] [2025-09-24 13:32:13.101] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:32:14.432] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:32:22.084] SBL1:1210.0.1.0 [2025-09-24 13:32:22.132] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:32:23.699] SBL2:1210.0.1.0 [2025-09-24 13:32:23.747] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:32:23.843] j-A [2025-09-24 13:32:31.197] The R5 Autosar Classic is running [2025-09-24 13:32:31.219] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:32:31.219] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:32:31.827] INIT: version 2.96 booting [2025-09-24 13:32:31.939] INIT: Entering runlevel: 5 [2025-09-24 13:32:32.098] mtd32 attached [2025-09-24 13:32:32.098] mtd28 attached [2025-09-24 13:32:32.114] mtd24 attached [2025-09-24 13:32:32.162] RTNETLINK answers: File exists [2025-09-24 13:32:32.162] ubi1:animations is mounted. [2025-09-24 13:32:32.198] ubi0:dml_code is mounted. [2025-09-24 13:32:32.198] ubi2:textures is mounted. [2025-09-24 13:32:32.198] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:32:32.198] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:32:32.198] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:32:32.198] data.LB_FadeInType0=100 [2025-09-24 13:32:32.224] data.CHLH_FadeInType0=0 [2025-09-24 13:32:32.224] data.WU_FadeInDelay=0 [2025-09-24 13:32:32.224] max_time_out=0 [2025-09-24 13:32:32.224] No splash screen [2025-09-24 13:32:32.224] stop dss Done [2025-09-24 13:32:32.224] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:32:32.224] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:32:32.295] /dev/mem opened. [2025-09-24 13:32:32.295] Memory mapped at address 0xffffb7235000. [2025-09-24 13:32:32.295] Read at address 0x00600018 (0xffffb7235018): 0x00000000 [2025-09-24 13:32:32.295] Write at address 0x00600018 (0xffffb7235018): 0x00400040, readback 0x00400040 [2025-09-24 13:32:32.295] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:32:32.311] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:32:32.406] Loaded PowerVR consumer services. [2025-09-24 13:32:32.567] Waiting data available... [2025-09-24 13:32:32.582] 512+0 records in [2025-09-24 13:32:32.582] 512+0 records out [2025-09-24 13:32:32.614] Starting syslogd/klogd: done [2025-09-24 13:32:32.630] DML Start [2025-09-24 13:32:32.806] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:32:33.029] DML res1: 0 [2025-09-24 13:32:33.492] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:32:33.492] Read Success [2025-09-24 13:32:33.492] Verifying certificate... [2025-09-24 13:32:33.764] Verified OK [2025-09-24 13:32:33.796] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:32:35.521] Verified OK [2025-09-24 13:32:35.521] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:32:36.117] Verified OK [2025-09-24 13:32:36.117] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:32:38.691] fs.protected_hardlinks = 1 [2025-09-24 13:32:38.707] fs.protected_symlinks = 1 [2025-09-24 13:32:38.707] kernel.modules_disabled = 1 [2025-09-24 13:32:38.898] [2025-09-24 13:32:38.898] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:32:40.090] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:32:47.825] SBL1:1210.0.1.0 [2025-09-24 13:32:47.857] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:32:49.439] SBL2:1210.0.1.0 [2025-09-24 13:32:49.487] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:32:49.583] j-A [2025-09-24 13:32:56.939] The R5 Autosar Classic is running [2025-09-24 13:32:56.939] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:32:56.959] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:32:57.567] INIT: version 2.96 booting [2025-09-24 13:32:57.678] INIT: Entering runlevel: 5 [2025-09-24 13:32:57.839] mtd24 attached [2025-09-24 13:32:57.839] mtd28 attached [2025-09-24 13:32:57.854] mtd32 attached [2025-09-24 13:32:57.886] ubi0:textures is mounted. [2025-09-24 13:32:57.937] RTNETLINK answers: File exists [2025-09-24 13:32:57.937] ubi2:dml_code is mounted. [2025-09-24 13:32:57.937] ubi1:animations is mounted. [2025-09-24 13:32:57.937] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:32:57.937] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:32:57.937] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:32:57.969] data.LB_FadeInType0=100 [2025-09-24 13:32:57.969] data.CHLH_FadeInType0=0 [2025-09-24 13:32:57.969] data.WU_FadeInDelay=0 [2025-09-24 13:32:57.969] max_time_out=0 [2025-09-24 13:32:57.969] No splash screen [2025-09-24 13:32:57.969] stop dss Done [2025-09-24 13:32:57.969] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:32:57.969] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:32:58.029] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:32:58.029] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:32:58.029] /dev/mem opened. [2025-09-24 13:32:58.029] Memory mapped at address 0xffff9eef8000. [2025-09-24 13:32:58.029] Read at address 0x00600018 (0xffff9eef8018): 0x00000000 [2025-09-24 13:32:58.029] Write at address 0x00600018 (0xffff9eef8018): 0x00400040, readback 0x00400040 [2025-09-24 13:32:58.125] Loaded PowerVR consumer services. [2025-09-24 13:32:58.301] Waiting data available... [2025-09-24 13:32:58.317] 512+0 records in [2025-09-24 13:32:58.317] 512+0 records out [2025-09-24 13:32:58.349] Starting syslogd/klogd: done [2025-09-24 13:32:58.366] DML Start [2025-09-24 13:32:58.541] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:32:58.797] DML res1: 0 [2025-09-24 13:32:59.172] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:32:59.172] Read Success [2025-09-24 13:32:59.172] Verifying certificate... [2025-09-24 13:32:59.396] Verified OK [2025-09-24 13:32:59.412] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:33:01.075] Verified OK [2025-09-24 13:33:01.075] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:33:01.731] Verified OK [2025-09-24 13:33:01.731] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:33:04.448] fs.protected_hardlinks = 1 [2025-09-24 13:33:04.464] fs.protected_symlinks = 1 [2025-09-24 13:33:04.464] kernel.modules_disabled = 1 [2025-09-24 13:33:04.656] [2025-09-24 13:33:04.656] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:33:05.838] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:33:13.537] SBL1:1210.0.1.0 [2025-09-24 13:33:13.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:33:15.151] SBL2:1210.0.1.0 [2025-09-24 13:33:15.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:33:15.312] j-A [2025-09-24 13:33:22.682] The R5 Autosar Classic is running [2025-09-24 13:33:22.682] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:33:22.682] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:33:23.290] INIT: version 2.96 booting [2025-09-24 13:33:23.402] INIT: Entering runlevel: 5 [2025-09-24 13:33:23.562] mtd24 attached [2025-09-24 13:33:23.578] mtd32 attached [2025-09-24 13:33:23.578] mtd28 attached [2025-09-24 13:33:23.626] ubi0:textures is mounted. [2025-09-24 13:33:23.642] RTNETLINK answers: File exists [2025-09-24 13:33:23.642] ubi1:dml_code is mounted. [2025-09-24 13:33:23.694] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:33:23.694] ubi2:animations is mounted. [2025-09-24 13:33:23.694] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:33:23.694] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:33:23.694] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:33:23.694] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:33:23.694] data.LB_FadeInType0=100 [2025-09-24 13:33:23.694] data.CHLH_FadeInType0=0 [2025-09-24 13:33:23.694] data.WU_FadeInDelay=0 [2025-09-24 13:33:23.694] max_time_out=0 [2025-09-24 13:33:23.694] No splash screen [2025-09-24 13:33:23.694] stop dss Done [2025-09-24 13:33:23.765] /dev/mem opened. [2025-09-24 13:33:23.765] Memory mapped at address 0xffff9f4dc000. [2025-09-24 13:33:23.765] Read at address 0x00600018 (0xffff9f4dc018): 0x00000000 [2025-09-24 13:33:23.765] Write at address 0x00600018 (0xffff9f4dc018): 0x00400040, readback 0x00400040 [2025-09-24 13:33:23.791] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:33:23.791] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:33:23.872] Loaded PowerVR consumer services. [2025-09-24 13:33:24.032] Waiting data available... [2025-09-24 13:33:24.048] 512+0 records in [2025-09-24 13:33:24.048] 512+0 records out [2025-09-24 13:33:24.112] Starting syslogd/klogd: done [2025-09-24 13:33:24.128] DML Start [2025-09-24 13:33:24.271] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:33:24.511] DML res1: 0 [2025-09-24 13:33:24.974] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:33:24.990] Read Success [2025-09-24 13:33:24.990] Verifying certificate... [2025-09-24 13:33:25.215] Verified OK [2025-09-24 13:33:25.247] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:33:27.003] Verified OK [2025-09-24 13:33:27.004] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:33:27.574] Verified OK [2025-09-24 13:33:27.574] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:33:30.067] fs.protected_hardlinks = 1 [2025-09-24 13:33:30.067] fs.protected_symlinks = 1 [2025-09-24 13:33:30.083] kernel.modules_disabled = 1 [2025-09-24 13:33:30.275] [2025-09-24 13:33:30.275] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:33:31.529] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:33:39.295] SBL1:1210.0.1.0 [2025-09-24 13:33:39.327] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:33:40.910] SBL2:1210.0.1.0 [2025-09-24 13:33:40.958] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:33:41.053] j-A [2025-09-24 13:33:48.408] The R5 Autosar Classic is running [2025-09-24 13:33:48.408] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:33:48.430] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:33:49.037] INIT: version 2.96 booting [2025-09-24 13:33:49.149] INIT: Entering runlevel: 5 [2025-09-24 13:33:49.309] mtd28 attached [2025-09-24 13:33:49.309] mtd24 attached [2025-09-24 13:33:49.341] mtd32 attached [2025-09-24 13:33:49.341] ubi0:animations is mounted. [2025-09-24 13:33:49.373] RTNETLINK answers: File exists [2025-09-24 13:33:49.408] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:33:49.408] ubi1:textures is mounted. [2025-09-24 13:33:49.408] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:33:49.408] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:33:49.408] ubi2:dml_code is mounted. [2025-09-24 13:33:49.408] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:33:49.408] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:33:49.449] data.LB_FadeInType0=100 [2025-09-24 13:33:49.449] data.CHLH_FadeInType0=0 [2025-09-24 13:33:49.449] data.WU_FadeInDelay=0 [2025-09-24 13:33:49.449] max_time_out=0 [2025-09-24 13:33:49.449] No splash screen [2025-09-24 13:33:49.449] stop dss Done [2025-09-24 13:33:49.486] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:33:49.487] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:33:49.502] /dev/mem opened. [2025-09-24 13:33:49.502] Memory mapped at address 0xffff97f3e000. [2025-09-24 13:33:49.528] Read at address 0x00600018 (0xffff97f3e018): 0x00000000 [2025-09-24 13:33:49.528] Write at address 0x00600018 (0xffff97f3e018): 0x00400040, readback 0x00400040 [2025-09-24 13:33:49.673] Loaded PowerVR consumer services. [2025-09-24 13:33:49.785] Waiting data available... [2025-09-24 13:33:49.801] 512+0 records in [2025-09-24 13:33:49.801] 512+0 records out [2025-09-24 13:33:49.817] Starting syslogd/klogd: done [2025-09-24 13:33:49.833] DML Start [2025-09-24 13:33:50.024] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:33:50.248] DML res1: 0 [2025-09-24 13:33:50.710] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:33:50.710] Read Success [2025-09-24 13:33:50.710] Verifying certificate... [2025-09-24 13:33:50.934] Verified OK [2025-09-24 13:33:50.950] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:33:52.574] Verified OK [2025-09-24 13:33:52.574] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:33:53.205] Verified OK [2025-09-24 13:33:53.205] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:33:55.731] fs.protected_hardlinks = 1 [2025-09-24 13:33:55.763] fs.protected_symlinks = 1 [2025-09-24 13:33:55.763] kernel.modules_disabled = 1 [2025-09-24 13:33:55.971] [2025-09-24 13:33:55.971] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:33:57.255] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:34:05.023] SBL1:1210.0.1.0 [2025-09-24 13:34:05.055] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:34:06.638] SBL2:1210.0.1.0 [2025-09-24 13:34:06.686] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:34:06.782] j-A [2025-09-24 13:34:14.137] The R5 Autosar Classic is running [2025-09-24 13:34:14.159] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:34:14.159] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:34:14.766] INIT: version 2.96 booting [2025-09-24 13:34:14.878] INIT: Entering runlevel: 5 [2025-09-24 13:34:15.038] mtd24 attached [2025-09-24 13:34:15.054] mtd28 attached [2025-09-24 13:34:15.054] mtd32 attached [2025-09-24 13:34:15.102] RTNETLINK answers: File exists [2025-09-24 13:34:15.146] ubi0:textures is mounted. [2025-09-24 13:34:15.146] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:34:15.146] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:34:15.146] ubi1:animations is mounted. [2025-09-24 13:34:15.146] ubi2:dml_code is mounted. [2025-09-24 13:34:15.146] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:34:15.146] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:34:15.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:34:15.171] data.LB_FadeInType0=100 [2025-09-24 13:34:15.171] data.CHLH_FadeInType0=0 [2025-09-24 13:34:15.171] data.WU_FadeInDelay=0 [2025-09-24 13:34:15.171] max_time_out=0 [2025-09-24 13:34:15.171] No splash screen [2025-09-24 13:34:15.171] stop dss Done [2025-09-24 13:34:15.187] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:34:15.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:34:15.251] /dev/mem opened. [2025-09-24 13:34:15.251] Memory mapped at address 0xffffa1cfc000. [2025-09-24 13:34:15.251] Read at address 0x00600018 (0xffffa1cfc018): 0x00000000 [2025-09-24 13:34:15.251] Write at address 0x00600018 (0xffffa1cfc018): 0x00400040, readback 0x00400040 [2025-09-24 13:34:15.474] Loaded PowerVR consumer services. [2025-09-24 13:34:15.529] Waiting data available... [2025-09-24 13:34:15.529] 512+0 records in [2025-09-24 13:34:15.529] 512+0 records out [2025-09-24 13:34:15.561] Starting syslogd/klogd: done [2025-09-24 13:34:15.577] DML Start [2025-09-24 13:34:15.768] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:34:15.992] DML res1: 0 [2025-09-24 13:34:16.451] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:34:16.451] Read Success [2025-09-24 13:34:16.451] Verifying certificate... [2025-09-24 13:34:16.723] Verified OK [2025-09-24 13:34:16.739] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:34:18.497] Verified OK [2025-09-24 13:34:18.497] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:34:19.025] Verified OK [2025-09-24 13:34:19.025] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:34:21.664] fs.protected_hardlinks = 1 [2025-09-24 13:34:21.664] fs.protected_symlinks = 1 [2025-09-24 13:34:21.680] kernel.modules_disabled = 1 [2025-09-24 13:34:21.871] [2025-09-24 13:34:21.871] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:34:23.034] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:34:30.751] SBL1:1210.0.1.0 [2025-09-24 13:34:30.783] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:34:32.365] SBL2:1210.0.1.0 [2025-09-24 13:34:32.397] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:34:32.509] j-A [2025-09-24 13:34:39.883] The R5 Autosar Classic is running [2025-09-24 13:34:39.883] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:34:39.883] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:34:40.490] INIT: version 2.96 booting [2025-09-24 13:34:40.602] INIT: Entering runlevel: 5 [2025-09-24 13:34:40.746] mtd28 attached [2025-09-24 13:34:40.762] mtd24 attached [2025-09-24 13:34:40.778] mtd32 attached [2025-09-24 13:34:40.855] RTNETLINK answers: File exists [2025-09-24 13:34:40.855] ubi0:animations is mounted. [2025-09-24 13:34:40.855] ubi1:textures is mounted. [2025-09-24 13:34:40.855] ubi2:dml_code is mounted. [2025-09-24 13:34:40.855] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:34:40.855] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:34:40.855] data.LB_FadeInType0=100 [2025-09-24 13:34:40.855] data.CHLH_FadeInType0=0 [2025-09-24 13:34:40.890] data.WU_FadeInDelay=0 [2025-09-24 13:34:40.890] max_time_out=0 [2025-09-24 13:34:40.890] No splash screen [2025-09-24 13:34:40.890] stop dss Done [2025-09-24 13:34:40.890] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:34:40.890] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:34:40.890] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:34:40.957] /dev/mem opened. [2025-09-24 13:34:40.957] Memory mapped at address 0xffff97599000. [2025-09-24 13:34:40.957] Read at address 0x00600018 (0xffff97599018): 0x00000000 [2025-09-24 13:34:40.957] Write at address 0x00600018 (0xffff97599018): 0x00400040, readback 0x00400040 [2025-09-24 13:34:40.979] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:34:40.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:34:41.075] Loaded PowerVR consumer services. [2025-09-24 13:34:41.234] Waiting data available... [2025-09-24 13:34:41.250] 512+0 records in [2025-09-24 13:34:41.250] 512+0 records out [2025-09-24 13:34:41.298] Starting syslogd/klogd: done [2025-09-24 13:34:41.314] DML Start [2025-09-24 13:34:41.491] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:34:41.682] DML res1: 0 [2025-09-24 13:34:42.155] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:34:42.155] Read Success [2025-09-24 13:34:42.155] Verifying certificate... [2025-09-24 13:34:42.378] Verified OK [2025-09-24 13:34:42.394] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:34:43.919] Verified OK [2025-09-24 13:34:43.919] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:34:44.511] Verified OK [2025-09-24 13:34:44.511] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:34:47.261] fs.protected_hardlinks = 1 [2025-09-24 13:34:47.277] fs.protected_symlinks = 1 [2025-09-24 13:34:47.277] kernel.modules_disabled = 1 [2025-09-24 13:34:47.469] [2025-09-24 13:34:47.469] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:34:48.761] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:34:56.496] SBL1:1210.0.1.0 [2025-09-24 13:34:56.528] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:34:58.111] SBL2:1210.0.1.0 [2025-09-24 13:34:58.143] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:34:58.254] j-A [2025-09-24 13:35:05.627] The R5 Autosar Classic is running [2025-09-24 13:35:05.627] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:35:05.627] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:35:06.235] INIT: version 2.96 booting [2025-09-24 13:35:06.331] INIT: Entering runlevel: 5 [2025-09-24 13:35:06.491] mtd24 attached [2025-09-24 13:35:06.506] mtd32 attached [2025-09-24 13:35:06.522] mtd28 attached [2025-09-24 13:35:06.554] ubi0:textures is mounted. [2025-09-24 13:35:06.570] RTNETLINK answers: File exists [2025-09-24 13:35:06.570] ubi1:dml_code is mounted. [2025-09-24 13:35:06.621] ubi2:animations is mounted. [2025-09-24 13:35:06.621] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:35:06.621] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:35:06.621] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:35:06.621] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:35:06.621] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:35:06.621] data.LB_FadeInType0=100 [2025-09-24 13:35:06.621] data.CHLH_FadeInType0=0 [2025-09-24 13:35:06.621] data.WU_FadeInDelay=0 [2025-09-24 13:35:06.621] max_time_out=0 [2025-09-24 13:35:06.621] No splash screen [2025-09-24 13:35:06.621] stop dss Done [2025-09-24 13:35:06.653] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:35:06.686] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:35:06.686] /dev/mem opened. [2025-09-24 13:35:06.686] Memory mapped at address 0xffff9d216000. [2025-09-24 13:35:06.686] Read at address 0x00600018 (0xffff9d216018): 0x00000000 [2025-09-24 13:35:06.686] Write at address 0x00600018 (0xffff9d216018): 0x00400040, readback 0x00400040 [2025-09-24 13:35:06.845] Loaded PowerVR consumer services. [2025-09-24 13:35:06.973] Waiting data available... [2025-09-24 13:35:06.989] 512+0 records in [2025-09-24 13:35:06.989] 512+0 records out [2025-09-24 13:35:07.037] Starting syslogd/klogd: done [2025-09-24 13:35:07.053] DML Start [2025-09-24 13:35:07.230] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:35:07.405] DML res1: 0 [2025-09-24 13:35:07.885] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:35:07.885] Read Success [2025-09-24 13:35:07.901] Verifying certificate... [2025-09-24 13:35:08.140] Verified OK [2025-09-24 13:35:08.156] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:35:09.830] Verified OK [2025-09-24 13:35:09.830] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:35:10.435] Verified OK [2025-09-24 13:35:10.435] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:35:13.074] fs.protected_hardlinks = 1 [2025-09-24 13:35:13.074] fs.protected_symlinks = 1 [2025-09-24 13:35:13.089] kernel.modules_disabled = 1 [2025-09-24 13:35:13.282] [2025-09-24 13:35:13.282] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:35:14.465] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:35:22.245] SBL1:1210.0.1.0 [2025-09-24 13:35:22.293] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:35:23.859] SBL2:1210.0.1.0 [2025-09-24 13:35:23.906] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:35:24.003] j-A [2025-09-24 13:35:31.357] The R5 Autosar Classic is running [2025-09-24 13:35:31.380] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:35:31.380] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:35:31.987] INIT: version 2.96 booting [2025-09-24 13:35:32.100] INIT: Entering runlevel: 5 [2025-09-24 13:35:32.243] mtd24 attached [2025-09-24 13:35:32.259] mtd32 attached [2025-09-24 13:35:32.275] mtd28 attached [2025-09-24 13:35:32.291] ubi0:textures is mounted. [2025-09-24 13:35:32.347] ubi1:dml_code is mounted. [2025-09-24 13:35:32.347] RTNETLINK answers: File exists [2025-09-24 13:35:32.347] ubi2:animations is mounted. [2025-09-24 13:35:32.347] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:35:32.347] data.LB_FadeInType0=100 [2025-09-24 13:35:32.347] data.CHLH_FadeInType0=0 [2025-09-24 13:35:32.347] data.WU_FadeInDelay=0 [2025-09-24 13:35:32.378] max_time_out=0 [2025-09-24 13:35:32.378] No splash screen [2025-09-24 13:35:32.378] stop dss Done [2025-09-24 13:35:32.378] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:35:32.378] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:35:32.394] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:35:32.436] /dev/mem opened. [2025-09-24 13:35:32.436] Memory mapped at address 0xffff8d9d2000. [2025-09-24 13:35:32.436] Read at address 0x00600018 (0xffff8d9d2018): 0x00000000 [2025-09-24 13:35:32.436] Write at address 0x00600018 (0xffff8d9d2018): 0x00400040, readback 0x00400040 [2025-09-24 13:35:32.436] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:35:32.517] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:35:32.532] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:35:32.596] Loaded PowerVR consumer services. [2025-09-24 13:35:32.724] Waiting data available... [2025-09-24 13:35:32.740] 512+0 records in [2025-09-24 13:35:32.740] 512+0 records out [2025-09-24 13:35:32.788] Starting syslogd/klogd: done [2025-09-24 13:35:32.804] DML Start [2025-09-24 13:35:32.947] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:35:33.156] DML res1: 0 [2025-09-24 13:35:33.597] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:35:33.597] Read Success [2025-09-24 13:35:33.597] Verifying certificate... [2025-09-24 13:35:33.805] Verified OK [2025-09-24 13:35:33.821] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:35:35.465] Verified OK [2025-09-24 13:35:35.465] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:35:36.100] Verified OK [2025-09-24 13:35:36.100] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:35:38.706] fs.protected_hardlinks = 1 [2025-09-24 13:35:38.706] fs.protected_symlinks = 1 [2025-09-24 13:35:38.722] kernel.modules_disabled = 1 [2025-09-24 13:35:38.898] [2025-09-24 13:35:38.898] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:35:40.321] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:35:47.970] SBL1:1210.0.1.0 [2025-09-24 13:35:48.002] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:35:49.585] SBL2:1210.0.1.0 [2025-09-24 13:35:49.616] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:35:49.728] j-A [2025-09-24 13:35:57.082] The R5 Autosar Classic is running [2025-09-24 13:35:57.082] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:35:57.103] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:35:57.710] INIT: version 2.96 booting [2025-09-24 13:35:57.823] INIT: Entering runlevel: 5 [2025-09-24 13:35:57.982] mtd24 attached [2025-09-24 13:35:57.998] mtd32 attached [2025-09-24 13:35:57.998] mtd28 attached [2025-09-24 13:35:58.113] RTNETLINK answers: File exists [2025-09-24 13:35:58.113] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:35:58.113] ubi0:textures is mounted. [2025-09-24 13:35:58.113] ubi2:animations is mounted. [2025-09-24 13:35:58.113] ubi1:dml_code is mounted. [2025-09-24 13:35:58.113] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:35:58.113] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:35:58.113] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:35:58.113] data.LB_FadeInType0=100 [2025-09-24 13:35:58.113] data.CHLH_FadeInType0=0 [2025-09-24 13:35:58.113] data.WU_FadeInDelay=0 [2025-09-24 13:35:58.113] max_time_out=0 [2025-09-24 13:35:58.113] No splash screen [2025-09-24 13:35:58.113] stop dss Done [2025-09-24 13:35:58.113] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:35:58.162] /dev/mem opened. [2025-09-24 13:35:58.162] Memory mapped at address 0xffffa38da000. [2025-09-24 13:35:58.188] Read at address 0x00600018 (0xffffa38da018): 0x00000000 [2025-09-24 13:35:58.188] Write at address 0x00600018 (0xffffa38da018): 0x00400040, readback 0x00400040 [2025-09-24 13:35:58.219] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:35:58.235] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:35:58.459] Loaded PowerVR consumer services. [2025-09-24 13:35:58.475] Waiting data available... [2025-09-24 13:35:58.507] 512+0 records in [2025-09-24 13:35:58.507] 512+0 records out [2025-09-24 13:35:58.539] Starting syslogd/klogd: done [2025-09-24 13:35:58.555] DML Start [2025-09-24 13:35:58.763] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:35:58.955] DML res1: 0 [2025-09-24 13:35:59.457] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:35:59.457] Read Success [2025-09-24 13:35:59.457] Verifying certificate... [2025-09-24 13:35:59.681] Verified OK [2025-09-24 13:35:59.697] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:36:01.328] Verified OK [2025-09-24 13:36:01.328] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:36:01.996] Verified OK [2025-09-24 13:36:01.996] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:36:04.555] fs.protected_hardlinks = 1 [2025-09-24 13:36:04.555] fs.protected_symlinks = 1 [2025-09-24 13:36:04.570] kernel.modules_disabled = 1 [2025-09-24 13:36:04.762] [2025-09-24 13:36:04.762] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:36:05.969] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:36:13.722] SBL1:1210.0.1.0 [2025-09-24 13:36:13.770] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:36:15.337] SBL2:1210.0.1.0 [2025-09-24 13:36:15.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:36:15.497] j-A [2025-09-24 13:36:22.834] The R5 Autosar Classic is running [2025-09-24 13:36:22.865] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:36:22.865] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:36:23.473] INIT: version 2.96 booting [2025-09-24 13:36:23.585] INIT: Entering runlevel: 5 [2025-09-24 13:36:23.744] mtd24 attached [2025-09-24 13:36:23.744] mtd32 attached [2025-09-24 13:36:23.760] mtd28 attached [2025-09-24 13:36:23.776] ubi0:textures is mounted. [2025-09-24 13:36:23.809] RTNETLINK answers: File exists [2025-09-24 13:36:23.872] ubi2:animations is mounted. [2025-09-24 13:36:23.872] ubi1:dml_code is mounted. [2025-09-24 13:36:23.872] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:36:23.872] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:36:23.872] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:36:23.872] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:36:23.872] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:36:23.872] data.LB_FadeInType0=100 [2025-09-24 13:36:23.872] data.CHLH_FadeInType0=0 [2025-09-24 13:36:23.872] data.WU_FadeInDelay=0 [2025-09-24 13:36:23.872] max_time_out=0 [2025-09-24 13:36:23.872] No splash screen [2025-09-24 13:36:23.872] stop dss Done [2025-09-24 13:36:23.920] /dev/mem opened. [2025-09-24 13:36:23.920] Memory mapped at address 0xffffae855000. [2025-09-24 13:36:23.946] Read at address 0x00600018 (0xffffae855018): 0x00000000 [2025-09-24 13:36:23.946] Write at address 0x00600018 (0xffffae855018): 0x00400040, readback 0x00400040 [2025-09-24 13:36:23.962] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:36:23.978] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:36:24.233] Loaded PowerVR consumer services. [2025-09-24 13:36:24.233] Waiting data available... [2025-09-24 13:36:24.249] 512+0 records in [2025-09-24 13:36:24.249] 512+0 records out [2025-09-24 13:36:24.297] Starting syslogd/klogd: done [2025-09-24 13:36:24.313] DML Start [2025-09-24 13:36:24.440] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:36:24.617] DML res1: 0 [2025-09-24 13:36:25.159] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:36:25.175] Read Success [2025-09-24 13:36:25.175] Verifying certificate... [2025-09-24 13:36:25.416] Verified OK [2025-09-24 13:36:25.432] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:36:27.120] Verified OK [2025-09-24 13:36:27.120] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:36:27.750] Verified OK [2025-09-24 13:36:27.750] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:36:30.260] fs.protected_hardlinks = 1 [2025-09-24 13:36:30.276] fs.protected_symlinks = 1 [2025-09-24 13:36:30.276] kernel.modules_disabled = 1 [2025-09-24 13:36:30.484] [2025-09-24 13:36:30.484] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:36:31.715] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:36:39.441] SBL1:1210.0.1.0 [2025-09-24 13:36:39.472] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:36:41.055] SBL2:1210.0.1.0 [2025-09-24 13:36:41.103] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:36:41.199] j-A [2025-09-24 13:36:48.552] The R5 Autosar Classic is running [2025-09-24 13:36:48.574] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:36:48.574] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:36:49.182] INIT: version 2.96 booting [2025-09-24 13:36:49.294] INIT: Entering runlevel: 5 [2025-09-24 13:36:49.454] mtd32 attached [2025-09-24 13:36:49.454] mtd28 attached [2025-09-24 13:36:49.470] mtd24 attached [2025-09-24 13:36:49.518] RTNETLINK answers: File exists [2025-09-24 13:36:49.518] ubi1:animations is mounted. [2025-09-24 13:36:49.580] ubi0:dml_code is mounted. [2025-09-24 13:36:49.580] ubi2:textures is mounted. [2025-09-24 13:36:49.580] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:36:49.580] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:36:49.580] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:36:49.580] data.LB_FadeInType0=100 [2025-09-24 13:36:49.580] data.CHLH_FadeInType0=0 [2025-09-24 13:36:49.580] data.WU_FadeInDelay=0 [2025-09-24 13:36:49.580] max_time_out=0 [2025-09-24 13:36:49.580] No splash screen [2025-09-24 13:36:49.580] stop dss Done [2025-09-24 13:36:49.580] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:36:49.580] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:36:49.651] /dev/mem opened. [2025-09-24 13:36:49.651] Memory mapped at address 0xffff9ce78000. [2025-09-24 13:36:49.651] Read at address 0x00600018 (0xffff9ce78018): 0x00000000 [2025-09-24 13:36:49.651] Write at address 0x00600018 (0xffff9ce78018): 0x00400040, readback 0x00400040 [2025-09-24 13:36:49.683] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:36:49.699] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:36:49.779] Loaded PowerVR consumer services. [2025-09-24 13:36:49.940] Waiting data available... [2025-09-24 13:36:49.956] 512+0 records in [2025-09-24 13:36:49.956] 512+0 records out [2025-09-24 13:36:49.988] Starting syslogd/klogd: done [2025-09-24 13:36:50.004] DML Start [2025-09-24 13:36:50.179] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:36:50.371] DML res1: 0 [2025-09-24 13:36:50.847] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:36:50.847] Read Success [2025-09-24 13:36:50.847] Verifying certificate... [2025-09-24 13:36:51.086] Verified OK [2025-09-24 13:36:51.102] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:36:52.829] Verified OK [2025-09-24 13:36:52.829] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:36:53.404] Verified OK [2025-09-24 13:36:53.404] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:36:56.027] fs.protected_hardlinks = 1 [2025-09-24 13:36:56.027] fs.protected_symlinks = 1 [2025-09-24 13:36:56.043] kernel.modules_disabled = 1 [2025-09-24 13:36:56.235] [2025-09-24 13:36:56.235] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:36:57.408] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:37:05.175] SBL1:1210.0.1.0 [2025-09-24 13:37:05.223] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:37:06.791] SBL2:1210.0.1.0 [2025-09-24 13:37:06.838] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:37:06.950] j-A [2025-09-24 13:37:14.319] The R5 Autosar Classic is running [2025-09-24 13:37:14.319] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:37:14.319] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:37:14.928] INIT: version 2.96 booting [2025-09-24 13:37:15.039] INIT: Entering runlevel: 5 [2025-09-24 13:37:15.199] mtd24 attached [2025-09-24 13:37:15.199] mtd28 attached [2025-09-24 13:37:15.215] mtd32 attached [2025-09-24 13:37:15.262] ubi0:textures is mounted. [2025-09-24 13:37:15.308] RTNETLINK answers: File exists [2025-09-24 13:37:15.308] ubi1:animations is mounted. [2025-09-24 13:37:15.308] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:37:15.308] ubi2:dml_code is mounted. [2025-09-24 13:37:15.308] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:37:15.308] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:37:15.308] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:37:15.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:37:15.329] data.LB_FadeInType0=100 [2025-09-24 13:37:15.329] data.CHLH_FadeInType0=0 [2025-09-24 13:37:15.329] data.WU_FadeInDelay=0 [2025-09-24 13:37:15.329] max_time_out=0 [2025-09-24 13:37:15.329] No splash screen [2025-09-24 13:37:15.329] stop dss Done [2025-09-24 13:37:15.420] /dev/mem opened. [2025-09-24 13:37:15.420] Memory mapped at address 0xffff8c144000. [2025-09-24 13:37:15.420] Read at address 0x00600018 (0xffff8c144018): 0x00000000 [2025-09-24 13:37:15.420] Write at address 0x00600018 (0xffff8c144018): 0x00400040, readback 0x00400040 [2025-09-24 13:37:15.420] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:37:15.420] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:37:15.500] Loaded PowerVR consumer services. [2025-09-24 13:37:15.675] Waiting data available... [2025-09-24 13:37:15.691] 512+0 records in [2025-09-24 13:37:15.691] 512+0 records out [2025-09-24 13:37:15.707] Starting syslogd/klogd: done [2025-09-24 13:37:15.724] DML Start [2025-09-24 13:37:15.916] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:37:16.124] DML res1: 0 [2025-09-24 13:37:16.555] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:37:16.571] Read Success [2025-09-24 13:37:16.571] Verifying certificate... [2025-09-24 13:37:16.811] Verified OK [2025-09-24 13:37:16.827] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:37:18.426] Verified OK [2025-09-24 13:37:18.426] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:37:19.136] Verified OK [2025-09-24 13:37:19.136] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:37:21.758] fs.protected_hardlinks = 1 [2025-09-24 13:37:21.758] fs.protected_symlinks = 1 [2025-09-24 13:37:21.773] kernel.modules_disabled = 1 [2025-09-24 13:37:21.949] [2025-09-24 13:37:21.949] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:37:23.159] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:37:30.942] SBL1:1210.0.1.0 [2025-09-24 13:37:30.974] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:37:32.557] SBL2:1210.0.1.0 [2025-09-24 13:37:32.589] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:37:32.701] j-A [2025-09-24 13:37:40.055] The R5 Autosar Classic is running [2025-09-24 13:37:40.055] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:37:40.076] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:37:40.683] INIT: version 2.96 booting [2025-09-24 13:37:40.796] INIT: Entering runlevel: 5 [2025-09-24 13:37:40.939] mtd24 attached [2025-09-24 13:37:40.955] mtd32 attached [2025-09-24 13:37:40.971] mtd28 attached [2025-09-24 13:37:41.003] ubi0:textures is mounted. [2025-09-24 13:37:41.019] RTNETLINK answers: File exists [2025-09-24 13:37:41.019] ubi1:dml_code is mounted. [2025-09-24 13:37:41.079] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:37:41.079] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:37:41.079] ubi2:animations is mounted. [2025-09-24 13:37:41.079] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:37:41.079] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:37:41.079] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:37:41.080] data.LB_FadeInType0=100 [2025-09-24 13:37:41.080] data.CHLH_FadeInType0=0 [2025-09-24 13:37:41.080] data.WU_FadeInDelay=0 [2025-09-24 13:37:41.080] max_time_out=0 [2025-09-24 13:37:41.080] No splash screen [2025-09-24 13:37:41.080] stop dss Done [2025-09-24 13:37:41.095] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:37:41.111] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:37:41.127] /dev/mem opened. [2025-09-24 13:37:41.127] Memory mapped at address 0xffffb236f000. [2025-09-24 13:37:41.153] Read at address 0x00600018 (0xffffb236f018): 0x00000000 [2025-09-24 13:37:41.153] Write at address 0x00600018 (0xffffb236f018): 0x00400040, readback 0x00400040 [2025-09-24 13:37:41.265] Loaded PowerVR consumer services. [2025-09-24 13:37:41.456] Waiting data available... [2025-09-24 13:37:41.456] 512+0 records in [2025-09-24 13:37:41.456] 512+0 records out [2025-09-24 13:37:41.472] Starting syslogd/klogd: done [2025-09-24 13:37:41.488] DML Start [2025-09-24 13:37:41.663] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:37:41.871] DML res1: 0 [2025-09-24 13:37:42.335] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:37:42.356] Read Success [2025-09-24 13:37:42.356] Verifying certificate... [2025-09-24 13:37:42.579] Verified OK [2025-09-24 13:37:42.596] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:37:44.226] Verified OK [2025-09-24 13:37:44.242] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:37:44.878] Verified OK [2025-09-24 13:37:44.878] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:37:47.516] fs.protected_hardlinks = 1 [2025-09-24 13:37:47.532] fs.protected_symlinks = 1 [2025-09-24 13:37:47.532] kernel.modules_disabled = 1 [2025-09-24 13:37:47.723] [2025-09-24 13:37:47.723] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:37:48.932] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:37:56.662] SBL1:1210.0.1.0 [2025-09-24 13:37:56.710] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:37:58.277] SBL2:1210.0.1.0 [2025-09-24 13:37:58.324] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:37:58.421] j-A [2025-09-24 13:38:05.775] The R5 Autosar Classic is running [2025-09-24 13:38:05.800] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:38:05.800] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:38:06.408] INIT: version 2.96 booting [2025-09-24 13:38:06.519] INIT: Entering runlevel: 5 [2025-09-24 13:38:06.679] mtd32 attached [2025-09-24 13:38:06.679] mtd24 attached [2025-09-24 13:38:06.695] mtd28 attached [2025-09-24 13:38:06.800] RTNETLINK answers: File exists [2025-09-24 13:38:06.800] ubi1:textures is mounted. [2025-09-24 13:38:06.800] ubi0:dml_code is mounted. [2025-09-24 13:38:06.800] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:38:06.800] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:38:06.800] ubi2:animations is mounted. [2025-09-24 13:38:06.800] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:38:06.800] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:38:06.800] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:38:06.800] data.LB_FadeInType0=100 [2025-09-24 13:38:06.800] data.CHLH_FadeInType0=0 [2025-09-24 13:38:06.800] data.WU_FadeInDelay=0 [2025-09-24 13:38:06.800] max_time_out=0 [2025-09-24 13:38:06.800] No splash screen [2025-09-24 13:38:06.800] stop dss Done [2025-09-24 13:38:06.832] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:38:06.847] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:38:06.879] /dev/mem opened. [2025-09-24 13:38:06.879] Memory mapped at address 0xffffb8201000. [2025-09-24 13:38:06.879] Read at address 0x00600018 (0xffffb8201018): 0x00000000 [2025-09-24 13:38:06.879] Write at address 0x00600018 (0xffffb8201018): 0x00400040, readback 0x00400040 [2025-09-24 13:38:06.960] Loaded PowerVR consumer services. [2025-09-24 13:38:07.135] Waiting data available... [2025-09-24 13:38:07.152] 512+0 records in [2025-09-24 13:38:07.152] 512+0 records out [2025-09-24 13:38:07.200] Starting syslogd/klogd: done [2025-09-24 13:38:07.216] DML Start [2025-09-24 13:38:07.407] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:38:07.647] DML res1: 0 [2025-09-24 13:38:08.030] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:38:08.051] Read Success [2025-09-24 13:38:08.051] Verifying certificate... [2025-09-24 13:38:08.308] Verified OK [2025-09-24 13:38:08.308] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:38:09.970] Verified OK [2025-09-24 13:38:09.970] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:38:10.615] Verified OK [2025-09-24 13:38:10.615] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:38:13.252] fs.protected_hardlinks = 1 [2025-09-24 13:38:13.268] fs.protected_symlinks = 1 [2025-09-24 13:38:13.268] kernel.modules_disabled = 1 [2025-09-24 13:38:13.444] [2025-09-24 13:38:13.444] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:38:14.730] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:38:16.963] SBL1:1210.0.1.0 [2025-09-24 13:38:22.413] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:38:23.995] SBL2:1210.0.1.0 [2025-09-24 13:38:24.043] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:38:24.139] j-A [2025-09-24 13:38:31.494] The R5 Autosar Classic is running [2025-09-24 13:38:31.494] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:38:31.515] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:38:32.123] INIT: version 2.96 booting [2025-09-24 13:38:32.234] INIT: Entering runlevel: 5 [2025-09-24 13:38:32.378] mtd32 attached [2025-09-24 13:38:32.394] mtd24 attached [2025-09-24 13:38:32.410] mtd28 attached [2025-09-24 13:38:32.442] ubi0:dml_code is mounted. [2025-09-24 13:38:32.458] RTNETLINK answers: File exists [2025-09-24 13:38:32.513] ubi2:animations is mounted. [2025-09-24 13:38:32.513] ubi1:textures is mounted. [2025-09-24 13:38:32.513] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:38:32.513] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:38:32.513] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:38:32.513] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:38:32.513] data.LB_FadeInType0=100 [2025-09-24 13:38:32.513] data.CHLH_FadeInType0=0 [2025-09-24 13:38:32.513] data.WU_FadeInDelay=0 [2025-09-24 13:38:32.513] max_time_out=0 [2025-09-24 13:38:32.513] No splash screen [2025-09-24 13:38:32.513] stop dss Done [2025-09-24 13:38:32.513] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:38:32.545] /dev/mem opened. [2025-09-24 13:38:32.545] Memory mapped at address 0xffff9f81f000. [2025-09-24 13:38:32.590] Read at address 0x00600018 (0xffff9f81f018): 0x00000000 [2025-09-24 13:38:32.590] Write at address 0x00600018 (0xffff9f81f018): 0x00400040, readback 0x00400040 [2025-09-24 13:38:32.590] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:38:32.590] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:38:32.702] Loaded PowerVR consumer services. [2025-09-24 13:38:32.862] Waiting data available... [2025-09-24 13:38:32.878] 512+0 records in [2025-09-24 13:38:32.878] 512+0 records out [2025-09-24 13:38:32.910] Starting syslogd/klogd: done [2025-09-24 13:38:32.926] DML Start [2025-09-24 13:38:33.118] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:38:33.325] DML res1: 0 [2025-09-24 13:38:33.757] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:38:33.778] Read Success [2025-09-24 13:38:33.778] Verifying certificate... [2025-09-24 13:38:34.002] Verified OK [2025-09-24 13:38:34.002] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:38:35.597] Verified OK [2025-09-24 13:38:35.597] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:38:36.196] Verified OK [2025-09-24 13:38:36.196] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:38:38.817] fs.protected_hardlinks = 1 [2025-09-24 13:38:38.817] fs.protected_symlinks = 1 [2025-09-24 13:38:38.817] kernel.modules_disabled = 1 [2025-09-24 13:38:38.992] [2025-09-24 13:38:38.992] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:38:40.364] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:38:48.108] SBL1:1210.0.1.0 [2025-09-24 13:38:48.156] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:38:49.723] SBL2:1210.0.1.0 [2025-09-24 13:38:49.771] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:38:49.883] j-A [2025-09-24 13:38:57.254] The R5 Autosar Classic is running [2025-09-24 13:38:57.254] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:38:57.254] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:38:57.861] INIT: version 2.96 booting [2025-09-24 13:38:57.973] INIT: Entering runlevel: 5 [2025-09-24 13:38:58.133] mtd28 attached [2025-09-24 13:38:58.133] mtd24 attached [2025-09-24 13:38:58.149] mtd32 attached [2025-09-24 13:38:58.197] ubi0:animations is mounted. [2025-09-24 13:38:58.222] RTNETLINK answers: File exists [2025-09-24 13:38:58.222] ubi1:textures is mounted. [2025-09-24 13:38:58.222] ubi2:dml_code is mounted. [2025-09-24 13:38:58.222] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:38:58.258] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:38:58.258] data.LB_FadeInType0=100 [2025-09-24 13:38:58.258] data.CHLH_FadeInType0=0 [2025-09-24 13:38:58.258] data.WU_FadeInDelay=0 [2025-09-24 13:38:58.258] max_time_out=0 [2025-09-24 13:38:58.258] No splash screen [2025-09-24 13:38:58.258] stop dss Done [2025-09-24 13:38:58.258] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:38:58.258] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:38:58.273] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:38:58.311] /dev/mem opened. [2025-09-24 13:38:58.311] Memory mapped at address 0xffff854e6000. [2025-09-24 13:38:58.311] Read at address 0x00600018 (0xffff854e6018): 0x00000000 [2025-09-24 13:38:58.311] Write at address 0x00600018 (0xffff854e6018): 0x00400040, readback 0x00400040 [2025-09-24 13:38:58.359] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:38:58.375] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:38:58.487] Loaded PowerVR consumer services. [2025-09-24 13:38:58.615] Waiting data available... [2025-09-24 13:38:58.630] 512+0 records in [2025-09-24 13:38:58.630] 512+0 records out [2025-09-24 13:38:58.646] Starting syslogd/klogd: done [2025-09-24 13:38:58.678] DML Start [2025-09-24 13:38:58.854] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:38:59.094] DML res1: 0 [2025-09-24 13:38:59.537] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:38:59.537] Read Success [2025-09-24 13:38:59.537] Verifying certificate... [2025-09-24 13:38:59.793] Verified OK [2025-09-24 13:38:59.841] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:39:01.535] Verified OK [2025-09-24 13:39:01.552] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:39:02.101] Verified OK [2025-09-24 13:39:02.101] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:39:04.546] fs.protected_hardlinks = 1 [2025-09-24 13:39:04.573] fs.protected_symlinks = 1 [2025-09-24 13:39:04.573] kernel.modules_disabled = 1 [2025-09-24 13:39:04.749] [2025-09-24 13:39:04.749] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:39:06.104] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:39:13.834] SBL1:1210.0.1.0 [2025-09-24 13:39:13.866] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:39:15.449] SBL2:1210.0.1.0 [2025-09-24 13:39:15.481] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:39:15.593] j-A [2025-09-24 13:39:22.969] The R5 Autosar Classic is running [2025-09-24 13:39:22.969] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:39:22.969] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:39:23.577] INIT: version 2.96 booting [2025-09-24 13:39:23.688] INIT: Entering runlevel: 5 [2025-09-24 13:39:23.848] mtd24 attached [2025-09-24 13:39:23.848] mtd32 attached [2025-09-24 13:39:23.864] mtd28 attached [2025-09-24 13:39:23.912] ubi0:textures is mounted. [2025-09-24 13:39:23.912] RTNETLINK answers: File exists [2025-09-24 13:39:23.976] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:39:23.976] ubi1:dml_code is mounted. [2025-09-24 13:39:23.976] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:39:23.976] ubi2:animations is mounted. [2025-09-24 13:39:23.976] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:39:23.976] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:39:23.976] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:39:23.976] data.LB_FadeInType0=100 [2025-09-24 13:39:23.976] data.CHLH_FadeInType0=0 [2025-09-24 13:39:23.976] data.WU_FadeInDelay=0 [2025-09-24 13:39:23.976] max_time_out=0 [2025-09-24 13:39:23.976] No splash screen [2025-09-24 13:39:23.976] stop dss Done [2025-09-24 13:39:24.043] /dev/mem opened. [2025-09-24 13:39:24.043] Memory mapped at address 0xffff9a49c000. [2025-09-24 13:39:24.043] Read at address 0x00600018 (0xffff9a49c018): 0x00000000 [2025-09-24 13:39:24.043] Write at address 0x00600018 (0xffff9a49c018): 0x00400040, readback 0x00400040 [2025-09-24 13:39:24.059] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:39:24.074] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:39:24.186] Loaded PowerVR consumer services. [2025-09-24 13:39:24.315] Waiting data available... [2025-09-24 13:39:24.331] 512+0 records in [2025-09-24 13:39:24.347] 512+0 records out [2025-09-24 13:39:24.395] Starting syslogd/klogd: done [2025-09-24 13:39:24.411] DML Start [2025-09-24 13:39:24.554] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:39:24.810] DML res1: 0 [2025-09-24 13:39:25.221] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:39:25.221] Read Success [2025-09-24 13:39:25.221] Verifying certificate... [2025-09-24 13:39:25.508] Verified OK [2025-09-24 13:39:25.524] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:39:27.090] Verified OK [2025-09-24 13:39:27.090] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:39:27.731] Verified OK [2025-09-24 13:39:27.731] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:39:30.416] fs.protected_hardlinks = 1 [2025-09-24 13:39:30.416] fs.protected_symlinks = 1 [2025-09-24 13:39:30.432] kernel.modules_disabled = 1 [2025-09-24 13:39:30.624] [2025-09-24 13:39:30.624] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:39:31.836] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:39:39.570] SBL1:1210.0.1.0 [2025-09-24 13:39:39.618] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:39:41.185] SBL2:1210.0.1.0 [2025-09-24 13:39:41.233] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:39:41.344] j-A [2025-09-24 13:39:48.683] The R5 Autosar Classic is running [2025-09-24 13:39:48.708] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:39:48.708] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:39:49.316] INIT: version 2.96 booting [2025-09-24 13:39:49.427] INIT: Entering runlevel: 5 [2025-09-24 13:39:49.588] mtd28 attached [2025-09-24 13:39:49.604] mtd32 attached [2025-09-24 13:39:49.604] mtd24 attached [2025-09-24 13:39:49.652] ubi0:animations is mounted. [2025-09-24 13:39:49.652] RTNETLINK answers: File exists [2025-09-24 13:39:49.714] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:39:49.714] ubi1:dml_code is mounted. [2025-09-24 13:39:49.714] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:39:49.714] ubi2:textures is mounted. [2025-09-24 13:39:49.714] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:39:49.714] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:39:49.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:39:49.714] data.LB_FadeInType0=100 [2025-09-24 13:39:49.714] data.CHLH_FadeInType0=0 [2025-09-24 13:39:49.714] data.WU_FadeInDelay=0 [2025-09-24 13:39:49.714] max_time_out=0 [2025-09-24 13:39:49.714] No splash screen [2025-09-24 13:39:49.714] stop dss Done [2025-09-24 13:39:49.747] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:39:49.783] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:39:49.783] /dev/mem opened. [2025-09-24 13:39:49.783] Memory mapped at address 0xffff953cf000. [2025-09-24 13:39:49.783] Read at address 0x00600018 (0xffff953cf018): 0x00000000 [2025-09-24 13:39:49.783] Write at address 0x00600018 (0xffff953cf018): 0x00400040, readback 0x00400040 [2025-09-24 13:39:49.910] Loaded PowerVR consumer services. [2025-09-24 13:39:50.054] Waiting data available... [2025-09-24 13:39:50.087] 512+0 records in [2025-09-24 13:39:50.087] 512+0 records out [2025-09-24 13:39:50.103] Starting syslogd/klogd: done [2025-09-24 13:39:50.135] DML Start [2025-09-24 13:39:50.310] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:39:50.518] DML res1: 0 [2025-09-24 13:39:50.950] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:39:50.971] Read Success [2025-09-24 13:39:50.971] Verifying certificate... [2025-09-24 13:39:51.242] Verified OK [2025-09-24 13:39:51.259] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:39:52.915] Verified OK [2025-09-24 13:39:52.915] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:39:53.490] Verified OK [2025-09-24 13:39:53.490] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:39:56.065] fs.protected_hardlinks = 1 [2025-09-24 13:39:56.065] fs.protected_symlinks = 1 [2025-09-24 13:39:56.080] kernel.modules_disabled = 1 [2025-09-24 13:39:56.257] [2025-09-24 13:39:56.257] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:39:57.561] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:40:05.301] SBL1:1210.0.1.0 [2025-09-24 13:40:05.349] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:40:06.915] SBL2:1210.0.1.0 [2025-09-24 13:40:06.963] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:40:07.075] j-A [2025-09-24 13:40:14.414] The R5 Autosar Classic is running [2025-09-24 13:40:14.445] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:40:14.445] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:40:15.053] INIT: version 2.96 booting [2025-09-24 13:40:15.165] INIT: Entering runlevel: 5 [2025-09-24 13:40:15.308] mtd24 attached [2025-09-24 13:40:15.324] mtd28 attached [2025-09-24 13:40:15.340] mtd32 attached [2025-09-24 13:40:15.372] ubi1:animations is mounted. [2025-09-24 13:40:15.426] RTNETLINK answers: File exists [2025-09-24 13:40:15.426] ubi0:textures is mounted. [2025-09-24 13:40:15.426] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:40:15.426] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:40:15.426] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:40:15.426] ubi2:dml_code is mounted. [2025-09-24 13:40:15.426] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:40:15.426] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:40:15.451] data.LB_FadeInType0=100 [2025-09-24 13:40:15.451] data.CHLH_FadeInType0=0 [2025-09-24 13:40:15.451] data.WU_FadeInDelay=0 [2025-09-24 13:40:15.451] max_time_out=0 [2025-09-24 13:40:15.451] No splash screen [2025-09-24 13:40:15.451] stop dss Done [2025-09-24 13:40:15.531] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:40:15.531] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:40:15.531] /dev/mem opened. [2025-09-24 13:40:15.531] Memory mapped at address 0xffff8487a000. [2025-09-24 13:40:15.531] Read at address 0x00600018 (0xffff8487a018): 0x00000000 [2025-09-24 13:40:15.531] Write at address 0x00600018 (0xffff8487a018): 0x00400040, readback 0x00400040 [2025-09-24 13:40:15.627] Loaded PowerVR consumer services. [2025-09-24 13:40:15.803] Waiting data available... [2025-09-24 13:40:15.835] 512+0 records in [2025-09-24 13:40:15.835] 512+0 records out [2025-09-24 13:40:15.867] Starting syslogd/klogd: done [2025-09-24 13:40:15.883] DML Start [2025-09-24 13:40:16.043] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:40:16.251] DML res1: 0 [2025-09-24 13:40:16.818] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:40:16.818] Read Success [2025-09-24 13:40:16.818] Verifying certificate... [2025-09-24 13:40:17.122] Verified OK [2025-09-24 13:40:17.138] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:40:18.870] Verified OK [2025-09-24 13:40:18.870] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:40:19.349] Verified OK [2025-09-24 13:40:19.349] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:40:21.796] fs.protected_hardlinks = 1 [2025-09-24 13:40:21.796] fs.protected_symlinks = 1 [2025-09-24 13:40:21.812] kernel.modules_disabled = 1 [2025-09-24 13:40:22.003] [2025-09-24 13:40:22.003] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:40:23.314] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:40:31.025] SBL1:1210.0.1.0 [2025-09-24 13:40:31.057] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:40:32.640] SBL2:1210.0.1.0 [2025-09-24 13:40:32.688] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:40:32.784] j-A [2025-09-24 13:40:40.138] The R5 Autosar Classic is running [2025-09-24 13:40:40.138] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:40:40.159] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:40:40.766] INIT: version 2.96 booting [2025-09-24 13:40:40.879] INIT: Entering runlevel: 5 [2025-09-24 13:40:41.039] mtd24 attached [2025-09-24 13:40:41.054] mtd32 attached [2025-09-24 13:40:41.054] mtd28 attached [2025-09-24 13:40:41.070] ubi0:textures is mounted. [2025-09-24 13:40:41.102] RTNETLINK answers: File exists [2025-09-24 13:40:41.118] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:40:41.174] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:40:41.174] ubi2:animations is mounted. [2025-09-24 13:40:41.174] ubi1:dml_code is mounted. [2025-09-24 13:40:41.174] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:40:41.174] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:40:41.174] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:40:41.174] data.LB_FadeInType0=100 [2025-09-24 13:40:41.174] data.CHLH_FadeInType0=0 [2025-09-24 13:40:41.174] data.WU_FadeInDelay=0 [2025-09-24 13:40:41.174] max_time_out=0 [2025-09-24 13:40:41.174] No splash screen [2025-09-24 13:40:41.174] stop dss Done [2025-09-24 13:40:41.206] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:40:41.247] /dev/mem opened. [2025-09-24 13:40:41.247] Memory mapped at address 0xffff82936000. [2025-09-24 13:40:41.247] Read at address 0x00600018 (0xffff82936018): 0x00000000 [2025-09-24 13:40:41.247] Write at address 0x00600018 (0xffff82936018): 0x00400040, readback 0x00400040 [2025-09-24 13:40:41.247] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:40:41.392] Loaded PowerVR consumer services. [2025-09-24 13:40:41.519] Waiting data available... [2025-09-24 13:40:41.535] 512+0 records in [2025-09-24 13:40:41.535] 512+0 records out [2025-09-24 13:40:41.551] Starting syslogd/klogd: done [2025-09-24 13:40:41.583] DML Start [2025-09-24 13:40:41.759] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:40:41.950] DML res1: 0 [2025-09-24 13:40:42.470] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:40:42.470] Read Success [2025-09-24 13:40:42.470] Verifying certificate... [2025-09-24 13:40:42.694] Verified OK [2025-09-24 13:40:42.710] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:40:44.260] Verified OK [2025-09-24 13:40:44.277] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:40:44.895] Verified OK [2025-09-24 13:40:44.895] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:40:47.613] fs.protected_hardlinks = 1 [2025-09-24 13:40:47.629] fs.protected_symlinks = 1 [2025-09-24 13:40:47.629] kernel.modules_disabled = 1 [2025-09-24 13:40:47.820] [2025-09-24 13:40:47.820] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:40:48.971] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:40:56.775] SBL1:1210.0.1.0 [2025-09-24 13:40:56.807] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:40:58.390] SBL2:1210.0.1.0 [2025-09-24 13:40:58.422] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:40:58.534] j-A [2025-09-24 13:41:05.888] The R5 Autosar Classic is running [2025-09-24 13:41:05.888] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:41:05.909] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:41:06.516] INIT: version 2.96 booting [2025-09-24 13:41:06.629] INIT: Entering runlevel: 5 [2025-09-24 13:41:06.772] mtd24 attached [2025-09-24 13:41:06.788] mtd28 attached [2025-09-24 13:41:06.804] mtd32 attached [2025-09-24 13:41:06.820] ubi0:textures is mounted. [2025-09-24 13:41:06.836] ubi1:animations is mounted. [2025-09-24 13:41:06.852] RTNETLINK answers: File exists [2025-09-24 13:41:06.906] ubi2:dml_code is mounted. [2025-09-24 13:41:06.906] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:41:06.906] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:41:06.906] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:41:06.906] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:41:06.906] data.LB_FadeInType0=100 [2025-09-24 13:41:06.906] data.CHLH_FadeInType0=0 [2025-09-24 13:41:06.906] data.WU_FadeInDelay=0 [2025-09-24 13:41:06.906] max_time_out=0 [2025-09-24 13:41:06.906] No splash screen [2025-09-24 13:41:06.906] stop dss Done [2025-09-24 13:41:06.906] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:41:06.938] /dev/mem opened. [2025-09-24 13:41:06.970] Memory mapped at address 0xffffa31ef000. [2025-09-24 13:41:06.970] Read at address 0x00600018 (0xffffa31ef018): 0x00000000 [2025-09-24 13:41:06.970] Write at address 0x00600018 (0xffffa31ef018): 0x00400040, readback 0x00400040 [2025-09-24 13:41:06.970] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:41:06.986] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:41:07.082] Loaded PowerVR consumer services. [2025-09-24 13:41:07.242] Waiting data available... [2025-09-24 13:41:07.258] 512+0 records in [2025-09-24 13:41:07.258] 512+0 records out [2025-09-24 13:41:07.306] Starting syslogd/klogd: done [2025-09-24 13:41:07.322] DML Start [2025-09-24 13:41:07.481] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:41:07.722] DML res1: 0 [2025-09-24 13:41:08.103] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:41:08.103] Read Success [2025-09-24 13:41:08.103] Verifying certificate... [2025-09-24 13:41:08.344] Verified OK [2025-09-24 13:41:08.359] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:41:10.113] Verified OK [2025-09-24 13:41:10.113] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:41:10.687] Verified OK [2025-09-24 13:41:10.687] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:41:13.229] fs.protected_hardlinks = 1 [2025-09-24 13:41:13.229] fs.protected_symlinks = 1 [2025-09-24 13:41:13.245] kernel.modules_disabled = 1 [2025-09-24 13:41:13.437] [2025-09-24 13:41:13.437] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:41:14.748] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:41:22.506] SBL1:1210.0.1.0 [2025-09-24 13:41:22.554] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:41:24.136] SBL2:1210.0.1.0 [2025-09-24 13:41:24.168] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:41:24.280] j-A [2025-09-24 13:41:31.653] The R5 Autosar Classic is running [2025-09-24 13:41:31.653] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:41:31.653] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:41:32.260] INIT: version 2.96 booting [2025-09-24 13:41:32.372] INIT: Entering runlevel: 5 [2025-09-24 13:41:32.532] mtd28 attached [2025-09-24 13:41:32.532] mtd24 attached [2025-09-24 13:41:32.548] mtd32 attached [2025-09-24 13:41:32.596] ubi0:animations is mounted. [2025-09-24 13:41:32.596] ubi1:textures is mounted. [2025-09-24 13:41:32.660] RTNETLINK answers: File exists [2025-09-24 13:41:32.660] ubi2:dml_code is mounted. [2025-09-24 13:41:32.660] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:41:32.660] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:41:32.660] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:41:32.660] data.LB_FadeInType0=100 [2025-09-24 13:41:32.660] data.CHLH_FadeInType0=0 [2025-09-24 13:41:32.660] data.WU_FadeInDelay=0 [2025-09-24 13:41:32.660] max_time_out=0 [2025-09-24 13:41:32.660] No splash screen [2025-09-24 13:41:32.660] stop dss Done [2025-09-24 13:41:32.660] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:41:32.660] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:41:32.725] /dev/mem opened. [2025-09-24 13:41:32.725] Memory mapped at address 0xffff88355000. [2025-09-24 13:41:32.725] Read at address 0x00600018 (0xffff88355018): 0x00000000 [2025-09-24 13:41:32.725] Write at address 0x00600018 (0xffff88355018): 0x00400040, readback 0x00400040 [2025-09-24 13:41:32.764] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:41:32.764] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:41:32.844] Loaded PowerVR consumer services. [2025-09-24 13:41:33.020] Waiting data available... [2025-09-24 13:41:33.020] 512+0 records in [2025-09-24 13:41:33.036] 512+0 records out [2025-09-24 13:41:33.084] Starting syslogd/klogd: done [2025-09-24 13:41:33.100] DML Start [2025-09-24 13:41:33.291] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:41:33.515] DML res1: 0 [2025-09-24 13:41:33.961] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:41:33.961] Read Success [2025-09-24 13:41:33.961] Verifying certificate... [2025-09-24 13:41:34.185] Verified OK [2025-09-24 13:41:34.201] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:41:35.848] Verified OK [2025-09-24 13:41:35.848] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:41:36.462] Verified OK [2025-09-24 13:41:36.462] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:41:39.164] fs.protected_hardlinks = 1 [2025-09-24 13:41:39.164] fs.protected_symlinks = 1 [2025-09-24 13:41:39.180] kernel.modules_disabled = 1 [2025-09-24 13:41:39.372] [2025-09-24 13:41:39.372] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:41:40.512] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:41:48.282] SBL1:1210.0.1.0 [2025-09-24 13:41:48.314] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:41:49.896] SBL2:1210.0.1.0 [2025-09-24 13:41:49.928] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:41:50.040] j-A [2025-09-24 13:41:57.394] The R5 Autosar Classic is running [2025-09-24 13:41:57.394] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:41:57.415] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:41:58.022] INIT: version 2.96 booting [2025-09-24 13:41:58.133] INIT: Entering runlevel: 5 [2025-09-24 13:41:58.294] mtd28 attached [2025-09-24 13:41:58.310] mtd32 attached [2025-09-24 13:41:58.310] mtd24 attached [2025-09-24 13:41:58.394] ubi0:animations is mounted. [2025-09-24 13:41:58.394] RTNETLINK answers: File exists [2025-09-24 13:41:58.394] ubi1:dml_code is mounted. [2025-09-24 13:41:58.394] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:41:58.394] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:41:58.394] ubi2:textures is mounted. [2025-09-24 13:41:58.394] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:41:58.394] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:41:58.394] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:41:58.418] data.LB_FadeInType0=100 [2025-09-24 13:41:58.418] data.CHLH_FadeInType0=0 [2025-09-24 13:41:58.418] data.WU_FadeInDelay=0 [2025-09-24 13:41:58.418] max_time_out=0 [2025-09-24 13:41:58.418] No splash screen [2025-09-24 13:41:58.418] stop dss Done [2025-09-24 13:41:58.433] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:41:58.449] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:41:58.488] /dev/mem opened. [2025-09-24 13:41:58.488] Memory mapped at address 0xffffb4184000. [2025-09-24 13:41:58.488] Read at address 0x00600018 (0xffffb4184018): 0x00000000 [2025-09-24 13:41:58.488] Write at address 0x00600018 (0xffffb4184018): 0x00400040, readback 0x00400040 [2025-09-24 13:41:58.665] Loaded PowerVR consumer services. [2025-09-24 13:41:58.760] Waiting data available... [2025-09-24 13:41:58.792] 512+0 records in [2025-09-24 13:41:58.792] 512+0 records out [2025-09-24 13:41:58.840] Starting syslogd/klogd: done [2025-09-24 13:41:58.856] DML Start [2025-09-24 13:41:59.001] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:41:59.240] DML res1: 0 [2025-09-24 13:41:59.688] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:41:59.688] Read Success [2025-09-24 13:41:59.704] Verifying certificate... [2025-09-24 13:41:59.943] Verified OK [2025-09-24 13:41:59.959] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:42:01.830] Verified OK [2025-09-24 13:42:01.830] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:42:02.315] Verified OK [2025-09-24 13:42:02.315] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:42:04.806] fs.protected_hardlinks = 1 [2025-09-24 13:42:04.806] fs.protected_symlinks = 1 [2025-09-24 13:42:04.806] kernel.modules_disabled = 1 [2025-09-24 13:42:04.998] [2025-09-24 13:42:04.998] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:42:06.271] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:42:14.010] SBL1:1210.0.1.0 [2025-09-24 13:42:14.058] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:42:15.624] SBL2:1210.0.1.0 [2025-09-24 13:42:15.672] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 13:42:15.784] j-A [2025-09-24 13:42:23.154] The R5 Autosar Classic is running [2025-09-24 13:42:23.154] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:42:23.154] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:42:23.762] INIT: version 2.96 booting [2025-09-24 13:42:23.857] INIT: Entering runlevel: 5 [2025-09-24 13:42:24.018] mtd28 attached [2025-09-24 13:42:24.034] mtd24 attached [2025-09-24 13:42:24.049] mtd32 attached [2025-09-24 13:42:24.081] ubi0:animations is mounted. [2025-09-24 13:42:24.097] RTNETLINK answers: File exists [2025-09-24 13:42:24.097] ubi1:textures is mounted. [2025-09-24 13:42:24.154] ubi2:dml_code is mounted. [2025-09-24 13:42:24.154] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:42:24.154] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:42:24.154] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:42:24.154] data.LB_FadeInType0=100 [2025-09-24 13:42:24.154] data.CHLH_FadeInType0=0 [2025-09-24 13:42:24.154] data.WU_FadeInDelay=0 [2025-09-24 13:42:24.154] max_time_out=0 [2025-09-24 13:42:24.154] No splash screen [2025-09-24 13:42:24.154] stop dss Done [2025-09-24 13:42:24.154] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:42:24.154] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:42:24.202] /dev/mem opened. [2025-09-24 13:42:24.202] Memory mapped at address 0xffff96d4f000. [2025-09-24 13:42:24.241] Read at address 0x00600018 (0xffff96d4f018): 0x00000000 [2025-09-24 13:42:24.241] Write at address 0x00600018 (0xffff96d4f018): 0x00400040, readback 0x00400040 [2025-09-24 13:42:24.241] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:42:24.241] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:42:24.386] Loaded PowerVR consumer services. [2025-09-24 13:42:24.514] Waiting data available... [2025-09-24 13:42:24.529] 512+0 records in [2025-09-24 13:42:24.529] 512+0 records out [2025-09-24 13:42:24.561] Starting syslogd/klogd: done [2025-09-24 13:42:24.577] DML Start [2025-09-24 13:42:24.754] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:42:25.009] DML res1: 0 [2025-09-24 13:42:25.393] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:42:25.414] Read Success [2025-09-24 13:42:25.414] Verifying certificate... [2025-09-24 13:42:25.621] Verified OK [2025-09-24 13:42:25.653] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:42:27.341] Verified OK [2025-09-24 13:42:27.341] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:42:27.948] Verified OK [2025-09-24 13:42:27.948] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:42:30.553] fs.protected_hardlinks = 1 [2025-09-24 13:42:30.553] fs.protected_symlinks = 1 [2025-09-24 13:42:30.569] kernel.modules_disabled = 1 [2025-09-24 13:42:30.761] [2025-09-24 13:42:30.761] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:42:32.031] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:42:39.754] SBL1:1210.0.1.0 [2025-09-24 13:42:39.802] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:42:41.369] SBL2:1210.0.1.0 [2025-09-24 13:42:41.417] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:42:41.513] j-A [2025-09-24 13:42:48.867] The R5 Autosar Classic is running [2025-09-24 13:42:48.890] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:42:48.890] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:42:49.499] INIT: version 2.96 booting [2025-09-24 13:42:49.610] INIT: Entering runlevel: 5 [2025-09-24 13:42:49.770] mtd28 attached [2025-09-24 13:42:49.770] mtd24 attached [2025-09-24 13:42:49.786] mtd32 attached [2025-09-24 13:42:49.818] ubi0:animations is mounted. [2025-09-24 13:42:49.834] ubi1:textures is mounted. [2025-09-24 13:42:49.902] RTNETLINK answers: File exists [2025-09-24 13:42:49.902] ubi2:dml_code is mounted. [2025-09-24 13:42:49.902] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:42:49.902] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:42:49.902] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:42:49.902] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:42:49.902] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:42:49.902] data.LB_FadeInType0=100 [2025-09-24 13:42:49.902] data.CHLH_FadeInType0=0 [2025-09-24 13:42:49.902] data.WU_FadeInDelay=0 [2025-09-24 13:42:49.902] max_time_out=0 [2025-09-24 13:42:49.902] No splash screen [2025-09-24 13:42:49.902] stop dss Done [2025-09-24 13:42:49.934] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:42:49.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:42:49.990] /dev/mem opened. [2025-09-24 13:42:49.990] Memory mapped at address 0xffff992b9000. [2025-09-24 13:42:49.990] Read at address 0x00600018 (0xffff992b9018): 0x00000000 [2025-09-24 13:42:49.990] Write at address 0x00600018 (0xffff992b9018): 0x00400040, readback 0x00400040 [2025-09-24 13:42:50.054] Loaded PowerVR consumer services. [2025-09-24 13:42:50.246] Waiting data available... [2025-09-24 13:42:50.262] 512+0 records in [2025-09-24 13:42:50.262] 512+0 records out [2025-09-24 13:42:50.309] Starting syslogd/klogd: done [2025-09-24 13:42:50.325] DML Start [2025-09-24 13:42:50.565] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:42:50.773] DML res1: 0 [2025-09-24 13:42:51.147] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:42:51.147] Read Success [2025-09-24 13:42:51.147] Verifying certificate... [2025-09-24 13:42:51.419] Verified OK [2025-09-24 13:42:51.435] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:42:53.209] Verified OK [2025-09-24 13:42:53.209] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:42:53.781] Verified OK [2025-09-24 13:42:53.781] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:42:56.338] fs.protected_hardlinks = 1 [2025-09-24 13:42:56.338] fs.protected_symlinks = 1 [2025-09-24 13:42:56.355] kernel.modules_disabled = 1 [2025-09-24 13:42:56.546] [2025-09-24 13:42:56.546] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:42:57.816] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:43:05.484] SBL1:1210.0.1.0 [2025-09-24 13:43:05.532] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:43:07.099] SBL2:1210.0.1.0 [2025-09-24 13:43:07.147] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:43:07.259] j-A [2025-09-24 13:43:14.629] The R5 Autosar Classic is running [2025-09-24 13:43:14.629] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:43:14.629] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:43:15.237] INIT: version 2.96 booting [2025-09-24 13:43:15.348] INIT: Entering runlevel: 5 [2025-09-24 13:43:15.509] mtd28 attached [2025-09-24 13:43:15.509] mtd24 attached [2025-09-24 13:43:15.525] mtd32 attached [2025-09-24 13:43:15.573] ubi0:animations is mounted. [2025-09-24 13:43:15.639] ubi1:textures is mounted. [2025-09-24 13:43:15.639] RTNETLINK answers: File exists [2025-09-24 13:43:15.639] ubi2:dml_code is mounted. [2025-09-24 13:43:15.639] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:43:15.639] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:43:15.639] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:43:15.639] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:43:15.639] data.LB_FadeInType0=100 [2025-09-24 13:43:15.639] data.CHLH_FadeInType0=0 [2025-09-24 13:43:15.639] data.WU_FadeInDelay=0 [2025-09-24 13:43:15.639] max_time_out=0 [2025-09-24 13:43:15.639] No splash screen [2025-09-24 13:43:15.639] stop dss Done [2025-09-24 13:43:15.639] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:43:15.693] /dev/mem opened. [2025-09-24 13:43:15.693] Memory mapped at address 0xffffa2c9c000. [2025-09-24 13:43:15.693] Read at address 0x00600018 (0xffffa2c9c018): 0x00000000 [2025-09-24 13:43:15.693] Write at address 0x00600018 (0xffffa2c9c018): 0x00400040, readback 0x00400040 [2025-09-24 13:43:15.693] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:43:15.709] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:43:15.932] Loaded PowerVR consumer services. [2025-09-24 13:43:15.996] Waiting data available... [2025-09-24 13:43:16.028] 512+0 records in [2025-09-24 13:43:16.028] 512+0 records out [2025-09-24 13:43:16.076] Starting syslogd/klogd: done [2025-09-24 13:43:16.092] DML Start [2025-09-24 13:43:16.268] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:43:16.508] DML res1: 0 [2025-09-24 13:43:16.881] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:43:16.881] Read Success [2025-09-24 13:43:16.881] Verifying certificate... [2025-09-24 13:43:17.152] Verified OK [2025-09-24 13:43:17.152] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:43:18.847] Verified OK [2025-09-24 13:43:18.847] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:43:19.477] Verified OK [2025-09-24 13:43:19.477] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:43:22.084] fs.protected_hardlinks = 1 [2025-09-24 13:43:22.099] fs.protected_symlinks = 1 [2025-09-24 13:43:22.099] kernel.modules_disabled = 1 [2025-09-24 13:43:22.290] [2025-09-24 13:43:22.290] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:43:23.522] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:43:31.202] SBL1:1210.0.1.0 [2025-09-24 13:43:31.250] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:43:32.816] SBL2:1210.0.1.0 [2025-09-24 13:43:32.864] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:43:32.976] j-A [2025-09-24 13:43:40.347] The R5 Autosar Classic is running [2025-09-24 13:43:40.347] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:43:40.347] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:43:40.954] INIT: version 2.96 booting [2025-09-24 13:43:41.066] INIT: Entering runlevel: 5 [2025-09-24 13:43:41.209] mtd28 attached [2025-09-24 13:43:41.225] mtd24 attached [2025-09-24 13:43:41.241] mtd32 attached [2025-09-24 13:43:41.346] ubi0:animations is mounted. [2025-09-24 13:43:41.346] RTNETLINK answers: File exists [2025-09-24 13:43:41.346] ubi1:textures is mounted. [2025-09-24 13:43:41.346] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:43:41.346] ubi2:dml_code is mounted. [2025-09-24 13:43:41.346] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:43:41.346] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:43:41.346] data.LB_FadeInType0=100 [2025-09-24 13:43:41.346] data.CHLH_FadeInType0=0 [2025-09-24 13:43:41.346] data.WU_FadeInDelay=0 [2025-09-24 13:43:41.346] max_time_out=0 [2025-09-24 13:43:41.346] No splash screen [2025-09-24 13:43:41.346] stop dss Done [2025-09-24 13:43:41.346] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:43:41.346] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:43:41.419] /dev/mem opened. [2025-09-24 13:43:41.419] Memory mapped at address 0xffff94394000. [2025-09-24 13:43:41.419] Read at address 0x00600018 (0xffff94394018): 0x00000000 [2025-09-24 13:43:41.419] Write at address 0x00600018 (0xffff94394018): 0x00400040, readback 0x00400040 [2025-09-24 13:43:41.466] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:43:41.482] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:43:41.643] Loaded PowerVR consumer services. [2025-09-24 13:43:41.722] Waiting data available... [2025-09-24 13:43:41.754] 512+0 records in [2025-09-24 13:43:41.754] 512+0 records out [2025-09-24 13:43:41.786] Starting syslogd/klogd: done [2025-09-24 13:43:41.802] DML Start [2025-09-24 13:43:41.962] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:43:42.170] DML res1: 0 [2025-09-24 13:43:42.601] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:43:42.617] Read Success [2025-09-24 13:43:42.617] Verifying certificate... [2025-09-24 13:43:42.841] Verified OK [2025-09-24 13:43:42.857] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:43:44.501] Verified OK [2025-09-24 13:43:44.501] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:43:45.116] Verified OK [2025-09-24 13:43:45.116] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:43:47.769] fs.protected_hardlinks = 1 [2025-09-24 13:43:47.785] fs.protected_symlinks = 1 [2025-09-24 13:43:47.785] kernel.modules_disabled = 1 [2025-09-24 13:43:47.977] [2025-09-24 13:43:47.977] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:43:49.208] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:43:57.000] SBL1:1210.0.1.0 [2025-09-24 13:43:57.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:43:58.614] SBL2:1210.0.1.0 [2025-09-24 13:43:58.662] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:43:58.758] j-A [2025-09-24 13:44:06.113] The R5 Autosar Classic is running [2025-09-24 13:44:06.136] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:44:06.136] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:44:06.743] INIT: version 2.96 booting [2025-09-24 13:44:06.855] INIT: Entering runlevel: 5 [2025-09-24 13:44:07.015] mtd28 attached [2025-09-24 13:44:07.031] mtd24 attached [2025-09-24 13:44:07.047] mtd32 attached [2025-09-24 13:44:07.150] RTNETLINK answers: File exists [2025-09-24 13:44:07.150] ubi0:animations is mounted. [2025-09-24 13:44:07.150] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:44:07.150] ubi1:textures is mounted. [2025-09-24 13:44:07.150] ubi2:dml_code is mounted. [2025-09-24 13:44:07.150] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:44:07.150] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:44:07.150] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:44:07.150] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:44:07.150] data.LB_FadeInType0=100 [2025-09-24 13:44:07.150] data.CHLH_FadeInType0=0 [2025-09-24 13:44:07.150] data.WU_FadeInDelay=0 [2025-09-24 13:44:07.150] max_time_out=0 [2025-09-24 13:44:07.150] No splash screen [2025-09-24 13:44:07.150] stop dss Done [2025-09-24 13:44:07.220] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:44:07.220] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:44:07.220] /dev/mem opened. [2025-09-24 13:44:07.220] Memory mapped at address 0xffffbb3cf000. [2025-09-24 13:44:07.220] Read at address 0x00600018 (0xffffbb3cf018): 0x00000000 [2025-09-24 13:44:07.220] Write at address 0x00600018 (0xffffbb3cf018): 0x00400040, readback 0x00400040 [2025-09-24 13:44:07.316] Loaded PowerVR consumer services. [2025-09-24 13:44:07.493] Waiting data available... [2025-09-24 13:44:07.525] 512+0 records in [2025-09-24 13:44:07.525] 512+0 records out [2025-09-24 13:44:07.556] Starting syslogd/klogd: done [2025-09-24 13:44:07.588] DML Start [2025-09-24 13:44:07.749] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:44:07.988] DML res1: 0 [2025-09-24 13:44:08.419] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:44:08.419] Read Success [2025-09-24 13:44:08.419] Verifying certificate... [2025-09-24 13:44:08.658] Verified OK [2025-09-24 13:44:08.674] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:44:10.237] Verified OK [2025-09-24 13:44:10.237] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:44:10.876] Verified OK [2025-09-24 13:44:10.892] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:44:13.529] fs.protected_hardlinks = 1 [2025-09-24 13:44:13.530] fs.protected_symlinks = 1 [2025-09-24 13:44:13.546] kernel.modules_disabled = 1 [2025-09-24 13:44:13.737] [2025-09-24 13:44:13.737] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:44:15.010] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:44:22.740] SBL1:1210.0.1.0 [2025-09-24 13:44:22.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:44:24.355] SBL2:1210.0.1.0 [2025-09-24 13:44:24.403] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:44:24.498] j-A [2025-09-24 13:44:31.853] The R5 Autosar Classic is running [2025-09-24 13:44:31.878] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:44:31.878] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:44:32.486] INIT: version 2.96 booting [2025-09-24 13:44:32.598] INIT: Entering runlevel: 5 [2025-09-24 13:44:32.742] mtd24 attached [2025-09-24 13:44:32.758] mtd28 attached [2025-09-24 13:44:32.774] mtd32 attached [2025-09-24 13:44:32.856] ubi0:textures is mounted. [2025-09-24 13:44:32.856] RTNETLINK answers: File exists [2025-09-24 13:44:32.856] ubi1:animations is mounted. [2025-09-24 13:44:32.856] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:44:32.856] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:44:32.856] ubi2:dml_code is mounted. [2025-09-24 13:44:32.856] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:44:32.856] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:44:32.856] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:44:32.880] data.LB_FadeInType0=100 [2025-09-24 13:44:32.880] data.CHLH_FadeInType0=0 [2025-09-24 13:44:32.880] data.WU_FadeInDelay=0 [2025-09-24 13:44:32.880] max_time_out=0 [2025-09-24 13:44:32.880] No splash screen [2025-09-24 13:44:32.880] stop dss Done [2025-09-24 13:44:32.928] /dev/mem opened. [2025-09-24 13:44:32.968] Memory mapped at address 0xffff84cb9000. [2025-09-24 13:44:32.968] Read at address 0x00600018 (0xffff84cb9018): 0x00000000 [2025-09-24 13:44:32.968] Write at address 0x00600018 (0xffff84cb9018): 0x00400040, readback 0x00400040 [2025-09-24 13:44:32.968] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:44:32.968] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:44:33.095] Loaded PowerVR consumer services. [2025-09-24 13:44:33.223] Waiting data available... [2025-09-24 13:44:33.256] 512+0 records in [2025-09-24 13:44:33.256] 512+0 records out [2025-09-24 13:44:33.304] Starting syslogd/klogd: done [2025-09-24 13:44:33.320] DML Start [2025-09-24 13:44:33.512] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:44:33.703] DML res1: 0 [2025-09-24 13:44:34.135] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:44:34.156] Read Success [2025-09-24 13:44:34.156] Verifying certificate... [2025-09-24 13:44:34.444] Verified OK [2025-09-24 13:44:34.460] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:44:36.239] Verified OK [2025-09-24 13:44:36.239] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:44:36.734] Verified OK [2025-09-24 13:44:36.734] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:44:39.149] fs.protected_hardlinks = 1 [2025-09-24 13:44:39.165] fs.protected_symlinks = 1 [2025-09-24 13:44:39.165] kernel.modules_disabled = 1 [2025-09-24 13:44:39.373] [2025-09-24 13:44:39.373] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:44:40.758] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:44:48.476] SBL1:1210.0.1.0 [2025-09-24 13:44:48.525] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:44:50.091] SBL2:1210.0.1.0 [2025-09-24 13:44:50.138] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:44:50.250] j-A [2025-09-24 13:44:57.623] The R5 Autosar Classic is running [2025-09-24 13:44:57.623] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:44:57.623] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:44:58.230] INIT: version 2.96 booting [2025-09-24 13:44:58.342] INIT: Entering runlevel: 5 [2025-09-24 13:44:58.487] mtd24 attached [2025-09-24 13:44:58.502] mtd32 attached [2025-09-24 13:44:58.534] mtd28 attached [2025-09-24 13:44:58.534] ubi0:textures is mounted. [2025-09-24 13:44:58.550] ubi1:dml_code is mounted. [2025-09-24 13:44:58.624] RTNETLINK answers: File exists [2025-09-24 13:44:58.624] ubi2:animations is mounted. [2025-09-24 13:44:58.624] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:44:58.624] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:44:58.624] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:44:58.624] data.LB_FadeInType0=100 [2025-09-24 13:44:58.624] data.CHLH_FadeInType0=0 [2025-09-24 13:44:58.624] data.WU_FadeInDelay=0 [2025-09-24 13:44:58.624] max_time_out=0 [2025-09-24 13:44:58.624] No splash screen [2025-09-24 13:44:58.624] stop dss Done [2025-09-24 13:44:58.624] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:44:58.624] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:44:58.655] /dev/mem opened. [2025-09-24 13:44:58.681] Memory mapped at address 0xffff85a7f000. [2025-09-24 13:44:58.681] Read at address 0x00600018 (0xffff85a7f018): 0x00000000 [2025-09-24 13:44:58.681] Write at address 0x00600018 (0xffff85a7f018): 0x00400040, readback 0x00400040 [2025-09-24 13:44:58.712] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:44:58.712] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:44:58.840] Loaded PowerVR consumer services. [2025-09-24 13:44:58.968] Waiting data available... [2025-09-24 13:44:59.000] 512+0 records in [2025-09-24 13:44:59.000] 512+0 records out [2025-09-24 13:44:59.032] Starting syslogd/klogd: done [2025-09-24 13:44:59.048] DML Start [2025-09-24 13:44:59.240] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:44:59.416] DML res1: 0 [2025-09-24 13:44:59.879] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:44:59.895] Read Success [2025-09-24 13:44:59.895] Verifying certificate... [2025-09-24 13:45:00.135] Verified OK [2025-09-24 13:45:00.151] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:45:01.862] Verified OK [2025-09-24 13:45:01.862] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:45:02.453] Verified OK [2025-09-24 13:45:02.453] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:45:05.027] fs.protected_hardlinks = 1 [2025-09-24 13:45:05.027] fs.protected_symlinks = 1 [2025-09-24 13:45:05.043] kernel.modules_disabled = 1 [2025-09-24 13:45:05.235] [2025-09-24 13:45:05.235] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:45:06.478] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:45:14.224] SBL1:1210.0.1.0 [2025-09-24 13:45:14.272] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:45:15.838] SBL2:1210.0.1.0 [2025-09-24 13:45:15.886] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:45:15.999] j-A [2025-09-24 13:45:23.338] The R5 Autosar Classic is running [2025-09-24 13:45:23.369] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:45:23.369] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:45:23.976] INIT: version 2.96 booting [2025-09-24 13:45:24.088] INIT: Entering runlevel: 5 [2025-09-24 13:45:24.231] mtd24 attached [2025-09-24 13:45:24.247] mtd28 attached [2025-09-24 13:45:24.263] mtd32 attached [2025-09-24 13:45:24.279] ubi0:textures is mounted. [2025-09-24 13:45:24.311] RTNETLINK answers: File exists [2025-09-24 13:45:24.362] ubi1:animations is mounted. [2025-09-24 13:45:24.362] ubi2:dml_code is mounted. [2025-09-24 13:45:24.362] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:45:24.362] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:45:24.362] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:45:24.362] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:45:24.362] data.LB_FadeInType0=100 [2025-09-24 13:45:24.362] data.CHLH_FadeInType0=0 [2025-09-24 13:45:24.362] data.WU_FadeInDelay=0 [2025-09-24 13:45:24.362] max_time_out=0 [2025-09-24 13:45:24.362] No splash screen [2025-09-24 13:45:24.362] stop dss Done [2025-09-24 13:45:24.362] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:45:24.410] /dev/mem opened. [2025-09-24 13:45:24.410] Memory mapped at address 0xffff9e889000. [2025-09-24 13:45:24.436] Read at address 0x00600018 (0xffff9e889018): 0x00000000 [2025-09-24 13:45:24.436] Write at address 0x00600018 (0xffff9e889018): 0x00400040, readback 0x00400040 [2025-09-24 13:45:24.436] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:45:24.468] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:45:24.565] Loaded PowerVR consumer services. [2025-09-24 13:45:24.724] Waiting data available... [2025-09-24 13:45:24.740] 512+0 records in [2025-09-24 13:45:24.740] 512+0 records out [2025-09-24 13:45:24.788] Starting syslogd/klogd: done [2025-09-24 13:45:24.804] DML Start [2025-09-24 13:45:24.980] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:45:25.220] DML res1: 0 [2025-09-24 13:45:25.652] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:45:25.652] Read Success [2025-09-24 13:45:25.668] Verifying certificate... [2025-09-24 13:45:25.891] Verified OK [2025-09-24 13:45:25.907] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:45:27.518] Verified OK [2025-09-24 13:45:27.518] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:45:28.045] Verified OK [2025-09-24 13:45:28.066] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:45:30.831] fs.protected_hardlinks = 1 [2025-09-24 13:45:30.831] fs.protected_symlinks = 1 [2025-09-24 13:45:30.847] kernel.modules_disabled = 1 [2025-09-24 13:45:31.023] [2025-09-24 13:45:31.023] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:45:32.230] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:45:39.968] SBL1:1210.0.1.0 [2025-09-24 13:45:40.000] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:45:41.583] SBL2:1210.0.1.0 [2025-09-24 13:45:41.631] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:45:41.728] j-A [2025-09-24 13:45:49.082] The R5 Autosar Classic is running [2025-09-24 13:45:49.104] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:45:49.104] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:45:49.712] INIT: version 2.96 booting [2025-09-24 13:45:49.823] INIT: Entering runlevel: 5 [2025-09-24 13:45:49.967] mtd24 attached [2025-09-24 13:45:49.984] mtd28 attached [2025-09-24 13:45:50.000] mtd32 attached [2025-09-24 13:45:50.048] ubi0:textures is mounted. [2025-09-24 13:45:50.048] RTNETLINK answers: File exists [2025-09-24 13:45:50.107] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:45:50.107] ubi1:animations is mounted. [2025-09-24 13:45:50.107] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:45:50.107] ubi2:dml_code is mounted. [2025-09-24 13:45:50.107] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:45:50.107] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:45:50.107] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:45:50.107] data.LB_FadeInType0=100 [2025-09-24 13:45:50.107] data.CHLH_FadeInType0=0 [2025-09-24 13:45:50.107] data.WU_FadeInDelay=0 [2025-09-24 13:45:50.107] max_time_out=0 [2025-09-24 13:45:50.107] No splash screen [2025-09-24 13:45:50.107] stop dss Done [2025-09-24 13:45:50.139] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:45:50.177] /dev/mem opened. [2025-09-24 13:45:50.177] Memory mapped at address 0xffffae30a000. [2025-09-24 13:45:50.177] Read at address 0x00600018 (0xffffae30a018): 0x00000000 [2025-09-24 13:45:50.177] Write at address 0x00600018 (0xffffae30a018): 0x00400040, readback 0x00400040 [2025-09-24 13:45:50.177] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:45:50.353] Loaded PowerVR consumer services. [2025-09-24 13:45:50.465] Waiting data available... [2025-09-24 13:45:50.481] 512+0 records in [2025-09-24 13:45:50.497] 512+0 records out [2025-09-24 13:45:50.529] Starting syslogd/klogd: done [2025-09-24 13:45:50.545] DML Start [2025-09-24 13:45:50.721] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:45:50.896] DML res1: 0 [2025-09-24 13:45:51.424] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:45:51.440] Read Success [2025-09-24 13:45:51.440] Verifying certificate... [2025-09-24 13:45:51.680] Verified OK [2025-09-24 13:45:51.696] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:45:53.404] Verified OK [2025-09-24 13:45:53.404] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:45:54.002] Verified OK [2025-09-24 13:45:54.002] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:45:56.496] fs.protected_hardlinks = 1 [2025-09-24 13:45:56.496] fs.protected_symlinks = 1 [2025-09-24 13:45:56.512] kernel.modules_disabled = 1 [2025-09-24 13:45:56.720] [2025-09-24 13:45:56.720] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:45:57.964] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:46:05.680] SBL1:1210.0.1.0 [2025-09-24 13:46:05.728] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:46:07.294] SBL2:1210.0.1.0 [2025-09-24 13:46:07.343] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:46:07.454] j-A [2025-09-24 13:46:14.827] The R5 Autosar Classic is running [2025-09-24 13:46:14.827] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:46:14.827] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:46:15.434] INIT: version 2.96 booting [2025-09-24 13:46:15.547] INIT: Entering runlevel: 5 [2025-09-24 13:46:15.690] mtd28 attached [2025-09-24 13:46:15.706] mtd24 attached [2025-09-24 13:46:15.722] mtd32 attached [2025-09-24 13:46:15.808] RTNETLINK answers: File exists [2025-09-24 13:46:15.808] ubi0:animations is mounted. [2025-09-24 13:46:15.808] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:46:15.808] ubi2:dml_code is mounted. [2025-09-24 13:46:15.808] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:46:15.808] ubi1:textures is mounted. [2025-09-24 13:46:15.808] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:46:15.808] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:46:15.808] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:46:15.830] data.LB_FadeInType0=100 [2025-09-24 13:46:15.830] data.CHLH_FadeInType0=0 [2025-09-24 13:46:15.830] data.WU_FadeInDelay=0 [2025-09-24 13:46:15.830] max_time_out=0 [2025-09-24 13:46:15.830] No splash screen [2025-09-24 13:46:15.830] stop dss Done [2025-09-24 13:46:15.878] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:46:15.914] /dev/mem opened. [2025-09-24 13:46:15.914] Memory mapped at address 0xffffaf03b000. [2025-09-24 13:46:15.914] Read at address 0x00600018 (0xffffaf03b018): 0x00000000 [2025-09-24 13:46:15.914] Write at address 0x00600018 (0xffffaf03b018): 0x00400040, readback 0x00400040 [2025-09-24 13:46:15.914] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:46:15.994] Loaded PowerVR consumer services. [2025-09-24 13:46:16.170] Waiting data available... [2025-09-24 13:46:16.219] 512+0 records in [2025-09-24 13:46:16.219] 512+0 records out [2025-09-24 13:46:16.250] Starting syslogd/klogd: done [2025-09-24 13:46:16.266] DML Start [2025-09-24 13:46:16.426] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:46:16.650] DML res1: 0 [2025-09-24 13:46:17.128] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:46:17.128] Read Success [2025-09-24 13:46:17.128] Verifying certificate... [2025-09-24 13:46:17.353] Verified OK [2025-09-24 13:46:17.368] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:46:19.029] Verified OK [2025-09-24 13:46:19.029] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:46:19.637] Verified OK [2025-09-24 13:46:19.637] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:46:22.243] fs.protected_hardlinks = 1 [2025-09-24 13:46:22.259] fs.protected_symlinks = 1 [2025-09-24 13:46:22.259] kernel.modules_disabled = 1 [2025-09-24 13:46:22.450] [2025-09-24 13:46:22.450] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:46:23.694] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:46:31.431] SBL1:1210.0.1.0 [2025-09-24 13:46:31.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:46:33.046] SBL2:1210.0.1.0 [2025-09-24 13:46:33.094] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 13:46:33.190] j-A [2025-09-24 13:46:40.543] The R5 Autosar Classic is running [2025-09-24 13:46:40.566] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:46:40.566] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:46:41.174] INIT: version 2.96 booting [2025-09-24 13:46:41.285] INIT: Entering runlevel: 5 [2025-09-24 13:46:41.445] mtd28 attached [2025-09-24 13:46:41.461] mtd24 attached [2025-09-24 13:46:41.477] mtd32 attached [2025-09-24 13:46:41.509] ubi0:animations is mounted. [2025-09-24 13:46:41.579] ubi1:textures is mounted. [2025-09-24 13:46:41.579] RTNETLINK answers: File exists [2025-09-24 13:46:41.579] ubi2:dml_code is mounted. [2025-09-24 13:46:41.579] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:46:41.579] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:46:41.579] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:46:41.579] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:46:41.579] data.LB_FadeInType0=100 [2025-09-24 13:46:41.579] data.CHLH_FadeInType0=0 [2025-09-24 13:46:41.579] data.WU_FadeInDelay=0 [2025-09-24 13:46:41.579] max_time_out=0 [2025-09-24 13:46:41.579] No splash screen [2025-09-24 13:46:41.579] stop dss Done [2025-09-24 13:46:41.579] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:46:41.657] /dev/mem opened. [2025-09-24 13:46:41.657] Memory mapped at address 0xffffa0d49000. [2025-09-24 13:46:41.657] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:46:41.657] Read at address 0x00600018 (0xffffa0d49018): 0x00000000 [2025-09-24 13:46:41.657] Write at address 0x00600018 (0xffffa0d49018): 0x00400040, readback 0x00400040 [2025-09-24 13:46:41.657] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:46:41.737] Loaded PowerVR consumer services. [2025-09-24 13:46:41.929] Waiting data available... [2025-09-24 13:46:41.945] 512+0 records in [2025-09-24 13:46:41.945] 512+0 records out [2025-09-24 13:46:41.976] Starting syslogd/klogd: done [2025-09-24 13:46:41.992] DML Start [2025-09-24 13:46:42.169] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:46:42.392] DML res1: 0 [2025-09-24 13:46:42.841] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:46:42.862] Read Success [2025-09-24 13:46:42.862] Verifying certificate... [2025-09-24 13:46:43.101] Verified OK [2025-09-24 13:46:43.117] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:46:44.787] Verified OK [2025-09-24 13:46:44.787] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:46:45.347] Verified OK [2025-09-24 13:46:45.347] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:46:48.017] fs.protected_hardlinks = 1 [2025-09-24 13:46:48.033] fs.protected_symlinks = 1 [2025-09-24 13:46:48.033] kernel.modules_disabled = 1 [2025-09-24 13:46:48.225] [2025-09-24 13:46:48.225] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:46:49.439] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:46:57.148] SBL1:1210.0.1.0 [2025-09-24 13:46:57.196] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:46:58.764] SBL2:1210.0.1.0 [2025-09-24 13:46:58.811] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:46:58.923] j-A [2025-09-24 13:47:06.261] The R5 Autosar Classic is running [2025-09-24 13:47:06.286] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:47:06.286] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:47:06.894] INIT: version 2.96 booting [2025-09-24 13:47:07.005] INIT: Entering runlevel: 5 [2025-09-24 13:47:07.150] mtd28 attached [2025-09-24 13:47:07.182] mtd32 attached [2025-09-24 13:47:07.182] mtd24 attached [2025-09-24 13:47:07.229] RTNETLINK answers: File exists [2025-09-24 13:47:07.229] ubi0:animations is mounted. [2025-09-24 13:47:07.295] ubi1:dml_code is mounted. [2025-09-24 13:47:07.295] ubi2:textures is mounted. [2025-09-24 13:47:07.295] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:47:07.295] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:47:07.295] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:47:07.295] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:47:07.295] data.LB_FadeInType0=100 [2025-09-24 13:47:07.295] data.CHLH_FadeInType0=0 [2025-09-24 13:47:07.295] data.WU_FadeInDelay=0 [2025-09-24 13:47:07.295] max_time_out=0 [2025-09-24 13:47:07.295] No splash screen [2025-09-24 13:47:07.295] stop dss Done [2025-09-24 13:47:07.295] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:47:07.342] /dev/mem opened. [2025-09-24 13:47:07.374] Memory mapped at address 0xffffbcd2c000. [2025-09-24 13:47:07.374] Read at address 0x00600018 (0xffffbcd2c018): 0x00000000 [2025-09-24 13:47:07.374] Write at address 0x00600018 (0xffffbcd2c018): 0x00400040, readback 0x00400040 [2025-09-24 13:47:07.374] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:47:07.374] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:47:07.503] Loaded PowerVR consumer services. [2025-09-24 13:47:07.647] Waiting data available... [2025-09-24 13:47:07.678] 512+0 records in [2025-09-24 13:47:07.678] 512+0 records out [2025-09-24 13:47:07.710] Starting syslogd/klogd: done [2025-09-24 13:47:07.726] DML Start [2025-09-24 13:47:07.918] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:47:08.142] DML res1: 0 [2025-09-24 13:47:08.553] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:47:08.553] Read Success [2025-09-24 13:47:08.553] Verifying certificate... [2025-09-24 13:47:08.778] Verified OK [2025-09-24 13:47:08.794] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:47:10.397] Verified OK [2025-09-24 13:47:10.397] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:47:10.989] Verified OK [2025-09-24 13:47:10.989] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:47:13.740] fs.protected_hardlinks = 1 [2025-09-24 13:47:13.740] fs.protected_symlinks = 1 [2025-09-24 13:47:13.756] kernel.modules_disabled = 1 [2025-09-24 13:47:13.947] [2025-09-24 13:47:13.947] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:47:15.155] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:47:22.893] SBL1:1210.0.1.0 [2025-09-24 13:47:22.925] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:47:24.508] SBL2:1210.0.1.0 [2025-09-24 13:47:24.539] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:47:24.652] j-A [2025-09-24 13:47:32.026] The R5 Autosar Classic is running [2025-09-24 13:47:32.026] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:47:32.026] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:47:32.633] INIT: version 2.96 booting [2025-09-24 13:47:32.745] INIT: Entering runlevel: 5 [2025-09-24 13:47:32.889] mtd24 attached [2025-09-24 13:47:32.905] mtd28 attached [2025-09-24 13:47:32.920] mtd32 attached [2025-09-24 13:47:32.968] ubi0:textures is mounted. [2025-09-24 13:47:33.031] ubi1:animations is mounted. [2025-09-24 13:47:33.031] ubi2:dml_code is mounted. [2025-09-24 13:47:33.031] RTNETLINK answers: File exists [2025-09-24 13:47:33.031] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:47:33.031] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:47:33.031] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:47:33.031] data.LB_FadeInType0=100 [2025-09-24 13:47:33.031] data.CHLH_FadeInType0=0 [2025-09-24 13:47:33.031] data.WU_FadeInDelay=0 [2025-09-24 13:47:33.031] max_time_out=0 [2025-09-24 13:47:33.031] No splash screen [2025-09-24 13:47:33.031] stop dss Done [2025-09-24 13:47:33.031] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:47:33.031] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:47:33.104] /dev/mem opened. [2025-09-24 13:47:33.104] Memory mapped at address 0xffff93a2b000. [2025-09-24 13:47:33.104] Read at address 0x00600018 (0xffff93a2b018): 0x00000000 [2025-09-24 13:47:33.104] Write at address 0x00600018 (0xffff93a2b018): 0x00400040, readback 0x00400040 [2025-09-24 13:47:33.104] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:47:33.104] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:47:33.376] Loaded PowerVR consumer services. [2025-09-24 13:47:33.440] Waiting data available... [2025-09-24 13:47:33.456] 512+0 records in [2025-09-24 13:47:33.456] 512+0 records out [2025-09-24 13:47:33.488] Starting syslogd/klogd: done [2025-09-24 13:47:33.504] DML Start [2025-09-24 13:47:33.681] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:47:33.936] DML res1: 0 [2025-09-24 13:47:34.349] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:47:34.349] Read Success [2025-09-24 13:47:34.349] Verifying certificate... [2025-09-24 13:47:34.589] Verified OK [2025-09-24 13:47:34.605] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:47:36.060] Verified OK [2025-09-24 13:47:36.060] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:47:36.737] Verified OK [2025-09-24 13:47:36.737] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:47:39.455] fs.protected_hardlinks = 1 [2025-09-24 13:47:39.455] fs.protected_symlinks = 1 [2025-09-24 13:47:39.471] kernel.modules_disabled = 1 [2025-09-24 13:47:39.664] [2025-09-24 13:47:39.664] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:47:40.957] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:47:48.625] SBL1:1210.0.1.0 [2025-09-24 13:47:48.673] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:47:50.239] SBL2:1210.0.1.0 [2025-09-24 13:47:50.287] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:47:50.399] j-A [2025-09-24 13:47:57.771] The R5 Autosar Classic is running [2025-09-24 13:47:57.771] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:47:57.771] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:47:58.378] INIT: version 2.96 booting [2025-09-24 13:47:58.490] INIT: Entering runlevel: 5 [2025-09-24 13:47:58.634] mtd28 attached [2025-09-24 13:47:58.650] mtd24 attached [2025-09-24 13:47:58.666] mtd32 attached [2025-09-24 13:47:58.714] ubi0:animations is mounted. [2025-09-24 13:47:58.714] RTNETLINK answers: File exists [2025-09-24 13:47:58.772] ubi1:textures is mounted. [2025-09-24 13:47:58.772] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:47:58.772] ubi2:dml_code is mounted. [2025-09-24 13:47:58.772] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:47:58.772] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:47:58.772] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:47:58.772] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:47:58.772] data.LB_FadeInType0=100 [2025-09-24 13:47:58.772] data.CHLH_FadeInType0=0 [2025-09-24 13:47:58.772] data.WU_FadeInDelay=0 [2025-09-24 13:47:58.772] max_time_out=0 [2025-09-24 13:47:58.772] No splash screen [2025-09-24 13:47:58.772] stop dss Done [2025-09-24 13:47:58.819] /dev/mem opened. [2025-09-24 13:47:58.819] Memory mapped at address 0xffffab547000. [2025-09-24 13:47:58.865] Read at address 0x00600018 (0xffffab547018): 0x00000000 [2025-09-24 13:47:58.865] Write at address 0x00600018 (0xffffab547018): 0x00400040, readback 0x00400040 [2025-09-24 13:47:58.865] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:47:58.865] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:47:59.057] Loaded PowerVR consumer services. [2025-09-24 13:47:59.153] Waiting data available... [2025-09-24 13:47:59.169] 512+0 records in [2025-09-24 13:47:59.169] 512+0 records out [2025-09-24 13:47:59.201] Starting syslogd/klogd: done [2025-09-24 13:47:59.218] DML Start [2025-09-24 13:47:59.377] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:47:59.537] DML res1: 0 [2025-09-24 13:48:00.138] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:48:00.138] Read Success [2025-09-24 13:48:00.138] Verifying certificate... [2025-09-24 13:48:00.394] Verified OK [2025-09-24 13:48:00.442] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:48:01.929] Verified OK [2025-09-24 13:48:01.950] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:48:02.506] Verified OK [2025-09-24 13:48:02.506] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:48:05.192] fs.protected_hardlinks = 1 [2025-09-24 13:48:05.208] fs.protected_symlinks = 1 [2025-09-24 13:48:05.208] kernel.modules_disabled = 1 [2025-09-24 13:48:05.400] [2025-09-24 13:48:05.400] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:48:06.631] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:48:14.356] SBL1:1210.0.1.0 [2025-09-24 13:48:14.388] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:48:15.971] SBL2:1210.0.1.0 [2025-09-24 13:48:16.002] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:48:16.114] j-A [2025-09-24 13:48:23.467] The R5 Autosar Classic is running [2025-09-24 13:48:23.467] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:48:23.488] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:48:24.096] INIT: version 2.96 booting [2025-09-24 13:48:24.207] INIT: Entering runlevel: 5 [2025-09-24 13:48:24.368] mtd28 attached [2025-09-24 13:48:24.368] mtd24 attached [2025-09-24 13:48:24.384] mtd32 attached [2025-09-24 13:48:24.416] ubi0:animations is mounted. [2025-09-24 13:48:24.432] ubi1:textures is mounted. [2025-09-24 13:48:24.432] RTNETLINK answers: File exists [2025-09-24 13:48:24.492] ubi2:dml_code is mounted. [2025-09-24 13:48:24.492] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:48:24.492] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:48:24.492] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:48:24.492] data.LB_FadeInType0=100 [2025-09-24 13:48:24.492] data.CHLH_FadeInType0=0 [2025-09-24 13:48:24.492] data.WU_FadeInDelay=0 [2025-09-24 13:48:24.492] max_time_out=0 [2025-09-24 13:48:24.492] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:48:24.492] No splash screen [2025-09-24 13:48:24.492] stop dss Done [2025-09-24 13:48:24.492] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:48:24.577] /dev/mem opened. [2025-09-24 13:48:24.577] Memory mapped at address 0xffffa8521000. [2025-09-24 13:48:24.577] Read at address 0x00600018 (0xffffa8521018): 0x00000000 [2025-09-24 13:48:24.577] Write at address 0x00600018 (0xffffa8521018): 0x00400040, readback 0x00400040 [2025-09-24 13:48:24.577] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:48:24.577] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:48:24.657] Loaded PowerVR consumer services. [2025-09-24 13:48:24.834] Waiting data available... [2025-09-24 13:48:24.865] 512+0 records in [2025-09-24 13:48:24.865] 512+0 records out [2025-09-24 13:48:24.881] Starting syslogd/klogd: done [2025-09-24 13:48:24.913] DML Start [2025-09-24 13:48:25.057] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:48:25.297] DML res1: 0 [2025-09-24 13:48:25.729] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:48:25.750] Read Success [2025-09-24 13:48:25.750] Verifying certificate... [2025-09-24 13:48:25.973] Verified OK [2025-09-24 13:48:25.989] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:48:27.596] Verified OK [2025-09-24 13:48:27.596] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:48:28.146] Verified OK [2025-09-24 13:48:28.146] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:48:31.025] fs.protected_hardlinks = 1 [2025-09-24 13:48:31.025] fs.protected_symlinks = 1 [2025-09-24 13:48:31.040] kernel.modules_disabled = 1 [2025-09-24 13:48:31.232] [2025-09-24 13:48:31.232] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:48:32.333] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:48:40.072] SBL1:1210.0.1.0 [2025-09-24 13:48:40.104] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:48:41.687] SBL2:1210.0.1.0 [2025-09-24 13:48:41.719] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:48:41.831] j-A [2025-09-24 13:48:49.184] The R5 Autosar Classic is running [2025-09-24 13:48:49.205] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:48:49.205] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:48:49.813] INIT: version 2.96 booting [2025-09-24 13:48:49.924] INIT: Entering runlevel: 5 [2025-09-24 13:48:50.084] mtd24 attached [2025-09-24 13:48:50.100] mtd28 attached [2025-09-24 13:48:50.100] mtd32 attached [2025-09-24 13:48:50.195] RTNETLINK answers: File exists [2025-09-24 13:48:50.195] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:48:50.195] ubi0:textures is mounted. [2025-09-24 13:48:50.195] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:48:50.195] ubi1:animations is mounted. [2025-09-24 13:48:50.195] ubi2:dml_code is mounted. [2025-09-24 13:48:50.195] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:48:50.195] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:48:50.195] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:48:50.217] data.LB_FadeInType0=100 [2025-09-24 13:48:50.217] data.CHLH_FadeInType0=0 [2025-09-24 13:48:50.217] data.WU_FadeInDelay=0 [2025-09-24 13:48:50.217] max_time_out=0 [2025-09-24 13:48:50.217] No splash screen [2025-09-24 13:48:50.217] stop dss Done [2025-09-24 13:48:50.233] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:48:50.249] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:48:50.287] /dev/mem opened. [2025-09-24 13:48:50.287] Memory mapped at address 0xffff9efd6000. [2025-09-24 13:48:50.287] Read at address 0x00600018 (0xffff9efd6018): 0x00000000 [2025-09-24 13:48:50.287] Write at address 0x00600018 (0xffff9efd6018): 0x00400040, readback 0x00400040 [2025-09-24 13:48:50.383] Loaded PowerVR consumer services. [2025-09-24 13:48:50.559] Waiting data available... [2025-09-24 13:48:50.591] 512+0 records in [2025-09-24 13:48:50.591] 512+0 records out [2025-09-24 13:48:50.607] Starting syslogd/klogd: done [2025-09-24 13:48:50.639] DML Start [2025-09-24 13:48:50.783] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:48:51.022] DML res1: 0 [2025-09-24 13:48:51.438] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:48:51.459] Read Success [2025-09-24 13:48:51.459] Verifying certificate... [2025-09-24 13:48:51.699] Verified OK [2025-09-24 13:48:51.715] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:48:53.319] Verified OK [2025-09-24 13:48:53.319] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:48:53.942] Verified OK [2025-09-24 13:48:53.942] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:48:56.724] fs.protected_hardlinks = 1 [2025-09-24 13:48:56.740] fs.protected_symlinks = 1 [2025-09-24 13:48:56.740] kernel.modules_disabled = 1 [2025-09-24 13:48:56.948] [2025-09-24 13:48:56.948] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:48:58.067] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:49:05.800] SBL1:1210.0.1.0 [2025-09-24 13:49:05.832] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:49:07.415] SBL2:1210.0.1.0 [2025-09-24 13:49:07.447] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:49:07.559] j-A [2025-09-24 13:49:14.912] The R5 Autosar Classic is running [2025-09-24 13:49:14.912] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:49:14.933] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:49:15.540] INIT: version 2.96 booting [2025-09-24 13:49:15.652] INIT: Entering runlevel: 5 [2025-09-24 13:49:15.813] mtd28 attached [2025-09-24 13:49:15.813] mtd24 attached [2025-09-24 13:49:15.871] ubi0:animations is mounted. [2025-09-24 13:49:15.871] ubi1:textures is mounted. [2025-09-24 13:49:15.871] mtd32 attached [2025-09-24 13:49:15.887] RTNETLINK answers: File exists [2025-09-24 13:49:15.887] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:49:15.923] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:49:15.923] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:49:15.923] ubi2:dml_code is mounted. [2025-09-24 13:49:15.923] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:49:15.923] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:49:15.923] data.LB_FadeInType0=100 [2025-09-24 13:49:15.923] data.CHLH_FadeInType0=0 [2025-09-24 13:49:15.944] data.WU_FadeInDelay=0 [2025-09-24 13:49:15.944] max_time_out=0 [2025-09-24 13:49:15.944] No splash screen [2025-09-24 13:49:15.944] stop dss Done [2025-09-24 13:49:15.960] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:49:15.960] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:49:16.017] /dev/mem opened. [2025-09-24 13:49:16.017] Memory mapped at address 0xffff9716b000. [2025-09-24 13:49:16.017] Read at address 0x00600018 (0xffff9716b018): 0x00000000 [2025-09-24 13:49:16.017] Write at address 0x00600018 (0xffff9716b018): 0x00400040, readback 0x00400040 [2025-09-24 13:49:16.113] Loaded PowerVR consumer services. [2025-09-24 13:49:16.288] Waiting data available... [2025-09-24 13:49:16.320] 512+0 records in [2025-09-24 13:49:16.320] 512+0 records out [2025-09-24 13:49:16.352] Starting syslogd/klogd: done [2025-09-24 13:49:16.368] DML Start [2025-09-24 13:49:16.561] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:49:16.800] DML res1: 0 [2025-09-24 13:49:17.148] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:49:17.148] Read Success [2025-09-24 13:49:17.148] Verifying certificate... [2025-09-24 13:49:17.372] Verified OK [2025-09-24 13:49:17.372] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:49:18.918] Verified OK [2025-09-24 13:49:18.918] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:49:19.509] Verified OK [2025-09-24 13:49:19.509] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:49:22.355] fs.protected_hardlinks = 1 [2025-09-24 13:49:22.355] fs.protected_symlinks = 1 [2025-09-24 13:49:22.355] kernel.modules_disabled = 1 [2025-09-24 13:49:22.547] [2025-09-24 13:49:22.547] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:49:23.809] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:49:31.548] SBL1:1210.0.1.0 [2025-09-24 13:49:31.580] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:49:33.162] SBL2:1210.0.1.0 [2025-09-24 13:49:33.194] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:49:33.306] j-A [2025-09-24 13:49:40.681] The R5 Autosar Classic is running [2025-09-24 13:49:40.681] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:49:40.681] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:49:41.288] INIT: version 2.96 booting [2025-09-24 13:49:41.400] INIT: Entering runlevel: 5 [2025-09-24 13:49:41.561] mtd24 attached [2025-09-24 13:49:41.561] mtd28 attached [2025-09-24 13:49:41.577] mtd32 attached [2025-09-24 13:49:41.625] ubi0:textures is mounted. [2025-09-24 13:49:41.667] ubi1:animations is mounted. [2025-09-24 13:49:41.667] ubi2:dml_code is mounted. [2025-09-24 13:49:41.667] RTNETLINK answers: File exists [2025-09-24 13:49:41.667] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:49:41.667] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:49:41.667] data.LB_FadeInType0=100 [2025-09-24 13:49:41.699] data.CHLH_FadeInType0=0 [2025-09-24 13:49:41.699] data.WU_FadeInDelay=0 [2025-09-24 13:49:41.699] max_time_out=0 [2025-09-24 13:49:41.699] No splash screen [2025-09-24 13:49:41.699] stop dss Done [2025-09-24 13:49:41.699] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:49:41.699] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:49:41.699] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:49:41.756] /dev/mem opened. [2025-09-24 13:49:41.756] Memory mapped at address 0xffff8f387000. [2025-09-24 13:49:41.756] Read at address 0x00600018 (0xffff8f387018): 0x00000000 [2025-09-24 13:49:41.756] Write at address 0x00600018 (0xffff8f387018): 0x00400040, readback 0x00400040 [2025-09-24 13:49:41.804] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:49:41.820] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:49:42.061] Loaded PowerVR consumer services. [2025-09-24 13:49:42.093] Waiting data available... [2025-09-24 13:49:42.125] 512+0 records in [2025-09-24 13:49:42.125] 512+0 records out [2025-09-24 13:49:42.141] Starting syslogd/klogd: done [2025-09-24 13:49:42.157] DML Start [2025-09-24 13:49:42.300] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:49:42.524] DML res1: 0 [2025-09-24 13:49:42.987] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:49:43.008] Read Success [2025-09-24 13:49:43.008] Verifying certificate... [2025-09-24 13:49:43.280] Verified OK [2025-09-24 13:49:43.296] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:49:44.927] Verified OK [2025-09-24 13:49:44.927] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:49:45.428] Verified OK [2025-09-24 13:49:45.428] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:49:47.986] fs.protected_hardlinks = 1 [2025-09-24 13:49:47.986] fs.protected_symlinks = 1 [2025-09-24 13:49:48.002] kernel.modules_disabled = 1 [2025-09-24 13:49:48.194] [2025-09-24 13:49:48.194] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:49:49.579] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:49:57.270] SBL1:1210.0.1.0 [2025-09-24 13:49:57.318] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:49:58.884] SBL2:1210.0.1.0 [2025-09-24 13:49:58.932] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:49:59.027] j-A [2025-09-24 13:50:06.383] The R5 Autosar Classic is running [2025-09-24 13:50:06.407] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:50:06.407] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:50:07.014] INIT: version 2.96 booting [2025-09-24 13:50:07.127] INIT: Entering runlevel: 5 [2025-09-24 13:50:07.286] mtd24 attached [2025-09-24 13:50:07.302] mtd32 attached [2025-09-24 13:50:07.318] mtd28 attached [2025-09-24 13:50:07.334] ubi0:textures is mounted. [2025-09-24 13:50:07.424] ubi1:dml_code is mounted. [2025-09-24 13:50:07.424] RTNETLINK answers: File exists [2025-09-24 13:50:07.424] ubi2:animations is mounted. [2025-09-24 13:50:07.424] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:50:07.424] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:50:07.424] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:50:07.424] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:50:07.424] data.LB_FadeInType0=100 [2025-09-24 13:50:07.424] data.CHLH_FadeInType0=0 [2025-09-24 13:50:07.424] data.WU_FadeInDelay=0 [2025-09-24 13:50:07.424] max_time_out=0 [2025-09-24 13:50:07.424] No splash screen [2025-09-24 13:50:07.424] stop dss Done [2025-09-24 13:50:07.424] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:50:07.489] /dev/mem opened. [2025-09-24 13:50:07.489] Memory mapped at address 0xffff99c00000. [2025-09-24 13:50:07.489] Read at address 0x00600018 (0xffff99c00018): 0x00000000 [2025-09-24 13:50:07.489] Write at address 0x00600018 (0xffff99c00018): 0x00400040, readback 0x00400040 [2025-09-24 13:50:07.521] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:50:07.537] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:50:07.633] Loaded PowerVR consumer services. [2025-09-24 13:50:07.776] Waiting data available... [2025-09-24 13:50:07.793] 512+0 records in [2025-09-24 13:50:07.793] 512+0 records out [2025-09-24 13:50:07.808] Starting syslogd/klogd: done [2025-09-24 13:50:07.840] DML Start [2025-09-24 13:50:08.016] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:50:08.224] DML res1: 0 [2025-09-24 13:50:08.671] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:50:08.692] Read Success [2025-09-24 13:50:08.692] Verifying certificate... [2025-09-24 13:50:08.964] Verified OK [2025-09-24 13:50:08.980] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:50:10.627] Verified OK [2025-09-24 13:50:10.643] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:50:11.219] Verified OK [2025-09-24 13:50:11.219] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:50:13.808] fs.protected_hardlinks = 1 [2025-09-24 13:50:13.838] fs.protected_symlinks = 1 [2025-09-24 13:50:13.838] kernel.modules_disabled = 1 [2025-09-24 13:50:14.046] [2025-09-24 13:50:14.046] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:50:15.261] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:50:23.026] SBL1:1210.0.1.0 [2025-09-24 13:50:23.058] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:50:24.641] SBL2:1210.0.1.0 [2025-09-24 13:50:24.672] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:50:24.784] j-A [2025-09-24 13:50:32.140] The R5 Autosar Classic is running [2025-09-24 13:50:32.140] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:50:32.160] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:50:32.768] INIT: version 2.96 booting [2025-09-24 13:50:32.880] INIT: Entering runlevel: 5 [2025-09-24 13:50:33.024] mtd28 attached [2025-09-24 13:50:33.039] mtd24 attached [2025-09-24 13:50:33.055] mtd32 attached [2025-09-24 13:50:33.088] ubi0:animations is mounted. [2025-09-24 13:50:33.088] ubi1:textures is mounted. [2025-09-24 13:50:33.104] RTNETLINK answers: File exists [2025-09-24 13:50:33.159] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:50:33.159] ubi2:dml_code is mounted. [2025-09-24 13:50:33.159] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:50:33.159] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:50:33.159] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:50:33.159] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:50:33.159] data.LB_FadeInType0=100 [2025-09-24 13:50:33.159] data.CHLH_FadeInType0=0 [2025-09-24 13:50:33.159] data.WU_FadeInDelay=0 [2025-09-24 13:50:33.159] max_time_out=0 [2025-09-24 13:50:33.159] No splash screen [2025-09-24 13:50:33.159] stop dss Done [2025-09-24 13:50:33.175] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:50:33.191] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:50:33.207] /dev/mem opened. [2025-09-24 13:50:33.233] Memory mapped at address 0xffff99bd7000. [2025-09-24 13:50:33.233] Read at address 0x00600018 (0xffff99bd7018): 0x00000000 [2025-09-24 13:50:33.233] Write at address 0x00600018 (0xffff99bd7018): 0x00400040, readback 0x00400040 [2025-09-24 13:50:33.313] Loaded PowerVR consumer services. [2025-09-24 13:50:33.505] Waiting data available... [2025-09-24 13:50:33.537] 512+0 records in [2025-09-24 13:50:33.537] 512+0 records out [2025-09-24 13:50:33.553] Starting syslogd/klogd: done [2025-09-24 13:50:33.569] DML Start [2025-09-24 13:50:33.744] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:50:33.952] DML res1: 0 [2025-09-24 13:50:34.447] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:50:34.464] Read Success [2025-09-24 13:50:34.464] Verifying certificate... [2025-09-24 13:50:34.751] Verified OK [2025-09-24 13:50:34.783] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:50:36.367] Verified OK [2025-09-24 13:50:36.367] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:50:36.974] Verified OK [2025-09-24 13:50:36.990] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:50:39.720] fs.protected_hardlinks = 1 [2025-09-24 13:50:39.720] fs.protected_symlinks = 1 [2025-09-24 13:50:39.720] kernel.modules_disabled = 1 [2025-09-24 13:50:39.896] [2025-09-24 13:50:39.896] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:50:40.983] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:50:48.748] SBL1:1210.0.1.0 [2025-09-24 13:50:48.780] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:50:50.362] SBL2:1210.0.1.0 [2025-09-24 13:50:50.410] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:50:50.506] j-A [2025-09-24 13:50:57.862] The R5 Autosar Classic is running [2025-09-24 13:50:57.862] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:50:57.883] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:50:58.490] INIT: version 2.96 booting [2025-09-24 13:50:58.602] INIT: Entering runlevel: 5 [2025-09-24 13:50:58.761] mtd28 attached [2025-09-24 13:50:58.761] mtd24 attached [2025-09-24 13:50:58.777] mtd32 attached [2025-09-24 13:50:58.826] ubi0:animations is mounted. [2025-09-24 13:50:58.826] RTNETLINK answers: File exists [2025-09-24 13:50:58.894] ubi1:textures is mounted. [2025-09-24 13:50:58.894] ubi2:dml_code is mounted. [2025-09-24 13:50:58.894] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:50:58.894] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:50:58.894] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:50:58.894] data.LB_FadeInType0=100 [2025-09-24 13:50:58.894] data.CHLH_FadeInType0=0 [2025-09-24 13:50:58.894] data.WU_FadeInDelay=0 [2025-09-24 13:50:58.894] max_time_out=0 [2025-09-24 13:50:58.894] No splash screen [2025-09-24 13:50:58.894] stop dss Done [2025-09-24 13:50:58.894] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:50:58.894] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:50:58.942] /dev/mem opened. [2025-09-24 13:50:58.942] Memory mapped at address 0xffffa2c9a000. [2025-09-24 13:50:58.978] Read at address 0x00600018 (0xffffa2c9a018): 0x00000000 [2025-09-24 13:50:58.978] Write at address 0x00600018 (0xffffa2c9a018): 0x00400040, readback 0x00400040 [2025-09-24 13:50:58.978] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:50:58.978] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:50:59.154] Loaded PowerVR consumer services. [2025-09-24 13:50:59.250] Waiting data available... [2025-09-24 13:50:59.266] 512+0 records in [2025-09-24 13:50:59.266] 512+0 records out [2025-09-24 13:50:59.298] Starting syslogd/klogd: done [2025-09-24 13:50:59.314] DML Start [2025-09-24 13:50:59.458] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:50:59.714] DML res1: 0 [2025-09-24 13:51:00.161] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:51:00.177] Read Success [2025-09-24 13:51:00.177] Verifying certificate... [2025-09-24 13:51:00.401] Verified OK [2025-09-24 13:51:00.417] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:51:02.064] Verified OK [2025-09-24 13:51:02.064] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:51:02.623] Verified OK [2025-09-24 13:51:02.639] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:51:05.293] fs.protected_hardlinks = 1 [2025-09-24 13:51:05.293] fs.protected_symlinks = 1 [2025-09-24 13:51:05.308] kernel.modules_disabled = 1 [2025-09-24 13:51:05.500] [2025-09-24 13:51:05.500] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:51:06.731] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:51:14.484] SBL1:1210.0.1.0 [2025-09-24 13:51:14.532] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:51:16.099] SBL2:1210.0.1.0 [2025-09-24 13:51:16.147] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:51:16.259] j-A [2025-09-24 13:51:23.630] The R5 Autosar Classic is running [2025-09-24 13:51:23.630] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:51:23.630] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:51:24.238] INIT: version 2.96 booting [2025-09-24 13:51:24.349] INIT: Entering runlevel: 5 [2025-09-24 13:51:24.493] mtd24 attached [2025-09-24 13:51:24.509] mtd28 attached [2025-09-24 13:51:24.525] mtd32 attached [2025-09-24 13:51:24.573] RTNETLINK answers: File exists [2025-09-24 13:51:24.635] ubi0:textures is mounted. [2025-09-24 13:51:24.635] ubi2:dml_code is mounted. [2025-09-24 13:51:24.635] ubi1:animations is mounted. [2025-09-24 13:51:24.635] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:51:24.635] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:51:24.635] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:51:24.635] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:51:24.635] data.LB_FadeInType0=100 [2025-09-24 13:51:24.635] data.CHLH_FadeInType0=0 [2025-09-24 13:51:24.635] data.WU_FadeInDelay=0 [2025-09-24 13:51:24.635] max_time_out=0 [2025-09-24 13:51:24.635] No splash screen [2025-09-24 13:51:24.635] stop dss Done [2025-09-24 13:51:24.635] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:51:24.667] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:51:24.683] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:51:24.720] /dev/mem opened. [2025-09-24 13:51:24.720] Memory mapped at address 0xffff906dd000. [2025-09-24 13:51:24.720] Read at address 0x00600018 (0xffff906dd018): 0x00000000 [2025-09-24 13:51:24.720] Write at address 0x00600018 (0xffff906dd018): 0x00400040, readback 0x00400040 [2025-09-24 13:51:24.912] Loaded PowerVR consumer services. [2025-09-24 13:51:25.024] Waiting data available... [2025-09-24 13:51:25.040] 512+0 records in [2025-09-24 13:51:25.056] 512+0 records out [2025-09-24 13:51:25.072] Starting syslogd/klogd: done [2025-09-24 13:51:25.088] DML Start [2025-09-24 13:51:25.247] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:51:25.504] DML res1: 0 [2025-09-24 13:51:25.900] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:51:25.900] Read Success [2025-09-24 13:51:25.900] Verifying certificate... [2025-09-24 13:51:26.155] Verified OK [2025-09-24 13:51:26.171] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:51:27.797] Verified OK [2025-09-24 13:51:27.797] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:51:28.404] Verified OK [2025-09-24 13:51:28.404] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:51:31.074] fs.protected_hardlinks = 1 [2025-09-24 13:51:31.074] fs.protected_symlinks = 1 [2025-09-24 13:51:31.089] kernel.modules_disabled = 1 [2025-09-24 13:51:31.281] [2025-09-24 13:51:31.281] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:51:32.542] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:51:40.215] SBL1:1210.0.1.0 [2025-09-24 13:51:40.263] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:51:41.830] SBL2:1210.0.1.0 [2025-09-24 13:51:41.877] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:51:41.989] j-A [2025-09-24 13:51:49.362] The R5 Autosar Classic is running [2025-09-24 13:51:49.362] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:51:49.362] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:51:49.970] INIT: version 2.96 booting [2025-09-24 13:51:50.081] INIT: Entering runlevel: 5 [2025-09-24 13:51:50.226] mtd24 attached [2025-09-24 13:51:50.242] mtd32 attached [2025-09-24 13:51:50.258] mtd28 attached [2025-09-24 13:51:50.306] RTNETLINK answers: File exists [2025-09-24 13:51:50.306] ubi2:animations is mounted. [2025-09-24 13:51:50.341] ubi0:textures is mounted. [2025-09-24 13:51:50.341] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:51:50.341] ubi1:dml_code is mounted. [2025-09-24 13:51:50.341] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:51:50.341] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:51:50.341] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:51:50.341] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:51:50.357] data.LB_FadeInType0=100 [2025-09-24 13:51:50.357] data.CHLH_FadeInType0=0 [2025-09-24 13:51:50.357] data.WU_FadeInDelay=0 [2025-09-24 13:51:50.377] max_time_out=0 [2025-09-24 13:51:50.377] No splash screen [2025-09-24 13:51:50.377] stop dss Done [2025-09-24 13:51:50.394] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:51:50.409] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:51:50.425] /dev/mem opened. [2025-09-24 13:51:50.425] Memory mapped at address 0xffff94027000. [2025-09-24 13:51:50.451] Read at address 0x00600018 (0xffff94027018): 0x00000000 [2025-09-24 13:51:50.451] Write at address 0x00600018 (0xffff94027018): 0x00400040, readback 0x00400040 [2025-09-24 13:51:50.659] Loaded PowerVR consumer services. [2025-09-24 13:51:50.723] Waiting data available... [2025-09-24 13:51:50.754] 512+0 records in [2025-09-24 13:51:50.754] 512+0 records out [2025-09-24 13:51:50.771] Starting syslogd/klogd: done [2025-09-24 13:51:50.787] DML Start [2025-09-24 13:51:50.995] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:51:51.235] DML res1: 0 [2025-09-24 13:51:51.586] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:51:51.608] Read Success [2025-09-24 13:51:51.608] Verifying certificate... [2025-09-24 13:51:51.831] Verified OK [2025-09-24 13:51:51.863] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:51:53.509] Verified OK [2025-09-24 13:51:53.509] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:51:54.102] Verified OK [2025-09-24 13:51:54.102] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:51:56.707] fs.protected_hardlinks = 1 [2025-09-24 13:51:56.707] fs.protected_symlinks = 1 [2025-09-24 13:51:56.723] kernel.modules_disabled = 1 [2025-09-24 13:51:56.915] [2025-09-24 13:51:56.915] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:51:58.226] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:52:05.962] SBL1:1210.0.1.0 [2025-09-24 13:52:06.009] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:52:07.576] SBL2:1210.0.1.0 [2025-09-24 13:52:07.623] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:52:07.720] j-A [2025-09-24 13:52:15.074] The R5 Autosar Classic is running [2025-09-24 13:52:15.099] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:52:15.099] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:52:15.706] INIT: version 2.96 booting [2025-09-24 13:52:15.818] INIT: Entering runlevel: 5 [2025-09-24 13:52:15.979] mtd28 attached [2025-09-24 13:52:15.979] mtd24 attached [2025-09-24 13:52:15.995] mtd32 attached [2025-09-24 13:52:16.010] ubi0:animations is mounted. [2025-09-24 13:52:16.043] ubi1:textures is mounted. [2025-09-24 13:52:16.043] RTNETLINK answers: File exists [2025-09-24 13:52:16.102] ubi2:dml_code is mounted. [2025-09-24 13:52:16.102] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:52:16.102] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:52:16.102] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:52:16.102] data.LB_FadeInType0=100 [2025-09-24 13:52:16.102] data.CHLH_FadeInType0=0 [2025-09-24 13:52:16.102] data.WU_FadeInDelay=0 [2025-09-24 13:52:16.102] max_time_out=0 [2025-09-24 13:52:16.102] No splash screen [2025-09-24 13:52:16.102] stop dss Done [2025-09-24 13:52:16.102] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:52:16.102] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:52:16.174] /dev/mem opened. [2025-09-24 13:52:16.174] Memory mapped at address 0xffffa7a6f000. [2025-09-24 13:52:16.174] Read at address 0x00600018 (0xffffa7a6f018): 0x00000000 [2025-09-24 13:52:16.174] Write at address 0x00600018 (0xffffa7a6f018): 0x00400040, readback 0x00400040 [2025-09-24 13:52:16.174] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:52:16.190] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:52:16.286] Loaded PowerVR consumer services. [2025-09-24 13:52:16.462] Waiting data available... [2025-09-24 13:52:16.494] 512+0 records in [2025-09-24 13:52:16.494] 512+0 records out [2025-09-24 13:52:16.526] Starting syslogd/klogd: done [2025-09-24 13:52:16.542] DML Start [2025-09-24 13:52:16.750] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:52:17.005] DML res1: 0 [2025-09-24 13:52:17.341] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:52:17.357] Read Success [2025-09-24 13:52:17.357] Verifying certificate... [2025-09-24 13:52:17.613] Verified OK [2025-09-24 13:52:17.629] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:52:19.384] Verified OK [2025-09-24 13:52:19.384] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:52:19.848] Verified OK [2025-09-24 13:52:19.869] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:52:22.299] fs.protected_hardlinks = 1 [2025-09-24 13:52:22.330] fs.protected_symlinks = 1 [2025-09-24 13:52:22.330] kernel.modules_disabled = 1 [2025-09-24 13:52:22.506] [2025-09-24 13:52:22.506] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:52:24.037] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:52:31.685] SBL1:1210.0.1.0 [2025-09-24 13:52:31.733] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:52:33.300] SBL2:1210.0.1.0 [2025-09-24 13:52:33.348] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:52:33.459] j-A [2025-09-24 13:52:40.832] The R5 Autosar Classic is running [2025-09-24 13:52:40.832] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:52:40.832] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:52:41.440] INIT: version 2.96 booting [2025-09-24 13:52:41.551] INIT: Entering runlevel: 5 [2025-09-24 13:52:41.711] mtd32 attached [2025-09-24 13:52:41.711] mtd24 attached [2025-09-24 13:52:41.727] mtd28 attached [2025-09-24 13:52:41.775] RTNETLINK answers: File exists [2025-09-24 13:52:41.840] ubi0:dml_code is mounted. [2025-09-24 13:52:41.840] ubi2:animations is mounted. [2025-09-24 13:52:41.840] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:52:41.840] ubi1:textures is mounted. [2025-09-24 13:52:41.840] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:52:41.840] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:52:41.840] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:52:41.840] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:52:41.840] data.LB_FadeInType0=100 [2025-09-24 13:52:41.840] data.CHLH_FadeInType0=0 [2025-09-24 13:52:41.840] data.WU_FadeInDelay=0 [2025-09-24 13:52:41.840] max_time_out=0 [2025-09-24 13:52:41.840] No splash screen [2025-09-24 13:52:41.840] stop dss Done [2025-09-24 13:52:41.872] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:52:41.888] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:52:41.921] /dev/mem opened. [2025-09-24 13:52:41.921] Memory mapped at address 0xfffface78000. [2025-09-24 13:52:41.921] Read at address 0x00600018 (0xfffface78018): 0x00000000 [2025-09-24 13:52:41.921] Write at address 0x00600018 (0xfffface78018): 0x00400040, readback 0x00400040 [2025-09-24 13:52:42.001] Loaded PowerVR consumer services. [2025-09-24 13:52:42.193] Waiting data available... [2025-09-24 13:52:42.209] 512+0 records in [2025-09-24 13:52:42.209] 512+0 records out [2025-09-24 13:52:42.257] Starting syslogd/klogd: done [2025-09-24 13:52:42.273] DML Start [2025-09-24 13:52:42.448] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:52:42.689] DML res1: 0 [2025-09-24 13:52:43.073] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:52:43.094] Read Success [2025-09-24 13:52:43.094] Verifying certificate... [2025-09-24 13:52:43.317] Verified OK [2025-09-24 13:52:43.333] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:52:45.135] Verified OK [2025-09-24 13:52:45.135] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:52:45.648] Verified OK [2025-09-24 13:52:45.648] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:52:48.094] fs.protected_hardlinks = 1 [2025-09-24 13:52:48.110] fs.protected_symlinks = 1 [2025-09-24 13:52:48.110] kernel.modules_disabled = 1 [2025-09-24 13:52:48.301] [2025-09-24 13:52:48.301] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:52:49.699] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:52:57.429] SBL1:1210.0.1.0 [2025-09-24 13:52:57.477] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:52:59.044] SBL2:1210.0.1.0 [2025-09-24 13:52:59.091] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:52:59.203] j-A [2025-09-24 13:53:06.541] The R5 Autosar Classic is running [2025-09-24 13:53:06.566] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:53:06.566] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:53:07.174] INIT: version 2.96 booting [2025-09-24 13:53:07.285] INIT: Entering runlevel: 5 [2025-09-24 13:53:07.445] mtd28 attached [2025-09-24 13:53:07.445] mtd24 attached [2025-09-24 13:53:07.461] mtd32 attached [2025-09-24 13:53:07.565] ubi0:animations is mounted. [2025-09-24 13:53:07.565] RTNETLINK answers: File exists [2025-09-24 13:53:07.565] ubi1:textures is mounted. [2025-09-24 13:53:07.565] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:53:07.565] ubi2:dml_code is mounted. [2025-09-24 13:53:07.565] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:53:07.565] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:53:07.565] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:53:07.565] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:53:07.565] data.LB_FadeInType0=100 [2025-09-24 13:53:07.565] data.CHLH_FadeInType0=0 [2025-09-24 13:53:07.565] data.WU_FadeInDelay=0 [2025-09-24 13:53:07.565] max_time_out=0 [2025-09-24 13:53:07.565] No splash screen [2025-09-24 13:53:07.565] stop dss Done [2025-09-24 13:53:07.613] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:53:07.613] /dev/mem opened. [2025-09-24 13:53:07.613] Memory mapped at address 0xffffa7977000. [2025-09-24 13:53:07.645] Read at address 0x00600018 (0xffffa7977018): 0x00000000 [2025-09-24 13:53:07.645] Write at address 0x00600018 (0xffffa7977018): 0x00400040, readback 0x00400040 [2025-09-24 13:53:07.645] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:53:07.773] Loaded PowerVR consumer services. [2025-09-24 13:53:07.916] Waiting data available... [2025-09-24 13:53:07.948] 512+0 records in [2025-09-24 13:53:07.948] 512+0 records out [2025-09-24 13:53:07.981] Starting syslogd/klogd: done [2025-09-24 13:53:07.997] DML Start [2025-09-24 13:53:08.141] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:53:08.316] DML res1: 0 [2025-09-24 13:53:08.844] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:53:08.860] Read Success [2025-09-24 13:53:08.860] Verifying certificate... [2025-09-24 13:53:09.084] Verified OK [2025-09-24 13:53:09.116] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:53:10.741] Verified OK [2025-09-24 13:53:10.741] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:53:11.406] Verified OK [2025-09-24 13:53:11.406] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:53:12.126] 5476 GC [0] [2025-09-24 13:53:12.190] 5548 GC [1] [2025-09-24 13:53:12.270] 5615 GC [2] [2025-09-24 13:53:12.334] 5688 GC [3] [2025-09-24 13:53:12.414] 5765 GC [4] [2025-09-24 13:53:12.478] 5826 GC [5] [2025-09-24 13:53:12.558] 5905 GC [6] [2025-09-24 13:53:12.622] 5977 GC [7] [2025-09-24 13:53:12.702] 6044 GC [8] [2025-09-24 13:53:12.766] 6117 GC [9] [2025-09-24 13:53:12.845] 6194 GC [10] [2025-09-24 13:53:12.909] 6261 GC [11] [2025-09-24 13:53:12.973] 6328 GC [12] [2025-09-24 13:53:13.038] 6395 GC [13] [2025-09-24 13:53:13.102] 6453 GC [14] [2025-09-24 13:53:13.166] 6514 GC [15] [2025-09-24 13:53:13.229] 6577 GC [16] [2025-09-24 13:53:13.277] 6638 GC [17] [2025-09-24 13:53:13.341] 6686 GC [18] [2025-09-24 13:53:13.405] 6753 GC [19] [2025-09-24 13:53:13.454] 6804 GC [20] [2025-09-24 13:53:13.517] 6867 GC [21] [2025-09-24 13:53:13.581] 6923 GC [22] [2025-09-24 13:53:13.645] 6985 GC [23] [2025-09-24 13:53:13.693] 7046 GC [24] [2025-09-24 13:53:13.756] 7114 GC [25] [2025-09-24 13:53:13.820] 7177 GC [26] [2025-09-24 13:53:13.885] 7238 GC [27] [2025-09-24 13:53:13.949] 7298 GC [28] [2025-09-24 13:53:13.997] 7357 GC [29] [2025-09-24 13:53:14.013] GC DONE [2025-09-24 13:53:14.092] fs.protected_hardlinks = 1 [2025-09-24 13:53:14.092] fs.protected_symlinks = 1 [2025-09-24 13:53:14.108] kernel.modules_disabled = 1 [2025-09-24 13:53:14.300] [2025-09-24 13:53:14.300] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:53:15.392] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:53:23.171] SBL1:1210.0.1.0 [2025-09-24 13:53:23.219] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:53:24.786] SBL2:1210.0.1.0 [2025-09-24 13:53:24.818] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:53:24.930] j-A [2025-09-24 13:53:32.301] The R5 Autosar Classic is running [2025-09-24 13:53:32.301] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:53:32.301] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:53:32.909] INIT: version 2.96 booting [2025-09-24 13:53:33.004] INIT: Entering runlevel: 5 [2025-09-24 13:53:33.164] mtd28 attached [2025-09-24 13:53:33.180] mtd32 attached [2025-09-24 13:53:33.196] mtd24 attached [2025-09-24 13:53:33.212] ubi0:animations is mounted. [2025-09-24 13:53:33.244] RTNETLINK answers: File exists [2025-09-24 13:53:33.298] ubi2:textures is mounted. [2025-09-24 13:53:33.298] ubi1:dml_code is mounted. [2025-09-24 13:53:33.298] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:53:33.298] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:53:33.298] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:53:33.298] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:53:33.298] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:53:33.298] data.LB_FadeInType0=100 [2025-09-24 13:53:33.298] data.CHLH_FadeInType0=0 [2025-09-24 13:53:33.298] data.WU_FadeInDelay=0 [2025-09-24 13:53:33.298] max_time_out=0 [2025-09-24 13:53:33.298] No splash screen [2025-09-24 13:53:33.298] stop dss Done [2025-09-24 13:53:33.343] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:53:33.343] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:53:33.343] /dev/mem opened. [2025-09-24 13:53:33.375] Memory mapped at address 0xffff9afd2000. [2025-09-24 13:53:33.375] Read at address 0x00600018 (0xffff9afd2018): 0x00000000 [2025-09-24 13:53:33.375] Write at address 0x00600018 (0xffff9afd2018): 0x00400040, readback 0x00400040 [2025-09-24 13:53:33.471] Loaded PowerVR consumer services. [2025-09-24 13:53:33.629] Waiting data available... [2025-09-24 13:53:33.629] 512+0 records in [2025-09-24 13:53:33.629] 512+0 records out [2025-09-24 13:53:33.677] Starting syslogd/klogd: done [2025-09-24 13:53:33.694] DML Start [2025-09-24 13:53:33.886] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:53:34.093] DML res1: 0 [2025-09-24 13:53:34.507] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:53:34.507] Read Success [2025-09-24 13:53:34.507] Verifying certificate... [2025-09-24 13:53:34.731] Verified OK [2025-09-24 13:53:34.747] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:53:36.373] Verified OK [2025-09-24 13:53:36.373] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:53:37.019] Verified OK [2025-09-24 13:53:37.019] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:53:39.785] fs.protected_hardlinks = 1 [2025-09-24 13:53:39.785] fs.protected_symlinks = 1 [2025-09-24 13:53:39.801] kernel.modules_disabled = 1 [2025-09-24 13:53:39.993] [2025-09-24 13:53:39.993] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:53:41.192] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:53:48.881] SBL1:1210.0.1.0 [2025-09-24 13:53:48.930] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:53:50.497] SBL2:1210.0.1.0 [2025-09-24 13:53:50.545] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:53:50.641] j-A [2025-09-24 13:53:57.993] The R5 Autosar Classic is running [2025-09-24 13:53:58.015] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:53:58.015] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:53:58.623] INIT: version 2.96 booting [2025-09-24 13:53:58.735] INIT: Entering runlevel: 5 [2025-09-24 13:53:58.879] mtd24 attached [2025-09-24 13:53:58.895] mtd32 attached [2025-09-24 13:53:58.911] mtd28 attached [2025-09-24 13:53:58.959] ubi0:textures is mounted. [2025-09-24 13:53:58.959] RTNETLINK answers: File exists [2025-09-24 13:53:59.017] ubi1:dml_code is mounted. [2025-09-24 13:53:59.017] ubi2:animations is mounted. [2025-09-24 13:53:59.017] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:53:59.017] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:53:59.017] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:53:59.017] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:53:59.017] data.LB_FadeInType0=100 [2025-09-24 13:53:59.017] data.CHLH_FadeInType0=0 [2025-09-24 13:53:59.017] data.WU_FadeInDelay=0 [2025-09-24 13:53:59.017] max_time_out=0 [2025-09-24 13:53:59.017] No splash screen [2025-09-24 13:53:59.017] stop dss Done [2025-09-24 13:53:59.017] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:53:59.065] /dev/mem opened. [2025-09-24 13:53:59.065] Memory mapped at address 0xffffa3163000. [2025-09-24 13:53:59.090] Read at address 0x00600018 (0xffffa3163018): 0x00000000 [2025-09-24 13:53:59.090] Write at address 0x00600018 (0xffffa3163018): 0x00400040, readback 0x00400040 [2025-09-24 13:53:59.090] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:53:59.107] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:53:59.267] Loaded PowerVR consumer services. [2025-09-24 13:53:59.299] 512+0 records in [2025-09-24 13:53:59.299] 512+0 records out [2025-09-24 13:53:59.331] Starting syslogd/klogd: Waiting data available... [2025-09-24 13:53:59.347] done [2025-09-24 13:53:59.363] DML Start [2025-09-24 13:53:59.571] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:53:59.794] DML res1: 0 [2025-09-24 13:54:00.233] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:54:00.233] Read Success [2025-09-24 13:54:00.233] Verifying certificate... [2025-09-24 13:54:00.489] Verified OK [2025-09-24 13:54:00.505] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:54:02.196] Verified OK [2025-09-24 13:54:02.196] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:54:02.841] Verified OK [2025-09-24 13:54:02.841] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:54:05.445] fs.protected_hardlinks = 1 [2025-09-24 13:54:05.445] fs.protected_symlinks = 1 [2025-09-24 13:54:05.445] kernel.modules_disabled = 1 [2025-09-24 13:54:05.636] [2025-09-24 13:54:05.636] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:54:06.861] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:54:14.614] SBL1:1210.0.1.0 [2025-09-24 13:54:14.645] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:54:16.229] SBL2:1210.0.1.0 [2025-09-24 13:54:16.261] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:54:16.357] j-A [2025-09-24 13:54:23.710] The R5 Autosar Classic is running [2025-09-24 13:54:23.735] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:54:23.735] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:54:24.342] INIT: version 2.96 booting [2025-09-24 13:54:24.454] INIT: Entering runlevel: 5 [2025-09-24 13:54:24.615] mtd24 attached [2025-09-24 13:54:24.615] mtd28 attached [2025-09-24 13:54:24.630] mtd32 attached [2025-09-24 13:54:24.678] ubi0:textures is mounted. [2025-09-24 13:54:24.678] RTNETLINK answers: File exists [2025-09-24 13:54:24.744] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:54:24.744] ubi1:animations is mounted. [2025-09-24 13:54:24.744] ubi2:dml_code is mounted. [2025-09-24 13:54:24.744] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:54:24.744] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:54:24.744] data.LB_FadeInType0=100 [2025-09-24 13:54:24.744] data.CHLH_FadeInType0=0 [2025-09-24 13:54:24.744] data.WU_FadeInDelay=0 [2025-09-24 13:54:24.744] max_time_out=0 [2025-09-24 13:54:24.744] No splash screen [2025-09-24 13:54:24.744] stop dss Done [2025-09-24 13:54:24.744] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:54:24.744] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:54:24.809] /dev/mem opened. [2025-09-24 13:54:24.809] Memory mapped at address 0xffff8c655000. [2025-09-24 13:54:24.809] Read at address 0x00600018 (0xffff8c655018): 0x00000000 [2025-09-24 13:54:24.809] Write at address 0x00600018 (0xffff8c655018): 0x00400040, readback 0x00400040 [2025-09-24 13:54:24.809] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:54:24.831] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:54:24.895] Loaded PowerVR consumer services. [2025-09-24 13:54:25.051] 512+0 records in [2025-09-24 13:54:25.051] 512+0 records out [2025-09-24 13:54:25.051] Waiting data available... [2025-09-24 13:54:25.067] Starting syslogd/klogd: done [2025-09-24 13:54:25.083] DML Start [2025-09-24 13:54:25.274] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:54:25.530] DML res1: 0 [2025-09-24 13:54:25.925] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:54:25.925] Read Success [2025-09-24 13:54:25.925] Verifying certificate... [2025-09-24 13:54:26.197] Verified OK [2025-09-24 13:54:26.213] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:54:27.891] Verified OK [2025-09-24 13:54:27.891] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:54:28.460] Verified OK [2025-09-24 13:54:28.460] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:54:31.226] fs.protected_hardlinks = 1 [2025-09-24 13:54:31.226] fs.protected_symlinks = 1 [2025-09-24 13:54:31.242] kernel.modules_disabled = 1 [2025-09-24 13:54:31.433] [2025-09-24 13:54:31.433] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:54:32.600] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:54:40.322] SBL1:1210.0.1.0 [2025-09-24 13:54:40.370] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:54:41.936] SBL2:1210.0.1.0 [2025-09-24 13:54:41.984] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:54:42.080] j-A [2025-09-24 13:54:49.434] The R5 Autosar Classic is running [2025-09-24 13:54:49.454] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:54:49.454] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:54:50.062] INIT: version 2.96 booting [2025-09-24 13:54:50.174] INIT: Entering runlevel: 5 [2025-09-24 13:54:50.333] mtd32 attached [2025-09-24 13:54:50.333] mtd28 attached [2025-09-24 13:54:50.349] mtd24 attached [2025-09-24 13:54:50.397] RTNETLINK answers: File exists [2025-09-24 13:54:50.397] ubi0:dml_code is mounted. [2025-09-24 13:54:50.452] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:54:50.452] ubi2:textures is mounted. [2025-09-24 13:54:50.452] ubi1:animations is mounted. [2025-09-24 13:54:50.452] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:54:50.452] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:54:50.452] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:54:50.452] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:54:50.452] data.LB_FadeInType0=100 [2025-09-24 13:54:50.452] data.CHLH_FadeInType0=0 [2025-09-24 13:54:50.452] data.WU_FadeInDelay=0 [2025-09-24 13:54:50.452] max_time_out=0 [2025-09-24 13:54:50.452] No splash screen [2025-09-24 13:54:50.452] stop dss Done [2025-09-24 13:54:50.468] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:54:50.484] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:54:50.523] /dev/mem opened. [2025-09-24 13:54:50.523] Memory mapped at address 0xffffacaf0000. [2025-09-24 13:54:50.523] Read at address 0x00600018 (0xffffacaf0018): 0x00000000 [2025-09-24 13:54:50.523] Write at address 0x00600018 (0xffffacaf0018): 0x00400040, readback 0x00400040 [2025-09-24 13:54:50.716] Loaded PowerVR consumer services. [2025-09-24 13:54:50.731] 512+0 records in [2025-09-24 13:54:50.731] 512+0 records out [2025-09-24 13:54:50.779] Waiting data available... [2025-09-24 13:54:50.795] Starting syslogd/klogd: done [2025-09-24 13:54:50.811] DML Start [2025-09-24 13:54:50.971] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:54:51.147] DML res1: 0 [2025-09-24 13:54:51.706] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:54:51.727] Read Success [2025-09-24 13:54:51.727] Verifying certificate... [2025-09-24 13:54:51.967] Verified OK [2025-09-24 13:54:51.983] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:54:53.703] Verified OK [2025-09-24 13:54:53.703] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:54:54.306] Verified OK [2025-09-24 13:54:54.306] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:54:56.944] fs.protected_hardlinks = 1 [2025-09-24 13:54:56.961] fs.protected_symlinks = 1 [2025-09-24 13:54:56.977] kernel.modules_disabled = 1 [2025-09-24 13:54:57.168] [2025-09-24 13:54:57.168] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:54:58.291] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:55:06.059] SBL1:1210.0.1.0 [2025-09-24 13:55:06.106] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:55:07.673] SBL2:1210.0.1.0 [2025-09-24 13:55:07.705] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:55:07.817] j-A [2025-09-24 13:55:15.171] The R5 Autosar Classic is running [2025-09-24 13:55:15.171] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:55:15.192] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:55:15.799] INIT: version 2.96 booting [2025-09-24 13:55:15.911] INIT: Entering runlevel: 5 [2025-09-24 13:55:16.070] mtd24 attached [2025-09-24 13:55:16.070] mtd28 attached [2025-09-24 13:55:16.086] mtd32 attached [2025-09-24 13:55:16.134] RTNETLINK answers: File exists [2025-09-24 13:55:16.179] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:55:16.179] ubi0:textures is mounted. [2025-09-24 13:55:16.179] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:55:16.179] ubi2:dml_code is mounted. [2025-09-24 13:55:16.179] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:55:16.179] ubi1:animations is mounted. [2025-09-24 13:55:16.179] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:55:16.179] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:55:16.207] data.LB_FadeInType0=100 [2025-09-24 13:55:16.207] data.CHLH_FadeInType0=0 [2025-09-24 13:55:16.207] data.WU_FadeInDelay=0 [2025-09-24 13:55:16.207] max_time_out=0 [2025-09-24 13:55:16.207] No splash screen [2025-09-24 13:55:16.207] stop dss Done [2025-09-24 13:55:16.230] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:55:16.230] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:55:16.262] /dev/mem opened. [2025-09-24 13:55:16.294] Memory mapped at address 0xffffb9b6e000. [2025-09-24 13:55:16.294] Read at address 0x00600018 (0xffffb9b6e018): 0x00000000 [2025-09-24 13:55:16.294] Write at address 0x00600018 (0xffffb9b6e018): 0x00400040, readback 0x00400040 [2025-09-24 13:55:16.437] Loaded PowerVR consumer services. [2025-09-24 13:55:16.485] 512+0 records in [2025-09-24 13:55:16.485] 512+0 records out [2025-09-24 13:55:16.501] Waiting data available... [2025-09-24 13:55:16.517] Starting syslogd/klogd: done [2025-09-24 13:55:16.533] DML Start [2025-09-24 13:55:16.693] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:55:16.932] DML res1: 0 [2025-09-24 13:55:17.380] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:55:17.401] Read Success [2025-09-24 13:55:17.401] Verifying certificate... [2025-09-24 13:55:17.673] Verified OK [2025-09-24 13:55:17.689] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:55:19.382] Verified OK [2025-09-24 13:55:19.382] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:55:20.076] Verified OK [2025-09-24 13:55:20.076] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:55:22.634] fs.protected_hardlinks = 1 [2025-09-24 13:55:22.650] fs.protected_symlinks = 1 [2025-09-24 13:55:22.665] kernel.modules_disabled = 1 [2025-09-24 13:55:22.874] [2025-09-24 13:55:22.874] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:55:24.038] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:55:31.800] SBL1:1210.0.1.0 [2025-09-24 13:55:31.832] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:55:33.415] SBL2:1210.0.1.0 [2025-09-24 13:55:33.447] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:55:33.558] j-A [2025-09-24 13:55:40.927] The R5 Autosar Classic is running [2025-09-24 13:55:40.927] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:55:40.927] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:55:41.534] INIT: version 2.96 booting [2025-09-24 13:55:41.646] INIT: Entering runlevel: 5 [2025-09-24 13:55:41.806] mtd24 attached [2025-09-24 13:55:41.806] mtd28 attached [2025-09-24 13:55:41.822] mtd32 attached [2025-09-24 13:55:41.870] ubi0:textures is mounted. [2025-09-24 13:55:41.907] ubi1:animations is mounted. [2025-09-24 13:55:41.907] RTNETLINK answers: File exists [2025-09-24 13:55:41.907] ubi2:dml_code is mounted. [2025-09-24 13:55:41.907] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:55:41.907] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:55:41.907] data.LB_FadeInType0=100 [2025-09-24 13:55:41.938] data.CHLH_FadeInType0=0 [2025-09-24 13:55:41.938] data.WU_FadeInDelay=0 [2025-09-24 13:55:41.938] max_time_out=0 [2025-09-24 13:55:41.938] No splash screen [2025-09-24 13:55:41.938] stop dss Done [2025-09-24 13:55:41.938] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:55:41.938] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:55:41.938] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:55:41.970] /dev/mem opened. [2025-09-24 13:55:41.970] Memory mapped at address 0xffff9d0af000. [2025-09-24 13:55:41.996] Read at address 0x00600018 (0xffff9d0af018): 0x00000000 [2025-09-24 13:55:41.996] Write at address 0x00600018 (0xffff9d0af018): 0x00400040, readback 0x00400040 [2025-09-24 13:55:42.028] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:55:42.060] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:55:42.204] Loaded PowerVR consumer services. [2025-09-24 13:55:42.220] 512+0 records in [2025-09-24 13:55:42.220] 512+0 records out [2025-09-24 13:55:42.268] Starting syslogd/klogd: done [2025-09-24 13:55:42.284] Waiting data available... [2025-09-24 13:55:42.300] DML Start [2025-09-24 13:55:42.475] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:55:42.700] DML res1: 0 [2025-09-24 13:55:43.173] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:55:43.173] Read Success [2025-09-24 13:55:43.173] Verifying certificate... [2025-09-24 13:55:43.397] Verified OK [2025-09-24 13:55:43.413] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:55:45.235] Verified OK [2025-09-24 13:55:45.235] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:55:45.770] Verified OK [2025-09-24 13:55:45.770] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:55:48.169] fs.protected_hardlinks = 1 [2025-09-24 13:55:48.184] fs.protected_symlinks = 1 [2025-09-24 13:55:48.184] kernel.modules_disabled = 1 [2025-09-24 13:55:48.376] [2025-09-24 13:55:48.376] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:55:49.799] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:55:57.501] SBL1:1210.0.1.0 [2025-09-24 13:55:57.549] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:55:59.116] SBL2:1210.0.1.0 [2025-09-24 13:55:59.164] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:55:59.259] j-A [2025-09-24 13:56:06.614] The R5 Autosar Classic is running [2025-09-24 13:56:06.636] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:56:06.636] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:56:07.243] INIT: version 2.96 booting [2025-09-24 13:56:07.355] INIT: Entering runlevel: 5 [2025-09-24 13:56:07.515] mtd32 attached [2025-09-24 13:56:07.515] mtd28 attached [2025-09-24 13:56:07.531] mtd24 attached [2025-09-24 13:56:07.579] RTNETLINK answers: File exists [2025-09-24 13:56:07.644] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:56:07.644] ubi0:dml_code is mounted. [2025-09-24 13:56:07.645] ubi2:textures is mounted. [2025-09-24 13:56:07.645] ubi1:animations is mounted. [2025-09-24 13:56:07.645] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:56:07.645] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:56:07.645] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:56:07.645] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:56:07.645] data.LB_FadeInType0=100 [2025-09-24 13:56:07.645] data.CHLH_FadeInType0=0 [2025-09-24 13:56:07.645] data.WU_FadeInDelay=0 [2025-09-24 13:56:07.645] max_time_out=0 [2025-09-24 13:56:07.645] No splash screen [2025-09-24 13:56:07.645] stop dss Done [2025-09-24 13:56:07.676] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:56:07.717] /dev/mem opened. [2025-09-24 13:56:07.717] Memory mapped at address 0xffffaab74000. [2025-09-24 13:56:07.717] Read at address 0x00600018 (0xffffaab74018): 0x00000000 [2025-09-24 13:56:07.717] Write at address 0x00600018 (0xffffaab74018): 0x00400040, readback 0x00400040 [2025-09-24 13:56:07.717] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:56:07.893] Loaded PowerVR consumer services. [2025-09-24 13:56:07.952] 512+0 records in [2025-09-24 13:56:07.952] 512+0 records out [2025-09-24 13:56:07.952] Waiting data available... [2025-09-24 13:56:07.984] Starting syslogd/klogd: done [2025-09-24 13:56:08.000] DML Start [2025-09-24 13:56:08.193] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:56:08.417] DML res1: 0 [2025-09-24 13:56:08.878] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:56:08.878] Read Success [2025-09-24 13:56:08.878] Verifying certificate... [2025-09-24 13:56:09.102] Verified OK [2025-09-24 13:56:09.117] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:56:10.669] Verified OK [2025-09-24 13:56:10.669] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:56:11.338] Verified OK [2025-09-24 13:56:11.338] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:56:14.072] fs.protected_hardlinks = 1 [2025-09-24 13:56:14.088] fs.protected_symlinks = 1 [2025-09-24 13:56:14.088] kernel.modules_disabled = 1 [2025-09-24 13:56:14.279] [2025-09-24 13:56:14.279] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:56:15.509] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:56:23.232] SBL1:1210.0.1.0 [2025-09-24 13:56:23.280] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:56:24.847] SBL2:1210.0.1.0 [2025-09-24 13:56:24.878] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:56:24.990] j-A [2025-09-24 13:56:32.365] The R5 Autosar Classic is running [2025-09-24 13:56:32.365] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:56:32.365] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:56:32.972] INIT: version 2.96 booting [2025-09-24 13:56:33.068] INIT: Entering runlevel: 5 [2025-09-24 13:56:33.229] mtd24 attached [2025-09-24 13:56:33.229] mtd28 attached [2025-09-24 13:56:33.245] mtd32 attached [2025-09-24 13:56:33.292] ubi1:animations is mounted. [2025-09-24 13:56:33.292] ubi0:textures is mounted. [2025-09-24 13:56:33.350] RTNETLINK answers: File exists [2025-09-24 13:56:33.350] ubi2:dml_code is mounted. [2025-09-24 13:56:33.350] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:56:33.350] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:56:33.350] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:56:33.350] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:56:33.350] data.LB_FadeInType0=100 [2025-09-24 13:56:33.350] data.CHLH_FadeInType0=0 [2025-09-24 13:56:33.350] data.WU_FadeInDelay=0 [2025-09-24 13:56:33.350] max_time_out=0 [2025-09-24 13:56:33.350] No splash screen [2025-09-24 13:56:33.350] stop dss Done [2025-09-24 13:56:33.350] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:56:33.398] /dev/mem opened. [2025-09-24 13:56:33.398] Memory mapped at address 0xffffa1f1d000. [2025-09-24 13:56:33.434] Read at address 0x00600018 (0xffffa1f1d018): 0x00000000 [2025-09-24 13:56:33.434] Write at address 0x00600018 (0xffffa1f1d018): 0x00400040, readback 0x00400040 [2025-09-24 13:56:33.434] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:56:33.434] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:56:33.562] Loaded PowerVR consumer services. [2025-09-24 13:56:33.642] 512+0 records in [2025-09-24 13:56:33.642] 512+0 records out [2025-09-24 13:56:33.674] Waiting data available... [2025-09-24 13:56:33.690] Starting syslogd/klogd: done [2025-09-24 13:56:33.706] DML Start [2025-09-24 13:56:33.897] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:56:34.137] DML res1: 0 [2025-09-24 13:56:34.538] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:56:34.559] Read Success [2025-09-24 13:56:34.559] Verifying certificate... [2025-09-24 13:56:34.782] Verified OK [2025-09-24 13:56:34.798] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:56:36.487] Verified OK [2025-09-24 13:56:36.487] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:56:37.126] Verified OK [2025-09-24 13:56:37.142] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:56:39.795] fs.protected_hardlinks = 1 [2025-09-24 13:56:39.795] fs.protected_symlinks = 1 [2025-09-24 13:56:39.811] kernel.modules_disabled = 1 [2025-09-24 13:56:40.003] [2025-09-24 13:56:40.003] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:56:41.249] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:56:48.956] SBL1:1210.0.1.0 [2025-09-24 13:56:49.004] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:56:50.571] SBL2:1210.0.1.0 [2025-09-24 13:56:50.603] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:56:50.715] j-A [2025-09-24 13:56:58.090] The R5 Autosar Classic is running [2025-09-24 13:56:58.090] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:56:58.090] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:56:58.698] INIT: version 2.96 booting [2025-09-24 13:56:58.809] INIT: Entering runlevel: 5 [2025-09-24 13:56:58.953] mtd24 attached [2025-09-24 13:56:58.969] mtd28 attached [2025-09-24 13:56:58.985] mtd32 attached [2025-09-24 13:56:59.017] ubi0:textures is mounted. [2025-09-24 13:56:59.033] RTNETLINK answers: File exists [2025-09-24 13:56:59.033] ubi1:animations is mounted. [2025-09-24 13:56:59.096] ubi2:dml_code is mounted. [2025-09-24 13:56:59.096] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:56:59.096] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:56:59.096] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:56:59.096] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:56:59.096] data.LB_FadeInType0=100 [2025-09-24 13:56:59.096] data.CHLH_FadeInType0=0 [2025-09-24 13:56:59.096] data.WU_FadeInDelay=0 [2025-09-24 13:56:59.096] max_time_out=0 [2025-09-24 13:56:59.096] No splash screen [2025-09-24 13:56:59.096] stop dss Done [2025-09-24 13:56:59.096] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:56:59.128] /dev/mem opened. [2025-09-24 13:56:59.165] Memory mapped at address 0xffffbc0aa000. [2025-09-24 13:56:59.165] Read at address 0x00600018 (0xffffbc0aa018): 0x00000000 [2025-09-24 13:56:59.165] Write at address 0x00600018 (0xffffbc0aa018): 0x00400040, readback 0x00400040 [2025-09-24 13:56:59.165] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:56:59.165] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:56:59.325] Loaded PowerVR consumer services. [2025-09-24 13:56:59.340] 512+0 records in [2025-09-24 13:56:59.340] 512+0 records out [2025-09-24 13:56:59.420] Starting syslogd/klogd: Waiting data available... [2025-09-24 13:56:59.436] done [2025-09-24 13:56:59.436] DML Start [2025-09-24 13:56:59.612] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:56:59.837] DML res1: 0 [2025-09-24 13:57:00.421] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:57:00.421] Read Success [2025-09-24 13:57:00.421] Verifying certificate... [2025-09-24 13:57:00.643] Verified OK [2025-09-24 13:57:00.659] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:57:02.512] Verified OK [2025-09-24 13:57:02.512] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:57:03.168] Verified OK [2025-09-24 13:57:03.168] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:57:05.806] fs.protected_hardlinks = 1 [2025-09-24 13:57:05.822] fs.protected_symlinks = 1 [2025-09-24 13:57:05.838] kernel.modules_disabled = 1 [2025-09-24 13:57:06.029] [2025-09-24 13:57:06.029] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:57:07.153] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:57:14.674] SBL1:1210.0.1.0 [2025-09-24 13:57:14.706] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:57:16.289] SBL2:1210.0.1.0 [2025-09-24 13:57:16.321] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:57:16.416] j-A [2025-09-24 13:57:23.771] The R5 Autosar Classic is running [2025-09-24 13:57:23.793] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:57:23.793] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:57:24.401] INIT: version 2.96 booting [2025-09-24 13:57:24.513] INIT: Entering runlevel: 5 [2025-09-24 13:57:24.673] mtd24 attached [2025-09-24 13:57:24.689] mtd32 attached [2025-09-24 13:57:24.689] mtd28 attached [2025-09-24 13:57:24.736] RTNETLINK answers: File exists [2025-09-24 13:57:24.802] ubi0:textures is mounted. [2025-09-24 13:57:24.802] ubi1:dml_code is mounted. [2025-09-24 13:57:24.802] ubi2:animations is mounted. [2025-09-24 13:57:24.802] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:57:24.802] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:57:24.802] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:57:24.802] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:57:24.802] data.LB_FadeInType0=100 [2025-09-24 13:57:24.802] data.CHLH_FadeInType0=0 [2025-09-24 13:57:24.802] data.WU_FadeInDelay=0 [2025-09-24 13:57:24.802] max_time_out=0 [2025-09-24 13:57:24.802] No splash screen [2025-09-24 13:57:24.802] stop dss Done [2025-09-24 13:57:24.802] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:57:24.850] /dev/mem opened. [2025-09-24 13:57:24.850] Memory mapped at address 0xffff9bf34000. [2025-09-24 13:57:24.877] Read at address 0x00600018 (0xffff9bf34018): 0x00000000 [2025-09-24 13:57:24.877] Write at address 0x00600018 (0xffff9bf34018): 0x00400040, readback 0x00400040 [2025-09-24 13:57:24.877] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:57:24.893] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:57:25.085] Loaded PowerVR consumer services. [2025-09-24 13:57:25.116] 512+0 records in [2025-09-24 13:57:25.116] 512+0 records out [2025-09-24 13:57:25.132] Waiting data available... [2025-09-24 13:57:25.148] Starting syslogd/klogd: done [2025-09-24 13:57:25.180] DML Start [2025-09-24 13:57:25.341] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:57:25.564] DML res1: 0 [2025-09-24 13:57:26.039] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:57:26.039] Read Success [2025-09-24 13:57:26.039] Verifying certificate... [2025-09-24 13:57:26.295] Verified OK [2025-09-24 13:57:26.311] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:57:27.936] Verified OK [2025-09-24 13:57:27.936] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:57:28.537] Verified OK [2025-09-24 13:57:28.537] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:57:31.110] fs.protected_hardlinks = 1 [2025-09-24 13:57:31.110] fs.protected_symlinks = 1 [2025-09-24 13:57:31.126] kernel.modules_disabled = 1 [2025-09-24 13:57:31.317] [2025-09-24 13:57:31.317] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:57:32.668] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:57:40.402] SBL1:1210.0.1.0 [2025-09-24 13:57:40.450] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:57:42.017] SBL2:1210.0.1.0 [2025-09-24 13:57:42.049] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:57:42.160] j-A [2025-09-24 13:57:49.533] The R5 Autosar Classic is running [2025-09-24 13:57:49.533] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:57:49.533] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:57:50.141] INIT: version 2.96 booting [2025-09-24 13:57:50.253] INIT: Entering runlevel: 5 [2025-09-24 13:57:50.413] mtd28 attached [2025-09-24 13:57:50.429] mtd24 attached [2025-09-24 13:57:50.445] mtd32 attached [2025-09-24 13:57:50.461] ubi0:animations is mounted. [2025-09-24 13:57:50.520] RTNETLINK answers: File exists [2025-09-24 13:57:50.520] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:57:50.520] ubi1:textures is mounted. [2025-09-24 13:57:50.520] ubi2:dml_code is mounted. [2025-09-24 13:57:50.520] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:57:50.520] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:57:50.520] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:57:50.520] data.LB_FadeInType0=100 [2025-09-24 13:57:50.545] data.CHLH_FadeInType0=0 [2025-09-24 13:57:50.545] data.WU_FadeInDelay=0 [2025-09-24 13:57:50.545] max_time_out=0 [2025-09-24 13:57:50.545] No splash screen [2025-09-24 13:57:50.545] stop dss Done [2025-09-24 13:57:50.545] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:57:50.585] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:57:50.585] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:57:50.585] /dev/mem opened. [2025-09-24 13:57:50.618] Memory mapped at address 0xffff9c4f4000. [2025-09-24 13:57:50.618] Read at address 0x00600018 (0xffff9c4f4018): 0x00000000 [2025-09-24 13:57:50.618] Write at address 0x00600018 (0xffff9c4f4018): 0x00400040, readback 0x00400040 [2025-09-24 13:57:50.713] Loaded PowerVR consumer services. [2025-09-24 13:57:50.852] 512+0 records in [2025-09-24 13:57:50.852] 512+0 records out [2025-09-24 13:57:50.852] Waiting data available... [2025-09-24 13:57:50.884] Starting syslogd/klogd: done [2025-09-24 13:57:50.900] DML Start [2025-09-24 13:57:51.044] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:57:51.300] DML res1: 0 [2025-09-24 13:57:51.793] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:57:51.793] Read Success [2025-09-24 13:57:51.793] Verifying certificate... [2025-09-24 13:57:52.049] Verified OK [2025-09-24 13:57:52.049] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:57:53.823] Verified OK [2025-09-24 13:57:53.823] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:57:54.456] Verified OK [2025-09-24 13:57:54.456] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:57:57.014] fs.protected_hardlinks = 1 [2025-09-24 13:57:57.014] fs.protected_symlinks = 1 [2025-09-24 13:57:57.030] kernel.modules_disabled = 1 [2025-09-24 13:57:57.221] [2025-09-24 13:57:57.221] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:57:58.399] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:58:06.108] SBL1:1210.0.1.0 [2025-09-24 13:58:06.155] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:58:07.721] SBL2:1210.0.1.0 [2025-09-24 13:58:07.754] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:58:07.865] j-A [2025-09-24 13:58:15.238] The R5 Autosar Classic is running [2025-09-24 13:58:15.238] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:58:15.238] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:58:15.845] INIT: version 2.96 booting [2025-09-24 13:58:15.958] INIT: Entering runlevel: 5 [2025-09-24 13:58:16.117] mtd32 attached [2025-09-24 13:58:16.117] mtd24 attached [2025-09-24 13:58:16.133] mtd28 attached [2025-09-24 13:58:16.181] ubi0:dml_code is mounted. [2025-09-24 13:58:16.181] RTNETLINK answers: File exists [2025-09-24 13:58:16.241] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:58:16.241] ubi2:animations is mounted. [2025-09-24 13:58:16.241] ubi1:textures is mounted. [2025-09-24 13:58:16.241] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:58:16.241] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:58:16.241] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:58:16.241] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:58:16.241] data.LB_FadeInType0=100 [2025-09-24 13:58:16.241] data.CHLH_FadeInType0=0 [2025-09-24 13:58:16.241] data.WU_FadeInDelay=0 [2025-09-24 13:58:16.241] max_time_out=0 [2025-09-24 13:58:16.241] No splash screen [2025-09-24 13:58:16.241] stop dss Done [2025-09-24 13:58:16.315] /dev/mem opened. [2025-09-24 13:58:16.315] Memory mapped at address 0xffff8a15a000. [2025-09-24 13:58:16.315] Read at address 0x00600018 (0xffff8a15a018): 0x00000000 [2025-09-24 13:58:16.315] Write at address 0x00600018 (0xffff8a15a018): 0x00400040, readback 0x00400040 [2025-09-24 13:58:16.331] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:58:16.331] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:58:16.490] Loaded PowerVR consumer services. [2025-09-24 13:58:16.522] 512+0 records in [2025-09-24 13:58:16.522] 512+0 records out [2025-09-24 13:58:16.570] Waiting data available... [2025-09-24 13:58:16.570] Starting syslogd/klogd: done [2025-09-24 13:58:16.602] DML Start [2025-09-24 13:58:16.762] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:58:17.001] DML res1: 0 [2025-09-24 13:58:17.475] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:58:17.475] Read Success [2025-09-24 13:58:17.475] Verifying certificate... [2025-09-24 13:58:17.714] Verified OK [2025-09-24 13:58:17.746] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:58:19.458] Verified OK [2025-09-24 13:58:19.458] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:58:20.128] Verified OK [2025-09-24 13:58:20.128] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:58:22.702] fs.protected_hardlinks = 1 [2025-09-24 13:58:22.702] fs.protected_symlinks = 1 [2025-09-24 13:58:22.718] kernel.modules_disabled = 1 [2025-09-24 13:58:22.893] [2025-09-24 13:58:22.893] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:58:24.091] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:58:31.823] SBL1:1210.0.1.0 [2025-09-24 13:58:31.870] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:58:33.437] SBL2:1210.0.1.0 [2025-09-24 13:58:33.469] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:58:33.582] j-A [2025-09-24 13:58:40.955] The R5 Autosar Classic is running [2025-09-24 13:58:40.955] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:58:40.955] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:58:41.563] INIT: version 2.96 booting [2025-09-24 13:58:41.674] INIT: Entering runlevel: 5 [2025-09-24 13:58:41.835] mtd32 attached [2025-09-24 13:58:41.835] mtd28 attached [2025-09-24 13:58:41.851] mtd24 attached [2025-09-24 13:58:41.866] ubi0:dml_code is mounted. [2025-09-24 13:58:41.899] RTNETLINK answers: File exists [2025-09-24 13:58:41.956] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:58:41.956] ubi1:animations is mounted. [2025-09-24 13:58:41.956] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:58:41.956] ubi2:textures is mounted. [2025-09-24 13:58:41.956] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:58:41.956] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:58:41.956] data.LB_FadeInType0=100 [2025-09-24 13:58:41.956] data.CHLH_FadeInType0=0 [2025-09-24 13:58:41.956] data.WU_FadeInDelay=0 [2025-09-24 13:58:41.956] max_time_out=0 [2025-09-24 13:58:41.956] No splash screen [2025-09-24 13:58:41.956] stop dss Done [2025-09-24 13:58:41.956] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:58:41.999] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:58:41.999] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:58:42.034] /dev/mem opened. [2025-09-24 13:58:42.034] Memory mapped at address 0xffff904a8000. [2025-09-24 13:58:42.034] Read at address 0x00600018 (0xffff904a8018): 0x00000000 [2025-09-24 13:58:42.034] Write at address 0x00600018 (0xffff904a8018): 0x00400040, readback 0x00400040 [2025-09-24 13:58:42.194] Loaded PowerVR consumer services. [2025-09-24 13:58:42.266] Waiting data available... [2025-09-24 13:58:42.266] 512+0 records in [2025-09-24 13:58:42.266] 512+0 records out [2025-09-24 13:58:42.297] Starting syslogd/klogd: done [2025-09-24 13:58:42.313] DML Start [2025-09-24 13:58:42.505] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:58:42.745] DML res1: 0 [2025-09-24 13:58:43.207] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:58:43.207] Read Success [2025-09-24 13:58:43.207] Verifying certificate... [2025-09-24 13:58:43.432] Verified OK [2025-09-24 13:58:43.447] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:58:45.283] Verified OK [2025-09-24 13:58:45.283] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:58:45.836] Verified OK [2025-09-24 13:58:45.836] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:58:48.218] fs.protected_hardlinks = 1 [2025-09-24 13:58:48.234] fs.protected_symlinks = 1 [2025-09-24 13:58:48.234] kernel.modules_disabled = 1 [2025-09-24 13:58:48.442] [2025-09-24 13:58:48.442] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:58:49.793] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:58:57.571] SBL1:1210.0.1.0 [2025-09-24 13:58:57.603] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:58:59.186] SBL2:1210.0.1.0 [2025-09-24 13:58:59.218] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:58:59.313] j-A [2025-09-24 13:59:06.666] The R5 Autosar Classic is running [2025-09-24 13:59:06.692] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:59:06.692] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:59:07.299] INIT: version 2.96 booting [2025-09-24 13:59:07.411] INIT: Entering runlevel: 5 [2025-09-24 13:59:07.571] mtd24 attached [2025-09-24 13:59:07.571] mtd28 attached [2025-09-24 13:59:07.587] mtd32 attached [2025-09-24 13:59:07.634] RTNETLINK answers: File exists [2025-09-24 13:59:07.702] ubi2:dml_code is mounted. [2025-09-24 13:59:07.702] ubi0:textures is mounted. [2025-09-24 13:59:07.702] ubi1:animations is mounted. [2025-09-24 13:59:07.702] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:59:07.702] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:59:07.702] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:59:07.702] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:59:07.702] data.LB_FadeInType0=100 [2025-09-24 13:59:07.702] data.CHLH_FadeInType0=0 [2025-09-24 13:59:07.702] data.WU_FadeInDelay=0 [2025-09-24 13:59:07.702] max_time_out=0 [2025-09-24 13:59:07.702] No splash screen [2025-09-24 13:59:07.702] stop dss Done [2025-09-24 13:59:07.702] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:59:07.734] /dev/mem opened. [2025-09-24 13:59:07.766] Memory mapped at address 0xffffbf2cd000. [2025-09-24 13:59:07.766] Read at address 0x00600018 (0xffffbf2cd018): 0x00000000 [2025-09-24 13:59:07.766] Write at address 0x00600018 (0xffffbf2cd018): 0x00400040, readback 0x00400040 [2025-09-24 13:59:07.766] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:59:07.798] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:59:07.942] Loaded PowerVR consumer services. [2025-09-24 13:59:07.990] 512+0 records in [2025-09-24 13:59:07.990] 512+0 records out [2025-09-24 13:59:08.022] Waiting data available... [2025-09-24 13:59:08.054] Starting syslogd/klogd: done [2025-09-24 13:59:08.070] DML Start [2025-09-24 13:59:08.245] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:59:08.469] DML res1: 0 [2025-09-24 13:59:08.947] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:59:08.947] Read Success [2025-09-24 13:59:08.947] Verifying certificate... [2025-09-24 13:59:09.235] Verified OK [2025-09-24 13:59:09.250] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:59:10.834] Verified OK [2025-09-24 13:59:10.834] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:59:11.471] Verified OK [2025-09-24 13:59:11.471] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:59:14.124] fs.protected_hardlinks = 1 [2025-09-24 13:59:14.124] fs.protected_symlinks = 1 [2025-09-24 13:59:14.140] kernel.modules_disabled = 1 [2025-09-24 13:59:14.332] [2025-09-24 13:59:14.332] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:59:15.577] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:59:23.284] SBL1:1210.0.1.0 [2025-09-24 13:59:23.316] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:59:24.882] SBL2:1210.0.1.0 [2025-09-24 13:59:24.930] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:59:25.026] j-A [2025-09-24 13:59:32.380] The R5 Autosar Classic is running [2025-09-24 13:59:32.404] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:59:32.404] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:59:33.011] INIT: version 2.96 booting [2025-09-24 13:59:33.122] INIT: Entering runlevel: 5 [2025-09-24 13:59:33.283] mtd24 attached [2025-09-24 13:59:33.283] mtd28 attached [2025-09-24 13:59:33.299] mtd32 attached [2025-09-24 13:59:33.331] ubi1:animations is mounted. [2025-09-24 13:59:33.347] RTNETLINK answers: File exists [2025-09-24 13:59:33.409] ubi0:textures is mounted. [2025-09-24 13:59:33.409] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:59:33.409] ubi2:dml_code is mounted. [2025-09-24 13:59:33.409] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:59:33.409] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:59:33.409] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:59:33.409] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:59:33.409] data.LB_FadeInType0=100 [2025-09-24 13:59:33.409] data.CHLH_FadeInType0=0 [2025-09-24 13:59:33.409] data.WU_FadeInDelay=0 [2025-09-24 13:59:33.409] max_time_out=0 [2025-09-24 13:59:33.409] No splash screen [2025-09-24 13:59:33.409] stop dss Done [2025-09-24 13:59:33.441] /dev/mem opened. [2025-09-24 13:59:33.441] Memory mapped at address 0xffffbe40f000. [2025-09-24 13:59:33.466] Read at address 0x00600018 (0xffffbe40f018): 0x00000000 [2025-09-24 13:59:33.466] Write at address 0x00600018 (0xffffbe40f018): 0x00400040, readback 0x00400040 [2025-09-24 13:59:33.482] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:59:33.498] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:59:33.579] Loaded PowerVR consumer services. [2025-09-24 13:59:33.722] 512+0 records in [2025-09-24 13:59:33.722] 512+0 records out [2025-09-24 13:59:33.722] Waiting data available... [2025-09-24 13:59:33.753] Starting syslogd/klogd: done [2025-09-24 13:59:33.769] DML Start [2025-09-24 13:59:33.962] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:59:34.217] DML res1: 0 [2025-09-24 13:59:34.649] Read DML Algo certificate (mtd31) and save to file [2025-09-24 13:59:34.665] Read Success [2025-09-24 13:59:34.665] Verifying certificate... [2025-09-24 13:59:34.905] Verified OK [2025-09-24 13:59:34.921] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 13:59:36.599] Verified OK [2025-09-24 13:59:36.615] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 13:59:37.215] Verified OK [2025-09-24 13:59:37.215] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 13:59:39.837] fs.protected_hardlinks = 1 [2025-09-24 13:59:39.837] fs.protected_symlinks = 1 [2025-09-24 13:59:39.853] kernel.modules_disabled = 1 [2025-09-24 13:59:40.045] [2025-09-24 13:59:40.045] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 13:59:41.285] RTNETLINK answers: Cannot assign requested address [2025-09-24 13:59:49.000] SBL1:1210.0.1.0 [2025-09-24 13:59:49.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:59:50.615] SBL2:1210.0.1.0 [2025-09-24 13:59:50.648] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 13:59:50.759] j-A [2025-09-24 13:59:58.096] The R5 Autosar Classic is running [2025-09-24 13:59:58.127] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 13:59:58.127] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 13:59:58.735] INIT: version 2.96 booting [2025-09-24 13:59:58.846] INIT: Entering runlevel: 5 [2025-09-24 13:59:58.991] mtd24 attached [2025-09-24 13:59:59.007] mtd28 attached [2025-09-24 13:59:59.023] mtd32 attached [2025-09-24 13:59:59.117] RTNETLINK answers: File exists [2025-09-24 13:59:59.117] ubi0:textures is mounted. [2025-09-24 13:59:59.117] ubi1:animations is mounted. [2025-09-24 13:59:59.117] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 13:59:59.117] ubi2:dml_code is mounted. [2025-09-24 13:59:59.117] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 13:59:59.117] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 13:59:59.117] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 13:59:59.117] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 13:59:59.117] data.LB_FadeInType0=100 [2025-09-24 13:59:59.117] data.CHLH_FadeInType0=0 [2025-09-24 13:59:59.117] data.WU_FadeInDelay=0 [2025-09-24 13:59:59.117] max_time_out=0 [2025-09-24 13:59:59.117] No splash screen [2025-09-24 13:59:59.117] stop dss Done [2025-09-24 13:59:59.165] /dev/mem opened. [2025-09-24 13:59:59.165] Memory mapped at address 0xffffb0694000. [2025-09-24 13:59:59.191] Read at address 0x00600018 (0xffffb0694018): 0x00000000 [2025-09-24 13:59:59.191] Write at address 0x00600018 (0xffffb0694018): 0x00400040, readback 0x00400040 [2025-09-24 13:59:59.191] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 13:59:59.207] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 13:59:59.383] Loaded PowerVR consumer services. [2025-09-24 13:59:59.415] Waiting data available... [2025-09-24 13:59:59.415] 512+0 records in [2025-09-24 13:59:59.431] 512+0 records out [2025-09-24 13:59:59.447] Starting syslogd/klogd: done [2025-09-24 13:59:59.463] DML Start [2025-09-24 13:59:59.623] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 13:59:59.863] DML res1: 0 [2025-09-24 14:00:00.319] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:00:00.319] Read Success [2025-09-24 14:00:00.319] Verifying certificate... [2025-09-24 14:00:00.606] Verified OK [2025-09-24 14:00:00.622] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:00:02.268] Verified OK [2025-09-24 14:00:02.268] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:00:02.953] Verified OK [2025-09-24 14:00:02.953] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:00:05.592] fs.protected_hardlinks = 1 [2025-09-24 14:00:05.622] fs.protected_symlinks = 1 [2025-09-24 14:00:05.622] kernel.modules_disabled = 1 [2025-09-24 14:00:05.798] [2025-09-24 14:00:05.798] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:00:06.956] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:00:14.724] SBL1:1210.0.1.0 [2025-09-24 14:00:14.772] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:00:16.339] SBL2:1210.0.1.0 [2025-09-24 14:00:16.371] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:00:16.482] j-A [2025-09-24 14:00:23.854] The R5 Autosar Classic is running [2025-09-24 14:00:23.854] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:00:23.854] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:00:24.461] INIT: version 2.96 booting [2025-09-24 14:00:24.573] INIT: Entering runlevel: 5 [2025-09-24 14:00:24.733] mtd32 attached [2025-09-24 14:00:24.733] mtd28 attached [2025-09-24 14:00:24.749] mtd24 attached [2025-09-24 14:00:24.781] ubi0:dml_code is mounted. [2025-09-24 14:00:24.797] RTNETLINK answers: File exists [2025-09-24 14:00:24.859] ubi1:animations is mounted. [2025-09-24 14:00:24.859] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:00:24.859] ubi2:textures is mounted. [2025-09-24 14:00:24.859] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:00:24.859] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:00:24.859] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:00:24.859] data.LB_FadeInType0=100 [2025-09-24 14:00:24.859] data.CHLH_FadeInType0=0 [2025-09-24 14:00:24.859] data.WU_FadeInDelay=0 [2025-09-24 14:00:24.859] max_time_out=0 [2025-09-24 14:00:24.859] No splash screen [2025-09-24 14:00:24.859] stop dss Done [2025-09-24 14:00:24.859] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:00:24.933] /dev/mem opened. [2025-09-24 14:00:24.933] Memory mapped at address 0xffff9c7ae000. [2025-09-24 14:00:24.933] Read at address 0x00600018 (0xffff9c7ae018): 0x00000000 [2025-09-24 14:00:24.933] Write at address 0x00600018 (0xffff9c7ae018): 0x00400040, readback 0x00400040 [2025-09-24 14:00:24.963] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:00:24.963] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:00:25.027] Loaded PowerVR consumer services. [2025-09-24 14:00:25.155] 512+0 records in [2025-09-24 14:00:25.155] 512+0 records out [2025-09-24 14:00:25.171] Waiting data available... [2025-09-24 14:00:25.187] Starting syslogd/klogd: done [2025-09-24 14:00:25.203] DML Start [2025-09-24 14:00:25.378] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:00:25.602] DML res1: 0 [2025-09-24 14:00:26.074] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:00:26.074] Read Success [2025-09-24 14:00:26.074] Verifying certificate... [2025-09-24 14:00:26.297] Verified OK [2025-09-24 14:00:26.330] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:00:28.039] Verified OK [2025-09-24 14:00:28.039] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:00:28.583] Verified OK [2025-09-24 14:00:28.583] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:00:31.125] fs.protected_hardlinks = 1 [2025-09-24 14:00:31.152] fs.protected_symlinks = 1 [2025-09-24 14:00:31.152] kernel.modules_disabled = 1 [2025-09-24 14:00:31.328] [2025-09-24 14:00:31.328] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:00:32.726] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:00:40.431] SBL1:1210.0.1.0 [2025-09-24 14:00:40.479] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:00:42.046] SBL2:1210.0.1.0 [2025-09-24 14:00:42.094] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:00:42.190] j-A [2025-09-24 14:00:49.544] The R5 Autosar Classic is running [2025-09-24 14:00:49.568] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:00:49.568] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:00:50.176] INIT: version 2.96 booting [2025-09-24 14:00:50.287] INIT: Entering runlevel: 5 [2025-09-24 14:00:50.431] mtd24 attached [2025-09-24 14:00:50.447] mtd28 attached [2025-09-24 14:00:50.463] mtd32 attached [2025-09-24 14:00:50.568] ubi1:animations is mounted. [2025-09-24 14:00:50.568] ubi0:textures is mounted. [2025-09-24 14:00:50.568] RTNETLINK answers: File exists [2025-09-24 14:00:50.568] ubi2:dml_code is mounted. [2025-09-24 14:00:50.568] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:00:50.568] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:00:50.568] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:00:50.568] data.LB_FadeInType0=100 [2025-09-24 14:00:50.568] data.CHLH_FadeInType0=0 [2025-09-24 14:00:50.568] data.WU_FadeInDelay=0 [2025-09-24 14:00:50.568] max_time_out=0 [2025-09-24 14:00:50.568] No splash screen [2025-09-24 14:00:50.568] stop dss Done [2025-09-24 14:00:50.568] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:00:50.568] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:00:50.600] /dev/mem opened. [2025-09-24 14:00:50.632] Memory mapped at address 0xffffb4cb0000. [2025-09-24 14:00:50.632] Read at address 0x00600018 (0xffffb4cb0018): 0x00000000 [2025-09-24 14:00:50.632] Write at address 0x00600018 (0xffffb4cb0018): 0x00400040, readback 0x00400040 [2025-09-24 14:00:50.648] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:00:50.664] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:00:50.824] Loaded PowerVR consumer services. [2025-09-24 14:00:50.856] 512+0 records in [2025-09-24 14:00:50.872] 512+0 records out [2025-09-24 14:00:50.888] Starting syslogd/klogd: Waiting data available... [2025-09-24 14:00:50.904] done [2025-09-24 14:00:50.920] DML Start [2025-09-24 14:00:51.127] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:00:51.383] DML res1: 0 [2025-09-24 14:00:51.751] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:00:51.772] Read Success [2025-09-24 14:00:51.772] Verifying certificate... [2025-09-24 14:00:52.027] Verified OK [2025-09-24 14:00:52.043] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:00:53.754] Verified OK [2025-09-24 14:00:53.754] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:00:54.341] Verified OK [2025-09-24 14:00:54.341] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:00:56.852] fs.protected_hardlinks = 1 [2025-09-24 14:00:56.868] fs.protected_symlinks = 1 [2025-09-24 14:00:56.868] kernel.modules_disabled = 1 [2025-09-24 14:00:57.059] [2025-09-24 14:00:57.059] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:00:58.415] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:01:06.184] SBL1:1210.0.1.0 [2025-09-24 14:01:06.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:01:07.798] SBL2:1210.0.1.0 [2025-09-24 14:01:07.830] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:01:07.942] j-A [2025-09-24 14:01:15.281] The R5 Autosar Classic is running [2025-09-24 14:01:15.312] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:01:15.312] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:01:15.919] INIT: version 2.96 booting [2025-09-24 14:01:16.031] INIT: Entering runlevel: 5 [2025-09-24 14:01:16.190] mtd28 attached [2025-09-24 14:01:16.206] mtd32 attached [2025-09-24 14:01:16.206] mtd24 attached [2025-09-24 14:01:16.254] RTNETLINK answers: File exists [2025-09-24 14:01:16.324] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:01:16.324] ubi0:animations is mounted. [2025-09-24 14:01:16.324] ubi1:dml_code is mounted. [2025-09-24 14:01:16.324] ubi2:textures is mounted. [2025-09-24 14:01:16.324] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:01:16.324] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:01:16.324] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:01:16.324] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:01:16.324] data.LB_FadeInType0=100 [2025-09-24 14:01:16.324] data.CHLH_FadeInType0=0 [2025-09-24 14:01:16.324] data.WU_FadeInDelay=0 [2025-09-24 14:01:16.324] max_time_out=0 [2025-09-24 14:01:16.324] No splash screen [2025-09-24 14:01:16.324] stop dss Done [2025-09-24 14:01:16.407] /dev/mem opened. [2025-09-24 14:01:16.407] Memory mapped at address 0xffffbf44f000. [2025-09-24 14:01:16.407] Read at address 0x00600018 (0xffffbf44f018): 0x00000000 [2025-09-24 14:01:16.407] Write at address 0x00600018 (0xffffbf44f018): 0x00400040, readback 0x00400040 [2025-09-24 14:01:16.407] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:01:16.407] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:01:16.567] Loaded PowerVR consumer services. [2025-09-24 14:01:16.598] 512+0 records in [2025-09-24 14:01:16.614] 512+0 records out [2025-09-24 14:01:16.630] Waiting data available... [2025-09-24 14:01:16.662] Starting syslogd/klogd: done [2025-09-24 14:01:16.678] DML Start [2025-09-24 14:01:16.854] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:01:17.078] DML res1: 0 [2025-09-24 14:01:17.563] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:01:17.563] Read Success [2025-09-24 14:01:17.563] Verifying certificate... [2025-09-24 14:01:17.802] Verified OK [2025-09-24 14:01:17.802] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:01:19.465] Verified OK [2025-09-24 14:01:19.486] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:01:20.103] Verified OK [2025-09-24 14:01:20.103] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:01:22.757] fs.protected_hardlinks = 1 [2025-09-24 14:01:22.773] fs.protected_symlinks = 1 [2025-09-24 14:01:22.773] kernel.modules_disabled = 1 [2025-09-24 14:01:22.965] [2025-09-24 14:01:22.965] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:01:24.180] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:01:31.920] SBL1:1210.0.1.0 [2025-09-24 14:01:31.952] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:01:33.534] SBL2:1210.0.1.0 [2025-09-24 14:01:33.566] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:01:33.662] j-A [2025-09-24 14:01:41.016] The R5 Autosar Classic is running [2025-09-24 14:01:41.040] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:01:41.040] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:01:41.647] INIT: version 2.96 booting [2025-09-24 14:01:41.759] INIT: Entering runlevel: 5 [2025-09-24 14:01:41.920] mtd24 attached [2025-09-24 14:01:41.936] mtd28 attached [2025-09-24 14:01:41.952] mtd32 attached [2025-09-24 14:01:41.968] ubi0:textures is mounted. [2025-09-24 14:01:41.983] RTNETLINK answers: File exists [2025-09-24 14:01:42.046] ubi1:animations is mounted. [2025-09-24 14:01:42.046] ubi2:dml_code is mounted. [2025-09-24 14:01:42.046] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:01:42.046] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:01:42.046] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:01:42.046] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:01:42.046] data.LB_FadeInType0=100 [2025-09-24 14:01:42.046] data.CHLH_FadeInType0=0 [2025-09-24 14:01:42.046] data.WU_FadeInDelay=0 [2025-09-24 14:01:42.046] max_time_out=0 [2025-09-24 14:01:42.046] No splash screen [2025-09-24 14:01:42.046] stop dss Done [2025-09-24 14:01:42.046] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:01:42.145] /dev/mem opened. [2025-09-24 14:01:42.145] Memory mapped at address 0xffff870e1000. [2025-09-24 14:01:42.145] Read at address 0x00600018 (0xffff870e1018): 0x00000000 [2025-09-24 14:01:42.145] Write at address 0x00600018 (0xffff870e1018): 0x00400040, readback 0x00400040 [2025-09-24 14:01:42.145] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:01:42.145] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:01:42.241] Loaded PowerVR consumer services. [2025-09-24 14:01:42.337] 512+0 records in [2025-09-24 14:01:42.337] 512+0 records out [2025-09-24 14:01:42.385] Waiting data available... [2025-09-24 14:01:42.401] Starting syslogd/klogd: done [2025-09-24 14:01:42.417] DML Start [2025-09-24 14:01:42.592] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:01:42.849] DML res1: 0 [2025-09-24 14:01:43.280] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:01:43.301] Read Success [2025-09-24 14:01:43.301] Verifying certificate... [2025-09-24 14:01:43.525] Verified OK [2025-09-24 14:01:43.541] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:01:45.155] Verified OK [2025-09-24 14:01:45.155] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:01:45.826] Verified OK [2025-09-24 14:01:45.826] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:01:48.448] fs.protected_hardlinks = 1 [2025-09-24 14:01:48.448] fs.protected_symlinks = 1 [2025-09-24 14:01:48.463] kernel.modules_disabled = 1 [2025-09-24 14:01:48.640] [2025-09-24 14:01:48.640] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:01:49.897] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:01:57.639] SBL1:1210.0.1.0 [2025-09-24 14:01:57.671] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:01:59.254] SBL2:1210.0.1.0 [2025-09-24 14:01:59.286] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:01:59.382] j-A [2025-09-24 14:02:06.736] The R5 Autosar Classic is running [2025-09-24 14:02:06.761] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:02:06.761] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:02:07.368] INIT: version 2.96 booting [2025-09-24 14:02:07.481] INIT: Entering runlevel: 5 [2025-09-24 14:02:07.640] mtd32 attached [2025-09-24 14:02:07.640] mtd24 attached [2025-09-24 14:02:07.656] mtd28 attached [2025-09-24 14:02:07.753] RTNETLINK answers: File exists [2025-09-24 14:02:07.753] ubi0:dml_code is mounted. [2025-09-24 14:02:07.753] ubi1:textures is mounted. [2025-09-24 14:02:07.753] ubi2:animations is mounted. [2025-09-24 14:02:07.753] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:02:07.753] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:02:07.753] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:02:07.753] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:02:07.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:02:07.753] data.LB_FadeInType0=100 [2025-09-24 14:02:07.753] data.CHLH_FadeInType0=0 [2025-09-24 14:02:07.753] data.WU_FadeInDelay=0 [2025-09-24 14:02:07.753] max_time_out=0 [2025-09-24 14:02:07.753] No splash screen [2025-09-24 14:02:07.753] stop dss Done [2025-09-24 14:02:07.831] /dev/mem opened. [2025-09-24 14:02:07.831] Memory mapped at address 0xffffb06ce000. [2025-09-24 14:02:07.831] Read at address 0x00600018 (0xffffb06ce018): 0x00000000 [2025-09-24 14:02:07.831] Write at address 0x00600018 (0xffffb06ce018): 0x00400040, readback 0x00400040 [2025-09-24 14:02:07.831] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:02:07.831] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:02:08.039] Loaded PowerVR consumer services. [2025-09-24 14:02:08.071] 512+0 records in [2025-09-24 14:02:08.071] 512+0 records out [2025-09-24 14:02:08.103] Starting syslogd/klogd: Waiting data available... [2025-09-24 14:02:08.119] done [2025-09-24 14:02:08.119] DML Start [2025-09-24 14:02:08.311] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:02:08.550] DML res1: 0 [2025-09-24 14:02:08.966] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:02:08.982] Read Success [2025-09-24 14:02:08.982] Verifying certificate... [2025-09-24 14:02:09.222] Verified OK [2025-09-24 14:02:09.238] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:02:10.932] Verified OK [2025-09-24 14:02:10.932] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:02:11.610] Verified OK [2025-09-24 14:02:11.610] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:02:14.153] fs.protected_hardlinks = 1 [2025-09-24 14:02:14.168] fs.protected_symlinks = 1 [2025-09-24 14:02:14.168] kernel.modules_disabled = 1 [2025-09-24 14:02:14.360] [2025-09-24 14:02:14.360] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:02:15.631] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:02:23.372] SBL1:1210.0.1.0 [2025-09-24 14:02:23.420] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:02:24.987] SBL2:1210.0.1.0 [2025-09-24 14:02:25.018] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:02:25.130] j-A [2025-09-24 14:02:32.506] The R5 Autosar Classic is running [2025-09-24 14:02:32.506] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:02:32.506] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:02:33.113] INIT: version 2.96 booting [2025-09-24 14:02:33.225] INIT: Entering runlevel: 5 [2025-09-24 14:02:33.385] mtd32 attached [2025-09-24 14:02:33.385] mtd24 attached [2025-09-24 14:02:33.401] mtd28 attached [2025-09-24 14:02:33.449] ubi0:dml_code is mounted. [2025-09-24 14:02:33.449] RTNETLINK answers: File exists [2025-09-24 14:02:33.513] ubi1:textures is mounted. [2025-09-24 14:02:33.513] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:02:33.513] ubi2:animations is mounted. [2025-09-24 14:02:33.513] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:02:33.513] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:02:33.513] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:02:33.513] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:02:33.513] data.LB_FadeInType0=100 [2025-09-24 14:02:33.513] data.CHLH_FadeInType0=0 [2025-09-24 14:02:33.513] data.WU_FadeInDelay=0 [2025-09-24 14:02:33.513] max_time_out=0 [2025-09-24 14:02:33.513] No splash screen [2025-09-24 14:02:33.513] stop dss Done [2025-09-24 14:02:33.560] /dev/mem opened. [2025-09-24 14:02:33.598] Memory mapped at address 0xffffb6d6d000. [2025-09-24 14:02:33.598] Read at address 0x00600018 (0xffffb6d6d018): 0x00000000 [2025-09-24 14:02:33.598] Write at address 0x00600018 (0xffffb6d6d018): 0x00400040, readback 0x00400040 [2025-09-24 14:02:33.598] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:02:33.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:02:33.678] Loaded PowerVR consumer services. [2025-09-24 14:02:33.805] 512+0 records in [2025-09-24 14:02:33.805] 512+0 records out [2025-09-24 14:02:33.837] Starting syslogd/klogd: Waiting data available... [2025-09-24 14:02:33.853] done [2025-09-24 14:02:33.853] DML Start [2025-09-24 14:02:34.046] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:02:34.269] DML res1: 0 [2025-09-24 14:02:34.668] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:02:34.684] Read Success [2025-09-24 14:02:34.684] Verifying certificate... [2025-09-24 14:02:34.988] Verified OK [2025-09-24 14:02:35.020] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:02:36.603] Verified OK [2025-09-24 14:02:36.603] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:02:37.163] Verified OK [2025-09-24 14:02:37.163] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:02:39.976] fs.protected_hardlinks = 1 [2025-09-24 14:02:39.992] fs.protected_symlinks = 1 [2025-09-24 14:02:39.992] kernel.modules_disabled = 1 [2025-09-24 14:02:40.200] [2025-09-24 14:02:40.200] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:02:41.347] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:02:49.082] SBL1:1210.0.1.0 [2025-09-24 14:02:49.130] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:02:50.697] SBL2:1210.0.1.0 [2025-09-24 14:02:50.745] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:02:50.840] j-A [2025-09-24 14:02:58.195] The R5 Autosar Classic is running [2025-09-24 14:02:58.216] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:02:58.216] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:02:58.824] INIT: version 2.96 booting [2025-09-24 14:02:58.936] INIT: Entering runlevel: 5 [2025-09-24 14:02:59.095] mtd24 attached [2025-09-24 14:02:59.111] mtd28 attached [2025-09-24 14:02:59.111] mtd32 attached [2025-09-24 14:02:59.159] ubi0:textures is mounted. [2025-09-24 14:02:59.226] ubi1:animations is mounted. [2025-09-24 14:02:59.226] RTNETLINK answers: File exists [2025-09-24 14:02:59.226] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:02:59.226] ubi2:dml_code is mounted. [2025-09-24 14:02:59.226] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:02:59.226] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:02:59.226] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:02:59.226] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:02:59.226] data.LB_FadeInType0=100 [2025-09-24 14:02:59.226] data.CHLH_FadeInType0=0 [2025-09-24 14:02:59.226] data.WU_FadeInDelay=0 [2025-09-24 14:02:59.226] max_time_out=0 [2025-09-24 14:02:59.226] No splash screen [2025-09-24 14:02:59.226] stop dss Done [2025-09-24 14:02:59.271] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:02:59.271] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:02:59.305] /dev/mem opened. [2025-09-24 14:02:59.305] Memory mapped at address 0xffff9b779000. [2025-09-24 14:02:59.305] Read at address 0x00600018 (0xffff9b779018): 0x00000000 [2025-09-24 14:02:59.305] Write at address 0x00600018 (0xffff9b779018): 0x00400040, readback 0x00400040 [2025-09-24 14:02:59.401] Loaded PowerVR consumer services. [2025-09-24 14:02:59.513] 512+0 records in [2025-09-24 14:02:59.529] 512+0 records out [2025-09-24 14:02:59.529] Waiting data available... [2025-09-24 14:02:59.561] Starting syslogd/klogd: done [2025-09-24 14:02:59.577] DML Start [2025-09-24 14:02:59.785] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:03:00.025] DML res1: 0 [2025-09-24 14:03:00.381] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:03:00.381] Read Success [2025-09-24 14:03:00.381] Verifying certificate... [2025-09-24 14:03:00.621] Verified OK [2025-09-24 14:03:00.637] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:03:02.177] Verified OK [2025-09-24 14:03:02.177] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:03:02.828] Verified OK [2025-09-24 14:03:02.828] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:03:05.610] fs.protected_hardlinks = 1 [2025-09-24 14:03:05.639] fs.protected_symlinks = 1 [2025-09-24 14:03:05.639] kernel.modules_disabled = 1 [2025-09-24 14:03:05.831] [2025-09-24 14:03:05.831] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:03:07.122] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:03:14.820] SBL1:1210.0.1.0 [2025-09-24 14:03:14.852] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:03:16.435] SBL2:1210.0.1.0 [2025-09-24 14:03:16.467] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:03:16.579] j-A [2025-09-24 14:03:23.949] The R5 Autosar Classic is running [2025-09-24 14:03:23.949] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:03:23.949] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:03:24.556] INIT: version 2.96 booting [2025-09-24 14:03:24.668] INIT: Entering runlevel: 5 [2025-09-24 14:03:24.812] mtd24 attached [2025-09-24 14:03:24.828] mtd32 attached [2025-09-24 14:03:24.844] mtd28 attached [2025-09-24 14:03:24.892] RTNETLINK answers: File exists [2025-09-24 14:03:24.892] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:03:24.920] ubi1:dml_code is mounted. [2025-09-24 14:03:24.920] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:03:24.920] ubi0:textures is mounted. [2025-09-24 14:03:24.920] ubi2:animations is mounted. [2025-09-24 14:03:24.920] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:03:24.954] data.LB_FadeInType0=100 [2025-09-24 14:03:24.954] data.CHLH_FadeInType0=0 [2025-09-24 14:03:24.954] data.WU_FadeInDelay=0 [2025-09-24 14:03:24.954] max_time_out=0 [2025-09-24 14:03:24.954] No splash screen [2025-09-24 14:03:24.954] stop dss Done [2025-09-24 14:03:24.954] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:03:24.954] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:03:25.001] /dev/mem opened. [2025-09-24 14:03:25.040] Memory mapped at address 0xffffa09e1000. [2025-09-24 14:03:25.040] Read at address 0x00600018 (0xffffa09e1018): 0x00000000 [2025-09-24 14:03:25.040] Write at address 0x00600018 (0xffffa09e1018): 0x00400040, readback 0x00400040 [2025-09-24 14:03:25.040] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:03:25.040] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:03:25.152] Loaded PowerVR consumer services. [2025-09-24 14:03:25.231] 512+0 records in [2025-09-24 14:03:25.231] 512+0 records out [2025-09-24 14:03:25.280] Waiting data available... [2025-09-24 14:03:25.296] Starting syslogd/klogd: done [2025-09-24 14:03:25.312] DML Start [2025-09-24 14:03:25.456] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:03:25.679] DML res1: 0 [2025-09-24 14:03:26.168] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:03:26.168] Read Success [2025-09-24 14:03:26.168] Verifying certificate... [2025-09-24 14:03:26.423] Verified OK [2025-09-24 14:03:26.439] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:03:28.179] Verified OK [2025-09-24 14:03:28.180] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:03:28.816] Verified OK [2025-09-24 14:03:28.816] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:03:31.423] fs.protected_hardlinks = 1 [2025-09-24 14:03:31.423] fs.protected_symlinks = 1 [2025-09-24 14:03:31.438] kernel.modules_disabled = 1 [2025-09-24 14:03:31.614] [2025-09-24 14:03:31.614] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:03:32.801] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:03:40.552] SBL1:1210.0.1.0 [2025-09-24 14:03:40.600] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:03:42.166] SBL2:1210.0.1.0 [2025-09-24 14:03:42.214] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:03:42.310] j-A [2025-09-24 14:03:49.664] The R5 Autosar Classic is running [2025-09-24 14:03:49.685] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:03:49.685] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:03:50.293] INIT: version 2.96 booting [2025-09-24 14:03:50.405] INIT: Entering runlevel: 5 [2025-09-24 14:03:50.565] mtd24 attached [2025-09-24 14:03:50.565] mtd32 attached [2025-09-24 14:03:50.580] mtd28 attached [2025-09-24 14:03:50.628] RTNETLINK answers: File exists [2025-09-24 14:03:50.692] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:03:50.692] ubi0:textures is mounted. [2025-09-24 14:03:50.692] ubi1:dml_code is mounted. [2025-09-24 14:03:50.692] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:03:50.692] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:03:50.692] ubi2:animations is mounted. [2025-09-24 14:03:50.692] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:03:50.692] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:03:50.692] data.LB_FadeInType0=100 [2025-09-24 14:03:50.692] data.CHLH_FadeInType0=0 [2025-09-24 14:03:50.692] data.WU_FadeInDelay=0 [2025-09-24 14:03:50.692] max_time_out=0 [2025-09-24 14:03:50.692] No splash screen [2025-09-24 14:03:50.692] stop dss Done [2025-09-24 14:03:50.740] /dev/mem opened. [2025-09-24 14:03:50.740] Memory mapped at address 0xffffaa411000. [2025-09-24 14:03:50.772] Read at address 0x00600018 (0xffffaa411018): 0x00000000 [2025-09-24 14:03:50.772] Write at address 0x00600018 (0xffffaa411018): 0x00400040, readback 0x00400040 [2025-09-24 14:03:50.772] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:03:50.772] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:03:50.851] Loaded PowerVR consumer services. [2025-09-24 14:03:50.979] 512+0 records in [2025-09-24 14:03:50.979] 512+0 records out [2025-09-24 14:03:51.012] Waiting data available... [2025-09-24 14:03:51.028] Starting syslogd/klogd: done [2025-09-24 14:03:51.060] DML Start [2025-09-24 14:03:51.251] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:03:51.475] DML res1: 0 [2025-09-24 14:03:51.858] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:03:51.879] Read Success [2025-09-24 14:03:51.879] Verifying certificate... [2025-09-24 14:03:52.103] Verified OK [2025-09-24 14:03:52.119] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:03:53.708] Verified OK [2025-09-24 14:03:53.708] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:03:54.347] Verified OK [2025-09-24 14:03:54.347] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:03:56.904] fs.protected_hardlinks = 1 [2025-09-24 14:03:56.920] fs.protected_symlinks = 1 [2025-09-24 14:03:56.920] kernel.modules_disabled = 1 [2025-09-24 14:03:57.128] [2025-09-24 14:03:57.128] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:03:58.579] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:04:06.297] SBL1:1210.0.1.0 [2025-09-24 14:04:06.328] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:04:07.912] SBL2:1210.0.1.0 [2025-09-24 14:04:07.943] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:04:08.055] j-A [2025-09-24 14:04:15.394] The R5 Autosar Classic is running [2025-09-24 14:04:15.425] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:04:15.425] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:04:16.032] INIT: version 2.96 booting [2025-09-24 14:04:16.128] INIT: Entering runlevel: 5 [2025-09-24 14:04:16.287] mtd28 attached [2025-09-24 14:04:16.303] mtd32 attached [2025-09-24 14:04:16.303] mtd24 attached [2025-09-24 14:04:16.351] ubi0:animations is mounted. [2025-09-24 14:04:16.367] RTNETLINK answers: File exists [2025-09-24 14:04:16.420] ubi2:textures is mounted. [2025-09-24 14:04:16.420] ubi1:dml_code is mounted. [2025-09-24 14:04:16.420] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:04:16.420] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:04:16.420] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:04:16.420] data.LB_FadeInType0=100 [2025-09-24 14:04:16.420] data.CHLH_FadeInType0=0 [2025-09-24 14:04:16.420] data.WU_FadeInDelay=0 [2025-09-24 14:04:16.420] max_time_out=0 [2025-09-24 14:04:16.420] No splash screen [2025-09-24 14:04:16.420] stop dss Done [2025-09-24 14:04:16.420] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:04:16.420] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:04:16.494] /dev/mem opened. [2025-09-24 14:04:16.494] Memory mapped at address 0xffff93b17000. [2025-09-24 14:04:16.494] Read at address 0x00600018 (0xffff93b17018): 0x00000000 [2025-09-24 14:04:16.494] Write at address 0x00600018 (0xffff93b17018): 0x00400040, readback 0x00400040 [2025-09-24 14:04:16.510] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:04:16.541] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:04:16.700] Loaded PowerVR consumer services. [2025-09-24 14:04:16.748] 512+0 records in [2025-09-24 14:04:16.748] 512+0 records out [2025-09-24 14:04:16.764] Waiting data available... [2025-09-24 14:04:16.796] Starting syslogd/klogd: done [2025-09-24 14:04:16.812] DML Start [2025-09-24 14:04:16.972] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:04:17.212] DML res1: 0 [2025-09-24 14:04:17.659] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:04:17.659] Read Success [2025-09-24 14:04:17.659] Verifying certificate... [2025-09-24 14:04:17.899] Verified OK [2025-09-24 14:04:17.915] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:04:19.461] Verified OK [2025-09-24 14:04:19.461] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:04:20.069] Verified OK [2025-09-24 14:04:20.085] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:04:22.883] fs.protected_hardlinks = 1 [2025-09-24 14:04:22.899] fs.protected_symlinks = 1 [2025-09-24 14:04:22.899] kernel.modules_disabled = 1 [2025-09-24 14:04:23.107] [2025-09-24 14:04:23.107] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:04:24.314] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:04:32.052] SBL1:1210.0.1.0 [2025-09-24 14:04:32.083] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:04:33.666] SBL2:1210.0.1.0 [2025-09-24 14:04:33.697] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:04:33.810] j-A [2025-09-24 14:04:41.181] The R5 Autosar Classic is running [2025-09-24 14:04:41.181] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:04:41.181] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:04:41.789] INIT: version 2.96 booting [2025-09-24 14:04:41.901] INIT: Entering runlevel: 5 [2025-09-24 14:04:42.045] mtd28 attached [2025-09-24 14:04:42.060] mtd32 attached [2025-09-24 14:04:42.076] mtd24 attached [2025-09-24 14:04:42.160] ubi0:animations is mounted. [2025-09-24 14:04:42.160] RTNETLINK answers: File exists [2025-09-24 14:04:42.160] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:04:42.160] ubi1:dml_code is mounted. [2025-09-24 14:04:42.160] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:04:42.160] ubi2:textures is mounted. [2025-09-24 14:04:42.160] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:04:42.160] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:04:42.160] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:04:42.188] data.LB_FadeInType0=100 [2025-09-24 14:04:42.188] data.CHLH_FadeInType0=0 [2025-09-24 14:04:42.188] data.WU_FadeInDelay=0 [2025-09-24 14:04:42.188] max_time_out=0 [2025-09-24 14:04:42.188] No splash screen [2025-09-24 14:04:42.188] stop dss Done [2025-09-24 14:04:42.204] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:04:42.220] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:04:42.236] /dev/mem opened. [2025-09-24 14:04:42.236] Memory mapped at address 0xffffbf590000. [2025-09-24 14:04:42.262] Read at address 0x00600018 (0xffffbf590018): 0x00000000 [2025-09-24 14:04:42.262] Write at address 0x00600018 (0xffffbf590018): 0x00400040, readback 0x00400040 [2025-09-24 14:04:42.455] Loaded PowerVR consumer services. [2025-09-24 14:04:42.487] 512+0 records in [2025-09-24 14:04:42.487] 512+0 records out [2025-09-24 14:04:42.503] Waiting data available... [2025-09-24 14:04:42.535] Starting syslogd/klogd: done [2025-09-24 14:04:42.551] DML Start [2025-09-24 14:04:42.742] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:04:42.950] DML res1: 0 [2025-09-24 14:04:43.429] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:04:43.445] Read Success [2025-09-24 14:04:43.445] Verifying certificate... [2025-09-24 14:04:43.717] Verified OK [2025-09-24 14:04:43.733] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:04:45.459] Verified OK [2025-09-24 14:04:45.459] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:04:46.003] Verified OK [2025-09-24 14:04:46.019] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:04:48.577] fs.protected_hardlinks = 1 [2025-09-24 14:04:48.593] fs.protected_symlinks = 1 [2025-09-24 14:04:48.593] kernel.modules_disabled = 1 [2025-09-24 14:04:48.785] [2025-09-24 14:04:48.785] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:04:50.053] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:04:57.747] SBL1:1210.0.1.0 [2025-09-24 14:04:57.795] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:04:59.361] SBL2:1210.0.1.0 [2025-09-24 14:04:59.409] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:04:59.505] j-A [2025-09-24 14:05:06.860] The R5 Autosar Classic is running [2025-09-24 14:05:06.882] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:05:06.882] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:05:07.489] INIT: version 2.96 booting [2025-09-24 14:05:07.600] INIT: Entering runlevel: 5 [2025-09-24 14:05:07.745] mtd28 attached [2025-09-24 14:05:07.761] mtd24 attached [2025-09-24 14:05:07.777] mtd32 attached [2025-09-24 14:05:07.793] ubi0:animations is mounted. [2025-09-24 14:05:07.879] ubi1:textures is mounted. [2025-09-24 14:05:07.879] RTNETLINK answers: File exists [2025-09-24 14:05:07.879] ubi2:dml_code is mounted. [2025-09-24 14:05:07.879] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:05:07.879] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:05:07.879] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:05:07.879] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:05:07.879] data.LB_FadeInType0=100 [2025-09-24 14:05:07.879] data.CHLH_FadeInType0=0 [2025-09-24 14:05:07.879] data.WU_FadeInDelay=0 [2025-09-24 14:05:07.879] max_time_out=0 [2025-09-24 14:05:07.879] No splash screen [2025-09-24 14:05:07.879] stop dss Done [2025-09-24 14:05:07.879] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:05:07.910] /dev/mem opened. [2025-09-24 14:05:07.947] Memory mapped at address 0xffff97299000. [2025-09-24 14:05:07.947] Read at address 0x00600018 (0xffff97299018): 0x00000000 [2025-09-24 14:05:07.947] Write at address 0x00600018 (0xffff97299018): 0x00400040, readback 0x00400040 [2025-09-24 14:05:07.947] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:05:07.947] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:05:08.108] Loaded PowerVR consumer services. [2025-09-24 14:05:08.171] Waiting data available... [2025-09-24 14:05:08.187] 512+0 records in [2025-09-24 14:05:08.187] 512+0 records out [2025-09-24 14:05:08.219] Starting syslogd/klogd: done [2025-09-24 14:05:08.251] DML Start [2025-09-24 14:05:08.443] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:05:08.635] DML res1: 0 [2025-09-24 14:05:09.066] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:05:09.088] Read Success [2025-09-24 14:05:09.088] Verifying certificate... [2025-09-24 14:05:09.311] Verified OK [2025-09-24 14:05:09.327] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:05:11.174] Verified OK [2025-09-24 14:05:11.174] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:05:11.733] Verified OK [2025-09-24 14:05:11.733] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:05:14.292] fs.protected_hardlinks = 1 [2025-09-24 14:05:14.308] fs.protected_symlinks = 1 [2025-09-24 14:05:14.308] kernel.modules_disabled = 1 [2025-09-24 14:05:14.500] [2025-09-24 14:05:14.500] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:05:15.713] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:05:23.475] SBL1:1210.0.1.0 [2025-09-24 14:05:23.507] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:05:25.090] SBL2:1210.0.1.0 [2025-09-24 14:05:25.121] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:05:25.233] j-A [2025-09-24 14:05:32.605] The R5 Autosar Classic is running [2025-09-24 14:05:32.605] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:05:32.605] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:05:33.212] INIT: version 2.96 booting [2025-09-24 14:05:33.324] INIT: Entering runlevel: 5 [2025-09-24 14:05:33.484] mtd24 attached [2025-09-24 14:05:33.484] mtd28 attached [2025-09-24 14:05:33.500] mtd32 attached [2025-09-24 14:05:33.548] ubi1:animations is mounted. [2025-09-24 14:05:33.548] RTNETLINK answers: File exists [2025-09-24 14:05:33.615] ubi0:textures is mounted. [2025-09-24 14:05:33.615] ubi2:dml_code is mounted. [2025-09-24 14:05:33.615] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:05:33.615] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:05:33.615] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:05:33.615] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:05:33.615] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:05:33.615] data.LB_FadeInType0=100 [2025-09-24 14:05:33.615] data.CHLH_FadeInType0=0 [2025-09-24 14:05:33.615] data.WU_FadeInDelay=0 [2025-09-24 14:05:33.615] max_time_out=0 [2025-09-24 14:05:33.615] No splash screen [2025-09-24 14:05:33.615] stop dss Done [2025-09-24 14:05:33.630] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:05:33.646] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:05:33.687] /dev/mem opened. [2025-09-24 14:05:33.687] Memory mapped at address 0xffff905c6000. [2025-09-24 14:05:33.687] Read at address 0x00600018 (0xffff905c6018): 0x00000000 [2025-09-24 14:05:33.687] Write at address 0x00600018 (0xffff905c6018): 0x00400040, readback 0x00400040 [2025-09-24 14:05:33.879] Loaded PowerVR consumer services. [2025-09-24 14:05:33.911] 512+0 records in [2025-09-24 14:05:33.911] 512+0 records out [2025-09-24 14:05:33.943] Starting syslogd/klogd: Waiting data available... [2025-09-24 14:05:33.959] done [2025-09-24 14:05:33.975] DML Start [2025-09-24 14:05:34.118] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:05:34.390] DML res1: 0 [2025-09-24 14:05:34.822] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:05:34.845] Read Success [2025-09-24 14:05:34.845] Verifying certificate... [2025-09-24 14:05:35.100] Verified OK [2025-09-24 14:05:35.116] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:05:36.820] Verified OK [2025-09-24 14:05:36.820] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:05:37.417] Verified OK [2025-09-24 14:05:37.417] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:05:40.103] fs.protected_hardlinks = 1 [2025-09-24 14:05:40.119] fs.protected_symlinks = 1 [2025-09-24 14:05:40.119] kernel.modules_disabled = 1 [2025-09-24 14:05:40.311] [2025-09-24 14:05:40.311] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:05:41.451] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:05:49.217] SBL1:1210.0.1.0 [2025-09-24 14:05:49.265] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:05:50.832] SBL2:1210.0.1.0 [2025-09-24 14:05:50.880] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:05:50.976] j-A [2025-09-24 14:05:58.330] The R5 Autosar Classic is running [2025-09-24 14:05:58.352] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:05:58.352] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:05:58.959] INIT: version 2.96 booting [2025-09-24 14:05:59.070] INIT: Entering runlevel: 5 [2025-09-24 14:05:59.231] mtd24 attached [2025-09-24 14:05:59.231] mtd28 attached [2025-09-24 14:05:59.247] mtd32 attached [2025-09-24 14:05:59.295] RTNETLINK answers: File exists [2025-09-24 14:05:59.359] ubi0:textures is mounted. [2025-09-24 14:05:59.359] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:05:59.359] ubi1:animations is mounted. [2025-09-24 14:05:59.359] ubi2:dml_code is mounted. [2025-09-24 14:05:59.359] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:05:59.359] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:05:59.359] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:05:59.359] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:05:59.359] data.LB_FadeInType0=100 [2025-09-24 14:05:59.359] data.CHLH_FadeInType0=0 [2025-09-24 14:05:59.359] data.WU_FadeInDelay=0 [2025-09-24 14:05:59.359] max_time_out=0 [2025-09-24 14:05:59.359] No splash screen [2025-09-24 14:05:59.359] stop dss Done [2025-09-24 14:05:59.433] /dev/mem opened. [2025-09-24 14:05:59.433] Memory mapped at address 0xffff89996000. [2025-09-24 14:05:59.433] Read at address 0x00600018 (0xffff89996018): 0x00000000 [2025-09-24 14:05:59.433] Write at address 0x00600018 (0xffff89996018): 0x00400040, readback 0x00400040 [2025-09-24 14:05:59.433] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:05:59.433] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:05:59.593] Loaded PowerVR consumer services. [2025-09-24 14:05:59.690] Waiting data available... [2025-09-24 14:05:59.705] 512+0 records in [2025-09-24 14:05:59.705] 512+0 records out [2025-09-24 14:05:59.737] Starting syslogd/klogd: done [2025-09-24 14:05:59.753] DML Start [2025-09-24 14:05:59.945] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:06:00.153] DML res1: 0 [2025-09-24 14:06:00.671] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:06:00.671] Read Success [2025-09-24 14:06:00.671] Verifying certificate... [2025-09-24 14:06:00.910] Verified OK [2025-09-24 14:06:00.926] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:06:02.797] Verified OK [2025-09-24 14:06:02.797] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:06:03.309] Verified OK [2025-09-24 14:06:03.309] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:06:05.707] fs.protected_hardlinks = 1 [2025-09-24 14:06:05.707] fs.protected_symlinks = 1 [2025-09-24 14:06:05.723] kernel.modules_disabled = 1 [2025-09-24 14:06:05.899] [2025-09-24 14:06:05.899] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:06:07.240] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:06:14.934] SBL1:1210.0.1.0 [2025-09-24 14:06:14.966] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:06:16.549] SBL2:1210.0.1.0 [2025-09-24 14:06:16.581] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:06:16.693] j-A [2025-09-24 14:06:24.063] The R5 Autosar Classic is running [2025-09-24 14:06:24.063] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:06:24.063] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:06:24.671] INIT: version 2.96 booting [2025-09-24 14:06:24.783] INIT: Entering runlevel: 5 [2025-09-24 14:06:24.927] mtd24 attached [2025-09-24 14:06:24.943] mtd28 attached [2025-09-24 14:06:24.959] mtd32 attached [2025-09-24 14:06:25.007] ubi0:textures is mounted. [2025-09-24 14:06:25.007] RTNETLINK answers: File exists [2025-09-24 14:06:25.071] ubi1:animations is mounted. [2025-09-24 14:06:25.071] ubi2:dml_code is mounted. [2025-09-24 14:06:25.071] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:06:25.071] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:06:25.071] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:06:25.071] data.LB_FadeInType0=100 [2025-09-24 14:06:25.071] data.CHLH_FadeInType0=0 [2025-09-24 14:06:25.071] data.WU_FadeInDelay=0 [2025-09-24 14:06:25.071] max_time_out=0 [2025-09-24 14:06:25.071] No splash screen [2025-09-24 14:06:25.071] stop dss Done [2025-09-24 14:06:25.071] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:06:25.071] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:06:25.145] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:06:25.145] /dev/mem opened. [2025-09-24 14:06:25.145] Memory mapped at address 0xffffb20df000. [2025-09-24 14:06:25.145] Read at address 0x00600018 (0xffffb20df018): 0x00000000 [2025-09-24 14:06:25.145] Write at address 0x00600018 (0xffffb20df018): 0x00400040, readback 0x00400040 [2025-09-24 14:06:25.145] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:06:25.304] Loaded PowerVR consumer services. [2025-09-24 14:06:25.385] 512+0 records in [2025-09-24 14:06:25.385] 512+0 records out [2025-09-24 14:06:25.400] Waiting data available... [2025-09-24 14:06:25.416] Starting syslogd/klogd: done [2025-09-24 14:06:25.448] DML Start [2025-09-24 14:06:25.592] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:06:25.784] DML res1: 0 [2025-09-24 14:06:26.407] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:06:26.423] Read Success [2025-09-24 14:06:26.423] Verifying certificate... [2025-09-24 14:06:26.615] Verified OK [2025-09-24 14:06:26.631] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:06:28.326] Verified OK [2025-09-24 14:06:28.342] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:06:28.912] Verified OK [2025-09-24 14:06:28.912] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:06:31.375] fs.protected_hardlinks = 1 [2025-09-24 14:06:31.375] fs.protected_symlinks = 1 [2025-09-24 14:06:31.391] kernel.modules_disabled = 1 [2025-09-24 14:06:31.582] [2025-09-24 14:06:31.582] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:06:32.941] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:06:40.675] SBL1:1210.0.1.0 [2025-09-24 14:06:40.707] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:06:42.290] SBL2:1210.0.1.0 [2025-09-24 14:06:42.322] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:06:42.433] j-A [2025-09-24 14:06:49.771] The R5 Autosar Classic is running [2025-09-24 14:06:49.802] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:06:49.802] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:06:50.409] INIT: version 2.96 booting [2025-09-24 14:06:50.522] INIT: Entering runlevel: 5 [2025-09-24 14:06:50.681] mtd32 attached [2025-09-24 14:06:50.681] mtd24 attached [2025-09-24 14:06:50.697] mtd28 attached [2025-09-24 14:06:50.729] ubi0:dml_code is mounted. [2025-09-24 14:06:50.745] RTNETLINK answers: File exists [2025-09-24 14:06:50.745] ubi2:animations is mounted. [2025-09-24 14:06:50.802] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:06:50.802] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:06:50.802] ubi1:textures is mounted. [2025-09-24 14:06:50.802] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:06:50.802] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:06:50.802] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:06:50.802] data.LB_FadeInType0=100 [2025-09-24 14:06:50.802] data.CHLH_FadeInType0=0 [2025-09-24 14:06:50.802] data.WU_FadeInDelay=0 [2025-09-24 14:06:50.802] max_time_out=0 [2025-09-24 14:06:50.802] No splash screen [2025-09-24 14:06:50.802] stop dss Done [2025-09-24 14:06:50.850] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:06:50.891] /dev/mem opened. [2025-09-24 14:06:50.891] Memory mapped at address 0xffffabb65000. [2025-09-24 14:06:50.891] Read at address 0x00600018 (0xffffabb65018): 0x00000000 [2025-09-24 14:06:50.891] Write at address 0x00600018 (0xffffabb65018): 0x00400040, readback 0x00400040 [2025-09-24 14:06:50.891] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:06:50.971] Loaded PowerVR consumer services. [2025-09-24 14:06:51.099] Waiting data available... [2025-09-24 14:06:51.115] 512+0 records in [2025-09-24 14:06:51.115] 512+0 records out [2025-09-24 14:06:51.131] Starting syslogd/klogd: done [2025-09-24 14:06:51.147] DML Start [2025-09-24 14:06:51.339] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:06:51.546] DML res1: 0 [2025-09-24 14:06:52.004] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:06:52.004] Read Success [2025-09-24 14:06:52.004] Verifying certificate... [2025-09-24 14:06:52.260] Verified OK [2025-09-24 14:06:52.276] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:06:54.030] Verified OK [2025-09-24 14:06:54.031] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:06:54.555] Verified OK [2025-09-24 14:06:54.555] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:06:57.113] fs.protected_hardlinks = 1 [2025-09-24 14:06:57.113] fs.protected_symlinks = 1 [2025-09-24 14:06:57.129] kernel.modules_disabled = 1 [2025-09-24 14:06:57.320] [2025-09-24 14:06:57.320] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:06:58.641] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:07:06.406] SBL1:1210.0.1.0 [2025-09-24 14:07:06.439] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:07:08.020] SBL2:1210.0.1.0 [2025-09-24 14:07:08.053] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:07:08.165] j-A [2025-09-24 14:07:15.503] The R5 Autosar Classic is running [2025-09-24 14:07:15.528] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:07:15.528] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:07:16.135] INIT: version 2.96 booting [2025-09-24 14:07:16.246] INIT: Entering runlevel: 5 [2025-09-24 14:07:16.406] mtd28 attached [2025-09-24 14:07:16.422] mtd32 attached [2025-09-24 14:07:16.438] mtd24 attached [2025-09-24 14:07:16.540] ubi0:animations is mounted. [2025-09-24 14:07:16.540] ubi1:dml_code is mounted. [2025-09-24 14:07:16.540] RTNETLINK answers: File exists [2025-09-24 14:07:16.540] ubi2:textures is mounted. [2025-09-24 14:07:16.540] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:07:16.540] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:07:16.540] data.LB_FadeInType0=100 [2025-09-24 14:07:16.540] data.CHLH_FadeInType0=0 [2025-09-24 14:07:16.540] data.WU_FadeInDelay=0 [2025-09-24 14:07:16.540] max_time_out=0 [2025-09-24 14:07:16.540] No splash screen [2025-09-24 14:07:16.540] stop dss Done [2025-09-24 14:07:16.540] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:07:16.540] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:07:16.540] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:07:16.608] /dev/mem opened. [2025-09-24 14:07:16.608] Memory mapped at address 0xffffa3adc000. [2025-09-24 14:07:16.608] Read at address 0x00600018 (0xffffa3adc018): 0x00000000 [2025-09-24 14:07:16.608] Write at address 0x00600018 (0xffffa3adc018): 0x00400040, readback 0x00400040 [2025-09-24 14:07:16.656] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:07:16.672] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:07:16.800] Loaded PowerVR consumer services. [2025-09-24 14:07:16.816] 512+0 records in [2025-09-24 14:07:16.816] 512+0 records out [2025-09-24 14:07:16.848] Starting syslogd/klogd: done [2025-09-24 14:07:16.928] Waiting data available... [2025-09-24 14:07:16.928] DML Start [2025-09-24 14:07:17.120] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:07:17.328] DML res1: 0 [2025-09-24 14:07:17.705] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:07:17.705] Read Success [2025-09-24 14:07:17.705] Verifying certificate... [2025-09-24 14:07:17.976] Verified OK [2025-09-24 14:07:17.992] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:07:19.703] Verified OK [2025-09-24 14:07:19.703] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:07:20.357] Verified OK [2025-09-24 14:07:20.357] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:07:22.916] fs.protected_hardlinks = 1 [2025-09-24 14:07:22.916] fs.protected_symlinks = 1 [2025-09-24 14:07:22.932] kernel.modules_disabled = 1 [2025-09-24 14:07:23.123] [2025-09-24 14:07:23.139] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:07:24.385] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:07:32.158] SBL1:1210.0.1.0 [2025-09-24 14:07:32.206] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:07:33.774] SBL2:1210.0.1.0 [2025-09-24 14:07:33.806] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:07:33.917] j-A [2025-09-24 14:07:41.270] The R5 Autosar Classic is running [2025-09-24 14:07:41.270] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:07:41.291] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:07:41.900] INIT: version 2.96 booting [2025-09-24 14:07:42.011] INIT: Entering runlevel: 5 [2025-09-24 14:07:42.155] mtd28 attached [2025-09-24 14:07:42.171] mtd32 attached [2025-09-24 14:07:42.187] mtd24 attached [2025-09-24 14:07:42.235] ubi0:animations is mounted. [2025-09-24 14:07:42.236] RTNETLINK answers: File exists [2025-09-24 14:07:42.273] ubi1:dml_code is mounted. [2025-09-24 14:07:42.273] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:07:42.273] ubi2:textures is mounted. [2025-09-24 14:07:42.273] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:07:42.273] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:07:42.273] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:07:42.273] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:07:42.299] data.LB_FadeInType0=100 [2025-09-24 14:07:42.299] data.CHLH_FadeInType0=0 [2025-09-24 14:07:42.299] data.WU_FadeInDelay=0 [2025-09-24 14:07:42.299] max_time_out=0 [2025-09-24 14:07:42.299] No splash screen [2025-09-24 14:07:42.299] stop dss Done [2025-09-24 14:07:42.331] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:07:42.347] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:07:42.385] /dev/mem opened. [2025-09-24 14:07:42.385] Memory mapped at address 0xffff81272000. [2025-09-24 14:07:42.385] Read at address 0x00600018 (0xffff81272018): 0x00000000 [2025-09-24 14:07:42.385] Write at address 0x00600018 (0xffff81272018): 0x00400040, readback 0x00400040 [2025-09-24 14:07:42.465] Loaded PowerVR consumer services. [2025-09-24 14:07:42.593] 512+0 records in [2025-09-24 14:07:42.593] 512+0 records out [2025-09-24 14:07:42.609] Waiting data available... [2025-09-24 14:07:42.640] Starting syslogd/klogd: done [2025-09-24 14:07:42.656] DML Start [2025-09-24 14:07:42.864] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:07:43.072] DML res1: 0 [2025-09-24 14:07:43.526] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:07:43.526] Read Success [2025-09-24 14:07:43.526] Verifying certificate... [2025-09-24 14:07:43.782] Verified OK [2025-09-24 14:07:43.798] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:07:45.631] Verified OK [2025-09-24 14:07:45.631] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:07:46.110] Verified OK [2025-09-24 14:07:46.126] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:07:48.635] fs.protected_hardlinks = 1 [2025-09-24 14:07:48.651] fs.protected_symlinks = 1 [2025-09-24 14:07:48.651] kernel.modules_disabled = 1 [2025-09-24 14:07:48.859] [2025-09-24 14:07:48.859] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:07:50.167] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:07:57.908] SBL1:1210.0.1.0 [2025-09-24 14:07:57.956] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:07:59.523] SBL2:1210.0.1.0 [2025-09-24 14:07:59.571] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:07:59.667] j-A [2025-09-24 14:08:07.022] The R5 Autosar Classic is running [2025-09-24 14:08:07.045] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:08:07.045] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:08:07.652] INIT: version 2.96 booting [2025-09-24 14:08:07.765] INIT: Entering runlevel: 5 [2025-09-24 14:08:07.924] mtd32 attached [2025-09-24 14:08:07.924] mtd24 attached [2025-09-24 14:08:07.940] mtd28 attached [2025-09-24 14:08:07.972] ubi0:dml_code is mounted. [2025-09-24 14:08:07.988] RTNETLINK answers: File exists [2025-09-24 14:08:08.046] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:08:08.046] ubi2:animations is mounted. [2025-09-24 14:08:08.046] ubi1:textures is mounted. [2025-09-24 14:08:08.046] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:08:08.046] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:08:08.046] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:08:08.046] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:08:08.046] data.LB_FadeInType0=100 [2025-09-24 14:08:08.046] data.CHLH_FadeInType0=0 [2025-09-24 14:08:08.046] data.WU_FadeInDelay=0 [2025-09-24 14:08:08.046] max_time_out=0 [2025-09-24 14:08:08.046] No splash screen [2025-09-24 14:08:08.046] stop dss Done [2025-09-24 14:08:08.130] /dev/mem opened. [2025-09-24 14:08:08.130] Memory mapped at address 0xffffaf957000. [2025-09-24 14:08:08.130] Read at address 0x00600018 (0xffffaf957018): 0x00000000 [2025-09-24 14:08:08.130] Write at address 0x00600018 (0xffffaf957018): 0x00400040, readback 0x00400040 [2025-09-24 14:08:08.146] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:08:08.162] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:08:08.321] Loaded PowerVR consumer services. [2025-09-24 14:08:08.337] 512+0 records in [2025-09-24 14:08:08.337] 512+0 records out [2025-09-24 14:08:08.369] Waiting data available... [2025-09-24 14:08:08.385] Starting syslogd/klogd: done [2025-09-24 14:08:08.417] DML Start [2025-09-24 14:08:08.592] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:08:08.833] DML res1: 0 [2025-09-24 14:08:09.248] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:08:09.264] Read Success [2025-09-24 14:08:09.264] Verifying certificate... [2025-09-24 14:08:09.504] Verified OK [2025-09-24 14:08:09.520] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:08:11.261] Verified OK [2025-09-24 14:08:11.261] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:08:11.803] Verified OK [2025-09-24 14:08:11.803] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:08:14.281] fs.protected_hardlinks = 1 [2025-09-24 14:08:14.308] fs.protected_symlinks = 1 [2025-09-24 14:08:14.308] kernel.modules_disabled = 1 [2025-09-24 14:08:14.484] [2025-09-24 14:08:14.484] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:08:15.907] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:08:23.655] SBL1:1210.0.1.0 [2025-09-24 14:08:23.703] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:08:25.270] SBL2:1210.0.1.0 [2025-09-24 14:08:25.317] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:08:25.414] j-A [2025-09-24 14:08:32.768] The R5 Autosar Classic is running [2025-09-24 14:08:32.789] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:08:32.789] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:08:33.396] INIT: version 2.96 booting [2025-09-24 14:08:33.508] INIT: Entering runlevel: 5 [2025-09-24 14:08:33.668] mtd28 attached [2025-09-24 14:08:33.684] mtd24 attached [2025-09-24 14:08:33.700] mtd32 attached [2025-09-24 14:08:33.732] ubi0:animations is mounted. [2025-09-24 14:08:33.802] ubi1:textures is mounted. [2025-09-24 14:08:33.802] RTNETLINK answers: File exists [2025-09-24 14:08:33.802] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:08:33.802] ubi2:dml_code is mounted. [2025-09-24 14:08:33.802] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:08:33.802] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:08:33.802] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:08:33.802] data.LB_FadeInType0=100 [2025-09-24 14:08:33.802] data.CHLH_FadeInType0=0 [2025-09-24 14:08:33.802] data.WU_FadeInDelay=0 [2025-09-24 14:08:33.802] max_time_out=0 [2025-09-24 14:08:33.802] No splash screen [2025-09-24 14:08:33.802] stop dss Done [2025-09-24 14:08:33.802] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:08:33.850] /dev/mem opened. [2025-09-24 14:08:33.850] Memory mapped at address 0xffffaf478000. [2025-09-24 14:08:33.876] Read at address 0x00600018 (0xffffaf478018): 0x00000000 [2025-09-24 14:08:33.876] Write at address 0x00600018 (0xffffaf478018): 0x00400040, readback 0x00400040 [2025-09-24 14:08:33.892] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:08:33.908] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:08:33.989] Loaded PowerVR consumer services. [2025-09-24 14:08:34.130] 512+0 records in [2025-09-24 14:08:34.130] 512+0 records out [2025-09-24 14:08:34.130] Waiting data available... [2025-09-24 14:08:34.162] Starting syslogd/klogd: done [2025-09-24 14:08:34.178] DML Start [2025-09-24 14:08:34.370] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:08:34.626] DML res1: 0 [2025-09-24 14:08:35.054] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:08:35.054] Read Success [2025-09-24 14:08:35.054] Verifying certificate... [2025-09-24 14:08:35.310] Verified OK [2025-09-24 14:08:35.326] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:08:36.972] Verified OK [2025-09-24 14:08:36.988] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:08:37.609] Verified OK [2025-09-24 14:08:37.609] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:08:40.295] fs.protected_hardlinks = 1 [2025-09-24 14:08:40.311] fs.protected_symlinks = 1 [2025-09-24 14:08:40.311] kernel.modules_disabled = 1 [2025-09-24 14:08:40.503] [2025-09-24 14:08:40.503] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:08:41.698] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:08:49.392] SBL1:1210.0.1.0 [2025-09-24 14:08:49.440] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:08:51.006] SBL2:1210.0.1.0 [2025-09-24 14:08:51.038] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:08:51.151] j-A [2025-09-24 14:08:58.505] The R5 Autosar Classic is running [2025-09-24 14:08:58.505] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:08:58.526] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:08:59.134] INIT: version 2.96 booting [2025-09-24 14:08:59.245] INIT: Entering runlevel: 5 [2025-09-24 14:08:59.406] mtd28 attached [2025-09-24 14:08:59.406] mtd24 attached [2025-09-24 14:08:59.421] mtd32 attached [2025-09-24 14:08:59.469] RTNETLINK answers: File exists [2025-09-24 14:08:59.469] ubi0:animations is mounted. [2025-09-24 14:08:59.535] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:08:59.535] ubi1:textures is mounted. [2025-09-24 14:08:59.535] ubi2:dml_code is mounted. [2025-09-24 14:08:59.535] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:08:59.535] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:08:59.535] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:08:59.535] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:08:59.535] data.LB_FadeInType0=100 [2025-09-24 14:08:59.535] data.CHLH_FadeInType0=0 [2025-09-24 14:08:59.535] data.WU_FadeInDelay=0 [2025-09-24 14:08:59.535] max_time_out=0 [2025-09-24 14:08:59.535] No splash screen [2025-09-24 14:08:59.535] stop dss Done [2025-09-24 14:08:59.605] /dev/mem opened. [2025-09-24 14:08:59.605] Memory mapped at address 0xffffaf21c000. [2025-09-24 14:08:59.605] Read at address 0x00600018 (0xffffaf21c018): 0x00000000 [2025-09-24 14:08:59.605] Write at address 0x00600018 (0xffffaf21c018): 0x00400040, readback 0x00400040 [2025-09-24 14:08:59.605] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:08:59.605] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:08:59.749] Loaded PowerVR consumer services. [2025-09-24 14:08:59.869] Waiting data available... [2025-09-24 14:08:59.869] 512+0 records in [2025-09-24 14:08:59.869] 512+0 records out [2025-09-24 14:08:59.885] Starting syslogd/klogd: done [2025-09-24 14:08:59.901] DML Start [2025-09-24 14:09:00.109] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:09:00.348] DML res1: 0 [2025-09-24 14:09:00.758] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:09:00.758] Read Success [2025-09-24 14:09:00.758] Verifying certificate... [2025-09-24 14:09:00.982] Verified OK [2025-09-24 14:09:00.998] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:09:02.653] Verified OK [2025-09-24 14:09:02.653] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:09:03.245] Verified OK [2025-09-24 14:09:03.245] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:09:05.915] fs.protected_hardlinks = 1 [2025-09-24 14:09:05.915] fs.protected_symlinks = 1 [2025-09-24 14:09:05.931] kernel.modules_disabled = 1 [2025-09-24 14:09:06.122] [2025-09-24 14:09:06.123] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:09:07.418] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:09:15.131] SBL1:1210.0.1.0 [2025-09-24 14:09:15.178] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:09:16.746] SBL2:1210.0.1.0 [2025-09-24 14:09:16.777] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:09:16.889] j-A [2025-09-24 14:09:24.262] The R5 Autosar Classic is running [2025-09-24 14:09:24.262] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:09:24.262] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:09:24.869] INIT: version 2.96 booting [2025-09-24 14:09:24.981] INIT: Entering runlevel: 5 [2025-09-24 14:09:25.125] mtd32 attached [2025-09-24 14:09:25.141] mtd24 attached [2025-09-24 14:09:25.157] mtd28 attached [2025-09-24 14:09:25.189] RTNETLINK answers: File exists [2025-09-24 14:09:25.237] ubi0:dml_code is mounted. [2025-09-24 14:09:25.237] ubi1:textures is mounted. [2025-09-24 14:09:25.237] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:09:25.237] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:09:25.237] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:09:25.237] ubi2:animations is mounted. [2025-09-24 14:09:25.237] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:09:25.237] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:09:25.263] data.LB_FadeInType0=100 [2025-09-24 14:09:25.263] data.CHLH_FadeInType0=0 [2025-09-24 14:09:25.263] data.WU_FadeInDelay=0 [2025-09-24 14:09:25.263] max_time_out=0 [2025-09-24 14:09:25.263] No splash screen [2025-09-24 14:09:25.263] stop dss Done [2025-09-24 14:09:25.291] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:09:25.291] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:09:25.329] /dev/mem opened. [2025-09-24 14:09:25.329] Memory mapped at address 0xffff8bee9000. [2025-09-24 14:09:25.329] Read at address 0x00600018 (0xffff8bee9018): 0x00000000 [2025-09-24 14:09:25.329] Write at address 0x00600018 (0xffff8bee9018): 0x00400040, readback 0x00400040 [2025-09-24 14:09:25.520] Loaded PowerVR consumer services. [2025-09-24 14:09:25.569] 512+0 records in [2025-09-24 14:09:25.569] 512+0 records out [2025-09-24 14:09:25.585] Waiting data available... [2025-09-24 14:09:25.617] Starting syslogd/klogd: done [2025-09-24 14:09:25.633] DML Start [2025-09-24 14:09:25.809] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:09:26.065] DML res1: 0 [2025-09-24 14:09:26.439] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:09:26.439] Read Success [2025-09-24 14:09:26.439] Verifying certificate... [2025-09-24 14:09:26.679] Verified OK [2025-09-24 14:09:26.696] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:09:28.277] Verified OK [2025-09-24 14:09:28.299] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:09:28.890] Verified OK [2025-09-24 14:09:28.890] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:09:31.734] fs.protected_hardlinks = 1 [2025-09-24 14:09:31.734] fs.protected_symlinks = 1 [2025-09-24 14:09:31.734] kernel.modules_disabled = 1 [2025-09-24 14:09:31.909] [2025-09-24 14:09:31.909] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:09:33.172] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:09:40.861] SBL1:1210.0.1.0 [2025-09-24 14:09:40.909] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:09:42.476] SBL2:1210.0.1.0 [2025-09-24 14:09:42.508] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:09:42.620] j-A [2025-09-24 14:09:49.993] The R5 Autosar Classic is running [2025-09-24 14:09:49.993] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:09:49.993] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:09:50.600] INIT: version 2.96 booting [2025-09-24 14:09:50.713] INIT: Entering runlevel: 5 [2025-09-24 14:09:50.856] mtd32 attached [2025-09-24 14:09:50.872] mtd24 attached [2025-09-24 14:09:50.888] mtd28 attached [2025-09-24 14:09:50.920] ubi0:dml_code is mounted. [2025-09-24 14:09:50.987] ubi1:textures is mounted. [2025-09-24 14:09:50.987] RTNETLINK answers: File exists [2025-09-24 14:09:50.987] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:09:50.987] ubi2:animations is mounted. [2025-09-24 14:09:50.987] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:09:50.987] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:09:50.987] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:09:50.987] data.LB_FadeInType0=100 [2025-09-24 14:09:50.987] data.CHLH_FadeInType0=0 [2025-09-24 14:09:50.987] data.WU_FadeInDelay=0 [2025-09-24 14:09:50.987] max_time_out=0 [2025-09-24 14:09:50.987] No splash screen [2025-09-24 14:09:50.987] stop dss Done [2025-09-24 14:09:50.987] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:09:51.036] /dev/mem opened. [2025-09-24 14:09:51.036] Memory mapped at address 0xffffb23a7000. [2025-09-24 14:09:51.062] Read at address 0x00600018 (0xffffb23a7018): 0x00000000 [2025-09-24 14:09:51.062] Write at address 0x00600018 (0xffffb23a7018): 0x00400040, readback 0x00400040 [2025-09-24 14:09:51.062] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:09:51.085] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:09:51.228] Loaded PowerVR consumer services. [2025-09-24 14:09:51.292] 512+0 records in [2025-09-24 14:09:51.292] 512+0 records out [2025-09-24 14:09:51.340] Waiting data available... [2025-09-24 14:09:51.340] Starting syslogd/klogd: done [2025-09-24 14:09:51.356] DML Start [2025-09-24 14:09:51.564] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:09:51.803] DML res1: 0 [2025-09-24 14:09:52.172] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:09:52.172] Read Success [2025-09-24 14:09:52.187] Verifying certificate... [2025-09-24 14:09:52.427] Verified OK [2025-09-24 14:09:52.443] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:09:53.986] Verified OK [2025-09-24 14:09:53.986] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:09:54.562] Verified OK [2025-09-24 14:09:54.562] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:09:57.406] fs.protected_hardlinks = 1 [2025-09-24 14:09:57.406] fs.protected_symlinks = 1 [2025-09-24 14:09:57.406] kernel.modules_disabled = 1 [2025-09-24 14:09:57.597] [2025-09-24 14:09:57.597] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:09:58.876] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:10:06.598] SBL1:1210.0.1.0 [2025-09-24 14:10:06.630] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:10:08.213] SBL2:1210.0.1.0 [2025-09-24 14:10:08.245] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:10:08.357] j-A [2025-09-24 14:10:15.727] The R5 Autosar Classic is running [2025-09-24 14:10:15.727] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:10:15.727] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:10:16.334] INIT: version 2.96 booting [2025-09-24 14:10:16.447] INIT: Entering runlevel: 5 [2025-09-24 14:10:16.591] mtd24 attached [2025-09-24 14:10:16.607] mtd32 attached [2025-09-24 14:10:16.607] mtd28 attached [2025-09-24 14:10:16.655] ubi0:textures is mounted. [2025-09-24 14:10:16.724] RTNETLINK answers: File exists [2025-09-24 14:10:16.724] ubi1:dml_code is mounted. [2025-09-24 14:10:16.724] ubi2:animations is mounted. [2025-09-24 14:10:16.724] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:10:16.724] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:10:16.724] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:10:16.724] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:10:16.724] data.LB_FadeInType0=100 [2025-09-24 14:10:16.724] data.CHLH_FadeInType0=0 [2025-09-24 14:10:16.724] data.WU_FadeInDelay=0 [2025-09-24 14:10:16.724] max_time_out=0 [2025-09-24 14:10:16.724] No splash screen [2025-09-24 14:10:16.724] stop dss Done [2025-09-24 14:10:16.724] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:10:16.755] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:10:16.755] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:10:16.805] /dev/mem opened. [2025-09-24 14:10:16.805] Memory mapped at address 0xffff969d6000. [2025-09-24 14:10:16.805] Read at address 0x00600018 (0xffff969d6018): 0x00000000 [2025-09-24 14:10:16.805] Write at address 0x00600018 (0xffff969d6018): 0x00400040, readback 0x00400040 [2025-09-24 14:10:16.917] Loaded PowerVR consumer services. [2025-09-24 14:10:17.030] Waiting data available... [2025-09-24 14:10:17.046] 512+0 records in [2025-09-24 14:10:17.046] 512+0 records out [2025-09-24 14:10:17.094] Starting syslogd/klogd: done [2025-09-24 14:10:17.110] DML Start [2025-09-24 14:10:17.301] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:10:17.525] DML res1: 0 [2025-09-24 14:10:17.966] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:10:17.966] Read Success [2025-09-24 14:10:17.966] Verifying certificate... [2025-09-24 14:10:18.189] Verified OK [2025-09-24 14:10:18.205] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:10:19.925] Verified OK [2025-09-24 14:10:19.925] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:10:20.557] Verified OK [2025-09-24 14:10:20.557] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:10:23.178] fs.protected_hardlinks = 1 [2025-09-24 14:10:23.194] fs.protected_symlinks = 1 [2025-09-24 14:10:23.194] kernel.modules_disabled = 1 [2025-09-24 14:10:23.386] [2025-09-24 14:10:23.386] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:10:24.600] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:10:32.328] SBL1:1210.0.1.0 [2025-09-24 14:10:32.376] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:10:33.942] SBL2:1210.0.1.0 [2025-09-24 14:10:33.974] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:10:34.087] j-A [2025-09-24 14:10:41.441] The R5 Autosar Classic is running [2025-09-24 14:10:41.441] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:10:41.461] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:10:42.069] INIT: version 2.96 booting [2025-09-24 14:10:42.181] INIT: Entering runlevel: 5 [2025-09-24 14:10:42.325] mtd28 attached [2025-09-24 14:10:42.341] mtd32 attached [2025-09-24 14:10:42.357] mtd24 attached [2025-09-24 14:10:42.373] ubi0:animations is mounted. [2025-09-24 14:10:42.405] RTNETLINK answers: File exists [2025-09-24 14:10:42.405] ubi1:dml_code is mounted. [2025-09-24 14:10:42.462] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:10:42.462] ubi2:textures is mounted. [2025-09-24 14:10:42.462] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:10:42.462] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:10:42.462] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:10:42.462] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:10:42.462] data.LB_FadeInType0=100 [2025-09-24 14:10:42.462] data.CHLH_FadeInType0=0 [2025-09-24 14:10:42.462] data.WU_FadeInDelay=0 [2025-09-24 14:10:42.462] max_time_out=0 [2025-09-24 14:10:42.462] No splash screen [2025-09-24 14:10:42.462] stop dss Done [2025-09-24 14:10:42.505] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:10:42.505] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:10:42.505] /dev/mem opened. [2025-09-24 14:10:42.505] Memory mapped at address 0xffffaa91c000. [2025-09-24 14:10:42.531] Read at address 0x00600018 (0xffffaa91c018): 0x00000000 [2025-09-24 14:10:42.531] Write at address 0x00600018 (0xffffaa91c018): 0x00400040, readback 0x00400040 [2025-09-24 14:10:42.722] Loaded PowerVR consumer services. [2025-09-24 14:10:42.810] Waiting data available... [2025-09-24 14:10:42.810] 512+0 records in [2025-09-24 14:10:42.810] 512+0 records out [2025-09-24 14:10:42.826] Starting syslogd/klogd: done [2025-09-24 14:10:42.842] DML Start [2025-09-24 14:10:43.018] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:10:43.257] DML res1: 0 [2025-09-24 14:10:43.673] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:10:43.695] Read Success [2025-09-24 14:10:43.695] Verifying certificate... [2025-09-24 14:10:43.951] Verified OK [2025-09-24 14:10:43.951] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:10:45.725] Verified OK [2025-09-24 14:10:45.725] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:10:46.317] Verified OK [2025-09-24 14:10:46.317] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:10:48.859] fs.protected_hardlinks = 1 [2025-09-24 14:10:48.859] fs.protected_symlinks = 1 [2025-09-24 14:10:48.875] kernel.modules_disabled = 1 [2025-09-24 14:10:49.067] [2025-09-24 14:10:49.067] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:10:50.337] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:10:58.062] SBL1:1210.0.1.0 [2025-09-24 14:10:58.094] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:10:59.677] SBL2:1210.0.1.0 [2025-09-24 14:10:59.709] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:10:59.820] j-A [2025-09-24 14:11:07.158] The R5 Autosar Classic is running [2025-09-24 14:11:07.189] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:11:07.189] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:11:07.797] INIT: version 2.96 booting [2025-09-24 14:11:07.908] INIT: Entering runlevel: 5 [2025-09-24 14:11:08.052] mtd24 attached [2025-09-24 14:11:08.068] mtd32 attached [2025-09-24 14:11:08.084] mtd28 attached [2025-09-24 14:11:08.132] RTNETLINK answers: File exists [2025-09-24 14:11:08.193] ubi0:textures is mounted. [2025-09-24 14:11:08.193] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:11:08.193] ubi2:animations is mounted. [2025-09-24 14:11:08.193] ubi1:dml_code is mounted. [2025-09-24 14:11:08.193] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:11:08.193] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:11:08.193] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:11:08.193] data.LB_FadeInType0=100 [2025-09-24 14:11:08.193] data.CHLH_FadeInType0=0 [2025-09-24 14:11:08.193] data.WU_FadeInDelay=0 [2025-09-24 14:11:08.193] max_time_out=0 [2025-09-24 14:11:08.193] No splash screen [2025-09-24 14:11:08.193] stop dss Done [2025-09-24 14:11:08.193] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:11:08.241] /dev/mem opened. [2025-09-24 14:11:08.241] Memory mapped at address 0xffffa175b000. [2025-09-24 14:11:08.280] Read at address 0x00600018 (0xffffa175b018): 0x00000000 [2025-09-24 14:11:08.280] Write at address 0x00600018 (0xffffa175b018): 0x00400040, readback 0x00400040 [2025-09-24 14:11:08.280] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:11:08.280] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:11:08.359] Loaded PowerVR consumer services. [2025-09-24 14:11:08.504] 512+0 records in [2025-09-24 14:11:08.504] 512+0 records out [2025-09-24 14:11:08.504] Waiting data available... [2025-09-24 14:11:08.552] Starting syslogd/klogd: done [2025-09-24 14:11:08.568] DML Start [2025-09-24 14:11:08.776] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:11:09.015] DML res1: 0 [2025-09-24 14:11:09.335] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:11:09.351] Read Success [2025-09-24 14:11:09.351] Verifying certificate... [2025-09-24 14:11:09.607] Verified OK [2025-09-24 14:11:09.639] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:11:11.462] Verified OK [2025-09-24 14:11:11.478] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:11:11.958] Verified OK [2025-09-24 14:11:11.958] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:11:14.371] fs.protected_hardlinks = 1 [2025-09-24 14:11:14.371] fs.protected_symlinks = 1 [2025-09-24 14:11:14.388] kernel.modules_disabled = 1 [2025-09-24 14:11:14.579] [2025-09-24 14:11:14.579] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:11:16.088] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:11:23.782] SBL1:1210.0.1.0 [2025-09-24 14:11:23.830] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:11:25.396] SBL2:1210.0.1.0 [2025-09-24 14:11:25.428] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:11:25.541] j-A [2025-09-24 14:11:32.915] The R5 Autosar Classic is running [2025-09-24 14:11:32.915] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:11:32.915] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:11:33.523] INIT: version 2.96 booting [2025-09-24 14:11:33.635] INIT: Entering runlevel: 5 [2025-09-24 14:11:33.795] mtd24 attached [2025-09-24 14:11:33.811] mtd32 attached [2025-09-24 14:11:33.811] mtd28 attached [2025-09-24 14:11:33.858] RTNETLINK answers: File exists [2025-09-24 14:11:33.922] ubi0:textures is mounted. [2025-09-24 14:11:33.922] ubi1:dml_code is mounted. [2025-09-24 14:11:33.922] ubi2:animations is mounted. [2025-09-24 14:11:33.922] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:11:33.922] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:11:33.922] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:11:33.922] data.LB_FadeInType0=100 [2025-09-24 14:11:33.922] data.CHLH_FadeInType0=0 [2025-09-24 14:11:33.922] data.WU_FadeInDelay=0 [2025-09-24 14:11:33.922] max_time_out=0 [2025-09-24 14:11:33.922] No splash screen [2025-09-24 14:11:33.922] stop dss Done [2025-09-24 14:11:33.922] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:11:33.922] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:11:33.954] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:11:33.987] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:11:33.987] /dev/mem opened. [2025-09-24 14:11:33.987] Memory mapped at address 0xffffbac64000. [2025-09-24 14:11:33.987] Read at address 0x00600018 (0xffffbac64018): 0x00000000 [2025-09-24 14:11:33.987] Write at address 0x00600018 (0xffffbac64018): 0x00400040, readback 0x00400040 [2025-09-24 14:11:34.147] Loaded PowerVR consumer services. [2025-09-24 14:11:34.244] 512+0 records in [2025-09-24 14:11:34.244] 512+0 records out [2025-09-24 14:11:34.244] Waiting data available... [2025-09-24 14:11:34.275] Starting syslogd/klogd: done [2025-09-24 14:11:34.291] DML Start [2025-09-24 14:11:34.499] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:11:34.691] DML res1: 0 [2025-09-24 14:11:35.117] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:11:35.117] Read Success [2025-09-24 14:11:35.117] Verifying certificate... [2025-09-24 14:11:35.374] Verified OK [2025-09-24 14:11:35.389] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:11:37.029] Verified OK [2025-09-24 14:11:37.029] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:11:37.637] Verified OK [2025-09-24 14:11:37.637] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:11:40.307] fs.protected_hardlinks = 1 [2025-09-24 14:11:40.307] fs.protected_symlinks = 1 [2025-09-24 14:11:40.322] kernel.modules_disabled = 1 [2025-09-24 14:11:40.515] [2025-09-24 14:11:40.515] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:11:41.781] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:11:49.511] SBL1:1210.0.1.0 [2025-09-24 14:11:49.559] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:11:51.125] SBL2:1210.0.1.0 [2025-09-24 14:11:51.173] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:11:51.269] j-A [2025-09-24 14:11:58.623] The R5 Autosar Classic is running [2025-09-24 14:11:58.647] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:11:58.647] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:11:59.254] INIT: version 2.96 booting [2025-09-24 14:11:59.366] INIT: Entering runlevel: 5 [2025-09-24 14:11:59.526] mtd32 attached [2025-09-24 14:11:59.526] mtd24 attached [2025-09-24 14:11:59.542] mtd28 attached [2025-09-24 14:11:59.589] ubi0:dml_code is mounted. [2025-09-24 14:11:59.589] RTNETLINK answers: File exists [2025-09-24 14:11:59.630] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:11:59.630] ubi1:textures is mounted. [2025-09-24 14:11:59.630] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:11:59.630] ubi2:animations is mounted. [2025-09-24 14:11:59.630] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:11:59.630] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:11:59.630] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:11:59.656] data.LB_FadeInType0=100 [2025-09-24 14:11:59.656] data.CHLH_FadeInType0=0 [2025-09-24 14:11:59.656] data.WU_FadeInDelay=0 [2025-09-24 14:11:59.656] max_time_out=0 [2025-09-24 14:11:59.656] No splash screen [2025-09-24 14:11:59.656] stop dss Done [2025-09-24 14:11:59.681] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:11:59.681] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:11:59.739] /dev/mem opened. [2025-09-24 14:11:59.739] Memory mapped at address 0xffffabfde000. [2025-09-24 14:11:59.739] Read at address 0x00600018 (0xffffabfde018): 0x00000000 [2025-09-24 14:11:59.739] Write at address 0x00600018 (0xffffabfde018): 0x00400040, readback 0x00400040 [2025-09-24 14:11:59.915] Loaded PowerVR consumer services. [2025-09-24 14:11:59.975] 512+0 records in [2025-09-24 14:11:59.975] 512+0 records out [2025-09-24 14:11:59.975] Waiting data available... [2025-09-24 14:11:59.992] Starting syslogd/klogd: done [2025-09-24 14:12:00.008] DML Start [2025-09-24 14:12:00.167] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:12:00.375] DML res1: 0 [2025-09-24 14:12:00.916] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:12:00.916] Read Success [2025-09-24 14:12:00.916] Verifying certificate... [2025-09-24 14:12:01.187] Verified OK [2025-09-24 14:12:01.219] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:12:02.910] Verified OK [2025-09-24 14:12:02.910] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:12:03.507] Verified OK [2025-09-24 14:12:03.507] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:12:06.050] fs.protected_hardlinks = 1 [2025-09-24 14:12:06.050] fs.protected_symlinks = 1 [2025-09-24 14:12:06.065] kernel.modules_disabled = 1 [2025-09-24 14:12:06.257] [2025-09-24 14:12:06.257] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:12:07.499] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:12:15.267] SBL1:1210.0.1.0 [2025-09-24 14:12:15.315] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:12:16.882] SBL2:1210.0.1.0 [2025-09-24 14:12:16.914] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:12:17.026] j-A [2025-09-24 14:12:24.379] The R5 Autosar Classic is running [2025-09-24 14:12:24.379] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:12:24.400] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:12:25.008] INIT: version 2.96 booting [2025-09-24 14:12:25.120] INIT: Entering runlevel: 5 [2025-09-24 14:12:25.263] mtd24 attached [2025-09-24 14:12:25.279] mtd28 attached [2025-09-24 14:12:25.295] mtd32 attached [2025-09-24 14:12:25.377] RTNETLINK answers: File exists [2025-09-24 14:12:25.377] ubi0:textures is mounted. [2025-09-24 14:12:25.377] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:12:25.377] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:12:25.377] ubi2:dml_code is mounted. [2025-09-24 14:12:25.377] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:12:25.377] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:12:25.377] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:12:25.377] ubi1:animations is mounted. [2025-09-24 14:12:25.405] data.LB_FadeInType0=100 [2025-09-24 14:12:25.405] data.CHLH_FadeInType0=0 [2025-09-24 14:12:25.405] data.WU_FadeInDelay=0 [2025-09-24 14:12:25.405] max_time_out=0 [2025-09-24 14:12:25.405] No splash screen [2025-09-24 14:12:25.405] stop dss Done [2025-09-24 14:12:25.479] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:12:25.479] /dev/mem opened. [2025-09-24 14:12:25.479] Memory mapped at address 0xffff88cab000. [2025-09-24 14:12:25.479] Read at address 0x00600018 (0xffff88cab018): 0x00000000 [2025-09-24 14:12:25.479] Write at address 0x00600018 (0xffff88cab018): 0x00400040, readback 0x00400040 [2025-09-24 14:12:25.479] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:12:25.592] Loaded PowerVR consumer services. [2025-09-24 14:12:25.720] 512+0 records in [2025-09-24 14:12:25.720] 512+0 records out [2025-09-24 14:12:25.736] Waiting data available... [2025-09-24 14:12:25.736] Starting syslogd/klogd: done [2025-09-24 14:12:25.767] DML Start [2025-09-24 14:12:25.975] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:12:26.166] DML res1: 0 [2025-09-24 14:12:26.622] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:12:26.622] Read Success [2025-09-24 14:12:26.622] Verifying certificate... [2025-09-24 14:12:26.895] Verified OK [2025-09-24 14:12:26.910] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:12:28.648] Verified OK [2025-09-24 14:12:28.648] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:12:29.238] Verified OK [2025-09-24 14:12:29.238] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:12:31.764] fs.protected_hardlinks = 1 [2025-09-24 14:12:31.764] fs.protected_symlinks = 1 [2025-09-24 14:12:31.780] kernel.modules_disabled = 1 [2025-09-24 14:12:31.972] [2025-09-24 14:12:31.972] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:12:33.264] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:12:41.001] SBL1:1210.0.1.0 [2025-09-24 14:12:41.049] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:12:42.615] SBL2:1210.0.1.0 [2025-09-24 14:12:42.663] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:12:42.759] j-A [2025-09-24 14:12:50.112] The R5 Autosar Classic is running [2025-09-24 14:12:50.136] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:12:50.136] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:12:50.744] INIT: version 2.96 booting [2025-09-24 14:12:50.856] INIT: Entering runlevel: 5 [2025-09-24 14:12:51.016] mtd24 attached [2025-09-24 14:12:51.032] mtd32 attached [2025-09-24 14:12:51.032] mtd28 attached [2025-09-24 14:12:51.128] ubi0:textures is mounted. [2025-09-24 14:12:51.128] RTNETLINK answers: File exists [2025-09-24 14:12:51.128] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:12:51.128] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:12:51.128] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:12:51.128] ubi1:dml_code is mounted. [2025-09-24 14:12:51.128] ubi2:animations is mounted. [2025-09-24 14:12:51.128] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:12:51.128] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:12:51.128] data.LB_FadeInType0=100 [2025-09-24 14:12:51.149] data.CHLH_FadeInType0=0 [2025-09-24 14:12:51.149] data.WU_FadeInDelay=0 [2025-09-24 14:12:51.149] max_time_out=0 [2025-09-24 14:12:51.149] No splash screen [2025-09-24 14:12:51.149] stop dss Done [2025-09-24 14:12:51.181] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:12:51.221] /dev/mem opened. [2025-09-24 14:12:51.221] Memory mapped at address 0xffffbcc6a000. [2025-09-24 14:12:51.221] Read at address 0x00600018 (0xffffbcc6a018): 0x00000000 [2025-09-24 14:12:51.221] Write at address 0x00600018 (0xffffbcc6a018): 0x00400040, readback 0x00400040 [2025-09-24 14:12:51.221] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:12:51.301] Loaded PowerVR consumer services. [2025-09-24 14:12:51.460] Waiting data available... [2025-09-24 14:12:51.460] 512+0 records in [2025-09-24 14:12:51.460] 512+0 records out [2025-09-24 14:12:51.476] Starting syslogd/klogd: done [2025-09-24 14:12:51.492] DML Start [2025-09-24 14:12:51.668] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:12:51.908] DML res1: 0 [2025-09-24 14:12:52.355] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:12:52.355] Read Success [2025-09-24 14:12:52.355] Verifying certificate... [2025-09-24 14:12:52.595] Verified OK [2025-09-24 14:12:52.611] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:12:54.173] Verified OK [2025-09-24 14:12:54.173] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:12:54.883] Verified OK [2025-09-24 14:12:54.883] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:12:57.554] fs.protected_hardlinks = 1 [2025-09-24 14:12:57.554] fs.protected_symlinks = 1 [2025-09-24 14:12:57.569] kernel.modules_disabled = 1 [2025-09-24 14:12:57.761] [2025-09-24 14:12:57.761] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:12:59.037] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:13:06.759] SBL1:1210.0.1.0 [2025-09-24 14:13:06.791] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:13:08.374] SBL2:1210.0.1.0 [2025-09-24 14:13:08.406] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:13:08.518] j-A [2025-09-24 14:13:15.856] The R5 Autosar Classic is running [2025-09-24 14:13:15.881] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:13:15.881] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:13:16.488] INIT: version 2.96 booting [2025-09-24 14:13:16.600] INIT: Entering runlevel: 5 [2025-09-24 14:13:16.760] mtd24 attached [2025-09-24 14:13:16.760] mtd28 attached [2025-09-24 14:13:16.776] mtd32 attached [2025-09-24 14:13:16.824] ubi0:textures is mounted. [2025-09-24 14:13:16.824] RTNETLINK answers: File exists [2025-09-24 14:13:16.865] ubi1:animations is mounted. [2025-09-24 14:13:16.865] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:13:16.865] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:13:16.865] ubi2:dml_code is mounted. [2025-09-24 14:13:16.865] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:13:16.865] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:13:16.865] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:13:16.888] data.LB_FadeInType0=100 [2025-09-24 14:13:16.888] data.CHLH_FadeInType0=0 [2025-09-24 14:13:16.888] data.WU_FadeInDelay=0 [2025-09-24 14:13:16.888] max_time_out=0 [2025-09-24 14:13:16.888] No splash screen [2025-09-24 14:13:16.888] stop dss Done [2025-09-24 14:13:16.904] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:13:16.931] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:13:16.965] /dev/mem opened. [2025-09-24 14:13:16.965] Memory mapped at address 0xffffb2ecf000. [2025-09-24 14:13:16.965] Read at address 0x00600018 (0xffffb2ecf018): 0x00000000 [2025-09-24 14:13:16.965] Write at address 0x00600018 (0xffffb2ecf018): 0x00400040, readback 0x00400040 [2025-09-24 14:13:17.044] Loaded PowerVR consumer services. [2025-09-24 14:13:17.211] Waiting data available... [2025-09-24 14:13:17.211] 512+0 records in [2025-09-24 14:13:17.211] 512+0 records out [2025-09-24 14:13:17.243] Starting syslogd/klogd: done [2025-09-24 14:13:17.259] DML Start [2025-09-24 14:13:17.468] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:13:17.691] DML res1: 0 [2025-09-24 14:13:18.123] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:13:18.144] Read Success [2025-09-24 14:13:18.144] Verifying certificate... [2025-09-24 14:13:18.384] Verified OK [2025-09-24 14:13:18.399] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:13:20.238] Verified OK [2025-09-24 14:13:20.238] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:13:20.778] Verified OK [2025-09-24 14:13:20.778] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:13:23.224] fs.protected_hardlinks = 1 [2025-09-24 14:13:23.240] fs.protected_symlinks = 1 [2025-09-24 14:13:23.240] kernel.modules_disabled = 1 [2025-09-24 14:13:23.432] [2025-09-24 14:13:23.432] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:13:24.750] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:13:32.518] SBL1:1210.0.1.0 [2025-09-24 14:13:32.566] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:13:34.131] SBL2:1210.0.1.0 [2025-09-24 14:13:34.163] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:13:34.276] j-A [2025-09-24 14:13:41.651] The R5 Autosar Classic is running [2025-09-24 14:13:41.651] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:13:41.651] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:13:42.259] INIT: version 2.96 booting [2025-09-24 14:13:42.370] INIT: Entering runlevel: 5 [2025-09-24 14:13:42.530] mtd24 attached [2025-09-24 14:13:42.530] mtd28 attached [2025-09-24 14:13:42.546] mtd32 attached [2025-09-24 14:13:42.594] RTNETLINK answers: File exists [2025-09-24 14:13:42.654] ubi1:animations is mounted. [2025-09-24 14:13:42.654] ubi0:textures is mounted. [2025-09-24 14:13:42.654] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:13:42.654] ubi2:dml_code is mounted. [2025-09-24 14:13:42.654] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:13:42.654] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:13:42.654] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:13:42.654] data.LB_FadeInType0=100 [2025-09-24 14:13:42.654] data.CHLH_FadeInType0=0 [2025-09-24 14:13:42.654] data.WU_FadeInDelay=0 [2025-09-24 14:13:42.654] max_time_out=0 [2025-09-24 14:13:42.654] No splash screen [2025-09-24 14:13:42.654] stop dss Done [2025-09-24 14:13:42.654] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:13:42.686] /dev/mem opened. [2025-09-24 14:13:42.686] Memory mapped at address 0xffffb5553000. [2025-09-24 14:13:42.712] Read at address 0x00600018 (0xffffb5553018): 0x00000000 [2025-09-24 14:13:42.712] Write at address 0x00600018 (0xffffb5553018): 0x00400040, readback 0x00400040 [2025-09-24 14:13:42.712] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:13:42.728] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:13:42.887] Loaded PowerVR consumer services. [2025-09-24 14:13:43.008] 512+0 records in [2025-09-24 14:13:43.008] 512+0 records out [2025-09-24 14:13:43.008] Waiting data available... [2025-09-24 14:13:43.040] Starting syslogd/klogd: done [2025-09-24 14:13:43.072] DML Start [2025-09-24 14:13:43.248] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:13:43.439] DML res1: 0 [2025-09-24 14:13:43.910] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:13:43.910] Read Success [2025-09-24 14:13:43.910] Verifying certificate... [2025-09-24 14:13:44.166] Verified OK [2025-09-24 14:13:44.182] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:13:45.860] Verified OK [2025-09-24 14:13:45.876] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:13:46.490] Verified OK [2025-09-24 14:13:46.490] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:13:48.969] fs.protected_hardlinks = 1 [2025-09-24 14:13:48.985] fs.protected_symlinks = 1 [2025-09-24 14:13:49.001] kernel.modules_disabled = 1 [2025-09-24 14:13:49.192] [2025-09-24 14:13:49.192] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:13:50.514] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:13:58.249] SBL1:1210.0.1.0 [2025-09-24 14:13:58.281] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:13:59.864] SBL2:1210.0.1.0 [2025-09-24 14:13:59.896] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:14:00.008] j-A [2025-09-24 14:14:07.378] The R5 Autosar Classic is running [2025-09-24 14:14:07.378] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:14:07.378] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:14:07.986] INIT: version 2.96 booting [2025-09-24 14:14:08.098] INIT: Entering runlevel: 5 [2025-09-24 14:14:08.243] mtd24 attached [2025-09-24 14:14:08.258] mtd28 attached [2025-09-24 14:14:08.274] mtd32 attached [2025-09-24 14:14:08.356] RTNETLINK answers: File exists [2025-09-24 14:14:08.356] ubi0:textures is mounted. [2025-09-24 14:14:08.356] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:14:08.356] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:14:08.356] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:14:08.356] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:14:08.356] ubi2:dml_code is mounted. [2025-09-24 14:14:08.356] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:14:08.356] ubi1:animations is mounted. [2025-09-24 14:14:08.386] data.LB_FadeInType0=100 [2025-09-24 14:14:08.386] data.CHLH_FadeInType0=0 [2025-09-24 14:14:08.386] data.WU_FadeInDelay=0 [2025-09-24 14:14:08.386] max_time_out=0 [2025-09-24 14:14:08.386] No splash screen [2025-09-24 14:14:08.386] stop dss Done [2025-09-24 14:14:08.402] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:14:08.418] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:14:08.434] /dev/mem opened. [2025-09-24 14:14:08.466] Memory mapped at address 0xffff9423c000. [2025-09-24 14:14:08.466] Read at address 0x00600018 (0xffff9423c018): 0x00000000 [2025-09-24 14:14:08.466] Write at address 0x00600018 (0xffff9423c018): 0x00400040, readback 0x00400040 [2025-09-24 14:14:08.546] Loaded PowerVR consumer services. [2025-09-24 14:14:08.690] 512+0 records in [2025-09-24 14:14:08.690] 512+0 records out [2025-09-24 14:14:08.706] Waiting data available... [2025-09-24 14:14:08.706] Starting syslogd/klogd: done [2025-09-24 14:14:08.738] DML Start [2025-09-24 14:14:08.897] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:14:09.105] DML res1: 0 [2025-09-24 14:14:09.598] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:14:09.598] Read Success [2025-09-24 14:14:09.598] Verifying certificate... [2025-09-24 14:14:09.838] Verified OK [2025-09-24 14:14:09.869] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:14:11.593] Verified OK [2025-09-24 14:14:11.593] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:14:12.213] Verified OK [2025-09-24 14:14:12.213] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:14:14.787] fs.protected_hardlinks = 1 [2025-09-24 14:14:14.803] fs.protected_symlinks = 1 [2025-09-24 14:14:14.819] kernel.modules_disabled = 1 [2025-09-24 14:14:15.011] [2025-09-24 14:14:15.011] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:14:16.235] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:14:23.996] SBL1:1210.0.1.0 [2025-09-24 14:14:24.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:14:25.610] SBL2:1210.0.1.0 [2025-09-24 14:14:25.642] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:14:25.755] j-A [2025-09-24 14:14:33.130] The R5 Autosar Classic is running [2025-09-24 14:14:33.130] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:14:33.130] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:14:33.737] INIT: version 2.96 booting [2025-09-24 14:14:33.849] INIT: Entering runlevel: 5 [2025-09-24 14:14:33.992] mtd32 attached [2025-09-24 14:14:34.009] mtd28 attached [2025-09-24 14:14:34.025] mtd24 attached [2025-09-24 14:14:34.057] ubi0:dml_code is mounted. [2025-09-24 14:14:34.073] RTNETLINK answers: File exists [2025-09-24 14:14:34.073] ubi2:textures is mounted. [2025-09-24 14:14:34.127] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:14:34.127] ubi1:animations is mounted. [2025-09-24 14:14:34.127] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:14:34.127] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:14:34.127] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:14:34.127] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:14:34.127] data.LB_FadeInType0=100 [2025-09-24 14:14:34.127] data.CHLH_FadeInType0=0 [2025-09-24 14:14:34.127] data.WU_FadeInDelay=0 [2025-09-24 14:14:34.127] max_time_out=0 [2025-09-24 14:14:34.127] No splash screen [2025-09-24 14:14:34.127] stop dss Done [2025-09-24 14:14:34.203] /dev/mem opened. [2025-09-24 14:14:34.203] Memory mapped at address 0xffff87808000. [2025-09-24 14:14:34.203] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:14:34.203] Read at address 0x00600018 (0xffff87808018): 0x00000000 [2025-09-24 14:14:34.203] Write at address 0x00600018 (0xffff87808018): 0x00400040, readback 0x00400040 [2025-09-24 14:14:34.203] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:14:34.331] Loaded PowerVR consumer services. [2025-09-24 14:14:34.442] Waiting data available... [2025-09-24 14:14:34.458] 512+0 records in [2025-09-24 14:14:34.458] 512+0 records out [2025-09-24 14:14:34.474] Starting syslogd/klogd: done [2025-09-24 14:14:34.506] DML Start [2025-09-24 14:14:34.698] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:14:34.906] DML res1: 0 [2025-09-24 14:14:35.353] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:14:35.353] Read Success [2025-09-24 14:14:35.353] Verifying certificate... [2025-09-24 14:14:35.609] Verified OK [2025-09-24 14:14:35.624] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:14:37.377] Verified OK [2025-09-24 14:14:37.377] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:14:37.898] Verified OK [2025-09-24 14:14:37.898] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:14:40.425] fs.protected_hardlinks = 1 [2025-09-24 14:14:40.440] fs.protected_symlinks = 1 [2025-09-24 14:14:40.440] kernel.modules_disabled = 1 [2025-09-24 14:14:40.632] [2025-09-24 14:14:40.632] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:14:42.015] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:14:49.724] SBL1:1210.0.1.0 [2025-09-24 14:14:49.772] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:14:51.339] SBL2:1210.0.1.0 [2025-09-24 14:14:51.387] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:14:51.483] j-A [2025-09-24 14:14:58.838] The R5 Autosar Classic is running [2025-09-24 14:14:58.859] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:14:58.859] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:14:59.466] INIT: version 2.96 booting [2025-09-24 14:14:59.579] INIT: Entering runlevel: 5 [2025-09-24 14:14:59.738] mtd24 attached [2025-09-24 14:14:59.738] mtd28 attached [2025-09-24 14:14:59.754] mtd32 attached [2025-09-24 14:14:59.802] ubi0:textures is mounted. [2025-09-24 14:14:59.837] RTNETLINK answers: File exists [2025-09-24 14:14:59.837] ubi1:animations is mounted. [2025-09-24 14:14:59.837] ubi2:dml_code is mounted. [2025-09-24 14:14:59.837] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:14:59.837] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:14:59.837] data.LB_FadeInType0=100 [2025-09-24 14:14:59.870] data.CHLH_FadeInType0=0 [2025-09-24 14:14:59.870] data.WU_FadeInDelay=0 [2025-09-24 14:14:59.870] max_time_out=0 [2025-09-24 14:14:59.870] No splash screen [2025-09-24 14:14:59.870] stop dss Done [2025-09-24 14:14:59.870] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:14:59.870] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:14:59.870] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:14:59.947] /dev/mem opened. [2025-09-24 14:14:59.947] Memory mapped at address 0xffff89f29000. [2025-09-24 14:14:59.947] Read at address 0x00600018 (0xffff89f29018): 0x00000000 [2025-09-24 14:14:59.947] Write at address 0x00600018 (0xffff89f29018): 0x00400040, readback 0x00400040 [2025-09-24 14:14:59.947] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:14:59.947] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:15:00.155] Loaded PowerVR consumer services. [2025-09-24 14:15:00.187] 512+0 records in [2025-09-24 14:15:00.187] 512+0 records out [2025-09-24 14:15:00.219] Waiting data available... [2025-09-24 14:15:00.234] Starting syslogd/klogd: done [2025-09-24 14:15:00.266] DML Start [2025-09-24 14:15:00.443] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:15:00.699] DML res1: 0 [2025-09-24 14:15:01.099] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:15:01.099] Read Success [2025-09-24 14:15:01.099] Verifying certificate... [2025-09-24 14:15:01.354] Verified OK [2025-09-24 14:15:01.370] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:15:03.128] Verified OK [2025-09-24 14:15:03.144] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:15:03.638] Verified OK [2025-09-24 14:15:03.638] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:15:06.162] fs.protected_hardlinks = 1 [2025-09-24 14:15:06.162] fs.protected_symlinks = 1 [2025-09-24 14:15:06.162] kernel.modules_disabled = 1 [2025-09-24 14:15:06.338] [2025-09-24 14:15:06.338] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:15:07.756] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:15:15.468] SBL1:1210.0.1.0 [2025-09-24 14:15:15.500] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:15:17.082] SBL2:1210.0.1.0 [2025-09-24 14:15:17.114] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:15:17.226] j-A [2025-09-24 14:15:24.598] The R5 Autosar Classic is running [2025-09-24 14:15:24.598] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:15:24.598] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:15:25.206] INIT: version 2.96 booting [2025-09-24 14:15:25.317] INIT: Entering runlevel: 5 [2025-09-24 14:15:25.462] mtd28 attached [2025-09-24 14:15:25.478] mtd24 attached [2025-09-24 14:15:25.494] mtd32 attached [2025-09-24 14:15:25.526] ubi0:animations is mounted. [2025-09-24 14:15:25.542] ubi1:textures is mounted. [2025-09-24 14:15:25.542] ubi2:dml_code is mounted. [2025-09-24 14:15:25.542] RTNETLINK answers: File exists [2025-09-24 14:15:25.597] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:15:25.597] data.LB_FadeInType0=100 [2025-09-24 14:15:25.597] data.CHLH_FadeInType0=0 [2025-09-24 14:15:25.597] data.WU_FadeInDelay=0 [2025-09-24 14:15:25.597] max_time_out=0 [2025-09-24 14:15:25.597] No splash screen [2025-09-24 14:15:25.597] stop dss Done [2025-09-24 14:15:25.597] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:15:25.597] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:15:25.597] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:15:25.612] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:15:25.661] /dev/mem opened. [2025-09-24 14:15:25.661] Memory mapped at address 0xffff90946000. [2025-09-24 14:15:25.661] Read at address 0x00600018 (0xffff90946018): 0x00000000 [2025-09-24 14:15:25.661] Write at address 0x00600018 (0xffff90946018): 0x00400040, readback 0x00400040 [2025-09-24 14:15:25.741] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:15:25.741] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:15:25.837] Loaded PowerVR consumer services. [2025-09-24 14:15:25.918] 512+0 records in [2025-09-24 14:15:25.918] 512+0 records out [2025-09-24 14:15:25.933] Waiting data available... [2025-09-24 14:15:25.965] Starting syslogd/klogd: done [2025-09-24 14:15:25.981] DML Start [2025-09-24 14:15:26.157] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:15:26.333] DML res1: 0 [2025-09-24 14:15:26.900] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:15:26.900] Read Success [2025-09-24 14:15:26.900] Verifying certificate... [2025-09-24 14:15:27.141] Verified OK [2025-09-24 14:15:27.157] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:15:28.835] Verified OK [2025-09-24 14:15:28.835] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:15:29.455] Verified OK [2025-09-24 14:15:29.455] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:15:32.012] fs.protected_hardlinks = 1 [2025-09-24 14:15:32.012] fs.protected_symlinks = 1 [2025-09-24 14:15:32.028] kernel.modules_disabled = 1 [2025-09-24 14:15:32.220] [2025-09-24 14:15:32.220] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:15:33.464] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:15:41.197] SBL1:1210.0.1.0 [2025-09-24 14:15:41.229] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:15:42.811] SBL2:1210.0.1.0 [2025-09-24 14:15:42.843] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:15:42.955] j-A [2025-09-24 14:15:50.293] The R5 Autosar Classic is running [2025-09-24 14:15:50.318] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:15:50.318] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:15:50.925] INIT: version 2.96 booting [2025-09-24 14:15:51.037] INIT: Entering runlevel: 5 [2025-09-24 14:15:51.198] mtd28 attached [2025-09-24 14:15:51.214] mtd32 attached [2025-09-24 14:15:51.214] mtd24 attached [2025-09-24 14:15:51.262] RTNETLINK answers: File exists [2025-09-24 14:15:51.328] ubi0:animations is mounted. [2025-09-24 14:15:51.328] ubi1:dml_code is mounted. [2025-09-24 14:15:51.328] ubi2:textures is mounted. [2025-09-24 14:15:51.328] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:15:51.328] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:15:51.328] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:15:51.328] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:15:51.328] data.LB_FadeInType0=100 [2025-09-24 14:15:51.328] data.CHLH_FadeInType0=0 [2025-09-24 14:15:51.328] data.WU_FadeInDelay=0 [2025-09-24 14:15:51.328] max_time_out=0 [2025-09-24 14:15:51.328] No splash screen [2025-09-24 14:15:51.328] stop dss Done [2025-09-24 14:15:51.328] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:15:51.344] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:15:51.360] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:15:51.397] /dev/mem opened. [2025-09-24 14:15:51.397] Memory mapped at address 0xffff8e196000. [2025-09-24 14:15:51.397] Read at address 0x00600018 (0xffff8e196018): 0x00000000 [2025-09-24 14:15:51.397] Write at address 0x00600018 (0xffff8e196018): 0x00400040, readback 0x00400040 [2025-09-24 14:15:51.508] Loaded PowerVR consumer services. [2025-09-24 14:15:51.645] Waiting data available... [2025-09-24 14:15:51.645] 512+0 records in [2025-09-24 14:15:51.645] 512+0 records out [2025-09-24 14:15:51.677] Starting syslogd/klogd: done [2025-09-24 14:15:51.693] DML Start [2025-09-24 14:15:51.918] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:15:52.157] DML res1: 0 [2025-09-24 14:15:52.469] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:15:52.469] Read Success [2025-09-24 14:15:52.469] Verifying certificate... [2025-09-24 14:15:52.709] Verified OK [2025-09-24 14:15:52.725] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:15:54.366] Verified OK [2025-09-24 14:15:54.366] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:15:55.006] Verified OK [2025-09-24 14:15:55.006] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:15:57.772] fs.protected_hardlinks = 1 [2025-09-24 14:15:57.772] fs.protected_symlinks = 1 [2025-09-24 14:15:57.787] kernel.modules_disabled = 1 [2025-09-24 14:15:57.980] [2025-09-24 14:15:57.980] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:15:59.197] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:16:06.933] SBL1:1210.0.1.0 [2025-09-24 14:16:06.965] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:16:08.548] SBL2:1210.0.1.0 [2025-09-24 14:16:08.580] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:16:08.691] j-A [2025-09-24 14:16:16.030] The R5 Autosar Classic is running [2025-09-24 14:16:16.061] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:16:16.061] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:16:16.668] INIT: version 2.96 booting [2025-09-24 14:16:16.781] INIT: Entering runlevel: 5 [2025-09-24 14:16:16.940] mtd32 attached [2025-09-24 14:16:16.940] mtd24 attached [2025-09-24 14:16:16.956] mtd28 attached [2025-09-24 14:16:17.005] RTNETLINK answers: File exists [2025-09-24 14:16:17.067] ubi1:textures is mounted. [2025-09-24 14:16:17.067] ubi0:dml_code is mounted. [2025-09-24 14:16:17.067] ubi2:animations is mounted. [2025-09-24 14:16:17.067] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:16:17.067] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:16:17.068] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:16:17.068] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:16:17.068] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:16:17.068] data.LB_FadeInType0=100 [2025-09-24 14:16:17.068] data.CHLH_FadeInType0=0 [2025-09-24 14:16:17.068] data.WU_FadeInDelay=0 [2025-09-24 14:16:17.068] max_time_out=0 [2025-09-24 14:16:17.068] No splash screen [2025-09-24 14:16:17.068] stop dss Done [2025-09-24 14:16:17.099] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:16:17.115] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:16:17.149] /dev/mem opened. [2025-09-24 14:16:17.149] Memory mapped at address 0xffff8a523000. [2025-09-24 14:16:17.149] Read at address 0x00600018 (0xffff8a523018): 0x00000000 [2025-09-24 14:16:17.149] Write at address 0x00600018 (0xffff8a523018): 0x00400040, readback 0x00400040 [2025-09-24 14:16:17.309] Loaded PowerVR consumer services. [2025-09-24 14:16:17.372] Waiting data available... [2025-09-24 14:16:17.388] 512+0 records in [2025-09-24 14:16:17.388] 512+0 records out [2025-09-24 14:16:17.404] Starting syslogd/klogd: done [2025-09-24 14:16:17.436] DML Start [2025-09-24 14:16:17.597] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:16:17.820] DML res1: 0 [2025-09-24 14:16:18.296] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:16:18.296] Read Success [2025-09-24 14:16:18.296] Verifying certificate... [2025-09-24 14:16:18.584] Verified OK [2025-09-24 14:16:18.600] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:16:20.124] Verified OK [2025-09-24 14:16:20.124] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:16:20.709] Verified OK [2025-09-24 14:16:20.709] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:16:23.522] fs.protected_hardlinks = 1 [2025-09-24 14:16:23.522] fs.protected_symlinks = 1 [2025-09-24 14:16:23.538] kernel.modules_disabled = 1 [2025-09-24 14:16:23.731] [2025-09-24 14:16:23.731] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:16:24.944] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:16:32.659] SBL1:1210.0.1.0 [2025-09-24 14:16:32.690] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:16:34.273] SBL2:1210.0.1.0 [2025-09-24 14:16:34.305] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:16:34.417] j-A [2025-09-24 14:16:41.756] The R5 Autosar Classic is running [2025-09-24 14:16:41.787] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:16:41.787] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:16:42.394] INIT: version 2.96 booting [2025-09-24 14:16:42.507] INIT: Entering runlevel: 5 [2025-09-24 14:16:42.650] mtd24 attached [2025-09-24 14:16:42.666] mtd32 attached [2025-09-24 14:16:42.682] mtd28 attached [2025-09-24 14:16:42.730] ubi0:textures is mounted. [2025-09-24 14:16:42.730] RTNETLINK answers: File exists [2025-09-24 14:16:42.789] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:16:42.789] ubi2:animations is mounted. [2025-09-24 14:16:42.789] ubi1:dml_code is mounted. [2025-09-24 14:16:42.789] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:16:42.789] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:16:42.789] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:16:42.789] data.LB_FadeInType0=100 [2025-09-24 14:16:42.789] data.CHLH_FadeInType0=0 [2025-09-24 14:16:42.789] data.WU_FadeInDelay=0 [2025-09-24 14:16:42.789] max_time_out=0 [2025-09-24 14:16:42.789] No splash screen [2025-09-24 14:16:42.789] stop dss Done [2025-09-24 14:16:42.789] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:16:42.880] /dev/mem opened. [2025-09-24 14:16:42.880] Memory mapped at address 0xffff99c82000. [2025-09-24 14:16:42.880] Read at address 0x00600018 (0xffff99c82018): 0x00000000 [2025-09-24 14:16:42.880] Write at address 0x00600018 (0xffff99c82018): 0x00400040, readback 0x00400040 [2025-09-24 14:16:42.880] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:16:42.880] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:16:42.960] Loaded PowerVR consumer services. [2025-09-24 14:16:43.114] 512+0 records in [2025-09-24 14:16:43.114] 512+0 records out [2025-09-24 14:16:43.114] Waiting data available... [2025-09-24 14:16:43.130] Starting syslogd/klogd: done [2025-09-24 14:16:43.146] DML Start [2025-09-24 14:16:43.305] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:16:43.530] DML res1: 0 [2025-09-24 14:16:44.039] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:16:44.039] Read Success [2025-09-24 14:16:44.039] Verifying certificate... [2025-09-24 14:16:44.311] Verified OK [2025-09-24 14:16:44.327] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:16:46.033] Verified OK [2025-09-24 14:16:46.033] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:16:46.655] Verified OK [2025-09-24 14:16:46.655] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:16:49.228] fs.protected_hardlinks = 1 [2025-09-24 14:16:49.244] fs.protected_symlinks = 1 [2025-09-24 14:16:49.244] kernel.modules_disabled = 1 [2025-09-24 14:16:49.452] [2025-09-24 14:16:49.452] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:16:50.664] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:16:58.384] SBL1:1210.0.1.0 [2025-09-24 14:16:58.432] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:17:00.000] SBL2:1210.0.1.0 [2025-09-24 14:17:00.048] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:17:00.144] j-A [2025-09-24 14:17:07.497] The R5 Autosar Classic is running [2025-09-24 14:17:07.521] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:17:07.521] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:17:08.127] INIT: version 2.96 booting [2025-09-24 14:17:08.239] INIT: Entering runlevel: 5 [2025-09-24 14:17:08.400] mtd32 attached [2025-09-24 14:17:08.415] mtd28 attached [2025-09-24 14:17:08.415] mtd24 attached [2025-09-24 14:17:08.463] RTNETLINK answers: File exists [2025-09-24 14:17:08.536] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:17:08.536] ubi0:dml_code is mounted. [2025-09-24 14:17:08.536] ubi1:animations is mounted. [2025-09-24 14:17:08.536] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:17:08.536] ubi2:textures is mounted. [2025-09-24 14:17:08.536] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:17:08.536] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:17:08.536] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:17:08.536] data.LB_FadeInType0=100 [2025-09-24 14:17:08.536] data.CHLH_FadeInType0=0 [2025-09-24 14:17:08.536] data.WU_FadeInDelay=0 [2025-09-24 14:17:08.536] max_time_out=0 [2025-09-24 14:17:08.536] No splash screen [2025-09-24 14:17:08.536] stop dss Done [2025-09-24 14:17:08.609] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:17:08.609] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:17:08.609] /dev/mem opened. [2025-09-24 14:17:08.609] Memory mapped at address 0xffff9c0b9000. [2025-09-24 14:17:08.609] Read at address 0x00600018 (0xffff9c0b9018): 0x00000000 [2025-09-24 14:17:08.609] Write at address 0x00600018 (0xffff9c0b9018): 0x00400040, readback 0x00400040 [2025-09-24 14:17:08.801] Loaded PowerVR consumer services. [2025-09-24 14:17:08.862] Waiting data available... [2025-09-24 14:17:08.862] 512+0 records in [2025-09-24 14:17:08.862] 512+0 records out [2025-09-24 14:17:08.894] Starting syslogd/klogd: done [2025-09-24 14:17:08.910] DML Start [2025-09-24 14:17:09.070] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:17:09.310] DML res1: 0 [2025-09-24 14:17:09.784] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:17:09.784] Read Success [2025-09-24 14:17:09.784] Verifying certificate... [2025-09-24 14:17:10.008] Verified OK [2025-09-24 14:17:10.024] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:17:11.708] Verified OK [2025-09-24 14:17:11.708] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:17:12.309] Verified OK [2025-09-24 14:17:12.309] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:17:15.027] fs.protected_hardlinks = 1 [2025-09-24 14:17:15.043] fs.protected_symlinks = 1 [2025-09-24 14:17:15.043] kernel.modules_disabled = 1 [2025-09-24 14:17:15.235] [2025-09-24 14:17:15.235] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:17:16.414] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:17:24.117] SBL1:1210.0.1.0 [2025-09-24 14:17:24.165] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:17:25.732] SBL2:1210.0.1.0 [2025-09-24 14:17:25.780] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:17:25.876] j-A [2025-09-24 14:17:33.229] The R5 Autosar Classic is running [2025-09-24 14:17:33.253] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:17:33.253] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:17:33.860] INIT: version 2.96 booting [2025-09-24 14:17:33.972] INIT: Entering runlevel: 5 [2025-09-24 14:17:34.133] mtd24 attached [2025-09-24 14:17:34.149] mtd28 attached [2025-09-24 14:17:34.164] mtd32 attached [2025-09-24 14:17:34.264] RTNETLINK answers: File exists [2025-09-24 14:17:34.264] ubi0:textures is mounted. [2025-09-24 14:17:34.264] ubi1:animations is mounted. [2025-09-24 14:17:34.264] ubi2:dml_code is mounted. [2025-09-24 14:17:34.264] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:17:34.264] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:17:34.264] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:17:34.264] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:17:34.264] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:17:34.264] data.LB_FadeInType0=100 [2025-09-24 14:17:34.264] data.CHLH_FadeInType0=0 [2025-09-24 14:17:34.264] data.WU_FadeInDelay=0 [2025-09-24 14:17:34.264] max_time_out=0 [2025-09-24 14:17:34.264] No splash screen [2025-09-24 14:17:34.264] stop dss Done [2025-09-24 14:17:34.348] /dev/mem opened. [2025-09-24 14:17:34.348] Memory mapped at address 0xffff9ae92000. [2025-09-24 14:17:34.348] Read at address 0x00600018 (0xffff9ae92018): 0x00000000 [2025-09-24 14:17:34.348] Write at address 0x00600018 (0xffff9ae92018): 0x00400040, readback 0x00400040 [2025-09-24 14:17:34.348] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:17:34.348] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:17:34.444] Loaded PowerVR consumer services. [2025-09-24 14:17:34.572] 512+0 records in [2025-09-24 14:17:34.572] 512+0 records out [2025-09-24 14:17:34.588] Waiting data available... [2025-09-24 14:17:34.604] Starting syslogd/klogd: done [2025-09-24 14:17:34.620] DML Start [2025-09-24 14:17:34.780] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:17:34.987] DML res1: 0 [2025-09-24 14:17:35.557] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:17:35.557] Read Success [2025-09-24 14:17:35.557] Verifying certificate... [2025-09-24 14:17:35.780] Verified OK [2025-09-24 14:17:35.812] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:17:37.459] Verified OK [2025-09-24 14:17:37.459] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:17:38.033] Verified OK [2025-09-24 14:17:38.033] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:17:40.780] fs.protected_hardlinks = 1 [2025-09-24 14:17:40.780] fs.protected_symlinks = 1 [2025-09-24 14:17:40.780] kernel.modules_disabled = 1 [2025-09-24 14:17:40.971] [2025-09-24 14:17:40.971] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:17:42.113] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:17:49.866] SBL1:1210.0.1.0 [2025-09-24 14:17:49.898] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:17:51.480] SBL2:1210.0.1.0 [2025-09-24 14:17:51.512] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:17:51.608] j-A [2025-09-24 14:17:58.961] The R5 Autosar Classic is running [2025-09-24 14:17:58.986] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:17:58.986] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:17:59.593] INIT: version 2.96 booting [2025-09-24 14:17:59.706] INIT: Entering runlevel: 5 [2025-09-24 14:17:59.865] mtd24 attached [2025-09-24 14:17:59.865] mtd28 attached [2025-09-24 14:17:59.881] mtd32 attached [2025-09-24 14:17:59.929] ubi0:textures is mounted. [2025-09-24 14:17:59.929] RTNETLINK answers: File exists [2025-09-24 14:18:00.002] ubi1:animations is mounted. [2025-09-24 14:18:00.002] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:18:00.002] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:18:00.002] ubi2:dml_code is mounted. [2025-09-24 14:18:00.002] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:18:00.002] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:18:00.002] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:18:00.002] data.LB_FadeInType0=100 [2025-09-24 14:18:00.002] data.CHLH_FadeInType0=0 [2025-09-24 14:18:00.002] data.WU_FadeInDelay=0 [2025-09-24 14:18:00.002] max_time_out=0 [2025-09-24 14:18:00.002] No splash screen [2025-09-24 14:18:00.002] stop dss Done [2025-09-24 14:18:00.068] /dev/mem opened. [2025-09-24 14:18:00.068] Memory mapped at address 0xffffacace000. [2025-09-24 14:18:00.068] Read at address 0x00600018 (0xffffacace018): 0x00000000 [2025-09-24 14:18:00.068] Write at address 0x00600018 (0xffffacace018): 0x00400040, readback 0x00400040 [2025-09-24 14:18:00.084] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:18:00.100] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:18:00.275] Loaded PowerVR consumer services. [2025-09-24 14:18:00.307] Waiting data available... [2025-09-24 14:18:00.323] 512+0 records in [2025-09-24 14:18:00.323] 512+0 records out [2025-09-24 14:18:00.356] Starting syslogd/klogd: done [2025-09-24 14:18:00.372] DML Start [2025-09-24 14:18:00.564] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:18:00.772] DML res1: 0 [2025-09-24 14:18:01.169] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:18:01.169] Read Success [2025-09-24 14:18:01.169] Verifying certificate... [2025-09-24 14:18:01.393] Verified OK [2025-09-24 14:18:01.409] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:18:02.972] Verified OK [2025-09-24 14:18:02.972] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:18:03.505] Verified OK [2025-09-24 14:18:03.505] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:18:06.431] fs.protected_hardlinks = 1 [2025-09-24 14:18:06.431] fs.protected_symlinks = 1 [2025-09-24 14:18:06.447] kernel.modules_disabled = 1 [2025-09-24 14:18:06.638] [2025-09-24 14:18:06.638] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:18:07.866] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:18:15.604] SBL1:1210.0.1.0 [2025-09-24 14:18:15.651] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:18:17.218] SBL2:1210.0.1.0 [2025-09-24 14:18:17.250] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:18:17.363] j-A [2025-09-24 14:18:24.734] The R5 Autosar Classic is running [2025-09-24 14:18:24.734] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:18:24.734] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:18:25.341] INIT: version 2.96 booting [2025-09-24 14:18:25.454] INIT: Entering runlevel: 5 [2025-09-24 14:18:25.614] mtd32 attached [2025-09-24 14:18:25.614] mtd24 attached [2025-09-24 14:18:25.629] mtd28 attached [2025-09-24 14:18:25.677] ubi0:dml_code is mounted. [2025-09-24 14:18:25.677] RTNETLINK answers: File exists [2025-09-24 14:18:25.738] ubi2:animations is mounted. [2025-09-24 14:18:25.738] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:18:25.738] ubi1:textures is mounted. [2025-09-24 14:18:25.738] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:18:25.738] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:18:25.738] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:18:25.738] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:18:25.738] data.LB_FadeInType0=100 [2025-09-24 14:18:25.738] data.CHLH_FadeInType0=0 [2025-09-24 14:18:25.738] data.WU_FadeInDelay=0 [2025-09-24 14:18:25.738] max_time_out=0 [2025-09-24 14:18:25.738] No splash screen [2025-09-24 14:18:25.738] stop dss Done [2025-09-24 14:18:25.780] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:18:25.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:18:25.796] /dev/mem opened. [2025-09-24 14:18:25.796] Memory mapped at address 0xffff9fa70000. [2025-09-24 14:18:25.822] Read at address 0x00600018 (0xffff9fa70018): 0x00000000 [2025-09-24 14:18:25.822] Write at address 0x00600018 (0xffff9fa70018): 0x00400040, readback 0x00400040 [2025-09-24 14:18:25.901] Loaded PowerVR consumer services. [2025-09-24 14:18:26.045] 512+0 records in [2025-09-24 14:18:26.045] 512+0 records out [2025-09-24 14:18:26.045] Waiting data available... [2025-09-24 14:18:26.093] Starting syslogd/klogd: done [2025-09-24 14:18:26.110] DML Start [2025-09-24 14:18:26.332] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:18:26.541] DML res1: 0 [2025-09-24 14:18:26.903] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:18:26.903] Read Success [2025-09-24 14:18:26.903] Verifying certificate... [2025-09-24 14:18:27.175] Verified OK [2025-09-24 14:18:27.191] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:18:28.877] Verified OK [2025-09-24 14:18:28.877] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:18:29.530] Verified OK [2025-09-24 14:18:29.530] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:18:32.200] fs.protected_hardlinks = 1 [2025-09-24 14:18:32.200] fs.protected_symlinks = 1 [2025-09-24 14:18:32.216] kernel.modules_disabled = 1 [2025-09-24 14:18:32.408] [2025-09-24 14:18:32.408] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:18:33.606] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:18:41.348] SBL1:1210.0.1.0 [2025-09-24 14:18:41.396] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:18:42.962] SBL2:1210.0.1.0 [2025-09-24 14:18:42.994] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:18:43.106] j-A [2025-09-24 14:18:50.480] The R5 Autosar Classic is running [2025-09-24 14:18:50.480] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:18:50.480] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:18:51.087] INIT: version 2.96 booting [2025-09-24 14:18:51.199] INIT: Entering runlevel: 5 [2025-09-24 14:18:51.359] mtd32 attached [2025-09-24 14:18:51.359] mtd24 attached [2025-09-24 14:18:51.375] mtd28 attached [2025-09-24 14:18:51.457] RTNETLINK answers: File exists [2025-09-24 14:18:51.457] ubi1:textures is mounted. [2025-09-24 14:18:51.457] ubi0:dml_code is mounted. [2025-09-24 14:18:51.457] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:18:51.457] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:18:51.457] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:18:51.457] ubi2:animations is mounted. [2025-09-24 14:18:51.457] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:18:51.457] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:18:51.487] data.LB_FadeInType0=100 [2025-09-24 14:18:51.487] data.CHLH_FadeInType0=0 [2025-09-24 14:18:51.487] data.WU_FadeInDelay=0 [2025-09-24 14:18:51.487] max_time_out=0 [2025-09-24 14:18:51.487] No splash screen [2025-09-24 14:18:51.487] stop dss Done [2025-09-24 14:18:51.520] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:18:51.535] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:18:51.573] /dev/mem opened. [2025-09-24 14:18:51.573] Memory mapped at address 0xffff9a034000. [2025-09-24 14:18:51.573] Read at address 0x00600018 (0xffff9a034018): 0x00000000 [2025-09-24 14:18:51.573] Write at address 0x00600018 (0xffff9a034018): 0x00400040, readback 0x00400040 [2025-09-24 14:18:51.718] Loaded PowerVR consumer services. [2025-09-24 14:18:51.781] 512+0 records in [2025-09-24 14:18:51.781] 512+0 records out [2025-09-24 14:18:51.813] Waiting data available... [2025-09-24 14:18:51.845] Starting syslogd/klogd: done [2025-09-24 14:18:51.861] DML Start [2025-09-24 14:18:52.038] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:18:52.213] DML res1: 0 [2025-09-24 14:18:52.787] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:18:52.787] Read Success [2025-09-24 14:18:52.787] Verifying certificate... [2025-09-24 14:18:53.028] Verified OK [2025-09-24 14:18:53.028] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:18:54.530] Verified OK [2025-09-24 14:18:54.546] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:18:55.197] Verified OK [2025-09-24 14:18:55.197] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:18:57.851] fs.protected_hardlinks = 1 [2025-09-24 14:18:57.851] fs.protected_symlinks = 1 [2025-09-24 14:18:57.867] kernel.modules_disabled = 1 [2025-09-24 14:18:58.044] [2025-09-24 14:18:58.044] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:18:59.370] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:19:07.068] SBL1:1210.0.1.0 [2025-09-24 14:19:07.116] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:19:08.682] SBL2:1210.0.1.0 [2025-09-24 14:19:08.730] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:19:08.826] j-A [2025-09-24 14:19:16.180] The R5 Autosar Classic is running [2025-09-24 14:19:16.204] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:19:16.204] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:19:16.811] INIT: version 2.96 booting [2025-09-24 14:19:16.923] INIT: Entering runlevel: 5 [2025-09-24 14:19:17.067] mtd24 attached [2025-09-24 14:19:17.083] mtd28 attached [2025-09-24 14:19:17.099] mtd32 attached [2025-09-24 14:19:17.147] RTNETLINK answers: File exists [2025-09-24 14:19:17.147] ubi0:textures is mounted. [2025-09-24 14:19:17.208] ubi1:animations is mounted. [2025-09-24 14:19:17.208] ubi2:dml_code is mounted. [2025-09-24 14:19:17.208] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:19:17.208] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:19:17.208] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:19:17.208] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:19:17.208] data.LB_FadeInType0=100 [2025-09-24 14:19:17.208] data.CHLH_FadeInType0=0 [2025-09-24 14:19:17.208] data.WU_FadeInDelay=0 [2025-09-24 14:19:17.208] max_time_out=0 [2025-09-24 14:19:17.208] No splash screen [2025-09-24 14:19:17.208] stop dss Done [2025-09-24 14:19:17.208] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:19:17.299] /dev/mem opened. [2025-09-24 14:19:17.299] Memory mapped at address 0xffff842a1000. [2025-09-24 14:19:17.299] Read at address 0x00600018 (0xffff842a1018): 0x00000000 [2025-09-24 14:19:17.299] Write at address 0x00600018 (0xffff842a1018): 0x00400040, readback 0x00400040 [2025-09-24 14:19:17.299] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:19:17.299] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:19:17.379] Loaded PowerVR consumer services. [2025-09-24 14:19:17.537] Waiting data available... [2025-09-24 14:19:17.537] 512+0 records in [2025-09-24 14:19:17.537] 512+0 records out [2025-09-24 14:19:17.569] Starting syslogd/klogd: done [2025-09-24 14:19:17.585] DML Start [2025-09-24 14:19:17.778] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:19:18.017] DML res1: 0 [2025-09-24 14:19:18.369] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:19:18.390] Read Success [2025-09-24 14:19:18.390] Verifying certificate... [2025-09-24 14:19:18.630] Verified OK [2025-09-24 14:19:18.646] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:19:20.260] Verified OK [2025-09-24 14:19:20.260] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:19:20.978] Verified OK [2025-09-24 14:19:20.978] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:19:23.664] fs.protected_hardlinks = 1 [2025-09-24 14:19:23.679] fs.protected_symlinks = 1 [2025-09-24 14:19:23.679] kernel.modules_disabled = 1 [2025-09-24 14:19:23.871] [2025-09-24 14:19:23.871] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:19:25.098] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:19:32.805] SBL1:1210.0.1.0 [2025-09-24 14:19:32.837] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:19:34.420] SBL2:1210.0.1.0 [2025-09-24 14:19:34.452] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:19:34.565] j-A [2025-09-24 14:19:41.933] The R5 Autosar Classic is running [2025-09-24 14:19:41.933] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:19:41.933] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:19:42.540] INIT: version 2.96 booting [2025-09-24 14:19:42.653] INIT: Entering runlevel: 5 [2025-09-24 14:19:42.813] mtd28 attached [2025-09-24 14:19:42.813] mtd24 attached [2025-09-24 14:19:42.844] mtd32 attached [2025-09-24 14:19:42.876] ubi0:animations is mounted. [2025-09-24 14:19:42.876] RTNETLINK answers: File exists [2025-09-24 14:19:42.924] ubi1:textures is mounted. [2025-09-24 14:19:42.924] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:19:42.924] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:19:42.924] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:19:42.924] ubi2:dml_code is mounted. [2025-09-24 14:19:42.924] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:19:42.924] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:19:42.924] data.LB_FadeInType0=100 [2025-09-24 14:19:42.924] data.CHLH_FadeInType0=0 [2025-09-24 14:19:42.924] data.WU_FadeInDelay=0 [2025-09-24 14:19:42.945] max_time_out=0 [2025-09-24 14:19:42.945] No splash screen [2025-09-24 14:19:42.945] stop dss Done [2025-09-24 14:19:42.977] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:19:42.993] /dev/mem opened. [2025-09-24 14:19:42.993] Memory mapped at address 0xffff85b2e000. [2025-09-24 14:19:43.025] Read at address 0x00600018 (0xffff85b2e018): 0x00000000 [2025-09-24 14:19:43.025] Write at address 0x00600018 (0xffff85b2e018): 0x00400040, readback 0x00400040 [2025-09-24 14:19:43.025] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:19:43.105] Loaded PowerVR consumer services. [2025-09-24 14:19:43.260] Waiting data available... [2025-09-24 14:19:43.260] 512+0 records in [2025-09-24 14:19:43.260] 512+0 records out [2025-09-24 14:19:43.292] Starting syslogd/klogd: done [2025-09-24 14:19:43.308] DML Start [2025-09-24 14:19:43.516] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:19:43.772] DML res1: 0 [2025-09-24 14:19:44.139] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:19:44.160] Read Success [2025-09-24 14:19:44.160] Verifying certificate... [2025-09-24 14:19:44.416] Verified OK [2025-09-24 14:19:44.432] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:19:46.095] Verified OK [2025-09-24 14:19:46.110] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:19:46.694] Verified OK [2025-09-24 14:19:46.694] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:19:49.348] fs.protected_hardlinks = 1 [2025-09-24 14:19:49.348] fs.protected_symlinks = 1 [2025-09-24 14:19:49.364] kernel.modules_disabled = 1 [2025-09-24 14:19:49.539] [2025-09-24 14:19:49.539] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:19:50.818] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:19:58.536] SBL1:1210.0.1.0 [2025-09-24 14:19:58.568] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:20:00.151] SBL2:1210.0.1.0 [2025-09-24 14:20:00.183] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:20:00.295] j-A [2025-09-24 14:20:07.665] The R5 Autosar Classic is running [2025-09-24 14:20:07.665] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:20:07.665] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:20:08.272] INIT: version 2.96 booting [2025-09-24 14:20:08.384] INIT: Entering runlevel: 5 [2025-09-24 14:20:08.545] mtd32 attached [2025-09-24 14:20:08.545] mtd24 attached [2025-09-24 14:20:08.561] mtd28 attached [2025-09-24 14:20:08.577] ubi0:dml_code is mounted. [2025-09-24 14:20:08.608] RTNETLINK answers: File exists [2025-09-24 14:20:08.608] ubi1:textures is mounted. [2025-09-24 14:20:08.641] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:20:08.641] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:20:08.641] ubi2:animations is mounted. [2025-09-24 14:20:08.641] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:20:08.641] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:20:08.668] data.LB_FadeInType0=100 [2025-09-24 14:20:08.668] data.CHLH_FadeInType0=0 [2025-09-24 14:20:08.668] data.WU_FadeInDelay=0 [2025-09-24 14:20:08.668] max_time_out=0 [2025-09-24 14:20:08.668] No splash screen [2025-09-24 14:20:08.668] stop dss Done [2025-09-24 14:20:08.668] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:20:08.700] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:20:08.740] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:20:08.740] /dev/mem opened. [2025-09-24 14:20:08.740] Memory mapped at address 0xffffb3d9d000. [2025-09-24 14:20:08.740] Read at address 0x00600018 (0xffffb3d9d018): 0x00000000 [2025-09-24 14:20:08.740] Write at address 0x00600018 (0xffffb3d9d018): 0x00400040, readback 0x00400040 [2025-09-24 14:20:08.948] Loaded PowerVR consumer services. [2025-09-24 14:20:08.995] 512+0 records in [2025-09-24 14:20:08.995] 512+0 records out [2025-09-24 14:20:09.028] Waiting data available... [2025-09-24 14:20:09.044] Starting syslogd/klogd: done [2025-09-24 14:20:09.060] DML Start [2025-09-24 14:20:09.236] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:20:09.459] DML res1: 0 [2025-09-24 14:20:09.875] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:20:09.891] Read Success [2025-09-24 14:20:09.891] Verifying certificate... [2025-09-24 14:20:10.115] Verified OK [2025-09-24 14:20:10.130] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:20:11.790] Verified OK [2025-09-24 14:20:11.790] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:20:12.314] Verified OK [2025-09-24 14:20:12.314] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:20:15.160] fs.protected_hardlinks = 1 [2025-09-24 14:20:15.160] fs.protected_symlinks = 1 [2025-09-24 14:20:15.176] kernel.modules_disabled = 1 [2025-09-24 14:20:15.367] [2025-09-24 14:20:15.367] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:20:16.569] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:20:24.291] SBL1:1210.0.1.0 [2025-09-24 14:20:24.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:20:25.905] SBL2:1210.0.1.0 [2025-09-24 14:20:25.937] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:20:26.049] j-A [2025-09-24 14:20:33.388] The R5 Autosar Classic is running [2025-09-24 14:20:33.413] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:20:33.413] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:20:34.020] INIT: version 2.96 booting [2025-09-24 14:20:34.132] INIT: Entering runlevel: 5 [2025-09-24 14:20:34.292] mtd28 attached [2025-09-24 14:20:34.292] mtd24 attached [2025-09-24 14:20:34.308] mtd32 attached [2025-09-24 14:20:34.389] ubi0:animations is mounted. [2025-09-24 14:20:34.389] RTNETLINK answers: File exists [2025-09-24 14:20:34.389] ubi1:textures is mounted. [2025-09-24 14:20:34.389] ubi2:dml_code is mounted. [2025-09-24 14:20:34.389] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:20:34.389] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:20:34.389] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:20:34.389] data.LB_FadeInType0=100 [2025-09-24 14:20:34.427] data.CHLH_FadeInType0=0 [2025-09-24 14:20:34.427] data.WU_FadeInDelay=0 [2025-09-24 14:20:34.427] max_time_out=0 [2025-09-24 14:20:34.427] No splash screen [2025-09-24 14:20:34.427] stop dss Done [2025-09-24 14:20:34.427] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:20:34.427] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:20:34.486] /dev/mem opened. [2025-09-24 14:20:34.486] Memory mapped at address 0xffffa8bdb000. [2025-09-24 14:20:34.486] Read at address 0x00600018 (0xffffa8bdb018): 0x00000000 [2025-09-24 14:20:34.486] Write at address 0x00600018 (0xffffa8bdb018): 0x00400040, readback 0x00400040 [2025-09-24 14:20:34.518] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:20:34.534] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:20:34.693] Loaded PowerVR consumer services. [2025-09-24 14:20:34.741] 512+0 records in [2025-09-24 14:20:34.741] 512+0 records out [2025-09-24 14:20:34.741] Waiting data available... [2025-09-24 14:20:34.774] Starting syslogd/klogd: done [2025-09-24 14:20:34.790] DML Start [2025-09-24 14:20:34.934] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:20:35.109] DML res1: 0 [2025-09-24 14:20:35.732] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:20:35.732] Read Success [2025-09-24 14:20:35.732] Verifying certificate... [2025-09-24 14:20:35.955] Verified OK [2025-09-24 14:20:35.972] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:20:37.634] Verified OK [2025-09-24 14:20:37.634] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:20:38.257] Verified OK [2025-09-24 14:20:38.278] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:20:40.836] fs.protected_hardlinks = 1 [2025-09-24 14:20:40.852] fs.protected_symlinks = 1 [2025-09-24 14:20:40.852] kernel.modules_disabled = 1 [2025-09-24 14:20:41.059] [2025-09-24 14:20:41.059] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:20:42.307] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:20:50.007] SBL1:1210.0.1.0 [2025-09-24 14:20:50.055] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:20:51.622] SBL2:1210.0.1.0 [2025-09-24 14:20:51.670] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:20:51.765] j-A [2025-09-24 14:20:59.120] The R5 Autosar Classic is running [2025-09-24 14:20:59.142] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:20:59.142] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:20:59.750] INIT: version 2.96 booting [2025-09-24 14:20:59.861] INIT: Entering runlevel: 5 [2025-09-24 14:21:00.021] mtd24 attached [2025-09-24 14:21:00.021] mtd28 attached [2025-09-24 14:21:00.038] mtd32 attached [2025-09-24 14:21:00.070] ubi0:textures is mounted. [2025-09-24 14:21:00.157] RTNETLINK answers: File exists [2025-09-24 14:21:00.157] ubi1:animations is mounted. [2025-09-24 14:21:00.157] ubi2:dml_code is mounted. [2025-09-24 14:21:00.157] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:21:00.157] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:21:00.157] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:21:00.157] data.LB_FadeInType0=100 [2025-09-24 14:21:00.157] data.CHLH_FadeInType0=0 [2025-09-24 14:21:00.157] data.WU_FadeInDelay=0 [2025-09-24 14:21:00.157] max_time_out=0 [2025-09-24 14:21:00.157] No splash screen [2025-09-24 14:21:00.157] stop dss Done [2025-09-24 14:21:00.157] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:21:00.157] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:21:00.221] /dev/mem opened. [2025-09-24 14:21:00.221] Memory mapped at address 0xffff827ca000. [2025-09-24 14:21:00.221] Read at address 0x00600018 (0xffff827ca018): 0x00000000 [2025-09-24 14:21:00.221] Write at address 0x00600018 (0xffff827ca018): 0x00400040, readback 0x00400040 [2025-09-24 14:21:00.221] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:21:00.237] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:21:00.429] Loaded PowerVR consumer services. [2025-09-24 14:21:00.460] Waiting data available... [2025-09-24 14:21:00.476] 512+0 records in [2025-09-24 14:21:00.476] 512+0 records out [2025-09-24 14:21:00.508] Starting syslogd/klogd: done [2025-09-24 14:21:00.524] DML Start [2025-09-24 14:21:00.717] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:21:00.924] DML res1: 0 [2025-09-24 14:21:01.402] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:21:01.402] Read Success [2025-09-24 14:21:01.402] Verifying certificate... [2025-09-24 14:21:01.673] Verified OK [2025-09-24 14:21:01.689] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:21:03.348] Verified OK [2025-09-24 14:21:03.348] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:21:03.956] Verified OK [2025-09-24 14:21:03.956] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:21:06.561] fs.protected_hardlinks = 1 [2025-09-24 14:21:06.561] fs.protected_symlinks = 1 [2025-09-24 14:21:06.577] kernel.modules_disabled = 1 [2025-09-24 14:21:06.769] [2025-09-24 14:21:06.769] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:21:08.006] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:21:15.757] SBL1:1210.0.1.0 [2025-09-24 14:21:15.805] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:21:17.371] SBL2:1210.0.1.0 [2025-09-24 14:21:17.419] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:21:17.515] j-A [2025-09-24 14:21:24.870] The R5 Autosar Classic is running [2025-09-24 14:21:24.870] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:21:24.891] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:21:25.499] INIT: version 2.96 booting [2025-09-24 14:21:25.612] INIT: Entering runlevel: 5 [2025-09-24 14:21:25.755] mtd28 attached [2025-09-24 14:21:25.771] mtd24 attached [2025-09-24 14:21:25.787] mtd32 attached [2025-09-24 14:21:25.835] ubi0:animations is mounted. [2025-09-24 14:21:25.835] ubi1:textures is mounted. [2025-09-24 14:21:25.891] RTNETLINK answers: File exists [2025-09-24 14:21:25.891] ubi2:dml_code is mounted. [2025-09-24 14:21:25.891] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:21:25.891] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:21:25.891] data.LB_FadeInType0=100 [2025-09-24 14:21:25.891] data.CHLH_FadeInType0=0 [2025-09-24 14:21:25.891] data.WU_FadeInDelay=0 [2025-09-24 14:21:25.891] max_time_out=0 [2025-09-24 14:21:25.891] No splash screen [2025-09-24 14:21:25.891] stop dss Done [2025-09-24 14:21:25.891] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:21:25.891] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:21:25.891] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:21:25.955] /dev/mem opened. [2025-09-24 14:21:25.955] Memory mapped at address 0xffffae0c0000. [2025-09-24 14:21:25.955] Read at address 0x00600018 (0xffffae0c0018): 0x00000000 [2025-09-24 14:21:25.955] Write at address 0x00600018 (0xffffae0c0018): 0x00400040, readback 0x00400040 [2025-09-24 14:21:25.987] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:21:26.019] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:21:26.179] Loaded PowerVR consumer services. [2025-09-24 14:21:26.212] 512+0 records in [2025-09-24 14:21:26.212] 512+0 records out [2025-09-24 14:21:26.244] Waiting data available... [2025-09-24 14:21:26.260] Starting syslogd/klogd: done [2025-09-24 14:21:26.276] DML Start [2025-09-24 14:21:26.435] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:21:26.627] DML res1: 0 [2025-09-24 14:21:27.123] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:21:27.139] Read Success [2025-09-24 14:21:27.139] Verifying certificate... [2025-09-24 14:21:27.411] Verified OK [2025-09-24 14:21:27.426] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:21:29.056] Verified OK [2025-09-24 14:21:29.056] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:21:29.616] Verified OK [2025-09-24 14:21:29.616] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:21:32.398] fs.protected_hardlinks = 1 [2025-09-24 14:21:32.398] fs.protected_symlinks = 1 [2025-09-24 14:21:32.414] kernel.modules_disabled = 1 [2025-09-24 14:21:32.605] [2025-09-24 14:21:32.605] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:21:33.751] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:21:41.514] SBL1:1210.0.1.0 [2025-09-24 14:21:41.562] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:21:43.129] SBL2:1210.0.1.0 [2025-09-24 14:21:43.177] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:21:43.273] j-A [2025-09-24 14:21:50.628] The R5 Autosar Classic is running [2025-09-24 14:21:50.651] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:21:50.651] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:21:51.258] INIT: version 2.96 booting [2025-09-24 14:21:51.369] INIT: Entering runlevel: 5 [2025-09-24 14:21:51.530] mtd24 attached [2025-09-24 14:21:51.545] mtd28 attached [2025-09-24 14:21:51.561] mtd32 attached [2025-09-24 14:21:51.593] ubi0:textures is mounted. [2025-09-24 14:21:51.593] RTNETLINK answers: File exists [2025-09-24 14:21:51.609] ubi1:animations is mounted. [2025-09-24 14:21:51.609] ubi2:dml_code is mounted. [2025-09-24 14:21:51.625] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:21:51.625] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:21:51.669] data.LB_FadeInType0=100 [2025-09-24 14:21:51.669] data.CHLH_FadeInType0=0 [2025-09-24 14:21:51.669] data.WU_FadeInDelay=0 [2025-09-24 14:21:51.669] max_time_out=0 [2025-09-24 14:21:51.669] No splash screen [2025-09-24 14:21:51.669] stop dss Done [2025-09-24 14:21:51.669] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:21:51.669] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:21:51.669] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:21:51.724] /dev/mem opened. [2025-09-24 14:21:51.724] Memory mapped at address 0xffff7fd07000. [2025-09-24 14:21:51.724] Read at address 0x00600018 (0xffff7fd07018): 0x00000000 [2025-09-24 14:21:51.724] Write at address 0x00600018 (0xffff7fd07018): 0x00400040, readback 0x00400040 [2025-09-24 14:21:51.740] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:21:51.756] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:21:51.836] Loaded PowerVR consumer services. [2025-09-24 14:21:51.963] Waiting data available... [2025-09-24 14:21:51.980] 512+0 records in [2025-09-24 14:21:51.980] 512+0 records out [2025-09-24 14:21:52.012] Starting syslogd/klogd: done [2025-09-24 14:21:52.028] DML Start [2025-09-24 14:21:52.219] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:21:52.428] DML res1: 0 [2025-09-24 14:21:52.885] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:21:52.885] Read Success [2025-09-24 14:21:52.885] Verifying certificate... [2025-09-24 14:21:53.108] Verified OK [2025-09-24 14:21:53.140] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:21:54.668] Verified OK [2025-09-24 14:21:54.668] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:21:55.243] Verified OK [2025-09-24 14:21:55.243] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:21:57.994] fs.protected_hardlinks = 1 [2025-09-24 14:21:58.010] fs.protected_symlinks = 1 [2025-09-24 14:21:58.010] kernel.modules_disabled = 1 [2025-09-24 14:21:58.185] [2025-09-24 14:21:58.185] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:21:59.519] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:22:07.246] SBL1:1210.0.1.0 [2025-09-24 14:22:07.294] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:22:08.861] SBL2:1210.0.1.0 [2025-09-24 14:22:08.909] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:22:09.004] j-A [2025-09-24 14:22:16.359] The R5 Autosar Classic is running [2025-09-24 14:22:16.382] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:22:16.382] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:22:16.989] INIT: version 2.96 booting [2025-09-24 14:22:17.102] INIT: Entering runlevel: 5 [2025-09-24 14:22:17.245] mtd24 attached [2025-09-24 14:22:17.261] mtd32 attached [2025-09-24 14:22:17.277] mtd28 attached [2025-09-24 14:22:17.325] ubi0:textures is mounted. [2025-09-24 14:22:17.325] RTNETLINK answers: File exists [2025-09-24 14:22:17.361] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:22:17.361] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:22:17.361] ubi2:animations is mounted. [2025-09-24 14:22:17.361] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:22:17.361] ubi1:dml_code is mounted. [2025-09-24 14:22:17.361] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:22:17.361] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:22:17.384] data.LB_FadeInType0=100 [2025-09-24 14:22:17.384] data.CHLH_FadeInType0=0 [2025-09-24 14:22:17.384] data.WU_FadeInDelay=0 [2025-09-24 14:22:17.384] max_time_out=0 [2025-09-24 14:22:17.384] No splash screen [2025-09-24 14:22:17.384] stop dss Done [2025-09-24 14:22:17.429] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:22:17.429] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:22:17.468] /dev/mem opened. [2025-09-24 14:22:17.468] Memory mapped at address 0xffffa1d35000. [2025-09-24 14:22:17.468] Read at address 0x00600018 (0xffffa1d35018): 0x00000000 [2025-09-24 14:22:17.468] Write at address 0x00600018 (0xffffa1d35018): 0x00400040, readback 0x00400040 [2025-09-24 14:22:17.548] Loaded PowerVR consumer services. [2025-09-24 14:22:17.692] 512+0 records in [2025-09-24 14:22:17.692] 512+0 records out [2025-09-24 14:22:17.692] Waiting data available... [2025-09-24 14:22:17.739] Starting syslogd/klogd: done [2025-09-24 14:22:17.756] DML Start [2025-09-24 14:22:17.931] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:22:18.172] DML res1: 0 [2025-09-24 14:22:18.604] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:22:18.620] Read Success [2025-09-24 14:22:18.620] Verifying certificate... [2025-09-24 14:22:18.875] Verified OK [2025-09-24 14:22:18.891] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:22:20.624] Verified OK [2025-09-24 14:22:20.624] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:22:21.176] Verified OK [2025-09-24 14:22:21.176] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:22:23.861] fs.protected_hardlinks = 1 [2025-09-24 14:22:23.861] fs.protected_symlinks = 1 [2025-09-24 14:22:23.877] kernel.modules_disabled = 1 [2025-09-24 14:22:24.070] [2025-09-24 14:22:24.070] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:22:25.298] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:22:32.998] SBL1:1210.0.1.0 [2025-09-24 14:22:33.030] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:22:34.612] SBL2:1210.0.1.0 [2025-09-24 14:22:34.644] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:22:34.756] j-A [2025-09-24 14:22:42.094] The R5 Autosar Classic is running [2025-09-24 14:22:42.119] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:22:42.119] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:22:42.727] INIT: version 2.96 booting [2025-09-24 14:22:42.839] INIT: Entering runlevel: 5 [2025-09-24 14:22:42.999] mtd28 attached [2025-09-24 14:22:43.015] mtd32 attached [2025-09-24 14:22:43.015] mtd24 attached [2025-09-24 14:22:43.063] ubi0:animations is mounted. [2025-09-24 14:22:43.063] RTNETLINK answers: File exists [2025-09-24 14:22:43.079] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:22:43.079] ubi1:dml_code is mounted. [2025-09-24 14:22:43.131] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:22:43.131] ubi2:textures is mounted. [2025-09-24 14:22:43.131] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:22:43.131] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:22:43.131] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:22:43.131] data.LB_FadeInType0=100 [2025-09-24 14:22:43.131] data.CHLH_FadeInType0=0 [2025-09-24 14:22:43.131] data.WU_FadeInDelay=0 [2025-09-24 14:22:43.131] max_time_out=0 [2025-09-24 14:22:43.131] No splash screen [2025-09-24 14:22:43.131] stop dss Done [2025-09-24 14:22:43.163] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:22:43.206] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:22:43.206] /dev/mem opened. [2025-09-24 14:22:43.206] Memory mapped at address 0xffff950e1000. [2025-09-24 14:22:43.206] Read at address 0x00600018 (0xffff950e1018): 0x00000000 [2025-09-24 14:22:43.206] Write at address 0x00600018 (0xffff950e1018): 0x00400040, readback 0x00400040 [2025-09-24 14:22:43.382] Loaded PowerVR consumer services. [2025-09-24 14:22:43.445] 512+0 records in [2025-09-24 14:22:43.445] 512+0 records out [2025-09-24 14:22:43.477] Starting syslogd/klogd: Waiting data available... [2025-09-24 14:22:43.493] done [2025-09-24 14:22:43.509] DML Start [2025-09-24 14:22:43.702] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:22:43.941] DML res1: 0 [2025-09-24 14:22:44.351] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:22:44.351] Read Success [2025-09-24 14:22:44.351] Verifying certificate... [2025-09-24 14:22:44.575] Verified OK [2025-09-24 14:22:44.591] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:22:46.313] Verified OK [2025-09-24 14:22:46.313] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:22:46.825] Verified OK [2025-09-24 14:22:46.825] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:22:49.383] fs.protected_hardlinks = 1 [2025-09-24 14:22:49.399] fs.protected_symlinks = 1 [2025-09-24 14:22:49.399] kernel.modules_disabled = 1 [2025-09-24 14:22:49.590] [2025-09-24 14:22:49.590] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:22:51.019] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:22:58.738] SBL1:1210.0.1.0 [2025-09-24 14:22:58.786] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:23:00.352] SBL2:1210.0.1.0 [2025-09-24 14:23:00.384] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:23:00.497] j-A [2025-09-24 14:23:07.851] The R5 Autosar Classic is running [2025-09-24 14:23:07.851] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:23:07.871] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:23:08.479] INIT: version 2.96 booting [2025-09-24 14:23:08.591] INIT: Entering runlevel: 5 [2025-09-24 14:23:08.751] mtd32 attached [2025-09-24 14:23:08.751] mtd24 attached [2025-09-24 14:23:08.767] mtd28 attached [2025-09-24 14:23:08.783] ubi0:dml_code is mounted. [2025-09-24 14:23:08.815] RTNETLINK answers: File exists [2025-09-24 14:23:08.864] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:23:08.864] ubi1:textures is mounted. [2025-09-24 14:23:08.864] ubi2:animations is mounted. [2025-09-24 14:23:08.864] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:23:08.864] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:23:08.864] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:23:08.864] data.LB_FadeInType0=100 [2025-09-24 14:23:08.864] data.CHLH_FadeInType0=0 [2025-09-24 14:23:08.864] data.WU_FadeInDelay=0 [2025-09-24 14:23:08.864] max_time_out=0 [2025-09-24 14:23:08.864] No splash screen [2025-09-24 14:23:08.864] stop dss Done [2025-09-24 14:23:08.864] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:23:08.912] /dev/mem opened. [2025-09-24 14:23:08.912] Memory mapped at address 0xffffa694a000. [2025-09-24 14:23:08.938] Read at address 0x00600018 (0xffffa694a018): 0x00000000 [2025-09-24 14:23:08.938] Write at address 0x00600018 (0xffffa694a018): 0x00400040, readback 0x00400040 [2025-09-24 14:23:08.954] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:23:08.970] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:23:09.162] Loaded PowerVR consumer services. [2025-09-24 14:23:09.178] 512+0 records in [2025-09-24 14:23:09.178] 512+0 records out [2025-09-24 14:23:09.210] Waiting data available... [2025-09-24 14:23:09.226] Starting syslogd/klogd: done [2025-09-24 14:23:09.241] DML Start [2025-09-24 14:23:09.433] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:23:09.657] DML res1: 0 [2025-09-24 14:23:10.057] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:23:10.078] Read Success [2025-09-24 14:23:10.078] Verifying certificate... [2025-09-24 14:23:10.350] Verified OK [2025-09-24 14:23:10.366] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:23:12.045] Verified OK [2025-09-24 14:23:12.045] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:23:12.721] Verified OK [2025-09-24 14:23:12.721] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:23:15.375] fs.protected_hardlinks = 1 [2025-09-24 14:23:15.401] fs.protected_symlinks = 1 [2025-09-24 14:23:15.401] kernel.modules_disabled = 1 [2025-09-24 14:23:15.577] [2025-09-24 14:23:15.577] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:23:16.689] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:23:24.457] SBL1:1210.0.1.0 [2025-09-24 14:23:24.505] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:23:26.071] SBL2:1210.0.1.0 [2025-09-24 14:23:26.119] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:23:26.215] j-A [2025-09-24 14:23:33.569] The R5 Autosar Classic is running [2025-09-24 14:23:33.594] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:23:33.594] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:23:34.202] INIT: version 2.96 booting [2025-09-24 14:23:34.313] INIT: Entering runlevel: 5 [2025-09-24 14:23:34.457] mtd24 attached [2025-09-24 14:23:34.473] mtd32 attached [2025-09-24 14:23:34.489] mtd28 attached [2025-09-24 14:23:34.537] RTNETLINK answers: File exists [2025-09-24 14:23:34.537] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:23:34.574] ubi0:textures is mounted. [2025-09-24 14:23:34.574] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:23:34.574] ubi2:animations is mounted. [2025-09-24 14:23:34.574] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:23:34.574] ubi1:dml_code is mounted. [2025-09-24 14:23:34.574] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:23:34.574] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:23:34.601] data.LB_FadeInType0=100 [2025-09-24 14:23:34.601] data.CHLH_FadeInType0=0 [2025-09-24 14:23:34.601] data.WU_FadeInDelay=0 [2025-09-24 14:23:34.601] max_time_out=0 [2025-09-24 14:23:34.601] No splash screen [2025-09-24 14:23:34.601] stop dss Done [2025-09-24 14:23:34.616] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:23:34.638] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:23:34.674] /dev/mem opened. [2025-09-24 14:23:34.674] Memory mapped at address 0xffffb5db7000. [2025-09-24 14:23:34.674] Read at address 0x00600018 (0xffffb5db7018): 0x00000000 [2025-09-24 14:23:34.674] Write at address 0x00600018 (0xffffb5db7018): 0x00400040, readback 0x00400040 [2025-09-24 14:23:34.867] Loaded PowerVR consumer services. [2025-09-24 14:23:34.944] 512+0 records in [2025-09-24 14:23:34.944] 512+0 records out [2025-09-24 14:23:34.944] Waiting data available... [2025-09-24 14:23:34.960] Starting syslogd/klogd: done [2025-09-24 14:23:34.976] DML Start [2025-09-24 14:23:35.153] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:23:35.360] DML res1: 0 [2025-09-24 14:23:35.823] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:23:35.823] Read Success [2025-09-24 14:23:35.823] Verifying certificate... [2025-09-24 14:23:36.079] Verified OK [2025-09-24 14:23:36.095] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:23:37.838] Verified OK [2025-09-24 14:23:37.838] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:23:38.453] Verified OK [2025-09-24 14:23:38.453] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:23:40.948] fs.protected_hardlinks = 1 [2025-09-24 14:23:40.948] fs.protected_symlinks = 1 [2025-09-24 14:23:40.964] kernel.modules_disabled = 1 [2025-09-24 14:23:41.156] [2025-09-24 14:23:41.156] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:23:42.489] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:23:50.202] SBL1:1210.0.1.0 [2025-09-24 14:23:50.234] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:23:51.816] SBL2:1210.0.1.0 [2025-09-24 14:23:51.848] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:23:51.961] j-A [2025-09-24 14:23:59.297] The R5 Autosar Classic is running [2025-09-24 14:23:59.328] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:23:59.328] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:23:59.936] INIT: version 2.96 booting [2025-09-24 14:24:00.048] INIT: Entering runlevel: 5 [2025-09-24 14:24:00.208] mtd28 attached [2025-09-24 14:24:00.208] mtd24 attached [2025-09-24 14:24:00.224] mtd32 attached [2025-09-24 14:24:00.271] RTNETLINK answers: File exists [2025-09-24 14:24:00.272] ubi0:animations is mounted. [2025-09-24 14:24:00.339] ubi1:textures is mounted. [2025-09-24 14:24:00.339] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:24:00.339] ubi2:dml_code is mounted. [2025-09-24 14:24:00.339] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:24:00.339] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:24:00.339] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:24:00.339] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:24:00.339] data.LB_FadeInType0=100 [2025-09-24 14:24:00.339] data.CHLH_FadeInType0=0 [2025-09-24 14:24:00.339] data.WU_FadeInDelay=0 [2025-09-24 14:24:00.339] max_time_out=0 [2025-09-24 14:24:00.339] No splash screen [2025-09-24 14:24:00.339] stop dss Done [2025-09-24 14:24:00.370] /dev/mem opened. [2025-09-24 14:24:00.402] Memory mapped at address 0xffff8cd63000. [2025-09-24 14:24:00.402] Read at address 0x00600018 (0xffff8cd63018): 0x00000000 [2025-09-24 14:24:00.402] Write at address 0x00600018 (0xffff8cd63018): 0x00400040, readback 0x00400040 [2025-09-24 14:24:00.418] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:24:00.434] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:24:00.595] Loaded PowerVR consumer services. [2025-09-24 14:24:00.681] Waiting data available... [2025-09-24 14:24:00.681] 512+0 records in [2025-09-24 14:24:00.681] 512+0 records out [2025-09-24 14:24:00.697] Starting syslogd/klogd: done [2025-09-24 14:24:00.713] DML Start [2025-09-24 14:24:00.888] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:24:01.112] DML res1: 0 [2025-09-24 14:24:01.560] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:24:01.560] Read Success [2025-09-24 14:24:01.576] Verifying certificate... [2025-09-24 14:24:01.831] Verified OK [2025-09-24 14:24:01.847] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:24:03.494] Verified OK [2025-09-24 14:24:03.494] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:24:04.166] Verified OK [2025-09-24 14:24:04.166] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:24:06.819] fs.protected_hardlinks = 1 [2025-09-24 14:24:06.835] fs.protected_symlinks = 1 [2025-09-24 14:24:06.835] kernel.modules_disabled = 1 [2025-09-24 14:24:07.043] [2025-09-24 14:24:07.043] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:24:08.219] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:24:15.930] SBL1:1210.0.1.0 [2025-09-24 14:24:15.978] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:24:17.546] SBL2:1210.0.1.0 [2025-09-24 14:24:17.593] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:24:17.689] j-A [2025-09-24 14:24:25.042] The R5 Autosar Classic is running [2025-09-24 14:24:25.064] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:24:25.064] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:24:25.671] INIT: version 2.96 booting [2025-09-24 14:24:25.783] INIT: Entering runlevel: 5 [2025-09-24 14:24:25.944] mtd24 attached [2025-09-24 14:24:25.960] mtd32 attached [2025-09-24 14:24:25.960] mtd28 attached [2025-09-24 14:24:26.007] ubi0:textures is mounted. [2025-09-24 14:24:26.023] RTNETLINK answers: File exists [2025-09-24 14:24:26.076] ubi2:animations is mounted. [2025-09-24 14:24:26.076] ubi1:dml_code is mounted. [2025-09-24 14:24:26.076] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:24:26.076] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:24:26.076] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:24:26.076] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:24:26.076] data.LB_FadeInType0=100 [2025-09-24 14:24:26.076] data.CHLH_FadeInType0=0 [2025-09-24 14:24:26.076] data.WU_FadeInDelay=0 [2025-09-24 14:24:26.076] max_time_out=0 [2025-09-24 14:24:26.076] No splash screen [2025-09-24 14:24:26.076] stop dss Done [2025-09-24 14:24:26.076] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:24:26.092] /dev/mem opened. [2025-09-24 14:24:26.124] Memory mapped at address 0xffff9cd97000. [2025-09-24 14:24:26.124] Read at address 0x00600018 (0xffff9cd97018): 0x00000000 [2025-09-24 14:24:26.124] Write at address 0x00600018 (0xffff9cd97018): 0x00400040, readback 0x00400040 [2025-09-24 14:24:26.180] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:24:26.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:24:26.356] Loaded PowerVR consumer services. [2025-09-24 14:24:26.388] 512+0 records in [2025-09-24 14:24:26.388] 512+0 records out [2025-09-24 14:24:26.404] Waiting data available... [2025-09-24 14:24:26.435] Starting syslogd/klogd: done [2025-09-24 14:24:26.467] DML Start [2025-09-24 14:24:26.644] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:24:26.884] DML res1: 0 [2025-09-24 14:24:27.249] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:24:27.249] Read Success [2025-09-24 14:24:27.249] Verifying certificate... [2025-09-24 14:24:27.488] Verified OK [2025-09-24 14:24:27.504] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:24:29.087] Verified OK [2025-09-24 14:24:29.088] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:24:29.731] Verified OK [2025-09-24 14:24:29.731] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:24:32.401] fs.protected_hardlinks = 1 [2025-09-24 14:24:32.417] fs.protected_symlinks = 1 [2025-09-24 14:24:32.417] kernel.modules_disabled = 1 [2025-09-24 14:24:32.609] [2025-09-24 14:24:32.609] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:24:33.962] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:24:41.672] SBL1:1210.0.1.0 [2025-09-24 14:24:41.720] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:24:43.287] SBL2:1210.0.1.0 [2025-09-24 14:24:43.335] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:24:43.431] j-A [2025-09-24 14:24:50.784] The R5 Autosar Classic is running [2025-09-24 14:24:50.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:24:50.807] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:24:51.415] INIT: version 2.96 booting [2025-09-24 14:24:51.526] INIT: Entering runlevel: 5 [2025-09-24 14:24:51.670] mtd24 attached [2025-09-24 14:24:51.686] mtd28 attached [2025-09-24 14:24:51.702] mtd32 attached [2025-09-24 14:24:51.750] RTNETLINK answers: File exists [2025-09-24 14:24:51.750] ubi0:textures is mounted. [2025-09-24 14:24:51.810] ubi1:animations is mounted. [2025-09-24 14:24:51.810] ubi2:dml_code is mounted. [2025-09-24 14:24:51.810] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:24:51.810] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:24:51.810] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:24:51.810] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:24:51.810] data.LB_FadeInType0=100 [2025-09-24 14:24:51.810] data.CHLH_FadeInType0=0 [2025-09-24 14:24:51.810] data.WU_FadeInDelay=0 [2025-09-24 14:24:51.810] max_time_out=0 [2025-09-24 14:24:51.810] No splash screen [2025-09-24 14:24:51.810] stop dss Done [2025-09-24 14:24:51.810] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:24:51.902] /dev/mem opened. [2025-09-24 14:24:51.902] Memory mapped at address 0xffff88395000. [2025-09-24 14:24:51.902] Read at address 0x00600018 (0xffff88395018): 0x00000000 [2025-09-24 14:24:51.902] Write at address 0x00600018 (0xffff88395018): 0x00400040, readback 0x00400040 [2025-09-24 14:24:51.902] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:24:51.902] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:24:51.966] Loaded PowerVR consumer services. [2025-09-24 14:24:52.110] 512+0 records in [2025-09-24 14:24:52.126] 512+0 records out [2025-09-24 14:24:52.126] Waiting data available... [2025-09-24 14:24:52.158] Starting syslogd/klogd: done [2025-09-24 14:24:52.190] DML Start [2025-09-24 14:24:52.334] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:24:52.558] DML res1: 0 [2025-09-24 14:24:52.989] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:24:53.010] Read Success [2025-09-24 14:24:53.010] Verifying certificate... [2025-09-24 14:24:53.250] Verified OK [2025-09-24 14:24:53.282] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:24:54.987] Verified OK [2025-09-24 14:24:54.987] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:24:55.558] Verified OK [2025-09-24 14:24:55.558] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:24:58.276] fs.protected_hardlinks = 1 [2025-09-24 14:24:58.291] fs.protected_symlinks = 1 [2025-09-24 14:24:58.291] kernel.modules_disabled = 1 [2025-09-24 14:24:58.484] [2025-09-24 14:24:58.484] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:24:59.680] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:25:07.418] SBL1:1210.0.1.0 [2025-09-24 14:25:07.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:25:09.032] SBL2:1210.0.1.0 [2025-09-24 14:25:09.080] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:25:09.175] j-A [2025-09-24 14:25:16.530] The R5 Autosar Classic is running [2025-09-24 14:25:16.553] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:25:16.554] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:25:17.160] INIT: version 2.96 booting [2025-09-24 14:25:17.273] INIT: Entering runlevel: 5 [2025-09-24 14:25:17.433] mtd32 attached [2025-09-24 14:25:17.449] mtd24 attached [2025-09-24 14:25:17.449] mtd28 attached [2025-09-24 14:25:17.513] RTNETLINK answers: File exists [2025-09-24 14:25:17.513] ubi1:textures is mounted. [2025-09-24 14:25:17.568] ubi0:dml_code is mounted. [2025-09-24 14:25:17.568] ubi2:animations is mounted. [2025-09-24 14:25:17.568] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:25:17.568] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:25:17.568] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:25:17.568] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:25:17.568] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:25:17.568] data.LB_FadeInType0=100 [2025-09-24 14:25:17.568] data.CHLH_FadeInType0=0 [2025-09-24 14:25:17.568] data.WU_FadeInDelay=0 [2025-09-24 14:25:17.568] max_time_out=0 [2025-09-24 14:25:17.568] No splash screen [2025-09-24 14:25:17.568] stop dss Done [2025-09-24 14:25:17.583] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:25:17.637] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:25:17.637] /dev/mem opened. [2025-09-24 14:25:17.637] Memory mapped at address 0xffff84e93000. [2025-09-24 14:25:17.637] Read at address 0x00600018 (0xffff84e93018): 0x00000000 [2025-09-24 14:25:17.637] Write at address 0x00600018 (0xffff84e93018): 0x00400040, readback 0x00400040 [2025-09-24 14:25:17.845] Loaded PowerVR consumer services. [2025-09-24 14:25:17.877] Waiting data available... [2025-09-24 14:25:17.893] 512+0 records in [2025-09-24 14:25:17.893] 512+0 records out [2025-09-24 14:25:17.941] Starting syslogd/klogd: done [2025-09-24 14:25:17.957] DML Start [2025-09-24 14:25:18.101] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:25:18.277] DML res1: 0 [2025-09-24 14:25:18.867] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:25:18.867] Read Success [2025-09-24 14:25:18.867] Verifying certificate... [2025-09-24 14:25:19.123] Verified OK [2025-09-24 14:25:19.155] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:25:20.768] Verified OK [2025-09-24 14:25:20.768] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:25:21.341] Verified OK [2025-09-24 14:25:21.341] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:25:23.915] fs.protected_hardlinks = 1 [2025-09-24 14:25:23.915] fs.protected_symlinks = 1 [2025-09-24 14:25:23.931] kernel.modules_disabled = 1 [2025-09-24 14:25:24.123] [2025-09-24 14:25:24.123] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:25:25.461] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:25:33.162] SBL1:1210.0.1.0 [2025-09-24 14:25:33.193] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:25:34.776] SBL2:1210.0.1.0 [2025-09-24 14:25:34.808] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:25:34.920] j-A [2025-09-24 14:25:42.258] The R5 Autosar Classic is running [2025-09-24 14:25:42.283] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:25:42.283] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:25:42.890] INIT: version 2.96 booting [2025-09-24 14:25:43.002] INIT: Entering runlevel: 5 [2025-09-24 14:25:43.162] mtd32 attached [2025-09-24 14:25:43.162] mtd24 attached [2025-09-24 14:25:43.178] mtd28 attached [2025-09-24 14:25:43.226] RTNETLINK answers: File exists [2025-09-24 14:25:43.226] ubi0:dml_code is mounted. [2025-09-24 14:25:43.265] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:25:43.265] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:25:43.265] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:25:43.265] ubi1:textures is mounted. [2025-09-24 14:25:43.265] ubi2:animations is mounted. [2025-09-24 14:25:43.265] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:25:43.265] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:25:43.287] data.LB_FadeInType0=100 [2025-09-24 14:25:43.287] data.CHLH_FadeInType0=0 [2025-09-24 14:25:43.287] data.WU_FadeInDelay=0 [2025-09-24 14:25:43.287] max_time_out=0 [2025-09-24 14:25:43.287] No splash screen [2025-09-24 14:25:43.287] stop dss Done [2025-09-24 14:25:43.319] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:25:43.360] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:25:43.360] /dev/mem opened. [2025-09-24 14:25:43.360] Memory mapped at address 0xffffb8a23000. [2025-09-24 14:25:43.360] Read at address 0x00600018 (0xffffb8a23018): 0x00000000 [2025-09-24 14:25:43.360] Write at address 0x00600018 (0xffffb8a23018): 0x00400040, readback 0x00400040 [2025-09-24 14:25:43.568] Loaded PowerVR consumer services. [2025-09-24 14:25:43.627] Waiting data available... [2025-09-24 14:25:43.627] 512+0 records in [2025-09-24 14:25:43.627] 512+0 records out [2025-09-24 14:25:43.659] Starting syslogd/klogd: done [2025-09-24 14:25:43.675] DML Start [2025-09-24 14:25:43.850] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:25:44.107] DML res1: 0 [2025-09-24 14:25:44.531] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:25:44.531] Read Success [2025-09-24 14:25:44.531] Verifying certificate... [2025-09-24 14:25:44.755] Verified OK [2025-09-24 14:25:44.771] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:25:46.552] Verified OK [2025-09-24 14:25:46.552] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:25:47.076] Verified OK [2025-09-24 14:25:47.076] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:25:49.586] fs.protected_hardlinks = 1 [2025-09-24 14:25:49.586] fs.protected_symlinks = 1 [2025-09-24 14:25:49.602] kernel.modules_disabled = 1 [2025-09-24 14:25:49.794] [2025-09-24 14:25:49.794] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:25:51.163] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:25:58.891] SBL1:1210.0.1.0 [2025-09-24 14:25:58.923] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:26:00.506] SBL2:1210.0.1.0 [2025-09-24 14:26:00.538] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:26:00.650] j-A [2025-09-24 14:26:08.021] The R5 Autosar Classic is running [2025-09-24 14:26:08.021] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:26:08.021] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:26:08.629] INIT: version 2.96 booting [2025-09-24 14:26:08.740] INIT: Entering runlevel: 5 [2025-09-24 14:26:08.901] mtd32 attached [2025-09-24 14:26:08.917] mtd28 attached [2025-09-24 14:26:08.917] mtd24 attached [2025-09-24 14:26:08.965] ubi0:dml_code is mounted. [2025-09-24 14:26:09.040] RTNETLINK answers: File exists [2025-09-24 14:26:09.040] ubi1:animations is mounted. [2025-09-24 14:26:09.040] ubi2:textures is mounted. [2025-09-24 14:26:09.040] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:26:09.040] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:26:09.040] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:26:09.040] data.LB_FadeInType0=100 [2025-09-24 14:26:09.040] data.CHLH_FadeInType0=0 [2025-09-24 14:26:09.040] data.WU_FadeInDelay=0 [2025-09-24 14:26:09.040] max_time_out=0 [2025-09-24 14:26:09.040] No splash screen [2025-09-24 14:26:09.040] stop dss Done [2025-09-24 14:26:09.040] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:26:09.040] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:26:09.107] /dev/mem opened. [2025-09-24 14:26:09.107] Memory mapped at address 0xffffa19bc000. [2025-09-24 14:26:09.107] Read at address 0x00600018 (0xffffa19bc018): 0x00000000 [2025-09-24 14:26:09.107] Write at address 0x00600018 (0xffffa19bc018): 0x00400040, readback 0x00400040 [2025-09-24 14:26:09.123] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:26:09.123] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:26:09.251] Loaded PowerVR consumer services. [2025-09-24 14:26:09.372] Waiting data available... [2025-09-24 14:26:09.372] 512+0 records in [2025-09-24 14:26:09.372] 512+0 records out [2025-09-24 14:26:09.388] Starting syslogd/klogd: done [2025-09-24 14:26:09.404] DML Start [2025-09-24 14:26:09.612] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:26:09.852] DML res1: 0 [2025-09-24 14:26:10.232] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:26:10.232] Read Success [2025-09-24 14:26:10.232] Verifying certificate... [2025-09-24 14:26:10.488] Verified OK [2025-09-24 14:26:10.504] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:26:12.102] Verified OK [2025-09-24 14:26:12.102] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:26:12.684] Verified OK [2025-09-24 14:26:12.684] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:26:15.386] fs.protected_hardlinks = 1 [2025-09-24 14:26:15.402] fs.protected_symlinks = 1 [2025-09-24 14:26:15.402] kernel.modules_disabled = 1 [2025-09-24 14:26:15.593] [2025-09-24 14:26:15.593] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:26:16.930] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:26:24.613] SBL1:1210.0.1.0 [2025-09-24 14:26:24.661] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:26:26.228] SBL2:1210.0.1.0 [2025-09-24 14:26:26.276] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:26:26.372] j-A [2025-09-24 14:26:33.727] The R5 Autosar Classic is running [2025-09-24 14:26:33.752] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:26:33.752] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:26:34.360] INIT: version 2.96 booting [2025-09-24 14:26:34.471] INIT: Entering runlevel: 5 [2025-09-24 14:26:34.632] mtd28 attached [2025-09-24 14:26:34.632] mtd24 attached [2025-09-24 14:26:34.647] mtd32 attached [2025-09-24 14:26:34.663] ubi0:animations is mounted. [2025-09-24 14:26:34.695] RTNETLINK answers: File exists [2025-09-24 14:26:34.737] ubi1:textures is mounted. [2025-09-24 14:26:34.737] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:26:34.737] ubi2:dml_code is mounted. [2025-09-24 14:26:34.737] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:26:34.737] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:26:34.737] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:26:34.737] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:26:34.737] data.LB_FadeInType0=100 [2025-09-24 14:26:34.758] data.CHLH_FadeInType0=0 [2025-09-24 14:26:34.758] data.WU_FadeInDelay=0 [2025-09-24 14:26:34.758] max_time_out=0 [2025-09-24 14:26:34.758] No splash screen [2025-09-24 14:26:34.758] stop dss Done [2025-09-24 14:26:34.790] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:26:34.806] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:26:34.839] /dev/mem opened. [2025-09-24 14:26:34.839] Memory mapped at address 0xffffa1f13000. [2025-09-24 14:26:34.839] Read at address 0x00600018 (0xffffa1f13018): 0x00000000 [2025-09-24 14:26:34.839] Write at address 0x00600018 (0xffffa1f13018): 0x00400040, readback 0x00400040 [2025-09-24 14:26:34.967] Loaded PowerVR consumer services. [2025-09-24 14:26:35.090] Waiting data available... [2025-09-24 14:26:35.090] 512+0 records in [2025-09-24 14:26:35.090] 512+0 records out [2025-09-24 14:26:35.121] Starting syslogd/klogd: done [2025-09-24 14:26:35.137] DML Start [2025-09-24 14:26:35.298] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:26:35.522] DML res1: 0 [2025-09-24 14:26:35.984] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:26:35.984] Read Success [2025-09-24 14:26:35.984] Verifying certificate... [2025-09-24 14:26:36.256] Verified OK [2025-09-24 14:26:36.272] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:26:37.886] Verified OK [2025-09-24 14:26:37.886] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:26:38.510] Verified OK [2025-09-24 14:26:38.526] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:26:41.195] fs.protected_hardlinks = 1 [2025-09-24 14:26:41.195] fs.protected_symlinks = 1 [2025-09-24 14:26:41.211] kernel.modules_disabled = 1 [2025-09-24 14:26:41.404] [2025-09-24 14:26:41.404] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:26:42.634] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:26:50.360] SBL1:1210.0.1.0 [2025-09-24 14:26:50.392] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:26:51.975] SBL2:1210.0.1.0 [2025-09-24 14:26:52.006] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:26:52.118] j-A [2025-09-24 14:26:59.457] The R5 Autosar Classic is running [2025-09-24 14:26:59.488] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:26:59.488] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:27:00.095] INIT: version 2.96 booting [2025-09-24 14:27:00.207] INIT: Entering runlevel: 5 [2025-09-24 14:27:00.367] mtd32 attached [2025-09-24 14:27:00.367] mtd24 attached [2025-09-24 14:27:00.399] mtd28 attached [2025-09-24 14:27:00.399] ubi0:dml_code is mounted. [2025-09-24 14:27:00.431] ubi1:textures is mounted. [2025-09-24 14:27:00.499] RTNETLINK answers: File exists [2025-09-24 14:27:00.499] ubi2:animations is mounted. [2025-09-24 14:27:00.499] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:27:00.499] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:27:00.499] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:27:00.499] data.LB_FadeInType0=100 [2025-09-24 14:27:00.499] data.CHLH_FadeInType0=0 [2025-09-24 14:27:00.499] data.WU_FadeInDelay=0 [2025-09-24 14:27:00.499] max_time_out=0 [2025-09-24 14:27:00.499] No splash screen [2025-09-24 14:27:00.499] stop dss Done [2025-09-24 14:27:00.499] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:27:00.499] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:27:00.531] /dev/mem opened. [2025-09-24 14:27:00.531] Memory mapped at address 0xffff88514000. [2025-09-24 14:27:00.557] Read at address 0x00600018 (0xffff88514018): 0x00000000 [2025-09-24 14:27:00.557] Write at address 0x00600018 (0xffff88514018): 0x00400040, readback 0x00400040 [2025-09-24 14:27:00.573] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:27:00.589] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:27:00.797] Loaded PowerVR consumer services. [2025-09-24 14:27:00.813] Waiting data available... [2025-09-24 14:27:00.829] 512+0 records in [2025-09-24 14:27:00.845] 512+0 records out [2025-09-24 14:27:00.877] Starting syslogd/klogd: done [2025-09-24 14:27:00.893] DML Start [2025-09-24 14:27:01.036] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:27:01.277] DML res1: 0 [2025-09-24 14:27:01.785] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:27:01.785] Read Success [2025-09-24 14:27:01.785] Verifying certificate... [2025-09-24 14:27:01.992] Verified OK [2025-09-24 14:27:02.008] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:27:03.719] Verified OK [2025-09-24 14:27:03.719] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:27:04.240] Verified OK [2025-09-24 14:27:04.240] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:27:06.719] fs.protected_hardlinks = 1 [2025-09-24 14:27:06.719] fs.protected_symlinks = 1 [2025-09-24 14:27:06.734] kernel.modules_disabled = 1 [2025-09-24 14:27:06.942] [2025-09-24 14:27:06.942] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:27:08.379] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:27:16.077] SBL1:1210.0.1.0 [2025-09-24 14:27:16.125] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:27:17.693] SBL2:1210.0.1.0 [2025-09-24 14:27:17.724] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:27:17.837] j-A [2025-09-24 14:27:25.192] The R5 Autosar Classic is running [2025-09-24 14:27:25.192] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:27:25.213] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:27:25.821] INIT: version 2.96 booting [2025-09-24 14:27:25.932] INIT: Entering runlevel: 5 [2025-09-24 14:27:26.076] mtd24 attached [2025-09-24 14:27:26.092] mtd28 attached [2025-09-24 14:27:26.108] mtd32 attached [2025-09-24 14:27:26.140] ubi0:textures is mounted. [2025-09-24 14:27:26.156] RTNETLINK answers: File exists [2025-09-24 14:27:26.211] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:27:26.211] ubi1:animations is mounted. [2025-09-24 14:27:26.211] ubi2:dml_code is mounted. [2025-09-24 14:27:26.211] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:27:26.211] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:27:26.211] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:27:26.211] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:27:26.211] data.LB_FadeInType0=100 [2025-09-24 14:27:26.211] data.CHLH_FadeInType0=0 [2025-09-24 14:27:26.211] data.WU_FadeInDelay=0 [2025-09-24 14:27:26.211] max_time_out=0 [2025-09-24 14:27:26.211] No splash screen [2025-09-24 14:27:26.211] stop dss Done [2025-09-24 14:27:26.277] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:27:26.277] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:27:26.277] /dev/mem opened. [2025-09-24 14:27:26.277] Memory mapped at address 0xffffb5085000. [2025-09-24 14:27:26.277] Read at address 0x00600018 (0xffffb5085018): 0x00000000 [2025-09-24 14:27:26.277] Write at address 0x00600018 (0xffffb5085018): 0x00400040, readback 0x00400040 [2025-09-24 14:27:26.437] Loaded PowerVR consumer services. [2025-09-24 14:27:26.533] Waiting data available... [2025-09-24 14:27:26.549] 512+0 records in [2025-09-24 14:27:26.549] 512+0 records out [2025-09-24 14:27:26.597] Starting syslogd/klogd: done [2025-09-24 14:27:26.613] DML Start [2025-09-24 14:27:26.788] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:27:26.981] DML res1: 0 [2025-09-24 14:27:27.449] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:27:27.449] Read Success [2025-09-24 14:27:27.449] Verifying certificate... [2025-09-24 14:27:27.673] Verified OK [2025-09-24 14:27:27.689] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:27:29.368] Verified OK [2025-09-24 14:27:29.368] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:27:29.984] Verified OK [2025-09-24 14:27:29.984] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:27:32.621] fs.protected_hardlinks = 1 [2025-09-24 14:27:32.650] fs.protected_symlinks = 1 [2025-09-24 14:27:32.650] kernel.modules_disabled = 1 [2025-09-24 14:27:32.843] [2025-09-24 14:27:32.843] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:27:34.046] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:27:41.807] SBL1:1210.0.1.0 [2025-09-24 14:27:41.855] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:27:43.421] SBL2:1210.0.1.0 [2025-09-24 14:27:43.469] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:27:43.565] j-A [2025-09-24 14:27:50.920] The R5 Autosar Classic is running [2025-09-24 14:27:50.944] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:27:50.944] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:27:51.551] INIT: version 2.96 booting [2025-09-24 14:27:51.664] INIT: Entering runlevel: 5 [2025-09-24 14:27:51.823] mtd32 attached [2025-09-24 14:27:51.823] mtd28 attached [2025-09-24 14:27:51.839] mtd24 attached [2025-09-24 14:27:51.887] RTNETLINK answers: File exists [2025-09-24 14:27:51.929] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:27:51.929] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:27:51.929] ubi1:animations is mounted. [2025-09-24 14:27:51.929] ubi2:textures is mounted. [2025-09-24 14:27:51.929] ubi0:dml_code is mounted. [2025-09-24 14:27:51.929] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:27:51.929] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:27:51.929] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:27:51.929] data.LB_FadeInType0=100 [2025-09-24 14:27:51.950] data.CHLH_FadeInType0=0 [2025-09-24 14:27:51.950] data.WU_FadeInDelay=0 [2025-09-24 14:27:51.950] max_time_out=0 [2025-09-24 14:27:51.950] No splash screen [2025-09-24 14:27:51.950] stop dss Done [2025-09-24 14:27:51.997] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:27:51.997] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:27:51.997] /dev/mem opened. [2025-09-24 14:27:52.028] Memory mapped at address 0xffffb040b000. [2025-09-24 14:27:52.029] Read at address 0x00600018 (0xffffb040b018): 0x00000000 [2025-09-24 14:27:52.029] Write at address 0x00600018 (0xffffb040b018): 0x00400040, readback 0x00400040 [2025-09-24 14:27:52.140] Loaded PowerVR consumer services. [2025-09-24 14:27:52.281] 512+0 records in [2025-09-24 14:27:52.281] 512+0 records out [2025-09-24 14:27:52.281] Waiting data available... [2025-09-24 14:27:52.312] Starting syslogd/klogd: done [2025-09-24 14:27:52.328] DML Start [2025-09-24 14:27:52.505] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:27:52.713] DML res1: 0 [2025-09-24 14:27:53.174] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:27:53.174] Read Success [2025-09-24 14:27:53.174] Verifying certificate... [2025-09-24 14:27:53.430] Verified OK [2025-09-24 14:27:53.445] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:27:55.204] Verified OK [2025-09-24 14:27:55.220] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:27:55.773] Verified OK [2025-09-24 14:27:55.773] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:27:58.268] fs.protected_hardlinks = 1 [2025-09-24 14:27:58.295] fs.protected_symlinks = 1 [2025-09-24 14:27:58.295] kernel.modules_disabled = 1 [2025-09-24 14:27:58.470] [2025-09-24 14:27:58.470] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:27:59.857] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:28:07.538] SBL1:1210.0.1.0 [2025-09-24 14:28:07.585] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:28:09.152] SBL2:1210.0.1.0 [2025-09-24 14:28:09.184] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:28:09.295] j-A [2025-09-24 14:28:16.671] The R5 Autosar Classic is running [2025-09-24 14:28:16.671] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:28:16.671] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:28:17.278] INIT: version 2.96 booting [2025-09-24 14:28:17.391] INIT: Entering runlevel: 5 [2025-09-24 14:28:17.534] mtd24 attached [2025-09-24 14:28:17.550] mtd28 attached [2025-09-24 14:28:17.566] mtd32 attached [2025-09-24 14:28:17.646] RTNETLINK answers: File exists [2025-09-24 14:28:17.646] ubi1:animations is mounted. [2025-09-24 14:28:17.646] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:28:17.646] ubi0:textures is mounted. [2025-09-24 14:28:17.646] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:28:17.646] ubi2:dml_code is mounted. [2025-09-24 14:28:17.646] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:28:17.646] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:28:17.646] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:28:17.668] data.LB_FadeInType0=100 [2025-09-24 14:28:17.668] data.CHLH_FadeInType0=0 [2025-09-24 14:28:17.668] data.WU_FadeInDelay=0 [2025-09-24 14:28:17.668] max_time_out=0 [2025-09-24 14:28:17.668] No splash screen [2025-09-24 14:28:17.668] stop dss Done [2025-09-24 14:28:17.759] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:28:17.759] /dev/mem opened. [2025-09-24 14:28:17.759] Memory mapped at address 0xffffb90b6000. [2025-09-24 14:28:17.759] Read at address 0x00600018 (0xffffb90b6018): 0x00000000 [2025-09-24 14:28:17.759] Write at address 0x00600018 (0xffffb90b6018): 0x00400040, readback 0x00400040 [2025-09-24 14:28:17.759] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:28:17.935] Loaded PowerVR consumer services. [2025-09-24 14:28:17.992] 512+0 records in [2025-09-24 14:28:17.992] 512+0 records out [2025-09-24 14:28:17.992] Waiting data available... [2025-09-24 14:28:18.024] Starting syslogd/klogd: done [2025-09-24 14:28:18.056] DML Start [2025-09-24 14:28:18.217] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:28:18.441] DML res1: 0 [2025-09-24 14:28:18.967] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:28:18.967] Read Success [2025-09-24 14:28:18.967] Verifying certificate... [2025-09-24 14:28:19.191] Verified OK [2025-09-24 14:28:19.207] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:28:20.928] Verified OK [2025-09-24 14:28:20.928] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:28:21.512] Verified OK [2025-09-24 14:28:21.512] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:28:24.006] fs.protected_hardlinks = 1 [2025-09-24 14:28:24.037] fs.protected_symlinks = 1 [2025-09-24 14:28:24.037] kernel.modules_disabled = 1 [2025-09-24 14:28:24.229] [2025-09-24 14:28:24.229] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:28:25.523] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:28:33.255] SBL1:1210.0.1.0 [2025-09-24 14:28:33.303] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:28:34.869] SBL2:1210.0.1.0 [2025-09-24 14:28:34.917] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:28:35.013] j-A [2025-09-24 14:28:42.367] The R5 Autosar Classic is running [2025-09-24 14:28:42.390] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:28:42.390] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:28:42.998] INIT: version 2.96 booting [2025-09-24 14:28:43.110] INIT: Entering runlevel: 5 [2025-09-24 14:28:43.270] mtd24 attached [2025-09-24 14:28:43.270] mtd28 attached [2025-09-24 14:28:43.302] mtd32 attached [2025-09-24 14:28:43.391] RTNETLINK answers: File exists [2025-09-24 14:28:43.391] ubi0:textures is mounted. [2025-09-24 14:28:43.391] ubi1:animations is mounted. [2025-09-24 14:28:43.391] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:28:43.391] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:28:43.391] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:28:43.391] ubi2:dml_code is mounted. [2025-09-24 14:28:43.391] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:28:43.391] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:28:43.391] data.LB_FadeInType0=100 [2025-09-24 14:28:43.391] data.CHLH_FadeInType0=0 [2025-09-24 14:28:43.391] data.WU_FadeInDelay=0 [2025-09-24 14:28:43.391] max_time_out=0 [2025-09-24 14:28:43.391] No splash screen [2025-09-24 14:28:43.391] stop dss Done [2025-09-24 14:28:43.472] /dev/mem opened. [2025-09-24 14:28:43.472] Memory mapped at address 0xffffb1d6d000. [2025-09-24 14:28:43.472] Read at address 0x00600018 (0xffffb1d6d018): 0x00000000 [2025-09-24 14:28:43.472] Write at address 0x00600018 (0xffffb1d6d018): 0x00400040, readback 0x00400040 [2025-09-24 14:28:43.472] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:28:43.472] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:28:43.600] Loaded PowerVR consumer services. [2025-09-24 14:28:43.727] Waiting data available... [2025-09-24 14:28:43.727] 512+0 records in [2025-09-24 14:28:43.727] 512+0 records out [2025-09-24 14:28:43.759] Starting syslogd/klogd: done [2025-09-24 14:28:43.791] DML Start [2025-09-24 14:28:43.966] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:28:44.191] DML res1: 0 [2025-09-24 14:28:44.649] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:28:44.649] Read Success [2025-09-24 14:28:44.649] Verifying certificate... [2025-09-24 14:28:44.952] Verified OK [2025-09-24 14:28:44.984] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:28:46.807] Verified OK [2025-09-24 14:28:46.807] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:28:47.334] Verified OK [2025-09-24 14:28:47.334] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:28:49.732] fs.protected_hardlinks = 1 [2025-09-24 14:28:49.748] fs.protected_symlinks = 1 [2025-09-24 14:28:49.748] kernel.modules_disabled = 1 [2025-09-24 14:28:49.941] [2025-09-24 14:28:49.941] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:28:51.272] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:28:58.986] SBL1:1210.0.1.0 [2025-09-24 14:28:59.034] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:29:00.602] SBL2:1210.0.1.0 [2025-09-24 14:29:00.650] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:29:00.746] j-A [2025-09-24 14:29:08.099] The R5 Autosar Classic is running [2025-09-24 14:29:08.124] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:29:08.124] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:29:08.732] INIT: version 2.96 booting [2025-09-24 14:29:08.844] INIT: Entering runlevel: 5 [2025-09-24 14:29:09.003] mtd32 attached [2025-09-24 14:29:09.003] mtd28 attached [2025-09-24 14:29:09.019] mtd24 attached [2025-09-24 14:29:09.051] ubi0:dml_code is mounted. [2025-09-24 14:29:09.067] ubi2:textures is mounted. [2025-09-24 14:29:09.067] RTNETLINK answers: File exists [2025-09-24 14:29:09.123] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:29:09.123] ubi1:animations is mounted. [2025-09-24 14:29:09.123] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:29:09.123] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:29:09.123] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:29:09.123] data.LB_FadeInType0=100 [2025-09-24 14:29:09.123] data.CHLH_FadeInType0=0 [2025-09-24 14:29:09.123] data.WU_FadeInDelay=0 [2025-09-24 14:29:09.123] max_time_out=0 [2025-09-24 14:29:09.123] No splash screen [2025-09-24 14:29:09.123] stop dss Done [2025-09-24 14:29:09.123] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:29:09.197] /dev/mem opened. [2025-09-24 14:29:09.197] Memory mapped at address 0xffff88714000. [2025-09-24 14:29:09.197] Read at address 0x00600018 (0xffff88714018): 0x00000000 [2025-09-24 14:29:09.197] Write at address 0x00600018 (0xffff88714018): 0x00400040, readback 0x00400040 [2025-09-24 14:29:09.197] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:29:09.222] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:29:09.286] Loaded PowerVR consumer services. [2025-09-24 14:29:09.430] 512+0 records in [2025-09-24 14:29:09.430] 512+0 records out [2025-09-24 14:29:09.446] Waiting data available... [2025-09-24 14:29:09.462] Starting syslogd/klogd: done [2025-09-24 14:29:09.478] DML Start [2025-09-24 14:29:09.653] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:29:09.830] DML res1: 0 [2025-09-24 14:29:10.326] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:29:10.342] Read Success [2025-09-24 14:29:10.342] Verifying certificate... [2025-09-24 14:29:10.581] Verified OK [2025-09-24 14:29:10.597] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:29:12.308] Verified OK [2025-09-24 14:29:12.308] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:29:12.927] Verified OK [2025-09-24 14:29:12.927] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:29:15.422] fs.protected_hardlinks = 1 [2025-09-24 14:29:15.438] fs.protected_symlinks = 1 [2025-09-24 14:29:15.438] kernel.modules_disabled = 1 [2025-09-24 14:29:15.630] [2025-09-24 14:29:15.630] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:29:16.957] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:29:24.724] SBL1:1210.0.1.0 [2025-09-24 14:29:24.756] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:29:26.339] SBL2:1210.0.1.0 [2025-09-24 14:29:26.371] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:29:26.482] j-A [2025-09-24 14:29:33.854] The R5 Autosar Classic is running [2025-09-24 14:29:33.854] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:29:33.854] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:29:34.461] INIT: version 2.96 booting [2025-09-24 14:29:34.558] INIT: Entering runlevel: 5 [2025-09-24 14:29:34.717] mtd28 attached [2025-09-24 14:29:34.733] mtd24 attached [2025-09-24 14:29:34.749] mtd32 attached [2025-09-24 14:29:34.781] ubi0:animations is mounted. [2025-09-24 14:29:34.797] RTNETLINK answers: File exists [2025-09-24 14:29:34.852] ubi1:textures is mounted. [2025-09-24 14:29:34.852] ubi2:dml_code is mounted. [2025-09-24 14:29:34.852] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:29:34.852] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:29:34.852] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:29:34.852] data.LB_FadeInType0=100 [2025-09-24 14:29:34.852] data.CHLH_FadeInType0=0 [2025-09-24 14:29:34.852] data.WU_FadeInDelay=0 [2025-09-24 14:29:34.852] max_time_out=0 [2025-09-24 14:29:34.852] No splash screen [2025-09-24 14:29:34.852] stop dss Done [2025-09-24 14:29:34.852] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:29:34.852] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:29:34.920] /dev/mem opened. [2025-09-24 14:29:34.920] Memory mapped at address 0xffff9d381000. [2025-09-24 14:29:34.920] Read at address 0x00600018 (0xffff9d381018): 0x00000000 [2025-09-24 14:29:34.920] Write at address 0x00600018 (0xffff9d381018): 0x00400040, readback 0x00400040 [2025-09-24 14:29:34.936] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:29:34.936] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:29:35.064] Loaded PowerVR consumer services. [2025-09-24 14:29:35.187] Waiting data available... [2025-09-24 14:29:35.187] 512+0 records in [2025-09-24 14:29:35.187] 512+0 records out [2025-09-24 14:29:35.203] Starting syslogd/klogd: done [2025-09-24 14:29:35.219] DML Start [2025-09-24 14:29:35.395] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:29:35.634] DML res1: 0 [2025-09-24 14:29:36.035] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:29:36.056] Read Success [2025-09-24 14:29:36.056] Verifying certificate... [2025-09-24 14:29:36.295] Verified OK [2025-09-24 14:29:36.295] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:29:37.922] Verified OK [2025-09-24 14:29:37.922] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:29:38.503] Verified OK [2025-09-24 14:29:38.503] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:29:41.221] fs.protected_hardlinks = 1 [2025-09-24 14:29:41.237] fs.protected_symlinks = 1 [2025-09-24 14:29:41.237] kernel.modules_disabled = 1 [2025-09-24 14:29:41.430] [2025-09-24 14:29:41.430] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:29:42.724] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:29:50.464] SBL1:1210.0.1.0 [2025-09-24 14:29:50.512] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:29:52.079] SBL2:1210.0.1.0 [2025-09-24 14:29:52.110] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:29:52.222] j-A [2025-09-24 14:29:59.576] The R5 Autosar Classic is running [2025-09-24 14:29:59.576] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:29:59.596] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:30:00.204] INIT: version 2.96 booting [2025-09-24 14:30:00.316] INIT: Entering runlevel: 5 [2025-09-24 14:30:00.476] mtd32 attached [2025-09-24 14:30:00.492] mtd28 attached [2025-09-24 14:30:00.492] mtd24 attached [2025-09-24 14:30:00.540] RTNETLINK answers: File exists [2025-09-24 14:30:00.582] ubi1:animations is mounted. [2025-09-24 14:30:00.582] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:30:00.582] ubi0:dml_code is mounted. [2025-09-24 14:30:00.582] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:30:00.582] ubi2:textures is mounted. [2025-09-24 14:30:00.582] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:30:00.582] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:30:00.610] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:30:00.610] data.LB_FadeInType0=100 [2025-09-24 14:30:00.610] data.CHLH_FadeInType0=0 [2025-09-24 14:30:00.610] data.WU_FadeInDelay=0 [2025-09-24 14:30:00.610] max_time_out=0 [2025-09-24 14:30:00.610] No splash screen [2025-09-24 14:30:00.610] stop dss Done [2025-09-24 14:30:00.642] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:30:00.681] /dev/mem opened. [2025-09-24 14:30:00.681] Memory mapped at address 0xffff876fb000. [2025-09-24 14:30:00.681] Read at address 0x00600018 (0xffff876fb018): 0x00000000 [2025-09-24 14:30:00.681] Write at address 0x00600018 (0xffff876fb018): 0x00400040, readback 0x00400040 [2025-09-24 14:30:00.681] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:30:00.873] Loaded PowerVR consumer services. [2025-09-24 14:30:00.937] Waiting data available... [2025-09-24 14:30:00.953] 512+0 records in [2025-09-24 14:30:00.953] 512+0 records out [2025-09-24 14:30:01.001] Starting syslogd/klogd: done [2025-09-24 14:30:01.016] DML Start [2025-09-24 14:30:01.160] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:30:01.384] DML res1: 0 [2025-09-24 14:30:01.880] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:30:01.880] Read Success [2025-09-24 14:30:01.896] Verifying certificate... [2025-09-24 14:30:02.120] Verified OK [2025-09-24 14:30:02.120] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:30:03.767] Verified OK [2025-09-24 14:30:03.767] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:30:04.481] Verified OK [2025-09-24 14:30:04.481] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:30:07.119] fs.protected_hardlinks = 1 [2025-09-24 14:30:07.119] fs.protected_symlinks = 1 [2025-09-24 14:30:07.135] kernel.modules_disabled = 1 [2025-09-24 14:30:07.327] [2025-09-24 14:30:07.327] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:30:08.485] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:30:16.199] SBL1:1210.0.1.0 [2025-09-24 14:30:16.247] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:30:17.814] SBL2:1210.0.1.0 [2025-09-24 14:30:17.862] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:30:17.957] j-A [2025-09-24 14:30:25.311] The R5 Autosar Classic is running [2025-09-24 14:30:25.334] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:30:25.334] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:30:25.941] INIT: version 2.96 booting [2025-09-24 14:30:26.053] INIT: Entering runlevel: 5 [2025-09-24 14:30:26.214] mtd24 attached [2025-09-24 14:30:26.214] mtd28 attached [2025-09-24 14:30:26.229] mtd32 attached [2025-09-24 14:30:26.277] ubi0:textures is mounted. [2025-09-24 14:30:26.293] RTNETLINK answers: File exists [2025-09-24 14:30:26.293] ubi1:animations is mounted. [2025-09-24 14:30:26.346] ubi2:dml_code is mounted. [2025-09-24 14:30:26.346] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:30:26.346] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:30:26.346] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:30:26.346] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:30:26.346] data.LB_FadeInType0=100 [2025-09-24 14:30:26.346] data.CHLH_FadeInType0=0 [2025-09-24 14:30:26.346] data.WU_FadeInDelay=0 [2025-09-24 14:30:26.346] max_time_out=0 [2025-09-24 14:30:26.346] No splash screen [2025-09-24 14:30:26.346] stop dss Done [2025-09-24 14:30:26.346] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:30:26.417] /dev/mem opened. [2025-09-24 14:30:26.417] Memory mapped at address 0xffffbc215000. [2025-09-24 14:30:26.417] Read at address 0x00600018 (0xffffbc215018): 0x00000000 [2025-09-24 14:30:26.417] Write at address 0x00600018 (0xffffbc215018): 0x00400040, readback 0x00400040 [2025-09-24 14:30:26.417] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:30:26.417] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:30:26.545] Loaded PowerVR consumer services. [2025-09-24 14:30:26.673] Waiting data available... [2025-09-24 14:30:26.688] 512+0 records in [2025-09-24 14:30:26.688] 512+0 records out [2025-09-24 14:30:26.720] Starting syslogd/klogd: done [2025-09-24 14:30:26.752] DML Start [2025-09-24 14:30:26.897] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:30:27.088] DML res1: 0 [2025-09-24 14:30:27.600] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:30:27.600] Read Success [2025-09-24 14:30:27.616] Verifying certificate... [2025-09-24 14:30:27.840] Verified OK [2025-09-24 14:30:27.856] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:30:29.694] Verified OK [2025-09-24 14:30:29.694] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:30:30.261] Verified OK [2025-09-24 14:30:30.261] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:30:32.691] fs.protected_hardlinks = 1 [2025-09-24 14:30:32.707] fs.protected_symlinks = 1 [2025-09-24 14:30:32.707] kernel.modules_disabled = 1 [2025-09-24 14:30:32.899] [2025-09-24 14:30:32.899] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:30:34.191] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:30:41.931] SBL1:1210.0.1.0 [2025-09-24 14:30:41.979] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:30:43.545] SBL2:1210.0.1.0 [2025-09-24 14:30:43.593] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:30:43.690] j-A [2025-09-24 14:30:51.042] The R5 Autosar Classic is running [2025-09-24 14:30:51.064] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:30:51.064] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:30:51.671] INIT: version 2.96 booting [2025-09-24 14:30:51.784] INIT: Entering runlevel: 5 [2025-09-24 14:30:51.943] mtd24 attached [2025-09-24 14:30:51.943] mtd28 attached [2025-09-24 14:30:51.959] mtd32 attached [2025-09-24 14:30:52.007] ubi0:textures is mounted. [2025-09-24 14:30:52.007] RTNETLINK answers: File exists [2025-09-24 14:30:52.040] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:30:52.040] ubi1:animations is mounted. [2025-09-24 14:30:52.040] ubi2:dml_code is mounted. [2025-09-24 14:30:52.040] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:30:52.040] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:30:52.040] data.LB_FadeInType0=100 [2025-09-24 14:30:52.066] data.CHLH_FadeInType0=0 [2025-09-24 14:30:52.066] data.WU_FadeInDelay=0 [2025-09-24 14:30:52.066] max_time_out=0 [2025-09-24 14:30:52.066] No splash screen [2025-09-24 14:30:52.066] stop dss Done [2025-09-24 14:30:52.066] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:30:52.066] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:30:52.151] /dev/mem opened. [2025-09-24 14:30:52.151] Memory mapped at address 0xffffbee4f000. [2025-09-24 14:30:52.151] Read at address 0x00600018 (0xffffbee4f018): 0x00000000 [2025-09-24 14:30:52.151] Write at address 0x00600018 (0xffffbee4f018): 0x00400040, readback 0x00400040 [2025-09-24 14:30:52.167] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:30:52.183] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:30:52.343] Loaded PowerVR consumer services. [2025-09-24 14:30:52.391] Waiting data available... [2025-09-24 14:30:52.406] 512+0 records in [2025-09-24 14:30:52.406] 512+0 records out [2025-09-24 14:30:52.454] Starting syslogd/klogd: done [2025-09-24 14:30:52.486] DML Start [2025-09-24 14:30:52.647] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:30:52.870] DML res1: 0 [2025-09-24 14:30:53.270] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:30:53.291] Read Success [2025-09-24 14:30:53.291] Verifying certificate... [2025-09-24 14:30:53.563] Verified OK [2025-09-24 14:30:53.579] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:30:55.074] Verified OK [2025-09-24 14:30:55.074] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:30:55.742] Verified OK [2025-09-24 14:30:55.742] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:30:58.588] fs.protected_hardlinks = 1 [2025-09-24 14:30:58.588] fs.protected_symlinks = 1 [2025-09-24 14:30:58.604] kernel.modules_disabled = 1 [2025-09-24 14:30:58.779] [2025-09-24 14:30:58.779] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:30:59.978] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:31:07.714] SBL1:1210.0.1.0 [2025-09-24 14:31:07.762] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:31:09.329] SBL2:1210.0.1.0 [2025-09-24 14:31:09.360] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:31:09.472] j-A [2025-09-24 14:31:16.847] The R5 Autosar Classic is running [2025-09-24 14:31:16.847] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:31:16.847] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:31:17.454] INIT: version 2.96 booting [2025-09-24 14:31:17.566] INIT: Entering runlevel: 5 [2025-09-24 14:31:17.710] mtd24 attached [2025-09-24 14:31:17.726] mtd28 attached [2025-09-24 14:31:17.742] mtd32 attached [2025-09-24 14:31:17.790] RTNETLINK answers: File exists [2025-09-24 14:31:17.790] ubi0:textures is mounted. [2025-09-24 14:31:17.827] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:31:17.827] ubi1:animations is mounted. [2025-09-24 14:31:17.827] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:31:17.827] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:31:17.827] ubi2:dml_code is mounted. [2025-09-24 14:31:17.827] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:31:17.827] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:31:17.843] data.LB_FadeInType0=100 [2025-09-24 14:31:17.843] data.CHLH_FadeInType0=0 [2025-09-24 14:31:17.843] data.WU_FadeInDelay=0 [2025-09-24 14:31:17.864] max_time_out=0 [2025-09-24 14:31:17.864] No splash screen [2025-09-24 14:31:17.864] stop dss Done [2025-09-24 14:31:17.887] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:31:17.887] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:31:17.937] /dev/mem opened. [2025-09-24 14:31:17.937] Memory mapped at address 0xffff8bd67000. [2025-09-24 14:31:17.937] Read at address 0x00600018 (0xffff8bd67018): 0x00000000 [2025-09-24 14:31:17.937] Write at address 0x00600018 (0xffff8bd67018): 0x00400040, readback 0x00400040 [2025-09-24 14:31:18.032] Loaded PowerVR consumer services. [2025-09-24 14:31:18.187] Waiting data available... [2025-09-24 14:31:18.187] 512+0 records in [2025-09-24 14:31:18.187] 512+0 records out [2025-09-24 14:31:18.202] Starting syslogd/klogd: done [2025-09-24 14:31:18.218] DML Start [2025-09-24 14:31:18.395] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:31:18.586] DML res1: 0 [2025-09-24 14:31:19.093] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:31:19.093] Read Success [2025-09-24 14:31:19.093] Verifying certificate... [2025-09-24 14:31:19.317] Verified OK [2025-09-24 14:31:19.333] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:31:21.139] Verified OK [2025-09-24 14:31:21.139] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:31:21.683] Verified OK [2025-09-24 14:31:21.683] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:31:24.129] fs.protected_hardlinks = 1 [2025-09-24 14:31:24.145] fs.protected_symlinks = 1 [2025-09-24 14:31:24.145] kernel.modules_disabled = 1 [2025-09-24 14:31:24.336] [2025-09-24 14:31:24.336] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:31:25.722] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:31:33.442] SBL1:1210.0.1.0 [2025-09-24 14:31:33.490] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:31:35.057] SBL2:1210.0.1.0 [2025-09-24 14:31:35.105] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:31:35.201] j-A [2025-09-24 14:31:42.555] The R5 Autosar Classic is running [2025-09-24 14:31:42.578] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:31:42.578] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:31:43.185] INIT: version 2.96 booting [2025-09-24 14:31:43.298] INIT: Entering runlevel: 5 [2025-09-24 14:31:43.458] mtd24 attached [2025-09-24 14:31:43.458] mtd32 attached [2025-09-24 14:31:43.474] mtd28 attached [2025-09-24 14:31:43.506] ubi0:textures is mounted. [2025-09-24 14:31:43.521] ubi1:dml_code is mounted. [2025-09-24 14:31:43.586] RTNETLINK answers: File exists [2025-09-24 14:31:43.586] ubi2:animations is mounted. [2025-09-24 14:31:43.586] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:31:43.586] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:31:43.586] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:31:43.586] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:31:43.586] data.LB_FadeInType0=100 [2025-09-24 14:31:43.586] data.CHLH_FadeInType0=0 [2025-09-24 14:31:43.586] data.WU_FadeInDelay=0 [2025-09-24 14:31:43.586] max_time_out=0 [2025-09-24 14:31:43.586] No splash screen [2025-09-24 14:31:43.586] stop dss Done [2025-09-24 14:31:43.586] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:31:43.633] /dev/mem opened. [2025-09-24 14:31:43.633] Memory mapped at address 0xffffb4508000. [2025-09-24 14:31:43.659] Read at address 0x00600018 (0xffffb4508018): 0x00000000 [2025-09-24 14:31:43.659] Write at address 0x00600018 (0xffffb4508018): 0x00400040, readback 0x00400040 [2025-09-24 14:31:43.703] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:31:43.703] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:31:43.767] Loaded PowerVR consumer services. [2025-09-24 14:31:43.894] 512+0 records in [2025-09-24 14:31:43.894] 512+0 records out [2025-09-24 14:31:43.910] Waiting data available... [2025-09-24 14:31:43.943] Starting syslogd/klogd: done [2025-09-24 14:31:43.959] DML Start [2025-09-24 14:31:44.167] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:31:44.374] DML res1: 0 [2025-09-24 14:31:44.806] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:31:44.827] Read Success [2025-09-24 14:31:44.827] Verifying certificate... [2025-09-24 14:31:45.067] Verified OK [2025-09-24 14:31:45.067] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:31:46.730] Verified OK [2025-09-24 14:31:46.730] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:31:47.392] Verified OK [2025-09-24 14:31:47.392] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:31:49.934] fs.protected_hardlinks = 1 [2025-09-24 14:31:49.934] fs.protected_symlinks = 1 [2025-09-24 14:31:49.950] kernel.modules_disabled = 1 [2025-09-24 14:31:50.141] [2025-09-24 14:31:50.141] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:31:51.446] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:31:59.196] SBL1:1210.0.1.0 [2025-09-24 14:31:59.228] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:32:00.811] SBL2:1210.0.1.0 [2025-09-24 14:32:00.843] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:32:00.955] j-A [2025-09-24 14:32:08.293] The R5 Autosar Classic is running [2025-09-24 14:32:08.324] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:32:08.324] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:32:08.932] INIT: version 2.96 booting [2025-09-24 14:32:09.043] INIT: Entering runlevel: 5 [2025-09-24 14:32:09.188] mtd24 attached [2025-09-24 14:32:09.204] mtd32 attached [2025-09-24 14:32:09.220] mtd28 attached [2025-09-24 14:32:09.252] ubi0:textures is mounted. [2025-09-24 14:32:09.268] ubi1:dml_code is mounted. [2025-09-24 14:32:09.268] RTNETLINK answers: File exists [2025-09-24 14:32:09.329] ubi2:animations is mounted. [2025-09-24 14:32:09.329] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:32:09.329] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:32:09.329] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:32:09.329] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:32:09.329] data.LB_FadeInType0=100 [2025-09-24 14:32:09.329] data.CHLH_FadeInType0=0 [2025-09-24 14:32:09.329] data.WU_FadeInDelay=0 [2025-09-24 14:32:09.329] max_time_out=0 [2025-09-24 14:32:09.329] No splash screen [2025-09-24 14:32:09.329] stop dss Done [2025-09-24 14:32:09.329] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:32:09.377] /dev/mem opened. [2025-09-24 14:32:09.377] Memory mapped at address 0xffff8fdad000. [2025-09-24 14:32:09.415] Read at address 0x00600018 (0xffff8fdad018): 0x00000000 [2025-09-24 14:32:09.415] Write at address 0x00600018 (0xffff8fdad018): 0x00400040, readback 0x00400040 [2025-09-24 14:32:09.415] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:32:09.431] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:32:09.559] Loaded PowerVR consumer services. [2025-09-24 14:32:09.655] 512+0 records in [2025-09-24 14:32:09.655] 512+0 records out [2025-09-24 14:32:09.671] Waiting data available... [2025-09-24 14:32:09.687] Starting syslogd/klogd: done [2025-09-24 14:32:09.703] DML Start [2025-09-24 14:32:09.895] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:32:10.119] DML res1: 0 [2025-09-24 14:32:10.528] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:32:10.528] Read Success [2025-09-24 14:32:10.528] Verifying certificate... [2025-09-24 14:32:10.752] Verified OK [2025-09-24 14:32:10.768] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:32:12.373] Verified OK [2025-09-24 14:32:12.373] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:32:13.022] Verified OK [2025-09-24 14:32:13.022] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:32:15.690] fs.protected_hardlinks = 1 [2025-09-24 14:32:15.690] fs.protected_symlinks = 1 [2025-09-24 14:32:15.690] kernel.modules_disabled = 1 [2025-09-24 14:32:15.883] [2025-09-24 14:32:15.883] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:32:17.202] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:32:24.954] SBL1:1210.0.1.0 [2025-09-24 14:32:24.986] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:32:26.569] SBL2:1210.0.1.0 [2025-09-24 14:32:26.601] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:32:26.713] j-A [2025-09-24 14:32:34.051] The R5 Autosar Classic is running [2025-09-24 14:32:34.082] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:32:34.082] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:32:34.690] INIT: version 2.96 booting [2025-09-24 14:32:34.802] INIT: Entering runlevel: 5 [2025-09-24 14:32:34.946] mtd24 attached [2025-09-24 14:32:34.962] mtd28 attached [2025-09-24 14:32:34.994] mtd32 attached [2025-09-24 14:32:35.010] ubi0:textures is mounted. [2025-09-24 14:32:35.026] ubi1:animations is mounted. [2025-09-24 14:32:35.026] RTNETLINK answers: File exists [2025-09-24 14:32:35.060] ubi2:dml_code is mounted. [2025-09-24 14:32:35.060] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:32:35.060] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:32:35.060] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:32:35.060] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:32:35.088] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:32:35.088] data.LB_FadeInType0=100 [2025-09-24 14:32:35.088] data.CHLH_FadeInType0=0 [2025-09-24 14:32:35.088] data.WU_FadeInDelay=0 [2025-09-24 14:32:35.088] max_time_out=0 [2025-09-24 14:32:35.088] No splash screen [2025-09-24 14:32:35.088] stop dss Done [2025-09-24 14:32:35.179] /dev/mem opened. [2025-09-24 14:32:35.179] Memory mapped at address 0xffff81b45000. [2025-09-24 14:32:35.179] Read at address 0x00600018 (0xffff81b45018): 0x00000000 [2025-09-24 14:32:35.179] Write at address 0x00600018 (0xffff81b45018): 0x00400040, readback 0x00400040 [2025-09-24 14:32:35.179] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:32:35.179] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:32:35.276] Loaded PowerVR consumer services. [2025-09-24 14:32:35.416] 512+0 records in [2025-09-24 14:32:35.416] 512+0 records out [2025-09-24 14:32:35.416] Waiting data available... [2025-09-24 14:32:35.416] Starting syslogd/klogd: done [2025-09-24 14:32:35.448] DML Start [2025-09-24 14:32:35.640] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:32:35.848] DML res1: 0 [2025-09-24 14:32:36.312] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:32:36.328] Read Success [2025-09-24 14:32:36.328] Verifying certificate... [2025-09-24 14:32:36.583] Verified OK [2025-09-24 14:32:36.599] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:32:38.245] Verified OK [2025-09-24 14:32:38.245] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:32:38.838] Verified OK [2025-09-24 14:32:38.838] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:32:41.427] fs.protected_hardlinks = 1 [2025-09-24 14:32:41.443] fs.protected_symlinks = 1 [2025-09-24 14:32:41.443] kernel.modules_disabled = 1 [2025-09-24 14:32:41.635] [2025-09-24 14:32:41.635] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:32:42.924] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:32:50.664] SBL1:1210.0.1.0 [2025-09-24 14:32:50.712] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:32:52.279] SBL2:1210.0.1.0 [2025-09-24 14:32:52.327] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:32:52.424] j-A [2025-09-24 14:32:59.779] The R5 Autosar Classic is running [2025-09-24 14:32:59.802] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:32:59.802] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:33:00.410] INIT: version 2.96 booting [2025-09-24 14:33:00.521] INIT: Entering runlevel: 5 [2025-09-24 14:33:00.682] mtd24 attached [2025-09-24 14:33:00.698] mtd28 attached [2025-09-24 14:33:00.698] mtd32 attached [2025-09-24 14:33:00.794] RTNETLINK answers: File exists [2025-09-24 14:33:00.794] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:33:00.794] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:33:00.794] ubi1:animations is mounted. [2025-09-24 14:33:00.794] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:33:00.794] ubi0:textures is mounted. [2025-09-24 14:33:00.794] ubi2:dml_code is mounted. [2025-09-24 14:33:00.794] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:33:00.794] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:33:00.824] data.LB_FadeInType0=100 [2025-09-24 14:33:00.824] data.CHLH_FadeInType0=0 [2025-09-24 14:33:00.824] data.WU_FadeInDelay=0 [2025-09-24 14:33:00.824] max_time_out=0 [2025-09-24 14:33:00.824] No splash screen [2025-09-24 14:33:00.824] stop dss Done [2025-09-24 14:33:00.869] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:33:00.869] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:33:00.905] /dev/mem opened. [2025-09-24 14:33:00.905] Memory mapped at address 0xffffabc50000. [2025-09-24 14:33:00.905] Read at address 0x00600018 (0xffffabc50018): 0x00000000 [2025-09-24 14:33:00.905] Write at address 0x00600018 (0xffffabc50018): 0x00400040, readback 0x00400040 [2025-09-24 14:33:01.097] Loaded PowerVR consumer services. [2025-09-24 14:33:01.145] Waiting data available... [2025-09-24 14:33:01.161] 512+0 records in [2025-09-24 14:33:01.161] 512+0 records out [2025-09-24 14:33:01.192] Starting syslogd/klogd: done [2025-09-24 14:33:01.209] DML Start [2025-09-24 14:33:01.369] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:33:01.592] DML res1: 0 [2025-09-24 14:33:02.078] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:33:02.078] Read Success [2025-09-24 14:33:02.078] Verifying certificate... [2025-09-24 14:33:02.334] Verified OK [2025-09-24 14:33:02.350] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:33:03.933] Verified OK [2025-09-24 14:33:03.933] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:33:04.582] Verified OK [2025-09-24 14:33:04.582] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:33:07.316] fs.protected_hardlinks = 1 [2025-09-24 14:33:07.343] fs.protected_symlinks = 1 [2025-09-24 14:33:07.343] kernel.modules_disabled = 1 [2025-09-24 14:33:07.534] [2025-09-24 14:33:07.534] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:33:08.714] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:33:16.461] SBL1:1210.0.1.0 [2025-09-24 14:33:16.509] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:33:18.076] SBL2:1210.0.1.0 [2025-09-24 14:33:18.123] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:33:18.219] j-A [2025-09-24 14:33:25.574] The R5 Autosar Classic is running [2025-09-24 14:33:25.597] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:33:25.597] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:33:26.205] INIT: version 2.96 booting [2025-09-24 14:33:26.316] INIT: Entering runlevel: 5 [2025-09-24 14:33:26.476] mtd28 attached [2025-09-24 14:33:26.476] mtd32 attached [2025-09-24 14:33:26.492] mtd24 attached [2025-09-24 14:33:26.508] ubi0:animations is mounted. [2025-09-24 14:33:26.541] RTNETLINK answers: File exists [2025-09-24 14:33:26.581] ubi2:textures is mounted. [2025-09-24 14:33:26.581] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:33:26.581] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:33:26.581] ubi1:dml_code is mounted. [2025-09-24 14:33:26.581] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:33:26.581] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:33:26.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:33:26.601] data.LB_FadeInType0=100 [2025-09-24 14:33:26.601] data.CHLH_FadeInType0=0 [2025-09-24 14:33:26.601] data.WU_FadeInDelay=0 [2025-09-24 14:33:26.601] max_time_out=0 [2025-09-24 14:33:26.601] No splash screen [2025-09-24 14:33:26.601] stop dss Done [2025-09-24 14:33:26.633] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:33:26.681] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:33:26.681] /dev/mem opened. [2025-09-24 14:33:26.681] Memory mapped at address 0xffff97207000. [2025-09-24 14:33:26.681] Read at address 0x00600018 (0xffff97207018): 0x00000000 [2025-09-24 14:33:26.681] Write at address 0x00600018 (0xffff97207018): 0x00400040, readback 0x00400040 [2025-09-24 14:33:26.858] Loaded PowerVR consumer services. [2025-09-24 14:33:26.922] Waiting data available... [2025-09-24 14:33:26.922] 512+0 records in [2025-09-24 14:33:26.938] 512+0 records out [2025-09-24 14:33:26.969] Starting syslogd/klogd: done [2025-09-24 14:33:26.986] DML Start [2025-09-24 14:33:27.145] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:33:27.369] DML res1: 0 [2025-09-24 14:33:27.859] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:33:27.859] Read Success [2025-09-24 14:33:27.859] Verifying certificate... [2025-09-24 14:33:28.098] Verified OK [2025-09-24 14:33:28.130] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:33:29.788] Verified OK [2025-09-24 14:33:29.788] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:33:30.380] Verified OK [2025-09-24 14:33:30.380] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:33:32.970] fs.protected_hardlinks = 1 [2025-09-24 14:33:32.970] fs.protected_symlinks = 1 [2025-09-24 14:33:32.985] kernel.modules_disabled = 1 [2025-09-24 14:33:33.178] [2025-09-24 14:33:33.178] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:33:34.478] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:33:42.195] SBL1:1210.0.1.0 [2025-09-24 14:33:42.227] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:33:43.810] SBL2:1210.0.1.0 [2025-09-24 14:33:43.842] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:33:43.954] j-A [2025-09-24 14:33:51.324] The R5 Autosar Classic is running [2025-09-24 14:33:51.324] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:33:51.324] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:33:51.932] INIT: version 2.96 booting [2025-09-24 14:33:52.044] INIT: Entering runlevel: 5 [2025-09-24 14:33:52.204] mtd24 attached [2025-09-24 14:33:52.204] mtd28 attached [2025-09-24 14:33:52.220] mtd32 attached [2025-09-24 14:33:52.252] ubi0:textures is mounted. [2025-09-24 14:33:52.268] RTNETLINK answers: File exists [2025-09-24 14:33:52.335] ubi1:animations is mounted. [2025-09-24 14:33:52.335] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:33:52.335] ubi2:dml_code is mounted. [2025-09-24 14:33:52.335] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:33:52.335] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:33:52.335] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:33:52.335] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:33:52.335] data.LB_FadeInType0=100 [2025-09-24 14:33:52.335] data.CHLH_FadeInType0=0 [2025-09-24 14:33:52.335] data.WU_FadeInDelay=0 [2025-09-24 14:33:52.335] max_time_out=0 [2025-09-24 14:33:52.335] No splash screen [2025-09-24 14:33:52.335] stop dss Done [2025-09-24 14:33:52.367] /dev/mem opened. [2025-09-24 14:33:52.367] Memory mapped at address 0xffff9c6d3000. [2025-09-24 14:33:52.393] Read at address 0x00600018 (0xffff9c6d3018): 0x00000000 [2025-09-24 14:33:52.393] Write at address 0x00600018 (0xffff9c6d3018): 0x00400040, readback 0x00400040 [2025-09-24 14:33:52.425] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:33:52.425] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:33:52.584] Loaded PowerVR consumer services. [2025-09-24 14:33:52.665] Waiting data available... [2025-09-24 14:33:52.681] 512+0 records in [2025-09-24 14:33:52.681] 512+0 records out [2025-09-24 14:33:52.713] Starting syslogd/klogd: done [2025-09-24 14:33:52.729] DML Start [2025-09-24 14:33:52.889] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:33:53.128] DML res1: 0 [2025-09-24 14:33:53.570] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:33:53.570] Read Success [2025-09-24 14:33:53.570] Verifying certificate... [2025-09-24 14:33:53.794] Verified OK [2025-09-24 14:33:53.809] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:33:55.454] Verified OK [2025-09-24 14:33:55.454] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:33:56.077] Verified OK [2025-09-24 14:33:56.077] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:33:58.778] fs.protected_hardlinks = 1 [2025-09-24 14:33:58.794] fs.protected_symlinks = 1 [2025-09-24 14:33:58.794] kernel.modules_disabled = 1 [2025-09-24 14:33:59.003] [2025-09-24 14:33:59.003] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:34:00.244] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:34:07.933] SBL1:1210.0.1.0 [2025-09-24 14:34:07.981] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:34:09.548] SBL2:1210.0.1.0 [2025-09-24 14:34:09.579] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:34:09.691] j-A [2025-09-24 14:34:17.046] The R5 Autosar Classic is running [2025-09-24 14:34:17.046] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:34:17.067] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:34:17.674] INIT: version 2.96 booting [2025-09-24 14:34:17.786] INIT: Entering runlevel: 5 [2025-09-24 14:34:17.946] mtd28 attached [2025-09-24 14:34:17.946] mtd24 attached [2025-09-24 14:34:17.962] mtd32 attached [2025-09-24 14:34:17.994] ubi0:animations is mounted. [2025-09-24 14:34:18.077] ubi1:textures is mounted. [2025-09-24 14:34:18.077] RTNETLINK answers: File exists [2025-09-24 14:34:18.077] ubi2:dml_code is mounted. [2025-09-24 14:34:18.077] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:34:18.077] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:34:18.077] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:34:18.077] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:34:18.077] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:34:18.077] data.LB_FadeInType0=100 [2025-09-24 14:34:18.077] data.CHLH_FadeInType0=0 [2025-09-24 14:34:18.077] data.WU_FadeInDelay=0 [2025-09-24 14:34:18.077] max_time_out=0 [2025-09-24 14:34:18.077] No splash screen [2025-09-24 14:34:18.077] stop dss Done [2025-09-24 14:34:18.151] /dev/mem opened. [2025-09-24 14:34:18.151] Memory mapped at address 0xffffa864b000. [2025-09-24 14:34:18.151] Read at address 0x00600018 (0xffffa864b018): 0x00000000 [2025-09-24 14:34:18.151] Write at address 0x00600018 (0xffffa864b018): 0x00400040, readback 0x00400040 [2025-09-24 14:34:18.151] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:34:18.151] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:34:18.279] Loaded PowerVR consumer services. [2025-09-24 14:34:18.407] Waiting data available... [2025-09-24 14:34:18.423] 512+0 records in [2025-09-24 14:34:18.423] 512+0 records out [2025-09-24 14:34:18.439] Starting syslogd/klogd: done [2025-09-24 14:34:18.455] DML Start [2025-09-24 14:34:18.630] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:34:18.854] DML res1: 0 [2025-09-24 14:34:19.317] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:34:19.317] Read Success [2025-09-24 14:34:19.317] Verifying certificate... [2025-09-24 14:34:19.541] Verified OK [2025-09-24 14:34:19.557] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:34:21.295] Verified OK [2025-09-24 14:34:21.295] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:34:21.902] Verified OK [2025-09-24 14:34:21.902] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:34:24.523] fs.protected_hardlinks = 1 [2025-09-24 14:34:24.539] fs.protected_symlinks = 1 [2025-09-24 14:34:24.539] kernel.modules_disabled = 1 [2025-09-24 14:34:24.732] [2025-09-24 14:34:24.732] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:34:25.958] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:34:33.681] SBL1:1210.0.1.0 [2025-09-24 14:34:33.713] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:34:35.296] SBL2:1210.0.1.0 [2025-09-24 14:34:35.327] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:34:35.439] j-A [2025-09-24 14:34:42.809] The R5 Autosar Classic is running [2025-09-24 14:34:42.809] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:34:42.809] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:34:43.415] INIT: version 2.96 booting [2025-09-24 14:34:43.527] INIT: Entering runlevel: 5 [2025-09-24 14:34:43.671] mtd24 attached [2025-09-24 14:34:43.687] mtd28 attached [2025-09-24 14:34:43.703] mtd32 attached [2025-09-24 14:34:43.751] RTNETLINK answers: File exists [2025-09-24 14:34:43.809] ubi2:dml_code is mounted. [2025-09-24 14:34:43.809] ubi1:animations is mounted. [2025-09-24 14:34:43.809] ubi0:textures is mounted. [2025-09-24 14:34:43.809] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:34:43.809] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:34:43.809] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:34:43.809] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:34:43.809] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:34:43.809] data.LB_FadeInType0=100 [2025-09-24 14:34:43.809] data.CHLH_FadeInType0=0 [2025-09-24 14:34:43.809] data.WU_FadeInDelay=0 [2025-09-24 14:34:43.809] max_time_out=0 [2025-09-24 14:34:43.809] No splash screen [2025-09-24 14:34:43.809] stop dss Done [2025-09-24 14:34:43.887] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:34:43.887] /dev/mem opened. [2025-09-24 14:34:43.887] Memory mapped at address 0xffffb951a000. [2025-09-24 14:34:43.887] Read at address 0x00600018 (0xffffb951a018): 0x00000000 [2025-09-24 14:34:43.887] Write at address 0x00600018 (0xffffb951a018): 0x00400040, readback 0x00400040 [2025-09-24 14:34:43.887] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:34:43.968] Loaded PowerVR consumer services. [2025-09-24 14:34:44.143] Waiting data available... [2025-09-24 14:34:44.159] 512+0 records in [2025-09-24 14:34:44.159] 512+0 records out [2025-09-24 14:34:44.207] Starting syslogd/klogd: done [2025-09-24 14:34:44.223] DML Start [2025-09-24 14:34:44.431] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:34:44.591] DML res1: 0 [2025-09-24 14:34:45.035] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:34:45.035] Read Success [2025-09-24 14:34:45.035] Verifying certificate... [2025-09-24 14:34:45.292] Verified OK [2025-09-24 14:34:45.308] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:34:46.977] Verified OK [2025-09-24 14:34:46.977] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:34:47.585] Verified OK [2025-09-24 14:34:47.585] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:34:50.255] fs.protected_hardlinks = 1 [2025-09-24 14:34:50.282] fs.protected_symlinks = 1 [2025-09-24 14:34:50.282] kernel.modules_disabled = 1 [2025-09-24 14:34:50.457] [2025-09-24 14:34:50.457] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:34:51.711] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:34:59.407] SBL1:1210.0.1.0 [2025-09-24 14:34:59.455] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:35:01.022] SBL2:1210.0.1.0 [2025-09-24 14:35:01.070] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:35:01.165] j-A [2025-09-24 14:35:08.520] The R5 Autosar Classic is running [2025-09-24 14:35:08.545] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:35:08.545] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:35:09.152] INIT: version 2.96 booting [2025-09-24 14:35:09.264] INIT: Entering runlevel: 5 [2025-09-24 14:35:09.424] mtd28 attached [2025-09-24 14:35:09.424] mtd24 attached [2025-09-24 14:35:09.440] mtd32 attached [2025-09-24 14:35:09.472] ubi0:animations is mounted. [2025-09-24 14:35:09.488] ubi1:textures is mounted. [2025-09-24 14:35:09.540] RTNETLINK answers: File exists [2025-09-24 14:35:09.540] ubi2:dml_code is mounted. [2025-09-24 14:35:09.540] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:35:09.540] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:35:09.540] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:35:09.540] data.LB_FadeInType0=100 [2025-09-24 14:35:09.540] data.CHLH_FadeInType0=0 [2025-09-24 14:35:09.540] data.WU_FadeInDelay=0 [2025-09-24 14:35:09.540] max_time_out=0 [2025-09-24 14:35:09.540] No splash screen [2025-09-24 14:35:09.540] stop dss Done [2025-09-24 14:35:09.540] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:35:09.540] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:35:09.571] /dev/mem opened. [2025-09-24 14:35:09.598] Memory mapped at address 0xffffabb05000. [2025-09-24 14:35:09.598] Read at address 0x00600018 (0xffffabb05018): 0x00000000 [2025-09-24 14:35:09.598] Write at address 0x00600018 (0xffffabb05018): 0x00400040, readback 0x00400040 [2025-09-24 14:35:09.654] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:35:09.654] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:35:09.718] Loaded PowerVR consumer services. [2025-09-24 14:35:09.861] 512+0 records in [2025-09-24 14:35:09.861] 512+0 records out [2025-09-24 14:35:09.878] Waiting data available... [2025-09-24 14:35:09.910] Starting syslogd/klogd: done [2025-09-24 14:35:09.926] DML Start [2025-09-24 14:35:10.085] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:35:10.309] DML res1: 0 [2025-09-24 14:35:10.755] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:35:10.755] Read Success [2025-09-24 14:35:10.755] Verifying certificate... [2025-09-24 14:35:10.979] Verified OK [2025-09-24 14:35:10.995] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:35:12.769] Verified OK [2025-09-24 14:35:12.769] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:35:13.375] Verified OK [2025-09-24 14:35:13.375] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:35:15.918] fs.protected_hardlinks = 1 [2025-09-24 14:35:15.934] fs.protected_symlinks = 1 [2025-09-24 14:35:15.934] kernel.modules_disabled = 1 [2025-09-24 14:35:16.127] [2025-09-24 14:35:16.127] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:35:17.388] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:35:25.155] SBL1:1210.0.1.0 [2025-09-24 14:35:25.187] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:35:26.770] SBL2:1210.0.1.0 [2025-09-24 14:35:26.801] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:35:26.913] j-A [2025-09-24 14:35:34.251] The R5 Autosar Classic is running [2025-09-24 14:35:34.282] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:35:34.282] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:35:34.890] INIT: version 2.96 booting [2025-09-24 14:35:35.001] INIT: Entering runlevel: 5 [2025-09-24 14:35:35.162] mtd32 attached [2025-09-24 14:35:35.162] mtd24 attached [2025-09-24 14:35:35.178] mtd28 attached [2025-09-24 14:35:35.226] RTNETLINK answers: File exists [2025-09-24 14:35:35.268] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:35:35.268] ubi0:dml_code is mounted. [2025-09-24 14:35:35.268] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:35:35.268] ubi2:animations is mounted. [2025-09-24 14:35:35.268] ubi1:textures is mounted. [2025-09-24 14:35:35.268] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:35:35.268] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:35:35.268] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:35:35.291] data.LB_FadeInType0=100 [2025-09-24 14:35:35.291] data.CHLH_FadeInType0=0 [2025-09-24 14:35:35.291] data.WU_FadeInDelay=0 [2025-09-24 14:35:35.291] max_time_out=0 [2025-09-24 14:35:35.291] No splash screen [2025-09-24 14:35:35.291] stop dss Done [2025-09-24 14:35:35.372] /dev/mem opened. [2025-09-24 14:35:35.372] Memory mapped at address 0xffff8bd28000. [2025-09-24 14:35:35.372] Read at address 0x00600018 (0xffff8bd28018): 0x00000000 [2025-09-24 14:35:35.372] Write at address 0x00600018 (0xffff8bd28018): 0x00400040, readback 0x00400040 [2025-09-24 14:35:35.372] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:35:35.388] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:35:35.468] Loaded PowerVR consumer services. [2025-09-24 14:35:35.595] 512+0 records in [2025-09-24 14:35:35.620] 512+0 records out [2025-09-24 14:35:35.620] Waiting data available... [2025-09-24 14:35:35.652] Starting syslogd/klogd: done [2025-09-24 14:35:35.668] DML Start [2025-09-24 14:35:35.844] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:35:36.052] DML res1: 0 [2025-09-24 14:35:36.513] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:35:36.513] Read Success [2025-09-24 14:35:36.513] Verifying certificate... [2025-09-24 14:35:36.753] Verified OK [2025-09-24 14:35:36.768] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:35:38.346] Verified OK [2025-09-24 14:35:38.346] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:35:38.945] Verified OK [2025-09-24 14:35:38.945] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:35:41.598] fs.protected_hardlinks = 1 [2025-09-24 14:35:41.615] fs.protected_symlinks = 1 [2025-09-24 14:35:41.615] kernel.modules_disabled = 1 [2025-09-24 14:35:41.822] [2025-09-24 14:35:41.822] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:35:43.172] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:35:50.880] SBL1:1210.0.1.0 [2025-09-24 14:35:50.912] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:35:52.495] SBL2:1210.0.1.0 [2025-09-24 14:35:52.527] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:35:52.638] j-A [2025-09-24 14:36:00.011] The R5 Autosar Classic is running [2025-09-24 14:36:00.011] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:36:00.011] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:36:00.618] INIT: version 2.96 booting [2025-09-24 14:36:00.731] INIT: Entering runlevel: 5 [2025-09-24 14:36:00.874] mtd32 attached [2025-09-24 14:36:00.890] mtd24 attached [2025-09-24 14:36:00.906] mtd28 attached [2025-09-24 14:36:00.938] ubi0:dml_code is mounted. [2025-09-24 14:36:00.938] ubi1:textures is mounted. [2025-09-24 14:36:00.954] RTNETLINK answers: File exists [2025-09-24 14:36:01.010] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:36:01.010] ubi2:animations is mounted. [2025-09-24 14:36:01.010] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:36:01.010] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:36:01.010] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:36:01.010] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:36:01.010] data.LB_FadeInType0=100 [2025-09-24 14:36:01.010] data.CHLH_FadeInType0=0 [2025-09-24 14:36:01.010] data.WU_FadeInDelay=0 [2025-09-24 14:36:01.010] max_time_out=0 [2025-09-24 14:36:01.010] No splash screen [2025-09-24 14:36:01.010] stop dss Done [2025-09-24 14:36:01.086] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:36:01.086] /dev/mem opened. [2025-09-24 14:36:01.086] Memory mapped at address 0xffff9e20d000. [2025-09-24 14:36:01.086] Read at address 0x00600018 (0xffff9e20d018): 0x00000000 [2025-09-24 14:36:01.086] Write at address 0x00600018 (0xffff9e20d018): 0x00400040, readback 0x00400040 [2025-09-24 14:36:01.086] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:36:01.294] Loaded PowerVR consumer services. [2025-09-24 14:36:01.326] 512+0 records in [2025-09-24 14:36:01.326] 512+0 records out [2025-09-24 14:36:01.358] Waiting data available... [2025-09-24 14:36:01.390] Starting syslogd/klogd: done [2025-09-24 14:36:01.405] DML Start [2025-09-24 14:36:01.582] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:36:01.806] DML res1: 0 [2025-09-24 14:36:02.294] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:36:02.294] Read Success [2025-09-24 14:36:02.294] Verifying certificate... [2025-09-24 14:36:02.534] Verified OK [2025-09-24 14:36:02.550] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:36:04.097] Verified OK [2025-09-24 14:36:04.097] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:36:04.720] Verified OK [2025-09-24 14:36:04.720] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:36:07.437] fs.protected_hardlinks = 1 [2025-09-24 14:36:07.437] fs.protected_symlinks = 1 [2025-09-24 14:36:07.437] kernel.modules_disabled = 1 [2025-09-24 14:36:07.612] [2025-09-24 14:36:07.612] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:36:08.903] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:36:16.608] SBL1:1210.0.1.0 [2025-09-24 14:36:16.640] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:36:18.223] SBL2:1210.0.1.0 [2025-09-24 14:36:18.255] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:36:18.367] j-A [2025-09-24 14:36:25.737] The R5 Autosar Classic is running [2025-09-24 14:36:25.737] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:36:25.737] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:36:26.345] INIT: version 2.96 booting [2025-09-24 14:36:26.456] INIT: Entering runlevel: 5 [2025-09-24 14:36:26.600] mtd28 attached [2025-09-24 14:36:26.616] mtd32 attached [2025-09-24 14:36:26.632] mtd24 attached [2025-09-24 14:36:26.664] ubi0:animations is mounted. [2025-09-24 14:36:26.680] RTNETLINK answers: File exists [2025-09-24 14:36:26.718] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:36:26.718] ubi1:dml_code is mounted. [2025-09-24 14:36:26.718] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:36:26.718] ubi2:textures is mounted. [2025-09-24 14:36:26.718] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:36:26.718] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:36:26.718] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:36:26.749] data.LB_FadeInType0=100 [2025-09-24 14:36:26.749] data.CHLH_FadeInType0=0 [2025-09-24 14:36:26.749] data.WU_FadeInDelay=0 [2025-09-24 14:36:26.749] max_time_out=0 [2025-09-24 14:36:26.749] No splash screen [2025-09-24 14:36:26.749] stop dss Done [2025-09-24 14:36:26.765] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:36:26.781] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:36:26.797] /dev/mem opened. [2025-09-24 14:36:26.829] Memory mapped at address 0xffff9d10c000. [2025-09-24 14:36:26.829] Read at address 0x00600018 (0xffff9d10c018): 0x00000000 [2025-09-24 14:36:26.829] Write at address 0x00600018 (0xffff9d10c018): 0x00400040, readback 0x00400040 [2025-09-24 14:36:27.037] Loaded PowerVR consumer services. [2025-09-24 14:36:27.068] 512+0 records in [2025-09-24 14:36:27.068] 512+0 records out [2025-09-24 14:36:27.084] Waiting data available... [2025-09-24 14:36:27.116] Starting syslogd/klogd: done [2025-09-24 14:36:27.149] DML Start [2025-09-24 14:36:27.325] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:36:27.533] DML res1: 0 [2025-09-24 14:36:27.964] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:36:27.985] Read Success [2025-09-24 14:36:27.985] Verifying certificate... [2025-09-24 14:36:28.209] Verified OK [2025-09-24 14:36:28.225] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:36:30.076] Verified OK [2025-09-24 14:36:30.076] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:36:30.617] Verified OK [2025-09-24 14:36:30.617] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:36:33.063] fs.protected_hardlinks = 1 [2025-09-24 14:36:33.063] fs.protected_symlinks = 1 [2025-09-24 14:36:33.079] kernel.modules_disabled = 1 [2025-09-24 14:36:33.271] [2025-09-24 14:36:33.271] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:36:34.593] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:36:42.343] SBL1:1210.0.1.0 [2025-09-24 14:36:42.390] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:36:43.956] SBL2:1210.0.1.0 [2025-09-24 14:36:44.004] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:36:44.101] j-A [2025-09-24 14:36:51.453] The R5 Autosar Classic is running [2025-09-24 14:36:51.478] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:36:51.478] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:36:52.086] INIT: version 2.96 booting [2025-09-24 14:36:52.198] INIT: Entering runlevel: 5 [2025-09-24 14:36:52.357] mtd32 attached [2025-09-24 14:36:52.357] mtd28 attached [2025-09-24 14:36:52.373] mtd24 attached [2025-09-24 14:36:52.421] RTNETLINK answers: File exists [2025-09-24 14:36:52.421] ubi1:animations is mounted. [2025-09-24 14:36:52.465] ubi2:textures is mounted. [2025-09-24 14:36:52.465] ubi0:dml_code is mounted. [2025-09-24 14:36:52.465] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:36:52.465] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:36:52.465] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:36:52.465] data.LB_FadeInType0=100 [2025-09-24 14:36:52.465] data.CHLH_FadeInType0=0 [2025-09-24 14:36:52.491] data.WU_FadeInDelay=0 [2025-09-24 14:36:52.491] max_time_out=0 [2025-09-24 14:36:52.491] No splash screen [2025-09-24 14:36:52.491] stop dss Done [2025-09-24 14:36:52.491] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:36:52.491] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:36:52.578] /dev/mem opened. [2025-09-24 14:36:52.578] Memory mapped at address 0xffff9cc69000. [2025-09-24 14:36:52.578] Read at address 0x00600018 (0xffff9cc69018): 0x00000000 [2025-09-24 14:36:52.578] Write at address 0x00600018 (0xffff9cc69018): 0x00400040, readback 0x00400040 [2025-09-24 14:36:52.578] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:36:52.593] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:36:52.769] Loaded PowerVR consumer services. [2025-09-24 14:36:52.818] 512+0 records in [2025-09-24 14:36:52.834] 512+0 records out [2025-09-24 14:36:52.834] Waiting data available... [2025-09-24 14:36:52.865] Starting syslogd/klogd: done [2025-09-24 14:36:52.881] DML Start [2025-09-24 14:36:53.057] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:36:53.249] DML res1: 0 [2025-09-24 14:36:53.693] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:36:53.693] Read Success [2025-09-24 14:36:53.693] Verifying certificate... [2025-09-24 14:36:53.965] Verified OK [2025-09-24 14:36:53.981] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:36:55.573] Verified OK [2025-09-24 14:36:55.573] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:36:56.207] Verified OK [2025-09-24 14:36:56.207] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:36:58.877] fs.protected_hardlinks = 1 [2025-09-24 14:36:58.877] fs.protected_symlinks = 1 [2025-09-24 14:36:58.893] kernel.modules_disabled = 1 [2025-09-24 14:36:59.085] [2025-09-24 14:36:59.085] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:37:00.377] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:37:08.093] SBL1:1210.0.1.0 [2025-09-24 14:37:08.141] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:37:09.707] SBL2:1210.0.1.0 [2025-09-24 14:37:09.755] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:37:09.851] j-A [2025-09-24 14:37:17.205] The R5 Autosar Classic is running [2025-09-24 14:37:17.228] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:37:17.228] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:37:17.835] INIT: version 2.96 booting [2025-09-24 14:37:17.947] INIT: Entering runlevel: 5 [2025-09-24 14:37:18.107] mtd32 attached [2025-09-24 14:37:18.123] mtd28 attached [2025-09-24 14:37:18.123] mtd24 attached [2025-09-24 14:37:18.139] ubi0:dml_code is mounted. [2025-09-24 14:37:18.171] RTNETLINK answers: File exists [2025-09-24 14:37:18.241] ubi1:animations is mounted. [2025-09-24 14:37:18.241] ubi2:textures is mounted. [2025-09-24 14:37:18.241] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:37:18.241] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:37:18.241] data.LB_FadeInType0=100 [2025-09-24 14:37:18.241] data.CHLH_FadeInType0=0 [2025-09-24 14:37:18.241] data.WU_FadeInDelay=0 [2025-09-24 14:37:18.241] max_time_out=0 [2025-09-24 14:37:18.241] No splash screen [2025-09-24 14:37:18.241] stop dss Done [2025-09-24 14:37:18.241] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:37:18.241] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:37:18.241] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:37:18.296] /dev/mem opened. [2025-09-24 14:37:18.296] Memory mapped at address 0xffffa45cc000. [2025-09-24 14:37:18.296] Read at address 0x00600018 (0xffffa45cc018): 0x00000000 [2025-09-24 14:37:18.296] Write at address 0x00600018 (0xffffa45cc018): 0x00400040, readback 0x00400040 [2025-09-24 14:37:18.313] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:37:18.328] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:37:18.409] Loaded PowerVR consumer services. [2025-09-24 14:37:18.553] Waiting data available... [2025-09-24 14:37:18.553] 512+0 records in [2025-09-24 14:37:18.553] 512+0 records out [2025-09-24 14:37:18.600] Starting syslogd/klogd: done [2025-09-24 14:37:18.616] DML Start [2025-09-24 14:37:18.760] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:37:18.984] DML res1: 0 [2025-09-24 14:37:19.488] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:37:19.488] Read Success [2025-09-24 14:37:19.488] Verifying certificate... [2025-09-24 14:37:19.760] Verified OK [2025-09-24 14:37:19.776] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:37:21.502] Verified OK [2025-09-24 14:37:21.502] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:37:22.005] Verified OK [2025-09-24 14:37:22.005] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:37:24.563] fs.protected_hardlinks = 1 [2025-09-24 14:37:24.563] fs.protected_symlinks = 1 [2025-09-24 14:37:24.579] kernel.modules_disabled = 1 [2025-09-24 14:37:24.771] [2025-09-24 14:37:24.771] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:37:26.114] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:37:33.839] SBL1:1210.0.1.0 [2025-09-24 14:37:33.871] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:37:35.453] SBL2:1210.0.1.0 [2025-09-24 14:37:35.485] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:37:35.598] j-A [2025-09-24 14:37:42.936] The R5 Autosar Classic is running [2025-09-24 14:37:42.967] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:37:42.967] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:37:43.573] INIT: version 2.96 booting [2025-09-24 14:37:43.686] INIT: Entering runlevel: 5 [2025-09-24 14:37:43.846] mtd32 attached [2025-09-24 14:37:43.861] mtd24 attached [2025-09-24 14:37:43.861] mtd28 attached [2025-09-24 14:37:43.909] RTNETLINK answers: File exists [2025-09-24 14:37:43.952] ubi0:dml_code is mounted. [2025-09-24 14:37:43.952] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:37:43.952] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:37:43.952] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:37:43.952] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:37:43.952] ubi1:textures is mounted. [2025-09-24 14:37:43.952] ubi2:animations is mounted. [2025-09-24 14:37:43.952] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:37:44.003] data.LB_FadeInType0=100 [2025-09-24 14:37:44.003] data.CHLH_FadeInType0=0 [2025-09-24 14:37:44.003] data.WU_FadeInDelay=0 [2025-09-24 14:37:44.003] max_time_out=0 [2025-09-24 14:37:44.003] No splash screen [2025-09-24 14:37:44.003] stop dss Done [2025-09-24 14:37:44.003] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:37:44.003] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:37:44.035] /dev/mem opened. [2025-09-24 14:37:44.035] Memory mapped at address 0xffffa74e6000. [2025-09-24 14:37:44.061] Read at address 0x00600018 (0xffffa74e6018): 0x00000000 [2025-09-24 14:37:44.061] Write at address 0x00600018 (0xffffa74e6018): 0x00400040, readback 0x00400040 [2025-09-24 14:37:44.188] Loaded PowerVR consumer services. [2025-09-24 14:37:44.284] 512+0 records in [2025-09-24 14:37:44.284] 512+0 records out [2025-09-24 14:37:44.317] Waiting data available... [2025-09-24 14:37:44.332] Starting syslogd/klogd: done [2025-09-24 14:37:44.348] DML Start [2025-09-24 14:37:44.540] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:37:44.764] DML res1: 0 [2025-09-24 14:37:45.163] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:37:45.189] Read Success [2025-09-24 14:37:45.189] Verifying certificate... [2025-09-24 14:37:45.445] Verified OK [2025-09-24 14:37:45.461] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:37:47.139] Verified OK [2025-09-24 14:37:47.139] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:37:47.739] Verified OK [2025-09-24 14:37:47.739] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:37:50.389] fs.protected_hardlinks = 1 [2025-09-24 14:37:50.389] fs.protected_symlinks = 1 [2025-09-24 14:37:50.389] kernel.modules_disabled = 1 [2025-09-24 14:37:50.581] [2025-09-24 14:37:50.581] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:37:51.860] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:37:59.564] SBL1:1210.0.1.0 [2025-09-24 14:37:59.612] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:38:01.179] SBL2:1210.0.1.0 [2025-09-24 14:38:01.227] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:38:01.324] j-A [2025-09-24 14:38:08.678] The R5 Autosar Classic is running [2025-09-24 14:38:08.701] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:38:08.701] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:38:09.309] INIT: version 2.96 booting [2025-09-24 14:38:09.420] INIT: Entering runlevel: 5 [2025-09-24 14:38:09.581] mtd28 attached [2025-09-24 14:38:09.581] mtd24 attached [2025-09-24 14:38:09.613] mtd32 attached [2025-09-24 14:38:09.613] ubi0:animations is mounted. [2025-09-24 14:38:09.644] ubi1:textures is mounted. [2025-09-24 14:38:09.660] RTNETLINK answers: File exists [2025-09-24 14:38:09.660] ubi2:dml_code is mounted. [2025-09-24 14:38:09.713] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:38:09.713] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:38:09.713] data.LB_FadeInType0=100 [2025-09-24 14:38:09.713] data.CHLH_FadeInType0=0 [2025-09-24 14:38:09.713] data.WU_FadeInDelay=0 [2025-09-24 14:38:09.713] max_time_out=0 [2025-09-24 14:38:09.713] No splash screen [2025-09-24 14:38:09.713] stop dss Done [2025-09-24 14:38:09.713] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:38:09.713] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:38:09.713] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:38:09.745] /dev/mem opened. [2025-09-24 14:38:09.745] Memory mapped at address 0xffff8755b000. [2025-09-24 14:38:09.771] Read at address 0x00600018 (0xffff8755b018): 0x00000000 [2025-09-24 14:38:09.771] Write at address 0x00600018 (0xffff8755b018): 0x00400040, readback 0x00400040 [2025-09-24 14:38:09.771] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:38:09.803] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:38:09.932] Loaded PowerVR consumer services. [2025-09-24 14:38:10.043] Waiting data available... [2025-09-24 14:38:10.059] 512+0 records in [2025-09-24 14:38:10.059] 512+0 records out [2025-09-24 14:38:10.107] Starting syslogd/klogd: done [2025-09-24 14:38:10.123] DML Start [2025-09-24 14:38:10.315] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:38:10.507] DML res1: 0 [2025-09-24 14:38:10.955] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:38:10.976] Read Success [2025-09-24 14:38:10.976] Verifying certificate... [2025-09-24 14:38:11.215] Verified OK [2025-09-24 14:38:11.231] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:38:12.906] Verified OK [2025-09-24 14:38:12.906] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:38:13.558] Verified OK [2025-09-24 14:38:13.558] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:38:16.082] fs.protected_hardlinks = 1 [2025-09-24 14:38:16.082] fs.protected_symlinks = 1 [2025-09-24 14:38:16.098] kernel.modules_disabled = 1 [2025-09-24 14:38:16.291] [2025-09-24 14:38:16.291] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:38:17.626] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:38:25.300] SBL1:1210.0.1.0 [2025-09-24 14:38:25.348] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:38:26.914] SBL2:1210.0.1.0 [2025-09-24 14:38:26.946] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:38:27.058] j-A [2025-09-24 14:38:34.434] The R5 Autosar Classic is running [2025-09-24 14:38:34.434] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:38:34.434] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:38:35.042] INIT: version 2.96 booting [2025-09-24 14:38:35.153] INIT: Entering runlevel: 5 [2025-09-24 14:38:35.298] mtd24 attached [2025-09-24 14:38:35.314] mtd28 attached [2025-09-24 14:38:35.330] mtd32 attached [2025-09-24 14:38:35.361] ubi0:textures is mounted. [2025-09-24 14:38:35.377] RTNETLINK answers: File exists [2025-09-24 14:38:35.441] ubi2:dml_code is mounted. [2025-09-24 14:38:35.441] ubi1:animations is mounted. [2025-09-24 14:38:35.441] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:38:35.441] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:38:35.441] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:38:35.441] data.LB_FadeInType0=100 [2025-09-24 14:38:35.441] data.CHLH_FadeInType0=0 [2025-09-24 14:38:35.441] data.WU_FadeInDelay=0 [2025-09-24 14:38:35.441] max_time_out=0 [2025-09-24 14:38:35.441] No splash screen [2025-09-24 14:38:35.441] stop dss Done [2025-09-24 14:38:35.441] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:38:35.441] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:38:35.473] /dev/mem opened. [2025-09-24 14:38:35.505] Memory mapped at address 0xffffb9567000. [2025-09-24 14:38:35.505] Read at address 0x00600018 (0xffffb9567018): 0x00000000 [2025-09-24 14:38:35.505] Write at address 0x00600018 (0xffffb9567018): 0x00400040, readback 0x00400040 [2025-09-24 14:38:35.521] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:38:35.537] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:38:35.601] Loaded PowerVR consumer services. [2025-09-24 14:38:35.775] Waiting data available... [2025-09-24 14:38:35.775] 512+0 records in [2025-09-24 14:38:35.775] 512+0 records out [2025-09-24 14:38:35.806] Starting syslogd/klogd: done [2025-09-24 14:38:35.822] DML Start [2025-09-24 14:38:36.015] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:38:36.254] DML res1: 0 [2025-09-24 14:38:36.607] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:38:36.628] Read Success [2025-09-24 14:38:36.628] Verifying certificate... [2025-09-24 14:38:36.883] Verified OK [2025-09-24 14:38:36.899] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:38:38.610] Verified OK [2025-09-24 14:38:38.610] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:38:39.261] Verified OK [2025-09-24 14:38:39.261] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:38:41.803] fs.protected_hardlinks = 1 [2025-09-24 14:38:41.818] fs.protected_symlinks = 1 [2025-09-24 14:38:41.818] kernel.modules_disabled = 1 [2025-09-24 14:38:42.026] [2025-09-24 14:38:42.026] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:38:43.316] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:38:51.035] SBL1:1210.0.1.0 [2025-09-24 14:38:51.067] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:38:52.649] SBL2:1210.0.1.0 [2025-09-24 14:38:52.681] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:38:52.793] j-A [2025-09-24 14:39:00.165] The R5 Autosar Classic is running [2025-09-24 14:39:00.165] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:39:00.165] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:39:00.773] INIT: version 2.96 booting [2025-09-24 14:39:00.884] INIT: Entering runlevel: 5 [2025-09-24 14:39:01.045] mtd32 attached [2025-09-24 14:39:01.045] mtd24 attached [2025-09-24 14:39:01.061] mtd28 attached [2025-09-24 14:39:01.077] ubi0:dml_code is mounted. [2025-09-24 14:39:01.109] RTNETLINK answers: File exists [2025-09-24 14:39:01.146] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:39:01.146] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:39:01.146] ubi2:animations is mounted. [2025-09-24 14:39:01.146] ubi1:textures is mounted. [2025-09-24 14:39:01.146] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:39:01.146] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:39:01.146] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:39:01.168] data.LB_FadeInType0=100 [2025-09-24 14:39:01.168] data.CHLH_FadeInType0=0 [2025-09-24 14:39:01.168] data.WU_FadeInDelay=0 [2025-09-24 14:39:01.168] max_time_out=0 [2025-09-24 14:39:01.168] No splash screen [2025-09-24 14:39:01.168] stop dss Done [2025-09-24 14:39:01.240] /dev/mem opened. [2025-09-24 14:39:01.240] Memory mapped at address 0xffff82306000. [2025-09-24 14:39:01.240] Read at address 0x00600018 (0xffff82306018): 0x00000000 [2025-09-24 14:39:01.240] Write at address 0x00600018 (0xffff82306018): 0x00400040, readback 0x00400040 [2025-09-24 14:39:01.240] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:39:01.256] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:39:01.385] Loaded PowerVR consumer services. [2025-09-24 14:39:01.509] Waiting data available... [2025-09-24 14:39:01.509] 512+0 records in [2025-09-24 14:39:01.509] 512+0 records out [2025-09-24 14:39:01.541] Starting syslogd/klogd: done [2025-09-24 14:39:01.557] DML Start [2025-09-24 14:39:01.749] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:39:01.957] DML res1: 0 [2025-09-24 14:39:02.380] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:39:02.380] Read Success [2025-09-24 14:39:02.380] Verifying certificate... [2025-09-24 14:39:02.604] Verified OK [2025-09-24 14:39:02.620] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:39:04.293] Verified OK [2025-09-24 14:39:04.293] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:39:04.889] Verified OK [2025-09-24 14:39:04.889] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:39:07.607] fs.protected_hardlinks = 1 [2025-09-24 14:39:07.607] fs.protected_symlinks = 1 [2025-09-24 14:39:07.623] kernel.modules_disabled = 1 [2025-09-24 14:39:07.830] [2025-09-24 14:39:07.830] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:39:09.052] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:39:16.798] SBL1:1210.0.1.0 [2025-09-24 14:39:16.830] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:39:18.413] SBL2:1210.0.1.0 [2025-09-24 14:39:18.445] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:39:18.556] j-A [2025-09-24 14:39:25.930] The R5 Autosar Classic is running [2025-09-24 14:39:25.930] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:39:25.930] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:39:26.538] INIT: version 2.96 booting [2025-09-24 14:39:26.633] INIT: Entering runlevel: 5 [2025-09-24 14:39:26.793] mtd28 attached [2025-09-24 14:39:26.810] mtd32 attached [2025-09-24 14:39:26.810] mtd24 attached [2025-09-24 14:39:26.826] ubi0:animations is mounted. [2025-09-24 14:39:26.858] RTNETLINK answers: File exists [2025-09-24 14:39:26.900] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:39:26.900] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:39:26.900] ubi1:dml_code is mounted. [2025-09-24 14:39:26.900] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:39:26.900] ubi2:textures is mounted. [2025-09-24 14:39:26.900] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:39:26.900] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:39:26.921] data.LB_FadeInType0=100 [2025-09-24 14:39:26.921] data.CHLH_FadeInType0=0 [2025-09-24 14:39:26.921] data.WU_FadeInDelay=0 [2025-09-24 14:39:26.921] max_time_out=0 [2025-09-24 14:39:26.921] No splash screen [2025-09-24 14:39:26.921] stop dss Done [2025-09-24 14:39:26.987] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:39:26.987] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:39:26.987] /dev/mem opened. [2025-09-24 14:39:26.987] Memory mapped at address 0xffffa4f19000. [2025-09-24 14:39:26.987] Read at address 0x00600018 (0xffffa4f19018): 0x00000000 [2025-09-24 14:39:26.987] Write at address 0x00600018 (0xffffa4f19018): 0x00400040, readback 0x00400040 [2025-09-24 14:39:27.115] Loaded PowerVR consumer services. [2025-09-24 14:39:27.254] Waiting data available... [2025-09-24 14:39:27.254] 512+0 records in [2025-09-24 14:39:27.254] 512+0 records out [2025-09-24 14:39:27.270] Starting syslogd/klogd: done [2025-09-24 14:39:27.286] DML Start [2025-09-24 14:39:27.447] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:39:27.703] DML res1: 0 [2025-09-24 14:39:28.125] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:39:28.125] Read Success [2025-09-24 14:39:28.125] Verifying certificate... [2025-09-24 14:39:28.398] Verified OK [2025-09-24 14:39:28.429] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:39:30.037] Verified OK [2025-09-24 14:39:30.037] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:39:30.656] Verified OK [2025-09-24 14:39:30.656] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:39:33.326] fs.protected_hardlinks = 1 [2025-09-24 14:39:33.353] fs.protected_symlinks = 1 [2025-09-24 14:39:33.353] kernel.modules_disabled = 1 [2025-09-24 14:39:33.545] [2025-09-24 14:39:33.545] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:39:34.754] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:39:42.551] SBL1:1210.0.1.0 [2025-09-24 14:39:42.599] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:39:44.166] SBL2:1210.0.1.0 [2025-09-24 14:39:44.214] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:39:44.310] j-A [2025-09-24 14:39:51.664] The R5 Autosar Classic is running [2025-09-24 14:39:51.688] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:39:51.688] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:39:52.295] INIT: version 2.96 booting [2025-09-24 14:39:52.407] INIT: Entering runlevel: 5 [2025-09-24 14:39:52.567] mtd28 attached [2025-09-24 14:39:52.583] mtd24 attached [2025-09-24 14:39:52.583] mtd32 attached [2025-09-24 14:39:52.631] RTNETLINK answers: File exists [2025-09-24 14:39:52.631] ubi0:animations is mounted. [2025-09-24 14:39:52.702] ubi1:textures is mounted. [2025-09-24 14:39:52.702] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:39:52.702] ubi2:dml_code is mounted. [2025-09-24 14:39:52.702] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:39:52.702] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:39:52.702] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:39:52.702] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:39:52.702] data.LB_FadeInType0=100 [2025-09-24 14:39:52.702] data.CHLH_FadeInType0=0 [2025-09-24 14:39:52.702] data.WU_FadeInDelay=0 [2025-09-24 14:39:52.702] max_time_out=0 [2025-09-24 14:39:52.702] No splash screen [2025-09-24 14:39:52.702] stop dss Done [2025-09-24 14:39:52.734] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:39:52.775] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:39:52.775] /dev/mem opened. [2025-09-24 14:39:52.775] Memory mapped at address 0xffffab716000. [2025-09-24 14:39:52.775] Read at address 0x00600018 (0xffffab716018): 0x00000000 [2025-09-24 14:39:52.775] Write at address 0x00600018 (0xffffab716018): 0x00400040, readback 0x00400040 [2025-09-24 14:39:53.000] Loaded PowerVR consumer services. [2025-09-24 14:39:53.047] 512+0 records in [2025-09-24 14:39:53.047] 512+0 records out [2025-09-24 14:39:53.047] Waiting data available... [2025-09-24 14:39:53.079] Starting syslogd/klogd: done [2025-09-24 14:39:53.095] DML Start [2025-09-24 14:39:53.271] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:39:53.511] DML res1: 0 [2025-09-24 14:39:53.999] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:39:53.999] Read Success [2025-09-24 14:39:53.999] Verifying certificate... [2025-09-24 14:39:54.286] Verified OK [2025-09-24 14:39:54.302] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:39:55.941] Verified OK [2025-09-24 14:39:55.941] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:39:56.591] Verified OK [2025-09-24 14:39:56.591] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:39:59.277] fs.protected_hardlinks = 1 [2025-09-24 14:39:59.293] fs.protected_symlinks = 1 [2025-09-24 14:39:59.293] kernel.modules_disabled = 1 [2025-09-24 14:39:59.500] [2025-09-24 14:39:59.500] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:40:00.604] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:40:08.297] SBL1:1210.0.1.0 [2025-09-24 14:40:08.328] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:40:09.911] SBL2:1210.0.1.0 [2025-09-24 14:40:09.943] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:40:10.055] j-A [2025-09-24 14:40:17.424] The R5 Autosar Classic is running [2025-09-24 14:40:17.424] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:40:17.424] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:40:18.031] INIT: version 2.96 booting [2025-09-24 14:40:18.143] INIT: Entering runlevel: 5 [2025-09-24 14:40:18.287] mtd24 attached [2025-09-24 14:40:18.303] mtd28 attached [2025-09-24 14:40:18.319] mtd32 attached [2025-09-24 14:40:18.367] RTNETLINK answers: File exists [2025-09-24 14:40:18.367] ubi0:textures is mounted. [2025-09-24 14:40:18.426] ubi1:animations is mounted. [2025-09-24 14:40:18.426] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:40:18.426] ubi2:dml_code is mounted. [2025-09-24 14:40:18.426] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:40:18.426] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:40:18.426] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:40:18.426] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:40:18.426] data.LB_FadeInType0=100 [2025-09-24 14:40:18.426] data.CHLH_FadeInType0=0 [2025-09-24 14:40:18.426] data.WU_FadeInDelay=0 [2025-09-24 14:40:18.426] max_time_out=0 [2025-09-24 14:40:18.426] No splash screen [2025-09-24 14:40:18.426] stop dss Done [2025-09-24 14:40:18.499] /dev/mem opened. [2025-09-24 14:40:18.499] Memory mapped at address 0xffff94ab7000. [2025-09-24 14:40:18.499] Read at address 0x00600018 (0xffff94ab7018): 0x00000000 [2025-09-24 14:40:18.499] Write at address 0x00600018 (0xffff94ab7018): 0x00400040, readback 0x00400040 [2025-09-24 14:40:18.499] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:40:18.499] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:40:18.594] Loaded PowerVR consumer services. [2025-09-24 14:40:18.738] Waiting data available... [2025-09-24 14:40:18.754] 512+0 records in [2025-09-24 14:40:18.754] 512+0 records out [2025-09-24 14:40:18.801] Starting syslogd/klogd: done [2025-09-24 14:40:18.817] DML Start [2025-09-24 14:40:19.010] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:40:19.234] DML res1: 0 [2025-09-24 14:40:19.675] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:40:19.675] Read Success [2025-09-24 14:40:19.675] Verifying certificate... [2025-09-24 14:40:19.963] Verified OK [2025-09-24 14:40:19.963] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:40:21.626] Verified OK [2025-09-24 14:40:21.626] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:40:22.202] Verified OK [2025-09-24 14:40:22.202] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:40:24.760] fs.protected_hardlinks = 1 [2025-09-24 14:40:24.789] fs.protected_symlinks = 1 [2025-09-24 14:40:24.789] kernel.modules_disabled = 1 [2025-09-24 14:40:24.981] [2025-09-24 14:40:24.981] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:40:26.301] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:40:34.030] SBL1:1210.0.1.0 [2025-09-24 14:40:34.062] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:40:35.645] SBL2:1210.0.1.0 [2025-09-24 14:40:35.676] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:40:35.789] j-A [2025-09-24 14:40:43.158] The R5 Autosar Classic is running [2025-09-24 14:40:43.158] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:40:43.158] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:40:43.766] INIT: version 2.96 booting [2025-09-24 14:40:43.877] INIT: Entering runlevel: 5 [2025-09-24 14:40:44.021] mtd24 attached [2025-09-24 14:40:44.037] mtd28 attached [2025-09-24 14:40:44.053] mtd32 attached [2025-09-24 14:40:44.101] RTNETLINK answers: File exists [2025-09-24 14:40:44.101] ubi0:textures is mounted. [2025-09-24 14:40:44.157] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:40:44.157] ubi2:dml_code is mounted. [2025-09-24 14:40:44.157] ubi1:animations is mounted. [2025-09-24 14:40:44.157] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:40:44.157] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:40:44.157] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:40:44.157] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:40:44.157] data.LB_FadeInType0=100 [2025-09-24 14:40:44.157] data.CHLH_FadeInType0=0 [2025-09-24 14:40:44.157] data.WU_FadeInDelay=0 [2025-09-24 14:40:44.157] max_time_out=0 [2025-09-24 14:40:44.157] No splash screen [2025-09-24 14:40:44.157] stop dss Done [2025-09-24 14:40:44.188] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:40:44.233] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:40:44.233] /dev/mem opened. [2025-09-24 14:40:44.233] Memory mapped at address 0xffff8c0ec000. [2025-09-24 14:40:44.233] Read at address 0x00600018 (0xffff8c0ec018): 0x00000000 [2025-09-24 14:40:44.233] Write at address 0x00600018 (0xffff8c0ec018): 0x00400040, readback 0x00400040 [2025-09-24 14:40:44.377] Loaded PowerVR consumer services. [2025-09-24 14:40:44.473] Waiting data available... [2025-09-24 14:40:44.489] 512+0 records in [2025-09-24 14:40:44.489] 512+0 records out [2025-09-24 14:40:44.537] Starting syslogd/klogd: done [2025-09-24 14:40:44.553] DML Start [2025-09-24 14:40:44.696] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:40:44.936] DML res1: 0 [2025-09-24 14:40:45.398] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:40:45.398] Read Success [2025-09-24 14:40:45.398] Verifying certificate... [2025-09-24 14:40:45.654] Verified OK [2025-09-24 14:40:45.670] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:40:47.329] Verified OK [2025-09-24 14:40:47.329] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:40:47.982] Verified OK [2025-09-24 14:40:47.982] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:40:50.604] fs.protected_hardlinks = 1 [2025-09-24 14:40:50.604] fs.protected_symlinks = 1 [2025-09-24 14:40:50.620] kernel.modules_disabled = 1 [2025-09-24 14:40:50.812] [2025-09-24 14:40:50.812] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:40:52.004] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:40:59.765] SBL1:1210.0.1.0 [2025-09-24 14:40:59.797] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:41:01.379] SBL2:1210.0.1.0 [2025-09-24 14:41:01.411] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:41:01.524] j-A [2025-09-24 14:41:08.895] The R5 Autosar Classic is running [2025-09-24 14:41:08.895] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:41:08.895] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:41:09.502] INIT: version 2.96 booting [2025-09-24 14:41:09.615] INIT: Entering runlevel: 5 [2025-09-24 14:41:09.758] mtd32 attached [2025-09-24 14:41:09.774] mtd24 attached [2025-09-24 14:41:09.790] mtd28 attached [2025-09-24 14:41:09.822] ubi0:dml_code is mounted. [2025-09-24 14:41:09.874] RTNETLINK answers: File exists [2025-09-24 14:41:09.874] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:41:09.874] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:41:09.874] ubi1:textures is mounted. [2025-09-24 14:41:09.874] ubi2:animations is mounted. [2025-09-24 14:41:09.874] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:41:09.874] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:41:09.874] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:41:09.874] data.LB_FadeInType0=100 [2025-09-24 14:41:09.895] data.CHLH_FadeInType0=0 [2025-09-24 14:41:09.895] data.WU_FadeInDelay=0 [2025-09-24 14:41:09.895] max_time_out=0 [2025-09-24 14:41:09.895] No splash screen [2025-09-24 14:41:09.895] stop dss Done [2025-09-24 14:41:09.927] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:41:09.927] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:41:09.979] /dev/mem opened. [2025-09-24 14:41:09.979] Memory mapped at address 0xffff8e96e000. [2025-09-24 14:41:09.979] Read at address 0x00600018 (0xffff8e96e018): 0x00000000 [2025-09-24 14:41:09.979] Write at address 0x00600018 (0xffff8e96e018): 0x00400040, readback 0x00400040 [2025-09-24 14:41:10.090] Loaded PowerVR consumer services. [2025-09-24 14:41:10.227] 512+0 records in [2025-09-24 14:41:10.227] 512+0 records out [2025-09-24 14:41:10.227] Waiting data available... [2025-09-24 14:41:10.275] Starting syslogd/klogd: done [2025-09-24 14:41:10.291] DML Start [2025-09-24 14:41:10.483] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:41:10.723] DML res1: 0 [2025-09-24 14:41:11.091] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:41:11.112] Read Success [2025-09-24 14:41:11.112] Verifying certificate... [2025-09-24 14:41:11.367] Verified OK [2025-09-24 14:41:11.383] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:41:13.031] Verified OK [2025-09-24 14:41:13.031] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:41:13.731] Verified OK [2025-09-24 14:41:13.731] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:41:16.368] fs.protected_hardlinks = 1 [2025-09-24 14:41:16.368] fs.protected_symlinks = 1 [2025-09-24 14:41:16.368] kernel.modules_disabled = 1 [2025-09-24 14:41:16.543] [2025-09-24 14:41:16.543] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:41:17.795] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:41:25.489] SBL1:1210.0.1.0 [2025-09-24 14:41:25.537] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:41:27.104] SBL2:1210.0.1.0 [2025-09-24 14:41:27.152] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:41:27.248] j-A [2025-09-24 14:41:34.601] The R5 Autosar Classic is running [2025-09-24 14:41:34.625] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:41:34.625] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:41:35.233] INIT: version 2.96 booting [2025-09-24 14:41:35.344] INIT: Entering runlevel: 5 [2025-09-24 14:41:35.505] mtd32 attached [2025-09-24 14:41:35.505] mtd28 attached [2025-09-24 14:41:35.521] mtd24 attached [2025-09-24 14:41:35.537] ubi0:dml_code is mounted. [2025-09-24 14:41:35.569] RTNETLINK answers: File exists [2025-09-24 14:41:35.604] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:41:35.604] ubi2:textures is mounted. [2025-09-24 14:41:35.604] ubi1:animations is mounted. [2025-09-24 14:41:35.604] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:41:35.604] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:41:35.604] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:41:35.604] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:41:35.625] data.LB_FadeInType0=100 [2025-09-24 14:41:35.625] data.CHLH_FadeInType0=0 [2025-09-24 14:41:35.625] data.WU_FadeInDelay=0 [2025-09-24 14:41:35.625] max_time_out=0 [2025-09-24 14:41:35.625] No splash screen [2025-09-24 14:41:35.625] stop dss Done [2025-09-24 14:41:35.657] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:41:35.702] /dev/mem opened. [2025-09-24 14:41:35.702] Memory mapped at address 0xffff9d686000. [2025-09-24 14:41:35.702] Read at address 0x00600018 (0xffff9d686018): 0x00000000 [2025-09-24 14:41:35.702] Write at address 0x00600018 (0xffff9d686018): 0x00400040, readback 0x00400040 [2025-09-24 14:41:35.702] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:41:35.878] Loaded PowerVR consumer services. [2025-09-24 14:41:35.985] 512+0 records in [2025-09-24 14:41:35.985] 512+0 records out [2025-09-24 14:41:35.985] Waiting data available... [2025-09-24 14:41:36.017] Starting syslogd/klogd: done [2025-09-24 14:41:36.049] DML Start [2025-09-24 14:41:36.208] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:41:36.432] DML res1: 0 [2025-09-24 14:41:36.905] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:41:36.905] Read Success [2025-09-24 14:41:36.905] Verifying certificate... [2025-09-24 14:41:37.209] Verified OK [2025-09-24 14:41:37.224] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:41:38.911] Verified OK [2025-09-24 14:41:38.911] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:41:39.516] Verified OK [2025-09-24 14:41:39.516] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:41:42.043] fs.protected_hardlinks = 1 [2025-09-24 14:41:42.043] fs.protected_symlinks = 1 [2025-09-24 14:41:42.059] kernel.modules_disabled = 1 [2025-09-24 14:41:42.250] [2025-09-24 14:41:42.250] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:41:43.546] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:41:51.214] SBL1:1210.0.1.0 [2025-09-24 14:41:51.246] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:41:52.829] SBL2:1210.0.1.0 [2025-09-24 14:41:52.860] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:41:52.973] j-A [2025-09-24 14:42:00.347] The R5 Autosar Classic is running [2025-09-24 14:42:00.347] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:42:00.347] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:42:00.955] INIT: version 2.96 booting [2025-09-24 14:42:01.067] INIT: Entering runlevel: 5 [2025-09-24 14:42:01.210] mtd24 attached [2025-09-24 14:42:01.226] mtd32 attached [2025-09-24 14:42:01.258] mtd28 attached [2025-09-24 14:42:01.258] ubi0:textures is mounted. [2025-09-24 14:42:01.290] ubi1:dml_code is mounted. [2025-09-24 14:42:01.290] RTNETLINK answers: File exists [2025-09-24 14:42:01.347] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:42:01.347] ubi2:animations is mounted. [2025-09-24 14:42:01.347] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:42:01.347] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:42:01.347] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:42:01.347] data.LB_FadeInType0=100 [2025-09-24 14:42:01.347] data.CHLH_FadeInType0=0 [2025-09-24 14:42:01.347] data.WU_FadeInDelay=0 [2025-09-24 14:42:01.347] max_time_out=0 [2025-09-24 14:42:01.347] No splash screen [2025-09-24 14:42:01.347] stop dss Done [2025-09-24 14:42:01.347] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:42:01.417] /dev/mem opened. [2025-09-24 14:42:01.417] Memory mapped at address 0xffffb12e0000. [2025-09-24 14:42:01.417] Read at address 0x00600018 (0xffffb12e0018): 0x00000000 [2025-09-24 14:42:01.417] Write at address 0x00600018 (0xffffb12e0018): 0x00400040, readback 0x00400040 [2025-09-24 14:42:01.417] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:42:01.433] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:42:01.513] Loaded PowerVR consumer services. [2025-09-24 14:42:01.681] Waiting data available... [2025-09-24 14:42:01.681] 512+0 records in [2025-09-24 14:42:01.681] 512+0 records out [2025-09-24 14:42:01.713] Starting syslogd/klogd: done [2025-09-24 14:42:01.729] DML Start [2025-09-24 14:42:01.920] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:42:02.145] DML res1: 0 [2025-09-24 14:42:02.573] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:42:02.573] Read Success [2025-09-24 14:42:02.573] Verifying certificate... [2025-09-24 14:42:02.797] Verified OK [2025-09-24 14:42:02.813] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:42:04.503] Verified OK [2025-09-24 14:42:04.503] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:42:05.103] Verified OK [2025-09-24 14:42:05.103] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:42:07.789] fs.protected_hardlinks = 1 [2025-09-24 14:42:07.789] fs.protected_symlinks = 1 [2025-09-24 14:42:07.805] kernel.modules_disabled = 1 [2025-09-24 14:42:07.980] [2025-09-24 14:42:07.980] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:42:09.175] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:42:16.938] SBL1:1210.0.1.0 [2025-09-24 14:42:16.969] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:42:18.552] SBL2:1210.0.1.0 [2025-09-24 14:42:18.584] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:42:18.695] j-A [2025-09-24 14:42:26.070] The R5 Autosar Classic is running [2025-09-24 14:42:26.070] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:42:26.070] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:42:26.677] INIT: version 2.96 booting [2025-09-24 14:42:26.788] INIT: Entering runlevel: 5 [2025-09-24 14:42:26.932] mtd32 attached [2025-09-24 14:42:26.948] mtd24 attached [2025-09-24 14:42:26.964] mtd28 attached [2025-09-24 14:42:26.996] ubi0:dml_code is mounted. [2025-09-24 14:42:27.047] RTNETLINK answers: File exists [2025-09-24 14:42:27.047] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:42:27.047] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:42:27.047] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:42:27.047] ubi1:textures is mounted. [2025-09-24 14:42:27.047] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:42:27.047] ubi2:animations is mounted. [2025-09-24 14:42:27.047] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:42:27.073] data.LB_FadeInType0=100 [2025-09-24 14:42:27.073] data.CHLH_FadeInType0=0 [2025-09-24 14:42:27.073] data.WU_FadeInDelay=0 [2025-09-24 14:42:27.073] max_time_out=0 [2025-09-24 14:42:27.073] No splash screen [2025-09-24 14:42:27.073] stop dss Done [2025-09-24 14:42:27.100] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:42:27.100] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:42:27.132] /dev/mem opened. [2025-09-24 14:42:27.132] Memory mapped at address 0xffffb11e3000. [2025-09-24 14:42:27.158] Read at address 0x00600018 (0xffffb11e3018): 0x00000000 [2025-09-24 14:42:27.158] Write at address 0x00600018 (0xffffb11e3018): 0x00400040, readback 0x00400040 [2025-09-24 14:42:27.223] Loaded PowerVR consumer services. [2025-09-24 14:42:27.397] 512+0 records in [2025-09-24 14:42:27.397] 512+0 records out [2025-09-24 14:42:27.397] Waiting data available... [2025-09-24 14:42:27.429] Starting syslogd/klogd: done [2025-09-24 14:42:27.445] DML Start [2025-09-24 14:42:27.605] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:42:27.829] DML res1: 0 [2025-09-24 14:42:28.315] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:42:28.315] Read Success [2025-09-24 14:42:28.315] Verifying certificate... [2025-09-24 14:42:28.555] Verified OK [2025-09-24 14:42:28.571] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:42:30.344] Verified OK [2025-09-24 14:42:30.344] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:42:30.948] Verified OK [2025-09-24 14:42:30.948] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:42:33.474] fs.protected_hardlinks = 1 [2025-09-24 14:42:33.474] fs.protected_symlinks = 1 [2025-09-24 14:42:33.490] kernel.modules_disabled = 1 [2025-09-24 14:42:33.682] [2025-09-24 14:42:33.682] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:42:34.913] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:42:42.674] SBL1:1210.0.1.0 [2025-09-24 14:42:42.721] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:42:44.289] SBL2:1210.0.1.0 [2025-09-24 14:42:44.337] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:42:44.433] j-A [2025-09-24 14:42:51.786] The R5 Autosar Classic is running [2025-09-24 14:42:51.811] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:42:51.811] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:42:52.418] INIT: version 2.96 booting [2025-09-24 14:42:52.531] INIT: Entering runlevel: 5 [2025-09-24 14:42:52.675] mtd28 attached [2025-09-24 14:42:52.691] mtd24 attached [2025-09-24 14:42:52.691] mtd32 attached [2025-09-24 14:42:52.810] RTNETLINK answers: File exists [2025-09-24 14:42:52.810] ubi0:animations is mounted. [2025-09-24 14:42:52.810] ubi1:textures is mounted. [2025-09-24 14:42:52.810] ubi2:dml_code is mounted. [2025-09-24 14:42:52.810] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:42:52.810] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:42:52.810] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:42:52.810] data.LB_FadeInType0=100 [2025-09-24 14:42:52.810] data.CHLH_FadeInType0=0 [2025-09-24 14:42:52.810] data.WU_FadeInDelay=0 [2025-09-24 14:42:52.810] max_time_out=0 [2025-09-24 14:42:52.810] No splash screen [2025-09-24 14:42:52.810] stop dss Done [2025-09-24 14:42:52.810] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:42:52.810] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:42:52.871] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:42:52.871] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:42:52.871] /dev/mem opened. [2025-09-24 14:42:52.871] Memory mapped at address 0xffffaf069000. [2025-09-24 14:42:52.871] Read at address 0x00600018 (0xffffaf069018): 0x00000000 [2025-09-24 14:42:52.871] Write at address 0x00600018 (0xffffaf069018): 0x00400040, readback 0x00400040 [2025-09-24 14:42:53.127] Loaded PowerVR consumer services. [2025-09-24 14:42:53.143] Waiting data available... [2025-09-24 14:42:53.174] 512+0 records in [2025-09-24 14:42:53.174] 512+0 records out [2025-09-24 14:42:53.222] Starting syslogd/klogd: done [2025-09-24 14:42:53.238] DML Start [2025-09-24 14:42:53.382] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:42:53.638] DML res1: 0 [2025-09-24 14:42:54.095] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:42:54.095] Read Success [2025-09-24 14:42:54.095] Verifying certificate... [2025-09-24 14:42:54.383] Verified OK [2025-09-24 14:42:54.399] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:42:56.119] Verified OK [2025-09-24 14:42:56.119] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:42:56.659] Verified OK [2025-09-24 14:42:56.659] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:42:59.073] fs.protected_hardlinks = 1 [2025-09-24 14:42:59.089] fs.protected_symlinks = 1 [2025-09-24 14:42:59.089] kernel.modules_disabled = 1 [2025-09-24 14:42:59.280] [2025-09-24 14:42:59.280] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:43:00.758] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:43:08.422] SBL1:1210.0.1.0 [2025-09-24 14:43:08.454] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:43:10.036] SBL2:1210.0.1.0 [2025-09-24 14:43:10.068] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:43:10.181] j-A [2025-09-24 14:43:17.551] The R5 Autosar Classic is running [2025-09-24 14:43:17.551] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:43:17.551] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:43:18.159] INIT: version 2.96 booting [2025-09-24 14:43:18.270] INIT: Entering runlevel: 5 [2025-09-24 14:43:18.414] mtd24 attached [2025-09-24 14:43:18.430] mtd32 attached [2025-09-24 14:43:18.446] mtd28 attached [2025-09-24 14:43:18.551] ubi0:textures is mounted. [2025-09-24 14:43:18.551] RTNETLINK answers: File exists [2025-09-24 14:43:18.551] ubi1:dml_code is mounted. [2025-09-24 14:43:18.551] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:43:18.551] ubi2:animations is mounted. [2025-09-24 14:43:18.551] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:43:18.551] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:43:18.551] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:43:18.551] data.LB_FadeInType0=100 [2025-09-24 14:43:18.551] data.CHLH_FadeInType0=0 [2025-09-24 14:43:18.551] data.WU_FadeInDelay=0 [2025-09-24 14:43:18.551] max_time_out=0 [2025-09-24 14:43:18.551] No splash screen [2025-09-24 14:43:18.551] stop dss Done [2025-09-24 14:43:18.551] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:43:18.599] /dev/mem opened. [2025-09-24 14:43:18.599] Memory mapped at address 0xffffad328000. [2025-09-24 14:43:18.625] Read at address 0x00600018 (0xffffad328018): 0x00000000 [2025-09-24 14:43:18.625] Write at address 0x00600018 (0xffffad328018): 0x00400040, readback 0x00400040 [2025-09-24 14:43:18.641] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:43:18.657] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:43:18.865] Loaded PowerVR consumer services. [2025-09-24 14:43:18.881] Waiting data available... [2025-09-24 14:43:18.896] 512+0 records in [2025-09-24 14:43:18.896] 512+0 records out [2025-09-24 14:43:18.944] Starting syslogd/klogd: done [2025-09-24 14:43:18.961] DML Start [2025-09-24 14:43:19.121] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:43:19.376] DML res1: 0 [2025-09-24 14:43:19.824] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:43:19.847] Read Success [2025-09-24 14:43:19.848] Verifying certificate... [2025-09-24 14:43:20.136] Verified OK [2025-09-24 14:43:20.152] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:43:21.933] Verified OK [2025-09-24 14:43:21.933] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:43:22.364] Verified OK [2025-09-24 14:43:22.364] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:43:24.666] fs.protected_hardlinks = 1 [2025-09-24 14:43:24.682] fs.protected_symlinks = 1 [2025-09-24 14:43:24.682] kernel.modules_disabled = 1 [2025-09-24 14:43:24.889] [2025-09-24 14:43:24.889] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:43:26.389] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:43:34.132] SBL1:1210.0.1.0 [2025-09-24 14:43:34.180] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:43:35.747] SBL2:1210.0.1.0 [2025-09-24 14:43:35.795] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:43:35.891] j-A [2025-09-24 14:43:43.246] The R5 Autosar Classic is running [2025-09-24 14:43:43.269] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:43:43.270] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:43:43.877] INIT: version 2.96 booting [2025-09-24 14:43:43.988] INIT: Entering runlevel: 5 [2025-09-24 14:43:44.148] mtd28 attached [2025-09-24 14:43:44.148] mtd24 attached [2025-09-24 14:43:44.164] mtd32 attached [2025-09-24 14:43:44.196] ubi0:animations is mounted. [2025-09-24 14:43:44.212] ubi1:textures is mounted. [2025-09-24 14:43:44.212] RTNETLINK answers: File exists [2025-09-24 14:43:44.274] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:43:44.274] ubi2:dml_code is mounted. [2025-09-24 14:43:44.274] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:43:44.274] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:43:44.274] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:43:44.274] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:43:44.274] data.LB_FadeInType0=100 [2025-09-24 14:43:44.274] data.CHLH_FadeInType0=0 [2025-09-24 14:43:44.274] data.WU_FadeInDelay=0 [2025-09-24 14:43:44.274] max_time_out=0 [2025-09-24 14:43:44.274] No splash screen [2025-09-24 14:43:44.274] stop dss Done [2025-09-24 14:43:44.363] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:43:44.363] /dev/mem opened. [2025-09-24 14:43:44.363] Memory mapped at address 0xffff96014000. [2025-09-24 14:43:44.363] Read at address 0x00600018 (0xffff96014018): 0x00000000 [2025-09-24 14:43:44.363] Write at address 0x00600018 (0xffff96014018): 0x00400040, readback 0x00400040 [2025-09-24 14:43:44.363] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:43:44.459] Loaded PowerVR consumer services. [2025-09-24 14:43:44.603] Waiting data available... [2025-09-24 14:43:44.619] 512+0 records in [2025-09-24 14:43:44.619] 512+0 records out [2025-09-24 14:43:44.650] Starting syslogd/klogd: done [2025-09-24 14:43:44.666] DML Start [2025-09-24 14:43:44.859] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:43:45.083] DML res1: 0 [2025-09-24 14:43:45.529] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:43:45.529] Read Success [2025-09-24 14:43:45.529] Verifying certificate... [2025-09-24 14:43:45.801] Verified OK [2025-09-24 14:43:45.817] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:43:47.540] Verified OK [2025-09-24 14:43:47.540] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:43:48.177] Verified OK [2025-09-24 14:43:48.177] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:43:50.767] fs.protected_hardlinks = 1 [2025-09-24 14:43:50.767] fs.protected_symlinks = 1 [2025-09-24 14:43:50.767] kernel.modules_disabled = 1 [2025-09-24 14:43:50.975] [2025-09-24 14:43:50.975] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:43:52.171] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:43:59.858] SBL1:1210.0.1.0 [2025-09-24 14:43:59.890] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:44:01.472] SBL2:1210.0.1.0 [2025-09-24 14:44:01.504] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:44:01.616] j-A [2025-09-24 14:44:08.988] The R5 Autosar Classic is running [2025-09-24 14:44:08.988] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:44:08.988] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:44:09.595] INIT: version 2.96 booting [2025-09-24 14:44:09.708] INIT: Entering runlevel: 5 [2025-09-24 14:44:09.851] mtd24 attached [2025-09-24 14:44:09.868] mtd32 attached [2025-09-24 14:44:09.883] mtd28 attached [2025-09-24 14:44:09.946] RTNETLINK answers: File exists [2025-09-24 14:44:09.946] ubi0:textures is mounted. [2025-09-24 14:44:09.946] ubi2:animations is mounted. [2025-09-24 14:44:09.946] ubi1:dml_code is mounted. [2025-09-24 14:44:09.946] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:44:09.992] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:44:09.992] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:44:09.992] data.LB_FadeInType0=100 [2025-09-24 14:44:09.992] data.CHLH_FadeInType0=0 [2025-09-24 14:44:09.992] data.WU_FadeInDelay=0 [2025-09-24 14:44:09.992] max_time_out=0 [2025-09-24 14:44:09.992] No splash screen [2025-09-24 14:44:09.992] stop dss Done [2025-09-24 14:44:09.992] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:44:09.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:44:10.064] /dev/mem opened. [2025-09-24 14:44:10.064] Memory mapped at address 0xffffbe342000. [2025-09-24 14:44:10.064] Read at address 0x00600018 (0xffffbe342018): 0x00000000 [2025-09-24 14:44:10.064] Write at address 0x00600018 (0xffffbe342018): 0x00400040, readback 0x00400040 [2025-09-24 14:44:10.064] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:44:10.096] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:44:10.193] Loaded PowerVR consumer services. [2025-09-24 14:44:10.336] Waiting data available... [2025-09-24 14:44:10.336] 512+0 records in [2025-09-24 14:44:10.336] 512+0 records out [2025-09-24 14:44:10.383] Starting syslogd/klogd: done [2025-09-24 14:44:10.399] DML Start [2025-09-24 14:44:10.575] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:44:10.815] DML res1: 0 [2025-09-24 14:44:11.167] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:44:11.188] Read Success [2025-09-24 14:44:11.188] Verifying certificate... [2025-09-24 14:44:11.459] Verified OK [2025-09-24 14:44:11.475] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:44:13.185] Verified OK [2025-09-24 14:44:13.185] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:44:13.690] Verified OK [2025-09-24 14:44:13.690] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:44:16.167] fs.protected_hardlinks = 1 [2025-09-24 14:44:16.167] fs.protected_symlinks = 1 [2025-09-24 14:44:16.167] kernel.modules_disabled = 1 [2025-09-24 14:44:16.343] [2025-09-24 14:44:16.343] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:44:17.900] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:44:25.594] SBL1:1210.0.1.0 [2025-09-24 14:44:25.642] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:44:27.208] SBL2:1210.0.1.0 [2025-09-24 14:44:27.256] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:44:27.353] j-A [2025-09-24 14:44:34.707] The R5 Autosar Classic is running [2025-09-24 14:44:34.707] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:44:34.728] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:44:35.336] INIT: version 2.96 booting [2025-09-24 14:44:35.448] INIT: Entering runlevel: 5 [2025-09-24 14:44:35.592] mtd28 attached [2025-09-24 14:44:35.608] mtd24 attached [2025-09-24 14:44:35.624] mtd32 attached [2025-09-24 14:44:35.640] ubi0:animations is mounted. [2025-09-24 14:44:35.672] RTNETLINK answers: File exists [2025-09-24 14:44:35.672] ubi1:textures is mounted. [2025-09-24 14:44:35.731] ubi2:dml_code is mounted. [2025-09-24 14:44:35.731] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:44:35.731] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:44:35.731] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:44:35.731] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:44:35.731] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:44:35.731] data.LB_FadeInType0=100 [2025-09-24 14:44:35.731] data.CHLH_FadeInType0=0 [2025-09-24 14:44:35.731] data.WU_FadeInDelay=0 [2025-09-24 14:44:35.731] max_time_out=0 [2025-09-24 14:44:35.731] No splash screen [2025-09-24 14:44:35.731] stop dss Done [2025-09-24 14:44:35.804] /dev/mem opened. [2025-09-24 14:44:35.804] Memory mapped at address 0xffff93e23000. [2025-09-24 14:44:35.804] Read at address 0x00600018 (0xffff93e23018): 0x00000000 [2025-09-24 14:44:35.804] Write at address 0x00600018 (0xffff93e23018): 0x00400040, readback 0x00400040 [2025-09-24 14:44:35.804] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:44:35.820] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:44:35.915] Loaded PowerVR consumer services. [2025-09-24 14:44:36.074] Waiting data available... [2025-09-24 14:44:36.074] 512+0 records in [2025-09-24 14:44:36.074] 512+0 records out [2025-09-24 14:44:36.106] Starting syslogd/klogd: done [2025-09-24 14:44:36.138] DML Start [2025-09-24 14:44:36.330] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:44:36.554] DML res1: 0 [2025-09-24 14:44:37.009] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:44:37.009] Read Success [2025-09-24 14:44:37.009] Verifying certificate... [2025-09-24 14:44:37.248] Verified OK [2025-09-24 14:44:37.264] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:44:38.990] Verified OK [2025-09-24 14:44:38.990] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:44:39.582] Verified OK [2025-09-24 14:44:39.582] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:44:42.265] fs.protected_hardlinks = 1 [2025-09-24 14:44:42.265] fs.protected_symlinks = 1 [2025-09-24 14:44:42.265] kernel.modules_disabled = 1 [2025-09-24 14:44:42.441] [2025-09-24 14:44:42.457] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:44:43.624] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:44:51.327] SBL1:1210.0.1.0 [2025-09-24 14:44:51.375] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:44:52.942] SBL2:1210.0.1.0 [2025-09-24 14:44:52.974] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:44:53.086] j-A [2025-09-24 14:45:00.441] The R5 Autosar Classic is running [2025-09-24 14:45:00.441] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:45:00.462] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:45:01.069] INIT: version 2.96 booting [2025-09-24 14:45:01.181] INIT: Entering runlevel: 5 [2025-09-24 14:45:01.341] mtd24 attached [2025-09-24 14:45:01.357] mtd28 attached [2025-09-24 14:45:01.373] mtd32 attached [2025-09-24 14:45:01.456] RTNETLINK answers: File exists [2025-09-24 14:45:01.456] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:45:01.456] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:45:01.456] ubi0:textures is mounted. [2025-09-24 14:45:01.456] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:45:01.456] ubi2:dml_code is mounted. [2025-09-24 14:45:01.456] ubi1:animations is mounted. [2025-09-24 14:45:01.456] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:45:01.456] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:45:01.482] data.LB_FadeInType0=100 [2025-09-24 14:45:01.482] data.CHLH_FadeInType0=0 [2025-09-24 14:45:01.482] data.WU_FadeInDelay=0 [2025-09-24 14:45:01.482] max_time_out=0 [2025-09-24 14:45:01.482] No splash screen [2025-09-24 14:45:01.482] stop dss Done [2025-09-24 14:45:01.498] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:45:01.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:45:01.530] /dev/mem opened. [2025-09-24 14:45:01.562] Memory mapped at address 0xffffb9926000. [2025-09-24 14:45:01.562] Read at address 0x00600018 (0xffffb9926018): 0x00000000 [2025-09-24 14:45:01.562] Write at address 0x00600018 (0xffffb9926018): 0x00400040, readback 0x00400040 [2025-09-24 14:45:01.673] Loaded PowerVR consumer services. [2025-09-24 14:45:01.802] Waiting data available... [2025-09-24 14:45:01.818] 512+0 records in [2025-09-24 14:45:01.818] 512+0 records out [2025-09-24 14:45:01.850] Starting syslogd/klogd: done [2025-09-24 14:45:01.866] DML Start [2025-09-24 14:45:02.041] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:45:02.233] DML res1: 0 [2025-09-24 14:45:02.697] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:45:02.697] Read Success [2025-09-24 14:45:02.712] Verifying certificate... [2025-09-24 14:45:02.937] Verified OK [2025-09-24 14:45:02.937] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:45:04.560] Verified OK [2025-09-24 14:45:04.560] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:45:05.214] Verified OK [2025-09-24 14:45:05.214] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:45:07.980] fs.protected_hardlinks = 1 [2025-09-24 14:45:08.009] fs.protected_symlinks = 1 [2025-09-24 14:45:08.009] kernel.modules_disabled = 1 [2025-09-24 14:45:08.185] [2025-09-24 14:45:08.185] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:45:09.408] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:45:17.056] SBL1:1210.0.1.0 [2025-09-24 14:45:17.103] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:45:18.670] SBL2:1210.0.1.0 [2025-09-24 14:45:18.718] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:45:18.813] j-A [2025-09-24 14:45:26.168] The R5 Autosar Classic is running [2025-09-24 14:45:26.193] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:45:26.193] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:45:26.800] INIT: version 2.96 booting [2025-09-24 14:45:26.913] INIT: Entering runlevel: 5 [2025-09-24 14:45:27.073] mtd28 attached [2025-09-24 14:45:27.073] mtd24 attached [2025-09-24 14:45:27.088] mtd32 attached [2025-09-24 14:45:27.136] ubi0:animations is mounted. [2025-09-24 14:45:27.136] RTNETLINK answers: File exists [2025-09-24 14:45:27.176] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:45:27.176] ubi1:textures is mounted. [2025-09-24 14:45:27.176] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:45:27.176] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:45:27.176] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:45:27.176] ubi2:dml_code is mounted. [2025-09-24 14:45:27.176] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:45:27.192] data.LB_FadeInType0=100 [2025-09-24 14:45:27.192] data.CHLH_FadeInType0=0 [2025-09-24 14:45:27.213] data.WU_FadeInDelay=0 [2025-09-24 14:45:27.213] max_time_out=0 [2025-09-24 14:45:27.213] No splash screen [2025-09-24 14:45:27.213] stop dss Done [2025-09-24 14:45:27.213] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:45:27.229] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:45:27.286] /dev/mem opened. [2025-09-24 14:45:27.286] Memory mapped at address 0xffffb0e85000. [2025-09-24 14:45:27.286] Read at address 0x00600018 (0xffffb0e85018): 0x00000000 [2025-09-24 14:45:27.286] Write at address 0x00600018 (0xffffb0e85018): 0x00400040, readback 0x00400040 [2025-09-24 14:45:27.382] Loaded PowerVR consumer services. [2025-09-24 14:45:27.548] Waiting data available... [2025-09-24 14:45:27.548] 512+0 records in [2025-09-24 14:45:27.548] 512+0 records out [2025-09-24 14:45:27.580] Starting syslogd/klogd: done [2025-09-24 14:45:27.596] DML Start [2025-09-24 14:45:27.756] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:45:27.964] DML res1: 0 [2025-09-24 14:45:28.546] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:45:28.546] Read Success [2025-09-24 14:45:28.546] Verifying certificate... [2025-09-24 14:45:28.785] Verified OK [2025-09-24 14:45:28.801] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:45:30.400] Verified OK [2025-09-24 14:45:30.400] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:45:31.071] Verified OK [2025-09-24 14:45:31.071] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:45:33.645] fs.protected_hardlinks = 1 [2025-09-24 14:45:33.661] fs.protected_symlinks = 1 [2025-09-24 14:45:33.661] kernel.modules_disabled = 1 [2025-09-24 14:45:33.869] [2025-09-24 14:45:33.869] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:45:35.092] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:45:42.803] SBL1:1210.0.1.0 [2025-09-24 14:45:42.851] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:45:44.417] SBL2:1210.0.1.0 [2025-09-24 14:45:44.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:45:44.561] j-A [2025-09-24 14:45:51.915] The R5 Autosar Classic is running [2025-09-24 14:45:51.940] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:45:51.940] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:45:52.548] INIT: version 2.96 booting [2025-09-24 14:45:52.660] INIT: Entering runlevel: 5 [2025-09-24 14:45:52.820] mtd28 attached [2025-09-24 14:45:52.820] mtd24 attached [2025-09-24 14:45:52.836] mtd32 attached [2025-09-24 14:45:52.919] RTNETLINK answers: File exists [2025-09-24 14:45:52.919] ubi0:animations is mounted. [2025-09-24 14:45:52.919] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:45:52.919] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:45:52.919] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:45:52.919] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:45:52.919] ubi1:textures is mounted. [2025-09-24 14:45:52.919] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:45:52.919] ubi2:dml_code is mounted. [2025-09-24 14:45:52.944] data.LB_FadeInType0=100 [2025-09-24 14:45:52.944] data.CHLH_FadeInType0=0 [2025-09-24 14:45:52.944] data.WU_FadeInDelay=0 [2025-09-24 14:45:52.944] max_time_out=0 [2025-09-24 14:45:52.944] No splash screen [2025-09-24 14:45:52.944] stop dss Done [2025-09-24 14:45:52.972] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:45:52.972] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:45:53.022] /dev/mem opened. [2025-09-24 14:45:53.022] Memory mapped at address 0xffff9ead9000. [2025-09-24 14:45:53.022] Read at address 0x00600018 (0xffff9ead9018): 0x00000000 [2025-09-24 14:45:53.022] Write at address 0x00600018 (0xffff9ead9018): 0x00400040, readback 0x00400040 [2025-09-24 14:45:53.101] Loaded PowerVR consumer services. [2025-09-24 14:45:53.278] Waiting data available... [2025-09-24 14:45:53.278] 512+0 records in [2025-09-24 14:45:53.278] 512+0 records out [2025-09-24 14:45:53.326] Starting syslogd/klogd: done [2025-09-24 14:45:53.358] DML Start [2025-09-24 14:45:53.518] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:45:53.742] DML res1: 0 [2025-09-24 14:45:54.237] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:45:54.258] Read Success [2025-09-24 14:45:54.258] Verifying certificate... [2025-09-24 14:45:54.514] Verified OK [2025-09-24 14:45:54.546] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:45:56.174] Verified OK [2025-09-24 14:45:56.174] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:45:56.735] Verified OK [2025-09-24 14:45:56.735] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:45:59.308] fs.protected_hardlinks = 1 [2025-09-24 14:45:59.324] fs.protected_symlinks = 1 [2025-09-24 14:45:59.324] kernel.modules_disabled = 1 [2025-09-24 14:45:59.532] [2025-09-24 14:45:59.532] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:46:00.819] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:46:08.526] SBL1:1210.0.1.0 [2025-09-24 14:46:08.574] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:46:10.140] SBL2:1210.0.1.0 [2025-09-24 14:46:10.171] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:46:10.284] j-A [2025-09-24 14:46:17.638] The R5 Autosar Classic is running [2025-09-24 14:46:17.638] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:46:17.659] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:46:18.266] INIT: version 2.96 booting [2025-09-24 14:46:18.379] INIT: Entering runlevel: 5 [2025-09-24 14:46:18.522] mtd24 attached [2025-09-24 14:46:18.538] mtd28 attached [2025-09-24 14:46:18.554] mtd32 attached [2025-09-24 14:46:18.570] ubi0:textures is mounted. [2025-09-24 14:46:18.602] ubi1:animations is mounted. [2025-09-24 14:46:18.671] RTNETLINK answers: File exists [2025-09-24 14:46:18.671] ubi2:dml_code is mounted. [2025-09-24 14:46:18.671] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:46:18.671] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:46:18.671] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:46:18.671] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:46:18.671] data.LB_FadeInType0=100 [2025-09-24 14:46:18.671] data.CHLH_FadeInType0=0 [2025-09-24 14:46:18.671] data.WU_FadeInDelay=0 [2025-09-24 14:46:18.671] max_time_out=0 [2025-09-24 14:46:18.671] No splash screen [2025-09-24 14:46:18.671] stop dss Done [2025-09-24 14:46:18.671] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:46:18.736] /dev/mem opened. [2025-09-24 14:46:18.736] Memory mapped at address 0xffffac050000. [2025-09-24 14:46:18.736] Read at address 0x00600018 (0xffffac050018): 0x00000000 [2025-09-24 14:46:18.736] Write at address 0x00600018 (0xffffac050018): 0x00400040, readback 0x00400040 [2025-09-24 14:46:18.736] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:46:18.783] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:46:18.911] Loaded PowerVR consumer services. [2025-09-24 14:46:19.008] Waiting data available... [2025-09-24 14:46:19.024] 512+0 records in [2025-09-24 14:46:19.024] 512+0 records out [2025-09-24 14:46:19.071] Starting syslogd/klogd: done [2025-09-24 14:46:19.087] DML Start [2025-09-24 14:46:19.295] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:46:19.487] DML res1: 0 [2025-09-24 14:46:19.903] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:46:19.924] Read Success [2025-09-24 14:46:19.924] Verifying certificate... [2025-09-24 14:46:20.195] Verified OK [2025-09-24 14:46:20.211] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:46:21.906] Verified OK [2025-09-24 14:46:21.906] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:46:22.538] Verified OK [2025-09-24 14:46:22.538] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:46:25.096] fs.protected_hardlinks = 1 [2025-09-24 14:46:25.096] fs.protected_symlinks = 1 [2025-09-24 14:46:25.112] kernel.modules_disabled = 1 [2025-09-24 14:46:25.304] [2025-09-24 14:46:25.304] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:46:26.502] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:46:34.245] SBL1:1210.0.1.0 [2025-09-24 14:46:34.293] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:46:35.859] SBL2:1210.0.1.0 [2025-09-24 14:46:35.907] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:46:36.019] j-A [2025-09-24 14:46:43.357] The R5 Autosar Classic is running [2025-09-24 14:46:43.382] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:46:43.382] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:46:43.989] INIT: version 2.96 booting [2025-09-24 14:46:44.102] INIT: Entering runlevel: 5 [2025-09-24 14:46:44.262] mtd32 attached [2025-09-24 14:46:44.262] mtd24 attached [2025-09-24 14:46:44.277] mtd28 attached [2025-09-24 14:46:44.326] RTNETLINK answers: File exists [2025-09-24 14:46:44.326] ubi0:dml_code is mounted. [2025-09-24 14:46:44.365] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:46:44.365] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:46:44.365] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:46:44.365] ubi1:textures is mounted. [2025-09-24 14:46:44.365] ubi2:animations is mounted. [2025-09-24 14:46:44.365] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:46:44.365] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:46:44.391] data.LB_FadeInType0=100 [2025-09-24 14:46:44.391] data.CHLH_FadeInType0=0 [2025-09-24 14:46:44.391] data.WU_FadeInDelay=0 [2025-09-24 14:46:44.391] max_time_out=0 [2025-09-24 14:46:44.391] No splash screen [2025-09-24 14:46:44.391] stop dss Done [2025-09-24 14:46:44.407] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:46:44.423] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:46:44.471] /dev/mem opened. [2025-09-24 14:46:44.471] Memory mapped at address 0xffffa4b2e000. [2025-09-24 14:46:44.471] Read at address 0x00600018 (0xffffa4b2e018): 0x00000000 [2025-09-24 14:46:44.471] Write at address 0x00600018 (0xffffa4b2e018): 0x00400040, readback 0x00400040 [2025-09-24 14:46:44.583] Loaded PowerVR consumer services. [2025-09-24 14:46:44.711] Waiting data available... [2025-09-24 14:46:44.711] 512+0 records in [2025-09-24 14:46:44.727] 512+0 records out [2025-09-24 14:46:44.743] Starting syslogd/klogd: done [2025-09-24 14:46:44.760] DML Start [2025-09-24 14:46:44.903] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:46:45.095] DML res1: 0 [2025-09-24 14:46:45.667] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:46:45.667] Read Success [2025-09-24 14:46:45.667] Verifying certificate... [2025-09-24 14:46:45.972] Verified OK [2025-09-24 14:46:46.003] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:46:47.554] Verified OK [2025-09-24 14:46:47.554] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:46:48.242] Verified OK [2025-09-24 14:46:48.242] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:46:50.912] fs.protected_hardlinks = 1 [2025-09-24 14:46:50.912] fs.protected_symlinks = 1 [2025-09-24 14:46:50.912] kernel.modules_disabled = 1 [2025-09-24 14:46:51.120] [2025-09-24 14:46:51.120] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:46:52.245] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:47:00.003] SBL1:1210.0.1.0 [2025-09-24 14:47:00.035] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:47:01.618] SBL2:1210.0.1.0 [2025-09-24 14:47:01.650] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:47:01.762] j-A [2025-09-24 14:47:09.115] The R5 Autosar Classic is running [2025-09-24 14:47:09.115] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:47:09.136] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:47:09.744] INIT: version 2.96 booting [2025-09-24 14:47:09.856] INIT: Entering runlevel: 5 [2025-09-24 14:47:10.000] mtd24 attached [2025-09-24 14:47:10.016] mtd32 attached [2025-09-24 14:47:10.016] mtd28 attached [2025-09-24 14:47:10.048] ubi0:textures is mounted. [2025-09-24 14:47:10.137] RTNETLINK answers: File exists [2025-09-24 14:47:10.137] ubi1:dml_code is mounted. [2025-09-24 14:47:10.137] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:47:10.137] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:47:10.137] ubi2:animations is mounted. [2025-09-24 14:47:10.137] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:47:10.137] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:47:10.137] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:47:10.137] data.LB_FadeInType0=100 [2025-09-24 14:47:10.137] data.CHLH_FadeInType0=0 [2025-09-24 14:47:10.137] data.WU_FadeInDelay=0 [2025-09-24 14:47:10.137] max_time_out=0 [2025-09-24 14:47:10.137] No splash screen [2025-09-24 14:47:10.137] stop dss Done [2025-09-24 14:47:10.216] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:47:10.216] /dev/mem opened. [2025-09-24 14:47:10.216] Memory mapped at address 0xffff82f4d000. [2025-09-24 14:47:10.216] Read at address 0x00600018 (0xffff82f4d018): 0x00000000 [2025-09-24 14:47:10.216] Write at address 0x00600018 (0xffff82f4d018): 0x00400040, readback 0x00400040 [2025-09-24 14:47:10.216] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:47:10.440] Loaded PowerVR consumer services. [2025-09-24 14:47:10.485] Waiting data available... [2025-09-24 14:47:10.485] 512+0 records in [2025-09-24 14:47:10.485] 512+0 records out [2025-09-24 14:47:10.518] Starting syslogd/klogd: done [2025-09-24 14:47:10.534] DML Start [2025-09-24 14:47:10.742] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:47:10.965] DML res1: 0 [2025-09-24 14:47:11.364] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:47:11.386] Read Success [2025-09-24 14:47:11.386] Verifying certificate... [2025-09-24 14:47:11.609] Verified OK [2025-09-24 14:47:11.625] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:47:13.224] Verified OK [2025-09-24 14:47:13.224] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:47:13.847] Verified OK [2025-09-24 14:47:13.847] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:47:16.582] fs.protected_hardlinks = 1 [2025-09-24 14:47:16.597] fs.protected_symlinks = 1 [2025-09-24 14:47:16.597] kernel.modules_disabled = 1 [2025-09-24 14:47:16.805] [2025-09-24 14:47:16.805] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:47:18.015] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:47:25.732] SBL1:1210.0.1.0 [2025-09-24 14:47:25.780] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:47:27.346] SBL2:1210.0.1.0 [2025-09-24 14:47:27.394] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:47:27.491] j-A [2025-09-24 14:47:34.844] The R5 Autosar Classic is running [2025-09-24 14:47:34.869] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:47:34.869] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:47:35.476] INIT: version 2.96 booting [2025-09-24 14:47:35.588] INIT: Entering runlevel: 5 [2025-09-24 14:47:35.748] mtd32 attached [2025-09-24 14:47:35.764] mtd28 attached [2025-09-24 14:47:35.764] mtd24 attached [2025-09-24 14:47:35.812] RTNETLINK answers: File exists [2025-09-24 14:47:35.875] ubi0:dml_code is mounted. [2025-09-24 14:47:35.875] ubi1:animations is mounted. [2025-09-24 14:47:35.875] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:47:35.875] ubi2:textures is mounted. [2025-09-24 14:47:35.875] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:47:35.875] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:47:35.875] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:47:35.875] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:47:35.875] data.LB_FadeInType0=100 [2025-09-24 14:47:35.875] data.CHLH_FadeInType0=0 [2025-09-24 14:47:35.875] data.WU_FadeInDelay=0 [2025-09-24 14:47:35.875] max_time_out=0 [2025-09-24 14:47:35.875] No splash screen [2025-09-24 14:47:35.875] stop dss Done [2025-09-24 14:47:35.970] /dev/mem opened. [2025-09-24 14:47:35.970] Memory mapped at address 0xffff9fa99000. [2025-09-24 14:47:35.970] Read at address 0x00600018 (0xffff9fa99018): 0x00000000 [2025-09-24 14:47:35.970] Write at address 0x00600018 (0xffff9fa99018): 0x00400040, readback 0x00400040 [2025-09-24 14:47:35.970] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:47:35.970] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:47:36.050] Loaded PowerVR consumer services. [2025-09-24 14:47:36.194] Waiting data available... [2025-09-24 14:47:36.194] 512+0 records in [2025-09-24 14:47:36.210] 512+0 records out [2025-09-24 14:47:36.226] Starting syslogd/klogd: done [2025-09-24 14:47:36.242] DML Start [2025-09-24 14:47:36.434] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:47:36.626] DML res1: 0 [2025-09-24 14:47:37.080] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:47:37.080] Read Success [2025-09-24 14:47:37.080] Verifying certificate... [2025-09-24 14:47:37.368] Verified OK [2025-09-24 14:47:37.384] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:47:39.070] Verified OK [2025-09-24 14:47:39.070] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:47:39.684] Verified OK [2025-09-24 14:47:39.684] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:47:42.290] fs.protected_hardlinks = 1 [2025-09-24 14:47:42.290] fs.protected_symlinks = 1 [2025-09-24 14:47:42.305] kernel.modules_disabled = 1 [2025-09-24 14:47:42.482] [2025-09-24 14:47:42.482] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:47:43.725] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:47:51.465] SBL1:1210.0.1.0 [2025-09-24 14:47:51.497] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:47:53.079] SBL2:1210.0.1.0 [2025-09-24 14:47:53.111] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:47:53.223] j-A [2025-09-24 14:48:00.594] The R5 Autosar Classic is running [2025-09-24 14:48:00.594] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:48:00.594] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:48:01.202] INIT: version 2.96 booting [2025-09-24 14:48:01.314] INIT: Entering runlevel: 5 [2025-09-24 14:48:01.473] mtd24 attached [2025-09-24 14:48:01.473] mtd28 attached [2025-09-24 14:48:01.489] mtd32 attached [2025-09-24 14:48:01.537] RTNETLINK answers: File exists [2025-09-24 14:48:01.601] ubi1:animations is mounted. [2025-09-24 14:48:01.601] ubi0:textures is mounted. [2025-09-24 14:48:01.601] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:48:01.601] ubi2:dml_code is mounted. [2025-09-24 14:48:01.601] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:48:01.601] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:48:01.601] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:48:01.601] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:48:01.601] data.LB_FadeInType0=100 [2025-09-24 14:48:01.601] data.CHLH_FadeInType0=0 [2025-09-24 14:48:01.601] data.WU_FadeInDelay=0 [2025-09-24 14:48:01.601] max_time_out=0 [2025-09-24 14:48:01.601] No splash screen [2025-09-24 14:48:01.601] stop dss Done [2025-09-24 14:48:01.617] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:48:01.645] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:48:01.687] /dev/mem opened. [2025-09-24 14:48:01.687] Memory mapped at address 0xffffbdf3f000. [2025-09-24 14:48:01.687] Read at address 0x00600018 (0xffffbdf3f018): 0x00000000 [2025-09-24 14:48:01.687] Write at address 0x00600018 (0xffffbdf3f018): 0x00400040, readback 0x00400040 [2025-09-24 14:48:01.879] Loaded PowerVR consumer services. [2025-09-24 14:48:01.943] Waiting data available... [2025-09-24 14:48:01.959] 512+0 records in [2025-09-24 14:48:01.959] 512+0 records out [2025-09-24 14:48:01.975] Starting syslogd/klogd: done [2025-09-24 14:48:02.007] DML Start [2025-09-24 14:48:02.167] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:48:02.375] DML res1: 0 [2025-09-24 14:48:02.886] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:48:02.902] Read Success [2025-09-24 14:48:02.902] Verifying certificate... [2025-09-24 14:48:03.190] Verified OK [2025-09-24 14:48:03.222] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:48:04.964] Verified OK [2025-09-24 14:48:04.964] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:48:05.459] Verified OK [2025-09-24 14:48:05.459] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:48:07.985] fs.protected_hardlinks = 1 [2025-09-24 14:48:08.001] fs.protected_symlinks = 1 [2025-09-24 14:48:08.001] kernel.modules_disabled = 1 [2025-09-24 14:48:08.193] [2025-09-24 14:48:08.193] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:48:09.488] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:48:17.193] SBL1:1210.0.1.0 [2025-09-24 14:48:17.241] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:48:18.808] SBL2:1210.0.1.0 [2025-09-24 14:48:18.856] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:48:18.951] j-A [2025-09-24 14:48:26.305] The R5 Autosar Classic is running [2025-09-24 14:48:26.330] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:48:26.330] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:48:26.937] INIT: version 2.96 booting [2025-09-24 14:48:27.049] INIT: Entering runlevel: 5 [2025-09-24 14:48:27.192] mtd24 attached [2025-09-24 14:48:27.208] mtd28 attached [2025-09-24 14:48:27.208] mtd32 attached [2025-09-24 14:48:27.257] ubi1:animations is mounted. [2025-09-24 14:48:27.273] RTNETLINK answers: File exists [2025-09-24 14:48:27.330] ubi2:dml_code is mounted. [2025-09-24 14:48:27.330] ubi0:textures is mounted. [2025-09-24 14:48:27.330] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:48:27.330] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:48:27.330] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:48:27.330] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:48:27.330] data.LB_FadeInType0=100 [2025-09-24 14:48:27.330] data.CHLH_FadeInType0=0 [2025-09-24 14:48:27.330] data.WU_FadeInDelay=0 [2025-09-24 14:48:27.330] max_time_out=0 [2025-09-24 14:48:27.330] No splash screen [2025-09-24 14:48:27.330] stop dss Done [2025-09-24 14:48:27.330] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:48:27.362] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:48:27.407] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:48:27.407] /dev/mem opened. [2025-09-24 14:48:27.407] Memory mapped at address 0xffff95edc000. [2025-09-24 14:48:27.407] Read at address 0x00600018 (0xffff95edc018): 0x00000000 [2025-09-24 14:48:27.407] Write at address 0x00600018 (0xffff95edc018): 0x00400040, readback 0x00400040 [2025-09-24 14:48:27.567] Loaded PowerVR consumer services. [2025-09-24 14:48:27.663] Waiting data available... [2025-09-24 14:48:27.695] 512+0 records in [2025-09-24 14:48:27.695] 512+0 records out [2025-09-24 14:48:27.742] Starting syslogd/klogd: done [2025-09-24 14:48:27.758] DML Start [2025-09-24 14:48:27.903] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:48:28.078] DML res1: 0 [2025-09-24 14:48:28.620] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:48:28.620] Read Success [2025-09-24 14:48:28.620] Verifying certificate... [2025-09-24 14:48:28.860] Verified OK [2025-09-24 14:48:28.876] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:48:30.459] Verified OK [2025-09-24 14:48:30.475] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:48:31.066] Verified OK [2025-09-24 14:48:31.082] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:48:33.609] fs.protected_hardlinks = 1 [2025-09-24 14:48:33.625] fs.protected_symlinks = 1 [2025-09-24 14:48:33.641] kernel.modules_disabled = 1 [2025-09-24 14:48:33.848] [2025-09-24 14:48:33.848] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:48:35.189] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:48:42.919] SBL1:1210.0.1.0 [2025-09-24 14:48:42.967] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:48:44.533] SBL2:1210.0.1.0 [2025-09-24 14:48:44.581] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:48:44.678] j-A [2025-09-24 14:48:52.031] The R5 Autosar Classic is running [2025-09-24 14:48:52.053] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:48:52.053] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:48:52.661] INIT: version 2.96 booting [2025-09-24 14:48:52.772] INIT: Entering runlevel: 5 [2025-09-24 14:48:52.932] mtd28 attached [2025-09-24 14:48:52.932] mtd32 attached [2025-09-24 14:48:52.948] mtd24 attached [2025-09-24 14:48:52.997] ubi0:animations is mounted. [2025-09-24 14:48:52.997] RTNETLINK answers: File exists [2025-09-24 14:48:53.057] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:48:53.057] ubi1:dml_code is mounted. [2025-09-24 14:48:53.057] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:48:53.057] ubi2:textures is mounted. [2025-09-24 14:48:53.057] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:48:53.057] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:48:53.057] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:48:53.057] data.LB_FadeInType0=100 [2025-09-24 14:48:53.057] data.CHLH_FadeInType0=0 [2025-09-24 14:48:53.057] data.WU_FadeInDelay=0 [2025-09-24 14:48:53.057] max_time_out=0 [2025-09-24 14:48:53.057] No splash screen [2025-09-24 14:48:53.057] stop dss Done [2025-09-24 14:48:53.130] /dev/mem opened. [2025-09-24 14:48:53.130] Memory mapped at address 0xffff824de000. [2025-09-24 14:48:53.130] Read at address 0x00600018 (0xffff824de018): 0x00000000 [2025-09-24 14:48:53.130] Write at address 0x00600018 (0xffff824de018): 0x00400040, readback 0x00400040 [2025-09-24 14:48:53.130] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:48:53.161] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:48:53.322] Loaded PowerVR consumer services. [2025-09-24 14:48:53.402] Waiting data available... [2025-09-24 14:48:53.417] 512+0 records in [2025-09-24 14:48:53.417] 512+0 records out [2025-09-24 14:48:53.465] Starting syslogd/klogd: done [2025-09-24 14:48:53.481] DML Start [2025-09-24 14:48:53.656] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:48:53.865] DML res1: 0 [2025-09-24 14:48:54.335] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:48:54.335] Read Success [2025-09-24 14:48:54.335] Verifying certificate... [2025-09-24 14:48:54.607] Verified OK [2025-09-24 14:48:54.623] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:48:56.360] Verified OK [2025-09-24 14:48:56.360] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:48:56.910] Verified OK [2025-09-24 14:48:56.910] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:48:59.453] fs.protected_hardlinks = 1 [2025-09-24 14:48:59.469] fs.protected_symlinks = 1 [2025-09-24 14:48:59.469] kernel.modules_disabled = 1 [2025-09-24 14:48:59.660] [2025-09-24 14:48:59.660] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:49:00.905] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:49:08.662] SBL1:1210.0.1.0 [2025-09-24 14:49:08.710] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:49:10.277] SBL2:1210.0.1.0 [2025-09-24 14:49:10.325] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:49:10.437] j-A [2025-09-24 14:49:17.775] The R5 Autosar Classic is running [2025-09-24 14:49:17.806] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:49:17.806] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:49:18.413] INIT: version 2.96 booting [2025-09-24 14:49:18.525] INIT: Entering runlevel: 5 [2025-09-24 14:49:18.669] mtd24 attached [2025-09-24 14:49:18.685] mtd28 attached [2025-09-24 14:49:18.701] mtd32 attached [2025-09-24 14:49:18.733] RTNETLINK answers: File exists [2025-09-24 14:49:18.803] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:49:18.803] ubi1:animations is mounted. [2025-09-24 14:49:18.803] ubi0:textures is mounted. [2025-09-24 14:49:18.803] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:49:18.803] ubi2:dml_code is mounted. [2025-09-24 14:49:18.803] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:49:18.803] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:49:18.803] data.LB_FadeInType0=100 [2025-09-24 14:49:18.803] data.CHLH_FadeInType0=0 [2025-09-24 14:49:18.803] data.WU_FadeInDelay=0 [2025-09-24 14:49:18.803] max_time_out=0 [2025-09-24 14:49:18.803] No splash screen [2025-09-24 14:49:18.803] stop dss Done [2025-09-24 14:49:18.803] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:49:18.887] /dev/mem opened. [2025-09-24 14:49:18.887] Memory mapped at address 0xffffab7d0000. [2025-09-24 14:49:18.887] Read at address 0x00600018 (0xffffab7d0018): 0x00000000 [2025-09-24 14:49:18.887] Write at address 0x00600018 (0xffffab7d0018): 0x00400040, readback 0x00400040 [2025-09-24 14:49:18.888] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:49:18.888] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:49:19.128] Loaded PowerVR consumer services. [2025-09-24 14:49:19.160] Waiting data available... [2025-09-24 14:49:19.176] 512+0 records in [2025-09-24 14:49:19.176] 512+0 records out [2025-09-24 14:49:19.207] Starting syslogd/klogd: done [2025-09-24 14:49:19.224] DML Start [2025-09-24 14:49:19.383] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:49:19.607] DML res1: 0 [2025-09-24 14:49:20.071] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:49:20.087] Read Success [2025-09-24 14:49:20.087] Verifying certificate... [2025-09-24 14:49:20.310] Verified OK [2025-09-24 14:49:20.326] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:49:21.938] Verified OK [2025-09-24 14:49:21.938] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:49:22.476] Verified OK [2025-09-24 14:49:22.476] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:49:25.194] fs.protected_hardlinks = 1 [2025-09-24 14:49:25.210] fs.protected_symlinks = 1 [2025-09-24 14:49:25.210] kernel.modules_disabled = 1 [2025-09-24 14:49:25.402] [2025-09-24 14:49:25.417] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:49:26.649] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:49:34.394] SBL1:1210.0.1.0 [2025-09-24 14:49:34.442] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:49:36.009] SBL2:1210.0.1.0 [2025-09-24 14:49:36.056] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:49:36.152] j-A [2025-09-24 14:49:43.507] The R5 Autosar Classic is running [2025-09-24 14:49:43.529] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:49:43.529] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:49:44.136] INIT: version 2.96 booting [2025-09-24 14:49:44.248] INIT: Entering runlevel: 5 [2025-09-24 14:49:44.392] mtd24 attached [2025-09-24 14:49:44.408] mtd28 attached [2025-09-24 14:49:44.424] mtd32 attached [2025-09-24 14:49:44.471] ubi1:animations is mounted. [2025-09-24 14:49:44.471] ubi0:textures is mounted. [2025-09-24 14:49:44.532] RTNETLINK answers: File exists [2025-09-24 14:49:44.532] ubi2:dml_code is mounted. [2025-09-24 14:49:44.532] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:49:44.532] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:49:44.532] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:49:44.532] data.LB_FadeInType0=100 [2025-09-24 14:49:44.532] data.CHLH_FadeInType0=0 [2025-09-24 14:49:44.532] data.WU_FadeInDelay=0 [2025-09-24 14:49:44.532] max_time_out=0 [2025-09-24 14:49:44.532] No splash screen [2025-09-24 14:49:44.532] stop dss Done [2025-09-24 14:49:44.532] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:49:44.532] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:49:44.602] /dev/mem opened. [2025-09-24 14:49:44.602] Memory mapped at address 0xffffaef6e000. [2025-09-24 14:49:44.602] Read at address 0x00600018 (0xffffaef6e018): 0x00000000 [2025-09-24 14:49:44.602] Write at address 0x00600018 (0xffffaef6e018): 0x00400040, readback 0x00400040 [2025-09-24 14:49:44.618] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:49:44.634] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:49:44.793] Loaded PowerVR consumer services. [2025-09-24 14:49:44.873] Waiting data available... [2025-09-24 14:49:44.889] 512+0 records in [2025-09-24 14:49:44.889] 512+0 records out [2025-09-24 14:49:44.921] Starting syslogd/klogd: done [2025-09-24 14:49:44.938] DML Start [2025-09-24 14:49:45.114] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:49:45.337] DML res1: 0 [2025-09-24 14:49:45.812] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:49:45.812] Read Success [2025-09-24 14:49:45.812] Verifying certificate... [2025-09-24 14:49:46.036] Verified OK [2025-09-24 14:49:46.052] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:49:47.886] Verified OK [2025-09-24 14:49:47.886] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:49:48.404] Verified OK [2025-09-24 14:49:48.404] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:49:50.898] fs.protected_hardlinks = 1 [2025-09-24 14:49:50.898] fs.protected_symlinks = 1 [2025-09-24 14:49:50.914] kernel.modules_disabled = 1 [2025-09-24 14:49:51.106] [2025-09-24 14:49:51.106] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:49:52.414] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:50:00.111] SBL1:1210.0.1.0 [2025-09-24 14:50:00.159] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:50:01.726] SBL2:1210.0.1.0 [2025-09-24 14:50:01.774] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:50:01.886] j-A [2025-09-24 14:50:09.224] The R5 Autosar Classic is running [2025-09-24 14:50:09.255] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:50:09.255] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:50:09.863] INIT: version 2.96 booting [2025-09-24 14:50:09.975] INIT: Entering runlevel: 5 [2025-09-24 14:50:10.118] mtd24 attached [2025-09-24 14:50:10.134] mtd32 attached [2025-09-24 14:50:10.150] mtd28 attached [2025-09-24 14:50:10.182] ubi0:textures is mounted. [2025-09-24 14:50:10.198] RTNETLINK answers: File exists [2025-09-24 14:50:10.198] ubi1:dml_code is mounted. [2025-09-24 14:50:10.251] ubi2:animations is mounted. [2025-09-24 14:50:10.251] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:50:10.251] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:50:10.251] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:50:10.251] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:50:10.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:50:10.251] data.LB_FadeInType0=100 [2025-09-24 14:50:10.251] data.CHLH_FadeInType0=0 [2025-09-24 14:50:10.251] data.WU_FadeInDelay=0 [2025-09-24 14:50:10.251] max_time_out=0 [2025-09-24 14:50:10.251] No splash screen [2025-09-24 14:50:10.251] stop dss Done [2025-09-24 14:50:10.283] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:50:10.283] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:50:10.299] /dev/mem opened. [2025-09-24 14:50:10.331] Memory mapped at address 0xffffaf021000. [2025-09-24 14:50:10.331] Read at address 0x00600018 (0xffffaf021018): 0x00000000 [2025-09-24 14:50:10.331] Write at address 0x00600018 (0xffffaf021018): 0x00400040, readback 0x00400040 [2025-09-24 14:50:10.577] Loaded PowerVR consumer services. [2025-09-24 14:50:10.577] Waiting data available... [2025-09-24 14:50:10.592] 512+0 records in [2025-09-24 14:50:10.592] 512+0 records out [2025-09-24 14:50:10.624] Starting syslogd/klogd: done [2025-09-24 14:50:10.640] DML Start [2025-09-24 14:50:10.816] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:50:11.008] DML res1: 0 [2025-09-24 14:50:11.503] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:50:11.524] Read Success [2025-09-24 14:50:11.524] Verifying certificate... [2025-09-24 14:50:11.764] Verified OK [2025-09-24 14:50:11.780] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:50:13.426] Verified OK [2025-09-24 14:50:13.426] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:50:14.013] Verified OK [2025-09-24 14:50:14.013] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:50:16.618] fs.protected_hardlinks = 1 [2025-09-24 14:50:16.634] fs.protected_symlinks = 1 [2025-09-24 14:50:16.650] kernel.modules_disabled = 1 [2025-09-24 14:50:16.841] [2025-09-24 14:50:16.841] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:50:18.136] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:50:25.842] SBL1:1210.0.1.0 [2025-09-24 14:50:25.890] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:50:27.456] SBL2:1210.0.1.0 [2025-09-24 14:50:27.504] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:50:27.600] j-A [2025-09-24 14:50:34.955] The R5 Autosar Classic is running [2025-09-24 14:50:34.980] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:50:34.980] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:50:35.587] INIT: version 2.96 booting [2025-09-24 14:50:35.700] INIT: Entering runlevel: 5 [2025-09-24 14:50:35.859] mtd28 attached [2025-09-24 14:50:35.859] mtd32 attached [2025-09-24 14:50:35.875] mtd24 attached [2025-09-24 14:50:35.923] RTNETLINK answers: File exists [2025-09-24 14:50:35.994] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:50:35.994] ubi1:dml_code is mounted. [2025-09-24 14:50:35.994] ubi0:animations is mounted. [2025-09-24 14:50:35.994] ubi2:textures is mounted. [2025-09-24 14:50:35.994] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:50:35.994] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:50:35.994] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:50:35.994] data.LB_FadeInType0=100 [2025-09-24 14:50:35.994] data.CHLH_FadeInType0=0 [2025-09-24 14:50:35.994] data.WU_FadeInDelay=0 [2025-09-24 14:50:35.994] max_time_out=0 [2025-09-24 14:50:35.994] No splash screen [2025-09-24 14:50:35.994] stop dss Done [2025-09-24 14:50:35.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:50:36.059] /dev/mem opened. [2025-09-24 14:50:36.059] Memory mapped at address 0xffff85fdd000. [2025-09-24 14:50:36.059] Read at address 0x00600018 (0xffff85fdd018): 0x00000000 [2025-09-24 14:50:36.059] Write at address 0x00600018 (0xffff85fdd018): 0x00400040, readback 0x00400040 [2025-09-24 14:50:36.076] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:50:36.092] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:50:36.172] Loaded PowerVR consumer services. [2025-09-24 14:50:36.300] Waiting data available... [2025-09-24 14:50:36.316] 512+0 records in [2025-09-24 14:50:36.316] 512+0 records out [2025-09-24 14:50:36.364] Starting syslogd/klogd: done [2025-09-24 14:50:36.380] DML Start [2025-09-24 14:50:36.539] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:50:36.780] DML res1: 0 [2025-09-24 14:50:37.227] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:50:37.243] Read Success [2025-09-24 14:50:37.243] Verifying certificate... [2025-09-24 14:50:37.467] Verified OK [2025-09-24 14:50:37.483] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:50:39.204] Verified OK [2025-09-24 14:50:39.204] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:50:39.795] Verified OK [2025-09-24 14:50:39.810] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:50:42.305] fs.protected_hardlinks = 1 [2025-09-24 14:50:42.305] fs.protected_symlinks = 1 [2025-09-24 14:50:42.320] kernel.modules_disabled = 1 [2025-09-24 14:50:42.496] [2025-09-24 14:50:42.496] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:50:43.807] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:50:51.565] SBL1:1210.0.1.0 [2025-09-24 14:50:51.613] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:50:53.180] SBL2:1210.0.1.0 [2025-09-24 14:50:53.228] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:50:53.324] j-A [2025-09-24 14:51:00.678] The R5 Autosar Classic is running [2025-09-24 14:51:00.702] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:51:00.702] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:51:01.311] INIT: version 2.96 booting [2025-09-24 14:51:01.422] INIT: Entering runlevel: 5 [2025-09-24 14:51:01.566] mtd24 attached [2025-09-24 14:51:01.582] mtd28 attached [2025-09-24 14:51:01.644] ubi0:textures is mounted. [2025-09-24 14:51:01.644] ubi1:animations is mounted. [2025-09-24 14:51:01.644] mtd32 attached [2025-09-24 14:51:01.644] RTNETLINK answers: File exists [2025-09-24 14:51:01.660] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:51:01.660] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:51:01.689] ubi2:dml_code is mounted. [2025-09-24 14:51:01.689] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:51:01.689] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:51:01.689] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:51:01.713] data.LB_FadeInType0=100 [2025-09-24 14:51:01.713] data.CHLH_FadeInType0=0 [2025-09-24 14:51:01.713] data.WU_FadeInDelay=0 [2025-09-24 14:51:01.713] max_time_out=0 [2025-09-24 14:51:01.713] No splash screen [2025-09-24 14:51:01.713] stop dss Done [2025-09-24 14:51:01.754] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:51:01.754] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:51:01.791] /dev/mem opened. [2025-09-24 14:51:01.791] Memory mapped at address 0xffff8d17b000. [2025-09-24 14:51:01.791] Read at address 0x00600018 (0xffff8d17b018): 0x00000000 [2025-09-24 14:51:01.791] Write at address 0x00600018 (0xffff8d17b018): 0x00400040, readback 0x00400040 [2025-09-24 14:51:01.999] Loaded PowerVR consumer services. [2025-09-24 14:51:02.031] Waiting data available... [2025-09-24 14:51:02.062] 512+0 records in [2025-09-24 14:51:02.062] 512+0 records out [2025-09-24 14:51:02.094] Starting syslogd/klogd: done [2025-09-24 14:51:02.110] DML Start [2025-09-24 14:51:02.255] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:51:02.526] DML res1: 0 [2025-09-24 14:51:02.974] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:51:02.995] Read Success [2025-09-24 14:51:02.995] Verifying certificate... [2025-09-24 14:51:03.250] Verified OK [2025-09-24 14:51:03.283] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:51:05.101] Verified OK [2025-09-24 14:51:05.101] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:51:05.572] Verified OK [2025-09-24 14:51:05.572] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:51:07.953] fs.protected_hardlinks = 1 [2025-09-24 14:51:07.953] fs.protected_symlinks = 1 [2025-09-24 14:51:07.969] kernel.modules_disabled = 1 [2025-09-24 14:51:08.193] [2025-09-24 14:51:08.193] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:51:09.604] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:51:17.294] SBL1:1210.0.1.0 [2025-09-24 14:51:17.326] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:51:18.908] SBL2:1210.0.1.0 [2025-09-24 14:51:18.940] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:51:19.052] j-A [2025-09-24 14:51:26.407] The R5 Autosar Classic is running [2025-09-24 14:51:26.407] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:51:26.428] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:51:27.035] INIT: version 2.96 booting [2025-09-24 14:51:27.147] INIT: Entering runlevel: 5 [2025-09-24 14:51:27.291] mtd32 attached [2025-09-24 14:51:27.307] mtd24 attached [2025-09-24 14:51:27.323] mtd28 attached [2025-09-24 14:51:27.355] ubi0:dml_code is mounted. [2025-09-24 14:51:27.371] RTNETLINK answers: File exists [2025-09-24 14:51:27.427] ubi1:textures is mounted. [2025-09-24 14:51:27.427] ubi2:animations is mounted. [2025-09-24 14:51:27.427] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:51:27.427] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:51:27.427] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:51:27.427] data.LB_FadeInType0=100 [2025-09-24 14:51:27.427] data.CHLH_FadeInType0=0 [2025-09-24 14:51:27.427] data.WU_FadeInDelay=0 [2025-09-24 14:51:27.427] max_time_out=0 [2025-09-24 14:51:27.427] No splash screen [2025-09-24 14:51:27.427] stop dss Done [2025-09-24 14:51:27.427] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:51:27.443] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:51:27.485] /dev/mem opened. [2025-09-24 14:51:27.485] Memory mapped at address 0xffffa43a8000. [2025-09-24 14:51:27.485] Read at address 0x00600018 (0xffffa43a8018): 0x00000000 [2025-09-24 14:51:27.485] Write at address 0x00600018 (0xffffa43a8018): 0x00400040, readback 0x00400040 [2025-09-24 14:51:27.540] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:51:27.540] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:51:27.621] Loaded PowerVR consumer services. [2025-09-24 14:51:27.778] Waiting data available... [2025-09-24 14:51:27.778] 512+0 records in [2025-09-24 14:51:27.778] 512+0 records out [2025-09-24 14:51:27.811] Starting syslogd/klogd: done [2025-09-24 14:51:27.826] DML Start [2025-09-24 14:51:28.001] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:51:28.225] DML res1: 0 [2025-09-24 14:51:28.703] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:51:28.703] Read Success [2025-09-24 14:51:28.703] Verifying certificate... [2025-09-24 14:51:28.942] Verified OK [2025-09-24 14:51:28.958] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:51:30.652] Verified OK [2025-09-24 14:51:30.652] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:51:31.275] Verified OK [2025-09-24 14:51:31.275] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:51:33.881] fs.protected_hardlinks = 1 [2025-09-24 14:51:33.912] fs.protected_symlinks = 1 [2025-09-24 14:51:33.912] kernel.modules_disabled = 1 [2025-09-24 14:51:34.103] [2025-09-24 14:51:34.103] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:51:35.261] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:51:43.035] SBL1:1210.0.1.0 [2025-09-24 14:51:43.067] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:51:44.650] SBL2:1210.0.1.0 [2025-09-24 14:51:44.681] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:51:44.793] j-A [2025-09-24 14:51:52.148] The R5 Autosar Classic is running [2025-09-24 14:51:52.148] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:51:52.169] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:51:52.776] INIT: version 2.96 booting [2025-09-24 14:51:52.888] INIT: Entering runlevel: 5 [2025-09-24 14:51:53.049] mtd28 attached [2025-09-24 14:51:53.049] mtd24 attached [2025-09-24 14:51:53.064] mtd32 attached [2025-09-24 14:51:53.169] ubi0:animations is mounted. [2025-09-24 14:51:53.169] RTNETLINK answers: File exists [2025-09-24 14:51:53.169] ubi1:textures is mounted. [2025-09-24 14:51:53.169] ubi2:dml_code is mounted. [2025-09-24 14:51:53.169] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:51:53.169] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:51:53.169] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:51:53.169] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:51:53.169] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:51:53.169] data.LB_FadeInType0=100 [2025-09-24 14:51:53.169] data.CHLH_FadeInType0=0 [2025-09-24 14:51:53.169] data.WU_FadeInDelay=0 [2025-09-24 14:51:53.169] max_time_out=0 [2025-09-24 14:51:53.169] No splash screen [2025-09-24 14:51:53.169] stop dss Done [2025-09-24 14:51:53.217] /dev/mem opened. [2025-09-24 14:51:53.217] Memory mapped at address 0xffff87a3c000. [2025-09-24 14:51:53.217] Read at address 0x00600018 (0xffff87a3c018): 0x00000000 [2025-09-24 14:51:53.250] Write at address 0x00600018 (0xffff87a3c018): 0x00400040, readback 0x00400040 [2025-09-24 14:51:53.250] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:51:53.250] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:51:53.361] Loaded PowerVR consumer services. [2025-09-24 14:51:53.489] Waiting data available... [2025-09-24 14:51:53.506] 512+0 records in [2025-09-24 14:51:53.506] 512+0 records out [2025-09-24 14:51:53.553] Starting syslogd/klogd: done [2025-09-24 14:51:53.569] DML Start [2025-09-24 14:51:53.761] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:51:53.985] DML res1: 0 [2025-09-24 14:51:54.333] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:51:54.333] Read Success [2025-09-24 14:51:54.333] Verifying certificate... [2025-09-24 14:51:54.606] Verified OK [2025-09-24 14:51:54.621] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:51:56.338] Verified OK [2025-09-24 14:51:56.338] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:51:56.960] Verified OK [2025-09-24 14:51:56.960] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:51:59.534] fs.protected_hardlinks = 1 [2025-09-24 14:51:59.534] fs.protected_symlinks = 1 [2025-09-24 14:51:59.550] kernel.modules_disabled = 1 [2025-09-24 14:51:59.742] [2025-09-24 14:51:59.742] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:52:01.052] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:52:08.752] SBL1:1210.0.1.0 [2025-09-24 14:52:08.800] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:52:10.367] SBL2:1210.0.1.0 [2025-09-24 14:52:10.415] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:52:10.511] j-A [2025-09-24 14:52:17.865] The R5 Autosar Classic is running [2025-09-24 14:52:17.865] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:52:17.886] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:52:18.494] INIT: version 2.96 booting [2025-09-24 14:52:18.606] INIT: Entering runlevel: 5 [2025-09-24 14:52:18.749] mtd28 attached [2025-09-24 14:52:18.765] mtd24 attached [2025-09-24 14:52:18.781] mtd32 attached [2025-09-24 14:52:18.829] ubi0:animations is mounted. [2025-09-24 14:52:18.829] RTNETLINK answers: File exists [2025-09-24 14:52:18.859] ubi1:textures is mounted. [2025-09-24 14:52:18.859] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:52:18.859] ubi2:dml_code is mounted. [2025-09-24 14:52:18.859] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:52:18.859] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:52:18.859] data.LB_FadeInType0=100 [2025-09-24 14:52:18.885] data.CHLH_FadeInType0=0 [2025-09-24 14:52:18.885] data.WU_FadeInDelay=0 [2025-09-24 14:52:18.885] max_time_out=0 [2025-09-24 14:52:18.885] No splash screen [2025-09-24 14:52:18.885] stop dss Done [2025-09-24 14:52:18.885] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:52:18.885] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:52:18.933] /dev/mem opened. [2025-09-24 14:52:18.965] Memory mapped at address 0xffff97bae000. [2025-09-24 14:52:18.965] Read at address 0x00600018 (0xffff97bae018): 0x00000000 [2025-09-24 14:52:18.965] Write at address 0x00600018 (0xffff97bae018): 0x00400040, readback 0x00400040 [2025-09-24 14:52:18.965] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:52:18.996] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:52:19.156] Loaded PowerVR consumer services. [2025-09-24 14:52:19.266] Waiting data available... [2025-09-24 14:52:19.266] 512+0 records in [2025-09-24 14:52:19.266] 512+0 records out [2025-09-24 14:52:19.298] Starting syslogd/klogd: done [2025-09-24 14:52:19.314] DML Start [2025-09-24 14:52:19.505] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:52:19.745] DML res1: 0 [2025-09-24 14:52:20.153] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:52:20.153] Read Success [2025-09-24 14:52:20.153] Verifying certificate... [2025-09-24 14:52:20.424] Verified OK [2025-09-24 14:52:20.456] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:52:22.176] Verified OK [2025-09-24 14:52:22.177] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:52:22.688] Verified OK [2025-09-24 14:52:22.688] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:52:25.198] fs.protected_hardlinks = 1 [2025-09-24 14:52:25.198] fs.protected_symlinks = 1 [2025-09-24 14:52:25.214] kernel.modules_disabled = 1 [2025-09-24 14:52:25.407] [2025-09-24 14:52:25.407] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:52:26.813] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:52:34.483] SBL1:1210.0.1.0 [2025-09-24 14:52:34.531] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:52:36.098] SBL2:1210.0.1.0 [2025-09-24 14:52:36.146] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:52:36.258] j-A [2025-09-24 14:52:43.595] The R5 Autosar Classic is running [2025-09-24 14:52:43.626] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:52:43.626] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:52:44.235] INIT: version 2.96 booting [2025-09-24 14:52:44.346] INIT: Entering runlevel: 5 [2025-09-24 14:52:44.491] mtd24 attached [2025-09-24 14:52:44.507] mtd28 attached [2025-09-24 14:52:44.522] mtd32 attached [2025-09-24 14:52:44.554] ubi0:textures is mounted. [2025-09-24 14:52:44.570] ubi1:animations is mounted. [2025-09-24 14:52:44.632] RTNETLINK answers: File exists [2025-09-24 14:52:44.632] ubi2:dml_code is mounted. [2025-09-24 14:52:44.632] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:52:44.632] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:52:44.632] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:52:44.632] data.LB_FadeInType0=100 [2025-09-24 14:52:44.632] data.CHLH_FadeInType0=0 [2025-09-24 14:52:44.632] data.WU_FadeInDelay=0 [2025-09-24 14:52:44.632] max_time_out=0 [2025-09-24 14:52:44.632] No splash screen [2025-09-24 14:52:44.632] stop dss Done [2025-09-24 14:52:44.632] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:52:44.632] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:52:44.714] /dev/mem opened. [2025-09-24 14:52:44.714] Memory mapped at address 0xffff99c9f000. [2025-09-24 14:52:44.714] Read at address 0x00600018 (0xffff99c9f018): 0x00000000 [2025-09-24 14:52:44.714] Write at address 0x00600018 (0xffff99c9f018): 0x00400040, readback 0x00400040 [2025-09-24 14:52:44.714] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:52:44.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:52:44.827] Loaded PowerVR consumer services. [2025-09-24 14:52:44.970] Waiting data available... [2025-09-24 14:52:44.986] 512+0 records in [2025-09-24 14:52:44.986] 512+0 records out [2025-09-24 14:52:45.034] Starting syslogd/klogd: done [2025-09-24 14:52:45.050] DML Start [2025-09-24 14:52:45.242] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:52:45.482] DML res1: 0 [2025-09-24 14:52:45.912] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:52:45.912] Read Success [2025-09-24 14:52:45.912] Verifying certificate... [2025-09-24 14:52:46.168] Verified OK [2025-09-24 14:52:46.168] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:52:47.783] Verified OK [2025-09-24 14:52:47.804] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:52:48.401] Verified OK [2025-09-24 14:52:48.401] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:52:50.959] fs.protected_hardlinks = 1 [2025-09-24 14:52:50.959] fs.protected_symlinks = 1 [2025-09-24 14:52:50.975] kernel.modules_disabled = 1 [2025-09-24 14:52:51.168] [2025-09-24 14:52:51.168] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:52:52.572] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:53:00.232] SBL1:1210.0.1.0 [2025-09-24 14:53:00.264] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:53:01.847] SBL2:1210.0.1.0 [2025-09-24 14:53:01.879] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:53:01.990] j-A [2025-09-24 14:53:09.361] The R5 Autosar Classic is running [2025-09-24 14:53:09.361] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:53:09.361] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:53:09.968] INIT: version 2.96 booting [2025-09-24 14:53:10.079] INIT: Entering runlevel: 5 [2025-09-24 14:53:10.239] mtd32 attached [2025-09-24 14:53:10.239] mtd24 attached [2025-09-24 14:53:10.256] mtd28 attached [2025-09-24 14:53:10.304] RTNETLINK answers: File exists [2025-09-24 14:53:10.352] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:53:10.352] ubi2:animations is mounted. [2025-09-24 14:53:10.352] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:53:10.352] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:53:10.352] ubi1:textures is mounted. [2025-09-24 14:53:10.352] ubi0:dml_code is mounted. [2025-09-24 14:53:10.352] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:53:10.352] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:53:10.373] data.LB_FadeInType0=100 [2025-09-24 14:53:10.373] data.CHLH_FadeInType0=0 [2025-09-24 14:53:10.373] data.WU_FadeInDelay=0 [2025-09-24 14:53:10.373] max_time_out=0 [2025-09-24 14:53:10.373] No splash screen [2025-09-24 14:53:10.373] stop dss Done [2025-09-24 14:53:10.421] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:53:10.458] /dev/mem opened. [2025-09-24 14:53:10.458] Memory mapped at address 0xffff999f9000. [2025-09-24 14:53:10.458] Read at address 0x00600018 (0xffff999f9018): 0x00000000 [2025-09-24 14:53:10.458] Write at address 0x00600018 (0xffff999f9018): 0x00400040, readback 0x00400040 [2025-09-24 14:53:10.458] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:53:10.665] Loaded PowerVR consumer services. [2025-09-24 14:53:10.713] Waiting data available... [2025-09-24 14:53:10.713] 512+0 records in [2025-09-24 14:53:10.729] 512+0 records out [2025-09-24 14:53:10.745] Starting syslogd/klogd: done [2025-09-24 14:53:10.761] DML Start [2025-09-24 14:53:10.953] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:53:11.177] DML res1: 0 [2025-09-24 14:53:11.576] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:53:11.597] Read Success [2025-09-24 14:53:11.597] Verifying certificate... [2025-09-24 14:53:11.853] Verified OK [2025-09-24 14:53:11.869] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:53:13.465] Verified OK [2025-09-24 14:53:13.465] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:53:14.182] Verified OK [2025-09-24 14:53:14.182] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:53:16.820] fs.protected_hardlinks = 1 [2025-09-24 14:53:16.836] fs.protected_symlinks = 1 [2025-09-24 14:53:16.836] kernel.modules_disabled = 1 [2025-09-24 14:53:17.027] [2025-09-24 14:53:17.027] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:53:18.210] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:53:25.968] SBL1:1210.0.1.0 [2025-09-24 14:53:26.000] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:53:27.583] SBL2:1210.0.1.0 [2025-09-24 14:53:27.615] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:53:27.727] j-A [2025-09-24 14:53:35.097] The R5 Autosar Classic is running [2025-09-24 14:53:35.097] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:53:35.097] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:53:35.704] INIT: version 2.96 booting [2025-09-24 14:53:35.816] INIT: Entering runlevel: 5 [2025-09-24 14:53:35.976] mtd24 attached [2025-09-24 14:53:35.992] mtd32 attached [2025-09-24 14:53:35.992] mtd28 attached [2025-09-24 14:53:36.040] RTNETLINK answers: File exists [2025-09-24 14:53:36.040] ubi0:textures is mounted. [2025-09-24 14:53:36.106] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:53:36.106] ubi2:animations is mounted. [2025-09-24 14:53:36.106] ubi1:dml_code is mounted. [2025-09-24 14:53:36.106] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:53:36.106] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:53:36.106] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:53:36.106] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:53:36.106] data.LB_FadeInType0=100 [2025-09-24 14:53:36.106] data.CHLH_FadeInType0=0 [2025-09-24 14:53:36.106] data.WU_FadeInDelay=0 [2025-09-24 14:53:36.106] max_time_out=0 [2025-09-24 14:53:36.106] No splash screen [2025-09-24 14:53:36.106] stop dss Done [2025-09-24 14:53:36.137] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:53:36.190] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:53:36.190] /dev/mem opened. [2025-09-24 14:53:36.190] Memory mapped at address 0xffffb7394000. [2025-09-24 14:53:36.190] Read at address 0x00600018 (0xffffb7394018): 0x00000000 [2025-09-24 14:53:36.190] Write at address 0x00600018 (0xffffb7394018): 0x00400040, readback 0x00400040 [2025-09-24 14:53:36.286] Loaded PowerVR consumer services. [2025-09-24 14:53:36.430] Waiting data available... [2025-09-24 14:53:36.446] 512+0 records in [2025-09-24 14:53:36.446] 512+0 records out [2025-09-24 14:53:36.462] Starting syslogd/klogd: done [2025-09-24 14:53:36.477] DML Start [2025-09-24 14:53:36.670] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:53:36.893] DML res1: 0 [2025-09-24 14:53:37.309] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:53:37.309] Read Success [2025-09-24 14:53:37.325] Verifying certificate... [2025-09-24 14:53:37.565] Verified OK [2025-09-24 14:53:37.597] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:53:39.356] Verified OK [2025-09-24 14:53:39.356] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:53:39.963] Verified OK [2025-09-24 14:53:39.963] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:53:42.522] fs.protected_hardlinks = 1 [2025-09-24 14:53:42.522] fs.protected_symlinks = 1 [2025-09-24 14:53:42.538] kernel.modules_disabled = 1 [2025-09-24 14:53:42.713] [2025-09-24 14:53:42.713] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:53:43.969] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:53:46.261] [2025-09-24 14:53:51.664] SBL1:1210.0.1.0 [2025-09-24 14:53:51.712] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:53:53.279] SBL2:1210.0.1.0 [2025-09-24 14:53:53.327] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:53:53.422] j-A [2025-09-24 14:54:00.775] The R5 Autosar Classic is running [2025-09-24 14:54:00.800] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:54:00.800] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:54:01.408] INIT: version 2.96 booting [2025-09-24 14:54:01.520] INIT: Entering runlevel: 5 [2025-09-24 14:54:01.679] mtd28 attached [2025-09-24 14:54:01.679] mtd32 attached [2025-09-24 14:54:01.695] mtd24 attached [2025-09-24 14:54:01.743] ubi0:animations is mounted. [2025-09-24 14:54:01.743] RTNETLINK answers: File exists [2025-09-24 14:54:01.787] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:54:01.787] ubi2:textures is mounted. [2025-09-24 14:54:01.787] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:54:01.787] ubi1:dml_code is mounted. [2025-09-24 14:54:01.787] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:54:01.787] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:54:01.787] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:54:01.808] data.LB_FadeInType0=100 [2025-09-24 14:54:01.808] data.CHLH_FadeInType0=0 [2025-09-24 14:54:01.808] data.WU_FadeInDelay=0 [2025-09-24 14:54:01.808] max_time_out=0 [2025-09-24 14:54:01.808] No splash screen [2025-09-24 14:54:01.808] stop dss Done [2025-09-24 14:54:01.857] /dev/mem opened. [2025-09-24 14:54:01.896] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:54:01.896] Memory mapped at address 0xffffb3f76000. [2025-09-24 14:54:01.896] Read at address 0x00600018 (0xffffb3f76018): 0x00000000 [2025-09-24 14:54:01.896] Write at address 0x00600018 (0xffffb3f76018): 0x00400040, readback 0x00400040 [2025-09-24 14:54:01.896] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:54:01.960] Loaded PowerVR consumer services. [2025-09-24 14:54:02.120] Waiting data available... [2025-09-24 14:54:02.136] 512+0 records in [2025-09-24 14:54:02.136] 512+0 records out [2025-09-24 14:54:02.184] Starting syslogd/klogd: done [2025-09-24 14:54:02.200] DML Start [2025-09-24 14:54:02.360] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:54:02.599] DML res1: 0 [2025-09-24 14:54:03.047] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:54:03.047] Read Success [2025-09-24 14:54:03.063] Verifying certificate... [2025-09-24 14:54:03.287] Verified OK [2025-09-24 14:54:03.303] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:54:04.880] Verified OK [2025-09-24 14:54:04.880] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:54:05.547] Verified OK [2025-09-24 14:54:05.547] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:54:08.326] fs.protected_hardlinks = 1 [2025-09-24 14:54:08.326] fs.protected_symlinks = 1 [2025-09-24 14:54:08.326] kernel.modules_disabled = 1 [2025-09-24 14:54:08.503] [2025-09-24 14:54:08.503] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:54:09.670] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:54:17.396] SBL1:1210.0.1.0 [2025-09-24 14:54:17.428] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:54:19.011] SBL2:1210.0.1.0 [2025-09-24 14:54:19.042] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:54:19.155] j-A [2025-09-24 14:54:26.528] The R5 Autosar Classic is running [2025-09-24 14:54:26.528] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:54:26.528] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:54:27.135] INIT: version 2.96 booting [2025-09-24 14:54:27.247] INIT: Entering runlevel: 5 [2025-09-24 14:54:27.391] mtd24 attached [2025-09-24 14:54:27.407] mtd28 attached [2025-09-24 14:54:27.423] mtd32 attached [2025-09-24 14:54:27.471] ubi0:textures is mounted. [2025-09-24 14:54:27.471] RTNETLINK answers: File exists [2025-09-24 14:54:27.528] ubi1:animations is mounted. [2025-09-24 14:54:27.528] ubi2:dml_code is mounted. [2025-09-24 14:54:27.528] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:54:27.528] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:54:27.528] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:54:27.528] data.LB_FadeInType0=100 [2025-09-24 14:54:27.528] data.CHLH_FadeInType0=0 [2025-09-24 14:54:27.528] data.WU_FadeInDelay=0 [2025-09-24 14:54:27.528] max_time_out=0 [2025-09-24 14:54:27.528] No splash screen [2025-09-24 14:54:27.528] stop dss Done [2025-09-24 14:54:27.528] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:54:27.528] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:54:27.559] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:54:27.597] /dev/mem opened. [2025-09-24 14:54:27.597] Memory mapped at address 0xffff7fc77000. [2025-09-24 14:54:27.597] Read at address 0x00600018 (0xffff7fc77018): 0x00000000 [2025-09-24 14:54:27.597] Write at address 0x00600018 (0xffff7fc77018): 0x00400040, readback 0x00400040 [2025-09-24 14:54:27.597] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:54:27.836] Loaded PowerVR consumer services. [2025-09-24 14:54:27.852] Waiting data available... [2025-09-24 14:54:27.885] 512+0 records in [2025-09-24 14:54:27.885] 512+0 records out [2025-09-24 14:54:27.932] Starting syslogd/klogd: done [2025-09-24 14:54:27.948] DML Start [2025-09-24 14:54:28.140] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:54:28.380] DML res1: 0 [2025-09-24 14:54:28.793] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:54:28.793] Read Success [2025-09-24 14:54:28.793] Verifying certificate... [2025-09-24 14:54:29.081] Verified OK [2025-09-24 14:54:29.097] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:54:30.807] Verified OK [2025-09-24 14:54:30.823] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:54:31.398] Verified OK [2025-09-24 14:54:31.423] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:54:33.934] fs.protected_hardlinks = 1 [2025-09-24 14:54:33.934] fs.protected_symlinks = 1 [2025-09-24 14:54:33.950] kernel.modules_disabled = 1 [2025-09-24 14:54:34.141] [2025-09-24 14:54:34.141] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:54:35.445] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:54:43.120] SBL1:1210.0.1.0 [2025-09-24 14:54:43.168] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:54:44.735] SBL2:1210.0.1.0 [2025-09-24 14:54:44.783] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:54:44.879] j-A [2025-09-24 14:54:52.232] The R5 Autosar Classic is running [2025-09-24 14:54:52.257] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:54:52.257] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:54:52.864] INIT: version 2.96 booting [2025-09-24 14:54:52.977] INIT: Entering runlevel: 5 [2025-09-24 14:54:53.136] mtd28 attached [2025-09-24 14:54:53.136] mtd24 attached [2025-09-24 14:54:53.152] mtd32 attached [2025-09-24 14:54:53.215] ubi0:animations is mounted. [2025-09-24 14:54:53.215] RTNETLINK answers: File exists [2025-09-24 14:54:53.215] ubi1:textures is mounted. [2025-09-24 14:54:53.215] ubi2:dml_code is mounted. [2025-09-24 14:54:53.215] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:54:53.265] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:54:53.265] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:54:53.265] data.LB_FadeInType0=100 [2025-09-24 14:54:53.265] data.CHLH_FadeInType0=0 [2025-09-24 14:54:53.265] data.WU_FadeInDelay=0 [2025-09-24 14:54:53.265] max_time_out=0 [2025-09-24 14:54:53.265] No splash screen [2025-09-24 14:54:53.265] stop dss Done [2025-09-24 14:54:53.265] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:54:53.265] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:54:53.339] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:54:53.339] /dev/mem opened. [2025-09-24 14:54:53.339] Memory mapped at address 0xffffa357e000. [2025-09-24 14:54:53.339] Read at address 0x00600018 (0xffffa357e018): 0x00000000 [2025-09-24 14:54:53.339] Write at address 0x00600018 (0xffffa357e018): 0x00400040, readback 0x00400040 [2025-09-24 14:54:53.339] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:54:53.451] Loaded PowerVR consumer services. [2025-09-24 14:54:53.608] Waiting data available... [2025-09-24 14:54:53.608] 512+0 records in [2025-09-24 14:54:53.608] 512+0 records out [2025-09-24 14:54:53.640] Starting syslogd/klogd: done [2025-09-24 14:54:53.656] DML Start [2025-09-24 14:54:53.815] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:54:54.039] DML res1: 0 [2025-09-24 14:54:54.533] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:54:54.533] Read Success [2025-09-24 14:54:54.533] Verifying certificate... [2025-09-24 14:54:54.756] Verified OK [2025-09-24 14:54:54.772] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:54:56.387] Verified OK [2025-09-24 14:54:56.387] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:54:57.086] Verified OK [2025-09-24 14:54:57.086] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:54:59.708] fs.protected_hardlinks = 1 [2025-09-24 14:54:59.724] fs.protected_symlinks = 1 [2025-09-24 14:54:59.724] kernel.modules_disabled = 1 [2025-09-24 14:54:59.932] [2025-09-24 14:54:59.932] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:55:01.142] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:55:08.876] SBL1:1210.0.1.0 [2025-09-24 14:55:08.908] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:55:10.491] SBL2:1210.0.1.0 [2025-09-24 14:55:10.523] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:55:10.635] j-A [2025-09-24 14:55:18.005] The R5 Autosar Classic is running [2025-09-24 14:55:18.005] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:55:18.005] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:55:18.612] INIT: version 2.96 booting [2025-09-24 14:55:18.724] INIT: Entering runlevel: 5 [2025-09-24 14:55:18.868] mtd24 attached [2025-09-24 14:55:18.884] mtd28 attached [2025-09-24 14:55:18.900] mtd32 attached [2025-09-24 14:55:18.948] RTNETLINK answers: File exists [2025-09-24 14:55:18.948] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:55:18.989] ubi0:textures is mounted. [2025-09-24 14:55:18.989] ubi1:animations is mounted. [2025-09-24 14:55:18.989] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:55:18.989] ubi2:dml_code is mounted. [2025-09-24 14:55:18.989] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:55:18.989] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:55:18.989] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:55:18.989] data.LB_FadeInType0=100 [2025-09-24 14:55:18.989] data.CHLH_FadeInType0=0 [2025-09-24 14:55:19.010] data.WU_FadeInDelay=0 [2025-09-24 14:55:19.010] max_time_out=0 [2025-09-24 14:55:19.010] No splash screen [2025-09-24 14:55:19.010] stop dss Done [2025-09-24 14:55:19.042] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:55:19.084] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:55:19.084] /dev/mem opened. [2025-09-24 14:55:19.084] Memory mapped at address 0xffff83434000. [2025-09-24 14:55:19.084] Read at address 0x00600018 (0xffff83434018): 0x00000000 [2025-09-24 14:55:19.084] Write at address 0x00600018 (0xffff83434018): 0x00400040, readback 0x00400040 [2025-09-24 14:55:19.277] Loaded PowerVR consumer services. [2025-09-24 14:55:19.341] Waiting data available... [2025-09-24 14:55:19.357] 512+0 records in [2025-09-24 14:55:19.357] 512+0 records out [2025-09-24 14:55:19.388] Starting syslogd/klogd: done [2025-09-24 14:55:19.404] DML Start [2025-09-24 14:55:19.596] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:55:19.820] DML res1: 0 [2025-09-24 14:55:20.258] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:55:20.258] Read Success [2025-09-24 14:55:20.258] Verifying certificate... [2025-09-24 14:55:20.498] Verified OK [2025-09-24 14:55:20.514] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:55:22.065] Verified OK [2025-09-24 14:55:22.065] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:55:22.694] Verified OK [2025-09-24 14:55:22.694] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:55:25.476] fs.protected_hardlinks = 1 [2025-09-24 14:55:25.492] fs.protected_symlinks = 1 [2025-09-24 14:55:25.508] kernel.modules_disabled = 1 [2025-09-24 14:55:25.700] [2025-09-24 14:55:25.700] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:55:26.867] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:55:34.667] SBL1:1210.0.1.0 [2025-09-24 14:55:34.699] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:55:36.281] SBL2:1210.0.1.0 [2025-09-24 14:55:36.313] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:55:36.425] j-A [2025-09-24 14:55:43.795] The R5 Autosar Classic is running [2025-09-24 14:55:43.795] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:55:43.795] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:55:44.403] INIT: version 2.96 booting [2025-09-24 14:55:44.514] INIT: Entering runlevel: 5 [2025-09-24 14:55:44.659] mtd24 attached [2025-09-24 14:55:44.675] mtd28 attached [2025-09-24 14:55:44.691] mtd32 attached [2025-09-24 14:55:44.739] ubi1:animations is mounted. [2025-09-24 14:55:44.739] RTNETLINK answers: File exists [2025-09-24 14:55:44.780] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:55:44.780] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:55:44.780] ubi2:dml_code is mounted. [2025-09-24 14:55:44.780] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:55:44.781] ubi0:textures is mounted. [2025-09-24 14:55:44.781] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:55:44.781] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:55:44.804] data.LB_FadeInType0=100 [2025-09-24 14:55:44.804] data.CHLH_FadeInType0=0 [2025-09-24 14:55:44.804] data.WU_FadeInDelay=0 [2025-09-24 14:55:44.804] max_time_out=0 [2025-09-24 14:55:44.804] No splash screen [2025-09-24 14:55:44.804] stop dss Done [2025-09-24 14:55:44.820] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:55:44.850] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:55:44.888] /dev/mem opened. [2025-09-24 14:55:44.888] Memory mapped at address 0xffff967f6000. [2025-09-24 14:55:44.888] Read at address 0x00600018 (0xffff967f6018): 0x00000000 [2025-09-24 14:55:44.888] Write at address 0x00600018 (0xffff967f6018): 0x00400040, readback 0x00400040 [2025-09-24 14:55:45.112] Loaded PowerVR consumer services. [2025-09-24 14:55:45.128] Waiting data available... [2025-09-24 14:55:45.144] 512+0 records in [2025-09-24 14:55:45.144] 512+0 records out [2025-09-24 14:55:45.176] Starting syslogd/klogd: done [2025-09-24 14:55:45.192] DML Start [2025-09-24 14:55:45.368] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:55:45.607] DML res1: 0 [2025-09-24 14:55:46.014] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:55:46.014] Read Success [2025-09-24 14:55:46.014] Verifying certificate... [2025-09-24 14:55:46.286] Verified OK [2025-09-24 14:55:46.302] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:55:47.997] Verified OK [2025-09-24 14:55:47.997] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:55:48.597] Verified OK [2025-09-24 14:55:48.597] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:55:51.170] fs.protected_hardlinks = 1 [2025-09-24 14:55:51.186] fs.protected_symlinks = 1 [2025-09-24 14:55:51.186] kernel.modules_disabled = 1 [2025-09-24 14:55:51.394] [2025-09-24 14:55:51.394] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:55:52.665] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:56:00.370] SBL1:1210.0.1.0 [2025-09-24 14:56:00.418] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:56:01.985] SBL2:1210.0.1.0 [2025-09-24 14:56:02.032] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:56:02.145] j-A [2025-09-24 14:56:09.483] The R5 Autosar Classic is running [2025-09-24 14:56:09.514] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:56:09.514] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:56:10.121] INIT: version 2.96 booting [2025-09-24 14:56:10.217] INIT: Entering runlevel: 5 [2025-09-24 14:56:10.377] mtd24 attached [2025-09-24 14:56:10.377] mtd28 attached [2025-09-24 14:56:10.409] mtd32 attached [2025-09-24 14:56:10.441] ubi1:animations is mounted. [2025-09-24 14:56:10.507] RTNETLINK answers: File exists [2025-09-24 14:56:10.507] ubi0:textures is mounted. [2025-09-24 14:56:10.507] ubi2:dml_code is mounted. [2025-09-24 14:56:10.507] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:56:10.507] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:56:10.507] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:56:10.507] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:56:10.507] data.LB_FadeInType0=100 [2025-09-24 14:56:10.507] data.CHLH_FadeInType0=0 [2025-09-24 14:56:10.507] data.WU_FadeInDelay=0 [2025-09-24 14:56:10.507] max_time_out=0 [2025-09-24 14:56:10.507] No splash screen [2025-09-24 14:56:10.507] stop dss Done [2025-09-24 14:56:10.507] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:56:10.571] /dev/mem opened. [2025-09-24 14:56:10.571] Memory mapped at address 0xffff92cb6000. [2025-09-24 14:56:10.571] Read at address 0x00600018 (0xffff92cb6018): 0x00000000 [2025-09-24 14:56:10.571] Write at address 0x00600018 (0xffff92cb6018): 0x00400040, readback 0x00400040 [2025-09-24 14:56:10.587] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:56:10.587] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:56:10.795] Loaded PowerVR consumer services. [2025-09-24 14:56:10.827] Waiting data available... [2025-09-24 14:56:10.843] 512+0 records in [2025-09-24 14:56:10.843] 512+0 records out [2025-09-24 14:56:10.876] Starting syslogd/klogd: done [2025-09-24 14:56:10.892] DML Start [2025-09-24 14:56:11.019] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:56:11.275] DML res1: 0 [2025-09-24 14:56:11.739] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:56:11.755] Read Success [2025-09-24 14:56:11.755] Verifying certificate... [2025-09-24 14:56:11.978] Verified OK [2025-09-24 14:56:12.010] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:56:13.575] Verified OK [2025-09-24 14:56:13.575] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:56:14.273] Verified OK [2025-09-24 14:56:14.273] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:56:16.988] fs.protected_hardlinks = 1 [2025-09-24 14:56:16.988] fs.protected_symlinks = 1 [2025-09-24 14:56:16.988] kernel.modules_disabled = 1 [2025-09-24 14:56:17.163] [2025-09-24 14:56:17.163] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:56:18.381] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:56:26.125] SBL1:1210.0.1.0 [2025-09-24 14:56:26.157] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:56:27.740] SBL2:1210.0.1.0 [2025-09-24 14:56:27.772] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:56:27.884] j-A [2025-09-24 14:56:35.256] The R5 Autosar Classic is running [2025-09-24 14:56:35.256] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:56:35.256] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:56:35.863] INIT: version 2.96 booting [2025-09-24 14:56:35.959] INIT: Entering runlevel: 5 [2025-09-24 14:56:36.118] mtd24 attached [2025-09-24 14:56:36.118] mtd28 attached [2025-09-24 14:56:36.135] mtd32 attached [2025-09-24 14:56:36.199] RTNETLINK answers: File exists [2025-09-24 14:56:36.199] ubi0:textures is mounted. [2025-09-24 14:56:36.232] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:56:36.232] ubi1:animations is mounted. [2025-09-24 14:56:36.232] ubi2:dml_code is mounted. [2025-09-24 14:56:36.232] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:56:36.232] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:56:36.232] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:56:36.232] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:56:36.254] data.LB_FadeInType0=100 [2025-09-24 14:56:36.254] data.CHLH_FadeInType0=0 [2025-09-24 14:56:36.254] data.WU_FadeInDelay=0 [2025-09-24 14:56:36.254] max_time_out=0 [2025-09-24 14:56:36.254] No splash screen [2025-09-24 14:56:36.254] stop dss Done [2025-09-24 14:56:36.286] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:56:36.302] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:56:36.334] /dev/mem opened. [2025-09-24 14:56:36.334] Memory mapped at address 0xffff9d195000. [2025-09-24 14:56:36.334] Read at address 0x00600018 (0xffff9d195018): 0x00000000 [2025-09-24 14:56:36.334] Write at address 0x00600018 (0xffff9d195018): 0x00400040, readback 0x00400040 [2025-09-24 14:56:36.429] Loaded PowerVR consumer services. [2025-09-24 14:56:36.590] Waiting data available... [2025-09-24 14:56:36.606] 512+0 records in [2025-09-24 14:56:36.606] 512+0 records out [2025-09-24 14:56:36.621] Starting syslogd/klogd: done [2025-09-24 14:56:36.638] DML Start [2025-09-24 14:56:36.829] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:56:37.052] DML res1: 0 [2025-09-24 14:56:37.483] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:56:37.483] Read Success [2025-09-24 14:56:37.483] Verifying certificate... [2025-09-24 14:56:37.754] Verified OK [2025-09-24 14:56:37.787] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:56:39.471] Verified OK [2025-09-24 14:56:39.471] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:56:40.046] Verified OK [2025-09-24 14:56:40.046] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:56:42.492] fs.protected_hardlinks = 1 [2025-09-24 14:56:42.521] fs.protected_symlinks = 1 [2025-09-24 14:56:42.521] kernel.modules_disabled = 1 [2025-09-24 14:56:42.697] [2025-09-24 14:56:42.697] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:56:44.130] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:56:51.902] SBL1:1210.0.1.0 [2025-09-24 14:56:51.950] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:56:53.517] SBL2:1210.0.1.0 [2025-09-24 14:56:53.565] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:56:53.661] j-A [2025-09-24 14:57:01.015] The R5 Autosar Classic is running [2025-09-24 14:57:01.039] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:57:01.039] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:57:01.648] INIT: version 2.96 booting [2025-09-24 14:57:01.759] INIT: Entering runlevel: 5 [2025-09-24 14:57:01.920] mtd32 attached [2025-09-24 14:57:01.920] mtd24 attached [2025-09-24 14:57:01.935] mtd28 attached [2025-09-24 14:57:01.983] ubi0:dml_code is mounted. [2025-09-24 14:57:01.983] RTNETLINK answers: File exists [2025-09-24 14:57:02.021] ubi1:textures is mounted. [2025-09-24 14:57:02.021] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:57:02.021] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:57:02.021] ubi2:animations is mounted. [2025-09-24 14:57:02.021] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:57:02.021] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:57:02.021] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:57:02.047] data.LB_FadeInType0=100 [2025-09-24 14:57:02.047] data.CHLH_FadeInType0=0 [2025-09-24 14:57:02.047] data.WU_FadeInDelay=0 [2025-09-24 14:57:02.047] max_time_out=0 [2025-09-24 14:57:02.047] No splash screen [2025-09-24 14:57:02.047] stop dss Done [2025-09-24 14:57:02.079] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:57:02.079] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:57:02.115] /dev/mem opened. [2025-09-24 14:57:02.115] Memory mapped at address 0xffff95d68000. [2025-09-24 14:57:02.115] Read at address 0x00600018 (0xffff95d68018): 0x00000000 [2025-09-24 14:57:02.115] Write at address 0x00600018 (0xffff95d68018): 0x00400040, readback 0x00400040 [2025-09-24 14:57:02.227] Loaded PowerVR consumer services. [2025-09-24 14:57:02.371] Waiting data available... [2025-09-24 14:57:02.371] 512+0 records in [2025-09-24 14:57:02.387] 512+0 records out [2025-09-24 14:57:02.419] Starting syslogd/klogd: done [2025-09-24 14:57:02.435] DML Start [2025-09-24 14:57:02.610] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:57:02.850] DML res1: 0 [2025-09-24 14:57:03.306] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:57:03.306] Read Success [2025-09-24 14:57:03.306] Verifying certificate... [2025-09-24 14:57:03.530] Verified OK [2025-09-24 14:57:03.546] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:57:05.185] Verified OK [2025-09-24 14:57:05.185] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:57:05.777] Verified OK [2025-09-24 14:57:05.793] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:57:08.414] fs.protected_hardlinks = 1 [2025-09-24 14:57:08.430] fs.protected_symlinks = 1 [2025-09-24 14:57:08.430] kernel.modules_disabled = 1 [2025-09-24 14:57:08.622] [2025-09-24 14:57:08.622] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:57:09.924] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:57:17.628] SBL1:1210.0.1.0 [2025-09-24 14:57:17.676] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:57:19.243] SBL2:1210.0.1.0 [2025-09-24 14:57:19.291] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:57:19.403] j-A [2025-09-24 14:57:26.742] The R5 Autosar Classic is running [2025-09-24 14:57:26.767] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:57:26.767] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:57:27.374] INIT: version 2.96 booting [2025-09-24 14:57:27.486] INIT: Entering runlevel: 5 [2025-09-24 14:57:27.646] mtd28 attached [2025-09-24 14:57:27.662] mtd24 attached [2025-09-24 14:57:27.662] mtd32 attached [2025-09-24 14:57:27.710] RTNETLINK answers: File exists [2025-09-24 14:57:27.760] ubi0:animations is mounted. [2025-09-24 14:57:27.760] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:57:27.760] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:57:27.760] ubi1:textures is mounted. [2025-09-24 14:57:27.760] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:57:27.760] ubi2:dml_code is mounted. [2025-09-24 14:57:27.760] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:57:27.760] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:57:27.760] data.LB_FadeInType0=100 [2025-09-24 14:57:27.781] data.CHLH_FadeInType0=0 [2025-09-24 14:57:27.781] data.WU_FadeInDelay=0 [2025-09-24 14:57:27.781] max_time_out=0 [2025-09-24 14:57:27.781] No splash screen [2025-09-24 14:57:27.781] stop dss Done [2025-09-24 14:57:27.797] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:57:27.813] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:57:27.829] /dev/mem opened. [2025-09-24 14:57:27.829] Memory mapped at address 0xffffb29d7000. [2025-09-24 14:57:27.855] Read at address 0x00600018 (0xffffb29d7018): 0x00000000 [2025-09-24 14:57:27.855] Write at address 0x00600018 (0xffffb29d7018): 0x00400040, readback 0x00400040 [2025-09-24 14:57:27.998] Loaded PowerVR consumer services. [2025-09-24 14:57:28.111] Waiting data available... [2025-09-24 14:57:28.127] 512+0 records in [2025-09-24 14:57:28.143] 512+0 records out [2025-09-24 14:57:28.191] Starting syslogd/klogd: done [2025-09-24 14:57:28.207] DML Start [2025-09-24 14:57:28.382] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:57:28.590] DML res1: 0 [2025-09-24 14:57:29.054] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:57:29.074] Read Success [2025-09-24 14:57:29.074] Verifying certificate... [2025-09-24 14:57:29.314] Verified OK [2025-09-24 14:57:29.330] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:57:30.977] Verified OK [2025-09-24 14:57:30.977] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:57:31.609] Verified OK [2025-09-24 14:57:31.609] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:57:34.119] fs.protected_hardlinks = 1 [2025-09-24 14:57:34.119] fs.protected_symlinks = 1 [2025-09-24 14:57:34.135] kernel.modules_disabled = 1 [2025-09-24 14:57:34.326] [2025-09-24 14:57:34.326] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:57:35.639] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:57:43.357] SBL1:1210.0.1.0 [2025-09-24 14:57:43.389] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:57:44.971] SBL2:1210.0.1.0 [2025-09-24 14:57:45.003] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:57:45.116] j-A [2025-09-24 14:57:52.487] The R5 Autosar Classic is running [2025-09-24 14:57:52.487] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:57:52.487] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:57:53.095] INIT: version 2.96 booting [2025-09-24 14:57:53.207] INIT: Entering runlevel: 5 [2025-09-24 14:57:53.350] mtd24 attached [2025-09-24 14:57:53.366] mtd28 attached [2025-09-24 14:57:53.382] mtd32 attached [2025-09-24 14:57:53.415] ubi0:textures is mounted. [2025-09-24 14:57:53.431] RTNETLINK answers: File exists [2025-09-24 14:57:53.472] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:57:53.472] ubi1:animations is mounted. [2025-09-24 14:57:53.472] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:57:53.472] ubi2:dml_code is mounted. [2025-09-24 14:57:53.472] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:57:53.472] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:57:53.472] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:57:53.501] data.LB_FadeInType0=100 [2025-09-24 14:57:53.501] data.CHLH_FadeInType0=0 [2025-09-24 14:57:53.501] data.WU_FadeInDelay=0 [2025-09-24 14:57:53.501] max_time_out=0 [2025-09-24 14:57:53.501] No splash screen [2025-09-24 14:57:53.501] stop dss Done [2025-09-24 14:57:53.533] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:57:53.549] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:57:53.589] /dev/mem opened. [2025-09-24 14:57:53.589] Memory mapped at address 0xffff96365000. [2025-09-24 14:57:53.589] Read at address 0x00600018 (0xffff96365018): 0x00000000 [2025-09-24 14:57:53.589] Write at address 0x00600018 (0xffff96365018): 0x00400040, readback 0x00400040 [2025-09-24 14:57:53.797] Loaded PowerVR consumer services. [2025-09-24 14:57:53.828] Waiting data available... [2025-09-24 14:57:53.844] 512+0 records in [2025-09-24 14:57:53.844] 512+0 records out [2025-09-24 14:57:53.876] Starting syslogd/klogd: done [2025-09-24 14:57:53.892] DML Start [2025-09-24 14:57:54.084] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:57:54.308] DML res1: 0 [2025-09-24 14:57:54.788] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:57:54.803] Read Success [2025-09-24 14:57:54.803] Verifying certificate... [2025-09-24 14:57:55.076] Verified OK [2025-09-24 14:57:55.092] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:57:56.569] Verified OK [2025-09-24 14:57:56.569] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:57:57.235] Verified OK [2025-09-24 14:57:57.235] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:57:59.825] fs.protected_hardlinks = 1 [2025-09-24 14:57:59.825] fs.protected_symlinks = 1 [2025-09-24 14:57:59.841] kernel.modules_disabled = 1 [2025-09-24 14:58:00.017] [2025-09-24 14:58:00.017] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:58:01.372] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:58:03.647] @SBL1:1210.0.1.0 [2025-09-24 14:58:09.097] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:58:10.680] SBL2:1210.0.1.0 [2025-09-24 14:58:10.711] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:58:10.823] j-A [2025-09-24 14:58:18.197] The R5 Autosar Classic is running [2025-09-24 14:58:18.197] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:58:18.197] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:58:18.805] INIT: version 2.96 booting [2025-09-24 14:58:18.916] INIT: Entering runlevel: 5 [2025-09-24 14:58:19.060] mtd28 attached [2025-09-24 14:58:19.076] mtd32 attached [2025-09-24 14:58:19.092] mtd24 attached [2025-09-24 14:58:19.124] RTNETLINK answers: File exists [2025-09-24 14:58:19.173] ubi0:animations is mounted. [2025-09-24 14:58:19.173] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:58:19.173] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:58:19.173] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:58:19.173] ubi2:textures is mounted. [2025-09-24 14:58:19.173] ubi1:dml_code is mounted. [2025-09-24 14:58:19.173] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:58:19.173] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:58:19.203] data.LB_FadeInType0=100 [2025-09-24 14:58:19.203] data.CHLH_FadeInType0=0 [2025-09-24 14:58:19.203] data.WU_FadeInDelay=0 [2025-09-24 14:58:19.203] max_time_out=0 [2025-09-24 14:58:19.203] No splash screen [2025-09-24 14:58:19.203] stop dss Done [2025-09-24 14:58:19.219] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:58:19.219] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:58:19.270] /dev/mem opened. [2025-09-24 14:58:19.270] Memory mapped at address 0xffffa8982000. [2025-09-24 14:58:19.270] Read at address 0x00600018 (0xffffa8982018): 0x00000000 [2025-09-24 14:58:19.270] Write at address 0x00600018 (0xffffa8982018): 0x00400040, readback 0x00400040 [2025-09-24 14:58:19.509] Loaded PowerVR consumer services. [2025-09-24 14:58:19.525] Waiting data available... [2025-09-24 14:58:19.541] 512+0 records in [2025-09-24 14:58:19.541] 512+0 records out [2025-09-24 14:58:19.605] Starting syslogd/klogd: done [2025-09-24 14:58:19.605] DML Start [2025-09-24 14:58:19.781] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:58:20.004] DML res1: 0 [2025-09-24 14:58:20.467] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:58:20.467] Read Success [2025-09-24 14:58:20.467] Verifying certificate... [2025-09-24 14:58:20.706] Verified OK [2025-09-24 14:58:20.722] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:58:22.443] Verified OK [2025-09-24 14:58:22.443] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:58:22.986] Verified OK [2025-09-24 14:58:23.002] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:58:25.576] fs.protected_hardlinks = 1 [2025-09-24 14:58:25.576] fs.protected_symlinks = 1 [2025-09-24 14:58:25.592] kernel.modules_disabled = 1 [2025-09-24 14:58:25.784] [2025-09-24 14:58:25.784] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:58:27.026] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:58:34.806] SBL1:1210.0.1.0 [2025-09-24 14:58:34.838] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:58:36.420] SBL2:1210.0.1.0 [2025-09-24 14:58:36.452] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:58:36.564] j-A [2025-09-24 14:58:43.937] The R5 Autosar Classic is running [2025-09-24 14:58:43.937] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:58:43.937] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:58:44.544] INIT: version 2.96 booting [2025-09-24 14:58:44.656] INIT: Entering runlevel: 5 [2025-09-24 14:58:44.799] mtd24 attached [2025-09-24 14:58:44.815] mtd28 attached [2025-09-24 14:58:44.832] mtd32 attached [2025-09-24 14:58:44.864] ubi0:textures is mounted. [2025-09-24 14:58:44.880] ubi1:animations is mounted. [2025-09-24 14:58:44.880] RTNETLINK answers: File exists [2025-09-24 14:58:44.917] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:58:44.917] ubi2:dml_code is mounted. [2025-09-24 14:58:44.917] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:58:44.917] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:58:44.917] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:58:44.950] data.LB_FadeInType0=100 [2025-09-24 14:58:44.950] data.CHLH_FadeInType0=0 [2025-09-24 14:58:44.950] data.WU_FadeInDelay=0 [2025-09-24 14:58:44.950] max_time_out=0 [2025-09-24 14:58:44.950] No splash screen [2025-09-24 14:58:44.950] stop dss Done [2025-09-24 14:58:44.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:58:45.016] /dev/mem opened. [2025-09-24 14:58:45.016] Memory mapped at address 0xffffa9fbb000. [2025-09-24 14:58:45.016] Read at address 0x00600018 (0xffffa9fbb018): 0x00000000 [2025-09-24 14:58:45.016] Write at address 0x00600018 (0xffffa9fbb018): 0x00400040, readback 0x00400040 [2025-09-24 14:58:45.016] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:58:45.032] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:58:45.144] Loaded PowerVR consumer services. [2025-09-24 14:58:45.271] Waiting data available... [2025-09-24 14:58:45.288] 512+0 records in [2025-09-24 14:58:45.288] 512+0 records out [2025-09-24 14:58:45.303] Starting syslogd/klogd: done [2025-09-24 14:58:45.335] DML Start [2025-09-24 14:58:45.511] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:58:45.767] DML res1: 0 [2025-09-24 14:58:46.173] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:58:46.173] Read Success [2025-09-24 14:58:46.173] Verifying certificate... [2025-09-24 14:58:46.429] Verified OK [2025-09-24 14:58:46.445] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:58:48.188] Verified OK [2025-09-24 14:58:48.188] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:58:48.758] Verified OK [2025-09-24 14:58:48.758] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:58:51.316] fs.protected_hardlinks = 1 [2025-09-24 14:58:51.316] fs.protected_symlinks = 1 [2025-09-24 14:58:51.332] kernel.modules_disabled = 1 [2025-09-24 14:58:51.524] [2025-09-24 14:58:51.524] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:58:52.826] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:59:00.536] SBL1:1210.0.1.0 [2025-09-24 14:59:00.584] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:59:02.151] SBL2:1210.0.1.0 [2025-09-24 14:59:02.199] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:59:02.295] j-A [2025-09-24 14:59:09.649] The R5 Autosar Classic is running [2025-09-24 14:59:09.671] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:59:09.671] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:59:10.278] INIT: version 2.96 booting [2025-09-24 14:59:10.390] INIT: Entering runlevel: 5 [2025-09-24 14:59:10.535] mtd24 attached [2025-09-24 14:59:10.550] mtd28 attached [2025-09-24 14:59:10.566] mtd32 attached [2025-09-24 14:59:10.582] ubi0:textures is mounted. [2025-09-24 14:59:10.614] RTNETLINK answers: File exists [2025-09-24 14:59:10.614] ubi1:animations is mounted. [2025-09-24 14:59:10.674] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:59:10.674] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:59:10.674] ubi2:dml_code is mounted. [2025-09-24 14:59:10.674] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:59:10.674] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:59:10.674] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:59:10.674] data.LB_FadeInType0=100 [2025-09-24 14:59:10.674] data.CHLH_FadeInType0=0 [2025-09-24 14:59:10.674] data.WU_FadeInDelay=0 [2025-09-24 14:59:10.674] max_time_out=0 [2025-09-24 14:59:10.674] No splash screen [2025-09-24 14:59:10.674] stop dss Done [2025-09-24 14:59:10.753] /dev/mem opened. [2025-09-24 14:59:10.753] Memory mapped at address 0xffff9bcb8000. [2025-09-24 14:59:10.753] Read at address 0x00600018 (0xffff9bcb8018): 0x00000000 [2025-09-24 14:59:10.753] Write at address 0x00600018 (0xffff9bcb8018): 0x00400040, readback 0x00400040 [2025-09-24 14:59:10.753] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:59:10.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:59:10.849] Loaded PowerVR consumer services. [2025-09-24 14:59:10.993] Waiting data available... [2025-09-24 14:59:11.009] 512+0 records in [2025-09-24 14:59:11.009] 512+0 records out [2025-09-24 14:59:11.056] Starting syslogd/klogd: done [2025-09-24 14:59:11.073] DML Start [2025-09-24 14:59:11.248] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:59:11.489] DML res1: 0 [2025-09-24 14:59:11.927] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:59:11.927] Read Success [2025-09-24 14:59:11.927] Verifying certificate... [2025-09-24 14:59:12.216] Verified OK [2025-09-24 14:59:12.232] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:59:13.901] Verified OK [2025-09-24 14:59:13.901] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:59:14.525] Verified OK [2025-09-24 14:59:14.525] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:59:17.195] fs.protected_hardlinks = 1 [2025-09-24 14:59:17.195] fs.protected_symlinks = 1 [2025-09-24 14:59:17.210] kernel.modules_disabled = 1 [2025-09-24 14:59:17.403] [2025-09-24 14:59:17.403] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:59:18.554] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:59:26.251] SBL1:1210.0.1.0 [2025-09-24 14:59:26.283] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:59:27.866] SBL2:1210.0.1.0 [2025-09-24 14:59:27.898] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:59:28.010] j-A [2025-09-24 14:59:35.363] The R5 Autosar Classic is running [2025-09-24 14:59:35.363] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 14:59:35.385] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 14:59:35.991] INIT: version 2.96 booting [2025-09-24 14:59:36.104] INIT: Entering runlevel: 5 [2025-09-24 14:59:36.263] mtd28 attached [2025-09-24 14:59:36.263] mtd24 attached [2025-09-24 14:59:36.279] mtd32 attached [2025-09-24 14:59:36.386] ubi0:animations is mounted. [2025-09-24 14:59:36.386] RTNETLINK answers: File exists [2025-09-24 14:59:36.386] ubi1:textures is mounted. [2025-09-24 14:59:36.386] ubi2:dml_code is mounted. [2025-09-24 14:59:36.386] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 14:59:36.386] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 14:59:36.386] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 14:59:36.386] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 14:59:36.386] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 14:59:36.386] data.LB_FadeInType0=100 [2025-09-24 14:59:36.386] data.CHLH_FadeInType0=0 [2025-09-24 14:59:36.386] data.WU_FadeInDelay=0 [2025-09-24 14:59:36.386] max_time_out=0 [2025-09-24 14:59:36.386] No splash screen [2025-09-24 14:59:36.386] stop dss Done [2025-09-24 14:59:36.427] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 14:59:36.427] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 14:59:36.442] /dev/mem opened. [2025-09-24 14:59:36.474] Memory mapped at address 0xffff90b2c000. [2025-09-24 14:59:36.474] Read at address 0x00600018 (0xffff90b2c018): 0x00000000 [2025-09-24 14:59:36.474] Write at address 0x00600018 (0xffff90b2c018): 0x00400040, readback 0x00400040 [2025-09-24 14:59:36.586] Loaded PowerVR consumer services. [2025-09-24 14:59:36.737] Waiting data available... [2025-09-24 14:59:36.737] 512+0 records in [2025-09-24 14:59:36.737] 512+0 records out [2025-09-24 14:59:36.785] Starting syslogd/klogd: done [2025-09-24 14:59:36.801] DML Start [2025-09-24 14:59:36.977] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 14:59:37.185] DML res1: 0 [2025-09-24 14:59:37.616] Read DML Algo certificate (mtd31) and save to file [2025-09-24 14:59:37.637] Read Success [2025-09-24 14:59:37.637] Verifying certificate... [2025-09-24 14:59:37.877] Verified OK [2025-09-24 14:59:37.893] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 14:59:39.600] Verified OK [2025-09-24 14:59:39.600] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 14:59:40.220] Verified OK [2025-09-24 14:59:40.220] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 14:59:42.859] fs.protected_hardlinks = 1 [2025-09-24 14:59:42.875] fs.protected_symlinks = 1 [2025-09-24 14:59:42.875] kernel.modules_disabled = 1 [2025-09-24 14:59:43.066] [2025-09-24 14:59:43.067] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 14:59:44.265] RTNETLINK answers: Cannot assign requested address [2025-09-24 14:59:51.976] SBL1:1210.0.1.0 [2025-09-24 14:59:52.024] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 14:59:53.590] SBL2:1210.0.1.0 [2025-09-24 14:59:53.638] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 14:59:53.734] j-A [2025-09-24 15:00:01.087] The R5 Autosar Classic is running [2025-09-24 15:00:01.112] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:00:01.112] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:00:01.720] INIT: version 2.96 booting [2025-09-24 15:00:01.832] INIT: Entering runlevel: 5 [2025-09-24 15:00:01.976] mtd24 attached [2025-09-24 15:00:01.991] mtd28 attached [2025-09-24 15:00:02.007] mtd32 attached [2025-09-24 15:00:02.055] ubi0:textures is mounted. [2025-09-24 15:00:02.055] RTNETLINK answers: File exists [2025-09-24 15:00:02.090] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:00:02.090] ubi1:animations is mounted. [2025-09-24 15:00:02.090] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:00:02.090] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:00:02.090] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:00:02.090] ubi2:dml_code is mounted. [2025-09-24 15:00:02.090] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:00:02.120] data.LB_FadeInType0=100 [2025-09-24 15:00:02.120] data.CHLH_FadeInType0=0 [2025-09-24 15:00:02.120] data.WU_FadeInDelay=0 [2025-09-24 15:00:02.120] max_time_out=0 [2025-09-24 15:00:02.120] No splash screen [2025-09-24 15:00:02.120] stop dss Done [2025-09-24 15:00:02.148] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:00:02.148] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:00:02.189] /dev/mem opened. [2025-09-24 15:00:02.189] Memory mapped at address 0xffffb9e63000. [2025-09-24 15:00:02.189] Read at address 0x00600018 (0xffffb9e63018): 0x00000000 [2025-09-24 15:00:02.189] Write at address 0x00600018 (0xffffb9e63018): 0x00400040, readback 0x00400040 [2025-09-24 15:00:02.269] Loaded PowerVR consumer services. [2025-09-24 15:00:02.445] Waiting data available... [2025-09-24 15:00:02.461] 512+0 records in [2025-09-24 15:00:02.461] 512+0 records out [2025-09-24 15:00:02.509] Starting syslogd/klogd: done [2025-09-24 15:00:02.525] DML Start [2025-09-24 15:00:02.685] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:00:02.909] DML res1: 0 [2025-09-24 15:00:03.405] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:00:03.425] Read Success [2025-09-24 15:00:03.425] Verifying certificate... [2025-09-24 15:00:03.681] Verified OK [2025-09-24 15:00:03.696] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:00:05.434] Verified OK [2025-09-24 15:00:05.434] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:00:06.042] Verified OK [2025-09-24 15:00:06.042] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:00:08.617] fs.protected_hardlinks = 1 [2025-09-24 15:00:08.617] fs.protected_symlinks = 1 [2025-09-24 15:00:08.632] kernel.modules_disabled = 1 [2025-09-24 15:00:08.824] [2025-09-24 15:00:08.824] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:00:09.975] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:00:17.716] SBL1:1210.0.1.0 [2025-09-24 15:00:17.748] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:00:19.331] SBL2:1210.0.1.0 [2025-09-24 15:00:19.363] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:00:19.475] j-A [2025-09-24 15:00:26.847] The R5 Autosar Classic is running [2025-09-24 15:00:26.847] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:00:26.847] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:00:27.455] INIT: version 2.96 booting [2025-09-24 15:00:27.566] INIT: Entering runlevel: 5 [2025-09-24 15:00:27.727] mtd32 attached [2025-09-24 15:00:27.743] mtd28 attached [2025-09-24 15:00:27.743] mtd24 attached [2025-09-24 15:00:27.775] ubi0:dml_code is mounted. [2025-09-24 15:00:27.791] ubi1:animations is mounted. [2025-09-24 15:00:27.791] RTNETLINK answers: File exists [2025-09-24 15:00:27.849] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:00:27.849] ubi2:textures is mounted. [2025-09-24 15:00:27.849] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:00:27.849] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:00:27.849] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:00:27.849] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:00:27.849] data.LB_FadeInType0=100 [2025-09-24 15:00:27.849] data.CHLH_FadeInType0=0 [2025-09-24 15:00:27.849] data.WU_FadeInDelay=0 [2025-09-24 15:00:27.849] max_time_out=0 [2025-09-24 15:00:27.849] No splash screen [2025-09-24 15:00:27.849] stop dss Done [2025-09-24 15:00:27.927] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:00:27.927] /dev/mem opened. [2025-09-24 15:00:27.927] Memory mapped at address 0xffff8b4d1000. [2025-09-24 15:00:27.927] Read at address 0x00600018 (0xffff8b4d1018): 0x00000000 [2025-09-24 15:00:27.927] Write at address 0x00600018 (0xffff8b4d1018): 0x00400040, readback 0x00400040 [2025-09-24 15:00:27.927] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:00:28.039] Loaded PowerVR consumer services. [2025-09-24 15:00:28.167] Waiting data available... [2025-09-24 15:00:28.183] 512+0 records in [2025-09-24 15:00:28.183] 512+0 records out [2025-09-24 15:00:28.215] Starting syslogd/klogd: done [2025-09-24 15:00:28.231] DML Start [2025-09-24 15:00:28.423] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:00:28.647] DML res1: 0 [2025-09-24 15:00:29.110] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:00:29.132] Read Success [2025-09-24 15:00:29.132] Verifying certificate... [2025-09-24 15:00:29.372] Verified OK [2025-09-24 15:00:29.389] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:00:31.048] Verified OK [2025-09-24 15:00:31.048] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:00:31.639] Verified OK [2025-09-24 15:00:31.639] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:00:34.373] fs.protected_hardlinks = 1 [2025-09-24 15:00:34.373] fs.protected_symlinks = 1 [2025-09-24 15:00:34.389] kernel.modules_disabled = 1 [2025-09-24 15:00:34.580] [2025-09-24 15:00:34.580] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:00:35.729] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:00:43.431] SBL1:1210.0.1.0 [2025-09-24 15:00:43.463] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:00:45.045] SBL2:1210.0.1.0 [2025-09-24 15:00:45.077] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:00:45.189] j-A [2025-09-24 15:00:52.561] The R5 Autosar Classic is running [2025-09-24 15:00:52.561] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:00:52.561] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:00:53.168] INIT: version 2.96 booting [2025-09-24 15:00:53.280] INIT: Entering runlevel: 5 [2025-09-24 15:00:53.441] mtd24 attached [2025-09-24 15:00:53.441] mtd32 attached [2025-09-24 15:00:53.457] mtd28 attached [2025-09-24 15:00:53.505] RTNETLINK answers: File exists [2025-09-24 15:00:53.505] ubi0:textures is mounted. [2025-09-24 15:00:53.567] ubi1:dml_code is mounted. [2025-09-24 15:00:53.567] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:00:53.567] ubi2:animations is mounted. [2025-09-24 15:00:53.567] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:00:53.567] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:00:53.567] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:00:53.567] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:00:53.567] data.LB_FadeInType0=100 [2025-09-24 15:00:53.567] data.CHLH_FadeInType0=0 [2025-09-24 15:00:53.567] data.WU_FadeInDelay=0 [2025-09-24 15:00:53.567] max_time_out=0 [2025-09-24 15:00:53.567] No splash screen [2025-09-24 15:00:53.567] stop dss Done [2025-09-24 15:00:53.599] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:00:53.636] /dev/mem opened. [2025-09-24 15:00:53.636] Memory mapped at address 0xffff9d46b000. [2025-09-24 15:00:53.636] Read at address 0x00600018 (0xffff9d46b018): 0x00000000 [2025-09-24 15:00:53.636] Write at address 0x00600018 (0xffff9d46b018): 0x00400040, readback 0x00400040 [2025-09-24 15:00:53.636] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:00:53.780] Loaded PowerVR consumer services. [2025-09-24 15:00:53.892] Waiting data available... [2025-09-24 15:00:53.907] 512+0 records in [2025-09-24 15:00:53.924] 512+0 records out [2025-09-24 15:00:53.939] Starting syslogd/klogd: done [2025-09-24 15:00:53.955] DML Start [2025-09-24 15:00:54.148] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:00:54.372] DML res1: 0 [2025-09-24 15:00:54.833] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:00:54.833] Read Success [2025-09-24 15:00:54.833] Verifying certificate... [2025-09-24 15:00:55.072] Verified OK [2025-09-24 15:00:55.088] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:00:56.826] Verified OK [2025-09-24 15:00:56.826] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:00:57.364] Verified OK [2025-09-24 15:00:57.364] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:00:59.843] fs.protected_hardlinks = 1 [2025-09-24 15:00:59.843] fs.protected_symlinks = 1 [2025-09-24 15:00:59.859] kernel.modules_disabled = 1 [2025-09-24 15:01:00.051] [2025-09-24 15:01:00.051] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:01:01.449] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:01:09.140] SBL1:1210.0.1.0 [2025-09-24 15:01:09.172] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:01:10.756] SBL2:1210.0.1.0 [2025-09-24 15:01:10.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:01:10.899] j-A [2025-09-24 15:01:18.272] The R5 Autosar Classic is running [2025-09-24 15:01:18.272] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:01:18.272] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:01:18.880] INIT: version 2.96 booting [2025-09-24 15:01:18.991] INIT: Entering runlevel: 5 [2025-09-24 15:01:19.151] mtd28 attached [2025-09-24 15:01:19.151] mtd24 attached [2025-09-24 15:01:19.167] mtd32 attached [2025-09-24 15:01:19.215] ubi0:animations is mounted. [2025-09-24 15:01:19.215] RTNETLINK answers: File exists [2025-09-24 15:01:19.232] ubi2:dml_code is mounted. [2025-09-24 15:01:19.232] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:01:19.288] ubi1:textures is mounted. [2025-09-24 15:01:19.288] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:01:19.288] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:01:19.288] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:01:19.288] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:01:19.288] data.LB_FadeInType0=100 [2025-09-24 15:01:19.288] data.CHLH_FadeInType0=0 [2025-09-24 15:01:19.288] data.WU_FadeInDelay=0 [2025-09-24 15:01:19.288] max_time_out=0 [2025-09-24 15:01:19.288] No splash screen [2025-09-24 15:01:19.288] stop dss Done [2025-09-24 15:01:19.375] /dev/mem opened. [2025-09-24 15:01:19.375] Memory mapped at address 0xffff91b1f000. [2025-09-24 15:01:19.375] Read at address 0x00600018 (0xffff91b1f018): 0x00000000 [2025-09-24 15:01:19.375] Write at address 0x00600018 (0xffff91b1f018): 0x00400040, readback 0x00400040 [2025-09-24 15:01:19.375] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:01:19.375] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:01:19.439] Loaded PowerVR consumer services. [2025-09-24 15:01:19.624] Waiting data available... [2025-09-24 15:01:19.624] 512+0 records in [2025-09-24 15:01:19.624] 512+0 records out [2025-09-24 15:01:19.656] Starting syslogd/klogd: done [2025-09-24 15:01:19.672] DML Start [2025-09-24 15:01:19.833] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:01:20.056] DML res1: 0 [2025-09-24 15:01:20.557] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:01:20.557] Read Success [2025-09-24 15:01:20.557] Verifying certificate... [2025-09-24 15:01:20.780] Verified OK [2025-09-24 15:01:20.796] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:01:22.634] Verified OK [2025-09-24 15:01:22.634] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:01:23.171] Verified OK [2025-09-24 15:01:23.171] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:01:25.713] fs.protected_hardlinks = 1 [2025-09-24 15:01:25.713] fs.protected_symlinks = 1 [2025-09-24 15:01:25.729] kernel.modules_disabled = 1 [2025-09-24 15:01:25.937] [2025-09-24 15:01:25.937] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:01:27.129] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:01:34.857] SBL1:1210.0.1.0 [2025-09-24 15:01:34.889] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:01:36.472] SBL2:1210.0.1.0 [2025-09-24 15:01:36.504] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:01:36.616] j-A [2025-09-24 15:01:43.988] The R5 Autosar Classic is running [2025-09-24 15:01:43.988] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:01:43.988] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:01:44.596] INIT: version 2.96 booting [2025-09-24 15:01:44.708] INIT: Entering runlevel: 5 [2025-09-24 15:01:44.867] mtd28 attached [2025-09-24 15:01:44.867] mtd24 attached [2025-09-24 15:01:44.883] mtd32 attached [2025-09-24 15:01:45.000] RTNETLINK answers: File exists [2025-09-24 15:01:45.000] ubi0:animations is mounted. [2025-09-24 15:01:45.000] ubi2:dml_code is mounted. [2025-09-24 15:01:45.000] ubi1:textures is mounted. [2025-09-24 15:01:45.000] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:01:45.000] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:01:45.000] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:01:45.000] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:01:45.000] data.LB_FadeInType0=100 [2025-09-24 15:01:45.000] data.CHLH_FadeInType0=0 [2025-09-24 15:01:45.000] data.WU_FadeInDelay=0 [2025-09-24 15:01:45.000] max_time_out=0 [2025-09-24 15:01:45.000] No splash screen [2025-09-24 15:01:45.000] stop dss Done [2025-09-24 15:01:45.000] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:01:45.099] /dev/mem opened. [2025-09-24 15:01:45.099] Memory mapped at address 0xffff8fce3000. [2025-09-24 15:01:45.099] Read at address 0x00600018 (0xffff8fce3018): 0x00000000 [2025-09-24 15:01:45.099] Write at address 0x00600018 (0xffff8fce3018): 0x00400040, readback 0x00400040 [2025-09-24 15:01:45.099] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:01:45.099] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:01:45.210] Loaded PowerVR consumer services. [2025-09-24 15:01:45.351] Waiting data available... [2025-09-24 15:01:45.351] 512+0 records in [2025-09-24 15:01:45.351] 512+0 records out [2025-09-24 15:01:45.382] Starting syslogd/klogd: done [2025-09-24 15:01:45.398] DML Start [2025-09-24 15:01:45.591] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:01:45.799] DML res1: 0 [2025-09-24 15:01:46.257] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:01:46.257] Read Success [2025-09-24 15:01:46.257] Verifying certificate... [2025-09-24 15:01:46.513] Verified OK [2025-09-24 15:01:46.528] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:01:48.254] Verified OK [2025-09-24 15:01:48.254] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:01:48.876] Verified OK [2025-09-24 15:01:48.876] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:01:51.386] fs.protected_hardlinks = 1 [2025-09-24 15:01:51.402] fs.protected_symlinks = 1 [2025-09-24 15:01:51.402] kernel.modules_disabled = 1 [2025-09-24 15:01:51.594] [2025-09-24 15:01:51.594] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:01:52.809] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:02:00.561] SBL1:1210.0.1.0 [2025-09-24 15:02:00.608] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:02:02.175] SBL2:1210.0.1.0 [2025-09-24 15:02:02.223] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:02:02.318] j-A [2025-09-24 15:02:09.673] The R5 Autosar Classic is running [2025-09-24 15:02:09.698] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:02:09.698] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:02:10.305] INIT: version 2.96 booting [2025-09-24 15:02:10.402] INIT: Entering runlevel: 5 [2025-09-24 15:02:10.561] mtd28 attached [2025-09-24 15:02:10.577] mtd24 attached [2025-09-24 15:02:10.593] mtd32 attached [2025-09-24 15:02:10.609] ubi0:animations is mounted. [2025-09-24 15:02:10.654] ubi1:textures is mounted. [2025-09-24 15:02:10.654] ubi2:dml_code is mounted. [2025-09-24 15:02:10.654] RTNETLINK answers: File exists [2025-09-24 15:02:10.708] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:02:10.708] data.LB_FadeInType0=100 [2025-09-24 15:02:10.708] data.CHLH_FadeInType0=0 [2025-09-24 15:02:10.708] data.WU_FadeInDelay=0 [2025-09-24 15:02:10.708] max_time_out=0 [2025-09-24 15:02:10.708] No splash screen [2025-09-24 15:02:10.708] stop dss Done [2025-09-24 15:02:10.708] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:02:10.708] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:02:10.708] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:02:10.708] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:02:10.766] /dev/mem opened. [2025-09-24 15:02:10.766] Memory mapped at address 0xffffb70d7000. [2025-09-24 15:02:10.766] Read at address 0x00600018 (0xffffb70d7018): 0x00000000 [2025-09-24 15:02:10.766] Write at address 0x00600018 (0xffffb70d7018): 0x00400040, readback 0x00400040 [2025-09-24 15:02:10.798] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:02:10.814] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:02:10.878] Loaded PowerVR consumer services. [2025-09-24 15:02:11.022] Waiting data available... [2025-09-24 15:02:11.022] 512+0 records in [2025-09-24 15:02:11.022] 512+0 records out [2025-09-24 15:02:11.086] Starting syslogd/klogd: done [2025-09-24 15:02:11.102] DML Start [2025-09-24 15:02:11.262] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:02:11.469] DML res1: 0 [2025-09-24 15:02:11.971] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:02:11.971] Read Success [2025-09-24 15:02:11.971] Verifying certificate... [2025-09-24 15:02:12.259] Verified OK [2025-09-24 15:02:12.275] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:02:13.950] Verified OK [2025-09-24 15:02:13.950] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:02:14.574] Verified OK [2025-09-24 15:02:14.574] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:02:17.160] fs.protected_hardlinks = 1 [2025-09-24 15:02:17.160] fs.protected_symlinks = 1 [2025-09-24 15:02:17.160] kernel.modules_disabled = 1 [2025-09-24 15:02:17.351] [2025-09-24 15:02:17.351] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:02:18.524] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:02:26.290] SBL1:1210.0.1.0 [2025-09-24 15:02:26.338] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:02:27.905] SBL2:1210.0.1.0 [2025-09-24 15:02:27.953] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:02:28.049] j-A [2025-09-24 15:02:35.404] The R5 Autosar Classic is running [2025-09-24 15:02:35.427] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:02:35.427] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:02:36.034] INIT: version 2.96 booting [2025-09-24 15:02:36.146] INIT: Entering runlevel: 5 [2025-09-24 15:02:36.306] mtd32 attached [2025-09-24 15:02:36.306] mtd24 attached [2025-09-24 15:02:36.322] mtd28 attached [2025-09-24 15:02:36.370] ubi0:dml_code is mounted. [2025-09-24 15:02:36.370] RTNETLINK answers: File exists [2025-09-24 15:02:36.433] ubi1:textures is mounted. [2025-09-24 15:02:36.433] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:02:36.433] ubi2:animations is mounted. [2025-09-24 15:02:36.433] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:02:36.433] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:02:36.433] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:02:36.433] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:02:36.433] data.LB_FadeInType0=100 [2025-09-24 15:02:36.433] data.CHLH_FadeInType0=0 [2025-09-24 15:02:36.433] data.WU_FadeInDelay=0 [2025-09-24 15:02:36.433] max_time_out=0 [2025-09-24 15:02:36.433] No splash screen [2025-09-24 15:02:36.433] stop dss Done [2025-09-24 15:02:36.465] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:02:36.481] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:02:36.515] /dev/mem opened. [2025-09-24 15:02:36.515] Memory mapped at address 0xffffba1a1000. [2025-09-24 15:02:36.515] Read at address 0x00600018 (0xffffba1a1018): 0x00000000 [2025-09-24 15:02:36.515] Write at address 0x00600018 (0xffffba1a1018): 0x00400040, readback 0x00400040 [2025-09-24 15:02:36.787] Loaded PowerVR consumer services. [2025-09-24 15:02:36.803] Waiting data available... [2025-09-24 15:02:36.819] 512+0 records in [2025-09-24 15:02:36.819] 512+0 records out [2025-09-24 15:02:36.851] Starting syslogd/klogd: done [2025-09-24 15:02:36.867] DML Start [2025-09-24 15:02:37.010] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:02:37.282] DML res1: 0 [2025-09-24 15:02:37.634] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:02:37.655] Read Success [2025-09-24 15:02:37.655] Verifying certificate... [2025-09-24 15:02:37.895] Verified OK [2025-09-24 15:02:37.911] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:02:39.440] Verified OK [2025-09-24 15:02:39.440] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:02:40.016] Verified OK [2025-09-24 15:02:40.016] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:02:42.891] fs.protected_hardlinks = 1 [2025-09-24 15:02:42.891] fs.protected_symlinks = 1 [2025-09-24 15:02:42.891] kernel.modules_disabled = 1 [2025-09-24 15:02:43.067] [2025-09-24 15:02:43.067] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:02:44.301] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:02:52.032] SBL1:1210.0.1.0 [2025-09-24 15:02:52.064] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:02:53.647] SBL2:1210.0.1.0 [2025-09-24 15:02:53.678] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:02:53.791] j-A [2025-09-24 15:03:01.163] The R5 Autosar Classic is running [2025-09-24 15:03:01.163] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:03:01.163] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:03:01.770] INIT: version 2.96 booting [2025-09-24 15:03:01.882] INIT: Entering runlevel: 5 [2025-09-24 15:03:02.026] mtd24 attached [2025-09-24 15:03:02.042] mtd28 attached [2025-09-24 15:03:02.058] mtd32 attached [2025-09-24 15:03:02.090] ubi0:textures is mounted. [2025-09-24 15:03:02.106] ubi1:animations is mounted. [2025-09-24 15:03:02.106] RTNETLINK answers: File exists [2025-09-24 15:03:02.164] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:03:02.164] ubi2:dml_code is mounted. [2025-09-24 15:03:02.164] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:03:02.164] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:03:02.164] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:03:02.164] data.LB_FadeInType0=100 [2025-09-24 15:03:02.164] data.CHLH_FadeInType0=0 [2025-09-24 15:03:02.164] data.WU_FadeInDelay=0 [2025-09-24 15:03:02.164] max_time_out=0 [2025-09-24 15:03:02.164] No splash screen [2025-09-24 15:03:02.164] stop dss Done [2025-09-24 15:03:02.164] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:03:02.257] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:03:02.257] /dev/mem opened. [2025-09-24 15:03:02.257] Memory mapped at address 0xffffb2cfd000. [2025-09-24 15:03:02.257] Read at address 0x00600018 (0xffffb2cfd018): 0x00000000 [2025-09-24 15:03:02.257] Write at address 0x00600018 (0xffffb2cfd018): 0x00400040, readback 0x00400040 [2025-09-24 15:03:02.257] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:03:02.465] Loaded PowerVR consumer services. [2025-09-24 15:03:02.497] Waiting data available... [2025-09-24 15:03:02.529] 512+0 records in [2025-09-24 15:03:02.529] 512+0 records out [2025-09-24 15:03:02.544] Starting syslogd/klogd: done [2025-09-24 15:03:02.560] DML Start [2025-09-24 15:03:02.769] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:03:02.992] DML res1: 0 [2025-09-24 15:03:03.405] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:03:03.405] Read Success [2025-09-24 15:03:03.405] Verifying certificate... [2025-09-24 15:03:03.645] Verified OK [2025-09-24 15:03:03.661] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:03:05.175] Verified OK [2025-09-24 15:03:05.175] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:03:05.814] Verified OK [2025-09-24 15:03:05.814] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:03:08.645] fs.protected_hardlinks = 1 [2025-09-24 15:03:08.660] fs.protected_symlinks = 1 [2025-09-24 15:03:08.660] kernel.modules_disabled = 1 [2025-09-24 15:03:08.852] [2025-09-24 15:03:08.852] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:03:10.066] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:03:17.748] SBL1:1210.0.1.0 [2025-09-24 15:03:17.781] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:03:19.364] SBL2:1210.0.1.0 [2025-09-24 15:03:19.396] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:03:19.507] j-A [2025-09-24 15:03:26.880] The R5 Autosar Classic is running [2025-09-24 15:03:26.880] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:03:26.880] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:03:27.488] INIT: version 2.96 booting [2025-09-24 15:03:27.600] INIT: Entering runlevel: 5 [2025-09-24 15:03:27.759] mtd28 attached [2025-09-24 15:03:27.759] mtd32 attached [2025-09-24 15:03:27.775] mtd24 attached [2025-09-24 15:03:27.884] RTNETLINK answers: File exists [2025-09-24 15:03:27.884] ubi1:dml_code is mounted. [2025-09-24 15:03:27.884] ubi0:animations is mounted. [2025-09-24 15:03:27.884] ubi2:textures is mounted. [2025-09-24 15:03:27.884] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:03:27.884] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:03:27.884] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:03:27.884] data.LB_FadeInType0=100 [2025-09-24 15:03:27.884] data.CHLH_FadeInType0=0 [2025-09-24 15:03:27.884] data.WU_FadeInDelay=0 [2025-09-24 15:03:27.884] max_time_out=0 [2025-09-24 15:03:27.884] No splash screen [2025-09-24 15:03:27.884] stop dss Done [2025-09-24 15:03:27.884] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:03:27.884] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:03:27.958] /dev/mem opened. [2025-09-24 15:03:27.958] Memory mapped at address 0xffff9d10d000. [2025-09-24 15:03:27.958] Read at address 0x00600018 (0xffff9d10d018): 0x00000000 [2025-09-24 15:03:27.958] Write at address 0x00600018 (0xffff9d10d018): 0x00400040, readback 0x00400040 [2025-09-24 15:03:27.989] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:03:28.005] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:03:28.118] Loaded PowerVR consumer services. [2025-09-24 15:03:28.241] Waiting data available... [2025-09-24 15:03:28.241] 512+0 records in [2025-09-24 15:03:28.241] 512+0 records out [2025-09-24 15:03:28.273] Starting syslogd/klogd: done [2025-09-24 15:03:28.289] DML Start [2025-09-24 15:03:28.465] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:03:28.673] DML res1: 0 [2025-09-24 15:03:29.161] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:03:29.161] Read Success [2025-09-24 15:03:29.161] Verifying certificate... [2025-09-24 15:03:29.465] Verified OK [2025-09-24 15:03:29.481] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:03:31.111] Verified OK [2025-09-24 15:03:31.111] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:03:31.734] Verified OK [2025-09-24 15:03:31.734] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:03:34.356] fs.protected_hardlinks = 1 [2025-09-24 15:03:34.356] fs.protected_symlinks = 1 [2025-09-24 15:03:34.372] kernel.modules_disabled = 1 [2025-09-24 15:03:34.563] [2025-09-24 15:03:34.563] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:03:35.715] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:03:43.472] SBL1:1210.0.1.0 [2025-09-24 15:03:43.504] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:03:45.087] SBL2:1210.0.1.0 [2025-09-24 15:03:45.119] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:03:45.231] j-A [2025-09-24 15:03:52.605] The R5 Autosar Classic is running [2025-09-24 15:03:52.605] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:03:52.605] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:03:53.213] INIT: version 2.96 booting [2025-09-24 15:03:53.324] INIT: Entering runlevel: 5 [2025-09-24 15:03:53.469] mtd24 attached [2025-09-24 15:03:53.485] mtd28 attached [2025-09-24 15:03:53.501] mtd32 attached [2025-09-24 15:03:53.517] ubi0:textures is mounted. [2025-09-24 15:03:53.549] ubi1:animations is mounted. [2025-09-24 15:03:53.549] RTNETLINK answers: File exists [2025-09-24 15:03:53.600] ubi2:dml_code is mounted. [2025-09-24 15:03:53.600] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:03:53.600] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:03:53.600] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:03:53.600] data.LB_FadeInType0=100 [2025-09-24 15:03:53.600] data.CHLH_FadeInType0=0 [2025-09-24 15:03:53.600] data.WU_FadeInDelay=0 [2025-09-24 15:03:53.600] max_time_out=0 [2025-09-24 15:03:53.600] No splash screen [2025-09-24 15:03:53.600] stop dss Done [2025-09-24 15:03:53.600] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:03:53.600] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:03:53.666] /dev/mem opened. [2025-09-24 15:03:53.666] Memory mapped at address 0xffff9c547000. [2025-09-24 15:03:53.666] Read at address 0x00600018 (0xffff9c547018): 0x00000000 [2025-09-24 15:03:53.666] Write at address 0x00600018 (0xffff9c547018): 0x00400040, readback 0x00400040 [2025-09-24 15:03:53.681] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:03:53.681] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:03:53.938] Loaded PowerVR consumer services. [2025-09-24 15:03:53.954] Waiting data available... [2025-09-24 15:03:53.986] 512+0 records in [2025-09-24 15:03:53.986] 512+0 records out [2025-09-24 15:03:54.017] Starting syslogd/klogd: done [2025-09-24 15:03:54.034] DML Start [2025-09-24 15:03:54.194] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:03:54.434] DML res1: 0 [2025-09-24 15:03:54.865] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:03:54.882] Read Success [2025-09-24 15:03:54.882] Verifying certificate... [2025-09-24 15:03:55.105] Verified OK [2025-09-24 15:03:55.121] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:03:56.811] Verified OK [2025-09-24 15:03:56.811] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:03:57.396] Verified OK [2025-09-24 15:03:57.396] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:04:00.067] fs.protected_hardlinks = 1 [2025-09-24 15:04:00.067] fs.protected_symlinks = 1 [2025-09-24 15:04:00.083] kernel.modules_disabled = 1 [2025-09-24 15:04:00.275] [2025-09-24 15:04:00.275] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:04:01.471] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:04:09.194] SBL1:1210.0.1.0 [2025-09-24 15:04:09.225] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:04:10.808] SBL2:1210.0.1.0 [2025-09-24 15:04:10.840] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:04:10.952] j-A [2025-09-24 15:04:18.327] The R5 Autosar Classic is running [2025-09-24 15:04:18.327] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:04:18.327] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:04:18.935] INIT: version 2.96 booting [2025-09-24 15:04:19.047] INIT: Entering runlevel: 5 [2025-09-24 15:04:19.207] mtd32 attached [2025-09-24 15:04:19.223] mtd28 attached [2025-09-24 15:04:19.223] mtd24 attached [2025-09-24 15:04:19.334] ubi0:dml_code is mounted. [2025-09-24 15:04:19.334] RTNETLINK answers: File exists [2025-09-24 15:04:19.334] ubi2:textures is mounted. [2025-09-24 15:04:19.334] ubi1:animations is mounted. [2025-09-24 15:04:19.334] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:04:19.334] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:04:19.334] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:04:19.334] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:04:19.334] data.LB_FadeInType0=100 [2025-09-24 15:04:19.334] data.CHLH_FadeInType0=0 [2025-09-24 15:04:19.334] data.WU_FadeInDelay=0 [2025-09-24 15:04:19.334] max_time_out=0 [2025-09-24 15:04:19.334] No splash screen [2025-09-24 15:04:19.334] stop dss Done [2025-09-24 15:04:19.334] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:04:19.419] /dev/mem opened. [2025-09-24 15:04:19.419] Memory mapped at address 0xffff95f3b000. [2025-09-24 15:04:19.419] Read at address 0x00600018 (0xffff95f3b018): 0x00000000 [2025-09-24 15:04:19.419] Write at address 0x00600018 (0xffff95f3b018): 0x00400040, readback 0x00400040 [2025-09-24 15:04:19.419] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:04:19.435] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:04:19.563] Loaded PowerVR consumer services. [2025-09-24 15:04:19.675] Waiting data available... [2025-09-24 15:04:19.691] 512+0 records in [2025-09-24 15:04:19.691] 512+0 records out [2025-09-24 15:04:19.739] Starting syslogd/klogd: done [2025-09-24 15:04:19.771] DML Start [2025-09-24 15:04:19.931] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:04:20.107] DML res1: 0 [2025-09-24 15:04:20.594] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:04:20.594] Read Success [2025-09-24 15:04:20.594] Verifying certificate... [2025-09-24 15:04:20.817] Verified OK [2025-09-24 15:04:20.833] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:04:22.503] Verified OK [2025-09-24 15:04:22.503] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:04:23.153] Verified OK [2025-09-24 15:04:23.153] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:04:25.743] fs.protected_hardlinks = 1 [2025-09-24 15:04:25.771] fs.protected_symlinks = 1 [2025-09-24 15:04:25.771] kernel.modules_disabled = 1 [2025-09-24 15:04:25.962] [2025-09-24 15:04:25.962] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:04:27.166] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:04:34.916] SBL1:1210.0.1.0 [2025-09-24 15:04:34.964] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:04:36.530] SBL2:1210.0.1.0 [2025-09-24 15:04:36.578] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:04:36.674] j-A [2025-09-24 15:04:44.030] The R5 Autosar Classic is running [2025-09-24 15:04:44.054] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:04:44.054] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:04:44.661] INIT: version 2.96 booting [2025-09-24 15:04:44.773] INIT: Entering runlevel: 5 [2025-09-24 15:04:44.917] mtd24 attached [2025-09-24 15:04:44.933] mtd28 attached [2025-09-24 15:04:44.949] mtd32 attached [2025-09-24 15:04:44.997] ubi0:textures is mounted. [2025-09-24 15:04:44.997] RTNETLINK answers: File exists [2025-09-24 15:04:45.056] ubi1:animations is mounted. [2025-09-24 15:04:45.056] ubi2:dml_code is mounted. [2025-09-24 15:04:45.056] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:04:45.056] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:04:45.056] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:04:45.056] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:04:45.056] data.LB_FadeInType0=100 [2025-09-24 15:04:45.056] data.CHLH_FadeInType0=0 [2025-09-24 15:04:45.056] data.WU_FadeInDelay=0 [2025-09-24 15:04:45.056] max_time_out=0 [2025-09-24 15:04:45.056] No splash screen [2025-09-24 15:04:45.056] stop dss Done [2025-09-24 15:04:45.056] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:04:45.125] /dev/mem opened. [2025-09-24 15:04:45.125] Memory mapped at address 0xffffa7d26000. [2025-09-24 15:04:45.125] Read at address 0x00600018 (0xffffa7d26018): 0x00000000 [2025-09-24 15:04:45.125] Write at address 0x00600018 (0xffffa7d26018): 0x00400040, readback 0x00400040 [2025-09-24 15:04:45.125] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:04:45.153] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:04:45.217] Loaded PowerVR consumer services. [2025-09-24 15:04:45.393] Waiting data available... [2025-09-24 15:04:45.409] 512+0 records in [2025-09-24 15:04:45.409] 512+0 records out [2025-09-24 15:04:45.457] Starting syslogd/klogd: done [2025-09-24 15:04:45.473] DML Start [2025-09-24 15:04:45.616] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:04:45.857] DML res1: 0 [2025-09-24 15:04:46.284] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:04:46.284] Read Success [2025-09-24 15:04:46.284] Verifying certificate... [2025-09-24 15:04:46.524] Verified OK [2025-09-24 15:04:46.540] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:04:48.161] Verified OK [2025-09-24 15:04:48.161] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:04:48.796] Verified OK [2025-09-24 15:04:48.796] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:04:51.467] fs.protected_hardlinks = 1 [2025-09-24 15:04:51.467] fs.protected_symlinks = 1 [2025-09-24 15:04:51.483] kernel.modules_disabled = 1 [2025-09-24 15:04:51.658] [2025-09-24 15:04:51.659] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:04:52.963] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:05:00.651] SBL1:1210.0.1.0 [2025-09-24 15:05:00.699] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:05:02.266] SBL2:1210.0.1.0 [2025-09-24 15:05:02.314] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:05:02.426] j-A [2025-09-24 15:05:09.766] The R5 Autosar Classic is running [2025-09-24 15:05:09.797] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:05:09.797] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:05:10.404] INIT: version 2.96 booting [2025-09-24 15:05:10.516] INIT: Entering runlevel: 5 [2025-09-24 15:05:10.659] mtd24 attached [2025-09-24 15:05:10.675] mtd28 attached [2025-09-24 15:05:10.692] mtd32 attached [2025-09-24 15:05:10.740] RTNETLINK answers: File exists [2025-09-24 15:05:10.740] ubi0:textures is mounted. [2025-09-24 15:05:10.780] ubi1:animations is mounted. [2025-09-24 15:05:10.780] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:05:10.780] ubi2:dml_code is mounted. [2025-09-24 15:05:10.780] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:05:10.780] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:05:10.780] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:05:10.780] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:05:10.804] data.LB_FadeInType0=100 [2025-09-24 15:05:10.804] data.CHLH_FadeInType0=0 [2025-09-24 15:05:10.804] data.WU_FadeInDelay=0 [2025-09-24 15:05:10.804] max_time_out=0 [2025-09-24 15:05:10.804] No splash screen [2025-09-24 15:05:10.804] stop dss Done [2025-09-24 15:05:10.852] /dev/mem opened. [2025-09-24 15:05:10.878] Memory mapped at address 0xffffad5d7000. [2025-09-24 15:05:10.878] Read at address 0x00600018 (0xffffad5d7018): 0x00000000 [2025-09-24 15:05:10.878] Write at address 0x00600018 (0xffffad5d7018): 0x00400040, readback 0x00400040 [2025-09-24 15:05:10.909] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:05:10.925] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:05:11.133] Loaded PowerVR consumer services. [2025-09-24 15:05:11.181] 512+0 records in [2025-09-24 15:05:11.181] 512+0 records out [2025-09-24 15:05:11.197] Waiting data available... [2025-09-24 15:05:11.229] Starting syslogd/klogd: done [2025-09-24 15:05:11.245] DML Start [2025-09-24 15:05:11.422] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:05:11.582] DML res1: 0 [2025-09-24 15:05:12.151] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:05:12.151] Read Success [2025-09-24 15:05:12.151] Verifying certificate... [2025-09-24 15:05:12.375] Verified OK [2025-09-24 15:05:12.407] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:05:14.182] Verified OK [2025-09-24 15:05:14.182] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:05:14.754] Verified OK [2025-09-24 15:05:14.754] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:05:17.185] fs.protected_hardlinks = 1 [2025-09-24 15:05:17.202] fs.protected_symlinks = 1 [2025-09-24 15:05:17.217] kernel.modules_disabled = 1 [2025-09-24 15:05:17.409] [2025-09-24 15:05:17.409] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:05:18.678] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:05:26.386] SBL1:1210.0.1.0 [2025-09-24 15:05:26.434] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:05:28.000] SBL2:1210.0.1.0 [2025-09-24 15:05:28.048] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:05:28.144] j-A [2025-09-24 15:05:35.499] The R5 Autosar Classic is running [2025-09-24 15:05:35.523] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:05:35.523] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:05:36.130] INIT: version 2.96 booting [2025-09-24 15:05:36.242] INIT: Entering runlevel: 5 [2025-09-24 15:05:36.386] mtd28 attached [2025-09-24 15:05:36.402] mtd24 attached [2025-09-24 15:05:36.434] mtd32 attached [2025-09-24 15:05:36.450] ubi0:animations is mounted. [2025-09-24 15:05:36.466] ubi1:textures is mounted. [2025-09-24 15:05:36.466] RTNETLINK answers: File exists [2025-09-24 15:05:36.522] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:05:36.522] ubi2:dml_code is mounted. [2025-09-24 15:05:36.522] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:05:36.522] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:05:36.522] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:05:36.522] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:05:36.522] data.LB_FadeInType0=100 [2025-09-24 15:05:36.522] data.CHLH_FadeInType0=0 [2025-09-24 15:05:36.522] data.WU_FadeInDelay=0 [2025-09-24 15:05:36.522] max_time_out=0 [2025-09-24 15:05:36.522] No splash screen [2025-09-24 15:05:36.522] stop dss Done [2025-09-24 15:05:36.570] /dev/mem opened. [2025-09-24 15:05:36.570] Memory mapped at address 0xffffbe22d000. [2025-09-24 15:05:36.607] Read at address 0x00600018 (0xffffbe22d018): 0x00000000 [2025-09-24 15:05:36.607] Write at address 0x00600018 (0xffffbe22d018): 0x00400040, readback 0x00400040 [2025-09-24 15:05:36.607] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:05:36.607] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:05:36.767] Loaded PowerVR consumer services. [2025-09-24 15:05:36.878] Waiting data available... [2025-09-24 15:05:36.894] 512+0 records in [2025-09-24 15:05:36.894] 512+0 records out [2025-09-24 15:05:36.943] Starting syslogd/klogd: done [2025-09-24 15:05:36.959] DML Start [2025-09-24 15:05:37.119] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:05:37.310] DML res1: 0 [2025-09-24 15:05:37.822] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:05:37.843] Read Success [2025-09-24 15:05:37.843] Verifying certificate... [2025-09-24 15:05:38.067] Verified OK [2025-09-24 15:05:38.083] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:05:39.580] Verified OK [2025-09-24 15:05:39.580] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:05:40.199] Verified OK [2025-09-24 15:05:40.199] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:05:42.897] fs.protected_hardlinks = 1 [2025-09-24 15:05:42.897] fs.protected_symlinks = 1 [2025-09-24 15:05:42.897] kernel.modules_disabled = 1 [2025-09-24 15:05:43.073] [2025-09-24 15:05:43.073] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:05:44.391] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:05:52.102] SBL1:1210.0.1.0 [2025-09-24 15:05:52.134] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:05:53.716] SBL2:1210.0.1.0 [2025-09-24 15:05:53.748] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:05:53.861] j-A [2025-09-24 15:06:01.235] The R5 Autosar Classic is running [2025-09-24 15:06:01.235] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:06:01.235] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:06:01.843] INIT: version 2.96 booting [2025-09-24 15:06:01.955] INIT: Entering runlevel: 5 [2025-09-24 15:06:02.098] mtd24 attached [2025-09-24 15:06:02.114] mtd28 attached [2025-09-24 15:06:02.130] mtd32 attached [2025-09-24 15:06:02.233] RTNETLINK answers: File exists [2025-09-24 15:06:02.233] ubi0:textures is mounted. [2025-09-24 15:06:02.233] ubi1:animations is mounted. [2025-09-24 15:06:02.233] ubi2:dml_code is mounted. [2025-09-24 15:06:02.233] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:06:02.233] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:06:02.233] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:06:02.233] data.LB_FadeInType0=100 [2025-09-24 15:06:02.233] data.CHLH_FadeInType0=0 [2025-09-24 15:06:02.233] data.WU_FadeInDelay=0 [2025-09-24 15:06:02.233] max_time_out=0 [2025-09-24 15:06:02.233] No splash screen [2025-09-24 15:06:02.233] stop dss Done [2025-09-24 15:06:02.233] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:06:02.233] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:06:02.297] /dev/mem opened. [2025-09-24 15:06:02.297] Memory mapped at address 0xffff99bd6000. [2025-09-24 15:06:02.297] Read at address 0x00600018 (0xffff99bd6018): 0x00000000 [2025-09-24 15:06:02.297] Write at address 0x00600018 (0xffff99bd6018): 0x00400040, readback 0x00400040 [2025-09-24 15:06:02.297] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:06:02.313] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:06:02.473] Loaded PowerVR consumer services. [2025-09-24 15:06:02.568] Waiting data available... [2025-09-24 15:06:02.584] 512+0 records in [2025-09-24 15:06:02.584] 512+0 records out [2025-09-24 15:06:02.632] Starting syslogd/klogd: done [2025-09-24 15:06:02.664] DML Start [2025-09-24 15:06:02.841] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:06:03.048] DML res1: 0 [2025-09-24 15:06:03.528] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:06:03.550] Read Success [2025-09-24 15:06:03.550] Verifying certificate... [2025-09-24 15:06:03.838] Verified OK [2025-09-24 15:06:03.854] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:06:05.604] Verified OK [2025-09-24 15:06:05.604] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:06:06.145] Verified OK [2025-09-24 15:06:06.145] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:06:08.559] fs.protected_hardlinks = 1 [2025-09-24 15:06:08.559] fs.protected_symlinks = 1 [2025-09-24 15:06:08.575] kernel.modules_disabled = 1 [2025-09-24 15:06:08.767] [2025-09-24 15:06:08.767] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:06:10.060] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:06:17.840] SBL1:1210.0.1.0 [2025-09-24 15:06:17.888] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:06:19.454] SBL2:1210.0.1.0 [2025-09-24 15:06:19.502] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:06:19.599] j-A [2025-09-24 15:06:26.953] The R5 Autosar Classic is running [2025-09-24 15:06:26.978] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:06:26.978] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:06:27.586] INIT: version 2.96 booting [2025-09-24 15:06:27.698] INIT: Entering runlevel: 5 [2025-09-24 15:06:27.857] mtd24 attached [2025-09-24 15:06:27.873] mtd28 attached [2025-09-24 15:06:27.889] mtd32 attached [2025-09-24 15:06:27.921] ubi0:textures is mounted. [2025-09-24 15:06:27.992] RTNETLINK answers: File exists [2025-09-24 15:06:27.992] ubi1:animations is mounted. [2025-09-24 15:06:27.992] ubi2:dml_code is mounted. [2025-09-24 15:06:27.992] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:06:27.992] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:06:27.992] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:06:27.992] data.LB_FadeInType0=100 [2025-09-24 15:06:27.992] data.CHLH_FadeInType0=0 [2025-09-24 15:06:27.992] data.WU_FadeInDelay=0 [2025-09-24 15:06:27.992] max_time_out=0 [2025-09-24 15:06:27.992] No splash screen [2025-09-24 15:06:27.992] stop dss Done [2025-09-24 15:06:27.992] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:06:27.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:06:28.024] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:06:28.024] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:06:28.060] /dev/mem opened. [2025-09-24 15:06:28.060] Memory mapped at address 0xffffbad43000. [2025-09-24 15:06:28.060] Read at address 0x00600018 (0xffffbad43018): 0x00000000 [2025-09-24 15:06:28.060] Write at address 0x00600018 (0xffffbad43018): 0x00400040, readback 0x00400040 [2025-09-24 15:06:28.313] Loaded PowerVR consumer services. [2025-09-24 15:06:28.313] Waiting data available... [2025-09-24 15:06:28.329] 512+0 records in [2025-09-24 15:06:28.329] 512+0 records out [2025-09-24 15:06:28.393] Starting syslogd/klogd: done [2025-09-24 15:06:28.409] DML Start [2025-09-24 15:06:28.537] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:06:28.728] DML res1: 0 [2025-09-24 15:06:29.253] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:06:29.253] Read Success [2025-09-24 15:06:29.253] Verifying certificate... [2025-09-24 15:06:29.541] Verified OK [2025-09-24 15:06:29.557] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:06:31.268] Verified OK [2025-09-24 15:06:31.268] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:06:31.881] Verified OK [2025-09-24 15:06:31.881] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:06:34.343] fs.protected_hardlinks = 1 [2025-09-24 15:06:34.343] fs.protected_symlinks = 1 [2025-09-24 15:06:34.359] kernel.modules_disabled = 1 [2025-09-24 15:06:34.550] [2025-09-24 15:06:34.551] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:06:35.812] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:06:43.568] SBL1:1210.0.1.0 [2025-09-24 15:06:43.600] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:06:45.183] SBL2:1210.0.1.0 [2025-09-24 15:06:45.215] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:06:45.327] j-A [2025-09-24 15:06:52.681] The R5 Autosar Classic is running [2025-09-24 15:06:52.681] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:06:52.702] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:06:53.310] INIT: version 2.96 booting [2025-09-24 15:06:53.421] INIT: Entering runlevel: 5 [2025-09-24 15:06:53.582] mtd24 attached [2025-09-24 15:06:53.582] mtd28 attached [2025-09-24 15:06:53.598] mtd32 attached [2025-09-24 15:06:53.630] ubi0:textures is mounted. [2025-09-24 15:06:53.646] RTNETLINK answers: File exists [2025-09-24 15:06:53.706] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:06:53.706] ubi1:animations is mounted. [2025-09-24 15:06:53.706] ubi2:dml_code is mounted. [2025-09-24 15:06:53.706] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:06:53.706] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:06:53.706] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:06:53.706] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:06:53.706] data.LB_FadeInType0=100 [2025-09-24 15:06:53.706] data.CHLH_FadeInType0=0 [2025-09-24 15:06:53.706] data.WU_FadeInDelay=0 [2025-09-24 15:06:53.706] max_time_out=0 [2025-09-24 15:06:53.706] No splash screen [2025-09-24 15:06:53.706] stop dss Done [2025-09-24 15:06:53.779] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:06:53.779] /dev/mem opened. [2025-09-24 15:06:53.779] Memory mapped at address 0xffffbe165000. [2025-09-24 15:06:53.779] Read at address 0x00600018 (0xffffbe165018): 0x00000000 [2025-09-24 15:06:53.779] Write at address 0x00600018 (0xffffbe165018): 0x00400040, readback 0x00400040 [2025-09-24 15:06:53.779] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:06:53.955] Loaded PowerVR consumer services. [2025-09-24 15:06:54.050] Waiting data available... [2025-09-24 15:06:54.066] 512+0 records in [2025-09-24 15:06:54.066] 512+0 records out [2025-09-24 15:06:54.098] Starting syslogd/klogd: done [2025-09-24 15:06:54.114] DML Start [2025-09-24 15:06:54.275] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:06:54.530] DML res1: 0 [2025-09-24 15:06:54.946] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:06:54.962] Read Success [2025-09-24 15:06:54.962] Verifying certificate... [2025-09-24 15:06:55.186] Verified OK [2025-09-24 15:06:55.186] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:06:56.729] Verified OK [2025-09-24 15:06:56.729] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:06:57.272] Verified OK [2025-09-24 15:06:57.272] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:07:00.038] fs.protected_hardlinks = 1 [2025-09-24 15:07:00.054] fs.protected_symlinks = 1 [2025-09-24 15:07:00.054] kernel.modules_disabled = 1 [2025-09-24 15:07:00.263] [2025-09-24 15:07:00.263] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:07:01.573] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:07:09.305] SBL1:1210.0.1.0 [2025-09-24 15:07:09.336] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:07:10.920] SBL2:1210.0.1.0 [2025-09-24 15:07:10.951] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:07:11.063] j-A [2025-09-24 15:07:18.437] The R5 Autosar Classic is running [2025-09-24 15:07:18.437] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:07:18.437] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:07:19.045] INIT: version 2.96 booting [2025-09-24 15:07:19.157] INIT: Entering runlevel: 5 [2025-09-24 15:07:19.301] mtd32 attached [2025-09-24 15:07:19.317] mtd24 attached [2025-09-24 15:07:19.333] mtd28 attached [2025-09-24 15:07:19.365] ubi0:dml_code is mounted. [2025-09-24 15:07:19.381] RTNETLINK answers: File exists [2025-09-24 15:07:19.443] ubi1:textures is mounted. [2025-09-24 15:07:19.443] ubi2:animations is mounted. [2025-09-24 15:07:19.443] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:07:19.443] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:07:19.443] data.LB_FadeInType0=100 [2025-09-24 15:07:19.443] data.CHLH_FadeInType0=0 [2025-09-24 15:07:19.443] data.WU_FadeInDelay=0 [2025-09-24 15:07:19.443] max_time_out=0 [2025-09-24 15:07:19.443] No splash screen [2025-09-24 15:07:19.443] stop dss Done [2025-09-24 15:07:19.443] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:07:19.443] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:07:19.443] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:07:19.474] /dev/mem opened. [2025-09-24 15:07:19.500] Memory mapped at address 0xffff84a9e000. [2025-09-24 15:07:19.500] Read at address 0x00600018 (0xffff84a9e018): 0x00000000 [2025-09-24 15:07:19.500] Write at address 0x00600018 (0xffff84a9e018): 0x00400040, readback 0x00400040 [2025-09-24 15:07:19.547] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:07:19.547] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:07:19.628] Loaded PowerVR consumer services. [2025-09-24 15:07:19.786] Waiting data available... [2025-09-24 15:07:19.786] 512+0 records in [2025-09-24 15:07:19.786] 512+0 records out [2025-09-24 15:07:19.818] Starting syslogd/klogd: done [2025-09-24 15:07:19.850] DML Start [2025-09-24 15:07:20.026] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:07:20.186] DML res1: 0 [2025-09-24 15:07:20.666] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:07:20.666] Read Success [2025-09-24 15:07:20.682] Verifying certificate... [2025-09-24 15:07:20.921] Verified OK [2025-09-24 15:07:20.921] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:07:22.628] Verified OK [2025-09-24 15:07:22.628] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:07:23.129] Verified OK [2025-09-24 15:07:23.129] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:07:25.607] fs.protected_hardlinks = 1 [2025-09-24 15:07:25.607] fs.protected_symlinks = 1 [2025-09-24 15:07:25.607] kernel.modules_disabled = 1 [2025-09-24 15:07:25.784] [2025-09-24 15:07:25.784] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:07:27.268] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:07:35.030] SBL1:1210.0.1.0 [2025-09-24 15:07:35.062] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:07:36.645] SBL2:1210.0.1.0 [2025-09-24 15:07:36.677] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:07:36.788] j-A [2025-09-24 15:07:44.162] The R5 Autosar Classic is running [2025-09-24 15:07:44.162] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:07:44.162] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:07:44.770] INIT: version 2.96 booting [2025-09-24 15:07:44.881] INIT: Entering runlevel: 5 [2025-09-24 15:07:45.026] mtd24 attached [2025-09-24 15:07:45.042] mtd28 attached [2025-09-24 15:07:45.058] mtd32 attached [2025-09-24 15:07:45.090] ubi0:textures is mounted. [2025-09-24 15:07:45.106] RTNETLINK answers: File exists [2025-09-24 15:07:45.106] ubi1:animations is mounted. [2025-09-24 15:07:45.168] ubi2:dml_code is mounted. [2025-09-24 15:07:45.168] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:07:45.168] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:07:45.168] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:07:45.168] data.LB_FadeInType0=100 [2025-09-24 15:07:45.168] data.CHLH_FadeInType0=0 [2025-09-24 15:07:45.168] data.WU_FadeInDelay=0 [2025-09-24 15:07:45.168] max_time_out=0 [2025-09-24 15:07:45.168] No splash screen [2025-09-24 15:07:45.168] stop dss Done [2025-09-24 15:07:45.168] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:07:45.168] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:07:45.199] /dev/mem opened. [2025-09-24 15:07:45.199] Memory mapped at address 0xffff913f6000. [2025-09-24 15:07:45.226] Read at address 0x00600018 (0xffff913f6018): 0x00000000 [2025-09-24 15:07:45.226] Write at address 0x00600018 (0xffff913f6018): 0x00400040, readback 0x00400040 [2025-09-24 15:07:45.258] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:07:45.273] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:07:45.369] Loaded PowerVR consumer services. [2025-09-24 15:07:45.497] Waiting data available... [2025-09-24 15:07:45.513] 512+0 records in [2025-09-24 15:07:45.513] 512+0 records out [2025-09-24 15:07:45.561] Starting syslogd/klogd: done [2025-09-24 15:07:45.577] DML Start [2025-09-24 15:07:45.769] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:07:46.008] DML res1: 0 [2025-09-24 15:07:46.406] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:07:46.406] Read Success [2025-09-24 15:07:46.406] Verifying certificate... [2025-09-24 15:07:46.661] Verified OK [2025-09-24 15:07:46.677] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:07:48.347] Verified OK [2025-09-24 15:07:48.347] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:07:48.981] Verified OK [2025-09-24 15:07:48.981] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:07:51.620] fs.protected_hardlinks = 1 [2025-09-24 15:07:51.636] fs.protected_symlinks = 1 [2025-09-24 15:07:51.636] kernel.modules_disabled = 1 [2025-09-24 15:07:51.843] [2025-09-24 15:07:51.843] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:07:53.010] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:08:00.748] SBL1:1210.0.1.0 [2025-09-24 15:08:00.780] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:08:02.363] SBL2:1210.0.1.0 [2025-09-24 15:08:02.395] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:08:02.507] j-A [2025-09-24 15:08:09.883] The R5 Autosar Classic is running [2025-09-24 15:08:09.883] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:08:09.883] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:08:10.490] INIT: version 2.96 booting [2025-09-24 15:08:10.603] INIT: Entering runlevel: 5 [2025-09-24 15:08:10.763] mtd28 attached [2025-09-24 15:08:10.779] mtd32 attached [2025-09-24 15:08:10.779] mtd24 attached [2025-09-24 15:08:10.826] ubi0:animations is mounted. [2025-09-24 15:08:10.826] RTNETLINK answers: File exists [2025-09-24 15:08:10.897] ubi1:dml_code is mounted. [2025-09-24 15:08:10.897] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:08:10.897] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:08:10.897] ubi2:textures is mounted. [2025-09-24 15:08:10.897] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:08:10.897] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:08:10.897] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:08:10.897] data.LB_FadeInType0=100 [2025-09-24 15:08:10.897] data.CHLH_FadeInType0=0 [2025-09-24 15:08:10.897] data.WU_FadeInDelay=0 [2025-09-24 15:08:10.897] max_time_out=0 [2025-09-24 15:08:10.897] No splash screen [2025-09-24 15:08:10.897] stop dss Done [2025-09-24 15:08:10.928] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:08:10.944] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:08:10.979] /dev/mem opened. [2025-09-24 15:08:10.979] Memory mapped at address 0xffffbde3c000. [2025-09-24 15:08:10.979] Read at address 0x00600018 (0xffffbde3c018): 0x00000000 [2025-09-24 15:08:10.979] Write at address 0x00600018 (0xffffbde3c018): 0x00400040, readback 0x00400040 [2025-09-24 15:08:11.091] Loaded PowerVR consumer services. [2025-09-24 15:08:11.235] Waiting data available... [2025-09-24 15:08:11.251] 512+0 records in [2025-09-24 15:08:11.251] 512+0 records out [2025-09-24 15:08:11.299] Starting syslogd/klogd: done [2025-09-24 15:08:11.315] DML Start [2025-09-24 15:08:11.491] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:08:11.731] DML res1: 0 [2025-09-24 15:08:12.146] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:08:12.163] Read Success [2025-09-24 15:08:12.163] Verifying certificate... [2025-09-24 15:08:12.449] Verified OK [2025-09-24 15:08:12.465] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:08:14.169] Verified OK [2025-09-24 15:08:14.169] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:08:14.792] Verified OK [2025-09-24 15:08:14.792] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:08:17.367] fs.protected_hardlinks = 1 [2025-09-24 15:08:17.367] fs.protected_symlinks = 1 [2025-09-24 15:08:17.383] kernel.modules_disabled = 1 [2025-09-24 15:08:17.575] [2025-09-24 15:08:17.575] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:08:18.765] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:08:26.472] SBL1:1210.0.1.0 [2025-09-24 15:08:26.520] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:08:28.087] SBL2:1210.0.1.0 [2025-09-24 15:08:28.135] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:08:28.230] j-A [2025-09-24 15:08:35.586] The R5 Autosar Classic is running [2025-09-24 15:08:35.586] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:08:35.607] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:08:36.214] INIT: version 2.96 booting [2025-09-24 15:08:36.326] INIT: Entering runlevel: 5 [2025-09-24 15:08:36.486] mtd24 attached [2025-09-24 15:08:36.486] mtd32 attached [2025-09-24 15:08:36.502] mtd28 attached [2025-09-24 15:08:36.518] ubi0:textures is mounted. [2025-09-24 15:08:36.550] RTNETLINK answers: File exists [2025-09-24 15:08:36.606] ubi2:animations is mounted. [2025-09-24 15:08:36.606] ubi1:dml_code is mounted. [2025-09-24 15:08:36.606] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:08:36.606] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:08:36.606] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:08:36.606] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:08:36.606] data.LB_FadeInType0=100 [2025-09-24 15:08:36.606] data.CHLH_FadeInType0=0 [2025-09-24 15:08:36.606] data.WU_FadeInDelay=0 [2025-09-24 15:08:36.606] max_time_out=0 [2025-09-24 15:08:36.606] No splash screen [2025-09-24 15:08:36.606] stop dss Done [2025-09-24 15:08:36.606] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:08:36.672] /dev/mem opened. [2025-09-24 15:08:36.672] Memory mapped at address 0xffffa67dc000. [2025-09-24 15:08:36.672] Read at address 0x00600018 (0xffffa67dc018): 0x00000000 [2025-09-24 15:08:36.672] Write at address 0x00600018 (0xffffa67dc018): 0x00400040, readback 0x00400040 [2025-09-24 15:08:36.672] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:08:36.688] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:08:36.927] Loaded PowerVR consumer services. [2025-09-24 15:08:36.944] Waiting data available... [2025-09-24 15:08:36.976] 512+0 records in [2025-09-24 15:08:36.976] 512+0 records out [2025-09-24 15:08:37.008] Starting syslogd/klogd: done [2025-09-24 15:08:37.024] DML Start [2025-09-24 15:08:37.183] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:08:37.376] DML res1: 0 [2025-09-24 15:08:37.964] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:08:37.964] Read Success [2025-09-24 15:08:37.964] Verifying certificate... [2025-09-24 15:08:38.268] Verified OK [2025-09-24 15:08:38.300] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:08:40.010] Verified OK [2025-09-24 15:08:40.026] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:08:40.563] Verified OK [2025-09-24 15:08:40.563] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:08:43.040] fs.protected_hardlinks = 1 [2025-09-24 15:08:43.040] fs.protected_symlinks = 1 [2025-09-24 15:08:43.056] kernel.modules_disabled = 1 [2025-09-24 15:08:43.247] [2025-09-24 15:08:43.247] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:08:44.475] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:08:52.207] SBL1:1210.0.1.0 [2025-09-24 15:08:52.255] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:08:53.822] SBL2:1210.0.1.0 [2025-09-24 15:08:53.870] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:08:53.982] j-A [2025-09-24 15:09:01.322] The R5 Autosar Classic is running [2025-09-24 15:09:01.347] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:09:01.347] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:09:01.954] INIT: version 2.96 booting [2025-09-24 15:09:02.066] INIT: Entering runlevel: 5 [2025-09-24 15:09:02.226] mtd28 attached [2025-09-24 15:09:02.226] mtd24 attached [2025-09-24 15:09:02.242] mtd32 attached [2025-09-24 15:09:02.274] ubi0:animations is mounted. [2025-09-24 15:09:02.290] RTNETLINK answers: File exists [2025-09-24 15:09:02.290] ubi1:textures is mounted. [2025-09-24 15:09:02.290] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:09:02.347] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:09:02.347] ubi2:dml_code is mounted. [2025-09-24 15:09:02.347] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:09:02.347] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:09:02.347] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:09:02.347] data.LB_FadeInType0=100 [2025-09-24 15:09:02.347] data.CHLH_FadeInType0=0 [2025-09-24 15:09:02.347] data.WU_FadeInDelay=0 [2025-09-24 15:09:02.347] max_time_out=0 [2025-09-24 15:09:02.347] No splash screen [2025-09-24 15:09:02.347] stop dss Done [2025-09-24 15:09:02.395] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:09:02.395] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:09:02.426] /dev/mem opened. [2025-09-24 15:09:02.426] Memory mapped at address 0xffffab31c000. [2025-09-24 15:09:02.426] Read at address 0x00600018 (0xffffab31c018): 0x00000000 [2025-09-24 15:09:02.426] Write at address 0x00600018 (0xffffab31c018): 0x00400040, readback 0x00400040 [2025-09-24 15:09:02.554] Loaded PowerVR consumer services. [2025-09-24 15:09:02.710] Waiting data available... [2025-09-24 15:09:02.710] 512+0 records in [2025-09-24 15:09:02.710] 512+0 records out [2025-09-24 15:09:02.742] Starting syslogd/klogd: done [2025-09-24 15:09:02.758] DML Start [2025-09-24 15:09:02.933] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:09:03.157] DML res1: 0 [2025-09-24 15:09:03.605] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:09:03.627] Read Success [2025-09-24 15:09:03.627] Verifying certificate... [2025-09-24 15:09:03.914] Verified OK [2025-09-24 15:09:03.930] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:09:05.624] Verified OK [2025-09-24 15:09:05.624] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:09:06.136] Verified OK [2025-09-24 15:09:06.136] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:09:08.630] fs.protected_hardlinks = 1 [2025-09-24 15:09:08.630] fs.protected_symlinks = 1 [2025-09-24 15:09:08.646] kernel.modules_disabled = 1 [2025-09-24 15:09:08.854] [2025-09-24 15:09:08.854] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:09:10.164] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:09:17.962] SBL1:1210.0.1.0 [2025-09-24 15:09:17.994] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:09:19.576] SBL2:1210.0.1.0 [2025-09-24 15:09:19.608] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:09:19.720] j-A [2025-09-24 15:09:27.077] The R5 Autosar Classic is running [2025-09-24 15:09:27.077] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:09:27.098] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:09:27.705] INIT: version 2.96 booting [2025-09-24 15:09:27.817] INIT: Entering runlevel: 5 [2025-09-24 15:09:27.961] mtd24 attached [2025-09-24 15:09:27.977] mtd28 attached [2025-09-24 15:09:27.993] mtd32 attached [2025-09-24 15:09:28.024] ubi0:textures is mounted. [2025-09-24 15:09:28.040] RTNETLINK answers: File exists [2025-09-24 15:09:28.099] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:09:28.099] ubi1:animations is mounted. [2025-09-24 15:09:28.099] ubi2:dml_code is mounted. [2025-09-24 15:09:28.099] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:09:28.099] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:09:28.099] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:09:28.099] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:09:28.099] data.LB_FadeInType0=100 [2025-09-24 15:09:28.099] data.CHLH_FadeInType0=0 [2025-09-24 15:09:28.099] data.WU_FadeInDelay=0 [2025-09-24 15:09:28.099] max_time_out=0 [2025-09-24 15:09:28.099] No splash screen [2025-09-24 15:09:28.099] stop dss Done [2025-09-24 15:09:28.189] /dev/mem opened. [2025-09-24 15:09:28.189] Memory mapped at address 0xffffb985e000. [2025-09-24 15:09:28.189] Read at address 0x00600018 (0xffffb985e018): 0x00000000 [2025-09-24 15:09:28.189] Write at address 0x00600018 (0xffffb985e018): 0x00400040, readback 0x00400040 [2025-09-24 15:09:28.189] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:09:28.189] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:09:28.253] Loaded PowerVR consumer services. [2025-09-24 15:09:28.429] Waiting data available... [2025-09-24 15:09:28.445] 512+0 records in [2025-09-24 15:09:28.445] 512+0 records out [2025-09-24 15:09:28.492] Starting syslogd/klogd: done [2025-09-24 15:09:28.508] DML Start [2025-09-24 15:09:28.668] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:09:28.908] DML res1: 0 [2025-09-24 15:09:29.368] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:09:29.368] Read Success [2025-09-24 15:09:29.368] Verifying certificate... [2025-09-24 15:09:29.624] Verified OK [2025-09-24 15:09:29.639] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:09:31.319] Verified OK [2025-09-24 15:09:31.319] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:09:31.921] Verified OK [2025-09-24 15:09:31.921] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:09:34.559] fs.protected_hardlinks = 1 [2025-09-24 15:09:34.589] fs.protected_symlinks = 1 [2025-09-24 15:09:34.589] kernel.modules_disabled = 1 [2025-09-24 15:09:34.781] [2025-09-24 15:09:34.781] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:09:36.007] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:09:43.674] SBL1:1210.0.1.0 [2025-09-24 15:09:43.722] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:09:45.288] SBL2:1210.0.1.0 [2025-09-24 15:09:45.336] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:09:45.432] j-A [2025-09-24 15:09:52.787] The R5 Autosar Classic is running [2025-09-24 15:09:52.810] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:09:52.810] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:09:53.417] INIT: version 2.96 booting [2025-09-24 15:09:53.529] INIT: Entering runlevel: 5 [2025-09-24 15:09:53.689] mtd28 attached [2025-09-24 15:09:53.690] mtd24 attached [2025-09-24 15:09:53.705] mtd32 attached [2025-09-24 15:09:53.721] ubi0:animations is mounted. [2025-09-24 15:09:53.753] RTNETLINK answers: File exists [2025-09-24 15:09:53.793] ubi1:textures is mounted. [2025-09-24 15:09:53.793] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:09:53.793] ubi2:dml_code is mounted. [2025-09-24 15:09:53.793] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:09:53.793] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:09:53.793] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:09:53.793] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:09:53.817] data.LB_FadeInType0=100 [2025-09-24 15:09:53.817] data.CHLH_FadeInType0=0 [2025-09-24 15:09:53.817] data.WU_FadeInDelay=0 [2025-09-24 15:09:53.817] max_time_out=0 [2025-09-24 15:09:53.817] No splash screen [2025-09-24 15:09:53.817] stop dss Done [2025-09-24 15:09:53.849] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:09:53.893] /dev/mem opened. [2025-09-24 15:09:53.893] Memory mapped at address 0xffff8407b000. [2025-09-24 15:09:53.893] Read at address 0x00600018 (0xffff8407b018): 0x00000000 [2025-09-24 15:09:53.893] Write at address 0x00600018 (0xffff8407b018): 0x00400040, readback 0x00400040 [2025-09-24 15:09:53.893] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:09:54.070] Loaded PowerVR consumer services. [2025-09-24 15:09:54.181] Waiting data available... [2025-09-24 15:09:54.197] 512+0 records in [2025-09-24 15:09:54.197] 512+0 records out [2025-09-24 15:09:54.246] Starting syslogd/klogd: done [2025-09-24 15:09:54.262] DML Start [2025-09-24 15:09:54.406] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:09:54.646] DML res1: 0 [2025-09-24 15:09:55.089] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:09:55.089] Read Success [2025-09-24 15:09:55.089] Verifying certificate... [2025-09-24 15:09:55.297] Verified OK [2025-09-24 15:09:55.313] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:09:56.878] Verified OK [2025-09-24 15:09:56.878] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:09:57.502] Verified OK [2025-09-24 15:09:57.518] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:10:00.252] fs.protected_hardlinks = 1 [2025-09-24 15:10:00.268] fs.protected_symlinks = 1 [2025-09-24 15:10:00.268] kernel.modules_disabled = 1 [2025-09-24 15:10:00.459] [2025-09-24 15:10:00.459] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:10:01.716] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:10:09.414] SBL1:1210.0.1.0 [2025-09-24 15:10:09.461] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:10:11.028] SBL2:1210.0.1.0 [2025-09-24 15:10:11.076] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:10:11.189] j-A [2025-09-24 15:10:18.528] The R5 Autosar Classic is running [2025-09-24 15:10:18.553] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:10:18.553] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:10:19.161] INIT: version 2.96 booting [2025-09-24 15:10:19.273] INIT: Entering runlevel: 5 [2025-09-24 15:10:19.417] mtd24 attached [2025-09-24 15:10:19.433] mtd28 attached [2025-09-24 15:10:19.449] mtd32 attached [2025-09-24 15:10:19.481] ubi0:textures is mounted. [2025-09-24 15:10:19.497] RTNETLINK answers: File exists [2025-09-24 15:10:19.497] ubi1:animations is mounted. [2025-09-24 15:10:19.556] ubi2:dml_code is mounted. [2025-09-24 15:10:19.556] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:10:19.556] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:10:19.556] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:10:19.556] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:10:19.556] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:10:19.556] data.LB_FadeInType0=100 [2025-09-24 15:10:19.556] data.CHLH_FadeInType0=0 [2025-09-24 15:10:19.556] data.WU_FadeInDelay=0 [2025-09-24 15:10:19.556] max_time_out=0 [2025-09-24 15:10:19.556] No splash screen [2025-09-24 15:10:19.556] stop dss Done [2025-09-24 15:10:19.588] /dev/mem opened. [2025-09-24 15:10:19.588] Memory mapped at address 0xffff989d1000. [2025-09-24 15:10:19.614] Read at address 0x00600018 (0xffff989d1018): 0x00000000 [2025-09-24 15:10:19.614] Write at address 0x00600018 (0xffff989d1018): 0x00400040, readback 0x00400040 [2025-09-24 15:10:19.629] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:10:19.645] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:10:19.726] Loaded PowerVR consumer services. [2025-09-24 15:10:19.886] Waiting data available... [2025-09-24 15:10:19.918] 512+0 records in [2025-09-24 15:10:19.918] 512+0 records out [2025-09-24 15:10:19.949] Starting syslogd/klogd: done [2025-09-24 15:10:19.981] DML Start [2025-09-24 15:10:20.158] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:10:20.381] DML res1: 0 [2025-09-24 15:10:20.854] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:10:20.854] Read Success [2025-09-24 15:10:20.854] Verifying certificate... [2025-09-24 15:10:21.110] Verified OK [2025-09-24 15:10:21.110] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:10:22.821] Verified OK [2025-09-24 15:10:22.821] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:10:23.493] Verified OK [2025-09-24 15:10:23.493] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:10:26.035] fs.protected_hardlinks = 1 [2025-09-24 15:10:26.035] fs.protected_symlinks = 1 [2025-09-24 15:10:26.051] kernel.modules_disabled = 1 [2025-09-24 15:10:26.227] [2025-09-24 15:10:26.227] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:10:27.386] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:10:35.149] SBL1:1210.0.1.0 [2025-09-24 15:10:35.197] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:10:36.764] SBL2:1210.0.1.0 [2025-09-24 15:10:36.812] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:10:36.908] j-A [2025-09-24 15:10:44.263] The R5 Autosar Classic is running [2025-09-24 15:10:44.287] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:10:44.287] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:10:44.895] INIT: version 2.96 booting [2025-09-24 15:10:45.007] INIT: Entering runlevel: 5 [2025-09-24 15:10:45.167] mtd24 attached [2025-09-24 15:10:45.167] mtd32 attached [2025-09-24 15:10:45.183] mtd28 attached [2025-09-24 15:10:45.215] ubi0:textures is mounted. [2025-09-24 15:10:45.294] RTNETLINK answers: File exists [2025-09-24 15:10:45.294] ubi2:animations is mounted. [2025-09-24 15:10:45.294] ubi1:dml_code is mounted. [2025-09-24 15:10:45.294] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:10:45.294] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:10:45.294] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:10:45.294] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:10:45.294] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:10:45.294] data.LB_FadeInType0=100 [2025-09-24 15:10:45.294] data.CHLH_FadeInType0=0 [2025-09-24 15:10:45.294] data.WU_FadeInDelay=0 [2025-09-24 15:10:45.294] max_time_out=0 [2025-09-24 15:10:45.294] No splash screen [2025-09-24 15:10:45.294] stop dss Done [2025-09-24 15:10:45.341] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:10:45.341] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:10:45.376] /dev/mem opened. [2025-09-24 15:10:45.376] Memory mapped at address 0xffff9c407000. [2025-09-24 15:10:45.376] Read at address 0x00600018 (0xffff9c407018): 0x00000000 [2025-09-24 15:10:45.376] Write at address 0x00600018 (0xffff9c407018): 0x00400040, readback 0x00400040 [2025-09-24 15:10:45.472] Loaded PowerVR consumer services. [2025-09-24 15:10:45.616] Waiting data available... [2025-09-24 15:10:45.647] 512+0 records in [2025-09-24 15:10:45.647] 512+0 records out [2025-09-24 15:10:45.679] Starting syslogd/klogd: done [2025-09-24 15:10:45.696] DML Start [2025-09-24 15:10:45.840] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:10:46.096] DML res1: 0 [2025-09-24 15:10:46.585] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:10:46.585] Read Success [2025-09-24 15:10:46.585] Verifying certificate... [2025-09-24 15:10:46.809] Verified OK [2025-09-24 15:10:46.809] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:10:48.530] Verified OK [2025-09-24 15:10:48.530] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:10:49.169] Verified OK [2025-09-24 15:10:49.169] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:10:51.808] fs.protected_hardlinks = 1 [2025-09-24 15:10:51.838] fs.protected_symlinks = 1 [2025-09-24 15:10:51.838] kernel.modules_disabled = 1 [2025-09-24 15:10:52.030] [2025-09-24 15:10:52.030] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:10:53.144] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:11:00.893] SBL1:1210.0.1.0 [2025-09-24 15:11:00.941] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:11:02.508] SBL2:1210.0.1.0 [2025-09-24 15:11:02.556] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:11:02.668] j-A [2025-09-24 15:11:10.007] The R5 Autosar Classic is running [2025-09-24 15:11:10.032] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:11:10.032] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:11:10.640] INIT: version 2.96 booting [2025-09-24 15:11:10.751] INIT: Entering runlevel: 5 [2025-09-24 15:11:10.911] mtd28 attached [2025-09-24 15:11:10.927] mtd32 attached [2025-09-24 15:11:10.927] mtd24 attached [2025-09-24 15:11:10.943] ubi0:animations is mounted. [2025-09-24 15:11:11.043] RTNETLINK answers: File exists [2025-09-24 15:11:11.043] ubi2:textures is mounted. [2025-09-24 15:11:11.043] ubi1:dml_code is mounted. [2025-09-24 15:11:11.043] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:11:11.043] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:11:11.043] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:11:11.043] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:11:11.043] data.LB_FadeInType0=100 [2025-09-24 15:11:11.043] data.CHLH_FadeInType0=0 [2025-09-24 15:11:11.043] data.WU_FadeInDelay=0 [2025-09-24 15:11:11.043] max_time_out=0 [2025-09-24 15:11:11.043] No splash screen [2025-09-24 15:11:11.043] stop dss Done [2025-09-24 15:11:11.043] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:11:11.075] /dev/mem opened. [2025-09-24 15:11:11.075] Memory mapped at address 0xffffaf14e000. [2025-09-24 15:11:11.101] Read at address 0x00600018 (0xffffaf14e018): 0x00000000 [2025-09-24 15:11:11.101] Write at address 0x00600018 (0xffffaf14e018): 0x00400040, readback 0x00400040 [2025-09-24 15:11:11.101] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:11:11.117] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:11:11.245] Loaded PowerVR consumer services. [2025-09-24 15:11:11.372] Waiting data available... [2025-09-24 15:11:11.388] 512+0 records in [2025-09-24 15:11:11.388] 512+0 records out [2025-09-24 15:11:11.404] Starting syslogd/klogd: done [2025-09-24 15:11:11.420] DML Start [2025-09-24 15:11:11.613] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:11:11.852] DML res1: 0 [2025-09-24 15:11:12.236] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:11:12.252] Read Success [2025-09-24 15:11:12.252] Verifying certificate... [2025-09-24 15:11:12.507] Verified OK [2025-09-24 15:11:12.507] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:11:14.267] Verified OK [2025-09-24 15:11:14.267] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:11:14.850] Verified OK [2025-09-24 15:11:14.850] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:11:17.313] fs.protected_hardlinks = 1 [2025-09-24 15:11:17.313] fs.protected_symlinks = 1 [2025-09-24 15:11:17.329] kernel.modules_disabled = 1 [2025-09-24 15:11:17.537] [2025-09-24 15:11:17.537] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:11:18.911] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:11:26.626] SBL1:1210.0.1.0 [2025-09-24 15:11:26.658] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:11:28.242] SBL2:1210.0.1.0 [2025-09-24 15:11:28.290] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:11:28.386] j-A [2025-09-24 15:11:35.740] The R5 Autosar Classic is running [2025-09-24 15:11:35.762] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:11:35.762] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:11:36.386] INIT: version 2.96 booting [2025-09-24 15:11:36.497] INIT: Entering runlevel: 5 [2025-09-24 15:11:36.642] mtd24 attached [2025-09-24 15:11:36.658] mtd28 attached [2025-09-24 15:11:36.658] mtd32 attached [2025-09-24 15:11:36.721] RTNETLINK answers: File exists [2025-09-24 15:11:36.721] ubi0:textures is mounted. [2025-09-24 15:11:36.777] ubi1:animations is mounted. [2025-09-24 15:11:36.777] ubi2:dml_code is mounted. [2025-09-24 15:11:36.777] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:11:36.777] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:11:36.777] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:11:36.777] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:11:36.777] data.LB_FadeInType0=100 [2025-09-24 15:11:36.777] data.CHLH_FadeInType0=0 [2025-09-24 15:11:36.777] data.WU_FadeInDelay=0 [2025-09-24 15:11:36.777] max_time_out=0 [2025-09-24 15:11:36.777] No splash screen [2025-09-24 15:11:36.777] stop dss Done [2025-09-24 15:11:36.777] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:11:36.808] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:11:36.824] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:11:36.824] /dev/mem opened. [2025-09-24 15:11:36.857] Memory mapped at address 0xffff8ccc1000. [2025-09-24 15:11:36.857] Read at address 0x00600018 (0xffff8ccc1018): 0x00000000 [2025-09-24 15:11:36.857] Write at address 0x00600018 (0xffff8ccc1018): 0x00400040, readback 0x00400040 [2025-09-24 15:11:36.953] Loaded PowerVR consumer services. [2025-09-24 15:11:37.112] Waiting data available... [2025-09-24 15:11:37.128] 512+0 records in [2025-09-24 15:11:37.128] 512+0 records out [2025-09-24 15:11:37.160] Starting syslogd/klogd: done [2025-09-24 15:11:37.192] DML Start [2025-09-24 15:11:37.352] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:11:37.576] DML res1: 0 [2025-09-24 15:11:38.028] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:11:38.028] Read Success [2025-09-24 15:11:38.028] Verifying certificate... [2025-09-24 15:11:38.284] Verified OK [2025-09-24 15:11:38.284] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:11:39.866] Verified OK [2025-09-24 15:11:39.866] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:11:40.425] Verified OK [2025-09-24 15:11:40.425] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:11:43.144] fs.protected_hardlinks = 1 [2025-09-24 15:11:43.144] fs.protected_symlinks = 1 [2025-09-24 15:11:43.160] kernel.modules_disabled = 1 [2025-09-24 15:11:43.368] [2025-09-24 15:11:43.368] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:11:44.599] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:11:52.362] SBL1:1210.0.1.0 [2025-09-24 15:11:52.394] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:11:53.976] SBL2:1210.0.1.0 [2025-09-24 15:11:54.008] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:11:54.120] j-A [2025-09-24 15:12:01.494] The R5 Autosar Classic is running [2025-09-24 15:12:01.494] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:12:01.494] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:12:02.101] INIT: version 2.96 booting [2025-09-24 15:12:02.213] INIT: Entering runlevel: 5 [2025-09-24 15:12:02.373] mtd32 attached [2025-09-24 15:12:02.373] mtd24 attached [2025-09-24 15:12:02.389] mtd28 attached [2025-09-24 15:12:02.437] ubi1:textures is mounted. [2025-09-24 15:12:02.437] RTNETLINK answers: File exists [2025-09-24 15:12:02.437] ubi0:dml_code is mounted. [2025-09-24 15:12:02.497] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:12:02.497] ubi2:animations is mounted. [2025-09-24 15:12:02.497] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:12:02.497] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:12:02.497] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:12:02.497] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:12:02.497] data.LB_FadeInType0=100 [2025-09-24 15:12:02.497] data.CHLH_FadeInType0=0 [2025-09-24 15:12:02.497] data.WU_FadeInDelay=0 [2025-09-24 15:12:02.497] max_time_out=0 [2025-09-24 15:12:02.497] No splash screen [2025-09-24 15:12:02.497] stop dss Done [2025-09-24 15:12:02.545] /dev/mem opened. [2025-09-24 15:12:02.571] Memory mapped at address 0xffffa0c63000. [2025-09-24 15:12:02.571] Read at address 0x00600018 (0xffffa0c63018): 0x00000000 [2025-09-24 15:12:02.571] Write at address 0x00600018 (0xffffa0c63018): 0x00400040, readback 0x00400040 [2025-09-24 15:12:02.603] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:12:02.619] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:12:02.843] Loaded PowerVR consumer services. [2025-09-24 15:12:02.884] Waiting data available... [2025-09-24 15:12:02.884] 512+0 records in [2025-09-24 15:12:02.884] 512+0 records out [2025-09-24 15:12:02.916] Starting syslogd/klogd: done [2025-09-24 15:12:02.932] DML Start [2025-09-24 15:12:03.107] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:12:03.331] DML res1: 0 [2025-09-24 15:12:03.789] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:12:03.789] Read Success [2025-09-24 15:12:03.789] Verifying certificate... [2025-09-24 15:12:04.045] Verified OK [2025-09-24 15:12:04.061] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:12:05.810] Verified OK [2025-09-24 15:12:05.810] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:12:06.354] Verified OK [2025-09-24 15:12:06.354] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:12:08.865] fs.protected_hardlinks = 1 [2025-09-24 15:12:08.881] fs.protected_symlinks = 1 [2025-09-24 15:12:08.881] kernel.modules_disabled = 1 [2025-09-24 15:12:09.072] [2025-09-24 15:12:09.072] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:12:10.333] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:12:18.087] SBL1:1210.0.1.0 [2025-09-24 15:12:18.135] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:12:19.701] SBL2:1210.0.1.0 [2025-09-24 15:12:19.749] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:12:19.845] j-A [2025-09-24 15:12:27.200] The R5 Autosar Classic is running [2025-09-24 15:12:27.224] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:12:27.224] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:12:27.831] INIT: version 2.96 booting [2025-09-24 15:12:27.944] INIT: Entering runlevel: 5 [2025-09-24 15:12:28.103] mtd32 attached [2025-09-24 15:12:28.103] mtd24 attached [2025-09-24 15:12:28.119] mtd28 attached [2025-09-24 15:12:28.135] ubi0:dml_code is mounted. [2025-09-24 15:12:28.202] ubi1:textures is mounted. [2025-09-24 15:12:28.202] RTNETLINK answers: File exists [2025-09-24 15:12:28.202] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:12:28.202] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:12:28.202] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:12:28.202] ubi2:animations is mounted. [2025-09-24 15:12:28.202] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:12:28.202] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:12:28.230] data.LB_FadeInType0=100 [2025-09-24 15:12:28.230] data.CHLH_FadeInType0=0 [2025-09-24 15:12:28.230] data.WU_FadeInDelay=0 [2025-09-24 15:12:28.230] max_time_out=0 [2025-09-24 15:12:28.230] No splash screen [2025-09-24 15:12:28.230] stop dss Done [2025-09-24 15:12:28.246] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:12:28.276] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:12:28.276] /dev/mem opened. [2025-09-24 15:12:28.302] Memory mapped at address 0xffff9a5ff000. [2025-09-24 15:12:28.302] Read at address 0x00600018 (0xffff9a5ff018): 0x00000000 [2025-09-24 15:12:28.302] Write at address 0x00600018 (0xffff9a5ff018): 0x00400040, readback 0x00400040 [2025-09-24 15:12:28.429] Loaded PowerVR consumer services. [2025-09-24 15:12:28.574] Waiting data available... [2025-09-24 15:12:28.590] 512+0 records in [2025-09-24 15:12:28.590] 512+0 records out [2025-09-24 15:12:28.621] Starting syslogd/klogd: done [2025-09-24 15:12:28.637] DML Start [2025-09-24 15:12:28.813] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:12:29.005] DML res1: 0 [2025-09-24 15:12:29.514] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:12:29.514] Read Success [2025-09-24 15:12:29.514] Verifying certificate... [2025-09-24 15:12:29.738] Verified OK [2025-09-24 15:12:29.754] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:12:31.432] Verified OK [2025-09-24 15:12:31.432] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:12:32.056] Verified OK [2025-09-24 15:12:32.056] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:12:34.646] fs.protected_hardlinks = 1 [2025-09-24 15:12:34.646] fs.protected_symlinks = 1 [2025-09-24 15:12:34.662] kernel.modules_disabled = 1 [2025-09-24 15:12:34.854] [2025-09-24 15:12:34.854] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:12:36.069] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:12:43.810] SBL1:1210.0.1.0 [2025-09-24 15:12:43.858] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:12:45.425] SBL2:1210.0.1.0 [2025-09-24 15:12:45.473] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:12:45.585] j-A [2025-09-24 15:12:52.954] The R5 Autosar Classic is running [2025-09-24 15:12:52.954] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:12:52.954] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:12:53.561] INIT: version 2.96 booting [2025-09-24 15:12:53.673] INIT: Entering runlevel: 5 [2025-09-24 15:12:53.833] mtd32 attached [2025-09-24 15:12:53.833] mtd28 attached [2025-09-24 15:12:53.849] mtd24 attached [2025-09-24 15:12:53.932] RTNETLINK answers: File exists [2025-09-24 15:12:53.932] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:12:53.932] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:12:53.932] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:12:53.932] ubi2:textures is mounted. [2025-09-24 15:12:53.932] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:12:53.932] ubi1:animations is mounted. [2025-09-24 15:12:53.932] ubi0:dml_code is mounted. [2025-09-24 15:12:53.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:12:53.948] data.LB_FadeInType0=100 [2025-09-24 15:12:53.969] data.CHLH_FadeInType0=0 [2025-09-24 15:12:53.969] data.WU_FadeInDelay=0 [2025-09-24 15:12:53.969] max_time_out=0 [2025-09-24 15:12:53.969] No splash screen [2025-09-24 15:12:53.969] stop dss Done [2025-09-24 15:12:53.985] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:12:53.985] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:12:54.040] /dev/mem opened. [2025-09-24 15:12:54.040] Memory mapped at address 0xffffb8dcb000. [2025-09-24 15:12:54.040] Read at address 0x00600018 (0xffffb8dcb018): 0x00000000 [2025-09-24 15:12:54.040] Write at address 0x00600018 (0xffffb8dcb018): 0x00400040, readback 0x00400040 [2025-09-24 15:12:54.264] Loaded PowerVR consumer services. [2025-09-24 15:12:54.326] Waiting data available... [2025-09-24 15:12:54.326] 512+0 records in [2025-09-24 15:12:54.326] 512+0 records out [2025-09-24 15:12:54.358] Starting syslogd/klogd: done [2025-09-24 15:12:54.374] DML Start [2025-09-24 15:12:54.550] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:12:54.789] DML res1: 0 [2025-09-24 15:12:55.211] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:12:55.211] Read Success [2025-09-24 15:12:55.211] Verifying certificate... [2025-09-24 15:12:55.467] Verified OK [2025-09-24 15:12:55.483] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:12:57.043] Verified OK [2025-09-24 15:12:57.043] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:12:57.662] Verified OK [2025-09-24 15:12:57.662] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:13:00.460] fs.protected_hardlinks = 1 [2025-09-24 15:13:00.460] fs.protected_symlinks = 1 [2025-09-24 15:13:00.476] kernel.modules_disabled = 1 [2025-09-24 15:13:00.668] [2025-09-24 15:13:00.668] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:13:01.833] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:13:09.543] SBL1:1210.0.1.0 [2025-09-24 15:13:09.574] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:13:11.157] SBL2:1210.0.1.0 [2025-09-24 15:13:11.189] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:13:11.302] j-A [2025-09-24 15:13:18.655] The R5 Autosar Classic is running [2025-09-24 15:13:18.676] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:13:18.676] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:13:19.284] INIT: version 2.96 booting [2025-09-24 15:13:19.396] INIT: Entering runlevel: 5 [2025-09-24 15:13:19.540] mtd24 attached [2025-09-24 15:13:19.556] mtd28 attached [2025-09-24 15:13:19.572] mtd32 attached [2025-09-24 15:13:19.620] RTNETLINK answers: File exists [2025-09-24 15:13:19.620] ubi1:animations is mounted. [2025-09-24 15:13:19.685] ubi2:dml_code is mounted. [2025-09-24 15:13:19.685] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:13:19.685] ubi0:textures is mounted. [2025-09-24 15:13:19.685] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:13:19.685] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:13:19.685] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:13:19.685] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:13:19.685] data.LB_FadeInType0=100 [2025-09-24 15:13:19.685] data.CHLH_FadeInType0=0 [2025-09-24 15:13:19.685] data.WU_FadeInDelay=0 [2025-09-24 15:13:19.685] max_time_out=0 [2025-09-24 15:13:19.685] No splash screen [2025-09-24 15:13:19.685] stop dss Done [2025-09-24 15:13:19.717] /dev/mem opened. [2025-09-24 15:13:19.764] Memory mapped at address 0xffffb6749000. [2025-09-24 15:13:19.764] Read at address 0x00600018 (0xffffb6749018): 0x00000000 [2025-09-24 15:13:19.764] Write at address 0x00600018 (0xffffb6749018): 0x00400040, readback 0x00400040 [2025-09-24 15:13:19.764] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:13:19.764] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:13:19.877] Loaded PowerVR consumer services. [2025-09-24 15:13:20.020] Waiting data available... [2025-09-24 15:13:20.052] 512+0 records in [2025-09-24 15:13:20.052] 512+0 records out [2025-09-24 15:13:20.069] Starting syslogd/klogd: done [2025-09-24 15:13:20.085] DML Start [2025-09-24 15:13:20.276] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:13:20.532] DML res1: 0 [2025-09-24 15:13:20.924] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:13:20.924] Read Success [2025-09-24 15:13:20.924] Verifying certificate... [2025-09-24 15:13:21.164] Verified OK [2025-09-24 15:13:21.164] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:13:22.794] Verified OK [2025-09-24 15:13:22.794] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:13:23.370] Verified OK [2025-09-24 15:13:23.370] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:13:26.088] fs.protected_hardlinks = 1 [2025-09-24 15:13:26.088] fs.protected_symlinks = 1 [2025-09-24 15:13:26.088] kernel.modules_disabled = 1 [2025-09-24 15:13:26.279] [2025-09-24 15:13:26.279] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:13:27.580] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:13:35.265] SBL1:1210.0.1.0 [2025-09-24 15:13:35.313] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:13:36.881] SBL2:1210.0.1.0 [2025-09-24 15:13:36.929] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:13:37.040] j-A [2025-09-24 15:13:44.379] The R5 Autosar Classic is running [2025-09-24 15:13:44.410] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:13:44.410] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:13:45.018] INIT: version 2.96 booting [2025-09-24 15:13:45.129] INIT: Entering runlevel: 5 [2025-09-24 15:13:45.273] mtd32 attached [2025-09-24 15:13:45.289] mtd28 attached [2025-09-24 15:13:45.305] mtd24 attached [2025-09-24 15:13:45.322] ubi0:dml_code is mounted. [2025-09-24 15:13:45.353] ubi1:animations is mounted. [2025-09-24 15:13:45.353] RTNETLINK answers: File exists [2025-09-24 15:13:45.407] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:13:45.407] ubi2:textures is mounted. [2025-09-24 15:13:45.407] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:13:45.407] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:13:45.407] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:13:45.407] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:13:45.407] data.LB_FadeInType0=100 [2025-09-24 15:13:45.407] data.CHLH_FadeInType0=0 [2025-09-24 15:13:45.407] data.WU_FadeInDelay=0 [2025-09-24 15:13:45.407] max_time_out=0 [2025-09-24 15:13:45.407] No splash screen [2025-09-24 15:13:45.407] stop dss Done [2025-09-24 15:13:45.439] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:13:45.482] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:13:45.482] /dev/mem opened. [2025-09-24 15:13:45.482] Memory mapped at address 0xffffa5ef3000. [2025-09-24 15:13:45.482] Read at address 0x00600018 (0xffffa5ef3018): 0x00000000 [2025-09-24 15:13:45.482] Write at address 0x00600018 (0xffffa5ef3018): 0x00400040, readback 0x00400040 [2025-09-24 15:13:45.738] Loaded PowerVR consumer services. [2025-09-24 15:13:45.770] Waiting data available... [2025-09-24 15:13:45.802] 512+0 records in [2025-09-24 15:13:45.802] 512+0 records out [2025-09-24 15:13:45.833] Starting syslogd/klogd: done [2025-09-24 15:13:45.849] DML Start [2025-09-24 15:13:46.042] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:13:46.314] DML res1: 0 [2025-09-24 15:13:46.662] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:13:46.662] Read Success [2025-09-24 15:13:46.662] Verifying certificate... [2025-09-24 15:13:46.902] Verified OK [2025-09-24 15:13:46.918] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:13:48.516] Verified OK [2025-09-24 15:13:48.516] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:13:49.149] Verified OK [2025-09-24 15:13:49.149] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:13:51.899] fs.protected_hardlinks = 1 [2025-09-24 15:13:51.899] fs.protected_symlinks = 1 [2025-09-24 15:13:51.915] kernel.modules_disabled = 1 [2025-09-24 15:13:52.106] [2025-09-24 15:13:52.106] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:13:53.338] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:14:01.002] SBL1:1210.0.1.0 [2025-09-24 15:14:01.050] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:14:02.617] SBL2:1210.0.1.0 [2025-09-24 15:14:02.665] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:14:02.761] j-A [2025-09-24 15:14:10.116] The R5 Autosar Classic is running [2025-09-24 15:14:10.138] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:14:10.138] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:14:10.745] INIT: version 2.96 booting [2025-09-24 15:14:10.857] INIT: Entering runlevel: 5 [2025-09-24 15:14:11.001] mtd24 attached [2025-09-24 15:14:11.017] mtd28 attached [2025-09-24 15:14:11.033] mtd32 attached [2025-09-24 15:14:11.065] ubi0:textures is mounted. [2025-09-24 15:14:11.081] ubi1:animations is mounted. [2025-09-24 15:14:11.097] ubi2:dml_code is mounted. [2025-09-24 15:14:11.097] RTNETLINK answers: File exists [2025-09-24 15:14:11.146] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:14:11.146] data.LB_FadeInType0=100 [2025-09-24 15:14:11.146] data.CHLH_FadeInType0=0 [2025-09-24 15:14:11.147] data.WU_FadeInDelay=0 [2025-09-24 15:14:11.147] max_time_out=0 [2025-09-24 15:14:11.147] No splash screen [2025-09-24 15:14:11.147] stop dss Done [2025-09-24 15:14:11.147] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:14:11.147] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:14:11.147] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:14:11.147] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:14:11.179] /dev/mem opened. [2025-09-24 15:14:11.179] Memory mapped at address 0xffff92424000. [2025-09-24 15:14:11.205] Read at address 0x00600018 (0xffff92424018): 0x00000000 [2025-09-24 15:14:11.205] Write at address 0x00600018 (0xffff92424018): 0x00400040, readback 0x00400040 [2025-09-24 15:14:11.237] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:14:11.253] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:14:11.349] Loaded PowerVR consumer services. [2025-09-24 15:14:11.476] Waiting data available... [2025-09-24 15:14:11.509] 512+0 records in [2025-09-24 15:14:11.509] 512+0 records out [2025-09-24 15:14:11.557] Starting syslogd/klogd: done [2025-09-24 15:14:11.573] DML Start [2025-09-24 15:14:11.716] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:14:11.909] DML res1: 0 [2025-09-24 15:14:12.414] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:14:12.414] Read Success [2025-09-24 15:14:12.414] Verifying certificate... [2025-09-24 15:14:12.654] Verified OK [2025-09-24 15:14:12.670] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:14:14.362] Verified OK [2025-09-24 15:14:14.362] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:14:14.906] Verified OK [2025-09-24 15:14:14.906] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:14:17.464] fs.protected_hardlinks = 1 [2025-09-24 15:14:17.480] fs.protected_symlinks = 1 [2025-09-24 15:14:17.480] kernel.modules_disabled = 1 [2025-09-24 15:14:17.703] [2025-09-24 15:14:17.703] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:14:19.047] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:14:26.722] SBL1:1210.0.1.0 [2025-09-24 15:14:26.754] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:14:28.337] SBL2:1210.0.1.0 [2025-09-24 15:14:28.369] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:14:28.480] j-A [2025-09-24 15:14:35.855] The R5 Autosar Classic is running [2025-09-24 15:14:35.855] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:14:35.855] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:14:36.463] INIT: version 2.96 booting [2025-09-24 15:14:36.574] INIT: Entering runlevel: 5 [2025-09-24 15:14:36.735] mtd24 attached [2025-09-24 15:14:36.735] mtd28 attached [2025-09-24 15:14:36.751] mtd32 attached [2025-09-24 15:14:36.799] ubi1:animations is mounted. [2025-09-24 15:14:36.865] RTNETLINK answers: File exists [2025-09-24 15:14:36.865] ubi2:dml_code is mounted. [2025-09-24 15:14:36.865] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:14:36.865] ubi0:textures is mounted. [2025-09-24 15:14:36.865] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:14:36.865] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:14:36.865] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:14:36.865] data.LB_FadeInType0=100 [2025-09-24 15:14:36.865] data.CHLH_FadeInType0=0 [2025-09-24 15:14:36.865] data.WU_FadeInDelay=0 [2025-09-24 15:14:36.865] max_time_out=0 [2025-09-24 15:14:36.865] No splash screen [2025-09-24 15:14:36.865] stop dss Done [2025-09-24 15:14:36.865] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:14:36.913] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:14:36.929] /dev/mem opened. [2025-09-24 15:14:36.929] Memory mapped at address 0xffff80a60000. [2025-09-24 15:14:36.961] Read at address 0x00600018 (0xffff80a60018): 0x00000000 [2025-09-24 15:14:36.961] Write at address 0x00600018 (0xffff80a60018): 0x00400040, readback 0x00400040 [2025-09-24 15:14:36.961] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:14:37.025] Loaded PowerVR consumer services. [2025-09-24 15:14:37.200] Waiting data available... [2025-09-24 15:14:37.200] 512+0 records in [2025-09-24 15:14:37.200] 512+0 records out [2025-09-24 15:14:37.232] Starting syslogd/klogd: done [2025-09-24 15:14:37.248] DML Start [2025-09-24 15:14:37.440] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:14:37.648] DML res1: 0 [2025-09-24 15:14:38.126] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:14:38.126] Read Success [2025-09-24 15:14:38.126] Verifying certificate... [2025-09-24 15:14:38.399] Verified OK [2025-09-24 15:14:38.414] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:14:40.139] Verified OK [2025-09-24 15:14:40.139] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:14:40.714] Verified OK [2025-09-24 15:14:40.730] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:14:43.273] fs.protected_hardlinks = 1 [2025-09-24 15:14:43.273] fs.protected_symlinks = 1 [2025-09-24 15:14:43.289] kernel.modules_disabled = 1 [2025-09-24 15:14:43.480] [2025-09-24 15:14:43.480] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:14:44.743] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:14:52.464] SBL1:1210.0.1.0 [2025-09-24 15:14:52.512] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:14:54.079] SBL2:1210.0.1.0 [2025-09-24 15:14:54.128] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:14:54.223] j-A [2025-09-24 15:15:01.579] The R5 Autosar Classic is running [2025-09-24 15:15:01.600] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:15:01.600] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:15:02.207] INIT: version 2.96 booting [2025-09-24 15:15:02.319] INIT: Entering runlevel: 5 [2025-09-24 15:15:02.479] mtd32 attached [2025-09-24 15:15:02.479] mtd28 attached [2025-09-24 15:15:02.495] mtd24 attached [2025-09-24 15:15:02.543] RTNETLINK answers: File exists [2025-09-24 15:15:02.543] ubi0:dml_code is mounted. [2025-09-24 15:15:02.608] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:15:02.608] ubi2:textures is mounted. [2025-09-24 15:15:02.608] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:15:02.608] ubi1:animations is mounted. [2025-09-24 15:15:02.608] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:15:02.608] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:15:02.608] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:15:02.608] data.LB_FadeInType0=100 [2025-09-24 15:15:02.608] data.CHLH_FadeInType0=0 [2025-09-24 15:15:02.608] data.WU_FadeInDelay=0 [2025-09-24 15:15:02.608] max_time_out=0 [2025-09-24 15:15:02.608] No splash screen [2025-09-24 15:15:02.608] stop dss Done [2025-09-24 15:15:02.639] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:15:02.639] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:15:02.680] /dev/mem opened. [2025-09-24 15:15:02.680] Memory mapped at address 0xffff89b13000. [2025-09-24 15:15:02.680] Read at address 0x00600018 (0xffff89b13018): 0x00000000 [2025-09-24 15:15:02.680] Write at address 0x00600018 (0xffff89b13018): 0x00400040, readback 0x00400040 [2025-09-24 15:15:02.856] Loaded PowerVR consumer services. [2025-09-24 15:15:02.968] Waiting data available... [2025-09-24 15:15:02.984] 512+0 records in [2025-09-24 15:15:02.984] 512+0 records out [2025-09-24 15:15:03.016] Starting syslogd/klogd: done [2025-09-24 15:15:03.032] DML Start [2025-09-24 15:15:03.207] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:15:03.400] DML res1: 0 [2025-09-24 15:15:03.921] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:15:03.921] Read Success [2025-09-24 15:15:03.921] Verifying certificate... [2025-09-24 15:15:04.145] Verified OK [2025-09-24 15:15:04.177] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:15:05.723] Verified OK [2025-09-24 15:15:05.723] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:15:06.385] Verified OK [2025-09-24 15:15:06.385] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:15:09.071] fs.protected_hardlinks = 1 [2025-09-24 15:15:09.071] fs.protected_symlinks = 1 [2025-09-24 15:15:09.087] kernel.modules_disabled = 1 [2025-09-24 15:15:09.263] [2025-09-24 15:15:09.263] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:15:10.463] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:15:18.206] SBL1:1210.0.1.0 [2025-09-24 15:15:18.238] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:15:19.821] SBL2:1210.0.1.0 [2025-09-24 15:15:19.853] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:15:19.965] j-A [2025-09-24 15:15:27.339] The R5 Autosar Classic is running [2025-09-24 15:15:27.339] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:15:27.339] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:15:27.946] INIT: version 2.96 booting [2025-09-24 15:15:28.058] INIT: Entering runlevel: 5 [2025-09-24 15:15:28.218] mtd32 attached [2025-09-24 15:15:28.218] mtd24 attached [2025-09-24 15:15:28.234] mtd28 attached [2025-09-24 15:15:28.282] RTNETLINK answers: File exists [2025-09-24 15:15:28.326] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:15:28.326] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:15:28.326] ubi0:dml_code is mounted. [2025-09-24 15:15:28.326] ubi1:textures is mounted. [2025-09-24 15:15:28.326] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:15:28.326] ubi2:animations is mounted. [2025-09-24 15:15:28.326] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:15:28.326] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:15:28.352] data.LB_FadeInType0=100 [2025-09-24 15:15:28.352] data.CHLH_FadeInType0=0 [2025-09-24 15:15:28.352] data.WU_FadeInDelay=0 [2025-09-24 15:15:28.352] max_time_out=0 [2025-09-24 15:15:28.352] No splash screen [2025-09-24 15:15:28.352] stop dss Done [2025-09-24 15:15:28.400] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:15:28.433] /dev/mem opened. [2025-09-24 15:15:28.433] Memory mapped at address 0xffff968b2000. [2025-09-24 15:15:28.433] Read at address 0x00600018 (0xffff968b2018): 0x00000000 [2025-09-24 15:15:28.433] Write at address 0x00600018 (0xffff968b2018): 0x00400040, readback 0x00400040 [2025-09-24 15:15:28.433] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:15:28.545] Loaded PowerVR consumer services. [2025-09-24 15:15:28.688] Waiting data available... [2025-09-24 15:15:28.688] 512+0 records in [2025-09-24 15:15:28.704] 512+0 records out [2025-09-24 15:15:28.752] Starting syslogd/klogd: done [2025-09-24 15:15:28.768] DML Start [2025-09-24 15:15:28.928] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:15:29.136] DML res1: 0 [2025-09-24 15:15:29.648] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:15:29.648] Read Success [2025-09-24 15:15:29.663] Verifying certificate... [2025-09-24 15:15:29.935] Verified OK [2025-09-24 15:15:29.935] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:15:31.604] Verified OK [2025-09-24 15:15:31.604] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:15:32.220] Verified OK [2025-09-24 15:15:32.220] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:15:34.810] fs.protected_hardlinks = 1 [2025-09-24 15:15:34.810] fs.protected_symlinks = 1 [2025-09-24 15:15:34.826] kernel.modules_disabled = 1 [2025-09-24 15:15:35.018] [2025-09-24 15:15:35.018] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:15:36.185] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:15:43.913] SBL1:1210.0.1.0 [2025-09-24 15:15:43.961] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:15:45.528] SBL2:1210.0.1.0 [2025-09-24 15:15:45.576] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:15:45.688] j-A [2025-09-24 15:15:53.028] The R5 Autosar Classic is running [2025-09-24 15:15:53.053] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:15:53.053] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:15:53.660] INIT: version 2.96 booting [2025-09-24 15:15:53.772] INIT: Entering runlevel: 5 [2025-09-24 15:15:53.917] mtd24 attached [2025-09-24 15:15:53.933] mtd28 attached [2025-09-24 15:15:53.965] mtd32 attached [2025-09-24 15:15:53.981] ubi0:textures is mounted. [2025-09-24 15:15:53.981] ubi1:animations is mounted. [2025-09-24 15:15:53.997] RTNETLINK answers: File exists [2025-09-24 15:15:54.050] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:15:54.050] ubi2:dml_code is mounted. [2025-09-24 15:15:54.050] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:15:54.050] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:15:54.050] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:15:54.050] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:15:54.050] data.LB_FadeInType0=100 [2025-09-24 15:15:54.050] data.CHLH_FadeInType0=0 [2025-09-24 15:15:54.050] data.WU_FadeInDelay=0 [2025-09-24 15:15:54.050] max_time_out=0 [2025-09-24 15:15:54.050] No splash screen [2025-09-24 15:15:54.050] stop dss Done [2025-09-24 15:15:54.098] /dev/mem opened. [2025-09-24 15:15:54.098] Memory mapped at address 0xffffac038000. [2025-09-24 15:15:54.130] Read at address 0x00600018 (0xffffac038018): 0x00000000 [2025-09-24 15:15:54.130] Write at address 0x00600018 (0xffffac038018): 0x00400040, readback 0x00400040 [2025-09-24 15:15:54.130] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:15:54.130] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:15:54.243] Loaded PowerVR consumer services. [2025-09-24 15:15:54.403] Waiting data available... [2025-09-24 15:15:54.418] 512+0 records in [2025-09-24 15:15:54.434] 512+0 records out [2025-09-24 15:15:54.466] Starting syslogd/klogd: done [2025-09-24 15:15:54.482] DML Start [2025-09-24 15:15:54.658] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:15:54.882] DML res1: 0 [2025-09-24 15:15:55.287] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:15:55.287] Read Success [2025-09-24 15:15:55.287] Verifying certificate... [2025-09-24 15:15:55.526] Verified OK [2025-09-24 15:15:55.542] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:15:57.123] Verified OK [2025-09-24 15:15:57.123] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:15:57.770] Verified OK [2025-09-24 15:15:57.770] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:16:00.519] fs.protected_hardlinks = 1 [2025-09-24 15:16:00.519] fs.protected_symlinks = 1 [2025-09-24 15:16:00.519] kernel.modules_disabled = 1 [2025-09-24 15:16:00.695] [2025-09-24 15:16:00.695] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:16:01.924] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:16:09.658] SBL1:1210.0.1.0 [2025-09-24 15:16:09.690] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:16:11.272] SBL2:1210.0.1.0 [2025-09-24 15:16:11.304] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:16:11.416] j-A [2025-09-24 15:16:18.790] The R5 Autosar Classic is running [2025-09-24 15:16:18.790] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:16:18.790] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:16:19.398] INIT: version 2.96 booting [2025-09-24 15:16:19.509] INIT: Entering runlevel: 5 [2025-09-24 15:16:19.670] mtd28 attached [2025-09-24 15:16:19.670] mtd24 attached [2025-09-24 15:16:19.686] mtd32 attached [2025-09-24 15:16:19.702] ubi0:animations is mounted. [2025-09-24 15:16:19.733] ubi1:textures is mounted. [2025-09-24 15:16:19.733] RTNETLINK answers: File exists [2025-09-24 15:16:19.795] ubi2:dml_code is mounted. [2025-09-24 15:16:19.795] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:16:19.795] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:16:19.795] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:16:19.795] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:16:19.795] data.LB_FadeInType0=100 [2025-09-24 15:16:19.795] data.CHLH_FadeInType0=0 [2025-09-24 15:16:19.795] data.WU_FadeInDelay=0 [2025-09-24 15:16:19.795] max_time_out=0 [2025-09-24 15:16:19.795] No splash screen [2025-09-24 15:16:19.795] stop dss Done [2025-09-24 15:16:19.795] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:16:19.860] /dev/mem opened. [2025-09-24 15:16:19.860] Memory mapped at address 0xffff98f12000. [2025-09-24 15:16:19.860] Read at address 0x00600018 (0xffff98f12018): 0x00000000 [2025-09-24 15:16:19.860] Write at address 0x00600018 (0xffff98f12018): 0x00400040, readback 0x00400040 [2025-09-24 15:16:19.860] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:16:19.876] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:16:20.144] Waiting data available... [2025-09-24 15:16:20.144] Loaded PowerVR consumer services. [2025-09-24 15:16:20.160] 512+0 records in [2025-09-24 15:16:20.160] 512+0 records out [2025-09-24 15:16:20.192] Starting syslogd/klogd: done [2025-09-24 15:16:20.208] DML Start [2025-09-24 15:16:20.352] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:16:20.544] DML res1: 0 [2025-09-24 15:16:21.013] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:16:21.013] Read Success [2025-09-24 15:16:21.013] Verifying certificate... [2025-09-24 15:16:21.269] Verified OK [2025-09-24 15:16:21.285] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:16:22.883] Verified OK [2025-09-24 15:16:22.883] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:16:23.520] Verified OK [2025-09-24 15:16:23.520] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:16:26.206] fs.protected_hardlinks = 1 [2025-09-24 15:16:26.206] fs.protected_symlinks = 1 [2025-09-24 15:16:26.222] kernel.modules_disabled = 1 [2025-09-24 15:16:26.398] [2025-09-24 15:16:26.398] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:16:27.645] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:16:35.378] SBL1:1210.0.1.0 [2025-09-24 15:16:35.426] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:16:36.994] SBL2:1210.0.1.0 [2025-09-24 15:16:37.041] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:16:37.137] j-A [2025-09-24 15:16:44.492] The R5 Autosar Classic is running [2025-09-24 15:16:44.515] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:16:44.515] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:16:45.122] INIT: version 2.96 booting [2025-09-24 15:16:45.234] INIT: Entering runlevel: 5 [2025-09-24 15:16:45.378] mtd24 attached [2025-09-24 15:16:45.394] mtd28 attached [2025-09-24 15:16:45.410] mtd32 attached [2025-09-24 15:16:45.488] RTNETLINK answers: File exists [2025-09-24 15:16:45.488] ubi0:textures is mounted. [2025-09-24 15:16:45.488] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:16:45.488] ubi1:animations is mounted. [2025-09-24 15:16:45.488] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:16:45.488] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:16:45.488] ubi2:dml_code is mounted. [2025-09-24 15:16:45.488] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:16:45.488] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:16:45.515] data.LB_FadeInType0=100 [2025-09-24 15:16:45.515] data.CHLH_FadeInType0=0 [2025-09-24 15:16:45.515] data.WU_FadeInDelay=0 [2025-09-24 15:16:45.515] max_time_out=0 [2025-09-24 15:16:45.515] No splash screen [2025-09-24 15:16:45.515] stop dss Done [2025-09-24 15:16:45.531] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:16:45.531] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:16:45.563] /dev/mem opened. [2025-09-24 15:16:45.563] Memory mapped at address 0xffffb952d000. [2025-09-24 15:16:45.589] Read at address 0x00600018 (0xffffb952d018): 0x00000000 [2025-09-24 15:16:45.589] Write at address 0x00600018 (0xffffb952d018): 0x00400040, readback 0x00400040 [2025-09-24 15:16:45.668] Loaded PowerVR consumer services. [2025-09-24 15:16:45.861] Waiting data available... [2025-09-24 15:16:45.877] 512+0 records in [2025-09-24 15:16:45.877] 512+0 records out [2025-09-24 15:16:45.892] Starting syslogd/klogd: done [2025-09-24 15:16:45.925] DML Start [2025-09-24 15:16:46.117] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:16:46.357] DML res1: 0 [2025-09-24 15:16:46.750] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:16:46.750] Read Success [2025-09-24 15:16:46.750] Verifying certificate... [2025-09-24 15:16:46.973] Verified OK [2025-09-24 15:16:46.990] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:16:48.764] Verified OK [2025-09-24 15:16:48.780] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:16:49.324] Verified OK [2025-09-24 15:16:49.340] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:16:51.898] fs.protected_hardlinks = 1 [2025-09-24 15:16:51.914] fs.protected_symlinks = 1 [2025-09-24 15:16:51.930] kernel.modules_disabled = 1 [2025-09-24 15:16:52.123] [2025-09-24 15:16:52.123] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:16:53.380] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:17:01.120] SBL1:1210.0.1.0 [2025-09-24 15:17:01.152] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:17:02.735] SBL2:1210.0.1.0 [2025-09-24 15:17:02.766] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:17:02.878] j-A [2025-09-24 15:17:10.253] The R5 Autosar Classic is running [2025-09-24 15:17:10.253] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:17:10.253] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:17:10.861] INIT: version 2.96 booting [2025-09-24 15:17:10.972] INIT: Entering runlevel: 5 [2025-09-24 15:17:11.117] mtd28 attached [2025-09-24 15:17:11.132] mtd32 attached [2025-09-24 15:17:11.148] mtd24 attached [2025-09-24 15:17:11.180] ubi0:animations is mounted. [2025-09-24 15:17:11.196] RTNETLINK answers: File exists [2025-09-24 15:17:11.196] ubi1:dml_code is mounted. [2025-09-24 15:17:11.255] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:17:11.255] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:17:11.255] ubi2:textures is mounted. [2025-09-24 15:17:11.255] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:17:11.255] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:17:11.255] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:17:11.255] data.LB_FadeInType0=100 [2025-09-24 15:17:11.255] data.CHLH_FadeInType0=0 [2025-09-24 15:17:11.255] data.WU_FadeInDelay=0 [2025-09-24 15:17:11.255] max_time_out=0 [2025-09-24 15:17:11.255] No splash screen [2025-09-24 15:17:11.255] stop dss Done [2025-09-24 15:17:11.298] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:17:11.298] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:17:11.331] /dev/mem opened. [2025-09-24 15:17:11.331] Memory mapped at address 0xffffaaee6000. [2025-09-24 15:17:11.331] Read at address 0x00600018 (0xffffaaee6018): 0x00000000 [2025-09-24 15:17:11.331] Write at address 0x00600018 (0xffffaaee6018): 0x00400040, readback 0x00400040 [2025-09-24 15:17:11.476] Loaded PowerVR consumer services. [2025-09-24 15:17:11.604] Waiting data available... [2025-09-24 15:17:11.619] 512+0 records in [2025-09-24 15:17:11.619] 512+0 records out [2025-09-24 15:17:11.651] Starting syslogd/klogd: done [2025-09-24 15:17:11.667] DML Start [2025-09-24 15:17:11.843] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:17:12.051] DML res1: 0 [2025-09-24 15:17:12.531] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:17:12.552] Read Success [2025-09-24 15:17:12.552] Verifying certificate... [2025-09-24 15:17:12.808] Verified OK [2025-09-24 15:17:12.824] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:17:14.509] Verified OK [2025-09-24 15:17:14.509] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:17:15.086] Verified OK [2025-09-24 15:17:15.086] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:17:17.676] fs.protected_hardlinks = 1 [2025-09-24 15:17:17.692] fs.protected_symlinks = 1 [2025-09-24 15:17:17.692] kernel.modules_disabled = 1 [2025-09-24 15:17:17.884] [2025-09-24 15:17:17.884] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:17:19.110] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:17:26.842] SBL1:1210.0.1.0 [2025-09-24 15:17:26.890] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:17:28.457] SBL2:1210.0.1.0 [2025-09-24 15:17:28.505] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 15:17:28.617] j-A [2025-09-24 15:17:35.955] The R5 Autosar Classic is running [2025-09-24 15:17:35.986] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:17:35.986] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:17:36.595] INIT: version 2.96 booting [2025-09-24 15:17:36.707] INIT: Entering runlevel: 5 [2025-09-24 15:17:36.850] mtd24 attached [2025-09-24 15:17:36.866] mtd28 attached [2025-09-24 15:17:36.882] mtd32 attached [2025-09-24 15:17:36.914] ubi0:textures is mounted. [2025-09-24 15:17:36.930] ubi1:animations is mounted. [2025-09-24 15:17:36.930] RTNETLINK answers: File exists [2025-09-24 15:17:36.963] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:17:36.963] ubi2:dml_code is mounted. [2025-09-24 15:17:36.963] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:17:36.963] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:17:36.963] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:17:36.963] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:17:36.989] data.LB_FadeInType0=100 [2025-09-24 15:17:36.989] data.CHLH_FadeInType0=0 [2025-09-24 15:17:36.989] data.WU_FadeInDelay=0 [2025-09-24 15:17:36.989] max_time_out=0 [2025-09-24 15:17:36.989] No splash screen [2025-09-24 15:17:36.989] stop dss Done [2025-09-24 15:17:37.037] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:17:37.074] /dev/mem opened. [2025-09-24 15:17:37.074] Memory mapped at address 0xffffb0311000. [2025-09-24 15:17:37.074] Read at address 0x00600018 (0xffffb0311018): 0x00000000 [2025-09-24 15:17:37.074] Write at address 0x00600018 (0xffffb0311018): 0x00400040, readback 0x00400040 [2025-09-24 15:17:37.074] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:17:37.186] Loaded PowerVR consumer services. [2025-09-24 15:17:37.341] Waiting data available... [2025-09-24 15:17:37.341] 512+0 records in [2025-09-24 15:17:37.341] 512+0 records out [2025-09-24 15:17:37.373] Starting syslogd/klogd: done [2025-09-24 15:17:37.389] DML Start [2025-09-24 15:17:37.613] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:17:37.853] DML res1: 0 [2025-09-24 15:17:38.220] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:17:38.241] Read Success [2025-09-24 15:17:38.241] Verifying certificate... [2025-09-24 15:17:38.513] Verified OK [2025-09-24 15:17:38.529] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:17:40.304] Verified OK [2025-09-24 15:17:40.304] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:17:40.796] Verified OK [2025-09-24 15:17:40.796] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:17:43.147] fs.protected_hardlinks = 1 [2025-09-24 15:17:43.163] fs.protected_symlinks = 1 [2025-09-24 15:17:43.179] kernel.modules_disabled = 1 [2025-09-24 15:17:43.371] [2025-09-24 15:17:43.371] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:17:44.902] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:17:52.600] SBL1:1210.0.1.0 [2025-09-24 15:17:52.632] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:17:54.215] SBL2:1210.0.1.0 [2025-09-24 15:17:54.263] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:17:54.359] j-A [2025-09-24 15:18:01.713] The R5 Autosar Classic is running [2025-09-24 15:18:01.735] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:18:01.735] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:18:02.342] INIT: version 2.96 booting [2025-09-24 15:18:02.455] INIT: Entering runlevel: 5 [2025-09-24 15:18:02.599] mtd24 attached [2025-09-24 15:18:02.614] mtd32 attached [2025-09-24 15:18:02.630] mtd28 attached [2025-09-24 15:18:02.662] ubi0:textures is mounted. [2025-09-24 15:18:02.678] RTNETLINK answers: File exists [2025-09-24 15:18:02.734] ubi2:animations is mounted. [2025-09-24 15:18:02.734] ubi1:dml_code is mounted. [2025-09-24 15:18:02.734] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:18:02.734] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:18:02.734] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:18:02.735] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:18:02.735] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:18:02.735] data.LB_FadeInType0=100 [2025-09-24 15:18:02.735] data.CHLH_FadeInType0=0 [2025-09-24 15:18:02.735] data.WU_FadeInDelay=0 [2025-09-24 15:18:02.735] max_time_out=0 [2025-09-24 15:18:02.735] No splash screen [2025-09-24 15:18:02.735] stop dss Done [2025-09-24 15:18:02.809] /dev/mem opened. [2025-09-24 15:18:02.809] Memory mapped at address 0xffff863d0000. [2025-09-24 15:18:02.809] Read at address 0x00600018 (0xffff863d0018): 0x00000000 [2025-09-24 15:18:02.809] Write at address 0x00600018 (0xffff863d0018): 0x00400040, readback 0x00400040 [2025-09-24 15:18:02.809] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:18:02.809] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:18:03.002] Loaded PowerVR consumer services. [2025-09-24 15:18:03.097] Waiting data available... [2025-09-24 15:18:03.129] 512+0 records in [2025-09-24 15:18:03.129] 512+0 records out [2025-09-24 15:18:03.161] Starting syslogd/klogd: done [2025-09-24 15:18:03.177] DML Start [2025-09-24 15:18:03.337] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:18:03.577] DML res1: 0 [2025-09-24 15:18:04.040] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:18:04.040] Read Success [2025-09-24 15:18:04.040] Verifying certificate... [2025-09-24 15:18:04.264] Verified OK [2025-09-24 15:18:04.280] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:18:05.846] Verified OK [2025-09-24 15:18:05.867] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:18:06.504] Verified OK [2025-09-24 15:18:06.504] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:18:09.175] fs.protected_hardlinks = 1 [2025-09-24 15:18:09.175] fs.protected_symlinks = 1 [2025-09-24 15:18:09.191] kernel.modules_disabled = 1 [2025-09-24 15:18:09.382] [2025-09-24 15:18:09.382] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:18:10.593] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:18:18.346] SBL1:1210.0.1.0 [2025-09-24 15:18:18.378] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:18:19.961] SBL2:1210.0.1.0 [2025-09-24 15:18:19.993] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:18:20.105] j-A [2025-09-24 15:18:27.459] The R5 Autosar Classic is running [2025-09-24 15:18:27.459] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:18:27.480] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:18:28.088] INIT: version 2.96 booting [2025-09-24 15:18:28.199] INIT: Entering runlevel: 5 [2025-09-24 15:18:28.359] mtd32 attached [2025-09-24 15:18:28.375] mtd28 attached [2025-09-24 15:18:28.375] mtd24 attached [2025-09-24 15:18:28.423] RTNETLINK answers: File exists [2025-09-24 15:18:28.466] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:18:28.466] ubi0:dml_code is mounted. [2025-09-24 15:18:28.466] ubi1:animations is mounted. [2025-09-24 15:18:28.466] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:18:28.466] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:18:28.466] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:18:28.466] ubi2:textures is mounted. [2025-09-24 15:18:28.466] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:18:28.493] data.LB_FadeInType0=100 [2025-09-24 15:18:28.493] data.CHLH_FadeInType0=0 [2025-09-24 15:18:28.493] data.WU_FadeInDelay=0 [2025-09-24 15:18:28.493] max_time_out=0 [2025-09-24 15:18:28.493] No splash screen [2025-09-24 15:18:28.493] stop dss Done [2025-09-24 15:18:28.523] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:18:28.523] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:18:28.576] /dev/mem opened. [2025-09-24 15:18:28.576] Memory mapped at address 0xffff99721000. [2025-09-24 15:18:28.576] Read at address 0x00600018 (0xffff99721018): 0x00000000 [2025-09-24 15:18:28.576] Write at address 0x00600018 (0xffff99721018): 0x00400040, readback 0x00400040 [2025-09-24 15:18:28.704] Loaded PowerVR consumer services. [2025-09-24 15:18:28.847] Waiting data available... [2025-09-24 15:18:28.847] 512+0 records in [2025-09-24 15:18:28.847] 512+0 records out [2025-09-24 15:18:28.879] Starting syslogd/klogd: done [2025-09-24 15:18:28.895] DML Start [2025-09-24 15:18:29.086] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:18:29.343] DML res1: 0 [2025-09-24 15:18:29.726] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:18:29.726] Read Success [2025-09-24 15:18:29.726] Verifying certificate... [2025-09-24 15:18:29.949] Verified OK [2025-09-24 15:18:29.965] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:18:31.580] Verified OK [2025-09-24 15:18:31.580] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:18:32.146] Verified OK [2025-09-24 15:18:32.146] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:18:35.023] fs.protected_hardlinks = 1 [2025-09-24 15:18:35.023] fs.protected_symlinks = 1 [2025-09-24 15:18:35.023] kernel.modules_disabled = 1 [2025-09-24 15:18:35.199] [2025-09-24 15:18:35.199] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:18:36.383] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:18:44.084] SBL1:1210.0.1.0 [2025-09-24 15:18:44.116] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:18:45.700] SBL2:1210.0.1.0 [2025-09-24 15:18:45.731] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:18:45.843] j-A [2025-09-24 15:18:53.198] The R5 Autosar Classic is running [2025-09-24 15:18:53.198] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:18:53.219] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:18:53.826] INIT: version 2.96 booting [2025-09-24 15:18:53.938] INIT: Entering runlevel: 5 [2025-09-24 15:18:54.098] mtd24 attached [2025-09-24 15:18:54.098] mtd32 attached [2025-09-24 15:18:54.114] mtd28 attached [2025-09-24 15:18:54.146] ubi0:textures is mounted. [2025-09-24 15:18:54.162] RTNETLINK answers: File exists [2025-09-24 15:18:54.219] ubi1:dml_code is mounted. [2025-09-24 15:18:54.219] ubi2:animations is mounted. [2025-09-24 15:18:54.219] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:18:54.219] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:18:54.219] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:18:54.219] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:18:54.219] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:18:54.219] data.LB_FadeInType0=100 [2025-09-24 15:18:54.219] data.CHLH_FadeInType0=0 [2025-09-24 15:18:54.219] data.WU_FadeInDelay=0 [2025-09-24 15:18:54.219] max_time_out=0 [2025-09-24 15:18:54.219] No splash screen [2025-09-24 15:18:54.219] stop dss Done [2025-09-24 15:18:54.251] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:18:54.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:18:54.292] /dev/mem opened. [2025-09-24 15:18:54.292] Memory mapped at address 0xffffaa532000. [2025-09-24 15:18:54.292] Read at address 0x00600018 (0xffffaa532018): 0x00000000 [2025-09-24 15:18:54.292] Write at address 0x00600018 (0xffffaa532018): 0x00400040, readback 0x00400040 [2025-09-24 15:18:54.452] Loaded PowerVR consumer services. [2025-09-24 15:18:54.563] Waiting data available... [2025-09-24 15:18:54.579] 512+0 records in [2025-09-24 15:18:54.595] 512+0 records out [2025-09-24 15:18:54.643] Starting syslogd/klogd: done [2025-09-24 15:18:54.659] DML Start [2025-09-24 15:18:54.820] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:18:55.027] DML res1: 0 [2025-09-24 15:18:55.523] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:18:55.539] Read Success [2025-09-24 15:18:55.539] Verifying certificate... [2025-09-24 15:18:55.779] Verified OK [2025-09-24 15:18:55.795] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:18:57.661] Verified OK [2025-09-24 15:18:57.661] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:18:58.137] Verified OK [2025-09-24 15:18:58.137] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:19:00.519] fs.protected_hardlinks = 1 [2025-09-24 15:19:00.519] fs.protected_symlinks = 1 [2025-09-24 15:19:00.535] kernel.modules_disabled = 1 [2025-09-24 15:19:00.743] [2025-09-24 15:19:00.743] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:19:02.103] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:19:09.828] SBL1:1210.0.1.0 [2025-09-24 15:19:09.860] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:19:11.443] SBL2:1210.0.1.0 [2025-09-24 15:19:11.475] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:19:11.587] j-A [2025-09-24 15:19:18.960] The R5 Autosar Classic is running [2025-09-24 15:19:18.960] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:19:18.960] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:19:19.568] INIT: version 2.96 booting [2025-09-24 15:19:19.680] INIT: Entering runlevel: 5 [2025-09-24 15:19:19.840] mtd28 attached [2025-09-24 15:19:19.856] mtd32 attached [2025-09-24 15:19:19.856] mtd24 attached [2025-09-24 15:19:19.904] ubi0:animations is mounted. [2025-09-24 15:19:19.971] RTNETLINK answers: File exists [2025-09-24 15:19:19.971] ubi2:textures is mounted. [2025-09-24 15:19:19.971] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:19:19.971] ubi1:dml_code is mounted. [2025-09-24 15:19:19.971] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:19:19.971] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:19:19.971] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:19:19.971] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:19:19.971] data.LB_FadeInType0=100 [2025-09-24 15:19:19.971] data.CHLH_FadeInType0=0 [2025-09-24 15:19:19.971] data.WU_FadeInDelay=0 [2025-09-24 15:19:19.971] max_time_out=0 [2025-09-24 15:19:19.971] No splash screen [2025-09-24 15:19:19.971] stop dss Done [2025-09-24 15:19:20.061] /dev/mem opened. [2025-09-24 15:19:20.061] Memory mapped at address 0xffff979b7000. [2025-09-24 15:19:20.061] Read at address 0x00600018 (0xffff979b7018): 0x00000000 [2025-09-24 15:19:20.061] Write at address 0x00600018 (0xffff979b7018): 0x00400040, readback 0x00400040 [2025-09-24 15:19:20.061] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:19:20.061] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:19:20.205] Loaded PowerVR consumer services. [2025-09-24 15:19:20.333] Waiting data available... [2025-09-24 15:19:20.349] 512+0 records in [2025-09-24 15:19:20.349] 512+0 records out [2025-09-24 15:19:20.397] Starting syslogd/klogd: done [2025-09-24 15:19:20.397] DML Start [2025-09-24 15:19:20.556] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:19:20.748] DML res1: 0 [2025-09-24 15:19:21.292] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:19:21.316] Read Success [2025-09-24 15:19:21.316] Verifying certificate... [2025-09-24 15:19:21.572] Verified OK [2025-09-24 15:19:21.588] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:19:23.260] Verified OK [2025-09-24 15:19:23.260] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:19:23.851] Verified OK [2025-09-24 15:19:23.851] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:19:26.361] fs.protected_hardlinks = 1 [2025-09-24 15:19:26.361] fs.protected_symlinks = 1 [2025-09-24 15:19:26.378] kernel.modules_disabled = 1 [2025-09-24 15:19:26.569] [2025-09-24 15:19:26.569] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:19:27.801] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:19:35.584] SBL1:1210.0.1.0 [2025-09-24 15:19:35.616] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:19:37.199] SBL2:1210.0.1.0 [2025-09-24 15:19:37.247] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:19:37.343] j-A [2025-09-24 15:19:44.697] The R5 Autosar Classic is running [2025-09-24 15:19:44.720] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:19:44.720] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:19:45.328] INIT: version 2.96 booting [2025-09-24 15:19:45.439] INIT: Entering runlevel: 5 [2025-09-24 15:19:45.599] mtd32 attached [2025-09-24 15:19:45.599] mtd24 attached [2025-09-24 15:19:45.615] mtd28 attached [2025-09-24 15:19:45.663] RTNETLINK answers: File exists [2025-09-24 15:19:45.706] ubi1:textures is mounted. [2025-09-24 15:19:45.706] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:19:45.706] ubi0:dml_code is mounted. [2025-09-24 15:19:45.706] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:19:45.706] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:19:45.706] ubi2:animations is mounted. [2025-09-24 15:19:45.706] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:19:45.706] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:19:45.731] data.LB_FadeInType0=100 [2025-09-24 15:19:45.731] data.CHLH_FadeInType0=0 [2025-09-24 15:19:45.731] data.WU_FadeInDelay=0 [2025-09-24 15:19:45.731] max_time_out=0 [2025-09-24 15:19:45.731] No splash screen [2025-09-24 15:19:45.731] stop dss Done [2025-09-24 15:19:45.813] /dev/mem opened. [2025-09-24 15:19:45.813] Memory mapped at address 0xffffaaf78000. [2025-09-24 15:19:45.813] Read at address 0x00600018 (0xffffaaf78018): 0x00000000 [2025-09-24 15:19:45.813] Write at address 0x00600018 (0xffffaaf78018): 0x00400040, readback 0x00400040 [2025-09-24 15:19:45.813] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:19:45.813] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:19:45.894] Loaded PowerVR consumer services. [2025-09-24 15:19:46.069] Waiting data available... [2025-09-24 15:19:46.101] 512+0 records in [2025-09-24 15:19:46.101] 512+0 records out [2025-09-24 15:19:46.149] Starting syslogd/klogd: done [2025-09-24 15:19:46.165] DML Start [2025-09-24 15:19:46.341] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:19:46.597] DML res1: 0 [2025-09-24 15:19:46.963] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:19:46.963] Read Success [2025-09-24 15:19:46.963] Verifying certificate... [2025-09-24 15:19:47.234] Verified OK [2025-09-24 15:19:47.251] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:19:48.985] Verified OK [2025-09-24 15:19:48.985] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:19:49.582] Verified OK [2025-09-24 15:19:49.582] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:19:52.137] fs.protected_hardlinks = 1 [2025-09-24 15:19:52.137] fs.protected_symlinks = 1 [2025-09-24 15:19:52.137] kernel.modules_disabled = 1 [2025-09-24 15:19:52.312] [2025-09-24 15:19:52.312] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:19:53.665] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:20:01.381] SBL1:1210.0.1.0 [2025-09-24 15:20:01.413] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:20:02.996] SBL2:1210.0.1.0 [2025-09-24 15:20:03.028] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:20:03.140] j-A [2025-09-24 15:20:10.514] The R5 Autosar Classic is running [2025-09-24 15:20:10.514] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:20:10.514] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:20:11.121] INIT: version 2.96 booting [2025-09-24 15:20:11.233] INIT: Entering runlevel: 5 [2025-09-24 15:20:11.377] mtd24 attached [2025-09-24 15:20:11.392] mtd32 attached [2025-09-24 15:20:11.408] mtd28 attached [2025-09-24 15:20:11.440] ubi0:textures is mounted. [2025-09-24 15:20:11.456] RTNETLINK answers: File exists [2025-09-24 15:20:11.456] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:20:11.490] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:20:11.490] ubi1:dml_code is mounted. [2025-09-24 15:20:11.490] ubi2:animations is mounted. [2025-09-24 15:20:11.490] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:20:11.490] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:20:11.490] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:20:11.514] data.LB_FadeInType0=100 [2025-09-24 15:20:11.514] data.CHLH_FadeInType0=0 [2025-09-24 15:20:11.514] data.WU_FadeInDelay=0 [2025-09-24 15:20:11.514] max_time_out=0 [2025-09-24 15:20:11.514] No splash screen [2025-09-24 15:20:11.514] stop dss Done [2025-09-24 15:20:11.530] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:20:11.546] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:20:11.579] /dev/mem opened. [2025-09-24 15:20:11.579] Memory mapped at address 0xffff9f073000. [2025-09-24 15:20:11.579] Read at address 0x00600018 (0xffff9f073018): 0x00000000 [2025-09-24 15:20:11.579] Write at address 0x00600018 (0xffff9f073018): 0x00400040, readback 0x00400040 [2025-09-24 15:20:11.675] Loaded PowerVR consumer services. [2025-09-24 15:20:11.851] Waiting data available... [2025-09-24 15:20:11.867] 512+0 records in [2025-09-24 15:20:11.867] 512+0 records out [2025-09-24 15:20:11.883] Starting syslogd/klogd: done [2025-09-24 15:20:11.915] DML Start [2025-09-24 15:20:12.123] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:20:12.315] DML res1: 0 [2025-09-24 15:20:12.747] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:20:12.771] Read Success [2025-09-24 15:20:12.771] Verifying certificate... [2025-09-24 15:20:12.995] Verified OK [2025-09-24 15:20:13.027] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:20:14.766] Verified OK [2025-09-24 15:20:14.766] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:20:15.342] Verified OK [2025-09-24 15:20:15.358] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:20:18.010] fs.protected_hardlinks = 1 [2025-09-24 15:20:18.010] fs.protected_symlinks = 1 [2025-09-24 15:20:18.010] kernel.modules_disabled = 1 [2025-09-24 15:20:18.217] [2025-09-24 15:20:18.217] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:20:19.343] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:20:27.114] SBL1:1210.0.1.0 [2025-09-24 15:20:27.162] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:20:28.729] SBL2:1210.0.1.0 [2025-09-24 15:20:28.777] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:20:28.889] j-A [2025-09-24 15:20:36.228] The R5 Autosar Classic is running [2025-09-24 15:20:36.253] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:20:36.253] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:20:36.877] INIT: version 2.96 booting [2025-09-24 15:20:36.972] INIT: Entering runlevel: 5 [2025-09-24 15:20:37.132] mtd24 attached [2025-09-24 15:20:37.148] mtd28 attached [2025-09-24 15:20:37.148] mtd32 attached [2025-09-24 15:20:37.180] ubi0:textures is mounted. [2025-09-24 15:20:37.196] ubi1:animations is mounted. [2025-09-24 15:20:37.262] RTNETLINK answers: File exists [2025-09-24 15:20:37.262] ubi2:dml_code is mounted. [2025-09-24 15:20:37.262] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:20:37.262] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:20:37.262] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:20:37.262] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:20:37.262] data.LB_FadeInType0=100 [2025-09-24 15:20:37.262] data.CHLH_FadeInType0=0 [2025-09-24 15:20:37.262] data.WU_FadeInDelay=0 [2025-09-24 15:20:37.262] max_time_out=0 [2025-09-24 15:20:37.262] No splash screen [2025-09-24 15:20:37.262] stop dss Done [2025-09-24 15:20:37.262] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:20:37.332] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:20:37.332] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:20:37.332] /dev/mem opened. [2025-09-24 15:20:37.332] Memory mapped at address 0xffff87df8000. [2025-09-24 15:20:37.332] Read at address 0x00600018 (0xffff87df8018): 0x00000000 [2025-09-24 15:20:37.332] Write at address 0x00600018 (0xffff87df8018): 0x00400040, readback 0x00400040 [2025-09-24 15:20:37.492] Loaded PowerVR consumer services. [2025-09-24 15:20:37.588] Waiting data available... [2025-09-24 15:20:37.620] 512+0 records in [2025-09-24 15:20:37.620] 512+0 records out [2025-09-24 15:20:37.636] Starting syslogd/klogd: done [2025-09-24 15:20:37.668] DML Start [2025-09-24 15:20:37.843] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:20:38.051] DML res1: 0 [2025-09-24 15:20:38.508] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:20:38.508] Read Success [2025-09-24 15:20:38.508] Verifying certificate... [2025-09-24 15:20:38.747] Verified OK [2025-09-24 15:20:38.763] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:20:40.419] Verified OK [2025-09-24 15:20:40.419] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:20:41.011] Verified OK [2025-09-24 15:20:41.011] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:20:43.569] fs.protected_hardlinks = 1 [2025-09-24 15:20:43.599] fs.protected_symlinks = 1 [2025-09-24 15:20:43.599] kernel.modules_disabled = 1 [2025-09-24 15:20:43.775] [2025-09-24 15:20:43.775] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:20:45.097] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:20:52.816] SBL1:1210.0.1.0 [2025-09-24 15:20:52.864] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:20:54.446] SBL2:1210.0.1.0 [2025-09-24 15:20:54.478] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:20:54.591] j-A [2025-09-24 15:21:01.963] The R5 Autosar Classic is running [2025-09-24 15:21:01.963] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:21:01.963] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:21:02.570] INIT: version 2.96 booting [2025-09-24 15:21:02.682] INIT: Entering runlevel: 5 [2025-09-24 15:21:02.842] mtd24 attached [2025-09-24 15:21:02.842] mtd28 attached [2025-09-24 15:21:02.859] mtd32 attached [2025-09-24 15:21:02.939] ubi0:textures is mounted. [2025-09-24 15:21:02.939] RTNETLINK answers: File exists [2025-09-24 15:21:02.939] ubi1:animations is mounted. [2025-09-24 15:21:02.939] ubi2:dml_code is mounted. [2025-09-24 15:21:02.939] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:21:02.939] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:21:02.939] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:21:02.939] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:21:02.974] data.LB_FadeInType0=100 [2025-09-24 15:21:02.974] data.CHLH_FadeInType0=0 [2025-09-24 15:21:02.974] data.WU_FadeInDelay=0 [2025-09-24 15:21:02.974] max_time_out=0 [2025-09-24 15:21:02.974] No splash screen [2025-09-24 15:21:02.974] stop dss Done [2025-09-24 15:21:02.974] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:21:03.041] /dev/mem opened. [2025-09-24 15:21:03.041] Memory mapped at address 0xffff97631000. [2025-09-24 15:21:03.041] Read at address 0x00600018 (0xffff97631018): 0x00000000 [2025-09-24 15:21:03.041] Write at address 0x00600018 (0xffff97631018): 0x00400040, readback 0x00400040 [2025-09-24 15:21:03.057] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:21:03.073] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:21:03.153] Loaded PowerVR consumer services. [2025-09-24 15:21:03.329] Waiting data available... [2025-09-24 15:21:03.344] 512+0 records in [2025-09-24 15:21:03.344] 512+0 records out [2025-09-24 15:21:03.377] Starting syslogd/klogd: done [2025-09-24 15:21:03.393] DML Start [2025-09-24 15:21:03.600] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:21:03.793] DML res1: 0 [2025-09-24 15:21:04.224] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:21:04.245] Read Success [2025-09-24 15:21:04.245] Verifying certificate... [2025-09-24 15:21:04.485] Verified OK [2025-09-24 15:21:04.501] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:21:06.064] Verified OK [2025-09-24 15:21:06.064] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:21:06.681] Verified OK [2025-09-24 15:21:06.681] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:21:09.447] fs.protected_hardlinks = 1 [2025-09-24 15:21:09.463] fs.protected_symlinks = 1 [2025-09-24 15:21:09.463] kernel.modules_disabled = 1 [2025-09-24 15:21:09.671] [2025-09-24 15:21:09.671] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:21:10.862] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:21:18.571] SBL1:1210.0.1.0 [2025-09-24 15:21:18.603] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:21:20.187] SBL2:1210.0.1.0 [2025-09-24 15:21:20.219] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:21:20.330] j-A [2025-09-24 15:21:27.705] The R5 Autosar Classic is running [2025-09-24 15:21:27.705] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:21:27.705] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:21:28.312] INIT: version 2.96 booting [2025-09-24 15:21:28.425] INIT: Entering runlevel: 5 [2025-09-24 15:21:28.568] mtd28 attached [2025-09-24 15:21:28.584] mtd24 attached [2025-09-24 15:21:28.601] mtd32 attached [2025-09-24 15:21:28.632] ubi0:animations is mounted. [2025-09-24 15:21:28.649] RTNETLINK answers: File exists [2025-09-24 15:21:28.707] ubi2:dml_code is mounted. [2025-09-24 15:21:28.707] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:21:28.707] ubi1:textures is mounted. [2025-09-24 15:21:28.707] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:21:28.707] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:21:28.707] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:21:28.707] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:21:28.707] data.LB_FadeInType0=100 [2025-09-24 15:21:28.707] data.CHLH_FadeInType0=0 [2025-09-24 15:21:28.707] data.WU_FadeInDelay=0 [2025-09-24 15:21:28.707] max_time_out=0 [2025-09-24 15:21:28.707] No splash screen [2025-09-24 15:21:28.707] stop dss Done [2025-09-24 15:21:28.755] /dev/mem opened. [2025-09-24 15:21:28.755] Memory mapped at address 0xffff88776000. [2025-09-24 15:21:28.796] Read at address 0x00600018 (0xffff88776018): 0x00000000 [2025-09-24 15:21:28.796] Write at address 0x00600018 (0xffff88776018): 0x00400040, readback 0x00400040 [2025-09-24 15:21:28.796] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:21:28.796] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:21:29.020] Loaded PowerVR consumer services. [2025-09-24 15:21:29.036] Waiting data available... [2025-09-24 15:21:29.068] 512+0 records in [2025-09-24 15:21:29.068] 512+0 records out [2025-09-24 15:21:29.116] Starting syslogd/klogd: done [2025-09-24 15:21:29.132] DML Start [2025-09-24 15:21:29.308] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:21:29.532] DML res1: 0 [2025-09-24 15:21:30.010] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:21:30.010] Read Success [2025-09-24 15:21:30.010] Verifying certificate... [2025-09-24 15:21:30.250] Verified OK [2025-09-24 15:21:30.266] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:21:31.989] Verified OK [2025-09-24 15:21:31.989] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:21:32.565] Verified OK [2025-09-24 15:21:32.565] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:21:35.139] fs.protected_hardlinks = 1 [2025-09-24 15:21:35.139] fs.protected_symlinks = 1 [2025-09-24 15:21:35.154] kernel.modules_disabled = 1 [2025-09-24 15:21:35.346] [2025-09-24 15:21:35.346] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:21:36.536] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:21:44.268] SBL1:1210.0.1.0 [2025-09-24 15:21:44.316] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:21:45.883] SBL2:1210.0.1.0 [2025-09-24 15:21:45.931] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:21:46.027] j-A [2025-09-24 15:21:53.383] The R5 Autosar Classic is running [2025-09-24 15:21:53.407] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:21:53.407] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:21:54.015] INIT: version 2.96 booting [2025-09-24 15:21:54.126] INIT: Entering runlevel: 5 [2025-09-24 15:21:54.286] mtd28 attached [2025-09-24 15:21:54.286] mtd32 attached [2025-09-24 15:21:54.302] mtd24 attached [2025-09-24 15:21:54.350] RTNETLINK answers: File exists [2025-09-24 15:21:54.350] ubi0:animations is mounted. [2025-09-24 15:21:54.387] ubi1:dml_code is mounted. [2025-09-24 15:21:54.387] ubi2:textures is mounted. [2025-09-24 15:21:54.387] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:21:54.387] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:21:54.387] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:21:54.387] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:21:54.419] data.LB_FadeInType0=100 [2025-09-24 15:21:54.419] data.CHLH_FadeInType0=0 [2025-09-24 15:21:54.419] data.WU_FadeInDelay=0 [2025-09-24 15:21:54.419] max_time_out=0 [2025-09-24 15:21:54.419] No splash screen [2025-09-24 15:21:54.419] stop dss Done [2025-09-24 15:21:54.419] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:21:54.467] /dev/mem opened. [2025-09-24 15:21:54.467] Memory mapped at address 0xffff9dcb6000. [2025-09-24 15:21:54.499] Read at address 0x00600018 (0xffff9dcb6018): 0x00000000 [2025-09-24 15:21:54.499] Write at address 0x00600018 (0xffff9dcb6018): 0x00400040, readback 0x00400040 [2025-09-24 15:21:54.499] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:21:54.499] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:21:54.769] Waiting data available... [2025-09-24 15:21:54.769] Loaded PowerVR consumer services. [2025-09-24 15:21:54.785] 512+0 records in [2025-09-24 15:21:54.785] 512+0 records out [2025-09-24 15:21:54.817] Starting syslogd/klogd: done [2025-09-24 15:21:54.833] DML Start [2025-09-24 15:21:54.993] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:21:55.169] DML res1: 0 [2025-09-24 15:21:55.745] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:21:55.767] Read Success [2025-09-24 15:21:55.767] Verifying certificate... [2025-09-24 15:21:56.022] Verified OK [2025-09-24 15:21:56.022] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:21:57.710] Verified OK [2025-09-24 15:21:57.710] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:21:58.297] Verified OK [2025-09-24 15:21:58.297] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:22:00.838] fs.protected_hardlinks = 1 [2025-09-24 15:22:00.838] fs.protected_symlinks = 1 [2025-09-24 15:22:00.854] kernel.modules_disabled = 1 [2025-09-24 15:22:01.047] [2025-09-24 15:22:01.047] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:22:02.276] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:22:09.988] SBL1:1210.0.1.0 [2025-09-24 15:22:10.036] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:22:11.602] SBL2:1210.0.1.0 [2025-09-24 15:22:11.650] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:22:11.762] j-A [2025-09-24 15:22:19.101] The R5 Autosar Classic is running [2025-09-24 15:22:19.132] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:22:19.132] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:22:19.740] INIT: version 2.96 booting [2025-09-24 15:22:19.852] INIT: Entering runlevel: 5 [2025-09-24 15:22:19.996] mtd32 attached [2025-09-24 15:22:20.012] mtd28 attached [2025-09-24 15:22:20.028] mtd24 attached [2025-09-24 15:22:20.107] RTNETLINK answers: File exists [2025-09-24 15:22:20.107] ubi1:animations is mounted. [2025-09-24 15:22:20.107] ubi0:dml_code is mounted. [2025-09-24 15:22:20.107] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:22:20.107] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:22:20.107] ubi2:textures is mounted. [2025-09-24 15:22:20.107] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:22:20.107] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:22:20.107] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:22:20.137] data.LB_FadeInType0=100 [2025-09-24 15:22:20.137] data.CHLH_FadeInType0=0 [2025-09-24 15:22:20.137] data.WU_FadeInDelay=0 [2025-09-24 15:22:20.137] max_time_out=0 [2025-09-24 15:22:20.137] No splash screen [2025-09-24 15:22:20.137] stop dss Done [2025-09-24 15:22:20.170] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:22:20.186] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:22:20.221] /dev/mem opened. [2025-09-24 15:22:20.221] Memory mapped at address 0xffff86be4000. [2025-09-24 15:22:20.221] Read at address 0x00600018 (0xffff86be4018): 0x00000000 [2025-09-24 15:22:20.221] Write at address 0x00600018 (0xffff86be4018): 0x00400040, readback 0x00400040 [2025-09-24 15:22:20.316] Loaded PowerVR consumer services. [2025-09-24 15:22:20.477] Waiting data available... [2025-09-24 15:22:20.493] 512+0 records in [2025-09-24 15:22:20.493] 512+0 records out [2025-09-24 15:22:20.541] Starting syslogd/klogd: done [2025-09-24 15:22:20.557] DML Start [2025-09-24 15:22:20.716] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:22:20.892] DML res1: 0 [2025-09-24 15:22:21.497] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:22:21.497] Read Success [2025-09-24 15:22:21.497] Verifying certificate... [2025-09-24 15:22:21.720] Verified OK [2025-09-24 15:22:21.720] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:22:23.384] Verified OK [2025-09-24 15:22:23.384] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:22:23.896] Verified OK [2025-09-24 15:22:23.912] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:22:26.421] fs.protected_hardlinks = 1 [2025-09-24 15:22:26.438] fs.protected_symlinks = 1 [2025-09-24 15:22:26.438] kernel.modules_disabled = 1 [2025-09-24 15:22:26.645] [2025-09-24 15:22:26.645] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:22:27.969] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:22:35.722] SBL1:1210.0.1.0 [2025-09-24 15:22:35.770] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:22:37.337] SBL2:1210.0.1.0 [2025-09-24 15:22:37.384] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:22:37.480] j-A [2025-09-24 15:22:44.836] The R5 Autosar Classic is running [2025-09-24 15:22:44.860] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:22:44.860] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:22:45.468] INIT: version 2.96 booting [2025-09-24 15:22:45.580] INIT: Entering runlevel: 5 [2025-09-24 15:22:45.739] mtd24 attached [2025-09-24 15:22:45.739] mtd32 attached [2025-09-24 15:22:45.755] mtd28 attached [2025-09-24 15:22:45.804] ubi0:textures is mounted. [2025-09-24 15:22:45.871] RTNETLINK answers: File exists [2025-09-24 15:22:45.871] ubi2:animations is mounted. [2025-09-24 15:22:45.871] ubi1:dml_code is mounted. [2025-09-24 15:22:45.871] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:22:45.871] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:22:45.871] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:22:45.871] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:22:45.871] data.LB_FadeInType0=100 [2025-09-24 15:22:45.871] data.CHLH_FadeInType0=0 [2025-09-24 15:22:45.871] data.WU_FadeInDelay=0 [2025-09-24 15:22:45.871] max_time_out=0 [2025-09-24 15:22:45.871] No splash screen [2025-09-24 15:22:45.871] stop dss Done [2025-09-24 15:22:45.871] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:22:45.943] /dev/mem opened. [2025-09-24 15:22:45.943] Memory mapped at address 0xffffbb4f6000. [2025-09-24 15:22:45.943] Read at address 0x00600018 (0xffffbb4f6018): 0x00000000 [2025-09-24 15:22:45.943] Write at address 0x00600018 (0xffffbb4f6018): 0x00400040, readback 0x00400040 [2025-09-24 15:22:45.959] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:22:45.975] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:22:46.183] Loaded PowerVR consumer services. [2025-09-24 15:22:46.215] Waiting data available... [2025-09-24 15:22:46.247] 512+0 records in [2025-09-24 15:22:46.247] 512+0 records out [2025-09-24 15:22:46.295] Starting syslogd/klogd: done [2025-09-24 15:22:46.295] DML Start [2025-09-24 15:22:46.439] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:22:46.663] DML res1: 0 [2025-09-24 15:22:47.166] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:22:47.166] Read Success [2025-09-24 15:22:47.166] Verifying certificate... [2025-09-24 15:22:47.454] Verified OK [2025-09-24 15:22:47.485] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:22:49.076] Verified OK [2025-09-24 15:22:49.076] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:22:49.635] Verified OK [2025-09-24 15:22:49.635] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:22:52.162] fs.protected_hardlinks = 1 [2025-09-24 15:22:52.162] fs.protected_symlinks = 1 [2025-09-24 15:22:52.178] kernel.modules_disabled = 1 [2025-09-24 15:22:52.369] [2025-09-24 15:22:52.369] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:22:53.718] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:23:01.452] SBL1:1210.0.1.0 [2025-09-24 15:23:01.500] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:23:03.067] SBL2:1210.0.1.0 [2025-09-24 15:23:03.115] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:23:03.210] j-A [2025-09-24 15:23:10.565] The R5 Autosar Classic is running [2025-09-24 15:23:10.587] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:23:10.587] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:23:11.195] INIT: version 2.96 booting [2025-09-24 15:23:11.306] INIT: Entering runlevel: 5 [2025-09-24 15:23:11.467] mtd24 attached [2025-09-24 15:23:11.467] mtd28 attached [2025-09-24 15:23:11.514] mtd32 attached [2025-09-24 15:23:11.575] ubi0:textures is mounted. [2025-09-24 15:23:11.575] ubi1:animations is mounted. [2025-09-24 15:23:11.575] RTNETLINK answers: File exists [2025-09-24 15:23:11.575] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:23:11.575] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:23:11.575] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:23:11.575] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:23:11.575] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:23:11.575] ubi2:dml_code is mounted. [2025-09-24 15:23:11.591] data.LB_FadeInType0=100 [2025-09-24 15:23:11.635] data.CHLH_FadeInType0=0 [2025-09-24 15:23:11.635] data.WU_FadeInDelay=0 [2025-09-24 15:23:11.635] max_time_out=0 [2025-09-24 15:23:11.635] No splash screen [2025-09-24 15:23:11.635] stop dss Done [2025-09-24 15:23:11.635] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:23:11.635] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:23:11.684] /dev/mem opened. [2025-09-24 15:23:11.684] Memory mapped at address 0xffffaf01c000. [2025-09-24 15:23:11.684] Read at address 0x00600018 (0xffffaf01c018): 0x00000000 [2025-09-24 15:23:11.684] Write at address 0x00600018 (0xffffaf01c018): 0x00400040, readback 0x00400040 [2025-09-24 15:23:11.748] Loaded PowerVR consumer services. [2025-09-24 15:23:11.952] Waiting data available... [2025-09-24 15:23:11.952] 512+0 records in [2025-09-24 15:23:11.952] 512+0 records out [2025-09-24 15:23:11.984] Starting syslogd/klogd: done [2025-09-24 15:23:12.016] DML Start [2025-09-24 15:23:12.176] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:23:12.383] DML res1: 0 [2025-09-24 15:23:12.878] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:23:12.878] Read Success [2025-09-24 15:23:12.878] Verifying certificate... [2025-09-24 15:23:13.150] Verified OK [2025-09-24 15:23:13.150] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:23:14.917] Verified OK [2025-09-24 15:23:14.917] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:23:15.519] Verified OK [2025-09-24 15:23:15.519] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:23:18.109] fs.protected_hardlinks = 1 [2025-09-24 15:23:18.126] fs.protected_symlinks = 1 [2025-09-24 15:23:18.142] kernel.modules_disabled = 1 [2025-09-24 15:23:18.333] [2025-09-24 15:23:18.333] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:23:19.452] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:23:27.192] SBL1:1210.0.1.0 [2025-09-24 15:23:27.224] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:23:28.807] SBL2:1210.0.1.0 [2025-09-24 15:23:28.839] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:23:28.951] j-A [2025-09-24 15:23:36.305] The R5 Autosar Classic is running [2025-09-24 15:23:36.305] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:23:36.326] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:23:36.934] INIT: version 2.96 booting [2025-09-24 15:23:37.045] INIT: Entering runlevel: 5 [2025-09-24 15:23:37.190] mtd24 attached [2025-09-24 15:23:37.206] mtd28 attached [2025-09-24 15:23:37.222] mtd32 attached [2025-09-24 15:23:37.303] RTNETLINK answers: File exists [2025-09-24 15:23:37.303] ubi0:textures is mounted. [2025-09-24 15:23:37.303] ubi1:animations is mounted. [2025-09-24 15:23:37.303] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:23:37.303] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:23:37.303] ubi2:dml_code is mounted. [2025-09-24 15:23:37.303] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:23:37.303] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:23:37.303] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:23:37.329] data.LB_FadeInType0=100 [2025-09-24 15:23:37.329] data.CHLH_FadeInType0=0 [2025-09-24 15:23:37.329] data.WU_FadeInDelay=0 [2025-09-24 15:23:37.329] max_time_out=0 [2025-09-24 15:23:37.329] No splash screen [2025-09-24 15:23:37.329] stop dss Done [2025-09-24 15:23:37.361] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:23:37.361] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:23:37.377] /dev/mem opened. [2025-09-24 15:23:37.410] Memory mapped at address 0xffffafe0e000. [2025-09-24 15:23:37.410] Read at address 0x00600018 (0xffffafe0e018): 0x00000000 [2025-09-24 15:23:37.410] Write at address 0x00600018 (0xffffafe0e018): 0x00400040, readback 0x00400040 [2025-09-24 15:23:37.633] Loaded PowerVR consumer services. [2025-09-24 15:23:37.650] Waiting data available... [2025-09-24 15:23:37.682] 512+0 records in [2025-09-24 15:23:37.682] 512+0 records out [2025-09-24 15:23:37.730] Starting syslogd/klogd: done [2025-09-24 15:23:37.746] DML Start [2025-09-24 15:23:37.921] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:23:38.162] DML res1: 0 [2025-09-24 15:23:38.606] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:23:38.606] Read Success [2025-09-24 15:23:38.606] Verifying certificate... [2025-09-24 15:23:38.846] Verified OK [2025-09-24 15:23:38.878] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:23:40.579] Verified OK [2025-09-24 15:23:40.579] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:23:41.155] Verified OK [2025-09-24 15:23:41.155] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:23:43.696] fs.protected_hardlinks = 1 [2025-09-24 15:23:43.696] fs.protected_symlinks = 1 [2025-09-24 15:23:43.696] kernel.modules_disabled = 1 [2025-09-24 15:23:43.887] [2025-09-24 15:23:43.887] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:23:45.207] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:23:52.889] SBL1:1210.0.1.0 [2025-09-24 15:23:52.937] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 15:23:54.503] SBL2:1210.0.1.0 [2025-09-24 15:23:54.551] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:23:54.663] j-A [2025-09-24 15:24:02.001] The R5 Autosar Classic is running [2025-09-24 15:24:02.032] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:24:02.032] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:24:02.640] INIT: version 2.96 booting [2025-09-24 15:24:02.752] INIT: Entering runlevel: 5 [2025-09-24 15:24:02.896] mtd28 attached [2025-09-24 15:24:02.912] mtd24 attached [2025-09-24 15:24:02.928] mtd32 attached [2025-09-24 15:24:02.944] ubi0:animations is mounted. [2025-09-24 15:24:02.976] RTNETLINK answers: File exists [2025-09-24 15:24:02.976] ubi1:textures is mounted. [2025-09-24 15:24:03.031] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:24:03.031] ubi2:dml_code is mounted. [2025-09-24 15:24:03.031] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:24:03.031] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:24:03.031] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:24:03.031] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:24:03.031] data.LB_FadeInType0=100 [2025-09-24 15:24:03.031] data.CHLH_FadeInType0=0 [2025-09-24 15:24:03.031] data.WU_FadeInDelay=0 [2025-09-24 15:24:03.031] max_time_out=0 [2025-09-24 15:24:03.031] No splash screen [2025-09-24 15:24:03.031] stop dss Done [2025-09-24 15:24:03.079] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:24:03.113] /dev/mem opened. [2025-09-24 15:24:03.113] Memory mapped at address 0xffffa826e000. [2025-09-24 15:24:03.113] Read at address 0x00600018 (0xffffa826e018): 0x00000000 [2025-09-24 15:24:03.113] Write at address 0x00600018 (0xffffa826e018): 0x00400040, readback 0x00400040 [2025-09-24 15:24:03.113] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:24:03.257] Loaded PowerVR consumer services. [2025-09-24 15:24:03.401] Waiting data available... [2025-09-24 15:24:03.417] 512+0 records in [2025-09-24 15:24:03.417] 512+0 records out [2025-09-24 15:24:03.449] Starting syslogd/klogd: done [2025-09-24 15:24:03.465] DML Start [2025-09-24 15:24:03.641] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:24:03.848] DML res1: 0 [2025-09-24 15:24:04.336] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:24:04.336] Read Success [2025-09-24 15:24:04.336] Verifying certificate... [2025-09-24 15:24:04.576] Verified OK [2025-09-24 15:24:04.591] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:24:06.207] Verified OK [2025-09-24 15:24:06.207] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:24:06.808] Verified OK [2025-09-24 15:24:06.808] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:24:09.495] fs.protected_hardlinks = 1 [2025-09-24 15:24:09.511] fs.protected_symlinks = 1 [2025-09-24 15:24:09.511] kernel.modules_disabled = 1 [2025-09-24 15:24:09.719] [2025-09-24 15:24:09.719] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:24:10.886] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:24:18.617] SBL1:1210.0.1.0 [2025-09-24 15:24:18.665] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:24:20.232] SBL2:1210.0.1.0 [2025-09-24 15:24:20.280] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:24:20.376] j-A [2025-09-24 15:24:27.731] The R5 Autosar Classic is running [2025-09-24 15:24:27.756] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:24:27.756] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:24:28.363] INIT: version 2.96 booting [2025-09-24 15:24:28.475] INIT: Entering runlevel: 5 [2025-09-24 15:24:28.635] mtd28 attached [2025-09-24 15:24:28.651] mtd24 attached [2025-09-24 15:24:28.683] ubi0:animations is mounted. [2025-09-24 15:24:28.683] mtd32 attached [2025-09-24 15:24:28.699] ubi1:textures is mounted. [2025-09-24 15:24:28.699] RTNETLINK answers: File exists [2025-09-24 15:24:28.715] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:24:28.715] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:24:28.744] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:24:28.744] ubi2:dml_code is mounted. [2025-09-24 15:24:28.744] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:24:28.744] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:24:28.768] data.LB_FadeInType0=100 [2025-09-24 15:24:28.768] data.CHLH_FadeInType0=0 [2025-09-24 15:24:28.768] data.WU_FadeInDelay=0 [2025-09-24 15:24:28.768] max_time_out=0 [2025-09-24 15:24:28.768] No splash screen [2025-09-24 15:24:28.768] stop dss Done [2025-09-24 15:24:28.816] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:24:28.832] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:24:28.865] /dev/mem opened. [2025-09-24 15:24:28.865] Memory mapped at address 0xffffa6786000. [2025-09-24 15:24:28.865] Read at address 0x00600018 (0xffffa6786018): 0x00000000 [2025-09-24 15:24:28.865] Write at address 0x00600018 (0xffffa6786018): 0x00400040, readback 0x00400040 [2025-09-24 15:24:29.072] Loaded PowerVR consumer services. [2025-09-24 15:24:29.121] Waiting data available... [2025-09-24 15:24:29.137] 512+0 records in [2025-09-24 15:24:29.137] 512+0 records out [2025-09-24 15:24:29.185] Starting syslogd/klogd: done [2025-09-24 15:24:29.201] DML Start [2025-09-24 15:24:29.408] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:24:29.632] DML res1: 0 [2025-09-24 15:24:30.033] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:24:30.048] Read Success [2025-09-24 15:24:30.048] Verifying certificate... [2025-09-24 15:24:30.304] Verified OK [2025-09-24 15:24:30.320] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:24:32.027] Verified OK [2025-09-24 15:24:32.027] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:24:32.563] Verified OK [2025-09-24 15:24:32.563] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:24:35.232] fs.protected_hardlinks = 1 [2025-09-24 15:24:35.232] fs.protected_symlinks = 1 [2025-09-24 15:24:35.248] kernel.modules_disabled = 1 [2025-09-24 15:24:35.441] [2025-09-24 15:24:35.441] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:24:36.640] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:24:44.351] SBL1:1210.0.1.0 [2025-09-24 15:24:44.383] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:24:45.965] SBL2:1210.0.1.0 [2025-09-24 15:24:45.997] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:24:46.109] j-A [2025-09-24 15:24:53.482] The R5 Autosar Classic is running [2025-09-24 15:24:53.482] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:24:53.482] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:24:54.090] INIT: version 2.96 booting [2025-09-24 15:24:54.202] INIT: Entering runlevel: 5 [2025-09-24 15:24:54.362] mtd24 attached [2025-09-24 15:24:54.362] mtd28 attached [2025-09-24 15:24:54.378] mtd32 attached [2025-09-24 15:24:54.479] ubi0:textures is mounted. [2025-09-24 15:24:54.479] ubi1:animations is mounted. [2025-09-24 15:24:54.479] RTNETLINK answers: File exists [2025-09-24 15:24:54.479] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:24:54.479] ubi2:dml_code is mounted. [2025-09-24 15:24:54.479] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:24:54.479] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:24:54.479] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:24:54.479] data.LB_FadeInType0=100 [2025-09-24 15:24:54.479] data.CHLH_FadeInType0=0 [2025-09-24 15:24:54.479] data.WU_FadeInDelay=0 [2025-09-24 15:24:54.479] max_time_out=0 [2025-09-24 15:24:54.479] No splash screen [2025-09-24 15:24:54.479] stop dss Done [2025-09-24 15:24:54.479] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:24:54.565] /dev/mem opened. [2025-09-24 15:24:54.565] Memory mapped at address 0xffff9bfe8000. [2025-09-24 15:24:54.565] Read at address 0x00600018 (0xffff9bfe8018): 0x00000000 [2025-09-24 15:24:54.565] Write at address 0x00600018 (0xffff9bfe8018): 0x00400040, readback 0x00400040 [2025-09-24 15:24:54.581] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:24:54.581] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:24:54.644] Loaded PowerVR consumer services. [2025-09-24 15:24:54.837] Waiting data available... [2025-09-24 15:24:54.853] 512+0 records in [2025-09-24 15:24:54.853] 512+0 records out [2025-09-24 15:24:54.885] Starting syslogd/klogd: done [2025-09-24 15:24:54.917] DML Start [2025-09-24 15:24:55.060] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:24:55.300] DML res1: 0 [2025-09-24 15:24:55.762] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:24:55.762] Read Success [2025-09-24 15:24:55.762] Verifying certificate... [2025-09-24 15:24:55.986] Verified OK [2025-09-24 15:24:56.002] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:24:57.408] Verified OK [2025-09-24 15:24:57.430] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:24:58.046] Verified OK [2025-09-24 15:24:58.046] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:25:00.781] fs.protected_hardlinks = 1 [2025-09-24 15:25:00.796] fs.protected_symlinks = 1 [2025-09-24 15:25:00.812] kernel.modules_disabled = 1 [2025-09-24 15:25:01.004] [2025-09-24 15:25:01.004] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:25:02.327] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:25:10.074] SBL1:1210.0.1.0 [2025-09-24 15:25:10.106] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:25:11.689] SBL2:1210.0.1.0 [2025-09-24 15:25:11.737] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:25:11.833] j-A [2025-09-24 15:25:19.187] The R5 Autosar Classic is running [2025-09-24 15:25:19.209] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:25:19.209] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:25:19.816] INIT: version 2.96 booting [2025-09-24 15:25:19.928] INIT: Entering runlevel: 5 [2025-09-24 15:25:20.088] mtd24 attached [2025-09-24 15:25:20.088] mtd28 attached [2025-09-24 15:25:20.120] mtd32 attached [2025-09-24 15:25:20.152] ubi0:textures is mounted. [2025-09-24 15:25:20.152] ubi1:animations is mounted. [2025-09-24 15:25:20.216] RTNETLINK answers: File exists [2025-09-24 15:25:20.216] ubi2:dml_code is mounted. [2025-09-24 15:25:20.216] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:25:20.216] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:25:20.216] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:25:20.216] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:25:20.216] data.LB_FadeInType0=100 [2025-09-24 15:25:20.216] data.CHLH_FadeInType0=0 [2025-09-24 15:25:20.216] data.WU_FadeInDelay=0 [2025-09-24 15:25:20.216] max_time_out=0 [2025-09-24 15:25:20.216] No splash screen [2025-09-24 15:25:20.216] stop dss Done [2025-09-24 15:25:20.216] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:25:20.281] /dev/mem opened. [2025-09-24 15:25:20.281] Memory mapped at address 0xffffbd07c000. [2025-09-24 15:25:20.281] Read at address 0x00600018 (0xffffbd07c018): 0x00000000 [2025-09-24 15:25:20.281] Write at address 0x00600018 (0xffffbd07c018): 0x00400040, readback 0x00400040 [2025-09-24 15:25:20.296] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:25:20.312] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:25:20.408] Loaded PowerVR consumer services. [2025-09-24 15:25:20.569] Waiting data available... [2025-09-24 15:25:20.585] 512+0 records in [2025-09-24 15:25:20.585] 512+0 records out [2025-09-24 15:25:20.632] Starting syslogd/klogd: done [2025-09-24 15:25:20.648] DML Start [2025-09-24 15:25:20.824] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:25:21.016] DML res1: 0 [2025-09-24 15:25:21.542] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:25:21.542] Read Success [2025-09-24 15:25:21.542] Verifying certificate... [2025-09-24 15:25:21.766] Verified OK [2025-09-24 15:25:21.798] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:25:23.411] Verified OK [2025-09-24 15:25:23.411] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:25:23.970] Verified OK [2025-09-24 15:25:23.986] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:25:26.576] fs.protected_hardlinks = 1 [2025-09-24 15:25:26.576] fs.protected_symlinks = 1 [2025-09-24 15:25:26.592] kernel.modules_disabled = 1 [2025-09-24 15:25:26.784] [2025-09-24 15:25:26.784] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:25:28.067] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:25:35.812] SBL1:1210.0.1.0 [2025-09-24 15:25:35.844] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:25:37.426] SBL2:1210.0.1.0 [2025-09-24 15:25:37.474] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:25:37.571] j-A [2025-09-24 15:25:44.925] The R5 Autosar Classic is running [2025-09-24 15:25:44.948] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:25:44.948] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:25:45.555] INIT: version 2.96 booting [2025-09-24 15:25:45.666] INIT: Entering runlevel: 5 [2025-09-24 15:25:45.826] mtd32 attached [2025-09-24 15:25:45.842] mtd28 attached [2025-09-24 15:25:45.842] mtd24 attached [2025-09-24 15:25:45.958] ubi0:dml_code is mounted. [2025-09-24 15:25:45.958] RTNETLINK answers: File exists [2025-09-24 15:25:45.958] ubi2:textures is mounted. [2025-09-24 15:25:45.958] ubi1:animations is mounted. [2025-09-24 15:25:45.958] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:25:45.958] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:25:45.958] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:25:45.958] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:25:45.958] data.LB_FadeInType0=100 [2025-09-24 15:25:45.958] data.CHLH_FadeInType0=0 [2025-09-24 15:25:45.958] data.WU_FadeInDelay=0 [2025-09-24 15:25:45.958] max_time_out=0 [2025-09-24 15:25:45.958] No splash screen [2025-09-24 15:25:45.958] stop dss Done [2025-09-24 15:25:45.958] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:25:46.040] /dev/mem opened. [2025-09-24 15:25:46.040] Memory mapped at address 0xffffabae9000. [2025-09-24 15:25:46.040] Read at address 0x00600018 (0xffffabae9018): 0x00000000 [2025-09-24 15:25:46.040] Write at address 0x00600018 (0xffffabae9018): 0x00400040, readback 0x00400040 [2025-09-24 15:25:46.087] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:25:46.103] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:25:46.167] Loaded PowerVR consumer services. [2025-09-24 15:25:46.311] Waiting data available... [2025-09-24 15:25:46.311] 512+0 records in [2025-09-24 15:25:46.327] 512+0 records out [2025-09-24 15:25:46.343] Starting syslogd/klogd: done [2025-09-24 15:25:46.359] DML Start [2025-09-24 15:25:46.535] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:25:46.774] DML res1: 0 [2025-09-24 15:25:47.186] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:25:47.186] Read Success [2025-09-24 15:25:47.186] Verifying certificate... [2025-09-24 15:25:47.442] Verified OK [2025-09-24 15:25:47.474] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:25:49.020] Verified OK [2025-09-24 15:25:49.020] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:25:49.683] Verified OK [2025-09-24 15:25:49.683] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:25:52.400] fs.protected_hardlinks = 1 [2025-09-24 15:25:52.400] fs.protected_symlinks = 1 [2025-09-24 15:25:52.416] kernel.modules_disabled = 1 [2025-09-24 15:25:52.609] [2025-09-24 15:25:52.609] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:25:53.776] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:26:01.559] SBL1:1210.0.1.0 [2025-09-24 15:26:01.591] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:26:03.174] SBL2:1210.0.1.0 [2025-09-24 15:26:03.206] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 15:26:03.318] j-A [2025-09-24 15:26:10.673] The R5 Autosar Classic is running [2025-09-24 15:26:10.673] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:26:10.694] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:26:11.301] INIT: version 2.96 booting [2025-09-24 15:26:11.413] INIT: Entering runlevel: 5 [2025-09-24 15:26:11.572] mtd28 attached [2025-09-24 15:26:11.572] mtd24 attached [2025-09-24 15:26:11.589] mtd32 attached [2025-09-24 15:26:11.637] RTNETLINK answers: File exists [2025-09-24 15:26:11.680] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:26:11.680] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:26:11.680] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:26:11.680] ubi0:animations is mounted. [2025-09-24 15:26:11.680] ubi1:textures is mounted. [2025-09-24 15:26:11.680] ubi2:dml_code is mounted. [2025-09-24 15:26:11.680] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:26:11.680] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:26:11.702] data.LB_FadeInType0=100 [2025-09-24 15:26:11.702] data.CHLH_FadeInType0=0 [2025-09-24 15:26:11.702] data.WU_FadeInDelay=0 [2025-09-24 15:26:11.702] max_time_out=0 [2025-09-24 15:26:11.702] No splash screen [2025-09-24 15:26:11.702] stop dss Done [2025-09-24 15:26:11.718] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:26:11.718] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:26:11.750] /dev/mem opened. [2025-09-24 15:26:11.750] Memory mapped at address 0xffff8f863000. [2025-09-24 15:26:11.776] Read at address 0x00600018 (0xffff8f863018): 0x00000000 [2025-09-24 15:26:11.776] Write at address 0x00600018 (0xffff8f863018): 0x00400040, readback 0x00400040 [2025-09-24 15:26:11.872] Loaded PowerVR consumer services. [2025-09-24 15:26:12.048] Waiting data available... [2025-09-24 15:26:12.063] 512+0 records in [2025-09-24 15:26:12.063] 512+0 records out [2025-09-24 15:26:12.095] Starting syslogd/klogd: done [2025-09-24 15:26:12.111] DML Start [2025-09-24 15:26:12.287] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:26:12.527] DML res1: 0 [2025-09-24 15:26:12.972] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:26:12.972] Read Success [2025-09-24 15:26:12.972] Verifying certificate... [2025-09-24 15:26:13.195] Verified OK [2025-09-24 15:26:13.211] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:26:14.898] Verified OK [2025-09-24 15:26:14.898] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:26:15.534] Verified OK [2025-09-24 15:26:15.534] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:26:18.187] fs.protected_hardlinks = 1 [2025-09-24 15:26:18.203] fs.protected_symlinks = 1 [2025-09-24 15:26:18.203] kernel.modules_disabled = 1 [2025-09-24 15:26:18.396] [2025-09-24 15:26:18.396] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:26:19.546] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:26:27.291] SBL1:1210.0.1.0 [2025-09-24 15:26:27.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:26:28.907] SBL2:1210.0.1.0 [2025-09-24 15:26:28.955] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:26:29.051] j-A [2025-09-24 15:26:36.405] The R5 Autosar Classic is running [2025-09-24 15:26:36.426] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:26:36.426] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:26:37.034] INIT: version 2.96 booting [2025-09-24 15:26:37.145] INIT: Entering runlevel: 5 [2025-09-24 15:26:37.305] mtd24 attached [2025-09-24 15:26:37.305] mtd28 attached [2025-09-24 15:26:37.321] mtd32 attached [2025-09-24 15:26:37.353] ubi0:textures is mounted. [2025-09-24 15:26:37.369] ubi1:animations is mounted. [2025-09-24 15:26:37.424] RTNETLINK answers: File exists [2025-09-24 15:26:37.424] ubi2:dml_code is mounted. [2025-09-24 15:26:37.424] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:26:37.424] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:26:37.424] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:26:37.424] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:26:37.424] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:26:37.424] data.LB_FadeInType0=100 [2025-09-24 15:26:37.424] data.CHLH_FadeInType0=0 [2025-09-24 15:26:37.424] data.WU_FadeInDelay=0 [2025-09-24 15:26:37.424] max_time_out=0 [2025-09-24 15:26:37.424] No splash screen [2025-09-24 15:26:37.424] stop dss Done [2025-09-24 15:26:37.456] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:26:37.501] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:26:37.501] /dev/mem opened. [2025-09-24 15:26:37.501] Memory mapped at address 0xffffaf0a8000. [2025-09-24 15:26:37.501] Read at address 0x00600018 (0xffffaf0a8018): 0x00000000 [2025-09-24 15:26:37.501] Write at address 0x00600018 (0xffffaf0a8018): 0x00400040, readback 0x00400040 [2025-09-24 15:26:37.661] Loaded PowerVR consumer services. [2025-09-24 15:26:37.773] Waiting data available... [2025-09-24 15:26:37.789] 512+0 records in [2025-09-24 15:26:37.789] 512+0 records out [2025-09-24 15:26:37.821] Starting syslogd/klogd: done [2025-09-24 15:26:37.837] DML Start [2025-09-24 15:26:38.012] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:26:38.268] DML res1: 0 [2025-09-24 15:26:38.674] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:26:38.674] Read Success [2025-09-24 15:26:38.674] Verifying certificate... [2025-09-24 15:26:38.946] Verified OK [2025-09-24 15:26:38.946] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:26:40.774] Verified OK [2025-09-24 15:26:40.774] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:26:41.343] Verified OK [2025-09-24 15:26:41.343] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:26:43.773] fs.protected_hardlinks = 1 [2025-09-24 15:26:43.788] fs.protected_symlinks = 1 [2025-09-24 15:26:43.788] kernel.modules_disabled = 1 [2025-09-24 15:26:43.981] [2025-09-24 15:26:43.981] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:26:45.335] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:26:53.013] SBL1:1210.0.1.0 [2025-09-24 15:26:53.061] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:26:54.628] SBL2:1210.0.1.0 [2025-09-24 15:26:54.676] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 15:26:54.787] j-A [2025-09-24 15:27:02.161] The R5 Autosar Classic is running [2025-09-24 15:27:02.161] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:27:02.161] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:27:02.768] INIT: version 2.96 booting [2025-09-24 15:27:02.880] INIT: Entering runlevel: 5 [2025-09-24 15:27:03.024] mtd24 attached [2025-09-24 15:27:03.056] mtd32 attached [2025-09-24 15:27:03.056] ubi0:textures is mounted. [2025-09-24 15:27:03.072] mtd28 attached [2025-09-24 15:27:03.104] ubi1:dml_code is mounted. [2025-09-24 15:27:03.171] RTNETLINK answers: File exists [2025-09-24 15:27:03.171] ubi2:animations is mounted. [2025-09-24 15:27:03.171] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:27:03.171] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:27:03.171] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:27:03.171] data.LB_FadeInType0=100 [2025-09-24 15:27:03.171] data.CHLH_FadeInType0=0 [2025-09-24 15:27:03.171] data.WU_FadeInDelay=0 [2025-09-24 15:27:03.171] max_time_out=0 [2025-09-24 15:27:03.171] No splash screen [2025-09-24 15:27:03.171] stop dss Done [2025-09-24 15:27:03.171] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:27:03.171] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:27:03.236] /dev/mem opened. [2025-09-24 15:27:03.236] Memory mapped at address 0xffffb8e2a000. [2025-09-24 15:27:03.236] Read at address 0x00600018 (0xffffb8e2a018): 0x00000000 [2025-09-24 15:27:03.236] Write at address 0x00600018 (0xffffb8e2a018): 0x00400040, readback 0x00400040 [2025-09-24 15:27:03.236] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:27:03.236] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:27:03.332] Loaded PowerVR consumer services. [2025-09-24 15:27:03.508] Waiting data available... [2025-09-24 15:27:03.555] 512+0 records in [2025-09-24 15:27:03.555] 512+0 records out [2025-09-24 15:27:03.588] Starting syslogd/klogd: done [2025-09-24 15:27:03.604] DML Start [2025-09-24 15:27:03.764] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:27:04.004] DML res1: 0 [2025-09-24 15:27:04.435] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:27:04.451] Read Success [2025-09-24 15:27:04.451] Verifying certificate... [2025-09-24 15:27:04.675] Verified OK [2025-09-24 15:27:04.691] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:27:06.391] Verified OK [2025-09-24 15:27:06.391] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:27:07.015] Verified OK [2025-09-24 15:27:07.015] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:27:09.589] fs.protected_hardlinks = 1 [2025-09-24 15:27:09.589] fs.protected_symlinks = 1 [2025-09-24 15:27:09.605] kernel.modules_disabled = 1 [2025-09-24 15:27:09.796] [2025-09-24 15:27:09.796] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:27:11.018] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:27:18.758] SBL1:1210.0.1.0 [2025-09-24 15:27:18.790] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:27:20.372] SBL2:1210.0.1.0 [2025-09-24 15:27:20.404] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:27:20.517] j-A [2025-09-24 15:27:27.892] The R5 Autosar Classic is running [2025-09-24 15:27:27.892] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:27:27.892] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:27:28.500] INIT: version 2.96 booting [2025-09-24 15:27:28.611] INIT: Entering runlevel: 5 [2025-09-24 15:27:28.755] mtd24 attached [2025-09-24 15:27:28.771] mtd32 attached [2025-09-24 15:27:28.787] mtd28 attached [2025-09-24 15:27:28.887] RTNETLINK answers: File exists [2025-09-24 15:27:28.887] ubi1:dml_code is mounted. [2025-09-24 15:27:28.887] ubi0:textures is mounted. [2025-09-24 15:27:28.887] ubi2:animations is mounted. [2025-09-24 15:27:28.887] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:27:28.887] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:27:28.887] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:27:28.887] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:27:28.887] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:27:28.887] data.LB_FadeInType0=100 [2025-09-24 15:27:28.887] data.CHLH_FadeInType0=0 [2025-09-24 15:27:28.887] data.WU_FadeInDelay=0 [2025-09-24 15:27:28.887] max_time_out=0 [2025-09-24 15:27:28.887] No splash screen [2025-09-24 15:27:28.887] stop dss Done [2025-09-24 15:27:28.935] /dev/mem opened. [2025-09-24 15:27:28.961] Memory mapped at address 0xffff85f02000. [2025-09-24 15:27:28.961] Read at address 0x00600018 (0xffff85f02018): 0x00000000 [2025-09-24 15:27:28.961] Write at address 0x00600018 (0xffff85f02018): 0x00400040, readback 0x00400040 [2025-09-24 15:27:28.976] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:27:28.992] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:27:29.121] Loaded PowerVR consumer services. [2025-09-24 15:27:29.232] Waiting data available... [2025-09-24 15:27:29.264] 512+0 records in [2025-09-24 15:27:29.264] 512+0 records out [2025-09-24 15:27:29.312] Starting syslogd/klogd: done [2025-09-24 15:27:29.328] DML Start [2025-09-24 15:27:29.520] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:27:29.759] DML res1: 0 [2025-09-24 15:27:30.182] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:27:30.182] Read Success [2025-09-24 15:27:30.182] Verifying certificate... [2025-09-24 15:27:30.405] Verified OK [2025-09-24 15:27:30.421] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:27:32.025] Verified OK [2025-09-24 15:27:32.025] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:27:32.568] Verified OK [2025-09-24 15:27:32.568] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:27:35.223] fs.protected_hardlinks = 1 [2025-09-24 15:27:35.238] fs.protected_symlinks = 1 [2025-09-24 15:27:35.238] kernel.modules_disabled = 1 [2025-09-24 15:27:35.430] [2025-09-24 15:27:35.430] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:27:36.821] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:27:44.478] SBL1:1210.0.1.0 [2025-09-24 15:27:44.510] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:27:46.093] SBL2:1210.0.1.0 [2025-09-24 15:27:46.141] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:27:46.238] j-A [2025-09-24 15:27:53.592] The R5 Autosar Classic is running [2025-09-24 15:27:53.613] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:27:53.613] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:27:54.221] INIT: version 2.96 booting [2025-09-24 15:27:54.332] INIT: Entering runlevel: 5 [2025-09-24 15:27:54.476] mtd24 attached [2025-09-24 15:27:54.492] mtd32 attached [2025-09-24 15:27:54.508] mtd28 attached [2025-09-24 15:27:54.557] ubi0:textures is mounted. [2025-09-24 15:27:54.557] RTNETLINK answers: File exists [2025-09-24 15:27:54.612] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:27:54.612] ubi2:animations is mounted. [2025-09-24 15:27:54.612] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:27:54.612] ubi1:dml_code is mounted. [2025-09-24 15:27:54.612] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:27:54.612] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:27:54.612] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:27:54.612] data.LB_FadeInType0=100 [2025-09-24 15:27:54.612] data.CHLH_FadeInType0=0 [2025-09-24 15:27:54.612] data.WU_FadeInDelay=0 [2025-09-24 15:27:54.612] max_time_out=0 [2025-09-24 15:27:54.612] No splash screen [2025-09-24 15:27:54.612] stop dss Done [2025-09-24 15:27:54.709] /dev/mem opened. [2025-09-24 15:27:54.709] Memory mapped at address 0xffffbe4d5000. [2025-09-24 15:27:54.709] Read at address 0x00600018 (0xffffbe4d5018): 0x00000000 [2025-09-24 15:27:54.709] Write at address 0x00600018 (0xffffbe4d5018): 0x00400040, readback 0x00400040 [2025-09-24 15:27:54.709] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:27:54.709] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:27:54.869] Loaded PowerVR consumer services. [2025-09-24 15:27:54.965] Waiting data available... [2025-09-24 15:27:54.981] 512+0 records in [2025-09-24 15:27:54.981] 512+0 records out [2025-09-24 15:27:55.029] Starting syslogd/klogd: done [2025-09-24 15:27:55.045] DML Start [2025-09-24 15:27:55.221] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:27:55.445] DML res1: 0 [2025-09-24 15:27:55.925] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:27:55.946] Read Success [2025-09-24 15:27:55.946] Verifying certificate... [2025-09-24 15:27:56.169] Verified OK [2025-09-24 15:27:56.185] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:27:57.796] Verified OK [2025-09-24 15:27:57.796] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:27:58.428] Verified OK [2025-09-24 15:27:58.428] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:28:01.001] fs.protected_hardlinks = 1 [2025-09-24 15:28:01.031] fs.protected_symlinks = 1 [2025-09-24 15:28:01.031] kernel.modules_disabled = 1 [2025-09-24 15:28:01.223] [2025-09-24 15:28:01.223] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:28:02.469] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:28:10.204] SBL1:1210.0.1.0 [2025-09-24 15:28:10.252] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:28:11.819] SBL2:1210.0.1.0 [2025-09-24 15:28:11.867] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:28:11.978] j-A [2025-09-24 15:28:19.318] The R5 Autosar Classic is running [2025-09-24 15:28:19.349] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:28:19.349] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:28:19.957] INIT: version 2.96 booting [2025-09-24 15:28:20.068] INIT: Entering runlevel: 5 [2025-09-24 15:28:20.213] mtd24 attached [2025-09-24 15:28:20.229] mtd32 attached [2025-09-24 15:28:20.245] mtd28 attached [2025-09-24 15:28:20.300] ubi0:textures is mounted. [2025-09-24 15:28:20.300] RTNETLINK answers: File exists [2025-09-24 15:28:20.300] ubi1:dml_code is mounted. [2025-09-24 15:28:20.300] ubi2:animations is mounted. [2025-09-24 15:28:20.300] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:28:20.338] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:28:20.338] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:28:20.338] data.LB_FadeInType0=100 [2025-09-24 15:28:20.338] data.CHLH_FadeInType0=0 [2025-09-24 15:28:20.338] data.WU_FadeInDelay=0 [2025-09-24 15:28:20.338] max_time_out=0 [2025-09-24 15:28:20.338] No splash screen [2025-09-24 15:28:20.338] stop dss Done [2025-09-24 15:28:20.354] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:28:20.370] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:28:20.426] /dev/mem opened. [2025-09-24 15:28:20.426] Memory mapped at address 0xffff92c48000. [2025-09-24 15:28:20.426] Read at address 0x00600018 (0xffff92c48018): 0x00000000 [2025-09-24 15:28:20.426] Write at address 0x00600018 (0xffff92c48018): 0x00400040, readback 0x00400040 [2025-09-24 15:28:20.490] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:28:20.522] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:28:20.602] Loaded PowerVR consumer services. [2025-09-24 15:28:20.715] Waiting data available... [2025-09-24 15:28:20.715] 512+0 records in [2025-09-24 15:28:20.731] 512+0 records out [2025-09-24 15:28:20.747] Starting syslogd/klogd: done [2025-09-24 15:28:20.763] DML Start [2025-09-24 15:28:20.955] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:28:21.130] DML res1: 0 [2025-09-24 15:28:21.571] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:28:21.571] Read Success [2025-09-24 15:28:21.571] Verifying certificate... [2025-09-24 15:28:21.827] Verified OK [2025-09-24 15:28:21.842] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:28:23.512] Verified OK [2025-09-24 15:28:23.512] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:28:24.142] Verified OK [2025-09-24 15:28:24.142] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:28:26.732] fs.protected_hardlinks = 1 [2025-09-24 15:28:26.732] fs.protected_symlinks = 1 [2025-09-24 15:28:26.748] kernel.modules_disabled = 1 [2025-09-24 15:28:26.940] [2025-09-24 15:28:26.940] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:28:28.162] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:28:35.944] SBL1:1210.0.1.0 [2025-09-24 15:28:35.992] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:28:37.559] SBL2:1210.0.1.0 [2025-09-24 15:28:37.607] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 15:28:37.702] j-A [2025-09-24 15:28:45.057] The R5 Autosar Classic is running [2025-09-24 15:28:45.082] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:28:45.082] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:28:45.691] INIT: version 2.96 booting [2025-09-24 15:28:45.802] INIT: Entering runlevel: 5 [2025-09-24 15:28:45.946] mtd24 attached [2025-09-24 15:28:45.962] mtd28 attached [2025-09-24 15:28:45.962] mtd32 attached [2025-09-24 15:28:46.010] ubi0:textures is mounted. [2025-09-24 15:28:46.081] RTNETLINK answers: File exists [2025-09-24 15:28:46.081] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:28:46.081] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:28:46.081] ubi1:animations is mounted. [2025-09-24 15:28:46.081] ubi2:dml_code is mounted. [2025-09-24 15:28:46.081] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:28:46.081] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:28:46.081] data.LB_FadeInType0=100 [2025-09-24 15:28:46.081] data.CHLH_FadeInType0=0 [2025-09-24 15:28:46.081] data.WU_FadeInDelay=0 [2025-09-24 15:28:46.081] max_time_out=0 [2025-09-24 15:28:46.081] No splash screen [2025-09-24 15:28:46.081] stop dss Done [2025-09-24 15:28:46.081] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:28:46.158] /dev/mem opened. [2025-09-24 15:28:46.158] Memory mapped at address 0xffff9fdc9000. [2025-09-24 15:28:46.158] Read at address 0x00600018 (0xffff9fdc9018): 0x00000000 [2025-09-24 15:28:46.158] Write at address 0x00600018 (0xffff9fdc9018): 0x00400040, readback 0x00400040 [2025-09-24 15:28:46.158] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:28:46.158] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:28:46.286] Loaded PowerVR consumer services. [2025-09-24 15:28:46.446] Waiting data available... [2025-09-24 15:28:46.478] 512+0 records in [2025-09-24 15:28:46.478] 512+0 records out [2025-09-24 15:28:46.510] Starting syslogd/klogd: done [2025-09-24 15:28:46.526] DML Start [2025-09-24 15:28:46.701] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:28:46.910] DML res1: 0 [2025-09-24 15:28:47.370] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:28:47.370] Read Success [2025-09-24 15:28:47.370] Verifying certificate... [2025-09-24 15:28:47.594] Verified OK [2025-09-24 15:28:47.610] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:28:49.254] Verified OK [2025-09-24 15:28:49.254] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:28:49.839] Verified OK [2025-09-24 15:28:49.839] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:28:52.333] fs.protected_hardlinks = 1 [2025-09-24 15:28:52.333] fs.protected_symlinks = 1 [2025-09-24 15:28:52.349] kernel.modules_disabled = 1 [2025-09-24 15:28:52.541] [2025-09-24 15:28:52.541] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:28:53.969] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:29:01.667] SBL1:1210.0.1.0 [2025-09-24 15:29:01.715] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:29:03.281] SBL2:1210.0.1.0 [2025-09-24 15:29:03.329] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:29:03.425] j-A [2025-09-24 15:29:10.781] The R5 Autosar Classic is running [2025-09-24 15:29:10.806] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:29:10.806] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:29:11.413] INIT: version 2.96 booting [2025-09-24 15:29:11.524] INIT: Entering runlevel: 5 [2025-09-24 15:29:11.669] mtd24 attached [2025-09-24 15:29:11.685] mtd28 attached [2025-09-24 15:29:11.701] mtd32 attached [2025-09-24 15:29:11.749] RTNETLINK answers: File exists [2025-09-24 15:29:11.749] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:29:11.789] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:29:11.789] ubi1:animations is mounted. [2025-09-24 15:29:11.789] ubi0:textures is mounted. [2025-09-24 15:29:11.789] ubi2:dml_code is mounted. [2025-09-24 15:29:11.789] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:29:11.789] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:29:11.789] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:29:11.810] data.LB_FadeInType0=100 [2025-09-24 15:29:11.810] data.CHLH_FadeInType0=0 [2025-09-24 15:29:11.810] data.WU_FadeInDelay=0 [2025-09-24 15:29:11.810] max_time_out=0 [2025-09-24 15:29:11.810] No splash screen [2025-09-24 15:29:11.810] stop dss Done [2025-09-24 15:29:11.842] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:29:11.859] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:29:11.859] /dev/mem opened. [2025-09-24 15:29:11.890] Memory mapped at address 0xffffaa5a3000. [2025-09-24 15:29:11.890] Read at address 0x00600018 (0xffffaa5a3018): 0x00000000 [2025-09-24 15:29:11.890] Write at address 0x00600018 (0xffffaa5a3018): 0x00400040, readback 0x00400040 [2025-09-24 15:29:12.003] Loaded PowerVR consumer services. [2025-09-24 15:29:12.162] Waiting data available... [2025-09-24 15:29:12.179] 512+0 records in [2025-09-24 15:29:12.195] 512+0 records out [2025-09-24 15:29:12.227] Starting syslogd/klogd: done [2025-09-24 15:29:12.243] DML Start [2025-09-24 15:29:12.418] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:29:12.610] DML res1: 0 [2025-09-24 15:29:13.042] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:29:13.063] Read Success [2025-09-24 15:29:13.063] Verifying certificate... [2025-09-24 15:29:13.303] Verified OK [2025-09-24 15:29:13.319] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:29:14.845] Verified OK [2025-09-24 15:29:14.845] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:29:15.388] Verified OK [2025-09-24 15:29:15.388] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:29:18.123] fs.protected_hardlinks = 1 [2025-09-24 15:29:18.123] fs.protected_symlinks = 1 [2025-09-24 15:29:18.139] kernel.modules_disabled = 1 [2025-09-24 15:29:18.331] [2025-09-24 15:29:18.331] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:29:19.669] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:29:27.390] SBL1:1210.0.1.0 [2025-09-24 15:29:27.422] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:29:29.005] SBL2:1210.0.1.0 [2025-09-24 15:29:29.037] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:29:29.150] j-A [2025-09-24 15:29:36.505] The R5 Autosar Classic is running [2025-09-24 15:29:36.505] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:29:36.525] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:29:37.132] INIT: version 2.96 booting [2025-09-24 15:29:37.245] INIT: Entering runlevel: 5 [2025-09-24 15:29:37.389] mtd28 attached [2025-09-24 15:29:37.405] mtd24 attached [2025-09-24 15:29:37.421] mtd32 attached [2025-09-24 15:29:37.504] RTNETLINK answers: File exists [2025-09-24 15:29:37.504] ubi1:textures is mounted. [2025-09-24 15:29:37.504] ubi0:animations is mounted. [2025-09-24 15:29:37.504] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:29:37.504] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:29:37.504] ubi2:dml_code is mounted. [2025-09-24 15:29:37.504] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:29:37.504] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:29:37.504] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:29:37.526] data.LB_FadeInType0=100 [2025-09-24 15:29:37.526] data.CHLH_FadeInType0=0 [2025-09-24 15:29:37.526] data.WU_FadeInDelay=0 [2025-09-24 15:29:37.526] max_time_out=0 [2025-09-24 15:29:37.526] No splash screen [2025-09-24 15:29:37.526] stop dss Done [2025-09-24 15:29:37.542] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:29:37.558] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:29:37.574] /dev/mem opened. [2025-09-24 15:29:37.606] Memory mapped at address 0xffff93345000. [2025-09-24 15:29:37.606] Read at address 0x00600018 (0xffff93345018): 0x00000000 [2025-09-24 15:29:37.606] Write at address 0x00600018 (0xffff93345018): 0x00400040, readback 0x00400040 [2025-09-24 15:29:37.686] Loaded PowerVR consumer services. [2025-09-24 15:29:37.863] Waiting data available... [2025-09-24 15:29:37.878] 512+0 records in [2025-09-24 15:29:37.878] 512+0 records out [2025-09-24 15:29:37.910] Starting syslogd/klogd: done [2025-09-24 15:29:37.926] DML Start [2025-09-24 15:29:38.071] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:29:38.326] DML res1: 0 [2025-09-24 15:29:38.764] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:29:38.764] Read Success [2025-09-24 15:29:38.764] Verifying certificate... [2025-09-24 15:29:38.988] Verified OK [2025-09-24 15:29:39.004] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:29:40.646] Verified OK [2025-09-24 15:29:40.646] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:29:41.215] Verified OK [2025-09-24 15:29:41.215] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:29:44.041] fs.protected_hardlinks = 1 [2025-09-24 15:29:44.041] fs.protected_symlinks = 1 [2025-09-24 15:29:44.041] kernel.modules_disabled = 1 [2025-09-24 15:29:44.218] [2025-09-24 15:29:44.218] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:29:45.364] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:29:53.121] SBL1:1210.0.1.0 [2025-09-24 15:29:53.169] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:29:54.736] SBL2:1210.0.1.0 [2025-09-24 15:29:54.784] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:29:54.896] j-A [2025-09-24 15:30:02.235] The R5 Autosar Classic is running [2025-09-24 15:30:02.260] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:30:02.260] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:30:02.867] INIT: version 2.96 booting [2025-09-24 15:30:02.979] INIT: Entering runlevel: 5 [2025-09-24 15:30:03.139] mtd32 attached [2025-09-24 15:30:03.155] mtd24 attached [2025-09-24 15:30:03.155] mtd28 attached [2025-09-24 15:30:03.187] ubi0:dml_code is mounted. [2025-09-24 15:30:03.202] RTNETLINK answers: File exists [2025-09-24 15:30:03.241] ubi1:textures is mounted. [2025-09-24 15:30:03.241] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:30:03.241] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:30:03.241] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:30:03.241] ubi2:animations is mounted. [2025-09-24 15:30:03.241] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:30:03.241] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:30:03.257] data.LB_FadeInType0=100 [2025-09-24 15:30:03.257] data.CHLH_FadeInType0=0 [2025-09-24 15:30:03.278] data.WU_FadeInDelay=0 [2025-09-24 15:30:03.278] max_time_out=0 [2025-09-24 15:30:03.278] No splash screen [2025-09-24 15:30:03.278] stop dss Done [2025-09-24 15:30:03.294] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:30:03.310] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:30:03.362] /dev/mem opened. [2025-09-24 15:30:03.362] Memory mapped at address 0xffff8e0ec000. [2025-09-24 15:30:03.362] Read at address 0x00600018 (0xffff8e0ec018): 0x00000000 [2025-09-24 15:30:03.362] Write at address 0x00600018 (0xffff8e0ec018): 0x00400040, readback 0x00400040 [2025-09-24 15:30:03.459] Loaded PowerVR consumer services. [2025-09-24 15:30:03.632] Waiting data available... [2025-09-24 15:30:03.632] 512+0 records in [2025-09-24 15:30:03.632] 512+0 records out [2025-09-24 15:30:03.648] Starting syslogd/klogd: done [2025-09-24 15:30:03.664] DML Start [2025-09-24 15:30:03.855] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:30:04.015] DML res1: 0 [2025-09-24 15:30:04.526] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:30:04.552] Read Success [2025-09-24 15:30:04.552] Verifying certificate... [2025-09-24 15:30:04.792] Verified OK [2025-09-24 15:30:04.808] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:30:06.513] Verified OK [2025-09-24 15:30:06.513] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:30:07.133] Verified OK [2025-09-24 15:30:07.133] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:30:09.692] fs.protected_hardlinks = 1 [2025-09-24 15:30:09.692] fs.protected_symlinks = 1 [2025-09-24 15:30:09.708] kernel.modules_disabled = 1 [2025-09-24 15:30:09.899] [2025-09-24 15:30:09.899] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:30:11.088] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:30:18.825] SBL1:1210.0.1.0 [2025-09-24 15:30:18.873] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:30:20.440] SBL2:1210.0.1.0 [2025-09-24 15:30:20.488] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:30:20.600] j-A [2025-09-24 15:30:27.971] The R5 Autosar Classic is running [2025-09-24 15:30:27.971] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:30:27.971] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:30:28.578] INIT: version 2.96 booting [2025-09-24 15:30:28.690] INIT: Entering runlevel: 5 [2025-09-24 15:30:28.834] mtd24 attached [2025-09-24 15:30:28.850] mtd32 attached [2025-09-24 15:30:28.866] mtd28 attached [2025-09-24 15:30:28.914] ubi0:textures is mounted. [2025-09-24 15:30:28.914] RTNETLINK answers: File exists [2025-09-24 15:30:28.972] ubi1:dml_code is mounted. [2025-09-24 15:30:28.972] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:30:28.972] ubi2:animations is mounted. [2025-09-24 15:30:28.972] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:30:28.972] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:30:28.972] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:30:28.972] data.LB_FadeInType0=100 [2025-09-24 15:30:28.972] data.CHLH_FadeInType0=0 [2025-09-24 15:30:28.972] data.WU_FadeInDelay=0 [2025-09-24 15:30:28.972] max_time_out=0 [2025-09-24 15:30:28.972] No splash screen [2025-09-24 15:30:28.972] stop dss Done [2025-09-24 15:30:28.972] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:30:29.004] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:30:29.019] /dev/mem opened. [2025-09-24 15:30:29.019] Memory mapped at address 0xffffa3e4c000. [2025-09-24 15:30:29.051] Read at address 0x00600018 (0xffffa3e4c018): 0x00000000 [2025-09-24 15:30:29.051] Write at address 0x00600018 (0xffffa3e4c018): 0x00400040, readback 0x00400040 [2025-09-24 15:30:29.051] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:30:29.163] Loaded PowerVR consumer services. [2025-09-24 15:30:29.324] Waiting data available... [2025-09-24 15:30:29.356] 512+0 records in [2025-09-24 15:30:29.356] 512+0 records out [2025-09-24 15:30:29.388] Starting syslogd/klogd: done [2025-09-24 15:30:29.404] DML Start [2025-09-24 15:30:29.611] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:30:29.835] DML res1: 0 [2025-09-24 15:30:30.229] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:30:30.229] Read Success [2025-09-24 15:30:30.229] Verifying certificate... [2025-09-24 15:30:30.469] Verified OK [2025-09-24 15:30:30.501] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:30:32.148] Verified OK [2025-09-24 15:30:32.148] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:30:32.836] Verified OK [2025-09-24 15:30:32.836] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:30:35.441] fs.protected_hardlinks = 1 [2025-09-24 15:30:35.457] fs.protected_symlinks = 1 [2025-09-24 15:30:35.473] kernel.modules_disabled = 1 [2025-09-24 15:30:35.666] [2025-09-24 15:30:35.666] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:30:36.859] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:30:44.554] SBL1:1210.0.1.0 [2025-09-24 15:30:44.586] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:30:46.168] SBL2:1210.0.1.0 [2025-09-24 15:30:46.216] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:30:46.312] j-A [2025-09-24 15:30:53.666] The R5 Autosar Classic is running [2025-09-24 15:30:53.690] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:30:53.690] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:30:54.297] INIT: version 2.96 booting [2025-09-24 15:30:54.409] INIT: Entering runlevel: 5 [2025-09-24 15:30:54.570] mtd24 attached [2025-09-24 15:30:54.585] mtd32 attached [2025-09-24 15:30:54.601] ubi0:textures is mounted. [2025-09-24 15:30:54.601] mtd28 attached [2025-09-24 15:30:54.633] ubi1:dml_code is mounted. [2025-09-24 15:30:54.633] RTNETLINK answers: File exists [2025-09-24 15:30:54.692] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:30:54.692] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:30:54.692] ubi2:animations is mounted. [2025-09-24 15:30:54.692] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:30:54.692] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:30:54.692] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:30:54.692] data.LB_FadeInType0=100 [2025-09-24 15:30:54.692] data.CHLH_FadeInType0=0 [2025-09-24 15:30:54.692] data.WU_FadeInDelay=0 [2025-09-24 15:30:54.692] max_time_out=0 [2025-09-24 15:30:54.692] No splash screen [2025-09-24 15:30:54.692] stop dss Done [2025-09-24 15:30:54.740] /dev/mem opened. [2025-09-24 15:30:54.788] Memory mapped at address 0xffffb904f000. [2025-09-24 15:30:54.788] Read at address 0x00600018 (0xffffb904f018): 0x00000000 [2025-09-24 15:30:54.788] Write at address 0x00600018 (0xffffb904f018): 0x00400040, readback 0x00400040 [2025-09-24 15:30:54.788] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:30:54.788] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:30:55.028] Waiting data available... [2025-09-24 15:30:55.044] Loaded PowerVR consumer services. [2025-09-24 15:30:55.076] 512+0 records in [2025-09-24 15:30:55.076] 512+0 records out [2025-09-24 15:30:55.124] Starting syslogd/klogd: done [2025-09-24 15:30:55.124] DML Start [2025-09-24 15:30:55.300] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:30:55.492] DML res1: 0 [2025-09-24 15:30:55.952] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:30:55.952] Read Success [2025-09-24 15:30:55.952] Verifying certificate... [2025-09-24 15:30:56.208] Verified OK [2025-09-24 15:30:56.224] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:30:57.935] Verified OK [2025-09-24 15:30:57.935] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:30:58.509] Verified OK [2025-09-24 15:30:58.509] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:31:00.971] fs.protected_hardlinks = 1 [2025-09-24 15:31:00.987] fs.protected_symlinks = 1 [2025-09-24 15:31:00.987] kernel.modules_disabled = 1 [2025-09-24 15:31:01.179] [2025-09-24 15:31:01.179] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:31:02.547] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:31:10.277] SBL1:1210.0.1.0 [2025-09-24 15:31:10.325] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:31:11.893] SBL2:1210.0.1.0 [2025-09-24 15:31:11.941] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:31:12.052] j-A [2025-09-24 15:31:19.421] The R5 Autosar Classic is running [2025-09-24 15:31:19.421] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:31:19.421] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:31:20.029] INIT: version 2.96 booting [2025-09-24 15:31:20.140] INIT: Entering runlevel: 5 [2025-09-24 15:31:20.285] mtd24 attached [2025-09-24 15:31:20.301] mtd32 attached [2025-09-24 15:31:20.317] mtd28 attached [2025-09-24 15:31:20.417] RTNETLINK answers: File exists [2025-09-24 15:31:20.417] ubi0:textures is mounted. [2025-09-24 15:31:20.417] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:31:20.417] ubi1:dml_code is mounted. [2025-09-24 15:31:20.417] ubi2:animations is mounted. [2025-09-24 15:31:20.417] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:31:20.417] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:31:20.417] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:31:20.417] data.LB_FadeInType0=100 [2025-09-24 15:31:20.417] data.CHLH_FadeInType0=0 [2025-09-24 15:31:20.417] data.WU_FadeInDelay=0 [2025-09-24 15:31:20.417] max_time_out=0 [2025-09-24 15:31:20.417] No splash screen [2025-09-24 15:31:20.417] stop dss Done [2025-09-24 15:31:20.417] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:31:20.465] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:31:20.465] /dev/mem opened. [2025-09-24 15:31:20.496] Memory mapped at address 0xffff88215000. [2025-09-24 15:31:20.496] Read at address 0x00600018 (0xffff88215018): 0x00000000 [2025-09-24 15:31:20.496] Write at address 0x00600018 (0xffff88215018): 0x00400040, readback 0x00400040 [2025-09-24 15:31:20.496] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:31:20.609] Loaded PowerVR consumer services. [2025-09-24 15:31:20.784] Waiting data available... [2025-09-24 15:31:20.800] 512+0 records in [2025-09-24 15:31:20.800] 512+0 records out [2025-09-24 15:31:20.832] Starting syslogd/klogd: done [2025-09-24 15:31:20.848] DML Start [2025-09-24 15:31:21.008] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:31:21.184] DML res1: 0 [2025-09-24 15:31:21.701] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:31:21.701] Read Success [2025-09-24 15:31:21.701] Verifying certificate... [2025-09-24 15:31:21.941] Verified OK [2025-09-24 15:31:21.957] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:31:23.538] Verified OK [2025-09-24 15:31:23.538] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:31:24.189] Verified OK [2025-09-24 15:31:24.189] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:31:26.811] fs.protected_hardlinks = 1 [2025-09-24 15:31:26.811] fs.protected_symlinks = 1 [2025-09-24 15:31:26.827] kernel.modules_disabled = 1 [2025-09-24 15:31:27.019] [2025-09-24 15:31:27.019] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:31:28.292] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:31:36.027] SBL1:1210.0.1.0 [2025-09-24 15:31:36.058] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:31:37.641] SBL2:1210.0.1.0 [2025-09-24 15:31:37.673] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:31:37.785] j-A [2025-09-24 15:31:45.139] The R5 Autosar Classic is running [2025-09-24 15:31:45.139] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:31:45.160] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:31:45.767] INIT: version 2.96 booting [2025-09-24 15:31:45.879] INIT: Entering runlevel: 5 [2025-09-24 15:31:46.023] mtd28 attached [2025-09-24 15:31:46.039] mtd24 attached [2025-09-24 15:31:46.055] mtd32 attached [2025-09-24 15:31:46.071] ubi0:animations is mounted. [2025-09-24 15:31:46.138] RTNETLINK answers: File exists [2025-09-24 15:31:46.138] ubi1:textures is mounted. [2025-09-24 15:31:46.138] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:31:46.138] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:31:46.138] ubi2:dml_code is mounted. [2025-09-24 15:31:46.138] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:31:46.138] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:31:46.138] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:31:46.138] data.LB_FadeInType0=100 [2025-09-24 15:31:46.159] data.CHLH_FadeInType0=0 [2025-09-24 15:31:46.159] data.WU_FadeInDelay=0 [2025-09-24 15:31:46.159] max_time_out=0 [2025-09-24 15:31:46.159] No splash screen [2025-09-24 15:31:46.159] stop dss Done [2025-09-24 15:31:46.175] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:31:46.191] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:31:46.230] /dev/mem opened. [2025-09-24 15:31:46.230] Memory mapped at address 0xffff93cc7000. [2025-09-24 15:31:46.230] Read at address 0x00600018 (0xffff93cc7018): 0x00000000 [2025-09-24 15:31:46.230] Write at address 0x00600018 (0xffff93cc7018): 0x00400040, readback 0x00400040 [2025-09-24 15:31:46.374] Loaded PowerVR consumer services. [2025-09-24 15:31:46.502] Waiting data available... [2025-09-24 15:31:46.534] 512+0 records in [2025-09-24 15:31:46.534] 512+0 records out [2025-09-24 15:31:46.581] Starting syslogd/klogd: done [2025-09-24 15:31:46.598] DML Start [2025-09-24 15:31:46.790] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:31:46.981] DML res1: 0 [2025-09-24 15:31:47.435] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:31:47.435] Read Success [2025-09-24 15:31:47.435] Verifying certificate... [2025-09-24 15:31:47.691] Verified OK [2025-09-24 15:31:47.707] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:31:49.417] Verified OK [2025-09-24 15:31:49.417] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:31:49.897] Verified OK [2025-09-24 15:31:49.897] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:31:52.375] fs.protected_hardlinks = 1 [2025-09-24 15:31:52.375] fs.protected_symlinks = 1 [2025-09-24 15:31:52.391] kernel.modules_disabled = 1 [2025-09-24 15:31:52.567] [2025-09-24 15:31:52.567] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:31:54.018] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:32:01.749] SBL1:1210.0.1.0 [2025-09-24 15:32:01.780] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:32:03.364] SBL2:1210.0.1.0 [2025-09-24 15:32:03.412] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:32:03.508] j-A [2025-09-24 15:32:10.862] The R5 Autosar Classic is running [2025-09-24 15:32:10.884] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:32:10.884] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:32:11.491] INIT: version 2.96 booting [2025-09-24 15:32:11.603] INIT: Entering runlevel: 5 [2025-09-24 15:32:11.747] mtd24 attached [2025-09-24 15:32:11.763] mtd28 attached [2025-09-24 15:32:11.779] mtd32 attached [2025-09-24 15:32:11.811] ubi0:textures is mounted. [2025-09-24 15:32:11.827] RTNETLINK answers: File exists [2025-09-24 15:32:11.827] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:32:11.864] ubi1:animations is mounted. [2025-09-24 15:32:11.864] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:32:11.864] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:32:11.864] ubi2:dml_code is mounted. [2025-09-24 15:32:11.864] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:32:11.864] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:32:11.885] data.LB_FadeInType0=100 [2025-09-24 15:32:11.885] data.CHLH_FadeInType0=0 [2025-09-24 15:32:11.885] data.WU_FadeInDelay=0 [2025-09-24 15:32:11.885] max_time_out=0 [2025-09-24 15:32:11.885] No splash screen [2025-09-24 15:32:11.885] stop dss Done [2025-09-24 15:32:11.917] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:32:11.933] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:32:11.949] /dev/mem opened. [2025-09-24 15:32:11.949] Memory mapped at address 0xffff81b51000. [2025-09-24 15:32:11.975] Read at address 0x00600018 (0xffff81b51018): 0x00000000 [2025-09-24 15:32:11.975] Write at address 0x00600018 (0xffff81b51018): 0x00400040, readback 0x00400040 [2025-09-24 15:32:12.054] Loaded PowerVR consumer services. [2025-09-24 15:32:12.231] Waiting data available... [2025-09-24 15:32:12.262] 512+0 records in [2025-09-24 15:32:12.262] 512+0 records out [2025-09-24 15:32:12.294] Starting syslogd/klogd: done [2025-09-24 15:32:12.326] DML Start [2025-09-24 15:32:12.502] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:32:12.710] DML res1: 0 [2025-09-24 15:32:13.206] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:32:13.222] Read Success [2025-09-24 15:32:13.222] Verifying certificate... [2025-09-24 15:32:13.477] Verified OK [2025-09-24 15:32:13.493] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:32:15.108] Verified OK [2025-09-24 15:32:15.108] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:32:15.712] Verified OK [2025-09-24 15:32:15.712] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:32:18.238] fs.protected_hardlinks = 1 [2025-09-24 15:32:18.238] fs.protected_symlinks = 1 [2025-09-24 15:32:18.254] kernel.modules_disabled = 1 [2025-09-24 15:32:18.445] [2025-09-24 15:32:18.445] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:32:19.737] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:32:27.473] SBL1:1210.0.1.0 [2025-09-24 15:32:27.505] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:32:29.088] SBL2:1210.0.1.0 [2025-09-24 15:32:29.136] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:32:29.232] j-A [2025-09-24 15:32:36.586] The R5 Autosar Classic is running [2025-09-24 15:32:36.607] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:32:36.607] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:32:37.215] INIT: version 2.96 booting [2025-09-24 15:32:37.327] INIT: Entering runlevel: 5 [2025-09-24 15:32:37.487] mtd28 attached [2025-09-24 15:32:37.487] mtd24 attached [2025-09-24 15:32:37.502] mtd32 attached [2025-09-24 15:32:37.550] RTNETLINK answers: File exists [2025-09-24 15:32:37.598] ubi0:animations is mounted. [2025-09-24 15:32:37.598] ubi1:textures is mounted. [2025-09-24 15:32:37.598] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:32:37.598] ubi2:dml_code is mounted. [2025-09-24 15:32:37.598] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:32:37.598] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:32:37.598] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:32:37.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:32:37.598] data.LB_FadeInType0=100 [2025-09-24 15:32:37.598] data.CHLH_FadeInType0=0 [2025-09-24 15:32:37.619] data.WU_FadeInDelay=0 [2025-09-24 15:32:37.619] max_time_out=0 [2025-09-24 15:32:37.619] No splash screen [2025-09-24 15:32:37.619] stop dss Done [2025-09-24 15:32:37.693] /dev/mem opened. [2025-09-24 15:32:37.693] Memory mapped at address 0xffffb79d7000. [2025-09-24 15:32:37.693] Read at address 0x00600018 (0xffffb79d7018): 0x00000000 [2025-09-24 15:32:37.693] Write at address 0x00600018 (0xffffb79d7018): 0x00400040, readback 0x00400040 [2025-09-24 15:32:37.693] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:32:37.709] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:32:37.788] Loaded PowerVR consumer services. [2025-09-24 15:32:37.949] Waiting data available... [2025-09-24 15:32:37.964] 512+0 records in [2025-09-24 15:32:37.980] 512+0 records out [2025-09-24 15:32:38.012] Starting syslogd/klogd: done [2025-09-24 15:32:38.044] DML Start [2025-09-24 15:32:38.204] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:32:38.444] DML res1: 0 [2025-09-24 15:32:38.875] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:32:38.875] Read Success [2025-09-24 15:32:38.875] Verifying certificate... [2025-09-24 15:32:39.114] Verified OK [2025-09-24 15:32:39.114] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:32:40.776] Verified OK [2025-09-24 15:32:40.776] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:32:41.431] Verified OK [2025-09-24 15:32:41.431] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:32:44.052] fs.protected_hardlinks = 1 [2025-09-24 15:32:44.068] fs.protected_symlinks = 1 [2025-09-24 15:32:44.068] kernel.modules_disabled = 1 [2025-09-24 15:32:44.260] [2025-09-24 15:32:44.260] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:32:45.454] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:32:53.187] SBL1:1210.0.1.0 [2025-09-24 15:32:53.235] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:32:54.802] SBL2:1210.0.1.0 [2025-09-24 15:32:54.850] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:32:54.947] j-A [2025-09-24 15:33:02.301] The R5 Autosar Classic is running [2025-09-24 15:33:02.324] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:33:02.324] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:33:02.931] INIT: version 2.96 booting [2025-09-24 15:33:03.043] INIT: Entering runlevel: 5 [2025-09-24 15:33:03.203] mtd28 attached [2025-09-24 15:33:03.203] mtd24 attached [2025-09-24 15:33:03.219] mtd32 attached [2025-09-24 15:33:03.267] ubi0:animations is mounted. [2025-09-24 15:33:03.267] RTNETLINK answers: File exists [2025-09-24 15:33:03.337] ubi1:textures is mounted. [2025-09-24 15:33:03.337] ubi2:dml_code is mounted. [2025-09-24 15:33:03.337] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:33:03.337] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:33:03.337] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:33:03.337] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:33:03.337] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:33:03.337] data.LB_FadeInType0=100 [2025-09-24 15:33:03.337] data.CHLH_FadeInType0=0 [2025-09-24 15:33:03.337] data.WU_FadeInDelay=0 [2025-09-24 15:33:03.337] max_time_out=0 [2025-09-24 15:33:03.337] No splash screen [2025-09-24 15:33:03.337] stop dss Done [2025-09-24 15:33:03.385] /dev/mem opened. [2025-09-24 15:33:03.385] Memory mapped at address 0xffff9955f000. [2025-09-24 15:33:03.411] Read at address 0x00600018 (0xffff9955f018): 0x00000000 [2025-09-24 15:33:03.411] Write at address 0x00600018 (0xffff9955f018): 0x00400040, readback 0x00400040 [2025-09-24 15:33:03.439] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:33:03.439] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:33:03.567] Loaded PowerVR consumer services. [2025-09-24 15:33:03.711] Waiting data available... [2025-09-24 15:33:03.711] 512+0 records in [2025-09-24 15:33:03.727] 512+0 records out [2025-09-24 15:33:03.759] Starting syslogd/klogd: done [2025-09-24 15:33:03.774] DML Start [2025-09-24 15:33:03.919] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:33:04.127] DML res1: 0 [2025-09-24 15:33:04.647] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:33:04.647] Read Success [2025-09-24 15:33:04.647] Verifying certificate... [2025-09-24 15:33:04.870] Verified OK [2025-09-24 15:33:04.886] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:33:06.527] Verified OK [2025-09-24 15:33:06.527] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:33:07.102] Verified OK [2025-09-24 15:33:07.118] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:33:09.676] fs.protected_hardlinks = 1 [2025-09-24 15:33:09.692] fs.protected_symlinks = 1 [2025-09-24 15:33:09.708] kernel.modules_disabled = 1 [2025-09-24 15:33:09.900] [2025-09-24 15:33:09.900] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:33:11.201] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:33:18.912] SBL1:1210.0.1.0 [2025-09-24 15:33:18.944] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:33:20.528] SBL2:1210.0.1.0 [2025-09-24 15:33:20.559] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:33:20.672] j-A [2025-09-24 15:33:28.027] The R5 Autosar Classic is running [2025-09-24 15:33:28.027] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:33:28.048] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:33:28.655] INIT: version 2.96 booting [2025-09-24 15:33:28.767] INIT: Entering runlevel: 5 [2025-09-24 15:33:28.911] mtd28 attached [2025-09-24 15:33:28.927] mtd24 attached [2025-09-24 15:33:28.959] mtd32 attached [2025-09-24 15:33:28.959] ubi0:animations is mounted. [2025-09-24 15:33:28.991] ubi1:textures is mounted. [2025-09-24 15:33:28.991] RTNETLINK answers: File exists [2025-09-24 15:33:29.048] ubi2:dml_code is mounted. [2025-09-24 15:33:29.048] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:33:29.048] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:33:29.048] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:33:29.048] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:33:29.048] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:33:29.048] data.LB_FadeInType0=100 [2025-09-24 15:33:29.048] data.CHLH_FadeInType0=0 [2025-09-24 15:33:29.048] data.WU_FadeInDelay=0 [2025-09-24 15:33:29.048] max_time_out=0 [2025-09-24 15:33:29.048] No splash screen [2025-09-24 15:33:29.048] stop dss Done [2025-09-24 15:33:29.079] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:33:29.123] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:33:29.123] /dev/mem opened. [2025-09-24 15:33:29.123] Memory mapped at address 0xffff87128000. [2025-09-24 15:33:29.123] Read at address 0x00600018 (0xffff87128018): 0x00000000 [2025-09-24 15:33:29.123] Write at address 0x00600018 (0xffff87128018): 0x00400040, readback 0x00400040 [2025-09-24 15:33:29.380] Loaded PowerVR consumer services. [2025-09-24 15:33:29.428] Waiting data available... [2025-09-24 15:33:29.444] 512+0 records in [2025-09-24 15:33:29.444] 512+0 records out [2025-09-24 15:33:29.475] Starting syslogd/klogd: done [2025-09-24 15:33:29.492] DML Start [2025-09-24 15:33:29.668] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:33:29.907] DML res1: 0 [2025-09-24 15:33:30.284] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:33:30.284] Read Success [2025-09-24 15:33:30.284] Verifying certificate... [2025-09-24 15:33:30.556] Verified OK [2025-09-24 15:33:30.571] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:33:32.298] Verified OK [2025-09-24 15:33:32.298] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:33:32.826] Verified OK [2025-09-24 15:33:32.826] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:33:35.320] fs.protected_hardlinks = 1 [2025-09-24 15:33:35.336] fs.protected_symlinks = 1 [2025-09-24 15:33:35.336] kernel.modules_disabled = 1 [2025-09-24 15:33:35.527] [2025-09-24 15:33:35.527] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:33:36.938] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:33:44.632] SBL1:1210.0.1.0 [2025-09-24 15:33:44.680] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:33:46.246] SBL2:1210.0.1.0 [2025-09-24 15:33:46.294] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 15:33:46.405] j-A [2025-09-24 15:33:53.779] The R5 Autosar Classic is running [2025-09-24 15:33:53.779] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:33:53.779] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:33:54.387] INIT: version 2.96 booting [2025-09-24 15:33:54.499] INIT: Entering runlevel: 5 [2025-09-24 15:33:54.642] mtd24 attached [2025-09-24 15:33:54.659] mtd28 attached [2025-09-24 15:33:54.674] mtd32 attached [2025-09-24 15:33:54.706] ubi0:textures is mounted. [2025-09-24 15:33:54.723] RTNETLINK answers: File exists [2025-09-24 15:33:54.723] ubi1:animations is mounted. [2025-09-24 15:33:54.783] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:33:54.783] ubi2:dml_code is mounted. [2025-09-24 15:33:54.783] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:33:54.783] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:33:54.783] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:33:54.783] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:33:54.783] data.LB_FadeInType0=100 [2025-09-24 15:33:54.783] data.CHLH_FadeInType0=0 [2025-09-24 15:33:54.783] data.WU_FadeInDelay=0 [2025-09-24 15:33:54.783] max_time_out=0 [2025-09-24 15:33:54.783] No splash screen [2025-09-24 15:33:54.783] stop dss Done [2025-09-24 15:33:54.815] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:33:54.831] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:33:54.831] /dev/mem opened. [2025-09-24 15:33:54.863] Memory mapped at address 0xffffb4540000. [2025-09-24 15:33:54.863] Read at address 0x00600018 (0xffffb4540018): 0x00000000 [2025-09-24 15:33:54.863] Write at address 0x00600018 (0xffffb4540018): 0x00400040, readback 0x00400040 [2025-09-24 15:33:55.118] Loaded PowerVR consumer services. [2025-09-24 15:33:55.134] Waiting data available... [2025-09-24 15:33:55.166] 512+0 records in [2025-09-24 15:33:55.166] 512+0 records out [2025-09-24 15:33:55.199] Starting syslogd/klogd: done [2025-09-24 15:33:55.230] DML Start [2025-09-24 15:33:55.406] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:33:55.582] DML res1: 0 [2025-09-24 15:33:56.075] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:33:56.075] Read Success [2025-09-24 15:33:56.075] Verifying certificate... [2025-09-24 15:33:56.298] Verified OK [2025-09-24 15:33:56.315] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:33:58.016] Verified OK [2025-09-24 15:33:58.016] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:33:58.522] Verified OK [2025-09-24 15:33:58.522] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:34:01.000] fs.protected_hardlinks = 1 [2025-09-24 15:34:01.016] fs.protected_symlinks = 1 [2025-09-24 15:34:01.016] kernel.modules_disabled = 1 [2025-09-24 15:34:01.223] [2025-09-24 15:34:01.223] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:34:02.663] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:34:10.360] SBL1:1210.0.1.0 [2025-09-24 15:34:10.392] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:34:11.975] SBL2:1210.0.1.0 [2025-09-24 15:34:12.006] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:34:12.119] j-A [2025-09-24 15:34:19.493] The R5 Autosar Classic is running [2025-09-24 15:34:19.493] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:34:19.493] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:34:20.101] INIT: version 2.96 booting [2025-09-24 15:34:20.213] INIT: Entering runlevel: 5 [2025-09-24 15:34:20.372] mtd24 attached [2025-09-24 15:34:20.372] mtd28 attached [2025-09-24 15:34:20.388] mtd32 attached [2025-09-24 15:34:20.436] RTNETLINK answers: File exists [2025-09-24 15:34:20.436] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:34:20.479] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:34:20.479] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:34:20.479] ubi1:animations is mounted. [2025-09-24 15:34:20.479] ubi0:textures is mounted. [2025-09-24 15:34:20.479] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:34:20.479] ubi2:dml_code is mounted. [2025-09-24 15:34:20.479] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:34:20.505] data.LB_FadeInType0=100 [2025-09-24 15:34:20.505] data.CHLH_FadeInType0=0 [2025-09-24 15:34:20.505] data.WU_FadeInDelay=0 [2025-09-24 15:34:20.505] max_time_out=0 [2025-09-24 15:34:20.505] No splash screen [2025-09-24 15:34:20.505] stop dss Done [2025-09-24 15:34:20.521] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:34:20.537] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:34:20.587] /dev/mem opened. [2025-09-24 15:34:20.587] Memory mapped at address 0xffffbe6c1000. [2025-09-24 15:34:20.587] Read at address 0x00600018 (0xffffbe6c1018): 0x00000000 [2025-09-24 15:34:20.587] Write at address 0x00600018 (0xffffbe6c1018): 0x00400040, readback 0x00400040 [2025-09-24 15:34:20.827] Loaded PowerVR consumer services. [2025-09-24 15:34:20.875] Waiting data available... [2025-09-24 15:34:20.891] 512+0 records in [2025-09-24 15:34:20.907] 512+0 records out [2025-09-24 15:34:20.922] Starting syslogd/klogd: done [2025-09-24 15:34:20.938] DML Start [2025-09-24 15:34:21.130] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:34:21.370] DML res1: 0 [2025-09-24 15:34:21.734] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:34:21.734] Read Success [2025-09-24 15:34:21.734] Verifying certificate... [2025-09-24 15:34:21.973] Verified OK [2025-09-24 15:34:22.005] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:34:23.620] Verified OK [2025-09-24 15:34:23.620] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:34:24.317] Verified OK [2025-09-24 15:34:24.317] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:34:26.939] fs.protected_hardlinks = 1 [2025-09-24 15:34:26.967] fs.protected_symlinks = 1 [2025-09-24 15:34:26.967] kernel.modules_disabled = 1 [2025-09-24 15:34:27.159] [2025-09-24 15:34:27.159] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:34:28.405] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:34:36.060] SBL1:1210.0.1.0 [2025-09-24 15:34:36.107] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:34:37.674] SBL2:1210.0.1.0 [2025-09-24 15:34:37.721] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:34:37.834] j-A [2025-09-24 15:34:45.173] The R5 Autosar Classic is running [2025-09-24 15:34:45.198] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:34:45.198] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:34:45.805] INIT: version 2.96 booting [2025-09-24 15:34:45.917] INIT: Entering runlevel: 5 [2025-09-24 15:34:46.061] mtd24 attached [2025-09-24 15:34:46.077] mtd28 attached [2025-09-24 15:34:46.094] mtd32 attached [2025-09-24 15:34:46.110] ubi0:textures is mounted. [2025-09-24 15:34:46.141] RTNETLINK answers: File exists [2025-09-24 15:34:46.200] ubi2:dml_code is mounted. [2025-09-24 15:34:46.200] ubi1:animations is mounted. [2025-09-24 15:34:46.200] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:34:46.200] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:34:46.200] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:34:46.200] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:34:46.200] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:34:46.200] data.LB_FadeInType0=100 [2025-09-24 15:34:46.200] data.CHLH_FadeInType0=0 [2025-09-24 15:34:46.200] data.WU_FadeInDelay=0 [2025-09-24 15:34:46.200] max_time_out=0 [2025-09-24 15:34:46.200] No splash screen [2025-09-24 15:34:46.200] stop dss Done [2025-09-24 15:34:46.284] /dev/mem opened. [2025-09-24 15:34:46.284] Memory mapped at address 0xffffa2f46000. [2025-09-24 15:34:46.284] Read at address 0x00600018 (0xffffa2f46018): 0x00000000 [2025-09-24 15:34:46.284] Write at address 0x00600018 (0xffffa2f46018): 0x00400040, readback 0x00400040 [2025-09-24 15:34:46.284] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:34:46.300] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:34:46.396] Loaded PowerVR consumer services. [2025-09-24 15:34:46.556] Waiting data available... [2025-09-24 15:34:46.572] 512+0 records in [2025-09-24 15:34:46.572] 512+0 records out [2025-09-24 15:34:46.620] Starting syslogd/klogd: done [2025-09-24 15:34:46.636] DML Start [2025-09-24 15:34:46.811] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:34:47.035] DML res1: 0 [2025-09-24 15:34:47.466] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:34:47.466] Read Success [2025-09-24 15:34:47.466] Verifying certificate... [2025-09-24 15:34:47.690] Verified OK [2025-09-24 15:34:47.722] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:34:49.342] Verified OK [2025-09-24 15:34:49.342] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:34:49.933] Verified OK [2025-09-24 15:34:49.933] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:34:52.427] fs.protected_hardlinks = 1 [2025-09-24 15:34:52.443] fs.protected_symlinks = 1 [2025-09-24 15:34:52.443] kernel.modules_disabled = 1 [2025-09-24 15:34:52.635] [2025-09-24 15:34:52.635] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:34:54.146] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:35:01.780] SBL1:1210.0.1.0 [2025-09-24 15:35:01.812] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:35:03.395] SBL2:1210.0.1.0 [2025-09-24 15:35:03.426] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:35:03.539] j-A [2025-09-24 15:35:10.894] The R5 Autosar Classic is running [2025-09-24 15:35:10.894] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:35:10.915] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:35:11.522] INIT: version 2.96 booting [2025-09-24 15:35:11.634] INIT: Entering runlevel: 5 [2025-09-24 15:35:11.778] mtd24 attached [2025-09-24 15:35:11.794] mtd32 attached [2025-09-24 15:35:11.810] mtd28 attached [2025-09-24 15:35:11.842] ubi0:textures is mounted. [2025-09-24 15:35:11.897] RTNETLINK answers: File exists [2025-09-24 15:35:11.897] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:35:11.897] ubi2:animations is mounted. [2025-09-24 15:35:11.897] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:35:11.897] ubi1:dml_code is mounted. [2025-09-24 15:35:11.897] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:35:11.897] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:35:11.897] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:35:11.920] data.LB_FadeInType0=100 [2025-09-24 15:35:11.920] data.CHLH_FadeInType0=0 [2025-09-24 15:35:11.920] data.WU_FadeInDelay=0 [2025-09-24 15:35:11.920] max_time_out=0 [2025-09-24 15:35:11.920] No splash screen [2025-09-24 15:35:11.920] stop dss Done [2025-09-24 15:35:12.015] /dev/mem opened. [2025-09-24 15:35:12.015] Memory mapped at address 0xffff9b147000. [2025-09-24 15:35:12.015] Read at address 0x00600018 (0xffff9b147018): 0x00000000 [2025-09-24 15:35:12.015] Write at address 0x00600018 (0xffff9b147018): 0x00400040, readback 0x00400040 [2025-09-24 15:35:12.015] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:35:12.015] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:35:12.174] Loaded PowerVR consumer services. [2025-09-24 15:35:12.287] Waiting data available... [2025-09-24 15:35:12.319] 512+0 records in [2025-09-24 15:35:12.319] 512+0 records out [2025-09-24 15:35:12.351] Starting syslogd/klogd: done [2025-09-24 15:35:12.367] DML Start [2025-09-24 15:35:12.543] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:35:12.782] DML res1: 0 [2025-09-24 15:35:13.134] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:35:13.150] Read Success [2025-09-24 15:35:13.150] Verifying certificate... [2025-09-24 15:35:13.374] Verified OK [2025-09-24 15:35:13.390] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:35:15.099] Verified OK [2025-09-24 15:35:15.099] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:35:15.690] Verified OK [2025-09-24 15:35:15.690] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:35:18.409] fs.protected_hardlinks = 1 [2025-09-24 15:35:18.409] fs.protected_symlinks = 1 [2025-09-24 15:35:18.409] kernel.modules_disabled = 1 [2025-09-24 15:35:18.616] [2025-09-24 15:35:18.616] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:35:19.800] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:35:27.500] SBL1:1210.0.1.0 [2025-09-24 15:35:27.548] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:35:29.115] SBL2:1210.0.1.0 [2025-09-24 15:35:29.163] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:35:29.274] j-A [2025-09-24 15:35:36.646] The R5 Autosar Classic is running [2025-09-24 15:35:36.646] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:35:36.646] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:35:37.253] INIT: version 2.96 booting [2025-09-24 15:35:37.365] INIT: Entering runlevel: 5 [2025-09-24 15:35:37.524] mtd24 attached [2025-09-24 15:35:37.524] mtd32 attached [2025-09-24 15:35:37.540] mtd28 attached [2025-09-24 15:35:37.589] RTNETLINK answers: File exists [2025-09-24 15:35:37.589] ubi0:textures is mounted. [2025-09-24 15:35:37.647] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:35:37.647] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:35:37.647] ubi1:dml_code is mounted. [2025-09-24 15:35:37.647] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:35:37.647] ubi2:animations is mounted. [2025-09-24 15:35:37.647] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:35:37.647] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:35:37.647] data.LB_FadeInType0=100 [2025-09-24 15:35:37.647] data.CHLH_FadeInType0=0 [2025-09-24 15:35:37.647] data.WU_FadeInDelay=0 [2025-09-24 15:35:37.647] max_time_out=0 [2025-09-24 15:35:37.647] No splash screen [2025-09-24 15:35:37.647] stop dss Done [2025-09-24 15:35:37.695] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:35:37.727] /dev/mem opened. [2025-09-24 15:35:37.727] Memory mapped at address 0xffffaa684000. [2025-09-24 15:35:37.727] Read at address 0x00600018 (0xffffaa684018): 0x00000000 [2025-09-24 15:35:37.727] Write at address 0x00600018 (0xffffaa684018): 0x00400040, readback 0x00400040 [2025-09-24 15:35:37.727] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:35:37.855] Loaded PowerVR consumer services. [2025-09-24 15:35:37.999] Waiting data available... [2025-09-24 15:35:38.014] 512+0 records in [2025-09-24 15:35:38.014] 512+0 records out [2025-09-24 15:35:38.046] Starting syslogd/klogd: done [2025-09-24 15:35:38.062] DML Start [2025-09-24 15:35:38.239] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:35:38.414] DML res1: 0 [2025-09-24 15:35:38.933] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:35:38.933] Read Success [2025-09-24 15:35:38.933] Verifying certificate... [2025-09-24 15:35:39.156] Verified OK [2025-09-24 15:35:39.172] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:35:40.788] Verified OK [2025-09-24 15:35:40.809] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:35:41.415] Verified OK [2025-09-24 15:35:41.415] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:35:43.988] fs.protected_hardlinks = 1 [2025-09-24 15:35:43.988] fs.protected_symlinks = 1 [2025-09-24 15:35:43.988] kernel.modules_disabled = 1 [2025-09-24 15:35:44.180] [2025-09-24 15:35:44.180] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:35:45.484] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:35:53.237] SBL1:1210.0.1.0 [2025-09-24 15:35:53.269] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:35:54.853] SBL2:1210.0.1.0 [2025-09-24 15:35:54.901] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:35:54.996] j-A [2025-09-24 15:36:02.351] The R5 Autosar Classic is running [2025-09-24 15:36:02.373] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:36:02.373] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:36:02.980] INIT: version 2.96 booting [2025-09-24 15:36:03.093] INIT: Entering runlevel: 5 [2025-09-24 15:36:03.236] mtd28 attached [2025-09-24 15:36:03.252] mtd24 attached [2025-09-24 15:36:03.268] mtd32 attached [2025-09-24 15:36:03.316] RTNETLINK answers: File exists [2025-09-24 15:36:03.316] ubi0:animations is mounted. [2025-09-24 15:36:03.369] ubi1:textures is mounted. [2025-09-24 15:36:03.369] ubi2:dml_code is mounted. [2025-09-24 15:36:03.369] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:36:03.369] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:36:03.369] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:36:03.369] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:36:03.369] data.LB_FadeInType0=100 [2025-09-24 15:36:03.369] data.CHLH_FadeInType0=0 [2025-09-24 15:36:03.369] data.WU_FadeInDelay=0 [2025-09-24 15:36:03.369] max_time_out=0 [2025-09-24 15:36:03.369] No splash screen [2025-09-24 15:36:03.369] stop dss Done [2025-09-24 15:36:03.369] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:36:03.437] /dev/mem opened. [2025-09-24 15:36:03.437] Memory mapped at address 0xffffbcbc3000. [2025-09-24 15:36:03.437] Read at address 0x00600018 (0xffffbcbc3018): 0x00000000 [2025-09-24 15:36:03.437] Write at address 0x00600018 (0xffffbcbc3018): 0x00400040, readback 0x00400040 [2025-09-24 15:36:03.453] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:36:03.469] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:36:03.692] Loaded PowerVR consumer services. [2025-09-24 15:36:03.708] Waiting data available... [2025-09-24 15:36:03.757] 512+0 records in [2025-09-24 15:36:03.757] 512+0 records out [2025-09-24 15:36:03.773] Starting syslogd/klogd: done [2025-09-24 15:36:03.789] DML Start [2025-09-24 15:36:03.949] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:36:04.173] DML res1: 0 [2025-09-24 15:36:04.629] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:36:04.629] Read Success [2025-09-24 15:36:04.629] Verifying certificate... [2025-09-24 15:36:04.885] Verified OK [2025-09-24 15:36:04.901] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:36:06.452] Verified OK [2025-09-24 15:36:06.452] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:36:07.012] Verified OK [2025-09-24 15:36:07.012] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:36:09.667] fs.protected_hardlinks = 1 [2025-09-24 15:36:09.682] fs.protected_symlinks = 1 [2025-09-24 15:36:09.682] kernel.modules_disabled = 1 [2025-09-24 15:36:09.874] [2025-09-24 15:36:09.874] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:36:11.211] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:36:18.948] SBL1:1210.0.1.0 [2025-09-24 15:36:18.980] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:36:20.562] SBL2:1210.0.1.0 [2025-09-24 15:36:20.594] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:36:20.706] j-A [2025-09-24 15:36:28.060] The R5 Autosar Classic is running [2025-09-24 15:36:28.060] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:36:28.081] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:36:28.689] INIT: version 2.96 booting [2025-09-24 15:36:28.800] INIT: Entering runlevel: 5 [2025-09-24 15:36:28.960] mtd28 attached [2025-09-24 15:36:28.960] mtd32 attached [2025-09-24 15:36:28.976] mtd24 attached [2025-09-24 15:36:29.025] ubi0:animations is mounted. [2025-09-24 15:36:29.025] RTNETLINK answers: File exists [2025-09-24 15:36:29.068] ubi2:textures is mounted. [2025-09-24 15:36:29.068] ubi1:dml_code is mounted. [2025-09-24 15:36:29.068] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:36:29.068] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:36:29.068] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:36:29.068] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:36:29.068] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:36:29.089] data.LB_FadeInType0=100 [2025-09-24 15:36:29.089] data.CHLH_FadeInType0=0 [2025-09-24 15:36:29.089] data.WU_FadeInDelay=0 [2025-09-24 15:36:29.089] max_time_out=0 [2025-09-24 15:36:29.089] No splash screen [2025-09-24 15:36:29.089] stop dss Done [2025-09-24 15:36:29.121] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:36:29.137] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:36:29.153] /dev/mem opened. [2025-09-24 15:36:29.153] Memory mapped at address 0xffff83146000. [2025-09-24 15:36:29.179] Read at address 0x00600018 (0xffff83146018): 0x00000000 [2025-09-24 15:36:29.179] Write at address 0x00600018 (0xffff83146018): 0x00400040, readback 0x00400040 [2025-09-24 15:36:29.274] Loaded PowerVR consumer services. [2025-09-24 15:36:29.451] Waiting data available... [2025-09-24 15:36:29.467] 512+0 records in [2025-09-24 15:36:29.467] 512+0 records out [2025-09-24 15:36:29.514] Starting syslogd/klogd: done [2025-09-24 15:36:29.515] DML Start [2025-09-24 15:36:29.707] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:36:29.930] DML res1: 0 [2025-09-24 15:36:30.346] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:36:30.367] Read Success [2025-09-24 15:36:30.367] Verifying certificate... [2025-09-24 15:36:30.591] Verified OK [2025-09-24 15:36:30.607] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:36:32.205] Verified OK [2025-09-24 15:36:32.205] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:36:32.727] Verified OK [2025-09-24 15:36:32.727] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:36:35.510] fs.protected_hardlinks = 1 [2025-09-24 15:36:35.526] fs.protected_symlinks = 1 [2025-09-24 15:36:35.526] kernel.modules_disabled = 1 [2025-09-24 15:36:35.701] [2025-09-24 15:36:35.701] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:36:36.930] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:36:44.661] SBL1:1210.0.1.0 [2025-09-24 15:36:44.709] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:36:46.276] SBL2:1210.0.1.0 [2025-09-24 15:36:46.324] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:36:46.436] j-A [2025-09-24 15:36:53.774] The R5 Autosar Classic is running [2025-09-24 15:36:53.805] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:36:53.805] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:36:54.412] INIT: version 2.96 booting [2025-09-24 15:36:54.524] INIT: Entering runlevel: 5 [2025-09-24 15:36:54.667] mtd24 attached [2025-09-24 15:36:54.683] mtd28 attached [2025-09-24 15:36:54.699] mtd32 attached [2025-09-24 15:36:54.748] ubi0:textures is mounted. [2025-09-24 15:36:54.748] RTNETLINK answers: File exists [2025-09-24 15:36:54.804] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:36:54.804] ubi1:animations is mounted. [2025-09-24 15:36:54.804] ubi2:dml_code is mounted. [2025-09-24 15:36:54.804] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:36:54.804] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:36:54.804] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:36:54.804] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:36:54.804] data.LB_FadeInType0=100 [2025-09-24 15:36:54.804] data.CHLH_FadeInType0=0 [2025-09-24 15:36:54.804] data.WU_FadeInDelay=0 [2025-09-24 15:36:54.804] max_time_out=0 [2025-09-24 15:36:54.804] No splash screen [2025-09-24 15:36:54.804] stop dss Done [2025-09-24 15:36:54.836] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:36:54.873] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:36:54.873] /dev/mem opened. [2025-09-24 15:36:54.873] Memory mapped at address 0xffffaf161000. [2025-09-24 15:36:54.873] Read at address 0x00600018 (0xffffaf161018): 0x00000000 [2025-09-24 15:36:54.873] Write at address 0x00600018 (0xffffaf161018): 0x00400040, readback 0x00400040 [2025-09-24 15:36:54.985] Loaded PowerVR consumer services. [2025-09-24 15:36:55.144] Waiting data available... [2025-09-24 15:36:55.192] 512+0 records in [2025-09-24 15:36:55.192] 512+0 records out [2025-09-24 15:36:55.208] Starting syslogd/klogd: done [2025-09-24 15:36:55.224] DML Start [2025-09-24 15:36:55.369] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:36:55.577] DML res1: 0 [2025-09-24 15:36:56.093] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:36:56.093] Read Success [2025-09-24 15:36:56.093] Verifying certificate... [2025-09-24 15:36:56.349] Verified OK [2025-09-24 15:36:56.365] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:36:57.948] Verified OK [2025-09-24 15:36:57.948] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:36:58.522] Verified OK [2025-09-24 15:36:58.522] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:37:01.127] fs.protected_hardlinks = 1 [2025-09-24 15:37:01.127] fs.protected_symlinks = 1 [2025-09-24 15:37:01.143] kernel.modules_disabled = 1 [2025-09-24 15:37:01.336] [2025-09-24 15:37:01.336] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:37:02.662] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:37:10.392] SBL1:1210.0.1.0 [2025-09-24 15:37:10.440] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:37:12.007] SBL2:1210.0.1.0 [2025-09-24 15:37:12.055] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:37:12.150] j-A [2025-09-24 15:37:19.504] The R5 Autosar Classic is running [2025-09-24 15:37:19.529] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:37:19.529] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:37:20.137] INIT: version 2.96 booting [2025-09-24 15:37:20.248] INIT: Entering runlevel: 5 [2025-09-24 15:37:20.408] mtd24 attached [2025-09-24 15:37:20.408] mtd28 attached [2025-09-24 15:37:20.424] mtd32 attached [2025-09-24 15:37:20.472] RTNETLINK answers: File exists [2025-09-24 15:37:20.472] ubi0:textures is mounted. [2025-09-24 15:37:20.520] ubi1:animations is mounted. [2025-09-24 15:37:20.520] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:37:20.520] ubi2:dml_code is mounted. [2025-09-24 15:37:20.520] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:37:20.520] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:37:20.520] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:37:20.520] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:37:20.542] data.LB_FadeInType0=100 [2025-09-24 15:37:20.542] data.CHLH_FadeInType0=0 [2025-09-24 15:37:20.542] data.WU_FadeInDelay=0 [2025-09-24 15:37:20.542] max_time_out=0 [2025-09-24 15:37:20.542] No splash screen [2025-09-24 15:37:20.542] stop dss Done [2025-09-24 15:37:20.588] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:37:20.588] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:37:20.624] /dev/mem opened. [2025-09-24 15:37:20.624] Memory mapped at address 0xffffac81c000. [2025-09-24 15:37:20.624] Read at address 0x00600018 (0xffffac81c018): 0x00000000 [2025-09-24 15:37:20.624] Write at address 0x00600018 (0xffffac81c018): 0x00400040, readback 0x00400040 [2025-09-24 15:37:20.890] Loaded PowerVR consumer services. [2025-09-24 15:37:20.890] Waiting data available... [2025-09-24 15:37:20.905] 512+0 records in [2025-09-24 15:37:20.905] 512+0 records out [2025-09-24 15:37:20.953] Starting syslogd/klogd: done [2025-09-24 15:37:20.969] DML Start [2025-09-24 15:37:21.145] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:37:21.352] DML res1: 0 [2025-09-24 15:37:21.774] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:37:21.774] Read Success [2025-09-24 15:37:21.774] Verifying certificate... [2025-09-24 15:37:21.982] Verified OK [2025-09-24 15:37:21.998] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:37:23.594] Verified OK [2025-09-24 15:37:23.594] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:37:24.246] Verified OK [2025-09-24 15:37:24.246] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:37:26.930] fs.protected_hardlinks = 1 [2025-09-24 15:37:26.930] fs.protected_symlinks = 1 [2025-09-24 15:37:26.930] kernel.modules_disabled = 1 [2025-09-24 15:37:27.121] [2025-09-24 15:37:27.121] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:37:28.400] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:37:36.128] SBL1:1210.0.1.0 [2025-09-24 15:37:36.160] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:37:37.743] SBL2:1210.0.1.0 [2025-09-24 15:37:37.775] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:37:37.887] j-A [2025-09-24 15:37:45.241] The R5 Autosar Classic is running [2025-09-24 15:37:45.241] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:37:45.262] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:37:45.870] INIT: version 2.96 booting [2025-09-24 15:37:45.981] INIT: Entering runlevel: 5 [2025-09-24 15:37:46.126] mtd24 attached [2025-09-24 15:37:46.142] mtd28 attached [2025-09-24 15:37:46.158] mtd32 attached [2025-09-24 15:37:46.205] ubi0:textures is mounted. [2025-09-24 15:37:46.205] RTNETLINK answers: File exists [2025-09-24 15:37:46.261] ubi1:animations is mounted. [2025-09-24 15:37:46.261] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:37:46.261] ubi2:dml_code is mounted. [2025-09-24 15:37:46.261] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:37:46.261] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:37:46.261] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:37:46.261] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:37:46.261] data.LB_FadeInType0=100 [2025-09-24 15:37:46.261] data.CHLH_FadeInType0=0 [2025-09-24 15:37:46.261] data.WU_FadeInDelay=0 [2025-09-24 15:37:46.261] max_time_out=0 [2025-09-24 15:37:46.261] No splash screen [2025-09-24 15:37:46.261] stop dss Done [2025-09-24 15:37:46.333] /dev/mem opened. [2025-09-24 15:37:46.333] Memory mapped at address 0xffffa302e000. [2025-09-24 15:37:46.333] Read at address 0x00600018 (0xffffa302e018): 0x00000000 [2025-09-24 15:37:46.333] Write at address 0x00600018 (0xffffa302e018): 0x00400040, readback 0x00400040 [2025-09-24 15:37:46.333] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:37:46.349] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:37:46.509] Loaded PowerVR consumer services. [2025-09-24 15:37:46.637] Waiting data available... [2025-09-24 15:37:46.653] 512+0 records in [2025-09-24 15:37:46.653] 512+0 records out [2025-09-24 15:37:46.685] Starting syslogd/klogd: done [2025-09-24 15:37:46.701] DML Start [2025-09-24 15:37:46.925] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:37:47.132] DML res1: 0 [2025-09-24 15:37:47.528] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:37:47.528] Read Success [2025-09-24 15:37:47.528] Verifying certificate... [2025-09-24 15:37:47.799] Verified OK [2025-09-24 15:37:47.815] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:37:49.374] Verified OK [2025-09-24 15:37:49.374] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:37:50.027] Verified OK [2025-09-24 15:37:50.027] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:37:52.697] fs.protected_hardlinks = 1 [2025-09-24 15:37:52.697] fs.protected_symlinks = 1 [2025-09-24 15:37:52.697] kernel.modules_disabled = 1 [2025-09-24 15:37:52.872] [2025-09-24 15:37:52.872] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:37:54.179] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:38:01.845] SBL1:1210.0.1.0 [2025-09-24 15:38:01.893] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:38:03.460] SBL2:1210.0.1.0 [2025-09-24 15:38:03.507] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:38:03.619] j-A [2025-09-24 15:38:10.989] The R5 Autosar Classic is running [2025-09-24 15:38:10.989] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:38:10.989] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:38:11.597] INIT: version 2.96 booting [2025-09-24 15:38:11.708] INIT: Entering runlevel: 5 [2025-09-24 15:38:11.869] mtd28 attached [2025-09-24 15:38:11.869] mtd24 attached [2025-09-24 15:38:11.884] mtd32 attached [2025-09-24 15:38:11.932] RTNETLINK answers: File exists [2025-09-24 15:38:11.976] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:38:11.976] ubi0:animations is mounted. [2025-09-24 15:38:11.976] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:38:11.976] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:38:11.976] ubi1:textures is mounted. [2025-09-24 15:38:11.976] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:38:11.976] ubi2:dml_code is mounted. [2025-09-24 15:38:11.976] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:38:11.976] data.LB_FadeInType0=100 [2025-09-24 15:38:11.997] data.CHLH_FadeInType0=0 [2025-09-24 15:38:11.997] data.WU_FadeInDelay=0 [2025-09-24 15:38:11.997] max_time_out=0 [2025-09-24 15:38:11.997] No splash screen [2025-09-24 15:38:11.997] stop dss Done [2025-09-24 15:38:12.068] /dev/mem opened. [2025-09-24 15:38:12.068] Memory mapped at address 0xffff83604000. [2025-09-24 15:38:12.068] Read at address 0x00600018 (0xffff83604018): 0x00000000 [2025-09-24 15:38:12.068] Write at address 0x00600018 (0xffff83604018): 0x00400040, readback 0x00400040 [2025-09-24 15:38:12.068] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:38:12.068] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:38:12.164] Loaded PowerVR consumer services. [2025-09-24 15:38:12.340] Waiting data available... [2025-09-24 15:38:12.372] 512+0 records in [2025-09-24 15:38:12.388] 512+0 records out [2025-09-24 15:38:12.404] Starting syslogd/klogd: done [2025-09-24 15:38:12.420] DML Start [2025-09-24 15:38:12.596] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:38:12.851] DML res1: 0 [2025-09-24 15:38:13.187] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:38:13.208] Read Success [2025-09-24 15:38:13.208] Verifying certificate... [2025-09-24 15:38:13.512] Verified OK [2025-09-24 15:38:13.528] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:38:15.199] Verified OK [2025-09-24 15:38:15.199] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:38:15.863] Verified OK [2025-09-24 15:38:15.863] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:38:18.501] fs.protected_hardlinks = 1 [2025-09-24 15:38:18.517] fs.protected_symlinks = 1 [2025-09-24 15:38:18.532] kernel.modules_disabled = 1 [2025-09-24 15:38:18.725] [2025-09-24 15:38:18.725] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:38:19.912] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:38:27.559] SBL1:1210.0.1.0 [2025-09-24 15:38:27.607] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:38:29.175] SBL2:1210.0.1.0 [2025-09-24 15:38:29.223] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:38:29.335] j-A [2025-09-24 15:38:36.708] The R5 Autosar Classic is running [2025-09-24 15:38:36.708] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:38:36.708] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:38:37.316] INIT: version 2.96 booting [2025-09-24 15:38:37.427] INIT: Entering runlevel: 5 [2025-09-24 15:38:37.587] mtd28 attached [2025-09-24 15:38:37.603] mtd24 attached [2025-09-24 15:38:37.619] mtd32 attached [2025-09-24 15:38:37.651] ubi0:animations is mounted. [2025-09-24 15:38:37.716] ubi1:textures is mounted. [2025-09-24 15:38:37.716] RTNETLINK answers: File exists [2025-09-24 15:38:37.716] ubi2:dml_code is mounted. [2025-09-24 15:38:37.716] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:38:37.716] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:38:37.716] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:38:37.716] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:38:37.716] data.LB_FadeInType0=100 [2025-09-24 15:38:37.716] data.CHLH_FadeInType0=0 [2025-09-24 15:38:37.716] data.WU_FadeInDelay=0 [2025-09-24 15:38:37.716] max_time_out=0 [2025-09-24 15:38:37.716] No splash screen [2025-09-24 15:38:37.716] stop dss Done [2025-09-24 15:38:37.716] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:38:37.748] /dev/mem opened. [2025-09-24 15:38:37.774] Memory mapped at address 0xffffbb666000. [2025-09-24 15:38:37.774] Read at address 0x00600018 (0xffffbb666018): 0x00000000 [2025-09-24 15:38:37.774] Write at address 0x00600018 (0xffffbb666018): 0x00400040, readback 0x00400040 [2025-09-24 15:38:37.818] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:38:37.818] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:38:37.978] Loaded PowerVR consumer services. [2025-09-24 15:38:38.074] Waiting data available... [2025-09-24 15:38:38.106] 512+0 records in [2025-09-24 15:38:38.106] 512+0 records out [2025-09-24 15:38:38.154] Starting syslogd/klogd: done [2025-09-24 15:38:38.169] DML Start [2025-09-24 15:38:38.362] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:38:38.570] DML res1: 0 [2025-09-24 15:38:39.017] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:38:39.039] Read Success [2025-09-24 15:38:39.039] Verifying certificate... [2025-09-24 15:38:39.277] Verified OK [2025-09-24 15:38:39.310] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:38:41.127] Verified OK [2025-09-24 15:38:41.127] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:38:41.590] Verified OK [2025-09-24 15:38:41.606] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:38:44.052] fs.protected_hardlinks = 1 [2025-09-24 15:38:44.052] fs.protected_symlinks = 1 [2025-09-24 15:38:44.068] kernel.modules_disabled = 1 [2025-09-24 15:38:44.259] [2025-09-24 15:38:44.259] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:38:45.587] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:38:53.281] SBL1:1210.0.1.0 [2025-09-24 15:38:53.329] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:38:54.912] SBL2:1210.0.1.0 [2025-09-24 15:38:54.943] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:38:55.055] j-A [2025-09-24 15:39:02.431] The R5 Autosar Classic is running [2025-09-24 15:39:02.431] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:39:02.431] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:39:03.038] INIT: version 2.96 booting [2025-09-24 15:39:03.150] INIT: Entering runlevel: 5 [2025-09-24 15:39:03.310] mtd32 attached [2025-09-24 15:39:03.325] mtd28 attached [2025-09-24 15:39:03.325] mtd24 attached [2025-09-24 15:39:03.373] RTNETLINK answers: File exists [2025-09-24 15:39:03.373] ubi0:dml_code is mounted. [2025-09-24 15:39:03.429] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:39:03.429] ubi1:animations is mounted. [2025-09-24 15:39:03.429] ubi2:textures is mounted. [2025-09-24 15:39:03.429] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:39:03.429] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:39:03.429] data.LB_FadeInType0=100 [2025-09-24 15:39:03.429] data.CHLH_FadeInType0=0 [2025-09-24 15:39:03.429] data.WU_FadeInDelay=0 [2025-09-24 15:39:03.429] max_time_out=0 [2025-09-24 15:39:03.429] No splash screen [2025-09-24 15:39:03.429] stop dss Done [2025-09-24 15:39:03.429] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:39:03.429] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:39:03.498] /dev/mem opened. [2025-09-24 15:39:03.498] Memory mapped at address 0xffff92136000. [2025-09-24 15:39:03.498] Read at address 0x00600018 (0xffff92136018): 0x00000000 [2025-09-24 15:39:03.498] Write at address 0x00600018 (0xffff92136018): 0x00400040, readback 0x00400040 [2025-09-24 15:39:03.498] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:39:03.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:39:03.594] Loaded PowerVR consumer services. [2025-09-24 15:39:03.770] Waiting data available... [2025-09-24 15:39:03.801] 512+0 records in [2025-09-24 15:39:03.801] 512+0 records out [2025-09-24 15:39:03.849] Starting syslogd/klogd: done [2025-09-24 15:39:03.865] DML Start [2025-09-24 15:39:04.009] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:39:04.265] DML res1: 0 [2025-09-24 15:39:04.681] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:39:04.701] Read Success [2025-09-24 15:39:04.701] Verifying certificate... [2025-09-24 15:39:04.942] Verified OK [2025-09-24 15:39:04.958] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:39:06.621] Verified OK [2025-09-24 15:39:06.621] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:39:07.241] Verified OK [2025-09-24 15:39:07.241] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:39:09.799] fs.protected_hardlinks = 1 [2025-09-24 15:39:09.799] fs.protected_symlinks = 1 [2025-09-24 15:39:09.799] kernel.modules_disabled = 1 [2025-09-24 15:39:09.974] [2025-09-24 15:39:09.974] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:39:11.288] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:39:19.013] SBL1:1210.0.1.0 [2025-09-24 15:39:19.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:39:20.627] SBL2:1210.0.1.0 [2025-09-24 15:39:20.675] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:39:20.771] j-A [2025-09-24 15:39:28.126] The R5 Autosar Classic is running [2025-09-24 15:39:28.149] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:39:28.149] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:39:28.756] INIT: version 2.96 booting [2025-09-24 15:39:28.869] INIT: Entering runlevel: 5 [2025-09-24 15:39:29.029] mtd24 attached [2025-09-24 15:39:29.029] mtd28 attached [2025-09-24 15:39:29.045] mtd32 attached [2025-09-24 15:39:29.093] ubi1:animations is mounted. [2025-09-24 15:39:29.093] RTNETLINK answers: File exists [2025-09-24 15:39:29.109] ubi2:dml_code is mounted. [2025-09-24 15:39:29.163] ubi0:textures is mounted. [2025-09-24 15:39:29.163] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:39:29.163] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:39:29.163] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:39:29.163] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:39:29.163] data.LB_FadeInType0=100 [2025-09-24 15:39:29.163] data.CHLH_FadeInType0=0 [2025-09-24 15:39:29.163] data.WU_FadeInDelay=0 [2025-09-24 15:39:29.163] max_time_out=0 [2025-09-24 15:39:29.163] No splash screen [2025-09-24 15:39:29.163] stop dss Done [2025-09-24 15:39:29.163] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:39:29.247] /dev/mem opened. [2025-09-24 15:39:29.247] Memory mapped at address 0xffffa678d000. [2025-09-24 15:39:29.247] Read at address 0x00600018 (0xffffa678d018): 0x00000000 [2025-09-24 15:39:29.247] Write at address 0x00600018 (0xffffa678d018): 0x00400040, readback 0x00400040 [2025-09-24 15:39:29.247] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:39:29.247] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:39:29.343] Loaded PowerVR consumer services. [2025-09-24 15:39:29.520] Waiting data available... [2025-09-24 15:39:29.535] 512+0 records in [2025-09-24 15:39:29.535] 512+0 records out [2025-09-24 15:39:29.567] Starting syslogd/klogd: done [2025-09-24 15:39:29.583] DML Start [2025-09-24 15:39:29.759] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:39:29.951] DML res1: 0 [2025-09-24 15:39:30.429] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:39:30.429] Read Success [2025-09-24 15:39:30.429] Verifying certificate... [2025-09-24 15:39:30.669] Verified OK [2025-09-24 15:39:30.684] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:39:32.266] Verified OK [2025-09-24 15:39:32.266] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:39:32.910] Verified OK [2025-09-24 15:39:32.910] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:39:35.565] fs.protected_hardlinks = 1 [2025-09-24 15:39:35.565] fs.protected_symlinks = 1 [2025-09-24 15:39:35.580] kernel.modules_disabled = 1 [2025-09-24 15:39:35.788] [2025-09-24 15:39:35.788] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:39:37.009] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:39:44.743] SBL1:1210.0.1.0 [2025-09-24 15:39:44.775] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:39:46.357] SBL2:1210.0.1.0 [2025-09-24 15:39:46.405] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:39:46.501] j-A [2025-09-24 15:39:53.856] The R5 Autosar Classic is running [2025-09-24 15:39:53.878] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:39:53.878] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:39:54.486] INIT: version 2.96 booting [2025-09-24 15:39:54.598] INIT: Entering runlevel: 5 [2025-09-24 15:39:54.757] mtd24 attached [2025-09-24 15:39:54.757] mtd28 attached [2025-09-24 15:39:54.774] mtd32 attached [2025-09-24 15:39:54.822] ubi0:textures is mounted. [2025-09-24 15:39:54.838] RTNETLINK answers: File exists [2025-09-24 15:39:54.838] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:39:54.891] ubi1:animations is mounted. [2025-09-24 15:39:54.891] ubi2:dml_code is mounted. [2025-09-24 15:39:54.891] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:39:54.891] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:39:54.891] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:39:54.891] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:39:54.891] data.LB_FadeInType0=100 [2025-09-24 15:39:54.891] data.CHLH_FadeInType0=0 [2025-09-24 15:39:54.891] data.WU_FadeInDelay=0 [2025-09-24 15:39:54.891] max_time_out=0 [2025-09-24 15:39:54.891] No splash screen [2025-09-24 15:39:54.891] stop dss Done [2025-09-24 15:39:54.923] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:39:54.923] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:39:54.955] /dev/mem opened. [2025-09-24 15:39:54.955] Memory mapped at address 0xffffa8831000. [2025-09-24 15:39:54.955] Read at address 0x00600018 (0xffffa8831018): 0x00000000 [2025-09-24 15:39:54.955] Write at address 0x00600018 (0xffffa8831018): 0x00400040, readback 0x00400040 [2025-09-24 15:39:55.098] Loaded PowerVR consumer services. [2025-09-24 15:39:55.242] Waiting data available... [2025-09-24 15:39:55.290] 512+0 records in [2025-09-24 15:39:55.290] 512+0 records out [2025-09-24 15:39:55.322] Starting syslogd/klogd: done [2025-09-24 15:39:55.338] DML Start [2025-09-24 15:39:55.514] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:39:55.754] DML res1: 0 [2025-09-24 15:39:56.168] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:39:56.168] Read Success [2025-09-24 15:39:56.168] Verifying certificate... [2025-09-24 15:39:56.424] Verified OK [2025-09-24 15:39:56.440] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:39:58.093] Verified OK [2025-09-24 15:39:58.093] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:39:58.677] Verified OK [2025-09-24 15:39:58.677] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:39:59.444] 5489 GC [0] [2025-09-24 15:39:59.523] 5562 GC [1] [2025-09-24 15:39:59.604] 5639 GC [2] [2025-09-24 15:39:59.668] 5712 GC [3] [2025-09-24 15:39:59.732] 5773 GC [4] [2025-09-24 15:39:59.812] 5851 GC [5] [2025-09-24 15:39:59.875] 5913 GC [6] [2025-09-24 15:39:59.955] 5990 GC [7] [2025-09-24 15:40:00.035] 6062 GC [8] [2025-09-24 15:40:00.100] 6131 GC [9] [2025-09-24 15:40:00.163] 6203 GC [10] [2025-09-24 15:40:00.243] 6270 GC [11] [2025-09-24 15:40:00.291] 6339 GC [12] [2025-09-24 15:40:00.355] 6391 GC [13] [2025-09-24 15:40:00.419] 6453 GC [14] [2025-09-24 15:40:00.467] 6512 GC [15] [2025-09-24 15:40:00.532] 6573 GC [16] [2025-09-24 15:40:00.595] 6631 GC [17] [2025-09-24 15:40:00.659] 6692 GC [18] [2025-09-24 15:40:00.707] 6750 GC [19] [2025-09-24 15:40:00.787] 6822 GC [20] [2025-09-24 15:40:00.851] 6883 GC [21] [2025-09-24 15:40:00.898] 6941 GC [22] [2025-09-24 15:40:00.963] 7009 GC [23] [2025-09-24 15:40:01.027] 7060 GC [24] [2025-09-24 15:40:01.091] 7123 GC [25] [2025-09-24 15:40:01.155] 7189 GC [26] [2025-09-24 15:40:01.218] 7253 GC [27] [2025-09-24 15:40:01.283] 7312 GC [28] [2025-09-24 15:40:01.283] 7322 GC [29] [2025-09-24 15:40:01.346] GC DONE [2025-09-24 15:40:01.394] fs.protected_hardlinks = 1 [2025-09-24 15:40:01.394] fs.protected_symlinks = 1 [2025-09-24 15:40:01.410] kernel.modules_disabled = 1 [2025-09-24 15:40:01.602] [2025-09-24 15:40:01.602] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:40:02.748] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:40:10.448] SBL1:1210.0.1.0 [2025-09-24 15:40:10.497] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:40:12.063] SBL2:1210.0.1.0 [2025-09-24 15:40:12.095] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:40:12.206] j-A [2025-09-24 15:40:19.578] The R5 Autosar Classic is running [2025-09-24 15:40:19.578] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:40:19.578] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:40:20.185] INIT: version 2.96 booting [2025-09-24 15:40:20.297] INIT: Entering runlevel: 5 [2025-09-24 15:40:20.442] mtd24 attached [2025-09-24 15:40:20.458] mtd28 attached [2025-09-24 15:40:20.474] mtd32 attached [2025-09-24 15:40:20.506] ubi0:textures is mounted. [2025-09-24 15:40:20.522] RTNETLINK answers: File exists [2025-09-24 15:40:20.583] ubi1:animations is mounted. [2025-09-24 15:40:20.583] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:40:20.583] ubi2:dml_code is mounted. [2025-09-24 15:40:20.583] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:40:20.583] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:40:20.583] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:40:20.583] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:40:20.583] data.LB_FadeInType0=100 [2025-09-24 15:40:20.583] data.CHLH_FadeInType0=0 [2025-09-24 15:40:20.583] data.WU_FadeInDelay=0 [2025-09-24 15:40:20.583] max_time_out=0 [2025-09-24 15:40:20.583] No splash screen [2025-09-24 15:40:20.583] stop dss Done [2025-09-24 15:40:20.630] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:40:20.665] /dev/mem opened. [2025-09-24 15:40:20.665] Memory mapped at address 0xffff8bd86000. [2025-09-24 15:40:20.665] Read at address 0x00600018 (0xffff8bd86018): 0x00000000 [2025-09-24 15:40:20.665] Write at address 0x00600018 (0xffff8bd86018): 0x00400040, readback 0x00400040 [2025-09-24 15:40:20.665] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:40:20.793] Loaded PowerVR consumer services. [2025-09-24 15:40:20.857] 512+0 records in [2025-09-24 15:40:20.857] 512+0 records out [2025-09-24 15:40:20.873] Starting syslogd/klogd: done [2025-09-24 15:40:20.969] Waiting data available... [2025-09-24 15:40:20.969] DML Start [2025-09-24 15:40:21.161] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:40:21.400] DML res1: 0 [2025-09-24 15:40:21.749] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:40:21.749] Read Success [2025-09-24 15:40:21.749] Verifying certificate... [2025-09-24 15:40:21.958] Verified OK [2025-09-24 15:40:21.974] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:40:23.588] Verified OK [2025-09-24 15:40:23.588] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:40:24.260] Verified OK [2025-09-24 15:40:24.260] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:40:27.010] fs.protected_hardlinks = 1 [2025-09-24 15:40:27.010] fs.protected_symlinks = 1 [2025-09-24 15:40:27.025] kernel.modules_disabled = 1 [2025-09-24 15:40:27.202] [2025-09-24 15:40:27.202] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:40:28.448] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:40:36.169] SBL1:1210.0.1.0 [2025-09-24 15:40:36.217] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:40:37.784] SBL2:1210.0.1.0 [2025-09-24 15:40:37.832] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:40:37.927] j-A [2025-09-24 15:40:45.283] The R5 Autosar Classic is running [2025-09-24 15:40:45.283] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:40:45.304] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:40:45.912] INIT: version 2.96 booting [2025-09-24 15:40:46.024] INIT: Entering runlevel: 5 [2025-09-24 15:40:46.183] mtd24 attached [2025-09-24 15:40:46.183] mtd28 attached [2025-09-24 15:40:46.215] mtd32 attached [2025-09-24 15:40:46.231] ubi0:textures is mounted. [2025-09-24 15:40:46.247] ubi1:animations is mounted. [2025-09-24 15:40:46.247] RTNETLINK answers: File exists [2025-09-24 15:40:46.305] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:40:46.305] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:40:46.305] ubi2:dml_code is mounted. [2025-09-24 15:40:46.305] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:40:46.305] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:40:46.305] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:40:46.305] data.LB_FadeInType0=100 [2025-09-24 15:40:46.305] data.CHLH_FadeInType0=0 [2025-09-24 15:40:46.305] data.WU_FadeInDelay=0 [2025-09-24 15:40:46.305] max_time_out=0 [2025-09-24 15:40:46.305] No splash screen [2025-09-24 15:40:46.305] stop dss Done [2025-09-24 15:40:46.385] /dev/mem opened. [2025-09-24 15:40:46.385] Memory mapped at address 0xffff984de000. [2025-09-24 15:40:46.385] Read at address 0x00600018 (0xffff984de018): 0x00000000 [2025-09-24 15:40:46.385] Write at address 0x00600018 (0xffff984de018): 0x00400040, readback 0x00400040 [2025-09-24 15:40:46.385] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:40:46.401] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:40:46.578] Loaded PowerVR consumer services. [2025-09-24 15:40:46.578] 512+0 records in [2025-09-24 15:40:46.593] 512+0 records out [2025-09-24 15:40:46.641] Starting syslogd/klogd: done [2025-09-24 15:40:46.689] Waiting data available... [2025-09-24 15:40:46.689] DML Start [2025-09-24 15:40:46.913] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:40:47.121] DML res1: 0 [2025-09-24 15:40:47.517] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:40:47.517] Read Success [2025-09-24 15:40:47.517] Verifying certificate... [2025-09-24 15:40:47.740] Verified OK [2025-09-24 15:40:47.756] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:40:49.465] Verified OK [2025-09-24 15:40:49.465] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:40:50.050] Verified OK [2025-09-24 15:40:50.050] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:40:52.545] fs.protected_hardlinks = 1 [2025-09-24 15:40:52.560] fs.protected_symlinks = 1 [2025-09-24 15:40:52.560] kernel.modules_disabled = 1 [2025-09-24 15:40:52.752] [2025-09-24 15:40:52.752] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:40:54.143] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:41:01.874] SBL1:1210.0.1.0 [2025-09-24 15:41:01.922] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:41:03.489] SBL2:1210.0.1.0 [2025-09-24 15:41:03.536] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:41:03.632] j-A [2025-09-24 15:41:10.988] The R5 Autosar Classic is running [2025-09-24 15:41:10.988] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:41:11.009] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:41:11.616] INIT: version 2.96 booting [2025-09-24 15:41:11.712] INIT: Entering runlevel: 5 [2025-09-24 15:41:11.872] mtd24 attached [2025-09-24 15:41:11.887] mtd28 attached [2025-09-24 15:41:11.904] mtd32 attached [2025-09-24 15:41:11.919] ubi0:textures is mounted. [2025-09-24 15:41:12.004] RTNETLINK answers: File exists [2025-09-24 15:41:12.004] ubi1:animations is mounted. [2025-09-24 15:41:12.004] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:41:12.004] ubi2:dml_code is mounted. [2025-09-24 15:41:12.004] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:41:12.004] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:41:12.004] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:41:12.004] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:41:12.004] data.LB_FadeInType0=100 [2025-09-24 15:41:12.004] data.CHLH_FadeInType0=0 [2025-09-24 15:41:12.004] data.WU_FadeInDelay=0 [2025-09-24 15:41:12.004] max_time_out=0 [2025-09-24 15:41:12.004] No splash screen [2025-09-24 15:41:12.004] stop dss Done [2025-09-24 15:41:12.035] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:41:12.035] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:41:12.077] /dev/mem opened. [2025-09-24 15:41:12.077] Memory mapped at address 0xffffbc12b000. [2025-09-24 15:41:12.077] Read at address 0x00600018 (0xffffbc12b018): 0x00000000 [2025-09-24 15:41:12.077] Write at address 0x00600018 (0xffffbc12b018): 0x00400040, readback 0x00400040 [2025-09-24 15:41:12.237] Loaded PowerVR consumer services. [2025-09-24 15:41:12.285] 512+0 records in [2025-09-24 15:41:12.285] 512+0 records out [2025-09-24 15:41:12.317] Waiting data available... [2025-09-24 15:41:12.333] Starting syslogd/klogd: done [2025-09-24 15:41:12.349] DML Start [2025-09-24 15:41:12.540] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:41:12.764] DML res1: 0 [2025-09-24 15:41:13.164] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:41:13.164] Read Success [2025-09-24 15:41:13.180] Verifying certificate... [2025-09-24 15:41:13.436] Verified OK [2025-09-24 15:41:13.436] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:41:15.099] Verified OK [2025-09-24 15:41:15.099] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:41:15.787] Verified OK [2025-09-24 15:41:15.787] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:41:18.345] fs.protected_hardlinks = 1 [2025-09-24 15:41:18.345] fs.protected_symlinks = 1 [2025-09-24 15:41:18.360] kernel.modules_disabled = 1 [2025-09-24 15:41:18.553] [2025-09-24 15:41:18.553] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:41:19.856] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:41:27.576] SBL1:1210.0.1.0 [2025-09-24 15:41:27.624] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:41:29.190] SBL2:1210.0.1.0 [2025-09-24 15:41:29.238] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:41:29.335] j-A [2025-09-24 15:41:36.690] The R5 Autosar Classic is running [2025-09-24 15:41:36.713] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:41:36.713] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:41:37.320] INIT: version 2.96 booting [2025-09-24 15:41:37.432] INIT: Entering runlevel: 5 [2025-09-24 15:41:37.591] mtd32 attached [2025-09-24 15:41:37.607] mtd28 attached [2025-09-24 15:41:37.607] mtd24 attached [2025-09-24 15:41:37.656] ubi0:dml_code is mounted. [2025-09-24 15:41:37.656] RTNETLINK answers: File exists [2025-09-24 15:41:37.699] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:41:37.699] ubi1:animations is mounted. [2025-09-24 15:41:37.699] ubi2:textures is mounted. [2025-09-24 15:41:37.699] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:41:37.699] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:41:37.699] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:41:37.699] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:41:37.723] data.LB_FadeInType0=100 [2025-09-24 15:41:37.723] data.CHLH_FadeInType0=0 [2025-09-24 15:41:37.723] data.WU_FadeInDelay=0 [2025-09-24 15:41:37.723] max_time_out=0 [2025-09-24 15:41:37.723] No splash screen [2025-09-24 15:41:37.723] stop dss Done [2025-09-24 15:41:37.771] /dev/mem opened. [2025-09-24 15:41:37.771] Memory mapped at address 0xffffb2a18000. [2025-09-24 15:41:37.797] Read at address 0x00600018 (0xffffb2a18018): 0x00000000 [2025-09-24 15:41:37.797] Write at address 0x00600018 (0xffffb2a18018): 0x00400040, readback 0x00400040 [2025-09-24 15:41:37.797] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:41:37.813] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:41:37.908] Loaded PowerVR consumer services. [2025-09-24 15:41:38.004] 512+0 records in [2025-09-24 15:41:38.004] 512+0 records out [2025-09-24 15:41:38.052] Starting syslogd/klogd: done [2025-09-24 15:41:38.068] Waiting data available... [2025-09-24 15:41:38.084] DML Start [2025-09-24 15:41:38.260] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:41:38.484] DML res1: 0 [2025-09-24 15:41:38.921] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:41:38.921] Read Success [2025-09-24 15:41:38.921] Verifying certificate... [2025-09-24 15:41:39.209] Verified OK [2025-09-24 15:41:39.225] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:41:40.909] Verified OK [2025-09-24 15:41:40.909] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:41:41.544] Verified OK [2025-09-24 15:41:41.544] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:41:44.135] fs.protected_hardlinks = 1 [2025-09-24 15:41:44.135] fs.protected_symlinks = 1 [2025-09-24 15:41:44.151] kernel.modules_disabled = 1 [2025-09-24 15:41:44.326] [2025-09-24 15:41:44.326] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:41:45.578] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:41:53.299] SBL1:1210.0.1.0 [2025-09-24 15:41:53.347] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:41:54.913] SBL2:1210.0.1.0 [2025-09-24 15:41:54.945] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:41:55.058] j-A [2025-09-24 15:42:02.429] The R5 Autosar Classic is running [2025-09-24 15:42:02.429] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:42:02.429] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:42:03.037] INIT: version 2.96 booting [2025-09-24 15:42:03.148] INIT: Entering runlevel: 5 [2025-09-24 15:42:03.309] mtd24 attached [2025-09-24 15:42:03.325] mtd32 attached [2025-09-24 15:42:03.325] mtd28 attached [2025-09-24 15:42:03.340] ubi0:textures is mounted. [2025-09-24 15:42:03.372] RTNETLINK answers: File exists [2025-09-24 15:42:03.435] ubi1:dml_code is mounted. [2025-09-24 15:42:03.435] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:42:03.435] ubi2:animations is mounted. [2025-09-24 15:42:03.435] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:42:03.435] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:42:03.435] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:42:03.435] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:42:03.435] data.LB_FadeInType0=100 [2025-09-24 15:42:03.435] data.CHLH_FadeInType0=0 [2025-09-24 15:42:03.435] data.WU_FadeInDelay=0 [2025-09-24 15:42:03.435] max_time_out=0 [2025-09-24 15:42:03.435] No splash screen [2025-09-24 15:42:03.435] stop dss Done [2025-09-24 15:42:03.466] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:42:03.466] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:42:03.482] /dev/mem opened. [2025-09-24 15:42:03.482] Memory mapped at address 0xffff99723000. [2025-09-24 15:42:03.508] Read at address 0x00600018 (0xffff99723018): 0x00000000 [2025-09-24 15:42:03.508] Write at address 0x00600018 (0xffff99723018): 0x00400040, readback 0x00400040 [2025-09-24 15:42:03.668] Loaded PowerVR consumer services. [2025-09-24 15:42:03.755] 512+0 records in [2025-09-24 15:42:03.755] 512+0 records out [2025-09-24 15:42:03.755] Waiting data available... [2025-09-24 15:42:03.787] Starting syslogd/klogd: done [2025-09-24 15:42:03.803] DML Start [2025-09-24 15:42:03.979] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:42:04.203] DML res1: 0 [2025-09-24 15:42:04.705] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:42:04.705] Read Success [2025-09-24 15:42:04.705] Verifying certificate... [2025-09-24 15:42:04.929] Verified OK [2025-09-24 15:42:04.945] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:42:06.605] Verified OK [2025-09-24 15:42:06.605] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:42:07.212] Verified OK [2025-09-24 15:42:07.228] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:42:09.996] fs.protected_hardlinks = 1 [2025-09-24 15:42:09.996] fs.protected_symlinks = 1 [2025-09-24 15:42:10.011] kernel.modules_disabled = 1 [2025-09-24 15:42:10.203] [2025-09-24 15:42:10.203] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:42:11.401] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:42:19.028] SBL1:1210.0.1.0 [2025-09-24 15:42:19.076] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:42:20.644] SBL2:1210.0.1.0 [2025-09-24 15:42:20.676] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:42:20.787] j-A [2025-09-24 15:42:28.141] The R5 Autosar Classic is running [2025-09-24 15:42:28.141] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:42:28.162] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:42:28.770] INIT: version 2.96 booting [2025-09-24 15:42:28.881] INIT: Entering runlevel: 5 [2025-09-24 15:42:29.026] mtd28 attached [2025-09-24 15:42:29.042] mtd24 attached [2025-09-24 15:42:29.058] mtd32 attached [2025-09-24 15:42:29.090] ubi0:animations is mounted. [2025-09-24 15:42:29.166] RTNETLINK answers: File exists [2025-09-24 15:42:29.166] ubi1:textures is mounted. [2025-09-24 15:42:29.166] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:42:29.166] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:42:29.166] ubi2:dml_code is mounted. [2025-09-24 15:42:29.166] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:42:29.166] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:42:29.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:42:29.166] data.LB_FadeInType0=100 [2025-09-24 15:42:29.166] data.CHLH_FadeInType0=0 [2025-09-24 15:42:29.166] data.WU_FadeInDelay=0 [2025-09-24 15:42:29.166] max_time_out=0 [2025-09-24 15:42:29.166] No splash screen [2025-09-24 15:42:29.166] stop dss Done [2025-09-24 15:42:29.251] /dev/mem opened. [2025-09-24 15:42:29.251] Memory mapped at address 0xffff853e6000. [2025-09-24 15:42:29.251] Read at address 0x00600018 (0xffff853e6018): 0x00000000 [2025-09-24 15:42:29.251] Write at address 0x00600018 (0xffff853e6018): 0x00400040, readback 0x00400040 [2025-09-24 15:42:29.251] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:42:29.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:42:29.314] Loaded PowerVR consumer services. [2025-09-24 15:42:29.468] 512+0 records in [2025-09-24 15:42:29.468] 512+0 records out [2025-09-24 15:42:29.468] Waiting data available... [2025-09-24 15:42:29.499] Starting syslogd/klogd: done [2025-09-24 15:42:29.515] DML Start [2025-09-24 15:42:29.676] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:42:29.932] DML res1: 0 [2025-09-24 15:42:30.392] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:42:30.392] Read Success [2025-09-24 15:42:30.392] Verifying certificate... [2025-09-24 15:42:30.616] Verified OK [2025-09-24 15:42:30.632] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:42:32.318] Verified OK [2025-09-24 15:42:32.318] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:42:32.963] Verified OK [2025-09-24 15:42:32.963] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:42:35.554] fs.protected_hardlinks = 1 [2025-09-24 15:42:35.554] fs.protected_symlinks = 1 [2025-09-24 15:42:35.569] kernel.modules_disabled = 1 [2025-09-24 15:42:35.778] [2025-09-24 15:42:35.778] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:42:37.000] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:42:44.736] SBL1:1210.0.1.0 [2025-09-24 15:42:44.768] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:42:46.350] SBL2:1210.0.1.0 [2025-09-24 15:42:46.382] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:42:46.494] j-A [2025-09-24 15:42:53.864] The R5 Autosar Classic is running [2025-09-24 15:42:53.864] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:42:53.864] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:42:54.472] INIT: version 2.96 booting [2025-09-24 15:42:54.583] INIT: Entering runlevel: 5 [2025-09-24 15:42:54.727] mtd28 attached [2025-09-24 15:42:54.743] mtd24 attached [2025-09-24 15:42:54.759] mtd32 attached [2025-09-24 15:42:54.816] ubi0:animations is mounted. [2025-09-24 15:42:54.816] RTNETLINK answers: File exists [2025-09-24 15:42:54.816] ubi1:textures is mounted. [2025-09-24 15:42:54.816] ubi2:dml_code is mounted. [2025-09-24 15:42:54.869] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:42:54.869] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:42:54.869] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:42:54.869] data.LB_FadeInType0=100 [2025-09-24 15:42:54.869] data.CHLH_FadeInType0=0 [2025-09-24 15:42:54.869] data.WU_FadeInDelay=0 [2025-09-24 15:42:54.869] max_time_out=0 [2025-09-24 15:42:54.869] No splash screen [2025-09-24 15:42:54.869] stop dss Done [2025-09-24 15:42:54.869] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:42:54.869] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:42:54.901] /dev/mem opened. [2025-09-24 15:42:54.901] Memory mapped at address 0xffff956f8000. [2025-09-24 15:42:54.927] Read at address 0x00600018 (0xffff956f8018): 0x00000000 [2025-09-24 15:42:54.927] Write at address 0x00600018 (0xffff956f8018): 0x00400040, readback 0x00400040 [2025-09-24 15:42:54.959] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:42:54.959] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:42:55.103] Loaded PowerVR consumer services. [2025-09-24 15:42:55.167] 512+0 records in [2025-09-24 15:42:55.167] 512+0 records out [2025-09-24 15:42:55.167] Waiting data available... [2025-09-24 15:42:55.215] Starting syslogd/klogd: done [2025-09-24 15:42:55.231] DML Start [2025-09-24 15:42:55.406] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:42:55.646] DML res1: 0 [2025-09-24 15:42:56.070] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:42:56.070] Read Success [2025-09-24 15:42:56.070] Verifying certificate... [2025-09-24 15:42:56.311] Verified OK [2025-09-24 15:42:56.326] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:42:58.066] Verified OK [2025-09-24 15:42:58.066] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:42:58.681] Verified OK [2025-09-24 15:42:58.681] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:43:01.207] fs.protected_hardlinks = 1 [2025-09-24 15:43:01.207] fs.protected_symlinks = 1 [2025-09-24 15:43:01.223] kernel.modules_disabled = 1 [2025-09-24 15:43:01.399] [2025-09-24 15:43:01.399] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:43:02.751] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:43:10.438] SBL1:1210.0.1.0 [2025-09-24 15:43:10.486] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:43:12.052] SBL2:1210.0.1.0 [2025-09-24 15:43:12.085] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:43:12.197] j-A [2025-09-24 15:43:19.551] The R5 Autosar Classic is running [2025-09-24 15:43:19.551] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:43:19.572] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:43:20.179] INIT: version 2.96 booting [2025-09-24 15:43:20.290] INIT: Entering runlevel: 5 [2025-09-24 15:43:20.435] mtd24 attached [2025-09-24 15:43:20.451] mtd32 attached [2025-09-24 15:43:20.467] mtd28 attached [2025-09-24 15:43:20.483] ubi0:textures is mounted. [2025-09-24 15:43:20.566] RTNETLINK answers: File exists [2025-09-24 15:43:20.566] ubi1:dml_code is mounted. [2025-09-24 15:43:20.566] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:43:20.566] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:43:20.566] ubi2:animations is mounted. [2025-09-24 15:43:20.566] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:43:20.566] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:43:20.566] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:43:20.566] data.LB_FadeInType0=100 [2025-09-24 15:43:20.566] data.CHLH_FadeInType0=0 [2025-09-24 15:43:20.566] data.WU_FadeInDelay=0 [2025-09-24 15:43:20.566] max_time_out=0 [2025-09-24 15:43:20.566] No splash screen [2025-09-24 15:43:20.566] stop dss Done [2025-09-24 15:43:20.645] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:43:20.645] /dev/mem opened. [2025-09-24 15:43:20.645] Memory mapped at address 0xffff7fbf6000. [2025-09-24 15:43:20.645] Read at address 0x00600018 (0xffff7fbf6018): 0x00000000 [2025-09-24 15:43:20.645] Write at address 0x00600018 (0xffff7fbf6018): 0x00400040, readback 0x00400040 [2025-09-24 15:43:20.645] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:43:20.742] Loaded PowerVR consumer services. [2025-09-24 15:43:20.869] 512+0 records in [2025-09-24 15:43:20.869] 512+0 records out [2025-09-24 15:43:20.885] Waiting data available... [2025-09-24 15:43:20.901] Starting syslogd/klogd: done [2025-09-24 15:43:20.917] DML Start [2025-09-24 15:43:21.125] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:43:21.365] DML res1: 0 [2025-09-24 15:43:21.732] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:43:21.732] Read Success [2025-09-24 15:43:21.732] Verifying certificate... [2025-09-24 15:43:21.972] Verified OK [2025-09-24 15:43:21.987] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:43:23.645] Verified OK [2025-09-24 15:43:23.645] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:43:24.277] Verified OK [2025-09-24 15:43:24.277] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:43:26.979] fs.protected_hardlinks = 1 [2025-09-24 15:43:27.010] fs.protected_symlinks = 1 [2025-09-24 15:43:27.010] kernel.modules_disabled = 1 [2025-09-24 15:43:27.186] [2025-09-24 15:43:27.186] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:43:28.431] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:43:36.140] SBL1:1210.0.1.0 [2025-09-24 15:43:36.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:43:37.756] SBL2:1210.0.1.0 [2025-09-24 15:43:37.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:43:37.899] j-A [2025-09-24 15:43:45.253] The R5 Autosar Classic is running [2025-09-24 15:43:45.253] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:43:45.274] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:43:45.881] INIT: version 2.96 booting [2025-09-24 15:43:45.993] INIT: Entering runlevel: 5 [2025-09-24 15:43:46.154] mtd24 attached [2025-09-24 15:43:46.154] mtd28 attached [2025-09-24 15:43:46.169] mtd32 attached [2025-09-24 15:43:46.201] ubi0:textures is mounted. [2025-09-24 15:43:46.217] ubi2:dml_code is mounted. [2025-09-24 15:43:46.272] RTNETLINK answers: File exists [2025-09-24 15:43:46.272] ubi1:animations is mounted. [2025-09-24 15:43:46.272] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:43:46.272] data.LB_FadeInType0=100 [2025-09-24 15:43:46.272] data.CHLH_FadeInType0=0 [2025-09-24 15:43:46.272] data.WU_FadeInDelay=0 [2025-09-24 15:43:46.272] max_time_out=0 [2025-09-24 15:43:46.272] No splash screen [2025-09-24 15:43:46.272] stop dss Done [2025-09-24 15:43:46.272] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:43:46.272] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:43:46.288] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:43:46.288] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:43:46.320] /dev/mem opened. [2025-09-24 15:43:46.320] Memory mapped at address 0xffffa909b000. [2025-09-24 15:43:46.320] Read at address 0x00600018 (0xffffa909b018): 0x00000000 [2025-09-24 15:43:46.320] Write at address 0x00600018 (0xffffa909b018): 0x00400040, readback 0x00400040 [2025-09-24 15:43:46.368] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:43:46.395] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:43:46.507] Loaded PowerVR consumer services. [2025-09-24 15:43:46.610] Waiting data available... [2025-09-24 15:43:46.610] 512+0 records in [2025-09-24 15:43:46.610] 512+0 records out [2025-09-24 15:43:46.658] Starting syslogd/klogd: done [2025-09-24 15:43:46.674] DML Start [2025-09-24 15:43:46.882] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:43:47.058] DML res1: 0 [2025-09-24 15:43:47.521] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:43:47.542] Read Success [2025-09-24 15:43:47.542] Verifying certificate... [2025-09-24 15:43:47.766] Verified OK [2025-09-24 15:43:47.782] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:43:49.425] Verified OK [2025-09-24 15:43:49.425] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:43:50.032] Verified OK [2025-09-24 15:43:50.032] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:43:52.574] fs.protected_hardlinks = 1 [2025-09-24 15:43:52.590] fs.protected_symlinks = 1 [2025-09-24 15:43:52.606] kernel.modules_disabled = 1 [2025-09-24 15:43:52.782] [2025-09-24 15:43:52.782] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:43:54.154] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:43:56.455] SBL1:1210.0.1.0 [2025-09-24 15:44:01.921] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:44:03.489] SBL2:1210.0.1.0 [2025-09-24 15:44:03.521] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:44:03.632] j-A [2025-09-24 15:44:11.004] The R5 Autosar Classic is running [2025-09-24 15:44:11.004] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:44:11.004] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:44:11.612] INIT: version 2.96 booting [2025-09-24 15:44:11.723] INIT: Entering runlevel: 5 [2025-09-24 15:44:11.867] mtd32 attached [2025-09-24 15:44:11.883] mtd28 attached [2025-09-24 15:44:11.883] mtd24 attached [2025-09-24 15:44:11.984] ubi0:dml_code is mounted. [2025-09-24 15:44:11.984] RTNETLINK answers: File exists [2025-09-24 15:44:11.984] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:44:11.984] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:44:11.984] ubi1:animations is mounted. [2025-09-24 15:44:11.984] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:44:11.984] ubi2:textures is mounted. [2025-09-24 15:44:11.984] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:44:11.984] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:44:12.010] data.LB_FadeInType0=100 [2025-09-24 15:44:12.010] data.CHLH_FadeInType0=0 [2025-09-24 15:44:12.010] data.WU_FadeInDelay=0 [2025-09-24 15:44:12.010] max_time_out=0 [2025-09-24 15:44:12.010] No splash screen [2025-09-24 15:44:12.010] stop dss Done [2025-09-24 15:44:12.040] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:44:12.040] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:44:12.056] /dev/mem opened. [2025-09-24 15:44:12.056] Memory mapped at address 0xffffa0143000. [2025-09-24 15:44:12.082] Read at address 0x00600018 (0xffffa0143018): 0x00000000 [2025-09-24 15:44:12.082] Write at address 0x00600018 (0xffffa0143018): 0x00400040, readback 0x00400040 [2025-09-24 15:44:12.274] Loaded PowerVR consumer services. [2025-09-24 15:44:12.313] Waiting data available... [2025-09-24 15:44:12.313] 512+0 records in [2025-09-24 15:44:12.313] 512+0 records out [2025-09-24 15:44:12.344] Starting syslogd/klogd: done [2025-09-24 15:44:12.361] DML Start [2025-09-24 15:44:12.569] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:44:12.808] DML res1: 0 [2025-09-24 15:44:13.188] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:44:13.188] Read Success [2025-09-24 15:44:13.188] Verifying certificate... [2025-09-24 15:44:13.412] Verified OK [2025-09-24 15:44:13.428] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:44:14.963] Verified OK [2025-09-24 15:44:14.963] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:44:15.570] Verified OK [2025-09-24 15:44:15.591] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:44:18.400] fs.protected_hardlinks = 1 [2025-09-24 15:44:18.400] fs.protected_symlinks = 1 [2025-09-24 15:44:18.400] kernel.modules_disabled = 1 [2025-09-24 15:44:18.576] [2025-09-24 15:44:18.576] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:44:19.879] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:44:22.158] SBL1:1210.0.1.0 [2025-09-24 15:44:27.609] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:44:29.176] SBL2:1210.0.1.0 [2025-09-24 15:44:29.208] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:44:29.319] j-A [2025-09-24 15:44:36.692] The R5 Autosar Classic is running [2025-09-24 15:44:36.692] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:44:36.692] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:44:37.300] INIT: version 2.96 booting [2025-09-24 15:44:37.412] INIT: Entering runlevel: 5 [2025-09-24 15:44:37.572] mtd24 attached [2025-09-24 15:44:37.572] mtd28 attached [2025-09-24 15:44:37.588] mtd32 attached [2025-09-24 15:44:37.636] ubi0:textures is mounted. [2025-09-24 15:44:37.636] RTNETLINK answers: File exists [2025-09-24 15:44:37.673] ubi1:animations is mounted. [2025-09-24 15:44:37.673] ubi2:dml_code is mounted. [2025-09-24 15:44:37.673] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:44:37.673] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:44:37.673] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:44:37.705] data.LB_FadeInType0=100 [2025-09-24 15:44:37.705] data.CHLH_FadeInType0=0 [2025-09-24 15:44:37.705] data.WU_FadeInDelay=0 [2025-09-24 15:44:37.705] max_time_out=0 [2025-09-24 15:44:37.705] No splash screen [2025-09-24 15:44:37.705] stop dss Done [2025-09-24 15:44:37.705] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:44:37.705] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:44:37.778] /dev/mem opened. [2025-09-24 15:44:37.778] Memory mapped at address 0xffff9cb67000. [2025-09-24 15:44:37.778] Read at address 0x00600018 (0xffff9cb67018): 0x00000000 [2025-09-24 15:44:37.778] Write at address 0x00600018 (0xffff9cb67018): 0x00400040, readback 0x00400040 [2025-09-24 15:44:37.778] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:44:37.794] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:44:37.922] Loaded PowerVR consumer services. [2025-09-24 15:44:38.001] 512+0 records in [2025-09-24 15:44:38.017] 512+0 records out [2025-09-24 15:44:38.017] Waiting data available... [2025-09-24 15:44:38.065] Starting syslogd/klogd: done [2025-09-24 15:44:38.081] DML Start [2025-09-24 15:44:38.242] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:44:38.465] DML res1: 0 [2025-09-24 15:44:38.961] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:44:38.977] Read Success [2025-09-24 15:44:38.977] Verifying certificate... [2025-09-24 15:44:39.201] Verified OK [2025-09-24 15:44:39.217] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:44:40.987] Verified OK [2025-09-24 15:44:40.987] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:44:41.575] Verified OK [2025-09-24 15:44:41.575] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:44:44.036] fs.protected_hardlinks = 1 [2025-09-24 15:44:44.052] fs.protected_symlinks = 1 [2025-09-24 15:44:44.052] kernel.modules_disabled = 1 [2025-09-24 15:44:44.261] [2025-09-24 15:44:44.261] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:44:45.597] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:44:53.273] SBL1:1210.0.1.0 [2025-09-24 15:44:53.321] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:44:54.888] SBL2:1210.0.1.0 [2025-09-24 15:44:54.920] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:44:55.032] j-A [2025-09-24 15:45:02.404] The R5 Autosar Classic is running [2025-09-24 15:45:02.404] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:45:02.404] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:45:03.012] INIT: version 2.96 booting [2025-09-24 15:45:03.124] INIT: Entering runlevel: 5 [2025-09-24 15:45:03.284] mtd32 attached [2025-09-24 15:45:03.284] mtd24 attached [2025-09-24 15:45:03.299] mtd28 attached [2025-09-24 15:45:03.316] ubi0:dml_code is mounted. [2025-09-24 15:45:03.348] RTNETLINK answers: File exists [2025-09-24 15:45:03.402] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:45:03.402] ubi2:animations is mounted. [2025-09-24 15:45:03.402] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:45:03.402] ubi1:textures is mounted. [2025-09-24 15:45:03.402] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:45:03.402] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:45:03.402] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:45:03.402] data.LB_FadeInType0=100 [2025-09-24 15:45:03.402] data.CHLH_FadeInType0=0 [2025-09-24 15:45:03.402] data.WU_FadeInDelay=0 [2025-09-24 15:45:03.402] max_time_out=0 [2025-09-24 15:45:03.402] No splash screen [2025-09-24 15:45:03.402] stop dss Done [2025-09-24 15:45:03.486] /dev/mem opened. [2025-09-24 15:45:03.486] Memory mapped at address 0xffff89861000. [2025-09-24 15:45:03.486] Read at address 0x00600018 (0xffff89861018): 0x00000000 [2025-09-24 15:45:03.486] Write at address 0x00600018 (0xffff89861018): 0x00400040, readback 0x00400040 [2025-09-24 15:45:03.486] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:45:03.486] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:45:03.679] Loaded PowerVR consumer services. [2025-09-24 15:45:03.710] 512+0 records in [2025-09-24 15:45:03.710] 512+0 records out [2025-09-24 15:45:03.726] Waiting data available... [2025-09-24 15:45:03.742] Starting syslogd/klogd: done [2025-09-24 15:45:03.758] DML Start [2025-09-24 15:45:03.919] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:45:04.126] DML res1: 0 [2025-09-24 15:45:04.669] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:45:04.690] Read Success [2025-09-24 15:45:04.690] Verifying certificate... [2025-09-24 15:45:04.930] Verified OK [2025-09-24 15:45:04.946] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:45:06.640] Verified OK [2025-09-24 15:45:06.640] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:45:07.208] Verified OK [2025-09-24 15:45:07.208] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:45:09.766] fs.protected_hardlinks = 1 [2025-09-24 15:45:09.766] fs.protected_symlinks = 1 [2025-09-24 15:45:09.782] kernel.modules_disabled = 1 [2025-09-24 15:45:09.958] [2025-09-24 15:45:09.958] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:45:11.269] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:45:19.190] SBL1:1210.0.1.0 [2025-09-24 15:45:19.238] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:45:20.804] SBL2:1210.0.1.0 [2025-09-24 15:45:20.836] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:45:20.949] j-A [2025-09-24 15:45:28.322] The R5 Autosar Classic is running [2025-09-24 15:45:28.322] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:45:28.322] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:45:28.929] INIT: version 2.96 booting [2025-09-24 15:45:29.041] INIT: Entering runlevel: 5 [2025-09-24 15:45:29.186] mtd24 attached [2025-09-24 15:45:29.201] mtd28 attached [2025-09-24 15:45:29.217] mtd32 attached [2025-09-24 15:45:29.249] ubi1:animations is mounted. [2025-09-24 15:45:29.265] ubi0:textures is mounted. [2025-09-24 15:45:29.265] RTNETLINK answers: File exists [2025-09-24 15:45:29.319] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:45:29.319] ubi2:dml_code is mounted. [2025-09-24 15:45:29.319] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:45:29.319] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:45:29.319] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:45:29.319] data.LB_FadeInType0=100 [2025-09-24 15:45:29.319] data.CHLH_FadeInType0=0 [2025-09-24 15:45:29.319] data.WU_FadeInDelay=0 [2025-09-24 15:45:29.319] max_time_out=0 [2025-09-24 15:45:29.319] No splash screen [2025-09-24 15:45:29.319] stop dss Done [2025-09-24 15:45:29.319] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:45:29.399] /dev/mem opened. [2025-09-24 15:45:29.399] Memory mapped at address 0xffff9acd1000. [2025-09-24 15:45:29.399] Read at address 0x00600018 (0xffff9acd1018): 0x00000000 [2025-09-24 15:45:29.399] Write at address 0x00600018 (0xffff9acd1018): 0x00400040, readback 0x00400040 [2025-09-24 15:45:29.399] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:45:29.399] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:45:29.478] Loaded PowerVR consumer services. [2025-09-24 15:45:29.630] Waiting data available... [2025-09-24 15:45:29.630] 512+0 records in [2025-09-24 15:45:29.630] 512+0 records out [2025-09-24 15:45:29.662] Starting syslogd/klogd: done [2025-09-24 15:45:29.678] DML Start [2025-09-24 15:45:29.854] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:45:30.077] DML res1: 0 [2025-09-24 15:45:30.573] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:45:30.589] Read Success [2025-09-24 15:45:30.589] Verifying certificate... [2025-09-24 15:45:30.844] Verified OK [2025-09-24 15:45:30.844] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:45:32.628] Verified OK [2025-09-24 15:45:32.628] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:45:33.187] Verified OK [2025-09-24 15:45:33.187] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:45:35.709] fs.protected_hardlinks = 1 [2025-09-24 15:45:35.709] fs.protected_symlinks = 1 [2025-09-24 15:45:35.709] kernel.modules_disabled = 1 [2025-09-24 15:45:35.885] [2025-09-24 15:45:35.885] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:45:37.176] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:45:44.900] SBL1:1210.0.1.0 [2025-09-24 15:45:44.948] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:45:46.515] SBL2:1210.0.1.0 [2025-09-24 15:45:46.563] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:45:46.659] j-A [2025-09-24 15:45:54.014] The R5 Autosar Classic is running [2025-09-24 15:45:54.035] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:45:54.035] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:45:54.643] INIT: version 2.96 booting [2025-09-24 15:45:54.755] INIT: Entering runlevel: 5 [2025-09-24 15:45:54.915] mtd32 attached [2025-09-24 15:45:54.915] mtd24 attached [2025-09-24 15:45:54.946] mtd28 attached [2025-09-24 15:45:54.962] ubi0:dml_code is mounted. [2025-09-24 15:45:54.979] RTNETLINK answers: File exists [2025-09-24 15:45:54.979] ubi1:textures is mounted. [2025-09-24 15:45:55.019] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:45:55.019] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:45:55.019] ubi2:animations is mounted. [2025-09-24 15:45:55.019] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:45:55.019] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:45:55.019] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:45:55.019] data.LB_FadeInType0=100 [2025-09-24 15:45:55.040] data.CHLH_FadeInType0=0 [2025-09-24 15:45:55.040] data.WU_FadeInDelay=0 [2025-09-24 15:45:55.040] max_time_out=0 [2025-09-24 15:45:55.040] No splash screen [2025-09-24 15:45:55.040] stop dss Done [2025-09-24 15:45:55.072] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:45:55.072] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:45:55.126] /dev/mem opened. [2025-09-24 15:45:55.126] Memory mapped at address 0xffff9763e000. [2025-09-24 15:45:55.126] Read at address 0x00600018 (0xffff9763e018): 0x00000000 [2025-09-24 15:45:55.126] Write at address 0x00600018 (0xffff9763e018): 0x00400040, readback 0x00400040 [2025-09-24 15:45:55.206] Loaded PowerVR consumer services. [2025-09-24 15:45:55.303] 512+0 records in [2025-09-24 15:45:55.319] 512+0 records out [2025-09-24 15:45:55.351] Waiting data available... [2025-09-24 15:45:55.367] Starting syslogd/klogd: done [2025-09-24 15:45:55.383] DML Start [2025-09-24 15:45:55.590] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:45:55.846] DML res1: 0 [2025-09-24 15:45:56.214] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:45:56.214] Read Success [2025-09-24 15:45:56.230] Verifying certificate... [2025-09-24 15:45:56.470] Verified OK [2025-09-24 15:45:56.486] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:45:58.099] Verified OK [2025-09-24 15:45:58.099] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:45:58.739] Verified OK [2025-09-24 15:45:58.739] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:46:01.488] fs.protected_hardlinks = 1 [2025-09-24 15:46:01.488] fs.protected_symlinks = 1 [2025-09-24 15:46:01.504] kernel.modules_disabled = 1 [2025-09-24 15:46:01.696] [2025-09-24 15:46:01.696] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:46:02.871] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:46:10.610] SBL1:1210.0.1.0 [2025-09-24 15:46:10.658] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:46:12.225] SBL2:1210.0.1.0 [2025-09-24 15:46:12.257] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:46:12.369] j-A [2025-09-24 15:46:19.743] The R5 Autosar Classic is running [2025-09-24 15:46:19.743] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:46:19.743] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:46:20.351] INIT: version 2.96 booting [2025-09-24 15:46:20.463] INIT: Entering runlevel: 5 [2025-09-24 15:46:20.623] mtd28 attached [2025-09-24 15:46:20.623] mtd32 attached [2025-09-24 15:46:20.639] mtd24 attached [2025-09-24 15:46:20.670] ubi0:animations is mounted. [2025-09-24 15:46:20.686] ubi1:dml_code is mounted. [2025-09-24 15:46:20.686] RTNETLINK answers: File exists [2025-09-24 15:46:20.744] ubi2:textures is mounted. [2025-09-24 15:46:20.744] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:46:20.744] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:46:20.744] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:46:20.744] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:46:20.744] data.LB_FadeInType0=100 [2025-09-24 15:46:20.744] data.CHLH_FadeInType0=0 [2025-09-24 15:46:20.744] data.WU_FadeInDelay=0 [2025-09-24 15:46:20.744] max_time_out=0 [2025-09-24 15:46:20.744] No splash screen [2025-09-24 15:46:20.744] stop dss Done [2025-09-24 15:46:20.744] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:46:20.833] /dev/mem opened. [2025-09-24 15:46:20.833] Memory mapped at address 0xffffa4877000. [2025-09-24 15:46:20.833] Read at address 0x00600018 (0xffffa4877018): 0x00000000 [2025-09-24 15:46:20.833] Write at address 0x00600018 (0xffffa4877018): 0x00400040, readback 0x00400040 [2025-09-24 15:46:20.833] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:46:20.833] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:46:20.897] Loaded PowerVR consumer services. [2025-09-24 15:46:21.040] 512+0 records in [2025-09-24 15:46:21.040] 512+0 records out [2025-09-24 15:46:21.056] Waiting data available... [2025-09-24 15:46:21.088] Starting syslogd/klogd: done [2025-09-24 15:46:21.104] DML Start [2025-09-24 15:46:21.313] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:46:21.520] DML res1: 0 [2025-09-24 15:46:21.951] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:46:21.951] Read Success [2025-09-24 15:46:21.951] Verifying certificate... [2025-09-24 15:46:22.223] Verified OK [2025-09-24 15:46:22.239] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:46:23.819] Verified OK [2025-09-24 15:46:23.819] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:46:24.474] Verified OK [2025-09-24 15:46:24.474] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:46:27.143] fs.protected_hardlinks = 1 [2025-09-24 15:46:27.143] fs.protected_symlinks = 1 [2025-09-24 15:46:27.159] kernel.modules_disabled = 1 [2025-09-24 15:46:27.351] [2025-09-24 15:46:27.351] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:46:28.615] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:46:36.323] SBL1:1210.0.1.0 [2025-09-24 15:46:36.371] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:46:37.938] SBL2:1210.0.1.0 [2025-09-24 15:46:37.986] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:46:38.082] j-A [2025-09-24 15:46:45.437] The R5 Autosar Classic is running [2025-09-24 15:46:45.458] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:46:45.458] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:46:46.066] INIT: version 2.96 booting [2025-09-24 15:46:46.178] INIT: Entering runlevel: 5 [2025-09-24 15:46:46.338] mtd24 attached [2025-09-24 15:46:46.338] mtd32 attached [2025-09-24 15:46:46.354] mtd28 attached [2025-09-24 15:46:46.402] ubi0:textures is mounted. [2025-09-24 15:46:46.402] ubi1:dml_code is mounted. [2025-09-24 15:46:46.463] RTNETLINK answers: File exists [2025-09-24 15:46:46.463] ubi2:animations is mounted. [2025-09-24 15:46:46.463] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:46:46.463] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:46:46.463] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:46:46.463] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:46:46.463] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:46:46.463] data.LB_FadeInType0=100 [2025-09-24 15:46:46.463] data.CHLH_FadeInType0=0 [2025-09-24 15:46:46.463] data.WU_FadeInDelay=0 [2025-09-24 15:46:46.463] max_time_out=0 [2025-09-24 15:46:46.463] No splash screen [2025-09-24 15:46:46.463] stop dss Done [2025-09-24 15:46:46.540] /dev/mem opened. [2025-09-24 15:46:46.540] Memory mapped at address 0xffffb30fd000. [2025-09-24 15:46:46.540] Read at address 0x00600018 (0xffffb30fd018): 0x00000000 [2025-09-24 15:46:46.540] Write at address 0x00600018 (0xffffb30fd018): 0x00400040, readback 0x00400040 [2025-09-24 15:46:46.540] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:46:46.540] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:46:46.636] Loaded PowerVR consumer services. [2025-09-24 15:46:46.779] 512+0 records in [2025-09-24 15:46:46.779] 512+0 records out [2025-09-24 15:46:46.779] Waiting data available... [2025-09-24 15:46:46.795] Starting syslogd/klogd: done [2025-09-24 15:46:46.811] DML Start [2025-09-24 15:46:47.003] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:46:47.211] DML res1: 0 [2025-09-24 15:46:47.674] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:46:47.690] Read Success [2025-09-24 15:46:47.690] Verifying certificate... [2025-09-24 15:46:47.930] Verified OK [2025-09-24 15:46:47.946] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:46:49.651] Verified OK [2025-09-24 15:46:49.651] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:46:50.269] Verified OK [2025-09-24 15:46:50.269] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:46:52.875] fs.protected_hardlinks = 1 [2025-09-24 15:46:52.891] fs.protected_symlinks = 1 [2025-09-24 15:46:52.891] kernel.modules_disabled = 1 [2025-09-24 15:46:53.099] [2025-09-24 15:46:53.099] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:46:54.308] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:47:02.033] SBL1:1210.0.1.0 [2025-09-24 15:47:02.081] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:47:03.647] SBL2:1210.0.1.0 [2025-09-24 15:47:03.679] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:47:03.792] j-A [2025-09-24 15:47:11.147] The R5 Autosar Classic is running [2025-09-24 15:47:11.147] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:47:11.168] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:47:11.775] INIT: version 2.96 booting [2025-09-24 15:47:11.888] INIT: Entering runlevel: 5 [2025-09-24 15:47:12.031] mtd24 attached [2025-09-24 15:47:12.063] mtd32 attached [2025-09-24 15:47:12.063] mtd28 attached [2025-09-24 15:47:12.079] ubi0:textures is mounted. [2025-09-24 15:47:12.111] ubi1:dml_code is mounted. [2025-09-24 15:47:12.176] RTNETLINK answers: File exists [2025-09-24 15:47:12.176] ubi2:animations is mounted. [2025-09-24 15:47:12.176] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:47:12.176] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:47:12.176] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:47:12.176] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:47:12.176] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:47:12.176] data.LB_FadeInType0=100 [2025-09-24 15:47:12.176] data.CHLH_FadeInType0=0 [2025-09-24 15:47:12.176] data.WU_FadeInDelay=0 [2025-09-24 15:47:12.176] max_time_out=0 [2025-09-24 15:47:12.176] No splash screen [2025-09-24 15:47:12.176] stop dss Done [2025-09-24 15:47:12.225] /dev/mem opened. [2025-09-24 15:47:12.225] Memory mapped at address 0xffffaefad000. [2025-09-24 15:47:12.251] Read at address 0x00600018 (0xffffaefad018): 0x00000000 [2025-09-24 15:47:12.251] Write at address 0x00600018 (0xffffaefad018): 0x00400040, readback 0x00400040 [2025-09-24 15:47:12.251] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:47:12.266] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:47:12.410] Loaded PowerVR consumer services. [2025-09-24 15:47:12.458] 512+0 records in [2025-09-24 15:47:12.458] 512+0 records out [2025-09-24 15:47:12.506] Starting syslogd/klogd: done [2025-09-24 15:47:12.554] Waiting data available... [2025-09-24 15:47:12.554] DML Start [2025-09-24 15:47:12.778] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:47:12.986] DML res1: 0 [2025-09-24 15:47:13.349] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:47:13.349] Read Success [2025-09-24 15:47:13.349] Verifying certificate... [2025-09-24 15:47:13.636] Verified OK [2025-09-24 15:47:13.652] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:47:15.281] Verified OK [2025-09-24 15:47:15.281] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:47:15.985] Verified OK [2025-09-24 15:47:15.985] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:47:18.623] fs.protected_hardlinks = 1 [2025-09-24 15:47:18.623] fs.protected_symlinks = 1 [2025-09-24 15:47:18.638] kernel.modules_disabled = 1 [2025-09-24 15:47:18.831] [2025-09-24 15:47:18.831] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:47:20.030] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:47:27.740] SBL1:1210.0.1.0 [2025-09-24 15:47:27.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:47:29.356] SBL2:1210.0.1.0 [2025-09-24 15:47:29.387] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:47:29.499] j-A [2025-09-24 15:47:36.871] The R5 Autosar Classic is running [2025-09-24 15:47:36.871] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:47:36.871] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:47:37.479] INIT: version 2.96 booting [2025-09-24 15:47:37.590] INIT: Entering runlevel: 5 [2025-09-24 15:47:37.750] mtd32 attached [2025-09-24 15:47:37.750] mtd24 attached [2025-09-24 15:47:37.766] mtd28 attached [2025-09-24 15:47:37.814] RTNETLINK answers: File exists [2025-09-24 15:47:37.863] ubi0:dml_code is mounted. [2025-09-24 15:47:37.863] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:47:37.863] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:47:37.863] ubi2:animations is mounted. [2025-09-24 15:47:37.863] ubi1:textures is mounted. [2025-09-24 15:47:37.863] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:47:37.863] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:47:37.863] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:47:37.863] data.LB_FadeInType0=100 [2025-09-24 15:47:37.863] data.CHLH_FadeInType0=0 [2025-09-24 15:47:37.884] data.WU_FadeInDelay=0 [2025-09-24 15:47:37.884] max_time_out=0 [2025-09-24 15:47:37.884] No splash screen [2025-09-24 15:47:37.884] stop dss Done [2025-09-24 15:47:37.916] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:47:37.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:47:37.950] /dev/mem opened. [2025-09-24 15:47:37.950] Memory mapped at address 0xffff97254000. [2025-09-24 15:47:37.950] Read at address 0x00600018 (0xffff97254018): 0x00000000 [2025-09-24 15:47:37.950] Write at address 0x00600018 (0xffff97254018): 0x00400040, readback 0x00400040 [2025-09-24 15:47:38.158] Loaded PowerVR consumer services. [2025-09-24 15:47:38.190] 512+0 records in [2025-09-24 15:47:38.190] 512+0 records out [2025-09-24 15:47:38.238] Starting syslogd/klogd: Waiting data available... [2025-09-24 15:47:38.254] done [2025-09-24 15:47:38.254] DML Start [2025-09-24 15:47:38.429] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:47:38.654] DML res1: 0 [2025-09-24 15:47:39.139] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:47:39.139] Read Success [2025-09-24 15:47:39.139] Verifying certificate... [2025-09-24 15:47:39.411] Verified OK [2025-09-24 15:47:39.427] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:47:41.113] Verified OK [2025-09-24 15:47:41.113] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:47:41.704] Verified OK [2025-09-24 15:47:41.725] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:47:44.281] fs.protected_hardlinks = 1 [2025-09-24 15:47:44.281] fs.protected_symlinks = 1 [2025-09-24 15:47:44.281] kernel.modules_disabled = 1 [2025-09-24 15:47:44.457] [2025-09-24 15:47:44.457] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:47:45.752] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:47:53.463] SBL1:1210.0.1.0 [2025-09-24 15:47:53.495] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:47:55.078] SBL2:1210.0.1.0 [2025-09-24 15:47:55.110] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:47:55.221] j-A [2025-09-24 15:48:02.592] The R5 Autosar Classic is running [2025-09-24 15:48:02.592] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:48:02.592] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:48:03.199] INIT: version 2.96 booting [2025-09-24 15:48:03.312] INIT: Entering runlevel: 5 [2025-09-24 15:48:03.472] mtd32 attached [2025-09-24 15:48:03.472] mtd24 attached [2025-09-24 15:48:03.487] mtd28 attached [2025-09-24 15:48:03.535] RTNETLINK answers: File exists [2025-09-24 15:48:03.535] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:48:03.595] ubi0:dml_code is mounted. [2025-09-24 15:48:03.595] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:48:03.595] ubi1:textures is mounted. [2025-09-24 15:48:03.595] ubi2:animations is mounted. [2025-09-24 15:48:03.595] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:48:03.595] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:48:03.595] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:48:03.595] data.LB_FadeInType0=100 [2025-09-24 15:48:03.595] data.CHLH_FadeInType0=0 [2025-09-24 15:48:03.595] data.WU_FadeInDelay=0 [2025-09-24 15:48:03.595] max_time_out=0 [2025-09-24 15:48:03.595] No splash screen [2025-09-24 15:48:03.595] stop dss Done [2025-09-24 15:48:03.611] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:48:03.665] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:48:03.665] /dev/mem opened. [2025-09-24 15:48:03.665] Memory mapped at address 0xffffbdbe9000. [2025-09-24 15:48:03.665] Read at address 0x00600018 (0xffffbdbe9018): 0x00000000 [2025-09-24 15:48:03.665] Write at address 0x00600018 (0xffffbdbe9018): 0x00400040, readback 0x00400040 [2025-09-24 15:48:03.793] Loaded PowerVR consumer services. [2025-09-24 15:48:03.889] 512+0 records in [2025-09-24 15:48:03.889] 512+0 records out [2025-09-24 15:48:03.921] Waiting data available... [2025-09-24 15:48:03.937] Starting syslogd/klogd: done [2025-09-24 15:48:03.953] DML Start [2025-09-24 15:48:04.161] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:48:04.353] DML res1: 0 [2025-09-24 15:48:04.817] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:48:04.832] Read Success [2025-09-24 15:48:04.832] Verifying certificate... [2025-09-24 15:48:05.056] Verified OK [2025-09-24 15:48:05.072] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:48:06.780] Verified OK [2025-09-24 15:48:06.780] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:48:07.403] Verified OK [2025-09-24 15:48:07.419] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:48:09.977] fs.protected_hardlinks = 1 [2025-09-24 15:48:09.993] fs.protected_symlinks = 1 [2025-09-24 15:48:09.993] kernel.modules_disabled = 1 [2025-09-24 15:48:10.201] [2025-09-24 15:48:10.201] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:48:11.447] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:48:19.204] SBL1:1210.0.1.0 [2025-09-24 15:48:19.236] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:48:20.819] SBL2:1210.0.1.0 [2025-09-24 15:48:20.851] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:48:20.947] j-A [2025-09-24 15:48:28.300] The R5 Autosar Classic is running [2025-09-24 15:48:28.325] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:48:28.325] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:48:28.933] INIT: version 2.96 booting [2025-09-24 15:48:29.044] INIT: Entering runlevel: 5 [2025-09-24 15:48:29.205] mtd32 attached [2025-09-24 15:48:29.205] mtd28 attached [2025-09-24 15:48:29.221] mtd24 attached [2025-09-24 15:48:29.269] RTNETLINK answers: File exists [2025-09-24 15:48:29.339] ubi1:animations is mounted. [2025-09-24 15:48:29.339] ubi0:dml_code is mounted. [2025-09-24 15:48:29.339] ubi2:textures is mounted. [2025-09-24 15:48:29.339] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:48:29.339] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:48:29.339] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:48:29.339] data.LB_FadeInType0=100 [2025-09-24 15:48:29.339] data.CHLH_FadeInType0=0 [2025-09-24 15:48:29.339] data.WU_FadeInDelay=0 [2025-09-24 15:48:29.339] max_time_out=0 [2025-09-24 15:48:29.339] No splash screen [2025-09-24 15:48:29.339] stop dss Done [2025-09-24 15:48:29.339] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:48:29.339] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:48:29.425] /dev/mem opened. [2025-09-24 15:48:29.425] Memory mapped at address 0xffff8f9d1000. [2025-09-24 15:48:29.425] Read at address 0x00600018 (0xffff8f9d1018): 0x00000000 [2025-09-24 15:48:29.425] Write at address 0x00600018 (0xffff8f9d1018): 0x00400040, readback 0x00400040 [2025-09-24 15:48:29.425] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:48:29.425] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:48:29.537] Loaded PowerVR consumer services. [2025-09-24 15:48:29.617] 512+0 records in [2025-09-24 15:48:29.617] 512+0 records out [2025-09-24 15:48:29.649] Waiting data available... [2025-09-24 15:48:29.665] Starting syslogd/klogd: done [2025-09-24 15:48:29.681] DML Start [2025-09-24 15:48:29.872] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:48:30.096] DML res1: 0 [2025-09-24 15:48:30.602] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:48:30.602] Read Success [2025-09-24 15:48:30.602] Verifying certificate... [2025-09-24 15:48:30.842] Verified OK [2025-09-24 15:48:30.857] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:48:32.671] Verified OK [2025-09-24 15:48:32.671] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:48:33.226] Verified OK [2025-09-24 15:48:33.226] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:48:35.640] fs.protected_hardlinks = 1 [2025-09-24 15:48:35.656] fs.protected_symlinks = 1 [2025-09-24 15:48:35.656] kernel.modules_disabled = 1 [2025-09-24 15:48:35.848] [2025-09-24 15:48:35.848] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:48:37.169] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:48:44.899] SBL1:1210.0.1.0 [2025-09-24 15:48:44.947] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:48:46.514] SBL2:1210.0.1.0 [2025-09-24 15:48:46.546] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:48:46.658] j-A [2025-09-24 15:48:54.012] The R5 Autosar Classic is running [2025-09-24 15:48:54.033] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:48:54.033] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:48:54.641] INIT: version 2.96 booting [2025-09-24 15:48:54.752] INIT: Entering runlevel: 5 [2025-09-24 15:48:54.912] mtd24 attached [2025-09-24 15:48:54.912] mtd28 attached [2025-09-24 15:48:54.929] mtd32 attached [2025-09-24 15:48:54.960] ubi0:textures is mounted. [2025-09-24 15:48:54.977] RTNETLINK answers: File exists [2025-09-24 15:48:55.030] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:48:55.030] ubi1:animations is mounted. [2025-09-24 15:48:55.030] ubi2:dml_code is mounted. [2025-09-24 15:48:55.030] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:48:55.030] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:48:55.030] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:48:55.030] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:48:55.030] data.LB_FadeInType0=100 [2025-09-24 15:48:55.030] data.CHLH_FadeInType0=0 [2025-09-24 15:48:55.030] data.WU_FadeInDelay=0 [2025-09-24 15:48:55.030] max_time_out=0 [2025-09-24 15:48:55.030] No splash screen [2025-09-24 15:48:55.030] stop dss Done [2025-09-24 15:48:55.104] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:48:55.104] /dev/mem opened. [2025-09-24 15:48:55.104] Memory mapped at address 0xffffa0263000. [2025-09-24 15:48:55.104] Read at address 0x00600018 (0xffffa0263018): 0x00000000 [2025-09-24 15:48:55.104] Write at address 0x00600018 (0xffffa0263018): 0x00400040, readback 0x00400040 [2025-09-24 15:48:55.104] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:48:55.200] Loaded PowerVR consumer services. [2025-09-24 15:48:55.359] Waiting data available... [2025-09-24 15:48:55.359] 512+0 records in [2025-09-24 15:48:55.359] 512+0 records out [2025-09-24 15:48:55.375] Starting syslogd/klogd: done [2025-09-24 15:48:55.391] DML Start [2025-09-24 15:48:55.583] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:48:55.838] DML res1: 0 [2025-09-24 15:48:56.254] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:48:56.254] Read Success [2025-09-24 15:48:56.254] Verifying certificate... [2025-09-24 15:48:56.477] Verified OK [2025-09-24 15:48:56.493] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:48:58.149] Verified OK [2025-09-24 15:48:58.149] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:48:58.709] Verified OK [2025-09-24 15:48:58.709] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:49:01.299] fs.protected_hardlinks = 1 [2025-09-24 15:49:01.299] fs.protected_symlinks = 1 [2025-09-24 15:49:01.315] kernel.modules_disabled = 1 [2025-09-24 15:49:01.523] [2025-09-24 15:49:01.523] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:49:02.898] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:49:10.610] SBL1:1210.0.1.0 [2025-09-24 15:49:10.641] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:49:12.224] SBL2:1210.0.1.0 [2025-09-24 15:49:12.256] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:49:12.368] j-A [2025-09-24 15:49:19.738] The R5 Autosar Classic is running [2025-09-24 15:49:19.738] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:49:19.738] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:49:20.345] INIT: version 2.96 booting [2025-09-24 15:49:20.457] INIT: Entering runlevel: 5 [2025-09-24 15:49:20.617] mtd24 attached [2025-09-24 15:49:20.617] mtd28 attached [2025-09-24 15:49:20.649] mtd32 attached [2025-09-24 15:49:20.664] ubi0:textures is mounted. [2025-09-24 15:49:20.680] ubi1:animations is mounted. [2025-09-24 15:49:20.735] RTNETLINK answers: File exists [2025-09-24 15:49:20.735] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:49:20.735] ubi2:dml_code is mounted. [2025-09-24 15:49:20.735] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:49:20.735] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:49:20.735] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:49:20.735] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:49:20.735] data.LB_FadeInType0=100 [2025-09-24 15:49:20.735] data.CHLH_FadeInType0=0 [2025-09-24 15:49:20.735] data.WU_FadeInDelay=0 [2025-09-24 15:49:20.735] max_time_out=0 [2025-09-24 15:49:20.735] No splash screen [2025-09-24 15:49:20.735] stop dss Done [2025-09-24 15:49:20.816] /dev/mem opened. [2025-09-24 15:49:20.816] Memory mapped at address 0xffff9e88c000. [2025-09-24 15:49:20.816] Read at address 0x00600018 (0xffff9e88c018): 0x00000000 [2025-09-24 15:49:20.816] Write at address 0x00600018 (0xffff9e88c018): 0x00400040, readback 0x00400040 [2025-09-24 15:49:20.860] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:49:20.860] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:49:21.019] Loaded PowerVR consumer services. [2025-09-24 15:49:21.051] 512+0 records in [2025-09-24 15:49:21.051] 512+0 records out [2025-09-24 15:49:21.084] Starting syslogd/klogd: done [2025-09-24 15:49:21.100] Waiting data available... [2025-09-24 15:49:21.100] DML Start [2025-09-24 15:49:21.307] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:49:21.515] DML res1: 0 [2025-09-24 15:49:21.931] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:49:21.947] Read Success [2025-09-24 15:49:21.947] Verifying certificate... [2025-09-24 15:49:22.187] Verified OK [2025-09-24 15:49:22.203] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:49:23.977] Verified OK [2025-09-24 15:49:23.977] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:49:24.597] Verified OK [2025-09-24 15:49:24.597] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:49:27.235] fs.protected_hardlinks = 1 [2025-09-24 15:49:27.235] fs.protected_symlinks = 1 [2025-09-24 15:49:27.251] kernel.modules_disabled = 1 [2025-09-24 15:49:27.443] [2025-09-24 15:49:27.443] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:49:28.591] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:49:36.304] SBL1:1210.0.1.0 [2025-09-24 15:49:36.336] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:49:37.919] SBL2:1210.0.1.0 [2025-09-24 15:49:37.952] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 15:49:38.063] j-A [2025-09-24 15:49:45.434] The R5 Autosar Classic is running [2025-09-24 15:49:45.434] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:49:45.434] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:49:46.041] INIT: version 2.96 booting [2025-09-24 15:49:46.153] INIT: Entering runlevel: 5 [2025-09-24 15:49:46.297] mtd24 attached [2025-09-24 15:49:46.312] mtd28 attached [2025-09-24 15:49:46.328] mtd32 attached [2025-09-24 15:49:46.344] ubi0:textures is mounted. [2025-09-24 15:49:46.377] ubi1:animations is mounted. [2025-09-24 15:49:46.413] RTNETLINK answers: File exists [2025-09-24 15:49:46.413] ubi2:dml_code is mounted. [2025-09-24 15:49:46.413] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:49:46.413] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:49:46.413] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:49:46.446] data.LB_FadeInType0=100 [2025-09-24 15:49:46.446] data.CHLH_FadeInType0=0 [2025-09-24 15:49:46.446] data.WU_FadeInDelay=0 [2025-09-24 15:49:46.446] max_time_out=0 [2025-09-24 15:49:46.446] No splash screen [2025-09-24 15:49:46.446] stop dss Done [2025-09-24 15:49:46.446] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:49:46.446] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:49:46.529] /dev/mem opened. [2025-09-24 15:49:46.529] Memory mapped at address 0xffff8c2a5000. [2025-09-24 15:49:46.529] Read at address 0x00600018 (0xffff8c2a5018): 0x00000000 [2025-09-24 15:49:46.529] Write at address 0x00600018 (0xffff8c2a5018): 0x00400040, readback 0x00400040 [2025-09-24 15:49:46.529] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:49:46.529] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:49:46.688] Loaded PowerVR consumer services. [2025-09-24 15:49:46.736] 512+0 records in [2025-09-24 15:49:46.736] 512+0 records out [2025-09-24 15:49:46.768] Starting syslogd/klogd: Waiting data available... [2025-09-24 15:49:46.784] done [2025-09-24 15:49:46.784] DML Start [2025-09-24 15:49:46.945] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:49:47.232] DML res1: 0 [2025-09-24 15:49:47.594] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:49:47.594] Read Success [2025-09-24 15:49:47.594] Verifying certificate... [2025-09-24 15:49:47.913] Verified OK [2025-09-24 15:49:47.929] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:49:49.672] Verified OK [2025-09-24 15:49:49.688] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:49:50.239] Verified OK [2025-09-24 15:49:50.239] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:49:52.702] fs.protected_hardlinks = 1 [2025-09-24 15:49:52.702] fs.protected_symlinks = 1 [2025-09-24 15:49:52.718] kernel.modules_disabled = 1 [2025-09-24 15:49:52.910] [2025-09-24 15:49:52.910] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:49:54.290] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:50:02.024] SBL1:1210.0.1.0 [2025-09-24 15:50:02.056] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:50:03.640] SBL2:1210.0.1.0 [2025-09-24 15:50:03.672] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:50:03.783] j-A [2025-09-24 15:50:11.153] The R5 Autosar Classic is running [2025-09-24 15:50:11.153] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:50:11.153] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:50:11.760] INIT: version 2.96 booting [2025-09-24 15:50:11.873] INIT: Entering runlevel: 5 [2025-09-24 15:50:12.033] mtd32 attached [2025-09-24 15:50:12.033] mtd24 attached [2025-09-24 15:50:12.048] mtd28 attached [2025-09-24 15:50:12.096] RTNETLINK answers: File exists [2025-09-24 15:50:12.158] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:50:12.158] ubi1:textures is mounted. [2025-09-24 15:50:12.158] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:50:12.158] ubi2:animations is mounted. [2025-09-24 15:50:12.158] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:50:12.158] ubi0:dml_code is mounted. [2025-09-24 15:50:12.158] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:50:12.158] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:50:12.158] data.LB_FadeInType0=100 [2025-09-24 15:50:12.158] data.CHLH_FadeInType0=0 [2025-09-24 15:50:12.158] data.WU_FadeInDelay=0 [2025-09-24 15:50:12.158] max_time_out=0 [2025-09-24 15:50:12.158] No splash screen [2025-09-24 15:50:12.158] stop dss Done [2025-09-24 15:50:12.224] /dev/mem opened. [2025-09-24 15:50:12.224] Memory mapped at address 0xffff833db000. [2025-09-24 15:50:12.224] Read at address 0x00600018 (0xffff833db018): 0x00000000 [2025-09-24 15:50:12.224] Write at address 0x00600018 (0xffff833db018): 0x00400040, readback 0x00400040 [2025-09-24 15:50:12.224] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:50:12.240] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:50:12.383] Loaded PowerVR consumer services. [2025-09-24 15:50:12.463] Waiting data available... [2025-09-24 15:50:12.479] 512+0 records in [2025-09-24 15:50:12.479] 512+0 records out [2025-09-24 15:50:12.527] Starting syslogd/klogd: done [2025-09-24 15:50:12.559] DML Start [2025-09-24 15:50:12.735] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:50:12.943] DML res1: 0 [2025-09-24 15:50:13.448] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:50:13.448] Read Success [2025-09-24 15:50:13.448] Verifying certificate... [2025-09-24 15:50:13.687] Verified OK [2025-09-24 15:50:13.688] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:50:15.318] Verified OK [2025-09-24 15:50:15.318] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:50:15.909] Verified OK [2025-09-24 15:50:15.930] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:50:18.648] fs.protected_hardlinks = 1 [2025-09-24 15:50:18.664] fs.protected_symlinks = 1 [2025-09-24 15:50:18.664] kernel.modules_disabled = 1 [2025-09-24 15:50:18.856] [2025-09-24 15:50:18.856] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:50:20.054] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:50:27.739] SBL1:1210.0.1.0 [2025-09-24 15:50:27.771] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:50:29.353] SBL2:1210.0.1.0 [2025-09-24 15:50:29.386] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:50:29.498] j-A [2025-09-24 15:50:36.868] The R5 Autosar Classic is running [2025-09-24 15:50:36.868] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:50:36.868] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:50:37.476] INIT: version 2.96 booting [2025-09-24 15:50:37.587] INIT: Entering runlevel: 5 [2025-09-24 15:50:37.747] mtd28 attached [2025-09-24 15:50:37.747] mtd24 attached [2025-09-24 15:50:37.764] mtd32 attached [2025-09-24 15:50:37.812] RTNETLINK answers: File exists [2025-09-24 15:50:37.812] ubi1:textures is mounted. [2025-09-24 15:50:37.850] ubi0:animations is mounted. [2025-09-24 15:50:37.850] ubi2:dml_code is mounted. [2025-09-24 15:50:37.850] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:50:37.850] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:50:37.850] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:50:37.850] data.LB_FadeInType0=100 [2025-09-24 15:50:37.881] data.CHLH_FadeInType0=0 [2025-09-24 15:50:37.881] data.WU_FadeInDelay=0 [2025-09-24 15:50:37.881] max_time_out=0 [2025-09-24 15:50:37.881] No splash screen [2025-09-24 15:50:37.881] stop dss Done [2025-09-24 15:50:37.881] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:50:37.881] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:50:37.929] /dev/mem opened. [2025-09-24 15:50:37.929] Memory mapped at address 0xffffba85c000. [2025-09-24 15:50:37.955] Read at address 0x00600018 (0xffffba85c018): 0x00000000 [2025-09-24 15:50:37.955] Write at address 0x00600018 (0xffffba85c018): 0x00400040, readback 0x00400040 [2025-09-24 15:50:37.955] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:50:37.971] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:50:38.035] Loaded PowerVR consumer services. [2025-09-24 15:50:38.188] 512+0 records in [2025-09-24 15:50:38.188] 512+0 records out [2025-09-24 15:50:38.188] Waiting data available... [2025-09-24 15:50:38.220] Starting syslogd/klogd: done [2025-09-24 15:50:38.252] DML Start [2025-09-24 15:50:38.411] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:50:38.668] DML res1: 0 [2025-09-24 15:50:39.091] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:50:39.091] Read Success [2025-09-24 15:50:39.091] Verifying certificate... [2025-09-24 15:50:39.347] Verified OK [2025-09-24 15:50:39.363] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:50:41.052] Verified OK [2025-09-24 15:50:41.052] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:50:41.659] Verified OK [2025-09-24 15:50:41.681] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:50:44.319] fs.protected_hardlinks = 1 [2025-09-24 15:50:44.347] fs.protected_symlinks = 1 [2025-09-24 15:50:44.347] kernel.modules_disabled = 1 [2025-09-24 15:50:44.523] [2025-09-24 15:50:44.523] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:50:45.752] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:50:53.441] SBL1:1210.0.1.0 [2025-09-24 15:50:53.489] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:50:55.057] SBL2:1210.0.1.0 [2025-09-24 15:50:55.088] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:50:55.200] j-A [2025-09-24 15:51:02.576] The R5 Autosar Classic is running [2025-09-24 15:51:02.576] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:51:02.576] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:51:03.183] INIT: version 2.96 booting [2025-09-24 15:51:03.295] INIT: Entering runlevel: 5 [2025-09-24 15:51:03.439] mtd24 attached [2025-09-24 15:51:03.455] mtd32 attached [2025-09-24 15:51:03.455] mtd28 attached [2025-09-24 15:51:03.554] RTNETLINK answers: File exists [2025-09-24 15:51:03.554] ubi0:textures is mounted. [2025-09-24 15:51:03.554] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:51:03.554] ubi1:dml_code is mounted. [2025-09-24 15:51:03.554] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:51:03.554] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:51:03.554] ubi2:animations is mounted. [2025-09-24 15:51:03.554] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:51:03.554] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:51:03.577] data.LB_FadeInType0=100 [2025-09-24 15:51:03.577] data.CHLH_FadeInType0=0 [2025-09-24 15:51:03.577] data.WU_FadeInDelay=0 [2025-09-24 15:51:03.577] max_time_out=0 [2025-09-24 15:51:03.577] No splash screen [2025-09-24 15:51:03.577] stop dss Done [2025-09-24 15:51:03.625] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:51:03.662] /dev/mem opened. [2025-09-24 15:51:03.662] Memory mapped at address 0xffff917b7000. [2025-09-24 15:51:03.662] Read at address 0x00600018 (0xffff917b7018): 0x00000000 [2025-09-24 15:51:03.662] Write at address 0x00600018 (0xffff917b7018): 0x00400040, readback 0x00400040 [2025-09-24 15:51:03.662] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:51:03.838] Loaded PowerVR consumer services. [2025-09-24 15:51:03.870] 512+0 records in [2025-09-24 15:51:03.870] 512+0 records out [2025-09-24 15:51:03.918] Waiting data available... [2025-09-24 15:51:03.918] Starting syslogd/klogd: done [2025-09-24 15:51:03.950] DML Start [2025-09-24 15:51:04.094] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:51:04.317] DML res1: 0 [2025-09-24 15:51:04.820] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:51:04.820] Read Success [2025-09-24 15:51:04.820] Verifying certificate... [2025-09-24 15:51:05.043] Verified OK [2025-09-24 15:51:05.075] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:51:06.824] Verified OK [2025-09-24 15:51:06.824] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:51:07.368] Verified OK [2025-09-24 15:51:07.368] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:51:09.893] fs.protected_hardlinks = 1 [2025-09-24 15:51:09.893] fs.protected_symlinks = 1 [2025-09-24 15:51:09.909] kernel.modules_disabled = 1 [2025-09-24 15:51:10.102] [2025-09-24 15:51:10.102] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:51:11.420] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:51:19.166] SBL1:1210.0.1.0 [2025-09-24 15:51:19.197] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:51:20.781] SBL2:1210.0.1.0 [2025-09-24 15:51:20.812] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:51:20.908] j-A [2025-09-24 15:51:28.264] The R5 Autosar Classic is running [2025-09-24 15:51:28.288] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:51:28.288] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:51:28.895] INIT: version 2.96 booting [2025-09-24 15:51:29.007] INIT: Entering runlevel: 5 [2025-09-24 15:51:29.167] mtd24 attached [2025-09-24 15:51:29.183] mtd32 attached [2025-09-24 15:51:29.199] mtd28 attached [2025-09-24 15:51:29.199] ubi0:textures is mounted. [2025-09-24 15:51:29.231] RTNETLINK answers: File exists [2025-09-24 15:51:29.297] ubi1:dml_code is mounted. [2025-09-24 15:51:29.297] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:51:29.297] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:51:29.297] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:51:29.297] ubi2:animations is mounted. [2025-09-24 15:51:29.297] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:51:29.297] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:51:29.297] data.LB_FadeInType0=100 [2025-09-24 15:51:29.297] data.CHLH_FadeInType0=0 [2025-09-24 15:51:29.297] data.WU_FadeInDelay=0 [2025-09-24 15:51:29.297] max_time_out=0 [2025-09-24 15:51:29.297] No splash screen [2025-09-24 15:51:29.297] stop dss Done [2025-09-24 15:51:29.313] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:51:29.335] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:51:29.335] /dev/mem opened. [2025-09-24 15:51:29.335] Memory mapped at address 0xffffb12c6000. [2025-09-24 15:51:29.361] Read at address 0x00600018 (0xffffb12c6018): 0x00000000 [2025-09-24 15:51:29.361] Write at address 0x00600018 (0xffffb12c6018): 0x00400040, readback 0x00400040 [2025-09-24 15:51:29.473] Loaded PowerVR consumer services. [2025-09-24 15:51:29.610] Waiting data available... [2025-09-24 15:51:29.610] 512+0 records in [2025-09-24 15:51:29.610] 512+0 records out [2025-09-24 15:51:29.642] Starting syslogd/klogd: done [2025-09-24 15:51:29.659] DML Start [2025-09-24 15:51:29.850] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:51:30.091] DML res1: 0 [2025-09-24 15:51:30.534] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:51:30.534] Read Success [2025-09-24 15:51:30.534] Verifying certificate... [2025-09-24 15:51:30.790] Verified OK [2025-09-24 15:51:30.806] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:51:32.465] Verified OK [2025-09-24 15:51:32.465] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:51:33.056] Verified OK [2025-09-24 15:51:33.056] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:51:35.614] fs.protected_hardlinks = 1 [2025-09-24 15:51:35.614] fs.protected_symlinks = 1 [2025-09-24 15:51:35.614] kernel.modules_disabled = 1 [2025-09-24 15:51:35.789] [2025-09-24 15:51:35.789] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:51:37.166] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:51:44.853] SBL1:1210.0.1.0 [2025-09-24 15:51:44.901] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:51:46.468] SBL2:1210.0.1.0 [2025-09-24 15:51:46.516] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:51:46.611] j-A [2025-09-24 15:51:53.967] The R5 Autosar Classic is running [2025-09-24 15:51:53.990] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:51:53.990] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:51:54.597] INIT: version 2.96 booting [2025-09-24 15:51:54.710] INIT: Entering runlevel: 5 [2025-09-24 15:51:54.869] mtd24 attached [2025-09-24 15:51:54.869] mtd28 attached [2025-09-24 15:51:54.885] mtd32 attached [2025-09-24 15:51:54.933] RTNETLINK answers: File exists [2025-09-24 15:51:54.981] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:51:54.981] ubi1:animations is mounted. [2025-09-24 15:51:54.981] ubi2:dml_code is mounted. [2025-09-24 15:51:54.981] ubi0:textures is mounted. [2025-09-24 15:51:54.981] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:51:54.981] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:51:54.981] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:51:54.981] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:51:55.003] data.LB_FadeInType0=100 [2025-09-24 15:51:55.003] data.CHLH_FadeInType0=0 [2025-09-24 15:51:55.003] data.WU_FadeInDelay=0 [2025-09-24 15:51:55.003] max_time_out=0 [2025-09-24 15:51:55.003] No splash screen [2025-09-24 15:51:55.003] stop dss Done [2025-09-24 15:51:55.036] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:51:55.052] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:51:55.092] /dev/mem opened. [2025-09-24 15:51:55.092] Memory mapped at address 0xffff89911000. [2025-09-24 15:51:55.092] Read at address 0x00600018 (0xffff89911018): 0x00000000 [2025-09-24 15:51:55.092] Write at address 0x00600018 (0xffff89911018): 0x00400040, readback 0x00400040 [2025-09-24 15:51:55.219] Loaded PowerVR consumer services. [2025-09-24 15:51:55.299] 512+0 records in [2025-09-24 15:51:55.315] 512+0 records out [2025-09-24 15:51:55.331] Starting syslogd/klogd: Waiting data available... [2025-09-24 15:51:55.347] done [2025-09-24 15:51:55.347] DML Start [2025-09-24 15:51:55.539] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:51:55.763] DML res1: 0 [2025-09-24 15:51:56.188] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:51:56.188] Read Success [2025-09-24 15:51:56.188] Verifying certificate... [2025-09-24 15:51:56.396] Verified OK [2025-09-24 15:51:56.412] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:51:57.946] Verified OK [2025-09-24 15:51:57.962] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:51:58.642] Verified OK [2025-09-24 15:51:58.642] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:52:01.344] fs.protected_hardlinks = 1 [2025-09-24 15:52:01.360] fs.protected_symlinks = 1 [2025-09-24 15:52:01.360] kernel.modules_disabled = 1 [2025-09-24 15:52:01.552] [2025-09-24 15:52:01.552] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:52:02.807] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:52:10.558] SBL1:1210.0.1.0 [2025-09-24 15:52:10.606] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:52:12.173] SBL2:1210.0.1.0 [2025-09-24 15:52:12.204] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:52:12.317] j-A [2025-09-24 15:52:19.691] The R5 Autosar Classic is running [2025-09-24 15:52:19.691] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:52:19.691] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:52:20.299] INIT: version 2.96 booting [2025-09-24 15:52:20.410] INIT: Entering runlevel: 5 [2025-09-24 15:52:20.570] mtd28 attached [2025-09-24 15:52:20.586] mtd32 attached [2025-09-24 15:52:20.586] mtd24 attached [2025-09-24 15:52:20.634] RTNETLINK answers: File exists [2025-09-24 15:52:20.683] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:52:20.683] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:52:20.683] ubi0:animations is mounted. [2025-09-24 15:52:20.683] ubi1:dml_code is mounted. [2025-09-24 15:52:20.683] ubi2:textures is mounted. [2025-09-24 15:52:20.683] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:52:20.683] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:52:20.683] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:52:20.683] data.LB_FadeInType0=100 [2025-09-24 15:52:20.683] data.CHLH_FadeInType0=0 [2025-09-24 15:52:20.704] data.WU_FadeInDelay=0 [2025-09-24 15:52:20.704] max_time_out=0 [2025-09-24 15:52:20.704] No splash screen [2025-09-24 15:52:20.704] stop dss Done [2025-09-24 15:52:20.790] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:52:20.790] /dev/mem opened. [2025-09-24 15:52:20.790] Memory mapped at address 0xffff818f5000. [2025-09-24 15:52:20.790] Read at address 0x00600018 (0xffff818f5018): 0x00000000 [2025-09-24 15:52:20.790] Write at address 0x00600018 (0xffff818f5018): 0x00400040, readback 0x00400040 [2025-09-24 15:52:20.790] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:52:20.965] Loaded PowerVR consumer services. [2025-09-24 15:52:20.981] 512+0 records in [2025-09-24 15:52:20.997] 512+0 records out [2025-09-24 15:52:21.029] Waiting data available... [2025-09-24 15:52:21.045] Starting syslogd/klogd: done [2025-09-24 15:52:21.061] DML Start [2025-09-24 15:52:21.204] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:52:21.429] DML res1: 0 [2025-09-24 15:52:21.921] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:52:21.921] Read Success [2025-09-24 15:52:21.921] Verifying certificate... [2025-09-24 15:52:22.145] Verified OK [2025-09-24 15:52:22.161] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:52:23.776] Verified OK [2025-09-24 15:52:23.776] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:52:24.399] Verified OK [2025-09-24 15:52:24.415] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:52:27.165] fs.protected_hardlinks = 1 [2025-09-24 15:52:27.165] fs.protected_symlinks = 1 [2025-09-24 15:52:27.181] kernel.modules_disabled = 1 [2025-09-24 15:52:27.373] [2025-09-24 15:52:27.373] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:52:28.596] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:52:36.277] SBL1:1210.0.1.0 [2025-09-24 15:52:36.309] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:52:37.875] SBL2:1210.0.1.0 [2025-09-24 15:52:37.923] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:52:38.020] j-A [2025-09-24 15:52:45.374] The R5 Autosar Classic is running [2025-09-24 15:52:45.398] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:52:45.398] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:52:46.006] INIT: version 2.96 booting [2025-09-24 15:52:46.118] INIT: Entering runlevel: 5 [2025-09-24 15:52:46.278] mtd32 attached [2025-09-24 15:52:46.278] mtd24 attached [2025-09-24 15:52:46.294] mtd28 attached [2025-09-24 15:52:46.342] RTNETLINK answers: File exists [2025-09-24 15:52:46.342] ubi0:dml_code is mounted. [2025-09-24 15:52:46.358] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:52:46.358] ubi1:textures is mounted. [2025-09-24 15:52:46.379] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:52:46.379] ubi2:animations is mounted. [2025-09-24 15:52:46.379] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:52:46.414] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:52:46.414] data.LB_FadeInType0=100 [2025-09-24 15:52:46.414] data.CHLH_FadeInType0=0 [2025-09-24 15:52:46.414] data.WU_FadeInDelay=0 [2025-09-24 15:52:46.414] max_time_out=0 [2025-09-24 15:52:46.414] No splash screen [2025-09-24 15:52:46.414] stop dss Done [2025-09-24 15:52:46.414] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:52:46.462] /dev/mem opened. [2025-09-24 15:52:46.462] Memory mapped at address 0xffff9fa36000. [2025-09-24 15:52:46.493] Read at address 0x00600018 (0xffff9fa36018): 0x00000000 [2025-09-24 15:52:46.493] Write at address 0x00600018 (0xffff9fa36018): 0x00400040, readback 0x00400040 [2025-09-24 15:52:46.493] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:52:46.509] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:52:46.622] Loaded PowerVR consumer services. [2025-09-24 15:52:46.718] 512+0 records in [2025-09-24 15:52:46.718] 512+0 records out [2025-09-24 15:52:46.750] Starting syslogd/klogd: Waiting data available... [2025-09-24 15:52:46.766] done [2025-09-24 15:52:46.766] DML Start [2025-09-24 15:52:46.910] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:52:47.102] DML res1: 0 [2025-09-24 15:52:47.656] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:52:47.656] Read Success [2025-09-24 15:52:47.656] Verifying certificate... [2025-09-24 15:52:47.896] Verified OK [2025-09-24 15:52:47.912] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:52:49.527] Verified OK [2025-09-24 15:52:49.527] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:52:50.191] Verified OK [2025-09-24 15:52:50.191] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:52:52.861] fs.protected_hardlinks = 1 [2025-09-24 15:52:52.877] fs.protected_symlinks = 1 [2025-09-24 15:52:52.877] kernel.modules_disabled = 1 [2025-09-24 15:52:53.068] [2025-09-24 15:52:53.068] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:52:54.281] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:53:01.960] SBL1:1210.0.1.0 [2025-09-24 15:53:01.992] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:53:03.574] SBL2:1210.0.1.0 [2025-09-24 15:53:03.606] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:53:03.718] j-A [2025-09-24 15:53:11.088] The R5 Autosar Classic is running [2025-09-24 15:53:11.088] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:53:11.088] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:53:11.696] INIT: version 2.96 booting [2025-09-24 15:53:11.807] INIT: Entering runlevel: 5 [2025-09-24 15:53:11.967] mtd32 attached [2025-09-24 15:53:11.967] mtd24 attached [2025-09-24 15:53:11.983] mtd28 attached [2025-09-24 15:53:12.031] RTNETLINK answers: File exists [2025-09-24 15:53:12.094] ubi2:animations is mounted. [2025-09-24 15:53:12.094] ubi0:dml_code is mounted. [2025-09-24 15:53:12.094] ubi1:textures is mounted. [2025-09-24 15:53:12.094] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:53:12.094] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:53:12.094] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:53:12.094] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:53:12.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:53:12.094] data.LB_FadeInType0=100 [2025-09-24 15:53:12.094] data.CHLH_FadeInType0=0 [2025-09-24 15:53:12.094] data.WU_FadeInDelay=0 [2025-09-24 15:53:12.094] max_time_out=0 [2025-09-24 15:53:12.094] No splash screen [2025-09-24 15:53:12.094] stop dss Done [2025-09-24 15:53:12.126] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:53:12.141] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:53:12.178] /dev/mem opened. [2025-09-24 15:53:12.178] Memory mapped at address 0xffff83f4a000. [2025-09-24 15:53:12.178] Read at address 0x00600018 (0xffff83f4a018): 0x00000000 [2025-09-24 15:53:12.178] Write at address 0x00600018 (0xffff83f4a018): 0x00400040, readback 0x00400040 [2025-09-24 15:53:12.370] Loaded PowerVR consumer services. [2025-09-24 15:53:12.401] Waiting data available... [2025-09-24 15:53:12.417] 512+0 records in [2025-09-24 15:53:12.417] 512+0 records out [2025-09-24 15:53:12.449] Starting syslogd/klogd: done [2025-09-24 15:53:12.482] DML Start [2025-09-24 15:53:12.658] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:53:12.882] DML res1: 0 [2025-09-24 15:53:13.359] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:53:13.359] Read Success [2025-09-24 15:53:13.359] Verifying certificate... [2025-09-24 15:53:13.583] Verified OK [2025-09-24 15:53:13.599] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:53:15.289] Verified OK [2025-09-24 15:53:15.289] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:53:15.849] Verified OK [2025-09-24 15:53:15.870] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:53:18.555] fs.protected_hardlinks = 1 [2025-09-24 15:53:18.555] fs.protected_symlinks = 1 [2025-09-24 15:53:18.571] kernel.modules_disabled = 1 [2025-09-24 15:53:18.763] [2025-09-24 15:53:18.763] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:53:19.960] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:53:27.679] SBL1:1210.0.1.0 [2025-09-24 15:53:27.711] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:53:29.294] SBL2:1210.0.1.0 [2025-09-24 15:53:29.326] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:53:29.438] j-A [2025-09-24 15:53:36.776] The R5 Autosar Classic is running [2025-09-24 15:53:36.801] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:53:36.801] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:53:37.409] INIT: version 2.96 booting [2025-09-24 15:53:37.520] INIT: Entering runlevel: 5 [2025-09-24 15:53:37.665] mtd24 attached [2025-09-24 15:53:37.680] mtd28 attached [2025-09-24 15:53:37.696] mtd32 attached [2025-09-24 15:53:37.744] ubi1:animations is mounted. [2025-09-24 15:53:37.744] RTNETLINK answers: File exists [2025-09-24 15:53:37.806] ubi0:textures is mounted. [2025-09-24 15:53:37.806] ubi2:dml_code is mounted. [2025-09-24 15:53:37.806] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:53:37.806] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:53:37.806] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:53:37.806] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:53:37.806] data.LB_FadeInType0=100 [2025-09-24 15:53:37.806] data.CHLH_FadeInType0=0 [2025-09-24 15:53:37.806] data.WU_FadeInDelay=0 [2025-09-24 15:53:37.806] max_time_out=0 [2025-09-24 15:53:37.806] No splash screen [2025-09-24 15:53:37.806] stop dss Done [2025-09-24 15:53:37.806] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:53:37.878] /dev/mem opened. [2025-09-24 15:53:37.878] Memory mapped at address 0xffff8f429000. [2025-09-24 15:53:37.878] Read at address 0x00600018 (0xffff8f429018): 0x00000000 [2025-09-24 15:53:37.878] Write at address 0x00600018 (0xffff8f429018): 0x00400040, readback 0x00400040 [2025-09-24 15:53:37.878] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:53:37.895] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:53:37.975] Loaded PowerVR consumer services. [2025-09-24 15:53:38.102] 512+0 records in [2025-09-24 15:53:38.102] 512+0 records out [2025-09-24 15:53:38.134] Waiting data available... [2025-09-24 15:53:38.150] Starting syslogd/klogd: done [2025-09-24 15:53:38.166] DML Start [2025-09-24 15:53:38.294] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:53:38.502] DML res1: 0 [2025-09-24 15:53:38.998] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:53:39.019] Read Success [2025-09-24 15:53:39.019] Verifying certificate... [2025-09-24 15:53:39.242] Verified OK [2025-09-24 15:53:39.258] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:53:40.826] Verified OK [2025-09-24 15:53:40.826] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:53:41.556] Verified OK [2025-09-24 15:53:41.556] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:53:44.258] fs.protected_hardlinks = 1 [2025-09-24 15:53:44.258] fs.protected_symlinks = 1 [2025-09-24 15:53:44.274] kernel.modules_disabled = 1 [2025-09-24 15:53:44.466] [2025-09-24 15:53:44.466] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:53:45.649] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:53:53.386] SBL1:1210.0.1.0 [2025-09-24 15:53:53.434] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:53:55.001] SBL2:1210.0.1.0 [2025-09-24 15:53:55.049] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:53:55.145] j-A [2025-09-24 15:54:02.499] The R5 Autosar Classic is running [2025-09-24 15:54:02.520] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:54:02.520] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:54:03.127] INIT: version 2.96 booting [2025-09-24 15:54:03.239] INIT: Entering runlevel: 5 [2025-09-24 15:54:03.383] mtd24 attached [2025-09-24 15:54:03.398] mtd32 attached [2025-09-24 15:54:03.430] mtd28 attached [2025-09-24 15:54:03.430] ubi0:textures is mounted. [2025-09-24 15:54:03.462] ubi1:dml_code is mounted. [2025-09-24 15:54:03.462] RTNETLINK answers: File exists [2025-09-24 15:54:03.523] ubi2:animations is mounted. [2025-09-24 15:54:03.523] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:54:03.523] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:54:03.523] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:54:03.523] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:54:03.523] data.LB_FadeInType0=100 [2025-09-24 15:54:03.523] data.CHLH_FadeInType0=0 [2025-09-24 15:54:03.523] data.WU_FadeInDelay=0 [2025-09-24 15:54:03.523] max_time_out=0 [2025-09-24 15:54:03.523] No splash screen [2025-09-24 15:54:03.523] stop dss Done [2025-09-24 15:54:03.523] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:54:03.571] /dev/mem opened. [2025-09-24 15:54:03.571] Memory mapped at address 0xffffadb48000. [2025-09-24 15:54:03.597] Read at address 0x00600018 (0xffffadb48018): 0x00000000 [2025-09-24 15:54:03.597] Write at address 0x00600018 (0xffffadb48018): 0x00400040, readback 0x00400040 [2025-09-24 15:54:03.628] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:54:03.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:54:03.804] Loaded PowerVR consumer services. [2025-09-24 15:54:03.837] 512+0 records in [2025-09-24 15:54:03.837] 512+0 records out [2025-09-24 15:54:03.868] Waiting data available... [2025-09-24 15:54:03.884] Starting syslogd/klogd: done [2025-09-24 15:54:03.900] DML Start [2025-09-24 15:54:04.061] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:54:04.300] DML res1: 0 [2025-09-24 15:54:04.773] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:54:04.773] Read Success [2025-09-24 15:54:04.773] Verifying certificate... [2025-09-24 15:54:05.013] Verified OK [2025-09-24 15:54:05.045] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:54:06.660] Verified OK [2025-09-24 15:54:06.681] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:54:07.304] Verified OK [2025-09-24 15:54:07.320] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:54:09.942] fs.protected_hardlinks = 1 [2025-09-24 15:54:09.958] fs.protected_symlinks = 1 [2025-09-24 15:54:09.958] kernel.modules_disabled = 1 [2025-09-24 15:54:10.166] [2025-09-24 15:54:10.166] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:54:11.350] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:54:19.113] SBL1:1210.0.1.0 [2025-09-24 15:54:19.161] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:54:20.727] SBL2:1210.0.1.0 [2025-09-24 15:54:20.775] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:54:20.871] j-A [2025-09-24 15:54:28.225] The R5 Autosar Classic is running [2025-09-24 15:54:28.248] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:54:28.248] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:54:28.856] INIT: version 2.96 booting [2025-09-24 15:54:28.967] INIT: Entering runlevel: 5 [2025-09-24 15:54:29.112] mtd28 attached [2025-09-24 15:54:29.128] mtd32 attached [2025-09-24 15:54:29.144] mtd24 attached [2025-09-24 15:54:29.160] ubi0:animations is mounted. [2025-09-24 15:54:29.192] RTNETLINK answers: File exists [2025-09-24 15:54:29.192] ubi1:dml_code is mounted. [2025-09-24 15:54:29.246] ubi2:textures is mounted. [2025-09-24 15:54:29.246] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:54:29.246] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:54:29.246] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:54:29.246] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:54:29.246] data.LB_FadeInType0=100 [2025-09-24 15:54:29.246] data.CHLH_FadeInType0=0 [2025-09-24 15:54:29.246] data.WU_FadeInDelay=0 [2025-09-24 15:54:29.246] max_time_out=0 [2025-09-24 15:54:29.246] No splash screen [2025-09-24 15:54:29.246] stop dss Done [2025-09-24 15:54:29.246] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:54:29.336] /dev/mem opened. [2025-09-24 15:54:29.336] Memory mapped at address 0xffff99325000. [2025-09-24 15:54:29.336] Read at address 0x00600018 (0xffff99325018): 0x00000000 [2025-09-24 15:54:29.336] Write at address 0x00600018 (0xffff99325018): 0x00400040, readback 0x00400040 [2025-09-24 15:54:29.336] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:54:29.336] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:54:29.431] Loaded PowerVR consumer services. [2025-09-24 15:54:29.559] 512+0 records in [2025-09-24 15:54:29.559] 512+0 records out [2025-09-24 15:54:29.575] Waiting data available... [2025-09-24 15:54:29.607] Starting syslogd/klogd: done [2025-09-24 15:54:29.623] DML Start [2025-09-24 15:54:29.799] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:54:30.023] DML res1: 0 [2025-09-24 15:54:30.437] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:54:30.437] Read Success [2025-09-24 15:54:30.437] Verifying certificate... [2025-09-24 15:54:30.692] Verified OK [2025-09-24 15:54:30.708] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:54:32.436] Verified OK [2025-09-24 15:54:32.436] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:54:33.004] Verified OK [2025-09-24 15:54:33.004] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:54:35.467] fs.protected_hardlinks = 1 [2025-09-24 15:54:35.467] fs.protected_symlinks = 1 [2025-09-24 15:54:35.482] kernel.modules_disabled = 1 [2025-09-24 15:54:35.674] [2025-09-24 15:54:35.674] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:54:37.145] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:54:44.833] SBL1:1210.0.1.0 [2025-09-24 15:54:44.865] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:54:46.448] SBL2:1210.0.1.0 [2025-09-24 15:54:46.480] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:54:46.592] j-A [2025-09-24 15:54:53.963] The R5 Autosar Classic is running [2025-09-24 15:54:53.963] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:54:53.963] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:54:54.571] INIT: version 2.96 booting [2025-09-24 15:54:54.682] INIT: Entering runlevel: 5 [2025-09-24 15:54:54.827] mtd24 attached [2025-09-24 15:54:54.842] mtd28 attached [2025-09-24 15:54:54.842] mtd32 attached [2025-09-24 15:54:54.890] ubi0:textures is mounted. [2025-09-24 15:54:54.906] RTNETLINK answers: File exists [2025-09-24 15:54:54.906] ubi2:dml_code is mounted. [2025-09-24 15:54:54.962] ubi1:animations is mounted. [2025-09-24 15:54:54.962] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:54:54.962] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:54:54.962] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:54:54.962] data.LB_FadeInType0=100 [2025-09-24 15:54:54.962] data.CHLH_FadeInType0=0 [2025-09-24 15:54:54.962] data.WU_FadeInDelay=0 [2025-09-24 15:54:54.962] max_time_out=0 [2025-09-24 15:54:54.962] No splash screen [2025-09-24 15:54:54.962] stop dss Done [2025-09-24 15:54:54.962] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:54:54.962] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:54:55.042] /dev/mem opened. [2025-09-24 15:54:55.042] Memory mapped at address 0xffffab49f000. [2025-09-24 15:54:55.042] Read at address 0x00600018 (0xffffab49f018): 0x00000000 [2025-09-24 15:54:55.042] Write at address 0x00600018 (0xffffab49f018): 0x00400040, readback 0x00400040 [2025-09-24 15:54:55.042] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:54:55.042] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:54:55.122] Loaded PowerVR consumer services. [2025-09-24 15:54:55.250] 512+0 records in [2025-09-24 15:54:55.250] 512+0 records out [2025-09-24 15:54:55.282] Starting syslogd/klogd: Waiting data available... [2025-09-24 15:54:55.298] done [2025-09-24 15:54:55.314] DML Start [2025-09-24 15:54:55.506] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:54:55.729] DML res1: 0 [2025-09-24 15:54:56.141] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:54:56.142] Read Success [2025-09-24 15:54:56.142] Verifying certificate... [2025-09-24 15:54:56.430] Verified OK [2025-09-24 15:54:56.446] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:54:58.247] Verified OK [2025-09-24 15:54:58.247] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:54:58.791] Verified OK [2025-09-24 15:54:58.807] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:55:01.365] fs.protected_hardlinks = 1 [2025-09-24 15:55:01.365] fs.protected_symlinks = 1 [2025-09-24 15:55:01.365] kernel.modules_disabled = 1 [2025-09-24 15:55:01.573] [2025-09-24 15:55:01.573] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:55:02.832] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:55:10.560] SBL1:1210.0.1.0 [2025-09-24 15:55:10.592] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:55:12.174] SBL2:1210.0.1.0 [2025-09-24 15:55:12.206] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:55:12.301] j-A [2025-09-24 15:55:19.655] The R5 Autosar Classic is running [2025-09-24 15:55:19.680] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:55:19.680] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:55:20.288] INIT: version 2.96 booting [2025-09-24 15:55:20.399] INIT: Entering runlevel: 5 [2025-09-24 15:55:20.560] mtd24 attached [2025-09-24 15:55:20.560] mtd28 attached [2025-09-24 15:55:20.576] mtd32 attached [2025-09-24 15:55:20.623] ubi0:textures is mounted. [2025-09-24 15:55:20.623] RTNETLINK answers: File exists [2025-09-24 15:55:20.639] ubi1:animations is mounted. [2025-09-24 15:55:20.639] ubi2:dml_code is mounted. [2025-09-24 15:55:20.639] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:55:20.688] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:55:20.688] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:55:20.688] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:55:20.688] data.LB_FadeInType0=100 [2025-09-24 15:55:20.688] data.CHLH_FadeInType0=0 [2025-09-24 15:55:20.688] data.WU_FadeInDelay=0 [2025-09-24 15:55:20.688] max_time_out=0 [2025-09-24 15:55:20.688] No splash screen [2025-09-24 15:55:20.688] stop dss Done [2025-09-24 15:55:20.688] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:55:20.769] /dev/mem opened. [2025-09-24 15:55:20.769] Memory mapped at address 0xffff8ea4f000. [2025-09-24 15:55:20.769] Read at address 0x00600018 (0xffff8ea4f018): 0x00000000 [2025-09-24 15:55:20.769] Write at address 0x00600018 (0xffff8ea4f018): 0x00400040, readback 0x00400040 [2025-09-24 15:55:20.769] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:55:20.769] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:55:20.960] Loaded PowerVR consumer services. [2025-09-24 15:55:20.992] 512+0 records in [2025-09-24 15:55:20.992] 512+0 records out [2025-09-24 15:55:21.024] Waiting data available... [2025-09-24 15:55:21.057] Starting syslogd/klogd: done [2025-09-24 15:55:21.073] DML Start [2025-09-24 15:55:21.248] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:55:21.472] DML res1: 0 [2025-09-24 15:55:21.979] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:55:21.979] Read Success [2025-09-24 15:55:21.979] Verifying certificate... [2025-09-24 15:55:22.219] Verified OK [2025-09-24 15:55:22.234] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:55:23.898] Verified OK [2025-09-24 15:55:23.914] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:55:24.510] Verified OK [2025-09-24 15:55:24.510] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:55:27.100] fs.protected_hardlinks = 1 [2025-09-24 15:55:27.100] fs.protected_symlinks = 1 [2025-09-24 15:55:27.115] kernel.modules_disabled = 1 [2025-09-24 15:55:27.307] [2025-09-24 15:55:27.307] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:55:28.571] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:55:36.299] SBL1:1210.0.1.0 [2025-09-24 15:55:36.330] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:55:37.913] SBL2:1210.0.1.0 [2025-09-24 15:55:37.945] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:55:38.040] j-A [2025-09-24 15:55:45.394] The R5 Autosar Classic is running [2025-09-24 15:55:45.419] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:55:45.419] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:55:46.026] INIT: version 2.96 booting [2025-09-24 15:55:46.138] INIT: Entering runlevel: 5 [2025-09-24 15:55:46.298] mtd24 attached [2025-09-24 15:55:46.298] mtd32 attached [2025-09-24 15:55:46.330] mtd28 attached [2025-09-24 15:55:46.346] ubi0:textures is mounted. [2025-09-24 15:55:46.362] ubi1:dml_code is mounted. [2025-09-24 15:55:46.362] RTNETLINK answers: File exists [2025-09-24 15:55:46.398] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:55:46.398] ubi2:animations is mounted. [2025-09-24 15:55:46.398] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:55:46.398] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:55:46.431] data.LB_FadeInType0=100 [2025-09-24 15:55:46.431] data.CHLH_FadeInType0=0 [2025-09-24 15:55:46.431] data.WU_FadeInDelay=0 [2025-09-24 15:55:46.431] max_time_out=0 [2025-09-24 15:55:46.431] No splash screen [2025-09-24 15:55:46.431] stop dss Done [2025-09-24 15:55:46.431] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:55:46.431] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:55:46.463] /dev/mem opened. [2025-09-24 15:55:46.463] Memory mapped at address 0xffffa3486000. [2025-09-24 15:55:46.500] Read at address 0x00600018 (0xffffa3486018): 0x00000000 [2025-09-24 15:55:46.500] Write at address 0x00600018 (0xffffa3486018): 0x00400040, readback 0x00400040 [2025-09-24 15:55:46.500] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:55:46.500] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:55:46.595] Loaded PowerVR consumer services. [2025-09-24 15:55:46.724] Waiting data available... [2025-09-24 15:55:46.739] 512+0 records in [2025-09-24 15:55:46.739] 512+0 records out [2025-09-24 15:55:46.755] Starting syslogd/klogd: done [2025-09-24 15:55:46.771] DML Start [2025-09-24 15:55:46.932] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:55:47.139] DML res1: 0 [2025-09-24 15:55:47.665] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:55:47.665] Read Success [2025-09-24 15:55:47.665] Verifying certificate... [2025-09-24 15:55:47.905] Verified OK [2025-09-24 15:55:47.920] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:55:49.504] Verified OK [2025-09-24 15:55:49.520] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:55:50.142] Verified OK [2025-09-24 15:55:50.142] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:55:52.652] fs.protected_hardlinks = 1 [2025-09-24 15:55:52.668] fs.protected_symlinks = 1 [2025-09-24 15:55:52.684] kernel.modules_disabled = 1 [2025-09-24 15:55:52.876] [2025-09-24 15:55:52.876] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:55:54.266] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:56:02.023] SBL1:1210.0.1.0 [2025-09-24 15:56:02.071] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:56:03.637] SBL2:1210.0.1.0 [2025-09-24 15:56:03.669] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:56:03.782] j-A [2025-09-24 15:56:11.135] The R5 Autosar Classic is running [2025-09-24 15:56:11.156] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:56:11.156] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:56:11.764] INIT: version 2.96 booting [2025-09-24 15:56:11.875] INIT: Entering runlevel: 5 [2025-09-24 15:56:12.035] mtd24 attached [2025-09-24 15:56:12.051] mtd32 attached [2025-09-24 15:56:12.067] ubi0:textures is mounted. [2025-09-24 15:56:12.067] mtd28 attached [2025-09-24 15:56:12.099] RTNETLINK answers: File exists [2025-09-24 15:56:12.158] ubi1:dml_code is mounted. [2025-09-24 15:56:12.158] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:56:12.158] ubi2:animations is mounted. [2025-09-24 15:56:12.158] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:56:12.158] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:56:12.158] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:56:12.158] data.LB_FadeInType0=100 [2025-09-24 15:56:12.158] data.CHLH_FadeInType0=0 [2025-09-24 15:56:12.158] data.WU_FadeInDelay=0 [2025-09-24 15:56:12.158] max_time_out=0 [2025-09-24 15:56:12.158] No splash screen [2025-09-24 15:56:12.158] stop dss Done [2025-09-24 15:56:12.158] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:56:12.206] /dev/mem opened. [2025-09-24 15:56:12.206] Memory mapped at address 0xffff9b33f000. [2025-09-24 15:56:12.232] Read at address 0x00600018 (0xffff9b33f018): 0x00000000 [2025-09-24 15:56:12.232] Write at address 0x00600018 (0xffff9b33f018): 0x00400040, readback 0x00400040 [2025-09-24 15:56:12.263] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:56:12.263] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:56:12.326] Loaded PowerVR consumer services. [2025-09-24 15:56:12.455] 512+0 records in [2025-09-24 15:56:12.455] 512+0 records out [2025-09-24 15:56:12.471] Waiting data available... [2025-09-24 15:56:12.503] Starting syslogd/klogd: done [2025-09-24 15:56:12.519] DML Start [2025-09-24 15:56:12.726] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:56:12.902] DML res1: 0 [2025-09-24 15:56:13.426] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:56:13.426] Read Success [2025-09-24 15:56:13.426] Verifying certificate... [2025-09-24 15:56:13.649] Verified OK [2025-09-24 15:56:13.665] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:56:15.370] Verified OK [2025-09-24 15:56:15.370] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:56:15.993] Verified OK [2025-09-24 15:56:15.993] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:56:18.519] fs.protected_hardlinks = 1 [2025-09-24 15:56:18.535] fs.protected_symlinks = 1 [2025-09-24 15:56:18.535] kernel.modules_disabled = 1 [2025-09-24 15:56:18.727] [2025-09-24 15:56:18.727] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:56:20.031] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:56:27.728] SBL1:1210.0.1.0 [2025-09-24 15:56:27.776] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:56:29.343] SBL2:1210.0.1.0 [2025-09-24 15:56:29.391] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:56:29.486] j-A [2025-09-24 15:56:36.841] The R5 Autosar Classic is running [2025-09-24 15:56:36.863] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:56:36.863] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:56:37.471] INIT: version 2.96 booting [2025-09-24 15:56:37.582] INIT: Entering runlevel: 5 [2025-09-24 15:56:37.726] mtd24 attached [2025-09-24 15:56:37.742] mtd28 attached [2025-09-24 15:56:37.758] mtd32 attached [2025-09-24 15:56:37.807] ubi1:animations is mounted. [2025-09-24 15:56:37.807] ubi0:textures is mounted. [2025-09-24 15:56:37.807] RTNETLINK answers: File exists [2025-09-24 15:56:37.867] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:56:37.867] ubi2:dml_code is mounted. [2025-09-24 15:56:37.867] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:56:37.867] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:56:37.867] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:56:37.867] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:56:37.867] data.LB_FadeInType0=100 [2025-09-24 15:56:37.867] data.CHLH_FadeInType0=0 [2025-09-24 15:56:37.867] data.WU_FadeInDelay=0 [2025-09-24 15:56:37.867] max_time_out=0 [2025-09-24 15:56:37.867] No splash screen [2025-09-24 15:56:37.867] stop dss Done [2025-09-24 15:56:37.946] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:56:37.946] /dev/mem opened. [2025-09-24 15:56:37.946] Memory mapped at address 0xffffa64d2000. [2025-09-24 15:56:37.946] Read at address 0x00600018 (0xffffa64d2018): 0x00000000 [2025-09-24 15:56:37.946] Write at address 0x00600018 (0xffffa64d2018): 0x00400040, readback 0x00400040 [2025-09-24 15:56:37.946] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:56:38.121] Loaded PowerVR consumer services. [2025-09-24 15:56:38.169] 512+0 records in [2025-09-24 15:56:38.169] 512+0 records out [2025-09-24 15:56:38.218] Starting syslogd/klogd: Waiting data available... [2025-09-24 15:56:38.233] done [2025-09-24 15:56:38.249] DML Start [2025-09-24 15:56:38.425] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:56:38.633] DML res1: 0 [2025-09-24 15:56:39.133] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:56:39.133] Read Success [2025-09-24 15:56:39.133] Verifying certificate... [2025-09-24 15:56:39.357] Verified OK [2025-09-24 15:56:39.357] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:56:41.116] Verified OK [2025-09-24 15:56:41.116] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:56:41.643] Verified OK [2025-09-24 15:56:41.643] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:56:44.297] fs.protected_hardlinks = 1 [2025-09-24 15:56:44.328] fs.protected_symlinks = 1 [2025-09-24 15:56:44.328] kernel.modules_disabled = 1 [2025-09-24 15:56:44.520] [2025-09-24 15:56:44.520] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:56:45.750] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:56:53.450] SBL1:1210.0.1.0 [2025-09-24 15:56:53.498] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:56:55.066] SBL2:1210.0.1.0 [2025-09-24 15:56:55.114] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:56:55.209] j-A [2025-09-24 15:57:02.565] The R5 Autosar Classic is running [2025-09-24 15:57:02.587] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:57:02.587] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:57:03.194] INIT: version 2.96 booting [2025-09-24 15:57:03.307] INIT: Entering runlevel: 5 [2025-09-24 15:57:03.467] mtd32 attached [2025-09-24 15:57:03.467] mtd24 attached [2025-09-24 15:57:03.482] mtd28 attached [2025-09-24 15:57:03.565] RTNETLINK answers: File exists [2025-09-24 15:57:03.565] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:57:03.565] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:57:03.565] ubi0:dml_code is mounted. [2025-09-24 15:57:03.565] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:57:03.565] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:57:03.565] ubi1:textures is mounted. [2025-09-24 15:57:03.565] ubi2:animations is mounted. [2025-09-24 15:57:03.565] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:57:03.596] data.LB_FadeInType0=100 [2025-09-24 15:57:03.596] data.CHLH_FadeInType0=0 [2025-09-24 15:57:03.596] data.WU_FadeInDelay=0 [2025-09-24 15:57:03.596] max_time_out=0 [2025-09-24 15:57:03.596] No splash screen [2025-09-24 15:57:03.596] stop dss Done [2025-09-24 15:57:03.612] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:57:03.612] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:57:03.669] /dev/mem opened. [2025-09-24 15:57:03.669] Memory mapped at address 0xffffaeeea000. [2025-09-24 15:57:03.669] Read at address 0x00600018 (0xffffaeeea018): 0x00000000 [2025-09-24 15:57:03.669] Write at address 0x00600018 (0xffffaeeea018): 0x00400040, readback 0x00400040 [2025-09-24 15:57:03.860] Loaded PowerVR consumer services. [2025-09-24 15:57:03.915] Waiting data available... [2025-09-24 15:57:03.915] 512+0 records in [2025-09-24 15:57:03.915] 512+0 records out [2025-09-24 15:57:03.947] Starting syslogd/klogd: done [2025-09-24 15:57:03.963] DML Start [2025-09-24 15:57:04.123] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:57:04.347] DML res1: 0 [2025-09-24 15:57:04.804] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:57:04.804] Read Success [2025-09-24 15:57:04.804] Verifying certificate... [2025-09-24 15:57:05.044] Verified OK [2025-09-24 15:57:05.060] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:57:06.744] Verified OK [2025-09-24 15:57:06.744] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:57:07.414] Verified OK [2025-09-24 15:57:07.414] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:57:10.036] fs.protected_hardlinks = 1 [2025-09-24 15:57:10.052] fs.protected_symlinks = 1 [2025-09-24 15:57:10.068] kernel.modules_disabled = 1 [2025-09-24 15:57:10.260] [2025-09-24 15:57:10.260] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:57:11.485] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:57:19.183] SBL1:1210.0.1.0 [2025-09-24 15:57:19.214] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:57:20.797] SBL2:1210.0.1.0 [2025-09-24 15:57:20.829] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:57:20.925] j-A [2025-09-24 15:57:28.280] The R5 Autosar Classic is running [2025-09-24 15:57:28.305] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:57:28.305] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:57:28.913] INIT: version 2.96 booting [2025-09-24 15:57:29.024] INIT: Entering runlevel: 5 [2025-09-24 15:57:29.184] mtd24 attached [2025-09-24 15:57:29.200] mtd28 attached [2025-09-24 15:57:29.216] mtd32 attached [2025-09-24 15:57:29.248] ubi1:animations is mounted. [2025-09-24 15:57:29.248] ubi0:textures is mounted. [2025-09-24 15:57:29.264] RTNETLINK answers: File exists [2025-09-24 15:57:29.318] ubi2:dml_code is mounted. [2025-09-24 15:57:29.318] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:57:29.318] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:57:29.318] data.LB_FadeInType0=100 [2025-09-24 15:57:29.318] data.CHLH_FadeInType0=0 [2025-09-24 15:57:29.318] data.WU_FadeInDelay=0 [2025-09-24 15:57:29.318] max_time_out=0 [2025-09-24 15:57:29.318] No splash screen [2025-09-24 15:57:29.318] stop dss Done [2025-09-24 15:57:29.318] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:57:29.318] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:57:29.334] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:57:29.389] /dev/mem opened. [2025-09-24 15:57:29.389] Memory mapped at address 0xffffb2711000. [2025-09-24 15:57:29.389] Read at address 0x00600018 (0xffffb2711018): 0x00000000 [2025-09-24 15:57:29.389] Write at address 0x00600018 (0xffffb2711018): 0x00400040, readback 0x00400040 [2025-09-24 15:57:29.450] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:57:29.450] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:57:29.594] Loaded PowerVR consumer services. [2025-09-24 15:57:29.652] Waiting data available... [2025-09-24 15:57:29.652] 512+0 records in [2025-09-24 15:57:29.652] 512+0 records out [2025-09-24 15:57:29.684] Starting syslogd/klogd: done [2025-09-24 15:57:29.700] DML Start [2025-09-24 15:57:29.877] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:57:30.100] DML res1: 0 [2025-09-24 15:57:30.548] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:57:30.564] Read Success [2025-09-24 15:57:30.564] Verifying certificate... [2025-09-24 15:57:30.820] Verified OK [2025-09-24 15:57:30.836] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:57:32.592] Verified OK [2025-09-24 15:57:32.592] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:57:33.206] Verified OK [2025-09-24 15:57:33.206] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:57:35.826] fs.protected_hardlinks = 1 [2025-09-24 15:57:35.826] fs.protected_symlinks = 1 [2025-09-24 15:57:35.826] kernel.modules_disabled = 1 [2025-09-24 15:57:36.017] [2025-09-24 15:57:36.017] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:57:37.196] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:57:44.885] SBL1:1210.0.1.0 [2025-09-24 15:57:44.933] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:57:46.499] SBL2:1210.0.1.0 [2025-09-24 15:57:46.547] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:57:46.644] j-A [2025-09-24 15:57:53.998] The R5 Autosar Classic is running [2025-09-24 15:57:53.998] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:57:54.019] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:57:54.628] INIT: version 2.96 booting [2025-09-24 15:57:54.739] INIT: Entering runlevel: 5 [2025-09-24 15:57:54.899] mtd28 attached [2025-09-24 15:57:54.899] mtd32 attached [2025-09-24 15:57:54.914] mtd24 attached [2025-09-24 15:57:54.947] ubi0:animations is mounted. [2025-09-24 15:57:54.963] RTNETLINK answers: File exists [2025-09-24 15:57:55.027] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:57:55.027] ubi2:textures is mounted. [2025-09-24 15:57:55.027] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:57:55.027] ubi1:dml_code is mounted. [2025-09-24 15:57:55.027] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:57:55.027] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:57:55.027] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:57:55.027] data.LB_FadeInType0=100 [2025-09-24 15:57:55.027] data.CHLH_FadeInType0=0 [2025-09-24 15:57:55.027] data.WU_FadeInDelay=0 [2025-09-24 15:57:55.027] max_time_out=0 [2025-09-24 15:57:55.027] No splash screen [2025-09-24 15:57:55.027] stop dss Done [2025-09-24 15:57:55.091] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:57:55.129] /dev/mem opened. [2025-09-24 15:57:55.129] Memory mapped at address 0xffff9a7a2000. [2025-09-24 15:57:55.129] Read at address 0x00600018 (0xffff9a7a2018): 0x00000000 [2025-09-24 15:57:55.129] Write at address 0x00600018 (0xffff9a7a2018): 0x00400040, readback 0x00400040 [2025-09-24 15:57:55.129] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:57:55.192] Loaded PowerVR consumer services. [2025-09-24 15:57:55.304] 512+0 records in [2025-09-24 15:57:55.304] 512+0 records out [2025-09-24 15:57:55.336] Starting syslogd/klogd: Waiting data available... [2025-09-24 15:57:55.353] done [2025-09-24 15:57:55.369] DML Start [2025-09-24 15:57:55.560] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:57:55.784] DML res1: 0 [2025-09-24 15:57:56.273] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:57:56.273] Read Success [2025-09-24 15:57:56.273] Verifying certificate... [2025-09-24 15:57:56.561] Verified OK [2025-09-24 15:57:56.577] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:57:58.301] Verified OK [2025-09-24 15:57:58.301] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:57:58.946] Verified OK [2025-09-24 15:57:58.946] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:58:01.599] fs.protected_hardlinks = 1 [2025-09-24 15:58:01.615] fs.protected_symlinks = 1 [2025-09-24 15:58:01.615] kernel.modules_disabled = 1 [2025-09-24 15:58:01.822] [2025-09-24 15:58:01.822] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:58:02.887] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:58:10.614] SBL1:1210.0.1.0 [2025-09-24 15:58:10.646] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:58:12.228] SBL2:1210.0.1.0 [2025-09-24 15:58:12.260] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:58:12.372] j-A [2025-09-24 15:58:19.744] The R5 Autosar Classic is running [2025-09-24 15:58:19.744] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:58:19.744] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:58:20.352] INIT: version 2.96 booting [2025-09-24 15:58:20.479] INIT: Entering runlevel: 5 [2025-09-24 15:58:20.623] mtd32 attached [2025-09-24 15:58:20.639] mtd28 attached [2025-09-24 15:58:20.639] mtd24 attached [2025-09-24 15:58:20.671] ubi0:dml_code is mounted. [2025-09-24 15:58:20.703] RTNETLINK answers: File exists [2025-09-24 15:58:20.753] ubi1:animations is mounted. [2025-09-24 15:58:20.753] ubi2:textures is mounted. [2025-09-24 15:58:20.753] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:58:20.753] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:58:20.753] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:58:20.753] data.LB_FadeInType0=100 [2025-09-24 15:58:20.753] data.CHLH_FadeInType0=0 [2025-09-24 15:58:20.753] data.WU_FadeInDelay=0 [2025-09-24 15:58:20.753] max_time_out=0 [2025-09-24 15:58:20.753] No splash screen [2025-09-24 15:58:20.753] stop dss Done [2025-09-24 15:58:20.753] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:58:20.753] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:58:20.786] /dev/mem opened. [2025-09-24 15:58:20.816] Memory mapped at address 0xffff922c8000. [2025-09-24 15:58:20.816] Read at address 0x00600018 (0xffff922c8018): 0x00000000 [2025-09-24 15:58:20.816] Write at address 0x00600018 (0xffff922c8018): 0x00400040, readback 0x00400040 [2025-09-24 15:58:20.848] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:58:20.864] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:58:21.040] Loaded PowerVR consumer services. [2025-09-24 15:58:21.072] 512+0 records in [2025-09-24 15:58:21.072] 512+0 records out [2025-09-24 15:58:21.072] Waiting data available... [2025-09-24 15:58:21.119] Starting syslogd/klogd: done [2025-09-24 15:58:21.135] DML Start [2025-09-24 15:58:21.295] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:58:21.535] DML res1: 0 [2025-09-24 15:58:22.024] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:58:22.024] Read Success [2025-09-24 15:58:22.024] Verifying certificate... [2025-09-24 15:58:22.281] Verified OK [2025-09-24 15:58:22.296] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:58:23.940] Verified OK [2025-09-24 15:58:23.940] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:58:24.559] Verified OK [2025-09-24 15:58:24.559] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:58:27.149] fs.protected_hardlinks = 1 [2025-09-24 15:58:27.177] fs.protected_symlinks = 1 [2025-09-24 15:58:27.177] kernel.modules_disabled = 1 [2025-09-24 15:58:27.352] [2025-09-24 15:58:27.352] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:58:28.633] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:58:36.322] SBL1:1210.0.1.0 [2025-09-24 15:58:36.370] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:58:37.937] SBL2:1210.0.1.0 [2025-09-24 15:58:37.969] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:58:38.081] j-A [2025-09-24 15:58:45.436] The R5 Autosar Classic is running [2025-09-24 15:58:45.436] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:58:45.457] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:58:46.065] INIT: version 2.96 booting [2025-09-24 15:58:46.177] INIT: Entering runlevel: 5 [2025-09-24 15:58:46.321] mtd24 attached [2025-09-24 15:58:46.336] mtd32 attached [2025-09-24 15:58:46.352] mtd28 attached [2025-09-24 15:58:46.384] ubi0:textures is mounted. [2025-09-24 15:58:46.400] ubi1:dml_code is mounted. [2025-09-24 15:58:46.464] ubi2:animations is mounted. [2025-09-24 15:58:46.464] RTNETLINK answers: File exists [2025-09-24 15:58:46.464] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:58:46.464] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:58:46.464] data.LB_FadeInType0=100 [2025-09-24 15:58:46.464] data.CHLH_FadeInType0=0 [2025-09-24 15:58:46.464] data.WU_FadeInDelay=0 [2025-09-24 15:58:46.464] max_time_out=0 [2025-09-24 15:58:46.464] No splash screen [2025-09-24 15:58:46.464] stop dss Done [2025-09-24 15:58:46.464] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:58:46.464] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:58:46.464] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:58:46.496] /dev/mem opened. [2025-09-24 15:58:46.496] Memory mapped at address 0xffffb0511000. [2025-09-24 15:58:46.522] Read at address 0x00600018 (0xffffb0511018): 0x00000000 [2025-09-24 15:58:46.522] Write at address 0x00600018 (0xffffb0511018): 0x00400040, readback 0x00400040 [2025-09-24 15:58:46.567] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:58:46.567] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:58:46.726] Loaded PowerVR consumer services. [2025-09-24 15:58:46.775] 512+0 records in [2025-09-24 15:58:46.775] 512+0 records out [2025-09-24 15:58:46.807] Waiting data available... [2025-09-24 15:58:46.823] Starting syslogd/klogd: done [2025-09-24 15:58:46.838] DML Start [2025-09-24 15:58:47.047] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:58:47.254] DML res1: 0 [2025-09-24 15:58:47.695] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:58:47.695] Read Success [2025-09-24 15:58:47.695] Verifying certificate... [2025-09-24 15:58:47.951] Verified OK [2025-09-24 15:58:47.967] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:58:49.703] Verified OK [2025-09-24 15:58:49.703] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:58:50.348] Verified OK [2025-09-24 15:58:50.348] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:58:53.018] fs.protected_hardlinks = 1 [2025-09-24 15:58:53.045] fs.protected_symlinks = 1 [2025-09-24 15:58:53.045] kernel.modules_disabled = 1 [2025-09-24 15:58:53.220] [2025-09-24 15:58:53.220] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:58:54.367] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:59:02.046] SBL1:1210.0.1.0 [2025-09-24 15:59:02.078] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:59:03.661] SBL2:1210.0.1.0 [2025-09-24 15:59:03.693] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:59:03.805] j-A [2025-09-24 15:59:11.143] The R5 Autosar Classic is running [2025-09-24 15:59:11.175] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:59:11.175] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:59:11.782] INIT: version 2.96 booting [2025-09-24 15:59:11.894] INIT: Entering runlevel: 5 [2025-09-24 15:59:12.054] mtd24 attached [2025-09-24 15:59:12.054] mtd28 attached [2025-09-24 15:59:12.086] mtd32 attached [2025-09-24 15:59:12.086] ubi0:textures is mounted. [2025-09-24 15:59:12.118] ubi1:animations is mounted. [2025-09-24 15:59:12.134] RTNETLINK answers: File exists [2025-09-24 15:59:12.134] ubi2:dml_code is mounted. [2025-09-24 15:59:12.184] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:59:12.184] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:59:12.184] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:59:12.184] data.LB_FadeInType0=100 [2025-09-24 15:59:12.184] data.CHLH_FadeInType0=0 [2025-09-24 15:59:12.184] data.WU_FadeInDelay=0 [2025-09-24 15:59:12.184] max_time_out=0 [2025-09-24 15:59:12.184] No splash screen [2025-09-24 15:59:12.184] stop dss Done [2025-09-24 15:59:12.184] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:59:12.184] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:59:12.238] /dev/mem opened. [2025-09-24 15:59:12.238] Memory mapped at address 0xffff8e2c3000. [2025-09-24 15:59:12.238] Read at address 0x00600018 (0xffff8e2c3018): 0x00000000 [2025-09-24 15:59:12.238] Write at address 0x00600018 (0xffff8e2c3018): 0x00400040, readback 0x00400040 [2025-09-24 15:59:12.314] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:59:12.314] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:59:12.458] Loaded PowerVR consumer services. [2025-09-24 15:59:12.490] 512+0 records in [2025-09-24 15:59:12.490] 512+0 records out [2025-09-24 15:59:12.522] Starting syslogd/klogd: Waiting data available... [2025-09-24 15:59:12.538] done [2025-09-24 15:59:12.553] DML Start [2025-09-24 15:59:12.697] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:59:12.873] DML res1: 0 [2025-09-24 15:59:13.425] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:59:13.425] Read Success [2025-09-24 15:59:13.425] Verifying certificate... [2025-09-24 15:59:13.649] Verified OK [2025-09-24 15:59:13.681] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:59:15.486] Verified OK [2025-09-24 15:59:15.486] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:59:16.014] Verified OK [2025-09-24 15:59:16.014] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:59:18.572] fs.protected_hardlinks = 1 [2025-09-24 15:59:18.572] fs.protected_symlinks = 1 [2025-09-24 15:59:18.588] kernel.modules_disabled = 1 [2025-09-24 15:59:18.780] [2025-09-24 15:59:18.780] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:59:20.038] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:59:27.760] SBL1:1210.0.1.0 [2025-09-24 15:59:27.791] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:59:29.375] SBL2:1210.0.1.0 [2025-09-24 15:59:29.407] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:59:29.519] j-A [2025-09-24 15:59:36.857] The R5 Autosar Classic is running [2025-09-24 15:59:36.887] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 15:59:36.887] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 15:59:37.496] INIT: version 2.96 booting [2025-09-24 15:59:37.607] INIT: Entering runlevel: 5 [2025-09-24 15:59:37.767] mtd24 attached [2025-09-24 15:59:37.767] mtd28 attached [2025-09-24 15:59:37.783] mtd32 attached [2025-09-24 15:59:37.831] RTNETLINK answers: File exists [2025-09-24 15:59:37.831] ubi0:textures is mounted. [2025-09-24 15:59:37.889] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 15:59:37.889] ubi2:dml_code is mounted. [2025-09-24 15:59:37.889] ubi1:animations is mounted. [2025-09-24 15:59:37.889] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 15:59:37.889] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 15:59:37.889] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 15:59:37.889] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 15:59:37.889] data.LB_FadeInType0=100 [2025-09-24 15:59:37.889] data.CHLH_FadeInType0=0 [2025-09-24 15:59:37.889] data.WU_FadeInDelay=0 [2025-09-24 15:59:37.889] max_time_out=0 [2025-09-24 15:59:37.889] No splash screen [2025-09-24 15:59:37.889] stop dss Done [2025-09-24 15:59:37.921] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 15:59:37.955] /dev/mem opened. [2025-09-24 15:59:37.955] Memory mapped at address 0xffffa360d000. [2025-09-24 15:59:37.955] Read at address 0x00600018 (0xffffa360d018): 0x00000000 [2025-09-24 15:59:37.955] Write at address 0x00600018 (0xffffa360d018): 0x00400040, readback 0x00400040 [2025-09-24 15:59:37.955] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 15:59:38.067] Loaded PowerVR consumer services. [2025-09-24 15:59:38.216] 512+0 records in [2025-09-24 15:59:38.216] 512+0 records out [2025-09-24 15:59:38.216] Waiting data available... [2025-09-24 15:59:38.249] Starting syslogd/klogd: done [2025-09-24 15:59:38.280] DML Start [2025-09-24 15:59:38.439] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 15:59:38.680] DML res1: 0 [2025-09-24 15:59:39.139] Read DML Algo certificate (mtd31) and save to file [2025-09-24 15:59:39.139] Read Success [2025-09-24 15:59:39.139] Verifying certificate... [2025-09-24 15:59:39.426] Verified OK [2025-09-24 15:59:39.442] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 15:59:41.120] Verified OK [2025-09-24 15:59:41.120] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 15:59:41.613] Verified OK [2025-09-24 15:59:41.613] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 15:59:44.091] fs.protected_hardlinks = 1 [2025-09-24 15:59:44.107] fs.protected_symlinks = 1 [2025-09-24 15:59:44.107] kernel.modules_disabled = 1 [2025-09-24 15:59:44.299] [2025-09-24 15:59:44.299] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 15:59:45.820] RTNETLINK answers: Cannot assign requested address [2025-09-24 15:59:53.469] SBL1:1210.0.1.0 [2025-09-24 15:59:53.501] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:59:55.084] SBL2:1210.0.1.0 [2025-09-24 15:59:55.116] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 15:59:55.228] j-A [2025-09-24 16:00:02.598] The R5 Autosar Classic is running [2025-09-24 16:00:02.598] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:00:02.598] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:00:03.205] INIT: version 2.96 booting [2025-09-24 16:00:03.302] INIT: Entering runlevel: 5 [2025-09-24 16:00:03.461] mtd24 attached [2025-09-24 16:00:03.477] mtd28 attached [2025-09-24 16:00:03.509] mtd32 attached [2025-09-24 16:00:03.526] ubi0:textures is mounted. [2025-09-24 16:00:03.526] ubi1:animations is mounted. [2025-09-24 16:00:03.542] RTNETLINK answers: File exists [2025-09-24 16:00:03.558] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:00:03.558] ubi2:dml_code is mounted. [2025-09-24 16:00:03.604] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:00:03.604] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:00:03.604] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:00:03.604] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:00:03.605] data.LB_FadeInType0=100 [2025-09-24 16:00:03.605] data.CHLH_FadeInType0=0 [2025-09-24 16:00:03.605] data.WU_FadeInDelay=0 [2025-09-24 16:00:03.605] max_time_out=0 [2025-09-24 16:00:03.605] No splash screen [2025-09-24 16:00:03.605] stop dss Done [2025-09-24 16:00:03.681] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:00:03.681] /dev/mem opened. [2025-09-24 16:00:03.681] Memory mapped at address 0xffffa3b2b000. [2025-09-24 16:00:03.681] Read at address 0x00600018 (0xffffa3b2b018): 0x00000000 [2025-09-24 16:00:03.681] Write at address 0x00600018 (0xffffa3b2b018): 0x00400040, readback 0x00400040 [2025-09-24 16:00:03.681] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:00:03.840] Loaded PowerVR consumer services. [2025-09-24 16:00:03.905] 512+0 records in [2025-09-24 16:00:03.921] 512+0 records out [2025-09-24 16:00:03.937] Starting syslogd/klogd: Waiting data available... [2025-09-24 16:00:03.953] done [2025-09-24 16:00:03.953] DML Start [2025-09-24 16:00:04.113] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:00:04.289] DML res1: 0 [2025-09-24 16:00:04.846] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:00:04.846] Read Success [2025-09-24 16:00:04.846] Verifying certificate... [2025-09-24 16:00:05.070] Verified OK [2025-09-24 16:00:05.086] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:00:06.808] Verified OK [2025-09-24 16:00:06.808] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:00:07.367] Verified OK [2025-09-24 16:00:07.367] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:00:09.973] fs.protected_hardlinks = 1 [2025-09-24 16:00:09.973] fs.protected_symlinks = 1 [2025-09-24 16:00:09.989] kernel.modules_disabled = 1 [2025-09-24 16:00:10.180] [2025-09-24 16:00:10.180] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:00:11.465] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:00:19.164] SBL1:1210.0.1.0 [2025-09-24 16:00:19.211] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:00:20.794] SBL2:1210.0.1.0 [2025-09-24 16:00:20.826] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:00:20.922] j-A [2025-09-24 16:00:28.276] The R5 Autosar Classic is running [2025-09-24 16:00:28.301] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:00:28.301] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:00:28.908] INIT: version 2.96 booting [2025-09-24 16:00:29.020] INIT: Entering runlevel: 5 [2025-09-24 16:00:29.180] mtd28 attached [2025-09-24 16:00:29.180] mtd24 attached [2025-09-24 16:00:29.196] mtd32 attached [2025-09-24 16:00:29.244] ubi0:animations is mounted. [2025-09-24 16:00:29.244] ubi1:textures is mounted. [2025-09-24 16:00:29.305] RTNETLINK answers: File exists [2025-09-24 16:00:29.305] ubi2:dml_code is mounted. [2025-09-24 16:00:29.305] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:00:29.305] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:00:29.305] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:00:29.305] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:00:29.305] data.LB_FadeInType0=100 [2025-09-24 16:00:29.305] data.CHLH_FadeInType0=0 [2025-09-24 16:00:29.305] data.WU_FadeInDelay=0 [2025-09-24 16:00:29.305] max_time_out=0 [2025-09-24 16:00:29.305] No splash screen [2025-09-24 16:00:29.305] stop dss Done [2025-09-24 16:00:29.305] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:00:29.373] /dev/mem opened. [2025-09-24 16:00:29.373] Memory mapped at address 0xffffabeb1000. [2025-09-24 16:00:29.373] Read at address 0x00600018 (0xffffabeb1018): 0x00000000 [2025-09-24 16:00:29.373] Write at address 0x00600018 (0xffffabeb1018): 0x00400040, readback 0x00400040 [2025-09-24 16:00:29.373] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:00:29.373] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:00:29.501] Loaded PowerVR consumer services. [2025-09-24 16:00:29.613] Waiting data available... [2025-09-24 16:00:29.628] 512+0 records in [2025-09-24 16:00:29.628] 512+0 records out [2025-09-24 16:00:29.660] Starting syslogd/klogd: done [2025-09-24 16:00:29.692] DML Start [2025-09-24 16:00:29.869] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:00:30.108] DML res1: 0 [2025-09-24 16:00:30.520] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:00:30.520] Read Success [2025-09-24 16:00:30.520] Verifying certificate... [2025-09-24 16:00:30.776] Verified OK [2025-09-24 16:00:30.808] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:00:32.535] Verified OK [2025-09-24 16:00:32.535] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:00:33.126] Verified OK [2025-09-24 16:00:33.126] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:00:35.667] fs.protected_hardlinks = 1 [2025-09-24 16:00:35.667] fs.protected_symlinks = 1 [2025-09-24 16:00:35.667] kernel.modules_disabled = 1 [2025-09-24 16:00:35.844] [2025-09-24 16:00:35.844] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:00:37.201] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:00:44.885] SBL1:1210.0.1.0 [2025-09-24 16:00:44.917] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:00:46.499] SBL2:1210.0.1.0 [2025-09-24 16:00:46.531] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:00:46.627] j-A [2025-09-24 16:00:53.981] The R5 Autosar Classic is running [2025-09-24 16:00:54.006] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:00:54.006] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:00:54.614] INIT: version 2.96 booting [2025-09-24 16:00:54.726] INIT: Entering runlevel: 5 [2025-09-24 16:00:54.886] mtd28 attached [2025-09-24 16:00:54.886] mtd24 attached [2025-09-24 16:00:54.902] mtd32 attached [2025-09-24 16:00:54.950] RTNETLINK answers: File exists [2025-09-24 16:00:54.994] ubi0:animations is mounted. [2025-09-24 16:00:54.994] ubi1:textures is mounted. [2025-09-24 16:00:54.994] ubi2:dml_code is mounted. [2025-09-24 16:00:54.994] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:00:54.994] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:00:54.994] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:00:54.994] data.LB_FadeInType0=100 [2025-09-24 16:00:54.994] data.CHLH_FadeInType0=0 [2025-09-24 16:00:55.025] data.WU_FadeInDelay=0 [2025-09-24 16:00:55.025] max_time_out=0 [2025-09-24 16:00:55.025] No splash screen [2025-09-24 16:00:55.025] stop dss Done [2025-09-24 16:00:55.025] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:00:55.025] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:00:55.056] /dev/mem opened. [2025-09-24 16:00:55.056] Memory mapped at address 0xffff8edc1000. [2025-09-24 16:00:55.093] Read at address 0x00600018 (0xffff8edc1018): 0x00000000 [2025-09-24 16:00:55.093] Write at address 0x00600018 (0xffff8edc1018): 0x00400040, readback 0x00400040 [2025-09-24 16:00:55.093] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:00:55.125] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:00:55.220] Loaded PowerVR consumer services. [2025-09-24 16:00:55.343] Waiting data available... [2025-09-24 16:00:55.343] 512+0 records in [2025-09-24 16:00:55.343] 512+0 records out [2025-09-24 16:00:55.375] Starting syslogd/klogd: done [2025-09-24 16:00:55.407] DML Start [2025-09-24 16:00:55.583] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:00:55.823] DML res1: 0 [2025-09-24 16:00:56.284] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:00:56.284] Read Success [2025-09-24 16:00:56.284] Verifying certificate... [2025-09-24 16:00:56.540] Verified OK [2025-09-24 16:00:56.540] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:00:58.186] Verified OK [2025-09-24 16:00:58.186] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:00:58.793] Verified OK [2025-09-24 16:00:58.793] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:01:01.287] fs.protected_hardlinks = 1 [2025-09-24 16:01:01.303] fs.protected_symlinks = 1 [2025-09-24 16:01:01.319] kernel.modules_disabled = 1 [2025-09-24 16:01:01.511] [2025-09-24 16:01:01.511] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:01:02.901] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:01:10.595] SBL1:1210.0.1.0 [2025-09-24 16:01:10.627] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:01:12.210] SBL2:1210.0.1.0 [2025-09-24 16:01:12.242] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:01:12.353] j-A [2025-09-24 16:01:19.725] The R5 Autosar Classic is running [2025-09-24 16:01:19.725] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:01:19.725] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:01:20.332] INIT: version 2.96 booting [2025-09-24 16:01:20.445] INIT: Entering runlevel: 5 [2025-09-24 16:01:20.588] mtd24 attached [2025-09-24 16:01:20.604] mtd28 attached [2025-09-24 16:01:20.620] mtd32 attached [2025-09-24 16:01:20.716] RTNETLINK answers: File exists [2025-09-24 16:01:20.716] ubi1:animations is mounted. [2025-09-24 16:01:20.716] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:01:20.716] ubi0:textures is mounted. [2025-09-24 16:01:20.716] ubi2:dml_code is mounted. [2025-09-24 16:01:20.716] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:01:20.716] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:01:20.716] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:01:20.716] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:01:20.716] data.LB_FadeInType0=100 [2025-09-24 16:01:20.716] data.CHLH_FadeInType0=0 [2025-09-24 16:01:20.716] data.WU_FadeInDelay=0 [2025-09-24 16:01:20.716] max_time_out=0 [2025-09-24 16:01:20.716] No splash screen [2025-09-24 16:01:20.716] stop dss Done [2025-09-24 16:01:20.759] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:01:20.759] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:01:20.792] /dev/mem opened. [2025-09-24 16:01:20.792] Memory mapped at address 0xffffaf90a000. [2025-09-24 16:01:20.792] Read at address 0x00600018 (0xffffaf90a018): 0x00000000 [2025-09-24 16:01:20.792] Write at address 0x00600018 (0xffffaf90a018): 0x00400040, readback 0x00400040 [2025-09-24 16:01:20.920] Loaded PowerVR consumer services. [2025-09-24 16:01:21.032] Waiting data available... [2025-09-24 16:01:21.032] 512+0 records in [2025-09-24 16:01:21.032] 512+0 records out [2025-09-24 16:01:21.080] Starting syslogd/klogd: done [2025-09-24 16:01:21.112] DML Start [2025-09-24 16:01:21.320] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:01:21.544] DML res1: 0 [2025-09-24 16:01:21.938] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:01:21.938] Read Success [2025-09-24 16:01:21.938] Verifying certificate... [2025-09-24 16:01:22.194] Verified OK [2025-09-24 16:01:22.226] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:01:23.809] Verified OK [2025-09-24 16:01:23.809] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:01:24.457] Verified OK [2025-09-24 16:01:24.457] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:01:27.238] fs.protected_hardlinks = 1 [2025-09-24 16:01:27.238] fs.protected_symlinks = 1 [2025-09-24 16:01:27.254] kernel.modules_disabled = 1 [2025-09-24 16:01:27.446] [2025-09-24 16:01:27.446] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:01:28.612] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:01:36.308] SBL1:1210.0.1.0 [2025-09-24 16:01:36.340] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:01:37.922] SBL2:1210.0.1.0 [2025-09-24 16:01:37.954] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:01:38.067] j-A [2025-09-24 16:01:45.436] The R5 Autosar Classic is running [2025-09-24 16:01:45.436] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:01:45.436] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:01:46.043] INIT: version 2.96 booting [2025-09-24 16:01:46.155] INIT: Entering runlevel: 5 [2025-09-24 16:01:46.299] mtd24 attached [2025-09-24 16:01:46.315] mtd28 attached [2025-09-24 16:01:46.331] mtd32 attached [2025-09-24 16:01:46.363] ubi0:textures is mounted. [2025-09-24 16:01:46.379] RTNETLINK answers: File exists [2025-09-24 16:01:46.418] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:01:46.418] ubi1:animations is mounted. [2025-09-24 16:01:46.418] ubi2:dml_code is mounted. [2025-09-24 16:01:46.418] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:01:46.418] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:01:46.418] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:01:46.418] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:01:46.439] data.LB_FadeInType0=100 [2025-09-24 16:01:46.439] data.CHLH_FadeInType0=0 [2025-09-24 16:01:46.439] data.WU_FadeInDelay=0 [2025-09-24 16:01:46.439] max_time_out=0 [2025-09-24 16:01:46.439] No splash screen [2025-09-24 16:01:46.439] stop dss Done [2025-09-24 16:01:46.471] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:01:46.519] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:01:46.519] /dev/mem opened. [2025-09-24 16:01:46.519] Memory mapped at address 0xffff97cf4000. [2025-09-24 16:01:46.519] Read at address 0x00600018 (0xffff97cf4018): 0x00000000 [2025-09-24 16:01:46.519] Write at address 0x00600018 (0xffff97cf4018): 0x00400040, readback 0x00400040 [2025-09-24 16:01:46.616] Loaded PowerVR consumer services. [2025-09-24 16:01:46.772] Waiting data available... [2025-09-24 16:01:46.772] 512+0 records in [2025-09-24 16:01:46.772] 512+0 records out [2025-09-24 16:01:46.788] Starting syslogd/klogd: done [2025-09-24 16:01:46.804] DML Start [2025-09-24 16:01:47.011] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:01:47.235] DML res1: 0 [2025-09-24 16:01:47.667] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:01:47.688] Read Success [2025-09-24 16:01:47.688] Verifying certificate... [2025-09-24 16:01:47.896] Verified OK [2025-09-24 16:01:47.912] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:01:49.589] Verified OK [2025-09-24 16:01:49.589] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:01:50.242] Verified OK [2025-09-24 16:01:50.242] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:01:52.832] fs.protected_hardlinks = 1 [2025-09-24 16:01:52.832] fs.protected_symlinks = 1 [2025-09-24 16:01:52.848] kernel.modules_disabled = 1 [2025-09-24 16:01:53.056] [2025-09-24 16:01:53.056] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:01:54.328] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:02:02.025] SBL1:1210.0.1.0 [2025-09-24 16:02:02.073] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:02:03.640] SBL2:1210.0.1.0 [2025-09-24 16:02:03.671] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:02:03.784] j-A [2025-09-24 16:02:11.158] The R5 Autosar Classic is running [2025-09-24 16:02:11.158] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:02:11.158] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:02:11.766] INIT: version 2.96 booting [2025-09-24 16:02:11.861] INIT: Entering runlevel: 5 [2025-09-24 16:02:12.022] mtd24 attached [2025-09-24 16:02:12.022] mtd28 attached [2025-09-24 16:02:12.038] mtd32 attached [2025-09-24 16:02:12.086] ubi0:textures is mounted. [2025-09-24 16:02:12.086] RTNETLINK answers: File exists [2025-09-24 16:02:12.102] ubi1:animations is mounted. [2025-09-24 16:02:12.153] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:02:12.153] ubi2:dml_code is mounted. [2025-09-24 16:02:12.153] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:02:12.153] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:02:12.153] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:02:12.153] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:02:12.153] data.LB_FadeInType0=100 [2025-09-24 16:02:12.153] data.CHLH_FadeInType0=0 [2025-09-24 16:02:12.153] data.WU_FadeInDelay=0 [2025-09-24 16:02:12.153] max_time_out=0 [2025-09-24 16:02:12.153] No splash screen [2025-09-24 16:02:12.153] stop dss Done [2025-09-24 16:02:12.220] /dev/mem opened. [2025-09-24 16:02:12.220] Memory mapped at address 0xffff962f2000. [2025-09-24 16:02:12.220] Read at address 0x00600018 (0xffff962f2018): 0x00000000 [2025-09-24 16:02:12.220] Write at address 0x00600018 (0xffff962f2018): 0x00400040, readback 0x00400040 [2025-09-24 16:02:12.268] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:02:12.284] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:02:12.413] Loaded PowerVR consumer services. [2025-09-24 16:02:12.476] Waiting data available... [2025-09-24 16:02:12.492] 512+0 records in [2025-09-24 16:02:12.492] 512+0 records out [2025-09-24 16:02:12.524] Starting syslogd/klogd: done [2025-09-24 16:02:12.556] DML Start [2025-09-24 16:02:12.732] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:02:12.955] DML res1: 0 [2025-09-24 16:02:13.387] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:02:13.403] Read Success [2025-09-24 16:02:13.403] Verifying certificate... [2025-09-24 16:02:13.643] Verified OK [2025-09-24 16:02:13.659] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:02:15.258] Verified OK [2025-09-24 16:02:15.258] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:02:15.946] Verified OK [2025-09-24 16:02:15.946] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:02:18.616] fs.protected_hardlinks = 1 [2025-09-24 16:02:18.632] fs.protected_symlinks = 1 [2025-09-24 16:02:18.632] kernel.modules_disabled = 1 [2025-09-24 16:02:18.808] [2025-09-24 16:02:18.808] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:02:20.046] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:02:27.746] SBL1:1210.0.1.0 [2025-09-24 16:02:27.778] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:02:29.361] SBL2:1210.0.1.0 [2025-09-24 16:02:29.393] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:02:29.505] j-A [2025-09-24 16:02:36.843] The R5 Autosar Classic is running [2025-09-24 16:02:36.874] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:02:36.874] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:02:37.482] INIT: version 2.96 booting [2025-09-24 16:02:37.594] INIT: Entering runlevel: 5 [2025-09-24 16:02:37.754] mtd24 attached [2025-09-24 16:02:37.770] mtd32 attached [2025-09-24 16:02:37.786] mtd28 attached [2025-09-24 16:02:37.802] ubi0:textures is mounted. [2025-09-24 16:02:37.818] ubi1:dml_code is mounted. [2025-09-24 16:02:37.834] RTNETLINK answers: File exists [2025-09-24 16:02:37.834] ubi2:animations is mounted. [2025-09-24 16:02:37.892] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:02:37.892] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:02:37.892] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:02:37.892] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:02:37.892] data.LB_FadeInType0=100 [2025-09-24 16:02:37.892] data.CHLH_FadeInType0=0 [2025-09-24 16:02:37.892] data.WU_FadeInDelay=0 [2025-09-24 16:02:37.892] max_time_out=0 [2025-09-24 16:02:37.892] No splash screen [2025-09-24 16:02:37.892] stop dss Done [2025-09-24 16:02:37.892] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:02:37.940] /dev/mem opened. [2025-09-24 16:02:37.940] Memory mapped at address 0xffffbca2a000. [2025-09-24 16:02:37.966] Read at address 0x00600018 (0xffffbca2a018): 0x00000000 [2025-09-24 16:02:37.966] Write at address 0x00600018 (0xffffbca2a018): 0x00400040, readback 0x00400040 [2025-09-24 16:02:37.982] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:02:38.014] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:02:38.173] Loaded PowerVR consumer services. [2025-09-24 16:02:38.226] 512+0 records in [2025-09-24 16:02:38.226] 512+0 records out [2025-09-24 16:02:38.226] Waiting data available... [2025-09-24 16:02:38.258] Starting syslogd/klogd: done [2025-09-24 16:02:38.274] DML Start [2025-09-24 16:02:38.450] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:02:38.674] DML res1: 0 [2025-09-24 16:02:39.128] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:02:39.128] Read Success [2025-09-24 16:02:39.128] Verifying certificate... [2025-09-24 16:02:39.369] Verified OK [2025-09-24 16:02:39.385] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:02:41.010] Verified OK [2025-09-24 16:02:41.010] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:02:41.672] Verified OK [2025-09-24 16:02:41.672] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:02:44.358] fs.protected_hardlinks = 1 [2025-09-24 16:02:44.358] fs.protected_symlinks = 1 [2025-09-24 16:02:44.374] kernel.modules_disabled = 1 [2025-09-24 16:02:44.565] [2025-09-24 16:02:44.565] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:02:45.782] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:02:53.464] SBL1:1210.0.1.0 [2025-09-24 16:02:53.512] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:02:55.078] SBL2:1210.0.1.0 [2025-09-24 16:02:55.110] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:02:55.222] j-A [2025-09-24 16:03:02.595] The R5 Autosar Classic is running [2025-09-24 16:03:02.595] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:03:02.595] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:03:03.203] INIT: version 2.96 booting [2025-09-24 16:03:03.314] INIT: Entering runlevel: 5 [2025-09-24 16:03:03.474] mtd32 attached [2025-09-24 16:03:03.474] mtd28 attached [2025-09-24 16:03:03.490] mtd24 attached [2025-09-24 16:03:03.538] ubi1:animations is mounted. [2025-09-24 16:03:03.538] RTNETLINK answers: File exists [2025-09-24 16:03:03.598] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:03:03.598] ubi2:textures is mounted. [2025-09-24 16:03:03.598] ubi0:dml_code is mounted. [2025-09-24 16:03:03.598] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:03:03.598] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:03:03.598] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:03:03.598] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:03:03.598] data.LB_FadeInType0=100 [2025-09-24 16:03:03.598] data.CHLH_FadeInType0=0 [2025-09-24 16:03:03.598] data.WU_FadeInDelay=0 [2025-09-24 16:03:03.598] max_time_out=0 [2025-09-24 16:03:03.598] No splash screen [2025-09-24 16:03:03.598] stop dss Done [2025-09-24 16:03:03.667] /dev/mem opened. [2025-09-24 16:03:03.667] Memory mapped at address 0xffffaca31000. [2025-09-24 16:03:03.667] Read at address 0x00600018 (0xffffaca31018): 0x00000000 [2025-09-24 16:03:03.667] Write at address 0x00600018 (0xffffaca31018): 0x00400040, readback 0x00400040 [2025-09-24 16:03:03.667] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:03:03.683] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:03:03.795] Loaded PowerVR consumer services. [2025-09-24 16:03:03.907] 512+0 records in [2025-09-24 16:03:03.923] 512+0 records out [2025-09-24 16:03:03.923] Waiting data available... [2025-09-24 16:03:03.971] Starting syslogd/klogd: done [2025-09-24 16:03:03.987] DML Start [2025-09-24 16:03:04.147] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:03:04.402] DML res1: 0 [2025-09-24 16:03:04.818] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:03:04.834] Read Success [2025-09-24 16:03:04.834] Verifying certificate... [2025-09-24 16:03:05.058] Verified OK [2025-09-24 16:03:05.058] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:03:06.760] Verified OK [2025-09-24 16:03:06.760] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:03:07.384] Verified OK [2025-09-24 16:03:07.400] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:03:10.035] fs.protected_hardlinks = 1 [2025-09-24 16:03:10.035] fs.protected_symlinks = 1 [2025-09-24 16:03:10.035] kernel.modules_disabled = 1 [2025-09-24 16:03:10.226] [2025-09-24 16:03:10.226] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:03:11.486] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:03:19.173] SBL1:1210.0.1.0 [2025-09-24 16:03:19.205] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:03:20.789] SBL2:1210.0.1.0 [2025-09-24 16:03:20.820] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:03:20.932] j-A [2025-09-24 16:03:28.271] The R5 Autosar Classic is running [2025-09-24 16:03:28.302] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:03:28.302] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:03:28.910] INIT: version 2.96 booting [2025-09-24 16:03:29.021] INIT: Entering runlevel: 5 [2025-09-24 16:03:29.181] mtd24 attached [2025-09-24 16:03:29.181] mtd28 attached [2025-09-24 16:03:29.197] mtd32 attached [2025-09-24 16:03:29.245] RTNETLINK answers: File exists [2025-09-24 16:03:29.310] ubi0:textures is mounted. [2025-09-24 16:03:29.310] ubi1:animations is mounted. [2025-09-24 16:03:29.310] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:03:29.310] ubi2:dml_code is mounted. [2025-09-24 16:03:29.310] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:03:29.310] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:03:29.310] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:03:29.310] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:03:29.310] data.LB_FadeInType0=100 [2025-09-24 16:03:29.310] data.CHLH_FadeInType0=0 [2025-09-24 16:03:29.310] data.WU_FadeInDelay=0 [2025-09-24 16:03:29.310] max_time_out=0 [2025-09-24 16:03:29.310] No splash screen [2025-09-24 16:03:29.310] stop dss Done [2025-09-24 16:03:29.341] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:03:29.380] /dev/mem opened. [2025-09-24 16:03:29.380] Memory mapped at address 0xffffbc9dd000. [2025-09-24 16:03:29.380] Read at address 0x00600018 (0xffffbc9dd018): 0x00000000 [2025-09-24 16:03:29.380] Write at address 0x00600018 (0xffffbc9dd018): 0x00400040, readback 0x00400040 [2025-09-24 16:03:29.380] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:03:29.492] Loaded PowerVR consumer services. [2025-09-24 16:03:29.619] Waiting data available... [2025-09-24 16:03:29.619] 512+0 records in [2025-09-24 16:03:29.635] 512+0 records out [2025-09-24 16:03:29.668] Starting syslogd/klogd: done [2025-09-24 16:03:29.684] DML Start [2025-09-24 16:03:29.860] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:03:30.084] DML res1: 0 [2025-09-24 16:03:30.531] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:03:30.547] Read Success [2025-09-24 16:03:30.547] Verifying certificate... [2025-09-24 16:03:30.787] Verified OK [2025-09-24 16:03:30.803] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:03:32.430] Verified OK [2025-09-24 16:03:32.430] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:03:33.067] Verified OK [2025-09-24 16:03:33.067] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:03:35.705] fs.protected_hardlinks = 1 [2025-09-24 16:03:35.721] fs.protected_symlinks = 1 [2025-09-24 16:03:35.721] kernel.modules_disabled = 1 [2025-09-24 16:03:35.912] [2025-09-24 16:03:35.912] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:03:37.189] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:03:44.868] SBL1:1210.0.1.0 [2025-09-24 16:03:44.916] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:03:46.482] SBL2:1210.0.1.0 [2025-09-24 16:03:46.514] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:03:46.626] j-A [2025-09-24 16:03:54.000] The R5 Autosar Classic is running [2025-09-24 16:03:54.000] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:03:54.000] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:03:54.608] INIT: version 2.96 booting [2025-09-24 16:03:54.720] INIT: Entering runlevel: 5 [2025-09-24 16:03:54.879] mtd24 attached [2025-09-24 16:03:54.879] mtd28 attached [2025-09-24 16:03:54.911] mtd32 attached [2025-09-24 16:03:54.927] ubi0:textures is mounted. [2025-09-24 16:03:54.943] ubi1:animations is mounted. [2025-09-24 16:03:54.943] RTNETLINK answers: File exists [2025-09-24 16:03:54.981] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:03:54.981] ubi2:dml_code is mounted. [2025-09-24 16:03:54.981] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:03:54.981] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:03:54.981] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:03:54.981] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:03:55.007] data.LB_FadeInType0=100 [2025-09-24 16:03:55.007] data.CHLH_FadeInType0=0 [2025-09-24 16:03:55.007] data.WU_FadeInDelay=0 [2025-09-24 16:03:55.007] max_time_out=0 [2025-09-24 16:03:55.007] No splash screen [2025-09-24 16:03:55.007] stop dss Done [2025-09-24 16:03:55.054] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:03:55.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:03:55.094] /dev/mem opened. [2025-09-24 16:03:55.094] Memory mapped at address 0xffff9f188000. [2025-09-24 16:03:55.094] Read at address 0x00600018 (0xffff9f188018): 0x00000000 [2025-09-24 16:03:55.094] Write at address 0x00600018 (0xffff9f188018): 0x00400040, readback 0x00400040 [2025-09-24 16:03:55.270] Loaded PowerVR consumer services. [2025-09-24 16:03:55.318] Waiting data available... [2025-09-24 16:03:55.334] 512+0 records in [2025-09-24 16:03:55.334] 512+0 records out [2025-09-24 16:03:55.366] Starting syslogd/klogd: done [2025-09-24 16:03:55.397] DML Start [2025-09-24 16:03:55.558] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:03:55.781] DML res1: 0 [2025-09-24 16:03:56.276] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:03:56.276] Read Success [2025-09-24 16:03:56.276] Verifying certificate... [2025-09-24 16:03:56.547] Verified OK [2025-09-24 16:03:56.579] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:03:58.201] Verified OK [2025-09-24 16:03:58.201] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:03:58.817] Verified OK [2025-09-24 16:03:58.817] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:04:01.519] fs.protected_hardlinks = 1 [2025-09-24 16:04:01.519] fs.protected_symlinks = 1 [2025-09-24 16:04:01.535] kernel.modules_disabled = 1 [2025-09-24 16:04:01.726] [2025-09-24 16:04:01.726] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:04:02.887] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:04:10.596] SBL1:1210.0.1.0 [2025-09-24 16:04:10.644] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:04:12.211] SBL2:1210.0.1.0 [2025-09-24 16:04:12.242] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:04:12.354] j-A [2025-09-24 16:04:19.729] The R5 Autosar Classic is running [2025-09-24 16:04:19.729] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:04:19.729] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:04:20.337] INIT: version 2.96 booting [2025-09-24 16:04:20.448] INIT: Entering runlevel: 5 [2025-09-24 16:04:20.609] mtd24 attached [2025-09-24 16:04:20.625] mtd32 attached [2025-09-24 16:04:20.657] mtd28 attached [2025-09-24 16:04:20.657] ubi0:textures is mounted. [2025-09-24 16:04:20.673] ubi1:dml_code is mounted. [2025-09-24 16:04:20.689] RTNETLINK answers: File exists [2025-09-24 16:04:20.689] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:04:20.745] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:04:20.745] ubi2:animations is mounted. [2025-09-24 16:04:20.745] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:04:20.745] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:04:20.745] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:04:20.745] data.LB_FadeInType0=100 [2025-09-24 16:04:20.745] data.CHLH_FadeInType0=0 [2025-09-24 16:04:20.745] data.WU_FadeInDelay=0 [2025-09-24 16:04:20.745] max_time_out=0 [2025-09-24 16:04:20.745] No splash screen [2025-09-24 16:04:20.745] stop dss Done [2025-09-24 16:04:20.820] /dev/mem opened. [2025-09-24 16:04:20.820] Memory mapped at address 0xffffb0b5d000. [2025-09-24 16:04:20.820] Read at address 0x00600018 (0xffffb0b5d018): 0x00000000 [2025-09-24 16:04:20.820] Write at address 0x00600018 (0xffffb0b5d018): 0x00400040, readback 0x00400040 [2025-09-24 16:04:20.820] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:04:20.820] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:04:21.012] Loaded PowerVR consumer services. [2025-09-24 16:04:21.044] 512+0 records in [2025-09-24 16:04:21.044] 512+0 records out [2025-09-24 16:04:21.060] Waiting data available... [2025-09-24 16:04:21.091] Starting syslogd/klogd: done [2025-09-24 16:04:21.107] DML Start [2025-09-24 16:04:21.284] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:04:21.524] DML res1: 0 [2025-09-24 16:04:22.003] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:04:22.019] Read Success [2025-09-24 16:04:22.019] Verifying certificate... [2025-09-24 16:04:22.259] Verified OK [2025-09-24 16:04:22.275] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:04:23.886] Verified OK [2025-09-24 16:04:23.886] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:04:24.540] Verified OK [2025-09-24 16:04:24.540] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:04:27.253] fs.protected_hardlinks = 1 [2025-09-24 16:04:27.253] fs.protected_symlinks = 1 [2025-09-24 16:04:27.253] kernel.modules_disabled = 1 [2025-09-24 16:04:27.428] [2025-09-24 16:04:27.428] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:04:28.610] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:04:36.295] SBL1:1210.0.1.0 [2025-09-24 16:04:36.343] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:04:37.909] SBL2:1210.0.1.0 [2025-09-24 16:04:37.942] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:04:38.054] j-A [2025-09-24 16:04:45.409] The R5 Autosar Classic is running [2025-09-24 16:04:45.409] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:04:45.430] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:04:46.038] INIT: version 2.96 booting [2025-09-24 16:04:46.149] INIT: Entering runlevel: 5 [2025-09-24 16:04:46.309] mtd28 attached [2025-09-24 16:04:46.309] mtd24 attached [2025-09-24 16:04:46.325] mtd32 attached [2025-09-24 16:04:46.373] ubi1:textures is mounted. [2025-09-24 16:04:46.373] RTNETLINK answers: File exists [2025-09-24 16:04:46.410] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:04:46.410] ubi2:dml_code is mounted. [2025-09-24 16:04:46.410] ubi0:animations is mounted. [2025-09-24 16:04:46.410] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:04:46.410] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:04:46.410] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:04:46.410] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:04:46.435] data.LB_FadeInType0=100 [2025-09-24 16:04:46.435] data.CHLH_FadeInType0=0 [2025-09-24 16:04:46.435] data.WU_FadeInDelay=0 [2025-09-24 16:04:46.435] max_time_out=0 [2025-09-24 16:04:46.435] No splash screen [2025-09-24 16:04:46.435] stop dss Done [2025-09-24 16:04:46.478] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:04:46.478] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:04:46.510] /dev/mem opened. [2025-09-24 16:04:46.510] Memory mapped at address 0xffffbb7a8000. [2025-09-24 16:04:46.510] Read at address 0x00600018 (0xffffbb7a8018): 0x00000000 [2025-09-24 16:04:46.510] Write at address 0x00600018 (0xffffbb7a8018): 0x00400040, readback 0x00400040 [2025-09-24 16:04:46.574] Loaded PowerVR consumer services. [2025-09-24 16:04:46.734] Waiting data available... [2025-09-24 16:04:46.750] 512+0 records in [2025-09-24 16:04:46.750] 512+0 records out [2025-09-24 16:04:46.765] Starting syslogd/klogd: done [2025-09-24 16:04:46.798] DML Start [2025-09-24 16:04:47.006] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:04:47.229] DML res1: 0 [2025-09-24 16:04:47.643] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:04:47.643] Read Success [2025-09-24 16:04:47.643] Verifying certificate... [2025-09-24 16:04:47.899] Verified OK [2025-09-24 16:04:47.899] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:04:49.592] Verified OK [2025-09-24 16:04:49.592] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:04:50.151] Verified OK [2025-09-24 16:04:50.151] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:04:52.725] fs.protected_hardlinks = 1 [2025-09-24 16:04:52.742] fs.protected_symlinks = 1 [2025-09-24 16:04:52.742] kernel.modules_disabled = 1 [2025-09-24 16:04:52.949] [2025-09-24 16:04:52.949] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:04:54.284] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:05:02.000] SBL1:1210.0.1.0 [2025-09-24 16:05:02.048] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:05:03.615] SBL2:1210.0.1.0 [2025-09-24 16:05:03.663] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:05:03.759] j-A [2025-09-24 16:05:11.113] The R5 Autosar Classic is running [2025-09-24 16:05:11.137] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:05:11.137] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:05:11.744] INIT: version 2.96 booting [2025-09-24 16:05:11.856] INIT: Entering runlevel: 5 [2025-09-24 16:05:12.016] mtd24 attached [2025-09-24 16:05:12.016] mtd28 attached [2025-09-24 16:05:12.048] mtd32 attached [2025-09-24 16:05:12.080] ubi0:textures is mounted. [2025-09-24 16:05:12.080] RTNETLINK answers: File exists [2025-09-24 16:05:12.126] ubi1:animations is mounted. [2025-09-24 16:05:12.126] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:05:12.126] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:05:12.126] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:05:12.126] ubi2:dml_code is mounted. [2025-09-24 16:05:12.126] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:05:12.126] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:05:12.150] data.LB_FadeInType0=100 [2025-09-24 16:05:12.150] data.CHLH_FadeInType0=0 [2025-09-24 16:05:12.150] data.WU_FadeInDelay=0 [2025-09-24 16:05:12.150] max_time_out=0 [2025-09-24 16:05:12.150] No splash screen [2025-09-24 16:05:12.150] stop dss Done [2025-09-24 16:05:12.166] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:05:12.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:05:12.216] /dev/mem opened. [2025-09-24 16:05:12.216] Memory mapped at address 0xffff8e3f6000. [2025-09-24 16:05:12.216] Read at address 0x00600018 (0xffff8e3f6018): 0x00000000 [2025-09-24 16:05:12.216] Write at address 0x00600018 (0xffff8e3f6018): 0x00400040, readback 0x00400040 [2025-09-24 16:05:12.424] Loaded PowerVR consumer services. [2025-09-24 16:05:12.481] 512+0 records in [2025-09-24 16:05:12.481] 512+0 records out [2025-09-24 16:05:12.481] Waiting data available... [2025-09-24 16:05:12.513] Starting syslogd/klogd: done [2025-09-24 16:05:12.529] DML Start [2025-09-24 16:05:12.704] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:05:12.945] DML res1: 0 [2025-09-24 16:05:13.360] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:05:13.376] Read Success [2025-09-24 16:05:13.376] Verifying certificate... [2025-09-24 16:05:13.600] Verified OK [2025-09-24 16:05:13.616] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:05:15.160] Verified OK [2025-09-24 16:05:15.160] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:05:15.800] Verified OK [2025-09-24 16:05:15.800] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:05:18.597] fs.protected_hardlinks = 1 [2025-09-24 16:05:18.597] fs.protected_symlinks = 1 [2025-09-24 16:05:18.613] kernel.modules_disabled = 1 [2025-09-24 16:05:18.805] [2025-09-24 16:05:18.805] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:05:20.030] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:05:27.720] SBL1:1210.0.1.0 [2025-09-24 16:05:27.752] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:05:29.335] SBL2:1210.0.1.0 [2025-09-24 16:05:29.367] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:05:29.479] j-A [2025-09-24 16:05:36.818] The R5 Autosar Classic is running [2025-09-24 16:05:36.849] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:05:36.849] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:05:37.457] INIT: version 2.96 booting [2025-09-24 16:05:37.569] INIT: Entering runlevel: 5 [2025-09-24 16:05:37.712] mtd28 attached [2025-09-24 16:05:37.728] mtd24 attached [2025-09-24 16:05:37.744] mtd32 attached [2025-09-24 16:05:37.826] ubi0:animations is mounted. [2025-09-24 16:05:37.826] RTNETLINK answers: File exists [2025-09-24 16:05:37.826] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:05:37.826] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:05:37.826] ubi1:textures is mounted. [2025-09-24 16:05:37.826] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:05:37.826] ubi2:dml_code is mounted. [2025-09-24 16:05:37.826] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:05:37.826] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:05:37.849] data.LB_FadeInType0=100 [2025-09-24 16:05:37.849] data.CHLH_FadeInType0=0 [2025-09-24 16:05:37.849] data.WU_FadeInDelay=0 [2025-09-24 16:05:37.849] max_time_out=0 [2025-09-24 16:05:37.849] No splash screen [2025-09-24 16:05:37.849] stop dss Done [2025-09-24 16:05:37.881] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:05:37.935] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:05:37.935] /dev/mem opened. [2025-09-24 16:05:37.935] Memory mapped at address 0xffffa1713000. [2025-09-24 16:05:37.935] Read at address 0x00600018 (0xffffa1713018): 0x00000000 [2025-09-24 16:05:37.935] Write at address 0x00600018 (0xffffa1713018): 0x00400040, readback 0x00400040 [2025-09-24 16:05:38.063] Loaded PowerVR consumer services. [2025-09-24 16:05:38.159] 512+0 records in [2025-09-24 16:05:38.159] 512+0 records out [2025-09-24 16:05:38.175] Waiting data available... [2025-09-24 16:05:38.191] Starting syslogd/klogd: done [2025-09-24 16:05:38.207] DML Start [2025-09-24 16:05:38.399] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:05:38.623] DML res1: 0 [2025-09-24 16:05:39.059] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:05:39.059] Read Success [2025-09-24 16:05:39.059] Verifying certificate... [2025-09-24 16:05:39.284] Verified OK [2025-09-24 16:05:39.300] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:05:40.923] Verified OK [2025-09-24 16:05:40.923] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:05:41.524] Verified OK [2025-09-24 16:05:41.524] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:05:44.163] fs.protected_hardlinks = 1 [2025-09-24 16:05:44.191] fs.protected_symlinks = 1 [2025-09-24 16:05:44.191] kernel.modules_disabled = 1 [2025-09-24 16:05:44.383] [2025-09-24 16:05:44.383] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:05:45.707] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:05:53.426] SBL1:1210.0.1.0 [2025-09-24 16:05:53.458] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:05:55.041] SBL2:1210.0.1.0 [2025-09-24 16:05:55.073] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:05:55.185] j-A [2025-09-24 16:06:02.557] The R5 Autosar Classic is running [2025-09-24 16:06:02.557] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:06:02.557] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:06:03.166] INIT: version 2.96 booting [2025-09-24 16:06:03.277] INIT: Entering runlevel: 5 [2025-09-24 16:06:03.421] mtd28 attached [2025-09-24 16:06:03.437] mtd24 attached [2025-09-24 16:06:03.453] mtd32 attached [2025-09-24 16:06:03.501] ubi1:textures is mounted. [2025-09-24 16:06:03.501] RTNETLINK answers: File exists [2025-09-24 16:06:03.557] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:06:03.557] ubi0:animations is mounted. [2025-09-24 16:06:03.557] ubi2:dml_code is mounted. [2025-09-24 16:06:03.557] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:06:03.557] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:06:03.557] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:06:03.557] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:06:03.557] data.LB_FadeInType0=100 [2025-09-24 16:06:03.557] data.CHLH_FadeInType0=0 [2025-09-24 16:06:03.557] data.WU_FadeInDelay=0 [2025-09-24 16:06:03.557] max_time_out=0 [2025-09-24 16:06:03.557] No splash screen [2025-09-24 16:06:03.557] stop dss Done [2025-09-24 16:06:03.588] /dev/mem opened. [2025-09-24 16:06:03.588] Memory mapped at address 0xffff9c1d9000. [2025-09-24 16:06:03.614] Read at address 0x00600018 (0xffff9c1d9018): 0x00000000 [2025-09-24 16:06:03.614] Write at address 0x00600018 (0xffff9c1d9018): 0x00400040, readback 0x00400040 [2025-09-24 16:06:03.630] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:06:03.646] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:06:03.837] Loaded PowerVR consumer services. [2025-09-24 16:06:03.882] Waiting data available... [2025-09-24 16:06:03.882] 512+0 records in [2025-09-24 16:06:03.882] 512+0 records out [2025-09-24 16:06:03.914] Starting syslogd/klogd: done [2025-09-24 16:06:03.946] DML Start [2025-09-24 16:06:04.074] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:06:04.299] DML res1: 0 [2025-09-24 16:06:04.872] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:06:04.872] Read Success [2025-09-24 16:06:04.872] Verifying certificate... [2025-09-24 16:06:05.160] Verified OK [2025-09-24 16:06:05.192] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:06:06.868] Verified OK [2025-09-24 16:06:06.868] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:06:07.417] Verified OK [2025-09-24 16:06:07.417] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:06:09.847] fs.protected_hardlinks = 1 [2025-09-24 16:06:09.863] fs.protected_symlinks = 1 [2025-09-24 16:06:09.863] kernel.modules_disabled = 1 [2025-09-24 16:06:10.070] [2025-09-24 16:06:10.070] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:06:11.432] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:06:19.165] SBL1:1210.0.1.0 [2025-09-24 16:06:19.196] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:06:20.779] SBL2:1210.0.1.0 [2025-09-24 16:06:20.811] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:06:20.923] j-A [2025-09-24 16:06:28.296] The R5 Autosar Classic is running [2025-09-24 16:06:28.296] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:06:28.296] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:06:28.903] INIT: version 2.96 booting [2025-09-24 16:06:29.015] INIT: Entering runlevel: 5 [2025-09-24 16:06:29.175] mtd32 attached [2025-09-24 16:06:29.175] mtd28 attached [2025-09-24 16:06:29.191] mtd24 attached [2025-09-24 16:06:29.223] ubi0:dml_code is mounted. [2025-09-24 16:06:29.239] RTNETLINK answers: File exists [2025-09-24 16:06:29.274] ubi2:textures is mounted. [2025-09-24 16:06:29.274] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:06:29.274] ubi1:animations is mounted. [2025-09-24 16:06:29.274] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:06:29.274] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:06:29.308] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:06:29.308] data.LB_FadeInType0=100 [2025-09-24 16:06:29.308] data.CHLH_FadeInType0=0 [2025-09-24 16:06:29.308] data.WU_FadeInDelay=0 [2025-09-24 16:06:29.308] max_time_out=0 [2025-09-24 16:06:29.308] No splash screen [2025-09-24 16:06:29.308] stop dss Done [2025-09-24 16:06:29.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:06:29.374] /dev/mem opened. [2025-09-24 16:06:29.374] Memory mapped at address 0xffff927c2000. [2025-09-24 16:06:29.374] Read at address 0x00600018 (0xffff927c2018): 0x00000000 [2025-09-24 16:06:29.374] Write at address 0x00600018 (0xffff927c2018): 0x00400040, readback 0x00400040 [2025-09-24 16:06:29.374] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:06:29.390] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:06:29.583] Loaded PowerVR consumer services. [2025-09-24 16:06:29.615] 512+0 records in [2025-09-24 16:06:29.615] 512+0 records out [2025-09-24 16:06:29.647] Starting syslogd/klogd: Waiting data available... [2025-09-24 16:06:29.662] done [2025-09-24 16:06:29.662] DML Start [2025-09-24 16:06:29.822] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:06:30.030] DML res1: 0 [2025-09-24 16:06:30.478] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:06:30.494] Read Success [2025-09-24 16:06:30.494] Verifying certificate... [2025-09-24 16:06:30.718] Verified OK [2025-09-24 16:06:30.750] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:06:32.523] Verified OK [2025-09-24 16:06:32.523] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:06:33.138] Verified OK [2025-09-24 16:06:33.138] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:06:35.743] fs.protected_hardlinks = 1 [2025-09-24 16:06:35.743] fs.protected_symlinks = 1 [2025-09-24 16:06:35.759] kernel.modules_disabled = 1 [2025-09-24 16:06:35.952] [2025-09-24 16:06:35.952] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:06:37.151] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:06:44.870] SBL1:1210.0.1.0 [2025-09-24 16:06:44.901] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:06:46.485] SBL2:1210.0.1.0 [2025-09-24 16:06:46.517] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:06:46.628] j-A [2025-09-24 16:06:53.998] The R5 Autosar Classic is running [2025-09-24 16:06:53.998] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:06:53.998] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:06:54.606] INIT: version 2.96 booting [2025-09-24 16:06:54.718] INIT: Entering runlevel: 5 [2025-09-24 16:06:54.861] mtd28 attached [2025-09-24 16:06:54.877] mtd24 attached [2025-09-24 16:06:54.893] mtd32 attached [2025-09-24 16:06:54.909] ubi0:animations is mounted. [2025-09-24 16:06:54.941] RTNETLINK answers: File exists [2025-09-24 16:06:54.974] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:06:54.974] ubi1:textures is mounted. [2025-09-24 16:06:54.974] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:06:54.974] ubi2:dml_code is mounted. [2025-09-24 16:06:54.974] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:06:54.974] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:06:54.974] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:06:55.002] data.LB_FadeInType0=100 [2025-09-24 16:06:55.002] data.CHLH_FadeInType0=0 [2025-09-24 16:06:55.002] data.WU_FadeInDelay=0 [2025-09-24 16:06:55.002] max_time_out=0 [2025-09-24 16:06:55.002] No splash screen [2025-09-24 16:06:55.002] stop dss Done [2025-09-24 16:06:55.034] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:06:55.071] /dev/mem opened. [2025-09-24 16:06:55.071] Memory mapped at address 0xffff93575000. [2025-09-24 16:06:55.071] Read at address 0x00600018 (0xffff93575018): 0x00000000 [2025-09-24 16:06:55.071] Write at address 0x00600018 (0xffff93575018): 0x00400040, readback 0x00400040 [2025-09-24 16:06:55.071] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:06:55.183] Loaded PowerVR consumer services. [2025-09-24 16:06:55.311] 512+0 records in [2025-09-24 16:06:55.332] 512+0 records out [2025-09-24 16:06:55.332] Waiting data available... [2025-09-24 16:06:55.348] Starting syslogd/klogd: done [2025-09-24 16:06:55.364] DML Start [2025-09-24 16:06:55.540] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:06:55.796] DML res1: 0 [2025-09-24 16:06:56.179] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:06:56.201] Read Success [2025-09-24 16:06:56.201] Verifying certificate... [2025-09-24 16:06:56.473] Verified OK [2025-09-24 16:06:56.489] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:06:58.236] Verified OK [2025-09-24 16:06:58.237] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:06:58.872] Verified OK [2025-09-24 16:06:58.872] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:07:01.459] fs.protected_hardlinks = 1 [2025-09-24 16:07:01.459] fs.protected_symlinks = 1 [2025-09-24 16:07:01.459] kernel.modules_disabled = 1 [2025-09-24 16:07:01.634] [2025-09-24 16:07:01.634] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:07:02.863] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:07:10.576] SBL1:1210.0.1.0 [2025-09-24 16:07:10.624] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:07:12.191] SBL2:1210.0.1.0 [2025-09-24 16:07:12.222] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:07:12.334] j-A [2025-09-24 16:07:19.688] The R5 Autosar Classic is running [2025-09-24 16:07:19.710] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:07:19.710] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:07:20.318] INIT: version 2.96 booting [2025-09-24 16:07:20.429] INIT: Entering runlevel: 5 [2025-09-24 16:07:20.589] mtd32 attached [2025-09-24 16:07:20.589] mtd24 attached [2025-09-24 16:07:20.621] mtd28 attached [2025-09-24 16:07:20.637] ubi0:dml_code is mounted. [2025-09-24 16:07:20.653] RTNETLINK answers: File exists [2025-09-24 16:07:20.653] ubi1:textures is mounted. [2025-09-24 16:07:20.714] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:07:20.714] ubi2:animations is mounted. [2025-09-24 16:07:20.714] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:07:20.714] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:07:20.714] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:07:20.714] data.LB_FadeInType0=100 [2025-09-24 16:07:20.714] data.CHLH_FadeInType0=0 [2025-09-24 16:07:20.714] data.WU_FadeInDelay=0 [2025-09-24 16:07:20.714] max_time_out=0 [2025-09-24 16:07:20.714] No splash screen [2025-09-24 16:07:20.714] stop dss Done [2025-09-24 16:07:20.714] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:07:20.747] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:07:20.782] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:07:20.783] /dev/mem opened. [2025-09-24 16:07:20.783] Memory mapped at address 0xffff902fc000. [2025-09-24 16:07:20.783] Read at address 0x00600018 (0xffff902fc018): 0x00000000 [2025-09-24 16:07:20.783] Write at address 0x00600018 (0xffff902fc018): 0x00400040, readback 0x00400040 [2025-09-24 16:07:20.910] Loaded PowerVR consumer services. [2025-09-24 16:07:21.022] Waiting data available... [2025-09-24 16:07:21.037] 512+0 records in [2025-09-24 16:07:21.037] 512+0 records out [2025-09-24 16:07:21.053] Starting syslogd/klogd: done [2025-09-24 16:07:21.069] DML Start [2025-09-24 16:07:21.262] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:07:21.469] DML res1: 0 [2025-09-24 16:07:21.949] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:07:21.965] Read Success [2025-09-24 16:07:21.965] Verifying certificate... [2025-09-24 16:07:22.204] Verified OK [2025-09-24 16:07:22.220] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:07:23.843] Verified OK [2025-09-24 16:07:23.843] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:07:24.495] Verified OK [2025-09-24 16:07:24.495] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:07:27.133] fs.protected_hardlinks = 1 [2025-09-24 16:07:27.133] fs.protected_symlinks = 1 [2025-09-24 16:07:27.149] kernel.modules_disabled = 1 [2025-09-24 16:07:27.342] [2025-09-24 16:07:27.342] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:07:28.570] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:07:36.316] SBL1:1210.0.1.0 [2025-09-24 16:07:36.348] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:07:37.931] SBL2:1210.0.1.0 [2025-09-24 16:07:37.963] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:07:38.058] j-A [2025-09-24 16:07:45.412] The R5 Autosar Classic is running [2025-09-24 16:07:45.437] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:07:45.437] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:07:46.044] INIT: version 2.96 booting [2025-09-24 16:07:46.172] INIT: Entering runlevel: 5 [2025-09-24 16:07:46.317] mtd24 attached [2025-09-24 16:07:46.332] mtd32 attached [2025-09-24 16:07:46.348] mtd28 attached [2025-09-24 16:07:46.364] ubi0:textures is mounted. [2025-09-24 16:07:46.445] ubi1:dml_code is mounted. [2025-09-24 16:07:46.445] RTNETLINK answers: File exists [2025-09-24 16:07:46.445] ubi2:animations is mounted. [2025-09-24 16:07:46.445] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:07:46.445] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:07:46.445] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:07:46.445] data.LB_FadeInType0=100 [2025-09-24 16:07:46.445] data.CHLH_FadeInType0=0 [2025-09-24 16:07:46.445] data.WU_FadeInDelay=0 [2025-09-24 16:07:46.445] max_time_out=0 [2025-09-24 16:07:46.445] No splash screen [2025-09-24 16:07:46.445] stop dss Done [2025-09-24 16:07:46.445] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:07:46.461] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:07:46.514] /dev/mem opened. [2025-09-24 16:07:46.514] Memory mapped at address 0xffff8dd19000. [2025-09-24 16:07:46.514] Read at address 0x00600018 (0xffff8dd19018): 0x00000000 [2025-09-24 16:07:46.514] Write at address 0x00600018 (0xffff8dd19018): 0x00400040, readback 0x00400040 [2025-09-24 16:07:46.530] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:07:46.546] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:07:46.738] Loaded PowerVR consumer services. [2025-09-24 16:07:46.754] 512+0 records in [2025-09-24 16:07:46.770] 512+0 records out [2025-09-24 16:07:46.802] Waiting data available... [2025-09-24 16:07:46.817] Starting syslogd/klogd: done [2025-09-24 16:07:46.833] DML Start [2025-09-24 16:07:47.009] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:07:47.249] DML res1: 0 [2025-09-24 16:07:47.776] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:07:47.776] Read Success [2025-09-24 16:07:47.776] Verifying certificate... [2025-09-24 16:07:48.000] Verified OK [2025-09-24 16:07:48.047] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:07:49.865] Verified OK [2025-09-24 16:07:49.865] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:07:50.351] Verified OK [2025-09-24 16:07:50.351] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:07:52.718] fs.protected_hardlinks = 1 [2025-09-24 16:07:52.718] fs.protected_symlinks = 1 [2025-09-24 16:07:52.733] kernel.modules_disabled = 1 [2025-09-24 16:07:52.926] [2025-09-24 16:07:52.926] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:07:54.329] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:08:02.026] SBL1:1210.0.1.0 [2025-09-24 16:08:02.073] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:08:03.640] SBL2:1210.0.1.0 [2025-09-24 16:08:03.672] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:08:03.785] j-A [2025-09-24 16:08:11.138] The R5 Autosar Classic is running [2025-09-24 16:08:11.138] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:08:11.158] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:08:11.766] INIT: version 2.96 booting [2025-09-24 16:08:11.878] INIT: Entering runlevel: 5 [2025-09-24 16:08:12.022] mtd28 attached [2025-09-24 16:08:12.038] mtd24 attached [2025-09-24 16:08:12.054] mtd32 attached [2025-09-24 16:08:12.086] ubi1:textures is mounted. [2025-09-24 16:08:12.135] RTNETLINK answers: File exists [2025-09-24 16:08:12.135] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:08:12.135] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:08:12.135] ubi0:animations is mounted. [2025-09-24 16:08:12.135] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:08:12.135] ubi2:dml_code is mounted. [2025-09-24 16:08:12.135] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:08:12.135] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:08:12.157] data.LB_FadeInType0=100 [2025-09-24 16:08:12.157] data.CHLH_FadeInType0=0 [2025-09-24 16:08:12.157] data.WU_FadeInDelay=0 [2025-09-24 16:08:12.157] max_time_out=0 [2025-09-24 16:08:12.157] No splash screen [2025-09-24 16:08:12.157] stop dss Done [2025-09-24 16:08:12.173] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:08:12.189] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:08:12.238] /dev/mem opened. [2025-09-24 16:08:12.238] Memory mapped at address 0xffffa1766000. [2025-09-24 16:08:12.238] Read at address 0x00600018 (0xffffa1766018): 0x00000000 [2025-09-24 16:08:12.238] Write at address 0x00600018 (0xffffa1766018): 0x00400040, readback 0x00400040 [2025-09-24 16:08:12.366] Loaded PowerVR consumer services. [2025-09-24 16:08:12.478] 512+0 records in [2025-09-24 16:08:12.478] 512+0 records out [2025-09-24 16:08:12.494] Waiting data available... [2025-09-24 16:08:12.494] Starting syslogd/klogd: done [2025-09-24 16:08:12.526] DML Start [2025-09-24 16:08:12.686] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:08:12.941] DML res1: 0 [2025-09-24 16:08:13.373] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:08:13.373] Read Success [2025-09-24 16:08:13.389] Verifying certificate... [2025-09-24 16:08:13.676] Verified OK [2025-09-24 16:08:13.692] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:08:15.292] Verified OK [2025-09-24 16:08:15.312] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:08:15.872] Verified OK [2025-09-24 16:08:15.872] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:08:18.574] fs.protected_hardlinks = 1 [2025-09-24 16:08:18.574] fs.protected_symlinks = 1 [2025-09-24 16:08:18.590] kernel.modules_disabled = 1 [2025-09-24 16:08:18.797] [2025-09-24 16:08:18.797] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:08:20.034] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:08:27.740] SBL1:1210.0.1.0 [2025-09-24 16:08:27.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:08:29.355] SBL2:1210.0.1.0 [2025-09-24 16:08:29.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:08:29.498] j-A [2025-09-24 16:08:36.853] The R5 Autosar Classic is running [2025-09-24 16:08:36.876] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:08:36.876] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:08:37.483] INIT: version 2.96 booting [2025-09-24 16:08:37.595] INIT: Entering runlevel: 5 [2025-09-24 16:08:37.755] mtd28 attached [2025-09-24 16:08:37.755] mtd24 attached [2025-09-24 16:08:37.771] mtd32 attached [2025-09-24 16:08:37.803] ubi0:animations is mounted. [2025-09-24 16:08:37.819] ubi1:textures is mounted. [2025-09-24 16:08:37.889] RTNETLINK answers: File exists [2025-09-24 16:08:37.889] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:08:37.889] ubi2:dml_code is mounted. [2025-09-24 16:08:37.889] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:08:37.889] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:08:37.889] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:08:37.889] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:08:37.889] data.LB_FadeInType0=100 [2025-09-24 16:08:37.889] data.CHLH_FadeInType0=0 [2025-09-24 16:08:37.889] data.WU_FadeInDelay=0 [2025-09-24 16:08:37.889] max_time_out=0 [2025-09-24 16:08:37.889] No splash screen [2025-09-24 16:08:37.889] stop dss Done [2025-09-24 16:08:37.921] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:08:37.955] /dev/mem opened. [2025-09-24 16:08:37.955] Memory mapped at address 0xffffab6a3000. [2025-09-24 16:08:37.955] Read at address 0x00600018 (0xffffab6a3018): 0x00000000 [2025-09-24 16:08:37.955] Write at address 0x00600018 (0xffffab6a3018): 0x00400040, readback 0x00400040 [2025-09-24 16:08:37.955] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:08:38.115] Loaded PowerVR consumer services. [2025-09-24 16:08:38.211] Waiting data available... [2025-09-24 16:08:38.227] 512+0 records in [2025-09-24 16:08:38.227] 512+0 records out [2025-09-24 16:08:38.274] Starting syslogd/klogd: done [2025-09-24 16:08:38.290] DML Start [2025-09-24 16:08:38.482] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:08:38.738] DML res1: 0 [2025-09-24 16:08:39.082] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:08:39.082] Read Success [2025-09-24 16:08:39.082] Verifying certificate... [2025-09-24 16:08:39.304] Verified OK [2025-09-24 16:08:39.320] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:08:41.120] Verified OK [2025-09-24 16:08:41.120] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:08:41.721] Verified OK [2025-09-24 16:08:41.721] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:08:44.263] fs.protected_hardlinks = 1 [2025-09-24 16:08:44.263] fs.protected_symlinks = 1 [2025-09-24 16:08:44.279] kernel.modules_disabled = 1 [2025-09-24 16:08:44.471] [2025-09-24 16:08:44.471] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:08:45.780] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:08:53.462] SBL1:1210.0.1.0 [2025-09-24 16:08:53.510] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:08:55.077] SBL2:1210.0.1.0 [2025-09-24 16:08:55.125] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:08:55.221] j-A [2025-09-24 16:09:02.575] The R5 Autosar Classic is running [2025-09-24 16:09:02.598] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:09:02.598] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:09:03.206] INIT: version 2.96 booting [2025-09-24 16:09:03.317] INIT: Entering runlevel: 5 [2025-09-24 16:09:03.477] mtd24 attached [2025-09-24 16:09:03.477] mtd32 attached [2025-09-24 16:09:03.493] mtd28 attached [2025-09-24 16:09:03.541] ubi0:textures is mounted. [2025-09-24 16:09:03.541] RTNETLINK answers: File exists [2025-09-24 16:09:03.603] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:09:03.603] ubi2:animations is mounted. [2025-09-24 16:09:03.603] ubi1:dml_code is mounted. [2025-09-24 16:09:03.603] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:09:03.603] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:09:03.603] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:09:03.603] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:09:03.603] data.LB_FadeInType0=100 [2025-09-24 16:09:03.603] data.CHLH_FadeInType0=0 [2025-09-24 16:09:03.603] data.WU_FadeInDelay=0 [2025-09-24 16:09:03.603] max_time_out=0 [2025-09-24 16:09:03.603] No splash screen [2025-09-24 16:09:03.603] stop dss Done [2025-09-24 16:09:03.651] /dev/mem opened. [2025-09-24 16:09:03.651] Memory mapped at address 0xffffa0563000. [2025-09-24 16:09:03.677] Read at address 0x00600018 (0xffffa0563018): 0x00000000 [2025-09-24 16:09:03.677] Write at address 0x00600018 (0xffffa0563018): 0x00400040, readback 0x00400040 [2025-09-24 16:09:03.693] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:09:03.709] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:09:03.868] Loaded PowerVR consumer services. [2025-09-24 16:09:03.884] 512+0 records in [2025-09-24 16:09:03.884] 512+0 records out [2025-09-24 16:09:03.932] Waiting data available... [2025-09-24 16:09:03.948] Starting syslogd/klogd: done [2025-09-24 16:09:03.965] DML Start [2025-09-24 16:09:04.125] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:09:04.365] DML res1: 0 [2025-09-24 16:09:04.850] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:09:04.850] Read Success [2025-09-24 16:09:04.850] Verifying certificate... [2025-09-24 16:09:05.089] Verified OK [2025-09-24 16:09:05.105] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:09:06.752] Verified OK [2025-09-24 16:09:06.752] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:09:07.399] Verified OK [2025-09-24 16:09:07.399] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:09:10.101] fs.protected_hardlinks = 1 [2025-09-24 16:09:10.101] fs.protected_symlinks = 1 [2025-09-24 16:09:10.116] kernel.modules_disabled = 1 [2025-09-24 16:09:10.292] [2025-09-24 16:09:10.292] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:09:11.468] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:09:19.193] SBL1:1210.0.1.0 [2025-09-24 16:09:19.225] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:09:20.807] SBL2:1210.0.1.0 [2025-09-24 16:09:20.839] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:09:20.951] j-A [2025-09-24 16:09:28.290] The R5 Autosar Classic is running [2025-09-24 16:09:28.315] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:09:28.315] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:09:28.923] INIT: version 2.96 booting [2025-09-24 16:09:29.034] INIT: Entering runlevel: 5 [2025-09-24 16:09:29.195] mtd32 attached [2025-09-24 16:09:29.211] mtd28 attached [2025-09-24 16:09:29.211] mtd24 attached [2025-09-24 16:09:29.258] RTNETLINK answers: File exists [2025-09-24 16:09:29.326] ubi1:animations is mounted. [2025-09-24 16:09:29.326] ubi0:dml_code is mounted. [2025-09-24 16:09:29.326] ubi2:textures is mounted. [2025-09-24 16:09:29.326] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:09:29.326] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:09:29.326] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:09:29.326] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:09:29.326] data.LB_FadeInType0=100 [2025-09-24 16:09:29.326] data.CHLH_FadeInType0=0 [2025-09-24 16:09:29.326] data.WU_FadeInDelay=0 [2025-09-24 16:09:29.326] max_time_out=0 [2025-09-24 16:09:29.326] No splash screen [2025-09-24 16:09:29.326] stop dss Done [2025-09-24 16:09:29.326] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:09:29.393] /dev/mem opened. [2025-09-24 16:09:29.393] Memory mapped at address 0xffffa57c5000. [2025-09-24 16:09:29.393] Read at address 0x00600018 (0xffffa57c5018): 0x00000000 [2025-09-24 16:09:29.393] Write at address 0x00600018 (0xffffa57c5018): 0x00400040, readback 0x00400040 [2025-09-24 16:09:29.425] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:09:29.441] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:09:29.633] Loaded PowerVR consumer services. [2025-09-24 16:09:29.692] Waiting data available... [2025-09-24 16:09:29.692] 512+0 records in [2025-09-24 16:09:29.692] 512+0 records out [2025-09-24 16:09:29.724] Starting syslogd/klogd: done [2025-09-24 16:09:29.740] DML Start [2025-09-24 16:09:29.900] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:09:30.124] DML res1: 0 [2025-09-24 16:09:30.636] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:09:30.636] Read Success [2025-09-24 16:09:30.652] Verifying certificate... [2025-09-24 16:09:30.875] Verified OK [2025-09-24 16:09:30.891] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:09:32.586] Verified OK [2025-09-24 16:09:32.586] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:09:33.190] Verified OK [2025-09-24 16:09:33.190] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:09:35.732] fs.protected_hardlinks = 1 [2025-09-24 16:09:35.748] fs.protected_symlinks = 1 [2025-09-24 16:09:35.748] kernel.modules_disabled = 1 [2025-09-24 16:09:35.939] [2025-09-24 16:09:35.939] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:09:37.229] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:09:44.920] SBL1:1210.0.1.0 [2025-09-24 16:09:44.968] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:09:46.534] SBL2:1210.0.1.0 [2025-09-24 16:09:46.566] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:09:46.678] j-A [2025-09-24 16:09:54.052] The R5 Autosar Classic is running [2025-09-24 16:09:54.052] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:09:54.052] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:09:54.659] INIT: version 2.96 booting [2025-09-24 16:09:54.772] INIT: Entering runlevel: 5 [2025-09-24 16:09:54.915] mtd28 attached [2025-09-24 16:09:54.931] mtd24 attached [2025-09-24 16:09:54.963] ubi0:animations is mounted. [2025-09-24 16:09:54.979] ubi1:textures is mounted. [2025-09-24 16:09:54.979] mtd32 attached [2025-09-24 16:09:54.995] RTNETLINK answers: File exists [2025-09-24 16:09:55.054] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:09:55.054] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:09:55.054] ubi2:dml_code is mounted. [2025-09-24 16:09:55.054] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:09:55.054] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:09:55.054] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:09:55.054] data.LB_FadeInType0=100 [2025-09-24 16:09:55.054] data.CHLH_FadeInType0=0 [2025-09-24 16:09:55.054] data.WU_FadeInDelay=0 [2025-09-24 16:09:55.054] max_time_out=0 [2025-09-24 16:09:55.054] No splash screen [2025-09-24 16:09:55.054] stop dss Done [2025-09-24 16:09:55.102] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:09:55.139] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:09:55.139] /dev/mem opened. [2025-09-24 16:09:55.139] Memory mapped at address 0xffffa3057000. [2025-09-24 16:09:55.139] Read at address 0x00600018 (0xffffa3057018): 0x00000000 [2025-09-24 16:09:55.139] Write at address 0x00600018 (0xffffa3057018): 0x00400040, readback 0x00400040 [2025-09-24 16:09:55.220] Loaded PowerVR consumer services. [2025-09-24 16:09:55.376] 512+0 records in [2025-09-24 16:09:55.376] 512+0 records out [2025-09-24 16:09:55.376] Waiting data available... [2025-09-24 16:09:55.392] Starting syslogd/klogd: done [2025-09-24 16:09:55.407] DML Start [2025-09-24 16:09:55.568] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:09:55.792] DML res1: 0 [2025-09-24 16:09:56.284] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:09:56.284] Read Success [2025-09-24 16:09:56.284] Verifying certificate... [2025-09-24 16:09:56.509] Verified OK [2025-09-24 16:09:56.524] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:09:58.223] Verified OK [2025-09-24 16:09:58.223] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:09:58.847] Verified OK [2025-09-24 16:09:58.863] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:10:01.546] fs.protected_hardlinks = 1 [2025-09-24 16:10:01.546] fs.protected_symlinks = 1 [2025-09-24 16:10:01.546] kernel.modules_disabled = 1 [2025-09-24 16:10:01.738] [2025-09-24 16:10:01.738] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:10:02.897] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:10:10.637] SBL1:1210.0.1.0 [2025-09-24 16:10:10.684] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:10:12.251] SBL2:1210.0.1.0 [2025-09-24 16:10:12.298] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:10:12.394] j-A [2025-09-24 16:10:19.749] The R5 Autosar Classic is running [2025-09-24 16:10:19.773] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:10:19.773] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:10:20.381] INIT: version 2.96 booting [2025-09-24 16:10:20.492] INIT: Entering runlevel: 5 [2025-09-24 16:10:20.652] mtd24 attached [2025-09-24 16:10:20.668] mtd28 attached [2025-09-24 16:10:20.668] mtd32 attached [2025-09-24 16:10:20.716] ubi0:textures is mounted. [2025-09-24 16:10:20.784] RTNETLINK answers: File exists [2025-09-24 16:10:20.784] ubi1:animations is mounted. [2025-09-24 16:10:20.784] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:10:20.784] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:10:20.784] ubi2:dml_code is mounted. [2025-09-24 16:10:20.784] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:10:20.784] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:10:20.784] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:10:20.784] data.LB_FadeInType0=100 [2025-09-24 16:10:20.784] data.CHLH_FadeInType0=0 [2025-09-24 16:10:20.784] data.WU_FadeInDelay=0 [2025-09-24 16:10:20.784] max_time_out=0 [2025-09-24 16:10:20.784] No splash screen [2025-09-24 16:10:20.784] stop dss Done [2025-09-24 16:10:20.800] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:10:20.816] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:10:20.854] /dev/mem opened. [2025-09-24 16:10:20.854] Memory mapped at address 0xffffbd800000. [2025-09-24 16:10:20.854] Read at address 0x00600018 (0xffffbd800018): 0x00000000 [2025-09-24 16:10:20.854] Write at address 0x00600018 (0xffffbd800018): 0x00400040, readback 0x00400040 [2025-09-24 16:10:20.998] Loaded PowerVR consumer services. [2025-09-24 16:10:21.094] Waiting data available... [2025-09-24 16:10:21.094] 512+0 records in [2025-09-24 16:10:21.094] 512+0 records out [2025-09-24 16:10:21.126] Starting syslogd/klogd: done [2025-09-24 16:10:21.142] DML Start [2025-09-24 16:10:21.286] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:10:21.477] DML res1: 0 [2025-09-24 16:10:21.997] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:10:21.997] Read Success [2025-09-24 16:10:21.997] Verifying certificate... [2025-09-24 16:10:22.237] Verified OK [2025-09-24 16:10:22.253] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:10:23.931] Verified OK [2025-09-24 16:10:23.931] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:10:24.490] Verified OK [2025-09-24 16:10:24.490] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:10:27.048] fs.protected_hardlinks = 1 [2025-09-24 16:10:27.064] fs.protected_symlinks = 1 [2025-09-24 16:10:27.064] kernel.modules_disabled = 1 [2025-09-24 16:10:27.272] [2025-09-24 16:10:27.272] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:10:28.613] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:10:36.362] SBL1:1210.0.1.0 [2025-09-24 16:10:36.410] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 16:10:37.977] SBL2:1210.0.1.0 [2025-09-24 16:10:38.008] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:10:38.120] j-A [2025-09-24 16:10:45.494] The R5 Autosar Classic is running [2025-09-24 16:10:45.494] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:10:45.495] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:10:46.102] INIT: version 2.96 booting [2025-09-24 16:10:46.214] INIT: Entering runlevel: 5 [2025-09-24 16:10:46.374] mtd32 attached [2025-09-24 16:10:46.390] mtd28 attached [2025-09-24 16:10:46.390] mtd24 attached [2025-09-24 16:10:46.438] RTNETLINK answers: File exists [2025-09-24 16:10:46.484] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:10:46.484] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:10:46.484] ubi1:animations is mounted. [2025-09-24 16:10:46.484] ubi2:textures is mounted. [2025-09-24 16:10:46.484] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:10:46.484] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:10:46.484] ubi0:dml_code is mounted. [2025-09-24 16:10:46.484] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:10:46.508] data.LB_FadeInType0=100 [2025-09-24 16:10:46.508] data.CHLH_FadeInType0=0 [2025-09-24 16:10:46.508] data.WU_FadeInDelay=0 [2025-09-24 16:10:46.508] max_time_out=0 [2025-09-24 16:10:46.508] No splash screen [2025-09-24 16:10:46.508] stop dss Done [2025-09-24 16:10:46.552] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:10:46.552] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:10:46.586] /dev/mem opened. [2025-09-24 16:10:46.586] Memory mapped at address 0xffffb22eb000. [2025-09-24 16:10:46.586] Read at address 0x00600018 (0xffffb22eb018): 0x00000000 [2025-09-24 16:10:46.586] Write at address 0x00600018 (0xffffb22eb018): 0x00400040, readback 0x00400040 [2025-09-24 16:10:46.810] Loaded PowerVR consumer services. [2025-09-24 16:10:46.842] Waiting data available... [2025-09-24 16:10:46.842] 512+0 records in [2025-09-24 16:10:46.842] 512+0 records out [2025-09-24 16:10:46.874] Starting syslogd/klogd: done [2025-09-24 16:10:46.890] DML Start [2025-09-24 16:10:47.034] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:10:47.258] DML res1: 0 [2025-09-24 16:10:47.689] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:10:47.710] Read Success [2025-09-24 16:10:47.711] Verifying certificate... [2025-09-24 16:10:48.014] Verified OK [2025-09-24 16:10:48.030] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:10:49.638] Verified OK [2025-09-24 16:10:49.638] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:10:50.292] Verified OK [2025-09-24 16:10:50.292] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:10:52.978] fs.protected_hardlinks = 1 [2025-09-24 16:10:52.994] fs.protected_symlinks = 1 [2025-09-24 16:10:52.994] kernel.modules_disabled = 1 [2025-09-24 16:10:53.202] [2025-09-24 16:10:53.202] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:10:54.399] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:11:02.091] SBL1:1210.0.1.0 [2025-09-24 16:11:02.139] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:11:03.706] SBL2:1210.0.1.0 [2025-09-24 16:11:03.753] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:11:03.849] j-A [2025-09-24 16:11:11.204] The R5 Autosar Classic is running [2025-09-24 16:11:11.227] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:11:11.227] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:11:11.835] INIT: version 2.96 booting [2025-09-24 16:11:11.947] INIT: Entering runlevel: 5 [2025-09-24 16:11:12.108] mtd32 attached [2025-09-24 16:11:12.123] mtd24 attached [2025-09-24 16:11:12.123] mtd28 attached [2025-09-24 16:11:12.171] RTNETLINK answers: File exists [2025-09-24 16:11:12.218] ubi0:dml_code is mounted. [2025-09-24 16:11:12.218] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:11:12.218] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:11:12.218] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:11:12.218] ubi2:animations is mounted. [2025-09-24 16:11:12.218] ubi1:textures is mounted. [2025-09-24 16:11:12.218] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:11:12.218] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:11:12.240] data.LB_FadeInType0=100 [2025-09-24 16:11:12.240] data.CHLH_FadeInType0=0 [2025-09-24 16:11:12.240] data.WU_FadeInDelay=0 [2025-09-24 16:11:12.240] max_time_out=0 [2025-09-24 16:11:12.240] No splash screen [2025-09-24 16:11:12.240] stop dss Done [2025-09-24 16:11:12.311] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:11:12.311] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:11:12.311] /dev/mem opened. [2025-09-24 16:11:12.311] Memory mapped at address 0xffffba8fd000. [2025-09-24 16:11:12.311] Read at address 0x00600018 (0xffffba8fd018): 0x00000000 [2025-09-24 16:11:12.311] Write at address 0x00600018 (0xffffba8fd018): 0x00400040, readback 0x00400040 [2025-09-24 16:11:12.502] Loaded PowerVR consumer services. [2025-09-24 16:11:12.578] Waiting data available... [2025-09-24 16:11:12.578] 512+0 records in [2025-09-24 16:11:12.578] 512+0 records out [2025-09-24 16:11:12.610] Starting syslogd/klogd: done [2025-09-24 16:11:12.626] DML Start [2025-09-24 16:11:12.785] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:11:12.978] DML res1: 0 [2025-09-24 16:11:13.467] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:11:13.467] Read Success [2025-09-24 16:11:13.467] Verifying certificate... [2025-09-24 16:11:13.707] Verified OK [2025-09-24 16:11:13.723] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:11:15.398] Verified OK [2025-09-24 16:11:15.398] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:11:15.984] Verified OK [2025-09-24 16:11:15.984] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:11:18.654] fs.protected_hardlinks = 1 [2025-09-24 16:11:18.670] fs.protected_symlinks = 1 [2025-09-24 16:11:18.670] kernel.modules_disabled = 1 [2025-09-24 16:11:18.862] [2025-09-24 16:11:18.862] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:11:20.131] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:11:27.806] SBL1:1210.0.1.0 [2025-09-24 16:11:27.854] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:11:29.422] SBL2:1210.0.1.0 [2025-09-24 16:11:29.454] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:11:29.565] j-A [2025-09-24 16:11:36.920] The R5 Autosar Classic is running [2025-09-24 16:11:36.920] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:11:36.940] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:11:37.548] INIT: version 2.96 booting [2025-09-24 16:11:37.660] INIT: Entering runlevel: 5 [2025-09-24 16:11:37.805] mtd24 attached [2025-09-24 16:11:37.820] mtd32 attached [2025-09-24 16:11:37.820] mtd28 attached [2025-09-24 16:11:37.852] ubi0:textures is mounted. [2025-09-24 16:11:37.932] ubi1:dml_code is mounted. [2025-09-24 16:11:37.932] RTNETLINK answers: File exists [2025-09-24 16:11:37.932] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:11:37.932] ubi2:animations is mounted. [2025-09-24 16:11:37.932] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:11:37.932] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:11:37.932] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:11:37.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:11:37.932] data.LB_FadeInType0=100 [2025-09-24 16:11:37.932] data.CHLH_FadeInType0=0 [2025-09-24 16:11:37.932] data.WU_FadeInDelay=0 [2025-09-24 16:11:37.932] max_time_out=0 [2025-09-24 16:11:37.932] No splash screen [2025-09-24 16:11:37.932] stop dss Done [2025-09-24 16:11:38.012] /dev/mem opened. [2025-09-24 16:11:38.012] Memory mapped at address 0xffff9b4e0000. [2025-09-24 16:11:38.012] Read at address 0x00600018 (0xffff9b4e0018): 0x00000000 [2025-09-24 16:11:38.012] Write at address 0x00600018 (0xffff9b4e0018): 0x00400040, readback 0x00400040 [2025-09-24 16:11:38.028] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:11:38.060] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:11:38.235] Loaded PowerVR consumer services. [2025-09-24 16:11:38.280] 512+0 records in [2025-09-24 16:11:38.280] 512+0 records out [2025-09-24 16:11:38.280] Waiting data available... [2025-09-24 16:11:38.296] Starting syslogd/klogd: done [2025-09-24 16:11:38.312] DML Start [2025-09-24 16:11:38.472] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:11:38.711] DML res1: 0 [2025-09-24 16:11:39.150] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:11:39.150] Read Success [2025-09-24 16:11:39.150] Verifying certificate... [2025-09-24 16:11:39.405] Verified OK [2025-09-24 16:11:39.421] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:11:41.148] Verified OK [2025-09-24 16:11:41.148] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:11:41.772] Verified OK [2025-09-24 16:11:41.772] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:11:44.362] fs.protected_hardlinks = 1 [2025-09-24 16:11:44.362] fs.protected_symlinks = 1 [2025-09-24 16:11:44.378] kernel.modules_disabled = 1 [2025-09-24 16:11:44.569] [2025-09-24 16:11:44.569] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:11:45.810] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:11:53.543] SBL1:1210.0.1.0 [2025-09-24 16:11:53.591] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:11:55.158] SBL2:1210.0.1.0 [2025-09-24 16:11:55.206] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:11:55.302] j-A [2025-09-24 16:12:02.656] The R5 Autosar Classic is running [2025-09-24 16:12:02.656] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:12:02.677] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:12:03.285] INIT: version 2.96 booting [2025-09-24 16:12:03.396] INIT: Entering runlevel: 5 [2025-09-24 16:12:03.556] mtd32 attached [2025-09-24 16:12:03.556] mtd28 attached [2025-09-24 16:12:03.572] mtd24 attached [2025-09-24 16:12:03.620] RTNETLINK answers: File exists [2025-09-24 16:12:03.620] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:12:03.663] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:12:03.663] ubi1:animations is mounted. [2025-09-24 16:12:03.663] ubi2:textures is mounted. [2025-09-24 16:12:03.663] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:12:03.663] ubi0:dml_code is mounted. [2025-09-24 16:12:03.663] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:12:03.663] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:12:03.663] data.LB_FadeInType0=100 [2025-09-24 16:12:03.684] data.CHLH_FadeInType0=0 [2025-09-24 16:12:03.684] data.WU_FadeInDelay=0 [2025-09-24 16:12:03.684] max_time_out=0 [2025-09-24 16:12:03.684] No splash screen [2025-09-24 16:12:03.684] stop dss Done [2025-09-24 16:12:03.699] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:12:03.699] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:12:03.732] /dev/mem opened. [2025-09-24 16:12:03.732] Memory mapped at address 0xffff830c0000. [2025-09-24 16:12:03.758] Read at address 0x00600018 (0xffff830c0018): 0x00000000 [2025-09-24 16:12:03.758] Write at address 0x00600018 (0xffff830c0018): 0x00400040, readback 0x00400040 [2025-09-24 16:12:03.854] Loaded PowerVR consumer services. [2025-09-24 16:12:04.006] Waiting data available... [2025-09-24 16:12:04.006] 512+0 records in [2025-09-24 16:12:04.006] 512+0 records out [2025-09-24 16:12:04.023] Starting syslogd/klogd: done [2025-09-24 16:12:04.039] DML Start [2025-09-24 16:12:04.199] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:12:04.407] DML res1: 0 [2025-09-24 16:12:04.886] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:12:04.907] Read Success [2025-09-24 16:12:04.907] Verifying certificate... [2025-09-24 16:12:05.131] Verified OK [2025-09-24 16:12:05.147] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:12:06.682] Verified OK [2025-09-24 16:12:06.682] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:12:07.354] Verified OK [2025-09-24 16:12:07.354] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:12:10.136] fs.protected_hardlinks = 1 [2025-09-24 16:12:10.136] fs.protected_symlinks = 1 [2025-09-24 16:12:10.152] kernel.modules_disabled = 1 [2025-09-24 16:12:10.344] [2025-09-24 16:12:10.344] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:12:11.527] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:12:19.259] SBL1:1210.0.1.0 [2025-09-24 16:12:19.291] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:12:20.873] SBL2:1210.0.1.0 [2025-09-24 16:12:20.905] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:12:21.016] j-A [2025-09-24 16:12:28.355] The R5 Autosar Classic is running [2025-09-24 16:12:28.386] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:12:28.386] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:12:28.994] INIT: version 2.96 booting [2025-09-24 16:12:29.089] INIT: Entering runlevel: 5 [2025-09-24 16:12:29.249] mtd24 attached [2025-09-24 16:12:29.265] mtd32 attached [2025-09-24 16:12:29.281] mtd28 attached [2025-09-24 16:12:29.297] ubi0:textures is mounted. [2025-09-24 16:12:29.329] RTNETLINK answers: File exists [2025-09-24 16:12:29.384] ubi2:animations is mounted. [2025-09-24 16:12:29.384] ubi1:dml_code is mounted. [2025-09-24 16:12:29.384] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:12:29.384] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:12:29.384] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:12:29.384] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:12:29.384] data.LB_FadeInType0=100 [2025-09-24 16:12:29.384] data.CHLH_FadeInType0=0 [2025-09-24 16:12:29.384] data.WU_FadeInDelay=0 [2025-09-24 16:12:29.384] max_time_out=0 [2025-09-24 16:12:29.384] No splash screen [2025-09-24 16:12:29.384] stop dss Done [2025-09-24 16:12:29.384] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:12:29.465] /dev/mem opened. [2025-09-24 16:12:29.465] Memory mapped at address 0xffff815d0000. [2025-09-24 16:12:29.465] Read at address 0x00600018 (0xffff815d0018): 0x00000000 [2025-09-24 16:12:29.465] Write at address 0x00600018 (0xffff815d0018): 0x00400040, readback 0x00400040 [2025-09-24 16:12:29.465] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:12:29.481] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:12:29.657] Loaded PowerVR consumer services. [2025-09-24 16:12:29.715] Waiting data available... [2025-09-24 16:12:29.715] 512+0 records in [2025-09-24 16:12:29.715] 512+0 records out [2025-09-24 16:12:29.747] Starting syslogd/klogd: done [2025-09-24 16:12:29.763] DML Start [2025-09-24 16:12:29.940] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:12:30.179] DML res1: 0 [2025-09-24 16:12:30.579] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:12:30.595] Read Success [2025-09-24 16:12:30.595] Verifying certificate... [2025-09-24 16:12:30.835] Verified OK [2025-09-24 16:12:30.851] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:12:32.459] Verified OK [2025-09-24 16:12:32.459] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:12:33.146] Verified OK [2025-09-24 16:12:33.146] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:12:35.833] fs.protected_hardlinks = 1 [2025-09-24 16:12:35.848] fs.protected_symlinks = 1 [2025-09-24 16:12:35.848] kernel.modules_disabled = 1 [2025-09-24 16:12:36.040] [2025-09-24 16:12:36.040] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:12:37.301] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:12:44.959] SBL1:1210.0.1.0 [2025-09-24 16:12:45.007] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:12:46.574] SBL2:1210.0.1.0 [2025-09-24 16:12:46.606] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:12:46.717] j-A [2025-09-24 16:12:54.071] The R5 Autosar Classic is running [2025-09-24 16:12:54.092] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:12:54.092] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:12:54.700] INIT: version 2.96 booting [2025-09-24 16:12:54.811] INIT: Entering runlevel: 5 [2025-09-24 16:12:54.955] mtd24 attached [2025-09-24 16:12:54.987] mtd28 attached [2025-09-24 16:12:55.003] mtd32 attached [2025-09-24 16:12:55.019] ubi0:textures is mounted. [2025-09-24 16:12:55.035] RTNETLINK answers: File exists [2025-09-24 16:12:55.094] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:12:55.094] ubi1:animations is mounted. [2025-09-24 16:12:55.094] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:12:55.094] ubi2:dml_code is mounted. [2025-09-24 16:12:55.094] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:12:55.094] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:12:55.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:12:55.094] data.LB_FadeInType0=100 [2025-09-24 16:12:55.094] data.CHLH_FadeInType0=0 [2025-09-24 16:12:55.094] data.WU_FadeInDelay=0 [2025-09-24 16:12:55.094] max_time_out=0 [2025-09-24 16:12:55.094] No splash screen [2025-09-24 16:12:55.094] stop dss Done [2025-09-24 16:12:55.126] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:12:55.142] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:12:55.176] /dev/mem opened. [2025-09-24 16:12:55.176] Memory mapped at address 0xffff8c3b5000. [2025-09-24 16:12:55.176] Read at address 0x00600018 (0xffff8c3b5018): 0x00000000 [2025-09-24 16:12:55.176] Write at address 0x00600018 (0xffff8c3b5018): 0x00400040, readback 0x00400040 [2025-09-24 16:12:55.287] Loaded PowerVR consumer services. [2025-09-24 16:12:55.416] 512+0 records in [2025-09-24 16:12:55.416] 512+0 records out [2025-09-24 16:12:55.432] Waiting data available... [2025-09-24 16:12:55.463] Starting syslogd/klogd: done [2025-09-24 16:12:55.479] DML Start [2025-09-24 16:12:55.656] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:12:55.879] DML res1: 0 [2025-09-24 16:12:56.324] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:12:56.324] Read Success [2025-09-24 16:12:56.324] Verifying certificate... [2025-09-24 16:12:56.548] Verified OK [2025-09-24 16:12:56.564] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:12:58.269] Verified OK [2025-09-24 16:12:58.269] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:12:58.813] Verified OK [2025-09-24 16:12:58.834] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:13:01.313] fs.protected_hardlinks = 1 [2025-09-24 16:13:01.328] fs.protected_symlinks = 1 [2025-09-24 16:13:01.329] kernel.modules_disabled = 1 [2025-09-24 16:13:01.520] [2025-09-24 16:13:01.520] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:13:03.002] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:13:10.673] SBL1:1210.0.1.0 [2025-09-24 16:13:10.721] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:13:12.288] SBL2:1210.0.1.0 [2025-09-24 16:13:12.336] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:13:12.432] j-A [2025-09-24 16:13:19.784] The R5 Autosar Classic is running [2025-09-24 16:13:19.809] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:13:19.809] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:13:20.417] INIT: version 2.96 booting [2025-09-24 16:13:20.529] INIT: Entering runlevel: 5 [2025-09-24 16:13:20.689] mtd24 attached [2025-09-24 16:13:20.689] mtd28 attached [2025-09-24 16:13:20.705] mtd32 attached [2025-09-24 16:13:20.753] ubi1:animations is mounted. [2025-09-24 16:13:20.753] RTNETLINK answers: File exists [2025-09-24 16:13:20.815] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:13:20.815] ubi0:textures is mounted. [2025-09-24 16:13:20.815] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:13:20.815] ubi2:dml_code is mounted. [2025-09-24 16:13:20.815] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:13:20.815] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:13:20.815] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:13:20.815] data.LB_FadeInType0=100 [2025-09-24 16:13:20.815] data.CHLH_FadeInType0=0 [2025-09-24 16:13:20.815] data.WU_FadeInDelay=0 [2025-09-24 16:13:20.815] max_time_out=0 [2025-09-24 16:13:20.815] No splash screen [2025-09-24 16:13:20.815] stop dss Done [2025-09-24 16:13:20.895] /dev/mem opened. [2025-09-24 16:13:20.895] Memory mapped at address 0xffff90853000. [2025-09-24 16:13:20.895] Read at address 0x00600018 (0xffff90853018): 0x00000000 [2025-09-24 16:13:20.895] Write at address 0x00600018 (0xffff90853018): 0x00400040, readback 0x00400040 [2025-09-24 16:13:20.895] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:13:20.895] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:13:21.007] Loaded PowerVR consumer services. [2025-09-24 16:13:21.135] 512+0 records in [2025-09-24 16:13:21.135] 512+0 records out [2025-09-24 16:13:21.151] Waiting data available... [2025-09-24 16:13:21.182] Starting syslogd/klogd: done [2025-09-24 16:13:21.198] DML Start [2025-09-24 16:13:21.391] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:13:21.631] DML res1: 0 [2025-09-24 16:13:22.046] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:13:22.067] Read Success [2025-09-24 16:13:22.067] Verifying certificate... [2025-09-24 16:13:22.355] Verified OK [2025-09-24 16:13:22.371] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:13:24.092] Verified OK [2025-09-24 16:13:24.092] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:13:24.667] Verified OK [2025-09-24 16:13:24.667] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:13:27.209] fs.protected_hardlinks = 1 [2025-09-24 16:13:27.209] fs.protected_symlinks = 1 [2025-09-24 16:13:27.225] kernel.modules_disabled = 1 [2025-09-24 16:13:27.432] [2025-09-24 16:13:27.432] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:13:28.701] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:13:36.399] SBL1:1210.0.1.0 [2025-09-24 16:13:36.431] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:13:38.014] SBL2:1210.0.1.0 [2025-09-24 16:13:38.046] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:13:38.158] j-A [2025-09-24 16:13:45.529] The R5 Autosar Classic is running [2025-09-24 16:13:45.529] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:13:45.529] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:13:46.136] INIT: version 2.96 booting [2025-09-24 16:13:46.248] INIT: Entering runlevel: 5 [2025-09-24 16:13:46.392] mtd28 attached [2025-09-24 16:13:46.408] mtd32 attached [2025-09-24 16:13:46.440] mtd24 attached [2025-09-24 16:13:46.440] ubi0:animations is mounted. [2025-09-24 16:13:46.456] ubi1:dml_code is mounted. [2025-09-24 16:13:46.472] RTNETLINK answers: File exists [2025-09-24 16:13:46.527] ubi2:textures is mounted. [2025-09-24 16:13:46.527] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:13:46.527] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:13:46.527] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:13:46.527] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:13:46.527] data.LB_FadeInType0=100 [2025-09-24 16:13:46.527] data.CHLH_FadeInType0=0 [2025-09-24 16:13:46.527] data.WU_FadeInDelay=0 [2025-09-24 16:13:46.527] max_time_out=0 [2025-09-24 16:13:46.527] No splash screen [2025-09-24 16:13:46.527] stop dss Done [2025-09-24 16:13:46.527] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:13:46.559] /dev/mem opened. [2025-09-24 16:13:46.559] Memory mapped at address 0xffff8f57a000. [2025-09-24 16:13:46.591] Read at address 0x00600018 (0xffff8f57a018): 0x00000000 [2025-09-24 16:13:46.591] Write at address 0x00600018 (0xffff8f57a018): 0x00400040, readback 0x00400040 [2025-09-24 16:13:46.591] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:13:46.591] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:13:46.752] Loaded PowerVR consumer services. [2025-09-24 16:13:46.847] Waiting data available... [2025-09-24 16:13:46.863] 512+0 records in [2025-09-24 16:13:46.863] 512+0 records out [2025-09-24 16:13:46.911] Starting syslogd/klogd: done [2025-09-24 16:13:46.928] DML Start [2025-09-24 16:13:47.119] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:13:47.343] DML res1: 0 [2025-09-24 16:13:47.701] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:13:47.701] Read Success [2025-09-24 16:13:47.701] Verifying certificate... [2025-09-24 16:13:47.957] Verified OK [2025-09-24 16:13:47.973] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:13:49.747] Verified OK [2025-09-24 16:13:49.747] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:13:50.322] Verified OK [2025-09-24 16:13:50.322] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:13:52.815] fs.protected_hardlinks = 1 [2025-09-24 16:13:52.815] fs.protected_symlinks = 1 [2025-09-24 16:13:52.831] kernel.modules_disabled = 1 [2025-09-24 16:13:53.024] [2025-09-24 16:13:53.024] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:13:54.425] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:14:02.122] SBL1:1210.0.1.0 [2025-09-24 16:14:02.153] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:14:03.721] SBL2:1210.0.1.0 [2025-09-24 16:14:03.769] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:14:03.864] j-A [2025-09-24 16:14:11.218] The R5 Autosar Classic is running [2025-09-24 16:14:11.242] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:14:11.242] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:14:11.849] INIT: version 2.96 booting [2025-09-24 16:14:11.961] INIT: Entering runlevel: 5 [2025-09-24 16:14:12.105] mtd28 attached [2025-09-24 16:14:12.121] mtd24 attached [2025-09-24 16:14:12.137] mtd32 attached [2025-09-24 16:14:12.185] RTNETLINK answers: File exists [2025-09-24 16:14:12.246] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:14:12.246] ubi0:animations is mounted. [2025-09-24 16:14:12.246] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:14:12.246] ubi1:textures is mounted. [2025-09-24 16:14:12.246] ubi2:dml_code is mounted. [2025-09-24 16:14:12.246] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:14:12.246] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:14:12.246] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:14:12.246] data.LB_FadeInType0=100 [2025-09-24 16:14:12.246] data.CHLH_FadeInType0=0 [2025-09-24 16:14:12.246] data.WU_FadeInDelay=0 [2025-09-24 16:14:12.246] max_time_out=0 [2025-09-24 16:14:12.246] No splash screen [2025-09-24 16:14:12.246] stop dss Done [2025-09-24 16:14:12.330] /dev/mem opened. [2025-09-24 16:14:12.330] Memory mapped at address 0xffffa269c000. [2025-09-24 16:14:12.330] Read at address 0x00600018 (0xffffa269c018): 0x00000000 [2025-09-24 16:14:12.330] Write at address 0x00600018 (0xffffa269c018): 0x00400040, readback 0x00400040 [2025-09-24 16:14:12.330] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:14:12.346] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:14:12.539] Loaded PowerVR consumer services. [2025-09-24 16:14:12.582] Waiting data available... [2025-09-24 16:14:12.582] 512+0 records in [2025-09-24 16:14:12.582] 512+0 records out [2025-09-24 16:14:12.598] Starting syslogd/klogd: done [2025-09-24 16:14:12.614] DML Start [2025-09-24 16:14:12.806] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:14:13.013] DML res1: 0 [2025-09-24 16:14:13.461] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:14:13.483] Read Success [2025-09-24 16:14:13.483] Verifying certificate... [2025-09-24 16:14:13.706] Verified OK [2025-09-24 16:14:13.722] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:14:15.268] Verified OK [2025-09-24 16:14:15.268] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:14:15.903] Verified OK [2025-09-24 16:14:15.903] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:14:18.653] fs.protected_hardlinks = 1 [2025-09-24 16:14:18.653] fs.protected_symlinks = 1 [2025-09-24 16:14:18.669] kernel.modules_disabled = 1 [2025-09-24 16:14:18.861] [2025-09-24 16:14:18.861] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:14:20.112] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:14:27.824] SBL1:1210.0.1.0 [2025-09-24 16:14:27.856] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:14:29.439] SBL2:1210.0.1.0 [2025-09-24 16:14:29.471] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:14:29.583] j-A [2025-09-24 16:14:36.954] The R5 Autosar Classic is running [2025-09-24 16:14:36.954] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:14:36.954] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:14:37.562] INIT: version 2.96 booting [2025-09-24 16:14:37.674] INIT: Entering runlevel: 5 [2025-09-24 16:14:37.818] mtd24 attached [2025-09-24 16:14:37.834] mtd28 attached [2025-09-24 16:14:37.850] mtd32 attached [2025-09-24 16:14:37.882] ubi0:textures is mounted. [2025-09-24 16:14:37.898] RTNETLINK answers: File exists [2025-09-24 16:14:37.951] ubi1:animations is mounted. [2025-09-24 16:14:37.951] ubi2:dml_code is mounted. [2025-09-24 16:14:37.951] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:14:37.951] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:14:37.951] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:14:37.951] data.LB_FadeInType0=100 [2025-09-24 16:14:37.951] data.CHLH_FadeInType0=0 [2025-09-24 16:14:37.951] data.WU_FadeInDelay=0 [2025-09-24 16:14:37.951] max_time_out=0 [2025-09-24 16:14:37.951] No splash screen [2025-09-24 16:14:37.951] stop dss Done [2025-09-24 16:14:37.951] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:14:37.951] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:14:37.999] /dev/mem opened. [2025-09-24 16:14:37.999] Memory mapped at address 0xffff924d8000. [2025-09-24 16:14:38.025] Read at address 0x00600018 (0xffff924d8018): 0x00000000 [2025-09-24 16:14:38.025] Write at address 0x00600018 (0xffff924d8018): 0x00400040, readback 0x00400040 [2025-09-24 16:14:38.041] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:14:38.073] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:14:38.233] Loaded PowerVR consumer services. [2025-09-24 16:14:38.265] Waiting data available... [2025-09-24 16:14:38.280] 512+0 records in [2025-09-24 16:14:38.297] 512+0 records out [2025-09-24 16:14:38.312] Starting syslogd/klogd: done [2025-09-24 16:14:38.328] DML Start [2025-09-24 16:14:38.537] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:14:38.761] DML res1: 0 [2025-09-24 16:14:39.207] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:14:39.207] Read Success [2025-09-24 16:14:39.207] Verifying certificate... [2025-09-24 16:14:39.479] Verified OK [2025-09-24 16:14:39.495] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:14:41.183] Verified OK [2025-09-24 16:14:41.183] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:14:41.804] Verified OK [2025-09-24 16:14:41.804] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:14:44.394] fs.protected_hardlinks = 1 [2025-09-24 16:14:44.410] fs.protected_symlinks = 1 [2025-09-24 16:14:44.426] kernel.modules_disabled = 1 [2025-09-24 16:14:44.618] [2025-09-24 16:14:44.618] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:14:45.839] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:14:53.525] SBL1:1210.0.1.0 [2025-09-24 16:14:53.573] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:14:55.139] SBL2:1210.0.1.0 [2025-09-24 16:14:55.171] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:14:55.283] j-A [2025-09-24 16:15:02.638] The R5 Autosar Classic is running [2025-09-24 16:15:02.638] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:15:02.659] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:15:03.266] INIT: version 2.96 booting [2025-09-24 16:15:03.378] INIT: Entering runlevel: 5 [2025-09-24 16:15:03.522] mtd24 attached [2025-09-24 16:15:03.538] mtd28 attached [2025-09-24 16:15:03.554] mtd32 attached [2025-09-24 16:15:03.570] ubi0:textures is mounted. [2025-09-24 16:15:03.601] ubi1:animations is mounted. [2025-09-24 16:15:03.602] RTNETLINK answers: File exists [2025-09-24 16:15:03.663] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:15:03.663] ubi2:dml_code is mounted. [2025-09-24 16:15:03.663] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:15:03.663] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:15:03.663] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:15:03.663] data.LB_FadeInType0=100 [2025-09-24 16:15:03.663] data.CHLH_FadeInType0=0 [2025-09-24 16:15:03.664] data.WU_FadeInDelay=0 [2025-09-24 16:15:03.664] max_time_out=0 [2025-09-24 16:15:03.664] No splash screen [2025-09-24 16:15:03.664] stop dss Done [2025-09-24 16:15:03.664] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:15:03.739] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:15:03.739] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:15:03.739] /dev/mem opened. [2025-09-24 16:15:03.739] Memory mapped at address 0xffffb1561000. [2025-09-24 16:15:03.739] Read at address 0x00600018 (0xffffb1561018): 0x00000000 [2025-09-24 16:15:03.739] Write at address 0x00600018 (0xffffb1561018): 0x00400040, readback 0x00400040 [2025-09-24 16:15:03.820] Loaded PowerVR consumer services. [2025-09-24 16:15:03.963] Waiting data available... [2025-09-24 16:15:03.979] 512+0 records in [2025-09-24 16:15:03.979] 512+0 records out [2025-09-24 16:15:03.995] Starting syslogd/klogd: done [2025-09-24 16:15:04.027] DML Start [2025-09-24 16:15:04.235] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:15:04.507] DML res1: 0 [2025-09-24 16:15:04.873] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:15:04.873] Read Success [2025-09-24 16:15:04.873] Verifying certificate... [2025-09-24 16:15:05.128] Verified OK [2025-09-24 16:15:05.144] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:15:06.799] Verified OK [2025-09-24 16:15:06.799] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:15:07.399] Verified OK [2025-09-24 16:15:07.399] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:15:10.053] fs.protected_hardlinks = 1 [2025-09-24 16:15:10.053] fs.protected_symlinks = 1 [2025-09-24 16:15:10.069] kernel.modules_disabled = 1 [2025-09-24 16:15:10.260] [2025-09-24 16:15:10.260] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:15:11.518] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:15:19.258] SBL1:1210.0.1.0 [2025-09-24 16:15:19.290] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:15:20.873] SBL2:1210.0.1.0 [2025-09-24 16:15:20.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:15:21.016] j-A [2025-09-24 16:15:28.355] The R5 Autosar Classic is running [2025-09-24 16:15:28.380] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:15:28.380] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:15:28.987] INIT: version 2.96 booting [2025-09-24 16:15:29.099] INIT: Entering runlevel: 5 [2025-09-24 16:15:29.259] mtd28 attached [2025-09-24 16:15:29.275] mtd24 attached [2025-09-24 16:15:29.290] mtd32 attached [2025-09-24 16:15:29.306] ubi0:animations is mounted. [2025-09-24 16:15:29.391] RTNETLINK answers: File exists [2025-09-24 16:15:29.391] ubi1:textures is mounted. [2025-09-24 16:15:29.391] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:15:29.391] ubi2:dml_code is mounted. [2025-09-24 16:15:29.391] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:15:29.391] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:15:29.391] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:15:29.391] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:15:29.391] data.LB_FadeInType0=100 [2025-09-24 16:15:29.391] data.CHLH_FadeInType0=0 [2025-09-24 16:15:29.391] data.WU_FadeInDelay=0 [2025-09-24 16:15:29.391] max_time_out=0 [2025-09-24 16:15:29.391] No splash screen [2025-09-24 16:15:29.391] stop dss Done [2025-09-24 16:15:29.439] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:15:29.439] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:15:29.470] /dev/mem opened. [2025-09-24 16:15:29.470] Memory mapped at address 0xffff8fcca000. [2025-09-24 16:15:29.470] Read at address 0x00600018 (0xffff8fcca018): 0x00000000 [2025-09-24 16:15:29.470] Write at address 0x00600018 (0xffff8fcca018): 0x00400040, readback 0x00400040 [2025-09-24 16:15:29.694] Loaded PowerVR consumer services. [2025-09-24 16:15:29.726] 512+0 records in [2025-09-24 16:15:29.726] 512+0 records out [2025-09-24 16:15:29.758] Starting syslogd/klogd: Waiting data available... [2025-09-24 16:15:29.758] done [2025-09-24 16:15:29.774] DML Start [2025-09-24 16:15:29.966] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:15:30.190] DML res1: 0 [2025-09-24 16:15:30.637] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:15:30.653] Read Success [2025-09-24 16:15:30.653] Verifying certificate... [2025-09-24 16:15:30.878] Verified OK [2025-09-24 16:15:30.893] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:15:32.652] Verified OK [2025-09-24 16:15:32.668] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:15:33.238] Verified OK [2025-09-24 16:15:33.238] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:15:35.715] fs.protected_hardlinks = 1 [2025-09-24 16:15:35.743] fs.protected_symlinks = 1 [2025-09-24 16:15:35.743] kernel.modules_disabled = 1 [2025-09-24 16:15:35.919] [2025-09-24 16:15:35.919] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:15:37.277] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:15:44.946] SBL1:1210.0.1.0 [2025-09-24 16:15:44.994] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:15:46.560] SBL2:1210.0.1.0 [2025-09-24 16:15:46.608] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:15:46.705] j-A [2025-09-24 16:15:54.060] The R5 Autosar Classic is running [2025-09-24 16:15:54.081] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:15:54.081] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:15:54.688] INIT: version 2.96 booting [2025-09-24 16:15:54.800] INIT: Entering runlevel: 5 [2025-09-24 16:15:54.960] mtd24 attached [2025-09-24 16:15:54.960] mtd32 attached [2025-09-24 16:15:54.976] mtd28 attached [2025-09-24 16:15:55.024] RTNETLINK answers: File exists [2025-09-24 16:15:55.090] ubi2:animations is mounted. [2025-09-24 16:15:55.090] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:15:55.090] ubi1:dml_code is mounted. [2025-09-24 16:15:55.090] ubi0:textures is mounted. [2025-09-24 16:15:55.090] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:15:55.090] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:15:55.090] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:15:55.090] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:15:55.090] data.LB_FadeInType0=100 [2025-09-24 16:15:55.090] data.CHLH_FadeInType0=0 [2025-09-24 16:15:55.090] data.WU_FadeInDelay=0 [2025-09-24 16:15:55.090] max_time_out=0 [2025-09-24 16:15:55.090] No splash screen [2025-09-24 16:15:55.090] stop dss Done [2025-09-24 16:15:55.122] /dev/mem opened. [2025-09-24 16:15:55.122] Memory mapped at address 0xffffb1925000. [2025-09-24 16:15:55.159] Read at address 0x00600018 (0xffffb1925018): 0x00000000 [2025-09-24 16:15:55.159] Write at address 0x00600018 (0xffffb1925018): 0x00400040, readback 0x00400040 [2025-09-24 16:15:55.159] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:15:55.159] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:15:55.271] Loaded PowerVR consumer services. [2025-09-24 16:15:55.414] 512+0 records in [2025-09-24 16:15:55.414] 512+0 records out [2025-09-24 16:15:55.431] Waiting data available... [2025-09-24 16:15:55.447] Starting syslogd/klogd: done [2025-09-24 16:15:55.463] DML Start [2025-09-24 16:15:55.670] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:15:55.927] DML res1: 0 [2025-09-24 16:15:56.321] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:15:56.321] Read Success [2025-09-24 16:15:56.321] Verifying certificate... [2025-09-24 16:15:56.593] Verified OK [2025-09-24 16:15:56.608] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:15:58.298] Verified OK [2025-09-24 16:15:58.298] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:15:58.913] Verified OK [2025-09-24 16:15:58.913] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:16:01.486] fs.protected_hardlinks = 1 [2025-09-24 16:16:01.486] fs.protected_symlinks = 1 [2025-09-24 16:16:01.502] kernel.modules_disabled = 1 [2025-09-24 16:16:01.695] [2025-09-24 16:16:01.695] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:16:02.966] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:16:10.675] SBL1:1210.0.1.0 [2025-09-24 16:16:10.723] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:16:12.290] SBL2:1210.0.1.0 [2025-09-24 16:16:12.322] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:16:12.433] j-A [2025-09-24 16:16:19.809] The R5 Autosar Classic is running [2025-09-24 16:16:19.809] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:16:19.809] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:16:20.416] INIT: version 2.96 booting [2025-09-24 16:16:20.527] INIT: Entering runlevel: 5 [2025-09-24 16:16:20.672] mtd32 attached [2025-09-24 16:16:20.688] mtd28 attached [2025-09-24 16:16:20.688] mtd24 attached [2025-09-24 16:16:20.784] RTNETLINK answers: File exists [2025-09-24 16:16:20.784] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:16:20.784] ubi2:textures is mounted. [2025-09-24 16:16:20.784] ubi0:dml_code is mounted. [2025-09-24 16:16:20.784] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:16:20.784] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:16:20.784] ubi1:animations is mounted. [2025-09-24 16:16:20.784] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:16:20.784] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:16:20.809] data.LB_FadeInType0=100 [2025-09-24 16:16:20.809] data.CHLH_FadeInType0=0 [2025-09-24 16:16:20.809] data.WU_FadeInDelay=0 [2025-09-24 16:16:20.809] max_time_out=0 [2025-09-24 16:16:20.809] No splash screen [2025-09-24 16:16:20.809] stop dss Done [2025-09-24 16:16:20.825] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:16:20.841] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:16:20.857] /dev/mem opened. [2025-09-24 16:16:20.857] Memory mapped at address 0xffff9f6c0000. [2025-09-24 16:16:20.883] Read at address 0x00600018 (0xffff9f6c0018): 0x00000000 [2025-09-24 16:16:20.883] Write at address 0x00600018 (0xffff9f6c0018): 0x00400040, readback 0x00400040 [2025-09-24 16:16:21.107] Loaded PowerVR consumer services. [2025-09-24 16:16:21.139] Waiting data available... [2025-09-24 16:16:21.139] 512+0 records in [2025-09-24 16:16:21.154] 512+0 records out [2025-09-24 16:16:21.202] Starting syslogd/klogd: done [2025-09-24 16:16:21.218] DML Start [2025-09-24 16:16:21.379] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:16:21.618] DML res1: 0 [2025-09-24 16:16:22.000] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:16:22.000] Read Success [2025-09-24 16:16:22.000] Verifying certificate... [2025-09-24 16:16:22.224] Verified OK [2025-09-24 16:16:22.240] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:16:23.791] Verified OK [2025-09-24 16:16:23.791] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:16:24.382] Verified OK [2025-09-24 16:16:24.382] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:16:27.164] fs.protected_hardlinks = 1 [2025-09-24 16:16:27.179] fs.protected_symlinks = 1 [2025-09-24 16:16:27.179] kernel.modules_disabled = 1 [2025-09-24 16:16:27.387] [2025-09-24 16:16:27.387] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:16:28.714] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:16:36.390] SBL1:1210.0.1.0 [2025-09-24 16:16:36.438] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:16:38.004] SBL2:1210.0.1.0 [2025-09-24 16:16:38.036] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:16:38.149] j-A [2025-09-24 16:16:45.523] The R5 Autosar Classic is running [2025-09-24 16:16:45.523] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:16:45.523] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:16:46.130] INIT: version 2.96 booting [2025-09-24 16:16:46.226] INIT: Entering runlevel: 5 [2025-09-24 16:16:46.385] mtd24 attached [2025-09-24 16:16:46.401] mtd32 attached [2025-09-24 16:16:46.401] mtd28 attached [2025-09-24 16:16:46.434] ubi0:textures is mounted. [2025-09-24 16:16:46.450] RTNETLINK answers: File exists [2025-09-24 16:16:46.514] ubi1:dml_code is mounted. [2025-09-24 16:16:46.514] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:16:46.514] ubi2:animations is mounted. [2025-09-24 16:16:46.514] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:16:46.514] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:16:46.514] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:16:46.514] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:16:46.514] data.LB_FadeInType0=100 [2025-09-24 16:16:46.514] data.CHLH_FadeInType0=0 [2025-09-24 16:16:46.514] data.WU_FadeInDelay=0 [2025-09-24 16:16:46.514] max_time_out=0 [2025-09-24 16:16:46.514] No splash screen [2025-09-24 16:16:46.514] stop dss Done [2025-09-24 16:16:46.597] /dev/mem opened. [2025-09-24 16:16:46.597] Memory mapped at address 0xffffa971d000. [2025-09-24 16:16:46.597] Read at address 0x00600018 (0xffffa971d018): 0x00000000 [2025-09-24 16:16:46.597] Write at address 0x00600018 (0xffffa971d018): 0x00400040, readback 0x00400040 [2025-09-24 16:16:46.597] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:16:46.597] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:16:46.789] Loaded PowerVR consumer services. [2025-09-24 16:16:46.837] 512+0 records in [2025-09-24 16:16:46.853] 512+0 records out [2025-09-24 16:16:46.853] Waiting data available... [2025-09-24 16:16:46.885] Starting syslogd/klogd: done [2025-09-24 16:16:46.901] DML Start [2025-09-24 16:16:47.061] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:16:47.285] DML res1: 0 [2025-09-24 16:16:47.765] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:16:47.786] Read Success [2025-09-24 16:16:47.786] Verifying certificate... [2025-09-24 16:16:48.074] Verified OK [2025-09-24 16:16:48.090] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:16:49.816] Verified OK [2025-09-24 16:16:49.816] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:16:50.454] Verified OK [2025-09-24 16:16:50.454] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:16:53.044] fs.protected_hardlinks = 1 [2025-09-24 16:16:53.044] fs.protected_symlinks = 1 [2025-09-24 16:16:53.060] kernel.modules_disabled = 1 [2025-09-24 16:16:53.251] [2025-09-24 16:16:53.251] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:16:54.338] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:17:02.091] SBL1:1210.0.1.0 [2025-09-24 16:17:02.139] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:17:03.705] SBL2:1210.0.1.0 [2025-09-24 16:17:03.737] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:17:03.849] j-A [2025-09-24 16:17:11.204] The R5 Autosar Classic is running [2025-09-24 16:17:11.204] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:17:11.225] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:17:11.832] INIT: version 2.96 booting [2025-09-24 16:17:11.944] INIT: Entering runlevel: 5 [2025-09-24 16:17:12.104] mtd32 attached [2025-09-24 16:17:12.120] mtd28 attached [2025-09-24 16:17:12.120] mtd24 attached [2025-09-24 16:17:12.168] RTNETLINK answers: File exists [2025-09-24 16:17:12.168] ubi0:dml_code is mounted. [2025-09-24 16:17:12.184] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:17:12.184] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:17:12.216] ubi1:animations is mounted. [2025-09-24 16:17:12.216] ubi2:textures is mounted. [2025-09-24 16:17:12.216] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:17:12.216] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:17:12.216] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:17:12.243] data.LB_FadeInType0=100 [2025-09-24 16:17:12.243] data.CHLH_FadeInType0=0 [2025-09-24 16:17:12.243] data.WU_FadeInDelay=0 [2025-09-24 16:17:12.243] max_time_out=0 [2025-09-24 16:17:12.243] No splash screen [2025-09-24 16:17:12.243] stop dss Done [2025-09-24 16:17:12.259] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:17:12.259] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:17:12.316] /dev/mem opened. [2025-09-24 16:17:12.316] Memory mapped at address 0xffffb8e19000. [2025-09-24 16:17:12.316] Read at address 0x00600018 (0xffffb8e19018): 0x00000000 [2025-09-24 16:17:12.316] Write at address 0x00600018 (0xffffb8e19018): 0x00400040, readback 0x00400040 [2025-09-24 16:17:12.509] Loaded PowerVR consumer services. [2025-09-24 16:17:12.540] 512+0 records in [2025-09-24 16:17:12.540] 512+0 records out [2025-09-24 16:17:12.589] Waiting data available... [2025-09-24 16:17:12.589] Starting syslogd/klogd: done [2025-09-24 16:17:12.604] DML Start [2025-09-24 16:17:12.795] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:17:13.020] DML res1: 0 [2025-09-24 16:17:13.462] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:17:13.462] Read Success [2025-09-24 16:17:13.462] Verifying certificate... [2025-09-24 16:17:13.733] Verified OK [2025-09-24 16:17:13.749] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:17:15.450] Verified OK [2025-09-24 16:17:15.450] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:17:16.032] Verified OK [2025-09-24 16:17:16.032] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:17:18.653] fs.protected_hardlinks = 1 [2025-09-24 16:17:18.670] fs.protected_symlinks = 1 [2025-09-24 16:17:18.685] kernel.modules_disabled = 1 [2025-09-24 16:17:18.877] [2025-09-24 16:17:18.877] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:17:20.064] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:17:27.803] SBL1:1210.0.1.0 [2025-09-24 16:17:27.851] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:17:29.419] SBL2:1210.0.1.0 [2025-09-24 16:17:29.451] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:17:29.563] j-A [2025-09-24 16:17:36.936] The R5 Autosar Classic is running [2025-09-24 16:17:36.936] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:17:36.936] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:17:37.544] INIT: version 2.96 booting [2025-09-24 16:17:37.640] INIT: Entering runlevel: 5 [2025-09-24 16:17:37.799] mtd32 attached [2025-09-24 16:17:37.815] mtd28 attached [2025-09-24 16:17:37.831] mtd24 attached [2025-09-24 16:17:37.864] ubi0:dml_code is mounted. [2025-09-24 16:17:37.932] RTNETLINK answers: File exists [2025-09-24 16:17:37.932] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:17:37.932] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:17:37.932] ubi1:animations is mounted. [2025-09-24 16:17:37.932] ubi2:textures is mounted. [2025-09-24 16:17:37.932] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:17:37.932] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:17:37.932] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:17:37.932] data.LB_FadeInType0=100 [2025-09-24 16:17:37.932] data.CHLH_FadeInType0=0 [2025-09-24 16:17:37.932] data.WU_FadeInDelay=0 [2025-09-24 16:17:37.932] max_time_out=0 [2025-09-24 16:17:37.932] No splash screen [2025-09-24 16:17:37.932] stop dss Done [2025-09-24 16:17:38.003] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:17:38.003] /dev/mem opened. [2025-09-24 16:17:38.003] Memory mapped at address 0xffff93967000. [2025-09-24 16:17:38.003] Read at address 0x00600018 (0xffff93967018): 0x00000000 [2025-09-24 16:17:38.003] Write at address 0x00600018 (0xffff93967018): 0x00400040, readback 0x00400040 [2025-09-24 16:17:38.003] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:17:38.227] Loaded PowerVR consumer services. [2025-09-24 16:17:38.242] Waiting data available... [2025-09-24 16:17:38.258] 512+0 records in [2025-09-24 16:17:38.258] 512+0 records out [2025-09-24 16:17:38.290] Starting syslogd/klogd: done [2025-09-24 16:17:38.306] DML Start [2025-09-24 16:17:38.482] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:17:38.706] DML res1: 0 [2025-09-24 16:17:39.170] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:17:39.186] Read Success [2025-09-24 16:17:39.186] Verifying certificate... [2025-09-24 16:17:39.458] Verified OK [2025-09-24 16:17:39.474] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:17:41.088] Verified OK [2025-09-24 16:17:41.088] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:17:41.712] Verified OK [2025-09-24 16:17:41.712] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:17:44.335] fs.protected_hardlinks = 1 [2025-09-24 16:17:44.335] fs.protected_symlinks = 1 [2025-09-24 16:17:44.350] kernel.modules_disabled = 1 [2025-09-24 16:17:44.542] [2025-09-24 16:17:44.542] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:17:45.748] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:17:53.520] SBL1:1210.0.1.0 [2025-09-24 16:17:53.551] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:17:55.134] SBL2:1210.0.1.0 [2025-09-24 16:17:55.166] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:17:55.278] j-A [2025-09-24 16:18:02.650] The R5 Autosar Classic is running [2025-09-24 16:18:02.650] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:18:02.650] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:18:03.257] INIT: version 2.96 booting [2025-09-24 16:18:03.369] INIT: Entering runlevel: 5 [2025-09-24 16:18:03.528] mtd32 attached [2025-09-24 16:18:03.544] mtd28 attached [2025-09-24 16:18:03.544] mtd24 attached [2025-09-24 16:18:03.593] RTNETLINK answers: File exists [2025-09-24 16:18:03.662] ubi0:dml_code is mounted. [2025-09-24 16:18:03.662] ubi1:animations is mounted. [2025-09-24 16:18:03.662] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:18:03.662] ubi2:textures is mounted. [2025-09-24 16:18:03.662] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:18:03.662] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:18:03.662] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:18:03.662] data.LB_FadeInType0=100 [2025-09-24 16:18:03.662] data.CHLH_FadeInType0=0 [2025-09-24 16:18:03.662] data.WU_FadeInDelay=0 [2025-09-24 16:18:03.662] max_time_out=0 [2025-09-24 16:18:03.662] No splash screen [2025-09-24 16:18:03.662] stop dss Done [2025-09-24 16:18:03.662] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:18:03.738] /dev/mem opened. [2025-09-24 16:18:03.738] Memory mapped at address 0xffffa4d5a000. [2025-09-24 16:18:03.738] Read at address 0x00600018 (0xffffa4d5a018): 0x00000000 [2025-09-24 16:18:03.738] Write at address 0x00600018 (0xffffa4d5a018): 0x00400040, readback 0x00400040 [2025-09-24 16:18:03.738] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:18:03.738] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:18:03.865] Loaded PowerVR consumer services. [2025-09-24 16:18:04.003] Waiting data available... [2025-09-24 16:18:04.003] 512+0 records in [2025-09-24 16:18:04.003] 512+0 records out [2025-09-24 16:18:04.035] Starting syslogd/klogd: done [2025-09-24 16:18:04.067] DML Start [2025-09-24 16:18:04.243] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:18:04.498] DML res1: 0 [2025-09-24 16:18:04.875] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:18:04.875] Read Success [2025-09-24 16:18:04.875] Verifying certificate... [2025-09-24 16:18:05.099] Verified OK [2025-09-24 16:18:05.115] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:18:06.731] Verified OK [2025-09-24 16:18:06.731] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:18:07.268] Verified OK [2025-09-24 16:18:07.268] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:18:10.098] fs.protected_hardlinks = 1 [2025-09-24 16:18:10.098] fs.protected_symlinks = 1 [2025-09-24 16:18:10.114] kernel.modules_disabled = 1 [2025-09-24 16:18:10.290] [2025-09-24 16:18:10.290] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:18:11.567] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:18:19.217] SBL1:1210.0.1.0 [2025-09-24 16:18:19.265] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:18:20.831] SBL2:1210.0.1.0 [2025-09-24 16:18:20.879] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:18:20.975] j-A [2025-09-24 16:18:28.328] The R5 Autosar Classic is running [2025-09-24 16:18:28.350] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:18:28.350] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:18:28.958] INIT: version 2.96 booting [2025-09-24 16:18:29.070] INIT: Entering runlevel: 5 [2025-09-24 16:18:29.230] mtd24 attached [2025-09-24 16:18:29.246] mtd28 attached [2025-09-24 16:18:29.246] mtd32 attached [2025-09-24 16:18:29.294] RTNETLINK answers: File exists [2025-09-24 16:18:29.358] ubi1:animations is mounted. [2025-09-24 16:18:29.358] ubi2:dml_code is mounted. [2025-09-24 16:18:29.358] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:18:29.358] ubi0:textures is mounted. [2025-09-24 16:18:29.358] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:18:29.358] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:18:29.358] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:18:29.358] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:18:29.358] data.LB_FadeInType0=100 [2025-09-24 16:18:29.358] data.CHLH_FadeInType0=0 [2025-09-24 16:18:29.358] data.WU_FadeInDelay=0 [2025-09-24 16:18:29.358] max_time_out=0 [2025-09-24 16:18:29.358] No splash screen [2025-09-24 16:18:29.358] stop dss Done [2025-09-24 16:18:29.439] /dev/mem opened. [2025-09-24 16:18:29.439] Memory mapped at address 0xffffbe576000. [2025-09-24 16:18:29.439] Read at address 0x00600018 (0xffffbe576018): 0x00000000 [2025-09-24 16:18:29.439] Write at address 0x00600018 (0xffffbe576018): 0x00400040, readback 0x00400040 [2025-09-24 16:18:29.439] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:18:29.455] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:18:29.679] Loaded PowerVR consumer services. [2025-09-24 16:18:29.711] 512+0 records in [2025-09-24 16:18:29.711] 512+0 records out [2025-09-24 16:18:29.727] Starting syslogd/klogd: Waiting data available... [2025-09-24 16:18:29.743] done [2025-09-24 16:18:29.759] DML Start [2025-09-24 16:18:29.967] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:18:30.207] DML res1: 0 [2025-09-24 16:18:30.542] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:18:30.563] Read Success [2025-09-24 16:18:30.563] Verifying certificate... [2025-09-24 16:18:30.867] Verified OK [2025-09-24 16:18:30.883] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:18:32.617] Verified OK [2025-09-24 16:18:32.617] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:18:33.299] Verified OK [2025-09-24 16:18:33.299] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:18:35.889] fs.protected_hardlinks = 1 [2025-09-24 16:18:35.905] fs.protected_symlinks = 1 [2025-09-24 16:18:35.905] kernel.modules_disabled = 1 [2025-09-24 16:18:36.097] [2025-09-24 16:18:36.097] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:18:37.233] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:18:44.913] SBL1:1210.0.1.0 [2025-09-24 16:18:44.961] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:18:46.529] SBL2:1210.0.1.0 [2025-09-24 16:18:46.577] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:18:46.672] j-A [2025-09-24 16:18:54.026] The R5 Autosar Classic is running [2025-09-24 16:18:54.048] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:18:54.048] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:18:54.655] INIT: version 2.96 booting [2025-09-24 16:18:54.767] INIT: Entering runlevel: 5 [2025-09-24 16:18:54.927] mtd28 attached [2025-09-24 16:18:54.927] mtd32 attached [2025-09-24 16:18:54.943] mtd24 attached [2025-09-24 16:18:54.991] ubi0:animations is mounted. [2025-09-24 16:18:54.991] RTNETLINK answers: File exists [2025-09-24 16:18:55.052] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:18:55.052] ubi1:dml_code is mounted. [2025-09-24 16:18:55.052] ubi2:textures is mounted. [2025-09-24 16:18:55.052] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:18:55.052] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:18:55.052] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:18:55.052] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:18:55.052] data.LB_FadeInType0=100 [2025-09-24 16:18:55.052] data.CHLH_FadeInType0=0 [2025-09-24 16:18:55.052] data.WU_FadeInDelay=0 [2025-09-24 16:18:55.052] max_time_out=0 [2025-09-24 16:18:55.052] No splash screen [2025-09-24 16:18:55.052] stop dss Done [2025-09-24 16:18:55.099] /dev/mem opened. [2025-09-24 16:18:55.150] Memory mapped at address 0xffff92de9000. [2025-09-24 16:18:55.150] Read at address 0x00600018 (0xffff92de9018): 0x00000000 [2025-09-24 16:18:55.150] Write at address 0x00600018 (0xffff92de9018): 0x00400040, readback 0x00400040 [2025-09-24 16:18:55.150] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:18:55.150] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:18:55.326] Loaded PowerVR consumer services. [2025-09-24 16:18:55.390] 512+0 records in [2025-09-24 16:18:55.390] 512+0 records out [2025-09-24 16:18:55.422] Waiting data available... [2025-09-24 16:18:55.438] Starting syslogd/klogd: done [2025-09-24 16:18:55.453] DML Start [2025-09-24 16:18:55.629] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:18:55.853] DML res1: 0 [2025-09-24 16:18:56.349] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:18:56.370] Read Success [2025-09-24 16:18:56.370] Verifying certificate... [2025-09-24 16:18:56.658] Verified OK [2025-09-24 16:18:56.674] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:18:58.234] Verified OK [2025-09-24 16:18:58.234] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:18:58.842] Verified OK [2025-09-24 16:18:58.842] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:19:01.448] fs.protected_hardlinks = 1 [2025-09-24 16:19:01.479] fs.protected_symlinks = 1 [2025-09-24 16:19:01.479] kernel.modules_disabled = 1 [2025-09-24 16:19:01.670] [2025-09-24 16:19:01.670] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:19:02.968] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:19:10.615] SBL1:1210.0.1.0 [2025-09-24 16:19:10.663] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:19:12.229] SBL2:1210.0.1.0 [2025-09-24 16:19:12.278] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:19:12.374] j-A [2025-09-24 16:19:19.727] The R5 Autosar Classic is running [2025-09-24 16:19:19.751] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:19:19.751] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:19:20.358] INIT: version 2.96 booting [2025-09-24 16:19:20.471] INIT: Entering runlevel: 5 [2025-09-24 16:19:20.630] mtd24 attached [2025-09-24 16:19:20.630] mtd28 attached [2025-09-24 16:19:20.646] mtd32 attached [2025-09-24 16:19:20.678] ubi0:textures is mounted. [2025-09-24 16:19:20.694] ubi1:animations is mounted. [2025-09-24 16:19:20.710] ubi2:dml_code is mounted. [2025-09-24 16:19:20.710] RTNETLINK answers: File exists [2025-09-24 16:19:20.763] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:19:20.763] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:19:20.763] data.LB_FadeInType0=100 [2025-09-24 16:19:20.763] data.CHLH_FadeInType0=0 [2025-09-24 16:19:20.763] data.WU_FadeInDelay=0 [2025-09-24 16:19:20.763] max_time_out=0 [2025-09-24 16:19:20.763] No splash screen [2025-09-24 16:19:20.763] stop dss Done [2025-09-24 16:19:20.763] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:19:20.763] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:19:20.763] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:19:20.819] /dev/mem opened. [2025-09-24 16:19:20.819] Memory mapped at address 0xffff81007000. [2025-09-24 16:19:20.819] Read at address 0x00600018 (0xffff81007018): 0x00000000 [2025-09-24 16:19:20.819] Write at address 0x00600018 (0xffff81007018): 0x00400040, readback 0x00400040 [2025-09-24 16:19:20.883] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:19:20.883] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:19:20.979] Loaded PowerVR consumer services. [2025-09-24 16:19:21.098] Waiting data available... [2025-09-24 16:19:21.098] 512+0 records in [2025-09-24 16:19:21.098] 512+0 records out [2025-09-24 16:19:21.114] Starting syslogd/klogd: done [2025-09-24 16:19:21.130] DML Start [2025-09-24 16:19:21.323] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:19:21.611] DML res1: 0 [2025-09-24 16:19:21.969] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:19:21.969] Read Success [2025-09-24 16:19:21.969] Verifying certificate... [2025-09-24 16:19:22.209] Verified OK [2025-09-24 16:19:22.225] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:19:23.846] Verified OK [2025-09-24 16:19:23.846] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:19:24.513] Verified OK [2025-09-24 16:19:24.513] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:19:27.200] fs.protected_hardlinks = 1 [2025-09-24 16:19:27.215] fs.protected_symlinks = 1 [2025-09-24 16:19:27.231] kernel.modules_disabled = 1 [2025-09-24 16:19:27.423] [2025-09-24 16:19:27.439] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:19:28.687] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:19:36.338] SBL1:1210.0.1.0 [2025-09-24 16:19:36.385] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:19:37.952] SBL2:1210.0.1.0 [2025-09-24 16:19:37.984] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:19:38.096] j-A [2025-09-24 16:19:45.450] The R5 Autosar Classic is running [2025-09-24 16:19:45.471] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:19:45.471] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:19:46.078] INIT: version 2.96 booting [2025-09-24 16:19:46.190] INIT: Entering runlevel: 5 [2025-09-24 16:19:46.350] mtd24 attached [2025-09-24 16:19:46.366] mtd28 attached [2025-09-24 16:19:46.382] mtd32 attached [2025-09-24 16:19:46.414] ubi0:textures is mounted. [2025-09-24 16:19:46.453] ubi1:animations is mounted. [2025-09-24 16:19:46.453] RTNETLINK answers: File exists [2025-09-24 16:19:46.453] ubi2:dml_code is mounted. [2025-09-24 16:19:46.453] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:19:46.453] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:19:46.453] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:19:46.485] data.LB_FadeInType0=100 [2025-09-24 16:19:46.485] data.CHLH_FadeInType0=0 [2025-09-24 16:19:46.485] data.WU_FadeInDelay=0 [2025-09-24 16:19:46.485] max_time_out=0 [2025-09-24 16:19:46.485] No splash screen [2025-09-24 16:19:46.485] stop dss Done [2025-09-24 16:19:46.485] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:19:46.485] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:19:46.552] /dev/mem opened. [2025-09-24 16:19:46.552] Memory mapped at address 0xffffbb77c000. [2025-09-24 16:19:46.552] Read at address 0x00600018 (0xffffbb77c018): 0x00000000 [2025-09-24 16:19:46.552] Write at address 0x00600018 (0xffffbb77c018): 0x00400040, readback 0x00400040 [2025-09-24 16:19:46.583] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:19:46.583] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:19:46.728] Loaded PowerVR consumer services. [2025-09-24 16:19:46.808] 512+0 records in [2025-09-24 16:19:46.808] 512+0 records out [2025-09-24 16:19:46.824] Waiting data available... [2025-09-24 16:19:46.855] Starting syslogd/klogd: done [2025-09-24 16:19:46.887] DML Start [2025-09-24 16:19:47.064] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:19:47.272] DML res1: 0 [2025-09-24 16:19:47.702] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:19:47.723] Read Success [2025-09-24 16:19:47.723] Verifying certificate... [2025-09-24 16:19:47.980] Verified OK [2025-09-24 16:19:47.996] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:19:49.658] Verified OK [2025-09-24 16:19:49.658] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:19:50.362] Verified OK [2025-09-24 16:19:50.362] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:19:53.048] fs.protected_hardlinks = 1 [2025-09-24 16:19:53.048] fs.protected_symlinks = 1 [2025-09-24 16:19:53.064] kernel.modules_disabled = 1 [2025-09-24 16:19:53.271] [2025-09-24 16:19:53.271] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:19:54.305] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:20:02.034] SBL1:1210.0.1.0 [2025-09-24 16:20:02.082] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:20:03.648] SBL2:1210.0.1.0 [2025-09-24 16:20:03.696] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:20:03.792] j-A [2025-09-24 16:20:11.146] The R5 Autosar Classic is running [2025-09-24 16:20:11.171] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:20:11.171] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:20:11.778] INIT: version 2.96 booting [2025-09-24 16:20:11.890] INIT: Entering runlevel: 5 [2025-09-24 16:20:12.050] mtd24 attached [2025-09-24 16:20:12.066] mtd28 attached [2025-09-24 16:20:12.082] mtd32 attached [2025-09-24 16:20:12.098] ubi0:textures is mounted. [2025-09-24 16:20:12.114] ubi1:animations is mounted. [2025-09-24 16:20:12.176] RTNETLINK answers: File exists [2025-09-24 16:20:12.176] ubi2:dml_code is mounted. [2025-09-24 16:20:12.176] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:20:12.176] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:20:12.176] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:20:12.176] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:20:12.176] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:20:12.176] data.LB_FadeInType0=100 [2025-09-24 16:20:12.176] data.CHLH_FadeInType0=0 [2025-09-24 16:20:12.176] data.WU_FadeInDelay=0 [2025-09-24 16:20:12.176] max_time_out=0 [2025-09-24 16:20:12.176] No splash screen [2025-09-24 16:20:12.176] stop dss Done [2025-09-24 16:20:12.223] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:20:12.239] /dev/mem opened. [2025-09-24 16:20:12.239] Memory mapped at address 0xffff84a00000. [2025-09-24 16:20:12.271] Read at address 0x00600018 (0xffff84a00018): 0x00000000 [2025-09-24 16:20:12.271] Write at address 0x00600018 (0xffff84a00018): 0x00400040, readback 0x00400040 [2025-09-24 16:20:12.271] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:20:12.448] Loaded PowerVR consumer services. [2025-09-24 16:20:12.496] 512+0 records in [2025-09-24 16:20:12.496] 512+0 records out [2025-09-24 16:20:12.511] Waiting data available... [2025-09-24 16:20:12.543] Starting syslogd/klogd: done [2025-09-24 16:20:12.559] DML Start [2025-09-24 16:20:12.752] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:20:12.975] DML res1: 0 [2025-09-24 16:20:13.416] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:20:13.416] Read Success [2025-09-24 16:20:13.416] Verifying certificate... [2025-09-24 16:20:13.671] Verified OK [2025-09-24 16:20:13.687] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:20:15.367] Verified OK [2025-09-24 16:20:15.382] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:20:15.974] Verified OK [2025-09-24 16:20:15.974] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:20:18.532] fs.protected_hardlinks = 1 [2025-09-24 16:20:18.532] fs.protected_symlinks = 1 [2025-09-24 16:20:18.548] kernel.modules_disabled = 1 [2025-09-24 16:20:18.756] [2025-09-24 16:20:18.756] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:20:20.060] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:20:27.751] SBL1:1210.0.1.0 [2025-09-24 16:20:27.799] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:20:29.365] SBL2:1210.0.1.0 [2025-09-24 16:20:29.397] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:20:29.510] j-A [2025-09-24 16:20:36.864] The R5 Autosar Classic is running [2025-09-24 16:20:36.864] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:20:36.885] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:20:37.492] INIT: version 2.96 booting [2025-09-24 16:20:37.604] INIT: Entering runlevel: 5 [2025-09-24 16:20:37.764] mtd24 attached [2025-09-24 16:20:37.764] mtd28 attached [2025-09-24 16:20:37.779] mtd32 attached [2025-09-24 16:20:37.811] ubi0:textures is mounted. [2025-09-24 16:20:37.891] RTNETLINK answers: File exists [2025-09-24 16:20:37.891] ubi1:animations is mounted. [2025-09-24 16:20:37.891] ubi2:dml_code is mounted. [2025-09-24 16:20:37.891] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:20:37.891] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:20:37.891] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:20:37.891] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:20:37.891] data.LB_FadeInType0=100 [2025-09-24 16:20:37.891] data.CHLH_FadeInType0=0 [2025-09-24 16:20:37.891] data.WU_FadeInDelay=0 [2025-09-24 16:20:37.891] max_time_out=0 [2025-09-24 16:20:37.891] No splash screen [2025-09-24 16:20:37.891] stop dss Done [2025-09-24 16:20:37.891] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:20:37.963] /dev/mem opened. [2025-09-24 16:20:37.963] Memory mapped at address 0xffffb776e000. [2025-09-24 16:20:37.963] Read at address 0x00600018 (0xffffb776e018): 0x00000000 [2025-09-24 16:20:37.963] Write at address 0x00600018 (0xffffb776e018): 0x00400040, readback 0x00400040 [2025-09-24 16:20:37.963] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:20:37.978] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:20:38.074] Loaded PowerVR consumer services. [2025-09-24 16:20:38.202] 512+0 records in [2025-09-24 16:20:38.202] 512+0 records out [2025-09-24 16:20:38.219] Waiting data available... [2025-09-24 16:20:38.250] Starting syslogd/klogd: done [2025-09-24 16:20:38.282] DML Start [2025-09-24 16:20:38.458] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:20:38.666] DML res1: 0 [2025-09-24 16:20:39.161] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:20:39.161] Read Success [2025-09-24 16:20:39.161] Verifying certificate... [2025-09-24 16:20:39.432] Verified OK [2025-09-24 16:20:39.448] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:20:41.207] Verified OK [2025-09-24 16:20:41.207] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:20:41.726] Verified OK [2025-09-24 16:20:41.726] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:20:44.188] fs.protected_hardlinks = 1 [2025-09-24 16:20:44.204] fs.protected_symlinks = 1 [2025-09-24 16:20:44.204] kernel.modules_disabled = 1 [2025-09-24 16:20:44.412] [2025-09-24 16:20:44.412] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:20:45.739] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:20:53.481] SBL1:1210.0.1.0 [2025-09-24 16:20:53.529] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:20:55.096] SBL2:1210.0.1.0 [2025-09-24 16:20:55.127] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:20:55.240] j-A [2025-09-24 16:21:02.594] The R5 Autosar Classic is running [2025-09-24 16:21:02.615] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:21:02.615] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:21:03.223] INIT: version 2.96 booting [2025-09-24 16:21:03.334] INIT: Entering runlevel: 5 [2025-09-24 16:21:03.495] mtd24 attached [2025-09-24 16:21:03.511] mtd32 attached [2025-09-24 16:21:03.511] mtd28 attached [2025-09-24 16:21:03.558] ubi0:textures is mounted. [2025-09-24 16:21:03.558] RTNETLINK answers: File exists [2025-09-24 16:21:03.620] ubi1:dml_code is mounted. [2025-09-24 16:21:03.620] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:21:03.620] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:21:03.620] ubi2:animations is mounted. [2025-09-24 16:21:03.620] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:21:03.620] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:21:03.620] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:21:03.620] data.LB_FadeInType0=100 [2025-09-24 16:21:03.620] data.CHLH_FadeInType0=0 [2025-09-24 16:21:03.620] data.WU_FadeInDelay=0 [2025-09-24 16:21:03.620] max_time_out=0 [2025-09-24 16:21:03.620] No splash screen [2025-09-24 16:21:03.620] stop dss Done [2025-09-24 16:21:03.685] /dev/mem opened. [2025-09-24 16:21:03.685] Memory mapped at address 0xffff99d5b000. [2025-09-24 16:21:03.685] Read at address 0x00600018 (0xffff99d5b018): 0x00000000 [2025-09-24 16:21:03.685] Write at address 0x00600018 (0xffff99d5b018): 0x00400040, readback 0x00400040 [2025-09-24 16:21:03.685] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:21:03.701] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:21:03.908] Loaded PowerVR consumer services. [2025-09-24 16:21:03.979] 512+0 records in [2025-09-24 16:21:03.979] 512+0 records out [2025-09-24 16:21:03.979] Waiting data available... [2025-09-24 16:21:04.011] Starting syslogd/klogd: done [2025-09-24 16:21:04.027] DML Start [2025-09-24 16:21:04.186] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:21:04.395] DML res1: 0 [2025-09-24 16:21:04.901] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:21:04.901] Read Success [2025-09-24 16:21:04.901] Verifying certificate... [2025-09-24 16:21:05.125] Verified OK [2025-09-24 16:21:05.141] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:21:06.943] Verified OK [2025-09-24 16:21:06.943] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:21:07.499] Verified OK [2025-09-24 16:21:07.499] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:21:09.928] fs.protected_hardlinks = 1 [2025-09-24 16:21:09.944] fs.protected_symlinks = 1 [2025-09-24 16:21:09.944] kernel.modules_disabled = 1 [2025-09-24 16:21:10.136] [2025-09-24 16:21:10.136] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:21:11.459] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:21:19.172] SBL1:1210.0.1.0 [2025-09-24 16:21:19.220] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:21:20.787] SBL2:1210.0.1.0 [2025-09-24 16:21:20.819] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:21:20.931] j-A [2025-09-24 16:21:28.286] The R5 Autosar Classic is running [2025-09-24 16:21:28.286] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:21:28.307] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:21:28.914] INIT: version 2.96 booting [2025-09-24 16:21:29.025] INIT: Entering runlevel: 5 [2025-09-24 16:21:29.185] mtd32 attached [2025-09-24 16:21:29.185] mtd24 attached [2025-09-24 16:21:29.202] mtd28 attached [2025-09-24 16:21:29.249] ubi0:dml_code is mounted. [2025-09-24 16:21:29.249] RTNETLINK answers: File exists [2025-09-24 16:21:29.318] ubi2:animations is mounted. [2025-09-24 16:21:29.318] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:21:29.318] ubi1:textures is mounted. [2025-09-24 16:21:29.318] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:21:29.318] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:21:29.318] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:21:29.318] data.LB_FadeInType0=100 [2025-09-24 16:21:29.318] data.CHLH_FadeInType0=0 [2025-09-24 16:21:29.318] data.WU_FadeInDelay=0 [2025-09-24 16:21:29.318] max_time_out=0 [2025-09-24 16:21:29.318] No splash screen [2025-09-24 16:21:29.318] stop dss Done [2025-09-24 16:21:29.318] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:21:29.408] /dev/mem opened. [2025-09-24 16:21:29.408] Memory mapped at address 0xffffab855000. [2025-09-24 16:21:29.408] Read at address 0x00600018 (0xffffab855018): 0x00000000 [2025-09-24 16:21:29.408] Write at address 0x00600018 (0xffffab855018): 0x00400040, readback 0x00400040 [2025-09-24 16:21:29.408] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:21:29.408] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:21:29.600] Loaded PowerVR consumer services. [2025-09-24 16:21:29.632] 512+0 records in [2025-09-24 16:21:29.632] 512+0 records out [2025-09-24 16:21:29.648] Waiting data available... [2025-09-24 16:21:29.680] Starting syslogd/klogd: done [2025-09-24 16:21:29.696] DML Start [2025-09-24 16:21:29.855] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:21:30.095] DML res1: 0 [2025-09-24 16:21:30.506] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:21:30.506] Read Success [2025-09-24 16:21:30.506] Verifying certificate... [2025-09-24 16:21:30.746] Verified OK [2025-09-24 16:21:30.762] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:21:32.245] Verified OK [2025-09-24 16:21:32.245] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:21:32.948] Verified OK [2025-09-24 16:21:32.948] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:21:35.617] fs.protected_hardlinks = 1 [2025-09-24 16:21:35.633] fs.protected_symlinks = 1 [2025-09-24 16:21:35.633] kernel.modules_disabled = 1 [2025-09-24 16:21:35.825] [2025-09-24 16:21:35.825] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:21:37.196] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:21:44.889] SBL1:1210.0.1.0 [2025-09-24 16:21:44.921] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:21:46.503] SBL2:1210.0.1.0 [2025-09-24 16:21:46.535] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:21:46.647] j-A [2025-09-24 16:21:54.020] The R5 Autosar Classic is running [2025-09-24 16:21:54.020] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:21:54.020] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:21:54.628] INIT: version 2.96 booting [2025-09-24 16:21:54.740] INIT: Entering runlevel: 5 [2025-09-24 16:21:54.899] mtd28 attached [2025-09-24 16:21:54.899] mtd32 attached [2025-09-24 16:21:54.915] mtd24 attached [2025-09-24 16:21:54.963] RTNETLINK answers: File exists [2025-09-24 16:21:55.006] ubi0:animations is mounted. [2025-09-24 16:21:55.006] ubi1:dml_code is mounted. [2025-09-24 16:21:55.006] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:21:55.006] ubi2:textures is mounted. [2025-09-24 16:21:55.006] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:21:55.006] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:21:55.006] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:21:55.006] data.LB_FadeInType0=100 [2025-09-24 16:21:55.032] data.CHLH_FadeInType0=0 [2025-09-24 16:21:55.032] data.WU_FadeInDelay=0 [2025-09-24 16:21:55.032] max_time_out=0 [2025-09-24 16:21:55.032] No splash screen [2025-09-24 16:21:55.032] stop dss Done [2025-09-24 16:21:55.032] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:21:55.098] /dev/mem opened. [2025-09-24 16:21:55.098] Memory mapped at address 0xffffa6b5d000. [2025-09-24 16:21:55.098] Read at address 0x00600018 (0xffffa6b5d018): 0x00000000 [2025-09-24 16:21:55.098] Write at address 0x00600018 (0xffffa6b5d018): 0x00400040, readback 0x00400040 [2025-09-24 16:21:55.146] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:21:55.162] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:21:55.291] Loaded PowerVR consumer services. [2025-09-24 16:21:55.370] Waiting data available... [2025-09-24 16:21:55.386] 512+0 records in [2025-09-24 16:21:55.386] 512+0 records out [2025-09-24 16:21:55.402] Starting syslogd/klogd: done [2025-09-24 16:21:55.434] DML Start [2025-09-24 16:21:55.626] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:21:55.850] DML res1: 0 [2025-09-24 16:21:56.225] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:21:56.225] Read Success [2025-09-24 16:21:56.225] Verifying certificate... [2025-09-24 16:21:56.464] Verified OK [2025-09-24 16:21:56.496] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:21:58.089] Verified OK [2025-09-24 16:21:58.089] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:21:58.677] Verified OK [2025-09-24 16:21:58.677] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:22:01.457] fs.protected_hardlinks = 1 [2025-09-24 16:22:01.457] fs.protected_symlinks = 1 [2025-09-24 16:22:01.457] kernel.modules_disabled = 1 [2025-09-24 16:22:01.665] [2025-09-24 16:22:01.665] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:22:02.925] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:22:10.615] SBL1:1210.0.1.0 [2025-09-24 16:22:10.647] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:22:12.230] SBL2:1210.0.1.0 [2025-09-24 16:22:12.262] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:22:12.374] j-A [2025-09-24 16:22:19.746] The R5 Autosar Classic is running [2025-09-24 16:22:19.746] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:22:19.746] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:22:20.353] INIT: version 2.96 booting [2025-09-24 16:22:20.465] INIT: Entering runlevel: 5 [2025-09-24 16:22:20.609] mtd28 attached [2025-09-24 16:22:20.625] mtd24 attached [2025-09-24 16:22:20.641] mtd32 attached [2025-09-24 16:22:20.689] ubi1:textures is mounted. [2025-09-24 16:22:20.689] RTNETLINK answers: File exists [2025-09-24 16:22:20.751] ubi2:dml_code is mounted. [2025-09-24 16:22:20.751] ubi0:animations is mounted. [2025-09-24 16:22:20.751] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:22:20.751] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:22:20.751] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:22:20.751] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:22:20.751] data.LB_FadeInType0=100 [2025-09-24 16:22:20.751] data.CHLH_FadeInType0=0 [2025-09-24 16:22:20.751] data.WU_FadeInDelay=0 [2025-09-24 16:22:20.751] max_time_out=0 [2025-09-24 16:22:20.751] No splash screen [2025-09-24 16:22:20.751] stop dss Done [2025-09-24 16:22:20.751] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:22:20.798] /dev/mem opened. [2025-09-24 16:22:20.798] Memory mapped at address 0xffff84f59000. [2025-09-24 16:22:20.825] Read at address 0x00600018 (0xffff84f59018): 0x00000000 [2025-09-24 16:22:20.825] Write at address 0x00600018 (0xffff84f59018): 0x00400040, readback 0x00400040 [2025-09-24 16:22:20.841] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:22:20.857] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:22:20.937] Loaded PowerVR consumer services. [2025-09-24 16:22:21.065] 512+0 records in [2025-09-24 16:22:21.065] 512+0 records out [2025-09-24 16:22:21.080] Waiting data available... [2025-09-24 16:22:21.113] Starting syslogd/klogd: done [2025-09-24 16:22:21.129] DML Start [2025-09-24 16:22:21.305] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:22:21.561] DML res1: 0 [2025-09-24 16:22:21.928] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:22:21.949] Read Success [2025-09-24 16:22:21.949] Verifying certificate... [2025-09-24 16:22:22.221] Verified OK [2025-09-24 16:22:22.237] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:22:23.946] Verified OK [2025-09-24 16:22:23.946] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:22:24.520] Verified OK [2025-09-24 16:22:24.520] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:22:27.046] fs.protected_hardlinks = 1 [2025-09-24 16:22:27.062] fs.protected_symlinks = 1 [2025-09-24 16:22:27.062] kernel.modules_disabled = 1 [2025-09-24 16:22:27.254] [2025-09-24 16:22:27.254] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:22:28.634] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:22:36.322] SBL1:1210.0.1.0 [2025-09-24 16:22:36.354] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:22:37.936] SBL2:1210.0.1.0 [2025-09-24 16:22:37.968] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:22:38.080] j-A [2025-09-24 16:22:45.454] The R5 Autosar Classic is running [2025-09-24 16:22:45.454] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:22:45.454] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:22:46.062] INIT: version 2.96 booting [2025-09-24 16:22:46.173] INIT: Entering runlevel: 5 [2025-09-24 16:22:46.333] mtd32 attached [2025-09-24 16:22:46.333] mtd28 attached [2025-09-24 16:22:46.349] mtd24 attached [2025-09-24 16:22:46.459] RTNETLINK answers: File exists [2025-09-24 16:22:46.459] ubi0:dml_code is mounted. [2025-09-24 16:22:46.459] ubi1:animations is mounted. [2025-09-24 16:22:46.459] ubi2:textures is mounted. [2025-09-24 16:22:46.459] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:22:46.459] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:22:46.459] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:22:46.459] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:22:46.459] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:22:46.459] data.LB_FadeInType0=100 [2025-09-24 16:22:46.459] data.CHLH_FadeInType0=0 [2025-09-24 16:22:46.459] data.WU_FadeInDelay=0 [2025-09-24 16:22:46.459] max_time_out=0 [2025-09-24 16:22:46.459] No splash screen [2025-09-24 16:22:46.459] stop dss Done [2025-09-24 16:22:46.506] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:22:46.544] /dev/mem opened. [2025-09-24 16:22:46.544] Memory mapped at address 0xffff8b649000. [2025-09-24 16:22:46.544] Read at address 0x00600018 (0xffff8b649018): 0x00000000 [2025-09-24 16:22:46.544] Write at address 0x00600018 (0xffff8b649018): 0x00400040, readback 0x00400040 [2025-09-24 16:22:46.544] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:22:46.737] Loaded PowerVR consumer services. [2025-09-24 16:22:46.784] 512+0 records in [2025-09-24 16:22:46.784] 512+0 records out [2025-09-24 16:22:46.816] Waiting data available... [2025-09-24 16:22:46.832] Starting syslogd/klogd: done [2025-09-24 16:22:46.864] DML Start [2025-09-24 16:22:47.040] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:22:47.263] DML res1: 0 [2025-09-24 16:22:47.749] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:22:47.749] Read Success [2025-09-24 16:22:47.749] Verifying certificate... [2025-09-24 16:22:47.989] Verified OK [2025-09-24 16:22:48.005] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:22:49.596] Verified OK [2025-09-24 16:22:49.596] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:22:50.249] Verified OK [2025-09-24 16:22:50.249] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:22:52.855] fs.protected_hardlinks = 1 [2025-09-24 16:22:52.855] fs.protected_symlinks = 1 [2025-09-24 16:22:52.871] kernel.modules_disabled = 1 [2025-09-24 16:22:53.047] [2025-09-24 16:22:53.047] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:22:54.304] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:23:02.025] SBL1:1210.0.1.0 [2025-09-24 16:23:02.073] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:23:03.640] SBL2:1210.0.1.0 [2025-09-24 16:23:03.688] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 16:23:03.784] j-A [2025-09-24 16:23:11.139] The R5 Autosar Classic is running [2025-09-24 16:23:11.161] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:23:11.161] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:23:11.769] INIT: version 2.96 booting [2025-09-24 16:23:11.880] INIT: Entering runlevel: 5 [2025-09-24 16:23:12.041] mtd24 attached [2025-09-24 16:23:12.041] mtd28 attached [2025-09-24 16:23:12.057] mtd32 attached [2025-09-24 16:23:12.105] RTNETLINK answers: File exists [2025-09-24 16:23:12.148] ubi0:textures is mounted. [2025-09-24 16:23:12.148] ubi1:animations is mounted. [2025-09-24 16:23:12.148] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:23:12.148] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:23:12.148] ubi2:dml_code is mounted. [2025-09-24 16:23:12.148] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:23:12.148] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:23:12.148] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:23:12.148] data.LB_FadeInType0=100 [2025-09-24 16:23:12.169] data.CHLH_FadeInType0=0 [2025-09-24 16:23:12.169] data.WU_FadeInDelay=0 [2025-09-24 16:23:12.169] max_time_out=0 [2025-09-24 16:23:12.169] No splash screen [2025-09-24 16:23:12.169] stop dss Done [2025-09-24 16:23:12.201] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:23:12.218] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:23:12.233] /dev/mem opened. [2025-09-24 16:23:12.233] Memory mapped at address 0xffff9e246000. [2025-09-24 16:23:12.259] Read at address 0x00600018 (0xffff9e246018): 0x00000000 [2025-09-24 16:23:12.259] Write at address 0x00600018 (0xffff9e246018): 0x00400040, readback 0x00400040 [2025-09-24 16:23:12.452] Loaded PowerVR consumer services. [2025-09-24 16:23:12.483] 512+0 records in [2025-09-24 16:23:12.483] 512+0 records out [2025-09-24 16:23:12.515] Starting syslogd/klogd: done [2025-09-24 16:23:12.547] Waiting data available... [2025-09-24 16:23:12.547] DML Start [2025-09-24 16:23:12.739] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:23:12.931] DML res1: 0 [2025-09-24 16:23:13.379] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:23:13.400] Read Success [2025-09-24 16:23:13.400] Verifying certificate... [2025-09-24 16:23:13.655] Verified OK [2025-09-24 16:23:13.671] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:23:15.380] Verified OK [2025-09-24 16:23:15.380] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:23:16.001] Verified OK [2025-09-24 16:23:16.001] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:23:18.639] fs.protected_hardlinks = 1 [2025-09-24 16:23:18.668] fs.protected_symlinks = 1 [2025-09-24 16:23:18.668] kernel.modules_disabled = 1 [2025-09-24 16:23:18.845] [2025-09-24 16:23:18.845] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:23:20.024] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:23:27.726] SBL1:1210.0.1.0 [2025-09-24 16:23:27.774] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:23:29.341] SBL2:1210.0.1.0 [2025-09-24 16:23:29.388] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 16:23:29.484] j-A [2025-09-24 16:23:36.839] The R5 Autosar Classic is running [2025-09-24 16:23:36.839] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:23:36.860] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:23:37.468] INIT: version 2.96 booting [2025-09-24 16:23:37.579] INIT: Entering runlevel: 5 [2025-09-24 16:23:37.740] mtd24 attached [2025-09-24 16:23:37.740] mtd28 attached [2025-09-24 16:23:37.756] mtd32 attached [2025-09-24 16:23:37.803] RTNETLINK answers: File exists [2025-09-24 16:23:37.870] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:23:37.870] ubi1:animations is mounted. [2025-09-24 16:23:37.870] ubi0:textures is mounted. [2025-09-24 16:23:37.870] ubi2:dml_code is mounted. [2025-09-24 16:23:37.870] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:23:37.870] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:23:37.870] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:23:37.870] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:23:37.870] data.LB_FadeInType0=100 [2025-09-24 16:23:37.870] data.CHLH_FadeInType0=0 [2025-09-24 16:23:37.870] data.WU_FadeInDelay=0 [2025-09-24 16:23:37.870] max_time_out=0 [2025-09-24 16:23:37.870] No splash screen [2025-09-24 16:23:37.870] stop dss Done [2025-09-24 16:23:37.886] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:23:37.886] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:23:37.918] /dev/mem opened. [2025-09-24 16:23:37.918] Memory mapped at address 0xffff8043d000. [2025-09-24 16:23:37.944] Read at address 0x00600018 (0xffff8043d018): 0x00000000 [2025-09-24 16:23:37.944] Write at address 0x00600018 (0xffff8043d018): 0x00400040, readback 0x00400040 [2025-09-24 16:23:38.041] Loaded PowerVR consumer services. [2025-09-24 16:23:38.184] 512+0 records in [2025-09-24 16:23:38.184] 512+0 records out [2025-09-24 16:23:38.201] Waiting data available... [2025-09-24 16:23:38.217] Starting syslogd/klogd: done [2025-09-24 16:23:38.232] DML Start [2025-09-24 16:23:38.408] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:23:38.696] DML res1: 0 [2025-09-24 16:23:39.044] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:23:39.044] Read Success [2025-09-24 16:23:39.044] Verifying certificate... [2025-09-24 16:23:39.300] Verified OK [2025-09-24 16:23:39.315] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:23:40.899] Verified OK [2025-09-24 16:23:40.899] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:23:41.559] Verified OK [2025-09-24 16:23:41.559] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:23:44.293] fs.protected_hardlinks = 1 [2025-09-24 16:23:44.309] fs.protected_symlinks = 1 [2025-09-24 16:23:44.309] kernel.modules_disabled = 1 [2025-09-24 16:23:44.501] [2025-09-24 16:23:44.501] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:23:45.745] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:23:53.443] SBL1:1210.0.1.0 [2025-09-24 16:23:53.491] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:23:55.073] SBL2:1210.0.1.0 [2025-09-24 16:23:55.105] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:23:55.218] j-A [2025-09-24 16:24:02.556] The R5 Autosar Classic is running [2025-09-24 16:24:02.581] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:24:02.581] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:24:03.188] INIT: version 2.96 booting [2025-09-24 16:24:03.301] INIT: Entering runlevel: 5 [2025-09-24 16:24:03.460] mtd24 attached [2025-09-24 16:24:03.476] mtd32 attached [2025-09-24 16:24:03.476] mtd28 attached [2025-09-24 16:24:03.508] ubi0:textures is mounted. [2025-09-24 16:24:03.524] RTNETLINK answers: File exists [2025-09-24 16:24:03.574] ubi1:dml_code is mounted. [2025-09-24 16:24:03.574] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:24:03.574] ubi2:animations is mounted. [2025-09-24 16:24:03.574] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:24:03.574] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:24:03.574] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:24:03.574] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:24:03.574] data.LB_FadeInType0=100 [2025-09-24 16:24:03.574] data.CHLH_FadeInType0=0 [2025-09-24 16:24:03.595] data.WU_FadeInDelay=0 [2025-09-24 16:24:03.595] max_time_out=0 [2025-09-24 16:24:03.595] No splash screen [2025-09-24 16:24:03.595] stop dss Done [2025-09-24 16:24:03.678] /dev/mem opened. [2025-09-24 16:24:03.678] Memory mapped at address 0xffff9dfc8000. [2025-09-24 16:24:03.678] Read at address 0x00600018 (0xffff9dfc8018): 0x00000000 [2025-09-24 16:24:03.678] Write at address 0x00600018 (0xffff9dfc8018): 0x00400040, readback 0x00400040 [2025-09-24 16:24:03.678] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:24:03.678] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:24:03.821] Loaded PowerVR consumer services. [2025-09-24 16:24:03.917] Waiting data available... [2025-09-24 16:24:03.933] 512+0 records in [2025-09-24 16:24:03.949] 512+0 records out [2025-09-24 16:24:03.965] Starting syslogd/klogd: done [2025-09-24 16:24:03.981] DML Start [2025-09-24 16:24:04.157] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:24:04.413] DML res1: 0 [2025-09-24 16:24:04.701] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:24:04.701] Read Success [2025-09-24 16:24:04.717] Verifying certificate... [2025-09-24 16:24:04.989] Verified OK [2025-09-24 16:24:05.005] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:24:06.647] Verified OK [2025-09-24 16:24:06.647] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:24:07.235] Verified OK [2025-09-24 16:24:07.235] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:24:10.001] fs.protected_hardlinks = 1 [2025-09-24 16:24:10.001] fs.protected_symlinks = 1 [2025-09-24 16:24:10.017] kernel.modules_disabled = 1 [2025-09-24 16:24:10.208] [2025-09-24 16:24:10.208] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:24:11.487] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:24:19.168] SBL1:1210.0.1.0 [2025-09-24 16:24:19.200] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:24:20.782] SBL2:1210.0.1.0 [2025-09-24 16:24:20.814] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:24:20.927] j-A [2025-09-24 16:24:28.299] The R5 Autosar Classic is running [2025-09-24 16:24:28.299] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:24:28.299] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:24:28.907] INIT: version 2.96 booting [2025-09-24 16:24:29.018] INIT: Entering runlevel: 5 [2025-09-24 16:24:29.163] mtd32 attached [2025-09-24 16:24:29.178] mtd28 attached [2025-09-24 16:24:29.179] mtd24 attached [2025-09-24 16:24:29.226] RTNETLINK answers: File exists [2025-09-24 16:24:29.277] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:24:29.277] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:24:29.277] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:24:29.277] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:24:29.277] ubi1:animations is mounted. [2025-09-24 16:24:29.277] ubi0:dml_code is mounted. [2025-09-24 16:24:29.277] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:24:29.277] ubi2:textures is mounted. [2025-09-24 16:24:29.293] data.LB_FadeInType0=100 [2025-09-24 16:24:29.314] data.CHLH_FadeInType0=0 [2025-09-24 16:24:29.314] data.WU_FadeInDelay=0 [2025-09-24 16:24:29.314] max_time_out=0 [2025-09-24 16:24:29.314] No splash screen [2025-09-24 16:24:29.314] stop dss Done [2025-09-24 16:24:29.330] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:24:29.346] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:24:29.385] /dev/mem opened. [2025-09-24 16:24:29.385] Memory mapped at address 0xffffbc33b000. [2025-09-24 16:24:29.385] Read at address 0x00600018 (0xffffbc33b018): 0x00000000 [2025-09-24 16:24:29.385] Write at address 0x00600018 (0xffffbc33b018): 0x00400040, readback 0x00400040 [2025-09-24 16:24:29.480] Loaded PowerVR consumer services. [2025-09-24 16:24:29.640] 512+0 records in [2025-09-24 16:24:29.640] 512+0 records out [2025-09-24 16:24:29.640] Waiting data available... [2025-09-24 16:24:29.671] Starting syslogd/klogd: done [2025-09-24 16:24:29.687] DML Start [2025-09-24 16:24:29.896] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:24:30.151] DML res1: 0 [2025-09-24 16:24:30.509] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:24:30.509] Read Success [2025-09-24 16:24:30.509] Verifying certificate... [2025-09-24 16:24:30.749] Verified OK [2025-09-24 16:24:30.765] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:24:32.396] Verified OK [2025-09-24 16:24:32.396] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:24:33.095] Verified OK [2025-09-24 16:24:33.095] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:24:35.813] fs.protected_hardlinks = 1 [2025-09-24 16:24:35.829] fs.protected_symlinks = 1 [2025-09-24 16:24:35.829] kernel.modules_disabled = 1 [2025-09-24 16:24:36.021] [2025-09-24 16:24:36.021] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:24:37.198] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:24:44.878] SBL1:1210.0.1.0 [2025-09-24 16:24:44.910] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:24:46.493] SBL2:1210.0.1.0 [2025-09-24 16:24:46.524] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:24:46.636] j-A [2025-09-24 16:24:54.010] The R5 Autosar Classic is running [2025-09-24 16:24:54.010] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:24:54.010] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:24:54.617] INIT: version 2.96 booting [2025-09-24 16:24:54.730] INIT: Entering runlevel: 5 [2025-09-24 16:24:54.873] mtd32 attached [2025-09-24 16:24:54.889] mtd28 attached [2025-09-24 16:24:54.889] mtd24 attached [2025-09-24 16:24:54.953] ubi0:dml_code is mounted. [2025-09-24 16:24:54.953] RTNETLINK answers: File exists [2025-09-24 16:24:54.989] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:24:54.989] ubi1:animations is mounted. [2025-09-24 16:24:54.989] ubi2:textures is mounted. [2025-09-24 16:24:54.989] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:24:54.989] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:24:54.989] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:24:54.989] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:24:55.010] data.LB_FadeInType0=100 [2025-09-24 16:24:55.010] data.CHLH_FadeInType0=0 [2025-09-24 16:24:55.010] data.WU_FadeInDelay=0 [2025-09-24 16:24:55.010] max_time_out=0 [2025-09-24 16:24:55.010] No splash screen [2025-09-24 16:24:55.010] stop dss Done [2025-09-24 16:24:55.058] /dev/mem opened. [2025-09-24 16:24:55.058] Memory mapped at address 0xffff87941000. [2025-09-24 16:24:55.094] Read at address 0x00600018 (0xffff87941018): 0x00000000 [2025-09-24 16:24:55.094] Write at address 0x00600018 (0xffff87941018): 0x00400040, readback 0x00400040 [2025-09-24 16:24:55.094] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:24:55.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:24:55.239] Loaded PowerVR consumer services. [2025-09-24 16:24:55.364] Waiting data available... [2025-09-24 16:24:55.364] 512+0 records in [2025-09-24 16:24:55.364] 512+0 records out [2025-09-24 16:24:55.396] Starting syslogd/klogd: done [2025-09-24 16:24:55.428] DML Start [2025-09-24 16:24:55.589] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:24:55.796] DML res1: 0 [2025-09-24 16:24:56.287] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:24:56.287] Read Success [2025-09-24 16:24:56.287] Verifying certificate... [2025-09-24 16:24:56.527] Verified OK [2025-09-24 16:24:56.543] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:24:58.238] Verified OK [2025-09-24 16:24:58.259] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:24:58.786] Verified OK [2025-09-24 16:24:58.786] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:25:01.296] fs.protected_hardlinks = 1 [2025-09-24 16:25:01.312] fs.protected_symlinks = 1 [2025-09-24 16:25:01.312] kernel.modules_disabled = 1 [2025-09-24 16:25:01.521] [2025-09-24 16:25:01.521] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:25:02.877] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:25:10.586] SBL1:1210.0.1.0 [2025-09-24 16:25:10.618] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:25:12.200] SBL2:1210.0.1.0 [2025-09-24 16:25:12.232] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:25:12.345] j-A [2025-09-24 16:25:19.717] The R5 Autosar Classic is running [2025-09-24 16:25:19.717] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:25:19.717] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:25:20.325] INIT: version 2.96 booting [2025-09-24 16:25:20.436] INIT: Entering runlevel: 5 [2025-09-24 16:25:20.581] mtd24 attached [2025-09-24 16:25:20.597] mtd28 attached [2025-09-24 16:25:20.613] mtd32 attached [2025-09-24 16:25:20.660] ubi0:textures is mounted. [2025-09-24 16:25:20.660] RTNETLINK answers: File exists [2025-09-24 16:25:20.694] ubi2:dml_code is mounted. [2025-09-24 16:25:20.694] ubi1:animations is mounted. [2025-09-24 16:25:20.694] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:25:20.694] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:25:20.694] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:25:20.694] data.LB_FadeInType0=100 [2025-09-24 16:25:20.726] data.CHLH_FadeInType0=0 [2025-09-24 16:25:20.726] data.WU_FadeInDelay=0 [2025-09-24 16:25:20.726] max_time_out=0 [2025-09-24 16:25:20.726] No splash screen [2025-09-24 16:25:20.726] stop dss Done [2025-09-24 16:25:20.726] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:25:20.726] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:25:20.779] /dev/mem opened. [2025-09-24 16:25:20.779] Memory mapped at address 0xffffa4666000. [2025-09-24 16:25:20.779] Read at address 0x00600018 (0xffffa4666018): 0x00000000 [2025-09-24 16:25:20.779] Write at address 0x00600018 (0xffffa4666018): 0x00400040, readback 0x00400040 [2025-09-24 16:25:20.779] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:25:20.795] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:25:20.860] Loaded PowerVR consumer services. [2025-09-24 16:25:21.035] Waiting data available... [2025-09-24 16:25:21.051] 512+0 records in [2025-09-24 16:25:21.051] 512+0 records out [2025-09-24 16:25:21.099] Starting syslogd/klogd: done [2025-09-24 16:25:21.115] DML Start [2025-09-24 16:25:21.307] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:25:21.579] DML res1: 0 [2025-09-24 16:25:21.939] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:25:21.939] Read Success [2025-09-24 16:25:21.939] Verifying certificate... [2025-09-24 16:25:22.243] Verified OK [2025-09-24 16:25:22.259] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:25:24.033] Verified OK [2025-09-24 16:25:24.033] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:25:24.576] Verified OK [2025-09-24 16:25:24.576] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:25:27.230] fs.protected_hardlinks = 1 [2025-09-24 16:25:27.230] fs.protected_symlinks = 1 [2025-09-24 16:25:27.246] kernel.modules_disabled = 1 [2025-09-24 16:25:27.455] [2025-09-24 16:25:27.455] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:25:28.618] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:25:36.289] SBL1:1210.0.1.0 [2025-09-24 16:25:36.337] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:25:37.919] SBL2:1210.0.1.0 [2025-09-24 16:25:37.951] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 16:25:38.063] j-A [2025-09-24 16:25:45.401] The R5 Autosar Classic is running [2025-09-24 16:25:45.432] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:25:45.432] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:25:46.040] INIT: version 2.96 booting [2025-09-24 16:25:46.151] INIT: Entering runlevel: 5 [2025-09-24 16:25:46.311] mtd28 attached [2025-09-24 16:25:46.311] mtd24 attached [2025-09-24 16:25:46.327] mtd32 attached [2025-09-24 16:25:46.375] ubi0:animations is mounted. [2025-09-24 16:25:46.375] RTNETLINK answers: File exists [2025-09-24 16:25:46.419] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:25:46.419] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:25:46.419] ubi1:textures is mounted. [2025-09-24 16:25:46.419] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:25:46.419] ubi2:dml_code is mounted. [2025-09-24 16:25:46.419] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:25:46.419] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:25:46.441] data.LB_FadeInType0=100 [2025-09-24 16:25:46.441] data.CHLH_FadeInType0=0 [2025-09-24 16:25:46.441] data.WU_FadeInDelay=0 [2025-09-24 16:25:46.441] max_time_out=0 [2025-09-24 16:25:46.441] No splash screen [2025-09-24 16:25:46.441] stop dss Done [2025-09-24 16:25:46.489] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:25:46.489] /dev/mem opened. [2025-09-24 16:25:46.521] Memory mapped at address 0xffff92695000. [2025-09-24 16:25:46.521] Read at address 0x00600018 (0xffff92695018): 0x00000000 [2025-09-24 16:25:46.521] Write at address 0x00600018 (0xffff92695018): 0x00400040, readback 0x00400040 [2025-09-24 16:25:46.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:25:46.713] Loaded PowerVR consumer services. [2025-09-24 16:25:46.777] 512+0 records in [2025-09-24 16:25:46.777] 512+0 records out [2025-09-24 16:25:46.792] Waiting data available... [2025-09-24 16:25:46.824] Starting syslogd/klogd: done [2025-09-24 16:25:46.840] DML Start [2025-09-24 16:25:47.016] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:25:47.224] DML res1: 0 [2025-09-24 16:25:47.680] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:25:47.680] Read Success [2025-09-24 16:25:47.680] Verifying certificate... [2025-09-24 16:25:47.904] Verified OK [2025-09-24 16:25:47.920] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:25:49.630] Verified OK [2025-09-24 16:25:49.630] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:25:50.206] Verified OK [2025-09-24 16:25:50.206] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:25:52.812] fs.protected_hardlinks = 1 [2025-09-24 16:25:52.828] fs.protected_symlinks = 1 [2025-09-24 16:25:52.828] kernel.modules_disabled = 1 [2025-09-24 16:25:53.036] [2025-09-24 16:25:53.036] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:25:54.347] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:26:02.020] SBL1:1210.0.1.0 [2025-09-24 16:26:02.068] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:26:03.636] SBL2:1210.0.1.0 [2025-09-24 16:26:03.668] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:26:03.779] j-A [2025-09-24 16:26:11.133] The R5 Autosar Classic is running [2025-09-24 16:26:11.133] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:26:11.154] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:26:11.761] INIT: version 2.96 booting [2025-09-24 16:26:11.873] INIT: Entering runlevel: 5 [2025-09-24 16:26:12.017] mtd28 attached [2025-09-24 16:26:12.033] mtd32 attached [2025-09-24 16:26:12.048] mtd24 attached [2025-09-24 16:26:12.097] ubi0:animations is mounted. [2025-09-24 16:26:12.097] RTNETLINK answers: File exists [2025-09-24 16:26:12.132] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:26:12.132] ubi2:textures is mounted. [2025-09-24 16:26:12.132] ubi1:dml_code is mounted. [2025-09-24 16:26:12.132] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:26:12.132] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:26:12.164] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:26:12.164] data.LB_FadeInType0=100 [2025-09-24 16:26:12.164] data.CHLH_FadeInType0=0 [2025-09-24 16:26:12.164] data.WU_FadeInDelay=0 [2025-09-24 16:26:12.164] max_time_out=0 [2025-09-24 16:26:12.164] No splash screen [2025-09-24 16:26:12.164] stop dss Done [2025-09-24 16:26:12.164] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:26:12.226] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:26:12.226] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:26:12.226] /dev/mem opened. [2025-09-24 16:26:12.226] Memory mapped at address 0xffffbe788000. [2025-09-24 16:26:12.226] Read at address 0x00600018 (0xffffbe788018): 0x00000000 [2025-09-24 16:26:12.226] Write at address 0x00600018 (0xffffbe788018): 0x00400040, readback 0x00400040 [2025-09-24 16:26:12.338] Loaded PowerVR consumer services. [2025-09-24 16:26:12.481] Waiting data available... [2025-09-24 16:26:12.497] 512+0 records in [2025-09-24 16:26:12.497] 512+0 records out [2025-09-24 16:26:12.545] Starting syslogd/klogd: done [2025-09-24 16:26:12.561] DML Start [2025-09-24 16:26:12.753] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:26:12.977] DML res1: 0 [2025-09-24 16:26:13.376] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:26:13.376] Read Success [2025-09-24 16:26:13.376] Verifying certificate... [2025-09-24 16:26:13.632] Verified OK [2025-09-24 16:26:13.648] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:26:15.308] Verified OK [2025-09-24 16:26:15.309] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:26:15.973] Verified OK [2025-09-24 16:26:15.973] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:26:18.483] fs.protected_hardlinks = 1 [2025-09-24 16:26:18.499] fs.protected_symlinks = 1 [2025-09-24 16:26:18.499] kernel.modules_disabled = 1 [2025-09-24 16:26:18.690] [2025-09-24 16:26:18.690] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:26:20.042] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:26:27.727] SBL1:1210.0.1.0 [2025-09-24 16:26:27.758] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:26:29.341] SBL2:1210.0.1.0 [2025-09-24 16:26:29.373] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:26:29.485] j-A [2025-09-24 16:26:36.839] The R5 Autosar Classic is running [2025-09-24 16:26:36.839] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:26:36.860] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:26:37.467] INIT: version 2.96 booting [2025-09-24 16:26:37.578] INIT: Entering runlevel: 5 [2025-09-24 16:26:37.723] mtd24 attached [2025-09-24 16:26:37.739] mtd32 attached [2025-09-24 16:26:37.755] mtd28 attached [2025-09-24 16:26:37.787] ubi0:textures is mounted. [2025-09-24 16:26:37.864] ubi1:dml_code is mounted. [2025-09-24 16:26:37.864] RTNETLINK answers: File exists [2025-09-24 16:26:37.864] ubi2:animations is mounted. [2025-09-24 16:26:37.864] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:26:37.864] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:26:37.864] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:26:37.864] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:26:37.864] data.LB_FadeInType0=100 [2025-09-24 16:26:37.864] data.CHLH_FadeInType0=0 [2025-09-24 16:26:37.864] data.WU_FadeInDelay=0 [2025-09-24 16:26:37.864] max_time_out=0 [2025-09-24 16:26:37.864] No splash screen [2025-09-24 16:26:37.864] stop dss Done [2025-09-24 16:26:37.864] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:26:37.896] /dev/mem opened. [2025-09-24 16:26:37.896] Memory mapped at address 0xffffaa7c0000. [2025-09-24 16:26:37.923] Read at address 0x00600018 (0xffffaa7c0018): 0x00000000 [2025-09-24 16:26:37.923] Write at address 0x00600018 (0xffffaa7c0018): 0x00400040, readback 0x00400040 [2025-09-24 16:26:37.954] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:26:37.954] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:26:38.113] Loaded PowerVR consumer services. [2025-09-24 16:26:38.193] Waiting data available... [2025-09-24 16:26:38.209] 512+0 records in [2025-09-24 16:26:38.209] 512+0 records out [2025-09-24 16:26:38.257] Starting syslogd/klogd: done [2025-09-24 16:26:38.273] DML Start [2025-09-24 16:26:38.448] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:26:38.688] DML res1: 0 [2025-09-24 16:26:39.136] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:26:39.157] Read Success [2025-09-24 16:26:39.157] Verifying certificate... [2025-09-24 16:26:39.397] Verified OK [2025-09-24 16:26:39.412] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:26:41.054] Verified OK [2025-09-24 16:26:41.054] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:26:41.740] Verified OK [2025-09-24 16:26:41.740] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:26:44.363] fs.protected_hardlinks = 1 [2025-09-24 16:26:44.378] fs.protected_symlinks = 1 [2025-09-24 16:26:44.378] kernel.modules_disabled = 1 [2025-09-24 16:26:44.570] [2025-09-24 16:26:44.570] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:26:45.717] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:26:53.470] SBL1:1210.0.1.0 [2025-09-24 16:26:53.518] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:26:55.084] SBL2:1210.0.1.0 [2025-09-24 16:26:55.132] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:26:55.245] j-A [2025-09-24 16:27:02.582] The R5 Autosar Classic is running [2025-09-24 16:27:02.613] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:27:02.613] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:27:03.221] INIT: version 2.96 booting [2025-09-24 16:27:03.332] INIT: Entering runlevel: 5 [2025-09-24 16:27:03.477] mtd28 attached [2025-09-24 16:27:03.493] mtd24 attached [2025-09-24 16:27:03.509] mtd32 attached [2025-09-24 16:27:03.541] ubi0:animations is mounted. [2025-09-24 16:27:03.557] ubi1:textures is mounted. [2025-09-24 16:27:03.557] RTNETLINK answers: File exists [2025-09-24 16:27:03.613] ubi2:dml_code is mounted. [2025-09-24 16:27:03.613] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:27:03.613] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:27:03.613] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:27:03.613] data.LB_FadeInType0=100 [2025-09-24 16:27:03.613] data.CHLH_FadeInType0=0 [2025-09-24 16:27:03.613] data.WU_FadeInDelay=0 [2025-09-24 16:27:03.613] max_time_out=0 [2025-09-24 16:27:03.613] No splash screen [2025-09-24 16:27:03.613] stop dss Done [2025-09-24 16:27:03.613] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:27:03.613] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:27:03.694] /dev/mem opened. [2025-09-24 16:27:03.694] Memory mapped at address 0xffffbe532000. [2025-09-24 16:27:03.694] Read at address 0x00600018 (0xffffbe532018): 0x00000000 [2025-09-24 16:27:03.694] Write at address 0x00600018 (0xffffbe532018): 0x00400040, readback 0x00400040 [2025-09-24 16:27:03.694] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:27:03.694] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:27:03.902] Loaded PowerVR consumer services. [2025-09-24 16:27:03.934] Waiting data available... [2025-09-24 16:27:03.950] 512+0 records in [2025-09-24 16:27:03.950] 512+0 records out [2025-09-24 16:27:03.966] Starting syslogd/klogd: done [2025-09-24 16:27:03.982] DML Start [2025-09-24 16:27:04.142] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:27:04.365] DML res1: 0 [2025-09-24 16:27:04.915] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:27:04.915] Read Success [2025-09-24 16:27:04.915] Verifying certificate... [2025-09-24 16:27:05.171] Verified OK [2025-09-24 16:27:05.187] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:27:06.927] Verified OK [2025-09-24 16:27:06.927] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:27:07.446] Verified OK [2025-09-24 16:27:07.446] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:27:09.955] fs.protected_hardlinks = 1 [2025-09-24 16:27:09.955] fs.protected_symlinks = 1 [2025-09-24 16:27:09.972] kernel.modules_disabled = 1 [2025-09-24 16:27:10.163] [2025-09-24 16:27:10.163] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:27:11.510] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:27:19.197] SBL1:1210.0.1.0 [2025-09-24 16:27:19.229] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:27:20.811] SBL2:1210.0.1.0 [2025-09-24 16:27:20.843] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:27:20.956] j-A [2025-09-24 16:27:28.325] The R5 Autosar Classic is running [2025-09-24 16:27:28.325] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:27:28.325] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:27:28.932] INIT: version 2.96 booting [2025-09-24 16:27:29.044] INIT: Entering runlevel: 5 [2025-09-24 16:27:29.204] mtd24 attached [2025-09-24 16:27:29.204] mtd28 attached [2025-09-24 16:27:29.220] mtd32 attached [2025-09-24 16:27:29.251] ubi0:textures is mounted. [2025-09-24 16:27:29.267] RTNETLINK answers: File exists [2025-09-24 16:27:29.307] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:27:29.307] ubi1:animations is mounted. [2025-09-24 16:27:29.307] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:27:29.307] ubi2:dml_code is mounted. [2025-09-24 16:27:29.307] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:27:29.307] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:27:29.307] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:27:29.330] data.LB_FadeInType0=100 [2025-09-24 16:27:29.330] data.CHLH_FadeInType0=0 [2025-09-24 16:27:29.330] data.WU_FadeInDelay=0 [2025-09-24 16:27:29.330] max_time_out=0 [2025-09-24 16:27:29.330] No splash screen [2025-09-24 16:27:29.330] stop dss Done [2025-09-24 16:27:29.347] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:27:29.370] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:27:29.408] /dev/mem opened. [2025-09-24 16:27:29.408] Memory mapped at address 0xffffb150b000. [2025-09-24 16:27:29.408] Read at address 0x00600018 (0xffffb150b018): 0x00000000 [2025-09-24 16:27:29.408] Write at address 0x00600018 (0xffffb150b018): 0x00400040, readback 0x00400040 [2025-09-24 16:27:29.599] Loaded PowerVR consumer services. [2025-09-24 16:27:29.663] Waiting data available... [2025-09-24 16:27:29.679] 512+0 records in [2025-09-24 16:27:29.679] 512+0 records out [2025-09-24 16:27:29.711] Starting syslogd/klogd: done [2025-09-24 16:27:29.727] DML Start [2025-09-24 16:27:29.887] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:27:30.128] DML res1: 0 [2025-09-24 16:27:30.599] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:27:30.599] Read Success [2025-09-24 16:27:30.599] Verifying certificate... [2025-09-24 16:27:30.840] Verified OK [2025-09-24 16:27:30.856] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:27:32.644] Verified OK [2025-09-24 16:27:32.644] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:27:33.215] Verified OK [2025-09-24 16:27:33.215] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:27:35.756] fs.protected_hardlinks = 1 [2025-09-24 16:27:35.787] fs.protected_symlinks = 1 [2025-09-24 16:27:35.787] kernel.modules_disabled = 1 [2025-09-24 16:27:35.980] [2025-09-24 16:27:35.980] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:27:37.155] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:27:44.901] SBL1:1210.0.1.0 [2025-09-24 16:27:44.933] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:27:46.516] SBL2:1210.0.1.0 [2025-09-24 16:27:46.548] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:27:46.661] j-A [2025-09-24 16:27:54.034] The R5 Autosar Classic is running [2025-09-24 16:27:54.034] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:27:54.034] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:27:54.641] INIT: version 2.96 booting [2025-09-24 16:27:54.753] INIT: Entering runlevel: 5 [2025-09-24 16:27:54.913] mtd28 attached [2025-09-24 16:27:54.913] mtd24 attached [2025-09-24 16:27:54.929] mtd32 attached [2025-09-24 16:27:54.977] RTNETLINK answers: File exists [2025-09-24 16:27:54.977] ubi0:animations is mounted. [2025-09-24 16:27:55.039] ubi1:textures is mounted. [2025-09-24 16:27:55.039] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:27:55.039] ubi2:dml_code is mounted. [2025-09-24 16:27:55.039] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:27:55.039] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:27:55.039] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:27:55.039] data.LB_FadeInType0=100 [2025-09-24 16:27:55.039] data.CHLH_FadeInType0=0 [2025-09-24 16:27:55.039] data.WU_FadeInDelay=0 [2025-09-24 16:27:55.039] max_time_out=0 [2025-09-24 16:27:55.039] No splash screen [2025-09-24 16:27:55.039] stop dss Done [2025-09-24 16:27:55.039] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:27:55.071] /dev/mem opened. [2025-09-24 16:27:55.109] Memory mapped at address 0xffff8c583000. [2025-09-24 16:27:55.109] Read at address 0x00600018 (0xffff8c583018): 0x00000000 [2025-09-24 16:27:55.109] Write at address 0x00600018 (0xffff8c583018): 0x00400040, readback 0x00400040 [2025-09-24 16:27:55.109] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:27:55.109] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:27:55.269] Loaded PowerVR consumer services. [2025-09-24 16:27:55.364] Waiting data available... [2025-09-24 16:27:55.380] 512+0 records in [2025-09-24 16:27:55.380] 512+0 records out [2025-09-24 16:27:55.428] Starting syslogd/klogd: done [2025-09-24 16:27:55.444] DML Start [2025-09-24 16:27:55.604] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:27:55.828] DML res1: 0 [2025-09-24 16:27:56.308] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:27:56.328] Read Success [2025-09-24 16:27:56.328] Verifying certificate... [2025-09-24 16:27:56.568] Verified OK [2025-09-24 16:27:56.584] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:27:58.304] Verified OK [2025-09-24 16:27:58.304] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:27:58.889] Verified OK [2025-09-24 16:27:58.889] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:28:01.543] fs.protected_hardlinks = 1 [2025-09-24 16:28:01.572] fs.protected_symlinks = 1 [2025-09-24 16:28:01.572] kernel.modules_disabled = 1 [2025-09-24 16:28:01.763] [2025-09-24 16:28:01.763] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:28:02.883] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:28:10.614] SBL1:1210.0.1.0 [2025-09-24 16:28:10.646] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:28:12.229] SBL2:1210.0.1.0 [2025-09-24 16:28:12.260] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:28:12.372] j-A [2025-09-24 16:28:19.727] The R5 Autosar Classic is running [2025-09-24 16:28:19.727] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:28:19.748] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:28:20.355] INIT: version 2.96 booting [2025-09-24 16:28:20.467] INIT: Entering runlevel: 5 [2025-09-24 16:28:20.628] mtd32 attached [2025-09-24 16:28:20.628] mtd28 attached [2025-09-24 16:28:20.644] mtd24 attached [2025-09-24 16:28:20.724] RTNETLINK answers: File exists [2025-09-24 16:28:20.724] ubi0:dml_code is mounted. [2025-09-24 16:28:20.724] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:28:20.724] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:28:20.724] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:28:20.724] ubi1:animations is mounted. [2025-09-24 16:28:20.724] ubi2:textures is mounted. [2025-09-24 16:28:20.724] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:28:20.724] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:28:20.745] data.LB_FadeInType0=100 [2025-09-24 16:28:20.745] data.CHLH_FadeInType0=0 [2025-09-24 16:28:20.745] data.WU_FadeInDelay=0 [2025-09-24 16:28:20.745] max_time_out=0 [2025-09-24 16:28:20.745] No splash screen [2025-09-24 16:28:20.745] stop dss Done [2025-09-24 16:28:20.777] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:28:20.793] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:28:20.826] /dev/mem opened. [2025-09-24 16:28:20.826] Memory mapped at address 0xffff8d82a000. [2025-09-24 16:28:20.826] Read at address 0x00600018 (0xffff8d82a018): 0x00000000 [2025-09-24 16:28:20.826] Write at address 0x00600018 (0xffff8d82a018): 0x00400040, readback 0x00400040 [2025-09-24 16:28:20.954] Loaded PowerVR consumer services. [2025-09-24 16:28:21.093] Waiting data available... [2025-09-24 16:28:21.093] 512+0 records in [2025-09-24 16:28:21.093] 512+0 records out [2025-09-24 16:28:21.125] Starting syslogd/klogd: done [2025-09-24 16:28:21.141] DML Start [2025-09-24 16:28:21.300] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:28:21.508] DML res1: 0 [2025-09-24 16:28:22.036] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:28:22.060] Read Success [2025-09-24 16:28:22.060] Verifying certificate... [2025-09-24 16:28:22.300] Verified OK [2025-09-24 16:28:22.316] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:28:23.947] Verified OK [2025-09-24 16:28:23.947] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:28:24.593] Verified OK [2025-09-24 16:28:24.593] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:28:27.295] fs.protected_hardlinks = 1 [2025-09-24 16:28:27.311] fs.protected_symlinks = 1 [2025-09-24 16:28:27.311] kernel.modules_disabled = 1 [2025-09-24 16:28:27.519] [2025-09-24 16:28:27.519] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:28:28.595] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:28:36.312] SBL1:1210.0.1.0 [2025-09-24 16:28:36.360] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:28:37.926] SBL2:1210.0.1.0 [2025-09-24 16:28:37.974] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:28:38.070] j-A [2025-09-24 16:28:45.425] The R5 Autosar Classic is running [2025-09-24 16:28:45.446] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:28:45.446] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:28:46.054] INIT: version 2.96 booting [2025-09-24 16:28:46.165] INIT: Entering runlevel: 5 [2025-09-24 16:28:46.310] mtd24 attached [2025-09-24 16:28:46.326] mtd28 attached [2025-09-24 16:28:46.342] mtd32 attached [2025-09-24 16:28:46.374] ubi0:textures is mounted. [2025-09-24 16:28:46.390] ubi1:animations is mounted. [2025-09-24 16:28:46.390] RTNETLINK answers: File exists [2025-09-24 16:28:46.449] ubi2:dml_code is mounted. [2025-09-24 16:28:46.449] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:28:46.449] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:28:46.449] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:28:46.449] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:28:46.449] data.LB_FadeInType0=100 [2025-09-24 16:28:46.449] data.CHLH_FadeInType0=0 [2025-09-24 16:28:46.449] data.WU_FadeInDelay=0 [2025-09-24 16:28:46.449] max_time_out=0 [2025-09-24 16:28:46.449] No splash screen [2025-09-24 16:28:46.449] stop dss Done [2025-09-24 16:28:46.449] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:28:46.524] /dev/mem opened. [2025-09-24 16:28:46.524] Memory mapped at address 0xffff9e901000. [2025-09-24 16:28:46.524] Read at address 0x00600018 (0xffff9e901018): 0x00000000 [2025-09-24 16:28:46.524] Write at address 0x00600018 (0xffff9e901018): 0x00400040, readback 0x00400040 [2025-09-24 16:28:46.524] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:28:46.524] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:28:46.636] Loaded PowerVR consumer services. [2025-09-24 16:28:46.794] Waiting data available... [2025-09-24 16:28:46.794] 512+0 records in [2025-09-24 16:28:46.794] 512+0 records out [2025-09-24 16:28:46.842] Starting syslogd/klogd: done [2025-09-24 16:28:46.858] DML Start [2025-09-24 16:28:47.034] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:28:47.274] DML res1: 0 [2025-09-24 16:28:47.690] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:28:47.706] Read Success [2025-09-24 16:28:47.706] Verifying certificate... [2025-09-24 16:28:48.010] Verified OK [2025-09-24 16:28:48.042] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:28:49.585] Verified OK [2025-09-24 16:28:49.585] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:28:50.220] Verified OK [2025-09-24 16:28:50.220] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:28:52.713] fs.protected_hardlinks = 1 [2025-09-24 16:28:52.713] fs.protected_symlinks = 1 [2025-09-24 16:28:52.729] kernel.modules_disabled = 1 [2025-09-24 16:28:52.938] [2025-09-24 16:28:52.938] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:28:54.353] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:29:02.039] SBL1:1210.0.1.0 [2025-09-24 16:29:02.071] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:29:03.655] SBL2:1210.0.1.0 [2025-09-24 16:29:03.687] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:29:03.799] j-A [2025-09-24 16:29:11.137] The R5 Autosar Classic is running [2025-09-24 16:29:11.168] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:29:11.168] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:29:11.776] INIT: version 2.96 booting [2025-09-24 16:29:11.887] INIT: Entering runlevel: 5 [2025-09-24 16:29:12.031] mtd24 attached [2025-09-24 16:29:12.047] mtd32 attached [2025-09-24 16:29:12.063] mtd28 attached [2025-09-24 16:29:12.095] ubi0:textures is mounted. [2025-09-24 16:29:12.111] ubi1:dml_code is mounted. [2025-09-24 16:29:12.111] RTNETLINK answers: File exists [2025-09-24 16:29:12.176] ubi2:animations is mounted. [2025-09-24 16:29:12.176] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:29:12.176] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:29:12.176] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:29:12.176] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:29:12.176] data.LB_FadeInType0=100 [2025-09-24 16:29:12.176] data.CHLH_FadeInType0=0 [2025-09-24 16:29:12.176] data.WU_FadeInDelay=0 [2025-09-24 16:29:12.176] max_time_out=0 [2025-09-24 16:29:12.176] No splash screen [2025-09-24 16:29:12.176] stop dss Done [2025-09-24 16:29:12.176] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:29:12.259] /dev/mem opened. [2025-09-24 16:29:12.259] Memory mapped at address 0xffff81e54000. [2025-09-24 16:29:12.259] Read at address 0x00600018 (0xffff81e54018): 0x00000000 [2025-09-24 16:29:12.259] Write at address 0x00600018 (0xffff81e54018): 0x00400040, readback 0x00400040 [2025-09-24 16:29:12.259] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:29:12.259] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:29:12.467] Loaded PowerVR consumer services. [2025-09-24 16:29:12.483] Waiting data available... [2025-09-24 16:29:12.499] 512+0 records in [2025-09-24 16:29:12.515] 512+0 records out [2025-09-24 16:29:12.547] Starting syslogd/klogd: done [2025-09-24 16:29:12.563] DML Start [2025-09-24 16:29:12.755] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:29:12.995] DML res1: 0 [2025-09-24 16:29:13.423] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:29:13.423] Read Success [2025-09-24 16:29:13.423] Verifying certificate... [2025-09-24 16:29:13.648] Verified OK [2025-09-24 16:29:13.663] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:29:15.339] Verified OK [2025-09-24 16:29:15.339] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:29:15.988] Verified OK [2025-09-24 16:29:15.988] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:29:18.594] fs.protected_hardlinks = 1 [2025-09-24 16:29:18.621] fs.protected_symlinks = 1 [2025-09-24 16:29:18.621] kernel.modules_disabled = 1 [2025-09-24 16:29:18.797] [2025-09-24 16:29:18.797] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:29:20.065] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:29:27.728] SBL1:1210.0.1.0 [2025-09-24 16:29:27.776] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:29:29.342] SBL2:1210.0.1.0 [2025-09-24 16:29:29.373] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:29:29.486] j-A [2025-09-24 16:29:36.840] The R5 Autosar Classic is running [2025-09-24 16:29:36.840] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:29:36.861] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:29:37.469] INIT: version 2.96 booting [2025-09-24 16:29:37.580] INIT: Entering runlevel: 5 [2025-09-24 16:29:37.725] mtd24 attached [2025-09-24 16:29:37.757] mtd28 attached [2025-09-24 16:29:37.757] ubi0:textures is mounted. [2025-09-24 16:29:37.773] mtd32 attached [2025-09-24 16:29:37.805] ubi1:animations is mounted. [2025-09-24 16:29:37.805] RTNETLINK answers: File exists [2025-09-24 16:29:37.861] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:29:37.861] ubi2:dml_code is mounted. [2025-09-24 16:29:37.861] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:29:37.861] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:29:37.861] data.LB_FadeInType0=100 [2025-09-24 16:29:37.861] data.CHLH_FadeInType0=0 [2025-09-24 16:29:37.861] data.WU_FadeInDelay=0 [2025-09-24 16:29:37.861] max_time_out=0 [2025-09-24 16:29:37.861] No splash screen [2025-09-24 16:29:37.861] stop dss Done [2025-09-24 16:29:37.861] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:29:37.861] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:29:37.909] /dev/mem opened. [2025-09-24 16:29:37.940] Memory mapped at address 0xffffaed74000. [2025-09-24 16:29:37.940] Read at address 0x00600018 (0xffffaed74018): 0x00000000 [2025-09-24 16:29:37.940] Write at address 0x00600018 (0xffffaed74018): 0x00400040, readback 0x00400040 [2025-09-24 16:29:37.956] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:29:37.972] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:29:38.180] Loaded PowerVR consumer services. [2025-09-24 16:29:38.228] 512+0 records in [2025-09-24 16:29:38.228] 512+0 records out [2025-09-24 16:29:38.228] Waiting data available... [2025-09-24 16:29:38.260] Starting syslogd/klogd: done [2025-09-24 16:29:38.276] DML Start [2025-09-24 16:29:38.469] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:29:38.660] DML res1: 0 [2025-09-24 16:29:39.155] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:29:39.176] Read Success [2025-09-24 16:29:39.176] Verifying certificate... [2025-09-24 16:29:39.416] Verified OK [2025-09-24 16:29:39.432] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:29:41.096] Verified OK [2025-09-24 16:29:41.096] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:29:41.733] Verified OK [2025-09-24 16:29:41.733] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:29:44.339] fs.protected_hardlinks = 1 [2025-09-24 16:29:44.356] fs.protected_symlinks = 1 [2025-09-24 16:29:44.356] kernel.modules_disabled = 1 [2025-09-24 16:29:44.547] [2025-09-24 16:29:44.547] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:29:45.730] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:29:53.428] SBL1:1210.0.1.0 [2025-09-24 16:29:53.476] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:29:55.043] SBL2:1210.0.1.0 [2025-09-24 16:29:55.090] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:29:55.187] j-A [2025-09-24 16:30:02.541] The R5 Autosar Classic is running [2025-09-24 16:30:02.541] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:30:02.562] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:30:03.170] INIT: version 2.96 booting [2025-09-24 16:30:03.282] INIT: Entering runlevel: 5 [2025-09-24 16:30:03.426] mtd28 attached [2025-09-24 16:30:03.442] mtd32 attached [2025-09-24 16:30:03.458] mtd24 attached [2025-09-24 16:30:03.474] ubi0:animations is mounted. [2025-09-24 16:30:03.506] RTNETLINK answers: File exists [2025-09-24 16:30:03.542] ubi1:dml_code is mounted. [2025-09-24 16:30:03.542] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:30:03.542] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:30:03.542] ubi2:textures is mounted. [2025-09-24 16:30:03.542] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:30:03.542] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:30:03.542] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:30:03.571] data.LB_FadeInType0=100 [2025-09-24 16:30:03.571] data.CHLH_FadeInType0=0 [2025-09-24 16:30:03.571] data.WU_FadeInDelay=0 [2025-09-24 16:30:03.571] max_time_out=0 [2025-09-24 16:30:03.571] No splash screen [2025-09-24 16:30:03.571] stop dss Done [2025-09-24 16:30:03.602] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:30:03.602] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:30:03.643] /dev/mem opened. [2025-09-24 16:30:03.643] Memory mapped at address 0xffffa64e4000. [2025-09-24 16:30:03.643] Read at address 0x00600018 (0xffffa64e4018): 0x00000000 [2025-09-24 16:30:03.643] Write at address 0x00600018 (0xffffa64e4018): 0x00400040, readback 0x00400040 [2025-09-24 16:30:03.868] Loaded PowerVR consumer services. [2025-09-24 16:30:03.929] 512+0 records in [2025-09-24 16:30:03.929] 512+0 records out [2025-09-24 16:30:03.929] Waiting data available... [2025-09-24 16:30:03.960] Starting syslogd/klogd: done [2025-09-24 16:30:03.976] DML Start [2025-09-24 16:30:04.120] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:30:04.344] DML res1: 0 [2025-09-24 16:30:04.824] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:30:04.845] Read Success [2025-09-24 16:30:04.845] Verifying certificate... [2025-09-24 16:30:05.068] Verified OK [2025-09-24 16:30:05.084] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:30:06.794] Verified OK [2025-09-24 16:30:06.794] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:30:07.370] Verified OK [2025-09-24 16:30:07.370] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:30:10.025] fs.protected_hardlinks = 1 [2025-09-24 16:30:10.041] fs.protected_symlinks = 1 [2025-09-24 16:30:10.041] kernel.modules_disabled = 1 [2025-09-24 16:30:10.248] [2025-09-24 16:30:10.248] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:30:11.462] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:30:19.140] SBL1:1210.0.1.0 [2025-09-24 16:30:19.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:30:20.756] SBL2:1210.0.1.0 [2025-09-24 16:30:20.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:30:20.900] j-A [2025-09-24 16:30:28.254] The R5 Autosar Classic is running [2025-09-24 16:30:28.254] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:30:28.275] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:30:28.882] INIT: version 2.96 booting [2025-09-24 16:30:28.994] INIT: Entering runlevel: 5 [2025-09-24 16:30:29.139] mtd24 attached [2025-09-24 16:30:29.155] mtd28 attached [2025-09-24 16:30:29.171] mtd32 attached [2025-09-24 16:30:29.203] ubi0:textures is mounted. [2025-09-24 16:30:29.219] ubi1:animations is mounted. [2025-09-24 16:30:29.219] RTNETLINK answers: File exists [2025-09-24 16:30:29.279] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:30:29.279] ubi2:dml_code is mounted. [2025-09-24 16:30:29.279] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:30:29.279] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:30:29.279] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:30:29.279] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:30:29.279] data.LB_FadeInType0=100 [2025-09-24 16:30:29.279] data.CHLH_FadeInType0=0 [2025-09-24 16:30:29.279] data.WU_FadeInDelay=0 [2025-09-24 16:30:29.279] max_time_out=0 [2025-09-24 16:30:29.279] No splash screen [2025-09-24 16:30:29.279] stop dss Done [2025-09-24 16:30:29.319] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:30:29.319] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:30:29.357] /dev/mem opened. [2025-09-24 16:30:29.357] Memory mapped at address 0xffffaf78d000. [2025-09-24 16:30:29.357] Read at address 0x00600018 (0xffffaf78d018): 0x00000000 [2025-09-24 16:30:29.357] Write at address 0x00600018 (0xffffaf78d018): 0x00400040, readback 0x00400040 [2025-09-24 16:30:29.549] Loaded PowerVR consumer services. [2025-09-24 16:30:29.642] 512+0 records in [2025-09-24 16:30:29.642] 512+0 records out [2025-09-24 16:30:29.642] Waiting data available... [2025-09-24 16:30:29.658] Starting syslogd/klogd: done [2025-09-24 16:30:29.673] DML Start [2025-09-24 16:30:29.866] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:30:30.106] DML res1: 0 [2025-09-24 16:30:30.498] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:30:30.498] Read Success [2025-09-24 16:30:30.498] Verifying certificate... [2025-09-24 16:30:30.753] Verified OK [2025-09-24 16:30:30.769] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:30:32.463] Verified OK [2025-09-24 16:30:32.463] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:30:33.030] Verified OK [2025-09-24 16:30:33.030] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:30:35.602] fs.protected_hardlinks = 1 [2025-09-24 16:30:35.602] fs.protected_symlinks = 1 [2025-09-24 16:30:35.602] kernel.modules_disabled = 1 [2025-09-24 16:30:35.794] [2025-09-24 16:30:35.794] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:30:37.152] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:30:44.845] SBL1:1210.0.1.0 [2025-09-24 16:30:44.893] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:30:46.460] SBL2:1210.0.1.0 [2025-09-24 16:30:46.507] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:30:46.604] j-A [2025-09-24 16:30:53.958] The R5 Autosar Classic is running [2025-09-24 16:30:53.982] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:30:53.982] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:30:54.589] INIT: version 2.96 booting [2025-09-24 16:30:54.701] INIT: Entering runlevel: 5 [2025-09-24 16:30:54.861] mtd24 attached [2025-09-24 16:30:54.861] mtd28 attached [2025-09-24 16:30:54.877] mtd32 attached [2025-09-24 16:30:54.982] RTNETLINK answers: File exists [2025-09-24 16:30:54.982] ubi0:textures is mounted. [2025-09-24 16:30:54.982] ubi1:animations is mounted. [2025-09-24 16:30:54.982] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:30:54.982] ubi2:dml_code is mounted. [2025-09-24 16:30:54.982] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:30:54.982] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:30:54.982] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:30:54.982] data.LB_FadeInType0=100 [2025-09-24 16:30:54.982] data.CHLH_FadeInType0=0 [2025-09-24 16:30:54.982] data.WU_FadeInDelay=0 [2025-09-24 16:30:54.982] max_time_out=0 [2025-09-24 16:30:54.982] No splash screen [2025-09-24 16:30:54.982] stop dss Done [2025-09-24 16:30:54.982] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:30:55.029] /dev/mem opened. [2025-09-24 16:30:55.029] Memory mapped at address 0xffff8f898000. [2025-09-24 16:30:55.055] Read at address 0x00600018 (0xffff8f898018): 0x00000000 [2025-09-24 16:30:55.055] Write at address 0x00600018 (0xffff8f898018): 0x00400040, readback 0x00400040 [2025-09-24 16:30:55.071] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:30:55.087] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:30:55.296] Loaded PowerVR consumer services. [2025-09-24 16:30:55.343] Waiting data available... [2025-09-24 16:30:55.343] 512+0 records in [2025-09-24 16:30:55.359] 512+0 records out [2025-09-24 16:30:55.407] Starting syslogd/klogd: done [2025-09-24 16:30:55.423] DML Start [2025-09-24 16:30:55.599] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:30:55.839] DML res1: 0 [2025-09-24 16:30:56.234] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:30:56.234] Read Success [2025-09-24 16:30:56.234] Verifying certificate... [2025-09-24 16:30:56.458] Verified OK [2025-09-24 16:30:56.474] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:30:58.104] Verified OK [2025-09-24 16:30:58.104] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:30:58.750] Verified OK [2025-09-24 16:30:58.750] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:31:01.436] fs.protected_hardlinks = 1 [2025-09-24 16:31:01.452] fs.protected_symlinks = 1 [2025-09-24 16:31:01.452] kernel.modules_disabled = 1 [2025-09-24 16:31:01.644] [2025-09-24 16:31:01.644] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:31:02.946] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:31:10.573] SBL1:1210.0.1.0 [2025-09-24 16:31:10.605] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:31:12.188] SBL2:1210.0.1.0 [2025-09-24 16:31:12.220] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:31:12.331] j-A [2025-09-24 16:31:19.702] The R5 Autosar Classic is running [2025-09-24 16:31:19.702] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:31:19.702] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:31:20.310] INIT: version 2.96 booting [2025-09-24 16:31:20.406] INIT: Entering runlevel: 5 [2025-09-24 16:31:20.566] mtd24 attached [2025-09-24 16:31:20.582] mtd28 attached [2025-09-24 16:31:20.598] mtd32 attached [2025-09-24 16:31:20.680] RTNETLINK answers: File exists [2025-09-24 16:31:20.680] ubi0:textures is mounted. [2025-09-24 16:31:20.680] ubi1:animations is mounted. [2025-09-24 16:31:20.680] ubi2:dml_code is mounted. [2025-09-24 16:31:20.680] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:31:20.680] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:31:20.680] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:31:20.680] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:31:20.712] data.LB_FadeInType0=100 [2025-09-24 16:31:20.712] data.CHLH_FadeInType0=0 [2025-09-24 16:31:20.712] data.WU_FadeInDelay=0 [2025-09-24 16:31:20.712] max_time_out=0 [2025-09-24 16:31:20.712] No splash screen [2025-09-24 16:31:20.712] stop dss Done [2025-09-24 16:31:20.712] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:31:20.785] /dev/mem opened. [2025-09-24 16:31:20.785] Memory mapped at address 0xffff9b106000. [2025-09-24 16:31:20.785] Read at address 0x00600018 (0xffff9b106018): 0x00000000 [2025-09-24 16:31:20.785] Write at address 0x00600018 (0xffff9b106018): 0x00400040, readback 0x00400040 [2025-09-24 16:31:20.811] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:31:20.811] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:31:20.987] Loaded PowerVR consumer services. [2025-09-24 16:31:21.019] Waiting data available... [2025-09-24 16:31:21.035] 512+0 records in [2025-09-24 16:31:21.035] 512+0 records out [2025-09-24 16:31:21.083] Starting syslogd/klogd: done [2025-09-24 16:31:21.099] DML Start [2025-09-24 16:31:21.275] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:31:21.499] DML res1: 0 [2025-09-24 16:31:21.930] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:31:21.946] Read Success [2025-09-24 16:31:21.946] Verifying certificate... [2025-09-24 16:31:22.219] Verified OK [2025-09-24 16:31:22.250] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:31:23.814] Verified OK [2025-09-24 16:31:23.814] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:31:24.450] Verified OK [2025-09-24 16:31:24.450] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:31:27.168] fs.protected_hardlinks = 1 [2025-09-24 16:31:27.184] fs.protected_symlinks = 1 [2025-09-24 16:31:27.184] kernel.modules_disabled = 1 [2025-09-24 16:31:27.376] [2025-09-24 16:31:27.376] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:31:28.586] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:31:36.274] SBL1:1210.0.1.0 [2025-09-24 16:31:36.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:31:37.889] SBL2:1210.0.1.0 [2025-09-24 16:31:37.938] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:31:38.033] j-A [2025-09-24 16:31:45.386] The R5 Autosar Classic is running [2025-09-24 16:31:45.411] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:31:45.411] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:31:46.019] INIT: version 2.96 booting [2025-09-24 16:31:46.131] INIT: Entering runlevel: 5 [2025-09-24 16:31:46.291] mtd32 attached [2025-09-24 16:31:46.307] mtd24 attached [2025-09-24 16:31:46.323] mtd28 attached [2025-09-24 16:31:46.354] ubi1:textures is mounted. [2025-09-24 16:31:46.420] ubi0:dml_code is mounted. [2025-09-24 16:31:46.420] RTNETLINK answers: File exists [2025-09-24 16:31:46.420] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:31:46.420] ubi2:animations is mounted. [2025-09-24 16:31:46.420] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:31:46.420] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:31:46.420] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:31:46.420] data.LB_FadeInType0=100 [2025-09-24 16:31:46.420] data.CHLH_FadeInType0=0 [2025-09-24 16:31:46.420] data.WU_FadeInDelay=0 [2025-09-24 16:31:46.420] max_time_out=0 [2025-09-24 16:31:46.420] No splash screen [2025-09-24 16:31:46.420] stop dss Done [2025-09-24 16:31:46.420] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:31:46.493] /dev/mem opened. [2025-09-24 16:31:46.493] Memory mapped at address 0xffffb7559000. [2025-09-24 16:31:46.493] Read at address 0x00600018 (0xffffb7559018): 0x00000000 [2025-09-24 16:31:46.493] Write at address 0x00600018 (0xffffb7559018): 0x00400040, readback 0x00400040 [2025-09-24 16:31:46.509] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:31:46.525] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:31:46.765] Loaded PowerVR consumer services. [2025-09-24 16:31:46.765] Waiting data available... [2025-09-24 16:31:46.781] 512+0 records in [2025-09-24 16:31:46.781] 512+0 records out [2025-09-24 16:31:46.828] Starting syslogd/klogd: done [2025-09-24 16:31:46.844] DML Start [2025-09-24 16:31:47.020] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:31:47.228] DML res1: 0 [2025-09-24 16:31:47.644] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:31:47.665] Read Success [2025-09-24 16:31:47.665] Verifying certificate... [2025-09-24 16:31:47.889] Verified OK [2025-09-24 16:31:47.904] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:31:49.535] Verified OK [2025-09-24 16:31:49.535] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:31:50.126] Verified OK [2025-09-24 16:31:50.142] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:31:52.748] fs.protected_hardlinks = 1 [2025-09-24 16:31:52.748] fs.protected_symlinks = 1 [2025-09-24 16:31:52.764] kernel.modules_disabled = 1 [2025-09-24 16:31:52.956] [2025-09-24 16:31:52.956] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:31:54.293] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:32:02.000] SBL1:1210.0.1.0 [2025-09-24 16:32:02.048] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:32:03.615] SBL2:1210.0.1.0 [2025-09-24 16:32:03.663] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:32:03.759] j-A [2025-09-24 16:32:11.112] The R5 Autosar Classic is running [2025-09-24 16:32:11.137] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:32:11.137] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:32:11.744] INIT: version 2.96 booting [2025-09-24 16:32:11.857] INIT: Entering runlevel: 5 [2025-09-24 16:32:12.016] mtd24 attached [2025-09-24 16:32:12.032] mtd32 attached [2025-09-24 16:32:12.032] mtd28 attached [2025-09-24 16:32:12.080] ubi0:textures is mounted. [2025-09-24 16:32:12.080] ubi1:dml_code is mounted. [2025-09-24 16:32:12.096] RTNETLINK answers: File exists [2025-09-24 16:32:12.096] ubi2:animations is mounted. [2025-09-24 16:32:12.147] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:32:12.147] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:32:12.147] data.LB_FadeInType0=100 [2025-09-24 16:32:12.147] data.CHLH_FadeInType0=0 [2025-09-24 16:32:12.147] data.WU_FadeInDelay=0 [2025-09-24 16:32:12.147] max_time_out=0 [2025-09-24 16:32:12.147] No splash screen [2025-09-24 16:32:12.147] stop dss Done [2025-09-24 16:32:12.147] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:32:12.147] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:32:12.147] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:32:12.179] /dev/mem opened. [2025-09-24 16:32:12.179] Memory mapped at address 0xffffbdf9f000. [2025-09-24 16:32:12.211] Read at address 0x00600018 (0xffffbdf9f018): 0x00000000 [2025-09-24 16:32:12.211] Write at address 0x00600018 (0xffffbdf9f018): 0x00400040, readback 0x00400040 [2025-09-24 16:32:12.211] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:32:12.211] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:32:12.354] Loaded PowerVR consumer services. [2025-09-24 16:32:12.467] Waiting data available... [2025-09-24 16:32:12.483] 512+0 records in [2025-09-24 16:32:12.483] 512+0 records out [2025-09-24 16:32:12.515] Starting syslogd/klogd: done [2025-09-24 16:32:12.531] DML Start [2025-09-24 16:32:12.723] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:32:12.931] DML res1: 0 [2025-09-24 16:32:13.407] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:32:13.407] Read Success [2025-09-24 16:32:13.407] Verifying certificate... [2025-09-24 16:32:13.631] Verified OK [2025-09-24 16:32:13.647] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:32:15.272] Verified OK [2025-09-24 16:32:15.272] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:32:15.956] Verified OK [2025-09-24 16:32:15.956] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:32:18.626] fs.protected_hardlinks = 1 [2025-09-24 16:32:18.626] fs.protected_symlinks = 1 [2025-09-24 16:32:18.642] kernel.modules_disabled = 1 [2025-09-24 16:32:18.818] [2025-09-24 16:32:18.818] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:32:20.016] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:32:27.726] SBL1:1210.0.1.0 [2025-09-24 16:32:27.758] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:32:29.341] SBL2:1210.0.1.0 [2025-09-24 16:32:29.373] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:32:29.485] j-A [2025-09-24 16:32:36.858] The R5 Autosar Classic is running [2025-09-24 16:32:36.858] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:32:36.858] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:32:37.465] INIT: version 2.96 booting [2025-09-24 16:32:37.578] INIT: Entering runlevel: 5 [2025-09-24 16:32:37.720] mtd24 attached [2025-09-24 16:32:37.738] mtd32 attached [2025-09-24 16:32:37.738] mtd28 attached [2025-09-24 16:32:37.785] ubi0:textures is mounted. [2025-09-24 16:32:37.785] RTNETLINK answers: File exists [2025-09-24 16:32:37.856] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:32:37.856] ubi2:animations is mounted. [2025-09-24 16:32:37.856] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:32:37.856] ubi1:dml_code is mounted. [2025-09-24 16:32:37.856] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:32:37.856] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:32:37.856] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:32:37.856] data.LB_FadeInType0=100 [2025-09-24 16:32:37.856] data.CHLH_FadeInType0=0 [2025-09-24 16:32:37.856] data.WU_FadeInDelay=0 [2025-09-24 16:32:37.856] max_time_out=0 [2025-09-24 16:32:37.856] No splash screen [2025-09-24 16:32:37.856] stop dss Done [2025-09-24 16:32:37.930] /dev/mem opened. [2025-09-24 16:32:37.930] Memory mapped at address 0xffffa1331000. [2025-09-24 16:32:37.930] Read at address 0x00600018 (0xffffa1331018): 0x00000000 [2025-09-24 16:32:37.930] Write at address 0x00600018 (0xffffa1331018): 0x00400040, readback 0x00400040 [2025-09-24 16:32:37.930] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:32:37.930] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:32:38.074] Loaded PowerVR consumer services. [2025-09-24 16:32:38.186] Waiting data available... [2025-09-24 16:32:38.201] 512+0 records in [2025-09-24 16:32:38.201] 512+0 records out [2025-09-24 16:32:38.249] Starting syslogd/klogd: done [2025-09-24 16:32:38.266] DML Start [2025-09-24 16:32:38.473] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:32:38.697] DML res1: 0 [2025-09-24 16:32:39.111] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:32:39.111] Read Success [2025-09-24 16:32:39.111] Verifying certificate... [2025-09-24 16:32:39.335] Verified OK [2025-09-24 16:32:39.350] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:32:41.141] Verified OK [2025-09-24 16:32:41.141] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:32:41.706] Verified OK [2025-09-24 16:32:41.706] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:32:44.232] fs.protected_hardlinks = 1 [2025-09-24 16:32:44.260] fs.protected_symlinks = 1 [2025-09-24 16:32:44.260] kernel.modules_disabled = 1 [2025-09-24 16:32:44.435] [2025-09-24 16:32:44.435] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:32:45.773] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:32:53.414] SBL1:1210.0.1.0 [2025-09-24 16:32:53.462] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:32:55.029] SBL2:1210.0.1.0 [2025-09-24 16:32:55.077] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:32:55.173] j-A [2025-09-24 16:33:02.527] The R5 Autosar Classic is running [2025-09-24 16:33:02.552] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:33:02.552] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:33:03.159] INIT: version 2.96 booting [2025-09-24 16:33:03.271] INIT: Entering runlevel: 5 [2025-09-24 16:33:03.431] mtd24 attached [2025-09-24 16:33:03.447] mtd28 attached [2025-09-24 16:33:03.462] mtd32 attached [2025-09-24 16:33:03.494] ubi0:textures is mounted. [2025-09-24 16:33:03.515] ubi1:animations is mounted. [2025-09-24 16:33:03.515] RTNETLINK answers: File exists [2025-09-24 16:33:03.515] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:33:03.515] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:33:03.562] ubi2:dml_code is mounted. [2025-09-24 16:33:03.562] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:33:03.562] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:33:03.562] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:33:03.562] data.LB_FadeInType0=100 [2025-09-24 16:33:03.562] data.CHLH_FadeInType0=0 [2025-09-24 16:33:03.562] data.WU_FadeInDelay=0 [2025-09-24 16:33:03.562] max_time_out=0 [2025-09-24 16:33:03.562] No splash screen [2025-09-24 16:33:03.562] stop dss Done [2025-09-24 16:33:03.594] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:33:03.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:33:03.644] /dev/mem opened. [2025-09-24 16:33:03.644] Memory mapped at address 0xffff9730f000. [2025-09-24 16:33:03.644] Read at address 0x00600018 (0xffff9730f018): 0x00000000 [2025-09-24 16:33:03.644] Write at address 0x00600018 (0xffff9730f018): 0x00400040, readback 0x00400040 [2025-09-24 16:33:03.725] Loaded PowerVR consumer services. [2025-09-24 16:33:03.914] Waiting data available... [2025-09-24 16:33:03.914] 512+0 records in [2025-09-24 16:33:03.914] 512+0 records out [2025-09-24 16:33:03.929] Starting syslogd/klogd: done [2025-09-24 16:33:03.945] DML Start [2025-09-24 16:33:04.137] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:33:04.409] DML res1: 0 [2025-09-24 16:33:04.745] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:33:04.745] Read Success [2025-09-24 16:33:04.761] Verifying certificate... [2025-09-24 16:33:05.033] Verified OK [2025-09-24 16:33:05.049] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:33:06.757] Verified OK [2025-09-24 16:33:06.757] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:33:07.411] Verified OK [2025-09-24 16:33:07.411] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:33:09.986] fs.protected_hardlinks = 1 [2025-09-24 16:33:10.002] fs.protected_symlinks = 1 [2025-09-24 16:33:10.002] kernel.modules_disabled = 1 [2025-09-24 16:33:10.209] [2025-09-24 16:33:10.209] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:33:11.439] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:33:19.151] SBL1:1210.0.1.0 [2025-09-24 16:33:19.183] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:33:20.765] SBL2:1210.0.1.0 [2025-09-24 16:33:20.796] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:33:20.909] j-A [2025-09-24 16:33:28.282] The R5 Autosar Classic is running [2025-09-24 16:33:28.282] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:33:28.282] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:33:28.889] INIT: version 2.96 booting [2025-09-24 16:33:29.001] INIT: Entering runlevel: 5 [2025-09-24 16:33:29.161] mtd28 attached [2025-09-24 16:33:29.161] mtd24 attached [2025-09-24 16:33:29.177] mtd32 attached [2025-09-24 16:33:29.209] ubi1:textures is mounted. [2025-09-24 16:33:29.225] ubi0:animations is mounted. [2025-09-24 16:33:29.225] RTNETLINK answers: File exists [2025-09-24 16:33:29.283] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:33:29.283] ubi2:dml_code is mounted. [2025-09-24 16:33:29.283] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:33:29.283] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:33:29.283] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:33:29.283] data.LB_FadeInType0=100 [2025-09-24 16:33:29.283] data.CHLH_FadeInType0=0 [2025-09-24 16:33:29.283] data.WU_FadeInDelay=0 [2025-09-24 16:33:29.283] max_time_out=0 [2025-09-24 16:33:29.283] No splash screen [2025-09-24 16:33:29.283] stop dss Done [2025-09-24 16:33:29.283] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:33:29.356] /dev/mem opened. [2025-09-24 16:33:29.356] Memory mapped at address 0xffff9ddb6000. [2025-09-24 16:33:29.356] Read at address 0x00600018 (0xffff9ddb6018): 0x00000000 [2025-09-24 16:33:29.356] Write at address 0x00600018 (0xffff9ddb6018): 0x00400040, readback 0x00400040 [2025-09-24 16:33:29.401] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:33:29.401] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:33:29.481] Loaded PowerVR consumer services. [2025-09-24 16:33:29.609] Waiting data available... [2025-09-24 16:33:29.609] 512+0 records in [2025-09-24 16:33:29.624] 512+0 records out [2025-09-24 16:33:29.640] Starting syslogd/klogd: done [2025-09-24 16:33:29.656] DML Start [2025-09-24 16:33:29.832] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:33:30.025] DML res1: 0 [2025-09-24 16:33:30.482] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:33:30.482] Read Success [2025-09-24 16:33:30.482] Verifying certificate... [2025-09-24 16:33:30.755] Verified OK [2025-09-24 16:33:30.771] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:33:32.440] Verified OK [2025-09-24 16:33:32.440] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:33:33.119] Verified OK [2025-09-24 16:33:33.119] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:33:35.789] fs.protected_hardlinks = 1 [2025-09-24 16:33:35.805] fs.protected_symlinks = 1 [2025-09-24 16:33:35.805] kernel.modules_disabled = 1 [2025-09-24 16:33:36.013] [2025-09-24 16:33:36.013] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:33:37.114] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:33:44.862] SBL1:1210.0.1.0 [2025-09-24 16:33:44.910] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:33:46.477] SBL2:1210.0.1.0 [2025-09-24 16:33:46.508] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 16:33:46.620] j-A [2025-09-24 16:33:53.975] The R5 Autosar Classic is running [2025-09-24 16:33:53.975] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:33:53.996] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:33:54.604] INIT: version 2.96 booting [2025-09-24 16:33:54.716] INIT: Entering runlevel: 5 [2025-09-24 16:33:54.875] mtd32 attached [2025-09-24 16:33:54.875] mtd24 attached [2025-09-24 16:33:54.891] mtd28 attached [2025-09-24 16:33:54.923] ubi0:dml_code is mounted. [2025-09-24 16:33:54.939] ubi1:textures is mounted. [2025-09-24 16:33:54.939] RTNETLINK answers: File exists [2025-09-24 16:33:54.998] ubi2:animations is mounted. [2025-09-24 16:33:54.998] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:33:54.998] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:33:54.998] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:33:54.998] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:33:54.998] data.LB_FadeInType0=100 [2025-09-24 16:33:54.998] data.CHLH_FadeInType0=0 [2025-09-24 16:33:54.998] data.WU_FadeInDelay=0 [2025-09-24 16:33:54.998] max_time_out=0 [2025-09-24 16:33:54.998] No splash screen [2025-09-24 16:33:54.998] stop dss Done [2025-09-24 16:33:54.998] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:33:55.068] /dev/mem opened. [2025-09-24 16:33:55.068] Memory mapped at address 0xffff86a28000. [2025-09-24 16:33:55.068] Read at address 0x00600018 (0xffff86a28018): 0x00000000 [2025-09-24 16:33:55.068] Write at address 0x00600018 (0xffff86a28018): 0x00400040, readback 0x00400040 [2025-09-24 16:33:55.100] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:33:55.116] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:33:55.308] Loaded PowerVR consumer services. [2025-09-24 16:33:55.353] 512+0 records in [2025-09-24 16:33:55.353] 512+0 records out [2025-09-24 16:33:55.353] Waiting data available... [2025-09-24 16:33:55.385] Starting syslogd/klogd: done [2025-09-24 16:33:55.401] DML Start [2025-09-24 16:33:55.577] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:33:55.784] DML res1: 0 [2025-09-24 16:33:56.264] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:33:56.286] Read Success [2025-09-24 16:33:56.286] Verifying certificate... [2025-09-24 16:33:56.525] Verified OK [2025-09-24 16:33:56.541] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:33:58.298] Verified OK [2025-09-24 16:33:58.298] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:33:58.899] Verified OK [2025-09-24 16:33:58.899] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:34:01.472] fs.protected_hardlinks = 1 [2025-09-24 16:34:01.472] fs.protected_symlinks = 1 [2025-09-24 16:34:01.472] kernel.modules_disabled = 1 [2025-09-24 16:34:01.664] [2025-09-24 16:34:01.664] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:34:02.824] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:34:10.564] SBL1:1210.0.1.0 [2025-09-24 16:34:10.612] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:34:12.180] SBL2:1210.0.1.0 [2025-09-24 16:34:12.227] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:34:12.339] j-A [2025-09-24 16:34:19.677] The R5 Autosar Classic is running [2025-09-24 16:34:19.702] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:34:19.702] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:34:20.311] INIT: version 2.96 booting [2025-09-24 16:34:20.422] INIT: Entering runlevel: 5 [2025-09-24 16:34:20.582] mtd28 attached [2025-09-24 16:34:20.582] mtd32 attached [2025-09-24 16:34:20.598] mtd24 attached [2025-09-24 16:34:20.647] RTNETLINK answers: File exists [2025-09-24 16:34:20.711] ubi2:textures is mounted. [2025-09-24 16:34:20.711] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:34:20.711] ubi0:animations is mounted. [2025-09-24 16:34:20.711] ubi1:dml_code is mounted. [2025-09-24 16:34:20.711] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:34:20.711] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:34:20.711] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:34:20.711] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:34:20.711] data.LB_FadeInType0=100 [2025-09-24 16:34:20.711] data.CHLH_FadeInType0=0 [2025-09-24 16:34:20.711] data.WU_FadeInDelay=0 [2025-09-24 16:34:20.711] max_time_out=0 [2025-09-24 16:34:20.711] No splash screen [2025-09-24 16:34:20.711] stop dss Done [2025-09-24 16:34:20.788] /dev/mem opened. [2025-09-24 16:34:20.788] Memory mapped at address 0xffffa4c42000. [2025-09-24 16:34:20.788] Read at address 0x00600018 (0xffffa4c42018): 0x00000000 [2025-09-24 16:34:20.788] Write at address 0x00600018 (0xffffa4c42018): 0x00400040, readback 0x00400040 [2025-09-24 16:34:20.788] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:34:20.788] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:34:20.964] Loaded PowerVR consumer services. [2025-09-24 16:34:21.060] Waiting data available... [2025-09-24 16:34:21.076] 512+0 records in [2025-09-24 16:34:21.076] 512+0 records out [2025-09-24 16:34:21.124] Starting syslogd/klogd: done [2025-09-24 16:34:21.140] DML Start [2025-09-24 16:34:21.300] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:34:21.524] DML res1: 0 [2025-09-24 16:34:21.994] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:34:21.994] Read Success [2025-09-24 16:34:21.994] Verifying certificate... [2025-09-24 16:34:22.266] Verified OK [2025-09-24 16:34:22.298] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:34:23.973] Verified OK [2025-09-24 16:34:23.973] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:34:24.634] Verified OK [2025-09-24 16:34:24.634] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:34:27.256] fs.protected_hardlinks = 1 [2025-09-24 16:34:27.256] fs.protected_symlinks = 1 [2025-09-24 16:34:27.272] kernel.modules_disabled = 1 [2025-09-24 16:34:27.448] [2025-09-24 16:34:27.448] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:34:28.560] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:34:30.870] SBL1:1210.0.1.0 [2025-09-24 16:34:36.320] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:34:37.887] SBL2:1210.0.1.0 [2025-09-24 16:34:37.935] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:34:38.031] j-A [2025-09-24 16:34:45.385] The R5 Autosar Classic is running [2025-09-24 16:34:45.410] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:34:45.410] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:34:46.018] INIT: version 2.96 booting [2025-09-24 16:34:46.130] INIT: Entering runlevel: 5 [2025-09-24 16:34:46.274] mtd28 attached [2025-09-24 16:34:46.290] mtd32 attached [2025-09-24 16:34:46.306] mtd24 attached [2025-09-24 16:34:46.338] ubi0:animations is mounted. [2025-09-24 16:34:46.354] RTNETLINK answers: File exists [2025-09-24 16:34:46.410] ubi2:textures is mounted. [2025-09-24 16:34:46.410] ubi1:dml_code is mounted. [2025-09-24 16:34:46.410] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:34:46.410] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:34:46.410] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:34:46.410] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:34:46.410] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:34:46.410] data.LB_FadeInType0=100 [2025-09-24 16:34:46.410] data.CHLH_FadeInType0=0 [2025-09-24 16:34:46.410] data.WU_FadeInDelay=0 [2025-09-24 16:34:46.410] max_time_out=0 [2025-09-24 16:34:46.410] No splash screen [2025-09-24 16:34:46.410] stop dss Done [2025-09-24 16:34:46.458] /dev/mem opened. [2025-09-24 16:34:46.458] Memory mapped at address 0xffffbdf91000. [2025-09-24 16:34:46.484] Read at address 0x00600018 (0xffffbdf91018): 0x00000000 [2025-09-24 16:34:46.484] Write at address 0x00600018 (0xffffbdf91018): 0x00400040, readback 0x00400040 [2025-09-24 16:34:46.484] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:34:46.500] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:34:46.627] Loaded PowerVR consumer services. [2025-09-24 16:34:46.751] Waiting data available... [2025-09-24 16:34:46.751] 512+0 records in [2025-09-24 16:34:46.751] 512+0 records out [2025-09-24 16:34:46.767] Starting syslogd/klogd: done [2025-09-24 16:34:46.783] DML Start [2025-09-24 16:34:46.943] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:34:47.184] DML res1: 0 [2025-09-24 16:34:47.647] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:34:47.663] Read Success [2025-09-24 16:34:47.663] Verifying certificate... [2025-09-24 16:34:47.903] Verified OK [2025-09-24 16:34:47.935] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:34:49.752] Verified OK [2025-09-24 16:34:49.752] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:34:50.232] Verified OK [2025-09-24 16:34:50.232] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:34:52.613] fs.protected_hardlinks = 1 [2025-09-24 16:34:52.629] fs.protected_symlinks = 1 [2025-09-24 16:34:52.629] kernel.modules_disabled = 1 [2025-09-24 16:34:52.838] [2025-09-24 16:34:52.838] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:34:54.286] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:35:01.993] SBL1:1210.0.1.0 [2025-09-24 16:35:02.025] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:35:03.609] SBL2:1210.0.1.0 [2025-09-24 16:35:03.641] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:35:03.752] j-A [2025-09-24 16:35:11.125] The R5 Autosar Classic is running [2025-09-24 16:35:11.125] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:35:11.125] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:35:11.733] INIT: version 2.96 booting [2025-09-24 16:35:11.829] INIT: Entering runlevel: 5 [2025-09-24 16:35:11.988] mtd24 attached [2025-09-24 16:35:12.004] mtd28 attached [2025-09-24 16:35:12.020] ubi0:textures is mounted. [2025-09-24 16:35:12.036] mtd32 attached [2025-09-24 16:35:12.069] RTNETLINK answers: File exists [2025-09-24 16:35:12.069] ubi1:animations is mounted. [2025-09-24 16:35:12.126] ubi2:dml_code is mounted. [2025-09-24 16:35:12.126] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:35:12.126] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:35:12.126] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:35:12.126] data.LB_FadeInType0=100 [2025-09-24 16:35:12.126] data.CHLH_FadeInType0=0 [2025-09-24 16:35:12.126] data.WU_FadeInDelay=0 [2025-09-24 16:35:12.126] max_time_out=0 [2025-09-24 16:35:12.126] No splash screen [2025-09-24 16:35:12.126] stop dss Done [2025-09-24 16:35:12.126] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:35:12.126] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:35:12.192] /dev/mem opened. [2025-09-24 16:35:12.192] Memory mapped at address 0xffff93e67000. [2025-09-24 16:35:12.192] Read at address 0x00600018 (0xffff93e67018): 0x00000000 [2025-09-24 16:35:12.192] Write at address 0x00600018 (0xffff93e67018): 0x00400040, readback 0x00400040 [2025-09-24 16:35:12.224] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:35:12.240] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:35:12.431] Loaded PowerVR consumer services. [2025-09-24 16:35:12.447] Waiting data available... [2025-09-24 16:35:12.463] 512+0 records in [2025-09-24 16:35:12.463] 512+0 records out [2025-09-24 16:35:12.511] Starting syslogd/klogd: done [2025-09-24 16:35:12.527] DML Start [2025-09-24 16:35:12.703] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:35:12.927] DML res1: 0 [2025-09-24 16:35:13.364] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:35:13.364] Read Success [2025-09-24 16:35:13.364] Verifying certificate... [2025-09-24 16:35:13.636] Verified OK [2025-09-24 16:35:13.668] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:35:15.234] Verified OK [2025-09-24 16:35:15.234] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:35:15.855] Verified OK [2025-09-24 16:35:15.855] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:35:18.412] fs.protected_hardlinks = 1 [2025-09-24 16:35:18.428] fs.protected_symlinks = 1 [2025-09-24 16:35:18.428] kernel.modules_disabled = 1 [2025-09-24 16:35:18.620] [2025-09-24 16:35:18.620] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:35:20.003] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:35:27.709] SBL1:1210.0.1.0 [2025-09-24 16:35:27.741] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:35:29.324] SBL2:1210.0.1.0 [2025-09-24 16:35:29.356] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:35:29.467] j-A [2025-09-24 16:35:36.842] The R5 Autosar Classic is running [2025-09-24 16:35:36.842] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:35:36.842] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:35:37.450] INIT: version 2.96 booting [2025-09-24 16:35:37.561] INIT: Entering runlevel: 5 [2025-09-24 16:35:37.705] mtd28 attached [2025-09-24 16:35:37.721] mtd32 attached [2025-09-24 16:35:37.721] mtd24 attached [2025-09-24 16:35:37.768] ubi0:animations is mounted. [2025-09-24 16:35:37.784] ubi1:dml_code is mounted. [2025-09-24 16:35:37.784] RTNETLINK answers: File exists [2025-09-24 16:35:37.837] ubi2:textures is mounted. [2025-09-24 16:35:37.837] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:35:37.837] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:35:37.837] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:35:37.837] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:35:37.837] data.LB_FadeInType0=100 [2025-09-24 16:35:37.837] data.CHLH_FadeInType0=0 [2025-09-24 16:35:37.837] data.WU_FadeInDelay=0 [2025-09-24 16:35:37.837] max_time_out=0 [2025-09-24 16:35:37.837] No splash screen [2025-09-24 16:35:37.837] stop dss Done [2025-09-24 16:35:37.837] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:35:37.925] /dev/mem opened. [2025-09-24 16:35:37.925] Memory mapped at address 0xffffb3d2d000. [2025-09-24 16:35:37.925] Read at address 0x00600018 (0xffffb3d2d018): 0x00000000 [2025-09-24 16:35:37.925] Write at address 0x00600018 (0xffffb3d2d018): 0x00400040, readback 0x00400040 [2025-09-24 16:35:37.925] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:35:37.925] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:35:38.100] Loaded PowerVR consumer services. [2025-09-24 16:35:38.180] Waiting data available... [2025-09-24 16:35:38.180] 512+0 records in [2025-09-24 16:35:38.196] 512+0 records out [2025-09-24 16:35:38.212] Starting syslogd/klogd: done [2025-09-24 16:35:38.245] DML Start [2025-09-24 16:35:38.404] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:35:38.660] DML res1: 0 [2025-09-24 16:35:39.055] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:35:39.055] Read Success [2025-09-24 16:35:39.055] Verifying certificate... [2025-09-24 16:35:39.295] Verified OK [2025-09-24 16:35:39.327] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:35:41.083] Verified OK [2025-09-24 16:35:41.083] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:35:41.637] Verified OK [2025-09-24 16:35:41.637] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:35:44.067] fs.protected_hardlinks = 1 [2025-09-24 16:35:44.067] fs.protected_symlinks = 1 [2025-09-24 16:35:44.083] kernel.modules_disabled = 1 [2025-09-24 16:35:44.275] [2025-09-24 16:35:44.275] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:35:45.728] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:35:53.425] SBL1:1210.0.1.0 [2025-09-24 16:35:53.473] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:35:55.039] SBL2:1210.0.1.0 [2025-09-24 16:35:55.086] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:35:55.182] j-A [2025-09-24 16:36:02.536] The R5 Autosar Classic is running [2025-09-24 16:36:02.558] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:36:02.558] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:36:03.166] INIT: version 2.96 booting [2025-09-24 16:36:03.278] INIT: Entering runlevel: 5 [2025-09-24 16:36:03.422] mtd24 attached [2025-09-24 16:36:03.438] mtd32 attached [2025-09-24 16:36:03.454] mtd28 attached [2025-09-24 16:36:03.502] RTNETLINK answers: File exists [2025-09-24 16:36:03.542] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:36:03.542] ubi0:textures is mounted. [2025-09-24 16:36:03.542] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:36:03.542] ubi1:dml_code is mounted. [2025-09-24 16:36:03.542] ubi2:animations is mounted. [2025-09-24 16:36:03.542] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:36:03.542] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:36:03.542] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:36:03.542] data.LB_FadeInType0=100 [2025-09-24 16:36:03.542] data.CHLH_FadeInType0=0 [2025-09-24 16:36:03.563] data.WU_FadeInDelay=0 [2025-09-24 16:36:03.563] max_time_out=0 [2025-09-24 16:36:03.563] No splash screen [2025-09-24 16:36:03.563] stop dss Done [2025-09-24 16:36:03.632] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:36:03.632] /dev/mem opened. [2025-09-24 16:36:03.632] Memory mapped at address 0xffffaaf1c000. [2025-09-24 16:36:03.632] Read at address 0x00600018 (0xffffaaf1c018): 0x00000000 [2025-09-24 16:36:03.632] Write at address 0x00600018 (0xffffaaf1c018): 0x00400040, readback 0x00400040 [2025-09-24 16:36:03.632] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:36:03.728] Loaded PowerVR consumer services. [2025-09-24 16:36:03.872] Waiting data available... [2025-09-24 16:36:03.888] 512+0 records in [2025-09-24 16:36:03.904] 512+0 records out [2025-09-24 16:36:03.936] Starting syslogd/klogd: done [2025-09-24 16:36:03.968] DML Start [2025-09-24 16:36:04.143] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:36:04.367] DML res1: 0 [2025-09-24 16:36:04.822] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:36:04.822] Read Success [2025-09-24 16:36:04.822] Verifying certificate... [2025-09-24 16:36:05.046] Verified OK [2025-09-24 16:36:05.061] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:36:06.815] Verified OK [2025-09-24 16:36:06.815] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:36:07.337] Verified OK [2025-09-24 16:36:07.337] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:36:09.893] fs.protected_hardlinks = 1 [2025-09-24 16:36:09.893] fs.protected_symlinks = 1 [2025-09-24 16:36:09.893] kernel.modules_disabled = 1 [2025-09-24 16:36:10.069] [2025-09-24 16:36:10.069] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:36:11.459] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:36:19.143] SBL1:1210.0.1.0 [2025-09-24 16:36:19.190] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:36:20.758] SBL2:1210.0.1.0 [2025-09-24 16:36:20.806] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:36:20.901] j-A [2025-09-24 16:36:28.255] The R5 Autosar Classic is running [2025-09-24 16:36:28.280] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:36:28.280] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:36:28.888] INIT: version 2.96 booting [2025-09-24 16:36:29.000] INIT: Entering runlevel: 5 [2025-09-24 16:36:29.144] mtd28 attached [2025-09-24 16:36:29.159] mtd24 attached [2025-09-24 16:36:29.191] ubi0:animations is mounted. [2025-09-24 16:36:29.207] mtd32 attached [2025-09-24 16:36:29.207] ubi1:textures is mounted. [2025-09-24 16:36:29.223] RTNETLINK answers: File exists [2025-09-24 16:36:29.284] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:36:29.284] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:36:29.284] ubi2:dml_code is mounted. [2025-09-24 16:36:29.284] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:36:29.284] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:36:29.284] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:36:29.284] data.LB_FadeInType0=100 [2025-09-24 16:36:29.284] data.CHLH_FadeInType0=0 [2025-09-24 16:36:29.284] data.WU_FadeInDelay=0 [2025-09-24 16:36:29.284] max_time_out=0 [2025-09-24 16:36:29.284] No splash screen [2025-09-24 16:36:29.284] stop dss Done [2025-09-24 16:36:29.364] /dev/mem opened. [2025-09-24 16:36:29.364] Memory mapped at address 0xffffa0264000. [2025-09-24 16:36:29.364] Read at address 0x00600018 (0xffffa0264018): 0x00000000 [2025-09-24 16:36:29.364] Write at address 0x00600018 (0xffffa0264018): 0x00400040, readback 0x00400040 [2025-09-24 16:36:29.364] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:36:29.364] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:36:29.617] Loaded PowerVR consumer services. [2025-09-24 16:36:29.617] Waiting data available... [2025-09-24 16:36:29.633] 512+0 records in [2025-09-24 16:36:29.633] 512+0 records out [2025-09-24 16:36:29.665] Starting syslogd/klogd: done [2025-09-24 16:36:29.680] DML Start [2025-09-24 16:36:29.825] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:36:30.048] DML res1: 0 [2025-09-24 16:36:30.480] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:36:30.496] Read Success [2025-09-24 16:36:30.496] Verifying certificate... [2025-09-24 16:36:30.768] Verified OK [2025-09-24 16:36:30.783] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:36:32.335] Verified OK [2025-09-24 16:36:32.335] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:36:32.952] Verified OK [2025-09-24 16:36:32.952] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:36:35.670] fs.protected_hardlinks = 1 [2025-09-24 16:36:35.686] fs.protected_symlinks = 1 [2025-09-24 16:36:35.686] kernel.modules_disabled = 1 [2025-09-24 16:36:35.878] [2025-09-24 16:36:35.878] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:36:37.115] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:36:44.856] SBL1:1210.0.1.0 [2025-09-24 16:36:44.904] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:36:46.471] SBL2:1210.0.1.0 [2025-09-24 16:36:46.519] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:36:46.614] j-A [2025-09-24 16:36:53.969] The R5 Autosar Classic is running [2025-09-24 16:36:53.994] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:36:53.994] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:36:54.601] INIT: version 2.96 booting [2025-09-24 16:36:54.713] INIT: Entering runlevel: 5 [2025-09-24 16:36:54.873] mtd32 attached [2025-09-24 16:36:54.873] mtd24 attached [2025-09-24 16:36:54.889] mtd28 attached [2025-09-24 16:36:54.937] RTNETLINK answers: File exists [2025-09-24 16:36:55.002] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:36:55.002] ubi0:dml_code is mounted. [2025-09-24 16:36:55.002] ubi2:animations is mounted. [2025-09-24 16:36:55.002] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:36:55.002] ubi1:textures is mounted. [2025-09-24 16:36:55.002] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:36:55.002] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:36:55.002] data.LB_FadeInType0=100 [2025-09-24 16:36:55.002] data.CHLH_FadeInType0=0 [2025-09-24 16:36:55.002] data.WU_FadeInDelay=0 [2025-09-24 16:36:55.002] max_time_out=0 [2025-09-24 16:36:55.002] No splash screen [2025-09-24 16:36:55.002] stop dss Done [2025-09-24 16:36:55.002] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:36:55.072] /dev/mem opened. [2025-09-24 16:36:55.072] Memory mapped at address 0xffffb29e9000. [2025-09-24 16:36:55.072] Read at address 0x00600018 (0xffffb29e9018): 0x00000000 [2025-09-24 16:36:55.072] Write at address 0x00600018 (0xffffb29e9018): 0x00400040, readback 0x00400040 [2025-09-24 16:36:55.072] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:36:55.072] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:36:55.231] Loaded PowerVR consumer services. [2025-09-24 16:36:55.327] Waiting data available... [2025-09-24 16:36:55.343] 512+0 records in [2025-09-24 16:36:55.343] 512+0 records out [2025-09-24 16:36:55.359] Starting syslogd/klogd: done [2025-09-24 16:36:55.391] DML Start [2025-09-24 16:36:55.551] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:36:55.759] DML res1: 0 [2025-09-24 16:36:56.229] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:36:56.229] Read Success [2025-09-24 16:36:56.229] Verifying certificate... [2025-09-24 16:36:56.485] Verified OK [2025-09-24 16:36:56.501] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:36:58.131] Verified OK [2025-09-24 16:36:58.131] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:36:58.690] Verified OK [2025-09-24 16:36:58.690] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:37:01.377] fs.protected_hardlinks = 1 [2025-09-24 16:37:01.393] fs.protected_symlinks = 1 [2025-09-24 16:37:01.393] kernel.modules_disabled = 1 [2025-09-24 16:37:01.600] [2025-09-24 16:37:01.600] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:37:02.827] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:37:10.574] SBL1:1210.0.1.0 [2025-09-24 16:37:10.622] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:37:12.205] SBL2:1210.0.1.0 [2025-09-24 16:37:12.237] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:37:12.348] j-A [2025-09-24 16:37:19.718] The R5 Autosar Classic is running [2025-09-24 16:37:19.718] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:37:19.718] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:37:20.326] INIT: version 2.96 booting [2025-09-24 16:37:20.437] INIT: Entering runlevel: 5 [2025-09-24 16:37:20.582] mtd24 attached [2025-09-24 16:37:20.598] mtd28 attached [2025-09-24 16:37:20.614] mtd32 attached [2025-09-24 16:37:20.646] ubi0:textures is mounted. [2025-09-24 16:37:20.661] ubi1:animations is mounted. [2025-09-24 16:37:20.716] ubi2:dml_code is mounted. [2025-09-24 16:37:20.716] RTNETLINK answers: File exists [2025-09-24 16:37:20.716] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:37:20.716] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:37:20.716] data.LB_FadeInType0=100 [2025-09-24 16:37:20.716] data.CHLH_FadeInType0=0 [2025-09-24 16:37:20.716] data.WU_FadeInDelay=0 [2025-09-24 16:37:20.716] max_time_out=0 [2025-09-24 16:37:20.716] No splash screen [2025-09-24 16:37:20.716] stop dss Done [2025-09-24 16:37:20.716] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:37:20.716] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:37:20.716] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:37:20.783] /dev/mem opened. [2025-09-24 16:37:20.783] Memory mapped at address 0xffffa0b66000. [2025-09-24 16:37:20.783] Read at address 0x00600018 (0xffffa0b66018): 0x00000000 [2025-09-24 16:37:20.783] Write at address 0x00600018 (0xffffa0b66018): 0x00400040, readback 0x00400040 [2025-09-24 16:37:20.832] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:37:20.848] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:37:20.927] Loaded PowerVR consumer services. [2025-09-24 16:37:21.068] Waiting data available... [2025-09-24 16:37:21.068] 512+0 records in [2025-09-24 16:37:21.068] 512+0 records out [2025-09-24 16:37:21.100] Starting syslogd/klogd: done [2025-09-24 16:37:21.116] DML Start [2025-09-24 16:37:21.276] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:37:21.500] DML res1: 0 [2025-09-24 16:37:22.038] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:37:22.038] Read Success [2025-09-24 16:37:22.038] Verifying certificate... [2025-09-24 16:37:22.262] Verified OK [2025-09-24 16:37:22.277] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:37:24.017] Verified OK [2025-09-24 16:37:24.017] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:37:24.592] Verified OK [2025-09-24 16:37:24.592] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:37:27.086] fs.protected_hardlinks = 1 [2025-09-24 16:37:27.086] fs.protected_symlinks = 1 [2025-09-24 16:37:27.102] kernel.modules_disabled = 1 [2025-09-24 16:37:27.277] [2025-09-24 16:37:27.277] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:37:28.642] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:37:36.291] SBL1:1210.0.1.0 [2025-09-24 16:37:36.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:37:37.905] SBL2:1210.0.1.0 [2025-09-24 16:37:37.937] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:37:38.049] j-A [2025-09-24 16:37:45.423] The R5 Autosar Classic is running [2025-09-24 16:37:45.423] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:37:45.423] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:37:46.031] INIT: version 2.96 booting [2025-09-24 16:37:46.142] INIT: Entering runlevel: 5 [2025-09-24 16:37:46.286] mtd24 attached [2025-09-24 16:37:46.302] mtd28 attached [2025-09-24 16:37:46.318] mtd32 attached [2025-09-24 16:37:46.334] ubi0:textures is mounted. [2025-09-24 16:37:46.416] ubi1:animations is mounted. [2025-09-24 16:37:46.416] RTNETLINK answers: File exists [2025-09-24 16:37:46.416] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:37:46.416] ubi2:dml_code is mounted. [2025-09-24 16:37:46.416] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:37:46.416] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:37:46.416] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:37:46.416] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:37:46.416] data.LB_FadeInType0=100 [2025-09-24 16:37:46.416] data.CHLH_FadeInType0=0 [2025-09-24 16:37:46.416] data.WU_FadeInDelay=0 [2025-09-24 16:37:46.416] max_time_out=0 [2025-09-24 16:37:46.416] No splash screen [2025-09-24 16:37:46.416] stop dss Done [2025-09-24 16:37:46.464] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:37:46.497] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:37:46.497] /dev/mem opened. [2025-09-24 16:37:46.497] Memory mapped at address 0xffff96e83000. [2025-09-24 16:37:46.497] Read at address 0x00600018 (0xffff96e83018): 0x00000000 [2025-09-24 16:37:46.497] Write at address 0x00600018 (0xffff96e83018): 0x00400040, readback 0x00400040 [2025-09-24 16:37:46.673] Loaded PowerVR consumer services. [2025-09-24 16:37:46.768] Waiting data available... [2025-09-24 16:37:46.784] 512+0 records in [2025-09-24 16:37:46.784] 512+0 records out [2025-09-24 16:37:46.816] Starting syslogd/klogd: done [2025-09-24 16:37:46.832] DML Start [2025-09-24 16:37:47.009] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:37:47.233] DML res1: 0 [2025-09-24 16:37:47.702] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:37:47.702] Read Success [2025-09-24 16:37:47.702] Verifying certificate... [2025-09-24 16:37:47.924] Verified OK [2025-09-24 16:37:47.956] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:37:49.651] Verified OK [2025-09-24 16:37:49.651] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:37:50.226] Verified OK [2025-09-24 16:37:50.226] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:37:52.801] fs.protected_hardlinks = 1 [2025-09-24 16:37:52.817] fs.protected_symlinks = 1 [2025-09-24 16:37:52.817] kernel.modules_disabled = 1 [2025-09-24 16:37:53.024] [2025-09-24 16:37:53.024] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:37:54.297] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:38:01.987] SBL1:1210.0.1.0 [2025-09-24 16:38:02.035] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:38:03.602] SBL2:1210.0.1.0 [2025-09-24 16:38:03.650] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:38:03.746] j-A [2025-09-24 16:38:11.098] The R5 Autosar Classic is running [2025-09-24 16:38:11.123] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:38:11.123] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:38:11.731] INIT: version 2.96 booting [2025-09-24 16:38:11.843] INIT: Entering runlevel: 5 [2025-09-24 16:38:12.003] mtd24 attached [2025-09-24 16:38:12.003] mtd28 attached [2025-09-24 16:38:12.019] mtd32 attached [2025-09-24 16:38:12.083] RTNETLINK answers: File exists [2025-09-24 16:38:12.083] ubi0:textures is mounted. [2025-09-24 16:38:12.135] ubi1:animations is mounted. [2025-09-24 16:38:12.135] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:38:12.135] ubi2:dml_code is mounted. [2025-09-24 16:38:12.135] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:38:12.135] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:38:12.135] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:38:12.135] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:38:12.135] data.LB_FadeInType0=100 [2025-09-24 16:38:12.135] data.CHLH_FadeInType0=0 [2025-09-24 16:38:12.135] data.WU_FadeInDelay=0 [2025-09-24 16:38:12.135] max_time_out=0 [2025-09-24 16:38:12.135] No splash screen [2025-09-24 16:38:12.135] stop dss Done [2025-09-24 16:38:12.205] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:38:12.205] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:38:12.205] /dev/mem opened. [2025-09-24 16:38:12.205] Memory mapped at address 0xffff8cf8e000. [2025-09-24 16:38:12.205] Read at address 0x00600018 (0xffff8cf8e018): 0x00000000 [2025-09-24 16:38:12.205] Write at address 0x00600018 (0xffff8cf8e018): 0x00400040, readback 0x00400040 [2025-09-24 16:38:12.474] Loaded PowerVR consumer services. [2025-09-24 16:38:12.474] Waiting data available... [2025-09-24 16:38:12.490] 512+0 records in [2025-09-24 16:38:12.490] 512+0 records out [2025-09-24 16:38:12.538] Starting syslogd/klogd: done [2025-09-24 16:38:12.554] DML Start [2025-09-24 16:38:12.731] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:38:12.938] DML res1: 0 [2025-09-24 16:38:13.427] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:38:13.427] Read Success [2025-09-24 16:38:13.427] Verifying certificate... [2025-09-24 16:38:13.682] Verified OK [2025-09-24 16:38:13.699] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:38:15.472] Verified OK [2025-09-24 16:38:15.472] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:38:15.983] Verified OK [2025-09-24 16:38:16.005] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:38:18.467] fs.protected_hardlinks = 1 [2025-09-24 16:38:18.483] fs.protected_symlinks = 1 [2025-09-24 16:38:18.483] kernel.modules_disabled = 1 [2025-09-24 16:38:18.674] [2025-09-24 16:38:18.674] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:38:19.982] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:38:27.719] SBL1:1210.0.1.0 [2025-09-24 16:38:27.751] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:38:29.333] SBL2:1210.0.1.0 [2025-09-24 16:38:29.365] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:38:29.478] j-A [2025-09-24 16:38:36.851] The R5 Autosar Classic is running [2025-09-24 16:38:36.851] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:38:36.851] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:38:37.459] INIT: version 2.96 booting [2025-09-24 16:38:37.570] INIT: Entering runlevel: 5 [2025-09-24 16:38:37.730] mtd28 attached [2025-09-24 16:38:37.730] mtd24 attached [2025-09-24 16:38:37.746] mtd32 attached [2025-09-24 16:38:37.778] ubi0:animations is mounted. [2025-09-24 16:38:37.818] RTNETLINK answers: File exists [2025-09-24 16:38:37.818] ubi1:textures is mounted. [2025-09-24 16:38:37.818] ubi2:dml_code is mounted. [2025-09-24 16:38:37.818] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:38:37.863] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:38:37.863] data.LB_FadeInType0=100 [2025-09-24 16:38:37.863] data.CHLH_FadeInType0=0 [2025-09-24 16:38:37.863] data.WU_FadeInDelay=0 [2025-09-24 16:38:37.863] max_time_out=0 [2025-09-24 16:38:37.863] No splash screen [2025-09-24 16:38:37.863] stop dss Done [2025-09-24 16:38:37.863] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:38:37.863] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:38:37.863] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:38:37.934] /dev/mem opened. [2025-09-24 16:38:37.934] Memory mapped at address 0xffff8ab96000. [2025-09-24 16:38:37.934] Read at address 0x00600018 (0xffff8ab96018): 0x00000000 [2025-09-24 16:38:37.934] Write at address 0x00600018 (0xffff8ab96018): 0x00400040, readback 0x00400040 [2025-09-24 16:38:37.934] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:38:37.950] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:38:38.014] Loaded PowerVR consumer services. [2025-09-24 16:38:38.205] Waiting data available... [2025-09-24 16:38:38.205] 512+0 records in [2025-09-24 16:38:38.205] 512+0 records out [2025-09-24 16:38:38.221] Starting syslogd/klogd: done [2025-09-24 16:38:38.237] DML Start [2025-09-24 16:38:38.428] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:38:38.700] DML res1: 0 [2025-09-24 16:38:39.025] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:38:39.025] Read Success [2025-09-24 16:38:39.025] Verifying certificate... [2025-09-24 16:38:39.280] Verified OK [2025-09-24 16:38:39.297] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:38:41.038] Verified OK [2025-09-24 16:38:41.038] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:38:41.630] Verified OK [2025-09-24 16:38:41.630] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:38:44.189] fs.protected_hardlinks = 1 [2025-09-24 16:38:44.189] fs.protected_symlinks = 1 [2025-09-24 16:38:44.205] kernel.modules_disabled = 1 [2025-09-24 16:38:44.396] [2025-09-24 16:38:44.396] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:38:45.746] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:38:53.434] SBL1:1210.0.1.0 [2025-09-24 16:38:53.482] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:38:55.049] SBL2:1210.0.1.0 [2025-09-24 16:38:55.096] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:38:55.193] j-A [2025-09-24 16:39:02.546] The R5 Autosar Classic is running [2025-09-24 16:39:02.569] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:39:02.569] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:39:03.177] INIT: version 2.96 booting [2025-09-24 16:39:03.289] INIT: Entering runlevel: 5 [2025-09-24 16:39:03.432] mtd28 attached [2025-09-24 16:39:03.448] mtd32 attached [2025-09-24 16:39:03.464] mtd24 attached [2025-09-24 16:39:03.480] ubi0:animations is mounted. [2025-09-24 16:39:03.512] RTNETLINK answers: File exists [2025-09-24 16:39:03.512] ubi1:dml_code is mounted. [2025-09-24 16:39:03.572] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:39:03.572] ubi2:textures is mounted. [2025-09-24 16:39:03.572] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:39:03.572] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:39:03.572] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:39:03.572] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:39:03.572] data.LB_FadeInType0=100 [2025-09-24 16:39:03.572] data.CHLH_FadeInType0=0 [2025-09-24 16:39:03.572] data.WU_FadeInDelay=0 [2025-09-24 16:39:03.572] max_time_out=0 [2025-09-24 16:39:03.572] No splash screen [2025-09-24 16:39:03.572] stop dss Done [2025-09-24 16:39:03.612] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:39:03.612] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:39:03.644] /dev/mem opened. [2025-09-24 16:39:03.644] Memory mapped at address 0xffffa568d000. [2025-09-24 16:39:03.644] Read at address 0x00600018 (0xffffa568d018): 0x00000000 [2025-09-24 16:39:03.644] Write at address 0x00600018 (0xffffa568d018): 0x00400040, readback 0x00400040 [2025-09-24 16:39:03.756] Loaded PowerVR consumer services. [2025-09-24 16:39:03.900] Waiting data available... [2025-09-24 16:39:03.916] 512+0 records in [2025-09-24 16:39:03.916] 512+0 records out [2025-09-24 16:39:03.932] Starting syslogd/klogd: done [2025-09-24 16:39:03.947] DML Start [2025-09-24 16:39:04.124] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:39:04.379] DML res1: 0 [2025-09-24 16:39:04.819] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:39:04.819] Read Success [2025-09-24 16:39:04.819] Verifying certificate... [2025-09-24 16:39:05.091] Verified OK [2025-09-24 16:39:05.106] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:39:06.976] Verified OK [2025-09-24 16:39:06.976] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:39:07.446] Verified OK [2025-09-24 16:39:07.446] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:39:09.764] fs.protected_hardlinks = 1 [2025-09-24 16:39:09.764] fs.protected_symlinks = 1 [2025-09-24 16:39:09.780] kernel.modules_disabled = 1 [2025-09-24 16:39:09.972] [2025-09-24 16:39:09.972] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:39:11.438] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:39:19.156] SBL1:1210.0.1.0 [2025-09-24 16:39:19.188] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:39:20.771] SBL2:1210.0.1.0 [2025-09-24 16:39:20.803] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:39:20.915] j-A [2025-09-24 16:39:28.288] The R5 Autosar Classic is running [2025-09-24 16:39:28.288] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:39:28.288] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:39:28.895] INIT: version 2.96 booting [2025-09-24 16:39:29.006] INIT: Entering runlevel: 5 [2025-09-24 16:39:29.151] mtd24 attached [2025-09-24 16:39:29.167] mtd32 attached [2025-09-24 16:39:29.183] mtd28 attached [2025-09-24 16:39:29.231] ubi0:textures is mounted. [2025-09-24 16:39:29.231] RTNETLINK answers: File exists [2025-09-24 16:39:29.291] ubi1:dml_code is mounted. [2025-09-24 16:39:29.291] ubi2:animations is mounted. [2025-09-24 16:39:29.291] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:39:29.291] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:39:29.291] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:39:29.291] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:39:29.292] data.LB_FadeInType0=100 [2025-09-24 16:39:29.292] data.CHLH_FadeInType0=0 [2025-09-24 16:39:29.292] data.WU_FadeInDelay=0 [2025-09-24 16:39:29.292] max_time_out=0 [2025-09-24 16:39:29.292] No splash screen [2025-09-24 16:39:29.292] stop dss Done [2025-09-24 16:39:29.292] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:39:29.362] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:39:29.362] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:39:29.362] /dev/mem opened. [2025-09-24 16:39:29.362] Memory mapped at address 0xffff87f7d000. [2025-09-24 16:39:29.362] Read at address 0x00600018 (0xffff87f7d018): 0x00000000 [2025-09-24 16:39:29.362] Write at address 0x00600018 (0xffff87f7d018): 0x00400040, readback 0x00400040 [2025-09-24 16:39:29.458] Loaded PowerVR consumer services. [2025-09-24 16:39:29.632] Waiting data available... [2025-09-24 16:39:29.632] 512+0 records in [2025-09-24 16:39:29.632] 512+0 records out [2025-09-24 16:39:29.648] Starting syslogd/klogd: done [2025-09-24 16:39:29.664] DML Start [2025-09-24 16:39:29.855] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:39:30.063] DML res1: 0 [2025-09-24 16:39:30.581] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:39:30.581] Read Success [2025-09-24 16:39:30.581] Verifying certificate... [2025-09-24 16:39:30.805] Verified OK [2025-09-24 16:39:30.821] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:39:32.484] Verified OK [2025-09-24 16:39:32.484] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:39:33.102] Verified OK [2025-09-24 16:39:33.102] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:39:35.676] fs.protected_hardlinks = 1 [2025-09-24 16:39:35.692] fs.protected_symlinks = 1 [2025-09-24 16:39:35.692] kernel.modules_disabled = 1 [2025-09-24 16:39:35.899] [2025-09-24 16:39:35.899] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:39:37.168] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:39:44.851] SBL1:1210.0.1.0 [2025-09-24 16:39:44.899] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:39:46.466] SBL2:1210.0.1.0 [2025-09-24 16:39:46.514] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:39:46.626] j-A [2025-09-24 16:39:53.964] The R5 Autosar Classic is running [2025-09-24 16:39:53.995] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:39:53.995] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:39:54.603] INIT: version 2.96 booting [2025-09-24 16:39:54.715] INIT: Entering runlevel: 5 [2025-09-24 16:39:54.875] mtd32 attached [2025-09-24 16:39:54.875] mtd24 attached [2025-09-24 16:39:54.890] mtd28 attached [2025-09-24 16:39:54.938] RTNETLINK answers: File exists [2025-09-24 16:39:54.938] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:39:54.979] ubi0:dml_code is mounted. [2025-09-24 16:39:54.979] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:39:54.979] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:39:54.979] ubi1:textures is mounted. [2025-09-24 16:39:54.979] ubi2:animations is mounted. [2025-09-24 16:39:54.979] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:39:54.979] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:39:54.979] data.LB_FadeInType0=100 [2025-09-24 16:39:55.000] data.CHLH_FadeInType0=0 [2025-09-24 16:39:55.000] data.WU_FadeInDelay=0 [2025-09-24 16:39:55.000] max_time_out=0 [2025-09-24 16:39:55.000] No splash screen [2025-09-24 16:39:55.000] stop dss Done [2025-09-24 16:39:55.048] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:39:55.082] /dev/mem opened. [2025-09-24 16:39:55.082] Memory mapped at address 0xffff82b9a000. [2025-09-24 16:39:55.082] Read at address 0x00600018 (0xffff82b9a018): 0x00000000 [2025-09-24 16:39:55.082] Write at address 0x00600018 (0xffff82b9a018): 0x00400040, readback 0x00400040 [2025-09-24 16:39:55.082] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:39:55.241] Loaded PowerVR consumer services. [2025-09-24 16:39:55.354] Waiting data available... [2025-09-24 16:39:55.369] 512+0 records in [2025-09-24 16:39:55.369] 512+0 records out [2025-09-24 16:39:55.401] Starting syslogd/klogd: done [2025-09-24 16:39:55.418] DML Start [2025-09-24 16:39:55.561] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:39:55.769] DML res1: 0 [2025-09-24 16:39:56.295] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:39:56.295] Read Success [2025-09-24 16:39:56.295] Verifying certificate... [2025-09-24 16:39:56.535] Verified OK [2025-09-24 16:39:56.551] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:39:58.228] Verified OK [2025-09-24 16:39:58.228] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:39:58.835] Verified OK [2025-09-24 16:39:58.835] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:40:01.394] fs.protected_hardlinks = 1 [2025-09-24 16:40:01.410] fs.protected_symlinks = 1 [2025-09-24 16:40:01.410] kernel.modules_disabled = 1 [2025-09-24 16:40:01.601] [2025-09-24 16:40:01.601] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:40:02.941] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:40:05.160] @SBL1:1210.0.1.0 [2025-09-24 16:40:10.610] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:40:12.177] SBL2:1210.0.1.0 [2025-09-24 16:40:12.225] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:40:12.321] j-A [2025-09-24 16:40:19.677] The R5 Autosar Classic is running [2025-09-24 16:40:19.698] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:40:19.698] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:40:20.306] INIT: version 2.96 booting [2025-09-24 16:40:20.418] INIT: Entering runlevel: 5 [2025-09-24 16:40:20.562] mtd24 attached [2025-09-24 16:40:20.578] mtd28 attached [2025-09-24 16:40:20.594] mtd32 attached [2025-09-24 16:40:20.610] ubi0:textures is mounted. [2025-09-24 16:40:20.692] RTNETLINK answers: File exists [2025-09-24 16:40:20.692] ubi1:animations is mounted. [2025-09-24 16:40:20.692] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:40:20.692] ubi2:dml_code is mounted. [2025-09-24 16:40:20.692] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:40:20.692] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:40:20.692] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:40:20.692] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:40:20.692] data.LB_FadeInType0=100 [2025-09-24 16:40:20.692] data.CHLH_FadeInType0=0 [2025-09-24 16:40:20.692] data.WU_FadeInDelay=0 [2025-09-24 16:40:20.692] max_time_out=0 [2025-09-24 16:40:20.692] No splash screen [2025-09-24 16:40:20.692] stop dss Done [2025-09-24 16:40:20.724] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:40:20.762] /dev/mem opened. [2025-09-24 16:40:20.762] Memory mapped at address 0xffff93ee8000. [2025-09-24 16:40:20.762] Read at address 0x00600018 (0xffff93ee8018): 0x00000000 [2025-09-24 16:40:20.762] Write at address 0x00600018 (0xffff93ee8018): 0x00400040, readback 0x00400040 [2025-09-24 16:40:20.762] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:40:20.891] Loaded PowerVR consumer services. [2025-09-24 16:40:21.018] Waiting data available... [2025-09-24 16:40:21.034] 512+0 records in [2025-09-24 16:40:21.034] 512+0 records out [2025-09-24 16:40:21.082] Starting syslogd/klogd: done [2025-09-24 16:40:21.098] DML Start [2025-09-24 16:40:21.290] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:40:21.497] DML res1: 0 [2025-09-24 16:40:21.954] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:40:21.954] Read Success [2025-09-24 16:40:21.954] Verifying certificate... [2025-09-24 16:40:22.242] Verified OK [2025-09-24 16:40:22.258] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:40:23.966] Verified OK [2025-09-24 16:40:23.966] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:40:24.542] Verified OK [2025-09-24 16:40:24.542] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:40:27.100] fs.protected_hardlinks = 1 [2025-09-24 16:40:27.100] fs.protected_symlinks = 1 [2025-09-24 16:40:27.115] kernel.modules_disabled = 1 [2025-09-24 16:40:27.308] [2025-09-24 16:40:27.308] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:40:28.567] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:40:36.266] SBL1:1210.0.1.0 [2025-09-24 16:40:36.313] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:40:37.880] SBL2:1210.0.1.0 [2025-09-24 16:40:37.928] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:40:38.025] j-A [2025-09-24 16:40:45.380] The R5 Autosar Classic is running [2025-09-24 16:40:45.400] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:40:45.400] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:40:46.008] INIT: version 2.96 booting [2025-09-24 16:40:46.119] INIT: Entering runlevel: 5 [2025-09-24 16:40:46.264] mtd24 attached [2025-09-24 16:40:46.280] mtd32 attached [2025-09-24 16:40:46.296] mtd28 attached [2025-09-24 16:40:46.378] ubi0:textures is mounted. [2025-09-24 16:40:46.378] RTNETLINK answers: File exists [2025-09-24 16:40:46.378] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:40:46.378] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:40:46.378] ubi2:animations is mounted. [2025-09-24 16:40:46.378] ubi1:dml_code is mounted. [2025-09-24 16:40:46.378] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:40:46.378] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:40:46.378] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:40:46.398] data.LB_FadeInType0=100 [2025-09-24 16:40:46.398] data.CHLH_FadeInType0=0 [2025-09-24 16:40:46.398] data.WU_FadeInDelay=0 [2025-09-24 16:40:46.398] max_time_out=0 [2025-09-24 16:40:46.398] No splash screen [2025-09-24 16:40:46.398] stop dss Done [2025-09-24 16:40:46.425] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:40:46.425] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:40:46.477] /dev/mem opened. [2025-09-24 16:40:46.477] Memory mapped at address 0xffffbb30f000. [2025-09-24 16:40:46.477] Read at address 0x00600018 (0xffffbb30f018): 0x00000000 [2025-09-24 16:40:46.477] Write at address 0x00600018 (0xffffbb30f018): 0x00400040, readback 0x00400040 [2025-09-24 16:40:46.589] Loaded PowerVR consumer services. [2025-09-24 16:40:46.733] Waiting data available... [2025-09-24 16:40:46.765] 512+0 records in [2025-09-24 16:40:46.765] 512+0 records out [2025-09-24 16:40:46.812] Starting syslogd/klogd: done [2025-09-24 16:40:46.829] DML Start [2025-09-24 16:40:47.005] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:40:47.261] DML res1: 0 [2025-09-24 16:40:47.628] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:40:47.628] Read Success [2025-09-24 16:40:47.644] Verifying certificate... [2025-09-24 16:40:47.900] Verified OK [2025-09-24 16:40:47.916] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:40:49.537] Verified OK [2025-09-24 16:40:49.537] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:40:50.155] Verified OK [2025-09-24 16:40:50.155] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:40:52.697] fs.protected_hardlinks = 1 [2025-09-24 16:40:52.713] fs.protected_symlinks = 1 [2025-09-24 16:40:52.729] kernel.modules_disabled = 1 [2025-09-24 16:40:52.920] [2025-09-24 16:40:52.920] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:40:54.343] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:41:01.977] SBL1:1210.0.1.0 [2025-09-24 16:41:02.025] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:41:03.592] SBL2:1210.0.1.0 [2025-09-24 16:41:03.639] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:41:03.735] j-A [2025-09-24 16:41:11.091] The R5 Autosar Classic is running [2025-09-24 16:41:11.113] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:41:11.113] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:41:11.721] INIT: version 2.96 booting [2025-09-24 16:41:11.832] INIT: Entering runlevel: 5 [2025-09-24 16:41:11.993] mtd32 attached [2025-09-24 16:41:12.009] mtd28 attached [2025-09-24 16:41:12.009] mtd24 attached [2025-09-24 16:41:12.057] ubi1:animations is mounted. [2025-09-24 16:41:12.057] RTNETLINK answers: File exists [2025-09-24 16:41:12.105] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:41:12.105] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:41:12.105] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:41:12.105] ubi2:textures is mounted. [2025-09-24 16:41:12.105] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:41:12.105] ubi0:dml_code is mounted. [2025-09-24 16:41:12.105] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:41:12.128] data.LB_FadeInType0=100 [2025-09-24 16:41:12.128] data.CHLH_FadeInType0=0 [2025-09-24 16:41:12.128] data.WU_FadeInDelay=0 [2025-09-24 16:41:12.128] max_time_out=0 [2025-09-24 16:41:12.128] No splash screen [2025-09-24 16:41:12.128] stop dss Done [2025-09-24 16:41:12.143] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:41:12.159] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:41:12.209] /dev/mem opened. [2025-09-24 16:41:12.209] Memory mapped at address 0xffff9f160000. [2025-09-24 16:41:12.209] Read at address 0x00600018 (0xffff9f160018): 0x00000000 [2025-09-24 16:41:12.209] Write at address 0x00600018 (0xffff9f160018): 0x00400040, readback 0x00400040 [2025-09-24 16:41:12.289] Loaded PowerVR consumer services. [2025-09-24 16:41:12.449] Waiting data available... [2025-09-24 16:41:12.465] 512+0 records in [2025-09-24 16:41:12.465] 512+0 records out [2025-09-24 16:41:12.513] Starting syslogd/klogd: done [2025-09-24 16:41:12.529] DML Start [2025-09-24 16:41:12.674] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:41:12.897] DML res1: 0 [2025-09-24 16:41:13.438] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:41:13.438] Read Success [2025-09-24 16:41:13.438] Verifying certificate... [2025-09-24 16:41:13.693] Verified OK [2025-09-24 16:41:13.709] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:41:15.420] Verified OK [2025-09-24 16:41:15.436] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:41:15.993] Verified OK [2025-09-24 16:41:15.993] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:41:18.374] fs.protected_hardlinks = 1 [2025-09-24 16:41:18.402] fs.protected_symlinks = 1 [2025-09-24 16:41:18.402] kernel.modules_disabled = 1 [2025-09-24 16:41:18.593] [2025-09-24 16:41:18.593] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:41:19.964] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:41:27.691] SBL1:1210.0.1.0 [2025-09-24 16:41:27.739] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:41:29.305] SBL2:1210.0.1.0 [2025-09-24 16:41:29.353] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:41:29.466] j-A [2025-09-24 16:41:36.805] The R5 Autosar Classic is running [2025-09-24 16:41:36.836] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:41:36.836] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:41:37.444] INIT: version 2.96 booting [2025-09-24 16:41:37.555] INIT: Entering runlevel: 5 [2025-09-24 16:41:37.699] mtd28 attached [2025-09-24 16:41:37.715] mtd24 attached [2025-09-24 16:41:37.731] mtd32 attached [2025-09-24 16:41:37.832] ubi0:animations is mounted. [2025-09-24 16:41:37.832] ubi1:textures is mounted. [2025-09-24 16:41:37.832] RTNETLINK answers: File exists [2025-09-24 16:41:37.832] ubi2:dml_code is mounted. [2025-09-24 16:41:37.832] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:41:37.832] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:41:37.832] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:41:37.832] data.LB_FadeInType0=100 [2025-09-24 16:41:37.832] data.CHLH_FadeInType0=0 [2025-09-24 16:41:37.832] data.WU_FadeInDelay=0 [2025-09-24 16:41:37.832] max_time_out=0 [2025-09-24 16:41:37.832] No splash screen [2025-09-24 16:41:37.832] stop dss Done [2025-09-24 16:41:37.832] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:41:37.832] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:41:37.901] /dev/mem opened. [2025-09-24 16:41:37.901] Memory mapped at address 0xffff8ad06000. [2025-09-24 16:41:37.901] Read at address 0x00600018 (0xffff8ad06018): 0x00000000 [2025-09-24 16:41:37.901] Write at address 0x00600018 (0xffff8ad06018): 0x00400040, readback 0x00400040 [2025-09-24 16:41:37.901] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:41:37.933] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:41:38.013] Loaded PowerVR consumer services. [2025-09-24 16:41:38.157] Waiting data available... [2025-09-24 16:41:38.173] 512+0 records in [2025-09-24 16:41:38.173] 512+0 records out [2025-09-24 16:41:38.221] Starting syslogd/klogd: done [2025-09-24 16:41:38.237] DML Start [2025-09-24 16:41:38.397] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:41:38.620] DML res1: 0 [2025-09-24 16:41:39.100] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:41:39.121] Read Success [2025-09-24 16:41:39.121] Verifying certificate... [2025-09-24 16:41:39.409] Verified OK [2025-09-24 16:41:39.441] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:41:41.207] Verified OK [2025-09-24 16:41:41.207] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:41:41.743] Verified OK [2025-09-24 16:41:41.743] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:41:44.125] fs.protected_hardlinks = 1 [2025-09-24 16:41:44.141] fs.protected_symlinks = 1 [2025-09-24 16:41:44.141] kernel.modules_disabled = 1 [2025-09-24 16:41:44.332] [2025-09-24 16:41:44.332] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:41:45.698] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:41:53.597] SBL1:1210.0.1.0 [2025-09-24 16:41:53.645] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:41:55.212] SBL2:1210.0.1.0 [2025-09-24 16:41:55.259] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:41:55.355] j-A [2025-09-24 16:42:02.709] The R5 Autosar Classic is running [2025-09-24 16:42:02.733] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:42:02.733] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:42:03.342] INIT: version 2.96 booting [2025-09-24 16:42:03.453] INIT: Entering runlevel: 5 [2025-09-24 16:42:03.613] mtd24 attached [2025-09-24 16:42:03.613] mtd28 attached [2025-09-24 16:42:03.661] mtd32 attached [2025-09-24 16:42:03.677] ubi1:animations is mounted. [2025-09-24 16:42:03.677] ubi0:textures is mounted. [2025-09-24 16:42:03.693] RTNETLINK answers: File exists [2025-09-24 16:42:03.693] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:42:03.721] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:42:03.721] ubi2:dml_code is mounted. [2025-09-24 16:42:03.721] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:42:03.721] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:42:03.755] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:42:03.755] data.LB_FadeInType0=100 [2025-09-24 16:42:03.755] data.CHLH_FadeInType0=0 [2025-09-24 16:42:03.755] data.WU_FadeInDelay=0 [2025-09-24 16:42:03.755] max_time_out=0 [2025-09-24 16:42:03.755] No splash screen [2025-09-24 16:42:03.755] stop dss Done [2025-09-24 16:42:03.843] /dev/mem opened. [2025-09-24 16:42:03.843] Memory mapped at address 0xffff91f79000. [2025-09-24 16:42:03.843] Read at address 0x00600018 (0xffff91f79018): 0x00000000 [2025-09-24 16:42:03.843] Write at address 0x00600018 (0xffff91f79018): 0x00400040, readback 0x00400040 [2025-09-24 16:42:03.843] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:42:03.843] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:42:03.971] Loaded PowerVR consumer services. [2025-09-24 16:42:04.083] Waiting data available... [2025-09-24 16:42:04.083] 512+0 records in [2025-09-24 16:42:04.098] 512+0 records out [2025-09-24 16:42:04.131] Starting syslogd/klogd: done [2025-09-24 16:42:04.147] DML Start [2025-09-24 16:42:04.354] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:42:04.578] DML res1: 0 [2025-09-24 16:42:04.974] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:42:04.974] Read Success [2025-09-24 16:42:04.974] Verifying certificate... [2025-09-24 16:42:05.246] Verified OK [2025-09-24 16:42:05.262] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:42:07.020] Verified OK [2025-09-24 16:42:07.020] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:42:07.608] Verified OK [2025-09-24 16:42:07.608] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:42:10.165] fs.protected_hardlinks = 1 [2025-09-24 16:42:10.181] fs.protected_symlinks = 1 [2025-09-24 16:42:10.181] kernel.modules_disabled = 1 [2025-09-24 16:42:10.389] [2025-09-24 16:42:10.389] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:42:11.645] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:42:19.284] SBL1:1210.0.1.0 [2025-09-24 16:42:19.332] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:42:20.899] SBL2:1210.0.1.0 [2025-09-24 16:42:20.947] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:42:21.059] j-A [2025-09-24 16:42:28.428] The R5 Autosar Classic is running [2025-09-24 16:42:28.428] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:42:28.428] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:42:29.035] INIT: version 2.96 booting [2025-09-24 16:42:29.147] INIT: Entering runlevel: 5 [2025-09-24 16:42:29.291] mtd24 attached [2025-09-24 16:42:29.307] mtd28 attached [2025-09-24 16:42:29.323] mtd32 attached [2025-09-24 16:42:29.355] ubi0:textures is mounted. [2025-09-24 16:42:29.371] RTNETLINK answers: File exists [2025-09-24 16:42:29.424] ubi2:dml_code is mounted. [2025-09-24 16:42:29.424] ubi1:animations is mounted. [2025-09-24 16:42:29.424] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:42:29.424] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:42:29.424] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:42:29.424] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:42:29.424] data.LB_FadeInType0=100 [2025-09-24 16:42:29.424] data.CHLH_FadeInType0=0 [2025-09-24 16:42:29.424] data.WU_FadeInDelay=0 [2025-09-24 16:42:29.424] max_time_out=0 [2025-09-24 16:42:29.424] No splash screen [2025-09-24 16:42:29.424] stop dss Done [2025-09-24 16:42:29.424] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:42:29.501] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:42:29.501] /dev/mem opened. [2025-09-24 16:42:29.501] Memory mapped at address 0xffffb1381000. [2025-09-24 16:42:29.501] Read at address 0x00600018 (0xffffb1381018): 0x00000000 [2025-09-24 16:42:29.501] Write at address 0x00600018 (0xffffb1381018): 0x00400040, readback 0x00400040 [2025-09-24 16:42:29.501] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:42:29.566] Loaded PowerVR consumer services. [2025-09-24 16:42:29.741] Waiting data available... [2025-09-24 16:42:29.773] 512+0 records in [2025-09-24 16:42:29.773] 512+0 records out [2025-09-24 16:42:29.789] Starting syslogd/klogd: done [2025-09-24 16:42:29.821] DML Start [2025-09-24 16:42:29.965] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:42:30.221] DML res1: 0 [2025-09-24 16:42:30.626] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:42:30.626] Read Success [2025-09-24 16:42:30.626] Verifying certificate... [2025-09-24 16:42:30.850] Verified OK [2025-09-24 16:42:30.866] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:42:32.639] Verified OK [2025-09-24 16:42:32.639] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:42:33.172] Verified OK [2025-09-24 16:42:33.172] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:42:35.714] fs.protected_hardlinks = 1 [2025-09-24 16:42:35.730] fs.protected_symlinks = 1 [2025-09-24 16:42:35.746] kernel.modules_disabled = 1 [2025-09-24 16:42:35.938] [2025-09-24 16:42:35.938] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:42:37.236] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:42:45.006] SBL1:1210.0.1.0 [2025-09-24 16:42:45.038] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:42:46.621] SBL2:1210.0.1.0 [2025-09-24 16:42:46.653] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:42:46.764] j-A [2025-09-24 16:42:54.140] The R5 Autosar Classic is running [2025-09-24 16:42:54.140] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:42:54.140] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:42:54.747] INIT: version 2.96 booting [2025-09-24 16:42:54.859] INIT: Entering runlevel: 5 [2025-09-24 16:42:55.002] mtd24 attached [2025-09-24 16:42:55.019] mtd28 attached [2025-09-24 16:42:55.035] mtd32 attached [2025-09-24 16:42:55.067] ubi1:animations is mounted. [2025-09-24 16:42:55.083] ubi0:textures is mounted. [2025-09-24 16:42:55.141] ubi2:dml_code is mounted. [2025-09-24 16:42:55.141] RTNETLINK answers: File exists [2025-09-24 16:42:55.141] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:42:55.141] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:42:55.141] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:42:55.141] data.LB_FadeInType0=100 [2025-09-24 16:42:55.141] data.CHLH_FadeInType0=0 [2025-09-24 16:42:55.141] data.WU_FadeInDelay=0 [2025-09-24 16:42:55.141] max_time_out=0 [2025-09-24 16:42:55.141] No splash screen [2025-09-24 16:42:55.141] stop dss Done [2025-09-24 16:42:55.141] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:42:55.141] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:42:55.214] /dev/mem opened. [2025-09-24 16:42:55.214] Memory mapped at address 0xffffb4f81000. [2025-09-24 16:42:55.214] Read at address 0x00600018 (0xffffb4f81018): 0x00000000 [2025-09-24 16:42:55.214] Write at address 0x00600018 (0xffffb4f81018): 0x00400040, readback 0x00400040 [2025-09-24 16:42:55.214] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:42:55.230] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:42:55.341] Loaded PowerVR consumer services. [2025-09-24 16:42:55.470] Waiting data available... [2025-09-24 16:42:55.486] 512+0 records in [2025-09-24 16:42:55.486] 512+0 records out [2025-09-24 16:42:55.534] Starting syslogd/klogd: done [2025-09-24 16:42:55.549] DML Start [2025-09-24 16:42:55.693] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:42:55.917] DML res1: 0 [2025-09-24 16:42:56.394] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:42:56.394] Read Success [2025-09-24 16:42:56.394] Verifying certificate... [2025-09-24 16:42:56.666] Verified OK [2025-09-24 16:42:56.698] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:42:58.464] Verified OK [2025-09-24 16:42:58.464] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:42:59.003] Verified OK [2025-09-24 16:42:59.003] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:43:01.386] fs.protected_hardlinks = 1 [2025-09-24 16:43:01.402] fs.protected_symlinks = 1 [2025-09-24 16:43:01.402] kernel.modules_disabled = 1 [2025-09-24 16:43:01.609] [2025-09-24 16:43:01.609] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:43:03.001] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:43:10.734] SBL1:1210.0.1.0 [2025-09-24 16:43:10.766] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:43:12.349] SBL2:1210.0.1.0 [2025-09-24 16:43:12.381] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:43:12.493] j-A [2025-09-24 16:43:19.863] The R5 Autosar Classic is running [2025-09-24 16:43:19.863] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:43:19.863] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:43:20.470] INIT: version 2.96 booting [2025-09-24 16:43:20.582] INIT: Entering runlevel: 5 [2025-09-24 16:43:20.726] mtd24 attached [2025-09-24 16:43:20.742] mtd32 attached [2025-09-24 16:43:20.758] mtd28 attached [2025-09-24 16:43:20.774] ubi0:textures is mounted. [2025-09-24 16:43:20.806] ubi1:dml_code is mounted. [2025-09-24 16:43:20.806] RTNETLINK answers: File exists [2025-09-24 16:43:20.806] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:43:20.859] ubi2:animations is mounted. [2025-09-24 16:43:20.859] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:43:20.859] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:43:20.859] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:43:20.859] data.LB_FadeInType0=100 [2025-09-24 16:43:20.859] data.CHLH_FadeInType0=0 [2025-09-24 16:43:20.859] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:43:20.859] data.WU_FadeInDelay=0 [2025-09-24 16:43:20.859] max_time_out=0 [2025-09-24 16:43:20.859] No splash screen [2025-09-24 16:43:20.859] stop dss Done [2025-09-24 16:43:20.907] /dev/mem opened. [2025-09-24 16:43:20.907] Memory mapped at address 0xffffa6eb7000. [2025-09-24 16:43:20.944] Read at address 0x00600018 (0xffffa6eb7018): 0x00000000 [2025-09-24 16:43:20.944] Write at address 0x00600018 (0xffffa6eb7018): 0x00400040, readback 0x00400040 [2025-09-24 16:43:20.944] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:43:20.944] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:43:21.056] Loaded PowerVR consumer services. [2025-09-24 16:43:21.215] Waiting data available... [2025-09-24 16:43:21.215] 512+0 records in [2025-09-24 16:43:21.215] 512+0 records out [2025-09-24 16:43:21.231] Starting syslogd/klogd: done [2025-09-24 16:43:21.247] DML Start [2025-09-24 16:43:21.438] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:43:21.678] DML res1: 0 [2025-09-24 16:43:22.125] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:43:22.125] Read Success [2025-09-24 16:43:22.125] Verifying certificate... [2025-09-24 16:43:22.413] Verified OK [2025-09-24 16:43:22.429] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:43:24.153] Verified OK [2025-09-24 16:43:24.153] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:43:24.817] Verified OK [2025-09-24 16:43:24.817] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:43:27.406] fs.protected_hardlinks = 1 [2025-09-24 16:43:27.422] fs.protected_symlinks = 1 [2025-09-24 16:43:27.422] kernel.modules_disabled = 1 [2025-09-24 16:43:27.630] [2025-09-24 16:43:27.630] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:43:28.716] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:43:36.435] SBL1:1210.0.1.0 [2025-09-24 16:43:36.483] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:43:38.050] SBL2:1210.0.1.0 [2025-09-24 16:43:38.099] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:43:38.210] j-A [2025-09-24 16:43:45.579] The R5 Autosar Classic is running [2025-09-24 16:43:45.579] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:43:45.579] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:43:46.186] INIT: version 2.96 booting [2025-09-24 16:43:46.298] INIT: Entering runlevel: 5 [2025-09-24 16:43:46.458] mtd28 attached [2025-09-24 16:43:46.458] mtd24 attached [2025-09-24 16:43:46.474] mtd32 attached [2025-09-24 16:43:46.506] ubi0:animations is mounted. [2025-09-24 16:43:46.522] RTNETLINK answers: File exists [2025-09-24 16:43:46.577] ubi1:textures is mounted. [2025-09-24 16:43:46.577] ubi2:dml_code is mounted. [2025-09-24 16:43:46.577] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:43:46.577] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:43:46.577] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:43:46.577] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:43:46.577] data.LB_FadeInType0=100 [2025-09-24 16:43:46.577] data.CHLH_FadeInType0=0 [2025-09-24 16:43:46.577] data.WU_FadeInDelay=0 [2025-09-24 16:43:46.577] max_time_out=0 [2025-09-24 16:43:46.577] No splash screen [2025-09-24 16:43:46.577] stop dss Done [2025-09-24 16:43:46.577] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:43:46.626] /dev/mem opened. [2025-09-24 16:43:46.626] Memory mapped at address 0xffff8307d000. [2025-09-24 16:43:46.665] Read at address 0x00600018 (0xffff8307d018): 0x00000000 [2025-09-24 16:43:46.665] Write at address 0x00600018 (0xffff8307d018): 0x00400040, readback 0x00400040 [2025-09-24 16:43:46.665] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:43:46.665] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:43:46.746] Loaded PowerVR consumer services. [2025-09-24 16:43:46.905] Waiting data available... [2025-09-24 16:43:46.921] 512+0 records in [2025-09-24 16:43:46.921] 512+0 records out [2025-09-24 16:43:46.969] Starting syslogd/klogd: done [2025-09-24 16:43:46.985] DML Start [2025-09-24 16:43:47.161] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:43:47.401] DML res1: 0 [2025-09-24 16:43:47.862] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:43:47.862] Read Success [2025-09-24 16:43:47.862] Verifying certificate... [2025-09-24 16:43:48.103] Verified OK [2025-09-24 16:43:48.119] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:43:49.745] Verified OK [2025-09-24 16:43:49.745] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:43:50.376] Verified OK [2025-09-24 16:43:50.376] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:43:52.998] fs.protected_hardlinks = 1 [2025-09-24 16:43:52.998] fs.protected_symlinks = 1 [2025-09-24 16:43:53.014] kernel.modules_disabled = 1 [2025-09-24 16:43:53.206] [2025-09-24 16:43:53.206] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:43:54.446] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:44:02.159] SBL1:1210.0.1.0 [2025-09-24 16:44:02.207] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:44:03.774] SBL2:1210.0.1.0 [2025-09-24 16:44:03.822] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:44:03.917] j-A [2025-09-24 16:44:11.271] The R5 Autosar Classic is running [2025-09-24 16:44:11.296] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:44:11.296] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:44:11.904] INIT: version 2.96 booting [2025-09-24 16:44:12.015] INIT: Entering runlevel: 5 [2025-09-24 16:44:12.176] mtd32 attached [2025-09-24 16:44:12.192] mtd24 attached [2025-09-24 16:44:12.208] mtd28 attached [2025-09-24 16:44:12.240] ubi0:dml_code is mounted. [2025-09-24 16:44:12.256] RTNETLINK answers: File exists [2025-09-24 16:44:12.256] ubi1:textures is mounted. [2025-09-24 16:44:12.289] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:44:12.289] ubi2:animations is mounted. [2025-09-24 16:44:12.289] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:44:12.289] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:44:12.289] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:44:12.316] data.LB_FadeInType0=100 [2025-09-24 16:44:12.316] data.CHLH_FadeInType0=0 [2025-09-24 16:44:12.316] data.WU_FadeInDelay=0 [2025-09-24 16:44:12.316] max_time_out=0 [2025-09-24 16:44:12.316] No splash screen [2025-09-24 16:44:12.316] stop dss Done [2025-09-24 16:44:12.316] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:44:12.363] /dev/mem opened. [2025-09-24 16:44:12.363] Memory mapped at address 0xffff8b0e3000. [2025-09-24 16:44:12.403] Read at address 0x00600018 (0xffff8b0e3018): 0x00000000 [2025-09-24 16:44:12.403] Write at address 0x00600018 (0xffff8b0e3018): 0x00400040, readback 0x00400040 [2025-09-24 16:44:12.403] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:44:12.403] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:44:12.483] Loaded PowerVR consumer services. [2025-09-24 16:44:12.628] Waiting data available... [2025-09-24 16:44:12.644] 512+0 records in [2025-09-24 16:44:12.644] 512+0 records out [2025-09-24 16:44:12.676] Starting syslogd/klogd: done [2025-09-24 16:44:12.692] DML Start [2025-09-24 16:44:12.899] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:44:13.123] DML res1: 0 [2025-09-24 16:44:13.550] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:44:13.550] Read Success [2025-09-24 16:44:13.550] Verifying certificate... [2025-09-24 16:44:13.790] Verified OK [2025-09-24 16:44:13.806] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:44:15.479] Verified OK [2025-09-24 16:44:15.479] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:44:16.132] Verified OK [2025-09-24 16:44:16.132] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:44:18.786] fs.protected_hardlinks = 1 [2025-09-24 16:44:18.802] fs.protected_symlinks = 1 [2025-09-24 16:44:18.802] kernel.modules_disabled = 1 [2025-09-24 16:44:18.993] [2025-09-24 16:44:18.993] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:44:20.177] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:44:27.868] SBL1:1210.0.1.0 [2025-09-24 16:44:27.916] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:44:29.483] SBL2:1210.0.1.0 [2025-09-24 16:44:29.514] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:44:29.626] j-A [2025-09-24 16:44:36.980] The R5 Autosar Classic is running [2025-09-24 16:44:36.980] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:44:37.001] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:44:37.608] INIT: version 2.96 booting [2025-09-24 16:44:37.721] INIT: Entering runlevel: 5 [2025-09-24 16:44:37.864] mtd24 attached [2025-09-24 16:44:37.880] mtd28 attached [2025-09-24 16:44:37.896] mtd32 attached [2025-09-24 16:44:37.912] ubi0:textures is mounted. [2025-09-24 16:44:37.944] ubi1:animations is mounted. [2025-09-24 16:44:37.944] RTNETLINK answers: File exists [2025-09-24 16:44:38.005] ubi2:dml_code is mounted. [2025-09-24 16:44:38.005] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:44:38.005] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:44:38.005] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:44:38.005] data.LB_FadeInType0=100 [2025-09-24 16:44:38.005] data.CHLH_FadeInType0=0 [2025-09-24 16:44:38.005] data.WU_FadeInDelay=0 [2025-09-24 16:44:38.005] max_time_out=0 [2025-09-24 16:44:38.005] No splash screen [2025-09-24 16:44:38.005] stop dss Done [2025-09-24 16:44:38.005] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:44:38.005] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:44:38.037] /dev/mem opened. [2025-09-24 16:44:38.037] Memory mapped at address 0xffffbafe3000. [2025-09-24 16:44:38.063] Read at address 0x00600018 (0xffffbafe3018): 0x00000000 [2025-09-24 16:44:38.063] Write at address 0x00600018 (0xffffbafe3018): 0x00400040, readback 0x00400040 [2025-09-24 16:44:38.079] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:44:38.095] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:44:38.303] Loaded PowerVR consumer services. [2025-09-24 16:44:38.335] Waiting data available... [2025-09-24 16:44:38.351] 512+0 records in [2025-09-24 16:44:38.351] 512+0 records out [2025-09-24 16:44:38.399] Starting syslogd/klogd: done [2025-09-24 16:44:38.415] DML Start [2025-09-24 16:44:38.575] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:44:38.815] DML res1: 0 [2025-09-24 16:44:39.273] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:44:39.273] Read Success [2025-09-24 16:44:39.273] Verifying certificate... [2025-09-24 16:44:39.513] Verified OK [2025-09-24 16:44:39.529] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:44:41.267] Verified OK [2025-09-24 16:44:41.267] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:44:41.900] Verified OK [2025-09-24 16:44:41.900] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:44:44.394] fs.protected_hardlinks = 1 [2025-09-24 16:44:44.410] fs.protected_symlinks = 1 [2025-09-24 16:44:44.410] kernel.modules_disabled = 1 [2025-09-24 16:44:44.601] [2025-09-24 16:44:44.601] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:44:45.839] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:44:53.567] SBL1:1210.0.1.0 [2025-09-24 16:44:53.615] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:44:55.182] SBL2:1210.0.1.0 [2025-09-24 16:44:55.230] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:44:55.325] j-A [2025-09-24 16:45:02.678] The R5 Autosar Classic is running [2025-09-24 16:45:02.703] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:45:02.703] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:45:03.327] INIT: version 2.96 booting [2025-09-24 16:45:03.423] INIT: Entering runlevel: 5 [2025-09-24 16:45:03.582] mtd28 attached [2025-09-24 16:45:03.598] mtd24 attached [2025-09-24 16:45:03.598] mtd32 attached [2025-09-24 16:45:03.646] ubi0:animations is mounted. [2025-09-24 16:45:03.715] RTNETLINK answers: File exists [2025-09-24 16:45:03.715] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:45:03.715] ubi2:dml_code is mounted. [2025-09-24 16:45:03.715] ubi1:textures is mounted. [2025-09-24 16:45:03.715] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:45:03.715] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:45:03.715] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:45:03.715] data.LB_FadeInType0=100 [2025-09-24 16:45:03.715] data.CHLH_FadeInType0=0 [2025-09-24 16:45:03.715] data.WU_FadeInDelay=0 [2025-09-24 16:45:03.715] max_time_out=0 [2025-09-24 16:45:03.715] No splash screen [2025-09-24 16:45:03.715] stop dss Done [2025-09-24 16:45:03.715] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:45:03.747] /dev/mem opened. [2025-09-24 16:45:03.747] Memory mapped at address 0xffffa26a1000. [2025-09-24 16:45:03.773] Read at address 0x00600018 (0xffffa26a1018): 0x00000000 [2025-09-24 16:45:03.773] Write at address 0x00600018 (0xffffa26a1018): 0x00400040, readback 0x00400040 [2025-09-24 16:45:03.821] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:45:03.837] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:45:04.029] Loaded PowerVR consumer services. [2025-09-24 16:45:04.068] 512+0 records in [2025-09-24 16:45:04.068] 512+0 records out [2025-09-24 16:45:04.068] Waiting data available... [2025-09-24 16:45:04.100] Starting syslogd/klogd: done [2025-09-24 16:45:04.116] DML Start [2025-09-24 16:45:04.276] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:45:04.500] DML res1: 0 [2025-09-24 16:45:04.953] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:45:04.953] Read Success [2025-09-24 16:45:04.953] Verifying certificate... [2025-09-24 16:45:05.208] Verified OK [2025-09-24 16:45:05.224] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:45:06.880] Verified OK [2025-09-24 16:45:06.880] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:45:07.488] Verified OK [2025-09-24 16:45:07.503] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:45:10.157] fs.protected_hardlinks = 1 [2025-09-24 16:45:10.173] fs.protected_symlinks = 1 [2025-09-24 16:45:10.173] kernel.modules_disabled = 1 [2025-09-24 16:45:10.397] [2025-09-24 16:45:10.397] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:45:11.563] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:45:19.266] SBL1:1210.0.1.0 [2025-09-24 16:45:19.314] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:45:20.881] SBL2:1210.0.1.0 [2025-09-24 16:45:20.929] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:45:21.041] j-A [2025-09-24 16:45:28.410] The R5 Autosar Classic is running [2025-09-24 16:45:28.410] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:45:28.410] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:45:29.018] INIT: version 2.96 booting [2025-09-24 16:45:29.130] INIT: Entering runlevel: 5 [2025-09-24 16:45:29.273] mtd24 attached [2025-09-24 16:45:29.289] mtd32 attached [2025-09-24 16:45:29.306] mtd28 attached [2025-09-24 16:45:29.407] RTNETLINK answers: File exists [2025-09-24 16:45:29.407] ubi1:dml_code is mounted. [2025-09-24 16:45:29.407] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:45:29.407] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:45:29.407] ubi0:textures is mounted. [2025-09-24 16:45:29.407] ubi2:animations is mounted. [2025-09-24 16:45:29.407] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:45:29.407] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:45:29.407] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:45:29.407] data.LB_FadeInType0=100 [2025-09-24 16:45:29.407] data.CHLH_FadeInType0=0 [2025-09-24 16:45:29.407] data.WU_FadeInDelay=0 [2025-09-24 16:45:29.407] max_time_out=0 [2025-09-24 16:45:29.407] No splash screen [2025-09-24 16:45:29.407] stop dss Done [2025-09-24 16:45:29.439] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:45:29.485] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:45:29.485] /dev/mem opened. [2025-09-24 16:45:29.485] Memory mapped at address 0xffffad845000. [2025-09-24 16:45:29.485] Read at address 0x00600018 (0xffffad845018): 0x00000000 [2025-09-24 16:45:29.485] Write at address 0x00600018 (0xffffad845018): 0x00400040, readback 0x00400040 [2025-09-24 16:45:29.581] Loaded PowerVR consumer services. [2025-09-24 16:45:29.725] Waiting data available... [2025-09-24 16:45:29.741] 512+0 records in [2025-09-24 16:45:29.741] 512+0 records out [2025-09-24 16:45:29.789] Starting syslogd/klogd: done [2025-09-24 16:45:29.805] DML Start [2025-09-24 16:45:29.965] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:45:30.172] DML res1: 0 [2025-09-24 16:45:30.651] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:45:30.673] Read Success [2025-09-24 16:45:30.673] Verifying certificate... [2025-09-24 16:45:30.912] Verified OK [2025-09-24 16:45:30.928] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:45:32.687] Verified OK [2025-09-24 16:45:32.687] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:45:33.295] Verified OK [2025-09-24 16:45:33.295] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:45:35.820] fs.protected_hardlinks = 1 [2025-09-24 16:45:35.820] fs.protected_symlinks = 1 [2025-09-24 16:45:35.836] kernel.modules_disabled = 1 [2025-09-24 16:45:36.029] [2025-09-24 16:45:36.029] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:45:37.241] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:45:44.967] SBL1:1210.0.1.0 [2025-09-24 16:45:45.015] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:45:46.581] SBL2:1210.0.1.0 [2025-09-24 16:45:46.629] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:45:46.726] j-A [2025-09-24 16:45:54.080] The R5 Autosar Classic is running [2025-09-24 16:45:54.080] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:45:54.101] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:45:54.709] INIT: version 2.96 booting [2025-09-24 16:45:54.820] INIT: Entering runlevel: 5 [2025-09-24 16:45:54.980] mtd32 attached [2025-09-24 16:45:54.980] mtd24 attached [2025-09-24 16:45:54.996] mtd28 attached [2025-09-24 16:45:55.044] RTNETLINK answers: File exists [2025-09-24 16:45:55.118] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:45:55.118] ubi0:dml_code is mounted. [2025-09-24 16:45:55.118] ubi1:textures is mounted. [2025-09-24 16:45:55.118] ubi2:animations is mounted. [2025-09-24 16:45:55.118] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:45:55.118] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:45:55.118] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:45:55.118] data.LB_FadeInType0=100 [2025-09-24 16:45:55.118] data.CHLH_FadeInType0=0 [2025-09-24 16:45:55.118] data.WU_FadeInDelay=0 [2025-09-24 16:45:55.118] max_time_out=0 [2025-09-24 16:45:55.118] No splash screen [2025-09-24 16:45:55.118] stop dss Done [2025-09-24 16:45:55.118] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:45:55.205] /dev/mem opened. [2025-09-24 16:45:55.205] Memory mapped at address 0xffffa224b000. [2025-09-24 16:45:55.205] Read at address 0x00600018 (0xffffa224b018): 0x00000000 [2025-09-24 16:45:55.205] Write at address 0x00600018 (0xffffa224b018): 0x00400040, readback 0x00400040 [2025-09-24 16:45:55.221] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:45:55.221] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:45:55.381] Loaded PowerVR consumer services. [2025-09-24 16:45:55.445] 512+0 records in [2025-09-24 16:45:55.445] 512+0 records out [2025-09-24 16:45:55.493] Waiting data available... [2025-09-24 16:45:55.493] Starting syslogd/klogd: done [2025-09-24 16:45:55.524] DML Start [2025-09-24 16:45:55.669] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:45:55.876] DML res1: 0 [2025-09-24 16:45:56.356] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:45:56.372] Read Success [2025-09-24 16:45:56.372] Verifying certificate... [2025-09-24 16:45:56.659] Verified OK [2025-09-24 16:45:56.692] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:45:58.331] Verified OK [2025-09-24 16:45:58.331] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:45:58.938] Verified OK [2025-09-24 16:45:58.960] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:46:01.485] fs.protected_hardlinks = 1 [2025-09-24 16:46:01.501] fs.protected_symlinks = 1 [2025-09-24 16:46:01.501] kernel.modules_disabled = 1 [2025-09-24 16:46:01.709] [2025-09-24 16:46:01.709] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:46:02.953] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:46:10.662] SBL1:1210.0.1.0 [2025-09-24 16:46:10.710] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:46:12.292] SBL2:1210.0.1.0 [2025-09-24 16:46:12.324] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:46:12.437] j-A [2025-09-24 16:46:19.807] The R5 Autosar Classic is running [2025-09-24 16:46:19.807] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:46:19.807] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:46:20.415] INIT: version 2.96 booting [2025-09-24 16:46:20.510] INIT: Entering runlevel: 5 [2025-09-24 16:46:20.670] mtd28 attached [2025-09-24 16:46:20.686] mtd32 attached [2025-09-24 16:46:20.686] mtd24 attached [2025-09-24 16:46:20.718] ubi0:animations is mounted. [2025-09-24 16:46:20.734] RTNETLINK answers: File exists [2025-09-24 16:46:20.800] ubi1:dml_code is mounted. [2025-09-24 16:46:20.800] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:46:20.800] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:46:20.800] ubi2:textures is mounted. [2025-09-24 16:46:20.800] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:46:20.800] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:46:20.800] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:46:20.800] data.LB_FadeInType0=100 [2025-09-24 16:46:20.800] data.CHLH_FadeInType0=0 [2025-09-24 16:46:20.800] data.WU_FadeInDelay=0 [2025-09-24 16:46:20.800] max_time_out=0 [2025-09-24 16:46:20.800] No splash screen [2025-09-24 16:46:20.800] stop dss Done [2025-09-24 16:46:20.832] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:46:20.848] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:46:20.885] /dev/mem opened. [2025-09-24 16:46:20.885] Memory mapped at address 0xffffa0465000. [2025-09-24 16:46:20.885] Read at address 0x00600018 (0xffffa0465018): 0x00000000 [2025-09-24 16:46:20.885] Write at address 0x00600018 (0xffffa0465018): 0x00400040, readback 0x00400040 [2025-09-24 16:46:21.093] Loaded PowerVR consumer services. [2025-09-24 16:46:21.140] Waiting data available... [2025-09-24 16:46:21.140] 512+0 records in [2025-09-24 16:46:21.140] 512+0 records out [2025-09-24 16:46:21.172] Starting syslogd/klogd: done [2025-09-24 16:46:21.188] DML Start [2025-09-24 16:46:21.380] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:46:21.604] DML res1: 0 [2025-09-24 16:46:22.019] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:46:22.019] Read Success [2025-09-24 16:46:22.019] Verifying certificate... [2025-09-24 16:46:22.275] Verified OK [2025-09-24 16:46:22.275] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:46:24.033] Verified OK [2025-09-24 16:46:24.033] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:46:24.566] Verified OK [2025-09-24 16:46:24.566] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:46:27.140] fs.protected_hardlinks = 1 [2025-09-24 16:46:27.156] fs.protected_symlinks = 1 [2025-09-24 16:46:27.156] kernel.modules_disabled = 1 [2025-09-24 16:46:27.347] [2025-09-24 16:46:27.347] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:46:28.650] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:46:36.375] SBL1:1210.0.1.0 [2025-09-24 16:46:36.423] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:46:37.990] SBL2:1210.0.1.0 [2025-09-24 16:46:38.038] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:46:38.134] j-A [2025-09-24 16:46:45.489] The R5 Autosar Classic is running [2025-09-24 16:46:45.513] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:46:45.513] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:46:46.120] INIT: version 2.96 booting [2025-09-24 16:46:46.232] INIT: Entering runlevel: 5 [2025-09-24 16:46:46.392] mtd28 attached [2025-09-24 16:46:46.392] mtd24 attached [2025-09-24 16:46:46.408] mtd32 attached [2025-09-24 16:46:46.440] ubi0:animations is mounted. [2025-09-24 16:46:46.456] ubi1:textures is mounted. [2025-09-24 16:46:46.520] RTNETLINK answers: File exists [2025-09-24 16:46:46.520] ubi2:dml_code is mounted. [2025-09-24 16:46:46.520] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:46:46.520] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:46:46.520] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:46:46.520] data.LB_FadeInType0=100 [2025-09-24 16:46:46.520] data.CHLH_FadeInType0=0 [2025-09-24 16:46:46.520] data.WU_FadeInDelay=0 [2025-09-24 16:46:46.520] max_time_out=0 [2025-09-24 16:46:46.520] No splash screen [2025-09-24 16:46:46.520] stop dss Done [2025-09-24 16:46:46.520] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:46:46.520] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:46:46.552] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:46:46.589] /dev/mem opened. [2025-09-24 16:46:46.589] Memory mapped at address 0xffffbdd62000. [2025-09-24 16:46:46.589] Read at address 0x00600018 (0xffffbdd62018): 0x00000000 [2025-09-24 16:46:46.589] Write at address 0x00600018 (0xffffbdd62018): 0x00400040, readback 0x00400040 [2025-09-24 16:46:46.589] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:46:46.717] Loaded PowerVR consumer services. [2025-09-24 16:46:46.845] Waiting data available... [2025-09-24 16:46:46.861] 512+0 records in [2025-09-24 16:46:46.861] 512+0 records out [2025-09-24 16:46:46.925] Starting syslogd/klogd: done [2025-09-24 16:46:46.941] DML Start [2025-09-24 16:46:47.181] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:46:47.421] DML res1: 0 [2025-09-24 16:46:47.675] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:46:47.675] Read Success [2025-09-24 16:46:47.675] Verifying certificate... [2025-09-24 16:46:47.932] Verified OK [2025-09-24 16:46:47.948] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:46:49.545] Verified OK [2025-09-24 16:46:49.545] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:46:50.067] Verified OK [2025-09-24 16:46:50.067] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:46:52.896] fs.protected_hardlinks = 1 [2025-09-24 16:46:52.912] fs.protected_symlinks = 1 [2025-09-24 16:46:52.912] kernel.modules_disabled = 1 [2025-09-24 16:46:53.104] [2025-09-24 16:46:53.104] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:46:54.431] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:47:02.091] SBL1:1210.0.1.0 [2025-09-24 16:47:02.123] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:47:03.706] SBL2:1210.0.1.0 [2025-09-24 16:47:03.738] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:47:03.849] j-A [2025-09-24 16:47:11.221] The R5 Autosar Classic is running [2025-09-24 16:47:11.221] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:47:11.221] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:47:11.828] INIT: version 2.96 booting [2025-09-24 16:47:11.941] INIT: Entering runlevel: 5 [2025-09-24 16:47:12.101] mtd24 attached [2025-09-24 16:47:12.117] mtd28 attached [2025-09-24 16:47:12.132] mtd32 attached [2025-09-24 16:47:12.148] ubi0:textures is mounted. [2025-09-24 16:47:12.164] RTNETLINK answers: File exists [2025-09-24 16:47:12.226] ubi1:animations is mounted. [2025-09-24 16:47:12.226] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:47:12.226] ubi2:dml_code is mounted. [2025-09-24 16:47:12.226] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:47:12.226] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:47:12.226] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:47:12.226] data.LB_FadeInType0=100 [2025-09-24 16:47:12.226] data.CHLH_FadeInType0=0 [2025-09-24 16:47:12.226] data.WU_FadeInDelay=0 [2025-09-24 16:47:12.226] max_time_out=0 [2025-09-24 16:47:12.226] No splash screen [2025-09-24 16:47:12.226] stop dss Done [2025-09-24 16:47:12.226] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:47:12.292] /dev/mem opened. [2025-09-24 16:47:12.292] Memory mapped at address 0xffffa9c82000. [2025-09-24 16:47:12.292] Read at address 0x00600018 (0xffffa9c82018): 0x00000000 [2025-09-24 16:47:12.292] Write at address 0x00600018 (0xffffa9c82018): 0x00400040, readback 0x00400040 [2025-09-24 16:47:12.292] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:47:12.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:47:12.549] Loaded PowerVR consumer services. [2025-09-24 16:47:12.564] Waiting data available... [2025-09-24 16:47:12.580] 512+0 records in [2025-09-24 16:47:12.580] 512+0 records out [2025-09-24 16:47:12.612] Starting syslogd/klogd: done [2025-09-24 16:47:12.644] DML Start [2025-09-24 16:47:12.789] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:47:13.012] DML res1: 0 [2025-09-24 16:47:13.524] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:47:13.545] Read Success [2025-09-24 16:47:13.545] Verifying certificate... [2025-09-24 16:47:13.753] Verified OK [2025-09-24 16:47:13.785] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:47:15.473] Verified OK [2025-09-24 16:47:15.473] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:47:16.033] Verified OK [2025-09-24 16:47:16.049] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:47:18.764] fs.protected_hardlinks = 1 [2025-09-24 16:47:18.764] fs.protected_symlinks = 1 [2025-09-24 16:47:18.764] kernel.modules_disabled = 1 [2025-09-24 16:47:18.939] [2025-09-24 16:47:18.939] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:47:20.098] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:47:27.799] SBL1:1210.0.1.0 [2025-09-24 16:47:27.847] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:47:29.414] SBL2:1210.0.1.0 [2025-09-24 16:47:29.462] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:47:29.558] j-A [2025-09-24 16:47:36.912] The R5 Autosar Classic is running [2025-09-24 16:47:36.933] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:47:36.933] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:47:37.541] INIT: version 2.96 booting [2025-09-24 16:47:37.652] INIT: Entering runlevel: 5 [2025-09-24 16:47:37.797] mtd28 attached [2025-09-24 16:47:37.813] mtd32 attached [2025-09-24 16:47:37.829] mtd24 attached [2025-09-24 16:47:37.845] ubi0:animations is mounted. [2025-09-24 16:47:37.877] RTNETLINK answers: File exists [2025-09-24 16:47:37.915] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:47:37.915] ubi1:dml_code is mounted. [2025-09-24 16:47:37.915] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:47:37.915] ubi2:textures is mounted. [2025-09-24 16:47:37.915] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:47:37.915] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:47:37.915] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:47:37.936] data.LB_FadeInType0=100 [2025-09-24 16:47:37.936] data.CHLH_FadeInType0=0 [2025-09-24 16:47:37.936] data.WU_FadeInDelay=0 [2025-09-24 16:47:37.936] max_time_out=0 [2025-09-24 16:47:37.936] No splash screen [2025-09-24 16:47:37.936] stop dss Done [2025-09-24 16:47:38.023] /dev/mem opened. [2025-09-24 16:47:38.023] Memory mapped at address 0xffff9f134000. [2025-09-24 16:47:38.023] Read at address 0x00600018 (0xffff9f134018): 0x00000000 [2025-09-24 16:47:38.023] Write at address 0x00600018 (0xffff9f134018): 0x00400040, readback 0x00400040 [2025-09-24 16:47:38.023] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:47:38.023] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:47:38.088] Loaded PowerVR consumer services. [2025-09-24 16:47:38.263] Waiting data available... [2025-09-24 16:47:38.279] 512+0 records in [2025-09-24 16:47:38.279] 512+0 records out [2025-09-24 16:47:38.311] Starting syslogd/klogd: done [2025-09-24 16:47:38.344] DML Start [2025-09-24 16:47:38.535] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:47:38.759] DML res1: 0 [2025-09-24 16:47:39.199] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:47:39.199] Read Success [2025-09-24 16:47:39.199] Verifying certificate... [2025-09-24 16:47:39.470] Verified OK [2025-09-24 16:47:39.486] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:47:41.213] Verified OK [2025-09-24 16:47:41.213] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:47:41.805] Verified OK [2025-09-24 16:47:41.805] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:47:44.347] fs.protected_hardlinks = 1 [2025-09-24 16:47:44.363] fs.protected_symlinks = 1 [2025-09-24 16:47:44.363] kernel.modules_disabled = 1 [2025-09-24 16:47:44.570] [2025-09-24 16:47:44.570] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:47:45.841] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:47:53.516] SBL1:1210.0.1.0 [2025-09-24 16:47:53.564] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:47:55.130] SBL2:1210.0.1.0 [2025-09-24 16:47:55.178] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:47:55.274] j-A [2025-09-24 16:48:02.629] The R5 Autosar Classic is running [2025-09-24 16:48:02.654] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:48:02.654] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:48:03.261] INIT: version 2.96 booting [2025-09-24 16:48:03.373] INIT: Entering runlevel: 5 [2025-09-24 16:48:03.517] mtd28 attached [2025-09-24 16:48:03.533] mtd24 attached [2025-09-24 16:48:03.549] mtd32 attached [2025-09-24 16:48:03.564] ubi0:animations is mounted. [2025-09-24 16:48:03.597] RTNETLINK answers: File exists [2025-09-24 16:48:03.597] ubi1:textures is mounted. [2025-09-24 16:48:03.634] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:48:03.634] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:48:03.634] ubi2:dml_code is mounted. [2025-09-24 16:48:03.634] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:48:03.634] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:48:03.634] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:48:03.634] data.LB_FadeInType0=100 [2025-09-24 16:48:03.654] data.CHLH_FadeInType0=0 [2025-09-24 16:48:03.654] data.WU_FadeInDelay=0 [2025-09-24 16:48:03.654] max_time_out=0 [2025-09-24 16:48:03.654] No splash screen [2025-09-24 16:48:03.654] stop dss Done [2025-09-24 16:48:03.686] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:48:03.686] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:48:03.725] /dev/mem opened. [2025-09-24 16:48:03.725] Memory mapped at address 0xffff86a4b000. [2025-09-24 16:48:03.725] Read at address 0x00600018 (0xffff86a4b018): 0x00000000 [2025-09-24 16:48:03.725] Write at address 0x00600018 (0xffff86a4b018): 0x00400040, readback 0x00400040 [2025-09-24 16:48:03.868] Loaded PowerVR consumer services. [2025-09-24 16:48:03.980] Waiting data available... [2025-09-24 16:48:03.996] 512+0 records in [2025-09-24 16:48:03.996] 512+0 records out [2025-09-24 16:48:04.045] Starting syslogd/klogd: done [2025-09-24 16:48:04.060] DML Start [2025-09-24 16:48:04.236] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:48:04.476] DML res1: 0 [2025-09-24 16:48:04.908] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:48:04.924] Read Success [2025-09-24 16:48:04.924] Verifying certificate... [2025-09-24 16:48:05.212] Verified OK [2025-09-24 16:48:05.244] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:48:07.009] Verified OK [2025-09-24 16:48:07.009] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:48:07.474] Verified OK [2025-09-24 16:48:07.474] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:48:09.931] fs.protected_hardlinks = 1 [2025-09-24 16:48:09.931] fs.protected_symlinks = 1 [2025-09-24 16:48:09.931] kernel.modules_disabled = 1 [2025-09-24 16:48:10.123] [2025-09-24 16:48:10.123] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:48:11.560] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:48:19.230] SBL1:1210.0.1.0 [2025-09-24 16:48:19.278] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:48:20.845] SBL2:1210.0.1.0 [2025-09-24 16:48:20.893] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:48:20.989] j-A [2025-09-24 16:48:28.343] The R5 Autosar Classic is running [2025-09-24 16:48:28.364] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:48:28.364] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:48:28.972] INIT: version 2.96 booting [2025-09-24 16:48:29.084] INIT: Entering runlevel: 5 [2025-09-24 16:48:29.228] mtd28 attached [2025-09-24 16:48:29.243] mtd32 attached [2025-09-24 16:48:29.259] mtd24 attached [2025-09-24 16:48:29.307] ubi0:animations is mounted. [2025-09-24 16:48:29.307] RTNETLINK answers: File exists [2025-09-24 16:48:29.345] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:48:29.345] ubi2:textures is mounted. [2025-09-24 16:48:29.345] ubi1:dml_code is mounted. [2025-09-24 16:48:29.345] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:48:29.345] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:48:29.345] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:48:29.345] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:48:29.345] data.LB_FadeInType0=100 [2025-09-24 16:48:29.366] data.CHLH_FadeInType0=0 [2025-09-24 16:48:29.366] data.WU_FadeInDelay=0 [2025-09-24 16:48:29.366] max_time_out=0 [2025-09-24 16:48:29.366] No splash screen [2025-09-24 16:48:29.366] stop dss Done [2025-09-24 16:48:29.399] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:48:29.414] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:48:29.414] /dev/mem opened. [2025-09-24 16:48:29.446] Memory mapped at address 0xffffa2132000. [2025-09-24 16:48:29.446] Read at address 0x00600018 (0xffffa2132018): 0x00000000 [2025-09-24 16:48:29.446] Write at address 0x00600018 (0xffffa2132018): 0x00400040, readback 0x00400040 [2025-09-24 16:48:29.542] Loaded PowerVR consumer services. [2025-09-24 16:48:29.702] Waiting data available... [2025-09-24 16:48:29.718] 512+0 records in [2025-09-24 16:48:29.718] 512+0 records out [2025-09-24 16:48:29.750] Starting syslogd/klogd: done [2025-09-24 16:48:29.782] DML Start [2025-09-24 16:48:29.942] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:48:30.166] DML res1: 0 [2025-09-24 16:48:30.614] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:48:30.630] Read Success [2025-09-24 16:48:30.630] Verifying certificate... [2025-09-24 16:48:30.853] Verified OK [2025-09-24 16:48:30.885] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:48:32.548] Verified OK [2025-09-24 16:48:32.548] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:48:33.197] Verified OK [2025-09-24 16:48:33.197] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:48:35.771] fs.protected_hardlinks = 1 [2025-09-24 16:48:35.787] fs.protected_symlinks = 1 [2025-09-24 16:48:35.787] kernel.modules_disabled = 1 [2025-09-24 16:48:35.995] [2025-09-24 16:48:35.995] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:48:37.207] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:48:44.930] SBL1:1210.0.1.0 [2025-09-24 16:48:44.978] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:48:46.544] SBL2:1210.0.1.0 [2025-09-24 16:48:46.592] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:48:46.688] j-A [2025-09-24 16:48:54.043] The R5 Autosar Classic is running [2025-09-24 16:48:54.065] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:48:54.065] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:48:54.673] INIT: version 2.96 booting [2025-09-24 16:48:54.785] INIT: Entering runlevel: 5 [2025-09-24 16:48:54.929] mtd24 attached [2025-09-24 16:48:54.945] mtd28 attached [2025-09-24 16:48:54.961] mtd32 attached [2025-09-24 16:48:55.061] RTNETLINK answers: File exists [2025-09-24 16:48:55.061] ubi0:textures is mounted. [2025-09-24 16:48:55.061] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:48:55.061] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:48:55.061] ubi1:animations is mounted. [2025-09-24 16:48:55.061] ubi2:dml_code is mounted. [2025-09-24 16:48:55.061] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:48:55.062] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:48:55.062] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:48:55.062] data.LB_FadeInType0=100 [2025-09-24 16:48:55.062] data.CHLH_FadeInType0=0 [2025-09-24 16:48:55.062] data.WU_FadeInDelay=0 [2025-09-24 16:48:55.062] max_time_out=0 [2025-09-24 16:48:55.062] No splash screen [2025-09-24 16:48:55.062] stop dss Done [2025-09-24 16:48:55.156] /dev/mem opened. [2025-09-24 16:48:55.156] Memory mapped at address 0xffff822ef000. [2025-09-24 16:48:55.156] Read at address 0x00600018 (0xffff822ef018): 0x00000000 [2025-09-24 16:48:55.156] Write at address 0x00600018 (0xffff822ef018): 0x00400040, readback 0x00400040 [2025-09-24 16:48:55.156] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:48:55.156] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:48:55.411] Loaded PowerVR consumer services. [2025-09-24 16:48:55.411] Waiting data available... [2025-09-24 16:48:55.426] 512+0 records in [2025-09-24 16:48:55.426] 512+0 records out [2025-09-24 16:48:55.458] Starting syslogd/klogd: done [2025-09-24 16:48:55.474] DML Start [2025-09-24 16:48:55.650] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:48:55.890] DML res1: 0 [2025-09-24 16:48:56.239] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:48:56.239] Read Success [2025-09-24 16:48:56.239] Verifying certificate... [2025-09-24 16:48:56.478] Verified OK [2025-09-24 16:48:56.494] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:48:58.093] Verified OK [2025-09-24 16:48:58.093] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:48:58.738] Verified OK [2025-09-24 16:48:58.738] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:49:01.456] fs.protected_hardlinks = 1 [2025-09-24 16:49:01.472] fs.protected_symlinks = 1 [2025-09-24 16:49:01.472] kernel.modules_disabled = 1 [2025-09-24 16:49:01.648] [2025-09-24 16:49:01.648] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:49:02.979] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:49:10.659] SBL1:1210.0.1.0 [2025-09-24 16:49:10.690] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:49:12.273] SBL2:1210.0.1.0 [2025-09-24 16:49:12.304] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:49:12.417] j-A [2025-09-24 16:49:19.790] The R5 Autosar Classic is running [2025-09-24 16:49:19.790] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:49:19.790] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:49:20.398] INIT: version 2.96 booting [2025-09-24 16:49:20.510] INIT: Entering runlevel: 5 [2025-09-24 16:49:20.654] mtd24 attached [2025-09-24 16:49:20.670] mtd28 attached [2025-09-24 16:49:20.686] mtd32 attached [2025-09-24 16:49:20.733] ubi0:textures is mounted. [2025-09-24 16:49:20.733] RTNETLINK answers: File exists [2025-09-24 16:49:20.796] ubi1:animations is mounted. [2025-09-24 16:49:20.796] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:49:20.796] ubi2:dml_code is mounted. [2025-09-24 16:49:20.796] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:49:20.796] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:49:20.796] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:49:20.796] data.LB_FadeInType0=100 [2025-09-24 16:49:20.796] data.CHLH_FadeInType0=0 [2025-09-24 16:49:20.796] data.WU_FadeInDelay=0 [2025-09-24 16:49:20.796] max_time_out=0 [2025-09-24 16:49:20.796] No splash screen [2025-09-24 16:49:20.796] stop dss Done [2025-09-24 16:49:20.796] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:49:20.860] /dev/mem opened. [2025-09-24 16:49:20.860] Memory mapped at address 0xffffb77fc000. [2025-09-24 16:49:20.886] Read at address 0x00600018 (0xffffb77fc018): 0x00000000 [2025-09-24 16:49:20.886] Write at address 0x00600018 (0xffffb77fc018): 0x00400040, readback 0x00400040 [2025-09-24 16:49:20.902] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:49:20.902] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:49:21.013] Loaded PowerVR consumer services. [2025-09-24 16:49:21.142] Waiting data available... [2025-09-24 16:49:21.158] 512+0 records in [2025-09-24 16:49:21.158] 512+0 records out [2025-09-24 16:49:21.205] Starting syslogd/klogd: done [2025-09-24 16:49:21.221] DML Start [2025-09-24 16:49:21.397] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:49:21.605] DML res1: 0 [2025-09-24 16:49:22.028] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:49:22.028] Read Success [2025-09-24 16:49:22.028] Verifying certificate... [2025-09-24 16:49:22.268] Verified OK [2025-09-24 16:49:22.283] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:49:23.959] Verified OK [2025-09-24 16:49:23.959] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:49:24.536] Verified OK [2025-09-24 16:49:24.536] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:49:27.285] fs.protected_hardlinks = 1 [2025-09-24 16:49:27.301] fs.protected_symlinks = 1 [2025-09-24 16:49:27.301] kernel.modules_disabled = 1 [2025-09-24 16:49:27.493] [2025-09-24 16:49:27.493] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:49:28.707] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:49:36.381] SBL1:1210.0.1.0 [2025-09-24 16:49:36.429] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:49:37.996] SBL2:1210.0.1.0 [2025-09-24 16:49:38.044] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:49:38.140] j-A [2025-09-24 16:49:45.493] The R5 Autosar Classic is running [2025-09-24 16:49:45.515] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:49:45.515] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:49:46.122] INIT: version 2.96 booting [2025-09-24 16:49:46.235] INIT: Entering runlevel: 5 [2025-09-24 16:49:46.378] mtd28 attached [2025-09-24 16:49:46.394] mtd24 attached [2025-09-24 16:49:46.410] mtd32 attached [2025-09-24 16:49:46.442] ubi0:animations is mounted. [2025-09-24 16:49:46.490] RTNETLINK answers: File exists [2025-09-24 16:49:46.490] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:49:46.490] ubi1:textures is mounted. [2025-09-24 16:49:46.490] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:49:46.490] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:49:46.490] ubi2:dml_code is mounted. [2025-09-24 16:49:46.490] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:49:46.490] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:49:46.517] data.LB_FadeInType0=100 [2025-09-24 16:49:46.517] data.CHLH_FadeInType0=0 [2025-09-24 16:49:46.517] data.WU_FadeInDelay=0 [2025-09-24 16:49:46.517] max_time_out=0 [2025-09-24 16:49:46.517] No splash screen [2025-09-24 16:49:46.517] stop dss Done [2025-09-24 16:49:46.566] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:49:46.582] /dev/mem opened. [2025-09-24 16:49:46.582] Memory mapped at address 0xffffa4075000. [2025-09-24 16:49:46.614] Read at address 0x00600018 (0xffffa4075018): 0x00000000 [2025-09-24 16:49:46.614] Write at address 0x00600018 (0xffffa4075018): 0x00400040, readback 0x00400040 [2025-09-24 16:49:46.614] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:49:46.789] Loaded PowerVR consumer services. [2025-09-24 16:49:46.853] Waiting data available... [2025-09-24 16:49:46.869] 512+0 records in [2025-09-24 16:49:46.869] 512+0 records out [2025-09-24 16:49:46.916] Starting syslogd/klogd: done [2025-09-24 16:49:46.932] DML Start [2025-09-24 16:49:47.093] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:49:47.316] DML res1: 0 [2025-09-24 16:49:47.836] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:49:47.836] Read Success [2025-09-24 16:49:47.836] Verifying certificate... [2025-09-24 16:49:48.108] Verified OK [2025-09-24 16:49:48.124] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:49:49.803] Verified OK [2025-09-24 16:49:49.803] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:49:50.328] Verified OK [2025-09-24 16:49:50.328] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:49:52.981] fs.protected_hardlinks = 1 [2025-09-24 16:49:52.981] fs.protected_symlinks = 1 [2025-09-24 16:49:52.997] kernel.modules_disabled = 1 [2025-09-24 16:49:53.174] [2025-09-24 16:49:53.174] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:49:54.364] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:50:02.090] SBL1:1210.0.1.0 [2025-09-24 16:50:02.138] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:50:03.704] SBL2:1210.0.1.0 [2025-09-24 16:50:03.752] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:50:03.864] j-A [2025-09-24 16:50:11.233] The R5 Autosar Classic is running [2025-09-24 16:50:11.233] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:50:11.233] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:50:11.839] INIT: version 2.96 booting [2025-09-24 16:50:11.952] INIT: Entering runlevel: 5 [2025-09-24 16:50:12.111] mtd24 attached [2025-09-24 16:50:12.111] mtd28 attached [2025-09-24 16:50:12.127] mtd32 attached [2025-09-24 16:50:12.175] ubi0:textures is mounted. [2025-09-24 16:50:12.175] RTNETLINK answers: File exists [2025-09-24 16:50:12.209] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:50:12.209] ubi1:animations is mounted. [2025-09-24 16:50:12.209] ubi2:dml_code is mounted. [2025-09-24 16:50:12.209] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:50:12.209] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:50:12.244] data.LB_FadeInType0=100 [2025-09-24 16:50:12.244] data.CHLH_FadeInType0=0 [2025-09-24 16:50:12.244] data.WU_FadeInDelay=0 [2025-09-24 16:50:12.244] max_time_out=0 [2025-09-24 16:50:12.244] No splash screen [2025-09-24 16:50:12.244] stop dss Done [2025-09-24 16:50:12.244] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:50:12.244] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:50:12.317] /dev/mem opened. [2025-09-24 16:50:12.317] Memory mapped at address 0xffffbb99c000. [2025-09-24 16:50:12.317] Read at address 0x00600018 (0xffffbb99c018): 0x00000000 [2025-09-24 16:50:12.317] Write at address 0x00600018 (0xffffbb99c018): 0x00400040, readback 0x00400040 [2025-09-24 16:50:12.349] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:50:12.379] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:50:12.523] Loaded PowerVR consumer services. [2025-09-24 16:50:12.571] Waiting data available... [2025-09-24 16:50:12.587] 512+0 records in [2025-09-24 16:50:12.587] 512+0 records out [2025-09-24 16:50:12.603] Starting syslogd/klogd: done [2025-09-24 16:50:12.635] DML Start [2025-09-24 16:50:12.811] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:50:13.019] DML res1: 0 [2025-09-24 16:50:13.418] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:50:13.434] Read Success [2025-09-24 16:50:13.434] Verifying certificate... [2025-09-24 16:50:13.658] Verified OK [2025-09-24 16:50:13.674] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:50:15.376] Verified OK [2025-09-24 16:50:15.376] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:50:16.038] Verified OK [2025-09-24 16:50:16.038] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:50:18.689] fs.protected_hardlinks = 1 [2025-09-24 16:50:18.689] fs.protected_symlinks = 1 [2025-09-24 16:50:18.689] kernel.modules_disabled = 1 [2025-09-24 16:50:18.866] [2025-09-24 16:50:18.866] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:50:20.043] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:50:27.852] SBL1:1210.0.1.0 [2025-09-24 16:50:27.900] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:50:29.467] SBL2:1210.0.1.0 [2025-09-24 16:50:29.515] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:50:29.611] j-A [2025-09-24 16:50:36.963] The R5 Autosar Classic is running [2025-09-24 16:50:36.986] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:50:36.986] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:50:37.594] INIT: version 2.96 booting [2025-09-24 16:50:37.706] INIT: Entering runlevel: 5 [2025-09-24 16:50:37.866] mtd24 attached [2025-09-24 16:50:37.866] mtd28 attached [2025-09-24 16:50:37.898] ubi0:textures is mounted. [2025-09-24 16:50:37.914] ubi1:animations is mounted. [2025-09-24 16:50:37.914] mtd32 attached [2025-09-24 16:50:37.930] RTNETLINK answers: File exists [2025-09-24 16:50:37.971] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:50:37.971] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:50:37.971] ubi2:dml_code is mounted. [2025-09-24 16:50:37.971] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:50:37.971] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:50:37.971] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:50:37.992] data.LB_FadeInType0=100 [2025-09-24 16:50:37.992] data.CHLH_FadeInType0=0 [2025-09-24 16:50:37.992] data.WU_FadeInDelay=0 [2025-09-24 16:50:37.992] max_time_out=0 [2025-09-24 16:50:37.992] No splash screen [2025-09-24 16:50:37.992] stop dss Done [2025-09-24 16:50:38.023] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:50:38.066] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:50:38.066] /dev/mem opened. [2025-09-24 16:50:38.066] Memory mapped at address 0xffff9043b000. [2025-09-24 16:50:38.066] Read at address 0x00600018 (0xffff9043b018): 0x00000000 [2025-09-24 16:50:38.066] Write at address 0x00600018 (0xffff9043b018): 0x00400040, readback 0x00400040 [2025-09-24 16:50:38.179] Loaded PowerVR consumer services. [2025-09-24 16:50:38.351] Waiting data available... [2025-09-24 16:50:38.351] 512+0 records in [2025-09-24 16:50:38.351] 512+0 records out [2025-09-24 16:50:38.383] Starting syslogd/klogd: done [2025-09-24 16:50:38.399] DML Start [2025-09-24 16:50:38.591] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:50:38.815] DML res1: 0 [2025-09-24 16:50:39.215] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:50:39.235] Read Success [2025-09-24 16:50:39.235] Verifying certificate... [2025-09-24 16:50:39.476] Verified OK [2025-09-24 16:50:39.476] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:50:41.233] Verified OK [2025-09-24 16:50:41.233] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:50:41.893] Verified OK [2025-09-24 16:50:41.893] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:50:44.436] fs.protected_hardlinks = 1 [2025-09-24 16:50:44.451] fs.protected_symlinks = 1 [2025-09-24 16:50:44.451] kernel.modules_disabled = 1 [2025-09-24 16:50:44.643] [2025-09-24 16:50:44.643] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:50:45.891] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:50:53.549] SBL1:1210.0.1.0 [2025-09-24 16:50:53.597] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:50:55.164] SBL2:1210.0.1.0 [2025-09-24 16:50:55.212] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:50:55.324] j-A [2025-09-24 16:51:02.693] The R5 Autosar Classic is running [2025-09-24 16:51:02.693] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:51:02.693] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:51:03.301] INIT: version 2.96 booting [2025-09-24 16:51:03.413] INIT: Entering runlevel: 5 [2025-09-24 16:51:03.573] mtd28 attached [2025-09-24 16:51:03.573] mtd24 attached [2025-09-24 16:51:03.589] mtd32 attached [2025-09-24 16:51:03.621] ubi0:animations is mounted. [2025-09-24 16:51:03.637] RTNETLINK answers: File exists [2025-09-24 16:51:03.637] ubi1:textures is mounted. [2025-09-24 16:51:03.671] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:51:03.671] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:51:03.671] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:51:03.671] ubi2:dml_code is mounted. [2025-09-24 16:51:03.671] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:51:03.671] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:51:03.687] data.LB_FadeInType0=100 [2025-09-24 16:51:03.708] data.CHLH_FadeInType0=0 [2025-09-24 16:51:03.708] data.WU_FadeInDelay=0 [2025-09-24 16:51:03.708] max_time_out=0 [2025-09-24 16:51:03.708] No splash screen [2025-09-24 16:51:03.708] stop dss Done [2025-09-24 16:51:03.735] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:51:03.735] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:51:03.784] /dev/mem opened. [2025-09-24 16:51:03.784] Memory mapped at address 0xffffbaa75000. [2025-09-24 16:51:03.784] Read at address 0x00600018 (0xffffbaa75018): 0x00000000 [2025-09-24 16:51:03.784] Write at address 0x00600018 (0xffffbaa75018): 0x00400040, readback 0x00400040 [2025-09-24 16:51:04.008] Loaded PowerVR consumer services. [2025-09-24 16:51:04.024] Waiting data available... [2025-09-24 16:51:04.040] 512+0 records in [2025-09-24 16:51:04.056] 512+0 records out [2025-09-24 16:51:04.072] Starting syslogd/klogd: done [2025-09-24 16:51:04.088] DML Start [2025-09-24 16:51:04.264] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:51:04.519] DML res1: 0 [2025-09-24 16:51:04.903] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:51:04.925] Read Success [2025-09-24 16:51:04.925] Verifying certificate... [2025-09-24 16:51:05.165] Verified OK [2025-09-24 16:51:05.181] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:51:06.808] Verified OK [2025-09-24 16:51:06.808] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:51:07.456] Verified OK [2025-09-24 16:51:07.456] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:51:10.029] fs.protected_hardlinks = 1 [2025-09-24 16:51:10.029] fs.protected_symlinks = 1 [2025-09-24 16:51:10.045] kernel.modules_disabled = 1 [2025-09-24 16:51:10.238] [2025-09-24 16:51:10.238] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:51:11.620] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:51:19.281] SBL1:1210.0.1.0 [2025-09-24 16:51:19.328] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:51:20.895] SBL2:1210.0.1.0 [2025-09-24 16:51:20.943] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:51:21.039] j-A [2025-09-24 16:51:28.393] The R5 Autosar Classic is running [2025-09-24 16:51:28.414] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:51:28.414] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:51:29.021] INIT: version 2.96 booting [2025-09-24 16:51:29.133] INIT: Entering runlevel: 5 [2025-09-24 16:51:29.293] mtd24 attached [2025-09-24 16:51:29.293] mtd32 attached [2025-09-24 16:51:29.308] mtd28 attached [2025-09-24 16:51:29.324] ubi0:textures is mounted. [2025-09-24 16:51:29.357] RTNETLINK answers: File exists [2025-09-24 16:51:29.413] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:51:29.413] ubi1:dml_code is mounted. [2025-09-24 16:51:29.413] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:51:29.413] ubi2:animations is mounted. [2025-09-24 16:51:29.413] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:51:29.413] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:51:29.413] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:51:29.413] data.LB_FadeInType0=100 [2025-09-24 16:51:29.413] data.CHLH_FadeInType0=0 [2025-09-24 16:51:29.413] data.WU_FadeInDelay=0 [2025-09-24 16:51:29.413] max_time_out=0 [2025-09-24 16:51:29.413] No splash screen [2025-09-24 16:51:29.413] stop dss Done [2025-09-24 16:51:29.503] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:51:29.503] /dev/mem opened. [2025-09-24 16:51:29.503] Memory mapped at address 0xffff9a8a9000. [2025-09-24 16:51:29.503] Read at address 0x00600018 (0xffff9a8a9018): 0x00000000 [2025-09-24 16:51:29.503] Write at address 0x00600018 (0xffff9a8a9018): 0x00400040, readback 0x00400040 [2025-09-24 16:51:29.503] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:51:29.584] Loaded PowerVR consumer services. [2025-09-24 16:51:29.758] Waiting data available... [2025-09-24 16:51:29.758] 512+0 records in [2025-09-24 16:51:29.758] 512+0 records out [2025-09-24 16:51:29.790] Starting syslogd/klogd: done [2025-09-24 16:51:29.806] DML Start [2025-09-24 16:51:29.966] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:51:30.206] DML res1: 0 [2025-09-24 16:51:30.662] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:51:30.662] Read Success [2025-09-24 16:51:30.662] Verifying certificate... [2025-09-24 16:51:30.901] Verified OK [2025-09-24 16:51:30.917] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:51:32.575] Verified OK [2025-09-24 16:51:32.575] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:51:33.259] Verified OK [2025-09-24 16:51:33.259] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:51:35.914] fs.protected_hardlinks = 1 [2025-09-24 16:51:35.929] fs.protected_symlinks = 1 [2025-09-24 16:51:35.929] kernel.modules_disabled = 1 [2025-09-24 16:51:36.105] [2025-09-24 16:51:36.105] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:51:37.301] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:51:45.005] SBL1:1210.0.1.0 [2025-09-24 16:51:45.037] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:51:46.620] SBL2:1210.0.1.0 [2025-09-24 16:51:46.652] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:51:46.764] j-A [2025-09-24 16:51:54.137] The R5 Autosar Classic is running [2025-09-24 16:51:54.137] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:51:54.137] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:51:54.745] INIT: version 2.96 booting [2025-09-24 16:51:54.856] INIT: Entering runlevel: 5 [2025-09-24 16:51:55.016] mtd32 attached [2025-09-24 16:51:55.016] mtd28 attached [2025-09-24 16:51:55.032] mtd24 attached [2025-09-24 16:51:55.080] RTNETLINK answers: File exists [2025-09-24 16:51:55.080] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:51:55.124] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:51:55.124] ubi1:animations is mounted. [2025-09-24 16:51:55.124] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:51:55.124] ubi0:dml_code is mounted. [2025-09-24 16:51:55.124] ubi2:textures is mounted. [2025-09-24 16:51:55.124] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:51:55.124] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:51:55.146] data.LB_FadeInType0=100 [2025-09-24 16:51:55.146] data.CHLH_FadeInType0=0 [2025-09-24 16:51:55.146] data.WU_FadeInDelay=0 [2025-09-24 16:51:55.146] max_time_out=0 [2025-09-24 16:51:55.146] No splash screen [2025-09-24 16:51:55.146] stop dss Done [2025-09-24 16:51:55.178] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:51:55.194] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:51:55.210] /dev/mem opened. [2025-09-24 16:51:55.210] Memory mapped at address 0xffffaa0c9000. [2025-09-24 16:51:55.236] Read at address 0x00600018 (0xffffaa0c9018): 0x00000000 [2025-09-24 16:51:55.236] Write at address 0x00600018 (0xffffaa0c9018): 0x00400040, readback 0x00400040 [2025-09-24 16:51:55.316] Loaded PowerVR consumer services. [2025-09-24 16:51:55.476] Waiting data available... [2025-09-24 16:51:55.492] 512+0 records in [2025-09-24 16:51:55.492] 512+0 records out [2025-09-24 16:51:55.540] Starting syslogd/klogd: done [2025-09-24 16:51:55.555] DML Start [2025-09-24 16:51:55.700] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:51:55.939] DML res1: 0 [2025-09-24 16:51:56.410] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:51:56.410] Read Success [2025-09-24 16:51:56.410] Verifying certificate... [2025-09-24 16:51:56.635] Verified OK [2025-09-24 16:51:56.667] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:51:58.313] Verified OK [2025-09-24 16:51:58.313] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:51:58.980] Verified OK [2025-09-24 16:51:58.980] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:52:01.602] fs.protected_hardlinks = 1 [2025-09-24 16:52:01.618] fs.protected_symlinks = 1 [2025-09-24 16:52:01.618] kernel.modules_disabled = 1 [2025-09-24 16:52:01.811] [2025-09-24 16:52:01.811] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:52:02.983] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:52:10.706] SBL1:1210.0.1.0 [2025-09-24 16:52:10.738] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:52:12.321] SBL2:1210.0.1.0 [2025-09-24 16:52:12.353] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:52:12.465] j-A [2025-09-24 16:52:19.839] The R5 Autosar Classic is running [2025-09-24 16:52:19.839] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:52:19.839] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:52:20.447] INIT: version 2.96 booting [2025-09-24 16:52:20.558] INIT: Entering runlevel: 5 [2025-09-24 16:52:20.718] mtd32 attached [2025-09-24 16:52:20.718] mtd24 attached [2025-09-24 16:52:20.734] mtd28 attached [2025-09-24 16:52:20.783] RTNETLINK answers: File exists [2025-09-24 16:52:20.783] ubi0:dml_code is mounted. [2025-09-24 16:52:20.842] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:52:20.842] ubi1:textures is mounted. [2025-09-24 16:52:20.842] ubi2:animations is mounted. [2025-09-24 16:52:20.842] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:52:20.842] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:52:20.842] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:52:20.842] data.LB_FadeInType0=100 [2025-09-24 16:52:20.842] data.CHLH_FadeInType0=0 [2025-09-24 16:52:20.842] data.WU_FadeInDelay=0 [2025-09-24 16:52:20.842] max_time_out=0 [2025-09-24 16:52:20.842] No splash screen [2025-09-24 16:52:20.842] stop dss Done [2025-09-24 16:52:20.842] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:52:20.923] /dev/mem opened. [2025-09-24 16:52:20.923] Memory mapped at address 0xffffa6520000. [2025-09-24 16:52:20.923] Read at address 0x00600018 (0xffffa6520018): 0x00000000 [2025-09-24 16:52:20.923] Write at address 0x00600018 (0xffffa6520018): 0x00400040, readback 0x00400040 [2025-09-24 16:52:20.923] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:52:20.939] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:52:21.115] Loaded PowerVR consumer services. [2025-09-24 16:52:21.211] Waiting data available... [2025-09-24 16:52:21.226] 512+0 records in [2025-09-24 16:52:21.226] 512+0 records out [2025-09-24 16:52:21.258] Starting syslogd/klogd: done [2025-09-24 16:52:21.274] DML Start [2025-09-24 16:52:21.435] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:52:21.658] DML res1: 0 [2025-09-24 16:52:22.103] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:52:22.103] Read Success [2025-09-24 16:52:22.103] Verifying certificate... [2025-09-24 16:52:22.342] Verified OK [2025-09-24 16:52:22.358] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:52:24.031] Verified OK [2025-09-24 16:52:24.031] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:52:24.696] Verified OK [2025-09-24 16:52:24.696] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:52:27.350] fs.protected_hardlinks = 1 [2025-09-24 16:52:27.350] fs.protected_symlinks = 1 [2025-09-24 16:52:27.365] kernel.modules_disabled = 1 [2025-09-24 16:52:27.558] [2025-09-24 16:52:27.558] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:52:28.698] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:52:36.417] SBL1:1210.0.1.0 [2025-09-24 16:52:36.465] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:52:38.032] SBL2:1210.0.1.0 [2025-09-24 16:52:38.080] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:52:38.176] j-A [2025-09-24 16:52:45.531] The R5 Autosar Classic is running [2025-09-24 16:52:45.554] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:52:45.554] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:52:46.162] INIT: version 2.96 booting [2025-09-24 16:52:46.273] INIT: Entering runlevel: 5 [2025-09-24 16:52:46.433] mtd24 attached [2025-09-24 16:52:46.433] mtd28 attached [2025-09-24 16:52:46.465] mtd32 attached [2025-09-24 16:52:46.465] ubi0:textures is mounted. [2025-09-24 16:52:46.497] RTNETLINK answers: File exists [2025-09-24 16:52:46.497] ubi1:animations is mounted. [2025-09-24 16:52:46.556] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:52:46.556] ubi2:dml_code is mounted. [2025-09-24 16:52:46.556] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:52:46.556] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:52:46.556] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:52:46.556] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:52:46.556] data.LB_FadeInType0=100 [2025-09-24 16:52:46.556] data.CHLH_FadeInType0=0 [2025-09-24 16:52:46.556] data.WU_FadeInDelay=0 [2025-09-24 16:52:46.556] max_time_out=0 [2025-09-24 16:52:46.556] No splash screen [2025-09-24 16:52:46.556] stop dss Done [2025-09-24 16:52:46.604] /dev/mem opened. [2025-09-24 16:52:46.604] Memory mapped at address 0xffffb7457000. [2025-09-24 16:52:46.630] Read at address 0x00600018 (0xffffb7457018): 0x00000000 [2025-09-24 16:52:46.630] Write at address 0x00600018 (0xffffb7457018): 0x00400040, readback 0x00400040 [2025-09-24 16:52:46.630] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:52:46.645] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:52:46.822] Loaded PowerVR consumer services. [2025-09-24 16:52:46.918] Waiting data available... [2025-09-24 16:52:46.934] 512+0 records in [2025-09-24 16:52:46.934] 512+0 records out [2025-09-24 16:52:46.982] Starting syslogd/klogd: done [2025-09-24 16:52:46.998] DML Start [2025-09-24 16:52:47.141] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:52:47.398] DML res1: 0 [2025-09-24 16:52:47.886] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:52:47.886] Read Success [2025-09-24 16:52:47.886] Verifying certificate... [2025-09-24 16:52:48.110] Verified OK [2025-09-24 16:52:48.126] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:52:49.606] Verified OK [2025-09-24 16:52:49.606] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:52:50.230] Verified OK [2025-09-24 16:52:50.230] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:52:52.948] fs.protected_hardlinks = 1 [2025-09-24 16:52:52.964] fs.protected_symlinks = 1 [2025-09-24 16:52:52.964] kernel.modules_disabled = 1 [2025-09-24 16:52:53.171] [2025-09-24 16:52:53.171] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:52:54.476] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:53:02.122] SBL1:1210.0.1.0 [2025-09-24 16:53:02.170] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:53:03.736] SBL2:1210.0.1.0 [2025-09-24 16:53:03.784] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:53:03.897] j-A [2025-09-24 16:53:11.234] The R5 Autosar Classic is running [2025-09-24 16:53:11.265] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:53:11.265] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:53:11.873] INIT: version 2.96 booting [2025-09-24 16:53:11.985] INIT: Entering runlevel: 5 [2025-09-24 16:53:12.129] mtd28 attached [2025-09-24 16:53:12.145] mtd24 attached [2025-09-24 16:53:12.162] mtd32 attached [2025-09-24 16:53:12.178] ubi0:animations is mounted. [2025-09-24 16:53:12.209] RTNETLINK answers: File exists [2025-09-24 16:53:12.209] ubi1:textures is mounted. [2025-09-24 16:53:12.265] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:53:12.265] ubi2:dml_code is mounted. [2025-09-24 16:53:12.265] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:53:12.265] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:53:12.265] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:53:12.265] data.LB_FadeInType0=100 [2025-09-24 16:53:12.265] data.CHLH_FadeInType0=0 [2025-09-24 16:53:12.265] data.WU_FadeInDelay=0 [2025-09-24 16:53:12.265] max_time_out=0 [2025-09-24 16:53:12.265] No splash screen [2025-09-24 16:53:12.265] stop dss Done [2025-09-24 16:53:12.265] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:53:12.297] /dev/mem opened. [2025-09-24 16:53:12.329] Memory mapped at address 0xffff808f7000. [2025-09-24 16:53:12.329] Read at address 0x00600018 (0xffff808f7018): 0x00000000 [2025-09-24 16:53:12.329] Write at address 0x00600018 (0xffff808f7018): 0x00400040, readback 0x00400040 [2025-09-24 16:53:12.329] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:53:12.361] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:53:12.553] Loaded PowerVR consumer services. [2025-09-24 16:53:12.644] Waiting data available... [2025-09-24 16:53:12.644] 512+0 records in [2025-09-24 16:53:12.644] 512+0 records out [2025-09-24 16:53:12.660] Starting syslogd/klogd: done [2025-09-24 16:53:12.676] DML Start [2025-09-24 16:53:12.852] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:53:13.091] DML res1: 0 [2025-09-24 16:53:13.514] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:53:13.514] Read Success [2025-09-24 16:53:13.514] Verifying certificate... [2025-09-24 16:53:13.739] Verified OK [2025-09-24 16:53:13.754] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:53:15.359] Verified OK [2025-09-24 16:53:15.359] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:53:15.982] Verified OK [2025-09-24 16:53:15.982] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:53:18.620] fs.protected_hardlinks = 1 [2025-09-24 16:53:18.636] fs.protected_symlinks = 1 [2025-09-24 16:53:18.636] kernel.modules_disabled = 1 [2025-09-24 16:53:18.828] [2025-09-24 16:53:18.828] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:53:20.145] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:53:27.858] SBL1:1210.0.1.0 [2025-09-24 16:53:27.906] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:53:29.473] SBL2:1210.0.1.0 [2025-09-24 16:53:29.521] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:53:29.616] j-A [2025-09-24 16:53:36.971] The R5 Autosar Classic is running [2025-09-24 16:53:36.993] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:53:36.993] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:53:37.600] INIT: version 2.96 booting [2025-09-24 16:53:37.713] INIT: Entering runlevel: 5 [2025-09-24 16:53:37.873] mtd28 attached [2025-09-24 16:53:37.873] mtd24 attached [2025-09-24 16:53:37.889] mtd32 attached [2025-09-24 16:53:37.993] RTNETLINK answers: File exists [2025-09-24 16:53:37.993] ubi1:textures is mounted. [2025-09-24 16:53:37.993] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:53:37.993] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:53:37.993] ubi0:animations is mounted. [2025-09-24 16:53:37.993] ubi2:dml_code is mounted. [2025-09-24 16:53:37.993] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:53:37.993] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:53:37.993] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:53:37.993] data.LB_FadeInType0=100 [2025-09-24 16:53:37.993] data.CHLH_FadeInType0=0 [2025-09-24 16:53:37.993] data.WU_FadeInDelay=0 [2025-09-24 16:53:37.993] max_time_out=0 [2025-09-24 16:53:37.993] No splash screen [2025-09-24 16:53:37.993] stop dss Done [2025-09-24 16:53:38.025] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:53:38.041] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:53:38.083] /dev/mem opened. [2025-09-24 16:53:38.083] Memory mapped at address 0xffff85323000. [2025-09-24 16:53:38.083] Read at address 0x00600018 (0xffff85323018): 0x00000000 [2025-09-24 16:53:38.083] Write at address 0x00600018 (0xffff85323018): 0x00400040, readback 0x00400040 [2025-09-24 16:53:38.147] Loaded PowerVR consumer services. [2025-09-24 16:53:38.339] Waiting data available... [2025-09-24 16:53:38.355] 512+0 records in [2025-09-24 16:53:38.355] 512+0 records out [2025-09-24 16:53:38.387] Starting syslogd/klogd: done [2025-09-24 16:53:38.403] DML Start [2025-09-24 16:53:38.578] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:53:38.802] DML res1: 0 [2025-09-24 16:53:39.224] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:53:39.224] Read Success [2025-09-24 16:53:39.224] Verifying certificate... [2025-09-24 16:53:39.512] Verified OK [2025-09-24 16:53:39.528] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:53:41.223] Verified OK [2025-09-24 16:53:41.223] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:53:41.838] Verified OK [2025-09-24 16:53:41.838] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:53:44.379] fs.protected_hardlinks = 1 [2025-09-24 16:53:44.395] fs.protected_symlinks = 1 [2025-09-24 16:53:44.395] kernel.modules_disabled = 1 [2025-09-24 16:53:44.571] [2025-09-24 16:53:44.571] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:53:45.844] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:53:53.588] SBL1:1210.0.1.0 [2025-09-24 16:53:53.636] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:53:55.203] SBL2:1210.0.1.0 [2025-09-24 16:53:55.251] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:53:55.346] j-A [2025-09-24 16:54:02.701] The R5 Autosar Classic is running [2025-09-24 16:54:02.726] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:54:02.726] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:54:03.333] INIT: version 2.96 booting [2025-09-24 16:54:03.445] INIT: Entering runlevel: 5 [2025-09-24 16:54:03.589] mtd32 attached [2025-09-24 16:54:03.605] mtd28 attached [2025-09-24 16:54:03.621] mtd24 attached [2025-09-24 16:54:03.670] ubi0:dml_code is mounted. [2025-09-24 16:54:03.670] RTNETLINK answers: File exists [2025-09-24 16:54:03.725] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:54:03.725] ubi1:animations is mounted. [2025-09-24 16:54:03.725] ubi2:textures is mounted. [2025-09-24 16:54:03.725] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:54:03.725] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:54:03.725] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:54:03.725] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:54:03.725] data.LB_FadeInType0=100 [2025-09-24 16:54:03.725] data.CHLH_FadeInType0=0 [2025-09-24 16:54:03.725] data.WU_FadeInDelay=0 [2025-09-24 16:54:03.725] max_time_out=0 [2025-09-24 16:54:03.725] No splash screen [2025-09-24 16:54:03.725] stop dss Done [2025-09-24 16:54:03.741] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:54:03.757] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:54:03.807] /dev/mem opened. [2025-09-24 16:54:03.807] Memory mapped at address 0xffff9fa6a000. [2025-09-24 16:54:03.807] Read at address 0x00600018 (0xffff9fa6a018): 0x00000000 [2025-09-24 16:54:03.807] Write at address 0x00600018 (0xffff9fa6a018): 0x00400040, readback 0x00400040 [2025-09-24 16:54:04.032] Loaded PowerVR consumer services. [2025-09-24 16:54:04.080] 512+0 records in [2025-09-24 16:54:04.080] 512+0 records out [2025-09-24 16:54:04.095] Waiting data available... [2025-09-24 16:54:04.127] Starting syslogd/klogd: done [2025-09-24 16:54:04.143] DML Start [2025-09-24 16:54:04.335] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:54:04.575] DML res1: 0 [2025-09-24 16:54:05.019] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:54:05.019] Read Success [2025-09-24 16:54:05.019] Verifying certificate... [2025-09-24 16:54:05.291] Verified OK [2025-09-24 16:54:05.339] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:54:07.080] Verified OK [2025-09-24 16:54:07.080] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:54:07.607] Verified OK [2025-09-24 16:54:07.607] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:54:10.085] fs.protected_hardlinks = 1 [2025-09-24 16:54:10.085] fs.protected_symlinks = 1 [2025-09-24 16:54:10.101] kernel.modules_disabled = 1 [2025-09-24 16:54:10.292] [2025-09-24 16:54:10.292] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:54:11.635] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:54:19.339] SBL1:1210.0.1.0 [2025-09-24 16:54:19.371] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:54:20.954] SBL2:1210.0.1.0 [2025-09-24 16:54:20.986] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:54:21.098] j-A [2025-09-24 16:54:28.469] The R5 Autosar Classic is running [2025-09-24 16:54:28.469] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:54:28.469] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:54:29.076] INIT: version 2.96 booting [2025-09-24 16:54:29.188] INIT: Entering runlevel: 5 [2025-09-24 16:54:29.333] mtd32 attached [2025-09-24 16:54:29.349] mtd28 attached [2025-09-24 16:54:29.365] mtd24 attached [2025-09-24 16:54:29.397] ubi0:dml_code is mounted. [2025-09-24 16:54:29.413] RTNETLINK answers: File exists [2025-09-24 16:54:29.453] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:54:29.453] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:54:29.453] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:54:29.453] ubi2:textures is mounted. [2025-09-24 16:54:29.453] ubi1:animations is mounted. [2025-09-24 16:54:29.453] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:54:29.453] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:54:29.483] data.LB_FadeInType0=100 [2025-09-24 16:54:29.483] data.CHLH_FadeInType0=0 [2025-09-24 16:54:29.483] data.WU_FadeInDelay=0 [2025-09-24 16:54:29.483] max_time_out=0 [2025-09-24 16:54:29.483] No splash screen [2025-09-24 16:54:29.483] stop dss Done [2025-09-24 16:54:29.507] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:54:29.507] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:54:29.561] /dev/mem opened. [2025-09-24 16:54:29.561] Memory mapped at address 0xffff9e269000. [2025-09-24 16:54:29.561] Read at address 0x00600018 (0xffff9e269018): 0x00000000 [2025-09-24 16:54:29.561] Write at address 0x00600018 (0xffff9e269018): 0x00400040, readback 0x00400040 [2025-09-24 16:54:29.625] Loaded PowerVR consumer services. [2025-09-24 16:54:29.801] Waiting data available... [2025-09-24 16:54:29.817] 512+0 records in [2025-09-24 16:54:29.817] 512+0 records out [2025-09-24 16:54:29.833] Starting syslogd/klogd: done [2025-09-24 16:54:29.866] DML Start [2025-09-24 16:54:30.025] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:54:30.249] DML res1: 0 [2025-09-24 16:54:30.712] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:54:30.712] Read Success [2025-09-24 16:54:30.712] Verifying certificate... [2025-09-24 16:54:30.935] Verified OK [2025-09-24 16:54:30.967] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:54:32.611] Verified OK [2025-09-24 16:54:32.611] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:54:33.219] Verified OK [2025-09-24 16:54:33.240] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:54:35.815] fs.protected_hardlinks = 1 [2025-09-24 16:54:35.815] fs.protected_symlinks = 1 [2025-09-24 16:54:35.831] kernel.modules_disabled = 1 [2025-09-24 16:54:36.038] [2025-09-24 16:54:36.038] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:54:37.347] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:54:45.035] SBL1:1210.0.1.0 [2025-09-24 16:54:45.083] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:54:46.650] SBL2:1210.0.1.0 [2025-09-24 16:54:46.698] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:54:46.794] j-A [2025-09-24 16:54:54.147] The R5 Autosar Classic is running [2025-09-24 16:54:54.172] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:54:54.172] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:54:54.780] INIT: version 2.96 booting [2025-09-24 16:54:54.892] INIT: Entering runlevel: 5 [2025-09-24 16:54:55.051] mtd24 attached [2025-09-24 16:54:55.051] mtd28 attached [2025-09-24 16:54:55.067] mtd32 attached [2025-09-24 16:54:55.099] ubi0:textures is mounted. [2025-09-24 16:54:55.115] RTNETLINK answers: File exists [2025-09-24 16:54:55.115] ubi1:animations is mounted. [2025-09-24 16:54:55.171] ubi2:dml_code is mounted. [2025-09-24 16:54:55.171] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:54:55.171] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:54:55.171] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:54:55.171] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:54:55.171] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:54:55.171] data.LB_FadeInType0=100 [2025-09-24 16:54:55.171] data.CHLH_FadeInType0=0 [2025-09-24 16:54:55.171] data.WU_FadeInDelay=0 [2025-09-24 16:54:55.171] max_time_out=0 [2025-09-24 16:54:55.171] No splash screen [2025-09-24 16:54:55.171] stop dss Done [2025-09-24 16:54:55.219] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:54:55.257] /dev/mem opened. [2025-09-24 16:54:55.257] Memory mapped at address 0xffffbb931000. [2025-09-24 16:54:55.257] Read at address 0x00600018 (0xffffbb931018): 0x00000000 [2025-09-24 16:54:55.257] Write at address 0x00600018 (0xffffbb931018): 0x00400040, readback 0x00400040 [2025-09-24 16:54:55.257] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:54:55.352] Loaded PowerVR consumer services. [2025-09-24 16:54:55.497] Waiting data available... [2025-09-24 16:54:55.512] 512+0 records in [2025-09-24 16:54:55.512] 512+0 records out [2025-09-24 16:54:55.544] Starting syslogd/klogd: done [2025-09-24 16:54:55.560] DML Start [2025-09-24 16:54:55.704] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:54:55.944] DML res1: 0 [2025-09-24 16:54:56.400] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:54:56.400] Read Success [2025-09-24 16:54:56.400] Verifying certificate... [2025-09-24 16:54:56.656] Verified OK [2025-09-24 16:54:56.672] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:54:58.271] Verified OK [2025-09-24 16:54:58.287] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:54:58.932] Verified OK [2025-09-24 16:54:58.932] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:55:01.602] fs.protected_hardlinks = 1 [2025-09-24 16:55:01.618] fs.protected_symlinks = 1 [2025-09-24 16:55:01.618] kernel.modules_disabled = 1 [2025-09-24 16:55:01.826] [2025-09-24 16:55:01.826] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:55:03.017] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:55:10.766] SBL1:1210.0.1.0 [2025-09-24 16:55:10.814] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:55:12.381] SBL2:1210.0.1.0 [2025-09-24 16:55:12.429] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:55:12.524] j-A [2025-09-24 16:55:19.878] The R5 Autosar Classic is running [2025-09-24 16:55:19.902] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:55:19.902] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:55:20.509] INIT: version 2.96 booting [2025-09-24 16:55:20.621] INIT: Entering runlevel: 5 [2025-09-24 16:55:20.765] mtd24 attached [2025-09-24 16:55:20.781] mtd28 attached [2025-09-24 16:55:20.797] mtd32 attached [2025-09-24 16:55:20.845] ubi0:textures is mounted. [2025-09-24 16:55:20.845] ubi1:animations is mounted. [2025-09-24 16:55:20.880] RTNETLINK answers: File exists [2025-09-24 16:55:20.880] ubi2:dml_code is mounted. [2025-09-24 16:55:20.880] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:55:20.880] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:55:20.880] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:55:20.912] data.LB_FadeInType0=100 [2025-09-24 16:55:20.912] data.CHLH_FadeInType0=0 [2025-09-24 16:55:20.912] data.WU_FadeInDelay=0 [2025-09-24 16:55:20.912] max_time_out=0 [2025-09-24 16:55:20.912] No splash screen [2025-09-24 16:55:20.912] stop dss Done [2025-09-24 16:55:20.912] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:55:20.912] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:55:20.960] /dev/mem opened. [2025-09-24 16:55:20.992] Memory mapped at address 0xffffb8df2000. [2025-09-24 16:55:20.992] Read at address 0x00600018 (0xffffb8df2018): 0x00000000 [2025-09-24 16:55:20.992] Write at address 0x00600018 (0xffffb8df2018): 0x00400040, readback 0x00400040 [2025-09-24 16:55:21.024] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:55:21.040] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:55:21.184] Loaded PowerVR consumer services. [2025-09-24 16:55:21.274] Waiting data available... [2025-09-24 16:55:21.274] 512+0 records in [2025-09-24 16:55:21.274] 512+0 records out [2025-09-24 16:55:21.290] Starting syslogd/klogd: done [2025-09-24 16:55:21.306] DML Start [2025-09-24 16:55:21.483] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:55:21.690] DML res1: 0 [2025-09-24 16:55:22.154] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:55:22.170] Read Success [2025-09-24 16:55:22.170] Verifying certificate... [2025-09-24 16:55:22.442] Verified OK [2025-09-24 16:55:22.458] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:55:24.191] Verified OK [2025-09-24 16:55:24.191] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:55:24.820] Verified OK [2025-09-24 16:55:24.820] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:55:27.426] fs.protected_hardlinks = 1 [2025-09-24 16:55:27.442] fs.protected_symlinks = 1 [2025-09-24 16:55:27.442] kernel.modules_disabled = 1 [2025-09-24 16:55:27.634] [2025-09-24 16:55:27.634] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:55:28.802] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:55:36.482] SBL1:1210.0.1.0 [2025-09-24 16:55:36.530] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:55:38.097] SBL2:1210.0.1.0 [2025-09-24 16:55:38.145] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:55:38.257] j-A [2025-09-24 16:55:45.594] The R5 Autosar Classic is running [2025-09-24 16:55:45.625] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:55:45.625] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:55:46.233] INIT: version 2.96 booting [2025-09-24 16:55:46.345] INIT: Entering runlevel: 5 [2025-09-24 16:55:46.489] mtd28 attached [2025-09-24 16:55:46.505] mtd24 attached [2025-09-24 16:55:46.521] mtd32 attached [2025-09-24 16:55:46.622] ubi0:animations is mounted. [2025-09-24 16:55:46.622] RTNETLINK answers: File exists [2025-09-24 16:55:46.622] ubi1:textures is mounted. [2025-09-24 16:55:46.622] ubi2:dml_code is mounted. [2025-09-24 16:55:46.622] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:55:46.622] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:55:46.622] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:55:46.622] data.LB_FadeInType0=100 [2025-09-24 16:55:46.622] data.CHLH_FadeInType0=0 [2025-09-24 16:55:46.622] data.WU_FadeInDelay=0 [2025-09-24 16:55:46.622] max_time_out=0 [2025-09-24 16:55:46.622] No splash screen [2025-09-24 16:55:46.622] stop dss Done [2025-09-24 16:55:46.622] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:55:46.622] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:55:46.688] /dev/mem opened. [2025-09-24 16:55:46.688] Memory mapped at address 0xffff8c260000. [2025-09-24 16:55:46.688] Read at address 0x00600018 (0xffff8c260018): 0x00000000 [2025-09-24 16:55:46.688] Write at address 0x00600018 (0xffff8c260018): 0x00400040, readback 0x00400040 [2025-09-24 16:55:46.703] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:55:46.719] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:55:46.927] Loaded PowerVR consumer services. [2025-09-24 16:55:47.008] Waiting data available... [2025-09-24 16:55:47.008] 512+0 records in [2025-09-24 16:55:47.023] 512+0 records out [2025-09-24 16:55:47.055] Starting syslogd/klogd: done [2025-09-24 16:55:47.071] DML Start [2025-09-24 16:55:47.263] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:55:47.503] DML res1: 0 [2025-09-24 16:55:47.854] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:55:47.870] Read Success [2025-09-24 16:55:47.870] Verifying certificate... [2025-09-24 16:55:48.094] Verified OK [2025-09-24 16:55:48.094] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:55:50.010] Verified OK [2025-09-24 16:55:50.010] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:55:50.549] Verified OK [2025-09-24 16:55:50.549] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:55:52.979] fs.protected_hardlinks = 1 [2025-09-24 16:55:52.979] fs.protected_symlinks = 1 [2025-09-24 16:55:52.995] kernel.modules_disabled = 1 [2025-09-24 16:55:53.187] [2025-09-24 16:55:53.187] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:55:54.568] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:56:02.256] SBL1:1210.0.1.0 [2025-09-24 16:56:02.288] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:56:03.871] SBL2:1210.0.1.0 [2025-09-24 16:56:03.903] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 16:56:04.015] j-A [2025-09-24 16:56:11.368] The R5 Autosar Classic is running [2025-09-24 16:56:11.368] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:56:11.389] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:56:11.996] INIT: version 2.96 booting [2025-09-24 16:56:12.108] INIT: Entering runlevel: 5 [2025-09-24 16:56:12.268] mtd28 attached [2025-09-24 16:56:12.268] mtd32 attached [2025-09-24 16:56:12.284] mtd24 attached [2025-09-24 16:56:12.316] ubi0:animations is mounted. [2025-09-24 16:56:12.332] RTNETLINK answers: File exists [2025-09-24 16:56:12.332] ubi2:textures is mounted. [2025-09-24 16:56:12.390] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:56:12.390] ubi1:dml_code is mounted. [2025-09-24 16:56:12.390] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:56:12.390] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:56:12.390] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:56:12.390] data.LB_FadeInType0=100 [2025-09-24 16:56:12.390] data.CHLH_FadeInType0=0 [2025-09-24 16:56:12.390] data.WU_FadeInDelay=0 [2025-09-24 16:56:12.390] max_time_out=0 [2025-09-24 16:56:12.390] No splash screen [2025-09-24 16:56:12.390] stop dss Done [2025-09-24 16:56:12.390] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:56:12.437] /dev/mem opened. [2025-09-24 16:56:12.437] Memory mapped at address 0xffff8cb0c000. [2025-09-24 16:56:12.463] Read at address 0x00600018 (0xffff8cb0c018): 0x00000000 [2025-09-24 16:56:12.463] Write at address 0x00600018 (0xffff8cb0c018): 0x00400040, readback 0x00400040 [2025-09-24 16:56:12.511] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:56:12.527] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:56:12.735] Loaded PowerVR consumer services. [2025-09-24 16:56:12.767] 512+0 records in [2025-09-24 16:56:12.767] 512+0 records out [2025-09-24 16:56:12.783] Waiting data available... [2025-09-24 16:56:12.815] Starting syslogd/klogd: done [2025-09-24 16:56:12.831] DML Start [2025-09-24 16:56:13.007] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:56:13.263] DML res1: 0 [2025-09-24 16:56:13.669] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:56:13.669] Read Success [2025-09-24 16:56:13.669] Verifying certificate... [2025-09-24 16:56:13.892] Verified OK [2025-09-24 16:56:13.909] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:56:15.647] Verified OK [2025-09-24 16:56:15.647] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:56:16.213] Verified OK [2025-09-24 16:56:16.213] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:56:18.836] fs.protected_hardlinks = 1 [2025-09-24 16:56:18.836] fs.protected_symlinks = 1 [2025-09-24 16:56:18.836] kernel.modules_disabled = 1 [2025-09-24 16:56:19.043] [2025-09-24 16:56:19.043] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:56:20.366] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:56:27.961] SBL1:1210.0.1.0 [2025-09-24 16:56:28.009] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:56:29.576] SBL2:1210.0.1.0 [2025-09-24 16:56:29.624] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:56:29.721] j-A [2025-09-24 16:56:37.074] The R5 Autosar Classic is running [2025-09-24 16:56:37.096] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:56:37.096] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:56:37.703] INIT: version 2.96 booting [2025-09-24 16:56:37.815] INIT: Entering runlevel: 5 [2025-09-24 16:56:37.975] mtd32 attached [2025-09-24 16:56:37.975] mtd24 attached [2025-09-24 16:56:37.991] mtd28 attached [2025-09-24 16:56:38.039] ubi0:dml_code is mounted. [2025-09-24 16:56:38.039] RTNETLINK answers: File exists [2025-09-24 16:56:38.103] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:56:38.103] ubi2:animations is mounted. [2025-09-24 16:56:38.103] ubi1:textures is mounted. [2025-09-24 16:56:38.103] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:56:38.103] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:56:38.103] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:56:38.103] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:56:38.103] data.LB_FadeInType0=100 [2025-09-24 16:56:38.103] data.CHLH_FadeInType0=0 [2025-09-24 16:56:38.103] data.WU_FadeInDelay=0 [2025-09-24 16:56:38.103] max_time_out=0 [2025-09-24 16:56:38.103] No splash screen [2025-09-24 16:56:38.103] stop dss Done [2025-09-24 16:56:38.188] /dev/mem opened. [2025-09-24 16:56:38.188] Memory mapped at address 0xffff8dbcf000. [2025-09-24 16:56:38.188] Read at address 0x00600018 (0xffff8dbcf018): 0x00000000 [2025-09-24 16:56:38.188] Write at address 0x00600018 (0xffff8dbcf018): 0x00400040, readback 0x00400040 [2025-09-24 16:56:38.188] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:56:38.188] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:56:38.413] Loaded PowerVR consumer services. [2025-09-24 16:56:38.429] Waiting data available... [2025-09-24 16:56:38.461] 512+0 records in [2025-09-24 16:56:38.461] 512+0 records out [2025-09-24 16:56:38.476] Starting syslogd/klogd: done [2025-09-24 16:56:38.508] DML Start [2025-09-24 16:56:38.636] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:56:38.828] DML res1: 0 [2025-09-24 16:56:39.308] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:56:39.329] Read Success [2025-09-24 16:56:39.329] Verifying certificate... [2025-09-24 16:56:39.552] Verified OK [2025-09-24 16:56:39.568] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:56:41.141] Verified OK [2025-09-24 16:56:41.141] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:56:41.716] Verified OK [2025-09-24 16:56:41.716] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:56:44.483] fs.protected_hardlinks = 1 [2025-09-24 16:56:44.483] fs.protected_symlinks = 1 [2025-09-24 16:56:44.499] kernel.modules_disabled = 1 [2025-09-24 16:56:44.690] [2025-09-24 16:56:44.690] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:56:46.015] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:56:53.693] SBL1:1210.0.1.0 [2025-09-24 16:56:53.725] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:56:55.308] SBL2:1210.0.1.0 [2025-09-24 16:56:55.339] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:56:55.452] j-A [2025-09-24 16:57:02.805] The R5 Autosar Classic is running [2025-09-24 16:57:02.805] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:57:02.826] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:57:03.434] INIT: version 2.96 booting [2025-09-24 16:57:03.546] INIT: Entering runlevel: 5 [2025-09-24 16:57:03.706] mtd24 attached [2025-09-24 16:57:03.706] mtd28 attached [2025-09-24 16:57:03.737] mtd32 attached [2025-09-24 16:57:03.769] ubi0:textures is mounted. [2025-09-24 16:57:03.769] ubi1:animations is mounted. [2025-09-24 16:57:03.797] RTNETLINK answers: File exists [2025-09-24 16:57:03.797] ubi2:dml_code is mounted. [2025-09-24 16:57:03.797] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:57:03.838] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:57:03.838] data.LB_FadeInType0=100 [2025-09-24 16:57:03.838] data.CHLH_FadeInType0=0 [2025-09-24 16:57:03.838] data.WU_FadeInDelay=0 [2025-09-24 16:57:03.838] max_time_out=0 [2025-09-24 16:57:03.838] No splash screen [2025-09-24 16:57:03.838] stop dss Done [2025-09-24 16:57:03.838] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:57:03.838] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:57:03.838] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:57:03.904] /dev/mem opened. [2025-09-24 16:57:03.904] Memory mapped at address 0xffff89dbe000. [2025-09-24 16:57:03.904] Read at address 0x00600018 (0xffff89dbe018): 0x00000000 [2025-09-24 16:57:03.904] Write at address 0x00600018 (0xffff89dbe018): 0x00400040, readback 0x00400040 [2025-09-24 16:57:03.920] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:57:03.936] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:57:04.097] Loaded PowerVR consumer services. [2025-09-24 16:57:04.192] Waiting data available... [2025-09-24 16:57:04.208] 512+0 records in [2025-09-24 16:57:04.224] 512+0 records out [2025-09-24 16:57:04.256] Starting syslogd/klogd: done [2025-09-24 16:57:04.272] DML Start [2025-09-24 16:57:04.496] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:57:04.704] DML res1: 0 [2025-09-24 16:57:05.098] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:57:05.098] Read Success [2025-09-24 16:57:05.098] Verifying certificate... [2025-09-24 16:57:05.307] Verified OK [2025-09-24 16:57:05.323] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:57:07.055] Verified OK [2025-09-24 16:57:07.055] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:57:07.663] Verified OK [2025-09-24 16:57:07.663] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:57:10.253] fs.protected_hardlinks = 1 [2025-09-24 16:57:10.284] fs.protected_symlinks = 1 [2025-09-24 16:57:10.284] kernel.modules_disabled = 1 [2025-09-24 16:57:10.459] [2025-09-24 16:57:10.459] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:57:11.706] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:57:19.391] SBL1:1210.0.1.0 [2025-09-24 16:57:19.439] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:57:21.006] SBL2:1210.0.1.0 [2025-09-24 16:57:21.054] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 16:57:21.165] j-A [2025-09-24 16:57:28.503] The R5 Autosar Classic is running [2025-09-24 16:57:28.534] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:57:28.534] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:57:29.141] INIT: version 2.96 booting [2025-09-24 16:57:29.254] INIT: Entering runlevel: 5 [2025-09-24 16:57:29.397] mtd24 attached [2025-09-24 16:57:29.413] mtd28 attached [2025-09-24 16:57:29.429] mtd32 attached [2025-09-24 16:57:29.461] ubi0:textures is mounted. [2025-09-24 16:57:29.477] ubi1:animations is mounted. [2025-09-24 16:57:29.477] RTNETLINK answers: File exists [2025-09-24 16:57:29.537] ubi2:dml_code is mounted. [2025-09-24 16:57:29.537] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:57:29.537] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:57:29.537] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:57:29.537] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:57:29.537] data.LB_FadeInType0=100 [2025-09-24 16:57:29.537] data.CHLH_FadeInType0=0 [2025-09-24 16:57:29.537] data.WU_FadeInDelay=0 [2025-09-24 16:57:29.537] max_time_out=0 [2025-09-24 16:57:29.537] No splash screen [2025-09-24 16:57:29.537] stop dss Done [2025-09-24 16:57:29.537] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:57:29.610] /dev/mem opened. [2025-09-24 16:57:29.610] Memory mapped at address 0xffff87798000. [2025-09-24 16:57:29.610] Read at address 0x00600018 (0xffff87798018): 0x00000000 [2025-09-24 16:57:29.610] Write at address 0x00600018 (0xffff87798018): 0x00400040, readback 0x00400040 [2025-09-24 16:57:29.610] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:57:29.642] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:57:29.721] Loaded PowerVR consumer services. [2025-09-24 16:57:29.881] Waiting data available... [2025-09-24 16:57:29.898] 512+0 records in [2025-09-24 16:57:29.898] 512+0 records out [2025-09-24 16:57:29.930] Starting syslogd/klogd: done [2025-09-24 16:57:29.946] DML Start [2025-09-24 16:57:30.153] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:57:30.377] DML res1: 0 [2025-09-24 16:57:30.712] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:57:30.712] Read Success [2025-09-24 16:57:30.712] Verifying certificate... [2025-09-24 16:57:30.920] Verified OK [2025-09-24 16:57:30.935] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:57:32.527] Verified OK [2025-09-24 16:57:32.527] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:57:33.053] Verified OK [2025-09-24 16:57:33.069] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:57:35.868] fs.protected_hardlinks = 1 [2025-09-24 16:57:35.884] fs.protected_symlinks = 1 [2025-09-24 16:57:35.884] kernel.modules_disabled = 1 [2025-09-24 16:57:36.075] [2025-09-24 16:57:36.075] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:57:37.399] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:57:45.102] SBL1:1210.0.1.0 [2025-09-24 16:57:45.134] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:57:46.717] SBL2:1210.0.1.0 [2025-09-24 16:57:46.749] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:57:46.861] j-A [2025-09-24 16:57:54.234] The R5 Autosar Classic is running [2025-09-24 16:57:54.234] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:57:54.234] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:57:54.841] INIT: version 2.96 booting [2025-09-24 16:57:54.953] INIT: Entering runlevel: 5 [2025-09-24 16:57:55.113] mtd28 attached [2025-09-24 16:57:55.113] mtd24 attached [2025-09-24 16:57:55.129] mtd32 attached [2025-09-24 16:57:55.177] ubi0:animations is mounted. [2025-09-24 16:57:55.247] RTNETLINK answers: File exists [2025-09-24 16:57:55.247] ubi1:textures is mounted. [2025-09-24 16:57:55.247] ubi2:dml_code is mounted. [2025-09-24 16:57:55.247] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:57:55.247] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:57:55.247] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:57:55.247] data.LB_FadeInType0=100 [2025-09-24 16:57:55.247] data.CHLH_FadeInType0=0 [2025-09-24 16:57:55.247] data.WU_FadeInDelay=0 [2025-09-24 16:57:55.247] max_time_out=0 [2025-09-24 16:57:55.247] No splash screen [2025-09-24 16:57:55.247] stop dss Done [2025-09-24 16:57:55.247] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:57:55.247] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:57:55.321] /dev/mem opened. [2025-09-24 16:57:55.321] Memory mapped at address 0xffff8b1c9000. [2025-09-24 16:57:55.321] Read at address 0x00600018 (0xffff8b1c9018): 0x00000000 [2025-09-24 16:57:55.321] Write at address 0x00600018 (0xffff8b1c9018): 0x00400040, readback 0x00400040 [2025-09-24 16:57:55.321] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:57:55.321] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:57:55.465] Loaded PowerVR consumer services. [2025-09-24 16:57:55.576] Waiting data available... [2025-09-24 16:57:55.592] 512+0 records in [2025-09-24 16:57:55.592] 512+0 records out [2025-09-24 16:57:55.624] Starting syslogd/klogd: done [2025-09-24 16:57:55.640] DML Start [2025-09-24 16:57:55.816] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:57:56.057] DML res1: 0 [2025-09-24 16:57:56.446] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:57:56.446] Read Success [2025-09-24 16:57:56.446] Verifying certificate... [2025-09-24 16:57:56.670] Verified OK [2025-09-24 16:57:56.702] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:57:58.396] Verified OK [2025-09-24 16:57:58.396] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:57:59.003] Verified OK [2025-09-24 16:57:59.003] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:58:01.577] fs.protected_hardlinks = 1 [2025-09-24 16:58:01.593] fs.protected_symlinks = 1 [2025-09-24 16:58:01.593] kernel.modules_disabled = 1 [2025-09-24 16:58:01.785] [2025-09-24 16:58:01.785] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:58:03.125] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:58:10.813] SBL1:1210.0.1.0 [2025-09-24 16:58:10.861] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:58:12.427] SBL2:1210.0.1.0 [2025-09-24 16:58:12.475] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:58:12.572] j-A [2025-09-24 16:58:19.926] The R5 Autosar Classic is running [2025-09-24 16:58:19.948] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:58:19.948] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:58:20.556] INIT: version 2.96 booting [2025-09-24 16:58:20.668] INIT: Entering runlevel: 5 [2025-09-24 16:58:20.827] mtd24 attached [2025-09-24 16:58:20.843] mtd28 attached [2025-09-24 16:58:20.859] mtd32 attached [2025-09-24 16:58:20.955] RTNETLINK answers: File exists [2025-09-24 16:58:20.955] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:58:20.955] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:58:20.955] ubi1:animations is mounted. [2025-09-24 16:58:20.955] ubi2:dml_code is mounted. [2025-09-24 16:58:20.955] ubi0:textures is mounted. [2025-09-24 16:58:20.955] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:58:20.955] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:58:20.955] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:58:20.955] data.LB_FadeInType0=100 [2025-09-24 16:58:20.955] data.CHLH_FadeInType0=0 [2025-09-24 16:58:20.955] data.WU_FadeInDelay=0 [2025-09-24 16:58:20.955] max_time_out=0 [2025-09-24 16:58:20.955] No splash screen [2025-09-24 16:58:20.955] stop dss Done [2025-09-24 16:58:20.987] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:58:20.987] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:58:21.037] /dev/mem opened. [2025-09-24 16:58:21.037] Memory mapped at address 0xffff86567000. [2025-09-24 16:58:21.037] Read at address 0x00600018 (0xffff86567018): 0x00000000 [2025-09-24 16:58:21.037] Write at address 0x00600018 (0xffff86567018): 0x00400040, readback 0x00400040 [2025-09-24 16:58:21.118] Loaded PowerVR consumer services. [2025-09-24 16:58:21.310] Waiting data available... [2025-09-24 16:58:21.326] 512+0 records in [2025-09-24 16:58:21.326] 512+0 records out [2025-09-24 16:58:21.373] Starting syslogd/klogd: done [2025-09-24 16:58:21.389] DML Start [2025-09-24 16:58:21.581] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:58:21.774] DML res1: 0 [2025-09-24 16:58:22.212] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:58:22.212] Read Success [2025-09-24 16:58:22.212] Verifying certificate... [2025-09-24 16:58:22.484] Verified OK [2025-09-24 16:58:22.500] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:58:24.195] Verified OK [2025-09-24 16:58:24.195] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:58:24.786] Verified OK [2025-09-24 16:58:24.786] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:58:27.297] fs.protected_hardlinks = 1 [2025-09-24 16:58:27.297] fs.protected_symlinks = 1 [2025-09-24 16:58:27.312] kernel.modules_disabled = 1 [2025-09-24 16:58:27.504] [2025-09-24 16:58:27.504] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:58:28.895] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:58:36.561] SBL1:1210.0.1.0 [2025-09-24 16:58:36.592] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:58:38.175] SBL2:1210.0.1.0 [2025-09-24 16:58:38.207] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 16:58:38.319] j-A [2025-09-24 16:58:45.691] The R5 Autosar Classic is running [2025-09-24 16:58:45.691] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:58:45.691] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:58:46.299] INIT: version 2.96 booting [2025-09-24 16:58:46.411] INIT: Entering runlevel: 5 [2025-09-24 16:58:46.570] mtd24 attached [2025-09-24 16:58:46.570] mtd28 attached [2025-09-24 16:58:46.586] mtd32 attached [2025-09-24 16:58:46.634] RTNETLINK answers: File exists [2025-09-24 16:58:46.684] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:58:46.684] ubi1:animations is mounted. [2025-09-24 16:58:46.684] ubi0:textures is mounted. [2025-09-24 16:58:46.684] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:58:46.684] ubi2:dml_code is mounted. [2025-09-24 16:58:46.684] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:58:46.684] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:58:46.684] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:58:46.684] data.LB_FadeInType0=100 [2025-09-24 16:58:46.705] data.CHLH_FadeInType0=0 [2025-09-24 16:58:46.705] data.WU_FadeInDelay=0 [2025-09-24 16:58:46.705] max_time_out=0 [2025-09-24 16:58:46.705] No splash screen [2025-09-24 16:58:46.705] stop dss Done [2025-09-24 16:58:46.737] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:58:46.778] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:58:46.778] /dev/mem opened. [2025-09-24 16:58:46.778] Memory mapped at address 0xffffb30c6000. [2025-09-24 16:58:46.778] Read at address 0x00600018 (0xffffb30c6018): 0x00000000 [2025-09-24 16:58:46.778] Write at address 0x00600018 (0xffffb30c6018): 0x00400040, readback 0x00400040 [2025-09-24 16:58:47.017] Loaded PowerVR consumer services. [2025-09-24 16:58:47.033] Waiting data available... [2025-09-24 16:58:47.065] 512+0 records in [2025-09-24 16:58:47.065] 512+0 records out [2025-09-24 16:58:47.113] Starting syslogd/klogd: done [2025-09-24 16:58:47.129] DML Start [2025-09-24 16:58:47.337] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:58:47.593] DML res1: 0 [2025-09-24 16:58:47.928] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:58:47.950] Read Success [2025-09-24 16:58:47.950] Verifying certificate... [2025-09-24 16:58:48.221] Verified OK [2025-09-24 16:58:48.253] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:58:49.995] Verified OK [2025-09-24 16:58:49.995] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:58:50.537] Verified OK [2025-09-24 16:58:50.537] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:58:52.999] fs.protected_hardlinks = 1 [2025-09-24 16:58:53.027] fs.protected_symlinks = 1 [2025-09-24 16:58:53.027] kernel.modules_disabled = 1 [2025-09-24 16:58:53.235] [2025-09-24 16:58:53.235] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:58:54.639] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:59:02.281] SBL1:1210.0.1.0 [2025-09-24 16:59:02.312] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:59:03.895] SBL2:1210.0.1.0 [2025-09-24 16:59:03.927] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:59:04.040] j-A [2025-09-24 16:59:11.414] The R5 Autosar Classic is running [2025-09-24 16:59:11.414] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:59:11.414] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:59:12.021] INIT: version 2.96 booting [2025-09-24 16:59:12.133] INIT: Entering runlevel: 5 [2025-09-24 16:59:12.277] mtd24 attached [2025-09-24 16:59:12.293] mtd28 attached [2025-09-24 16:59:12.325] ubi0:textures is mounted. [2025-09-24 16:59:12.325] mtd32 attached [2025-09-24 16:59:12.341] ubi1:animations is mounted. [2025-09-24 16:59:12.357] RTNETLINK answers: File exists [2025-09-24 16:59:12.395] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:59:12.395] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:59:12.395] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:59:12.395] ubi2:dml_code is mounted. [2025-09-24 16:59:12.395] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:59:12.395] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:59:12.418] data.LB_FadeInType0=100 [2025-09-24 16:59:12.418] data.CHLH_FadeInType0=0 [2025-09-24 16:59:12.418] data.WU_FadeInDelay=0 [2025-09-24 16:59:12.418] max_time_out=0 [2025-09-24 16:59:12.418] No splash screen [2025-09-24 16:59:12.418] stop dss Done [2025-09-24 16:59:12.435] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:59:12.467] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:59:12.500] /dev/mem opened. [2025-09-24 16:59:12.500] Memory mapped at address 0xffffaf0fe000. [2025-09-24 16:59:12.500] Read at address 0x00600018 (0xffffaf0fe018): 0x00000000 [2025-09-24 16:59:12.500] Write at address 0x00600018 (0xffffaf0fe018): 0x00400040, readback 0x00400040 [2025-09-24 16:59:12.580] Loaded PowerVR consumer services. [2025-09-24 16:59:12.755] Waiting data available... [2025-09-24 16:59:12.772] 512+0 records in [2025-09-24 16:59:12.772] 512+0 records out [2025-09-24 16:59:12.819] Starting syslogd/klogd: done [2025-09-24 16:59:12.836] DML Start [2025-09-24 16:59:12.995] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:59:13.219] DML res1: 0 [2025-09-24 16:59:13.731] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:59:13.747] Read Success [2025-09-24 16:59:13.747] Verifying certificate... [2025-09-24 16:59:13.986] Verified OK [2025-09-24 16:59:14.018] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:59:15.551] Verified OK [2025-09-24 16:59:15.551] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:59:16.174] Verified OK [2025-09-24 16:59:16.174] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:59:18.907] fs.protected_hardlinks = 1 [2025-09-24 16:59:18.907] fs.protected_symlinks = 1 [2025-09-24 16:59:18.923] kernel.modules_disabled = 1 [2025-09-24 16:59:19.131] [2025-09-24 16:59:19.131] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:59:20.273] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:59:27.992] SBL1:1210.0.1.0 [2025-09-24 16:59:28.040] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:59:29.606] SBL2:1210.0.1.0 [2025-09-24 16:59:29.654] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:59:29.750] j-A [2025-09-24 16:59:37.105] The R5 Autosar Classic is running [2025-09-24 16:59:37.128] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 16:59:37.128] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 16:59:37.735] INIT: version 2.96 booting [2025-09-24 16:59:37.846] INIT: Entering runlevel: 5 [2025-09-24 16:59:37.991] mtd28 attached [2025-09-24 16:59:38.007] mtd32 attached [2025-09-24 16:59:38.023] mtd24 attached [2025-09-24 16:59:38.039] ubi0:animations is mounted. [2025-09-24 16:59:38.071] RTNETLINK answers: File exists [2025-09-24 16:59:38.071] ubi1:dml_code is mounted. [2025-09-24 16:59:38.110] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 16:59:38.110] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 16:59:38.110] ubi2:textures is mounted. [2025-09-24 16:59:38.110] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 16:59:38.110] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 16:59:38.110] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 16:59:38.110] data.LB_FadeInType0=100 [2025-09-24 16:59:38.131] data.CHLH_FadeInType0=0 [2025-09-24 16:59:38.131] data.WU_FadeInDelay=0 [2025-09-24 16:59:38.131] max_time_out=0 [2025-09-24 16:59:38.131] No splash screen [2025-09-24 16:59:38.131] stop dss Done [2025-09-24 16:59:38.162] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 16:59:38.207] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 16:59:38.207] /dev/mem opened. [2025-09-24 16:59:38.207] Memory mapped at address 0xffff9612b000. [2025-09-24 16:59:38.207] Read at address 0x00600018 (0xffff9612b018): 0x00000000 [2025-09-24 16:59:38.207] Write at address 0x00600018 (0xffff9612b018): 0x00400040, readback 0x00400040 [2025-09-24 16:59:38.304] Loaded PowerVR consumer services. [2025-09-24 16:59:38.464] Waiting data available... [2025-09-24 16:59:38.496] 512+0 records in [2025-09-24 16:59:38.496] 512+0 records out [2025-09-24 16:59:38.544] Starting syslogd/klogd: done [2025-09-24 16:59:38.560] DML Start [2025-09-24 16:59:38.751] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 16:59:38.959] DML res1: 0 [2025-09-24 16:59:39.420] Read DML Algo certificate (mtd31) and save to file [2025-09-24 16:59:39.420] Read Success [2025-09-24 16:59:39.420] Verifying certificate... [2025-09-24 16:59:39.676] Verified OK [2025-09-24 16:59:39.692] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 16:59:41.416] Verified OK [2025-09-24 16:59:41.416] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 16:59:41.967] Verified OK [2025-09-24 16:59:41.967] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 16:59:44.429] fs.protected_hardlinks = 1 [2025-09-24 16:59:44.429] fs.protected_symlinks = 1 [2025-09-24 16:59:44.429] kernel.modules_disabled = 1 [2025-09-24 16:59:44.604] [2025-09-24 16:59:44.604] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 16:59:45.978] RTNETLINK answers: Cannot assign requested address [2025-09-24 16:59:53.698] SBL1:1210.0.1.0 [2025-09-24 16:59:53.730] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:59:55.314] SBL2:1210.0.1.0 [2025-09-24 16:59:55.345] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 16:59:55.457] j-A [2025-09-24 17:00:02.830] The R5 Autosar Classic is running [2025-09-24 17:00:02.830] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:00:02.830] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:00:03.437] INIT: version 2.96 booting [2025-09-24 17:00:03.549] INIT: Entering runlevel: 5 [2025-09-24 17:00:03.693] mtd24 attached [2025-09-24 17:00:03.709] mtd28 attached [2025-09-24 17:00:03.725] mtd32 attached [2025-09-24 17:00:03.741] ubi0:textures is mounted. [2025-09-24 17:00:03.773] RTNETLINK answers: File exists [2025-09-24 17:00:03.830] ubi1:animations is mounted. [2025-09-24 17:00:03.830] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:00:03.830] ubi2:dml_code is mounted. [2025-09-24 17:00:03.830] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:00:03.830] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:00:03.830] data.LB_FadeInType0=100 [2025-09-24 17:00:03.830] data.CHLH_FadeInType0=0 [2025-09-24 17:00:03.830] data.WU_FadeInDelay=0 [2025-09-24 17:00:03.830] max_time_out=0 [2025-09-24 17:00:03.830] No splash screen [2025-09-24 17:00:03.830] stop dss Done [2025-09-24 17:00:03.830] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:00:03.830] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:00:03.886] /dev/mem opened. [2025-09-24 17:00:03.886] Memory mapped at address 0xffff97af8000. [2025-09-24 17:00:03.886] Read at address 0x00600018 (0xffff97af8018): 0x00000000 [2025-09-24 17:00:03.886] Write at address 0x00600018 (0xffff97af8018): 0x00400040, readback 0x00400040 [2025-09-24 17:00:03.950] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:00:03.966] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:00:04.141] Loaded PowerVR consumer services. [2025-09-24 17:00:04.173] Waiting data available... [2025-09-24 17:00:04.206] 512+0 records in [2025-09-24 17:00:04.206] 512+0 records out [2025-09-24 17:00:04.254] Starting syslogd/klogd: done [2025-09-24 17:00:04.270] DML Start [2025-09-24 17:00:04.430] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:00:04.654] DML res1: 0 [2025-09-24 17:00:05.166] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:00:05.182] Read Success [2025-09-24 17:00:05.182] Verifying certificate... [2025-09-24 17:00:05.421] Verified OK [2025-09-24 17:00:05.436] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:00:07.073] Verified OK [2025-09-24 17:00:07.073] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:00:07.657] Verified OK [2025-09-24 17:00:07.657] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:00:10.311] fs.protected_hardlinks = 1 [2025-09-24 17:00:10.311] fs.protected_symlinks = 1 [2025-09-24 17:00:10.327] kernel.modules_disabled = 1 [2025-09-24 17:00:10.519] [2025-09-24 17:00:10.519] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:00:11.700] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:00:19.412] SBL1:1210.0.1.0 [2025-09-24 17:00:19.459] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:00:21.026] SBL2:1210.0.1.0 [2025-09-24 17:00:21.074] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:00:21.169] j-A [2025-09-24 17:00:28.524] The R5 Autosar Classic is running [2025-09-24 17:00:28.547] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:00:28.547] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:00:29.154] INIT: version 2.96 booting [2025-09-24 17:00:29.267] INIT: Entering runlevel: 5 [2025-09-24 17:00:29.411] mtd28 attached [2025-09-24 17:00:29.427] mtd32 attached [2025-09-24 17:00:29.442] mtd24 attached [2025-09-24 17:00:29.490] RTNETLINK answers: File exists [2025-09-24 17:00:29.490] ubi0:animations is mounted. [2025-09-24 17:00:29.554] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:00:29.554] ubi2:textures is mounted. [2025-09-24 17:00:29.554] ubi1:dml_code is mounted. [2025-09-24 17:00:29.554] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:00:29.554] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:00:29.554] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:00:29.554] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:00:29.554] data.LB_FadeInType0=100 [2025-09-24 17:00:29.554] data.CHLH_FadeInType0=0 [2025-09-24 17:00:29.554] data.WU_FadeInDelay=0 [2025-09-24 17:00:29.554] max_time_out=0 [2025-09-24 17:00:29.554] No splash screen [2025-09-24 17:00:29.554] stop dss Done [2025-09-24 17:00:29.602] /dev/mem opened. [2025-09-24 17:00:29.602] Memory mapped at address 0xffffa11b9000. [2025-09-24 17:00:29.637] Read at address 0x00600018 (0xffffa11b9018): 0x00000000 [2025-09-24 17:00:29.637] Write at address 0x00600018 (0xffffa11b9018): 0x00400040, readback 0x00400040 [2025-09-24 17:00:29.637] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:00:29.637] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:00:29.734] Loaded PowerVR consumer services. [2025-09-24 17:00:29.894] Waiting data available... [2025-09-24 17:00:29.925] 512+0 records in [2025-09-24 17:00:29.925] 512+0 records out [2025-09-24 17:00:29.941] Starting syslogd/klogd: done [2025-09-24 17:00:29.957] DML Start [2025-09-24 17:00:30.165] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:00:30.389] DML res1: 0 [2025-09-24 17:00:30.764] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:00:30.764] Read Success [2025-09-24 17:00:30.764] Verifying certificate... [2025-09-24 17:00:31.004] Verified OK [2025-09-24 17:00:31.020] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:00:32.641] Verified OK [2025-09-24 17:00:32.641] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:00:33.248] Verified OK [2025-09-24 17:00:33.264] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:00:35.822] fs.protected_hardlinks = 1 [2025-09-24 17:00:35.850] fs.protected_symlinks = 1 [2025-09-24 17:00:35.850] kernel.modules_disabled = 1 [2025-09-24 17:00:36.042] [2025-09-24 17:00:36.042] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:00:37.380] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:00:45.123] SBL1:1210.0.1.0 [2025-09-24 17:00:45.171] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:00:46.737] SBL2:1210.0.1.0 [2025-09-24 17:00:46.785] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:00:46.881] j-A [2025-09-24 17:00:54.235] The R5 Autosar Classic is running [2025-09-24 17:00:54.260] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:00:54.260] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:00:54.867] INIT: version 2.96 booting [2025-09-24 17:00:54.980] INIT: Entering runlevel: 5 [2025-09-24 17:00:55.123] mtd24 attached [2025-09-24 17:00:55.139] mtd32 attached [2025-09-24 17:00:55.155] mtd28 attached [2025-09-24 17:00:55.171] ubi0:textures is mounted. [2025-09-24 17:00:55.203] ubi1:dml_code is mounted. [2025-09-24 17:00:55.203] RTNETLINK answers: File exists [2025-09-24 17:00:55.261] ubi2:animations is mounted. [2025-09-24 17:00:55.261] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:00:55.261] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:00:55.261] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:00:55.261] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:00:55.261] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:00:55.261] data.LB_FadeInType0=100 [2025-09-24 17:00:55.261] data.CHLH_FadeInType0=0 [2025-09-24 17:00:55.261] data.WU_FadeInDelay=0 [2025-09-24 17:00:55.261] max_time_out=0 [2025-09-24 17:00:55.261] No splash screen [2025-09-24 17:00:55.261] stop dss Done [2025-09-24 17:00:55.308] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:00:55.308] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:00:55.342] /dev/mem opened. [2025-09-24 17:00:55.342] Memory mapped at address 0xffff9b910000. [2025-09-24 17:00:55.342] Read at address 0x00600018 (0xffff9b910018): 0x00000000 [2025-09-24 17:00:55.342] Write at address 0x00600018 (0xffff9b910018): 0x00400040, readback 0x00400040 [2025-09-24 17:00:55.566] Loaded PowerVR consumer services. [2025-09-24 17:00:55.582] Waiting data available... [2025-09-24 17:00:55.630] 512+0 records in [2025-09-24 17:00:55.630] 512+0 records out [2025-09-24 17:00:55.677] Starting syslogd/klogd: done [2025-09-24 17:00:55.693] DML Start [2025-09-24 17:00:55.870] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:00:56.110] DML res1: 0 [2025-09-24 17:00:56.596] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:00:56.596] Read Success [2025-09-24 17:00:56.596] Verifying certificate... [2025-09-24 17:00:56.852] Verified OK [2025-09-24 17:00:56.868] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:00:58.557] Verified OK [2025-09-24 17:00:58.557] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:00:59.128] Verified OK [2025-09-24 17:00:59.128] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:01:01.654] fs.protected_hardlinks = 1 [2025-09-24 17:01:01.654] fs.protected_symlinks = 1 [2025-09-24 17:01:01.670] kernel.modules_disabled = 1 [2025-09-24 17:01:01.863] [2025-09-24 17:01:01.863] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:01:03.141] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:01:10.847] SBL1:1210.0.1.0 [2025-09-24 17:01:10.895] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:01:12.462] SBL2:1210.0.1.0 [2025-09-24 17:01:12.510] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 17:01:12.622] j-A [2025-09-24 17:01:19.959] The R5 Autosar Classic is running [2025-09-24 17:01:19.990] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:01:19.990] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:01:20.598] INIT: version 2.96 booting [2025-09-24 17:01:20.710] INIT: Entering runlevel: 5 [2025-09-24 17:01:20.869] mtd32 attached [2025-09-24 17:01:20.869] mtd28 attached [2025-09-24 17:01:20.885] mtd24 attached [2025-09-24 17:01:20.933] RTNETLINK answers: File exists [2025-09-24 17:01:20.974] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:01:20.974] ubi0:dml_code is mounted. [2025-09-24 17:01:20.974] ubi1:animations is mounted. [2025-09-24 17:01:20.974] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:01:20.974] ubi2:textures is mounted. [2025-09-24 17:01:20.974] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:01:20.974] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:01:20.974] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:01:20.998] data.LB_FadeInType0=100 [2025-09-24 17:01:20.998] data.CHLH_FadeInType0=0 [2025-09-24 17:01:20.998] data.WU_FadeInDelay=0 [2025-09-24 17:01:20.998] max_time_out=0 [2025-09-24 17:01:20.998] No splash screen [2025-09-24 17:01:20.998] stop dss Done [2025-09-24 17:01:21.014] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:01:21.030] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:01:21.072] /dev/mem opened. [2025-09-24 17:01:21.072] Memory mapped at address 0xffffb6631000. [2025-09-24 17:01:21.072] Read at address 0x00600018 (0xffffb6631018): 0x00000000 [2025-09-24 17:01:21.072] Write at address 0x00600018 (0xffffb6631018): 0x00400040, readback 0x00400040 [2025-09-24 17:01:21.183] Loaded PowerVR consumer services. [2025-09-24 17:01:21.327] Waiting data available... [2025-09-24 17:01:21.343] 512+0 records in [2025-09-24 17:01:21.359] 512+0 records out [2025-09-24 17:01:21.391] Starting syslogd/klogd: done [2025-09-24 17:01:21.423] DML Start [2025-09-24 17:01:21.615] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:01:21.855] DML res1: 0 [2025-09-24 17:01:22.190] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:01:22.207] Read Success [2025-09-24 17:01:22.207] Verifying certificate... [2025-09-24 17:01:22.463] Verified OK [2025-09-24 17:01:22.479] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:01:24.186] Verified OK [2025-09-24 17:01:24.186] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:01:24.744] Verified OK [2025-09-24 17:01:24.744] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:01:27.190] fs.protected_hardlinks = 1 [2025-09-24 17:01:27.190] fs.protected_symlinks = 1 [2025-09-24 17:01:27.206] kernel.modules_disabled = 1 [2025-09-24 17:01:27.398] [2025-09-24 17:01:27.398] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:01:28.891] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:01:36.565] SBL1:1210.0.1.0 [2025-09-24 17:01:36.613] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:01:38.179] SBL2:1210.0.1.0 [2025-09-24 17:01:38.227] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 17:01:38.323] j-A [2025-09-24 17:01:45.676] The R5 Autosar Classic is running [2025-09-24 17:01:45.701] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:01:45.701] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:01:46.309] INIT: version 2.96 booting [2025-09-24 17:01:46.420] INIT: Entering runlevel: 5 [2025-09-24 17:01:46.564] mtd32 attached [2025-09-24 17:01:46.580] mtd28 attached [2025-09-24 17:01:46.580] mtd24 attached [2025-09-24 17:01:46.644] RTNETLINK answers: File exists [2025-09-24 17:01:46.644] ubi0:dml_code is mounted. [2025-09-24 17:01:46.698] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:01:46.698] ubi1:animations is mounted. [2025-09-24 17:01:46.698] ubi2:textures is mounted. [2025-09-24 17:01:46.698] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:01:46.698] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:01:46.698] data.LB_FadeInType0=100 [2025-09-24 17:01:46.698] data.CHLH_FadeInType0=0 [2025-09-24 17:01:46.698] data.WU_FadeInDelay=0 [2025-09-24 17:01:46.698] max_time_out=0 [2025-09-24 17:01:46.698] No splash screen [2025-09-24 17:01:46.698] stop dss Done [2025-09-24 17:01:46.698] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:01:46.698] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:01:46.766] /dev/mem opened. [2025-09-24 17:01:46.766] Memory mapped at address 0xffffb2262000. [2025-09-24 17:01:46.766] Read at address 0x00600018 (0xffffb2262018): 0x00000000 [2025-09-24 17:01:46.766] Write at address 0x00600018 (0xffffb2262018): 0x00400040, readback 0x00400040 [2025-09-24 17:01:46.766] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:01:46.766] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:01:46.926] Loaded PowerVR consumer services. [2025-09-24 17:01:47.038] Waiting data available... [2025-09-24 17:01:47.070] 512+0 records in [2025-09-24 17:01:47.070] 512+0 records out [2025-09-24 17:01:47.118] Starting syslogd/klogd: done [2025-09-24 17:01:47.134] DML Start [2025-09-24 17:01:47.310] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:01:47.501] DML res1: 0 [2025-09-24 17:01:48.021] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:01:48.021] Read Success [2025-09-24 17:01:48.021] Verifying certificate... [2025-09-24 17:01:48.261] Verified OK [2025-09-24 17:01:48.277] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:01:50.036] Verified OK [2025-09-24 17:01:50.036] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:01:50.622] Verified OK [2025-09-24 17:01:50.622] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:01:53.084] fs.protected_hardlinks = 1 [2025-09-24 17:01:53.100] fs.protected_symlinks = 1 [2025-09-24 17:01:53.100] kernel.modules_disabled = 1 [2025-09-24 17:01:53.275] [2025-09-24 17:01:53.275] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:01:54.551] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:02:02.269] SBL1:1210.0.1.0 [2025-09-24 17:02:02.317] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:02:03.884] SBL2:1210.0.1.0 [2025-09-24 17:02:03.932] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:02:04.028] j-A [2025-09-24 17:02:11.380] The R5 Autosar Classic is running [2025-09-24 17:02:11.404] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:02:11.404] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:02:12.012] INIT: version 2.96 booting [2025-09-24 17:02:12.123] INIT: Entering runlevel: 5 [2025-09-24 17:02:12.284] mtd32 attached [2025-09-24 17:02:12.284] mtd24 attached [2025-09-24 17:02:12.300] mtd28 attached [2025-09-24 17:02:12.383] RTNETLINK answers: File exists [2025-09-24 17:02:12.383] ubi0:dml_code is mounted. [2025-09-24 17:02:12.383] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:02:12.383] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:02:12.383] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:02:12.383] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:02:12.383] ubi2:animations is mounted. [2025-09-24 17:02:12.383] ubi1:textures is mounted. [2025-09-24 17:02:12.383] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:02:12.412] data.LB_FadeInType0=100 [2025-09-24 17:02:12.412] data.CHLH_FadeInType0=0 [2025-09-24 17:02:12.412] data.WU_FadeInDelay=0 [2025-09-24 17:02:12.412] max_time_out=0 [2025-09-24 17:02:12.412] No splash screen [2025-09-24 17:02:12.412] stop dss Done [2025-09-24 17:02:12.428] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:02:12.444] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:02:12.493] /dev/mem opened. [2025-09-24 17:02:12.493] Memory mapped at address 0xffffa2f4a000. [2025-09-24 17:02:12.493] Read at address 0x00600018 (0xffffa2f4a018): 0x00000000 [2025-09-24 17:02:12.493] Write at address 0x00600018 (0xffffa2f4a018): 0x00400040, readback 0x00400040 [2025-09-24 17:02:12.652] Loaded PowerVR consumer services. [2025-09-24 17:02:12.780] Waiting data available... [2025-09-24 17:02:12.780] 512+0 records in [2025-09-24 17:02:12.780] 512+0 records out [2025-09-24 17:02:12.812] Starting syslogd/klogd: done [2025-09-24 17:02:12.828] DML Start [2025-09-24 17:02:12.987] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:02:13.227] DML res1: 0 [2025-09-24 17:02:13.659] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:02:13.680] Read Success [2025-09-24 17:02:13.680] Verifying certificate... [2025-09-24 17:02:13.919] Verified OK [2025-09-24 17:02:13.919] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:02:15.495] Verified OK [2025-09-24 17:02:15.495] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:02:16.132] Verified OK [2025-09-24 17:02:16.132] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:02:18.930] fs.protected_hardlinks = 1 [2025-09-24 17:02:18.930] fs.protected_symlinks = 1 [2025-09-24 17:02:18.947] kernel.modules_disabled = 1 [2025-09-24 17:02:19.138] [2025-09-24 17:02:19.138] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:02:20.289] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:02:27.991] SBL1:1210.0.1.0 [2025-09-24 17:02:28.039] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:02:29.606] SBL2:1210.0.1.0 [2025-09-24 17:02:29.654] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:02:29.749] j-A [2025-09-24 17:02:37.102] The R5 Autosar Classic is running [2025-09-24 17:02:37.127] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:02:37.127] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:02:37.734] INIT: version 2.96 booting [2025-09-24 17:02:37.847] INIT: Entering runlevel: 5 [2025-09-24 17:02:38.007] mtd32 attached [2025-09-24 17:02:38.007] mtd24 attached [2025-09-24 17:02:38.022] mtd28 attached [2025-09-24 17:02:38.070] ubi0:dml_code is mounted. [2025-09-24 17:02:38.070] RTNETLINK answers: File exists [2025-09-24 17:02:38.109] ubi2:animations is mounted. [2025-09-24 17:02:38.109] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:02:38.109] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:02:38.109] ubi1:textures is mounted. [2025-09-24 17:02:38.109] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:02:38.109] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:02:38.109] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:02:38.140] data.LB_FadeInType0=100 [2025-09-24 17:02:38.140] data.CHLH_FadeInType0=0 [2025-09-24 17:02:38.140] data.WU_FadeInDelay=0 [2025-09-24 17:02:38.140] max_time_out=0 [2025-09-24 17:02:38.140] No splash screen [2025-09-24 17:02:38.140] stop dss Done [2025-09-24 17:02:38.166] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:02:38.166] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:02:38.214] /dev/mem opened. [2025-09-24 17:02:38.214] Memory mapped at address 0xffffa9c0d000. [2025-09-24 17:02:38.214] Read at address 0x00600018 (0xffffa9c0d018): 0x00000000 [2025-09-24 17:02:38.214] Write at address 0x00600018 (0xffffa9c0d018): 0x00400040, readback 0x00400040 [2025-09-24 17:02:38.310] Loaded PowerVR consumer services. [2025-09-24 17:02:38.470] Waiting data available... [2025-09-24 17:02:38.486] 512+0 records in [2025-09-24 17:02:38.502] 512+0 records out [2025-09-24 17:02:38.518] Starting syslogd/klogd: done [2025-09-24 17:02:38.534] DML Start [2025-09-24 17:02:38.725] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:02:38.966] DML res1: 0 [2025-09-24 17:02:39.365] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:02:39.386] Read Success [2025-09-24 17:02:39.386] Verifying certificate... [2025-09-24 17:02:39.642] Verified OK [2025-09-24 17:02:39.658] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:02:41.417] Verified OK [2025-09-24 17:02:41.417] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:02:41.967] Verified OK [2025-09-24 17:02:41.967] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:02:44.430] fs.protected_hardlinks = 1 [2025-09-24 17:02:44.446] fs.protected_symlinks = 1 [2025-09-24 17:02:44.446] kernel.modules_disabled = 1 [2025-09-24 17:02:44.653] [2025-09-24 17:02:44.653] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:02:46.051] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:02:53.722] SBL1:1210.0.1.0 [2025-09-24 17:02:53.754] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:02:55.337] SBL2:1210.0.1.0 [2025-09-24 17:02:55.369] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:02:55.481] j-A [2025-09-24 17:03:02.855] The R5 Autosar Classic is running [2025-09-24 17:03:02.855] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:03:02.855] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:03:03.462] INIT: version 2.96 booting [2025-09-24 17:03:03.574] INIT: Entering runlevel: 5 [2025-09-24 17:03:03.734] mtd24 attached [2025-09-24 17:03:03.734] mtd32 attached [2025-09-24 17:03:03.750] mtd28 attached [2025-09-24 17:03:03.798] RTNETLINK answers: File exists [2025-09-24 17:03:03.842] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:03:03.842] ubi0:textures is mounted. [2025-09-24 17:03:03.842] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:03:03.842] ubi1:dml_code is mounted. [2025-09-24 17:03:03.842] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:03:03.842] ubi2:animations is mounted. [2025-09-24 17:03:03.842] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:03:03.842] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:03:03.868] data.LB_FadeInType0=100 [2025-09-24 17:03:03.868] data.CHLH_FadeInType0=0 [2025-09-24 17:03:03.868] data.WU_FadeInDelay=0 [2025-09-24 17:03:03.868] max_time_out=0 [2025-09-24 17:03:03.868] No splash screen [2025-09-24 17:03:03.868] stop dss Done [2025-09-24 17:03:03.959] /dev/mem opened. [2025-09-24 17:03:03.959] Memory mapped at address 0xffffbd7f3000. [2025-09-24 17:03:03.959] Read at address 0x00600018 (0xffffbd7f3018): 0x00000000 [2025-09-24 17:03:03.959] Write at address 0x00600018 (0xffffbd7f3018): 0x00400040, readback 0x00400040 [2025-09-24 17:03:03.959] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:03:03.959] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:03:04.151] Loaded PowerVR consumer services. [2025-09-24 17:03:04.244] Waiting data available... [2025-09-24 17:03:04.244] 512+0 records in [2025-09-24 17:03:04.244] 512+0 records out [2025-09-24 17:03:04.276] Starting syslogd/klogd: done [2025-09-24 17:03:04.292] DML Start [2025-09-24 17:03:04.484] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:03:04.675] DML res1: 0 [2025-09-24 17:03:05.091] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:03:05.112] Read Success [2025-09-24 17:03:05.112] Verifying certificate... [2025-09-24 17:03:05.352] Verified OK [2025-09-24 17:03:05.368] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:03:07.185] Verified OK [2025-09-24 17:03:07.185] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:03:07.722] Verified OK [2025-09-24 17:03:07.722] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:03:10.293] fs.protected_hardlinks = 1 [2025-09-24 17:03:10.293] fs.protected_symlinks = 1 [2025-09-24 17:03:10.294] kernel.modules_disabled = 1 [2025-09-24 17:03:10.486] [2025-09-24 17:03:10.486] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:03:11.701] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:03:19.430] SBL1:1210.0.1.0 [2025-09-24 17:03:19.478] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:03:21.045] SBL2:1210.0.1.0 [2025-09-24 17:03:21.092] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:03:21.188] j-A [2025-09-24 17:03:28.542] The R5 Autosar Classic is running [2025-09-24 17:03:28.566] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:03:28.566] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:03:29.173] INIT: version 2.96 booting [2025-09-24 17:03:29.286] INIT: Entering runlevel: 5 [2025-09-24 17:03:29.429] mtd24 attached [2025-09-24 17:03:29.445] mtd28 attached [2025-09-24 17:03:29.461] mtd32 attached [2025-09-24 17:03:29.542] RTNETLINK answers: File exists [2025-09-24 17:03:29.542] ubi0:textures is mounted. [2025-09-24 17:03:29.542] ubi1:animations is mounted. [2025-09-24 17:03:29.542] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:03:29.542] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:03:29.542] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:03:29.542] ubi2:dml_code is mounted. [2025-09-24 17:03:29.542] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:03:29.542] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:03:29.568] data.LB_FadeInType0=100 [2025-09-24 17:03:29.568] data.CHLH_FadeInType0=0 [2025-09-24 17:03:29.568] data.WU_FadeInDelay=0 [2025-09-24 17:03:29.568] max_time_out=0 [2025-09-24 17:03:29.568] No splash screen [2025-09-24 17:03:29.568] stop dss Done [2025-09-24 17:03:29.594] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:03:29.594] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:03:29.635] /dev/mem opened. [2025-09-24 17:03:29.635] Memory mapped at address 0xffffbad4c000. [2025-09-24 17:03:29.635] Read at address 0x00600018 (0xffffbad4c018): 0x00000000 [2025-09-24 17:03:29.635] Write at address 0x00600018 (0xffffbad4c018): 0x00400040, readback 0x00400040 [2025-09-24 17:03:29.762] Loaded PowerVR consumer services. [2025-09-24 17:03:29.907] Waiting data available... [2025-09-24 17:03:29.923] 512+0 records in [2025-09-24 17:03:29.923] 512+0 records out [2025-09-24 17:03:29.955] Starting syslogd/klogd: done [2025-09-24 17:03:29.971] DML Start [2025-09-24 17:03:30.147] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:03:30.339] DML res1: 0 [2025-09-24 17:03:30.840] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:03:30.840] Read Success [2025-09-24 17:03:30.840] Verifying certificate... [2025-09-24 17:03:31.127] Verified OK [2025-09-24 17:03:31.175] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:03:32.883] Verified OK [2025-09-24 17:03:32.883] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:03:33.426] Verified OK [2025-09-24 17:03:33.426] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:03:35.963] fs.protected_hardlinks = 1 [2025-09-24 17:03:35.963] fs.protected_symlinks = 1 [2025-09-24 17:03:35.963] kernel.modules_disabled = 1 [2025-09-24 17:03:36.139] [2025-09-24 17:03:36.139] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:03:37.440] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:03:45.149] SBL1:1210.0.1.0 [2025-09-24 17:03:45.197] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:03:46.763] SBL2:1210.0.1.0 [2025-09-24 17:03:46.811] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:03:46.923] j-A [2025-09-24 17:03:54.294] The R5 Autosar Classic is running [2025-09-24 17:03:54.294] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:03:54.294] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:03:54.901] INIT: version 2.96 booting [2025-09-24 17:03:55.013] INIT: Entering runlevel: 5 [2025-09-24 17:03:55.173] mtd32 attached [2025-09-24 17:03:55.173] mtd24 attached [2025-09-24 17:03:55.189] mtd28 attached [2025-09-24 17:03:55.205] ubi0:dml_code is mounted. [2025-09-24 17:03:55.237] RTNETLINK answers: File exists [2025-09-24 17:03:55.276] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:03:55.276] ubi1:textures is mounted. [2025-09-24 17:03:55.276] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:03:55.276] ubi2:animations is mounted. [2025-09-24 17:03:55.276] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:03:55.276] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:03:55.276] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:03:55.302] data.LB_FadeInType0=100 [2025-09-24 17:03:55.302] data.CHLH_FadeInType0=0 [2025-09-24 17:03:55.302] data.WU_FadeInDelay=0 [2025-09-24 17:03:55.302] max_time_out=0 [2025-09-24 17:03:55.302] No splash screen [2025-09-24 17:03:55.302] stop dss Done [2025-09-24 17:03:55.372] /dev/mem opened. [2025-09-24 17:03:55.372] Memory mapped at address 0xffffb34cf000. [2025-09-24 17:03:55.372] Read at address 0x00600018 (0xffffb34cf018): 0x00000000 [2025-09-24 17:03:55.372] Write at address 0x00600018 (0xffffb34cf018): 0x00400040, readback 0x00400040 [2025-09-24 17:03:55.372] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:03:55.388] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:03:55.499] Loaded PowerVR consumer services. [2025-09-24 17:03:55.644] Waiting data available... [2025-09-24 17:03:55.676] 512+0 records in [2025-09-24 17:03:55.676] 512+0 records out [2025-09-24 17:03:55.724] Starting syslogd/klogd: done [2025-09-24 17:03:55.740] DML Start [2025-09-24 17:03:55.900] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:03:56.091] DML res1: 0 [2025-09-24 17:03:56.570] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:03:56.591] Read Success [2025-09-24 17:03:56.591] Verifying certificate... [2025-09-24 17:03:56.832] Verified OK [2025-09-24 17:03:56.832] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:03:58.350] Verified OK [2025-09-24 17:03:58.350] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:03:58.979] Verified OK [2025-09-24 17:03:58.979] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:04:01.585] fs.protected_hardlinks = 1 [2025-09-24 17:04:01.585] fs.protected_symlinks = 1 [2025-09-24 17:04:01.600] kernel.modules_disabled = 1 [2025-09-24 17:04:01.793] [2025-09-24 17:04:01.793] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:04:03.183] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:04:10.870] SBL1:1210.0.1.0 [2025-09-24 17:04:10.918] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:04:12.485] SBL2:1210.0.1.0 [2025-09-24 17:04:12.533] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:04:12.645] j-A [2025-09-24 17:04:19.983] The R5 Autosar Classic is running [2025-09-24 17:04:20.009] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:04:20.009] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:04:20.616] INIT: version 2.96 booting [2025-09-24 17:04:20.728] INIT: Entering runlevel: 5 [2025-09-24 17:04:20.888] mtd24 attached [2025-09-24 17:04:20.904] mtd28 attached [2025-09-24 17:04:20.904] mtd32 attached [2025-09-24 17:04:20.952] ubi0:textures is mounted. [2025-09-24 17:04:20.952] RTNETLINK answers: File exists [2025-09-24 17:04:21.019] ubi2:dml_code is mounted. [2025-09-24 17:04:21.019] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:04:21.019] ubi1:animations is mounted. [2025-09-24 17:04:21.019] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:04:21.019] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:04:21.019] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:04:21.019] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:04:21.019] data.LB_FadeInType0=100 [2025-09-24 17:04:21.019] data.CHLH_FadeInType0=0 [2025-09-24 17:04:21.019] data.WU_FadeInDelay=0 [2025-09-24 17:04:21.019] max_time_out=0 [2025-09-24 17:04:21.019] No splash screen [2025-09-24 17:04:21.019] stop dss Done [2025-09-24 17:04:21.050] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:04:21.086] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:04:21.086] /dev/mem opened. [2025-09-24 17:04:21.086] Memory mapped at address 0xffff9b99c000. [2025-09-24 17:04:21.086] Read at address 0x00600018 (0xffff9b99c018): 0x00000000 [2025-09-24 17:04:21.086] Write at address 0x00600018 (0xffff9b99c018): 0x00400040, readback 0x00400040 [2025-09-24 17:04:21.215] Loaded PowerVR consumer services. [2025-09-24 17:04:21.358] Waiting data available... [2025-09-24 17:04:21.374] 512+0 records in [2025-09-24 17:04:21.374] 512+0 records out [2025-09-24 17:04:21.422] Starting syslogd/klogd: done [2025-09-24 17:04:21.438] DML Start [2025-09-24 17:04:21.599] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:04:21.838] DML res1: 0 [2025-09-24 17:04:22.344] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:04:22.344] Read Success [2025-09-24 17:04:22.344] Verifying certificate... [2025-09-24 17:04:22.600] Verified OK [2025-09-24 17:04:22.600] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:04:24.177] Verified OK [2025-09-24 17:04:24.177] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:04:24.872] Verified OK [2025-09-24 17:04:24.872] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:04:27.525] fs.protected_hardlinks = 1 [2025-09-24 17:04:27.542] fs.protected_symlinks = 1 [2025-09-24 17:04:27.558] kernel.modules_disabled = 1 [2025-09-24 17:04:27.749] [2025-09-24 17:04:27.749] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:04:28.880] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:04:36.567] SBL1:1210.0.1.0 [2025-09-24 17:04:36.615] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:04:38.181] SBL2:1210.0.1.0 [2025-09-24 17:04:38.229] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:04:38.341] j-A [2025-09-24 17:04:45.711] The R5 Autosar Classic is running [2025-09-24 17:04:45.711] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:04:45.711] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:04:46.318] INIT: version 2.96 booting [2025-09-24 17:04:46.431] INIT: Entering runlevel: 5 [2025-09-24 17:04:46.574] mtd32 attached [2025-09-24 17:04:46.590] mtd24 attached [2025-09-24 17:04:46.590] mtd28 attached [2025-09-24 17:04:46.654] RTNETLINK answers: File exists [2025-09-24 17:04:46.719] ubi0:dml_code is mounted. [2025-09-24 17:04:46.719] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:04:46.719] ubi1:textures is mounted. [2025-09-24 17:04:46.719] ubi2:animations is mounted. [2025-09-24 17:04:46.719] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:04:46.719] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:04:46.719] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:04:46.719] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:04:46.719] data.LB_FadeInType0=100 [2025-09-24 17:04:46.719] data.CHLH_FadeInType0=0 [2025-09-24 17:04:46.719] data.WU_FadeInDelay=0 [2025-09-24 17:04:46.719] max_time_out=0 [2025-09-24 17:04:46.719] No splash screen [2025-09-24 17:04:46.719] stop dss Done [2025-09-24 17:04:46.799] /dev/mem opened. [2025-09-24 17:04:46.799] Memory mapped at address 0xffffbdaf8000. [2025-09-24 17:04:46.799] Read at address 0x00600018 (0xffffbdaf8018): 0x00000000 [2025-09-24 17:04:46.799] Write at address 0x00600018 (0xffffbdaf8018): 0x00400040, readback 0x00400040 [2025-09-24 17:04:46.799] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:04:46.799] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:04:47.055] Loaded PowerVR consumer services. [2025-09-24 17:04:47.071] Waiting data available... [2025-09-24 17:04:47.087] 512+0 records in [2025-09-24 17:04:47.087] 512+0 records out [2025-09-24 17:04:47.135] Starting syslogd/klogd: done [2025-09-24 17:04:47.151] DML Start [2025-09-24 17:04:47.311] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:04:47.550] DML res1: 0 [2025-09-24 17:04:47.950] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:04:47.966] Read Success [2025-09-24 17:04:47.966] Verifying certificate... [2025-09-24 17:04:48.174] Verified OK [2025-09-24 17:04:48.190] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:04:49.924] Verified OK [2025-09-24 17:04:49.924] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:04:50.562] Verified OK [2025-09-24 17:04:50.562] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:04:53.215] fs.protected_hardlinks = 1 [2025-09-24 17:04:53.231] fs.protected_symlinks = 1 [2025-09-24 17:04:53.231] kernel.modules_disabled = 1 [2025-09-24 17:04:53.407] [2025-09-24 17:04:53.407] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:04:54.555] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:05:02.325] SBL1:1210.0.1.0 [2025-09-24 17:05:02.373] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:05:03.941] SBL2:1210.0.1.0 [2025-09-24 17:05:03.989] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:05:04.100] j-A [2025-09-24 17:05:11.439] The R5 Autosar Classic is running [2025-09-24 17:05:11.470] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:05:11.470] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:05:12.093] INIT: version 2.96 booting [2025-09-24 17:05:12.205] INIT: Entering runlevel: 5 [2025-09-24 17:05:12.365] mtd28 attached [2025-09-24 17:05:12.365] mtd32 attached [2025-09-24 17:05:12.381] mtd24 attached [2025-09-24 17:05:12.428] RTNETLINK answers: File exists [2025-09-24 17:05:12.495] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:05:12.495] ubi0:animations is mounted. [2025-09-24 17:05:12.495] ubi1:dml_code is mounted. [2025-09-24 17:05:12.495] ubi2:textures is mounted. [2025-09-24 17:05:12.495] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:05:12.495] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:05:12.495] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:05:12.495] data.LB_FadeInType0=100 [2025-09-24 17:05:12.495] data.CHLH_FadeInType0=0 [2025-09-24 17:05:12.495] data.WU_FadeInDelay=0 [2025-09-24 17:05:12.495] max_time_out=0 [2025-09-24 17:05:12.495] No splash screen [2025-09-24 17:05:12.495] stop dss Done [2025-09-24 17:05:12.495] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:05:12.526] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:05:12.563] /dev/mem opened. [2025-09-24 17:05:12.563] Memory mapped at address 0xffff81637000. [2025-09-24 17:05:12.563] Read at address 0x00600018 (0xffff81637018): 0x00000000 [2025-09-24 17:05:12.563] Write at address 0x00600018 (0xffff81637018): 0x00400040, readback 0x00400040 [2025-09-24 17:05:12.563] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:05:12.723] Loaded PowerVR consumer services. [2025-09-24 17:05:12.851] Waiting data available... [2025-09-24 17:05:12.882] 512+0 records in [2025-09-24 17:05:12.882] 512+0 records out [2025-09-24 17:05:12.914] Starting syslogd/klogd: done [2025-09-24 17:05:12.931] DML Start [2025-09-24 17:05:13.107] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:05:13.314] DML res1: 0 [2025-09-24 17:05:13.803] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:05:13.803] Read Success [2025-09-24 17:05:13.803] Verifying certificate... [2025-09-24 17:05:14.042] Verified OK [2025-09-24 17:05:14.058] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:05:15.829] Verified OK [2025-09-24 17:05:15.829] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:05:16.363] Verified OK [2025-09-24 17:05:16.363] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:05:18.905] fs.protected_hardlinks = 1 [2025-09-24 17:05:18.921] fs.protected_symlinks = 1 [2025-09-24 17:05:18.921] kernel.modules_disabled = 1 [2025-09-24 17:05:19.129] [2025-09-24 17:05:19.129] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:05:20.340] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:05:28.069] SBL1:1210.0.1.0 [2025-09-24 17:05:28.117] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:05:29.684] SBL2:1210.0.1.0 [2025-09-24 17:05:29.732] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:05:29.827] j-A [2025-09-24 17:05:37.182] The R5 Autosar Classic is running [2025-09-24 17:05:37.205] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:05:37.205] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:05:37.812] INIT: version 2.96 booting [2025-09-24 17:05:37.924] INIT: Entering runlevel: 5 [2025-09-24 17:05:38.068] mtd24 attached [2025-09-24 17:05:38.084] mtd32 attached [2025-09-24 17:05:38.100] mtd28 attached [2025-09-24 17:05:38.149] ubi0:textures is mounted. [2025-09-24 17:05:38.149] RTNETLINK answers: File exists [2025-09-24 17:05:38.184] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:05:38.184] ubi1:dml_code is mounted. [2025-09-24 17:05:38.184] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:05:38.184] ubi2:animations is mounted. [2025-09-24 17:05:38.184] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:05:38.184] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:05:38.184] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:05:38.211] data.LB_FadeInType0=100 [2025-09-24 17:05:38.211] data.CHLH_FadeInType0=0 [2025-09-24 17:05:38.211] data.WU_FadeInDelay=0 [2025-09-24 17:05:38.211] max_time_out=0 [2025-09-24 17:05:38.211] No splash screen [2025-09-24 17:05:38.211] stop dss Done [2025-09-24 17:05:38.227] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:05:38.243] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:05:38.259] /dev/mem opened. [2025-09-24 17:05:38.285] Memory mapped at address 0xffff8caf5000. [2025-09-24 17:05:38.285] Read at address 0x00600018 (0xffff8caf5018): 0x00000000 [2025-09-24 17:05:38.285] Write at address 0x00600018 (0xffff8caf5018): 0x00400040, readback 0x00400040 [2025-09-24 17:05:38.397] Loaded PowerVR consumer services. [2025-09-24 17:05:38.557] Waiting data available... [2025-09-24 17:05:38.573] 512+0 records in [2025-09-24 17:05:38.573] 512+0 records out [2025-09-24 17:05:38.621] Starting syslogd/klogd: done [2025-09-24 17:05:38.637] DML Start [2025-09-24 17:05:38.796] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:05:38.989] DML res1: 0 [2025-09-24 17:05:39.453] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:05:39.473] Read Success [2025-09-24 17:05:39.473] Verifying certificate... [2025-09-24 17:05:39.746] Verified OK [2025-09-24 17:05:39.761] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:05:41.467] Verified OK [2025-09-24 17:05:41.467] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:05:41.990] Verified OK [2025-09-24 17:05:41.990] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:05:44.405] fs.protected_hardlinks = 1 [2025-09-24 17:05:44.405] fs.protected_symlinks = 1 [2025-09-24 17:05:44.420] kernel.modules_disabled = 1 [2025-09-24 17:05:44.596] [2025-09-24 17:05:44.596] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:05:46.070] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:05:53.801] SBL1:1210.0.1.0 [2025-09-24 17:05:53.833] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:05:55.417] SBL2:1210.0.1.0 [2025-09-24 17:05:55.449] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:05:55.561] j-A [2025-09-24 17:06:02.915] The R5 Autosar Classic is running [2025-09-24 17:06:02.915] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:06:02.936] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:06:03.543] INIT: version 2.96 booting [2025-09-24 17:06:03.656] INIT: Entering runlevel: 5 [2025-09-24 17:06:03.815] mtd28 attached [2025-09-24 17:06:03.815] mtd32 attached [2025-09-24 17:06:03.831] mtd24 attached [2025-09-24 17:06:03.863] ubi0:animations is mounted. [2025-09-24 17:06:03.879] RTNETLINK answers: File exists [2025-09-24 17:06:03.939] ubi1:dml_code is mounted. [2025-09-24 17:06:03.939] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:06:03.939] ubi2:textures is mounted. [2025-09-24 17:06:03.939] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:06:03.939] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:06:03.939] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:06:03.939] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:06:03.939] data.LB_FadeInType0=100 [2025-09-24 17:06:03.939] data.CHLH_FadeInType0=0 [2025-09-24 17:06:03.939] data.WU_FadeInDelay=0 [2025-09-24 17:06:03.939] max_time_out=0 [2025-09-24 17:06:03.939] No splash screen [2025-09-24 17:06:03.939] stop dss Done [2025-09-24 17:06:04.010] /dev/mem opened. [2025-09-24 17:06:04.010] Memory mapped at address 0xffff9f5af000. [2025-09-24 17:06:04.010] Read at address 0x00600018 (0xffff9f5af018): 0x00000000 [2025-09-24 17:06:04.010] Write at address 0x00600018 (0xffff9f5af018): 0x00400040, readback 0x00400040 [2025-09-24 17:06:04.010] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:06:04.010] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:06:04.107] Loaded PowerVR consumer services. [2025-09-24 17:06:04.267] Waiting data available... [2025-09-24 17:06:04.299] 512+0 records in [2025-09-24 17:06:04.299] 512+0 records out [2025-09-24 17:06:04.331] Starting syslogd/klogd: done [2025-09-24 17:06:04.347] DML Start [2025-09-24 17:06:04.523] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:06:04.762] DML res1: 0 [2025-09-24 17:06:05.179] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:06:05.202] Read Success [2025-09-24 17:06:05.202] Verifying certificate... [2025-09-24 17:06:05.426] Verified OK [2025-09-24 17:06:05.442] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:06:07.073] Verified OK [2025-09-24 17:06:07.073] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:06:07.696] Verified OK [2025-09-24 17:06:07.696] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:06:10.364] fs.protected_hardlinks = 1 [2025-09-24 17:06:10.364] fs.protected_symlinks = 1 [2025-09-24 17:06:10.364] kernel.modules_disabled = 1 [2025-09-24 17:06:10.556] [2025-09-24 17:06:10.556] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:06:11.845] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:06:19.496] SBL1:1210.0.1.0 [2025-09-24 17:06:19.544] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:06:21.111] SBL2:1210.0.1.0 [2025-09-24 17:06:21.159] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:06:21.254] j-A [2025-09-24 17:06:28.609] The R5 Autosar Classic is running [2025-09-24 17:06:28.633] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:06:28.633] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:06:29.240] INIT: version 2.96 booting [2025-09-24 17:06:29.353] INIT: Entering runlevel: 5 [2025-09-24 17:06:29.512] mtd28 attached [2025-09-24 17:06:29.512] mtd24 attached [2025-09-24 17:06:29.528] mtd32 attached [2025-09-24 17:06:29.560] ubi0:animations is mounted. [2025-09-24 17:06:29.644] RTNETLINK answers: File exists [2025-09-24 17:06:29.644] ubi2:dml_code is mounted. [2025-09-24 17:06:29.644] ubi1:textures is mounted. [2025-09-24 17:06:29.644] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:06:29.644] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:06:29.644] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:06:29.644] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:06:29.644] data.LB_FadeInType0=100 [2025-09-24 17:06:29.644] data.CHLH_FadeInType0=0 [2025-09-24 17:06:29.644] data.WU_FadeInDelay=0 [2025-09-24 17:06:29.644] max_time_out=0 [2025-09-24 17:06:29.644] No splash screen [2025-09-24 17:06:29.644] stop dss Done [2025-09-24 17:06:29.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:06:29.718] /dev/mem opened. [2025-09-24 17:06:29.718] Memory mapped at address 0xffffa029f000. [2025-09-24 17:06:29.718] Read at address 0x00600018 (0xffffa029f018): 0x00000000 [2025-09-24 17:06:29.718] Write at address 0x00600018 (0xffffa029f018): 0x00400040, readback 0x00400040 [2025-09-24 17:06:29.718] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:06:29.734] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:06:29.831] Loaded PowerVR consumer services. [2025-09-24 17:06:29.990] Waiting data available... [2025-09-24 17:06:30.006] 512+0 records in [2025-09-24 17:06:30.006] 512+0 records out [2025-09-24 17:06:30.054] Starting syslogd/klogd: done [2025-09-24 17:06:30.070] DML Start [2025-09-24 17:06:30.246] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:06:30.470] DML res1: 0 [2025-09-24 17:06:30.954] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:06:30.954] Read Success [2025-09-24 17:06:30.954] Verifying certificate... [2025-09-24 17:06:31.210] Verified OK [2025-09-24 17:06:31.242] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:06:32.841] Verified OK [2025-09-24 17:06:32.841] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:06:33.448] Verified OK [2025-09-24 17:06:33.448] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:06:36.038] fs.protected_hardlinks = 1 [2025-09-24 17:06:36.068] fs.protected_symlinks = 1 [2025-09-24 17:06:36.068] kernel.modules_disabled = 1 [2025-09-24 17:06:36.260] [2025-09-24 17:06:36.260] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:06:37.583] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:06:45.213] SBL1:1210.0.1.0 [2025-09-24 17:06:45.245] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:06:46.827] SBL2:1210.0.1.0 [2025-09-24 17:06:46.859] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:06:46.972] j-A [2025-09-24 17:06:54.326] The R5 Autosar Classic is running [2025-09-24 17:06:54.326] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:06:54.347] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:06:54.954] INIT: version 2.96 booting [2025-09-24 17:06:55.066] INIT: Entering runlevel: 5 [2025-09-24 17:06:55.226] mtd24 attached [2025-09-24 17:06:55.226] mtd28 attached [2025-09-24 17:06:55.241] mtd32 attached [2025-09-24 17:06:55.349] ubi0:textures is mounted. [2025-09-24 17:06:55.349] RTNETLINK answers: File exists [2025-09-24 17:06:55.349] ubi1:animations is mounted. [2025-09-24 17:06:55.349] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:06:55.349] ubi2:dml_code is mounted. [2025-09-24 17:06:55.349] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:06:55.349] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:06:55.349] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:06:55.349] data.LB_FadeInType0=100 [2025-09-24 17:06:55.349] data.CHLH_FadeInType0=0 [2025-09-24 17:06:55.349] data.WU_FadeInDelay=0 [2025-09-24 17:06:55.349] max_time_out=0 [2025-09-24 17:06:55.349] No splash screen [2025-09-24 17:06:55.349] stop dss Done [2025-09-24 17:06:55.349] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:06:55.444] /dev/mem opened. [2025-09-24 17:06:55.444] Memory mapped at address 0xffff9dfff000. [2025-09-24 17:06:55.444] Read at address 0x00600018 (0xffff9dfff018): 0x00000000 [2025-09-24 17:06:55.444] Write at address 0x00600018 (0xffff9dfff018): 0x00400040, readback 0x00400040 [2025-09-24 17:06:55.444] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:06:55.444] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:06:55.636] Loaded PowerVR consumer services. [2025-09-24 17:06:55.684] Waiting data available... [2025-09-24 17:06:55.700] 512+0 records in [2025-09-24 17:06:55.700] 512+0 records out [2025-09-24 17:06:55.747] Starting syslogd/klogd: done [2025-09-24 17:06:55.763] DML Start [2025-09-24 17:06:55.940] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:06:56.164] DML res1: 0 [2025-09-24 17:06:56.589] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:06:56.589] Read Success [2025-09-24 17:06:56.589] Verifying certificate... [2025-09-24 17:06:56.828] Verified OK [2025-09-24 17:06:56.844] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:06:58.370] Verified OK [2025-09-24 17:06:58.370] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:06:59.006] Verified OK [2025-09-24 17:06:59.006] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:07:01.709] fs.protected_hardlinks = 1 [2025-09-24 17:07:01.709] fs.protected_symlinks = 1 [2025-09-24 17:07:01.724] kernel.modules_disabled = 1 [2025-09-24 17:07:01.916] [2025-09-24 17:07:01.916] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:07:03.195] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:07:10.940] SBL1:1210.0.1.0 [2025-09-24 17:07:10.987] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:07:12.554] SBL2:1210.0.1.0 [2025-09-24 17:07:12.602] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:07:12.714] j-A [2025-09-24 17:07:20.083] The R5 Autosar Classic is running [2025-09-24 17:07:20.083] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:07:20.083] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:07:20.690] INIT: version 2.96 booting [2025-09-24 17:07:20.803] INIT: Entering runlevel: 5 [2025-09-24 17:07:20.962] mtd24 attached [2025-09-24 17:07:20.962] mtd28 attached [2025-09-24 17:07:20.994] mtd32 attached [2025-09-24 17:07:21.026] ubi0:textures is mounted. [2025-09-24 17:07:21.026] ubi1:animations is mounted. [2025-09-24 17:07:21.042] RTNETLINK answers: File exists [2025-09-24 17:07:21.042] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:07:21.094] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:07:21.094] ubi2:dml_code is mounted. [2025-09-24 17:07:21.094] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:07:21.094] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:07:21.094] data.LB_FadeInType0=100 [2025-09-24 17:07:21.094] data.CHLH_FadeInType0=0 [2025-09-24 17:07:21.094] data.WU_FadeInDelay=0 [2025-09-24 17:07:21.094] max_time_out=0 [2025-09-24 17:07:21.094] No splash screen [2025-09-24 17:07:21.094] stop dss Done [2025-09-24 17:07:21.094] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:07:21.179] /dev/mem opened. [2025-09-24 17:07:21.180] Memory mapped at address 0xffffbd505000. [2025-09-24 17:07:21.180] Read at address 0x00600018 (0xffffbd505018): 0x00000000 [2025-09-24 17:07:21.180] Write at address 0x00600018 (0xffffbd505018): 0x00400040, readback 0x00400040 [2025-09-24 17:07:21.180] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:07:21.180] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:07:21.292] Loaded PowerVR consumer services. [2025-09-24 17:07:21.436] Waiting data available... [2025-09-24 17:07:21.451] 512+0 records in [2025-09-24 17:07:21.451] 512+0 records out [2025-09-24 17:07:21.467] Starting syslogd/klogd: done [2025-09-24 17:07:21.499] DML Start [2025-09-24 17:07:21.676] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:07:21.916] DML res1: 0 [2025-09-24 17:07:22.389] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:07:22.389] Read Success [2025-09-24 17:07:22.389] Verifying certificate... [2025-09-24 17:07:22.643] Verified OK [2025-09-24 17:07:22.676] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:07:24.383] Verified OK [2025-09-24 17:07:24.383] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:07:24.943] Verified OK [2025-09-24 17:07:24.943] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:07:27.436] fs.protected_hardlinks = 1 [2025-09-24 17:07:27.453] fs.protected_symlinks = 1 [2025-09-24 17:07:27.453] kernel.modules_disabled = 1 [2025-09-24 17:07:27.645] [2025-09-24 17:07:27.645] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:07:28.967] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:07:36.668] SBL1:1210.0.1.0 [2025-09-24 17:07:36.700] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:07:38.283] SBL2:1210.0.1.0 [2025-09-24 17:07:38.315] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:07:38.426] j-A [2025-09-24 17:07:45.780] The R5 Autosar Classic is running [2025-09-24 17:07:45.780] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:07:45.801] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:07:46.408] INIT: version 2.96 booting [2025-09-24 17:07:46.520] INIT: Entering runlevel: 5 [2025-09-24 17:07:46.665] mtd24 attached [2025-09-24 17:07:46.680] mtd32 attached [2025-09-24 17:07:46.680] mtd28 attached [2025-09-24 17:07:46.712] ubi0:textures is mounted. [2025-09-24 17:07:46.803] RTNETLINK answers: File exists [2025-09-24 17:07:46.803] ubi1:dml_code is mounted. [2025-09-24 17:07:46.803] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:07:46.803] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:07:46.803] ubi2:animations is mounted. [2025-09-24 17:07:46.803] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:07:46.803] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:07:46.803] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:07:46.803] data.LB_FadeInType0=100 [2025-09-24 17:07:46.803] data.CHLH_FadeInType0=0 [2025-09-24 17:07:46.803] data.WU_FadeInDelay=0 [2025-09-24 17:07:46.803] max_time_out=0 [2025-09-24 17:07:46.803] No splash screen [2025-09-24 17:07:46.803] stop dss Done [2025-09-24 17:07:46.851] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:07:46.851] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:07:46.883] /dev/mem opened. [2025-09-24 17:07:46.883] Memory mapped at address 0xffff88024000. [2025-09-24 17:07:46.883] Read at address 0x00600018 (0xffff88024018): 0x00000000 [2025-09-24 17:07:46.883] Write at address 0x00600018 (0xffff88024018): 0x00400040, readback 0x00400040 [2025-09-24 17:07:46.995] Loaded PowerVR consumer services. [2025-09-24 17:07:47.155] Waiting data available... [2025-09-24 17:07:47.155] 512+0 records in [2025-09-24 17:07:47.155] 512+0 records out [2025-09-24 17:07:47.187] Starting syslogd/klogd: done [2025-09-24 17:07:47.203] DML Start [2025-09-24 17:07:47.363] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:07:47.587] DML res1: 0 [2025-09-24 17:07:48.096] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:07:48.096] Read Success [2025-09-24 17:07:48.096] Verifying certificate... [2025-09-24 17:07:48.353] Verified OK [2025-09-24 17:07:48.368] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:07:50.047] Verified OK [2025-09-24 17:07:50.047] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:07:50.679] Verified OK [2025-09-24 17:07:50.679] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:07:53.270] fs.protected_hardlinks = 1 [2025-09-24 17:07:53.270] fs.protected_symlinks = 1 [2025-09-24 17:07:53.286] kernel.modules_disabled = 1 [2025-09-24 17:07:53.477] [2025-09-24 17:07:53.477] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:07:54.643] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:08:02.383] SBL1:1210.0.1.0 [2025-09-24 17:08:02.431] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:08:03.998] SBL2:1210.0.1.0 [2025-09-24 17:08:04.046] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:08:04.157] j-A [2025-09-24 17:08:11.495] The R5 Autosar Classic is running [2025-09-24 17:08:11.526] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:08:11.526] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:08:12.134] INIT: version 2.96 booting [2025-09-24 17:08:12.245] INIT: Entering runlevel: 5 [2025-09-24 17:08:12.388] mtd28 attached [2025-09-24 17:08:12.404] mtd32 attached [2025-09-24 17:08:12.420] mtd24 attached [2025-09-24 17:08:12.437] ubi0:animations is mounted. [2025-09-24 17:08:12.469] RTNETLINK answers: File exists [2025-09-24 17:08:12.469] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:08:12.501] ubi1:dml_code is mounted. [2025-09-24 17:08:12.501] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:08:12.501] ubi2:textures is mounted. [2025-09-24 17:08:12.501] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:08:12.501] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:08:12.501] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:08:12.522] data.LB_FadeInType0=100 [2025-09-24 17:08:12.522] data.CHLH_FadeInType0=0 [2025-09-24 17:08:12.522] data.WU_FadeInDelay=0 [2025-09-24 17:08:12.522] max_time_out=0 [2025-09-24 17:08:12.522] No splash screen [2025-09-24 17:08:12.522] stop dss Done [2025-09-24 17:08:12.589] /dev/mem opened. [2025-09-24 17:08:12.589] Memory mapped at address 0xffff846c1000. [2025-09-24 17:08:12.589] Read at address 0x00600018 (0xffff846c1018): 0x00000000 [2025-09-24 17:08:12.589] Write at address 0x00600018 (0xffff846c1018): 0x00400040, readback 0x00400040 [2025-09-24 17:08:12.589] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:08:12.605] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:08:12.765] Loaded PowerVR consumer services. [2025-09-24 17:08:12.876] Waiting data available... [2025-09-24 17:08:12.908] 512+0 records in [2025-09-24 17:08:12.908] 512+0 records out [2025-09-24 17:08:12.924] Starting syslogd/klogd: done [2025-09-24 17:08:12.956] DML Start [2025-09-24 17:08:13.117] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:08:13.308] DML res1: 0 [2025-09-24 17:08:13.876] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:08:13.876] Read Success [2025-09-24 17:08:13.876] Verifying certificate... [2025-09-24 17:08:14.195] Verified OK [2025-09-24 17:08:14.228] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:08:15.835] Verified OK [2025-09-24 17:08:15.835] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:08:16.395] Verified OK [2025-09-24 17:08:16.411] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:08:18.905] fs.protected_hardlinks = 1 [2025-09-24 17:08:18.921] fs.protected_symlinks = 1 [2025-09-24 17:08:18.921] kernel.modules_disabled = 1 [2025-09-24 17:08:19.113] [2025-09-24 17:08:19.113] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:08:20.350] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:08:28.124] SBL1:1210.0.1.0 [2025-09-24 17:08:28.172] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:08:29.740] SBL2:1210.0.1.0 [2025-09-24 17:08:29.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:08:29.884] j-A [2025-09-24 17:08:37.236] The R5 Autosar Classic is running [2025-09-24 17:08:37.261] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:08:37.261] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:08:37.869] INIT: version 2.96 booting [2025-09-24 17:08:37.981] INIT: Entering runlevel: 5 [2025-09-24 17:08:38.140] mtd24 attached [2025-09-24 17:08:38.140] mtd28 attached [2025-09-24 17:08:38.156] mtd32 attached [2025-09-24 17:08:38.204] RTNETLINK answers: File exists [2025-09-24 17:08:38.248] ubi0:textures is mounted. [2025-09-24 17:08:38.248] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:08:38.248] ubi1:animations is mounted. [2025-09-24 17:08:38.248] ubi2:dml_code is mounted. [2025-09-24 17:08:38.248] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:08:38.248] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:08:38.248] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:08:38.248] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:08:38.248] data.LB_FadeInType0=100 [2025-09-24 17:08:38.248] data.CHLH_FadeInType0=0 [2025-09-24 17:08:38.268] data.WU_FadeInDelay=0 [2025-09-24 17:08:38.268] max_time_out=0 [2025-09-24 17:08:38.268] No splash screen [2025-09-24 17:08:38.268] stop dss Done [2025-09-24 17:08:38.350] /dev/mem opened. [2025-09-24 17:08:38.350] Memory mapped at address 0xffff8f31f000. [2025-09-24 17:08:38.350] Read at address 0x00600018 (0xffff8f31f018): 0x00000000 [2025-09-24 17:08:38.350] Write at address 0x00600018 (0xffff8f31f018): 0x00400040, readback 0x00400040 [2025-09-24 17:08:38.350] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:08:38.366] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:08:38.525] Loaded PowerVR consumer services. [2025-09-24 17:08:38.622] Waiting data available... [2025-09-24 17:08:38.638] 512+0 records in [2025-09-24 17:08:38.638] 512+0 records out [2025-09-24 17:08:38.653] Starting syslogd/klogd: done [2025-09-24 17:08:38.685] DML Start [2025-09-24 17:08:38.829] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:08:39.037] DML res1: 0 [2025-09-24 17:08:39.564] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:08:39.581] Read Success [2025-09-24 17:08:39.581] Verifying certificate... [2025-09-24 17:08:39.868] Verified OK [2025-09-24 17:08:39.884] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:08:41.609] Verified OK [2025-09-24 17:08:41.609] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:08:42.231] Verified OK [2025-09-24 17:08:42.231] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:08:44.806] fs.protected_hardlinks = 1 [2025-09-24 17:08:44.806] fs.protected_symlinks = 1 [2025-09-24 17:08:44.821] kernel.modules_disabled = 1 [2025-09-24 17:08:45.013] [2025-09-24 17:08:45.013] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:08:46.094] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:08:53.834] SBL1:1210.0.1.0 [2025-09-24 17:08:53.882] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:08:55.449] SBL2:1210.0.1.0 [2025-09-24 17:08:55.497] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:08:55.609] j-A [2025-09-24 17:09:02.977] The R5 Autosar Classic is running [2025-09-24 17:09:02.977] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:09:02.977] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:09:03.584] INIT: version 2.96 booting [2025-09-24 17:09:03.696] INIT: Entering runlevel: 5 [2025-09-24 17:09:03.856] mtd32 attached [2025-09-24 17:09:03.856] mtd24 attached [2025-09-24 17:09:03.871] mtd28 attached [2025-09-24 17:09:03.919] ubi0:dml_code is mounted. [2025-09-24 17:09:03.919] RTNETLINK answers: File exists [2025-09-24 17:09:03.957] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:09:03.957] ubi2:animations is mounted. [2025-09-24 17:09:03.957] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:09:03.957] ubi1:textures is mounted. [2025-09-24 17:09:03.957] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:09:03.957] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:09:03.957] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:09:03.979] data.LB_FadeInType0=100 [2025-09-24 17:09:03.979] data.CHLH_FadeInType0=0 [2025-09-24 17:09:03.979] data.WU_FadeInDelay=0 [2025-09-24 17:09:03.979] max_time_out=0 [2025-09-24 17:09:03.979] No splash screen [2025-09-24 17:09:03.979] stop dss Done [2025-09-24 17:09:04.071] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:09:04.071] /dev/mem opened. [2025-09-24 17:09:04.071] Memory mapped at address 0xffff843ed000. [2025-09-24 17:09:04.071] Read at address 0x00600018 (0xffff843ed018): 0x00000000 [2025-09-24 17:09:04.071] Write at address 0x00600018 (0xffff843ed018): 0x00400040, readback 0x00400040 [2025-09-24 17:09:04.071] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:09:04.214] Loaded PowerVR consumer services. [2025-09-24 17:09:04.342] Waiting data available... [2025-09-24 17:09:04.342] 512+0 records in [2025-09-24 17:09:04.358] 512+0 records out [2025-09-24 17:09:04.390] Starting syslogd/klogd: done [2025-09-24 17:09:04.406] DML Start [2025-09-24 17:09:04.582] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:09:04.790] DML res1: 0 [2025-09-24 17:09:05.206] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:09:05.206] Read Success [2025-09-24 17:09:05.222] Verifying certificate... [2025-09-24 17:09:05.461] Verified OK [2025-09-24 17:09:05.477] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:09:07.012] Verified OK [2025-09-24 17:09:07.012] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:09:07.562] Verified OK [2025-09-24 17:09:07.562] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:09:10.373] fs.protected_hardlinks = 1 [2025-09-24 17:09:10.373] fs.protected_symlinks = 1 [2025-09-24 17:09:10.373] kernel.modules_disabled = 1 [2025-09-24 17:09:10.550] [2025-09-24 17:09:10.550] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:09:11.819] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:09:19.621] SBL1:1210.0.1.0 [2025-09-24 17:09:19.669] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:09:21.236] SBL2:1210.0.1.0 [2025-09-24 17:09:21.284] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:09:21.381] j-A [2025-09-24 17:09:28.733] The R5 Autosar Classic is running [2025-09-24 17:09:28.758] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:09:28.758] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:09:29.366] INIT: version 2.96 booting [2025-09-24 17:09:29.478] INIT: Entering runlevel: 5 [2025-09-24 17:09:29.638] mtd24 attached [2025-09-24 17:09:29.653] mtd32 attached [2025-09-24 17:09:29.653] mtd28 attached [2025-09-24 17:09:29.701] ubi0:textures is mounted. [2025-09-24 17:09:29.701] RTNETLINK answers: File exists [2025-09-24 17:09:29.745] ubi1:dml_code is mounted. [2025-09-24 17:09:29.745] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:09:29.745] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:09:29.745] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:09:29.745] ubi2:animations is mounted. [2025-09-24 17:09:29.745] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:09:29.745] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:09:29.773] data.LB_FadeInType0=100 [2025-09-24 17:09:29.773] data.CHLH_FadeInType0=0 [2025-09-24 17:09:29.773] data.WU_FadeInDelay=0 [2025-09-24 17:09:29.773] max_time_out=0 [2025-09-24 17:09:29.773] No splash screen [2025-09-24 17:09:29.773] stop dss Done [2025-09-24 17:09:29.854] /dev/mem opened. [2025-09-24 17:09:29.854] Memory mapped at address 0xffff992d4000. [2025-09-24 17:09:29.854] Read at address 0x00600018 (0xffff992d4018): 0x00000000 [2025-09-24 17:09:29.854] Write at address 0x00600018 (0xffff992d4018): 0x00400040, readback 0x00400040 [2025-09-24 17:09:29.854] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:09:29.854] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:09:30.110] Loaded PowerVR consumer services. [2025-09-24 17:09:30.126] Waiting data available... [2025-09-24 17:09:30.142] 512+0 records in [2025-09-24 17:09:30.142] 512+0 records out [2025-09-24 17:09:30.190] Starting syslogd/klogd: done [2025-09-24 17:09:30.206] DML Start [2025-09-24 17:09:30.366] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:09:30.574] DML res1: 0 [2025-09-24 17:09:31.037] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:09:31.054] Read Success [2025-09-24 17:09:31.054] Verifying certificate... [2025-09-24 17:09:31.357] Verified OK [2025-09-24 17:09:31.373] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:09:33.137] Verified OK [2025-09-24 17:09:33.137] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:09:33.724] Verified OK [2025-09-24 17:09:33.724] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:09:36.251] fs.protected_hardlinks = 1 [2025-09-24 17:09:36.266] fs.protected_symlinks = 1 [2025-09-24 17:09:36.266] kernel.modules_disabled = 1 [2025-09-24 17:09:36.458] [2025-09-24 17:09:36.458] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:09:37.630] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:09:45.354] SBL1:1210.0.1.0 [2025-09-24 17:09:45.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:09:46.970] SBL2:1210.0.1.0 [2025-09-24 17:09:47.017] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:09:47.113] j-A [2025-09-24 17:09:54.467] The R5 Autosar Classic is running [2025-09-24 17:09:54.490] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:09:54.490] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:09:55.097] INIT: version 2.96 booting [2025-09-24 17:09:55.208] INIT: Entering runlevel: 5 [2025-09-24 17:09:55.353] mtd32 attached [2025-09-24 17:09:55.369] mtd28 attached [2025-09-24 17:09:55.369] mtd24 attached [2025-09-24 17:09:55.433] ubi0:dml_code is mounted. [2025-09-24 17:09:55.433] RTNETLINK answers: File exists [2025-09-24 17:09:55.492] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:09:55.492] ubi1:animations is mounted. [2025-09-24 17:09:55.492] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:09:55.492] ubi2:textures is mounted. [2025-09-24 17:09:55.492] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:09:55.492] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:09:55.492] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:09:55.492] data.LB_FadeInType0=100 [2025-09-24 17:09:55.492] data.CHLH_FadeInType0=0 [2025-09-24 17:09:55.492] data.WU_FadeInDelay=0 [2025-09-24 17:09:55.492] max_time_out=0 [2025-09-24 17:09:55.492] No splash screen [2025-09-24 17:09:55.492] stop dss Done [2025-09-24 17:09:55.539] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:09:55.578] /dev/mem opened. [2025-09-24 17:09:55.578] Memory mapped at address 0xffff9caf1000. [2025-09-24 17:09:55.578] Read at address 0x00600018 (0xffff9caf1018): 0x00000000 [2025-09-24 17:09:55.578] Write at address 0x00600018 (0xffff9caf1018): 0x00400040, readback 0x00400040 [2025-09-24 17:09:55.578] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:09:55.802] Loaded PowerVR consumer services. [2025-09-24 17:09:55.835] Waiting data available... [2025-09-24 17:09:55.867] 512+0 records in [2025-09-24 17:09:55.867] 512+0 records out [2025-09-24 17:09:55.882] Starting syslogd/klogd: done [2025-09-24 17:09:55.914] DML Start [2025-09-24 17:09:56.090] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:09:56.314] DML res1: 0 [2025-09-24 17:09:56.788] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:09:56.788] Read Success [2025-09-24 17:09:56.788] Verifying certificate... [2025-09-24 17:09:57.012] Verified OK [2025-09-24 17:09:57.028] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:09:58.659] Verified OK [2025-09-24 17:09:58.659] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:09:59.336] Verified OK [2025-09-24 17:09:59.336] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:10:01.974] fs.protected_hardlinks = 1 [2025-09-24 17:10:01.989] fs.protected_symlinks = 1 [2025-09-24 17:10:01.989] kernel.modules_disabled = 1 [2025-09-24 17:10:02.198] [2025-09-24 17:10:02.198] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:10:03.307] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:10:11.078] SBL1:1210.0.1.0 [2025-09-24 17:10:11.110] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:10:12.692] SBL2:1210.0.1.0 [2025-09-24 17:10:12.724] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:10:12.836] j-A [2025-09-24 17:10:20.190] The R5 Autosar Classic is running [2025-09-24 17:10:20.190] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:10:20.211] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:10:20.818] INIT: version 2.96 booting [2025-09-24 17:10:20.930] INIT: Entering runlevel: 5 [2025-09-24 17:10:21.074] mtd24 attached [2025-09-24 17:10:21.090] mtd28 attached [2025-09-24 17:10:21.122] ubi0:textures is mounted. [2025-09-24 17:10:21.122] mtd32 attached [2025-09-24 17:10:21.138] ubi1:animations is mounted. [2025-09-24 17:10:21.154] RTNETLINK answers: File exists [2025-09-24 17:10:21.196] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:10:21.196] ubi2:dml_code is mounted. [2025-09-24 17:10:21.196] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:10:21.196] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:10:21.196] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:10:21.196] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:10:21.217] data.LB_FadeInType0=100 [2025-09-24 17:10:21.217] data.CHLH_FadeInType0=0 [2025-09-24 17:10:21.217] data.WU_FadeInDelay=0 [2025-09-24 17:10:21.217] max_time_out=0 [2025-09-24 17:10:21.217] No splash screen [2025-09-24 17:10:21.217] stop dss Done [2025-09-24 17:10:21.298] /dev/mem opened. [2025-09-24 17:10:21.298] Memory mapped at address 0xffff83906000. [2025-09-24 17:10:21.298] Read at address 0x00600018 (0xffff83906018): 0x00000000 [2025-09-24 17:10:21.298] Write at address 0x00600018 (0xffff83906018): 0x00400040, readback 0x00400040 [2025-09-24 17:10:21.298] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:10:21.314] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:10:21.426] Loaded PowerVR consumer services. [2025-09-24 17:10:21.570] Waiting data available... [2025-09-24 17:10:21.586] 512+0 records in [2025-09-24 17:10:21.586] 512+0 records out [2025-09-24 17:10:21.634] Starting syslogd/klogd: done [2025-09-24 17:10:21.650] DML Start [2025-09-24 17:10:21.825] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:10:22.033] DML res1: 0 [2025-09-24 17:10:22.497] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:10:22.513] Read Success [2025-09-24 17:10:22.513] Verifying certificate... [2025-09-24 17:10:22.752] Verified OK [2025-09-24 17:10:22.768] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:10:24.477] Verified OK [2025-09-24 17:10:24.477] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:10:25.041] Verified OK [2025-09-24 17:10:25.042] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:10:27.583] fs.protected_hardlinks = 1 [2025-09-24 17:10:27.583] fs.protected_symlinks = 1 [2025-09-24 17:10:27.599] kernel.modules_disabled = 1 [2025-09-24 17:10:27.791] [2025-09-24 17:10:27.791] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:10:29.084] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:10:36.785] SBL1:1210.0.1.0 [2025-09-24 17:10:36.833] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:10:38.400] SBL2:1210.0.1.0 [2025-09-24 17:10:38.448] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:10:38.544] j-A [2025-09-24 17:10:45.899] The R5 Autosar Classic is running [2025-09-24 17:10:45.921] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:10:45.921] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:10:46.528] INIT: version 2.96 booting [2025-09-24 17:10:46.639] INIT: Entering runlevel: 5 [2025-09-24 17:10:46.783] mtd24 attached [2025-09-24 17:10:46.799] mtd28 attached [2025-09-24 17:10:46.815] mtd32 attached [2025-09-24 17:10:46.848] ubi0:textures is mounted. [2025-09-24 17:10:46.864] RTNETLINK answers: File exists [2025-09-24 17:10:46.864] ubi1:animations is mounted. [2025-09-24 17:10:46.924] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:10:46.924] ubi2:dml_code is mounted. [2025-09-24 17:10:46.924] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:10:46.924] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:10:46.924] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:10:46.924] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:10:46.924] data.LB_FadeInType0=100 [2025-09-24 17:10:46.924] data.CHLH_FadeInType0=0 [2025-09-24 17:10:46.924] data.WU_FadeInDelay=0 [2025-09-24 17:10:46.924] max_time_out=0 [2025-09-24 17:10:46.924] No splash screen [2025-09-24 17:10:46.924] stop dss Done [2025-09-24 17:10:46.957] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:10:46.996] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:10:46.996] /dev/mem opened. [2025-09-24 17:10:46.996] Memory mapped at address 0xffffb4807000. [2025-09-24 17:10:46.996] Read at address 0x00600018 (0xffffb4807018): 0x00000000 [2025-09-24 17:10:46.996] Write at address 0x00600018 (0xffffb4807018): 0x00400040, readback 0x00400040 [2025-09-24 17:10:47.171] Loaded PowerVR consumer services. [2025-09-24 17:10:47.283] Waiting data available... [2025-09-24 17:10:47.299] 512+0 records in [2025-09-24 17:10:47.299] 512+0 records out [2025-09-24 17:10:47.347] Starting syslogd/klogd: done [2025-09-24 17:10:47.363] DML Start [2025-09-24 17:10:47.539] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:10:47.747] DML res1: 0 [2025-09-24 17:10:48.249] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:10:48.249] Read Success [2025-09-24 17:10:48.249] Verifying certificate... [2025-09-24 17:10:48.473] Verified OK [2025-09-24 17:10:48.489] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:10:50.247] Verified OK [2025-09-24 17:10:50.247] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:10:50.800] Verified OK [2025-09-24 17:10:50.800] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:10:53.342] fs.protected_hardlinks = 1 [2025-09-24 17:10:53.342] fs.protected_symlinks = 1 [2025-09-24 17:10:53.358] kernel.modules_disabled = 1 [2025-09-24 17:10:53.549] [2025-09-24 17:10:53.549] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:10:54.779] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:11:02.505] SBL1:1210.0.1.0 [2025-09-24 17:11:02.553] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:11:04.120] SBL2:1210.0.1.0 [2025-09-24 17:11:04.168] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:11:04.264] j-A [2025-09-24 17:11:11.619] The R5 Autosar Classic is running [2025-09-24 17:11:11.642] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:11:11.642] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:11:12.250] INIT: version 2.96 booting [2025-09-24 17:11:12.361] INIT: Entering runlevel: 5 [2025-09-24 17:11:12.522] mtd24 attached [2025-09-24 17:11:12.522] mtd32 attached [2025-09-24 17:11:12.537] mtd28 attached [2025-09-24 17:11:12.585] ubi0:textures is mounted. [2025-09-24 17:11:12.585] RTNETLINK answers: File exists [2025-09-24 17:11:12.644] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:11:12.644] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:11:12.644] ubi2:animations is mounted. [2025-09-24 17:11:12.644] ubi1:dml_code is mounted. [2025-09-24 17:11:12.644] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:11:12.644] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:11:12.644] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:11:12.644] data.LB_FadeInType0=100 [2025-09-24 17:11:12.644] data.CHLH_FadeInType0=0 [2025-09-24 17:11:12.644] data.WU_FadeInDelay=0 [2025-09-24 17:11:12.644] max_time_out=0 [2025-09-24 17:11:12.644] No splash screen [2025-09-24 17:11:12.644] stop dss Done [2025-09-24 17:11:12.687] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:11:12.687] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:11:12.726] /dev/mem opened. [2025-09-24 17:11:12.726] Memory mapped at address 0xffffa74d6000. [2025-09-24 17:11:12.726] Read at address 0x00600018 (0xffffa74d6018): 0x00000000 [2025-09-24 17:11:12.726] Write at address 0x00600018 (0xffffa74d6018): 0x00400040, readback 0x00400040 [2025-09-24 17:11:12.934] Loaded PowerVR consumer services. [2025-09-24 17:11:12.982] Waiting data available... [2025-09-24 17:11:13.014] 512+0 records in [2025-09-24 17:11:13.014] 512+0 records out [2025-09-24 17:11:13.046] Starting syslogd/klogd: done [2025-09-24 17:11:13.062] DML Start [2025-09-24 17:11:13.254] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:11:13.430] DML res1: 0 [2025-09-24 17:11:13.861] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:11:13.877] Read Success [2025-09-24 17:11:13.877] Verifying certificate... [2025-09-24 17:11:14.101] Verified OK [2025-09-24 17:11:14.117] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:11:15.838] Verified OK [2025-09-24 17:11:15.838] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:11:16.459] Verified OK [2025-09-24 17:11:16.459] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:11:19.080] fs.protected_hardlinks = 1 [2025-09-24 17:11:19.110] fs.protected_symlinks = 1 [2025-09-24 17:11:19.110] kernel.modules_disabled = 1 [2025-09-24 17:11:19.286] [2025-09-24 17:11:19.286] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:11:20.492] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:11:28.249] SBL1:1210.0.1.0 [2025-09-24 17:11:28.281] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:11:29.863] SBL2:1210.0.1.0 [2025-09-24 17:11:29.895] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:11:30.008] j-A [2025-09-24 17:11:37.383] The R5 Autosar Classic is running [2025-09-24 17:11:37.383] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:11:37.383] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:11:37.991] INIT: version 2.96 booting [2025-09-24 17:11:38.102] INIT: Entering runlevel: 5 [2025-09-24 17:11:38.262] mtd28 attached [2025-09-24 17:11:38.262] mtd24 attached [2025-09-24 17:11:38.294] ubi0:animations is mounted. [2025-09-24 17:11:38.310] mtd32 attached [2025-09-24 17:11:38.326] ubi1:textures is mounted. [2025-09-24 17:11:38.342] RTNETLINK answers: File exists [2025-09-24 17:11:38.342] ubi2:dml_code is mounted. [2025-09-24 17:11:38.392] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:11:38.392] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:11:38.392] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:11:38.392] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:11:38.392] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:11:38.392] data.LB_FadeInType0=100 [2025-09-24 17:11:38.392] data.CHLH_FadeInType0=0 [2025-09-24 17:11:38.392] data.WU_FadeInDelay=0 [2025-09-24 17:11:38.392] max_time_out=0 [2025-09-24 17:11:38.392] No splash screen [2025-09-24 17:11:38.392] stop dss Done [2025-09-24 17:11:38.462] /dev/mem opened. [2025-09-24 17:11:38.462] Memory mapped at address 0xffff9eff2000. [2025-09-24 17:11:38.462] Read at address 0x00600018 (0xffff9eff2018): 0x00000000 [2025-09-24 17:11:38.462] Write at address 0x00600018 (0xffff9eff2018): 0x00400040, readback 0x00400040 [2025-09-24 17:11:38.462] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:11:38.478] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:11:38.573] Loaded PowerVR consumer services. [2025-09-24 17:11:38.749] Waiting data available... [2025-09-24 17:11:38.765] 512+0 records in [2025-09-24 17:11:38.765] 512+0 records out [2025-09-24 17:11:38.797] Starting syslogd/klogd: done [2025-09-24 17:11:38.813] DML Start [2025-09-24 17:11:39.005] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:11:39.213] DML res1: 0 [2025-09-24 17:11:39.686] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:11:39.686] Read Success [2025-09-24 17:11:39.686] Verifying certificate... [2025-09-24 17:11:39.974] Verified OK [2025-09-24 17:11:40.022] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:11:41.716] Verified OK [2025-09-24 17:11:41.716] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:11:42.360] Verified OK [2025-09-24 17:11:42.360] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:11:44.967] fs.protected_hardlinks = 1 [2025-09-24 17:11:44.982] fs.protected_symlinks = 1 [2025-09-24 17:11:44.998] kernel.modules_disabled = 1 [2025-09-24 17:11:45.190] [2025-09-24 17:11:45.190] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:11:46.234] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:11:53.941] SBL1:1210.0.1.0 [2025-09-24 17:11:53.989] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:11:55.555] SBL2:1210.0.1.0 [2025-09-24 17:11:55.603] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:11:55.714] j-A [2025-09-24 17:12:03.087] The R5 Autosar Classic is running [2025-09-24 17:12:03.087] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:12:03.087] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:12:03.694] INIT: version 2.96 booting [2025-09-24 17:12:03.806] INIT: Entering runlevel: 5 [2025-09-24 17:12:03.950] mtd28 attached [2025-09-24 17:12:03.966] mtd32 attached [2025-09-24 17:12:03.982] mtd24 attached [2025-09-24 17:12:04.014] ubi0:animations is mounted. [2025-09-24 17:12:04.030] RTNETLINK answers: File exists [2025-09-24 17:12:04.030] ubi1:dml_code is mounted. [2025-09-24 17:12:04.087] ubi2:textures is mounted. [2025-09-24 17:12:04.087] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:12:04.087] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:12:04.087] data.LB_FadeInType0=100 [2025-09-24 17:12:04.087] data.CHLH_FadeInType0=0 [2025-09-24 17:12:04.087] data.WU_FadeInDelay=0 [2025-09-24 17:12:04.087] max_time_out=0 [2025-09-24 17:12:04.087] No splash screen [2025-09-24 17:12:04.087] stop dss Done [2025-09-24 17:12:04.087] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:12:04.087] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:12:04.087] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:12:04.134] /dev/mem opened. [2025-09-24 17:12:04.134] Memory mapped at address 0xffff8629e000. [2025-09-24 17:12:04.179] Read at address 0x00600018 (0xffff8629e018): 0x00000000 [2025-09-24 17:12:04.179] Write at address 0x00600018 (0xffff8629e018): 0x00400040, readback 0x00400040 [2025-09-24 17:12:04.179] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:12:04.179] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:12:04.435] Loaded PowerVR consumer services. [2025-09-24 17:12:04.451] Waiting data available... [2025-09-24 17:12:04.467] 512+0 records in [2025-09-24 17:12:04.467] 512+0 records out [2025-09-24 17:12:04.499] Starting syslogd/klogd: done [2025-09-24 17:12:04.515] DML Start [2025-09-24 17:12:04.690] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:12:04.946] DML res1: 0 [2025-09-24 17:12:05.352] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:12:05.352] Read Success [2025-09-24 17:12:05.352] Verifying certificate... [2025-09-24 17:12:05.624] Verified OK [2025-09-24 17:12:05.640] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:12:07.296] Verified OK [2025-09-24 17:12:07.296] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:12:07.855] Verified OK [2025-09-24 17:12:07.855] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:12:10.333] fs.protected_hardlinks = 1 [2025-09-24 17:12:10.333] fs.protected_symlinks = 1 [2025-09-24 17:12:10.348] kernel.modules_disabled = 1 [2025-09-24 17:12:10.540] [2025-09-24 17:12:10.540] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:12:11.995] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:12:19.681] SBL1:1210.0.1.0 [2025-09-24 17:12:19.713] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:12:21.297] SBL2:1210.0.1.0 [2025-09-24 17:12:21.329] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:12:21.441] j-A [2025-09-24 17:12:28.816] The R5 Autosar Classic is running [2025-09-24 17:12:28.816] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:12:28.816] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:12:29.423] INIT: version 2.96 booting [2025-09-24 17:12:29.535] INIT: Entering runlevel: 5 [2025-09-24 17:12:29.679] mtd24 attached [2025-09-24 17:12:29.696] mtd32 attached [2025-09-24 17:12:29.712] mtd28 attached [2025-09-24 17:12:29.790] RTNETLINK answers: File exists [2025-09-24 17:12:29.790] ubi0:textures is mounted. [2025-09-24 17:12:29.790] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:12:29.790] ubi2:animations is mounted. [2025-09-24 17:12:29.790] ubi1:dml_code is mounted. [2025-09-24 17:12:29.790] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:12:29.790] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:12:29.790] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:12:29.790] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:12:29.812] data.LB_FadeInType0=100 [2025-09-24 17:12:29.812] data.CHLH_FadeInType0=0 [2025-09-24 17:12:29.812] data.WU_FadeInDelay=0 [2025-09-24 17:12:29.812] max_time_out=0 [2025-09-24 17:12:29.812] No splash screen [2025-09-24 17:12:29.812] stop dss Done [2025-09-24 17:12:29.842] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:12:29.842] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:12:29.890] /dev/mem opened. [2025-09-24 17:12:29.890] Memory mapped at address 0xffff9d359000. [2025-09-24 17:12:29.890] Read at address 0x00600018 (0xffff9d359018): 0x00000000 [2025-09-24 17:12:29.890] Write at address 0x00600018 (0xffff9d359018): 0x00400040, readback 0x00400040 [2025-09-24 17:12:30.066] Loaded PowerVR consumer services. [2025-09-24 17:12:30.162] Waiting data available... [2025-09-24 17:12:30.194] 512+0 records in [2025-09-24 17:12:30.194] 512+0 records out [2025-09-24 17:12:30.226] Starting syslogd/klogd: done [2025-09-24 17:12:30.242] DML Start [2025-09-24 17:12:30.434] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:12:30.626] DML res1: 0 [2025-09-24 17:12:31.073] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:12:31.089] Read Success [2025-09-24 17:12:31.089] Verifying certificate... [2025-09-24 17:12:31.313] Verified OK [2025-09-24 17:12:31.329] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:12:32.941] Verified OK [2025-09-24 17:12:32.941] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:12:33.623] Verified OK [2025-09-24 17:12:33.623] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:12:36.198] fs.protected_hardlinks = 1 [2025-09-24 17:12:36.198] fs.protected_symlinks = 1 [2025-09-24 17:12:36.213] kernel.modules_disabled = 1 [2025-09-24 17:12:36.389] [2025-09-24 17:12:36.389] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:12:37.684] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:12:45.397] SBL1:1210.0.1.0 [2025-09-24 17:12:45.429] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:12:47.012] SBL2:1210.0.1.0 [2025-09-24 17:12:47.060] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:12:47.156] j-A [2025-09-24 17:12:54.510] The R5 Autosar Classic is running [2025-09-24 17:12:54.532] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:12:54.532] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:12:55.140] INIT: version 2.96 booting [2025-09-24 17:12:55.252] INIT: Entering runlevel: 5 [2025-09-24 17:12:55.396] mtd24 attached [2025-09-24 17:12:55.412] mtd28 attached [2025-09-24 17:12:55.427] mtd32 attached [2025-09-24 17:12:55.460] ubi0:textures is mounted. [2025-09-24 17:12:55.535] ubi1:animations is mounted. [2025-09-24 17:12:55.535] RTNETLINK answers: File exists [2025-09-24 17:12:55.535] ubi2:dml_code is mounted. [2025-09-24 17:12:55.535] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:12:55.535] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:12:55.535] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:12:55.535] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:12:55.535] data.LB_FadeInType0=100 [2025-09-24 17:12:55.535] data.CHLH_FadeInType0=0 [2025-09-24 17:12:55.535] data.WU_FadeInDelay=0 [2025-09-24 17:12:55.535] max_time_out=0 [2025-09-24 17:12:55.535] No splash screen [2025-09-24 17:12:55.535] stop dss Done [2025-09-24 17:12:55.535] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:12:55.567] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:12:55.608] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:12:55.608] /dev/mem opened. [2025-09-24 17:12:55.608] Memory mapped at address 0xffffb9d6f000. [2025-09-24 17:12:55.608] Read at address 0x00600018 (0xffffb9d6f018): 0x00000000 [2025-09-24 17:12:55.608] Write at address 0x00600018 (0xffffb9d6f018): 0x00400040, readback 0x00400040 [2025-09-24 17:12:55.799] Loaded PowerVR consumer services. [2025-09-24 17:12:55.879] Waiting data available... [2025-09-24 17:12:55.911] 512+0 records in [2025-09-24 17:12:55.911] 512+0 records out [2025-09-24 17:12:55.943] Starting syslogd/klogd: done [2025-09-24 17:12:55.959] DML Start [2025-09-24 17:12:56.103] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:12:56.327] DML res1: 0 [2025-09-24 17:12:56.839] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:12:56.860] Read Success [2025-09-24 17:12:56.860] Verifying certificate... [2025-09-24 17:12:57.132] Verified OK [2025-09-24 17:12:57.148] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:12:58.747] Verified OK [2025-09-24 17:12:58.747] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:12:59.298] Verified OK [2025-09-24 17:12:59.298] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:13:01.953] fs.protected_hardlinks = 1 [2025-09-24 17:13:01.969] fs.protected_symlinks = 1 [2025-09-24 17:13:01.969] kernel.modules_disabled = 1 [2025-09-24 17:13:02.177] [2025-09-24 17:13:02.177] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:13:03.389] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:13:11.097] SBL1:1210.0.1.0 [2025-09-24 17:13:11.145] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:13:12.712] SBL2:1210.0.1.0 [2025-09-24 17:13:12.760] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:13:12.872] j-A [2025-09-24 17:13:20.242] The R5 Autosar Classic is running [2025-09-24 17:13:20.242] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:13:20.242] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:13:20.850] INIT: version 2.96 booting [2025-09-24 17:13:20.962] INIT: Entering runlevel: 5 [2025-09-24 17:13:21.122] mtd28 attached [2025-09-24 17:13:21.138] mtd32 attached [2025-09-24 17:13:21.138] mtd24 attached [2025-09-24 17:13:21.186] RTNETLINK answers: File exists [2025-09-24 17:13:21.251] ubi0:animations is mounted. [2025-09-24 17:13:21.251] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:13:21.251] ubi2:textures is mounted. [2025-09-24 17:13:21.251] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:13:21.251] ubi1:dml_code is mounted. [2025-09-24 17:13:21.251] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:13:21.251] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:13:21.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:13:21.251] data.LB_FadeInType0=100 [2025-09-24 17:13:21.251] data.CHLH_FadeInType0=0 [2025-09-24 17:13:21.251] data.WU_FadeInDelay=0 [2025-09-24 17:13:21.251] max_time_out=0 [2025-09-24 17:13:21.251] No splash screen [2025-09-24 17:13:21.251] stop dss Done [2025-09-24 17:13:21.282] /dev/mem opened. [2025-09-24 17:13:21.282] Memory mapped at address 0xffffa4652000. [2025-09-24 17:13:21.308] Read at address 0x00600018 (0xffffa4652018): 0x00000000 [2025-09-24 17:13:21.308] Write at address 0x00600018 (0xffffa4652018): 0x00400040, readback 0x00400040 [2025-09-24 17:13:21.324] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:13:21.324] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:13:21.564] Loaded PowerVR consumer services. [2025-09-24 17:13:21.580] Waiting data available... [2025-09-24 17:13:21.628] 512+0 records in [2025-09-24 17:13:21.628] 512+0 records out [2025-09-24 17:13:21.644] Starting syslogd/klogd: done [2025-09-24 17:13:21.660] DML Start [2025-09-24 17:13:21.820] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:13:22.012] DML res1: 0 [2025-09-24 17:13:22.583] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:13:22.583] Read Success [2025-09-24 17:13:22.583] Verifying certificate... [2025-09-24 17:13:22.871] Verified OK [2025-09-24 17:13:22.887] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:13:24.609] Verified OK [2025-09-24 17:13:24.609] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:13:25.129] Verified OK [2025-09-24 17:13:25.129] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:13:27.559] fs.protected_hardlinks = 1 [2025-09-24 17:13:27.575] fs.protected_symlinks = 1 [2025-09-24 17:13:27.575] kernel.modules_disabled = 1 [2025-09-24 17:13:27.783] [2025-09-24 17:13:27.783] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:13:29.088] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:13:36.827] SBL1:1210.0.1.0 [2025-09-24 17:13:36.875] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:13:38.441] SBL2:1210.0.1.0 [2025-09-24 17:13:38.489] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:13:38.585] j-A [2025-09-24 17:13:45.940] The R5 Autosar Classic is running [2025-09-24 17:13:45.964] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:13:45.964] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:13:46.571] INIT: version 2.96 booting [2025-09-24 17:13:46.683] INIT: Entering runlevel: 5 [2025-09-24 17:13:46.842] mtd28 attached [2025-09-24 17:13:46.842] mtd24 attached [2025-09-24 17:13:46.858] mtd32 attached [2025-09-24 17:13:46.907] ubi0:animations is mounted. [2025-09-24 17:13:46.976] RTNETLINK answers: File exists [2025-09-24 17:13:46.976] ubi1:textures is mounted. [2025-09-24 17:13:46.976] ubi2:dml_code is mounted. [2025-09-24 17:13:46.976] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:13:46.976] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:13:46.976] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:13:46.976] data.LB_FadeInType0=100 [2025-09-24 17:13:46.976] data.CHLH_FadeInType0=0 [2025-09-24 17:13:46.976] data.WU_FadeInDelay=0 [2025-09-24 17:13:46.976] max_time_out=0 [2025-09-24 17:13:46.976] No splash screen [2025-09-24 17:13:46.976] stop dss Done [2025-09-24 17:13:46.976] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:13:46.976] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:13:47.046] /dev/mem opened. [2025-09-24 17:13:47.046] Memory mapped at address 0xffff88561000. [2025-09-24 17:13:47.046] Read at address 0x00600018 (0xffff88561018): 0x00000000 [2025-09-24 17:13:47.046] Write at address 0x00600018 (0xffff88561018): 0x00400040, readback 0x00400040 [2025-09-24 17:13:47.046] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:13:47.046] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:13:47.222] Loaded PowerVR consumer services. [2025-09-24 17:13:47.319] Waiting data available... [2025-09-24 17:13:47.335] 512+0 records in [2025-09-24 17:13:47.335] 512+0 records out [2025-09-24 17:13:47.366] Starting syslogd/klogd: done [2025-09-24 17:13:47.382] DML Start [2025-09-24 17:13:47.574] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:13:47.814] DML res1: 0 [2025-09-24 17:13:48.171] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:13:48.171] Read Success [2025-09-24 17:13:48.171] Verifying certificate... [2025-09-24 17:13:48.428] Verified OK [2025-09-24 17:13:48.443] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:13:50.162] Verified OK [2025-09-24 17:13:50.162] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:13:50.721] Verified OK [2025-09-24 17:13:50.737] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:13:53.280] fs.protected_hardlinks = 1 [2025-09-24 17:13:53.296] fs.protected_symlinks = 1 [2025-09-24 17:13:53.296] kernel.modules_disabled = 1 [2025-09-24 17:13:53.487] [2025-09-24 17:13:53.487] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:13:54.796] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:14:02.530] SBL1:1210.0.1.0 [2025-09-24 17:14:02.578] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:14:04.145] SBL2:1210.0.1.0 [2025-09-24 17:14:04.193] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:14:04.304] j-A [2025-09-24 17:14:11.674] The R5 Autosar Classic is running [2025-09-24 17:14:11.674] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:14:11.674] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:14:12.281] INIT: version 2.96 booting [2025-09-24 17:14:12.393] INIT: Entering runlevel: 5 [2025-09-24 17:14:12.553] mtd32 attached [2025-09-24 17:14:12.553] mtd24 attached [2025-09-24 17:14:12.568] mtd28 attached [2025-09-24 17:14:12.617] RTNETLINK answers: File exists [2025-09-24 17:14:12.617] ubi0:dml_code is mounted. [2025-09-24 17:14:12.661] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:14:12.661] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:14:12.661] ubi1:textures is mounted. [2025-09-24 17:14:12.661] ubi2:animations is mounted. [2025-09-24 17:14:12.661] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:14:12.661] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:14:12.661] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:14:12.661] data.LB_FadeInType0=100 [2025-09-24 17:14:12.661] data.CHLH_FadeInType0=0 [2025-09-24 17:14:12.682] data.WU_FadeInDelay=0 [2025-09-24 17:14:12.682] max_time_out=0 [2025-09-24 17:14:12.682] No splash screen [2025-09-24 17:14:12.682] stop dss Done [2025-09-24 17:14:12.771] /dev/mem opened. [2025-09-24 17:14:12.771] Memory mapped at address 0xffff830fa000. [2025-09-24 17:14:12.771] Read at address 0x00600018 (0xffff830fa018): 0x00000000 [2025-09-24 17:14:12.771] Write at address 0x00600018 (0xffff830fa018): 0x00400040, readback 0x00400040 [2025-09-24 17:14:12.771] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:14:12.771] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:14:12.835] Loaded PowerVR consumer services. [2025-09-24 17:14:13.026] Waiting data available... [2025-09-24 17:14:13.042] 512+0 records in [2025-09-24 17:14:13.042] 512+0 records out [2025-09-24 17:14:13.091] Starting syslogd/klogd: done [2025-09-24 17:14:13.107] DML Start [2025-09-24 17:14:13.314] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:14:13.554] DML res1: 0 [2025-09-24 17:14:13.906] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:14:13.906] Read Success [2025-09-24 17:14:13.922] Verifying certificate... [2025-09-24 17:14:14.161] Verified OK [2025-09-24 17:14:14.177] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:14:15.905] Verified OK [2025-09-24 17:14:15.905] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:14:16.508] Verified OK [2025-09-24 17:14:16.508] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:14:19.066] fs.protected_hardlinks = 1 [2025-09-24 17:14:19.066] fs.protected_symlinks = 1 [2025-09-24 17:14:19.082] kernel.modules_disabled = 1 [2025-09-24 17:14:19.274] [2025-09-24 17:14:19.274] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:14:20.610] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:14:28.262] SBL1:1210.0.1.0 [2025-09-24 17:14:28.310] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:14:29.876] SBL2:1210.0.1.0 [2025-09-24 17:14:29.924] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:14:30.021] j-A [2025-09-24 17:14:37.374] The R5 Autosar Classic is running [2025-09-24 17:14:37.398] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:14:37.398] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:14:38.005] INIT: version 2.96 booting [2025-09-24 17:14:38.118] INIT: Entering runlevel: 5 [2025-09-24 17:14:38.277] mtd32 attached [2025-09-24 17:14:38.293] mtd24 attached [2025-09-24 17:14:38.293] mtd28 attached [2025-09-24 17:14:38.341] RTNETLINK answers: File exists [2025-09-24 17:14:38.411] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:14:38.411] ubi0:dml_code is mounted. [2025-09-24 17:14:38.411] ubi1:textures is mounted. [2025-09-24 17:14:38.411] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:14:38.411] ubi2:animations is mounted. [2025-09-24 17:14:38.411] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:14:38.411] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:14:38.411] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:14:38.411] data.LB_FadeInType0=100 [2025-09-24 17:14:38.411] data.CHLH_FadeInType0=0 [2025-09-24 17:14:38.411] data.WU_FadeInDelay=0 [2025-09-24 17:14:38.411] max_time_out=0 [2025-09-24 17:14:38.411] No splash screen [2025-09-24 17:14:38.411] stop dss Done [2025-09-24 17:14:38.481] /dev/mem opened. [2025-09-24 17:14:38.481] Memory mapped at address 0xffffab8d1000. [2025-09-24 17:14:38.481] Read at address 0x00600018 (0xffffab8d1018): 0x00000000 [2025-09-24 17:14:38.481] Write at address 0x00600018 (0xffffab8d1018): 0x00400040, readback 0x00400040 [2025-09-24 17:14:38.481] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:14:38.481] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:14:38.752] Waiting data available... [2025-09-24 17:14:38.752] Loaded PowerVR consumer services. [2025-09-24 17:14:38.800] 512+0 records in [2025-09-24 17:14:38.800] 512+0 records out [2025-09-24 17:14:38.833] Starting syslogd/klogd: done [2025-09-24 17:14:38.833] DML Start [2025-09-24 17:14:39.024] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:14:39.265] DML res1: 0 [2025-09-24 17:14:39.648] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:14:39.669] Read Success [2025-09-24 17:14:39.669] Verifying certificate... [2025-09-24 17:14:39.925] Verified OK [2025-09-24 17:14:39.940] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:14:41.553] Verified OK [2025-09-24 17:14:41.554] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:14:42.081] Verified OK [2025-09-24 17:14:42.081] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:14:44.623] fs.protected_hardlinks = 1 [2025-09-24 17:14:44.639] fs.protected_symlinks = 1 [2025-09-24 17:14:44.655] kernel.modules_disabled = 1 [2025-09-24 17:14:44.847] [2025-09-24 17:14:44.847] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:14:46.277] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:14:53.959] SBL1:1210.0.1.0 [2025-09-24 17:14:54.007] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:14:55.574] SBL2:1210.0.1.0 [2025-09-24 17:14:55.622] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:14:55.734] j-A [2025-09-24 17:15:03.103] The R5 Autosar Classic is running [2025-09-24 17:15:03.103] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:15:03.103] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:15:03.710] INIT: version 2.96 booting [2025-09-24 17:15:03.823] INIT: Entering runlevel: 5 [2025-09-24 17:15:03.982] mtd24 attached [2025-09-24 17:15:03.998] mtd32 attached [2025-09-24 17:15:03.998] mtd28 attached [2025-09-24 17:15:04.030] ubi0:textures is mounted. [2025-09-24 17:15:04.046] RTNETLINK answers: File exists [2025-09-24 17:15:04.088] ubi1:dml_code is mounted. [2025-09-24 17:15:04.088] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:15:04.088] ubi2:animations is mounted. [2025-09-24 17:15:04.088] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:15:04.088] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:15:04.088] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:15:04.088] data.LB_FadeInType0=100 [2025-09-24 17:15:04.114] data.CHLH_FadeInType0=0 [2025-09-24 17:15:04.114] data.WU_FadeInDelay=0 [2025-09-24 17:15:04.114] max_time_out=0 [2025-09-24 17:15:04.114] No splash screen [2025-09-24 17:15:04.114] stop dss Done [2025-09-24 17:15:04.114] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:15:04.188] /dev/mem opened. [2025-09-24 17:15:04.188] Memory mapped at address 0xffffbee02000. [2025-09-24 17:15:04.188] Read at address 0x00600018 (0xffffbee02018): 0x00000000 [2025-09-24 17:15:04.188] Write at address 0x00600018 (0xffffbee02018): 0x00400040, readback 0x00400040 [2025-09-24 17:15:04.235] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:15:04.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:15:04.395] Loaded PowerVR consumer services. [2025-09-24 17:15:04.475] Waiting data available... [2025-09-24 17:15:04.507] 512+0 records in [2025-09-24 17:15:04.507] 512+0 records out [2025-09-24 17:15:04.522] Starting syslogd/klogd: done [2025-09-24 17:15:04.538] DML Start [2025-09-24 17:15:04.715] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:15:04.922] DML res1: 0 [2025-09-24 17:15:05.381] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:15:05.381] Read Success [2025-09-24 17:15:05.381] Verifying certificate... [2025-09-24 17:15:05.637] Verified OK [2025-09-24 17:15:05.653] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:15:07.181] Verified OK [2025-09-24 17:15:07.181] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:15:07.709] Verified OK [2025-09-24 17:15:07.724] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:15:10.459] fs.protected_hardlinks = 1 [2025-09-24 17:15:10.475] fs.protected_symlinks = 1 [2025-09-24 17:15:10.490] kernel.modules_disabled = 1 [2025-09-24 17:15:10.682] [2025-09-24 17:15:10.682] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:15:11.989] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:15:19.660] SBL1:1210.0.1.0 [2025-09-24 17:15:19.708] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:15:21.275] SBL2:1210.0.1.0 [2025-09-24 17:15:21.323] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:15:21.434] j-A [2025-09-24 17:15:28.771] The R5 Autosar Classic is running [2025-09-24 17:15:28.802] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:15:28.802] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:15:29.410] INIT: version 2.96 booting [2025-09-24 17:15:29.522] INIT: Entering runlevel: 5 [2025-09-24 17:15:29.681] mtd32 attached [2025-09-24 17:15:29.681] mtd28 attached [2025-09-24 17:15:29.697] mtd24 attached [2025-09-24 17:15:29.713] ubi0:dml_code is mounted. [2025-09-24 17:15:29.746] RTNETLINK answers: File exists [2025-09-24 17:15:29.746] ubi2:textures is mounted. [2025-09-24 17:15:29.806] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:15:29.806] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:15:29.806] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:15:29.806] ubi1:animations is mounted. [2025-09-24 17:15:29.806] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:15:29.806] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:15:29.806] data.LB_FadeInType0=100 [2025-09-24 17:15:29.806] data.CHLH_FadeInType0=0 [2025-09-24 17:15:29.806] data.WU_FadeInDelay=0 [2025-09-24 17:15:29.806] max_time_out=0 [2025-09-24 17:15:29.806] No splash screen [2025-09-24 17:15:29.806] stop dss Done [2025-09-24 17:15:29.837] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:15:29.873] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:15:29.873] /dev/mem opened. [2025-09-24 17:15:29.873] Memory mapped at address 0xffff839cb000. [2025-09-24 17:15:29.873] Read at address 0x00600018 (0xffff839cb018): 0x00000000 [2025-09-24 17:15:29.873] Write at address 0x00600018 (0xffff839cb018): 0x00400040, readback 0x00400040 [2025-09-24 17:15:29.969] Loaded PowerVR consumer services. [2025-09-24 17:15:30.145] Waiting data available... [2025-09-24 17:15:30.161] 512+0 records in [2025-09-24 17:15:30.177] 512+0 records out [2025-09-24 17:15:30.209] Starting syslogd/klogd: done [2025-09-24 17:15:30.225] DML Start [2025-09-24 17:15:30.417] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:15:30.640] DML res1: 0 [2025-09-24 17:15:31.065] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:15:31.065] Read Success [2025-09-24 17:15:31.065] Verifying certificate... [2025-09-24 17:15:31.289] Verified OK [2025-09-24 17:15:31.305] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:15:33.014] Verified OK [2025-09-24 17:15:33.014] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:15:33.595] Verified OK [2025-09-24 17:15:33.595] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:15:36.153] fs.protected_hardlinks = 1 [2025-09-24 17:15:36.153] fs.protected_symlinks = 1 [2025-09-24 17:15:36.169] kernel.modules_disabled = 1 [2025-09-24 17:15:36.345] [2025-09-24 17:15:36.345] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:15:37.672] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:15:45.385] SBL1:1210.0.1.0 [2025-09-24 17:15:45.417] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:15:47.000] SBL2:1210.0.1.0 [2025-09-24 17:15:47.032] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:15:47.145] j-A [2025-09-24 17:15:54.498] The R5 Autosar Classic is running [2025-09-24 17:15:54.519] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:15:54.519] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:15:55.127] INIT: version 2.96 booting [2025-09-24 17:15:55.239] INIT: Entering runlevel: 5 [2025-09-24 17:15:55.383] mtd24 attached [2025-09-24 17:15:55.399] mtd28 attached [2025-09-24 17:15:55.415] mtd32 attached [2025-09-24 17:15:55.431] ubi0:textures is mounted. [2025-09-24 17:15:55.463] RTNETLINK answers: File exists [2025-09-24 17:15:55.519] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:15:55.519] ubi1:animations is mounted. [2025-09-24 17:15:55.519] ubi2:dml_code is mounted. [2025-09-24 17:15:55.519] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:15:55.519] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:15:55.519] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:15:55.519] data.LB_FadeInType0=100 [2025-09-24 17:15:55.519] data.CHLH_FadeInType0=0 [2025-09-24 17:15:55.519] data.WU_FadeInDelay=0 [2025-09-24 17:15:55.519] max_time_out=0 [2025-09-24 17:15:55.519] No splash screen [2025-09-24 17:15:55.519] stop dss Done [2025-09-24 17:15:55.519] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:15:55.566] /dev/mem opened. [2025-09-24 17:15:55.566] Memory mapped at address 0xffffbb584000. [2025-09-24 17:15:55.592] Read at address 0x00600018 (0xffffbb584018): 0x00000000 [2025-09-24 17:15:55.592] Write at address 0x00600018 (0xffffbb584018): 0x00400040, readback 0x00400040 [2025-09-24 17:15:55.624] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:15:55.640] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:15:55.864] Waiting data available... [2025-09-24 17:15:55.880] Loaded PowerVR consumer services. [2025-09-24 17:15:55.912] 512+0 records in [2025-09-24 17:15:55.912] 512+0 records out [2025-09-24 17:15:55.944] Starting syslogd/klogd: done [2025-09-24 17:15:55.960] DML Start [2025-09-24 17:15:56.135] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:15:56.360] DML res1: 0 [2025-09-24 17:15:56.792] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:15:56.808] Read Success [2025-09-24 17:15:56.808] Verifying certificate... [2025-09-24 17:15:57.095] Verified OK [2025-09-24 17:15:57.110] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:15:58.646] Verified OK [2025-09-24 17:15:58.646] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:15:59.249] Verified OK [2025-09-24 17:15:59.249] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:16:01.916] fs.protected_hardlinks = 1 [2025-09-24 17:16:01.916] fs.protected_symlinks = 1 [2025-09-24 17:16:01.916] kernel.modules_disabled = 1 [2025-09-24 17:16:02.092] [2025-09-24 17:16:02.092] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:16:03.381] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:16:11.077] SBL1:1210.0.1.0 [2025-09-24 17:16:11.125] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:16:12.692] SBL2:1210.0.1.0 [2025-09-24 17:16:12.739] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:16:12.851] j-A [2025-09-24 17:16:20.220] The R5 Autosar Classic is running [2025-09-24 17:16:20.220] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:16:20.220] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:16:20.828] INIT: version 2.96 booting [2025-09-24 17:16:20.939] INIT: Entering runlevel: 5 [2025-09-24 17:16:21.100] mtd32 attached [2025-09-24 17:16:21.100] mtd24 attached [2025-09-24 17:16:21.116] mtd28 attached [2025-09-24 17:16:21.164] ubi0:dml_code is mounted. [2025-09-24 17:16:21.164] RTNETLINK answers: File exists [2025-09-24 17:16:21.204] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:16:21.204] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:16:21.204] ubi1:textures is mounted. [2025-09-24 17:16:21.204] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:16:21.204] ubi2:animations is mounted. [2025-09-24 17:16:21.204] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:16:21.204] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:16:21.220] data.LB_FadeInType0=100 [2025-09-24 17:16:21.220] data.CHLH_FadeInType0=0 [2025-09-24 17:16:21.251] data.WU_FadeInDelay=0 [2025-09-24 17:16:21.251] max_time_out=0 [2025-09-24 17:16:21.251] No splash screen [2025-09-24 17:16:21.251] stop dss Done [2025-09-24 17:16:21.251] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:16:21.251] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:16:21.316] /dev/mem opened. [2025-09-24 17:16:21.316] Memory mapped at address 0xffffbf39e000. [2025-09-24 17:16:21.316] Read at address 0x00600018 (0xffffbf39e018): 0x00000000 [2025-09-24 17:16:21.316] Write at address 0x00600018 (0xffffbf39e018): 0x00400040, readback 0x00400040 [2025-09-24 17:16:21.572] Loaded PowerVR consumer services. [2025-09-24 17:16:21.620] Waiting data available... [2025-09-24 17:16:21.635] 512+0 records in [2025-09-24 17:16:21.651] 512+0 records out [2025-09-24 17:16:21.683] Starting syslogd/klogd: done [2025-09-24 17:16:21.683] DML Start [2025-09-24 17:16:21.875] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:16:22.099] DML res1: 0 [2025-09-24 17:16:22.523] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:16:22.523] Read Success [2025-09-24 17:16:22.523] Verifying certificate... [2025-09-24 17:16:22.746] Verified OK [2025-09-24 17:16:22.779] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:16:24.456] Verified OK [2025-09-24 17:16:24.456] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:16:25.070] Verified OK [2025-09-24 17:16:25.070] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:16:27.644] fs.protected_hardlinks = 1 [2025-09-24 17:16:27.644] fs.protected_symlinks = 1 [2025-09-24 17:16:27.660] kernel.modules_disabled = 1 [2025-09-24 17:16:27.835] [2025-09-24 17:16:27.835] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:16:29.118] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:16:36.791] SBL1:1210.0.1.0 [2025-09-24 17:16:36.839] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:16:38.405] SBL2:1210.0.1.0 [2025-09-24 17:16:38.453] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:16:38.549] j-A [2025-09-24 17:16:45.902] The R5 Autosar Classic is running [2025-09-24 17:16:45.925] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:16:45.925] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:16:46.533] INIT: version 2.96 booting [2025-09-24 17:16:46.645] INIT: Entering runlevel: 5 [2025-09-24 17:16:46.789] mtd24 attached [2025-09-24 17:16:46.805] mtd28 attached [2025-09-24 17:16:46.821] mtd32 attached [2025-09-24 17:16:46.922] RTNETLINK answers: File exists [2025-09-24 17:16:46.922] ubi0:textures is mounted. [2025-09-24 17:16:46.922] ubi1:animations is mounted. [2025-09-24 17:16:46.922] ubi2:dml_code is mounted. [2025-09-24 17:16:46.922] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:16:46.922] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:16:46.922] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:16:46.922] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:16:46.922] data.LB_FadeInType0=100 [2025-09-24 17:16:46.922] data.CHLH_FadeInType0=0 [2025-09-24 17:16:46.922] data.WU_FadeInDelay=0 [2025-09-24 17:16:46.922] max_time_out=0 [2025-09-24 17:16:46.922] No splash screen [2025-09-24 17:16:46.922] stop dss Done [2025-09-24 17:16:46.922] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:16:46.953] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:16:46.994] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:16:46.994] /dev/mem opened. [2025-09-24 17:16:46.994] Memory mapped at address 0xffff916b2000. [2025-09-24 17:16:46.994] Read at address 0x00600018 (0xffff916b2018): 0x00000000 [2025-09-24 17:16:46.994] Write at address 0x00600018 (0xffff916b2018): 0x00400040, readback 0x00400040 [2025-09-24 17:16:47.123] Loaded PowerVR consumer services. [2025-09-24 17:16:47.282] Waiting data available... [2025-09-24 17:16:47.298] 512+0 records in [2025-09-24 17:16:47.298] 512+0 records out [2025-09-24 17:16:47.330] Starting syslogd/klogd: done [2025-09-24 17:16:47.346] DML Start [2025-09-24 17:16:47.554] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:16:47.794] DML res1: 0 [2025-09-24 17:16:48.106] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:16:48.106] Read Success [2025-09-24 17:16:48.106] Verifying certificate... [2025-09-24 17:16:48.394] Verified OK [2025-09-24 17:16:48.426] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:16:50.112] Verified OK [2025-09-24 17:16:50.112] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:16:50.714] Verified OK [2025-09-24 17:16:50.714] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:16:53.240] fs.protected_hardlinks = 1 [2025-09-24 17:16:53.240] fs.protected_symlinks = 1 [2025-09-24 17:16:53.256] kernel.modules_disabled = 1 [2025-09-24 17:16:53.447] [2025-09-24 17:16:53.447] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:16:54.829] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:17:02.515] SBL1:1210.0.1.0 [2025-09-24 17:17:02.547] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:17:04.130] SBL2:1210.0.1.0 [2025-09-24 17:17:04.178] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:17:04.274] j-A [2025-09-24 17:17:11.628] The R5 Autosar Classic is running [2025-09-24 17:17:11.649] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:17:11.649] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:17:12.257] INIT: version 2.96 booting [2025-09-24 17:17:12.369] INIT: Entering runlevel: 5 [2025-09-24 17:17:12.513] mtd28 attached [2025-09-24 17:17:12.529] mtd24 attached [2025-09-24 17:17:12.545] mtd32 attached [2025-09-24 17:17:12.603] ubi0:animations is mounted. [2025-09-24 17:17:12.603] ubi1:textures is mounted. [2025-09-24 17:17:12.603] RTNETLINK answers: File exists [2025-09-24 17:17:12.603] ubi2:dml_code is mounted. [2025-09-24 17:17:12.603] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:17:12.653] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:17:12.653] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:17:12.653] data.LB_FadeInType0=100 [2025-09-24 17:17:12.653] data.CHLH_FadeInType0=0 [2025-09-24 17:17:12.653] data.WU_FadeInDelay=0 [2025-09-24 17:17:12.653] max_time_out=0 [2025-09-24 17:17:12.653] No splash screen [2025-09-24 17:17:12.653] stop dss Done [2025-09-24 17:17:12.653] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:17:12.653] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:17:12.685] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:17:12.721] /dev/mem opened. [2025-09-24 17:17:12.721] Memory mapped at address 0xffffa5d70000. [2025-09-24 17:17:12.721] Read at address 0x00600018 (0xffffa5d70018): 0x00000000 [2025-09-24 17:17:12.721] Write at address 0x00600018 (0xffffa5d70018): 0x00400040, readback 0x00400040 [2025-09-24 17:17:12.721] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:17:12.946] Loaded PowerVR consumer services. [2025-09-24 17:17:13.010] Waiting data available... [2025-09-24 17:17:13.042] 512+0 records in [2025-09-24 17:17:13.042] 512+0 records out [2025-09-24 17:17:13.074] Starting syslogd/klogd: done [2025-09-24 17:17:13.074] DML Start [2025-09-24 17:17:13.217] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:17:13.425] DML res1: 0 [2025-09-24 17:17:13.984] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:17:13.984] Read Success [2025-09-24 17:17:13.984] Verifying certificate... [2025-09-24 17:17:14.223] Verified OK [2025-09-24 17:17:14.239] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:17:15.831] Verified OK [2025-09-24 17:17:15.831] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:17:16.454] Verified OK [2025-09-24 17:17:16.454] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:17:19.043] fs.protected_hardlinks = 1 [2025-09-24 17:17:19.073] fs.protected_symlinks = 1 [2025-09-24 17:17:19.073] kernel.modules_disabled = 1 [2025-09-24 17:17:19.266] [2025-09-24 17:17:19.266] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:17:20.509] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:17:28.236] SBL1:1210.0.1.0 [2025-09-24 17:17:28.268] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:17:29.850] SBL2:1210.0.1.0 [2025-09-24 17:17:29.882] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:17:29.995] j-A [2025-09-24 17:17:37.370] The R5 Autosar Classic is running [2025-09-24 17:17:37.370] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:17:37.370] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:17:37.977] INIT: version 2.96 booting [2025-09-24 17:17:38.089] INIT: Entering runlevel: 5 [2025-09-24 17:17:38.248] mtd28 attached [2025-09-24 17:17:38.264] mtd32 attached [2025-09-24 17:17:38.264] mtd24 attached [2025-09-24 17:17:38.312] RTNETLINK answers: File exists [2025-09-24 17:17:38.359] ubi1:dml_code is mounted. [2025-09-24 17:17:38.359] ubi0:animations is mounted. [2025-09-24 17:17:38.359] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:17:38.359] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:17:38.359] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:17:38.359] ubi2:textures is mounted. [2025-09-24 17:17:38.359] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:17:38.359] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:17:38.381] data.LB_FadeInType0=100 [2025-09-24 17:17:38.381] data.CHLH_FadeInType0=0 [2025-09-24 17:17:38.381] data.WU_FadeInDelay=0 [2025-09-24 17:17:38.381] max_time_out=0 [2025-09-24 17:17:38.381] No splash screen [2025-09-24 17:17:38.381] stop dss Done [2025-09-24 17:17:38.413] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:17:38.448] /dev/mem opened. [2025-09-24 17:17:38.448] Memory mapped at address 0xffffafc62000. [2025-09-24 17:17:38.448] Read at address 0x00600018 (0xffffafc62018): 0x00000000 [2025-09-24 17:17:38.448] Write at address 0x00600018 (0xffffafc62018): 0x00400040, readback 0x00400040 [2025-09-24 17:17:38.448] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:17:38.720] Loaded PowerVR consumer services. [2025-09-24 17:17:38.736] Waiting data available... [2025-09-24 17:17:38.751] 512+0 records in [2025-09-24 17:17:38.751] 512+0 records out [2025-09-24 17:17:38.784] Starting syslogd/klogd: done [2025-09-24 17:17:38.800] DML Start [2025-09-24 17:17:39.007] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:17:39.167] DML res1: 0 [2025-09-24 17:17:39.612] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:17:39.612] Read Success [2025-09-24 17:17:39.612] Verifying certificate... [2025-09-24 17:17:39.836] Verified OK [2025-09-24 17:17:39.852] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:17:41.569] Verified OK [2025-09-24 17:17:41.569] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:17:42.174] Verified OK [2025-09-24 17:17:42.174] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:17:44.763] fs.protected_hardlinks = 1 [2025-09-24 17:17:44.763] fs.protected_symlinks = 1 [2025-09-24 17:17:44.779] kernel.modules_disabled = 1 [2025-09-24 17:17:44.986] [2025-09-24 17:17:44.986] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:17:46.218] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:17:53.937] SBL1:1210.0.1.0 [2025-09-24 17:17:53.969] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:17:55.552] SBL2:1210.0.1.0 [2025-09-24 17:17:55.584] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:17:55.696] j-A [2025-09-24 17:18:03.051] The R5 Autosar Classic is running [2025-09-24 17:18:03.051] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:18:03.072] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:18:03.679] INIT: version 2.96 booting [2025-09-24 17:18:03.791] INIT: Entering runlevel: 5 [2025-09-24 17:18:03.951] mtd28 attached [2025-09-24 17:18:03.951] mtd24 attached [2025-09-24 17:18:03.967] mtd32 attached [2025-09-24 17:18:04.047] RTNETLINK answers: File exists [2025-09-24 17:18:04.047] ubi0:animations is mounted. [2025-09-24 17:18:04.047] ubi1:textures is mounted. [2025-09-24 17:18:04.047] ubi2:dml_code is mounted. [2025-09-24 17:18:04.047] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:18:04.047] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:18:04.047] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:18:04.047] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:18:04.079] data.LB_FadeInType0=100 [2025-09-24 17:18:04.079] data.CHLH_FadeInType0=0 [2025-09-24 17:18:04.079] data.WU_FadeInDelay=0 [2025-09-24 17:18:04.079] max_time_out=0 [2025-09-24 17:18:04.079] No splash screen [2025-09-24 17:18:04.079] stop dss Done [2025-09-24 17:18:04.079] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:18:04.147] /dev/mem opened. [2025-09-24 17:18:04.147] Memory mapped at address 0xffffb9e06000. [2025-09-24 17:18:04.147] Read at address 0x00600018 (0xffffb9e06018): 0x00000000 [2025-09-24 17:18:04.147] Write at address 0x00600018 (0xffffb9e06018): 0x00400040, readback 0x00400040 [2025-09-24 17:18:04.147] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:18:04.163] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:18:04.323] Loaded PowerVR consumer services. [2025-09-24 17:18:04.450] Waiting data available... [2025-09-24 17:18:04.467] 512+0 records in [2025-09-24 17:18:04.467] 512+0 records out [2025-09-24 17:18:04.499] Starting syslogd/klogd: done [2025-09-24 17:18:04.515] DML Start [2025-09-24 17:18:04.674] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:18:04.930] DML res1: 0 [2025-09-24 17:18:05.336] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:18:05.336] Read Success [2025-09-24 17:18:05.336] Verifying certificate... [2025-09-24 17:18:05.576] Verified OK [2025-09-24 17:18:05.592] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:18:07.164] Verified OK [2025-09-24 17:18:07.164] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:18:07.788] Verified OK [2025-09-24 17:18:07.788] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:18:10.564] fs.protected_hardlinks = 1 [2025-09-24 17:18:10.564] fs.protected_symlinks = 1 [2025-09-24 17:18:10.564] kernel.modules_disabled = 1 [2025-09-24 17:18:10.756] [2025-09-24 17:18:10.756] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:18:11.983] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:18:19.629] SBL1:1210.0.1.0 [2025-09-24 17:18:19.677] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:18:21.244] SBL2:1210.0.1.0 [2025-09-24 17:18:21.291] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:18:21.404] j-A [2025-09-24 17:18:28.777] The R5 Autosar Classic is running [2025-09-24 17:18:28.777] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:18:28.777] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:18:29.384] INIT: version 2.96 booting [2025-09-24 17:18:29.495] INIT: Entering runlevel: 5 [2025-09-24 17:18:29.656] mtd32 attached [2025-09-24 17:18:29.656] mtd24 attached [2025-09-24 17:18:29.672] mtd28 attached [2025-09-24 17:18:29.720] RTNETLINK answers: File exists [2025-09-24 17:18:29.770] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:18:29.770] ubi0:dml_code is mounted. [2025-09-24 17:18:29.770] ubi1:textures is mounted. [2025-09-24 17:18:29.770] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:18:29.770] ubi2:animations is mounted. [2025-09-24 17:18:29.770] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:18:29.770] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:18:29.770] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:18:29.770] data.LB_FadeInType0=100 [2025-09-24 17:18:29.770] data.CHLH_FadeInType0=0 [2025-09-24 17:18:29.791] data.WU_FadeInDelay=0 [2025-09-24 17:18:29.791] max_time_out=0 [2025-09-24 17:18:29.791] No splash screen [2025-09-24 17:18:29.791] stop dss Done [2025-09-24 17:18:29.859] /dev/mem opened. [2025-09-24 17:18:29.859] Memory mapped at address 0xffffa8cf7000. [2025-09-24 17:18:29.859] Read at address 0x00600018 (0xffffa8cf7018): 0x00000000 [2025-09-24 17:18:29.859] Write at address 0x00600018 (0xffffa8cf7018): 0x00400040, readback 0x00400040 [2025-09-24 17:18:29.859] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:18:29.874] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:18:29.955] Loaded PowerVR consumer services. [2025-09-24 17:18:30.146] Waiting data available... [2025-09-24 17:18:30.179] 512+0 records in [2025-09-24 17:18:30.179] 512+0 records out [2025-09-24 17:18:30.195] Starting syslogd/klogd: done [2025-09-24 17:18:30.211] DML Start [2025-09-24 17:18:30.354] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:18:30.531] DML res1: 0 [2025-09-24 17:18:31.106] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:18:31.127] Read Success [2025-09-24 17:18:31.127] Verifying certificate... [2025-09-24 17:18:31.351] Verified OK [2025-09-24 17:18:31.366] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:18:33.072] Verified OK [2025-09-24 17:18:33.072] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:18:33.631] Verified OK [2025-09-24 17:18:33.631] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:18:36.254] fs.protected_hardlinks = 1 [2025-09-24 17:18:36.254] fs.protected_symlinks = 1 [2025-09-24 17:18:36.270] kernel.modules_disabled = 1 [2025-09-24 17:18:36.477] [2025-09-24 17:18:36.477] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:18:37.669] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:18:45.341] SBL1:1210.0.1.0 [2025-09-24 17:18:45.389] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:18:46.957] SBL2:1210.0.1.0 [2025-09-24 17:18:47.004] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:18:47.100] j-A [2025-09-24 17:18:54.455] The R5 Autosar Classic is running [2025-09-24 17:18:54.478] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:18:54.478] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:18:55.086] INIT: version 2.96 booting [2025-09-24 17:18:55.197] INIT: Entering runlevel: 5 [2025-09-24 17:18:55.358] mtd24 attached [2025-09-24 17:18:55.358] mtd32 attached [2025-09-24 17:18:55.374] mtd28 attached [2025-09-24 17:18:55.390] ubi0:textures is mounted. [2025-09-24 17:18:55.422] RTNETLINK answers: File exists [2025-09-24 17:18:55.459] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:18:55.459] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:18:55.459] ubi1:dml_code is mounted. [2025-09-24 17:18:55.459] ubi2:animations is mounted. [2025-09-24 17:18:55.459] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:18:55.459] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:18:55.459] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:18:55.486] data.LB_FadeInType0=100 [2025-09-24 17:18:55.486] data.CHLH_FadeInType0=0 [2025-09-24 17:18:55.486] data.WU_FadeInDelay=0 [2025-09-24 17:18:55.486] max_time_out=0 [2025-09-24 17:18:55.486] No splash screen [2025-09-24 17:18:55.486] stop dss Done [2025-09-24 17:18:55.559] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:18:55.559] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:18:55.559] /dev/mem opened. [2025-09-24 17:18:55.559] Memory mapped at address 0xffffaf804000. [2025-09-24 17:18:55.559] Read at address 0x00600018 (0xffffaf804018): 0x00000000 [2025-09-24 17:18:55.559] Write at address 0x00600018 (0xffffaf804018): 0x00400040, readback 0x00400040 [2025-09-24 17:18:55.718] Loaded PowerVR consumer services. [2025-09-24 17:18:55.846] Waiting data available... [2025-09-24 17:18:55.862] 512+0 records in [2025-09-24 17:18:55.862] 512+0 records out [2025-09-24 17:18:55.910] Starting syslogd/klogd: done [2025-09-24 17:18:55.926] DML Start [2025-09-24 17:18:56.085] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:18:56.310] DML res1: 0 [2025-09-24 17:18:56.797] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:18:56.797] Read Success [2025-09-24 17:18:56.797] Verifying certificate... [2025-09-24 17:18:57.036] Verified OK [2025-09-24 17:18:57.036] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:18:58.811] Verified OK [2025-09-24 17:18:58.811] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:18:59.338] Verified OK [2025-09-24 17:18:59.338] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:19:01.817] fs.protected_hardlinks = 1 [2025-09-24 17:19:01.817] fs.protected_symlinks = 1 [2025-09-24 17:19:01.832] kernel.modules_disabled = 1 [2025-09-24 17:19:02.024] [2025-09-24 17:19:02.024] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:19:03.344] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:19:11.039] SBL1:1210.0.1.0 [2025-09-24 17:19:11.087] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:19:12.653] SBL2:1210.0.1.0 [2025-09-24 17:19:12.701] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:19:12.813] j-A [2025-09-24 17:19:20.184] The R5 Autosar Classic is running [2025-09-24 17:19:20.184] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:19:20.184] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:19:20.792] INIT: version 2.96 booting [2025-09-24 17:19:20.904] INIT: Entering runlevel: 5 [2025-09-24 17:19:21.048] mtd24 attached [2025-09-24 17:19:21.064] mtd32 attached [2025-09-24 17:19:21.096] mtd28 attached [2025-09-24 17:19:21.096] ubi0:textures is mounted. [2025-09-24 17:19:21.112] ubi1:dml_code is mounted. [2025-09-24 17:19:21.128] RTNETLINK answers: File exists [2025-09-24 17:19:21.185] ubi2:animations is mounted. [2025-09-24 17:19:21.185] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:19:21.185] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:19:21.185] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:19:21.185] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:19:21.185] data.LB_FadeInType0=100 [2025-09-24 17:19:21.185] data.CHLH_FadeInType0=0 [2025-09-24 17:19:21.185] data.WU_FadeInDelay=0 [2025-09-24 17:19:21.185] max_time_out=0 [2025-09-24 17:19:21.185] No splash screen [2025-09-24 17:19:21.185] stop dss Done [2025-09-24 17:19:21.185] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:19:21.271] /dev/mem opened. [2025-09-24 17:19:21.271] Memory mapped at address 0xffffaf21f000. [2025-09-24 17:19:21.271] Read at address 0x00600018 (0xffffaf21f018): 0x00000000 [2025-09-24 17:19:21.271] Write at address 0x00600018 (0xffffaf21f018): 0x00400040, readback 0x00400040 [2025-09-24 17:19:21.271] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:19:21.271] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:19:21.511] Loaded PowerVR consumer services. [2025-09-24 17:19:21.559] Waiting data available... [2025-09-24 17:19:21.575] 512+0 records in [2025-09-24 17:19:21.575] 512+0 records out [2025-09-24 17:19:21.607] Starting syslogd/klogd: done [2025-09-24 17:19:21.623] DML Start [2025-09-24 17:19:21.831] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:19:22.007] DML res1: 0 [2025-09-24 17:19:22.463] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:19:22.463] Read Success [2025-09-24 17:19:22.463] Verifying certificate... [2025-09-24 17:19:22.702] Verified OK [2025-09-24 17:19:22.718] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:19:24.451] Verified OK [2025-09-24 17:19:24.451] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:19:25.075] Verified OK [2025-09-24 17:19:25.075] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:19:27.680] fs.protected_hardlinks = 1 [2025-09-24 17:19:27.709] fs.protected_symlinks = 1 [2025-09-24 17:19:27.709] kernel.modules_disabled = 1 [2025-09-24 17:19:27.885] [2025-09-24 17:19:27.885] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:19:29.050] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:19:36.756] SBL1:1210.0.1.0 [2025-09-24 17:19:36.788] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:19:38.370] SBL2:1210.0.1.0 [2025-09-24 17:19:38.402] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:19:38.515] j-A [2025-09-24 17:19:45.869] The R5 Autosar Classic is running [2025-09-24 17:19:45.869] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:19:45.890] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:19:46.497] INIT: version 2.96 booting [2025-09-24 17:19:46.609] INIT: Entering runlevel: 5 [2025-09-24 17:19:46.754] mtd24 attached [2025-09-24 17:19:46.770] mtd28 attached [2025-09-24 17:19:46.786] mtd32 attached [2025-09-24 17:19:46.817] ubi0:textures is mounted. [2025-09-24 17:19:46.833] ubi1:animations is mounted. [2025-09-24 17:19:46.833] RTNETLINK answers: File exists [2025-09-24 17:19:46.893] ubi2:dml_code is mounted. [2025-09-24 17:19:46.893] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:19:46.893] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:19:46.893] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:19:46.893] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:19:46.893] data.LB_FadeInType0=100 [2025-09-24 17:19:46.893] data.CHLH_FadeInType0=0 [2025-09-24 17:19:46.893] data.WU_FadeInDelay=0 [2025-09-24 17:19:46.893] max_time_out=0 [2025-09-24 17:19:46.893] No splash screen [2025-09-24 17:19:46.893] stop dss Done [2025-09-24 17:19:46.893] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:19:46.958] /dev/mem opened. [2025-09-24 17:19:46.958] Memory mapped at address 0xffff97232000. [2025-09-24 17:19:46.958] Read at address 0x00600018 (0xffff97232018): 0x00000000 [2025-09-24 17:19:46.958] Write at address 0x00600018 (0xffff97232018): 0x00400040, readback 0x00400040 [2025-09-24 17:19:46.958] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:19:46.974] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:19:47.181] Loaded PowerVR consumer services. [2025-09-24 17:19:47.261] Waiting data available... [2025-09-24 17:19:47.293] 512+0 records in [2025-09-24 17:19:47.293] 512+0 records out [2025-09-24 17:19:47.324] Starting syslogd/klogd: done [2025-09-24 17:19:47.340] DML Start [2025-09-24 17:19:47.485] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:19:47.724] DML res1: 0 [2025-09-24 17:19:48.162] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:19:48.162] Read Success [2025-09-24 17:19:48.162] Verifying certificate... [2025-09-24 17:19:48.434] Verified OK [2025-09-24 17:19:48.450] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:19:50.142] Verified OK [2025-09-24 17:19:50.142] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:19:50.697] Verified OK [2025-09-24 17:19:50.697] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:19:53.095] fs.protected_hardlinks = 1 [2025-09-24 17:19:53.095] fs.protected_symlinks = 1 [2025-09-24 17:19:53.111] kernel.modules_disabled = 1 [2025-09-24 17:19:53.302] [2025-09-24 17:19:53.302] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:19:54.773] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:20:02.452] SBL1:1210.0.1.0 [2025-09-24 17:20:02.499] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:20:04.066] SBL2:1210.0.1.0 [2025-09-24 17:20:04.114] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:20:04.210] j-A [2025-09-24 17:20:11.563] The R5 Autosar Classic is running [2025-09-24 17:20:11.588] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:20:11.588] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:20:12.196] INIT: version 2.96 booting [2025-09-24 17:20:12.309] INIT: Entering runlevel: 5 [2025-09-24 17:20:12.452] mtd24 attached [2025-09-24 17:20:12.468] mtd28 attached [2025-09-24 17:20:12.484] mtd32 attached [2025-09-24 17:20:12.580] ubi0:textures is mounted. [2025-09-24 17:20:12.580] RTNETLINK answers: File exists [2025-09-24 17:20:12.580] ubi1:animations is mounted. [2025-09-24 17:20:12.580] ubi2:dml_code is mounted. [2025-09-24 17:20:12.580] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:20:12.580] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:20:12.580] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:20:12.580] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:20:12.580] data.LB_FadeInType0=100 [2025-09-24 17:20:12.580] data.CHLH_FadeInType0=0 [2025-09-24 17:20:12.580] data.WU_FadeInDelay=0 [2025-09-24 17:20:12.580] max_time_out=0 [2025-09-24 17:20:12.580] No splash screen [2025-09-24 17:20:12.580] stop dss Done [2025-09-24 17:20:12.580] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:20:12.640] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:20:12.640] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:20:12.672] /dev/mem opened. [2025-09-24 17:20:12.672] Memory mapped at address 0xffffb624a000. [2025-09-24 17:20:12.672] Read at address 0x00600018 (0xffffb624a018): 0x00000000 [2025-09-24 17:20:12.672] Write at address 0x00600018 (0xffffb624a018): 0x00400040, readback 0x00400040 [2025-09-24 17:20:12.736] Loaded PowerVR consumer services. [2025-09-24 17:20:12.928] Waiting data available... [2025-09-24 17:20:12.960] 512+0 records in [2025-09-24 17:20:12.960] 512+0 records out [2025-09-24 17:20:13.008] Starting syslogd/klogd: done [2025-09-24 17:20:13.024] DML Start [2025-09-24 17:20:13.215] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:20:13.456] DML res1: 0 [2025-09-24 17:20:13.877] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:20:13.877] Read Success [2025-09-24 17:20:13.877] Verifying certificate... [2025-09-24 17:20:14.101] Verified OK [2025-09-24 17:20:14.117] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:20:15.752] Verified OK [2025-09-24 17:20:15.752] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:20:16.374] Verified OK [2025-09-24 17:20:16.374] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:20:19.012] fs.protected_hardlinks = 1 [2025-09-24 17:20:19.012] fs.protected_symlinks = 1 [2025-09-24 17:20:19.028] kernel.modules_disabled = 1 [2025-09-24 17:20:19.236] [2025-09-24 17:20:19.236] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:20:20.466] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:20:28.166] SBL1:1210.0.1.0 [2025-09-24 17:20:28.214] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:20:29.780] SBL2:1210.0.1.0 [2025-09-24 17:20:29.828] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:20:29.924] j-A [2025-09-24 17:20:37.277] The R5 Autosar Classic is running [2025-09-24 17:20:37.302] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:20:37.302] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:20:37.909] INIT: version 2.96 booting [2025-09-24 17:20:38.022] INIT: Entering runlevel: 5 [2025-09-24 17:20:38.181] mtd32 attached [2025-09-24 17:20:38.181] mtd24 attached [2025-09-24 17:20:38.197] mtd28 attached [2025-09-24 17:20:38.246] RTNETLINK answers: File exists [2025-09-24 17:20:38.309] ubi1:textures is mounted. [2025-09-24 17:20:38.309] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:20:38.309] ubi2:animations is mounted. [2025-09-24 17:20:38.309] ubi0:dml_code is mounted. [2025-09-24 17:20:38.309] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:20:38.309] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:20:38.309] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:20:38.309] data.LB_FadeInType0=100 [2025-09-24 17:20:38.309] data.CHLH_FadeInType0=0 [2025-09-24 17:20:38.309] data.WU_FadeInDelay=0 [2025-09-24 17:20:38.309] max_time_out=0 [2025-09-24 17:20:38.309] No splash screen [2025-09-24 17:20:38.309] stop dss Done [2025-09-24 17:20:38.309] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:20:38.388] /dev/mem opened. [2025-09-24 17:20:38.388] Memory mapped at address 0xffffbb63d000. [2025-09-24 17:20:38.388] Read at address 0x00600018 (0xffffbb63d018): 0x00000000 [2025-09-24 17:20:38.388] Write at address 0x00600018 (0xffffbb63d018): 0x00400040, readback 0x00400040 [2025-09-24 17:20:38.388] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:20:38.388] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:20:38.499] Loaded PowerVR consumer services. [2025-09-24 17:20:38.676] Waiting data available... [2025-09-24 17:20:38.691] 512+0 records in [2025-09-24 17:20:38.691] 512+0 records out [2025-09-24 17:20:38.707] Starting syslogd/klogd: done [2025-09-24 17:20:38.739] DML Start [2025-09-24 17:20:38.899] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:20:39.091] DML res1: 0 [2025-09-24 17:20:39.600] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:20:39.600] Read Success [2025-09-24 17:20:39.600] Verifying certificate... [2025-09-24 17:20:39.840] Verified OK [2025-09-24 17:20:39.855] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:20:41.605] Verified OK [2025-09-24 17:20:41.605] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:20:42.244] Verified OK [2025-09-24 17:20:42.265] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:20:44.855] fs.protected_hardlinks = 1 [2025-09-24 17:20:44.855] fs.protected_symlinks = 1 [2025-09-24 17:20:44.871] kernel.modules_disabled = 1 [2025-09-24 17:20:45.064] [2025-09-24 17:20:45.064] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:20:46.172] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:20:53.866] SBL1:1210.0.1.0 [2025-09-24 17:20:53.914] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:20:55.480] SBL2:1210.0.1.0 [2025-09-24 17:20:55.528] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:20:55.624] j-A [2025-09-24 17:21:02.976] The R5 Autosar Classic is running [2025-09-24 17:21:03.001] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:21:03.001] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:21:03.609] INIT: version 2.96 booting [2025-09-24 17:21:03.737] INIT: Entering runlevel: 5 [2025-09-24 17:21:03.880] mtd24 attached [2025-09-24 17:21:03.896] mtd28 attached [2025-09-24 17:21:03.928] ubi0:textures is mounted. [2025-09-24 17:21:03.945] mtd32 attached [2025-09-24 17:21:03.945] ubi1:animations is mounted. [2025-09-24 17:21:03.998] RTNETLINK answers: File exists [2025-09-24 17:21:03.998] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:21:03.998] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:21:03.998] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:21:03.998] ubi2:dml_code is mounted. [2025-09-24 17:21:03.998] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:21:03.998] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:21:03.998] data.LB_FadeInType0=100 [2025-09-24 17:21:04.019] data.CHLH_FadeInType0=0 [2025-09-24 17:21:04.019] data.WU_FadeInDelay=0 [2025-09-24 17:21:04.019] max_time_out=0 [2025-09-24 17:21:04.019] No splash screen [2025-09-24 17:21:04.019] stop dss Done [2025-09-24 17:21:04.050] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:21:04.050] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:21:04.066] /dev/mem opened. [2025-09-24 17:21:04.066] Memory mapped at address 0xffff8a59b000. [2025-09-24 17:21:04.091] Read at address 0x00600018 (0xffff8a59b018): 0x00000000 [2025-09-24 17:21:04.091] Write at address 0x00600018 (0xffff8a59b018): 0x00400040, readback 0x00400040 [2025-09-24 17:21:04.171] Loaded PowerVR consumer services. [2025-09-24 17:21:04.379] Waiting data available... [2025-09-24 17:21:04.395] 512+0 records in [2025-09-24 17:21:04.395] 512+0 records out [2025-09-24 17:21:04.443] Starting syslogd/klogd: done [2025-09-24 17:21:04.459] DML Start [2025-09-24 17:21:04.651] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:21:04.875] DML res1: 0 [2025-09-24 17:21:05.316] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:21:05.316] Read Success [2025-09-24 17:21:05.316] Verifying certificate... [2025-09-24 17:21:05.540] Verified OK [2025-09-24 17:21:05.555] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:21:07.210] Verified OK [2025-09-24 17:21:07.210] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:21:07.817] Verified OK [2025-09-24 17:21:07.817] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:21:10.550] fs.protected_hardlinks = 1 [2025-09-24 17:21:10.550] fs.protected_symlinks = 1 [2025-09-24 17:21:10.550] kernel.modules_disabled = 1 [2025-09-24 17:21:10.726] [2025-09-24 17:21:10.726] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:21:11.937] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:21:19.563] SBL1:1210.0.1.0 [2025-09-24 17:21:19.611] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:21:21.178] SBL2:1210.0.1.0 [2025-09-24 17:21:21.226] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:21:21.338] j-A [2025-09-24 17:21:28.674] The R5 Autosar Classic is running [2025-09-24 17:21:28.706] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:21:28.706] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:21:29.313] INIT: version 2.96 booting [2025-09-24 17:21:29.425] INIT: Entering runlevel: 5 [2025-09-24 17:21:29.569] mtd32 attached [2025-09-24 17:21:29.585] mtd28 attached [2025-09-24 17:21:29.585] mtd24 attached [2025-09-24 17:21:29.649] ubi0:dml_code is mounted. [2025-09-24 17:21:29.649] RTNETLINK answers: File exists [2025-09-24 17:21:29.706] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:21:29.706] ubi2:textures is mounted. [2025-09-24 17:21:29.706] ubi1:animations is mounted. [2025-09-24 17:21:29.706] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:21:29.706] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:21:29.706] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:21:29.706] data.LB_FadeInType0=100 [2025-09-24 17:21:29.706] data.CHLH_FadeInType0=0 [2025-09-24 17:21:29.706] data.WU_FadeInDelay=0 [2025-09-24 17:21:29.706] max_time_out=0 [2025-09-24 17:21:29.706] No splash screen [2025-09-24 17:21:29.706] stop dss Done [2025-09-24 17:21:29.706] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:21:29.738] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:21:29.784] /dev/mem opened. [2025-09-24 17:21:29.784] Memory mapped at address 0xffffb4332000. [2025-09-24 17:21:29.784] Read at address 0x00600018 (0xffffb4332018): 0x00000000 [2025-09-24 17:21:29.784] Write at address 0x00600018 (0xffffb4332018): 0x00400040, readback 0x00400040 [2025-09-24 17:21:29.784] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:21:29.912] Loaded PowerVR consumer services. [2025-09-24 17:21:30.056] Waiting data available... [2025-09-24 17:21:30.072] 512+0 records in [2025-09-24 17:21:30.088] 512+0 records out [2025-09-24 17:21:30.119] Starting syslogd/klogd: done [2025-09-24 17:21:30.135] DML Start [2025-09-24 17:21:30.360] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:21:30.567] DML res1: 0 [2025-09-24 17:21:30.934] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:21:30.950] Read Success [2025-09-24 17:21:30.950] Verifying certificate... [2025-09-24 17:21:31.190] Verified OK [2025-09-24 17:21:31.206] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:21:32.949] Verified OK [2025-09-24 17:21:32.949] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:21:33.523] Verified OK [2025-09-24 17:21:33.523] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:21:36.097] fs.protected_hardlinks = 1 [2025-09-24 17:21:36.097] fs.protected_symlinks = 1 [2025-09-24 17:21:36.113] kernel.modules_disabled = 1 [2025-09-24 17:21:36.304] [2025-09-24 17:21:36.304] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:21:37.599] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:21:45.278] SBL1:1210.0.1.0 [2025-09-24 17:21:45.310] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:21:46.893] SBL2:1210.0.1.0 [2025-09-24 17:21:46.925] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:21:47.037] j-A [2025-09-24 17:21:54.411] The R5 Autosar Classic is running [2025-09-24 17:21:54.411] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:21:54.411] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:21:55.019] INIT: version 2.96 booting [2025-09-24 17:21:55.130] INIT: Entering runlevel: 5 [2025-09-24 17:21:55.290] mtd24 attached [2025-09-24 17:21:55.290] mtd28 attached [2025-09-24 17:21:55.338] ubi0:textures is mounted. [2025-09-24 17:21:55.338] mtd32 attached [2025-09-24 17:21:55.354] ubi1:animations is mounted. [2025-09-24 17:21:55.423] RTNETLINK answers: File exists [2025-09-24 17:21:55.423] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:21:55.423] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:21:55.423] ubi2:dml_code is mounted. [2025-09-24 17:21:55.423] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:21:55.423] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:21:55.423] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:21:55.423] data.LB_FadeInType0=100 [2025-09-24 17:21:55.423] data.CHLH_FadeInType0=0 [2025-09-24 17:21:55.423] data.WU_FadeInDelay=0 [2025-09-24 17:21:55.423] max_time_out=0 [2025-09-24 17:21:55.423] No splash screen [2025-09-24 17:21:55.423] stop dss Done [2025-09-24 17:21:55.501] /dev/mem opened. [2025-09-24 17:21:55.501] Memory mapped at address 0xffffa500f000. [2025-09-24 17:21:55.501] Read at address 0x00600018 (0xffffa500f018): 0x00000000 [2025-09-24 17:21:55.501] Write at address 0x00600018 (0xffffa500f018): 0x00400040, readback 0x00400040 [2025-09-24 17:21:55.501] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:21:55.501] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:21:55.709] Loaded PowerVR consumer services. [2025-09-24 17:21:55.773] Waiting data available... [2025-09-24 17:21:55.789] 512+0 records in [2025-09-24 17:21:55.789] 512+0 records out [2025-09-24 17:21:55.837] Starting syslogd/klogd: done [2025-09-24 17:21:55.853] DML Start [2025-09-24 17:21:56.044] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:21:56.268] DML res1: 0 [2025-09-24 17:21:56.598] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:21:56.598] Read Success [2025-09-24 17:21:56.598] Verifying certificate... [2025-09-24 17:21:56.869] Verified OK [2025-09-24 17:21:56.886] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:21:58.373] Verified OK [2025-09-24 17:21:58.373] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:21:59.050] Verified OK [2025-09-24 17:21:59.050] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:22:01.864] fs.protected_hardlinks = 1 [2025-09-24 17:22:01.864] fs.protected_symlinks = 1 [2025-09-24 17:22:01.880] kernel.modules_disabled = 1 [2025-09-24 17:22:02.056] [2025-09-24 17:22:02.056] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:22:03.294] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:22:10.982] SBL1:1210.0.1.0 [2025-09-24 17:22:11.013] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:22:12.596] SBL2:1210.0.1.0 [2025-09-24 17:22:12.628] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 17:22:12.740] j-A [2025-09-24 17:22:20.114] The R5 Autosar Classic is running [2025-09-24 17:22:20.114] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:22:20.114] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:22:20.721] INIT: version 2.96 booting [2025-09-24 17:22:20.833] INIT: Entering runlevel: 5 [2025-09-24 17:22:20.977] mtd28 attached [2025-09-24 17:22:20.993] mtd32 attached [2025-09-24 17:22:21.009] mtd24 attached [2025-09-24 17:22:21.041] ubi0:animations is mounted. [2025-09-24 17:22:21.057] RTNETLINK answers: File exists [2025-09-24 17:22:21.057] ubi2:textures is mounted. [2025-09-24 17:22:21.106] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:22:21.106] ubi1:dml_code is mounted. [2025-09-24 17:22:21.106] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:22:21.106] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:22:21.106] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:22:21.106] data.LB_FadeInType0=100 [2025-09-24 17:22:21.106] data.CHLH_FadeInType0=0 [2025-09-24 17:22:21.106] data.WU_FadeInDelay=0 [2025-09-24 17:22:21.106] max_time_out=0 [2025-09-24 17:22:21.106] No splash screen [2025-09-24 17:22:21.106] stop dss Done [2025-09-24 17:22:21.106] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:22:21.187] /dev/mem opened. [2025-09-24 17:22:21.187] Memory mapped at address 0xffffad70e000. [2025-09-24 17:22:21.187] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:22:21.187] Read at address 0x00600018 (0xffffad70e018): 0x00000000 [2025-09-24 17:22:21.187] Write at address 0x00600018 (0xffffad70e018): 0x00400040, readback 0x00400040 [2025-09-24 17:22:21.187] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:22:21.299] Loaded PowerVR consumer services. [2025-09-24 17:22:21.458] Waiting data available... [2025-09-24 17:22:21.490] 512+0 records in [2025-09-24 17:22:21.490] 512+0 records out [2025-09-24 17:22:21.506] Starting syslogd/klogd: done [2025-09-24 17:22:21.539] DML Start [2025-09-24 17:22:21.699] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:22:21.907] DML res1: 0 [2025-09-24 17:22:22.393] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:22:22.393] Read Success [2025-09-24 17:22:22.393] Verifying certificate... [2025-09-24 17:22:22.633] Verified OK [2025-09-24 17:22:22.649] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:22:24.455] Verified OK [2025-09-24 17:22:24.455] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:22:25.010] Verified OK [2025-09-24 17:22:25.010] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:22:27.472] fs.protected_hardlinks = 1 [2025-09-24 17:22:27.472] fs.protected_symlinks = 1 [2025-09-24 17:22:27.488] kernel.modules_disabled = 1 [2025-09-24 17:22:27.681] [2025-09-24 17:22:27.681] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:22:28.944] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:22:36.687] SBL1:1210.0.1.0 [2025-09-24 17:22:36.719] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:22:38.302] SBL2:1210.0.1.0 [2025-09-24 17:22:38.334] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:22:38.446] j-A [2025-09-24 17:22:45.820] The R5 Autosar Classic is running [2025-09-24 17:22:45.820] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:22:45.820] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:22:46.427] INIT: version 2.96 booting [2025-09-24 17:22:46.539] INIT: Entering runlevel: 5 [2025-09-24 17:22:46.683] mtd28 attached [2025-09-24 17:22:46.699] mtd24 attached [2025-09-24 17:22:46.715] mtd32 attached [2025-09-24 17:22:46.731] ubi0:animations is mounted. [2025-09-24 17:22:46.763] RTNETLINK answers: File exists [2025-09-24 17:22:46.763] ubi1:textures is mounted. [2025-09-24 17:22:46.824] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:22:46.824] ubi2:dml_code is mounted. [2025-09-24 17:22:46.824] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:22:46.824] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:22:46.824] data.LB_FadeInType0=100 [2025-09-24 17:22:46.824] data.CHLH_FadeInType0=0 [2025-09-24 17:22:46.824] data.WU_FadeInDelay=0 [2025-09-24 17:22:46.824] max_time_out=0 [2025-09-24 17:22:46.824] No splash screen [2025-09-24 17:22:46.824] stop dss Done [2025-09-24 17:22:46.824] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:22:46.824] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:22:46.872] /dev/mem opened. [2025-09-24 17:22:46.898] Memory mapped at address 0xffff94322000. [2025-09-24 17:22:46.898] Read at address 0x00600018 (0xffff94322018): 0x00000000 [2025-09-24 17:22:46.898] Write at address 0x00600018 (0xffff94322018): 0x00400040, readback 0x00400040 [2025-09-24 17:22:46.929] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:22:46.929] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:22:47.056] Loaded PowerVR consumer services. [2025-09-24 17:22:47.185] Waiting data available... [2025-09-24 17:22:47.201] 512+0 records in [2025-09-24 17:22:47.201] 512+0 records out [2025-09-24 17:22:47.217] Starting syslogd/klogd: done [2025-09-24 17:22:47.249] DML Start [2025-09-24 17:22:47.441] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:22:47.633] DML res1: 0 [2025-09-24 17:22:48.056] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:22:48.056] Read Success [2025-09-24 17:22:48.056] Verifying certificate... [2025-09-24 17:22:48.343] Verified OK [2025-09-24 17:22:48.360] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:22:50.165] Verified OK [2025-09-24 17:22:50.165] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:22:50.692] Verified OK [2025-09-24 17:22:50.692] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:22:53.186] fs.protected_hardlinks = 1 [2025-09-24 17:22:53.186] fs.protected_symlinks = 1 [2025-09-24 17:22:53.202] kernel.modules_disabled = 1 [2025-09-24 17:22:53.410] [2025-09-24 17:22:53.410] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:22:54.651] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:22:56.971] @SBL1:1210.0.1.0 [2025-09-24 17:23:02.421] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:23:04.004] SBL2:1210.0.1.0 [2025-09-24 17:23:04.036] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:23:04.148] j-A [2025-09-24 17:23:11.522] The R5 Autosar Classic is running [2025-09-24 17:23:11.522] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:23:11.522] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:23:12.130] INIT: version 2.96 booting [2025-09-24 17:23:12.241] INIT: Entering runlevel: 5 [2025-09-24 17:23:12.386] mtd24 attached [2025-09-24 17:23:12.402] mtd32 attached [2025-09-24 17:23:12.418] mtd28 attached [2025-09-24 17:23:12.434] ubi0:textures is mounted. [2025-09-24 17:23:12.450] ubi1:dml_code is mounted. [2025-09-24 17:23:12.466] RTNETLINK answers: File exists [2025-09-24 17:23:12.521] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:23:12.521] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:23:12.521] ubi2:animations is mounted. [2025-09-24 17:23:12.521] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:23:12.521] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:23:12.521] data.LB_FadeInType0=100 [2025-09-24 17:23:12.521] data.CHLH_FadeInType0=0 [2025-09-24 17:23:12.521] data.WU_FadeInDelay=0 [2025-09-24 17:23:12.521] max_time_out=0 [2025-09-24 17:23:12.521] No splash screen [2025-09-24 17:23:12.521] stop dss Done [2025-09-24 17:23:12.521] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:23:12.568] /dev/mem opened. [2025-09-24 17:23:12.600] Memory mapped at address 0xffff8830a000. [2025-09-24 17:23:12.600] Read at address 0x00600018 (0xffff8830a018): 0x00000000 [2025-09-24 17:23:12.600] Write at address 0x00600018 (0xffff8830a018): 0x00400040, readback 0x00400040 [2025-09-24 17:23:12.600] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:23:12.617] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:23:12.776] Loaded PowerVR consumer services. [2025-09-24 17:23:12.872] Waiting data available... [2025-09-24 17:23:12.904] 512+0 records in [2025-09-24 17:23:12.904] 512+0 records out [2025-09-24 17:23:12.936] Starting syslogd/klogd: done [2025-09-24 17:23:12.952] DML Start [2025-09-24 17:23:13.128] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:23:13.320] DML res1: 0 [2025-09-24 17:23:13.784] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:23:13.805] Read Success [2025-09-24 17:23:13.805] Verifying certificate... [2025-09-24 17:23:14.028] Verified OK [2025-09-24 17:23:14.044] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:23:15.787] Verified OK [2025-09-24 17:23:15.787] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:23:16.392] Verified OK [2025-09-24 17:23:16.392] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:23:18.884] fs.protected_hardlinks = 1 [2025-09-24 17:23:18.884] fs.protected_symlinks = 1 [2025-09-24 17:23:18.884] kernel.modules_disabled = 1 [2025-09-24 17:23:19.076] [2025-09-24 17:23:19.076] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:23:20.386] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:23:28.072] SBL1:1210.0.1.0 [2025-09-24 17:23:28.120] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:23:29.686] SBL2:1210.0.1.0 [2025-09-24 17:23:29.734] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:23:29.846] j-A [2025-09-24 17:23:37.216] The R5 Autosar Classic is running [2025-09-24 17:23:37.216] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:23:37.216] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:23:37.823] INIT: version 2.96 booting [2025-09-24 17:23:37.934] INIT: Entering runlevel: 5 [2025-09-24 17:23:38.079] mtd24 attached [2025-09-24 17:23:38.095] mtd28 attached [2025-09-24 17:23:38.111] mtd32 attached [2025-09-24 17:23:38.159] ubi0:textures is mounted. [2025-09-24 17:23:38.159] RTNETLINK answers: File exists [2025-09-24 17:23:38.220] ubi1:animations is mounted. [2025-09-24 17:23:38.220] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:23:38.220] ubi2:dml_code is mounted. [2025-09-24 17:23:38.220] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:23:38.220] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:23:38.220] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:23:38.220] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:23:38.220] data.LB_FadeInType0=100 [2025-09-24 17:23:38.220] data.CHLH_FadeInType0=0 [2025-09-24 17:23:38.220] data.WU_FadeInDelay=0 [2025-09-24 17:23:38.220] max_time_out=0 [2025-09-24 17:23:38.220] No splash screen [2025-09-24 17:23:38.220] stop dss Done [2025-09-24 17:23:38.315] /dev/mem opened. [2025-09-24 17:23:38.315] Memory mapped at address 0xffffbe8a5000. [2025-09-24 17:23:38.315] Read at address 0x00600018 (0xffffbe8a5018): 0x00000000 [2025-09-24 17:23:38.315] Write at address 0x00600018 (0xffffbe8a5018): 0x00400040, readback 0x00400040 [2025-09-24 17:23:38.315] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:23:38.315] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:23:38.394] Loaded PowerVR consumer services. [2025-09-24 17:23:38.570] Waiting data available... [2025-09-24 17:23:38.586] 512+0 records in [2025-09-24 17:23:38.586] 512+0 records out [2025-09-24 17:23:38.634] Starting syslogd/klogd: done [2025-09-24 17:23:38.649] DML Start [2025-09-24 17:23:38.794] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:23:38.986] DML res1: 0 [2025-09-24 17:23:39.543] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:23:39.543] Read Success [2025-09-24 17:23:39.543] Verifying certificate... [2025-09-24 17:23:39.767] Verified OK [2025-09-24 17:23:39.783] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:23:41.358] Verified OK [2025-09-24 17:23:41.358] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:23:41.992] Verified OK [2025-09-24 17:23:41.992] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:23:44.565] fs.protected_hardlinks = 1 [2025-09-24 17:23:44.565] fs.protected_symlinks = 1 [2025-09-24 17:23:44.565] kernel.modules_disabled = 1 [2025-09-24 17:23:44.757] [2025-09-24 17:23:44.757] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:23:46.088] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:23:53.798] SBL1:1210.0.1.0 [2025-09-24 17:23:53.830] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:23:55.413] SBL2:1210.0.1.0 [2025-09-24 17:23:55.461] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:23:55.557] j-A [2025-09-24 17:24:02.912] The R5 Autosar Classic is running [2025-09-24 17:24:02.912] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:24:02.933] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:24:03.541] INIT: version 2.96 booting [2025-09-24 17:24:03.652] INIT: Entering runlevel: 5 [2025-09-24 17:24:03.812] mtd32 attached [2025-09-24 17:24:03.812] mtd28 attached [2025-09-24 17:24:03.828] mtd24 attached [2025-09-24 17:24:03.911] RTNETLINK answers: File exists [2025-09-24 17:24:03.911] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:24:03.911] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:24:03.911] ubi1:animations is mounted. [2025-09-24 17:24:03.911] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:24:03.911] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:24:03.911] ubi0:dml_code is mounted. [2025-09-24 17:24:03.911] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:24:03.911] ubi2:textures is mounted. [2025-09-24 17:24:03.935] data.LB_FadeInType0=100 [2025-09-24 17:24:03.935] data.CHLH_FadeInType0=0 [2025-09-24 17:24:03.935] data.WU_FadeInDelay=0 [2025-09-24 17:24:03.935] max_time_out=0 [2025-09-24 17:24:03.935] No splash screen [2025-09-24 17:24:03.935] stop dss Done [2025-09-24 17:24:03.967] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:24:03.967] /dev/mem opened. [2025-09-24 17:24:03.967] Memory mapped at address 0xffff8a87e000. [2025-09-24 17:24:04.000] Read at address 0x00600018 (0xffff8a87e018): 0x00000000 [2025-09-24 17:24:04.000] Write at address 0x00600018 (0xffff8a87e018): 0x00400040, readback 0x00400040 [2025-09-24 17:24:04.000] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:24:04.193] Loaded PowerVR consumer services. [2025-09-24 17:24:04.304] Waiting data available... [2025-09-24 17:24:04.320] 512+0 records in [2025-09-24 17:24:04.320] 512+0 records out [2025-09-24 17:24:04.352] Starting syslogd/klogd: done [2025-09-24 17:24:04.368] DML Start [2025-09-24 17:24:04.576] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:24:04.767] DML res1: 0 [2025-09-24 17:24:05.221] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:24:05.221] Read Success [2025-09-24 17:24:05.221] Verifying certificate... [2025-09-24 17:24:05.461] Verified OK [2025-09-24 17:24:05.477] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:24:07.181] Verified OK [2025-09-24 17:24:07.181] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:24:07.766] Verified OK [2025-09-24 17:24:07.766] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:24:10.437] fs.protected_hardlinks = 1 [2025-09-24 17:24:10.453] fs.protected_symlinks = 1 [2025-09-24 17:24:10.453] kernel.modules_disabled = 1 [2025-09-24 17:24:10.629] [2025-09-24 17:24:10.629] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:24:11.807] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:24:19.510] SBL1:1210.0.1.0 [2025-09-24 17:24:19.542] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:24:21.125] SBL2:1210.0.1.0 [2025-09-24 17:24:21.156] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:24:21.269] j-A [2025-09-24 17:24:28.644] The R5 Autosar Classic is running [2025-09-24 17:24:28.644] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:24:28.644] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:24:29.252] INIT: version 2.96 booting [2025-09-24 17:24:29.347] INIT: Entering runlevel: 5 [2025-09-24 17:24:29.507] mtd32 attached [2025-09-24 17:24:29.523] mtd24 attached [2025-09-24 17:24:29.539] mtd28 attached [2025-09-24 17:24:29.587] RTNETLINK answers: File exists [2025-09-24 17:24:29.587] ubi1:textures is mounted. [2025-09-24 17:24:29.649] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:24:29.649] ubi2:animations is mounted. [2025-09-24 17:24:29.649] ubi0:dml_code is mounted. [2025-09-24 17:24:29.649] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:24:29.649] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:24:29.649] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:24:29.649] data.LB_FadeInType0=100 [2025-09-24 17:24:29.649] data.CHLH_FadeInType0=0 [2025-09-24 17:24:29.649] data.WU_FadeInDelay=0 [2025-09-24 17:24:29.649] max_time_out=0 [2025-09-24 17:24:29.649] No splash screen [2025-09-24 17:24:29.649] stop dss Done [2025-09-24 17:24:29.649] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:24:29.714] /dev/mem opened. [2025-09-24 17:24:29.714] Memory mapped at address 0xffffb448d000. [2025-09-24 17:24:29.714] Read at address 0x00600018 (0xffffb448d018): 0x00000000 [2025-09-24 17:24:29.714] Write at address 0x00600018 (0xffffb448d018): 0x00400040, readback 0x00400040 [2025-09-24 17:24:29.742] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:24:29.742] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:24:29.822] Loaded PowerVR consumer services. [2025-09-24 17:24:30.014] Waiting data available... [2025-09-24 17:24:30.030] 512+0 records in [2025-09-24 17:24:30.030] 512+0 records out [2025-09-24 17:24:30.078] Starting syslogd/klogd: done [2025-09-24 17:24:30.094] DML Start [2025-09-24 17:24:30.270] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:24:30.509] DML res1: 0 [2025-09-24 17:24:30.925] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:24:30.925] Read Success [2025-09-24 17:24:30.941] Verifying certificate... [2025-09-24 17:24:31.197] Verified OK [2025-09-24 17:24:31.244] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:24:33.003] Verified OK [2025-09-24 17:24:33.003] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:24:33.541] Verified OK [2025-09-24 17:24:33.541] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:24:36.050] fs.protected_hardlinks = 1 [2025-09-24 17:24:36.067] fs.protected_symlinks = 1 [2025-09-24 17:24:36.067] kernel.modules_disabled = 1 [2025-09-24 17:24:36.258] [2025-09-24 17:24:36.258] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:24:37.509] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:24:45.221] SBL1:1210.0.1.0 [2025-09-24 17:24:45.269] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:24:46.835] SBL2:1210.0.1.0 [2025-09-24 17:24:46.883] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:24:46.980] j-A [2025-09-24 17:24:54.334] The R5 Autosar Classic is running [2025-09-24 17:24:54.359] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:24:54.359] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:24:54.966] INIT: version 2.96 booting [2025-09-24 17:24:55.079] INIT: Entering runlevel: 5 [2025-09-24 17:24:55.238] mtd24 attached [2025-09-24 17:24:55.238] mtd28 attached [2025-09-24 17:24:55.254] mtd32 attached [2025-09-24 17:24:55.286] ubi0:textures is mounted. [2025-09-24 17:24:55.302] RTNETLINK answers: File exists [2025-09-24 17:24:55.368] ubi1:animations is mounted. [2025-09-24 17:24:55.368] ubi2:dml_code is mounted. [2025-09-24 17:24:55.368] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:24:55.368] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:24:55.368] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:24:55.368] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:24:55.368] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:24:55.368] data.LB_FadeInType0=100 [2025-09-24 17:24:55.368] data.CHLH_FadeInType0=0 [2025-09-24 17:24:55.368] data.WU_FadeInDelay=0 [2025-09-24 17:24:55.368] max_time_out=0 [2025-09-24 17:24:55.368] No splash screen [2025-09-24 17:24:55.368] stop dss Done [2025-09-24 17:24:55.401] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:24:55.440] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:24:55.440] /dev/mem opened. [2025-09-24 17:24:55.440] Memory mapped at address 0xffffab7df000. [2025-09-24 17:24:55.440] Read at address 0x00600018 (0xffffab7df018): 0x00000000 [2025-09-24 17:24:55.440] Write at address 0x00600018 (0xffffab7df018): 0x00400040, readback 0x00400040 [2025-09-24 17:24:55.551] Loaded PowerVR consumer services. [2025-09-24 17:24:55.728] Waiting data available... [2025-09-24 17:24:55.743] 512+0 records in [2025-09-24 17:24:55.743] 512+0 records out [2025-09-24 17:24:55.791] Starting syslogd/klogd: done [2025-09-24 17:24:55.807] DML Start [2025-09-24 17:24:55.983] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:24:56.238] DML res1: 0 [2025-09-24 17:24:56.669] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:24:56.669] Read Success [2025-09-24 17:24:56.669] Verifying certificate... [2025-09-24 17:24:56.894] Verified OK [2025-09-24 17:24:56.910] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:24:58.506] Verified OK [2025-09-24 17:24:58.506] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:24:59.151] Verified OK [2025-09-24 17:24:59.151] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:25:01.832] fs.protected_hardlinks = 1 [2025-09-24 17:25:01.832] fs.protected_symlinks = 1 [2025-09-24 17:25:01.832] kernel.modules_disabled = 1 [2025-09-24 17:25:02.008] [2025-09-24 17:25:02.008] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:25:03.238] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:25:10.919] SBL1:1210.0.1.0 [2025-09-24 17:25:10.951] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:25:12.533] SBL2:1210.0.1.0 [2025-09-24 17:25:12.581] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:25:12.677] j-A [2025-09-24 17:25:20.031] The R5 Autosar Classic is running [2025-09-24 17:25:20.055] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:25:20.055] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:25:20.663] INIT: version 2.96 booting [2025-09-24 17:25:20.775] INIT: Entering runlevel: 5 [2025-09-24 17:25:20.934] mtd24 attached [2025-09-24 17:25:20.934] mtd28 attached [2025-09-24 17:25:20.950] mtd32 attached [2025-09-24 17:25:20.998] ubi0:textures is mounted. [2025-09-24 17:25:20.998] ubi1:animations is mounted. [2025-09-24 17:25:21.069] RTNETLINK answers: File exists [2025-09-24 17:25:21.069] ubi2:dml_code is mounted. [2025-09-24 17:25:21.069] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:25:21.069] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:25:21.069] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:25:21.069] data.LB_FadeInType0=100 [2025-09-24 17:25:21.069] data.CHLH_FadeInType0=0 [2025-09-24 17:25:21.069] data.WU_FadeInDelay=0 [2025-09-24 17:25:21.069] max_time_out=0 [2025-09-24 17:25:21.069] No splash screen [2025-09-24 17:25:21.069] stop dss Done [2025-09-24 17:25:21.069] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:25:21.069] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:25:21.101] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:25:21.140] /dev/mem opened. [2025-09-24 17:25:21.140] Memory mapped at address 0xffffb5dc1000. [2025-09-24 17:25:21.140] Read at address 0x00600018 (0xffffb5dc1018): 0x00000000 [2025-09-24 17:25:21.140] Write at address 0x00600018 (0xffffb5dc1018): 0x00400040, readback 0x00400040 [2025-09-24 17:25:21.140] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:25:21.283] Loaded PowerVR consumer services. [2025-09-24 17:25:21.412] Waiting data available... [2025-09-24 17:25:21.444] 512+0 records in [2025-09-24 17:25:21.444] 512+0 records out [2025-09-24 17:25:21.492] Starting syslogd/klogd: done [2025-09-24 17:25:21.508] DML Start [2025-09-24 17:25:21.684] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:25:21.892] DML res1: 0 [2025-09-24 17:25:22.336] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:25:22.336] Read Success [2025-09-24 17:25:22.336] Verifying certificate... [2025-09-24 17:25:22.576] Verified OK [2025-09-24 17:25:22.576] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:25:24.319] Verified OK [2025-09-24 17:25:24.335] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:25:24.933] Verified OK [2025-09-24 17:25:24.933] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:25:27.491] fs.protected_hardlinks = 1 [2025-09-24 17:25:27.491] fs.protected_symlinks = 1 [2025-09-24 17:25:27.507] kernel.modules_disabled = 1 [2025-09-24 17:25:27.699] [2025-09-24 17:25:27.699] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:25:28.910] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:25:36.630] SBL1:1210.0.1.0 [2025-09-24 17:25:36.662] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:25:38.245] SBL2:1210.0.1.0 [2025-09-24 17:25:38.277] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:25:38.388] j-A [2025-09-24 17:25:45.744] The R5 Autosar Classic is running [2025-09-24 17:25:45.744] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:25:45.764] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:25:46.371] INIT: version 2.96 booting [2025-09-24 17:25:46.484] INIT: Entering runlevel: 5 [2025-09-24 17:25:46.643] mtd24 attached [2025-09-24 17:25:46.643] mtd28 attached [2025-09-24 17:25:46.659] mtd32 attached [2025-09-24 17:25:46.707] ubi0:textures is mounted. [2025-09-24 17:25:46.723] RTNETLINK answers: File exists [2025-09-24 17:25:46.775] ubi2:dml_code is mounted. [2025-09-24 17:25:46.775] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:25:46.775] ubi1:animations is mounted. [2025-09-24 17:25:46.775] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:25:46.775] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:25:46.775] data.LB_FadeInType0=100 [2025-09-24 17:25:46.775] data.CHLH_FadeInType0=0 [2025-09-24 17:25:46.775] data.WU_FadeInDelay=0 [2025-09-24 17:25:46.775] max_time_out=0 [2025-09-24 17:25:46.775] No splash screen [2025-09-24 17:25:46.775] stop dss Done [2025-09-24 17:25:46.775] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:25:46.775] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:25:46.844] /dev/mem opened. [2025-09-24 17:25:46.844] Memory mapped at address 0xffffa1a3b000. [2025-09-24 17:25:46.844] Read at address 0x00600018 (0xffffa1a3b018): 0x00000000 [2025-09-24 17:25:46.844] Write at address 0x00600018 (0xffffa1a3b018): 0x00400040, readback 0x00400040 [2025-09-24 17:25:46.844] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:25:46.844] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:25:46.939] Loaded PowerVR consumer services. [2025-09-24 17:25:47.131] Waiting data available... [2025-09-24 17:25:47.163] 512+0 records in [2025-09-24 17:25:47.163] 512+0 records out [2025-09-24 17:25:47.195] Starting syslogd/klogd: done [2025-09-24 17:25:47.211] DML Start [2025-09-24 17:25:47.402] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:25:47.675] DML res1: 0 [2025-09-24 17:25:48.010] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:25:48.035] Read Success [2025-09-24 17:25:48.035] Verifying certificate... [2025-09-24 17:25:48.259] Verified OK [2025-09-24 17:25:48.275] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:25:49.834] Verified OK [2025-09-24 17:25:49.834] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:25:50.435] Verified OK [2025-09-24 17:25:50.435] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:25:53.153] fs.protected_hardlinks = 1 [2025-09-24 17:25:53.180] fs.protected_symlinks = 1 [2025-09-24 17:25:53.180] kernel.modules_disabled = 1 [2025-09-24 17:25:53.356] [2025-09-24 17:25:53.356] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:25:54.664] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:26:02.331] SBL1:1210.0.1.0 [2025-09-24 17:26:02.379] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:26:03.946] SBL2:1210.0.1.0 [2025-09-24 17:26:03.994] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:26:04.106] j-A [2025-09-24 17:26:11.479] The R5 Autosar Classic is running [2025-09-24 17:26:11.479] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:26:11.479] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:26:12.088] INIT: version 2.96 booting [2025-09-24 17:26:12.199] INIT: Entering runlevel: 5 [2025-09-24 17:26:12.359] mtd28 attached [2025-09-24 17:26:12.359] mtd24 attached [2025-09-24 17:26:12.375] mtd32 attached [2025-09-24 17:26:12.423] RTNETLINK answers: File exists [2025-09-24 17:26:12.469] ubi0:animations is mounted. [2025-09-24 17:26:12.469] ubi1:textures is mounted. [2025-09-24 17:26:12.469] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:26:12.469] ubi2:dml_code is mounted. [2025-09-24 17:26:12.469] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:26:12.469] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:26:12.469] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:26:12.469] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:26:12.469] data.LB_FadeInType0=100 [2025-09-24 17:26:12.490] data.CHLH_FadeInType0=0 [2025-09-24 17:26:12.490] data.WU_FadeInDelay=0 [2025-09-24 17:26:12.490] max_time_out=0 [2025-09-24 17:26:12.490] No splash screen [2025-09-24 17:26:12.490] stop dss Done [2025-09-24 17:26:12.522] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:26:12.560] /dev/mem opened. [2025-09-24 17:26:12.560] Memory mapped at address 0xffffb5156000. [2025-09-24 17:26:12.560] Read at address 0x00600018 (0xffffb5156018): 0x00000000 [2025-09-24 17:26:12.560] Write at address 0x00600018 (0xffffb5156018): 0x00400040, readback 0x00400040 [2025-09-24 17:26:12.560] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:26:12.847] Loaded PowerVR consumer services. [2025-09-24 17:26:12.879] Waiting data available... [2025-09-24 17:26:12.895] 512+0 records in [2025-09-24 17:26:12.895] 512+0 records out [2025-09-24 17:26:12.928] Starting syslogd/klogd: done [2025-09-24 17:26:12.944] DML Start [2025-09-24 17:26:13.136] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:26:13.328] DML res1: 0 [2025-09-24 17:26:13.720] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:26:13.720] Read Success [2025-09-24 17:26:13.720] Verifying certificate... [2025-09-24 17:26:13.992] Verified OK [2025-09-24 17:26:14.008] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:26:15.661] Verified OK [2025-09-24 17:26:15.661] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:26:16.276] Verified OK [2025-09-24 17:26:16.276] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:26:18.850] fs.protected_hardlinks = 1 [2025-09-24 17:26:18.850] fs.protected_symlinks = 1 [2025-09-24 17:26:18.882] kernel.modules_disabled = 1 [2025-09-24 17:26:19.073] [2025-09-24 17:26:19.073] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:26:20.385] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:26:22.627] SBL1:1210.0.1.0 [2025-09-24 17:26:28.093] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:26:29.676] SBL2:1210.0.1.0 [2025-09-24 17:26:29.708] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:26:29.820] j-A [2025-09-24 17:26:37.173] The R5 Autosar Classic is running [2025-09-24 17:26:37.173] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:26:37.194] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:26:37.802] INIT: version 2.96 booting [2025-09-24 17:26:37.914] INIT: Entering runlevel: 5 [2025-09-24 17:26:38.073] mtd32 attached [2025-09-24 17:26:38.089] mtd24 attached [2025-09-24 17:26:38.089] mtd28 attached [2025-09-24 17:26:38.138] ubi0:dml_code is mounted. [2025-09-24 17:26:38.206] RTNETLINK answers: File exists [2025-09-24 17:26:38.206] ubi2:animations is mounted. [2025-09-24 17:26:38.206] ubi1:textures is mounted. [2025-09-24 17:26:38.206] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:26:38.206] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:26:38.206] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:26:38.206] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:26:38.206] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:26:38.206] data.LB_FadeInType0=100 [2025-09-24 17:26:38.206] data.CHLH_FadeInType0=0 [2025-09-24 17:26:38.206] data.WU_FadeInDelay=0 [2025-09-24 17:26:38.206] max_time_out=0 [2025-09-24 17:26:38.206] No splash screen [2025-09-24 17:26:38.206] stop dss Done [2025-09-24 17:26:38.276] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:26:38.276] /dev/mem opened. [2025-09-24 17:26:38.276] Memory mapped at address 0xffffaea94000. [2025-09-24 17:26:38.276] Read at address 0x00600018 (0xffffaea94018): 0x00000000 [2025-09-24 17:26:38.276] Write at address 0x00600018 (0xffffaea94018): 0x00400040, readback 0x00400040 [2025-09-24 17:26:38.276] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:26:38.372] Loaded PowerVR consumer services. [2025-09-24 17:26:38.563] Waiting data available... [2025-09-24 17:26:38.579] 512+0 records in [2025-09-24 17:26:38.579] 512+0 records out [2025-09-24 17:26:38.627] Starting syslogd/klogd: done [2025-09-24 17:26:38.644] DML Start [2025-09-24 17:26:38.803] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:26:39.011] DML res1: 0 [2025-09-24 17:26:39.458] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:26:39.479] Read Success [2025-09-24 17:26:39.479] Verifying certificate... [2025-09-24 17:26:39.736] Verified OK [2025-09-24 17:26:39.752] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:26:41.349] Verified OK [2025-09-24 17:26:41.349] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:26:42.022] Verified OK [2025-09-24 17:26:42.022] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:26:42.773] 5489 GC [0] [2025-09-24 17:26:42.837] 5566 GC [1] [2025-09-24 17:26:42.916] 5637 GC [2] [2025-09-24 17:26:42.980] 5705 GC [3] [2025-09-24 17:26:43.061] 5778 GC [4] [2025-09-24 17:26:43.124] 5854 GC [5] [2025-09-24 17:26:43.204] 5927 GC [6] [2025-09-24 17:26:43.268] 5994 GC [7] [2025-09-24 17:26:43.348] 6056 GC [8] [2025-09-24 17:26:43.412] 6134 GC [9] [2025-09-24 17:26:43.476] 6197 GC [10] [2025-09-24 17:26:43.540] 6258 GC [11] [2025-09-24 17:26:43.604] 6327 GC [12] [2025-09-24 17:26:43.668] 6394 GC [13] [2025-09-24 17:26:43.732] 6445 GC [14] [2025-09-24 17:26:43.780] 6508 GC [15] [2025-09-24 17:26:43.844] 6565 GC [16] [2025-09-24 17:26:43.907] 6637 GC [17] [2025-09-24 17:26:43.971] 6684 GC [18] [2025-09-24 17:26:44.036] 6755 GC [19] [2025-09-24 17:26:44.084] 6808 GC [20] [2025-09-24 17:26:44.148] 6875 GC [21] [2025-09-24 17:26:44.212] 6937 GC [22] [2025-09-24 17:26:44.275] 7004 GC [23] [2025-09-24 17:26:44.339] 7055 GC [24] [2025-09-24 17:26:44.404] 7128 GC [25] [2025-09-24 17:26:44.467] 7185 GC [26] [2025-09-24 17:26:44.531] 7257 GC [27] [2025-09-24 17:26:44.596] 7326 GC [28] [2025-09-24 17:26:44.675] 7398 GC [29] [2025-09-24 17:26:44.675] GC DONE [2025-09-24 17:26:44.707] fs.protected_hardlinks = 1 [2025-09-24 17:26:44.707] fs.protected_symlinks = 1 [2025-09-24 17:26:44.723] kernel.modules_disabled = 1 [2025-09-24 17:26:44.899] [2025-09-24 17:26:44.899] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:26:46.034] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:26:53.776] SBL1:1210.0.1.0 [2025-09-24 17:26:53.824] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:26:55.390] SBL2:1210.0.1.0 [2025-09-24 17:26:55.423] OTP value is: rxDLL 23, txDLL 37, rdDelay 1 [2025-09-24 17:26:55.535] j-A [2025-09-24 17:27:02.888] The R5 Autosar Classic is running [2025-09-24 17:27:02.888] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:27:02.909] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:27:03.516] INIT: version 2.96 booting [2025-09-24 17:27:03.628] INIT: Entering runlevel: 5 [2025-09-24 17:27:03.772] mtd28 attached [2025-09-24 17:27:03.788] mtd24 attached [2025-09-24 17:27:03.804] mtd32 attached [2025-09-24 17:27:03.836] ubi0:animations is mounted. [2025-09-24 17:27:03.852] ubi1:textures is mounted. [2025-09-24 17:27:03.852] RTNETLINK answers: File exists [2025-09-24 17:27:03.879] ubi2:dml_code is mounted. [2025-09-24 17:27:03.879] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:27:03.879] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:27:03.879] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:27:03.912] data.LB_FadeInType0=100 [2025-09-24 17:27:03.912] data.CHLH_FadeInType0=0 [2025-09-24 17:27:03.912] data.WU_FadeInDelay=0 [2025-09-24 17:27:03.912] max_time_out=0 [2025-09-24 17:27:03.912] No splash screen [2025-09-24 17:27:03.912] stop dss Done [2025-09-24 17:27:03.912] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:27:03.912] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:27:03.981] /dev/mem opened. [2025-09-24 17:27:03.981] Memory mapped at address 0xffff982b8000. [2025-09-24 17:27:03.981] Read at address 0x00600018 (0xffff982b8018): 0x00000000 [2025-09-24 17:27:03.981] Write at address 0x00600018 (0xffff982b8018): 0x00400040, readback 0x00400040 [2025-09-24 17:27:04.011] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:27:04.011] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:27:04.155] Loaded PowerVR consumer services. [2025-09-24 17:27:04.187] 512+0 records in [2025-09-24 17:27:04.187] 512+0 records out [2025-09-24 17:27:04.235] Starting syslogd/klogd: Waiting data available... [2025-09-24 17:27:04.267] done [2025-09-24 17:27:04.267] DML Start [2025-09-24 17:27:04.427] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:27:04.619] DML res1: 0 [2025-09-24 17:27:05.163] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:27:05.163] Read Success [2025-09-24 17:27:05.178] Verifying certificate... [2025-09-24 17:27:05.418] Verified OK [2025-09-24 17:27:05.434] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:27:07.065] Verified OK [2025-09-24 17:27:07.066] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:27:07.656] Verified OK [2025-09-24 17:27:07.656] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:27:10.437] fs.protected_hardlinks = 1 [2025-09-24 17:27:10.437] fs.protected_symlinks = 1 [2025-09-24 17:27:10.437] kernel.modules_disabled = 1 [2025-09-24 17:27:10.613] [2025-09-24 17:27:10.613] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:27:11.773] RTNETLINK answers: Cannot assign requested address [2025-09-24 17:27:19.534] SBL1:1210.0.1.0 [2025-09-24 17:27:19.582] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:27:21.149] SBL2:1210.0.1.0 [2025-09-24 17:27:21.180] OTP value is: rxDLL 24, txDLL 38, rdDelay 1 [2025-09-24 17:27:21.292] j-A [2025-09-24 17:27:28.647] The R5 Autosar Classic is running [2025-09-24 17:27:28.647] NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty [2025-09-24 17:27:28.668] NOTICE: BL31: Built : 23:20:15, Mar 4 2024 [2025-09-24 17:27:29.275] INIT: version 2.96 booting [2025-09-24 17:27:29.387] INIT: Entering runlevel: 5 [2025-09-24 17:27:29.531] mtd28 attached [2025-09-24 17:27:29.546] mtd32 attached [2025-09-24 17:27:29.562] mtd24 attached [2025-09-24 17:27:29.595] ubi0:animations is mounted. [2025-09-24 17:27:29.668] RTNETLINK answers: File exists [2025-09-24 17:27:29.668] ubi1:dml_code is mounted. [2025-09-24 17:27:29.668] net.ipv6.conf.all.addr_gen_mode = 1 [2025-09-24 17:27:29.668] ubi2:textures is mounted. [2025-09-24 17:27:29.668] net.ipv6.conf.all.disable_ipv6 = 1 [2025-09-24 17:27:29.668] net.ipv6.conf.all.disable_ipv6 = 0 [2025-09-24 17:27:29.668] net.ipv6.conf.eth0.dad_transmits = 0 [2025-09-24 17:27:29.668] net.ipv6.neigh.eth0/2.retrans_time_ms = 0 [2025-09-24 17:27:29.668] data.LB_FadeInType0=100 [2025-09-24 17:27:29.668] data.CHLH_FadeInType0=0 [2025-09-24 17:27:29.668] data.WU_FadeInDelay=0 [2025-09-24 17:27:29.668] max_time_out=0 [2025-09-24 17:27:29.668] No splash screen [2025-09-24 17:27:29.668] stop dss Done [2025-09-24 17:27:29.757] /dev/mem opened. [2025-09-24 17:27:29.757] Memory mapped at address 0xffffaf0b6000. [2025-09-24 17:27:29.757] Read at address 0x00600018 (0xffffaf0b6018): 0x00000000 [2025-09-24 17:27:29.757] Write at address 0x00600018 (0xffffaf0b6018): 0x00400040, readback 0x00400040 [2025-09-24 17:27:29.757] net.ipv6.conf.all.addr_gen_mode = 0 [2025-09-24 17:27:29.757] net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 [2025-09-24 17:27:29.934] Loaded PowerVR consumer services. [2025-09-24 17:27:29.949] 512+0 records in [2025-09-24 17:27:29.965] 512+0 records out [2025-09-24 17:27:29.997] Waiting data available... [2025-09-24 17:27:30.013] Starting syslogd/klogd: done [2025-09-24 17:27:30.029] DML Start [2025-09-24 17:27:30.174] Esel version: 3.102.0.0-IAA10.27 [2025-09-24 17:27:30.414] DML res1: 0 [2025-09-24 17:27:30.914] Read DML Algo certificate (mtd31) and save to file [2025-09-24 17:27:30.914] Read Success [2025-09-24 17:27:30.914] Verifying certificate... [2025-09-24 17:27:31.138] Verified OK [2025-09-24 17:27:31.154] [Authenticate]: The dataset 1 checks CRC PASSED !!! [2025-09-24 17:27:32.784] Verified OK [2025-09-24 17:27:32.805] [Authenticate]: The dataset 2 checks CRC PASSED !!! [2025-09-24 17:27:33.409] Verified OK [2025-09-24 17:27:33.409] [Authenticate]: The dataset 3 checks CRC PASSED !!! [2025-09-24 17:27:36.191] fs.protected_hardlinks = 1 [2025-09-24 17:27:36.207] fs.protected_symlinks = 1 [2025-09-24 17:27:36.207] kernel.modules_disabled = 1 [2025-09-24 17:27:36.399] [2025-09-24 17:27:36.399] am62xx-zdml3 login: Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed [2025-09-24 17:27:37.550] RTNETLINK answers: Cannot assign requested address